Energy evaluation process of electric domestic refrigerators; Proceso de evaluacion energetica de refrigeradores electrodomesticos

Energy Technology Data Exchange (ETDEWEB)

Malacara Toral, Manuel; Ruiz Neblina, Joaquin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1993-12-31

A description is made of an energy evaluation study on electric domestic refrigerators carried out by the Instituto de Investigaciones Electricas (IIE), in its strategy for diminishing the energy consumption through the design enhancement, the manufacture, the operation and the standardization of the electric appliances. In order to initiate the evaluation-standardization process, the Mexican (NOM), the American (ANSI/AHAM) and the Canadian (CAN/CSA) standards were taken as a base to harmonize the procedures and the parameters of the tests. The energy assessment demonstrated that there are significant differences among the standards encompassed by the study, therefore, recommendations were made for the harmonization of the standards. [Espanol] Se describe un estudio de evaluacion energetica sobre refrigeradores electrodomesticos realizado en el Instituto de Investigaciones Electricas (IIE) dentro de la estrategia para disminuir los consumos de energia a traves de mejoras en el diseno, la manufactura, la operacion y la normalizacion de equipos electricos. Se tomo como base las normas mexicanas (NOM), americana (ANSI/AHAM) y canadiense (CAN/CSA) para iniciar el proceso de evaluacion-normalizacion a fin de armonizar los procedimientos y parametros de las pruebas. La evaluacion energetica demostro que existen diferencias significativas entre las normas que abarco el estudio por lo que se presentan recomendaciones para la armonizacion de las normas.

Energy evaluation process of electric domestic refrigerators; Proceso de evaluacion energetica de refrigeradores electrodomesticos

Energy Technology Data Exchange (ETDEWEB)

Malacara Toral, Manuel; Ruiz Neblina, Joaquin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1992-12-31

A description is made of an energy evaluation study on electric domestic refrigerators carried out by the Instituto de Investigaciones Electricas (IIE), in its strategy for diminishing the energy consumption through the design enhancement, the manufacture, the operation and the standardization of the electric appliances. In order to initiate the evaluation-standardization process, the Mexican (NOM), the American (ANSI/AHAM) and the Canadian (CAN/CSA) standards were taken as a base to harmonize the procedures and the parameters of the tests. The energy assessment demonstrated that there are significant differences among the standards encompassed by the study, therefore, recommendations were made for the harmonization of the standards. [Espanol] Se describe un estudio de evaluacion energetica sobre refrigeradores electrodomesticos realizado en el Instituto de Investigaciones Electricas (IIE) dentro de la estrategia para disminuir los consumos de energia a traves de mejoras en el diseno, la manufactura, la operacion y la normalizacion de equipos electricos. Se tomo como base las normas mexicanas (NOM), americana (ANSI/AHAM) y canadiense (CAN/CSA) para iniciar el proceso de evaluacion-normalizacion a fin de armonizar los procedimientos y parametros de las pruebas. La evaluacion energetica demostro que existen diferencias significativas entre las normas que abarco el estudio por lo que se presentan recomendaciones para la armonizacion de las normas.

Rotor optimization of a Francis type hydraulic turbine through the computer flow analysis (CFD); Optimizacion del rodete de una turbina hidraulica tipo Francis a traves del analisis computacional del flujo (CFD)

Energy Technology Data Exchange (ETDEWEB)

Rosado Tamariz, Erick

2007-06-15

In the analysis of fluid behavior through hydraulic turbines, two basic methodologies for flow analysis and optimization processes in turbines are used, which are: a) modeled of flow through the entire turbine (joint), or modeled one of each component separately, obtaining satisfactory results by both methodologies. The analysis of computational fluids dynamics (CFD) to geometries improved by means of finite volume method (FVM) with their corresponding initials and boundary conditions is made, to solve a system differential equations of second order that correspond to the flow around the dominion of runner blades; considering nonviscous flow and the implementation of the two equations models for the solution of the equations that govern the turbulent flow. Also, used parameterization techniques based in a parametric geometry an objective function and the diminution of cavitation. This work presents the optimization of a runner from a Francis hydro turbine for a 75 MW considering three different load conditions (75%, 85% and 100%) through CFD as a part of the hydraulic analysis for modernization of the actual condition of a power generation unit. Francis runner optimization is made, through a previous analysis of CFD by means of the FVM, considering the viscous effects of the fluid and the model of turbulence developed by Sparlart and Allmaras; modeling the wicket and runner separately. Later the generation of a parametric model of the runner is made and the simulation for the generation of data base is formed. Finally an objective function is considered to develop the optimal geometry of the runner blades. The results are presented in a graphic form in such a way, that it shows the distributions of pressure and speed around the blades runner, the geometrical and performance (efficiency and power) comparison between original and optimized model. [Spanish] En el analisis del comportamiento del fluido a traves de turbinas hidraulicas, se emplean dos metodologias

Controlled environment laboratory for the energy certification of refrigeration and air conditioning systems; Laboratorio de ambiente controlado para la certificacion energetica de sistemas de refrigeracion y aire acondicionado

Energy Technology Data Exchange (ETDEWEB)

Ambriz, Juan Jose; Romero Paredes, Hernando; Dorantes, Ruben [Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

1999-07-01

In this paper the general characteristics of the Controlled Environment Laboratory (CELAB) are described and some of the possible tests that could be performed in this device to evaluate the energy efficiency in air conditioning systems, domestic refrigeration and industrial refrigeration, as well as tests to evaluate the hydrothermal comfort in national populations, are presented. [Spanish] En este trabajo se describen las caracteristicas generales del Laboratorio de Ambiente Controlado (LAB), y se presentan algunas de las posibles pruebas que podran ser desarrolladas en este dispositivo para evaluar la eficiencia energetica en sistemas de aire acondicionado, refrigeracion domestica y refrigeracion industrial, asi como para pruebas para evaluar el confort hidrotermico en poblaciones nacionales.

Structural characterization of advanced ceramics using the neutron diffractometer developed by Instituto de Pesquisas Energeticas e Nucleares (IPEN)

International Nuclear Information System (INIS)

Parente, C.B.R.; Mazzocchi, V.L.

1999-01-01

Application of neutron diffractometer at the Instituto de Pesquisas Energeticas Nucleares, Sao Paulo, Brazil, in the structural investigations of advanced ceramics was presented. Methodology of the analysis of neutron diffraction patterns was tested with BaLiF 3 single crystals and also doped with Ni 2+ or Pb 2+ ions. The same methodology was used to investigate the HTSC phases in the system Bi-Sr-Ca-Cu-O. The system Bi 1.7 Pb 0.3 Sr 2 Ca 2.2 Cu 3.5 O 10.6 was also investigated. Addition of Pb 2+ ions increased the fraction of high-T c phase 2223. Symmetry in neutron multiple diffraction patterns, obtained for aluminium single crystal, was elaborated. Crystal lattice parameter for aluminium single crystal was determined at different temperatures using neutron multiple diffraction. (author)

La Comunità Energetica del Sud Est Europa quale fattore di stabilità nell’area Balcanica

OpenAIRE

Massari, Saverio Francesco

2012-01-01

Il lavoro cerca di valutare il possibile ruolo della Comunità Energetica del Sud Est Europa quale fattore di stabilita’ nell’area Balcanica. Il Trattato fondativo della Comunita’ assegna a questa l’obiettivo di condurre una cooperazione in campo energetico al fine diffondere istituzioni e normative condivise, quali elementi di superamento del conflitto: tuttavia, sono molti gli ostacoli posti su questo cammino sia di natura interna alla regione che esterna, per l’influenza di fattori e poter...

Integral power evaluation in fossil fuel power plants; Evaluacion energetica integral en unidades de centrales termoelectricas

Energy Technology Data Exchange (ETDEWEB)

Figueroa I, Luis R; Sanchez H, Laura E; Rodriguez M, Jose H [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Nebradt G, Jesus [Unidad de Investigacion y Desarrollo de la Subdireccion de Generacion de la Comision Federal de Electricidad, (Mexico)

2006-07-01

In this occasion, a methodology is presented that carries out an integral energy evaluation of fossil fuel power plants units (FFPPU) with the purpose of determining the root of the significant decrements of power produced soon after the annual maintenance service. This proposal, besides identifying the origin of the energy efficiency problems, offers information about the contributions of each one of the involved equipment in the total decrement of the unit. With this methodology, the maintenance focuses in the equipment that contributes to the greater energy loss. This document presents such methodology along with its application in a real case, results and necessary remedial actions, demonstrating that its application offers bases for the investment in corrective measures. [Spanish] En esta ocasion se presenta una metodologia que efectua una evaluacion energetica integral de las unidades de centrales termoelectricas (UCT) con el fin de determinar la raiz de los decrementos de potencia significativos producidos luego del servicio anual de mantenimiento. Dicha propuesta, ademas de identificar el origen de los problemas de eficiencia energetica, brinda informacion acerca de las aportaciones de cada uno de los equipos involucrados al decremento total de la unidad. Con esta metodologia, el mantenimiento se enfoca a los equipos que contribuyen a la mayor perdida de potencia. Este documento exhibe tal metodologia junto con su aplicacion en un caso real, resultados y las acciones correctivas necesarias, demostrando que su aplicacion ofrece bases para una inversion futura en medidas correctivas.

Reliability optimization in compound electric power systems with the aid of evolutionary algorithms; Optimizacion de la confiabilidad en sistemas electricos de potencia compuestos utilizando algoritmos evolucionarios

Energy Technology Data Exchange (ETDEWEB)

Gomez Hernandez, Jose Alberto

2001-11-15

and branches, that contributes the most to the voltage collapse or singular point. The obtained results show the feasibility of the proposed algorithm for optimization of reliability considering conditions of security. The tested systems used are: Reliability test system of 24 nodes of the IEEE, Roy Billinton test system of 6 nodes and eastern area equivalent of the Mexican grid of 31 nodes of the Comision Federal de Electricidad. [Spanish] El proposito de evaluar la confiabilidad de Sistemas Electricos de Potencia (SEP) es para estimar la habilidad del sistema para desempenar su funcion de llevar la energia de las estaciones generadoras a los puntos de carga. Esto involucra la confiabilidad de fuentes de generacion y medios de transmision que afecta en la transferencia de potencia a traves del sistema de transmision que conlleva a perdida de carga y caidas de voltaje entre la generacion y los centros de consumo. En esta tesis se desarrolla una metodologia hibrida que optimiza la confiabilidad en sistemas compuestos (generacion-transmision) utilizando algoritmos evolucionarios. Esta tecnica de optimizacion determina el numero optimo de componentes (redundancia paralela en lineas de transmision) y asignacion de compensacion en derivacion en nodos de carga de la red necesarios para maximizar la confiabilidad sujeta a restricciones de costo, considerando condiciones de seguridad en estado estacionario usando la tecnica del minimo valor singular (MVS) como indicador a la inestabilidad de voltaje. La funcion objetivo se define como una funcion estocastica, donde la medida de interes es el MVS de la matriz Jacobiana de flujos de potencia del evento mas severo de acuerdo a la evaluacion de confiabilidad del sistema compuesto, esta formulacion es una combinacion de programacion no lineal entera y continua, donde los algoritmos convencionales de programacion matematica presentan dificultades en robustez y en la busqueda del optimo global. Los eventos de falla de las unidades

Energy Optimization in WWTP of Murcia Region; Optimizacion energetica en EDAR de la Region de Murcia

Energy Technology Data Exchange (ETDEWEB)

Simon Andreu, P.; Lardin Mifsut, C.; Abellan Solar, M.

2012-07-01

One of the main functions of Entidad de Saneamiento y Depuracion de la Region de Murcia (ESAMUR), is the management and maintenance of public wastewater treatment plants (WWTP) in order to obtain good quality water in accordance with wastewater reuse regulations, and at the same time, enhance each process related to wastewater treatment plants (WWTP) in order to obtain good quality water in accordance with wastewater reuse regulations, and at the same time, enhance each process related to wastewater treatment. The energy costs are almost 35% of the global costs in WWTP and a reduction in these costs has been a priority for ESAMUR during the last few years. We know that good design of WWTP is fundamental to obtain suitable energy ratios, and we are changing much of the operational criteria, evaluating the minimum amount of oxygen required by bacteria, studying the best ways of transferring oxygen from the gas to liquid phases in order in order to minimize aeration requirements, reducing the pressure losses, consuming the minimum energy for supplying an amount of air, testing control systems to manage air consumption, changing blowers for others more efficient, and improving the process of anaerobic fermentation of sludge, increasing the production of biogas by means of co-digestion processes and pre-treatments for improving the hydrolysis step. (Author)

Integral energy policy; Politica energetica integral

Energy Technology Data Exchange (ETDEWEB)

Bazan Navarrete, Gerardo [Programa Universitario de Energia, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

2006-11-15

The guidelines of energy policy are normative directions that govern the energy sector and its relations with different objects, these guidelines must be in agreement with the national objectives so that they collaborate to its accomplishment. Camara Nacional de la Industria y Trasnformacion (CANACINTRA) and the University Program of Energy made a diagnosis and long term prospective of the Energy Sector. With the design of five possible growth scenarios to year 2030 the total demand of energy required for the 2030 was calculated with the purpose of determining the mixture of the primary energy sources to satisfy the projected demand. With such data a decalogue of recommendations was formulated that appeal for better policies of organization and action, promotions and forecasts to obtain an optimal national performance, competitive at international level. [Spanish] Los lineamientos de politica energetica son orientaciones normativas que rigen el sector energetico y sus relaciones con distintos objetos, estos lineamientos deben estar a tono con los objetivos nacionales de modo que colaboren a su realizacion. Camara Nacional de la Industria de Transformacion (CANACINTRA) y el Programa Universitario de Energia realizaron un diagnostico y prospectiva a largo plazo del sector energia. Con el diseno de cinco posibles escenarios de crecimiento al 2030 se calculo la demanda total de energia requerida para el 2030 con el fin de determinar la mezcla de energeticos primarios para satisfacer la demanda proyectada. Con tales datos se conformo un decalogo de recomendaciones que apelan a mejores politicas de organizacion y accion, fomentos y previsiones para lograr un optimo desempeno energetico nacional, competitivo a nivel internacional.

Studies for the elaboration of standards of energy efficiency in constructions; Estudios para la elaboracion de normas de eficiencia energetica en edificaciones

Energy Technology Data Exchange (ETDEWEB)

Ramos Niembro, Gaudencio; Heard, Christopher [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico); Hernandez Pensado, Fernando [Comision Nacional para el Ahorro de Energia (Mexico)

1999-07-01

The obtaining of the first drafts of standard of energy efficiency implicate diverse research work previous to its elaboration, which include the justification and the analysis of the reason of the variables to consider, the corresponding cost-benefit study that gives viability to the standard and a procedure of calculation for its fulfillment. The present paper relates the diverse aspects that were analyzed for the justification, the revision and the obtaining of the first drafts of the first standards of energy efficiency in nonresidential constructions that are hoped to be implemented in Mexico. [Spanish] La obtencion de los anteproyectos de norma de eficiencia energetica implica diversos trabajos de investigacion previos a su elaboracion, los cuales incluyen la justificacion y el analisis del porque de las variables a considerar, el estudio costo- beneficio correspondiente, que da viabilidad a la norma y un procedimiento de calculo para su cumplimiento. El presente trabajo relata los diversos aspectos que se analizaron para la justificacion, la revision y la obtencion de los anteproyectos de las primeras normas de eficiencia energetica en edificaciones no residenciales que se esperan implantar en Mexico.

The energy situation in the Western region; Situacion energetica en el hemisferio occidental

Energy Technology Data Exchange (ETDEWEB)

Weintraub, Sidney [Center for Strategic and International Studies (CSIS) (United States)

2007-07-15

The Inter-American affairs have never been simple, in fact, they become even more complicated when the energy is the topic. Due to political and economic reasons as well as those provoked by the resources availability, the western countries seem to have the same differences among them. On the other hand, by means of an analysis of 11 nations, there can be found the challenges that American continent confronts with regard to the energy issue. [Spanish] Las relaciones interamericanas nunca han sido faciles. Menos aun cuando se trata de energia. Debido a razones tanto politicas y economicas como a las ocasionadas por la disponibilidad de recursos, los paises del hemisferio occidental parecen no poder reconciliar sus diferencias. Mediante el analisis de 11 naciones se aprecian los desafios que encara el continente americano en materia energetica.

Present conditions and perspectives of the standardization of the energy efficiency in Mexico; Actualidad y perspectivas del programa de normalizacion de la eficiencia energetica en Mexico

Energy Technology Data Exchange (ETDEWEB)

Chu Pulido, Henry Anli; Sanchez Ramos, Itha [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1999-12-31

The first energy efficiency standards of compulsory type were implemented in some states of the U.S. and in 1990 this country`s Federal government adopted them, since then, they have spread all over the world. This paper describes that under the frame of the National Program for Energy Modernization (1900-1994) and the National Development Program (1995-2000) of Mexico were considered as a priority the rational use of the energy, the conservation of the energy resources and the environmental protection. It is particularly mentioned, the standardization program of energy efficiency that has been developed that includes the limiting specification of the energy consumption or equipment efficiency, an essay method to determine the energy performance and the description of the label that will inform the users of the equipment energy performance [Espanol] Las primeras normas de eficiencia energetica de tipo obligatorio se implantaron en algunos estados de Estados Unidos y en 1990 las adopto el gobierno federal de ese pais, a partir de entonces se han difundido por todo el mundo. En el presente trabajo se describe que en el marco del Programa Nacional de Modernizacion Energetica (1900-1994) y del Plan Nacional de Desarrollo (1995-2000) de Mexico, se consideran como prioridad el uso racional de energia, la conservacion de recursos energeticos y la proteccion al medio ambiente. Se menciona particularmente, el programa de normalizacion de eficiencia energetica que se ha desarrollado incluye la especificacion del limite de consumo energetico o eficiencia del equipo, un metodo de ensayo para determinar el rendimiento energetico y la descripcion de la etiqueta que informara a los usuarios sobre el comportamiento energetico del equipo

Present conditions and perspectives of the standardization of the energy efficiency in Mexico; Actualidad y perspectivas del programa de normalizacion de la eficiencia energetica en Mexico

Energy Technology Data Exchange (ETDEWEB)

Chu Pulido, Henry Anli; Sanchez Ramos, Itha [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

The first energy efficiency standards of compulsory type were implemented in some states of the U.S. and in 1990 this country`s Federal government adopted them, since then, they have spread all over the world. This paper describes that under the frame of the National Program for Energy Modernization (1900-1994) and the National Development Program (1995-2000) of Mexico were considered as a priority the rational use of the energy, the conservation of the energy resources and the environmental protection. It is particularly mentioned, the standardization program of energy efficiency that has been developed that includes the limiting specification of the energy consumption or equipment efficiency, an essay method to determine the energy performance and the description of the label that will inform the users of the equipment energy performance [Espanol] Las primeras normas de eficiencia energetica de tipo obligatorio se implantaron en algunos estados de Estados Unidos y en 1990 las adopto el gobierno federal de ese pais, a partir de entonces se han difundido por todo el mundo. En el presente trabajo se describe que en el marco del Programa Nacional de Modernizacion Energetica (1900-1994) y del Plan Nacional de Desarrollo (1995-2000) de Mexico, se consideran como prioridad el uso racional de energia, la conservacion de recursos energeticos y la proteccion al medio ambiente. Se menciona particularmente, el programa de normalizacion de eficiencia energetica que se ha desarrollado incluye la especificacion del limite de consumo energetico o eficiencia del equipo, un metodo de ensayo para determinar el rendimiento energetico y la descripcion de la etiqueta que informara a los usuarios sobre el comportamiento energetico del equipo

Evaluation of saving measurements and energetic efficiency in air-conditioning systems; Evaluacion de medidas de ahorro y eficiencia energetica en sistemas de climatizacion

Energy Technology Data Exchange (ETDEWEB)

Perez Lombard, L [Asociacion de Investigacion y Cooperacion de Andalucia (Spain); Ortiz, J [Building Research Establishment (United Kingdom); Riviere, P [Armines-ecole des mines de Paris (France)

2006-04-15

Buildings require an adequate air conditioning to offer workers a labor environment where there is thermal comfort. A study was performed in three different European places which count on several climates. The conclusion was the following: in order to analyze the energy efficiency in edifications it is fundamental the simulation tools use with the purpose of calculating the consumption and evaluating the saving measurements. [Spanish] Los edificios requieren de una climatizacion adecuada para que los que ahi operan puedan hacerlo dentro de un ambiente laboral donde exista el confort termico. Se llevo a cabo un estudio en tres lugares de Europa poseedores de diferentes climas y se concluyo que para poder analizar la eficiencia energetica de climatizacion en las edificaciones es imprescindible el uso de herramientas de simulacion con el proposito de calcular el consumo y evaluar las medidas de ahorro.

Energy policy and foreign policy in Italy; Politica energetica e politica estera in Italia

Energy Technology Data Exchange (ETDEWEB)

Venanzi, F. (comp.)

2001-06-01

Energy policy in Italy is principally a matter of foreign policy. As a result, extensive programmes for the exploration, development, transport and marketing of oil and natural gas have to be planned and carried out together with the producing countries. In this effort, the country shall need the support of its national energy companies. That is why ENI's controlling interest as well as its mission had better be on Italian hands. [Italian] Per l'Italia la politica energetica deve essere principalmente politica estera. Occorre pertanto realizzare vasti programmi di esplorazione mineraria, coltivazione, trasporto e commercializzazione di petrolio e gas naturale con i Paesi produttori. Ci sara' quindi bisogno di contare sulle imprese energetiche nazionali: per questa ragione, si auspica che il controllo e la missione dell'ENI restino italiani.

Submersible pumps: Energetic efficiency norm; Bombas sumergibles: norma de eficiencia energetica

Energy Technology Data Exchange (ETDEWEB)

Acosta Torres, R. A.; Buendia Dominguez, E. H. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

The Instituto de Investigaciones Electricas (IIE), supporting the Comision Nacional para el Ahorro de Energia (CONAE), has prepared a preliminary project of the norm of energy efficiency for submersible pumps. This document has complied with the necessary formalities for the emission of the norm. This paper presents the results of the analysis of the submersible pumps, the energy savings, as well as the economic evaluation that sustains the norm project, additionally pointing out the environmental impact that will bring along the implantation of the same. [Espanol] El Instituto de Investigaciones Electricas (IIE), apoyando a la Comision Nacional para el Ahorro de Energia (CONAE), ha elaborado el anteproyecto de norma de eficiencia energetica para bombas sumergibles. Dicho documento ha cumplido con los tramites necesarios para la emision de una norma. En el presente articulo se mencionan los resultados del analisis de las bombas sumergibles, los ahorros energeticos, asi como la evaluacion economica que sustenta el proyecto de norma, indicandose ademas el impacto ambiental que tendra la implantacion de la misma.

Submersible pumps: Energetic efficiency norm; Bombas sumergibles: norma de eficiencia energetica

Energy Technology Data Exchange (ETDEWEB)

Acosta Torres, R A; Buendia Dominguez, E H [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

The Instituto de Investigaciones Electricas (IIE), supporting the Comision Nacional para el Ahorro de Energia (CONAE), has prepared a preliminary project of the norm of energy efficiency for submersible pumps. This document has complied with the necessary formalities for the emission of the norm. This paper presents the results of the analysis of the submersible pumps, the energy savings, as well as the economic evaluation that sustains the norm project, additionally pointing out the environmental impact that will bring along the implantation of the same. [Espanol] El Instituto de Investigaciones Electricas (IIE), apoyando a la Comision Nacional para el Ahorro de Energia (CONAE), ha elaborado el anteproyecto de norma de eficiencia energetica para bombas sumergibles. Dicho documento ha cumplido con los tramites necesarios para la emision de una norma. En el presente articulo se mencionan los resultados del analisis de las bombas sumergibles, los ahorros energeticos, asi como la evaluacion economica que sustenta el proyecto de norma, indicandose ademas el impacto ambiental que tendra la implantacion de la misma.

Sizing an isolated wind-solar-fuel cell generation system based on the particle swarm optimization method; Dimensionamiento de un sistema de generacion aislado eolico-solar-celda de combustible basado en el metodo de optimizacion de enjambre de particulas

Energy Technology Data Exchange (ETDEWEB)

Sanchez-Huerta, V; Ramirez-Arredondo, Juan M. [Universidad de Quintana Roo, Chetumal, Quintana Roo (Mexico)]. E-mail: vsanchez@gdl.cinvestav.mx; Arriaga-Hurtado, L. G. [CIDETEQ, Queretaro (Mexico)

2009-09-15

Sizing an electric energy system requires an analysis of investment, maintenance and operating costs. In the case of a generation system that uses renewable sources, optimal capacity becomes more complex compared to a conventional system, because of the randomness of renewable resources (wind, solar) and the still high costs of wind and photovoltage generator modules. This work presents the optimal sizing of a wind-solar-fuel cell generation system, minimizing the costs of the system while satisfying the energy demands of an isolated charge. The optimization method used is based on an evolutionary programming technique known as particle swarms (PSO-particle swarm optimization). The generation of energy with a hybrid system is discussed, based on the profile of insolation and wind availability at the site, with the objective of satisfying a specific electric demand. [Spanish] El dimensionamiento de un sistema de generacion de energia electrica requiere un analisis de los costos de inversion, mantenimiento y operacion. En el caso de un sistema de generacion que utiliza fuentes renovables la capacidad optima resulta mas compleja con respecto a un sistema convencional, debido a la aleatoriedad de los recursos renovables (eolico, solar), y a los aun altos costos de generadores eolicos y modulos fotovoltaicos. En este trabajo se presenta el dimensionamiento optimo de un sistema de generacion eolico-solar-celda de combustible minimizando los costos del sistema que satisfaga la energia demandada por una carga aislada. El metodo de optimizacion utilizado esta basado en una tecnica de programacion evolutiva conocida como enjambre de particulas (PSO por sus siglas en ingles: particle swarm optimization). Se plantea la generacion de energia del sistema hibrido con base a la insolacion y el perfil del viento disponible en sitio, con objeto de satisfacer una demanda electrica determinada.

Energy efficiency indicators. Case study, Liguria; Indicatori di efficienza energetica. Il caso Liguria

Energy Technology Data Exchange (ETDEWEB)

Ciarallo, M.A. [ENEA, Divisione Promozione degli Usi Efficienti e Diversificazione dell' Energia, Centro Ricerche Casaccia, S. Maria Galeria, RM (Italy)

2001-07-01

The report examines the trend in the Liguria Region's energy requirements over the period 1988-1996. The trend was analysed using the regional energy balances and energy efficiency indicators, both in aggregate form and on a single sector basis. The residential sector, in particular, was singled out for an in-depth analysis using publishing and processed data. [Italian] Il presente rapporto esamina l'evoluzione delle caratteristiche energetiche della Regione Liguria attraverso l'analisi degli indicatori di efficienza energetica. Tale analisi e' stata svolta sia a livello aggregato che con riferimento ai singoli settori di attivita'. Particolare attenzione e' stata dedicata al settore residenziale, per il quale e' stato svolto un esame piu' approfondito attraverso un lavoro di raccolta e di elaborazione dati. Il periodo di riferimento va dal 1988 al 1966 dal momento che questo e' l'ultimo anno per il quale sono disponibili i dati economici Istat utilizzati per il calcolo degli indicatori.

Energy efficiency indicators. Case study, Liguria; Indicatori di efficienza energetica. Il caso Liguria

Energy Technology Data Exchange (ETDEWEB)

Ciarallo, M A [ENEA, Divisione Promozione degli Usi Efficienti e Diversificazione dell' Energia, Centro Ricerche Casaccia, S. Maria Galeria, RM (Italy)

2001-07-01

The report examines the trend in the Liguria Region's energy requirements over the period 1988-1996. The trend was analysed using the regional energy balances and energy efficiency indicators, both in aggregate form and on a single sector basis. The residential sector, in particular, was singled out for an in-depth analysis using publishing and processed data. [Italian] Il presente rapporto esamina l'evoluzione delle caratteristiche energetiche della Regione Liguria attraverso l'analisi degli indicatori di efficienza energetica. Tale analisi e' stata svolta sia a livello aggregato che con riferimento ai singoli settori di attivita'. Particolare attenzione e' stata dedicata al settore residenziale, per il quale e' stato svolto un esame piu' approfondito attraverso un lavoro di raccolta e di elaborazione dati. Il periodo di riferimento va dal 1988 al 1966 dal momento che questo e' l'ultimo anno per il quale sono disponibili i dati economici Istat utilizzati per il calcolo degli indicatori.

Optimization of a water resource system expansion using the Genetic Algorithm and Simulated Annealing methods; Optimizacion de la expansion de un sistema de recursos hidricos utilizados las metodologias del algoritmo genetico y el recocido simulado

Energy Technology Data Exchange (ETDEWEB)

Sanchez Camacho, Enrique; Andreu Alvarez, Joaquin [Universidad Politecnica de Valencia (Spain)

2001-06-01

Two numerical procedures, based on the Genetic Algorithm (GA) and the Simulated Annealing (SA), are developed to solve the problem of the expansion of capacity of a water resource system. The problem was divided into two subproblems: capital availability and operation policy. Both are optimisation-simulation models, the first one is solved by means of the GA and SA, in each case, while the second one is solved using the Out-of-kilter algorithm (OKA), in both models. The objective function considers the usual benefits and costs in this kind of systems, such as irrigation and hydropower benefits, costs of dam construction and system maintenance. The strength and weakness of both models are evaluated by comparing their results with those obtained with the branch and bound technique, which was classically used to solve this kind of problems. [Spanish] Un par de metodos numericos fundamentados en dos tecnicas de busqueda globales. Algoritmos Genetico (AG) y Recocido Simulado (RS), son desarrollados para resolver el problema de expansion de capacidad de un sistema de recursos hidricos. La estrategia ha sido dividir al problema en dos subproblemas: el de disponibilidad de capital y el de la politica de operacion. Ambos modelos son de optimizacion-simulacion, el primero se realiza mediante los algoritmos del RS y el AG en cada caso, en tanto que el segundo lleva a cabo a traves del algoritmo del Out-of-kilter (AOK) en los dos modelos. La funcion objetivo con que se trabaja considera los beneficios y costos mas comunes en este tipo de sistema, tales como beneficios por riego, por hidroelectricidad y costos de construccion de los embalses y mantenimiento del sistema. La potencia y debilidades delos dos modelos se evaluan mediante la comparacion con los resultados obtenidos a traves de una de las tecnicas mas usadas en este tipo de problemas: la de ramificacion y acotacion.

Promoting energy efficiency: supporting Public Administration and Local Bodies; Promuovere l'efficienza energetica : il supporto alla Pubblica Amministrazione e agli Enti Locali

Energy Technology Data Exchange (ETDEWEB)

Fasano, G; Manila, E [Dipartimento tecnologie per l' energia, le fonti rinnovabili e il risparmio energetico, ENEA (Italy)

2008-11-15

ENEAS's institutional tasks include technical and scientific support to Public Administration and Local Bodies in the field of energy. Recently such a role has been strengthened by setting up the Agency for Energy Efficiency which ENEA is responsible for. [Italian] Tra i compiti istituzionali dell'ENEA vi e quello di fornire un supporto tecnico scientifico alla PA e agli Enti Locali in tema di energia. Tale ruolo e stato di recente rafforzato con l'istituzione dell'Agenzia per l'Efficienza Energetica affidata all'Ente.

The energy efficiency standards in Mexico; Las normas de eficiencia energetica en Mexico

Energy Technology Data Exchange (ETDEWEB)

Pulido, Ybo [Comision Nacional para el Ahorro de Energia, Mexico, D.F. (Mexico)

2001-07-01

The Ley Federal sobre Metrologia y Normalizacion (Federal Law on Metrology and Standardization) that is in force since July 16, 1992, establishes that it corresponds to the agencies of the federal public administration, in its scope of competition, to constitute the National Consultative Committees of Standardization (CCNN) to issue Mexican Official Standards (NOM) on products, systems, processes, methods, facilities, services or activities, as well as to certify, verify and inspect its fulfillment. The NOM are of compulsory application because they have as finality the establishing of the characteristics and/or specifications, criteria and procedures that allow to protect and to promote the improvement of the environment and of the ecosystems, as well as the preservation of the natural resources. The Secretariat of Energy issues the NOM on energy efficiency, which are formulated by the National Consultative Committee of Standardization for the Preservation and Rational Use of Energy Resources (CCNNPURRE), which is presided over by the General Director of CONAE. The standardization of Energy Efficiency in Mexico has allowed savings, in the consumption of electrical and thermal energy, estimated for 2001 of 7,700 GWh and an avoided electrical power of 1 270 MW, which locates it as an important measure in the achievement of the objectives of the CONAE-CCNNPURRE, to conceive and to promote strategies and guidelines of action relative to the saving and efficient and rational use of the energy and as a consequence the preservation of the nonrenewable natural resources. [Spanish] La Ley Federal sobre Metrologia y Normalizacion que esta en vigor desde el 16 de julio de 1992, establece que corresponde a las dependencias de la administracion publica federal, en su ambito de competencia, constituir los Comites Consultivos Nacionales de Normalizacion (CCNN) para expedir Normas Oficiales Mexicanas (NOM) sobre productos, sistemas, procesos, metodos, instalaciones, servicios o

Hydrocarbon reserves, energy assurance and macroeconomics: a complex balance; Reservas de hidrocarburos, seguridad energetica y macroeconomia: un balance complejo

Energy Technology Data Exchange (ETDEWEB)

Alarco Tosoni, German [TYH Economia, S.A. de C.V., Mexico, D.F.(Mexico)

2006-11-15

The available public information relative to the limited discovered and undiscovered crude and natural gas reserves in Mexico, from an international comparison perspective, is analyzed. Through the evaluation of the national energy programs, a limited conception of energy security is made clear concerning that posed by the other countries within North America. Various scenarios are stated regarding proved/production reserves to 2020 which will induce, together with the notion of energy security, a reduction in the current production levels - crude oil exports. The paradox referring to the fact that given certain reduction levels in the exports' crude platform, both the product level as well as real public expenditure will rise, is discovered. Finally, the macroeconomic effects of the proposal and of the necessary complementary policies needed to be designed and implemented in order to improve our macroeconomic performance are also evaluated. [Spanish] Se analiza la informacion publica disponible sobre las reservas limitadas de crudo y gas natural descubiertas y no descubiertas de Mexico en una perspectiva internacional comparada. Al evaluar los programas energeticos nacionales se transparenta una concepcion limitada de la seguridad energetica, respecto de lo planteado por los otros paises de America del Norte. Se plantean diferentes escenarios de reservas probadas/produccion al 2020 que inducirian, conjuntamente con la incorporacion de la nocion de seguridad energetica, a reducir los niveles actuales de produccion - exportacion de crudo. Se descubre la paradoja de que para determinados niveles de reduccion de la plataforma de exportacion de crudo tanto el nivel de producto como de gasto publico real aumentan. Por ultimo, se evaluan tanto los efectos macroeconomicos de la propuesta como de algunas politicas complementarias que seria necesario disenar e implantar para mejorar nuestro desempeno macroeconomico.

The application of the expert system Seilum for the energy assessment in the Universidad Nacional Autonoma de Mexico (UNAM) illumination, phase 1: Acatlan; Aplicacion del sistema experto Seilum para la evaluacion energetica de la iluminacion en la UNAM, fase 1: Acatlan

Energy Technology Data Exchange (ETDEWEB)

Kemper Valverde, Nicolas; Lara Rosano, Felipe; Sanchez Cifuentes, Augusto [Universidad Nacional Autonoma de Mexico, Mexico, D. F. (Mexico)

1993-12-31

This paper analyses the characteristics of the expert system Seilum and its first validation after being employed to compare the energy audit of the illumination installations carried out at the Universidad Nacional Autonoma de Mexico (UNAM)`s Acatlan Unit. In accordance with these results, the perspectives of its generalized application in the balance of the units is proposed, as well as in the small and medium size Mexican industry. [Espanol] En este trabajo se discuten las caracteristicas del sistema experto Seilum y su primera validacion luego de haber sido empleado para comparar la auditoria energetica de las instalaciones de iluminacion llevada a cabo en la unidad de acatlan de la Universidad Nacional Autonoma de Mexico (UNAM). De acuerdo a estos resultados se plantean las perspectivas de su empleo generalizado en las demas unidades, asi como en la pequena y mediana industria mexicana.

The application of the expert system Seilum for the energy assessment in the Universidad Nacional Autonoma de Mexico (UNAM) illumination, phase 1: Acatlan; Aplicacion del sistema experto Seilum para la evaluacion energetica de la iluminacion en la UNAM, fase 1: Acatlan

Energy Technology Data Exchange (ETDEWEB)

Kemper Valverde, Nicolas; Lara Rosano, Felipe; Sanchez Cifuentes, Augusto [Universidad Nacional Autonoma de Mexico, Mexico, D. F. (Mexico)

1992-12-31

This paper analyses the characteristics of the expert system Seilum and its first validation after being employed to compare the energy audit of the illumination installations carried out at the Universidad Nacional Autonoma de Mexico (UNAM)`s Acatlan Unit. In accordance with these results, the perspectives of its generalized application in the balance of the units is proposed, as well as in the small and medium size Mexican industry. [Espanol] En este trabajo se discuten las caracteristicas del sistema experto Seilum y su primera validacion luego de haber sido empleado para comparar la auditoria energetica de las instalaciones de iluminacion llevada a cabo en la unidad de acatlan de la Universidad Nacional Autonoma de Mexico (UNAM). De acuerdo a estos resultados se plantean las perspectivas de su empleo generalizado en las demas unidades, asi como en la pequena y mediana industria mexicana.

Regulation on power efficiency in the automobile; Regulacion sobre eficiencia energetica en el automovil

Energy Technology Data Exchange (ETDEWEB)

Maldonado Susano, Armando; Romero de Vivar Uvaldo, Pascual [Comision Nacional para el Ahorro de Energia, Mexico, D.F. (Mexico)

2001-07-01

In this article it is presented a brief analysis of one of the regulations on the yield of fuel consumption of the light vehicles that promoted substantial changes in the Mexican automotive industry, the decree denominated PREMCE (Average of minimum fuel yield by company), as well as some international experiences relative to the subject. It is also indicated the evolution, in the last years, of the average yields of fuel consumption (Km/L) in Mexico in the new automobiles and the more important technological factors that affect their energy efficiency. [Spanish] En este articulo se presenta un breve analisis de una de las regulaciones sobre el rendimiento de consumo de combustible de los vehiculos ligeros que promovio cambios sustanciales en la industria automotriz mexicana, el decreto denominado Premce (Promedio de rendimiento minimo de combustible por empresa), asi como algunas experiencias internacionales relativas al tema. Se senala tambien la evolucion, en los ultimos anos, de los rendimientos promedio de consumo de combustible (Km/L) en Mexico en los automoviles nuevos y los factores tecnologicos mas importantes que influyen en su eficiencia energetica.

Implications of energy reform on Mexican legislation for new and conventional energy technologies; Implicaciones de la reforma energetica sobre la legislacion mexicana con respecto a tecnologias energeticas nuevas y convencionales

Energy Technology Data Exchange (ETDEWEB)

Bautista Rodriguez, C. Moises; Tapia Pachuca, A. Belen [Alter Energias Grupo, Puebla (Mexico). E-mail: celso.bautista@thyssenkrupp.com; Gaytan Cruz, Veronica; Rivera Marquez, J. A.; Marin Torres, J. Lucina (Benemerita Universidad Autonoma de Puebla, Puebla (Mexico)

2009-09-15

de pilas domesticas desechadas. La legislacion sobre el tema se reduce a un proyecto de Norma Mexicana No Obligatoria, propuesta desde el 2006 sin aplicacion hasta el momento de la redaccion del presente documento. Ademas de implicar un impacto ambiental nocivo por la falta de regulacion, tambien representa un derroche energetico de impacto sobre la economia de los usuarios, al desecharse las pilas con una carga energetica residual aun importante (>60 %). En este trabajo se realiza un analisis sobre la reciente Reforma Energetica Mexicana sobre la regulacion en el uso de tecnologias alternativas. En comparacion con la legislacion internacional, la mexicana observa bases poco claras e incompletas, la falta de instituciones cientificas de orden gubernamental como asesores tecnologicos y la falta de una legislacion clara, completa, apegada a los principios internacionales a favor del medio ambiente y la sociedad. Estas caracteristicas ponen en riesgo desde su origen la normatividad y su aplicacion en la sociedad mexicana, implicando tambien la perdida de los beneficios en la aplicacion de tecnologias limpias y de mayores rendimientos, sin dejar de representar un retrazo tecnologico, economico, ambiental y social.

Automatic system for ionization chamber current measurements

International Nuclear Information System (INIS)

Brancaccio, Franco; Dias, Mauro S.; Koskinas, Marina F.

2004-01-01

The present work describes an automatic system developed for current integration measurements at the Laboratorio de Metrologia Nuclear of Instituto de Pesquisas Energeticas e Nucleares. This system includes software (graphic user interface and control) and a module connected to a microcomputer, by means of a commercial data acquisition card. Measurements were performed in order to check the performance and for validating the proposed design

Energy efficiency standardizing in vertical pumps; Normalizacion de eficiencia energetica en bombas verticales

Energy Technology Data Exchange (ETDEWEB)

Acosta Torres, Rosa Aracely; Buendia Dominguez, Eduardo H. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

The Instituto de Investigaciones Electricas (IIE) supporting the Comision Nacional para el Ahorro de Energia (CONAE) (National Commission for Energy Saving) developed the project of a standard on energy efficiency of vertical pumps, turbine type with external motor. This documents has fulfilled the necessary formalities for the issuing of a norm, being published the Mexican Official Norm (NOM-001-ENER-1995) on December 22, 1995. This article relates the results of the study for the elaboration of this norm, considering the energy saving, as well as the economic evaluation that supports the project of the norm, indicating also the environmental impact that its implantation will have. [Espanol] El Instituto de Investigaciones Electricas (IIE) apoyando a la Comision Nacional para el Ahorro de Energia (CONAE) elaboro el anteproyecto de norma de eficiencia energetica en bombas verticales tipo turbina con motor externo. Dicho documento ha cumplido con los tramites necesarios para la emision de una norma, habiendose publicado como Norma Oficial Mexicana (NOM-001-ENER-1995) el 22 de diciembre de 1995. En el presente articulo se mencionan los resultados del estudio para la realizacion de esta norma, considerando los ahorros energeticos, asi como la evaluacion economica que sustenta el proyecto de norma, indicando tambien el impacto ambiental que tendra su implantacion.

Energy efficiency standardizing in vertical pumps; Normalizacion de eficiencia energetica en bombas verticales

Energy Technology Data Exchange (ETDEWEB)

Acosta Torres, Rosa Aracely; Buendia Dominguez, Eduardo H [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

The Instituto de Investigaciones Electricas (IIE) supporting the Comision Nacional para el Ahorro de Energia (CONAE) (National Commission for Energy Saving) developed the project of a standard on energy efficiency of vertical pumps, turbine type with external motor. This documents has fulfilled the necessary formalities for the issuing of a norm, being published the Mexican Official Norm (NOM-001-ENER-1995) on December 22, 1995. This article relates the results of the study for the elaboration of this norm, considering the energy saving, as well as the economic evaluation that supports the project of the norm, indicating also the environmental impact that its implantation will have. [Espanol] El Instituto de Investigaciones Electricas (IIE) apoyando a la Comision Nacional para el Ahorro de Energia (CONAE) elaboro el anteproyecto de norma de eficiencia energetica en bombas verticales tipo turbina con motor externo. Dicho documento ha cumplido con los tramites necesarios para la emision de una norma, habiendose publicado como Norma Oficial Mexicana (NOM-001-ENER-1995) el 22 de diciembre de 1995. En el presente articulo se mencionan los resultados del estudio para la realizacion de esta norma, considerando los ahorros energeticos, asi como la evaluacion economica que sustenta el proyecto de norma, indicando tambien el impacto ambiental que tendra su implantacion.

Work- influence of the renewable energy sources in the environment, their use in Cuba; Trabajo- Influencia de las fuentes energeticas renovables en el medio ambiente, su aplicacion en Cuba

Energy Technology Data Exchange (ETDEWEB)

Mendez Gonzalez, Mercedes; Sarmiento Sera, Antonio [Instituto Superior Politecnico Jose A. Echeverria (ISPJAE), Ciudad de la Habana (Cuba)

2000-07-01

Among the different renewable energy technologies, wind provides better possibilities in regions in which this resource is available. The advantages of wind, as well as solar energy technologies are less or none fuel costs and less environmental impacts. According to the current available technology development, the use of hybrid systems of photovoltaic and wind energy presents large opportunities to cover the energy needs of isolated areas, specially in facilities that don't have connection to the national transmission grid. This study presents the different environmental impacts that hybrid systems have (incorporing the landscape impacts as well as socioeconomical impacts) for the electricity generation in Cuba. We conclude that these systems allow an important power generation in Cuba, and that they have neglected impacts to the environment. The use hybrid systems in Cuba are particularly important in ecotourism facilities and other small industries. [Spanish] Dentro de las posibilidades energeticas y medioambientales de los distintos tipos de energias renovables; la eolica por su caracter limpio e inagotable, permite un gran desarrollo en aquellas areas que cuentan con el potencial necesario para su aplicacion. De forma similar la energia solar presenta ventajas importantes, ambos son recursos gratuitos, no contaminantes y disponibles en muchas localidades. Segun las tecnologias actualmente disponibles, la utilizacion de sistemas hibridos de energia solar fotovoltaica y eolica presenta mayor interes hoy en dia para cubrir consumos aislados, en instalaciones alejadas de la red nacional de electrificacion. Este trabajo plantea un estudio, de la afectacion que sobre el medio ambiente, tanto en el aspecto visual como socioeconomico, tienen las fuentes energeticas renovables, y especificamente los sistemas hibridos eolico- fotovoltaicos para la generacion de electricidad en Cuba, a partir de conocer los recursos eolico y solar disponible en el lugar del

Information system on energy; Sistemas de informacoes energeticas

Energy Technology Data Exchange (ETDEWEB)

Carvalho, Claudio Bezerra de [Universidade do Estado da Bahia, Salvador, BA (Brazil)]. E-mail: claudiobcarvalho@yahoo.com.br; Bajay, Sergio Valdir [Universidade Estadual de Campinas, SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico (NIPE); Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Energia]. E-mail: bajay@fem.unicamp.br

2006-07-01

This work sets guidelines for the development of a National System of Information on Energy, a System of Executive Information and a System of Geographic Information, all for the Ministry of Mines and Energy, considering the current level of technology in the development of computer systems and the advantages accruing from the implementation of such systems for the energy industry agents and for the Ministry management. The applications of such systems and the main concepts and characteristics involved in their implementation are presented. (author)

Energy efficiency: a necessity in complex surroundings; Eficiencia energetica: una necesidad en un entorno complejo

Energy Technology Data Exchange (ETDEWEB)

Menendez Perez, E. [Alcion Ingenieria Quimica, S.A. (Spain)

2005-10-15

A global analysis of the energy system with reference to the energy case of Spain in comparison to the yield of the European Union is proposed. The analysis discusses the problems originated by the climatic change and exhibits three decisive concepts in energy efficiency (investment, good use and productivity) along with three indicating phenomena of an efficient or incompetent development (mobility, tourism and urbanism). Next, it exemplifies possible evolution criteria of the electrical production systems along with an ideal of evolution in the generation systems simultaneously mentioning measures for the emissions reduction in the industry, particularly in the automotive industry. In addition, it considers the imposition of energy taxes in front of the non fulfillment of the emissions' control as an important restrictive measurement. In between, the solution initiatives that have had a short reach, such as the Kyoto protocol, and categorical conclusions are contemplated: The cleanest energy is the one than is not consumed, not because it is not available but because it is not necessary, therefore it is not demanded. [Spanish] Se propone un analisis global del sistema de energia con referencia al caso energetico de Espana en equiparacion al rendimiento de la Union Europea. El analisis discute las problematicas originadas por el cambio climatico y exhibe tres conceptos decisivos en la eficiencia energetica (inversion, buen uso y productividad) junto con tres fenomenos indicadores de un desarrollo eficiente o incompetente (movilidad, turismo y urbanismo). Enseguida ejemplifica posibles criterios de evolucion de los sistemas de produccion electrica junto con un ideal de evolucion en los sistemas de generacion, a la vez que cita medidas para la reduccion de emisiones en la industria, particularmente en la industria automotriz. Se considera la imposicion de impuestos energeticos frente al incumplimiento en el control de emisiones como una importante medida

Energy crisis and rationing: a comparison between the argentinian and brazilian programs; Crisis energetica y racionamiento: los programas de Argentina y Brasil, una comparacion

Energy Technology Data Exchange (ETDEWEB)

Urbiztondo, Santiago; Navajas, Fernando [Fundacion de Investigaciones Economicas Latinoamericanas (FIEL)(Argentina)

2006-01-15

Although they have been equitable compared, the energy policies taken by Brazil and Argentina as a solution to the energy crisis lived by each one of these countries in years 2001 and 2002, they have enormous differences in terms of the real problem and nature of the established measures. Firstly the central aspects of the demand rationing mechanism adopted by Brazil for the electrical crisis of 2001 are presented. Afterwards the measures adopted in Argentina during the 2004 crisis in the electricity and natural gas rationing are discussed. From this exhibition of facts, comparisons are made and conclusions extracted looking forward to clarify the important differences separating both cases, differences that as the study reveals meant for the Argentine scheme the breach of the expected objectives. In the last section the changes implemented in the Argentine scheme are reflected during year 2005 to counteract the bad results obtained, nevertheless this modifications attacked only in a partial way the original program weaknesses. [Spanish] Si bien han sido comparadas equitativamente, las politicas energeticas tomadas por Brasil y Argentina como solucion a las crisis energeticas vividas por cada uno en el 2001 y 2004 presentan enormes diferencias a nivel de problema real y naturaleza de las medidas establecidas. Primeramente son presentados los aspectos centrales del mecanismo de racionamiento de la demanda adoptados por Brasil en la crisis electrica de 2001. Luego se comentan las medidas adoptadas en Argentina durante su crisis en el ano 2004 en el racionamiento de electricidad y gas natural. A partir de esta exposicion de hechos se realizan comparaciones y se extraen conclusiones que buscan clarificar las importantes diferencias que separan a ambos casos, diferencias que, como revela el estudio, significaron para el esquema argentino el incumplimiento de los objetivos esperados. En la ultima seccion se reflejan los cambios implementados en el esquema argentino

The selection of the traction system based on the energy efficiency for vehicles of heavy service; La seleccion del tren motriz basada en la eficiencia energetica para vehiculos de servicio pesado

Energy Technology Data Exchange (ETDEWEB)

Rafael Morales, M.Y [Instituto Mexicano del Transporte, (Mexico); Cervantes de Gortari, J [Departamento de termoenergia, Facultad de ingenieria, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

2004-01-15

Transportation activities in Mexico, especially in heavy-duty vehicles, are affected by the low efficiency in fuel consumption. In spite of the advanced technology in energy efficiency that generally is being adopted and used in the Mexican cargo fleet, there is not a significant reduction in the operation costs of this very important economic activity. In this paper, an account about the influence that the selection of the traction system components has on the fuel consumption and the ascending capacity of the vehicle, is presented. As a result of the study, an algorithm based on real performance tests with optimal fuel economy, was developed. The program is useful for the selection of the most appropriate traction system of a given vehicle, taking into account the condition that has to fulfill for a give task. [Spanish] Entre los problemas que afectan a la economia del sector de autotransporte en Mexico, especialmente en el transporte destinado al servicio pesado, se encuentra el de baja eficiencia en el consumo de combustible. A pesar de la avanzada tecnologia que generalmente se va disponiendo y adoptando en el parque vehicular con relacion a la eficiencia energetica, el costo por toneladas transportada no ha disminuido de manera importante. En este trabajo, se presenta un estudio acerca de la influencia que tiene dentro de esta problematica la seleccion de los componentes del tren motriz en el consumo de combustible y en la capacidad de ascenso del vehiculo, en relacion con el peso de la carga transportada. Como resultado del estudio se desarrollo un algoritmo basado en las pruebas reales de desempeno a que puede someterse un vehiculo, buscando el regimen optimo de economia del combustible. El programa permite a las empresas de transporte, seleccionar el tren motriz mas adecuado para cada vehiculo teniendo en cuenta las operaciones a que debera sujetarse en un determinado servicio.

Energy saving in the house of social interest by means of the application of the power efficiency standard:NOM-020; Ahorro de energia en la vivienda de interes social mediante la aplicacion de la norma de eficiencia energetica: NOM-020

Energy Technology Data Exchange (ETDEWEB)

Diaz Jimenez, Rodolfo; Morillon Galvez, David [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

2001-07-01

In face of the urgent necessity of saving and of using in an efficient way the energy, the Secretariat of Energy (Sener) through the Comision Nacional para el Ahorro de Energia, (CONAE) (National Commission for Energy Saving) has promoted the design and application of different measures and programs of energy efficiency. The elaboration of standards of energy efficiency has been a subject of great importance to foment the adequate use of the energy resources. For the residential sector the standard first draft exists: NOM-020-ENER-1998 energy efficiency in constructions: Standard for the covering of buildings for housing up to three floors. In this study the thermal analysis of the cover of one of the house models more used in the construction of houses of social interest in Mexico. By applying the methodology proposed by the first draft of the Standard the thermal gains by conduction in roof and walls, and by radiation in windows were determined. The analysis was performed for several cities of the country with different climates, the results were compared with the values proposed in the Standard, the viability of application of this Standard in the sector of the house of social interest was analyzed and finally the energy saving in ceasing using air conditioning systems for interiors. [Spanish] Ante la imperiosa necesidad de ahorrar y usar de forma eficiente la energia, la Secretaria de Energia (Sener) a traves de la Comision Nacional para el Ahorro de Energia, (CONAE) ha promovido el diseno y aplicacion de diferentes medidas y programas de eficiencia energetica. La elaboracion de normas de eficiencia energetica ha sido un rubro de gran importancia para fomentar el uso adecuado de los recursos energeticos. Para el sector residencial existe el anteproyecto de norma: NOM-020-ENER-1998 ficiencia energetica en edificaciones: Norma para la envolvente de los edificios para uso habitacional hasta de tres pisos. En este estudio se presenta el analisis termico de la

Comparison of pituitary and recombinant human thyrotropin standards in an immunoradiometric system

International Nuclear Information System (INIS)

Blanca Fernandez, Silvia; Rodriguez Gonzalez, Julio Cesar; Nisembaum Alas, Amaparo; Sevy Gonzalez, O.

1998-01-01

Results of two standards of human thyrotropin of pituitaries (B) and recombinant (C) origen supplied by the Instituto of pesquisas Energeticas y Nucleares, Brazil, were compared in our immunoradiometric reference system that use an human thyrotropin pituitary standard of local production (A). This work was supported by the International Atomic Energy Agency for an inter-regional comparison and set up of a reference standard

Energy security. Reflection about the challenges and the alternatives for Mexico; Seguridad energetica. Reflexion en torno a los retos y las alternativas para Mexico

Energy Technology Data Exchange (ETDEWEB)

Melgar, Lourdes; Velasco Ibarra, Enrique [Secretaria de Energia (Sener) (Mexico)

2007-04-15

The two current major topics of the international discussion are the energy security and the world warming. Since 2005, it is searched to go forward with regard to the design of the alternative policies, which at the same time make possible both to assure the energy supply and to restrict the emissions. Mexico, therefore, is appealed both to assume its international leadership to confront the challenges of being a country with a consumer profile. [Spanish] La seguridad energetica y el cambio climatico son hoy temas centrales del debate internacional. A partir de 2005, se busca avanzar en el diseno de politicas alternativas que permitan a la vez asegurar el abasto energetico y limitar las emisiones. Mexico esta llamado a asumir su liderazgo internacional y a enfrentar los desafios de pais con perfil de consumidor.

Energy efficiency study of the domestic refrigerators inside of a controlled environment laboratory; Estudio de la eficiencia energetica de refrigeradores domesticos dentro de un laboratorio de ambiente controlado

Energy Technology Data Exchange (ETDEWEB)

Arroyo Cabanas, Fernando Gabriel

2004-04-15

The evaluation of the energy saving potential is looked for that exists in the park of domestic refrigerators of the country when replacing them by refrigerators of higher power efficiency, through a comparative analysis of the results obtained in experimental tests applied to domestic refrigerators, in agreement with Official Norm NOM 015-2002 and with the theoretical values reported by the manufacturers. Initially the park of domestic refrigerators used in Mexico (brand names, efficiency and electrical consumption) was studied with the objective of evaluating the electric energy consumption in the refrigerators at national level. Once with the consumption determined, a governmental program for the accelerated substitution of the park of domestic refrigerators of greater antiquity is proposed, for models of better power efficiency. Next, the characterization of the Laboratorio de Ambiente Controlado is made (preliminary tests of thermal stability and heat losses) to obtain the thermal conditions marked by Norm NOM-015-2002. Also relevant points for the experimental energy analysis are established in domestic refrigerators according to norm NOM-015-2002. Finally, a test protocol for domestic refrigerators applied in the LAC with base in this norm will be proposed and a validation of this by means of the necessary experimental tests and the required calculations will be carried out. Finally the obtained results of the tests of power efficiency applied to different models from domestic refrigerators, as well as conclusions are presented. [Spanish] Se busca evaluar el potencial de ahorro de energia que existe en el parque de refrigeradores domesticos del pais al sustituirlos por refrigeradores de mayor eficiencia energetica, a traves de un analisis comparativo de los resultados obtenidos de pruebas experimentales aplicadas a refrigeradores domesticos, de acuerdo con la Norma Oficial NOM.015-2002 y con los valores teoricos reportados por los fabricantes. Primeramente

Financing structure for the hydroelectric sector: the Companhia Energetica de Sao Paulo - CESP case; Estrutura de financiamento do setor hidreletrico: o caso da CESP

Energy Technology Data Exchange (ETDEWEB)

Leme, Thomaz Garcez

1987-12-31

The objective of this dissertation is to study the financial resources made use by Companhia Energetica de Sao Paulo - CESP - for its implantation and later expansion, during the period of 1967 to 1980. The motivation in developing this subject originated of CESP`s importance in the Brazilian electric power sector. The dissertation is divided into three chapters. The first chapter describes the power sector in the state of Sao Paulo before CESP`s creation and after its consolidation. The second chapter studies some matter that shows the importance of company in the Brazilian power sector. In the third chapter, we study the performance of own resources and the third resources in CESP`s financing. At the end of the study the most important conclusion is that the own resources, more than third resources, were the prime motive liable in CESP`s financing during the period. (author) 102 refs., 23 figs.

Financing structure for the hydroelectric sector: the Companhia Energetica de Sao Paulo - CESP case; Estrutura de financiamento do setor hidreletrico: o caso da CESP

Energy Technology Data Exchange (ETDEWEB)

Leme, Thomaz Garcez

1988-12-31

The objective of this dissertation is to study the financial resources made use by Companhia Energetica de Sao Paulo - CESP - for its implantation and later expansion, during the period of 1967 to 1980. The motivation in developing this subject originated of CESP`s importance in the Brazilian electric power sector. The dissertation is divided into three chapters. The first chapter describes the power sector in the state of Sao Paulo before CESP`s creation and after its consolidation. The second chapter studies some matter that shows the importance of company in the Brazilian power sector. In the third chapter, we study the performance of own resources and the third resources in CESP`s financing. At the end of the study the most important conclusion is that the own resources, more than third resources, were the prime motive liable in CESP`s financing during the period. (author) 102 refs., 23 figs.

Energetic sustainability: Challenges and options in Mexico; Sustentabilidad energetica: Retos y opciones en Mexico

Energy Technology Data Exchange (ETDEWEB)

Rosas Flores, Dionicio; Sheinbaum Pardo, Claudia [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

2000-07-01

In this report present a general overview of energy trends and objectives of policy for Mexico, in the context of sustainable development. The work is divided in two main parts: the first one presents trends in energy use and potential, energy sector reform, social and economics indicators and revision of efficiency and renewable energy. The second part discusses options and instruments of energy politics for the country in regard of the sustainable development. The energy is central to concerns of sustainable development, affecting economic; the local and global environment, and social problems as poverty, population, health and education. Mexico should promote political energy that permit the fulfillment the energy requirements while developing strategies that help to alleviate the social problems and productivity, based on lesser environmental impacts. [Spanish] Este reporte presenta una vision sobre las tendencias energeticas de Mexico y plantea prioridades y objetivos de politica para el pais, en el contexto de desarrollo sustentable. El trabajo muestra dos partes principales: la primera seccion presenta tendencias en el uso de energia, potenciales energeticos e indicadores economicos y sociales, ademas de una revision de eficiencias y politicas de energias renovables. La segunda parte discute opciones, instrumentos y restricciones en el contexto del desarrollo energetico sustentable en el pais. La energia es un elemento central en el desarrollo ya que esta relacionado con la economia, el ambiente local y global y aspectos sociales como pobreza, poblacion, salud y educacion. Esto obliga en Mexico a promover politicas que permitan la cobertura de los requerimientos energeticos, las cuales deben desarrollarse de manera conjunta con estrategias, para ayudar a disminuir los problemas, productivos y sociales con menores impactos ambientales.

Energy saving in heat exchangers of industrial refrigeration systems; Ahorro de energia en intercambiadores de calor en los sistemas de refrigeracion industrial

Energy Technology Data Exchange (ETDEWEB)

Padilla, A; Romero Paredes, Hernando; Ambriz, Juan Jose [Universidad Autonoma Metropolitana-Iztapalapa, Mexico, D. F. (Mexico)

1994-12-31

This paper presents the energy losses of the heat exchangers utilized in industrial refrigeration systems . The effects of the different scaling products on the heat transfer rates are presented and the energy not transferred because of them is evaluated. A simplified method for the evaluation is developed and applied to the evaporators and condensers more frequently employed in the industrial refrigeration systems. The internal and external heat transfer coefficients are evaluated in different types of heat exchangers. The energy losses as a function of the scale thickness on the heat exchanger is shown. [Espanol] El trabajo presenta las perdidas energeticas que se tienen en los intercambiadores de calor usados en los sistemas de refrigeracion industrial. Se presentan los efectos que tienen los diferentes incrustantes en las tasas de transferencia de calor y se evalua la energia que no se transfiere causada por aquellos. Se desarrolla un metodo simplificado de evaluacion y se aplica a los evaporadores y condensadores mas comunes empleados en los sistemas de refrigeracion industrial. Se evaluan los coeficientes internos y externos en diferentes tipos de intercambiadores. Se muestran las perdidas energeticas en funcion del espesor del incrustante en la pared del intercambiador.

Treating residual water according to the demands of its ulterior use: case of Neuquen river, Patagonia, Argentina; Optimizacion de requisitos de tratamiento de aguas residuales basado en la calidad del agua de acuerdo con el uso del cuerpo receptor: caso rio Neuquen, Patagonia, Argentina

Energy Technology Data Exchange (ETDEWEB)

Polla, Gabriela Maria; Dufilho, Ana Cecilia; Horne, Federico [Universidad Nacional del Comahue (Argentina)

2006-07-15

A developed methodology allows making a regional pacification based on the river's water quality and their guide levels for different uses. To get this methodology it was used an optimization model that allows obtaining the best combination of town and industrial liquid treatments of the region, which can make cheaper their construction and maintenance costs. The established regional stages of economical development, were simulated with the QUAL2E model, from this model was obtained the restriction coefficients of the optimization model. More over, this model allowed to prognosticate the behavior of the principal water quality components (dissolved and biochemical demand of oxygen, nitrogen, phosphorus and others) for different proposed stages. This methodology was applied over a section of Neuquen River (Argentina) which receives urban, industrial and farming effluents of three cities Centenario (Plant 1), Cinco Saltos (Plant 2) and Parque Industrial (Plant 3). From results, it can be affirmed that under present situation, there is not contamination hazard. However, under future scenarios, advanced and secondary treatment is required to assure meeting the quality standards, particularly when river discharge approach it annual minimum. [Spanish] Se desarrollo una metodologia que permite hacer una planificacion regional basada en la calidad de agua del rio y sus niveles guias para distintos usos. Para ello se utilizo un modelo de optimizacion que permite obtener la mejor combinacion de tratamientos de liquidos municipales e industriales de la region que minimicen sus costos de construccion y mantenimiento. Los escenarios de desarrollo economico regional planteados se simularon con el modelo QUAL2E, de donde se obtuvieron los coeficientes de las restricciones del modelo de optimizacion. El modelo de simulacion permitio, ademas, pronosticar el comportamiento de los principales componentes de calidad del agua (oxigeno disuelto, demanda bioquimica de oxigeno

Energy demand in solar home systems; Demanda energetica em solar home systems

Energy Technology Data Exchange (ETDEWEB)

Trigoso, Federico Morante

2000-07-01

The central objective of this work is to understand the relationships between the energy demand and technical, economic, social and cultural factors that could influence it. For this a field research was established with the inclusion of 18 families distributed in four communities located in the South Coast of the Vale da Ribeira, Vale da Ribeira. The energy consumption of these families was measured along more than one year and, to facilitate its execution, it was necessary to develop an equipment capable to supply the daily consumption in units of Ampere-hour. This instrument was coupled to the photovoltaic systems in those communities and, besides, it was materialized a methodology of data obtaining that includes the users participation. The obtaining of data manually sought to provide an inter-relationship among the system, the user and the researcher with the purpose of, besides the data purely technicians, to obtain social and cultural information related with the energy uses. Through this methodology it was possible to verify that the energy demand is related with a series of factors that escape from the previous context. It was verified that the social and cultural behavior of the peoples will be reflected overall in the photovoltaic systems operation. The master thesis shows ways to deep in those studies that will be helpful to design methodology that includes all the parameters involved, still ignored. (author)

Comparison of pituitary and recombinant human thyrotropin standards in an immunoradiometric system; Comparacion de estandares de tirotropina de origen hipofisario y recombinante en un sistema immunoradiometrico

Energy Technology Data Exchange (ETDEWEB)

Blanca Fernandez, Silvia; Rodriguez Gonzalez, Julio Cesar; Nisembaum Alas, Amaparo; Sevy Gonzalez, O [Instituto Nacional de Endocrinologia, La Habana (Cuba)

1999-12-31

Results of two standards of human thyrotropin of pituitaries (B) and recombinant (C) origen supplied by the Instituto of pesquisas Energeticas y Nucleares, Brazil, were compared in our immunoradiometric reference system that use an human thyrotropin pituitary standard of local production (A). This work was supported by the International Atomic Energy Agency for an inter-regional comparison and set up of a reference standard

Energy optimization of Llobregat Desalination Plant by ERD; Optimizacion energetica de la Desalinizadora del Llobregat mediante sistemas de intercambio de presion

Energy Technology Data Exchange (ETDEWEB)

Miguel, C.; Cazurra, T.; Jurado, J. L.; Orbe, H.; Sanz, M. A.; Icaza, G.; Galtes, J.

2009-07-01

Construction of the Llobregat desalination seawater reverse osmosis (SWRO) plant will represent the guarantee of drinking water supply in the entire network managed by Aigues Ter Llobregat. The biggest cost associated to the drinking water supply produced by means of SWRO is mainly due to the necessary high operating pressures at the inlet of membranes. Due to this reality, Llobregat Desalination Plant incorporates the most state of the art and efficient technologies available, with the aim on minimizing the energy consumption. As a a result, one of the fundamental parts of these technologies are the Energy Recovery Devices (ERD), which recover the remaining energy (as a pressure form) in the brine out from the reverse osmosis, transferring this pressure to part of seawater feed towards the membranes, reducing the needs of energy consumption and the size the high pressure pump. (Author) 6 refs.

Characterization of ionization chambers in double face for X-ray detection systems

International Nuclear Information System (INIS)

Costa, Alessandro M. da; Caldas, Linda V.O.

2000-01-01

Two identical parallel-plate ionization chambers with collecting electrodes of different materials (in order to obtain different energy dependences), developed at Instituto de Pesquisas Energeticas e Nucleares, were tested in low energy X-radiation beams, simulating a special ionization chamber, of double face, in a Tandem system. The purpose of this work is to justify a project of a double face detection system utilizing ionization chambers in Tandem. In relation to conventional methods, this kind of system will provide more efficient and precise absorbed dose in air measurements and radiation effective energy determinations. The results obtained in relation to characteristics of short- and long-term stabilities and angular and energy dependence show that the project is feasible and very appropriate. (author)

Information flow among researchers at IPEN - Instituto de Pesquisas Energeticas e Nucleares

International Nuclear Information System (INIS)

Sugai, Mioka

1986-01-01

The information flow among a group of researchers at the Instituto de Pesquisas Energeticas e Nucleares of the Comissao Nacional de Energia Nuclear/Sao Paulo (IPEN-CNEN/SP) was analysed by means of a study of use and non-use of formal and informal information channels. The study proposed suggesting ideas for the improvement of the information network, as a means of contributing to the future planning of the information transfer structure among the I PEN technical-scientific community. A structural interview was used to collect the data. The researchers were characterized under functional, academic and professional aspects. Their information needs were identified as well as the factors which affect such needs. The researchers behaviour while searching for information was analysed by means of the critical incident technique. The informal communication networks were also identified according to a sociometric technique. The results show that in the Department included in the study, information flows equally through formal and informal channels. It is evident that there is a small correlation between degree of use and degree of importance of information sources. There is no evidence that those who make little use of formal channels supply their information needs by use of informal channels. It was patent that non-accessibility is the key factor which influences the non-use of information. The motivation of the use of formal sources is significantly inhibited by the fact that the library collection is not brought up-to-date. Relatively intense informal communication was verified both inter and intra-divisions. It is also evident that researchers with higher academic degree make more frequent use of formal channels, and stand a greater possibility of being identified as gatekeepers. However, those researchers who are considered more productive, at their present function, are not always those who make more frequent use of formal channels. The conclusions show that in order

Optimization in the use of energy in a petrochemical process; Optimizacion del uso de la energia en un proceso petroquimico

Energy Technology Data Exchange (ETDEWEB)

Picon Nunez, M. [Instituto de Investigaciones Cientificas, Universidad de Guanajuato, Guanajuato (Mexico); Quillares Vargas, L. [Tecnopinch, S.A. de C.V., Mexico, D. F. (Mexico); Torres Reyes, E. [Instituto de Investigaciones Cientificas, Universidad de Guanajuato, Guanajuato (Mexico)

1997-12-31

This paper presents the results of a study to reduce the energy consumption in a section of a dimethyl terephthalate plant. A thermal analysis was performed to evaluate the opportunities in energy saving. It was found that the plant operates with a high level of energy integration, that is, the maximum amount of heat is recovered by the generation of steam that is utilized in other sections of the plant. Nevertheless, the process design is such that an important part of the heating potential of this steam is lost due to the expansion it is subjected to adjust its pressure to the distribution header pressure which in this way limits its optimum usage. A proposal is also presented to reduce the losses of potential and the overall consumption of energy in approximately 5 millions of Btu/hr. [Espanol] En este trabajo se muestran los resultados de un estudio para reducir el consumo de energia en una seccion de una planta de dimetil tereftalato. Se realizo un analisis termico para evaluar las oportunidades de ahorro de energia. Se encontro que la planta opera con un alto nivel de integracion energetica, es decir, se recupera la maxima cantidad de calor en forma de vapor y se reutiliza en otras secciones de la planta. Sin embargo, el diseno del proceso es tal que una fraccion importante del potencial de calentamiento de este vapor se pierde debido a la expansion a que es sometido para ajustar su presion a la del cabezal de distribucion, limitando de esta manera su uso optimo. Se presenta una propuesta para reducir las perdidas de potencial y reducir el consumo global de energia en aproximadamente 5 millones de Btu/hr.

Optimization in the use of energy in a petrochemical process; Optimizacion del uso de la energia en un proceso petroquimico

Energy Technology Data Exchange (ETDEWEB)

Picon Nunez, M [Instituto de Investigaciones Cientificas, Universidad de Guanajuato, Guanajuato (Mexico); Quillares Vargas, L [Tecnopinch, S.A. de C.V., Mexico, D. F. (Mexico); Torres Reyes, E [Instituto de Investigaciones Cientificas, Universidad de Guanajuato, Guanajuato (Mexico)

1998-12-31

This paper presents the results of a study to reduce the energy consumption in a section of a dimethyl terephthalate plant. A thermal analysis was performed to evaluate the opportunities in energy saving. It was found that the plant operates with a high level of energy integration, that is, the maximum amount of heat is recovered by the generation of steam that is utilized in other sections of the plant. Nevertheless, the process design is such that an important part of the heating potential of this steam is lost due to the expansion it is subjected to adjust its pressure to the distribution header pressure which in this way limits its optimum usage. A proposal is also presented to reduce the losses of potential and the overall consumption of energy in approximately 5 millions of Btu/hr. [Espanol] En este trabajo se muestran los resultados de un estudio para reducir el consumo de energia en una seccion de una planta de dimetil tereftalato. Se realizo un analisis termico para evaluar las oportunidades de ahorro de energia. Se encontro que la planta opera con un alto nivel de integracion energetica, es decir, se recupera la maxima cantidad de calor en forma de vapor y se reutiliza en otras secciones de la planta. Sin embargo, el diseno del proceso es tal que una fraccion importante del potencial de calentamiento de este vapor se pierde debido a la expansion a que es sometido para ajustar su presion a la del cabezal de distribucion, limitando de esta manera su uso optimo. Se presenta una propuesta para reducir las perdidas de potencial y reducir el consumo global de energia en aproximadamente 5 millones de Btu/hr.

Exposition and evaluation of scenarios for the planning of the national power sector; Planteamiento y evaluacion de escenarios para la planeacion del sector energetico nacional

Energy Technology Data Exchange (ETDEWEB)

Gutierrez R, Ranulfo; Flores L, Marco P; Gonzalez Santalo, Jose M; Sanchez H, Laura E; Castrejon B, David; Porras L, Gladys L; Lopez A, Esmeralda; Lima R, Deytia [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2006-07-01

In this article the Model of Optimization of Provision and Distribution of Electricity and Fuels is described, which is the analysis tool used by the responsible national organisms to cover the national demand of fuels and electricity for the accomplishment of studies that provide support elements in the exposition of policies covering the national demands, simultaneously diminishing the cost and reducing the environmental impact. This tool determines the combination of technologies and fuels that imply the smaller cost for the country at the time of covering the energy demands. This document extends on the analytical resources and planning that serve as a base to the Model and on its complements, such as risk estimations facing each investment alternative. All this with the purpose of providing more reliable information to the decision maker group in the matter of energy policies. [Spanish] En este articulo se describe el Modelo de Optimizacion de Suministro y Distribucion de Electricidad y Combustibles, que es la herramienta de analisis empleada por los organismos nacionales responsables de cubrir la demanda nacional de combustibles y electricidad para la realizacion de estudios que proporcionen elementos de apoyo en el planteamiento de politicas que cubran las demandas nacionales, al mismo tiempo que minimicen el costo y reduzcan el impacto ambiental. Esta herramienta determina la combinacion de tecnologias y combustibles que impliquen el menor costo para el pais al momento de cubrir las demandas de energeticos. Este documento amplia sobre los recursos analiticos y planeaciones que sirven de base al modelo y sobre sus complementos, como estimaciones de riesgo frente a cada alternativa de inversion. Todo esto con el fin de suministrar informacion mas confiable al grupo que toma las decisiones en materia de politicas energeticas.

Systems for the calculation of electrical parameters and energy efficiency for high-capacity hydroelectric generators; Sistemas para el calculo de parametros electricos y eficiencia energetica para generadores hidroelectricos de gran capacidad

Energy Technology Data Exchange (ETDEWEB)

Reyes Martinez, Oscar Alfonso; Pascacio de los Santos, Alberth; Perez Abad, Carlos Alberto [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Leon Rivera, Nicolas [CFE-LAPEM, Irapuato, Guanajuato (Mexico)

2012-07-01

In recent years, the Comision Federal de Electricidad (CFE) has developed important hydroelectrical power projects in Mexico. Most of them are located in the Santiago River Hydrological System in Nayarit, Mexico. A total of 27 projects with a capacity of 4,300 MW are considered but only 32% of them have been carried out. One of the most ambitious projects that continue in process of construction is the Hydroelectrical Plant La Yesca. This project will conclude in late 2012 and consists of two electric generators of 375 MW, 17 kV. It will be second in power and the third in electrical generation at the system. According to national and international standards, a set of static and dynamic tests must be performed in these generators before commissioning, to ensure their proper operation. Winding stator high voltage endurance test, three phase sudden short circuit test and energy efficiency calculation are some of the most important tests to be performed in a new electrical generator. These tests are difficult to perform on-site due to the equipment capacity required, so very few companies in the world can conduct them. In Mexico no one has the necessary infrastructure for testing in high capacity hydroelectric generators such as those from La Yesca, so the Laboratorio de Pruebas a Equipos y Materiales (LAPEM) has invested in projects to improve this project in order to meet the needs of the Mexican electricity sector. This paper is a description of the systems developed for the calculation of electrical parameters and energy efficiency for this class of generators. [Spanish] En los ultimos anos, la Comision Federal de Electricidad (CFE) ha desarrollado importantes proyectos hidroelectricos en Mexico. La mayor parte se ubican en el Sistema Hidrologico del Rio Santiago en Nayarit, Mexico. Se consideran un total de 27 proyectos con capacidad de 4300 MW, pero solo 32 % de ellos se han llevado a cabo. Uno de los proyectos mas ambiciosos que continua en proceso de

Selection of the traction based on the power efficiency for vehicles of heavy service; La seleccion del tren motriz basada en la eficiencia energetica para vehiculos de servicio pesado

Energy Technology Data Exchange (ETDEWEB)

Morales, Rafael [Instituto Mexicano del Transporte, (Mexico); Cervantes de Gortari, J. [Facultad de Ingenieria, Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D.F. (Mexico)

2004-03-01

Transportation activities in Mexico, especially in heavy-duty vehicles, are affected by the low efficiency in fuel consumption, in spite of the advanced technology in energy efficiency that generally is being adopted and used in the Mexican cargo fleet, there is not a significant reduction in the operation costs of this very important economic activity. In this paper, an account about the influence that the selection of the traction system components has on the fuel consumption and the ascending capacity of the vehicle, is presented. As a result of the study, an algorithm based on real performance tests with optimal fuel economy, was developed. The program is useful for the selection of the most appropriate traction system of a given vehicle, taking into account the condition that has to fulfill for a given task. [Spanish] Entre los problemas que afectan a la economia del sector de autotransporte en Mexico, especialmente en el transporte destinado al servicio pesado, se encuentra el de baja eficiencia en el consumo de combustible. A pesar de la avanzada tecnologia que generalmente se va disponiendo y adoptando en el parque vehicular con relacion a la eficiencia energetica, el costo por tonelada transportada no ha disminuido de manera importante. En este trabajo, se presenta un estudio acerca de la influencia que tiene dentro de esta problematica la seleccion de los componentes del tren motriz en el consumo de combustible y en la capacidad de ascenso del vehiculo, en relacion con el peso de la carga transportada. Como resultado del estudio se desarrollo un algoritmo basado en las pruebas reales de desempeno a que puede someterse un vehiculo, buscando el regimen optimo de economia del combustible. El programa permite a las empresas de transporte, seleccionar el tren motriz mas adecuado para cada vehiculo teniendo en cuenta las operaciones a que debera sujetarse en un determinado servicio.

Parametric sensitivity of two axis models for turbo-generators; Sensibilidad parametrica de modelos de dos ejes para turbogeneradores

Energy Technology Data Exchange (ETDEWEB)

Morales Castorena, Armando

2003-06-15

also believed that some insights into the electromagnetic phenomena of the machine can be achieved from these studies, because of the mathematical representation that the fitness functions do of the physics of the machine. A set of five equivalent circuits on the d axis and four on the q axis were studied. The difference between circuits is the number of damper windings that are modeled. These windings represent the damper effects of the rotor during transient states of the machine. When modeling rotor damping effects, the more number of damper windings is included the better is the fitness of the circuit frequency response to the one of the machine, also leading to better results during dynamic simulations. [Spanish] En esta tesis se presentan los resultados de un estudio de sensibilidad parametrica realizado a circuitos equivalentes de dos ejes de turbogeneradores. Los circuitos estan formados por elementos inductivos y resistivos, cuya conectividad representa el acoplamiento magnetico y electrico al interior de la maquina, y las perdidas energeticas en la misma. Se tienen dos circuitos equivalentes, uno para el eje directo (d) y otro para el eje de cuadratura (q), debido a que el turbogenerador es modelado en el marco de referencia del rotor con la transformacion de Park. Las magnitudes de los parametros de los circuitos han sido determinados previamente a partir de pruebas de respuesta a la frecuencia en reposo. La respuesta a la frecuencia fue determinada haciendo uso de un modelo de elementos finitos de un turbogenerador. La tecnica de determinacion de la magnitud de los parametros consiste en un proceso de optimizacion basado en un algoritmo hibrido (combinacion de algoritmo genetico y algoritmo deterministico), cuyo indice de optimizacion esta formado por el cuadrado de las diferencias de las magnitudes y los angulos de fase entre las respuestas a la frecuencia del circuito y de la maquina. Se tiene entonces que las magnitudes de los parametros de los circuitos

Il Raffrescamento per Ventilazione

DEFF Research Database (Denmark)

Perino, Marco; Heiselberg, Per Kvols

2016-01-01

termicamente e sempre più a tenuta d'aria. Tali misure hanno consentito indubbiamente di ridurre la domanda energetica per il riscaldamento invernale, ma hanno determinato delle crescenti problematiche di surriscaldamento dell'ambiente interno. Molti degli edifici ad alta efficienza energeti-ca di nuova...

Study of DNA damage with a new system for irradiation of samples in a nuclear reactor

Energy Technology Data Exchange (ETDEWEB)

Gual, Maritza R., E-mail: mrgual@instec.c [Instituto Superior de Tecnologias y Ciencias Aplicadas, InSTEC, Avenida Salvador Allende y Luaces, Quinta de Los Molinos, Plaza de la Revolucion, Havana, AP 6163 (Cuba); Milian, Felix M. [Universidade Estadual de Santa Cruz, UESC (Brazil); Deppman, Airton [Instituto de Fisica, Universidad de Sao Paulo, IF-USP, Rua do Matao, Travessa R, no. 187, Ciudade Universitaria, Butanta, CEP 05508-900, Sao Paulo (Brazil); Coelho, Paulo R.P. [Instituto de Pesquisas Energeticas e Nucleares, IPEN-CNEN/SP (Brazil)

2011-02-15

In this paper, we report results of a quantitative analysis of the effects of neutrons on DNA, and, specifically, the production of simple and double breaks of plasmid DNA in aqueous solutions with different concentrations of free-radical scavengers. The radiation damage to DNA was evaluated by electrophoresis through agarose gels. The neutron and gamma doses were measured separately with thermoluminescent detectors. In this work, we have also demonstrated usefulness of a new system for positioning and removing samples in channel BH3 of the IEA-R1 reactor at the Instituto de Pesquisas Energeticas e Nucleares (Brazil) without necessity of interrupting the reactor operation.

Monitoring of standalone photovoltaic systems applied to rural electrification areas; Avaliacao de desempenho e identificacao de falhas em sistemas fotovoltaicos isolados aplicados a eletrificacao rural

Energy Technology Data Exchange (ETDEWEB)

Machado-Neto, L. V. B.; Cabral, C. V. T.; Oliveira-Filho, D.; Diniz, A. s. A. C.

2004-07-01

The sustainability of standalone photovoltaic systems passes through an accompaniment of the systems installed in the field. To subsidize this accompaniment it had been developed procedures for monitoring a similar system in laboratory. The standalone photovoltaic system monitored is similar to the systems installed by Companhia Energetica de Minas Gerais - CEMIG in the schools of isolated communities, inside the Solar Light Program. The system was simulated and the aims were to optimize the project and carry out a comparative study with the monitored results. The assembly procedure of the facility consisted of the implantation of the sensors, installation of acquisition boards and development of the monitoring program. The results presented here will allow the development of a program of preventive maintenance of the systems installed by CEMIG. (Author)

The biological degradation as an energy option, determination of the effects of the aerobic phase on the subsequent production of biogas in a sanitary landfill; La degradacion biologica como una opcion energetica, determinacion de los efectos de la fase aerobia sobre la subsecuente produccion de biogas en un relleno sanitario

Energy Technology Data Exchange (ETDEWEB)

Aguilar Juarez, Oscar [Asesoria de Servicios Ambientales del Bajio (ASSB), (Mexico)

2010-07-01

The present work deals with the energy evaluation of biological processes as energy source and is based on works concerning laboratory, pilot and field research. The objective of the research is to integrate the effect of the aerobic phase during the process of degradation of organic residues (basically the organic fraction of domestic residues), where the last aim is the biogas production. The usefulness of the results is reflected in the suitable estimation of the filling of a sanitary landfill considering the composition of the residues deposited and the effects that this management will have on the run-up time of the same and the velocity of biogas production. Finally, integrates a reflection on the intrinsic energy implications of the process and of the biogas yielding, which is evaluated as well as energy source. [Spanish] El presente trabajo trata sobre la valoracion energetica de procesos biologicos como fuente de energia y se basa en trabajos de investigacion a nivel de laboratorio, piloto y de campo. El objetivo de la investigacion es integrar el efecto de la fase aerobia durante el proceso de degradacion de residuos organicos (basicamente la fraccion organica de residuos domesticos), donde el fin ultimo es la produccion de biogas. La utilidad de los resultados se refleja en la estimacion adecuada del llenado de un relleno sanitario considerando la composicion de los residuos ahi depositados y los efectos que tendra esta gestion sobre el tiempo de estabilizacion de los mismos y la velocidad de produccion de biogas. Finalmente, se integra una reflexion sobre las implicaciones energeticas intrinsecas al proceso y del rendimiento de biogas, el cual a su vez es valorizado como fuente de energia.

Electronic system for the automation of current measurements produced by ionization chambers

International Nuclear Information System (INIS)

Brancaccio, Franco; Dias, Mauro da Silva

2002-01-01

Ionization Chambers in current mode operation are usually used in Nuclear Metrology in the determination of radionuclide activity. For this purpose measurements of very low ionization currents, in the range of 10 -8 to 10 -14 A, are required. Usually, electrometers perform the current integration method under command of signals from an automation system, in order to reduce the measurement uncertainties. In the present work, an automation system, developed for current integration measurements at the Laboratorio de Metrologia Nuclear (LMN) of Instituto de Pesquisas Energeticas e Nucleares (IPEN), is described. This automation system is composed by software (graphic interface and control) and an electronic module connected to a microcomputer, by means of a commercial data acquisition card CAD12/32 (LYNX Tecnologia Eletronica Ltda.). Measurements, using an electrometer Keithley 616 (Keithley Instruments, Inc) and an ionization chamber IG12/A20 (20 th Century Electronics Ltd.), were performed in order to check the system and for validating the project. (author)

An Application of Course Scheduling in the Brazilian Air Force

Science.gov (United States)

2012-03-01

LA - lnstituto de Logistic ada Forc;;a Aerea Brasileira- Av Monteiro Lobato 5335- Guarulhos - SP - Brazil •Tel (55 ) 11 -64652109 Email julio inb...February, 2005, from http://www.sc.ehu.es/ccwbayes/docencia/mmcc/docs/ lecturas -heuristicos- optimizacion/TimetablingbyGAs.pdf, accessed on 10th

Cogeneration Systems; Sistemas de Cogeneracion

Energy Technology Data Exchange (ETDEWEB)

Fernandez M, Manuel F; Huante P, Liborio; Romo M, Cesar A [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2006-07-01

The present article deals on relevant aspects on the subject of cogeneration within the Mexican territorial limits. In the first place it is presented the role of Mexico in terms of its cogeneration potential, the type of service that has obtained from this predominant modality of cogeneration for self-supplying, the most propitious sectors to develop it, its legislations on the matter, the projects made for the implementation of cogeneration plants, as well as the existing cogeneration schemes for its respective optimization proposals. Without leaving out the analysis on the different types of evaluation on the efficiency of cogeneration systems and the aspects to consider for the election of a generation cycle. [Spanish] El presente articulo trata sobre aspectos relevantes en materia de cogeneracion dentro de los limites territoriales de la nacion mexicana. Se muestra en primer lugar el papel de Mexico en terminos de su potencial de cogeneracion, el tipo de servicio que ha obtenido de esta predominantemente (modalidad de cogeneracion para autoabastecimiento), los sectores mas propicios para desarrollarla, sus legislaciones al respecto, los proyectos realizados para la implementacion de plantas de cogeneracion, asi como los esquemas de cogeneracion existentes con sus respectivas propuestas de optimizacion. Sin dejar de lado el analisis sobre los distintos tipos de evaluacion de la eficiencia de sistemas de cogeneracion y los aspectos a considerar para la eleccion de un ciclo de generacion.

Web based system architecture for long pulse remote experimentation

International Nuclear Information System (INIS)

Heras, E. de las; Lastra, D.; Vega, J.; Castro, R.; Ruiz, M.; Barrera, E.

2010-01-01

Remote experimentation (RE) methods will be essential in next generation fusion devices. Requirements for long pulse RE will be: on-line data visualization, on-line data acquisition processes monitoring and on-line data acquisition systems interactions (start, stop or set-up modifications). Note that these methods are not oriented to real-time control of fusion plant devices. INDRA Sistemas S.A., CIEMAT (Centro de Investigaciones Energeticas Medioambientales y Tecnologicas) and UPM (Universidad Politecnica de Madrid) have designed a specific software architecture for these purposes. The architecture can be supported on the BeansNet platform, whose integration with an application server provides an adequate solution to the requirements. BeansNet is a JINI based framework developed by INDRA, which makes easy the implementation of a remote experimentation model based on a Service Oriented Architecture. The new software architecture has been designed on the basis of the experience acquired in the development of an upgrade of the TJ-II remote experimentation system.

Planning the expansion of electrical transmission networks with evolutionary programming; Planeacion de la expansion de redes de transmision electrica con programacion evolucionaria

Energy Technology Data Exchange (ETDEWEB)

Ceciliano Meza, Jose Luis

1997-12-31

In this work it is presented for the first time in the literature the solution of the problem of the planning the expansion of an electrical transmission network (PERTE) with the use of the Evolutionary Programming. The evolutionary programming is a stochastic method of optimization with similar characteristics to the generic algorithms, but different. During the development of this work it is shown what each one of these two heuristic methods of optimization consist of. Additionally, the main characteristics of other two heuristic methods known in the literature are described (Tabu Searching and Simulated Annealing). These two methods together with the genetic algorithms and decomposition of Benders have also been used to solve the problem of planning PERTE. The operation of the proposed algorithm of evolutionary programming was tested in two networks of electrical transmission. The first case of test is a system which is known in the literature. The second case is a representative system of the electrical transmission network of Central America. The results obtained improve all the results shown when applying different heuristic methods of optimization (genetic algorithms, simulated annealing and Tabu searching) to solve the same problem. [Espanol] En este trabajo se presenta por primera vez en la literatura, la solucion del problema de la planeacion de expansion de una red de transmision electrica (PERTE) con el uso de la Programacion Evolucionaria. La programacion evolucionaria es un metodo estocastico de optimizacion con caracteristicas similares a los algoritmos geneticos, pero diferente. Durante el desarrollo de este trabajo se muestra en que consiste cada uno de estos dos metodos heuristicos de optimizacion. Ademas, se describen las caracteristicas principales de otros dos metodos heuristicos conocidos en la literatura (busqueda Tabu y Recorrido Simulado). Estos dos metodos juntos con los algoritmos geneticos y descomposicion de Benders tambien han sido

The decrease of the energy performance for the soiling of the air filters in gas turbines; Disminucion de la eficiencia energetica por ensuciamiento de filtros de aire en turbinas de gas

Energy Technology Data Exchange (ETDEWEB)

Romero Paredes, H.; Ambriz, J. J.; Vargas, M.; Godinez, M.; Gomez, F.; Valdez, L.; Pantoja, G. [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Mexico D. F. (Mexico)

1995-12-31

The object of this paper is to study the effect in the turbine output of a gas turbine of the conditions of the compressor air inlet in going through a series of filters. The algorithm for the calculation of the energy losses due to the variation of the pressure drop caused by the filters according to their cleanliness condition. In the first part the series of variables that affect the gas turbines performance are exemplified, afterwards the characteristics of the air flow into a turbine are presented as well as their effects on the system. Later on, the results obtained of the system simulation are presented and compared with a real case. From the results it can be determined, that depending on the system and on the environment conditions the efficiency drop might be up to 3%, in accordance with the filters cleanliness. The maintenance periods strongly depend on the air quality variations at the filter house inlet in the zone where the power plant is located. [Espanol] El presente trabajo tiene por objetivo estudiar el efecto en la potencia generada en una turbina de gas de las condiciones de entrada del aire al compresor de una turbina de gas al pasar por un conjunto de filtros. Se presenta el algoritmo para la determinacion de las perdidas energeticas debidas a la variacion de la caida de presion generada por los filtros de acuerdo con su estado de limpieza. En la primera parte se ejemplifica el conjunto de variables que influyen en la eficiencia de las turbinas de gas, posteriormente se mencionan las caracteristicas de flujo de aire hacia una turbina y se muestran los efectos sobre el sistema. A continuacion se presentan los resultados obtenidos de la simulacion del sistema y se comparan con un caso real. De los resultados se puede apreciar que, dependiendo del sistema y de las condiciones ambientales el decremento en la eficiencia puede ser hasta del 3% en funcion del nivel de limpieza de los filtros. Los periodos de mantenimiento dependen fuertemente de las

The decrease of the energy performance for the soiling of the air filters in gas turbines; Disminucion de la eficiencia energetica por ensuciamiento de filtros de aire en turbinas de gas

Energy Technology Data Exchange (ETDEWEB)

Romero Paredes, H; Ambriz, J J; Vargas, M; Godinez, M; Gomez, F; Valdez, L; Pantoja, G [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Mexico D. F. (Mexico)

1996-12-31

The object of this paper is to study the effect in the turbine output of a gas turbine of the conditions of the compressor air inlet in going through a series of filters. The algorithm for the calculation of the energy losses due to the variation of the pressure drop caused by the filters according to their cleanliness condition. In the first part the series of variables that affect the gas turbines performance are exemplified, afterwards the characteristics of the air flow into a turbine are presented as well as their effects on the system. Later on, the results obtained of the system simulation are presented and compared with a real case. From the results it can be determined, that depending on the system and on the environment conditions the efficiency drop might be up to 3%, in accordance with the filters cleanliness. The maintenance periods strongly depend on the air quality variations at the filter house inlet in the zone where the power plant is located. [Espanol] El presente trabajo tiene por objetivo estudiar el efecto en la potencia generada en una turbina de gas de las condiciones de entrada del aire al compresor de una turbina de gas al pasar por un conjunto de filtros. Se presenta el algoritmo para la determinacion de las perdidas energeticas debidas a la variacion de la caida de presion generada por los filtros de acuerdo con su estado de limpieza. En la primera parte se ejemplifica el conjunto de variables que influyen en la eficiencia de las turbinas de gas, posteriormente se mencionan las caracteristicas de flujo de aire hacia una turbina y se muestran los efectos sobre el sistema. A continuacion se presentan los resultados obtenidos de la simulacion del sistema y se comparan con un caso real. De los resultados se puede apreciar que, dependiendo del sistema y de las condiciones ambientales el decremento en la eficiencia puede ser hasta del 3% en funcion del nivel de limpieza de los filtros. Los periodos de mantenimiento dependen fuertemente de las

Viva la revolucion energetica : in two short years, energy-smart Cuba has bolted past every country on the planet

Energy Technology Data Exchange (ETDEWEB)

Guevara-Stone, L. [Solar Energy International, Carbondale, CO (United States)

2008-07-01

The World Wildlife Fund (WWF) recently declared Cuba to be the only country in the world that is approaching sustainable development. The assessment was based on the United Nations Development Programme's Human Development Index (HDI) which is calculated using life expectancy, literacy and education per capita GDP. In the mid-1990s Cuba embarked on a campaign to save energy and use more renewables, including wind and solar energy. Equipping off-grid public schools, health clinics and social centres with solar energy panels made lights, computers and educational television programs accessible to all students. An effort in 2005 to decentralize energy involved generating electricity in smaller substations. More than 3,000 MW of power is now produced in 110 municipalities and blackouts have been essentially eliminated. In 2006, Cuba launched its Revolucion Energetica, an energy conservation plan to upgrade its 11 antiquated and inefficient thermoelectric plants. The country now consumes 34 per cent less kerosene, 37 per cent less liquefied petroleum gas and 80 per cent less gasoline. The five main aspects of the energy conservation plan are energy efficiency and conservation; increasing the availability and reliability of the national grid; incorporating more renewable energy technologies into its energy portfolio; increasing the exploration and production of local oil and gas; and international cooperation. In 2 years, nearly 2 million refrigerators, 1 million fans, 182,000 air conditions and 260,000 water pumps were replaced with more energy efficient models and compact fluorescent light bulbs were handed out for free until all incandescent bulbs were replaced. Cuba's per capita energy consumption is one-eighth that of the United States, while its access to health services, education levels and life expectancy match those of the United States. A new residential electricity tariff gives a favourable rate to residents who consume less than 100 kWh per month

IEA-R1 reactor - Spent fuel management

International Nuclear Information System (INIS)

Mattos, J.R.L. De

1996-01-01

Brazil currently has one Swimming Pool Research Reactor (IEA-R1) at the Instituto de Pesquisas Energeticas e Nucleares - Sao Paulo. The spent fuel produced is stored both at the Reactor Pool Storage Compartment and at the Dry Well System. The present situation and future plans for spent fuel storage are described. (author). 3 refs, 2 figs, 2 tabs

Simulation of Thermal Transients using CSMP

International Nuclear Information System (INIS)

Konuk, A.A.

1981-01-01

A mathematical model has been developed to simulate thermal transientes for the Hellum Loop of the 'Instituto de Pesquisas Energeticas e Nuleares', Sao Paulo. The model is based on the energy equation applied to the various components of the loop. The non-linear system of first order ordinary differential equation and algebraic equations has been solved using IBM'S 'System/360-Continuous System Modeling Program-CSMP'. The model has been tested satisfactory with experimental results. (Author) [pt

Study of social responsibility of the Nuclear and Energy Research Institute of Sao Paulo (IPEN/CNEN-SP); Estudo da responsabilidade social do Instituto de Pesquisas Energeticas e Nucleares de Sao Paulo (IPEN/CNEN-SP)

Energy Technology Data Exchange (ETDEWEB)

Mutarelli, Rita de Cassia

2014-07-01

Over the years, the socio-environmental concept has grown through programs, conferences and several activities that have been held in Brazil and worldwide. Sustainability and social responsibility are now an integral part of everyday life of organizations The Instituto de Pesquisas Energeticas e Nucleares (IPEN), which is the focus of this research, is committed to the improvement of Brazilian quality of life. Based on IPEN's mission, and due to the lack of tools for assessing socio-environmental actions, this research aims to propose an assessment tool for social responsibility, which may also be a methodological resource committed to the improvement of the Institute. Through indicators and dimensions, a methodology to assess social responsibility and identify both strengths and weaknesses was designed. The methodology was administered to IPEN, and the results demonstrated positive aspects regarding actions towards the internal publics and negative aspects towards the external publics that require improvement. The results obtained were satisfactory. Nevertheless, as the subject of this study is a broad theme, further studies are suggested. IPEN's board may use the results of this research as a tool to help them identify feasible socio-environmental actions to be implemented in the institute. (author)

Resonance analysis of the transformers winding owing of system transients; Analise de ressonancia de parte de enrolamentos de transformadores devido a transitorio no sistema

Energy Technology Data Exchange (ETDEWEB)

Alves, M F; Ribeiro, E E [MF Consultoria Ltda (Brazil); Aguiar Campos, W de [Companhia Energetica de Minas Gerais (CEMIG), Belo Horizonte, MG (Brazil)

1992-12-31

An analysis of the damage on power transformer winding during occurrence of electrical transients in substations, its causes and an analysis of its occurrence situations are presented. Results of studies in the substation Ouro Preto 2, made by CEMIG (Companhia Energetica de Minas Gerais) aiming an analysis of the possibility to occur damage in transformers winding are also reported 6 refs., 8 figs., 1 tab.

Proceedings of the 7 Annual conference of the Mexican association for the energy economy. The energy sector in Mexico: challenges and solutions. [Selected papers]; 7. Conferencia anual de la asociacion mexicana para la economia energetica. El sector energia en Mexico: retos y soluciones

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The Mexican Association for the Energy Economy (AMEE) had its VII annual conference, The energy sector in Mexico: challenges and solutions, in October, 2004. Some of the expounded topics are: technical and environmental aspects of the combined cycle power stations; analysis of the generation of electric power across biogas from sanitary landfills in Mexico; cogeneration in large power plants; methodologies for the calculation of relative efficiency: description and application of natural gas distributors in Latin American and others. [Spanish] La Asociacion Mexicana para la Economia Energetica A. C. (AMEE), llevo acabo su VII conferencia anual El sector energia en Mexico: retos y soluciones, en octubre del 2004. Algunos de los temas tratados son: Aspectos tecnicos y medioambientales de las centrales de ciclo combinado con gasificacion integrada; Analisis de la generacion de energia electrica a traves de biogas procedente de rellenos sanitarios en Mexico; Cogeneracion en grandes centrales de proceso; Metodologias para el calculo de eficiencia relativa: descripcion y aplicacion para distribuidores de gas natural en Latinoamerica y otros.

Comparison of the energy demand for comfort in houses of social interest in the municipality of Jiutepec, using the methodologies: degrees-day and TRNSYS; Comparacion de la demanda energetica para el confort de viviendas de interes social en el municipio de Jiutepec, utilizando las metodologias de grados-dia y de TRNSYS

Energy Technology Data Exchange (ETDEWEB)

Gijon, Miguel; Alvarez, Gabriela; Aguilar, Jorge; Xaman, Jesus; Sima, Efrain; Flores, Jason (Mexico)

2009-07-15

In this article a thermal-environmental study is presented in order to evaluate the energy demand in the Morelos state. From collected climatologic data in seven automatic weather stations a comparative diagnosis by the application of two methodologies is realized, such as the one of the Degrees-day and the transitory thermal simulation of TRNSYS to determine the energy demand in traditional dwellings of social interest located in different regions of the State. In the methodology of the degrees-day the ambient temperature for two seasons of the year is used (rainy and dry) and the energy demand for the comfort in the Morelos State is evaluated. For the thermal simulation with the TRNSYS the climatic data obtained in monthly averages is used to determine the thermal loads of the house and the energy requirements in the different regions of the State. The results of the energy demand obtained by both methodologies for the municipality of Jiutepec and a statistic analysis of the existing relation between the degrees-day of cooling and the energy demand for cooling that the dynamic simulations deliver are presented. [Spanish] En este articulo se presenta un estudio termico-ambiental a fin de evaluar la demanda de energia en el Estado de Morelos. A partir de datos climatologicos recolectados en siete estaciones meteorologicas automaticas se realiza un diagnostico comparativo por la aplicacion de dos metodologias, como son la de los Grados-dia y la simulacion termica transitoria de TRNSYS para determinar la demanda energetica en viviendas tradicionales de interes social ubicadas en diferentes regiones del Estado. En la metodologia de los grados-dia se utiliza la temperatura ambiental para dos temporadas del ano (lluvias y secas) y se evalua la demanda energetica del Estado de Morelos para el confort. Para la simulacion termica con el TRNSYS se utiliza la informacion climatica obtenida en promedios mensuales para determinar las cargas termicas de la vivienda y los

Georeferenced energy information system integrated of energetic matrix of Sao Paulo state from 2005 to 2035; Sistema de informacoes energeticas georreferenciadas integrado a matriz energetica do estado de Sao Paulo: 2005-2035

Energy Technology Data Exchange (ETDEWEB)

Alvares, Joao Malta [IX Consultoria e Representacoes Ltda, Itajuba, MG (Brazil); Universidade Federal de Itajuba (UNIFEI), MG (Brazil)

2010-07-01

A georeferenced information system energy or simply SIEG, is designed to integrate into the energy matrix of Sao Paulo from 2005 to 2035. Being an innovative request made by the Department of Sanitation and Energy of the state, this system would have the purpose to collect and aggregate information and data from several themes, relating this content in a geographic location spatialized. The main focus of the system is the analysis of the energy sector as a whole, from generation to final consumption, through all phases such as transmission and distribution. The energy data would also be crossed with various themes of support, contributing to the development of numerous reviews and generating sound conclusions. Issues such as environment, socio-economics, infrastructure, interconnected sectors, geographical conditions and other information could be entered, viewed and linked to the system. The SIEG is also a facilitator for planning and managing the energy sector with forecast models in possible future situations. (author)

Proceedings of the 20 National seminar on the rational use of energy and exposition of equipment and services. [Selected Papers]; 20. Seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios. Memoria Tecnica. [Ponencias seleccionadas

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

This document contains the proceedings of the 20 national seminar on the rational use of energy and exposition of equipment and services, organized by the Asociaciacion de Tenicos y Profesionistas en Aplicacion Energetica (ATPAE), in Mexico, D.F, from the 15 to the 19 of November of 1999. This Seminar covered subjects such as: Energy saving in the power sector, power efficiency in industrial processes and practical developments, practical cases of energy saving in industry, energy saving in constructions, transport, utilization of renewable energies, and energy and the environment. [Spanish] Este documento contiene la memoria tecnica del 20 seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios, organizado por la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), en Mexico, D.F., del 15 al 19 de noviembre de 1999. Este seminario trato de temas tales como: Ahorro de energia en el sector energetico, eficiencia energetica en procesos industriales y desarrollos practicos, casos practicos de ahorro de energia en la industria, ahorro de energia en edificaciones, transporte, aprovechamiento de energias renovables, y energia y ambiente.

Proceedings of the 22 National seminar on the rational an efficient use of energy and exposition of equipment and services. [Selected Papers]; 22. Seminario nacional sobre el uso racional y eficiente de la energia y exposicion de equipos y servicios. Memoria Tecnica. [Ponencias seleccionadas

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

This document contains the proceedings of the 22 national seminar on the rational and efficient use of energy and exposition of equipment and services, organized by the Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), in Mexico, D.F., from the 25 to the 29 of August of 2003. This Seminar covered subjects such as: Energy saving in the power sector, power efficiency in industrial processes and practical developments, practical cases of energy saving in industry, energy saving in constructions, transport, utilization of renewable energies and the environment. [Spanish] Este documento contiene la memoria tecnica del 22 seminario nacional sobre el uso racional y eficiente de la energia y exposicion de equipos y servicios, organizado por la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), en Mexico, D.F., del 25 al 29 de agosto de 2003. Este seminario trato de temas tales como: Ahorro de energia en el sector energetico, eficiencia energetica en procesos industriales y desarrollos practicos, casos practicos de ahorro de energia en la industria, ahorro de energia en edificaciones, transporte, aprovechamiento de energias renovables y ambiente.

Proceedings of the 21 National seminar on the rational use of energy and exposition of equipment and services. [Selected Papers]; 21 Seminario nacional sobre el uso racional del a energia y exposicion de equipos y servicios. Memoria Tecnica. [Ponencias seleccionadas

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

This document contains the proceedings of the 21 national seminar on the rational use of energy and exposition of equipment and services, organized by the Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), in Mexico, D.F., from the 14 to the 16 of March of 2001. This Seminar covered subjects such as: Energy saving in the power sector, power efficiency in industrial processes and practical developments, practical cases of energy saving in industry, energy saving in constructions, transport, utilization of renewable energies and the environment. [Spanish] Este documento contiene la memoria tecnica del 21 seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios, organizado por la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), en Mexico, D.F., del 14 al 16 de marzo de 2001. Este seminario trato de temas tales como: Ahorro de energia en el sector energetico, eficiencia energetica en procesos industriales y desarrollos practicos, casos practicos de ahorro de energia en la industria, ahorro de energia en edificaciones, transporte, aprovechamiento de energias renovables y ambiente.

A mathematical model for the simulation of thermal transients in the water loop of IPEN

International Nuclear Information System (INIS)

Pontedeiro, A.C.

1980-01-01

A mathematical model for simulation of thermal transients in the water loop at the Instituto de Pesquisas Energeticas e Nucleares, Sao Paulo, Brasil, is developed. The model is based on energy equations applied to the components of the experimental water loop. The non-linear system of first order diferencial equations and of non-linear algebraic equations obtained through the utilization of the IBM 'System/360-Continous System Modeling Program' (CSMP) is resolved. An optimization of the running time of the computer is made and a typical simulation of the water loop is executed. (Author) [pt

Information system of industrial security and environmental protection (SISPA) of PEMEX; Sistema de informacion de seguridad industrial y proteccion ambiental (SISPA) de PEMEX

Energy Technology Data Exchange (ETDEWEB)

Carrisoza B, Vicente; Bernal M, Hector M [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Cortazar F, Segio [Petroleos Mexicanos (Mexico)

2002-07-01

The Management of Supervision of Processes (GSP) in collaboration with the Management of Control and Instrumentation (GCI) of the Instituto de Investigaciones Electricas (IIE), has developed a system able to respond in a opportune and coordinated way to the attention and handling of emergencies, optimization of the number of reports and its content, reduction of the time in which the reports of industrial security and environmental protection arrive at their destiny, diminution of the manual process in the elaboration of reports and information and, finally, able to automatically calculate the associated performance indicators related to the efficiency of actions in each one the involved areas. [Spanish] La Gerencia de Supervision de Procesos (GSP) en colaboracion con la Gerencia de Control e Instrumentacion (GCI) del Instituto de Investigaciones Electricas (IIE), ha desarrollado un sistema capaz de responder de manera oportuna y coordinada a la atencion y manejo de emergencias, optimizacion del numero de reportes y su contenido, reduccion del tiempo en que los reportes de seguridad industrial y proteccion ambiental llegan a su destino, disminucion del proceso manual en la elaboracion de reportes e informes y, finalmente, capaz de calcular automaticamente los indicadores de desempeno asociados a la eficiencia de las acciones en cada una las areas involucradas.

19. National seminar on the rational use of energy and exposition of equipment and services. Transactions. [Selected Papers]; 19. Seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios. Memoria Tecnica. [Ponencias seleccionadas

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

This document contains the technical proceedings of the 19 national seminar on the rational use of energy and exposition of equipment and services, organized by the Asociacion de Tecnicos y Pofesionistas en Aplicacion Energetica (ATPAE) (Association of Technicians and Professionals on Energy Application) conducted in Mexico City on September 21-25, 1998. This seminar encompassed subjects such as: energy saving in the energy sector, energy efficiency in industrial processes and practical developments, practical cases of energy saving in industry, energy saving in buildings, transportation, non-renewable energy utilization and environmental impact and eco-energies. [Espanol] Este documento contiene la memoria tecnica del 19 seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios, organizado por la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), en Mexico, D.F, los dias 21-25 de septiembre de 1998. Este seminario trato de temas tales como: Ahorro de energia en el sector energetico, eficiencia energetica en procesos industriales y desarrollos practicos, casos practicos de ahorro de energia en la industria, ahorro de energia en edificaciones, transporte, aprovechamiento de energias renovables, e impacto ambiental y eco-energias.

19. National seminar on the rational use of energy and exposition of equipment and services. Transactions. [Selected Papers]; 19. Seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios. Memoria Tecnica. [Ponencias seleccionadas

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-12-31

This document contains the technical proceedings of the 19 national seminar on the rational use of energy and exposition of equipment and services, organized by the Asociacion de Tecnicos y Pofesionistas en Aplicacion Energetica (ATPAE) (Association of Technicians and Professionals on Energy Application) conducted in Mexico City on September 21-25, 1998. This seminar encompassed subjects such as: energy saving in the energy sector, energy efficiency in industrial processes and practical developments, practical cases of energy saving in industry, energy saving in buildings, transportation, non-renewable energy utilization and environmental impact and eco-energies. [Espanol] Este documento contiene la memoria tecnica del 19 seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios, organizado por la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), en Mexico, D.F, los dias 21-25 de septiembre de 1998. Este seminario trato de temas tales como: Ahorro de energia en el sector energetico, eficiencia energetica en procesos industriales y desarrollos practicos, casos practicos de ahorro de energia en la industria, ahorro de energia en edificaciones, transporte, aprovechamiento de energias renovables, e impacto ambiental y eco-energias.

Energetic policy, planning and regulation for isolated systems; Politica energetica, planejamento e regulacao para os sistemas isolados

Energy Technology Data Exchange (ETDEWEB)

Frota, Willamy Moreira [Manaus Energia, AM (Brazil); Companhia Energetica do Amazonas (CEAM), Manaus, AM (Brazil); Bajay, Sergio Valdir [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Estudos de Planejamento Energetico

2004-07-01

The service to the energy needs of the isolated places and, in matter, of the located ones in the North Area is confronted with a critical situation, that it opposes a structure of electric power supply with costs very superiors to the found in the interlinked systems to consumers' communities with patterns of income in general very inferior in relation to the national average, in many cases returned to extractive activities of small climbs and the a subsistence agriculture, living at places that are, usually, of difficult access. Therefore, the intrinsic characteristics of the isolated systems are the predominance of low load densities and the population dispersion. The regional savings assisted by the isolated systems cross, frequently, situations of deep economical stagnation, associated strongly to the lack of aggregation of value to the regional products. This lowers economical acting, ally to the characteristics of geographical isolation, as well as the lack of adoption of a specific and maintainable energy planning, integrated into programs of regional development are, without a doubt, the largest barriers that commit the viability of a good energy service the these areas (author)

Real-time data acquisition and processing platform for fusion experiments

International Nuclear Information System (INIS)

Ruiz, M.; Barrera, E.; Lopez, S.; Machon, D.; Vega, J.; Sanchez, E.

2004-01-01

This paper describes the features of the hardware and low-level software of the PXI real-time data acquisition and processing system developed for the TJ-II device located in the Centro de Investigaciones Energeticas Medioambientales y Tecnologicas (CIEMAT) in Madrid. This system fulfills three objectives: (1) to increase processing capabilities of standard data acquisition systems by adding specific processing cards, (2) to acquire and process data in real time with a view to deployment on steady state fusion devices, and (3) to develop the data acquisition and processing applications using graphical languages like LabView

Journal Bearings

Directory of Open Access Journals (Sweden)

Renato Brancati

1999-01-01

determined after acquiring and analysing the orbits described by the journal axis for assigned unbalance values in different operating conditions. Analysis of the results shows some particular operating features that were not entirely predicted by the theoretical model and which may give rise to malfunctions in the rotor-tilting pad bearings system. The tests were carried out in the rotor dynamics laboratory of the Dipartimento di Ingegneria Meccanica per l'Energetica at the University of Naples.

Optimization of ground source heat pumps systems through the implementation of hybrid systems; Optimizacion de las instalaciones de bomba de calor geotermica mediante la implementacion de sistemas hibridos

Energy Technology Data Exchange (ETDEWEB)

Magraner, T.; Quilis, M. S.; Martinez, S.

2009-07-01

One of the fundamental aspects to consider in the design of a ground heat pump system is the heat balance in the ground since thermal saturation of the ground produces a decreasing of the performance of the system throughout its useful life. The hybrid geothermal system which combined geothermal heat pump system with other systems for generation or dissipation energy are very suitable for balancing the heat exchanger meters needed for the proper functioning of the system, important aspect to reduce costs and achieve attractive return periods of the initial investment. Energesis Ingenieria has developed and implemented in two office buildings, a design of hybrid systems based on the combination of a geothermal heat pump and air-condensed units (dry coolers) that can ensure energy efficiencies comparable to geothermal pure systems, reducing substantially the investment cost. (Author) 5 refs.

Establishment of a primary standard system for low energy X-rays using a free air ionization chamber

International Nuclear Information System (INIS)

Silva, Natalia Fiorini da

2016-01-01

In this work a primary standard system was established for low energy X-rays (10 kV to 50 kV), using a free air ionization chamber with concentric cylinders, Victoreen (Model 481-5), at the Calibration Laboratory of Instruments (LCI) of the Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP). For this, a new ionization chamber alignment protocol was developed for the radiation system and a modification on the micrometer housing used for the movement of the internal cylinders was ma de. The results obtained for the stability and characterization tests showed to be within the limits established by the standards IEC 61674 and IEC 60731. The correction factors for photon attenuation in the air, transmission and scattering in the diaphragm, scattering and fluorescence and ion recombination were also determined. These values were compared with those obtained by the German primary standard laboratory, Physikalisch-Technische Bundesanstalt (PTB), showing good agreement. Finally, the absolute values of the quantity air kerma rate for the standard qualities direct beams MWV28 and WMV35 and the attenuated beams WMH28 and WMH35 were determined; the results are in agreement, with a maximum difference of 3,8% with the values obtained using the secondary standard system of LCI. (author)

Performance evaluation of the reference system for calibration of IPEN activities

International Nuclear Information System (INIS)

Martins, Elaine Wirney; Potiens, Maria da Penha A.

2011-01-01

The formation of good quality image in nuclear medicine services depends on several factors, including the radiopharmaceutical activity, which must be well determined by a specific apparatus, in perfect operating condition, called activimeter. Therefore, the establishment of a quality control program for measuring the radiopharmaceuticals radioactivity before being administered to the patient is crucial to the safe and effective use of the radiopharmaceuticals used in diagnostic and therapeutical procedures. Two activimeters, belonging by the Laboratorio de Calibracao do Instrumentos (LCI) of Instituto de Pesquisas Energeticas e Nucleares (IPEN), were evaluated: the secondary standard system NPL-CRC radionuclide calibrator, manufactured by Southern Scientific, and the work standard system CRC-15BT with traceability to National Institute of Standard and Technology (NIST). A set of standard sources of the radionuclides 1 '3 3 Ba, 57 Co and 137 Cs was used as reference to perform the quality control tests. The precision, accuracy and repeatability tests were in agreement with those established by the CNEN-NE 3.05 Brazilian standard, which recommends the variation limit of up to 10%, 5% and 5% respectively. The results obtained for the reproducibility tests presented a variation always below 1,5%, which means it is within the IEC 61674 international standard recommendation of up to 3%. Activimeters response regarding linearity showed concordance between the measured activities and the theoretical curve for both activimeters. (author)

The diversity of European energy policies

International Nuclear Information System (INIS)

2013-01-01

If many European Union countries have engaged in a mutation of their energy system, the direction chosen may be different from one country to the other with different specific goals, starting from different initial energy mixes and involving different financial and industrial means. The German 'Energiewende' (the 'energy turn'), the Spanish 'Sostenibilidad Energetica' or the British 'Climate Change Bill' are unique initiatives which, without coordination, can lead to detrimental consequences on the European power system. These policies represent as many experiences to meditate on in order to identify the advantages and drawbacks of these different approaches as well as their respective impact on the European power system and on markets operation

Piezoelectric business optimization for use in energy systems harvesting; Optimizacion de piezoelectricos comerciales para su uso en sistemas de Energy Harvesting

Energy Technology Data Exchange (ETDEWEB)

Jimenez Martinez, F. J.; Frutos, J. de; Alonso, D.; Vazquez, M.

2015-07-01

In this work, commercial piezoelectric materials are electro mechanically characterized, in different configurations for potential use in harvesting devices of mechanical energy, in order to store and use in the feeding of low power electronic systems. Optimization models considering two different types of mechanical energy are proposed: one for capture energy from continuous vibration, even low intensity and other for capture energy from impacts. Different configurations are discussed, and the feasibility of the models presented is analyzed by frequency vibration systems controlled and a test simulation of passing vehicles, designed and patented by POEMMA R and D group. Everyday applications in which devices in the configurations described may be used are listed. (Author)

Potential of energy saving with photovoltaic systems; Potencialidad de ahorro de energia con sistemas fotovoltaicos

Energy Technology Data Exchange (ETDEWEB)

Guzman S, Eusebio; Bratu S, Neagu [Universidad Autonoma Metropolitana, Mexico, D. F. (Mexico)

1998-12-31

This paper presents an approach on the application of photovoltaic systems in energy saving. The problem of the electric energy demand in the coming years is analyzed and its consequences on the environment and on the energy reserves of conventional sources. A model of the electric circuit equivalent to a photovoltaic cell illustrates the behavior of the photovoltaic cell in function of the climatological conditions. The former in order to show some of the limiting factors in this type of generator. Also, the evolution of the applications of the photovoltaic systems and its forecasting in the installed capacity in the next 20 years, is described. [Espanol] En este trabajo se presenta un enfoque de la aplicacion de los sistemas fotovoltaicos en el ahorro de energia. Se plantea el problema del crecimiento de la demanda energetica en los proximos anos y sus consecuencias sobre el medio ambiente y las reservas de energia por fuentes convencionales. Un modelo del circuito electrico equivalente de una celda fotovoltaica ilustra el comportamiento del generador fotovoltaico en funcion de las condiciones climatologicas. Lo anterior con el fin de mostrar algunas limitantes de este tipo de generador. Tambien se describe la evolucion de las aplicaciones de los sistemas fotovoltaicos y el pronostico de la potencia instalada en los proximos 20 anos.

Potential of energy saving with photovoltaic systems; Potencialidad de ahorro de energia con sistemas fotovoltaicos

Energy Technology Data Exchange (ETDEWEB)

Guzman S, Eusebio; Bratu S, Neagu [Universidad Autonoma Metropolitana, Mexico, D. F. (Mexico)

1999-12-31

This paper presents an approach on the application of photovoltaic systems in energy saving. The problem of the electric energy demand in the coming years is analyzed and its consequences on the environment and on the energy reserves of conventional sources. A model of the electric circuit equivalent to a photovoltaic cell illustrates the behavior of the photovoltaic cell in function of the climatological conditions. The former in order to show some of the limiting factors in this type of generator. Also, the evolution of the applications of the photovoltaic systems and its forecasting in the installed capacity in the next 20 years, is described. [Espanol] En este trabajo se presenta un enfoque de la aplicacion de los sistemas fotovoltaicos en el ahorro de energia. Se plantea el problema del crecimiento de la demanda energetica en los proximos anos y sus consecuencias sobre el medio ambiente y las reservas de energia por fuentes convencionales. Un modelo del circuito electrico equivalente de una celda fotovoltaica ilustra el comportamiento del generador fotovoltaico en funcion de las condiciones climatologicas. Lo anterior con el fin de mostrar algunas limitantes de este tipo de generador. Tambien se describe la evolucion de las aplicaciones de los sistemas fotovoltaicos y el pronostico de la potencia instalada en los proximos 20 anos.

Simulador de un optimizador físico de consultas relacionales basado en costes que considere predicados complejos

OpenAIRE

Fernández Rodríguez, Sergio

2012-01-01

Una de las fases del proceso de tratamiento de una consulta que lleva a cabo el tipo de lenguaje utilizado por los SGBD (lenguajes declarativos) y, más concretamente en la fase de optimización, es la que da sentido al software sobre el cual se trabajará a lo largo de este proyecto. Hay tres tipos de optimización (semántica, sintáctica, física); dicho programa simula sólo uno de los tres tipos de optimizaciones que se realizan: la optimización física.

Tendencies in the energy consumption and in the carbon dioxide emissions in the Mexican cement industry; Tendencias del consumo de energia y emisiones de bioxido de carbono de la industria cementera mexicana

Energy Technology Data Exchange (ETDEWEB)

Ozawa M, Leticia; Sheinbaum P, Claudia [Instituto de Ingenieria UNAM, Mexico, D. F. (Mexico)

1996-12-31

This paper analyzes the changes occurred in the energy consumption and carbon dioxide in the Mexican cement industry. For this purpose, the energy consumption and the emissions are broken up into three types of changes that affect the energy demand of an industry: activity, structure and energy intensity. According to this analysis it is found that the Mexican cement industry has suffered an important reduction in the energy intensity as a result of the disappearance, almost complete, of the wet production process, of the increment in the production of pozzolanic cement and in the opening of new high technology industries. With respect to the intensity of carbon dioxide emissions it does not decrease at the same rate than the energy intensity due to the increased consumption of the fuel oil over the natural gas. At the end of this paper an international comparison is presented of the energy specific consumption and of its emissions. [Espanol] En este articulo se analizan los cambios ocurridos en el consumo de energia y emisiones de bioxido de carbono de la industria cementera mexicana. Para ello, se desagrega el consumo de energia y las emisiones en tres tipos de cambios que influyen en la demanda energetica de una industria: actividad, estructura, e intensidad energetica. De acuerdo con este analisis se encuentra que la industria cementera mexicana ha sufrido un importante decremento en la intensidad energetica producto de la desaparicion, casi por completo, del proceso de produccion por via humeda, del incremento en la produccion del cemento puzolanico y de la apertura de nuevas industrias con alta tecnologia. Por su parte, la intensidad en las emisiones de bioxido de carbono no disminuye a la misma tasa que la intensidad energetica debido al incremento en el uso del combustoleo sobre el gas natural. Al final del articulo se presenta una comparacion internacional del consumo especifico de energia y de las emisiones.

Tendencies in the energy consumption and in the carbon dioxide emissions in the Mexican cement industry; Tendencias del consumo de energia y emisiones de bioxido de carbono de la industria cementera mexicana

Energy Technology Data Exchange (ETDEWEB)

Ozawa M, Leticia; Sheinbaum P, Claudia [Instituto de Ingenieria UNAM, Mexico, D. F. (Mexico)

1997-12-31

This paper analyzes the changes occurred in the energy consumption and carbon dioxide in the Mexican cement industry. For this purpose, the energy consumption and the emissions are broken up into three types of changes that affect the energy demand of an industry: activity, structure and energy intensity. According to this analysis it is found that the Mexican cement industry has suffered an important reduction in the energy intensity as a result of the disappearance, almost complete, of the wet production process, of the increment in the production of pozzolanic cement and in the opening of new high technology industries. With respect to the intensity of carbon dioxide emissions it does not decrease at the same rate than the energy intensity due to the increased consumption of the fuel oil over the natural gas. At the end of this paper an international comparison is presented of the energy specific consumption and of its emissions. [Espanol] En este articulo se analizan los cambios ocurridos en el consumo de energia y emisiones de bioxido de carbono de la industria cementera mexicana. Para ello, se desagrega el consumo de energia y las emisiones en tres tipos de cambios que influyen en la demanda energetica de una industria: actividad, estructura, e intensidad energetica. De acuerdo con este analisis se encuentra que la industria cementera mexicana ha sufrido un importante decremento en la intensidad energetica producto de la desaparicion, casi por completo, del proceso de produccion por via humeda, del incremento en la produccion del cemento puzolanico y de la apertura de nuevas industrias con alta tecnologia. Por su parte, la intensidad en las emisiones de bioxido de carbono no disminuye a la misma tasa que la intensidad energetica debido al incremento en el uso del combustoleo sobre el gas natural. Al final del articulo se presenta una comparacion internacional del consumo especifico de energia y de las emisiones.

Caracterizacion y optimizacion electroquimica de dispositivos electrocromicos duales basados en polimeros conductores

Science.gov (United States)

Padilla Martinez, Javier

The aim of this thesis is to emphasize the existing relations between electrochemical processes, or electrochemical magnitudes, and colour changes. The work is focused on two aspects: individual spectroelectrochemical characterization of the constituent materials followed by an electrochemical and optical study of the performance of the dual system constructed with those materials. The objective is the optimization of both electrochemical and optical processes in dual conducting polymer systems, obtaining experimental methodologies able to characterize, predict, and finally design optimal dual electrochromic devices. The first part of the study is focused on the development of the proper methodology to obtain an optical characterization of any electrochromic material as a function of its electrochemical properties. Materials used were poly((3,4-ethylenedioxy)thiophene) (PEDOT) and poly-(3,6-bis(2-(3,4-ethylenedioxy)thienyl)-N-methylcarbazole) (PBEDOT-NMCz). PEDOT films are coloured under reduction, while PBEDOT-NMCz are coloured under oxidation, showing complementary colouration, and so they can be used to construct a dual electrochromic device. Based on the obtained experimental results, a theoretical study was undertaken to establish the optical responses of a system comprising several electrochromic layers. The theoretically obtained relations were experimentally proved. Relations obtained allow the prediction of the maximum contrast configuration for a dual system, as a function of the individual electrochemical properties of each constituent material. The system studied was PEDOT/PBEDOT-NMCz. The third chapter deals with the proposal and development of a new experimental methodology able to register the individual oxidation states of each electrode during operation of a dual device, obtaining then direct information about device performance. This methodology allows the study of the influence of different physical and chemical variables, like ratio of redox

The 2030 Scenarios (Chapter 6 in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Los escenarios a 2030 (Capitulo 6 en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

Energy Technology Data Exchange (ETDEWEB)

Mulas del Pozo, Pablo [Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

2005-08-15

The quantification of the different scenarios that have been determined is an exercise that has as an aim illustrating on the interrelation between the parameters that affect the behavior of the energy system, more than having magnitudes on the size of the supply and energy demand for each type of primary energy. The credibility of the numbers is very small due to the many uncertainties in the long-term assumptions. The true value of the exercise is to understand the interrelationship of the different parameters that can affect the system and the impacts that can cause variants of the same. Also it is spoken of the obtained results with LEAP system that are related to the energy demand to year 2030 as well as the composition of the primary energy basket to be used and, the results obtained with the simplified method where, the determination of the demand in 2030 for both scenarios was made in simplified form through the determination of the values of the GIP and those of the energy intensity, being based on the rates of growth supposed for these two parameters in both periods to be considered. [Spanish] La cuantificacion de los diferentes escenarios que se han determinado es un ejercicio que tiene como fin el ilustrar sobre la interrelacion entre los parametros que afectan el comportamiento del sistema energetico, mas que el tener magnitudes sobre el tamano de la oferta y demanda energetica para cada tipo de energetico primario. La credibilidad de los numeros es muy pequena debido a las grandes incertidumbres en los supuestos a largo plazo. El verdadero valor del ejercicio es entender la interrelacion de los diferentes parametros que pueden afectar al sistema y los impactos que pueden causar variantes de los mismos. Tambien se habla de los resultados obtenidos con el sistema LEAP que se encuentran relacionados con la demanda energetica al 2030 asi como la composicion de la canasta de energeticos primarios a utilizarse y, los resultados obtenidos con el metodo

The 2030 Scenarios (Chapter 6 in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Los escenarios a 2030 (Capitulo 6 en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

Energy Technology Data Exchange (ETDEWEB)

Mulas del Pozo, Pablo [Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

2005-08-15

The quantification of the different scenarios that have been determined is an exercise that has as an aim illustrating on the interrelation between the parameters that affect the behavior of the energy system, more than having magnitudes on the size of the supply and energy demand for each type of primary energy. The credibility of the numbers is very small due to the many uncertainties in the long-term assumptions. The true value of the exercise is to understand the interrelationship of the different parameters that can affect the system and the impacts that can cause variants of the same. Also it is spoken of the obtained results with LEAP system that are related to the energy demand to year 2030 as well as the composition of the primary energy basket to be used and, the results obtained with the simplified method where, the determination of the demand in 2030 for both scenarios was made in simplified form through the determination of the values of the GIP and those of the energy intensity, being based on the rates of growth supposed for these two parameters in both periods to be considered. [Spanish] La cuantificacion de los diferentes escenarios que se han determinado es un ejercicio que tiene como fin el ilustrar sobre la interrelacion entre los parametros que afectan el comportamiento del sistema energetico, mas que el tener magnitudes sobre el tamano de la oferta y demanda energetica para cada tipo de energetico primario. La credibilidad de los numeros es muy pequena debido a las grandes incertidumbres en los supuestos a largo plazo. El verdadero valor del ejercicio es entender la interrelacion de los diferentes parametros que pueden afectar al sistema y los impactos que pueden causar variantes de los mismos. Tambien se habla de los resultados obtenidos con el sistema LEAP que se encuentran relacionados con la demanda energetica al 2030 asi como la composicion de la canasta de energeticos primarios a utilizarse y, los resultados obtenidos con el metodo

Development and implementation of a new pneumatic transfer system for materials irradiation at IEA-R1 reactor

International Nuclear Information System (INIS)

Fernando, Alberto de Jesus

2011-01-01

Pneumatic Transfer Systems (PTS) are classified as mechanical equipment largely operated all over the world for transport of a huge sort of objects, samples and materials located at nearly terminals or even at separated ones. System applicability is often recognized in many activities, such as medicine (hospital settings, clinical analysis labs), industry (steel, automobiles, mining, chemical, food, construction), trading (gas station, movies, supermarkets, banks, e-commerce) and federal agencies (post services, federal courts, public enterprises). In the nuclear settings, PTS shows also a vast array of applications, being a part of radioisotope production, as well as short-lived radiopharmaceuticals, including 67 Ga, 201 Tl, 18 F and 123 I-ultra pure. Besides, PTS are also used at radioactive waste management plants and research institutes that apply neutron activation analysis (NAA). This work was directed toward the design and operation of a new PTS for the IEA-R1 nuclear research reactor settled at Instituto de Pesquisas Energeticas e Nucleares (IPEN) for NAA application. With this aim, it was calculated the charge of reactor core grid plate and sample transport testing. Neutron flux at irradiating position was determined as 3,70 ± 0,26 10 12 n cm -2 s -1 . (author)

Optimization of the productivity in the mine; Optimizacion de la Productividad en Mina

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

The project consisted of putting in place a performance system which helps to optimise or maintain in a consistent manner the productivity of the mine, from storage onwards. The system also enables the analysis of the most significant information arising from the mining operations and other departments involved in the production process. In parallel to this, the project aimed to improve safety in the mine, and lead to an improvement in the working conditions of men and equipment. In order to achieve this, the project centred on: - Developing a relational database that collects discretely, and when operational, automatically, the principal and most significant parameters in the production process. - Monitoring and controlling the various operations in which equipment is involved. - A detailed analysis of the organisation and work methods, utilising continuous improvement techniques, which initially was aimed at the improve of safety, and equipment maintenance. Having completed the project, it can be confirmed that improvements were obtained in all performance areas. In addition, the database and control system controlling the most representative technical, physical and economics barriers of the production system continue to operate, and constitute a very efficient and modern tool in the management of the mining process, which is one of the most competitive within the underground coal mining industry in Spain. (Author)

Energy analysis of a solar advanced refrigeration system; Analisis energetico de un sistema de refrigeracion solar avanzado

Energy Technology Data Exchange (ETDEWEB)

Velazquez Limon, Nicolas [Universidad Autonoma de Baja California (Mexico); Best y Brown, Roberto [Universidad Nacional Autonoma de Mexico, Temixco, Morelos (Mexico)

2000-07-01

In this article is presented a solar refrigeration system that integrates the more recent and important technological advances of the training solar systems (SCS) and of the advanced absorption units. An analysis and evaluation is made of the energy behavior of the absorption system with heat exchanger absorber-generator (GAX), air cooled and assisted by a hybrid power plant natural gas-solar. Given the characteristic of high not-linearity of the resulting system of occupations, the proposed methodology contemplates a calculation sequence for the external currents and an iterative procedure for the internal currents. The unit was designed with a capacity of 10.6 kw (3 tons.) of cooling and uses ammonia-water as working fluid. Giving priority to internal energy integration, an arrangement of the GAX cycle is proposed, that allows 19% of solar contribution at full load, being able to be greater at partial loads. In spite of using as cooling means air at 40 Celsius degrees with a relative humidity of 24%, a COP of 0.86 in the cooling mode was obtained and 1.86 in the heating mode, with an internal energy integration of 1013 kJ/min, 37% more of the energy that is supplied in the generator. The massic flow rates of the GAX cycle were compared with those of a basic cycle, resulting 73% and 62% lower for the circulation rate and for the flow rate, respectively. [Spanish] En este articulo se presenta un sistema de refrigeracion solar que integra los avances tecnologicos mas recientes e importantes de los sistemas de capacitacion solar (SCS) y de las unidades de absorcion avanzadas. Se realiza un analisis y evaluacion del comportamiento energetico del sistema de absorcion con intercambio de calor absorbedor-generador (GAX), enfriado por aire y asistido por una fuente de energia hibrida gas natural-solar. Dada la caracteristica de alta no-linealidad del sistema de ocupaciones resultante, la metodologia propuesta contempla una secuencia de calculo para las corrientes externas

Performance evaluation of the reference system for calibration of IPEN activities

Energy Technology Data Exchange (ETDEWEB)

Martins, Elaine Wirney; Potiens, Maria da Penha A., E-mail: ewmartins@ipen.br, E-mail: mppalbu@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2011-07-01

The formation of good quality image in nuclear medicine services depends on several factors, including the radiopharmaceutical activity, which must be well determined by a specific apparatus, in perfect operating condition, called activimeter. Therefore, the establishment of a quality control program for measuring the radiopharmaceuticals radioactivity before being administered to the patient is crucial to the safe and effective use of the radiopharmaceuticals used in diagnostic and therapeutical procedures. Two activimeters, belonging by the Laboratorio de Calibracao do Instrumentos (LCI) of Instituto de Pesquisas Energeticas e Nucleares (IPEN), were evaluated: the secondary standard system NPL-CRC radionuclide calibrator, manufactured by Southern Scientific, and the work standard system CRC-15BT with traceability to National Institute of Standard and Technology (NIST). A set of standard sources of the radionuclides {sup 1}'3{sup 3}Ba, {sup 57}Co and {sup 137}Cs was used as reference to perform the quality control tests. The precision, accuracy and repeatability tests were in agreement with those established by the CNEN-NE 3.05 Brazilian standard, which recommends the variation limit of up to 10%, 5% and 5% respectively. The results obtained for the reproducibility tests presented a variation always below 1,5%, which means it is within the IEC 61674 international standard recommendation of up to 3%. Activimeters response regarding linearity showed concordance between the measured activities and the theoretical curve for both activimeters. (author)

Cancellation of the energy efficiency program in Peru because of the electrical sector privatization; Cancelacion del programa de eficiencia energetica en Peru por la privatizacion del sector electrico

Energy Technology Data Exchange (ETDEWEB)

Tomecich Cordova, Anibal [Centro de Conservacion de Energia y del Ambiente (CENERGIA) (Peru)

2005-04-15

The evolution of the activities related to the electric efficiency before and after the reforms of the electrical sector in Peru derived from the liberation of the economy is explained. In the first part it is explained as an antecedent the development of one of the most successful campaigns regarding demand management, considering it as a variable and not as a datum of the problem for statistic effects. The results of such campaign demonstrated that a proper management of the variable electricity demand, capital investments can be deferred in the electric infrastructure within the frame of sustainable social development. Afterwards it is explained the new regulatory frame and the principles that prevail for the fixation of the tariffs when the electrical sector evolves from a vertical structure to a horizontal structure. Finally it is mentioned the activities that have been carried out in a latter period to the implantation of the reforms in the sector and some important examples such as the obligation for the electric utilities to reduce their technical and commercial losses. [Spanish] Se explica la evolucion de las actividades relacionadas a la eficiencia energetica antes y despues de las reformas del sector electrico en Peru, derivada de la liberacion de la economia. En la primera parte se explica como antecedente el desarrollo de una de las campanas mas exitosas en el manejo de la demanda, considerandola como una variable y no como un dato del problema para efectos estadisticos. Los resultados de tal campana demostraron que manejando adecuadamente la variable demanda de electricidad, se puede diferir inversiones de capital en la infraestructura electrica dentro del marco de un desarrollo social sostenible. A continuacion se explica el nuevo marco regulatorio y los principios que rigen para la fijacion de las tarifas cuando el sector electrico se transforma de una estructura vertical a una estructura horizontal. Finalmente, se menciona las actividades que se

Contribution to the operating energy planning of hydrothermal power systems; Contribuicao ao planejamento da operacao energetica de sistemas hidrotermicos de potencia

Energy Technology Data Exchange (ETDEWEB)

Carneiro, Adriano Alber de Franca Mendes

1991-08-01

This work treats of the problem of the planning of the energy operation of hydrothermal power systems, gone back to those with predominance of hydraulic generation, as it is the case of the Brazilian system. The work makes an analysis of the problem of the planning of the energy operation of systems hydrothermal leaving of the concepts and nature of this problem. Their inherent difficulties are shown and they come the main approaches in operation in countries with predominance of hydroelectric generation. It still introduces the methodology in energy planning in Brazil being pointed their main limitations. Finally an alternative model for the planning of the energy operation of the system brazilian hydrothermal, based on the made studies is also presented.

Energy efficiency / economic in agroecosystems; Eficiencia energetica/economica em agroecossistemas

Energy Technology Data Exchange (ETDEWEB)

Almeida, Luis Carlos Ferreira de; Bueno, Osmar de Carvalho; Esperancini, Maura Seiko Tsutui [Universidade Estadual Paulista Julio de Mesquita Filho (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas

2010-07-01

The energy and economic evaluation of agroecosystems is important in the sense of appraise as maintainable these can be so much of the point of view energy as economic. The objective of the present paper was to show, starting from a case study, the construction of an indicator of energy/economic efficiency, whose results for four existent systems of corn production in the study area presented indexes that varied between 22.4 and 31.6. Of the reading of those values was possible to evaluate that all of the appraised systems show sustainability of long and short term. The proposed indicator if it shows solid in the agroecosystems appreciation concerning the analysis of your energy/economic sustainability. (author)

Sulle orme di Carnot

CERN Document Server

Carrà, Sergio

2011-01-01

L'energia e le sue trasformazioni ; impieghi e rendimenti dell'energia termica ; l'energia elettromagnetica ; l'energia elettrochimica ; natura delle fonti energetiche ; l'energia nucleare ; disponibilità e impieghi dell'energia ; energetica della biosfera ; energia, risorse e ambiente ; cercasi miracolo disperatamente.

Nuclear Power and Sustainable Development (Spanish Edition); Energia Nucleoelectrica y Desarrollo Sostenible

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-02-15

Any discussion of 21st century energy trends must take into account the global energy imbalance. Roughly 1.6 billion people still lack access to modern energy services, and few aspects of development - whether related to living standards, health care or industrial productivity - can take place without the requisite supply of energy. As we look to the century before us, the growth in energy demand will be substantial, and 'connecting the unconnected' will be a key to progress. Another challenge will be sustainability. How can we meet these growing energy needs without creating negative side effects that could compromise the living environment of future generations? Nuclear power is not a 'fix-all' option. It is a choice that has a place among the mix of solutions, and expectations for the expanding use of nuclear power are rising. In addition to the growth in demand, these expectations are driven by energy security concerns, nuclear power's low greenhouse gas emissions, and the sustained strong performance of nuclear plants. Each country must make its own energy choices; one size does not fit all. But for those countries interested in making nuclear power part of their sustainable development strategies, it is important that the nuclear power option be kept open and accessible [Spanish] En cualquier analisis de las tendencias energeticas del siglo XXI hay que tomar en cuenta el desequilibrio energetico mundial. Aproximadamente 1 600 millones de persona aun no tienen acceso a servicios energeticos modernos, y pocos aspectos del desarrollo - ya se trate de los niveles de vida, la atencion sanitaria o la productividad industrial - pueden conseguirse sin el necesario suministro de energia. Si consideramos el siglo que tenemos por delante, vemos que el crecimiento de la demanda energetica sera sustancial y que una clave del progreso consistira en 'conectar a los que carecen de conexion'. Otro desafio sera la sostenibilidad. Como podemos satisfacer estas necesidades

Generators for Miranda

Energy Technology Data Exchange (ETDEWEB)

Angiolini, G.; Borgna, H.; Garcia, A.; Fernandez, M.; Piriz, H.; Verdu, C. [IMPSA Hydrogenerators (Argentina)

2000-10-01

The three generators at the Miranda hydroelectric power plant on the Araguari river northwest of Belo Horizonte in the state of Minas Gerais began operation in 1998. All the electromechanical equipment for the project was supplied by IMPSA. The generators, which are driven by Francis turbines, are vertical shaft, three-phase, salient-pole synchronous machines with an output of 137 MVA. The generators successfully completed a series of studies and trials before commercial operation began and Companhia Energetica de Minas Gerais (CEMIG) is considering increasing the operation power to 150 MVA. The specification and design of the electrical aspects, stator winding, rotor, bearings, shaft line, generator cooling system, excitation system and monitoring systems are described. Electromagnetic requirements and acceptance testing results are given in two summary tables.

Energy efficiency in a drive system of induction motors; Eficiencia energetica em um sistema de acionamento de motores de inducao

Energy Technology Data Exchange (ETDEWEB)

Vasconcellos, Arnulfo Barroso de; Kawaphara, Mario Kiyoshi; Apolonio, Roberto; Annunciacao, Luiz de; Silva, Thiago Vieira da; Sao Jose, Bernardo Dias [Universidade Federal de Mato Grosso (UFMT), Cuiaba, MT (Brazil)

2010-07-01

Industrial consumers are interested in reducing their monthly expenditure on electricity. Tackling the waste of electrical energy means improving the way you use it, without giving up the comfort and the advantages it provides. Means to reduce consumption, but without compromising safety, quality of product or process or production capacity. In this context, this study presents the results obtained by measurements in a drive system for elevator type pitchers in the laboratory by conventional means and by electronic devices, which simulates a system of operation of a grain transportation industry. We monitored voltages, currents, active power, active power consumption of the system triggered by the conventional method by starting directly and, through microprocessor controls with frequency converter and analyzed the power efficiency obtained with the two processes drive. This study aims at a possible reduction in electricity consumption for active power and active power demand for the automated activation with the frequency inverter. In a broader analysis, conservation of power ends up benefiting society in general, because its effects are felt in different ways. Encourage the reduction or even elimination of new investment to build power plants and power grids, reduce prices of products and services, and ensure availability of electricity supply and service to new consumers. (author)

Studies on the Optimal behavior of Energy Storage in Reservoirs of a Hydroelectric system; Estudios sobre el comportamiento optimo del almacenamiento de energia en embalses de sistema hidroelectrico

Energy Technology Data Exchange (ETDEWEB)

Macedo Faria, Breno; Franco Barbosa, Paulo Sergio [Universidad Estatal de Campinas (Brazil)

2002-09-01

This work aims at studying the results of an optimisation model applied to the Paranaiba river basin, Brazil. This system is made by the junction of three river branches located in a region with a well-defined seasonal hydrological behavior. The ratio between the total energy storage in the system and the active storage for every reservoir is evaluated from the optimal operational results. This relationship allows recognizing systematic patterns on the relative use for every reservoir, when compared to the entire system. The main parameters that define reservoir behavior are identified, with highlights on the position of the power station in the cascade, the relationship between the river flow and the active storage, and the installed capacity of the power station. In addition, the parameter hydrological scenario is also another factor that defines the relative use of the reservoirs. [Spanish] El modelo del presente trabajo tiene como objetivo estudiar los resultados de una optimizacion para el sistema hidroelectrico de la cuenca del rio Paranaiba, Brasil, la cual esta formada por la confluencia de tres rios en una region de distribucion de lluvias bien definidas en terminos hidrologicos. Se analiza la relacion entre la energia total almacenada en el sistema y el volumen util de cada embalse a partir de los resultados operativos optimos. Esta relacion permite identificar resultados sistematicos en lo que se refiere a la utilizacion de cada embalse, en comparacion con el uso del sistema como un todo. Se identifican los principales parametros responsables por el comportamiento de los embalses, destacando la influencia de la posicion de la central hidroelectrica en la cascada, de la relacion caudal/volumen util y de la potencia de central. Ademas, el parametro escenario hidrologico tambien es otro factor determinante en el uso relativo de los embalses.

Importance of the PyMES in the national development and in the project. Qualification and consultancy for the intelligent use of the energy in the micro, small and medium companies; Importancia de las Pymes en el desarrollo nacional y el proyecto. Capacitacion y consultoria para el uso inteligente de la energia en las micros, pequenas y medianas empresas

Energy Technology Data Exchange (ETDEWEB)

Sanchez Diaz, Luis [Presidente del Consejo Directivo Nacional ATPAE, Mexico D.F. (Mexico)

2005-07-01

This document presents the complete structure of the program Qualification and consultancy for the intelligent use of the energy in the micros, small and medium companies. This program offers opportunities to increase the competitiveness of your company. In order to carry it out the Secretaria de Economia with support of the Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica,(ATPAE) destined resources originated from contributors' taxes for the granting of the PyME funds. [Spanish] Este documento presenta la estructura completa del programa Capacitacion y consultoria para el uso inteligente de la energia en las micros, pequenas y medianas empresas, el cual brinda oportunidades para aumentar la competitividad de tu empresa. Para llevarlo acabo la Secretaria de Economia con apoyo de la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica, (ATPAE) destino recursos provenientes de los impuestos de los contribuyentes para el otorgamiento de los apoyos del fondo Pyme.

Importance of the PyMES in the national development and in the project. Qualification and consultancy for the intelligent use of the energy in the micro, small and medium companies; Importancia de las Pymes en el desarrollo nacional y el proyecto. Capacitacion y consultoria para el uso inteligente de la energia en las micros, pequenas y medianas empresas

Energy Technology Data Exchange (ETDEWEB)

Sanchez Diaz, Luis [Presidente del Consejo Directivo Nacional ATPAE, Mexico D.F. (Mexico)

2005-07-01

This document presents the complete structure of the program Qualification and consultancy for the intelligent use of the energy in the micros, small and medium companies. This program offers opportunities to increase the competitiveness of your company. In order to carry it out the Secretaria de Economia with support of the Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica,(ATPAE) destined resources originated from contributors' taxes for the granting of the PyME funds. [Spanish] Este documento presenta la estructura completa del programa Capacitacion y consultoria para el uso inteligente de la energia en las micros, pequenas y medianas empresas, el cual brinda oportunidades para aumentar la competitividad de tu empresa. Para llevarlo acabo la Secretaria de Economia con apoyo de la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica, (ATPAE) destino recursos provenientes de los impuestos de los contribuyentes para el otorgamiento de los apoyos del fondo Pyme.

Energy efficiency in public buildings; Eficiencia energetica em predios publicos

Energy Technology Data Exchange (ETDEWEB)

Kiperstok, Asher; Garcia, Agenor Gomes Pinto; Vianna, Luis Gustavo; Freitas, Daniela; Oliveira, Braulio; Azevedo, Alexandre; Alves, Igor; Fagundes, Vitor Lacerda [Universidade Federal da Bahia (TECLIM/UFBA), Salvador, BA (Brazil). Rede de Tecnologias Limpas

2010-07-01

The implementation process of a energy management system in buildings of the Bahia state administration is presented. Completed a first phase, with a prior knowledge of the characteristics of the energy use in buildings and the implementation of a daily consumption monitoring system (the Vianet), a second phase begins with the definition of consumption targets and mobilization actions of the people, both the whole of the users, and more strongly the 'eco team', group which shall be responsible for the management. This paper makes a theoretical consideration on the use of energy in buildings, showing the room for energy management in addition to the simple exchange by efficient equipment, estimates the reduction obtained by the energy efficiency program of the electric utility with the exchange of light fixtures and air conditioners, shows the targeting process and difficulties found and identifies measures that will be implemented to achieve increasingly efficient patterns of energy use. (author)

Identificación molecular de mutaciones puntuales relacionadas con resistencia a drogas en VIH-1 de pacientes peruanos

Directory of Open Access Journals (Sweden)

Carlos Yabar V

2006-07-01

Full Text Available Objetivo: Identificar mutaciones puntuales relacionadas con resistencia a drogas en VIH-1 de pacientes peruanos. Materiales y metodos: Se seleccionaron 11 muestras de VIH provenientes de sangre total de sujetos con tratamiento antirretroviral (ARV. Posteriormente se realizo la optimizacion de la amplificacion de 337 pb del gen de la transcriptasa reversa (tr y 377 pb de todo el gen de la proteasa (prt. Los productos de PCR fueron secuenciados directamente para el analisis de mutaciones de resistencia. Las secuencias finales fueron analizadas en programas de analisis de mutaciones de la HIV Drug Resistance Database de la Universidad de Stanford. mutaciones de la HIV Drug Resistance Database de la Universidad de Stanford. Resultados: La optimizacion de la concentracion de ADN (2,5 ng / µL asi como la concentracion de magnesio (4 mM fueron factores criticos para la amplificacion de la tr y la prt respectivamente. De otro lado, el analisis de secuencia revelo la presencia de las mutaciones T215Y y la M184V en tr, implicadas en conferir resistencia a zidovudina (AZT y estavudina (D4T asi como a lamivudina (3TC y emtricitabina (FTC respectivamente. En prt se observaron las mutaciones D30N y N88D implicadas en conferir resistencia a nelfinavir (NFV. Es importante senalar que solo tres muestras de VIH-1 presentaron mutaciones de resistencia, las demas mostraron mutaciones compensatorias. Conclusiones: Se demuestra la existencia de mutaciones de resistencia a ARV a nivel de tr y prt de VIH-1 en sujetos peruanos que reciben terapia TARGA. Se requieren de mayores estudios para establecer un perfil de resistencia a ARV en la poblacion peruana.

Overview of PV Wind hybrid system activities in Germany

Energy Technology Data Exchange (ETDEWEB)

Bopp, G.; Gabler, H.; Kiefer, K.; Preiser, K.; Wiemken, E. [Fraunhofer Institute for Solar Energy Systems ISE, Freiburg (Germany)

1997-12-31

Photovoltaic solar generators combined with diesel engines, in some cases additionally with wind energy converters, and battery energy storage are powering isolated mountain lodges, information centers in nature parks, isolated farms or dwellings all over Europe. A total of 300,000 buildings in Europe are estimated to be not connected to the public grid. This represents a major market potential for photovoltaic, as often photovoltaic power generation is less expensive than a connection to the electric utility. The Fraunhofer Institute for Solar Energy Systems ISE has planned, realized and monitored about 30 hybrid remote energy supply systems with PV generators typically around 5 kW for loads typically around 20 kWh per day. More than one hundred years of operational experience accumulated so far, are a sound foundation on which to draw an interim balance over problems solved and technical questions still under development. Room for further technical development is seen in the domain of system reliability and the reduction of operating costs as well as in the optimization of the utilization of the electric energy produced by the PV generator. [Espanol] Para la electrificacion en toda Europa de casas de campo en la montana, centros de informacion, parques naturales, granjas aisladas o conjuntos habitacionales, se estan usando generadores fotovoltaicos combinados con maquinas diesel, en algunos casos adicionalmente con convertidores de energia del viento y baterias para el almacenamiento de energia. Se estima que en Europa un total de 300,000 edificios no estan conectados a la red publica. Esto representa un gran mercado potencial para los sistemas fotovoltaicos, ya que a menudo la generacion fotovoltaica es menos costosa que una conexion a la empresa electrica. El Instituto Fraunhofer para Sistemas de Energia Solar ISE ha planeado, llevado a cabo y monitoreado alrededor de 30 sistemas hibridos remotos de suministro de energia con generadores fotovoltaicos

Overview of PV Wind hybrid system activities in Germany

Energy Technology Data Exchange (ETDEWEB)

Bopp, G; Gabler, H; Kiefer, K; Preiser, K; Wiemken, E [Fraunhofer Institute for Solar Energy Systems ISE, Freiburg (Germany)

1998-12-31

Photovoltaic solar generators combined with diesel engines, in some cases additionally with wind energy converters, and battery energy storage are powering isolated mountain lodges, information centers in nature parks, isolated farms or dwellings all over Europe. A total of 300,000 buildings in Europe are estimated to be not connected to the public grid. This represents a major market potential for photovoltaic, as often photovoltaic power generation is less expensive than a connection to the electric utility. The Fraunhofer Institute for Solar Energy Systems ISE has planned, realized and monitored about 30 hybrid remote energy supply systems with PV generators typically around 5 kW for loads typically around 20 kWh per day. More than one hundred years of operational experience accumulated so far, are a sound foundation on which to draw an interim balance over problems solved and technical questions still under development. Room for further technical development is seen in the domain of system reliability and the reduction of operating costs as well as in the optimization of the utilization of the electric energy produced by the PV generator. [Espanol] Para la electrificacion en toda Europa de casas de campo en la montana, centros de informacion, parques naturales, granjas aisladas o conjuntos habitacionales, se estan usando generadores fotovoltaicos combinados con maquinas diesel, en algunos casos adicionalmente con convertidores de energia del viento y baterias para el almacenamiento de energia. Se estima que en Europa un total de 300,000 edificios no estan conectados a la red publica. Esto representa un gran mercado potencial para los sistemas fotovoltaicos, ya que a menudo la generacion fotovoltaica es menos costosa que una conexion a la empresa electrica. El Instituto Fraunhofer para Sistemas de Energia Solar ISE ha planeado, llevado a cabo y monitoreado alrededor de 30 sistemas hibridos remotos de suministro de energia con generadores fotovoltaicos

Reti d’impresa ambientali e sviluppo eco-sostenibile a livello regionale

Directory of Open Access Journals (Sweden)

Giuseppe Garofalo

2018-05-01

Full Text Available Le reti d’impresa che operano nel campo dell’efficienza energetica e dell’eco-sostenibilità del territorio possono innescare uno sviluppo sostenibile, innovativo e inclusivo e, per questa via, lo sviluppo locale. È questa l’ipotesi che ci si propone di verificare sulla base dei risultati di un’analisi econometrica che mostra i benefici della presenza di reti tra imprese in termini di riduzione dell’intensità energetica, di potenziamento della capacità innovativa e di impatto occupazionale, sempre a livello regionale. The inter-firm networks that operate in the field of energy efficiency and eco-sustainability of local territories can trigger sustainable, innovative and inclusive development. We aim to check this hypothesis through an econometric analysis for Italy at the regional level. Empirical results show a positive impact of green inter-firm networks in terms of reduction of energy intensity, enhancement of innovative capacity, and increase in the employment rates.

Zero energy Tunnel-concept

NARCIS (Netherlands)

Dzhusupova, R.

2012-01-01

Creating a zero energy environment is a hot topic. The developments in this field are based on the concept of the "Trias Energetica": reducing energy consumption, using renewable energy sources, and efficiently using fossil fuels. A zero energy concept can also be applied to road tunnels to improve

Analysis of scientific and technical production of IPEN-CNEN/SP in the period of 1984 to 1988

International Nuclear Information System (INIS)

Sugai, M.

1989-01-01

An analysis of scientific and technical production of Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP in the period of 1984 to 1988 is presented. It includes articles, dissertation, thesis, books, reports and papers presented in scientific meetings or published in the Publicacao IPEN series. (C.M.)

Brazil and the energy integration; O Brasil e a integracao energetica

Energy Technology Data Exchange (ETDEWEB)

Lopez, Lizett P.; Udaeta, Miguel M.; Burani, Geraldo F. [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Eletrotecnica e Energia

2008-07-01

This article is intended to show the interest of Brazil in the materialization of hydroelectric exploitations and the gas integration with other countries in the region, but also show the evolution of the complementarity of electricity with natural gas (NG). The increase in electrical interconnections and the mesh NG with neighbouring countries brings systemic gains, mitigating the risk of not attending to the energy market, and increase the supply of alternatives. The relationship between these two energy is seen by examining the expansion of the Brazilian electrical system. However, plans for expansion achieve greater involvement of NG in the power stations generation, resulting in an uncertain situation, because of the events in Bolivia, a country that supplies of significant volumes of gas to Brazil. (author)

Establishment of a primary standard system for low energy X-rays using a free air ionization chamber; Estabelecimento de um sistema padrao primario para raios-X de energias baixas com uma camara de ionizacao de ar livre

Energy Technology Data Exchange (ETDEWEB)

Silva, Natalia Fiorini da

2016-08-01

In this work a primary standard system was established for low energy X-rays (10 kV to 50 kV), using a free air ionization chamber with concentric cylinders, Victoreen (Model 481-5), at the Calibration Laboratory of Instruments (LCI) of the Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP). For this, a new ionization chamber alignment protocol was developed for the radiation system and a modification on the micrometer housing used for the movement of the internal cylinders was ma de. The results obtained for the stability and characterization tests showed to be within the limits established by the standards IEC 61674 and IEC 60731. The correction factors for photon attenuation in the air, transmission and scattering in the diaphragm, scattering and fluorescence and ion recombination were also determined. These values were compared with those obtained by the German primary standard laboratory, Physikalisch-Technische Bundesanstalt (PTB), showing good agreement. Finally, the absolute values of the quantity air kerma rate for the standard qualities direct beams MWV28 and WMV35 and the attenuated beams WMH28 and WMH35 were determined; the results are in agreement, with a maximum difference of 3,8% with the values obtained using the secondary standard system of LCI. (author)

Characterization and standardization of a thermoluminescent dosimetric system to ultraviolet and laser radiation using CaSO4:Dy

International Nuclear Information System (INIS)

Grossi, Fabio Henrique

2002-01-01

The photo transferred thermoluminescence (PTTL) was used to characterize a dosimetric system to the laser and ultraviolet radiation. Dysprosium activated calcium sulphate samples (CaSO 4 :Dy) used are produced at Instituto de Pesquisas Energeticas e Nucleares (IPEN) and have proved been an excellent dosimetric material for non ionizing radiation. PTTL signal was studied for UV radiation detection in the 220 to 450 nm range and for laser radiation in the 193 to 1.160 nm range. The samples presented more sensibility to the 193, 250, 310 and 337 nm wavelengths and no sensibility to infrared region. The samples presented linear PTTL in function of radiant exposure, excitation gamma dose in the range between 5 and 100 Gy and laser beam diameter between 2 and 6 nm. Another parameters studied were the angular dependence, UV lower exposure limit and PTTL signal optical fading. Spread laser radiation analysis was performed in the Ophthalmologic Department of Universidade Federal de Sao Paulo (UNIFESP) surgical center, showing that samples positioned as far as 4 m from laser source are sensitized to the laser radiation, as well as evaluating the laser exposure received by workers of medical area. A method to send the samples by mail was developed to the studies performed in the UNIFESP. (author)

Development of an irradiation system for a small size continuous run multipurpose gamma irradiator

International Nuclear Information System (INIS)

Calvo, Wilson Aparecido Parejo

2005-01-01

The Radiation Technology Center from Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), Brazil, developed with a revolutionary design and national technology, a small size continuous run and multipurpose industrial gamma irradiator, to be used as a demonstration facility for manufacturers and contract service companies, which need economical and logistical in-house irradiation system alternatives. Also, to be useful for supporting the local scientific community on development of products and process using gamma radiation, assisting the traditional and potential users on process validation, training and qualification of operators and radioprotection officers. The developed technology for this facility consists of continuous tote box transport system, comprising a single concrete vault, where the automated transport system of products inside and outside of the irradiator utilizes a rotate door, integrated with the shielding, avoiding the traditional maze configuration. Covering 76 m 2 of floor area, the irradiator design is product overlap sources and the maximum capacity of cobalt-60 wet sources is 37 P Bq (1 MCi). The performed quantification program of this multipurpose irradiator was based on AAMI/ISO 11137 standard, which recommends the inclusion of the following elements: installation and process quantification. The initial load of the multipurpose irradiator was 3.4 P Bq (92.1 k Ci) with 13 cobalt-60 sources model C-188, supplied by MDS Nordion Ion Technologies - Canada. For irradiator dose optimization, the source distribution was done using the software Cadgamma developed by IPEN-CNEN/SP. The poly-methylmethacrylate (PMMA) dosimeters system, certified by the International Dose Assurance Service (IDAS) of the International Atomic Energy Agency (IAEA) was used for irradiator dose mapping. The economic analysis, performance concerning to dose uniformity and cobalt-60 utilization efficiency were calculated and compared with other commercial gamma

Design of an electronic system with simultaneous registering of pulse amplitude and event time applied to the 4πβ-γ coincidence method

International Nuclear Information System (INIS)

Toledo, Fabio de

2009-01-01

The 4πβ-γ coincidence method for absolute radionuclide activity measurement has been considered for many years as a primary standard in Nuclear Metrology, because of dependence on few observable quantities and high accuracy. The Laboratorio de Metrologia Nuclear (LMN) - Nuclear Metrology Laboratory -, at Instituto de Pesquisas Energeticas e Nucleares (IPEN) - Nuclear and Energy Research Institute -, among its measurement techniques, uses the 4πβ-γ coincidence method. Recently a new technique known as 'software coincidence' has been used, with many advantages over the conventional coincidence methodology. In order to update the methodologies for radionuclide standardizations, the LMN developed a new system based on the software coincidence technique, described in the present work. This system uses the same nuclear set up for beta and gamma detection. The new software coincidence electronics uses a National Instruments (NI) acquisition card connected to a microcomputer and, through a connection panel, to the nuclear detection set up. The card configuration and controlling is accomplished by software using the LabVIEW, a NI proprietary product. This system records into disk files all the amplitudes and occurrence times for beta and gamma detected pulses. A suitable software was developed (the coincidence analysis program) to process the recorded data in order to obtain beta, gamma and coincidence counts and perform calculation of the radioactive source activity. The work also presents and discusses the results obtained with the first version of the coincidence analysis program, as well as perspectives for future works. (author)

Development of an electronic converter with maximum power point tracking for photovoltaic systems applied to rural electrification; Desenvolvimento de conversor eletronico para maxima transferencia de potencia em sistemas fotovoltaicos aplicados a eletrificacao rural

Energy Technology Data Exchange (ETDEWEB)

Machado Neto, Lauro de Vilhena Brandao [Pontificia Universidade Catolica de Minas Gerais (PUC-Minas), Belo Horizonte, MG (Brazil); Cabral, Claudia Valeria Tavora; Oliveira Filho, Delly [Universidade Federal de Vicosa (UFV), MG (Brazil); Diniz, Antonia Sonia Alves Cardoso [Companhia Energetica de Minas Gerais (CEMIG), Belo Horizonte, MG (Brazil); Cortizo, Porfirio Cabaleiro [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil)

2004-07-01

The maximization of the efficiency in the electric energy conversion is essential to the developing of technical and economic viability of photovoltaic solar energy systems. This paper presents the development of an electronic converter with maximum power point tracking for photovoltaic systems applied to rural electrification. The standalone photovoltaic system used is similar to the systems installed by Companhia Energetica de Minas Gerais - CEMIG in the schools of isolated communities, inside the Solar Light Program. Initially were developed test procedures of the equipment used in the system like photovoltaic generators, electronic ballasts, inverters, charge controllers and batteries, covering minimum performance requirements and in compliance with national and international standards, as possible, due to the instrumentation availability. A data acquisition system was assembled to monitoring the photovoltaic system. A simulation of the system was implemented and the aims were to optimize the project and carry out a comparative study with the monitoring results. The converter with maximum power point tracking consists of a direct current converter in the buck configuration and the control algorithm was implemented in a micro controller, being the first results presented here. After finished the prototype, it will be incorporated in the photovoltaic system and will be accomplished a study of the technical and economic viability. The first results of the tests, of the monitoring and of the converter with maximum power point tracking are helping the sustainability of the systems installed by CEMIG, funding the government initiatives in the quality control of equipment and promoting the development of national technology. (author)

Optimization of the radio lanthanides separation device; Optimizacion de dispositivo para separacion de radiolantanidos

Energy Technology Data Exchange (ETDEWEB)

Vera T, A. L.

2009-07-01

At present, cancer is a major cause of mortality in our country, therefore, its prevention, diagnosis and treatment are vital to health systems. The cancer treatment and other diseases, from monoclonal antibodies, peptides, or amino macro aggregates marked with beta particle emitting radionuclides, is a highly promising field. The radioactive lanthanides: Pm, Tb, Ho, and Lu are beta emitters, which possess nuclear and chemical properties, which have shown their feasibility as radioisotopes of radiotherapeutic use. However, these radioisotopes are not available commercially in this connection, the Research Laboratory of Radioactive Materials of the National Institute of Nuclear Research, has developed the methodology of production of these radioisotopes and based on this work is designed, constructed and installed the radio lanthanides separation device for the radioisotopes production routinely. This device is part of the cell, , which has and auxiliary air service, an extraction system and is protected with a 10 cm of lead shielding. The radio lanthanides separation device is manual and easy to handle. The main function of this equipment is the radio lanthanides separation from extractive chromatography through packed columns with a commercial resin (Ln SPS) and coated on the top and bottom by fiberglass. The radio lanthanides separation device comprises a main carrousel where the separation columns and elution containers are mounted. It also has a system of open irradiation vials, carrier samples for columns and glassware. This paper presents a detailed description of the radio lanthanides separation device and its management, which allows the radioisotopes production Pm, Tb, Ho, and Lu from the separation of its parents Nd, Dy, Gd, and Yb respectively. (Author)

Selection of the motor train of vehicles of load and passengers service with energy efficiency; Seleccion del tren motriz de vehiculos del servicio de carga y pasajeros con eficiencia energetica

Energy Technology Data Exchange (ETDEWEB)

Rafael Morales, Mercedes [Instituto Mexicano del Transporte (MExico)

2003-07-01

The companies of motor transport in Mexico are affected in their economy mainly by the low efficiency in the fuel consumption, specially the one dedicated to heavy service. Despite the outpost technology that is becoming available and adopted by the vehicular park to vehicular in relation to the energy efficiency, the cost per transported ton has not diminished in any substantial way. In this paper, a study is presented on the influence that it has within this problem, the selection of the components of the motor train in the fuel consumption and the capacity of ascent of the vehicle in relation to the weight of the transported load. As result of the study was developed in the Mexican Institute of Transport a computer program based on the real tests of performance that a vehicle can be subjected to, taking into consideration the optimum regime of the motor with the minimum fuel consumption. The program helps the carrier to select the most suitable motor train for the vehicle that is intended to acquire considering the operations to which it will be subjected to in a certain service, also evaluates the motor train of the existing vehicles in the vehicular fleet of the transport companies. [Spanish] Las empresas de autotransporte en Mexico se ven afectadas en su economia principalmente por la baja eficiencia en el consumo de combustible, especialmente las destinadas al servicio pesado. No obstante la avanzada tecnologia de que se va disponiendo y adoptando en el parque vehicular con relacion a la eficiencia energetica, el costo por tonelada transportada no ha disminuido de manera importante. En este trabajo, se presenta un estudio sobre la influencia que tiene dentro de esta problematica, la seleccion de los componentes del tren motriz en el consumo de combustible y en la capacidad de ascenso del vehiculo en relacion con el peso de la carga transportada. Como resultado del estudio se desarrollo en el Instituto Mexicano del Transporte un programa de computo basado en

Optimization of fuel reloads for a BWR using the ant colony system; Optimizacion de recargas de combustible para un BWR usando el sistema de colonia de hormigas

Energy Technology Data Exchange (ETDEWEB)

Esquivel E, J. [Universidad Autonoma del Estado de Mexico, Facultad de Ingenieria, Cerro de Coatepec s/n, Ciudad Universitaria, 50110 Toluca, Estado de Mexico (Mexico); Ortiz S, J. J. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)], e-mail: jaime.es.jaime@gmail.com

2009-10-15

In this work some results obtained during the development of optimization systems are presented, which are employees for the fuel reload design in a BWR. The systems use the ant colony optimization technique. As first instance, a system is developed that was adapted at travel salesman problem applied for the 32 state capitals of Mexican Republic. The purpose of this implementation is that a similarity exists with the design of fuel reload, since the two problems are of combinatorial optimization with decision variables that have similarity between both. The system was coupled to simulator SIMULATE-3, obtaining good results when being applied to an operation cycle in equilibrium for reactors of nuclear power plant of Laguna Verde. (Author)

Evolution and results of the energy conservation programs in PEMEX-REFINACION; Evolucion y resultados de los programas de ahorro de energia en PEMEX-REFINACION

Energy Technology Data Exchange (ETDEWEB)

Machado Soberanes, J.A. [PEMEX-REFINACION, Mexico, D. F. (Mexico)

1995-12-31

representa un renglon altamente significativo dentro de sus costos totales de operacion. Dichos costos de energia se han venido reduciendo de porcentajes superiores al 50% en 1990 a 43% en 1993, mediante programas coordinados de acciones e inversiones orientados al uso eficiente de la energia y al control de perdidas. En este trabajo se presenta la resena historica del desarrollo, avance y logros que a la fecha se han obtenido en esta materia en la planta productiva de PEMEX-REFINACION a partir de la intensificacion del programa de conservacion y uso eficiente de la energia en 1990. Como parte sustancial de este trabajo se enlistan las diversas acciones que se han venido aplicando desde el inicio del programa con su respectivo analisis costo-beneficio, para la eliminacion de dispendios energeticos que corresponden fundamentalmente a medidas a corto plazo que requieren de minima inversion y acciones a mediano plazo con inversiones moderadas. Asimismo se presenta el plan de acciones por realizar para la optimizacion en la operacion de sistemas y equipos existentes, con acciones a largo plazo que para su realizacion requieren de inversiones considerables. Los esfuerzos realizados en este sentido en los ultimos 4 anos en las refinerias del sistema, han sido importantes; lo que se ha reflejado en una reduccion del consumo de energeticos promedio de 10,000 barriles de crudo equivalente por dia (BCED), sin embargo, todavia existen grandes areas de oportunidad para alcanzar los niveles de eficiencia energetica y rentabilidad de las refinerias de vanguardia en el mundo, lo que es consistente con el marco conceptual del plan de negocios 1995-2000 estructurado para PEMEX-REFINACION.

Evolution and results of the energy conservation programs in PEMEX-REFINACION; Evolucion y resultados de los programas de ahorro de energia en PEMEX-REFINACION

Energy Technology Data Exchange (ETDEWEB)

Machado Soberanes, J A [PEMEX-REFINACION, Mexico, D. F. (Mexico)

1996-12-31

representa un renglon altamente significativo dentro de sus costos totales de operacion. Dichos costos de energia se han venido reduciendo de porcentajes superiores al 50% en 1990 a 43% en 1993, mediante programas coordinados de acciones e inversiones orientados al uso eficiente de la energia y al control de perdidas. En este trabajo se presenta la resena historica del desarrollo, avance y logros que a la fecha se han obtenido en esta materia en la planta productiva de PEMEX-REFINACION a partir de la intensificacion del programa de conservacion y uso eficiente de la energia en 1990. Como parte sustancial de este trabajo se enlistan las diversas acciones que se han venido aplicando desde el inicio del programa con su respectivo analisis costo-beneficio, para la eliminacion de dispendios energeticos que corresponden fundamentalmente a medidas a corto plazo que requieren de minima inversion y acciones a mediano plazo con inversiones moderadas. Asimismo se presenta el plan de acciones por realizar para la optimizacion en la operacion de sistemas y equipos existentes, con acciones a largo plazo que para su realizacion requieren de inversiones considerables. Los esfuerzos realizados en este sentido en los ultimos 4 anos en las refinerias del sistema, han sido importantes; lo que se ha reflejado en una reduccion del consumo de energeticos promedio de 10,000 barriles de crudo equivalente por dia (BCED), sin embargo, todavia existen grandes areas de oportunidad para alcanzar los niveles de eficiencia energetica y rentabilidad de las refinerias de vanguardia en el mundo, lo que es consistente con el marco conceptual del plan de negocios 1995-2000 estructurado para PEMEX-REFINACION.

Trends in the energy use in the Mexican industrial sector; Tendencias del uso de la energia en el sector industrial mexicano

Energy Technology Data Exchange (ETDEWEB)

Sheinbaum, C. [UNAM, Mexico, D. F. (Mexico); Jauregui, I. [CONAE, Mexico, D. F. (Mexico)

1995-12-31

This paper presents an analysis of the trends of the energy use for the industry in Mexico. For the various industrial branches (mining, construction, chemical, sugar, cement, paper and cellulose and glass) the changes in energy intensity (measured as the use of the energy divided by the aggregated value) and in the participation of the same in the industrial Internal Gross Product are presented. This is developed by means of the analysis of Laspeyress exchange indexes. It is found that in most of the industrial branches a reduction of the energy density has been originated. The reasons for the falling of this indicator are structural and of technological change nature, depending on the industrial branch. Nevertheless the classical analysis of the Laspeyress indexes is not sufficient to explain the changes occurred in the energy intensity in the Mexican industry for the last years. [Espanol] Este articulo presenta un analisis de las tendencias del uso de la energia para la industria en Mexico. Para las diversas ramas industriales (mineria, construccion, quimica, azucar, cemento, papel y celulosa y vidrio) se presentan los cambios en la intensidad energetica (medida como uso de la energia entre valor agregado) y en la participacion de las mismas en el Producto Interno Bruto (PIB) industrial. Esto se desarrolla por medio del analisis de indices de cambio de Laspeyress. Se encuentra que en la mayoria de las ramas industriales hubo una disminucion en la intensidad energetica. Las razones de la caida de este indicador son estructurales y de cambio tecnologico dependiendo de la rama industrial. Sin embargo el analisis clasico de los indices de Laspeyress es insuficiente para explicar los cambios ocurridos en la intensidad energetica de la industria mexicana para los ultimos anos.

Trends in the energy use in the Mexican industrial sector; Tendencias del uso de la energia en el sector industrial mexicano

Energy Technology Data Exchange (ETDEWEB)

Sheinbaum, C [UNAM, Mexico, D. F. (Mexico); Jauregui, I [CONAE, Mexico, D. F. (Mexico)

1996-12-31

This paper presents an analysis of the trends of the energy use for the industry in Mexico. For the various industrial branches (mining, construction, chemical, sugar, cement, paper and cellulose and glass) the changes in energy intensity (measured as the use of the energy divided by the aggregated value) and in the participation of the same in the industrial Internal Gross Product are presented. This is developed by means of the analysis of Laspeyress exchange indexes. It is found that in most of the industrial branches a reduction of the energy density has been originated. The reasons for the falling of this indicator are structural and of technological change nature, depending on the industrial branch. Nevertheless the classical analysis of the Laspeyress indexes is not sufficient to explain the changes occurred in the energy intensity in the Mexican industry for the last years. [Espanol] Este articulo presenta un analisis de las tendencias del uso de la energia para la industria en Mexico. Para las diversas ramas industriales (mineria, construccion, quimica, azucar, cemento, papel y celulosa y vidrio) se presentan los cambios en la intensidad energetica (medida como uso de la energia entre valor agregado) y en la participacion de las mismas en el Producto Interno Bruto (PIB) industrial. Esto se desarrolla por medio del analisis de indices de cambio de Laspeyress. Se encuentra que en la mayoria de las ramas industriales hubo una disminucion en la intensidad energetica. Las razones de la caida de este indicador son estructurales y de cambio tecnologico dependiendo de la rama industrial. Sin embargo el analisis clasico de los indices de Laspeyress es insuficiente para explicar los cambios ocurridos en la intensidad energetica de la industria mexicana para los ultimos anos.

Research activities in the use of energy; Actividades de investigacion en el uso de la energia electrica

Energy Technology Data Exchange (ETDEWEB)

Covarrubias Ramos, Rogelio; Garcia Juarez, Francisco [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1999-12-31

The use of energy is intimately related to the development and is found in the human activities of all types, consequently we could say that to a greater usage it must correspond a greater benefit. This paper carries on a comparative analysis of the Mexico`s energy efficiency versus industrialized countries; this analysis shows that while Mexico indicates a growing tendency, in the industrialized countries the tendency is to the drop, unmistakable sign of a better usage of the energy sources. It also makes evident that promoting the energy efficiency in Mexico will stimulate and regulate the energy conservation at National level, in the same way it is mentioned that an appropriate energy demand Management for the users as well as for the service providers, will diminish the peak demand, the adequate application of the electric rates at the actual conditions and the energy saving and the strategic load growth [Espanol] El uso de la energia esta intimamente relacionado con el desarrollo y se encuentra en las actividades humanas de todo tipo, de tal suerte que podriamos decir que a mayor uso debe corresponder un mayor beneficio. En este documento se realiza un analisis comparativo de la eficiencia energetica en Mexico contra paises industrializados; este analisis muestra que mientras Mexico indica una tendencia creciente, en los paises industrializados la tendencia es a la baja, signo inequivoco de un mejor uso de los energeticos, tambien hace ver que la promocion de la eficiencia energetica en Mexico estimulara y regulara el ahorro de energia a nivel nacional, de igual manera se menciona que una buena administracion de la demanda energetica tanto por los usuarios como los que prestan el servicio, reducira la demanda pico, la adecuacion de las tarifas electricas a las condiciones reales y el ahorro de los energeticos y el crecimiento estrategico de la carga

Research activities in the use of energy; Actividades de investigacion en el uso de la energia electrica

Energy Technology Data Exchange (ETDEWEB)

Covarrubias Ramos, Rogelio; Garcia Juarez, Francisco [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

The use of energy is intimately related to the development and is found in the human activities of all types, consequently we could say that to a greater usage it must correspond a greater benefit. This paper carries on a comparative analysis of the Mexico`s energy efficiency versus industrialized countries; this analysis shows that while Mexico indicates a growing tendency, in the industrialized countries the tendency is to the drop, unmistakable sign of a better usage of the energy sources. It also makes evident that promoting the energy efficiency in Mexico will stimulate and regulate the energy conservation at National level, in the same way it is mentioned that an appropriate energy demand Management for the users as well as for the service providers, will diminish the peak demand, the adequate application of the electric rates at the actual conditions and the energy saving and the strategic load growth [Espanol] El uso de la energia esta intimamente relacionado con el desarrollo y se encuentra en las actividades humanas de todo tipo, de tal suerte que podriamos decir que a mayor uso debe corresponder un mayor beneficio. En este documento se realiza un analisis comparativo de la eficiencia energetica en Mexico contra paises industrializados; este analisis muestra que mientras Mexico indica una tendencia creciente, en los paises industrializados la tendencia es a la baja, signo inequivoco de un mejor uso de los energeticos, tambien hace ver que la promocion de la eficiencia energetica en Mexico estimulara y regulara el ahorro de energia a nivel nacional, de igual manera se menciona que una buena administracion de la demanda energetica tanto por los usuarios como los que prestan el servicio, reducira la demanda pico, la adecuacion de las tarifas electricas a las condiciones reales y el ahorro de los energeticos y el crecimiento estrategico de la carga

PCEE of ATPAE certification program, present and future development; Programa de certificacion PCEE de ATPAE, desarrollo actual y futuro

Energy Technology Data Exchange (ETDEWEB)

Plauchu Lima, Alberto [Plachu Consultores, Morelia, Michoacan (Mexico)

2003-07-01

In response to the challenges raised to the different actors of the power sector and the users of the electric energy for its optimal application, the Association of Technicians and Professionals in Energy Application (ATPAE) incorporated in its commitments the identification of necessities of specialized professional services, the real availability of these and the necessary actions so that the knowledge, experience and formality are congruent with the required level, quality and trustworthiness for the good performance of those programs, by means of the creation, promotion and development of the Certification Program PCEE (Certificated Personal in Energy Efficiency), as a recognition before the society of the technological dominion, experience and performance of professionals specialized in the power application, qualified and evaluated by the same ATPAE. An anthology of the program is presented and a summary of accomplishments and expectations of future development. [Spanish] En respuesta a los retos planteados a los diferentes actores del sector energetico y de los usuarios de la energia para la aplicacion optima de esta, la Asociacion de Tecnicos y Profesionales en Aplicacion Energetica (ATPAE) incorporo en sus compromisos la identificacion de necesidades de servicios profesionales especializados, la disponibilidad real de estos y las acciones necesarias para que el conocimiento, experiencia y formalidad sean congruentes con el nivel, calidad y confiabilidad requeridos para el buen desempeno de esos programas, mediante la creacion, promocion y desarrollo del Programa de Certificacion PCEE (Personal Certificado en Eficiencia Energetica), como un reconocimiento ante la sociedad del dominio tecnologico, experiencia y desempeno de profesionales especializados en el campo de aplicacion energetica, calificados y evaluados por la propia ATPAE. Se presenta una antologia del programa y un resumen de realizaciones y expectativas de desarrollo futuro.

Production of 99Tc generators with automatic elution

International Nuclear Information System (INIS)

Mengatti, J.; Yanagawa, S.T.I.; Mazzarro, E.; Gasiglia, H.T.; Rela, P.R.; Silva, C.P.G. da; Pereira, N.P.S. de.

1983-10-01

The improvements performed on the routine production of sup(99m) Tc-generators at the Instituto de Pesquisas Energeticas e Nucleares-CNEN/SP, are described. The old model generators (manual elution of sup(99m) Tc) were substituted by automatically eluted generators (Vacuum system). The alumina column, elution system and acessories were modified; the elution time was reduced from 60 to 20-30 seconds. The new generators give 80-90% elution yields using six mililiters of sodium chloride 0,9% as sup(99m) Tc eluant instead of the 10 mililiters necessary to eluate the old generators. So, the radioactive concentrations are now 70% higher. The radioactive, radiochemical, chemical and microbiological criteria were examinated for sup(99m) Tc solutions. Like old generators, automatic generators were considered safe for medical purpose. (Author) [pt

Irradiation effects on the gas formation in metals and alloys

International Nuclear Information System (INIS)

Lucki, G.; Sciani, V.

1988-08-01

Gaseous impurities are produced in structural materials and cladding of present fission reactors and of the future fusion reactors. The gases are generated from the following main sources: a) Hydrogen production from the (n, p) nuclear reaction and Helium formation from (n, α) nuclear reaction in the structure of material, in all reactor types. b) Tritium to Helium desintegration in the materials structure and diffusion of plasma fuel, Deuterium and Tritium, of the confinement system the exhaiust system and the breeding blanket fusion reactors. In the present work a review is made emphasyzing the effects of Helium, considered of major influence on the materials embrittlement. Experimental techniques are discussed, as well as, the results obtained in the Radiation damage Div. of the Instituto de Pesquisas Energeticas e Nucleares - CNEN/SP, are analysed. (author) [pt

Reactor instrumentation experience at IPEN-CNEN/SP

International Nuclear Information System (INIS)

Soares, A.J.

1997-01-01

The Instituto de Pesquisas Energeticas e Nucleares (IPEN) in Sao Paulo started in 1977 development of nuclear instrumentation. In 1982 two groups were established, one responsible for maintenance of electronic equipment and the other, the Nuclear Instrumentation Section (NIS), for new projects, such as a light water moderated critical facility (IPEN/MB-0). The NIS had the responsibility to execute all necessary activities to develop the ''nonconventional'' instrumentation systems: control, protection and radiation monitoring for the IPEN/MB-01 facility. After the commissioning of the critical facility the NIS group started the development of instrumentation systems for a power reactor. As a first step an overall review of the quality assurance programme was implemented. In parallel the development of self powered detectors was carried out. (author). 7 figs

Energy management system. Opti-dmaX Control; Sistema de administracion de energia. Control Opti-dmaX

Energy Technology Data Exchange (ETDEWEB)

Automatizacion, Productividad y Calidad S.A. de C.V. Puebla (Mexico)

2005-07-01

The electrical energy is an essential element in the activities of the present world. Optimizing its consumption represents a competitive advantage for the companies, since the operation costs would be reduced as well as the negative impact to the environment. In billing the electrical energy the tariffs consider: the consumption, the demand, the power and the schedule of use for the medium and large companies. With the Opti-dmaX system the necessary information for the correct administration of the electrical energy consumption is obtained from the measurement in the strategic points of the installation. At the same time, the processes and services are controlled, maintaining an efficient power operation that diminishes operative costs. [Spanish] La energia electrica es un elemento indispensable en las actividades del mundo actual, y optimizar su consumo, representa una ventaja competitiva para las empresas, ya que se consigue reducir los costos de operacion y el impacto al ambiente. En la facturacion de la energia electrica las tarifas consideran: el consumo, la demanda, la potencia y el horario de uso para las medianas y grandes empresas. Con el sistema Opti-dmaX se obtiene la informacion necesaria para la correcta administracion del consumo de energia electrica a partir de la medicion en los puntos estrategicos de la instalacion. A su vez, se controlan los procesos y servicios, manteniendo una operacion energetica eficiente que minimiza los costos operativos.

Development and implementation of a new pneumatic transfer system for materials irradiation at IEA-R1 reactor; Desenvolvimento e implementacao de um novo sistema pneumatico de transferencia para irradiacao de materiais no reator IEA-R1

Energy Technology Data Exchange (ETDEWEB)

Fernando, Alberto de Jesus

2011-07-01

Pneumatic Transfer Systems (PTS) are classified as mechanical equipment largely operated all over the world for transport of a huge sort of objects, samples and materials located at nearly terminals or even at separated ones. System applicability is often recognized in many activities, such as medicine (hospital settings, clinical analysis labs), industry (steel, automobiles, mining, chemical, food, construction), trading (gas station, movies, supermarkets, banks, e-commerce) and federal agencies (post services, federal courts, public enterprises). In the nuclear settings, PTS shows also a vast array of applications, being a part of radioisotope production, as well as short-lived radiopharmaceuticals, including 67 Ga, 201 Tl, 18 F and 123 I-ultra pure. Besides, PTS are also used at radioactive waste management plants and research institutes that apply neutron activation analysis (NAA). This work was directed toward the design and operation of a new PTS for the IEA-R1 nuclear research reactor settled at Instituto de Pesquisas Energeticas e Nucleares (IPEN) for NAA application. With this aim, it was calculated the charge of reactor core grid plate and sample transport testing. Neutron flux at irradiating position was determined as 3,70 {+-} 0,26 10{sup 12} n cm{sup -2} s{sup -1}. (author)

International symposium on utilization of accelerators. Book of extended synopses

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

This book presents the extended synopses of papers presented at the International Symposium on Utilization of Accelerators hosted by the Government of Brazil through its Instituto de Pesquisas Energeticas e Nucleares (IPEN). The synopses are presented unedited as they were received from the authors. Abstracts are not available for all of the synopses. Separate analytics were prepared.

International symposium on utilization of accelerators. Book of extended synopses

International Nuclear Information System (INIS)

2001-01-01

This book presents the extended synopses of papers presented at the International Symposium on Utilization of Accelerators hosted by the Government of Brazil through its Instituto de Pesquisas Energeticas e Nucleares (IPEN). The synopses are presented unedited as they were received from the authors. Abstracts are not available for all of the synopses. Separate analytics were prepared

Technology development for producing nickel metallic filters

International Nuclear Information System (INIS)

Hubler, C.H.

1990-01-01

A technology to produce metallic filters by Instituto de Engenharia Nuclear (IEN-Brazilian CNEN) providing the Instituto de Pesquisas Energeticas e Nucleares (IPEN-Brazilian CNEN) in obtaining nickel alloy filters used for filtration process of uranium hexafluoride, was developed. The experiences carried out for producing nickel conical trunk filters from powder metallurgy are related. (M.C.K.)

Energy efficiency and the use of renewable energies, how to estimate how much they mitigate the green house effect gases emissions; Eficiencia energetica y uso de energias renovables, como estimar cuanto mitigan las emisiones de gases efecto invernadoro?

Energy Technology Data Exchange (ETDEWEB)

Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica, A.C. [Mexico (Mexico)

2002-06-01

In the last years much attention has been given to the polluting gas discharges, in special of those that favor the green house effect (GHE), due to the negative sequels that its concentration causes to the atmosphere, particularly as the cause of the increase in the overall temperature of the planet, which has been denominated world-wide climatic change. There are many activities that allow to lessen or to elude the GHE gas emissions, and with the main ones the so-called projects of Energy Efficiency and Renewable Energy (EE/RE) have been structured. In order to carry out a project within the frame of the MDL, it is necessary to evaluate with quality, precision and transparency, the amount of emissions of GHE gases that are reduced or suppressed thanks to their application. For that reason, in our country we tried different methodologies directed to estimate the CO{sub 2} emissions that are attenuated or eliminated by means of the application of EE/RE projects. [Spanish] En los ultimos anos se ha puesto mucha atencion a las emisiones de gases contaminantes, en especial de los que favorecen el efecto invernadero (GEI), debido a las secuelas negativas que su concentracion ocasiona a la atmosfera, particularmente como causante del aumento en la temperatura general del planeta, en lo que se ha denominado cambio climatico mundial. Existen muchas actividades que permiten aminorar o eludir las emisiones de GEI, y con las principales se han estructurado los llamados proyectos de eficiencia energetica y energia renovables (EE/ER). Para llevar a cabo un proyecto dentro del marco del MDL, es necesario evaluar con calidad, precision y transparencia, la cantidad de emisiones de GEI que se reducen o suprimen gracias a su aplicacion. Por ello, en nuestro pais ensayamos diferentes metodologias encaminadas a estimar las emisiones de CO{sub 2} que se atenuan o eliminan mediante la aplicacion de proyectos de EE/ER.

Optimization of a data acquisition and control system for calibration of X rays detectors with usage of computational tools

International Nuclear Information System (INIS)

Rodrigues, Yklys Santos

2013-01-01

The Brazilian standard ABNT ISO/IEC 17025/2005 specifies general requirements for the competence of testing and calibration facilities. One of these requirements states that these facilities must always optimize their processes and thus, uncertainties must be estimated and lowered as much as possible. In order to achieve such goal, the Laboratorio de Calibracao de Instrumentos (LCI), a laboratory responsible for dosimeter calibration at the Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN) have acquired some equipment for the LCI's X-Ray calibration system, such as a rotating filter holder, and it has also been developing software in order to provide the best calibration results with lowest external interferences (from the operator, for instance) to diminish the possibilities of error occurrences. A semi-automated LabVIEW-based calibration software has been developed at LCI and it has been subjected to constant testing and improvements so far. The software is divided in two basic modules: one is responsible for calibration of the monitor chamber with a reference standard dosimeter, while the other is used to perform instruments calibrations using the monitor chamber as reference. Several influence quantities have been analyzed and the proper corrections have been added to the software as multiplicative correction factors. The software is not only able to acquire data from all the equipment used in the laboratory, but also it is able to calculate calibration factors and its uncertainties. A later analysis shows how this system has optimized the whole calibration process, lowering the occupational dose, reducing the mean time of calibration, uncertainties and preventing errors caused by the system's users. (author)

Optimization of roadways support on El Bierzo (Spain); Optimizacion del Sostenimiento de Galerias en el Bierzo

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

The aim of this project, carried out between 1993 and 1996, is based on the research of the possibilities for roadways support optimisation in EL BIERZO coal field, which is the carboniferous coal field in Spain where it is the most widespread the use of rock bolting combined with yielding arches as gates support system. This project has been carried out in the GRUPO ESCANDAL of Antracitas de Gaiztarro, at present integrated in Coto Minero del SIL and it has been focused on BIENHALLADA and PERDIZ layers, with the following tasks: I.- Taking of geomechanical data. II.- Setting up of a support calculation system III.- Validation of the calculation system in real situations. IV.- development of a friendly computer programme that can be used by technicians, without any special knowledge on computers, for the design of roadways support in EL BIERZO. This programme, in a very friendly manner, permits to establish the geometrical characteristics of a gate to be excavated in a certain seam and, once defined the geometry of the gate, this programme is able to select the support to be used, by combining fully grouted bolts, wooden chocks and steel arches. (Author)

Technical-economic evaluation of the utilization of closing resistor in CEMIG extra-high voltage circuit breakers

Energy Technology Data Exchange (ETDEWEB)

Rocha, Angelica C.O.; Pinto, Roberto del Giudice R.; Teixeira, Jose Cleber; Fonseca, Rodrigo Assuncao; F, Junior, Sebastiao V [Companhia Energetica de Minas Gerais (CEMIG), Belo Horizonte, MG (Brazil)

1994-12-31

This paper presents the technical and economic studies performed by CEMIG, Companhia Energetica de Minas Gerais, Brazil, concerning the use of closing resistor in its extra-high voltage (EHV) breakers. The analysis emphasizes the advantages which could be achieved with the elimination of the resistor as far as costs and reliability are concerned. This evaluation was motivated by two 500 kV breaker failures resulting from the breakdown of the closing resistor operation mechanism. These occurrences resulted in operative restriction for CEMIG EHV system. The analysis demanded a review of the capability criteria of silicon carbide (Si C) gap arresters, which are still greatly used in CEMIG EHV System, and of the procedures to be applied when carrying out the transient studies. The investigation resulted in the prompt removal of closing resistors from circuit breakers in CEMIG extra-high voltage system generating an economy of approximately U$ 840,00 and an improvement in safety and system reliability. (author) 13 refs., 4 figs., 1 tab.

The operational and logistic experience on transportation of Brazilian spent fuel to USA

International Nuclear Information System (INIS)

Maiorino, Jose Rubens; Frajndlich, Roberto; Mandlae, Martin; Bensberg, Werner; Renger, August; Grabow, Karsten

2000-01-01

A shipment of 127 spent MTR fuel assemblies was made from IEA-R1 Research Reactor located at the Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), Sao Paulo, Brazil to Savannah River Site Laboratory in the United States. This paper describes the operational and logistic experience on this transportation made by IPEN staff and the Consortium NCS/GNS. (author)

Optimization of the concentration level in the peak-watt cost of photovoltaic concentrator systems; Optimizacion del nivel de concentracion desde el punto de vista economico en instalaciones fotovoltaicas

Energy Technology Data Exchange (ETDEWEB)

Illanes, R.; De la cueva, J. M.; De Francisco, A.; Prieto, E.; De Blas, M. A.

2004-07-01

In this paper, the effect of the geometric concentration level in the peak-watt cost of photovoltaic concentrator systems is analysed. The optimum levels to make minimum cost for every cell technology is determined for the assumption of some prices. It is concluded that low and middle level concentration are the most profitable systems when cells of monocrystalline Silicon are used, being high level concentration systems the most interesting with high efficiency technologies. A reduction in the peak-watt cost between 50% and 70% of the present price of PV flat panels may be possible, although it would be desirable more data available on the price of components. (Author)

Demand-side bidding in Brazil; Leilao de eficiencia energetica no Brasil

Energy Technology Data Exchange (ETDEWEB)

Garcia, Agenor Gomes Pinto

2008-01-15

Since the New Electric Sector Model's conception an energy-efficiency auction, like the ones used to buy new energy, was considered. Recently, the subject has been frequently commented in studies and meetings. This thesis discuss the main issues about its implementation in Brazil and proposes a model for this. The first chapter shows the history and the Electric Sector actual frame, with emphasis in the energy planning, resumed after the 2001 electricity shortage, the structure created for the system expansion and analyses the results of the new energy's auctions until now. The second chapter studies how the energy-efficiency auction can affect agents and consumers and presents the auction theory, which is growing fast in recent years, and how it can be applied to the present case, showing the possible agents' behavior - ESCOs, larger consumers and appliance manufacturers, and its implication on the auction shape. The third chapter shows the past world experience in energy-efficiency selling - the USA DSB (demand-side bidding) and its actual results and an IEA (International Energy Agency) study about this market mechanism of energy-efficiency promotion. 'The DSB works but it's not simple' (Geller, 2006) sums up the main conclusion about DSB - it develops the M and V techniques and the ESCO industry, making energy-efficiency as good as new generation for system's growing. The fourth chapter presents a proposal for the energy-efficiency auction's implementation in Brazil - its opportunity, resources source, regional aspects and the steps to get there. The fifth chapter analyses the M and V 's techniques and shows examples of the four options for projects - the M and V is essential for the auction success and its development, on the other hand, can leverage the energy-efficiency market in Brazil. Finally, the last chapter concludes that the energy-efficiency auction can make a great contribution for energy efficiency and energy planning, but it can't be the only

Comparative analysis of the indexes of electric power density in buildings lighting systems; Analisis comparativo de los indices de densidad de potencia electrica de los sistemas de alumbrado en edificios

Energy Technology Data Exchange (ETDEWEB)

Cruz Hernandez, J.I.; Morillon Galvez, D. [CONAE, Mexico, D. F. (Mexico)

1995-12-31

The national situation of the lighting systems in buildings is presented in order to know its consumption and make comparisons in accordance with the terms of the Electric Power Density that the lighting systems must satisfy, recently published in the norm, NOM 007 ENER-1995 (Energy Efficiency for non Residential Buildings` Lighting Systems). The form of application of the norm to determine the Electric Power Density Indexes in Lighting Buildings (EPDIL) is described, which permitted to know the current situation of the lighting systems, to compare the results internationally and with the ones specified in the proper norm. As a conclusion, there is the need of enhancing the efficiency of the lightning systems, with savings technologies, improve the lightning levels and equalize the energy indexes of the EPDIL with the ones recommended. [Espanol] Se presenta un estudio sobre la situacion nacional de los sistemas de alumbrado en edificios, con el objeto de conocer su consumo y compararlos, de acuerdo a los terminos de densidad de potencia electrica que deben cumplir los sistemas de alumbrado, publicados recientemente en la norma, NOM 007 ENER-1995 (Eficiencia Energetica para los Sistemas de Alumbrado en Edificios no Residenciales). Se describe la forma de aplicar la norma para determinar los indices de densidad de potencia electrica en alumbrado (DPEA) en edificios, lo cual permitio conocer la situacion actual de los sistemas de alumbrado, comparar con los reportados internacionalmente y con los especificados en la propia norma. Como conclusion se tiene la necesidad de eficientizar los sistemas de alumbrado, con tecnologia ahorradora, mejorar los niveles de iluminacion e igualar los indices energeticos de DPEA con los recomendados.

Comparative analysis of the indexes of electric power density in buildings lighting systems; Analisis comparativo de los indices de densidad de potencia electrica de los sistemas de alumbrado en edificios

Energy Technology Data Exchange (ETDEWEB)

Cruz Hernandez, J I; Morillon Galvez, D [CONAE, Mexico, D. F. (Mexico)

1996-12-31

The national situation of the lighting systems in buildings is presented in order to know its consumption and make comparisons in accordance with the terms of the Electric Power Density that the lighting systems must satisfy, recently published in the norm, NOM 007 ENER-1995 (Energy Efficiency for non Residential Buildings` Lighting Systems). The form of application of the norm to determine the Electric Power Density Indexes in Lighting Buildings (EPDIL) is described, which permitted to know the current situation of the lighting systems, to compare the results internationally and with the ones specified in the proper norm. As a conclusion, there is the need of enhancing the efficiency of the lightning systems, with savings technologies, improve the lightning levels and equalize the energy indexes of the EPDIL with the ones recommended. [Espanol] Se presenta un estudio sobre la situacion nacional de los sistemas de alumbrado en edificios, con el objeto de conocer su consumo y compararlos, de acuerdo a los terminos de densidad de potencia electrica que deben cumplir los sistemas de alumbrado, publicados recientemente en la norma, NOM 007 ENER-1995 (Eficiencia Energetica para los Sistemas de Alumbrado en Edificios no Residenciales). Se describe la forma de aplicar la norma para determinar los indices de densidad de potencia electrica en alumbrado (DPEA) en edificios, lo cual permitio conocer la situacion actual de los sistemas de alumbrado, comparar con los reportados internacionalmente y con los especificados en la propia norma. Como conclusion se tiene la necesidad de eficientizar los sistemas de alumbrado, con tecnologia ahorradora, mejorar los niveles de iluminacion e igualar los indices energeticos de DPEA con los recomendados.

IPEN scientific and technical production 1989

International Nuclear Information System (INIS)

1990-01-01

The Instituto de Pesquisas Energeticas e Nucleares - IPEN, Sao Paulo, Brazil, since its foundations in 1956, the main objective of IPEN has been to undertake research and development into peaceful uses of nuclear energy and to train scientific personnel to post-graduate level. This document gathers the literary production of the IPEN researchers received by the IPEN library in 1989. It includes 239 bibliographic references. (author)

Neutronic calculations with transport and diffusion computer codes for light water moderated critical with UO2 enriched at 4,75% as fuel

International Nuclear Information System (INIS)

Sabundjian, G.; Nakata, H.

1983-02-01

The neutronic calculational procedure in a 4,75% w/O enriched UO 2 fueled light water moderated critical assembly was tested, using the transport codes and diffusin code available at the Instituto de Pesquisas Energeticas e Nucleares. The results of the tested codes, LEOPARD, CITHAMMER, LASER, GELS and CITATION, were found to be satisfatory and only a slight advantage is presented by CITHAMMER code. (Author) [pt

Piloto automático para UAV. Optimizacion y Simulacion

OpenAIRE

Vives Caballero, Sergio Jose

2015-01-01

The objective of this project is to adapt an automatic pilot for unmanned aerial vehicles, written in C#, so that it can be used with the flight simulator XPlane, in addition to its test and validation. This way we will obtain a didactic tool to design and validate automatic pilots for unmanned aerial vehicles. Initially the choice of the simulator, aircraft models, programming language, integrated development environment and functions implemented will be justified and some of the existing op...

Multimedia tutorial system to aid the technical training in energy cogeneration; Sistema tutorial multimedio para apoyar la capacitacion tecnica en cogeneracion de energia

Energy Technology Data Exchange (ETDEWEB)

Kemper Valverde, Nicolas; Lara Rosano, Felipe; Guerrero Briseno, Pedro [Laboratorio de Inteligencia Artificial, Instituto de Ingenieria UNAM, Mexico, D. F. (Mexico); Monedero De La Vega, Arturo F. [Seccion Ingenieria Energetica, DEPFI UNAM, Mexico, D. F. (Mexico)

1994-12-31

The incorporation of computer aided teaching technologies increases the efficiency in the transmission and acquisition of knowledge, allowing the handling of large information volumes, the knowledge homogenization among the students, the availability, the massive teaching and the permanent updating of the same. On the other hand, considering that all energy saving policy must be supported in a training and dissemination program of the respective energy technologies an immediate option is the use of computerized systems of teaching-learning. Precisely, in this paper, are presented the fundamental technical aspects for the development of a tutorial expert system, to aid the training in energy cogeneration, trying to integrate in the application, the usage of multimedia tools with the intelligent handling of the teaching-learning process through the inference machine of an expert system. [Espanol] La incorporacion de metodologias de ensenanza auxiliada por computadora incrementa la eficiencia en la transmision y adquisicion del conocimiento, permitiendo la manipulacion de grandes volumenes de informacion, la homogeneizacion del conocimiento en los educandos, la disponibilidad, masificacion y la permanente actualizacion del mismo. Por otro lado, considerando que toda politica de ahorro de energia debe estar soportada en un programa de capacitacion y de divulgacion de las tecnologias energeticas respectivas, una alternativa inmediata es el empleo de sistemas computarizados de ensenanza-aprendizaje. Precisamente, en este trabajo, se presenta los aspectos tecnicos fundamentales del desarrollo de un sistema experto tutorial para apoyar la capacitacion en cogeneracion de energia, tratando de integrar en la aplicacion, el empleo de las herramientas multimedios con el manejo inteligente del proceso de ensenanza-aprendizaje a traves de la maquina de inferencia de un sistema experto.

Demand-side bidding in Brazil; Leilao de eficiencia energetica no Brasil

Energy Technology Data Exchange (ETDEWEB)

Garcia, Agenor Gomes Pinto

2008-01-15

Since the New Electric Sector Model's conception an energy-efficiency auction, like the ones used to buy new energy, was considered. Recently, the subject has been frequently commented in studies and meetings. This thesis discuss the main issues about its implementation in Brazil and proposes a model for this. The first chapter shows the history and the Electric Sector actual frame, with emphasis in the energy planning, resumed after the 2001 electricity shortage, the structure created for the system expansion and analyses the results of the new energy's auctions until now. The second chapter studies how the energy-efficiency auction can affect agents and consumers and presents the auction theory, which is growing fast in recent years, and how it can be applied to the present case, showing the possible agents' behavior - ESCOs, larger consumers and appliance manufacturers, and its implication on the auction shape. The third chapter shows the past world experience in energy-efficiency selling - the USA DSB (demand-side bidding) and its actual results and an IEA (International Energy Agency) study about this market mechanism of energy-efficiency promotion. 'The DSB works but it's not simple' (Geller, 2006) sums up the main conclusion about DSB - it develops the M and V techniques and the ESCO industry, making energy-efficiency as good as new generation for system's growing. The fourth chapter presents a proposal for the energy-efficiency auction's implementation in Brazil - its opportunity, resources source, regional aspects and the steps to get there. The fifth chapter analyses the M and V 's techniques and shows examples of the four options for projects - the M and V is essential for the auction success and its development, on the other hand, can leverage the energy-efficiency market in Brazil. Finally, the last chapter concludes that the energy-efficiency auction can make a great contribution for energy efficiency and

Analysis of the specific consumption of energy and of carbon specific emissions of the mexican Iron and steel industry; Analisis del consumo especifico de energia y de las emisiones especificas de carbono de la industria siderurgica mexicana

Energy Technology Data Exchange (ETDEWEB)

Ozawa, L; Sheinbaum, C [Instituto de Ingenieria de la UNAM, Mexico, D. F. (Mexico)

1999-07-01

From 1970 to 1995, the specific consumption of energy of the Mexican iron and steel industry diminished in 16.2%, and the specific carbon emissions in 21.8%. In order to analyze the factors that favored these diminutions, the specific energy consumption in structural changes and improvements in energy efficiency were segregated; whereas the specific carbon emissions were segregated in structural changes, improvements of energy efficiency, changes in the factors of carbon emissions and in the fuel mixture in the iron and steel industry as well as in the electricity generation. It was observed that the diminution in the specific consumption as well as in the specific carbon emissions were mainly due to technological improvements in the manufacture of the steel: the complete substitution of the open hearth furnaces and a comprehensive penetration of the continuous casting. In spite of these improvements in energy efficiency and to the gradual substitution of coke by natural gas when increasing the production of iron by direct reduction. Though, the emission factor of the electricity was increased due to a greater participation of the fossil plants in 1995 in comparison with 1970. The indicators of energy efficiency of this industry with other countries were compared taking into account their own structure. Finally recommendations are made of measures for energy saving. [Spanish] De 1970 a 1995, el consumo especifico de energia de la industria siderurgica mexicana disminuyo en un 16.2%, y las emisiones especificas de carbono en un 21.8%. Para analizar los factores que favorecieron dichas disminuciones, se desagrego el consumo especifico de energia en cambios estructurales y en mejoras de eficiencia energetica; mientras que las emisiones especificas de carbono se desagregaron en cambios estructurales, mejoras de eficiencia energetica, cambios en los factores de emision de carbono y en la mezcla de combustibles tanto de la industria siderurgica como en la generacion de

The energy crisis: some political considerations; La crisis energetica: algunas consideraciones politicas

Energy Technology Data Exchange (ETDEWEB)

Riechmann, J.

2009-07-01

Trends like global warming and peak oil (the end of the cheap fossil fuel age) embody an enormous potential of natural catastrophe and socio-economic upheaval. Are our affluent societies ready for the forthcoming conflicts around scarcity, when expansionist human systems collide with the biophysical limits of our finite planet? Unfortunately, we cannot exclude a revival of anti-humanist and anti-democratic political movements in XXIst century. With the global socio-ecological crisis as a background, it is worth considering the idea of Hitler as a forerunner. (Author) 34 refs.

Radiological surveillance employed at industrial application in a nuclear research centre

International Nuclear Information System (INIS)

Sanches, M.P.; Sordi, G.M.; Sahyun, A.; Rodrigues, D.L.

1996-01-01

The monitoring and dosimetry systems used at Industrial Application and Engineering Service Department of the Instituto de Pesquisas Energeticas e Nucleares of the Brazilian Nuclear Energy Commission (GE-IPEN-CNEN/SP) are analyzed,in order to verify the compliance with the condition established by the dose system limitation and the basic radiation protection standards. The criteria about the use of individual dosimetry for persons that work in these facilities are established. In case of an external radiation dosimetry, by using film badge method, a level of 200μGy has been assigned, considering the detection significant threshold. For dose in air due to electromagnetic radiation, using TLD dosimetry of CaSO 4 :Dy a quarter year significant threshold is 101μGy. A symbiosis between the workplace monitoring and the individual monitoring became necessary for optimization purpose. (authors). 5 refs., 2 tabs., 1 fig

Sistemi tecnologici innovativi di involucro per il recupero del patrimonio edilizio recente. L'edilizia scolastica nel Comune di Bologna

OpenAIRE

Mazzoli, Cecilia

2015-01-01

La ricerca è volta a presentare un nuovo approccio integrato, a supporto di operatori e progettisti, per la gestione dell’intero processo progettuale di interventi di riqualificazione energetica e architettonica del patrimonio edilizio recente, mediante l’impiego di soluzioni tecnologiche innovative di involucro edilizio. Lo studio richiede necessariamente l’acquisizione di un repertorio selezionato di sistemi costruttivi di involucro, come base di partenza per l’elaborazione di soluzioni ...

Accident analysis in the water loop of the nuclear engineering department of IPEN using the RELAP4 code

International Nuclear Information System (INIS)

Fernandes Filho, T.L.

1980-06-01

A thermal-hydraulic analysis to describe the transient behavior in the water loop of the Nuclear Engineering Department of the Instituto de Pesquisas Energeticas e Nucleares, Sao Paulo, Brazil, was performed. Postulated accidents such as those resulting from (1) loss of coolant, (2) main pump failure and (3) power excursions, were studied. The computer code RELAP4/Mod.3 was employed as the principal tool of analysis. (Author) [pt

Proceedings of the 2. SIPEN: Integration week from IPEN - Brazilian Institute for Energy and Nuclear Researches, CNEN/SP

International Nuclear Information System (INIS)

1994-01-01

The technical-scientific activities of IPEN (Instituto de Pesquisas Energeticas e Nucleares), Brazilian CNEN, has been presented in these proceedings. It includes the following topics: management and logistics, infra-structure and support, application of nuclear techniques, fuel cycle, materials, reactor research, development of products and services, radiation protection and monitoring. Nuclear medicine and application of radiation in biological assays are studied. Environmental impacts and management of radioactive wastes are also presented

Goals of energy efficiency: sectorial projections; Metas de eficiencias energeticas: projecoes setoriais

Energy Technology Data Exchange (ETDEWEB)

Badanhan, Luis Fernando; Souza, Hamilton Moss [Ministerio das Minas e Energia (SPE/MME), Brasilia, DF (Brazil). Secretaria de Planejamento Energetico. Dept. de Desenvolvimento Energetico

2010-07-01

This paper projects annual goals of energy efficiency discriminated by economy sectors, taking as reference the projection of electric power reduction of 10% in the year of 2030, stipulated in the Energy National Plan (ENP 2030). As introduction for the analysis, the paper presents the methodological aspects of energy efficiency projection presently adopted for the planning of Brazilian electric system expansion for long and average terms. For the projection of energy efficiency goals, it was developed an econometric model based on indexes of demand of energy discriminated for each economic sector. From the results, a sensibility analysis was made considering different ratios of Gross National Product growing.

Simplified analytical model for radionuclide transport simulation in the geosphere

International Nuclear Information System (INIS)

Hiromoto, G.

1996-01-01

In order to evaluate postclosure off-site doses from a low-level radioactive waste disposal facilities, an integrated safety assessment methodology has being developed at Instituto de Pesquisas Energeticas e Nucleares. The source-term modelling approach adopted in this system is described and the results obtained in the IAEA NSARS 'The Safety Assessment of Near-Surface Radioactive Waste Disposal Facilities' programme for model intercomparison studies are presented. The radionuclides released from the waste are calculated using a simple first order kinetics model, and the transport, through porous media below the waste is determined by using an analytical solution of the mass transport equation. The methodology and the results obtained in this work are compared with those reported by others participants of the NSARS programme. (author). 4 refs., 4 figs

Tiempo de Respuestas y Experiencia de Usuario Estudio Experimental

Directory of Open Access Journals (Sweden)

Delvis Echeverria

2016-12-01

Full Text Available La investigación está fundamentada por un estudio experimental, enfocado en la evaluación del comportamiento de los usuarios finales interactuando con tiempos de respuestas en aplicaciones reales. Se tomará como base el aporte de los autores Doherty y Thadani, investigadores de IBM relacionado con los tiempos de respuestas, y las investigaciones de Jacob Nielsen. Se llevarán a cabo un test con usuarios finales, y se expondrán optimizaciones a través de del uso de herramientas que contribuirán a mejorar los tiempos de respuestas de las aplicaciones web. Todo esto engloba una primera instancia de un proyecto que se está llevando a cabo en la empresa GeneXus Consulting, pretendiéndose lograr un punto de encuentro entre el rendimiento de las aplicaciones y la experiencia de usuario.

Energy Statistics Manual; Manual de Estadisticas Energeticas

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

Detailed, complete, timely and reliable statistics are essential to monitor the energy situation at a country level as well as at an international level. Energy statistics on supply, trade, stocks, transformation and demand are indeed the basis for any sound energy policy decision. For instance, the market of oil -- which is the largest traded commodity worldwide -- needs to be closely monitored in order for all market players to know at any time what is produced, traded, stocked and consumed and by whom. In view of the role and importance of energy in world development, one would expect that basic energy information to be readily available and reliable. This is not always the case and one can even observe a decline in the quality, coverage and timeliness of energy statistics over the last few years.

Core calculations for the upgrading of the IEA-R1 research reactor

International Nuclear Information System (INIS)

Santos, Adimir dos; Perrotta, Jose A.; Bastos, Jose Luis F.; Yamaguchi, Mitsuo; Umbehaun, Pedro E.

1998-01-01

The IEA-R1 Research Reactor is a multipurpose reactor. It has been used for basic and applied research in the nuclear area, training and radioisotopes production since 1957. In 1995, the Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP) took the decision to modernize and upgrade the power from 2 to 5 MW and increase the operational cycle. This work presents the design requirements and the calculations effectuated to reach this goal. (author)

Development of an irradiation system for a small size continuous run multipurpose gamma irradiator; Desenvolvimento do sistema de irradiacao em um irradiador multiproposito de cobalto-60 tipo compacto

Energy Technology Data Exchange (ETDEWEB)

Calvo, Wilson Aparecido Parejo

2005-07-01

The Radiation Technology Center from Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), Brazil, developed with a revolutionary design and national technology, a small size continuous run and multipurpose industrial gamma irradiator, to be used as a demonstration facility for manufacturers and contract service companies, which need economical and logistical in-house irradiation system alternatives. Also, to be useful for supporting the local scientific community on development of products and process using gamma radiation, assisting the traditional and potential users on process validation, training and qualification of operators and radioprotection officers. The developed technology for this facility consists of continuous tote box transport system, comprising a single concrete vault, where the automated transport system of products inside and outside of the irradiator utilizes a rotate door, integrated with the shielding, avoiding the traditional maze configuration. Covering 76 m{sup 2} of floor area, the irradiator design is product overlap sources and the maximum capacity of cobalt-60 wet sources is 37 P Bq (1 MCi). The performed quantification program of this multipurpose irradiator was based on AAMI/ISO 11137 standard, which recommends the inclusion of the following elements: installation and process quantification. The initial load of the multipurpose irradiator was 3.4 P Bq (92.1 k Ci) with 13 cobalt-60 sources model C-188, supplied by MDS Nordion Ion Technologies - Canada. For irradiator dose optimization, the source distribution was done using the software Cadgamma developed by IPEN-CNEN/SP. The poly-methylmethacrylate (PMMA) dosimeters system, certified by the International Dose Assurance Service (IDAS) of the International Atomic Energy Agency (IAEA) was used for irradiator dose mapping. The economic analysis, performance concerning to dose uniformity and cobalt-60 utilization efficiency were calculated and compared with other commercial

Boehringer Ingelheim Promeco contemplates the benefits of cogeneration in its new plant; Boehringer Ingelheim Promeco contempla beneficios de la cogeneracion para su nueva planta

Energy Technology Data Exchange (ETDEWEB)

Ruiz Esparza, R. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Khouri Solis, A. [Boehringer Ingelheim Promeco, Mexico, D. F. (Mexico)

1997-12-31

This paper presents the results of the feasibility study performed in BOEHRINGER INGELHEIM PROMECO to determine the benefits that a cogeneration system could render in satisfying the energy demand of its plant currently being expanded. The results showed that in accordance with the operation mode of the already expanded plant, the highest benefits could be obtained of a cogeneration system with a capacity of 1,600 Kw that would partially satisfy the thermal and electrical demands of BOEHRINGER INGELHEIM PROMECO. [Espanol] El presente articulo presenta los resultados de factibilidad que se realizo en Boehringer Ingelheim Promeco para determinar los beneficios que podria rendir un sistema de cogeneracion al satisfacer las demandas energeticas de su planta actualmente en ampliacion. Los resultados mostraron que de acuerdo al modo de operacion de la planta ya ampliada, los beneficios mas altos se obtendrian de un sistema de cogeneracion con capacidad de 1,600 kW que satisfaria parcialmente las demandas termicas y electricas de Boehringer Ingelheim Promeco.

Investigation of radiological emergencies by the IPEN-CNEN/SP during the years 2001 to 2010

International Nuclear Information System (INIS)

Suzuki, Fabio Fumio; Mitake, Malvina Boni

2011-01-01

The Brazilian National Nuclear Energy Commission maintain, in each of its unities, a technical team for investigation and initial response to radiological and nuclear emergency situations which can occur outside of its installations. At the Sao Paulo state, Brazil, that task is accomplished by the Radioprotection Management (GRP) of the Instituto de Pesquisas Energeticas e Nucleares, IPEN-CNEN/SP, Brazil. This paper shows the results obtained by the GRP, analysing which entities action the system, the nature of the event, the involved type of radiation source and the geographical distribution of occurrences in the state. During the period between 2001 and 2010, the GRP attended to 98 notifications, and the entity which the most action the system was the Fire Department. The radionuclide of most incidence was the Am-241, mainly because of radioactive lightning-arrester, followed of radionuclides used in nuclear medicine such as Mo-99/Tc-99m and I-131

Investigation of radiological emergencies by the IPEN-CNEN/SP during the years 2001 to 2010; Averiguacoes de emergencias radiologicas pelo IPEN-CNEN/SP nos anos de 2001 a 2010

Energy Technology Data Exchange (ETDEWEB)

Suzuki, Fabio Fumio; Mitake, Malvina Boni, E-mail: ffsuzuki@ipen.b, E-mail: mbmitake@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2011-10-26

The Brazilian National Nuclear Energy Commission maintain, in each of its unities, a technical team for investigation and initial response to radiological and nuclear emergency situations which can occur outside of its installations. At the Sao Paulo state, Brazil, that task is accomplished by the Radioprotection Management (GRP) of the Instituto de Pesquisas Energeticas e Nucleares, IPEN-CNEN/SP, Brazil. This paper shows the results obtained by the GRP, analysing which entities action the system, the nature of the event, the involved type of radiation source and the geographical distribution of occurrences in the state. During the period between 2001 and 2010, the GRP attended to 98 notifications, and the entity which the most action the system was the Fire Department. The radionuclide of most incidence was the Am-241, mainly because of radioactive lightning-arrester, followed of radionuclides used in nuclear medicine such as Mo-99/Tc-99m and I-131

Boehringer Ingelheim Promeco contemplates the benefits of cogeneration in its new plant; Boehringer Ingelheim Promeco contempla beneficios de la cogeneracion para su nueva planta

Energy Technology Data Exchange (ETDEWEB)

Ruiz Esparza, R [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Khouri Solis, A [Boehringer Ingelheim Promeco, Mexico, D. F. (Mexico)

1998-12-31

This paper presents the results of the feasibility study performed in BOEHRINGER INGELHEIM PROMECO to determine the benefits that a cogeneration system could render in satisfying the energy demand of its plant currently being expanded. The results showed that in accordance with the operation mode of the already expanded plant, the highest benefits could be obtained of a cogeneration system with a capacity of 1,600 Kw that would partially satisfy the thermal and electrical demands of BOEHRINGER INGELHEIM PROMECO. [Espanol] El presente articulo presenta los resultados de factibilidad que se realizo en Boehringer Ingelheim Promeco para determinar los beneficios que podria rendir un sistema de cogeneracion al satisfacer las demandas energeticas de su planta actualmente en ampliacion. Los resultados mostraron que de acuerdo al modo de operacion de la planta ya ampliada, los beneficios mas altos se obtendrian de un sistema de cogeneracion con capacidad de 1,600 kW que satisfaria parcialmente las demandas termicas y electricas de Boehringer Ingelheim Promeco.

Why are energy reforms a failure?; ¿Por que fracasan las reformas energeticas?

Energy Technology Data Exchange (ETDEWEB)

Garcia Breva, J.

2013-07-01

It has been demonstrated that if the renewable energies are stopped the problems will grow and that with more renewable the price of energy is reduced. An effective energy reform should begin by recognizing the impacts of the crisis on the electric power system in order to decide on profound changes in the energy mix, the regulated costs and the setting of electricity prices, to make energy saving a top priority and to promote more competitive, consumer-friendly energy markets. (Author)

Procedure to determine the convenience of installing a co-generation system; Procedimiento para determinar la conveniencia de instalar un sistema de cogeneracion

Energy Technology Data Exchange (ETDEWEB)

Colin Castellanos, Carlos; Acosta Torres, Aracely [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1993-12-31

In this article a methodology for the selection of the co-generation system better adapted to the energy needs of an industry is presented, covering the following schemes: a) Satisfy the thermal demand and deliver to the net the excess electricity generated. b) Reduce the functioning level of the machine and produce electricity in accordance with the internal demand. The thermal demand will be satisfied, for instance, integrating a boiler in the cycle. c) Satisfy the electric demand and utilize only in part the available heat. d) Or else, reduce the operation level of the machine and produce only the necessary thermal energy, taking from the net the electric energy needed to cover the total demand. [Espanol] En este articulo se presenta una metodologia para la seleccion del sistema de cogeneracion que mejor se adapte a las necesidades energeticas de una industria, cubriendo los siguientes esquemas: a) Satisfacer la demanda termica y ceder a la red el exceso de energia electrica generada. b) Reducir el nivel de funcionamiento de la maquina y producir electricidad de acuerdo a la demanda interna. La demanda termica se cubrira, por ejemplo, integrando una caldera al ciclo. c) Satisfacer la demanda electrica y, utilizar solo en parte el calor disponible. d) O bien, reducir el nivel de operacion de la maquina y solo producir la energia termica necesaria, tomando de la red la energia electrica para cubrir la demanda total.

Procedure to determine the convenience of installing a co-generation system; Procedimiento para determinar la conveniencia de instalar un sistema de cogeneracion

Energy Technology Data Exchange (ETDEWEB)

Colin Castellanos, Carlos; Acosta Torres, Aracely [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1992-12-31

In this article a methodology for the selection of the co-generation system better adapted to the energy needs of an industry is presented, covering the following schemes: a) Satisfy the thermal demand and deliver to the net the excess electricity generated. b) Reduce the functioning level of the machine and produce electricity in accordance with the internal demand. The thermal demand will be satisfied, for instance, integrating a boiler in the cycle. c) Satisfy the electric demand and utilize only in part the available heat. d) Or else, reduce the operation level of the machine and produce only the necessary thermal energy, taking from the net the electric energy needed to cover the total demand. [Espanol] En este articulo se presenta una metodologia para la seleccion del sistema de cogeneracion que mejor se adapte a las necesidades energeticas de una industria, cubriendo los siguientes esquemas: a) Satisfacer la demanda termica y ceder a la red el exceso de energia electrica generada. b) Reducir el nivel de funcionamiento de la maquina y producir electricidad de acuerdo a la demanda interna. La demanda termica se cubrira, por ejemplo, integrando una caldera al ciclo. c) Satisfacer la demanda electrica y, utilizar solo en parte el calor disponible. d) O bien, reducir el nivel de operacion de la maquina y solo producir la energia termica necesaria, tomando de la red la energia electrica para cubrir la demanda total.

Evaluation of a special pencil ionization chamber by the Monte Carlo method

International Nuclear Information System (INIS)

Mendonca, Dalila; Neves, Lucio P.; Perini, Ana P.

2015-01-01

A special pencil type ionization chamber, developed at the Instituto de Pesquisas Energeticas e Nucleares, was characterized by means of Monte Carlo simulation to determine the influence of its components on its response. The main differences between this ionization chamber and commercial ionization chambers are related to its configuration and constituent materials. The simulations were made employing the MCNP-4C Monte Carlo code. The highest influence was obtained for the body of PMMA: 7.0%. (author)

Electrification of residences under transmission lines; Eletrificacao de moradias situadas sob linhas de transmissao

Energy Technology Data Exchange (ETDEWEB)

Sarmento, Joaquim Deodoro de Souza; Gomes, Marcio Rosa Renno; Sampaio, Humberto Tadeu Torres; Alvarenga Filho, Omar de; Oliveira, Douglas Braga Ferraz; Dinardi, Donaldo; Brito, Jose Milton Costa; Goncalves, Jose de Arimathea [Companhia Energetica de Minas Gerais (CEMIG), Belo Horizonte, (Brazil)

2000-07-01

This paper reports the efforts of the CEMIG - Companhia Energetica de Minas Gerais, Brazil, of handling the problem of residences placed mostly at the urban areas of the Belo Horizonte metropolitan area. The preferred locals have been chosen with localization oriented to daily displacements of the population, for example the Vila Santa Rita de Cassia, Vila Mangueiras, Vila Paraiso, Vila Morro das Pedras, Vila Goiania, Vila Antena and the Vila Novo Santa Efigenia, all placed in Belo Horizonte.

Nissan Mexicana. First place in national prize of electrical energy saving 1998; Nissan Mexicana. Primer lugar en premio nacional de ahorro de energia electrica 1998

Energy Technology Data Exchange (ETDEWEB)

Gonzalez S, Enrique [Nissan Mexicana, S.A. de C.V., Planta Civac, Cuernavaca, Mor. (Mexico)

1999-07-01

For Plant CIVAC of Nissan Mexicana, the energy saving began in the year of 1990. From then, different programs have been developed using different strategies for energy saving until arriving at the Benchmarking with other Plants of Japan, which represents a new challenge, since it opened up an area of opportunity of saving in processes that generally were known in detail as far as to its main function (to make vehicles with quality, cost and opportunity of delivery), but the parameter of energy consumption of by unit and its benefits in relation to the cost was unknown. This was endorsed by the high Direction and began with the optimization of training for the operation of each equipment with the involvement of the user (Production), the engineering area (that establishes the process) and the maintenance area. We designed a general program where the basic activities were included, such as the general and special activities. Each one of them fulfilled its objective, but the special activities took us to the optimization of the processes, finding excess of energy in the design conditions. [Spanish] Para Planta CIVAC de Nissan Mexicana, el ahorro de energia se inicio en el ano de 1990. A partir de entonces se han desarrollado programas de ahorro de energia usando estrategias diferentes hasta llegar al Benchmarking con otras Plantas de Japon, el cual representa un reto nuevo, ya que puso al descubierto una area de oportunidad de ahorro en los procesos que por lo general se conocian a detalle en cuanto a la funcion principal (hacer vehiculos con calidad, costo y oportunidad de entrega), pero se desconocia el parametro de consumo de energia por unidad y sus beneficios en relacion con el costo. Esto fue avalado por la alta Direccion y se inicio con la capacitacion de la optimizacion de la operacion de cada equipo y se involucro al usuario (Produccion), al area de ingenieria (que establece el proceso) y al area de mantenimiento. Elaboramos un programa general donde se

Energy efficiency of physic nut agroecosystems: comparative between the dried and irrigated system; Eficiencia energetica do agroecossistema pinhao-manso: comparativo entre os sistemas de cultivo de sequeiro e irrigado

Energy Technology Data Exchange (ETDEWEB)

Frigo, Michelle Sato [Universidade Federal de Mato Grosso do Sul (CPCS/UFMS), Chapadao do Sul, MS (Brazil)], E-mail: msfrigo@nin.ufms.br; Bueno, Osmar de Carvalho; Esperancini, Maura Seiko Tsuitsui [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Dept. de Gestao e Tecnologia Agroindustrial; Frigo, Elisandro Pires [Universidade do Oeste Paulista (CCET/UNIOESTE), Cascavel, PR (Brazil). Centro de Ciencias Exatas e Tecnologicas; Klar, Antonio Evaldo [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Dept. de Engenharia Rural

2009-07-01

The physic nut have been a major object of study oil seeds to produce biofuel, but their productive characteristics and the energy expenditure for their production are largely unknown to national both and international conditions. The purpose of this study was to evaluate the efficiency of the physic nut agroecosystem in two different production systems: irrigated and dried. The plantations areas were selected of the company NNE Minas Agro Florestal Ltda. of Janauba/MG. The preparation of the study began with the restoration of the route through the technical oral report provided by the company. Ten operations were identified in the irrigated system and six operations in the dried system. The methodology adopted was based on literature review. The energy balance was 2,141.66 MJ. ha{sup -1} for the irrigation system and 319.30 MJ. ha{sup -1} for the dried. The energy efficiency index for the irrigation system was 2.77 and was not possible to calculate the dried system because this indicator does not use fossil sources. It was concluded that in both systems were used larger amounts of energy to produce than the energy obtained by the final product. (author)

Proceedings of the 24. National seminar on the rational use of energy and exposition of equipment and services and 7. Binational seminar on energy saving [Selected Papers]; 24. Seminario nacional sobre el uso racional de energia y exposicion de equipos y servicios y 7. Seminario binacional de ahorro de energia. Memoria Tecnica. [Ponencias seleccionadas

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This document contains the technical briefings of the 24. National Seminar on the rational use of energy, and exhibition of the equipment and services and the 7. Binational seminar on energy saving, organized by the Asociacion de Profesionistas y Tecnicos en Aplicacion Energetica (ATPAE), in Ciudad Juarez, Chihuahua, Mexico, from November 9 to 11, 2005. This seminar dealt with subjects such as: electrical energy saving, energy distribution, solar energy, energy saving in compressed air, biomass, administration and control of the demand of the electrical energy, bioclimatic architecture, use of the compressed natural gas, renewable energy, co-generation, qualification and consultancy for the intelligent use of the energy in PyMES. [Spanish] Este documento contiene la memoria tecnica del 24 Seminario Nacional sobre el uso racional de energia, y exposicion de los equipos y servicios y el 7 Seminario binacional de ahorro de energia, organizado por la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), en Ciudad Juarez, Chihuahua, Mexico, del 9 al 11 de noviembre del 2005. Este seminario trato temas tales como: ahorro de energia electrica, distribucion de la energia, energia solar, ahorro de energia en aire comprimido, biomasa, administracion y control de la demanda de la energia electrica, arquitectura bioclimatica, uso del gas natural comprimido, energia renovable, cogeneracion, capacitacion y consultoria para el uso inteligente de la energia en las Pymes.

Concepção e avaliação de concentradores solares do tipo disco e lente de fresnel para dessalinização de água

OpenAIRE

Prado, Gustavo Otero

2015-01-01

O Sol e a principal fonte de energia da Terra. Sua capacidade energetica pode ser considerada inesgotavel, nao produz residuos e possui alocacao adaptavel. Tambem de forma abundante, a agua salgada e disponibilizada no planeta cobrindo a maior parte da superficie terrestre. No entanto, hoje, mais de um bilhao de pessoas em todo o mundo nao tem acesso a agua limpa. Neste cenario, a obtencao de agua potavel pelo processamento de aguas salgadas torna-se fundamental. Logo, esse trabalho teve c...

IPEN scientific and technical production 1987

International Nuclear Information System (INIS)

1988-01-01

The Instituto de Pesquisas Energeticas e Nucleares - IPEN (Energy Research Institute), Sao Paulo, Brazil, was founded in 1956, Since its foundation, the main objectives of IPEN has been to undertake research and development into peaceful uses of nuclear energy and to train scientific personnel to post-graduate level. This document gathers the literary production of the IPEN research in 1987. It includes 131 reference, classified by type of publications: IPEN Publications-26, journal articles-17, thesis-81, Congress papers-81. (author)

Life-cycle optimization model for distributed generation in buildings

Science.gov (United States)

Safaei, Amir

principal objetivo desta tese de doutoramento foi desenvolver um modelo para otimizar o desenho e operacao de sistemas de GD para o setor da construcao de edificios comerciais em Portugal, considerando os respetivos Impactes de Ciclo de Vida (IAVC) e Custos de Ciclo de Vida (CCV), de modo a satisfazer as necessidades energeticas do edificio. Tres tipos de tecnologias de cogeracao (Micro-Turbinas, Motores de combustao interna, e Celulas combustiveis de Oxido solido), e dois tipos de tecnologias de energia solar, solar termica e fotovoltaica, constituem os sistemas de GD que sao acoplados aos sistemas convencionais. Foi desenvolvido um modelo de CV, tendo em conta todos os impactes relacionados com a construcao e operacao dos sistemas de energia, bem como os processos a montante relacionados com a producao do GN. Em particular, o mix de GN consumido em Portugal em 2011 foi identificado (60% da Nigeria, 40% da Argelia) e os impactes relativos a cada uma das vias de abastecimento foram avaliados separadamente para quatro categorias de impacte ambiental: Consumo de Energia Primaria (CEP), Gases com Efeito de Estufa (GEE), acidificacao, e eutrofizacao. Devido a importancia das emissoes de GEE na formulacao de politicas, foi tambem realizada uma analise de incerteza as emissoes de GEE do GN fornecido a Portugal. Foi desenvolvido um modelo matematico, em linguagem de Programacao General Algebraic Modeling System (GAMS), que utiliza os resultados da ACV dos sistemas de energia e as suas implicacoes economicas para minimizar o CCV e IACV ao longo de um horizonte de planeamento definido pelo decisor. Foram derivadas fronteiras otimas de Pareto, representando as relacoes entre o tipo de IACV (CEP, GEE, acidificacao, eutrofizacao) e CCV decorrentes da satisfacao das necessidades energeticas do edificio. Para aumentar a robustez do modelo, dada a incerteza dos precos dos combustiveis (GN e eletricidade), foi desenvolvido um modelo de custos robusto para os sistemas de GD, que e menos

Radiation protection of patients in diagnostic radiology: implementation of a management system optimization; Proteccion radiologica de pacientes en radiodiagnostico: implantacion de un sistema de gestion de la optimizacion

Energy Technology Data Exchange (ETDEWEB)

Corpas Rivera, L.; Devesa Pardo, F. J.; Gamez Jimenez, J. L.; Vallejo Carrascal, C.; Garcia de Diego, A. A.; Amador Vela-Hidalgo, J. J.

2011-07-01

The enforcement of quality in diagnostic radiology (Royal Decree 1976/1999 laying down the criteria for quality in diagnostic radiology and Royal Decree 815/2001 to justify the use of ionizing radiations for medical exposure, etc.) and recommendations and European regulations on the matter, is done by carrying out the optimization of the doses received, based on image quality in a continuous process of monitoring of such dose from the dose reference Values ??(VRD ) that the system has allowed to establish for each technique.

Optimization of operation cycles in BWRs using neural networks; Optimizacion de ciclos de operacion en BWRs usando redes neuronales

Energy Technology Data Exchange (ETDEWEB)

Ortiz S, J. J.; Castillo, A. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Alejandro P, D., E-mail: juanjose.ortiz@inin.gob.mx [Universidad de Granada, ETS de Ingenierias, Informatica y de Telecomunicacion, C/Daniel Saucedo Aranda s/n, 18071 Granada (Spain)

2011-11-15

The first results of a system for the optimization of operation cycles in boiling water reactors by means of a multi state recurrent neural network are present in this work. The neural network finds the best combination of fuel cells; fuel reloads and control bars patterns previously designed, according to an energy function that qualifies the performance of the three partial solutions for the solution of the whole problem. The partial solutions are designed by means of optimization systems non couple among them and that can use any optimization technique. The phase of the fuel axial design is not made and the size of the axial areas is fixed during the optimization process. The methodology was applied to design a balance cycle of 18 months for the reactors of the nuclear power station of Laguna Verde. The results show that is possible to find combinations of partial solutions that in set represent good solutions to the complete design problem of an operation cycle of a nuclear reactor. The results are compared with others obtained previously by other techniques. This system was developed in platform Li nux and programmed in Fortran 95 taking advantage of the 8 nuclei of a work station Dell Precision T7400. (Author)

Application of a tandem ionization chamber in a quality control program of X-ray beams, radiotherapy level

International Nuclear Information System (INIS)

Yoshizumi, Maira T.; Caldas, Linda V.E.

2008-01-01

A tandem ionization chamber, developed at the Instituto de Pesquisas Energeticas e Nucleares (IPEN), for X radiation beams, radiotherapy level, was applied into a quality control program of the Calibration Laboratory of IPEN. This ionization chamber is composed by two ionization chambers, with a volume of 0.6 cm 3 each one. Its inner plane-parallel electrodes and guard rings are made of different materials: one is made of aluminum and the other is made of graphite. Because of this difference in materials, the ionization chamber forms a tandem system. The relative response of the calibration factors of both sides of the chamber allows an easy verification of the X-ray beam qualities stability. The ionization chamber was submitted to some tests to verify the stability of its response: leakage current before and after exposure, repeatability and reproducibility. The performance of the ionization chamber was satisfactory. (author)

Optimization of a data acquisition and control system for calibration of X rays detectors with usage of computational tools; Otimizacao de um sistema de controle e aquisicao de dados para calibracao de medidores de radiacao X com utilizacao de ferramentas computacionais

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, Yklys Santos

2013-07-01

The Brazilian standard ABNT ISO/IEC 17025/2005 specifies general requirements for the competence of testing and calibration facilities. One of these requirements states that these facilities must always optimize their processes and thus, uncertainties must be estimated and lowered as much as possible. In order to achieve such goal, the Laboratorio de Calibracao de Instrumentos (LCI), a laboratory responsible for dosimeter calibration at the Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN) have acquired some equipment for the LCI's X-Ray calibration system, such as a rotating filter holder, and it has also been developing software in order to provide the best calibration results with lowest external interferences (from the operator, for instance) to diminish the possibilities of error occurrences. A semi-automated LabVIEW-based calibration software has been developed at LCI and it has been subjected to constant testing and improvements so far. The software is divided in two basic modules: one is responsible for calibration of the monitor chamber with a reference standard dosimeter, while the other is used to perform instruments calibrations using the monitor chamber as reference. Several influence quantities have been analyzed and the proper corrections have been added to the software as multiplicative correction factors. The software is not only able to acquire data from all the equipment used in the laboratory, but also it is able to calculate calibration factors and its uncertainties. A later analysis shows how this system has optimized the whole calibration process, lowering the occupational dose, reducing the mean time of calibration, uncertainties and preventing errors caused by the system's users. (author)

Energy efficiency in boilers; Eficiencia energetica em caldeiras

Energy Technology Data Exchange (ETDEWEB)

Ponte, Ricardo Silva The [Universidade Federal do Ceara (UFCE), Fortaleza, CE (Brazil). Dept. de Engenharia Eletrica], email: ricthe@dee.ufc.br; Barbosa, Marcos Antonio Pinheiro; Rufino, Maria da Gracas [Universidade de Fortaleza (UNIFOR), CE (Brazil). Dept. de Engenharia Eletrica], emails: marcos_apb@unifor.br, gsrufino@unifor.br

2010-07-01

The boiler is vapor generator equipment that has been widely used in industrial milieu as in electric energy generation in thermoelectric plants. Since their first conception, the boilers have been changed in order to provide security and energetic efficiency. They can present high losses of energy if they don't be operated according to some criteria. A considerable part of boilers operation cost include fuel expenses. So, the adoption of effective steps in order to reduce fuel consumption is important to industry economy, besides it brings environmental benefits through the reduction of pollution liberation. The present article has the objective of emphasizing the effective steps for the economy of energy in boilers, such as, the regulation of combustion; the control of soot and incrustations; the installation of economizers, air heaters and super heaters; the reduction in purges and reintroduction of condensed steam. (author)

Energetic efficiency and innovation; Eficiencia energetica e inovacao

Energy Technology Data Exchange (ETDEWEB)

Aragao Neto, Raymundo Moniz de [Empresa de Pesquisa Energetica (EPE), Rio de Janeiro, RJ (Brazil)], e-mail: raymundo.aragao@epe.gov.br

2008-07-01

The article presents the role of energy efficiency as facilitator of innovation associated processes. Several aspects are presented, demonstrating that actions oriented to the increase of energy efficiency in end use bring, directly, the necessity of new practices and technologies, innovative at least in a specific context. (author)

CHP: Combined Heat and Power: a vision of energy efficiency; Cogeracao: uma visao de eficiencia energetica

Energy Technology Data Exchange (ETDEWEB)

Andrade, Osvaldo A.S.N. de; Abreu, Melissa E. de; Marcal, Roberto L.; Ferreira, Ademilson D.; Ferreira, Patricia E.; Monterio, Glauber J.R.; Silva, Ademir B. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2008-07-01

The installation of a cogeneration plant has been the subject of discussions on alternatives in the Brazilian energy matrix. Considered viable solution in the not too distant past, 2001, when Brazil was undergoing a process of the economic slowdown, lack of investments in the energy sector, unemployment and reaching the peak of the crisis with the rationing of electricity. The principle of the cogeneration system is designed primarily to meet electrical demand, so there is no surplus production of energy and do not need to buy with the concessionaire, except in cases of the system stops on account of maintenance. However, there is a recovery of waste heat produced in thermodynamic processes for generation of electricity within a model that 'conventional' would be wasted. In this case, the exploitation can be given in the form of steam, hot water and/or cold, for secondary application, or can not be linked to a process. Based on the results of the fieldwork, aims to show that, despite the limitations inherent in the process of cogeneration, is justified economically the installation of this system in relation to the growth of procedures developed in CENPES and its resident effective. (author)

Cementation unit for radioactive wastes

International Nuclear Information System (INIS)

Dellamano, Jose Claudio; Vicente, Roberto; Lima, Jose Rodrigues de

2001-01-01

This communication describes the waste cementation process and facility developed at Instituto de Pesquisas Energeticas e Nucleares - IPEN. The process is based on 200 litres batch operation, in drum mixing, with continuous cement feeding. The equipment is a single recoverable helicoidal mixer and a turning table that allows the drum to rotate during the mixing operation, simulating a planetary mixer. The facility was designed to treat contact handled liquids and wet solid wastes, but can be adapted for shielded equipment and remote operation. (author)

Lows income residential tariff - An analysis of the application under the cross subsidies viewpoint; A tarifa residencial de baixa renda: uma analise de sua aplicacao perante a questao de subsidios cruzados

Energy Technology Data Exchange (ETDEWEB)

Prado Junior, Fernando Amaral de Almeida [Secretaria de Estado de Energia, Sao Paulo, SP (Brazil)

1998-12-31

The paper evaluates the impacts of a new policy in electricity pricing applied to residential customers with low income, specially in the view point of crossed subsides. This paper shows some inconsistencies in the new policy and relate the experience of CESP - Companhia Energetica de Sao Paulo - in it`s propose of adapting the low income to its franchise area. Also made an analysis of the policy`s homogeneity among different utilities. (author) 6 refs., 7 figs.; e-mail: fprado at sp.gov.br

América Latina: energía y desarrollo

Directory of Open Access Journals (Sweden)

Gabriel Sánchez S.

1982-09-01

Full Text Available EI autor del presente articulo es Ingeniero Electricista de la Universidad Nacional de Colombia y Master en Anlliisis de Sistemas de Potencia del Renssetaer Polytecnic Institute. ha sido Protesor y Director del Departamento de Ingenieria Electrica. Director del Instituto de Ensayos e Investigación de la Universidad Nacional de Colombia. Jete de la División de Energia del Departamento Nacional de Planeación y Coordinador de Planificación Energetica de la Organización Latinoamericana de Energia, OLADE.

Fission products control by gamma spectrometry in purex process solutions

International Nuclear Information System (INIS)

Goncalves, Maria Augusta

1982-01-01

This paper deals with a radiometric method for fission products analysisby gamma spectrometry. This method will be applied for fission productscontrol at the irradiated material processing facility, under construction inthe Instituto de Pesquisas Energeticas e Nucleares, SP, Brazil. Countinggeometry was defined taking into account the activities of process solutionsto be analysed, the remotely operated aliquotation device of analytical celland the available detection system. Natural and 19,91% enriched uraniumsamples were irradiated at IEAR-1 reactor in order to simulate thecomposition of Purex process solutions. After a short decay time, the sampleswere dissolved with HNO 3 and then, conditioned in standard flasks withdefined geometry. The spectra were obtained by a Ge(Li) semiconductordetector and analysed by the GELIGAM software system, losing a floppy-diskconnected to a PDP-11/05 computer. Libraries were prepared and calibrationswere made with standard sources to fit the programs to the analysis offission products in irradiated uranium solutions. It was possible to choosethe best program to be used in routine analysis with the obtained data.(author)

Analysis of possible application of regression analysis method in automation of fitting numerical data; Analiza mogucnosti primene metoda regresione analize u cilju automatizovanog fitovanja numerickih podataka

Energy Technology Data Exchange (ETDEWEB)

Altiparmakov, D; Zavaljevski, N; Dasic, N [Boris Kidric Institute of Nuclear Sciences Vinca, Beograd (Yugoslavia)

1988-12-15

The report presents an analysis of possible calculation procedure for automated data fitting. The problem is defined in the first part, and it is shown that solution demands optimisation under invariance conditions (stochastic errors) which is part of theory of planning optimal experiments. A rough review of knowledge in this field is given. Second part of the report some statistical and optimisation methods are analysed in more detail in order to be used for automated fitting. Evaluation of possible relevant calculation procedure is presented. Izvestaj prikazuje analizu mogucnosti realizacije racunskog postupka za automatizovano fitovanje poodataka. U prvom delu izvestaja razmatran je postavljeni problem i ukazano je da njegovo resavanje zahteva optimizaciju u uslovima neodredjenosti (slucajnih gresaka) sto spada u okvir teorije planiranja optimalnih eksperimenata. Dat je grubi pregled stepena izucenosti ove probblematike. U drugom delu izvestaja detaljnije su razmotrene neke statisticke i optimizacione metode koje bi se koristile u cilju automatizovanog fitovanja. Na osnovu toga data je procena mogucnosti realizacije odgovarajuuceg racunskog postupka. (author)

Optimization of patterns of control bars using neural networks; Optimizacion de patrones de barras de control usando redes neuronales

Energy Technology Data Exchange (ETDEWEB)

Mejia S, D.M. [IPN, ESFM, Depto. de Ingenieria Nuclear, 07738 Mexico D.F. (Mexico); Ortiz S, J.J. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: dulcema6715@hotmail.com

2005-07-01

In this work the RENOPBC system that is based on a recurrent multi state neural network, for the optimization of patterns of control bars in a cycle of balance of a boiling water reactor (BWR for their initials in English) is presented. The design of patterns of bars is based on the execution of operation thermal limits, to maintain criticizes the reactor and that the axial profile of power is adjusted to one predetermined along several steps of burnt. The patterns of control bars proposed by the system are comparable to those proposed by human experts with many hour-man of experience. These results are compared with those proposed by other techniques as genetic algorithms, colonies of ants and tabu search for the same operation cycle. As consequence it is appreciated that the proposed patterns of control bars, have bigger operation easiness that those proposed by the other techniques. (Author)

Shield calculations, optimization vs. paradigm; Calculos de blindajes, optimizacion vs. paradigma

Energy Technology Data Exchange (ETDEWEB)

Cornejo D, N.; Hernandez S, A.; Martinez G, A. [Centro de Proteccion e Higiene de las Radiaciones, Calle 20 No. 4113 e/41 y 47 Playa C.P. 11300 LaHabana (Cuba)]. e-mail: nestor@cphr.edu.cu

2006-07-01

Many shieldings have been designed under the criteria of 'Maximum dose rates of project'. It has created the paradigm of those 'low dose rates', for the one which not few specialists would consider unacceptable levels of dose rate superior to the units of {mu}Sv.h{sup -1}, independently of the exposure times. At the present time numerous shieldings are being designed considering dose restrictions in real times of exposure. After these new shieldings, the dose rates could be notably superior to those after traditional shieldings, without it implies inadequate designs or constructive errors. In the work significant differences in levels of dose rates and thickness of shieldings estimated by both methods for some typical facilities. It was concluded that the use of real times of exposure is more adequate for the optimization of the Radiological Protection, although this method demands bigger care in its application. (Author)

La refrigeracion nocturna en edificios de oficinas optimizacion del sistema mecanico

NARCIS (Netherlands)

Lain, M.; Hensen, J.L.M.

2007-01-01

En muchas ocasiones se ha tratado sobre la necesidad de optimizar el sistema mecánico nocturno de refrigeración. En este documento se trata de la utilización de simulaciones por ordenador tanto para el apoyo al diseño de un edificio nuevo y desarrollo de un sistema HVAC, como para la optimización de

GENESIS DE UNA UNIDAD DE OPTIMIZACION DE LA FARMACOTERAPIA EN ARGENTINA.

Directory of Open Access Journals (Sweden)

Marisel Colautti

2014-02-01

Full Text Available Los medicamentos colaboraron en cimentar mayor salud, sin embargo son generadores de problemas que surgen de no atender adecuadamente la complejidad farmacoterapéutica. En este sentido, resulta propicio incorporar el concepto de Atención Farmacéutica (AF para repensar la actuación de los farmacéuticos. La implementación de AF muestra un impacto positivo en resultados clínicos, humanísticos y económicos, pero se reconocen barreras para su implementación. El sistema de salud argentino es fragmentado y los servicios farmacéuticos se encuentran incluidos en esta lógica. En este contexto, la Universidad y el Colegio de Farmacéuticos observan la necesidad de conformar espacios de AF. El objetivo de esta comunicación es presentar la génesis de la Unidad de Optimización de la Farmacoterapia (UOF como un servicio a la población en la ciudad de Rosario, Argentina. La UOF integra actividades de asistencia, docencia e investigación e intenta promover aproximación entre la Universidad Pública y la comunidad en relación a la problemática de utilización de medicamentos. Funciona desde abril de 2012 y se entiende como alternativa de inclusión social, disponible gratuitamente, con criterios bioéticos que alcancen tanto a la relación profesional-paciente, al diseño de políticas de medicamentos como a la evaluación económica y desarrollo de herramientas metodológicas y tecnológicas.

Altervative energy sources, principles, applications, state of the art and perspectives; Fuentes alternativas de energia, principios, aplicaciones, estado del arte y perspectivas

Energy Technology Data Exchange (ETDEWEB)

Saldana Flores, R; Gonzalez Galarza, R; Ramos Berumen, C; Agredano Diaz, J; Arvizu Fernandex, J L [Instituto de Investigaciones Electricas (Mexico); Saldana Flores, R; Gonzalez Galarza, R; Ramos Berumen, C; Agredano Diaz, J; Arvizu Fernandez, J L [Instituto de Investigaciones Electricas (Mexico)

1997-12-31

All over the world, the energy availability has turned out to be one of the most important problems. The greatest majority of countries, developing as well as industrialized countries are being affected by the increasing demand of energy to satisfy their social and economic development goals and the need of complementing the conventional sources of energy with the non-conventional sources has become imperative for most of them. Beginning the last decade, it has been recognized the inevitability that in a non too far future the energy supply will suffer a transitional change from its present oil dependency towards more diversified energy combinations. This transition that involves the development of a variety of energy sources, with preference to the renewable sources, represents an important technological challenge that has to be attained in a gradual and orderly fashion. Among the new energy forms and the new technologies to obtain energy that have been considered to become a part of the energy supply in the future are the so called non-conventional sources of energy (NCSE) or alternative sources of energy, such as solar, biomass, wind power and small hydro stations. [Espanol] A nivel mundial, la disponibilidad de energia se ha convertido en uno de los problemas ms importantes. La gran mayoria de los paises, tanto en desarrollo como industrializados, se ven afectados por demandas crecientes de energia para satisfacer sus metas de desarrollo econonico y social, y la necesidad de complementar las fuentes comerciales con fuentes no convencionales se ha vuelto imperativa para la mayoria de ellos. A partir de la ultima decada, se ha reconocido como inevitable que en un futuro no muy lejano la oferta de energa debera sufrir una transicin desde su actual dependencia de los hidrocarburos hacia combinaciones energeticas mas diversificadas. Esta transicion que implica lograr el aprovechamiento de una variedad de fuentes de energia, prestando particular atencion a los

Altervative energy sources, principles, applications, state of the art and perspectives; Fuentes alternativas de energia, principios, aplicaciones, estado del arte y perspectivas

Energy Technology Data Exchange (ETDEWEB)

Saldana Flores, R; Gonzalez Galarza, R.; Ramos Berumen, C.; Agredano Diaz, J.; Arvizu Fernandex, J.L. [Instituto de Investigaciones Electricas (Mexico); Saldana Flores, R.; Gonzalez Galarza, R.; Ramos Berumen, C.; Agredano Diaz, J.; Arvizu Fernandez, J.L. [Instituto de Investigaciones Electricas (Mexico)

1996-12-31

All over the world, the energy availability has turned out to be one of the most important problems. The greatest majority of countries, developing as well as industrialized countries are being affected by the increasing demand of energy to satisfy their social and economic development goals and the need of complementing the conventional sources of energy with the non-conventional sources has become imperative for most of them. Beginning the last decade, it has been recognized the inevitability that in a non too far future the energy supply will suffer a transitional change from its present oil dependency towards more diversified energy combinations. This transition that involves the development of a variety of energy sources, with preference to the renewable sources, represents an important technological challenge that has to be attained in a gradual and orderly fashion. Among the new energy forms and the new technologies to obtain energy that have been considered to become a part of the energy supply in the future are the so called non-conventional sources of energy (NCSE) or alternative sources of energy, such as solar, biomass, wind power and small hydro stations. [Espanol] A nivel mundial, la disponibilidad de energia se ha convertido en uno de los problemas ms importantes. La gran mayoria de los paises, tanto en desarrollo como industrializados, se ven afectados por demandas crecientes de energia para satisfacer sus metas de desarrollo econonico y social, y la necesidad de complementar las fuentes comerciales con fuentes no convencionales se ha vuelto imperativa para la mayoria de ellos. A partir de la ultima decada, se ha reconocido como inevitable que en un futuro no muy lejano la oferta de energa debera sufrir una transicin desde su actual dependencia de los hidrocarburos hacia combinaciones energeticas mas diversificadas. Esta transicion que implica lograr el aprovechamiento de una variedad de fuentes de energia, prestando particular atencion a los

Application of the Pinch analysis for the design of a cogeneration system in a paper mill; Aplicacion del analisis Pinch para el diseno de un sistema de cogeneracion en una industria papelera

Energy Technology Data Exchange (ETDEWEB)

Mani Gonzalez, A. G.; Arriola Medellin, A. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

The Pinch Analysis is a set of principles, tools and rules for the design that allow the engineer find the best way to configure the elements of a process. In the last ten years it has been utilized for the design of new processes as well as in the energy optimization of existing processes. In this paper the tools utilized for the integration of a cogeneration system in a process for the production of paper is presented. It is also presented how the combined treatment of the Pinch Analysis and the exergy concept allows to define, before the detailed design, the cogeneration potential, the fuel consumption and the amount of pollutant emissions for different cogeneration schemes. [Espanol] El analisis Pinch es un conjunto de principios, herramientas y reglas de diseno que permiten al ingeniero encontrar la mejor manera de configurar los elementos de un proceso. En los ultimos diez anos se ha utilizado para el diseno de procesos nuevos asi como en la optimacion energetica de procesos existentes. En el presente articulo se presentan las herramientas utilizadas para la integracion de un sistema de cogeneracion en un proceso de produccion de papel. Se muestra tambien como el tratamiento combinado del analisis Pinch y el concepto de energia permite definir, antes del diseno detallado, el potencial de cogeneracion, el consumo de combustible y la cantidad de emisiones contaminantes para diferentes esquemas de cogeneracion.

Application of the Pinch analysis for the design of a cogeneration system in a paper mill; Aplicacion del analisis Pinch para el diseno de un sistema de cogeneracion en una industria papelera

Energy Technology Data Exchange (ETDEWEB)

Mani Gonzalez, A G; Arriola Medellin, A [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

The Pinch Analysis is a set of principles, tools and rules for the design that allow the engineer find the best way to configure the elements of a process. In the last ten years it has been utilized for the design of new processes as well as in the energy optimization of existing processes. In this paper the tools utilized for the integration of a cogeneration system in a process for the production of paper is presented. It is also presented how the combined treatment of the Pinch Analysis and the exergy concept allows to define, before the detailed design, the cogeneration potential, the fuel consumption and the amount of pollutant emissions for different cogeneration schemes. [Espanol] El analisis Pinch es un conjunto de principios, herramientas y reglas de diseno que permiten al ingeniero encontrar la mejor manera de configurar los elementos de un proceso. En los ultimos diez anos se ha utilizado para el diseno de procesos nuevos asi como en la optimacion energetica de procesos existentes. En el presente articulo se presentan las herramientas utilizadas para la integracion de un sistema de cogeneracion en un proceso de produccion de papel. Se muestra tambien como el tratamiento combinado del analisis Pinch y el concepto de energia permite definir, antes del diseno detallado, el potencial de cogeneracion, el consumo de combustible y la cantidad de emisiones contaminantes para diferentes esquemas de cogeneracion.

Evaluation of the BPW34 photodiode response in quality of RQR radiation of the regulation IEC 61267 implanted at the IPEN and CRCN-NE, Brazil; Avaliacao da resposta do fotodiodo BPW34 em qualidades de radiacao RQR da norma IEC 61267 implantadas no IPEN e no CRCN-NE

Energy Technology Data Exchange (ETDEWEB)

Magalhaes, Cinthia M.S. de; Santos, Luiz A.P. dos; Santos, Marcus A.P. dos, E-mail: lasantos@cnen.gov.b, E-mail: masantos@cnen.gov.b [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-PE), Recife, PE (Brazil); Caldas, Linda V.E., E-mail: lcaldas@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Souza, Divanizia do N., E-mail: divanizi@ufs.b [Universidade Federal de Sergipe (UFS), Aracaju, SE (Brazil). Dept. de Fisica

2011-10-26

This paper evaluated the answer of two commercial BPW34 photodiodes in four RQR radiation qualities implanted, in accordance with the regulation IEC 61267, at the laboratory of the instrument calibrations of the Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN) and radiation metrology laboratory of Northeastern Centro Regional de Ciencias Nucleares (CRCN-NE/CNEN). The results have shown that is possible to relate the qualities implanted at those laboratories and that the BPW34 photodiode can be useful for comparative evaluations of distinct qualities of radiodiagnostic beams

Bilateral Comparison CIEMAT-CENTIS-DMR for radionuclide activity measurements

International Nuclear Information System (INIS)

Oropesa Verdecia, P.; Garcia-Torano, E.

2004-01-01

We present the results of a bilateral comparison of radionuclide activity measurements between the Radionuclide Metrology Department of the Center of Isotopes of Cuba (CENTIS-DMR), and the Ionising Radiation Metrology Laboratory (LMRI) of the Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas (CIEMAT) of Spain. The aim of the comparison was to establish the comparability of the measurement instruments and methods used to obtain radioactive reference materials of some gamma-emitting nuclides at CENTIS-DMR. The results revealed that there are no statistically significant differences between the data reported by both laboratories. (Author) 7 refs

Utilização de metodologias para a análise térmica de um sistema de aquecimento de água solar industrial

OpenAIRE

Parente Lima, Thiago

2010-01-01

Alem do uso doméstico, a energia solar possui amplo potencial de aplicação em processos industriais. Hoje a maioria desses processos utiliza como fonte energetica combustíveis nao renováveis ou biomassa, cuja queima provoca os impactos ambientais já conhecidos. A utilização ao da energia solar pode reduzir a dependência do uso desses combustíveis e os seus conseqüentes impactos ao meio ambiente. O objetivo desse trabalho é fazer um estudo de viabilidade técnicoeconômica de um sistema...

Bilateral Comparison CIEMAT-CENTIS-DMR for radionuclide activity measurements; Comparacion Bilateral CIEMAT-CENTIS-DMR de la Medida de Actividad de Radionucleidos

Energy Technology Data Exchange (ETDEWEB)

Oropesa Verdecia, P.; Garcia-Torano, E.

2004-07-01

We present the results of a bilateral comparison of radionuclide activity measurements between the Radionuclide Metrology Department of the Center of Isotopes of Cuba (CENTIS-DMR), and the Ionising Radiation Metrology Laboratory (LMRI) of the Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas (CIEMAT) of Spain. The aim of the comparison was to establish the comparability of the measurement instruments and methods used to obtain radioactive reference materials of some gamma-emitting nuclides at CENTIS-DMR. The results revealed that there are no statistically significant differences between the data reported by both laboratories. (Author) 7 refs.

Radioactive waste management in sealed sources laboratory production

International Nuclear Information System (INIS)

Carvalho, Gilberto

2001-01-01

The laboratory of sealed sources production, of Instituto de Pesquisas Energeticas e Nucleares, was created in 1983 and since then, has produced radioactive sources for industry and engineering in general, having specialization in assembly of radiation sources for non destructive testings, by gammagraphy, with Iridium-192, that represents 98% of the production of laboratory and 2% with the Cobalt-60, used in nuclear gages. The aim of this work, is to quantify and qualify the radioactive wastes generated annually, taking into account, the average of radioactive sources produced, that are approximately 220 sources per year

The Gtz system management applied to photovoltaic rural electrification projects

Energy Technology Data Exchange (ETDEWEB)

Rosenthal, Pablo [Brendel Proper, (Bolivia)]|[GTZ-Cooperacion Tecnica de la Republica de Alemania, (Germany)

1995-12-31

The GTZ (Federal Republic of Germany Technical Cooperation Society) has developed a general project design system, particularly for Renewable Energy, that systematically covers all aspects necessary in their planning and implementation, so that their effects are sustainable in the long run, and cover as well all the requirements of a determined diffusion. This is what they have called System Management. This methodology of project implementation can be described as capable of being applied to any action area, and has already proved and validated its efficiency in projects where it has been applied. The main reason for its use is based on the correction of previous experiences with projects that had a tendency towards one area of action alone, in a much too exclusive way -mainly the technological- neglecting important aspects in the sustainability of technologies being introduced. The experience of PROPER - Bolivia (Programa para la difusion de energias renovables), who has been applying this system to its projects, is being used as a methodological basis. PROPER started in 1991, and is programed to last until September or 1996. Among the main components being described in the system`s methodology, in the particular case of PHOTOVOLTAIC RURAL ELECTRIFICATION PROJECTS, stand out the areas of Technological Transference; Training; Diffusion; Financing; Energy Policy; Planning, Monitoring, and Evaluation; and Support and Follow-up to the supply and demand. [Espanol] La GTZ (Sociedad de Cooperacion Tecnica de la Republica Federal de Alemania) ha desarrollado un proyecto de sistema de diseno general, particularmente para Energia Renovable, que cubre sistematicamente todos los aspectos necesarios en su planeacion y puesta en practica , de tal manera que sus efectos son a la larga sustentables y cubren, asimismo todos los requerimientos de una difusion determinada. Esto es lo que han llamado {sup A}dministracion del Sistema{sup .} Esta metodologia de puesta en practica

The Gtz system management applied to photovoltaic rural electrification projects

Energy Technology Data Exchange (ETDEWEB)

Rosenthal, Pablo [Brendel Proper, (Bolivia); [GTZ-Cooperacion Tecnica de la Republica de Alemania, (Germany)

1996-12-31

The GTZ (Federal Republic of Germany Technical Cooperation Society) has developed a general project design system, particularly for Renewable Energy, that systematically covers all aspects necessary in their planning and implementation, so that their effects are sustainable in the long run, and cover as well all the requirements of a determined diffusion. This is what they have called System Management. This methodology of project implementation can be described as capable of being applied to any action area, and has already proved and validated its efficiency in projects where it has been applied. The main reason for its use is based on the correction of previous experiences with projects that had a tendency towards one area of action alone, in a much too exclusive way -mainly the technological- neglecting important aspects in the sustainability of technologies being introduced. The experience of PROPER - Bolivia (Programa para la difusion de energias renovables), who has been applying this system to its projects, is being used as a methodological basis. PROPER started in 1991, and is programed to last until September or 1996. Among the main components being described in the system`s methodology, in the particular case of PHOTOVOLTAIC RURAL ELECTRIFICATION PROJECTS, stand out the areas of Technological Transference; Training; Diffusion; Financing; Energy Policy; Planning, Monitoring, and Evaluation; and Support and Follow-up to the supply and demand. [Espanol] La GTZ (Sociedad de Cooperacion Tecnica de la Republica Federal de Alemania) ha desarrollado un proyecto de sistema de diseno general, particularmente para Energia Renovable, que cubre sistematicamente todos los aspectos necesarios en su planeacion y puesta en practica , de tal manera que sus efectos son a la larga sustentables y cubren, asimismo todos los requerimientos de una difusion determinada. Esto es lo que han llamado {sup A}dministracion del Sistema{sup .} Esta metodologia de puesta en practica

BUTREN-RC an hybrid system for the recharges optimization of nuclear fuels in a BWR; BUTREN-RC un sistema hibrido para la optimizacion de recargas de combustible nuclear en un BWR

Energy Technology Data Exchange (ETDEWEB)

Ortiz S, J.J.; Castillo M, J.A. [ININ, Carretera Mexico-Toluca Km. 36.5, 52045 Estado de Mexico (Mexico); Valle G, E. del [IPN, ESFM, 07738 Mexico D.F. (Mexico)

2004-07-01

The obtained results with the hybrid system BUTREN-RC are presented that obtains recharges of nuclear fuel for a BWR type reactor. The system has implemented the methods of optimization heuristic taboo search and neural networks. The optimization it carried out with the technique of taboo search, and the neural networks, previously trained, were used to predict the behavior of the recharges of fuel, in substitution of commercial codes of reactor simulation. The obtained recharges of nuclear fuel correspond to 5 different operation cycles of the Laguna Verde Nuclear Power plant, Veracruz in Mexico. The obtained results were compared with the designs of this cycles. The energy gain with the recharges of fuel proposals is of approximately 4.5% with respect to those of design. The time of compute consumed it was considerably smaller that when a commercial code for reactor simulation is used. (Author)

Energy efficiency index to artificially conditioned buildings; Indice de eficiencia energetica para edificios climatizados artificialmente

Energy Technology Data Exchange (ETDEWEB)

Jota, Patricia Romeiro da Silva; Santos, Carla da Silva; Costa, Kelly Luciene C. [Centro Federal de Educacao Tecnologica de Minas Gerais (CEMIG/CEFET), Belo Horizonte, MG (Brazil). Centro de Pesquisa em Energia Inteligente

2010-07-01

Conditioning buildings has been growing in number and are responsible for a significant portion of the energy used worldwide. The building energy use can be measured by the index of energy performance and specific fuel consumption (EC). The specific consumption is an index where the energy is normalized by the factors that affect energy use in order to obtain an index to explain variations in consumption. In this paper, we present a methodology to obtain a specific consumption that takes into account one of the factors that most affect energy use in these buildings, that is, the external temperature. The study is based on analysis of consumption of air conditioning system according to temperature. Through this analysis we obtain a function to facilitate the standardization of energy use, depending on the temperature outside. This methodology was tested in previous work on real buildings without stratification of energy, and this work will be presented a case study of a building whose energy measurement is stratified. The proposed index is the ratio between the energy consumption of air conditioning system corrected by the temperature through the function K(T). It was possible to demonstrate the efficiency of the index to eliminate the effect of temperature and thus to evaluate the evolution of specific consumption over the months analyzed. (author)

Remote level radiation monitoring system for the brazilian IEA-R1 nuclear research reactor for routine radiation protection procedures and as a support tool in case of radiological emergency

International Nuclear Information System (INIS)

Cardenas, Jose P.N.; Romero Filho, Christovam R.; Madi Filho, Tufic

2008-01-01

Nuclear facilities must monitoring radiation levels to establish procedures for radiological protection staff involving workers and the public. The Instituto de Pesquisas Energeticas e Nucleares - IPEN has 5 important plants and in case of accident in one of them, the Institute keeps operational an Emergency Response Plan (ERP). This document (ERP) is designed to coordinate all procedures to assure safe and secure conditions for workers, environment and the public. One of this plants is the IEA-R1 reactor, it is the oldest nuclear research reactor (pool type) in Latin America, reached it first criticality in September of 1957. The reactor is used 60 hours/week with continuous operation and with nominal power of 3.5 MW, with technical conditions to operate at 5 MW thermal power. This reactor has a Radiological Emergency Plan that establishes the implementation of rules for workers and people living at the exclusion area in the case of an emergency situation. This paper aims to describe the implementation of a computational system developed for remote radiation monitoring, in a continuous schedule of IEA-R1 nuclear research reactor containment building. Results of this action can be used as a support mean in a radiological emergency. All necessary modules for radiation detection, signals conditioners and processing, data acquisition board, software development and computer specifications are described. The data acquisition system operating in the reactor shows readings concerned to radiation environment such as activity, doses and concentration in real time and displays a periodical data bank (Data Base) of this features allowing through the surveillance of the operation records anytime, leading to studies and analysis of radiation levels. Results of this data acquisition are shown by means of computer graphics screens developed for windows environment using Visual Basic software. (author)

Comparison of the thermal gain of the more commonly roofing systems used in Mexico`s social dwellings; Comparacion de la ganancia termica de los sistemas de techumbre mas comunmente utilizados en la vivienda social en Mexico

Energy Technology Data Exchange (ETDEWEB)

Fernandez, Alfredo [Division de Estudios de Posgrado de la Facultad de Arquitectura UNAM, Mexico, D. F. (Mexico); Morillon, David [Comision Nacional para el Ahorro de Energia (CONAE), Mexico, D. F. (Mexico)

1996-12-31

Under the frame of discussion of the Mexican Official Standard 008 (Integral Energy Efficiency in non-residential Buildings), and with the purpose of assessing its feasibility and possible extension to residential buildings, this paper, whose objective is to evaluate the roofing systems (opaque) more commonly utilized on the social dwellings in Mexico, is presented. To perform this evaluation the heat gains by conduction through the roofing in different cities were obtained. Later on these heat gains were compared against the energy consumption that would produce its removal in each one of the cases. Finally, thermal resistance values (R) that allow, in significant form diminishing such gains, are presented, producing in consequence, a thermally efficient building. [Espanol] Dentro del marco de discusion de la Norma Oficial Mexicana 008 (Eficiencia energetica integral en edificios no residenciales), y con el fin de evaluar su factibilidad y posible extension hacia las edificaciones residenciales, se presenta este trabajo que tiene como objetivo la evaluacion de los sistemas de techumbre (opacos) mas comunmente utilizados dentro de la vivienda social en Mexico. Para realizar esta evaluacion se obtuvieron las ganancias por conduccion a traves del techo para distintas ciudades. Posteriormente, se compararon dichas ganancias contra el consumo de energia que produciria la remocion de las mismas en cada uno de los casos. Finalmente, se proponen valores de Resistencia Termica (R) que permitan disminuir de manera importante dichas ganancias teniendo, en consecuencia, una edificacion energeticamente eficiente.

Comparison of the thermal gain of the more commonly roofing systems used in Mexico`s social dwellings; Comparacion de la ganancia termica de los sistemas de techumbre mas comunmente utilizados en la vivienda social en Mexico

Energy Technology Data Exchange (ETDEWEB)

Fernandez, Alfredo [Division de Estudios de Posgrado de la Facultad de Arquitectura UNAM, Mexico, D. F. (Mexico); Morillon, David [Comision Nacional para el Ahorro de Energia (CONAE), Mexico, D. F. (Mexico)

1997-12-31

Under the frame of discussion of the Mexican Official Standard 008 (Integral Energy Efficiency in non-residential Buildings), and with the purpose of assessing its feasibility and possible extension to residential buildings, this paper, whose objective is to evaluate the roofing systems (opaque) more commonly utilized on the social dwellings in Mexico, is presented. To perform this evaluation the heat gains by conduction through the roofing in different cities were obtained. Later on these heat gains were compared against the energy consumption that would produce its removal in each one of the cases. Finally, thermal resistance values (R) that allow, in significant form diminishing such gains, are presented, producing in consequence, a thermally efficient building. [Espanol] Dentro del marco de discusion de la Norma Oficial Mexicana 008 (Eficiencia energetica integral en edificios no residenciales), y con el fin de evaluar su factibilidad y posible extension hacia las edificaciones residenciales, se presenta este trabajo que tiene como objetivo la evaluacion de los sistemas de techumbre (opacos) mas comunmente utilizados dentro de la vivienda social en Mexico. Para realizar esta evaluacion se obtuvieron las ganancias por conduccion a traves del techo para distintas ciudades. Posteriormente, se compararon dichas ganancias contra el consumo de energia que produciria la remocion de las mismas en cada uno de los casos. Finalmente, se proponen valores de Resistencia Termica (R) que permitan disminuir de manera importante dichas ganancias teniendo, en consecuencia, una edificacion energeticamente eficiente.

Evaluation of energy efficiency of climatization system in dairy cattle free-stall; Avaliacao da eficiencia energetica de sistemas de climatizacao em galpoes tipo 'free-stall' para confinamento de bovinos leiteiros

Energy Technology Data Exchange (ETDEWEB)

Perissinoto, Mauricio [Escola Superior de Agricultura Luiz de Queiroz (ESALQ/USP), Piracicaba, SP (Brazil). Dept. de Engenharia Rural. Setor de Construcoes Rurais], Email: mperissi@esalqusp.br; Moura, Daniella Jorge de; Lima, Karla Andrea Oliveira de; Mendes, Angelica Signor [Universidade Estadual de Campinas (FEAGRI/UNICAMP), SP (Brazil). Fac. de Engenharia Agricola; Matarazzo, Soraia Vanessa

2006-07-01

The objective of this research was the evaluation of the economical efficiency, in relation to water and energy expenses, of two different evaporative cooling systems, misting and sprinkler, associated with forced ventilation. The study was carried out in a commercial dairy cattle farm located in a small city of Sao Paulo State. The experimental period was twenty-eight consecutive days of November 2003. For the economical analysis of each system of climatization the cost with electrical energy and water expended in each system was considered and also the feeding consumption. The sprinkling cooling system presented a greater consumption of water and energy than the misting system. Even those treatments promoting similar feed intake (the difference was 3.0 kg DM.animal{sup -1}.month{sup -1}), the sprinkling system associated to forced ventilation led to an increase (18.0 liters.animal{sup -1}.month{sup -1}) of 3% in milk production. As consequence, it was observed an increase of 5,8% in total month profit in relation to misting system. (author)

Institutional effectiveness of energy efficiency national programs: Brazil, Chile, Mexico and Uruguay cases; Eficacia institucional de los programas nacionales de eficiencia energetica: los casos del Brasil, Chile, Mexico y el Uruguay

Energy Technology Data Exchange (ETDEWEB)

Ruchansky, Beno [Division de Recursos Naturales e Infraestructura de la CEPAL (Chile); De Buen Rodriguez, Odon [Energia, Tecnologia y Educacion, S.C., ENTE, S.C. (Mexico); Januzzi, Gilberto; Romero, Andres

2011-05-15

This work describes the experience of four Latin American countries in the area of energy efficiency (EE), with particular emphasis on the creation and effectiveness of institutional systems needed to develop policies, programs and mechanisms to promote EE. The wide variety of situations presented in the study of national cases in Brazil, Chile, Mexico and Uruguay, as well as the wealth of their experiences may provide significant contributions to the promotion of EE in the region. Brazil stands out because of its long and rich history in the field of promoting EE, in particular, for work conducted in 1985 by PORCEL, a federal program with its base of operations at ELETROBRAS, which served as the national coordinator of EE activities in the electric sector during a large part of the period and was responsible for the successful implementation of activities to foster EE in various areas. While PROCEL and CONPET continue to fulfill an important role, other actors have become involved over time in the activities related to EE, with a gradual transfer over recent years of the activities of these programs to the primary agencies in the sector, particularly MME, ANEEL, ANP and EPE. Currently, Brazil has an extensive network of public and private institutions involved in the area of EE, as well as norms that encourage EE with sufficient resources and regulatory mechanisms to finance and guide these activities. Although a large variety of initiatives have been implemented, they do not yet constitute a national EE policy. Thus, the need is seen for greater institutional coordination that allows for improving the convergence of results, utilizing economies of scale and creating opportunities to develop a national EE policy. Along the lines of the perspective described, the development is underway of a National Energy Efficiency Plan (PNEf, Spanish acronym), coordinated by the MME, that should include the basic elements needed to define an EE policy. Chile has relatively

Institutional effectiveness of energy efficiency national programs: Brazil, Chile, Mexico and Uruguay cases; Eficacia institucional de los programas nacionales de eficiencia energetica: los casos del Brasil, Chile, Mexico y el Uruguay

Energy Technology Data Exchange (ETDEWEB)

Ruchansky, Beno [Division de Recursos Naturales e Infraestructura de la CEPAL (Chile); De Buen Rodriguez, Odon [Energia, Tecnologia y Educacion, S.C., ENTE, S.C. (Mexico); Januzzi, Gilberto; Romero, Andres

2011-05-15

This work describes the experience of four Latin American countries in the area of energy efficiency (EE), with particular emphasis on the creation and effectiveness of institutional systems needed to develop policies, programs and mechanisms to promote EE. The wide variety of situations presented in the study of national cases in Brazil, Chile, Mexico and Uruguay, as well as the wealth of their experiences may provide significant contributions to the promotion of EE in the region. Brazil stands out because of its long and rich history in the field of promoting EE, in particular, for work conducted in 1985 by PORCEL, a federal program with its base of operations at ELETROBRAS, which served as the national coordinator of EE activities in the electric sector during a large part of the period and was responsible for the successful implementation of activities to foster EE in various areas. While PROCEL and CONPET continue to fulfill an important role, other actors have become involved over time in the activities related to EE, with a gradual transfer over recent years of the activities of these programs to the primary agencies in the sector, particularly MME, ANEEL, ANP and EPE. Currently, Brazil has an extensive network of public and private institutions involved in the area of EE, as well as norms that encourage EE with sufficient resources and regulatory mechanisms to finance and guide these activities. Although a large variety of initiatives have been implemented, they do not yet constitute a national EE policy. Thus, the need is seen for greater institutional coordination that allows for improving the convergence of results, utilizing economies of scale and creating opportunities to develop a national EE policy. Along the lines of the perspective described, the development is underway of a National Energy Efficiency Plan (PNEf, Spanish acronym), coordinated by the MME, that should include the basic elements needed to define an EE policy. Chile has relatively

Methodology Einstein for energy audit and design of solar heat systems in industrial processes; Metodologia Einstein para auditoria energetica y diseno de sistemas de calor solar en procesos industriales

Energy Technology Data Exchange (ETDEWEB)

Schweiger, H.; Vannoni, C.; Danov, S.; Facci, E.

2008-07-01

Estimates show that 57% of the total industrial heat demand in EU countries is required at low (up to 100 degree centigrade) and medium temperature (up to 400 degree centigrade). An important part of this thermal energy demand can be covered by solar thermal energy. In the framework of the European project EINSTEIN (Expert-system for an Intelligent Supply of Thermal Energy in Industry), an expert system is being developed, where process optimisation, heat recovery, intelligent cold supply and renewable energy are integrated into a holistic energy audit methodology with the objective of reducing energy consumption in the industrial sector. EINSTEIN is being developed as a free and open source software project. (Author)

Optimization of a hydrocarbon bioremediation system at laboratory scale; Optimizacion de un sistema de biorremediacion de hidrocarburos a escala de laboratorio

Energy Technology Data Exchange (ETDEWEB)

Acuna, A. J.; Tonin, N. L.; Diaz, V.; Pucci, G. N.; Pucci, O. H. [Centro de Estudios e Investigacion en Microbiologia Aplicada (CEIMA), Universidad Nacional de la Patagonia San Juan Bosco (Argentina); ar, ntonin@unpata. edu.; com, victordj_2003@hotmail.; ar, granapu@unpata. edu.; ar, ceima@unpata. edu.

2012-01-15

The aim of this study was to optimize the parameters of moisture, temperature and ratio of nutrients to estimate the possibility of applying the technique of bioremediation in a soil contaminated with hydrocarbons. For this, an initial characterization of contaminated soil was made according to their physical and chemical characteristics and the number of heterotrophic and hydrocarbon degraders bacteria. Also the contaminant concentration by gravimetric method and by gas chromatography was studied. To optimize moisture and temperature, microcosms with moisture of 3%, 10%, 15% and 20% and temperatures of 5, 15, 28 and 37 degrees Celsius were used. The monitoring of the mineralization of hydrocarbons was performed by measuring the CO{sub 2} produced. To optimize the ratio of nutrients, different microcosms were designed and were monitored by oxygen consumption and by determination of hydrocarbons by gas chromatography. The C:N:P relationships studied were 100:20:2, 100:10:1, 100:5:0,5 and 100:1:0,1. The results indicate that the mineralization of hydrocarbons was optimal for moisture of 10% to 20% and temperatures of 25 degrees Celsius to 37 degrees Celsius with CO{sub 2} production values of 3000-4500 mg CO{sub 2} kg-1. The optimal C:N:P ratio was 100:1:0,1 in which the highest oxygen consumption was and the elimination of 83% of total hydrocarbons determined by gas chromatography with 78% and 89% of n-alkanes and polyaromatic hydrocarbons elimination, respectively. [Spanish] El objeto de este trabajo fue optimizar los parametros de humedad, temperatura y relacion de nutrientes para estimar la posibilidad de aplicar la tecnica de biorremediacion en un suelo contaminado con hidrocarburos. Para esto se realizo una caracterizacion inicial del suelo contaminado en funcion de sus caracteristicas fisicas y quimicas, su cantidad de microorganismos heterotrofos y degradadores de hidrocarburos. Tambien se estudio la concentracion del contaminante por metodo gravimetrico y por cromatografia gaseosa. Para optimizar humedad y temperatura se trabajo en microcosmos con humedades de 3%, 10%, 15% y 20% y temperaturas de 5, 15, 28 y 37 grados centigrados, realizando un seguimiento de la mineralizacion de los hidrocarburos midiendo el CO{sub 2} producido. Para optimizar la relacion de nutrientes se disenaron microcosmos diferentes que fueron monitoreados por consumo de oxigeno y por determinacion de hidrocarburos por cromatografia gaseosa. Las relaciones C:N:P estudiadas fueron 100:20:2, 100:10:1, 100:5:0,5 y 100:1:0,1. Los resultados obtenidos indican que la mineralizacion de hidrocarburos fue optima para humedades de 10% a 20% y a temperaturas de 25 a 37 grados centigrados con valores de produccion de CO{sub 2} de 3000 a 4500 mg CO{sub 2} kg-1. La relacion optima C:N:P fue de 100:1:0,1 en la que se observo el mayor consumo de oxigeno y la remocion de 83% de los hidrocarburos totales determinados por cromatografia gaseosa, con 78% y 89% de eliminacion de los hidrocarburos n-alcanos y poliaromaticos, respectivamente.

Hydrologic-agronomic-economic model for the optimal operation of the Yaqui river reservoir system using genetic algorithms; Modelo hidrologico-agronomico-economico para la operacion optima del sistema de presas del rio Yaqui, usando algoritmos geneticos

Energy Technology Data Exchange (ETDEWEB)

Minjares-Lugo, Jose Luis; Salmon-Castelo, Roberto Fernando; Oroz-Ramos, Lucas Antonio [Comision Nacional del Agua (Mexico); Cruz-Medina, Isidro Roberto [Instituto Tecnologico de Sonora (Mexico)

2008-07-15

The objective of this study is to develop an integrated hydrologic-agronomic-economic annual model for the optimal operation of the Yaqui River reservoir system to support irrigation and urban water supply in the watershed. The model solves for each year's water allocations by crop, maximizing annual agricultural income for a specified risk of reservoir shortages and spills. It accounts for adjustments in water supply arising from changes in precipitation and runoff uncertainty and from changes in water demand arising from variations in crop prices and production costs. Model predictions for the agricultural year 2000-2001 are compared with observed results to test the model's predictive ability. Results demonstrate that the model can be used to optimize and analyze reservoir system operation and for water resources management in the Irrigation District No. 041, providing a framework for improving the operation of a reservoir system, selecting an optimal cropping pattern according to its maximum economic benefits, and in the optimal monthly water releases from the reservoir system. The model considers the simultaneous operation of three dams and it is applied to the Irrigation District No. 041, Rio Yaqui. [Spanish] El objetivo de este estudio es desarrollar un modelo integral de optimizacion anual para definir la operacion del sistema de presas del rio Yaqui y la asignacion del volumen mensual de agua para la irrigacion de diferentes cultivos, asi como para satisfacer los requerimientos de uso urbano basado en las condiciones hidrologicas, agronomicas y economicas en la cuenca. El modelo maximiza los beneficios anuales netos del sector agricola, minimizando el riesgo de deficit o derrames en el sistema de presas; incluye cambios en el suministro de agua debido a la incertidumbre de las precipitaciones y del escurrimiento del rio y cambios en la demanda de agua provocados por la incertidumbre de los precios y costos de los cultivos. Se utilizaron datos del

The distributed generation in Mexico: Which are the new perspectives associated to the institutional reforms of the electrical sector?; La generacion distribuida en Mexico: Cuales son las nuevas perspectivas asociadas a las reformas institucionales del sector electrico?

Energy Technology Data Exchange (ETDEWEB)

Islas Samperio, Jorge [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico); Menanteau, Philippe [Departamento de Economia y Politica de la Energia, Universidad Pierre Mendes France (France)

2004-06-15

Historically, the electrical systems were constituted from local networks of small scale that were added together progressively to benefit from the effects of a more abundant demand and of the economies of scale in generation, that authorize the large interconnected systems. This logic at the moment seems to show certain limits, the factors that influence these technologies can vary greatly from one country to another, but nevertheless it is found in different degrees certain constants such as the search for a greater reliability in the electrical supply, the putting into work prevention policies of climatic change or the reforms of the electrical sector. In this work the influence of these factors was examined insisting particularly on the consequences of the opening of the electrical sector, departing from an analysis of the international experience in a first time and later examining the case of Mexico in the context of the present energy situation and the debate of the energy reform. The distributed generation: a new vector of technological opportunities in the electrical sector, the barriers for the diffusion of the distributed generation: the lessons of the international experience, the institutional problematic of the distributed generation within the effective legal framework of Mexico. [Spanish] Historicamente, los sistemas electricos se constituyeron a partir de redes locales de pequena escala que se fueron agregando progresivamente para beneficiarse de los efectos de una demanda mas abundante y de las economias de escala en generacion que autorizan los grandes sistemas interconectados. Esta logica parece actualmente mostrar ciertos limites, los factores que influyen sobre estas tecnologias pueden variar grandemente de un pais al otro, pero se encuentra, sin embargo, a grados diferentes ciertas constantes tales como la busqueda de una confiabilidad mas grande en el aprovisionamiento electrico, la puesta en obra de politicas de prevencion de cambio

Act 13/1986 of 14 April on the development and general co-ordination of scientific and technical research

International Nuclear Information System (INIS)

1986-01-01

The purpose of this Act is to set up new structures in Spain to encourage scientific and technological development. It provides for the establishment of a national plan for scientific research and technological development which must be approved by the Government before submission to Parliament. The Junta de Energia Nuclear is one of the public research organisations designated by the Act to collaborate in the implementation of the plan. It should be noted that in this respect the Junta will be renamed: Centro de Investigacion Energetica, Medio Ambiental y Technologica (Research Centre for Energy, Environment and Technology). (NEA) [fr

Simulation of channel blockage for the IEA-R1 research reactor using RELAP/MOD 3

International Nuclear Information System (INIS)

Oliveira, Eduardo C.F. de; Castrillo, Lazara Silveira

2015-01-01

Research reactors have great importance in the area of nuclear technology, such as radioisotope production, research in nuclear physics, development of new technologies and staff training for reactor operation. The IEA-R1 is a Brazilian research reactor type pool, located at the IPEN (Instituto de Pesquisas Energeticas e Nucleares). In this work is simulated with computer code RELAP5 / MOD 3.3.2 gamma, the effect caused by partial and complete blockage of a channel in MTR fuel element of the IEA-R1 core, in order to analyzed the thermal hydraulic parameters on adjacent channels. (author)

Recovering of thorium contained in wastes from Thorium Purification Plant

International Nuclear Information System (INIS)

Brandao Filho, D.; Hespanhol, E.C.B.; Baba, S.; Miranda, L.E.T.; Araujo, J.A. de.

1992-08-01

A study has been developed in order to establish a chemical process for recovering thorium from wastes produced at the Thorium Purification Plant of the Instituto de Pesquisas Energeticas e Nucleares. The recovery of thorium in this process will be made by means of solvent extraction technique. Solutions of TBP/Varsol were employed as extracting agent during the runs. The influence of thorium concentration in the solution, aqueous phase acidity, volume ratio of the phases, percentage of TBP/Varsol and the contact time of the phases on the extraction of thorium and lanthanides was determined. (author)

Recovering of thorium contained in wastes from Thorium Purification Plant; Reaproveitamento do torio contido em residuos provenientes da Usina de Purificacao do Torio

Energy Technology Data Exchange (ETDEWEB)

Brandao Filho, D; Hespanhol, E C.B.; Baba, S; Miranda, L E.T.; Araujo, J.A. de

1992-08-01

A study has been developed in order to establish a chemical process for recovering thorium from wastes produced at the Thorium Purification Plant of the Instituto de Pesquisas Energeticas e Nucleares. The recovery of thorium in this process will be made by means of solvent extraction technique. Solutions of TBP/Varsol were employed as extracting agent during the runs. The influence of thorium concentration in the solution, aqueous phase acidity, volume ratio of the phases, percentage of TBP/Varsol and the contact time of the phases on the extraction of thorium and lanthanides was determined. (author).

Application of frequency converters in industry; Aplicacion de convertidores de frecuencia en la industria

Energy Technology Data Exchange (ETDEWEB)

Adame Gonzalez, A.; Aguilar Galvan, A. [Ingenieria Energetica Integral, S.A. de C.V. (Mexico)

1997-12-31

Some of the applications of the frequency converters will be analyzed, as well as the parameters to be considered for the feasibility of its application evaluation. It is also described how an energy evaluation is accomplished and finally a series of actions are enlisted conducting to the energy savings. [Espanol] Se presentaran algunas de las aplicaciones de los convertidores de frecuencia. Ademas se indicaran los parametros a registrar para evaluar la factibilidad de aplicacion de los mismos, se describe como ejecutar la evaluacion energetica y finalmente se listan una serie de acciones que conducen a lograr ahorros de energia.

Characterization methods of nuclear fuel materials

International Nuclear Information System (INIS)

Bustillos, O.W.R.; Teixeira, S.R.; Lordello, A.R.; Imakuma, K.; Rodrigues, C.

1980-01-01

In order to organize quality control and quality assurance activities for PWR fuel production, the laboratory of IPEN (Instituto de Pesquisas Energeticas e Nucleares) has developed various chemical and physical methods to be employed for fuel characterization of UO 2 pellets. The techniques developed are the determination of total residual gases by vacuum fusion method, determination of impurity elements by optical spectrography and characterization methods by X-ray diffraction. The development and the implementation of these techniques under the implementation of these techniques under the general scheme of characterization and quality control is the major theme discussed. (E.G.) [pt

Application of frequency converters in industry; Aplicacion de convertidores de frecuencia en la industria

Energy Technology Data Exchange (ETDEWEB)

Adame Gonzalez, A; Aguilar Galvan, A [Ingenieria Energetica Integral, S.A. de C.V. (Mexico)

1998-12-31

Some of the applications of the frequency converters will be analyzed, as well as the parameters to be considered for the feasibility of its application evaluation. It is also described how an energy evaluation is accomplished and finally a series of actions are enlisted conducting to the energy savings. [Espanol] Se presentaran algunas de las aplicaciones de los convertidores de frecuencia. Ademas se indicaran los parametros a registrar para evaluar la factibilidad de aplicacion de los mismos, se describe como ejecutar la evaluacion energetica y finalmente se listan una serie de acciones que conducen a lograr ahorros de energia.

Didactic trainer. Solar photovoltaic panels analysis; Analisis de paneles solares fotovoltaicos

Energy Technology Data Exchange (ETDEWEB)

Rodriguez, J.; Ruiz, J.; Gorjon, J.; Quiles, J. A.; Cavaller, N.; Bodega, J.; Alonso-Abella, M.; Chenlo, F.

2009-07-01

The Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas (CIEMAT) and the Instituto de Ensenanza Secundaria Virgen de la Paloma (IES VP), through their respective Metrology and Electricity-Electronics departments, have established a first agreement of co-operation with the aim of introducing and enhancing the solar photovoltaic energy within the professional teachings field. This agreements is a result of the compromise of designing entirely in the Electricity-electronics department of IES VP a didactic trainer prototype which enables to analyze cells and photovoltaic panels, all under the supervision and logistic-technical support of CIEMAT Photovoltaic Laboratory. (Author)

Simulation of channel blockage for the IEA-R1 research reactor using RELAP/MOD 3

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Eduardo C.F. de; Castrillo, Lazara Silveira, E-mail: ecfoliveira@hotmail.com, E-mail: lazara.castrillo@upe.br [Universidade de Pernambuco (UPE), Recife, PE (Brazil). Escola Politecnica de Pernambuco

2015-07-01

Research reactors have great importance in the area of nuclear technology, such as radioisotope production, research in nuclear physics, development of new technologies and staff training for reactor operation. The IEA-R1 is a Brazilian research reactor type pool, located at the IPEN (Instituto de Pesquisas Energeticas e Nucleares). In this work is simulated with computer code RELAP5 / MOD 3.3.2 gamma, the effect caused by partial and complete blockage of a channel in MTR fuel element of the IEA-R1 core, in order to analyzed the thermal hydraulic parameters on adjacent channels. (author)

Energy analysis of tubular digesters using swine residues; Analise energetica de biodigestores tubulares usando dejetos de suinos

Energy Technology Data Exchange (ETDEWEB)

Campos, Alessandro Torres; Daga, Jacir [Universidade Estadual do Oeste do Parana (UNIOESTE), Marechal Candido Rondon, PR (Brazil). Grupo de Pesquisas em Ambiencia do Oeste do Parana; Campos, Aloisio Torres de [EMBRAPA Gado de Leite, Juiz de Fora, MG (Brazil). Grupo Pesquisador em Educacao Ambiental; Santos, Elenara Pinto dos; Casimiro, Evandro Luiz Nogarolli; Nagae, Ricardo Yuiti; Weiss Filho, Waldemiro [Universidade Estadual do Oeste do Parana (UNIOESTE), Marechal Candido Rondon, PR (Brazil). Centro de Ciecias Agraras

2004-07-01

Overcoming another financial crisis, the swine production has the great challenge, in this and next decades, of also reaching the sustainability in the ecosystem ambit. The Parana State/Brazil west area is known because of it's residues high production, with high pollution level, it possesses the added difficulty of presenting high concentration of animals, inserted in production centers in reduced areas. However, this situation reversion, changing the 'trouble called residue' in a 'energy source solution', by means of digesters, became a reality, with the initiative of some producers and researchers. Present work objective was to evaluate the energy production, by means of the digesters use, as alternative energy co-generation. The work was developed at a commercial farm located at the Parana State west area, with 1,700 sows, in an piglet unit producing, with production of 3,400 piglet per mouth. The studied system is constituted by two parallel digesters, with continuous flow and total capacity of 1,275 m3 per digester, with 30 days of hydraulic retention time. The generated biogas feeds a 4.1 cc engine, with six cylinders, 80 cv, 3,600 rpm, coupled to an generator, that constitutes an 50 kW electric engine. The system promoted a 58% reduction of chemical demand of oxygen. The daily gas production estimated was 208 m3, with production of electric energy of 35.2 kWh per day. For most of the year, the system has the potential of provisioning the farm of electricity for all its needs, promoting economy that is transformed into income for the activity. (author)

Energetic efficiency of the use of desiccant in sugarcane; Eficiencia energetica do uso de dessecante em cana-de-acucar

Energy Technology Data Exchange (ETDEWEB)

Cardoso, Gilda B.C.; Ripoli, Tomaz Caetano C.; Romanelli, Thiago L. [Escola Superior de Agricultura Luiz de Queiroz(ESALQ/USP), Piracicaba, SP (Brazil)], E-mail: gildacardoso@usp.br

2010-07-01

Economically, sugarcane is one of the most important crop in Brazil, showing a great perspective of expansion in the cultivated area. In the last few years the sugarcane mechanical harvested area has increased, causing a series of inconveniences for the system of harvest of the sugarcane, such as: the increase in the percentage of extraneous matter and losses of sugarcane and/or fractions in the field. Due the high value invested in the system of harvest of the sugarcane, the desiccant is one of the alternatives used to minimize such inconveniences in the pre harvest. In order to quantify the demand of energy of the system, the present work used a base of energy pointers as tool for the planning process and production of sugarcane in two systems, one with application of desiccant (T1) and the other without (T2). The energy flows of entrance (EE) and exit had been established, allowing the identification of the energy rocking (BE), that quantifies the liquid profit of energy for area. The results had shown that the application of the desiccant resulted in a bigger EE in system T1 (86601.44 MJ ha{sup -1} versus 83345.45 MJ ha{sup -1}). The BE of T2 presented superior in 0.14% in relation the T1 (2241318.57 MJ ha{sup -1} against 2238062.57 MJ ha{sup -1}), indicating that the desiccant presents greater energy consumption. (author)

Energy analysis of tubular digesters using swine residues; Analise energetica de biodigestores tubulares usando dejetos de suinos

Energy Technology Data Exchange (ETDEWEB)

Campos, Alessandro Torres; Daga, Jacir [Universidade Estadual do Oeste do Parana (UNIOESTE), Marechal Candido Rondon, PR (Brazil). Grupo de Pesquisas em Ambiencia do Oeste do Parana], e-mail: atcampos3@yahoo.com.br; Campos, Aloisio Torres de [EMBRAPA Gado de Leite, Juiz de Fora, MG (Brazil). Grupo Pesquisador em Educacao Ambiental; Santos, Elenara Pinto dos; Casimiro, Evandro Luiz Nogarolli; Nagae, Ricardo Yuiti; Weiss Filho, Waldemiro [Universidade Estadual do Oeste do Parana (UNIOESTE), Marechal Candido Rondon, PR (Brazil). Centro de Ciecias Agraras

2004-07-01

Overcoming another financial crisis, the swine production has the great challenge, in this and next decades, of also reaching the sustainability in the ecosystem ambit. The Parana State/Brazil west area is known because of it's residues high production, with high pollution level, it possesses the added difficulty of presenting high concentration of animals, inserted in production centers in reduced areas. However, this situation reversion, changing the 'trouble called residue' in a 'energy source solution', by means of digesters, became a reality, with the initiative of some producers and researchers. Present work objective was to evaluate the energy production, by means of the digesters use, as alternative energy co-generation. The work was developed at a commercial farm located at the Parana State west area, with 1,700 sows, in an piglet unit producing, with production of 3,400 piglet per mouth. The studied system is constituted by two parallel digesters, with continuous flow and total capacity of 1,275 m3 per digester, with 30 days of hydraulic retention time. The generated biogas feeds a 4.1 cc engine, with six cylinders, 80 cv, 3,600 rpm, coupled to an generator, that constitutes an 50 kW electric engine. The system promoted a 58% reduction of chemical demand of oxygen. The daily gas production estimated was 208 m3, with production of electric energy of 35.2 kWh per day. For most of the year, the system has the potential of provisioning the farm of electricity for all its needs, promoting economy that is transformed into income for the activity. (author)

Application of exergy balances for the analysis of an oil plant; Aplicacion de balances de exergia para el analisis de una planta de petroleo

Energy Technology Data Exchange (ETDEWEB)

Rodriguez Toral, Miguel Angel; Rangel Davalos, Humberto [Instituto Mexicano del Petroleo (Mexico)

1996-07-01

The Mexican oil industry requires of the technological modernization, for this purpose it is planning the optimization of its operations of primary production, among which it stands out the separation and the stabilization. These operations take place in an oil complex which has been planned to be installed in the Mexican Southeastern. This paper shows some of the advances in the installation of the complex of separation, compression and stabilization of crude oil, which was analyzed at the light of the concepts of energy saving and of the second law of thermodynamics. [Spanish] La industria petrolera mexicana requiere de modernizacion tecnologica, para ello se esta planeando la optimizacion de sus operaciones de produccion primaria, entre las que destaca la separacion y estabilizacion. Dichas operaciones se efectuan en un complejo petrolero, mismo que se tiene planeado instalar en el sureste mexicano. Este trabajo muestra algunos de los avances en la instalacion del complejo de separacion, compresion y estabilizacion de petroleo crudo, el cual se analizo a la luz de los conceptos de ahorro de energia y de la segunda ley de la termodinamica.

Environmental system applied to radioactive liquid effluent release

International Nuclear Information System (INIS)

Nisti, Marcelo Bessa

2009-01-01

The current environmental administration considers the productive activity as an environmental system, defined as a group of processes, interactions, parameters and factors involved in the production. This mastering dissertation evaluated the release of the liquid radioactive effluents at Instituto de Pesquisas Energeticas e Nucleares (IPEN), under a systemic environmental study. The study evaluated the source term at IPEN in the period from 2004 to 2008, making use of gamma-ray and alpha spectrometry, instrumental neutron activation analysis, liquid phase scintillation and atomic absorption spectrometry. The employed methodologies were verified using samples from the Intercomparison National Program - PNI/IRD and Reference Materials. The facilities that contributed the most in these releases were the Radiopharmaceutical Center (CR) and the Research Reactor Center (CRPq) with an average of 11,4% and 87,4%, respectively, relative to the present radioactive activity. The sewer system releases were within the radioactive protection regulations, showing the effectiveness of IPEN's Radioactive Effluents Monitoring Program. The concentration of the stable elements Ag, Cd, Cr, Fe, Mn, Ni, Pb and Zn was determined in the liquid effluent in ali the samples from the storage tanks TR1 and CR in the period from 2004 to 2008 and in some of the samples of other IPEN's facilities in the period from 2004 to 2007. Among the analyzed effluents, two samples were higher than the stable elements discharge standards established in the state of Sao Paulo, one sample was higher than the required value of the element cadmium and the other higher than required value of the element zinco The storage tank TR1 discharge flow was estimated in 10,9 ± 0,9 m3 h -1 . The dilution factor at discharge point E1 was estimated using a radiotracers the isotopes 3 H, 137 CS, 60 Co, 54 Mn and 65 Zn, which are commonly released into IPEN's sewer system. The executed radiotracer study was carried out

Computerized system for energy diagnosis in domestic users; Sistema computarizado para diagnostico energetico en usuarios domesticos

Energy Technology Data Exchange (ETDEWEB)

Ramos N, Gaudencio; Heard, Cristopher; Fiscal E, Raul; Maqueda Z, Martin [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

The scope of a computerized system is presented to make an energy diagnosis to homes and a simulation of scenarios of cost/benefit, due to the implementation of energy saving measures and the efficient use of electrical energy. The FIPATERM (trust for the heat insulation of the house in Mexicali), provides economic and technical support so that the domestic users diminish their expense for the electrical energy, implementing programs of Demand Side Management (DSM). The current effective programs are: thermal insulation, substitution of the existent air conditioning units for efficient ones, reduction of infiltration, leveled plan of payments, interruption of the air conditioning equipment. In order to participate in one or several of the programs of energy efficiency, an energy diagnosis is made to the user. It is from a survey of the equipment and characteristics of the house, as well as a description on the part of the user of his habits of use of the equipment, that scenarios are simulated, which allow the user to identify the most profitable measures. [Spanish] Se presenta el alcance de un sistema computarizado para realizar diagnostico energetico a casas habitacion y simulacion de escenarios de beneficio/costo, debido a la implantacion de medidas de ahorro y uso eficiente de energia electrica. El FIPATERM (fideicomiso para el aislamiento termico de la vivienda en Mexicali), proporciona apoyo economico y tecnico para que los usuarios domesticos minimicen su gasto de energia electrica, implementando programas de Administracion por el Lado de la Demanda (ALD). Los programas actualmente vigentes son: aislamiento termico, sustitucion del aire acondicionado actual por uno eficiente, reduccion de infiltracion, plan nivelado de pagos, interrupcion del equipo de aire acondicionado. Para participar en uno o varios de los programas de eficiencia energetica, al usuario se le realiza un diagnostico energetico. Es a partir de una encuesta del equipamiento y caracteristicas

Preliminary experimental results of barium chloride-ammonia reaction for using in a solar thermochemical cooling cycle; Resultados experimentales preliminares de la reaccion entre el cloruro de bario y el amoniaco para su utilizacion en un ciclo de refrigeracion solar termoquimico

Energy Technology Data Exchange (ETDEWEB)

Rivera, C. O. B.; Mendez, E. R.; Pilatowsky, L. F.; Rivera, W. G.

2004-07-01

An experimental intermittent thermochemical refrigeration system operating with barium chloride-ammonia reaction is described. The barium chloride is used as absorbent and ammonia as refrigerant. The equipment components and the experimental preliminary results are also presented. The temperature range of the thermal fluid from 70 C to 95 C was established. The main results showed that the generation temperature oscillated from 53 C to 56 C for a condensation temperature of 23 C. The generation pressure range was from 10 to 11 bar. In the evaporating-absorption process, the evaporating temperature range was between 10 C and 0 C for a saturation pressure of 2.4 bar. The results showed also, the technical feasibility to operate this refrigeration system with low cost solar flat plate collectors in remote areas. (Author) CIEMAT (Centro de Investigaciones Energeticas, Mediambientales y Tecnologicas). The LCA is an environmental management methodology with which the environmental impacts associate to a system, process product are detected. The ISO standard 14040: 1997 contain the procedure to follow. life cycle of the plant is divided in 4 stages: extraction and transformation of raw materials; transport and installation; completion of the system to operate like a steam generator maintenance, and dismantling. As result, some improvements are recommended, mainly related to changes in the types of materials and the treatment of the emissions. (Author)

Energy balance of the metropolitan zone of the valley of Mexico, methodology and the entailment energy-air quality; Balance de energia de la zona metropolitana del valle de Mexico metodologia y la vinculacion energia - calidad del aire

Energy Technology Data Exchange (ETDEWEB)

Bazan Navarrete, Gerardo [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

2001-07-01

The present document raises a methodology for the elaboration of the Energy Balance of the Metropolitan Zone of the Valley of Mexico (ZMVM), in order to unify criteria and to facilitate the work of entities and investigators, mainly of those that require the entailment of energy and environment. The applied methodology, the consolidated format and the caloric unity facilitates the insertion of the Energy Balance of the ZMVM within the National Balance of Energy. The regional balances of energy have the intention of knowing the energy consumption patterns in the ZMVM and the indexes of energy intensity by sector. They establish the relationship of the indexes of energy intensity with the local and global air quality of the region, performing studies of incidence with the main polluting agents and with the greenhouse effect gases. [Spanish] El presente documento plantea una metodologia para la elaboracion del Balance de Energia de la Zona Metropolitana del Valle de Mexico (ZMVM), con el proposito de unificar criterios y facilitar el trabajo de organismos e investigadores, sobre todo de aquellos que requieren vincular energia y medio ambiente. La metodologia aplicad, el formato consolidado y la unidad calorica facilitan la insercion del Balance de Energia de la ZMVM dentro del Balance Nacional de Energia. Los balances regionales de energia tienen el proposito de conocer los patrones de consumo de energia en la ZMVM y los indices de intensidad energetica por sector. Establecen la relacion de los indices de intensidad energetica con la calidad del aire local y global de la region, realizando estudios de incidencia con los principales contaminantes y con los gases de efecto invernadero.

Hydropower Resource Assessment of Brazilian Streams

Energy Technology Data Exchange (ETDEWEB)

Douglas G. Hall

2011-09-01

The Idaho National Laboratory (INL) in collaboration with the U.S. Geological Survey (USGS) with the assistance of the Empresa de Pesquisa Energetica (EPE) and the Agencia Nacional de Energia Electrica (ANEEL) has performed a comprehensive assessment of the hydropower potential of all Brazilian natural streams. The methodology by which the assessment was performed is described. The results of the assessment are presented including an estimate of the hydropower potential for all of Brazil, and the spatial distribution of hydropower potential thus providing results on a state by state basis. The assessment results have been incorporated into a geographic information system (GIS) application for the Internet called the Virtual Hydropower Prospector do Brasil. VHP do Brasil displays potential hydropower sites on a map of Brazil in the context of topography and hydrography, existing power and transportation infrastructure, populated places and political boundaries, and land use. The features of the application, which includes tools for finding and selecting potential hydropower sites and other features and displaying their attributes, is fully described.

Numerical analysis of the fluid dynamics in a natural circulation loop

International Nuclear Information System (INIS)

Angelo, Gabriel

2013-01-01

Natural circulation loops apply to many engineering applications such as: water heating solar energy system (thermo-siphons), thermal management of electrical components (voltage converter), geothermal energy, nuclear reactors, etc. In pressurized water nuclear reactors, known as PWR's, the natural circulation loops are employed to ensure passive safety. In critical situations, the heat transfer will occur only by natural convection, without any external control or mechanical devices. This feature is desired and has been considered in modern nuclear reactor projects. This work consists of a numerical study of the natural circulation loop, located at the Instituto de Pesquisas Energeticas e Nucleares / Comissao Nacional de Energia Nuclear in Sao Paulo, Brazil, in order to establish the flow pattern in single phase conditions. The comparison of numerical results to experiments in transient condition revealed significant deviations for the Zero Equation turbulence model. Intermediate deviations for the Eddy Viscosity Turbulence Equation (EVTE), k - ω, SST e SSG models. And the best results are obtained by the k - ε e DES models (with better results for the k - ε model). (author)

Monte Carlo analysis of the Neutron Standards Laboratory of the CIEMAT; Analisis Monte Carlo del Laboratorio de Patrones Neutronicos del CIEMAT

Energy Technology Data Exchange (ETDEWEB)

Vega C, H. R. [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas (Mexico); Mendez V, R. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas, Av. Complutense 40, 28040 Madrid (Spain); Guzman G, K. A., E-mail: fermineutron@yahoo.com [Universidad Politecnica de Madrid, Departamento de Ingenieria Nuclear, C. Jose Gutierrez Abascal 2, 28006 Madrid (Spain)

2014-10-15

By means of Monte Carlo methods was characterized the neutrons field produced by calibration sources in the Neutron Standards Laboratory of the Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas (CIEMAT). The laboratory has two neutron calibration sources: {sup 241}AmBe and {sup 252}Cf which are stored in a water pool and are placed on the calibration bench using controlled systems at distance. To characterize the neutrons field was built a three-dimensional model of the room where it was included the stainless steel bench, the irradiation table and the storage pool. The sources model included double encapsulated of steel, as cladding. With the purpose of determining the effect that produces the presence of the different components of the room, during the characterization the neutrons spectra, the total flow and the rapidity of environmental equivalent dose to 100 cm of the source were considered. The presence of the walls, floor and ceiling of the room is causing the most modification in the spectra and the integral values of the flow and the rapidity of environmental equivalent dose. (Author)

Numerical analysis of the fluid dynamics in a natural circulation loop; Analise numerica da dinamica do escoamento em circuitos de circulacao natural

Energy Technology Data Exchange (ETDEWEB)

Angelo, Gabriel

2013-07-01

Natural circulation loops apply to many engineering applications such as: water heating solar energy system (thermo-siphons), thermal management of electrical components (voltage converter), geothermal energy, nuclear reactors, etc. In pressurized water nuclear reactors, known as PWR's, the natural circulation loops are employed to ensure passive safety. In critical situations, the heat transfer will occur only by natural convection, without any external control or mechanical devices. This feature is desired and has been considered in modern nuclear reactor projects. This work consists of a numerical study of the natural circulation loop, located at the Instituto de Pesquisas Energeticas e Nucleares / Comissao Nacional de Energia Nuclear in Sao Paulo, Brazil, in order to establish the flow pattern in single phase conditions. The comparison of numerical results to experiments in transient condition revealed significant deviations for the Zero Equation turbulence model. Intermediate deviations for the Eddy Viscosity Turbulence Equation (EVTE), k - {omega}, SST e SSG models. And the best results are obtained by the k - {epsilon} e DES models (with better results for the k - {epsilon} model). (author)

Simulation and evaluation of mammography quality from an X-ray equipment of a instrument calibration laboratory; Simulacao e avaliacao das qualidades da mamografia do equipamento de raios-x de um laboratorio de calibracao de instrumentos

Energy Technology Data Exchange (ETDEWEB)

Silva, Natalia F. da; Castro, Maysa C. de; Caldas, Linda V.E., E-mail: na.fiorini@gmail.com, E-mail: maysadecastro@gmail.com, E-mail: lcaldas@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2014-07-01

The Instrument Calibration Laboratory (ICL) of the Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP, Brazil has developed some work in order to establish a primary standard system for low energy X-ray employing a ionization chamber of free air. For this, one of the most important steps is the determination of factors of correction of its answer. Simulation is a frequently used tool for this because some correction factors can not be determined experimentally. For the correct simulation of these correction factors is necessary some input parameters such as geometry, the material composition of the dosimeter, the experimental arrangement and the radiation source are specified correctly. For the ionization chamber available on the LCI, the geometry, the material components and the experimental arrangement can be obtained easily. On the other hand, spectrum of radiation energy source, which must be inserted into the computer code has not been obtained. Thus, this study aims to determine this radiation spectrum, thus enabling the characterization of the new primary standard for low power X-radiation of ICL.

Monte Carlo analysis of the Neutron Standards Laboratory of the CIEMAT

International Nuclear Information System (INIS)

Vega C, H. R.; Mendez V, R.; Guzman G, K. A.

2014-10-01

By means of Monte Carlo methods was characterized the neutrons field produced by calibration sources in the Neutron Standards Laboratory of the Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas (CIEMAT). The laboratory has two neutron calibration sources: 241 AmBe and 252 Cf which are stored in a water pool and are placed on the calibration bench using controlled systems at distance. To characterize the neutrons field was built a three-dimensional model of the room where it was included the stainless steel bench, the irradiation table and the storage pool. The sources model included double encapsulated of steel, as cladding. With the purpose of determining the effect that produces the presence of the different components of the room, during the characterization the neutrons spectra, the total flow and the rapidity of environmental equivalent dose to 100 cm of the source were considered. The presence of the walls, floor and ceiling of the room is causing the most modification in the spectra and the integral values of the flow and the rapidity of environmental equivalent dose. (Author)

ANALISI ENERGETICA DI CANTIERI DI MECCANIZZAZIONE LEGGERA PER L’UTILIZZAZIONE DI UN CEDUO DI EUCALIPTO

Directory of Open Access Journals (Sweden)

Sanzio Baldini

2007-09-01

Full Text Available The work was turned near Crotone (KR, in a 20 year-old plantation of Eucalyptus occidentalis Endl. positioned in hill zones, with average slope next to 27%. The utilisation system was the Full Tree System (FTS. The felling on the six yards has been done by chainsaw and the first coppice bunching was manual. fts 1, 2 - The extraction has been done by one drum forest winch applied to the three point hitch of a wheeled farm tractor forest version. fts 3, 4 - The extraction has been done by two drums forest winch, applied to the three point hitch of a wheeled farm tractor forest version. fts 5,6 - The extraction has been done by light tower yarder powered by one drum forest winch applied to the three point hitch of a wheeled farm tractor forest version. fts 1, 3 and 5 - At the landing the coppice have been processed by chainsaw in 2 meters length trunks. The slash accumulated and the trunks staked manually. fts 2, 4 and 6 - At the landing the coppice have been chipped by drum chipper with manual feed. The machine was a tractor powered chipper. At the landing the wood has been differentiated in two types. The type from the yards “fts 1,3,5” were 2 meters length trunks and the other type from the yards “fts 2,4,6” were chips for energy production. For the 2 meters length trunks the transport has been done by truck with 16 t of load capacity, and hydraulic crane. This material at the staple will be chipping by drum chipper with autonomous engine and mechanical feed. The chips transport will be done by truck with 17 t of load capacity. From the working times analysis and the wood quantitative obtained we studied the energy balance in the yards. We used the GER (Goss Energy Requirement method. From the results obtained, the best work methodology seems to be that of full trees chipping directly at the landing and the chips transport at the staple. For the bunching and the extraction the best productivity result is given from the tractor with one

Development of the process of boron electrophoresis deposition on aluminum substate to be used in the construction of neutron detectors

International Nuclear Information System (INIS)

Oliveira Sampa, M.H. de; Vinhas, L.A.

1989-11-01

Process of baron electrophoresis depositon on large areas of aluminum substrates was developed with the aim of using them in the construction of neutron detectors. After definition and optimization of the boron electrophoresis parameters, depositions of 10 B on aluminium cylinders were performed and used as electrodes in gamma compensated and non-compensated ionization chambers and in proportional detectors. Prototypers of ionization chambers were designed, built and assembled at the Departinent for Engineering and Industry Application (TE) of the Instituto de Pesquisas Energeticas e Nucleares (IPEN), and submited for characterization tests at IEA-R1 reactor. They fully met the technical specifications of the projects. (author) [pt

Public acceptance of nuclear energy

International Nuclear Information System (INIS)

Reis, J.S.B.

1984-01-01

Man, being unacquainted with the advantages of Nuclear Energy associates it with the manufacture of weaponry. However, the benefits of Nuclear Energy is received daily. In Brazil the public has not taken an anti-nuclear position; it is recognized that the Nuclear Plan exists exclusively for peaceful purposes and the authorities keep the community well informed. The Comision Nacional de Energia Nuclear along with the Instituto de Radioproteccion y Dosimetria, Instituto de Ingenieria Nuclear and the Instituto de Investigaciones Energeticas y Nucleares has developed in 27 years of existence, a gradual, accute and effective long term programme for the formation of potentially receptive opinion of Nuclear Energy. (Author)

Uranium density reduction on fuel element side plates assessment

International Nuclear Information System (INIS)

Rios, Ilka A.; Andrade, Delvonei A.; Domingos, Douglas B.; Umbehaun, Pedro E.

2011-01-01

During operation of IEA-R1 research reactor, located at Instituto de Pesquisas Energeticas e Nucleares, IPEN - CNEN/SP, an abnormal oxidation on some fuel elements was noted. It was also verified, among the possible causes of the problem, that the most likely one was insufficient cooling of the elements in the core. One of the propositions to solve or minimize the problem is to reduce uranium density on fuel elements side plates. In this paper, the influence of this change on neutronic and thermal hydraulic parameters for IEA-R1 reactor is verified by simulations with the codes HAMMER and CITATION. Results are presented and discussed. (author)

Notes for a procedure of certification of thermal solar facilities; Apuntes para un procedimiento de certificacion de instalaciones solares termicas

Energy Technology Data Exchange (ETDEWEB)

Prieto, J. I.; Garcia, D.

2008-07-01

A procedure to evaluate the quality of solar thermal installations is proposed, following some analogy to the Calificacion Energetica de Viviendas (C.E.V.) method. The steps required to develop the method are established, analysing with special detail the stage of design-based qualification. The proposed procedures of energy saving qualification, architectural qualification, and economical qualification, are justified. Moreover, the report suggests a list of previous data that must be provided and periodically updated by the Administration to guarantee both the objectivity and the transparency of the qualification procedure. The exposure of the method is complemented with numerical and graphical application to several case studies. (Author)

Uranium density reduction on fuel element side plates assessment

Energy Technology Data Exchange (ETDEWEB)

Rios, Ilka A. [Centro Tecnologico da Marinha em Sao Paulo (CTMSP), Sao Paulo, SP (Brazil); Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Andrade, Delvonei A.; Domingos, Douglas B.; Umbehaun, Pedro E. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2011-07-01

During operation of IEA-R1 research reactor, located at Instituto de Pesquisas Energeticas e Nucleares, IPEN - CNEN/SP, an abnormal oxidation on some fuel elements was noted. It was also verified, among the possible causes of the problem, that the most likely one was insufficient cooling of the elements in the core. One of the propositions to solve or minimize the problem is to reduce uranium density on fuel elements side plates. In this paper, the influence of this change on neutronic and thermal hydraulic parameters for IEA-R1 reactor is verified by simulations with the codes HAMMER and CITATION. Results are presented and discussed. (author)

A rapid appraisal process on an irrigation system in Pakistan; Evaluacion rapida de una zona de riego tipica de Pakistan

Energy Technology Data Exchange (ETDEWEB)

Ruiz-Carmona, Victor Manuel; Ojeda-Bustamante, Waldo [Instituto Mexicano de Tecnologia del Agua, Jiutepec, Morelos (Mexico); Contijoch, Manuel [Banco Mundial (Mexico)

2006-07-15

This paper presents the results obtained on the implementation of a rapid appraisal process on an irrigation system in the province of Punjab in Pakistan. The purpose of the evaluation was to know the present irrigation service quality and to propose some alternative to improve it. The evaluation results were: the canal inflow is smaller than peak crop water requirement; net aquifer loss; crops are always under stress which is reflected on low crop yields, the secondary canal network has not control structures and was not designed for rotation, insufficient human-human communication between canal operators; the operators have no complementary training course to enhance their capacity; discrepancy between the service the canal is supposed to provide and the real service it offers. The suggested actions to improve the irrigation service were: the irrigation service must be client oriented; the irrigation users should participate to determine the irrigation service characteristics; the difference between actual and stage irrigation service must be eliminated; clear definition on water allocation; implement a modernization program to provide the irrigation service required. The evaluation methodology used can be applied in other countries like Mexico for the analysis of large irrigation systems making an optimal use of time and resources. [Spanish] En el presente trabajo se muestran los resultados obtenidos al aplicar una metodologia de evaluacion rapida de sistemas de riego a una zona de la provincia del Punjab, Pakistan. El objetivo de la evaluacion fue conocer el estado actual del servicio de riego que ofrece la agencia responsable del manejo del riego en un distrito del Punjab y proponer alternativas para mejorarlo. Los principales resultados de esta evaluacion fueron los siguientes: la falta de capacidad de los canales, el abatimiento neto del acuifero; el estres hidrico continuo de los cultivos, que propicia un bajo rendimiento; la red secundaria de canales no

Analysis of energetic efficiency in stenters of textile industry; Analise de eficiencia energetica em ramas de industria textil

Energy Technology Data Exchange (ETDEWEB)

Machado, Antonio Rogerio; Ferraz, Andre; Rocha, Ivan; Azevedo, Jorge; Oshiro, Hugo K.; Konishi, Ricardo; Piazza, Walter; Lehmkuhl, Willian [Companhia de Gas de Santa Catarina (SCGAS), Florianopolis, SC (Brazil)

2011-12-21

This paper presents the research on the use of alternative energy within the textile industry: a strategy aimed at reducing costs and securing market share. The use of natural gas allows for the direct heating and drying of textiles through convection, instead of the conventional indirect heating method of thermal fluids. This measure alone reduces significantly the energy costs and grants the process superior efficiency and sustainability. This case examines the improvements to the process of drying textiles through thermal equipment called stenters, whose purpose is to remove humidity from the cloth during its fabrication. As such, SCGAS, in association with FURB, has performed an operational and technological evaluation of the drying process used by a customer enterprise. The data collected enabled the researchers to map all sources (inputs and outputs) of mass and energy for each different stenter. This composed the basis for the analysis done and the subsequent proposal of improvements, which varied from the conversion of stenter from indirect to direct heating and the development of even more energy efficient solutions for the direct heating system. The data obtained shows that, for the indirect heating system, 28% of the thermal energy produced could be recovered, given the temperature of the exhaust gases reached 360 deg C. The indirect heating stenters presented energy efficiency between 24% and 27%, whiles the direct heating ones presented between 27,4% and 34,8%. Additionally, if an automated control system for the natural gas and oxidizing air flows was to be installed, it would guarantee greater quality combustion with a significant increase in energy efficiency, as well as a decrease in carbon monoxide emissions by a factor of eight. (author)

Energy analysis in Cynodon dactylon (L.) Pers hay production; Analise energetica na producao de feno de Cynodon dactylon (L.) Pers

Energy Technology Data Exchange (ETDEWEB)

Campos, Alessandro T. [UNIOESTE, Marechal Candido Rondon, PR (Brazil). Centro de Ciencias Agrarias]. E-mail: atcampos3@yahoo.com.br; Saglietti, Jose R.C.; Bueno, Osmar C. [UNESP, Botucatu, SP (Brazil). Facudade de Ciencias Agronomicas; Campos, Aloisio T. [EMBRAPA - Gado de leite, Juiz de Fora, MG (Brazil)

2005-05-15

The aim of this work was to characterize the energy consumption related to the introduction, development, hay processing and storage of Cynodon dactylon (L.) Pers allied to the analysis of the energetic efficiency. The data used in this project were collected from EMBRAPA Gado de Leite, localized in Coronel Pacheco, Minas Gerais, Brazil. The data were obtained from a seven year period of an intensive system of milk production. Energetic coefficients were used to generate the survey and several matrix components obtained from pertinent literature. The direct energy, related to the inputs, showed more efficient participation on the energetic matrix than the indirect energy and the percentages were 94.64 and 5.31, respectively. Farm tractor was the main indirect energy consumer, which is responsible for turning on all the equipment, followed by the irrigation system. The energetic efficiency presented by the whole system was 4.2, being considered positive and demonstrating that the agriculture ecosystem is sustainable. Most of the direct energy employed in this system was oil derived on fuel form. There was, however, a great consume of another oil derived energy such as fertilizer, but mainly on the nitrogen form (28.89% of the total employed energy). (author)

Possible sources for hydrogen production in Mexico; Posibles fuentes de produccion de hidrogeno en Mexico

Energy Technology Data Exchange (ETDEWEB)

Vazquez Esparza Mata, Esther; Perez Garcia, Edgar C. [Facultad de Ingenieria, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

2004-06-15

combustibles fosiles, a esta etapa podemos denominar periodo de transicion energetica cuando se termine este lapso de tiempo tendremos una eminente crisis energetica y sera necesario contar ya con nuevas alternativas energeticas, las cuales tengan un desarrollo sustentable y las cuales deberan de estar listas al termino de los proximos 20 anos. Una de las alternativas mas viables es la obtencion de energia a partir del hidrogeno, este es el elemento mas abundante en el universo, cerca del 75% esta constituido por el, pero no se encuentra en estado puro en la naturaleza. Para determinar cierto estado es necesario investigar acerca de los procesos para la obtencion de hidrogeno, la reformacion del gas natural, las reservas de gas natural, la distribucion de gas natural y la gasificacion integrada.

Optimization procedures in mammography: First results; Procesos de Optimizacion en Mamografia. Primeros Resultados

Energy Technology Data Exchange (ETDEWEB)

Espana Lopez, M. L.; Marcos de Paz, L.; Martin Rincon, C.; Jerez Sainz, I.; Lopez Franco, M. P. [Hospital Universitario de La Princesa. Madrid (Spain)

2001-07-01

Optimization procedures in mammography using equipment with a unique target/filter combination can be carried out through such diverse factors as target optical density, technique factors for exposure, screen film combination or processing cycle, in order to obtain an image adequate for the diagnosis with an acceptable risk benefit balance. Diverse studies show an increase in the Standardised Detection Rate of invasive carcinomas with an increase in the optical density among others factors. In our hospital an optimisation process has been established, and as previous step, the target optical density has been increased up to 1,4 DO. The aim of this paper is to value the impact of optical density variation as much in the quality of image as in the entrance surface dose and the average dose to the glandular tissue, comparing them with the results obtained in a previous study. The study has been carried out in a sample of 106 patients, with an average age of 53,4 years, considering 212 clinical images corresponding to the two projections of a same breast with an average compressed thickness of 4,86 cm. An increase of 16,6% on the entrance surface dose and 18% on the average dose to the glandular tissue has been recorded. All the clinical images has been evaluated for the physician as adequate for diagnosis. (Author) 16 refs.

Search Greedy for radial fuel optimization; Busqueda Greddy para optimizacion radial de combustible

Energy Technology Data Exchange (ETDEWEB)

Ortiz, J. J.; Castillo, J. A. [ININ, 52750 La Marquesa, Estado de Mexico (Mexico); Pelta, D. A. [Universidad de Granada, ETS Ingenieria Informatica y Telecomunicaciones, C/Daniel Saucedo Aranda s/n, 18071 Granada (Spain)]. e-mail: jjortiz@nuclear.inin.mx

2008-07-01

In this work a search algorithm Greedy is presented for the optimization of fuel cells in reactors BWR. As first phase a study was made of sensibility of the Factor of Pick of Local Power (FPPL) of the cell, in function of the exchange of the content of two fuel rods. His way it could settle down that then the rods to exchange do not contain gadolinium, small changes take place in the value of the FPPL of the cell. This knowledge was applied later in the search Greedy to optimize fuel cell. Exchanges of rods with gadolinium takes as a mechanism of global search and exchanges of rods without gadolinium takes as a method of local search. It worked with a cell of 10x10 rods and 2 circular water channels in center of the same one. From an inventory of enrichments of uranium and concentrations of given gadolinium and one distribution of well-known enrichments; the techniques finds good solutions that the FPPL minimizes, maintaining the factor of multiplication of neutrons in a range appropriate of values. In the low part of the assembly of a lot of recharge of a cycle of 18 months the cells were placed. The values of FPPL of the opposing cells are similar or smaller to those of the original cell and with behaviors in the nucleus also comparable to those obtained with the original cell. The evaluation of the cells was made with the code of transport CASMO-IV and the evaluation of the nucleus was made by means of the one simulator of the nucleus SIMULATE-3. (Author)

Energy management in wooden industry; Gestao energetica em industrias madeireiras

Energy Technology Data Exchange (ETDEWEB)

Cagnon, Jose Angelo; Valarelli, Ivaldo de Domenico; Rodrigues, Ricardo Martini [Universidade Estadual Paulista (UNESP), Bauru, SP (Brazil). Fac. de Engenharia. Dept. de Engenharia Eletrica], Emails: jacagnon@feb.unesp.br, ivaldo@feb.unesp.br, martini@feb.unesp.br

2006-07-01

The objective of this work is the use of a methodology developed for the evaluation of the energy performance in wooden plants, aiming the application of a energy management program, for products and processes improvement, observing a reliable technical and economic implementation. (author)

Energetic technologies and environmental impact; Tecnologias Energeticas e Impacto Ambiental

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

This monograph is a collective work by scientist from CIEMAT (Spanish centre for research on energy, environment and technology). By reviewing the central topics of their own work, the authors present a world-wide update of the state of the arts of the different technologies involved in energy production. The chapters fo through the more promising technologies related to the diverse energy sources, from the nuclear to the renewable and chemical a large gamut of energy supply ways is revised. The analysis of the production technologies is axxompanied by considerations of the environemental implications, an aspect to wich a whole part of the volume is devoted. The book begins with a foreword by Dr. Felix Yndurain, former General Director of CIEMAT and follows with a general introduction to the main topics, that are presented in three parts, with specific introductions. There is also a closing fourth part that includes some additional activities where more basic and technical developments are included. The first part is devoted to energy os nuclear origin. In two separate sections, fission and fusion technologies are covered. The fission section points towards the present day problems of nuclear plants (ageing, accidents, risk analysis, etc.), reprocessing of the nuclear fuel, raioactive wates and environmental radioactivity. The fusion section contains a critical account of the present and expected developments of the fusion reactors together with an exposition of the related plasma physics problems. The second part comprises two sections devoted to energy generation of renewable and chemical origin, respectively. Tehcnologies for solar, wind and biomass energies are thoroughly exposed along the renewable energy section whereas the chemical energy section is devoted to the modern technologies of clean fossil fuel combustion and gasification, as well as to the new appealing subject of direct electric generation with fuel cells. The main environmental ans social issues are compiled in the third part. There is a section devoted to plant emission and atmospheric pollution, a second section on the effects of chemical pollutants on living beings and a last chapter on the social costs of the energy production. Finally, the forth part collects some activities related to information theory, high energy physics, superconductivity and radiation metrology.

Wrong directions of the energetic policy; Descaminhos da politica energetica

Energy Technology Data Exchange (ETDEWEB)

Carvalho, Joaquim Francisco

1997-12-31

The energetic planning should take an important role in the formulation of the economic and social development policy of any country. This work presents the opinion of the author in relation to this issue in what concerns the Brazilian experience. Several actions considered wrong by the author, which were taken by the government in what concerns energetic policy are presented and their expected consequences in the near future are discussed 6 refs., 1 tab.

Energetic evaluation: public schools sector; Avaliacao energetica: setor escolas publicas

Energy Technology Data Exchange (ETDEWEB)

Jota, Patricia Romeiro da Silva; Ribeiro, Mariane Correa; Martins, Fernando Henrique Dias; Silva, Valeria R. Borges da [Centro Federal de Educacao Tecnologica de Minas Gerais (CEFET-MG), Belo Horizonte, MG (Brazil). Centro de Pesquisa em Energia Inteligente

2010-07-01

Energy consumption evaluation at schools is very important for school management. However, there is a great difference among consumption rates, and a simplified analysis would lead to wrong evaluation. It is not possible to analyze schools that have different number of students or different sizes, unless these variables are applied. This article proposes a methodology in order to develop a sector analysis taking into account operation features. A case study is presented to illustrate this methodology. (author)

Energetic characterization of Amazonian biomass; Caracterizacao energetica de biomassas amazonicas

Energy Technology Data Exchange (ETDEWEB)

Feitosa Netto, Genesio Batista; Oliveira, Antonio Geraldo de Paula; Coutinho, Hebert Willian Martins; Nogueira, Manoel Fernandes Martins; Rendeiro, Goncalo [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Dept. de Engenharia Mecanica

2006-07-01

In order to asses the potentiality of Amazon biomasses to generate power, either to supply electric energy to the grid or as fuel to plants supplying power for off-grid location, data for their proximate analysis must be available. A literature review on the subject indicated a lack of information and data concerning typical Amazon rain forest species. This work aimed to characterize (proximate analysis) 43 Amazon species in order to evaluate the energy resource from woody biomass wastes in Amazon region. Higher heating value, carbon, volatile and ash contents were measured in a dry basis. The measurements were performed obeying the following Brazilian standards, NBR 6923, NBR 8112, NBR 8633, NBR 6922. (author)

Design and optimization of electronics associated with a new system detector for verification of complex treatments of radiotherapy; Diseno y optimizacion de la electronica asociada a un nuevo sistema detector para verificacion de tratamientos complejos de radioterapia

Energy Technology Data Exchange (ETDEWEB)

Ovejero, M. C.; Perez Vega-Leal, A.; Nunez Martinez, R.; Espino, J. M.; Arrans, R.; Gallardo, M. I.; Abou-Haidar, Z.; Alvarez, M. A. G.; Cortes Giraldo, M. A.

2013-07-01

After the promising results obtained in the project {sup R}adio{sup ,} a review of system design has been taken in order to improve the results. This work is the study of the response of the system of data acquisition based on the characteristics of the element inclusive of the current generated by the radiation. The goal is to optimize the charging curve of the condenser for applied radiation. (Author)

Composting of domestic wastes: development and optimization of reactor continuous; Compostaje domestico : desarrollo y optimizacion de un reactor en continuo

Energy Technology Data Exchange (ETDEWEB)

Rad, C.; Gonzalez-Carcedo, S.; Revenga, J. M.; Bustillo-Nunez, J. M.; Marcos-Naveira, L. A. [Universidad de Burgos (Spain); Monje, J. C.; Bustillo-Iglesias, A.

2002-07-01

In this work, a mixture of the organic fraction of a domestic waste and wooden chips has been composted using an in vessel composting apparatus with forced aeration and a continuous compost collection system. After three months with a daily addition of a fixed organic charge,temperature and moisture control, five samples of compost were collected and tested in their chemical and biological characteristics. Odour production and low temperatures and moisture contents during the process,high saline concentration and the presence of pathogenic microorganisms in the final product are the main disadvantages of this experience. Although, a good C/N ratio, neutral pH and high levels of nutrients (N and P) in the compost have been achieved,the parameters controlling the process must be improved. (Author) 16 refs.

Optimization of the Starting by compressed air techniques; Optimizacion del Arranque en el sutiraje mediante tecnicas de aire comprimido

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

High-pressure compressed air shots have been begun to use for coal stop caving in horizontal sublevel caving workings, as alternative to explosives, since they do not condition the winning cycles and they produce a smaller deterioration in the vein walls. In spite of those advantages, different parameters influence on shot result is not known. For this reason, a research project has been carried out in order to improve the high-pressure compressed air technique to extend the system implementation and to reduce the winning costs in the sublevel caving workings. The research works have consisted of a numerical model development and reduced scale and real scale tests. The model describes fragile material fragmentation under dynamical loadings and it has been implemented in a code. The tests allow to study the different parameter influence and to validate the numerical model. The main research results are, on the one hand, a numerical model that allows to define the best shot plan for user's working conditions and, on the other hand, the great influence of the air volume on the disruptive strength has been proven. (Author)

Energetic analysis of a wood fired grain drier; Analise energetica de secador de graos a lenha

Energy Technology Data Exchange (ETDEWEB)

Campos, Alessandro Torres [Universidade Estadual do Oeste do Parana (UNIOESTE), Marechal Candido Rondon, PR (Brazil). Grupo de Pesquisas em Ambiencia do Oeste do Parana], e-mail: atcampos3@yahoo.com.br; Melo, Evandro de Castro; Sousa e Silva, Juarez de [Universidade Federal de Vicosa (UFV), Vicosa, MG (Brazil). Dept. de Engenharia Agricola

2004-07-01

Aiming at the attendance of a small and medium size group of producers a four chambers fixed-bed dryer prototype with a mechanical revolving system was designed, constructed and energy performance tested. During drying for the prototype test, using coffee the revolving operation proceeded in two chambers which were connected to the dryer plenum at different positions and at a regular three-hours intervals; the other chambers remained static. The dryer operated at a drying-air temperature of 43 deg C and an air-flow of 21 m3 min-1 m-2. In the realized test the product moisture content was reduced from 43.1 to 12.7% w.b. over a 42-hours period. The specific energy consumption was 12.752 kJ per kilogram of evaporated water. The obtained results showed that chamber 1 which was submitted to the revolving operation presented the best work conditions due to your plenum connection position. (author)

First document of the eoloelectric project of the wind corridor of the Tehuantepec Isthmus; Primer documento del proyecto eoloelectrico del corredor eolico del Istmo de Tehuantepec

Energy Technology Data Exchange (ETDEWEB)

Borja Diaz, Marco A.; Jaramillo Salgado, Oscar A.; Mimiaga Sosa, Fernando [Instituto de Investigaciones Electricas, Cuernavaca, Mor. (Mexico)

2005-07-01

This document makes evident that now the political will exists to inspire the eoloelectric development in Mexico, and that a wide range of actors of the public and private sector, both national and international. These sectors are willing to support all the actions that lead to achieve that the eoloelectric generation will be one of the most productive industries of the country in the context of the power diversification for the sustainable development. Therefore, the main challenge is to formulate and to carry out a plan of actions to achieve strategic goals in the short, medium and long term, so that, gradually is possible to take advantage of all the benefits that the eoloelectric generation in its diverse niches of opportunity offers. In this book, the strategies of the main eoloelectric markets, the power policy, and the eoloelectric development in the Isthmus of Tehuantepec in the last 10 years are described. [Spanish] Este documento hace evidente que ahora existe la voluntad politica para impulsar el desarrollo eoloelectrico en Mexico y que una amplia gama de actores del sector publico y privado tanto nacional como internacional, estan dispuestos a apoyar todas las acciones que conduzcan a lograr que la generacion eoloelectrica sea una de las industrias mas productivas del pais en el contexto de la diversificacion energetica para el desarrollo sustentable. Por consiguiente, el reto principal es formular y llevar a cabo un plan de acciones para lograr metas estrategicas en el corto, mediano y largo plazo, de tal forma que, de manera gradual sea posible aprovechar todos los beneficios que ofrece la generacion eoloelectrica en sus diversos nichos de oportunidad. En este libro se describen las estrategias de los principales mercados eoloelectricos, la politica energetica, y el desarrollo eoloelectrico en el Istmo de Tehuantepec en los ultimos 10 anos.

Measurement of electrical energy and typification of end uses in the domestic sector; Medicion de energia electrica y tipificacion de usos finales en el sector domestico

Energy Technology Data Exchange (ETDEWEB)

Garcia Juarez, Francisco; Maqueda Zamora, Martin Roberto [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2003-07-01

In this work the advantages in using modern measuring equipment that allows the segregation of load curves of the domestic users using a single measuring equipment are presented, some samples of the measurements that have been obtained during measurements made to diverse domestic users are presented. Also, some other complementary technologies of recent development are mentioned that help in the application of power efficiency measures in the diverse sectors, the use of these equipment serves as a support for measuring the effectiveness of the programs of of energy saving and of the demand management that are desired to implement. The objective of this article is to demonstrate the use of the modern measuring equipment for the typification and measurement of the end uses in the domestic sector, and to present the advantages of using these equipment in the power efficiency studies. [Spanish] En este trabajo se exponen las ventajas de usar equipos de medicion modernos que permiten la desagregacion de curvas de carga de los usuarios domesticos utilizando un solo equipo de medicion, se presentan algunas muestras de las mediciones que se han obtenido durante mediciones realizadas a diversos usuarios domesticos. Tambien, se mencionan algunas otras tecnologias complementarias de reciente desarrollo que ayudan en la aplicacion de medidas de eficiencia energetica en los diversos sectores, el uso de estos equipos sirve de soporte para medir la efectividad de los programas de ahorro de energia y de administracion de la demanda que se desean implementar. El objetivo de este articulo es demostrar el uso de los equipos de medicion modernos para la tipificacion y medicion de usos finales en el sector domestico, y presentar las ventajas de usar estos equipos en los estudios de eficiencia energetica.

Influence of vegetation in the energetic balance outdoor urban spaces: Analysis and evaluation of its microclimatic effect; Influencia de la vegetacion en el balance energetico de los espacios exteriores urbanos: Analisis y evaluacion de sus efectos microclimaticos

Energy Technology Data Exchange (ETDEWEB)

Ochoa, J. Manuel [Universidad de Sonora, Hermosillo, Sonora (Mexico); Roset, Jaume [Universidad Politecnica de Cataluna, Barcelona (Spain)

2000-07-01

We present design guidelines to detect and to control the energy fluxes within and urban space. The main purpose is to create outdoor spaces with appropriate comfort conditions and to improve energy efficiency of adjacent buildings, by modifying its surrounding areas, approaching outdoor environment to the desired indoor conditions. The design guidelines as well as the concepts developed on this paper are explained in a language familiar to architects, urban planners and landscape designers, which have to take energetic and bioclimatic decisions up the first stage of a project process. A case study analysis of an urban scenery is presented, and conclusions about the advantage of using the vegetation as an instrument of microclimatic control are given. [Spanish] En este articulo se presentan pautas de diseno, que estan encaminadas, a saber detectar y en caso necesario reconducir, los flujos de energia dentro del espacio urbano. El proposito es crear espacios exteriores, con condiciones de confort ambiental, adecuadas a los usuarios de dicho espacio y por otro lado, mejorar la eficiencia energetica de los edificios, al modificar su entorno inmediato. Tanto las pautas de diseno, como los conceptos desarrollados en este trabajo, estan explicados con un discurso orientado al lenguaje de los profesionales dedicados al diseno urbano, arquitectonico y del paisaje, que son quienes deben hacer las consideraciones energeticas y bioclimaticas, desde las primeras etapas de un proyecto. Finalmente se presenta el ejemplo de un escenario urbano, donde se han realizado mediciones de los parametros climaticos, analizando cualitativa y cuantitativamente la influencia de la vegetacion y otros elementos del paisaje urbano sobre el microclima, y se dan conclusiones sobre la conveniencia de utilizar la vegetacion como un instrumento para el control microclimatico en los espacios exteriores urbanos.

Algoritmo genético permutacional para el despliegue y la planificación de sistemas de tiempo real distribuidos

Directory of Open Access Journals (Sweden)

Ekain Azketa

2013-07-01

ón, Algoritmos genéticos, Optimizaciones multiobjetivo, Keywords: Real-time systems, Scheduling algorithms, Genetic algorithms, Multiobjective optimisations.

Efficient use of electric power in corporative 3M Mexico; Uso eficiente de la energia electrica en el corporativo 3M Mexico

Energy Technology Data Exchange (ETDEWEB)

Sanchez Perez, Alfredo; Quinones Bonilla, Antonio S. [3M Mexico, S.A. de C.V. (Mexico); Bustos Antunez, Jorge I; Reyes Arce, Manuel [Hines Interests, S.A. de C.V. (Mexico)

2003-07-01

It is not enough to count on with the state of the art technology for the daily operation of a building, the challenge is to be able to make a clear analysis and with attainable goals for the optimization of rational use of the electrical energy in the operation of intelligent buildings without affecting the comfort and productivity for users as well as the functionality and profitability for the owner. This went our base to carry out control strategies that helped the efficient use of the electrical energy, obtaining important savings without neglecting the operative part, of services and human within the property. It is thus, that 3M Mexico wanting to reach these purposes, conducted actions to improve the efficiency of the equipment in the following items: electric network, general lighting, air conditioning system, ventilation and extraction, hydropneumatic system, and sumps operation. [Spanish] No basta contar con la tecnologia de punta para la operacion diaria de un edificio, el reto es ser capaces de realizar un analisis claro y con metas alcanzables para la optimizacion de uso racional de la energia electrica en las operaciones de edificios inteligentes sin afectar el confort y productividad para usuarios asi como la funcionalidad y rentabilidad para el propietario. Esta fue nuestra base para llevar a cabo estrategias de control que ayudaron al uso eficiente de la energia electrica, obteniendo ahorros importantes sin descuidar la parte operativa, de servicios y humana dentro de la propiedad. Es asi, que 3M Mexico queriendo alcanzar dichos propositos, realizo acciones para mejorar la eficiencia de los equipos en los siguientes rubros: red electrica, iluminacion general, sistema de aire acondicionado, ventilacion y extraccion, sistema hidroneumatico, y operacion de carcamos.

Dosimetric assessment from 212Pb inhalation at a thorium purification plant

International Nuclear Information System (INIS)

Campos, M. P.; Pecequilo, B. R. S.

2004-01-01

At the Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo (Brazil)), there is a facility (thorium purification plant) where materials with high thorium concentrations are manipulated. In order to estimate afterwards the lung cancer risk for the workers, the thoron daughter ( 212 Pb) levels were assessed and the committed effective and lung committed equivalent doses for workers in place. A total of 28 air filter samples were measured by total alpha counting through the modified Kusnetz method, to determine the 212 Pb concentration. The committed effective dose and lung committed equivalent dose due to 212 Pb inhalation were derived from compartmental analysis following the ICRP 66 lung compartmental model, and ICRP 67 lead metabolic model. (authors)

Experimental analysis of a nuclear reactor prestressed concrete pressure vessels model

International Nuclear Information System (INIS)

Vallin, C.

1980-01-01

A comprehensible analysis was made of the performance of each set of sensors used to measure the strain and displacement of a 1/20 scale Prestressed Concrete Pressure Vessel (PCPV) model tested at the Instituto de Pesquisas Energeticas e Nucleares (IPEN). Among the three Kinds of sensors used (strain gage, displacement transducers and load cells) the displacement transducers showed the best behavior. The displacemente transducers data was statistically analysed and a linear behavior of the model was observed during the first pressurizations tests. By means of a linear statistical correlation between experimental and expected theoretical data it was found that the model looses the linearity at a pressure between 110-125 atm. (Author) [pt

Citham a computer code for calculating fuel depletion-description, tests, modifications and evaluation

International Nuclear Information System (INIS)

Alvarenga, M.A.B.

1984-12-01

The CITHAN computer code was developed at IPEN (Instituto de Pesquisas Energeticas e Nucleares) to link the HAMMER computer code with a fuel depletion routine and to provide neutron cross sections to be read with the appropriate format of the CITATION code. The problem arised due to the efforts to addapt the new version denomined HAMMER-TECHION with the routine refered. The HAMMER-TECHION computer code was elaborated by Haifa Institute, Israel within a project with EPRI. This version is at CNEN to be used in multigroup constant generation for neutron diffusion calculation in the scope of the new methodology to be adopted by CNEN. The theoretical formulation of CITHAM computer code, tests and modificatins are described. (Author) [pt

Modeling the individual plants for the planning of the energetic operation of the national interconnected power system; Uma modelagem a usinas individualizadas para o planejamento da operacao energetica do sistema interligado nacional

Energy Technology Data Exchange (ETDEWEB)

Marques, T.C.; Cruz Junior, G.; Vinhal, C. [Universidade Federal de Goias (UFG), Goiania, GO (Brazil). Escola de Engenharia Eletrica e de Computacao], Emails: thyago@eeec.ufg.br, gcruz@eeec.ufg.br, vinhal@eeec.ufg.br

2009-07-01

This paper presents an operational policy for the mid term hydrothermal scheduling of the Brazilian Interconnected Power System (BIPS) based on the individual representation of the hydro and thermo power plants, the detailed representation of the plants' features and the indirect representation of the inflow stochasticity through a forecasting model. These characteristics differs the operational policy which is in use nowadays in BIPS, which is based on four interconnected subsystems represented by composite reservoirs. Several case studies are presented to evaluate the performance of the operational policy, from the simple case with a single hydro plant system to the complete case of the whole BIPS under real conditions. For this last case an operational adjustment procedure was implemented to assure the market attendance considering interchange constraints between the subsystems. (author)

Energy assessment of nitrogen variable rate fertilization on wheat; Analise energetica da aplicacao de nitrogenio em taxa variavel em trigo

Energy Technology Data Exchange (ETDEWEB)

Colaco, A.F.; Karam, E.H.; Romanelli, T.L.; Molin, J.P. [Escola Superior de Agricultura Luiz Queiroz (ESALQ/USP), Piracicaba, SP (Brazil). Dept. de Engenharia de Biossistemas], Email: andrecolaco@usp.br; Povh, F.P. [Fundacao ABC Pesquisa e Desenvolvimento Agropecuario, Castro, PR (Brazil)

2011-07-01

Precision Agriculture (PA) is a technique that can reduce the inputs utilization in agriculture production, including the nitrogen fertilizer consume. Great importance is given to this fertilizer, due to its contribution on energy input in agriculture. Methodologies based on the calculation of energy flow of agriculture systems are capable to identify management practices that use energy more efficiently. So, this study's objective is to evaluate the variable-rate nitrogen fertilization on wheat, using energy assessment. This study was carried on in two wheat fields, in which the fertilization was done adopting strips alternated by conventional method (single nitrogen dose) and by nitrogen variable-rate technology. Thus, the input and output energy in the system, energy balance, energy return on investment (EROI) and incorporated energy were determined for each geo-referenced point within the fields. Results showed that less energy was demanded when using variable-rate technology, due to the nitrogen saving, providing greater energy balance, EROI and lower incorporated energy on the areas managed using PA. The energy assessment showed to be an important tool to evaluate systems that use PA, because it is capable of monitoring crops energy potential. (author)

Construction components and energy efficiency in buildings; Componentes de construccion y eficiencia energetica en edificios

Energy Technology Data Exchange (ETDEWEB)

Bansal, N.K.; Bhandari, M.S.; Kummar, P.S. [Centro para el Estudio de Energia, Instituto Hindu de Tecnologia, Hauz Khas, Nueva Delhi (Indonesia)

2005-01-15

An energy efficiency analysis to a set of buildings was made in India to quantify the effects of the individual design concepts with respect to the energy system in general. The saving potential of energy of different concepts as well as the orientation, windows, air cavities, insulation, etc. was quantified for the different climatic conditions that prevail in most of the Central India regions. It is demonstrated that the specific requirement of heat energy can be reduced to 300 kWh/m{sup 2} a (U{sub edifice} = 2.13 W/m{sup 2} K) for a building of normal construction up to 143 kWh/m{sup 2} a (U{sub edifice} = 0.95 W/m{sup 2} K) when using ceiling insulation and walls and by means of the use of double glass windows. [Spanish] Se realizo el analisis de eficiencia de energia a un conjunto de edificios en la India, para cuantificar los efectos de los conceptos individuales de diseno respecto al sistema de energia en general. El potencial de ahorro de energia de distintos conceptos, como la orientacion, ventanas, cavidades de aire, aislamiento, etc. fue cuantificado para las distintas condiciones climaticas que prevalecen en la mayoria de las regiones de India central. Se demuestra que el requerimiento especifico de energia calorifica puede ser reducida de 300 kWh/m{sup 2} a (U{sub edificio} = 2.13 W/m{sup 2} K) para un edificio de construccion normal hasta 143 kWh/m{sup 2} a (U{sub edificio} = 0.95 W/m{sup 2} K) al usar un aislante en el techo, paredes y mediante el empleo de ventanas de doble vidrio.

Planning of the energetic operation based on storage guide-curves; Planejamento da operacao energetica baseado em curvas-guias de armazenamento

Energy Technology Data Exchange (ETDEWEB)

Zambelli, Monica de S.; Cicogna, Marcelo A.; Soares, Secundino [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Eletrica

2006-07-01

The proposal of this work is to present a long term hydrothermal scheduling operating policy based on the concept of storage guide-curves. According to this policy, at each stage of the planning period the decision of the amount of water to be discharged by each hydrothermal unit must be such that keep its reservoir at levels pre-determined by curves obtained by an optimization method. The performance analysis for this operating policy is given by simulation with historical inflow data, considering a single hydrothermal system, constituted by a single hydro plant, and a composite system, constituted by hydro plants in cascade, adopting as performance criteria the minimization of the expected operating cost. The results demonstrate that, although simple and clear, this operating policy presents a competitive performance in the long term hydrothermal scheduling. (author)

Energy analysis of physic nut (Jatropha curcas L.) culture in dry land system: case study; Analise energetica da cultura de pinhao-manso (Jatropha curcas L.) em sistema de sequeiro: estudo de caso

Energy Technology Data Exchange (ETDEWEB)

Frigo, Michelle Sato [Universidade Estadual Paulista Julio de Mesquisa Filho (UNESP), Botucatu, SP (Brazil). Faculdade de Ciencias Agrarias. Pos-Graduacao em Agronomia], e-mail: msfrigo@fca.unesp.br; Bueno, Osmar de Carvalho; Esperancini, Maura Seiko Tsutsui [Universidade Estadual Paulista Julio de Mesquisa Filho (UNESP), Botucatu, SP (Brazil). Faculdade de Ciencias Agrarias. Dept. de Gestao e Tecnologia Agroindustrial], e-mails: osmar@fca.unesp.br; maura@fca.unesp.br

2008-07-01

Due to the gradual reduction of the oil reserves, alternatives come being studied and one of these are bio fuel being one of the potential cultures for its production would be the physic nut (Jatropha curcas L.). However, studies concerning this culture are scarce in international and national level, as much in what it says respect to how much energy the agronomic questions. The present work aimed to evaluate the index of energy efficiency for unit of area of agroecosystem physic nut under dry land system, in determined system. It was used primary data from NNE Minas Agro-Florestal Ltda., located at Janauba/MG, harvest season 2004/2005, therefore these are the oldest areas in production of the country oldest. In the construction of the structure of energy great expenses of agroecosystem in question, the gotten average values had been considered, inside of the studied areas of dry land. The results of the energy efficiency had been presented by the structure of energy great expenses, for type, source and form and for the rude energy. A rude energy of the equal product was observed the 319,30 MJ. ha-1, with a participation of 12,09% and 87,91% of the energies direct and indirect, respectively. It was concluded that agro ecosystem studied depended basically on industrial power plant, under the form of insecticides (39,71%). The energy balance was of 319.30 MJ. ha -1, the same value of the systems, because the non usage of recycled sources, being that due the same the factor the index of energy efficiency, was not possible of being calculated; with regard to cultural efficiency this was of 0.25. (author)

Recommendations guide for the correct prescription's tests of diagnosis by image; Guia de recomendaciones para la correcta solicitud de pruebas de diagnostico por imagen

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

instalaciones, la calidad de esas practicas, su justificacion y su optimizacion son hoy un tema relevante para las sociedades cientificas y los organismos reguladores. A partir de la adopcion de la Directiva 97/43/EURATOM, y la realizacion de la Conferencia de Malaga la mayoria de los paises europeos han implementado planes de accion para la proteccion radiologica del paciente, incluyendo la busqueda de consenso en relacion con la optimizacion de dosis y los criterios de justificacion para la indicacion de los examenes. Un ejemplo de ello es la guia PR/118 para la solicitud de estudios de diagnostico. En este marco, se llevaron a cabo en nuestro pais dos Jornadas sobre Proteccion Radiologica del Paciente (PRP) donde se organizaron 'Grupos de Trabajo' en Radiodiagnostico, Radioterapia, Medicina Nuclear y Radioproteccion de la Mujer Gestante, y se iniciaron actividades sistematicas que recibieron un fuerte apoyo institucional de la Sociedad Argentina de Radiologia, y concluyeron con la elaboracion de un 'Programa de Proteccion Radiologica del Paciente' que esta siendo implementando.

Optimization of fuel cells for BWR based in Tabu modified search; Optimizacion de celdas de combustible para BWR basada en busqueda Tabu modificada

Energy Technology Data Exchange (ETDEWEB)

Martin del Campo M, C.; Francois L, J.L. [Facultad de Ingenieria, UNAM, Laboratorio de Analisis en Ingenieria de Reactores Nucleares, Paseo Cuauhnahuac 8532, 62550 Jiutepec, Morelos (Mexico); Palomera P, M.A. [Facultad de Ingenieria, UNAM, Posgrado en Ingenieria en Computacion, Circuito exterior s/n, Ciudad Universitaria, Mexico, D.F. (Mexico)]. e-mail: cmcm@fi-b.unam.mx

2004-07-01

The advances in the development of a computational system for the design and optimization of cells for assemble of fuel of Boiling Water Reactors (BWR) are presented. The method of optimization is based on the technique of Tabu Search (Tabu Search, TS) implemented in progressive stages designed to accelerate the search and to reduce the time used in the process of optimization. It was programed an algorithm to create the first solution. Also for to diversify the generation of random numbers, required by the technical TS, it was used the Makoto Matsumoto function obtaining excellent results. The objective function has been coded in such a way that can adapt to optimize different parameters like they can be the enrichment average or the peak factor of radial power. The neutronic evaluation of the cells is carried out in a fine way by means of the HELIOS simulator. In the work the main characteristics of the system are described and an application example is presented to the design of a cell of 10x10 bars of fuel with 10 different enrichment compositions and gadolinium content. (Author)

IPEN scientific and technical publications 1984-1986

International Nuclear Information System (INIS)

1988-01-01

The Instituto de Pesquisas Energeticas e Nucleares - IPEN (Energy Research Institute) from Sao Paulo, Brazil, was founded in 1956. Since its foundation, the main objectives of IPEN has been to undertake research and development into the peaceful uses of nuclear energy and to train scientific personnel to post-graduate level. The IPEN Scientific and Technical Publication - IPEN/STP, is a system developed at IPEN. Its purpose has been to generate a data base identifying the technical and scientific literature produced by IPEN staff members, published either in the Institute's series or in others brazilian and foreign publications. Documents cited in this 1984-1986 supplement include those in which IPEN staff members were authors or co-authors; document published by foreign research visitors while working at IPEN facilities; theses prepared by IPEN staff and reports in which IPEN is a corporate author. The IPEN technical publications reflect the main fields of research persuaded by the Institute, namely nuclear physics radiochemistry, chemical engineering, nuclear metallurgy and engineering and finally medical and industrial applications of radioisotopes. In this 1984-1986 supplement 458 document published by IPEN staff are cited, following the main subject heading of INIS Subject Categories. (author)

IPEN Scientific and technical publications 1982-1983

International Nuclear Information System (INIS)

1984-01-01

The Instituto de Pesquisas Energeticas e Nucleares - IPEN (Energy Research Institute) from Sao Paulo, Brazil, was founded in 1956. Since its foundation, the main objectives of IPEN has been to undertake research and development into the peaceful uses of nuclear energy and to train scientific personnel to post-graduate level. The IPEN Scientific and Technical Publication - IPEN/STP, is a system developed at IPEN. Its purpose has been to generate a data base identifying the technical and scientific literature produced by IPEN staff members, published either in the Institute's series or in others brazilian and foreign publications. Documents cited in this 1982-1983 supplement include those in which IPEN staff members were authors or co-authors; document published by foreign research visitors while working at IPEN facilities; theses prepared by IPEN staff and reports in which IPEN is a corporate author. The IPEN technical publications reflect the main fields of research persuaded by the Institute, namely nuclear physics radiochemistry, chemical engineering, nuclear metallurgy and engineering and finally medical and industrial applications of radioisotopes. In this 1982-1983 supplement 131 document published by IPEN staff are cited, following the main subject heading of INIS Subject Categories. (author)

Design and Fabrication Study on the TESLA500 Superconducting Magnet Package

Energy Technology Data Exchange (ETDEWEB)

Garcia-Tabares, L.; Toral, F.; Calero, J.; Abramian, P.; Iturbe, R.; Etxeandia, J.; Lucia, C.; Landete, R.; Gomez, J.

2001-07-01

An international collaboration at DESY is currently studying the possibilities of a new type of particle accelerator: the superconducting linear collider (1). Developed under the project name TESLA, which stands for TeV Energy Superconducting Linear Accelerator, the facility would be placed in a 33 km long tunnel and would work at the energy range of 0.5 to 0.8 TeV. TESLA opens up new horizons not only as a particle accelerator because it can be also used to generate laser-type X-ray beams: the accelerated electrons would be guided through a refined system of magnetic fields to form a Free Electron Laser (FEL). This study is about one of the components of the accelerator: the magnet package. A technical design of this device and a cost estimate of the series production have been performed. The present report should be understood as a Spanish contribution to the TESLA project. The study has been lead by CIEMAT (Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas) [2], and several Spanish companies have also been involved: ANTEC, JEMA and INGOVI. Special thanks are given to the Oficina de Ciencia y Tecnologia, which has granted this work. (Author) 16 refs.

Recovery of radiogenic lead-208 from a residue of thorium and rare earths obtained during the operation of a thorium nitrate purification pilot plant

International Nuclear Information System (INIS)

Seneda, Jose Antonio

2006-01-01

Brazil has a long tradition in thorium technology, from mineral dressing (monazite) to the nuclear grade thorium compounds. The estimate reserves are 1200,000. ton of ThO 2 . As a consequence from the work of thorium purification pilot plant at Instituto de Pesquisas Energeticas e Nucleares-CNEN/SP, about 25 ton of a sludge containing thorium and rare earths was accumulated. It comes as a raffinate and washing solutions from thorium solvent extraction. This sludge, a crude hydroxide named RETOTER contains thorium, rare earths and minor impurities including the radiogenic lead-208, with abundance 88.34 %. This work discusses the results of the studies and main parameters for its recovery by anionic ion exchange technique in the hydrochloric system. The isotope abundance of this lead was analyzed by high resolution mass spectrometer (ICPMS) and thermoionic mass spectrometer (TIMS) and the data was used to calculate the thermal neutron capture cross section. The value of s ? o = 14.6 +/- 0.7 mb was found, quite different from the s ? o = 174.2 +/- 7.0 mb measure cross section for the natural lead. Preliminary study for the thorium and rare earths separation and recovery was discussed as well. (author)

Application of radiation technology to biomass conversion processes

International Nuclear Information System (INIS)

Castagnet, A.C.G.

1984-01-01

The work carried out at the Instituto de Pesquisas Energeticas e Nucleares (IPEN) is reported for the following research projects: wood powdering of pre-irradiated chips; effect of combining electron beam processing (EBP) with other pretreatments on the saccharification of lignocellulosic materials; radiation immobilization of enzymes. The EBP of eucalyptus chips at an average dose of 1.5 x 10 5 Gy allowed a reduction of the energy required to produce a given weight of wood particles smaller than 300 μm by a factor of five. Wood powder of this particle size proved to be an excellent fuel for suspension firing system and could be used as raw material to feed continuous hydrolytic processes. Conversion efficiencies of 25.8% and 53.4%, respectively, were obtained in the production of reducing sugar by enzymatic hydrolysis of eucalyptus wood and sugarcane bagasse when materials were previously irradiated at 10 5 Gy, pulverized at 50 mesh and impregnated with 2% NaOH solution. Immobilization of cellulase by radiation induced polymerization of hydroxy-ethyl-methacrylate(HEMA) was effective when made at - 78 0 C in the presence of silica gel adsorbents or polyethylene glycol. (Author) [pt

Analysis of results from intercomparison among Spanish laboratories involved of photon energy ''137 Cs for environmental dosimetry laboratories

International Nuclear Information System (INIS)

Gonzalez, A.M.; Brosed, A.; Salas, R.

2003-01-01

Any environmental thermoluminescent dosemeter (TLD) system must be periodically calibrated at a calibration laboratory. In this frame, the Consejo de Seguridad Nuclear (CSN) has performed an intercomparison among Spanish laboratories involved in environmental monitoring, by means of TLD, in order to verify the traceability of the whole dosimeter and reader to the national standard for the protection quantities of interest for a given photon energy (''137Cs). To achieve this goal the CSN asked the Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas (CIEMAT) to carry out the reference irradiations in the energy above mentioned at the lonising Radiations Metrology Unit headquarters. Nine laboratories have participated. All the dosemeters were irradiated with the same air kerma rate. The radiological quantity used was the ambient dose equivalent, H (10), and the values of this quantity assigned to each laboratory were between 210 and 360 μSv. All the dosemeters of the participating laboratories met the two analysis criteria used. All of them demonstrated a satisfactory fulfilment of the requirements established by so called trumpet curves and of the requirements established by the ANSI 1311. (Author) 7 refs

Design and Fabrication Study on the TESLA500 Superconducting Magnet Package

International Nuclear Information System (INIS)

Garcia-Tabares, L.; Toral, F.; Calero, J.; Abramian, P.; Iturbe, R.; Etxeandia, J.; Lucia, C.; Landete, R.; Gomez, J.

2001-01-01

An international collaboration at DESY is currently studying the possibilities of a new type of particle accelerator: the superconducting linear collider (1). Developed under the project name TESLA, which stands for TeV Energy Superconducting Linear Accelerator, the facility would be placed in a 33 km long tunnel and would work at the energy range of 0.5 to 0.8 TeV. TESLA opens up new horizons not only as a particle accelerator because it can be also used to generate laser-type X-ray beams: the accelerated electrons would be guided through a refined system of magnetic fields to form a Free Electron Laser (FEL). This study is about one of the components of the accelerator: the magnet package. A technical design of this device and a cost estimate of the series production have been performed. The present report should be understood as a Spanish contribution to the TESLA project. The study has been lead by CIEMAT (Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas) [2], and several Spanish companies have also been involved: ANTEC, JEMA and INGOVI. Special thanks are given to the Oficina de Ciencia y Tecnologia, which has granted this work. (Author) 16 refs

Technological advances in zero energy buildings; Avances tecnologicos en edificios de energia cero

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Milla, Guillermo; Perez Rebolledo, Hugo; Acoltzi Acoltzi, Higinio [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2011-07-01

Buildings use a large amount of energy to operate and are one of the main sources of contaminating emissions. A building is a complex system and all of their components contribute to the total energy demand. The technology to construct zero-energy buildings is already available, but obstacles exist such as the lack of information and technical training of architects and engineers to design highly energy efficient buildings. The present article describes the progress to-date and the future prospects for the design and construction of zero-energy buildings, as well as the problems involved in its implementation. [Spanish] Los edificios usan una gran cantidad de energia para operar y son una de las principales fuentes de emisiones contaminantes. Un edificio es un sistema complejo y todos sus componentes contribuyen a la demanda total de energia. La tecnologia para construir edificios de energia cero ya esta disponible, pero existen barreras como falta de informacion o capacitacion tecnica a arquitectos e ingenieros, para disenar edificios de alta eficiencia energetica. El presente articulo muestra los avances a la fecha y la prospectiva para el diseno y construccion de edificios de energia cero, asi como la problematica para su implementacion.

Household appliance data collection and market survey in central and eastern european countries; Raccolta dati e analisi del mercato sugli apparecchi elettrodomestici nei paesi dell'Europa centrale e orientale

Energy Technology Data Exchange (ETDEWEB)

Presutto, M. [ENEA, Funzione Centrali Studi, Centro Ricerche Ispra, Vercelli (Italy); Ricci, A. [Istituto di Studi per l' Integrazione dei Sistemi, Rome (Italy); Meli, L. [ANIE, Federazione delle Imprese Elettrotecniche ed Elettroniche, International Affaires Direction, Milan (Italy)

2001-07-01

legate all'efficienza energetica e alla compatibilita' ambientale di questi prodotti e dall'altro per identificare possibili scenari di miglioramento. Viene qui descritto il lavoro svolto, con particolare attenzione alla raccolta dati e all'analisi del mercato e i principali risultati ottenuti. L'esperienza acquisita dall'ENEA e piu' in generale dal Gruppo di Lavoro Italiano potrebbe essere messa a frutto nei paesi dell'America Latina, dove progetti simili potrebbero supportare la definizione di misure per il miglioramento dell'efficienza energetica degli usi finali elettrici. La disponibilita' di dati attendibili e' infatti essenziale al superamento delle barriere all'introduzione di qualsiasi politica energetica. L'efficace implementazione e l'armonizzazione regionale di politiche e misure sono estremamente importanti nell'America del Sud, anche se difficili da perseguire e la cooperazione internazionale e' fondamentale. L'approccio sviluppato con i progetti SACHA puo' facilitare il raggiungimento di questi obiettivi rendendo disponibile una consolidata metodologia analitica ed uno schema di provata efficacia per la raccolta sistematica e l'analisi di dati ed informazioni.

Photovoltaic power supplies: Energy option feasibility. Solare fotovoltaico come opzione energetica

Energy Technology Data Exchange (ETDEWEB)

Coiante, D.; Barra, L. (ENEA, Casaccia (Italy). Area Energetica)

1993-01-01

Commercialization prospects for grid connected, stand-alone and hydrogen- production photovoltaic power plants are assessed. The paper traces the evolution of the development of photovoltaic modules and correlates trends in R D expenditure and progress made with subsequent drops in the cost of photovoltaic power equipment. Assessments are made of limits in the marketability of grid connected photovoltaic power supplies and comments are made as to the wisdom of the current directions being taken by research groups operating in this field.

Energy analysis in a swine production system with use of manure as bio fertilizer in pasture; Analise energetica em sistema de producao de suinos com aproveitamento dos dejetos como biofertilizante em pastagem

Energy Technology Data Exchange (ETDEWEB)

Souza, Cassio V. [Universidade Federal dos Vales do Jequitinhonha e Mucuri (UFVJM), Diamantina, MG (Brazil)], email: agro.cassio@hotmail.com; Campos, Alessandro T. [Universidade Federal de Lavras (DEG/UFLA), MG (Brazil). Dept. de Engenharia], email: campos@deg.ufla.br; Bueno, Osmar C [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas; Silva, Enilson B [Universidade Federal dos Vales do Jequitinhonha e Mucuri (UFVJM), Diamantina, MG (Brazil). Dept. de Agronomia

2009-07-01

This work objective was to esteem the amount of energy employed in a complete cycle swine production and the energy balance of the system with utilization of the generated manure as bio fertilizer in pasture area, by using five cycles' average data, in a commercial farm in Diamantina municipal district - MG Brazil. The energy coefficient of each involved component was quantified in the productive process of finished swine, residues treatment and Brachiaria decumbens pasture production, in the form of ration, human labor, electric power, machines and equipment, fuel and lubricants, buildings, finished swine production and Brachiaria decumbens production. The average quantity of energy to produce 1 kg of alive swine was of 53.35 MJ. Of total employed energy in the system 76.03% (1,067,106.07 MJ) refers to the inputs and 23.97% (331,400 MJ) refers to the outputs, resulting in an energy efficiency coefficient of 0.31. The energy converted in swine for abate corresponded to 55.58% (184,200 MJ) of the outputs, while the pasture of Brachiaria decumbens reached a value of 44.42% (147,200 MJ). (author)

Study of stress in nuclear area workers: silent enemy

International Nuclear Information System (INIS)

Martins, Maria da Penha Sanches; Vanni, Silvia Regina; Andrade, Delvonei Alves de; Sabundjian, Gaiane

2011-01-01

The nuclear accidents occurred in Three Mile Island, Chernobyl and Fukushima were influenced by human factors. The objective of this paper is to study about the factors that influence the level of stress of the nuclear area workers. The paper is based on theoretical assumptions on occupational stress and its manifestations. The methodology used is based on questionnaires and interviews, obtained from Martins' work published in 2008 about the study of human factors focused on research reactor operators IEA-R1, of the Instituto de Pesquisas Energeticas e Nucleares (IPEN). In that study were analyzed the accidents occurred by human failure. The results presented in this paper showed some improvements in the reactors operators' work, and health. Operational reliability and facilities safety also improved. (author)

Annual report of the Brazilian Directory of R and D - 1995

International Nuclear Information System (INIS)

1996-03-01

The Directory of Research and Development of the Brazilian CNEN (National Nuclear Energy Commission) presents the report for 1995. The publication describes and cover activities carried out in the following areas: nuclear reactors, nuclear fuel cycle, control and instrumentation, application of nuclear techniques, radioisotope production, materials of nuclear interest, radioactive wastes and irradiated materials. Three institutes accomplish Directory's Programme: Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/MG); Instituto de Engenharia Nuclear (IEN/RJ); and Instituto de Pesquisas Energeticas e Nucleares (IPEN/SP). It is important to mention that the Institutes carry out a numberless of activities in cooperation with others institutions such as: universities, industries, private and government organizations. This cooperation is administrated through research contracts and agreements. 28 figs., 11 tabs

Renewable energies. A challenge and an opportunity for Central America; Energias renovables. Un reto y una oportunidad para America Central

Energy Technology Data Exchange (ETDEWEB)

Guevara, Leo; Castro S, Rene [Instituto Centroamericano de Administracion de Empresas (INCAE) (Costa Rica)

2007-07-15

There are analyzed in this working paper the following aspects: the Central America countries and their relations with the regional energy potencies -Mexico and Venezuela- and the impact they have in the energy supply. There are also explore the following aspects: the San Jose Agreement linked to the fossil fuels supply, the emerging scope boosted by Brazil and Colombia regarding to the alternative fuels. [Spanish] Este trabajo analiza los paises centroamericanos y sus relaciones con las potencias energeticas regionales como Mexico y Venezuela, y como estas impactan el suministro de energia en la region. Tambien se exploran mecanismos como el Pacto de San Jose, ligado al suministro de combustibles fosiles y las oportunidades emergentes impulsadas por Brasil y Colombia con combustibles alternativos.

Study of stress in nuclear area workers: silent enemy

Energy Technology Data Exchange (ETDEWEB)

Martins, Maria da Penha Sanches; Vanni, Silvia Regina [Centro Tecnologico da Marinha (CTMSP-SP), SP (Brazil); Andrade, Delvonei Alves de; Sabundjian, Gaiane, E-mail: delvonei@ipen.b, E-mail: gdjian@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2011-07-01

The nuclear accidents occurred in Three Mile Island, Chernobyl and Fukushima were influenced by human factors. The objective of this paper is to study about the factors that influence the level of stress of the nuclear area workers. The paper is based on theoretical assumptions on occupational stress and its manifestations. The methodology used is based on questionnaires and interviews, obtained from Martins' work published in 2008 about the study of human factors focused on research reactor operators IEA-R1, of the Instituto de Pesquisas Energeticas e Nucleares (IPEN). In that study were analyzed the accidents occurred by human failure. The results presented in this paper showed some improvements in the reactors operators' work, and health. Operational reliability and facilities safety also improved. (author)

Annual report of the Brazilian Directory of R and D - 1995; Relatorio anual da Diretoria de P e D 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The Directory of Research and Development of the Brazilian CNEN (National Nuclear Energy Commission) presents the report for 1995. The publication describes and cover activities carried out in the following areas: nuclear reactors, nuclear fuel cycle, control and instrumentation, application of nuclear techniques, radioisotope production, materials of nuclear interest, radioactive wastes and irradiated materials. Three institutes accomplish Directory`s Programme: Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/MG); Instituto de Engenharia Nuclear (IEN/RJ); and Instituto de Pesquisas Energeticas e Nucleares (IPEN/SP). It is important to mention that the Institutes carry out a numberless of activities in cooperation with others institutions such as: universities, industries, private and government organizations. This cooperation is administrated through research contracts and agreements. 28 figs., 11 tabs.

Analytical resolution of the mixture TBP-HDBP-H2MBP-H3PO4

International Nuclear Information System (INIS)

Pires, M.A.F.

1983-01-01

Several schemes for the separation of dibutylphosphoric acid (HDBP), main degradation product of tributylphosphate (TBP), in TBP/diluent, TBP/diluent-uranyl nitrate and TBP/diluent-thorium nitrate mixture were studied. For the resolution of HDBP-TBP/diluent-heavy metal nitrates (U-VI,Th-IV) systems, techniques such as: in exchange chromatography, ion chromatography using common ion exchangers and chromatographic separation with alumina column were investigated. For the identification, determination and analytical resolution following up the several systems studied, techniques such as refraction index measurement, electrical conductivity measurement, molecular absorption spectrophotometry, gas chromatography and ion chromatography, were applied. The separation of HDBP component was achieved using an alumina column where it was adsorbed from the TBP/diluent-uranyl nitrate and selectively eluted. Several modifications of this procedure for samples from the Uranium Purification Pilot Plant at Instituto de Pesquisas Energeticas e Nucleares (Sao Paulo, Brazil) were made. Special emphasis was given to the determination of HDBP using the ion chromatography technique. HDBP along with any monobutylphosphate acid (H 2 MBP) and phosphoric acid (H 3 PO 4 ) were stripped from the organic phase into dilute sodium hydroxide. HDBP is separated from H 2 MBP and H 3 PO 4 by ion chromatography and determined by its peak height. The determination of degradation products from TBP in TBP/diluent-uranyl nitrate and TBP/diluent-thorium nitrate systems was then performed. The detection limit for dibutylphosphate is 1.0μg HDBP/ml of analyte solution. (Author) [pt

Energy demand in the system sowing in different (Glycine max (L) Merril) systems planting and covering; Demanda energetica na semeadura de soja (Glycine max (L) Merril) em diferentes sistemas de manejo e cobertura do solo

Energy Technology Data Exchange (ETDEWEB)

Yano, Elcio Hiroyoshi [Universidade Estadual Paulista (UNESP), Ilha Solteira, SP (Brazil)], E-mail: elcio@agr.feis.unesp.br; Benez, Sergio Hugo; Silva, Paulo Roberto Arbex; Seki, Andre Satoshi [Universidade Estadual Paulista (UNESP), Botucatu, SP (Brazil); Mahl, Denise [Universidade Estadual de Maringa (UEM), Cidade Gaucha, PR (Brazil)

2010-07-01

The difficulty of producing quality forage associated to the high tax of decomposition of the covering killed of the soil and the low operational efficiency of agricultural machines did with that the present work was accomplished in the Experimental Farm Lageado, FCA/ UNESP of the Campus of Botucatu, on an Alsisol, with objective to analyze the energy demand requested in the soy sowing in different systems of handling of the soil (no-tillage, conventional tillage and reduced tillage), on cultural remains of black oats picked for hay, sorghum picked for humid silage of grains and spontaneous vegetation. The used experimental design was a split plot to the factorial type 3x3 with four repetitions and portions of 140 m{sup 2}, Meantime to the results, was ended that the coverings of the soil didn't influence in the values of traction force, potency, displacement speed and increase of the consumption of fuel happened and non accommodation of the turned of the tractor-seeder-fertilizer. Associate to the structural conditions of the soil as absence of traffic of machines and low index of rain fall. (author)

Energy efficiency in speed control system for induction motors; Eficiencia energetica em sistema de controle de velocidade em motores de inducao

Energy Technology Data Exchange (ETDEWEB)

Silva, Arlete Vieira da; Ribeiro, Elisangela do Nascimento; Tenorio, Iana Cavalcanti; Horta, Mario Marcos Brito [Centro Universitario de Belo Horizonte (UnBH), MG (Brazil)], e-mails: arlete.silva@prof.unibh.br, nr.elisangela@gmail.com, ianactenorio@gmail.com, mario_bhorta@yahoo.com.br

2011-07-01

This work has as objective the study of energy efficiency of induction motors fed by frequency inverters, since this is a practical resource that has progressively allowed the replacement of mechanical speed reducers. In this work the speed control of induction motors of the squirrel cage has steeped through the frequency inverters using scalar control. Induction motors are frequently used in industrial applications due to its simple construction, its low maintenance and reduced in size. It was possible through tests made at UNI-BH Electrical Engineering laboratory to obtain satisfactory results regarding the performance of the inverter CFW08 (WEG), speed control of induction motor. (author)

Proposal of a synchro panel meter instrument to replace the obsolete Synchro/Resolver reading device used as position indicator of safety rods assembly of the Brazilian IEA-R1 Nuclear Research Reactor

International Nuclear Information System (INIS)

Toledo, Fabio de; Brancaccio, Franco; Cardenas, Jose Patricio N.

2015-01-01

IPEN (Instituto de Pesquisas Energeticas e Nucleares) was founded in 1956 (as Atomic Energy Institute - IEA) as a facility complex, for the research, development and application, in the nuclear technology field. The institute is recognized as a national leader in nuclear research and development (R and D), including the areas of reactor operation, radiopharmaceuticals, industrial and laboratory applications, materials science and laser technologies and applications. IPEN's main facility is the IEA-R1, nuclear research reactor (NRR), today, the only one in Brazil with a power level suitable for applications in physics, chemistry, biology and engineering. Some radioisotopes are also produced in IEA-R1, for medical and other applications. A common problem faced in the IEA-R1 maintenance is instrumentation obsolescence; spare parts are no more available, because of discontinued production, and an updating program is mandatory, aiming at modernization of old-aged I and C systems. In the presented context, an electronic system is here proposed, as a replacement for the reactor safety (shim) rods assembly position indicator, based on an open-source physical computing platform called Arduino, which includes a simple microcontroller board and a software-code development environment. A mathematical algorithm for the synchro-motor signal processing was developed, and the obtained resolution was better than 1.5%. (author)

Study and determination of the influence factors of the radiopharmaceutical vials dimensions used for actimeter calibration at IPEN

International Nuclear Information System (INIS)

Martins, Elaine Wirney

2010-01-01

The efficiency and safety of the nuclear medicine practice depend, among others factors, of a quality control programme, mainly related to the use of the nuclide activity meters (activimeter). One of the most important sources of errors in the activimeter measurements is the thickness, size and volume of the vial that contains the radiopharmaceutical considering that a typical activimeter has its response dependent of the vial used. The objective of this work was to establish a quality control programme and the correction factors for the geometry of the vials used for distribution of radiopharmaceutical and activimeters calibration, considering that the Calibration Laboratory of Instruments (LCI) of the Instituto de Pesquisas Energeticas e Nucleares (IPEN) has a NPL-CRC Secondary Standard Radionuclide Calibrator System, manufactured for the Southern Scientific plc, compound by an ionization chamber well type and a current measurement system, with traceability to National Physical Laboratory (NPL) and calibrated with a P6 vial type with different dimensions of the one used for the IPEN. The radiopharmaceutical produced by IPEN 67 Ga, '1 31 I, 201 Tl and 99 mTc, had been tested using the two different vials. The results shown a maximum variation of 22% for 201 Tl, and the minimum variation was 2.98% for 131 I. The correction factors must be incorporated in the routine calibration of the activimeters. (author)

Proposal of a synchro panel meter instrument to replace the obsolete Synchro/Resolver reading device used as position indicator of safety rods assembly of the Brazilian IEA-R1 Nuclear Research Reactor

Energy Technology Data Exchange (ETDEWEB)

Toledo, Fabio de; Brancaccio, Franco; Cardenas, Jose Patricio N., E-mail: fatoledo@ipen.br, E-mail: fbrancac@ipen.br, E-mail: ahiru@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2015-07-01

IPEN (Instituto de Pesquisas Energeticas e Nucleares) was founded in 1956 (as Atomic Energy Institute - IEA) as a facility complex, for the research, development and application, in the nuclear technology field. The institute is recognized as a national leader in nuclear research and development (R and D), including the areas of reactor operation, radiopharmaceuticals, industrial and laboratory applications, materials science and laser technologies and applications. IPEN's main facility is the IEA-R1, nuclear research reactor (NRR), today, the only one in Brazil with a power level suitable for applications in physics, chemistry, biology and engineering. Some radioisotopes are also produced in IEA-R1, for medical and other applications. A common problem faced in the IEA-R1 maintenance is instrumentation obsolescence; spare parts are no more available, because of discontinued production, and an updating program is mandatory, aiming at modernization of old-aged I and C systems. In the presented context, an electronic system is here proposed, as a replacement for the reactor safety (shim) rods assembly position indicator, based on an open-source physical computing platform called Arduino, which includes a simple microcontroller board and a software-code development environment. A mathematical algorithm for the synchro-motor signal processing was developed, and the obtained resolution was better than 1.5%. (author)

Evaluation of the energetic equivalence of goat manure biogas; Avaliacao da equivalencia energetica do biogas de esterco de caprinos

Energy Technology Data Exchange (ETDEWEB)

Canafistula, Francisco Jose Firmino; Carvalho, Paulo Cesar Marques de [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Dept. de Engenharia Eletrica], e-mails: firmino@ufc.br, carvalho@dee.ufc.br

2008-07-01

The present paper shows the results of a research about a new production system model based on goats; part of the animals manure is used for biogas production. The biogas is used as fuel for water pumping for the irrigation of the animals pasture. For the viability of the project, a photovoltaic powered electrified fence was used. Additional to the positive results of sustainability, innovative solutions were developed for sizing, optimization and costs reduction by the use of digesters in small rural communities of the semi-arid of the Brazilian Northeast Region. (author)

Alternatives for the optimization of the biological treatment of tannery wastewaters; Alternativas para la optimizacion del tratamiento biologico de aguas residuales de curtidurias

Energy Technology Data Exchange (ETDEWEB)

Artiga Acuna, P.; Garrido Fernandez, J. M.; Mendez Pampin, R. M.

2003-07-01

The aim of the research was the optimization of the operational conditions of a wastewater treatment plant of a tannery in which both organic and nitrogen matter are removed. The strategy of operation which was evaluated was based in the succession of anoxic and aerobic periods with time in order to achieve denitrification. Two lab-scale activated sludge reactors of 2L were used, feeding the systems with the influent to the industrial scale reactor, by applying nitrogen and organic loading rates comprehended between 0,04 and 0.2 kg N-NH{sub 4}+/m''3.d and 0.1 and 0.7 kg COD/m''3.d respectively. The use of the industrial wastewater limited denitrification to only 10%. Thus, different external carbon sources were tested in order to increase the efficiency of the system by feeding them during the anoxic periods. The addition of Methanol or beam house wastewater stream with and without sulfide were assayed by using a COD{sub A}/N{sub t} ratio comprehended between 1 and 7.75% nitrogen efficiency was attained either with methanol or the beamhouse stream wastewater without sulfide at a COD{sub A}/N{sub t} ratio of 5 g/g. The concentration of nitrogen ions in the effluent 5-20 mg NO{sub 3}-N/L and 10 mg NH{sub 4}+-N/L, fulfilled legal requirements. (Author) 20 refs.

Solar cooking and wood in Chile, energetical alternatives; Cocina solares y manejo de lena en Chile, alternativas energeticas.

Energy Technology Data Exchange (ETDEWEB)

Serrano, R. P.

2004-07-01

Firewood in Latin America is, after petroleum, the second primary source of energy. In Chile, the statistics have shown that the total use of energy produce by firewood fluctuates between 16 and 21% from which the residential sector represents 54%. There are great social and environmental impacts produced by the use of firewood. For the near future, it will be difficult to eradicate the firewood consumption in Latin America. In looking for sustainable use of firewood to produce energy, NGOs have developed efficient systems for production, management and consume of it. For this research we will focus on the efficient use of biomass and solar energy use for cooking, both to be applied in suitable places. The paper shows Chilean experiences on both, biomass and solar energy production, and how these programs have impacted the national statistics in energy consumption. (Author)

Demand and energy efficiency in the soybean crop in no tillage; Demanda e eficiencia energetica no cultivo da soja em plantio direto

Energy Technology Data Exchange (ETDEWEB)

Riquetti, Neilor Bugoni; Seki, Andre Satoshi [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Programa Energia na Agricultura], E-mail: neilor@fca.unesp.br; Sousa, Saulo Fernando Gomes de [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Fazenda de Ensino Pesquisa e Producao; Silva, Paulo Roberto Arbex; Benez, Sergio Hugo [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas

2010-07-01

The increase in energy use in agriculture, combined with rising costs and possible stores for the future have led to the need for farming systems more efficient in the use of non-renewable resource. Based on this work was undertaken to determine the efficiency of cultivation of soybean in no-till system. For the calculations were quantified all operations that involve expenditure of energy from the drying up of the harvest, including depreciation of machinery energy, calculated in accordance with its life, weight, and the days of actual use. Energy efficiency was calculated by dividing the total energy produced by the grain and dry matter divided by the total input energy. The highest spending power in this culture system were due to the use of pesticides and fertilizers. The demand for energy was 7956.54 MJ.ha{sup 1} from the harvest desiccation. Energy efficiency was calculated at 5.95, ie for each unit of energy used was taken from 5.95 units in the form of grain. When calculated the energy of matter left by the crop after harvest coupled with the energy of the grains, the efficiency was 7.94. (author)

Energy saving, social and government communication; Ahorrro de energia, sociedad y comunicacion gubernamental

Energy Technology Data Exchange (ETDEWEB)

Morales Camarena, Francisco [Comision Nacional para el Ahorro de Energia, Mexico, D.F. (Mexico)

2001-07-01

The actions for the energy efficiency and the utilization of renewable energies are multiple and dispersed, in each one of the energy consumption points of the country. For this reason, two important factors to foment these actions are to promote the social participation and the effective government communication towards the society: energy saving and social participation. One of the main faculties of the National Commission of Energy Saving (CONAE) is to foment the efficiency in the energy use, through actions coordinated with the different agencies and organizations of the Federal Public Administration, with the governments of the federal entities and the municipalities and, through coordinated operations, with the private and social sectors. The CONAE has established mechanisms of coordination and cooperation with the private and social sectors, having fomented programs, projects and actions whose purpose is the energy efficiency, outstanding: 1) Committees and work groups; 2) Cooperation Agreements; 3) the Advisory Council for the Foment of Renewable Energy. [Spanish] Las acciones para la eficiencia energetica y el aprovechamiento de las energias renovables son multiples y dispersas, en cada uno de los puntos de consumo de energia del pais. Por ello, dos factores importantes para fomentar estas acciones son promover la participacion social y la comunicacion gubernamental eficaz hacia la sociedad: Ahorro de energia y participacion social. Una de las principales facultades de la Comision Nacional de Ahorro de Energia es fomentar la eficiencia en el uso de energia, a traves de acciones coordinadas con las diversas dependencias y entidades de la Administracion Publica Federal, con los gobiernos de las entidades federativas y de los municipios y, a traves de acciones concertadas, con los sectores social y privado. La CONAE ha establecido mecanismos de coordinacion y de cooperacion con los sectores privado y social, fomentando programas, proyectos y acciones cuyo

Optimization of control bars patterns and fuel recharges of coupled form; Optimizacion de patrones de barras de control y recargas de combustible de forma acoplada

Energy Technology Data Exchange (ETDEWEB)

Mejia S, D.M.; Ortiz S, J.J. [ININ, 52750 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: dulcema6715@hotmail.com

2006-07-01

In this work a system coupled for the optimization of fuel recharges and control bars patterns in boiling water reactors (BWR by its initials in English) is presented. It was used a multi state recurrent neural net like optimization technique. This type of neural net has been used in the solution of diverse problems, in particular the design of patterns of control bars and the design of the fuel recharge. However, these problems have been resolved in an independent way with different optimization techniques. The system was developed in FORTRAN 77 language, it calls OCORN (Optimization of Cycles of Operation using Neural Nets) and it solves both problems of combinatory optimization in a coupled way. OCORN begins creating a seed recharge by means of an optimization through the Haling principle. Later on a pattern of control bars for this recharge seed is proposed. Then a new fuel recharge is designed using the control bars patterns previously found. By this way an iterative process begins among the optimization of control bars patterns and the fuel recharge until a stop criteria it is completed. The stop criteria is completed when the fuel recharges and the control bars patterns don't vary in several successive iterations. The final result is an optimal fuel recharge and its respective control bars pattern. In this work the obtained results by this system for a cycle of balance of 18 months divided in 12 steps of burnt are presented. The obtained results are very encouraging, since the fuel recharge and the control bars pattern, its fulfill with the restrictions imposed in each one of the problems. (Author)

Nuclear and Energy Research Institute (1956-2000). A case study under the science, technology and brazilian culture history; Instituto de Pesquisas Energeticas e Nucleares (1956-2000). Um estudo de caso a luz da historia da ciencia, da tecnologia e da cultura brasileira

Energy Technology Data Exchange (ETDEWEB)

Gordon, Ana Maria Pinho Leite

2003-07-01

We analysed a period of the contemporary Brazilian history with the aim to discuss the inter-relationship between science, technology (S and T) and culture in a developing country, showing as a background for a case of study the history of the 'Instituto de Pesquisas Energeticas e Nucleares'. The history of Science and Technology, as a result of the human brain ability of innovate using the resources offered by nature, it is not only the description of successive findings carried out by talented men. It is a reflex of determined age of history as a consequence of accumulated knowledge connected also to human and cultural relationships, which together leads to the scientific and technological progress. In fact, the human brain and society march along together and can not be separated in this journey. In our study we recovered the initial steps of IPEN's outbreak; inserted its achievements in the context of the national policy for nuclear technology and evaluated how this policy was a reply of the governmental organizations to the worldwide situation. Finally, we spread the scientific ideas and technological findings of this institution, who has translate much of the life style and culture of our society. For this purposes, we analysed internal technical report series elaborated by several researchers and few testimonies. The Institution developed the fuel cycle technology, supplied radioisotopes for medical diagnosis and treatment purposes, generating economic resources for our country. The nuclear techniques are a relevant tool for researchers of this Institution applied for several purposes, including the assessment of the radioactivity levels in the environment, radioprotection, etc. Besides those applications, other techniques including the laser technology, the fuel cell, corrosion studies, etc, were implemented as a result of the improved capabilities and skills acquired during the almost 50 years of the Institute's existence. We make

A new multidimensional model for quality evaluation of graduate-level education in nuclear technology

International Nuclear Information System (INIS)

Mioranza, Claudio; Aquino, Afonso Rodrigues de

2009-01-01

Educational institutions have been highly concerned about the quality of products offered to the society, in order to obtain better results they need to provide a high degree quality service. The exclusive approach of this study is the development of a Multidimensional Model for the Educational Quality Assessment, named MULTQUALED, based on quality standards and models used in other economic sectors. This model was developed to support the decision process, concerning the strategic actions for improving the quality of the graduate courses. Four data collection instruments were created, comprehending dimensions such as pedagogical, human resources and facilities regarding qualified and quantified actions for the continuous improvement of educational quality management process. The study was applied to the Nuclear Technology stricto sensu Graduate Program from the Instituto de Pesquisas Energeticas e Nucleares, IPEN-CNEN/SP. (author)

Conceptos Basicos Sobre el Propano

Energy Technology Data Exchange (ETDEWEB)

2016-08-01

El propano provee energia a mas de 143.000 vehiculos en los Estados Unidos y 23 millones en todo el mundo. Flotas de todos los Estados Unidos han implementado con exito el uso de vehiculos que funcionan con gas propano, y en la actualidad varios funcionan gracias a este gas, incluyendo autobuses escolares, lanzaderas y autobuses publicos, asi como tambien furgonetas, taxis, vehiculos utilizados por las fuerzas del orden, barredoras de calles y camiones para uso profesional. El propano tambien se utiliza con frecuencia en aplicaciones fuera de la carretera, tales como montacargas, podadoras y equipos de uso profesional y otros equipos agricolas. Las ventajas del propano incluyen la disponibilidad interna, su rendimiento y el hecho de que genera menos emisiones de gases contaminantes que otras alternativas energeticas.

Photofission Cross Sections for 237Np in the Energy Interval from 5.27 to 10.83 MeV

International Nuclear Information System (INIS)

Geraldo, L.P.; Semmler, R.; Goncalez, O. L.; Mesa, J.; Arruda-Neto, J.D.T.; Garcia, F.; Rodriguez, O.

2000-01-01

Photofission cross sections for 237 Np have been measured as a function of energy, in the interval from 5.27 to 10.83 MeV. The gamma-ray spectra were those produced by thermal neutron capture, in 30 different target materials, at a tangential beam hole of the Instituto de Pesquisas Energeticas e Nucleares IEA-R1 2-MW research reactor. The set of experimental data has been unfolded employing least-squares methods and the covariance matrix methodology. The determined photofission cross sections for 237 Np, together with the complete correlation matrix for the involved errors, are presented and are compared with previous measurements reported in the literature. A statistical calculation for the 237 Np photofission cross sections was performed, and the results are compared with the experimental data

Analysis of the distribution of radiopharmaceuticals for nuclear medicine in Brazil

International Nuclear Information System (INIS)

Kuahara, Lilian T.; Correa, Eduardo L.; Potiens, Maria P.A.

2013-01-01

The objective of this study was to analyze the distribution of radiopharmaceuticals produced by Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN), as part of a project to develop a methodology for control and calibration of activimeters used by these Nuclear Medicine Services. This survey was conducted using registry data of registered customers and, with bases in such information, we analyzed the number of clinics all over the country. Considering the distribution of radiopharmaceuticals and what the most used in 2011, there was a total of 365 clinics, and this distribution as follows: Southeast with 56%, South 18%, Northeast 15%, North 4%, and Midwest with 7%. Among the various radioisotopes provided 26 were sold and most in demand are the 67 Ga, 131 I and IPEN-tec (technetium generator)

Criteria and evaluation of shallow land burial sites

International Nuclear Information System (INIS)

Chandra, U.

1986-01-01

The criteria for shallow ground disposal of radioactive wastes as developed by Nuclear Regulatory Commission-US and International Atomic Energy Agency are discussed. Emphasis has been given to: elaboration of various basic components of a national Strategy for radioactive waste disposal; development of technical requirements; environmental standards, consensus among scientific community and public confidence. Aspects of site selection, evaluation/characterization and site suitability are dealt with. Some results of characterization of a site for tempory storage of low level solid radioactive wastes in Instituto de Pesquisas Energeticas e Nucleares-IPEN-CNEN/Sao Paulo are described. The methods used for hydrological characterization include use of artificial tritium for unsaturated zone and radioactive tracers like I-131, Cr 51 Cl 3 , Cr 51 EDTA, Br 82 for the saturated zone. (Author) [pt

Nuclear research center transformation experience

International Nuclear Information System (INIS)

Diaz, J. L.; Jimenez, J. M.

2001-01-01

As consequence of the changes in the energy polities of each countries in the 80th. many of the Nuclear Research Centres suffered a transformation (more of less deep) in other Research and Development Centres with a wider spectrum that the exclusively nuclear one. This year is the 50 anniversary of the Spanish Centre of Nuclear Research-Junta de Energia Nuclear.The JEN the same as other suffered a deep renovation to become the CIEMAT Centro de Investigaciones Energeticas Medioambientales y Tecnologicas (Research Centre for Energy, Environment and Technology). This paper is focussed on the evolution of JEN to CIEMAT besides analysing the reach of this re-foundation considering the political reasons and technical aspect that justified it and the laws in those it is based on. (Author)

Criteria and evaluation of shallow land burial sites

International Nuclear Information System (INIS)

Chandra, U.

1987-01-01

The criteria for shallow ground disposal of radioactive wastes as developed by Nuclear Regulatory Comission-US and International Atomic Energy Agency are discussed. Emphasis has been given to: elaboration of various basic components of a national strategy for radioactive waste disposal; development of technical requirements; environmental standards, consensus among scientific community and public confidence. Aspects of site selection, evaluation/characterization and site suitability are dealt with. Some results of characterization of a site for temporary storage of low level solid radioactive wastes in Instituto de Pesquisas Energeticas e Nucleares - IPEN - CNEN/Sao Paulo are described. The methods used for hydrological characterization include use of artificial tritium for unsaturated zone and radioactive tracers like I - 131, Cr 51 Cl 3 , Cr 51 EDTA, Br 82 for the saturated zone. (Author) [pt

Optimization of operation schemes in boiling water reactors using neural networks; Optimizacion de esquemas de operacion en reactores de agua en ebullicion usando redes neuronales

Energy Technology Data Exchange (ETDEWEB)

Ortiz S, J. J.; Castillo M, A. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Pelta, D. A., E-mail: juanjose.ortiz@inin.gob.mx [Universidad de Granada, Escuela Superior de Ingenierias, Informatica y Telecomunicacion, C/Daniel Saucedo Aranda s/n, 18071 Granada (Spain)

2012-10-15

In previous works were presented the results of a recurrent neural network to find the best combination of several groups of fuel cells, fuel load and control bars patterns. These solution groups to each problem of Fuel Management were previously optimized by diverse optimization techniques. The neural network chooses the partial solutions so the combination of them, correspond to a good configuration of the reactor according to a function objective. The values of the involved variables in this objective function are obtained through the simulation of the combination of partial solutions by means of Simulate-3. In the present work, a multilayer neural network that learned how to predict some results of Simulate-3 was used so was possible to substitute it in the objective function for the neural network and to accelerate the response time of the whole system of this way. The preliminary results shown in this work are encouraging to continue carrying out efforts in this sense and to improve the response quality of the system. (Author)

Breakeven point for energetic viability for the culture of Jatropha; Produtividade minima para a viabilidade energetica da cultura do pinhao-manso

Energy Technology Data Exchange (ETDEWEB)

Diotto, Adriano V.; Paulino, Janaina; Romanelli, Thiago L.; Flumgnan, Danilton L.; Folegatti, Marcos V. [Escola Superior de Agricultura Luiz de Queiroz (ESALQ/USP), Piracicaba, SP (Brazil)], E-mail: avdiotto@usp.br

2012-11-01

Due to diversity of plants that can be used to produce biofuel, Jatropha is being increasingly studied and some answers have yet to be given by the research to ensure its use as a plant producing energy. The energy balance is a methodology that takes into account all the energy input in the production system, either through direct consumption of fuel for tractors, for example, or indirectly as the added energy to fabricate the tractor Itself. Therefore, we tried to use the energy balance methodology to evaluate the minimum yield necessary to crop the Jatropha to have energetic viability in production, in other words, to have output energy greater than input energy. We evaluated four years of cultivation in a property located in Charqueada-SP. The feasibility breakeven point was 2.36 mg ha{sup -1}. The factors that most influenced the energy input to the system were the crop inputs (64.3%), followed by fuel consumption (39.7%), depreciation of machinery (3.1%) and labor which accounted for only 1.9%. (author)

Optimizacion en procesos cognitivos y su repercusión en el aprendizaje de la danza

OpenAIRE

Megías Cuenca, M. Isabel

2009-01-01

El presente trabajo ha pretendido, en última instancia, acercar la psicología al mundo de la danza: desde la investigación sobre los mecanismos psicológicos que subyacen a este comportamiento (danzar); pasando por la demostración de sus beneficios, también a nivel cognitivo, que repercuten en otras áreas del individuo; hasta la profundización en el proceso de enseñanza/aprendizaje de la danza para buscar la forma de optimizarlo. En su justificación teórica, esta tesis analiza exhaustivame...

The performance of ELETROBRAS, through PROCEL, in the energy efficiency of Brazilian industries; Atuacao da ELETROBRAS, atraves do PROCEL, na eficiencia energetica de industrias brasileiras

Energy Technology Data Exchange (ETDEWEB)

Ferreira, C A; Perrone, F P.D.; Moreira, M A.R.G.; Oliveira, H L; Pinto, A B.A.; Sobral, A S; Motta, B R; Moya, C H; Spera, M R; Vilela, L C.T.; Goes, R.R. de A.; Teixeira, M V.P.; Sobral, R.L. [Centrais Eletricas Brasileiras S.A. (ELETROBRAS), Rio de Janeiro, RJ (Brazil)], E-mail: carlosaparecido@eletrobras.com

2009-07-01

The technical part of this paper defends the idea of accomplishing systemic instead of punctual analysis in motor driven systems at industries, since the energetic efficiency potentials increase when all elements of the motor driven system is analyzed and not only the electrical motor. The institutional part of this paper presents the strategies of PROCEL Industria, executed by ELETROBRAS/PROCEL. The actions of this PROCEL sub program consist, basically, on activities with industrial state federations and universities so as to reduce the electrical energy consumption of motor driven systems in industries, which consumes almost 30% of the total Brazilian electricity consumption. This paper also presents results, experiences and future actions of PROCEL Industria. (author)

Recovery of radiogenic lead-208 from a residue of thorium and rare earths obtained during the operation of a thorium purification pilot plant; Separacao e recuperacao de chumbo-208 dos residuos de torio terras raras gerados na unidade piloto de purificacao de nitrato de torio

Energy Technology Data Exchange (ETDEWEB)

Seneda, Jose Antonio

2006-07-01

Brazil has a long tradition in thorium technology, from mineral dressing (monazite) to the nuclear grade thorium compounds. The estimate reserves are 1200,000. ton of ThO{sub 2}. As a consequence from the work of thorium purification pilot plant at Instituto de Pesquisas Energeticas e Nucleares-CNEN/IPEN-SP, about 25 ton of a sludge containing thorium and rare earths was accumulated. It comes as a raffinate and washing solutions from thorium solvent extraction. This sludge, a crude hydroxide named RETOTER contains thorium, rare earths and minor impurities including the radiogenic lead-208, with abundance 88.34 %. This work discusses the results of the studies and main parameters for its recovery by anionic ion exchange technique in the hydrochloric system. The isotope abundance of this lead was analyzed by high resolution mass spectrometer (ICPMS) and thermoionic mass spectrometer (TIMS) and the data was used to calculate the thermal neutron capture cross section. The value of {sigma}{gamma}{sup 0} = 14.6{+-}0.7 mb was found, quite different from the {sigma}{gamma}{sup 0} = 174.2 {+-} 7.0 mb measure cross section for the natural lead. Preliminary study for the thorium and rare earths separation and recovery was discussed as well. (author)

Recovery of radiogenic lead-208 from a residue of thorium and rare earths obtained during the operation of a thorium purification pilot plant

International Nuclear Information System (INIS)

Seneda, Jose Antonio

2006-01-01

Brazil has a long tradition in thorium technology, from mineral dressing (monazite) to the nuclear grade thorium compounds. The estimate reserves are 1200,000. ton of ThO 2 . As a consequence from the work of thorium purification pilot plant at Instituto de Pesquisas Energeticas e Nucleares-CNEN/IPEN-SP, about 25 ton of a sludge containing thorium and rare earths was accumulated. It comes as a raffinate and washing solutions from thorium solvent extraction. This sludge, a crude hydroxide named RETOTER contains thorium, rare earths and minor impurities including the radiogenic lead-208, with abundance 88.34 %. This work discusses the results of the studies and main parameters for its recovery by anionic ion exchange technique in the hydrochloric system. The isotope abundance of this lead was analyzed by high resolution mass spectrometer (ICPMS) and thermoionic mass spectrometer (TIMS) and the data was used to calculate the thermal neutron capture cross section. The value of σγ 0 = 14.6±0.7 mb was found, quite different from the σγ 0 = 174.2 ± 7.0 mb measure cross section for the natural lead. Preliminary study for the thorium and rare earths separation and recovery was discussed as well. (author)

Wind power, a clean energy alternative; El viento, una alternativa energetica limpia

Energy Technology Data Exchange (ETDEWEB)

Cadenas Tovar, Roberto [Comision Federal de Electricidad, La Venta (Mexico)

1994-12-31

That a new energy source, renewable and environmentally benign is incorporated into our electric networks, is something really significative. What better contribution for the rational use of the conventional energy sources than substituting an important part of its share for a source of the stated characteristics. The wind is a resource that Nature offers US for free, whose energy can be transformed into electricity utilizing conversion technologies that have reached maturity and are currently available in the marketplace. This document presents the characteristics of the aeolian resource in the Tehuantepec Isthmus region. A description is made of the first pilot project in our country built by Comision Federal de Electricidad at La Venta, Oaxaca. The reasoning that support the development of the projects at a greater scale and investment and production costs are exhibited for the above mentioned project. [Espanol] Que una nueva fuente de energia, renovable y ambientalmente benigna se incorpore a nuestras redes electricas, es algo verdaderamente significativo. Que mejor contribucion para el uso racional de los energeticos convencionales que substituir una parte importante de su aportacion con una fuente de las caracteristicas mencionadas. El viento es un recurso que nos brinda la naturaleza en forma gratuita, cuya energia puede transformarse en electricidad utilizando tecnologias de conversion que han alcanzado madurez y que actualmente se encuentran disponibles en el mercado. En este documento se presentan las caracteristicas del recurso eolico en la region del Istmo de Tehuantepec, se hace una descripcion del primer proyecto piloto de nuestro pais, construido por la Comision Federal de Electricidad en La Venta, Oaxaca, se exponen los argumentos que apoyan al desarrollo de proyectos en mayor escala y se exhiben los costos de inversion y produccion para el proyecto mencionado.

Nuclear energy I, Non-energetic applications; Energia Nuclear I, Aplicaciones no energeticas

Energy Technology Data Exchange (ETDEWEB)

Lartigue G, J; Navarrete T, M; Cabrera M, L; Arandia, P A; Arriola S, H [Facultad de Quimica, 04510 Mexico D.F. (Mexico)

1986-07-01

The nuclear energy is defined as the energy produced or absorbed in the nuclear reactions, therefore, these are divided in endothermic and exothermic. The exothermic nuclear reactions present more interest from the point of view of its applications and they can show in four main forms: radioactivity (from 0 to 4 MeV/reaction; light nucleus fusion ( {approx} 20 MeV/reaction), heavy nucleus fusion ({approx} 200 MeV/reaction) and nucleons annihilation ( {approx} 2000 MeV/reaction). Nowadays only the fission has reached the stage of profitable energetic application, finding the other three forms in research and development. The non-energetic applications of the nuclear energy are characterized by they do not require of prior conversion to another form of energy and they are made through the use of radioisotopes as well as through the use of endothermic reaction caused in particle accelerators. In this work are presented some of the non-energetic applications with its theoretical and experimental basis as well as its benefits of each one. (Author)

Approach to a sustainable energy management; Enfoque para una gestion energetica sustentable

Energy Technology Data Exchange (ETDEWEB)

Betti, Maria Cristina [Universidad Nacional de La Plata (UNLP), Buenos Aires (Argentina). Facultad de Ciencias Juridicas y Sociales

2004-07-01

This article describe the challenges to a sustainable energy management pointing that the success or failure of these challenges will be determined by the level of commitment that players have with the objectives pursued, the firmness of the decision making process, the economical, technical and financial support Also available and the political, economical and social development condition of each individual country.

Industrial refrigeration by absorption/compression; Refrigeracion industrial por absorcion/compresion

Energy Technology Data Exchange (ETDEWEB)

Ayala Delgado, Ramon; Heard, Christopher Lionel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

The use of the absorption/compression refrigeration in the industrial area is analyzed. It is estimated than in Mexico 50% of the food is wasted for lack of refrigeration in the producing centers and by the inefficient distribution system, as well as for the hot climate. The functioning of the absorption refrigeration and the hybrid system absorption/compression which can operate with the two thermodynamic cycles in variable proportions, depending on the specific application, looking for operational advantages and energy efficiency is described. This type of technology could be applied in Mexico due to the lack of industrial refrigeration and to the need of substituting compressors in some companies which have up to 20 years of use [Espanol] Se analiza el uso de la refrigeracion por absorcion/compresion en el area industrial. En Mexico se estima que se desperdicia el 50% de los alimentos por falta de refrigeracion en los centros productores y por el deficiente sistema de distribucion, asi como por el clima calido. Se describe el funcionamiento de la refrigeracion por absorcion y la refrigeracion por absorcion/compresion o sistema hibrido, el cual puede funcionar con los dos tipos de ciclos termodinamicos, en proporciones variables, dependiendo de la aplicacion especifica, buscando ventajas de operacion y eficiencia energetica. Este tipo de tecnologia podria aplicarse en Mexico debido a la falta de refrigeracion industrial y a la necesidad de sustituir compresores en algunas empresas los cuales tienen hasta 20 anos de uso

Industrial refrigeration by absorption/compression; Refrigeracion industrial por absorcion/compresion

Energy Technology Data Exchange (ETDEWEB)

Ayala Delgado, Ramon; Heard, Christopher Lionel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

The use of the absorption/compression refrigeration in the industrial area is analyzed. It is estimated than in Mexico 50% of the food is wasted for lack of refrigeration in the producing centers and by the inefficient distribution system, as well as for the hot climate. The functioning of the absorption refrigeration and the hybrid system absorption/compression which can operate with the two thermodynamic cycles in variable proportions, depending on the specific application, looking for operational advantages and energy efficiency is described. This type of technology could be applied in Mexico due to the lack of industrial refrigeration and to the need of substituting compressors in some companies which have up to 20 years of use [Espanol] Se analiza el uso de la refrigeracion por absorcion/compresion en el area industrial. En Mexico se estima que se desperdicia el 50% de los alimentos por falta de refrigeracion en los centros productores y por el deficiente sistema de distribucion, asi como por el clima calido. Se describe el funcionamiento de la refrigeracion por absorcion y la refrigeracion por absorcion/compresion o sistema hibrido, el cual puede funcionar con los dos tipos de ciclos termodinamicos, en proporciones variables, dependiendo de la aplicacion especifica, buscando ventajas de operacion y eficiencia energetica. Este tipo de tecnologia podria aplicarse en Mexico debido a la falta de refrigeracion industrial y a la necesidad de sustituir compresores en algunas empresas los cuales tienen hasta 20 anos de uso

Study and determination of the influence factors of the radiopharmaceutical vials dimensions used for actimeter calibration at IPEN; Estudo e determinacao de fatores de influencia das dimensoes dos frascos de radiofarmacos utilizados no IPEN para calibracao de ativimetros

Energy Technology Data Exchange (ETDEWEB)

Martins, Elaine Wirney

2010-07-01

The efficiency and safety of the nuclear medicine practice depend, among others factors, of a quality control programme, mainly related to the use of the nuclide activity meters (activimeter). One of the most important sources of errors in the activimeter measurements is the thickness, size and volume of the vial that contains the radiopharmaceutical considering that a typical activimeter has its response dependent of the vial used. The objective of this work was to establish a quality control programme and the correction factors for the geometry of the vials used for distribution of radiopharmaceutical and activimeters calibration, considering that the Calibration Laboratory of Instruments (LCI) of the Instituto de Pesquisas Energeticas e Nucleares (IPEN) has a NPL-CRC Secondary Standard Radionuclide Calibrator System, manufactured for the Southern Scientific plc, compound by an ionization chamber well type and a current measurement system, with traceability to National Physical Laboratory (NPL) and calibrated with a P6 vial type with different dimensions of the one used for the IPEN. The radiopharmaceutical produced by IPEN {sup 67}Ga, '1{sup 31}I, {sup 201}Tl and {sup 99}mTc, had been tested using the two different vials. The results shown a maximum variation of 22% for {sup 201}Tl, and the minimum variation was 2.98% for {sup 131}I. The correction factors must be incorporated in the routine calibration of the activimeters. (author)

Ageing implementation and refurbishment development at the IEA-R1 nuclear research reactor: a 15 years experience

International Nuclear Information System (INIS)

Cardenas, Jose Patricio N.; Ricci Filho, Walter; Carvalho, Marcos R. de; Berretta, Jose Roberto; Marra Neto, Adolfo

2011-01-01

IPEN (Instituto de Pesquisas Energeticas e Nucleares) is a nuclear research center established into the Secretary of Science and Technology from the government of the state of Sao Paulo, and administered both technically and financially by Comissao Nacional de Energia Nuclear (CNEN), a federal government organization under the Ministry of Science and Technology. The institute is located inside the campus of the University of Sao Paulo, Sao Paulo city, Brazil. One of major nuclear facilities at IPEN is the IEA-R1 nuclear research reactor. It is the unique Brazilian research reactor with substantial power level suitable for application with research in physics, chemistry, biology and engineering, as well as radioisotope production for medical and other applications. Designed and built by Babcok-Wilcox, in accordance with technical specifications established by the Brazilian Nuclear Energy Commission, and financed by the US Atoms for Peace Program, it is a swimming pool type reactor, moderated and cooled by light water and uses graphite and beryllium as reflector elements. The first criticality was achieved on September 16, 1957 and the reactor is currently operating at 4.0 MW on a 64h per week cycle. Since 1996, an IEA-R1 reactor ageing study was established at the Research Reactor Center (CRPq) related with general deterioration of components belonging to some operational systems, as cooling towers from secondary cooling system, piping and pumps, sample irradiation devices, radiation monitoring system, fuel elements, rod drive mechanisms, nuclear and process instrumentation and safety operational system. Although basic structures are almost the same as the original design, several improvements and modifications in components, systems and structures had been made along reactor life. This work aims to show the development of the ageing program in the IEA-R1 reactor and the upgrading (modernization) that was carried out, concerning several equipment and system in the

Ageing implementation and refurbishment development at the IEA-R1 nuclear research reactor: a 15 years experience

Energy Technology Data Exchange (ETDEWEB)

Cardenas, Jose Patricio N.; Ricci Filho, Walter; Carvalho, Marcos R. de; Berretta, Jose Roberto; Marra Neto, Adolfo, E-mail: ahiru@ipen.b, E-mail: wricci@ipen.b, E-mail: carvalho@ipen.b, E-mail: jrretta@ipen.b, E-mail: amneto@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2011-07-01

IPEN (Instituto de Pesquisas Energeticas e Nucleares) is a nuclear research center established into the Secretary of Science and Technology from the government of the state of Sao Paulo, and administered both technically and financially by Comissao Nacional de Energia Nuclear (CNEN), a federal government organization under the Ministry of Science and Technology. The institute is located inside the campus of the University of Sao Paulo, Sao Paulo city, Brazil. One of major nuclear facilities at IPEN is the IEA-R1 nuclear research reactor. It is the unique Brazilian research reactor with substantial power level suitable for application with research in physics, chemistry, biology and engineering, as well as radioisotope production for medical and other applications. Designed and built by Babcok-Wilcox, in accordance with technical specifications established by the Brazilian Nuclear Energy Commission, and financed by the US Atoms for Peace Program, it is a swimming pool type reactor, moderated and cooled by light water and uses graphite and beryllium as reflector elements. The first criticality was achieved on September 16, 1957 and the reactor is currently operating at 4.0 MW on a 64h per week cycle. Since 1996, an IEA-R1 reactor ageing study was established at the Research Reactor Center (CRPq) related with general deterioration of components belonging to some operational systems, as cooling towers from secondary cooling system, piping and pumps, sample irradiation devices, radiation monitoring system, fuel elements, rod drive mechanisms, nuclear and process instrumentation and safety operational system. Although basic structures are almost the same as the original design, several improvements and modifications in components, systems and structures had been made along reactor life. This work aims to show the development of the ageing program in the IEA-R1 reactor and the upgrading (modernization) that was carried out, concerning several equipment and system in the

Energy policy and the socio-environmental impacts: an interdisciplinary experience; A politica energetica e os impactos socio-ambientais: uma experiencia interdisciplinar

Energy Technology Data Exchange (ETDEWEB)

Coelho, Ilsa Valois; Cartaxo, Elizabeth Ferreira [Universidade Federal do Amazonas (NIEMA/UFAM), Manaus, AM (Brazil). Nucleo Interdisciplinar de Energia, Meio Ambiente e Agua

2010-07-01

This paper shows a dissertation in a demand side generation project (DSM) in order to reduce electricity consumption in the city of Manaus / AM. It demonstrates the relationship between production processes and the impacts on nature and society showing the difficulty of matching different knowledge in the implementation of policies involving Environment and Society. The alienation resulting from inadequate educational proposals is treated as a serious barrier to behavioral changes which are important for the awakening of environmental consciousness. The research is inserted in the Amazonian reality, isolated from the national electric system and proposes marriage of technological knowledge to the educational tools in order to leverage the acquisition of values more rational and efficient. Funded by CAEMAs project (Air Conditioner, Energy and Environment) and by the Energy Efficiency Program of electric utility Manaus, the study referenced in this article was performed by the Interdisciplinary Center for Energy, Environment and Water (ICEEW), from Federal University of Amazonas. Reflections on the efficiency of energy policies and its suitability for the state of Amazonas point to contradictions inherent in capitalist development model, concluding that if the quest for change is within the limits of convenience economic and political of power system, are lost or are diluted the well-intentioned actions. (author)

Study of the effect of irradiation of Mo targets at nuclear reactor

International Nuclear Information System (INIS)

Nieto, Renata C.; Lima, Ana Lucia V.P.; Silva, Nestor C. da; Osso Junior, Joao Alberto

2000-01-01

The most used radioisotope in nuclear medicine is 99m Tc, in the 99 Mo- 99m Tc generator form. 99 Mo can be produced by several nuclear reactions in reactors and cyclotrons. The cyclotron production is not technically and economically viable. The production in the reactor can be done in two different ways: by the fission of 235 U and by the 98 Mo(n,γ) 99 Mo reaction. A project for the production of 99 Mo by the activation of Mo and the preparation of gel type generators is under development at the 'Instituto de Pesquisas Energeticas e Nucleares'. In the present work, the radionuclidic impurities produced in the activation of MoO 3 , metallic Mo and Mo Zr gel were evaluated, as well as the radionuclidic purity of 99m Tc eluted from generators prepared. (author)

Geothermal infrastructure for an historic village in Tuscany: a sustainable retrofit solution

Directory of Open Access Journals (Sweden)

Valentina Marino

2016-06-01

Full Text Available Il comune di Montieri ha recentemente costruito una rete di teleriscaldamento alimentata a vapore geotermico. L’aspetto innovativo risiede nell’uso del vapore geotermico di scarto dalla produzione di elettricità, per fornire riscaldamento e acqua calda sanitaria per 425 utenze del centro storico. Con il progetto Geothermal Community (Concerto, FP7 sono stati intrapresi ulteriori obiettivi per l’ambiente costruito: la riduzione del consumo energetico degli edifici e l’aumento della quota delle risorse energetiche rinnovabili utilizzate dalla comunità. L’articolo propone una analisi dei benefici ambientali ed economici delle misure di efficienza energetica pianificate dal progetto Europeo alla luce dell’installazione della rete di teleriscaldamento. I risultati presentano uno spunto di riflessione interessante per la formulazione dei piani di riduzione delle emissioni delle aree urbane storiche Italiane ed Europee dove sono presenti simili infrastrutture. 

Experimental energetic analysis of gas natural-powered fuel cell cogeneration plant; Analise energetica experimental de uma planta de co-geracao com celulas a combustivel e gas natural

Energy Technology Data Exchange (ETDEWEB)

Furtado, Jose G.M.; Lopes, Francisco C.; Silva Junior, Fernando R.; Soares, Guilherme F.W.; Serra, Eduardo T. [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil)

2008-07-01

Power systems based on fuel cells have been considered for residential and commercial applications in energy Distributed Generation (DG) market as these systems can minimize their acquisition, installation and operation high costs. In this work we present an experimental analysis of a power generation system formed by a 5 kW proton exchange membrane fuel cell unit and a natural gas reformer (fuel processor) for hydrogen production, of the CEPEL's Fuel Cell Laboratory. It was determined the electrical performance of the cogeneration system in function of the design and operational power plant parameters. Additionally, it was verified the influence of the activation conditions of the fuel cell electrocatalytic system on the system performance. It also appeared that the use of hydrogen produced from the natural gas catalytic reforming provided the system operation in excellent electrothermal stability conditions resulting in increase of the energy conversion efficiency and of the economy of the cogeneration power plant. The maximum electrical efficiency achieved was around 38% and in all power range unit operated with average potential per single fuel cell higher than 0.60 V. (author)

General comments on radiological patient protection in nuclear medicine

Energy Technology Data Exchange (ETDEWEB)

Tellez de Cepeda, M; Plaza, R; Corredoira, E [Servicio de Radiofisica y Radioproteccion, Hospital Universitario La Paz, Madrid (Spain); Martin Curto, L M [Servicio de Medicina Nuclear, Hospital Universitario La Paz, Madrid (Spain)

2001-03-01

In this paper an observation series about different aspects of the radiological protection of the patient in nuclear medicine is provided. It includes: The specific legislation contribution, the justification and, especially, optimization, as a fundamental base of the quality guarantee program, the importance of the fulfillment of the program and the importance of getting done the corresponding internal audits of the pursuit, the communication between the different groups of professionals implicated and between these and the patient, the volunteers who collaborate in the patient's care and the people in the patient's environment, knowing that the patient is a source of external radiation and contamination. (author) [Spanish] Se resumen en este trabajo, una serie de observaciones sobre distintos aspectos de la proteccion radiologica del paciente en Medicina Nuclear que incluyen: El aporte de la legislacion especifica, los principios de justificacion y optimizacion (en especial este ultimo) como base fundamental del programa de garantia de calidad asi como la importancia de que dicho programa se cumpla y se lleven a cabo las correspondientes auditorias internas de seguimiento, la comunicacion tanto entre los diferentes grupos de profesionales implicados como entre estos y el paciente, los voluntarios que colaboran en su cuidado y las personas de su entorno, teniendo en cuenta que el paciente es una fuente de radiacion externa y contaminacion. (author)

Feasibility of implementation of an autonomous hybrid system for PEM fuel cells to electrify localities in rural Cuba; Factibilidad de implementacion de un sistema hibrido autonomo con celda de combustible PEM para electrificar localidades rurales en Cuba

Energy Technology Data Exchange (ETDEWEB)

Sanchez Torres, Yamir [Centro de Estudios de Tecnologias Energeticas Renovables (CETER), Ciudad de la Habana (Cuba)] e-mail: yamir@ceter.cujae.edu.cu

2009-09-15

The use of PEM fuel cells to produce electric energy in autonomous systems is closely linked with the production and storage of hydrogen. Eventually joined with sources of renewable energy, this creates an ecologically clean and sustainable system. In several developing countries, localities exist that do not have electricity but have significant unexploited renewable energy power, where an autonomous hybrid system can be designed to electrify these population centers. This work presents a hybrid electricity scheme with a PEM fuel cell to produce hydrogen and electricity in order to electrify rural zones far from the national power grid in Cuba. The electric demand of the zone and available energy power was calculated using the informatics modeling and simulation programs HOMER, PVSYST and Matlab 1,2,3. Variability in wind and photovoltage power was determined based on daylight hours and seasonal periods throughout the year as well as their effect on the production of hydrogen and electricity. It was shown that the energy demand is met even for the most adverse scenarios. This work offers a detailed description of the behavior of the system and evidence of no effect on the environment, enabling the electrification and wellbeing of residents of the locality. [Spanish] El uso de celdas de combustible PEM para la produccion de energia electrica en sistemas autonomos esta estrechamente ligado a la produccion y almacenamiento de hidrogeno. Esto eventualmente unido a las fuentes renovables de energia forma un sistema ecologicamente limpio y sustentable. En varios paises subdesarrollados existen localidades que no cuentan con electricidad y que tienen importantes potenciales energeticos renovables no explotados actualmente en los cuales se puede disenar un sistema hibrido autonomo para electrificar estas poblaciones. En este trabajo se presenta el esquema de un sistema hibrido autonomo con celda de combustible PEM, para la produccion de hidrogeno y electricidad encaminado

Application of an evolutionary algorithm in the reactive compensation of transmission networks of electrical energy planning; Aplicacion de un algoritmo evolutivo en la planificacion de la compensacion reactiva de redes de transmision de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Hernandez Galicia, Julio A.; Nieva Gomez, Rolando [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2001-07-01

In the present work it is considered the mathematical formulation of the problem of the reactive compensation planning, The solution technique based on evolutionary programming is described and the results of compensation in the Northwest subsystem of the Mexican electrical system are shown. A technique of optimization based on the Evolutionary Programming is proposed to solve the problem of the Planning of the Reactive Compensation in transmission of electrical energy networks. The problem consists in determining how much compensation to add and where to locate it in such a way that the investment cost of the compensation equipment is diminished, plus the operation costs associated to the transmission losses, plus a penalty function associated to the violations of the operative limits of voltage. The compensation that is determined must allow that the network operates in normal conditions before any contingency of a pre-established assembly. The problem considered is non-linear and whole compound. Tests made to a representative system of the Northwest area of the Mexican electrical system of 171 nodes and 284 branches are reported. [Spanish] En el presente trabajo se plantea la formulacion matematica del problema de planificacion de la compensacion reactiva, se describe la tecnica de solucion basada en programacion evolutiva y se muestra resultados de compensacion en el subsistema Noroeste del sistema electrico mexicano. Se propone una tecnica de optimizacion basada en la Programacion Evolutiva para resolver el problema de la Planificacion de la Compensacion Reactiva en redes de transmision de energia electrica. El problema consiste en determinar cuanta compensacion agregar y donde ubicarla de tal manera que se minimice el costo de inversion del equipo de compensacion, mas los costos de operacion asociados a las perdidas de transmision, mas una funcion de penalizacion asociada a la violaciones de los limites operativos de voltaje. La compensacion que se determine

OPTIMIZACION DE LAS PROPIEDADES DE TRANSPORTE IONICO DEL CONCRETO Y SIMULACION DEL ENSAYO ASTM C1202

Directory of Open Access Journals (Sweden)

JUAN LIZARAZO MARRIAGA

2009-01-01

Full Text Available En este artículo se presentan los resultados de la simulación computacional del flujo de los principales iones presentes (Cl-, OH-, Na+, y K+ en un ensayo ASTM C1202: "Indicación eléctrica de la resistencia del concreto a la penetración de Iones cloruro". Para la modelación se utilizó un esquema de diferencias finitas definido mediante la ecuación de Nernst - Plank con un campo eléctrico variable, la cual describe los movimientos iónicos en un material poroso saturado. Para lograr esto, los resultados de un nuevo ensayo electroquímico diseñado para medir el potencial de membrana, en compañía de la corriente eléctrica, fueron optimizados para obtener los coeficientes intrínsicos de difusión, la composición inicial de la solución de poros, la capacidad de fijación de cloruros y la porosidad de la mezcla de concreto.

Survey of energy efficiency programs for motor systems in the industry and the main results of PROCEL Info; Levantamento dos programas de eficiencia energetica para sistemas motrizes na industria e os principais resultados do PROCEL Info

Energy Technology Data Exchange (ETDEWEB)

Naturesa, Jim Silva; Mariotoni, Carlos Alberto [Universidade Estadual de Campinas (GPESE/UNICAMP), SP (Brazil). Dept. de Recursos Hidricos, Energeticos e Ambientais. Grupo de Planejamento Energetico e Sistemas Eletricos; Menezes, Taciana de V.; Perrone, Fernando Pinto Dias; Lepetitgaland, Karla Kwiatkowski [Centrais Eletricas Brasileiras S.A. (ELETROBRAS), Brasilia, DF (Brazil)

2008-07-01

This article has as objective to compare the actual energy efficiency programs for the motor driven systems of Brazil, United States and European Community. This comparison will be restricted to the action of each program, considering that the countries present distinct economical, political and social aspects. The main results of PROCEL Info will be presented. (author)

Results on the application of the methodology for power diagnoses Iac-DOE to Mexican companies; Resultados de la aplicacion de la metodologia de diagnosticos energeticos Iac-DOE a empresas mexicanas

Energy Technology Data Exchange (ETDEWEB)

Ambriz Garcia, Juan Jose [Universidad Autonoma de Mexico, Mexico, D.F. (Mexico)

2001-07-01

This work presents an analysis of the results of eight industrial power audits made in Mexico by a team of professors and students of the Universidad Autonoma Metropolitana-Ixtapalapa (UAM), following the methodology of the Centers of Industrial Consultant's office and Analyses and Power Diagnoses sponsored by the Office of Industrial Technologies of the Department of Energy of the United Studies (IAC-DOE Program). In these diagnosis studies, that could be classified as of fast execution, it was possible to find and to evaluate from 6 to 13 actions by company to increase their energy efficiency. This represents at the moment between 6 and 29% of the currently used energy, being the average 18.4%. The equivalent economic saving ascends to a value between 7 and 31% of the total paid, with an average value of 13.8%. Finally, the simple period of return for the saving recommendations is of 0.87 years, with an average number of 0.51 years for the actions focused to the saving of thermal energy and 1.52 years for the actions that improve the use of the electric energy. [Spanish] Este trabajo se presenta un analisis de los resultados de ocho auditorias energeticas industriales realizadas en Mexico por un equipo de profesores y estudiantes de la Universidad Autonoma Metropolitana-Iztapalapa (UAM), siguiendo la metodologia de los Centros de Asesoria Industrial y de Analisis y Diagnosticos Energeticos patrocinados por la Oficina de Tecnologias Industriales del Departamento de Energia de los Estudios Unidos (Programa IAC-DOE). En estos estudios de diagnostico, que podrian ser clasificados como de rapida ejecucion, fue posible encontrar y evaluar de 6 a 13 acciones por empresa para incrementar su eficiencia energetica. Esto representa entre 6 y 29% de la energia empleada actualmente, siendo el promedio del 18.4%. El ahorro economico equivalente asciende a un valor entre 7 y 31% del total pagado, con un valor promedio de 13.8%. Finalmente, e periodo simple de retorno para

National Energy Strategy 2012-2026; Estrategia Nacional de Energia 2012-2026

Energy Technology Data Exchange (ETDEWEB)

Direccion General de Planeacion Estrategica, Secretaria de Energia, Mexico, D.F. (Mexico)

2012-02-15

In compliance with the provisions of the Congress, the National Energy Strategy 2012-2026 (NES) outlines the direction of the Mexican energy sector with a horizon of 15 years. Its vision is supported by a comprehensive planning exercise that collects information from each of the parastatals and decentralized administrative bodies that make up the sector. This ensures the accuracy and relevance of information presented throughout the document and integrates the perspectives of all public bodies involved. From that interagency and interdisciplinary approach, the NES provides energy policy guidelines that are essential to realize this vision. In turn, these serve to construct detailed criteria of public policy. Finally, the NES raises specific targets for 2026, which can be achieved based on the implementation of actions considered within the planning guidelines. The NES is a prospective tool and indicative that stands as a useful tool for any plan or program. To serve as an instrument of dialogue between institutions and authorities, NES is a document with a solid vision and a planned role in Mexico's energy policy. [Spanish] En cumplimiento por lo establecido por el Congreso de la Union, la Estrategia Nacional de Energia 2012-2026 (ENE) delinea el rumbo del sector energetico mexicano con un horizonte de 15 anos. Su vision esta sustentada en un ejercicio integral de planeacion que recaba informacion de cada una de las entidades paraestatales y organos administrativos desconcentrados que conforman el sector. Esto garantiza la precision y pertinencia de la informacion presentada a lo largo del documento e integra las perspectivas de todos los entes publicos involucrados. A partir de ese enfoque interinstitucional e interdisciplinario, la ENE establece los lineamientos de politica energetica que son indispensables para materializar esta vision. A su vez, estos sirven para construir criterios detallados de politica publica. Finalmente, la ENE plantea metas concretas

Background and evolution of solar control systems in the architecture; Antecedentes y evolucion de los sistemas de control solar en la arquitectura

Energy Technology Data Exchange (ETDEWEB)

Rodriguez Viqueira, Manuel; Fuentes Freixanet Victor [Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

2000-07-01

This paper is a reflection on the tradition and evolution of the use of solar control systems as a solution to the architectonic problem that arises from the solar radiation excess in the inhabitable spaces and its comfort conditions. The study has been structured from a historical-geographic vision of the architecture, showing the universality and the rationality of the solutions before certain environmental and climatologic conditions. That allows to arrive to the conclusion that similar architectonic solutions, as much in the functional aspect as in which refers to the use of the materials, that might not be related among them, and be independent in the space and time. To seat at the shade of a tree in a warm and sunned day, we quickly associated it to the pleasantness sensation, be this in a climate: dry, humid or template. This is the way we must conceive the solar control, as a tool for the bioclimatic design where we look for an increasing of the comfort sensation, in the architectonic spaces, with an optimization of the energy resources. In general terms the solar control devices, (of solarization) can be grouped in those of architectonic type, that is to say, those that are integrated and comprise the same architecture, and those non-architectonic, that is to say, those that do not comprise in it in a direct way. On the basis of this characterization we will enunciate the main devices of each one of the typologies or groups. [Spanish] Este trabajo es una reflexion sobre la tradicion y evolucion del uso de dispositivos de control solar como solucion al problema arquitectonico que surge del exceso de radiacion solar en los espacios habitables y las condiciones de confort en los mismos. El estudio se ha estructurado a partir de una vision historico-geografica de la arquitectura, mostrando la universalidad y la racionalidad de las soluciones ante determinadas condiciones ambientales y climatologicas. Lo que permite llegar a la conclusion de que soluciones

The water-energy relationship: energy management on water supply systems of Brazil's sanitation companies; A relacao entre agua e energia: gestao energetica nos sistemas de abastecimento de agua das companhias de saneamento basico do Brasil

Energy Technology Data Exchange (ETDEWEB)

Moura, Gustavo Nikolaus Pinto de

2010-03-15

Energy and water resources are related in various ways, among which is the use of electric power in Water Supply Systems (WSS). This dissertation identifies actions that can be carried out under the adoption of energy management systems by sanitation companies in order to better use energy resources and, therefore, water resources. The importance of the input electric power to the WSS is presented, as well as the inefficiency of its use mainly due to losses in distribution networks, inappropriate operational routine and inadequate equipment. Two studies were conducted to evaluate the performance of possible actions for energy management in the WSS. The first action was the energy performance indicators use in hypothetical WSS, and the second, the use of EPANET 2.0 simulation software to verify the feasibility of the frequency converter equipment in the water network distribution of the Federal University of Rio de Janeiro's Environmental Sanitation Centre. (author)

Reto Europeo: la Eficiencia Energetica en Edificios. La Nueva Directiva Comunitaria 31/2010

Directory of Open Access Journals (Sweden)

Fernández, Pablo Sandoval

2011-08-01

Full Text Available Abstract: The new European Directive2010/31 is trying to achieve a 20%reduction in greenhouse gas emissionsbellow 1990 levels, and by 30% in theevent of an international agreementbeing. The E.U. has a major goal to reduceour oil dependency and use morerenewable energy, especially in buildingswhere 40% of the total energy consumptiontakes place. The Directive wants toestablish a plan to achieve our goal tocompletely reduce the use of energy inbuildings by 2020. The new buildingsoccupied and owned by public authoritiesmust comply with the proposed regulationby 2018 to serve as an exampleto the private sector. By increasing renewableenergy sources the goal is to reducethe Greenhouse effect since we arealready noticing it in our daily lives andcontinuing being the global and multilateralengine of the policies against theClimate Change.Resumen: La nueva Directiva Comunitaria31/2010 pretende la consecución de una reducciónde los gases de efecto invernadero en un20% con respecto a 1990, que podría incrementarseen un 30% si existe un compromiso internacional.La UE se ha marcado como objetivo lasustitución del empleo de combustibles fósilespor energías renovables y una mayor eficienciaenergética, especialmente en los edificios dondese consume el 40% del total de energía de la UE.Esta Directiva establece la obligatoriedad de losEstados miembros de adoptar políticas y planespara conseguir que los edificios de nueva construcciónsean de consumo de energía nulo en el2020. Los edificios de titularidad pública deberánadelantarse al 2018 en dicho objetivo comopapel ejemplarizante que toda Administracióndebe jugar. Con este paso y con una sustituciónprogresiva del empleo de combustibles fósilespor energías renovables, la UE pretende mitigarlos graves efectos del calentamiento global, queya empezamos a notar en nuestra vida cotidiana,y continuar siendo el motor global y multilateralde las políticas contra el Cambio Climático.

Neutron activation analysis at the 'Instituto de Pesquisas Energeticas e Nucleares' (SP, Brazil)

International Nuclear Information System (INIS)

Vasconcellos, M.B.A.

1984-01-01

A review of the work carried out at IPEN using neutron activation analysis is made. The main characteristics of the technique and general experimental procedures applied for different samples and elements are reported. Geological samples were analysed by using activation with thermal, epithermal and delayed neutrons (for U and Th, specifically). Metallic samples were analysed for several elements in trace amounts (Ta in Nb, Hg in steel, Sn, Sb, As, Cu, Cr and Ag in a tin-lead alloy). Biological materials, such as tomatoes, animal and human viscera, food, hair, nails were also analysed for several components (Hg, Na, K, As, Au and others). (Author) [pt

Strategic pathways for energy in Brazil; Os caminhos da eficiencia energetica no Brasil

Energy Technology Data Exchange (ETDEWEB)

Poole, Alan Douglas; Hollanda, Jayme Buarque de; Tolmasquim, Mauricio Tiomno

1995-01-01

The aim of this work is to suggest steps and policies to increase the introduction of cost-effective energy in conservation measures in Brazil. This report first addresses the motivations for a policy of energy efficiency and summarizes experiences in Brazil. It then considers the roles and perspectives of the diverse agents and review the instruments of policy. It concludes with an overview of strategic needs and lines of action.

Energy conservation programs developed by PETROBRAS; Programas de eficiencia energetica desenvolvidos pela PETROBRAS

Energy Technology Data Exchange (ETDEWEB)

Maues, Jair Arone; Marinho, Frederico Augusto Varejao [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

2008-07-01

The two oil shocks of the 70s provoked a great swerve of course in PETROBRAS during the 80s and 90s. The most important and well known was the strategic decision of exploring oil under the sea. Another important area of the Company includes internal programs for cutting its own energy use and external programs, encouraging their products end-users to rationalize fuel's use. After 1974, our refineries concentrated efforts in level reduction of self-consumption fuel. In the 90s, the Federal Government introduced two energy conservation programs. One created Energy Saving Internal Committees - CICE - in all PETROBRAS' operational units. Another one established a National Program for Oil and Natural Gas Conservation - CONPET. PETROBRAS is in charge of the development and implementation of projects related to this. All these efforts were thoroughly successful. The currently oil production is higher than the country consumption. Nonetheless, as new exploratory frontiers must develop to hold this self-sufficiency in progress, conservation energy programs also have to be continuously updated. This paper presents a balance of the projects implemented since the creation of both programs, a critical analysis on the achieved results and, finally, suggestions on how to improve the effective accomplishment of the initially proposed targets. (author)

Energy conservation programs developed by PETROBRAS; Programas de eficiencia energetica desenvolvidos pela PETROBRAS

Energy Technology Data Exchange (ETDEWEB)

Maues, Jair Arone; Marinho, Frederico Augusto Varejao [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

2008-07-01

The two oil shocks of the 70s provoked a great swerve of course in PETROBRAS during the 80s and 90s. The most important and well known was the strategic decision of exploring oil under the sea. Another important area of the Company includes internal programs for cutting its own energy use and external programs, encouraging their products end-users to rationalize fuel's use. After 1974, our refineries concentrated efforts in level reduction of self-consumption fuel. In the 90s, the Federal Government introduced two energy conservation programs. One created Energy Saving Internal Committees - CICE - in all PETROBRAS' operational units. Another one established a National Program for Oil and Natural Gas Conservation - CONPET. PETROBRAS is in charge of the development and implementation of projects related to this. All these efforts were thoroughly successful. The currently oil production is higher than the country consumption. Nonetheless, as new exploratory frontiers must develop to hold this self-sufficiency in progress, conservation energy programs also have to be continuously updated. This paper presents a balance of the projects implemented since the creation of both programs, a critical analysis on the achieved results and, finally, suggestions on how to improve the effective accomplishment of the initially proposed targets. (author)

Cogeneration: A solution from energetical auditoring. Cogeneracion: hipotesis de solucion en auditorias energeticas

Energy Technology Data Exchange (ETDEWEB)

Gomara Martinez, E; Riesco Leal, P

1993-01-01

An energetical auditor provides the solutions to avoid environmental problems generated from the consumption of a determined fuel and reduces fuel consumption. One of the solutions is changing the energy source or introducing cogeneration. The author introduces under the point of view of an auditor the reasons to use to generation. (Author)

Optimization of enrichment distributions in nuclear fuel assemblies loaded with Uranium and Plutonium via a modified linear programming technique

Energy Technology Data Exchange (ETDEWEB)

Cuevas Vivas, Gabriel Francisco

1999-12-01

number of enrichments is accomplished with this methodology. [Spanish] Se ha desarrollado y probado una metodologia para optimizar las distribuciones de enriquecimiento de ensambles de combustible nuclear en Reactores de Agua Ligera (LWR). La tecnica de optimizacion empleada es el metodo revisado simplex de programacion linear y el desempeno del ensamble de combustible se evalua con un codigo de transporte de neutrones que tambien se utiliza en el calculo de los coeficientes de susceptibilidad. El procedimiento de optimizacion de la distribucion del enriquecimiento empieza desde una distribucion de enriquecimiento de un solo-valor (plano) hasta que se logra una meta factor pico de la maxima potencia local. La distribucion optima de barras para el enriquecimiento, con 1.00 para el factor de pico de maxima potencia local y teniendo cada barra su propio enriquecimiento, se calcula en una etapa intermedia del analisis. Posteriormente, las mejores ubicaciones y valores para un reducido numero de enriquecimiento de barras, se obtiene como una funcion del factor pico de la maxima potencia local, mediante la aplicacion de la sensibilidad al cambio de tecnicas. Finalmente, se lleva a cabo un proceso de barajar que asigna enriquecimiento individual entre los grupos de enriquecimiento de barras. La potencia relativa de distribucion de barras de potencia se modifica entonces ligeramente y se redefine el agrupamiento de barras hasta que se logra una configuracion optima. Para verificar la precision de la disposicion de barras.

Determination of the worst case for cleaning validation of equipment used in the radiopharmaceutical production of lyophilized reagents for {sup 99m}Tc labelling

Energy Technology Data Exchange (ETDEWEB)

Porto, Luciana Valeria Ferrari Machado; Fukumori, Neuza Taeko Okasaki; Matsuda, Margareth Mie Nakamura, E-mail: luciana.porto@anvisa.gov.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Radiofarmacia

2016-01-15

Cleaning validation, a requirement of the current Good Manufacturing Practices (cGMP) for Drugs, consists of documented evidence that cleaning procedures are capable of removing residues to predetermined acceptance levels. This report describes a strategy for the selection of the worst case product for the production of lyophilized reagents (LRs) for labeling with {sup 99m}Tc from the Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/Sao Paulo). The strategy is based on the calculation of a 'worst case index' that incorporates information about drug solubility, cleaning difficulty, and occupancy rate in the production line. It allowed a reduction in the required number of validations considering the possible manufacturing flow of a given product and the subsequent flow, thus facilitating the process by reducing operation time and cost. The products identified as 'worst case' were LRs PUL-TEC and MIBI-TEC. (author). (author)

FALCAO - a relational database to storaging the variables monitored in the research reactor IEA-R1

International Nuclear Information System (INIS)

Gomes Neto, Jose; Andrade, Delvonei Alves de

2007-01-01

The objective of this work is to introduce all initial steps for the creation of a relational database, named FALCAO, to support the storaging of the monitored variables in the IEA-R1 research reactor, located in the Instituto de Pesquisas Energeticas e Nucleares, IPEN-CNEN/SP. As introduction, it is considered the modeling importance of the logic diagram and its direct influence in the integrity of the provided information. It is presented the concepts and steps of normalization and denormalization including the entities and relations involved in the logical model. It is also presented the effects of the model rules in the acquisition, loading and availability of the final information, under the performance concept, since the acquisition process, loads and provides lots of information in small intervals of time. The data logical model, considering the desired performance and the sharing information is also presented. (author)

Proceedings of the XXXI International Meeting on Fundamental Physics. B-Physics, Astroparticle Physics and Neutrino Physics. Soto de Cangas, Asturias, spain, 24-28 February, 2003

International Nuclear Information System (INIS)

2004-01-01

The XXXIth International Meeting on Fundamental Physics was held in La Pasera Resort at soto de Cangas (Asturias, Spain) from February 24-28, 2003. The meeting was devoted to experimental and theoretical issues of high energy physics, with special reference to beauty physics, astroparticle and neutrino physics. The major topics, as well as some special talks on Fundamental Physics at Low Energy Experiments and computing for the new era of High Energy Physics Experiments, were developed in a series of course lectures. Short contributions concerning the state of the art in those topics, as well as the last LEP results, and medical applications of the high energy detector developments, were also given. The meeting was sponsored by the Ministerio de Ciencia y Tecnologia, the Consejo Superior de Investigaciones Cientificas, the Universidades de Cantabria y Oviedo, the Principado de Asturias and the Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas. (Author)

Using a tandem ionization chamber for quality control of X-ray beams

International Nuclear Information System (INIS)

Yoshizumi, Maira T.; Caldas, Linda V.E.

2011-01-01

X-ray beam qualities are defined by both the mean energies and by the half-value layers (HVL). Many international protocols use the half-value layer and the beam voltage to characterize the X-ray beam quality. A quality control program for X-ray equipment includes the constancy check of beam qualities, i.e., the periodical verification of the half-value layer, which can be a time consumable procedure. A tandem ionization chamber, developed at Instituto de Pesquisas Energeticas e Nucleares, was used to determine the HVL and its constancy for five radiotherapy standard beam qualities. This ionization chamber is composed by two sensitive volumes with inner electrodes made of different materials: aluminum and graphite. The beam quality constancy check test was performed during two months and the maximum variation obtained was 1.24% for the radiation beam quality T-10. This result is very satisfactory according to national recommendations. (author)

Study of thermal decomposition and characterization of uranium compounds by thermogravimetry and differential calorimetry

Energy Technology Data Exchange (ETDEWEB)

Dantas, J M; Abrao, A [Instituto de Pesquisas Energeticas e Nucleares, Sao Paulo (Brazil). Centro de Engenharia Quimica

1980-01-01

The thermal behaviour of different types of ammonium diuranates, produced in the pilot plants of Instituto de Pesquisas Energeticas e Nucleares (Sao Paulo, Brazil), is studied. It was observed that: the contents of absorption and crystallization waters, as well as the content of absorption ammonia vary as a function of drying conditions; the contents of occluded ammonium nitrate vary according to the washing step; ammonia contents vary as a function of pH and of the original solution - greater ammonia concentrations are observed when diuranates are precipitate in uranyl nitrate solutions at higher pH's (9.0). Thermal instability of the intermediate compound varies as a function of the type of the occluded ion, NO/sup -//sub 3/ or SO sup(=)/sub 4/. The thermoanalytical curves show that the diuranates obtained by continuous precipitation have a more reproducible chemical composition than those obtained by batch precipitation.

Determination of the worst case for cleaning validation of equipment used in the radiopharmaceutical production of lyophilized reagents for 99mTc labelling

International Nuclear Information System (INIS)

Porto, Luciana Valeria Ferrari Machado; Fukumori, Neuza Taeko Okasaki; Matsuda, Margareth Mie Nakamura

2016-01-01

Cleaning validation, a requirement of the current Good Manufacturing Practices (cGMP) for Drugs, consists of documented evidence that cleaning procedures are capable of removing residues to predetermined acceptance levels. This report describes a strategy for the selection of the worst case product for the production of lyophilized reagents (LRs) for labeling with 99m Tc from the Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/Sao Paulo). The strategy is based on the calculation of a 'worst case index' that incorporates information about drug solubility, cleaning difficulty, and occupancy rate in the production line. It allowed a reduction in the required number of validations considering the possible manufacturing flow of a given product and the subsequent flow, thus facilitating the process by reducing operation time and cost. The products identified as 'worst case' were LRs PUL-TEC and MIBI-TEC. (author). (author)

IPEN Scientific and technical publications 1956-1981

International Nuclear Information System (INIS)

1983-01-01

The Instituto de Pesquisas Energeticas e Nucleares - IPEN (Energy Research Institute) from Sao Paulo, Brazil, was founded in 1956. Since its foundation, the main objectives of IPEN has been to undertake research and development into the peaceful uses of nuclear energy and to train scientific personnel to post-graduate level. The IPEN Scientific and Technical Publication - IPEN/SP, is a system developed at IPEN. Its purpose has been to generate a data base identifying the technical and scientific literature produced by IPEN staff members, published either in the Institute's series or in others brazilian and foreign publications. Documents cited in this jubilee edition include those in which IPEN staff members were authors or co-authors; document published by foreign research visitors while working at IPEN facilities; theses prepared by IPEN staff and reports in which IPEN is a corporate author. The IPEN technical publications reflect the main fields of research persuaded by the Institute, namely nuclear physics radiochemistry, chemical engineering, nuclear metallurgy and engineering and finally medical and industrial applications of radioisotopes. This present volume, published under the new title of IPEN - Scientific and Technical Publications, is a cumulative edition, to celebrate the 25th. anniversary of IPEN. In this jubilee edition, 1345 document published by IPEN staff are cited, following the main subject heading of INIS Subject Categories. (author)

Development of an object-oriented software based on fuzzy-logic for controlling temperatures in PAC experiments

Energy Technology Data Exchange (ETDEWEB)

Lapolli, Andre L.; Yamagishi, Sueli; Domienikan, Claudio; Schoueri, Roberto M.; Carbonari, Artur W.; Saxena, Rajendra N., E-mail: alapolli@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2009-07-01

The Hyperfine Interaction Laboratory at Instituto de Pesquisas Energeticas e Nucleares (IPEN) has been using Perturbed Angular Correlation (PAC) technique for studying material science for more than 20 years. One of the important aspects of the research involves the study of the behavior of measured properties of samples as a function of temperature. For temperatures higher than room temperature a small resistance furnace is used to heat the sample. The need to carry out the PAC measurement at predefined temperatures steps in a programmed manner is obvious. The present work describes a procedure for the furnace temperature control and automatic data acquisition at different temperatures based on fuzzy logic. The procedure consists in determining the linguistic input (temp, DELTAtemp) and output (pow) variables and their pertinence functions. After defining the variables, an object.oriented program is written in Java language which is an interface between principal data acquisition program and electronic temperature controller of the mini furnace. In addition to the implementation of the class that involves the fuzzy logic and classes with strategic algorithms defined for each temperature range there are classes of communication between systems based on modbus protocol RTU (Remote Terminal Unit) connected to serial interface RS-488. In this manner the applied technology for the development of software permits higher software life requiring only small alterations or implementation of classes in the use with new equipment. (author)

Energy planning on local scale. Remarks on Livorno city experience; La pianificazione energetica su scala locale. Riflessioni sull`esperienza della citta` di Livorno

Energy Technology Data Exchange (ETDEWEB)

Butta, Renato [Comune di Livorno (Italy). Dipt. Ambiente

1996-12-31

The area of Municipality of Livorno is classified, by European Union Structural Funds, as an Objective 2. As all the Italian cities over 50,000 inhabitants, Livorno is requested by the national law n. 10/91, to adopt an Energy Plan and to integrate in with the local use Plan. The main tasks of the Energy Plan of Livorno are: I. Reduce or mitigate the industrial decline in the city, developing coordinated strategies in the field of production energy efficiency; II. Define guide-lines and energy indicators for the Land use Plan, focused on the residential sector. The main priorities are: reduce the environmental impact of non renewable energy sources; reduce the energy local economic costs due to energy importation; improve the economic convenience of saving projects, reducing the use of sunk capital; integrate the energy aspects in the usual administrative procedures; carry out an Information System supporting the decisional process for public and private actors. The projects planned in the scenarios are: cogeneration plant, biogas utilisation from waste landfills, gas network pressure jamp, renewable energies in public building stock, energy saving in residential building, district heating system connected with the repowered thermoelectric power plant.

Optimization of the purification process of wine lees through anaerobic filter reactors. Optimizacion del proceso de depuracion de vinazas de vino mediante reactores tipo filtro anaerobio

Energy Technology Data Exchange (ETDEWEB)

Nebot Sanz, E.; Romero Garcia, L.I.; Quiroga Alonso, J.M.; Sales Marquez, D. (Departamento de Ingenieria Quimica, Universidad de Cadiz, Cadiz (Spain))

1994-01-01

In this work, the optimization of thermophilic anaerobic process, using Anaerobic Filter technology was studied. Feed of the Anaerobic Filter was wine-distillery wastewaters. The experiments developed were carried out at lab-scale downflow anaerobic filter reactors. Reactors were filled with a high porous plastic media (Flocor-R). The media support entities have a high surface/volume ratio. Test were run to determine the maximum organic load attainable in the system for wich both, the depurative efficiency and the methane production were optimum. Likewise, the effect of organic load on the anaerobic filter performance were studied. (Author) 15 refs. (Author)

Optimization of distribution networks with multiple power through the application of genetic algorithms; Optimizacion de redes de distribucion con multiples alimentaciones a traves de la aplicacion de algoritmos geneticos

Energy Technology Data Exchange (ETDEWEB)

Anaut, D.; Mauro, G. di; Suarez, J.A.; Dimenna, C.; Aguero, C. [Universidad Nacional de Mar del Plata (Argentina)

2009-07-01

Inside the aspects to be improved in the service of power distribution, reducing Joule losses (technical losses) is vital. This paper proposes a method of reconfiguration of primary distribution networks for minimal losses through the use of genetic algorithms. The same is applied to a multi-node system with feeders, tending to minimize these losses and maintain the voltage in line with current legislation. As a result of the implementation of this system, we found that the optimization method used is able to find the best solution (the optimal solution) among all possible combinations where the switch operations. Also, check your flexibility to adapt to the restrictions of radiality and voltage level, in less time than that required for an exhaustive search.

Methodology for the location diagnosis of electrical faults in electric power systems; Metodologia para el diagnostico de ubicacion de fallas en sistema electricos de potencia

Energy Technology Data Exchange (ETDEWEB)

Rosas Molina, Ricardo

2008-08-15

The constant growth of the Electric Power Systems derived from the increase in the world-wide demand of energy, has brought as a consequence a greater complexity in the operation and control of the power nets. One of the most affected tasks by this situation is the operation of electrical systems against the presence of faults, where the first task to realize is, on the part of the operational personnel of the network, the rapid fault site location within the system. In the present paper the problem of the diagnose location of electrical faults in power systems is approached, from the point of view of the operators of the energy control centers of an electric company. The objective of this thesis work is to describe a methodology of operational analysis of protections, as a bases for the development of a system of diagnosis systems for faults location, that allows to consider the possible fault sites within the system as well as a justification of the operation of protections in face of a disturbance as a support to the operators of the Energy Control centers. The methodology is designed to use different information types, discreet, continuous and controls. Nevertheless, in the development of the present stage of the proposed methodology use is made exclusively of the discreet information of the conditions of breakers and operation of relays, as well as of the connectivity of the network elements. The analysis methodology consists in determining the network elements where the fault could have occurred, using the protections coverage areas associated to the operated circuit breakers. Later, these fault alternatives become ordained in descendent form of possibility using classification indexes and analyses based on fuzzy logic. [Spanish] El constante crecimiento de los Sistemas Electricos de Potencia derivado del incremento en la demanda energetica mundial, ha traido como consecuencia una mayor complejidad en la operacion y control de las redes electricas. Una de las

Electricity to natural gas competition under customer-side technological change: a marginal cost pricing analysis; Cambiamento tecnologico a valle del contatore e concorrenza fra elettricita' e gas naturale

Energy Technology Data Exchange (ETDEWEB)

Gulli' , Francesco [Bocconi Univ., Milan (Italy). Iefe

2004-07-01

This paper aims at evaluating the impact of technological change (on the customer side of the meter) on the network energy industry (electricity and natural gas). The performances of the small gas fired power technologies and the electrical reversible heat pumps have improved remarkably over the last ten years, making possible (or more viable) two opposite technological trajectories: the fully gas-based system, based on the use of small CHP (combined heat and power generation) plants, which would involve a wide decentralisation of energy supply; the fully electric-based system, based on the use of reversible electric heat pumps, which would imply increasing centralisation of energy supply. The analysis described in this paper attempts to evaluate how these two kinds of technological solutions can impact on inter-service competition when input prices are ste equals to marginal costs of supply in each stage of the electricity and natural gas industries. For this purpose, unbundled prices over time and over space are simulated. In particular the paper shows that unbundling prices over space in not very important in affecting electricity to natural gas competition and that, when prices are set equal to long-run marginal costs, the fully electric-based solution (the reversible heat pump) is by far preferable to the fully gas-based solution (the CHP gas fired small power plant). In consequence, the first best outcome of the technological change would involve increasing large power generation and imported (from the utility grid) electricity consumption. Given this framework, we have to ask ourselves why operators, regulators and legislators are so optimistic about the development of the fully gas-based solutions. In this respect, the paper suggests that market distortions (such as market power, energy taxation and inefficient pricing regulation) might have give an ambiguous representation of the optimal technological trajectory, inducing to overestimate the social value

Optimization in brachytherapy with the implementation of Radiobiology; Optimizacion en Braquiterapia con la implementacion de la Radiobiologia

Energy Technology Data Exchange (ETDEWEB)

Duran, M.P.; Bourel, V.J.; Rodriguez, I.; Torre, M. de la; Caneva, S. [Braqui S.R.L. Viamonte 1861, Buenos Aires (Argentina)

1998-12-31

In the brachytherapy planning treatments with High dose rates (HDR), the optimization algorithms used are based in dosimetric considerations and/or geometric ones, ignoring the radiobiological response of the tissue treated. In this work we wish to show the implementation of radiobiological concepts in the optimization. Assuming that the subtiles differences that result in the dose distribution among the different optimization models which are not visible in an isodose plane, it is studied how is classically make it , the quality implant through natural histograms about dose volumes and the resulting parameters. Also is studied the necrosis probability which may be caused by the choice of some optimization model, allowing with this the choice of the best implant. (Author)

The sterility of equilibrium economics: an aspect of sociology of science La esterilidad de la economía del equilibrio: un aspecto de la sociología de la ciencia

Directory of Open Access Journals (Sweden)

Bhatt V. V.

2000-06-01

Full Text Available This paper shows that economic science is yet to reach maturity and that equilibrium theory does not grasp actual economic relationships,and is sterile for policy making. It analyses the creation of castsamong economists, the impossibility of formalizing all economic phenomena in terms of individual optimization, and the ideological biases of scientific work. It suggests the need to reassess the basic hypothesis of the general equilibrium approach and to rebuild the analytical framework of economics. Based upon Krishnamurti "ephilosophy, it shows that the main thrust of human behavior is notselfishness but envy, and that this motivation weakens the traditional theory of individual and firm behavior.Este articulo muestra que la ciencia economica no ha alñcanzado la madurez que la la teoria del equilibrio no capta las relaciones economicas reales y es esteril para formular politicas ecopnomicas. Analiza la formacion de castas entre los economistas, la imposibilidad de formalizar todos los fenomenso economicos en terminos de optimizacion individual y los sesgos ideologicos del trabajo cientifico. Indica la necesidad de replantear las hipotesis basicas del enfoque del equilibrio general y de reconstruir el aparato analitico de la economia. Con base en la filosofia de Krishnamurti, muestra que la fuerza motriz de la conducta humana es la envidia y no el egoismo , y que esta motivacion resta validez a la teoria tradicional del comportamiento de los individuos y de las empresas.

MULTIOBJECTIVE EVOLUTIONARY ALGORITHMS APPLIED TO MICROSTRIP ANTENNAS DESIGN ALGORITMOS EVOLUTIVOS MULTIOBJETIVO APLICADOS A LOS PROYECTOS DE ANTENAS MICROSTRIP

Directory of Open Access Journals (Sweden)

Juliano Rodrigues Brianeze

2009-12-01

Full Text Available This work presents three of the main evolutionary algorithms: Genetic Algorithm, Evolution Strategy and Evolutionary Programming, applied to microstrip antennas design. Efficiency tests were performed, considering the analysis of key physical and geometrical parameters, evolution type, numerical random generators effects, evolution operators and selection criteria. These algorithms were validated through design of microstrip antennas based on the Resonant Cavity Method, and allow multiobjective optimizations, considering bandwidth, standing wave ratio and relative material permittivity. The optimal results obtained with these optimization processes, were confirmed by CST Microwave Studio commercial package.Este trabajo presenta tres de los principales algoritmos evolutivos: Algoritmo Genético, Estrategia Evolutiva y Programación Evolutiva, aplicados al diseño de antenas de microlíneas (microstrip. Se realizaron pruebas de eficiencia de los algoritmos, considerando el análisis de los parámetros físicos y geométricos, tipo de evolución, efecto de generación de números aleatorios, operadores evolutivos y los criterios de selección. Estos algoritmos fueron validados a través del diseño de antenas de microlíneas basado en el Método de Cavidades Resonantes y permiten optimizaciones multiobjetivo, considerando ancho de banda, razón de onda estacionaria y permitividad relativa del dieléctrico. Los resultados óptimos obtenidos fueron confirmados a través del software comercial CST Microwave Studio.

Development and application of multidimensional model for the quality evaluation of graduate-level education in program of the IPEN

International Nuclear Information System (INIS)

Mioranza, Claudio

2009-01-01

Educational institutions have been highly concerned about the quality of products offered to the society, in order to obtain better results they need to provide a high degree quality service. The exclusive approach of this study was the development of a Multidimensional Model for the Educational Quality Assessment, named MULTQUALED. The model was based on quality standards and models used in other economic sectors where were created four data collection instruments, comprehending dimensions such as pedagogical, human resources and facilities regarding qualified and quantified actions for the continuous improvement of educational quality management process. The study was applied to the Nuclear Technology Stricto Sensu Graduate Program from the Instituto de Pesquisas Energeticas e Nucleares from Sao Paulo (IPEN-CNEN/SP). The information obtained from the application of MULTQUALED evidenced fragilities and positive aspects that support the decision process with strategic actions contributing with the continuous improvement of the program education quality. (author)

Self-organizing maps applied to two-phase flow on natural circulation loop studies

Energy Technology Data Exchange (ETDEWEB)

Castro, Leonardo F.; Cunha, Kelly de P.; Andrade, Delvonei A.; Sabundjian, Gaiane; Torres, Walmir M.; Macedo, Luiz A.; Rocha, Marcelo da S.; Masotti, Paulo H.F.; Mesquita, Roberto N. de, E-mail: rnavarro@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2015-07-01

Two-phase flow of liquid and gas is found in many closed circuits using natural circulation for cooling purposes. Natural circulation phenomenon is important on recent nuclear power plant projects for heat removal on 'loss of pump power' or 'plant shutdown' accidents. The accuracy of heat transfer estimation has been improved based on models that require precise prediction of pattern transitions of flow. Self-Organizing Maps are trained to digital images acquired on natural circulation flow instabilities. This technique will allow the selection of the more important characteristics associated with each flow pattern, enabling a better comprehension of each observed instability. This periodic flow oscillation behavior can be observed thoroughly in this facility due its glass-made tubes transparency. The Natural Circulation Facility (Circuito de Circulacao Natural - CCN) installed at Instituto de Pesquisas Energeticas e Nucleares, IPEN/CNEN, is an experimental circuit designed to provide thermal hydraulic data related to one and two phase flow under natural circulation conditions. (author)

History of the future; Historia del futuro

Energy Technology Data Exchange (ETDEWEB)

Manzini, Fabio [Centro de Investigacion en Energia (CIE) de la UNAM, Temixco, Morelos (Mexico)

2010-07-01

The desired future is to imagine a world energized by energy sources that do not infringe against our environmental heritage, because the environment is the determining factor in the equation of human sustainability: without environment there is neither society nor economy. In this document are mentioned the energy reserves in Mexico of uranium as a fuel for the Laguna Verde nuclear power plant, Veracruz; coal, oil and natural gas. It also mentions the renewable resources and existing energy scenarios in Mexico. [Spanish] El futuro deseado es imaginarnos un mundo energizado por fuentes de energia que no atenten en contra de nuestro patrimonio ambiental, porque el ambiente es el factor determinante en la ecuacion de la sustentabilidad humana; sin ambiente no existe ni sociedad ni economia. En este documento se mencionan las reservas energeticas en Mexico de uranio como combustible para la central nuclear Laguna Verde, Veracruz; de carbon, de petroleo y gas natural. Se mencionan tambien los recursos renovables existentes y los escenarios energeticos en Mexico.

Energy conservation in ice manufacturing; Ahorro de energia en la fabricacion de hielo

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

This paper shows the results of the energy diagnosis study for ice manufacturing industries. The identified opportunities for conservation and efficient use of energy have allowed the reduction of the electric bill, modernizing at the same time, its installations and addressing inherent aspects of the use of energy producing items; in which the estimated investments are recovered in its major part in a period of a year, the goodness of the investments propitiate the growth and competitiveness required in these days. [Espanol] En este documento se exponen los resultados del estudio del diagnostico energetico para industrias productoras de hielo. Las oportunidades de ahorro y uso eficiente de energia identificadas, han permitido reducir la facturacion energetica, a la par de modernizar sus instalaciones y atender aspectos inherentes al uso de energeticos; en lo cual las inversiones estimadas se recuperan en su mayoria en un ano, las bondades de las inversiones propician un crecimiento y competitividad requerida en estos dias.

Energy Savers: Tips for Saving Energy and Money at Home

International Nuclear Information System (INIS)

Jones, J.

2000-01-01

The Department of Energy of the United States of America works to guarantee provisions of safe energy, reliable and economically accessible to support to one developing economy and to protect the atmosphere. These suggestions and ideas to increase the energy efficiency in their house represent simple ways in which our citizens can contribute to preserve the atmosphere at world-wide level, to reduce the level of contamination of the air and to reserve our natural resources for future generations.[Spanish] El Departamento de Energa de los Estados Unidos de America trabaja para garantizar suministros de energa seguros, confiables y econmicamente accesibles para apoyar a una economa en desarrollo y proteger el medio ambiente. Estas sugerencias e ideas para aumentar la eficiencia energetica en su casa representan maneras sencillas en que nuestros ciudadanos pueden contribuir a preservar el medio ambiente a nivel mundial, a reducir el nivel de contaminacin del aire y a reservar nuestros recursos naturales para las generaciones futuras

L’ambientalista nucleare Alternative al cambiamento climatico

CERN Document Server

Gómez Cadenas, Juan José

2012-01-01

Che cosa emette più radioattività nell'atmosfera: una centrale nucleare o una centrale termica? Una centrale termica. Che cosa comporta maggior rischio: vivere nei pressi di una centrale nucleare o fumare una sigaretta? Fumare una sola sigaretta equivale al rischio di vivere due anni vicino a una centrale nucleare. Che cosa si fa in un'ora di punta di richiesta energetica se non soffia il vento? Si ricorre a impianti di pompaggio o centrali a gas di riserva. L'energia elettrica non può essere immagazzinata. Quanti aerogeneratori servono per sostituire una centrale nucleare? Circa duemila, dell'ultima generazione. Separati tra di loro dei cinquecento metri necessari perché siano efficienti, la fila dei mulini si estenderebbe da Barcellona a Ginevra, attraversando l'intera Francia. È un errore contrapporre tra loro le energie alternative, sarebbe molto più sensato considerarle alleate nella grande battaglia contro un Signore Oscuro ogni giorno più potente: il cambiamento climatico, che potrebbe benissimo...

Utilization of sites of final disposition of municipal wastes for electrical power generation; Aprovechamiento de sitios de disposicion final de residuos municipales para generacion de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Lopez Sanchez, Felipe; Sarmiento Bleicher, Conrado [Departamento del Distrito Federal (Mexico)

1996-07-01

Mexico confronts very comprehensive environmental problems, and the solid wastes and their control are not the minor of the preoccupations on the matter. The present work tries to demonstrate the usefulness or the economic advantages and the use of a sanitary land fill as a power source, outlining the necessity and convenience of planning and of designing the future sanitary land fills, specially those of the important urban centers, thinking of its usefulness beyond a confinement of the materials that lack use or commercial value. [Spanish] Mexico afronta una problematica ambiental muy amplia, y los residuos solidos y su control no son la menor de las preocupaciones al respecto. El presente trabajo trata de demostrar la utilidad o rentabilidad del aprovechamiento de un relleno sanitario como fuente energetica, perfilando la necesidad y conveniencia de planear y disenar los futuros rellenos sanitarios, especialmente los de los centros urbanos importantes, pensando en su utilidad mas alla de un confinamiento de los materiales que carecen de uso o valor comercial.

Biological response of Tradescantia stamen-hairs in Brazilian radioactive waste deposits

International Nuclear Information System (INIS)

Gomes, Heliana A.; Macacini, Jose Flavio

2005-01-01

The objective of the present study was to apply a highly sensitive botanical test of mutagenicity (the Tradescantia stamen-hair mutation bioassay), to assess in situ the biological responses induced by occurring radiation in Brazilian radioactive waste deposits (waste deposits from the Mineral Treatment Unit/Brazilian Nuclear Industries (UTM/INB), from the Centro de Desenvolvimento de Tecnologia Nuclear (CDTN) and from the Instituto de Pesquisas Energeticas e Nucleares (IPEN). The mutagenesis was evaluated in environments presenting gamma radiation exposure rates ranging from 1.6 μR.min -1 up to 3300.0 μR.min -1 . It was detected a significant increase in the mutation rate for pink Tradescantia stamen-hair only for the local presenting the highest exposition rate within UTM/INB which had a radiation exposition rate of 750 μR.min -1 . The Tradescantia plants exposed to the radioactive waste deposits from CDTN and IPEN presented an insufficient number of flowers for the statistical evaluation of mutagenicity. (author)

ISOMERIZACIÓN DEL 1-CICLOHEXILOCTANO EN ZEOLITAS H-ZSM-22 Y H-Y

Directory of Open Access Journals (Sweden)

Jorge Quintero

2009-06-01

Full Text Available En este trabajo presentamos los resultados de la evaluacion energetica de los intermediarios de la isomerización del 1-ciclohexiloctano en dos etapas. La primera etapa corresponde a la isomerización del 1-ciclohexiloctano en fase gaseosa vía carbocationes clásicos, usando el nivel de teoría DFT/B3LYP y conjunto de funciones base 6-31G.  En la segunda etapa se desarrolló la coordenada de reacción de la isomerización del 1-ciclohexiloctano en presencia de zeolitas ácidas H-ZSM-22 y H-Y empleando el método ONIOM, usando los niveles de teoría B3LYP/6-31G:UFF. Nuestros resultados muestran diferencias significativas entre las reacciones en fase gaseosa y condensada. Estas diferencias ponen de manifiesto la influencia del confinamiento cuántico que sufren las moléculas al interior de los sistemas microporosos del tipo zeolitas.

Energy conservation in ice manufacturing; Ahorro de energia en la fabricacion de hielo

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-12-31

This paper shows the results of the energy diagnosis study for ice manufacturing industries. The identified opportunities for conservation and efficient use of energy have allowed the reduction of the electric bill, modernizing at the same time, its installations and addressing inherent aspects of the use of energy producing items; in which the estimated investments are recovered in its major part in a period of a year, the goodness of the investments propitiate the growth and competitiveness required in these days. [Espanol] En este documento se exponen los resultados del estudio del diagnostico energetico para industrias productoras de hielo. Las oportunidades de ahorro y uso eficiente de energia identificadas, han permitido reducir la facturacion energetica, a la par de modernizar sus instalaciones y atender aspectos inherentes al uso de energeticos; en lo cual las inversiones estimadas se recuperan en su mayoria en un ano, las bondades de las inversiones propician un crecimiento y competitividad requerida en estos dias.

Analysis of energy culture the Crambe (Crambe abyssinica Hochst) produced in no tillage; Analise energetica da cultura do Crambe (Crambe abyssinica Hochst) produzida em plantio direto

Energy Technology Data Exchange (ETDEWEB)

Jasper, Samir Paulo; Biaggioni, Marco Antonio Martin; Silva, Paulo Roberto Arbex; Seki, Andre Satoshi; Bueno, Osmar Carvalho de [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas], E-mail: jasper@fca.unesp.br

2010-07-01

The objective of this study was to characterize the energy consumption in the deployment and conduct of the culture of Crambe abyssinica Hochst in no-tillage, at the Experimental Farm Farm belonging to the Faculty of Agronomic Sciences - UNESP, located in Botucatu - SP. Assessing the sustainability of the system were estimated, energy efficiency and culture of crambe. To survey the components of the structure of expenditures, we used coefficients Energetic in specialized literature. The structures of energy expenditure by type, source and form, demonstrated that the indirect energy participated with 65.03%, industrial sources, fossil and biological accounted for 68.80%, 23.67% and 11.30%, respectively. The forms have been introduced; chemical fertilizers contributed 44.31% and diesel to 23.04% to 67.35% of energy expenditure, showing the dependence of the system of energy sources and industrial fuels. The efficiency of the culture was found to be 9.98, indicating that for each calorie used in the production of crambe return was 8.98 units, the efficiency was above 38, demonstrating the high sustainability of the agricultural system to reach energy cultural exceeding 37 thousand MJ ha{sup -1}. (author)

Operation and maintenance of the RA Reactor in 1985, Part 1, Annex B - Report of the Technology Service; Deo 1 - Pogon i odrzavanje nuklearnog reaktora RA u 1985. godini - Prilog B - Izvestaj o radu tehnoloske sluzbe

Energy Technology Data Exchange (ETDEWEB)

Martinc, R; Vukadin, Z; Stosic, O; Cupac, S [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

1985-12-01

Technology service is established according to the need of unified technology control of the reactor, based on the organizational structure developed in USA, a part of which was applied at the Krsko NPP. Tasks of this service are: regular control and recording of operating reactor parameters under steady state and accidental conditions; control of chemical state of the reactor core (control of Ph values and electro conductivity of the heavy water and technical water); dosimetry parameters control and recording; safety and optimisation analyses when planning reactor core modifications; (changing the type of fuel, design of new components); cooperation with the reactor users during isotope production, activation analyses, application of neutron beams; participating in research programs; planning refueling. The most important task performed by this service was conversion of the core from 2% to 80% enriched fuel elements. A methodology for optimizing the reactor application was developed. Operation of the heavy water purification system, heavy water parameters, and operation of the gas system were controlled. Radiation and contamination levels in the working environment were measured, individual and collective doses. [Serbo-Croat] Tehnoloska sluzba uspostavljena je u skladu sa ispoljenim potrebama jedinstvene tehnoloske kontrole reaktora, oslanjajajucui se na organizacionu semu koja je razvijena u SAD, a cija je jedna varijanta primenjena na NE Krsko. Zadaci sluzbe su obavljanje sledecih zadataka: redovna kontrola i evidencija radnih parametara reaktora u redovnim i akcidentalnim uslovima; kontrola hemijskog rezima u reaktoru (kontrola PH vrednosti i elektroprovodnosti teske i tehnicke vode); kontrola i evidencija tehnicke dozimetrije; sigurnosne i optimizacione analize prilikom planiranja izmena na reaktoru (promene vrste goriva, izgradnja novih elemenata opreme); saradnja sa korisnicima reaktora prilikom prozivodnje izotopa, aktivacione analize, koriscenja

Utilization of the computational technic for the promotion and diffusion of the energy conservation practice; Utilizacion de tecnicas computacionales para promocionar y difundir el ahorro de energia

Energy Technology Data Exchange (ETDEWEB)

Kemper Valverde, N. [Laboratorio de Inteligencia Artificial, Instituto de Ingenieria, UNAM, Mexico D. F. (Mexico)

1995-12-31

In this paper are presented the developments obtained through the application of the new computational technologies in the diffusion and promotion tasks of energy efficient use and conservation. The most relevant aspects are described of three multimedia courses that were designed in order to increase the possibilities of offering personal training in efficient energy technic, as well as to have on hand totally open consulting and interactive tools. The courses that are described are: ``Design of Energy Conservation Programs for the Industry``, ``Energy Conservation in Combustion Equipment`` and ``Energy Cogeneration Technologies.`` On another subject, an analysis is also made of the possibilities for the development and application of expert systems that advise and give support to the work of technicians and engineers dedicated to energy conservation. The main characteristics of an expert system to give support to the energy analysis of lighting industrial systems, malls, buildings and hotels are also described. [Espanol] En este trabajo se presentan los desarrollos obtenidos por la aplicacion de las tareas de difusion y promocion del uso eficiente y ahorro de energia. Se describen los aspectos mas relevantes de tres cursos multimedia que fueron disenados con el objeto de incrementar las posibilidades de brindar capacitacion individualizada en tecnicas energeticas eficientes, asi como de contar con herramientas de consulta totalmente abiertas e interactivas. Los cursos que se describen son: ``Diseno de Programas de Ahorro de Energia en la Industria,`` ``Ahorro de Energia en Equipos de Combustion`` y ``Tecnologias de Cogeneracion de Energia.`` Por otro lado, tambien se hace un analisis de las posibilidades para el desarrollo y aplicacion de sistemas expertos que asesoren y apoyen el trabajo de tecnicos e ingenieros dedicados al ahorro de energia. Se describen las caracteristicas principales de un sistema experto disenado para brindar apoyo en analisis energeticos

Utilization of the computational technic for the promotion and diffusion of the energy conservation practice; Utilizacion de tecnicas computacionales para promocionar y difundir el ahorro de energia

Energy Technology Data Exchange (ETDEWEB)

Kemper Valverde, N [Laboratorio de Inteligencia Artificial, Instituto de Ingenieria, UNAM, Mexico D. F. (Mexico)

1996-12-31

In this paper are presented the developments obtained through the application of the new computational technologies in the diffusion and promotion tasks of energy efficient use and conservation. The most relevant aspects are described of three multimedia courses that were designed in order to increase the possibilities of offering personal training in efficient energy technic, as well as to have on hand totally open consulting and interactive tools. The courses that are described are: ``Design of Energy Conservation Programs for the Industry``, ``Energy Conservation in Combustion Equipment`` and ``Energy Cogeneration Technologies.`` On another subject, an analysis is also made of the possibilities for the development and application of expert systems that advise and give support to the work of technicians and engineers dedicated to energy conservation. The main characteristics of an expert system to give support to the energy analysis of lighting industrial systems, malls, buildings and hotels are also described. [Espanol] En este trabajo se presentan los desarrollos obtenidos por la aplicacion de las tareas de difusion y promocion del uso eficiente y ahorro de energia. Se describen los aspectos mas relevantes de tres cursos multimedia que fueron disenados con el objeto de incrementar las posibilidades de brindar capacitacion individualizada en tecnicas energeticas eficientes, asi como de contar con herramientas de consulta totalmente abiertas e interactivas. Los cursos que se describen son: ``Diseno de Programas de Ahorro de Energia en la Industria,`` ``Ahorro de Energia en Equipos de Combustion`` y ``Tecnologias de Cogeneracion de Energia.`` Por otro lado, tambien se hace un analisis de las posibilidades para el desarrollo y aplicacion de sistemas expertos que asesoren y apoyen el trabajo de tecnicos e ingenieros dedicados al ahorro de energia. Se describen las caracteristicas principales de un sistema experto disenado para brindar apoyo en analisis energeticos

Development of a methodology for the evaluation of energy efficiency of central irrigation pivots; Desenvolvimento de uma metodologia para a avaliacao da eficiencia energetica de pivos centrais de irrigacao

Energy Technology Data Exchange (ETDEWEB)

Lima, Aureo Cezar de [Centro Federal de Educacao Tecnologica de Petrolina (CEFET-Pet), PE (Brazil); Guimaraes Junior, Sebastiao Camargo; Camacho, Jose Roberto; Salerno, Carlos Henrique [Universidade Federal de Uberlandia (NERFAE/UFU), MG (Brazil). Fac. de Engenharia Eletrica. Nucleo de Eletricidade Rural e Fontes Alternativas de Energia

2006-07-01

It will be presented in this work a methodology for the evaluation of the energy efficiency of irrigation center systems by central pivot. Integrating water efficiency application with the energy associated to the sprinklers, adduction pipeline, pivot arm and pump systems, the proposed indexes make possible to evaluate the energy income of each component of the irrigation system, contributing for the increase of the global efficiency of the irrigated agriculture. (author)

Computerized system for the support of the predictive maintenance in thermoelectric power stations of Comision Federal de Electricidad; Sistema computarizado para el apoyo del mantenimiento predictivo en centrales termoelectricas de la Comision Federal de Electricidad

Energy Technology Data Exchange (ETDEWEB)

Aranda A, Segio; Garcia M, Raul; Poujol G, Francisco; Chairez C, Carlos; Dominguez M, Nely [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2002-07-01

This paper describes the functionality of the Integral System of Information for the Diagnosis of Predictive Maintenance (SIIDMP) in the thermoelectric centrals, whose primary target is to give support to the personnel related with the maintenance and operation of the thermoelectric central to optimize the application of the inspection, maintenance and its associated costs. It is important to comment that in the generating power stations of Comision Federal de Electricidad (CFE) techniques and methodologies for the preventive and corrective maintenance are applied, in addition of which they count on electronic equipment of operation dedicated to the inspection and control of vibratory equipment. The architecture of the SIIDMP is of the client-server type and for its design and implantation Windows NT 4.0 was used as operating system, SQL Server 7.0 as server and manager of the database, Visual C++ for the programs of data mining, Vision Basic 6.0 for the codification of the application programs and Interface Man-Machine (IMM), the communication mechanism Open Data Base Connectivity (ODBC) to establish the connection with the different data sources, as well as libraries of symbols and graphs that were included in the interface of the user. The main objective of the SIIDMP is to take care of the own necessities on optimization, improvements and savings in the operation of the power stations. With systems like the SIIDMP, a reduction of the costs due to shutdowns by accidental failures of the main equipment is looked for, limiting the deterioration of the equipment, as well as to provide knowledge and aid to all the personnel who take part in the management of the operation and conservation of the facilities of the power station. [Spanish] Se describe la funcionalidad del Sistema Integral de Informacion para el Diagnostico de Mantenimiento Predictivo en las centrales termoelectricas (SIIDMP), cuyo objetivo principal es apoyar al personal relacionado con el

Renewable energies in the national power supply; Energias renovables en la oferta energetica nacional

Energy Technology Data Exchange (ETDEWEB)

Huacuz Villamar, Jorge M [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

Mexico is a country endowed with abundant power resources. By the magnitude of its reserves and the installed production capacity. This article presents the different nonconventional energy resources which Mexico has, with the purpose of using them for the generation of electric energy. [Spanish] Mexico es un pais dotado de abundantes recursos energeticos. Por la magnitud de sus reservas y por la capacidad instalada de produccion. Este articulo presenta los diferentes recursos energeticos no convencionales con los que cuenta Mexico, con el fin de utilizarlos para la generacion de energia electrica.

Coal: security of supply and energy diversity. Carbon: seguridad de abastecimiento y diversificacion energetica

Energy Technology Data Exchange (ETDEWEB)

Gonzalez-Irun Sanchez, G [Carboex, Madrid (Spain)

1991-08-01

Commences by reviewing the advantages of coal as a fuel source, namely: large availability of reserves; deposits located in every continent; life of reserves estimated to be hundreds of years. These three aspects make coal an extremely reliable energy source. 3 figs.

South American energy integration: new perspectives; Novas perspectivas para a integracao energetica sul-americana

Energy Technology Data Exchange (ETDEWEB)

Silva, Jose Malhaes da [Malhaes da Silva Consultoria Ltda., Rio de Janeiro, RJ (Brazil); Salomao, Luiz Alfredo [Universidade Candido Mendes, Rio de Janeiro, RJ (Brazil). Escola de Politicas Publicas e Governo

2008-07-01

This paper analyses the South American energy integration, the advantages related to this process as well as the existing obstacles . What is the scope in terms of projects and initiatives, and the role of political and institutional barriers to be overcome. (author)

Risk assessment in energy efficiency projects; Gerenciamento de riscos em projetos de eficiencia energetica

Energy Technology Data Exchange (ETDEWEB)

Aragao Neto, Raymundo Moniz de

2003-08-15

This paper aims to present processes related to risk management in energy efficiency projects, delivered in a performance contracting basis. Introductory comments will be presented about the considered project model, emphasizing the necessity of proper processes of risk management and evaluation and their treatment according methodology developed by PMI - Project Management Institute, grouped in its publication PMBOK - Project Management Body of Knowledge. A hypothetical project will be demonstrated, but similar to the Brazilian Body of Knowledge. A hypothetical project will be demonstrated, but similar to the Brazilian market reality, as a form of illustrating the considered methodology.

Policy of productive development and energy efficiency; Politica de desenvolvimento produtivo e eficiencia energetica

Energy Technology Data Exchange (ETDEWEB)

Naturesa, Jim Silva [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Civil Arquitetura e Urbanismo. Nucleo Interdisciplinar de Planejamento Energetico], e-mail: cam@fec.unicamp.br; Mariotoni, Carlos Alberto [Faculdade Politecnica de Jundiai (FPJ), SP (Brazil). Anhanguera Educacional

2008-07-01

The new industry policy in Brazil called PDP (Politica de Desenvolvimento Produtivo) and implications on Brazilian energy efficiency program are discussed. The PINTEC - Industrial Research for Technology Innovation (2003/05) indicates a low R and D and I investment of the Brazilian industries. It is expected that and energy efficiency project can be seen as an innovation project because this brings new equipment and a more advanced knowledge to industry, which helps to reduce electrical energy consumption, consumer' bills and production costs. (author)

Analytical evaluation and optimization of advanced oxidation process in a solar pilot power plant; Evaluacion analitica y optimizacion de procesos de oxidacion avanzada en planta piloto solar

Energy Technology Data Exchange (ETDEWEB)

Garcia Vazquez, J.; Malato Rodriguez, S.; Rodriguez Fernandez-Alba, A.

2003-07-01

The technical feasibility mechanisms and performance of degradation of several pesticides (imidacloprid, methomyl and diuron) dissolved in water have been studies at pilot scale in two well-defined photocatalytic systems of special interest because natural UV light can be used: heterogeneous photocatalysis with titanium dioxide and homogeneous photocatalysis by photo-Fenton.Equivalent pilot-scale (made up of Compound Parabolic Collectors (CPCs) specially designed for solar photocatalytic applications) and field conditions used for both systems and the three pesticides allowed adequate comparison of the degree of mineralization and toxicity achieved as well as the transformation products generated en route to mineralization. Total disappearance of the parent compounds and 90% mineralisation have been attained with all pesticides tested, methomyl being the most difficult to be degraded with both treatments. First order rate constants, initial rate,time necessary for mineralizing 90% of the initial TOC and hydrogen peroxide consumption were calculated in all cases, enabling comparison both of treatments and of the selected pesticide reactivity. Complete mineralisation of TOC is not achieved even after quite a long time (more than 300 minutes). Three different bioassays (Vibrio fischeri, Daphnia magna and a Microalga) have been used for testing the progress of toxicity during treatments. All remained toxic down to very low pesticide disappearance of the pesticide. Only if treatment is maintained throughout enough mineralisation (i. e. TOC disappearance), the toxicity is reduced to below the threshold (EC 50%). Transformation products evaluated by GC-MS/AED (after two SPE procedures), LC-IT-MS and LC-IC were the same in both phototreatments. The main differences between the two processes are in the amount of transformation products (TPs) generated, not in the TPs detected which were always the same. (Author)

Órtese dinâmica integrando manufatura aditiva e robótica cooperativa/Dynamic orders integrating additive manufacture and cooperative robotics

Directory of Open Access Journals (Sweden)

Valéria Meirelles Carril Elui

2017-09-01

Full Text Available A evolução da artrite reumatoide (AR leva a perda da capacidade se estender ativamente os dedos. Nos casos avançados uma órtese mecânica passiva pode não ser satisfatória. Este trabalho apresenta a integração com um sistema motor aumentando o alcance da órtese na funcionalidade de indivíduo. Foi desenvolvido um projeto conceito de órtese assistida por servo motor que após otimizações avaliadas em bancada e com portador da deformidade apresentou resultados promissores quanto ao controle do motor e opinião positiva quanto ao uso da mão. Abstract The evolution of rheumatoid arthritis (RA leads to loss of the ability to actively extend the fingers. In advanced cases the mechanical orthosis may not be satisfactory. This work presents the integration with a motor system increasing the reach of the orthosis in the individual functionality. It was developed a concept project of servo-assisted orthosis that after optimizations evaluated in the bench and with deformity bearer presented promising results regarding the motor control and positive opinion regarding the use of the hand.Keywords: Orthosis, 3D Printing, Rheumatoid Arthritis, Servo motor, Rehabilitation ResumenLa evolución de la artritis reumatoide (AR lleva a la pérdida de la capacidad de extender activamente los dedos. En los casos avanzados la órtesis mecánica puede no ser satisfactoria. Este trabajo presenta la integración con un sistema motor aumentando el alcance de la órtesis en la funcionalidad de individuo. Se desarrolló un proyecto concepto de órtesis asistida por servo motor que después de optimizaciones evaluadas en bancada y con portador de la deformidad presentó resultados prometedores en cuanto al control del motor y opinión positiva en cuanto al uso de la mano.Palabras clave: Órtesis, Impresión 3D, Artritis reumatoide, Servo motor, Rehabilitación.

Development of an object-oriented software based on fuzzy-logic for controlling temperatures in PAC experiments

International Nuclear Information System (INIS)

Lapolli, Andre L.; Yamagishi, Sueli; Domienikan, Claudio; Schoueri, Roberto M.; Carbonari, Artur W.; Saxena, Rajendra N.

2009-01-01

The Hyperfine Interaction Laboratory at Instituto de Pesquisas Energeticas e Nucleares (IPEN) has been using Perturbed Angular Correlation (PAC) technique for studying material science for more than 20 years. One of the important aspects of the research involves the study of the behavior of measured properties of samples as a function of temperature. For temperatures higher than room temperature a small resistance furnace is used to heat the sample. The need to carry out the PAC measurement at predefined temperatures steps in a programmed manner is obvious. The present work describes a procedure for the furnace temperature control and automatic data acquisition at different temperatures based on fuzzy logic. The procedure consists in determining the linguistic input (temp, Δtemp) and output (pow) variables and their pertinence functions. After defining the variables, an object.oriented program is written in Java language which is an interface between principal data acquisition program and electronic temperature controller of the mini furnace. In addition to the implementation of the class that involves the fuzzy logic and classes with strategic algorithms defined for each temperature range there are classes of communication between systems based on modbus protocol RTU (Remote Terminal Unit) connected to serial interface RS-488. In this manner the applied technology for the development of software permits higher software life requiring only small alterations or implementation of classes in the use with new equipment. (author)

Intelligent use of the energy; Uso inteligente de la energia

Energy Technology Data Exchange (ETDEWEB)

Dominguez Ahedo, Carlos [Director General de la Comision Nacional para el Ahorro de Energia (CONAE), Mexico D. F. (Mexico)

2005-07-01

Comision Nacional para el Ahorro de Energia (CONAE) is an administrative agency independent of the Secretaria de Energia that serves as a technical agency for consultancy in matters of efficient use of energy and advantageous use of renewable energies. This document searches to inform the population how to satisfy the necessity of energy in an intelligent way. For this purpose some useful actions to be performed were detected: the making of a balance between the supply and the energy demand, the consultancy on how the saving of energy is performed in order to reduce its waste, to count on equipment and efficient systems, to use domestic renewable energies and to use the solar energy and the biomass. [Spanish] La Comision Nacional para el Ahorro de Energia (CONAE) es el organo administrativo desconcentrado de la Secretaria de Energia que funge como organismo tecnico de consulta en materia de ahorro y uso eficiente de energia y aprovechamiento de energias renovables. Este documento busca informar a la poblacion acerca de como satisfacer la necesidad de energia a cambio de su utilizacion de manera inteligente, para ello se detectaron areas de oportunidad como: un balance entre la oferta y la demanda energetica, informar a la gente sobre como se efectua el ahorro de energia para con ello reducir el desperdicio de esta, contar con equipos y sistemas eficientes, usar energias renovables domesticas y utilizar la energia solar y la biomasa.

Calibration service of radiation detectors and dosemeters at IPEN/ Sao Paulo

Energy Technology Data Exchange (ETDEWEB)

Potiens, M.P.A.; Caldas, L.V.E. [IPEN, CNEN/SP, Sao Paulo (Brazil)]. e-mail: mppalbu@ipen.br

2006-07-01

The Calibration Laboratory of Instituto de Pesquisas Energeticas e Nucleares, IPEN, has already over 25 years been calibrating instruments used in radiation protection and therapy measurements and belonging to hospitals, industries, clinics and other users located in Sao Paulo and in other parts of Brazil. At the present time, the Calibration Laboratory is part of the Radiation Metrology Center and it acts in the Radiation Protection, Radiation Therapy, Nuclear Medicine and Diagnostic Radiology areas, using special set-ups with gamma and beta radiation sealed sources, alpha and beta radiation plane sources and low and intermediate energies of X radiation. Moreover, it has reference instruments for each calibration area with traceability to the Brazilian National Laboratory for Metrology of Ionizing Radiation (secondary standards) and international laboratories (primary standards). The number of tested instruments is increasing annually (from 170 in 1980 to 1871 in 2005), and for the development of new techniques and radiation detectors the continuous improvement of the existing calibration methods is necessary, as well as the establishment of new calibration services to be offered by the Calibration Laboratory for Brazilian and South American users. The objective of this study is to show the evolution of the calibration service developed at IPEN, describing the applied methods and the calibrated instruments types. The quality system implantation process following the basis of the NBR IEC/ISO 17025 standard is also presented with some tools used in the calibration procedures. (Author)

Calibration service of radiation detectors and dosemeters at IPEN/ Sao Paulo

International Nuclear Information System (INIS)

Potiens, M.P.A.; Caldas, L.V.E.

2006-01-01

The Calibration Laboratory of Instituto de Pesquisas Energeticas e Nucleares, IPEN, has already over 25 years been calibrating instruments used in radiation protection and therapy measurements and belonging to hospitals, industries, clinics and other users located in Sao Paulo and in other parts of Brazil. At the present time, the Calibration Laboratory is part of the Radiation Metrology Center and it acts in the Radiation Protection, Radiation Therapy, Nuclear Medicine and Diagnostic Radiology areas, using special set-ups with gamma and beta radiation sealed sources, alpha and beta radiation plane sources and low and intermediate energies of X radiation. Moreover, it has reference instruments for each calibration area with traceability to the Brazilian National Laboratory for Metrology of Ionizing Radiation (secondary standards) and international laboratories (primary standards). The number of tested instruments is increasing annually (from 170 in 1980 to 1871 in 2005), and for the development of new techniques and radiation detectors the continuous improvement of the existing calibration methods is necessary, as well as the establishment of new calibration services to be offered by the Calibration Laboratory for Brazilian and South American users. The objective of this study is to show the evolution of the calibration service developed at IPEN, describing the applied methods and the calibrated instruments types. The quality system implantation process following the basis of the NBR IEC/ISO 17025 standard is also presented with some tools used in the calibration procedures. (Author)

Characterization of a radiation detector for aircraft measurements

International Nuclear Information System (INIS)

Holanda M, L. de; Federico, C. A.; Caldas, L. V. E.

2014-08-01

Air crews, as pilots and flight attendants, are subjected to cosmic ray doses which can be higher than the average doses on workers from the nuclear industry. The diversity of particles of high energies present in the radiation field on board of air crafts turns the determination of the incident dose difficult, and requires special care regarding dosimetric systems to be used in this kind of radiation field. The Brazilian Air Force, through its Institute for Advanced Studies (Instituto de Estudos Avancados, IEAv/DCTA) in conjunction with the Institute of Energetic and Nuclear Research (Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP) are working on this subject since 2008. A prototype of a radiation detector for aircraft measurements was previously built and tested in flight and laboratory conditions. The detector is able of measuring a quantity known as absorbed dose (using passive dosimeters), which will subsequently be correlated to the ambient dose equivalent and the effective dose received by air crews. In this context, a theoretical approach through Monte Carlo simulations with the computational codes MCNP5 and MCNPX was used to model and characterize the detector response at such experimental conditions. This work presents the preliminary results of the computational modeling, with special emphasis on the comparison between the absorbed doses measured and simulated, and its relationship with the ambient dose equivalent and the effective dose for this detector. (author)

Characterization of a radiation detector for aircraft measurements

Energy Technology Data Exchange (ETDEWEB)

Holanda M, L. de; Federico, C. A.; Caldas, L. V. E., E-mail: lcaldas@ipen.br [Instituto de Pesquisas Energeticas e Nucleares, Av. Lineu Prestes 2242, Cidade Universitaria, CEP 05508-000, Sao Paulo (Brazil)

2014-08-15

Air crews, as pilots and flight attendants, are subjected to cosmic ray doses which can be higher than the average doses on workers from the nuclear industry. The diversity of particles of high energies present in the radiation field on board of air crafts turns the determination of the incident dose difficult, and requires special care regarding dosimetric systems to be used in this kind of radiation field. The Brazilian Air Force, through its Institute for Advanced Studies (Instituto de Estudos Avancados, IEAv/DCTA) in conjunction with the Institute of Energetic and Nuclear Research (Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP) are working on this subject since 2008. A prototype of a radiation detector for aircraft measurements was previously built and tested in flight and laboratory conditions. The detector is able of measuring a quantity known as absorbed dose (using passive dosimeters), which will subsequently be correlated to the ambient dose equivalent and the effective dose received by air crews. In this context, a theoretical approach through Monte Carlo simulations with the computational codes MCNP5 and MCNPX was used to model and characterize the detector response at such experimental conditions. This work presents the preliminary results of the computational modeling, with special emphasis on the comparison between the absorbed doses measured and simulated, and its relationship with the ambient dose equivalent and the effective dose for this detector. (author)

Description of the international scenarios and the renewable energies (Chapter 4 in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Descripcion de los escenarios internacionales y las energias renovables (Capitulo 4 en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

Energy Technology Data Exchange (ETDEWEB)

Mulas del Pozo, Pablo [Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

2005-08-15

In this chapter, energy scenarios made by different organizations are described, the majority foreign, and they do not represent an official version of the Secretaria de Energia of the Mexican government. 1. The IEO-2004, Projections to year 2025 of the Energy Information Agency (EIA) of the Department of Energy of the USA (DOE, USA). - it describes the world-wide energy situation with historical information (1970-2000) and projections to the future (2001-2025); 2. The WOE-2004, Projections to year 2030 of the Agency International of Energy of the Organization for Economic Cooperation and Development (AIE-OECD) - it describes the world-wide energy situation with historical information (1971-2002) and projections to the future (2002-2030); 3. The scenarios of Shell to year 2050; 4, Scenarios to year 2025 of the Agency International of Energy oriented to a sustainable future: it is a document published in the 2003, it contains the results of an exercise to develop three exploratory scenarios and a formative scenario/projections; 5. The study of the World-wide Council of Energy on the activators of the energy sector; 6. Other scenarios for Mexico are: Asian-Pacific Economic Cooperation, GEO-Mexico and the Centro de Investigacion de Energia de la Universidad Nacional Autonoma de Mexico. [Spanish] En este capitulo, se describen escenarios energeticos a largo plazo realizados por diferentes entidades, la mayoria extranjeras, y no representan una version oficial de la Secretaria de Energia del gobierno de Mexico. 1. El IEO-2004, Proyecciones al 2025 de la Energy Information Agency (EIA) del departamento de energia de los EUA (DOE, USA).- describe la situacion energetica mundial con informacion historica (1970-2000) y proyecciones a futuro (2001-2025); 2. El WOE-2004, Proyecciones al 2030 de la Agencia Internacional de Energia de la Organizacion para la Cooperacion y el Desarrollo Economico (AIE-OCDE).- describe la situacion energetica mundial con informacion historica

Description of the international scenarios and the renewable energies (Chapter 4 in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Descripcion de los escenarios internacionales y las energias renovables (Capitulo 4 en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

Energy Technology Data Exchange (ETDEWEB)

Mulas del Pozo, Pablo [Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

2005-08-15

In this chapter, energy scenarios made by different organizations are described, the majority foreign, and they do not represent an official version of the Secretaria de Energia of the Mexican government. 1. The IEO-2004, Projections to year 2025 of the Energy Information Agency (EIA) of the Department of Energy of the USA (DOE, USA). - it describes the world-wide energy situation with historical information (1970-2000) and projections to the future (2001-2025); 2. The WOE-2004, Projections to year 2030 of the Agency International of Energy of the Organization for Economic Cooperation and Development (AIE-OECD) - it describes the world-wide energy situation with historical information (1971-2002) and projections to the future (2002-2030); 3. The scenarios of Shell to year 2050; 4, Scenarios to year 2025 of the Agency International of Energy oriented to a sustainable future: it is a document published in the 2003, it contains the results of an exercise to develop three exploratory scenarios and a formative scenario/projections; 5. The study of the World-wide Council of Energy on the activators of the energy sector; 6. Other scenarios for Mexico are: Asian-Pacific Economic Cooperation, GEO-Mexico and the Centro de Investigacion de Energia de la Universidad Nacional Autonoma de Mexico. [Spanish] En este capitulo, se describen escenarios energeticos a largo plazo realizados por diferentes entidades, la mayoria extranjeras, y no representan una version oficial de la Secretaria de Energia del gobierno de Mexico. 1. El IEO-2004, Proyecciones al 2025 de la Energy Information Agency (EIA) del departamento de energia de los EUA (DOE, USA).- describe la situacion energetica mundial con informacion historica (1970-2000) y proyecciones a futuro (2001-2025); 2. El WOE-2004, Proyecciones al 2030 de la Agencia Internacional de Energia de la Organizacion para la Cooperacion y el Desarrollo Economico (AIE-OCDE).- describe la situacion energetica mundial con informacion historica

The development of heat exchangers with advanced thermomechanical materials; Sviluppi e prospettive degli scambiatori di calore ceramici per l`impiantistica energetica ad alta temperatura

Energy Technology Data Exchange (ETDEWEB)

Capra, Marcello [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dipt. Energia

1997-07-01

Current metallurgical limitations necessarily impose a number of restrictions on the efficiency of power plant and combustion systems. These limitations include both temperature and corrosion resistance. If significant improvements can be made in these areas, then not only will it be possible to obtain higher system efficiencies, but it will also be possible to further exploit new technologies. Consequently, there is appreciable interest in the development of ceramic tubes for heat exchangers. Such tubes would offer the potential of operation at much higher temperatures combined with a much improved resistance to chemical attack. They are unlikely to be suitable for high pressure operation, at least in the foreseeable future, and hence their use would be limited generally to gas to gas exchangers. In spite of the limitations on details and specific technological solutions imposed by industrial property conditions, this report provides an overview on the development of these components, which is in charge of all the major international industrial companies of the field, in consideration of the relevant benefits coming from their large industrialization. After an analysis of the industrial situation of the product, in terms both of possible applications and economical impacts on the market, an overview of major on-going R and D programmes is carried out. At present, these programmes are mostly within the general frame of the study of advanced thermomechanical components and the related manufacturing technologies development.

The energy geopolitics interests: the Initiative for South American Regional Integration - ISARI; Os interesses da geopolitica energetica: a Iniciativa para Integracao Regional Sul Americana - IIRSA

Energy Technology Data Exchange (ETDEWEB)

Jeronymo, Alexandre; Roig, Carla de Almeida; Guerra, Sinclair Mallet Guy [Universidade Federal do ABC (UFABC), Santo Andre, SP (Brazil). Programa de Pos-Graduacao em Energia], e-mail: alexandre.jeronymo@ufabc.edu.br, e-mail: carla.roig@ufabc.edu.br, e-mail: sguerra@ufabc.edu.br

2008-07-01

This work adds itself to the debates on the project Integration of South America Regional Infrastructure - ISARI. Its focus is related with Energy Geopolitics and the South America integration under the world system of commodities production. The ISARI, as a project oriented to the viability of low value aggregated which should be transported from the south american continent for consumption at the world market.

Optimization of Protocol CT, PET-CT, whole body; Optimizacion de protocolo CT, en PET-CT, de cuerpo entero

Energy Technology Data Exchange (ETDEWEB)

Gutierrez, Fredys Santos, E-mail: fsantos@ccss.sa.cr [Caja Costarricense de Seguro Social (ACCPR/CCSS), San Jose (Costa Rica). Area Control de Calidade Y Proteccion Radiologica; Namias, Mauro, E-mail: mnamias@gmail.com [Comision Nacional de Energia Atomica (FCDN/CNEA), Buenos Aires (Argentina). Fundacion Centro Diagnostico Nuclear

2013-11-01

The objective of this study was to optimize the acquisition protocols and processing existing of the CT PET/CT scanner for clinical use of Nuclear Diagnostic Center Foundation, a way to minimize the radiation dose while maintaining diagnostic image quality properly. Dosimetric data of PET / CT service were surveyed and obtained the baseline against which we compare and define strategies and modifications to develop online. We selected transaxial up to the pulmonary hilum and liver slices as the anatomical regions of interest that led to the standardization of the study.

OPTIMIZACION DE LA GESTION DE LAS OPERACIONES EN TIEMPO REAL EN LA INDUSTRIA FORESTAL: MODELOS, ALGORITMOS Y PROCEDIMIENTOS

OpenAIRE

EPSTEIN NUMHAUSER, RAFAEL DAVID

2013-01-01

La tendencia mundial en la gestión de las operaciones ha privilegiado el concepto producción "justo a tiempo" (o JIT por su sigla en inglés). El JIT fue incorporado por los japoneses en la industria manufacturera en los años 70's, específicamente en la fábrica de autos Toyota, siendo uno de los pilares del éxito japonés de la posguerra y de la recuperación de la industria norteamericana en este decenio. La filosofía JIT postula que el diseño estratégico de las operaciones debe pri...

Experimentacion y Optimizacion Conjunta de la Disrupcion Celular de Microalgas y Extraccion Soxhletde Aceite Para Alimentacion y Biocombustibles

Directory of Open Access Journals (Sweden)

Angel D González Delgado

2014-03-01

Full Text Available La producción de biocombustibles y bioproductos utilizando microalgas puede realizarse con tratamientos térmicos para producir biocrudo, o mediante la extracción y transformación de metabolitos específicos. Esta última alternativa incluye las etapas de cultivo, cosecha, secado, extracción de lípidos y purificación o transformación de los mismos. La factibilidad técnica y económica de la obtención de bioproductos derivados del aceite de microalgas depende en gran medida de la eficiencia de extracción de los lípidos. El objetivo principal de este trabajo es establecer una metodología para la disrupción celular y extracción soxhlet de aceite de microalgas, y determinar su efectividad en tres cepas nativas; Amphiprora, Desmodesmus y Tetraselmis. Se evaluó el efecto de distintos métodos de disrupción celular como MSA, MHA, HA4M Fast, y HA0.5M Slow,solventes como hexano, ciclohexano y metanol, y tiempos de extracción de 4,6 y 8 horas, sobre la cantidad de aceite extraído. La mayor eficiencia de extracción se obtuvo utilizando disrupción celular MSA. El mejor solvente fue hexano y el mejor tiempo de extracción fue de 8 horas.

Electrical limitations to energy resolution in semiconductor particle detectors; Limitations electriques du pouvoir de resolution en energie des detecteurs a semi-conducteurs; Ehlektricheskie ogranicheniya razreshayushchej sposobnosti po ehnergii v poluprovodnikovykh detektorakh chastits; Limitaciones electricas en la resolucion energetica de detectores de particulas a base de semiconductores

Energy Technology Data Exchange (ETDEWEB)

Hansen, W L; Goulding, F S [Lawrence Radiation Laboratory, University of California, Berkeley, CA (United States)

1962-04-15

Based on the assumption that the noise contribution of a semiconductor detector is due solely to its bulk properties, equations are presented which indicate the theoretical limits of noise in detectoramplifier combinations. These equations show that an optimum amplifier time-constant and detector bias voltage exist for which condition the minimum noise is independent of the semiconductor resistivity. The optimum performance of a detector-amplifier system is shown to depend only upon detector area, input capacity (less detector capacity), semiconductor minority carrier lifetime and the transconductance of the amplifier input tube. A new detector structure which includes a guard-ring electrode as an integral part of the detector structure is described which has the effect of largely eliminating noise due to surface leakage. Experimental results for detector leakage and energy resolution which agree well with theory are presented. The theoretical limit of noise, expressed as full width at half maximum, is from 7 to 10 keV for 1-cm{sup 2} p-type silicon detectors at 25{sup o}C. (author) [French] Partant de l'hypothese que le bruit imputable au detecteur a semi-conducteur est du exclusivement aux proprietes fondamentales du semi-conducteur, les auteurs etablissent des equations donnant les limites theoriques du bruit dans les combinaisons detecteur-amplificateur. Ces equations montrent qu'il existe une constante de temps optimum de l'amplificateur et une tension de polarisation du detecteur, pour lesquelles le bruit minimum est independant de la resistivite du semi-conducteur. Les auteurs prouvent que l'optimum de fonctionnement d'un ensemble detecteur-amplificateur ne depend que de la surface du detecteur, de la capacite a l'entree (deduction faite de la capacite du detecteur), du porteur minoritaire du semi-conducteur, de la duree de vie et de la transconductance du tube d'entree de l'amplificateur. Ils decrivent un modele nouveau de detecteur qui comprend une

Operation, safety and utilization of the RA reactor in 1978 - Report; Prilog I - Rad, sigurnost i iskoriscenost reaktora RA u 1978. godini - Izvestaj

Energy Technology Data Exchange (ETDEWEB)

Martinc, R; Stanic, A [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

1978-12-15

This report includes a review of work related to development of reactor operation capacities and increase of the RA reactor safety and economic operation. Statistical data about reactor operation and utilization are included as well. Introducing of the new 80% enriched fuel into the the reactor core enabled increase of the neutron flux, i.e. increase of its production capabilities. Safety and optimization analyses concerned with introduction of the new fuel have shown that the most safe and economic procedure was gradual introducing of the highly enriched fuel. This procedure was based on the concept of mixed core configuration with 2% and 80% enriched fuel elements. By applying this original concept the following significant savings were achieved: fuel elements savings, shortening of the annual period of reactor operation, savings in spent fuel casks, electric power savings, slowing down of heavy water degradation. [Serbo-Croat] Ovaj izvestaj sadrzi pregled o radu na razvoju eksploatacionih mogucnosti i povecanju sigurnosti i ekonomicnosti reaktora RA. Prilozeni su i statisticki podaci o radu i iskoriscenosti reaktora u 1978. godini. Uvodjenje novog 80% obogacenog goriva u jezgro reaktora omogucilo je povecanje neutronskog fluksa tj. povecanje njegovoh proizvodnih mogucnosti. Sigurnosne i optimizacione analize uvodjenja novog goriva pokazale su da je nasigurniji i najekonomicniji postupak postupnog uvodjenja visokoobogacenog goriva koji se zasniva na konceptu mesane resetke sa 2% i 80% obogacenim gorivom. Ovaj originalni koncept omogucio je da se postignu znatne ustede u gorivu, skracivanje godisnjeg rada reaktora, usteda sudova za odlaganje isluzenog goriva, usteda elektricne energije, usporavanje degradacije teske vode.

Energy matrix and CO{sub 2} balance; Matriz energetica e balanco de CO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Pessoa, Isac Quintao; Lins, Vanessa; Miranda, Luciano Lellis; Fullin Junior, Benjamin; Fabri, David Fagundes [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Engenharia Quimica], e-mails: Isacqp@ufmg.br, vlins@deq.ufmg.br, ll.miranda@uol.com.br, fullinjr@gmail.com, fabri8676@yahoo.com.br

2012-07-15

This paper presents the situation of global energy and national energy matrix and the change of a steel company with the substitution of mineral coke by charcoal and liquefied petroleum gas (LPG) to natural gas. In terms of energy efficiency, this paper presents the implementation of various projects for the energy used in the company. The World Steel Association methodology was used to calculate the reductions in CO{sub 2} emissions after the implanting of all projects. (author)

Generating power stations and optimization energetic of processes; Centrales generadoras y optimacion energetica de procesos

Energy Technology Data Exchange (ETDEWEB)

Gutierrez Ramirez, Ranulfo; Fernandez Montiel, Manuel Francisco [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

Some recent experiences of the Management of Thermal Processes of the Instituto de Investigaciones Electricas (IIE) related to the works on generating power stations of electricity, plants of cogeneration and energy saving are presented. [Spanish] Se presentan algunas experiencias recientes de la Gerencia de Procesos Termicos del Instituto de Investigaciones Electricas (IIE) relacionadas con los trabajos sobre centrales generadoras de electricidad, plantas de cogeneracion y ahorro de energia.

Environmental school aids to the energetic education; La escuela ambiental contribuye a la educacion energetica

Energy Technology Data Exchange (ETDEWEB)

Benavides, B. A. C.; Coto, C. J. M.

2004-07-01

Elementary school is a propitious space to contribute to knowledge and adoption of habits related to the use of environmentally friendly energies. This article refers to a methodological strategy used in education for renewable energies, specifically solar energy, within the framework of the environmental school. Its objective is to share a successful strategy to diffuse the thermal applications of solar energy for home and school. (Author)

Public exposure due to radioactive liquid effluent discharges from Instituto de Pesquisas Energeticas Nucleares/IPEN

International Nuclear Information System (INIS)

Rocca, Fatima F.D.

1995-01-01

The physical and social-economic characterization of aquatic environment influenced by IPEN was performed and possible exposure pathways were identified. The effective dose equivalent to the critical groups were estimated by using a mathematic model that simulate radionuclide transport through environment components, and dosimetric models that relate activity at environment components to public exposure. This study has concluded that there is not a single critical group that receives the highest dose equivalents from the source, but all the populational groups potentially exposed receive doses at the same level, and then all of them must be considered in a radiological assessment process. The results showed that the public exposure due to liquid discharges from IPEN remains bellow established dose limits. (author). 58 refs., 28 figs., 24 tabs

Rural electric power infrastructure and infantile work; Infraestrutura energetica rural e incidencia de trabalho infantil

Energy Technology Data Exchange (ETDEWEB)

Schmid, Aloisio Leoni [Parana Univ., Curitiba, PR (Brazil). Dept. de Arquitetura]. E-mail: alschmid@uol.com.br

2000-07-01

Based both on the data available at the IBGE (Brazilian Geographic and Statistical Institute) Worldwide Web site from the Censo Agropecuario de 1996 and on the premise, that human energy is one of the most important energy sources in rural areas, the existence of a correlation of infant work and electric energy infrastructure in Brazilian rural properties was investigated. The verification was conducted first by Municipality, and second by product. Analysis covered agriculture, poultry and extractive practices. As a result, first part led to no correlation at all. However, the second part suggested a correlation to exist between share of rural workers under 14 and share of rural properties not having access to electric energy services. This correlation refers to the share of workers being both under 14 and belonging to the owner's family, corroborating the indication, in the literature, of infant work being a familiar tradition in the Brazilian countryside. Finally, the advance of the investigations with an approach more specific to region and character of economic activity is recommended. (author)

RENAP-MP: national PWR - medium nuclear power plant

International Nuclear Information System (INIS)

Meldonian, N.L.; Yamaguchi, M.; Kosaka, N.; Moreira, J.M.L.

1994-01-01

In this work are presented the main characteristics of a medium nuclear power plant, named RENAP - MP which has been developed by the Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN - SP) and Coordenadoria para Projetos Especiais (COPESP) from de Brazilian Navy. The study aims at determining the necessary conditions for such a plant complete, in Brazil, technically and economically with other means of thermal power generation, such as coal, gas and oil. Results show that the energy average cost should be around 59 dollars/MWh; the construction time should be less than 5 years in order to reduce financial costs; and the design should emphasize the use of inherently safe technology, in order to reduce substantially the risks of nuclear accidents. It should be pointed out that the nuclear power technology has some environmental and social advantages when compared to hydro and other thermal power technologies, since it does not require flooding of large areas, reduces green house and acid rain effects, and can be located near consumption areas. (author). 11 refs, 5 tabs

Survey on the consumptions of energy sources in the industry in Italy in 1999; Indagine sugli impieghi delle fonti energetiche nel settore industria in Italia. Anno 1999

Energy Technology Data Exchange (ETDEWEB)

Iorio, G. [ENEA, Funzione Centrale Studi, Centro Ricerche Casaccia, Rome (Italy); Perrella, G. [ENEA, Divisione Promozione degli Usi Efficienti e Diversificazione dell' Energia, Centro Ricerche Casaccia, Rome (Italy); Ballin, M. [Istituto Nazionale di Statistica, Dipt. Statistiche Economiche, Rome (Italy); Mercanti, A.; Poggi, A. [Ministero delle Attivita' Produttive, Direzione Generale dell' Energia e delle Risorse Minerarie, Rome (Italy)

2001-07-01

This report has the aim to introduce the results of the sampling survey performed to determinate the consumption of energy sources (electricity, natural gas, fuel oil, diesel oil, etc.) in the italian industry. The energy consumptions report to 1999 and they are disaggregated for typology of use: energy consumptions for productive uses, for production of energy and for traction. The energy intensive sectors and the great industries have represented the nucleus of survey. Particular attention has been devoted to the production of energy and the consumption of heat. [Italian] Il presente rapporto ha l'obiettivo di presentare i risultati dell'indagine campionaria effettuata per determinare il consumo di fonti energetiche (energia elettrica, gas naturale, olio combustibile, gasolio, ecc.) nell'industria italiana. I consumi energetici si riferiscono al 1999 e sono disaggregati per tipologia di utilizzo: consumi energetici per usi produttivi, per produzione di energia e per trazione. I settori ad alta intensita' energetica e le grandi imprese hanno rappresentato il nucleo dell'indagine. Particolare attenzione e' stata dedicata alla produzione di energia e al consumo di calore.

Beam standardization of X radiation in computed tomography

International Nuclear Information System (INIS)

Maia, Ana F.; Caldas, Linda V.E.

2005-01-01

The ionization chamber used in dosimetric procedures in computed tomography beams (CT), is a cylindrical chamber, unsealed, with the sensitive length between 10 and 15 cm, named pencil ionization chamber. Because the doses involved in CT procedures are higher s than those in the procedures in radiology, it is very important to ensure the appropriate calibration of pencil ionization chambers and thus the accuracy of Dosimetric procedures. Recently, only the Calibration Laboratory, from Institute de Pesquisas Energeticas e Nucleares, had standards fields of conventional radiodiagnostic, but not arrived to include the energy range used in CT. In this work, will be shown the results obtained in standard field of radiodiagnostic - all qualities of radiodiagnostic of series RQR (direct beam) and RQA (attenuated beam) described in IEC 61267 norm - in an industrial X-ray equipment of the Calibration Laboratory. The recommended qualities for the calibration of TC chambers are the qualities RQA9 and RQR9. The other qualities will be used for calibration of other radiodiagnostic dosimeters and also for a larger study of the energy dependence of the pencil ionization chambers

Project of an integrated calibration laboratory of instruments at IPEN

International Nuclear Information System (INIS)

Barros, Gustavo Adolfo San Jose

2009-01-01

The Calibration Laboratory of Instruments of Instituto de Pesquisas Energeticas e Nucleares offers calibration services of radiation detectors used in radioprotection, diagnostic radiology and radiotherapy, for IPEN and for external facilities (public and private). One part of its facilities is located in the main building, along with other laboratories and study rooms, and another part in an isolated building called Bunker. For the optimization, modernization and specially the safety, the laboratories in the main building shall be transferred to an isolated place. In this work, a project of an integrated laboratory for calibration of instruments was developed, and it will be an expansion of the current Calibration Laboratory of Instruments of IPEN. Therefore, a series of radiometric monitoring of the chosen localization of the future laboratory was realized, and all staff needs (dimensions and disposition of the study rooms and laboratories) were defined. In this project, the laboratories with X ray equipment, alpha and beta radiation sources were located at an isolated part of the building, and the wall shielding was determined, depending on the use of each laboratory. (author)

Project of an integrated calibration laboratory of instruments at IPEN; Projeto de um laboratorio integrado de calibracao de instrumentos no IPEN

Energy Technology Data Exchange (ETDEWEB)

Barros, Gustavo Adolfo San Jose

2009-07-01

The Calibration Laboratory of Instruments of Instituto de Pesquisas Energeticas e Nucleares offers calibration services of radiation detectors used in radioprotection, diagnostic radiology and radiotherapy, for IPEN and for external facilities (public and private). One part of its facilities is located in the main building, along with other laboratories and study rooms, and another part in an isolated building called Bunker. For the optimization, modernization and specially the safety, the laboratories in the main building shall be transferred to an isolated place. In this work, a project of an integrated laboratory for calibration of instruments was developed, and it will be an expansion of the current Calibration Laboratory of Instruments of IPEN. Therefore, a series of radiometric monitoring of the chosen localization of the future laboratory was realized, and all staff needs (dimensions and disposition of the study rooms and laboratories) were defined. In this project, the laboratories with X ray equipment, alpha and beta radiation sources were located at an isolated part of the building, and the wall shielding was determined, depending on the use of each laboratory. (author)

Ricerca della Supersimmetria ad ATLAS nel canale h->bb

CERN Document Server

Di Sipio, Riccardo

Il Modello Standard (MS), fino ad una scala di energie di circa 100GeV, e' attualmente la teoria che descrive con il migliore accordo sperimentale il mondo delle particelle elementari e le loro interazioni. Tuttavia, e' ampiamente riconosciuto che questa non pu`o essere considerata una “teoria ultima” per diverse ragioni. Ci si aspetta quindi che che il MS sia valido fino ad una scala energetica di cutoff MW ∼100GeV, oltre la quale bisogna ricorrere ad una “Nuova Fisica”. Questa scala di energie viene spesso identificata con quella delle Grand Unified Theories (GUT), in cui sono unificate le interazioni Forte ed Elettrodebole, ed e' nell’ordine di MGUT ∼ 10^15 GeV. L’unico aspetto non ancora verificato sperimentalmente del MS e' il settore di Higgs. La supersimmetria fornisce una soluzione al problema della gerarchia perch ́e implica un ugual numero di gradi di libert`a bosonici e fermionici, i quali danno contributi di segno opposto nelle correzioni a loop che cancellano esattamente le diver...

Survey on the consumptions of energy sources in the tertiary sector in Italy in 1999; Indagine sui consumi di fonti energetiche nel settore terziario in Italia. Anno 1999

Energy Technology Data Exchange (ETDEWEB)

Iorio, G. [ENEA, Funzione Centrale Studi, Centro Ricerche Casaccia, Rome (Italy); Perrella, G. [ENEA, Divisione Promozione degli Usi Efficienti e Diversificazione dell' Energia, Centro Ricerche Casaccia, Rome (Italy); Ballin, M. [Istituto Nazionale di Statistica, Dipt. Statistiche Economiche, Rome (Italy)

2001-07-01

This report has the aim to introduce the results of the sampling survey performed to determinate the consumption of energy sources (electricity, natural gas, fuel oil, diesel oil, etc.) in the tertiary sector. The energy consumptions report to 1999 and they are disaggregated for typology of use: energy consumptions for productive uses, for production of energy and for traction. The economic energy intensive activities have represented the nucleus of the survey. Particular attention has been devoted to the production of energy and the consumption of heat. [Italian] Il presente rapporto ha l'obiettivo di presentare i risultati dell'indagine campionaria effettuata per determinare il consumo di fonti energetiche (energia elettrica, gas naturale, olio combustibile, gasolio, ecc.) nel settore terziario. I consumi energetici si riferiscono al 1999 e sono disaggregati per tipologia di utilizzo: consumi energetici per usi produttivi, per produzione di energia e per trazione. Le attivita' economiche ad alta intensita' energetica hanno rappresentato il nucleo dell'indagine. Particolare attenzione e' stata dedicata alla produzione di energia e al consumo di calore.

Survey on the consumptions of energy sources in the tertiary sector in Italy in 1999; Indagine sui consumi di fonti energetiche nel settore terziario in Italia. Anno 1999

Energy Technology Data Exchange (ETDEWEB)

Iorio, G [ENEA, Funzione Centrale Studi, Centro Ricerche Casaccia, Rome (Italy); Perrella, G [ENEA, Divisione Promozione degli Usi Efficienti e Diversificazione dell' Energia, Centro Ricerche Casaccia, Rome (Italy); Ballin, M [Istituto Nazionale di Statistica, Dipt. Statistiche Economiche, Rome (Italy)

2001-07-01

This report has the aim to introduce the results of the sampling survey performed to determinate the consumption of energy sources (electricity, natural gas, fuel oil, diesel oil, etc.) in the tertiary sector. The energy consumptions report to 1999 and they are disaggregated for typology of use: energy consumptions for productive uses, for production of energy and for traction. The economic energy intensive activities have represented the nucleus of the survey. Particular attention has been devoted to the production of energy and the consumption of heat. [Italian] Il presente rapporto ha l'obiettivo di presentare i risultati dell'indagine campionaria effettuata per determinare il consumo di fonti energetiche (energia elettrica, gas naturale, olio combustibile, gasolio, ecc.) nel settore terziario. I consumi energetici si riferiscono al 1999 e sono disaggregati per tipologia di utilizzo: consumi energetici per usi produttivi, per produzione di energia e per trazione. Le attivita' economiche ad alta intensita' energetica hanno rappresentato il nucleo dell'indagine. Particolare attenzione e' stata dedicata alla produzione di energia e al consumo di calore.

The South American energy policies: regional problems and national logics; As politicas energeticas Sul-Americanas: problemas regionais e logicas nacionais

Energy Technology Data Exchange (ETDEWEB)

Le Prioux, Bruna [Centro de Pesquisa e Documentacao da America Latina (CREDAL) (France)

2010-07-01

The international energy context in the first decade of the 21st century can be described by the following points. First, the growing concerns with climatic changes and the greenhouse effect, which the main cause is the massive use of fossil fuels. Second, the energy vulnerability, due to the mistrust in the main hydrocarbon producers, to the increasing consumption from the so-called developing countries and to the idea of a possible end of oil reserves. And third, as a consequence of the least factor, an intense speculation in international market has increased the prices of oil barrel and gas since 2005. In this context, each country tries to adapt to their way of such changes. Beyond local solutions, South American countries have historic attempts of regional integration through energy, which can be presented as a complement of national policies. This research focuses on the study of the gas energy policy of some producers' and consumers' countries in South America, their choices and procedures in the national and international scope. Thus, the main goal of this article is to analyze how national energy policies affect the regional energy action of these South American countries. In order to answer this question, our goals are: (1) diagnosing the energy potentialities and disadvantages of each country; (2) identifying concepts related to energy questions; and (3) relating the two past steps to analyze the energy interaction in South America. The countries selected to this research are: Brazil, Argentina and Chile, due to their economic magnitude in South America and their intense energy consumption; and Bolivia and Venezuela, due to their energy reserves and surplus. The study of national energy systems was made through SWOT analysis (Strengths, Weaknesses, Opportunities and Threat), in order to have a synthetically diagnosis about the energetic potentials and disadvantages of each country. Thereafter, we intersect this data with concepts as

Beam standardization and dosimetric methodology in computed tomography

International Nuclear Information System (INIS)

Maia, Ana Figueiredo

2005-01-01

Special ionization chambers, named pencil ionization chambers, are used in dosimetric procedures in computed tomography beams (CT). In this work, an extensive study about pencil ionization chambers was performed, as a contribution to the accuracy of the dosimetric procedures in CT beams. The international scientific community has recently been discussing the need of the establishment of a specific calibration procedure for CT ionization chambers, once these chambers present special characteristics that differentiate them from other ionization chambers used in diagnostic radiology beams. In this work, an adequate calibration procedure for pencil ionization chambers was established at the Calibration Laboratory, of the Institute de Pesquisas Energeticas e Nucleares, in accordance with the most recent international recommendations. Two calibration methodologies were tested and analyzed by comparative studies. Moreover, a new extended length parallel plate ionization chamber, with a transversal section very similar to pencil ionization chambers, was developed. The operational characteristics of this chamber were determined and the results obtained showed that its behaviour is adequate as a reference system in CT standard beams. Two other studies were performed during this work, both using CT ionization chambers. The first study was about the performance of a pencil ionization chamber in standard radiation beams of several types and energies, and the results showed that this chamber presents satisfactory behaviour in other radiation qualities as of diagnostic radiology, mammography and radiotherapy. In the second study, a tandem system for verification of hal'-value layer variations in CT equipment, using a pencil ionization chamber, was developed. Because of the X rays tube rotation, the determination of half-value layers in computed tomography equipment is not an easy task, and it is usually not performed within quality control programs. (author)

Improving the competitiveness of the Spanish port system by optimizing the cargo service; Mejora de la competitividad del Sistema Portuario Espanol mediante la optimizacion del servicio de manipulacion de mercancias

Energy Technology Data Exchange (ETDEWEB)

Almazan Garate, J. L.; Parra Serrano, M. P.

2012-07-01

Port services are responsible for most of the cost for the passing of goods through the port, especially the cargo handling service. Reliability and efficiency in the provision of them are key in a sector where there is a high opacity. With this study, we provide the responsible Administration, the Port Authority, with a tool that will help to objectify the decision making process, both at the time of granting the required licenses and during the period of the service provision. Also, proposes a number of measures w hoses implementation would improve the conditions of the service delivery and will reduce the total cost of transporting goods through the port. (Author) 11 refs.

Research coordination meeting of the coordinated research project on analytical and experimental benchmark analyses of accelerator driven systems. Working material

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

The Technical Meeting hosted at the Belarus National Academy of Sciences in Minsk by the Joint Institute of Power Engineering and Nuclear Research 'SOSNY' from 5-9 December 2005 was the kick-off Research Coordination Meeting (RCM) of the IAEA Coordinated Research Project (CRP) on 'Analytical and Experimental Benchmark Analyses of Accelerator Driven Systems (ADS)'. The CRP had received proposals for research agreements and contracts from scientists representing the following 25 institutions: Centro Atomico Bariloche, SCK CEN Mol, Instituto de Pesquisas Energeticas e Nucleares Sao Paulo, Joint Institute of Power Engineering and Nuclear Research SOSNY Minsk, China Institute of Atomic Energy, CEA Cadarache, CNRS Paris, FZ Rossendorf, FZ Karlsruhe, Budapest University of Technology and Economics, Politecnico di Torino, Japan Atomic Energy Agency, Nuclear Research and Consultancy Group (NRG) Petten, Pakistan Institute of Nuclear Science and Technology, AGH-University of Science and Technology Krakow, Institute of Atomic Energy Otwock/Swierk, ITEP Moscow, MEPHI Moscow, Kurchatov Institute, JINR Dubna, Universidad Politecnica de Madrid, CIEMAT Madrid, Royal Institute of Technology Stockholm, National Science Center 'Kharkov Institute and Technology', and Argonne National Laboratory). These institutions represent 18 IAEA Member States (i.e., Argentina, Belarus, Belgium, Brazil, China, France, Germany, Hungary, Italy, Japan, Netherlands, Pakistan, Poland, Russia, Spain, Sweden, Ukraine, USA), and one International Organization (JINR Dubna). The overall objective of the CRP is contributing to the generic R and D efforts in various fields common to innovative fast neutron system development, i.e., heavy liquid metal thermal hydraulics, dedicated transmutation fuels and associated core designs, theoretical nuclear reaction models, measurement and evaluation of nuclear data for transmutation, and development and validation of calculational methods and codes. Ultimately, the CRP

Impurities determination on nuclear fuel element components for the IEA-R1 research reactor by analytical methods based on ED-XRF and ICP-OES

International Nuclear Information System (INIS)

Reis, Edson Luis Tocaia dos; Scapin, Marcos; Cotrim, Marycel Elena Barboza; Salvador, Vera Lucia; Pires, Maria Aparecida Faustino

2009-01-01

The production of nuclear fuel used in the research reactor at Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP) requires a series of chemical and metallurgical processes. The quality of the end product depends on the control over all the stages of the manufacturing process and over the quality of raw materials employed. In fact, spectrometric methods are increasingly used as quantitative analytical techniques applicable to uranium compounds because of simultaneous determination of several elements with minimum amounts of sample. However, the main obstacle of uranium compounds analysis by spectrometric techniques such as optical emission spectrometry with inductively coupled plasma (ICP-OES) is the complex emission spectrum of uranium. The ICP-OES is not appropriately capable of determining the major elements of interest without initial chemical separation of uranium. In this sense, the use of X-ray fluorescence spectrometry (XRF) has been considered for quantitative determination of main elements with the advantage of not being destructive and not requiring a prior preparation of samples for analysis. Due to the simplicity of this technique, its applicability includes research and quality control in universities, research institutions, petrochemical industries, metallurgy, mining, etc. In this work, some components considered impurities in nuclear fuel element samples used in the IEA-R1 research reactor of IPEN/CNEN-SP were chemically characterized by ICP-OES analysis after chromatography extraction separation by using TBP/XAD-14 system and compared to results obtained by energy dispersive X-ray fluorescence spectrometry (EDXRF) and wavelength dispersive X-ray fluorescence (WDXRF). (author)

Demand management by means of substitution energetics in home cooking: Costa Rica's metropolitan area; Gerenciamento da demanda mediante substituicao energetica na coccao residencial: regiao metropolitana da Costa Rica

Energy Technology Data Exchange (ETDEWEB)

Herrera, Alfonso Herrera

1996-07-01

The electric power system management in Costa Rica is analyzed. The possibility of substitution of LPG (Liquefied Petroleum Gas) for electric power, in home cooking, are identified as one of the most important program in order to reduce increasing load peak and energy requirements in electric power system of Costa Rica. The sustain ability of the substitution program stands on the current process of electric power supply. The primary power sources used in generating electric power in rush hours are oil-based; this process is less efficient than directly using LPG for home cooking. Large scale substitution with LPG in home cooking will reduce increasing electric power demand in peak hours, reducing subsidized electricity sales, with better use of combustibles presently imported, improving the country commercial balance and preventing or postponing electric power system expansion investments. Three different perspectives have been considered in evaluating economical effectiveness in substituting power sources: user, utility and society perspectives. Due to subsidized electric power prices, residential users do not enough interest in substituting of LPG for power source; unless LPG cookers are also subsidized. However, positive results for the distribution utility are enough in order to offer these kind of incentives. Explicit treatment of these kind of programs, including the efficiency increment as an available resource for electric power utilities in Costa Rica, will avoid the implantation of most of combustion plants now planned in current National Electric Power Plant expansion program. (author)

Study for optimization of a {sup 60} Co industrial irradiator of 250 k Ci.; Estudio para la optimizacion de un irradiador industrial de {sup 60} Co de 250 kCi.

Energy Technology Data Exchange (ETDEWEB)

Pina V, G

1996-12-31

This work presents results of a benchmark between calculated and experimental absorbed dose values for a typical product, in a {sup 60} Co industrial irradiator, located at ININ, Mexico. The goal of this work is to reach a {+-} 10 % approximation between both values. ININ {sup 60} Co industrial irradiator is a two level, two layer system with overlapping product configuration, 56 irradiation positions with an activity of around 250 k Ci. Calculated values were obtained by QAD-CGGP code. This code uses a point kernel technique, build-up factors fitting was done by geometrical progression and combinatorial geometry was used for 3 D system description. Main code modifications were related with source simulation by punctual sources and energy spectrum (16 energy groups) and anisotropic emission were also considered. Experimental data were obtained from routine dosimetry which was done with red acrylic pellets; they were irradiated together the product in predetermined positions, for 36 maximum and minimum absorbed dose values. Typical product was polypropylene Petri dish packages, apparent density 0.13 g/cm{sup 3}. It was chosen because regular geometry (2 packages per full irradiator container) and enough amount for considering homogeneous loading inside irradiation chamber. Required minimum dose was 15 kGy. Results showed a 8% variation between calculated and experimental values for maximum absorbed dose (18.2 kGy vs 16.8 kGy) and 3 % variation for minimum absorbed dose (13.8 kGy vs 14.3 kGy); these results fixed with the original proposal. (Author).

Tabu search, a versatile technique for the functions optimization; Busqueda Tabu, una tecnica versatil para la optimizacion de funciones

Energy Technology Data Exchange (ETDEWEB)

Castillo M, J.A. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

2003-07-01

The basic elements of the Tabu search technique are presented, putting emphasis in the qualities that it has in comparison with the traditional methods of optimization known as in descending pass. Later on some modifications are sketched that have been implemented in the technique along the time, so that this it is but robust. Finally they are given to know some areas where this technique has been applied, obtaining successful results. (Author)

Doses optimization to patients in computed tomography studies; Optimizacion de las dosis a pacientes en estudios de tomografia computada

Energy Technology Data Exchange (ETDEWEB)

Trujillo Z, F. E., E-mail: flaviotrujillo@gmail.co [Hospital Regional de Alta Especialidad de Oaxaca, Aldama s/n, Paraje El Tule, 71256 San Bartolo Coyotepec, Oaxaca (Mexico)

2010-09-15

in recent years the number of studies of computed tomography has been increased, as well as the technology and methodology of these, while the radiological protection to the patient has not advanced to the same step. The IAEA has implemented the Patients Radiation Protection projects, where one of the areas of more interest is the computed tomography. The present work is a brief summary of the actions to realize for the doses optimization imparted to the patients, obtaining an appropriate diagnostic quality in the images at the same time; as it was presented in the course of the project C-RLA/9/067-001. The results that were obtained between Image Quality and Dose by Radiation that is imparted to the patient are shown, as well s the exposition factors that influence in these, according to the project C-RLA/9/067-001. The main actions for the dose optimization are using tension optimized protocols (kV), of load (m As), of collimation/cut thickness, of inclination of the gantry, of the pitch/displacement by rotation, of the reconstruction algorithm (kernel), according to the diagnostic objective to reach and to the patient physical characteristics (like weight and age), as well as to use protections to shield the sensitive organs (mainly those that do not have clinical interest for the procedure). Conclusion: To establish or to begin to implement, insofar as possible, the IAEA recommendations, relating to the clinical practice of the hospitals in Mexico and to the available equipment s type. (Author)

Optimisation of the cleaning sequence for reverse osmosis membranes; Optimizacion de secuencias de lavado de membranas de osmosis inversa

Energy Technology Data Exchange (ETDEWEB)

Hassani Zerrouk, M.; Quiroga Alonso, J. M.; Lopez Ramirez, J. A.

2005-07-01

Membranes used in water treatment lose performance along the time, in according to membrane kind, feed water characteristics and operating conditions. Fouling is the most important issue associated to membrane technology and for minimising it is necessary to clean membranes correctly. The main goal of this paper is to describe procedures and products that allow effective cleaning of reverse osmosis membranes, used to treat secondary effluents from activated sludges, which lead to a decrease in plant exploitation costs. (Author) 9 refs.

Optimization of Gamma-Ray Counting and Spectrometry in Biomedical Tracer Studies; Optimisation du Comptage et de la Spectrometrie des Rayons Gamma dans des Etudes Biomedicales Faites a l'Aide de Traceurs; Optimizatsiya gamma-scheta i spektrometrii gamma-luchej v biomeditsinskikh issledovaniyakh s pomoshch'yu indikatorov; Optimizacion del Recuento y de la Espectrometry Gamma en los Estudios Biomedicos con Indicadores

Energy Technology Data Exchange (ETDEWEB)

Guinn, V. P. [General Dynamics Corporation, San Diego, CA (United States)

1965-10-15

administrar la menor cantidad de radioisotopos compatible con una medicion suficientemente precisa de la radiactividad. Lo mismo sucede, por razones toxicologicas, cuando se administran elementos estables (en torma de compuestos) o isotopos estables enriquecidos (tambien en forma de compuestos) y se analizan por radiactivacion las muestras correspondientes. El autor ha estudiado con cierto detalle el problema de la optimizacion del recuento de uno, dos y tres radioisotopos emisores gamma por centelleo con Nal(Tl) y espectrometria mono y multicanal, prestando especial atencion a los estudios efectuados por marcacion simple, doble o triple con los radioisotopos mas frecuentemente usados en los estudios biomedicos: {sup 51}Cr, {sup 198}Au, {sup 75}Se, {sup 197}Hg, {sup 64}Cu, {sup 76}As, {sup 82}Br, {sup 59}Fe, {sup 60}Co, {sup 42}K, y {sup 24}Na. Como las mismas consideraciones son aplicables al analisis corriente por activacion con neutrones termicos de los elementos correspondientes o de los isatopos estables enriquecidos, los resultados de los calculos de la optimizacion del recuento tienen una utilidad doble. Esos calculos parten de unas pocas suposiciones razonables basadas en consideraciones biomedicas practicas: a) muestras pequenas ( Less-Than-Or-Equal-To 10 cm{sup 3}) ; b) tiempos de recuento de mediana duracion ( Less-Than-Or-Equal-To 10 minutos) ; c) cortos perfodos de espera antes de la medicion ( Less-Than-Or-Equal-To 3 dias) y d) empleo de equipo de recuento y blindaje de tipo comercial. Partiendo de esta base se ha determinado cuales son los metodos mas sensibles de recuento para los mencionados radioisotopos y para algunas combinaciones de dos o tres de ellos. El recuento se ha estudiado en funcion de las siguientes variables: a) tipo del cristal de Nal(Tl), macizo o de cavidad; b) tamafio del cristal de Nal(Tl), hasta 5 x 5 pulg; c) equipo de medicion: escalfmetro simple, analizador de amplitudes de impulso monocanal o multicanal. Para cada circunstancia Sptima

Use of information technologies to contribute for optimizing the safety radiation management in Cuba; Uso de las tecnologias de la informacion, para contribuir a la optimizacion de la gestion de la seguridad radiologica en Cuba

Energy Technology Data Exchange (ETDEWEB)

Valdes Ramos, M.; Prendes Alonso, M.; Hernandez Saiz, A.; Manzano de Armas, J., E-mail: zury@cphr.edu.cu [Agencia de Energia Nuclear y Tecnologias de Avanzada (CPHR/AENTA), La Habana (Cuba). Centro de Proteccion e Higiene de las Radiaciones

2013-11-01

This paper presents the results achieved in Cuba, with the development of a group of information management tools to implement radiation safety systemic and proactive approaches to safety and ICT supported. These tools were designed for different organisms with responsibility for the security at the country level, to the regulatory authority, for user entities, for individual monitoring services and other radiation protection services. It describes the philosophy of information management model used, the characteristics of the developed tools and their integration, the work performed for the homogenization of information available and the ability to capture and deliver data at different levels in decision making. The tools developed are based on the use of variables and indicators of importance to the safety and the systemic approach adopted allows to facilitate the optimization process for supervision of safety practices as well as contribute to the management of knowledge in radiation safety, through a synergistic combination of process data, information, information management systems, and the creative and innovative radiation safety experts.

Optimization and studies of the welding processes, automation of the sealing welding system and fracture mechanics in the vessels surveillance in nuclear power plants; Optimizacion y estudios de los procesos de soldadura, automatizacion del sistema de soldadura de sellado y mecanica de fractura en la vigilancia de vasijas en nucleoelectricas

Energy Technology Data Exchange (ETDEWEB)

Gama R, G.

2011-07-01

Inside this work the optimization of two welding systems is described, as well as the conclusion of a system for the qualification of containers sealing in the National Institute of Nuclear Research that have application in the surveillance programs of nuclear reactors vessels and the correspondent extension of the operation license. The test tubes Charpy are assay to evaluate the embrittlement grade, when obtaining the increment in the reference temperature and the decrease of the absorbed maximum energy, in the transition curve fragile-ductile of the material. After the test two test tube halves are obtained that should take advantage to follow the surveillance of the vessel and their possible operation extension, this is achieved by means of rebuilding (being obtained of a tested test tube two reconstituted test tubes). The welding system for the rebuilding of test tubes Charpy, was optimized when diminishing the union force at solder, achieving the elimination of the rejection for penetration lack for spill. For this work temperature measurements were carried out at different distances of the welding interface from 1 up to 12 mm, obtaining temperature profiles. With the maximum temperatures were obtained a graph and equation that represents the maximum temperature regarding the distance of the interface, giving as a result practical the elimination of other temperature measurements. The reconstituted test tubes were introduced inside pressurized containers with helium of ultra high purity to 1 pressure atmosphere. This process was carried out in the welding system for containers sealing, where an automatic process was implemented by means of an application developed in the program LabVIEW, reducing operation times and allowing the remote control of the process, the acquisition parameters as well as the generation of welding reports, avoiding with this the human error. (Author)

Optimization of Edwards vacuum coating unit model E12E for the production of thin films.; Optimizacion de la evaporadora Edwards modelo E12E para la fabricacion de peliculas delgadas.

Energy Technology Data Exchange (ETDEWEB)

Ruiz P, H S

1995-10-01

This work is about an Edwards vacuum coating unit model E12E, it shows the principle of vacuum thermal evaporation, some observations in the operation of vacuum diffusion pumps, mechanical pumps, vacuum gauge, Penning and Pirani, and some equations of leak vacuum, after the modifications and additions of Edwards vacuum coating unit for optimization, the last part contains a concise introduction about thin films and one specific application, it also contains the recommendations and requirements to keep the system in good conditions. (Author).

Specialization in energetical area. Training of post graduate; Especializacion en el area energetica. Formacion de postgrado

Energy Technology Data Exchange (ETDEWEB)

Sanchez, F. J.; Aguero, J. J.

2006-07-01

This article describes the experience in the collaboration between the University and Tecnatom in the development of Master-degree programmes in the area of energy. It analysis two post graduate courses already developed: the Master in Technologies of Electrical Power Generation and the Master in Energetic Efficiency both delivered in cooperation with the Escuelas Tecnicas Superiores de Ingenieros Industriales of Madrid and Barcelona Politecnica University respectively. (Author)

Energetic efficiency in the consumption sectors in Brazil; Eficiencia energetica nos setores de consumo no Brasil

Energy Technology Data Exchange (ETDEWEB)

Soares, Jeferson B. [Empresa de Pesquisa Energetica (EPE), Rio de Janeiro, RJ (Brazil); Achao, Carla L.; Garcia, Agenor G.; Martins, Jose M.D.; Oliveira, Ricardo G. de; Queiroz, Renato P.

2008-07-01

The present paper aims to assess long run energy savings for Brazil in the long term, according to economic scenarios established in Energy National Plan 2030 (PNE 2030). Methodological issues are presented as well as the basic assumptions for each scenario/end use consumption and related energy/electricity savings. In 2030, Brazilian industrial and transportation sectors still account for the large share of total energy savings (more than 80% in 2030). At the end of this paper, key points are analyzed in order to improve energy saving estimates. (author)

Turbine Energy Evaluation by internal dimensional control; Evaluacion energetica de turbinas por control dimensional de internos

Energy Technology Data Exchange (ETDEWEB)

Mediavilla, F. [Tecnatom. Madrid (Spain)

2000-07-01

To maintain the optimum thermal performance in a high level throughout the life of the turbines requires a good testing program, proper analysis of the test data, and a steam path audit during turbine overhauls. If from operating data analysis collected during the performance test before the outage shows that the efficiency of the turbine is coming down, the steam path audit, that is an internal inspection and a dimensional control of the internals, identity and quantity causes of performance degradation like, seal leakages, excessive clearances, solid particle erosion damages, blades deposits and other losses. The steam path audit assigns the heat rate penalties associated with each of these individual losses to the total degradation. This are used to make cost-effective maintenance decisions during the course of the overhaul. After repairs, a closing steam path audit is conducted during the re assembly of the turbine in order to predict return to service condition of the machine and to provide a quality control check on outage repairs. (Author)

Energetic identification of ions of very low fluence; Identificacion energetica de iones de muy baja fluencia

Energy Technology Data Exchange (ETDEWEB)

Mut C, D.A.; Balcazar, M. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

2005-07-01

The calibration of 2 types of plastics is presented (cellulose nitrate and polycarbonate) that detect and identify the energy of helium slight ions (1.5 to 10 MeV) and protons (0.3 to 6 MeV) in flows so low of a single particle /cm{sup 2}. This methodology is of importance in radiological protection to identify the actinides {sup 232} Th, {sup 241} Am, {sup 238} U, {sup 235} U, {sup 237} Np by means of its alpha emissions, or to carry out neutron spectroscopy in an ignored energy field by protons retrocession. The ion identification is adjusted for all the cases to a simple expression of the exponential type. The comparison is achieved among detection efficiencies for the detectors. (Author)

La crisi energetica nel mondo e in Italia da Enrico Fermi ed Edoardo Amaldi a oggi

CERN Document Server

Salvini, Giorgio

2007-01-01

Enrico Fermi e il suo allievo Edoardo Amaldi, grandi padri della Scuola di fisica nucleare italiana, hanno promosso l'impiego pacifico dell'energia nucleare: Fermi con il primo reattore a Chicago nel 1942, Arnaldi con i suoi contributi a tutti gli usi pacifici, dalla medicina alla produzione di energia. L'Italia, però, ha fatto eccessivo ricorso al petrolio, di cui non è produttrice. La ricerca è rimasta molto indietro rispetto a quella degli altri paesi e la politica sta dedicando pochissimi sforzi a questa gravissima situazione. Ragioni economiche, nonché ambientali, esigono ora una revisione e una ricontestualizzazione del problema. Durante un importante Convegno, tenutosi a Roma il 15 e 16 maggio 2007, alcuni tra i più noti ed esperti fisici italiani e stranieri hanno discusso proprio di questo problema. L'intento del volume, che raccoglie gli interventi del Convegno romano, è quello di fornire dati e informazioni che mettano il lettore in condizione di farsi un'idea propria, libera da pregiudizi, s...

PETROBRAS: the race to the energetic self-sufficiency; PETROBRAS: a corrida para a auto-suficiencia energetica

Energy Technology Data Exchange (ETDEWEB)

Silva, O [PETROBRAS, Rio de Janeiro, RJ (Brazil)

1987-10-01

An evaluation of activities of PETROBRAS, during its three decades of existence, its actuation in field of drilling and prospect, its evolution on technology management,integration inter holding industries on petrochemical, fuel distribution and oil refines are discussed. The development of its actuation on offshore oil exploration and economic aspects of the enterprise are debated 8 figs.

Procedure for the energy evaluation of electric motors; Procedimiento para la evaluacion energetica de motores electricos

Energy Technology Data Exchange (ETDEWEB)

Feliz Quiroz, Marco Antonio [Universidad Autonoma Metropolitana (Mexico)

2002-06-01

The present article is not a complete treaty about motors, here it is simply tried to show a practical procedure to evaluate electric motors, in order to determine the economics of their possible replacement by others of high efficiency. With the former in mind, the included database is sustained in the information of a representative number of motors brands commercialized in Mexico, since to include all the brands sold in our country would not be practical and it would be outside the scope of this publication. [Spanish] El presente articulo no es todo un tratado acerca de motores, sencillamente aqui se pretende mostrar un procedimiento practico para evaluar los motores electricos, a fin de determinar la rentabilidad de su eventual reemplazo por otros de alta eficiencia. Por lo anterior, la base de datos incluida se sustente en la informacion de un numero representativo de marcas de motores comercializados en Mexico, ya que abarcar todas las marcas vendidas en nuestro pais no seria practico y quedaria fuera del alcance de esta publicacion.

Non governmental organizations and energy efficiency promotion; O terceiro setor e a promocao da eficiencia energetica

Energy Technology Data Exchange (ETDEWEB)

Aragao Neto, Raymundo Moniz de; Hahn, Andreas Alexandeer [IIEC - International Institute for Energy Conservation, Washington, D.C. (United States)

2004-07-01

The paper presents actions from IIEC - International Institute for Energy Conservation, NGO which mission is to support social and economic transformation of developing countries, based upon efficient use of energy. It shows aspects such as innovation, organizational structure, decision-making process and ongoing and delivered projects in Brazil. The importance of the so-called 'Third Sector' (expression normally used) in Brazil is reinforced in this paper, presenting numbers and the increased importance of NGOs in Brazil, people involved and relevance to the economy. The paper focuses also the behaviour change when people migrate from consulting area to NGO, specially learning new meanings for profit and results. (author)

Comparing nuclear power with other energy sources; Comparacion de la energia nuclear con otras fuentes energeticas

Energy Technology Data Exchange (ETDEWEB)

Rey, Francisco C [Comision Nacional de Energia Atomica, General San Martin (Argentina). Centro Atomico Constituyentes

2001-07-01

The economics of electric generation of nuclear, hydro, oil and gas origin are compared. A similar comparison is also made from the health and environment standpoint for the fossil, nuclear, solar and wind generation. A risk assessment for energies of different origin is outlined and the significance of the greenhouse effect is emphasised. A comprehensive economic and environmental evaluation is recommended for the energy planning.

On the Brazilian energetic situation 1970 - 2030; Sobre a situacao energetica brasileira: de 1970 a 2030

Energy Technology Data Exchange (ETDEWEB)

Lima, Maria Thereza da Silva Lopes; Souza, Marina Correa de; Flores, Tarcisio Santos; Cruz, Nathalia Gracielle da Silva; Diamantino, Hugo Duarte; Barroso, Livia Alves; Rocha, Bruna Almeida; Souza, Romulo Luiz Mendes; Ramos, Pedro Camilo; Macedo, Marcio Henrique Marques [Universidade Federal dos Vales do Jequitinhonha e Mucuri (UFVJM), Diamantina, MG (Brazil). Inst. de Ciencia e Tecnologia

2015-07-01

In this paper we report, first, the Brazilian energy situation from the major oil crisis in the 1970s.Next, we discuss the period from the 1980s until 2005.Finally, it is projected scenarios from recent past (2005-2013), to the future that begins today and runs until 2030.This is a work for educational purposes, in which we provide compiled data for school research in all levels. (author)

Wind power in Mexico: simulation of a wind farm and application of probabilistic safety analysis; La energia del viento en Mexico: Simulacion de un parque eolico y aplicacion de analisis probabilistica de seguridad

Energy Technology Data Exchange (ETDEWEB)

Martin del Campo Marquez, C.; Nelson Edestein, P.F.; Garcia Vazquez, M.A. [Facultad de Ingenieria, Universidad Nacional Autonoma de Mexico (Mexico)]. E-mail: cecilia.martin.del.campo@gmail.com; pnelson_007@yahoo.com; maiki27@yahoo.com

2009-10-15

The most important aspects of wind energy in Mexico, including the potential for generating electricity and the major projects planned are presented here. In particular, the generation costs are compared to those of other energy sources. The results from the simulation of a 100MW wind farm in the Tehuantepec Isthmus are also presented. In addition, the environmental impacts related to the wind farm in the mentioned zone are analyzed. Finally, some benefits of using Probabilistic Safety Analysis are discussed with respect to evaluating the risks associated with events that can occur in wind parks, being especially useful for design and maintenance of the parks and the wind turbines themselves. In particular, an event tree was developed to analyze possible accident sequences that could occur when the wind speed is too great. Also, fault trees were developed for each mitigating system considered, in order to determine the relative importance of the wind generator components to the failure sequences, in order to evaluate the yield of suggested improvements and the optimization of maintenance programs. [Spanish] Se presentan los aspectos mas importantes referentes a la energia eolica en Mexico, su potencial de aprovechamiento y los proyectos planeados. Se comparan sus costos de generacion electrica con los de otras fuentes de energia. Se presentan los resultados de la simulacion con el programa WindPro, de un parque eolico de 100 MW localizado en el Istmo de Tehuantepec. Asimismo, se analizan algunos de los impactos ambientales relacionados con la instalacion de paquetes eolicos en la zona mencionada. Finalmente, se discuten las ventajas que pueden aportar los analisis probabilisticas de seguridad para evaluar los riesgos asociados a eventos que pueden ocurrir en los parques eolicos, sino de los resultados de este analisis de utilidad para el diseno y mantenimiento de los parques y de los propios aerogeneradores. Especificamente se desarrollo un arbol de eventos con el

INCAS residential building energy savings design code: User's guide. INCAS: guida all'uso del codice di calcolo di diagnosi energetica nell'abitazione

Energy Technology Data Exchange (ETDEWEB)

Carderi, A.

1991-01-01

The INCAS residential building energy savings design code comes complete with data banks giving designers all the necessary technical and economic information and energy savings options for the code's efficacious application to obtain the optimum energy efficient/cost beneficial solution. This user's manual contains descriptions of the types of data to be input, the code's methodology, the data banks, and complete instructions for the code's implementation. The energy savings alternatives include: choice of heating plant and fuel; choice, application location and thickness of thermal insulation. For the case of building heating system retrofits, the code takes into account the existing condition of building components.

The management strategy of energetic companies before new businesses: CESP - a case study; A postura empresarial de empresas energeticas diante de novos negocios: CESP - um estudo de caso

Energy Technology Data Exchange (ETDEWEB)

Prado Junior, Fernando Amaral de Almeida

1994-12-01

This thesis focuses the new challenges which the Brazilian electric power companies have been facing towards the new market requirements. Special emphasis is given to: organizational theory; Brazilian electric power industry history; and, comparative analysis of the Brazilian electric power system regulation and legislation. A case study is presented based on the electric power company of Sao Paulo State - Southeast Brazil 60 refs., 21 figs., 37 tabs.

IEA-R1 research reactor: operational life extension and considerations regarding future decommissioning

International Nuclear Information System (INIS)

Frajndlich, Roberto

2009-01-01

The IEA-R1 reactor is a pool type research reactor moderated and cooled by light water and uses graphite and beryllium reflectors. The reactor is located at the Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), in the city of Sao Paulo, Brazil. It is the oldest research reactor in the southern hemisphere and one of the oldest of this kind in the world. The first criticality of the reactor was obtained on September 16, 1957. Given the fact that Brazil does not have yet a definitive radioactive waste repository and a national policy establishing rules for the spent fuel storage, the institutions which operate the research reactors for more than 50 years in the country have searched internal solutions for continued operation. This paper describes the spent fuel assemblies and radioactive waste management process for the IEA-R1 reactor and the refurbishment and modernization program adopted to extend its lifetime. Some considerations about the future decommissioning of the reactor are also discussed which, in my opinion, might help the operating organization to make decisions about financial, legal and technical aspects of the decommissioning procedures in a time frame of 10-15 years(author)

Selection of electric motors for industrial processes with the rational energy use criteria; Seleccion de motores electricos para procesos industriales con criterios de uso racional de la energia

Energy Technology Data Exchange (ETDEWEB)

Morales Collantes, Arturo [Universidad Nacional Autonoma de Mexico, Mexico, D. F. (Mexico)

1993-12-31

Under the energy and ecological crisis we are now going through, but fundamentally because as human beings we can not keep on acting in such a thoughtless way, I write these notes, with the intention that we take more into consideration that whatever we do to improve the ways of energy consumption, will ease the human life preservation. The electric motors selection, plays an important roll in this respect, since it represents the highest percentage of electric energy consumption at national level. Therefore I will point out some basic criteria for an adequate selection. [Espanol] Ante la crisis energetica y ecologica por la que actualmente pasamos, pero fundamentalmente porque como seres humanos no podemos seguir actuando en forma tan irreflexiva, escribo estas notas, con la intencion de que tomemos mas en cuenta, que lo que hagamos para mejorar las formas de consumo de energia, facilitara la preservacion de la vida humana. La seleccion de motores electricos, juega un importante papel al respecto, ya que representa el mayor porcentaje del consumo de energia electrica a nivel nacional, por lo tanto senalare algunos criterios basicos para una adecuada seleccion.

Estimation of the resource and technological prospective of biomass as renewable energy in Mexico (Annexe 2 in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Estimacion del recurso y prospectiva tecnologica de la biomasa como energetico renovable en Mexico (Anexo 2 en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

Energy Technology Data Exchange (ETDEWEB)

Masera, Omar R [Centro de Investigaciones en Ecosistemas, Universidad Nacional Autonoma de Mexico, D.F.(Mexico); Agullon, Javier; Gamino, Benjamin [Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico, D.F.(Mexico)

2005-08-15

The work that next appears is a first effort towards the estimation of the resource and technological prospective of the biomass energy as renewable energy in Mexico. It tries to give an overview considering the present situation of energy plantations, production of alcohol from biomass as well as of the production of agricultural remainders, at worldwide scale as well as in our country. The report includes very general estimations of the of biomass resource, production costs, technological analyses, costs of investment and production of energy and technological prospective to 25 years in each one of the previously mentioned headings. [Spanish] El trabajo que a continuacion se presenta es un primer esfuerzo hacia la estimacion del recurso y prospectiva tecnologica de la biomasa como energetico renovable en Mexico. Pretende dar un panorama general estimando la situacion actual de plantaciones energeticas, de produccion de alcoholes a partir de biomasa asi como de produccion de residuos agricolas, tanto a escala mundial como en nuestro pais. El informe abarca estimaciones muy generales del recurso de biomasa, costos de produccion, analisis tecnologicos, costos de inversion y de produccion de energia y prospectiva tecnologica a 25 anos en cada uno de los rubros mencionados anteriormente.

Theoretical study of bismuth-doped cadmium telluride

Science.gov (United States)

Menendez-Proupin, E.; Rios-Gonzalez, J. A.; Pena, J. L.

Cadmium telluride heavily doped with bismuth has been proposed as an absorber with an intermediate band for solar cells. Increase in the photocurrent has been shown recently, although the overall cell efficiency has not improved. In this work, we study the electronic structure and the formation energies of the defects associated to bismuth impurities. We have performed electronic structure calculations within generalized density functional theory, using the exchange-correlation functional HSE(w) , where the range-separation parameter w has been tuned to reproduce the CdTe bandgap. Improving upon previous reports, we have included the spin-orbit interaction, which modifies the structure of the valence band and the energy levels of bismuth. We have found that interstitial Bi (Bii) tends to occupy Cd vacancies, cadmium substitution (BiCd) creates single donor level, while tellurium substitution (BiTe) is a shallow single acceptor. We investigate the interaction between these point defects and how can they be combined to create a partially filled intermediate band. Supported by FONDECYT Grant 1130437, CONACYT-SENER SUSTENTABILIDAD ENERGETICA/project CeMIE-Sol PY-207450/25 and PY-207450/26. JARG acknowledges CONACYT fellowship for research visit. Powered@NLHPC (ECM-02).

La rappresentazione del sogno, due modelli a confronto: la metapsicologia di Sigmund Freud e la teoria del Codice Multiplo di Wilma Bucci

Directory of Open Access Journals (Sweden)

Ilaria Bellavia

2007-09-01

Full Text Available Obiettivo di questo lavoro è quello di fornire le principali linee di orientamento teorico dell’approccio psicodinamico relative alla funzione del sogno. In tal senso ci si avvarrà della metapsicologia Freudiana, ma anche dei prestigiosi contributi sul carattere del sogno portati da Wilma Bucci. In particolare, si proporrà un parallelismo tra la metapsicologia e la teoria del Codice Multiplo. La teoria energetica di derivazione psicoanalitica mette in risalto alcuni punti cardine sul ruolo del sogno: 1 il sogno deriva dall’energia di un desiderio inconscio; 2 i sogni hanno la funzione di preservare il sonno; 3 la nozione di un censore che si attiva per distorcere e mascherare i contenuti latenti; 4 i contenuti manifesti hanno la funzione di nascondere il reale significato del sogno. Secondo la teoria del codice multiplo, il sogno ha un valore là dove fornisce l’accesso al significato emotivo che è stato dissociato, ma la funzione dell’elaborazione dell’informazione emotiva nel sogno è sovrapponibile a quella dell’elaborazione dell’informazione emotiva durante la veglia, in particolare per quanto riguarda il sonno REM.

A neutron irradiator to perform nuclear activation

International Nuclear Information System (INIS)

Zamboni, C. B.; Zahn, G.S.; Figueredo, A. M. G.; Madi, T. F.; Yoriyaz, H.; Lima, R. B.; Shtejer, K.; Dalaqua Jr, L.

2001-01-01

The development of appropriate nuclear instrumentation to perform neutron activation analyze (NAA), using thermal and fast neutrons, can be useful to investigate materials outside the reactor premises. Considering this fact, a small size neutron irradiator prototype was developed at IPEN facilities (Instituto de Pesquisas Energeticas e Nucleares - Brazil). Basically, this prototype consists of a cylinder of 1200 mm long and 985 mm diameter (filled with paraffin) with two Am-Be sources (600GBq each) arranged in the longitudinal direction of its geometric center. The material to be irradiated is positioned at a radial direction of the cylinder between the two Am-Be sources. The main advantage of this irradiator is a very stable neutron flux eliminating the use of standard material (measure of the induced activity in the sample by comparative method). This way the process became agile, practical and economic, but quantities at mg levels of samples are necessary to achieve good sensitivity, when the material has a low microscopy neutron cross section. As fast and thermal neutron can be used, the flux distribution, for both, were calculated and the prototype performance is discussed

Relational database hybrid model, of high performance and storage capacity for nuclear engineering applications

International Nuclear Information System (INIS)

Gomes Neto, Jose

2008-01-01

The objective of this work is to present the relational database, named FALCAO. It was created and implemented to support the storage of the monitored variables in the IEA-R1 research reactor, located in the Instituto de Pesquisas Energeticas e Nucleares, IPEN/CNEN-SP. The data logical model and its direct influence in the integrity of the provided information are carefully considered. The concepts and steps of normalization and de normalization including the entities and relations involved in the logical model are presented. It is also presented the effects of the model rules in the acquisition, loading and availability of the final information, under the performance concept since the acquisition process loads and provides lots of information in small intervals of time. The SACD application, through its functionalities, presents the information stored in the FALCAO database in a practical and optimized form. The implementation of the FALCAO database occurred successfully and its existence leads to a considerably favorable situation. It is now essential to the routine of the researchers involved, not only due to the substantial improvement of the process but also to the reliability associated to it. (author)

Contribution to optimization of individual doses of workers in shipment of generator technetium-99m

International Nuclear Information System (INIS)

Fonseca, Lizandra Pereira de Souza

2010-01-01

The Instituto de Pesquisas Energeticas e Nucleares, IPEN, radiopharmaceuticals research and produce that are distributed throughout Brazil, currently the radiopharmaceutical with the largest number of packaged shipped per year and with the highest total activity is the 99m technetium generator. To reduce individual doses for workers involved in the production of radiopharmaceuticals was performed a study of radiological protection optimization in the shipment process of technetium generator, using the techniques: differential cost-benefit analysis, integral cost-benefit analysis, multi-attribute utility analysis and multi-criteria outranking analysis. With changes in the configuration of packed for generator dispatch and with the acquirement of a mat transporter it was possible establish 4 protection options. The attributes considered were the protection cost, collective dose, individual dose and physical effort by worker to move the package without the mat. To assess the robustness of analytical solutions found with the techniques used in the optimization we performed a sensitivity study and found that option 3 is more robust than option 1, which is no longer the analytical solution with an increase of R$ 20.000,00 the cost of protection. (author)

Estimation of the resource and technological prospective of biomass as renewable energy in Mexico (Annexe 2 in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Estimacion del recurso y prospectiva tecnologica de la biomasa como energetico renovable en Mexico (Anexo 2 en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

Energy Technology Data Exchange (ETDEWEB)

Masera, Omar R [Centro de Investigaciones en Ecosistemas, Universidad Nacional Autonoma de Mexico, D.F.(Mexico); Agullon, Javier; Gamino, Benjamin [Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico, D.F.(Mexico)

2005-08-15

The work that next appears is a first effort towards the estimation of the resource and technological prospective of the biomass energy as renewable energy in Mexico. It tries to give an overview considering the present situation of energy plantations, production of alcohol from biomass as well as of the production of agricultural remainders, at worldwide scale as well as in our country. The report includes very general estimations of the of biomass resource, production costs, technological analyses, costs of investment and production of energy and technological prospective to 25 years in each one of the previously mentioned headings. [Spanish] El trabajo que a continuacion se presenta es un primer esfuerzo hacia la estimacion del recurso y prospectiva tecnologica de la biomasa como energetico renovable en Mexico. Pretende dar un panorama general estimando la situacion actual de plantaciones energeticas, de produccion de alcoholes a partir de biomasa asi como de produccion de residuos agricolas, tanto a escala mundial como en nuestro pais. El informe abarca estimaciones muy generales del recurso de biomasa, costos de produccion, analisis tecnologicos, costos de inversion y de produccion de energia y prospectiva tecnologica a 25 anos en cada uno de los rubros mencionados anteriormente.

Renewable energies: A real option for the electrical generation in Mexico?; Energias renovables: opcion real para la generacion electrica en Mexico?

Energy Technology Data Exchange (ETDEWEB)

Huacuz V, Jorge M. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2003-07-01

The renewable energies offer additional benefits to the kilowatts (kW) and kilowatts-hour (kWh) that they produce, because they include the creation of new jobs, a cleaner mean of generation and power assurance, among others. In view of this, most of the countries of the Organization for Economic Cooperation and Development (OECD) and several developing nations have established goals for the renewable energies in their power plans. Many of these countries also have fomented the local development of industries of renewable energy and are penetrating aggressively in this new technology market. [Spanish] Las energias renovables ofrecen beneficios adicionales a los kilowatts (kW) y kilowatts-hora (kWh) que producen, pues incluyen la creacion de nuevos empleos, un medio mas limpio de generacion y seguridad energetica, entre otros. En vista de ello, la mayoria de los paises de la Organizacion de Cooperacion para el Desarrollo Economico (OCDE) y varias naciones en desarrollo han establecido metas para las energias renovables en sus planes energeticos. Muchos de estos paises tambien han fomentado el desarrollo local de industrias de energia renovable y estan penetrando agresivamente en este nuevo mercado de la tecnologia.

Selection of electric motors for industrial processes with the rational energy use criteria; Seleccion de motores electricos para procesos industriales con criterios de uso racional de la energia

Energy Technology Data Exchange (ETDEWEB)

Morales Collantes, Arturo [Universidad Nacional Autonoma de Mexico, Mexico, D. F. (Mexico)

1992-12-31

Under the energy and ecological crisis we are now going through, but fundamentally because as human beings we can not keep on acting in such a thoughtless way, I write these notes, with the intention that we take more into consideration that whatever we do to improve the ways of energy consumption, will ease the human life preservation. The electric motors selection, plays an important roll in this respect, since it represents the highest percentage of electric energy consumption at national level. Therefore I will point out some basic criteria for an adequate selection. [Espanol] Ante la crisis energetica y ecologica por la que actualmente pasamos, pero fundamentalmente porque como seres humanos no podemos seguir actuando en forma tan irreflexiva, escribo estas notas, con la intencion de que tomemos mas en cuenta, que lo que hagamos para mejorar las formas de consumo de energia, facilitara la preservacion de la vida humana. La seleccion de motores electricos, juega un importante papel al respecto, ya que representa el mayor porcentaje del consumo de energia electrica a nivel nacional, por lo tanto senalare algunos criterios basicos para una adecuada seleccion.

Demand management by means of substitution energetics in home cooking: Costa Rica's metropolitan area; Gerenciamento da demanda mediante substituicao energetica na coccao residencial: regiao metropolitana da Costa Rica

Energy Technology Data Exchange (ETDEWEB)

Herrera, Alfonso Herrera

1996-07-01

The electric power system management in Costa Rica is analyzed. The possibility of substitution of LPG (Liquefied Petroleum Gas) for electric power, in home cooking, are identified as one of the most important program in order to reduce increasing load peak and energy requirements in electric power system of Costa Rica. The sustain ability of the substitution program stands on the current process of electric power supply. The primary power sources used in generating electric power in rush hours are oil-based; this process is less efficient than directly using LPG for home cooking. Large scale substitution with LPG in home cooking will reduce increasing electric power demand in peak hours, reducing subsidized electricity sales, with better use of combustibles presently imported, improving the country commercial balance and preventing or postponing electric power system expansion investments. Three different perspectives have been considered in evaluating economical effectiveness in substituting power sources: user, utility and society perspectives. Due to subsidized electric power prices, residential users do not enough interest in substituting of LPG for power source; unless LPG cookers are also subsidized. However, positive results for the distribution utility are enough in order to offer these kind of incentives. Explicit treatment of these kind of programs, including the efficiency increment as an available resource for electric power utilities in Costa Rica, will avoid the implantation of most of combustion plants now planned in current National Electric Power Plant expansion program. (author)

Renewable energy at high altitudes; Energia rinnovabile in alta quota

Energy Technology Data Exchange (ETDEWEB)

Beltramo, R.; Cuzzolin, B. [Turin Univ., Turin (Italy). Dipt. di Scienze Merceologiche

2000-12-01

Improving environmental performance by paying greater attention to the environment factor is becoming the prime objective of many companies and organizations in general. But not theirs alone. Even the tourism sector is making a number of efforts in this direction. This is the case, for example, of the Regina Margherita Refuge located on Point Gnifetti on the Monte Rosa massif, where a research project called CRESTA was conducted. This was a study on the feasibility of meeting the refuge's energy sources, that is, by using a photovoltaic or hybrid (wind-based and photovoltaic) energy production system. A plant thus able to exploit the landscape and meteorological characteristics typical of a mountain refuge, saving money and reducing the pollution load. [Italian] Migliorare le proprie performance ambientali prestando maggiore attenzione al fattore ambiente sta diventando il principale obiettivo di molte aziende e organizzazioni in generale. Ma non solo. Anche nel settore del turismo si stanno compiendo numerosi sforzi in questo senso. E' il caso, ad esempio, del Rifugio Regina Margherita, situato sulla punta Gnifetti nel massiccio del Monte Rosa, presso il quale e' stato condotto un progetto di ricerca denominato CRESTA. Si tratta delle realizzazione di uno studio sulla possibilita' di soddisfare il fabbisogno energetico del rifugio attraverso l'utilizzo di fonti energetiche rinnovabili, ossia grazie all'impiego di un sistema di produzione energetica fotovoltaico o ibrido (eolico o fotovoltaico). Un impianto, quindi, in grado di sfruttare le caratteristiche paesaggistiche e meteorologiche tipiche di un rifugio di montagna, con un risparmio dei costi e una riduzione del carico inquinante.

Design and energetical feasibility study of a refrigerated trailer with photovoltaic solar energy; Diseno y estudio de viabilidad energetica de un trailer refrigerado mediante energia solar fotovoltaica

Energy Technology Data Exchange (ETDEWEB)

Callen, S.; Ibanez, M.; Cabeza, L. F.

2004-07-01

In this study we have tried to show the energetic viability and the design of a refrigerated trailer, in which it has changed the traditional oil generator from the refrigeration system to a photovoltaic generator. Due to restrictions of design limited by trailer dimensions and the horizontal positions of modules, as one of the first conclusion has been necessary to reduce the refrigeration charge, to obtain the necessary energy savings to have technical viability of the project. The propositions to get the energy savings are to improve the thermal insulation of the trailer and to limit the kind and amount of products to transport. Finally, to apply the technology of solar refrigeration in the cooling unit of the trailer to optimise its performance. (Author)

Retrospective of CO{sub 2} emissions of the Mexican industrial sector; Retrospectiva de emisiones de CO{sub 2} del sector industrial mexicano

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, Domingo; Martinez, Manuel [Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D.F. (Mexico)

2006-11-15

emisiones de CO{sub 2} aumentaron 230%. Las ramas industriales que han mostrado cambios significativos en la emision de CO{sub 2} son Construccion, Aguas envasadas, Hule, Cemento, Cerveza y malta y Quimica. Para evaluar los efectos de la Actividad, Estructura, Intensidad Energetica, Mezcla de combustibles de uso final y Mezcla de combustibles empleados en la generacion de electricidad se utiliza el modelo de descomposicion de CO{sub 2} fundamentado en el indice de Laspeyres. Los efectos calculados muestran que el principal aumento de bioxido de carbono total del SIM es referido a la Actividad con una tasa media de crecimiento anual (TMCA) de 4.32%; mientras que el efecto que mitiga mas la emision de CO{sub 2} es el descrito por la Intensidad energetica y equivale a una TMCA de -0.85%.

Optimization of the architecture of a neural network in neutron spectrometry to reduce the number of Bonner spheres; Optimizacion de la arquitectura de una red neuronal en espectrometria de neutrones para reducer el numero de esferas Bonner

Energy Technology Data Exchange (ETDEWEB)

Leon P, A. A.; Martinez B, M. R.; Hernandez P, C. F.; Espinoza G, J. G.; Castaneda M, V. H.; Solis S, L. O.; Castaneda M, R.; Ortiz R, J. M.; Vega C, H. R. [Universidad Autonoma de Zacatecas, Av. Ramon Lopez Velarde 801, Col. Centro, 98000 Zacatecas, Zac. (Mexico); Mendez V, R. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas, Laboratorio de Patrones Neutronicos, Av. Complutense 22, 28040 Madrid (Spain); Gallego, E. [Universidad Politecnica de Madrid, Departamento de Ingenieria Nuclear, ETSI Industriales, Jose Gutierrez Abascal 2, 28006 Madrid (Spain); De Sousa L, M. A. [Centro de Desenvolvimento da Tecnologia Nuclear / CNEN, Av. Pte. Antonio Carlos 6627, 31270-901 Pampulha, Belo Horizonte, Minas Gerais (Brazil)

2016-10-15

The neutron spectrometry is an experimental process for determining the energy distribution called the Spectrum. Among the methods available for neutron spectrometry, one can mention the Bonner Sphere Spectrometric System as one of the most used, consisting of a detector placed in the center of a set of polyethylene spheres whose diameters range from 2 to 18 inches, however has some disadvantages such as the long periods of time to perform the measurements, the weight and the spheres number that vary according to the system. From this, alternative methods such as artificial neural networks are proposed. For this project neural networks of reverse propagation were used with the methodology of robust design of artificial neural networks, with the aid of a computational tool that maximizes the performance, making the time used for the training s of the network is the smallest possible and thus gets the orthogonal fixes quickly to determine the best network topology. The counting rates of a spectrometric system with 7 spheres, 2 spheres and one sphere of 5 and 8 inches were used. This methodology seeks to reduce the work used as in the spectrometric system formed by a greater number of spheres, since to enter less data in the counting rates to obtain the spectra with 60 energy levels saves time and space, because at having a smaller number of spheres its portability is easier to move from one place to another, for this we performed several experiments with different errors until we reached the optimal error so that the topology of the network was appropriate and find the best design parameters. A statistical software JMP was also used to obtain the best topologies and thus to retrain obtaining its best and worst spectra, in order to determine if the reduction is possible. (Author)

Energy operation optimization of Rio Paranapanema power plants; Otimizacao da operacao energetica das usinas do Rio Paranapanema

Energy Technology Data Exchange (ETDEWEB)

Soares Filho, Secundino; Cicogna, Marcelo Augusto [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Eletrica e Computacao; Carneiro, Adriano Alber de Franca Mendes; Silva Filho, Donato da [Sao Paulo Univ., Sao Carlos, SP (Brazil). Escola de Engenharia; Lopes, Joao Eduardo Goncalves [Sao Paulo Univ., SP (Brazil). Escola Politecnica; Born, Paulo Henrique S.; Chaves, Jose Roberto de A.; Laudanna, Paulo Ricardo [Duke Energy International Geracao Paranapanema, PR (Brazil)

2000-07-01

This work presents the developed nonlinear optimization model and verify the results for the hydroelectric power plants cascade on the Paranapanema river. The power plants optimized operation is checked out under the average hydrological conditions and the represented by the known flow history ones.

Economic aspects for South America energy integration; Aspectos economicos para a integracao energetica da America do Sul

Energy Technology Data Exchange (ETDEWEB)

Vela, Jorge Alberto Alcala; Cardozo, Fernando Simoes [ELETROBRAS, Rio de Janeiro, RJ (Brazil)

2008-07-01

Expansion of the internal market and external, production on a large scale and more dynamic economic growth would be the consequences of a regional integration in South America. However, due to the specific characteristics of South America this process did not occur. Many attempts were made through the years with the creation of institutions that tried to promote the integration of different forms of South America. This article analyses the current economic conditions in which this initiative is to achieve an energy integration, which seems feasible given the provision expresses the presidents of South American countries before a possible rationing of energy. Through analysis of the results it may be concluded that there is a growing demand for energy in all countries, which should be resolved first in order not to cut the development of South America. The main economic aspects which affect the process of integrating energy are the commercial structures of energy, the energy complementarities, the degree of development of infrastructure for interconnection, the industrial structure and conformation electric business. However, an immediate solution would be to boost bilateral integration energy projects and construction of transmission lines that interconnect the regional stations for the supply of electric energy. Moreover, as the conditions are not improved political and economic and there is no compatible models between technical institutions and legal and administrative, will not be achieved significant progress in the process of regional energy integration of South America. (author)

Geothermal resources of low enthalpy as an energy alternative; Recursos geotermicos de baixa entalpia como alternativa energetica

Energy Technology Data Exchange (ETDEWEB)

Mattos, Marieta C [Ministerio das Minas e Energia, Sao Paulo, SP (Brazil); Frangipani, Alcides; Furumoto, Shintaro [Instituto de Pesquisas Tecnologicas (IPT), Sao Paulo, SP (Brazil)

1985-12-31

In this work an preliminary economic analysis is carried out to show the advantage of using geothermal fluids as a substitute for heating. Specific cases for potential and immediate use of geothermal fluids as a substitute for heating oil industrial process heating. Specific cases for potential and immediate use of geothermal fluids in Brazil are analysed. These include geothermal refrigeration, agroindustrial uses, tourism and therapeutic purposes. 7 refs., 2 tabs

Hydrogen and fuel cells: security and energy sustainability; Hidrogeno y pilas de combustible: seguridad y sostenibilidad energetica

Energy Technology Data Exchange (ETDEWEB)

Brey Sanchez, J. J.

2012-11-01

As fuel, hydrogen burns, burn like gasoline or natural gas, but with the difference that the only emission is water vapor produced without the presence of carbon dioxide. So, this is a clean fuel when its use. However, while the coal, oil or natural gas is found in nature, hydrogen must be produced from a primary energy source: it is said to be a energy vector. (Author)

Technology for manufacturing dispersion nuclear fuel at Instituto de Pesquisas Energeticas e Nucleares IPEN/CNEN-SP, Brazil

International Nuclear Information System (INIS)

Durazzo, M.; Carvalho, E.F. Urano de; Saliba-Silva, A.M.; Souza, J.A.B.; Riella, H.G.

2008-01-01

IPEN has been working for increasing radioisotope production in order to supply the expanding demand for radiopharmaceutical medicines requested by the Brazilian welfare. To reach this objective, the IEA-R1 research reactor power capacity was recently increased from 2 MW to 3.5 MW. Since 1988 IPEN has been manufacturing its own fuel element, initially based on U 3 O 8 -Al dispersion fuel plates with 2.3 g U/cm 3 . To support the reactor power increase, higher uranium density had to be achieved for better irradiation flux and also to minimize the irradiated fuel elements to be stored. Uranium silicide was the chosen option. This paper describes the results of this program and the current status of silicide fuel fabrication and qualification. (author)

Potential of energetic utilization of grains residual biomass; Potencial de utilizacao energetica de biomassa residual de graos

Energy Technology Data Exchange (ETDEWEB)

Mourad, Anna L. [Instituto de Tecnologia de Alimentos (ITAL), Campinas, SP (Brazil). Centro de Tecnologia de Embalagem], e-mail: anna@ital.sp.gov.br; Ambrogi, Vinicius S.; Guerra, Sinclair M.G. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica], e-mail: ambrogi@fem.unicamp.br, e-mail: sguerra@fem.unicamp.br

2004-07-01

The biomass resulting from the rejected parts of grains, as straw and peel of rice, corn, wheat, soy, all great cultivations in the country, has potential to be takes advantage as energy. It was considered that the contribution of this residual biomass is near of 167,8 million GJ/year, value that could be added to the use already established of the cane bagasse for energy purpose (658 million GJ, in 2001). This energy can be used for drying of these same grains (energy expense estimate of 67 million GJ), currently obtained from oil. It can also substitute the fuel oil used in the agricultural section, in the industries of food and beverage, ceramic and textile (sections that consumed 67.822 GJ in 2001). In Sao Paulo state the regions with greater potential to install biomass plants are located in Assis, Avare and Itapeva EDR (regional development office). (author)

Energy efficiency policies and climatic change in Brazil; Politicas de eficiencia energetica e mudancas climaticas no Brasil

Energy Technology Data Exchange (ETDEWEB)

Romeiro, Viviane [Universidade de Sao Paulo (IEE/USP), SP (Brazil). Inst. de Eletrotecnica e Energia], email: viviromeiro@usp.br; Barros, Regiane Silva de [Universidade Estadual de Campinas (FEM/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica. Planejamento de Sistemas Energeticos], email: rsbarros@fem.unicamp.br; Simoes, Andre Felipe [Universidade de Sao Paulo (FEM/USP), SP (Brazil). Fac. de Engenharia Mecanica], email: afsimoes@fem.unicamp.br

2010-07-01

The rational use of energy, associated with economic development improvement, represents one of the most challenges in the energy planning context. Although the Clean Development Mechanism - CDM has got a relative success by reducing Greenhouse Gases Emissions- GGE, energy efficiency has not been considered yet as a strategic measure for significant investments. This work assumes that an inclusion of programmatic mechanisms, politics and a more comprehensive regulation tools could represent a potential to maximize energy efficiency actions. Methodologically, it was made a bibliographic review from an analytical perspective of energy efficiency politics and specially in the context of the carbon market framework. As a result, it was observed that energy efficiency actions has been gradually inserted in a more comprehensive and programmatic structure attributing more interference from the public sector instead of the private sector (which has been presenting many limitations). (author)

Energy demand in an isolated community: Arixi/AM, Brazil; Demandas energeticas de uma comunidade isolada - Arixi/AM

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Elen Jane de Abreu; Barbosa, Sonia Regina da Cal Seixas [Universidade Estadual de Campinas (FEM/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica. Programa de Pos-Graduacao em Planejamento de Sistemas Energeticos], e-mail: srcal@unicamp.br

2006-07-01

Isolated energy communities in the Amazon are known by not being integrated to the rest of the net country of generation and distribution of electric energy. Therefore, federal government proposes an equal electric energy distribution for everyone in the country in order to bring social and economic development, mainly to the isolated energy communities. In this context, the isolated Arixi community, a small village in the Amazon, is focus of the project 'Alternative Production Energy from Cell Fuel and Natural Gas in the Amazon State - CELCOMB', a partnership between Federal Amazon University and State University of Campinas, which has the objective of producing alternative energy from cell fuel and natural gas. The objective of this article is to analyze the energy aspects of the isolated community of Arixi in the Amazon, and also get to know its energy demand. To do so, this article is based on a master dissertation and also in community field research. So, despite of the fact that this article is part of a larger project, by analyzing energy data and nowadays demands of the community, we will be able to examine what are the real electric energy requirements of an isolated community in the Amazon. (author)

Energy intensities in Mato Grosso state and in meso-regions; Intensidades energeticas nas mesorregioes de Mato Grosso

Energy Technology Data Exchange (ETDEWEB)

Canavarros, Otacilio Borges; Melo, Moises Candido de; Dorileo, Ivo Leandro [Universidade Federal de Mato Grosso (UFMT), Cuiaba, MT (Brazil). Nucleo Interdisciplinar de Estudos em Planejamento Energetico (NIEPE)

2004-07-01

This work presents some energetic intensities in Mato Grosso state and in each of its five meso-regions that are in the document produced in 2002 by the NIPE/UFMT (Nucleo Interdisciplinar de Estudos em Planejamento Energetico of the Universidade Federal do Mato Grosso) entitled: 'Energetic Balance of the Mato Grosso and meso-regions: period 1995-2001'. (author)

Measurement and verification of a energy optimization project; Medicao e verificacao de um projeto de otimizacao energetica

Energy Technology Data Exchange (ETDEWEB)

Haddad, Jamil; Yamachita, Roberto Akira; Guardia, Eduardo Crestana [Universidade Federal de Itajuba (UNIFEI), MG (Brazil). Centro de Excelencia em Eficiencia Energetica; Cruz, Paulo de Tarso de Alexandria; Porto, Laura Cristina da Fonseca; Leonelli, Paulo Augusto [Ministerio de Minas e Energia (MME), Brasilia, DF (Brazil)

2008-07-01

This article presents the results obtained with the execution of a service of energy diagnosis, project and execution of energy modernization of the Municipal Market. During the execution of this project measurements were accomplished before and after the end of the works, this measurement process had as objective the verification of the energy earnings. This project had its beginning in January of 2007 and the end in February of 2008. With the implementation of this project it was obtained a reduction in the electric power consumption, and also, it provided larger safety to the electric operation and the public visitor of the market. This project was accomplished in partnership with the Ministry of Mines and Energy - MME, and it was the first action of practical stamp of the Center of Excellency in Energy Efficiency - EXCEN, of the Federal University of Itajuba - UNIFEI, inaugurated in December of 2006, which has as objective disseminates information on the theme energy efficiency through training, development of researches, projects and methodologies. (author)

The economic crisis and the energy efficiency programs; A crise economica e os programas de eficiencia energetica

Energy Technology Data Exchange (ETDEWEB)

Naturesa, Jim Silva; Mariotoni, Carlos Alberto [Universidade Estadual de Campinas (GPESE/FEC/UNICAMP), SP (Brazil). Fac. de Engenharia Civil, Arquitetura e Urbanismo. Grupo de Planejamento Energetico e Sistemas Eletricos; Gomes, Marcio H. de Avelar [Universidade de Brasilia (UnB), Gama, DF (Brazil)

2010-07-01

This paper presents some data from the Brazilian economy (2009 and 2010) and their impact on energy efficiency programs. It is also shown the main results of the National Electricity Conservation Program (PROCEL) and PROCEL INFO, which aims to gather and make available information on the rational and efficient use of energy. At the end, we present information showing that MSMEs (Micro, Small and Medium Companies) should be the main focus of the technological innovation programs aimed to energy efficiency. (author)

Status and possibilities for biomedical applications at the Instituto de Pesquisas Energeticas e Nucleares/Sao Paulo-Brazil

International Nuclear Information System (INIS)

Mastro, N.L. del.

1989-02-01

Radiation applications in the area of biological sciences at our institution aim in the first place at the preservation and improvement of health through the development of research directed to diagnosis and therapeutics. The multiple aspects of biotechnology turn possible also classical and new applications of great importance for the community. The biomedical radiation applications performed particularly at the IPEN are summarized. (author) [pt

Energetic efficiency of agroecosystems as an indicator of sustainability; Eficiencia energetica de agroecossistemas como indicador de sustentabilidade

Energy Technology Data Exchange (ETDEWEB)

Bueno, Osmar de Carvalho [Universidade Estadual Paulista Julio de Mesquita Filho (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas; Colen, Fernando [Universidade Federal de Minas Gerais (ICA/UFMG), Montes Claros, MG (Brazil). Inst. de Ciencias Agrarias; Campos, Alessandro Torres [Universidade Federal de Lavras (DEG/UFLA), MG (Brazil). Dept. de Engenharia

2010-07-01

The dependence of modern agriculture in relation to non-renewable energy sources became more pronounced over time. The intensive use of non-renewable energy in agroecosystems, especially fossil fuels, increased the physical output of food and raw materials, reducing the painfulness of work and the improvement of income in the sector. However, complex problems brought individually or in jail, which transformed human life in terms of ecological, social and economic development. It should build indexes in order to relate the inputs and outputs of energy in ecosystems. A breakthrough in the relationship between sustainability and energy analysis of farms is the use of energy efficiency index, the relationship between outputs and inputs of non-renewable energy in agroecosystems. This paper aims to present the energy efficiency of different agroecosystems. The results demonstrate the dependence of agroecosystems in relation to fossil energy sources. It was concluded that it is necessary to make efficient use of exhaustible natural resources, particularly fossil fuels. (author)

Energetic efficiency in schools. Case study from Itabira; Eficiencia energetica em escolas. Estudo de caso de Itabira

Energy Technology Data Exchange (ETDEWEB)

Souza, Anadia Patricia Almeida de [Prefeitura Municipal de Itabira, MG (Brazil)]. E-mail: anadiaalmeida@gmail.com

2006-07-01

This work approaches the use of energy in public buildings in the sector of Schools in Itabira, Minas Gerais, under the approach of the energy efficiency. It is known that the Brazilian public buildings consumes 80% of all electric energy spend in the public sector. Thus, the public building present important consumptions and great potentials of save energy. An analysis of the public schools of Itabira (municipal and state) with relation to the energy consumption is presented, with the objective to trace an energy profile of the category of Public Schools and to identify energy performance indices (specific consumption) more representative for the sector. In the case of schools, it can be used some amounts as reference for the calculation of specific consumption, to know: worked area, days, number of students, number of turns, number of rooms and number of classrooms, beyond the area. Each one of these amounts of reference supplies a differentiated vision of the energy use. The use of more than an index of energy performance is common so that the information can be extracted. To carry through this study, the consumption of all the year of 2004, the number of period of learning days, the number of students, groups, turn and classrooms was considered. The work presents an analysis of the specific consumptions for each type of considered amount, each type of net (municipal and state) and for an only net (public). The characteristics that justify the differentiated use of the energy, as well as the properties of the used indices are argued to classify them. (author)

Energy saving with speed variators; Ahorro de energia con variadores de velocidad

Energy Technology Data Exchange (ETDEWEB)

Dolores Anguiano, Ramses; Dolores Vazquez, Raul [Cementos Cruz Azul, Hidalgo (Mexico)

2005-07-01

The cement plant Cruz Azul S.C.L. is located in the center of the Mexican republic at 70 km north of the capital. Nowadays the Direction of Cementos Cruz Azul has implemented measures allowing to reduce their production costs. The optimization department found a great area of opportunity at the ventilators of the plant. The ventilators are used in different stages of the process and their flow was normally controlled by means of dampers -due to the high costs of the initial investment and that of maintenance of the speed variation technology which in its majority used direct current equipments. In this case it existed the possibility of making a successful application in two large ventilators, with motors of 1000 HP fed in medium tension (4160 v) in our calcination unit Num. 8. This document shows the development of this project from its initial analysis to its application and results. [Spanish] La planta de cemento Cruz Azul S.C.L. se encuentra localizada en el centro de la republica mexicana a 70 Km al norte de la capital. En estos momentos la direccion de cementos Cruz Azul ha implementado medidas que permitan reducir sus costos de produccion. El departamento de optimizacion encontro una gran area de oportunidad en los ventiladores de la planta. Los ventiladores son utilizados en distintas etapas del proceso y normalmente su flujo era controlado por medio de mamparas, debido a los altos costos como inversion inicial y de mantenimiento de la tecnologia de variacion de velocidad que en su mayoria utilizaba equipos de corriente directa. Para nuestro caso existia la posibilidad de realizar una aplicacion exitosa en dos ventiladores grandes, con motores de 1000 HP alimentados en media tension (4160 v), en nuestra unidad de calcinacion Num. 8. Este documento muestra el desarrollo de este proyecto desde su analisis inicial hasta su aplicacion y resultados.

MGE2: A framework for cradle-to-cradle design

Directory of Open Access Journals (Sweden)

María-Estela Peralta-Álvarez

2015-01-01

Full Text Available El diseño y la ecología son temas cruciales en el sector industrial. Los productos están sometidos a revisiones constantes para sobrevivir en el mercado y a optimizaciones que los mantienen bajo los límites de impacto sobre el planeta. Las decisiones acerca de un nuevo producto afectan su ciclo de vida, los consumidores, y sobre todo el medio ambiente. Con el fin de lograr soluciones de calidad, Eco - eficacia debe considerarse, por lo tanto, en el diseño de un proceso, su desarrollo de productos y el sistema asociado. Una metodología ordenada es esencial para ayudar a la creación de productos que satisfagan tanto las necesidades de los usuarios y los requisitos medioambientales actuales, bajo los paradigmas que crean valor ambiental. Hasta la fecha, la industria ha desarrollado técnicas en un intento de abordar estas expectativas bajo la cuna a la cuna (C2C, que está vagamente estructurada alrededor de los marcos conceptuales y técnicas de diseño. El presente trabajo describe un nuevo marco que abarca todas las etapas de diseño, y permite la interacción bajo un conjunto de principios desarrollados por C2C. En virtud de este nuevo e innovador paradigma surge el Modelo de Genómica de Ecoinnovación y el diseño ecológico, propuesto como una metodología para el diseño de productos que satisfagan las necesidades individuales y colectivas, y que permite el diseño de productos respetuosos del medio ambiente, mediante su integración en el marco de las normas ISO de Análisis de Ciclo de vida (ACV, el ecodiseño, ecoetiquetado y la certificación C2C.

Cross-layer designs for energy efficient wireless body area networks: a review

Directory of Open Access Journals (Sweden)

Juan Camilo Correa-Chica

2016-01-01

Full Text Available El diseño de capa cruzada se considera una poderosa alternativa para dar solución a las complejidades introducidas por las comunicaciones inalámbricas en redes de área corporal (WBAN, donde el modelo clásico de comunicaciones no ha exhibido un desempeño adecuado. Respecto al problema puntual de consumo de energía, hemos preparado la presente revisión de las publicaciones más relevantes que tratan la eficiencia energética para WBAN usando diseño de capa cruzada. En este artículo se proporciona una revisión exhaustiva de los avances en aproximaciones, protocolos y optimizaciones de capa cruzada cuyo objetivo es incrementar el tiempo de vida de las redes WBAN mediante el ahorro de energía. Luego, se discute los aspectos relevantes y deficiencias de las técnicas de capa cruzada energéticamente eficientes. Además, se introducen aspectos de investigación abiertos y retos en el diseño de capa cruzada para WBAN. En esta revisión proponemos una taxonomía de las aproximaciones de capa cruzada, de modo que las técnicas revisadas se ajustan en categorías de acuerdo a los protocolos involucrados en el diseño. Una clasificación novedosa se incluye para hacer claridad en los conceptos teóricos involucrados en cada esquema de capa cruzada y para luego agrupar aproximaciones similares evidenciando las diferencias con otras técnicas entre sí. Nuestras conclusiones consideran los aspectos de movilidad y modelamiento del canal en escenarios de WBAN como las direcciones para futura investigación en WBAN y en aplicaciones de telemedicina.