WorldWideScience

Sample records for tailings management facility

  1. Decommissioning: A critical component of the design for uranium tailings management facilities

    International Nuclear Information System (INIS)

    Clifton, A.W.; Barsi, R.G.; Misfeldt, G.A.

    2002-01-01

    Uranium was discovered in the Beaverlodge area of northern Saskatchewan in 1934 with the first major mill beginning operation in 1953. Little attention was paid to tailings quality or tailings management practices. With the onset of the modern uranium operations beginning in the late 1970's, it was repeatedly evident, that the public had significant concerns, particularly with respect to tailings management, that must be addressed if the developments were to be allowed to proceed. Primary considerations related to environmental protection, public safety and an assurance of the ongoing sustainable development of the region. Integrating the decommissioning of a mine/mill site into development planning from the very outset has proven to be a critical component that has contributed to the ongoing success of the Saskatchewan uranium operations. This paper will provide a case study of the evolution of the uranium tailings management technology utilized in Saskatchewan. It documents the evolution of tailings management processes and the characteristics of tailings produced by successive mines in northern Saskatchewan. It also discusses the evolution of technologies applied to management of uranium mill tailings and demonstrates how progressively increasing levels of environmental protection have been achieved during the last 47 years of uranium mill operation. The paper also shows that the planned and progressive decommissioning of an operational site is the key to: Minimizing environmental impacts; Satisfying public and regulatory concerns; Minimizing operational and decommissioning costs; Minimizing corporate liability; and Shifting public resistance to public support. (author)

  2. Decommissioning: A critical component of the design for uranium tailings management facilities

    International Nuclear Information System (INIS)

    Clifton, W.A.; Barsi, R.G.; Misfeldt, G.A.

    2000-01-01

    Uranium was discovered in the Beaverlodge area of northern Saskatchewan in 1934 with the first major mill beginning operation in 1953. Little attention was paid to tailings quality or tailings management practices. With the onset of the modem uranium operations beginning in the late 1970's, it was repeatedly evident, that the public had significant concerns, particularly with respect to tailings management, that must be addressed if the developments were to be allowed to proceed. Primary considerations related to environmental protection, public safety and an assurance of the ongoing sustainable development of the region. Integrating the decommissioning of a mine/mill site into development planning from the very outset has proven to be a critical component that has contributed to the ongoing success of the Saskatchewan uranium operations. This paper will provide a case study of the evolution of the uranium tailings management technology utilized in Saskatchewan. It documents the evolution of tailings management processes and the characteristics of tailings produced by successive mines in northern Saskatchewan. It also discusses the evolution of technologies applied to management of uranium mill tailings and demonstrates how progressively increasing levels of environmental protection have been achieved during the last 47 years of uranium mill operation. The paper also shows that the planned and progressive decommissioning of an operational site is the key to: Minimizing environmental impacts; Satisfying public and regulatory concerns; Minimizing operational and decommissioning costs; Minimizing corporate liability; and Shifting public resistance to public support. (author)

  3. Assessment of environmental radioactivity at uranium mining, processing and tailings management facility at Jaduguda, India.

    Science.gov (United States)

    Tripathi, R M; Sahoo, S K; Jha, V N; Khan, A H; Puranik, V D

    2008-11-01

    The uranium mines at Jaduguda and nearby areas of the Singhbhum thrust belt of Jharkhand State are the only operating mines in India, which supply fuel to nuclear power plants. The gamma radiation dose rates observed at different locations 1m above the tailings surface vary from 0.8 to 3.3 microGy h(-1). The geometric mean activity concentration of (222)Rn in air over the tailings ponds I and II were found to be 30 and 23 Bq m(-3), respectively, but reduces to the local background level at the boundaries of the tailings ponds. The uranium and (226)Ra levels in the ground water sources in the vicinity of the tailings pond are very similar to the regional average of 3.6 microg L(-1) and 23 mBq L(-1), respectively, indicating that there is no ground water migration of radioactive material from the tailings pond. This paper gives a brief account of the environmental radioactivity monitoring during uranium mining, ore processing and waste management operations.

  4. Tailings management at Nabarlek

    International Nuclear Information System (INIS)

    Waggitt, P.

    1989-01-01

    As the entire uranium deposit at Nabarlek was mined in 1979, the mine pit was available as a tailing's repository from the time of commencement of ore processing. In the early years Nabarlek's tailings were deposited subaqueously. In 1985 the tailings deposition method was changed to a sub-aerial, or semi-dry, method. Over the subsequent three years there was evidence that the tailings settled further and squeezed water from lower layers. The water was pumped away and treated for removal of radium before being evaporated in one of the mine's evaporation ponds. When milling was completed in 1988 it was decided to try and increase the rate of water removal and so obtain even greater consolidation of the trailings in a shorter time. This was achieved by loading the tailings with a layer of screened leached sands and waste rock placed on a layer of geotextile filter fabric that had been laid over the whole of the tailings surface in the pit. Once this was completed a modified piling rig was used to insert vertical drains, or wicks, up to 30 metres into the tailings. The drains were placed on a square grid at a spacing of 3.25 metres. Water that was forced out of the tailings by the downward pressure of the sand and rock could flow freely to the surface up these drains. Once at the surface the water was gathered into a sump and pumped away for treatment as before. The drains are working very well at present although it will be some considerable time before the water stops flowing. Already settlement of the tailings is apparent and the settled density of the material is increasing. As far as is known this is the first time that such a system has been employed on mine tailings in a pit in this way

  5. A proactive approach to sustainable management of mine tailings

    Science.gov (United States)

    Edraki, Mansour; Baumgartl, Thomas

    2015-04-01

    The reactive strategies to manage mine tailings i.e. containment of slurries of tailings in tailings storage facilities (TSF's) and remediation of tailings solids or tailings seepage water after the decommissioning of those facilities, can be technically inefficient to eliminate environmental risks (e.g. prevent dispersion of contaminants and catastrophic dam wall failures), pose a long term economic burden for companies, governments and society after mine closure, and often fail to meet community expectations. Most preventive environmental management practices promote proactive integrated approaches to waste management whereby the source of environmental issues are identified to help make a more informed decisions. They often use life cycle assessment to find the "hot spots" of environmental burdens. This kind of approach is often based on generic data and has rarely been used for tailings. Besides, life cycle assessments are less useful for designing operations or simulating changes in the process and consequent environmental outcomes. It is evident that an integrated approach for tailings research linked to better processing options is needed. A literature review revealed that there are only few examples of integrated approaches. The aim of this project is to develop new tailings management models by streamlining orebody characterization, process optimization and rehabilitation. The approach is based on continuous fingerprinting of geochemical processes from orebody to tailings storage facility, and benchmark the success of such proactive initiatives by evidence of no impacts and no future projected impacts on receiving environments. We present an approach for developing such a framework and preliminary results from a case study where combined grinding and flotation models developed using geometallurgical data from the orebody were constructed to predict the properties of tailings produced under various processing scenarios. The modelling scenarios based on the

  6. Integrated management of organic wastes for remediation of massive tailings storage facilities under semiarid mediterranean climate type: efficacy of organic pork residues as study case

    Science.gov (United States)

    Ginocchio, Rosanna; Arellano, Eduardo; España, Helena; Gardeweg, Rosario; Bas, Fernando; Gandarillas, Mónica

    2016-04-01

    Remediation of large surface areas of massive mine wastes, such as tailings storage facilities (TSFs) is challenging, particularly when no topsoils have been stored for the mine closure stage. Worldwide, it has been demonstrated that the use of organic wastes as substrate amendments for remediation of hard rock mine wastes is a useful alternative to topsoils material. In the case of semi-arid climate conditions of north-central Chile, the copper mining industry has generated massive TSF (between 400 ha and 3,000 ha) which needs now to be properly closed according to recently established mine closure regulations. However, in most of the cases, there have been no topsoils savage that facilitate the initial stage of the site remediation. Industrial organic wastes (i.e. biosolids) are found in the area, but their availability is normally below the demand needed for remediation of TSFs and salt content is normally elevated, thus posing salinization risks to the substrate and negative plant growth. We focused on a large organic waste producing industry, the pork industry, whose growth has been restricted due to the limited possibilities for using pig slurries as amendments for croplands in north-central Chile and the strong odor generated, resulting in conflicts with local communities. Incorporation of pig slurries as amendments to post-operative TSFs has been scarcely evaluated at international level (i.e. Spain) and no evaluation at all exists for the solid organic fraction generated from pig slurry treatment plants (PSTP). In the present study, we evaluated the efficacy of both pig slurries (PS) and the solid fraction of PSTP (SF-PSTP) as tailings amendment for creating good plant productivity on TSFs located under semi-arid Mediterranean climate conditions in north-central Chile. A short-term greenhouse study was developed. Copper mine tailings were mixed either with PS (0, 40, 80, and 120 m3 ha-1) or SF-PSTP (0, 25, 50 and 75 t ha-1), distributed in 3 L pots, and

  7. Groundwater Impact Assessment of Tailings Storage Facility, Western Turkey

    Science.gov (United States)

    Peksezer-Sayit, A.; Yazicigil, H.

    2015-12-01

    A tailings storage facility (TSF) is a fundamental part of the mining process and should be carefully designed and managed to prevent any adverse environmental effects. TSF is site-specific and its design criteria are determined by regulations. The new mine waste regulation for the deposition of hazardous waste in a tailings storage facility in Turkey enforces, from bottom to top, 0.5 m thick compacted clay layer with K less than or equal to 1X10-9 m/s , 2 mm thick HDPE geomembrane, and a protective natural material or geotextile. Although these criteria seem to be enough to prevent leakage from the base, in practice, manufacturing and application errors may cause leakage and subsequent contamination of groundwater. The purpose of this study is to assess potential impacts of leakage from the base of TSF on groundwater quality both in operational and post-closure period of a mine site in western Turkey. For this purpose, analytical and 2-D and 3-D numerical models are used together. The potential leakage rate of sulphate-bearing solution from the base of TSF is determined from analytical model. 2-D finite element models (SEEP/W and CTRAN/W) are used to simulate unsaturated flow conditions and advective-dispersive contaminant transport below the TSF under steady-state and transient conditions for the operating period. The long-term impacts of leakage from the base of TSF on groundwater resources are evaluated by 3-D numerical groundwater flow (MODFLOW) and contaminant transport models (MT3DMS). The model results suggest that sulphate-bearing solution leaking from the base of TSF can reach water table in about 290 years. Hence, during the operational period (i.e. 21 years), no interaction is expected between the solution and groundwater. Moreover, long-term simulation results show that about 500 years later, the sulphate concentration in groundwater will be below the maximum allowable limits (i.e. 250 mg/L).

  8. Facility Environmental Management System

    Data.gov (United States)

    Federal Laboratory Consortium — This is the Web site of the Federal Highway Administration's (FHWA's) Turner-Fairbank Highway Research Center (TFHRC) facility Environmental Management System (EMS)....

  9. Environmental management audit, Uranium Mill Tailings Remedial Action Project (UMTRA)

    International Nuclear Information System (INIS)

    1993-01-01

    The Office of Environment, Safety and Health (EH) has established, as part of the internal oversight responsibilities within Department of Energy (DOE), a program within the Office of Environmental Audit (EH-24), to conduct environmental audits at DOE's operating facilities. This document contains the results of the Environmental Management Audit of the Uranium Mill Tailings Remedial Action (UMTRA) Project. This Environmental Management Audit was conducted by the DOE's Office of Environmental Audit from October 26 through November 6, 1992. The audit's objective is to advise the Secretary as to the adequacy of UMTRA's environmental programs, and management organization in ensuring environmental protection and compliance with Federal, state, and DOE environmental requirements. This Environmental Management Audit's scope was comprehensive and covered all areas of environmental management with the exception of environmental programs pertaining to the implementation of the requirements of the National Environmental Policy Act (NEPA), which is the responsibility of the DOE Headquarters Office of NEPA Oversight

  10. Sustainable Facilities Management

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Elle, Morten; Hoffmann, Birgitte

    2004-01-01

    The Danish public housing sector has more than 20 years of experience with sustainable facilities management based on user involvement. The paper outlines this development in a historical perspective and gives an analysis of different approaches to sustainable facilities management. The focus...

  11. Samarbejdsformer og Facilities Management

    DEFF Research Database (Denmark)

    Storgaard, Kresten

    Resultater fra en surveyundersøgelse om fordele og ulemper ved forskellige samarbejdsformer indenfor Facilities Management fremlægges.......Resultater fra en surveyundersøgelse om fordele og ulemper ved forskellige samarbejdsformer indenfor Facilities Management fremlægges....

  12. Sustainable Facilities Management

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Elle, Morten; Hoffmann, Birgitte

    2004-01-01

    The Danish public housing sector has more than 20 years of experience with sustainable facilities management based on user involvement. The paper outlines this development in a historical perspective and gives an analysis of different approaches to sustainable facilities management. The focus...... is on the housing departments and strateies for the management of the use of resources. The research methods used are case studies based on interviews in addition to literature studies. The paper explores lessons to be learned about sustainable facilities management in general, and points to a need for new...

  13. Phytomining for Artisanal Gold Mine Tailings Management

    Directory of Open Access Journals (Sweden)

    Baiq Dewi Krisnayanti

    2016-08-01

    Full Text Available Mine tailings are generally disposed of by artisanal and small scale gold miners in poorly constructed containment areas and this leads to environmental risk. Gold phytomining could be a possible option for tailings management at artisanal and small-scale gold mining (ASGM locations where plants accumulate residual gold in their above ground biomass. The value of metal recovered from plants could offset some of the costs of environmental management. Getting gold into plants has been repeatedly demonstrated by many research groups; however, a simple working technology to get gold out of plants is less well described. A field experiment to assess the relevance of the technology to artisanal miners was conducted in Central Lombok, Indonesia between April and June 2015. Tobacco was planted in cyanidation tailings (1 mg/kg gold and grown for 2.5 months before the entire plot area was irrigated with NaCN to induce metal uptake. Biomass was then harvested (100 kg, air dried, and ashed by miners in equipment currently used to ash activated carbon at the end of a cyanide leach circuit. Borax and silver as a collector metal were added to the tobacco ash and smelted at high temperature to extract metals from the ash. The mass of the final bullion (39 g was greater than the mass of silver used as a collector (31 g, indicating recovery of metals from the biomass through the smelt process. The gold yield of this trial was low (1.2 mg/kg dry weight biomass concentration, indicating that considerable work must still be done to optimise valuable metal recovery by plants at the field scale. However, the described method to process the biomass was technically feasible, and represents a valid technique that artisanal and small-scale gold miners are willing to adopt if the economic case is good.

  14. Tailings management for the twenty-first century

    International Nuclear Information System (INIS)

    Frost, S.E.

    1996-01-01

    The evolution of tailings management at Saskatchewan uranium mines is traced from the fifties to the nineties. Some of the problems with past systems are discussed. The new tailings systems now being proposed for the new operations currently undergoing environmental assessment in Saskatchewan are examined in detail. These new systems represent a change in tailings management philosophy, from keeping tailings high and dry on the surface, to placement of tailings in a low-energy regime within the water table. There they are removed from the active surface environment, avoiding future erosion problems, with a reduced likelihood of suffering intrusion from future human or animal activities. (author). 16 refs., 5 figs

  15. FACILITIES MANAGEMENT AT CERN

    CERN Document Server

    2002-01-01

    Recently we have been confronted with difficulties concerning services which are part of a new contract for facilities management. Please see below for some information about this contract. Following competitive tendering and the Finance Committee decision, the contract was awarded to the Swiss firm 'Facilities Management Network (FMN)'. The owners of FMN are two companies 'M+W Zander' and 'Avireal', both very experienced in this field of facilities management. The contract entered into force on 1st July 2002. CERN has grouped together around 20 different activities into this one contract, which was previously covered by separate contracts. The new contract includes the management and execution of many activities, in particular: Guards and access control; cleaning; operation and maintenance of heating plants, cooling and ventilation equipment for buildings not related to the tunnel or the LHC; plumbing; sanitation; lifts; green areas and roads; waste disposal; and includes a centralised helpdesk for these act...

  16. Life after facilities management.

    Science.gov (United States)

    Singer, C J

    1990-06-01

    Healthcare organizations stand to benefit greatly from facilities management. Nevertheless, there is a glaring lack of interest among organizations to consider this option. Healthcare consultant Charles Singer explores the potential advantages of bringing in a second party to handle part or all of a group's data processing operations.

  17. Risk Management - Variance Minimization or Lower Tail Outcome Elimination

    DEFF Research Database (Denmark)

    Aabo, Tom

    2002-01-01

    on future cash flows (the budget), while risk managers concerned about costly lower tail outcomes will hedge (considerably) less depending on the level of uncertainty. A risk management strategy of lower tail outcome elimination is in line with theoretical recommendations in a corporate value-adding...... perspective. A cross-case study of blue-chip industrial companies partly supports the empirical use of a risk management strategy of lower tail outcome elimination but does not exclude other factors from (co-)driving the observations....

  18. World Class Facilities Management

    DEFF Research Database (Denmark)

    Malmstrøm, Ole Emil; Jensen, Per Anker

    2013-01-01

    Alle der med entusiasme arbejder med Facilities Management drømmer om at levere World Class. DFM drømmer om at skabe rammer og baggrund for, at vi i Danmark kan bryste os at være blandt de førende på verdensplan. Her samles op på, hvor tæt vi er på at nå drømmemålet.......Alle der med entusiasme arbejder med Facilities Management drømmer om at levere World Class. DFM drømmer om at skabe rammer og baggrund for, at vi i Danmark kan bryste os at være blandt de førende på verdensplan. Her samles op på, hvor tæt vi er på at nå drømmemålet....

  19. Cryogenic Fluid Management Facility

    Science.gov (United States)

    Eberhardt, R. N.; Bailey, W. J.

    1985-01-01

    The Cryogenic Fluid Management Facility is a reusable test bed which is designed to be carried within the Shuttle cargo bay to investigate the systems and technologies associated with the efficient management of cryogens in space. Cryogenic fluid management consists of the systems and technologies for: (1) liquid storage and supply, including capillary acquisition/expulsion systems which provide single-phase liquid to the user system, (2) both passive and active thermal control systems, and (3) fluid transfer/resupply systems, including transfer lines and receiver tanks. The facility contains a storage and supply tank, a transfer line and a receiver tank, configured to provide low-g verification of fluid and thermal models of cryogenic storage and transfer processes. The facility will provide design data and criteria for future subcritical cryogenic storage and transfer system applications, such as Space Station life support, attitude control, power and fuel depot supply, resupply tankers, external tank (ET) propellant scavenging, and ground-based and space-based orbit transfer vehicles (OTV).

  20. New Ideas on Facilities Management.

    Science.gov (United States)

    Grimm, James C.

    1986-01-01

    Examines trends in facilities management relating to products and people. Reviews new trends in products, including processes, techniques, and programs that are being expounded by business and industry. Discusses the "people factors" involved in facilities management. (ABB)

  1. Current practices for the management and confinement of uranium mill tailings

    International Nuclear Information System (INIS)

    1992-01-01

    This report discusses the current practices used in the design siting, construction and closeout of impoundment facilities for uranium mill tailings. The objective is to present an integrated overview of the technological, safety and radiation protection aspects of these topics in order to ensure that the potential radiological and non-radiological risks associated with the management of uranium mill tailings are minimized now and in the future. The report: identifies the nature and source of radioactive and non-radioactive pollutants in uranium mill tailings; identifies the important mechanisms by which pollutants can be released from the tailings impoundment; reviews radiation protection aspects of these mechanisms; describes the pathways by which the pollutants may reach humans; describes some of the site selection and design options and considerations for final stabilization and rehabilitation of tailings impoundments; describes the methods of assessing closure strategies; describes long term responsibilities for tailings management and financial assurance to ensure these responsibilities; and reviews the magnitude and probability of occurrence of the hazards arising, with the aim of ensuring that the risks presented are acceptable. Because of the complexity of the pollutant release mechanisms and the site specific nature of the design and management controls that can be used, it is not possible for a report of this nature to be either exhaustive or detailed in all respects. The methods of confinement employed for any particular tailings impoundment will depend on the country, its climate, demography and its site specific performance criteria which should be defined by the relevant competent authorities. Both operating and post-operating conditions are considered. After shutdown of the mill and stabilization of the tailings, continuing surveillance and maintenance should be considered until the integrity and durability of the tailings impoundment have been

  2. Capital Ideas for Facilities Management.

    Science.gov (United States)

    Golding, Stephen T.; Gordon, Janet; Gravina, Arthur

    2001-01-01

    Asserting that just like chief financial officers, higher education facilities specialists must maximize the long-term performance of assets under their care, describes strategies for strategic facilities management. Discusses three main approaches to facilities management (insourcing, cosourcing, and outsourcing) and where boards of trustees fit…

  3. Development of a methodology to accelerate a spontaneous grass colonization in a tailings storage facility under semiarid mediterranean climate type

    Science.gov (United States)

    Ginocchio, Rosanna; Arellano, Eduardo; Morales-Ladron de Guevara, Arturo

    2016-04-01

    Phytostabilization of massive mine tailings (>400 he) under semiarid environments is challenging, particularly when no organic amendments are locally available and no irrigation is possible. Increasing tendency for reprocessing old tailings to recover valued metals further pioneer the need for simple but effective plant covers. The choice of plant species and form of management are thus very important. CODELCO-Chile chose the Cauquenes post-operational tailings storage facility (TFS; 700 ha), that will be reprocessed for copper and other elements in the near future, to evaluate efficacy of the phytostabilization technology under semiarid conditions in central Chile. Surface application of a polymer (Soiltac TM) has been used for wind control of tailings but phytostabilization is considered as a best cost-effective alternative. A field study was performed to define a management program to improve the establishment and cover of an annual native grass (Vulpia myuros var. megalura), a spontaneous colonizer of the TSF. Considered management factors were control of macro herbivores (with and without fence), macronutrient improvement (with and without application of N-rich foliar fertilizer), and improvement of seed retention in the substrate (with and without small-scale rugosity; with and without lived wind-breakers; with and without mechanical wind-breakers). Each treatment was replicated three times and established in 2 m x 2 m quadrats. Plant response variables were monitored after 1 and 2 grass growing seasons. Application of N-rich foliar fertilizer and any wind control mechanism for seed retention in the substrate were effective for significantly improving both grass cover and biomass production in time, irrespective of macro-herbivore control. Seed production was significantly improved when macro herbivores were excluded and was positively and significantly correlated to vegetative biomass production. When applying this management program for tailings

  4. Proceedings of the 15. annual British Columbia MEND ML/ARD workshop : the management of tailings and tailings impoundments

    International Nuclear Information System (INIS)

    2009-02-01

    This Mine Environment Neutral Drainage (MEND) workshop was held to promote the exchange of information and ideas on environmental protection and reclamation associated with mining. The workshop covered a broad spectrum of reclamation issues and the key environmental challenges facing the mining industry, such as acid mine drainage (AMD) control, and metal leaching and acid rock drainage (ML/ARD). The theme for the 2008 workshop was the management of tailings and tailings impoundments. Topics of discussion included hydrogeology and geochemistry; tailings disposal; mitigation; closure plans; and postclosure performance. The emphasis was on full-scale case studies, practical constraints and sustaining successful disposal strategies and remediation. The session on tailings management reviewed overarching policies and practices; methods of subaerial tailings disposal and case studies of tailings management; and detailed investigations of geochemical properties and processes. The conference featured 22 presentations, of which 4 have been catalogued separately for inclusion in this database. refs., tabs., figs

  5. Factors influencing the risk of wildlife cyanide poisoning on a tailings storage facility in the Eastern Goldfields of Western Australia.

    Science.gov (United States)

    Griffiths, Stephen R; Smith, Gregory B; Donato, David B; Gillespie, Craig G

    2009-07-01

    Patterns of wildlife visitation and interaction with cyanide-bearing tailings slurry and solutions at the Fimiston tailings storage facility (TSF) have been reported in a previously published ecological study. The above-mentioned findings are extended in this paper by the examination of additional wildlife survey data, along with process water chemistry data collected during the same study period. Analysis of the combined results revealed that the primary wildlife protective mechanism in operation was effective management of tailings cyanide concentration. Nevertheless, tailings discharge concentration exceeded the industry standard wildlife protective limit of 50mg/L weak acid dissociable (WAD) cyanide episodically during the study period. Wildlife that interacted with habitats close to the spigot outlet during brief periods of increased discharge concentration were likely to have been exposed to bioavailable cyanide at concentrations greater than the industry standard protective limit. However, no wildlife deaths were recorded. These results appear to support the hypothesis that hypersalinity of process solutions (unique to the Kalgoorlie district of Western Australia) and a lack of aquatic food resources represent secondary protective mechanisms that operated to prevent cyanide-related wildlife mortality during the project. The proposed protective mechanisms are discussed in the context of their potential application as proactive management procedures to minimise wildlife exposure to cyanide.

  6. A Program Management Framework for Facilities Managers

    Science.gov (United States)

    King, Dan

    2012-01-01

    The challenge faced by senior facility leaders is not how to execute a single project, but rather, how to successfully execute a large program consisting of hundreds of projects. Senior facilities officers at universities, school districts, hospitals, airports, and other organizations with extensive facility inventories, typically manage project…

  7. 48 CFR 970.3770 - Facilities management.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Facilities management. 970... REGULATIONS DOE MANAGEMENT AND OPERATING CONTRACTS Facilities Management Contracting 970.3770 Facilities management. ...

  8. CLAIMS OF SUSTAINABLE FACILITIES MANAGEMENT

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev

    -creating of new socio-technical services and technologies These SFM understandings are concluded to be coexisting claims of SFM definitions. Practical Implications: Facilities managers will be able to identify the mindset behind different services and technologies that are promoted as SFM. But maybe just......Purpose: The purpose of the paper is to provide an overview of current practices within the emergent management discipline: Sustainable Facilities Management (SFM). Background: To develop a sustainable society, facilities managers must become change agents for sustainability in the built...... environment. Facilities Management (FM) is contributing to the environmental, social and economical problems, but can at the same time also be a part of the solution. However, to integrate sustainability in FM is still an emergent niche within FM, and the examples of SFM so far seems to come out of very...

  9. Technical Merits and Leadership in Facility Management

    National Research Council Canada - National Science Library

    Shoemaker, Jerry

    1997-01-01

    .... The document is divided into six chapters; the introduction, facility management and leadership, building systems, facility operations, facility maintenance strategies, and the conclusion and final analysis...

  10. Knowledge Map of Facilities Management

    DEFF Research Database (Denmark)

    Nenonen, Suvi; Jensen, Per Anker; Lindahl, Göran

    2014-01-01

    in creating an inventory of knowledge (i.e. the knowledge base) and developing/improving the processes of knowledge sharing in research, education and practice. Theory Knowledge mapping is discussed in terms of knowledge management. The research is connected to knowledge mapping in the facilities management......Purpose This paper aims to draft a knowledge map of the fragmented and multidisciplinary research of and relevant to FM. Facilities management knowledge map is a tool for presenting what relevant data and knowledge, a.k.a. knowledge, resides in different disciplines. Knowledge mapping is a step...... profession, research and education. The knowledge map aims to contrast perspectives on how to map interdisciplinary research. Design/methodology/approach The Knowledge map is based on classification of 83 articles, including volume 2013 of Facilities (40 articles) and of Journal of Facilities Management (21...

  11. Wirtschaftlichkeit von Facilities Management, Rechnet sich Facilities Management?

    Directory of Open Access Journals (Sweden)

    Redlein, Alexander

    2018-01-01

    Full Text Available Durch zunehmenden Wettbewerb und damit einhergehendem Kostendruck sowie einem sich rasch ändernden Arbeitsumfeld im Allgemeinen, und im Facility Management im Speziellen, ergibt sich die Notwendigkeit nach neuen Wegen für Synergien und Kosteneinsparungen zu suchen. Darüber hinaus nehmen sowohl der Komplexitätsgrad der Facilities aber auch die Gesetzlichen- und die Kundenanforderungen zu. Derzeit ist die Nutzung von Synergien zwischen den einzelnen Facility Services sehr gering. Eine Möglichkeit, um oben angeführte Anforderungen zu erfüllen, ist der „Integrated Facility Services“ (IFS Ansatz. Dieser, auf Business Process Reengineering und Value Engineering basierende Ansatz, setzt sich aus zwei Schritten zusammen: 1. Optimierung der internen (ManagementProzesse (Facility Management 2. Optimierung der operativen Leistungserbringung (Facility Services Im zweiten Schritt werden mit methodischen Ansätzen die möglichen Synergien zwischen den einzelnen Servicesilos wie haustechnische Dienstleistungen, Security, Catering, Reinigung etc. untersucht. Durch die Nutzung der Synergien ergibt sich ein verbessertes Verhältnis von Kosten zu Output.

  12. COGEMA's UMF [Uranium Management Facility

    International Nuclear Information System (INIS)

    Lamorlette, G.; Bertrand, J.P.

    1988-01-01

    The French government-owned corporation, COGEMA, is responsible for the nuclear fuel cycle. This paper describes the activities at COGEMA's Pierrelatte facility, especially its Uranium Management Facility. UF6 handling and storage is described for natural, enriched, depleted, and reprocessed uranium. UF6 quality control specifications, sampling, and analysis (halocarbon and volatile fluorides, isotopic analysis, uranium assay, and impurities) are described. In addition, the paper discusses the filling and cleaning of containers and security at UMF

  13. Utilizing Interns in Facilities Management

    Science.gov (United States)

    Judkins, Clarissa; Morris, John P.; Molocznik, Chuck

    2011-01-01

    Facilities management is rapidly changing and developing from a position an individual stumbles into--or work one's way up through--to a discipline and vocation all of its own. There is a need for a collaborative strategy among leaders in practice, education, and research to share knowledge and experience and to establish professional and ethical…

  14. UMTRA [Uranium Mill Tailings Remedial Action] Project site management manual

    International Nuclear Information System (INIS)

    1990-10-01

    The purpose of this manual is to summarize the organizational interfaces and the technical approach used to manage the planning, design development, National Environmental Policy Act (NEPA) compliance, engineering, and remedial action required to stabilize and control the designated Uranium Mill Tailings Remedial Action (UMTRA) Project sites. This manual describes the Project's objective, participants' roles and responsibilities, technical approach for accomplishing the objective, and planning and managerial controls to be used in performing the site work. The narrative follows the flow of activities depicted in Figure 1.1, which provides the typical sequence of key Project activities. A list of acronyms used is presented at the end of the manual. The comparable manual for UMTRA Project vicinity properties is the ''Vicinity Properties Management and Implementation Manual'' (VPMIM) (UMTRA-DOE/AL-050601). Together, the two manuals cover the remedial action activities associated with UMTRA Project sites. The UMTRA Project's objective is to stabilize and control the uranium mill tailings, vicinity property materials, and other residual radioactive materials at the designated sites (Figure 1.2) in a safe and environmentally sound manner in order to minimize radiation health hazards to the public. 26 figs., 6 tabs

  15. Facility Management's Role in Organizational Sustainability

    Science.gov (United States)

    Adams, Gregory K.

    2013-01-01

    Facility managers have questions about sustainability. How do an organization's physical facilities--its built environment--and the management of them, influence the sustainability of the organization or institution as a whole? How important is Facility Management (FM) to the overall sustainability profile of an organization? Facility managers…

  16. DKIST facility management system integration

    Science.gov (United States)

    White, Charles R.; Phelps, LeEllen

    2016-07-01

    The Daniel K. Inouye Solar Telescope (DKIST) Observatory is under construction at Haleakalā, Maui, Hawai'i. When complete, the DKIST will be the largest solar telescope in the world. The Facility Management System (FMS) is a subsystem of the high-level Facility Control System (FCS) and directly controls the Facility Thermal System (FTS). The FMS receives operational mode information from the FCS while making process data available to the FCS and includes hardware and software to integrate and control all aspects of the FTS including the Carousel Cooling System, the Telescope Chamber Environmental Control Systems, and the Temperature Monitoring System. In addition it will integrate the Power Energy Management System and several service systems such as heating, ventilation, and air conditioning (HVAC), the Domestic Water Distribution System, and the Vacuum System. All of these subsystems must operate in coordination to provide the best possible observing conditions and overall building management. Further, the FMS must actively react to varying weather conditions and observational requirements. The physical impact of the facility must not interfere with neighboring installations while operating in a very environmentally and culturally sensitive area. The FMS system will be comprised of five Programmable Automation Controllers (PACs). We present a pre-build overview of the functional plan to integrate all of the FMS subsystems.

  17. Strategic Management Plan for Columbian Sharp-Tailed Grouse 2002

    OpenAIRE

    State of Utah, Department of Natural Resoures, Division of Wildlife Resources

    2002-01-01

    The Columbian Sharp-tailed Grouse (Tympanuchus phasianellus columbianus) is one of seven subspecies of Sharp-tailed Grouse. Historically, Columbian Sharp-tailed Grouse occurred within sagebrush-native bunch grass habitat throughout the intermountain region, extending from British Columbia, Washington, Idaho and Montana south through portions of Oregon, California, Nevada, Utah, Wyoming, Colorado and New Mexico. Sharp-tailed Grouse populations range-wide began declining during 1880-1920 (Bart ...

  18. Design Integration of Facilities Management

    DEFF Research Database (Denmark)

    Jensen, Per Anker

    2009-01-01

    One of the problems in the building industry is a limited degree of learning from experiences of use and operation of existing buildings. Development of professional facilities management (FM) can be seen as the missing link to bridge the gap between building operation and building design....... Strategies, methods and barriers for the transfer and integration of operational knowledge into the design process are discussed. Multiple strategies are needed to improve the integration of FM in design. Building clients must take on a leading role in defining and setting up requirements and procedures....... Involvement of professional facilities managers in the design process is an obvious strategy, but increased competences are needed among building clients, designers and the operational staff. More codification of operational knowledge is also needed, for instance in IT systems. The paper is based...

  19. An Evaluation Model for Tailings Storage Facilities Using Improved Neural Networks and Fuzzy Mathematics

    Directory of Open Access Journals (Sweden)

    Sen Tian

    2014-01-01

    Full Text Available With the development of mine industry, tailings storage facility (TSF, as the important facility of mining, has attracted increasing attention for its safety problems. However, the problems of low accuracy and slow operation rate often occur in current TSF safety evaluation models. This paper establishes a reasonable TSF safety evaluation index system and puts forward a new TSF safety evaluation model by combining the theories for the analytic hierarchy process (AHP and improved back-propagation (BP neural network algorithm. The varying proportions of cross validation were calculated, demonstrating that this method has better evaluation performance with higher learning efficiency and faster convergence speed and avoids the oscillation in the training process in traditional BP neural network method and other primary neural network methods. The entire analysis shows the combination of the two methods increases the accuracy and reliability of the safety evaluation, and it can be well applied in the TSF safety evaluation.

  20. Computer-Aided Facilities Management Systems (CAFM).

    Science.gov (United States)

    Cyros, Kreon L.

    Computer-aided facilities management (CAFM) refers to a collection of software used with increasing frequency by facilities managers. The six major CAFM components are discussed with respect to their usefulness and popularity in facilities management applications: (1) computer-aided design; (2) computer-aided engineering; (3) decision support…

  1. The mixed waste management facility

    International Nuclear Information System (INIS)

    Streit, R.D.

    1995-10-01

    During FY96, the Mixed Waste Management Facility (MWMF) Project has the following major objectives: (1) Complete Project Preliminary Design Review (PDR). (2) Complete final design (Title II) of MWMF major systems. (3) Coordinate all final interfaces with the Decontamination and Waste Treatment Facility (DWTF) for facility utilities and facility integration. (4) Begin long-lead procurements. (5) Issue Project Baseline Revision 2-Preliminary Design (PB2), modifying previous baselines per DOE-requested budget profiles and cost reduction. Delete Mediated Electrochemical Oxidation (MEO) as a treatment process for initial demonstration. (6) Complete submittal of, and ongoing support for, applications for air permit. (7) Begin detailed planning for start-up, activation, and operational interfaces with the Laboratory's Hazardous Waste Management Division (HWM). In achieving these objectives during FY96, the Project will incorporate and implement recent DOE directives to maximize the cost savings associated with the DWTF/MWMF integration (initiated in PB1.2); to reduce FY96 new Budget Authority to ∼$10M (reduced from FY97 Validation of $15.3M); and to keep Project fiscal year funding requirements largely uniform at ∼$10M/yr. A revised Project Baseline (i.e., PB2), to be issued during the second quarter of FY96, will address the implementation and impact of this guidance from an overall Project viewpoint. For FY96, the impact of this guidance is that completion of final design has been delayed relative to previous baselines (resulting from the delay in the completion of preliminary design); ramp-up in staffing has been essentially eliminated; and procurements have been balanced through the Project to help balance budget needs to funding availability

  2. Application of a life cycle assessment to compare environmental performance in coal mine tailings management.

    Science.gov (United States)

    Adiansyah, Joni Safaat; Haque, Nawshad; Rosano, Michele; Biswas, Wahidul

    2017-09-01

    This study compares coal mine tailings management strategies using life cycle assessment (LCA) and land-use area metrics methods. Hybrid methods (the Australian indicator set and the ReCiPe method) were used to assess the environmental impacts of tailings management strategies. Several strategies were considered: belt filter press (OPT 1), tailings paste (OPT 2), thickened tailings (OPT 3), and variations of OPT 1 using combinations of technology improvement and renewable energy sources (OPT 1A-D). Electrical energy was found to contribute more than 90% of the environmental impacts. The magnitude of land-use impacts associated with OPT 3 (thickened tailings) were 2.3 and 1.55 times higher than OPT 1 (tailings cake) and OPT 2 (tailings paste) respectively, while OPT 1B (tailings belt filter press with technology improvement and solar energy) and 1D (tailings belt press filter with technology improvement and wind energy) had the lowest ratio of environmental impact to land-use. Further analysis of an economic cost model and reuse opportunities is required to aid decision making on sustainable tailings management and industrial symbiosis. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Facilities Management and Added Value

    DEFF Research Database (Denmark)

    Jensen, Per Anker

    2010-01-01

    Aim: This paper aims to present different models of the concept of the added value of Facilities Management (FM), including the FM Value Map, which forms the basis of research group in EuroFM, and to present some of the results of this research collaboration. Approach and methodology: The paper...... is based on literature reviews of the most influential journals within the academic fields of FM, Corporate Real Estate Management and Business to Business Marketing and discussions between participants of the research group working on a further exploration and testing of the FM Value Map. Conclusions......: The research shows a number of different definitions and focus points of Added Value of FM, dependent on the academic field and the area of application. The different research perspectives explored a holistic view on the added value of FM by the integration of an external market based view (with a focus...

  4. The Facilities Management Value Map

    DEFF Research Database (Denmark)

    Jensen, Per Anker

    2008-01-01

    The paper is based on research from 21 cases studies on Facilities Management (FM) in the Nordic countries. The work also relates to a working group on “Highlighting the Added Value of FM” under Nordic FM. The aim has been to establish a conceptual framework to discuss, understand and explain the...... and the main stakeholder that benefits from the added value of FM. The framework will be presented together with an illustrative example from practice of how FM can create added value.......The paper is based on research from 21 cases studies on Facilities Management (FM) in the Nordic countries. The work also relates to a working group on “Highlighting the Added Value of FM” under Nordic FM. The aim has been to establish a conceptual framework to discuss, understand and explain...... the ways FM can create added value. The method has found inspiration in the strategic mapping from balanced score card methodology. The result is identification of the main resources, processes and products/deliveries in FM, the principal ways FM creates impacts on the core business as well as society...

  5. New Trends in Facility Asset Management.

    Science.gov (United States)

    Adams, Matt

    2000-01-01

    Explains new, positive trends in facility asset management that encompasses greater acceptance and involvement of facility managers in the financial planning process, greater awareness of the need for maintenance, and facility administrators taking a greater role with business officers. The new climate for alternative renewal financing proposals…

  6. Facilities Management Guide for Asbestos and Lead

    Science.gov (United States)

    2004-11-01

    FACILITIES MANAGEMENT GUIDE FOR ASBESTOS AND LEAD 6. AUTHOR(S) 5d. PROJECT NUMBER 5e...and abatement of hazards The pertinent facilities management aspects of the asbestos program are: • Actively manage undamaged ACM in place, and...En su re tr ai ni ng in cl ud es th e to pi cs o ut lin ed in th e re gu la tio n FACILITIES MANAGEMENT Pa in t w ith L ea d, O SH

  7. Managing white-tailed deer: eastern North America

    Science.gov (United States)

    Robinson, Kelly F.; Diefenbach, Duane R.; Fuller, Angela K.; Hurst, Jeremy E.; Rosenberry, Christopher S.

    2014-01-01

    Many studies have documented that coyotes (Canis latrans) are the greatest source of natural mortality for white-tailed deer (Odocoileus virginianus) neonates (<3 months old). With the range expansion of coyotes eastward in North America, many stakeholders are concerned that coyote predation may be affecting deer populations adversely. We hypothesized that declines in neonate survival, perhaps caused by increasing coyote predation, could be offset by adjusting or eliminating antlerless harvest allocations. We used a stochastic, age-based population simulation model to evaluate combinations of low neonate survival rates, severe winters, and low adult deer survival rates to determine the effectiveness of reduced antlerless harvest at stabilizing deer populations. We found that even in regions with high winter mortality, reduced antlerless harvest rates could stabilize deer populations with recruitment and survival rates reported in the literature. When neonate survival rates were low (25%) and yearling and adult female survival rates were reduced by 10%, elimination of antlerless harvests failed to stabilize populations. Our results suggest increased deer mortality from coyotes can be addressed through reduced hunting harvest of adult female deer in most circumstances throughout eastern North America. However, specific knowledge of adult female survival rates is important for making management decisions in areas where both neonate and adult survival may be affected by predation and other mortality factors.

  8. Technical Merits and Leadership in Facility Management

    National Research Council Canada - National Science Library

    Shoemaker, Jerry

    1997-01-01

    After almost ten years of experience and formal education in design, construction, and facility operations and maintenance, the challenges and complexity of facility management still seem overwhelming and intangible...

  9. OPG Western Waste Management Facility

    International Nuclear Information System (INIS)

    Julian, J.

    2011-01-01

    The Ontario Power Generation (OPG) Western Waste Management Facility (WWMF) uses a computer based Supervisory Control and Data Acquisition (SCADA) system to monitor its facility, and control essential equipment. In 2007 the WWMF Low and Intermediate Level Waste (L&ILW) technical support section conducted a review of outstanding corrective maintenance work. Technical support divided all work on a system by system basis. One system under review was the Waste Volume Reduction Building (WVRB) control room SCADA system. Technical support worked with control maintenance staff to assess all outstanding work orders on the SCADA system. The assessment identified several deficiencies in the SCADA system. Technical support developed a corrective action plan for the SCADA system deficiencies, and in February of 2008 developed an engineering change package to correct the observed deficiencies. OPG Nuclear Waste Engineering approved the change package and the WVRB Control Room Upgrades construction project started in January of 2009. The WVRB control room upgrades construction work was completed in February of 2009. This paper provides the following information regarding the WWMF SCADA system and the 2009 WVRB Control Room Upgrades Project: A high-level explanation of SCADA system technology, and the various SCADA system components installed in the WVRB; A description of the state of the WVRB SCADA system during the work order assessment, identifying all deficiencies; A description of the new design package; A description of the construction project; and, A list of lessons learned during construction and commissioning, and a path forward for future upgrades. (author)

  10. Mitigating risks related to facilities management.

    Science.gov (United States)

    O'Neill, Daniel P; Scarborough, Sydney

    2013-07-01

    By looking at metrics focusing on the functionality, age, capital investment, transparency, and sustainability (FACTS) of their organizations' facilities, facilities management teams can build potential business cases to justify upgrading the facilities. A FACTS analysis can ensure that capital spent on facilities will produce a higher or more certain ROI than alternatives. A consistent process for managing spending helps to avoid unexpected spikes that cost the enterprise more in the long run.

  11. Waste management considerations in nuclear facility decommissioning

    International Nuclear Information System (INIS)

    Elder, H.K.; Murphy, E.S.

    1981-01-01

    Decommissioning of nuclear facilities involves the management of significant quantities of radioactive waste. This paper summarizes information on volumes of waste requiring disposal and waste management costs developed in a series of decommissioning studies performed for the U.S. Nuclear Regulatory Commission by the Pacific Northwest Laboratory. These studies indicate that waste management is an important cost factor in the decommissioning of nuclear facilities. Alternatives for managing decommissioning wastes are defined and recommendations are made for improvements in waste management practices

  12. Characterization of the geochemical processes present in the radionuclides and metals mobilization in the tailing dam at the Uranium Mining and Milling Facilities - Pocos de Caldas, MG, Brazil

    International Nuclear Information System (INIS)

    Pinto, Patricia Freitas

    1995-08-01

    In Brazil, the first step of nuclear fuel cycle - the mining and milling of the uranium ore - is developed at the Uranium Mining and Milling Facilities of Pocos de Caldas, Minas Gerais state. The wastes management is a very important aspect of the process. The understanding of the geochemical processes that occur in the tailings dam is a key question to define a plan of action concerning the decommissioning strategy of the facility. The objective of the present work was to give some issues to help in the adoption of the remedial actions concerning the decommissioning of the facility. It focused on the characterization of the most important geochemical processes regulating the mobilization of radionuclides and heavy metals in the tailings dam. Two cores from the tailings dam (uncovered area) were collected. Seepage and drainage waters were sampled, the same being true for the tailings dam lake. Groundwater form an aquifer bellow the tailings dam and superficial waters from a river that receives the effluents of the dam (Soberbo River) were also sampled. Data from the mining company were used to calculate the inventory of radionuclides and heavy metals deposited in the waste dam.The obtained results showed that pyrite oxidation is the key process in the mobilization of radionuclides and heavy metals from the wastes. Pyrite oxidation is a process regulated by oxygen diffusion and water. In the studied scenario it could be shown that the process was limited to a one meter deep layer in the uncovered part of the waste dam. Because of this, Fe, Al, Mn, Zn, Th and 238 U showed higher concentrations in the bottom layers of the cores in relation to the upper ones. 226 Ra and 210 Pb showed opposite patterns. The coprecipitation with Ca SO 4 was the most relevant mechanism in both radionuclides immobilization in the wastes. Sulfate was the only chemical species that could be assigned as a contaminant in aquifer bellow the waste dam. As a conclusion, the target environmental

  13. Scientific basis for risk assessment and management of uranium mill tailings

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    A National Research Council study panel, convened by the Board on Radioactive Waste Management, has examined the scientific basis for risk assessment and management of uranium mill tailings and issued this final report containing a number of recommendations. Chapter 1 provides a brief introduction to the problem. Chapter 2 examines the processes of uranium extraction and the mechanisms by which radionuclides and toxic chemicals contained in the ore can enter the environment. Chapter 3 is devoted to a review of the evidence on health risks associated with radon and its decay products. Chapter 4 provides a consideration of conventional and possible new technical alternatives for tailings management. Chapter 5 explores a number of issues of comparative risk, provides a brief history of uranium mill tailings regulation, and concludes with a discussion of choices that must be made in mill tailing risk management. 211 refs., 30 figs., 27 tabs.

  14. Scientific basis for risk assessment and management of uranium mill tailings

    International Nuclear Information System (INIS)

    1986-01-01

    A National Research Council study panel, convened by the Board on Radioactive Waste Management, has examined the scientific basis for risk assessment and management of uranium mill tailings and issued this final report containing a number of recommendations. Chapter 1 provides a brief introduction to the problem. Chapter 2 examines the processes of uranium extraction and the mechanisms by which radionuclides and toxic chemicals contained in the ore can enter the environment. Chapter 3 is devoted to a review of the evidence on health risks associated with radon and its decay products. Chapter 4 provides a consideration of conventional and possible new technical alternatives for tailings management. Chapter 5 explores a number of issues of comparative risk, provides a brief history of uranium mill tailings regulation, and concludes with a discussion of choices that must be made in mill tailing risk management. 211 refs., 30 figs., 27 tabs

  15. Integrated Facilities Management and Fixed Asset Accounting.

    Science.gov (United States)

    Golz, W. C., Jr.

    1984-01-01

    A record of a school district's assets--land, buildings, machinery, and equipment--can be a useful management tool that meets accounting requirements and provides appropriate information for budgeting, forecasting, and facilities management. (MLF)

  16. Uranium Mill Tailings Remedial Action Project, Surface Project Management Plan. Revision 1

    International Nuclear Information System (INIS)

    1994-12-01

    Title I of the Uranium Mill Tailings Radiation Control Act (UMTRCA) authorizes the US Department of Energy (DOE) to undertake remedial action at 24 designated inactive uranium processing sites and associated vicinity properties (VP) containing uranium mill tailings and related residual radioactive materials. The purpose of the Uranium Mill Tailings Remedial Action (UMTRA) Surface Project is to minimize or eliminate radiation health hazards to the public and the environment at the 24 sites and related VPs. This document describes the management organization, system, and methods used to manage the design, construction, and other activities required to clean up the designated sites and associated VPs, in accordance with the UMTRCA

  17. Contingency planning and risk analysis for water and tailings management at Ranger Uranium Mines

    International Nuclear Information System (INIS)

    McNally, P.E.

    1986-01-01

    This paper describes some of the more likely risks and contingency procedures associated with the extremely variable monsoonal climate of the Alligator Rivers region in the Northern Territory in relation to the Ranger Uranium Mine. The tailings management system is basically a large storage impoundment and a reticulation system that delivers tailings sludge and recycles supernatant water. It is a closed circuit within the water management system and is dealt with as an integral part of that system

  18. Does PDC Belong in Facilities Management?

    Science.gov (United States)

    Dessoff, Alan

    2012-01-01

    Whether planning, design, and construction (PDC) of buildings should be part of facilities management, with its traditional operations and maintenance functions, or separated from it, has been a divisive question on many campuses for a long time. Now, although it is not happening everywhere, facilities managers at a number of institutions, public…

  19. Evolution of Computer-Aided Facility Management.

    Science.gov (United States)

    McLean, William D.

    1998-01-01

    Presents the benefits facilities managers could realize by converting blueprints, CADD information, and as-built drawings into a computer-aided facility management (CAFM) system. CAFM links graphics to databases, adding information on types of spaces, occupants, materials, equipment, costs, and other building systems. This helps facilities…

  20. Geotechnical quality control: low-level radioactive waste and uranium mill tailings disposable facilities

    International Nuclear Information System (INIS)

    Johnson, H.V.; Spigolon, S.J.; Lutton, R.J.

    1983-06-01

    Among the many responsibilities, the owner or licensee establishes and oversees the quality control (QC) of geotechnical aspects during construction, operation, and closure of low-level radioactive waste (LLW) or uranium mill tailings disposal facilities. This report first focuses on geotechnical QC practices by identifying the geotechnical parameters that should be considered along with appropriate laboratory and field testing and observation techniques. Advantages and disadvantages of the tests are discussed. Preference is given to those standard testing techniques (e.g., ASTM and AASHTO) that are in widespread use and easily accessible to industry. Next, guidance is provided on establishing a geotechnical QC program. The frequency of testing is discussed along with specifications for appropriate field and observation control. Methods of relating laboratory testing and field testing are recommended. Various factors influencing QC and reports/documentation control are discussed. Finally, verification studies for confirming site characteristics and soil engineering properties related to design assumptions are explained. It is the intent of this report to provide a document that summarizes all elements necessary to properly implement a QC plan. To this end and since NRC's involvement will only be through its random inspection and enforcement function and is expected to be limited during the licensee's execution of the QC program (after licensing), emphasis is placed throughout this report on the need for proper QC documentation

  1. A study of facilities relative to stabilization of uranium mill tailings at Elliot Lake

    International Nuclear Information System (INIS)

    1983-06-01

    The total project capital cost of facilities to stabilize uranium mill tailings at Elliot Lake while producing 350,000 short tons per year of sulphuric acid and 266,000 short tons per year of triple superphosphate is approximately 153 million dollars. This includes pyrite flotation, roasting, acid and phosphate production, site preparation, utilities and project overhead. A new operating credit of 20.43 dollars per short ton of acid is estimated, achieved from the sale of steam and fertilizer. Two alternatives to the above were also examined, as follows: a) Production of 596,000 short tons per year of acid, and the sale of 246,000 short tons which are in excess of the Elliot Lake mill's requirement. The capital cost of this scheme is approximately 89 million dollars, with a net operating credit of 14.97 dollars per short ton of acid. b) Production of only 350,000 short tons per year of acid. This would entail disposal of the excess pyrite floated from the Rio Algom mills. The capital cost of this scheme is approximately 75 million dollars, with an operating cost of 10.47 dollars per short ton of acid

  2. Landfill gas management facilities design guidelines

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-03-15

    In British Columbia, municipal solid waste landfills generate over 1000 tonnes of methane per year; landfill gas management facilities are required to improve the environmental performance of solid waste landfills. The aim of this document, developed by the British Columbia Ministry of the Environment, is to provide guidance for the design, installation, and operation of landfill gas management facilities to address odor and pollutant emissions issues and also address health and safety issues. A review of technical experience and best practices in landfill gas management facilities was carried out, as was as a review of existing regulations related to landfill gas management all over the world. This paper provides useful information to landfill owners, operators, and other professionals for the design of landfill gas management facilities which meet the requirements of landfill gas management regulations.

  3. Uranium mill tailings remedial action project real estate management plan

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    This plan summarizes the real estate requirements of the US Department of Energy`s (DOE) Uranium Mill Tailings Action (UMTRA) Project, identifies the roles and responsibilities of project participants involved in real estate activities, and describes the approaches used for completing these requirements. This document is intended to serve as a practical guide for all project participants. It is intended to be consistent with all formal agreements, but if a conflict is identified, the formal agreements will take precedence.

  4. Uranium mill tailings remedial action project real estate management plan

    International Nuclear Information System (INIS)

    1994-09-01

    This plan summarizes the real estate requirements of the US Department of Energy's (DOE) Uranium Mill Tailings Action (UMTRA) Project, identifies the roles and responsibilities of project participants involved in real estate activities, and describes the approaches used for completing these requirements. This document is intended to serve as a practical guide for all project participants. It is intended to be consistent with all formal agreements, but if a conflict is identified, the formal agreements will take precedence

  5. Housing and population sprawl near tailings storage facilities in the Witwatersrand: 1952 to current

    Directory of Open Access Journals (Sweden)

    Melanie A. Kneen

    2015-11-01

    Full Text Available Mining, tailings storage facilities (TSFs, dust pollution and growth in residential housing development are synonymous with the Witwatersrand, South Africa. Encroachment of housing onto land close to TSFs, i.e. areas rendered marginal because of the dust hazard and risk of structural failure, has continued unabated for decades, intensifying human exposure to windblown mineral dust. Recent research indicates that the finer milling used for modern gold extraction results in aeolian dust emanating from the TSFs which contributes to a higher proportion of inhalable particles in the source material. Air quality dispersion modelling, validated by ambient aerosol monitoring campaigns, indicates that episodic dust events generate particulate matter (PM10 and, specifically, quartz dust concentrations that are unhealthy at distances of up to 2 km downwind from TSFs. This contribution documented residential development from 1952 to 2011 (using historical aerial photographs, census data from 2001 and 2011 and ancillary information to determine the population exposed to dust emanations from the TSFs. Using the images, land use was classified into residential areas, TSF footprints and open areas, onto which a series of 500 m buffer zone contours were superimposed. The resulting statistics were used to assess the populations exposed to dust hazard within the defined buffer zones. Overall, housing development has experienced a growth of approximately 700% since 1952 at a rate of 14% per year. Analysis of recent monitoring campaign data has confirmed multiple occurrences of quartzrich inhalable dust in residential settings at levels that exceed occupational health standards, extrapolated to values for population exposure.

  6. Safety Management for Water Play Facilities.

    Science.gov (United States)

    Thompson, Claude

    1986-01-01

    Modern aquatic facilities, which include wave pools, water slides, and shallow water activity play pools, have a greater potential for injuries and lawsuits than conventional swimming pools. This article outlines comprehensive safety management for such facilities, including potential accident identification and injury control planning. (MT)

  7. Facilities management and industrial safety

    International Nuclear Information System (INIS)

    2003-06-01

    This book lists occupation safety and health acts with purpose, definition and management system of safety and health, enforcement ordinance of occupation safety and health acts and enforcement regulations such as general rules, safety and health cover, system of management on safety and health, regulation of management on safety and health, regulations of harmfulness and protection of danger, heath management for workers, supervisor and command and inspection of machine and equipment.

  8. Service quality for facilities management in hospitals

    CERN Document Server

    Sui Pheng, Low

    2016-01-01

    This book examines the Facilities Management (FM) of hospitals and healthcare facilities, which are among the most complex, costly and challenging kind of buildings to manage. It presents and evaluates the FM service quality standards in Singapore’s hospitals from the patient’s perspective, and provides recommendations on how to successfully improve FM service quality and achieve higher patient satisfaction. The book also features valuable supplementary materials, including a checklist of 32 key factors for successful facilities management and another checklist of 24 service attributes for hospitals to achieve desirable service quality in connection with facilities management. The book adopts a unique approach of combining service quality and quality theory to provide a more holistic view of how FM service quality can be achieved in hospitals. It also integrates three instruments, namely the SERVQUAL model, the Kano model and the QFD model to yield empirical results from surveys for implementation in hosp...

  9. Location - Managed Facility - St. Paul District (MVP)

    Data.gov (United States)

    Army Corps of Engineers, Department of the Army, Department of Defense — St. Paul District - US Army Corps of Engineers Managed Facility locations. District headquarters, Natural Resource, Recreation, Lock and Dam, and Regulatory offices...

  10. How can facility managers add value?

    DEFF Research Database (Denmark)

    Jensen, Per Anker; van der Voordt, Theo

    2015-01-01

    Recent years have seen a growing interest in the concept of added value of facilities management (FM) and corporate real estate management (CREM), and how to attain and measure it. There is a wide variety of definitions in use, and recognition of different types of added value, such as user value......, customer value, financial value, environmental value and relationship value.......Recent years have seen a growing interest in the concept of added value of facilities management (FM) and corporate real estate management (CREM), and how to attain and measure it. There is a wide variety of definitions in use, and recognition of different types of added value, such as user value...

  11. Citizen knowledge and perception of black-tailed prairie dog management: Report to respondents

    Science.gov (United States)

    Sexton, Natalie R.; Brinson, Ayeisha; Ponds, Phadrea D.; Cline, Kurt; Lamb, Berton L.

    2001-01-01

    What do citizens know about black-tailed prairie dogs, and where do they get their information? When management decisions need to be made regarding an animal such as the black-tailed prairie dog, an understanding of the species and its relationship to humans is necessary. This includes knowing the biology of the animal, where it lives, and how it interacts with other animals. But it is equally important for those making decisions about the species to understand citizens’ knowledge and perceptions so managers can effectively communicate with the public and help the public participate in planning and decision making activities. Unfortunately, what is known about public knowledge, perception, and preferences concerning prairie dog management is limited to data from only a few areas. This study attempts to answer the question: What do people in the short-grass prairie region of the United States know and think about black-tailed prairie dogs?

  12. Legal regime of water management facilities

    Directory of Open Access Journals (Sweden)

    Salma Jožef

    2013-01-01

    Full Text Available The paper analyzes the legal regime of water management facilities in the light of Serbian, foreign and European law. Different divisions of water management facilities are carried out (to public and private ones, natural and artificial ones, etc., with determination of their legal relevance. Account is taken of the issue of protection from harmful effects of waters to such facilities, as well. The paper points also to rules on the water management facilities, from acts of planning, to individual administrative acts and measures for maintenance of required qualitative and quantitative condition of waters, depending on their purpose (general use or special, commercial use o waters. Albeit special rules on water management facilities exist, due to the natural interlocking between all the components of the environment (water, air and soil, a comprehensive approach is required. A reference is made to other basic principles of protection of water management facilities as well, such as the principle of prevention, principle of sustainable development and the principle "polluter pays". The last one represents the achievement of contemporary law, which deviates from the idea accepted in the second half of 20th century that supported the socialization of risk from harmful effects of waters.

  13. Improvement of management systems for nuclear facilities

    International Nuclear Information System (INIS)

    2005-01-01

    The area of Quality Management/ Quality Assurance has been changed dramatically over the past years. The nuclear facilities moved from the 'traditional' Quality Assurance approach towards Quality Management Systems, and later a new concept of Integrated Management Systems was introduced. The IAEA is developing a new set of Standards on Integrated Management Systems, which will replace the current 50-C-Q/SG-Q1-Q14 Code. The new set of document will require the integration of all management areas into one coherent management system. The new set of standards on Management Systems promotes the concept of the Integrated Management Systems. Based on new set a big number of documents are under preparation. These documents will address the current issues in the management systems area, e.g. Management of Change, Continuous Improvement, Self-assessment, and Attributes of effective management, etc. Currently NPES is providing a number of TC projects and Extra Budgetary Programmes to assist Member States in this area. The new Standards on Management Systems will be published in 2006. A number of Regulatory bodies already indicated that they would take the new Management System Standards as a basis for the national regulation. This fact will motivate a considerable change in the management of nuclear utilities, requiring a new approach. This activity is suitable for all IAEA Members States with large or limited nuclear capabilities. The service is directed to provide assistance for the management of all organizations carrying on or regulating nuclear activities and facilities

  14. Best Practices in Facility Management

    National Research Council Canada - National Science Library

    Neve, Trevor

    1999-01-01

    .... While the Logistics Management Institute's benchmark database has served as a cornerstone in helping to initiate change, data and metrics go only so far in implementing better ways of doing business...

  15. Daily storage management of hydroelectric facilities

    NARCIS (Netherlands)

    Chappin, E.J.L.; Ferrero, M.; Lazzeroni, P.; Lukszo, Z.; Olivero, M.; Repetto, M.

    2012-01-01

    This work presents a management procedure for hydroelectric facilities with daily storage. The water storage gives an additional degree of freedom allowing to shift in time power production when it is more convenient and to work at the maximum efficiency of hydraulic turbine. The management is

  16. The strategic facilities management organisation in housing

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Jensen, Per Anker; Jensen, Jesper Ole

    2012-01-01

    Two houses in the same street can be built in the same year, they can look the same, and still they might provide very different support for sustainable living. This article points to the Strategic Facilities Management Organisation (SFMO) as the most important concept, to understand and manage...... literature on sustainable facilities management, where it fills a gap as it deals with housing and strategic FM. Intended readers are those interested in housing administration and especially the transition of existing housing into more sustainable housing. Intended readers include building owners, policy...

  17. The strategic facilities management organisation in housing

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Jensen, Per Anker; Jensen, Jesper Ole

    2012-01-01

    Two houses in the same street can be built in the same year, they can look the same, and still they might provide very different support for sustainable living. This article points to the Strategic Facilities Management Organisation (SFMO) as the most important concept, to understand and manage...... implementation of sustainable facilities management in housing administration. The concept provides a frame for understanding the roles and relations of tenants, owners, administrators and operators. The paper is based on a Danish research project on environmentally sound building operation including literature...... literature on sustainable facilities management, where it fills a gap as it deals with housing and strategic FM. Intended readers are those interested in housing administration and especially the transition of existing housing into more sustainable housing. Intended readers include building owners, policy...

  18. Håndbog i Facilities Management

    DEFF Research Database (Denmark)

    Jensen, Per Anker

    Facilities Management (FM) er et nyt nøgleord som mange nu anvender i forskellige forbindelser og sammenhænge. Dette hænger i høj grad sammen med manglen på en fælles dansk referenceramme for FM, der har givet frit spillerum for de mange forskellige definitioner af det engelske ord. Dansk...... Facilities Management netværk (DFM netværk) har i mange år arbejdet for en fælles definition af begrebet sammen med arbejdet for udbredelsen af kendskabet til FM, herunder uddannelse, erfaringsudveksling m.v. DFM netværk har udgivet en Håndbog i Facilities Management i samarbejde med bogens forfatter Per......, strategisk planlægning, space management, ejendomsdrift og services. Hertil kommer en generel introduktion til FM samt en status for udbredelsen af FM generelt i Danmark og internationalt....

  19. XML Based Scientific Data Management Facility

    Science.gov (United States)

    Mehrotra, P.; Zubair, M.; Bushnell, Dennis M. (Technical Monitor)

    2002-01-01

    The World Wide Web consortium has developed an Extensible Markup Language (XML) to support the building of better information management infrastructures. The scientific computing community realizing the benefits of XML has designed markup languages for scientific data. In this paper, we propose a XML based scientific data management ,facility, XDMF. The project is motivated by the fact that even though a lot of scientific data is being generated, it is not being shared because of lack of standards and infrastructure support for discovering and transforming the data. The proposed data management facility can be used to discover the scientific data itself, the transformation functions, and also for applying the required transformations. We have built a prototype system of the proposed data management facility that can work on different platforms. We have implemented the system using Java, and Apache XSLT engine Xalan. To support remote data and transformation functions, we had to extend the XSLT specification and the Xalan package.

  20. Los Alamos Plutonium Facility Waste Management System

    International Nuclear Information System (INIS)

    Smith, K.; Montoya, A.; Wieneke, R.; Wulff, D.; Smith, C.; Gruetzmacher, K.

    1997-01-01

    This paper describes the new computer-based transuranic (TRU) Waste Management System (WMS) being implemented at the Plutonium Facility at Los Alamos National Laboratory (LANL). The Waste Management System is a distributed computer processing system stored in a Sybase database and accessed by a graphical user interface (GUI) written in Omnis7. It resides on the local area network at the Plutonium Facility and is accessible by authorized TRU waste originators, count room personnel, radiation protection technicians (RPTs), quality assurance personnel, and waste management personnel for data input and verification. Future goals include bringing outside groups like the LANL Waste Management Facility on-line to participate in this streamlined system. The WMS is changing the TRU paper trail into a computer trail, saving time and eliminating errors and inconsistencies in the process

  1. Håndbog i Facilities Management

    DEFF Research Database (Denmark)

    Jensen, Per Anker

    Facilities Management netværk (DFM netværk) har i mange år arbejdet for en fælles definition af begrebet sammen med arbejdet for udbredelsen af kendskabet til FM, herunder uddannelse, erfaringsudveksling m.v. DFM netværk har udgivet en Håndbog i Facilities Management i samarbejde med bogens forfatter Per......Facilities Management (FM) er et nyt nøgleord som mange nu anvender i forskellige forbindelser og sammenhænge. Dette hænger i høj grad sammen med manglen på en fælles dansk referenceramme for FM, der har givet frit spillerum for de mange forskellige definitioner af det engelske ord. Dansk......, strategisk planlægning, space management, ejendomsdrift og services. Hertil kommer en generel introduktion til FM samt en status for udbredelsen af FM generelt i Danmark og internationalt....

  2. Costs and benefits of alternatives for mill-tailings management: a perspective

    International Nuclear Information System (INIS)

    Chee, P.C.; Yuan, Y.C.; Roberts, C.J.

    1983-01-01

    Past milling of uranium and thorium ore in the United States has produced tailings that are stored at numerous sites around the country. Some of these storage sites are located near towns and cities, and the local populations are exposed to radiation and radioactive materials migrating off the sites. The federal government has initiated remedial action programs (for example the Uranium Mill Tailings Remedial Action Program and the Formerly Utilized Sites Remedial Action Program) to clean up land and buildings that have become contaminated with radioactive material and thus eliminate or reduce population exposure to radiation. The degree of long-term benefit from any reduction of the population dose will be different for each remedial action, as will the cost. To gain a perspective on the cost-benefit ratios of various alternatives (remedial actions), estimates are made of the potential radiation doses to affected populations near two inactive sites and of the costs associated with (1) onsite stabilization of radioactive tailings, and (2) transportation of tailings to remote locations for stabilization. The calculations presented in this paper were based on actual conditions at an inactive uranium mill tailings site (the Vitro site in Salt Lake City, Utah) and at a former thorium-processing facility (Kerr-McGee site in West Chicago, Illinois)

  3. The Nature and Articulation of Ethical Codes on Tailings Management in South Africa

    Directory of Open Access Journals (Sweden)

    Tobius Thobile Poswa

    2017-10-01

    Full Text Available It is well recognized that the mining industry in South Africa is highly rated for its substantial contribution to the country’s economic growth, including employment and infrastructural development. It is also known that mining and ore processing activities potentially pose a severe threat to public health and environmental well-being, in the way operations are carried out, mine wastes are disposed of (in dumps, local communities are relocated, mine management and the mining community, in general, perceive established environmental standards and etiquette. This paper examines ethical practices and norms in the South African mining industry, with particular reference to the management of tailings dams. We analyse the modes of articulation of the country’s regulatory instruments for tailings management, and review the corporate social responsibility (CSR approach of leading mining companies. Despite decades of research and resulting recommendations on tailings management, it is concluded that the current legislations are largely ineffective, that the level of adherence by mine management and the mining community is low, and that the mechanisms for compliance monitoring is weak. New perspectives on legislative issues for unsolved problems in tailings handling are put forward, and directions for future research, indicated.

  4. Configuration Management Maturity in Scientific Facilities

    Directory of Open Access Journals (Sweden)

    Masoud Niknam

    2013-12-01

    Full Text Available Since the effectiveness of the development and operation of scientific facilities (especially those presenting specific hazards, such as ionizing radiations relies heavily on state of the art practices, such as systems engineering and product lifecycle management, configuration management (CM is becoming a key management process. However, while some maturity models exist to assess the degree of the implementation and effectiveness of many management processes, such as project management or systems engineering, there is no specific framework available to assess the degree of maturity of an organization towards CM. This paper focuses on revealing the important maturity dimensions and levels for CM as a means towards developing a CM maturity model.

  5. Facilities management contracting: the key to effective change management.

    Science.gov (United States)

    Meads, S

    1993-01-01

    Facilities Management Contracting is a catalyst for developing high performance individuals and teams to deliver value for money in today's demanding funding environment. It is a key to unlocking individuals' creativity, and learning, through effective change management strategies, and to developing organisational processes and structures to promote this. Sarah Meads, General Manager of Serco Health Services, explores how health providers could make more effective use of Facilities Management Contracting to release the potential that already exists within their organisations by thinking of Facilities Management as a change management tool. Serco Health Services is the division of Serco Group NZ Limited responsible for assisting healthcare providers to review and manage a wide range of non-core support services.

  6. Potential of Computerized Maintenance Management System in Facilities Management

    Directory of Open Access Journals (Sweden)

    Noor Farisya Azahar

    2014-07-01

    Full Text Available For some time it has been clear that managing buildings or estates has been carried out in the context of what has become known as facilities management. British Institute of Facilities Management defined facilities management is the integration of multi-disciplinary activities within the built environment and the management of their impact upon people and the workplace. Effective facilities management is vital to the success of an organisation by contributing to the delivery of its strategic and operational objectives. Maintenance of buildings should be given serious attention before (stage design, during and after a building is completed. But total involvement in building maintenance is after the building is completed and during its operations. Residents of and property owners require their building to look attractive, durable and have a peaceful indoor environment and efficient. The objective of the maintenance management system is to stream line the vast maintenance information system to improve the productivity of an industrial plant. a good maintenance management system makes equipment and facilities available. This paper will discuss the fundamental steps of maintenance management program and Computerized Maintenance Management System (CMMS

  7. Quality management in nuclear facilities decommissioning

    International Nuclear Information System (INIS)

    Garonis, Omar H.

    2002-01-01

    Internationally, the decommissioning organizations of nuclear facilities carry out the decommissioning according to the safety requirements established for the regulatory bodies. Some of them perform their activities in compliance with a quality assurance system. This work establishes standardization through a Specifications Requirement Document, for the management system of the nuclear facilities decommissioning organizations. It integrates with aspects of the quality, environmental, occupational safety and health management systems, and also makes these aspects compatible with all the requirements of the nuclear industry recommended for the International Atomic Energy Agency (IAEA). (author)

  8. Sustainability and the facilities management in Malaysia

    Directory of Open Access Journals (Sweden)

    Asbollah Asra Zaliza

    2016-01-01

    Full Text Available Facilities Management (FM in the industry of environment involves numerous expertise, especially from the management side. Other than that, technology and finance are the other factors involved as well. One essential aspect of FM, other than the emphasis on technical operation, is its performance. In parallel, the performance does impact occupant behaviour and, at the same time, this performance does affect the environment. In short, this indicates that FM is in a key position to participate in delivering a sustainable environment for the industry of built environment. Sustainable facilities Management (SFM is crucial because buildings consume more resources which will, in consequence, negatively impact the environment and generate large amounts of waste. This justifies the importance of sustainability under the umbrella of facilities management. However, FM is quite new in Malaysia’s environment. Government agencies, such as JKR, have adopted and are practicing FM at the moment. Fortunately, there has been an increasing trend and awareness of SFM adoption. Therefore, this paper aims to understand and identify the contribution and practices of Sustainable Facilities Management (SFM in Malaysia; focusing on the development taken in regards to SFM.

  9. Waste Management Facilities Cost Information Report

    International Nuclear Information System (INIS)

    Feizollahi, F.; Shropshire, D.

    1992-10-01

    The Waste Management Facility Cost Information (WMFCI) Report, commissioned by the US Department of Energy (DOE), develops planning life-cycle cost (PLCC) estimates for treatment, storage, and disposal facilities. This report contains PLCC estimates versus capacity for 26 different facility cost modules. A procedure to guide DOE and its contractor personnel in the use of estimating data is also provided. Estimates in the report apply to five distinctive waste streams: low-level waste, low-level mixed waste, alpha contaminated low-level waste, alpha contaminated low-level mixed waste, and transuranic waste. The report addresses five different treatment types: incineration, metal/melting and recovery, shredder/compaction, solidification, and vitrification. Data in this report allows the user to develop PLCC estimates for various waste management options

  10. Waste Management Facilities Cost Information Report

    Energy Technology Data Exchange (ETDEWEB)

    Feizollahi, F.; Shropshire, D.

    1992-10-01

    The Waste Management Facility Cost Information (WMFCI) Report, commissioned by the US Department of Energy (DOE), develops planning life-cycle cost (PLCC) estimates for treatment, storage, and disposal facilities. This report contains PLCC estimates versus capacity for 26 different facility cost modules. A procedure to guide DOE and its contractor personnel in the use of estimating data is also provided. Estimates in the report apply to five distinctive waste streams: low-level waste, low-level mixed waste, alpha contaminated low-level waste, alpha contaminated low-level mixed waste, and transuranic waste. The report addresses five different treatment types: incineration, metal/melting and recovery, shredder/compaction, solidification, and vitrification. Data in this report allows the user to develop PLCC estimates for various waste management options.

  11. ICT Adoption in Facilities Management Supply Chain

    DEFF Research Database (Denmark)

    Scupola, Ada

    2012-01-01

    This article involves a qualitative study of factors impacting the adoption of ICT solutions in the Danish facility management supply chain. The results show that there are a number of drivers and barriers that influence the adoption of ICT solutions in this service sector. These have been groupe...

  12. 7 CFR 210.13 - Facilities management.

    Science.gov (United States)

    2010-01-01

    ..., the added text is set forth as follows: § 210.13 Facilities management. (c) Food safety program. The... points; (iii) Determine the critical limits; (iv) Establish procedures to monitor critical control points... critical limits; (iv) Monitoring procedures; (v) Corrective action procedures; (vi) Recordkeeping...

  13. Managing Educational Facilities and Students' Enrolment in ...

    African Journals Online (AJOL)

    A Standardized research Instrument was used: Managing Educational Facilities and Students Enrolment Questionnaire (MEFSEQ). The Instrument was content, construct and face validated while its reliability co- efficient was established through the test -retest method of 0.84. Inferential Statistics of Pearson Product Moment ...

  14. 40 CFR 792.31 - Testing facility management.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 31 2010-07-01 2010-07-01 true Testing facility management. 792.31... facility management. For each study, testing facility management shall: (a) Designate a study director as... personnel, resources, facilities, equipment, materials and methodologies are available as scheduled. (f...

  15. Scientific Considerations for the Assessment and Management of Mine Tailings Disposal in the Deep Sea

    Directory of Open Access Journals (Sweden)

    Lindsay L. Vare

    2018-02-01

    Full Text Available Deep-sea tailings disposal (DSTD and its shallow water counterpart, submarine tailings disposal (STD, are practiced in many areas of the world, whereby mining industries discharge processed mud- and rock-waste slurries (tailings directly into the marine environment. Pipeline discharges and other land-based sources of marine pollution fall beyond the regulatory scope of the London Convention and the London Protocols (LC/LP. However, guidelines have been developed in Papua New Guinea (PNG to improve tailings waste management frameworks in which mining companies can operate. DSTD can impact ocean ecosystems in addition to other sources of stress, such as from fishing, pollution, energy extraction, tourism, eutrophication, climate change and, potentially in the future, from deep-seabed mining. Environmental management of DSTD may be most effective when placed in a broader context, drawing expertise, data and lessons from multiple sectors (academia, government, society, industry, and regulators and engaging with international deep-ocean observing programs, databases and stewardship consortia. Here, the challenges associated with DSTD are identified, along with possible solutions, based on the results of a number of robust scientific studies. Also highlighted are the key issues, trends of improved practice and techniques that could be used if considering DSTD (such as increased precaution if considering submarine canyon locations, likely cumulative impacts, and research needed to address current knowledge gaps.

  16. FFTF [Fast Flux Test Facility] management

    International Nuclear Information System (INIS)

    Bennett, C.L.

    1986-11-01

    Fuel Management at the Fast Flux Test Facility (FFTF) involves more than just the usual ex-core and in-core management of standard fuel and non-fuel components between storage locations and within the core since it is primarily an irradiation test facility. This mission involves testing an ever increasing variety of fueled and non-fueled experiments, each having unique requirements on the reactor core as well as having its own individual impact on the reload design. This paper describes the fuel management process used by the Westinghouse Hanford Company Core Engineering group that has led to the successful reload design of nine operating cycles and the irradiation of over 120 tests

  17. Innovative Procurement and Partnerships in Facilities Management

    DEFF Research Database (Denmark)

    Jensen, Per Anker

    2011-01-01

    A major study of facilities management best practice covering 36 cases from the Nordic countries in Europe shows, that the most outstanding examples of innovation in FM are initiated from the demand side and involves new forms of procurement with long term contracts. This paper considers in depth......-called operational partnerships with private providers concerning all municipal buildings and sports facilities in parts of a city. Each of the case studies has involved both the client and the provider side of the collaboration. The cases show that an essential element in a successful procurement and partnership...

  18. Rehabilitation of uranium tailings impoundments

    International Nuclear Information System (INIS)

    Crawley, A.H.

    1983-01-01

    Under Australian environmental controls relating to the management of uranium tailings, it is no longer acceptable practice to search for a rehabilitation strategy at the end of production when the generation of tailings has ceased. The uranium projects currently in production and those being proposed are tightly regulated by the authorities. The waste management plans must consider site specific factors and must include selection of appropriate disposal sites and design for long term containment. The final encapsulation in engineered facilities must take into account the probable routes to the environment of the tailings. Rehabilitation shoud be undertaken by the mining and milling operators to standards approved by appropriate authorities. Appropriate administrative arrangements are required, by way of technical committees and financial bonds to ensure that agreed standards of rehabilitation may be achieved. Past and present experience with the rehabilitation of uranium tailings impoundments in Australia is discussed

  19. A study on relationship between tail risk on earning management in Iranian banking industry

    Directory of Open Access Journals (Sweden)

    Mohammad Khodaei Valahzaghard

    2013-02-01

    Full Text Available Risk management plays an important role in banking industry and there are literally many investigations to reduce any risk components in this industry. In this paper, we present a study on relationship between tail risk on earning management in Iranian banking industry. In this survey, we use two series of data. The first set is associated with yearly information of 19 different banks over the period 2005-2011 and it contains 114 observations. The second set of data includes weekly historical data of eight banks over the same period 2005-2011. In this survey, there are four objectives to be investigated. The first hypothesis considers the effects of seven independent variables on loan loss allowance as a fraction of total loans. The second model is associated with the effects of two independent variables on realized gains and losses on securities. The third objective is to study the effects of different independent variables with various interruptions on return of banking sectors. Finally, the last model investigates the effects of revenue management on tail risk. The result of this survey indicates that there is no relationship between tail risk and earning management.

  20. Formulary management in a military treatment facility.

    Science.gov (United States)

    Carr, V F; Walker, J C

    1997-03-01

    In an environment of increased fiscal responsibility and cost constraints, the medical staff must take an active role in deciding how an institution's operating budget is spent. A major expense of a military treatment facility (MTF) is maintaining an adequate and cost-effective formulary. The large number of pharmaceuticals available on the market forces a decision regarding which products to stock. Decision analysis is a technique that helps a medical staff to manage its formulary by listing all of the objective and subjective considerations. The Department of Defense Pharmacoeconomic Center has developed a tri-service formulary to standardize a basic drug list that would be available in each military treatment facility. However, this list cannot be expected to answer all of the factors a medical staff must weigh in developing an MTF-specific formulary. Many considerations must be addressed in these decisions, including the beneficiary population, the potential diagnoses as defined by a database such as the Retrospective Case Mix Analysis System or the Military Health Services System, the institution's mission and defined scope of care, physician interests and specialization, and facility limitations. Military treatment facilities can maintain an appropriate stock of medications that is specific for the scope and practice of a medical staff and work within a budget through careful planning and employment of a decision matrix. This balance of appropriateness and fiscal responsibility allows the maximum range of services within a facility.

  1. Innovative Procurement and Partnerships in Facilities Management

    DEFF Research Database (Denmark)

    Jensen, Per Anker

    2010-01-01

    Aim: The aim of the paper is to present, analyse and identify learning from two case studies of innovative procurement in Facilities Management (FM) concerning the establishments of partnerships between clients and providers. Approach and methodology: A major study of FM best practice covering 36...... municipal buildings and sports facilities in parts of the city of Copenhagen. Each of the case studies has involved both the client and the provider side of the collaboration. The paper presents, compare and analyze the two cases regarding intentions, procurement methods, forms of collaborations...... strong requirements on the management style and company culture. Limitations of the research: The research is only based on two case studies, which obviously limits the possibility to generalize the results. Practical applications: The research presents two specific examples of innovative procurement...

  2. The U.S. regulatory framework for long-term management of uranium mill tailings

    International Nuclear Information System (INIS)

    Smythe, C.; Bierley, D.; Bradshaw, M.

    1995-01-01

    The US established the regulatory structure for the management, disposal, and long-term care of uranium mill tailings in 1978 with the passage of the Uranium Mill Tailings Radiation Control Act (UMTRCA) (Pub. L. 95-604). This legislation has governed the cleanup and disposal of uranium tailings at both inactive and active sites. The passage of the UMTRCA established a federal regulatory program for the cleanup and disposal of uranium mill tailings in the US. This program involves the DOE, the NRC, the EPA, various states and tribal governments, private licensees, and the general public. The DOE has completed surface remediation at 14 sites, with the remaining sites either under construction or in planning. The DOE's UMTRA Project has been very successful in dealing with public and agency demands, particularly regarding disposal site selection and transportation issues. The active sites are also being cleaned up, but at a slower pace than the inactive sites, with the first site tentatively scheduled for completion in 1996

  3. National Ignition Facility Configuration Management Plan

    International Nuclear Information System (INIS)

    Cabral, S G; Moore, T L

    2002-01-01

    This Configuration Management Plan (CMP) describes the technical and administrative management process for controlling the National Ignition Facility (NIF) Project configuration. The complexity of the NIF Project (i.e., participation by multiple national laboratories and subcontractors involved in the development, fabrication, installation, and testing of NIF hardware and software, as well as construction and testing of Project facilities) requires implementation of the comprehensive configuration management program defined in this plan. A logical schematic illustrating how the plan functions is provided in Figure 1. A summary of the process is provided in Section 4.0, Configuration Change Control. Detailed procedures that make up the overall process are referenced. This CMP is consistent with guidance for managing a project's configuration provided in Department of Energy (DOE) Order 430.1, Guide PMG 10, ''Project Execution and Engineering Management Planning''. Configuration management is a formal discipline comprised of the following four elements: (1) Identification--defines the functional and physical characteristics of a Project and uniquely identifies the defining requirements. This includes selection of components of the end product(s) subject to control and selection of the documents that define the project and components. (2) Change management--provides a systematic method for managing changes to the project and its physical and functional configuration to ensure that all changes are properly identified, assessed, reviewed, approved, implemented, tested, and documented. (3) Data management--ensures that necessary information on the project and its end product(s) is systematically recorded and disseminated for decision-making and other uses. Identifies, stores and controls, tracks status, retrieves, and distributes documents. (4) Assessments and validation--ensures that the planned configuration requirements match actual physical configurations and

  4. Mixed Waste Management Facility Groundwater Monitoring Report

    Energy Technology Data Exchange (ETDEWEB)

    Chase, J.

    1998-03-01

    During fourth quarter 1997, eleven constituents exceeded final Primary Drinking Water Standards (PDWS) in groundwater samples from downgradient monitoring wells at the Mixed Waste Management Facility. No constituents exceeded final PDWS in samples from upgradient monitoring wells. As in previous quarters, tritium and trichloroethylene were the most widespread elevated constituents. The groundwater flow directions and rates in the three hydrostratigraphic units were similar to those of previous quarters.

  5. DROP TAIL AND RED QUEUE MANAGEMENT WITH SMALL BUFFERS:STABILITY AND HOPF BIFURCATION

    Directory of Open Access Journals (Sweden)

    Ganesh Patil

    2011-06-01

    Full Text Available There are many factors that are important in the design of queue management schemes for routers in the Internet: for example, queuing delay, link utilization, packet loss, energy consumption and the impact of router buffer size. By considering a fluid model for the congestion avoidance phase of Additive Increase Multiplicative Decrease (AIMD TCP, in a small buffer regime, we argue that stability should also be a desirable feature for network performance. The queue management schemes we study are Drop Tail and Random Early Detection (RED. For Drop Tail, the analytical arguments are based on local stability and bifurcation theory. As the buffer size acts as a bifurcation parameter, variations in it can readily lead to the emergence of limit cycles. We then present NS2 simulations to study the effect of changing buffer size on queue dynamics, utilization, window size and packet loss for three different flow scenarios. The simulations corroborate the analysis which highlights that performance is coupled with the notion of stability. Our work suggests that, in a small buffer regime, a simple Drop Tail queue management serves to enhance stability and appears preferable to the much studied RED scheme.

  6. Håndbog i Facilities Management

    DEFF Research Database (Denmark)

    Jensen, Per Anker

    Facilities Management (FM) er et nyt nøgleord som mange nu anvender i forskellige forbindelser og sammenhænge. Dette hænger i høj grad sammen med manglen på en fælles dansk referenceramme for FM, der har givet frit spillerum for de mange forskellige definitioner af det engelske ord. Dansk...... Facilities Management netværk (DFM netværk) har i mange år arbejdet for en fælles definition af begrebet sammen med arbejdet for udbredelsen af kendskabet til FM, herunder uddannelse, erfaringsudveksling m.v. DFM netværk har udgivet en Håndbog i Facilities Management i samarbejde med bogens forfatter Per...... gennemgår alle aspekter af FM. Bogen gennemgår således en række mere traditionelle begreber, men kommer også igennem nyere begreber som out-sourcing, sale- and leaseback, benchmarking og mange andre. Forfatteren gennemgår i 10 kapitler så forskellige elementer som ledelse og organisation, økonomistyring...

  7. Screening criteria for siting waste management facilities: Regional Management Plan

    International Nuclear Information System (INIS)

    1986-01-01

    The Midwest Interstate Low-Level Radioactive Waste Commission (Midwest Compact) seeks to define and place into operation a system for low-level waste management that will protect the public health and safety and the environment from the time the waste leaves its point of origin. Once the system is defined it will be necessary to find suitable sites for the components of that waste management system. The procedure for siting waste management facilities that have been chosen by the compact is one in which a host state is chosen for each facility. The host state is then given the freedom to select the site. Sites will be needed of low-level waste disposal facilities. Depending on the nature of the waste management system chosen by the host state, sites may also be needed for regional waste treatment facilities, such as compactors or incinerators. This report provides example criteria for use in selecting sites for low-level radioactive waste treatment and disposal facilities. 14 refs

  8. Federal facilities compliance act waste management

    International Nuclear Information System (INIS)

    Bowers, J.; Gates-Anderson, D.; Hollister, R.; Painter, S.

    1999-01-01

    Site Treatment Plans (STPs) developed through the Federal Facilities Compliance Act pose many technical and administrative challenges. Legacy wastes managed under these plans require Land Disposal Restriction (LDR) compliance through treatment and ultimate disposal. Although capacity has been defined for most of the Department of Energy wastes, many waste streams require further characterization and many need additional treatment and handling beyond LDR criteria to be able to dispose of the waste. At Lawrence Livermore National Laboratory (LLNL), the Hazardous Waste Management Division has developed a comprehensive Legacy Waste Program. The program directs work to manage low level and mixed wastes to ensure compliance with nuclear facility rules and its STP. This paper provides a survey of work conducted on these wastes at LLNL. They include commercial waste treatment and disposal, diverse forms of characterization, inventory maintenance and reporting, on-site treatment, and treatability studies. These activities are conducted in an integrated fashion to meet schedules defined in the STP. The processes managing wastes are dynamic due to required integration of administrative, regulatory, and technical concerns spanning the gamut to insure safe proper disposal

  9. Recent developments in the regulation and management of Canadian uranium tailings

    International Nuclear Information System (INIS)

    Bragg, K.; Potter, C.; James, A.

    1982-01-01

    The last two to three years have produced rapid changes in the way uranium tailings are managed in Canada. This is due both to the development of new technology and changes in regulatory approach. The thrust of this paper will be to clarify the interrelationships between these two areas with a particular focus on long-term management. The interaction between federal and provincial agencies will also be reviewed to illustrate how a co-operative regulatory approach works, even in areas of complex and sometimes confusing jurisdiction

  10. Life cycle cost estimation and environmental valuation of coal mine tailings management

    Directory of Open Access Journals (Sweden)

    Joni Safaat Adiansyah

    2017-01-01

    Full Text Available Sustainable mining management is increasingly seen as an important issue in achieving a social license to operate for mining companies. This study describes the life cycle cost (LCC analysis and environmental valuation for several coal mine tailings management scenarios. The economic feasibility of six different options was assessed using the Net Present Value (NPV and Benefit-Cost Analysis (BCA methods. These options were belt press (OPT 1, tailings paste (OPT 2, thickened tailings (OPT 3, and OPT 1 with technology improvement and renewable energy sources (OPT 1A-C. The results revealed that OPT 1A (belt press technology with stack cell flotation was the first preference in terms of LCC while OPT 1C (belt press technology with stack cell flotation and 10% wind energy generated the highest benefits value (BCA compared to the other options. The LCC and BCA components and the volume of GHG emissions were used to determine the best option. Normalization of these three elements resulted in the selection of Option 1C as being the most cost-effective option.

  11. 40 CFR 160.31 - Testing facility management.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Testing facility management. 160.31... GOOD LABORATORY PRACTICE STANDARDS Organization and Personnel § 160.31 Testing facility management. For each study, testing facility management shall: (a) Designate a study director as described in § 160.33...

  12. Radioactive waste management from nuclear facilities

    International Nuclear Information System (INIS)

    2005-06-01

    This report has been published as a NSA (Nuclear Systems Association, Japan) commentary series, No. 13, and documents the present status on management of radioactive wastes produced from nuclear facilities in Japan and other countries as well. Risks for radiation accidents coming from radioactive waste disposal and storage together with risks for reactor accidents from nuclear power plants are now causing public anxiety. This commentary concerns among all high-level radioactive waste management from nuclear fuel cycle facilities, with including radioactive wastes from research institutes or hospitals. Also included is wastes produced from reactor decommissioning. For low-level radioactive wastes, the wastes is reduced in volume, solidified, and removed to the sites of storage depending on their radioactivities. For high-level radioactive wastes, some ten thousand years must be necessary before the radioactivity decays to the natural level and protection against seismic or volcanic activities, and terrorist attacks is unavoidable for final disposals. This inevitably results in underground disposal at least 300 m below the ground. Various proposals for the disposal and management for this and their evaluation techniques are described in the present document. (S. Ohno)

  13. Oilsand tailings : solving the issues

    Energy Technology Data Exchange (ETDEWEB)

    Granson, E.

    2008-11-15

    Oilsands tailings management is an integral part of oil sands research and development. Studies to decrease land disturbance and to resolve environmental and safety issues are underway at several government agencies and industry groups, including the Alberta Energy Research Institute, the Oil Sands Tailings Research Facility and Natural Resources Canada's CANMET Advanced Separation Technologies division. Fresh tailings that come from the bitumen extraction process are composed of 85 to 90 per cent water and 10 to 15 per cent solids having the consistency of muddy water. The 3 zones that develop following discharge into the tailings ponds are 3 metres of clear water; residual hydrocarbons that float on the surface; and, a 1 metre zone of water and settling clay particles known as mature fine tailings (MFT) which comprise about 90 per cent of the volume of the tailings pond. The tailings ponds must be built in areas where there is no bitumen suitable for surface mining. The impounded area is surrounded by tailings dykes built from local overburden materials. As such, tailings ponds are managed as dams according to Alberta Dam Safety regulation requirements. Dam stability is increased by the installation of internal seepage control measures. This article described the key guidelines and objectives for the construction of tailings ponds. It also described the 3 primary types of reclamation settings, namely aquatic reclamation, wetland reclamation and terrestrial reclamation. Water removed from the MFT can be recycled back to the plant to reduce the amount of water used from the river. Although this contributes to lower energy costs, there are challenges regarding salt levels that builds up in piping and equipment. The presence of water in the tailings also prevents tailings reclamation. In addition to mechanical systems to remove water, researchers are also considering the use of chemicals and natural processes. In the consolidated tailings (CT) process, the

  14. National Ignition Facility Site Management Plan

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, V.

    1997-09-01

    The purpose of the NIF Site Management Plan is to describe the roles, responsibilities, and interfaces for the major NIF Project organizations involved in construction of the facility, installation and acceptance testing of special equipment, and the NIF activation. The plan also describes the resolution of priorities and conflicts. The period covered is from Critical Decision 3 (CD3) through the completion of the Project. The plan is to be applied in a stepped manner. The steps are dependent on different elements of the project being passed from the Conventional Facilities (CF) Construction Manager (CM), to the Special Equipment (SE) CMs, and finally to the Activation/ Start-Up (AS) CM. These steps are defined as follows: The site will be coordinated by CF through Project Milestone 310, end of conventional construction. The site is defined as the fenced area surrounding the facility and the CF laydown and storage areas. The building utilities that are installed by CF will be coordinated by CF through the completion of Project Milestone 310, end of conventional construction. The building utilities are defined as electricity, compressed air, de-ionized water, etc. Upon completion of the CF work, the Optics Assembly Building/Laser and Target Area Building (OAB/LTAB) will be fully operational. At that time, an Inertial Confinement Fusion (ICF) Program building coordinator will become responsible for utilities and site activities. * Step 1. Mid-commissioning (temperature stable, +1{degree}C) of an area (e.g., Laser Bay 2, OAB) will precipitate the turnover of that area (within the four walls) from CF to SE. * Step 2. Interior to the turned-over space, SE will manage all interactions, including those necessary by CF. * Step 3. As the SE acceptance testing procedures (ATPS) are completed, AS will take over the management of the area and coordinate all interactions necessary by CF and SE. For each step, the corresponding CMs for CF, SE, or AS will be placed in charge of

  15. National Ignition Facility Site Management Plan

    International Nuclear Information System (INIS)

    Roberts, V.

    1997-01-01

    The purpose of the NIF Site Management Plan is to describe the roles, responsibilities, and interfaces for the major NIF Project organizations involved in construction of the facility, installation and acceptance testing of special equipment, and the NIF activation. The plan also describes the resolution of priorities and conflicts. The period covered is from Critical Decision 3 (CD3) through the completion of the Project. The plan is to be applied in a stepped manner. The steps are dependent on different elements of the project being passed from the Conventional Facilities (CF) Construction Manager (CM), to the Special Equipment (SE) CMs, and finally to the Activation/ Start-Up (AS) CM. These steps are defined as follows: The site will be coordinated by CF through Project Milestone 310, end of conventional construction. The site is defined as the fenced area surrounding the facility and the CF laydown and storage areas. The building utilities that are installed by CF will be coordinated by CF through the completion of Project Milestone 310, end of conventional construction. The building utilities are defined as electricity, compressed air, de-ionized water, etc. Upon completion of the CF work, the Optics Assembly Building/Laser and Target Area Building (OAB/LTAB) will be fully operational. At that time, an Inertial Confinement Fusion (ICF) Program building coordinator will become responsible for utilities and site activities. * Step 1. Mid-commissioning (temperature stable, +1 degree C) of an area (e.g., Laser Bay 2, OAB) will precipitate the turnover of that area (within the four walls) from CF to SE. * Step 2. Interior to the turned-over space, SE will manage all interactions, including those necessary by CF. * Step 3. As the SE acceptance testing procedures (ATPS) are completed, AS will take over the management of the area and coordinate all interactions necessary by CF and SE. For each step, the corresponding CMs for CF, SE, or AS will be placed in charge of

  16. Facilities Management research in the Nordic Countries

    DEFF Research Database (Denmark)

    Jensen, Per Anker

    2011-01-01

    to the establishment of the Centre for Facilities Management – Realdania Research (CFM), and updated information from keynote contributions to CFM’s Nordic FM Conference on 22-23 August 2011 by Suvi Nenonen (Finland), Jan Bröchner (Sweden), Geir K Hansen (Norway) and Per Anker Jensen (Denmark).......This article provides a brief overview of the short history of FM research in Denmark, Norway, Sweden and Finland, and presents current research topics and trends in these countries. It is based on information originally collected as part of the planning for the Danish research programme that led...

  17. Fast flux test facility noise data management

    International Nuclear Information System (INIS)

    Thie, J.A.

    1988-01-01

    An extensive collection of spectra from an automated data collection system at the Fast Flux Facility has features from neutron data extracted and managed by database software. Inquiry techniques, including screening, applied to database results show the influences of control rods on wideband noise and, more generally, abilities to detect diverse types of off-normal noise. Uncovering a temporary 0.1-Hz resonance shift gave additional diagnostic information on a 13-Hz mechanical motion characterized by the interference of two resonances. The latter phenomenon is discussed generically for possible application to other reactor types. (author)

  18. The facilities management market in Denmark

    DEFF Research Database (Denmark)

    Jensen, Per Anker

    2010-01-01

    Purpose: To present the results of market surveys in Denmark, which have been based on and used to test a proposal for a new European standard for a taxonomy of Facilities Management (FM). Design/methodology: The market research included surveys of both the client side and the provider side...... and was carried out by a management consultant company by telephone interviews based on definitions developed from drafts for the European FM taxonomy standard by a university researcher, who is a member of the standardisation work group. Findings: The proposed taxonomy for FM is in general a good basis...... for researching the market but particular the definition of space including acquisition as well as development, administration, operation, maintenance and utilities in the same main product is problematic. Research limitations/implications: The market research is limited to the Danish market, but the results...

  19. The notion of strategy in facility management

    DEFF Research Database (Denmark)

    Holzweber, Markus

    2013-01-01

    and components of strategy in Facility Management (FM). Since strategy refers to a complex network of thoughts, insights, experiences, expertise, and expectations that provide general guidance for management action, organizations must keep pace with the changing environment to increase market shares and business...... success. Based on a literature review, the findings of the study report a service-strategy classification grid. Such a service-strategy grid provides for a better understanding of the business environment. The study findings are intended to enhance business managers’ understandings of the issues behind FM......Strategy implementation is critical for any type of organization. Strategy implementation is complex despite previous research describing mechanisms related to the construction of strategy and strategy use of organizations. In this article I attempt to fill this vacuity by examining strategy...

  20. Managing facilities in a Scandinavian manner:

    DEFF Research Database (Denmark)

    Elle, Morten; Engelmark, Jesper; Jørgensen, Bo

    2004-01-01

    Presents the aims and needs of research in facilities management (FM) at the section of Planning and Management of Building Processes at BYG*DTU. As the building stock in Denmark is rapidly increasing, socio-demographic developments implies profound changes in both the needs of inhabitants...... and the way that buildings are used, combined with an increased consciouness of sustainability. Buildings should be seen as long-term 'investments' while also keeping in mind the construction sector's needs for increased productivity, long-term product quality and enhanced value. This is the background...... for developing a research position. Identifies the Scandinavian Way as using FM on a multiactor level, rather than just to serve the interests of a single organisation. The aim is to focus on small and medium sized enterprises, non-profit associations and tenants, as well as the bodies administrating...

  1. Trends in Facility Management Technology: The Emergence of the Internet, GIS, and Facility Assessment Decision Support.

    Science.gov (United States)

    Teicholz, Eric

    1997-01-01

    Reports research on trends in computer-aided facilities management using the Internet and geographic information system (GIS) technology for space utilization research. Proposes that facility assessment software holds promise for supporting facility management decision making, and outlines four areas for its use: inventory; evaluation; reporting;…

  2. APPLICATION OF POSTFLOTATION TAILINGS IN HYDROENGINEERING STRUCTURES

    Directory of Open Access Journals (Sweden)

    Katarzyna Stefaniak

    2017-01-01

    Full Text Available Economic development stimulated by the increased demand for production of consumer goods and the growing human population result in increasing amounts of various wastes, including tailings. The mining industry in Poland, comprising also mining of non-ferrous metal ores, is a strategic branch of the national economy and at the same time a leading waste producer. Tailings management is a significant problem both in Poland and worldwide. Frequently considerable amounts of wastes are accumulated in mine spoil tips, in areas not always suitable for their deposition, thus leading to the degradation of the surrounding environment. At the huge volume of produced wastes their rational and economically viable management is becoming crucial. On the other hand, depletion of natural aggregate deposits is an important incentive to search for substitutes, which would be suitable for the development of road infrastructure or which could be used in earth structure engineering to construct hydroengineering objects. Since no profitable recovery technologies are available at present, tailings generated by copper mining are deposited in tailings storage facilities. The largest and at the same time the only currently operating facility in Poland is the Żelazny Most Mining Tailings Storage Facility, belonging to KGHM Polska Miedź S.A. The paper presents criteria for material quality and density imposed on the material embedded in the static core of the tailings pond dam. For this purpose studies were conducted to confirm applicability of sorted tailings as a material for the construction of earth structures.

  3. Value Adding Management: A New Facilities Management Concept

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Katchamart, Akarapong

    2011-01-01

    theories on added value of FM and real estate and the related concept of Value Management from building projects. The study is related to the EuroFM research group on The Added Value of FM. Design/methodology/approach: The study outlines a preliminary theoretical based management concept, which...... the relevance of the basic concept and provides an important example of how Value Adding Management can be implemented and added value measured. Originality/value: The study develops a concept of Value Adding Management, which is new in FM literature. It is expected to increase the awareness of the impacts...... and strategic importance of FM for organisations and can be a practical tool for facilities managers in implementing value adding strategies and practices....

  4. ATF [Advanced Toroidal Facility] data management

    International Nuclear Information System (INIS)

    Kannan, K.L.; Baylor, L.R.

    1988-01-01

    Data management for the Advanced Toroidal Facility (ATF), a stellarator located at Oak Ridge National Laboratory (ORNL), is provided by DMG, a locally developed, VAX-based software system. DMG is a data storage and retrieval software system that provides the user interface to ATF raw and analyzed data. Data are described in terms of data models and data types and are organized as signals into files, which are internally documented. The system was designed with user accessibility, software maintainability, and extensibility as primary goals. Extensibility features include compatibility with ATF as it moves from pulsed to steady-state operation and capability for use of the DMG system with experiments other than ATF. DMG is implemented as a run-time library of routines available as a shareable image. General-purpose and specialized data acquisition and analysis applications have been developed using the DMG system. This paper describes the DMG system and the interfaces to it. 4 refs., 2 figs

  5. Usability: managing facilities for social outcomes

    DEFF Research Database (Denmark)

    Alexander, Keith; Blakstad, Siri; Hansen, Geir

    2013-01-01

    The paper argues for the development of usability concepts, methodologies and tools, in considering the effects of the built environment from a user, organisational and community perspective, in order to have a positive influence on social outcomes. Since it was formed over ten years ago, the CIB W......111 on Usability has been exploring concepts, methods and tools, developed in the evaluation of all kinds of consumer products, applied to the built environment. In the most recent phase of this work, conducted over the past three years, an international network of partners has collaborated to focus...... they used to understand, as well as to design and manage the relationship between activities and places. The paper describes and reviews the development of the field of research on usability. It concludes that the action and use of facilities is strongly related to experiences of the users and thus...

  6. Technical Facilities Management, Loan Pool, and Calibration

    Science.gov (United States)

    Smith, Jacob

    2011-01-01

    My work at JPL for the SURF program began on June 11, 2012 with the Technical Facilities Management group (TFM). As well as TFM, I worked with Loan Pool and Metrology to help them out with various tasks. Unlike a lot of other interns, I did not have a specific project rather many different tasks to be completed over the course of the 10 weeks.The first task to be completed was to sort through old certification reports in 6 different boxes to locate reports that needed to be archived into a digital database. There were no reports within these boxes that needed to be archived but rather were to be shredded. The reports went back to the early 1980's and up to the early 2000's. I was looking for reports dated from 2002 to 2012

  7. Wirtschaftlichkeit von Facility Management - Entwicklungen und Trends

    Directory of Open Access Journals (Sweden)

    Redlein, Alexander

    2018-01-01

    Full Text Available Das vorliegende Paper baut auf den jährlichen Umfragen bzw. Studien des Immobilien und Facility Management (IFM der Technischen Universität Wien (TU Wien und der Dissertation von Susanne Hauk aus dem Jahr 2007 auf. Neben der Darstellung allgemeiner Daten konzentriert sich die Arbeit im Wesentlichen auf folgende Forschungsfragen:  In welchen Bereichen können Einsparungen generiert werden?  In welchen Bereichen können Produktivitätssteigerungen lukriert werden?  Mit welchen Problemen/Kostentreibern sind Facility Manager bzw. FM-Abteilungen konfrontiert?  Welche (statistisch signifikanten Zusammenhänge bestehen zwischen verschiedenen Merkmalen/Variablen? Seit dem Jahr 2005 wurden jährlich FM-Verantwortliche von den 500 größten Unternehmen Österreichs befragt. Im Rahmen der Umfrage sollen wissenschaftlich fundiert die obigen Forschungsfragen geklärt werden. Als Werkzeuge für die Datenerhebung wurden das Telefon und/oder elektronische Wege gewählt. Die Umfrage wurde anhand eines standardisierten Fragebogens mit 36 Fragen zu den verschiedensten FM-Bereichen durchgeführt. Im Rahmen der vorliegenden Arbeit sollen die Ergebnisse der aktuellen Umfrage dargestellt und mit den Ergebnissen der Studien der letzten Jahre verglichen werden. Die vorliegende Arbeit beschäftigt sich vor allem mit jenem Teil der Umfrage, der die oben genannten Forschungsfragen behandelt. Ziel ist dabei, die wichtigsten Parameter und Einflussfaktoren in den Bereichen Einsparungen, Produktivitätssteigerungen und Kostentreiber zu identifizieren und die Entwicklungen und Trends näher darzustellen. Dabei zeigt sich, dass effizientes FM große Potentiale in den Bereichen Einsparungen und Produktivitätssteigerungen lukrieren kann. Auch wenn die Einführung von FM zu Beginn mit Kosten/Problemen verbunden ist, so kann dies durch spätere Einsparungen und Produktivitätssteigerungen kompensiert werden.

  8. Effective Utilization Management in a Military Treatment Facility

    National Research Council Canada - National Science Library

    Belisle, Daniel

    1999-01-01

    Healthcare systems and facilities across the country have used utilization management as a response to the pressures of declining revenue, increasingly competitive markets, and escalating operating expenses...

  9. Situation analysis in the field of control and management of uranium tailings in Kyrgyzstan

    International Nuclear Information System (INIS)

    Tolongutov, B.

    2012-01-01

    This article is devoted to situation analysis in the field of control and management of uranium tailings in Kyrgyzstan. The basic sites for control in Kyrgyzstan are: HMP P C 'KGRK', specialized on uranium oxide production (status operating) RSH; storage for low-activity waste (tailings and rock piles) former uranium industry; site for disposal of ionizing radiation sources and radioactive waste in Bishkek city; ionizing radiation sources; medical institutions (X-rays diagnostics, radiotherapy); natural anomaly (local sites with high radiation background). It was concluded that: in existing legislative basis there is a necessity to amend requirements for accepting regulatory provisions on radiation safety; it is necessary to continue working on combination of country's policy and strategy with Fundamental Safety Principles and with International instruments, agreements, codes which were ratified by State; legislative basis documental hierarchy on radiation safety issues is not a complete system, significant number of gaps are defined (more than 60 % from the whole system), basically, related to low stages of hierarchical structure (rules, norms, regulations, instructions and etc.); it is necessary to review existing leading documents with the purpose of inaccuracy correcting, especially in the field of safety statements (especially, it relates to new basic regulation on radiation safety, where contradicting to each other criteria are available, mixing to one 'pile' the concepts of 'dose threshold' and 'dose limits', incomplete and scrappy Radioactive Wastes classification, absence of instructions on ionizing radiation sources categorization and etc.

  10. Cameco engineered tailings program: linking research with industrial processes for improved tailings performance

    International Nuclear Information System (INIS)

    Kotzer, T.; Hendry, M.J.

    2011-01-01

    The waste product from uranium mining and milling that generates the greatest public and regulatory concern is tailings. The tailings contain all of the mined material except uranium plus a host of processing reagents. These minerals and compounds have the potential to harm the local environment if not deposited in a fashion that is both geochemically and geotechnically stable. Environmental leadership impels Cameco Corporation to ensure that the methods used to dispose of tailings are at the forefront of best available technologies whereby tailings production results in a product with geotechnical and geochemical characteristics that minimize the environmental impact associated with long-term storage of this product. Cameco has developed an Engineered Tailings (ET) program to ensure optimization of long-term tailings performance and minimal impacts of elements of concern (EOCs) to the receiving environment, regardless of the ore being milled. Within this program chemical and physical performance of tailings from geochemical and geotechnical investigations and baseline environmental data, integrated with regulatory requirements and corporate commitments, will be used to evaluate and set criteria for mill- and tailings management facilities-based chemical and physical tailings characteristics, identify key knowledge gaps, prioritize areas of concern and implement appropriate responses. This paper provides an overview of the Engineered Tailings program, the research being conducted as part of the ET program, and how it links with present and future Cameco operations. (author)

  11. The tailings technology suite

    Energy Technology Data Exchange (ETDEWEB)

    Jaremko, Deborah

    2011-10-15

    Oilsands tailing ponds contain leftover bitumen and asphaltenes, which are dangerous to local wildlife. The Oil Sands Tailings Consortium (OSTCS) was founded by all major mining players and aims to prompt collaboration within the oilsands industry to reclaim the tailings area. Each company has hitherto worked on different tailings management technologies, often duplicating efforts. Some technologies proposed by these oilsands miners were introduced in this article.

  12. Insect pest management decisions in food processing facilities

    Science.gov (United States)

    Pest management decision making in food processing facilities such as flour mills, rice mills, human and pet food manufacturing facilities, distribution centers and warehouses, and retail stores is a challenging undertaking. Insect pest management programs require an understanding of the food facili...

  13. A Study on Governance for Cooperative Road Facilities Management

    OpenAIRE

    OHNO, Sachiko; TAKAGI, Akiyoshi; KURAUCHI, Fumitaka; DEMURA, Yoshifumi

    2012-01-01

    In Japan, much of road facilities have been built during 60s and 70s and the major maintenance should be carried out for these facilities in the near future. For this, Asset Management System is becoming very important nowadays. However, not many municipalities have implemented the Asset Management system because of the budget and human resource constraints. In order to keep important road facilities with the adequate maintenance level, it is impossible for local municipalities to maintain al...

  14. Management of Decommissioning on a Multi-Facility Site

    International Nuclear Information System (INIS)

    Laraia, Michele; McIntyre, Peter; Visagie, Abrie

    2008-01-01

    The management of the decommissioning of multi-facility sites may be inadequate or inappropriate if based on approaches and strategies developed for sites consisting of only a single facility. The varied nature of activities undertaken, their interfaces and their interdependencies are likely to complicate the management of decommissioning. These issues can be exacerbated where some facilities are entering the decommissioning phase while others are still operational or even new facilities are being built. Multi-facility sites are not uncommon worldwide but perhaps insufficient attention has been paid to optimizing the overall site decommissioning in the context of the entire life cycle of facilities. Decommissioning management arrangements need to be established taking a view across the whole site. A site-wide decommissioning management system is required. This should include a project evaluation and approval process and specific arrangements to manage identified interfaces and interdependencies. A group should be created to manage decommissioning across the site, ensuring adequate and consistent practices in accordance with the management system. Decommissioning management should be aimed at the entire life cycle of facilities. In the case of multi facility sites, the process becomes more complex and decommissioning management arrangements need to be established with a view to the whole site. A site decommissioning management system, a group that is responsible for decommissioning on site, a site project evaluation and approval process and specific arrangements to manage the identified interfaces are key areas of a site decommissioning management structure that need to be addressed to ensure adequate and consistent decommissioning practices. A decommissioning strategy based on single facilities in a sequential manner is deemed inadequate

  15. Ecology and management of white-tailed deer in a changing world.

    Science.gov (United States)

    McShea, William J

    2012-02-01

    Due to chronic high densities and preferential browsing, white-tailed deer have significant impacts on woody and herbaceous plants. These impacts have ramifications for animals that share resources and across trophic levels. High deer densities result from an absence of predators or high plant productivity, often due to human habitat modifications, and from the desires of stakeholders that set deer management goals based on cultural, rather than biological, carrying capacity. Success at maintaining forest ecosystems require regulating deer below biological carrying capacity, as measured by ecological impacts. Control methods limit reproduction through modifications in habitat productivity or increase mortality through increasing predators or hunting. Hunting is the primary deer management tool and relies on active participation of citizens. Hunters are capable of reducing deer densities but struggle with creating densities sufficiently low to ensure the persistence of rare species. Alternative management models may be necessary to achieve densities sufficiently below biological carrying capacity. Regardless of the population control adopted, success should be measured by ecological benchmarks and not solely by cultural acceptance. © 2012 New York Academy of Sciences.

  16. Innovation in Services and Stakeholder Interactions: Cases from Facilities Management

    DEFF Research Database (Denmark)

    Nardelli, Giulia

    organisations and their stakeholders navigate and manage such unfolding to reach successful outcomes. Grounded in the literature and theories on innovation in services, this dissertation adopts a qualitative approach and emphasises the empirical context of facilities management services. Facilities management...... to maximise the potential of interactions. Moreover, service organisations should evaluate how each set of stakeholders should be involved in different types of innovation processes, and manage interactions through change and expectation management........ Within the service context, specifically, empirical evidence and existing research suggest that interactions between stakeholders are an important element of innovation processes. Therefore, when managing and studying innovation in the service context, interactions between stakeholders should be taken...

  17. Situation analysis in the field of control and management of uranium tailings in Kyrgyzstan

    International Nuclear Information System (INIS)

    Tolongutov, B.

    2012-01-01

    This article is devoted to situation analysis in the field of control and management of uranium tailings in Kyrgyzstan. The basic sites for control in Kyrgyzstan are: HMP P C 'KGRK', specialized on uranium oxide production (status operating) RSH; storage for low-activity waste (tailings and rock piles) former uranium industry; site for disposal of ionizing radiation sources and radioactive waste in Bishkek city; ionizing radiation sources; medical institutions (X-rays diagnostics, radiotherapy); natural anomaly (local sites with high radiation background). It was concluded that: in existing legislative basis there is a necessity to amend requirements for accepting regulatory provisions on radiation safety; it is necessary to continue working on combination of country's policy and strategy with Fundamental Safety Principles and with International instruments, agreements, codes which were ratified by State; legislative basis documental hierarchy on radiation safety issues is not a complete system, significant number of gaps are defined (more than 60 % from the whole system), basically, related to low stages of hierarchical structure (rules, norms, regulations, instructions and etc.); it is necessary to review existing leading documents with the purpose of inaccuracy correcting, especially in the field of safety statements (especially, it relates to new basic regulation on radiation safety, where contradicting to each other criteria are available, mixing to one 'pile' the concepts of 'dose threshold' and 'dose limits', incomplete and scrappy Radioactive Wastes classification, absence of instructions on ionizing radiation sources categorization and etc.

  18. ESCO as Innovative Facilities Management in Danish Municipalities

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole; Oesten, Pimmie; Balslev Nielsen, Susanne

     Purpose:  Increasing energy efficiency of existing buildings is high on the Facility Management (FM) agenda, therefore building owners and FM Managers need insight into a variety of organizational possibilities for energy renovation projects. This paper explores how ESCO can foster innovative....... It is the first publication from the project "Energy Service Concepts" carried out at the Danish Centre for Facilities Management (www.cfm.dtu.dk). Results have not been published before....

  19. Facilities Management and Value Adding - The LEGO case

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Katchamart, Akarapong

    on a case study of LEGO. Results: The study shows that the management model for FM creates a relevant starting point but also that stakeholder and relationship management is an essential aspect of Value Adding Management. The case study confirms the relevance of the basic concept and provides an important......Purpose: To investigate how Facilities Management (FM) can add value and develop a management concept that can assist facilities managers in implementing value adding strategies and practices. Background: Earlier research has shown an increased focus on added value of FM and a FM Value Map has been...... developed to analyse and demonstrate the different ways FM can add value. However, there is a need to develop management tools that can be used more directly and proactively by facilities managers to implement adding value strategies and practices. Approach: The development of the concept is based...

  20. State Wildlife Management Area Public Facilities - points

    Data.gov (United States)

    Minnesota Department of Natural Resources — This point theme contains facilities and features for WMAs that are best represented as points. WMAs are part of the Minnesota state recreation system created to...

  1. State Wildlife Management Area Public Facilities - lines

    Data.gov (United States)

    Minnesota Department of Natural Resources — This line theme contains facilities and features for WMAs that are best represented as lines. WMAs are part of the Minnesota state recreation system created to...

  2. The tail wags the dog: managing large telescope construction projects with lagging requirements and creeping scope

    Science.gov (United States)

    Warner, Mark

    2014-08-01

    In a perfect world, large telescopes would be developed and built in logical, sequential order. First, scientific requirements would be agreed upon, vetted, and fully developed. From these, instrument designers would define their own subsystem requirements and specifications, and then flesh out preliminary designs. This in turn would then allow optic designers to specify lens and mirror requirements, which would permit telescope mounts and drives to be designed. Finally, software and safety systems, enclosures and domes, buildings, foundations, and infrastructures would be specified and developed. Unfortunately, the order of most large telescope projects is the opposite of this sequence. We don't live in a perfect world. Scientists usually don't want to commit to operational requirements until late in the design process, instrument designers frequently change and update their designs due to improving filter and camera technologies, and mount and optics engineers seem to live by the words "more" and "better" throughout their own design processes. Amplifying this is the fact that site construction of buildings and domes are usually the earliest critical path items on the schedule, and are often subject to lengthy permitting and environmental processes. These facility and support items therefore must quickly get underway, often before operational requirements are fully considered. Mirrors and mounts also have very long lead times for fabrication, which in turn necessitates that they are specified and purchased early. All of these factors can result in expensive and time-consuming change orders when requirements are finalized and/or shift late in the process. This paper discusses some of these issues encountered on large, multi-year construction projects. It also presents some techniques and ideas to minimize these effects on schedule and cost. Included is a discussion on the role of Interface Control Documents (ICDs), the importance (and danger) of making big

  3. Sectoral innovation system foresight in practice: Nordic facilities management foresight

    DEFF Research Database (Denmark)

    Andersen, Per Dannemand; Dahl Andersen, Allan; Jensen, Per Anker

    2014-01-01

    . The paper originates in a foresight project in the Nordic facilities management sector. The goal of the foresight project was to identify the possible futures of the facilities management sector in the Nordic countries (Denmark, Finland, Norway, and Sweden) and, based on the findings, to establish...... a proposal for a common Nordic facilities management research agenda. The paper finds that three elements of the innovation system literature are of particular interest for the practice of foresight: innovation systems and context dependency, learning and user-producer interactions, and the role of knowledge...

  4. Study on archive management for nuclear facility decommissioning projects

    International Nuclear Information System (INIS)

    Huang Ling; Gong Jing; Luo Ning; Liao Bing; Zhou Hao

    2011-01-01

    This paper introduces the main features and status of the archive management for nuclear facility decommissioning projects, and explores and discusses the countermeasures in its archive management. Taking the practice of the archive management system of a reactor decommissioning project as an example, the paper illustrates the establishment of archive management system for the nuclear facility decommissioning projects. The results show that the development of a systematic archive management principle and system for nuclear decommissioning projects and the construction of project archives for the whole process from the design to the decommissioning by digitalized archive management system are one effective route to improve the complete, accurate and systematic archiving of project documents, to promote the standardization and effectiveness of the archive management and to ensure the traceability of the nuclear facility decommissioning projects. (authors)

  5. Operational performance management of priced facilities

    Science.gov (United States)

    2011-03-01

    The Texas Department of Transportation and its agency partners have implemented various forms of lane management and pricing over the past three decades, including HOV lanes, managed lanes, and toll roads. As more of these complex transportation faci...

  6. Institutional management of core facilities during challenging financial times.

    Science.gov (United States)

    Haley, Rand

    2011-12-01

    The economic downturn is likely to have lasting effects on institutions of higher education, prioritizing proactive institutional leadership and planning. Although by design, core research facilities are more efficient and effective than supporting individual pieces of research equipment, cores can have significant underlying financial requirements and challenges. This paper explores several possible institutional approaches to managing core facilities during challenging financial times.

  7. Information security management system planning for CBRN facilities

    Energy Technology Data Exchange (ETDEWEB)

    Lenaeu, Joseph D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); O' Neil, Lori Ross [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Leitch, Rosalyn M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Glantz, Clifford S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Landine, Guy P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bryant, Janet L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lewis, John [National Nuclear Lab., Workington (United Kingdom); Mathers, Gemma [National Nuclear Lab., Workington (United Kingdom); Rodger, Robert [National Nuclear Lab., Workington (United Kingdom); Johnson, Christopher [National Nuclear Lab., Workington (United Kingdom)

    2015-12-01

    The focus of this document is to provide guidance for the development of information security management system planning documents at chemical, biological, radiological, or nuclear (CBRN) facilities. It describes a risk-based approach for planning information security programs based on the sensitivity of the data developed, processed, communicated, and stored on facility information systems.

  8. Innovation Insights in the Danish Facility Management Sector

    DEFF Research Database (Denmark)

    Scupola, Ada

    Purpose: This paper investigates innovation in the Danish facilities management sector and addresses the following research question: “Do Danish FM organizations innovate and if so what are the major types of innovations in the Danish FM sector?” Background: In the last three decades, Facilities ...

  9. The added value of Facility management in the educational environment

    NARCIS (Netherlands)

    Kok, H.B.; Mobach, M.; Omta, S.W.F.

    2011-01-01

    Purpose – The purpose of this paper is to define the added value of facility management (FM) in general and to develop a typology of facility services based on their added value in the educational environment. Design/methodology/approach – This paper is based on a literature review and first

  10. The ORNL Surplus Facilities Management Program Long Range Plan

    Energy Technology Data Exchange (ETDEWEB)

    Myrick, T.E.

    1984-09-01

    The Surplus Facilities Management Program (SFMP) at Oak Ridge National Laboratory (ORNL) is part of the Department of Energy`s (DOE) National SFMP, administered by the Richland Operations Office. This program was established to provide for the management of DOE surplus radioactively contaminated facilities from the end of their operating life until final facility disposition is completed. As part of this program, the ORNL SFMP oversees some 76 individual surplus facilities, ranging in complexity from abandoned waste storage tanks to large experimental reactors. The ORNL SFMP has prepared this Long Range Plan to outline the long-term management strategy for those facilities included in the program. The primary objective of this plan are to: (1) develop a base of information for each ORNL SFMP facility, (2) conduct preliminary decommissioning analyses to identify feasible alternatives, (3) assess the current and future risk of each facility, (4) establish a priority list for the decommissioning projects, and (5) integrate the individual project costs and schedules into an overall program schedule and cost estimate for the ORNL site. The Long Range Plan also provides an overview of the ORNL SFMP management structure, specifies the decommissioning criteria to be employed, and identifies special technical problems, research and development needs, and special facilities and equipment that may be required for decommissioning operations.

  11. Facilities Management via Computer: Information at Your Fingertips.

    Science.gov (United States)

    Hensey, Susan

    1996-01-01

    Computer-aided facilities management is a software program consisting of a relational database of facility information--such as occupancy, usage, student counts, etc.--attached to or merged with computerized floor plans. This program can integrate data with drawings, thereby allowing the development of "what if" scenarios. (MLF)

  12. Grout Treatment Facility Land Disposal Restriction Management Plan

    International Nuclear Information System (INIS)

    Hendrickson, D.W.

    1991-01-01

    This document establishes management plans directed to result in the land disposal of grouted wastes at the Hanford Grout Facilities in compliance with Federal, State of Washington, and Department of Energy land disposal restrictions. 9 refs., 1 fig

  13. Drainage facility management system : final report, June 2009.

    Science.gov (United States)

    2009-06-01

    This research project identified requirements for a drainage facility management system for the Oregon Department of Transportation. It also estimated the personnel resources needed to collect the inventory to populate such a system with data. A tota...

  14. Effective and Innovative Practices for Stronger Facilities Management.

    Science.gov (United States)

    Banick, Sarah

    2002-01-01

    Describes the five winners of the APPA's Effective & Innovative Practices Award. These facilities management programs and processes were recognized for enhancing service delivery, lowering costs, increasing productivity, improving customer service, generating revenue, or otherwise benefiting the educational institution. (EV)

  15. Executive Management Requirements Analysis for the Integrated Facilities System

    Science.gov (United States)

    facilities management information at the Chief of Staff, Secretariat, and Office of the Secretary of Defense levels were identified and a selection was made of those that are recommended for inclusion in the IFS data base.

  16. Army Facilities Management: A New Strategy for a New Environment

    Science.gov (United States)

    1990-01-01

    the private sector and the DoD. Army’s regulations and guidance governing facilities management are not in harmony with the DoD’s general policy of decentralizing as much responsibility and authority as possible.

  17. Planning and Managing School Facilities for Agriculture

    Science.gov (United States)

    Staller, Bernie

    1976-01-01

    The Agribusiness Department at Janesville Parker Senior High in Wisconsin involves 360 students and three instructors in three different buildings. Facilities were provided through a variety of methods with major emphasis on utilizing the urban setting. Future Farmers of America students operate projects in orchards, greenhouse, gardens, and…

  18. [Managing the cold chain in healthcare facilities].

    Science.gov (United States)

    Royer, Mathilde; Breton Marchand, Justine; Pons, David

    2017-11-01

    The storage of temperature-sensitive healthcare products requires control of the cold chain. Healthcare facilities must have the appropriate equipment at their disposal and ensure the traceability and monitoring of temperatures. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  19. Can managers compensate for coyote predation of white-tailed deer?

    Science.gov (United States)

    Robinson, Kelly F.; Diefenbach, Duane R.; Fuller, Angela K.; Hurst, Jeremy E.; Rosenberry, Christopher S.

    2014-01-01

    Many studies have documented that coyotes (Canis latrans) are the greatest source of natural mortality for white-tailed deer (Odocoileus virginianus) neonates (<3 months old). With the range expansion of coyotes eastward in North America, many stakeholders are concerned that coyote predation may be affecting deer populations adversely. We hypothesized that declines in neonate survival, perhaps caused by increasing coyote predation, could be offset by adjusting or eliminating antlerless harvest allocations. We used a stochastic, age-based population simulation model to evaluate combinations of low neonate survival rates, severe winters, and low adult deer survival rates to determine the effectiveness of reduced antlerless harvest at stabilizing deer populations. We found that even in regions with high winter mortality, reduced antlerless harvest rates could stabilize deer populations with recruitment and survival rates reported in the literature. When neonate survival rates were low (25%) and yearling and adult female survival rates were reduced by 10%, elimination of antlerless harvests failed to stabilize populations. Our results suggest increased deer mortality from coyotes can be addressed through reduced hunting harvest of adult female deer in most circumstances throughout eastern North America. However, specific knowledge of adult female survival rates is important for making management decisions in areas where both neonate and adult survival may be affected by predation and other mortality factors.

  20. Landscape genetic structure of coastal tailed frogs (Ascaphus truei) in protected vs. managed forests.

    Science.gov (United States)

    Spear, Stephen F; Storfer, Andrew

    2008-11-01

    Habitat loss and fragmentation are the leading causes of species' declines and extinctions. A key component of studying population response to habitat alteration is to understand how fragmentation affects population connectivity in disturbed landscapes. We used landscape genetic analyses to determine how habitat fragmentation due to timber harvest affects genetic population connectivity of the coastal tailed frog (Ascaphus truei), a forest-dwelling, stream-breeding amphibian. We compared rates of gene flow across old-growth (Olympic National Park) and logged landscapes (Olympic National Forest) and used spatial autoregression to estimate the effect of landscape variables on genetic structure. We detected higher overall genetic connectivity across the managed forest, although this was likely a historical signature of continuous forest before timber harvest began. Gene flow also occurred terrestrially, as connectivity was high across unconnected river basins. Autoregressive models demonstrated that closed forest and low solar radiation were correlated with increased gene flow. In addition, there was evidence for a temporal lag in the correlation of decreased gene flow with harvest, suggesting that the full genetic impact may not appear for several generations. Furthermore, we detected genetic evidence of population bottlenecks across the Olympic National Forest, including at sites that were within old-growth forest but surrounded by harvested patches. Collectively, this research suggests that absence of forest (whether due to natural or anthropogenic changes) is a key restrictor of genetic connectivity and that intact forested patches in the surrounding environment are necessary for continued gene flow and population connectivity.

  1. Analyse des Nutzens des Facility Managements bzw. einer Facility Management Abteilung am Beispiel Österreich

    Directory of Open Access Journals (Sweden)

    Redlein, Alexander

    2018-01-01

    Full Text Available Facility Management (FM stellt eine wichtige Managementstrategie für Unternehmen dar. Das die Einführung von FM Nutzenpotenziale eröffnen kann, ist weitestgehend unumstritten. Eine besondere Herausforderung stellt es allerdings dar, den Nutzen von FM greifbar bzw. messbar zu machen. Empirische Erhebungen weisen darauf hin, dass durch den Einsatz von FM-Instrumenten z.B. Einsparungseffekte bei Flächen, Kosten und Zeiten sowie Zeiteffekte durch die Bündelung von Aufgaben und Vermeidung von Datenredundanzen möglich und realistisch sind. Ein quantifizierbarer Nutzennachweis durch den Einsatz von FM wird allerdings nur in wenigen Fällen publiziert und die zumeist dargestellten Pauschalangaben sind kritisch zu hinterfragen. Aus diesem Grund beschäftigt sich die FM-Forschung mit der Erarbeitung von Modellen, um den Nutzen von FM deutlicher herauszuarbeiten. Das Immobilien und Facility Management (IFM der Technischen Universität Wien (TU Wien führt seit 2005 jährlich Studien zu Darstellung der Wirtschaftlichkeit von FM durch. Wichtige Ergebnisse konnten aufgrund der bisher durchgeführten Studien und Analysen bereits abgeleitet werden. So kam etwa die Studie von Susanne Hauk aus dem Jahr 2006 zu dem Schluss, „…dass FM trotz hoher Einführungskosten wesentlich zu einer wirtschaftlicheren und effizienteren Verwaltung von Immobilien beitragen kann“. Dies konnte auch entsprechend empirisch hinterlegt werden. Im Rahmen der vorliegenden Abhandlung soll nun, nach einer kurzen Darstellung der aktuellen Studie, der Schwerpunkt auf der statistischen Analyse und der Erarbeitung statistischer Modelle, zur Darstellung des Nutzens von FM bzw. einer FM-Abteilung liegen. Dabei sollen die wichtigsten Parameter und Einflussfaktoren, die diesen Nutzen beeinflussen, identifiziert werden.

  2. Assessment of facilities management process capability: a NHS facilities case study.

    Science.gov (United States)

    Amaratunga, Dilanthi; Haigh, Richard; Sarshar, Marjan; Baldry, David

    2002-01-01

    Describes a process to assess facilities management (FM) process capabilities: the structured process improvement for construction environments--facilities management (SPICE FM) approach. The SPICE FM framework is a method that FM organizations can use to monitor continuously and subsequently improve their performance. The SPICE FM framework is being tested in a series of case studies to ensure that its outputs are appropriate to the FM sector and of value in the real world. Documents the outcomes of a study undertaken at a facilities directorate of a healthcare NHS trust, in searching its applicability within the NHS. Further describes the study methodology and the key activities undertaken and reviews the key communication and management processes that are in place to support the implementation of the strategic FM objectives within the specific NHS facilities directorate.

  3. Innovation characteristics and intention to adopt sustainable facilities management practices.

    Science.gov (United States)

    Lee, So Young; Kang, Mihyun

    2013-01-01

    Sustainable facilities management (SFM) is important because typical buildings consume more resources and energy than necessary, negatively impact the environment and generate lots of waste (US Department of Energy, 2003, Green Buildings). This study examined innovation characteristics that relate to facility managers' intention to adopt SFM practices. Based on the diffusion of innovations theory (Rogers 1962, 1995, Diffusion of Innovations. 4th ed. New York: The Free Press), an SFM innovation and adoption model was proposed. A survey was conducted with a convenience sample of 240 public facilities managers in 25 facilities management divisions in Seoul, Korea, and its metropolitan areas. Structural equation modelling was employed to analyse the data. The results showed that economic advantage and human comfort aspects are predictors for the intention of SFM adoption. Observability is positively relevant to the intention of SFM adoption. Complexity, however, is not a significant predictor for the intention of SFM adoption. Practical implications for sustainable products and systems and the built environment are suggested. To incorporate an innovation like sustainable practices, it is required to meet the needs of potential adopters. Innovation characteristics that influence facility managers' intention to adopt sustainable facilities management were examined. A survey was conducted. Economic advantage, human comfort and observability are predictors for the intention of adoption of sustainable practice.

  4. A review of sustainable facilities management knowledge and practice

    Directory of Open Access Journals (Sweden)

    Baaki Timothy Kurannen

    2016-01-01

    Full Text Available Sustainability is seen as a far-reaching issue now, and one which the facilities management [FM] profession cannot overlook. This paper explores current sustainable facilities management [SFM] knowledge and practice with specific focus on performance as part of a research focus toward proposing a sustainable FM performance management framework for sustainable healthcare waste management in Malaysia. This paper utilized a review of extant literature on the subject of SFM, FM performance and FM development in Malaysia as source of information. Findings reflect the increasing recognition of the need for the strategic FM function, and how facilities managers are best positioned to drive organizations’ sustainability agendas. In Malaysian context, this recognition is barely evident as findings show FM practice is still immature and predominantly operational. Unlike developed FM markets, FM relevance in Malaysia is being driven by the public sector. Also findings show a disharmony between organizations’ sustainability priority areas and the responsibilities for facilities managers to execute them where the sustainability policy of organizations prioritize one FM service and the facilities managers’ responsibilities prioritize another. As most of SFM implementation is driven by legislation this seems to strengthen the position that, organizations continue to view support services as non-value-adding, as unavoidable liabilities. The implication of this is the pressure on the FM function to continually express its strategic relevance to organizations by tangible value-adding performance output. This creates a new perspective to measuring and managing facilities performance. This paper therefore elevates the importance of FM performance management in SFM context taking into account the peculiar position of the facilities manager. This is seen as a way forward for FM to better express its value to the organization

  5. Westinghouse Hanford Company risk management strategy for retired surplus facilities

    International Nuclear Information System (INIS)

    Taylor, W.E.; Coles, G.A.; Shultz, M.V.; Egge, R.G.

    1993-09-01

    This paper describes an approach that facilitates management of personnel safety and environmental release risk from retired, surplus Westinghouse Hanford Company-managed facilities during the predemolition time frame. These facilities are located in the 100 and 200 Areas of the 1,450-km 2 (570-mi 2 ) Hanford Site in Richland, Washington. The production reactors are located in the 100 Area and the chemical separation facilities are located in the 200 Area. This paper also includes a description of the risk evaluation process, shows applicable results, and includes a description of comparison costs for different risk reduction options

  6. Risk management study for the retired Hanford Site facilities

    International Nuclear Information System (INIS)

    Coles, G.A.; Shultz, M.V.; Taylor, W.E.

    1993-04-01

    Risk from retired surplus facilities has always been assumed to be low at the Hanford Site as the facilities are inactive and have few potentials for causing an offsite hazardous material release. However,the fatal accident that occurred in the spring of 1992 in which an employee fell through a deteriorated roof at the 105-F Reactor Building has raised the possibility that retired facilities represent a greater risk than was originally assumed. Therefore, Westinghouse Hanford Company and the US Department of Energy management have determined that facility risk management strategies and programmatic plans should be reevaluated to assure risks are identified and appropriate corrective action plans are developed. To evaluate risk management strategies, accurate risk information about the current and projected condition of the facilities must be developed. This work procedure has been created to address the development of accurate and timely risk information. By using the evaluation results in this procedure, it will be possible to create a prioritized baseline for managing facility risk until all retired surplus facilities are demolished

  7. Management system for nuclear facilities and activities

    International Nuclear Information System (INIS)

    Kyei, Afrifa Yamoah

    2015-02-01

    A management system is set of procedures an organization need to order to meet its objectives. A management system is the framework of processes and procedures used to ensure that an organization can fufil all tasks require to achieve its objectives. A good efficiency of this system ensures proper safety culture in an organization. The aim of this project is to provide guidance for establishing, implementing, assessing and continually improving a management system that integrates safety, health, environmental, security, quality and economic elements, in order to meet the requirements established by the IAEA. Due to the number of nuclear and radiological accidents occurring over years. It is therefore necessary to have proper management systems to manage the situation. The management system shall be applicable to operators of nuclear reactors, activities using sources of ionizing radiation, radioactive waste management, the transport of radioactive material, radiation protection activities and any other practices or circumstances in which people may exposed to radiation from naturally occurring of artificial sources. An intergrated management system shall be employed to intergrate all of the organization's system and processes into one complete framework, to enable the organization to work as a single and with artificial objectives. (au)

  8. Facilities Management: A Manual for Plant Administration.

    Science.gov (United States)

    Evans, Teresa Burnau, Ed.

    Major aspects of the management of the physical plant of campuses are considered in 42 chapters. The five major sections cover: personnel services; budgeting and accounting; maintenance management; plant operations; and planning, design, and construction. A conclusion describes proven methods and criteria for self-evaluation of the physical plant.…

  9. Alternative management techniques for the uranium mill tailings site at Salt Lake City, UT

    International Nuclear Information System (INIS)

    Rogers, V.C.; Goldsmith, W.A.; Haywood, F.F.; Gantner, G.K.

    1976-01-01

    The concentrations of 226 Ra and other uranium-chain radionuclides present in tailings piles at uranium-milling sites are on the order of 10 3 times higher than those usually found in soil-surface minerals. The public radiation exposure attributable to these sites is primarily due to inhalation of 222 Rn progeny. This paper presents the radiological assessment of the uranium-milling site at Salt Lake City, Utah. Adverse health effects are estimated from present and projected public radiation exposures. Three alternative remedial action measures can be used to reduce radiation exposures: (1) decontamination of offsite areas contaminated by tailings materials; (2) covering the tailings with contamination-free material; and (3) removal of the tailings to a more remote location. These three measures are examined in terms of costs incurred and serious health effects avoided

  10. Uncertainty in age-specific harvest estimates and consequences for white-tailed deer management

    Science.gov (United States)

    Collier, B.A.; Krementz, D.G.

    2007-01-01

    Age structure proportions (proportion of harvested individuals within each age class) are commonly used as support for regulatory restrictions and input for deer population models. Such use requires critical evaluation when harvest regulations force hunters to selectively harvest specific age classes, due to impact on the underlying population age structure. We used a stochastic population simulation model to evaluate the impact of using harvest proportions to evaluate changes in population age structure under a selective harvest management program at two scales. Using harvest proportions to parameterize the age-specific harvest segment of the model for the local scale showed that predictions of post-harvest age structure did not vary dependent upon whether selective harvest criteria were in use or not. At the county scale, yearling frequency in the post-harvest population increased, but model predictions indicated that post-harvest population size of 2.5 years old males would decline below levels found before implementation of the antler restriction, reducing the number of individuals recruited into older age classes. Across the range of age-specific harvest rates modeled, our simulation predicted that underestimation of age-specific harvest rates has considerable influence on predictions of post-harvest population age structure. We found that the consequence of uncertainty in harvest rates corresponds to uncertainty in predictions of residual population structure, and this correspondence is proportional to scale. Our simulations also indicate that regardless of use of harvest proportions or harvest rates, at either the local or county scale the modeled SHC had a high probability (>0.60 and >0.75, respectively) of eliminating recruitment into >2.5 years old age classes. Although frequently used to increase population age structure, our modeling indicated that selective harvest criteria can decrease or eliminate the number of white-tailed deer recruited into older

  11. Facilities Management Practices in Malaysia: A Literature Review

    Directory of Open Access Journals (Sweden)

    Isa Nordiana Mohd

    2016-01-01

    Full Text Available Facilities management in Malaysia has been practiced for decades. The development of its formal practice parallels the improvement of the built environment in the nation. Involvement of the public and private sectors teaming up in arranging the National Asset and Facilities Management (NAFAM in demonstrates the vital collaboration in the facilities management area in Malaysia. Facilities management is seen distinctively as indicated by diverse geographical locations, interests and schools of thought. Facilities management is delegated a service-based industry which gives proficient counsel and administration of clients’ building facilities including residential, commercial, industrial, airports terminals and offices. The aim of this paper is to review the gaps that exist, especially on how FM is being practice in comparison with the published FM body of knowledge. Very relying upon literature, this paper discovered a gap that is an unclear description of current FM applications. This research aims to give new bits of knowledge to upgrade comprehension of FM execution in Malaysia.

  12. Management of tritium at nuclear facilities

    International Nuclear Information System (INIS)

    1984-01-01

    This report presents extending summaries of the works of the participants to an IAEA co-ordinated research programme, ''Handling Tritium - bearing effluents and wastes''. The subjects covered include production of tritium in nuclear power plants (mainly heavy water and light water reactors), as well as at reprocessing plants; removal and enrichment of tritium at nuclear facilities; conditioning methods and characteristics of immobilized tritium of low and high concentration; some potential methods of storage and disposal of tritium. In addition to the conclusions of this three-years work, possible activities in the field are recommended

  13. 41 CFR 102-74.15 - What are the facility management responsibilities of occupant agencies?

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What are the facility management responsibilities of occupant agencies? 102-74.15 Section 102-74.15 Public Contracts and Property... PROPERTY 74-FACILITY MANAGEMENT Facility Management § 102-74.15 What are the facility management...

  14. Transuranic waste management program and facilities

    International Nuclear Information System (INIS)

    Clements, T.L. Jr.; Cook, L.A.; Stallman, R.M.; Hunter, E.K.

    1986-01-01

    Since 1954, defense-generated transuranic (TRU) waste has been received at the Radioactive Waste Management Complex (RWMC) at the Idaho National Engineering Laboratory (INEL). Prior to 1970, approximately 2.2 million cubic feet of transuranic waste were buried in shallow-land trenches and pits at the RWMC. Since 1970, an additional 2.1 million cubic feet of waste have been retrievably stored in aboveground engineered confinement. A major objective of the Department of Energy (DOE) Nuclear Waste Management Program is the proper management of defense-generated transuranic waste. Strategies have been developed for managing INEL stored and buried transuranic waste. These strategies have been incorporated in the Defense Waste Management Plan and are currently being implemented with logistical coordination of transportation systems and schedules for the Waste Isolation Pilot Plant (WIPP). The Stored Waste Examination Pilot Plant (SWEPP) is providing nondestructive examination and assay of retrievably stored, contact-handled TRU waste. Construction of the Process Experimental Pilot Plant (PREPP) was recently completed, and PREPP is currently undergoing system checkout. The PRFPP will provide processing capabilities for contact-handled waste not meeting WIPP-Waste Acceptance Criteria (WAC). In addition, ongoing studies and technology development efforts for managing the TRU waste such as remote-handled and buried TRU waste, are being conducted

  15. 2005 dossier: clay. Tome: architecture and management of the geologic disposal facility

    International Nuclear Information System (INIS)

    2005-01-01

    This document makes a status of the researches carried out by the French national agency of radioactive wastes (ANDRA) about the design of a geologic disposal facility for high-level and long-lived radioactive wastes in argilite formations. Content: 1 - approach of the study: goal, main steps of the design study, iterative approach, content; 2 - general description: high-level and long-lived radioactive wastes, purposes of a reversible disposal, geologic context of the Meuse/Haute-Marne site - the Callovo-Oxfordian formation, design principles of the disposal facility architecture, role of the different disposal components; 3 - high-level and long-lived wastes: production scenarios, description of primary containers, inventory model, hypotheses about receipt fluxes of primary containers; 4- disposal containers: B-type waste containers, C-type waste containers, spent fuel disposal containers; 5 - disposal modules: B-type waste disposal modules, C-type waste disposal modules, spent-fuel disposal modules; 6 - overall underground architecture: main safety questions, overall design, dimensioning factors, construction logic and overall exploitation of the facility, dimensioning of galleries, underground architecture adaptation to different scenarios; 7 - boreholes and galleries: general needs, design principles retained, boreholes description, galleries description, building up of boreholes and galleries, durability of facilities, backfilling and sealing up of boreholes and galleries; 8 - surface facilities: general organization, nuclear area, industrial and administrative area, tailings area; 9 - nuclear exploitation means of the facility: receipt of primary containers and preparation of disposal containers, transfer of disposal containers from the surface to the disposal alveoles, setting up of containers inside alveoles; 10 - reversible management of the disposal: step by step disposal process, mastery of disposal behaviour and action capacity, observation and

  16. Best practices for managing large CryoEM facilities.

    Science.gov (United States)

    Alewijnse, Bart; Ashton, Alun W; Chambers, Melissa G; Chen, Songye; Cheng, Anchi; Ebrahim, Mark; Eng, Edward T; Hagen, Wim J H; Koster, Abraham J; López, Claudia S; Lukoyanova, Natalya; Ortega, Joaquin; Renault, Ludovic; Reyntjens, Steve; Rice, William J; Scapin, Giovanna; Schrijver, Raymond; Siebert, Alistair; Stagg, Scott M; Grum-Tokars, Valerie; Wright, Elizabeth R; Wu, Shenping; Yu, Zhiheng; Zhou, Z Hong; Carragher, Bridget; Potter, Clinton S

    2017-09-01

    This paper provides an overview of the discussion and presentations from the Workshop on the Management of Large CryoEM Facilities held at the New York Structural Biology Center, New York, NY on February 6-7, 2017. A major objective of the workshop was to discuss best practices for managing cryoEM facilities. The discussions were largely focused on supporting single-particle methods for cryoEM and topics included: user access, assessing projects, workflow, sample handling, microscopy, data management and processing, and user training. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

  17. Decommissioning of nuclear facilities: Decontamination, disassembly and waste management

    International Nuclear Information System (INIS)

    1983-01-01

    The term 'decommissioning', as used within the nuclear industry, means the actions taken at the end of a facility's useful life to retire the facility from service in a manner that provides adequate protection for the health and safety of the decommissioning workers, the general public, and for the environment. These actions can range from merely closing down the facility and a minimal removal of radioactive material coupled with continuing maintenance and surveillance, to a complete removal of residual radioactivity in excess of levels acceptable for unrestricted use of the facility and its site. This latter condition, unrestricted use, is the ultimate goal of all decommissioning actions at retired nuclear facilities. The purpose of this report is to provide an information base on the considerations important to decommissioning, the methods available for decontamination and disassembly of a nuclear facility, the management of the resulting radioactive wastes, and the areas of decommissioning methodology where improvements might be made. Specific sections are devoted to each of these topics, and conclusions are presented concerning the present status of each topic. A summary of past decommissioning experience in Member States is presented in the Appendix. The report, with its discussions of necessary considerations, available operational methods, and waste management practices, together with supporting references, provides an appreciation of the activities that comprise decommissioning of nuclear facilities. It is anticipated that the information presented in the report should prove useful to persons concerned with the development of plans for the decommissioning of retired nuclear facilities

  18. Facility information management system; Shisetsu joho kanri system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-01-10

    A facility management system (FMS) was developed as a tool for efficiently operating and managing building facilities and related equipment. The maintenance management data is designed to be collected through automatic formation of data base by using a work flow function and releasing the daily business from paper work. The data base thus formed can be retrieved and displayed by utilizing a network system. The plan view for construction facilities is made a minute plan comparable to the ground plan by taking in DXF type drawing data such as a completion drawing, making it a colored display for example to create an intuitive expression understandable at first sight. The plan is controlled by the level including equipment classification and is capable of superimposed display. Detailed management data is displayed by mouse clicking of registered icons, allowing required information to be readily taken out. (translated by NEDO)

  19. Radiation risk management at DOE accelerator facilities

    International Nuclear Information System (INIS)

    Dyck, O.B. van.

    1997-01-01

    The DOE accelerator contractors have been discussing among themselves and with the Department how to improve radiation safety risk management. This activity-how to assure prevention of unplanned high exposures-is separate from normal exposure management, which historically has been quite successful. The ad-hoc Committee on the Accelerator Safety Order and Guidance [CASOG], formed by the Accelerator Section of the HPS, has proposed a risk- based approach, which will be discussed. Concepts involved are risk quantification and comparison (including with non-radiation risk), passive and active (reacting) protection systems, and probabilistic analysis. Different models of risk management will be presented, and the changing regulatory environment will also be discussed

  20. Radiological safety management in medical cyclotron facilities

    International Nuclear Information System (INIS)

    Senthilkumar, M.; Nagalakshmi, B.; Manisha, V.I.; Pushpangadan, K.D.; Agarwal, S.P.

    2005-01-01

    A new era of Nuclear Medicine diagnosis has started with Medical Cyclotron technology. Medical Cyclotron produces positron emitters, which can be used in molecular imaging of the organs. In Medical Cyclotron, particles such as protons, deuterons are accelerated and made to bombard with suitable target material to produce radioisotopes, which are positron emitters. The positron emitters are produced by the (p,α), (p,n) or (d,n) reaction. The neutron activation of the surrounding medium draws the major attention in radiation safety. The license for such medical cyclotron facilities is issued by Atomic Energy Regulatory Board in India on the basis of regulations drawn from Radiation Protection Rules 1971 promulgated by Govt. of India under Atomic Energy Act, 1962. In this paper, the following aspects i) the steps involved in cyclotron installation ii) Design, Operational specifications and other features of various medical cyclotrons iii) Regulatory requirements for a cyclotron installation have been discussed

  1. Time-Management Planning for Educational Facilities.

    Science.gov (United States)

    McIsaac, Donald N.; And Others

    Three conference papers concerned with systems analysis and time management planning. One paper is concerned with techniques, especially the application of the "critical path method" or PERT (Program Evaluation Review Technique) in planning construction activities. A second paper concerns problems associated with collecting and communicating…

  2. Managing LLRW from decommissioning of nuclear facilities - a Canadian perspective

    International Nuclear Information System (INIS)

    Donders, R.E.; De, P.L.

    1994-03-01

    In Canada, considerable experience has been gained recently in decommissioning nuclear facilities and managing the resulting waste. This experience has raised important issues from both the decommissioning and waste management perspectives. This paper focuses on the waste management aspects of decommissioning. Past experience is reviewed, preliminary estimates of waste volumes and characteristics are provided, and the major technical and regulatory issues are discussed. (author). 5 refs., 1 tab., 2 figs

  3. The Mixed Waste Management Facility. Preliminary design review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    This document presents information about the Mixed Waste Management Facility. Topics discussed include: cost and schedule baseline for the completion of the project; evaluation of alternative options; transportation of radioactive wastes to the facility; capital risk associated with incineration; radioactive waste processing; scaling of the pilot-scale system; waste streams to be processed; molten salt oxidation; feed preparation; initial operation to demonstrate selected technologies; floorplans; baseline revisions; preliminary design baseline; cost reduction; and project mission and milestones.

  4. The Mixed Waste Management Facility. Preliminary design review

    International Nuclear Information System (INIS)

    1995-01-01

    This document presents information about the Mixed Waste Management Facility. Topics discussed include: cost and schedule baseline for the completion of the project; evaluation of alternative options; transportation of radioactive wastes to the facility; capital risk associated with incineration; radioactive waste processing; scaling of the pilot-scale system; waste streams to be processed; molten salt oxidation; feed preparation; initial operation to demonstrate selected technologies; floorplans; baseline revisions; preliminary design baseline; cost reduction; and project mission and milestones

  5. Safety evaluation for regulatory management of Australian radioisotope production facilities.

    Science.gov (United States)

    Sarkar, S

    2009-01-01

    This paper describes the approach of Australian Radiation Protection and Nuclear Safety Agency (ARPANSA) in the regulatory management of Radioisotope Production facilities in Australia. ARPANSA is the regulatory authority for commonwealth entities operating nuclear installations including Radioisotope Production facilities. In assessing the application for operating nuclear installations the ARPANSA assessors prepare a Safety Evaluation Report, which is a recommendation to the Chief Executive Officer (CEO) of ARPANSA whether to issue a licence to site, construct, operate and decommission facilities. In particular, the CEO must take into account international best practice in radiation protection and nuclear safety when making licence decisions.

  6. Mixed Waste Management Facility closure at the Savannah River Site

    International Nuclear Information System (INIS)

    Bittner, M.F.

    1991-08-01

    The Mixed Waste Management Facility of the Savannah River Plant received hazardous and solid low level radioactive wastes from 1972 until 1986. Because this facility did not have a permit to receive hazardous wastes, a Resource Conservation and Recovery Act closure was performed between 1987 and 1990. This closure consisted of dynamic compaction of the waste trenches and placement of a 3-foot clay cap, a 2-foot soil cover, and a vegetative layer. Operations of the waste disposal facility, tests performed to complete the closure design, and the construction of the closure cap are discussed herein

  7. Husbandry protocols for the Band-tailed pigeon, Patagioenas fasciata albilinea, at the WCS, Bronx Zoo for future conservation management programs.

    Science.gov (United States)

    Oehler, David A; Novak, Ben J; Schmid, Susan C; Huth, Ken J; Totha, Aniko I; Audhya, Tapan

    2018-01-01

    From 2015 to 2016 we determined the husbandry protocols involved in the captive rearing of the Band-tailed Pigeon (BTPI), Patagioenas fascinate albilinea, for use as a tool in the future management of like extant and extinct avian taxa. Current and historical ex-situ conservation management of BTPIs and the closely related Passenger Pigeon, Ectopistes migratorius, is limited in scope and required further examination. Focus on the BTPI within zoos and private aviculture facilities is currently lacking. New pressures on the wild populations and future examination of the parameters involved in the possible restoration of the Passenger Pigeon may rely on a complete understanding of these conservation management techniques. Here we report on the establishment of a colony of BTPIs, at the Wildlife Conservation Society (WCS), and detail the progress attained. A confiscated group of BTPIs was presented to WCS and allowed us to set up the colony, document the husbandry involved, and monitor neonatal development and the factors that influence that development. The information has provided a better understanding of the BTPI and has implications for the future conservation management of this and like species. © 2017 Wiley Periodicals, Inc.

  8. Knowledge management and information tools for building maintenance and facility management

    CERN Document Server

    Talamo, Cinzia

    2015-01-01

    This book describes the latest methods and tools for the management of information within facility management services and explains how it is possible to collect, organize, and use information over the life cycle of a building in order to optimize the integration of these services and improve the efficiency of processes. The coverage includes presentation and analysis of basic concepts, procedures, and international standards in the development and management of real estate inventories, building registries, and information systems for facility management. Models of strategic management are discussed and the functions and roles of the strategic management center, explained.  Detailed attention is also devoted to building information modeling (BIM) for facility management and potential interactions between information systems and BIM applications. Criteria for evaluating information system performance are identified, and guidelines of value in developing technical specifications for facility management service...

  9. Realising the potential of shared space in facilities management

    DEFF Research Database (Denmark)

    Brinkø, Rikke

    individuals or groups from different organisational contexts, and this PhD investigates the intricate processes con-cerning shared space in a facilities management context. The overall aim is divided in a theoretical and a practical part, with the theoretical focused on contributing with new knowledge...... of shared space, building towards a new method for efficient and sustainable facilities management operation of buildings and properties. The practical part is focused on connecting this new knowledge to practical applications and developing tools that can be used to work with shared spaces in a practice....... Grounded in literature from a variety of fields stretching from facilities management to urban planning and development, this PhD adopts a qualitative approach to the study of the intricate processes in-volved in working in, and with, shared space. The study employs case studies as the method of choice...

  10. Software application for a total management of a radioactive facility

    International Nuclear Information System (INIS)

    Mirpuri, E.; Escudero, R.; Macias, M.T.; Perez, J.; Sanchez, A.; Usera, F.

    2008-01-01

    The use of radiological material and/or equipment that generate ionizing radiation is widely extended in biological research. In every laboratory there are a large variety of methods, operations, techniques, equipment, radioisotopes and users related to the work with ionizing radiation. In order to control the radioactive material, users and the whole facility a large number of documents, databases and information is necessary to be created by the manager of the Radioactivity Facility. This kind of information is characterized by a constant and persistent manipulation and includes information of great importance such as the general management of the radioactive material and waste management, exposed workers vigilance, controlled areas access, laboratory and equipment reservations, radiological inspections, etc. These activities are often complicated by the fact that the main manager of the radioactive facility is also in charge of bio-safety and working prevention issues so the documents to generate and manipulate and the procedures to develop are multiplied. A procedure to access and manage all these files is highly recommended in order to optimize the general management of the facility, avoiding loss of information, automating all the activities and allowing data necessary for control easily accessible. In this work we present a software application for a total management of the facility. This software has been developed by the collaboration of six of the most important research centers from Spain in coordination with the company 'Appize soluciones'. This is a flexible and versatile application that adapts to any specific need of every research center, providing the appropriate reports and checklist that speed up to general management and increase the ease of writing the official documents, including the Operations Book. (author)

  11. 41 CFR 102-74.10 - What is the basic facility management policy?

    Science.gov (United States)

    2010-07-01

    ... facility management policy? 102-74.10 Section 102-74.10 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 74-FACILITY MANAGEMENT General Provisions § 102-74.10 What is the basic facility management policy? Executive agencies...

  12. Construction Management for Conventional Facilities of Proton Accelerator

    International Nuclear Information System (INIS)

    Kim, Jun Yeon; Cho, Jang Hyung; Cho, Sung Won

    2013-01-01

    Proton Engineering Frontier Project, puts its aim to building 100MeV 20mA linear proton accelerator which is national facility for NT, BT, IT, and future technologies, expected to boost up the national industry competitiveness. This R and D, Construction Management is in charge of the supportive works such as site selection, architecture and engineering of conventional facilities, and overall construction management. The major goals of this work are as follows: At first, architecture and engineering of conventional facilities. Second, construction management, supervision and inspection on construction of conventional facilities. Lastly, cooperation with the project host organization, Gyeongju city, for adjusting technically interrelated work during construction. In this research, We completed the basic, detail, and field changed design of conventional facilities. Acquisition of necessary construction and atomic license, radiation safety analysis, site improvement, access road construction were successfully done as well. Also, we participated in the project host related work as follows: Project host organization and site selection, construction technical work for project host organization and procedure management, etc. Consequently, we so fulfilled all of the own goals which were set up in the beginning of this construction project that we could made contribution for installing and running PEFP's developed 100MeV 20mA linear accelerator

  13. Masterplan on facilities management project funded by government contribution

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. C.; Lim, I. C.; Ryu, W. S.; Song, K. S.; Jung, U. S.; Yang, S. D.

    2010-07-15

    {Omicron} Nuclear industry export and future challenges such as securing nuclear system is a source of technical support for the smooth promotion of the pending issues related to the nuclear energy Institute for large facilities and equipment you need to build long-term strategic business operations support system. - The emphasis is on strategy, goals, long-term roadmap and action plan, a plan to support the main strategy challenges {Omicron} Support for Industry and studies, and science facilities management of the users (open) is dedicated to industrial and citizen service provide stewardship function replace aging facilities and the introduction of facilities-of-the-art equipment, such as the establishment of the detailed action plans build roadmap needed - Customer satisfaction enhancement and strengthening the planning, monitoring, infrastructure facilities {Omicron} The main business performance evaluation management appeared at the introduction of goal-based management system for global research competitiveness - The main performance analysis and performance goals strategies, performance indicators, such as appropriateness and performance management in place feedback instruments - Domestic and international technology trends, competitive analysis of a foundation to establish.

  14. Masterplan on facilities management project funded by government contribution

    International Nuclear Information System (INIS)

    Kim, H. C.; Lim, I. C.; Ryu, W. S.; Song, K. S.; Jung, U. S.; Yang, S. D.

    2010-07-01

    Ο Nuclear industry export and future challenges such as securing nuclear system is a source of technical support for the smooth promotion of the pending issues related to the nuclear energy Institute for large facilities and equipment you need to build long-term strategic business operations support system. - The emphasis is on strategy, goals, long-term roadmap and action plan, a plan to support the main strategy challenges Ο Support for Industry and studies, and science facilities management of the users (open) is dedicated to industrial and citizen service provide stewardship function replace aging facilities and the introduction of facilities-of-the-art equipment, such as the establishment of the detailed action plans build roadmap needed - Customer satisfaction enhancement and strengthening the planning, monitoring, infrastructure facilities Ο The main business performance evaluation management appeared at the introduction of goal-based management system for global research competitiveness - The main performance analysis and performance goals strategies, performance indicators, such as appropriateness and performance management in place feedback instruments - Domestic and international technology trends, competitive analysis of a foundation to establish

  15. Delivering Sustainable Facilities Management in Danish Housing Estates

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Jensen, Jesper Ole; Jensen, Per Anker

    2009-01-01

    Housing plays a central role in sustainable development due to large resource consumption and as transition agent towards sustainable lifestyles. The aim is to evaluate current practice of housing administration in Denmark in order to evaluate if and how sustainable facilities management...... is supporting social, economical and environmental sustainable development. Sustainable facility management (SFM) is as an 'umbrella' for various ways of reducing flows of energy, water and waste in the daily operation of the buildings, for instance by regular monitoring the consumption, by using 'green...

  16. Længerevarende samarbejder inden for Facilities Management

    DEFF Research Database (Denmark)

    Storgaard, Kresten; Friis, Freja

    Længerevarende strategiske samarbejde er interessant, fordi det anses for en måde at fremme produktivitet og forretning for både kunder og leverandører. I rapportenfremlægges resultaterne fra en caseanalyse blandt leverandører og købere af Facilities Management.......Længerevarende strategiske samarbejde er interessant, fordi det anses for en måde at fremme produktivitet og forretning for både kunder og leverandører. I rapportenfremlægges resultaterne fra en caseanalyse blandt leverandører og købere af Facilities Management....

  17. Turnback Capacity Assessment and Delay Management at a Rail Transit Terminal with Two-Tail Tracks

    Directory of Open Access Journals (Sweden)

    Zhibin Jiang

    2015-01-01

    Full Text Available Terminal capacity and performance have become a major concern for rail transit agencies in China due to the ever increasing passenger demand. This paper develops a mixed integer programming (MIP optimization model to estimate the turnback capacity and performance of a rail transit terminal with two-tail tracks. The capacity evaluation and delay propagation are described and assessed as an N-track integrated model with minimal time span and train delay. Operations and design parameters such as tail track allocation strategies, maximum layover time, headway pattern, buffer time distribution scheme, and primary delay are also considered in this model. The effectiveness of the model is tested by a case study with computation results drawn from one terminal station in Shanghai, China. The case study results show that unfixed platform time and flexible tail track allocation strategies can improve the capacity of turnback operation, and the strategy of allowing swapping of the tail tracks has a significantly positive impact on delay absorption.

  18. Facilities Management a new strategy at CERN

    CERN Document Server

    Nonis, M; CERN. Geneva. ST Division

    2002-01-01

    Starting from 2002, the management of all the tertiary infrastructure of CERN in charge of ST Division shall be carried out through a single Contractor; this includes both maintenance activities on the buildings and their technical installations, and general services such as security, cleaning, gardening, and waste disposal. At present, all these activities are carried out by external contractors via several different contracts. The major purposes of the unification in one single contract is to transfer the coordination tasks of the contracts thus reducing the direct control operation costs, release internal resources in order to be better focused on the core business of the Division and the reduction of the costs of each activity by taking profit of the synergies among the different services. The authors will thoroughly report on the main aspects related to this new contract, focusing their attention in particular to the result oriented strategy through a Service Level Agreement, the key performance indicato...

  19. Operational experiences and upgradation of waste management facilities Trombay, India

    International Nuclear Information System (INIS)

    Chander, Mahesh; Bodke, S.B.; Bansal, N.K.

    2001-01-01

    Full text: Waste Management Facilities Trombay provide services for the safe management of radioactive wastes generated from the operation of non power sources at Bhabha Atomic Research Centre, India. The paper describes in detail the current operational experience and facility upgradation by way of revamping of existing processes equipment and systems and augmentation of the facility by way of introducing latest processes and technologies to enhance the safety. Radioactive wastes are generated from the operation of research reactors, fuel fabrication, spent fuel reprocessing, research labs. manufacture of sealed sources and labeled compounds. Use of radiation sources in the field of medical, agriculture and industry also leads to generation of assorted solid waste and spent sealed radiation sources which require proper waste management. Waste Management Facilities Trombay comprise of Effluent Treatment Plant (ETP), Decontamination Centre (DC) and Radioactive Solid Waste Management Site (RSMS). Low level radioactive liquid effluents are received at ETP. Plant has 100 M 3 /day treatment capacity. Decontamination of liquid effluents is effected by chemical treatment method using co- precipitation as a process. Plant has 1800 M 3 of storage capacity. Chemical treatment system comprises of clarifloculator, static mixer and chemical feed tanks. Plant has concentrate management facility where chemical sludge is centrifuged to effect volume reduction of more that 15. Thickened sludge is immobilized in cement matrix. Decontamination Centre caters to the need of equipment decontamination from research reactors. Process used is ultrasonic chemical decontamination. Besides this DC provides services for decontamination of protective wears. Radioactive Solid Waste Management Site is responsible for the safe management of solid waste generated at various research reactors, plants, laboratories in Bhabha Atomic Research Centre. Spent sealed radiation sources are also stored

  20. Organization and management for decommissioning of large nuclear facilities

    International Nuclear Information System (INIS)

    2000-01-01

    For nuclear facilities, decommissioning is the final phase in the life-cycle after siting, design, construction, commissioning and operation. It is a complex process involving operations such as detailed surveys, decontamination and dismantling of plant equipment and facilities, demolition of buildings and structures, and management of resulting waste and other materials, whilst taking into account aspects of health and safety of the operating personnel and the general public, and protection of the environment. Careful planning and management is essential to ensure that decommissioning is accomplished in a safe and cost effective manner. Guidance on organizational aspects may lead to better decision making, reductions in time and resources, lower doses to the workers and reduced impact on public health and the environment. The objective of this report is to provide information and guidance on the organization and management aspects for the decommissioning of large nuclear facilities which will be useful for licensees responsible for discharging these responsibilities. The information contained in the report may also be useful to policy makers, regulatory bodies and other organizations interested in the planning and management of decommissioning. In this report, the term 'decommissioning' refers to those actions that are taken at the end of the useful life of a nuclear facility in withdrawing it from service with adequate regard for the health and safety of workers and members of the public and for the protection of the environment. The term 'large nuclear facilities' involves nuclear power plants, large nuclear research reactors and other fuel cycle facilities such as reprocessing plants, fuel conversion, fabrication and enrichment plants, as well as spent fuel storage and waste management plants. Information on the planning and management for decommissioning of smaller research reactors or other small nuclear facilities can be found elsewhere. The report covers

  1. Practices and outcomes: pressure ulcer management in nursing facilities.

    Science.gov (United States)

    Rapp, Mary Pat; Nelson, Francine; Slomka, Jacquelyn; Persson, Diane; Cron, Stanley G; Bergstrom, Nancy

    2010-01-01

    The objective of this study was to compare reported pressure ulcer prevention and treatment practices in nursing facilities with high prevalence of pressure ulcers versus nursing facilities with low prevalence of pressure ulcers. A 26-item survey on implementation of nationally accepted standards for pressure ulcer prevention and treatment was mailed to directors of nursing in all 68 nursing facilities in an urban county. There were no statistically significant differences on reported pressure ulcer prevention interventions based on pressure ulcer prevalence. When treating pressure ulcers, respondents of facilities with high prevalence of pressure ulcers reported more frequent pain assessments, more frequent use of low air-loss beds, and daily wound assessments. The study failed to support the hypothesis that nursing facilities with low prevalence of pressure ulcers report using more guideline-recommended pressure ulcer prevention and treatment interventions than facilities with high prevalence of pressure ulcers. Reported adherence to recommended interventions for repositioning and pressure relief measures, moisture management, and attention to nutrition exceeded 60% in all facilities. The disparity between reported interventions and pressure ulcer prevalence rates offers an opportunity for future collaborative quality improvement projects, research, and the need for leadership to develop systems of care to ensure the use of pressure ulcer prevention guidelines.

  2. Biosecurity Measures in 48 Isolation Facilities Managing Highly Infectious Diseases

    Science.gov (United States)

    Puro, Vincenzo; Schilling, Stefan; Thomson, Gail; De Iaco, Giuseppina; Brouqui, Philippe; Maltezou, Helena C.; Bannister, Barbara; Gottschalk, René; Brodt, Hans-Rheinhard; Ippolito, Giuseppe

    2012-01-01

    Biosecurity measures are traditionally applied to laboratories, but they may also be usefully applied in highly specialized clinical settings, such as the isolation facilities for the management of patients with highly infectious diseases (eg, viral hemorrhagic fevers, SARS, smallpox, potentially severe pandemic flu, and MDR- and XDR-tuberculosis). In 2009 the European Network for Highly Infectious Diseases conducted a survey in 48 isolation facilities in 16 European countries to determine biosecurity measures for access control to the facility. Security personnel are present in 39 facilities (81%). In 35 facilities (73%), entrance to the isolation area is restricted; control methods include electronic keys, a PIN system, closed-circuit TV, and guards at the doors. In 25 facilities (52%), identification and registration of all staff entering and exiting the isolation area are required. Access control is used in most surveyed centers, but specific lacks exist in some facilities. Further data are needed to assess other biosecurity aspects, such as the security measures during the transportation of potentially contaminated materials and measures to address the risk of an “insider attack.” PMID:22571373

  3. INFRASTRUCTURE FACILITIES FOR MONITORING AND INTELLECTUAL ROAD TRAFFIC MANAGEMENT

    Directory of Open Access Journals (Sweden)

    G. Belov

    2014-10-01

    Full Text Available Review of automatic management of road traffic technologies in major cities of Ukraine is carried out in the given article. Priority directions of studies are determined for producing modern and perspective technologies in the given area. The facilities for monitoring and intelligence management of the road traffic on the basis of the programmed logical controller, using the device of fuzzy logic are considered.

  4. 21 CFR 58.31 - Testing facility management.

    Science.gov (United States)

    2010-04-01

    ... deviations from these regulations reported by the quality assurance unit are communicated to the study... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Testing facility management. 58.31 Section 58.31 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL GOOD...

  5. Ureterolithiasis: Management in an Environment with Limited Facilities

    African Journals Online (AJOL)

    2017-05-22

    May 22, 2017 ... Ureterolithiasis: Management in an Environment with Limited Facilities ... ureteric stones in our environment is affected by delay in presentation, low level of .... Middle third. 11. 15.3. Lower one-third (intramural inclusive). 45. 62.5. Figure 4: Modalities of treatment. Figure 5: Percentage composition of 50 ...

  6. Tools for Stakeholder Involvement in Facility Management Service Design

    DEFF Research Database (Denmark)

    Nardelli, Giulia; Scupola, Ada

    Purpose: The purpose of this paper is to provide an overview of the tools that Facility Management (FM) companies use to involve different stakeholders, and more precisely the ones on the demand side, in the FM service design process. Stakeholder involvement may contribute to FM service innovatio...

  7. Facility management progettare, misurare, gestire e remunerare i servizi

    CERN Document Server

    Tronconi, Oliviero

    2014-01-01

    Il valore aggiunto del Facility Management consiste in una nuova dimensione e importanza dell'organizzazione: quella del fornitore che si affianca all'azienda/cliente per supportarla e risolvere qualsiasi problema inerente ai suoi diversi servizi/bisogni. Questo valore deriva da una maggior capacità di coordinamento e gestione del fornitore/partner e da una più elevata motivazione e qualità professionale delle risorse impiegate. Ma il contributo più significativo risiede della capacità di incrementare la qualità delle informazioni e, quindi, la conoscenza sui processi attuati e sui risultati raggiunti. Il Facility Management è, nella sua accezione più evoluta, il passaggio dal "fare artigianale" alla "gestione delle informazioni che sono causa ed effetto del fare". Una gestione sistematica che deve originare un più alto livello di conoscenza dei processi e che costituisce l'essenza, il nucleo fondamentale del Facility Management. Nella chiave di lettura proposta dal volume, il Facility Management è ...

  8. Building a GIS Database for Space and Facilities Management

    Science.gov (United States)

    Valcik, Nicolas A.; Huesca-Dorantes, Patricia

    2003-01-01

    Growth and technology have driven the University of Texas at Dallas (UTD) to build a geographic information system (GIS) database for its facilities and space management. This chapter reviews several issues concerning this implementation: (1) the challenges involved in implementing the system; (2) the lack of efficiency and accuracy that existed…

  9. Nye udbudsformer og partnerskaber inden for Facilities Management

    DEFF Research Database (Denmark)

    Jensen, Per Anker

    2010-01-01

    I de senere år er der sket en stærk udvikling af nye udbuds- og samarbejdsformer inden for Facilities Management (FM). Velkendte eksempler er Offentlig-Private Partnerskaber (OPP ), hvor der sammen med FM-ydelser over typisk 30 år også indgår levering og finansiering af en bygning og ESCO (Energy...

  10. Stocking the Toolbox: Ideas for Successful Facility Management

    Science.gov (United States)

    Gadzikowski, Ann

    2005-01-01

    From snow removal to dishwasher repair, from pest control to playground renovations, there are countless demands on a child care director's time and attention. A child care director is required to juggle a wide variety of roles and expectations related to facility management, often with very little training or expertise in this area. Some child…

  11. Ureterolithiasis: Management in an environment with limited facilities

    African Journals Online (AJOL)

    Background: In the past 2–3 decades, there has been a dramatic development in the techniques of stone removal. This study highlights the management of symptomatic ureteral stones in an environment without such facilities. Materials and Methods: Sixty‑nine patients, comprising 53 (76.8%) males and 16 (23.2%) females ...

  12. Adding Value to Facilities Management with Information Technology

    DEFF Research Database (Denmark)

    Ebbesen, Poul

    2016-01-01

    This PhD project investigates implementation and use of Information Systems (IS) and Information Technologies (IT) in the Facilities management (FM) business domain. This investigation is relevant because implementation and use of IS/IT in FM has potentials for improvements which can provide...

  13. Strategies for healthcare facilities, construction, and real estate management.

    Science.gov (United States)

    Lee, James G

    2012-05-01

    Adventist HealthCare offers the following lessons learned in improving the value of healthcare facilities, construction, and real estate management: Use an integrated approach. Ensure that the objectives of the approach align the hospital or health system's mission and values. Embrace innovation. Develop a plan that applies to the whole organization, rather than specific business units. Ensure commitment of senior leaders.

  14. 20 CFR 638.303 - Site selection and facilities management.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Site selection and facilities management. 638.303 Section 638.303 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR JOB CORPS PROGRAM UNDER TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Funding, Site Selection, and...

  15. 41 CFR 102-72.40 - What are facility management delegations?

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What are facility management delegations? 102-72.40 Section 102-72.40 Public Contracts and Property Management Federal Property... AUTHORITY Delegation of Authority § 102-72.40 What are facility management delegations? Facility management...

  16. Modified Whale's tail technique for the management of bone-defect in anterior teeth.

    Science.gov (United States)

    Kuriakose, Anu; Ambooken, Majo; Jacob, Jayan; John, Priya

    2015-01-01

    The purpose of this case report is to describe the efficacy of a modified Whale's tail technique to achieve primary closure and thereby aid in regeneration of an interdental osseous defect between maxillary central incisors complicated by an aberrant frenal attachment. A healthy 32-year-old female patient reported with the complaint of spacing between her upper front teeth. Clinical examination revealed an aberrant frenum extending into the interdental papilla in relation to the central incisors. There was a 6 mm periodontal pocket in relation to the mesiopalatal aspect of maxillary left central incisor. Intraoral periapical radiograph showed vertical bone loss in relation to mesial aspect of maxillary left central incisor. A modified Whale's tail flap was employed to access the area. The defect was filled with an alloplastic graft. Six months postoperative review showed complete elimination of the pocket along with radiographic bone fill of the defect.

  17. Black-tailed jack rabbit movements and habitat utilization at the Idaho National Engineering Laboratory radioactive waste management complex

    International Nuclear Information System (INIS)

    Grant, J.C.

    1983-01-01

    In June 1982, a study of black-tailed jack rabbit (Lepus californicus) ecology was initiated at the Idaho National Engineering Laboratory Radioactive Waste Management Complex (RWMC). This study will provide data necessary to evaluate the role of jack rabbits in radionuclide transport away from the Subsurface Disposal Area of the RWMC. Primary goals are to document radionuclide concentrations in jack rabbit tissues, and determine population size, movement patterns, habitat use, and food habits of jack rabbits inhabiting the RWMC area. Study design and prelimianry results are discussed

  18. Conceptual development of a test facility for spent fuel management

    International Nuclear Information System (INIS)

    Park, S.W.; Lee, H.H.; Lee, J.Y.; Lee, J.S.; Ro, S.G.

    1997-01-01

    Spent fuel management is an important issue for nuclear power program, requiring careful planning and implementation. With the wait-and-see policy on spent fuel management in Korea, research efforts are directed at KAERI to develop advanced technologies for safer and more efficient management of the accumulating spent fuels. In support of these research perspectives, a test facility of pilot scale is being developed with provisions for integral demonstration of a multitude of technical functions required for spent fuel management. The facility, baptized SMART (Spent fuel MAnagement technology Research and Test facility), is to be capable of handling full size assembly of spent PWR fuel (as well as CANDU fuel) with a maximum capacity of 10 MTU/y (about 24 assemblies of PWR type). Major functions of the facility are consolidation of spent PWR fuel assembly into a half-volume package and optionally transformation of the fuel rod into a fuel of CANDU type (called DUPIC). Objectives of these functions are to demonstrate volume reduction of spent fuel (for either longer-term dry storage or direct disposal ) in the former case and direct refabrication of the spent PWR fuel into CANDU-type DUPIC fuel for reuse in CANDU reactors in the latter case, respectively. In addition to these major functions, there are other associated technologies to be demonstrated : such as waste treatment, remote maintenance, safeguards, etc. As the facility is to demonstrate not only the functional processes but also the safety and efficiency of the test operations, engineering criteria equivalent to industrial standards are incorporated in the design concept. The hot cell structure enclosing the radioactive materials is configured in such way to maximize costs within the given functional and operational requirements. (author). 3 tabs., 4 figs

  19. Guidelines for operator competence - Optimising facility management processes; Leitfaden Betreiberkompetenz. Schritt fuer Schritt Facility Management Prozesse optimieren

    Energy Technology Data Exchange (ETDEWEB)

    Moser, R.

    2005-06-15

    This brochure issued by IFMA (International Facility Management Association) Switzerland and the Swiss Federal Office of Energy (SFOE) presents interactive guidelines for energy management in the area of facility management. These guidelines are based on the results of a project carried out by the International Energy Agency's Annex 40 'Operator competence'. The guidelines provide a step-by-step guide from initial analysis through to successful project completion and answer many questions that may crop up during the process. The focus is placed on energy aspects. Tools and 14 sample process descriptions are provided along with practical examples. Theoretical aspects are also presented and discussed, including models for operator roles and the processes involved. Also, change, risk and knowledge management are examined. Notes and information on possibilities for further education are presented.

  20. Management support and perceived consumer satisfaction in skilled nursing facilities.

    Science.gov (United States)

    Metlen, Scott; Eveleth, Daniel; Bailey, Jeffrey J

    2005-08-01

    How managers 'manage' employees influences important firm outcomes. Heskett, Sasser, and Schlesinger contend that the level of internal support for service workers will influence consumer satisfaction. This study empirically explores how skilled nursing facility (SNF) managers affect consumer satisfaction by encouraging employee effectiveness and listening to employees to determine how to improve employee effectiveness. We extend previous research by proposing management as a form of internal support and demonstrating its relationship to service process integration, as a distinct form of internal support. The results of our individual-level investigation of 630 nursing assistants from 45 SNFs provide support for our two-part hypothesis. First, active management support and process integration, as elements of internal support, do lead to increased employee satisfaction and employee effectiveness. Second, the increased employee satisfaction and effectiveness was positively related to consumer satisfaction, as evaluated by the service workers. Thus, there is a positive influence of management's internal support of nursing assistants on perceived consumer satisfaction.

  1. Development of a Commonwealth Radioactive Waste Management Facility in Australia

    International Nuclear Information System (INIS)

    Hesterman, R.

    2006-01-01

    Full text: The Australian Government has commenced a process to build a Commonwealth Radioactive Waste Management Facility in the Northern Territory for management of radioactive wastes produced by Australian Government agencies. The Government is committed to safely managing its relatively small volume of low level radioactive waste (approximately 3800 cubic metres) and even smaller volume of intermediate level waste (around 400 cubic metres) that have been generated since the early 1950s from the research, medical and industrial use of radioactive materials. Australia has no high level radioactive waste as it does not have any nuclear power reactors. Australian states and territories are responsible for the safe and secure management of low level and intermediate level waste generated within their jurisdictions. They have jointly generated approximately 200 cubic metres of low level radioactive waste and under 100 cubic metres of intermediate level for the same period. In July 2004, the Prime Minister announced that the Australian Government would examine the suitability of Commonwealth land holdings, both onshore and offshore, for establishing the Facility. An initial assessment of offshore territories by the Department of Education, Science and Training (DEST) did not find any sufficiently suitable sites for hosting the Facility. This was due to the low elevation of most territories, inadequate infrastructure and incompatibility with existing land uses. In July 2005, Dr Nelson, then the Minister for Education, Science and Training, announced that three Department of Defence properties in the Northern Territory would be investigated for siting the Facility. The three properties are Fishers Ridge, about 43 kilometres southeast of Katherine; Harts Range, 100 kilometres directly northeast of Alice Springs; and Mt Everard, about 27 kilometres directly northwest of Alice Springs. In addition, the Commonwealth Radioactive Waste Management Act 2005, enacted in December

  2. Management of movement of visitors in a sports facility

    Directory of Open Access Journals (Sweden)

    Kuzović Duško

    2017-01-01

    Full Text Available Management of movement of visitors in a facility is essential for a successful organization of a sports event. From a visitor's entrance into the premises of the sports facility to its place on the stands, corridors have to be defined. Depending on its position, a corridor is additionally divided into logical zones: a zone between a border of the plot and the facility, an outer zone, an internal zone, a zone of seats or stands. Precise specification of needs within a zone is used to organize movement of visitors safely and efficiently. Communications can be horizontal and vertical. Each group has set rules for design and maintenance. Depending on the applied technical solution, entrances have a defined capacity that must be taken into account when a sporting event is organized. Besides the entrance for visitors, there are many entrances dedicated to specific groups such as competitors, VIP, security, service, medical assistance, media, persons with special needs, etc. Management of movement of users in a facility must be a subject of careful analysis because it is of a great importance for the general impression on the quality of a sports facility.

  3. Environmental management at the El Cabril disposal facility

    International Nuclear Information System (INIS)

    Quesada Bueno, J. D.

    2000-01-01

    In 1996, ENRESA decided to implement and certify an environmental management system based on the ISO 14001 standard. This article includes a description of the reasons that led the company to take decision to implement the system and of the different phases of the project. These phases include the main activities carried out to implement a management system at a facility already equipped with a mature and contrasted quality system, where the main environment issue is controlled both internally by the system and externally by the regulatory authority. Finally, the paper describes the most innovative characteristics of the system implemented, such as the environmental impact assessment method or the integration of procedures containing quality and environmental requirements. Finally, the most outstanding improvement actions performed since implementation of the system are described. It should be pointed out that this has been the first waste disposal facility to certify its environmental management system. (Author)

  4. ESCO as Innovative Facilities Management in Danish Municipalities

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole; Oesten, Pimmie; Nielsen, Susanne Balslev

    2010-01-01

     Purpose:  Increasing energy efficiency of existing buildings is high on the Facility Management (FM) agenda, therefore building owners and FM Managers need insight into a variety of organizational possibilities for energy renovation projects. This paper explores how ESCO can foster innovative....... It is the first publication from the project "Energy Service Concepts" carried out at the Danish Centre for Facilities Management (www.cfm.dtu.dk). Results have not been published before....... changes in the municipal FM-function, including dissemination of their ESCO-competence to local building owners. Theory:  Theory of Public Innovation is used to see the new roles of local authorities in promoting energy renovations to building owners with a relatively limited FM-competence. Design/methodology...

  5. Radiological risks of transports to central waste management facilities

    International Nuclear Information System (INIS)

    Lange, F.

    1997-01-01

    Transports of radioactive waste from nuclear facilities have been a matter of frequent public concern in the recent past. News reports, protests and questions concerning the radiological risk tended to concentrate on transports to and from central waste management facilities, e.g. transports of spent fuel elements to reprocessing plants abroad (France, England), transports to intermediate storage sites (Ahaus, Gorleben), transports to operative (Morsleben) and projected (Konrad) final storage sites, and transports of vitrified high-activity waste from reprocessing plants to the intermediate storage site (Gorleben). (orig.) [de

  6. The value of the facilities management function in the UK NHS community health-care sector.

    Science.gov (United States)

    Featherstone, P; Baldry, D

    2000-01-01

    This paper stresses the importance of the strategic integration of the organisational facilities management function as being an essential prerequisite towards facilities and organisational effectiveness. The impact of both the strategic and operational facilities management function on community health-care facility users is also documented. The value of the facilities management function in terms of other health-care related organisational core deliverables is also observed. Mechanisms for general organisational facilities management improvement are identified and a number of facilities management performance measuring tools outlined.

  7. Waste Management and Remedial Action Division programs and facilities report

    International Nuclear Information System (INIS)

    Corrill, L.S.

    1994-12-01

    Routine waste management operations of the Energy Systems Waste Management Organization (ESWMO) at Oak Ridge National Laboratory (ORNL) are the direct responsibility of the Waste Management and Remedial Action Division(WMRAD). This document provides a comprehensive description of WMRAD's site activities, describes how programs are conducted, and identifies those facilities used to manage waste as of July 1994. The ORNL waste management mission is reduction, collection, treatment, storage, and disposal of U.S. Department of Energy (DOE) wastes, generated primarily in pursuit of ORNL missions, in order to protect human health and safety and the environment. In carrying out this mission, waste management staff in the WMRAD will (1) guide ORNL in optimizing waste reduction and waste management capabilities and in minimizing generation and (2) conduct waste management operations in a compliant, publicly acceptable, technically sound, environmentally correct, timely, and cost-efficient manner. Waste management requirements for DOE radioactive wastes are detailed in DOE Order 5820.2A, and the ORNL Waste Management Program encompasses all elements of this order. The requirements of this DOE order and other appropriate DOE orders, along with applicable Tennessee Department of Environment and Conservation and U.S. Environmental Protection Agency rules and regulations and local environmental, safety, and health requirements, provide the principal source of regulatory guidance for waste management operations at ORNL

  8. Characterization of the geochemical processes present in the radionuclides and metals mobilization in the tailing dam at the Uranium Mining and Milling Facilities - Pocos de Caldas, MG, Brazil; Caracterizacao dos processos geoquimicos atuantes na mobilizacao de radionuclideos e metais na bacia de rejeitos do complexo minero-industrial de Pocos de Caldas, MG, Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, Patricia Freitas

    1995-08-01

    In Brazil, the first step of nuclear fuel cycle - the mining and milling of the uranium ore - is developed at the Uranium Mining and Milling Facilities of Pocos de Caldas, Minas Gerais state. The wastes management is a very important aspect of the process. The understanding of the geochemical processes that occur in the tailings dam is a key question to define a plan of action concerning the decommissioning strategy of the facility. The objective of the present work was to give some issues to help in the adoption of the remedial actions concerning the decommissioning of the facility. It focused on the characterization of the most important geochemical processes regulating the mobilization of radionuclides and heavy metals in the tailings dam. Two cores from the tailings dam (uncovered area) were collected. Seepage and drainage waters were sampled, the same being true for the tailings dam lake. Groundwater form an aquifer bellow the tailings dam and superficial waters from a river that receives the effluents of the dam (Soberbo River) were also sampled. Data from the mining company were used to calculate the inventory of radionuclides and heavy metals deposited in the waste dam.The obtained results showed that pyrite oxidation is the key process in the mobilization of radionuclides and heavy metals from the wastes. Pyrite oxidation is a process regulated by oxygen diffusion and water. In the studied scenario it could be shown that the process was limited to a one meter deep layer in the uncovered part of the waste dam. Because of this, Fe, Al, Mn, Zn, Th and {sup 238} U showed higher concentrations in the bottom layers of the cores in relation to the upper ones. {sup 226} Ra and {sup 210} Pb showed opposite patterns. The coprecipitation with Ca SO{sub 4} was the most relevant mechanism in both radionuclides immobilization in the wastes. Sulfate was the only chemical species that could be assigned as a contaminant in aquifer bellow the waste dam. As a conclusion, the

  9. A Supply Chain Design Problem Integrated Facility Unavailabilities Management

    Directory of Open Access Journals (Sweden)

    Fouad Maliki

    2016-08-01

    Full Text Available A supply chain is a set of facilities connected together in order to provide products to customers. The supply chain is subject to random failures caused by different factors which cause the unavailability of some sites. Given the current economic context, the management of these unavailabilities is becoming a strategic choice to ensure the desired reliability and availability levels of the different supply chain facilities. In this work, we treat two problems related to the field of supply chain, namely the design and unavailabilities management of logistics facilities. Specifically, we consider a stochastic distribution network with consideration of suppliers' selection, distribution centres location (DCs decisions and DCs’ unavailabilities management. Two resolution approaches are proposed. The first approach called non-integrated consists on define the optimal supply chain structure using an optimization approach based on genetic algorithms (GA, then to simulate the supply chain performance with the presence of DCs failures. The second approach called integrated approach is to consider the design of the supply chain problem and unavailabilities management of DCs in the same model. Note that, we replace each unavailable DC by performing a reallocation using GA in the two approaches. The obtained results of the two approaches are detailed and compared showing their effectiveness.

  10. Strategic aspects on waste management in decommissioning of nuclear facilities

    International Nuclear Information System (INIS)

    Rannemalm, T.; Eliasson, S.; Larsson, A.; Lidar, P.; Bergh, N.; Hedin, G.

    2017-01-01

    A team composed of experts from the facility owner OKG, Westinghouse and Studsvik (today Cyclife Sweden and Studsvik Consulting) was asked to develop a basis for decision on an overall strategy for the management of the material and waste arising from the decommissioning of two BWR NPPs at the Oskarshamn site in Sweden. To be able to provide a good basis for decision the full waste management chain from generation to disposition, i.e. clearance or disposal had to be assessed, categorised, quantified and analysed with regards to costs, environmental impact and risks. A systematic approach was applied taking benefit of the decommissioning studies made previously for the two facilities, the decommissioning concepts developed by Ndcon (the partnership in decommissioning between Studsvik and Westinghouse) and the combined knowledge and experience in the project team. In total 4 different waste management concepts were compared individually and in combinations. The four concepts evaluated were based on: direct disposal in the national geological repository; treatment of the waste for volume reduction and where applicable clearance in an external waste treatment facility; decontamination and clearance in an on-site waste treatment facility; direct disposal in a near surface repository at the NPP site. It was important to be able to compare the different options in a quantifiable way. Therefore the project team set up a matrix with parameters for the different options gained from the utility, the national waste management company, external vendors and the experience of the team. In this way a quantitative analysis could be done with the four different waste management options. In addition to the quantitative analysis the team summarised decades of experience in radioactive waste management and decommissioning recommendations and risk analyses. Special attention was given to risk mitigation and redundancy in the waste management chain. The development of an overall waste

  11. Risk management program for the 283-W water treatment facility

    International Nuclear Information System (INIS)

    Green, W.E.

    1999-01-01

    This Risk Management (RM) Program covers the 283-W Water Treatment Facility (283W Facility), located in the 200 West Area of the Hanford Site. A RM Program is necessary for this facility because it stores chlorine, a listed substance, in excess of or has the potential to exceed the threshold quantities defined in Title 40 of the Code of Federal Regulations (CFR) Part 68 (EPA, 1998). The RM Program contains data that will be used to prepare a RM Plan, which is required by 40 CFR 68. The RM Plan is a summary of the RM Program information, contained within this document, and will be submitted to the U.S. Environmental Protection Agency (EPA) ultimately for distribution to the public. The RM Plan will be prepared and submitted separately from this document

  12. Crisis Management training at nuclear facilities: Simulations in bomb threats

    International Nuclear Information System (INIS)

    Barton, L.

    1993-01-01

    Substantial enhancements to the study of the theoretical and applied foundations of crisis management have been achieved in recent years. Whereas risk managers study 'the probability that a harmful consequence of a particular event will occur during a given time,' crisis management explores unexpected, potentially negative events with short or long-term implications involving injury to life or property. In this regard, crisis management focuses on the mitigation of organizational after-shock; risk management is preventative in scope. While the risk management function of nuclear facilities has been addressed widely in the literature, comparatively little has been written that addresses the myriad, interdisciplinary challenges associated with managing organizational disarray. The issue of crisis management has assumed paramount importance in recent years due to unexpected geopolitical events (e.g., Persian Gulf War), rampant violence facing organizations (e.g., mass shootings in Killeen, Texas and several U.S. Post Offices) and an acceleration of serious crisis impacting large organizations (e.g., Three Mile Island, Chernobyl, Exxon Valdez, NASA Challenger disaster). Without question, the public is increasingly demanding that organizational managers possess a fundamental understanding of crisis management and its principal underpinnings: effective public communication regarding the event and a return to normalcy, employee and public safety and evacuation measures, and other mitigation measures will protect life and property

  13. The grand challenge of managing the petascale facility.

    Energy Technology Data Exchange (ETDEWEB)

    Aiken, R. J.; Mathematics and Computer Science

    2007-02-28

    This report is the result of a study of networks and how they may need to evolve to support petascale leadership computing and science. As Dr. Ray Orbach, director of the Department of Energy's Office of Science, says in the spring 2006 issue of SciDAC Review, 'One remarkable example of growth in unexpected directions has been in high-end computation'. In the same article Dr. Michael Strayer states, 'Moore's law suggests that before the end of the next cycle of SciDAC, we shall see petaflop computers'. Given the Office of Science's strong leadership and support for petascale computing and facilities, we should expect to see petaflop computers in operation in support of science before the end of the decade, and DOE/SC Advanced Scientific Computing Research programs are focused on making this a reality. This study took its lead from this strong focus on petascale computing and the networks required to support such facilities, but it grew to include almost all aspects of the DOE/SC petascale computational and experimental science facilities, all of which will face daunting challenges in managing and analyzing the voluminous amounts of data expected. In addition, trends indicate the increased coupling of unique experimental facilities with computational facilities, along with the integration of multidisciplinary datasets and high-end computing with data-intensive computing; and we can expect these trends to continue at the petascale level and beyond. Coupled with recent technology trends, they clearly indicate the need for including capability petascale storage, networks, and experiments, as well as collaboration tools and programming environments, as integral components of the Office of Science's petascale capability metafacility. The objective of this report is to recommend a new cross-cutting program to support the management of petascale science and infrastructure. The appendices of the report document current and projected

  14. Operation And Maintenance In Facilities Management Practices: A Gap Analysis In Malaysia

    OpenAIRE

    Zawawi Zuraihana Ahmad; Khalid Mohd Khazli Aswad; Ahmad Nur Azfahani; Zahari Nurul Fadzila; Agus Salim Nuzaihan Aras

    2016-01-01

    Facilities management in Malaysia has started as early as 1990s during the development of mega projects such as Putrajaya in 1999 [8, 9]. During this period, Malaysia was introduced to an integrated property management and maintenance services known as facilities management. However, its implementation according to the standard practice is still being disputed. The purpose of facilities management standard practices is to provide the facility management profession with a leading reference on ...

  15. Graphics-based nuclear facility modeling and management

    International Nuclear Information System (INIS)

    Rod, S.R.

    1991-07-01

    Nuclear waste management facilities are characterized by their complexity, many unprecedented features, and numerous competing design requirements. This paper describes the development of comprehensive descriptive databases and three-dimensional models of nuclear waste management facilities and applies the database/model to an example facility. The important features of the facility database/model are its abilities to (1) process large volumes of site data, plant data, and nuclear material inventory data in an efficient, integrated manner; (2) produce many different representations of the data to fulfill information needs as they arise; (3) create a complete three-dimensional solid model of the plant with all related information readily accessible; and (4) support complete, consistent inventory control and plant configuration control. While the substantive heart of the system is the database, graphic visualization of the data vastly improves the clarity of the information presented. Graphic representations are a convenient framework for the presentation of plant and inventory data, allowing all types of information to be readily located and presented in a manner that is easily understood. 2 refs., 5 figs., 1 tab

  16. Delivering Sustainable Facilities Management in Danish Housing Estates

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Jensen, Jesper Ole; Jensen, Per Anker

    2009-01-01

    is supporting social, economical and environmental sustainable development. Sustainable facility management (SFM) is as an 'umbrella' for various ways of reducing flows of energy, water and waste in the daily operation of the buildings, for instance by regular monitoring the consumption, by using 'green......Housing plays a central role in sustainable development due to large resource consumption and as transition agent towards sustainable lifestyles. The aim is to evaluate current practice of housing administration in Denmark in order to evaluate if and how sustainable facilities management...... accounting', by applying policies for sustainability, enhanced user awareness etc. In Denmark, despite attempts by government and NGO´s, implementation of sustainable resource consumption in existing buildings is still unsolved. Monitoring the resource consumption is part of the solution, but the entire FM...

  17. OPP og indkøb af Facilities Management ydelser

    DEFF Research Database (Denmark)

    Kristiansen, Kristian

    Dette er den 3. og sidste rapport i forskningsprojektet om OPP og indkøb af Facilities Management ydelser. Fokus er denne gang rettet mod bestræbelserne på at skabe større integration i byggeprocessen. Det vil blive undersøgt, hvorvidt sådanne bestræbelser – som der kan findes eksempler på både i...... UK og i Danmark – vil kunne fremme en inddragelse af Facilities Management viden i planlægning, projektering og udførelse. Denne problemstilling skal ses i forlængelse af det forudgående arbejde i forskningsprojektet....

  18. Elevated genetic structure in the coastal tailed frog (Ascaphus truei) in managed redwood forests.

    Science.gov (United States)

    Aguilar, Andres; Douglas, Robert B; Gordon, Eric; Baumsteiger, Jason; Goldsworthy, Matthew O

    2013-03-01

    Landscape alterations have dramatic impacts on the distribution of genetic variation within and among populations and understanding these effects can guide contemporary and future conservation strategies. We initiated a landscape-scale genetic study of the coastal tailed frog (Ascaphus truei) on commercial timberlands within the southern range of the species in Mendocino County (CA, USA). In total, 294 individuals from 13 populations were analyzed at 9 microsatellite loci. None of the sampled populations departed from mutation-drift equilibrium, indicating recent population bottlenecks were not detected in contemporary samples. Fine-scale analysis indicated sampled populations were structured at the watershed level (mean F (ST) = 0.077 and mean G'(ST) = 0.425). Landscape analyses suggested wet and moist areas may serve as significant corridors for gene flow within watersheds in this region (r (2) = 0.32-0.54 for moisture-related features). Results indicate populations of frogs may have persisted at this scale through intense periods of timber harvest, making southern range edge populations of coastal tailed frogs resilient to past land use practices.

  19. Management concepts and safety applications for nuclear fuel facilities

    Energy Technology Data Exchange (ETDEWEB)

    Eisner, H.; Scotti, R.S. [George Washington Univ., Washington, DC (United States). School of Engineering and Applied Science; Delicate, W.S. [KEVRIC Co., Inc., Silver Spring, MD (United States)

    1995-05-01

    This report presents an overview of effectiveness of management control of safety. It reviews several modern management control theories as well as the general functions of management and relates them to safety issues at the corporate and at the process safety management (PSM) program level. Following these discussions, structured technique for assessing management of the safety function is suggested. Seven modern management control theories are summarized, including business process reengineering, the learning organization, capability maturity, total quality management, quality assurance and control, reliability centered maintenance, and industrial process safety. Each of these theories is examined for-its principal characteristics and implications for safety management. The five general management functions of planning, organizing, directing, monitoring, and integrating, which together provide control over all company operations, are discussed. Under the broad categories of Safety Culture, Leadership and Commitment, and Operating Excellence, key corporate safety elements and their subelements are examined. The three categories under which PSM program-level safety issues are described are Technology, Personnel, and Facilities.

  20. Management concepts and safety applications for nuclear fuel facilities

    International Nuclear Information System (INIS)

    Eisner, H.; Scotti, R.S.

    1995-05-01

    This report presents an overview of effectiveness of management control of safety. It reviews several modern management control theories as well as the general functions of management and relates them to safety issues at the corporate and at the process safety management (PSM) program level. Following these discussions, structured technique for assessing management of the safety function is suggested. Seven modern management control theories are summarized, including business process reengineering, the learning organization, capability maturity, total quality management, quality assurance and control, reliability centered maintenance, and industrial process safety. Each of these theories is examined for-its principal characteristics and implications for safety management. The five general management functions of planning, organizing, directing, monitoring, and integrating, which together provide control over all company operations, are discussed. Under the broad categories of Safety Culture, Leadership and Commitment, and Operating Excellence, key corporate safety elements and their subelements are examined. The three categories under which PSM program-level safety issues are described are Technology, Personnel, and Facilities

  1. Study on Customer Satisfaction with Facilities Management Services in Lithuania

    Science.gov (United States)

    Lepkova, Natalija; Žūkaitė-Jefimovienė, Giedrė

    2012-12-01

    The article introduces the concept and content of facilities management (FM) services. The paper presents the concept of customer satisfaction and discusses the key factors which influence the opinions of customers and their satisfaction or dissatisfaction with the services provided. The article presents two studies: a brief survey of several FM service providers and a survey of customer satisfaction with FM services in Lithuania. The conclusions are given at the end of the article.

  2. Software Manages Documentation in a Large Test Facility

    Science.gov (United States)

    Gurneck, Joseph M.

    2001-01-01

    The 3MCS computer program assists and instrumentation engineer in performing the 3 essential functions of design, documentation, and configuration management of measurement and control systems in a large test facility. Services provided by 3MCS are acceptance of input from multiple engineers and technicians working at multiple locations;standardization of drawings;automated cross-referencing; identification of errors;listing of components and resources; downloading of test settings; and provision of information to customers.

  3. Facilities Management of Hospital Data Processing—An Update

    Science.gov (United States)

    Jacobs, Stanley E.

    1981-01-01

    This article discusses a recent controversy over the value of facilities management (FM), describes four type of FM usage by hospitals, provides a listing of firms now providing FM services to hospitals together with the number of hospitals serviced by each, examines factors bearing upon the future growth of FM usage by hospitals, predicts the rate of proliferation, and identifies some of the lessons learned as the hospital FM industry has matured.

  4. The Tail of BPM

    Science.gov (United States)

    Kruba, Steve; Meyer, Jim

    Business process management suites (BPMS's) represent one of the fastest growing segments in the software industry as organizations automate their key business processes. As this market matures, it is interesting to compare it to Chris Anderson's 'Long Tail.' Although the 2004 "Long Tail" article in Wired magazine was primarily about the media and entertainment industries, it has since been applied (and perhaps misapplied) to other markets. Analysts describe a "Tail of BPM" market that is, perhaps, several times larger than the traditional BPMS product market. This paper will draw comparisons between the concepts in Anderson's article (and subsequent book) and the BPM solutions market.

  5. Designing an Institutional Web-based Core Facility Management System

    Science.gov (United States)

    Tabarini, D.; Clisham, S.; John, D.; Hagen, A.

    2011-01-01

    The authors and their four institutions collaborated to (i) identify the key challenges to core facility management; (ii) identify the requirements for an effective core facility management system; (iii) design, test and deploy such a system. Through a series of interviews with all participants in the core work flow (customers, core staff, administrators), the team identified a number of key challenges, including: (i) difficulty for researchers in identifying available services; (ii) inconsistent processes for requesting services; (iii) inadequate controls for approving service requests; (iv) inefficient processes for tracking and communicating about project processes; (v) time-consuming billing practices; (vi) incomplete revenue capture; (vii) manual reporting processes. The team identified the following requirements for a system to address these challenges: (i) ability to support a broad range of core business practices such as complex quote generation and project management; calendaring/equipment reservation management; sample tracking; complex forms; and import of usage data from hardware; (ii) ability to offer services for both internal and external customers, including flexible pricing and off-site access; (iii) ability to interact with institutional financial systems (e.g. SAP, PeopleSoft, Lawson, SunGard Banner) and identify management systems (e.g. Microsoft Active Directory, LDAP, and other SAML 2.0-compliant services). The team developed and deployed this system across the collaborative partners, as well as other major research institutions.

  6. Management plan -- Multi-Function Waste Tank Facility. Revision 1

    International Nuclear Information System (INIS)

    Fritz, R.L.

    1995-01-01

    This Westinghouse Hanford Company (WHC) Multi-Function Waste Tank Facility (MWTF) Management Plan provides guidance for execution WHC MWTF Project activities related to design, procurement, construction, testing, and turnover. This Management Plan provides a discussion of organizational responsibilities, work planning, project management systems, quality assurance (QA), regulatory compliance, personnel qualifications and training, and testing and evaluations. Classified by the US Department of Energy (DOE) as a major systems acquisition (MSA), the MWTF mission is to provide a safe, cost-effective, and environmentally sound method for interim storage of Hanford Site high-level wastes. This Management Plan provides policy guidance and direction to the Project Office for execution of the project activities

  7. Management plan -- Multi-Function Waste Tank Facility. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Fritz, R.L.

    1995-01-11

    This Westinghouse Hanford Company (WHC) Multi-Function Waste Tank Facility (MWTF) Management Plan provides guidance for execution WHC MWTF Project activities related to design, procurement, construction, testing, and turnover. This Management Plan provides a discussion of organizational responsibilities, work planning, project management systems, quality assurance (QA), regulatory compliance, personnel qualifications and training, and testing and evaluations. Classified by the US Department of Energy (DOE) as a major systems acquisition (MSA), the MWTF mission is to provide a safe, cost-effective, and environmentally sound method for interim storage of Hanford Site high-level wastes. This Management Plan provides policy guidance and direction to the Project Office for execution of the project activities.

  8. Management and Development of the RT Research Facilities and Infrastructures

    International Nuclear Information System (INIS)

    Kim, Won Ho; Nho, Young Chang; Kim, Jae Sung

    2009-01-01

    The purpose of this project are to operate the core facilities of the research for the Radiation Technology in stable and to assist the research activities efficiently in the industry, academic, and research laboratory. By developing the infrastructure of the national radio technology industry, we can activate the researching area of the RT and the related industry, and obtain the primary and original technology. The key point in the study of the RT and the assistance of the industry, academic, and research laboratory for the RT area smoothly, is managing the various of unique radiation facilities in our country. The gamma Phytotron and Gene Bank are essential in the agribiology because these facilities are used to preserve and utilize the genes and to provide an experimental field for the environment and biotechnology. The Radiation Fusion Technology research supporting facilities are the core support facilities, and are used to develop the high-tech fusion areas. In addition, the most advanced analytical instruments, whose costs are very high, should be managed in stable and be utilized in supporting works, and the experimental animal supporting laboratory and Gamma Cell have to be maintained in high level and managed in stable also. The ARTI have been developed the 30MeV cyclotron during 2005∼2006, aimed to produce radioisotopes and to research the beam applications as a result of the project, 'Establishment of the Infrastructure for the Atomic Energy Research Expansion', collaborated with the Korea Institute of Radiological and Medical Sciences. In addition, the ARTI is in the progress of establishing cyclotron integrated complex as a core research facility, using a proton beam to produce radioisotopes and to support a various research areas. The measurement and evaluation of the irradiation dose, and irradiation supporting technology of the Good Irradiation Practice(GIP) are essential in various researching areas. One thing to remember is that the publicity

  9. International experience in tailings pond remediation

    International Nuclear Information System (INIS)

    Robertson, A.MacG.

    2001-01-01

    Tailings pond remediation is required primarily on mine closure. While mining is an ancient industry, requirement for mine facility remediation is a comparatively new development. Requirement for remediation has come about partly as a result of mans awareness of the environmental impacts of mining and his desire to minimize this, partly, as a result of the ever-increasing scale and production rates of tailings generation and the resulting increased environmental impacts and safety risks. The paper starts with a review of the evolution of mans intolerance of environmental impacts from tailings production and the assignment of liability to remediate such impacts. Many of the tailings ponds currently undergoing remediation were designed and constructed using methods and technology that would be considered inappropriate for new impoundments being designed and developed today. The paper reviews the history of tailings impoundment design and construction practice and the resulting inherent deficiencies that must be remediated. Current practices and future trends in tailings pond remediation are reviewed. The evolution of regulatory requirements is not only in terms of technical and safety criteria, but also in terms of financial and political risk. Perhaps the most substantive driver of risk management is today the requirement for corporate governance at mining company board level and oversight of new project development in the underdeveloped countries by the large financial institutions responsible for funding projects. Embarrassment in the public eye and punishment in the stock markets for poor environmental and safety performance is driving the need for efficient and effective risk management of potential impacts and the remediation to avoid these. A basis for practical risk management is described. (orig.)

  10. WIPP Facility Work Plan for Solid Waste Management Units

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2001-02-25

    This 2001 Facility Work Plan (FWP) has been prepared as required by Module VII, Section VII.M.1 of the Waste Isolation Pilot Plant (WIPP) Hazardous Waste Facility Permit, NM4890139088-TSDF (the Permit); (NMED, 1999a), and incorporates comments from the New Mexico Environment Department (NMED) received on December 6, 2000 (NMED, 2000a). This February 2001 FWP describes the programmatic facility-wide approach to future investigations at Solid Waste Management Units (SWMUs) and Areas of Concern (AOCs) specified in the Permit. The permittees are evaluating data from previous investigations of the SWMUs and AOCs against the newest guidance proposed by the NMED. Based on these data, the permittees expect that no further sampling will be required and that a request for No Further Action (NFA) at the SWMUs and AOCs will be submitted to the NMED. This FWP addresses the current Permit requirements. It uses the results of previous investigations performed at WIPP and expands the investigations as required by the Permit. As an alternative to the Resource Conservation and Recovery Act (RCRA) Facility Investigation (RFI) specified in Module VII of the Permit, current NMED guidance identifies an Accelerated Corrective Action Approach (ACAA) that may be used for any SWMU or AOC (NMED, 1998). This accelerated approach is used to replace the standard RFI Work Plan and Report sequence with a more flexible decision-making approach. The ACAA process allows a Facility to exit the schedule of compliance contained in the Facility’s Hazardous and Solid Waste Amendments (HSWA) permit module and proceed on an accelerated time frame. Thus, the ACAA process can be entered either before or after an RFI Work Plan. According to the NMED's guidance, a facility can prepare an RFI Work Plan or Sampling and Analysis Plan (SAP) for any SWMU or AOC (NMED, 1998). Based on this guidance, a SAP constitutes an acceptable alternative to the RFI Work Plan specified in the Permit.

  11. Representing and managing Real Estate: BIM for Facility Management

    Directory of Open Access Journals (Sweden)

    Massimiliano Lo Turco

    2015-06-01

    Full Text Available This paper is intended to explore the potential of the Building Information Modelling (BIM methodologies to be applied to the various stages of the construction process, particularly as far as international guidelines and best practices supporting virtuous operating flows are concerned: the IT component, mostly graphic during the design phase, is mainly integrated and renewed in an alphanumeric format, and becomes an integrating part of the management and maintenance of the artefacts. The case studies developed in collaboration with the Building and Logistics Service of the Polytechnic of Turin substantiate such procedures, which, even if they are not widely spread as of yet, reach interoperability targets: integrated approaches to information sharing processes aimed at defining adequate intervention schedules on both large and small scales, through the definition of strategies aimed at restricting the enforcement of incorrect solutions.

  12. A proactive method for safety management in nuclear facilities

    International Nuclear Information System (INIS)

    Grecco, Claudio Henrique dos Santos; Carvalho, Paulo Victor Rodrigues de; Santos, Isaac Antonio Luquetti dos

    2014-01-01

    Due to the modern approach to address the safety of nuclear facilities which highlights that these organizations must be able to assess and proactively manage their activities becomes increasingly important the need for instruments to evaluate working conditions. In this context, this work presents a proactive method of managing organizational safety, which has three innovative features: 1) the use of predictive indicators that provide current information on the performance of activities, allowing preventive actions and not just reactive in safety management, different from safety indicators traditionally used (reactive indicators) that are obtained after the occurrence of undesired events; 2) the adoption of resilience engineering approach in the development of indicators - indicators are based on six principles of resilience engineering: top management commitment, learning, flexibility, awareness, culture of justice and preparation for the problems; 3) the adoption of the concepts and properties of fuzzy set theory to deal with subjectivity and consistency of human trials in the evaluation of the indicators. The fuzzy theory is used primarily to map qualitative models of decision-making, and inaccurate representation methods. The results of this study aim an improvement in performance and safety in organizations. The method was applied in a radiopharmaceutical shipping sector of a nuclear facility. The results showed that the method is a good monitoring tool objectively and proactively of the working conditions of an organizational domain

  13. Solid Waste Management Facilities with Permits by the Iowa DNR

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — All types of facilities that handle solid waste, including: sanitary landfills, appliance demanufacturing facilities, transfer stations, land application sites,...

  14. A hybrid froth flotation-filtration system as a pretreatment for oil sands tailings pond recycle water management: Bench- and pilot-scale studies.

    Science.gov (United States)

    Loganathan, Kavithaa; Bromley, David; Chelme-Ayala, Pamela; Gamal El-Din, Mohamed

    2015-09-15

    Through sustainable water management, oil sands companies are working to reduce their reliance on fresh water by minimizing the amount of water required for their operations and by recycling water from tailings ponds. This study was the first pilot-scale testing of a hybrid technology consisting of froth flotation combined with filtration through precoated submerged stainless steel membranes used to treat recycle water from an oil sands facility. The results indicated that the most important factor affecting the performance of the hybrid system was the influent water quality. Any rise in the levels of suspended solids or total organic carbon of the feed water resulted in changes of chemical consumption rates, flux rates, and operating cycle durations. The selections of chemical type and dosing rates were critical in achieving optimal performance. In particular, the froth application rate heavily affected the overall recovery of the hybrid system as well as the performance of the flotation process. Optimum surfactant usage to generate froth (per liter of treated water) was 0.25 mL/L at approximately 2000 NTU of influent turbidity and 0.015 mL/L at approximately 200 NTU of influent turbidity. At the tested conditions, the optimal coagulant dose was 80 mg/L (as Al) at approximately 2000 NTU of influent turbidity and recycle water. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Risk communication on the siting of radioactive waste management facility

    International Nuclear Information System (INIS)

    Okoshi, Minoru; Torii, Hiroyuki; Fujii, Yasuhiko

    2007-01-01

    Siting of radioactive waste management facilities frequently raise arguments among stakeholders such as a municipal government and the residents. Risk communication is one of the useful methods of promoting mutual understanding on related risks among stakeholders. In Finland and Sweden, siting selection procedures of repositories for spent nuclear fuels have been carried out successfully with risk communication. The success reasons are analyzed based on the interviews with those who belong to the regulatory authorities and nuclear industries in both countries. Also, in this paper, risk communication among the Japan Radioisotope Association (JRIA), a local government and the general public, which was carried out during the establishment process of additional radioactive waste treatment facilities in Takizawa Village, Iwate Prefecture, is analyzed based on articles in newspapers and interviews with persons concerned. The analysis results showed that good risk communication was not carried out because of the lack of confidence on the JRIA, decision making rules, enough communication chances and economic benefits. In order to make good use of these experiences for the future establishment of radioactive waste management facilities, the lessons learned from these cases are summarized and proposals for good risk communication (establishment of exploratory committee and technical support system for decision making, and measurements to increase familiarity of radioactive waste) are discussed. (author)

  16. Facilities management and corporate real estate management : FM/CREM or FREM?

    NARCIS (Netherlands)

    van der Voordt, Theo

    2017-01-01

    Purpose: This paper aims to explore similarities and dissimilarities between facilities management (FM) and corporate real estate management (CREM) regarding its history and key issues, and whether the similarities may result in a further integration of FM and CREM. Design/methodology/approach:

  17. Waste Management facilities fault tree databank 1995 status report

    Energy Technology Data Exchange (ETDEWEB)

    Minnick, W.V.; Wellmaker, K.A.

    1995-08-16

    The Safety Information Management and Analysis Group (SIMA) of the Safety Engineering Department (SED) maintains compilations of incidents that have occurred in the Separations and Process Control, Waste Management, Fuel Fabrication, Tritium and SRTC facilities. This report records the status of the Waste Management (WM) Databank at the end of CY-1994. The WM Databank contains more than 35,000 entries ranging from minor equipment malfunctions to incidents with significant potential for injury or contamination of personnel. This report documents the status of the WM Databank including the availability, training, sources of data, search options, Quality Assurance, and usage to which these data have been applied. Periodic updates to this memorandum are planned as additional data or applications are acquired.

  18. Managerial issues in facilities management: The impact of facilities service on student productivity

    DEFF Research Database (Denmark)

    Holzweber, Markus

    2017-01-01

    The study examines key issues and effects of managerial capability management in higher education premises at the University of Glasgow. A study was undertaken on the library’s ‘Learning Cafe’ area. This unique learning space provides complex process-oriented facilities- and IT services to students...... and users. The analysis of data related to the University of Glasgow Learning Cafe (UGLC) concept shows that developing and maintaining capabilities is strongly related to perceived productivity and performance of students and users. Findings are that managerial cognition and managerial human capital...

  19. CHANGE OF CONTRACTOR FOR THE FACILITIES MANAGEMENT ACTIVITIES AT CERN

    CERN Document Server

    2003-01-01

    The Facilities Management contract at CERN, under the responsibility of ST Division, Group FM, is in charge of the maintenance and minor works on tertiary installations (i.e. all structures and installations that have no direct relation to the running of the accelerators) for the following trades: - Technical: heating, ventilation, air conditioning, plumbing, electricity, civil engineering (painting, roofing, glazing, blinds, fencing, masonry etc.), cleansing, passenger and goods lifts, automatic and powered doors, kitchen equipment, roads, signs, keys and locks, office furniture, - Services: waste collection, security, green areas, cleaning and sanitary supplies, disinfection, rodent control and insect control. Starting from the 1st June the present contractor will stop some activities that will be taken under its responsibility by the new one, INGEST Facility. The remaining activities (including cleaning) will be moved on the 1st July. Minor perturbation in the service might occur. The contact number will ...

  20. CHANGE OF CONTRACTOR FOR THE FACILITIES MANAGEMENT ACTIVITIES AT CERN

    CERN Document Server

    2003-01-01

    The Facilities Management contract at CERN, under the responsibility of ST Division, Group FM, is in charge of the maintenance and minor works on tertiary installations (i.e. all structures and installations that have no direct relation to the running of the accelerators) for the following trades: - Technical: heating, ventilation, air conditioning, plumbing, electricity, civil engineering (painting, roofing, glazing, blinds, fencing, masonry etc.), cleansing, passenger and goods lifts, automatic and powered doors, kitchen equipment, roads, signs, keys and locks, office furniture, - Services: waste collection, security, green areas, cleaning and sanitary supplies, disinfection, rodent control and insect control. Starting from the 1st June the present contractor will stop some activities that will be taken under its responsibility by the new one, INGEST Facility. Others activities will be moved on the 1st July. Minor perturbation in the service might occur. The contact number will not change and will be opera...

  1. Mixed Waste Management Facility (MWMF) groundwater monitoring report

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, C.Y.

    1992-06-01

    During first quarter 1992, tritium, trichloroethylene, tetrachloroethylene, lead, antimony, I,I-dichloroethylene, 1,2-dichloroethane, gross alpha, mercury, nickel, nitrate, nonvolatile beta, and total alpha-emitting radium (radium-224 and radium-226) exceeded the US Environmental Protection Agency Primary Drinking Water Standards (PDWS) in groundwater samples from monitoring wells at the Mixed Waste Management Facility (MWMF) and adjacent facilities. Tritium and trichloroethylene were the most widespread constituents; 57 (49%) of the 116 monitored wells contained elevated tritium activities, and 21 (18%) wells exhibited elevated trichloroethylene concentrations Sixty-one downgradient wells screened in Aquifer Zone IIB2 (Water Table), Aquifer Zone IIB[sub 2] (Barnwell/McBean), and Aquifer Unit IIA (Congaree) contained constituents that exceeded the PDWS during first quarter 1992. Upgradient wells BGO 1D and HSB 85A, BC, and 85C did not contain any constituents that exceeded the PDWS. Upgradient well BGO 2D contained elevated tritium.

  2. Comprehensive safety cases for radioactive waste management facilities

    International Nuclear Information System (INIS)

    Woollam, P.B.

    1993-01-01

    Probabilistic safety assessment methodology is being applied by Nuclear Electric plc (NE) to the development of comprehensive safety cases for the radioactive waste management processing and accumulation facilities associated with its 26 reactor systems. This paper describes the methodology and the safety case assessment criteria employed by NE. An overview of the results from facilities used by the first 16 reactors is presented, together with more detail of a specific safety analysis: storage of fuel element debris. No risk to the public greater than 10 -6 /y has been identified and the more significant risks arise from the potential for radioactive waste fires. There are no unacceptable risks from external hazards such as flooding, aircrash or seismic events. Some operations previously expected to have significant risks in fact have negligible risks, while the few faults with risks exceeding the assessment criteria were only identified as a result of this study

  3. Evapotranspiration And Geochemical Controls On Groundwater Plumes At Arid Sites: Toward Innovative Alternate End-States For Uranium Processing And Tailings Facilities

    International Nuclear Information System (INIS)

    Looney, Brian B.; Denham, Miles E.; Eddy-Dilek, Carol A.; Millings, Margaret R.; Kautsky, Mark

    2014-01-01

    Management of legacy tailings/waste and groundwater contamination are ongoing at the former uranium milling site in Tuba City AZ. The tailings have been consolidated and effectively isolated using an engineered cover system. For the existing groundwater plume, a system of recovery wells extracts contaminated groundwater for treatment using an advanced distillation process. The ten years of pump and treat (P and T) operations have had minimal impact on the contaminant plume - primarily due to geochemical and hydrological limits. A flow net analysis demonstrates that groundwater contamination beneath the former processing site flows in the uppermost portion of the aquifer and exits the groundwater as the plume transits into and beneath a lower terrace in the landscape. The evaluation indicates that contaminated water will not reach Moenkopi Wash, a locally important stream. Instead, shallow groundwater in arid settings such as Tuba City is transferred into the vadose zone and atmosphere via evaporation, transpiration and diffuse seepage. The dissolved constituents are projected to precipitate and accumulate as minerals such as calcite and gypsum in the deep vadose zone (near the capillary fringe), around the roots of phreatophyte plants, and near seeps. The natural hydrologic and geochemical controls common in arid environments such as Tuba City work together to limit the size of the groundwater plume, to naturally attenuate and detoxify groundwater contaminants, and to reduce risks to humans, livestock and the environment. The technical evaluation supports an alternative beneficial reuse (''brownfield'') scenario for Tuba City. This alternative approach would have low risks, similar to the current P and T scenario, but would eliminate the energy and expense associated with the active treatment and convert the former uranium processing site into a resource for future employment of local citizens and ongoing benefit to the Native American Nations

  4. Evapotranspiration And Geochemical Controls On Groundwater Plumes At Arid Sites: Toward Innovative Alternate End-States For Uranium Processing And Tailings Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Looney, Brian B.; Denham, Miles E.; Eddy-Dilek, Carol A.; Millings, Margaret R.; Kautsky, Mark

    2014-01-08

    Management of legacy tailings/waste and groundwater contamination are ongoing at the former uranium milling site in Tuba City AZ. The tailings have been consolidated and effectively isolated using an engineered cover system. For the existing groundwater plume, a system of recovery wells extracts contaminated groundwater for treatment using an advanced distillation process. The ten years of pump and treat (P&T) operations have had minimal impact on the contaminant plume – primarily due to geochemical and hydrological limits. A flow net analysis demonstrates that groundwater contamination beneath the former processing site flows in the uppermost portion of the aquifer and exits the groundwater as the plume transits into and beneath a lower terrace in the landscape. The evaluation indicates that contaminated water will not reach Moenkopi Wash, a locally important stream. Instead, shallow groundwater in arid settings such as Tuba City is transferred into the vadose zone and atmosphere via evaporation, transpiration and diffuse seepage. The dissolved constituents are projected to precipitate and accumulate as minerals such as calcite and gypsum in the deep vadose zone (near the capillary fringe), around the roots of phreatophyte plants, and near seeps. The natural hydrologic and geochemical controls common in arid environments such as Tuba City work together to limit the size of the groundwater plume, to naturally attenuate and detoxify groundwater contaminants, and to reduce risks to humans, livestock and the environment. The technical evaluation supports an alternative beneficial reuse (“brownfield”) scenario for Tuba City. This alternative approach would have low risks, similar to the current P&T scenario, but would eliminate the energy and expense associated with the active treatment and convert the former uranium processing site into a resource for future employment of local citizens and ongoing benefit to the Native American Nations.

  5. National Ignition Facility Cryogenic Target Systems Interim Management Plan

    International Nuclear Information System (INIS)

    Warner, B

    2002-01-01

    Restricted availability of funding has had an adverse impact, unforeseen at the time of the original decision to projectize the National Ignition Facility (NIF) Cryogenic Target Handling Systems (NCTS) Program, on the planning and initiation of these efforts. The purpose of this document is to provide an interim project management plan describing the organizational structure and management processes currently in place for NCTS. Preparation of a Program Execution Plan (PEP) for NCTS has been initiated, and a current draft is provided as Attachment 1 to this document. The National Ignition Facility is a multi-megajoule laser facility being constructed at Lawrence Livermore National Laboratory (LLNL) by the National Nuclear Security Administration (NNSA) in the Department of Energy (DOE). Its primary mission is to support the Stockpile Stewardship Program (SSP) by performing experiments studying weapons physics, including fusion ignition. NIF also supports the missions of weapons effects, inertial fusion energy, and basic science in high-energy-density physics. NIF will be operated by LLNL under contract to the University of California (UC) as a national user facility. NIF is a low-hazard, radiological facility, and its operation will meet all applicable federal, state, and local Environmental Safety and Health (ES and H) requirements. The NCTS Interim Management Plan provides a summary of primary design criteria and functional requirements, current organizational structure, tracking and reporting procedures, and current planning estimates of project scope, cost, and schedule. The NIF Director controls the NIF Cryogenic Target Systems Interim Management Plan. Overall scope content and execution schedules for the High Energy Density Physics Campaign (SSP Campaign 10) are currently undergoing rebaselining and will be brought into alignment with resources expected to be available throughout the NNSA Future Years National Security Plan (FYNSP). The revised schedule for

  6. Prioritizing interventions to manage polypharmacy in Australian aged care facilities.

    Science.gov (United States)

    Jokanovic, Natali; Wang, Kate N; Dooley, Michael J; Lalic, Samanta; Tan, Edwin Ck; Kirkpatrick, Carl M; Bell, J Simon

    Polypharmacy is highly prevalent in residential aged care facilities (RACFs). Although polypharmacy is sometimes unavoidable, polypharmacy has been associated with increased morbidity and mortality. To identify and prioritize a range of potential interventions to manage polypharmacy in RACFs from the perspectives of health care professionals, health policy and consumer representatives. Two nominal group technique (NGT) sessions were convened in August 2015. A purposive sample (n = 19) of clinicians, researchers, managers and representatives of consumer, professional and health policy organizations were asked to nominate interventions to address the prevalence and appropriateness of medication use. Participants were then asked to prioritize five interventions suitable for possible implementation at the system level. Six of 16 potential interventions were prioritized highest for possible implementation in clinical practice, with two interventions prioritized as second highest. The top interventions in rank order were 'implementation of a pharmacist-led medication reconciliation service for new residents,' 'conduct facility-level audits and feedback to staff and health care professionals,' 'develop deprescribing scripts to assist clinician-resident discussion,' 'develop or revise prescribing guidelines specific to older people with multimorbidity in RACFs,' 'implement electronic medication charts and records' and 'better support Medication Advisory Committees (MACs) to address medication appropriateness.' This study prioritized a range of potential interventions that may be used to assist clinicians and policy makers develop a comprehensive strategy to manage polypharmacy in RACFs. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. THE COMBINED USE OF BUSINESS MANAGEMENT WITH FACILITY MANAGEMENT AS AN OPTION FOR INTELLIGENT BUILDING

    Directory of Open Access Journals (Sweden)

    Andreas Dittmar Weise

    2014-01-01

    Full Text Available Words like Business Management (BM and Facility Management (FM are well known as separate management methods. FM offers transparency about their property costs and exploitation, starting from the planning phase until its demolition. The investor sees this in the property invested capital and its recoverable yield. This means they also want a profit with their real estates. Besides this, changes in the social and environmental requirements become necessary to adapt the properties. The solution is called Intelligent Building. Its primary aim is to collect and select previous knowledge and information about Facility Management and Business Management. It is an application, mainly with sight to characterize and describe the possibilities of use of intelligent buildings as a combination of Facility and Business Management. This paper is an indirect survey carried out through a documental procedure in the form of a bibliographic research and theoretician study. Intelligent Building as combination of FM and BM is new, but in our times necessary to satisfy the needs of the demand. This type of building needs to be flexible in its structure and services, open for changes in environmental requirements, e.g. saving energy, and needs a lot of technology to realize their functions. Consequently, it will be sustainable for a value enhancement. With a Computer Aided Facilities Management system this is possible and the company will be more flexible in relation to the competitors and future changes.

  8. Recent initiatives to improve tailings and water management in the expanding Australian uranium milling industry

    International Nuclear Information System (INIS)

    Ring, R.J.; Woods, P.H.; Muller, H.B.

    2001-01-01

    This paper discusses the environmental and safety related changes that have recently occurred, or are about to be implemented in the Australian uranium milling industry. There are several drivers for these changes. The most important are the significant expansions to the Ranger and Olympic Dam uranium mills, the mining of a new orebody at Ranger and Government permission for the development of the Jabiluka deposit. The major changes in the operation of mines relate to the conservation and recycle of water, an important environmental issue in the arid country surrounding the Olympic Dam deposit, and tailings disposal strategies recently adopted or under consideration. These strategies include methods such as central thickened discharge, and cemented paste-fill for both underground and above ground disposal. The new ICRP 60 recommendations concerning radiation exposure have not been of major concern to the Australian industry, as dose rates have been historically less than the new limits. Current and expected dose rates are discussed in the context of these recommendations. (author)

  9. The combined use of business management with facility management as an option for intelligent building

    OpenAIRE

    Weise, Andreas Dittmar; Schultz, Charles Albino; Trierweiller, Andréa Cristina; Rocha, Rudimar Antunes da; Peixe, Blênio Cesar Severo

    2014-01-01

    Words like Business Management (BM) and Facility Management (FM) are well known as separate management methods. FM offers transparency about their property costs and exploitation, starting from the planning phase until its demolition. The investor sees this in the property invested capital and its recoverable yield. This means they also want a profit with their real estates. Besides this, changes in the social and environmental requirements become necessary to adapt the properties. The soluti...

  10. WIPP Facility Work Plan for Solid Waste Management Units

    International Nuclear Information System (INIS)

    2000-01-01

    This Facility Work Plan (FWP) has been prepared as required by Module VII,Section VII.M.1 of the Waste Isolation Pilot Plant (WIPP) Hazardous Waste Permit, NM4890139088-TSDF (the Permit); (NMED, 1999a). This work plan describes the programmatic facility-wide approach to future investigations at Solid Waste Management Units (SWMUs) and Areas of Concern (AOCs) specified in the Permit. This FWP addresses the current Permit requirements. It uses the results of previous investigations performed at WIPP and expands the investigations as required by the Permit. As an alternative to the Resource Conservation and Recovery Act (RCRA) Facility Investigation (RFI) specified in Module VII of the Permit, current New Mexico Environment Department (NMED) guidance identifies an Accelerated Corrective Action Approach (ACAA) that may be used for any SWMU or AOC (NMED, 1998). This accelerated approach is used to replace the standard RFI Work Plan and Report sequence with a more flexible decision-making approach. The ACAA process allows a Facility to exit the schedule of compliance contained in the Facility's's Hazardous and Solid Waste Amendments (HSWA) permit module and proceed on an accelerated time frame. Thus, the ACAA process can be entered either before or after an RFI Work Plan. According to NMED's guidance, a facility can prepare an RFI Work Plan or Sampling and Analysis Plan (SAP) for any SWMU or AOC (NMED, 1998). Based on this guidance, a SAP constitutes an acceptable alternative to the RFI Work Plan specified in the Permit. The scope of work for the RFI Work Plan or SAP is being developed by the Permittees. The final content of the RFI Work Plan or SAP will be coordinated with the NMED for submittal on May 24, 2000. Specific project-related planning information will be included in the RFI Work Plan or SAP. The SWMU program at WIPP began in 1994 under U.S. Environmental Protection Agency (EPA) regulatory authority. NMED subsequently received regulatory authority from EPA. A

  11. Nuclear Security Management for Research Reactors and Related Facilities

    International Nuclear Information System (INIS)

    2016-03-01

    This publication provides a single source guidance to assist those responsible for the implementation of nuclear security measures at research reactors and associated facilities in developing and maintaining an effective and comprehensive programme covering all aspects of nuclear security on the site. It is based on national experience and practices as well as on publications in the field of nuclear management and security. The scope includes security operations, security processes, and security forces and their relationship with the State’s nuclear security regime. The guidance is provided for consideration by States, competent authorities and operators

  12. Management of the high-level nuclear power facilities

    International Nuclear Information System (INIS)

    Preda, Marin

    2003-05-01

    This thesis approaches current issues in the management of the high power nuclear facilities and as such it appears to be important particularly for nuclear power plant operation topics. Of special interest are the failure events entailing possible catastrophic situations. The contents is structured onto ten chapters. The first chapter describes the operation regimes of the nuclear high power facilities. Highlighted here are the thesis scope and the original features of the work. The second chapter deals with operational policies developed in order to ensure the preventive maintenance of the nuclear installations. Also managing structures are described devoted to practical warranting the equipment safety function of non-classical power stations. In the third chapter cases of nuclear accidents are analyzed especially stressing the probabilistic risk and the operation regimes having in view the elimination of catastrophic events. In the fourth and fifth chapters the control of nuclear radiation emission is treated focusing the quality issue of nuclear installations required to avoid hazardous effects at level of nuclear reactor operation stage. At the same time set of operational measures is given here for preventing risks, catastrophes and chaotic situations. The chapter five presents both theoretical and practical approaches of the nuclear reactor core management concerning particularly the fuel testing, the water primary system and the quality of the involved equipment. In the sixth and seventh chapters issues of risk-quality correlations are approached as well as the structure of expert systems for monitoring the operational regimes of nuclear facilities. The efficiency of the power systems with nuclear injection is discussed and some original ideas developed in this work are evidenced in the eighth and ninth chapters. Presented are here both the operational principles and models of raising the efficiency of the interconnected nuclear stations and prices' policy

  13. White-tailed deer age ratios as herd management and predator impact measures in Pennsylvania

    Science.gov (United States)

    Rosenberry, Christopher S.; Norton, Andrew S.; Diefenbach, Duane R.; Fleegle, Jeannine T.; Wallingford, Bret D.

    2011-01-01

    A review of the Pennsylvania Game Commission's (PGC) deer management program and public concern about predator impacts on deer (Odocoileus virginianus) populations compelled the PGC to investigate the role of age ratios in developing management recommendations. Age ratios, such as proportion of juveniles in the antlerless harvest, may provide an index to population productivity and predator impacts. We estimated proportion of juveniles in the antlerless harvest from hunter-killed deer, population trends using the Pennsylvania (USA) sex–age–kill model, and reproduction from road-killed females. Using these estimates and a simulation model, we concluded that no single age-ratio value would serve as a reliable measure of population status. Wildlife Management Unit-specific trends in proportion of juveniles in the antlerless harvest and population trends provided the most relevant management information. We also provide an example decision chart to guide management actions in response to declining age ratios in the harvest. Although predator management activities and juvenile survival studies are often desired by the public, our decision-chart example indicated a number of deer management options exist before investing resources in predator management activities and juvenile survival studies.

  14. Greening Federal Facilities: An Energy, Environmental, and Economic Resource Guide for Federal Facility Managers and Designers; Second Edition

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, A.

    2001-05-16

    Greening Federal Facilities, Second Edition, is a nuts-and-bolts resource guide compiled to increase energy and resource efficiency, cut waste, and improve the performance of Federal buildings and facilities. The guide highlights practical actions that facility managers, design and construction staff, procurement officials, and facility planners can take to save energy and money, improve the comfort and productivity of employees, and benefit the environment. It supports a national effort to promote energy and environmental efficiency in the nation's 500,000 Federal buildings and facilities. Topics covered include current Federal regulations; environmental and energy decision-making; site and landscape issues; building design; energy systems; water and wastewater; materials; waste management, and recycling; indoor environmental quality; and managing buildings.

  15. Tritium and ignition target management at the National Ignition Facility.

    Science.gov (United States)

    Draggoo, Vaughn

    2013-06-01

    Isotopic mixtures of hydrogen constitute the basic fuel for fusion targets of the National Ignition Facility (NIF). A typical NIF fusion target shot requires approximately 0.5 mmoles of hydrogen gas and as much as 750 GBq (20 Ci) of 3H. Isotopic mix ratios are specified according to the experimental shot/test plan and the associated test objectives. The hydrogen isotopic concentrations, absolute amounts, gas purity, configuration of the target, and the physical configuration of the NIF facility are all parameters and conditions that must be managed to ensure the quality and safety of operations. An essential and key step in the preparation of an ignition target is the formation of a ~60 μm thick hydrogen "ice" layer on the inner surface of the target capsule. The Cryogenic Target Positioning System (Cryo-Tarpos) provides gas handling, cyro-cooling, x-ray imaging systems, and related instrumentation to control the volumes and temperatures of the multiphase (solid, liquid, and gas) hydrogen as the gas is condensed to liquid, admitted to the capsule, and frozen as a single spherical crystal of hydrogen in the capsule. The hydrogen fuel gas is prepared in discrete 1.7 cc aliquots in the LLNL Tritium Facility for each ignition shot. Post-shot hydrogen gas is recovered in the NIF Tritium Processing System (TPS). Gas handling systems, instrumentation and analytic equipment, material accounting information systems, and the shot planning systems must work together to ensure that operational and safety requirements are met.

  16. Mixed Waste Management Facility (MWMF) groundwater monitoring report

    International Nuclear Information System (INIS)

    1993-03-01

    During fourth quarter 1992, nine constituents exceeded final Primary Drinking Water Standards (PDWS) in one or more groundwater samples from monitoring wells at the Mixed Waste Management Facility (MWMF) and adjacent facilities. As in previous quarters, tritium and trichloroethylene were the most widespread constituents. Fifty-seven (48%) of the 120 monitoring wells, contained elevated tritium activities, and 23 (19%) contained elevated trichloroethylene concentrations. Total alpha-emitting radium, tetrachloroethylene, chloroethene, cadmium, 1,1-dichloroethylene, lead, or nonvolatile beta levels exceeded standards in one or more wells. During 1992, elevated levels of 13 constituents were found in one or more of 80 of the 120 groundwater monitoring wells (67%) at the MWMF and adjacent facilities. Tritium and trichloroethylene exceeded their final PDWS more frequently and more consistently than did other constituents. Tritium activity exceeded its final PDWS m 67 wells and trichloroethylene was. elevated in 28 wells. Lead, tetrachloroethylene, total alpha-emitting radium, gross alpha, cadmium, chloroethene, 1,1-dichloroethylene 1,2-dichloroethane, mercury, or nitrate exceeded standards in one or more wells during the year. Nonvolatile beta exceeded its drinking water screening level in 3 wells during the year

  17. National ignition facility environment, safety, and health management plan

    International Nuclear Information System (INIS)

    1995-11-01

    The ES ampersand H Management Plan describes all of the environmental, safety, and health evaluations and reviews that must be carried out in support of the implementation of the National Ignition Facility (NIF) Project. It describes the policy, organizational responsibilities and interfaces, activities, and ES ampersand H documents that will be prepared by the Laboratory Project Office for the DOE. The only activity not described is the preparation of the NIF Project Specific Assessment (PSA), which is to be incorporated into the Programmatic Environmental Impact Statement for Stockpile Stewardship and Management (PEIS). This PSA is being prepared by Argonne National Laboratory (ANL) with input from the Laboratory participants. As the independent NEPA document preparers ANL is directly contracted by the DOE, and its deliverables and schedule are agreed to separately with DOE/OAK

  18. Organisation of facilities management in relation to core business

    DEFF Research Database (Denmark)

    Jensen, Per Anker

    2011-01-01

    Purpose: The purpose of this article is to clarify the organisational relationships between Facilities Management (FM) and core business and how these relationships vary for strategic and operational support functions. Approach: The research takes a starting point in Michael Porter’s theory...... as mainly a specific customer orientation. It is concluded that a market relationship – internally or externally – is appropriate for non-strategic functions, while it is important to create a kind of coalition between strategic FM functions and the core business management. Originality/value: The paper...... provides a theoretical and empirical based analysis of the organisation of FM in relation to core business. The proposed solution of creating a strategic coalition has not been suggested before in scientific literature, but a recent example in practice has occurred. This supports the proposal and shows its...

  19. Controlling changes - lessons learned from waste management facilities

    International Nuclear Information System (INIS)

    Johnson, B.M.; Koplow, A.S.; Stoll, F.E.; Waetje, W.D.

    1995-01-01

    This paper discusses lessons learned about change control at the Waste Reduction Operations Complex (WROC) and Waste Experimental Reduction Facility (WERF) of the Idaho National Engineering Laboratory (INEL). WROC and WERF have developed and implemented change control and an as-built drawing process and have identified structures, systems, and components (SSCS) for configuration management. The operations have also formed an Independent Review Committee to minimize costs and resources associated with changing documents. WROC and WERF perform waste management activities at the INEL. WROC activities include storage, treatment, and disposal of hazardous and mixed waste. WERF provides volume reduction of solid low-level waste through compaction, incineration, and sizing operations. WROC and WERF's efforts aim to improve change control processes that have worked inefficiently in the past

  20. Impacts of building information modeling on facility maintenance management

    Energy Technology Data Exchange (ETDEWEB)

    Ahamed, Shafee; Neelamkavil, Joseph; Canas, Roberto [Centre for Computer-assisted Construction Technologies, National Research Council of Canada, London, Ontario (Canada)

    2010-07-01

    Building information modeling (BIM) is a digital representation of the physical and functional properties of a building; it has been used by construction professionals for a long time and stakeholders are now using it in different aspects of the building lifecycle. This paper intends to present how BIM impacts the construction industry and how it can be used for facility maintenance management. The maintenance and operations of buildings are in most cases still managed through the use of drawings and spreadsheets although life cycle costs of a building are significantly higher than initial investment costs; thus, the use of BIM could help in achieving a higher efficiency and so important benefits. This study is part of an ongoing research project, the nD modeling project, which aims at predicting building energy consumption with better accuracy.

  1. Introducing Systematic Aging Management for Interim Storage Facilities in Germany

    International Nuclear Information System (INIS)

    Spieth-Achtnich, Angelika; Schmidt, Gerhard

    2014-01-01

    In Germany twelve at-reactor and three central (away from reactor) dry storage facilities are in operation, where the fuel is stored in combined transport-and-storage casks. The safety of the storage casks and facilities has been approved and is licensed for up to 40 years operating time. If the availability of a final disposal facility for the stored wastes (spent fuel and high-level wastes from reprocessing) will be further delayed the renewal of the licenses can become necessary in future. Since 2001 Germany had a regulatory guideline for at-reactor dry interim storage of spent fuel. In this guideline some elements of ageing were implemented, but no systematic approach was made for a state-of-the-art ageing management. Currently the guideline is updated to include all kind of storage facilities (central storages as well) and all kinds of high level waste (also waste from reprocessing). Draft versions of the update are under discussion. In these drafts a systematic ageing management is seen as an instrument to upgrade the available technical knowledge base for possible later regulatory decisions, should it be necessary to prolong storage periods to beyond the currently approved limits. It is further recognized as an instrument to prevent from possible and currently unrecognized ageing mechanisms. The generation of information on ageing can be an important basis for the necessary safety-relevant verifications for long term storage. For the first time, the demands for a systematic monitoring of ageing processes for all safety-related components of the storage system are described. In addition, for inaccessible container components such as the seal system, the neutron shielding, the baskets and the waste inventory, the development of a monitoring program is recommended. The working draft to the revised guideline also contains recommendations on non-technical ageing issues such as the long-term preservation of knowledge, long term personnel planning and long term

  2. Risk management plan for the National Ignition Facility

    International Nuclear Information System (INIS)

    Brereton, S.; Lane, M.; Smith, C.; Yatabe, J.

    1998-01-01

    The National Ignition Facility (NIF) is a U.S. Department of Energy inertial confinement laser fusion facility, currently under construction at the Lawrence Livermore National Laboratory (LLNL). NIF is a critical tool for the Department of Energy (DOE) science- based Stockpile Stewardship and Management Program. In addition, it represents a major step towards realizing inertial confinement fusion as a source of energy. The NIF will focus 192 laser beams onto spherical targets containing a mixture of deuterium and tritium, causing them to implode. This will create the high temperatures and pressures necessary for these targets to undergo fusion. The plan is for NIF to achieve ignition (i.e., self-heating of the fuel) and energy gain (i.e., more fusion energy produced than laser energy deposited) in the laboratory for the first time. A Risk Management Plan was prepared for the NIF design and construction Project. The plan was prepared in accordance with the DOE Life Cycle Asset Management Good Practice Guide. The objectives of the plan were to: (1) identify the risks to the completion of the Project in terms of meeting technical and regulatory requirements, cost, and schedule, (2) assess the risks in terms of likelihood of occurrence and their impact potential relative to technical performance, ES ampersand H (environment, safety and health), costs, and schedule, and (3) address each risk in terms of suitable risk management measures. Major risk elements were identified for the NIF Project. A risk assessment methodology was developed, which was utilized to rank the Project risks with respect to one another. Those elements presenting greater risk were readily identified by this process. This paper describes that methodology and the results

  3. Strategic sourcing and procurement of facilities management services

    DEFF Research Database (Denmark)

    Jensen, Per Anker

    2017-01-01

    Purpose: The purpose it to provide insights into strategic sourcing concerning Facilities Management (FM) and how it can contribute to a sourcing decision that combines the benefits of internal and external provision with consideration of business risk and cost. Design/methodology/approach: The p......Purpose: The purpose it to provide insights into strategic sourcing concerning Facilities Management (FM) and how it can contribute to a sourcing decision that combines the benefits of internal and external provision with consideration of business risk and cost. Design....../methodology/approach: The paper investigates a strategic sourcing and procurement process in a large public organisation in Denmark based on participating in internal meetings, a workshop, document studies and interviews. The process is compared to a new ISO standard with guidance on strategic sourcing and development of FM...... the organisation decided to change the sourcing strategy with insourcing the most critical building related activities and changing the procurement strategy from one integrated FM contract to 3 bundled and 7 single service contracts. The concept of right-sourcing is discussed. Research limitations...

  4. Effects of management practices on grassland birds: Nelson's Sharp-tailed Sparrow

    Science.gov (United States)

    Dechant, Jill A.; Sondreal, Marriah L.; Johnson, Douglas H.; Igl, Lawrence D.; Goldade, Christopher M.; Rabie, Paul A.; Euliss, Betty R.

    2002-01-01

    Information on the habitat requirements and effects of habitat management on grassland birds were summarized from information in more than 5,500 published and unpublished papers. A range map is provided to indicate the relative densities of the species in North America, based on Breeding Bird Survey (BBS) data. Although birds frequently are observed outside the breeding range indicated, the maps are intended to show areas where managers might concentrate their attention. It may be ineffectual to manage habitat at a site for a species that rarely occurs in an area. The species account begins with a brief capsule statement, which provides the fundamental components or keys to management for the species. A section on breeding range outlines the current breeding distribution of the species in North America, including areas that could not be mapped using BBS data. The suitable habitat section describes the breeding habitat and occasionally microhabitat characteristics of the species, especially those habitats that occur in the Great Plains. Details on habitat and microhabitat requirements often provide clues to how a species will respond to a particular management practice. A table near the end of the account complements the section on suitable habitat, and lists the specific habitat characteristics for the species by individual studies. A special section on prey habitat is included for those predatory species that have more specific prey requirements. The area requirements section provides details on territory and home range sizes, minimum area requirements, and the effects of patch size, edges, and other landscape and habitat features on abundance and productivity. It may be futile to manage a small block of suitable habitat for a species that has minimum area requirements that are larger than the area being managed. The Brown-headed Cowbird (Molothrus ater) is an obligate brood parasite of many grassland birds. The section on cowbird brood parasitism summarizes rates

  5. 41 CFR 102-74.155 - What energy conservation policy must Federal agencies follow in the management of facilities?

    Science.gov (United States)

    2010-07-01

    ... policy must Federal agencies follow in the management of facilities? 102-74.155 Section 102-74.155 Public... MANAGEMENT REGULATION REAL PROPERTY 74-FACILITY MANAGEMENT Facility Management Energy Conservation § 102-74.155 What energy conservation policy must Federal agencies follow in the management of facilities...

  6. The mixed waste management facility: Cost-benefit for the Mixed Waste Management Facility at Lawrence Livermore National Laboratory

    International Nuclear Information System (INIS)

    Brinker, S.D.; Streit, R.D.

    1996-04-01

    The Mixed Waste Management Facility, or MWMF, has been proposed as a national testbed facility for the demonstration and evaluation of technologies that are alternatives to incineration for the treatment of mixed low-level waste. The facility design will enable evaluation of technologies at pilot scale, including all aspects of the processes, from receiving and feed preparation to the preparation of final forms for disposal. The MWMF will reduce the risk of deploying such technologies by addressing the following: (1) Engineering development and scale-up. (2) Process integration and activation of the treatment systems. (3) Permitting and stakeholder issues. In light of the severe financial constraints imposed on the DOE and federal programs, DOE/HQ requested a study to assess the cost benefit for the MWMF given other potential alternatives to meet waste treatment needs. The MVVMF Project was asked to consider alternatives specifically associated with commercialization and privatization of the DOE site waste treatment operations and the acceptability (or lack of acceptability) of incineration as a waste treatment process. The result of this study will be one of the key elements for a DOE decision on proceeding with the MWMF into Final Design (KD-2) vs. proceeding with other options

  7. Comparison of TEAR and TFRC throughput for Drop tail and RED Queue Management Techniques

    Directory of Open Access Journals (Sweden)

    Parminderjeet Singh

    2014-12-01

    Full Text Available The comparison of throughput for TEAR (TCP emulation at receivers and TFRC TCP friendly rate control in MANETs is done with varying Active queue Management Techniques. The analysis reveals that for bandwidth constraint links, TEAR and TFRC perform far better than normal traffic propagation through TCP. In case of TEAR, the processing and route congestion algorithm load is shared by the receiver resulting in lesser load at the transmitters. In TFRC the TCP traffic is propagated via an algorithm to curb acknowledgement congestions. The effect of these two techniques is monitored on Droptail and RED, two of the most common Active Queue Management Techniques.

  8. National Ignition Facility and managing location, component, and state

    International Nuclear Information System (INIS)

    Foxworthy, Cemil; Fung, Tracy; Beeler, Rich; Li, Joyce; Dugorepec, Jasna; Chang, Cathy

    2012-01-01

    Highlights: ► NIF in comprised of over 100k serialized parts that must be tracked and maintained. ► We discuss a web-based integrated parts management system designed for NIF. ► The parts database stores associated calibration data with effective dates. ► The system interfaces with the NIF control system and performance models. ► Work activity (Permits, Problem Logs, Work Orders) are managed by the system. - Abstract: The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory is a stadium-sized facility that contains a 192-beam, 1.8-MJ, 500-TW, ultraviolet laser system coupled with a 10-m diameter target chamber. There are over 6200 Line Replaceable Units (LRUs) comprised of more than 104,000 serialized parts that make up the NIF. Each LRU is a modular unit typically composed of a mechanical housing, laser optics (glass, lenses, or mirrors), and utilities. To date, there are more than 120,000 data sets created to characterize the attributes of these parts. Greater than 51,000 Work Permits have been issued to install, maintain, and troubleshoot the components. One integrated system is used to manage these data, and more. The Location Component and State (LoCoS) system is a web application built using Java Enterprise Edition technologies and is accessed by over 1200 users. It is either directly or indirectly involved with each aspect of NIF work activity, and interfaces with ten external systems including the Integrated Computer Control System (ICCS) and the Laser Performance Operations Model (LPOM). Besides providing business functionality, LoCoS also acts as the NIF enterprise service bus. In this role, numerous integration approaches had to be adopted including: file exchange, database sharing, queuing, and web services in order to accommodate various business, technical, and security requirements. Architecture and implementation decisions are discussed.

  9. WIPP Facility Work Plan for Solid Waste Management Units

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2000-02-25

    This Facility Work Plan (FWP) has been prepared as required by Module VII,Section VII.M.1 of the Waste Isolation Pilot Plant (WIPP) Hazardous Waste Permit, NM4890139088-TSDF (the Permit); (NMED, 1999a). This work plan describes the programmatic facility-wide approach to future investigations at Solid Waste Management Units (SWMUs) and Areas of Concern (AOCs) specified in the Permit. This FWP addresses the current Permit requirements. It uses the results of previous investigations performed at WIPP and expands the investigations as required by the Permit. As an alternative to the Resource Conservation and Recovery Act (RCRA) Facility Investigation (RFI) specified in Module VII of the Permit, current New Mexico Environment Department (NMED) guidance identifies an Accelerated Corrective Action Approach (ACAA) that may be used for any SWMU or AOC (NMED, 1998). This accelerated approach is used to replace the standard RFI Work Plan and Report sequence with a more flexible decision-making approach. The ACAA process allows a Facility to exit the schedule of compliance contained in the Facility’s Hazardous and Solid Waste Amendments (HSWA) permit module and proceed on an accelerated time frame. Thus, the ACAA process can be entered either before or after an RFI Work Plan. According to NMED’s guidance, a facility can prepare an RFI Work Plan or Sampling and Analysis Plan (SAP) for any SWMU or AOC (NMED, 1998). Based on this guidance, a SAP constitutes an acceptable alternative to the RFI Work Plan specified in the Permit. The scope of work for the RFI Work Plan or SAP is being developed by the Permittees. The final content of the RFI Work Plan or SAP will be coordinated with the NMED for submittal on May 24, 2000. Specific project-related planning information will be included in the RFI Work Plan or SAP. The SWMU program at WIPP began in 1994 under U.S. Environmental Protection Agency (EPA) regulatory authority. NMED subsequently received regulatory authority from EPA

  10. An assessment of the long term suitability of present and proposed methods for the management of uranium mill tailings

    International Nuclear Information System (INIS)

    1979-07-01

    Proposals for safe, long-term containment of conventional tailings include 1) storage under water, 2) storage in active, abandoned or specially created underground mines and, 3) storage in open pits, with subsequent flooding or covering with overburden. The underwater proposal can meet most of the requirements of long term containment; however, extensive study of existing tailings deposits in deep water locations will be needed. Underground mines cannot provide sufficient storage capacity, since the tailings bulk during mill operation can occupy twice the volume of the original ore. It is possible to reduce the hazard by reducing the radium and thorium content of the tailings. Proposals for such an undertaking include ore beneficiation with rejection of the relatively innocuous fraction, radium-thorium removal in the mill, and significant changes in both ore processing and treatment of tailings. It is concluded that surface-stored tailings are vulnerable over the long term to dispersion by leaching and water erosion, and that access to a tailings site cannot be prevented, while only a major climatic or seismic event could disturb tailings stored in suitable underwater or underground mine sites. The criteria for determining suitability for each method, however, will need to be identified, tested, and accepted through the normal process of modeling, pilot plant evaluation, monitoring and evaluation. (author)

  11. Facilities Management and Corporate Real Estate Management as Value Drivers: How to Manage and Measure Adding Value

    DEFF Research Database (Denmark)

    Facilities Management (FM) and Corporate Real Estate Management (CREM) are two closely related and relatively new management disciplines with developing international professions and increasing academic attention. Both disciplines have from the outset a strong focus on controlling and reducing cost...... for real estate, facilities and related services. In recent years there has been a change towards putting more focus on how FM/CREM can add value to the organisation. The book is research based with a focus on guidance to practice. It offers a transdisciplinary approach, integrating academic knowledge from...

  12. National Ignition Facility risk management plan, rev. 1

    International Nuclear Information System (INIS)

    Brereton, S J; Lane, M A

    1998-01-01

    The initial release of the National Ignition Facility (AUF) Risk Management Plan (LLNL, 1997a) was prepared in accordance with the DOE Life Cycle Asset Management Good Practice Guide (DOE, 1996a) and supported Critical Decision 3 (CD3), Approval to Initiate Construction (DOE, 1997a). The objectives of the plan were to: (1) Identify the risks to the completion of the Project in terms of meeting technical and regulatory requirements, cost, and schedule. (2) Assess the risks in terms of likelihood of occurrence and their impact potential relative to technical performance, ES and H (environmental, safety and health), costs, and schedule. (3) Address suitable risk mitigation measures for each identified risk. This revision of the Risk Management Plan considers project risks and vulnerabilities after CD3 (DOE, 1997a) was approved by the Secretary of Energy. During the one-year period since the initial release, the vulnerabilities of greatest concern have been the litigation of the Programmatic Environmental Impact Statement (PEIS) (DOE, 1996b) by a group of environmental organizations led by the Natural Resources Defense Council; the finding and successful clean-up of polychlorinated biphenyl (PCB)-filled electrical capacitors at the NIF site excavation; the FY98 congressional budget authorization and request for the FY99 budget authorization; funding for Inertial Confinement Fusion (ICF)/NIF programmatic activities (including French and other sources of funding); and finally, progress in the core science and technology, and optics program that form the basis for the NIF design

  13. National Ignition Facility and Managing Location, Component, and State

    International Nuclear Information System (INIS)

    Foxworthy, C.; Fung, T.; Beeler, R.; Li, J.; Dugorepec, J.; Chang, C.

    2011-01-01

    The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory is a stadium-sized facility that contains a 192-beam, 1.8-Megajoule, 500-Terawatt, ultraviolet laser system coupled with a 10-meter diameter target chamber. There are over 6,200 Line Replaceable Units (LRUs) comprised of more than 104,000 serialized parts that make up the NIF. Each LRU is a modular unit typically composed of a mechanical housing, laser optics (glass, lenses, or mirrors), and utilities. To date, there are more than 120,000 data sets created to characterize the attributes of these parts. Greater than 51,000 Work Permits have been issued to install, maintain, and troubleshoot the components. One integrated system is used to manage these data, and more. The Location Component and State (LoCoS) system is a web application built using Java Enterprise Edition technologies and is accessed by over 1,200 users. It is either directly or indirectly involved with each aspect of NIF work activity, and interfaces with ten external systems including the Integrated Computer Control System (ICCS) and the Laser Performance Operations Model (LPOM). Besides providing business functionality, LoCoS also acts as the NIF enterprise service bus. In this role, numerous integration approaches had to be adopted including: file exchange, database sharing, queuing, and web services in order to accommodate various business, technical, and security requirements. Architecture and implementation decisions are discussed.

  14. National Ignition Facility and Managing Location, Component, and State

    Energy Technology Data Exchange (ETDEWEB)

    Foxworthy, C; Fung, T; Beeler, R; Li, J; Dugorepec, J; Chang, C

    2011-07-25

    The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory is a stadium-sized facility that contains a 192-beam, 1.8-Megajoule, 500-Terawatt, ultraviolet laser system coupled with a 10-meter diameter target chamber. There are over 6,200 Line Replaceable Units (LRUs) comprised of more than 104,000 serialized parts that make up the NIF. Each LRU is a modular unit typically composed of a mechanical housing, laser optics (glass, lenses, or mirrors), and utilities. To date, there are more than 120,000 data sets created to characterize the attributes of these parts. Greater than 51,000 Work Permits have been issued to install, maintain, and troubleshoot the components. One integrated system is used to manage these data, and more. The Location Component and State (LoCoS) system is a web application built using Java Enterprise Edition technologies and is accessed by over 1,200 users. It is either directly or indirectly involved with each aspect of NIF work activity, and interfaces with ten external systems including the Integrated Computer Control System (ICCS) and the Laser Performance Operations Model (LPOM). Besides providing business functionality, LoCoS also acts as the NIF enterprise service bus. In this role, numerous integration approaches had to be adopted including: file exchange, database sharing, queuing, and web services in order to accommodate various business, technical, and security requirements. Architecture and implementation decisions are discussed.

  15. Waste Management Effluent Treatment Facility: Phase I. CAC basic data

    International Nuclear Information System (INIS)

    Gemar, D.W.; O'Leary, C.D.

    1984-01-01

    In order to expedite design and construction of the Waste Management Effluent Treatment Facility (WMETF), the project has been divided into two phases. Phase I consists of four storage basins and the associated transfer lines, diversion boxes, and control rooms. The design data pertaining to Phase I of the WMETF project are presented together with general background information and objectives for both phases. The project will provide means to store and decontaminate wastewater streams that are currently discharged to the seepage basins in F Area and H Area. This currently includes both routine process flows sent directly to the seepage basins and diversions of contaminated cooling water or storm water runoff that are stored in the retention basins before being pumped to the seepage basins

  16. Comprehensive safety cases for radioactive waste management facilities

    International Nuclear Information System (INIS)

    Woollam, P.B.; Cameron, H.M.; Davies, A.R.; Hiscox, A.W.

    1995-01-01

    Probabilistic safety assessment methodology has been applied by Nuclear Electric plc (NE) to the development of comprehensive safety cases for the radioactive waste management processing and accumulation facilities associated with its 26 reactor systems. This paper describes the methodology and the safety case assessment criteria employed by NE. An overview of the results is presented, together with more detail of a specific safety analysis: storage of fuel element debris. No risk to the public greater than 10 -6 /y has been identified and the more significant risks arise from the potential for radioactive waste fires. There are no unacceptable risks from external hazards such as flooding, aircrash or seismic events. Some operations previously expected to have significant risks in fact have negligible risks, while the few faults with risks exceeding the assessment criteria were only identified as a result of this study

  17. Sustainability in facilities management: an overview of current research

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Sarasoja, Anna-Liisa; Ramskov Galamba, Kirsten

    2016-01-01

    the emerging sub-discipline of sustainable facilities management (SFM) on research, an overview of current studies is needed. The purpose of this literature review is to provide exactly this overview. Design/methodology/approach: This article identifies and examines current research studies on SFM through...... a comprehensive and systematic literature review. The literature review included screening of 85 identified scientific journals and almost 20,000 articles from the period of 2007-2012. Of the articles reviewed, 151 were identified as key articles and categorised according to topic. Findings: The literature review...... indicated that the current research varies in focus, methodology and application of theory, and it was concluded that the current research primary addresses environmental sustainability, whereas the current research which takes an integrated strategic approach to SFM is limited. The article includes lists...

  18. Information Technology in Facilities Management - A Literature Review

    DEFF Research Database (Denmark)

    Ebbesen, Poul

    2015-01-01

    Purpose : The aim of this paper is to present the state of the art of research in Information Technology (IT) in Facilities Management (FM). Background : Initial studies indicate that investments into IT in FM often do not add the expected value, neither to the FM department itself nor...... on IT in FM were found. Relevant articles were organized in categories according to focus on 1. technology, 2. IT layer, 3. FM process, 4. theory and research method applied, and 5. type of findings. Finally research gaps were identified. Results and practical implications : There seems to be a general belief...... in technology combinations as a way to speed up the rather slow IT diffusion process in FM. It is documented that current research into IT in FM has an unbalanced focus on few specific technologies, IT layers and FM processes, and that further research should focus more on the IT implementation process and use...

  19. Managing risks during the construction of a power generation facility

    International Nuclear Information System (INIS)

    Loulakis, M.C.

    1992-01-01

    The construction of a power generation facility is a substantial undertaking that involves considerable risks to all parties involved. While contractors are accustomed to dealing with risks, construction owners are typically more naive about not only the risks they are assuming in the construction of a project, but also about the role they play on the project itself. Owners and developers of power facilities must understand at the outset that their role during the construction of a project is as integral to the success of the project as that of the designer and contractor. In addition, owners should also understand that there are virtually no risks on a construction project that cannot be shifted among the contracting parties as part of the business deal. Consequently, an owner may contractually be assuming the risks of (1) unusually severe weather, (2) unexpected subsurface conditions, (3) strikes at the turbine supplier's plant or (4) changes in law - as well as the increases in price and delays to project completion associated with such risks. In light of this, a prudent owner will evaluate more than just whether there is sufficient financing to complete the construction of a contemplated project. Prudent owners will conduct a risk management review of the project structure and the contracting terms, with the primary focus being (1) the identification and analysis of the most significant risks faced, (2) a determination of how such risks can be either mitigated or eliminated, and (3) the assessment of the financial exposure to the owner should the potential risk become a reality. This paper will present the framework that owners and developers of power generation projects can use in undertaking such a risk management review

  20. An approach to the calculation of dose commitment arising from different methods for the long-term management of uranium mill tailings

    International Nuclear Information System (INIS)

    1983-07-01

    This report describes the development and use of a diagnostic model designed to improve our understanding of the release of radionuclides to the natural environment from uranium mill tailings management areas. The study first developed the characteristics of a hypothetical tailings management area such that a variety of management alternatives could be studied using simulation modelling techniques. Factors describing climate and the surrounding environment were fixed and the simulation model was run to predict releases from the tailings site over time periods of thousands of years. Simulation runs were carried out for a series of six major management alternatives ranging from old abandoned practices through currently accepted practices to as yet to be proven management techniques. This summary report describes the major aspects of the diagnostic model and the findings obtained through its use. The report does not attempt to predict doses or radionuclide dispersal patterns for any specific site, existing or planned. A more complete technical discussion of the model may be found in the two technical appendices associated with this report INFO--0097 (app.A.) and INFO--0097 (app.B)

  1. Managing Human Performance to Improve Nuclear Facility Operation

    International Nuclear Information System (INIS)

    2013-01-01

    . It describes how human performance can be managed within an overall performance improvement model. The need for IAEA involvement in this area and to address key issues highlighted in IAEA Nuclear Energy Series No. NG-G-2.1 were reinforced during the meetings of the Technical Working Group on Managing Human Resources in the Field of Nuclear Energy (TWG-MHR) in 2008 and 2010. The importance of human performance in the safe operation of any nuclear facility is no longer in doubt. The contribution of human performance to the occurrence of significant events and, consequently, to overall performance in the nuclear field has been well documented. Monitoring and continually improving human performance has now become one of the key challenges in the management of human resources for nuclear facilities. To facilitate meeting the challenge of improving human performance, a model of performance improvement is presented that provides a framework which can be used to improve individual, process and organizational performance. It is generally postulated that without human performance improvement, a safe working environment is impossible to maintain. While there are many different perspectives from which safety issues might be addressed, there are several factors significant for human performance improvement that are consistent, useful and necessary to understand. This publication is not intended as an all encompassing guide to managing human performance, but, rather, provides a summary of concepts and good practices for organizations to consider in their design of various programmes and in the performance of activities. In addition, tools that are helpful for managing human performance are discussed, and references for more detailed information on these concepts and tools are provided

  2. Arsenic readily released to pore waters from buried mill tailings

    International Nuclear Information System (INIS)

    Mahoney, John; Langmuir, Donald; Gosselin, Neil; Rowson, John

    2005-01-01

    At the McClean Lake Operation in the Athabasca Basin of northern Saskatchewan, the untreated acid raffinate solutions associated with U mill tailings contain up to 700 mg/L dissolved As. To reduce the concentration of As and other contaminants in acid tailing slurries at the JEB mill at McClean Lake, ferric sulfate may be added to the acid raffinates to assure that their molar Fe/As ratio equals or exceeds 3. Tailings slurries are then neutralized with lime to pH 4, and subsequently to pH 7-8. The neutralized tailings contain minerals from the original ore, which are chiefly quartz, illite, kaolinite and chlorite, and precipitated (secondary) minerals that include gypsum, scorodite, annabergite, hydrobasaluminite and ferrihydrite. Most of the As is associated with the secondary arsenate minerals, scorodite and annabergite. However, a few percent is adsorbed and/or co-precipitated, mainly by ferrihydrite. Of major concern to provincial and federal regulators is the risk that significant amounts of As might be released from the tailings to pore waters after their subaqueous disposal in the tailings management facility. A laboratory study was performed to address this issue, measuring readily desorbed As using a method known as equilibrium partitioning in closed systems (EPICS). The EPICS method was selected because it employs a leaching solution that, except for its As concentration, is identical in composition to the neutralized raffinate in contact with the tailings. Laboratory experiments and modeling results demonstrated that the As that could be readily released to pore waters is about 0.2% of the total As in the tailings. Long-term, such releases may contribute no more than a few mg/L of dissolved As to tailings pore waters

  3. Risk management study for the retired Hanford Site facilities: Risk management executive summary

    International Nuclear Information System (INIS)

    Coles, G.A.; Shultz, M.V.; Taylor, W.E.

    1994-02-01

    This document provides a cost-comparison evaluation for implementing certain risk-reduction measures and their effect on the overall risk of the 100 and 200 Area retired, surplus facilities. The evaluation is based on conditions that existed at the time the risk evaluation team performed facility investigations, and does not acknowledge risk-reduction measures that occurred soon after risk identification. This evaluation is one part of an overall risk management study for these facilities. The retired facilities investigated for this evaluation are located in the 100 and 200 Areas of the 1450-km 2 Hanford Site. The Hanford Site is a semiarid tract of land in southeastern Washington State. The nearest population center is Richland, Washington, (population 32,000) 30 km southeast of the 200 Area. This document is the first in a four volume series that comprise the risk management study for the retired, surplus facilities. Volume 2 is the risk evaluation work procedure; volume 3 provides the results for the risk evaluation; and volume 4 is the risk-reduction cost comparison

  4. 25 CFR 170.806 - What is an IRR Transportation Facilities Maintenance Management System?

    Science.gov (United States)

    2010-04-01

    ... Management System? 170.806 Section 170.806 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM BIA Road Maintenance § 170.806 What is an IRR Transportation Facilities Maintenance Management System? An IRR Transportation Facilities Maintenance Management...

  5. A distributed data base management facility for the CAD/CAM environment

    Science.gov (United States)

    Balza, R. M.; Beaudet, R. W.; Johnson, H. R.

    1984-01-01

    Current/PAD research in the area of distributed data base management considers facilities for supporting CAD/CAM data management in a heterogeneous network of computers encompassing multiple data base managers supporting a variety of data models. These facilities include coordinated execution of multiple DBMSs to provide for administration of and access to data distributed across them.

  6. 77 FR 55843 - Office of Facilities Management and Program Services; Submission for OMB Review; Background...

    Science.gov (United States)

    2012-09-11

    ... ADMINISTRATION Office of Facilities Management and Program Services; Submission for OMB Review; Background Investigations for Child Care Workers AGENCY: Office of Facilities Management and Program Services, Public... Act, the Regulatory Secretariat will be submitting to the Office of Management and Budget (OMB) a...

  7. Field Research Facility Data Integration Framework Data Management Plan: Survey Lines Dataset

    Science.gov (United States)

    2016-08-01

    ER D C/ CH L SR -1 6- 4 Coastal Ocean Data Systems Program Field Research Facility Data Integration Framework Data Management Plan...Systems Program ERDC/CHL SR-16-4 August 2016 Field Research Facility Data Integration Framework Data Management Plan Survey Lines Dataset Michael F...TITLE AND SUBTITLE Field Research Facility Data Integration Framework Data Management Plan: Survey Lines Dataset 5a. CONTRACT NUMBER 5b. GRANT NUMBER

  8. Planning and managing future space facility projects. [management by objectives and group dynamics

    Science.gov (United States)

    Sieber, J. E.; Wilhelm, J. A.; Tanner, T. A.; Helmreich, R. L.; Burgenbauch, S. F.

    1979-01-01

    To learn how ground-based personnel of a space project plan and organize their work and how such planning and organizing relate to work outcomes, longitudinal study of the management and execution of the Space Lab Mission Development Test 3 (SMD 3) was performed at NASA Ames Research Center. A view of the problems likely to arise in organizations and some methods of coping with these problems are presented as well as the conclusions and recommendations that pertain strictly to SMD 3 management. Emphasis is placed on the broader context of future space facility projects and additional problems that may be anticipated. A model of management that may be used to facilitate problem solving and communication - management by objectives (MBO) is presented. Some problems of communication and emotion management that MBO does not address directly are considered. Models for promoting mature, constructive and satisfying emotional relationships among group members are discussed.

  9. The management of carbon-14 in Canadian nuclear facilities

    International Nuclear Information System (INIS)

    1995-07-01

    In Canada, Derived Emission Limits (DELs) for the release of radionuclides from nuclear facilities are set to ensure that the dose to a member of a critical group from one year's release does not exceed the limit on annual dose to a member of the public set by the Atomic Energy Control Regulations. The Advisory Committee on Radiological Protection (ACRP) has expressed concerns as to whether this procedure provides adequate protection to members of the public, including future generations, for certain radionuclides such as a carbon-14 ( 14 C), which can accumulate in the environment and which can be dispersed, through environmental processes, beyond the local region where the critical group is assumed to live. The ACRP subsequently established a Working Group to review the production, release, environmental levels, and waste management of 14 C arising in CANDU power reactors. The ACRP recommendations resulting from this review can be summarized as · Given the current levels of emissions from CANDU nuclear power stations resulting from the use of a carbon dioxide annulus gas and the limitations in the calculation and use of collective dose, the ACRP sees no need for and additional collective dose limit to be applied to these sources. · The AECB should require licensees of power reactors and waste management sites to provide an annual inventory of 14 C held within reactor buildings and waste management sites; to provide information on the stability of the ion exchange resins and their continuing ability to retain the 14 C; to demonstrate on an ongoing basis that releases of 14 C are maintained at a small fraction of the emission limits; and to report annually the critical group and local collective doses arising from releases of 14 C. 61 refs., 25 tabs., 4 figs

  10. Predisposal Management of Radioactive Waste from Nuclear Fuel Cycle Facilities. Specific Safety Guide

    International Nuclear Information System (INIS)

    2016-01-01

    This Safety Guide provides guidance on the predisposal management of all types of radioactive waste (including spent nuclear fuel declared as waste and high level waste) generated at nuclear fuel cycle facilities. These waste management facilities may be located within larger facilities or may be separate, dedicated waste management facilities (including centralized waste management facilities). The Safety Guide covers all stages in the lifetime of these facilities, including their siting, design, construction, commissioning, operation, and shutdown and decommissioning. It covers all steps carried out in the management of radioactive waste following its generation up to (but not including) disposal, including its processing (pretreatment, treatment and conditioning). Radioactive waste generated both during normal operation and in accident conditions is considered

  11. Materials and Fuels Complex Facilities Radioactive Waste Management Basis and DOE Manual 435.1-1 Compliance Tables

    International Nuclear Information System (INIS)

    Harvego, Lisa; Bennett, Brion

    2011-01-01

    Department of Energy Order 435.1, 'Radioactive Waste Management,' along with its associated manual and guidance, requires development and maintenance of a radioactive waste management basis for each radioactive waste management facility, operation, and activity. This document presents a radioactive waste management basis for Idaho National Laboratory's Materials and Fuels Complex facilities that manage radioactive waste. The radioactive waste management basis for a facility comprises existing laboratory-wide and facility-specific documents. Department of Energy Manual 435.1-1, 'Radioactive Waste Management Manual,' facility compliance tables also are presented for the facilities. The tables serve as a tool for developing the radioactive waste management basis.

  12. Materials and Security Consolidation Complex Facilities Radioactive Waste Management Basis and DOE Manual 435.1-1 Compliance Tables

    International Nuclear Information System (INIS)

    2011-01-01

    Department of Energy Order 435.1, 'Radioactive Waste Management,' along with its associated manual and guidance, requires development and maintenance of a radioactive waste management basis for each radioactive waste management facility, operation, and activity. This document presents a radioactive waste management basis for Idaho National Laboratory's Materials and Security Consolidation Center facilities that manage radioactive waste. The radioactive waste management basis for a facility comprises existing laboratory-wide and facility-specific documents. Department of Energy Manual 435.1-1, 'Radioactive Waste Management Manual,' facility compliance tables also are presented for the facilities. The tables serve as a tool for developing the radioactive waste management basis.

  13. Managing highly flexible facilities: an essential complementary asset at risk

    NARCIS (Netherlands)

    Tierney, Robert; Tierney, R.; Groen, Arend J.; Harms, Rainer; Luizink, M.; Hetherington, D.; Steward, H.; Walsh, Steven Thomas; Linton, Jonathan; Linton, J.D.

    2012-01-01

    Purpose: Twenty first century problems are increasingly being addressed by multi technology solutions developed by regional entrepreneurial and intreprepreneurial innovators. However, they require an expensive new type of fabrication facility. Multiple technology production facilities (MTPF) have

  14. Evaluation of a wild white-tailed deer population management program for controlling chronic wasting disease in Illinois, 2003-2008.

    Science.gov (United States)

    Mateus-Pinilla, Nohra; Weng, Hsin-Yi; Ruiz, Marilyn O; Shelton, Paul; Novakofski, Jan

    2013-07-01

    We evaluated population management programs for controlling chronic wasting disease (CWD) in wild white-tailed deer in Illinois between November 2002 and March 2008. The intervention consisted of measures of deer removal from three deer population control programs: Illinois Department of Natural Resources culling, deer population control permits and nuisance deer removal permits. We included in the analysis a total of 14,650 white-tailed deer CWD test results. These data also included location and demographic data collected from both deer harvested in the interventions as well as deer from hunter harvests and deer vehicle collisions. We quantified intervention pressures as the number of years of intervention, the total number of deer removed and the average number of deer removed per year. We accounted for temporal and spatial variations of intervention by using mixed logistic regression to model the association between intervention pressures and CWD prevalence change. The results showed that deer population management intervention as practiced in Illinois during the study period was negatively associated with CWD prevalence and the strength of association varied depending on age of deer and the measure of intervention pressure. The population management programs showed a more consistent association with reduced CWD prevalence in fawn and yearling white-tailed deer than in adult deer. Our results also suggested that frequent and continuing intervention events with at least moderate intensity of culling were needed to reduce CWD prevalence. A longer study period, however, is needed to make a more definite conclusion about the effectiveness of similar population management programs for controlling CWD in wild white-tailed deer. Copyright © 2013 Elsevier B.V. All rights reserved.

  15. Conceptual design of an in-space cryogenic fluid management facility, executive summary

    Science.gov (United States)

    Willen, G. S.; Riemer, D. H.; Hustvedt, D. C.

    1981-01-01

    The conceptual design of a Spacelab experiment to develop the technology associated with low gravity propellant management is summarized. The preliminary facility definition, conceptual design and design analysis, and facility development plan, including schedule and cost estimates for the facility, are presented.

  16. Waste receiving and processing facility module 1 data management system software project management plan

    International Nuclear Information System (INIS)

    Clark, R.E.

    1994-01-01

    This document provides the software development plan for the Waste Receiving and Processing (WRAP) Module 1 Data Management System (DMS). The DMS is one of the plant computer systems for the new WRAP 1 facility (Project W-026). The DMS will collect, store, and report data required to certify the low level waste (LLW) and transuranic (TRU) waste items processed at WRAP 1 as acceptable for shipment, storage, or disposal

  17. Investigating the Optimal Management Strategy for a Healthcare Facility Maintenance Program

    National Research Council Canada - National Science Library

    Gaillard, Daria

    2004-01-01

    ...: strategic partnering with an equipment management firm. The objective of this study is to create a decision-model for selecting the optimal management strategy for a healthcare organization's facility maintenance program...

  18. Development techniques of computerized maintenance management system for nuclear fuel cycle examination facilities

    International Nuclear Information System (INIS)

    Oh, Yon Woo; Kim, S. D.; Soong, W. S.; Kim, G. H.; Oh, W. H.; Kim, Y. G.

    2000-12-01

    Normal operation of the facility is one of the key factors in the accomplishments of research goals. As confirmed by a case study of the influence of the facility operation condition on the research results, emphasis should be put on the facility preserve management. Facilities should be maintained in solid operational condition and their malfunctions should be repaired as soon as possible. The purpose of this project is to make propositions on the development of the facility Preserve management system which is to maximize the efficiency of the budget execution, manpower organization and maintenance planning, and is to minimize the duration of the operational pause due to malfunctions with the least disbursement

  19. Development techniques of computerized maintenance management system for nuclear fuel cycle examination facilities

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Yon Woo; Kim, S. D.; Soong, W. S.; Kim, G. H.; Oh, W. H.; Kim, Y. G

    2000-12-01

    Normal operation of the facility is one of the key factors in the accomplishments of research goals. As confirmed by a case study of the influence of the facility operation condition on the research results, emphasis should be put on the facility preserve management. Facilities should be maintained in solid operational condition and their malfunctions should be repaired as soon as possible. The purpose of this project is to make propositions on the development of the facility Preserve management system which is to maximize the efficiency of the budget execution, manpower organization and maintenance planning, and is to minimize the duration of the operational pause due to malfunctions with the least disbursement.

  20. Knowledge Management tools integration within DLR's concurrent engineering facility

    Science.gov (United States)

    Lopez, R. P.; Soragavi, G.; Deshmukh, M.; Ludtke, D.

    The complexity of space endeavors has increased the need for Knowledge Management (KM) tools. The concept of KM involves not only the electronic storage of knowledge, but also the process of making this knowledge available, reusable and traceable. Establishing a KM concept within the Concurrent Engineering Facility (CEF) has been a research topic of the German Aerospace Centre (DLR). This paper presents the current KM tools of the CEF: the Software Platform for Organizing and Capturing Knowledge (S.P.O.C.K.), the data model Virtual Satellite (VirSat), and the Simulation Model Library (SimMoLib), and how their usage improved the Concurrent Engineering (CE) process. This paper also exposes the lessons learned from the introduction of KM practices into the CEF and elaborates a roadmap for the further development of KM in CE activities at DLR. The results of the application of the Knowledge Management tools have shown the potential of merging the three software platforms with their functionalities, as the next step towards the fully integration of KM practices into the CE process. VirSat will stay as the main software platform used within a CE study, and S.P.O.C.K. and SimMoLib will be integrated into VirSat. These tools will support the data model as a reference and documentation source, and as an access to simulation and calculation models. The use of KM tools in the CEF aims to become a basic practice during the CE process. The settlement of this practice will result in a much more extended knowledge and experience exchange within the Concurrent Engineering environment and, consequently, the outcome of the studies will comprise higher quality in the design of space systems.

  1. Management aspects of Gemini's base facility operations project

    Science.gov (United States)

    Arriagada, Gustavo; Nitta, Atsuko; Adamson, A. J.; Nunez, Arturo; Serio, Andrew; Cordova, Martin

    2016-08-01

    Gemini's Base Facilities Operations (BFO) Project provided the capabilities to perform routine nighttime operations without anyone on the summit. The expected benefits were to achieve money savings and to become an enabler of the future development of remote operations. The project was executed using a tailored version of Prince2 project management methodology. It was schedule driven and managing it demanded flexibility and creativity to produce what was needed, taking into consideration all the constraints present at the time: Time available to implement BFO at Gemini North (GN), two years. The project had to be done in a matrix resources environment. There were only three resources assigned exclusively to BFO. The implementation of new capabilities had to be done without disrupting operations. And we needed to succeed, introducing the new operational model that implied Telescope and instrumentation Operators (Science Operations Specialists - SOS) relying on technology to assess summit conditions. To meet schedule we created a large number of concurrent smaller projects called Work Packages (WP). To be reassured that we would successfully implement BFO, we initially spent a good portion of time and effort, collecting and learning about user's needs. This was done through close interaction with SOSs, Observers, Engineers and Technicians. Once we had a clear understanding of the requirements, we took the approach of implementing the "bare minimum" necessary technology that would meet them and that would be maintainable in the long term. Another key element was the introduction of the "gradual descent" concept. In this, we increasingly provided tools to the SOSs and Observers to prevent them from going outside the control room during nighttime operations, giving them the opportunity of familiarizing themselves with the new tools over a time span of several months. Also, by using these tools at an early stage, Engineers and Technicians had more time for debugging

  2. Analysis of Operational and Management Cybersecurity Controls for Nuclear Facilities

    International Nuclear Information System (INIS)

    Oh, Jin Seok; Ryou, Jae Cheol

    2014-01-01

    U.S. NRC developed this RG 5.71 by tailoring the baseline security controls described in NIST Special Publication 800-53 'Recommended Security Controls for Federal Information Systems and Organizations' to provide an acceptable method to comply with the 10 CFR 73.54. The purpose of this publication is to provide guidelines for selecting and specifying security controls for information systems. In this paper, we are going to analyze and compare the NRC RG 5.71 and the NIST SP800-53, in particular, for operational security controls and management security controls. If RG 5.71 omits the specific security control that is included in SP800-53, we would review that omitting is adequate or not. If RG 5.71 includes the specific security control that is not included in SP800-53, we would also review the rationale. And we are going to consider some security controls to strengthen cybersecurity of nuclear facilities

  3. Metallurgical Laboratory Hazardous Waste Management Facility groundwater monitoring report

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, C.Y.

    1993-03-01

    During fourth quarter 1992, samples from 18 groundwater monitoring wells of the AMB series at the Metallurgical Laboratory Hazardous Waste Management Facility were analyzed for certain heavy metals, indicator parameters, radionuclides, volatile organic compounds, and other constituents. Six parameters exceeded final Primary Drinking Water Standards (PDWS) and the Savannah River Site Flag 2 criteria during the quarter. The results for fourth quarter 1992 are fairly consistent with the rest of the year's data. Tetrachloroethylene exceeded the final PDWS in well AMB 4D only two of the four quarters; in the other three wells in which it was elevated, it was present at similar levels throughout the year. Trichloroethylene consistently exceeded its PDWS in wells AMB 4A, 4B, 4D, 5, and 7A during the year. Trichloroethylene was elevated in well AMB 6 only during third and fourth quarters and in well AMB 7 only during fourth quarter. Total alpha-emitting radium was above the final PDWS for total radium in well AMB 5 at similar levels throughout the year and exceeded the PDWS during one of the three quarters it was analyzed for (third quarter 1992) in well AMB 10B.

  4. Metallurgical Laboratory Hazardous Waste Management Facility groundwater monitoring report

    International Nuclear Information System (INIS)

    Thompson, C.Y.

    1993-03-01

    During fourth quarter 1992, samples from 18 groundwater monitoring wells of the AMB series at the Metallurgical Laboratory Hazardous Waste Management Facility were analyzed for certain heavy metals, indicator parameters, radionuclides, volatile organic compounds, and other constituents. Six parameters exceeded final Primary Drinking Water Standards (PDWS) and the Savannah River Site Flag 2 criteria during the quarter. The results for fourth quarter 1992 are fairly consistent with the rest of the year's data. Tetrachloroethylene exceeded the final PDWS in well AMB 4D only two of the four quarters; in the other three wells in which it was elevated, it was present at similar levels throughout the year. Trichloroethylene consistently exceeded its PDWS in wells AMB 4A, 4B, 4D, 5, and 7A during the year. Trichloroethylene was elevated in well AMB 6 only during third and fourth quarters and in well AMB 7 only during fourth quarter. Total alpha-emitting radium was above the final PDWS for total radium in well AMB 5 at similar levels throughout the year and exceeded the PDWS during one of the three quarters it was analyzed for (third quarter 1992) in well AMB 10B

  5. Coupling and quantifying resilience and sustainability in facilities management

    DEFF Research Database (Denmark)

    Cox, Rimante Andrasiunaite; Nielsen, Susanne Balslev; Rode, Carsten

    2015-01-01

    Purpose – The purpose of this paper is to consider how to couple and quantify resilience and sustainability, where sustainability refers to not only environmental impact, but also economic and social impacts. The way a particular function of a building is provisioned may have significant repercus......Purpose – The purpose of this paper is to consider how to couple and quantify resilience and sustainability, where sustainability refers to not only environmental impact, but also economic and social impacts. The way a particular function of a building is provisioned may have significant...... repercussions beyond just resilience. The goal is to develop a decision support tool for facilities managers. Design/methodology/approach – A risk framework is used to quantify both resilience and sustainability in monetary terms. The risk framework allows to couple resilience and sustainability, so...... that the provisioning of a particular building can be investigated with consideration of functional, environmental, economic and, possibly, social dimensions. Findings – The method of coupling and quantifying resilience and sustainability (CQRS) is illustrated with a simple example that highlights how very different...

  6. Understanding and Managing Aging of Spent Nuclear Fuel and Facility Components in Wet Storage

    International Nuclear Information System (INIS)

    Johnson, A. B.

    2007-01-01

    Storage of nuclear fuel after it has been discharged from reactors has become the leading spent fuel management option. Many storage facilities are being required to operate longer than originally anticipated. Aging is a term that has emerged to focus attention on the consequences of extended operation on systems, structures, and components that comprise the storage facilities. The key to mitigation of age-related degradation in storage facilities is to implement effective strategies to understand and manage aging of the facility materials. A systematic approach to preclude serious effects of age-related degradation is addressed in this paper, directed principally to smaller facilities (test and research reactors). The first need is to assess the materials that comprise the facility and the environments that they are subject to. Access to historical data on facility design, fabrication, and operation can facilitate assessment of expected materials performance. Methods to assess the current condition of facility materials are summarized in the paper. Each facility needs an aging management plan to define the scope of the management program, involving identification of the materials that need specific actions to manage age-related degradation. For each material identified, one or more aging management programs are developed and become part of the plan Several national and international organizations have invested in development of comprehensive and systematic approaches to aging management. A method developed by the US Nuclear Regulatory Commission is recommended as a concise template to organize measures to effectively manage age-related degradation of storage facility materials, including the scope of inspection, surveillance, and maintenance that is needed to assure successful operation of the facility over its required life. Important to effective aging management is a staff that is alert for evidence of materials degradation and committed to carry out the aging

  7. 40 CFR 271.12 - Requirements for hazardous waste management facilities.

    Science.gov (United States)

    2010-07-01

    ... Requirements for Final Authorization § 271.12 Requirements for hazardous waste management facilities. The State shall have standards for hazardous waste management facilities which are equivalent to 40 CFR parts 264... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Requirements for hazardous waste...

  8. [The basic system for the management of a spa and resort facility].

    Science.gov (United States)

    Fedotchenko, A A; Kholmogorov, N A

    2014-01-01

    The authors propose the basic system for the management of a spa and resort facility that ensures functioning of all its divisions as an integrated process. It is maintained that organization of a spa and resort facility must include measures aimed at improving its working structure, material and technical resources, marketing plans, financial management, medical services, informational support, and personnel administration.

  9. Professional Development through Organizational Assessment: Using APPA's Facilities Management Evaluation Program

    Science.gov (United States)

    Medlin, E. Lander; Judd, R. Holly

    2013-01-01

    APPA's Facilities Management Evaluation Program (FMEP) provides an integrated system to optimize organizational performance. The criteria for evaluation not only provide a tool for organizational continuous improvement, they serve as a compelling leadership development tool essential for today's facilities management professional. The senior…

  10. A Qualitative Study Investigating Facility Managers' Perceptions of the Classroom Learning Environment

    Science.gov (United States)

    Parr, Eric Shannon

    2017-01-01

    Facility managers have the challenge of adhering to community college policies and procedures while fulfilling requirements of administration, students, and teachers concerning specific needs of classroom aesthetics. The role of facility manager and how specific entities affect perceptions of the design and implementation of classroom aesthetics…

  11. Guidelines for Development of a Base Commander’s Manual for Facilities Management

    Science.gov (United States)

    1988-09-01

    of the Commander’s job in facilities management ?, (2) What information sources are available to prepare the new commander for these responsibilities...Commanders say they need to know about facilities management and civil engineering operations?, (5) where can this additional information be found?, (6) How

  12. [Quality management of nuclear medicine facilities and experience during JCI certification].

    Science.gov (United States)

    Huang, Zhongke; Lou, Cen; Chen, Liang

    2010-03-01

    In 2003, JCI certification was introduced to create our new hospital quality management system. Our department imaging facilities management level and service quality markedly improved through JCI certification and re-evaluation. It played an important role in improving the efficiency and extending the life of medical facilities, reducing maintenance costs.

  13. Management of radioactive effluents and conditioning of solid waste from nuclear facilities

    International Nuclear Information System (INIS)

    Shekhar, P.; Banerjee, K.; Khan, S.S.; Gandhi, P.M.; Rastogi, R.C.

    1993-01-01

    An efficient radioactive waste management is an essential and integral part of various nuclear facilities in India. The salient features of waste management system design for low and intermediate level waste from the nuclear facilities, treatment and conditioning methods in use, processes and systems under development are described in the paper. (author). 2 figs., 2 tabs

  14. Developing Mobile BIM/2D Barcode-Based Automated Facility Management System

    OpenAIRE

    Yu-Cheng Lin; Yu-Chih Su; Yen-Pei Chen

    2014-01-01

    Facility management (FM) has become an important topic in research on the operation and maintenance phase. Managing the work of FM effectively is extremely difficult owing to the variety of environments. One of the difficulties is the performance of two-dimensional (2D) graphics when depicting facilities. Building information modeling (BIM) uses precise geometry and relevant data to support the facilities depicted in three-dimensional (3D) object-oriented computer-aided design (CAD). This pap...

  15. Success in siting low-level radioactive waste management facilities

    International Nuclear Information System (INIS)

    Brown, P.; McCauley, D.

    2001-01-01

    Full text: The Government of Canada is about to conclude a legal agreement with three municipalities that will result in a $260-million 10-year multi-phase project to cleanup low-level radioactive wastes and contaminated soils and establish long-term low-level radioactive waste management facilities. Over the last two decades, numerous efforts were undertaken to resolve this long-standing environmental issue. Finally, the communities where the wastes are located came forward with resolutions that they were willing to develop local solutions to the problem. All three municipalities, facilitated by Government funding and assistance, put forward their own local solution to their own waste problem. Government accepted the municipalities' proposals as the basis of a comprehensive approach for dealing with the local problem. Negotiations ensued on Principles of Understanding under which the cleanup would proceed and new long-term waste management facilities would be established. Government's acceptance of the negotiated Principles led to the preparation of a legal agreement that was subsequently signed by each of the municipalities and is now about to be ratified by the Government of Canada. Resolution of the issue will be a major milestone in the Government's environmental agenda. The project will result in an environmentally-responsible, safe, and publicly-accepted approach to the long-term management of the wastes and remove one of the largest contaminated sites issues from the Government's agenda. It also advances the Government's nuclear waste policy and indicates to waste producers that the Government is developing and implementing solutions for wastes for which it is responsible. A key lesson for the Government of Canada in this process has been the advantages of a locally-generated solution. Through the process, the Government empowered the local municipalities to develop their own solution to the local waste problem. It facilitated and supported that effort

  16. Radonclose - the system of Soviet designed regional waste management facilities

    International Nuclear Information System (INIS)

    Horak, W.C.; Reisman, A.; Purvis, E.E. III.

    1997-01-01

    The Soviet Union established a system of specialized regional facilities to dispose of radioactive waste generated by sources other than the nuclear fuel cycle. The system had 16 facilities in Russia, 5 in Ukraine, one in each of the other CIS states, and one in each of the Baltic Republics. These facilities are still being used. The major generators of radioactive waste they process these are research and industrial organizations, medical and agricultural institution and other activities not related to nuclear power. Waste handled by these facilities is mainly beta- and gamma-emitting nuclides with half lives of less than 30 years. The long-lived and alpha-emitting isotopic content is insignificant. Most of the radwaste has low and medium radioactivity levels. The facilities also handle spent radiation sources, which are highly radioactive and contain 95-98 percent of the activity of all the radwaste buried at these facilities

  17. The impacts of motivation, personal traits of managers and management education on the performances of public healthcare facilities

    Directory of Open Access Journals (Sweden)

    Karanović Nevena

    2016-01-01

    Full Text Available Background/Aim. Exposed to increasing needs of users for better and faster services, more medications and innovative health technologies, managers of healthcare services in the public sector need motivation, permanent updating of information and constant personal development. The aim of this paper was to evaluate, on the basis of experienced healthcare managers, the impact of their motivation, selected character traits, managerial skills and formal education in management on healthcare facilities performances in the public sector. Methods. For the purposes of this study, 97 experienced managers from public hospitals and primary health centers in Serbia answered to 30 questions on the motivation of managers, essential skills for successful management and formal education in management in health facilities. The obtained data about their motivation, governing experience, personal skills and formal education in management were systematized and processed by the Statistical Package for Social Sciences (SPSS. Healthcare facilities performances were expressed by the healthcare facilities ranks in the official annual rankings according to the quality improvement, conducted by the Institute of Public Health of Serbia. Pearson's or Spearman's correlation coefficients were used for proving the potential impact of selected factors on performances of healthcare facilities. Results. This study confirmed the association between the healthcare facilities ranks and managers' abilities to organize the working process (t = -2.453; p = 0.018; expressed high managers’ motivation (ρS = 0.206; p = 0.048 and the length of governing experience (r = -0.198; p = 0.043. Within a 3-year follow-up, this study also confirmed a positive correlation between annual ranks of healthcare facilities and managers quality management courses (ρS = -0.238; p = 0.017 and managers education in human resources management (ρS = -0.234; p = 0.027. Conclusion. In addition to management

  18. Nuclear facilities maintenance in the core of management-advanced trend in IBM Maximo asset management applications

    International Nuclear Information System (INIS)

    Seino, Satoshi; Ujihara, Satoshi; Kikuyama, Kaoru

    2009-01-01

    European and US plant owners have attached importance to plant maintenance, such as prompt grasp of plant states, implementation of maintenance and planning of maintenance programs, as one of asset management. The US advanced trend was introduced in this feature article through the applications of IBM Maximo Asset Management for nuclear facilities maintenance. World trends of nuclear power and related problems, need of nuclear facilities management, key items for introduction of maintenance management systems, required systems for nuclear maintenance management and introduction of functions of the IBM strategic asset management solution-Maximo were described respectively. (T. Tanaka)

  19. Assessment of management policies and practices for occupational exposure to bloodborne pathogens in dialysis facilities.

    Science.gov (United States)

    Mbaeyi, Chukwuma; Panlilio, Adelisa L; Hobbs, Cynthia; Patel, Priti R; Kuhar, David T

    2012-10-01

    Occupational exposure management is an important element in preventing the transmission of bloodborne pathogens in health care settings. In 2008, the US Centers for Disease Control and Prevention conducted a survey to assess procedures for managing occupational bloodborne pathogen exposures in outpatient dialysis facilities in the United States. A cross-sectional survey of randomly selected outpatient dialysis facilities. 339 outpatient dialysis facilities drawn from the 2006 US end-stage renal disease database. Hospital affiliation (free-standing vs hospital-based facilities), profit status (for-profit vs not-for-profit facilities), and number of health care personnel (≥100 vs facilities reporting occupational bloodborne pathogen exposures and offering occupational exposure management services. We analyzed bloodborne pathogen exposures and provision of postexposure prophylaxis by facility type. Nearly all respondents (99.7%) had written policies and 95% provided occupational exposure management services to health care personnel during the daytime on weekdays, but services were provided infrequently during other periods of the week. Approximately 10%-15% of facilities reported having HIV, HBV, or HCV exposures in health care personnel in the 12 months prior to the survey, but inconsistencies were noted in procedures for managing such exposures. Despite 86% of facilities providing HIV prophylaxis for exposed health care personnel, only 37% designated a primary HIV postexposure prophylaxis regimen. For-profit and free-standing facilities reported fewer exposures, but did not as reliably offer HBV prophylaxis or have a primary HIV postexposure prophylaxis regimen relative to not-for-profit and hospital-based facilities. The survey response rate was low (37%) and familiarity of individuals completing the survey with facility policies or national guidelines could not be ascertained. Significant improvements are required in the implementation of guidelines for managing

  20. Aiding pest control management of long-tailed macaques (Macaca fascicularis fascicularis) in Malaysia by using molecular markers of mitochondrial DNA

    Science.gov (United States)

    Abdul-Latiff, M. A. B.; Abdul-Patah, P.; Yaakop, S.; Md-Zain, B. M.

    2017-10-01

    The long-tailed macaques (Macaca fascicularis fascicularis) has been the center of human wildlife conflict in Malaysia since 1970s. This well-adapted and opportunistic primates have been dominating wide range of habitat in Malaysia such as primary and secondary forest, mangrove, as well as human settlements. The conventional practices of translocation by the authorities are threatening the uniqueness of gene pool for this species and ironically contradicting with the ultimate purpose of genetic conservation of this species. The objectives of this study is to determine the level of genetic separation between populations of long-tailed macaques, primarily focusing on populations distributed in northern Peninsular Malaysia. A total of 954 base pairs of control regions mtDNA was sequenced and analyzed from 27 samples of M. fascicularis. The results exhibited a highly homogenous state of populations for long-tailed macaques genetically and this ultimately indicate unsuitable management and planning in terms of pest control management of the species. Authorities are suggested to translocate the species at least within the state boundaries to avoid homogeneity of gene pools for the particular species.

  1. Facility management - from internal conditioner to successful business sector; Facility Management - vom internen Fitmacher zum erfolgreichen Geschaeftsfeld

    Energy Technology Data Exchange (ETDEWEB)

    Schoenberg, I. [Mannheimer Versorgungs- und Verkehrsgesellschaft mbH (MVV), Mannheim (Germany)

    1999-04-01

    The deregulation of the energy markets has given rise to sustained motion in the prevailing structures and market conditions of the supply industry. Dramatic declines in profits in the electricity sector have, in many companies, prompted reflex-like cost reduction programs which, however, frequently prejudice long-term growth prospects and viable future structures in favour of the results of the next fiscal year. The danger of sacrificing all flexibility and therefore market perspectives by corporate anorexia nervosa is immense. The MVV Energie AG, Mannheim, has reacted speedily to this situation and is pursuing a growth-oriented strategy which regards the challenges of competition as opportunity for on-going development. (orig.) [Deutsch] Kapitaldienst oder Miete, Energie, Wartung und Instandsetzung technischer Anlagen, Gebaeudeunterhalt-, -reinigung, Sicherheitsdienste, Versicherungen und vieles mehr uebersteigen ueber Jahre hinweg kumuliert die Baukosten um ein vielfaches und erhoehen bei Immobilieneigentuemern und -nutzern den Kostendruck. Beim Facility Management (FM) stehen nicht mehr nur die Investitionskosten fuer ein Gebaeude im Vordergrund, sondern sein gesamter Lebenszyklus, beginnend mit Idee, Konzeption und Investitionsentscheidung ueber Planung und Errichtung. Nutzung inklusive spaeterer Umbauten und Sanierungen bis hin zu Abriss und Neubau. Mit ihrer Dienstleistung FM bietet die MVV Energie AG ihren Kunden Gesamtkonzeption von der Beratung ueber die Planung und Umsetzung bis hin zur Uebernahme des FM an. (orig.)

  2. Remote sensing supported surveillance and characterization of tailings behavior at a gold mine site, Finland.

    Science.gov (United States)

    Rauhala, Anssi; Tuomela, Anne; Rossi, Pekka M.; Davids, Corine

    2017-04-01

    gathered data and obtained results form the basis for further modelling efforts which aim at better management of tailings storage facilities.

  3. 41 CFR 102-72.45 - What are the different types of delegations related to facility management?

    Science.gov (United States)

    2010-07-01

    ... types of delegations related to facility management? 102-72.45 Section 102-72.45 Public Contracts and... different types of delegations related to facility management? The principal types of delegations involved in the management of facilities are— (a) Real property management and operation authority; (b...

  4. Staff teamwork in long-term care facilities: the influence of management style, training, and feedback.

    Science.gov (United States)

    Tyler, Denise A; Parker, Victoria A

    2011-04-01

    The purpose of this study was to describe the organizational factors associated with high and low amounts of teamwork among direct-care workers in long-term care (LTC) facilities. A systematic analysis of observation data collected at 20 LTC facilities was first used to categorize facilities as high-, moderate-, or low-teamwork facilities. Next, qualitative analysis of 59 interviews collected in 4 high-teamwork and 5 low-teamwork facilities was used to identify the organizational factors associated with high and low teamwork. Findings showed that high- and low-teamwork LTC facilities in this study differed in three organizational areas: management style, training, and feedback and recognition. As such, improved teamwork in LTC facilities may result from changes to basic management practices, such as training and employee feedback. Copyright 2011, SLACK Incorporated.

  5. Uranium tailings in Canada

    International Nuclear Information System (INIS)

    Boulden, R.S.; Bragg, K.

    1982-01-01

    The last few years have produced significant changes in the way uranium tailings are managed in Canada. This is due both to the development of new technology and to changes in regulatory approach. The interrelationships between these two areas are examined with particular attention paid to the long term and the development of close-out criteria. New technological initiatives are examined including dry placement techniques, pit disposal and deep lake disposal

  6. A Study on Governance and Human Resources for Cooperative Road Facilities Management

    Science.gov (United States)

    Ohno, Sachiko; Takagi, Akiyoshi; Kurauchi, Fumitaka; Demura, Yoshifumi

    Within today's infrastructure management, Asset Management systems are becoming a mainstream feature. For region where the risk is low, it is necessary to create a "cooperative road facilities management system". This research both examined and suggested what kind of cooperative road facilities management system should be promoted by the regional society. Concretely, this study defines the operational realities of a previous case. It discusses the problem of the road facilities management as a governance. Furthermore, its realization depends on "the cooperation between municipalities", "the private-sector initiative", and "residents participation" .Also, it discusses the problem of human resources for governance. Its realization depends on "the engineers' promotion", and "creation of a voluntary activity of the resident" as a human resources. Moreover, it defines that the intermediary is important because the human resources tied to the governance. As a result, the prospect of the road facilities management is shown by the role of the player and the relation among player.

  7. Facility Management as a Way of Reducing Costs in Transport Companies

    Science.gov (United States)

    Matusova, Dominika; Gogolova, Martina

    2017-10-01

    For facility management exists a several interpretations. These interpretations emerged progressively. At the time of the notion of facility management was designed to manage an administrative building, in the United States (US). They can ensure their operation and maintenance. From the US, this trend is further moved to Europe and now it start becoming a current and actual topic also in Slovakia. Facility management is contractually agreed scheme of services, semantically recalls traditional building management. There by finally pushed for activities related to real estates. For facility management is fundamental - certification and certification systems. Therefore, is essential to know, the cost structure of certification. The most commonly occurring austerity measures include: heat pumps, use of renewable energy, solar panels and water savings. These measures can reduce the cost.

  8. Does identity shape leadership and management practice? Experiences of PHC facility managers in Cape Town, South Africa

    Science.gov (United States)

    Daire, Judith; Gilson, Lucy

    2014-01-01

    In South Africa, as elsewhere, Primary Health Care (PHC) facilities are managed by professional nurses. Little is known about the dimensions and challenges of their job, or what influences their managerial practice. Drawing on leadership and organizational theory, this study explored what the job of being a PHC manager entails, and what factors influence their managerial practice. We specifically considered whether the appointment of professional nurses as facility managers leads to an identity transition, from nurse to manager. The overall intention was to generate ideas about how to support leadership development among PHC facility managers. Adopting case study methodology, the primary researcher facilitated in-depth discussions (about their personal history and managerial experiences) with eight participating facility managers from one geographical area. Other data were collected through in-depth interviews with key informants, document review and researcher field notes/journaling. Analysis involved data triangulation, respondent and peer review and cross-case analysis. The experiences show that the PHC facility manager’s job is dominated by a range of tasks and procedures focused on clinical service management, but is expected to encompass action to address the population and public health needs of the surrounding community. Managing with and through others, and in a complex system, requiring self-management, are critical aspects of the job. A range of personal, professional and contextual factors influence managerial practice, including professional identity. The current largely facility-focused management practice reflects the strong nursing identity of managers and broader organizational influences. However, three of the eight managers appear to self-identify an emerging leadership identity and demonstrate related managerial practices. Nonetheless, there is currently limited support for an identity transition towards leadership in this context. Better

  9. Summary of the Waste Management Programs at uranium recovery facilities as they relate to the 40 CFR Part 192 standards

    International Nuclear Information System (INIS)

    Gillen, D.; Baldwin, J.S.; Campbell, A.W.; Hinkle, N.E.; Pin, F.G.; Staub, W.P.

    1985-10-01

    This study evaluates the degree to which surface impoundments at licensed facilities comply with significant changes in NRC requirements initiated by enactment of EPA's final environmental standards for uranium recovery facilities (40 CFR Part 192). Impoundment liner requirements, ground-water protection standards, ground-water monitoring and corrective action programs, and site closure standards are the most significant regulatory modifications. The compliance status of 30 conventional mills and 31 in-situ mines is determined from a review of Nuclear Regulatory Commission and agreement state docket files through November, 1983. Results of this review show that a majority of conventional uranium mill tailings management systems are deficient with respect to liner requirements for new impoundments or proposed expansions to existing impoundments, as well as with respect to some aspects of ground-water monitoring and compliance programs. Furthermore, the status of conventional mill site closure plans is highly uncertain at this time. Although surface impoundments at in-situ uranium mines also are deficient with respect to ground-water monitoring programs, they generally comply with other changes in requirements imposed by 40 CFR Part 192

  10. A guideline for interpersonal capabilities enhancement to support sustainable facility management practice

    Science.gov (United States)

    Sarpin, Norliana; Kasim, Narimah; Zainal, Rozlin; Noh, Hamidun Mohd

    2018-04-01

    Facility management is the key phase in the development cycle of an assets and spans over a considerable length of time. Therefore, facility managers are in a commanding position to maximise the potential of sustainability through the development phases from construction, operation, maintenance and upgrade leading to decommission and deconstruction. Sustainability endeavours in facility management practices will contribute to reducing energy consumption, waste and running costs. Furthermore, it can also help in improving organisational productivity, financial return and community standing of the organisation. Facility manager should be empowered with the necessary knowledge and capabilities at the forefront facing sustainability challenge. However, literature studies show a gap between the level of awareness, specific knowledge and the necessary skills required to pursue sustainability in the facility management professional. People capability is considered as the key enabler in managing the sustainability agenda as well as being central to the improvement of competency and innovation in an organisation. This paper aims to develop a guidelines for interpersonal capabilities to support sustainability in facility management practice. Starting with a total of 7 critical interpersonal capabilities factors identified from previous questionnaire survey, the authors conducted an interview with 3 experts in facility management to assess the perceived importance of these factors. The findings reveal a set of guidelines for the enhancement of interpersonal capabilities among facility managers by providing what can be done to acquire these factors and how it can support the application of sustainability in their practice. The findings of this paper are expected to form the basis of a mechanism framework developed to equip facility managers with the right knowledge, to continue education and training and to develop new mind-sets to enhance the implementation of sustainability

  11. Prescribed fire: A proposed management tool to facilitate black-tailed prairie dog (Cynomys ludovicianus) colony expansion

    Science.gov (United States)

    Felicia D. Archuleta; Paulette L. Ford

    2013-01-01

    Black-tailed prairie dogs (Cynomys ludovicianus) are considered a keystone species in grassland ecosystems. Through their burrowing activities, they conspicuously alter grassland landscapes and provide foraging, shelter and nesting habitat for a diverse array of grassland species, in addition to serving as prey for the endangered black-footed ferret (Mustela nigripes...

  12. The effect of 'mosaic management' on the demography of black-tailed godwit Limosa limosa on farmland

    NARCIS (Netherlands)

    Schekkerman, H.; Teunissen, W.; Oosterveld, E.

    2008-01-01

    1. Like many farmland birds, the largest European population of the black-tailed godwit Limosa limosa, in The Netherlands, has been declining for decades despite conservation measures including agri-environment schemes (AES). In a new experimental AES aiming to reverse this decline, collectives of

  13. The effect of 'mosaic management' on the demography of black-tailed godwit Limosa limosa on farmland

    NARCIS (Netherlands)

    Schekkerman, H.; Teunissen, W.A.; Oosterveld, E.

    2008-01-01

    ABSTRACT 1. Like many farmland birds, the largest European population of the black-tailed godwit Limosa limosa, in The Netherlands, has been declining for decades despite conservation measures including agri-environment schemes (AES). In a new experimental AES aiming to reverse this decline,

  14. The effect of 'mosaic management' on the demography of black-tailed godwit Limosa limosa on farmland

    NARCIS (Netherlands)

    Schekkerman, Hans; Teunissen, Wolf; Oosterveld, Ernst

    1. Like many farmland birds, the largest European population of the black-tailed godwit Limosa limosa, in The Netherlands, has been declining for decades despite conservation measures including agri-environment schemes (AES). In a new experimental AES aiming to reverse this decline, collectives of

  15. Forest habitats and the nutritional ecology of Sitka black-tailed deer: a research synthesis with implications for forest management.

    Science.gov (United States)

    T.A. Hanley; C.T. Robbins; D.E. Spalinger

    1989-01-01

    Research on forest habitats and the nutritional ecology of Sitka black-tailed deer conducted during 1981 through 1986 is reviewed and synthesized. The research approach was based on the assumption that foraging efficiency is the best single measure of habitat quality for an individual deer. Overstory-understory relations and the influence of forest overstory on snow...

  16. Grabbing the Air Force by the Tail: Applying Strategic Cost Analytics to Understand and Manage Indirect Cost Behavior

    Science.gov (United States)

    2015-09-17

    understanding of one’s self. The experience of a doctoral journey teaches you that the archetype of a self-made PhD is only a myth as the limiting factors...128 6.2 Tooth-to-Tail Literature ...Consequently, each chapter contains its own literature review, methodology, analysis, and conclusion sections with recommendations for future research

  17. Abundance of invertebrates and foraging success of Black-tailed Godwit Limosa limosa chicks in relation to agricultural grassland management

    NARCIS (Netherlands)

    Schekkerman, Hans; Beintema, Albert J.

    2007-01-01

    Effects of agricultural intensification on availability of grassland invertebrates as food for chicks of the declining Black-tailed Godwit Limosu limosa were studied in The Netherlands. Invertebrates were sampled with photo-eclectors in wet grasslands used for intensive dairy farming (high

  18. Abundance of invertebrates and foraging success of black-tailed godwit Limosa limosa chicks in relation to agricultural grassland management

    NARCIS (Netherlands)

    Schekkerman, H.; Beintema, A.J.

    2007-01-01

    Effects of agricultural intensification on availability of grassland invertebrates as food for chicks of the declining Black-tailed Godwit Limosa limosa were studied in The Netherlands. Invertebrates were sampled with photo-eclectors in wet grasslands used for intensive dairy farming (high

  19. Risk management technique for liquefied natural gas facilities

    Science.gov (United States)

    Fedor, O. H.; Parsons, W. N.

    1975-01-01

    Checklists have been compiled for planning, design, construction, startup and debugging, and operation of liquefied natural gas facilities. Lists include references to pertinent safety regulations. Methods described are applicable to handling of other hazardous materials.

  20. Nuclear Facility Isotopic Content (NFIC) Waste Management System to provide input for safety envelope definition

    International Nuclear Information System (INIS)

    Genser, J.R.

    1992-01-01

    The Westinghouse Savannah River Company (WSRC) is aggressively applying environmental remediation and radioactive waste management activities at the US Department of Energy's Savannah River Site (SRS) to ensure compliance with today's challenging governmental laws and regulatory requirements. This report discusses a computer-based Nuclear Facility Isotopic Content (NFIC) Waste Management System developed to provide input for the safety envelope definition and assessment of site-wide facilities. Information was formulated describing the SRS ''Nuclear Facilities'' and their respective bounding inventories of nuclear materials and radioactive waste using the NFIC Waste Management System

  1. Supervision of Waste Management and Environmental Protection at the Swedish Nuclear Facilities 2001

    CERN Document Server

    Persson, M

    2003-01-01

    The report summarizes the supervision of waste management and environmental protection at the nuclear facilities that was carried out by the Swedish Radiation Protection Authority in 2001. A summary of the inspections and a description of important issues connected with the supervision of the nuclear facilities are given.The inspections during 2001 have focused on theme inspections of waste management, environmental inspections considering the environmental monitoring at the Swedish nuclear facilities and review safety analysis and research programs from the Swedish Nuclear Fuel and Waste Management Co.The Swedish Radiation Protection Authority finds that the operations are mainly performed according to current regulations

  2. The Core Services of the Facilities Management Based Company in Malaysia

    Directory of Open Access Journals (Sweden)

    Ahmad Zawawi Zuraihana

    2014-01-01

    Full Text Available Many questions rose on defining the implementation of Facilities Management (FM in Malaysia. To date, the FM player only provided services sufficiently without the desires to enhance their services by taking into account the standard of practice which should form the basis. The extent of the services in Facilities Management based companies in Malaysia is not known and this paper aimed to identify within the context. The scope of study is limited to respondents in Klang Valley area. Literature review is used as a basis and questionnaires survey distributed to 20 companies, representing 56% of the total FM companies in Klang Valley are used to capture the data. The senior management level is assessed to represent. The results revealed that the implementation of facilities management services is limited, but still evolving. The majority of the FM based companies provides facilities services under the category of building operation and maintenance as their core business and procured them by in-house. The core services comprise of Electrical System, Cleaning, mechanical, HVAC system, plumbing & Sewerage , Fire Protection, Landscape, Lifts and Escalator, Security & Safety, Parking Management, Consultancy & Advisory Services, Waste Management, ICT System, Pest Control, Energy Management & Conservation, Building Audit Services, Customer Care Management, Transition Management, Catering &Vending Services. Based on what FM can offer, there is the necessity to reinforce the awareness to ensure continuously improve the management of national assets and facilities.

  3. Use of Information Technology for Management of U.S. Postal Service Facilities.

    Science.gov (United States)

    1996-05-01

    Steven Herrera, Manager of Facilities, Ritz - Carlton Hotels. 2 LMI Report PS406MR2, Facilities Staffing Requirements at the U.S. Postal Service, John...documents: ♦ Facility Planning Concept (FPC). The FPC is a computerized program used for planning small, standard plan buildings with less than 6,500...contract actions constitute a major portion of the paperwork that is generated. (Refer to Appendix I for an explanation of the concept

  4. 48 CFR 801.602-80 - Legal and technical review-Office of Construction and Facilities Management and National Cemetery...

    Science.gov (United States)

    2010-10-01

    ...-Office of Construction and Facilities Management and National Cemetery Administration. 801.602-80 Section... Responsibilities 801.602-80 Legal and technical review-Office of Construction and Facilities Management and National Cemetery Administration. An Office of Construction and Facilities Management or National Cemetery...

  5. Risk management study for the Hanford Site facilities: Risk reduction cost comparison for the retired Hanford Site facilities

    International Nuclear Information System (INIS)

    Coles, G.A.; Egge, R.G.; Senger, E.; Shultz, M.W.; Taylor, W.E.

    1994-02-01

    This document provides a cost-comparison evaluation for implementing certain risk-reduction measures and their effect on the overall risk of the 100 and 200 Area retired, surplus facilities. The evaluation is based on conditions that existed at the time the risk evaluation team performed facility investigations, and does not acknowledge risk-reduction measures that occurred soon after risk identification. This evaluation is one part of an overall risk management study for these facilities. The retired facilities investigated for this evaluation are located in the 100 and 200 Areas of the 1450-km 2 Hanford Site. The Hanford Site is a semiarid tract of land in southeastern Washington State. The nearest population center is Richland, Washington, (population 32,000) 30 km southeast of the 200 Area. This cost-comparison evaluation (1) determines relative costs for reducing risk to acceptable levels; (2) compares the cost of reducing risk using different risk-reduction options; and (3) compares the cost of reducing risks at different facilities. The result is an identification of the cost effective risk-reduction measures. Supporting information required to develop costs of the various risk-reduction options also is included

  6. Risk management study for the Hanford Site facilities: Risk reduction cost comparison for the retired Hanford Site facilities. Volume 4

    Energy Technology Data Exchange (ETDEWEB)

    Coles, G.A.; Egge, R.G.; Senger, E.; Shultz, M.W.; Taylor, W.E.

    1994-02-01

    This document provides a cost-comparison evaluation for implementing certain risk-reduction measures and their effect on the overall risk of the 100 and 200 Area retired, surplus facilities. The evaluation is based on conditions that existed at the time the risk evaluation team performed facility investigations, and does not acknowledge risk-reduction measures that occurred soon after risk identification. This evaluation is one part of an overall risk management study for these facilities. The retired facilities investigated for this evaluation are located in the 100 and 200 Areas of the 1450-km{sup 2} Hanford Site. The Hanford Site is a semiarid tract of land in southeastern Washington State. The nearest population center is Richland, Washington, (population 32,000) 30 km southeast of the 200 Area. This cost-comparison evaluation (1) determines relative costs for reducing risk to acceptable levels; (2) compares the cost of reducing risk using different risk-reduction options; and (3) compares the cost of reducing risks at different facilities. The result is an identification of the cost effective risk-reduction measures. Supporting information required to develop costs of the various risk-reduction options also is included.

  7. SNL/CA Facilities Management Design Standards Manual

    Energy Technology Data Exchange (ETDEWEB)

    Rabb, David [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Clark, Eva [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2014-12-01

    At Sandia National Laboratories in California (SNL/CA), the design, construction, operation, and maintenance of facilities is guided by industry standards, a graded approach, and the systematic analysis of life cycle benefits received for costs incurred. The design of the physical plant must ensure that the facilities are "fit for use," and provide conditions that effectively, efficiently, and safely support current and future mission needs. In addition, SNL/CA applies sustainable design principles, using an integrated whole-building design approach, from site planning to facility design, construction, and operation to ensure building resource efficiency and the health and productivity of occupants. The safety and health of the workforce and the public, any possible effects on the environment, and compliance with building codes take precedence over project issues, such as performance, cost, and schedule.

  8. Atmospheric Radiation Measurement (ARM) Climate Research Facility Management Plan

    Energy Technology Data Exchange (ETDEWEB)

    Mather, James [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-04-01

    Mission and Vision Statements for the U.S. Department of Energy (DOE)’s Atmospheric Radiation Measurement (ARM) Climate Research Facility Mission The ARM Climate Research Facility, a DOE scientific user facility, provides the climate research community with strategically located in situ and remote-sensing observatories designed to improve the understanding and representation, in climate and earth system models, of clouds and aerosols as well as their interactions and coupling with the Earth’s surface. Vision To provide a detailed and accurate description of the Earth atmosphere in diverse climate regimes to resolve the uncertainties in climate and Earth system models toward the development of sustainable solutions for the nation's energy and environmental challenges.

  9. Governance Change In Facilities Management: An Institutional Perspectives

    Directory of Open Access Journals (Sweden)

    Muhammad Kaleem Zahirul Hassan

    2012-12-01

    Full Text Available Governance of a specific field is shaped by not only the instrumental rationality but also the institutional rationality. In this research the instrumental rationality was manifested by the service providers and consultants who played a pivotal role in the construction of new governance in the field of facilities services in the Netherlands. Further, the role of institutional rationality was investigated wherein it was found that the logic of rationalization shaped the governance in the field of facilities services. Moreover, the implication for the explanation of practice variation by institutional theory is discussed.

  10. KSC facilities status and planned management operations. [for Shuttle launches

    Science.gov (United States)

    Gray, R. H.; Omalley, T. J.

    1979-01-01

    A status report is presented on facilities and planned operations at the Kennedy Space Center with reference to Space Shuttle launch activities. The facilities are essentially complete, with all new construction and modifications to existing buildings almost finished. Some activity is still in progress at Pad A and on the Mobile Launcher due to changes in requirements but is not expected to affect the launch schedule. The installation and testing of the ground checkout equipment that will be used to test the flight hardware is now in operation. The Launch Processing System is currently supporting the development of the applications software that will perform the testing of this flight hardware.

  11. Stochastic inventory management at a service facility with a set of ...

    African Journals Online (AJOL)

    Stochastic inventory management at a service facility with a set of reorder levels. VSS Yadavalli∗. B Sivakumar†. G Arivarignan‡. Received: 6 March 2006; Revised: 20 February 2007; Accepted: 8 March 2007. Abstract. We consider a continuous review perishable inventory system at a service facility with a finite waiting ...

  12. A randomized trial of heart failure disease management in skilled nursing facilities (SNF Connect): Lessons learned.

    Science.gov (United States)

    Daddato, Andrea; Wald, Heidi L; Horney, Carolyn; Fairclough, Diane L; Leister, Erin C; Coors, Marilyn; Capell, Warren H; Boxer, Rebecca S

    2017-06-01

    Conducting clinical trials in skilled nursing facilities is particularly challenging. This manuscript describes facility and patient recruitment challenges and solutions for clinical research in skilled nursing facilities. Lessons learned from the SNF Connect Trial, a randomized trial of a heart failure disease management versus usual care for patients with heart failure receiving post-acute care in skilled nursing facilities, are discussed. Description of the trial design and barriers to facility and patient recruitment along with regulatory issues are presented. The recruitment of Denver-metro skilled nursing facilities was facilitated by key stakeholders of the skilled nursing facilities community. However, there were still a number of barriers to facility recruitment including leadership turnover, varying policies regarding research, fear of litigation and of an increased workload. Engagement of facilities was facilitated by their strong interest in reducing hospital readmissions, marketing potential to hospitals, and heart failure management education for their staff. Recruitment of patients proved difficult and there were few facilitators. Identified patient recruitment challenges included patients being unaware of their heart failure diagnosis, patients overwhelmed with their illness and care, and frequently there was no available proxy for cognitively impaired patients. Flexibility in changing the recruitment approach and targeting skilled nursing facilities with higher rates of admissions helped to overcome some barriers. Recruitment of skilled nursing facilities and patients in skilled nursing facilities for clinical trials is challenging. Strategies to attract both facilities and patients are warranted. These include aligning study goals with facility incentives and flexible recruitment protocols to work with patients in "transition crisis."

  13. Mixed Waste Management Facility Preliminary Safety Analysis Report. Chapters 1 to 20

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    This document provides information on waste management practices, occupational safety, and a site characterization of the Lawrence Livermore National Laboratory. A facility description, safety engineering analysis, mixed waste processing techniques, and auxiliary support systems are included.

  14. Mixed Waste Management Facility Preliminary Safety Analysis Report. Chapters 1 to 20

    International Nuclear Information System (INIS)

    1994-09-01

    This document provides information on waste management practices, occupational safety, and a site characterization of the Lawrence Livermore National Laboratory. A facility description, safety engineering analysis, mixed waste processing techniques, and auxiliary support systems are included

  15. Characterization and environmental management of stormwater runoff from road-salt storage facilities.

    Science.gov (United States)

    2004-01-01

    The objectives of this study were to assess the quantity and quality of salt-contaminated water generated from stormwater runoff at VDOT's salt storage facilities and to evaluate management/treatment alternatives to reduce costs and better protect th...

  16. Mixed Waste Management Facility Groundwater Monitoring Report, Fourth Quarter 1998 and 1998 Summary

    Energy Technology Data Exchange (ETDEWEB)

    Chase, J.

    1999-04-29

    During fourth quarter 1998, ten constituents exceeded final Primary Drinking Water Standards (PDWS) in groundwater samples from downgradient monitoring wells at the Mixed Waste Management Facility. No constituents exceeded final PDWS in samples from the upgradient monitoring wells.

  17. Research notes : drainage facility asset management : more than an inventory of pipes.

    Science.gov (United States)

    2007-04-01

    The primary objectives for the research project were twofold: 1) To develop and implement an Oregon-specific system for inventorying and evaluating the condition of pipes, culverts, and stormwater facilities based on the FHWA Culvert Management Syste...

  18. A Facilities Manager's Guide to Green Building Design.

    Science.gov (United States)

    Simpson, Walter

    2001-01-01

    Explains how the "green building" approach to educational facilities design creates healthy, naturally lit, attractive buildings with lower operating and life cycle costs. Tips on getting started on a green design and overcoming the barriers to the green design concept are discussed. (GR)

  19. Centralization and Decentralization of Schools' Physical Facilities Management in Nigeria

    Science.gov (United States)

    Ikoya, Peter O.

    2008-01-01

    Purpose: This research aims to examine the difference in the availability, adequacy and functionality of physical facilities in centralized and decentralized schools districts, with a view to making appropriate recommendations to stakeholders on the reform programmes in the Nigerian education sector. Design/methodology/approach: Principals,…

  20. An energetical and economic optimization of the facility management; Energetische und wirtschaftliche Optimierung der GA

    Energy Technology Data Exchange (ETDEWEB)

    Roon, Serafin von; Gobmaier, Thomas; Mauch, Wolfgang [Forschungsstelle fuer Energiewirtschaft e.V., Muenchen (Germany)

    2009-06-15

    In the context of a project promoted by the Federal Ministry of Economics and Technology (Berlin, Federal Republic of Germany), the data of the facility management of an office building were evaluated by means of computer assistance in order to determine the optimal operating parameters and connected energy potentials. The contribution under consideration reports on the approach used for the analysis of the data of facility management and illustrates them with the results of the project.

  1. Science facilities and stakeholder management: how a pan-European research facility ended up in a small Swedish university town

    Science.gov (United States)

    Thomasson, Anna; Carlile, Colin

    2017-06-01

    This is the story of how a large research facility of broad European and global interest, the European Spallation Source (ESS), ended up in the small university town of Lund in Sweden. This happened in spite of the fact that a number of influential European countries were at one time or another competitors to host the facility. It is also a story about politics which attempts to illustrate how closely intertwined politics and science are, and how the interplay between those interests affects scientific progress. ESS became an arena for individual ambitions and political manoeuvring. The different stakeholders, in their striving to ensure that their own interests were realised, in various ways and with different degrees of success over the years, have influenced the key decisions that, during the already 30 year history of ESS, have driven the course that this project has taken. What emerges is that the interests of the stakeholders and the interests of the project itself are frequently not in harmony. This imposes challenges on the management of large research facilities as they have to not only navigate in the scientific landscape, which they often are more familiar with, but also in the political landscape. This story is therefore an attempt to shed light on the role of managers of large research facilities and the often delicate balancing act they have to perform when trying to comply with the different and often conflicting stakeholder interests. What is especially worthwhile examining, as we do in this paper, is the role that individuals, and the interaction between individuals, have played in the process. This shows that the focus of stakeholder theory on organisations, rather than the people in the organisations, needs to be redirected on to the individuals representing those organisations and their inter-relationships. At the same time it is clear that the developing field of stakeholder management theory has not emerged into the consciousness of science

  2. Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-03-01

    This document presents guidance for implementing the process that the U.S. Department of Energy (DOE) Office of Legacy Management (LM) will use for assuming perpetual responsibility for a closed uranium mill tailings site. The transition process specifically addresses sites regulated under Title II of the Uranium Mill Tailings Radiation Control Act (UMTRCA) but is applicable in principle to the transition of sites under other regulatory structures, such as the Formerly Utilized Sites Remedial Action Program.

  3. Waste management, waste resource facilities and waste conversion processes

    International Nuclear Information System (INIS)

    Demirbas, Ayhan

    2011-01-01

    In this study, waste management concept, waste management system, biomass and bio-waste resources, waste classification, and waste management methods have been reviewed. Waste management is the collection, transport, processing, recycling or disposal, and monitoring of waste materials. A typical waste management system comprises collection, transportation, pre-treatment, processing, and final abatement of residues. The waste management system consists of the whole set of activities related to handling, treating, disposing or recycling the waste materials. General classification of wastes is difficult. Some of the most common sources of wastes are as follows: domestic wastes, commercial wastes, ashes, animal wastes, biomedical wastes, construction wastes, industrial solid wastes, sewer, biodegradable wastes, non-biodegradable wastes, and hazardous wastes.

  4. Environmental surveillance for Waste Management Facilities at the Idaho National Engineering Laboratory. Annual report 1994

    Energy Technology Data Exchange (ETDEWEB)

    Wright, K.C.; Wilhelmsen, R.N.; Borsella, B.W.; Miles, M.

    1995-08-01

    This report describes calendar year 1994 environmental surveillance activities of Environmental Monitoring of Lockheed Martin Idaho Technologies, performed at Waste Management Facilities at the Idaho National Engineering Laboratory (INEL). The major facilities monitored include the Radioactive Waste Management Complex, the Waste Experimental Reduction Facility, the Mixed Waste Storage Facility, and two surplus facilities. Included are results of the sampling performed by the Radiological Environmental Surveillance Program, INEL Environmental Surveillance Program, and the United States Geological Survey. The primary purposes of monitoring are to evaluate environmental conditions, to provide and interpret data, to ensure compliance with applicable regulations or standards, and to ensure protection of human health and the environment. This report compares 1994 environmental surveillance data with US Department of Energy derived concentration guides and with data from previous years.

  5. The technological safety in facilities that manage radioactive sources

    International Nuclear Information System (INIS)

    Lizcano, D.

    2014-10-01

    The sealed radioactive sources are used inside a wide range of applications in the medicine, industry and investigation around the world. These sources can contain a great radionuclides variety, exhibiting a wide spectrum of activities and radiological half lives. This way, we can find pattern sources of radionuclides as Americium-241, Plutonium-238, Plutonium-239, Thorium-228 and Thorium-230, etc., with some activity of kBq in research laboratories, Iridium-192 and Cesium-137 sources used in brachytherapy with GBq activities, until sources with P Bq activities in industrial irradiators of Cobalt-60 and Cesium-137. This document approach the physical safety that entities like the IAEA recommends for the facilities that contain sealed sources, especially the measures that are taking in the Instituto Nacional de Investigaciones Nucleares (ININ) and others government facilities. (Author)

  6. Predictive Analytics to Support Real-Time Management in Pathology Facilities

    Science.gov (United States)

    Lessard, Lysanne; Michalowski, Wojtek; Chen Li, Wei; Amyot, Daniel; Halwani, Fawaz; Banerjee, Diponkar

    2016-01-01

    Predictive analytics can provide valuable support to the effective management of pathology facilities. The introduction of new tests and technologies in anatomical pathology will increase the volume of specimens to be processed, as well as the complexity of pathology processes. In order for predictive analytics to address managerial challenges associated with the volume and complexity increases, it is important to pinpoint the areas where pathology managers would most benefit from predictive capabilities. We illustrate common issues in managing pathology facilities with an analysis of the surgical specimen process at the Department of Pathology and Laboratory Medicine (DPLM) at The Ottawa Hospital, which processes all surgical specimens for the Eastern Ontario Regional Laboratory Association. We then show how predictive analytics could be used to support management. Our proposed approach can be generalized beyond the DPLM, contributing to a more effective management of pathology facilities and in turn to quicker clinical diagnoses. PMID:28269873

  7. Predictive Analytics to Support Real-Time Management in Pathology Facilities.

    Science.gov (United States)

    Lessard, Lysanne; Michalowski, Wojtek; Chen Li, Wei; Amyot, Daniel; Halwani, Fawaz; Banerjee, Diponkar

    2016-01-01

    Predictive analytics can provide valuable support to the effective management of pathology facilities. The introduction of new tests and technologies in anatomical pathology will increase the volume of specimens to be processed, as well as the complexity of pathology processes. In order for predictive analytics to address managerial challenges associated with the volume and complexity increases, it is important to pinpoint the areas where pathology managers would most benefit from predictive capabilities. We illustrate common issues in managing pathology facilities with an analysis of the surgical specimen process at the Department of Pathology and Laboratory Medicine (DPLM) at The Ottawa Hospital, which processes all surgical specimens for the Eastern Ontario Regional Laboratory Association. We then show how predictive analytics could be used to support management. Our proposed approach can be generalized beyond the DPLM, contributing to a more effective management of pathology facilities and in turn to quicker clinical diagnoses.

  8. Rainier Biogas Manure Management and Renewable Energy Generation Facility

    Energy Technology Data Exchange (ETDEWEB)

    Smyth, John [King County, WA (United States)

    2017-06-06

    The Rainier Biogas project is a community manure processing and renewable energy generation facility. Construction was completed and operation initiated in 2012. It is owned and operated by Rainier Biogas, LLC in collaboration with local dairy farmers, Washington State University, and the King County Department of Natural Resources and Parks. The project receives manure from three to four partner dairy farms mostly by underground pipe. The project is located at 43218 208th Ave SE; Enumclaw, WA 98022.

  9. Robotics for radioactive waste management in AEA technology facilities

    International Nuclear Information System (INIS)

    Legg, S.A.; Watson, C.J.H.; Staples, A.

    1992-01-01

    This paper describes the use of robotic technology in two AEA Technology facilities. In the first application, the task is standardized and repetitive, and is undertaken using a conventional industrial robot, operating in teach-and-repeat mode. In the second application, the task is non-repetitive, and requires the use of a variety of different tools. it is therefore undertaken by a nuclear engineered telerobot, with a tool change station

  10. A Change Management Approach to Enhance Facility Maintenance Programs

    Science.gov (United States)

    2014-03-27

    second Delphi rounds. The researcher analyzes the responses from the first round and performs qualitative coding to generate common themes...provided the steps to collect qualitative data from SMEs to help enhance the implementation procedures for BUILDER TM . The Delphi study technique was...key AM principles such as asset condition and remaining service life. A Delphi study was utilized to elicit expert field knowledge on facility

  11. Operation And Maintenance In Facilities Management Practices: A Gap Analysis In Malaysia

    Directory of Open Access Journals (Sweden)

    Zawawi Zuraihana Ahmad

    2016-01-01

    Full Text Available Facilities management in Malaysia has started as early as 1990s during the development of mega projects such as Putrajaya in 1999 [8, 9]. During this period, Malaysia was introduced to an integrated property management and maintenance services known as facilities management. However, its implementation according to the standard practice is still being disputed. The purpose of facilities management standard practices is to provide the facility management profession with a leading reference on facilities management activities and standards. Therefore, the determination of how far the gap in FM current practice is essential to help our FM industry. Thus, the aim of this study is to establish the gap between the current practices and the standard practices and also how far the gap should be satisfied. A set of questionnaire was designed upon literature and previous research done to gather the required information. The study is subjected to FM organizations in private sectors and only the personnel at management level are assessed. There were certified that most of the practices that assessed by means of gap analysis had an acceptable result which the gap between the current practices and the standard practices are not too far.

  12. Development of aging management standard guidelines for HVAC facilities of NPPs in Korea

    International Nuclear Information System (INIS)

    Won, Se Youl; Lee, Jae Gon; Oh, Seung Jin

    2014-01-01

    Inspection and maintenance activities for air conditioning facilities within the plant are managed mainly for active facilities, and as the years of operation pass, a method for detecting in advance aging-related integrity problems of passive facilities and taking necessary measures against them is required. Therefore, this paper establishes a standard aging management guideline for air conditioning facilities by selecting systems for which those facilities are to be managed, analyzing degradation mechanisms and reviewing the current status of aging degradation management. According to the review of additional equipment-specific aging degradation mechanisms and the current status of management to apply the aging degradation program to air conditioning facilities, it has been found that internal and external visual inspection procedures for fans, dampers, coils, filters and housings have to be added. It has been confirmed that among additional equipment s, fire dampers, fan bearings and belts and air cleaning/conditioning units with charcoal filters do not require additional inspection as they are periodically inspected. It has been found, however, that air cleaning/conditioning units without charcoal filters are to be inspected along with fans, ducts and coils

  13. Does identity shape leadership and management practice? Experiences of PHC facility managers in Cape Town, South Africa.

    Science.gov (United States)

    Daire, Judith; Gilson, Lucy

    2014-09-01

    In South Africa, as elsewhere, Primary Health Care (PHC) facilities are managed by professional nurses. Little is known about the dimensions and challenges of their job, or what influences their managerial practice. Drawing on leadership and organizational theory, this study explored what the job of being a PHC manager entails, and what factors influence their managerial practice. We specifically considered whether the appointment of professional nurses as facility managers leads to an identity transition, from nurse to manager. The overall intention was to generate ideas about how to support leadership development among PHC facility managers. Adopting case study methodology, the primary researcher facilitated in-depth discussions (about their personal history and managerial experiences) with eight participating facility managers from one geographical area. Other data were collected through in-depth interviews with key informants, document review and researcher field notes/journaling. Analysis involved data triangulation, respondent and peer review and cross-case analysis. The experiences show that the PHC facility manager's job is dominated by a range of tasks and procedures focused on clinical service management, but is expected to encompass action to address the population and public health needs of the surrounding community. Managing with and through others, and in a complex system, requiring self-management, are critical aspects of the job. A range of personal, professional and contextual factors influence managerial practice, including professional identity. The current largely facility-focused management practice reflects the strong nursing identity of managers and broader organizational influences. However, three of the eight managers appear to self-identify an emerging leadership identity and demonstrate related managerial practices. Nonetheless, there is currently limited support for an identity transition towards leadership in this context. Better

  14. Decommissioning of Rio Algom's quirke and panel mines waste management facilities

    International Nuclear Information System (INIS)

    Payne, R.A.

    1994-01-01

    With the completion of the production for British and American long-term uranium supply contracts in 1989/90, Rio Algom Limited, Elliot Lake Division, was faced with little hope for future contracts due to the low grade nature of the operations and a depressed uranium market. On January 24, 1990, Rio Algom Limited announced the pending closure of two of its three underground uranium mines, namely Quirke and Panel Mines which actually ceased operation on August 31, 1990. This paper addresses the proposed decommissioning of the two mines. The regulatory regime is presented together with an overview of all legislation related to uranium mine closure, decommissioning and, in particular, the compliance requirements of the AECB (Atomic Energy Control Board)-the lead regulatory agency. The primary concerns to be addressed in the closure of the Elliot Lake operations are the potential long-term production of acidity from the oxidation of the pyrite in the tailings together with the release of radioactive material. The closure plan for the tailings management areas has been developed to specifically address these tow issues. In the preparation of the plan, Rio Algom addressed several closure options prior to selecting permanent flooding of the tailings. These options and the reasons for selecting open-quotes flooded tailingsclose quotes are described. The decommissioning process is now in progress and is described in detail, particularly addressing those issues of concern to both the regulatory agencies and the Company. The present situation together with the company's expectations for the future are presented

  15. Project management for the decommissioning and dismantling of nuclear facilities

    International Nuclear Information System (INIS)

    Klasen, Joerg; Wilhelm, Oliver; Seizer, Burkhard; Schuetz, Tobias

    2015-01-01

    The decommissioning of nuclear power plants is executed in a classic project manner as it is known from other construction projects. It is obvious to use the known portfolio of project management tools. The complexity that is created by the large size of the project in combination with safety requirements of the nuclear industry has to be handled. Complexity can only be managed addressing two main drivers: Prioritization and speed (agility) in project execution. Prioritization can be realized by applying tools like Earned Value Management. A high speed of project execution is established by applying Agile Management like SCRUM-methods. This method is adopted in the context of the cooperation ''Complex Projects'' to the needs of nuclear industry.

  16. Waste management facilities cost information for transuranic waste

    International Nuclear Information System (INIS)

    Shropshire, D.; Sherick, M.; Biagi, C.

    1995-06-01

    This report contains preconceptual designs and planning level life-cycle cost estimates for managing transuranic waste. The report's information on treatment and storage modules can be integrated to develop total life-cycle costs for various waste management options. A procedure to guide the U.S. Department of Energy and its contractor personnel in the use of cost estimation data is also summarized in this report

  17. Construction of BIM-based SMART-ITL Facility Management System

    International Nuclear Information System (INIS)

    Jeon, Woo-Jin; Yi, Sung-Jae; Park, Hyun-Sik; Ryu, Sung-Uk; Bae, Hwang; Hwang, Sang-Chul; Min, Byung-Eui

    2015-01-01

    The flow area and volume are scaled down to 1/49. The ratio of the hydraulic diameter is 1/7. Therefore, SMART-ITL is a large-scale thermalhydraulic test facility with about 45 m height, which is consisted of 10 m underground and 35 m from the ground level. Until now, the management of design data and maintenance of large scale test facilities have been managed based on hard-copy information. Recently, Thermal Hydraulics Safety Research Division (THSRD) at Korea Atomic Energy Research Institute (KAERI) has developed Facility Management System (FMS) based Building Information Modeling (BIM) to manage its design data more effectively for these large scale test facilities of SMART-ITL and ATLAS, and this BIM technology has been applied to SMART-ITL at the first. This study proposed a method of effective management and maintenance of design data applied to the SMART-ITL. That is, a FMS was developed based on the BIM technology for SMART-ITL. Figure 2 shows an overview of FMS development process based on BIM technology. SMART-ITL FMS facilitates its management and maintenance more effectively and accurately by 3- dimensional visualization. It enables the shape information of large scale test facilities to be visualized intuitively in a virtual space, and the efficient maintenance of data and instruments is possible by linking 3D shape information

  18. Construction of BIM-based SMART-ITL Facility Management System

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Woo-Jin; Yi, Sung-Jae; Park, Hyun-Sik; Ryu, Sung-Uk; Bae, Hwang [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Hwang, Sang-Chul; Min, Byung-Eui [DDRsoft Co., Daejeon (Korea, Republic of)

    2015-10-15

    The flow area and volume are scaled down to 1/49. The ratio of the hydraulic diameter is 1/7. Therefore, SMART-ITL is a large-scale thermalhydraulic test facility with about 45 m height, which is consisted of 10 m underground and 35 m from the ground level. Until now, the management of design data and maintenance of large scale test facilities have been managed based on hard-copy information. Recently, Thermal Hydraulics Safety Research Division (THSRD) at Korea Atomic Energy Research Institute (KAERI) has developed Facility Management System (FMS) based Building Information Modeling (BIM) to manage its design data more effectively for these large scale test facilities of SMART-ITL and ATLAS, and this BIM technology has been applied to SMART-ITL at the first. This study proposed a method of effective management and maintenance of design data applied to the SMART-ITL. That is, a FMS was developed based on the BIM technology for SMART-ITL. Figure 2 shows an overview of FMS development process based on BIM technology. SMART-ITL FMS facilitates its management and maintenance more effectively and accurately by 3- dimensional visualization. It enables the shape information of large scale test facilities to be visualized intuitively in a virtual space, and the efficient maintenance of data and instruments is possible by linking 3D shape information.

  19. Materials and Fuels Complex Facilities Radioactive Waste Management Basis and DOE Manual 435.1-1 Compliance Tables

    Energy Technology Data Exchange (ETDEWEB)

    Lisa Harvego; Brion Bennett

    2011-09-01

    Department of Energy Order 435.1, 'Radioactive Waste Management,' along with its associated manual and guidance, requires development and maintenance of a radioactive waste management basis for each radioactive waste management facility, operation, and activity. This document presents a radioactive waste management basis for Idaho National Laboratory's Materials and Fuels Complex facilities that manage radioactive waste. The radioactive waste management basis for a facility comprises existing laboratory-wide and facility-specific documents. Department of Energy Manual 435.1-1, 'Radioactive Waste Management Manual,' facility compliance tables also are presented for the facilities. The tables serve as a tool for developing the radioactive waste management basis.

  20. Advanced Test Reactor Complex Facilities Radioactive Waste Management Basis and DOE Manual 435.1-1 Compliance Tables

    Energy Technology Data Exchange (ETDEWEB)

    Lisa Harvego; Brion Bennett

    2011-11-01

    U.S. Department of Energy Order 435.1, 'Radioactive Waste Management,' along with its associated manual and guidance, requires development and maintenance of a radioactive waste management basis for each radioactive waste management facility, operation, and activity. This document presents a radioactive waste management basis for Idaho National Laboratory's Advanced Test Reactor Complex facilities that manage radioactive waste. The radioactive waste management basis for a facility comprises existing laboratory-wide and facility-specific documents. U.S. Department of Energy Manual 435.1-1, 'Radioactive Waste Management Manual,' facility compliance tables also are presented for the facilities. The tables serve as a tool to develop the radioactive waste management basis.

  1. Value Adding Management (VAM) of buildings and facility services in four steps

    NARCIS (Netherlands)

    van der Voordt, Theo; Jensen, Per Anker; Hoendervanger, Jan Gerard; Bergsma, Feike

    2016-01-01

    This paper presents a new Value Adding Management (VAM) model that aims to support decision makers in identifying appropriate interventions in buildings, other facilities and services that add value to the organisation, to manage its implementation, and to measure the output and outcomes. The paper

  2. Bureau of Indian Affairs Schools: New Facilities Management Information System Promising, but Improved Data Accuracy Needed.

    Science.gov (United States)

    General Accounting Office, Washington, DC.

    A General Accounting Office (GAO) study evaluated the Bureau of Indian Affairs' (BIA) new facilities management information system (FMIS). Specifically, the study examined whether the new FMIS addresses the old system's weaknesses and meets BIA's management needs, whether BIA has finished validating the accuracy of data transferred from the old…

  3. Facilities management innovation in public-private collaborations: Danish ESCO projects

    DEFF Research Database (Denmark)

    Nardelli, Giulia; Jensen, Jesper Ole; Nielsen, Susanne Balslev

    2015-01-01

    The purpose of the article is to investigate how Facilities Management (FM) units navigate Energy Service Company (ESCO) collaborations, here defined as examples of public collaborative innovation within the context of FM. The driving motivation is to inform and inspire internal FM units of local...... institutions on how to navigate and manage collaboration of different, intra- and inter-organisational actors throughout ESCO projects.......The purpose of the article is to investigate how Facilities Management (FM) units navigate Energy Service Company (ESCO) collaborations, here defined as examples of public collaborative innovation within the context of FM. The driving motivation is to inform and inspire internal FM units of local...

  4. Native American Technical Assistance and Training for Renewable Energy Resource Development and Electrical Generation Facilities Management

    Energy Technology Data Exchange (ETDEWEB)

    A. David Lester

    2008-10-17

    The Council of Energy Resource Tribes (CERT) will facilitate technical expertise and training of Native Americans in renewable energy resource development for electrical generation facilities, and distributed generation options contributing to feasibility studies, strategic planning and visioning. CERT will also provide information to Tribes on energy efficiency and energy management techniques.This project will provide facilitation and coordination of expertise from government agencies and private industries to interact with Native Americans in ways that will result in renewable energy resource development, energy efficiency program development, and electrical generation facilities management by Tribal entities. The intent of this cooperative agreement is to help build capacity within the Tribes to manage these important resources.

  5. Waste Acceptance Decisions and Uncertainty Analysis at the Oak Ridge Environmental Management Waste Management Facility

    Energy Technology Data Exchange (ETDEWEB)

    Redus, K. S.; Patterson, J. E.; Hampshire, G. L.; Perkins, A. B.

    2003-02-25

    The Waste Acceptance Criteria (WAC) Attainment Team (AT) routinely provides the U.S. Department of Energy (DOE) Oak Ridge Operations with Go/No-Go decisions associated with the disposition of over 1.8 million yd3 of low-level radioactive, TSCA, and RCRA hazardous waste. This supply of waste comes from 60+ environmental restoration projects over the next 15 years planned to be dispositioned at the Oak Ridge Environmental Management Waste Management Facility (EMWMF). The EMWMF WAC AT decision making process is accomplished in four ways: (1) ensure a clearly defined mission and timeframe for accomplishment is established, (2) provide an effective organization structure with trained personnel, (3) have in place a set of waste acceptance decisions and Data Quality Objectives (DQO) for which quantitative measures are required, and (4) use validated risk-based forecasting, decision support, and modeling/simulation tools. We provide a summary of WAC AT structure and performance. We offer suggestions based on lessons learned for effective transfer to other DOE.

  6. Waste Acceptance Decisions and Uncertainty Analysis at the Oak Ridge Environmental Management Waste Management Facility

    International Nuclear Information System (INIS)

    Redus, K. S.; Patterson, J. E.; Hampshire, G. L.; Perkins, A. B.

    2003-01-01

    The Waste Acceptance Criteria (WAC) Attainment Team (AT) routinely provides the U.S. Department of Energy (DOE) Oak Ridge Operations with Go/No-Go decisions associated with the disposition of over 1.8 million yd3 of low-level radioactive, TSCA, and RCRA hazardous waste. This supply of waste comes from 60+ environmental restoration projects over the next 15 years planned to be dispositioned at the Oak Ridge Environmental Management Waste Management Facility (EMWMF). The EMWMF WAC AT decision making process is accomplished in four ways: (1) ensure a clearly defined mission and timeframe for accomplishment is established, (2) provide an effective organization structure with trained personnel, (3) have in place a set of waste acceptance decisions and Data Quality Objectives (DQO) for which quantitative measures are required, and (4) use validated risk-based forecasting, decision support, and modeling/simulation tools. We provide a summary of WAC AT structure and performance. We offer suggestions based on lessons learned for effective transfer to other DOE

  7. Facility accident considerations in the US Department of Energy Waste Management Program

    International Nuclear Information System (INIS)

    Mueller, C.

    1994-01-01

    A principal consideration in developing waste management strategies is the relative importance of Potential radiological and hazardous releases to the environment during postulated facility accidents with respect to protection of human health and the environment. The Office of Environmental Management (EM) within the US Department of Energy (DOE) is currently formulating an integrated national program to manage the treatment, storage, and disposal of existing and future wastes at DOE sites. As part of this process, a Programmatic Environmental impact Statement (PEIS) is being prepared to evaluate different waste management alternatives. This paper reviews analyses that have been Performed to characterize, screen, and develop source terms for accidents that may occur in facilities used to store and treat the waste streams considered in these alternatives. Preliminary results of these analyses are discussed with respect to the comparative potential for significant releases due to accidents affecting various treatment processes and facility configurations. Key assumptions and sensitivities are described

  8. Improving heart failure disease management in skilled nursing facilities: lessons learned.

    Science.gov (United States)

    Dolansky, Mary A; Hitch, Jeanne A; Piña, Ileana L; Boxer, Rebecca S

    2013-11-01

    The purpose of the study was to design and evaluate an improvement project that implemented HF management in four skilled nursing facilities (SNFs). Kotter's Change Management principles were used to guide the implementation. In addition, half of the facilities had an implementation coach who met with facility staff weekly for 4 months and monthly for 5 months. Weekly and monthly audits were performed that documented compliance with eight key aspects of the protocol. Contextual factors were captured using field notes. Adherence to the HF management protocols was variable ranging from 17% to 82%. Facilitators of implementation included staff who championed the project, an implementation coach, and physician involvement. Barriers were high staff turnover and a hierarchal culture. Opportunities exist to integrate HF management protocols to improve SNF care.

  9. Screensaver: an open source lab information management system (LIMS) for high throughput screening facilities.

    Science.gov (United States)

    Tolopko, Andrew N; Sullivan, John P; Erickson, Sean D; Wrobel, David; Chiang, Su L; Rudnicki, Katrina; Rudnicki, Stewart; Nale, Jennifer; Selfors, Laura M; Greenhouse, Dara; Muhlich, Jeremy L; Shamu, Caroline E

    2010-05-18

    Shared-usage high throughput screening (HTS) facilities are becoming more common in academe as large-scale small molecule and genome-scale RNAi screening strategies are adopted for basic research purposes. These shared facilities require a unique informatics infrastructure that must not only provide access to and analysis of screening data, but must also manage the administrative and technical challenges associated with conducting numerous, interleaved screening efforts run by multiple independent research groups. We have developed Screensaver, a free, open source, web-based lab information management system (LIMS), to address the informatics needs of our small molecule and RNAi screening facility. Screensaver supports the storage and comparison of screening data sets, as well as the management of information about screens, screeners, libraries, and laboratory work requests. To our knowledge, Screensaver is one of the first applications to support the storage and analysis of data from both genome-scale RNAi screening projects and small molecule screening projects. The informatics and administrative needs of an HTS facility may be best managed by a single, integrated, web-accessible application such as Screensaver. Screensaver has proven useful in meeting the requirements of the ICCB-Longwood/NSRB Screening Facility at Harvard Medical School, and has provided similar benefits to other HTS facilities.

  10. Screensaver: an open source lab information management system (LIMS for high throughput screening facilities

    Directory of Open Access Journals (Sweden)

    Nale Jennifer

    2010-05-01

    Full Text Available Abstract Background Shared-usage high throughput screening (HTS facilities are becoming more common in academe as large-scale small molecule and genome-scale RNAi screening strategies are adopted for basic research purposes. These shared facilities require a unique informatics infrastructure that must not only provide access to and analysis of screening data, but must also manage the administrative and technical challenges associated with conducting numerous, interleaved screening efforts run by multiple independent research groups. Results We have developed Screensaver, a free, open source, web-based lab information management system (LIMS, to address the informatics needs of our small molecule and RNAi screening facility. Screensaver supports the storage and comparison of screening data sets, as well as the management of information about screens, screeners, libraries, and laboratory work requests. To our knowledge, Screensaver is one of the first applications to support the storage and analysis of data from both genome-scale RNAi screening projects and small molecule screening projects. Conclusions The informatics and administrative needs of an HTS facility may be best managed by a single, integrated, web-accessible application such as Screensaver. Screensaver has proven useful in meeting the requirements of the ICCB-Longwood/NSRB Screening Facility at Harvard Medical School, and has provided similar benefits to other HTS facilities.

  11. Challenges in the management of decommission waste of nuclear facilities in Ghana

    International Nuclear Information System (INIS)

    Glover, E.T.; Fletcher, J.J.

    2002-01-01

    It is inevitable that every nuclear facility must one day be safely decommissioned. When considering decommissioning, large amounts of radioactive and non-radioactive waste have to be taken into account. Disposal of such materials can have large economic impact on the overall decommissioning cost. In developing countries like Ghana, the perception of environmental protection through waste management, is often not very high as compared to many other pressing needs. Therefore limited resources are allocated for environmental problems. Ghana operates a tank-in- pool type research reactor, 30kW output for research in neutron activation analysis, radioisotope preparation, education and training, a radiotherapy unit that utilizes a 185TBq Co-60 radioactive sources for the treatment of cancer and a gamma irradiation facility which utilizes 1.85PBq Co-60 radioactive source for the irradiation of various materials. All these facilities are operating without designed decommissioning in mind, an inadequate waste management infrastructure as well as a lack of a repository to handling the resulting waste. It is today's beneficials of the nuclear facility that has to deal with the legacies of the future decommissioning activities. The paper outlines some of the challenges and issues to be expected in the management of waste from future decommissioning of nuclear facilities in Ghana with the absence of a waste management infrastructure and inadequate financial resources. The paper puts forth a concept to perform meaningful and significant plans whilst the facilities are still operating. (author)

  12. Barriers to Optimal Pain Management in Aged Care Facilities: An Australian Qualitative Study.

    Science.gov (United States)

    Veal, Felicity; Williams, Mackenzie; Bereznicki, Luke; Cummings, Elizabeth; Thompson, Angus; Peterson, Gregory; Winzenberg, Tania

    2017-11-15

    Up to 80% of residents in aged care facilities (ACFs) experience pain, which is often suboptimally managed. To characterize pain management in ACFs and identify the barriers to optimal pain management. An exploratory descriptive qualitative study using semistructured interviews. Five Southern Tasmania, Australian ACFs. 23 staff members (18 nurses and 5 facility managers). Interviews were conducted from September to November 2015. Interviews included questions about how pain was measured or assessed, what happened if pain was identified, barriers to pain management, and potential ways to overcome these barriers. Interviewees noted that there were no formal requirements regarding pain assessment at the ACFs reviewed; however, pain was often informally assessed. Staff noted the importance of adequate pain management for the residents' quality of life and employed both nonpharmacologic and pharmacologic techniques to reduce pain when identified. The barriers to optimal pain management included difficulty identifying and assessing pain, residents' resistance to reporting pain and/or taking medications, and communication barriers between the nursing staff and GPs. Staff interviewed were dedicated to managing residents' pain effectively; however, actions in a number of areas could improve resident outcomes. These include a more consistent approach to documenting pain in residents' progress notes and improving nurse-GP communications to ensure that new or escalating pain is identified and expedient changes can be made to the resident's management. Additionally, resident, family, nurse, and carer education, conducted within the facilities on a regular basis, could help improve the pain management of residents. Copyright © 2017. Published by Elsevier Inc.

  13. Inputs to quality: supervision, management, and community involvement in health facilities in Egypt in 2004

    Directory of Open Access Journals (Sweden)

    Krumholz Harlan M

    2011-10-01

    Full Text Available Abstract Background As low- and middle-income countries experience economic development, ensuring quality of health care delivery is a central component of health reform. Nevertheless, health reforms in low- and middle-income countries have focused more on access to services rather than the quality of these services, and reporting on quality has been limited. In the present study, we sought to examine the prevalence and regional variation in key management practices in Egyptian health facilities within three domains: supervision of the facility from the Ministry of Health and Population (MOHP, managerial processes, and patient and community involvement in care. Methods We conducted a cross-sectional analysis of data from 559 facilities surveyed with the Egyptian Service Provision Assessment (ESPA survey in 2004, the most recent such survey in Egypt. We registered on the Measure Demographic and Health Survey (DHS website http://legacy.measuredhs.com/login.cfm to gain access to the survey data. From the ESPA sampled 559 MOHP facilities, we excluded a total of 79 facilities because they did not offer facility-based 24-hour care or have at least one physician working in the facility, resulting in a final sample of 480 facilities. The final sample included 76 general service hospitals, 307 rural health units, and 97 maternal and child health and urban health units (MCH/urban units. We used standard frequency analyses to describe facility characteristics and tested the statistical significance of regional differences using chi-square statistics. Results Nearly all facilities reported having external supervision within the 6 months preceding the interview. In contrast, key facility-level managerial processes, such as having routine and documented management meetings and applying quality assurance approaches, were uncommon. Involvement of communities and patients was also reported in a minority of facilities. Hospitals and health units located in Urban

  14. Environmental Management Waste Management Facility (EMWMF) Site-Specific Health and Safety Plan, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Flynn, N.C. Bechtel Jacobs

    2008-04-21

    The Bechtel Jacobs Company LLC (BJC) policy is to provide a safe and healthy workplace for all employees and subcontractors. The implementation of this policy requires that operations of the Environmental Management Waste Management Facility (EMWMF), located one-half mile west of the U.S. Department of Energy (DOE) Y-12 National Security Complex, be guided by an overall plan and consistent proactive approach to environment, safety and health (ES&H) issues. The BJC governing document for worker safety and health, BJC/OR-1745, 'Worker Safety and Health Program', describes the key elements of the BJC Safety and Industrial Hygiene (IH) programs, which includes the requirement for development and implementation of a site-specific Health and Safety Plan (HASP) where required by regulation (refer also to BJC-EH-1012, 'Development and Approval of Safety and Health Plans'). BJC/OR-1745, 'Worker Safety and Health Program', implements the requirements for worker protection contained in Title 10 Code of Federal Regulations (CFR) Part 851. The EMWMF site-specific HASP requirements identifies safe operating procedures, work controls, personal protective equipment, roles and responsibilities, potential site hazards and control measures, site access requirements, frequency and types of monitoring, site work areas, decontamination procedures, and outlines emergency response actions. This HASP will be available on site for use by all workers, management and supervisors, oversight personnel and visitors. All EMWMF assigned personnel will be briefed on the contents of this HASP and will be required to follow the procedures and protocols as specified. The policies and procedures referenced in this HASP apply to all EMWMF operations activities. In addition the HASP establishes ES&H criteria for the day-to-day activities to prevent or minimize any adverse effect on the environment and personnel safety and health and to meet standards that define acceptable

  15. Uranium Mill Tailings Remedial Action Project Environmental Line Management Audit Action Plan. Final report. Audit, October 26, 1992--November 6, 1992

    International Nuclear Information System (INIS)

    1993-07-01

    This Action Plan contains responses, planned actions, and estimated costs for addressing the findings discovered in the Environmental Management Audit conducted for the U.S. Department of Energy (DOE) Uranium Mill Tailings Remedial Action Project (UMTRA), October 26 through November 6, 1992. This document should be read in conjunction with the Audit Report to ensure the findings addressed in this document are fully understood. The scope of the UMTRA Environmental Management Audit was comprehensive and encompassed all areas of environmental management except environmental programs pertaining to the National Environmental Policy Act (NEPA) compliance. The Audit Report listed 18 findings: 11 were identified as compliance findings, and the remaining 7 were best management practice findings. Root cause analysis was performed on all the findings. The results of the analysis as well as planned corrective actions are summarized in Section 5.0. All planned actions were prioritized using the Tiger Team Assessment Corrective Action Plan system. Based on assigned priorities, all planned actions were costed by fiscal year. This Action Plan contains a description of the organizational and management structures to be used to implement the Action Plan, a brief discussion of root cause analysis and funding, followed by the responses and planned actions for each finding. A member of the UMTRA Project Office (PO) has been assigned responsibility for tracking the progress on each of the findings. The UMTRA PO staff wrote and/or approved all of the corrective actions recorded in this Action Plan

  16. Recommendations for Emergency Management Planning for School Facilities.

    Science.gov (United States)

    Texas Education Agency, Austin.

    Numerous events, such as hurricanes, floods, and tornadoes, constitute a natural disaster for public schools. Human-caused disasters include hazardous-material emergencies, civil riots, fires, and nuclear accidents. This document contains emergency-management planning guidelines, developed by the Texas Education Agency, to help local school…

  17. Simulation Modeling of a Facility Layout in Operations Management Classes

    Science.gov (United States)

    Yazici, Hulya Julie

    2006-01-01

    Teaching quantitative courses can be challenging. Similarly, layout modeling and lean production concepts can be difficult to grasp in an introductory OM (operations management) class. This article describes a simulation model developed in PROMODEL to facilitate the learning of layout modeling and lean manufacturing. Simulation allows for the…

  18. Radioactive and mixed waste management plan for the Lawrence Berkeley Laboratory Hazardous Waste Handling Facility

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    This Radioactive and Mixed Waste Management Plan for the Hazardous Waste Handling Facility at Lawrence Berkeley Laboratory is written to meet the requirements for an annual report of radioactive and mixed waste management activities outlined in DOE Order 5820.2A. Radioactive and mixed waste management activities during FY 1994 listed here include principal regulatory and environmental issues and the degree to which planned activities were accomplished.

  19. Technology requirements to be addressed by the NASA Lewis Research Center Cryogenic Fluid Management Facility program

    Science.gov (United States)

    Aydelott, J. C.; Rudland, R. S.

    1985-01-01

    The NASA Lewis Research Center is responsible for the planning and execution of a scientific program which will provide advance in space cryogenic fluid management technology. A number of future space missions were identified that require or could benefit from this technology. These fluid management technology needs were prioritized and a shuttle attached reuseable test bed, the cryogenic fluid management facility (CFMF), is being designed to provide the experimental data necessary for the technology development effort.

  20. Use of the project management methodology to establish physical protection system at nuclear facility

    International Nuclear Information System (INIS)

    Gramotkin, F.; Kuzmyak, I.; Kravtsov, V.

    2015-01-01

    The paper considers the possibility of using the project management methodology developed by the Project Management Institute (USA) in nuclear security in terms of modernization or development of physical protection system at nuclear facility. It was demonstrated that this methodology allows competent and flexible management of the projects on physical protection, ensuring effective control of their timely implementation in compliance with the planned budget and quality

  1. Conceptual design report for the spent fuel management technology research and test (SMATER) facility

    Energy Technology Data Exchange (ETDEWEB)

    Park, S.W.; Ro, S.G.; Lee, J.S.; Min, D.K.; Shin, Y.J. [Korea Atomic Energy Research Institute, Taejon (Korea)

    1998-10-01

    This study was intended to develop concept for a pilot-scale remote operation facility for longer term management of spent fuel and therefrom to provide technical requirement for later basic design of the facility. Main scope of work for the study was to revise the past (1990) conceptual design in functions, scale, hot cell layout etc. based on user requirements. Technical reference was made to the PKA facility in Germany, through collaboration with appropriate partner, to elaborate the design and requirements. The study was focused on establishing design criteria and conceptual design of the SMATER facility. The results of this study should be an essential and useful basis upon optimization for further work to basic design of the facility. (author). 17 figs., 12 tabs.

  2. PIMS sequencing extension: a laboratory information management system for DNA sequencing facilities.

    Science.gov (United States)

    Troshin, Peter V; Postis, Vincent Lg; Ashworth, Denise; Baldwin, Stephen A; McPherson, Michael J; Barton, Geoffrey J

    2011-03-07

    Facilities that provide a service for DNA sequencing typically support large numbers of users and experiment types. The cost of services is often reduced by the use of liquid handling robots but the efficiency of such facilities is hampered because the software for such robots does not usually integrate well with the systems that run the sequencing machines. Accordingly, there is a need for software systems capable of integrating different robotic systems and managing sample information for DNA sequencing services. In this paper, we describe an extension to the Protein Information Management System (PIMS) that is designed for DNA sequencing facilities. The new version of PIMS has a user-friendly web interface and integrates all aspects of the sequencing process, including sample submission, handling and tracking, together with capture and management of the data. The PIMS sequencing extension has been in production since July 2009 at the University of Leeds DNA Sequencing Facility. It has completely replaced manual data handling and simplified the tasks of data management and user communication. Samples from 45 groups have been processed with an average throughput of 10000 samples per month. The current version of the PIMS sequencing extension works with Applied Biosystems 3130XL 96-well plate sequencer and MWG 4204 or Aviso Theonyx liquid handling robots, but is readily adaptable for use with other combinations of robots. PIMS has been extended to provide a user-friendly and integrated data management solution for DNA sequencing facilities that is accessed through a normal web browser and allows simultaneous access by multiple users as well as facility managers. The system integrates sequencing and liquid handling robots, manages the data flow, and provides remote access to the sequencing results. The software is freely available, for academic users, from http://www.pims-lims.org/.

  3. PIMS sequencing extension: a laboratory information management system for DNA sequencing facilities

    Directory of Open Access Journals (Sweden)

    Baldwin Stephen A

    2011-03-01

    Full Text Available Abstract Background Facilities that provide a service for DNA sequencing typically support large numbers of users and experiment types. The cost of services is often reduced by the use of liquid handling robots but the efficiency of such facilities is hampered because the software for such robots does not usually integrate well with the systems that run the sequencing machines. Accordingly, there is a need for software systems capable of integrating different robotic systems and managing sample information for DNA sequencing services. In this paper, we describe an extension to the Protein Information Management System (PIMS that is designed for DNA sequencing facilities. The new version of PIMS has a user-friendly web interface and integrates all aspects of the sequencing process, including sample submission, handling and tracking, together with capture and management of the data. Results The PIMS sequencing extension has been in production since July 2009 at the University of Leeds DNA Sequencing Facility. It has completely replaced manual data handling and simplified the tasks of data management and user communication. Samples from 45 groups have been processed with an average throughput of 10000 samples per month. The current version of the PIMS sequencing extension works with Applied Biosystems 3130XL 96-well plate sequencer and MWG 4204 or Aviso Theonyx liquid handling robots, but is readily adaptable for use with other combinations of robots. Conclusions PIMS has been extended to provide a user-friendly and integrated data management solution for DNA sequencing facilities that is accessed through a normal web browser and allows simultaneous access by multiple users as well as facility managers. The system integrates sequencing and liquid handling robots, manages the data flow, and provides remote access to the sequencing results. The software is freely available, for academic users, from http://www.pims-lims.org/.

  4. DEVELOPMENT OF BIM/GIS INTEROPERABLE PLATFORM FOR FACILITY MANAGEMENT IN KOREA

    OpenAIRE

    Chunjoo Yoon; Changhee Hong

    2017-01-01

    South Korea is making facility design using Building Information Modeling (BIM) mandatory and expanding the use of BIM. However, BIM technology has been used limitedly only from the design to construction phases but it has rarely been applied to the maintenance phase in Korea. To overcome this problem, data management and related technologies are needed during the entire life cycle of the facility construction process. This study developed a platform by which BIM data at the constru...

  5. Computer software configuration management plan for 200 East/West Liquid Effluent Facilities

    International Nuclear Information System (INIS)

    Graf, F.A. Jr.

    1995-01-01

    This computer software management configuration plan covers the control of the software for the monitor and control system that operates the Effluent Treatment Facility and its associated truck load in station and some key aspects of the Liquid Effluent Retention Facility that stores condensate to be processed. Also controlled is the Treated Effluent Disposal System's pumping stations and monitors waste generator flows in this system as well as the Phase Two Effluent Collection System

  6. Replacing natural wetlands with stormwater management facilities: biophysical and perceived social values

    OpenAIRE

    Rooney, R.C.; Foote, L.; Krogman, N.; Pattison, J.K.; Wilson, M.J.; Bayley, S.E.

    2015-01-01

    Urban expansion replaces wetlands of natural origin with artificial stormwater management facilities. The literature suggests that efforts to mimic natural wetlands in the design of stormwater facilities can expand the provision of ecosystem services. Policy developments seek to capitalize on these improvements, encouraging developers to build stormwater wetlands in place of stormwater ponds; however, few have compared the biophysical values and social perceptions of these created wetlands to...

  7. A local area network and information management system for a submarine overhaul facility

    OpenAIRE

    Bushmire, Jeffrey D

    1990-01-01

    A preliminary design of a local area network for a submarine overhaul facility is developed using System Engineering concepts. SOFLAN, the Submarine Overhaul Facility Local Area Network, is necessary to provide more timely and accurate information to submarine overhaul managers in order to decrease the overhaul time period and become more competitive. The network is a microcomputer based system following the Ethernet and IEEE 802.3 standards with a server .. client architecture. SOFLAN serves...

  8. Risk Management Technique for design and operation of facilities and equipment

    Science.gov (United States)

    Fedor, O. H.; Parsons, W. N.; Coutinho, J. De S.

    1975-01-01

    The Risk Management System collects information from engineering, operating, and management personnel to identify potentially hazardous conditions. This information is used in risk analysis, problem resolution, and contingency planning. The resulting hazard accountability system enables management to monitor all identified hazards. Data from this system are examined in project reviews so that management can decide to eliminate or accept these risks. This technique is particularly effective in improving the management of risks in large, complex, high-energy facilities. These improvements are needed for increased cooperation among industry, regulatory agencies, and the public.

  9. Fast flux test facility performance monitoring management information, July 1988

    Energy Technology Data Exchange (ETDEWEB)

    Newland, D J

    1988-08-01

    The purpose of this report is to provide management with performance data on key performance indicators selected from the FFTF Early Warning System performance indicators. This report contains the results for key performance indicators divided into two categories of ``overall`` and ``other.`` The ``overall`` performance indicators, when considered in the aggregate, provide one means of monitoring overall plant performance. The data should be used in conjunction with the results of other management assessment activities to focus improvement efforts. Use of these key performance indicators as a group is stressed, since focusing on a single indicator or a narrow set of indicators can be counterproductive both to safety and to long-term performance improvement.

  10. Rationalization of bioassay for radiation protection management in nuclear facilities

    International Nuclear Information System (INIS)

    Ishii, Keiichiro; Hattori, Takatoshi

    1989-01-01

    In this study, the objective is the rationalization of the technique of radiation protection management for internal irradiation, and we improved on utility of bioassay method. The major results obtained are as follows: 1. We develop the computing code which can analyze the behavior of excretion of radioactive nuclides and estimate the effective dose equivalent. And, we proposed the direct evaluation method of the effective dose equivalent of internal irradiation using the curve of the excretion. 2. We develop the Tiolet Monitor which can monitor the intake of 54 Mn, 137 Cs, etc. Practical screening level of Toilet Monitor is investigated as usable. 3. Any kinds of correction factors of bioassay data are investigated. 4. Practical usage of the bioassay system for management of internal irradiation protection is proposed. (author)

  11. Utilization Management in Department of Defense Military Treatment Facilities

    Science.gov (United States)

    1992-07-01

    unnecessary tests, both of which Dr. C. E. Jarret (1992), Director of Utilization Managewent/Quality Assurance, Baylor Medical Center , states can occur for...for Quality Assurance/Utilization Review, Baylor Medical Center , nurses are the backbone of an effective utilization management program. They are...to preadmission authorization. Baylor Medical Center uses one full-time nurse to do precertification, which equates to approximately 60 requests per

  12. CSNI Technical Opinion Papers No. 15 - Ageing management of nuclear fuel cycle facilities

    International Nuclear Information System (INIS)

    Nocture, Pierre; Daubard, Jean-Paul; Lhomme, Veronique; Martineau, Dominique; Blundell, Neil; Conte, Dorothee; Dobson, Martin; Gmal, Bernhard; Hiltz, Thomas; Ueda, Yoshinori

    2012-01-01

    Managing the ageing of fuel cycle facilities (FCFs) means, as for other nuclear installations, ensuring the availability of required safety functions throughout their service life while taking into account the changes that occur with time and use. This technical opinion paper identifies a set of good practices by benchmarking strategies and good practices on coping with physical ageing and obsolescence from the facility design stage until decommissioning. It should be of particular interest to nuclear safety regulators, fuel cycle facilities operators and fuel cycle researchers [fr

  13. Development of a spent fuel management technology research and test facility

    International Nuclear Information System (INIS)

    Park, S. W.; Noh, S. K.; Lee, J. S. and others

    1997-12-01

    This study was intended to develop concept for a pilot-scale remote operation facility for longer term management of spent fuel and therefrom to provide technical requirement for later basic design of the facility. Main scope of work for the study was to revise the past (1990) conceptual design in functions, scale, hot cell layout, etc. based on user requirements. Technical reference was made to the PKA facility in Germany, through collaboration with appropriate partner, to elaborate the design and requirements. A simulator of the conceptual design was also developed by use of virtual reality technique by 3-D computer graphics for equipment and building. (author). 18 tabs., 39 figs

  14. Adaptive management: a paradigm for remediation of public facilities following a terrorist attack.

    Science.gov (United States)

    Whicker, Jeffrey J; Janecky, David R; Doerr, Ted B

    2008-10-01

    Terrorist actions are aimed at maximizing harm (health, psychological, economical, and political) through the combined physical impacts of the act and fear. Immediate and effective response to a terrorist act is critical to limit human and environmental harm, effectively restore facility function, and maintain public confidence. Though there have been terrorist attacks in public facilities that we have learned from, overall our experiences in restoration of public facilities following a terrorist attack are limited. Restoration of public facilities following a release of a hazardous material is inherently far more complex than in industrial settings and has many unique technical, economic, social, and political challenges. For example, there may be a great need to quickly restore the facility to full operation and allow public access even though it was not designed for easy or rapid restoration, and critical information is needed for quantitative risk assessment and effective restoration must be anticipated to be incomplete and uncertain. Whereas present planning documents have substantial linearity in their organization, the "adaptive management" paradigm provides a constructive parallel paradigm for restoration of public facilities that anticipates and plans for uncertainty, inefficiencies, and stakeholder participation. Adaptive management grew out of the need to manage and restore natural resources in highly complex and changing environments with limited knowledge about causal relationships and responses to restoration actions. Similarities between natural resource management and restoration of a public facility after a terrorist attack suggest that integration of adaptive management principles explicitly into restoration processes will result in substantially enhanced and flexible responses necessary to meet the uncertainties of potential terrorist attacks.

  15. The Practice of Sustainable Facilities Management: Design Sentiments and the Knowledge Chasm

    Directory of Open Access Journals (Sweden)

    Abbas Elmualim

    2009-12-01

    Full Text Available The construction industry with its nature of project delivery is very fragmented in terms of the various processes that encompass design, construction, facilities and assets management. Facilities managers are in the forefront of delivering sustainable assets management and hence further the venture for mitigation and adaptation to climate change. A questionnaire survey was conducted to establish perceptions, level of commitment and knowledge chasm in practising sustainable facilities management (FM. This has significant implications for sustainable design management, especially in a fragmented industry. The majority of questionnaire respondents indicated the importance of sustainability for their organization. Many of them stated that they reported on sustainability as part of their organization annual reporting with energy efficiency, recycling and waste reduction as the main concern for them. The overwhelming barrier for implementing sound, sustainable FM is the lack of consensual understanding and focus of individuals and organizations about sustainability. There is a knowledge chasm regarding practical information on delivering sustainable FM. Sustainability information asymmetry in design, construction and FM processes render any sustainable design as a sentiment and mere design aspiration. Skills and training provision, traditionally offered separately to designers and facilities managers, needs to be re-evaluated. Sustainability education and training should be developed to provide effective structures and processes to apply sustainability throughout the construction and FM industries coherently and as common practice. Published in the Journal AEDM - Volume 5, Numbers 1-2, 2009 , pp. 91-102(12

  16. Radioactive Waste Management and Nuclear Facility Decommissioning Progress in Iraq - 13216

    International Nuclear Information System (INIS)

    Al-Musawi, Fouad; Shamsaldin, Emad S.; Jasim, Hadi; Cochran, John R.

    2013-01-01

    Management of Iraq's radioactive wastes and decommissioning of Iraq's former nuclear facilities are the responsibility of Iraq's Ministry of Science and Technology (MoST). The majority of Iraq's former nuclear facilities are in the Al-Tuwaitha Nuclear Research Center located a few kilometers from the edge of Baghdad. These facilities include bombed and partially destroyed research reactors, a fuel fabrication facility and radioisotope production facilities. Within these facilities are large numbers of silos, approximately 30 process or waste storage tanks and thousands of drums of uncharacterised radioactive waste. There are also former nuclear facilities/sites that are outside of Al-Tuwaitha and these include the former uranium processing and waste storage facility at Jesira, the dump site near Adaya, the former centrifuge facility at Rashdiya and the former enrichment plant at Tarmiya. In 2005, Iraq lacked the infrastructure needed to decommission its nuclear facilities and manage its radioactive wastes. The lack of infrastructure included: (1) the lack of an organization responsible for decommissioning and radioactive waste management, (2) the lack of a storage facility for radioactive wastes, (3) the lack of professionals with experience in decommissioning and modern waste management practices, (4) the lack of laws and regulations governing decommissioning or radioactive waste management, (5) ongoing security concerns, and (6) limited availability of electricity and internet. Since its creation eight years ago, the MoST has worked with the international community and developed an organizational structure, trained staff, and made great progress in managing radioactive wastes and decommissioning Iraq's former nuclear facilities. This progress has been made, despite the very difficult implementing conditions in Iraq. Within MoST, the Radioactive Waste Treatment and Management Directorate (RWTMD) is responsible for waste management and the Iraqi Decommissioning

  17. The Mixed Waste Management Facility monthly report, October 1994

    Energy Technology Data Exchange (ETDEWEB)

    Streit, R.

    1994-11-01

    During October, significant progress was made on both the management and technical activities of the Project. These activities were accomplished within the scope and effort described in the MWMF FY95 Plan (currently in draft within the Project), which reflects the reduced DOE FY95 funding guidance received September 29, 1994. DOE/OAK approved Revision 1 of the MWMF Baseline (reflecting KD-1 guidance), thus providing a basis for Revision 2 (reflecting DWTF/MWW integration). Considerable management and senior-engineering resources were directed toward addressing the issues that are summarized below. The proposed technical scope and schedule for the FY95 Plan was largely completed during October, along with consistent (but less detailed) tasks and estimates for the remainder of the project; this latter information will also be used as a basis for the Rebaseline. However, the FY95 Plan cannot be finalized until mid-November when LLNL tax rates will be established. MWMF project personnel completed most of the input and draft documentation required by the LLNL permitting group to prepare the modified RD&D permit application that reflects the DWTF/MWMF integration. The PSAR continued through the LLNL approval chain. Revisions to the EA began to reflect the DWTF/MWMF integration. Two significant reviews of the project were addressed: the DOE Office of the Inspector General (OIG) and the Options Analysis Team (OAT). Draft documents were prepared and discussed with DOE/OAK and HQ to provide for a coordinated response.

  18. The European HST Science Data Archive. [and Data Management Facility (DMF)

    Science.gov (United States)

    Pasian, F.; Pirenne, B.; Albrecht, R.; Russo, G.

    1993-01-01

    The paper describes the European HST Science Data Archive. Particular attention is given to the flow from the HST spacecraft to the Science Data Archive at the Space Telescope European Coordinating Facility (ST-ECF); the archiving system at the ST-ECF, including the hardware and software system structure; the operations at the ST-ECF and differences with the Data Management Facility; and the current developments. A diagram of the logical structure and data flow of the system managing the European HST Science Data Archive is included.

  19. Risk management for existing energy facilities. A global approach to numerical safety goals

    International Nuclear Information System (INIS)

    Pate-Cornell, M.E.

    1993-01-01

    This paper presents a structured set of numerical safety goals for risk management of existing energy facilities. The rationale behind these safety goals is based on principles of equity and economic efficiency. Some of the issues involved when using probabilistic risk analyses results for safety decisions are discussed. A brief review of existing safety targets and open-quotes floating numbersclose quotes is presented, and a set of safety goals for industrial risk management is proposed. Relaxation of these standards for existing facilities, the relevance of the lifetime of the plant, the treatment of uncertainties, and problems of failure dependencies are discussed briefly. 17 refs., 1 fig

  20. Soil management of copper mine tailing soils--sludge amendment and tree vegetation could improve biological soil quality.

    Science.gov (United States)

    Asensio, Verónica; Covelo, Emma F; Kandeler, Ellen

    2013-07-01

    Mine soils at the depleted copper mine in Touro (Northwest Spain) are physico-chemically degraded and polluted by chromium and copper. To increase the quality of these soils, some areas at this mine have been vegetated with eucalyptus or pines, amended with sludges, or received both treatments. Four sites were selected at the Touro mine tailing in order to evaluate the effect of these different reclamation treatments on the biological soil quality: (1) Control (untreated), (2) Forest (vegetated), (3) Sludge (amended with sludges) and (4) Forest+Sludge (vegetated and amended). The new approach of the present work is that we evaluated the effect of planting trees or/and amending with sludges on the biological soil quality of mine sites polluted by metals under field conditions. The addition of sludges to mine sites recovered the biological quality of the soil, while vegetating with trees did not increase microbial biomass and function to the level of unpolluted sites. Moreover, amending with sludges increased the efficiency of the soil's microbial community to metabolize C and N, which was indicated by the decrease of the specific enzyme activities and the increase in the ratio Cmic:Nmic (shift towards predominance of fungi instead of bacteria). However, the high Cu and Cr concentrations still have negative influence on the microorganisms in all the treated soils. For the future remediation of mine soils, we recommend periodically adding sludge and planting native legume species. Copyright © 2013 Elsevier B.V. All rights reserved.

  1. Capability challenges of facility management (FM) personnel toward sustainability agenda

    Science.gov (United States)

    Halim, Ahmad Ilyas Ahmad; Sarpin, Norliana; Kasim, Narimah Binti; Zainal, Rozlin Binti

    2017-10-01

    The industries business play a significant role to contribute toward economic growth in develop and developing country. However, they always face serious problems such as time overrun, waste generation, and cost overrun during their operation and maintenance. Traditional practice is found unable to control that situation. These challenges accent the need for practitioners to rethink and improve their process management. This show that industries business has major potential when applying sustainable development by focusing on three pillars (economic, environment, and social). By adopting sustainability, it can reduce energy consumption and waste, while increasing productivity, financial return and corporate standing in community. FM personnel are most suitable position to lead organizations toward sustainability implementation. However, lack of skill and capability among FM personnel to achieve sustainable goal had become barrier that need to overcome. This paper focus to identify capability challenges of FM personnel toward sustainability. A multiple researches were conducted and data were gathered through literature review from previous studies.

  2. Waste management facilities cost information: System cost model product description. Revision 2

    International Nuclear Information System (INIS)

    Lundeen, A.S.; Hsu, K.M.; Shropshire, D.E.

    1996-02-01

    In May of 1994, Lockheed Idaho Technologies Company (LITCO) in Idaho Falls, Idaho and subcontractors developed the System Cost Model (SCM) application. The SCM estimates life-cycle costs of the entire US Department of Energy (DOE) complex for designing; constructing; operating; and decommissioning treatment, storage, and disposal (TSD) facilities for mixed low-level, low-level, transuranic, and mixed transuranic waste. The SCM uses parametric cost functions to estimate life-cycle costs for various treatment, storage, and disposal modules which reflect planned and existing facilities at DOE installations. In addition, SCM can model new facilities based on capacity needs over the program life cycle. The SCM also provides transportation costs for DOE wastes. Transportation costs are provided for truck and rail and include transport of contact-handled, remote-handled, and alpha (transuranic) wastes. The user can provide input data (default data is included in the SCM) including the volume and nature of waste to be managed, the time period over which the waste is to be managed, and the configuration of the waste management complex (i.e., where each installation's generated waste will be treated, stored, and disposed). Then the SCM uses parametric cost equations to estimate the costs of pre-operations (designing), construction costs, operation management, and decommissioning these waste management facilities

  3. Conjunctive operation of river facilities for integrated water resources management in Korea

    Directory of Open Access Journals (Sweden)

    H. Kim

    2016-10-01

    Full Text Available With the increasing trend of water-related disasters such as floods and droughts resulting from climate change, the integrated management of water resources is gaining importance recently. Korea has worked towards preventing disasters caused by floods and droughts, managing water resources efficiently through the coordinated operation of river facilities such as dams, weirs, and agricultural reservoirs. This has been pursued to enable everyone to enjoy the benefits inherent to the utilization of water resources, by preserving functional rivers, improving their utility and reducing the degradation of water quality caused by floods and droughts. At the same time, coordinated activities are being conducted in multi-purpose dams, hydro-power dams, weirs, agricultural reservoirs and water use facilities (featuring a daily water intake of over 100 000 m3 day−1 with the purpose of monitoring the management of such facilities. This is being done to ensure the protection of public interest without acting as an obstacle to sound water management practices. During Flood Season, each facilities contain flood control capacity by limited operating level which determined by the Regulation Council in advance. Dam flood discharge decisions are approved through the flood forecasting and management of Flood Control Office due to minimize flood damage for both upstream and downstream. The operational plan is implemented through the council's predetermination while dry season for adequate quantity and distribution of water.

  4. Case management of severe malaria--a forgotten practice: experiences from health facilities in Uganda.

    Directory of Open Access Journals (Sweden)

    Jane Achan

    Full Text Available INTRODUCTION: Severe malaria is a life-threatening medical emergency and requires prompt and effective treatment to prevent death. There is paucity of published information on current practices of severe malaria case management in sub-Saharan Africa; we evaluated the management practices for severe malaria in Ugandan health facilities METHODS AND FINDINGS: We did a cross sectional survey, using multi-stage sampling methods, of health facilities in 11 districts in the eastern and mid-western parts of Uganda. The study instruments were adapted from the WHO hospital care assessment tools. Between June and August 2009, 105 health facilities were surveyed and 181 health workers and 868 patients/caretakers interviewed. None of the inpatient facilities had all seven components of a basic care package for the management of severe malaria consistently available during the 3 months prior to the survey. Referral practices were appropriate for <10% (18/196 of the patients. Prompt care at any health facility was reported by 29% (247/868 of patients. Severe malaria was correctly diagnosed in 27% of patients (233.Though the quinine dose and regimen was correct in the majority (611/868, 70.4% of patients, it was administered in the correct volumes of 5% dextrose in only 18% (147/815. Most patients (80.1% had several doses of quinine administered in one single 500 ml bottle of 5% dextrose. Medications were purchased by 385 (44% patients and medical supplies by 478 patients (70.6%. CONCLUSIONS: Management of severe malaria in Ugandan health facilities was sub-optimal. These findings highlight the challenges of correctly managing severe malaria in resource limited settings. Priority areas for improvement include triage and emergency care, referral practises, quality of diagnosis and treatment, availability of medicines and supplies, training and support supervision.

  5. Development of a standardized transfusion ratio as a metric for evaluating dialysis facility anemia management practices.

    Science.gov (United States)

    Liu, Jiannong; Li, Suying; Gilbertson, David T; Monda, Keri L; Bradbury, Brian D; Collins, Allan J

    2014-10-01

    Because transfusion avoidance has been the cornerstone of anemia treatment for patients with kidney disease, direct measurement of red blood cell transfusion use to assess dialysis facility anemia management performance is reasonable. We aimed to explore methods for estimating facility-level standardized transfusion ratios (STfRs) to assess provider anemia treatment practices. Retrospective cohort study. Point prevalent US hemodialysis patients on January 1, 2009, with Medicare as primary payer and dialysis duration of 90 days or longer were included (n = 223,901). All dialysis facilities with eligible patients were included (n = 5,345). Dialysis facility assignment. Receiving a red blood cell transfusion in the inpatient or outpatient setting. We evaluated 3 approaches for estimating STfR: ratio of observed to expected numbers of transfusions (STfR(obs)), a Bayesian approach (STfR(Bayes)), and a modified version of the Bayesian approach (STfR(modBayes)). The overall national transfusion rate in 2009 was 23.2 per 100 patient-years. Our model for predicting the expected number of transfusions performed well. For large facilities, all 3 STfRs worked well. However, for small facilities, while the STfR(modBayes) worked well, STfR(obs) values demonstrated instability and the STfR(Bayes) may produce more bias. Administration of transfusions to dialysis patients reflects medical practice both within and outside the dialysis unit. Some transfusions may be deemed unavoidable and transfusion practices are subject to considerable regional variation. Development of an STfR metric is feasible and reasonable for assessing anemia treatment at dialysis facilities. The STfR(obs) is simple to calculate and works well for larger dialysis facilities. The STfR(modBayes) is more analytically complex, but facilitates comparisons across all dialysis facilities, including small facilities. Copyright © 2014 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

  6. Nuclear facility decommissioning and site remedial actions

    Energy Technology Data Exchange (ETDEWEB)

    Knox, N.P.; Webb, J.R.; Ferguson, S.D.; Goins, L.F.; Owen, P.T.

    1990-09-01

    The 394 abstracted references on environmental restoration, nuclear facility decommissioning, uranium mill tailings management, and site remedial actions constitute the eleventh in a series of reports prepared annually for the US Department of Energy's Remedial Action Programs. Citations to foreign and domestic literature of all types -- technical reports, progress reports, journal articles, symposia proceedings, theses, books, patents, legislation, and research project descriptions -- have been included. The bibliography contains scientific, technical, economic, regulatory, and legal information pertinent to the US Department of Energy's Remedial Action Programs. Major sections are (1) Surplus Facilities Management Program, (2) Nuclear Facilities Decommissioning, (3) Formerly Utilized Sites Remedial Action Programs, (4) Facilities Contaminated with Naturally Occurring Radionuclides, (5) Uranium Mill Tailings Remedial Action Program, (6) Grand Junction Remedial Action Program, (7) Uranium Mill Tailings Management, (8) Technical Measurements Center, (9) Remedial Action Program, and (10) Environmental Restoration Program. Within these categories, references are arranged alphabetically by first author. Those references having no individual author are listed by corporate affiliation or by publication title. Indexes are provided for author, corporate affiliation, title word, publication description, geographic location, subject category, and keywords. This report is a product of the Remedial Action Program Information Center (RAPIC), which selects and analyzes information on remedial actions and relevant radioactive waste management technologies.

  7. Nuclear facility decommissioning and site remedial actions

    International Nuclear Information System (INIS)

    Knox, N.P.; Webb, J.R.; Ferguson, S.D.; Goins, L.F.; Owen, P.T.

    1990-09-01

    The 394 abstracted references on environmental restoration, nuclear facility decommissioning, uranium mill tailings management, and site remedial actions constitute the eleventh in a series of reports prepared annually for the US Department of Energy's Remedial Action Programs. Citations to foreign and domestic literature of all types -- technical reports, progress reports, journal articles, symposia proceedings, theses, books, patents, legislation, and research project descriptions -- have been included. The bibliography contains scientific, technical, economic, regulatory, and legal information pertinent to the US Department of Energy's Remedial Action Programs. Major sections are (1) Surplus Facilities Management Program, (2) Nuclear Facilities Decommissioning, (3) Formerly Utilized Sites Remedial Action Programs, (4) Facilities Contaminated with Naturally Occurring Radionuclides, (5) Uranium Mill Tailings Remedial Action Program, (6) Grand Junction Remedial Action Program, (7) Uranium Mill Tailings Management, (8) Technical Measurements Center, (9) Remedial Action Program, and (10) Environmental Restoration Program. Within these categories, references are arranged alphabetically by first author. Those references having no individual author are listed by corporate affiliation or by publication title. Indexes are provided for author, corporate affiliation, title word, publication description, geographic location, subject category, and keywords. This report is a product of the Remedial Action Program Information Center (RAPIC), which selects and analyzes information on remedial actions and relevant radioactive waste management technologies

  8. Engagement of Facilities Management in Design Stage through BIM: Framework and a Case Study

    Directory of Open Access Journals (Sweden)

    Ying Wang

    2013-01-01

    Full Text Available Considering facilities management (FM at the early design stage could potentially reduce the efforts for maintenance during the operational phase of facilities. Few efforts in construction industry have involved facility managers into the design phase. It was suggested that early adoption of facilities management will contribute to reducing the needs for major repairs and alternations that will otherwise occur at the operational phase. There should be an integrated data source providing information support for the building lifecycle. It is envisaged that Building Information Modelling (BIM would fill the gap by acting as a visual model and a database throughout the building lifecycle. This paper develops a framework of how FM can be considered in design stage through BIM. Based on the framework, the paper explores how BIM will beneficially support FM in the design phase, such as space planning and energy analysis. A case study of using BIM to design facility managers’ travelling path in the maintenance process is presented. The results show that early adoption of FM in design stage with BIM can significantly reduce life cycle costs.

  9. Project Management Plan for the Isotopes Facilities Deactivation Project at Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    1995-04-01

    The purpose of the Isotopes Facilities Deactivation Project (IFDP) is to place former isotopes production facilities at the Oak Ridge National Laboratory in a safe, stable, and environmentally sound condition suitable for an extended period of minimum surveillance and maintenance (S ampersand M) and as quickly and economically as possible. Implementation and completion of the deactivation project will further reduce the already small risks to the environment and to public safety and health. Furthermore, the project should result in significant S ampersand M cost savings in the future. The IFDP management plan has been prepared to document the project objectives, define organizational relationships and responsibilities, and outline the management control systems to be employed in the management of the project. The project has adopted a strategy to deactivate the simple facilities first, to reduce the scope of the project, and to gain experience before addressing more difficult facilities. A decision support system is being developed to identify those activities, that best promote the project mission and result in largest cost savings. The Work Plan for the Isotopes Facilities Deactivation Project at Oak Ridge National Laboratory (Energy Systems 1994) defines the project schedule, the cost estimate, and the technical approach for the project

  10. Using Tools of Strategic Management in Medical Facilities of Lublin Region

    Directory of Open Access Journals (Sweden)

    Jaworzynska Magdalena

    2017-06-01

    Full Text Available The purpose of this article is to evaluate the use of tools of strategic management in hospitals in Lublin region. The study was conducted among 14 medical entities from the area of Lublin Voivodeship. The survey was addressed to economic directors or chief accountants of health care facilities and sent by post. The questionnaire was also helpful in conducting an in-depth interview as it provided a required structure. As part of the interviews with managers of health care facilities, information beyond the questionnaire was acquired, e.g. about the mission. According to studies, most health care facilities develop strategic plans (71.4%. For 21.4% of the studied facilities, the strategic plan is known mainly to management. In contrast, 28.6% of entities do not have a strategic plan. The presented results of the research can increase the effectiveness of activities in each area of the health care facility, continuous process improvement and rapid response to changes in the environment.

  11. Optimization of the Operation of Green Buildings applying the Facility Management

    Directory of Open Access Journals (Sweden)

    Somorová Viera

    2014-06-01

    Full Text Available Nowadays, in the field of civil engineering there exists an upward trend towards environmental sustainability. It relates mainly to the achievement of energy efficiency and also to the emission reduction throughout the whole life cycle of the building, i.e. in the course of its implementation, use and liquidation. These requirements are fulfilled, to a large extent, by green buildings. The characteristic feature of green buildings are primarily highly-sophisticated technical and technological equipments which are installed therein. The sophisticated systems of technological equipments need also the sophisticated management. From this point of view the facility management has all prerequisites to meet this requirement. The paper is aimed to define the facility management as an effective method which enables the optimization of the management of supporting activities by creating conditions for the optimum operation of green buildings viewed from the aspect of the environmental conditions

  12. Heavy tails of OLS

    DEFF Research Database (Denmark)

    Mikosch, Thomas Valentin; de Vries, Casper

    2013-01-01

    Suppose the tails of the noise distribution in a regression exhibit power law behavior. Then the distribution of the OLS regression estimator inherits this tail behavior. This is relevant for regressions involving financial data. We derive explicit finite sample expressions for the tail probabili...

  13. ORNL Surplus Facilities Management Program maintenance and surveillance plan for fiscal year 1984

    International Nuclear Information System (INIS)

    Coobs, J.H.; Myrick, T.E.

    1986-10-01

    The Surplus Facilities Management Program (SFMP) at Oak Ridge National Laboratory (ORNL) is part of the Department of Energy's (DOE) National SFMP, administered by the Richland Operations Office. The purpose and objectives of the national program are set forth in the current SFMP Program Plan and include (1) the maintenance and surveillance of facilities awaiting decommissioning, (2) planning for the orderly decommissioning of these facilities, and (3) implementation of a program to accomplish the facility disposition in a safe, cost-effective, and timely manner. As outlined in the national program plan, participating SFMP contractors are required to prepare a formal plan that documents the maintenance and surveillance (M and S) programs established for each site. This report has been prepared to provide this documentation for those facilties included in the ORNL SFMP

  14. Conceptual Design of an In-Space Cryogenic Fluid Management Facility

    Science.gov (United States)

    Willen, G. S.; Riemer, D. H.; Hustvedt, D. C.

    1981-01-01

    The conceptual design of a Spacelab experiment to develop the technology associated with low gravity propellant management is presented. The proposed facility consisting of a supply tank, receiver tank, pressurization system, instrumentation, and supporting hardware, is described. The experimental objectives, the receiver tank to be modeled, and constraints imposed on the design by the space shuttle, Spacelab, and scaling requirements, are described. The conceptual design, including the general configurations, flow schematics, insulation systems, instrumentation requirements, and internal tank configurations for the supply tank and the receiver tank, is described. Thermal, structural, fluid, and safety and reliability aspects of the facility are analyzed. The facility development plan, including schedule and cost estimates for the facility, is presented. A program work breakdown structure and master program schedule for a seven year program are included.

  15. Design of a graphical user interface for a multimedia DBMS: query management facility

    OpenAIRE

    Peabody, Charles B.

    1991-01-01

    Approved for public release; distribution is unlimited This thesis presents criteria and necessary features by which to evaluate and design a good graphical user interface (GUI) for a Multimedia Database Management System (MDBMS). This material is also applicable to a traditional DBMS. Included in the thesis is the specifications for a Query Management Facility (QMF) for a MDMBS user interface. The nature and benefits of the GUI environment, requires that we consider GUI concepts early ...

  16. The mixed waste management facility. Monthly report, January 1995

    Energy Technology Data Exchange (ETDEWEB)

    Streit, R.

    1995-02-01

    During January, technical progress continued in general accordance with the MWMF FY95 Plan. Engineering development and design continued in support of preliminary design of MWMF major subsystems. Certain activities are being delayed due to DOE guidance for reduced funding profiles that would not warrant new hiring, early procurements, etc. Peer reviews and system preliminary design reviews are now being scheduled for project elements. We continued pursuing integration of MWMF and DWTF functions maximize cost savings. We also expended considerable engineering effort to provide technical and cost tradeoff information for the FY97 Validation. Management focus during January centered upon addressing the rebaseline for MWMF for FY97 Validation in March, and upon progressing with the RD&D permit. Funding baselines for preparing for FY97 Validation in March were obtained from DOE; based on the baseline, detailed scope, schedule, and budget guidance was issued to the project staff to develop Validation information. For reasons of cost-effectiveness, Validation cost estimates will be based on revised CDR estimates, since bottom-up estimates will be completed in July as part of Preliminary Design. We have directed Significant effort toward meeting the TPC and fiscal year profile costs while still maintaining the essential elements of the project. Final review and editorial changes were completed for the RD&D permit application. Based on the meeting with DTSC in December and revised operational requirements, we held a review of the overall permitting strategy prior to routing for signature approval. A simplified strategy is under review. The revised Environmental Assessment (EA) is ready for release to DOE, but is being held up pending results of the permitting strategy review.

  17. System Configuration Management Implementation Procedure for the Cold Vacuum Drying Facility Monitoring and Control System

    International Nuclear Information System (INIS)

    ANGLESEY, M.O.

    2000-01-01

    The purpose of this document is to establish the System Configuration Management Implementation Procedure (SCMIP) for the Cold Vacuum Drying Facility (CVDF) Monitoring and Control System (MCS). This procedure provides configuration management for the process control system. The process control system consists of equipment hardware and software that controls and monitors the instrumentation and equipment associated with the CVDF processes. Refer to SNF-3090, Cold Vacuum Drying Facility Monitoring and Control System Design Description, HNF-3553, Annex B, Safety Analysis Report for the Cold Vacuum Drying Facility, and AP-CM-6-037-00, SNF Project Process Automation Software and Equipment Configuration. This SCMIP identifies and defines the system configuration items in the control system, provides configuration control throughout the system life cycle, provides configuration status accounting, physical protection and control, and verifies the completeness and correctness of these items

  18. Progress and problems in the Formerly Utilized Sites Remedial Action Program and Surplus Facilities Management Program

    International Nuclear Information System (INIS)

    Fiore, J.J.; Turi, G.P.

    1988-01-01

    The Formerly Utilized Sites Remedial Action Program (FUSRAP) was established in 1974 to identify, evaluate, and as appropriate, conduct remedial actions at sites used in the early years of nuclear energy development by the Manhattan Engineer District and the Atomic Energy Commission (AEC). This program currently has 29 sites and is evaluating 350 other sites for possible inclusion in the program. Another remedial action program in the Department of Energy's (DOE) Division of Facility and Site Decommissioning Projects is the Surplus Facilities Management Program (SFMP). The SFMP involves the safe management, decontamination and disposal of surplus DOE contaminated facilities which were not related to defense activities. There are currently 33 projects at 15 different sites in the program. These two programs have made steady progress over the last 10 or so years in cleaning up sites so that they can be reused or released for unrestricted use. Work has been completed at 8 of the FUSRAP sites and three of the SFMP sites

  19. Evaluating malaria case management at public health facilities in two provinces in Angola.

    Science.gov (United States)

    Plucinski, Mateusz M; Ferreira, Manzambi; Ferreira, Carolina Miguel; Burns, Jordan; Gaparayi, Patrick; João, Lubaki; da Costa, Olinda; Gill, Parambir; Samutondo, Claudete; Quivinja, Joltim; Mbounga, Eliane; de León, Gabriel Ponce; Halsey, Eric S; Dimbu, Pedro Rafael; Fortes, Filomeno

    2017-05-03

    Malaria accounts for the largest portion of healthcare demand in Angola. A pillar of malaria control in Angola is the appropriate management of malaria illness, including testing of suspect cases with rapid diagnostic tests (RDTs) and treatment of confirmed cases with artemisinin-based combination therapy (ACT). Periodic systematic evaluations of malaria case management are recommended to measure health facility readiness and adherence to national case management guidelines. Cross-sectional health facility surveys were performed in low-transmission Huambo and high-transmission Uíge Provinces in early 2016. In each province, 45 health facilities were randomly selected from among all public health facilities stratified by level of care. Survey teams performed inventories of malaria commodities and conducted exit interviews and re-examinations, including RDT testing, of a random selection of all patients completing outpatient consultations. Key health facility readiness and case management indicators were calculated adjusting for the cluster sampling design and utilization. Availability of RDTs or microscopy on the day of the survey was 71% (54-83) in Huambo and 85% (67-94) in Uíge. At least one unit dose pack of one formulation of an ACT (usually artemether-lumefantrine) was available in 83% (66-92) of health facilities in Huambo and 79% (61-90) of health facilities in Uíge. Testing rates of suspect malaria cases in Huambo were 30% (23-38) versus 69% (53-81) in Uíge. Overall, 28% (13-49) of patients with uncomplicated malaria, as determined during the re-examination, were appropriately treated with an ACT with the correct dose in Huambo, compared to 60% (42-75) in Uíge. Incorrect case management of suspect malaria cases was associated with lack of healthcare worker training in Huambo and ACT stock-outs in Uíge. The results reveal important differences between provinces. Despite similar availability of testing and ACT, testing and treatment rates were lower in

  20. Management of aging in technical facilities of E.ON Kernkraft plants

    International Nuclear Information System (INIS)

    Reese, Sven H.; Brast, Gerhard; Schoeckle, Friedrich

    2009-01-01

    The publication explains, by means of specific measures, the management of aging in technical facilities as practiced in the plants of E.ON Kernkraft GmbH. First, the historical background is outlined and the reasons for introducing management of aging in order to limit and control factors influencing the lifetime of nuclear power plants are described. This is followed by a definition of management of aging in important safety-related facilities as against lifetime management of technical systems relevant to plant availability. This is the context in which the scope of the survey of continuous management of aging is defined in respect of physical aging. A classification is then made in accordance with the staggered requirements to be met in the quality of technical facilities. On the basis of the quality to be assured, the different component groups are assigned corresponding operational measures and explained. These continuous measures extend from failure-oriented maintenance to preventive maintenance to the integrity concept for technical installations. To document the findings and evaluate the effectiveness of the measures taken, the integration of the process is described and reference is made to continuous optimization according to PDCA principles. The explicit introduction of the process of management of aging creates a platform which allows a documentation to be accumulated of the manifold and comprehensive measures taken to control phenomena of aging in technical installations. (orig.)

  1. BIM Guidelines Inform Facilities Management Databases: A Case Study over Time

    Directory of Open Access Journals (Sweden)

    Karen Kensek

    2015-08-01

    Full Text Available A building information model (BIM contains data that can be accessed and exported for other uses during the lifetime of the building especially for facilities management (FM and operations. Working under the guidance of well-designed BIM guidelines to insure completeness and compatibility with FM software, architects and contractors can deliver an information rich data model that is valuable to the client. Large owners such as universities often provide these detailed guidelines and deliverable requirements to their building teams. Investigation of the University of Southern California (USC Facilities Management Service’s (FMS website showed a detailed plan including standards, file names, parameter lists, and other requirements of BIM data, which were specifically designated for facilities management use, as deliverables on new construction projects. Three critical details were also unearthed in the reading of these documents: Revit was the default BIM software; COBie was adapted to help meet facilities management goals; and EcoDomus provided a display of the collected data viewed through Navisworks. Published accounts about the Cinema Arts Complex developed with and under these guidelines reported positive results. Further examination with new projects underway reveal the rapidly changing relational database landscape evident in the new USC “Project Record Revit Requirement Execution Plan (PRxP”.

  2. Cost Implications of an Interim Storage Facility in the Waste Management System

    Energy Technology Data Exchange (ETDEWEB)

    Jarrell, Joshua J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Joseph, III, Robert Anthony [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Howard, Rob L [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Petersen, Gordon M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nutt, Mark [Argonne National Lab. (ANL), Argonne, IL (United States); Carter, Joe [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Cotton, Thomas [Complex Systems Group, Bozeman, MT (United States)

    2016-09-01

    This report provides an evaluation of the cost implications of incorporating a consolidated interim storage facility (ISF) into the waste management system (WMS). Specifically, the impacts of the timing of opening an ISF relative to opening a repository were analyzed to understand the potential effects on total system costs.

  3. Wireless Occupancy Sensors for Lighting Controls: An Applications Guide for Federal Facility Managers

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-03-15

    This guide provides federal facility managers with an overview of the energy savings potential of wireless lighting occupancy sensors for various room types, cost considerations, key steps to successful installation of wireless sensors, pros and cons of various technology options, light source considerations, and codes and standards.

  4. How Can Facilities Management Add Value To Organisations As Well As To Society?

    NARCIS (Netherlands)

    Jensen, P.A.; Sarasoja, A.L.; van der Voordt, D.J.M.; Coenen, C.

    2013-01-01

    The purpose of this paper is to present lessons learnt from a 3 year collaborative research project on the added value of Facilities Management (FM) involving institutions in five European countries. The starting point was the so-called FM Value Map developed earlier by the leader of the research

  5. Assessment of Behavior Management and Behavioral Interventions in State Child Welfare Facilities

    Science.gov (United States)

    Wong, Stephen E.

    2006-01-01

    Official state program reviews of 204 substitute care facilities were assessed for the types of behavior management and behavioral interventions used and the extent to which agency practices were consistent with learning theory principles. Data were also collected on the type and number of professional staff available to implement and oversee…

  6. Mixed Waste Management Facility (MWMF) closure, Savannah River Plant: Clay cap test section construction report

    Energy Technology Data Exchange (ETDEWEB)

    1988-02-26

    This report contains appendices 3 through 6 for the Clay Cap Test Section Construction Report for the Mixed Waste Management Facility (MWMF) closure at the Savannah River Plant. The Clay Cap Test Program was conducted to evaluate the source, lab. permeability, in-situ permeability, and compaction characteristics, representative of kaolin clays from the Aiken, South Carolina vicinity. (KJD)

  7. Operation, Maintenance and Management of Wastewater Treatment Facilities: A Bibliography of Technical Documents.

    Science.gov (United States)

    Himes, Dottie

    This is an annotated bibliography of wastewater treatment manuals. Fourteen manuals are abstracted including: (1) A Planned Maintenance Management System for Municipal Wastewater Treatment Plants; (2) Anaerobic Sludge Digestion, Operations Manual; (3) Emergency Planning for Municipal Wastewater Treatment Facilities; (4) Estimating Laboratory Needs…

  8. Innovation-system foresight in practice: A Nordic facilities management foresight

    DEFF Research Database (Denmark)

    Andersen, Per Dannemand; Andersen, Allan Dahl; Jensen, Per Anker

    2012-01-01

    foresight processes. The paper originates in a practical foresight project in the Nordic fa-cilities management (FM) industry. The goal of the foresight project was to identify possible futures of the FM sector in the Nordic countries (Denmark, Finland, Norway, and Sweden) and, based on the findings...

  9. Productive use of IT in support of FM (facilities management) solutions.

    Science.gov (United States)

    Wagstaff, T

    1997-01-01

    Drawing on the author's personal experience within the UK National Health Service, outlines at the macro level what information is needed, and why, in facilities management. Suggests that top-level data gathering is a priority, describes the processes required, and finally considers the advantages of sharing information with competitors and others.

  10. Analyzing the impact of intermodal facilities to the design and management of biofuels supply chain.

    Science.gov (United States)

    2010-01-01

    This paper analyzes the impact that an intermodal facility has on location and transportation : decisions for biofuel production plants. Location decisions impact the management of the in-bound and out-bound logistics of a plant. We model this supply...

  11. Identifying concepts for studying implementation of information technology in facilities management

    DEFF Research Database (Denmark)

    Ebbesen, Poul; Bonke, Sten

    2014-01-01

    Purpose: To contribute to identifying a conceptual framework for describing and understanding the processes involved when implementing and using Information Technology (IT) in Facilities Management (FM). This paper discusses how basic concepts from different theories can be applied in parallel when...

  12. 77 FR 74204 - Notice of Availability of the Record of Decision for the Final White-Tailed Deer Management Plan...

    Science.gov (United States)

    2012-12-13

    ... picked up in person at the Indiana Dunes Headquarters at the address above. The document may be found on... Indiana Dunes staff currently implements resource management actions to protect other resources, but no...

  13. 77 FR 24734 - Final White-tailed Deer Management Plan/Environmental Impact Statement for Indiana Dunes National...

    Science.gov (United States)

    2012-04-25

    ... may also be picked-up in person at the National Lakeshore's headquarters at the address listed above... biodiversity found within its boundaries. The National Lakeshore staff currently implements resource management...

  14. Adapting risk management and computational intelligence network optimization techniques to improve traffic throughput and tail risk analysis.

    Science.gov (United States)

    2014-04-01

    Risk management techniques are used to analyze fluctuations in uncontrollable variables and keep those fluctuations from impeding : the core function of a system or business. Examples of this are making sure that volatility in copper and aluminum pri...

  15. Talking tails : quantifying the development of tail biting in pigs

    NARCIS (Netherlands)

    Zonderland, J.J.

    2010-01-01

    Tail biting is an adverse behaviour characterised by manipulation of a pig’s tail by another pig resulting in tail damage and a possible tail biting outbreak. Tail biting is a common problem in the pig husbandry causing economic losses and reduced animal welfare worldwide. To prevent tail biting,

  16. Injurious tail biting in pigs: how can it be controlled in existing systems without tail docking?

    Science.gov (United States)

    D'Eath, R B; Arnott, G; Turner, S P; Jensen, T; Lahrmann, H P; Busch, M E; Niemi, J K; Lawrence, A B; Sandøe, P

    2014-09-01

    Tail biting is a serious animal welfare and economic problem in pig production. Tail docking, which reduces but does not eliminate tail biting, remains widespread. However, in the EU tail docking may not be used routinely, and some 'alternative' forms of pig production and certain countries do not allow tail docking at all. Against this background, using a novel approach focusing on research where tail injuries were quantified, we review the measures that can be used to control tail biting in pigs without tail docking. Using this strict criterion, there was good evidence that manipulable substrates and feeder space affect damaging tail biting. Only epidemiological evidence was available for effects of temperature and season, and the effect of stocking density was unclear. Studies suggest that group size has little effect, and the effects of nutrition, disease and breed require further investigation. The review identifies a number of knowledge gaps and promising avenues for future research into prevention and mitigation. We illustrate the diversity of hypotheses concerning how different proposed risk factors might increase tail biting through their effect on each other or on the proposed underlying processes of tail biting. A quantitative comparison of the efficacy of different methods of provision of manipulable materials, and a review of current practices in countries and assurance schemes where tail docking is banned, both suggest that daily provision of small quantities of destructible, manipulable natural materials can be of considerable benefit. Further comparative research is needed into materials, such as ropes, which are compatible with slatted floors. Also, materials which double as fuel for anaerobic digesters could be utilised. As well as optimising housing and management to reduce risk, it is important to detect and treat tail biting as soon as it occurs. Early warning signs before the first bloody tails appear, such as pigs holding their tails tucked

  17. Assessing Risks of Mine Tailing Dam Failures

    Science.gov (United States)

    Concha Larrauri, P.; Lall, U.

    2017-12-01

    The consequences of tailings dam failures can be catastrophic for communities and ecosystems in the vicinity of the dams. The failure of the Fundão tailings dam at the Samarco mine in 2015 killed 19 people with severe consequences for the environment. The financial and legal consequences of a tailings dam failure can also be significant for the mining companies. For the Fundão tailings dam, the company had to pay 6 billion dollars in fines and twenty-one executives were charged with qualified murder. There are tenths of thousands of active, inactive, and abandoned tailings dams in the world and there is a need to better understand the hazards posed by these structures to downstream populations and ecosystems. A challenge to assess the risks of tailings dams in a large scale is that many of them are not registered in publicly available databases and there is little information about their current physical state. Additionally, hazard classifications of tailings dams - common in many countries- tend to be subjective, include vague parameter definitions, and are not always updated over time. Here we present a simple methodology to assess and rank the exposure to tailings dams using ArcGIS that removes subjective interpretations. The method uses basic information such as current dam height, storage volume, topography, population, land use, and hydrological data. A hazard rating risk was developed to compare the potential extent of the damage across dams. This assessment provides a general overview of what in the vicinity of the tailings dams could be affected in case of a failure and a way to rank tailings dams that is directly linked to the exposure at any given time. One hundred tailings dams in Minas Gerais, Brazil were used for the test case. This ranking approach could inform the risk management strategy of the tailings dams within a company, and when disclosed, it could enable shareholders and the communities to make decisions on the risks they are taking.

  18. Forum Guide to Facilities Information Management: A Resource for State and Local Education Agencies. NFES 2012-808

    Science.gov (United States)

    National Forum on Education Statistics, 2012

    2012-01-01

    Safe and secure facilities that foster learning are crucial to providing quality education services, and developing and maintaining these facilities requires considerable resources and organization. Facility information systems allow education organizations to collect and manage data that can be used to inform and guide decisionmaking about the…

  19. Facilities management: Structuring a body of knowledge for continuing and tertiary education in South Africa

    Directory of Open Access Journals (Sweden)

    A. C. Hauptfleisch

    2010-01-01

    Full Text Available Globally the development of property and infrastructure, being part of the creation of  fixed investment and wealth, is taking place unabated. In support of this process is a multitude of highly skilled built environment professionals such as engineers, architects, quantity surveyors, construction managers, town and regional planners, land surveyors, etc. The absence of a universally acknowledged profession of the same standing, designated to manage and optimise the utilisation of the ever-compounding  fixed investments in the products of the collective built environment (buildings, engineering structures and infrastructure, is observed. In practice it manifests itself in the attempts, by the previously mentioned professionals and others, to cast themselves into the role of facilities managers. Of concern is the resultant diverse group of “facilities management” practitioners, sometimes without basic built environment education, often lacking any noteworthy specialised education or experience. For obvious reasons, the more developed a country, the more evident it becomes that a specific facilities management profession is taking root and is practised at various managerial levels. The term “facilities management” reportedly came into use in the United States of America during the 1970’s when a Facility Management Institute was founded in the USA and the first known formal symposium was held in Washington DC in 1989. Although perhaps lacking some of the prestige associated with other professions, there are reasons to believe that facilities management is in the process of becoming a driving force, not only in the scientific management and optimisation of fixed assets, but as a knowledge-based initiator of development in the built environment. The lack of a highly developed facilities management profession manifests itself in the alarming rate at which infrastructure and buildings are deteriorating in South Africa. This situation

  20. Availability above anything else: Schott glass refrigeration concept is connected to facility management; Verfuegbarkeit ist alles: Kaeltekonzept bei Schott Glas ist in Facility Management eingebunden

    Energy Technology Data Exchange (ETDEWEB)

    Bachmann, O.

    2003-10-01

    Schott Glas at Mainz is Europe's biggest producer of industrial glass, TV screens, etc. The refrigeration and facility management system is described. [German] Die KI-Redaktion stellt in regelmaessigen Abstaenden interessante Unternehmen und deren Loesungen bei Klima-, Kaelte- und Waermeversorgung vor. Wir berichten ueber Kuehlhausbetreiber, Chemieunternehmen und heute ueber so aussergewoehnliche Konzerne wie Schott Glas mit Hauptsitz in Mainz. Der nach eigenen Angaben groesste Spezialglashersteller Europas betreibt in Mainz seine groesste Fertigungsstaette fuer die Produktion von Fernsehbildschirmen und vielen weiteren technischen Glaesern, darunter auch die bekannten Ceran-Glaskeramik-Kochflaechen, von denen in den letzten 30 Jahren bereits ueber 50 Millionen Stueck gefertigt wurden. (orig.)

  1. Realizing Sustainability in Facilities Management: a pilot study at the Technical University of Denmark

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Møller, Jacob Steen; Jäschke, Stefan

    2012-01-01

    shared value. The paper presents a pilot case study on sustainability in facilities management and is intended for a mixed audience of practitioners and researchers. It draws upon the case study findings to establish a baseline of performance and presents practical management implications of integrating...... from both practice and research. The lessons learned at the Technical University of Denmark (DTU) are particularly relevant for universities and other public building owners, their Facilities Managers and consultants. Research limitations and implications: The paper is based on literature studies...... and value: The paper is based on action research to establish a collaborative framework in late 2011 and the findings of the pilot study, and have not been published before....

  2. An evaluation related to the effect of strategic facility management on choice of medical tourism destination

    Directory of Open Access Journals (Sweden)

    Tarcan Ertugrul

    2015-01-01

    Full Text Available This study based on literature review aims to evaluate and emphasize the affect of the strategic facility management (SFM on choice of medical tourism destination. Medical Tourism, which ranges from the health care services involving a cure to the wellness services involving no specific health trouble to pleasure and amusement services, is one of the most growing sectors in the world. Cost and quality of medical services are among the main reasons for the choice of destination. Strategic facility management has a positive correlation on the levels of quality, cost and customer satisfaction. Thus medical tourism and destination managers should take into account of the potential advantages of value creation offered through SFM in order to be chosen by customers (stakeholders.

  3. Environmental justice: Implications for siting of Federal Radioactive Waste Management Facilities

    International Nuclear Information System (INIS)

    Easterling, J.B.; Poles, J.S.

    1994-01-01

    Environmental justice is a term that has developed as a result of our need to address whether some of the environmental decisions we have made -- and others we will make -- are fair. The idea of environmental justice has been actively pursued by the Clinton Administration, and this consideration has resulted in Executive Order 12898, which was signed by President Clinton on February 11, 1994. The Executive Order calls for adverse impacts of Federal actions on minority or low-income populations to be identified before decisions implementing those actions are made. Numerous studies show that noxious facilities, such as incinerators and landfills, have been constructed in minority or low-income communities. And since the Department has not yet decided on sites for high-level waste storage or disposal facilities, it will have to take the new Executive Order into consideration as another piece in the complicated quilt of requirements that cover facility siting. An interesting twist to this is the fact that twenty Native American Indian Tribes expressed interest in voluntarily hosting a high-level radioactive waste management facility for temporary storage. They made these expressions on their own initiative, and several Tribes continue to pursue the idea of negotiations with either the Federal Government or private entities to locate a temporary storage site on Tribal land. The Executive Order goes beyond simply studying the effect of siting a facility and addresses in spirit a criticism that the Federal Government has been guilty of open-quotes environmental racismclose quotes in its siting policies -- that it has intentionally picked minority or low-income communities for waste management facilities. What Department of Energy staff and others may have considered foregone conclusions in terms of interim storage facility siting and transportation options will have to be reevaluated for compatibility with provisions of the new Executive Order

  4. Nuclear facility decommissioning and site remedial actions

    Energy Technology Data Exchange (ETDEWEB)

    Owen, P.T.; Knox, N.P.; Ferguson, S.D.; Fielden, J.M.; Schumann, P.L.

    1989-09-01

    The 576 abstracted references on nuclear facility decommissioning, uranium mill tailings management, and site remedial actions constitute the tenth in a series of reports prepared annually for the US Department of Energy's Remedial Action Programs. Citations to foreign and domestic literature of all types--technical reports, progress reports, journal articles, symposia proceedings, theses, books, patents, legislation, and research project descriptions--have been included. The bibliography contains scientific, technical, economic, regulatory, and legal information pertinent to the US Department of Energy's Remedial Action Programs. Major sections are (1) Surplus Facilities Management Program, (2) Nuclear Facilities Decommissioning, (3) Formerly Utilized Sites Remedial Action Program, (4) Facilities Contaminated with Naturally Occurring Radionuclides, (5) Uranium Mill Tailings Remedial Action Program, (6) Uranium Mill Tailings Management, (7) Technical Measurements Center, and (8) General Remedial Action Program Studies. Within these categories, references are arranged alphabetically by first author. Those references having no individual author are listed by corporate affiliation or by publication description. Indexes are provided for author, corporate affiliation, title work, publication description, geographic location, subject category, and keywords.

  5. Nuclear facility decommissioning and site remedial actions

    International Nuclear Information System (INIS)

    Owen, P.T.; Knox, N.P.; Ferguson, S.D.; Fielden, J.M.; Schumann, P.L.

    1989-09-01

    The 576 abstracted references on nuclear facility decommissioning, uranium mill tailings management, and site remedial actions constitute the tenth in a series of reports prepared annually for the US Department of Energy's Remedial Action Programs. Citations to foreign and domestic literature of all types--technical reports, progress reports, journal articles, symposia proceedings, theses, books, patents, legislation, and research project descriptions--have been included. The bibliography contains scientific, technical, economic, regulatory, and legal information pertinent to the US Department of Energy's Remedial Action Programs. Major sections are (1) Surplus Facilities Management Program, (2) Nuclear Facilities Decommissioning, (3) Formerly Utilized Sites Remedial Action Program, (4) Facilities Contaminated with Naturally Occurring Radionuclides, (5) Uranium Mill Tailings Remedial Action Program, (6) Uranium Mill Tailings Management, (7) Technical Measurements Center, and (8) General Remedial Action Program Studies. Within these categories, references are arranged alphabetically by first author. Those references having no individual author are listed by corporate affiliation or by publication description. Indexes are provided for author, corporate affiliation, title work, publication description, geographic location, subject category, and keywords

  6. 25 CFR 170.807 - What must BIA include when it develops an IRR Transportation Facilities Maintenance Management...

    Science.gov (United States)

    2010-04-01

    ... What must BIA include when it develops an IRR Transportation Facilities Maintenance Management System... 25 Indians 1 2010-04-01 2010-04-01 false What must BIA include when it develops an IRR Transportation Facilities Maintenance Management System? 170.807 Section 170.807 Indians BUREAU OF INDIAN AFFAIRS...

  7. Safe operation of existing radioactive waste management facilities at Dalat Nuclear Research Institute

    International Nuclear Information System (INIS)

    Pham Van Lam; Ong Van Ngoc; Nguyen Thi Nang

    2000-01-01

    The Dalat Nuclear Research Reactor was reconstructed from the former TRIGA MARK-II in 1982 and put into operation in March 1984. The combined technology for radioactive waste management was newly designed and put into operation in 1984. The system for radioactive waste management at the Dalat Nuclear Research Institute (DNRI) consists of radioactive liquid waste treatment station and disposal facilities. The treatment methods used for radioactive liquid waste are coagulation and precipitation, mechanical filtering and ion- exchange. Near-surface disposal of radioactive wastes is practiced at DNRI In the disposal facilities eight concrete pits are constructed for solidification and disposal of low level radioactive waste. Many types of waste generated in DNRI and in some Nuclear Medicine Departments in the South of Vietnam are stored in the disposal facilities. The solidification of sludge has been done by cementation. Hydraulic compactor has done volume reduction of compatible waste. This paper presents fifteen-years of safe operation of radioactive waste management facilities at DNRI. (author)

  8. [Security Management in Clinical Laboratory Departments and Facilities: Current Status and Issues].

    Science.gov (United States)

    Ishida, Haku; Nakamura, Junji; Yoshida, Hiroshi; Koike, Masaru; Inoue, Yuji

    2014-11-01

    We conducted a questionnaire survey regarding the current activities for protecting patients' privacy and the security of information systems (IS) related to the clinical laboratory departments of university hospitals, certified training facilities for clinical laboratories, and general hospitals in Yamaguchi Prefecture. The response rate was 47% from 215 medical institutions, including three commercial clinical laboratory centers. The results showed that there were some differences in management activities among facilities with respect to continuing education, the documentation or regulation of operational management for paper records, electronic information, remaining samples, genetic testing, and laboratory information for secondary use. They were suggested to be caused by differences in functions between university and general hospitals, differences in the scale of hospitals, or whether or not hospitals have received accreditation or ISO 15189. Regarding the IS, although the majority of facilities had sufficiently employed the access control to IS, there was some room for improvement in the management of special cases such as VIPs and patients with HIV infection. Furthermore, there were issues regarding the login method for computers shared by multiple staff, the showing of the names of personnel in charge of reports, and the risks associated with direct connections to systems and the Internet and the use of portable media such as USB memory sticks. These results indicated that further efforts are necessary for each facility to continue self-assessment and make improvements.

  9. Developing mobile BIM/2D barcode-based automated facility management system.

    Science.gov (United States)

    Lin, Yu-Cheng; Su, Yu-Chih; Chen, Yen-Pei

    2014-01-01

    Facility management (FM) has become an important topic in research on the operation and maintenance phase. Managing the work of FM effectively is extremely difficult owing to the variety of environments. One of the difficulties is the performance of two-dimensional (2D) graphics when depicting facilities. Building information modeling (BIM) uses precise geometry and relevant data to support the facilities depicted in three-dimensional (3D) object-oriented computer-aided design (CAD). This paper proposes a new and practical methodology with application to FM that uses an integrated 2D barcode and the BIM approach. Using 2D barcode and BIM technologies, this study proposes a mobile automated BIM-based facility management (BIMFM) system for FM staff in the operation and maintenance phase. The mobile automated BIMFM system is then applied in a selected case study of a commercial building project in Taiwan to verify the proposed methodology and demonstrate its effectiveness in FM practice. The combined results demonstrate that a BIMFM-like system can be an effective mobile automated FM tool. The advantage of the mobile automated BIMFM system lies not only in improving FM work efficiency for the FM staff but also in facilitating FM updates and transfers in the BIM environment.

  10. Developing Mobile BIM/2D Barcode-Based Automated Facility Management System

    Directory of Open Access Journals (Sweden)

    Yu-Cheng Lin

    2014-01-01

    Full Text Available Facility management (FM has become an important topic in research on the operation and maintenance phase. Managing the work of FM effectively is extremely difficult owing to the variety of environments. One of the difficulties is the performance of two-dimensional (2D graphics when depicting facilities. Building information modeling (BIM uses precise geometry and relevant data to support the facilities depicted in three-dimensional (3D object-oriented computer-aided design (CAD. This paper proposes a new and practical methodology with application to FM that uses an integrated 2D barcode and the BIM approach. Using 2D barcode and BIM technologies, this study proposes a mobile automated BIM-based facility management (BIMFM system for FM staff in the operation and maintenance phase. The mobile automated BIMFM system is then applied in a selected case study of a commercial building project in Taiwan to verify the proposed methodology and demonstrate its effectiveness in FM practice. The combined results demonstrate that a BIMFM-like system can be an effective mobile automated FM tool. The advantage of the mobile automated BIMFM system lies not only in improving FM work efficiency for the FM staff but also in facilitating FM updates and transfers in the BIM environment.

  11. Developing Mobile BIM/2D Barcode-Based Automated Facility Management System

    Science.gov (United States)

    Chen, Yen-Pei

    2014-01-01

    Facility management (FM) has become an important topic in research on the operation and maintenance phase. Managing the work of FM effectively is extremely difficult owing to the variety of environments. One of the difficulties is the performance of two-dimensional (2D) graphics when depicting facilities. Building information modeling (BIM) uses precise geometry and relevant data to support the facilities depicted in three-dimensional (3D) object-oriented computer-aided design (CAD). This paper proposes a new and practical methodology with application to FM that uses an integrated 2D barcode and the BIM approach. Using 2D barcode and BIM technologies, this study proposes a mobile automated BIM-based facility management (BIMFM) system for FM staff in the operation and maintenance phase. The mobile automated BIMFM system is then applied in a selected case study of a commercial building project in Taiwan to verify the proposed methodology and demonstrate its effectiveness in FM practice. The combined results demonstrate that a BIMFM-like system can be an effective mobile automated FM tool. The advantage of the mobile automated BIMFM system lies not only in improving FM work efficiency for the FM staff but also in facilitating FM updates and transfers in the BIM environment. PMID:25250373

  12. Waste Management facilities cost information: System Cost Model Software Quality Assurance Plan. Revision 2

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, B.L.; Lundeen, A.S.

    1996-02-01

    In May of 1994, Lockheed Idaho Technologies Company (LITCO) in Idaho Falls, Idaho and subcontractors developed the System Cost Model (SCM) application. The SCM estimates life-cycle costs of the entire US Department of Energy (DOE) complex for designing; constructing; operating; and decommissioning treatment, storage, and disposal (TSD) facilities for mixed low-level, low-level, transuranic, and mixed transuranic waste. The SCM uses parametric cost functions to estimate life-cycle costs for various treatment, storage, and disposal modules which reflect planned and existing facilities at DOE installations. In addition, SCM can model new facilities based on capacity needs over the program life cycle. The SCM also provides transportation costs for truck and rail, which include transport of contact-handled, remote-handled, and alpha (transuranic) wastes. The user can provide input data (default data is included in the SCM) including the volume and nature of waste to be managed, the time period over which the waste is to be managed, and the configuration of the waste management complex (i.e., where each installation`s generated waste will be treated, stored, and disposed). Then the SCM uses parametric cost equations to estimate the costs of pre-operations (designing), construction costs, operation management, and decommissioning these waste management facilities. For the product to be effective and useful the SCM users must have a high level of confidence in the data generated by the software model. The SCM Software Quality Assurance Plan is part of the overall SCM project management effort to ensure that the SCM is maintained as a quality product and can be relied on to produce viable planning data. This document defines tasks and deliverables to ensure continued product integrity, provide increased confidence in the accuracy of the data generated, and meet the LITCO`s quality standards during the software maintenance phase. 8 refs., 1 tab.

  13. Waste Management facilities cost information: System Cost Model Software Quality Assurance Plan. Revision 2

    International Nuclear Information System (INIS)

    Peterson, B.L.; Lundeen, A.S.

    1996-02-01

    In May of 1994, Lockheed Idaho Technologies Company (LITCO) in Idaho Falls, Idaho and subcontractors developed the System Cost Model (SCM) application. The SCM estimates life-cycle costs of the entire US Department of Energy (DOE) complex for designing; constructing; operating; and decommissioning treatment, storage, and disposal (TSD) facilities for mixed low-level, low-level, transuranic, and mixed transuranic waste. The SCM uses parametric cost functions to estimate life-cycle costs for various treatment, storage, and disposal modules which reflect planned and existing facilities at DOE installations. In addition, SCM can model new facilities based on capacity needs over the program life cycle. The SCM also provides transportation costs for truck and rail, which include transport of contact-handled, remote-handled, and alpha (transuranic) wastes. The user can provide input data (default data is included in the SCM) including the volume and nature of waste to be managed, the time period over which the waste is to be managed, and the configuration of the waste management complex (i.e., where each installation's generated waste will be treated, stored, and disposed). Then the SCM uses parametric cost equations to estimate the costs of pre-operations (designing), construction costs, operation management, and decommissioning these waste management facilities. For the product to be effective and useful the SCM users must have a high level of confidence in the data generated by the software model. The SCM Software Quality Assurance Plan is part of the overall SCM project management effort to ensure that the SCM is maintained as a quality product and can be relied on to produce viable planning data. This document defines tasks and deliverables to ensure continued product integrity, provide increased confidence in the accuracy of the data generated, and meet the LITCO's quality standards during the software maintenance phase. 8 refs., 1 tab

  14. Environmental Protection Agency (EPA) Facility Registry Service (FRS) Emergency Response (ER) Risk Management Plan (RMP) Facilities - Oil and Hazardous Materials

    Data.gov (United States)

    Department of Homeland Security — The purpose of this web feature service is to provide users with access to integrated facility information from FRS, limited to the subset of facilities that link to...

  15. Heads I’m Right, Tails It Was Chance: The Strange Case of Irrationality in Program Risk Management

    Science.gov (United States)

    2013-04-01

    This bias expresses itself at times as the reluctance to dismiss “ sunk costs ” of either projects or to abandon currently executing courses of...Often, though, we allow our internal biases and fallacious thinking to skew objective thinking of risks. Report Documentation Page Form...we can take steps to correct our biases and fallacious thinking that, left alone, can severely undermine effective risk management objectivity. As

  16. The partnership approach to siting and developing radioactive waste management facilities

    International Nuclear Information System (INIS)

    2010-03-01

    History shows that the search for sites for radioactive waste management facilities has been marred by conflicts and delays. Affected communities have often objected that their concerns and interests were not addressed. In response, institutions have progressively turned away from the traditional 'decide, announce and defend' model, and are learning to 'engage, interact and co-operate'. This shift has fostered the emergence of partnerships between the proponent of the facility and the potential host community. Working in partnership with potential host communities enables pertinent issues and concerns to be raised and addressed, and creates an opportunity for developing a relationship of mutual understanding and mutual learning, as well as for developing solutions that will add value to the host community and region. Key elements of the partnership approach are being incorporated into waste management strategies, leading increasingly to positive outcomes. National radioactive waste management programmes are in various phases of siting facilities and rely on different technical approaches for the various categories of waste. In all cases, it is necessary for institutional actors and the potential or actual host community to build a meaningful, workable relationship. Partnership approaches are effective in achieving a desirable combination of licensable site and management concept while meeting the sometimes competing requirements of fair representation and competent participation. Partnership arrangements facilitate reaching agreement on measures for local control, financial support and future development

  17. Public sector effects and social impact assessment of nuclear generating facilities: Information for community mitigation management

    International Nuclear Information System (INIS)

    Pijawka, K.D.

    1984-01-01

    One of the major issues in community impact management is the gap between revenues generated by energy projects and expenditures for public facilities and services because of project-induced growth. Of issue is the experience of communities experiencing rapid growth where project revenues are not generated until operations commence and yet, considerable investments are needed to accommodate growth during the construction phase. Such revenue imbalances have resulted in communities demanding ''up-front'' capital investments or revenue prior to and during construction. However, with the construction and operation of nuclear facilities, the few available studies have found substantial revenue gains allocated to local jurisdiction and little adverse expenditure effects. The analyses of twelve nuclear stations found that the demand for new and expanded public facilities and the social services attributable to the plants were generally small, that adverse impacts were controllable and mitigatable, and that utility revenue payments varied substantially amount the host areas

  18. Field and laboratory test methods for geomembranes during waste management facility construction

    International Nuclear Information System (INIS)

    Allen, S.R.; McCutchan, J.B.

    1991-01-01

    Hazardous waste management facilities are required to use approved lining and leak detection systems to prevent the migration of waste into the environment. Synthetic flexible membrane liners (FMLs) have effectively served as the critical barrier for waste containment and fluid migration. The U.S. EPA has established minimum technology requirements for the construction of lined facilities that include detailed and documented Construction Quality Assurance (CQA) plans. The U.S. EPA (EPA) recognizes that CQA during field construction is imperative for successful completion of project work and long-term facility operation. This paper discusses the importance of CQA during FML installation and the practical aspects of implementing a successful CQA program. Standard methods used for FML evaluation, in both the field and laboratory, are discussed and specific aspects of seam testing and data evaluation are addressed. The general importance of comprehensive definition of geomembrane seam field failures is strongly emphasized so that an appropriate response to test failures can be recommended

  19. Trends in decision making for the siting of waste management facilities

    International Nuclear Information System (INIS)

    Vari, A.

    2000-01-01

    Over the last two decades a number of research studies on waste management facility siting have been produced. A Facility Siting Credo exists (Kunreuther et al., 1993). It identifies a comprehensive set of criteria for successful siting, but relationships between them (complementary, conflicting) have not been investigated. An attempt has been made to identify a conceptual framework which helps to structure siting criteria based on Competing Values Approach (CVA) to organisational analysis (Quinn and Rohrbaugh, 1983). Competing values include goal-centred, data-based, participatory, and adaptable processes, as well as efficient, accountable, supportable, and legitimate decisions. Case studies: Analysing LLRW disposal facility siting processes in the US (California, Illinois, Nebraska, New York, and Texas), Canada, France, the Netherlands, Sweden, and Switzerland (1980-1993) by using the CVA framework (Vari et al., 1994). Analysis of LALW siting processes in Hungary (1985-99) (Juhasz et al., 1993; Ormai et al., 1998; Ormai, 1999). (author)

  20. Caught in the middle: The role of the Facilities Manager in organisational energy use

    International Nuclear Information System (INIS)

    Goulden, Murray; Spence, Alexa

    2015-01-01

    This study analyses the role of the Facilities Manager [FM] as a key actor in organisational energy management. This builds on the idea that ‘middle’ agents in networks can be an important lever for socio-technical change. The study demonstrates the considerable impact the FM can have on workplace energy consumption, whilst identifying a number of factors that constrain their agency and capacity to act. These include demands to meet workforce expectations of comfort; a lack of support from senior management; and a shortage of resources. Underlying these challenges, the study identifies three different energy rationales – that is to say conceptual frameworks – which are deployed by different groups of organisational actors. The challenges of reconciling these at-times-contradictory rationales results in a picture of energy management which to the outsider can appear highly irrational. The paper concludes with a consideration of how policy makers can apply these insights to support energy reduction in workplaces. -- Highlights: •Facilities Managers are increasingly critical node in organisational use of energy. •Potential for FMs to make significant reductions to organisational energy use. •Their ability to do so is constrained by the organisational environment. •Three ‘energy rationales’ which the shape organisational context are identified. •Opportunities exist for policy makers to improve organisational energy management