WorldWideScience

Sample records for target safety standard

  1. IAEA Safety Standards

    International Nuclear Information System (INIS)

    2016-09-01

    The IAEA Safety Standards Series comprises publications of a regulatory nature covering nuclear safety, radiation protection, radioactive waste management, the transport of radioactive material, the safety of nuclear fuel cycle facilities and management systems. These publications are issued under the terms of Article III of the IAEA’s Statute, which authorizes the IAEA to establish “standards of safety for protection of health and minimization of danger to life and property”. Safety standards are categorized into: • Safety Fundamentals, stating the basic objective, concepts and principles of safety; • Safety Requirements, establishing the requirements that must be fulfilled to ensure safety; and • Safety Guides, recommending measures for complying with these requirements for safety. For numbering purposes, the IAEA Safety Standards Series is subdivided into General Safety Requirements and General Safety Guides (GSR and GSG), which are applicable to all types of facilities and activities, and Specific Safety Requirements and Specific Safety Guides (SSR and SSG), which are for application in particular thematic areas. This booklet lists all current IAEA Safety Standards, including those forthcoming

  2. Scrutinising safety standards

    Energy Technology Data Exchange (ETDEWEB)

    Pietersen, C.M. [Safety Service Center BV (Netherlands)

    2001-01-01

    Until the introduction of the International Electrotechnical Commission's standard IEC 61508, there was no provision for relating risks to people and the environment, to the risks of financial loss. Although IEC 61508 fills most of the gaps in the process industry, there are still some loopholes. Four points covered by the standard are listed. It is expected that the standard will lead to an optimum cost-benefit situation with 'fit-for-purpose' safety and minimum nuisance shutdowns, or process plant disturbances. It should give clear guidance on 'how safe is safe enough.' IEC 61508 can be implemented through various routes. Insurance companies and regulators are starting to require implementation of the new standard. Five points which need to be ascertained for implementation are listed and diagrams illustrate the IEC 61508 safety lifecycle and the risk-reduction requirements.

  3. Elevating standards, improving safety.

    Science.gov (United States)

    Clarke, Richard

    2014-08-01

    In our latest 'technical guidance' article, Richard Clarke, sales and marketing director at one of the UK's leading lift and escalator specialists, Schindler, examines some of the key issues surrounding the specification, maintenance, and operation of lifts in hospitals to help ensure the highest standards of safety and reliability.

  4. DOE standard: Firearms safety

    International Nuclear Information System (INIS)

    1996-02-01

    Information in this document is applicable to all DOE facilities, elements, and contractors engaged in work that requires the use of firearms as provided by law or contract. The standard in this document provides principles and practices for implementing a safe and effective firearms safety program for protective forces and for non-security use of firearms. This document describes acceptable interpretations and methods for meeting Order requirements

  5. DOE standard: Firearms safety

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    Information in this document is applicable to all DOE facilities, elements, and contractors engaged in work that requires the use of firearms as provided by law or contract. The standard in this document provides principles and practices for implementing a safe and effective firearms safety program for protective forces and for non-security use of firearms. This document describes acceptable interpretations and methods for meeting Order requirements.

  6. The radiation safety standards programme

    International Nuclear Information System (INIS)

    Bilbao, A.A.

    2000-01-01

    In this lecture the development of radiation safety standards by the IAEA which is a statutory function of the IAEA is presented. The latest editions of the basic safety standards published by the IAEA in cooperation with ICRP, FAO, ILO, NEA/OECD, PAHO and WHO are reviewed

  7. Vehicle track interaction safety standards

    Science.gov (United States)

    2014-04-02

    Vehicle/Track Interaction (VTI) Safety Standards aim to : reduce the risk of derailments and other accidents attributable : to the dynamic interaction between moving vehicles and the : track over which they operate. On March 13, 2013, the Federal : R...

  8. Radiation safety standards

    International Nuclear Information System (INIS)

    1975-01-01

    This is a basic document with which all rules and regulations, etc., concerning protection from ionizing radiations of workers and the general population have to conform. Basic concepts, dimensions, units, and terms used in the area of radiation safety are defined. Radiation exposures are sorted out into three categories: A, to personnel; B, to individual members of the popul;tion; and C, to the general population. Critical organs, furthermore, comprise four groups, the first of them being applicable to the whole-body gonads and bone marrow. Category A maximum permissible dose (MPD) to first group critical organs is 5 rem/year; to second group, 15 rem/year; to thrid group, 3O rem/year; and to fourth group, 75 rem/year. These rate figures include doses from both external and internal radiation exposure. Quality factors needed in computing doses from various types of radiation are provided. Permissible planned exposure levels are specified and guidelines given for accidental exposures. A radiation accident is considered to have occurred if the relevant critical organ dose is 5 times the annual MPD for that organ. For individual members of the population (category B), annual somatic doses to first group critical organs shall not exceed 0,5 rem. Population exposure is controlled in terms of genetically significant dose, which shall not exceed 5 rem/30 years. (G.G.)

  9. Safety alarms and European standards

    CERN Document Server

    Nunes, R W

    1999-01-01

    This paper describes the current status and future of the safety-alarm (Alarm-of-Level-3) equipment at CERN. The emphasis is on the classification of these systems in the European standards framework as well as in other relevant international standards. Fire and gas detection systems and evacuation alarms represent the majority (approximately 90%) of the safety-alarm equipment at CERN. We will mainly address issues concerning the functioning of the fire-detection equipment and how it communicates with the Safety Control Room and Technical Control Room. The technological evolution of the equipment will be discussed. We shall also refer to the international and national standards applicable at CERN in the fire-equipment domain.

  10. Radiation safety: New international standards

    International Nuclear Information System (INIS)

    Gonzalez, A.J.

    1994-01-01

    This article highlights an important result of this work for the international harmonization of radiation safety: specifically, it present an overview of the forthcoming International Basic Safety Standards for Protection Against Ionizing Radiation and for the Safety of Radiation Sources - the so-called BSS. They have been jointly developed by six organizations - the Food and Agriculture Organization of the United Nations (FAO), the International Atomic Energy Agency (IAEA), the International Labour Organization (ILO), the Nuclear Energy Agency of the Organization for Economic Co-operation and Development (NEA/OECD), the Pan American Health Organization (PAHO), and the World Health Organization (WHO)

  11. Safety standards of flood defenses

    NARCIS (Netherlands)

    Vrijling, J.K.; Schweckendiek, T.; Kanning, W.

    2011-01-01

    Current design codes like the Eurocode use safety or reliability classes to assign target reliabilities to different types of structures or structural members according to the potential consequences of failure. That, in essence, is a risk-based criterion. A wide range of structures is designed with

  12. Status of the IAEA safety standards programme

    International Nuclear Information System (INIS)

    2002-01-01

    This presentation describes the status of the IAEA safety standards program to May 2002. The safety standards program overcome whole main nuclear implementations as General safety, Nuclear safety, Radiation safety, Radioactive waste safety, and Transport safety. Throughout this report the first column provides the list of published IAEA Safety Standards. The second gives the working identification number (DS) of standards being developed or revised. The bold type indicates standard issued under the authority the Board of Governors, others are issued under authority of the Director General. The last column provides the list of Committees, the first Committee listed has the lead in the preparation and review of the particular standard

  13. Safety Criteria and Standards for Bearing Capacity of Foundation

    Directory of Open Access Journals (Sweden)

    Yanlong Li

    2017-01-01

    Full Text Available This paper focuses on the evaluation standards of factor of safety for foundation stability analysis. The problem of foundation stability is analyzed via the methods of risk analysis of engineering structures and reliability-based design, and the factor of safety for foundation stability is determined by using bearing capacity safety-factor method (BSFM and strength safety-factor method (SSFM. Based on a typical example, the admissible factors of safety were calibrated with a target reliability index specified in relevant standards. Two safety criteria and their standards of bearing capacity of foundation for these two methods (BSFM and SSFM were established. The universality of the safety criteria and their standards for foundation reliability was verified based on the concept of the ratio of safety margin (RSM.

  14. Safety targets for nuclear power plants

    International Nuclear Information System (INIS)

    Herttrich, P.M.

    1985-01-01

    By taking as an example the safety targets of the American nuclear energy authority US-NRC, this paper explains what is meant by global, quantitative safety targets for nuclear power plants and what expectations are associated with the selecton of such safety targets. It is shown how probabilistic methods can be an appropriate completion of proven deterministic methods and what are the sectors where their application may become important in future. (orig./HP) [de

  15. RADWASS update. Radioactive Waste Safety Standards Programme

    International Nuclear Information System (INIS)

    Delattre, D.

    2000-01-01

    By the late 1980s, the issue of radioactive wastes and their management was becoming increasingly politically important. The IAEA responded by establishing a high profile family of safety standards, the Radioactive Waste Safety Standards (RADWASS). By this means, the IAEA intended to draw attention to the fact that well-established procedures for the safe management of radioactive wastes already were in place. The programme was intended to establish an ordered structure for safety documents on waste management and to ensure comprehensive coverage of all relevant subject areas. RADWASS documents are categorized under four subject areas - discharges, predisposal, disposal, and environmental restoration. The programme is overseen through a formalized review and approval mechanism that was established in 1996 for all safety standards activities. The Waste Safety Standards Committee (WASSC) is a standing body of senior regulatory officials with technical expertise in radioactive waste safety. To date, three Safety Requirements and seven Safety Guides have been issued

  16. Safety standards for radioactive waste management

    International Nuclear Information System (INIS)

    Warnecke, E.

    1993-01-01

    The International Atomic Energy Agency (IAEA) has established the Radioactive Waste Safety Standards (RADWASS) programme upon request by its Member States to provide evidence that radioactive waste can be managed safely. The RADWASS programme consists of a series of fifty-five international consensus documents covering all parts of radioactive waste management, i.e. the subject areas: planning; pre-disposal; near surface disposal; geological disposal; U/Th mining and milling; and decommissioning. A single Safety Fundamentals document will set out the basic safety principles for radioactive waste management. Each subject area is headed by a Safety Standard. Twenty-eight Safety Guides and twenty Safety Practices will provide further details for the implementation of safety requirements stated in the Safety Standards. The programme was started in 1991 and is being carried out in three phases (Phase I: 1991-1994; Phase II: 1995-1998; Phase III: post 1998). (author)

  17. Performance standards of road safety management

    Directory of Open Access Journals (Sweden)

    Čabarkapa Milenko R.

    2016-01-01

    Full Text Available Road safety management controlling means the process of finding out the information whether the road safety is improving in a measure to achieve the objectives. The process of control consists of three basic elements: definition of performances and standards, measurement of current performances and comparison with the set standards, and improvement of current performances, if they deviate from the set standards. The performance standards of road safety management system are focused on a performances measurement, in terms of their design and characteristics, in order to support the performances improvement of road safety system and thus, ultimately, improve the road safety. Defining the performance standards of road safety management system, except that determines the design of the system for performances measurement, directly sets requirements whose fulfillment will produce a road safety improvement. The road safety management system, based on the performance standards of road safety, with a focus on results, will produce the continuous improvement of road safety, achieving the long-term 'vision zero', the philosophy of road safety, that human life and health take priority over mobility and other traffic objectives of the road traffic.

  18. The international dimensions of nuclear safety standards

    International Nuclear Information System (INIS)

    Reed, J.M.

    1992-01-01

    The paper reviews the activities of the major international organisations in the field of nuclear safety standards; the International Atomic Energy Agency (IAEA), the OECD's Nuclear Energy Agency (NEA) and the Commission of the European Communities. Each organisation encourages the concept of international nuclear safety standards. After Chernobyl, there were calls for some form of binding international nuclear safety standards. Many Member States of IAEA accepted these Codes as a suitable basis for formulating their national safety standards, but the prevailing view was that voluntary compliance with the Codes was the preferred path. With few reactor vendors in a limited international market, the time may be approaching when an internationally licensable nuclear reactor is needed. Commonly accepted safety standards would be a prerequisite. The paper discusses the issues involved and the complexities of standards making in the international arena. (author)

  19. Standards: An international framework for nuclear safety

    International Nuclear Information System (INIS)

    Versteeg, J.

    2000-01-01

    The IAEA, uniquely among international organizations concerned with the use of radiation, radioactive materials and nuclear energy, has statutory functions to establish safety standards and to provide for their application in Member States. The IAEA also contributes towards another major element of the 'global safety culture', namely the establishment of legally binding international agreements on safety related issues. (author)

  20. 75 FR 17641 - Updating Fire Safety Standards

    Science.gov (United States)

    2010-04-07

    ... industry-wide standards regarding fire safety. With respect to State homes, we are not aware of any... current industry-wide standards regarding fire safety. We are not aware of any significant changes from..., Alcoholism, Claims, Day care, Dental health, Drug abuse, Foreign relations, Government contracts, Grant...

  1. IAEA safety standards and approach to safety of advanced reactors

    International Nuclear Information System (INIS)

    Gasparini, M.

    2004-01-01

    The paper presents an overview of the IAEA safety standards including their overall structure and purpose. A detailed presentation is devoted to the general approach to safety that is embodied in the current safety requirements for the design of nuclear power plants. A safety approach is proposed for the future. This approach can be used as reference for a safe design, for safety assessment and for the preparation of the safety requirements. The method proposes an integration of deterministic and risk informed concepts in the general frame of a generalized concept of safety goals and defence in depth. This methodology may provide a useful tool for the preparation of safety requirements for the design and operation of any kind of reactor including small and medium sized reactors with innovative safety features.(author)

  2. IAEA safety standards for research reactors

    International Nuclear Information System (INIS)

    Abou Yehia, H.

    2007-01-01

    The general structure of the IAEA Safety Standards and the process for their development and revision are briefly presented and discussed together with the progress achieved in the development of Safety Standards for research reactor. These documents provide the safety requirements and the key technical recommendations to achieve enhanced safety. They are intended for use by all organizations involved in safety of research reactors and developed in a way that allows them to be incorporated into national laws and regulations. The author reviews the safety standards for research reactors and details their specificities. There are 4 published safety standards: 1) Safety assessment of research reactors and preparation of the safety analysis report (35-G1), 2) Safety in the utilization and modification of research reactors (35-G2), 3) Commissioning of research reactors (NS-G-4.1), and 4) Maintenance, periodic testing and inspection of research reactors (NS-G-4.2). There 5 draft safety standards: 1) Operational limits and conditions and operating procedures for research reactors (DS261), 2) The operating organization and the recruitment, training and qualification of personnel for research reactors (DS325), 3) Radiation protection and radioactive waste management in the design and operation of research reactors (DS340), 4) Core management and fuel handling at research reactors (DS350), and 5) Grading the application of safety requirements for research reactors (DS351). There are 2 planned safety standards, one concerning the ageing management for research reactor and the second deals with the control and instrumentation of research reactors

  3. Safety standards of IAEA for management systems

    International Nuclear Information System (INIS)

    Vincze, P.

    2005-01-01

    IAEA has developed a new series of safety standards which are assigned for constitution of the conditions and which give the instruction for setting up the management systems that integrate the aims of safety, health, life environment and quality. The new standard shall replace IAEA 50-C-Q - Requirements for security of the quality for safety in nuclear power plants and other nuclear facilities as well as 14 related safety instructions mentioned in the Safety series No. 50-C/SG-Q (1996). When developing of this complex, integrated set of requirements for management systems, the IAEA requirements 50-C-Q (1996) were taken into consideration as well as the publications developed within the International organisation for standardization (ISO) ISO 9001:2000 and ISO14001: 1996. The experience of European Union member states during the development, implementation and improvement of the management systems were also taken into consideration

  4. The IAEA safety standards for radiation, waste and nuclear safety

    International Nuclear Information System (INIS)

    Gonzalez, Abel J.

    1997-01-01

    This paper presents a brief description of the standards for radiation, waste and nuclear safety established by the International Atomic Energy Agency (IAEA). It provides a historical overview of their development and also summarizes the standards' current preparation and review process. The final paragraphs offer an outlook on future developments. (author)

  5. The Agency's Safety Standards and Measures

    International Nuclear Information System (INIS)

    1976-04-01

    The Agency's Health and Safety Measures were first, approved by the Board of Governors on 31 March 1960 in implementation of Articles III.A.6 and XII of the Statute of the Agency. On the basis of the experience gained from applying those measures to projects carried out by Members under agreements concluded with the Agency, the Agency's Health and Safety Measures were revised in 1975 and approved by the Board of Governors on 25 February 1976. The Agency's Safety Standards and Measures as revised are reproduced in this document for the information of all Members

  6. NUSS safety standards: A critical assessment

    International Nuclear Information System (INIS)

    Minogue, R.B.

    1985-01-01

    The NUSS safety standards are based on systematic review of safety criteria of many countries in a process carefully defined to assure completeness of coverage. They represent an international consensus of accepted safety principles and practices for regulation and for the design, construction, and operation of nuclear power plants. They are a codification of principles and practices already in use by some Member States. Thus, they are not standards which describe methodologies at their present state of evolution as a result of more recent experience and improvements in technological understanding. The NUSS standards assume an underlying body of national standards and a defined technological base. Detailed design and industrial practices vary between countries and the implementation of basic safety standards within countries has taken approaches that conform with national industrial practices. Thus, application of the NUSS standards requires reconciliation with the standards of the country where the reactor will be built as well as with the country from which procurement takes place. Experience in making that reconciliation will undoubtedly suggest areas of needed improvement. After the TMI accident a reassessment of the NUSS programme was made and it was concluded that, given the information at that time and the then level of technology, the basic approach was sound; the NUSS programme should be continued to completion, and the standards should be brought into use. It was also recognized, however, that in areas such as probabilistic risk assessment, human factors methodology, and consideration of detailed accident sequences, more advanced technology was emerging. As these technologies develop, and become more amenable to practical application, it is anticipated that the NUSS standards will need revision. Ideally those future revisions will also flow from experience in their use

  7. Rugged target standards for HSI remote sensing

    Science.gov (United States)

    Morey, Mark; O'Neill, Mary; Hahn, Mark; DiBenedetto, John

    2015-05-01

    There is a need for stable test standards for many remote sensing applications that can be used both in the laboratory and in rugged test environments. Ideally these standards would be stable over time such that the same standard could be used from year to year for comparison of system performance. While ink-jet and spray gun methods can disperse controlled doses of dissolved analytes, methods to maintain particle size spectral variations are lacking. In addition, standards that are environmentally robust and stable over time are limited. As part of the recent Lighthouse work toward a Hyperspectral Imagery (HSI) proximal handheld sensor, Special Technologies Laboratory (STL) was tasked to do preliminary work toward a rugged, transportable, waterproof target board. This involved developing test standards using minerals of known particle sizes that have spectrally relevant features. Mineral powders were dispersed in binders that did not change their spectral characteristics. These standards were packaged such that they could be transported and used repeatedly. This paper discusses the methodology for developing this preliminary set of targets. Target sizes were limited to the proximal case, and further work is required to finalize the optimum binder and examine other possible appropriate minerals.

  8. Compliance with Private Food Safety Standards among ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    One of the private food safety standards that Kenyan horticultural farmers have to adopt to remain in export production is the GLOBALGAP (formerly EURPGAP). Many small-scale vegetable ... in the project area. Expected outputs include one PhD thesis, five master's theses, and various journal publications and policy briefs.

  9. 49 CFR 385.5 - Safety fitness standard.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. A motor carrier must meet the safety fitness standard set forth...

  10. Selecting safety standards for nuclear power plants

    International Nuclear Information System (INIS)

    1981-01-01

    Today, many thousands of documents are available describing the requirements, guidelines, and industrial standards which can be used as bases for a nuclear power plant programme. Many of these documents relate to nuclear safety which is currently the focus of world-wide attention. The multitude of documents available on the subject, and their varying status and emphasis, make the processes of selection and implementation very important. Because nuclear power plants are technically intricate and advanced, particularly in relation to the technological status of many developing countries, these processes are also complicated. These matters were the subject of a seminar held at the Agency's headquarters in Vienna last December. The IAEA Nuclear Safety Standards (NUSS) programme was outlined and explained at the Seminar. The five areas of the NUSS programme for nuclear power plants cover, governmental organization, siting, design; operation; quality assurance. In each area the Agency has issued Codes of Practice and is developing Safety Guides. These provide regulatory agencies with a framework for safety. The Seminar recognized that the NUSS programme should enable developing countries to identify priorities in their work, particularly the implementation of safety standards. The ISO activities in the nuclear field are carried out in the framework of its Technical Committee 85 (ISO/TC85). The work is distributed in sub-committees. Seminar on selection and implementation of safety standards for nuclear power plants, jointly organized by the IAEA and the International Organization for Standardization (ISO), and held in Vienna from 15 to 18 December 1980 concerned with: terminology, definitions, units and symbols (SC-1), radiation protection (SC-2), power reactor technology (SC-3), nuclear fuel technology (SC-5). There was general agreement that the ISO standards are complementary to the NUSS codes and guides. ISO has had close relations with the IAEA for several years

  11. 76 FR 29333 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

    Science.gov (United States)

    2011-05-20

    ... pipeline rehabilitation, replacement and repair initiatives along with all forum-related comments. PHMSA... Pipeline and Hazardous Materials Safety Administration Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY...

  12. Human rights standards for targeted sanctions

    NARCIS (Netherlands)

    Cortright, D.; de Wet, E.

    2010-01-01

    Legal scholar Erika de Wet and sanctions expert David Cortright team up to analyze the core principles of international human rights law in relation to the procedures for the imposition of targeted sanctions by the UN Security Council and the European Union. They define core legal standards such as

  13. Oswer integrated health and safety standard operating practices. Directive

    International Nuclear Information System (INIS)

    1993-02-01

    The directive implements the OSWER (Office of Solid Waste and Emergency Response) Integrated Health and Safety Standards Operating Practices in conjunction with the OSHA (Occupational Safety and Health Act) Worker Protection Standards, replacing the OSWER Integrated Health and Safety Policy

  14. Decoupling from international food safety standards

    DEFF Research Database (Denmark)

    Mercado, Geovana; Hjortsø, Carsten Nico; Honig, Benson

    2018-01-01

    in the market. These include: (1) partial adoption of formal rules; (2) selective adoption of convenient rules; and (3) ceremonial adoption to avoid compliance. Decoupling strategies allow local actors to largely disregard the formal food safety regulations while accommodating traditional cultural practices......Although inclusion in formal value chains extends the prospect of improving the livelihoods of rural small-scale producers, such a step is often contingent on compliance with internationally-promoted food safety standards. Limited research has addressed the challenges this represents for small...... rural producers who, grounded in culturally-embedded food safety conceptions, face difficulties in complying. We address this gap here through a multiple case study involving four public school feeding programs that source meals from local rural providers in the Bolivian Altiplan. Institutional logics...

  15. An Action Compiler Targeting Standard ML

    DEFF Research Database (Denmark)

    Iversen, Jørgen

    2005-01-01

    We present an action compiler that can be used in connection with an action semantics based compiler generator. Our action compiler produces code with faster execution times than code produced by other action compilers, and for some non-trivial test examples it is only a factor two slower than...... the code produced by the Gnu C Compiler. Targeting Standard ML makes the description of the code generation simple and easy to implement. The action compiler has been tested on a description of the Core of Standard ML and a subset of C....

  16. Spallation Neutron Source Accelerator Facility Target Safety and Non-safety Control Systems

    International Nuclear Information System (INIS)

    Battle, Ronald E.; DeVan, B.; Munro, John K. Jr.

    2006-01-01

    The Spallation Neutron Source (SNS) is a proton accelerator facility that generates neutrons for scientific researchers by spallation of neutrons from a mercury target. The SNS became operational on April 28, 2006, with first beam on target at approximately 200 W. The SNS accelerator, target, and conventional facilities controls are integrated by standardized hardware and software throughout the facility and were designed and fabricated to SNS conventions to ensure compatibility of systems with Experimental Physics Integrated Control System (EPICS). ControlLogix Programmable Logic Controllers (PLCs) interface to instruments and actuators, and EPICS performs the high-level integration of the PLCs such that all operator control can be accomplished from the Central Control room using EPICS graphical screens that pass process variables to and from the PLCs. Three active safety systems were designed to industry standards ISA S84.01 and IEEE 603 to meet the desired reliability for these safety systems. The safety systems protect facility workers and the environment from mercury vapor, mercury radiation, and proton beam radiation. The facility operators operated many of the systems prior to beam on target and developed the operating procedures. The safety and non-safety control systems were tested extensively prior to beam on target. This testing was crucial to identify wiring and software errors and failed components, the result of which was few problems during operation with beam on target. The SNS has continued beam on target since April to increase beam power, check out the scientific instruments, and continue testing the operation of facility subsystems

  17. Developments in safety standards and regulation

    International Nuclear Information System (INIS)

    Harbison, S.A.

    1994-01-01

    This paper explains, in broad terms, how regulatory control is exercised over licensed nuclear installations in the UK and how HSE has developed its safety standards to support its regulatory approach. It first sets out the scope of HSE's regulatory responsibilities, which NII exercises on its behalf, and briefly describes the licensing process and compliance monitoring through inspection over the life of a nuclear plant. It also refers to the role of assessment in NII's decision-making processes, and the part played in this by the consideration of costs and safety benefits. It then moves on to consider the challenges that HSE/NII are likely to face from the changing nuclear industry in the second half of the 1990s. (author)

  18. EPR meeting international safety standards with margin

    International Nuclear Information System (INIS)

    Mazurkiewicz, S.M.; Brauns, J.; Blombach, J.

    2005-01-01

    The EPR provides technology that offers a solution to the market's need for safe, economic power. The EPR was originally developed through a joint effort between Framatome ANP and Siemens by incorporating the best technological features from the French and German nuclear reactor fleets into a cost-competitive product capable of international licensing. As such, the EPR is a global product with commercial units currently being built in Finland at the Olkiluoto site, and planned for France, at the Flamanville site. Framatome ANP has recently proposed four EPR units to China in response to a request for vendor bids. In addition, Framatome ANP has announced their intent to pursue design certification with the United States Nuclear Regulatory Commission (NRC). This paper discusses how EPR's innovative safety philosophy ensures compliance with international safety standards for advanced light-water reactors (ALWRs). (author)

  19. EPR meeting international safety standards with margin

    International Nuclear Information System (INIS)

    Mazurkiewicz, S.M.; Brauns, J.; Blombach, J.

    2005-01-01

    The EPR provides technology that offers a solution to the market's need for safe, economic power. The EPR was originally developed through a joint effort between Framatome ANP and Siemens by incorporating the best technological features from the French and German nuclear reactor fleets into a cost-competitive product capable of international licensing. As such, the EPR is a global product with commercial units currently being built in Finland at the Olkiluoto site, and planned for France, at the Flamanville site. Framatome ANP has recently proposed four EPR units to China in response to a request for vendor bids. In addition, Framatome ANP has announced their intent to pursue design certification in with the United States Nuclear Regulatory Commission (NRC). This paper discusses how EPR's innovative safety philosophy ensures compliance with international safety standards for advanced light-water reactors (ALWRs). (author)

  20. Radiation safety standards : an environmentalist's approach

    International Nuclear Information System (INIS)

    Murthy, M.S.S.S.

    1977-01-01

    An integrated approach to the problem of environmental mutagenic hazards leads to the recommendation of a single dose-limit to the exposure of human beings to all man-made mutagenic agents including chemicals and radiation. However, because of lack of : (1) adequate information on chemical mutagens, (2) sufficient data on their risk estimates and (3) universally accepted dose-limites, control of chemical mutagens in the environment has not reached that advanced stage as that of radiation. In this situation, the radiation safety standards currently in use should be retained at their present levels. (M.G.B.)

  1. Assessment of Safety Standards for Automotive Electronic Control Systems

    Science.gov (United States)

    2016-06-01

    This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - ...

  2. 10 CFR 851.23 - Safety and health standards.

    Science.gov (United States)

    2010-01-01

    ..., “Occupational Safety and Health Standards for Agriculture.” (9) American Conference of Governmental Industrial... 10 Energy 4 2010-01-01 2010-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and...

  3. Implementation of the INEEL safety analyst training standard

    International Nuclear Information System (INIS)

    Hochhalter, E. E.

    2000-01-01

    The Idaho Nuclear Technology and Engineering Center (INTEC) safety analysis units at the Idaho National Engineering and Environmental Laboratory (INEEL) are in the process of implementing the recently issued INEEL Safety Analyst Training Standard (STD-1107). Safety analyst training and qualifications are integral to the development and maintenance of core safety analysis capabilities. The INEEL Safety Analyst Training Standard (STD-1107) was developed directly from EFCOG Training Subgroup draft safety analyst training plan template, but has been adapted to the needs and requirements of the INEEL safety analysis community. The implementation of this Safety Analyst Training Standard is part of the Integrated Safety Management System (ISMS) Phase II Implementation currently underway at the INEEL. The objective of this paper is to discuss (1) the INEEL Safety Analyst Training Standard, (2) the development of the safety analyst individual training plans, (3) the implementation issues encountered during this initial phase of implementation, (4) the solutions developed, and (5) the implementation activities remaining to be completed

  4. 75 FR 22317 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Science.gov (United States)

    2010-04-28

    ... 1300 [Docket No. NHTSA-2010-0054] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of..., multipurpose passenger vehicles, trucks, buses, trailers, incomplete vehicles, motorcycles, and motor vehicle...

  5. 77 FR 69586 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Science.gov (United States)

    2012-11-20

    ... [Docket No. NHTSA-2012-0155] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of..., multipurpose passenger vehicles, trucks, buses, trailers, motorcycles, and motor vehicle equipment. DATES: You...

  6. 76 FR 28131 - Federal Motor Vehicle Safety Standards; Motorcycle Helmets

    Science.gov (United States)

    2011-05-13

    ... Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards; Motorcycle Helmets; Final... 571 [Docket No. NHTSA-2011-0050] RIN 2127-AK15 Federal Motor Vehicle Safety Standards; Motorcycle... requirements for motorcycle helmets to reduce traumatic brain injury and other types of head injury. Some of...

  7. Radiological error: analysis, standard setting, targeted instruction and teamworking

    International Nuclear Information System (INIS)

    FitzGerald, Richard

    2005-01-01

    Diagnostic radiology does not have objective benchmarks for acceptable levels of missed diagnoses [1]. Until now, data collection of radiological discrepancies has been very time consuming. The culture within the specialty did not encourage it. However, public concern about patient safety is increasing. There have been recent innovations in compiling radiological interpretive discrepancy rates which may facilitate radiological standard setting. However standard setting alone will not optimise radiologists' performance or patient safety. We must use these new techniques in radiological discrepancy detection to stimulate greater knowledge sharing, targeted instruction and teamworking among radiologists. Not all radiological discrepancies are errors. Radiological discrepancy programmes must not be abused as an instrument for discrediting individual radiologists. Discrepancy rates must not be distorted as a weapon in turf battles. Radiological errors may be due to many causes and are often multifactorial. A systems approach to radiological error is required. Meaningful analysis of radiological discrepancies and errors is challenging. Valid standard setting will take time. Meanwhile, we need to develop top-up training, mentoring and rehabilitation programmes. (orig.)

  8. Applying radiation safety standards in radiotherapy

    International Nuclear Information System (INIS)

    The International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS) cover the application of ionizing radiation for all practices and interventions and are, therefore, basic and general in nature. Users of radiation sources have to apply these basic requirements to their own particular practices. This requires a degree of 'interpretation' by the user, which can result in varying levels of regulatory compliance and inconsistencies between applications of the BSS to similar practices. In this context, the preamble of the BSS states that: The [regulatory body] may need to provide guidance on how certain regulatory requirements are to be fulfilled for various practices, for example in regulatory guideline documents. In order to guide the user to achieve a good standard of protection and to achieve a consistent national approach to licensing and inspection, some countries have developed practice specific regulatory guidance, while others have practice specific regulations. For obvious reasons, national regulatory guidance is tailored to a country's own legislation and regulations. This can lead to problems if the guidance is used in other States without appropriate modification to take local requirements into account. There would therefore appear to be scope for producing internationally harmonized guidance, while bearing in mind that the ultimate responsibility for the regulatory documents rests with the State. Some regions have taken the initiative of preparing guidance to facilitate the regional harmonization of regulatory control of certain common practices (e.g. radiotherapy). A number of draft regulatory guidance documents for the main practices involving the use of ionizing radiation have already been prepared. This initiative indicates that there is a global demand for such documents. In particular, it is felt that countries participating in the IAEA's technical cooperation model project on Upgrading

  9. OSHA Laboratory Standard: Driving Force for Laboratory Safety!

    Science.gov (United States)

    Roy, Kenneth R.

    2000-01-01

    Discusses the Occupational Safety and Health Administration's (OSHA's) Laboratory Safety Standards as the major driving force in establishing and maintaining a safe working environment for teachers and students. (Author)

  10. 19 CFR 12.80 - Federal motor vehicle safety standards.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Federal motor vehicle safety standards. 12.80...; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Motor Vehicles and Motor Vehicle Equipment Manufactured on Or After January 1, 1968 § 12.80 Federal motor vehicle safety standards. (a) Standards...

  11. Setting the standard: The IAEA safety standards set the global reference

    International Nuclear Information System (INIS)

    Williams, L.

    2003-01-01

    For the IAEA, setting and promoting standards for nuclear radiation, waste, and transport safety have been priorities from the start, rooted in the Agency's 1957 Statute. Today, a corpus of international standards are in place that national regulators and industries in many countries are applying, and more are being encouraged and assisted to follow them. Considerable work is done to keep safety standards updated and authoritative. They cover five main areas: the safety of nuclear facilities; radiation protection and safety of radiation sources; safe management of radioactive waste; safe transport of radioactive material; and thematic safety areas, such as emergency preparedness or legal infrastructures. Overall, the safety standards reflect an international consensus on what constitutes a high level of safety for protecting people and the environment. All IAEA Member States can nominate experts for the Agency standards committees and provide comments on draft standards. Through this ongoing cycle of review and feedback, the standards are refined, updated, and extended where needed

  12. 77 FR 75045 - Locomotive Safety Standards

    Science.gov (United States)

    2012-12-19

    ...), the Central Railway MFG (CRM), D. P. Honold (Honold), David Lombardi (Lombardi), Paul, Reich & Myers... recognizes that the supplier is in the best position to aggregate reported product failures and safety... occurrence of a product failure. During operation, when a safety hazard exists, it is also the railroad that...

  13. Standardized safety management of AP1000 nuclear power plant

    International Nuclear Information System (INIS)

    Li Xingwen; Cao Zhiqiang; Cong Jiuyuan

    2011-01-01

    In 2002, China published and implemented the Law of the People's Republic of China on Work Safety and promulgated a series of guidelines and policies, which strengthened the safety management supervision. Standardization of safety, as another important step on safety supervision, comes after safety assesment and safety production licensing system, is also a permanent solution. Standardization of safety is a strategic, long term and fundamental work, which is also the basic access to achieving scientific safety management and increasing the inherent safety of an enterprise. Haiyang AP1000 nuclear power plant, adopting the modularized, 'open-top' and parallel construction means, overturned the traditional construction theory of installation work comes after the civil work and greatly shorten the construction period. At the same time, the notable increase of oversize module transportation and lifting and parallel construction raises higher demands for safety management. This article combines the characteristics and difficulties of safety management for Haiyang AP1000 nuclear power plant, puts forward ideas and methods for standardized safety management, and could also serve as reference to the safety management for other AP1000 projects. (authors)

  14. The main requirements of the International Basic Safety Standards

    International Nuclear Information System (INIS)

    Webb, G.A.M.

    1998-01-01

    The main requirements of the new international basic safety standards are discussed, including such topics as health effects of ionizing radiations, the revision of basic safety standards, the requirements for radiation protection practices, the requirements for intervention,and the field of regulatory infrastructures. (A.K.)

  15. 77 FR 48105 - Federal Motor Vehicle Safety Standards; Motorcycle Helmets

    Science.gov (United States)

    2012-08-13

    ... [Docket No. NHTSA-2012-0112] Federal Motor Vehicle Safety Standards; Motorcycle Helmets AGENCY: National... Vehicle Safety Standard for motorcycle helmets. Specifically, the final rule amended the helmet labeling... compliance test procedures of FMVSS No. 218, Motorcycle helmets, in order to make it more difficult to...

  16. 76 FR 34890 - Track Safety Standards; Concrete Crossties

    Science.gov (United States)

    2011-06-15

    ...-0007, Notice No. 3] RIN 2130-AC01 Track Safety Standards; Concrete Crossties AGENCY: Federal Railroad... effective concrete crossties, for rail fastening systems connected to concrete crossties, and for automated inspections of track constructed with concrete crossties. The Track Safety Standards were amended via final...

  17. 77 FR 54836 - Federal Motor Vehicle Safety Standards

    Science.gov (United States)

    2012-09-06

    ... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards CFR Correction 0 In Title 49 of the Code of Federal Regulations... read as follows: Sec. 571.119 Standard No. 119; New pneumatic tires for motor vehicles with a GVWR of...

  18. Emerging standards with application to accelerator safety systems

    International Nuclear Information System (INIS)

    Mahoney, K.L.; Robertson, H.P.

    1997-01-01

    This paper addresses international standards which can be applied to the requirements for accelerator personnel safety systems. Particular emphasis is given to standards which specify requirements for safety interlock systems which employ programmable electronic subsystems. The work draws on methodologies currently under development for the medical, process control, and nuclear industries

  19. 75 FR 41281 - Bridge Safety Standards

    Science.gov (United States)

    2010-07-15

    ... bridges. The structural integrity of bridges that carry railroad tracks is important to the safety of... the structural failure of a railroad bridge. Train accidents caused by the structural failure of... inspection and analysis of the bridge. In general, timber bridges continue to function safely, and masonry...

  20. Health and safety standards under deregulation threat

    NARCIS (Netherlands)

    Cremers, Jan

    2015-01-01

    In the quarterly CLR-News (2-2015), titled ‘The future of the EU health and safety legislation’ (www.clr-news.org under Publications), editor Jan Cremers (Law School UvT and AIAS) questions whether the OHS-policy developed is internal market proof and resistant enough to the reigning dogma of

  1. 76 FR 23714 - Railroad Safety Appliance Standards

    Science.gov (United States)

    2011-04-28

    ... ergonomic design principles that would increase the safety of persons who work on and around rail equipment... Transport Canada participate as a non-voting members), as well as ergonomics experts. The Task Force was... participate in the Task Force as a non-voting member, provided that an ergonomics expert, labor...

  2. International safety standards in a technological age

    International Nuclear Information System (INIS)

    Lawrence, D.J.

    1980-01-01

    Plant design, particularly plant involving pipework, is becoming more complex both in engineering sophistication and in scale of project. Simultaneously, the requirement from both environmental and legislative lobbies is in need of greater attention with regard to all aspects of safety. At the heart of both problems is the need for improved communication for speed, relevancy and accuracy. By the use of computer data banks and software specifically designed for the problem, it is shown how modern communications may be used. (author)

  3. European and International Standards on health and safety in welding

    Science.gov (United States)

    Howe, A.

    2009-02-01

    A number of European and International Standards on health and safety in welding have been published in recent years and work on several more is nearing completion. These standards have been prepared jointly by the International Standards Organization (ISO) and the European Committee for Standardization (CEN). The standards development work has mostly been led by CEN/TC 121/SC 9, with excellent technical input from experts within Europe; but work on the revision of published standards, which has recently gathered pace, is now being carried out by ISO/TC 44/SC 9, with greater international involvement. This paper gives an overview of the various standards that have been published, are being revised or are under development in this field of health and safety in welding, seeking to (i) increase international awareness of published standards, (ii) encourage wider participation in health and safety in welding standards work and (iii) obtain feedback and solicit comments on standards that are currently under development or revision. Such an initiative is particularly timely because work is currently in progress on the revision of one of the more important standards in this field, namely EN ISO 10882:2001 Health and safety in welding and allied processes— Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles.

  4. Preliminary safety information document for the standard MHTGR: Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    None

    1986-01-01

    This report presents preliminary safety information for the standard MHTGR. Topics discussed include: plant protection, instrumentation, and control; electrical systems; service systems; and steam and energy conversion systems. (JDB)

  5. 75 FR 76692 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Science.gov (United States)

    2010-12-09

    ..., 510, 511, 512, 520, 523, 525, 526, and 571 [Docket No. NHTSA-2010-0159] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety... that specifically relate to passenger cars, multipurpose passenger vehicles, trucks, buses, trailers...

  6. 78 FR 76265 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Science.gov (United States)

    2013-12-17

    ... Through 578, Except Parts 571 and 575 [Docket No. NHTSA-2013-0116] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration... passenger cars, multipurpose passenger vehicles, trucks, buses, trailers, motorcycles, and motor vehicle...

  7. 29 CFR 505.6 - Safety and health standards.

    Science.gov (United States)

    2010-07-01

    ... section will be performed or engaged in under working conditions which are unsanitary or hazardous or...) or 6(d) of the Williams-Steiger Occupational Safety and Health Act of 1970 (29 U.S.C. 655). The...-Steiger Occupational Safety and Health Act of 1970, and any variance from a standard applied under...

  8. Safety effects of road design standards in Europe.

    NARCIS (Netherlands)

    Wegman, F.C.M. & Slop, M.

    2003-01-01

    This paper deals with the result of a study carried out for the European Commission by the SWOV Institute for Road Safety Research, in cooperation with a number of other European institutes, and which was reported in 1994. The title of the study is "Safety Effects of Road Design Standards." The aims

  9. 49 CFR 659.15 - System safety program standard.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false System safety program standard. 659.15 Section 659.15 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the...

  10. 41 CFR 128-1.8005 - Seismic safety standards.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Seismic safety standards. 128-1.8005 Section 128-1.8005 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program § 128-1.8005...

  11. The IAEA safety standards on emergency response

    International Nuclear Information System (INIS)

    Webb, G.A.M.; McKenna, T.

    1997-01-01

    During the past decade considerable progress has been made in developing internationally recognized principles for decisions on protective measures following accidents involving radioactive materials. Efforts have involved the IAEA, the International Commission on Radiological Protection (ICRP), World Health Organization (WHO), Food and Agriculture Organization (FAO), Commission of the European Communities (CEC), and Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD/NEA). Prior to the Chernobyl accident, the Agency had published Safety Series No. 72, which set out guidance on the principles for establishing intervention levels for the protection of the public in the event of a nuclear accident or radiological emergency. That guidance was aimed at assisting national and regional authorities having responsibility for emergency response planning. A range of values were given within which it was expected that intervention levels would be specified. It recognized a need for practical quantities that could be readily compared with the results of measurements made in environmental materials and in food stuffs, so-called Derived Intervention Levels (DILs). Shortly after the accident at the Chernobyl nuclear power plant in 1986, the Agency published Safety Series No. 81, which addressed the principles, procedures, and data needed to establish these DILs

  12. Safety targets and public risk perceptions in the nuclear field - technical treadmill or institutional responses?

    International Nuclear Information System (INIS)

    Wynne, B.

    1989-01-01

    The context of our treatment of risk perceptions and safety targets is the apparently wide gap between expert judgements of 'objective risks' and public perceptions of those risks. In the nuclear field the latter appear to so multiply the objective risks as seen by the experts, as to make safety targets vastly too strict (whether for routine discharges or for large accidents), thus design extravagantly expensive on any 'rational' criteria. In recent years the nuclear industry has come to terms more with the public perceptions problem, and has accepted that it is legitimate to exercise different, more severe and costly safety standards in the nuclear field if that is what society wants, as it appears to do. Whilst retaining the conviction that this is scientifically unwarranted, the industry has therefore reconciled itself somewhat to more stringent technical safety targets. (author)

  13. Antibody reactions methods in safety standards

    International Nuclear Information System (INIS)

    Shubik, V.M.; Sirasdinov, V.G.; Zasedatelev, A.A.; Kal'nitskij, S.A.; Livshits, R.E.

    1978-01-01

    Results of determinations are presented of autoantibodies in white rats to which the radionuclides 137 Cs, 226 Ra, and 90 Sr that show different distribution patterns in the body, have been administered chronically. Autoantiboby production is found to increase when the absorbed doses are close to or exceeding seven- to tenfold the maximum permissible values. The results obtained point to the desirability of autoantibody determination in studies aimed at setting hygienic standards for the absorption of radioactive substances

  14. A new standard for multidisciplinary health and safety technicians

    International Nuclear Information System (INIS)

    Trinoskey, P.A.; Fry, L.A.; Egbert, W.F.

    2000-01-01

    Over the last two decades, a significant trend in health and safety has been toward greater specialization. However, compartmentalization of health and safety disciplines often leads to an inequity in resources, especially when appropriations overemphasize one risk to the detriment of others. For example, overemphasis on radiological safety can create an imbalance in overall worker protection. A multidisciplinary technical can help restore the balance and provide for a healthier and safer work environment. The key advantages of a multidisciplinary health and safety technician include: Broad coverage of the work area by one technician, More diverse use of the technician pool, Better coverage for off-shift or nonstandard hours, Balance of risks because all hazards are considered, Integrated emergency response, Ownership, Less time of identify the correct person with the requisite skills. We have developed a new standard that establishes the training and related qualifications for a multidisciplinary health and safety technician. The areas of training and qualification that are addressed include elements of industrial hygiene, industrial safety, fire protection, electrical safety, construction safety, and radiation safety. The initial core training program ensures that individuals are trained to the performance of requirements of the job. Initial training is in five areas: Fundamentals, Hazard recognition, Hazard assessment, Hazards controls, Hazards minimization. Core training is followed by formal qualification on specific tasks, including ventilation surveys, air monitoring, noise assessments, radiological monitoring, area inspections, work-area setups, and work coverage. The new standard addresses not only training topics and requirements, but also guidance to ensure that performance objectives are met. The standard applies to technicians, supervisors, technologists, and six specialty areas, including academic institutions and decontamination and decommissioning

  15. KHNP Safety Culture Framework based on Global Standard, and Lessons learned from Safety Culture Evaluation

    International Nuclear Information System (INIS)

    Kim, Younggab; Hur, Nam Young; Jeong, Hyeon Jong

    2015-01-01

    In order to eliminate the vague fears of the people about the nuclear power and operate continuously NPPs, a strong safety culture of NPPs should be demonstrated. Strong safety culture awareness of workers can overcome social distrust about NPPs. KHNP has been a variety efforts to improve and establish safety culture of NPPs. Safety culture framework applying global standards was set up and safety culture assessment has been carried out periodically to enhance safety culture of workers. In addition, KHNP developed various safety culture contents and they are being used in NPPs by workers. As a result of these efforts, safety culture awareness of workers is changed positively and the safety environment of NPPs is expected to be improved. KHNP makes an effort to solve areas for improvement derived from safety culture assessment. However, there are some areas to take a long time in completing the work. Therefore, these actions are necessary to be carried out consistently and continuously. KHNP also developed recently safety culture enhancement system based on web. All information related to safety culture in KHNP will be shared through this web system and this system will be used to safety culture assessment. In addition to, KHNP plans to develop safety culture indicators for monitoring the symptoms of safety culture weakening

  16. European standardization activities on safety of liquid helium cryostats

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    This talk gives a general overview on the challenges of designing safety units for liquid helium cryostats with regard to existing industry standards. It reviews the work of a national working group that published the technical guideline DIN SPEC 4683 in April 2015, which is dedicated to the particular conditions in liquid helium cryostats. Based on both this guideline and equivalent documents from e.g. CEA, CERN, a working group is being formed at the European Committee for Standardization, associated to CEN/TC 268, which will work on a European standard on safety of liquid helium cryostats. The actual status and the schedule of this project are presented.

  17. International basic safety standards for protecting against ionizing radiation and for the safety of radiation sources

    International Nuclear Information System (INIS)

    1996-01-01

    The purpose of the Standards is to establish basic requirements for protection against the risks associated with exposure to ionizing radiation (hereinafter termed radiation) and for the safety of radiation sources that may deliver such exposure. The Standards have been developed from widely accepted radiation protection and safety principles, such as those published in the Annals of the ICRP and the IAEA Safety Series. They are intended to ensure the safety of all types of radiation sources and, in doing so, to complement standards already developed for large and complex radiation sources, such as nuclear reactors and radioactive waste management facilities. For the sources, more specific standards, such as those issued by the IAEA, are typically needed to achieve acceptable levels of safety. As these more specific standards are generally consistent with the Standards, in complying with them, such more complex installations will also generally comply with the Standards. The Standards are limited to specifying basic requirements of radiation protection and safety, with some guidance on how to apply them. General guidance on applying some of the requirements is available in the publications of the Sponsoring Organizations and additional guidance will be developed as needed in the light of experience gained in the application of the Standards. Tabs

  18. Nuclear criticality safety program development using necessary and sufficient standards

    Energy Technology Data Exchange (ETDEWEB)

    Croucher, D.W.; Stachowiak, R.V. [Kaiser-Hill Co., LLC, Golden, CO (United States); Wilson, R.E. [Safe Sites of Colorado, Golden, CO (United States)

    1996-12-31

    The U.S. Department of Energy`s (DOE`s) Necessary and Sufficient Standards Closure Process has been used to develop a new criticality, safety program manual for the Rocky Flats Environmental Technology Site (RFETS). Standards define and communicate the expectations for performance of work. The purpose of the necessary and sufficient standards closure process is to apply standards determined to be necessary and sufficient for protecting the workers, the public, and the environment. This ensures that the applied standards add value to the performance of the activity; work effectiveness is increased. The purpose of this paper is to briefly describe the process and the results for the selection of national criticality safety standards for use at the Rocky Flats facilities.

  19. Process safety improvement-Quality and target zero

    International Nuclear Information System (INIS)

    Van Scyoc, Karl

    2008-01-01

    Process safety practitioners have adopted quality management principles in design of process safety management systems with positive effect, yet achieving safety objectives sometimes remain a distant target. Companies regularly apply tools and methods which have roots in quality and productivity improvement. The 'plan, do, check, act' improvement loop, statistical analysis of incidents (non-conformities), and performance trending popularized by Dr. Deming are now commonly used in the context of process safety. Significant advancements in HSE performance are reported after applying methods viewed as fundamental for quality management. In pursuit of continual process safety improvement, the paper examines various quality improvement methods, and explores how methods intended for product quality can be additionally applied to continual improvement of process safety. Methods such as Kaizen, Poke yoke, and TRIZ, while long established for quality improvement, are quite unfamiliar in the process safety arena. These methods are discussed for application in improving both process safety leadership and field work team performance. Practical ways to advance process safety, based on the methods, are given

  20. Process safety improvement-Quality and target zero

    Energy Technology Data Exchange (ETDEWEB)

    Van Scyoc, Karl [Det Norske Veritas (U.S.A.) Inc., DNV Energy Solutions, 16340 Park Ten Place, Suite 100, Houston, TX 77084 (United States)], E-mail: karl.van.scyoc@dnv.com

    2008-11-15

    Process safety practitioners have adopted quality management principles in design of process safety management systems with positive effect, yet achieving safety objectives sometimes remain a distant target. Companies regularly apply tools and methods which have roots in quality and productivity improvement. The 'plan, do, check, act' improvement loop, statistical analysis of incidents (non-conformities), and performance trending popularized by Dr. Deming are now commonly used in the context of process safety. Significant advancements in HSE performance are reported after applying methods viewed as fundamental for quality management. In pursuit of continual process safety improvement, the paper examines various quality improvement methods, and explores how methods intended for product quality can be additionally applied to continual improvement of process safety. Methods such as Kaizen, Poke yoke, and TRIZ, while long established for quality improvement, are quite unfamiliar in the process safety arena. These methods are discussed for application in improving both process safety leadership and field work team performance. Practical ways to advance process safety, based on the methods, are given.

  1. Process safety improvement--quality and target zero.

    Science.gov (United States)

    Van Scyoc, Karl

    2008-11-15

    Process safety practitioners have adopted quality management principles in design of process safety management systems with positive effect, yet achieving safety objectives sometimes remain a distant target. Companies regularly apply tools and methods which have roots in quality and productivity improvement. The "plan, do, check, act" improvement loop, statistical analysis of incidents (non-conformities), and performance trending popularized by Dr. Deming are now commonly used in the context of process safety. Significant advancements in HSE performance are reported after applying methods viewed as fundamental for quality management. In pursuit of continual process safety improvement, the paper examines various quality improvement methods, and explores how methods intended for product quality can be additionally applied to continual improvement of process safety. Methods such as Kaizen, Poke yoke, and TRIZ, while long established for quality improvement, are quite unfamiliar in the process safety arena. These methods are discussed for application in improving both process safety leadership and field work team performance. Practical ways to advance process safety, based on the methods, are given.

  2. Radiation protection and safety of radiation sources international basic safety standards

    CERN Document Server

    International Atomic Energy Agency. Vienna

    2014-01-01

    The Board of Governors of the IAEA first approved Basic Safety Standards in June 1962; they were published by the IAEA as IAEA Safety Series No. 9. A revised edition was issued in 1967. A third revision was published by the IAEA as the 1982 Edition of IAEA Safety Series No. 9 ; this edition was jointly sponsored by the IAEA, ILO, OECD/NEA and the WHO. The next edition was International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources, published by the IAEA as IAEA Safety Series No. 115 in February 1996, and jointly sponsored by the FAO, IAEA, ILO, OECD/NEA, PAHO and the WHO.

  3. Technical standards in the law of technical safety

    International Nuclear Information System (INIS)

    Marburger, P.

    1985-01-01

    Technical standards are of great importance for the closer definition of inexact terms of law, for instance ''generally accepted technical rules'', ''state of the art'', ''state of science and technology'' or similar normative terms, in the law of technical safety. The paper discusses with whom the authority for regulating this sector of law rests, deals with the different ways of how technical standards are used by the law (''anticipated expert opinion'', reference to such standards in law and administration) and points out demands on the procedure of standardization. (orig.) [de

  4. International standardization of safety requirements for fast reactors

    International Nuclear Information System (INIS)

    2011-06-01

    Japan Atomic Energy Agency (JAEA) is conducting the FaCT (Fast Reactor Cycle Technology Development) project in cooperation with Japan Atomic Power Company (JAPC) and Mitsubishi FBR systems inc. (MFBR), where an advanced loop-type fast reactor named JSFR (Japan Sodium-cooled Fast Reactor) is being developed. It is important to develop software technologies (a safety guideline, safety design criteria, safety design standards etc.) of FBRs as well as hardware ones (a reactor plant itself) in order to address prospective worldwide utilization of FBR technology. Therefore, it is expected to establish a rational safety guideline applicable to the JSFR and harmonized with national nuclear-safety regulations as well, including Japan, the United States and the European Union. This report presents domestic and international status of safety guideline development for sodium-cooled fast reactors (SFRs), results of comparative study for safety requirements provided in existing documents and a proposal for safety requirements of future SFRs with a roadmap for their refinement and worldwide utilization. (author)

  5. A new standard for core training in radiation safety

    International Nuclear Information System (INIS)

    Trinoskey, P.A.

    1997-02-01

    A new American National Standard for radiation worker training was recently developed. The standard emphasizes performance-based training and establishing a training program rather than simply prescribing objectives. The standard also addresses basic criteria, including instructor qualifications. The standard is based on input from a wide array of regulatory agencies, universities, national laboratories, and nuclear power entities. This paper presents an overview of the new standard and the philosophy behind it. The target audience includes radiation workers, management and supervisory personnel, contractors, students, emergency personnel, and visitors

  6. DOE standard: Integration of environment, safety, and health into facility disposition activities. Volume 1: Technical standard

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    This Department of Energy (DOE) technical standard (referred to as the Standard) provides guidance for integrating and enhancing worker, public, and environmental protection during facility disposition activities. It provides environment, safety, and health (ES and H) guidance to supplement the project management requirements and associated guidelines contained within DOE O 430.1A, Life-Cycle Asset Management (LCAM), and amplified within the corresponding implementation guides. In addition, the Standard is designed to support an Integrated Safety Management System (ISMS), consistent with the guiding principles and core functions contained in DOE P 450.4, Safety Management System Policy, and discussed in DOE G 450.4-1, Integrated Safety Management System Guide. The ISMS guiding principles represent the fundamental policies that guide the safe accomplishment of work and include: (1) line management responsibility for safety; (2) clear roles and responsibilities; (3) competence commensurate with responsibilities; (4) balanced priorities; (5) identification of safety standards and requirements; (6) hazard controls tailored to work being performed; and (7) operations authorization. This Standard specifically addresses the implementation of the above ISMS principles four through seven, as applied to facility disposition activities.

  7. 78 FR 29279 - Safety Standard for Carriages and Strollers

    Science.gov (United States)

    2013-05-20

    ... incorporate automatic or assisted folding and unfolding mechanisms. B. Market Description The majority of... object. Lock mechanism issues resulting in unexpected collapse of the stroller accounted for 121... points and locks/latches. The standard that covers stroller safety in Australia and New Zealand...

  8. 42 CFR 486.108 - Condition for coverage: Safety standards.

    Science.gov (United States)

    2010-10-01

    ... indication of the production of X-rays whenever the X-ray tube is energized. The control panel includes... BY SUPPLIERS Conditions for Coverage: Portable X-Ray Services § 486.108 Condition for coverage: Safety standards. X-ray examinations are conducted through the use of equipment which is free of...

  9. Standard model for safety analysis report of fuel reprocessing plants

    International Nuclear Information System (INIS)

    1979-12-01

    A standard model for a safety analysis report of fuel reprocessing plants is established. This model shows the presentation format, the origin, and the details of the minimal information required by CNEN (Comissao Nacional de Energia Nuclear) aiming to evaluate the requests of construction permits and operation licenses made according to the legislation in force. (E.G.) [pt

  10. Standard model for safety analysis report of fuel fabrication plants

    International Nuclear Information System (INIS)

    1980-09-01

    A standard model for a safety analysis report of fuel fabrication plants is established. This model shows the presentation format, the origin, and the details of the minimal information required by CNEN (Comissao Nacional de Energia Nuclear) aiming to evaluate the requests of construction permits and operation licenses made according to the legislation in force. (E.G.) [pt

  11. Regulatory practices and safety standards for nuclear power plants

    International Nuclear Information System (INIS)

    1989-01-01

    The International Symposium on Regulatory Practices and Safety Standards for Nuclear Power Plants was jointly organized by the International Atomic Energy Agency (IAEA), for Nuclear Energy Agency of the OECD and the Government of the Federal Republic of Germany with the objective of providing an international forum for the exchange of information on regulatory practices and safety standards for nuclear power plants. The Symposium was held in Munich, Federal Republic of Germany, from 7 to 10 November 1988. It was attended by 201 experts from some 32 Member States and 4 international organizations. Fifty-one papers from 19 Member States and 2 international organizations were presented and discussed in 5 technical sessions covering the following subjects: National Regulatory Practices and Safety Standards (14 papers); Implementation of Regulatory Practices - Technical Issues (8 papers); Implementation of Regulatory Practices - Operational Aspects (8 papers); Developments and Trends in Safety Standards and Practices (11 papers); International Aspects (10 papers). A separate abstract was prepared for each of these papers. Refs, figs and tabs

  12. OSHA Standard Time: Worker Safety Rules for Schools.

    Science.gov (United States)

    Smith, Sharon E.; Roy, Kenneth R.

    1994-01-01

    Briefly describes six of the Occupational Safety and Health Administration (OSHA) standards applicable to school districts. Provides a suggested approach for compliance and discusses how one district has begun to meet the challenge. The mandated OSHA programs concern the following: (1) hazard communication; (2) chemical hygiene; (3) bloodborne…

  13. Working group 1A - basis for the standard-safety

    International Nuclear Information System (INIS)

    Whipple, C.

    1993-01-01

    This paper presents a summary of the progress made by working group 1A (Basis for the Safety Standard) during the Electric Power Research Institute's EPRI Workshop on the technical basis of EPA HLW Disposal Criteria, March 1993. This group discussed the semantics of terms within the standard 40 CFR Part 191, the implementation of this standard, the advanced notice of rulemaking, the issue of emitting carbon-14 through a gaseous pathway, the strategy of dealing with standards for contamination of drinking water and groundwater, the 100,000 year time frame, and the analysis of specific comments. The specific comments dealt with the cost effectiveness of the standard, the dose histogram for populations and individuals, groundwater definition and the underlying technology driver for this standard

  14. 49 CFR 571.131 - Standard No. 131; School bus pedestrian safety devices.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Standard No. 131; School bus pedestrian safety... STANDARDS Federal Motor Vehicle Safety Standards § 571.131 Standard No. 131; School bus pedestrian safety... buses to improve the safety of pedestrians in the vicinity of stopped school buses. S2. Purpose. The...

  15. Nuclear safety targets and problems of social acceptability

    International Nuclear Information System (INIS)

    Macgill, S.M.

    1989-01-01

    The following are among the factors which make the problem of setting acceptable safety targets for societal protection from possible nuclear accidents one of such formidable proportion: The varied and often conflicting positions among and between the many constituencies with a claim to interest in the problem: local, national and international populations; lay, workplace and professional communities; private and public interests; active environmental lobbies and intentionally passive publics; powerful influences and politically unprivileged classes; press and mass media. To seek 'acceptability' of safety targets through common consensus is problematised by the difficulty in overcoming the immense social and historical forces that give rise to the prevailing contrariety among different people's positions. To seek resolution of differences by some appropriate weighting of the different views of different constituencies is problematised by the lack of unique identification of what the constituencies are, by the difficulty in faithfully representing their views, and by the absence of 'laws of social entitlement' vis-a-vis the weight that should be given to each. In sum, the problem of setting socially acceptable safety targets is itself bound up with inherently open ended questions of democracy and representation. (author)

  16. Approaching standard by designing a basic safety function

    OpenAIRE

    Baudoin , James; Bello , Jean-Paul

    2014-01-01

    This document is intended to guide designers to perform machinery control systems with only one or a few "basic safety functions such as emergency stop or movable guard.Among the available standards for machinery design, EN ISO 13849-1 is the one providing recommendations to design safety related parts of control systems (SRP/CS) implementing different types of energy such as electric, hydraulic or pneumatic.This document is based on the implementation of the simplified method of EN ISO 13849...

  17. [Expert investigation on food safety standard system framework construction in China].

    Science.gov (United States)

    He, Xiang; Yan, Weixing; Fan, Yongxiang; Zeng, Biao; Peng, Zhen; Sun, Zhenqiu

    2013-09-01

    Through investigating food safety standard framework among food safety experts, to summarize the basic elements and principles of food safety standard system, and provide policy advices for food safety standards framework. A survey was carried out among 415 experts from government, professional institutions and the food industry/enterprises using the National Food Safety Standard System Construction Consultation Questionnaire designed in the name of the Secretariat of National Food Safety Standard Committee. Experts have different advices in each group about the principles of food product standards, food additive product standards, food related product standards, hygienic practice, test methods. According to the results, the best solution not only may reflect experts awareness of the work of food safety standards situation, but also provide advices for setting and revision of food safety standards for the next. Through experts investigation, the framework and guiding principles of food safety standard had been built.

  18. Basic safety standards for radiation protection. 1982 ed

    International Nuclear Information System (INIS)

    1982-01-01

    The International Atomic Energy Agency, the World Health Organization, the International Labour Organisation and the Nuclear Energy Agency of the OECD have undertaken to provide jointly a world-wide basis for harmonized and up-to-date radiation protection standards. The new Basic Safety Standards for Radiation Protection are based upon the latest recommendations by the International Commission on Radiological Protection (ICRP) which are essentially contained in its Publication No.26. These new Basic Safety Standards have been elaborated by an Advisory Group of Experts which met in Vienna from 10-14 October 1977, from 23-27 October 1978 and from 1-12 December 1980 under the joint auspices of the IAEA, ILO, WHO and the Nuclear Energy Agency of the OECD. Comments on the draft Basic Safety Standards received from Member States and relevant organizations were taken into account by the Advisory Group in the process of preparation of the revised Basic Safety Standards for Radiation Protection, which are published by the IAEA on behalf of the four sponsoring organizations. One of the main features of this revision is an increased emphasis on the recommendation to keep all exposures to ionizing radiation as low as reasonably achievable, economic and social factors being taken into account; consequently, radiation protection should not only apply the basic dose limits but also comply with this recommendation. Detailed guidance is given to assist those who have to decide on the implementation of this recommendation in particular cases. Another important feature is the recommendation of a more coherent method for achieving consistency in limiting risks to health, irrespective of whether the risk is of uniform or non-uniform exposure of the body.

  19. Safety management systems and their role in achieving high standards of operational safety

    International Nuclear Information System (INIS)

    Coulston, D.J.; Baylis, C.C.

    2000-01-01

    Achieving high standards of operational safety requires a robust management framework that is visible to all personnel with responsibility for its implementation. The structure of the management framework must ensure that all processes used to manage safety interlink in a logical and coherent manner, that is, they form a management system that leads to continuous improvement in safety performance. This Paper describes BNFL's safety management system (SMS). The SMS has management processes grouped within 5 main elements: 1. Policy, 2. Organisation, 3. Planning and Implementation, 4. Measuring and Reviewing Performance, 5. Audit. These elements reflect the overall process of setting safety objective (from Policy), measuring success and reviewing the performance. Effective implementation of the SMS requires senior managers to demonstrate leadership through their commitment and accountability. However, the SMS as a whole reflects that every employee at every level within BNFL is responsible for safety of operations under their control. The SMS therefore promotes a proactive safety culture and safe operations. The system is formally documented in the Company's Environmental, Health and Safety (EHS) Manual. Within in BNFL Group, the Company structures enables the Manual to provide overall SMS guidance and co-ordination to its range of nuclear businesses. Each business develops the SMS to be appropriate at all levels of its organisation, but ensuring that each level is consistent with the higher level. The Paper concludes with a summary of BNFL's safety performance. (author)

  20. Solar Passive Modification Increase Radiation Safety Standards Inside Accelerator Building

    International Nuclear Information System (INIS)

    Eid, A. F.; Keshk, A. B.

    2010-01-01

    Irradiation processing by accelerated electrons is considering one of the most important and useful industrial irradiation treatments. It is depending on two principle attachment elements which are architecture of irradiation building and the accelerator characteristic that was arranged inside irradiation building. Negative environmental measurements were recorded inside the main building and were exceeded the international standards (humidity, air speed, high thermal effects and ozone concentration). The study showed that it is essential to improve the natural environmental standards inside the main irradiation building in order to improve the work environment and to reduce ozone concentration from 220 ppb to international standard. The main goals and advantages were achieved by using environmental architecture (desert architecture) indoor the irradiation building. The work depends on passive solar system which is economic, same architectural elements, comfort / health, and radiation safety, and without mechanical means. The experimental work was accomplished under these modifications. The registered results of various environmental concentrations have proved their normal standards.

  1. Food safety regulations in Australia and New Zealand Food Standards.

    Science.gov (United States)

    Ghosh, Dilip

    2014-08-01

    Citizens of Australia and New Zealand recognise that food security is a major global issue. Food security also affects Australia and New Zealand's status as premier food exporting nations and the health and wellbeing of the Australasian population. Australia is uniquely positioned to help build a resilient food value chain and support programs aimed at addressing existing and emerging food security challenges. The Australian food governance system is fragmented and less transparent, being largely in the hands of government and semi-governmental regulatory authorities. The high level of consumer trust in Australian food governance suggests that this may be habitual and taken for granted, arising from a lack of negative experiences of food safety. In New Zealand the Ministry of Primary Industries regulates food safety issues. To improve trade and food safety, New Zealand and Australia work together through Food Standards Australia New Zealand (FSANZ) and other co-operative agreements. Although the potential risks to the food supply are dynamic and constantly changing, the demand, requirement and supply for providing safe food remains firm. The Australasian food industry will need to continually develop its system that supports the food safety program with the help of scientific investigations that underpin the assurance of what is and is not safe. The incorporation of a comprehensive and validated food safety program is one of the total quality management systems that will ensure that all areas of potential problems are being addressed by industry. © 2014 Society of Chemical Industry.

  2. 75 FR 37343 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

    Science.gov (United States)

    2010-06-29

    ... [Docket No. NHTSA-2010-0061] Federal Motor Vehicle Safety Standards; Occupant Crash Protection AGENCY... Citizen and Advocates for Highway and Auto Safety, to amend the Federal motor vehicle safety standard on... systems that are regulated by Federal Motor Vehicle Safety Standard (FMVSS) No. 208, ``Occupant crash...

  3. Safety, codes and standards for hydrogen installations. Metrics development and benchmarking

    Energy Technology Data Exchange (ETDEWEB)

    Harris, Aaron P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dedrick, Daniel E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); LaFleur, Angela Christine [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); San Marchi, Christopher W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-04-01

    Automakers and fuel providers have made public commitments to commercialize light duty fuel cell electric vehicles and fueling infrastructure in select US regions beginning in 2014. The development, implementation, and advancement of meaningful codes and standards is critical to enable the effective deployment of clean and efficient fuel cell and hydrogen solutions in the energy technology marketplace. Metrics pertaining to the development and implementation of safety knowledge, codes, and standards are important to communicate progress and inform future R&D investments. This document describes the development and benchmarking of metrics specific to the development of hydrogen specific codes relevant for hydrogen refueling stations. These metrics will be most useful as the hydrogen fuel market transitions from pre-commercial to early-commercial phases. The target regions in California will serve as benchmarking case studies to quantify the success of past investments in research and development supporting safety codes and standards R&D.

  4. Basic Safety Standards for Radiation Protection - 1967 Edition

    International Nuclear Information System (INIS)

    1967-01-01

    This first revision of the Basic Safety Standards was approved by the IAEA Board of Governors in September 1965. It was prepared with the assistance of a panel of experts chaired by Prof. L. Bugnard, Director of the French Institut National d'Hygiene, and attended by representatives of several international organizations. Comments from Member States were considered and changes were introduced on the basis of recommendations made by the International Commission on Radiological Protection in 1966. The Director General of the IAEA has been authorized by the Board to apply the revised Standards to IAEA and IAEA-assisted operations. It has also been recommended that the national regulations of Member States should conform, as far as is practicable, to the revised Standards. (author)

  5. Public Safety Standards for the Launch and Entry of Spacecraft

    Science.gov (United States)

    Wilde, Paul; Van Suetendael, Richard; Hallock, James; Larson, Erik

    2005-12-01

    This paper describes elements of the US government's response to the Space Shuttle Columbia accident and other actions recently taken, relevant to public safety during launch and entry of spacecraft. The Columbia accident generated numerous debris impacts capable of causing public harm, including major property damage as well as serious injury to members of the public on the ground, in aircraft, and on waterborne vessels. The Columbia Accident Investigation Board (CAIB) commissioned an analysis by ACTA Inc. that found the lack of reported casualties on the ground was a reasonably expected result based on the recovered debris data, census data, and mathematical methods consistent with current standards for launch debris risk analyses. [1, 2] A more detailed aircraft risk analysis, funded by the Federal Aviation Administration (FAA), used the actual records of aircraft activity at the time of the accident, and found that the probability of an impact by Columbia debris to commercial aircraft in the vicinity was at least one in a thousand, and the chance of an impact to general aviation was at least one in a hundred. [3] After FAA executives were briefed about the potential for aircraft impacts during the Columbia accident, and the challenges presented by integration of innovative vehicles such as SpaceShipOne into the National Airspace System (NAS), the FAA began to investigate a decision support tool to better manage the interface of space and air traffic in the future. In addition, the FAA asked the Common Standards Working Group (CSWG) to investigate risk and air traffic management issues that arise in the event of space vehicle accidents and to develop safety standards to govern the interface between space and air traffic. Most recently, the FAA funded a study of aircraft risk around operating areas for future flights of suborbital rockets that may be authorized by an Experimental Permit (EP). Congress mandated that the FAA develop the EP regime as a streamlined

  6. The economic burden of patient safety targets in acute care: a systematic review

    Directory of Open Access Journals (Sweden)

    Mittmann N

    2012-10-01

    Full Text Available Nicole Mittmann,1 Marika Koo,1 Nick Daneman,2 Andrew McDonald,3 Michael Baker,4 Anne Matlow,5 Murray Krahn,6 Kaveh Shojania,7 Edward Etchells71Health Outcomes and Pharmaco Economics (HOPE Research Centre, Division of Clinical Pharmacology, 2Division of Infectious Diseases, 3Quality and Patient Safety, Sunnybrook Health Sciences Centre, Toronto, ON, Canada; 4Patient Safety in Ontario, University Health Network, Toronto, ON, Canada; 5Infection Prevention and Control and Patient Safety, Hospital for Sick Children, Toronto, ON, Canada; 6Toronto Health Economics and Technology Assessment (THETA Collaborative, University of Toronto, Toronto, ON, Canada; 7University of Toronto Centre for Patient Safety, Sunnybrook Health Sciences Centre, Toronto, ON, CanadaBackground: Our objective was to determine the quality of literature in costing of the economic burden of patient safety.Methods: We selected 15 types of patient safety targets for our systematic review. We searched the literature published between 2000 and 2010 using the following terms: “costs and cost analysis,” “cost-effectiveness,” “cost,” and “financial management, hospital.” We appraised the methodologic quality of potentially relevant studies using standard economic methods. We recorded results in the original currency, adjusted for inflation, and then converted to 2010 US dollars for comparative purposes (2010 US$1.00 = 2010 €0.76. The quality of each costing study per patient safety target was also evaluated.Results: We screened 1948 abstracts, and identified 158 potentially eligible studies, of which only 61 (39% reported any costing methodology. In these 61 studies, we found wide estimates of the attributable costs of patient safety events ranging from $2830 to $10,074. In general hospital populations, the cost per case of hospital-acquired infection ranged from $2132 to $15,018. Nosocomial bloodstream infection was associated with costs ranging from $2604 to $22

  7. American Society of Clinical Oncology/Oncology Nursing Society Chemotherapy Safety Standards

    OpenAIRE

    Gullatte, Mary

    2013-01-01

    Oncology nurses have used chemotherapy standards to develop educational materials and guidelines for standardization and safety and anticipate future opportunities to partner in translating evidence into practice.

  8. 75 FR 15620 - Federal Motor Vehicle Safety Standards; Air Brake Systems

    Science.gov (United States)

    2010-03-30

    ... [Docket No. NHTSA 2009-0175] RIN 2127-AK62 Federal Motor Vehicle Safety Standards; Air Brake Systems... Federal motor vehicle safety standard for air brake systems by requiring substantial improvements in... Federal Motor Vehicle Safety Standard (FMVSS) No. 121, Air Brake Systems, to require improved stopping...

  9. 76 FR 11418 - Rear Visibility; Federal Motor Vehicle Safety Standard, Rearview Mirrors; Federal Motor Vehicle...

    Science.gov (United States)

    2011-03-02

    ... 585 [Docket No. NHTSA-2010-0162] RIN 2127-AK43 Rear Visibility; Federal Motor Vehicle Safety Standard, Rearview Mirrors; Federal Motor Vehicle Safety Standard, Low-Speed Vehicles; Phase-in Reporting... proposed rulemaking proposing to amend the agency's Federal motor vehicle safety standard on rearview...

  10. 78 FR 35975 - Proposed Information Collection; Comment Request; Safety Standards for Underground Coal Mine...

    Science.gov (United States)

    2013-06-14

    ... Request; Safety Standards for Underground Coal Mine Ventilation--Belt Entry Used as an Intake Air Course... collection related to the Safety Standards for Underground Coal Mine Ventilation--Belt Entry Used as an... Administration. Title: Safety Standards for Underground Coal Mine Ventilation--Belt Entry Used as an Intake Air...

  11. Developing glovebox robotics to meet the national robot safety standard and nuclear safety criteria

    International Nuclear Information System (INIS)

    McMahon, T.T.; Sievers, R.H.

    1991-09-01

    Development of a glove box based robotic system by the Lawrence Livermore National Laboratory (LLNL) is reported. Safety issues addressed include planning to meet the special constraints of operations within a hazardous material glove box and with hostile environments, compliance with the current and draft national robotic system safety standards, and eventual satisfaction of nuclear material handling requirements. Special attention has been required for the revision to the robot and control system models which antedate adoption of the present national safety standard. A robotic test bed, using non-radioactive surrogates is being activated at the Lawrence Livermore National Laboratory to develop the material handling system and the process interfaces for future special nuclear material processing applications. Part of this effort is to define, test, and revise adequate safety controls to ensure success when the system is eventually deployed at a DOE site. The current system is primarily for demonstration and testing, but will evolve into the baseline configuration from which the production system is to be derived. This results in special hazards associated with research activities which may not be present on a production line. Nuclear safety is of paramount importance and has been successfully addressed for 50 years in the DOE weapons production complex. It carries its particular requirements for robot systems and manual operations, as summarized below: Criticality must be avoided (materials cannot consolidate or accumulate to approach a critical mass). Radioactive materials must be confined. The public and workers must be protected from accountable radiation exposure. Nuclear material must be readily retrievable. Nuclear safety must be conclusively demonstrated through hazards analysis. 7 refs

  12. Green lasers are beyond power limits mandated by safety standards.

    Science.gov (United States)

    Lee, M H; Fox, K; Goldwasser, S; Lau, D W M; Aliahmad, B; Sarossy, M

    2016-08-01

    There has been an increasing number of reports of people losing vision from laser exposure from pocket laser pointers despite the safety limit of 1 milliwatt (1mW) imposed by the Australian government. We hypothesize that this is because commercially available red and green laser pointers are exceeding their labeled power outputs. We tested the power outputs of 4 red and 4 green lasers which were purchased for less than AUD$30 each. The average of 10 measurements was recorded for each laser. We found that 3 out of 4 red lasers conformed to the 1mW safety standard; in contrast, all of the green lasers exceeded this limit, with one of the lasers recording an output of 127.9 mW. This contrast in compliance is explained by the construction of these lasers - green lasers are typically Diode Pumped Solid State (DPSS) lasers that can emit excessive infrared (IR) radiation with poor workmanship or inconsistent adherence to practices of safe design and quality control; red lasers are diode lasers which have limited power outputs due to `Catastrophic Optical Damage' (COD). Relevant professional bodies ought to advocate more strongly for stringent testing, quality control and licensing of DPSS lasers with a view towards government intervention to banning green laser pointer use.

  13. The industry commitment to global transport safety standards

    International Nuclear Information System (INIS)

    Green, L.

    2004-01-01

    Standards and regulations have no intrinsic practical effect without taking into account those who are the object of such standards and regulations. Standards and regulations do not become operationally effective until they are implemented by the entities which are subject to them. Accordingly, there is a necessary synergy between the regulator and the regulated - the regulators whose task it is to make and enforce the rules for safe, efficient and reliable transport, and those whose job it is to transport within the rules. One has no full meaning without the other. Harmonisation issues which can impede efficient and timely implementation of regulations can occur at any stage of the process, starting with the timely publication of the IAEA Regulations, incorporation by the modal organisations, adoption by national competent authorities and finally, rendered operational by industrial transport organisations. Both, the regulator and the transporter, can be more effective in achieving their purposes when they co-operate in the interest of mutual understanding. PATRAM provides one excellent opportunity for such exchange between the regulator and the regulated - there are other important opportunities within the IAEA and international modal organisations. I suggest, however, that more could be done between the regulators and the regulated collectively to share real-life experiences with actually implementing the regulations and operating within them, and to draw appropriate lessons. In the case of the international transport safety regulatory regime, it is the nuclear transport industry, such as represented by the World Nuclear Transport Institute (WNTI), which is, of course, the object of transport safety standards and regulations. And as such, the nuclear transport industry is a principal stakeholder in the regime. Regulatory compliance is a cornerstone of the nuclear transport industry. The international nature of the fuel cycle mandates transnational movement of

  14. Using standardized insulin orders to improve patient safety in a tertiary care centre.

    Science.gov (United States)

    Doyle, Mary-Anne; Brez, Sharon; Sicoli, Silvana; De Sousa, Filomena; Keely, Erin; Malcom, Janine C

    2014-04-01

    To standardize insulin prescribing practices for inpatients, improve management of hypoglycemia, reduce reliance on sliding scales, increase use of basal-bolus insulin and improve patient safety. Patients with diabetes were admitted to 2 pilot inpatient units followed by corporate spread to all insulin-treated patients on noncritical care units in a Canadian tertiary care multicampus teaching hospital. Standardized preprinted insulin and hypoglycemia management orders, decision support tools and multidisciplinary education strategies were developed, tested and implemented by way of the Model for Improvement and The Ottawa Model for Research Process. Clinical and balance measures were evaluated through statistical process control. Patient safety was improved through a reduction in hypoglycemia and decreased dependence on correctional scales. Utilization of the preprinted orders approached the target of 70% at the end of the test period and was sustained at 89% corporately 3 years post-implementation. The implementation of a standardized, preprinted insulin order set facilitates best practices for insulin therapy, improves patient safety and is highly supported by treating practitioners. The utilization of formal quality-improvement methodology promoted efficiency, enhanced sustainability, increased support among clinicians and senior administrators, and was effective in instituting sustained practice change in a complex care centre. Crown Copyright © 2014. Published by Elsevier Inc. All rights reserved.

  15. Safety critical systems handbook a straightforward guide to functional safety : IEC 61508 (2010 edition) and related standards

    CERN Document Server

    Smith, David J

    2010-01-01

    Electrical, electronic and programmable electronic systems increasingly carry out safety functions to guard workers and the public against injury or death and the environment against pollution. The international functional safety standard IEC 61508 was revised in 2010, and this is the first comprehensive guide available to the revised standard. As functional safety is applicable to many industries, this book will have a wide readership beyond the chemical and process sector, including oil and gas, power generation, nuclear, aircraft, and automotive industries, plus project, instrumentation, design, and control engineers. * The only comprehensive guide to IEC 61508, updated to cover the 2010 amendments, that will ensure engineers are compliant with the latest process safety systems design and operation standards* Helps readers understand the process required to apply safety critical systems standards* Real-world approach helps users to interpret the standard, with case studies and best practice design examples...

  16. Evaluation of the safety of the operating nuclear power plants built to earlier standards

    International Nuclear Information System (INIS)

    Menteseoglu, S.

    2001-01-01

    The objective of this paper is to provide practical assistance on judging the safety of a nuclear power plant, on the basis of a comparison with current safety standards and operational practices. For nuclear power plants built to earlier standards for which there are questions about the adequacy of the maintenance of the plant design and operational practices, a safety review against current standards and practices can be considered a high priority. The objective of reviewing nuclear power plants built to earlier standards against current standards and practices is to determine whether there are any deviations which would have an impact on plant safety. The safety significance of the issues identified should be judged according to their implications for plant design and operation in terms of basic safety concepts such as defence in depth and safety culture. In addition, this paper provides assistance on the prioritization of corrective measures and their implementation so as to approach an acceptable level of safety

  17. 77 FR 20558 - Federal Motor Vehicle Safety Standards; Platform Lifts for Motor Vehicles; Platform Lift...

    Science.gov (United States)

    2012-04-05

    ... [Docket No. NHTSA-2012-0039] RIN 2127-AJ93 Federal Motor Vehicle Safety Standards; Platform Lifts for Motor Vehicles; Platform Lift Installations in Motor Vehicles AGENCY: National Highway Traffic Safety... amendments to the Federal motor vehicle safety standards on platform lift systems for motor vehicles. The...

  18. 77 FR 30765 - Federal Motor Vehicle Safety Standards; Electronic Stability Control Systems for Heavy Vehicles

    Science.gov (United States)

    2012-05-23

    ... Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards; Electronic Stability Control Systems for Heavy Vehicles; Proposed Rule #0;#0;Federal Register / Vol. 77 , No. 100 / Wednesday... Vehicle Safety Standards; Electronic Stability Control Systems for Heavy Vehicles AGENCY: National Highway...

  19. 29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

    Science.gov (United States)

    2010-07-01

    ... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

  20. Administrative goals and safety standards for hazard control on forested recreation sites

    Science.gov (United States)

    Lee A. Paine

    1973-01-01

    For efficient control of tree hazard on recreation sites, a specific administrative goal must be selected. A safety standard designed to achieve the selected goal and a uniform hazard-rating procedure will then promote a consistent level of safety at an acceptable cost. Safety standards can be established with the aid of data for past years, and dollar evaluations are...

  1. 78 FR 18965 - Submission for OMB Review; Comment Request: Safety Standard for Cigarette Lighters

    Science.gov (United States)

    2013-03-28

    ... Request: Safety Standard for Cigarette Lighters AGENCY: Consumer Product Safety Commission. ACTION: Notice... Commission's safety standard for cigarette lighters, 16 CFR part 1210. DATES: Written comments on this... Cigarette Lighters, 16 CFR part 1210. One comment was received in response to that notice. The commenter...

  2. 78 FR 52848 - Occupational Safety and Health Standards for Aircraft Cabin Crewmembers

    Science.gov (United States)

    2013-08-27

    ... [Docket No.: FAA-2012-0953] Occupational Safety and Health Standards for Aircraft Cabin Crewmembers AGENCY... regulation of some occupational safety and health conditions affecting cabin crewmembers on aircraft by the Occupational Safety and Health Administration. This policy statement will enhance occupational safety and...

  3. Targeted road safety programmes : a promising approach in road safety. Paper presented at `the second conference on Asian road safety', Beijing, October 28-31, 1996.

    NARCIS (Netherlands)

    Wegman, F.C.M.

    1996-01-01

    This paper gives a broad overview on targeted road safety programmes, mainly based on the activities of a so-called OECD scientific expert group, whose report has been published in 1994 (see C 2845 S (IRRD 864087). Examples of targeted road safety programmes are given in some more detail of Finland,

  4. International laser safety standardization. From the European perspective with an emphasis on materials processing

    International Nuclear Information System (INIS)

    Schulmeister, K.

    1997-08-01

    This report reviews international standards relevant to the safety of laser products and laser installations, with an emphasis on the safety of laser materials processing from the European perspective. In the first paragraphs an overview of the international standards organisations, their relative roles and ways of developing new standards is given. In the second part of the report, work currently underway in the respective standards committees is summarised and specific standards dealing with different aspects of laser safety are discussed. An appendix contains a list of standards organised in standards organisations IEC, ISO and EN). (author)

  5. The safety relief valve handbook design and use of process safety valves to ASME and International codes and standards

    CERN Document Server

    Hellemans, Marc

    2009-01-01

    The Safety Valve Handbook is a professional reference for design, process, instrumentation, plant and maintenance engineers who work with fluid flow and transportation systems in the process industries, which covers the chemical, oil and gas, water, paper and pulp, food and bio products and energy sectors. It meets the need of engineers who have responsibilities for specifying, installing, inspecting or maintaining safety valves and flow control systems. It will also be an important reference for process safety and loss prevention engineers, environmental engineers, and plant and process designers who need to understand the operation of safety valves in a wider equipment or plant design context. . No other publication is dedicated to safety valves or to the extensive codes and standards that govern their installation and use. A single source means users save time in searching for specific information about safety valves. . The Safety Valve Handbook contains all of the vital technical and standards informat...

  6. Recent developments in the IAEA safety standards: design and operation of nuclear power plants

    International Nuclear Information System (INIS)

    Saito, Takehiko

    2004-01-01

    The IAEA has been publishing a wide variety of safety standards for nuclear and radiation related facilities and activities since 1978. In 1996, a more rigorously structured approach for the preparation and review of its safety standards was introduced. Currently, based on the approach, revision of most of the standards is in completion or near completion. The latest versions of the Safety Requirements for ''Design'' and ''Operation'' of nuclear power plants were respectively published in 2000. Currently, along with this revision of the Safety Requirements, many Safety Guides have been revised. In order to clarify the complicated revision procedure, an example of the entire revision process for a Safety Guide is provided. Through actual example of the revision process, enormous amount of work involved in the revision work is clearly indicated. The current status of all of the Safety Standards for Design and that for Operation of nuclear power plants are summarized. Summary of other IAEA safety standards currently revised and available related IAEA publications, together with information on the IAEA Web Site from where these documents can be downloaded, is also provided. The standards are reviewed to determine whether revision (or new issue) is necessary in five years following publication. The IAEA safety standards will continue to be updated through comprehensive and structured approach, collaboration of many experts of the world, and reflecting good practices of the world. The IAEA safety standards will serve to provide high level of safety assurance. (author)

  7. Compliance of Iranian dentists with safety standards of oral radiology

    Science.gov (United States)

    Shahab, S; Kavosi, A; Nazarinia, H; Mehralizadeh, S; Mohammadpour, M; Emami, M

    2012-01-01

    Objectives Dentists use radiographs in their daily practice. Their knowledge and behaviour towards radiographic examination can affect patients' exposure to radiation. The aim of this study was to survey the knowledge and behaviour of Iranian dentists regarding oral radiology safety standards. Methods 1000 questionnaires were given to the participants of the 48th Annual Congress of the Iranian Dental Association, of which 700 were returned. The participants were asked about demographic data, primary knowledge of radiation protection, selection criteria, radiographic equipment and technique, methods of patient and personnel protection and management of radiographic waste. Descriptive analysis of data was performed. Results 44% of respondents said the initial radiograph they took was of the periapical view of a limited area. 12% preferred the periapical paralleling technique. F-speed film was used by 9% and E-speed film by 62%. Only 2% had digital receptors. Proper exposure time was selected by 26.5%. The use of long and rectangular collimators was 15% and 6%, respectively. 34% occasionally covered their patients with both thyroid shields and lead aprons. 36% used the position and distance rule correctly for their own protection. Proper disposal of the used processing solutions and the lead foils were done by only 1% and 3%, respectively. Conclusions It can be concluded that the majority of dentists in the study group did not select the proper method, material and equipment in order to minimize the exposure of their patient to unnecessary radiation in dental radiography. PMID:22301640

  8. Legal status of minister's notices and technology standards of 'Korea institute of nuclear safety'(KINS) to regulate nuclear safety

    International Nuclear Information System (INIS)

    Jung, S. K.; Jung, M. M.; Kim, S. W.; Jang, K. H.; Oh, B. J.

    2003-01-01

    Concerning nuclear safety or technology standards, each of 'notices' issued by minister of science and technology(MOST) empowered by law of its regulation is obviously forceful as a law, if not all. But the standards made by the chief of Korea institute of nuclear safety(KINS) to meet the tasks entrusted to KINS by MOST is only conditionally forceful as a law, that is, on the condition that law or regulation empowered the chief of KINS to make nuclear safety and/or technology standards

  9. A preliminary study on the design in architecture of nuclear and radiation safety standard system

    International Nuclear Information System (INIS)

    Song Dahu; Zhang Chi; Yang Lili; Li Bin; Liu Yingwei; An Hongzhen; Gao Siyi; Liu Ting; Meng De

    2014-01-01

    The connotation and function of nuclear and radiation safety standards are analyzed, and their relationships with the relevant laws and regulations are discussed in the paper. Some suggestions and blue print of overall architecture to build nuclear and radiation safety standard system are proposed, on the basis of researching the application status quo, existing problems and needs for nuclear and radiation safety standards in China. This work is a beneficial exploration and attempt to establish China's nuclear and radiation safety standards. (authors)

  10. Preliminary safety information document for the standard MHTGR. Volume 4

    Energy Technology Data Exchange (ETDEWEB)

    None

    1986-01-01

    This report contains information concerning: operational radionuclide control; occupational radiation protection, conduct of operations; initial test program; safety analysis; technical specifications; and quality assurance. (JDB)

  11. American National Standards and the DOE - A cooperative effort to promote nuclear criticality safety

    International Nuclear Information System (INIS)

    Rothleder, B.M.

    1996-01-01

    The U.S. Department of Energy's (DOE's) new criticality safety order, DOE Order 420.1 (open-quotes Facility Safety,close quotes October 13, 1995), Sec. 4.3 (open-quotes Nuclear Criticality Safetyclose quotes), invokes, as an integral part, 12 appropriate American National Standards Institute/American Nuclear Society (ANSI/ANS) Series-8 standards for nuclear criticality safety, but with modifications. (The order that 420.1/4.3 replaced also invoked some ANSI/ANS Series-8 standards.) These modifications include DOE operation-specific exceptions to the standards and elaborations on some of the wording in the standards

  12. The likelihood of achieving quantified road safety targets: a binary logistic regression model for possible factors.

    Science.gov (United States)

    Sze, N N; Wong, S C; Lee, C Y

    2014-12-01

    In past several decades, many countries have set quantified road safety targets to motivate transport authorities to develop systematic road safety strategies and measures and facilitate the achievement of continuous road safety improvement. Studies have been conducted to evaluate the association between the setting of quantified road safety targets and road fatality reduction, in both the short and long run, by comparing road fatalities before and after the implementation of a quantified road safety target. However, not much work has been done to evaluate whether the quantified road safety targets are actually achieved. In this study, we used a binary logistic regression model to examine the factors - including vehicle ownership, fatality rate, and national income, in addition to level of ambition and duration of target - that contribute to a target's success. We analyzed 55 quantified road safety targets set by 29 countries from 1981 to 2009, and the results indicate that targets that are in progress and with lower level of ambitions had a higher likelihood of eventually being achieved. Moreover, possible interaction effects on the association between level of ambition and the likelihood of success are also revealed. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. 77 FR 51649 - Federal Motor Vehicle Safety Standards; Motorcycle Brake Systems

    Science.gov (United States)

    2012-08-24

    ... Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards; Motorcycle Brake...; Motorcycle Brake Systems AGENCY: National Highway Traffic Safety Administration, Department of Transportation... (FMVSS) on motorcycle brake systems to add and update requirements and test procedures and to harmonize...

  14. DOE standard: Integration of environment, safety, and health into facility disposition activities. Volume 1 of 2: Technical standard

    International Nuclear Information System (INIS)

    1998-05-01

    This Department of Energy (DOE) technical standard (referred to as the Standard) provides guidance for integrating and enhancing worker, public, and environmental protection during facility disposition activities. It provides environment, safety, and health (ES and H) guidance to supplement the project management requirements and associated guidelines contained within DOE O 430.1A, Life-Cycle Asset Management (LCAM), and amplified within the corresponding implementation guides. In addition, the Standard is designed to support an Integrated Safety Management System (ISMS), consistent with the guiding principles and core functions contained in DOE P 450.4, Safety Management System Policy, and discussed in DOE G 450.4-1, Integrated Safety Management System Guide. The ISMS guiding principles represent the fundamental policies that guide the safe accomplishment of work and include: (1) line management responsibility for safety; (2) clear roles and responsibilities; (3) competence commensurate with responsibilities; (4) balanced priorities; (5) identification of safety standards and requirements; (6) hazard controls tailored to work being performed; and (7) operations authorization. This Standard specifically addresses the implementation of the above ISMS principles four through seven, as applied to facility disposition activities

  15. 77 FR 15351 - Federal Motor Vehicle Safety Standards; Theft Protection and Rollaway Prevention

    Science.gov (United States)

    2012-03-15

    ... [Docket No. NHTSA-2011-0174] RIN 2127-AK88 Federal Motor Vehicle Safety Standards; Theft Protection and... (NPRM) to amend Federal Motor Vehicle Safety Standard (FMVSS) No. 114, Theft Protection and Rollaway... requesting that certain information, including vehicle owner questionnaires (VOQs) referenced in the NPRM, be...

  16. 76 FR 41181 - Federal Motor Vehicle Safety Standards; Lamps, Reflective Devices, and Associated Equipment

    Science.gov (United States)

    2011-07-13

    ... to restore the blue and green color boundaries to Federal Motor Vehicle Safety Standard (FMVSS) No... [Docket No. NHTSA-2011-0101] RIN 2127-AK99 Federal Motor Vehicle Safety Standards; Lamps, Reflective... NPRM including removing the blue and green color boundary requirements from paragraph S14.4.1.3.2. \\2...

  17. Food safety standards in the fresh produce supply chain: advantages and disadvantages

    NARCIS (Netherlands)

    Uyttendaele, M.; Jacxsens, L.; Boxstael, Van S.; Kirezieva, K.; Luning, P.

    2015-01-01

    Abstract : Food safety standards in the fresh produce supply chain are discussed in view of the outcomes of a European Union Directorates General (EU DG) Research project FP7 Veg-i-Trade ‘Impact of climate change and international trade on the safety of fresh produce’. Various standards are outlined

  18. 76 FR 44829 - Federal Motor Vehicle Safety Standards; Air Brake Systems

    Science.gov (United States)

    2011-07-27

    ... [Docket No. NHTSA-2009-0175] RIN 2127-AK84 Federal Motor Vehicle Safety Standards; Air Brake Systems... final rule that amended the Federal motor vehicle safety standard for air brake systems by requiring... July 27, 2009, NHTSA published a final rule in the Federal Register amending Federal Motor Vehicle...

  19. 75 FR 5553 - Federal Motor Vehicle Safety Standards; Motor Vehicle Brake Fluids

    Science.gov (United States)

    2010-02-03

    ... [Docket No. NHTSA-2010-0012 RIN 2127-AK58 Federal Motor Vehicle Safety Standards; Motor Vehicle Brake... Vehicle Brake Fluids, so that brake fluids would be tested with ethylene, propylene, and diene terpolymer... Analyses and Notices VIII. Public Participation I. Background Federal Motor Vehicle Safety Standard (FMVSS...

  20. 45 CFR 2543.84 - Contract Work Hours and Safety Standards Act.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Contract Work Hours and Safety Standards Act. 2543... OTHER NON-PROFIT ORGANIZATIONS Statutory Compliance § 2543.84 Contract Work Hours and Safety Standards Act. Where applicable, all contracts awarded by recipients in excess of $2000 for construction...

  1. R&D for Safety Codes and Standards: Materials and Components Compatibility

    Energy Technology Data Exchange (ETDEWEB)

    Somerday, Brian P. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); LaFleur, Chris [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Marchi, Chris San [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2015-08-01

    This project addresses the following technical barriers from the Safety, Codes and Standards section of the 2012 Fuel Cell Technologies Office Multi-Year Research, Development and Demonstration Plan (section 3.8): (A) Safety data and information: limited access and availability (F) Enabling national and international markets requires consistent RCS (G) Insufficient technical data to revise standards.

  2. 75 FR 38432 - Railroad Safety Appliance Standards, Miscellaneous Revisions

    Science.gov (United States)

    2010-07-02

    ... innovations and modern ergonomic design principles that would increase the safety of persons who work on and... government (FRA and Transport Canada participate as non-voting members), as well as ergonomics experts. The...

  3. Revision of AESJ standard 'the code of implemnetation of periodic safety review of nuclear power plants'

    International Nuclear Information System (INIS)

    Hirano, Masashi; Narumiya, Yoshiyuki

    2010-01-01

    The Periodic Safety Review (PSR) was launched in June 1992, when the Agency for Natural Resources and Energy issued a notification that required licensees to conduct comprehensive review on the safety of each existing nuclear power plant (NPP) once approximately every ten years based on the latest technical findings for the purpose of improving the safety of the NPP. In 2006, the Standard Committee of the Atomic Energy Society of Japan established the first version of 'The Standard of Implementation for Periodic Safety Review of Nuclear Power Plants: 2006'. Taking into account developments in safety regulation of PSR after the issuance of the first version, the Standard Committee has revised the Standard. This paper summarizes background on PSR, such developments are major contents of the Standard as well as the focal points of the revision. (author)

  4. 16 CFR 1203.53 - Interim safety standards.

    Science.gov (United States)

    2010-01-01

    ...—CAN/CSA-D113.2-M89, (4) Snell Memorial Foundation (Snell) 1990 Standard for Protective Headgear for Use in Bicycling (designation B-90), ( 5) Snell 1990 Standard for Protective Headgear for Use in Bicycling, including March 9, 1994 Supplement (designation B-90S), (6) Snell 1994 Standard for Protective...

  5. 2016 Updated American Society of Clinical Oncology/Oncology Nursing Society Chemotherapy Administration Safety Standards, Including Standards for Pediatric Oncology.

    Science.gov (United States)

    Neuss, Michael N; Gilmore, Terry R; Belderson, Kristin M; Billett, Amy L; Conti-Kalchik, Tara; Harvey, Brittany E; Hendricks, Carolyn; LeFebvre, Kristine B; Mangu, Pamela B; McNiff, Kristen; Olsen, MiKaela; Schulmeister, Lisa; Von Gehr, Ann; Polovich, Martha

    2016-12-01

    Purpose To update the ASCO/Oncology Nursing Society (ONS) Chemotherapy Administration Safety Standards and to highlight standards for pediatric oncology. Methods The ASCO/ONS Chemotherapy Administration Safety Standards were first published in 2009 and updated in 2011 to include inpatient settings. A subsequent 2013 revision expanded the standards to include the safe administration and management of oral chemotherapy. A joint ASCO/ONS workshop with stakeholder participation, including that of the Association of Pediatric Hematology Oncology Nurses and American Society of Pediatric Hematology/Oncology, was held on May 12, 2015, to review the 2013 standards. An extensive literature search was subsequently conducted, and public comments on the revised draft standards were solicited. Results The updated 2016 standards presented here include clarification and expansion of existing standards to include pediatric oncology and to introduce new standards: most notably, two-person verification of chemotherapy preparation processes, administration of vinca alkaloids via minibags in facilities in which intrathecal medications are administered, and labeling of medications dispensed from the health care setting to be taken by the patient at home. The standards were reordered and renumbered to align with the sequential processes of chemotherapy prescription, preparation, and administration. Several standards were separated into their respective components for clarity and to facilitate measurement of adherence to a standard. Conclusion As oncology practice has changed, so have chemotherapy administration safety standards. Advances in technology, cancer treatment, and education and training have prompted the need for periodic review and revision of the standards. Additional information is available at http://www.asco.org/chemo-standards .

  6. 77 FR 10358 - Acceptance of ASTM F963-11 as a Mandatory Consumer Product Safety Standard

    Science.gov (United States)

    2012-02-22

    ... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Chapter II Acceptance of ASTM F963-11 as a Mandatory Consumer Product Safety Standard AGENCY: Consumer Product Safety Commission. ACTION: Acceptance of standard..., (CPSIA), Public Law 110-314, made the provisions of ASTM F963-07, Standard Consumer Safety Specifications...

  7. Developing international safety standards for the geological disposal of radioactive waste

    International Nuclear Information System (INIS)

    Metcalf, P.

    2001-01-01

    In the context of the International Atomic Energy Agency's (IAEA) programme to create a corpus of internationally accepted Radioactive Waste Safety Standards (RADWASS), focus is currently being placed on establishing standards for the 'geological disposal of radioactive waste'. This is a challenging task and to help the standards development process there is a need to stimulate discussion of some of the associated scientific and technical issues. A number of position papers developed in recent years by a subgroup of the Waste Safety Standards Committee (WASSC), the subgroup on Principles and Criteria for Radioactive Waste Disposal, address many of the relevant issues. These include a common safety based framework for radioactive waste disposal, appropriate time frames for safety assessment, different possible indicators of long-term safety, the safety implications of reversibility and retrievability, the assessment of possible human intrusion into the repository, the role and limitations of institutional control, establishing reference critical groups and biospheres for long-term assessment, and what is meant by 'compliance' with the standards. These papers will be discussed at a Specialists Meeting to be held at the IAEA in June 2001 as a means of establishing the extent to which they enjoy the general support of experts. In order to broaden that consensus, the conclusions reached at the Specialists Meeting on the issues listed above will be presented and discussed with participants at a number of international meetings. Later this year, a draft safety standard on the geological disposal of radioactive waste which takes account of the consensus positions reached through the various consultations will be submitted for the consideration of Waste Safety Standards Committee (WASSC), the officially approved body within the IAEA for the review and approval of waste safety standards. The Committee is made up of government appointed radioactive waste regulators

  8. A German perspective on advances in safety standards and regulations

    International Nuclear Information System (INIS)

    Berg, H.P.; Herttrich, P.M.

    1993-01-01

    At present, different proposals for evolutionary or innovative reactors are under consideration. Therefore, it is necessary that the regulators give guidance on the required safety characteristics of future designs of nuclear power plants. On the one hand, existing regulations have to be updated according to the current state of science and technology. Best available and adequately approved technology has to be used as a yardstick for the acceptability of future basic design features. On the other hand, potential safety features of innovative or revolutionary designs must be considered as serious competitors and potential technical solutions taking the state of maturity of the concepts, the extent of practical experience and the level of effort needed for realization into due account. On this background, recent developments of the Atomic Energy Act, of safety regulations and investigations of requirements for future designs in the Federal Republic of Germany and current projects of international cooperation are presented. (author)

  9. Consensus standards utilized and implemented for nuclear criticality safety in Japan

    International Nuclear Information System (INIS)

    Nomura, Yasushi; Okuno, Hiroshi; Naito, Yoshitaka

    1996-01-01

    The fundamental framework for the criticality safety of nuclear fuel facilities regulations is, in many advanced countries, generally formulated so that technical standards or handbook data are utilized to support the licensing safety review and to implement its guidelines. In Japan also, adequacy of the safety design of nuclear fuel facilities is checked and reviewed on the basis of licensing safety review guides. These guides are, first, open-quotes The Basic Guides for Licensing Safety Review of Nuclear Fuel Facilities,close quotes and as its subsidiaries, open-quotes The Uranium Fuel Fabrication Facility Licensing Safety Review Guidesclose quotes and open-quotes The Reprocessing Facility Licensing Safety Review Guides.close quotes The open-quotes Nuclear Criticality Safety Handbook close-quote of Japan and the Technical Data Collection are published and utilized to supply related data and information for the licensing safety review, such as for the Rokkasho reprocessing plant. The well-established technical standards and data abroad such as those by the American Nuclear Society and the American National Standards Institute are also utilized to complement the standards in Japan. The basic principles of criticality safety control for nuclear fuel facilities in Japan are duly stipulated in the aforementioned basic guides as follows: 1. Guide 10: Criticality control for a single unit; 2. Guide 11: Criticality control for multiple units; 3. Guide 12: Consideration for a criticality accident

  10. Improving car-carrier safety through Performance-Based Standards

    CSIR Research Space (South Africa)

    De Saxe, C

    2012-10-01

    Full Text Available 2012 Slide 4 Prescriptive Standards Performance-Based Standards Images courtesy of the Australian National Transport Commission Background: Performance-Based Standards ? CSIR 2012 Slide 5 Manoeuvre/Test Performance Standard Low-speed 90? turn Low... Slide 6 Frontal swing Tail swing Background: South African car-carriers ? CSIR 2012 Slide 7 4 .3 m 4. 6 m 18.5 m 4. 3 m 4. 6 m 22 m22.5 m 19 m WITH abnormal load permit Courtesy Unipower (Natal) and Kh?ssbohrer. WITHOUT abnormal...

  11. Improving Patient Safety and Satisfaction 
With Standardized Bedside Handoff and Walking Rounds.

    Science.gov (United States)

    Taylor, Julia S

    2015-08-01

    In 2009, the Joint Commission identified a standardized approach to handoff communication as a patient safety goal to reduce communication errors. Evidence suggests that a structured handoff report, combined with active patient participation, reduces communication errors and promotes patient safety. Research shows that bedside handoff increases nurses' accountability by visualizing the patient and exchanging information at the point of care. Based on recommendations from the Joint Commission, the Robert Wood Johnson Foundation, and broader research literature, a standardized approach to bedside handoff and walking rounds was implemented on an inpatient surgical oncology unit. At a Glance • A standardized handoff communication tool is recognized as a Joint Commission patient safety goal to reduce communication errors and improve patient safety. • The benefits of patient safety and satisfaction outweigh the barriers to implementing a bedside handoff report. • A standardized, nurse-driven, electronic report should guide transfer of information during bedside handoff.

  12. Connoted hazard and perceived importance of fluorescent, neon, and standard safety colors.

    Science.gov (United States)

    Zielinska, O A; Mayhorn, C B; Wogalter, M S

    2017-11-01

    The perceived hazard and rated importance of standard safety, fluorescent, and neon colors are investigated. Colors are used in warnings to enhance hazard communication. Red has consistently been rated as the highest in perceived hazard. Orange, yellow, and black are the next highest in connoted hazard; however, there is discrepancy in their ordering. Safety standards, such as ANSI Z535.1, also list colors to convey important information, but little research has examined the perceived importance of colors. In addition to standard safety colors, fluorescent colors are more commonly used in warnings. Understanding hazard and importance perceptions of standard safety and fluorescent colors is necessary to create effective warnings. Ninety participants rated and ranked a total of 33 colors on both perceived hazard and perceived importance. Rated highest were the safety red colors from the American National Standard Institute (ANSI), International Organization for Standardization (ISO), and Federal Highway Administration (FHWA) together with three fluorescent colors (orange, yellow, and yellow-green) from 3 M on both dimensions. Rankings were similar to ratings except that fluorescent orange was the highest on perceived hazard, while fluorescent orange and safety red from the ANSI were ranked as the highest in perceived importance. Fluorescent colors convey hazard and importance levels as high as the standard safety red colors. Implications for conveying hazard and importance in warnings through color are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. 75 FR 39871 - Manufactured Home Construction and Safety Standards

    Science.gov (United States)

    2010-07-13

    ... Source. U--PS 2-04 2005 Voluntary Product Standard 3280.304(b) Performance Standard for Wood- Based... Burning Appliances. U--UL 181 1998 Factory Made Air Ducts and Air 3280.703 Connectors. 3280.715(a) K...

  14. Flood risk and economically optimal safety targets for coastal flood defense systems

    NARCIS (Netherlands)

    Dupuits, E.J.C.; Schweckendiek, T.

    2015-01-01

    A front defense can improve the reliability of a rear defense in a coastal flood defense system. The influence of this interdependency on the accompanying economically optimal safety targets of both front and rear defense is investigated. The results preliminary suggest that the optimal safety level

  15. Nursing Application of Oral Chemotherapy Safety Standards:An Informal Survey.

    Science.gov (United States)

    LeFebvre, Kristine B; Felice, Toni L

    2016-06-01

    As the use of oral chemotherapy continues to rise, new approaches are needed to ensure patient safety. To help address this issue, the American Society of Clinical Oncology/Oncology Nursing Society (ONS) Chemotherapy Administration Safety Standards were expanded in 2013 to include additional measures addressing oral anticancer drugs (OACs). Because minimal data assessing the application of these standards exist, ONS conducted an independent survey of oncology nurses to evaluate the application of these standards in practice as they relate to several areas of OAC use: assessment, consent, patient education, drug verification, and monitoring. The data revealed that, although the standards are followed in many settings, a large number of settings do not have processes in place to support safety standards and ensure patient safety when administering OACs. Information gained in this informal survey can be used to guide additional research and educational initiatives.

  16. Health and Safety Checklist for Early Care and Education Programs to Assess Key National Health and Safety Standards.

    Science.gov (United States)

    Alkon, Abbey; Rose, Roberta; Wolff, Mimi; Kotch, Jonathan B; Aronson, Susan S

    2016-01-01

    The project aims were to (1) develop an observational Health and Safety Checklist to assess health and safety practices and conditions in early care and education (ECE) programs using Stepping Stones To Caring For Our Children, 3rd Edition national standards, (2) pilot test the Checklist, completed by nurse child care health consultants, to assess feasibility, ease of completion, objectivity, validity, and reliability, and (3) revise the Checklist based on the qualitative and quantitative results of the pilot study. The observable national health and safety standards were identified and then rated by health, safety, and child care experts using a Delphi technique to validate the standards as essential to prevent harm and promote health. Then, child care health consultants recruited ECE centers and pilot tested the 124-item Checklist. The pilot study was conducted in Arizona, California and North Carolina. The psychometric properties of the Checklist were assessed. The 37 participating ECE centers had 2627 children from ethnically-diverse backgrounds and primarily low-income families. The child care health consultants found the Checklist easy to complete, objective, and useful for planning health and safety interventions. The Checklist had content and face validity, inter-rater reliability, internal consistency, and concurrent validity. Based on the child care health consultant feedback and psychometric properties of the Checklist, the Checklist was revised and re-written at an 8th grade literacy level. The Health and Safety Checklist provides a standardized instrument of observable, selected national standards to assess the quality of health and safety in ECE centers.

  17. Derivation of Building Energy Use Intensity Targets for ASHRAE Standard 100

    Energy Technology Data Exchange (ETDEWEB)

    Sharp, Terry R [ORNL

    2014-06-01

    The steps to develop the building energy use intensity targets for American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 100, Energy Efficiency in Existing Buildings are outlined in this report. The analyses were conducted by Oak Ridge National Laboratory (ORNL) in collaboration with the ASHRAE Standard 100 committee and Dr. Alexander Zhivov, the subcommittee chair responsible for targets development.

  18. The history and evolution of laser safety standards

    Energy Technology Data Exchange (ETDEWEB)

    Sliney, D. [USA Center for Health Promotion and Preventive Medicine, Gunpowder, MD (United States)

    2004-07-01

    Laser safety became a concern within a year of the first successful laser operation in 1960. The first biological research studies and publications on eye hazards appeared in 1961. Maximum Permissible Exposure (MPE) limits, threshold limit values (TLVs), or simply Exposure Limits (ELs) have evolved from the mid 1960s. Regardless of the terminology applied, these limits are now virtually the same worldwide (ICNIRP, 2000; ACGIH, 2000; ANSI, 2000; IEC/EN, 2001). This wide consensus has not always existed. Several issues have remained at the forefront of all efforts to set human exposure limits for laser radiation. These issues include concerns over whether there exists any damage mechanisms that are unique to coherent laser radiation, or can one expect differences between damage produced by a laser when compared to incoherent optical radiation within the same wavelength region. Indeed, questions have always existed with regard to the dominance (within any spectral region and exposure duration) of different damage mechanisms (e.g., thermal, photochemical, thermo-acoustic, optical-breakdown) and the role played by various conventional and non-linear optical phenomena in biological tissues. Other issues relate to the geometry of heat flow, the dissipation of energy and the biological response. Practical laser safety owes much to the development of laser safety classification after it was recognized that the probability of an accidental eye injury was very remote in many applications and measurements of the primary beam did little to identify reflection hazards. Unfortunately, the probabilistic risk analysis that led to the rationale and the definitions of the early laser safety classification scheme are now too frequently overlooked. (orig.)

  19. 78 FR 73965 - Manufactured Home Construction and Safety Standards

    Science.gov (United States)

    2013-12-09

    ... Using a Radiant Heat Source. U--NIST PS 2-04 2004 Voluntary Product 3280.304(b). Standard Performance... 3280.702, 3280.703, 3280.715(a). and Air Connectors. K. Accessibility Requirements for Persons With...

  20. Forest management practices and the occupational safety and health administration logging standard

    Science.gov (United States)

    John R. Myers; David Elton Fosbroke

    1995-01-01

    The Occupational Safety and Health Administration (OSHA) has established safety and health regulations for the logging industry. These new regulations move beyond the prior OSHA pulpwood harvesting standard by including sawtimber harvesting operations. Because logging is a major tool used by forest managers to meet silvicultural goals, managers must be aware of what...

  1. 76 FR 49532 - Federal Motor Vehicle Safety Standards; Electronic Stability Control; Technical Report on the...

    Science.gov (United States)

    2011-08-10

    ... probability that a vehicle would be involved in a fatal crash. For passenger cars, the reductions are 5...-0112] Federal Motor Vehicle Safety Standards; Electronic Stability Control; Technical Report on the Effectiveness of Electronic Stability Control Systems for Cars and LTVs AGENCY: National Highway Traffic Safety...

  2. 77 FR 19722 - Petitions for Modification of Application of Existing Mandatory Safety Standards

    Science.gov (United States)

    2012-04-02

    ... modify the application of any mandatory safety standard to a coal or other mine if the Secretary of Labor... necessary. To ensure the safety of the miners in active mines and to protect miners in future mines that may mine in close proximity to these same active mines it is necessary to determine the exact location and...

  3. Quality and safety standards in the food industry, developments and challenges

    NARCIS (Netherlands)

    Trienekens, J.H.; Zuurbier, P.J.P.

    2008-01-01

    Consumer concerns related to food safety scandals and globalization of food production have resulted in a global and interconnected system for the production and distribution of food. In the last decade many public and private standards on food safety and quality have been developed as a result of

  4. 75 FR 51521 - Federal Motor Vehicle Safety Standards; Air Brake Systems; Technical Report on the Effectiveness...

    Science.gov (United States)

    2010-08-20

    ...-0116] Federal Motor Vehicle Safety Standards; Air Brake Systems; Technical Report on the Effectiveness... report. SUMMARY: This notice announces NHTSA's publication of a Technical Report its existing Safety..., 2010. ADDRESSES: Report: The technical report is available on the Internet for viewing in PDF format at...

  5. Safety implications of standardized continuous quality improvement programs in community pharmacy.

    Science.gov (United States)

    Boyle, Todd A; Ho, Certina; Mackinnon, Neil J; Mahaffey, Thomas; Taylor, Jeffrey M

    2013-06-01

    Standardized continuous quality improvement (CQI) programs combine Web-based technologies and standardized improvement processes, tools, and expectations to enable quality-related events (QREs) occurring in individual pharmacies to be shared with pharmacies in other jurisdictions. Because standardized CQI programs are still new to community pharmacy, little is known about how they impact medication safety. This research identifies key aspects of medication safety that change as a result of implementing a standardized CQI program. Fifty-three community pharmacies in Nova Scotia, Canada, adopted the SafetyNET-Rx standardized CQI program in April 2010. The Institute for Safe Medication Practices (ISMP) Canada's Medication Safety Self-Assessment (MSSA) survey was administered to these pharmacies before and 1 year into their use of the SafetyNET-Rx program. The nonparametric Wilcoxon signed-rank test was used to explore where changes in patient safety occurred as a result of SafetyNETRx use. Significant improvements occurred with quality processes and risk management, staff competence, and education, and communication of drug orders and other information. Patient education, environmental factors, and the use of devices did not show statistically significant changes. As CQI programs are designed to share learning from QREs, it is reassuring to see that the largest improvements are related to quality processes, risk management, staff competence, and education.

  6. American National Standard administrative practices for nuclear criticality safety, ANSI/ANS-8.19

    International Nuclear Information System (INIS)

    Smith, D.R.; Carson, R.W.

    1991-01-01

    American National Standard Administrative Practices for Nuclear Criticality Safety, ANSI/ANS-8.19, provides guidance for the administration of an effective program to control the risk of nuclear criticality in operations with fissile material outside reactors. The several sections of the standard address the responsibilities of management, supervisory personnel, and the criticality safety staff, as well as requirements and suggestions for the content of operating procedures, process evaluations, material control procedures, and emergency procedures

  7. 76 FR 58167 - Safety Standard for Play Yards

    Science.gov (United States)

    2011-09-20

    ... developed by ASTM International (formerly the American Society for Testing and Materials), ASTM F 406-11... included: broken or detached components from music boxes, trays, mirrors, and toy holders. Two injuries... order specified in the standard because the testing sequence can influence the test results. Therefore...

  8. Research on the General Framework of the Construction of Nuclear and Radiation Safety Standard System in China

    Science.gov (United States)

    Song, Dahu; Liu, Ting; Gao, Siyi; Tian, Yu; Yang, Lili; Zhang, Qiaoer

    2018-01-01

    In this paper, the general framework and suggestion for the construction of China Nuclear and radiation safety standard system are put forward. The relationship of nuclear and radiation safety standards with the relevant laws and regulations is discussed. The status quo, existing problems and requirements of nuclear and radiation safety standard are analysed in China. The research work has laid a foundation for the establishment and improvement of China’s nuclear and radiation safety standards system, and has made a useful exploration.

  9. Virtual records : standardized safety training and web-based record keeping reduces training duplication

    Energy Technology Data Exchange (ETDEWEB)

    Stastny, R.P.

    2010-02-15

    Duplication in safety training is having a significant impact on the oil and gas industry in Canada. This article discussed a method of standardizing safety training and ensuring that accredited courses are completed by individual workers. Internet servers provided by the Alberta government are being used by the Health and Safety Association Network (HSAN) to provide access to safety training records. The program was initiated in collaboration with local governments, unions, labour providers, and other safety associations. The industry training and tracking system (ITTS) database was made fully operational in 2009. The ITTS aims to have the safety records of over a million people stored in its database within a 5-year period. The list of safety courses accepted by the HSAN administrator will also continue to expand.

  10. US Department of Energy DOE Nevada Operations Office, Nevada Test Site: Underground safety and health standards

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The Nevada Test Site Underground Safety and Health Standards Working Group was formed at the direction of John D. Stewart, Director, Nevada Test Site Office in April, 1990. The objective of the Working Group was to compile a safety and health standard from the California Tunnel Safety Orders and OSHA for the underground operations at the NTS, (excluding Yucca Mountain). These standards are called the NTS U/G Safety and Health Standards. The Working Group submits these standards as a RECOMMENDATION to the Director, NTSO. Although the Working Group considers these standards to be the most integrated and comprehensive standards that could be developed for NTS Underground Operations, the intent is not to supersede or replace any relevant DOE orders. Rather the intent is to collate the multiple safety and health references contained in DOE Order 5480.4 that have applicability to NTS Underground Operations into a single safety and heath standard to be used in the underground operations at the NTS. Each portion of the standard was included only after careful consideration by the Working Group and is judged to be both effective and appropriate. The specific methods and rationale used by the Working Group are outlined as follows: The letter from DOE/HQ, dated September 28, 1990 cited OSHA and the CTSO as the safety and health codes applicable to underground operations at the NTS. These mandated codes were each originally developed to be comprehensive, i.e., all underground operations of a particular type (e.g., tunnels in the case of the CTSO) were intended to be adequately regulated by the appropriate code. However, this is not true; the Working Group found extensive and confusing overlap in the codes in numerous areas. Other subjects and activities were addressed by the various codes in cursory fashion or not at all.

  11. US Department of Energy DOE Nevada Operations Office, Nevada Test Site: Underground safety and health standards

    International Nuclear Information System (INIS)

    1993-05-01

    The Nevada Test Site Underground Safety and Health Standards Working Group was formed at the direction of John D. Stewart, Director, Nevada Test Site Office in April, 1990. The objective of the Working Group was to compile a safety and health standard from the California Tunnel Safety Orders and OSHA for the underground operations at the NTS, (excluding Yucca Mountain). These standards are called the NTS U/G Safety and Health Standards. The Working Group submits these standards as a RECOMMENDATION to the Director, NTSO. Although the Working Group considers these standards to be the most integrated and comprehensive standards that could be developed for NTS Underground Operations, the intent is not to supersede or replace any relevant DOE orders. Rather the intent is to collate the multiple safety and health references contained in DOE Order 5480.4 that have applicability to NTS Underground Operations into a single safety and heath standard to be used in the underground operations at the NTS. Each portion of the standard was included only after careful consideration by the Working Group and is judged to be both effective and appropriate. The specific methods and rationale used by the Working Group are outlined as follows: The letter from DOE/HQ, dated September 28, 1990 cited OSHA and the CTSO as the safety and health codes applicable to underground operations at the NTS. These mandated codes were each originally developed to be comprehensive, i.e., all underground operations of a particular type (e.g., tunnels in the case of the CTSO) were intended to be adequately regulated by the appropriate code. However, this is not true; the Working Group found extensive and confusing overlap in the codes in numerous areas. Other subjects and activities were addressed by the various codes in cursory fashion or not at all

  12. Standardized high current solid targets for cyclotron production of radionuclides

    International Nuclear Information System (INIS)

    Al-Jammaz, Ibrahim

    2000-01-01

    The Cyclotron and Radiopharmaceuticals Department (CRP) is an advanced and modern facility that encompasses two essential components: radioisotope research, and radiopharmaceuticals manufacturing. Radiopharmaceuticals manufacturing program is not only quite unique, but also an essential component of King Faisal Specialist Hospital and Research Center (KFSH and RC) in providing quality patient care for the population of the Kingdom. Accurate diagnosis and therapy with medical imaging equipment requires quality radiopharmaceuticals that are available readily and with reliability. The CRP Department provides that quality and reliability. Research activities of the CRP Department are focused on developing new radiotracers with potential usefulness in biomedical research and clinical applications. Research projects consist of: developing cyclotron targetry for radioisotope production; developing synthesis methods for radiolabeling biomolecules; and developing analytical methods for quality control. The CRP Department operates a semi-commercial radiopharmaceuticals manufacturing program that supplies the diagnostic radioactive products to several hospitals in the Kingdom and neighboring countries. These products for clinical applications are produced according to the international standards of Good Manufacturing Practices of quality and efficacy. At the heart of the radioisotope program is a medium energy cyclotron capable of accelerating a number of particles for transformation of non-radioactive atoms into radionuclides that are the primary sources for research and development activities, and for preparing radiopharmaceuticals. In addition to having the only cyclotron facility in the region, KFSH and RC also has the only Positron Emission Tomography Center (PET) in this part of the world. This combination of cyclotron and the ultra modern PET facility translates into advanced and specialized care for the patients at KFSH and RC

  13. 77 FR 76005 - Submission for OMB Review; Comment Request-Safety Standard for Walk-Behind Power Lawn Mowers

    Science.gov (United States)

    2012-12-26

    ... COMMISSION Submission for OMB Review; Comment Request--Safety Standard for Walk-Behind Power Lawn Mowers... approval of a collection of information associated with the Commission's safety standard for walk- behind... required in the Safety Standard for Walk-Behind Power Lawn Mowers (16 CFR Part 1205). Three comments were...

  14. 77 FR 66638 - The Standard on Process Safety Management of Highly Hazardous Chemicals; Extension of the Office...

    Science.gov (United States)

    2012-11-06

    ... Standard on Process Safety Management of Highly Hazardous Chemicals; Extension of the Office of Management...) approval of the information collection requirements specified in the Standard on Process Safety Management...: The Standard on Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.119). OMB Number...

  15. 77 FR 76003 - Submission for OMB Review; Comment Request-Safety Standard for Omnidirectional Citizens Band Base...

    Science.gov (United States)

    2012-12-26

    ... Request--Safety Standard for Omnidirectional Citizens Band Base Station Antennas AGENCY: Consumer Product... information associated with the Commission's safety standard for omnidirectional citizens band base station... information required in the Safety Standard for Omnidirectional Citizens Band Base Station (16 CFR Part 1204...

  16. Radiation safety standards: space hazards vs. terrestrial hazards

    International Nuclear Information System (INIS)

    Sinclair, W.K.

    1983-01-01

    Policies regarding the setting of standards for radiation exposure for astronauts and other workers in space are discussed. The first recommendations for dose limitation and the underlying philosophy of these recommendations, which were put out in 1970, are examined, and consequences for the standards if the same philosophy of allowing a doubling in overall cancer risk for males aged 30-35 over a 20-year period were applied to more recent risk estimates are calculated, leading to values about a factor of 4 below the 1970 recommendation. Standards set since 1930 for terrestrial occupational exposures, which lead to a maximum lifetime risk of about 2.3 percent, are then considered, and the space and terrestrial exposure risks for fatal cancers at maximum lifetime dose are compared with industrial accidental death rates. Attention is also given to the question of the potential effects of HZE particles in space and to the possibility that HZE particle effects, rather than radiation carcinogenesis, might be the limiting factor. 17 references

  17. Impact of New Radiation Safety Standards on Licensing Requirements of Nuclear Power Plant

    International Nuclear Information System (INIS)

    Strohal, P.; Subasic, D.; Valcic, I.

    1996-01-01

    As the outcomes of the newly introduced safety philosophies, new and more strict safety design requirements for nuclear installation are expected to be introduced. New in-depth defence measures should be incorporated into the design and operation procedure for a nuclear installation, to compensate for potential failures in protection or safety measures. The new requirements will also apply to licensing of NPP's operation as well as to licensing of nuclear sites, especially for radioactive waste disposal sites. This paper intends to give an overview of possible impacts of new internationally agreed basic safety standards with respect to NPP and related technologies. Recently issued new basic safety standards for radiation protection are introducing some new safety principles which may have essential impact on future licensing requirements regarding nuclear power plants and radioactive waste installations. These new standards recognize exposures under normal conditions ('practices') and intervention conditions. The term interventions describes the human activities that seek to reduce the existing radiation exposure or existing likelihood of incurring exposure which is not part of a controlled practice. The other new development in safety standards is the introduction of so called potential exposure based on the experience gained from a number of radiation accidents. This exposure is not expected to be delivered with certainty but it may result from an accident at a source or owing to an event or sequence of events of a probabilistic nature, including equipment failures and operating errors. (author)

  18. Assessment of Offshore Wind System Design, Safety, and Operation Standards

    Energy Technology Data Exchange (ETDEWEB)

    Sirnivas, Senu [National Renewable Energy Lab. (NREL), Golden, CO (United States); Musial, Walt [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bailey, Bruce [AWS Trupower LLC, Albany, NY (United States); Filippelli, Matthew [AWS Trupower LLC, Albany, NY (United States)

    2014-01-01

    This report is a deliverable for a project sponsored by the U.S. Department of Energy (DOE) entitled National Offshore Wind Energy Resource and Design Data Campaign -- Analysis and Collaboration (contract number DE-EE0005372; prime contractor -- AWS Truepower). The project objective is to supplement, facilitate, and enhance ongoing multiagency efforts to develop an integrated national offshore wind energy data network. The results of this initiative are intended to 1) produce a comprehensive definition of relevant met-ocean resource assets and needs and design standards, and 2) provide a basis for recommendations for meeting offshore wind energy industry data and design certification requirements.

  19. Research on the management and endorsement of nuclear safety standards in the United States and its revelation for China

    Science.gov (United States)

    Liu, Ting; Tian, Yu; Yang, Lili; Gao, Siyi; Song, Dahu

    2018-01-01

    This paper introduces the American standard system, the Nuclear Regulatory Commission (NRC)’s responsibility, NRC nuclear safety regulations and standards system, studies on NRC’s standards management and endorsement mode, analyzes the characteristics of NRC standards endorsement management, and points out its disadvantages. This paper draws revelation from the standard management and endorsement model of NRC and points suggestion to China’s nuclear and radiation safety standards management.The issue of the “Nuclear Safety Law”plays an important role in China’s nuclear and radiation safety supervision. Nuclear and radiation safety regulations and standards are strong grips on the implementation of “Nuclear Safety Law”. This paper refers on the experience of international advanced countriy, will effectively promote the improvement of the endorsed management of China’s nuclear and radiation safety standards.

  20. 41 CFR 50-204.2 - General safety and health standards.

    Science.gov (United States)

    2010-07-01

    ... the subparagraphs of this paragraph whenever a standard deals with an occupational safety or health... standards requiring safe and healthful working conditions or surroundings in: Subchapter B—Respiratory... requiring safe and healthful working conditions or surroundings in: Part 211—Coal-Mining Operating and...

  1. 78 FR 21850 - Federal Motor Vehicle Safety Standards; Matters Incorporated by Reference

    Science.gov (United States)

    2013-04-12

    ... to the 1985 Annual Book of ASTM Standards, Vol. 05.04, ``Test Methods for Rating Motor, Diesel... for Rating Motor, Diesel, Aviation Fuels, A2. Reference Materials and Blending Accessories, (``ASTM... [Docket No. NHTSA-2011-0185] RIN 2127-AL25 Federal Motor Vehicle Safety Standards; Matters Incorporated by...

  2. 78 FR 52679 - Safety Standard for Cigarette Lighters; Adjusted Customs Value for Cigarette Lighters

    Science.gov (United States)

    2013-08-26

    ... Part 1210 Cigarette lighters, Consumer protection, Fire prevention, Hazardous materials, Infants and... 1210 Safety Standard for Cigarette Lighters; Adjusted Customs Value for Cigarette Lighters AGENCY... adjusted to $2.50. This rule revises the cigarette lighter standard to state that the import value has...

  3. 78 FR 2797 - Federal Motor Vehicle Safety Standards; Minimum Sound Requirements for Hybrid and Electric Vehicles

    Science.gov (United States)

    2013-01-14

    ... Costs) II. Background Whether or not a vehicle can be easily detected by the sound it makes is a product... (passenger cars, vans, sport utility vehicles and pickup trucks), as well as LSVs, motorcycles, medium and... standard we are proposing today would be enforced in the same fashion as other safety standards issued...

  4. Planning the Unplanned Experiment: Assessing the Efficacy of Standards for Safety Critical Software

    Science.gov (United States)

    Graydon, Patrick J.; Holloway, C. Michael

    2015-01-01

    We need well-founded means of determining whether software is t for use in safety-critical applications. While software in industries such as aviation has an excellent safety record, the fact that software aws have contributed to deaths illustrates the need for justi ably high con dence in software. It is often argued that software is t for safety-critical use because it conforms to a standard for software in safety-critical systems. But little is known about whether such standards `work.' Reliance upon a standard without knowing whether it works is an experiment; without collecting data to assess the standard, this experiment is unplanned. This paper reports on a workshop intended to explore how standards could practicably be assessed. Planning the Unplanned Experiment: Assessing the Ecacy of Standards for Safety Critical Software (AESSCS) was held on 13 May 2014 in conjunction with the European Dependable Computing Conference (EDCC). We summarize and elaborate on the workshop's discussion of the topic, including both the presented positions and the dialogue that ensued.

  5. “The Safety of Tourist” - Required Community Standard

    Directory of Open Access Journals (Sweden)

    Olguta Ludmila Benescu

    2010-06-01

    be forgotten which would attract tourists.The Romanian State, in order to have had an attractive and profitable tourism it must turn into a leading provider of safety.

  6. Development of national standards related to the integrated safety and security of high-rise buildings

    Science.gov (United States)

    Voskresenskaya, Elena; Vorona-Slivinskaya, Lubov

    2018-03-01

    The article considers the issues of developing national standards for high-rise construction. The system of standards should provide industrial, operational, economic and terrorist safety of high-rise buildings and facilities. Modern standards of high-rise construction should set the rules for designing engineering systems of high-rise buildings, which will ensure the integrated security of buildings, increase their energy efficiency and reduce the consumption of resources in construction and operation.

  7. Development of national standards related to the integrated safety and security of high-rise buildings

    Directory of Open Access Journals (Sweden)

    Voskresenskaya Elena

    2018-01-01

    Full Text Available The article considers the issues of developing national standards for high-rise construction. The system of standards should provide industrial, operational, economic and terrorist safety of high-rise buildings and facilities. Modern standards of high-rise construction should set the rules for designing engineering systems of high-rise buildings, which will ensure the integrated security of buildings, increase their energy efficiency and reduce the consumption of resources in construction and operation.

  8. C. F. Braun. Standard turbine island design, safety analysis report

    International Nuclear Information System (INIS)

    1974-01-01

    A standard turbine island used with a BWR is described. It consists of the turbine-generator; steam system; condensate storage, cleanup, and transfer systems; control and instrumentation; water treatment plant; make-up demineralizer; potable and waste water systems; and a compressed air system. The turbine-generator is a tandem-compound nuclear-type turbine with one double-flow high-pressure section and a six-flow low-pressure section in three double-flow low-pressure casings. The turbine is direct connected to an 1800 rpm synchronous a-c generator. A combined moisture separator and two-stage reheater is provided. The main steam system delivers the steam generated in a BWR to the main turbine stop valves. The condensate system maintains proper water inventory. Protective features prevent loss of the system due to electrical failure of a component and isolates faults to ensure continuity of a power supply from alternate sources. (U.S.)

  9. DS424: A Roadmap for the Implementation of the IAEA Safety Standards

    International Nuclear Information System (INIS)

    Yllera, Javier

    2010-01-01

    Many countries interested in developing nuclear power programmes for the first time need to have experience in using and regulating radioactive source materials. They need to have experience in building and operating large non-nuclear construction projects. Nuclear power has unique attributes and commitments associated with it that other industries do not. Although undertaken as a national endeavour with many national implications, building and operating a nuclear facility also has global implications (financial, political, safety, etc.). DG’s 2008 General Conference speech: “Every country has the right to introduce nuclear power, as well as the responsibility to do it right.”. The development of IAEA Safety Standards is an statutory function of the IAEA (article III of the IAEA Statute): “The Agency is authorized to establish or adopt… standards of safety for protection of health and minimization of danger to life and property…”. New guide (DS 424) constitutes a “Road-map” to apply the entire suite of IAEA Safety Standards progressively during the early phases of the implementation of a nuclear power programme. IAEA safety review missions based on internationally agreed safety standards are well established and are the best tools to build up confidence on the capacity of a country to develop nuclear energy in a safe way

  10. Issues and relationships among software standards for nuclear safety applications. Version 2.0

    International Nuclear Information System (INIS)

    Scott, J.A.; Preckshot, G.G.; Lawrence, J.D.; Johnson, G.L.

    1996-01-01

    Lawrence Livermore National Laboratory is assisting the Nuclear Regulatory Commission with the development of draft regulatory guides for selected software engineering standards. This report describes the results of the initial task in this work. The selected software standards and a set of related software engineering standards were reviewed, and the resulting preliminary elements of the regulatory positions are identified in this report. The importance of a thorough understanding of the relationships among standards useful for developing safety-related software is emphasized. The relationship of this work to the update of the Standard Review Plan is also discussed

  11. Patient safety principles in family medicine residency accreditation standards and curriculum objectives

    Science.gov (United States)

    Kassam, Aliya; Sharma, Nishan; Harvie, Margot; O’Beirne, Maeve; Topps, Maureen

    2016-01-01

    Abstract Objective To conduct a thematic analysis of the College of Family Physicians of Canada’s (CFPC’s) Red Book accreditation standards and the Triple C Competency-based Curriculum objectives with respect to patient safety principles. Design Thematic content analysis of the CFPC’s Red Book accreditation standards and the Triple C curriculum. Setting Canada. Main outcome measures Coding frequency of the patient safety principles (ie, patient engagement; respectful, transparent relationships; complex systems; a just and trusting culture; responsibility and accountability for actions; and continuous learning and improvement) found in the analyzed CFPC documents. Results Within the analyzed CFPC documents, the most commonly found patient safety principle was patient engagement (n = 51 coding references); the least commonly found patient safety principles were a just and trusting culture (n = 5 coding references) and complex systems (n = 5 coding references). Other patient safety principles that were uncommon included responsibility and accountability for actions (n = 7 coding references) and continuous learning and improvement (n = 12 coding references). Conclusion Explicit inclusion of patient safety content such as the use of patient safety principles is needed for residency training programs across Canada to ensure the full spectrum of care is addressed, from community-based care to acute hospital-based care. This will ensure a patient safety culture can be cultivated from residency and sustained into primary care practice. PMID:27965349

  12. MRI/TRUS fusion software-based targeted biopsy: the new standard of care?

    Science.gov (United States)

    Manfredi, M; Costa Moretti, T B; Emberton, M; Villers, A; Valerio, M

    2015-09-01

    The advent of multiparametric MRI has made it possible to change the way in which prostate biopsy is done, allowing to direct biopsies to suspicious lesions rather than randomly. The subject of this review relates to a computer-assisted strategy, the MRI/US fusion software-based targeted biopsy, and to its performance compared to the other sampling methods. Different devices with different methods to register MR images to live TRUS are currently in use to allow software-based targeted biopsy. Main clinical indications of MRI/US fusion software-based targeted biopsy are re-biopsy in men with persistent suspicious of prostate cancer after first negative standard biopsy and the follow-up of patients under active surveillance. Some studies have compared MRI/US fusion software-based targeted versus standard biopsy. In men at risk with MRI-suspicious lesion, targeted biopsy consistently detects more men with clinically significant disease as compared to standard biopsy; some studies have also shown decreased detection of insignificant disease. Only two studies directly compared MRI/US fusion software-based targeted biopsy with MRI/US fusion visual targeted biopsy, and the diagnostic ability seems to be in favor of the software approach. To date, no study comparing software-based targeted biopsy against in-bore MRI biopsy is available. The new software-based targeted approach seems to have the characteristics to be added in the standard pathway for achieving accurate risk stratification. Once reproducibility and cost-effectiveness will be verified, the actual issue will be to determine whether MRI/TRUS fusion software-based targeted biopsy represents anadd-on test or a replacement to standard TRUS biopsy.

  13. Targeted neonatal echocardiography services: need for standardized training and quality assurance.

    LENUS (Irish Health Repository)

    Finan, Emer

    2014-10-01

    Targeted neonatal echocardiography refers to a focused assessment of myocardial performance and hemodynamics directed by a specific clinical question. It has become the standard of care in many parts of the world, but practice is variable, and there has been a lack of standardized training and evaluation to date. Targeted neonatal echocardiography was first introduced to Canada in 2006. The purpose of this study was to examine the characteristics of targeted neonatal echocardiography practice and training methods in Canadian neonatal intensive care units (NICUs).

  14. 41 CFR 102-76.30 - What seismic safety standards must Federal agencies follow in the design and construction of...

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What seismic safety... § 102-76.30 What seismic safety standards must Federal agencies follow in the design and construction of Federal facilities? Federal agencies must follow the seismic safety standards identified in § 102-80.45 of...

  15. New standard on safety for hydrogen systems in spanish. Keys for understanding and use

    Energy Technology Data Exchange (ETDEWEB)

    Luis Aprea, Jose [CNEA, Argentine Atomic Energy Commission - AAH - IRAM - Comahue University, CC 805 - Neuquen (Argentina)

    2008-07-15

    The present paper approaches all the preliminary, normative and additional elements observed during the work carried out by the Argentine standardization board to count in the country with a normative document that covers the expectations of the local community of users and other Spanish-speaking user, about the integral safety for the hydrogen systems. The antecedents and the process of adoption of an international standard and its adaptation to the local media are analyzed. The result has been the Standard IRAM/ISO 15916 that intends to offer, to all the users and especially to those who are not familiar with the technology, a base to understand the subject of safety, thus enhancing the education of the general public in hydrogen safety matters. (author)

  16. Adoption and adaptation of the International Basic Safety Standards to Cuban reality

    International Nuclear Information System (INIS)

    Quevedo Garcia, J.R.; Lopez Forteza, Y.; Sarabia Molina, I.; Alonso Gonzalez, I.; Guillen Campos, A.

    2001-01-01

    The new Cuban regulatory document homologous to the 'International Basic Safety Standards for protection against ionizing radiation and for the safety of radiation sources' (IBSS) will be published in the near future. The document was accomplished on the basis of the IAEA Safety Series No 115 to which text it was performed the needed changes in order adapt it to the national reality in the field of protection and safety. The document is published with the consensus of the principal organizations and entities with specific responsibilities in relation to protection and safety as well as the consensus of the entities providing services in this field. The present paper presents and discusses the basic aspects included in the Cuban document that in one or another way should be considered as precision in reference to the IBSS. (author)

  17. EMPLOYEE PERCEPTIONS OF OCCUPATIONAL HEALTH AND SAFETY STANDARDS IN THE STEEL INDUSTRY

    Directory of Open Access Journals (Sweden)

    J. Mojapelo

    2016-07-01

    Full Text Available The inability to follow occupational health and safety standards typically resultsin accidents that place severe financial burdens on both employees as well asorganisations. The aim of this studyis to explore the perceptionsof employees inthe steel industry towards occupational health and safety standards in the steelindustry in South Africa. A survey was conducted in which a structuredquestionnaire was distributed to a purposive sample of 165 employees employedby a largesteel processing company in Gauteng Province. The collected data wereanalysed using SPSS (Version 22.0. A combination of descriptive statistics andanalysis of mean scores was applied to meet the aim of the study. The resultsreveal that employees in the steel industry perceived that occupational health andsafety standards were satisfactory in all seven occupational health and safetydimensions considered in this study. These are (1 information and training, (2health and safety awareness, (3 employee behaviour (4 role of the supervisor, (5health and safety reporting mechanisms, (6 workplace inspection, and (7workplace environment. Among these dimensions, safety awareness emerged asthe most important dimension to employees. The results may be utilised bymanagers in the steel industry to identify and direct their attention to the keyoccupational health and safety factors in their different contexts.

  18. Standard model for the safety analysis report of nuclear fuel reprocessing plants

    International Nuclear Information System (INIS)

    1980-02-01

    This norm establishes the Standard Model for the Safety Analysis Report of Nuclear Fuel Reprocessing Plants, comprehending the presentation format, the detailing level of the minimum information required by the CNEN for evaluation the requests of Construction License or Operation Authorization, in accordance with the legislation in force. This regulation applies to the following basic reports: Preliminary Safety Analysis Report - PSAR, integrating part of the requirement of Construction License; and Final Safety Analysis Report (FSAR) which is the integrating part of the requirement for Operation Authorization

  19. Compliance with the ANSI Z133.1 - 2006 safety standard among arborists in New England.

    Science.gov (United States)

    Julius, Alex K; Kane, Brian; Bulzacchelli, Maria T; Ryan, H Dennis P

    2014-12-01

    Arboriculture is hazardous work. A consensus safety standard exists, but little is known about compliance with it. This study aimed to determine whether accreditation and certification are associated with safety practices and to identify specific safety practices adhered to most and least. Sixty-three tree care companies in southern New England were directly observed on job sites. Adherence to the American National Standards for Arboricultural Operations (ANSI Z133.1 - 2006) was compared across companies that were accredited, non-accredited with certified arborists on staff, and non-accredited without certified arborists on staff. Companies with accreditation or certified arborists demonstrated greater safety compliance than those without. However, low compliance was found across all company types for personal protective equipment (PPE) use, chain saw safety, and chipper safety. Greater attention to PPE, chain saw, and chipper practices is warranted across the industry. Safety in non-accredited companies without certified arborists especially needs improvement. Only partial compliance was found among accredited companies and companies with certified arborists. Intervention strategies are needed for all company types for the use of PPE and safer use of chain saws and chippers. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. Safety and environmental advantages of using tritium-lean targets for inertial fusion energy

    Energy Technology Data Exchange (ETDEWEB)

    Latkowski, J.F.; Logan, B.G.; Perkins, L.J.; Meier, W.R.; Moir, R.W. [Lawrence Livermore National Lab., CA (United States); Atzeni, S. [Associazione EURATOM-ENEA sulla Fusione, Frascati (Italy); Sanz, J. [Escuela Tecnica Superior de Ingenieros Industriales, Universidad Nacional de Educacion a Distancia and Instituto de Fusion Nuclear, Dept. Ingenieria Energetica, Bilbao (Spain)

    2000-07-01

    While traditional inertial fusion energy target designs typically use equimolar portions of deuterium and tritium and have areal densities ({rho}r) of {approx} 3 g/cm{sup 2}, significant safety and environmental (S and E) advantages may be obtained through the use of high-density ({rho}r {approx} 10 g/cm{sup 2}) targets with tritium components as low as 0.5%. Such targets would absorb much of the neutron energy within the target and could be self-sufficient from a tritium breeding point of view. Tritium self-sufficiency within the target would free target chamber designers from the need to use lithium-bearing blanket materials, while low inventories within each target would translate into low inventories in target fabrication facilities. Absorption of much of the neutron energy within the target, the extremely low tritium inventories, and the greatly moderated neutron spectrum, make 'tritium-lean' targets appear quite attractive from an S and E perspective. (authors)

  1. Criticality Safety Evaluation of Standard Criticality Safety Requirements #1-520 g Operations in PF-4

    Energy Technology Data Exchange (ETDEWEB)

    Yamanaka, Alan Joseph Jr. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-10-13

    Guidance has been requested from the Nuclear Criticality Safety Division (NCSD) regarding processes that involve 520 grams of fissionable material or less. This Level-3 evaluation was conducted and documented in accordance with NCS-AP-004 (Ref. 1), formerly NCS-GUIDE-01. This evaluation is being written as a generic evaluation for all operations that will be able to operate using a 520-gram mass limit. Implementation for specific operations will be performed using a Level 1 CSED, which will confirm and document that this CSED can be used for the specific operation as discussed in NCS-MEMO-17-007 (Ref. 2). This Level 3 CSED updates and supersedes the analysis performed in NCS-TECH-14-014 (Ref. 3).

  2. Cross-index to DOE-prescribed occupational safety codes and standards

    International Nuclear Information System (INIS)

    1982-01-01

    A compilation of detailed information from more than three hundred and fifty DOE-prescribed or OSHA-referenced industrial safety codes and standards is presented. Condensed data from individual code portions are listed according to reference code, section, paragraph and page. A glossary of letter initials/abbreviations for the organizations or documents whose codes or standards are contained in this Cross-Index, is listed

  3. The impact of a standard enforcement safety belt law on fatalities and hospital charges in Ohio.

    Science.gov (United States)

    Conner, Kristen A; Xiang, Huiyun; Smith, Gary A

    2010-02-01

    The purpose of this study was to analyze linked crash and hospital data to determine the effect that enactment of a standard enforcement safety belt law in Ohio would have on hospital charges and direct medical costs due to motor-vehicle crashes, focusing on the impact to the state's Medicaid system. The linkage and analysis was conducted as part of the Ohio Crash Outcome Data Evaluation System (CODES) program. Current safety belt usage in Ohio stands at 82% with its secondary enforcement safety belt law. Assuming an increase in usage to 92% through standard enforcement, over $15.3 million in medical costs to Medicaid for injuries that occur in a single year could be prevented over a 10-year period. Cumulative savings could reach more than $91.2 million during the 10-year period. In addition, 161 fatalities could have been prevented in one year had all unbelted occupants who sustained a fatal injury instead chosen to wear their safety belt. SUMMARY AND IMPACT ON INDUSTRY: Clearly, substantial progress can be made in reducing the number of deaths and injuries, as well as medical costs associated with motor-vehicle crashes, by strengthening safety belt laws and increasing safety belt usage in Ohio. Copyright 2010 Elsevier Ltd. All rights reserved.

  4. Radon in the Workplace: the Occupational Safety and Health Administration (OSHA) Ionizing Radiation Standard.

    Science.gov (United States)

    Lewis, Robert K

    2016-10-01

    On 29 December 1970, the Occupational Safety and Health Act of 1970 established the Occupational Safety and Health Administration (OSHA). This article on OSHA, Title 29, Part 1910.1096 Ionizing Radiation standard was written to increase awareness of the employer, the workforce, state and federal governments, and those in the radon industry who perform radon testing and radon mitigation of the existence of these regulations, particularly the radon relevant aspect of the regulations. This review paper was also written to try to explain what can sometimes be complicated regulations. As the author works within the Radon Division of the Pennsylvania Department of Environmental Protection, Bureau of Radiation Protection, the exclusive focus of the article is on radon. The 1910.1096 standard obviously covers many other aspects of radiation and radiation safety in the work place.

  5. Comparative study of Malaysian and Philippine regulatory infrastructures on radiation and nuclear safety with international standards

    International Nuclear Information System (INIS)

    Cayabo, Lynette B.

    2013-06-01

    This study presents the results of the critical reviews, analysis, and comparison of the regulatory infrastructures for radiation and nuclear safety of Malaysis and the Philippines usi ng the IAEA safety requirements, GSR Part 1, G overnment, Legal and Regulatory Framework for Safety'' as the main basis and in part, the GSR Part 3, R adiation Protection and Safety of Radiation Sources: International Basic Safety Standards . The scope of the comparison includes the elements of the relevant legislations, the regulatory system and processes including the core functions of the regulatory body (authorization, review and assessment, inspection and enforcement, development of regulations and guides); and the staffing and training of regulatory body. The respective availabe data of the Malaysian and Philippine regulatory infrastructures and current practices were gathered and analyzed. Recommendations to fill the gaps and strengthen the existing regulatory infrastructure of each country was given using as bases relevant IAEA safety guides. Based on the analysis made, the main findings are: the legislations of both countries do not contain al the elements of teh national policy and strategy for safety as well as those of teh framework for safety in GR Part I. Among the provision that need to be included in the legislations are: emergency planning and response; decommissioning of facilities safe management of radioactive wastes and spent fuel; competence for safety; and technical sevices. Provisions on coordination of different authorities with safety responsibilities within the regulatory framework for safety as well as liaison with advisory bodies and support organizations need to be enhanced. The Philippines needs to establish an independent regulatory body, ie. separate from organizations charged with promotion of nuclear technologies and responsible for facilitiesand activities. Graded approach on the system of notification and authorization by registration and

  6. Basic safety standards for radiation protection and their application to internal exposures

    International Nuclear Information System (INIS)

    Dousset, M.

    Following a summary of the basic concepts on radiation protection units, the safety standards now in effect in France and those recommended by the International Commission on Radiological Protection (ICRP Publication 9, 1965) to be used as a basis to the next Euratom regulations are developed [fr

  7. 77 FR 32698 - Proposed Extension of Existing Information Collection; Safety Standards for Roof Bolts in Metal...

    Science.gov (United States)

    2012-06-01

    ... provided in the desired format, reporting burden (time and financial resources) is minimized, collection... Extension of Existing Information Collection; Safety Standards for Roof Bolts in Metal and Nonmetal Mines... agencies with an opportunity to comment on proposed and continuing collections of information in accordance...

  8. 29 CFR 5.8 - Liquidated damages under the Contract Work Hours and Safety Standards Act.

    Science.gov (United States)

    2010-07-01

    ... notwithstanding the exercise of due care upon the part of the contractor or subcontractor involved, and the amount... Hours and Safety Standards Act notwithstanding the exercise of due care upon the part of the contractor... recommendations to this effect or a report to the Department of Labor. This delegation of authority is made under...

  9. 76 FR 54802 - Petitions for Modification of Application of Existing Mandatory Safety Standards

    Science.gov (United States)

    2011-09-02

    ... well. The active working place will be kept free from accumulations of coal dust and coal spillage... of any mandatory safety standard to a coal or other mine if the Secretary determines that: (1) An... the placement of at least 200 feet of expanding cement below the base of the lowest mineable coal bed...

  10. 76 FR 53102 - Federal Motor Vehicle Safety Standards; Denial of Petition for Rulemaking; School Buses

    Science.gov (United States)

    2011-08-25

    ... seating positions. Federal Motor Vehicle Safety Standard (FMVSS) No. 222, ``School bus passenger seating..., and requires that passengers on large school buses be protected through a concept called... Identifier Number (RIN) 2127-AK09) (NPRM upgrading school bus passenger crash protection, 72 FR 65509...

  11. Standard model for safety analysis report of hexafluoride power plants from natural uranium

    International Nuclear Information System (INIS)

    1983-01-01

    The standard model for safety analysis report for hexafluoride production power plants from natural uranium is presented, showing the presentation form, the nature and the degree of detail, of the minimal information required by the Brazilian Nuclear Energy Commission - CNEN. (E.G.) [pt

  12. 76 FR 16640 - Petitions for Modification of Existing Mandatory Safety Standards

    Science.gov (United States)

    2011-03-24

    ... and diesel material haulage equipment for underground transportation; (2) Normal mantrip travel time... representative of miners to file a petition to modify the application of any mandatory safety standard to a coal... modification. II. Petitions for Modification Docket Number: M-2010-040-C. Petitioner: Kingston Mining, Inc...

  13. American National Standards Institute ANSI N 43.1 Radiological Safety in the Design and Operation of Particle Accelerators

    International Nuclear Information System (INIS)

    Scott Walker, L.; Liu, J.

    2004-01-01

    The ANSI N43 committee established a writing committee to re-write the ANSI N43.1 accelerator safety standard in 1994. James Liu and Scott Walker were appointed as co-chairman. Compared to the old standard, the new standard is aimed to have a broader application, up-to-date requirements, and recommendations for best practices. The new standard uses a hazard based graded approach to address radiation safety programs for accelerators with various energies, beam currents and applications (excluding medical accelerators which are covered by another standard). Thus, the standard fulfills the goal of the committee to prepare a standard with unlimited application to industrial and research accelerators. The standard is largely complete with chapters as follows: 1) Scope. 2) Definitions. 3) Radiation Safety Program (facility safety program, radiation safety planning, organizational considerations, safety assessment, review and performance evaluation). 4) Radiation Safety System (prompt radiation, safety system features, reliability and fail-safety, tamper resistance, quality control, configuration control, adventitious production of radiation, and induced radioactivity). 5) Personnel Access Control System (including graded approach, postings, barriers, beam inhibiting devices and interlocks). 6) Radiation Control System, (passive shielding, and active systems). 7) Accelerator Operation (including readiness reviews, maintenance and testing, bypasses and deviation from procedure, operating practices, emergencies). 8) Operational Health Physics, and 9) Training. The document also has appendices regarding how to determine the Safety and Operations Envelope, Guidance for Computer Based Access Control Systems, and Radiation Measurements at Accelerators. (Author)

  14. Effects of a Workplace Intervention Targeting Psychosocial Risk Factors on Safety and Health Outcomes.

    Science.gov (United States)

    Hammer, Leslie B; Truxillo, Donald M; Bodner, Todd; Rineer, Jennifer; Pytlovany, Amy C; Richman, Amy

    2015-01-01

    The goal of this study was to test the effectiveness of a workplace intervention targeting work-life stress and safety-related psychosocial risk factors on health and safety outcomes. Data were collected over time using a randomized control trial design with 264 construction workers employed in an urban municipal department. The intervention involved family- and safety-supportive supervisor behavior training (computer-based), followed by two weeks of behavior tracking and a four-hour, facilitated team effectiveness session including supervisors and employees. A significant positive intervention effect was found for an objective measure of blood pressure at the 12-month follow-up. However, no significant intervention results were found for self-reported general health, safety participation, or safety compliance. These findings suggest that an intervention focused on supervisor support training and a team effectiveness process for planning and problem solving should be further refined and utilized in order to improve employee health with additional research on the beneficial effects on worker safety.

  15. Assessment of emergency safety showers against proposed EU and ANSI standards

    Directory of Open Access Journals (Sweden)

    M Burby

    2008-09-01

    Full Text Available This investigation was carried out with the cooperation of a majorinternational safety shower manufacturer, Hughes Safety Showers Ltd. Thefirst part of this study was to characterise various commercial safetyshower heads with regard to their spray patternation, droplet sizes, dropletvelocities and impact forces. The spray patternation of a number of showerhead designs were compared against the proposed EU and AmericanNational Standard institute (ANSI standard for plumbed in body showers.The results of this work showed that a large proportion of the shower headdeigns failed to meet the proposed EU standard. The second part to thisstudy was to determine the efficiency and effectiveness of the emergencysafety shower head designs via a series of decontamination ‘wash-off’tests on a mannequin, with a number of simulated hazardous substancesapplied to its surface.

  16. THE CONFORMITY OF MACHINE TOOLS WITH RESPECT TO EUROPEAN SAFETY STANDARDS

    CERN Multimedia

    TIS/TE

    2000-01-01

    European regulations require that all motorized machine tools conform to the latest safety standards by the end of the year 2000. CERN must follow these regulations and has already modified most of its machine tools accordingly. However, there is still a small number of machine tools which have not yet been modified as required. These machines should not be used until they are brought up to the required safety standards, failing which the machines should be discarded. One can recognise which machine tools conform with the latest standards by the indication 'CS' on the identification plate of the machine, see foto below. In cases of doubt about the status of a machine tool you should contact K. Altherr/EST or C. Margaroli/TIS for advice.

  17. THE CONFORMITY OF MACHINE TOOLS WITH RESPECT TO EUROPEAN SAFETY STANDARDS

    CERN Multimedia

    TIS/TE

    2001-01-01

    European regulations require that all motorized machine tools conform to the latest safety standards by the end of the year 2000. CERN must follow these regulations and has already modified most of its machine tools accordingly. However, there is still a small number of machine tools which have not yet been modified as required. These machines should not be used until they are brought up to the required safety standards, failing which the machines should be discarded. One can recognise which machine tools conform with the latest standards by the indication 'CS' on the identification plate of the machine, see foto below. In cases of doubt about the status of a machine tool you should contact K. Altherr/EST or C. Margaroli/TIS for advice.

  18. The IAEA Promotes the Application of Safety Standards and Best Practices for the Management of Radioactive Waste

    International Nuclear Information System (INIS)

    2014-01-01

    The IAEA works to promote a high level of safety as it facilitates peaceful uses of nuclear energy worldwide. The IAEA’s Statute authorizes it to establish or adopt standards of safety for protection of health and minimization of danger to life and property, and to provide for the application of these standards. The Statute also mandates the IAEA to foster the exchange of scientific and technical information to facilitate the peaceful uses of atomic energy. To this end, the IAEA develops safety standards on different topics, including on the safety of radioactive waste management. These standards, issued in the IAEA Safety Standards Series, reflect an international consensus on what constitutes a high level of safety for protecting people from harmful effects of ionizing radiation and protecting the environment

  19. Arianespace Launch Service Operator Policy for Space Safety (Regulations and Standards for Safety)

    Science.gov (United States)

    Jourdainne, Laurent

    2013-09-01

    Since December 10, 2010, the French Space Act has entered into force. This French Law, referenced as LOS N°2008-518 ("Loi relative aux Opérations Spatiales"), is compliant with international rules. This French Space Act (LOS) is now applicable for any French private company whose business is dealing with rocket launch or in orbit satellites operations. Under CNES leadership, Arianespace contributed to the consolidation of technical regulation applicable to launch service operators.Now for each launch operation, the operator Arianespace has to apply for an authorization to proceed to the French ministry in charge of space activities. In the files issued for this purpose, the operator is able to justify a high level of warranties in the management of risks through robust processes in relation with the qualification maintenance, the configuration management, the treatment of technical facts and relevant conclusions and risks reduction implementation when needed.Thanks to the historic success of Ariane launch systems through its more than 30 years of exploitation experience (54 successes in a row for latest Ariane 5 launches), Arianespace as well as European public and industrial partners developed key experiences and knowledge as well as competences in space security and safety. Soyuz-ST and Vega launch systems are now in operation from Guiana Space Center with identical and proved risks management processes. Already existing processes have been slightly adapted to cope with the new roles and responsibilities of each actor contributing to the launch preparation and additional requirements like potential collision avoidance with inhabited space objects.Up to now, more than 12 Ariane 5 launches and 4 Soyuz-ST launches have been authorized under the French Space Act regulations. Ariane 5 and Soyuz- ST generic demonstration of conformity have been issued, including exhaustive danger and impact studies for each launch system.This article will detail how Arianespace

  20. Design of the EURISOL multi-MW target assembly radiation and safety issues

    CERN Document Server

    Felcini, Marta; Kadi, Yacine; Otto, Thomas; Tecchio, L

    2006-01-01

    The multi-MW target proposed for the EURISOL facility will be based on fission of uranium (or thorium) compounds to produce rare isotopes far from stability. A two-step process is used for the isotope production. First, neutrons are generated in a liquid mercury target, irradiated by the 1 GeV proton or deuteron beam, provided by the EURISOL linac driver. Then, the neutrons induce fission in a surrounding assembly of uranium carbide. R&D projects on several aspects of the target assembly are ongoing. Key criteria for the target design are a maximum beam power capability of 4 MW, a remote handling system with minimum downtime and maximum reliability, as well as radiation safety, minimization of hazards and the classification of the facility. In the framework of the ongoing radiation characterization and safety studies, radiation transport simulations have been performed to calculate the prompt radiation dose in the target and surrounding materials, as well as to determine shielding material and angle-depen...

  1. Design of the EURISOL multi-MW target assembly: radiation and safety issues

    CERN Document Server

    Felcini, M; Kadi, Y; Otto, T; Tecchio, L; Otto, Th.

    2006-01-01

    The multi-MW target proposed for the EURISOL facility will be based on fission of uranium (or thorium) compounds to produce rare isotopes far from stability. A two-step process is used for the isotope production. First, neutrons are generated in a liquid mercury target, irradiated by the 1 GeV proton or deuteron beam, provided by the EURISOL linac driver. Then, the neutrons induce fission in a surrounding assembly of uranium carbide. R&D projects on several aspects of the target assembly are ongoing. Key criteria for the target design are a maximum beam power capability of 4 MW, a remote handling system with minimum downtime and maximum reliability, as well as radiation safety, minimization of hazards and the classification of the facility. In the framework of the ongoing radiation characterization and safety studies, radiation transport simulations have been performed to calculate the prompt radiation dose in the target and surrounding materials, as well as to determine shielding material and angle-depen...

  2. International cooperation, networking and application of IAEA safety standards - Perspectives of the IAEA

    International Nuclear Information System (INIS)

    Viktorsson, C.; Amaral, E.

    2007-01-01

    The fundamental objective of safety is to protect people and the environment from the harmful effects of ionizing radiation arising from the operation of nuclear fuel cycle facilities and the utilization of radiation in general. This protection rests on the availability and international acceptance and use of a complete set of safety standards, strong management for safety of all licensees, effective regulatory bodies and a sustainable infrastructure with professionals trained in the application of the safety standards. The nuclear safety community is faced with many new challenges in the nuclear installations safety and radiation safety areas. The potential for accidents will increase as more and more countries turn to wider application of nuclear power and radiation sources, and if ageing of technology is not managed properly. The complexity of these issues requires the enhancement of the exchange of knowledge and cooperation among all nuclear and radiation professionals. Operators and regulators need to base their decisions on a robust knowledge base supported by institutions where high quality R and D activities are carried out. Institutions tracking new scientific information, new technologies and new challenges in a proactive manner play an important role in this context. The technical, scientific and safety support to operators and regulators differs significantly among countries, but whatever organizational framework has been chosen, international cooperation, networking and technical and scientific information sharing are essential. This conference deals with the challenges faced by technical and scientific support organizations (TSOs) in dealing with the important task of enhancing nuclear and radiation safety. This is indeed a challenge, not only to the TSOs themselves, but also to both the nuclear and the radiation communities. High quality technical and scientific information coming from well recognized, authoritative sources is of prime importance to

  3. Adjustment of the Brazilian radioprotection standards to the safety principles of the International Atomic Energy Agency

    International Nuclear Information System (INIS)

    Pereira, Wagner de S.; Py Junior, Delcy de A.

    2013-01-01

    The International Atomic Energy Agency (IAEA) has a recommendation with 10 basic safety principles (Fundamental Safety Principles Safety Fundamentals series, number SF-1), which are: 1) Responsibility for safety; 2) Role for government; 3) Leadership and management for safety; 4) Justification of facilities and activities; 5) Optimization of protection; 6) Limitation of risk to individuals; 7) Protection of present and futures generations; 8) Prevention of accidents; 9) Emergency preparedness and response and 10) Protection actions to reduce existing or unregulated radiations risk. The aim of this study is to verify that the Brazilian standards of radiation protection meet the principles described above and how well suited to them. The analysis of the national radiation protection regulatory system, developed and deployed by the National Nuclear Energy Commission (CNEN), showed that out of the ten items, two are covered partially, the number 2 and 10. The others are fully met. The item 2 the fact that the regulatory body (CNEN) be stock controller of a large company in the sector put in check its independence as a regulatory body. In item 10 the Brazilian standard of radiation protection does not provide explicit resolution of environmental liabilities

  4. Evaluation Standard for Safety Coefficient of Roller Compacted Concrete Dam Based on Finite Element Method

    Directory of Open Access Journals (Sweden)

    Bo Li

    2014-01-01

    Full Text Available The lack of evaluation standard for safety coefficient based on finite element method (FEM limits the wide application of FEM in roller compacted concrete dam (RCCD. In this paper, the strength reserve factor (SRF method is adopted to simulate gradual failure and possible unstable modes of RCCD system. The entropy theory and catastrophe theory are used to obtain the ultimate bearing resistance and failure criterion of the RCCD. The most dangerous sliding plane for RCCD failure is found using the Latin hypercube sampling (LHS and auxiliary analysis of partial least squares regression (PLSR. Finally a method for determining the evaluation standard of RCCD safety coefficient based on FEM is put forward using least squares support vector machines (LSSVM and particle swarm optimization (PSO. The proposed method is applied to safety coefficient analysis of the Longtan RCCD in China. The calculation shows that RCCD failure is closely related to RCCD interface strength, and the Longtan RCCD is safe in the design condition. Considering RCCD failure characteristic and combining the advantages of several excellent algorithms, the proposed method determines the evaluation standard for safety coefficient of RCCD based on FEM for the first time and can be popularized to any RCCD.

  5. Hydrodynamic and symmetry safety factors of HiPER's targets

    Energy Technology Data Exchange (ETDEWEB)

    Hallo, L; Olazabal-Loume, M; Ribeyre, X; Drean, V; Schurtz, G; Feugeas, J-L; Breil, J; Nicolai, Ph; Maire, P-H [CELIA, Universite Bordeaux 1, 351 cours de La Liberation, 33405 Talence (France)], E-mail: hallo@celia.u-bordeaux1.fr

    2009-01-15

    Hydrodynamics and robustness of three high yield targets within the HiPER project are presented. Using realistic illumination nonuniformity configuration, hydrodynamic perturbations sensitivity analysis is carried out. A rather simple hydrodynamic perturbation modeling sequence is validated thanks to 2D simulations. 1D simulations post-processed with such a modeling sequence provide a good estimation of the thermonuclear burn. First estimates of hydrodynamic safety factor are given.

  6. Standardized System of Nuclear Safety Information for the Promotion of Transparency and Openness

    International Nuclear Information System (INIS)

    Lee, Gihyung; Kim, Sanghyun; Lee, Gyehwi; Yoon, Yeonhwa; Song, Song Hyerim; Jeong, Jina; Byun, Jaehyung; Seo, Jonghwan

    2013-01-01

    There has been an increasing emphasis on the need for increased disclosure of information through the home page of the Korea Institute of Nuclear Safety (KINS), responsible for nuclear safety regulations, and the Nuclear Safety Information Center (NSIC) to enhance public understanding of nuclear safety. However, due to the dazzled structure of the existing KINS and NSIC home pages, improvements in accessibility and convenience are necessary. At the same time, content standardization is required to increase operational efficiency and provide coherent information. In this study, the Delphi method was used to select the major contents to make available on the home page as well as the main user base definition for the home page layout development. Also, internal and external expert groups were created to conduct AHP (Analytic Hierarchy Process) analysis and develop the comparative analysis items for the U. S. Nuclear Regulatory Commission(NRC)/KINS/NSIC home pages. Afterwards, problems and points of improvements for the home page system, design, and profile were derived using heuristic analysis. The implications arising from the Delphi analysis results were applied to the home page layout. In the nuclear safety information standardized system construction process, the comparative analysis conducted using the AHP and heuristic analyses of the NRC home page resulted in deriving improvements for the Guidance, Organization, and Trustworthy items of the KINS/NSIC home page. Furthermore, through the Delphi analysis, a clear purpose and core values were set for the KINS web site, and the needs of the main user base were identified. By developing the home page layout, user interest and utility were raised to improve the organization method and layout. Through this study, KINS was able to construct a nuclear safety information standardized system and increase transparency and openness by providing feature enhancements in information provision as well as user accessibility and

  7. Measurement and standardization of eye safety for optical radiation of LED products

    Science.gov (United States)

    Mou, Tongsheng; Peng, Zhenjian

    2013-06-01

    The blue light hazard (BLH) to human eye's retina is now a new issue emerging in applications of artificial light sources. Especially for solid state lighting sources based on the blue chip-LED(GaN), the photons with their energy more than 2.4 eV show photochemical effects on the retina significantly, raising damage both in photoreceptors and retinal pigment epithelium. The photobiological safety of artificial light sources emitting optical radiation has gained more and more attention worldwide and addressed by international standards IEC 62471-2006(CIE S009/E: 2002). Meanwhile, it is involved in IEC safety specifications of LED lighting products and covered by European Directive 2006/25/EC on the minimum health and safety requirements regarding the exposure of the workers to artificial optical radiation. In practical applications of the safety standards, the measuring methods of optical radiation from LED products to eyes are important in establishment of executable methods in the industry. In 2011, a new project to develop the international standard of IEC TR62471-4,that is "Measuring methods of optical radiation related to photobiological safety", was approved and are now under way. This paper presents the concerned methods for the assessment of optical radiation hazards in the standards. Furthermore, a retina radiance meter simulating eye's optical geometry is also described, which is a potential tool for blue light hazard assessment of retinal exposure to optical radiation. The spectroradiometric method integrated with charge-coupled device(CCD) imaging system is introduced to provide more reliable results.

  8. Common basis of establishing safety standards and other safety decision-making levels for different sources of health risk

    International Nuclear Information System (INIS)

    Demin, V.F.

    2002-01-01

    Current approaches in establishing safety standards and other decision-making levels for different sources of health risk are critically analysed. To have a common basis for this decision-making a specific risk index R is recommended. In the common sense R is quantitatively defined as LLE caused by the annual exposure to the risk source considered: R = annual exposure, damage (LLE) from the exposure unit. This common definition is also rewritten in specific forms for a set of different risk sources (ionising radiation, chemical pollutants, etc): for different risk sources the exposure can be measured with different quantities (the probability of death, the exposure dose, etc.). R is relative LLE: LLE in years referred to 1 year under the risk. The dimension of this value is [year/year]. In the statistical sense R is conditionally the share of the year, which is lost due to exposure to a risk source during this year. In this sense R can be called as the relative damage. Really lifetime years are lost after the exposure. R can be in some conditional sense considered as a dimensionless quantity. General safety standards R n for the public and occupational workers have been suggested in terms of this index: R n = 0.0007 and 0.01 accordingly. Secondary safety standards are derived for a number of risk sources (ionising radiation, environmental chemical pollutants, etc). Values of R n are chosen in such a way that to have the secondary radiation BSS being equivalent to the current one's. Other general and derived levels for safety decision-making are also proposed including the de-minimus levels. Their possible dependence on the national or regional health-demographic data (HDD) is considered. Such issues as the ways of the integration and averaging of risk indices considered through the national or regional HDD for different risk sources and the use of non-threshold linear exposure - response relationships for ionising radiation and chemical pollutants are analysed

  9. Integrated protection model: ISO 45001 as a future of safety and health standards

    Directory of Open Access Journals (Sweden)

    Živković Snežana

    2015-01-01

    Full Text Available Along with the increase in awareness of the importance of human resources and their contribution to the value of the organization, there is a growing awareness of the need for their management. The fact that modern society prescribes by the law that organizations must identify dangers and hazards, risk level that may arise, as well as their management and implementation of consistent measures to reduce their impact, shows the importance that is attributed to this issue. For the effective implementation of laws in the field of health and safety at work and other necessary protective measures, there has been a need for a systematic approach to management in this area. Systematic approach to management in the field of health and safety at work ensures the implementation of all measures necessary for the safe operation thus protecting both employees and organization. This systematic approach is reflected in the current standard OHSAS 18001, which aims to establish control over the risks that carry harmful potentials, and thus ensuring the continuity of operation of the organization. The focus of the scientific community which is actively working on improving the existing standards in the field of safety and health of employees is focused on the upcoming standard that will replace OHSAS 18001. The upcoming standard places a greater emphasis on the risk management and the ongoing assessment of risks and opportunities to prevent or reduce side effects. The innovations in this standard are reflected in the strengthening of the role of top management and top management as well as in the context of the 'organization' itself. ISO 45001 provides for active participation of management in all processes of health and safety at work and tends to reduce the usage of process of delegated responsibility to one manager, while, on the other hand, the organization looks at the broader, i.e., the requirements of the wider community are taken into account.

  10. A probabilistic safety assessment of the standard French 900MWe pressurized water reactor. Main report

    International Nuclear Information System (INIS)

    1990-04-01

    To situate the probabilistic safety assessment of standardized 900 MWe units made by the Institute for Nuclear Safety and Protection (IPSN), it is necessary to consider the importance and possible utilization of a study of this type. At the present time, the safety of nuclear installations essentially depends on the application of the defence in-depth approach. The design arrangements adopted are justified by the operating organization on the basis of deterministic studies of a limited number of conventional situations with corresponding safety margins. These conventional situations are grouped in categories by frequency, it being accepted that the greater the consequences the lesser the frequency must be. However in the framework of the analysis performed under the control of the French safety authority, the importance was rapidly recognized of setting an overall reference objective. By 1977, on the occasion of appraisal of the fundamental safety options of the standardized 1300 MWe units, the Central Service for the Safety of Nuclear Installations (SCSIN) set the following global probabilistic objective: 'Generally speaking, the design of installations including a pressurized water nuclear reactor must be such that the global probability of the nuclear unit being the origin of unacceptable consequences does not exceed 10 -6 per year...' Probabilistic analyses making reference to this global objective gradually began to supplement the deterministic approach, both for examining external hazards to be considered in the design basis and for examining the possible need for additional means of countering the failure of doubled systems in application of the deterministic single-failure criterion. A new step has been taken in France by carrying out two level 1 probabilistic safety assessments (calculation of the annual probability of core meltdown), one for the 900 MWe series by the IPSN and the other for the 1300 MWe series by Electricite de France. The objective of

  11. 48 CFR 852.222-70 - Contract Work Hours and Safety Standards Act-nursing home care contract supplement.

    Science.gov (United States)

    2010-10-01

    ... Safety Standards Act-nursing home care contract supplement. 852.222-70 Section 852.222-70 Federal...—nursing home care contract supplement. As prescribed in 822.305, for nursing home care requirements, insert the following clause: Contract Work Hours and Safety Standards Act—Nursing Home Care Contract...

  12. 20 CFR 667.274 - What health and safety standards apply to the working conditions of participants in activities...

    Science.gov (United States)

    2010-04-01

    ... WIA? (a) Health and safety standards established under Federal and State law otherwise applicable to... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What health and safety standards apply to the... I OF THE WORKFORCE INVESTMENT ACT Administrative Rules, Costs and Limitations § 667.274 What health...

  13. Road safety risk evaluation and target setting using data envelopment analysis and its extensions.

    Science.gov (United States)

    Shen, Yongjun; Hermans, Elke; Brijs, Tom; Wets, Geert; Vanhoof, Koen

    2012-09-01

    Currently, comparison between countries in terms of their road safety performance is widely conducted in order to better understand one's own safety situation and to learn from those best-performing countries by indicating practical targets and formulating action programmes. In this respect, crash data such as the number of road fatalities and casualties are mostly investigated. However, the absolute numbers are not directly comparable between countries. Therefore, the concept of risk, which is defined as the ratio of road safety outcomes and some measure of exposure (e.g., the population size, the number of registered vehicles, or distance travelled), is often used in the context of benchmarking. Nevertheless, these risk indicators are not consistent in most cases. In other words, countries may have different evaluation results or ranking positions using different exposure information. In this study, data envelopment analysis (DEA) as a performance measurement technique is investigated to provide an overall perspective on a country's road safety situation, and further assess whether the road safety outcomes registered in a country correspond to the numbers that can be expected based on the level of exposure. In doing so, three model extensions are considered, which are the DEA based road safety model (DEA-RS), the cross-efficiency method, and the categorical DEA model. Using the measures of exposure to risk as the model's input and the number of road fatalities as output, an overall road safety efficiency score is computed for the 27 European Union (EU) countries based on the DEA-RS model, and the ranking of countries in accordance with their cross-efficiency scores is evaluated. Furthermore, after applying clustering analysis to group countries with inherent similarity in their practices, the categorical DEA-RS model is adopted to identify best-performing and underperforming countries in each cluster, as well as the reference sets or benchmarks for those

  14. Improving health, safety and energy efficiency in New Zealand through measuring and applying basic housing standards.

    Science.gov (United States)

    Gillespie-Bennett, Julie; Keall, Michael; Howden-Chapman, Philippa; Baker, Michael G

    2013-08-02

    Substandard housing is a problem in New Zealand. Historically there has been little recognition of the important aspects of housing quality that affect people's health and safety. In this viewpoint article we outline the importance of assessing these factors as an essential step to improving the health and safety of New Zealanders and household energy efficiency. A practical risk assessment tool adapted to New Zealand conditions, the Healthy Housing Index (HHI), measures the physical characteristics of houses that affect the health and safety of the occupants. This instrument is also the only tool that has been validated against health and safety outcomes and reported in the international peer-reviewed literature. The HHI provides a framework on which a housing warrant of fitness (WOF) can be based. The HHI inspection takes about one hour to conduct and is performed by a trained building inspector. To maximise the effectiveness of this housing quality assessment we envisage the output having two parts. The first would be a pass/fail WOF assessment showing whether or not the house meets basic health, safety and energy efficiency standards. The second component would rate each main assessment area (health, safety and energy efficiency), potentially on a five-point scale. This WOF system would establish a good minimum standard for rental accommodation as well encouraging improved housing performance over time. In this article we argue that the HHI is an important, validated, housing assessment tool that will improve housing quality, leading to better health of the occupants, reduced home injuries, and greater energy efficiency. If required, this tool could be extended to also cover resilience to natural hazards, broader aspects of sustainability, and the suitability of the dwelling for occupants with particular needs.

  15. Performance Measurement and Target-Setting in California's Safety Net Health Systems.

    Science.gov (United States)

    Hemmat, Shirin; Schillinger, Dean; Lyles, Courtney; Ackerman, Sara; Gourley, Gato; Vittinghoff, Eric; Handley, Margaret; Sarkar, Urmimala

    Health policies encourage implementing quality measurement with performance targets. The 2010-2015 California Medicaid waiver mandated quality measurement and reporting. In 2013, California safety net hospitals participating in the waiver set a voluntary performance target (the 90th percentile for Medicare preferred provider organization plans) for mammography screening and cholesterol control in diabetes. They did not reach the target, and the difference-in-differences analysis suggested that there was no difference for mammography ( P = .39) and low-density lipoprotein control ( P = .11) performance compared to measures for which no statewide quality improvement initiative existed. California's Medicaid waiver was associated with improved performance on a number of metrics, but this performance was not attributable to target setting on specific health conditions. Performance may have improved because of secular trends or systems improvements related to waiver funding. Relying on condition-specific targets to measure performance may underestimate improvements and disadvantage certain health systems. Achieving ambitious targets likely requires sustained fiscal, management, and workforce investments.

  16. Preliminary Safety Information Document for the Standard MHTGR. Volume 1, (includes latest Amendments)

    Energy Technology Data Exchange (ETDEWEB)

    None

    1986-01-01

    With NRC concurrence, the Licensing Plan for the Standard HTGR describes an application program consistent with 10CFR50, Appendix O to support a US Nuclear Regulatory Commission (NRC) review and design certification of an advanced Standard modular High Temperature Gas-Cooled Reactor (MHTGR) design. Consistent with the NRC's Advanced Reactor Policy, the Plan also outlines a series of preapplication activities which have as an objective the early issuance of an NRC Licensability Statement on the Standard MHTGR conceptual design. This Preliminary Safety Information Document (PSID) has been prepared as one of the submittals to the NRC by the US Department of Energy in support of preapplication activities on the Standard MHTGR. Other submittals to be provided include a Probabilistic Risk Assessment, a Regulatory Technology Development Plan, and an Emergency Planning Bases Report.

  17. Edible safety requirements and assessment standards for agricultural genetically modified organisms.

    Science.gov (United States)

    Deng, Pingjian; Zhou, Xiangyang; Zhou, Peng; Du, Zhong; Hou, Hongli; Yang, Dongyan; Tan, Jianjun; Wu, Xiaojin; Zhang, Jinzhou; Yang, Yongcun; Liu, Jin; Liu, Guihua; Li, Yonghong; Liu, Jianjun; Yu, Lei; Fang, Shisong; Yang, Xiaoke

    2008-05-01

    This paper describes the background, principles, concepts and methods of framing the technical regulation for edible safety requirement and assessment of agricultural genetically modified organisms (agri-GMOs) for Shenzhen Special Economic Zone in the People's Republic of China. It provides a set of systematic criteria for edible safety requirements and the assessment process for agri-GMOs. First, focusing on the degree of risk and impact of different agri-GMOs, we developed hazard grades for toxicity, allergenicity, anti-nutrition effects, and unintended effects and standards for the impact type of genetic manipulation. Second, for assessing edible safety, we developed indexes and standards for different hazard grades of recipient organisms, for the influence of types of genetic manipulation and hazard grades of agri-GMOs. To evaluate the applicability of these criteria and their congruency with other safety assessment systems for GMOs applied by related organizations all over the world, we selected some agri-GMOs (soybean, maize, potato, capsicum and yeast) as cases to put through our new assessment system, and compared our results with the previous assessments. It turned out that the result of each of the cases was congruent with the original assessment.

  18. Is it time to reassess current safety standards for glyphosate-based herbicides?

    Science.gov (United States)

    Vandenberg, Laura N; Blumberg, Bruce; Antoniou, Michael N; Benbrook, Charles M; Carroll, Lynn; Colborn, Theo; Everett, Lorne G; Hansen, Michael; Landrigan, Philip J; Lanphear, Bruce P; Mesnage, Robin; Vom Saal, Frederick S; Welshons, Wade V; Myers, John Peterson

    2017-06-01

    Use of glyphosate-based herbicides (GBHs) increased ∼100-fold from 1974 to 2014. Additional increases are expected due to widespread emergence of glyphosate-resistant weeds, increased application of GBHs, and preharvest uses of GBHs as desiccants. Current safety assessments rely heavily on studies conducted over 30 years ago. We have considered information on GBH use, exposures, mechanisms of action, toxicity and epidemiology. Human exposures to glyphosate are rising, and a number of in vitro and in vivo studies challenge the basis for the current safety assessment of glyphosate and GBHs. We conclude that current safety standards for GBHs are outdated and may fail to protect public health or the environment. To improve safety standards, the following are urgently needed: (1) human biomonitoring for glyphosate and its metabolites; (2) prioritisation of glyphosate and GBHs for hazard assessments, including toxicological studies that use state-of-the-art approaches; (3) epidemiological studies, especially of occupationally exposed agricultural workers, pregnant women and their children and (4) evaluations of GBHs in commercially used formulations, recognising that herbicide mixtures likely have effects that are not predicted by studying glyphosate alone. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  19. Guideline adherence to chemotherapy administration safety standards: a survey on nurses in a single institute

    OpenAIRE

    Kim, Kidong; Lee, Hee Sook; Kim, Younha; Kim, Beob-Jong; Kim, Moon-Hong; Choi, Seok-Cheol; Ryu, Sang-Young

    2011-01-01

    Objective Little is known about the guideline adherence of nurses to chemotherapy administration guidelines. We determined the guideline adherence of nurses to the Chemotherapy Administration Safety Standards and the relationship between demographic characteristics and guideline adherence. Methods Survey sheets containing two questions on demographic characteristics and 16 questions on the guideline adherence of nurses regarding chemotherapy administration were distributed to all in-patient d...

  20. Education and training requirements in the revised European Basic Safety Standards Directive

    International Nuclear Information System (INIS)

    Mundigl, S.

    2009-01-01

    The European Commission is currently developing a modified European Basic Safety Standards Directive covering two major objectives: the consolidation of existing European Radiation Protection legislation, and the revision of the European Basic Safety Standards. The consolidation will merge the following five Directives into one single Directive: the Basic Safety Standards Directive, the Medical Exposures Directive, the Public Information Directive, the Outside Workers Directive, and the Directive on the Control of high-activity sealed radioactive sources and orphan sources. The revision of the European Basic Safety Standards will take account of the latest recommendations by the International Commission on Radiological Protection (ICRP) and shall improve clarity of the requirements where appropriate. It is planned to introduce more binding requirements on natural radiation sources, on criteria for clearance, and on the cooperation between Member States for emergency planning and response, as well as a graded approach for regulatory control. One additional goal is to achieve greater harmonisation between the European BSS and the international BSS. Following a recommendation from the Article 31 Group of Experts, the current draft of the modified BSS will highlight the importance of education and training by dedicating a specific title to radiation protection education, training and information. This title will include a general requirement on the Member States to ensure the establishment of an adequate legislative and administrative framework for providing appropriate radiation protection education, training and information. In addition, there will be specific requirements on training in the medical field, on information and training of workers in general, of workers potentially exposed to orphan sources, and to emergency workers. The revised BSS directive will include requirements on the competence of a radiation protection expert (RPE) and of a radiation protection

  1. Wilderness Education Association certification and safety, ecological impact, and curriculum standardization of graduates

    OpenAIRE

    Detzel, David

    1985-01-01

    Graduates of the Wilderness Education Association (W.E.A.) were surveyed by mail to investigate the effects of their certification on safety, ecological impact, and curriculum standardization of their subsequent leadership activities. Self-reports showed a slight, but not statistically significant, decrease in the number of post- W.E.A. course evacuations and rescues. Graduates reported a moderate W.E.A. influence on their accident records, and knowledge of W.E.A. stan...

  2. OIE philosophy, policy and procedures for the development of food safety standards.

    Science.gov (United States)

    Droppers, W F G L

    2006-08-01

    Food safety was identified as a high priority area in the 2001-2005 World Organisation for Animal Health (OIE) Strategic Plan. Member Countries of the OIE considered that the organisation should be more active in issues of public health and consumer protection and that this should include more involvement in the area of diseases or pathogens transmissible through food, whether or not animals are affected by such diseases or pathogens. A permanent Working Group on Animal Production Food Safety was established in 2002 to coordinate the OIE's activities in food safety. The Working Group was requested to focus on food safety measures applicable at farm level and to monitor the ongoing cooperation between the OIE and Codex Alimentarius. More emphasis is now placed on the public health aspects of a disease when OIE standards are developed or revised. For example, the revised chapter on bovine tuberculosis in the Terrestrial Animal Health Code includes food safety recommendations for meat and meat products and for milk and milk products. The revised chapter was approved by the OIE International Committee of Member Countries at their 73rd General Session in May 2005. More chapters will follow, beginning with a chapter addressing bovine brucellosis.

  3. Appraisal for Japan of the safety of transport of radioactive material. Provision for the application of the IAEA safety standards

    International Nuclear Information System (INIS)

    2006-01-01

    The IAEA's Statute authorizes it to provide for the application of its standards at the request of any State. The objective of a TranSAS appraisal is to assist any requesting State to achieve a high level of safety in the transport of radioactive material by reviewing its implementation of the Transport Regulations and by making recommendations for improvement where appropriate.The IAEA discharges this statutory function through a number of mechanisms, including rendering independent peer review appraisal services to determine the status of compliance with its standards. The appraisal for Japan in December 2005 on the safety of the transport of radioactive material is the seventh TranSAS mission since the inception of the service. This report presents its findings. The TranSAS appraisal team completed a comprehensive appraisal of the implementation of the Transport Regulations in Japan. The cooperation of the authorities in Japan, and of all those who participated in the discussions, was excellent and contributed to the success of the appraisal. The comprehensive legal framework, with responsibilities identified in considerable detail and with clear lines of authority to minimize overlap of responsibilities, provides a sound basis for the implementation of the Transport Regulations. Generally, the Transport Regulations are implemented in accordance with IAEA requirements. Some areas for possible improvement have been identified. These areas relate mainly to reduction of regulations, quality management systems, training, compliance assurance and lessening the administrative burden for incorporating amendments to the IMDG Code. The findings include a considerable number of good practices, in particular in the area of maritime transport

  4. Overview of IAEA safety standards and insights from regulatory review services

    International Nuclear Information System (INIS)

    Guo, L.

    2007-01-01

    This presentation will discuss the transparency and openness which are covered by the topics of this workshop. Safety and protection issues have been taken into consideration on an international level. The IAEA affirmed the importance of safety in its statute more than 40 years ago and has been working ever since towards international harmonization of safety and radiation protection principles. All nuclear technologies are recommended to meet minimum standards of nuclear safety set at the international level by the IAEA. Up to now, transparency and openness which become more and more important for the regulatory bodies to improve their regulatory effectiveness and efficiency are not clearly defined in a systematic way in the IAEA safety standards, but, there are still several documents which give some requirements and suggestions to address this important issues. First part of my presentation will present the overviews of transparency and openness described in the IAEA safety standards, including legal-binding and non-legal-binding instruments. From top to low level of standards hierarchy, like new Fundamentals, Basic Safety Standards (BSS), General requirements for the regulatory authorities (GS-R-1), INSAG documents, as well as the Technical Document which deals with the communication practices. It should he noted that GS-R-1 is the basis for IRRS. Its revision already started and we are going to incorporate clear statements regarding Transparency and Openness followed the statements by new Fundamentals. Transparency and openness issues is considered to be more important part of the Policy Issue in new Integrated Regulatory Review Services (IRRS) being carried out in the member states. The regulatory policy issues review provides a greater understanding of the regulatory issues that may have international policy implications and will assist in addressing specific technical issues relevant to the regulation of nuclear safety and radiation protection. The

  5. Developing legally defensible physiological employment standards for prominent physically demanding public safety occupations: a Canadian perspective.

    Science.gov (United States)

    Jamnik, V; Gumienak, R; Gledhill, N

    2013-10-01

    Canadian court decisions and human rights legislation impose strict legal criteria for developing applicant and incumbent physiological employment standards to qualify as a bona fide occupational requirement. These legal criteria compel researchers and employers to ensure that the standards are criterion-based and validly linked to the critical life threatening physically demanding tasks of the occupation, and this has led to the establishment of a systematic research process template to ensure this connection. Validation of job-related physiological employment standards is achieved using both construct and content procedures and reliability is established via test-retest procedures. The 1999 Supreme Court of Canada Meiorin Decision also obliges employers to demonstrate that it is impossible to accommodate an individual applicant or employee who is adversely impacted by lowering the physiological employment standards without imposing undue hardship on the employer. Recent evidence has demonstrated convincingly that familiarization opportunities, motivational feedback/coaching during test performance, and participation in a 6-week job-specific physical fitness training program can overcome the adverse impact of a physiological employment standards on a sub-group of participants, thereby providing "de facto" accommodation. In this article, the authors review the physiological employment standards for prominent Canadian physically demanding public safety occupations; police, correctional officers, nuclear emergency personnel, structural fire fighters, and wildland fire fighters, to illustrate the steps, challenges, and solutions involved in developing and implementing physiological employment standards designed to meet the requirements to qualify as a bona fide occupational requirement.

  6. Evaluation of a non-targeted "Omic"' approach in the safety assessment of genetically modified plants

    DEFF Research Database (Denmark)

    Metzdorff, Stine Broeng; Kok, E. J.; Knuthsen, Pia

    2006-01-01

    Genetically modified plants must be approved before release in the European Union, and the approval is generally based upon a comparison of various characteristics between the transgenic plant and a conventional counterpart. As a case study, focusing on safety assessment of genetically modified......-time PCR, and High Performance Liquid Chromatography. Analysis by cDNA microarray was used as a non-targeted approach for the identification of potential unintended effects caused by the transformation. The results revealed that, although the transgenic lines possessed different types of integration events...... has the potential to become a useful tool for screening of unintended effects, but state that it is crucial to have substantial information on the natural variation in traditional crops in order to be able to interpret "ornics" data correctly within the framework of food safety assessment strategies...

  7. Key elements on implementing an occupational health and safety management system using ISO 45001 standard

    Directory of Open Access Journals (Sweden)

    Darabont Doru Costin

    2017-01-01

    Full Text Available Occupational health and safety (OHS management system is one of the main elements of the company’s general management system. During last decade, Romanian companies gained a valuable experience on implementing this type of management systems, using OHSAS 18001 referential and standard. However, the projected release of the ISO 45001 represents a new approach which requires the companies to take in consideration new key elements for a successful implementation of the OHS management system. The aim of the paper is to identify and analyse these key elements, by integration of the following issues: standard requirements, Romanian OHS legislation and good practice examples, including the general control measures for new and emerging risks such as psycho-social risks, workforce ageing and new technologies. The study results represent an important work instrument for each company interested to implement or upgrade its OHS management system using ISO 45001 standard and could be used regardless the company size or activity domain.

  8. Harnessing implementation science to improve care quality and patient safety: a systematic review of targeted literature.

    Science.gov (United States)

    Braithwaite, Jeffrey; Marks, Danielle; Taylor, Natalie

    2014-06-01

    Getting greater levels of evidence into practice is a key problem for health systems, compounded by the volume of research produced. Implementation science aims to improve the adoption and spread of research evidence. A linked problem is how to enhance quality of care and patient safety based on evidence when care settings are complex adaptive systems. Our research question was: according to the implementation science literature, which common implementation factors are associated with improving the quality and safety of care for patients? We conducted a targeted search of key journals to examine implementation science in the quality and safety domain applying PRISMA procedures. Fifty-seven out of 466 references retrieved were considered relevant following the application of exclusion criteria. Included articles were subjected to content analysis. Three reviewers extracted and documented key characteristics of the papers. Grounded theory was used to distil key features of the literature to derive emergent success factors. Eight success factors of implementation emerged: preparing for change, capacity for implementation-people, capacity for implementation-setting, types of implementation, resources, leverage, desirable implementation enabling features, and sustainability. Obstacles in implementation are the mirror image of these: for example, when people fail to prepare, have insufficient capacity for implementation or when the setting is resistant to change, then care quality is at risk, and patient safety can be compromised. This review of key studies in the quality and safety literature discusses the current state-of-play of implementation science applied to these domains. © The Author 2014. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

  9. Organizational-Economic Aspects of the Implementation of International Standards for Safety of Maritime Navigation

    Directory of Open Access Journals (Sweden)

    Poznanska Inna V.

    2016-08-01

    Full Text Available The aim of the article is to study issues and problems of the implementation of new safety standards for international maritime navigation. The causes of the need for establishment of an international institution that will ensure control over the safety of merchant shipping by the port state have been studied. There has been defined the principles of work and organizational mechanism for port state control provided by the Paris Memorandum of Understanding in general and the Black Sea Memorandum in particular. The basic criteria for the ranking of the flag state in accordance with the condition of vessels registered in them, by the degree of their correspondence to the requirements of safe navigation have been identified. The basic criteria for inspections of compliance with the Memorandum of Understanding and those most commonly applied in international navigation and inspections of Ukrainian shipping companies have been determined. The necessity of creating conditions for Ukrainian ship owners to promote the modernization of vessels with respect to safety of the environment and paying special attention to compliance of the conditions of work and rest of seafarers with international standards has been justified.

  10. A Study on the Improvement of Safety Testing Standards and Methods for Mammography

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Seon Hyeong; Jung, Ah Young; Yong, Hwan Seok; Kim, Do Wan; Jang, Gi Won; Cha, Sang Hoon [Korean Institute for Accreditation of Medical Imaging, Seoul (Korea, Republic of); Jo, Sang Won [Dept. of Radiology, Kangbuk Samsung Hospital, Sungkyunkwan University School of Medicine, Seoul (Korea, Republic of); Park, Ji Koon [Industry-Academic Cooperation Foundation, International University of Korea, Jinju (Korea, Republic of)

    2012-11-15

    To establish the improved national safety testing standards and methods for mammography. We investigated and compared the current status of mammographic equipment installation with the national and international safety and quality control programs and methods. We established and verified the draft for safety testing standards and methods. We propose that the investigations of the conductor system, hardware leakage radiation profile, illumination intensity test, comparison between X-ray and light photon exposure, X-ray dose exposure on the chest wall, compression equipment size, timing equipment, and the average effective radiation dose, should all be maintained as they are in the present state without any changes. However, the exposure radiation dose reproducibility, kVp and mAs, and the half value layer tests should be reconsidered and revised. Moreover, compression pressure and autonomic exposure control system (AEC) tests should be included as new criteria. Other parameter controls included in the phantom image analysis which overlap with total quality assurance should be excluded. We recommend that AEC and compression pressure tests should be included as new criteria and the methods for the exposure radiation dose reproducibility, kVp, and mAs, and half value layer tests should be reconsidered and revised.

  11. Safety and efficacy of dual-axis rotational coronary angiography vs. standard coronary angiography.

    Science.gov (United States)

    Klein, Andrew J; Garcia, Joel A; Hudson, Paul A; Kim, Michael S; Messenger, John C; Casserly, Ivan P; Wink, Onno; Hattler, Brack; Tsai, Thomas T; Chen, S Y James; Hansgen, Adam; Carroll, John D

    2011-05-01

    To determine the safety and efficacy of dual-axis rotational coronary angiography (DARCA) by directly comparing it to standard coronary angiography (SA). Standard coronary angiography (SA) requires numerous fixed static images of the coronary tree and has multiple well-documented limitations. Dual-axis rotational coronary angiography (DARCA) is a new rotational acquisition technique that entails simultaneous LAO/RAO and cranial/caudal gantry movement. This technological advancement obtains numerous unique images of the left or right coronary tree with a single coronary injection. We sought to assess the safety and efficacy of DARCA as well as determine DARCA's adequacy for CAD screening and assessment. Thirty patients underwent SA following by DARCA. Contrast volume, radiation dose (DAP) and procedural time were recorded for each method to assess safety. For DARCA acquisitions, blood pressure (BP), heart rate (HR), symptoms and any arrhythmias were recorded. All angiograms were reviewed for CAD screening adequacy by two independent invasive cardiologists. Compared to SA, use of DARCA was associated with a 51% reduction in contrast, 35% less radiation exposure, and 18% shorter procedural time. Both independent reviewers noted DARCA to be at least equivalent to SA with respect to the ability to screen for CAD. DARCA represents a new angiographic technique which is equivalent in terms of image quality and is associated with less contrast use, radiation exposure, and procedural time than SA. Copyright © 2011 Wiley-Liss, Inc.

  12. Reliability study: digital engineered safety feature actuation system of Korean Standard Nuclear Power Plant

    International Nuclear Information System (INIS)

    Sudarno; Kang, H. G.; Jang, S. C.; Eom, H. S.; Ha, J. J.

    2003-04-01

    The usage of digital Instrumentation and Control (I and C) in a nuclear power plant becomes more extensive, including safety related systems. The PSA application of these new designs are very important in order to evaluate their reliability. In particular, Korean Standard Nuclear Power Plants (KSNPPs), typically Ulchin 5 and 6 (UCN 5 and 6) reactor units, adopted the digital safety-critical systems such as Digital Plant Protection System (DPPS) and Digital Engineered Safety Feature Actuation System (DESFAS). In this research, we developed fault tree models for assessing the unavailability of the DESFAS functions. We also performed an analysis of the quantification results. The unavailability results of different DESFAS functions showed that their values are comprised from 5.461E-5 to 3.14E-4. The system unavailability of DESFAS AFAS-1 is estimated as 5.461E-5, which is about 27% less than that of analog system if we consider the difference of human failure probability estimation between both analyses. The results of this study could be utilized in risk-effect analysis of KSNPP. We expect that the safety analysis result will contribute to design feedback

  13. Standard review plan for reviewing safety analysis reports for dry metallic spent fuel storage casks

    International Nuclear Information System (INIS)

    1988-01-01

    The Cask Standard Review Plan (CSRP) has been prepared as guidance to be used in the review of Cask Safety Analysis Reports (CSARs) for storage packages. The principal purpose of the CSRP is to assure the quality and uniformity of storage cask reviews and to present a well-defined base from which to evaluate proposed changes in the scope and requirements of reviews. The CSRP also sets forth solutions and approaches determined to be acceptable in the past by the NRC staff in dealing with a specific safety issue or safety-related design area. These solutions and approaches are presented in this form so that reviewers can take consistent and well-understood positions as the same safety issues arise in future cases. An applicant submitting a CSAR does not have to follow the solutions or approaches presented in the CSRP. However, applicants should recognize that the NRC staff has spent substantial time and effort in reviewing and developing their positions for the issues. A corresponding amount of time and effort will probably be required to review and accept new or different solutions and approaches

  14. Liberal Versus Conventional Glucose Targets in Critically Ill Diabetic Patients: An Exploratory Safety Cohort Assessment.

    Science.gov (United States)

    Di Muzio, Francesca; Presello, Barbara; Glassford, Neil J; Tsuji, Isabela Y; Eastwood, Glenn M; Deane, Adam M; Ekinci, Elif I; Bellomo, Rinaldo; Mårtensson, Johan

    2016-09-01

    To assess the feasibility, safety, and impact on relative hypoglycemia of liberal versus conventional blood glucose concentration targets in critically ill diabetic patients. Prospective, open-label, sequential-period exploratory study. A 22-bed multidisciplinary ICU of a tertiary care hospital in Australia. Eighty adult diabetic patients, 40 from the conventional before period and 40 from the liberal after period. Blood glucose concentration targets were 6-10 mmol/L during the before period and 10-14 mmol/L during the after period. We used admission glycated hemoglobin to estimate premorbid baseline blood glucose concentration. We defined glycemic distance as the difference between blood glucose concentration in ICU and baseline blood glucose concentration. During the first 48 ICU hours, we recorded absolute (blood glucose concentration, 30% below baseline) hypoglycemia rates, insulin administration, and outcomes. The groups had similar baseline characteristics. We observed a negative glycemic distance in 248 of 488 blood glucose concentrations (50.8%) during the before period and 164 of 485 (33.8%) during the after period (p < 0.001). We detected relative hypoglycemia in 20 (50.0%) and nine (22.5%) patients in the before and after periods, respectively (p = 0.01). On day 1, 50.0% and 16.7% received insulin in the before and after periods (p = 0.007). ICU and hospital length of stay and mortality were similar between groups. In a safety cohort of critically ill diabetic patients, a blood glucose concentration target of 10-14 mmol/L resulted in fewer episodes of negative glycemic distance or relative hypoglycemia and reduced insulin administration compared with a target of 6-10 mmol/L.

  15. Establishment and application of medication error classification standards in nursing care based on the International Classification of Patient Safety

    Directory of Open Access Journals (Sweden)

    Xiao-Ping Zhu

    2014-09-01

    Conclusion: Application of this classification system will help nursing administrators to accurately detect system- and process-related defects leading to medication errors, and enable the factors to be targeted to improve the level of patient safety management.

  16. Proposals for the Radioactive Substances (Basic Safety Standards) (England and Wales) Regulations 2000 and the Radioactive Substances (Basic Safety Standards) (England and Wales) Direction 2000. Consultative document

    International Nuclear Information System (INIS)

    2000-01-01

    This document contains proposals for changes to the Radioactive Substances Act 1993 (RSA 93) and proposals for a Direction to be given to the Environment Agency in order to implement aspects of the European Directive 96/29/Euratom concerned with the control of radioactive waste. The Directive lays down basic safety standards for the protection of the health of workers and the general public against the dangers arising from ionising radiation. With the Government pledged to making government more accessible and responsive, an important feature of this approach is effective consultation with all interested organisations. This leads to more realistic and robust proposals, which is particularly important when dealing with proposed legislation. In March this year, the Government published a consultation paper 'The Radioactive Substances Act 1993: Implementing the Revised Basic Safety Standards Directive Euratom 96/29.' This sought comments on the basic principles for change - including the setting of levels of radioactivity below which radioactive material should be considered outside the framework of regulatory control. This document forms the second stage of the consultation process with the aim of gathering views on the proposed legal instruments to implement the Directive. This document: explains the background to the proposed regulations (paragraphs 8-13); summarises the results of the consultation on principles (paragraphs 14-24); describes the proposed changes (paragraphs 25-36); includes draft Regulations (paragraphs 27-29); includes a draft Direction to the Environment Agency (paragraphs 30-36); describes the next steps (paragraphs 37-39); includes a draft Regulatory Impact Assessment (paragraphs 40-41). In general, the devolved administrations in Scotland, Wales and Northern Ireland have assumed responsibility for environmental issues and hence management of radioactive waste policies and legislation affecting their respective countries. However, this

  17. Safety in construction--a comprehensive description of the characteristics of high safety standards in construction work, from the combined perspective of supervisors and experienced workers.

    Science.gov (United States)

    Törner, Marianne; Pousette, Anders

    2009-01-01

    The often applied engineering approach to safety management in the construction industry needs to be supplemented by organizational measures and measures based on how people conceive and react to their social environment. This requires in-depth knowledge of the broad preconditions for high safety standards in construction. The aim of the study was to comprehensively describe the preconditions and components of high safety standards in the construction industry from the perspective of both experienced construction workers and first-line managers. Five worker safety representatives and 19 first-line managers were interviewed, all strategically selected from within a large Swedish construction project. Phenomenographic methodology was used for data acquisition and analysis and to categorize the information. Nine informants verified the results. The study identified four main categories of work safety preconditions and components: (1) Project characteristics and nature of the work, which set the limits of safety management; (2) Organization and structures, with the subcategories planning, work roles, procedures, and resources; (3) Collective values, norms, and behaviors, with the subcategories climate and culture, and interaction and cooperation; and (4) Individual competence and attitudes, with the subcategories knowledge, ability and experience, and individual attitudes. The results comprehensively describe high safety standards in construction, incorporating organizational, group, individual, and technical aspects. High-quality interaction between different organizational functions and hierarchical levels stood out as important aspects of safety. The results are discussed in relation to previous research into safety and into the social-psychological preconditions for other desired outcomes in occupational settings. The results can guide construction companies in planning and executing construction projects to a high safety standard.

  18. DOE standard: Integration of environment, safety, and health into facility disposition activities. Volume 2: Appendices

    International Nuclear Information System (INIS)

    1998-05-01

    This volume contains the appendices that provide additional environment, safety, and health (ES and H) information to complement Volume 1 of this Standard. Appendix A provides a set of candidate DOE ES and H directives and external regulations, organized by hazard types that may be used to identify potentially applicable directives to a specific facility disposition activity. Appendix B offers examples and lessons learned that illustrate implementation of ES and H approaches discussed in Section 3 of Volume 1. Appendix C contains ISMS performance expectations to guide a project team in developing and implementing an effective ISMS and in developing specific performance criteria for use in facility disposition. Appendix D provides guidance for identifying potential Applicable or Relevant and Appropriate Requirements (ARARs) when decommissioning facilities fall under the Comprehensive Environmental Response, Compensation, Liability Act (CERCLA) process. Appendix E discusses ES and H considerations for dispositioning facilities by privatization. Appendix F is an overview of the WSS process. Appendix G provides a copy of two DOE Office of Nuclear Safety Policy and Standards memoranda that form the bases for some of the guidance discussed within the Standard. Appendix H gives information on available hazard analysis techniques and references. Appendix I provides a supplemental discussion to Sections 3.3.4, Hazard Baseline Documentation, and 3.3.6, Environmental Permits. Appendix J presents a sample readiness evaluation checklist

  19. Long-term safety profile of belimumab plus standard therapy in patients with systemic lupus erythematosus.

    Science.gov (United States)

    Merrill, Joan T; Ginzler, Ellen M; Wallace, Daniel J; McKay, James D; Lisse, Jeffrey R; Aranow, Cynthia; Wellborne, Frank R; Burnette, Michael; Condemi, John; Zhong, Z John; Pineda, Lilia; Klein, Jerry; Freimuth, William W

    2012-10-01

    To evaluate the safety profile of long-term belimumab therapy combined with standard therapy for systemic lupus erythematosus (SLE) in patients with active disease. Patients who were randomized to receive intravenous placebo or belimumab 1, 4, or 10 mg/kg, plus standard therapy, and completed the initial 52-week double-blind treatment period were then allowed to enter a 24-week open-label extension phase. During the extension period, patients in the belimumab group either received the same dose or were switched to 10 mg/kg and patients in the placebo group were switched to belimumab 10 mg/kg. Patients who achieved a satisfactory response during the 24-week extension period were allowed to participate in the long-term continuation study of monthly belimumab 10 mg/kg. Adverse events (AEs) and abnormal laboratory results were analyzed per 100 patient-years in 1-year intervals. Of the 364 patients who completed the 52-week double-blind treatment period, 345 entered the 24-week extension, and 296 continued treatment with belimumab in the long-term continuation study. Safety data through 4 years of belimumab exposure (1,165 cumulative patient-years) are reported. Incidence rates of AEs, severe/serious AEs, infusion reactions, infections, malignancies, grades 3/4 laboratory abnormalities, and discontinuations due to AEs were stable or declined during 4-year belimumab exposure. The most common AEs included arthralgia, upper respiratory tract infection, headache, fatigue, and nausea. Serious infusion reactions were rare: only 1 occurred during the 4-year followup period. Rates of serious infection decreased from 5.9/100 patient-years to 3.4/100 patient-years, and no specific type of infection predominated. Belimumab added to standard therapy was generally well-tolerated over the 4-year treatment period in patients with SLE, which suggests that belimumab can be administered long term with an acceptable safety profile. Copyright © 2012 by the American College of Rheumatology.

  20. Standard Review Plan for the review of safety analysis reports for nuclear power plants: LWR edition

    International Nuclear Information System (INIS)

    1987-06-01

    The Standard Review Plan (SRP) is prepared for the guidance of staff reviewers in the Office of Nuclear Reactor Regulation in performing safety reviews of applications to construct or operate nuclear power plants. The principal purpose of the SRP is to assure the quality and uniformity of staff reviews and to present a well-defined base from which to evaluate proposed changes in the scope and requirements of reviews. It is also a purpose of the SRP to make information about regulatory matters widely available and to improve communication and understanding of the staff review process by interested members of the public and the nuclear power industry. The safety review is primarily based on the information provided by an applicant in a Safety Analysis Report (SAR). The SAR must be sufficiently detailed to permit the staff to determine whether the plant can be built and operated without undue risk to the health and safety of the public. The SAR is the principal document in which the applicant provides the information needed to understand the basis upon which this conclusion has been reached. The individual SRP sections address, in detail, who performs the review, the matters that are reviewed, the basis for review, how the review is accomplished, and the conclusions that are sought. The safety review is performed by 25 primary branches. One of the objectives of the SRP is to assign the review responsibilities to the various branches and to define the sometimes complex interfaces between them. Each SRP section identifies the branch that has the primary review responsibility for that section. In some review areas the primary branch may require support, and the branches that are assigned these secondary review responsibilities are also identified for each SRP section

  1. Molecular indexing enables quantitative targeted RNA sequencing and reveals poor efficiencies in standard library preparations.

    Science.gov (United States)

    Fu, Glenn K; Xu, Weihong; Wilhelmy, Julie; Mindrinos, Michael N; Davis, Ronald W; Xiao, Wenzhong; Fodor, Stephen P A

    2014-02-04

    We present a simple molecular indexing method for quantitative targeted RNA sequencing, in which mRNAs of interest are selectively captured from complex cDNA libraries and sequenced to determine their absolute concentrations. cDNA fragments are individually labeled so that each molecule can be tracked from the original sample through the library preparation and sequencing process. Multiple copies of cDNA fragments of identical sequence become distinct through labeling, and replicate clones created during PCR amplification steps can be identified and assigned to their distinct parent molecules. Selective capture enables efficient use of sequencing for deep sampling and for the absolute quantitation of rare or transient transcripts that would otherwise escape detection by standard sequencing methods. We have also constructed a set of synthetic barcoded RNA molecules, which can be introduced as controls into the sample preparation mix and used to monitor the efficiency of library construction. The quantitative targeted sequencing revealed extremely low efficiency in standard library preparations, which were further confirmed by using synthetic barcoded RNA molecules. This finding shows that standard library preparation methods result in the loss of rare transcripts and highlights the need for monitoring library efficiency and for developing more efficient sample preparation methods.

  2. Thermal safety analysis of a dry storage cask for the Korean standard spent fuel - 16159

    International Nuclear Information System (INIS)

    Cha, Jeonghun; Kim, S.N.; Choi, K.W.

    2009-01-01

    A conceptual dry storage facility, which is based on a commercial dry storage facility, was designed for the Korea standard spent nuclear fuel (SNF) and preliminary thermal safety analysis was performed in this study. To perform the preliminary thermal analysis, a thermal analysis method was proposed. The thermal analysis method consists of 2 parts. By using the method, the surface temperature of the storage canister corresponding to the SNF clad temperature was calculated and the adequate air duct area was decided using the calculation result. The initial temperature of the facility was calculated and the fire condition and half air duct blockage were analyzed. (authors)

  3. Postgraduate educational course in radiation protection and the safety of radiation sources. Standard syllabus

    International Nuclear Information System (INIS)

    2004-01-01

    The aim of the Postgraduate Educational Course in Radiation Protection and the Safety of Radiation Sources is to meet the needs of professionals at graduate level, or the equivalent, for initial training to acquire a sound basis in radiation protection and the safety of radiation sources. The course also aims to provide the necessary basic tools for those who will become trainers in radiation protection and in the safe use of radiation sources in their countries. It is designed to provide both theoretical and practical training in the multidisciplinary scientific and/or technical bases of international recommendations and standards on radiation protection and their implementation. The participants should have had a formal education to a level equivalent to a university degree in the physical, chemical or life sciences or engineering and should have been selected to work in the field of radiation protection and the safe use of radiation sources in their countries. The present revision of the Standard Syllabus takes into account the requirements of the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS), IAEA Safety Series No. 115 (1996) and recommendations of related Safety Guides, as well as experience gained from the Postgraduate Educational Course on Radiation Protection and Safety of Radiation Sources held in several regions in recent years. The general aim of the course, as mentioned, is the same. Some of the improvements in the present version are as follows: The learning objective of each part is specified. The prerequisites for each part are specified. The structure of the syllabus has been changed: the parts on Principles of Radiation Protection and on Regulatory Control were moved ahead of Dose Assessment and after Biological Effects of Radiation. The part on the interface with nuclear safety was dropped and a module on radiation protection in nuclear power plants has been included. A

  4. Postgraduate educational course in radiation protection and the safety of radiation sources. Standard syllabus

    International Nuclear Information System (INIS)

    2003-01-01

    The aim of the Postgraduate Educational Course in Radiation Protection and the Safety of Radiation Sources is to meet the needs of professionals at graduate level, or the equivalent, for initial training to acquire a sound basis in radiation protection and the safety of radiation sources. The course also aims to provide the necessary basic tools for those who will become trainers in radiation protection and in the safe use of radiation sources in their countries. It is designed to provide both theoretical and practical training in the multidisciplinary scientific and/or technical bases of international recommendations and standards on radiation protection and their implementation. The participants should have had a formal education to a level equivalent to a university degree in the physical, chemical or life sciences or engineering and should have been selected to work in the field of radiation protection and the safe use of radiation sources in their countries. The present revision of the Standard Syllabus takes into account the requirements of the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS), IAEA Safety Series No. 115 (1996) and recommendations of related Safety Guides, as well as experience gained from the Postgraduate Educational Course on Radiation Protection and Safety of Radiation Sources held in several regions in recent years. The general aim of the course, as mentioned, is the same. Some of the improvements in the present version are as follows: The learning objective of each part is specified. The prerequisites for each part are specified. The structure of the syllabus has been changed: the parts on Principles of Radiation Protection and on Regulatory Control were moved ahead of Dose Assessment and after Biological Effects of Radiation. The part on the interface with nuclear safety was dropped and a module on radiation protection in nuclear power plants has been included. A

  5. Postgraduate educational course in radiation protection and the safety of radiation sources. Standard syllabus

    International Nuclear Information System (INIS)

    2002-01-01

    The aim of the Postgraduate Educational Course in Radiation Protection and the Safety of Radiation Sources is to meet the needs of professionals at graduate level, or the equivalent, for initial training to acquire a sound basis in radiation protection and the safety of radiation sources. The course also aims to provide the necessary basic tools for those who will become trainers in radiation protection and in the safe use of radiation sources in their countries. It is designed to provide both theoretical and practical training in the multidisciplinary scientific and/or technical bases of international recommendations and standards on radiation protection and their implementation. The participants should have had a formal education to a level equivalent to a university degree in the physical, chemical or life sciences or engineering and should have been selected to work in the field of radiation protection and the safe use of radiation sources in their countries. The present revision of the Standard Syllabus takes into account the requirements of the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS), IAEA Safety Series No. 115 (1996) and recommendations of related Safety Guides, as well as experience gained from the Postgraduate Educational Course on Radiation Protection and Safety of Radiation Sources held in several regions in recent years. The general aim of the course, as mentioned, is the same. Some of the improvements in the present version are as follows: The learning objective of each part is specified. The prerequisites for each part are specified. The structure of the syllabus has been changed: the parts on Principles of Radiation Protection and on Regulatory Control were moved ahead of Dose Assessment and after Biological Effects of Radiation. The part on the interface with nuclear safety was dropped and a module on radiation protection in nuclear power plants has been included. A

  6. Summary of component reliability data for probabilistic safety analysis of Korean standard nuclear power plant

    International Nuclear Information System (INIS)

    Choi, S. Y.; Han, S. H.

    2004-01-01

    The reliability data of Korean NPP that reflects the plant specific characteristics is necessary for PSA of Korean nuclear power plants. We have performed a study to develop the component reliability DB and S/W for component reliability analysis. Based on the system, we had have collected the component operation data and failure/repair data during plant operation data to 1998/2000 for YGN 3,4/UCN 3,4 respectively. Recently, we have upgraded the database by collecting additional data by 2002 for Korean standard nuclear power plants and performed component reliability analysis and Bayesian analysis again. In this paper, we supply the summary of component reliability data for probabilistic safety analysis of Korean standard nuclear power plant and describe the plant specific characteristics compared to the generic data

  7. Does compliance to patient safety tasks improve and sustain when radiotherapy treatment processes are standardized?

    Science.gov (United States)

    Simons, Pascale A M; Houben, Ruud; Benders, Jos; Pijls-Johannesma, Madelon; Vandijck, Dominique; Marneffe, Wim; Backes, Huub; Groothuis, Siebren

    2014-10-01

    To realize safe radiotherapy treatment, processes must be stabilized. Standard operating procedures (SOP's) were expected to stabilize the treatment process and perceived task importance would increase sustainability in compliance. This paper presents the effects on compliance to safety related tasks of a process redesign based on lean principles. Compliance to patient safety tasks was measured by video recording of actual radiation treatment, before (T0), directly after (T1) and 1.5 years after (T2) a process redesign. Additionally, technologists were surveyed on perceived task importance and reported incidents were collected for three half-year periods between 2007 and 2009. Compliance to four out of eleven tasks increased at T1, of which improvements on three sustained (T2). Perceived importance of tasks strongly correlated (0.82) to compliance rates at T2. The two tasks, perceived as least important, presented low base-line compliance, improved (T1), but relapsed at T2. The reported near misses (patient-level not reached) on accelerators increased (P improvements sustained after 1.5 years, indicating increased stability. Perceived importance of tasks correlated positively to compliance and sustainability. Raising the perception of task importance is thus crucial to increase compliance. The redesign resulted in increased willingness to report incidents, creating opportunities for patient safety improvement in radiotherapy treatment. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Fundamental challenging problems for developing new nuclear safety standard computer codes

    International Nuclear Information System (INIS)

    Wong, P.K.; Wong, A.E.; Wong, A.

    2005-01-01

    Based on the claims of the US Basic patents number 5,084,232; 5,848,377 and 6,430,516 that can be obtained from typing the Patent Numbers into the Box of the Web site http://164.195.100.11/netahtml/srchnum.htm and their associated published technical papers having been presented and published at International Conferences in the last three years and that all these had been sent into US-NRC by E-mail on March 26, 2003 at 2:46 PM., three fundamental challenging problems for developing new nuclear safety standard computer codes had been presented at the US-NRC RIC2003 Session W4. 2:15-3:15 PM. at the Washington D.C. Capital Hilton Hotel, Presidential Ballroom on April 16, 2003 in front of more than 800 nuclear professionals from many countries worldwide. The objective and scope of this paper is to invite all nuclear professionals to examine and evaluate all the current computer codes being used in their own countries by means of comparison of numerical data from these three specific openly challenging fundamental problems in order to set up a global safety standard for all nuclear power plants in the world. (authors)

  9. Cross-Index to DOE-prescribed industrial safety codes and standards

    International Nuclear Information System (INIS)

    1980-01-01

    This Cross-Index volume is the 1980 compilation of detailed information from more than two hundred and ninety Department of Energy (DOE) prescribed or Occupational Health and Safety Administration (OSHA) referenced industrial safety codes and standards. The compilation of this material was conceived and initiated in 1973, and is revised yearly to provide information from current codes. Condensed data from individual code portions are listed according to reference code, section, paragraph, and page. Each code is given a two-digit reference code number or letter in the Contents section. This reference code provides ready identification of any code listed in the Cross-Index. The computerized information listings are on the left-hand portion of Cross-Index page; in order to the right of the listing are the reference code letters or numbers, the section, paragraph, and page of the referenced code containing expanded information on the individual listing. Simplified How to Use directions are listed. A glossary of letter initials/abbreviations for the organizations or documents, whose codes or standards are contained in this Cross-Index, is included

  10. Targeting International Food Aid Programmes: The Case of Productive Safety Net Programme in Tigray, Ethiopia

    Directory of Open Access Journals (Sweden)

    Hossein Azadi

    2017-09-01

    Full Text Available Ethiopia has experienced more than five major droughts in the past three decades, leading to high dependency on international food aids. Nevertheless, studies indicate that asset depletion has not been prevented; neither did food insecurity diminish. Since 2004/5, the Productive Safety Net Programme (PSNP has been implemented to improve food security in Tigray, Northern Ethiopia. Critics point out that the implementation of food aid programmes can have negative impacts as well as positive outcomes for local communities. Accordingly, this survey study aimed to analyse the distribution and allocation of food aids in the Productive Safety Net Programme (PSNP in Tigray. Results of 479 interviews revealed that targeting different households in the PSNP has been considerably linked to socio-demographic attributes among which age and size of family were decisive factors to receive food aids. Furthermore, older households with smaller family size received more direct support. Inequality between genders was another major finding of this study. When combined with the marital status, there was also a big difference in the percentage of married or unmarried women receiving food aids. These findings could provide fundamental information for policy intervention to correct food security programmes at household level and reduce hunger. Given that, socio-demographic factors can help to identify particular and usually different requirements, vulnerabilities and coping strategies of the members of the food aid programme, so that they can be much more addressed when an emergency happens.

  11. Safety assessment of liver-targeted hydrodynamic gene delivery in dogs.

    Directory of Open Access Journals (Sweden)

    Kenya Kamimura

    Full Text Available Evidence in support of safety of a gene delivery procedure is essential toward gene therapy. Previous studies using the hydrodynamics-based procedure primarily focus on gene delivery efficiency or gene function analysis in mice. The current study focuses on an assessment of the safety of computer-controlled and liver-targeted hydrodynamic gene delivery in dogs as the first step toward hydrodynamic gene therapy in clinic. We demonstrate that the impacts of the hydrodynamic procedure were limited in the injected region and the influences were transient. Histological examination and the hepatic microcirculation measurement using reflectance spectrophotometry reveal that the liver-specific impact of the procedure involves a transient expansion of the liver sinusoids. No systemic damage or toxicity was observed. Physiological parameters, including electrocardiogram, heart rate, blood pressure, oxygen saturation, and body temperature, remained in normal ranges during and after hydrodynamic injection. Body weight was also examined to assess the long-term effects of the procedure in animals who underwent 3 hydrodynamic injections in 6 weeks with 2-week time interval in between. Serum biochemistry analysis showed a transient increase in liver enzymes and a few cytokines upon injection. These results demonstrate that image-guided, liver-specific hydrodynamic gene delivery is safe.

  12. Inspection of radiation sources and regulatory enforcement (supplement to IAEA Safety Standards Series No. GS-G-1.5)

    International Nuclear Information System (INIS)

    2010-08-01

    The achievement and maintenance of a high level of safety in the use of radiation sources depends on there being a sound legal and governmental infrastructure, including a national regulatory body with well-defined responsibilities and functions. These responsibilities and functions include establishing and implementing a system for carrying out regulatory inspections, and taking necessary enforcement actions. The Safety Requirements publication entitled Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety establishes the requirements for legal and governmental infrastructure. The term 'infrastructure' refers to the underlying structure of systems and organizations. This includes requirements concerning the establishment of a regulatory body for radiation sources and the responsibilities and functions assigned to it. The International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (the Basic Safety Standards or the BSS) establish basic requirements for protection against risks associated with exposure to ionizing radiation and for the safety of radiation sources. The application of the BSS is based on the presumption that national infrastructures are in place to enable governments to discharge their responsibilities to for radiation protection and safety. This TECDOC provides practical guidance on the processes for carrying out regulatory inspections and taking enforcement actions. It includes information on the development and use of procedures and standard review plans (i.e. checklists) for inspection. Specific procedures for inspection of radiation practices and sources are provided in the Appendices

  13. Inspection of radiation sources and regulatory enforcement (supplement to IAEA Safety Standards Series No. GS-G-1.5)

    International Nuclear Information System (INIS)

    2007-04-01

    The achievement and maintenance of a high level of safety in the use of radiation sources depends on there being a sound legal and governmental infrastructure, including a national regulatory body with well-defined responsibilities and functions. These responsibilities and functions include establishing and implementing a system for carrying out regulatory inspections, and taking necessary enforcement actions. The Safety Requirements publication entitled Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety establishes the requirements for legal and governmental infrastructure. The term 'infrastructure' refers to the underlying structure of systems and organizations. This includes requirements concerning the establishment of a regulatory body for radiation sources and the responsibilities and functions assigned to it. The International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (the Basic Safety Standards or the BSS) establish basic requirements for protection against risks associated with exposure to ionizing radiation and for the safety of radiation sources. The application of the BSS is based on the presumption that national infrastructures are in place to enable governments to discharge their responsibilities to for radiation protection and safety. This TECDOC provides practical guidance on the processes for carrying out regulatory inspections and taking enforcement actions. It includes information on the development and use of procedures and standard review plans (i.e. checklists) for inspection. Specific procedures for inspection of radiation practices and sources are provided in the Appendices

  14. Evaluation of information in nanomaterial safety data sheets and development of international standard for guidance on preparation of nanomaterial safety data sheets.

    Science.gov (United States)

    Lee, Ji Hyun; Kuk, Won Kwen; Kwon, Miran; Lee, Jong Han; Lee, Kwon Sub; Yu, Il Je

    2013-05-01

    Safety data sheets (SDSs) and labelling are the basic hazard communication tools for hazardous chemicals as regards their manufacture, storage, transport and other handling activities. Thus, in the context of the growing use of nanomaterials and nanomaterial-containing materials, this study evaluated the information provided in 97 nanomaterial-related SDSs according to the criteria set by the GHS (Globally Harmonized System of Classification and Labelling of Chemicals) and found that most of the SDSs did not include sufficient information on the safety of nanomaterials, such as their toxicity and physicochemical properties. The reasons for this lack of information in the nanomaterial SDSs can mainly be attributed to (1) a lack of toxicity and physicochemical property information on nanomaterials, (2) unawareness of the effectiveness of conventional exposure controls, such as local exhaust ventilation and encapsulation, and personal protective equipment (PPE), in protecting against nanomaterial exposure, (3) a lack of information on emergency and firefighting measures and (4) a lack of knowledge on how existing regulations apply to nanomaterials. Therefore, to create a consistent standard for the information provided on safety, health and environmental matters for manufactured nanomaterial-containing products, guidance for the preparation of nanomaterial-specific SDSs, including both nanomaterials and mixtures of nanomaterials with conventional non-nanoscale materials, was recently initiated by the ISO TC 229. Their guidance, in the form of a technical report, recommends that nanomaterial-related SDSs should be prepared based on a precautionary approach in terms of the toxicity and other risks associated with the nanomaterial contents within the mixture in question. One of the key recommendations in the technical report is to include additional physicochemical properties, including the particle size (average and range), size distribution aggregation

  15. Targeting clinician concerns about exposure therapy: A pilot study comparing standard vs. enhanced training.

    Science.gov (United States)

    Farrell, Nicholas R; Kemp, Joshua J; Blakey, Shannon M; Meyer, Johanna M; Deacon, Brett J

    2016-10-01

    Owing to concerns about the safety and tolerability of exposure therapy, many clinicians deliver the treatment in an overly cautious manner, which may limit its effectiveness. Although didactic training in exposure reduces clinician concerns about the treatment to a moderate extent, improved training strategies are needed to minimize these concerns and improve exposure delivery. The present study compared the effectiveness of a standard (i.e., didactic) exposure therapy training model to an "enhanced" training paradigm encompassing strategies derived from social-cognitive theory on attitude change. Clinicians (N = 49) were assigned to one of the two training approaches. Relative to standard training, clinicians who received enhanced training showed: (a) significantly greater reductions in concerns about exposure from pre- to post-training, and (b) superior self-reported delivery of the treatment. Reduction in concerns during training mediated the effects of training condition on clinicians' self-reported exposure delivery. These findings underscore the importance of addressing clinician concerns about exposure therapy in training contexts. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. New pricing approaches for bundled payments: Leveraging clinical standards and regional variations to target avoidable utilization.

    Science.gov (United States)

    Hellsten, Erik; Chu, Scally; Crump, R Trafford; Yu, Kevin; Sutherland, Jason M

    2016-03-01

    Develop pricing models for bundled payments that draw inputs from clinician-defined best practice standards and benchmarks set from regional variations in utilization. Health care utilization and claims data for a cohort of incident Ontario ischemic and hemorrhagic stroke episodes. Episodes of care are created by linking incident stroke hospitalizations with subsequent health service utilization across multiple datasets. Costs are estimated for episodes of care and constituent service components using setting-specific case mix methodologies and provincial fee schedules. Costs are estimated for five areas of potentially avoidable utilization, derived from best practice standards set by an expert panel of stroke clinicians. Alternative approaches for setting normative prices for stroke episodes are developed using measures of potentially avoidable utilization and benchmarks established by the best performing regions. There are wide regional variations in the utilization of different health services within episodes of stroke care. Reconciling the best practice standards with regional utilization identifies significant amounts of potentially avoidable utilization. Normative pricing models for stroke episodes result in increasingly aggressive redistributions of funding. Bundled payment pilots to date have been based on the costs of historical service patterns, which effectively 'bake in' unwarranted and inefficient variations in utilization. This study demonstrates the feasibility of novel clinically informed episode pricing approaches that leverage these variations to target reductions in potentially avoidable utilization. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  17. BRAF plus MEK-targeted drugs: a new standard of treatment for BRAF-mutant advanced melanoma.

    Science.gov (United States)

    Queirolo, Paola; Spagnolo, Francesco

    2017-03-01

    BRAF plus MEK-targeted drugs have out-performed BRAF inhibitor monotherapy in three randomized phase 3 studies, and such combinations have become a new standard of treatment for BRAF-mutant advanced melanoma. With an overall response rate of about 70%, no other therapy in melanoma has shown a better response rate in late-phase clinical trials than combined BRAF and MEK inhibitors; the rapid kinetics of response make them the ideal front-line treatment for symptomatic, BRAF-mutant advanced melanoma patients. Nevertheless, the development of mechanisms of resistance limits the duration of response to such treatment in the majority of cases, with only about 20% of patients treated with the combination being progression-free at 3 years. The aim of this review is to report the efficacy and safety outcomes of the combination of BRAF plus MEK inhibitors compared with BRAF inhibitor monotherapy and immunotherapy, as well as to discuss future perspectives to improve outcomes based on current clinical and translational research studies.

  18. Survey of Yogurt Powder Storage in Ambient Export Countries A Safety Evaluation Standard Compliance and Comparative Analysis.

    Science.gov (United States)

    Kim, Na-Kyeong; Park, Jung-Min; Lee, Jung-Hoon; Kim, Ha-Jung; Oh, Sejong; Imm, Jee-Young; Lim, Kwang-Sei; Kim, Jin-Man

    2015-01-01

    Yogurt powder is fermented milk processed in the form of dry yogurt, and has advantages such as stability, storability, convenience, and portability. China and Vietnam are important export target countries because of the increased demand for dairy products. Therefore, we surveyed dairy product standardization in order to establish an export strategy. Lactic acid bacteria counts are unregulated in Korea and Vietnam. In China, lactic acid bacteria counts are regulated at 1×10(6) colony-forming units (CFU)/mL and detected at 6.24±0.33 Log CFU/mL. All three countries have regulated standards for total bacterial counts. In China, total bacterial counts of milk powder are regulated to n=5, c=2, m=50,000, M=200,000 and detected at 6.02±0.12 Log CFU/mL, exceeding the acceptable level. Lactic acid bacterial counts appeared to exceed total bacterial counts. Coliform group counts, Staphylococcus aureus, Listeria monocytogenes, and Salmonella species were not detected. Acidity is not regulated in Korea and Vietnam. In China, acidity was regulated to over 70°T and detected 352.38±10.24°T. pH is unregulated in all three countries. pH was compared to that of general fermented milk, which is 4.2, and that of the sample was 4.28±0.01. Aflatoxin levels are not regulated in Korea and China. In Vietnam, aflatoxin level is regulated at 0.05 ppb. Therefore, all ingredients of the yogurt powder met the safety standards. This data obtained in this study can be used as the basic data in assessing the export quality of yogurt powder.

  19. Target localization on standard axial images in computed tomography (CT) stereotaxis for functional neurosurgery - a technical note

    International Nuclear Information System (INIS)

    Patil, A.-A.

    1986-01-01

    A simple technique for marking functional neurosurgery target on computed tomography (CT) axial image is described. This permits the use of standard axial image for computed tomography (CT) stereotaxis in functional neurosurgery. (Author)

  20. Targeting the epidermal growth factor receptor in solid tumors: focus on safety.

    Science.gov (United States)

    Lucchini, Eleonora; Pilotto, Sara; Spada, Elisa; Melisi, Davide; Bria, Emilio; Tortora, Giampaolo

    2014-05-01

    Inhibition of the EGFR has emerged as a promising anticancer strategy, offering improved efficacy and quality of life for patients affected by tumors. The overall level of toxicity associated with EGFR inhibitors is low compared to other chemotherapy drugs, although they are commonly associated with skin and gastrointestinal adverse events. Thus, patients' quality of life may be considerably affected both by a physical and a psychosocial perspective. Adverse events that lead to treatment interruption or cessation may significantly compromise their outcome. This review summarizes the characteristics of the distinctive toxicities of drugs targeting EGFR, addressing their incidence, pathophysiology and clinical presentation with a focus on the management of skin rash and other relevant adverse events, according to the available clinical evidence. Data regarding the correlation between the development of skin rash and clinical outcome are also reported. Drugs targeting EGFR are associated with a lower overall incidence of systemic side effects compared to standard chemotherapeutic agents; nevertheless, an increased risk of distinct toxicities that may affect patient's quality of life and anticancer treatment compliance is observed. Thus, clinical training projects directed toward a more accurate knowledge of such adverse events are essential to maximize the progress of targeted therapies against cancer.

  1. Cross-index to DOE-prescribed occupational safety codes and standards

    International Nuclear Information System (INIS)

    1981-01-01

    This Cross-Index volume is the 1981 compilation of detailed information from more than three hundred and fifty DOE prescribed or OSHA referenced industrial safety codes and standards and is revised yearly to provide information from current codes. Condensed data from individual code portions are listed according to reference code, section, paragraph and page. Each code is given a two-digit reference code number or letter in the Contents section (pages C to L) of this volume. This reference code provides ready identification of any code listed in the Cross-Index. The computerized information listings are on the left-hand portion of Cross-Index page; in order to the right of the listing are the reference code letters or numbers, the section, paragraph and page of the referenced code containing expanded information on the individual listing

  2. Safety assessment of a standardized polyphenolic extract of clove buds: Subchronic toxicity and mutagenicity studies

    Directory of Open Access Journals (Sweden)

    Liju Vijayasteltar

    2016-01-01

    Full Text Available Despite the various reports on the toxicity of clove oil and its major component eugenol, systematic evaluations on the safety of polyphenolic extracts of clove buds have not been reported. Considering the health beneficial pharmacological effects and recent use of clove polyphenols as dietary supplements, the present study investigated the safety of a standardized polyphenolic extract of clove buds (Clovinol, as assessed by oral acute (5 g/kg b.wt. for 14 days and subchronic (0.25, 0.5 and 1 g/kg b.wt. for 90 days toxicity studies on Wistar rats and mutagenicity studies employing Salmonella typhimurium strains. Administration of Clovinol did not result in any toxicologically significant changes in clinical/behavioural observations, ophthalmic examinations, body weights, organ weights, feed consumption, urinalysis, hematology and clinical biochemistry parameters when compared to the untreated control group of animals, indicating the no observed-adverse-effect level (NOAEL as 1000 mg/kg b.wt./day; the highest dose tested. Terminal necropsy did not reveal any treatment-related histopathology changes. Clovinol did not show genotoxicity when tested on TA-98, TA-100 and TA-102 with or without metabolic activation; rather exhibited significant antimutagenic potential against the known mutagens, sodium azide, NPD and tobacco as well as against 2-acetamidoflourene, which needed metabolic activation for mutagenicity.

  3. Differences in safety margins between nuclear and conventional design standards with regards to seismic hazard definition and design criteria

    International Nuclear Information System (INIS)

    Elgohary, M.; Saudy, A.; Orbovic, N.; Dejan, D.

    2006-01-01

    With the surging interest in new build nuclear all over the world and a permanent interest in earthquake resistance of nuclear plants, there is a need to quantify the safety margins in nuclear buildings design in comparison to conventional buildings in order to increase the public confidence in the safety of nuclear power plants. Nuclear (CAN3-N289 series) and conventional (NBCC 2005) seismic standards have different approaches regarding the design of civil structures. The origin of the differences lays in the safety philosophy behind the seismic nuclear and conventional standards. Conventional seismic codes contain the minimal requirement destined primarily to safeguard against major structural failure and loss of life. It doesn't limit damage to a certain acceptable degree or maintain function. Nuclear seismic code requires that structures, systems and components important to safety, withstand the effects of earthquakes. The requirement states that for equipment important to safety, both integrity and functionality should be ascertained. The seismic hazard is generally defined on the basis of the annual probability of exceedence (return period). There is a major difference on the return period and the confidence level for design earthquakes between the conventional and the nuclear seismic standards. The seismic design criteria of conventional structures are based on the use of Force Modification Factors to take into account the energy dissipation by incursion in non-elastic domain and the reserve of strength. The use of such factors to lower intentionally the seismic input is consistent with the safety philosophy of the conventional seismic standard which is the 'non collapse' rather than the integrity and/or the operability of the structures or components. Nuclear seismic standard requires that the structure remain in the elastic domain; energy dissipation by incursion in non-elastic domain is not allowed for design basis earthquake conditions. This is

  4. Description of the food safety system in hotels and how it compares with HACCP standards.

    Science.gov (United States)

    Fletcher, Stephanie M; Maharaj, Satnarine R; James, Kenneth

    2009-01-01

    Tourism is an important earner of foreign exchange in Jamaica; hence, the protection of the visitors' health is very important. A study of travelers to Jamaica in 1996 to 1997 found that travelers' diarrhea (TD) affected almost 25% of visitors. The Ministry of Health (Jamaica) initiated a program for the prevention and control of TD aimed at reducing attack rates from 25.0% to 12.0% over a 5-year period through environmental health and food safety standards of hotels. This article examines the food safety systems in Jamaican hotels located in a popular resort area to find out how comparable they are with the Hazard Analysis Critical Control Point (HACCP) strategy. A cross-sectional study was done of hotels in St. Mary and St. Ann. Quantitative data were obtained from food and beverage/sanitation staff and qualitative data through in-depth interviews with hotel managers. Observation of the food safety operations was also done. The majority (75%) of larger hotels used a combination of HACCP and Ministry of Health food safety strategies (p = 0.02) and offered all-inclusive services (r =-0.705, p = 0.001). Larger hotels were more likely to have a better quality team approach, HACCP plan, and monitoring of critical control points (CCPs) and more likely to receive higher scores (p hotel staff were knowledgeable of HACCP. Significantly smaller hotels (87.5%) received less than 70% in overall score (r = 0.75, p = 0.01). Identification of CCPs and monitoring of CCPs explained 96.6% of the change in the overall HACCP scores (p = 0.001). Hotel managers felt that some hotels' systems were comparable with HACCP and that larger properties were ready for mandatory implementation. Conclusions. While some components of the HACCP system were observed in larger hotels, there were serious shortcomings in its comparison. Mandatory implementation of HACCP would require that sector-specific policies be developed for smaller hotels and implemented on a phased basis.

  5. Optimized nonclinical safety assessment strategies supporting clinical development of therapeutic monoclonal antibodies targeting inflammatory diseases.

    Science.gov (United States)

    Brennan, Frank R; Cauvin, Annick; Tibbitts, Jay; Wolfreys, Alison

    2014-05-01

    An increasing number of immunomodulatory monoclonal antibodies (mAbs) and IgG Fc fusion proteins are either approved or in early-to-late stage clinical trials for the treatment of chronic inflammatory conditions, autoimmune diseases and organ transplant rejection. The exquisite specificity of mAbs, in combination with their multi-functional properties, high potency, long half-life (permitting intermittent dosing and prolonged pharamcological effects), and general lack of off-target toxicity makes them ideal therapeutics. Dosing with mAbs for these severe and debilitating but often non life-threatening diseases is usually prolonged, for several months or years, and not only affects adults, including sensitive populations such as woman of child-bearing potential (WoCBP) and the elderly, but also children. Immunosuppression is usually a therapeutic goal of these mAbs and when administered to patients whose treatment program often involves other immunosuppressive therapies, there is an inherent risk for frank immunosuppression and reduced host defence which when prolonged increases the risk of infection and cancer. In addition when mAbs interact with the immune system they can induce other adverse immune-mediated drug reactions such as infusion reactions, cytokine release syndrome, anaphylaxis, immune-complex-mediated pathology and autoimmunity. An overview of the nonclinical safety assessment and risk mitigation strategies utilized to characterize these immunomodulatory mAbs and Fc fusion proteins to support first-in human (FIH) studies and futher clinical development in inflammatory disease indications is provided. Specific emphasis is placed on the design of studies to qualify animal species for toxicology studies, early studies to investigate safety and define PK/PD relationships, FIH-enabling and chronic toxicology studies, immunotoxicity, developmental, reproductive and juvenile toxicity studies and studies to determine the potential for immunosuppression and

  6. Safety aspects of targets for ADTT: Activity, volatile products, residual heat release

    International Nuclear Information System (INIS)

    Gai, E.V.; Ignatyuk, A.V.; Lunev, V.P.; Shubin, Yu.N.

    1999-01-01

    Safety aspects of heavy metal liquid targets for the accelerator driven systems connected with the activity accumulation and residual energy release due to the irradiation with high energy proton beam are discussed. The results obtained for the lead-bismuth target that are under construction in IPPE now in the frame of ISTC Project No. 559 are briefly presented. The calculations and the analysis of the accumulation of the spallation reaction products, activity and energy release at various moments after the accelerator shutdown are presented. The concentrations of the reaction products, the total and partial activities, the activities of volatile products are determined. The contributions of the short-lived nuclides important for the prediction of the facility behaviour in regimes with the accelerator beam trips. The calculations and analysis of the residual energy release due to different decay type have been performed. The conclusions are as follows. The obtained results showed that long lived radioactivity accumulates mainly due to primary nuclear reactions. Secondary reactions are responsible for the production of small number of long-lived isotopes Bi-207, Po-210 and some others, being generated by radiative capture of low energy neutrons. It is possible to make a conclusion that neutrons in the energy range 20 - 800 MeV and protons with energy above 100 MeV give main contribution to the total activity generation although these parts of spectra inside the target give comparatively small contribution to the total flux. The correct consideration of short-lived nuclides contribution is the main problem in the analysis of the target behaviour in the case of short accelerator shutdowns. They make the determining contribution to the both activity and the heat release at the first moments after the accelerator shutdown, creating the intermediate links and additional channels for the long-lived nuclides accumulation chains. The strong dependence of calculated

  7. Safety

    International Nuclear Information System (INIS)

    1998-01-01

    A brief account of activities carried out by the Nuclear power plants Jaslovske Bohunice in 1997 is presented. These activities are reported under the headings: (1) Nuclear safety; (2) Industrial and health safety; (3) Radiation safety; and Fire protection

  8. Animal production food safety: priority pathogens for standard setting by the World Organisation for Animal Health.

    Science.gov (United States)

    Knight-Jones, T J D; Mylrea, G E; Kahn, S

    2010-12-01

    In this short study, expert opinion and a literature review were used to identify the pathogens that should be prioritised by the World Organisation for Animal Health (OIE) for the development of future standards for animal production food safety. Prioritisation was based on a pathogen's impact on human health and amenability to control using on-farm measures. As the OIE mandate includes alleviation of global poverty, the study focused on developing countries and those with 'in-transition' economies. The regions considered were Eastern Europe, Asia, the Middle East, Africa and South America. Salmonella (from species other than poultry) and pathogenic Escherichia coli were considered to be top priorities. Brucella spp., Echinococcus granulosus and Staphylococcus aureus were also mentioned by experts. As Salmonella, and to a lesser extent pathogenic E. coli, can be controlled by on-farm measures, these pathogens should be considered for prioritisation in future standard setting. On-farm control measures for Brucella spp. will be addressed in 2010-2011 in a review of the OLE Terrestrial Animal/Health Code chapter on brucellosis. In Africa, E. granulosus, the causative agent of hydatidosis, was estimated to have the greatest impact of all pathogens that could potentially be transmitted by food (i.e. via contamination). It was also listed for the Middle East and thought to be of importance by both South American experts consulted. Taenia saginata was thought to be of importance in South America and Africa and by one expert in the Middle East.

  9. Standards for digital computers used in non-safety nuclear power plant applications: objectives and limitations

    International Nuclear Information System (INIS)

    Rorer, D.C.; Long, A.B.

    1977-01-01

    There are currently a number of efforts to develop standards which would apply to digital computers used in nuclear power plants for functions other than those directly involving plant protection (for example, ANS: 4.3.3 Subworking Group in the U.S., IEC 45A/WGA1 Subcommittee in Europe). The impetus for this activity is discussed and generally attributed to the realization that nonsafety systems computers may affect the assumptions used as the design bases for safety systems, the sizable economic loss which can result from the failure of a critical computer application, and the lingering concern about the misapplication of a still-new technology. At the same time, it is pointed out that these standards may create additional obstacles for the use of this new technology which are not present in the application of more conventional instrumentation and control equipment. Much of the U.S. effort has been directed toward the problem of validation of computer systems in which the potential exists for unplanned interactions between various functions in a multiprogram environment, using common hardware in a time-sharing mode. The goal is to develop procedures for the specification, development implementation, and documentation of testable, modular systems which, in the absence of proven quantitative techniques for assessing software reliability, are felt to provide reasonable assurance that the computer system will function as planned

  10. Safety evaluation of standardized allergen extract of Japanese cedar pollen for sublingual immunotherapy.

    Science.gov (United States)

    Mitobe, Yuko; Yokomoto, Yasuki; Ohashi-Doi, Katsuyo

    2015-04-01

    Japanese cedar (JC) pollinosis is caused by Japanese cedar pollen (JCP) and most common seasonal allergic disease in Japan. Subcutaneous immunotherapy (SCIT) with allergen extract of JCP (JCP-allergen extract) is well established for JC pollinosis treatment with improvement of symptoms. However, major drawbacks for SCIT are repeated painful injections, frequent hospital visits and anaphylactic risk. Currently, sublingual immunotherapy (SLIT) has received much attention as an advanced alternative application with lower incidence of systemic reactions because the liquid or tablet form of allergen is placed under the tongue. The aim of this study was safety evaluation of standardized JCP-allergen extract currently developed for SLIT in JC pollinosis. JCP-allergen extract showed no potential genotoxicity. No systemic effects were observed in rats administered JCP-allergen extract orally for 26 weeks followed by 4-week recovery period. Mild local reactions such as hyperplasia and increased globule leukocytes resulting from vehicle (glycerin)-induced irritation were observed in stomach. No-observed-adverse-effect level was greater than 10,000 JAU/kg/day for systemic toxicity, equivalent to 300-fold the human dose. No local irritation was found in rabbits oral mucosae by 7-day sublingual administration. These results demonstrate the safe profile of standardized JCP-allergen extract, suggesting it is suitable for SLIT in JC pollinosis. Copyright © 2015 Elsevier Inc. All rights reserved.

  11. Overview of Development and Deployment of Codes, Standards and Regulations Affecting Energy Storage System Safety in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Conover, David R.

    2014-08-22

    This report acquaints stakeholders and interested parties involved in the development and/or deployment of energy storage systems (ESS) with the subject of safety-related codes, standards and regulations (CSRs). It is hoped that users of this document gain a more in depth and uniform understanding of safety-related CSR development and deployment that can foster improved communications among all ESS stakeholders and the collaboration needed to realize more timely acceptance and approval of safe ESS technology through appropriate CSR.

  12. A Framework for School Safety and Risk Management: Results from a Study of 18 Targeted School Shooters

    Science.gov (United States)

    Lenhardt, Ann Marie C.; Graham, Lemuel W.; Farrell, Melissa L.

    2018-01-01

    Targeted violence continues to pose a threat to school safety. Reported here are the results of a study of 18 cases of school shooters from 1996 to 2012. Variables examined are individual factors and behaviors, family dynamics, and triggering events. Results indicate the need for expanded school-based mental health services, threat assessment, and…

  13. Japanese standard method for safety evaluation using best estimate code based on uncertainty and scaling analyses with statistical approach

    International Nuclear Information System (INIS)

    Mizokami, Shinya; Hotta, Akitoshi; Kudo, Yoshiro; Yonehara, Tadashi; Watada, Masayuki; Sakaba, Hiroshi

    2009-01-01

    Current licensing practice in Japan consists of using conservative boundary and initial conditions(BIC), assumptions and analytical codes. The safety analyses for licensing purpose are inherently deterministic. Therefore, conservative BIC and assumptions, such as single failure, must be employed for the analyses. However, using conservative analytical codes are not considered essential. The standard committee of Atomic Energy Society of Japan(AESJ) has drawn up the standard for using best estimate codes for safety analyses in 2008 after three-years of discussions reflecting domestic and international recent findings. (author)

  14. The IAEA International Seismic Safety Centre and IAEA safety standards for site evaluation and design of NPPs

    International Nuclear Information System (INIS)

    Godoy, A.; Sollogoub, P; )

    2009-01-01

    This presentation covers the following topics: 'Lessons learned' from the occurrence of strong natural events, (tsunamis, earthquakes, hurricanes, etc.) The International Seismic Safety Centre as a global focal point for the nuclear engineering community in those fields. A need for international cooperation, openness and transparency – Sharing of experience

  15. 76 FR 77183 - Federal Motor Vehicle Safety Standards; Theft Protection and Rollaway Prevention

    Science.gov (United States)

    2011-12-12

    ... available, will be beneficial to highway safety. Production of vehicles with these systems has grown from.... ``Technical Assessment of Toyota Electronic Throttle Control (ETC) Systems,'' National Highway Traffic Safety.... ``Technical Assessment of Toyota Electronic Throttle Control (ETC) Systems,'' National Highway Traffic Safety...

  16. An outbreak of Clostridium perfringens and the enforcement of food safety standards.

    Science.gov (United States)

    Young, Megan K; Smith, Peta; Holloway, Jack; Davison, Rod P

    2008-12-01

    Investigation and management of a possible foodborne outbreak notified to the Brisbane Northside Population Health Unit aimed to determine the likely source of the outbreak and prevent the same scenario from recurring. Environmental health officers inspected the implicated premises and collected legal samples prior to the 1st outbreak control team meeting. Interview evidence was carefully documented. Inspection revealed large quantities of meat dishes being allowed to cool at room temperature overnight. Microbiological results implicated the meat dishes as a source of Clostridium perfringens, consistent with the cause of illness in notified cases. When educational measures failed to alter food handling practices, the restaurant owner was successfully prosecuted under the Food Act 2006. Education and voluntary compliance with food safety standards must form the foundation of sustainable behaviour change among food handlers. When these fail, prosecution is justified to mitigate the risk to public health. Immediate inspection, sampling left over food, and attention to formal interview technique and evidence collection can assist the investigation of outbreaks of foodborne illness and help to ensure any necessary court proceedings are a cost effective use of resources.

  17. Guideline adherence to chemotherapy administration safety standards: a survey on nurses in a single institute.

    Science.gov (United States)

    Kim, Kidong; Lee, Hee Sook; Kim, Younha; Kim, Beob-Jong; Kim, Moon-Hong; Choi, Seok-Cheol; Ryu, Sang-Young

    2011-03-31

    Little is known about the guideline adherence of nurses to chemotherapy administration guidelines. We determined the guideline adherence of nurses to the Chemotherapy Administration Safety Standards and the relationship between demographic characteristics and guideline adherence. Survey sheets containing two questions on demographic characteristics and 16 questions on the guideline adherence of nurses regarding chemotherapy administration were distributed to all in-patient departments in our hospital in which chemotherapy was performed. All clinical nurses in the department were recommended to respond. Of 202 nurses, 123 responses were collected (61% response rate). The guideline adherence rate was >70% for 15 of 16 questions, but 55% of respondents indicated that there was no competency monitoring for nurses. Nurses with >7 years of clinical nursing experience felt more competent in performing cardiopulmonary resuscitation (CPR) than nurses with guideline adherence rate of nurses with respect to chemotherapy administration was high, with the exception of the absence of a competency monitoring for nurses. A significant number of nurses with <7 years of clinical nursing experience felt incompetent in performing CPR.

  18. Cost-effectiveness analysis of risk-reduction measures to reach water safety targets.

    Science.gov (United States)

    Lindhe, Andreas; Rosén, Lars; Norberg, Tommy; Bergstedt, Olof; Pettersson, Thomas J R

    2011-01-01

    Identifying the most suitable risk-reduction measures in drinking water systems requires a thorough analysis of possible alternatives. In addition to the effects on the risk level, also the economic aspects of the risk-reduction alternatives are commonly considered important. Drinking water supplies are complex systems and to avoid sub-optimisation of risk-reduction measures, the entire system from source to tap needs to be considered. There is a lack of methods for quantification of water supply risk reduction in an economic context for entire drinking water systems. The aim of this paper is to present a novel approach for risk assessment in combination with economic analysis to evaluate risk-reduction measures based on a source-to-tap approach. The approach combines a probabilistic and dynamic fault tree method with cost-effectiveness analysis (CEA). The developed approach comprises the following main parts: (1) quantification of risk reduction of alternatives using a probabilistic fault tree model of the entire system; (2) combination of the modelling results with CEA; and (3) evaluation of the alternatives with respect to the risk reduction, the probability of not reaching water safety targets and the cost-effectiveness. The fault tree method and CEA enable comparison of risk-reduction measures in the same quantitative unit and consider costs and uncertainties. The approach provides a structured and thorough analysis of risk-reduction measures that facilitates transparency and long-term planning of drinking water systems in order to avoid sub-optimisation of available resources for risk reduction. Copyright © 2010 Elsevier Ltd. All rights reserved.

  19. Safety and performance of targeted renal therapy: the Be-RITe! Registry.

    Science.gov (United States)

    Weisz, Giora; Filby, Steven J; Cohen, Mauricio G; Allie, David E; Weinstock, Barry S; Kyriazis, Dimitris; Walker, Craig M; Moses, Jeffrey W; Danna, Paolo; Fearon, William F; Sachdev, Naveen; Wiechmann, Bret N; Vora, Kishor; Findeiss, Laura; Price, Matthew J; Mehran, Roxana; Leon, Martin B; Teirstein, Paul S

    2009-02-01

    To evaluate the safety and patterns of use of targeted renal therapy (TRT) with the Benephit system. TRT, the delivery of therapeutic agents directly to the kidneys by renal arterial infusion, has the advantage of providing a higher local effective dose with potentially greater renal effects, while limiting systemic adverse effects due to renal first-pass elimination. The Benephit System Renal Infusion Therapy (Be-RITe!) Multicenter Registry was a post-market registry following patients treated using the Benephit systems for TRT. The registry enrolled 501 patients (332 men; mean age 72.2+/-9.5 years) at high risk for contrast-induced nephropathy (CIN) during coronary or peripheral angiography/intervention or cardiovascular surgery. The Mehran score was used to compare the actual to predicted incidence of CIN within 48 hours post procedure. Bilateral renal artery cannulation was successful in 94.2%, with a mean cannulation time of 2.0 minutes. Either fenoldopam mesylate, sodium bicarbonate, alprostadil, or B-type natriuretic peptide (BNP) was infused for 184+/-212 minutes. Mean creatinine levels did not change significantly (baseline, 24, and 48 hours post procedure: 1.95, 1.99, and 1.98 mg/dL, respectively; p = NS). In 285 patients who received TRT with fenoldopam and were followed for at least 48 hours, the incidence of CIN was 71% lower than predicted (8.1% actual CIN versus 28.0% predicted; p<0.0001). Only 4 (1.4%) patients required dialysis (versus the 2.6% predicted rate, p = NS). The Benephit system and TRT during coronary and endovascular procedures in patients at high risk for renal failure is simple to use and safe. With the infusion of intrarenal fenoldopam, the incidence of CIN was significantly lower than predicted by risk score calculations.

  20. 78 FR 36711 - Food and Drug Administration Safety and Innovation Act Title VII-Drug Supply Chain; Standards for...

    Science.gov (United States)

    2013-06-19

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Chapter I [Docket Nos. FDA-2013-N-0683, FDA-2013-N-0684, and FDA-2013-N-0685] Food and Drug Administration Safety and Innovation Act Title VII--Drug Supply Chain; Standards for Admission of Imported Drugs, Registration of...

  1. Nuclear power plants - Instrumentation and control systems important for safety - Classification (International Electrotechnical Commission Standard Publication 1226:1993)

    International Nuclear Information System (INIS)

    Stefanik, J.

    1996-01-01

    This international standard established a method of classification of the information and command functions for nuclear power plants, and the I and C and equipment that provide those functions, into categories that designate the importance for safety of the functions, and the associated systems and equipment. The resulting classification then determines relevant design criteria. The design criteria are the measures of quality by which the adequacy of each functions, and the associated systems and equipment in relation to its importance to plant safety is ensured. In this standard, the criteria are those of functionality, reliability, performance, environmental durability and quality assurance. This standard is applicable to all the information and command functions, and the instrumentation and control systems and equipment that provide those functions. The functions, systems and equipment under consideration provide automated protection, closed or open loop control, and information to the operating staff. They keep the NPP conditions inside the safe operating envelope and provide automatic actions, or enable manual actions, that mitigate accidents or prevent or minimize radioactive releases to the site or wider environment. The functions, and the associated systems and equipment that fulfill these roles safeguard the health and safety of the NPP operators and the public. This standard complements, and does not replace or supersede, the Safety Guides and Codes of Practice published by the International Atomic Energy Agency

  2. Issues relating to safety standards on the geological disposal of radioactive waste. Proceedings of a specialists meeting

    International Nuclear Information System (INIS)

    2002-06-01

    Within the International Atomic Energy Agency focus is currently being placed on establishing safety standards for the geological disposal of radioactive waste. This is a challenging task and a Specialists Meeting was held from 18 to 22 June 2001 with the intention of providing a mechanism for promoting discussion on some of the associated scientific and technical issues and as a means of developing the consensus needed for establishing the standards. The meeting used, as its basis, a number of position papers developed in recent years with the help of a subgroup of the Waste Safety Standards Committee (WASSC), the subgroup on Principles and Criteria for Radioactive Waste Disposal, together with selected relevant regional and national papers. The report contains the summaries of the sessions of the Specialists Meeting together with the conclusions drawn relevant to the establishment of standards. The sessions of the Meeting addressed the following topics: Common framework for radioactive waste disposal; Making the safety case - demonstrating compliance; Safety indicators; Reference critical groups and biospheres; Human intrusion; Reversibility and retrievability; Monitoring and institutional control. The publication contains 26 individual presentations delivered by participants. Each of these presentations was indexed separately

  3. Assessing risks and regulating safety standards in the oil and gas industry: the Peruvian experience.

    OpenAIRE

    Arturo Leonardo Vásquez Cordano; Julio Salvador Jácome; Raúl Lizardo García Carpio; Victor Fernández Guzman

    2013-01-01

    Environmental regulation has usually focused on controlling continuous sources of pollution such as CO2 emissions through carbon taxes. However, the 2010 oil spill in the Gulf of Mexico has shown that accidents associated to safety failures can also generate bursts of pollution with serious environmental consequences. Regulating safety conditions to prevent accidents in the oil and gas industry is challenging because public regulators cannot perfectly observe whether firms comply with safety ...

  4. Partial Safety Factors and Target Reliability Level in Danish Structural Codes

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Hansen, J. O.; Nielsen, T. A.

    2001-01-01

    The partial safety factors in the newly revised Danish structural codes have been derived using a reliability-based calibration. The calibrated partial safety factors result in the same average reliability level as in the previous codes, but a much more uniform reliability level has been obtained...

  5. SAFETY

    CERN Document Server

    Niels Dupont

    2013-01-01

    CERN Safety rules and Radiation Protection at CMS The CERN Safety rules are defined by the Occupational Health & Safety and Environmental Protection Unit (HSE Unit), CERN’s institutional authority and central Safety organ attached to the Director General. In particular the Radiation Protection group (DGS-RP1) ensures that personnel on the CERN sites and the public are protected from potentially harmful effects of ionising radiation linked to CERN activities. The RP Group fulfils its mandate in collaboration with the CERN departments owning or operating sources of ionising radiation and having the responsibility for Radiation Safety of these sources. The specific responsibilities concerning "Radiation Safety" and "Radiation Protection" are delegated as follows: Radiation Safety is the responsibility of every CERN Department owning radiation sources or using radiation sources put at its disposition. These Departments are in charge of implementing the requi...

  6. Catalogue of standards at the Safety Analysis department library, the first of March 1987

    International Nuclear Information System (INIS)

    1987-01-01

    This report is a compilation of ANS and ANSI/ANS, ANSI/ASME american standards, Regulatory guides (Power Reactor Division), IEEE standards, to which are added ANSI american standards, AFNOR french standards, all of them being updated until to day. This computed compilation is divided into three parts: 1) main descriptor categories; 2) list of american standards in chronological order, list of AFNOR french standards, list of Regulatory guides in numerical order. 3) list of descriptors in alphabetic order [fr

  7. Overview of the U.S. DOE Hydrogen Safety, Codes and Standards Program. Part 4: Hydrogen Sensors; Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Buttner, William J.; Rivkin, Carl; Burgess, Robert; Brosha, Eric; Mukundan, Rangachary; James, C. Will; Keller, Jay

    2016-12-01

    Hydrogen sensors are recognized as a critical element in the safety design for any hydrogen system. In this role, sensors can perform several important functions including indication of unintended hydrogen releases, activation of mitigation strategies to preclude the development of dangerous situations, activation of alarm systems and communication to first responders, and to initiate system shutdown. The functionality of hydrogen sensors in this capacity is decoupled from the system being monitored, thereby providing an independent safety component that is not affected by the system itself. The importance of hydrogen sensors has been recognized by DOE and by the Fuel Cell Technologies Office's Safety and Codes Standards (SCS) program in particular, which has for several years supported hydrogen safety sensor research and development. The SCS hydrogen sensor programs are currently led by the National Renewable Energy Laboratory, Los Alamos National Laboratory, and Lawrence Livermore National Laboratory. The current SCS sensor program encompasses the full range of issues related to safety sensors, including development of advance sensor platforms with exemplary performance, development of sensor-related code and standards, outreach to stakeholders on the role sensors play in facilitating deployment, technology evaluation, and support on the proper selection and use of sensors.

  8. Applications of Dynamic Clamp to Cardiac Arrhythmia Research: Role in Drug Target Discovery and Safety Pharmacology Testing.

    Science.gov (United States)

    Ortega, Francis A; Grandi, Eleonora; Krogh-Madsen, Trine; Christini, David J

    2017-01-01

    Dynamic clamp, a hybrid-computational-experimental technique that has been used to elucidate ionic mechanisms underlying cardiac electrophysiology, is emerging as a promising tool in the discovery of potential anti-arrhythmic targets and in pharmacological safety testing. Through the injection of computationally simulated conductances into isolated cardiomyocytes in a real-time continuous loop, dynamic clamp has greatly expanded the capabilities of patch clamp outside traditional static voltage and current protocols. Recent applications include fine manipulation of injected artificial conductances to identify promising drug targets in the prevention of arrhythmia and the direct testing of model-based hypotheses. Furthermore, dynamic clamp has been used to enhance existing experimental models by addressing their intrinsic limitations, which increased predictive power in identifying pro-arrhythmic pharmacological compounds. Here, we review the recent advances of the dynamic clamp technique in cardiac electrophysiology with a focus on its future role in the development of safety testing and discovery of anti-arrhythmic drugs.

  9. Discovery of safety biomarkers for atorvastatin in rat urine using mass spectrometry based metabolomics combined with global and targeted approach

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Bhowmik Salil [Bioanalysis and Biotransformation Research Center, Korea Institute of Science and Technology, P.O. Box 131, Cheongryang, Seoul 130-650 (Korea, Republic of); University of Science and Technology, (305-333) 113 Gwahangno, Yuseong-gu, Daejeon (Korea, Republic of); Lee, Young-Joo; Yi, Hong Jae [College of Pharmacy, Kyung Hee University, Hoegi-dong, Dongdaemun-gu, Seoul 130-791 (Korea, Republic of); Chung, Bong Chul [Bioanalysis and Biotransformation Research Center, Korea Institute of Science and Technology, P.O. Box 131, Cheongryang, Seoul 130-650 (Korea, Republic of); Jung, Byung Hwa, E-mail: jbhluck@kist.re.kr [Bioanalysis and Biotransformation Research Center, Korea Institute of Science and Technology, P.O. Box 131, Cheongryang, Seoul 130-650 (Korea, Republic of); University of Science and Technology, (305-333) 113 Gwahangno, Yuseong-gu, Daejeon (Korea, Republic of)

    2010-02-19

    In order to develop a safety biomarker for atorvastatin, this drug was orally administrated to hyperlipidemic rats, and a metabolomic study was performed. Atorvastatin was given in doses of either 70 mg kg{sup -1} day{sup -1} or 250 mg kg{sup -1} day{sup -1} for a period of 7 days (n = 4 for each group). To evaluate any abnormal effects of the drug, physiological and plasma biochemical parameters were measured and histopathological tests were carried out. Safety biomarkers were derived by comparing these parameters and using both global and targeted metabolic profiling. Global metabolic profiling was performed using liquid chromatography/time of flight/mass spectrometry (LC/TOF/MS) with multivariate data analysis. Several safety biomarker candidates that included various steroids and amino acids were discovered as a result of global metabolic profiling, and they were also confirmed by targeted metabolic profiling using gas chromatography/mass spectrometry (GC/MS) and capillary electrophoresis/mass spectrometry (CE/MS). Serum biochemical and histopathological tests were used to detect abnormal drug reactions in the liver after repeating oral administration of atorvastatin. The metabolic differences between control and the drug-treated groups were compared using PLS-DA score plots. These results were compared with the physiological and plasma biochemical parameters and the results of a histopathological test. Estrone, cortisone, proline, cystine, 3-ureidopropionic acid and histidine were proposed as potential safety biomarkers related with the liver toxicity of atorvastatin. These results indicate that the combined application of global and targeted metabolic profiling could be a useful tool for the discovery of drug safety biomarkers.

  10. Discovery of safety biomarkers for atorvastatin in rat urine using mass spectrometry based metabolomics combined with global and targeted approach

    International Nuclear Information System (INIS)

    Kumar, Bhowmik Salil; Lee, Young-Joo; Yi, Hong Jae; Chung, Bong Chul; Jung, Byung Hwa

    2010-01-01

    In order to develop a safety biomarker for atorvastatin, this drug was orally administrated to hyperlipidemic rats, and a metabolomic study was performed. Atorvastatin was given in doses of either 70 mg kg -1 day -1 or 250 mg kg -1 day -1 for a period of 7 days (n = 4 for each group). To evaluate any abnormal effects of the drug, physiological and plasma biochemical parameters were measured and histopathological tests were carried out. Safety biomarkers were derived by comparing these parameters and using both global and targeted metabolic profiling. Global metabolic profiling was performed using liquid chromatography/time of flight/mass spectrometry (LC/TOF/MS) with multivariate data analysis. Several safety biomarker candidates that included various steroids and amino acids were discovered as a result of global metabolic profiling, and they were also confirmed by targeted metabolic profiling using gas chromatography/mass spectrometry (GC/MS) and capillary electrophoresis/mass spectrometry (CE/MS). Serum biochemical and histopathological tests were used to detect abnormal drug reactions in the liver after repeating oral administration of atorvastatin. The metabolic differences between control and the drug-treated groups were compared using PLS-DA score plots. These results were compared with the physiological and plasma biochemical parameters and the results of a histopathological test. Estrone, cortisone, proline, cystine, 3-ureidopropionic acid and histidine were proposed as potential safety biomarkers related with the liver toxicity of atorvastatin. These results indicate that the combined application of global and targeted metabolic profiling could be a useful tool for the discovery of drug safety biomarkers.

  11. Review of Federal Motor Vehicle Safety Standards (FMVSS) for Automated Vehicles : Identifying Potential Barriers and Challenges for the Certification of Automated Vehicles Using Existing FMVSS

    Science.gov (United States)

    2016-03-11

    The purpose of this work is to identify instances where the existing Federal Motor Vehicle Safety Standards may pose challenges to the introduction of automated vehicles. It identifies standards requiring further review - both to ensure that existing...

  12. 5 CFR 9901.332 - Standard and targeted local market supplements.

    Science.gov (United States)

    2010-01-01

    ... for coverage under a targeted local market supplement may be based on occupation, band, organizational unit, geographic location of official worksite, specializations, special skills or qualifications, or...

  13. 28 CFR 97.20 - Standards to ensure the safety of violent prisoners during transport.

    Science.gov (United States)

    2010-07-01

    ... prisoners during transport. 97.20 Section 97.20 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED... safety of violent prisoners during transport. Companies covered under this section must comply with applicable State and federal laws that govern the safety of violent prisoners during transport. In addition...

  14. 76 FR 11417 - Public Workshop and Hearing for Rear Visibility; Federal Motor Vehicle Safety Standard, Rearview...

    Science.gov (United States)

    2011-03-02

    ..., gross vehicle weight, as specified in the Cameron Gulbransen Kids Transportation Safety Act of 2007 (75... Cameron Gulbransen Kids Transportation Safety Act. Technical Workshop Procedures To ensure that all... affiliation be held to a minimum. For security purposes, photo identification is required to enter NHTSA's...

  15. 40 CFR 745.227 - Work practice standards for conducting lead-based paint activities: target housing and child...

    Science.gov (United States)

    2010-07-01

    ..., child-occupied facilities) on/in which abatement work will be performed. (F) Property name (if... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Work practice standards for conducting lead-based paint activities: target housing and child-occupied facilities. 745.227 Section 745.227...

  16. How Good Is Good: Improved Tracking and Managing of Safety Goals, Performance Indicators, Production Targets and Significant Events Using Learning Curves

    International Nuclear Information System (INIS)

    Duffey, Rommey B.; Saull, John W.

    2002-01-01

    We show a new way to track and measure safety and performance using learning curves derived on a mathematical basis. When unusual or abnormal events occur in plants and equipment, the regulator and good management practice requires they be reported, investigated, understood and rectified. In addition to reporting so-called 'significant events', both management and the regulator often set targets for individual and collective performance, which are used for both reward and criticism. For almost completely safe systems, like nuclear power plants, commercial aircraft and chemical facilities, many parameters are tracked and measured. Continuous improvement has to be demonstrated, as well as meeting reduced occurrence rates, which are set as management goals or targets. This process usually takes the form of statistics for availability of plant and equipment, forced or unplanned maintenance outage, loss of safety function, safety or procedural violations, etc. These are often rolled up into a set of so-called 'Performance Indicators' as measures of how well safety and operation is being managed at a given facility. The overall operating standards of an industry are also measured. A whole discipline is formed of tracking, measuring, reporting, managing and understanding the plethora of indicators and data. Decreasing occurrence rates and meeting or exceeding goals are seen and rewarded as virtues. Managers and operators need to know how good is their safety management system that has been adopted and used (and paid for), and whether it can itself be improved. We show the importance of accumulated experience in correctly measuring and tracking the decreasing event and error rates speculating a finite minimum rate. We show that the rate of improvement constitutes a measurable 'learning curve', and the attainment of the goals and targets can be affected by the adopted measures. We examine some of the available data on significant events, reportable occurrences, and loss of

  17. A holistic strategy for quality and safety control of traditional Chinese medicines by the "iVarious" standard system.

    Science.gov (United States)

    Chen, Anzhen; Sun, Lei; Yuan, Hang; Wu, Aiying; Lu, Jingguang; Ma, Shuangcheng

    2017-10-01

    An effective quality control system is the key to ensuring the quality, safety and efficacy of traditional Chinese medicines (TCMs). However, the current quality standard research lacks the top-design and systematic design, mostly based on specific technologies or evaluation methods. To resolve the challenges and questions of quality control of TCMs, a brand-new quality standard system, named "iVarious", was proposed. The system comprises eight elements in a modular format. Meaning of every element was specifically illustrated via corresponding research instances. Furthermore, frankincense study was taken as an example for demonstrating standards and research process, based on the "iVarious" system. This system highlighted a holistic strategy for effectiveness, security, integrity and systematization of quality and safety control standards of TCMs. The establishment of "iVarious" integrates multi-disciplinary technologies and progressive methods, basis elements and key points of standard construction. The system provides a novel idea and technological demonstration for regulation establishment of TCMs quality standards.

  18. A holistic strategy for quality and safety control of traditional Chinese medicines by the “iVarious” standard system

    Directory of Open Access Journals (Sweden)

    Anzhen Chen

    2017-10-01

    Full Text Available An effective quality control system is the key to ensuring the quality, safety and efficacy of traditional Chinese medicines (TCMs. However, the current quality standard research lacks the top-design and systematic design, mostly based on specific technologies or evaluation methods. To resolve the challenges and questions of quality control of TCMs, a brand-new quality standard system, named “iVarious”, was proposed. The system comprises eight elements in a modular format. Meaning of every element was specifically illustrated via corresponding research instances. Furthermore, frankincense study was taken as an example for demonstrating standards and research process, based on the “iVarious” system. This system highlighted a holistic strategy for effectiveness, security, integrity and systematization of quality and safety control standards of TCMs. The establishment of “iVarious” integrates multi-disciplinary technologies and progressive methods, basis elements and key points of standard construction. The system provides a novel idea and technological demonstration for regulation establishment of TCMs quality standards.

  19. Safety

    International Nuclear Information System (INIS)

    2001-01-01

    This annual report of the Senior Inspector for the Nuclear Safety, analyses the nuclear safety at EDF for the year 1999 and proposes twelve subjects of consideration to progress. Five technical documents are also provided and discussed concerning the nuclear power plants maintenance and safety (thermal fatigue, vibration fatigue, assisted control and instrumentation of the N4 bearing, 1300 MW reactors containment and time of life of power plants). (A.L.B.)

  20. Safety

    CERN Multimedia

    2003-01-01

    Please note that the safety codes A9, A10 AND A11 (ex annexes of SAPOCO/42) entitled respectively "Safety responsibilities in the divisions" "The safety policy committee (SAPOCO) and safety officers' committees" and "Administrative procedure following a serious accident or incident" are available on the web at the following URLs: Code A9: http://edms.cern.ch/document/337016/LAST_RELEASED Code A10: http://edms.cern.ch/document/337019/LAST_RELEASED Code A11: http://edms.cern.ch/document/337026/LAST_RELEASED Paper copies can also be obtained from the TIS divisional secretariat, e-mail: tis.secretariat@cern.ch. TIS Secretariat

  1. Construction safety research in the United States: targeting the Hispanic workforce

    OpenAIRE

    Brunette, M

    2004-01-01

    While it is known that Hispanics have a continuous growing participation in the construction workforce and that their fatal and non-fatal occupational injuries are higher than any other ethnic group, very little construction safety and health research has been conducted in the United States. Research that focuses on safety and health of Hispanic workers employed in the construction industry might prove beneficial in reducing injuries and promoting safe and decent workplaces for all.

  2. Development in France of nuclear safety technical regulations and standards used in the licensing procedure

    International Nuclear Information System (INIS)

    Lebouleux, P.

    1983-04-01

    Initially, the Commissariat a l'Energie Atomique was the overall structure which encompassed all nuclear activities in France, including those connected with radiological protection and nuclear safety. As other partners appeared, the Authorities have laid down national regulations relative to nuclear installations since 1963. These regulations more particularly provide for the addition of prescriptions with which the applicant must comply to obtain the necessary licenses and the establishment of General Technical Regulations pertaining to nuclear safety. The technical regulation related to nuclear safety in France is made of a set of regulation texts, of a different nature, that define the requirements for the construction, commissioning and operation of nuclear facilities. Simultaneously, the safety authorities (Service Central de Surete des Installations Nucleaires: SCSIN) issue recommendations or guides which are not strictly speaking regulations in the juridical sense; they are called ''Regles Fondamentales de Surete'' (RFS). The RFS set up and detail the conditions, the respect of which is deemed to be complying with the French regulation practice, for the subject to which they relate. Their purpose is to make known rules judged acceptable by safety authorities, thus making the safety review easier. A RFS, or a letter, can also give the result of the examination of the constructor and operator codes (RCC) by safety authorities

  3. Appraisal for France of the safety of the transport of radioactive material. Provision for the application of the IAEA safety standards

    International Nuclear Information System (INIS)

    2004-01-01

    The IAEA has the specific statutory function within the United Nations system of establishing standards of safety for the protection of health against exposure to ionizing radiation. As part of this mandate, the IAEA has issued Regulations for the Safe Transport of Radioactive Material, and has also established the Transport Safety Appraisal Service (TranSAS) to carry out, at the request of States, appraisals of the implementation of these regulations. The IAEA carried out such an appraisal in France from 27 March to 8 April 2004. The appraisal addressed all relevant transport activities in France, both national and international, for all modes of transport, with special emphasis on the maritime transport and air transport of radioactive material. This report summarizes the findings of the 13 independent experts who participated in the appraisal

  4. Transposition of the basic safety standards. Potential impact on French laws and regulations

    Energy Technology Data Exchange (ETDEWEB)

    Godet, J.L.; Perrin, M.M.; Saad, N.; Bardelay, C. [Autorite de Surete Nucleaire (ASN), Paris (France)

    2013-07-01

    The new proposal for a Council Directive laying down basic safety standards for protection against the dangers arising from exposure to ionising radiation is about to be adopted. Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive within 4 years after adoption of the final text. As far as France is concerned, these evolutions will mainly impact the labour code (for occupational issues) and the public health code for both legal and regulatory requirements. The most significant improvements of the current version of the project are the introduction of graded approach to regulatory control and the enhancement of requirements for protection against natural radiation sources (in particular exposure to radon and naturally occurring radioactive material). This project also aims at achieving a better harmonisation between Member States for topics such as the organization of radiation protection for workers, the justification of medical devices and non-medical imaging exposure situations. ASN has already identified major issues for the transposition of the Directive concerning both French laws and regulations. Main topics should concern the impact of ICRP terminology (planned exposure situation, existing exposure situation versus lasting exposure situation, reference level versus maximum activity level for exposure to radon..) and the extension of both justification and optimisation principles to new activities involving natural radiation sources, such as industries processing naturally occurring radioactive material. Furthermore, France will have to decide whether it will adjust some positions about the prohibition of nonmedical imaging exposures and the release of materials from regulatory control according to generic values. Indeed, the project mentions the possibility to introduce derogations to those major principles. Finally, and according to the graded approach, the project introduces a new

  5. Estimation of Partial Safety Factors and Target Failure Probability Based on Cost Optimization of Rubble Mound Breakwaters

    DEFF Research Database (Denmark)

    Kim, Seung-Woo; Suh, Kyung-Duck; Burcharth, Hans F.

    2010-01-01

    The breakwaters are designed by considering the cost optimization because a human risk is seldom considered. Most breakwaters, however, were constructed without considering the cost optimization. In this study, the optimum return period, target failure probability and the partial safety factors...... were evaluated by applying the cost optimization to the rubble mound breakwaters in Korea. The applied method was developed by Hans F. Burcharth and John D. Sorensen in relation to the PIANC Working Group 47. The optimum return period was determined as 50 years in many cases and was found as 100 years...... in the case of high real interest rate. Target failure probability was suggested by using the probabilities of failure corresponding to the optimum return period and those of reliability analysis of existing structures. The final target failure probability is about 60% for the initial limit state...

  6. 77 FR 810 - Petitions for Modification of Application of Existing Mandatory Safety Standards

    Science.gov (United States)

    2012-01-06

    ... 300 ton per shift criteria using the hand-loading method. (8) Belt conveyor haulage is not used in... exists. Activation of a safety catch can or will damage the haulage system and subject persons being...

  7. Hazard Communication Standard for Chemical Labels and Safety Data Sheets In GHS Format

    Science.gov (United States)

    This fact sheet provides an overview of the required contents of Safety Data Sheets (SDSs) and chemical hazard labels, and includes tips on how these materials can be used to better protect health and the environment.

  8. Fact Sheet: Revisions to the Occupational Safety and Health Administration Hazard Communication Standards (HCS)

    Science.gov (United States)

    On March 26, 2012, Occupational Safety and Health Administration (OSHA) modified its HCS to conform to the United Nations’ (UN) Globally Harmonized System of Classification and Labeling of Chemicals (GHS), to improve consistency and quality of information.

  9. 75 FR 65034 - Petition for Modification of Existing Mandatory Safety Standard

    Science.gov (United States)

    2010-10-21

    ... operator or representative of miners to file a petition to modify the application of any mandatory safety... much lower; (5) the sinking hoist is operated under computer programmable logical controls (PLC). There...

  10. Standard for administration of stable iodine pilulae. Standard of the nuclear safety commission, action for accident in TEPCO Fukushima-1 and recent European trends

    International Nuclear Information System (INIS)

    Ishihara, Hiroshi

    2011-01-01

    Preventive taking of stable-iodine tablets is effective to avoid thyroid gland disorder due to internal exposure to the radioactive iodine if radioactive iodine is released outside by any nuclear accident. In Japan, the Nuclear Safety Commission proposed the standard of the preventive taking in 2002, and, at the Fukushima Daiichi nuclear disaster, the head of the local task force instructed to take on the recommendation from the Commission. Author described the action principle of stable-iodine tablets, present concept for the preventive taking, recent change of the concept in Europe for the preventive taking, and some precepts which have shown in past Fukushima Daiichi nuclear disaster. (J.P.N.)

  11. Problems encountered in embodying the principles of ICRP-26 and the revised IAEA safety standards into UK national legislation

    International Nuclear Information System (INIS)

    Beaver, P.F.

    1979-01-01

    This paper describes the United Kingdom procedures and format for safety legislation and goes on to show how the necessary legislation for radiological protection will fit into the general framework. The United Kingdom, as a member of the European Community and EURATOM, is bound to implement the Euratom Directive on radiological protection within the next few years. The latest draft of the Directive takes account of the recommendations of ICRP-26 and further, a recent draft of the revised IAEA Basic Safety Standards is a composite of both the Directive and ICRP-26. Thus, the effect of embodying the principles of the Directive is to embody the principles of ICRP-26 and the Basic Safety Standards. Some of the problems which have been met are described and in particular there is discussion of the problems arising from the incorporation of the three ICRP-26 facets of dose control, namely justification, optimization and limitation, into a legislative package. The UK system of evolving safety legislation now requires considerable participation by all the parties affected (or by their representatives). This paper indicates that the involvement of persons affected, coupled with a legislative package which consists of a hierarchy of (a) regulations; (b) codes of practice; and (c) guidance notes, will result in the fundamental principles of ICRP-26 being incorporated into UK legislation in a totally acceptable way. (author)

  12. Quality Oncology Practice Initiative Certification Program: measuring implementation of chemotherapy administration safety standards in the outpatient oncology setting.

    Science.gov (United States)

    Gilmore, Terry R; Schulmeister, Lisa; Jacobson, Joseph O

    2013-03-01

    The Quality Oncology Practice Initiative (QOPI) Certification Program (QCP) evaluates individual outpatient oncology practice performance in areas that affect patient care and safety and builds on the American Society of Clinical Oncology (ASCO) QOPI by assessing the compliance of a practice with certification standards based on the ASCO/Oncology Nursing Society standards for safe chemotherapy administration. To become certified, a practice must attain a benchmark quality score on certification measures in QOPI and attest that it complies with 17 QCP standards. Structured on-site reviews, initially performed in randomly selected practices, became mandatory beginning in September 2011. Of 111 practices that have undergone on-site review, only two were fully concordant with all of the standards (median, 11; range, seven to 17). Most practices were subsequently able to modify practice to become QOPI certified. The QCP addresses the call from the Institute of Medicine to close the quality gap by aligning evidence-based guidelines and consensus-driven standards with requirements for oncology practices to develop and maintain structural safety components, such as policies and procedures that ensure practice performance. On-site practice evaluation is a high-impact component of the program.

  13. The critical role of nurses to the successful implementation of the National Safety and Quality Health Service Standards.

    Science.gov (United States)

    Twigg, Diane E; Duffield, Christine; Evans, Gemma

    2013-09-01

    The National Safety and Quality Health Service Standards requires health service compliance by 2013 and covers several areas including governance arrangements, partnerships with consumers and eight key clinical processes. Nurses in Australia comprise 62% of the hospital workforce, are the largest component and hence play a critical role in meeting these standards and improving the quality of patient care. Several of the standards are influenced by nursing interventions, which incorporate any direct-care treatment that the nurse performs for a patient that may be nurse or physician initiated. The ability for nurses to undertake these interventions is influenced by the hours of care available, the skill mix of the nursing workforce and the environment in which they practice. Taking into consideration the predicted nursing shortages, the challenge to successfully implement the National Safety and Quality Health Service Standards will be great. This paper examines the role of nursing in the delivery of the National Standards, analyses the evidence with regard to nursing-sensitive outcomes and discusses the implications for health service decision makers and policy.

  14. Inventory of Safety-related Codes and Standards for Energy Storage Systems with some Experiences related to Approval and Acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Conover, David R.

    2014-09-11

    The purpose of this document is to identify laws, rules, model codes, codes, standards, regulations, specifications (CSR) related to safety that could apply to stationary energy storage systems (ESS) and experiences to date securing approval of ESS in relation to CSR. This information is intended to assist in securing approval of ESS under current CSR and to identification of new CRS or revisions to existing CRS and necessary supporting research and documentation that can foster the deployment of safe ESS.

  15. The Effect of the New York State Cigarette Fire Safety Standard on Ignition Propensity, Smoke Toxicity and the Consumer market

    OpenAIRE

    Hillel R. Alpert; Carrie Carpenter; Gregory N. Connolly; Vaughan Rees; Geoffrey Ferris Wayne

    2005-01-01

    This report examines New York's initial experience implementing fire safety standards for cigarettes. This study provided the first assessment of the ability of manufacturers to produce cigarettes that reduce ignition propensity, while maintaining price and consumer acceptability. The study also measures a number known toxic compound s commonly found in cigarettes to determine if there are substantial differences in their levels compared to Mssachussetts cigarettes. The study compares laborat...

  16. Construction safety research in the United States: targeting the Hispanic workforce.

    Science.gov (United States)

    Brunette, M J

    2004-08-01

    While it is known that Hispanics have a continuous growing participation in the construction workforce and that their fatal and non-fatal occupational injuries are higher than any other ethnic group, very little construction safety and health research has been conducted in the United States. Research that focuses on safety and health of Hispanic workers employed in the construction industry might prove beneficial in reducing injuries and promoting safe and decent workplaces for all. The purpose of this article was twofold. First, to propose a research agenda where topics such as surveillance, intervention research on high risk occupations, intervention effectiveness evaluation, design and development of effective and appropriate safety training and educational materials, and the socioeconomic impact of injuries and illnesses, are investigated among the Hispanic construction workforce. Second, to present relevant aspects inherent to this particular population that need to be incorporated into the design and development stages of any safety and health research initiative. They include the occupational, social, economic, and cultural background of Hispanic workers; use of a participatory approach, proper selection and use of translation methods; and conducting collaborative research. Certain limitations and challenges related to the availability of resources for conducting safety and health research on Hispanic workers are further discussed.

  17. 77 FR 751 - Federal Motor Vehicle Safety Standards; Matters Incorporated by Reference

    Science.gov (United States)

    2012-01-06

    ...: Determination of Coefficient of Friction of Test Surfaces,'' into Sec. 571.403. (d) ASTM International, 100 Barr...) ASTM D2515-66, ``Standard Specification for Kinematic Glass Viscometers,'' adopted 1966, into Sec. 571..., ``Standard Method for Inspection, Test, and Standardization of Etched-Stem Liquid-in-Glass Thermometers...

  18. A Criteria Standard for Conflict Resolution: A Vision for Guaranteeing the Safety of Self-Separation in NextGen

    Science.gov (United States)

    Munoz, Cesar; Butler, Ricky; Narkawicz, Anthony; Maddalon, Jeffrey; Hagen, George

    2010-01-01

    Distributed approaches for conflict resolution rely on analyzing the behavior of each aircraft to ensure that system-wide safety properties are maintained. This paper presents the criteria method, which increases the quality and efficiency of a safety assurance analysis for distributed air traffic concepts. The criteria standard is shown to provide two key safety properties: safe separation when only one aircraft maneuvers and safe separation when both aircraft maneuver at the same time. This approach is complemented with strong guarantees of correct operation through formal verification. To show that an algorithm is correct, i.e., that it always meets its specified safety property, one must only show that the algorithm satisfies the criteria. Once this is done, then the algorithm inherits the safety properties of the criteria. An important consequence of this approach is that there is no requirement that both aircraft execute the same conflict resolution algorithm. Therefore, the criteria approach allows different avionics manufacturers or even different airlines to use different algorithms, each optimized according to their own proprietary concerns.

  19. Interim radiological safety standards and evaluation procedures for subseabed high-level waste disposal

    Energy Technology Data Exchange (ETDEWEB)

    Klett, R.D.

    1997-06-01

    The Seabed Disposal Project (SDP) was evaluating the technical feasibility of high-level nuclear waste disposal in deep ocean sediments. Working standards were needed for risk assessments, evaluation of alternative designs, sensitivity studies, and conceptual design guidelines. This report completes a three part program to develop radiological standards for the feasibility phase of the SDP. The characteristics of subseabed disposal and how they affect the selection of standards are discussed. General radiological protection standards are reviewed, along with some new methods, and a systematic approach to developing standards is presented. The selected interim radiological standards for the SDP and the reasons for their selection are given. These standards have no legal or regulatory status and will be replaced or modified by regulatory agencies if subseabed disposal is implemented. 56 refs., 29 figs., 15 tabs.

  20. Interim radiological safety standards and evaluation procedures for subseabed high-level waste disposal

    International Nuclear Information System (INIS)

    Klett, R.D.

    1997-06-01

    The Seabed Disposal Project (SDP) was evaluating the technical feasibility of high-level nuclear waste disposal in deep ocean sediments. Working standards were needed for risk assessments, evaluation of alternative designs, sensitivity studies, and conceptual design guidelines. This report completes a three part program to develop radiological standards for the feasibility phase of the SDP. The characteristics of subseabed disposal and how they affect the selection of standards are discussed. General radiological protection standards are reviewed, along with some new methods, and a systematic approach to developing standards is presented. The selected interim radiological standards for the SDP and the reasons for their selection are given. These standards have no legal or regulatory status and will be replaced or modified by regulatory agencies if subseabed disposal is implemented. 56 refs., 29 figs., 15 tabs

  1. Developing Performance Cost Index Targets for ASHRAE Standard 90.1 Appendix G – Performance Rating Method - Rev.1

    Energy Technology Data Exchange (ETDEWEB)

    Rosenberg, Michael I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hart, Philip R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-03-01

    Appendix G, the Performance Rating Method in ASHRAE Standard 90.1 has been updated to make two significant changes for the 2016 edition, to be published in October of 2016. First, it allows Appendix G to be used as a third path for compliance with the standard in addition to rating beyond code building performance. This prevents modelers from having to develop separate building models for code compliance and beyond code programs. Using this new version of Appendix G to show compliance with the 2016 edition of the standard, the proposed building design needs to have a performance cost index (PCI) less than targets shown in a new table based on building type and climate zone. The second change is that the baseline design is now fixed at a stable level of performance set approximately equal to the 2004 code. Rather than changing the stringency of the baseline with each subsequent edition of the standard, compliance with new editions will simply require a reduced PCI (a PCI of zero is a net-zero building). Using this approach, buildings of any era can be rated using the same method. The intent is that any building energy code or beyond code program can use this methodology and merely set the appropriate PCI target for their needs. This report discusses the process used to set performance criteria for compliance with ASHRAE Standard 90.1-2016 and suggests a method for demonstrating compliance with other codes and beyond code programs.

  2. Developing Performance Cost Index Targets for ASHRAE Standard 90.1 Appendix G – Performance Rating Method

    Energy Technology Data Exchange (ETDEWEB)

    Rosenberg, Michael I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hart, Philip R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-16

    Appendix G, the Performance Rating Method in ASHRAE Standard 90.1 has been updated to make two significant changes for the 2016 edition, to be published in October of 2016. First, it allows Appendix G to be used as a third path for compliance with the standard in addition to rating beyond code building performance. This prevents modelers from having to develop separate building models for code compliance and beyond code programs. Using this new version of Appendix G to show compliance with the 2016 edition of the standard, the proposed building design needs to have a performance cost index (PCI) less than targets shown in a new table based on building type and climate zone. The second change is that the baseline design is now fixed at a stable level of performance set approximately equal to the 2004 code. Rather than changing the stringency of the baseline with each subsequent edition of the standard, compliance with new editions will simply require a reduced PCI (a PCI of zero is a net-zero building). Using this approach, buildings of any era can be rated using the same method. The intent is that any building energy code or beyond code program can use this methodology and merely set the appropriate PCI target for their needs. This report discusses the process used to set performance criteria for compliance with ASHRAE Standard 90.1-2016 and suggests a method for demonstrating compliance with other codes and beyond code programs.

  3. A comparison of safety and efficacy of cytotoxic versus molecularly targeted drugs in pediatric phase I solid tumor oncology trials.

    Science.gov (United States)

    Dorris, Kathleen; Liu, Chunyan; Li, Dandan; Hummel, Trent R; Wang, Xia; Perentesis, John; Kim, Mi-Ok; Fouladi, Maryam

    2017-03-01

    Prior reviews of phase I pediatric oncology trials involving primarily cytotoxic agents have reported objective response rates (ORRs) and toxic death rates of 7.9-9.6% and 0.5%, respectively. These data may not reflect safety and efficacy in phase I trials of molecularly targeted (targeted) drugs. A systematic review of pediatric phase I solid tumor trials published in 1990-2013 was performed. The published reports were evaluated for patient characteristics, toxicity information, and response numbers. A total of 143 phase I pediatric clinical trials enrolling 3,896 children involving 53 targeted and 48 cytotoxic drugs were identified. A meta-analysis demonstrated that the ORR is 2.1-fold higher with cytotoxic drugs (0.066 vs. 0.031 per subject; P = 0.007). By contrast, the pooled estimate of the stable disease rate (SDR) is similar for cytotoxic and targeted drugs (0.2 vs. 0.23 per subject; P = 0.27).  The pooled estimate of the dose-limiting toxicity rate is 1.8-fold larger with cytotoxic drugs (0.24 vs. 0.13 per subject; P = 0.0003). The hematologic grade 3-4 (G3/4) toxicity rate is 3.6-fold larger with cytotoxic drugs (0.43 vs. 0.12 per treatment course; P = 0.0001); however, the nonhematologic G3/4 toxicities and toxic deaths occur at similar rates for cytotoxic and targeted drugs. In phase I pediatric solid tumor trials, ORRs were significantly higher for cytotoxic versus targeted agents. SDRs were similar in targeted and cytotoxic drug trials. Patients treated with cytotoxic agents were more likely to experience hematologic G3/4 toxicities than those patients receiving targeted drugs. © 2016 Wiley Periodicals, Inc.

  4. Some safety studies of the MEGAPIE spallation source target performed using computational fluid dynamics

    International Nuclear Information System (INIS)

    Smith, B.L.

    2011-01-01

    Such a target forms part of the evolutionary Accelerator-Driven System (ADS) concept in which neutrons are generated in an otherwise sub-critical core by spallation reactions resulting from bombardment by a proton beam. The international project MEGAPIE had the objective of demonstrating the feasibility of the spallation process for a particular target design under strict test conditions. The test was carried over a period of four months at the end of 2006 at the SINQ facility of the Paul Scherrer Institute in Switzerland. The design studies carried out for the MEGAPIE target prior to irradiation using Computational Fluid Dynamics (CFD) resulted in an optimum flow configuration being defined for the coolant circulation. Simultaneously, stresses in the structural components were examined using Finite Element Method (FEM) techniques. To this purpose, an interface program was written which enabled different specialist groups to carry out the thermal hydraulics and structural mechanics analyses within the project with fully consistent model data. Results for steady-state operation of the target show that the critical lower target components are adequately cooled, and that stresses and displacements are well within tolerances. Transient analyses were also performed to demonstrate the robustness of the design in the event of abnormal operation, including pump failure and burn-through of the target casing by the proton beam. In the latter case, the CFD analyses complemented and extended full-scale tests. (author)

  5. 75 FR 17605 - Federal Motor Vehicle Safety Standards; Roof Crush Resistance

    Science.gov (United States)

    2010-04-07

    ... NHTSA needed to select the appropriate balance of safety benefits to added costs. We explained that... it is inequitable to those who travel in large vans and large sport utility vehicles (SUVs) for those... pickup trucks, vans and sport utility vehicles that have the capacity to seat three or more occupants...

  6. 76 FR 78 - Federal Motor Vehicle Safety Standard; Engine Control Module Speed Limiter Device

    Science.gov (United States)

    2011-01-03

    ... manufacturing, wear, and maintenance throughout the lifecycle of the vehicle. For example, the same diameter... information pertaining to the current fleet usage of these devices and the speed settings of the equipment... in commercial motor vehicles. This analysis is expected to include safety impacts as well as fuel and...

  7. 75 FR 66686 - Federal Motor Vehicle Safety Standards; Seat Belt Assembly Anchorages, School Bus Passenger...

    Science.gov (United States)

    2010-10-29

    ... Anchorages, School Bus Passenger Seating and Crash Protection AGENCY: National Highway Traffic Safety... published on October 21, 2008, which upgraded NHTSA's school bus passenger crash protection requirements.... We make clearer the procedure specifying how we will measure the height of school bus passenger torso...

  8. 76 FR 55829 - Federal Motor Vehicle Safety Standards; Electronic Stability Control Systems

    Science.gov (United States)

    2011-09-09

    ... Control Systems AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of.... Benefits of ESC Electronic stability control (ESC) systems use automatic computer- controlled braking of... as a four-wheel drive low- range transfer case, that does not control the ESC system directly but has...

  9. Enforcement of radiation safety standards and experience in the regulatory control of exposures

    International Nuclear Information System (INIS)

    Krishnamurthi, T.N.

    1997-01-01

    Regulatory provisions for radiation protection and their enforcement in India are discussed in this paper. The rules and regulations framed for radiation safety cover all the nuclear fuel cycle activities as well as the application of radiation sources in industrial, medical and research institutions. The enforcement aspects and experience in the control of exposures are presented. (author)

  10. 77 FR 22637 - Federal Motor Vehicle Safety Standards; Accelerator Control Systems

    Science.gov (United States)

    2012-04-16

    ... control (ETC) systems and also to include test procedures for hybrid vehicles and certain other vehicles..., in the case of an electric drive system, attenuate the electric current driving the vehicle... electrical disturbances. The agency has been carefully evaluating the safety of ETC systems through research...

  11. 77 FR 74144 - Federal Motor Vehicle Safety Standards; Event Data Recorders

    Science.gov (United States)

    2012-12-13

    ... Investigations Relating to Unintended Acceleration III. Proposal A. Overview 1. Overall Plan for Reviewing and... improve crash and defect investigation and crash data collection quality to assist safety researchers... recall of the vehicle to remedy the problem. The information obtained by manufacturers from EDRs aids...

  12. 78 FR 68748 - Federal Motor Vehicle Safety Standards; Designated Seating Positions

    Science.gov (United States)

    2013-11-15

    ... Volkswagen that sought additional lead time for implementing the new definition of ``designated seating... definition of the term, ``designated seating position,'' as used in the Federal motor vehicle safety... definition. The final rule made the new definition applicable to vehicles manufactured on and after September...

  13. Standard review plan for the review of safety analysis reports for nuclear power plants

    International Nuclear Information System (INIS)

    1984-04-01

    Revised information is presented concerning the stress analysis of engineered safety systems; control rod drive systems; reactor core isolation coding system; residual heat removal system; emergency core cooling system; station service water system; reactor auxiliary coding water systems; main steam supply system; and condensate and feedwater system

  14. Preliminary standard review guide for Environmental Restoration/Decontamination and Decommissioning safety analyses

    International Nuclear Information System (INIS)

    Ellingson, D.R.

    1993-06-01

    The review guide is based on the shared experiences, approaches, and philosophies of the Environmental Restoration/Decontamination and Decommissioning (ER/D ampersand D) subgroup members. It is presented in the form of a review guide to maximize the benefit to both the safety analyses practitioner and reviewer. The guide focuses on those challenges that tend to be unique to ER/D ampersand D cleanup activities. Some of these experiences, approaches, and philosophies may find application or be beneficial to a broader spectrum of activities such as terminal cleanout or even new operations. Challenges unique to ER/D ampersand D activities include (1) consent agreements requiring activity startup on designated dates; (2) the increased uncertainty of specific hazards; and (3) the highly variable activities covered under the broad category of ER/D ampersand D. These unique challenges are in addition to the challenges encountered in all activities; e.g., new and changing requirements and multiple interpretations. The experiences in approaches, methods, and solutions to the challenges are documented from the practitioner and reviewer's perspective, thereby providing the viewpoints on why a direction was taken and the concerns expressed. Site cleanup consent agreements with predetermined dates for restoration activity startup add the dimension of imposed punitive actions for failure to meet the date. Approval of the safety analysis is a prerequisite to startup. Actions that increase expediency are (1) assuring activity safety; (2) documenting that assurance; and (3) acquiring the necessary approvals. These actions increase the timeliness of startup and decrease the potential for punitive action. Improvement in expediency has been achieved by using safety analysis techniques to provide input to the line management decision process rather than as a review of line management decisions. Expediency is also improved by sharing the safety input and resultant decisions with

  15. Effect of the New York State cigarette fire safety standard on ignition propensity, smoke constituents, and the consumer market.

    Science.gov (United States)

    Connolly, G N; Alpert, H R; Rees, V; Carpenter, C; Wayne, G F; Vallone, D; Koh, H

    2005-10-01

    This study examines empirical evidence from the New York experience testing tobacco industry arguments made in opposition to fire safety standards for cigarettes. Percentages of cigarettes exhibiting full length burns (FLBs), cigarette sales before and following the implementation of the New York standards, a sample of retail cigarette prices, brand availability, and selected smoke constituent yields were compared between cigarettes sold in New York and two other states. Cigarette paper analysis was conducted on cigarettes sold in New York. New York cigarette brands averaged 10.0% FLBs as compared to 99.8% for California and Massachusetts brands. Reduced ignition propensity (RIP) appears to have been achieved by cigarette paper banding. Cigarette sales, prices, and brand availability do not appear to have been affected by the New York standards. Yields of the majority of smoke constituents tested did not differ substantially between RIP cigarettes sold in New York as compared to the same brands sold in Massachusetts. Average yields of tar, carbon monoxide, and two compounds were slightly higher, the yields of seven compounds were higher for one brand only, and nicotine was lower, among New York brands tested. RIP cigarette brands have been designed to meet the New York fire safety standards. Their introduction has not affected cigarette sales or prices in New York. There is no evidence that the small increases in smoke constituent yields affect the already highly toxic nature of cigarette smoke. Data on smoking caused fires, deaths, and injuries dating from after the change in law are not yet available. Such data will be able to address the question of whether the demonstrated reduced ignition standards are associated with reduced fires and injuries. Based on the New York experience, prior industry objections to producing RIP cigarettes are unfounded. Other states and nations should adopt similar standards.

  16. The Development of the Safety Related Valve Class 1E Electrical Motor, the Target and the Results

    International Nuclear Information System (INIS)

    Saban, I.; Grgic, D.; Fancev, T.; Flegar, Lj.; Novosel, N.

    1996-01-01

    The development of the safety related valves class 1E electric motor is described. The design implemented in order to satisfy the 1E requirements, and a way in which related 1E standards are addressed, are shown. The development was realized in three stages. In the first stage eight motorettes were made and the insulation system was tested. In the second stage the motor was produced in accordance with producer's prototype QA program. In the third stage part of the testing of the produced motor was made. The results of the testing, finished until now, show that produced motor, as well as similarly produced motors, is able to perform its safety function in the design bases accident conditions as requested by class 1E requirements. The rest of the testing (LOCA test) can be made on the same or similar motor in the future. (author)

  17. Revisions to the 2009 American Society of Clinical Oncology/Oncology Nursing Society chemotherapy administration safety standards: expanding the scope to include inpatient settings.

    Science.gov (United States)

    Jacobson, Joseph O; Polovich, Martha; Gilmore, Terry R; Schulmeister, Lisa; Esper, Peg; Lefebvre, Kristine B; Neuss, Michael N

    2012-01-01

    In November 2009, the American Society of Clinical Oncology (ASCO) and the Oncology Nursing Society (ONS) jointly published a set of 31 voluntary chemotherapy safety standards for adult patients with cancer, as the end result of a highly structured, multistakeholder process. The standards were explicitly created to address patient safety in the administration of parenteral and oral chemotherapeutic agents in outpatient oncology settings. In January 2011, a workgroup consisting of ASCO and ONS members was convened to review feedback received since publication of the standards, to address interim changes in practice, and to modify the standards as needed. The most significant change to the standards is to extend their scope to the inpatient setting. This change reflects the conviction that the same standards for chemotherapy administration safety should apply in all settings. The proposed set of standards has been approved by the Board of Directors for both ASCO and ONS and has been posted for public comment. Comments were used as the basis for final editing of the revised standards. The workgroup recognizes that the safety of oral chemotherapy usage, nononcology medication reconciliation, and home chemotherapy administration are not adequately addressed in the original or revised standards. A separate process, cosponsored by ASCO and ONS, will address the development of safety standards for these areas.

  18. Safety concept for spallation target system. JAERI/KEK joint project

    International Nuclear Information System (INIS)

    Kobayashi, K.; Kaminaga, M.; Haga, K.; Kinoshita, H.; Hino, R.

    2001-01-01

    A MW-class mercury target of the spallation target generates much larger amounts of radioactive nuclides than existing spallation neutron sources. To estimate the maximum level of public exposure under the guillotine break of mercury pipelines that is one of the major accidents of the target system, the hazard analyses were carried out by using a transportation model which considers heat transmission of mercury decay heat, diffusion of evaporated radioactive nuclides, etc. In the analyses, mercury, iodine, bromine and noble gas were selected as the effective source term because of their high vapor pressures and activation levels. From the preliminary analytical results obtained under the conservative conditions of 2 m/s of the air velocity around the mercury leakage area, the maximum level of the public exposure was approximately 5.8 x 10 -3 mSv. This level is negligible in comparison with 1 mSV one-year natural radiation exposure. (author)

  19. Comparative analysis of EU standards in food safety, environment, animal welfare and other non-trade concerns with some selected countries

    NARCIS (Netherlands)

    Wagenberg, van C.P.A.; Brouwer, F.M.; Hoste, R.; Rau, M.L.

    2012-01-01

    Standards for food safety, animal and plant health in Brazil, New Zealand and the USA are similar to those in the EU. Ukraine is in transition towards comparable standards. These topics are already incorporated in the framework of trade agreements. Standards for the environment, animal welfare and

  20. R&D for Safety Codes and Standards: Materials and Components Compatibility

    Energy Technology Data Exchange (ETDEWEB)

    San Marchi, Christopher W. [Sandia National Laboratories (SNL-CA), Livermore, CA (United States)

    2014-08-01

    A principal challenge to the widespread adoption of hydrogen infrastructure is the lack of quantifiable data on its safety envelope and concerns about additional risk from hydrogen. To convince regulatory officials, local fire marshals, fuel suppliers, and the public at large that hydrogen refueling is safe for consumer use, the risk to personnel and bystanders must be quantified and minimized to an acceptable level. Such a task requires strong confidence in the safety performance of high pressure hydrogen systems. Developing meaningful materials characterization and qualification methodologies in addition to enhancing understanding of performance of materials is critical to eliminating barriers to the development of safe, low-cost, high-performance high-pressure hydrogen systems for the consumer environment.

  1. PKPD modelling of PR and QRS intervals in conscious dogs using standard safety pharmacology data.

    Science.gov (United States)

    Bergenholm, Linnéa; Collins, Teresa; Evans, Neil D; Chappell, Michael J; Parkinson, Joanna

    2016-01-01

    Pharmacokinetic-pharmacodynamic (PKPD) modelling can improve safety assessment, but few PKPD models describing drug-induced QRS and PR prolongations have been published. This investigation aims to develop and evaluate PKPD models for describing QRS and PR effects in routine safety studies. Exposure and telemetry data from safety pharmacology studies in conscious beagle dogs were acquired. Mixed effects baseline and PK-QRS/PR models were developed for the anti-arrhythmic compounds AZD1305, flecainide, quinidine and verapamil and the anti-muscarinic compounds AZD8683 and AZD9164. RR interval correction and circadian rhythms were investigated for predicting baseline variability. Individual PK predictions were used to drive the pharmacological effects evaluating linear and non-linear direct and effect compartment models. Conduction slowing induced by the tested anti-arrhythmics was direct and proportional at low exposures, whilst time delays and non-linear effects were evident for the tested anti-muscarinics. AZD1305, flecainide and quinidine induced QRS widening with 4.2, 10 and 5.6% μM(-1) unbound drug. AZD1305 and flecainide also prolonged PR with 13.5 and 11.5% μM(-1). PR prolongations induced by the anti-muscarinics and verapamil were best described by Emax models with maximal effects ranging from 55 to 95%. RR interval correction and circadian rhythm improved PR but not QRS modelling. However, circadian rhythm had minor impact on estimated drug effects. Baseline and drug-induced effects on QRS and PR intervals can be effectively described with PKPD models using routine data, providing quantitative safety information to support drug discovery and development. Copyright © 2016 Elsevier Inc. All rights reserved.

  2. Is it time to reassess current safety standards for glyphosate-based herbicides?

    OpenAIRE

    Vandenberg, Laura N; Blumberg, Bruce; Antoniou, Michael N; Benbrook, Charles M; Carroll, Lynn; Colborn, Theo; Everett, Lorne G; Hansen, Michael; Landrigan, Philip J; Lanphear, Bruce P; Mesnage, Robin; vom Saal, Frederick S; Welshons, Wade V; Myers, John Peterson

    2017-01-01

    Use of glyphosate-based herbicides (GBHs) increased ?100-fold from 1974 to 2014. Additional increases are expected due to widespread emergence of glyphosate-resistant weeds, increased application of GBHs, and preharvest uses of GBHs as desiccants. Current safety assessments rely heavily on studies conducted over 30?years ago. We have considered information on GBH use, exposures, mechanisms of action, toxicity and epidemiology. Human exposures to glyphosate are rising, and a number of in vitro...

  3. Critical features of an auditable management system for an ISO 9000-compatible occupational health and safety standard.

    Science.gov (United States)

    Levine, S; Dyjack, D T

    1997-04-01

    An International Organization for Standardization (ISO) 9001: 1994-harmonized occupational health and safety (OHS) management system has been written at the University of Michigan, and reviewed, revised, and accepted under the direction of the American Industrial Hygiene Association (AIHA) Occupational Health and Safety Management Systems (OHSMS) Task Force and the Board of Directors. This system is easily adaptable to the ISO 14001 format and to both OHS and environmental management system applications. As was the case with ISO 9001: 1994, this system is expected to be compatible with current production quality and OHS quality systems and standards, have forward compatibility for new applications, and forward flexibility, with new features added as needed. Since ISO 9001: 1987 and 9001: 1994 have been applied worldwide, the incorporation of harmonized OHS and environmental management system components should be acceptable to business units already performing first-party (self-) auditing, and second-party (contract qualification) auditing. This article explains the basis of this OHS management system, its relationship to ISO 9001 and 14001 standards, the philosophy and methodology of an ISO-harmonized system audit, the relationship of these systems to traditional OHS audit systems, and the authors' vision of the future for application of such systems.

  4. Implementing new technologies for public safety communication: competing frequency demands and standardization issues

    Science.gov (United States)

    Stevens, Kathryn J.

    1997-01-01

    Attempting to incorporate new technology into an existing environment is often very difficult. The problems are lengthy to resolve, wrought with confusion and seldom turn out like anyone expected. This document represents an overview of one such attempt. It outlines the general areas of concern which could be affected by a transition, and potential problems that may be encountered as a result of the effort. Over the past several decades, many local, state and federal agencies are pressing for more efficient use of frequency spectrums. The urgency of this issue has grown due to the demands of several groups wanting access to these channels for commercial use. Pager systems, cellular telephones, radio systems for private businesses all demand more space. Public safety agencies are starting to fear their needs will diminish in importance as the available channel spectrums are consumed by commercial ventures. How to share these channels, purchase appropriate equipment to meet your needs, and stay within a reasonable budget are not easy tasks. Public safety agencies who rely on communication networks in the performance of their jobs also know why encryption is important. Protecting the rights of citizens as police exchange information over the air, maintaining the integrity of an investigation and officer safety are all concerns police must address each time they use a radio.

  5. Pre-clinical Safety and Off-Target Studies to Support Translation of AAV-Mediated RNAi Therapy for FSHD

    Directory of Open Access Journals (Sweden)

    Lindsay M. Wallace

    2018-03-01

    Full Text Available RNAi emerged as a prospective molecular therapy nearly 15 years ago. Since then, two major RNAi platforms have been under development: oligonucleotides and gene therapy. Oligonucleotide-based approaches have seen more advancement, with some promising therapies that may soon reach market. In contrast, vector-based approaches for RNAi therapy have remained largely in the pre-clinical realm, with limited clinical safety and efficacy data to date. We are developing a gene therapy approach to treat the autosomal-dominant disorder facioscapulohumeral muscular dystrophy. Our strategy involves silencing the myotoxic gene DUX4 using adeno-associated viral vectors to deliver targeted microRNA expression cassettes (miDUX4s. We previously demonstrated proof of concept for this approach in mice, and we are now taking additional steps here to assess safety issues related to miDUX4 overexpression and sequence-specific off-target silencing. In this study, we describe improvements in vector design and expansion of our miDUX4 sequence repertoire and report differential toxicity elicited by two miDUX4 sequences, of which one was toxic and the other was not. This study provides important data to help advance our goal of translating RNAi gene therapy for facioscapulohumeral muscular dystrophy.

  6. Applications of Dynamic Clamp to Cardiac Arrhythmia Research: Role in Drug Target Discovery and Safety Pharmacology Testing

    Directory of Open Access Journals (Sweden)

    Francis A. Ortega

    2018-01-01

    Full Text Available Dynamic clamp, a hybrid-computational-experimental technique that has been used to elucidate ionic mechanisms underlying cardiac electrophysiology, is emerging as a promising tool in the discovery of potential anti-arrhythmic targets and in pharmacological safety testing. Through the injection of computationally simulated conductances into isolated cardiomyocytes in a real-time continuous loop, dynamic clamp has greatly expanded the capabilities of patch clamp outside traditional static voltage and current protocols. Recent applications include fine manipulation of injected artificial conductances to identify promising drug targets in the prevention of arrhythmia and the direct testing of model-based hypotheses. Furthermore, dynamic clamp has been used to enhance existing experimental models by addressing their intrinsic limitations, which increased predictive power in identifying pro-arrhythmic pharmacological compounds. Here, we review the recent advances of the dynamic clamp technique in cardiac electrophysiology with a focus on its future role in the development of safety testing and discovery of anti-arrhythmic drugs.

  7. Appraisal for Brazil of the safety of the transport of radioactive material. Provision for the application of the IAEA safety standards

    International Nuclear Information System (INIS)

    2003-01-01

    Within the family of the United Nations, the IAEA has the specific statutory function of establishing standards of safety for the protection of health against exposure to ionizing radiation. As a result, in 1959 the United Nations Economic and Social Council requested that the IAEA be entrusted with the drafting of recommendations on the transport of radioactive substances.Within its statutory mandate and pursuant to this request, in 1961 the IAEA issued the Regulations for the Safe Transport of Radioactive Material (the Transport Regulations).The Transport Regulations have been periodically reviewed and, as appropriate, amended or revised. Moreover, several guides and technical documents supporting the Transport Regulations have been issued by the IAEA. The latest version of the Transport Regulations was issued in 2000 by the IAEA as publication TS-R-1 (ST-1, Revised). On 25 September 1998 the IAEA General Conference adopted resolution GC(42)/RES/13 on the Safety of Transport of Radioactive Materials. In adopting that resolution the General Conference recognized that - compliance with regulations which take account of the Agency's Transport Regulations is providing a high level of safety during the transport of radioactive materials. The IAEA's Statute also authorizes it to provide for the application of its standards at the request of any State.The IAEA discharges this statutory function through a number of mechanisms, including rendering independent peer review appraisal services to determine the status of compliance with its standards. Consistent with this statutory function, resolution GC(42)/RES/13 requested the IAEA Secretariat to provide for the application of the Transport Regulations by, inter alia, providing a service for carrying out, at the request of any State, an appraisal of the implementation of the Transport Regulations by that State. In response to this request, on 10 December 1998 the IAEA offered to render such an appraisal service to all

  8. The concepts of exclusion, exemption and clearance as used in the interagency basic safety standards and related IAEA documents

    International Nuclear Information System (INIS)

    Webbl, G.A.M.

    1997-01-01

    Mechanisms are needed to remove from regulatory control those exposures or radiation sources that do not warrant concern. In this paper three such conceptual mechanisms are examined from their historical development to their current usage in the Interagency Basic Safety Standards. These concepts are exclusion, applied to exposures that are not amenable to control, exemption applied in advance on the basis of low risks to prevent practices or sources from entering the regulatory control system, and clearance, a similar concept but used to remove sources from the regulatory control system. The application of and interrelationships between these concepts, is described. (author)

  9. On physics of the hydrogen plasticization and embrittlement of metallic materials, relevance to the safety and standards' problems

    International Nuclear Information System (INIS)

    Yury S Nechaev; Georgy A Filippov; T Nejat Veziroglu

    2006-01-01

    In the present contribution, some related fundamental problems of revealing micro mechanisms of hydrogen plasticization, superplasticity, embrittlement, cracking, blistering and delayed fracture of some technologically important industrial metallic materials are formulated. The ways are considered of these problems' solution and optimizing the technological processes and materials, particularly in the hydrogen and gas-petroleum industries, some aircraft, aerospace and automobile systems. The results are related to the safety and standardization problems of metallic materials, and to the problem of their compatibility with hydrogen. (authors)

  10. 76 FR 55056 - Toy Safety Standard: Strategic Outreach and Education Plan

    Science.gov (United States)

    2011-09-06

    ..., staff will target relevant trade publications, industry organizations, consumer groups, and others to... provisions before the requirements go into effect. We believe that issuing FAQs in a timely fashion will... industry trade shows, as funding permits, and make presentations about the new requirements. In addition...

  11. Safety effects of road design standards in Europe. Contribution to the International Symposium on Highway Geometric Design Practices, Session on Safety and Human Factors Considerations, Boston, Massachusetts, August 30 - September 1, 1995.

    NARCIS (Netherlands)

    Wegman, F.C.M. & Slop, M.

    1996-01-01

    This paper deals with the result of a study carried out for the European Commission by the SWOV Institute for Road Safety Research, in co-operation with a number of other European institutes, and which was reported in 1994. The title of the study is "Safety Effects of Road Design Standards." The

  12. Specific safety measures for emergency lanes and shoulders of motorways : a proposal for motorways' authorities in the framework of the European research project Safety Standards for Road Design and Redesign SAFESTAR, Workpackage 1.1.

    NARCIS (Netherlands)

    Braimaister, L.

    1999-01-01

    This workpackage is one of seven workpackages of the European SAFESTAR project, launched by DG VII. Directing on safety standards and recommendations for the Trans-European Roadway Network (TERN), the workpackage considered safety measures on emergency lanes (stopping strips), which are inherent

  13. A novel standard to evaluate the impact of therapeutic agents on patient safety – The BURDEN OF THERAPY™©∗

    Directory of Open Access Journals (Sweden)

    Ayad K. Abdulahad

    2016-12-01

    Conclusions: BOTh is a highly sensitive method to evaluate the comparative burden experienced by patients during treatment, and can facilitate better informed treatment selection. We propose BOTh as the new standard for analyzing safety during clinical studies.

  14. Acts, rules and standards for electrical installation with respect to safety

    International Nuclear Information System (INIS)

    Jayasuriya, C.; Karthikeyan, S.V.; Senthilkumar, B.; Shunmugam, U.; Kannan, S.E.

    1999-01-01

    An attempt has been made in this paper to highlight some of Acts, Rules and Standards (ARS) on electricity and discuss the spirit behind them. A brief about the content on electricity aspect in Non-electrical Acts and Rules is given. Salient features in Atomic Energy (Factories) Rules on electrical aspects are also dealt. The whole effort is to stress the professionals that it is not only enough to have a good knowledge on the requirements of Electrical Acts, Rules and Standards but also equally on the Non-Electrical Acts and Rules which will be an added advantage

  15. Comparison of the efficacy and safety of intensive-dose and standard-dose statin treatment for stroke prevention

    Science.gov (United States)

    Wang, Juan; Chen, Dan; Li, Da-Bing; Yu, Xin; Shi, Guo-Bing

    2016-01-01

    Abstract Background: Previous study indicated that high-dose statin treatment might increase the risk of hemorrhagic stroke and adverse reactions. We aim to compare the efficacy and safety of intensive-dose and standard-dose statin treatment for preventing stroke in high-risk patients. Methods: A thorough search was performed of multiple databases for publications from 1990 to June 2015. We selected the randomized clinical trials comparing standard-dose statin with placebo and intensive-dose statin with standard-dose statin or placebo for the prevention of stroke events in patients. Duplicate independent data extraction and bias assessments were performed. Data were pooled using a fixed-effects model or a random-effects model if significant heterogeneity was present. Results: For the all stroke incidences, intensive-dose statin treatment compared with placebo treatment and standard-dose statin treatment compared with placebo treatment showed a significant 21% reduction in relative risk (RR) (RR 0.79, 95% confidence interval (CI) [0.71, 0.87], P statin treatment compared with standard dose or placebo was effective reducing fatal stroke (RR 0.61, 95% CI [0.39, 0.96], P = 0.03) and the RR was 1.01 (95% CI [0.85, 1.20], P = 0.90) in standard-dose statin treatment compared with placebo. Conclusion: The results of this meta-analysis suggest that intensive-dose statin treatment might be more favorable for reducing the incidences of all strokes than standard-dose statin treatment, especially for patients older than 65 years in reducing the incidences of all stroke incidences. PMID:27684837

  16. Nuclear reactors. Use of the protection system for non-safety purposes (International Electrotechnical Commission Standard Publication 639:1979)

    International Nuclear Information System (INIS)

    Stefanik, J.

    1996-01-01

    This standard applies to the protection system of a nuclear reactor and, more especially, to all interconnections between a reactor protection system (as defined and explained in International Electrotechnical Commission Publication 231 A, first supplement to Publication 231, General Principles of Nuclear Reactor Instrumentation) and all other systems and equipment not part of the protection system, except: a) the physical connection between sensors of the protection system and the physical variables that they monitor, such as for example, thermo wells, moderating medium for neutron sensors, etc.; b) the electrical connection between the protection system and the reactor control rods or other safety mechanism; c) the electrical and pneumatic connections to the power distribution system (mains) and pneumatic supplies that supply power to the protection system. Although many clauses relate to all reactor protection systems, this standard applies mainly to protection systems in nuclear power reactors

  17. Safety Standard for Hydrogen and Hydrogen Systems: Guidelines for Hydrogen System Design, Materials Selection, Operations, Storage and Transportation. Revision

    Science.gov (United States)

    1997-01-01

    The NASA Safety Standard, which establishes a uniform process for hydrogen system design, materials selection, operation, storage, and transportation, is presented. The guidelines include suggestions for safely storing, handling, and using hydrogen in gaseous (GH2), liquid (LH2), or slush (SLH2) form whether used as a propellant or non-propellant. The handbook contains 9 chapters detailing properties and hazards, facility design, design of components, materials compatibility, detection, and transportation. Chapter 10 serves as a reference and the appendices contained therein include: assessment examples; scaling laws, explosions, blast effects, and fragmentation; codes, standards, and NASA directives; and relief devices along with a list of tables and figures, abbreviations, a glossary and an index for ease of use. The intent of the handbook is to provide enough information that it can be used alone, but at the same time, reference data sources that can provide much more detail if required.

  18. Impact resistance of materials for guards on cutting machine tools--requirements in future European safety standards.

    Science.gov (United States)

    Mewes, D; Trapp, R P

    2000-01-01

    Guards on machine tools are meant to protect operators from injuries caused by tools, workpieces, and fragments hurled out of the machine's working zone. This article presents the impact resistance requirements, which guards according to European safety standards for machine tools must satisfy. Based upon these standards the impact resistance of different guard materials was determined using cylindrical steel projectiles. Polycarbonate proves to be a suitable material for vision panels because of its high energy absorption capacity. The impact resistance of 8-mm thick polycarbonate is roughly equal to that of a 3-mm thick steel sheet Fe P01. The limited ageing stability, however, makes it necessary to protect polycarbonate against cooling lubricants by means of additional panes on both sides.

  19. Safety assessment and verification for nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2001-01-01

    verification' are used differently in different countries. The way that these terms have been used in this Safety Guide is explained in Section 2. The term 'design' as used here includes the specifications for the safe operation and management of the plant. This Safety Guide identifies the key recommendations for carrying out the safety assessment and the independent verification. It provides detailed guidance in support of IAEA, Safety of Nuclear Power Plants: Design, Safety Standards Series No. NS-R-1 (2000), particularly in the area of safety analysis. However, this does not include all the technical details which are available and reference is made to other IAEA publications on specific design issues and safety analysis methods. Specific deterministic or probabilistic safety targets or radiological limits can vary in different countries and are the responsibility of the regulatory body. This Safety Guide provides some references to targets and limits established by international organizations. Operators, and sometimes designers, may also set their own safety targets which may be more stringent than those set by the regulator or may address different aspects of safety. In some countries operators are expected to do this as part of their 'ownership' of the entire safety case. This Safety Guide does not include specific recommendations for the safety assessment of those plant systems for which dedicated Safety Guides exist. Section 2 defines the terms 'safety assessment', 'safety analysis' and 'independent verification' and outlines their relationship. Section 3 gives the key recommendations for the safety assessment of the principal and plant design requirements. Section 4 gives the key recommendations for safety analysis. It describes the identification of postulated initiating events (PIEs), which are used throughout the safety assessment including the safety analysis, the deterministic transient analysis and severe accident analysis, and the probabilistic safety analysis

  20. Equine allogeneic chondrogenic induced mesenchymal stem cells: A GCP target animal safety and biodistribution study.

    Science.gov (United States)

    Broeckx, S Y; Spaas, J H; Chiers, K; Duchateau, L; Van Hecke, L; Van Brantegem, L; Dumoulin, M; Martens, A M; Pille, F

    2017-12-27

    The safety of the intra-articular use of mesenchymal stem cells (MSCs) is scarcely reported. Therefore, the goal of this study was to investigate the safety of a single intra-articular injection with allogeneic chondrogenic induced MSCs combined with equine plasma (=the investigational product: IVP) compared to a saline (0.9% NaCl) placebo control (=control product: CP). Sixteen healthy experimental horses were randomly assigned to receive a single intra-articular injection with either the IVP (n=8) or the CP (n=8) in the left metacarpophalangeal joint. All horses underwent a daily clinical assessment throughout the entire study period of 42days to assess adverse events. Additionally, a local joint assessment and a lameness examination were performed daily during the first two weeks, and weekly the following 4weeks. Blood samples were taken weekly for hematological and biochemical analysis. At the end of the study period, horses of the IVP group were euthanized for a thorough necropsy and to check for biodistribution. Tissue samples of the injected joint were collected for histological examination. In both CP and IVP treated horses a mild transient subjective increase in periarticular temperature and lameness was noted after the intra-articular injection with no significant differences between the treatment groups. No distribution of the cells was found using immunohistochemistry and no ectopic tissue formation or signs of inflammation were found on histology. A single intra-articular injection of allogeneic chondrogenic induced MSCs combined with allogeneic plasma in horses had the same clinical side effects as an intra-articular injection with saline solution. Copyright © 2018 Elsevier Ltd. All rights reserved.

  1. Nordic Nuclear Safety Research 1994 - 2008: From standardized 4-year classics to customized R and B

    International Nuclear Information System (INIS)

    Bennerstedt, T.N.O.

    2011-10-01

    This is a presentation of NKS (Nordic Nuclear Safety Research), its work and achievements in the years 1994 - 2008, during which the author served as Nordic secretary and (later) as coordinator. NKS and the Nordic perspective are briefly introduced together with the NKS support structure, organization and administration: Owners, Board, Nordic secretary, Bureau and Secretariat. The author then embarks on a journey through the modern history of NKS work. The last two of the six fixed 4-year programs are described as regards planning, contents, project work, administration, dissemination of results, evaluations and conclusions. The trip continues to the land of R and B and the present (2011) structure of two general frameworks, namely, NKS-R: reactor safety, and NKS-B: emergency preparedness; each consisting of a set of flexible activities; hence, R and B. The reasoning behind this makeover is touched upon together with the new organization and simpler administration that developed. Major activities and the produced results are introduced and the evaluations summarized. The author's own conclusions and recommendations are followed by a short and subjective list of references. In a number of appendices some important background material has been compiled: bullet point versions of minutes of Owners Group and Board meetings; economic contributions and budgets; the NKS policy document; an overview of all NKS programs and evaluations; lists of R and B activities and funding; the author's personal remarks; a list of some NKS documents (other than technical reports and minutes); and a list of acronyms used in this report. (Author)

  2. 75 FR 31691 - Safety Standard for Infant Bath Seats: Final Rule

    Science.gov (United States)

    2010-06-04

    ... tilt. When the clamping fixtures and then the expected flexibility of the plastic used in the product..., and product. Without accurate usage data, it was not possible for CPSC staff to perform this analysis... will provide a demonstrable reduction of injury.'' The commenter noted that the ASTM standard was...

  3. 75 FR 81313 - Petitions for Modification of Existing Mandatory Safety Standards

    Science.gov (United States)

    2010-12-27

    ... Standards, Regulations and Variances at 202-693-9447 (Voice), [email protected] (E-mail), or 202-693...: (1) Establish two evaluation points for weekly evaluation of the affected area, located at break 42 and break 64 in the C-Mains panel to monitor air quality and quantity entering and exiting the...

  4. Vehicle safety performance improvements using a performance-based standards approach: four case studies

    CSIR Research Space (South Africa)

    Nordengen, Paul A

    2014-01-01

    Full Text Available As part of a performance-based standards (PBS) research programme for heavy vehicles in South Africa, a need was identified to design, manufacture and operate a number of PBS or Smart Truck demonstration vehicles. The purpose of the demonstration...

  5. 77 FR 71717 - Federal Motor Vehicle Safety Standards; Lamps, Reflective Devices, and Associated Equipment

    Science.gov (United States)

    2012-12-04

    ... standard prescribed under this chapter does not exempt a person from liability at common law.'' 49 U.S.C. 30103(e) Pursuant to this provision, State common law tort causes of action against motor vehicle... such State common law tort causes of action by virtue of NHTSA's rules, even if not expressly preempted...

  6. 78 FR 49996 - Pipeline Safety: Periodic Updates of Regulatory References to Technical Standards and...

    Science.gov (United States)

    2013-08-16

    ... transportation that allowed a fatigue crack to initiate along the seam of the longitudinal weld during transit... Pipe,'' API RP 5L1, as rail transportation has generally been considered to be the most likely source... standard will decrease the probability of fatigue cracking along the seam of the longitudinal weld during...

  7. 78 FR 11230 - Petitions for Modification of Application of Existing Mandatory Safety Standards

    Science.gov (United States)

    2013-02-15

    ... Request: The petitioner requests a modification of the existing standard to permit the use of cross... portions of the map illegible. 2. The use of cross-sections in lieu of contour lines has been practiced..., and half-mask fit-tested respirator (disposable or reusable) that meets or exceeds the minimum...

  8. 77 FR 73354 - Safety Standard for Hand-Held Infant Carriers

    Science.gov (United States)

    2012-12-10

    ... 10 from horizontal), which sits directly on the floor, without legs or a stand, and has hand-holds or... standing near the infant carrier in any one position around the carrier but not necessarily visible from... standard CAMI, Mark II 6- month infant dummy during the lift test. When we tested one carrier, the CAMI...

  9. 78 FR 13089 - Petitions for Modification of Application of Existing Mandatory Safety Standards

    Science.gov (United States)

    2013-02-26

    ... Wilson Boulevard, Room 2350, Arlington, Virginia 22209-3939, Attention: George F. Triebsch, Director... modification. II. Petitions for Modification Docket No: M-2013-005-C. Petitioner: Peabody Midwest Mining, LLC... standard. Docket Number: M-2013-006-C. Petitioner: Peabody Midwest Mining, LLC, Three Gateway Center, Suite...

  10. 78 FR 59723 - Petitions for Modification of Application of Existing Mandatory Safety Standards

    Science.gov (United States)

    2013-09-27

    ... standard to a coal or other mine if the Secretary of Labor determines that: 1. An alternative method of... miners in active mines and to protect miners in future mines that may mine in close proximity to these same active mines, it is necessary to determine the exact location and extent of the mine workings. (2...

  11. 77 FR 19155 - Federal Motor Vehicle Safety Standards; Seat Belt Assembly Anchorages; Incorporation by Reference

    Science.gov (United States)

    2012-03-30

    ... Participation I. FMVSS No. 210 FMVSS No. 210, ``Seat belt assembly anchorages,'' applies to passenger cars, multipurpose passenger vehicles (MPVs), trucks, and buses. The standard establishes requirements for seat belt.... 210 and Figure 2 in FMVSS No. 222, ``School bus passenger seating and crash protection''). \\1\\ For lap...

  12. 75 FR 21567 - Federal Motor Vehicle Safety Standard No. 108; Lamp, Reflective Devices and Associated Equipment...

    Science.gov (United States)

    2010-04-26

    ... the motorcycle headlighting system location requirements for a single headlamp with multiple light sources. The current standard requires that the light sources contained in a single motorcycle headlamp containing multiple light sources be located on the vertical centerline of the vehicle or horizontally...

  13. Radiofrequency/Microwave Radiation Biological Effects and Safety Standards: A Review

    Science.gov (United States)

    1994-06-01

    minimum exposure levels sufficient to cause ocular damage are not certain [301. In 1970, Zaret, Kaplan and Kay (reference found in [30]) reported a...levels are not intended to apply to the medical treatment of patients where irradiation is sometimes useful in combating diseases lik cima ’. The standard

  14. 76 FR 37831 - Petitions for Modification of Application of Existing Mandatory Safety Standards

    Science.gov (United States)

    2011-06-28

    ... underground Shop Pad and integral air compressors on mobile equipment. A Cambel Hausfield-1 CFM pancake air... the miner's use in an emergency. According to MSHA's underground coal mine standards, a minimum 2.25... using continuous mining equipment, drivage sights will be installed at the last open crosscut near the...

  15. 77 FR 50166 - Petitions for Modification of Application of Existing Mandatory Safety Standards

    Science.gov (United States)

    2012-08-20

    ... Request: The petitioner requests a modification of the existing standard for underground coal mines to... or underground areas of a coal mine, and establishing and maintaining barriers around the wells, to... loaded. (6) Prior to the shift of mining through the well, equipment will be checked for permissibility...

  16. 76 FR 23255 - Federal Motor Vehicle Safety Standards; Lamps, Reflective Devices, and Associated Equipment

    Science.gov (United States)

    2011-04-26

    ... subpart S6.6.3 (License Plate Holder) of the final rule. FOR FURTHER INFORMATION CONTACT: For technical...). Among other requirements, SAE Standard J587 states in paragraph 6.1 that ``the angle between the plane... purpose of ensuring an objective means of measuring photometric performance, but not intended to be a...

  17. 77 FR 70914 - Federal Motor Vehicle Safety Standards; Side Impact Protection

    Science.gov (United States)

    2012-11-28

    ...). * * * * * (j) Measure and set the dummy's pelvic angle using the pelvic angle gauge. The angle is set to 20.0... CONTACT: For non-legal issues, you may call Louis N. Molino, NHTSA Office of Crashworthiness Standards...)(10), the instruction that was in S12.3.3(a)(9) and S12.3.4(h) (to `minimize the angle') [emphasis...

  18. Fundamentals of automotive and engine technology standard drives, hybrid drives, brakes, safety systems

    CERN Document Server

    2014-01-01

    Hybrid drives and the operation of hybrid vehicles are characteristic of contemporary automotive technology. Together with the electronic driver assistant systems, hybrid technology is of the greatest importance and both cannot be ignored by today’s car drivers. This technical reference book provides the reader with a firsthand comprehensive description of significant components of automotive technology. All texts are complemented by numerous detailed illustrations. Contents History of the automobile.- History of the Diesel engine.- Areas of use for Diesel engines.- Basic principles of the Diesel engine.- Basic principles of Diesel fuel-injection.- Basic principles of the gasoline engine.- Inductive ignition system.- Transmissions for motor vehicles.- Motor vehicle safety.- Basic principles of vehicle dynamics.- Car braking systems.- Vehicle electrical systems.- Overview of electrical and electronic systems in the vehicle.- Control of gasoline engines.- Control of Diesel engines.- Lighting technology.- Elec...

  19. Nordic Nuclear Safety Research 1994 - 2008: From standardized 4-year classics to customized R and B

    Energy Technology Data Exchange (ETDEWEB)

    Bennerstedt, T.N.O. (TeknoTelje HB, Torhamn (Sweden))

    2011-10-15

    This is a presentation of NKS (Nordic Nuclear Safety Research), its work and achievements in the years 1994 - 2008, during which the author served as Nordic secretary and (later) as coordinator. NKS and the Nordic perspective are briefly introduced together with the NKS support structure, organization and administration: Owners, Board, Nordic secretary, Bureau and Secretariat. The author then embarks on a journey through the modern history of NKS work. The last two of the six fixed 4-year programs are described as regards planning, contents, project work, administration, dissemination of results, evaluations and conclusions. The trip continues to the land of R and B and the present (2011) structure of two general frameworks, namely, NKS-R: reactor safety, and NKS-B: emergency preparedness; each consisting of a set of flexible activities; hence, R and B. The reasoning behind this makeover is touched upon together with the new organization and simpler administration that developed. Major activities and the produced results are introduced and the evaluations summarized. The author's own conclusions and recommendations are followed by a short and subjective list of references. In a number of appendices some important background material has been compiled: bullet point versions of minutes of Owners Group and Board meetings; economic contributions and budgets; the NKS policy document; an overview of all NKS programs and evaluations; lists of R and B activities and funding; the author's personal remarks; a list of some NKS documents (other than technical reports and minutes); and a list of acronyms used in this report. (Author)

  20. A Methodological Framework for Software Safety in Safety Critical Computer Systems

    OpenAIRE

    P. V. Srinivas Acharyulu; P. Seetharamaiah

    2012-01-01

    Software safety must deal with the principles of safety management, safety engineering and software engineering for developing safety-critical computer systems, with the target of making the system safe, risk-free and fail-safe in addition to provide a clarified differentaition for assessing and evaluating the risk, with the principles of software risk management. Problem statement: Prevailing software quality models, standards were not subsisting in adequately addressing the software safety ...

  1. Ensuring safety of fuel cell applications and hydrogen refuelling. Legislation and standards; Polttokennosovellusten ja vetytankkauksen turvallisuuden varmistaminen. Saeaedoeksiae ja standardeja

    Energy Technology Data Exchange (ETDEWEB)

    Nissila, M.; Sarsama, J.

    2013-09-15

    Fuel cell technology is considered a promising alternative in terms of viable energy systems. The advantages of fuel cell systems include a good efficiency rate and the lack of harmful environmental emissions. Factors which may slow down the commercialisation of fuel cell technology, e.g. fuel cell vehicles, include the high price of hydrogen and the insufficiency of the infrastructure required for the distribution of hydrogen. A large proportion of major car manufacturers are committed to introducing fuel cell cars to the market by 2014-2016. In order to ensure a successful market introduction of fuel cell vehicles, this has to be aligned with the development of the necessary hydrogen infrastructure. In the early commercialisation stages of a new technology, it is important to give the public correct, justified and understandable information on the safety of the fuel cell applications, and also on the measures taken to ensure the safety of applications. A lack of necessary information, inaccurate perceptions and prejudices can have an adverse effect on the public acceptance of fuel cell applications. Hazards and potential accidents related to fuel cell systems are mainly associated with the flammable substances (e.g. hydrogen, methane) used as fuel, the high pressure of hydrogen, electrical hazards, and dangers concerning technical systems in general. The fuel cell applications reviewed in this publication are transport applications and stationary applications and the refuelling system of gaseous hydrogen. The publication concentrates on fuel cells using hydrogen as fuel. The publication gives an overview of how EU-legislation (mainly various directives) and Finnish legislation applies to fuel cell systems and applications, and what kind of safety requirements the legislation sets. In addition, a brief overview of safety standards concerning fuel cell systems and hydrogen refuelling is presented. (orig.)

  2. Global Positioning and Inertial Measurements Range Safety Tracking Systems Commonality Standard

    Science.gov (United States)

    2011-02-01

    requalification test series may be needed to recharacterize RTS performance. Paragraphs A2.1 (b)(c)(d) allow alternative methods to the standard...subjected to some level of electrical functional requalification testing to demonstrate that component performance has not changed. Environmental...level of requalification testing can only validate the environmental survivability of a component with added piece- parts. The extent of testing

  3. On the road toward the development of clothing size standards and safety devices for Chilean workers.

    Science.gov (United States)

    Oñate, Esteban; Meyer, Felipe; Espinoza, Jorge

    2012-01-01

    The range of sizes used in Chile for clothing comes from criteria developed in continental Europe, mainly the EN 13402 standard. Any standard adopted by a country should consider the anthropometric dimensions of the user population, particularly to discern the ratio of garments for different size. Consequently, the purpose of this study was to propose standards for the size of clothing based on anthropometric characteristics of a sample of Chilean miners. The study was conducted in 447 male workers. The age and body weight were measured in each workers as well as their percentage of body fat. Anthropometric measurements for garments were made according to the criteria of the European Community (EN 13402-1) and ISO (8559- 1989). Body dimensions for the design of gloves, shoes, helmets and caps, clothes that cover the upper part of the body and clothes that cover the lower part were measured. The results obtained made it possible to establish the percentage of workers falling within the range of sizes that manufacturers consider as reference. One of the main conclusions of the study is the need to carefully consider a set of complementary anthropometric measures, which can help to improve the comfort of costumes, to the extent that the providers adapt their designs to the characteristics of Chilean workers.

  4. Safety and efficacy of targeted hyperthermia treatment utilizing gold nanorod therapy in spontaneous canine neoplasia.

    Science.gov (United States)

    Schuh, Elizabeth M; Portela, Roberta; Gardner, Heather L; Schoen, Christian; London, Cheryl A

    2017-10-02

    Hyperthermia is an established anti-cancer treatment but is limited by tolerance of adjacent normal tissues. Parenteral administration of gold nanorods (NRs) as a photosensitizer amplifies the effects of hyperthermia treatment while sparing normal tissues. This therapy is well tolerated and has demonstrated anti-tumor effects in mouse models. The purpose of this phase 1 study was to establish the safety and observe the anti-tumor impact of gold NR enhanced (plasmonic) photothermal therapy (PPTT) in client owned canine patients diagnosed with spontaneous neoplasia. Seven dogs underwent gold NR administration and subsequent NIR PPTT. Side effects were mild and limited to local reactions to NIR laser. All of the dogs enrolled in the study experienced stable disease, partial remission or complete remission. The overall response rate (ORR) was 28.6% with partial or complete remission of tumors at study end. PPTT utilizing gold nanorod therapy can be safely administered to canine patients. Further studies are needed to determine the true efficacy in a larger population of canine cancer patients and to and identify those patients most likely to benefit from this therapy.

  5. SAFETY

    CERN Multimedia

    C. Schaefer and N. Dupont

    2013-01-01

      “Safety is the highest priority”: this statement from CERN is endorsed by the CMS management. An interpretation of this statement may bring you to the conclusion that you should stop working in order to avoid risks. If the safety is the priority, work is not! This would be a misunderstanding and misinterpretation. One should understand that “working safely” or “operating safely” is the priority at CERN. CERN personnel are exposed to different hazards on many levels on a daily basis. However, risk analyses and assessments are done in order to limit the number and the gravity of accidents. For example, this process takes place each time you cross the road. The hazard is the moving vehicle, the stake is you and the risk might be the risk of collision between both. The same principle has to be applied during our daily work. In particular, keeping in mind the general principles of prevention defined in the late 1980s. These principles wer...

  6. SAFETY

    CERN Multimedia

    M. Plagge, C. Schaefer and N. Dupont

    2013-01-01

    Fire Safety – Essential for a particle detector The CMS detector is a marvel of high technology, one of the most precise particle measurement devices we have built until now. Of course it has to be protected from external and internal incidents like the ones that can occur from fires. Due to the fire load, the permanent availability of oxygen and the presence of various ignition sources mostly based on electricity this has to be addressed. Starting from the beam pipe towards the magnet coil, the detector is protected by flooding it with pure gaseous nitrogen during operation. The outer shell of CMS, namely the yoke and the muon chambers are then covered by an emergency inertion system also based on nitrogen. To ensure maximum fire safety, all materials used comply with the CERN regulations IS 23 and IS 41 with only a few exceptions. Every piece of the 30-tonne polyethylene shielding is high-density material, borated, boxed within steel and coated with intumescent (a paint that creates a thick co...

  7. Acucise™ endopyelotomy in a porcine model: procedure standardization and analysis of safety and immediate efficacy

    Directory of Open Access Journals (Sweden)

    Andreoni Cássio

    2004-01-01

    Full Text Available PURPOSE: The study here presented was done to test the technical reliability and immediate efficacy of the Acucise device using a standardized technique. MATERIALS AND METHODS: 56 Acucise procedures were performed in pigs by a single surgeon who used a standardized technique: insert 5F angiographic catheter bilaterally up to the midureter, perform retrograde pyelogram, Amplatz super-stiff guidewire is advanced up to the level of the renal pelvis, angiographic catheters are removed, Acucise catheter balloon is advanced to the ureteropelvic junction (UPJ level, the super-stiff guide-wire is removed and the contrast medium in the renal pelvis is aspirated and replaced with distilled water, activate Acucise at 75 watts of pure cutting current, keep the balloon fully inflated for 10 minutes, perform retrograde ureteropyelogram to document extravasation, remove Acucise catheter and pass an ureteral stent and remove guide-wire. RESULTS: In no case did the Acucise device present malfunction. The electrocautery activation time was 2.2 seconds (ranging from 2 to 4 seconds. The extravasation of contrast medium, visible by fluoroscopy, occurred in 53 of the 56 cases (94.6%. In no case there was any evidence of intraoperative hemorrhage. CONCLUSIONS: This study revealed that performing Acucise endopyelotomy routinely in a standardized manner could largely preclude intraoperative device malfunction and eliminate complications while achieving a successful incision in the UPJ. With the guidelines that were used in this study, we believe that Acucise endopyelotomy can be completed successfully and safely in the majority of selected patients with UPJ obstruction.

  8. IAEA report on the Fukushima-Daiichi accident and safety standards

    International Nuclear Information System (INIS)

    Mizumachi, Wataru

    2011-01-01

    On March 11th, 2011, 4th largest earthquake attacked Fukushima Nuclear Power Plant and around one hour later, the enormous Tsunami attacked it also. After the large earthquake attacked, the automatic shutdown was performed and the emergency diesel generators automatically started and Isolation condenser cooled down the core for unit 1 and RCIC cooled down the cores for unit 2 and 3. However, the large Tsunami damaged all emergency diesel generators and all ECCS pumps. The core melted and the hydrogen gas were generated by the steam and the zircaloy reaction. The hydrogen leaked into the reactor building and then the reactor building blasted by the hydrogen. IAEA has organized the Great East Japan Earthquake Expert Mission on Fukushima-daiichi accident and they reported to the formal meeting in the headquater in Viena. They made 15 conclusions and 16 lessons and learned. IAEA chairman officially summarized 28 recommendations from them. USNRC published 'Recommendations for Enhanuing Reactor Safety in the 21st Century 'where they summarized 12 Recommendations on Fukushima Accident. Here is the summary of these recommendations. (author)

  9. Targeting safety improvements through identification of incident origination and detection in a near-miss incident learning system

    International Nuclear Information System (INIS)

    Novak, Avrey; Nyflot, Matthew J.; Ermoian, Ralph P.; Jordan, Loucille E.; Sponseller, Patricia A.; Kane, Gabrielle M.; Ford, Eric C.; Zeng, Jing

    2016-01-01

    during the documentation of patient positioning and localization of the patient. Incidents were most frequently detected during treatment delivery (30%), and incidents identified at this point also had higher severity scores than other workflow areas (NMRI = 1.6). Incidents identified during on-treatment quality management were also more severe (NMRI = 1.7), and the specific process steps of reviewing portal and CBCT images tended to catch highest-severity incidents. On average, safety barriers caught 46% of all incidents, most frequently at physics chart review, therapist’s chart check, and the review of portal images; however, most of the incidents that pass through a particular safety barrier are not designed to be capable of being captured at that barrier. Conclusions: Incident learning systems can be used to assess the most common points of error origination and detection in radiation oncology. This can help tailor safety improvement efforts and target the highest impact portions of the workflow. The most severe near-miss events tend to originate during simulation, with the most severe near-miss events detected at the time of patient treatment. Safety barriers can be improved to allow earlier detection of near-miss events.

  10. Targeting safety improvements through identification of incident origination and detection in a near-miss incident learning system

    Energy Technology Data Exchange (ETDEWEB)

    Novak, Avrey; Nyflot, Matthew J.; Ermoian, Ralph P.; Jordan, Loucille E.; Sponseller, Patricia A.; Kane, Gabrielle M.; Ford, Eric C.; Zeng, Jing, E-mail: jzeng13@uw.edu [Department of Radiation Oncology, University of Washington Medical Center, 1959 NE Pacific Street, Campus Box 356043, Seattle, Washington 98195 (United States)

    2016-05-15

    during the documentation of patient positioning and localization of the patient. Incidents were most frequently detected during treatment delivery (30%), and incidents identified at this point also had higher severity scores than other workflow areas (NMRI = 1.6). Incidents identified during on-treatment quality management were also more severe (NMRI = 1.7), and the specific process steps of reviewing portal and CBCT images tended to catch highest-severity incidents. On average, safety barriers caught 46% of all incidents, most frequently at physics chart review, therapist’s chart check, and the review of portal images; however, most of the incidents that pass through a particular safety barrier are not designed to be capable of being captured at that barrier. Conclusions: Incident learning systems can be used to assess the most common points of error origination and detection in radiation oncology. This can help tailor safety improvement efforts and target the highest impact portions of the workflow. The most severe near-miss events tend to originate during simulation, with the most severe near-miss events detected at the time of patient treatment. Safety barriers can be improved to allow earlier detection of near-miss events.

  11. Surfacing safety hazards using standardized operating room briefings and debriefings at a large regional medical center.

    Science.gov (United States)

    Bandari, Jathin; Schumacher, Kathy; Simon, Michelle; Cameron, Danielle; Goeschel, Christine A; Holzmueller, Christine G; Makary, Martin A; Welsh, Robert J; Berenholtz, Sean M

    2012-04-01

    Briefings and debriefings, previously shown to be a practical and feasible strategy to improve interdisciplinary communication and teamwork in the operating room (OR), was then assessed as a strategy to prospectively surface clinical and operational defects in surgical care--and thereby prevent patient harm. A one-page, double-sided briefing and debriefing tool was used by surgical teams during cases at the William Beaumont Hospital Royal Oak (Royal Oak, Michigan) campus to surface clinical and operational defects during the study period (October 2006-May 2010). Defects were coded into six categories (with each category stratified by briefing or debriefing period) during the first six months, and refinement of coding resulted in expansion to 16 defect categories and no further stratification. A provider survey was used in January 2008 to interview a sample of 40 caregivers regarding the perceived effectiveness of the tool in surfacing defects. The teams identified a total of 6,202 defects--an average of 141 defects per month--during the entire study period. Of 2,760 defects identified during the six-defect coding period, 1,265 (46%) surfaced during briefings, and the remaining 1,495 (54%) during debriefings. Equipment (48%) and communication (31%) issues were most prominent. Of 3,442 defects identified during the 16-defect coding period, the most common were Central Processing Department (CPD) instrumentation (22%) and Communication/Safety (15%). Overall, 70 (87%) of the 80 responses were in agreement that briefings were effective for surfacing defects, as were 59 (76%) of the 78 responses for debriefings. Briefings and debriefings were a practical and effective strategy to surface potential surgical defects in the operating rooms of a large medical center.

  12. Safety of Brucella abortus strain RB51 vaccine in non-target ungulates and coyotes.

    Science.gov (United States)

    Kreeger, Terry J; DeLiberto, Thomas J; Olsen, Steven C; Edwards, William H; Cook, Walter E

    2002-07-01

    Brucellosis is endemic in free-ranging elk (Cervus elaphus) and bison (Bison bison) in the Greater Yellowstone Area (GYA; USA). It is possible that an oral brucellosis vaccine could be developed and disseminated in the GYA to reduce disease transmission. Should this occur, non-target species other than elk and bison may come in contact with the vaccine resulting in morbidity or mortality. To assess biosafety, bighorn sheep (Ovis canadensis; n = 10), pronghorn (Antilocapra americana; n = 9), mule deer (Odocoileus hemionus; n = 11), moose (Alces alces shirasi; n = 10), and coyotes (Canis latrans; n = 24) were given a single oral dose of at least 1.0 x 10(10) colony-forming units of Brucella abortus strain RB51 vaccine (RB51). Animals were randomly divided into vaccinated and control groups. Ungulates were captured, blood sampled, and swabs taken from the nares, rectum, and vagina for bacterial culture on day 0, 42, and 84 post-inoculation (PI). On day 42, the vaccinated group became a control group and vice versa in a crossover design. Blood and swab samples were taken from coyotes on days 0, 14, 28, and 42 PI. There was no crossover for the coyote study. Two coyotes from each group were also euthanized and cultured for RB51 on days 42, 84, 168, and 336 PI. Blood samples were analyzed for hematologic changes and antibodies to RB51 using a modified dot-blot assay. No morbidity or mortality as a result of vaccination was observed in any animal. There were no differences in hematologic parameters at any time for ungulate species; vaccinated coyotes had higher hematocrit, hemoglobin, and eosinophil counts (P RB51. Strain RB51 was cultured from oropharyngeal lymph nodes from one coyote 42 days PI and from a moose 117 days PI. This study suggested that a single oral dose of RB51 was safe in these species.

  13. Preclinical safety studies of 213BI labeled PA12 for targeted alpha therapy of cancer

    International Nuclear Information System (INIS)

    Rizvi, S.M.A.; Song, E.Y.; Qu, C.F.; Raja, C.; Allen, B.J.; Morgenstern, A.; Apostolidis, C.

    2006-01-01

    Full text: The urokinase plasminogen activator (uPA) system is involved in cancer growth and metastasis. The plasminogen activator inhibitor type 2 (PA I2 ) and uPA can form a stable complex, which is bound to the cell surface uPA receptor (uPAR). We labeled PA I2 with 213 Bi to form the alpha conjugate. This conjugate targets uPA/uPAR and has been found to have promising therapeutic properties for breast, prostate and pancreatic cancer. This paper reports studies of the acute and delayed toxicity in mice; the effect of lysine renal protection; pharmacokinetics; a comparison of CHX-A - DTPA and cDTPA chelators, and in vivo 213 Bi-PA I2 stability by Ca-DTPA challenge. Pharmacokinetics of 213 Bi-PA I2 in nude mice demonstrated that the kidneys were the critical organs for retention of Bismuth in the chelate complex. The CHX-A - DTPA and cDTPA immunoconjugates were found to have similar percent I D/kg in the kidney, with no significant retention of Bi evident in other organs such as liver, heart, lung, and spleen. Ca-DTPA chelators significantly reduced the renal 213 Bi accumulation at 15 minutes, not for 30 and 120 minutes, indicating high in vivo stability of 213 Bi-PA I2 and the need for pre-injection purification of conjugates. The acute toxicity limit by weight loss was more than 450 MBq/kg. Mild to moderate, patchy tubular necrosis was observed accompanied by slight urea increase. Radiation nephritis was the source of lethal delayed toxicity arising at 20 - 30 weeks post-treatment, for which the maximum tolerance dose was 110 MBq/kg. Kidney uptake was not significantly decreased by lysine at 185 MBq/kg, nor was there any change in delayed toxicity

  14. In-vivo dermal pharmacokinetics, efficacy, and safety of skin targeting nanoparticles for corticosteroid treatment of atopic dermatitis.

    Science.gov (United States)

    Siddique, Muhammad Irfan; Katas, Haliza; Amin, Mohd Cairul Iqbal Mohd; Ng, Shiow-Fern; Zulfakar, Mohd Hanif; Jamil, Adawiyah

    2016-06-30

    The objective of this study was to investigate the in-vivo behavior of topically applied cationic polymeric chitosan nanoparticles (CSNPs) loaded with anti-inflammatory (hydrocortisone, HC) and antimicrobial (hydroxytyrosol, HT) drugs, to elucidate their skin targeting potential for the treatment of atopic dermatitis (AD). Compared to the commercial formulation, the HC-HT loaded CSNPs showed significantly improved drug penetration into the epidermal and dermal layers of albino Wistar rat skin without saturation. Dermal pharmacokinetic of CSNPs with a size of 228.5±7nm and +39±5mV charges revealed that they penetrated 2.46-fold deeper than the commercial formulation did, and had greater affinity at the skin target site without spreading to the surrounding tissues, thereby providing substantial safety benefits. In repeated dermal application toxicity studies, the HC-HT CSNPs showed no evidence of toxicity compared to the commercial formulation, which induced skin atrophy and higher liver enzyme levels. In conclusion, the positively charged HC-HT CSNP formulation exhibited promising local delivery and virtually no treatment-related toxicities, suggesting it may be an efficient and viable alternative for commercially available AD treatments. Copyright © 2016 Elsevier B.V. All rights reserved.

  15. Nuclear cooperation targets global challenges. States back main pillars of the IAEA's work to strengthen nuclear safety, verification and technology transfer

    International Nuclear Information System (INIS)

    2000-01-01

    States meeting at the 44th IAEA General Conference in Vienna have set a challenging agenda for international nuclear cooperation into the 21st century that targets issues of global safety, security, and sustainable development. They adopted resolutions endorsing the Agency's programmes for strengthening activities under its three main pillars of work - nuclear verification, safety, and technology - that are closely linked to major challenges before the world. The document presents the main actions taken during the conference

  16. A national scan of employment standards, occupational health and safety and workers' compensation resources for new immigrants to Canada.

    Science.gov (United States)

    Kosny, Agnieszka A; Lifshen, Marni E

    2012-01-01

    The burden of work injuries in Canada is a serious public health concern. Nearly one million Canadian workers experienced nonfatal injuries that led to time off work in 2005. New employees and recent immigrants are more likely to experience a work-related injury. The purpose of this study was to examine services, programs and resources available to newcomers to Canada that focus on employment standards (ES), occupational health & safety (OHS) and workers' compensation (WC). We reviewed resources available through community organizations, employers, settlement groups and unions, as well as provincial and federal prevention agencies and workers' compensation boards. The materials were categorized according to geographical distribution, content, resource type, audience and language. We found a total of 224 resources that met our search criteria. The greatest numbers were found in the provinces of Ontario, British Columbia and Manitoba. Most resources consisted of short factsheets on the topic of ES; WC was the focus of the fewest resources. The most comprehensive resources were teaching materials for ESL/FSL classes and Job Search Workshops. Most resources were specifically produced for newcomers but only available in French/English. Our scan uncovered no information for health care providers, union representatives or safety professionals working with immigrants. Very few resources were aimed at young immigrant workers or employers working with newcomers. Our research identifies gaps in the provision of health and safety resources for newcomers. Additional research is needed to evaluate the depth and quality of materials and to determine how decisions are made around the inclusion or exclusion of ES, OHS and WC information in language and labour market preparation programs for new immigrants.

  17. An intensive nurse-led, multi-interventional clinic is more successful in achieving vascular risk reduction targets than standard diabetes care.

    LENUS (Irish Health Repository)

    MacMahon Tone, J

    2009-06-01

    The aim of this research was to determine whether an intensive, nurse-led clinic could achieve recommended vascular risk reduction targets in patients with type 2 diabetes as compared to standard diabetes management.

  18. Efficacy and safety of adding mizoribine to standard treatment in patients with immunoglobulin A nephropathy: A randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Keiji Hirai

    2017-06-01

    Full Text Available Background: Mizoribine (MZR is an immunosuppressive drug used in Japan for treating patients with lupus nephritis and nephrotic syndrome and has been also reportedly effective in patients with immunoglobulin A (IgA nephropathy. However, to date, few randomized control studies of MZR are performed in patients with IgA nephropathy. Therefore, this prospective, open-label, randomized, controlled trial aimed to investigate the efficacy and safety of adding MZR to standard treatment in these patients, and was conducted between April 1, 2009, and March 31, 2016, as a multicenter study. Methods: Patients were randomly assigned (1:1 to receiving standard treatment plus MZR (MZR group or standard treatment (control group. MZR was administered orally at a dose of 150 mg once daily for 12 months. Results: Primary outcomes were the percentage reduction in urinary protein excretion from baseline and the rate of patients with hematuria disappearance 36 months after study initiation. Secondary outcomes were the rate of patients with proteinuria disappearance, clinical remission rate, absolute changes in estimated glomerular filtration rate from baseline, and the change in daily dose of prednisolone. Forty-two patients were randomly assigned to MZR (n = 21 and control groups (n = 21. Nine patients in MZR group and 15 patients in the control group completed the study. No significant differences were observed between the two groups with respect to primary and secondary outcomes. Conclusion: The addition of MZR to standard treatment has no beneficial effect on reducing urinary protein excretion and hematuria when treating patients with IgA nephropathy.

  19. A complete analysis of a nuclear building to nuclear safety standards

    International Nuclear Information System (INIS)

    Bergeretto, G.; Giuliano, V.; Lazzeri, L.

    1975-01-01

    The nuclear standards impose on the designer the necessity of examining the loads, stresses and strains in a nuclear building even under extreme loading conditions, both due to plant malfunctions and environmental accidents. It is necessary then to generate, combine and examine a tremendous amount of data; really the lack of symmetry and general complication of the structures and the large number of loading combinations make an automatic analysis quite necessary. A largely automatized procedure is presented in view of solving the problem by a series of computer programs linked together as follows. After the seismic analysis has been performed by (SADE CODE) these data together with the data coming from thermal specifications, weight, accident descriptions etc. are fed into a finite element computer code (SAP4) for analysis. They are processed and combined by a computer code (COMBIN) according to the loading conditions (the usual list in Italy is given and briefly discussed), so that for each point (or each selected zone) under each loading condition the applied loads are listed. These data are fed to another computer code (DTP), which determines the amount of reinforcing bars necessary to accommodate the most severe of the loading conditions. The Aci 318/71 and Italian regulation procedures are followed; the characteristics of the program are briefly described and discussed. Some particular problems are discussed, e.g. the thermal stresses due to normal and accident conditions, the inelastic behavior of some frame elements (due to concrete cracking) is considered by means of an 'ad hoc' code. Typical examples are presented and the results are discussed showing a relatively large benefit in considering this inelastic effect

  20. Opinions on Fresh Produce Food Safety and Quality Standards by Fresh Produce Supply Chain Experts from the Global South and North.

    Science.gov (United States)

    Jacxsens, Liesbeth; Van Boxstael, Sigrid; Nanyunja, Jessica; Jordaan, Danie; Luning, Pieternel; Uyttendaele, Mieke

    2015-10-01

    This study describes the results of an on-line survey of fresh produce supply chain experts who work with producers from the Global North (n = 41, 20 countries) and the Global South (n = 63, 29 countries). They expressed their opinion using 1 to 5 Likert scales on several items related to four types of food safety and quality standards and legislation: Codex Alimentarius standards, European Union legislation, national legislation, and private standards. The results reflect the different circumstances under which the Southern and Northern producers operate in relation to the local organization, regulation, and support of the sector; but they also indicate similar challenges, in particular, the challenge of private standards, which were perceived to demand a higher implementation effort than the other three types of standards. Private standards were also strongly perceived to exclude Southern and Northern small- and medium-scale producers from high-value markets, whereas European Union legislation was perceived to strongly exclude, in particular, small- and medium-scale Southern producers. The results further highlight concerns about costly control measures and third-party certification that are required by downstream buyers but that are mostly paid for by upstream suppliers. Food standards are seen in their dual role as a catalyst for implementation of structured food safety management systems on the one hand and as a nontariff barrier to trade on the other hand. The results of the survey also pointed up the advantages of enforcing food safety and food quality standards in terms of knowledge spillover to noncertified activities, increased revenues, and improved food safety of delivered produce. Survey results highlight the importance of technical assistance and support of producers by governments and producer cooperatives or trade associations in the implementation and certification of food standards, along with increased awareness of and training of individuals in

  1. Misapplication of the IAEA 1996 basic safety standards to the minerals industry. Impact on the NORM and TENORM issues

    International Nuclear Information System (INIS)

    Koperski, J.

    2000-01-01

    Mining and processing of minerals results in increased concentrations of the naturally occurring radioactive materials (NORM) in products and/or process wastes, relative to the source materials. The technologically enhanced naturally occurring radioactive material (TENORM) phenomenon may bring minerals industry operations into the ream of regulatory concern worldwide. The IAEA 1996 International Basic Safety Standards (BSS) have become the de facto blueprint for a number of national radiation safety regulations. But verbatim adoption of the BSS would clearly result in the great majority of minerals industry operations becoming, for the first time ever, subject to the provisions of radiation protection legislation. Consequently, notification, registration, licensing, occupational and environmental monitoring, statutory reporting, appointment of radiation safety staff etc. would be required. This would not only constitute a major culture shock' but would result in ongoing logistics and economic burden to the affected operations. In some cases it could spell their end. The commensurate demand on regulatory authorities would also emerge. The exemption criteria from the requirements of the BSS are very restrictive. They are not suitable for mining and processing of NORM/TENORM bearing minerals. The criteria have been expressed in terms of numerical exemption levels for hundreds of radionuclides, including all those that occur naturally. The levels specify both, the maximum exempted Activity Concentration and the maximum exempted total Activity of each radionuclide in the host material. Even if an operation could comply with the Activity Concentration criterion, due to the sheer mass of the minerals a non-compliance with the total Activity would always occur. The maximum exempted mass is of the order of single kilograms for wastes from petroleum and gas production, tin smelting and bauxite ore processing; for phosphate rock, fertilisers and most mineral sands products

  2. Standard Review Plan for the review of safety analysis reports for nuclear power plants, updates. Irregular repts

    International Nuclear Information System (INIS)

    1980-01-01

    The Standard Review Plan (SRP) is prepared for the guidance of staff reviewers in the Office of Nuclear Reactor Regulation in performing safety reviews of applications to construct or operate nuclear power plants. The principal purpose of the SRP is to assure the quality and uniformity of staff reviews, and to present a well-defined base from which to evaluate proposed changes in the scope and requirements of reviews. It is also a purpose of the SRP to make information about regulatory matters widely available and to improve communication and understanding of the staff review process by interested members of the public and the nuclear power industry. The Standard Review Plan is written so as to cover a variety of site conditions and plant designs. Each section is written to provide the complete procedure and all acceptance criteria for all of the areas of review pertinent to that section. However, for any given application, the staff reviewers may select and emphasize particular aspects of each SRP section as is appropriate for the application

  3. ExSTA: External Standard Addition Method for Accurate High-Throughput Quantitation in Targeted Proteomics Experiments.

    Science.gov (United States)

    Mohammed, Yassene; Pan, Jingxi; Zhang, Suping; Han, Jun; Borchers, Christoph H

    2018-03-01

    Targeted proteomics using MRM with stable-isotope-labeled internal-standard (SIS) peptides is the current method of choice for protein quantitation in complex biological matrices. Better quantitation can be achieved with the internal standard-addition method, where successive increments of synthesized natural form (NAT) of the endogenous analyte are added to each sample, a response curve is generated, and the endogenous concentration is determined at the x-intercept. Internal NAT-addition, however, requires multiple analyses of each sample, resulting in increased sample consumption and analysis time. To compare the following three methods, an MRM assay for 34 high-to-moderate abundance human plasma proteins is used: classical internal SIS-addition, internal NAT-addition, and external NAT-addition-generated in buffer using NAT and SIS peptides. Using endogenous-free chicken plasma, the accuracy is also evaluated. The internal NAT-addition outperforms the other two in precision and accuracy. However, the curves derived by internal vs. external NAT-addition differ by only ≈3.8% in slope, providing comparable accuracies and precision with good CV values. While the internal NAT-addition method may be "ideal", this new external NAT-addition can be used to determine the concentration of high-to-moderate abundance endogenous plasma proteins, providing a robust and cost-effective alternative for clinical analyses or other high-throughput applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Assessing the Relative Influence and Efficacy of Public and Private Food Safety Regulation Regimes: Comparing Codex and Global G.A.P. Standards.

    Science.gov (United States)

    Halabi, Sam F; Lin, Ching-Fu

    An extensive global system of private food regulation is under construction, one that exceeds conventional regulation thought of as being driven by public authorities like FDA and USDA in the U.S. or the Food Standards Agency in the UK. Agrifood and grocer organizations, in concert with some farming groups, have been the primary designers of this new food regulatory regime. These groups have established alliances that compete with national regulators in complex ways. This article analyzes the relationship between public and private sources of food safety regulation by examining standards adopted by the Codex Alimentarius Commission, a food safety organization jointly run by the Food and Agricultural Organization and the World Health Organization and GlobalG.A.P., a farm assurance program created in the late 1990s by supermarket chains and their major suppliers which has now expanded into a global certifying coalition. While Codex standards are adopted, often as written, by national food safety regulators who are principal drivers of the standard setting process, customers for agricultural products in many countries now demand evidence of GlobalG.A.P. certification as a prerequisite for doing business This article tests not only the durability and strength of private sector standard setting in the food safety system, but also the desirability of that system as an alternative to formal, governmental processes embodied, for our purposes, in the standards adopted by Codex. In many cases, official standards and GlobalG.A.P. standards clash in ways that implicate not only food safety but the flow of agricultural products in the global trading system. The article analyzes current weaknesses in both regimes and possibilities for change that will better reconcile the two competing systems.

  5. The efficacy and safety of the targeted drug combined with adriamycin liposome solution for HER-2-positive breast cancer

    Directory of Open Access Journals (Sweden)

    Zi-Ping Zhou

    2017-05-01

    Full Text Available Objective: To study the efficacy and safety of the targeted drug trastuzumab combined with adriamycin liposome solution for HER-2-positive breast cancer. Methods: A total of 112 patients with breast cancer who received chemotherapy in Department of Cardiothoracic Breast Surgery, Guangdong TongJiang Hospital between May 2014 and April 2016 were selected as the research subjects and divided into two groups by random number table, liposome group received trastuzumab + adriamycin liposome chemotherapy, and the control group received trastuzumab + adriamycin chemotherapy. Before chemotherapy as well as 4 weeks and 8 weeks after chemotherapy, serum levels of tumor markers, cytokines and myocardial injury indexes were detected, the electrocardiography was conducted and the degree of myocardial injury was determined. Results: 4 weeks and 8 weeks after chemotherapy, serum CEA, CA15-3, TPS, CTGF, TGF-β, TSGF, VEGF and MK levels of both groups were significantly lower than those before chemotherapy, serum CK-MB and cTnI levels were significantly higher than those before chemotherapy, limb leads QRS amplitudes and chest leads QRS amplitudes were significantly lower than those before chemotherapy, serum CEA, CA15-3, TPS, CTGF, TGF-β, TSGF, VEGF, MK, CK-MB and cTnI levels of liposome group were significantly lower than those of control group, and the limb leads QRS amplitudes and chest lead QRS amplitudes were significantly higher than those of control group. Conclusion: Targeted drug combined with adriamycin liposome therapy for HER-2-positive breast cancer can improve the curative effect and reduce the cardiotoxicity.

  6. Adoption and adaptation of the International Basic Safety Standards to Cuban reality; Adopcion y adaptacion de las normas basicas internacionales de seguridad a la realidad cubana

    Energy Technology Data Exchange (ETDEWEB)

    Quevedo Garcia, J.R.; Lopez Forteza, Y.; Sarabia Molina, I.; Alonso Gonzalez, I.; Guillen Campos, A. [Centro Nacional de Seguridad Nuclear, La Habana (Cuba)]. E-mail: regulacion@cnsn.cu

    2001-07-01

    The new Cuban regulatory document homologous to the 'International Basic Safety Standards for protection against ionizing radiation and for the safety of radiation sources' (IBSS) will be published in the near future. The document was accomplished on the basis of the IAEA Safety Series No 115 to which text it was performed the needed changes in order adapt it to the national reality in the field of protection and safety. The document is published with the consensus of the principal organizations and entities with specific responsibilities in relation to protection and safety as well as the consensus of the entities providing services in this field. The present paper presents and discusses the basic aspects included in the Cuban document that in one or another way should be considered as precision in reference to the IBSS. (author)

  7. Standard model for the safety analysis report of nuclear fuel reprocessing plants; Modelo padrao para relatorio de analise de seguranca de usinas de reprocessamento de combustiveis nucleares

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1980-02-15

    This norm establishes the Standard Model for the Safety Analysis Report of Nuclear Fuel Reprocessing Plants, comprehending the presentation format, the detailing level of the minimum information required by the CNEN for evaluation the requests of Construction License or Operation Authorization, in accordance with the legislation in force. This regulation applies to the following basic reports: Preliminary Safety Analysis Report - PSAR, integrating part of the requirement of Construction License; and Final Safety Analysis Report (FSAR) which is the integrating part of the requirement for Operation Authorization.

  8. Notification and authorization for the use of radiation sources (Supplement to IAEA Safety Standards Series No. GS-G-1.5)

    International Nuclear Information System (INIS)

    2011-10-01

    The achievement and maintenance of a high level of safety in the use of radiation sources depend on there being a sound legal and governmental infrastructure, including a national regulatory body with well-defined responsibilities and functions. These responsibilities and functions include establishing and implementing a system for notification and authorization for control over radiation sources, including a system for review and assessment of applications for authorization. The Safety Requirements publication entitled Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety establishes the requirements for legal and governmental infrastructure. The term 'infrastructure' refers to the underlying structure of systems and organizations. This includes requirements concerning the establishment of a regulatory body for radiation sources and the responsibilities and functions assigned to it. The International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (the Basic Safety Standards or the BSS) establish basic requirements for protection against risks associated with exposure to ionizing radiation and for the safety of radiation sources. The application of the BSS is based on the presumption that national infrastructures are in place to enable governments to discharge their responsibilities to for radiation protection and safety. This TECDOC provides practical guidance on the process for dealing with applications for authorization and accepting notifications to regulatory bodies. Examples of guidelines that may be used by persons required to notify or apply for authorization and of the regulatory body's review and assessment procedures are provided in the Appendices. The TECDOC is oriented towards national regulatory infrastructures concerned with protection and safety for radiation sources used in medicine, industry, agriculture, research and education. The IAEA

  9. DOE Handbook: Supplementary guidance and design experience for the fusion safety standards DOE-STD-6002-96 and DOE-STD-6003-96

    Energy Technology Data Exchange (ETDEWEB)

    None

    1999-01-01

    Two standards have been developed that pertain to the safety of fusion facilities. These are DOE- STD-6002-96, Safety of Magnetic Fusion Facilities: Requirements, and DOE-STD-6003-96, Safety of Magnetic Fusion Facilities: Guidance. The first of these standards identifies requirements that subscribers to that standard must meet to achieve safety in fusion facilities. The second standard contains guidance to assist in meeting the requirements identified in the first This handbook provides additional documentation on good operations and design practices as well as lessons learned from the experiences of designers and operators of previous fusion facilities and related systems. It is intended to capture the experience gained in the various fields and pass it on to designers of future fusion facilities as a means of enhancing success and safety. The sections of this document are presented according to the physical location of the major systems of a fusion facility, beginning with the vacuum vessel and proceeding to those systems and components outside the vacuum vessel (the "Ex-vessel Systems"). The last section describes administrative procedures that cannot be localized to specific components. It has been tacitly assumed that the general structure of the fusion facilities addressed is that of a tokamak though the same principles would apply to other magnetic confinement options.

  10. Safety-evaluation report related to the license renewal and power increase for the National Bureau of Standards Reactor (Docket No. 50-184)

    International Nuclear Information System (INIS)

    1983-09-01

    This Safety Evaluation Report for the application filed by the National Bureau of Standards (NBS) for an increase in power from 10 MWt to 20 MWt and for a renewal of the Operating License TR-5 to continue to operate the test reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is located in Gaithersburg, Maryland, on the site of the National Bureau of Standards, which is a bureau of the Department of Commerce. The staff concludes that the NBS reactor can operate at the 20 MWt power level without endangering the health and safety of the public

  11. Compliance of child care centers in Pennsylvania with national health and safety performance standards for emergency and disaster preparedness.

    Science.gov (United States)

    Olympia, Robert P; Brady, Jodi; Kapoor, Shawn; Mahmood, Qasim; Way, Emily; Avner, Jeffrey R

    2010-04-01

    To determine the preparedness of child care centers in Pennsylvania to respond to emergencies and disasters based on compliance with National Health and Safety Performance Standards for Out-of-Home Child Care Programs. A questionnaire focusing on the presence of a written evacuation plan, the presence of a written plan for urgent medical care, the immediate availability of equipment and supplies, and the training of staff in first aid/cardiopulmonary resuscitation (CPR) as delineated in Caring for Our Children: National Health and Safety Performance Standards for Out-of-Home Child Care Programs, 2nd Edition, was mailed to 1000 randomly selected child care center administrators located in Pennsylvania. Of the 1000 questionnaires sent, 496 questionnaires were available for analysis (54% usable response rate). Approximately 99% (95% confidence interval [CI], 99%-100%) of child care centers surveyed were compliant with recommendations to have a comprehensive written emergency plan (WEP) for urgent medical care and evacuation, and 85% (95% CI, 82%-88%) practice their WEP periodically throughout the year. More than 20% of centers did not have specific written procedures for floods, earthquakes, hurricanes, blizzards, or bomb threats, and approximately half of the centers did not have specific written procedures for urgent medical emergencies such as severe bleeding, unresponsiveness, poisoning, shock/heart or circulation failure, seizures, head injuries, anaphylaxis or allergic reactions, or severe dehydration. A minority of centers reported having medications available to treat an acute asthma attack or anaphylaxis. Also, 77% (95% CI, 73%-80%) of child care centers require first aid training for each one of its staff members, and 33% (95% CI, 29%-37%) require CPR training. Although many of the child care centers we surveyed are in compliance with the recommendations for emergency and disaster preparedness, specific areas for improvement include increasing the frequency

  12. Notification and authorization for the use of radiation sources (supplement to IAEA Safety Standards Series No. GS-G-1.5)

    International Nuclear Information System (INIS)

    2010-10-01

    The achievement and maintenance of a high level of safety in the use of radiation sources depend on there being a sound legal and governmental infrastructure, including a national regulatory body with well-defined responsibilities and functions. These responsibilities and functions include establishing and implementing a system for notification and authorization for control over radiation sources, including a system for review and assessment of applications for authorization. The Safety Requirements publication entitled Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety establishes the requirements for legal and governmental infrastructure. The term 'infrastructure' refers to the underlying structure of systems and organizations. This includes requirements concerning the establishment of a regulatory body for radiation sources and the responsibilities and functions assigned to it. The International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (the Basic Safety Standards or the BSS) establish basic requirements for protection against risks associated with exposure to ionizing radiation and for the safety of radiation sources. The application of the BSS is based on the presumption that national infrastructures are in place to enable governments to discharge their responsibilities to for radiation protection and safety. This TECDOC provides practical guidance on the process for dealing with applications for authorization and accepting notifications to regulatory bodies. Examples of guidelines that may be used by persons required to notify or apply for authorization and of the regulatory body's review and assessment procedures are provided in the Appendices. The TECDOC is oriented towards national regulatory infrastructures concerned with protection and safety for radiation sources used in medicine, industry, agriculture, research and education

  13. Notification and authorization for the use of radiation sources (supplement to IAEA Safety Standards Series No. GS-G-1.5)

    International Nuclear Information System (INIS)

    2007-04-01

    The achievement and maintenance of a high level of safety in the use of radiation sources depend on there being a sound legal and governmental infrastructure, including a national regulatory body with well-defined responsibilities and functions. These responsibilities and functions include establishing and implementing a system for notification and authorization for control over radiation sources, including a system for review and assessment of applications for authorization. The Safety Requirements publication entitled Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety establishes the requirements for legal and governmental infrastructure. The term 'infrastructure' refers to the underlying structure of systems and organizations. This includes requirements concerning the establishment of a regulatory body for radiation sources and the responsibilities and functions assigned to it. The International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (the Basic Safety Standards or the BSS) establish basic requirements for protection against risks associated with exposure to ionizing radiation and for the safety of radiation sources. The application of the BSS is based on the presumption that national infrastructures are in place to enable governments to discharge their responsibilities to for radiation protection and safety. This TECDOC provides practical guidance on the process for dealing with applications for authorization and accepting notifications to regulatory bodies. Examples of guidelines that may be used by persons required to notify or apply for authorization and of the regulatory body's review and assessment procedures are provided in the Appendices. The TECDOC is oriented towards national regulatory infrastructures concerned with protection and safety for radiation sources used in medicine, industry, agriculture, research and education

  14. Methods for investigating the relationship between accidents, road user behaviour and road design standards. Annex III to SWOV-report `Safety effects of road design standards', R-94-7 (see C 2838 (IRRD 866221).

    NARCIS (Netherlands)

    Maycock, G. & Summersgill, I.

    1995-01-01

    This volume is one of the annexes to a main report on safety effects of road design standards which was compiled by SWOV in collaboration with other European partners, in 1993-1994. For the covering abstract of the report or the report itself, see C 2838. This annex summarises the alternative

  15. Navigating the fine line between benefit and risk in chronic atrial fibrillation: rationale and design of the Standard versus Atrial Fibrillation spEcific managemenT studY (SAFETY).

    Science.gov (United States)

    Carrington, Melinda J; Ball, Jocasta; Horowitz, John D; Marwick, Thomas H; Mahadevan, Gnanadevan; Wong, Chiew; Abhayaratna, Walter P; Haluska, Brian; Thompson, David R; Scuffham, Paul A; Stewart, Simon

    2013-06-20

    Health outcomes associated with atrial fibrillation (AF) continue to be poor and standard management often does not provide clinical stability. The Standard versus Atrial Fibrillation spEcific managemenT studY (SAFETY) compares the efficacy of a post-discharge, nurse-led, multi-disciplinary programme to optimise AF management with usual care. SAFETY is a prospective, multi-centre, randomised controlled trial with blinded-endpoint adjudication. A target of 320 hospitalised patients with a chronic form of AF will be randomised (stratified by "rate" versus "rhythm" control) to usual post-discharge care or the SAFETY Intervention (SI). The SI involves home-based assessment, extensive clinical profiling and the application of optimal gold-standard pharmacology which is individually tailored according to a "traffic light" framework based on clinical stability, risk profile and therapeutic management. The primary endpoint is event-free survival from all-cause death or unplanned readmission during 18-36 months follow-up. Secondary endpoints include rate of recurrent hospital stay, treatment success (i.e. maintenance of rhythm or rate control and/or application of anti-thrombotic therapy without a bleeding event) and cost-efficacy. With study recruitment to be completed in early 2012, the results of this study will be available in early 2014. If positive, SAFETY will represent a potentially cost-effective and readily applicable strategy to improve health outcomes in high risk individuals discharged from hospital with chronic AF. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  16. RF radiation safety handbook

    International Nuclear Information System (INIS)

    Kitchen, Ronald.

    1993-01-01

    Radio frequency radiation can be dangerous in a number of ways. Hazards include electromagnetic compatibility and interference, electro-explosive vapours and devices, and direct effects on the human body. This book is a general introduction to the sources and nature of RF radiation. It describes the ways in which our current knowledge, based on relevant safety standards, can be used to safeguard people from any harmful effects of RF radiation. The book is designed for people responsible for, or concerned with, safety. This target audience will primarily be radio engineers, but includes those skilled in other disciplines including medicine, chemistry or mechanical engineering. The book covers the problems of RF safety management, including the use of measuring instruments and methods, and a review of current safety standards. The implications for RF design engineers are also examined. (Author)

  17. Safety and feasibility of regadenoson use for suboptimal heart rate response during symptom-limited standard Bruce exercise stress test.

    Science.gov (United States)

    Partington, Sara L; Lanka, Viswanatha; Hainer, Jon; Blankstein, Ron; Skali, Hicham; Forman, Daniel E; Di Carli, Marcelo F; Dorbala, Sharmila

    2012-10-01

    Regadenoson during exercise stress test (ETT) can provide maximal hyperemia for myocardial perfusion imaging (MPI), along with exercise information. Our aim was to study the feasibility and safety of regadenoson injection at peak ETT for submaximal heart rate (HR) response. Consecutive patients who underwent SPECT MPI with standard Bruce ETT or supine-regadenoson (Supine-Reg) were analyzed. ETT patients were grouped as ETT-Max [maximal HR > 0.85 * (220 - age), N = 1,522], ETT-Submax (submaximal HR no regadenoson, N = 504), ETT-Reg (submaximal HR and regadenoson, N = 211). The HR during ETT was submaximal in 715 (32%) patients. Of these, 211 patients (30%) underwent ETT-Reg (mean exercise duration: 5.5 ± 2.5 minutes). ETT-Reg patients had a higher frequency of hypertension, diabetes, smoking and beta-blocker use, similar rest systolic blood pressure (SBP), but lower rest and peak HR and peak SBP compared to ETT-Max patients. There were no serious complications with regadenoson. Side effects (49% vs 6%, P < .0001) were fewer and aminophylline use was lower with ETT-Reg compared to Supine-Reg (0.5% vs 8.1%, P = .001). Submaximal HR response to ETT is common. ETT-Reg is safe, feasible, and well-tolerated. ETT-Reg facilitates a diagnostic MPI with reporting of functional capacity, exercise ECG/hemodynamic changes and MPI at maximal hyperemia.

  18. Review of standards/codes of practice related to safety and reliability of wind energy conversion systems. Normontwikkeling windturbines in binnen- en buitenland

    Energy Technology Data Exchange (ETDEWEB)

    Beurskens, H.J.

    1986-02-01

    An overview is given of standards which are developed or have been developed with respect to safety and reliability of wind energy conversion systems. The countries involved are: Canada, Denmark, Federal Republic of Germany, The Netherlands, Sweden and the United States of America. 8 figs., 4 tabs., 19 refs.

  19. Review of standards codes of practice related to safety and reliability of wind energy conversion systems. Normontwikkeling windturbines in binnen- en buitenland

    Energy Technology Data Exchange (ETDEWEB)

    Beurskens, H.J.

    1985-01-01

    An overview is given of standards which are developed or have been developed with respect to safety and reliability of wind energy conversion systems. The countries involved are: Canada, Denmark, Federal Republic of Germany, The Netherlands, Sweden and the United States of America. 8 figs., 2 tabs., 19 refs.

  20. DOE Handbook: Supplementary guidance and design experience for the fusion safety standards DOE-STD-6002-96 and DOE-STD-6003-96

    International Nuclear Information System (INIS)

    1999-01-01

    Two standards have been developed that pertain to the safety of fusion facilities. These are DOE- STD-6002-96, Safety of Magnetic Fusion Facilities: Requirements, and DOE-STD-6003-96, Safety of Magnetic Fusion Facilities: Guidance. The first of these standards identifies requirements that subscribers to that standard must meet to achieve safety in fusion facilities. The second standard contains guidance to assist in meeting the requirements identified inthefirst This handbook provides additional documentation on good operations and design practices as well as lessons learned from the experiences of designers and operators of previous fusion facilities and related systems. It is intended to capture the experience gained in the various fields and pass it on to designers of future fusion facilities as a means of enhancing success and safeiy. The sections of this document are presented according to the physical location of the major systems of a t%sion facility, beginning with the vacuum vessel and proceeding to those systems and components outside the vacuum vessel (the ''Ex-vessel Systems''). The last section describes administrative procedures that cannot be localized to specific components. It has been tacitly assumed that the general structure of the fusion facilities addressed is that of a tokamak though the same principles would apply to other magnetic confinement options

  1. Safety Standards: Implementing Fall Prevention Interventions and Sustaining Lower Fall Rates by Promoting the Culture of Safety on an Inpatient Rehabilitation Unit.

    Science.gov (United States)

    Leone, Rita Marie; Adams, Rachel Joy

    2016-01-01

    The purpose of this article is to review a quality improvement project aimed to examine how nurse leaders in an inpatient rehabilitation (IPR) unit can reduce the number of patient falls by implementing multiple fall prevention interventions and sustain their results by promoting a strong culture of safety on the unit. A retrospective review of IPR fall rates was performed. Quarterly fall rates were then compared with implementation dates of fall prevention interventions (safety huddles, signage, and hourly rounding). Culture of safety scores were also examined to assess the effect of an enhanced culture of safety on the sustainability of lowered fall rates. The largest decrease in fall rate was noted after initial revitalization efforts of the IPR unit's culture of safety concurrently with hourly rounding. Fall rates rise and fall despite multiple fall prevention interventions and encouraging a positive shift in the culture of safety. Physical injuries following a fall can reduce mobility and increase morbidity. Costs associated with falls negatively impact costs and reimbursement. Employing evidence-based fall prevention strategies are then of critical importance to nurse leaders as falls remain an ongoing serious adverse event. © 2015 Association of Rehabilitation Nurses.

  2. Feasibility study and uncertainties in the validation of an existing safety-related control circuit with the ISO 13849-1:2006 design standard

    International Nuclear Information System (INIS)

    Jocelyn, Sabrina; Baudoin, James; Chinniah, Yuvin; Charpentier, Philippe

    2014-01-01

    In industry, machine users and people who modify or integrate equipment often have to evaluate the safety level of a safety-related control circuit that they have not necessarily designed. The modifications or integrations may involve work to make an existing machine that does not comply with normative or regulatory specifications safe. However, how can a circuit performing a safety function be validated a posteriori? Is the validation exercise feasible? What are the difficulties and limitations of such a procedure? The aim of this article is to answer these questions by presenting a validation study of a safety function of an existing machine. A plastic injection molding machine is used for this study, as well as standard ISO 13849-1:2006. Validation consists of performing an a posteriori (post-design) estimation of the performance level of the safety function. The procedure is studied for two contexts of use of the machine: in industry, and in laboratory. The calculations required by the ISO standard were done using Excel, followed by SIStema software. It is shown that, based on the context of use, the estimated performance level was different for the same safety-related circuit. The variability in the results is explained by the assumptions made by the person undertaking the validation without the involvement of the machine designer. - Highlights: • Validation of the performance level of a safety function is undertaken. • An injection molding machine and ISO 13849-1:2006 standard are used for the procedure. • The procedure is undertaken for two contexts of use of the machine. • In this study, the performance level depends on the context of use. • The assumptions made throughout the study partially explain this difference

  3. The New Food Safety Standard ISO 22000. Assessment, Comparison and Correlation with HACCP and ISO 9000:2000. The Practical Implementation in Victual Business

    OpenAIRE

    Mamalis, Spyridon; Kafetzopoulos, Dimitrios P.; Aggelopoulos, Stamatis

    2009-01-01

    The present paper aims to study the application of new standard of food safety: ISO 22000:2005 in the catering industry. At the beginning the study made a comparison between ISO 22000 with the HACCP system and the ISO 9000:2000 standard, in order to identify their similarities and differences, while it pinpoints and records the reasons for creating and applying the ISO 22000 standard. Due to the preliminary nature of this study, we are given the opportunity to assess the practical application...

  4. [Road map for health and safety management systems in healthcare facilities, according to the OHSAS 18001:2007 standard].

    Science.gov (United States)

    Pugliese, F; Albini, E; Serio, O; Apostoli, P

    2011-01-01

    The 81/2008 Act has defined a model of a health and safety management system that can contribute to prevent the occupational health and safety risks. We have developed the structure of a health and safety management system model and the necessary tools for its implementation in health care facilities. The realization of a model is structured in various phases: initial review, safety policy, planning, implementation, monitoring, management review and continuous improvement. Such a model, in continuous evolution, is based on the responsibilities of the different corporate characters and on an accurate analysis of risks and involved norms.

  5. A randomised controlled study to evaluate the effectiveness of targeted occupational health and safety consultation or inspection in Ontario manufacturing workplaces.

    Science.gov (United States)

    Hogg-Johnson, Sheilah; Robson, Lynda; Cole, Donald C; Amick, Benjamin C; Tompa, Emile; Smith, Peter M; van Eerd, Dwayne; Mustard, Cameron

    2012-12-01

    From 2004 to 2008, the prevention system in Ontario, Canada ran the High Risk Firm Initiative, an injury-experience based targeted consultation or inspection programme. Our objective was to establish whether prevention system targeting of firms was effective in improving injury outcomes. Randomised controlled parallel groups. Population included all manufacturing firms registered with the Ontario Workplace Safety & Insurance Board in 2005. Firms ranked between the 2nd and 10th percentile on a composite measure of occupational health and safety performance were randomised to three study arms in 2006: targeted for Health & Safety Association (HSA) consultation, targeted for Ministry of Labour (MOL) inspection, or services as usual. Data included firm characteristics (sector, size, years in business, region, branches), work injury claims 2002-2008 and measures of consulting and inspecting activity. Negative binomial generalised estimating equations modelled claim and disability day rates by study arm and year, controlling for firm characteristics. Among 2153 firms, firm characteristics and 2002-2005 rates of work injury claims and disability days were similar across arms. Firm outcomes were significantly different from year to year, but study arm by year interactions were insignificant indicating similar trends for all three study arms. 83% of HSA targeted firms were contacted and 63% engaged while 75% of MOL targeted firms were inspected with orders written in 56%. Consultation and enforcement programmes as implemented were not sufficient to reduce work injury outcomes over 21 month follow-up. Lack of benefit could be due to non-specific firm selection methods, limited firm participation in interventions, low intervention intensity or insensitivity of available outcomes.

  6. Randomized study on the safety and efficacy of dual-axis rotational versus standard coronary angiography in.

    Science.gov (United States)

    Liu, Hui-liang; Jin, Zhi-geng; Yang, Sheng-li; Luo, Jian-ping; Ma, Dong-xing; Liu, Ying; Han, Wei

    2012-03-01

    Dual-axis rotational coronary angiography (DARCA) was developed as an innovative adaptation of rotational angiography (RA), but it requires a longer coronary injection compared to standard coronary angiography (SA). As the body of the average Chinese patient is smaller than that of most western patients, with the same contrast injection time, the risk of complications from the contrast agent is increased in this population. The purpose of this study was to assess the clinical safety and efficacy of DARCA in the diagnosis of coronary artery disease (CAD) in the Chinese population by directly comparing it to SA. Two hundred Chinese patients were randomized to either the SA group (n = 100) or DARCA group (n = 100). Contrast utilization, radiation exposure and procedure time were recorded for each modalities. Blood pressure (BP), heart rate (HR) pre and post injection symptoms and any arrhythmias were recorded. Compared to the SA group, there was a 42% reduction in contrast utilization, 55% reduction in radiation exposure and a 31% shorter procedure time in the DARCA group. In both groups, there were slight declines in the systolic BP values in the left coronary artery (LCA) post injection (P < 0.01). Moreover, post injection HRs for the LCA were also reduced in the DARCA group (P < 0.01). But all of these changes were small, transient and without clinical importance. Only one patient (1%) in the DARCA group had an attack of ventricular tachycardia immediately post injection and it resolved by itself during LCA angiography. No arrhythmias occurred in the SA group. DARCA is a safe, efficient, and clinically comparable alternative to SA in the diagnosis of coronary artery disease in the Chinese population with less contrast utilized, which is less radiation exposure and a shorter procedure time than SA.

  7. Electromagnetic Field Modeling of Transcranial Electric and Magnetic Stimulation: Targeting, Individualization, and Safety of Convulsive and Subconvulsive Applications

    Science.gov (United States)

    Deng, Zhi-De

    The proliferation of noninvasive transcranial electric and magnetic brain stimulation techniques and applications in recent years has led to important insights into brain function and pathophysiology of brain-based disorders. Transcranial electric and magnetic stimulation encompasses a wide spectrum of methods that have developed into therapeutic interventions for a variety of neurological and psychiatric disorders. Although these methods are at different stages of development, the physical principle underlying these techniques is the similar. Namely, an electromagnetic field is induced in the brain either via current injection through scalp electrodes or via electromagnetic induction. The induced electric field modulates the neuronal transmembrane potentials and, thereby, neuronal excitability or activity. Therefore, knowledge of the induced electric field distribution is key in the design and interpretation of basic research and clinical studies. This work aims to delineate the fundamental physical limitations, tradeoffs, and technological feasibility constraints associated with transcranial electric and magnetic stimulation, in order to inform the development of technologies that deliver safer, and more spatially, temporally, and patient specific stimulation. Part I of this dissertation expounds on the issue of spatial targeting of the electric field. Contrasting electroconvulsive therapy (ECT) and magnetic seizure therapy (MST) configurations that differ markedly in efficacy, side effects, and seizure induction efficiency could advance our understanding of the principles linking treatment parameters and therapeutic outcome and could provide a means of testing hypotheses of the mechanisms of therapeutic action. Using the finite element method, we systematically compare the electric field characteristics of existing forms of ECT and MST. We introduce a method of incorporating a modality-specific neural activation threshold in the electric field models that can

  8. School Bus Ridership Orientation and Training. Pupil Transportation Safety Program. Implementation & Reference Guide for D.O.T. Standard 17.

    Science.gov (United States)

    Larsen, R. A.

    Designed to assist pupil transportation supervisors, safety instructors, school bus drivers, curriculum writers, teachers, and others who have some type of responsibility for school bus safety, this suggestion-type booklet provides practical tips for educating student school bus riders. The items covered are (1) going to the bus stop; (2) at the…

  9. Influence of different safety shoes on gait and plantar pressure: a standardized examination of workers in the automotive industry.

    Science.gov (United States)

    Ochsmann, Elke; Noll, Ulrike; Ellegast, Rolf; Hermanns, Ingo; Kraus, Thomas

    2016-09-30

    Working conditions, such as walking and standing on hard surfaces, can increase the development of musculoskeletal complaints. At the interface between flooring and musculoskeletal system, safety shoes may play an important role in the well-being of employees. The aim of this study was to evaluate the effects of different safety shoes on gait and plantar pressure distributions on industrial flooring. Twenty automotive workers were individually fitted out with three different pairs of safety shoes ( "normal" shoes, cushioned shoes, and midfoot bearing shoes). They walked at a given speed of 1.5 m/s. The CUELA measuring system and shoe insoles were used for gait analysis and plantar pressure measurements, respectively. Statistical analysis was conducted by ANOVA analysis for repeated measures. Walking with cushioned safety shoes or a midfoot bearing safety shoe led to a significant decrease of the average trunk inclination (pshoes as well as midfoot bearing shoes (pshoes. As expected, plantar pressure distributions varied significantly between cushioned or midfoot bearing shoes and shoes without ergonomic components. The overall function of safety shoes is the avoidance of injury in case of an industrial accident, but in addition, safety shoes could be a long-term preventive instrument for maintaining health of the employees' musculoskeletal system, as they are able to affect gait parameters. Further research needs to focus on safety shoes in working situations.

  10. 2013 updated American Society of Clinical Oncology/Oncology Nursing Society chemotherapy administration safety standards including standards for the safe administration and management of oral chemotherapy.

    Science.gov (United States)

    Neuss, Michael N; Polovich, Martha; McNiff, Kristen; Esper, Peg; Gilmore, Terry R; LeFebvre, Kristine B; Schulmeister, Lisa; Jacobson, Joseph O

    2013-05-01

    In 2009, the American Society of Clinical Oncology (ASCO) and the Oncology Nursing Society (ONS) published standards for the safe use of parenteral chemotherapy in the outpatient setting, including issues of practitioner orders, preparation, and administration of medication. In 2011, these were updated to include inpatient facilities. In December 2011, a multistakeholder workgroup met to address the issues associated with orally administered antineoplastics, under the leadership of ASCO and ONS. The workgroup participants developed recommended standards, which were presented for public comment. Public comments informed final edits, and the final standards were reviewed and approved by the ASCO and ONS Boards of Directors. Significant newly identified recommendations include those associated with drug prescription and the necessity of ascertaining that prescriptions are filled. In addition, the importance of patient and family education regarding administration schedules, exception procedures, disposal of unused oral medication, and aspects of continuity of care across settings were identified. This article presents the newly developed standards.

  11. 2013 updated American Society of Clinical Oncology/Oncology Nursing Society chemotherapy administration safety standards including standards for the safe administration and management of oral chemotherapy.

    Science.gov (United States)

    Neuss, Michael N; Polovich, Martha; McNiff, Kristen; Esper, Peg; Gilmore, Terry R; LeFebvre, Kristine B; Schulmeister, Lisa; Jacobson, Joseph O

    2013-03-01

    In 2009, ASCO and the Oncology Nursing Society (ONS) published standards for the safe use of parenteral chemotherapy in the outpatient setting, including issues of practitioner orders, preparation, and administration of medication. In 2011, these were updated to include inpatient facilities. In December 2011, a multistakeholder workgroup met to address the issues associated with orally administered antineoplastics, under the leadership of ASCO and ONS. The workgroup participants developed recommended standards, which were presented for public comment. Public comments informed final edits, and the final standards were reviewed and approved by the ASCO and ONS Boards of Directors. Significant newly identified recommendations include those associated with drug prescription and the necessity of ascertaining that prescriptions are filled. In addition, the importance of patient and family education regarding administration schedules, exception procedures, disposal of unused oral medication, and aspects of continuity of care across settings were identified. This article presents the newly developed standards.

  12. Essence of demands of standard ISO 22000:2005 in aspect of assurances of milk health safety Istota wymagań standardu ISO 22000:2005 w aspekcie zapewnienia bezpieczeństwa zdrowotnego mleka

    Directory of Open Access Journals (Sweden)

    Justyna Górna

    2008-09-01

    Full Text Available The article presents the essence of demands of ISO 22000 as a standard which allows of control milk health safety in a more effective way. The implementation of system HACCP in the dairy companies undoubtedly make for more safety health products, however microbiological research of pasterized milk shows that it is scarce. The elementary advantage for organization which comes from food quality management system meeting demands included in standard ISO 22000 is undoubtedly assurance of legal demands concerning production of food safety and more effective control of risk of food safety. The dairy companies should aspire for implementation of more rigorous standard ISO 22000:2005.

  13. Standard format and content of a license application for a low-level radioactive waste disposal facility: Safety analysis report

    International Nuclear Information System (INIS)

    1987-01-01

    This document discusses the information that should be provided in the Safety Analysis Report and establishes a uniform format for presenting the information necessary to fulfill the licensing requirements for land disposal of radioactive waste called for in 10 CFR 61. The uniform format will (1) help ensure that the Safety Analysis Report contains the information required by 10 CFR 61, (2) aid the applicant and NRC staff in ensuring that the information is complete, (3) help persons reading the Safety Analysis Report to locate information, and (4) contribute to shortening the time needed for the review process

  14. Standard format and content of a license application for a low-level radioactive waste disposal facility: Safety analysis report

    International Nuclear Information System (INIS)

    1988-01-01

    This document discusses the information that should be provided in the Safety Analysis Report and establishes a uniform format for presenting the information necessary to fulfill the licensing requirements for land disposal of radioactive waste called for in 10 CFR 61. The uniform format will (1) help ensure that the Safety Analysis Report contains the information required by 10 CFR 61, (2) aid the applicant and NRC staff in ensuring that the information is complete, (3) help persons reading the Safety Analysis Report to locate information, and (4) contribute to shortening the time needed for the review process

  15. [Study on the efficacy and safety of sublingual immunotherapy with standardized dermatophagoides farinae drops for allergic rhinitis].

    Science.gov (United States)

    Huang, Shaopeng; Xie, Xiufang; Chen, Yong; Wu, Lihua; Li, Ruiyu; Shen, Fan; Chen, Hong

    2015-04-01

    To evaluate the efficacy and safety of the sublingual immunotherapy with dermatophagoides farinae drops on patients with allergic rhinitis. One hundred and twelve cases were collected from adult patients with dust-mite allergic rhinitis of our hospital who could adhere to treatment and regular follow-up. These patients were randomly allocated to receive either sublingual immunotherapy (SLIT group, n = 56) or medical treatment (Control group, n = 56). To evaluate the clinical efficacy by side effects which were registered, symptom and medication scores which were assessed and rhinoconjunctivitis quality of life questionnaire (RQLQ) which was completed in the baseline and two years after treatment. Dropouts after the 2 years' treatment were 5 of SLIT group and 4 of Control group respectively. SLIT group induced the significant reductions on both the symptom scores (7.81 ± 3.14 to 3.89 ± 2.01, P < 0.0 1) and the medication scores (2.86 ± 0.75 to 0.44 ± 0.06, P < 0.01). Meanwhile, Control group induced the reductions on both the symptom scores (8.01 ± 3.32 to 5.20 ± 2.43) and the medication scores (2.95 ± 0.80 to 1.75 ± 0.40). There were significant differences (P< 0. 01) in symptom and medication scores between the two groups after 2-year treatment. The patients in SLIT group had fewer symptoms and lower intake of medication. There were statistically significant differences in RQLQ between SLIT group [19 (15,22)] and Control group [36 (26,47)] after two years treatment (Z = -5. 21, P < 0.01). SLIT group also had significant improvement in RQLQ (Z = -6.10, P < 0.01) between before and after the treatment. There were 4 patients who showed adverse reactions in SLIT group (3 occurred in increment period, and 1 occurred in the maintenance period). The incidence of adverse reactions was 7.14%. No severe systemic side effects were registered. SLIT with standardized dermatophagoides farinae drops in China is safe and effective to patients with allergic rhinitis.

  16. Influence of different safety shoes on gait and plantar pressure: a standardized examination of workers in the automotive industry

    OpenAIRE

    Ochsmann, Elke; Noll, Ulrike; Ellegast, Rolf; Hermanns, Ingo; Kraus, Thomas

    2016-01-01

    Objective: Working conditions, such as walking and standing on hard surfaces, can increase the development of musculoskeletal complaints. At the interface between flooring and musculoskeletal system, safety shoes may play an important role in the well-being of employees. The aim of this study was to evaluate the effects of different safety shoes on gait and plantar pressure distributions on industrial flooring. Methods: Twenty automotive workers were individually fitted out with three differe...

  17. Role of renal function in risk assessment of target non-attainment after standard dosing of meropenem in critically ill patients: a prospective observational study.

    Science.gov (United States)

    Ehmann, Lisa; Zoller, Michael; Minichmayr, Iris K; Scharf, Christina; Maier, Barbara; Schmitt, Maximilian V; Hartung, Niklas; Huisinga, Wilhelm; Vogeser, Michael; Frey, Lorenz; Zander, Johannes; Kloft, Charlotte

    2017-10-21

    Severe bacterial infections remain a major challenge in intensive care units because of their high prevalence and mortality. Adequate antibiotic exposure has been associated with clinical success in critically ill patients. The objective of this study was to investigate the target attainment of standard meropenem dosing in a heterogeneous critically ill population, to quantify the impact of the full renal function spectrum on meropenem exposure and target attainment, and ultimately to translate the findings into a tool for practical application. A prospective observational single-centre study was performed with critically ill patients with severe infections receiving standard dosing of meropenem. Serial blood samples were drawn over 4 study days to determine meropenem serum concentrations. Renal function was assessed by creatinine clearance according to the Cockcroft and Gault equation (CLCR CG ). Variability in meropenem serum concentrations was quantified at the middle and end of each monitored dosing interval. The attainment of two pharmacokinetic/pharmacodynamic targets (100%T >MIC , 50%T >4×MIC ) was evaluated for minimum inhibitory concentration (MIC) values of 2 mg/L and 8 mg/L and standard meropenem dosing (1000 mg, 30-minute infusion, every 8 h). Furthermore, we assessed the impact of CLCR CG on meropenem concentrations and target attainment and developed a tool for risk assessment of target non-attainment. Large inter- and intra-patient variability in meropenem concentrations was observed in the critically ill population (n = 48). Attainment of the target 100%T >MIC was merely 48.4% and 20.6%, given MIC values of 2 mg/L and 8 mg/L, respectively, and similar for the target 50%T >4×MIC . A hyperbolic relationship between CLCR CG (25-255 ml/minute) and meropenem serum concentrations at the end of the dosing interval (C 8h ) was derived. For infections with pathogens of MIC 2 mg/L, mild renal impairment up to augmented renal function was

  18. Reactive Safety

    Directory of Open Access Journals (Sweden)

    Rüdiger Ehlers

    2011-06-01

    Full Text Available The distinction between safety and liveness properties is a fundamental classification with immediate implications on the feasibility and complexity of various monitoring, model checking, and synthesis problems. In this paper, we revisit the notion of safety for reactive systems, i.e., for systems whose behavior is characterized by the interplay of uncontrolled environment inputs and controlled system outputs. We show that reactive safety is a strictly larger class of properties than standard safety. We provide algorithms for checking if a property, given as a temporal formula or as a word or tree automaton, is a reactive safety property and for translating such properties into safety automata. Based on this construction, the standard verification and synthesis algorithms for safety properties immediately extend to the larger class of reactive safety.

  19. Does science speak clearly and fairly in trade and food safety disputes? The search for an optimal response of WTO adjudication to problematic international standard-making.

    Science.gov (United States)

    Ni, Kuei-Jung

    2013-01-01

    Most international health-related standards are voluntary per se. However, the incorporation of international standard-making into WTO agreements like the SPS Agreement has drastically changed the status and effectiveness of the standards. WTO members are urged to follow international standards, even when not required to comply fully with them. Indeed, such standards have attained great influence in the trade system. Yet evidence shows that the credibility of the allegedly scientific approach of these international standard-setting institutions, especially the Codex Alimentarius Commission (Codex) governing food safety standards, has been eroded and diluted by industrial and political influences. Its decision-making is no longer based on consensus, but voting. The adoption of new safety limits for the veterinary drug ractopamine in 2012, by a very close vote, is simply another instance of the problematic operations of the Codex. These dynamics have led skeptics to question the legitimacy of the standard setting body and to propose solutions to rectify the situation. Prior WTO rulings have yet to pay attention to the defect in the decision-making processes of the Codex. Nevertheless, the recent Appellate Body decision on Hormones II is indicative of a deferential approach to national measures that are distinct from Codex formulas. The ruling also rejects the reliance on those experts who authored the Codex standards to assess new measures of the European Community. This approach provides an opportunity to contemplate what the proper relationship between the WTO and Codex ought to be. Through a critical review of WTO rulings and academic proposals, this article aims to analyze how the WTO ought to define such interactions and respond to the politicized standard-making process in an optimal manner. This article argues that building a more systematic approach and normative basis for WTO judicial review of standard-setting decisions and the selection of technical

  20. Neutronic and Thermal-Hydraulic Safety Analysis for the Optimization of the Uranium Foil Target in the RSG-GAS Reactor

    Directory of Open Access Journals (Sweden)

    S. Pinem

    2016-12-01

    Full Text Available The G. A. Siwabessy Multipurpose Reactor (Reaktor Serba Guna G.A. Siwabessy, RSG-GAS has an average thermal neutron flux of 2×1014 neutron/(cm2 sec at the nominal power of 30 MW. With such a high thermal neutron flux, the reactor is suitable for the production of Mo-99 which is widely used as a medical diagnostic radioisotope. This paper describes a safety analysis to determine the optimum LEU foil target by using a coupled neutronic and thermal-hydraulic code, MTR-DYN. The code has been developed based on the three-dimensional multigroup neutron diffusion theory. The best estimated results can be achieved by using a coupled neutronic and thermal-hydraulic code. The calculation results show that the optimum LEU foil target is 54 g corresponding to the reactivity change of less than the limit value of 500 pcm. From the safety analysis for the case when the primary flow rate decreased by 15% from its nominal value, it was found that the peak temperatures of the coolant and cladding are 69.5°C and 127.9°C, respectively. It can be concluded that the optimum LEU foil target can be irradiated safely without exceeding the limit value.

  1. The relative efficacy and safety of targeted agents used in combination with chemotherapy in treating patients with untreated advanced gastric cancer: a network meta-analysis.

    Science.gov (United States)

    Xie, Shuping; Zhang, Huixiang; Wang, Xueyan; Ge, Quanxing; Hu, Junhong

    2017-04-18

    Gastric cancer is one of the leading mortal causes. Targeted therapy is a new type of cancer treatment, which precisely identifies and attacks cancer cells and significantly reduces side effects. In this network meta-analysis, we focused on the efficacy and safety of 12 targeted agents on gastric cancer among a total of 8,405 patients from 24 trials. Hazard ratio (HR) with 95% credible interval (CrI) were calculated for primary outcomes, including overall survival (OS) and progression-free survival (PFS), while odds ratio (OR) with 95% CrI were calculated for secondary outcomes. Surface under the cumulative ranking curve (SUCRA) were calculated to illustrate the rank probability of various agents for different outcomes. Compared with other analyzed treatments, ramucirumab is outstanding in survival outcomes. However, higher risk of hematological events should be noted during its application. Lapatinib is also efficacious in progression reduction, while it is always combined with severe gastrointestinal events. Trastuzumab is proposed for its high efficacy in improving survival rate and safety, which is proper for most patients. In conclusion, trastuzumab was recommended as the optimal targeted agent combined with chemotherapy for gastric cancer patients.

  2. TREATMENT EFFECTS OF WST11 VASCULAR TARGETED PHOTODYNAMIC THERAPY IN UROTHELIAL CELL CARCINOMA AND FEASIBILITY, SAFETY, AND LONG TERM OUTCOMES IN THE UPPER URINARY TRACT OF SWINE

    Science.gov (United States)

    Murray, Katie S; Winter, Ashley G; Corradi, Renato Beluco; LaRosa, Stephen; Jebiwott, Sylvia; Somma, Alexander; Takaki, Haruyuki; Srimathveeravalli, Govindarajan; Lepherd, Michelle; Monette, Sebastien; Kim, Kwanghee; Scherz, Avigdor; Coleman, Jonathan A

    2016-01-01

    Purpose Surgical management of upper tract urothelial carcinoma requires removal of kidney and ureter, compromising renal function. Non-surgical alternatives have potentially prohibitive safety concerns. We examine the feasibility and safety of ablation of the ureter and renal pelvis using endoluminal vascular-targeted photodynamic therapy in a porcine model and report efficacy of WST11 vascular-targeted photodynamic therapy in a murine model. Materials and Methods Following approval, we performed 28 endoluminal ablations in the ureters and renal pelvis of 18 swine. Intravenous infusion of WST11 (4mg/kg) followed by laser illumination (10 minutes) was performed via percutaneous access or retrograde ureteroscopic approach. Animals were followed clinically with laboratory testing, imaging and histology was evaluated at several post-ablation time points. A murine xenograft was created with the 5637 human urothelial cell carcinoma line to determine sensitivity to this therapy. Results At 24 hours, 50 mW/cm laser fluence produced superficial necrosis of the ureter and deeper necrosis (penetrating the muscularis propria or adventitia) was produced by treatment with 200 mW/cm in the ureter and renal pelvis. At 4 weeks, superficial urothelium had regenerated over the treatment site. No symptomatic obstruction, clinically relevant hydronephrosis, or abnormality of lab testing was noted up to 4 weeks. In mice, 80% had no evidence of tumor at 19 days after WST11 vascular-targeted photodynamic therapy. Conclusions Urothelial cell carcinoma appears to be sensitive to WST11 vascular-targeted photodynamic therapy. Depth of WST11 vascular-targeted photodynamic therapy treatment effects can be modulated in a dose-dependent manner by titration of light intensity. Moreover, this treatment modality, applied to the porcine upper urinary tract, is feasible via antegrade and retrograde access. PMID:26860792

  3. First meeting on the CRP 'standardized high current solid targets for cyclotron production of diagnostic and therapeutic radionuclides'

    International Nuclear Information System (INIS)

    Winkel, P. van den

    2000-01-01

    The Cyclotron Department of the VUB has three groups performing research in the field of target development, production of radionuclides and their application in nuclear medicine. 1. The Physics Group is busy on the optimization of beam parameters, on the determination of cross sections and on neutron spectrometry. 2. The Inorganic Radiochemistry Group performs research on solid target electroplating (Tl, Zn, Cd, Rh ... ), on optimisation of target carrier geometry and cooling and on automated PC-controlled radiochemistry (Tl-201, Ga-67, In-111) and recovery systems and the associated software written in Modula-2 and Visual Basic. 3. The Organic Radiochemistry Group develops new techniques for radiolabelling of organic molecules (fatty acids, neuroleptics, synthetic polypeptides...) useful in diagnostic and therapeutic nuclear medicine. All three groups take part in bulk productions of radionuclides

  4. Evolution of safety standards for the long-term management of nuclear waste, and their application in Ontario Power Generation

    International Nuclear Information System (INIS)

    Kempe, T.F.

    2006-01-01

    This paper examines the need to develop current radiation protection methodologies further in order to take account of the special features of long-term waste management. The need to expand the scope and nature of regulatory submissions is also addressed. It is concluded that an international consensus is emerging as to requirements for a safety case for long-term waste management, and on safety assessment approaches and criteria to be applied in the regulation of long-term waste management facilities. The application of some of this methodology in preliminary concept assessments carried out by OPG for long-term waste management facilities is described. (author)

  5. Practical implications of the ICRP recommendations (1977) and the revised IAEA basic safety standards for radiation protection

    International Nuclear Information System (INIS)

    1979-01-01

    Full text: The Seminar provided a forum for exchange of views concerning the practical problems associated with the implementation of the recommendations published in ICRP report No. 26 The papers presented and the discussions which followed will greatly help the IAEA, WHO, ILO and OECD/NEA to finalize the draft of the Basic Safety Standards for Radiation Protection. The papers and discussions centered mainly on three items - risk assessments and the associated detriment which might result from exposure to ionizing radiation as encountered in radiation work, optimization of protection; and some practical difficulties associated with the implementation of the recommendations Examples of the application of optimization were presented which helped clarify the methodology of optimizing protection. General and panel discussions helped to clarify the question of intuitive versus quantitative optimization. The consensus was that optimization of protection is mainly an intuitive operation, the quantitative tools being an aid to the process. These tools are more important in optimizing the design of installations and equipment, while the process is less quantitative in the case of optimization of operations. The value of the man-rem was discussed in a few papers and in panel and other discussions. It became clear that its value can be different in different cases of justification and different again in justification and optimization assessments. Therefore a range of values is needed rather than a single universal value. However, for optimization assessments where parts of the collective dose occur in different countries, the principal of geographical equity was advocated, implying the same value to the man-rem in all countries. Some papers and discussions centered around the identification and evaluation of detriment. Two types of detriment were identified, namely 'objective' detriment (composed of stochastic effects which could be assessed f r om knowledge of the

  6. When patient safety and skills development go hand in hand through targeted prevention and treatment of pressure ulcers in patients with spinal-cord injury

    DEFF Research Database (Denmark)

    Steensgaard, Randi; Bonne, Stine

    2017-01-01

    be prevented and patient safety increased. It has, however, proved difficult to achieve continuous and systematic PU/wound care. The Spinal Cord Injury Centre of Western Denmark has developed the PU/wound patrol, a new initiative that has also been tested and evaluated among the Centre’s nursing staff. Aims...... - to increase patient safety through conscious, targeted monitoring and treatment by nurses of all types of PU/wounds observed in patients at the Centre - to ensure a high degree of professionalism in rehabilitative nursing care given to patients with PU/wounds, by developing nursing skills Method The PU....../wound patrol consists of two experienced nurses who examine patients with PU/wounds each week, or every other week, alongside the care staff who work with the patient. The PU/wound patrol’s assistance consists in measuring, photographing, caring, treating, documenting the PU/wound. Furthermore they plan future...

  7. Depleted uranium. Protecting against all possible sources of ionizing radiation through the development and application of state-of-the-art safety standards

    International Nuclear Information System (INIS)

    2001-01-01

    Under its Statute the IAEA has the specific mandate to establish, in consultation and collaboration with other United Nations and specialized agencies concerned, standards for the protection against ionizing radiation and for the safety of radiation sources and to provide for the application of these standards. With respect to potential radiation hazards, the Agency has jointly developed the International Basic Safety Standards with the World Health Organization, and the Food and Agriculture Organization. These standards, known as the BSS, cover a wide range of situations that give rise or could give rise to exposure to radiation, such as the radiation hazard posed by depleted uranium (DU). Based on the information currently available, DU ammunitions do not appear to present a significant risk to health from a radiological point of view. Since only limited studies have been undertaken in post-conflict areas where DU ammunitions were used, further assessment and studies of DU in such areas would increase the confidence in this observation. In addition to radiological assessment, the IAEA is also developing a training course to assist Member States in analytical methods and techniques that could be used to detect and measure DU in post-conflict areas

  8. Safety Standard for Oxygen and Oxygen Systems: Guidelines for Oxygen System Design, Materials Selection, Operations, Storage, and Transportation

    Science.gov (United States)

    1996-01-01

    NASA's standard for oxygen system design, materials selection, operation, and transportation is presented. Minimum guidelines applicable to NASA Headquarters and all NASA Field Installations are contained.

  9. 78 FR 73692 - Revisions to Safety Standards for Infant Bath Seats, Toddler Beds, and Full-Size Baby Cribs

    Science.gov (United States)

    2013-12-09

    ... ``adult'' before the term ``caregiver'' in a provision that requires a warning to ``be located on the... Commission's Web site at: http://www.cpsc.gov/Global/Newsroom/FOIA/CommissionBriefingPackages/2012....gov/Global/Newsroom/FOIA/CommissionBriefingPackages/2012/ASTMRevisioinstoSafetyStandardsforDurable...

  10. 76 FR 11415 - Federal Motor Vehicle Safety Standards; Power-Operated Window, Partition, and Roof Panel Systems

    Science.gov (United States)

    2011-03-02

    ... automatic reversal systems (ARS) for power windows and to make a final decision. The agency has decided not... requirements for automatic reversal systems (ARS) and are withdrawing our 2009 proposal regarding ARS. This... safety in our ``Buying a Safer Car for Child Passengers'' brochure and at our new Web site ``Keeping Kids...

  11. Efficacy and safety of TachoSil® versus standard treatment of air leakage after pulmonary lobectomy

    DEFF Research Database (Denmark)

    Marta, Gabriel Mihai; Facciolo, Francesco; Ladegaard, Lars

    2010-01-01

    Alveolar air leakage remains a serious problem in lung surgery, being associated with increased postoperative morbidity, prolonged hospital stay and greater health-care costs. The aim of this study was to evaluate the sealing efficacy and safety of the surgical patch, TachoSil®, in lung surgery....

  12. 78 FR 2236 - Federal Motor Vehicle Safety Standards; New Pneumatic Tires for Motor Vehicles With a GVWR of...

    Science.gov (United States)

    2013-01-10

    ... Standards; New Pneumatic Tires for Motor Vehicles With a GVWR of More Than 4,536 Kilograms (10,000 Pounds... and replace a missing footnote in Table II. FMVSS No. 119 was amended in a final rule published on... Standard (FMVSS) No. 119, New pneumatic tires for motor vehicles with a gross vehicle weight rating (GVWR...

  13. Nuclear Safety

    International Nuclear Information System (INIS)

    1978-09-01

    In this short paper it has only been possible to deal in a rather general way with the standards of safety used in the UK nuclear industry. The record of the industry extending over at least twenty years is impressive and, indeed, unique. No other industry has been so painstaking in protection of its workers and in its avoidance of damage to the environment. Headings are: introduction; how a nuclear power station works; radiation and its effects (including reference to ICRP, the UK National Radiological Protection Board, and safety standards); typical radiation doses (natural radiation, therapy, nuclear power programme and other sources); safety of nuclear reactors - design; key questions (matters of concern which arise in the public mind); safety of operators; safety of people in the vicinity of a nuclear power station; safety of the general public; safety bodies. (U.K.)

  14. Model Regulations for the Use of Radiation Sources and for the Management of the Associated Radioactive Waste. Supplement to IAEA Safety Standards Series No. GS-G-1.5

    International Nuclear Information System (INIS)

    2013-12-01

    IAEA Safety Standards Series No. GSR Part 1, Governmental, Legal and Regulatory Framework for Safety, requires that governments establish laws and statutes to make provisions for an effective governmental, legal and regulatory framework for safety. The framework for safety includes the establishment of a regulatory body. The regulatory body has the authority and responsibility for promulgating regulations, and for preparing their implementation. This publication provides advice on an appropriate set of regulations covering all aspects of the use of radiation sources and the safe management of the associated radioactive waste. The regulations provide the framework for the regulatory requirements and conditions to be incorporated into individual authorizations for the use of radiation sources in industry, medical facilities, research and education and agriculture. The regulations also establish criteria to be used for assessing compliance. This publication allows States to appraise the adequacy of their existing regulations and regulatory guides, and can be used as a reference for those States developing regulations for the first time. The regulations set out in this publication will need to be adapted to take account of local conditions, technical resources and the scale of facilities and activities in the State. The set of regulations in this publication is based on the requirements established in the IAEA safety standards series, in particular in IAEA Safety Standards Series No. GSR Part 3 (Interim), Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards, in IAEA Safety Standards Series No. GSR Part 5, Predisposal Management of Radioactive Waste, and in IAEA Safety Standards Series No. SSR-5, Disposal of Radioactive Waste. They are also derived from the Code of Conduct of the Safety and Security of Radiation Sources and the Guidance on the Import and Export of Radioactive Sources. This publication allows States to appraise the

  15. Model Regulations for the Use of Radiation Sources and for the Management of the Associated Radioactive Waste. Supplement to IAEA Safety Standards Series No. GS-G-1.5

    International Nuclear Information System (INIS)

    2015-01-01

    IAEA Safety Standards Series No. GSR Part 1, Governmental, Legal and Regulatory Framework for Safety, requires that governments establish laws and statutes to make provisions for an effective governmental, legal and regulatory framework for safety. The framework for safety includes the establishment of a regulatory body. The regulatory body has the authority and responsibility for promulgating regulations, and for preparing their implementation. This publication provides advice on an appropriate set of regulations covering all aspects of the use of radiation sources and the safe management of the associated radioactive waste. The regulations provide the framework for the regulatory requirements and conditions to be incorporated into individual authorizations for the use of radiation sources in industry, medical facilities, research and education and agriculture. The regulations also establish criteria to be used for assessing compliance. This publication allows States to appraise the adequacy of their existing regulations and regulatory guides, and can be used as a reference for those States developing regulations for the first time. The regulations set out in this publication will need to be adapted to take account of local conditions, technical resources and the scale of facilities and activities in the State. The set of regulations in this publication is based on the requirements established in the IAEA safety standards series, in particular in IAEA Safety Standards Series No. GSR Part 3 (Interim), Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards, in IAEA Safety Standards Series No. GSR Part 5, Predisposal Management of Radioactive Waste, and in IAEA Safety Standards Series No. SSR-5, Disposal of Radioactive Waste. They are also derived from the Code of Conduct of the Safety and Security of Radiation Sources and the Guidance on the Import and Export of Radioactive Sources. This publication allows States to appraise the

  16. Standard Review Plan for the review of a license application for a low-level radioactive waste disposal facility: Safety analysis report

    International Nuclear Information System (INIS)

    1988-01-01

    The Standard Review Plan (SRP) (NUREG-1200) provides guidance to staff reviewers in the Office of Nuclear Material Safety and Safeguards who perform safety reviews of applications to construct and operate low-level radioactive waste disposal facilities. The SRP ensures the quality and uniformity of the staff reviews and presents a well-defined base from which to evaluate proposed changes in the scope and requirements of the staff reviews. The SRP makes information about the regulatory licensing process widely available and serves to improve the understanding of the staff's review process by interested members of the public and the industry. Each individual SRP addresses the responsibilities of persons performing the review, the matters that are reviewed, the Commission's regulations and acceptance criteria necessary for the review, how the review is accomplished, the conclusions that are appropriate, and the implementation requirements

  17. The influence of floodplain vegetation succession on hydraulic roughness: is ecosystem rehabilitation in Dutch embanked floodplains compatible with flood safety standards?

    Science.gov (United States)

    Makaske, Bart; Maas, Gilbert J; van den Brink, Claus; Wolfert, Henk P

    2011-06-01

    Here, we show for one of the Dutch Rhine River branches that large-scale riverine ecosystem rehabilitation and related vegetation succession may lead to up to 0.6 m higher river flood levels, because of increased hydraulic roughness. We hydraulically modeled future succession stages of embanked floodplain vegetation, following from present ecosystem rehabilitation plans for the 124-km-long river IJssel, and found flood levels exceeding the safety levels (related to dike heights). Our models take into account river engineering measures that are presently carried out, aimed at enhancing the river discharge capacity in order to meet required safety standards. Our study shows that there is a pressing need for integrated hydraulic-ecological evaluation of river engineering measures and ecosystem rehabilitation plans in the Rhine embanked floodplains. An important conclusion also is that hydraulic evaluation of planned vegetation goals only is inadequate, because flow resistance of preceding succession stages may be higher.

  18. Standard review plan for the review of a license application for a low-level radioactive waste disposal facility: Safety analysis report

    International Nuclear Information System (INIS)

    1987-01-01

    The Standard Review Plan (SRP) (NUREG-1200) provides guidance to staff reviewers in the Office of Nuclear Material Safety and Safeguards who perform safety reviews of applications to construct and operate low-level radioactive waste disposal facilities. The SRP ensures the quality and uniformity of the staff reviews and presents a well-defined base from which to evaluate proposed changes in the scope and requirements of the staff reviews. The SRP makes information about the regulatory licensing process widely available and serves to improve the understanding of the staff's review process by interested members of the public and the nuclear power industry. Each individual SRP addresses the responsibilities of persons performing the review, the matters that are reviewed, the Commission's regulations and acceptance criteria necessary for the review, how the review is accomplished, the conclusions that are appropriate, and the implementation requirements

  19. Creating symbiosis in research and education. Preserve nuclear competencies for Germany and provide highest safety standards to international markets

    International Nuclear Information System (INIS)

    Niessen, Stefan

    2015-01-01

    AREVA participates actively in networks of industry and science via university cooperation and gives new ideas born from practical experience for the academic training of future nuclear engineers. Thus, the company ensures both the availability of new talents for its export strategy and relevant expertise for nuclear safety in Germany. When it comes to education and science after the German nuclear phase-out decision, the efforts must focus on internationalization. Greater integration in international networks can contribute to keeping the nuclear know-how in Germany alive. This concerns both industry and science. By having foreign experts use German training facilities, participate in research projects and gather professional practice, they contribute to the safe operation here and experience first-hand our safety culture grown over decades. In this context, AREVA outlines its university cooperation in Germany and abroad.

  20. Creating symbiosis in research and education. Preserve nuclear competencies for Germany and provide highest safety standards to international markets

    Energy Technology Data Exchange (ETDEWEB)

    Niessen, Stefan [AREVA GmbH, Erlangen (Germany). Research and Development, Innovations and Patent Management

    2015-06-15

    AREVA participates actively in networks of industry and science via university cooperation and gives new ideas born from practical experience for the academic training of future nuclear engineers. Thus, the company ensures both the availability of new talents for its export strategy and relevant expertise for nuclear safety in Germany. When it comes to education and science after the German nuclear phase-out decision, the efforts must focus on internationalization. Greater integration in international networks can contribute to keeping the nuclear know-how in Germany alive. This concerns both industry and science. By having foreign experts use German training facilities, participate in research projects and gather professional practice, they contribute to the safe operation here and experience first-hand our safety culture grown over decades. In this context, AREVA outlines its university cooperation in Germany and abroad.

  1. Implementation in Russia and the European Union of International Safety Standards of Identity Documents with Biometric Data: Legal Regulation and Perspectives

    Directory of Open Access Journals (Sweden)

    Alexander Grigoryevich Volevodz

    2015-01-01

    Full Text Available The article contains the findings of a research into particular aspects of use of identity documents with personal biometric data. It considers the international safety standards of documents with biometric data worked out by the International Civil Aviation Organization (ICAO, pursuant to which those data should be included into machine-readable documents used by their holders for travel to various states. It contains the information on the implementation of these international standards in Russian and European Union law. The author has substantiated a conclusion to the effect that the procedure established in Russia for production and issuance, as well as for use of international, diplomatic and service passports identifying the Russian Federation citizen outside the Russian Federation territory, containing electronic information carriers with personal and biometric personal data, currently conforms to the international safety standards of documents with biometric data. The article surveys the experience of introducing domestic biometric identity documents - electronic passports in various countries of the world, and the problems arising therefrom. It substantiates the advantages and disadvantages of determining a passport of the Russian Federation citizen issued in the form of an identity card with an electronic information carrier, as the main document of the Russian Federation citizen identifying him domestically within the country's territory.

  2. ORNL necessary and sufficient standards for environment, safety, and health. Final report of the Identification Team for other industrial, radiological, and non-radiological hazard facilities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    This Necessary and Sufficient (N and S) set of standards is for Other Industrial, Radiological, and Non-Radiological Hazard Facilities at Oak Ridge National Laboratory (ORNL). These facility classifications are based on a laboratory-wide approach to classify facilities by hazard category. An analysis of the hazards associated with the facilities at ORNL was conducted in 1993. To identify standards appropriate for these Other Industrial, Radiological, and Non-Radiological Hazard Facilities, the activities conducted in these facilities were assessed, and the hazards associated with the activities were identified. A preliminary hazards list was distributed to all ORNL organizations. The hazards identified in prior hazard analyses are contained in the list, and a category of other was provided in each general hazard area. A workshop to assist organizations in properly completing the list was held. Completed hazard screening lists were compiled for each ORNL division, and a master list was compiled for all Other Industrial, Radiological Hazard, and Non-Radiological facilities and activities. The master list was compared against the results of prior hazard analyses by research and development and environment, safety, and health personnel to ensure completeness. This list, which served as a basis for identifying applicable environment, safety, and health standards, appears in Appendix A.

  3. ORNL necessary and sufficient standards for environment, safety, and health. Final report of the Identification Team for other industrial, radiological, and non-radiological hazard facilities

    International Nuclear Information System (INIS)

    1998-07-01

    This Necessary and Sufficient (N and S) set of standards is for Other Industrial, Radiological, and Non-Radiological Hazard Facilities at Oak Ridge National Laboratory (ORNL). These facility classifications are based on a laboratory-wide approach to classify facilities by hazard category. An analysis of the hazards associated with the facilities at ORNL was conducted in 1993. To identify standards appropriate for these Other Industrial, Radiological, and Non-Radiological Hazard Facilities, the activities conducted in these facilities were assessed, and the hazards associated with the activities were identified. A preliminary hazards list was distributed to all ORNL organizations. The hazards identified in prior hazard analyses are contained in the list, and a category of other was provided in each general hazard area. A workshop to assist organizations in properly completing the list was held. Completed hazard screening lists were compiled for each ORNL division, and a master list was compiled for all Other Industrial, Radiological Hazard, and Non-Radiological facilities and activities. The master list was compared against the results of prior hazard analyses by research and development and environment, safety, and health personnel to ensure completeness. This list, which served as a basis for identifying applicable environment, safety, and health standards, appears in Appendix A

  4. Safety Analysis of 'Older/Aged' Handling and Transportation Equipment for Heavy Loads, Radioactive Waste and Materials in Accordance with German Nuclear Standards KTA 3902, 3903 and 3905

    International Nuclear Information System (INIS)

    Macias, P.; Prucker, E.; Stang, W.

    2006-01-01

    The purpose of this paper is to present a general safety analysis of important handling and transportation processes and their related equipment ('load chains' consisting of cranes, load-bearing equipment and load-attaching points). This project was arranged by the responsible Bavarian ministry for environment, health and consumer protection (StMUGV) in agreement with the power plant operators of all Bavarian nuclear power plants to work out potential safety improvements. The range of the equipment (e.g. reactor building, crane, refuelling machine, load-bearing equipment and load-attaching points) covers the handling and transportation of fuel elements (e. g. with fuel flasks), heavy loads (e.g. reactor pressure vessel closure head, shielding slabs) and radioactive materials and waste (e.g. waste flasks, control elements, fuel channels, structure elements). The handling equipment was subjected to a general safety analysis taking into account the ageing of the equipment and the progress of standards. Compliance with the current valid requirements of the state of science and technology as required by German Atomic Act and particularly of the nuclear safety KTA-standards (3902, 3903 and 3905) was examined. The higher protection aims 'safe handling and transportation of heavy loads and safe handling of radioactive materials and waste' of the whole analysis are to avoid a criticality accident, the release of radioactivity and inadmissible effects on important technical equipment and buildings. The scope of the analysis was to check whether these protection aims were fulfilled for all important technical handling and transportation processes. In particularly the design and manufacturing of the components and the regulations of the handling itself were examined. (authors)

  5. Intra-Target Microdosing - A Novel Drug Development Approach: Proof of Concept, Safety, and Feasibility Study in Humans.

    Science.gov (United States)

    Burt, T; MacLeod, D; Lee, K; Santoro, A; DeMasi, D K; Hawk, T; Feinglos, M; Rowland, M; Noveck, R J

    2017-09-01

    Intra-Target Microdosing (ITM) is a novel drug development approach aimed at increasing the efficiency of first-in-human (FIH) testing of new molecular entities (NMEs). ITM combines intra-target drug delivery and "microdosing," the subpharmacological systemic exposure. We hypothesized that when the target tissue is small (about 1/100th of total body mass), ITM can lead to target therapeutic-level exposure with minimal (microdose) systemic exposure. Each of five healthy male volunteers received insulin microdose into the radial artery or full therapeutic dose intravenously in separate visits. Insulin and glucose levels were similar between systemic administration and ITM administration in the ipsilateral hand, and glucose levels demonstrated a reduction in the ipsilateral hand but not in the contralateral hand. Positron emission tomography (PET) imaging of 18 F-fluorodeoxyglucose (FDG) uptake demonstrated differences between the ipsilateral and contralateral arms. The procedures were safe and well-tolerated. Results are consistent with ITM proof-of-concept (POC) and demonstrate the ethical, regulatory, and logistical feasibility of the approach. © 2017 The Authors. Clinical and Translational Science published by Wiley Periodicals, Inc. on behalf of American Society for Clinical Pharmacology and Therapeutics.

  6. International trade standards for commodities and products derived from animals: the need for a system that integrates food safety and animal disease risk management.

    Science.gov (United States)

    Thomson, G R; Penrith, M-L; Atkinson, M W; Thalwitzer, S; Mancuso, A; Atkinson, S J; Osofsky, S A

    2013-12-01

    A case is made for greater emphasis to be placed on value chain management as an alternative to geographically based disease risk mitigation for trade in commodities and products derived from animals. The geographic approach is dependent upon achievement of freedom in countries or zones from infectious agents that cause so-called transboundary animal diseases, while value chain-based risk management depends upon mitigation of animal disease hazards potentially associated with specific commodities or products irrespective of the locality of production. This commodity-specific approach is founded on the same principles upon which international food safety standards are based, viz. hazard analysis critical control points (HACCP). Broader acceptance of a value chain approach enables animal disease risk management to be combined with food safety management by the integration of commodity-based trade and HACCP methodologies and thereby facilitates 'farm to fork' quality assurance. The latter is increasingly recognized as indispensable to food safety assurance and is therefore a pre-condition to safe trade. The biological principles upon which HACCP and commodity-based trade are based are essentially identical, potentially simplifying sanitary control in contrast to current separate international sanitary standards for food safety and animal disease risks that are difficult to reconcile. A value chain approach would not only enable more effective integration of food safety and animal disease risk management of foodstuffs derived from animals but would also ameliorate adverse environmental and associated socio-economic consequences of current sanitary standards based on the geographic distribution of animal infections. This is especially the case where vast veterinary cordon fencing systems are relied upon to separate livestock and wildlife as is the case in much of southern Africa. A value chain approach would thus be particularly beneficial to under-developed regions of

  7. Measuring Health Information Dissemination and Identifying Target Interest Communities on Twitter: Methods Development and Case Study of the @SafetyMD Network.

    Science.gov (United States)

    Kandadai, Venk; Yang, Haodong; Jiang, Ling; Yang, Christopher C; Fleisher, Linda; Winston, Flaura Koplin

    2016-05-05

    Little is known about the ability of individual stakeholder groups to achieve health information dissemination goals through Twitter. This study aimed to develop and apply methods for the systematic evaluation and optimization of health information dissemination by stakeholders through Twitter. Tweet content from 1790 followers of @SafetyMD (July-November 2012) was examined. User emphasis, a new indicator of Twitter information dissemination, was defined and applied to retweets across two levels of retweeters originating from @SafetyMD. User interest clusters were identified based on principal component analysis (PCA) and hierarchical cluster analysis (HCA) of a random sample of 170 followers. User emphasis of keywords remained across levels but decreased by 9.5 percentage points. PCA and HCA identified 12 statistically unique clusters of followers within the @SafetyMD Twitter network. This study is one of the first to develop methods for use by stakeholders to evaluate and optimize their use of Twitter to disseminate health information. Our new methods provide preliminary evidence that individual stakeholders can evaluate the effectiveness of health information dissemination and create content-specific clusters for more specific targeted messaging.

  8. Aiming at a moving target: research ethics in the context of evolving standards of care and prevention.

    Science.gov (United States)

    Shah, Seema; Lie, Reidar K

    2013-11-01

    In rapidly evolving medical fields where the standard of care or prevention changes frequently, guidelines are increasingly likely to conflict with what participants receive in research. Although guidelines typically set the standard of care, there are some cases in which research can justifiably deviate from guidelines. When guidelines conflict with research, an ethical issue only arises if guidelines are rigorous and should be followed. Next, it is important that the cumulative evidence and the conclusions reached by the guidelines do not eliminate the need for further research. Even when guidelines are rigorous and the study still asks an important question, we argue that there may be good reasons for deviations in three cases: (1) when research poses no greater net risk than the standard of care; (2) when there is a continued need for additional evidence, for example, when subpopulations are not covered by the guidelines; and (3) less frequently, when clinical practice guidelines can be justified by the evidence, but practitioners disagree about the guidelines, and the guidelines are not consistently followed as a result. We suggest that procedural protections may be especially useful in deciding when studies in the third category can proceed.

  9. Performing daily prostate targeting with a standard V-EPID and an automated radio-opaque marker detection algorithm

    International Nuclear Information System (INIS)

    Beaulieu, Luc; Girouard, Louis-Martin; Aubin, Sylviane; Aubry, Jean-Francois; Brouard, Lucie; Roy-Lacroix, Lise; Dumont, Jean; Tremblay, Daniel; Laverdiere, Jacques; Vigneault, Eric

    2004-01-01

    Online prostate positioning using gold markers and a standard video-based electronic portal imaging device is reported. The average systematic (random) errors have been reduced from 2.1 mm (2.7 mm) to 0.5 mm (1.5 mm) in AP direction, 1.1 mm (1.7 mm) to 0.7 mm (1.2 mm) SI and 1.2 mm (1.7 mm) to 0.6 mm (1.3 mm) LR

  10. A randomized, open, parallel group, multicenter trial to investigate analgesic efficacy and safety of a new transdermal fentanyl patch compared to standard opioid treatment in cancer pain

    DEFF Research Database (Denmark)

    Kress, H.G.; Laage, D. Von der; Hoerauf, K.H.

    2008-01-01

    A new 72-hour transdermal fentanyl matrix patch has been designed, which has a 35%-50% reduction of the absolute fentanyl content compared with other currently available transdermal fentanyl patches that are using the matrix technology. The new patch has previously been shown...... to be pharmacokinetically bioequivalent to the marked fentanyl patch. To determine noninferiority in efficacy in cancer patients and to compare safety, a clinical trial comparing the new fentanyl patch with standard oral or transdermal opioid treatment was planned. The design was an open, parallel group, multicenter trial......, in which 220 patients were randomized to receive either the fentanyl patch or standard opioid treatment for 30 days. The primary efficacy variable, pain intensity (PI) on a 0-10-point numerical rating scale, was recorded once daily. The primary endpoint was the relative area under the curve of PI expressed...

  11. Conformal treatment of prostate cancer with improved targeting: superior prostate-specific antigen response compared to standard treatment

    International Nuclear Information System (INIS)

    Corn, Benjamin W.; Hanks, Gerald E.; Schultheiss, Timothy E.; Hunt, Margie A.; Lee, W. Robert; Coia, Lawrence R.

    1995-01-01

    Purpose: Conformal radiation therapy (CRT) decreases the morbidity of prostate cancer treatment, but no published data attest to the improved ability of CRT to control disease. Therefore, we compared Prostate-Specific Antigen (PSA) response at 1 year among similarly staged patients treated by conformal techniques to those treated with conventional approaches, looking for an early indicator of tumor response. Method and Materials: Patients with locally advanced disease were treated by pelvic fields followed by prostate field conedowns; those with early stage/low grade disease received only prostate field irradiation. Between October, 1987 and November, 1991, conventional treatments used rectangular beams with or without corner blocks. Neither urethrography nor immobilization casts were used for conventionally treated patients. Between April, 1989 and December, 1992, conformal treatments have used rigid immobilization and Computed Tomography-based, beams-eye-view field design. As such, our conformal approach allowed improved targeting. Median prescribed doses (minimal doses to the Planning Target Volume) were 70 Gy (66-73 Gy) and 70.2 Gy (64.8-75 Gy) for conventionally and conformally treated patients, respectively. Median daily fraction size was 1.8 Gy for conventional treatment and 2.0 Gy for conformal therapy. Baseline PSA data were available on 170 consecutive patients treated conformally and 90 consecutive patients treated conventionally. Results: Among those receiving only prostatic field irradiation, 12-month PSA values returned to normal in 96% and 85% of conformally and conventionally treated patients, respectively, when normalization was defined as ≤ 4 ng/ml (p 15), and the use of conformal irradiation were statistically significant prognostic discriminants of PSA normalization at 1 year while total irradiation dose, clinical stage, and the addition of pelvic fields were not significant. Conclusions: As measured by PSA normalization, conformal techniques

  12. Robustness and precision of an automatic marker detection algorithm for online prostate daily targeting using a standard V-EPID.

    Science.gov (United States)

    Aubin, S; Beaulieu, L; Pouliot, S; Pouliot, J; Roy, R; Girouard, L M; Martel-Brisson, N; Vigneault, E; Laverdière, J

    2003-07-01

    An algorithm for the daily localization of the prostate using implanted markers and a standard video-based electronic portal imaging device (V-EPID) has been tested. Prior to planning, three gold markers were implanted in the prostate of seven patients. The clinical images were acquired with a BeamViewPlus 2.1 V-EPID for each field during the normal course radiotherapy treatment and are used off-line to determine the ability of the automatic marker detection algorithm to adequately and consistently detect the markers. Clinical images were obtained with various dose levels from ranging 2.5 to 75 MU. The algorithm is based on marker attenuation characterization in the portal image and spatial distribution. A total of 1182 clinical images were taken. The results show an average efficiency of 93% for the markers detected individually and 85% for the group of markers. This algorithm accomplishes the detection and validation in 0.20-0.40 s. When the center of mass of the group of implanted markers is used, then all displacements can be corrected to within 1.0 mm in 84% of the cases and within 1.5 mm in 97% of cases. The standard video-based EPID tested provides excellent marker detection capability even with low dose levels. The V-EPID can be used successfully with radiopaque markers and the automatic detection algorithm to track and correct the daily setup deviations due to organ motions.

  13. The Impact Of Occupational Hazards In Workplaces - Maintenance, A Main Target For Ensuring The Safety Of Working Equipment

    Science.gov (United States)

    Antonov, Anca Elena; Buica, Georgeta; Darabont, Doru Costin; Beiu, Constantin

    2015-07-01

    For use of work equipment having the economic performance and the highest level of safety, it must be ensured that it complies with the conditions set by the manufacturer in terms of putting into service, use and maintenance operations, ensuring appropriate technical and environmental requirements, including appropriate measures and means of protection. The research aimed to identify and analyze the occupational hazards associated to maintenance operations, in terms of the history of the adjustments, maintenance, cleaning and repair, including the case that occur after the incidents, capital repairs and upgrades. The results of the research consisted in the development of recommendations on the effective management of maintenance activities of work equipment and a software model to enable an efficient management of maintenance, as a tool for occupational hazards in companies - premise for increasing the competitiveness of employers in the market economy.

  14. Towards spatial isolation design in a multi-core real-time kernel targeting safety-critical applications

    DEFF Research Database (Denmark)

    Li, Gang; Top, Søren

    2013-01-01

    In mixed-criticality systems, applications naturally have different safety criticality levels. Partitioning technology is usually used to enable the integration of such mixed criticality applications upon one platform, aiming at reducing hardware, power consumption and especially certification cost....... Partitioning can prevent fault propagation among mixed-criticality applications, if spatial and temporal isolation are adequately ensured. This paper focuses on the solution of spatial isolation in the HARTEX kernel on a multi-core platform in terms of memory, communication between applications and I/O sharing....... According to formulated isolation requirements, a simple partitioning multi-core hardware architecture is proposed using SoC and memory protection units, and the kernel is extended to support spatial isolation between the kernel and applications as well as between applications. Combined design of hardware...

  15. Efficacy and safety of transepithelial corneal collagen crosslinking surgery versus standard corneal collagen crosslinking surgery for keratoconus: a meta-analysis of randomized controlled trials.

    Science.gov (United States)

    Li, Wenwei; Wang, Bin

    2017-12-28

    The aim of this study was to evaluate the efficacy and safety of transepithelial corneal collagen crosslinking (transepithelial CXL) versus standard corneal collagen crosslinking (epithelium-off CXL) on keratoconus. Eligible studies were identified by systematically searching PubMed, the Cochrane Library and Embase. Topographic parameters, corrected distant visual acuity (CDVA), uncorrected distant visual acuity (UDVA), and corneal thickness (CT) were assessed by the pooled weighted mean differences (WMDs) of the change from baseline to the end of follow up. Quality was assessed according to Cochrane handbook. And we used Review Manager to analysis the included trials. Three trials involving 244 eyes were evaluated, with 111 eyes in the standard CXL group and 133 eyes in the transepithelial CXL group. The pooled results showed that there were significant differences between the two groups in maximum keratometry (mean difference = 1.05D, 95% CI 0.19 to 1.92, P = 0.02)),and the standard CXL is more effective in decreasing the maximum keratometry at least 12 months after operation; the transepithelial CXL group gained more improvement in CDVA (mean difference = -0.07, 95% CI -0.12 to -0.02, P = 0.007);there were no significant differences in uncorrected distant visual acuity (UDVA) between the two groups (mean difference = -0.03, 95% CI -0.20 to 0.15, P = 0.75). A similar change was found in corneal thickness (mean difference = 4.35, 95% CI -0.43 to 9.13, P = 0.07)). The standard CXL is more effective in decreasing the maximum keratometry than the transepithelial CXL; the transepithelial CXL provided favorable visual outcomes; they both exhibit similar safety.

  16. The Targeted SMAC Mimetic SW IV-134 is a strong enhancer of standard chemotherapy in pancreatic cancer.

    Science.gov (United States)

    Hashim, Yassar M; Vangveravong, Suwanna; Sankpal, Narendra V; Binder, Pratibha S; Liu, Jingxia; Goedegebuure, S Peter; Mach, Robert H; Spitzer, Dirk; Hawkins, William G

    2017-01-17

    Pancreatic cancer is a lethal malignancy that frequently acquires resistance to conventional chemotherapies often associated with overexpression of inhibitors of apoptosis proteins (IAPs). We have recently described a novel means to deliver second mitochondria-derived activator of caspases (SMAC) mimetics selectively to cancer cells employing the sigma-2 ligand/receptor interaction. The intrinsic death pathway agonist SMAC offers an excellent opportunity to counteract the anti-apoptotic activity of IAPs. SMAC mimetics have been used to sensitize several cancer types to chemotherapeutic agents but cancer-selective delivery and appropriate cellular localization have not yet been considered. In our current study, we tested the ability of the sigma-2/SMAC drug conjugate SW IV-134 to sensitize pancreatic cancer cells to gemcitabine. Using the targeted SMAC mimetic SW IV-134, inhibition of the X-linked inhibitor of apoptosis proteins (XIAP) was induced pharmacologically and its impact on cell viability was studied alone and in combination with gemcitabine. Pathway analyses were performed by assessing caspase activation, PARP cleavage and membrane blebbing (Annexin-V), key components of apoptotic cell death. Single-agent treatment regimens were compared with combination therapy in a preclinical mouse model of pancreatic cancer. The sensitizing effect of XIAP interference toward gemcitabine was confirmed via pharmacological intervention using our recently designed, targeted SMAC mimetic SW IV-134 across a wide range of commonly used pancreatic cancer cell lines at concentrations where the individual drugs showed only minimal activity. On a mechanistic level, we identified involvement of key components of the apoptosis machinery during cell death execution. Furthermore, combination therapy proved superior in decreasing the tumor burden and extending the lives of the animals in a preclinical mouse model of pancreatic cancer. We believe that the strong sensitizing capacity of

  17. Phase 2 safety trial targeting amyloid beta production with a gamma-secretase inhibitor in Alzheimer disease.

    Science.gov (United States)

    Fleisher, Adam S; Raman, Rema; Siemers, Eric R; Becerra, Lida; Clark, Christopher M; Dean, Robert A; Farlow, Martin R; Galvin, James E; Peskind, Elaine R; Quinn, Joseph F; Sherzai, Abdullah; Sowell, B Brooke; Aisen, Paul S; Thal, Leon J

    2008-08-01

    To evaluate the safety, tolerability, and amyloid beta (Abeta) response to the gamma-secretase inhibitor LY450139 in Alzheimer disease. Multicenter, randomized, double-blind, dose-escalation, placebo-controlled trial. Community-based clinical research centers. Patients Fifty-one individuals with mild to moderate Alzheimer disease were randomized to receive placebo (n=15) or LY450139 (100 mg [n=22] or 140 mg [n=14]), with 43 completing the treatment phase. Intervention The LY450139 groups received 60 mg/d for 2 weeks, then 100 mg/d for 6 weeks, and then either 100 or 140 mg/d for 6 additional weeks. Primary outcome measures were adverse events, plasma and cerebrospinal fluid Abeta levels, vital signs, electrocardiographic data, and laboratory safety test results. Secondary outcome measures included the Alzheimer's Disease Assessment Scale cognitive subscale and the Alzheimer's Disease Cooperative Study Activities of Daily Living Scale. Group differences were seen in skin and subcutaneous tissue concerns (P=.05), including 3 possible drug rashes and 3 reports of hair color change in the treatment groups. There were 3 adverse event-related discontinuations, including 1 transient bowel obstruction. The plasma Abeta(40) concentration was reduced by 58.2% for the 100-mg group and 64.6% for the 140-mg group (P<.001). No significant reduction was seen in cerebrospinal fluid Abeta levels. No group differences were seen in cognitive or functional measures. LY450139 was generally well tolerated at doses of up to 140 mg/d for 14 weeks, with several findings indicating the need for close clinical monitoring in future studies. Decreases in plasma Abeta concentrations were consistent with inhibition of gamma-secretase. Trial Registration clinicaltrials.gov Identifier: NCT00244322.

  18. Phase II safety trial targeting amyloid beta production with a gamma-secretase inhibitor in Alzheimer's disease

    Science.gov (United States)

    Fleisher, Adam S.; Raman, Rema; Siemers, Eric R.; Becerra, Lida; Clark, Christopher M.; Dean, Robert A; Farlow, Martin R.; Galvin, James E.; Peskind, Elaine R.; Quinn, Joseph F.; Sherzai, Abdullah; Sowell, B. Brooke; Aisen, Paul S.; Thal, Leon J.

    2009-01-01

    Objective Evaluate the safety, tolerability and amyloid beta (Aβ) response to a γ-secretase inhibitor (LY450139) in Alzheimer's disease. Design Multi-center, randomized, double-blind, dose-escalation, placebo-controlled trial. Setting Community based clinical research centers. Participants 51 participants with mild to moderate AD were randomized (placebo=15, 100mg=22, 140mg=14), with 43 completing the treatment phase. Intervention Subjects randomized to LY450139 received 60mg daily for 2 weeks followed by 100mg for 6 weeks, then re-randomized to 100mg or 140mg for 6 additional weeks. Main Outcome Measures Primary outcome measures consisted of adverse events, plasma and cerebrospinal fluid Aβ levels, vital signs, electrocardiogram data, and laboratory safety tests. Secondary outcome measures included the ADAS-cognitive subscale and the ADCS-Activities of Daily Living scale. Results Group differences were seen in “skin and subcutaneous tissue” complaints (p=0.052). These included 3 possible drug rashes and 3 reports of hair color change in the treatment groups. There were 3 adverse-event-related discontinuations, including one report of transient bowel obstruction. Plasma Aβ40 was reduced by 58.2% for the 100mg group and 64.6% for the 140mg group (P<0.001). No significant reduction was seen in CSF Aβ. No group differences were seen in cognitive or functional measures. Conclusions LY450139 was generally well tolerated at doses of up to 140mg taken daily for 14 weeks with several findings indicating the need for close clinical monitoring in future studies. Decreases in plasma Aβ concentrations were consistent with inhibition of γ-secretase. PMID:18695053

  19. Gibbs and Hill Standard Safety Analysis Report, GIBBSSAR. License application, volume 1: chapters 1--3 (section 7)

    International Nuclear Information System (INIS)

    1977-01-01

    License application for the GIBBSSAR Standard Plant is presented. The reactor used with the GIBBSSAR balance-of-plant system is the Westinghouse 3800 MW(t) PWR. This portion of the application includes a general plant description; site characteristics; and design of structures, components, equipment and systems

  20. 78 FR 16051 - Vehicle/Track Interaction Safety Standards; High-Speed and High Cant Deficiency Operations

    Science.gov (United States)

    2013-03-13

    ...: Serve as practical standards with sound physical and mathematical bases; account for a range of vehicle... mild curve at high speed. However, the onboard sensors, installed per specification on every truck, did... the last few decades, computer models of rail vehicles interacting with track have become practical...