WorldWideScience

Sample records for system programs overview

  1. Radioisotope Power Systems Program: A Program Overview

    Science.gov (United States)

    Hamley, John A.

    2016-01-01

    NASA's Radioisotope Power Systems (RPS) Program continues to plan, mature research in energy conversion, and partners with the Department of Energy (DOE) to make RPS ready and available to support the exploration of the solar system in environments where the use of conventional solar or chemical power generation is impractical or impossible to meet potential future mission needs. Recent programs responsibilities include providing investment recommendations to NASA stakeholders on emerging thermoelectric and Stirling energy conversion technologies and insight on NASA investments at DOE in readying a generator for the Mars 2020 mission. This presentation provides an overview of the RPS Program content and status and the approach used to maintain the readiness of RPS to support potential future NASA missions.

  2. Program overview

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    The program overview describes the following resources and facilities; laser facilities, main laser room, target room, energy storage, laboratory area, building support systems, general plant project, and the new trailer complex

  3. Data systems and computer science programs: Overview

    Science.gov (United States)

    Smith, Paul H.; Hunter, Paul

    1991-01-01

    An external review of the Integrated Technology Plan for the Civil Space Program is presented. The topics are presented in viewgraph form and include the following: onboard memory and storage technology; advanced flight computers; special purpose flight processors; onboard networking and testbeds; information archive, access, and retrieval; visualization; neural networks; software engineering; and flight control and operations.

  4. Graphic overview system for DOE's effluent and environmental monitoring programs

    International Nuclear Information System (INIS)

    Burson, Z.G.; Elle, D.R.

    1980-03-01

    The Graphic Overview System is a compilation of photos, maps, overlays, and summary information of environmental programs and related data for each DOE site. The information consists of liquid and airborne effluent release points, on-site storage locations, monitoring locations, aerial survey results, population distributions, wind roses, and other related information. The relationships of different environmental programs are visualized through the use of colored overlays. Trends in monitoring data, effluent releases, and on-site storage data are also provided as a corollary to the graphic display of monitoring and release points. The results provide a working tool with which DOE management (headquarters and field offices) can place in proper perspective key aspects of all environmental programs and related data, and the resulting public impact of each DOE site

  5. Program overview

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    The current status and future plans for gas and glass laser research are described. Some special systems studies described are: (1) power production with laser fusion, (2) laser engineering research facility, and (3) laser isotope separation. (U.S.)

  6. DoD Systems Engineering Major Program Support Overview

    Science.gov (United States)

    2012-01-01

    These MRL assessments will be conducted IAW Manufacturing Readiness Level Deskbook, 20 July 2010, prepared for DDR &E by OSD Manufacturing...Technology Program. Reliability & Maintainability Supportability IPT N/A RAM Program Plan (RPP) In RFP CDRL JAGM System will have sufficient Built in Test

  7. Vehicle Technologies Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2006-09-05

    Overview of the Vehicle Technologies Program including external assessment and market view; internal assessment, program history and progress; program justification and federal role; program vision, mission, approach, strategic goals, outputs, and outcomes; and performance goals.

  8. Human Reliability Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    Bodin, Michael

    2012-09-25

    This presentation covers the high points of the Human Reliability Program, including certification/decertification, critical positions, due process, organizational structure, program components, personnel security, an overview of the US DOE reliability program, retirees and academia, and security program integration.

  9. Overview of the EPA quality system for environmental programs

    International Nuclear Information System (INIS)

    Johnson, G.L.

    1993-01-01

    Formalized quality assurance program requirements for the U.S. Environmental Protection Agency (EPA) have been established for more than a decade. During this period, the environmental issues and concerns addressed by the EPA have changed. Many issues, such as ozone depletion and global climate warming, have become international concerns among the world environmental community. Other issues, such as hazardous waste cleanup and clean air, remain a focus of national environmental concerns. As the environmental issues of the 1980's evolved, the traditional quality assurance (QA) program was transformed through the use of quality management principles into a Quality System to help managers meet the needs of the 1990's and beyond

  10. Overview of the Intelligent Manufacturing Systems (IMS) Program

    Energy Technology Data Exchange (ETDEWEB)

    Martel, A. [Canadian IMS Secretraiat, Ottawa, (Canada); Adjemian, A. [European Commission, DG-RTD, Brussels (Belgium)

    2001-07-01

    According to its proponents, the Intelligent Manufacturing System is a highly efficient, global production system, designed as the first decisive step in ensuring that society will continue to flourish materially and spiritually. It is the gateway to advanced manufacturing and processing technologies, represented by a project-based, industry-led, government-endorsed program of cooperative research, carried out in seven industrially advanced regions of the world (Australia, Canada, Europe, Japan, Switzerland, USA, Korea). Currently, there are projects worth about $250 million in progress involving 200+ companies and 200+ research institutions. The benefits of IMS sponsorship, and the type of projects carried on as part of the program (e.g. projects dealing with total product life cycle issues, process issues, strategy/planning /design tools, human/organisation/social issues, virtual/extended enterprise issues) are discussed.

  11. Overview of the aerial radiological measuring system (ARMS) program

    International Nuclear Information System (INIS)

    Deal, L.J.; Doyle, J.F. III.

    1975-01-01

    Since 1960 EG and G, Inc. has developed and maintained for the U.S. Energy Research and Development Administration (ERDA) a state-of-the-art radiation surveillance program called the Aerial Radiological Measuring System (ARMS). Radiological surveys covering more than 300,000 square miles have been performed. In addition to the radiation detector gear, the system includes an inertial navigation system, radar altimeter, meteorological probes, air sampler, air sample analyzer, multispectral cameras, aerial mapping camera and infrared scanner. The recently improved data acquisition system, REDAR, records all inputs digitally on magnetic tape and is readily mounted in fixed-wing aircraft or helicopters. The data analysis system, REDAC, is mounted in a mobile processing laboratory which accompanies the aircraft on surveys. Radiation isopleth maps, both for gross counts and selected isotopes, can be prepared in the field. Special computer software enables the ARMS to detect changes of less than 1.0 μR/hr in exposure rates between successive surveys of a given site

  12. NASA's Radioisotope Power Systems Program Overview - A Focus on RPS Users

    Science.gov (United States)

    Hamley, John A.; McCallum, Peter W.; Sandifer, Carl E., II; Sutliff, Thomas J.; Zakrajsek, June F.

    2016-01-01

    The goal of NASA's Radioisotope Power Systems (RPS) Program is to make RPS ready and available to support the exploration of the solar system in environments where the use of conventional solar or chemical power generation is impractical or impossible to meet potential future mission needs. To meet this goal, the RPS Program manages investments in RPS technologies and RPS system development, working closely with the Department of Energy. This paper provides an overview of the RPS Program content and status, its collaborations with potential RPS users, and the approach employed to maintain the readiness of RPS to support future NASA mission concepts.

  13. BMDO photovoltaics program overview

    Science.gov (United States)

    Caveny, Leonard H.; Allen, Douglas M.

    1994-01-01

    This is an overview of the Ballistic Missile Defense Organization (BMDO) Photovoltaic Program. Areas discussed are: (1) BMDO advanced Solar Array program; (2) Brilliant Eyes type satellites; (3) Electric propulsion; (4) Contractor Solar arrays; (5) Iofee Concentrator and Cell development; (6) Entech linear mini-dome concentrator; and (7) Flight test update/plans.

  14. LANL HED Programs Overview

    Energy Technology Data Exchange (ETDEWEB)

    Flippo, Kirk Adler [Los Alamos National Laboratory

    2015-04-23

    The Powerpoint presentation provides an overview of High-Energy Density (HED) Physis, ICF and Burning Plasma research programs at Los Alamos National Lab. in New Mexico. Work in nuclear diagnostics is also presented, along with a summary of collaborations and upcoming projects.

  15. 1996 ICF program overview

    International Nuclear Information System (INIS)

    Correll, D

    1996-01-01

    The continuing objective of the Inertial Confinement Fusion (ICF) Program is the demonstration of thermonuclear fusion ignition and energy gain in the laboratory. The underlying theme of all ICF activities as a science research and development program is the Department of Energy's (DOE's) Defense Programs (DP) science-based Stockpile Stewardship and Management (SSM) Program. The extension of current program research capabilities in the National Ignition Facility (NIF) is necessary for the ICF Program to satisfy its stewardship responsibilities. ICF resources (people and facilities) are increasingly being redirected in support of the performance, schedule, and cost goals of the NIF. One of the more important aspects of ICF research is the national nature of the program. Lawrence Livermore National Laboratory's (LLNL's) ICF Program falls within DOE's national ICF Program, which includes the Nova and Beamlet laser facilities at LLNL and the OMEGA, Nike, and Trident laser facilities at the University of Rochester (Laboratory for Laser Energetics, UR/LLE), the Naval Research Laboratory (NRL), and Los Alamos National Laboratory (LANL), respectively. The Particle Beam Fusion Accelerator (PBFA) and Saturn pulsed-power facilities are at Sandia National Laboratories (SNL). General Atomics, Inc. (GA) develops and provides many of the targets for the above experimental facilities. LLNL's ICF Program supports activities in two major interrelated areas: (1) target physics and technology (experimental, theoretical, and computational research); and (2) laser science and optics technology development. Experiments on LLNL's Nova laser primarily support ignition and weapons physics research. Experiments on LLNL's Beamlet laser support laser science and optics technology development. In addition, ICF sciences and technologies, developed as part of the DP mission goals, continue to support additional DOE objectives. These objectives are (1) to achieve diversity in energy sources

  16. Overview of the Project Prometheus Program

    Science.gov (United States)

    Burdick, G. M.

    2003-01-01

    This presentation will give an overview of the Project Prometheus Program (PPP, formerly the Nuclear Systems Initiative, NSI) and the Jupiter Icy Moons Orbiter (JIMO) Project (a component of PPP), a mission to the three icy Galilean moons of Jupiter.

  17. Photovoltaic energy program overview: Fiscal year 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This is the 1994 overview for the Photovoltaic Energy Program. The topics of this overview include cooperative research projects to improve PV systems and develop pre-commercial prototypes of new PV products, expanding understanding of the fundamental mechanisms governing the formation and performance of PV materials, and helping US industry enhance its leadership position in the PV market.

  18. Laser fusion program overview

    International Nuclear Information System (INIS)

    Emmett, J.L.

    1977-01-01

    This program is structured to proceed through a series of well defined fusion milestones to proof of the scientific feasibility, of laser fusion with the Shiva Nova system. Concurrently, those key technical areas, such as advanced lasers, which are required to progress beyond proof of feasibility, are being studied. We have identified and quantified the opportunities and key technical issues in military applications, such as weapons effects simulations, and in civilian applications, such as central-station electric power production. We summarize the current status and future plans for the laser fusion program at LLL, emphasizing the civilian applications of laser fusion

  19. Wind energy program overview

    International Nuclear Information System (INIS)

    1992-02-01

    This overview emphasizes the amount of electric power that could be provided by wind power rather than traditional fossil fuels. New wind power markets, advances in technology, technology transfer, and wind resources are some topics covered in this publication

  20. Program overview: Subsurface science program

    International Nuclear Information System (INIS)

    1994-03-01

    The OHER Subsurface Science Program is DOE's core basic research program concerned with subsoils and groundwater. These practices have resulted in contamination by mixtures of organic chemicals, inorganic chemicals, and radionuclides. A primary long-term goal is to provide a foundation of knowledge that will lead to the reduction of environmental risks and to cost-effective cleanup strategies. Since the Program was initiated in 1985, a substantial amount of research in hydrogeology, subsurface microbiology, and the geochemistry of organically complexed radionuclides has been completed, leading to a better understanding of contaminant transport in groundwater and to new insights into microbial distribution and function in the subsurface environments. The Subsurface Science Program focuses on achieving long-term scientific advances that will assist DOE in the following key areas: providing the scientific basis for innovative in situ remediation technologies that are based on a concept of decontamination through benign manipulation of natural systems; understanding the complex mechanisms and process interactions that occur in the subsurface; determining the influence of chemical and geochemical-microbial processes on co-contaminant mobility to reduce environmental risks; improving predictions of contaminant transport that draw on fundamental knowledge of contaminant behavior in the presence of physical and chemical heterogeneities to improve cleanup effectiveness and to predict environmental risks

  1. Federal Energy Management Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    None

    2017-08-05

    Brochure offers an overview of the Federal Energy Management Program (FEMP), which provides agencies and organizations with the information, tools, and assistance they need to achieve their energy-related requirements and goals through specialized initiatives.

  2. Geothermal energy program overview

    Science.gov (United States)

    1991-12-01

    The mission of the Geothermal Energy Program is to develop the science and technology necessary for tapping our nation's tremendous heat energy sources contained within the Earth. Geothermal energy is a domestic energy source that can produce clean, reliable, cost-effective heat and electricity for our nation's energy needs. Geothermal energy - the heat of the Earth - is one of our nation's most abundant energy resources. In fact, geothermal energy represents nearly 40 percent of the total U.S. energy resource base and already provides an important contribution to our nation's energy needs. Geothermal energy systems can provide clean, reliable, cost-effective energy for our nation's industries, businesses, and homes in the form of heat and electricity. The U.S. Department of Energy's (DOE) Geothermal Energy Program sponsors research aimed at developing the science and technology necessary for utilizing this resource more fully. Geothermal energy originates from the Earth's interior. The hottest fluids and rocks at accessible depths are associated with recent volcanic activity in the western states. In some places, heat comes to the surface as natural hot water or steam, which have been used since prehistoric times for cooking and bathing. Today, wells convey the heat from deep in the Earth to electric generators, factories, farms, and homes. The competitiveness of power generation with lower quality hydrothermal fluids, geopressured brines, hot dry rock, and magma (the four types of geothermal energy), still depends on the technical advancements sought by DOE's Geothermal Energy Program.

  3. Geothermal Energy Program overview

    International Nuclear Information System (INIS)

    1991-12-01

    The mission of the Geothermal Energy Program is to develop the science and technology necessary for tapping our nation's tremendous heat energy sources contained with the Earth. Geothermal energy is a domestic energy source that can produce clean, reliable, cost- effective heat and electricity for our nation's energy needs. Geothermal energy -- the heat of the Earth -- is one of our nation's most abundant energy resources. In fact, geothermal energy represents nearly 40% of the total US energy resource base and already provides an important contribution to our nation's energy needs. Geothermal energy systems can provide clean, reliable, cost-effective energy for our nation's industries, businesses, and homes in the form of heat and electricity. The US Department of Energy's (DOE) Geothermal Energy Program sponsors research aimed at developing the science and technology necessary for utilizing this resource more fully. Geothermal energy originates from the Earth's interior. The hottest fluids and rocks at accessible depths are associated with recent volcanic activity in the western states. In some places, heat comes to the surface as natural hot water or steam, which have been used since prehistoric times for cooking and bathing. Today, wells convey the heat from deep in the Earth to electric generators, factories, farms, and homes. The competitiveness of power generation with lower quality hydrothermal fluids, geopressured brines, hot dry rock, and magma ( the four types of geothermal energy) still depends on the technical advancements sought by DOE's Geothermal Energy Program

  4. EPICS system: an overview

    International Nuclear Information System (INIS)

    Bartlett, J.F.; Bobbitt, J.S.; Kramper, B.J.; Lahey, T.E.; MacKinnon, B.A.; West, R.E.

    1984-02-01

    This paper presents an overview of the EPICS control system at FERMILAB. EPICS is a distributed, multi-user, interactive system for the control and monitoring of particle beamlines at a high-energy experimental physics laboratory. The overview discusses the operating environment of the control system, the requirements which determined the design decisions, the hardware and software configurations, and plans for the future growth and enhancement of the present system. This paper is the first of three related papers on the EPICS system. The other two cover (1) the system structure and user interface and (2) RSX implementation issues

  5. EPICS system: an overview

    Energy Technology Data Exchange (ETDEWEB)

    Bartlett, J.F.; Bobbitt, J.S.; Kramper, B.J.; Lahey, T.E.; MacKinnon, B.A.; West, R.E.

    1984-02-01

    This paper presents an overview of the EPICS control system at FERMILAB. EPICS is a distributed, multi-user, interactive system for the control and monitoring of particle beamlines at a high-energy experimental physics laboratory. The overview discusses the operating environment of the control system, the requirements which determined the design decisions, the hardware and software configurations, and plans for the future growth and enhancement of the present system. This paper is the first of three related papers on the EPICS system. The other two cover (1) the system structure and user interface and (2) RSX implementation issues.

  6. 2007 Biomass Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-10-27

    The Biomass Program is actively working with public and private partners to meet production and technology needs. With the corn ethanol market growing steadily, researchers are unlocking the potential of non-food biomass sources, such as switchgrass and forest and agricultural residues. In this way, the Program is helping to ensure that cost-effective technologies will be ready to support production goals for advanced biofuels.

  7. Pollution prevention pledge program: Program overview

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The Pollution Prevention Pledge Program invites facilities to develop pollution reduction goals which exceed existing provincial, municipal or federal regulatory requirements and to share them with the ministry of Environment and Energy. This document presents a program overview and looks at the following points: benefits of participation; pollution prevention pledge program; levels of participation; determining what to reduce; the 50/90 challenge; estimating and tracking reductions; verifying reductions; program registry and annual report; and achievement awards.

  8. Biopower Program, activities overview

    Energy Technology Data Exchange (ETDEWEB)

    Shepherd, P.

    2000-06-02

    Biomass is a proven option for electricity generation. A diverse range of biopower producers includes electric utilities, independent power producers, and the pulp and paper industry. To help expand opportunities for biomass power production, the U.S. Department of Energy established the Biopower Program and is sponsoring efforts to increase the productivity of dedicated energy crops. The Program aims to double biomass conversion efficiencies, thus reducing biomass power generation costs. These efforts will promote industrial and agricultural growth, improve the environment, create jobs, increase U.S. energy security, and provide new export markets.

  9. Hydrogen program overview

    Energy Technology Data Exchange (ETDEWEB)

    Gronich, S. [Dept. of Energy, Washington, DC (United States). Office of Utility Technologies

    1997-12-31

    This paper consists of viewgraphs which summarize the following: Hydrogen program structure; Goals for hydrogen production research; Goals for hydrogen storage and utilization research; Technology validation; DOE technology validation activities supporting hydrogen pathways; Near-term opportunities for hydrogen; Market for hydrogen; and List of solicitation awards. It is concluded that a full transition toward a hydrogen economy can begin in the next decade.

  10. Better Plants Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-09-30

    The U.S. Department of Energy’s (DOE’s) Better Buildings, Better Plants Program is a voluntary partnership initiative to drive significant energy efficiency improvement across energy intensive companies and organizations. 157 leading manufacturers and public water and wastewater treatment utilities are partnering with DOE through Better Plants to improve energy efficiency, slash carbon emissions, and cut energy costs.

  11. An overview of the Nuclear Electric Xenon Ion System (NEXIS) program

    Science.gov (United States)

    Polk, Jay E.; Goebel, Don; Brophy, John R.; Beatty, John; Monheiser, J.; Giles, D.; Hobson, D.; Wilson, F.; Christensen, J.; De Pano, M.; hide

    2003-01-01

    NASA is investigating high power, high specific impulse propulsion technologies that could enable ambitious flights such as multi-body rendezvous missions, outer planet orbiters and interstellar precursor missions. The requirements for these missions are much more demanding than those for state-of-the-art solar-powered ion propulsion applications. The purpose of the NEXIS program is to develop advanced ion thruster technologies that satisfy the requirements for high power, high specific impulse operation, high efficiency and long thruster life. The nominal design point for the NEXIS thruster is 20 kWe at a specific impulse of 7500 s with an efficiency over 78% and a xenon throughput capability of greater than 2000 kg. These performance and throughput goals will be achieved by applying a combination of advanced technologies including a large discharge chamber, erosion resistant carbon-carbon grids, an advanced reservoir hollow cathode and techniques for increasing propellant efficiency such as grid masking and accelerator grid aperture diameter tailoring. This paper provides an overview of the challenges associated with these requirements and how they are being addressed in the NEXIS program.

  12. Overview of demonstrator program of Japanese Smart Materials and Structure System project

    Science.gov (United States)

    Tajima, Naoyuki; Sakurai, Tateo; Sasajima, Mikio; Takeda, Nobuo; Kishi, Teruo

    2003-08-01

    The Japanese Smart Material and Structure System Project started in 1998 as five years' program that funded by METI (Ministry of Economy, Trade and Industry) and supported by NEDO (New Energy and Industrial Technology Development Organization). Total budget of five years was finally about 3.8 billion Japanese yen. This project has been conducted as the Academic Institutions Centered Program, namely, one of collaborated research and development among seven universities (include one foreign university), seventeen Industries (include two foreign companies), and three national laboratories. At first, this project consisted of four research groups that were structural health monitoring, smart manufacturing, active/adaptive structures, and actuator material/devices. Two years later, we decided that two demonstrator programs should be added in order to integrate the developed sensor and actuator element into the smart structure system and verify the research and development results of above four research groups. The application target of these demonstrators was focused to the airplane, and two demonstrators that these shapes simulate to the fuselage of small commercial airplane (for example, Boeing B737) had been established. Both demonstrators are cylindrical structures with 1.5 m in diameter and 3 m in length that the first demonstrator has CFRP skin-stringer and the second one has CFRP skin. The first demonstrator integrates the following six innovative techniques: (1) impact monitoring using embedded small diameter optical fiber sensors newly developed in this program, (2) impact monitoring using the integrated acoustic emission (AE) systems, (3) whole-field strain mapping using the BOTDR/FBG integrated system, (4) damage suppression using embedded shape memory alloy (SMA) films, (5) maximum and cyclic strain sensing using smart composite patches, and (6) smart manufacturing using the integrated sensing system. The second one is for demonstrating the suppression of

  13. Overview of the Space Launch System Transonic Buffet Environment Test Program

    Science.gov (United States)

    Piatak, David J.; Sekula, Martin K.; Rausch, Russ D.; Florance, James R.; Ivanco, Thomas G.

    2015-01-01

    Fluctuating aerodynamic loads are a significant concern for the structural design of a launch vehicle, particularly while traversing the transonic flight environment. At these trajectory conditions, unsteady aerodynamic pressures can excite the vehicle dynamic modes of vibration and result in high structural bending moments and vibratory environments. To ensure that vehicle structural components and subsystems possess adequate strength, stress, and fatigue margins in the presence of buffet and other environments, buffet forcing functions are required to conduct the coupled load analysis of the launch vehicle. The accepted method to obtain these buffet forcing functions is to perform wind-tunnel testing of a rigid model that is heavily instrumented with unsteady pressure transducers designed to measure the buffet environment within the desired frequency range. Two wind-tunnel tests of a 3 percent scale rigid buffet model have been conducted at the Langley Research Center Transonic Dynamics Tunnel (TDT) as part of the Space Launch System (SLS) buffet test program. The SLS buffet models have been instrumented with as many as 472 unsteady pressure transducers to resolve the buffet forcing functions of this multi-body configuration through integration of the individual pressure time histories. This paper will discuss test program development, instrumentation, data acquisition, test implementation, data analysis techniques, and several methods explored to mitigate high buffet environment encountered during the test program. Preliminary buffet environments will be presented and compared using normalized sectional buffet forcing function root-meansquared levels along the vehicle centerline.

  14. Commercial Building Energy Asset Score System: Program Overview and Technical Protocol (Version 1.0)

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Na; Gorrissen, Willy J.

    2013-01-11

    The U.S. Department of Energy (DOE) is developing a national voluntary energy asset score system that includes an energy asset score tool to help building owners evaluate their buildings with respect to the score system. The goal of the energy asset score system is to facilitate cost-effective investment in energy efficiency improvements of commercial buildings. The system will allow building owners and managers to compare their building infrastructure against peers and track building upgrade progress over time. The system can also help other building stakeholders (e.g., building operators, tenants, financiers, and appraisers) understand the relative efficiency of different buildings in a way that is independent from their operations and occupancy. This report outlines the technical protocol used to generate the energy asset score, explains the scoring methodology, and provides additional details regarding the energy asset score tool. This report also describes alternative methods that were considered prior to developing the current approach. Finally, this report describes a few features of the program where alternative approaches are still under evaluation.

  15. Expert Systems: An Overview.

    Science.gov (United States)

    Adiga, Sadashiv

    1984-01-01

    Discusses: (1) the architecture of expert systems; (2) features that distinguish expert systems from conventional programs; (3) conditions necessary to select a particular application for the development of successful expert systems; (4) issues to be resolved when building expert systems; and (5) limitations. Examples of selected expert systems…

  16. Fims, forestry information management system: An overview

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    This geographic information system has been developed as part of Forestry Canada's Eastern Quebec Forestry Program for woodlot owners in eastern Quebec. The goal was to provide private woodlot operators with a management system that uses the most advanced technology available. This booklet provides an overview of this system, explaining how the system can be used.

  17. LLL Laser-Fusion-Program overview and future directions in laser fusion systems

    International Nuclear Information System (INIS)

    Emmett, J.L.

    1983-01-01

    The primary goal of the inertial-fusion program at the Lawrence Livermore Laboratory is to demonstrate the scientific feasibility of the inertial-fusion concept using high-power glass: Nd lasers. The authors anticipate achieving a most important milestone-ignition-with the full (300kJ) Nova facility in the mid to late 1980s. Confidence in reaching this goal is based on the significant progress we have made in the state-of-the-art high power glass: Nd laser technology, in diagnosing and executing laser fusion and laser-plasma interaction experiments, and in theoretical and analytical computer codes which reliably model experimental results. Looking ahead to eventual civilian application, LLL is also making excellent progress in the areas of commercial reactor design, advanced target design and fabrication, and the advanced drivers required

  18. Nuclear Systems Kilopower Overview

    Science.gov (United States)

    Palac, Don; Gibson, Marc; Mason, Lee; Houts, Michael; McClure, Patrick; Robinson, Ross

    2016-01-01

    The Nuclear Systems Kilopower Project was initiated by NASAs Space Technology Mission Directorate Game Changing Development Program in fiscal year 2015 to demonstrate subsystem-level technology readiness of small space fission power in a relevant environment (Technology Readiness Level 5) for space science and human exploration power needs. The Nuclear Systems Kilopower Project consists of two elements. The primary element is the Kilopower Prototype Test, also called the Kilopower Reactor Using Stirling Technology(KRUSTY) Test. This element consists of the development and testing of a fission ground technology demonstrator of a 1 kWe fission power system. A 1 kWe system matches requirements for some robotic precursor exploration systems and future potential deep space science missions, and also allows a nuclear ground technology demonstration in existing nuclear test facilities at low cost. The second element, the Mars Kilopower Scalability Study, consists of the analysis and design of a scaled-up version of the 1 kWe reference concept to 10 kWe for Mars surface power projected requirements, and validation of the applicability of the KRUSTY experiment to key technology challenges for a 10 kWe system. If successful, these two elements will lead to initiation of planning for a technology demonstration of a 10 kWe fission power capability for Mars surface outpost power.

  19. A topaz international program overview

    Science.gov (United States)

    Thome, Frank V.; Wyant, Francis J.; Mulder, Daniel; McCarson, T. D.; Ponomarev-Stepnoi, Nikolai Nikolaevich

    1995-01-01

    Five years ago, during the 8th Symposium on Space Nuclear Power Systems, in Albuquerque, NM, Academician Nikolai Nikolaevich Ponomarev-Stepnoi, First Deputy Director of the Russian Research Center, Kurchatov Institute, proposed the sale of the Soviety Union's TOPAZ II technology to the United States. This proposal, made at great personal risk, was initially viewed with much skepticism by most Americans attending that conference since the Cold War was still in full swing. There were, however, a few visionaries, some would say fanatics, that set about to make this sale possible. Even these visionaries did not anticipate the collapse of the Soviet Union or the subsequent efforts by the U.S. and other Western powers to help the Newly Independent States transition to a market economy. Little did these visionaries know that the formation of the ``TOPAZ II Program,'' using former military space power technology of the Soviet Union, would become the preeminent example of technology cooperation between two former adversaries. A unique teaming arrangement formed in New Mexico, called the New Mexico Strategic Alliance and consisting of the Air Force Phillips Laboratory, Sandia National Laboratories, the University of New Mexico, and Los Alamos Nationalo Laboratory, was a key ingredient in making this program a success. A brief summary of some of the highlights of this technology partnership is given to explain how international patnerships of this type can enable commercialization and technology transfer.

  20. Nuclear thermal propulsion program overview

    Science.gov (United States)

    Bennett, Gary L.

    1991-01-01

    Nuclear thermal propulsion program is described. The following subject areas are covered: lunar and Mars missions; national space policy; international cooperation in space exploration; propulsion technology; nuclear rocket program; and budgeting.

  1. USNRC HTGR safety research program overview

    International Nuclear Information System (INIS)

    Foulds, R.B.

    1982-01-01

    An overview is given of current activities and planned research efforts of the US Nuclear Regulatory Commission (NRC) HTGR Safety Program. On-going research at Brookhaven National Laboratory, Oak Ridge National Laboratory, Los Alamos National Laboratory, and Pacific Northwest Laboratory are outlined. Tables include: HTGR Safety Issues, Program Tasks, HTGR Computer Code Library, and Milestones for Long Range Research Plan

  2. Expert systems: An overview

    International Nuclear Information System (INIS)

    Verdejo, F.

    1985-01-01

    The purpose of this article is to introduce readers to the basic principles of rule-based expert systems. Four topics are discussed in subsequent sections: (1) Definition; (2) Structure of an expert system; (3) State of the art and (4) Impact and future research. (orig.)

  3. Overview of the Defense Programs Research and Technology Development Program for Fiscal Year 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-30

    This documents presents a programmatic overview and program element plan summaries for conceptual design and assessment; physics; computation and modeling; system engineering science and technology; electronics, photonics, sensors, and mechanical components; chemistry and materials; special nuclear materials, tritium, and explosives.

  4. NASA/FAA Tailplane Icing Program Overview

    Science.gov (United States)

    Ratvasky, Thomas P.; VanZante, Judith Foss; Riley, James T.

    1999-01-01

    The effects of tailplane icing were investigated in a four-year NASA/FAA Tailplane Icing, Program (TIP). This research program was developed to improve the understanding, of iced tailplane aeroperformance and aircraft aerodynamics, and to develop design and training aides to help reduce the number of incidents and accidents caused by tailplane icing. To do this, the TIP was constructed with elements that included icing, wind tunnel testing, dry-air aerodynamic wind tunnel testing, flight tests, and analytical code development. This paper provides an overview of the entire program demonstrating the interconnectivity of the program elements and reports on current accomplishments.

  5. Security systems engineering overview

    International Nuclear Information System (INIS)

    Steele, B.J.

    1996-01-01

    Crime prevention is on the minds of most people today. The concern for public safety and the theft of valuable assets are being discussed at all levels of government and throughout the public sector. There is a growing demand for security systems that can adequately safeguard people and valuable assets against the sophistication of those criminals or adversaries who pose a threat. The crime in this country has been estimated at $70 billion in direct costs and up to $300 billion in indirect costs. Health insurance fraud alone is estimated to cost American businesses $100 billion. Theft, warranty fraud, and counterfeiting of computer hardware totaled $3 billion in 1994. A threat analysis is a prerequisite to any security system design to assess the vulnerabilities with respect to the anticipated threat. Having established a comprehensive definition of the threat, crime prevention, detection, and threat assessment technologies can be used to address these criminal activities. This talk will outline the process used to design a security system regardless of the level of security. This methodology has been applied to many applications including: government high security facilities; residential and commercial intrusion detection and assessment; anti-counterfeiting/fraud detection technologies (counterfeit currency, cellular phone billing, credit card fraud, health care fraud, passport, green cards, and questionable documents); industrial espionage detection and prevention (intellectual property, computer chips, etc.); and security barrier technology (creation of delay such as gates, vaults, etc.)

  6. An Overview of Turkish Healthcare System after Health Transformation Program: Main Successes, Performance Assessment, Further Challenges, and Policy Options

    Directory of Open Access Journals (Sweden)

    Kadir GÜRSOY

    2015-02-01

    Full Text Available Turkish healthcare system has been stated to show significant improvements regarding wider access to healthcare facilities, and the quality and efficiency through the introduction of Health Transformation Program launched in 2003. While the old system relied on differing provisions and financing and lacked behind many developed nations in terms of health outcomes, the new system achieved nearly universal coverage and many health outcomes enhanced significantly. Health expenditures rose to 5.4% of GDP in 2013 from 4.8% in 1998. Furthermore, Turkey provided both better financial protection for the poor against high health expenditures, and equity in access to health care across the population. However, Turkey still faces new challenges to catch other developed countries to have better health and further improve financial sustainability. To reach these targets, Turkey needs to further implement new policy options for reform such as combating informal economy, allocating more on health resources, designing incentive- based payment methods, adopting gate keeping system and referral chain, developing capacity to deploy health technology assessments in reimbursement decisions, and ensuring the hospital autonomy.

  7. Department of Energy Hazardous Waste Remedial Actions Program: An overview

    International Nuclear Information System (INIS)

    Eyman, L.D.; Swiger, R.F.

    1988-01-01

    This paper describes the national Department of Energy (DOE) program for managing hazardous waste. An overview of the DOE Hazardous Waste Remedial Actions Program (HAZWRAP), including its mission, organizational structure, and major program elements, is given. The paper focuses on the contractor support role assigned to Martin Marietta Energy Systems, Inc., through the establishment of the HAZWRAP Support Contractor Office (SCO). The major SCO programs are described, and the organization for managing the programs is discussed. The HAZWRAP SCO approaches to waste management planning and to technology research, development, and demonstration are presented. The role of the SCO in the DOE Environmental Restoration Program and the development of the DOE Waste Information network are reviewed. Also discussed is the DOE Work for Others Program, where waste management decentralized support, via interagency agreements between DOE and the Department of Defense and DOE and the Environmental Protection Agency, is provided for those sponsors planning remedial response actions. 2 refs

  8. Photovoltaic Energy Program overview, fiscal year 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    The US Department of Energy (DOE) Photovoltaic Energy Program fosters the widespread acceptance of photovoltaic (PV) technology and accelerates commercial use of US PV products. The Program is founded on a collaborative strategy involving industry, the research and development community, potential users, utilities, and state and federal agencies. There are three main Program elements: Systems Engineering and Applications, Technology Development, and Research and Development.

  9. Cosmic Origins (COR) Technology Development Program Overview

    Science.gov (United States)

    Werneth, Russell; Pham, B.; Clampin, M.

    2014-01-01

    The Cosmic Origins (COR) Program Office was established in FY11 and resides at the NASA Goddard Space Flight Center (GSFC). The office serves as the implementation arm for the Astrophysics Division at NASA Headquarters for COR Program related matters. We present an overview of the Program’s technology management activities and the Program’s technology development portfolio. We discuss the process for addressing community-provided technology needs and the Technology Management Board (TMB)-vetted prioritization and investment recommendations. This process improves the transparency and relevance of technology investments, provides the community a voice in the process, and leverages the technology investments of external organizations by defining a need and a customer. Goals for the COR Program envisioned by the National Research Council’s (NRC) “New Worlds, New Horizons in Astronomy and Astrophysics” (NWNH) Decadal Survey report includes a 4m-class UV/optical telescope that would conduct imaging and spectroscopy as a post-Hubble observatory with significantly improved sensitivity and capability, a near-term investigation of NASA participation in the Japanese Aerospace Exploration Agency/Institute of Space and Astronautical Science (JAXA/ISAS) Space Infrared Telescope for Cosmology and Astrophysics (SPICA) mission, and future Explorers.

  10. AUA Program Master Plan. Volume 1: Overview

    Science.gov (United States)

    1997-03-01

    The Office of Air Traffic Systems Development (AUA) Program Master Plan : summarizes the management, development approach, and status of products and : services provided by the AUA organization to fulfill its role in supporting : National Airspace Sy...

  11. Atmospheric aerosol system: An overview

    International Nuclear Information System (INIS)

    Prospero, J.M.; Charlson, R.J.; Mohnen, V.; Jaenicke, R.; Delany, A.C.; Moyers, J.; Zoller, W.; Rahn, K.

    1983-01-01

    Aerosols could play a critical role in many processes which impact on our lives either indirectly (e.g., climate) or directly (e.g., health). However, our ability to assess these possible impacts is constrained by our limited knowledge of the physical and chemical properties of aerosols, both anthropogenic and natural. This deficiency is attributable in part to the fact that aerosols are the end product of a vast array of chemical and physical processes. Consequently, the properties of the aerosol can exhibit a great deal of variability in both time and space. Furthermore, most aerosol studies have focused on measurements of a single aerosol characteristic such as composition or size distribution. Such information is generally not useful for the assessment of impacts because the degree of impact may depend on the integral properties of the aerosol, for example, the aerosol composition as a function of particle size. In this overview we discuss recent work on atmospheric aerosols that illustrates the complex nature of the aerosol chemical and physical system, and we suggest strategies for future research. A major conclusion is that man has had a great impact on the global budgets of certain species, especially sulfur and nitrogen, that play a dominant role in the atmospheric aerosol system. These changes could conceivably affect climate. Large-scale impacts are implied because it has recently been demonstrated that natural and pollutant aerosol episodes can be propagated over great distances. However, at present there is no evidence linking anthropogenic activities with a persistent increase in aerosol concentrations on a global scale. A major problem in assessing man's impact on the atmospheric aerosol system and on global budgets is the absence of aerosol measurements in remote marine and continental areas

  12. Overview of AEOD's program for trending reactor operational events

    International Nuclear Information System (INIS)

    Baranowsky, P.W.; O'Reilly, P.D.; Rasmuson, D.M.; Houghton, J.R.

    1994-01-01

    This paper presents an overview of the trending program being performed by AEOD. The major elements of the program include: (1) system and component reliability trending and analysis, (2) special data collection and analysis (e.g., IPE and PRA component failure data, common cause failure event data), (3) risk assessment of safety issues based on actual operating experience, (4) Accident Sequence Precursor (ASP) Program, and (5) trending US industry risk. AEOD plans to maintain up-to-date safety data trends for selected high risk or high regulatory profile components, systems, accident initiators, accident sequences, and regulatory issues. AEOD will also make greater use of PRA insights and perform limited probabilistic safety assessments to evaluate the safety significance of qualitative results. Examples of a system study and an issue evaluation are presented, as well as a summary of the common cause failure event database

  13. Photovoltaic energy program overview, fiscal year 1991

    Science.gov (United States)

    1992-02-01

    The Photovoltaics Program Plan, FY 1991 to FY 1995 builds on the accomplishments of the past 5 years and broadens the scope of program activities for the future. The previous plan emphasized materials and PV cell research. Under the balanced new plan, the PV Program continues its commitment to strategic research and development (R&D) into PV materials and processes, while also beginning work on PV systems and helping the PV industry encourage new markets for photovoltaics. A major challenge for the program is to assist the US PV industry in laying the foundation for at least 1000 MW of installed PV capacity in the United States and 500 MW internationally by 2000. As part of the new plan, the program expanded the scope of its activities in 1991. The PV Program is now addressing many new aspects of developing and commercializing photovoltaics. It is expanding activities with the US PV industry through the PV Manufacturing Technology (PVMaT) project, designed to address US manufacturers' immediate problems; providing technical assistance to potential end users such as electric utilities; and the program is turning its attention to encouraging new markets for PV. In 1991, for example, the PV Program initiated a new project with the PV industry to encourage a domestic market for PV applications in buildings and began cooperative ventures to support other countries such as Mexico to use PV in their rural electrification programs. This report reviews some of the development, fabrication and manufacturing advances in photovoltaics this year.

  14. An overview of the SAFSIM computer program

    International Nuclear Information System (INIS)

    Dobranich, D.

    1993-01-01

    SAFSIM (System Analysis Flow SIMulator) is a FORTRAN computer program that provides engineering simulations of user-specified flow networks at the system level. It includes fluid mechanics, heat transfer, and reactor dynamics capabilities. SAFSIM provides sufficient versatility to allow the simulation of almost any flow system, from a backyard sprinkler system to a clustered nuclear reactor propulsion system. In addition to versatility, speed and robustness are primary goals of SAFSIM development. The current capabilities of SAFSIM are summarized and some sample applications are presented. It is applied here to a nuclear thermal propulsion system and nuclear rocket engine test facility

  15. NASA Technology Demonstrations Missions Program Overview

    Science.gov (United States)

    Turner, Susan

    2011-01-01

    , more than 70% of the TDM funds will be competitively awarded as a result of yearly calls for proposed flight demonstrators and selected based on possible payoff to NASA, technology maturity, customer interest, cost, and technical risk reduction. This paper will give an overview of the TDM Program s mission and organization, as well as its current status in delivering advanced space technologies that will enable more flexible and robust future missions. It also will provide several examples of missions that fit within these parameters and expected outcomes.

  16. The Coastal Ocean Prediction Systems program: Understanding and managing our coastal ocean. Volume 2: Overview and invited papers

    Energy Technology Data Exchange (ETDEWEB)

    1990-05-15

    This document is a compilation of summaries of papers presented at the Coastal Ocean Prediction Systems workshop. Topics include; marine forecasting, regulatory agencies and regulations, research and application models, research and operational observing, oceanic and atmospheric data assimilation, and coastal physical processes.

  17. Programmed Cell Death in Plants: An Overview.

    Science.gov (United States)

    Locato, Vittoria; De Gara, Laura

    2018-01-01

    Programmed cell death (PCD) is a controlled mechanism that eliminates specific cells under developmental or environmental stimuli. All organisms-from bacteria to multicellular eukaryotes-have the ability to induce PCD in selected cells. Although this process was first identified in plants, the interest in deciphering the signaling pathways leading to PCD strongly increased when evidence came to light that PCD may be involved in several human diseases. In plants, PCD activation ensures the correct occurrence of growth and developmental processes, among which embryogenesis and differentiation of tracheary elements. PCD is also part of the defense responses activated by plants against environmental stresses, both abiotic and biotic.This chapter gives an overview of the roles of PCD in plants as well as the problems arising in classifying different kinds of PCD according to defined biochemical and cellular markers, and in comparison with the various types of PCD occurring in mammal cells. The importance of understanding PCD signaling pathways, with their elicitors and effectors, in order to improve plant productivity and resistance to environmental stresses is also taken into consideration.

  18. Natural Programming: Project Overview and Proposal

    National Research Council Canada - National Science Library

    Myers, Brad

    1998-01-01

    .... The Natural Programming Project is developing general principles, methods, and programming language designs that will significantly reduce the amount of learning and effort needed to write programs...

  19. Mobile Multi-System Overview

    Science.gov (United States)

    Witoff, Robert J.; Doody, David F.

    2012-01-01

    At the time of this reporting, there are 2,589 rich mobile devices used at JPL, including 1,550 iPhones and 968 Blackberrys. Considering a total JPL population of 5,961 employees, mobile applications have a total addressable market of 43 percent of the employees at JPL, and that number is rising. While it was found that no existing desktop tools can realistically be replaced by a mobile application, there is certainly a need to improve access to these desktop tools. When an alarm occurs and an engineer is away from his desk, a convenient means of accessing relevant data can save an engineer a great deal of time and improve his job efficiency. To identify which data is relevant, an engineer benefits from a succinct overview of the data housed in 13+ tools. This need can be well met by a single, rich, mobile application that provides access to desired data across tools in the ops infrastructure.

  20. Photovoltaic Energy Program Overview, Fiscal Year 2000

    Energy Technology Data Exchange (ETDEWEB)

    Weis-Taylor, P.

    2001-03-02

    This ''annual report'' details the FY 2000 achievements of the U.S. Department of Energy PV Program in the categories of Research and Development, Technology Development, and Systems Engineering and Applications. Highlights include development of a record-breaking concentrator solar cell that is 32.4% efficient; fabrication of a record CIGS (copper indium gallium diselenide) cell at 18.8% efficiency; sharing an R and D 100 award with Siemens Solar Industries and the California Energy Commission for development and deployment of commercial CIS thin-film modules; and support for the efforts of the PV Industry Roadmap Workshop.

  1. An Overview of Production Systems

    Science.gov (United States)

    1975-10-01

    DISTRIBUTED BY: Matonal Tochnica! Infonu srice U. S. DEPARTMENT OF COMMERCE 028143 Stanford Artificil Inteligence Laboratory October 1975 Memo AIM-271...ORGANIZATION NAMEL AND ADDRESS 18. PROGRAM ELEMENT. PROJECT. TASK Artificial Intelligence Laboratory AE OKUI UBR Stanford University ARPA Order 249...014-64011I j SEC-jRITY CLASSIFICATION OF THIS PAGE (When, Data bHISP011 A Stanford Artificial ktteligncs Laboratory October 1975 Memo AIM-271 Computer

  2. Natural Programming: Project Overview and Proposal

    National Research Council Canada - National Science Library

    Myers, Brad

    1998-01-01

    End-users must write programs to control many different kinds of applications. Examples include multimedia authoring, controlling robots, defining manufacturing processes, setting up simulations, programming agents, scripting, etc...

  3. Human genome program report. Part 1, overview and progress

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    This report contains Part 1 of a two-part report to reflect research and progress in the U.S. Department of Energy Human Genome Program from 1994 through 1996, with specified updates made just before publication. Part 1 consists of the program overview and report on progress.

  4. An Overview of Head Start Program Studies

    Science.gov (United States)

    Hines, Jeanne Morris

    2017-01-01

    Johnson's "War on Poverty" administrative team campaigned for committee members to join the War on Poverty efforts to create and develop programs for children born into poverty (Zigler, 2003). Poverty based programs, such as the Head Start program, continue to put into place proactive measures to increase preschooler's cognitive…

  5. Integrated computer control system architectural overview

    Energy Technology Data Exchange (ETDEWEB)

    Van Arsdall, P.

    1997-06-18

    This overview introduces the NIF Integrated Control System (ICCS) architecture. The design is abstract to allow the construction of many similar applications from a common framework. This summary lays the essential foundation for understanding the model-based engineering approach used to execute the design.

  6. Overview of the Immune System

    Science.gov (United States)

    ... at NIAID Visitor Information Contact Us Research > NIAID's Role in Research > Immune System Research share with facebook share with twitter share ... such as allergic reactions and autoimmune disease. The ... a unique role, with different ways of recognizing problems, communicating with ...

  7. TARDEC's Intelligent Ground Systems overview

    Science.gov (United States)

    Jaster, Jeffrey F.

    2009-05-01

    The mission of the Intelligent Ground Systems (IGS) Area at the Tank Automotive Research, Development and Engineering Center (TARDEC) is to conduct technology maturation and integration to increase Soldier robot control/interface intuitiveness and robotic ground system robustness, functionality and overall system effectiveness for the Future Combat System Brigade Combat Team, Robotics Systems Joint Project Office and game changing capabilities to be fielded beyond the current force. This is accomplished through technology component development focused on increasing unmanned ground vehicle autonomy, optimizing crew interfaces and mission planners that capture commanders' intent, integrating payloads that provide 360 degree local situational awareness and expanding current UGV tactical behavior, learning and adaptation capabilities. The integration of these technology components into ground vehicle demonstrators permits engineering evaluation, User assessment and performance characterization in increasingly complex, dynamic and relevant environments to include high speed on road or cross country operations, all weather/visibility conditions and military operations in urban terrain (MOUT). Focused testing and experimentation is directed at reducing PM risk areas (safe operations, autonomous maneuver, manned-unmanned collaboration) and transitioning technology in the form of hardware, software algorithms, test and performance data, as well as User feedback and lessons learned.

  8. The NASA Electronic Parts and Packaging (NEPP) Program: An Overview

    Science.gov (United States)

    LaBel, Kenneth A.; Sampson, Michael J.

    2016-01-01

    This presentation provides an overview of the NEPP Program. The NEPP Mission is to provide guidance to NASA for the selection and application of microelectronics technologies; Improve understanding of the risks related to the use of these technologies in the space environment; Ensure that appropriate research is performed to meet NASA mission assurance needs. NEPP's Goals are to provide customers with appropriate and cost-effective risk knowledge to aid in: Selection and application of microelectronics technologies; Improved understanding of risks related to the use of these technologies in the space environment; Appropriate evaluations to meet NASA mission assurance needs; Guidelines for test and application of parts technologies in space; Assurance infrastructure and support for technologies in use by NASA space systems.

  9. Aerial measuring systems program

    International Nuclear Information System (INIS)

    Jobst, J.E.

    1979-01-01

    EG and G, Inc., has developed for the Department of Energy (DOE) an Aerial Measuring Systems (AMS) program dedicated to environmental research at facilities of interest to DOE, the Nuclear Regulatory Commission (NRC), and other federal agencies. The AMS was orginally created to measure nuclear radiation; the program scope has been broadened dramatically to include a wide variety of remote sensors: multispectral and mapping cameras, optical and infrared multispectral scanners, air-sampling systems, and meteorological sensors. The AMS maintains seven aircraft as survey platforms, both fixed-wind aircraft and helicopters. Photography, scanner imagery, and radiation data are processed in dedicated, modern laboratories and used for a broad range of environmental impact studies. A graphic overview system has been developed for effective presentation of all types of remotely sensed data obtained at a facility of interest

  10. Overview of a pharmacist anticoagulation certificate program.

    Science.gov (United States)

    Kirk, Julienne K; Edwards, Rebecca; Brewer, Andrew; Miller, Cathey; Bray, Bryan; Groce, James B

    2017-07-01

    To describe the design of an ongoing anticoagulation certificate program and annual renewal update for pharmacists. Components of the anticoagulation certificate program include home study, pre- and posttest, live sessions, case discussions with evaluation and presentation, an implementation plan, and survey information (program evaluation and use in practice). Clinical reasoning skills were assessed through case work-up and evaluation prior to live presentation. An annual renewal program requires pharmacists to complete home study and case evaluations. A total of 361 pharmacists completed the anticoagulation certificate program between 2002 and 2015. Most (62%) practiced in ambulatory care and 38% in inpatient care settings (8% in both). In the past four years, 71% were working in or starting anticoagulation clinics in ambulatory and inpatient settings. In their evaluations of the program, an average of 90% of participants agreed or strongly agreed the lecture material was relevant and objectives were met. Pharmacists are able to apply knowledge and skills in management of anticoagulation. This structured practice-based continuing education program was intended to enhance pharmacy practice and has achieved that goal. The certificate program in anticoagulation was relevant to pharmacists who attended the program. Copyright © 2017. Published by Elsevier Inc.

  11. Overview of PNGV Battery Development and Test Programs

    Energy Technology Data Exchange (ETDEWEB)

    Motloch, Chester George; Murphy, Timothy Collins; Sutula, Raymond; Miller, Ted J.

    2002-02-01

    Affordable, safe, long-lasting, high-power batteries are requisites for successful commercialization of hybrid electric vehicles. The U.S. Department of Energy’s Office of Advance Automotive Technologies and the Partnership for a New Generation of Vehicles are funding research and development programs to address each of these issues. An overview of these areas is presented along with a summary of battery development and test programs, as well as recent performance data from several of these programs.

  12. An overview of the Structural Aging Program

    International Nuclear Information System (INIS)

    Naus, D.J.; Arndt, E.G.

    1992-01-01

    The structural Aging Program is conducted at the Oak Ridge National Laboratory (ORNL) for the Nuclear Regulatory Commission (NRC). The program has the overall objective of preparing an expandable handbook or report which will provide NRC with potential structural safety issues and acceptance criteria for use in nuclear power plant evaluations for continued service. Initial focus of the program is on concrete and concrete-related materials which comprise safety-related (Category I) structures in light-water reactor facilities. The program is organized into four tasks: Task S.1 -- Program Management, Task S.2 -- Materials Property Data Base, Task S.3 -- Structural Component Assessment/Repair Technology, and Task S.4 -- Quantitative Methodology for Continued Service Determinations. Objectives, background information, and accomplishments under each of these tasks are presented

  13. An Overview of English Extensive Reading Program

    OpenAIRE

    Fujikami , Ryuji; Nagasaka, Tatsuhiko Paul; Yoshino, Yasuko; Jones, Andrew

    2013-01-01

    In this paper, we review the changes in attitude toward reading English shown by students as a result of participating in an extensive reading program. The top classes for each department studying Integrated English in the first semester of 2012 were given the challenge of reading extensively in English, using simple readers from leading publishers. Before and after the program, the non-English majors were asked to answer a questionnaire designed to reveal their attitudes toward reading Engli...

  14. Overview of international fusion technology programs

    International Nuclear Information System (INIS)

    Coffman, F.E.; Baublitz, J.E.; Beard, D.S.; Cohen, M.M.; Dalder, E.N.C.; Finfgeld, C.R.; Haas, G.M.; Head, C.R.; Murphy, M.R.; Nardella, G.R.

    1979-01-01

    World fusion technology programs, as well as current progress and future plans for the U.S., are discussed. Regarding conceptual design, the international INTOR tokamak study, the Garching Ignition Test Reactor Study, the U.S. Engineering Test Facility conceptual design, the Argonne National Laboratory Commercial Tokamak Study, mirror conceptual designs, and alternate concepts and applications studies are summarized. With regard to magnetics, progress to date in the large coil program and pulsed coil program is summarized. In the area of plasma heating and fueling and exhaust, work on a new positive ion source research and development program at Lawrence Berkeley Laboratory and Oak Ridge National Laboratory is described, as is negative ion work. Tradeoff considerations for radio-frequency heating alternatives are made, and a new 60-100 GHz electron cyclotron heating research and development program is discussed. Progress and plans for solid hydrogen pellet injector development are analyzed, as are plans for a divertor technology initiative. A brief review of the U.S. alternate applications and environment and safety program is included

  15. Overview of the DOE nuclear data program

    International Nuclear Information System (INIS)

    Whetstone, S.L.

    1991-01-01

    Numerous researchers receive support from the US Department of Energy's (DOE's) nuclear data program; others work closely with it, attending coordination meetings and contributing to data activities. Since fiscal year (FY) 1988, the nuclear data program has been included in the budget of the Division of Nuclear Physics in the DOE's Office of High Energy and Nuclear Physics. The budget for nuclear data consists of two budget categories: nuclear data compilation and evaluation and nuclear data measurements, both of which are contained within the low-energy nuclear physics program. The program has become essentially the sole supporter of the National Nuclear Data Center at Brookhaven National Laboratory. The Center coordinates the production of the ENSDF data base and Nuclear Data Sheets as well as, through the Cross Section Evaluation Working Group (CSEWG138), the production of the ENDF. Two rather large accelerator facilities, completely supported by the program, the Oak Ridge Electron Linear Accelerator and the fast neutron generator at Argonne National Laboratory, form the core of the nuclear data measurement activity together with measurement programs at Los Alamos National Laboratory's LAMPF/WNR facility, and at accelerator laboratories at Ohio University, Duke University, the University of Lowell, the University of Michigan, and the Colorado School of Mines. Some history is discussed and future modernizing plans are identified

  16. Heavy-Section Steel Technology program overview

    International Nuclear Information System (INIS)

    Pennell, W.E.

    1990-01-01

    This paper presents a status review of ongoing HSST program tasks aimed at refining the technology used in analysis of reactor pressure vessel fracture margins under pressurized thermal-shock (PTS) loading. Specific fracture-technology issues addressed include vessel flaw density and distribution, shallow flaws, fracture-toughness data transfer, circumferential cracks, ductile tearing and the influence of low-tearing toughness in stainless steel cladding. Preliminary results from the analysis and test programs are presented, together with interim assessments of their potential impact on a reactor vessel PTS analysis. 31 refs., 23 figs., 1 tab

  17. Overview of NRC PRA research program

    International Nuclear Information System (INIS)

    Cunningham, M.A.; Drouin, M.T.; Ramey-Smith, A.M.; VanderMolen, M.T.

    1997-01-01

    The NRC's research program in probabilistic risk analysis includes a set of closely-related elements, from basic research to regulatory applications. The elements of this program are as follows: (1) Development and demonstration of methods and advanced models and tools for use by the NRC staff and others performing risk assessments; (2) Support to agency staff on risk analysis and statistics issues; (3) Reviews of risk assessments submitted by licensees in support of regulatory applications, including the IPEs and IPEEEs. Each of these elements is discussed in the paper, providing highlights of work within an element, and, where appropriate, describing important support and feedback mechanisms among elements

  18. Subseabed Disposal Program plan. Volume I. Overview

    International Nuclear Information System (INIS)

    1980-01-01

    Some of the most stable geologic formations are underneath the deep oceans. Purpose of this program is to assess the technical, environmental, and engineering feasibility of disposing of packaged high-level waste and/or repackaged spent reactor fuel in these formations

  19. Subseabed Disposal Program Plan. Volume I. Overview

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-07-01

    The primary objective of the Subseabed Disposal Program (SDP) is to assess the scientific, environmental, and engineering feasibility of disposing of processed and packaged high-level nuclear waste in geologic formations beneath the world's oceans. High-level waste (HLW) is considered the most difficult of radioactive wastes to dispose of in oceanic geologic formations because of its heat and radiation output. From a scientific standpoint, the understanding developed for the disposal of such HLW can be used for other nuclear wastes (e.g., transuranic - TRU - or low-level) and materials from decommissioned facilities, since any set of barriers competent to contain the heat and radiation outputs of high-level waste will also contain such outputs from low-level waste. If subseabed disposal is found to be feasible for HLW, then other factors such as cost will become more important in considering subseabed emplacement for other nuclear wastes. A secondary objective of the SDP is to develop and maintain a capability to assess and cooperate with the seabed nuclear waste disposal programs of other nations. There are, of course, a number of nations with nuclear programs, and not all of these nations have convenient access to land-based repositories for nuclear waste. Many are attempting to develop legislative and scientific programs that will avoid potential hazards to man, threats to other ocean uses, and marine pollution, and they work together to such purpose in meetings of the international NEA/Seabed Working Group. The US SDP, as the first and most highly developed R and D program in the area, strongly influences the development of subseabed-disposal-related policy in such nations.

  20. Subseabed Disposal Program Plan. Volume I. Overview

    International Nuclear Information System (INIS)

    1981-07-01

    The primary objective of the Subseabed Disposal Program (SDP) is to assess the scientific, environmental, and engineering feasibility of disposing of processed and packaged high-level nuclear waste in geologic formations beneath the world's oceans. High-level waste (HLW) is considered the most difficult of radioactive wastes to dispose of in oceanic geologic formations because of its heat and radiation output. From a scientific standpoint, the understanding developed for the disposal of such HLW can be used for other nuclear wastes (e.g., transuranic - TRU - or low-level) and materials from decommissioned facilities, since any set of barriers competent to contain the heat and radiation outputs of high-level waste will also contain such outputs from low-level waste. If subseabed disposal is found to be feasible for HLW, then other factors such as cost will become more important in considering subseabed emplacement for other nuclear wastes. A secondary objective of the SDP is to develop and maintain a capability to assess and cooperate with the seabed nuclear waste disposal programs of other nations. There are, of course, a number of nations with nuclear programs, and not all of these nations have convenient access to land-based repositories for nuclear waste. Many are attempting to develop legislative and scientific programs that will avoid potential hazards to man, threats to other ocean uses, and marine pollution, and they work together to such purpose in meetings of the international NEA/Seabed Working Group. The US SDP, as the first and most highly developed R and D program in the area, strongly influences the development of subseabed-disposal-related policy in such nations

  1. Geothermal Program Overview: Fiscal Years 1993-1994

    Energy Technology Data Exchange (ETDEWEB)

    1995-11-01

    Geothermal energy represents the largest U.S. energy resource base and already provides an important contribution to our nation's energy needs. This overview looks at the basic science behind the various geothermal technologies and provides information on DOE Geothermal Energy Program activities and accomplishments.

  2. EPRI nuclear plant life extension program overview

    International Nuclear Information System (INIS)

    Rubio, A.; Carey, J.J.; Lapides

    1986-01-01

    In 1978-1979, EPRI undertook a series of studies which suggested that extending the operation of current nuclear generating units beyond their nominal 40-year license term was both technically feasible and economically attractive. In 1984, these results were reviewed and confirmed and more detailed evaluations initiated. Major elements include: a) identification of life extension as a strategic element of the EPRI Nuclear Division program; b) formulation of a joint EPRI/DOE program plan to culminate in the licensing of a generating unit(s) for extended life; and, c) initiation of two extensive studies, by and with utilities, to provide guidelines for such achievement. The pilot studies began in early 1985. This paper describes the background and status of these efforts to date

  3. Overview of INPO and its programs

    International Nuclear Information System (INIS)

    Russ, E.K.

    1982-01-01

    In 1979, nuclear facilities in the United States committed to establishing an independent nonprofit organization dedicated to operational safety in their nuclear power plants. This commitment resulted in the formation of the Institute of Nuclear Power Operations (INPO). The Institute identifies generic safety problems and precursors by reviewing and analyzing nuclear power plant operating experiences. INPO communicates this information to its members to help reduce the possibility of similar occurrences at other plants. In addition, INPO conducts evaluations of nuclear power plant operations to aid in identifying areas in which improvements can be made. Assisting members in developing and maintaining high quality effective training programs represents another INPO responsibility. The Institute also aids nuclear utilities in developing and maintaining effective radiological protection and chemistry programs and emergency response capabilities

  4. Photovoltaic Energy Program Overview, Fiscal Year 1997

    Energy Technology Data Exchange (ETDEWEB)

    1998-02-01

    The National Photovoltaic (PV) Program, a joint effort of DOE, the national laboratories, and the U.S. PV industry, had exciting advances and significant accomplishments in fiscal year 1997. The booklet provides details of new products introduced, manufacturing processes improved, capacity expanded, and new materials explored. The Million Solar Roofs Initiative, announced by President Clinton on June 26, 1997, will build on the solid foundation of steady research progress in laboratories and universities, industry investment in new technology and capacity, and the burgeoning solar power market both here and abroad.

  5. LLL magnetic fusion energy program: an overview

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    Over the last 12 months, significant progress has been made in the LLL magnetic fusion energy program. In the 2XIIB experiment, a tenfold improvement was achieved in the plasma confinement factor (the product of plasma density and confinement time), pushed plasma temperature and pressure to values never before reached in a magnetic fusion experiment, and demonstrated--for the first time--plasma startup by neutral beam injection. A new laser-pellet startup technique for Baseball IIT has been successfully tested and is now being incorporated in the experiment. Technological improvements have been realized, such as a breakthrough in fabricating niobium-tin conductors for superconducting magnets. These successes, together with complementary progress in theory and reactor design, have led to a proposal to build the MX facility, which could be on the threshold of a mirror fusion reactor

  6. DoD Pharmacy Program Overview

    Science.gov (United States)

    2011-01-24

    Automatic Profile Review • 180 day look-back –Seamless to beneficiary –Manual PA criteria established by P&T 2011 MHS Conference 23 Lipitor Step-Therapy... pillbox : a system-wide approach to improving patient medication adherence for chronic disease. Aug 2009. Available at: http://www.nehi.net/publications

  7. Greenhouse Gas Management Program Overview (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2011-11-01

    Program fact sheet highlighting federal requirements for GHG emissions management, FEMP services to help agencies reduce emissions, and additional resources. The U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP) assists Federal agencies with managing their greenhouse gas (GHG) emissions. GHG management entails measuring emissions and understanding their sources, setting a goal for reducing emissions, developing a plan to meet this goal, and implementing the plan to achieve reductions in emissions. FEMP provides the following services to help Federal agencies meet the requirements of inventorying and reducing their GHG emissions: (1) FEMP offers one-on-one technical assistance to help agencies understand and implement the Federal Greenhouse Gas Accounting and Reporting Guidance and fulfill their inventory reporting requirements. (2) FEMP provides training, tools, and resources on FedCenter to help agencies complete their annual inventories. (3) FEMP serves a leadership role in the interagency Federal Working Group on Greenhouse Gas Accounting and Reporting that develops recommendations to the Council on Environmental Quality (CEQ) for the Federal Greenhouse Gas Accounting and Reporting Guidance. (4) As the focus continues to shift from measuring emissions (completing inventories) to mitigating emissions (achieving reductions), FEMP is developing a strategic planning framework and resources for agencies to prioritize among a variety of options for mitigating their GHG emissions, so that they achieve their reduction goals in the most cost-effective manner. These resources will help agencies analyze their high-quality inventories to make strategic decisions about where to use limited resources to have the greatest impact on reducing emissions. Greenhouse gases trap heat in the lower atmosphere, warming the earth's surface temperature in a natural process known as the 'greenhouse effect.' GHGs include carbon dioxide (CO{sub 2

  8. Overview of NASA's Microgravity Materials Research Program

    Science.gov (United States)

    Downey, James Patton; Grugel, Richard

    2012-01-01

    The NASA microgravity materials program is dedicated to conducting microgravity experiments and related modeling efforts that will help us understand the processes associated with the formation of materials. This knowledge will help improve ground based industrial production of such materials. The currently funded investigations include research on the distribution of dopants and formation of defects in semiconductors, transitions between columnar and dendritic grain morphology, coarsening of phase boundaries, competition between thermally and kinetically favored phases, and the formation of glassy vs. crystalline material. NASA microgravity materials science investigators are selected for funding either through a proposal in response to a NASA Research Announcement or by participation in a team proposing to a foreign agency research announcement. In the latter case, a US investigator participating in a successful proposal to a foreign agency can then apply to NASA for funding of an unsolicited proposal. The program relies on cooperation with other aerospace partners from around the world. The ISS facilities used for these investigations are provided primarily by partnering with foreign agencies and in most cases the US investigators are working as a part of a larger team studying a specific area of materials science. The following facilities are to be utilized for the initial investigations. The ESA provided Low Gradient Facility and the Solidification and Quench Inserts to the Materials Research Rack/Materials Science Laboratory are to be used primarily for creating bulk samples that are directionally solidified or quenched from a high temperature melt. The CNES provided DECLIC facility is used to observe morphological development in transparent materials. The ESA provided Electro-Magnetic Levitator (EML) is designed to levitate, melt and then cool samples in order to study nucleation behavior. The facility provides conditions in which nucleation of the solid is

  9. Overview of Japanese Earth observation programs

    Science.gov (United States)

    Shimoda, Haruhisa; Honda, Yoshiaki

    2017-09-01

    Five programs, i.e. ASTER, GOSAT, GCOM-W1, GPM and ALOS-2 are going on in Japanese Earth Observation programs. ASTER has lost its short wave infrared channels. AMSR-E stopped its operation, but it started its operation from Sep. 2012 with slow rotation speed. It finally stopped on December 2015. GCOM-W1 was launched on 18, May, 2012 and is operating well as well as GOSAT. ALOS (Advanced Land Observing Satellite) was successfully launched on 24th Jan. 2006. ALOS carries three instruments, i.e., PRISM (Panchromatic Remote Sensing Instrument for Stereo Mapping), AVNIR-2 (Advanced Visible and Near Infrared Radiometer), and PALSAR (Phased Array L band Synthetic Aperture Radar). Unfortunately, ALOS has stopped its operation on 22nd, April, 2011 by power loss. GOSAT (Greenhouse Gas Observation Satellite) was successfully launched on 29, January, 2009. GOSAT carries 2 instruments, i.e. a green house gas sensor (TANSO-FTS) and a cloud/aerosol imager (TANSO-CAI). The main sensor is a Fourier transform spectrometer (FTS) and covers 0.76 to 15 μm region with 0.2 to 0.5 cm-1 resolution. SMILES (Superconducting Millimeter wave Emission Spectrometer) was launched on September 2009 to ISS and started the observation, but stopped its operation on April 2010. GPM (Global Precipitation Mission) core satellite was launched on Feb. 2014. GPM is a joint project with NASA and carries two instruments. JAXA has developed DPR (Dual frequency Precipitation Radar) which is a follow on of PR on TRMM. ALOS F/O satellites are divided into two satellites, i.e. SAR and optical satellites. The first one of ALOS F/O is called ALOS 2 and carries L-band SAR. It was launched on May 2014. JAXA is planning to launch follow on of optical sensors. It is now called Advanced Optical Satellite and the planned launch date is fiscal 2019. Other future satellites are GCOM-C1 (ADEOS-2 follow on), GOSAT-2 and EarthCare. GCOM-C1 will be launched on 2017 and GOSAT-2 will be launched on fiscal 2018. Another project

  10. Recirculating aquaculture production systems : an overview of different components, management, economics and technology

    NARCIS (Netherlands)

    Kals, J.

    2004-01-01

    Report of a literature study on Recirculating aquaculture production systems executed within the MRG ercirculation program. The report gives an overview of different components, management, economics and technology and is made by the Netherlands Institute for Fisheries Research (RIVO).

  11. Wind Energy Program overview, Fiscal year 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    Wind energy research has two goals: (1) to gain a fundamental understanding of the interactions between wind and wind turbines; and (2) to develop the basic design tools required to develop advanced technologies. A primary objective of applied research activities is to develop sophisticated computer codes and integrate them into the design, testing, and evaluation of advanced components and systems, Computer models have become a necessary and integral part of developing new high-tech wind energy systems. A computer-based design strategy allows designers to model different configurations and explore new designs before building expensive hardware. DOE works closely with utilities and the wind industry in setting its applied research agenda. As soon as research findings become available, the national laboratories transfer the information to industry through workshops, conferences, and publications.

  12. Brazilian Air Force aircraft structural integrity program: An overview

    Directory of Open Access Journals (Sweden)

    Alberto W. S. Mello Junior

    2009-01-01

    Full Text Available This paper presents an overview of the activities developed by the Structural Integrity Group at the Institute of Aeronautics and Space - IAE, Brazil, as well as the status of ongoing work related to the life extension program for aircraft operated by the Brazilian Air Force BAF. The first BAF-operated airplane to undergo a DTA-based life extension was the F-5 fighter, in the mid 1990s. From 1998 to 2001, BAF worked on a life extension project for the BAF AT- 26 Xavante trainer. All analysis and tests were performed at IAE. The fatigue critical locations (FCLs were presumed based upon structural design and maintenance data and also from exchange of technical information with other users of the airplane around the world. Following that work, BAF started in 2002 the extension of the operational life of the BAF T-25 “Universal”. The T-25 is the basic training airplane used by AFA - The Brazilian Air Force Academy. This airplane was also designed under the “safe-life” concept. As the T-25 fleet approached its service life limit, the Brazilian Air Force was questioning whether it could be kept in flight safely. The answer came through an extensive Damage Tolerance Analysis (DTA program, briefly described in this paper. The current work on aircraft structural integrity is being performed for the BAF F-5 E/F that underwent an avionics and weapons system upgrade. Along with the increase in weight, new configurations and mission profiles were established. Again, a DTA program was proposed to be carried out in order to establish the reliability of the upgraded F-5 fleet. As a result of all the work described, the BAF has not reported any accident due to structural failure on aircraft submitted to Damage Tolerance Analysis.

  13. NASA's Earth Science Flight Program overview

    Science.gov (United States)

    Neeck, Steven P.; Volz, Stephen M.

    2011-11-01

    NASA's Earth Science Division (ESD) conducts pioneering work in Earth system science, the interdisciplinary view of Earth that explores the interaction among the atmosphere, oceans, ice sheets, land surface interior, and life itself that has enabled scientists to measure global and climate changes and to inform decisions by governments, organizations, and people in the United States and around the world. The ESD makes the data collected and results generated by its missions accessible to other agencies and organizations to improve the products and services they provide, including air quality indices, disaster management, agricultural yield projections, and aviation safety. In addition to four missions now in development and 14 currently operating on-orbit, the ESD is now developing the first tier of missions recommended by the 2007 Earth Science Decadal Survey and is conducting engineering studies and technology development for the second tier. Furthermore, NASA's ESD is planning implementation of a set of climate continuity missions to assure availability of key data sets needed for climate science and applications. These include a replacement for the Orbiting Carbon Observatory (OCO), OCO-2, planned for launch in 2013; refurbishment of the SAGE III atmospheric chemistry instrument to be hosted by the International Space Station (ISS) as early as 2014; and the Gravity Recovery and Climate Experiment Follow-On (GRACE FO) mission scheduled for launch in 2016. The new Earth Venture (EV) class of missions is a series of uncoupled, low to moderate cost, small to medium-sized, competitively selected, full orbital missions, instruments for orbital missions of opportunity, and sub-orbital projects.

  14. Exploration Medical System Trade Study Tools Overview

    Science.gov (United States)

    Mindock, J.; Myers, J.; Latorella, K.; Cerro, J.; Hanson, A.; Hailey, M.; Middour, C.

    2018-01-01

    ExMC is creating an ecosystem of tools to enable well-informed medical system trade studies. The suite of tools address important system implementation aspects of the space medical capabilities trade space and are being built using knowledge from the medical community regarding the unique aspects of space flight. Two integrating models, a systems engineering model and a medical risk analysis model, tie the tools together to produce an integrated assessment of the medical system and its ability to achieve medical system target requirements. This presentation will provide an overview of the various tools that are a part of the tool ecosystem. Initially, the presentation's focus will address the tools that supply the foundational information to the ecosystem. Specifically, the talk will describe how information that describes how medicine will be practiced is captured and categorized for efficient utilization in the tool suite. For example, the talk will include capturing what conditions will be planned for in-mission treatment, planned medical activities (e.g., periodic physical exam), required medical capabilities (e.g., provide imaging), and options to implement the capabilities (e.g., an ultrasound device). Database storage and configuration management will also be discussed. The presentation will include an overview of how these information tools will be tied to parameters in a Systems Modeling Language (SysML) model, allowing traceability to system behavioral, structural, and requirements content. The discussion will also describe an HRP-led enhanced risk assessment model developed to provide quantitative insight into each capability's contribution to mission success. Key outputs from these various tools, to be shared with the space medical and exploration mission development communities, will be assessments of medical system implementation option satisfaction of requirements and per-capability contributions toward achieving requirements.

  15. AN OVERVIEW OF THE ROMANIAN EDUCATION SYSTEM

    Directory of Open Access Journals (Sweden)

    CLAUDIA ANDREEA UREAN

    2017-06-01

    Full Text Available A foundation of human development and one of the most powerful instruments in the fight against poverty, education is the premise in building a solid construction. Education arms people with knowledge on social development and progress. An extension of our latest work “Romanian education system – descriptive analysis”, the aim of the present research is to offer an overview of the Romanian education system which has passed through many radical reforms over the last 27 years. The first part of our research presents some studies identified in the specialized literature which analyze the Romanian education system. The state of the art is followed by descriptive statistics regarding the enrolled population trends in Romania - by urban and rural areas, by counties and by gender-during the period 1995-2015; the enrollment rate in formal education and the dropout rate. The last part of our research represents the conclusions section.

  16. Overview of the COMPASS CODAC system

    Energy Technology Data Exchange (ETDEWEB)

    Hron, M., E-mail: mhron@seznam.cz [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Praha 8 (Czech Republic); Janky, F. [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Praha 8 (Czech Republic); Department of Surface and Plasma Science, Faculty of Mathematics and Physics, Charles University in Prague, V Holešovičkách 2, 180 00 Praha 8 (Czech Republic); Pipek, J. [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Praha 8 (Czech Republic); Sousa, J.; Carvalho, B.B.; Fernandes, H. [Associação EURATOM/IST, Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa (Portugal); Vondracek, P. [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Praha 8 (Czech Republic); Department of Surface and Plasma Science, Faculty of Mathematics and Physics, Charles University in Prague, V Holešovičkách 2, 180 00 Praha 8 (Czech Republic); Cahyna, P.; Urban, J. [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Praha 8 (Czech Republic); Paprok, R. [Institute of Plasma Physics AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Praha 8 (Czech Republic); Department of Surface and Plasma Science, Faculty of Mathematics and Physics, Charles University in Prague, V Holešovičkách 2, 180 00 Praha 8 (Czech Republic); and others

    2014-03-15

    Highlights: • Overview of the Control, Data Acquisition, and Communication system (CODAC) on the COMPASS tokamak. • Set-up of CODAC hardware, software implementation, and communication tools. • Feedback control of COMPASS plasma using the MARTe framework. • Actuators, data sources, and data acquisition systems employed on COMPASS. • Communication links and protocols used within the COMPASS CODAC. - Abstract: This paper presents an overview of the Control, Data Acquisition, and Communication system (CODAC) at the COMPASS tokamak: the hardware set-up, software implementation, and communication tools are described. The diagnostics and the data acquisition are tailored for high spatial and temporal resolution required by the COMPASS physics programme, which aims namely at studies of the plasma edge, pedestal, and Scrape-off-Layer (SOL). Studies of instabilities and turbulence are also an integral part of the programme. Therefore, the data acquisition consists of more than 1000 channels, sampled at rates from 500 kS/s up to 2 GS/s. Presently, the feedback system controls the plasma position and shape, plasma current, and density and it includes 32 analogue input channels as well as 1 digital input/output channel and 8 analogue outputs. The feedback control runs within the Multi-threaded Application Real-Time executor (MARTe) framework with two threads, a 500 μs cycle to control slow systems and a 50 μs cycle to control the fast feedback power supplies for plasma position control. In this paper, special attention is paid to the links between the systems, to the hardware and software connections, and to the communication. The hardware part is described, the software framework is addressed, and the particular implementation – the dedicated software modules, communication protocols, and links to the database are described.

  17. Los Alamos safeguards program overview and NDA in safeguards

    International Nuclear Information System (INIS)

    Keepin, G.R.

    1988-01-01

    Over the years the Los Alamos safeguards program has developed, tested, and implemented a broad range of passive and active nondestructive analysis (NDA) instruments (based on gamma and x-ray detection and neutron counting) that are now widely employed in safeguarding nuclear materials of all forms. Here very briefly, the major categories of gamma ray and neutron based NDA techniques, give some representative examples of NDA instruments currently in use, and cite a few notable instances of state-of-the-art NDA technique development. Historical aspects and a broad overview of the safeguards program are also presented

  18. Micro-system inertial sensing technology overview.

    Energy Technology Data Exchange (ETDEWEB)

    Allen, James Joe

    2009-02-01

    The purpose of this report is to provide an overview of Micro-System technology as it applies to inertial sensing. Transduction methods are reviewed with capacitance and piezoresistive being the most often used in COTS Micro-electro-mechanical system (MEMS) inertial sensors. Optical transduction is the most recent transduction method having significant impact on improving sensor resolution. A few other methods are motioned which are in a R&D status to hopefully allow MEMS inertial sensors to become viable as a navigation grade sensor. The accelerometer, gyroscope and gravity gradiometer are the type of inertial sensors which are reviewed in this report. Their method of operation and a sampling of COTS sensors and grade are reviewed as well.

  19. Battery Management System Hardware Concepts: An Overview

    Directory of Open Access Journals (Sweden)

    Markus Lelie

    2018-03-01

    Full Text Available This paper focuses on the hardware aspects of battery management systems (BMS for electric vehicle and stationary applications. The purpose is giving an overview on existing concepts in state-of-the-art systems and enabling the reader to estimate what has to be considered when designing a BMS for a given application. After a short analysis of general requirements, several possible topologies for battery packs and their consequences for the BMS’ complexity are examined. Four battery packs that were taken from commercially available electric vehicles are shown as examples. Later, implementation aspects regarding measurement of needed physical variables (voltage, current, temperature, etc. are discussed, as well as balancing issues and strategies. Finally, safety considerations and reliability aspects are investigated.

  20. Low-level waste management program: technical program overview

    International Nuclear Information System (INIS)

    Lowrie, R.S.

    1981-01-01

    The mission of the technical program is to develop the technology component of the Department of Energy's Low-Level Waste Management Program and to manage research and development, demonstration, and documentation of the technical aspects of the program. Some of the major technology objectives are: develop and demonstrate techniques for waste generation reduction; develop and demonstrate waste treatment, handling and packaging techniques; develop and demonstrate the technology for greater confinement; and develop the technology for remedial action at existing sites. In addition there is the technology transfer objective which is to compile and issue a handbook documenting the technology for each of the above technology objectives

  1. YALINA facility a sub-critical Accelerator- Driven System (ADS) for nuclear energy research facility description and an overview of the research program (1997-2008).

    Energy Technology Data Exchange (ETDEWEB)

    Gohar, Y.; Smith, D. L.; Nuclear Engineering Division

    2010-04-28

    The YALINA facility is a zero-power, sub-critical assembly driven by a conventional neutron generator. It was conceived, constructed, and put into operation at the Radiation Physics and Chemistry Problems Institute of the National Academy of Sciences of Belarus located in Minsk-Sosny, Belarus. This facility was conceived for the purpose of investigating the static and dynamic neutronics properties of accelerator driven sub-critical systems, and to serve as a neutron source for investigating the properties of nuclear reactions, in particular transmutation reactions involving minor-actinide nuclei. This report provides a detailed description of this facility and documents the progress of research carried out there during a period of approximately a decade since the facility was conceived and built until the end of 2008. During its history of development and operation to date (1997-2008), the YALINA facility has hosted several foreign groups that worked with the resident staff as collaborators. The participation of Argonne National Laboratory in the YALINA research programs commenced in 2005. For obvious reasons, special emphasis is placed in this report on the work at YALINA facility that has involved Argonne's participation. Attention is given here to the experimental program at YALINA facility as well as to analytical investigations aimed at validating codes and computational procedures and at providing a better understanding of the physics and operational behavior of the YALINA facility in particular, and ADS systems in general, during the period 1997-2008.

  2. Fuel fabrication instrumentation and control system overview

    International Nuclear Information System (INIS)

    Bennett, D.W.; Fritz, R.L.

    1980-10-01

    A process instrumentation and control system is being developed for automated fabrication of breeder reactor fuel at the Hanford Engineering Development Laboratory (HEDL) in Richland, Washington. The basic elements of the control system are a centralized computer system linked to distributed local computers, which direct individual process applications. The control philosophy developed for the equipment automation program stresses system flexibility and inherent levels of redundant control capabilities. Four different control points have been developed for each unit process operation

  3. The European Activation System. EASY-2001 overview

    International Nuclear Information System (INIS)

    Forrest, R.A.

    2001-03-01

    This document gives an overview of the European Activation System (EASY) as released in 2001. EASY-2001 consists of a wide range of codes, data and documentation all aimed at satisfying the objective of calculating the response of materials irradiated in a neutron flux. It is designed to investigate fusion devices that will act as intense sources of high energy (14 MeV) neutrons and cause significant activation of the surrounding materials. However, the very general nature of the calculational method and the data libraries means that it is applicable (with some reservations) to all situations (e.g. fission reactors or neutron sources) where materials are exposed to neutrons below 20 MeV

  4. System programming languages

    OpenAIRE

    Šmit, Matej

    2016-01-01

    Most operating systems are written in the C programming language. Similar is with system software, for example, device drivers, compilers, debuggers, disk checkers, etc. Recently some new programming languages emerged, which are supposed to be suitable for system programming. In this thesis we present programming languages D, Go, Nim and Rust. We defined the criteria which are important for deciding whether programming language is suitable for system programming. We examine programming langua...

  5. An Overview of Residential Ventilation Activities in the Building America Program (Phase I)

    Energy Technology Data Exchange (ETDEWEB)

    Barley, D.

    2001-05-21

    This report provides an overview of issues involved in residential ventilation; provides an overview of the various ventilation strategies being evaluated by the five teams, or consortia, currently involved in the Building America Program; and identifies unresolved technical issues.

  6. An overview of the Cooperative IASCC Research (CIR) program

    International Nuclear Information System (INIS)

    Pathania, R.; Gott, K.; Scott, P.

    2007-01-01

    Irradiation-Assisted Stress Corrosion Cracking (IASCC) has affected reactor core internal structures fabricated from austenitic stainless steels in both Pressurized Water Reactors (PWR) and Boiling Water Reactors (BWR). The Cooperative IASCC Research (CIR) Program is an international research effort designed to address irradiation-assisted stress corrosion cracking (IASCC) in light water reactor (LWR) components. The objectives of the CIR program are to develop a mechanistic understanding of IASCC initiation and crack growth, to derive a predictive model of IASCC, if possible based on a mechanistic understanding, and thus to identify possible countermeasures to IASCC. It complements other more applied programs by concentrating on the underlying physical causes of IASCC. This paper provides an overview of the current status and achievements of the CIR program, which has been running since 1995. Two phases of the program have been completed and a final extension program is in progress which is scheduled to finish in 2008. The extent to which the CIR program has met its objectives, or will meet them with its current plans extending into 2008, is assessed. (author)

  7. Philosophy and overview of the INEL waste management program

    International Nuclear Information System (INIS)

    Gertz, C.P.; Whitsett, J.B.; Hamric, J.P.

    1986-01-01

    The INEL philosophy of ''get the job done; do it right--the first time'' is described as it applies to all phases of waste management activities. In addition, an overview of INEL's waste management programs and projects--low-level waste management operations and technology development; transuranic waste management operations and technology development; high-level waste management operations and technology development; spent fuel storage operations and equipment/technology development; transportation operations, technology development, and prototype cask procurements--are discussed. Emphasis is placed on the application of the INEL philosophy to the successful initiation and continuation of INEL waste management activities

  8. SHARK-NIR system design analysis overview

    Science.gov (United States)

    Viotto, Valentina; Farinato, Jacopo; Greggio, Davide; Vassallo, Daniele; Carolo, Elena; Baruffolo, Andrea; Bergomi, Maria; Carlotti, Alexis; De Pascale, Marco; D'Orazi, Valentina; Fantinel, Daniela; Magrin, Demetrio; Marafatto, Luca; Mohr, Lars; Ragazzoni, Roberto; Salasnich, Bernardo; Verinaud, Christophe

    2016-08-01

    In this paper, we present an overview of the System Design Analysis carried on for SHARK-NIR, the coronagraphic camera designed to take advantage of the outstanding performance that can be obtained with the FLAO facility at the LBT, in the near infrared regime. Born as a fast-track project, the system now foresees both coronagraphic direct imaging and spectroscopic observing mode, together with a first order wavefront correction tool. The analysis we here report includes several trade-offs for the selection of the baseline design, in terms of optical and mechanical engineering, and the choice of the coronagraphic techniques to be implemented, to satisfy both the main scientific drivers and the technical requirements set at the level of the telescope. Further care has been taken on the possible exploitation of the synergy with other LBT instrumentation, like LBTI. A set of system specifications is then flown down from the upper level requirements to finally ensure the fulfillment of the science drivers. The preliminary performance budgets are presented, both in terms of the main optical planes stability and of the image quality, including the contributions of the main error sources in different observing modes.

  9. Conformal Ablative Thermal Protection System for Planetary and Human Exploration Missions: Overview of the Technology Maturation Efforts Funded by NASA's Game Changing Development Program

    Science.gov (United States)

    Beck, Robin A.; Arnold, James O.; Gasch, Matthew J.; Stackpoole, Margaret M.; Fan, Wendy; Szalai, Christine E.; Wercinski, Paul F.; Venkatapathy, Ethiraj

    2012-01-01

    The Office of Chief Technologist (OCT), NASA has identified the need for research and technology development in part from NASA's Strategic Goal 3.3 of the NASA Strategic Plan to develop and demonstrate the critical technologies that will make NASA's exploration, science, and discovery missions more affordable and more capable. Furthermore, the Game Changing Development Program (GCDP) is a primary avenue to achieve the Agency's 2011 strategic goal to "Create the innovative new space technologies for our exploration, science, and economic future." In addition, recently released "NASA space Technology Roadmaps and Priorities," by the National Research Council (NRC) of the National Academy of Sciences stresses the need for NASA to invest in the very near term in specific EDL technologies. The report points out the following challenges (Page 2-38 of the pre-publication copy released on February 1, 2012): Mass to Surface: Develop the ability to deliver more payload to the destination. NASA's future missions will require ever-greater mass delivery capability in order to place scientifically significant instrument packages on distant bodies of interest, to facilitate sample returns from bodies of interest, and to enable human exploration of planets such as Mars. As the maximum mass that can be delivered to an entry interface is fixed for a given launch system and trajectory design, the mass delivered to the surface will require reduction in spacecraft structural mass; more efficient, lighter thermal protection systems; more efficient lighter propulsion systems; and lighter, more efficient deceleration systems. Surface Access: Increase the ability to land at a variety of planetary locales and at a variety of times. Access to specific sites can be achieved via landing at a specific location (s) or transit from a single designated landing location, but it is currently infeasible to transit long distances and through extremely rugged terrain, requiring landing close to the

  10. SDR (Systems Directed Reading): An Overview.

    Science.gov (United States)

    Baugo Community Schools, Elkhart, IN.

    The objective of this project for kindergarten through fifth grade is to interest public and private educational institutions in the systematization of elementary school reading programs. Facets of Systems Directed Reading (SDR) include the use of a differentiated staffing pattern; experienced language arts unit leaders guiding and directing all…

  11. Joint Polar Satellite System Common Ground System Overview

    Science.gov (United States)

    Jamilkowski, M. L.; Smith, D. C.

    2011-12-01

    segments to implement proper security controls and directly manage integration, test & verification of product segments into the system. O&S operates the JPSS CGS, performs all mission operations and provides onsite support & logistics. O&S responsibilities range from developing, training, maintaining, and executing operational procedures; tracking/resolving anomalies; scheduling, measuring, trending and tracking all Program resources; to securing all assets. O&S has operated/supported the NPP C3S & IDPS baselines since Oct 2008 and Jul 2009 deliveries, respectively. Sustainment updates & maintains H/W & S/W baselines at Raytheon facilities in Colorado & Nebraska. They have done this for the NPP C3S & IDPS baselines since Oct 2008 and Jul 2009, respectively. This presentation will also give an overview of the JPSS CGS ground architecture features & enhancements for the JPSS (post-NPP) era. These include: C3S-provided space-to-ground connectivity, reliable/secure data delivery and insight/oversight of total operations; added ground receptor sites to reduce data latency; delivery of added sensor data products from NPP-like and additional JPSS sensors and expansion to 2 more Centrals (FNMOC & NAVO). The IDPS will act as a buffer to minimize changes in how users request/receive data products.

  12. The NASA Electronic Parts and Packaging (NEPP) Program: NEPP Overview - Automotive Electronics

    Science.gov (United States)

    LaBel, Kenneth A.; Sampson, Michael J.

    2016-01-01

    The results of NASAs studies into the appropriateness of using U.S. Automotive electronic parts in NASA spaceflight systems will be presented. The first part of the presentation provides an overview of the United States Automotive Electronics Council's AECQ standardization program, the second part provides a summary of the results of NASA's procurement and testing experiences and other lessons learned along with preliminary test results.

  13. The masticatory system--an overview.

    Science.gov (United States)

    Soboļeva, Una; Lauriņa, Lija; Slaidiņa, Anda

    2005-01-01

    Masticatory muscle physiology has been evaluated mostly from electromyographic recordings. However, electromyography coupled with jaw-tracking devices has provided much more information of the correlation between jaw movements and muscle activity. Knowledge of how the mandible moves during mastication has greatly influenced procedures in clinical dentistry. The aim of this overview is to give basic description of the classical studies of the physiology, function and neural control principles of the mastication. Mastication is the action of breaking down of food, preparatory to deglutition. This breaking-down action is highly organized complex of neuromuscular and digestive activities. The duration and forces developed in the power stroke vary within and between individuals and for the type of the food being chewed. It has been suggested that the observation of masticatory movements may be of diagnostic value for assessing disorders of the stomatognathic system, but there is not clear evidence to show significant differences. The action of masticatory muscles during chewing varies between subjects in amplitude, onset timing, and duration of the chewing cycle. Since tooth guidance has an enormous influence on muscle activity during chewing and swallowing, it is advisable to make restorations compatible with the functional movement patterns of the patient rather than expect the patterns of the mastication to adapt to the new made restorations.

  14. An Overview of Liquid Fluoride Salt Heat Transport Systems

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David Eugene [ORNL; Cetiner, Sacit M [ORNL

    2010-09-01

    Heat transport is central to all thermal-based forms of electricity generation. The ever increasing demand for higher thermal efficiency necessitates power generation cycles transitioning to progressively higher temperatures. Similarly, the desire to provide direct thermal coupling between heat sources and higher temperature chemical processes provides the underlying incentive to move toward higher temperature heat transfer loops. As the system temperature rises, the available materials and technology choices become progressively more limited. Superficially, fluoride salts at {approx}700 C resemble water at room temperature being optically transparent and having similar heat capacity, roughly three times the viscosity, and about twice the density. Fluoride salts are a leading candidate heat-transport material at high temperatures. Fluoride salts have been extensively used in specialized industrial processes for decades, yet they have not entered widespread deployment for general heat transport purposes. This report does not provide an exhaustive screening of potential heat transfer media and other high temperature liquids such as alkali metal carbonate eutectics or chloride salts may have economic or technological advantages. A particular advantage of fluoride salts is that the technology for their use is relatively mature as they were extensively studied during the 1940s-1970s as part of the U.S. Atomic Energy Commission's program to develop molten salt reactors (MSRs). However, the instrumentation, components, and practices for use of fluoride salts are not yet developed sufficiently for commercial implementation. This report provides an overview of the current understanding of the technologies involved in liquid salt heat transport (LSHT) along with providing references to the more detailed primary information resources. Much of the information presented here derives from the earlier MSR program. However, technology has evolved over the intervening years

  15. Updated overview of the Tevatron control system

    International Nuclear Information System (INIS)

    Lucas, P.

    1987-10-01

    A single unified control system is used for all of the Fermilab accelerators and storage rings, from the LINAC to the Tevatron and antiproton source. A review of the general features is given - these include a 'host' system consisting of a number of minicomputers integrated with many distributed microprocessors in a variety of subsystems, usage of an in-house developed protocol, GAS, for communication between the two classes of machines, and a Parameter Page program, designed in conjunction with the system database, which allows a wide variety of quantities to be read and set in a coherent fashion. Recent developments include the implementation of a block transfer and 'fast time plot' facility through CAMAC, inclusion of several new computers in the host, a better understanding of system throughput, greatly improved reliability, advent of programs which sequence a large number of independent operations, and the construction of new hardware subsystems. Possible future system upgrades will be briefly presented. A summary of the utilization of a quite large software staff, at a time when the system is no longer under construction, will be discussed

  16. Expert Systems: An Overview for Teacher-Librarians.

    Science.gov (United States)

    Orwig, Gary; Barron, Ann

    1992-01-01

    Provides an overview of expert systems for teacher librarians. Highlights include artificial intelligence and expert systems; the development of the MYCIN medical expert system; rule-based expert systems; the use of expert system shells to develop a specific system; and how to select an appropriate application for an expert system. (11 references)…

  17. Fennec - The Saharan Climate System: Project Overview

    Science.gov (United States)

    Washington, Richard; Flamant, Cyrille; Parker, Doug; Marsham, Marsham; McQuaid, Jim; Brindley, Helen; Todd, Martin; Highwood, Ellie; Chaboureau, Jean-Pierre; Kocha, Cecile; Bechir, Mohamed; Saci, Azzedine

    2013-04-01

    The central Sahara forms an important part of the global climate system. During the northern summer months, the Saharan Heat Low (SHL), caused by intense solar heating, develops over a huge, largely uninhabited expanse of northern Mali, southern Algeria and eastern Mauritania. Dry convection through more than 5000m of the atmosphere, is routine in what is thought to be the deepest such layer on the planet. The SHL also co-locates with the largest loadings of dust anywhere in the Earth's atmosphere, making for a complex yet crucial component of WAM. Much of what is known about the SHL derives from numerical models rather than observations although it is widely accepted that such models show significant systematic errors over the Sahara desert manifested as differences in radiation reaching and leaving the surface, surface temperature, winds, dust and in representation of the boundary layer. In an effort to address the observational deficit in the region, as well as to improve model performance, the Fennec project is a large scale, multi-platform, extended duration observational campaign in the Saharan Heat Low (SHL) region. During the summers of 2011and 2012 a major campaign set about addressing the data deficiency of this important region. The campaign, which involved many more people than are indicated by the authorship of this abstract, featured the use of the instrumented BAe-146 and Falcon aircraft as well as supersite ground-stations both Algeria and Mauritania. The purpose of this overview is to describe project aims, institutional involvement and key elements of the observational campaign, particularly as it relates to the effort to understand dust over the region.

  18. Overview of the tritium system of Ignitor

    International Nuclear Information System (INIS)

    Rizzello, C.; Tosti, S.

    2008-01-01

    Among the recent design activities of the Ignitor program, the analysis of the tritium system has been carried out with the aim to describe the main equipments and the operations needed for supplying the deuterium-tritium mixtures and recovering the plasma exhaust. In fact, the tritium system of Ignitor provides for injecting deuterium-tritium mixtures into the vacuum chamber in order to sustain the fusion reaction: furthermore, it generally manages and controls the tritium and the tritiated materials of the machine fuel cycle. Main functions consist of tritium storage and delivery, tritium injection, tritium recovery from plasma exhaust, treatment of the tritiated wastes, detritiation of the contaminated atmospheres, tritium analysis and accountability. In this work an analysis of the designed tritium system of Ignitor is summarized

  19. Joint Polar Satellite System Common Ground System Overview

    Science.gov (United States)

    Jamilkowski, M. L.; Miller, S. W.; Grant, K. D.

    2012-12-01

    The National Oceanic and Atmospheric Administration (NOAA) and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation civilian weather and environmental satellite system: the Joint Polar Satellite System (JPSS). JPSS will contribute the afternoon orbit component and ground processing system of the restructured National Polar-orbiting Operational Environmental Satellite System (NPOESS). As such, JPSS replaces the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA and the ground processing component of both Polar-orbiting Operational Environmental Satellites and the Defense Meteorological Satellite Program (DMSP) replacement, previously known as the Defense Weather Satellite System (DWSS), managed by the Department of Defense (DoD). The JPSS satellites will carry a suite of sensors designed to collect meteorological, oceanographic, climatological, and solar-geophysical observations of the earth, atmosphere, and space. The ground processing system for JPSS is known as the JPSS Common Ground System (JPSS CGS), and consists of a Command, Control, and Communications Segment (C3S) and an Interface Data Processing Segment (IDPS). Both segments are developed by Raytheon Intelligence and Information Systems (IIS). The C3S currently flies the Suomi National Polar Partnership (Suomi NPP) satellite and transfers mission data from Suomi NPP and between the ground facilities. The IDPS processes Suomi NPP satellite data to provide Environmental Data Records (EDRs) to NOAA and DoD processing centers operated by the United States government. When the JPSS-1 satellite is launched in early 2017, the responsibilities of the C3S and the IDPS will be expanded to support both Suomi NPP and JPSS-1. The JPSS CGS currently provides data processing for Suomi NPP, generating multiple terabytes per day across over two dozen environmental data products; that workload will be multiplied by two when the JPSS-1 satellite is

  20. Physics of the Cosmos (PCOS) Technology Development Program Overview

    Science.gov (United States)

    Pham, B. Thai; Clampin, M.; Werneth, R. L.

    2014-01-01

    The Physics of the Cosmos (PCOS) Program Office was established in FY11 and resides at the NASA Goddard Space Flight Center (GSFC). The office serves as the implementation arm for the Astrophysics Division at NASA Headquarters for PCOS Program related matters. We present an overview of the Program’s technology management activities and the Program’s technology development portfolio. We discuss the process for addressing community-provided technology needs and the Technology Management Board (TMB)-vetted prioritization and investment recommendations. This process improves the transparency and relevance of technology investments, provides the community a voice in the process, and leverages the technology investments of external organizations by defining a need and a customer. Goals for the PCOS Program envisioned by the National Research Council’s (NRC) “New Worlds, New Horizons in Astronomy and Astrophysics” (NWNH) Decadal Survey report include science missions and technology development for dark energy, gravitational waves, X-ray, and inflation probe science.

  1. 32 CFR 701.116 - PA systems of records notices overview.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false PA systems of records notices overview. 701.116... DEPARTMENT OF THE NAVY DOCUMENTS AFFECTING THE PUBLIC DON Privacy Program § 701.116 PA systems of records... provisions of the PA. (Note: The “ability to retrieve” is not sufficient to warrant the establishment of a PA...

  2. The Army Selected Reserve Dental Readiness System (ASDRS): Historical Overview, Assessment and Recommendations

    Science.gov (United States)

    2012-05-28

    and the benefits of obtaining dental sealants . 2) Information on how to sign up for the TDP insurance program to achieve maximum dental health...The Army Selected Reserve Dental Readiness System (ASDRS): Historical Overview, Assessment and Recommendations by Colonel...Paper 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER The Army Selected Reserve Dental Readiness System (ASDRS

  3. An overview of solution methods for multi-objective mixed integer linear programming programs

    DEFF Research Database (Denmark)

    Andersen, Kim Allan; Stidsen, Thomas Riis

    Multiple objective mixed integer linear programming (MOMIP) problems are notoriously hard to solve to optimality, i.e. finding the complete set of non-dominated solutions. We will give an overview of existing methods. Among those are interactive methods, the two phases method and enumeration...... methods. In particular we will discuss the existing branch and bound approaches for solving multiple objective integer programming problems. Despite the fact that branch and bound methods has been applied successfully to integer programming problems with one criterion only a few attempts has been made...... to solve MOMIP problems....

  4. Programming languages and operating systems used in data base systems

    International Nuclear Information System (INIS)

    Radulescu, T.G.

    1977-06-01

    Some apsects of the use of the programming languages and operating systems in the data base systems are presented. There are four chapters in this paper. In the first chapter we present some generalities about the programming languages. In the second one we describe the use of the programming languages in the data base systems. A classification of the programming languages used in data base systems is presented in the third one. An overview of the operating systems is made in the last chapter. (author)

  5. Nevada Nuclear Waste Storage Investigations Quality-Assurance Program Plan: management and overview

    International Nuclear Information System (INIS)

    1981-10-01

    This Quality Assurance Program Plan (QAPP) defines the quality assurance program in effect for those activities of the Nevada Nuclear Waste Storage (NNWSI) that are directly controlled by: DOE/NV, the Technical Overview Contractor, and the Quality Assurance Overview Contractor. It is intended as a supplement to the NNWSI-QAP

  6. Overview of the U.S. Department of Energy's Isotope Programs

    International Nuclear Information System (INIS)

    Carty, J.

    2004-01-01

    This presentation provides an overview of the U.S. Department of Energy's Isotopes Program. The charter of the Isotope Programs covers the production and sale of radioactive and stable isotopes, associated byproducts, surplus materials, and related isotope services

  7. Photovoltaic systems. Program summary

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-12-01

    Each of the Department of Energy's Photovoltaic Systems Program projects funded and/or in existence during fiscal year 1978 (October 1, 1977 through September 30, 1978) are described. The project sheets list the contractor, principal investigator, and contract number and funding and summarize the programs and status. The program is divided into various elements: program assessment and integration, research and advanced development, technology development, system definition and development, system application experiments, and standards and performance criteria. (WHK)

  8. Characterization analysis database system (CADS). A system overview

    International Nuclear Information System (INIS)

    1997-12-01

    The CADS database is a standardized, quality-assured, and configuration-controlled data management system developed to assist in the task of characterizing the DOE surplus HEU material. Characterization of the surplus HEU inventory includes identifying the specific material; gathering existing data about the inventory; defining the processing steps that may be necessary to prepare the material for transfer to a blending site; and, ultimately, developing a range of the preliminary cost estimates for those processing steps. Characterization focuses on producing commercial reactor fuel as the final step in material disposition. Based on the project analysis results, the final determination will be made as to the viability of the disposition path for each particular item of HEU. The purpose of this document is to provide an informational overview of the CADS database, its evolution, and its current capabilities. This document describes the purpose of CADS, the system requirements it fulfills, the database structure, and the operational guidelines of the system

  9. Digital Avionics Information System (DAIS): Life Cycle Cost Impact Modeling System (LCCIM)--A Managerial Overview. Final Report.

    Science.gov (United States)

    Goclowski, John C.; Baran, H. Anthony

    This report gives a managerial overview of the Life Cycle Cost Impact Modeling System (LCCIM), which was designed to provide the Air Force with an in-house capability of assessing the life cycle cost impact of weapon system design alternatives. LCCIM consists of computer programs and the analyses which the user must perform to generate input data.…

  10. NASA RPS Program Overview: A Focus on RPS Users

    Science.gov (United States)

    Hamley, John A.; Sutliff, Thomas J.; Sandifer, Carl E., II; Zakrajsek, June F.

    2016-01-01

    The goal of NASA's Radioisotope Power Systems (RPS) Program is to make RPS ready and available to support the exploration of the solar system in environments where the use of conventional solar or chemical power generation is impractical or impossible to meet the needs of the missions. To meet this goal, the RPS Program, working closely with the Department of Energy, performs mission and system studies (such as the recently released Nuclear Power Assessment Study), assesses the readiness of promising technologies to infuse in future generators, assesses the sustainment of key RPS capabilities and knowledge, forecasts and tracks the Programs budgetary needs, and disseminates current information about RPS to the community of potential users. This process has been refined and used to determine the current content of the RPS Programs portfolio. This portfolio currently includes an effort to mature advanced thermoelectric technology for possible integration into an enhanced Multi-Mission Radioisotope Generator (eMMRTG), sustainment and production of the currently deployed MMRTG, and technology investments that could lead to a future Stirling Radioisotope Generator (SRG). This paper describes the program planning processes that have been used, the currently available MMRTG, and one of the potential future systems, the eMMRTG.

  11. Yucca Mountain Project - Science & Technology Radionuclide Absorbers Development Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    Hong-Nian Jow; R.C. Moore; K.B. Helean; S. Mattigod; M. Hochella; A.R. Felmy; J. Liu; K. Rosso; G. Fryxell; J. Krumhansl; Y. Wang

    2005-01-14

    The proposed Yucca Mountain repository is anticipated to be the first facility for long-term disposal of commercial spent nuclear fuel and high-level radioactive waste in the United States. The facility, located in the southern Nevada desert, is currently in the planning stages with initial exploratory excavations completed. It is an underground facility mined into the tuffaceous volcanic rocks that sit above the local water table. The focus of the work described in this paper is the development of radionuclide absorbers or ''getter'' materials for neptunium (Np), iodine (I), and technetium (Tc) for potential deployment in the repository. ''Getter'' materials retard the migration of radionuclides through sorption, reduction, or other chemical and physical processes, thereby slowing or preventing the release and transport of radionuclides. An overview of the objectives and approaches utilized in this work with respect to materials selection and modeling of ion ''getters'' is presented. The benefits of the ''getter'' development program to the United States Department of Energy (US DOE) are outlined.

  12. Overview of U.S. programs for hydrogen from renewables

    International Nuclear Information System (INIS)

    Lewis, M.

    2007-01-01

    This paper discusses US program for hydrogen from renewable energy sources. Renewable energy sources include biomass, wind, solar, hydropower, geothermal and ocean waves. Although nuclear power is not considered renewable, a case can be made that it is, but requires recycling of spent fuel. The paper also discusses hydrogen production, storage and delivery. It discusses fuel cells, safety codes and standards and system analysis

  13. Overview of the Autonomic Nervous System

    Science.gov (United States)

    ... be reversible or progressive. Anatomy of the autonomic nervous system The autonomic nervous system is the part of ... organs they connect with. Function of the autonomic nervous system The autonomic nervous system controls internal body processes ...

  14. Overview of fish immune system and infectious diseases

    Science.gov (United States)

    A brief overview of the fish immune system and the emerging or re-emerging bacterial, viral, parasitic and fungal diseases considered to currently have a negative impact on aquaculture is presented. The fish immune system has evolved with both innate (natural resistance) and adaptive (acquired) immu...

  15. Expert systems as applied to bridges and pavements : an overview.

    Science.gov (United States)

    1986-01-01

    Expert systems is a rapidly emerging new application of computers to aid decision makers in solving problems. This report gives an overview of what expert systems are and of what use they may be to a transportation department. The focus of the applic...

  16. NASA's Radioisotope Power Systems Planning and Potential Future Systems Overview

    Science.gov (United States)

    Zakrajsek, June F.; Woerner, Dave F.; Cairns-Gallimore, Dirk; Johnson, Stephen G.; Qualls, Louis

    2016-01-01

    The goal of NASA's Radioisotope Power Systems (RPS) Program is to make RPS ready and available to support the exploration of the solar system in environments where the use of conventional solar or chemical power generation is impractical or impossible to meet the needs of the missions. To meet this goal, the RPS Program, working closely with the Department of Energy, performs mission and system studies (such as the recently released Nuclear Power Assessment Study), assesses the readiness of promising technologies to infuse in future generators, assesses the sustainment of key RPS capabilities and knowledge, forecasts and tracks the Program's budgetary needs, and disseminates current information about RPS to the community of potential users. This process has been refined and used to determine the current content of the RPS Program's portfolio. This portfolio currently includes an effort to mature advanced thermoelectric technology for possible integration into an enhanced Multi-Mission Radioisotope Generator (eMMRTG), sustainment and production of the currently deployed MMRTG, and technology investments that could lead to a future Stirling Radioisotope Generator (SRG). This paper describes the program planning processes that have been used, the currently available MMRTG, and one of the potential future systems, the eMMRTG.

  17. NASA's Radioisotope Power Systems Planning and Potential Future Systems Overview

    Science.gov (United States)

    Zakrajsek, June F.; Woerner, Dave F.; Cairns-Gallimore, Dirk; Johnson, Stephen G.; Qualis, Louis

    2016-01-01

    The goal of NASA's Radioisotope Power Systems (RPS) Program is to make RPS ready and available to support the exploration of the solar system in environments where the use of conventional solar or chemical power generation is impractical or impossible to meet the needs of the missions. To meet this goal, the RPS Program, working closely with the Department of Energy, performs mission and system studies (such as the recently released Nuclear Power Assessment Study), assesses the readiness of promising technologies to infuse in future generators, assesses the sustainment of key RPS capabilities and knowledge, forecasts and tracks the Programs budgetary needs, and disseminates current information about RPS to the community of potential users. This process has been refined and used to determine the current content of the RPS Programs portfolio. This portfolio currently includes an effort to mature advanced thermoelectric technology for possible integration into an enhanced Multi-Mission Radioisotope Generator (eMMRTG), sustainment and production of the currently deployed MMRTG, and technology investments that could lead to a future Stirling Radioisotope Generator (SRG). This paper describes the program planning processes that have been used, the currently available MMRTG, and one of the potential future systems, the eMMRTG.

  18. A worldwide overview of generation IV systems

    International Nuclear Information System (INIS)

    Gauche, F.; Guidez, J.

    2017-01-01

    The Generation IV International Forum (GIF) is an initiative of the American Department of Energy (DOE) whose purpose is to create an international cooperation for proposing and studying a new generation of nuclear reactors. GIF's work began in 2000 and 6 types of reactors were rapidly proposed. This article gives an overview of the work done so far. The sodium-cooled fast reactor is the most advanced concept because there is a technological continuity from the first sodium reactors operating in the fifties. The use of a lead eutectic as heat transfer fluid is hampered by its corrosion power on metals. The molten salt reactor is a very innovative concept that requires a complex and adapting chemistry for the on-line reprocessing. High-temperature and Very-High-Temperature reactors (HTR an VHTR) require materials that can sustain high temperatures. The difficulty to design such materials has hindered the development of this concept. Gas-cooled fast reactors show difficulties to evacuate residual heat in case of accident. The supercritical water-cooled reactor concept wants to take advantage of the increased heat capacity of water in particular conditions. Technical issues like the resistance to high pressure or corrosion or safety issues have delayed this concept so far. (A.C.)

  19. Program management system manual

    International Nuclear Information System (INIS)

    1989-08-01

    OCRWM has developed a program management system (PMS) to assist in organizing, planning, directing and controlling the Civilian Radioactive Waste Management Program. A well defined management system is necessary because: (1) the Program is a complex technical undertaking with a large number of participants, (2) the disposal and storage facilities to be developed by the Program must be licensed by the Nuclear Regulatory Commission (NRC) and hence are subject to rigorous quality assurance (QA) requirements, (3) the legislation mandating the Program creates a dichotomy between demanding schedules of performance and a requirement for close and continuous consultation and cooperation with external entities, (4) the various elements of the Program must be managed as parts of an integrated waste management system, (5) the Program has an estimated total system life cycle cost of over $30 billion, and (6) the Program has a unique fiduciary responsibility to the owners and generators of the nuclear waste for controlling costs and minimizing the user fees paid into the Nuclear Waste Fund. This PMS Manual is designed and structured to facilitate strong, effective Program management by providing policies and requirements for organizing, planning, directing and controlling the major Program functions

  20. Core Science Systems--Mission overview

    Science.gov (United States)

    Gallagher, Kevin T.

    2012-01-01

    The Core Science Systems Mission Area delivers nationally focused Earth systems and information science that provides fundamental research and data that underpins all Mission Areas of the USGS, the USGS Science Strategy, and Presidential, Secretarial, and societal priorities. —Kevin T. Gallagher, Associate Director, Core Science Systems

  1. Exploration Medical System Technical Architecture Overview

    Science.gov (United States)

    Cerro, J.; Rubin, D.; Mindock, J.; Middour, C.; McGuire, K.; Hanson, A.; Reilly, J.; Burba, T.; Urbina, M.

    2018-01-01

    The Exploration Medical Capability (ExMC) Element Systems Engineering (SE) goals include defining the technical system needed to support medical capabilities for a Mars exploration mission. A draft medical system architecture was developed based on stakeholder needs, system goals, and system behaviors, as captured in an ExMC concept of operations document and a system model. This talk will discuss a high-level view of the medical system, as part of a larger crew health and performance system, both of which will support crew during Deep Space Transport missions. Other mission components, such as the flight system, ground system, caregiver, and patient, will be discussed as aspects of the context because the medical system will have important interactions with each. Additionally, important interactions with other aspects of the crew health and performance system are anticipated, such as health & wellness, mission task performance support, and environmental protection. This talk will highlight areas in which we are working with other disciplines to understand these interactions.

  2. An Overview of the EPRI PWR Primary Chemistry Program

    International Nuclear Information System (INIS)

    Perkins, David; Fruzzetti, Keith; Haas, Carey; Wells, Dan

    2012-09-01

    Primary chemistry controls continue to evolve, impacting long term equipment reliability goals, optimized core designs, and radiation dose management practices. Chemistry initiatives include increased primary system pH (T) , zinc injection, and optimization of primary system hydrogen concentration. Nevertheless, utilities are faced with ever changing challenges as fuel vendors continue to optimize core power densities coupled with longer operating cycles and material replacement efforts. These challenges must be collaboratively addressed by the plant chemists, engineers, and operators. Operational chemistry has changed dramatically over the years with increased primary pH (T) programs requiring some utilities to operate with up to 6 ppm lithium or slightly higher. Coupled with primary pH (T) program optimization, are ongoing EPRI research efforts attempting to develop an optimized hydrogen control program balancing material issues associated with primary water stress corrosion cracking (PWSCC) crack growth rate against fuel concerns associated with increased hydrogen concentrations. One of the most significant primary chemistry changes that effectively balances the demands of materials, fuels, chemistry and dose management strategies is zinc injection into the primary coolant. Since 1994 when Farley initiated zinc injection, zinc injection has been successfully injected at over 70 pressurized water reactors world-wide. Combining operational chemistry with shutdown chemistry controls provides the plant chemist with a technically based and balanced approach to fuel and material integrity as well as dose management strategies. Shutdown chemistry has continually evolved since the 1970's when the chemist was primarily concerned with fission products. Now the chemist must manage corrosion product release, and support Outage Management and Radiation Protection through the performance of a controlled shutdown. In part, this change was driven as plant materials evolved

  3. Whole-House Approach Benefits Builders, Buyers, and the Environment Building America Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    None

    2001-05-01

    This document provides an overview of the U.S. Department of Energy's Building America program. Building America works with the residential building industry to develop and implement innovative building processes and technologies.

  4. 75 FR 37771 - Office of Postsecondary Education; Overview Information; Transition Programs for Students with...

    Science.gov (United States)

    2010-06-30

    ... education (or consortia of institutions of higher education), to create or expand high quality, inclusive... DEPARTMENT OF EDUCATION Office of Postsecondary Education; Overview Information; Transition Programs for Students with Intellectual Disabilities Into Higher Education (TPSID)--Model Comprehensive...

  5. Exploration Medical Cap Ability System Engineering Overview

    Science.gov (United States)

    McGuire, K.; Mindock, J.

    2018-01-01

    Deep Space Gateway and Transport missions will change the way NASA currently practices medicine. The missions will require more autonomous capability compared to current low Earth orbit operations. For the medical system, lack of consumable resupply, evacuation opportunities, and real-time ground support are key drivers toward greater autonomy. Recognition of the limited mission and vehicle resources available to carry out exploration missions motivates the Exploration Medical Capability (ExMC) Element's approach to enabling the necessary autonomy. The ExMC Systems Engineering team's mission is to "Define, develop, validate, and manage the technical system design needed to implement exploration medical capabilities for Mars and test the design in a progression of proving grounds." The Element's work must integrate with the overall exploration mission and vehicle design efforts to successfully provide exploration medical capabilities. ExMC is using Model-Based System Engineering (MBSE) to accomplish its integrative goals. The MBSE approach to medical system design offers a paradigm shift toward greater integration between vehicle and the medical system, and directly supports the transition of Earth-reliant ISS operations to the Earth-independent operations envisioned for Mars. This talk will discuss how ExMC is using MBSE to define operational needs, decompose requirements and architecture, and identify medical capabilities needed to support human exploration. How MBSE is being used to integrate across disciplines and NASA Centers will also be described. The medical system being discussed in this talk is one system within larger habitat systems. Data generated within the medical system will be inputs to other systems and vice versa. This talk will also describe the next steps in model development that include: modeling the different systems that comprise the larger system and interact with the medical system, understanding how the various systems work together, and

  6. Seismic safety margins research program. Phase I final report - Overview

    International Nuclear Information System (INIS)

    Smith, P.D.; Dong, R.G.; Bernreuter, D.L.; Bohn, M.P.; Chuang, T.Y.; Cummings, G.E.; Johnson, J.J.; Mensing, R.W.; Wells, J.E.

    1981-04-01

    The Seismic Safety Margins Research Program (SSMRP) is a multiyear, multiphase program whose overall objective is to develop improved methods for seismic safety assessments of nuclear power plants, using a probabilistic computational procedure. The program is being carried out at the Lawrence Livermore National Laboratory and is sponsored by the U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research. Phase I of the SSMRP was successfully completed in January 1981: A probabilistic computational procedure for the seismic risk assessment of nuclear power plants has been developed and demonstrated. The methodology is implemented by three computer programs: HAZARD, which assesses the seismic hazard at a given site, SMACS, which computes in-structure and subsystem seismic responses, and SEISIM, which calculates system failure probabilities and radioactive release probabilities, given (1) the response results of SMACS, (2) a set of event trees, (3) a family of fault trees, (4) a set of structural and component fragility descriptions, and (5) a curve describing the local seismic hazard. The practicality of this methodology was demonstrated by computing preliminary release probabilities for Unit 1 of the Zion Nuclear Power Plant north of Chicago, Illinois. Studies have begun aimed at quantifying the sources of uncertainty in these computations. Numerous side studies were undertaken to examine modeling alternatives, sources of error, and available analysis techniques. Extensive sets of data were amassed and evaluated as part of projects to establish seismic input parameters and to produce the fragility curves. (author)

  7. Intelligent Systems for Aerospace Engineering - An Overview

    National Research Council Canada - National Science Library

    Krishnakumar, K

    2003-01-01

    Intelligent systems are nature-inspired, mathematically sound, computationally intensive problem solving tools and methodologies that have become extremely important for advancing the current trends...

  8. Overview

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    This section describes the activities and accomplishments of the DOE research and development program offices. The Office of Energy Research (ER) manages fundamental science and basic energy research programs in several areas: high-energy physics; nuclear physics; the physical, biological, and mathematical sciences; magnetic fusion energy; and environmental and health effects. ER also supports many scientific user facilities that are used by universities and private-sector researchers and manages the DOE Small Business Innovation Research (SBIR) program and the R ampersand D Laboratory Technology Transfer Program. Brief descriptions of technology transfer accomplishments in each of these areas are given

  9. Human Research Program Advanced Exercise Concepts (AEC) Overview

    Science.gov (United States)

    Perusek, Gail; Lewandowski, Beth; Nall, Marsha; Norsk, Peter; Linnehan, Rick; Baumann, David

    2015-01-01

    Exercise countermeasures provide benefits that are crucial for successful human spaceflight, to mitigate the spaceflight physiological deconditioning which occurs during exposure to microgravity. The NASA Human Research Program (HRP) within the Human Exploration and Operations Mission Directorate (HEOMD) is managing next generation Advanced Exercise Concepts (AEC) requirements development and candidate technology maturation to Technology Readiness Level (TRL) 7 (ground prototyping and flight demonstration) for all exploration mission profiles from Multi Purpose Crew Vehicle (MPCV) Exploration Missions (up to 21 day duration) to Mars Transit (up to 1000 day duration) missions. These validated and optimized exercise countermeasures systems will be provided to the ISS Program and MPCV Program for subsequent flight development and operations. The International Space Station (ISS) currently has three major pieces of operational exercise countermeasures hardware: the Advanced Resistive Exercise Device (ARED), the second-generation (T2) treadmill, and the cycle ergometer with vibration isolation system (CEVIS). This suite of exercise countermeasures hardware serves as a benchmark and is a vast improvement over previous generations of countermeasures hardware, providing both aerobic and resistive exercise for the crew. However, vehicle and resource constraints for future exploration missions beyond low Earth orbit will require that the exercise countermeasures hardware mass, volume, and power be minimized, while preserving the current ISS capabilities or even enhancing these exercise capabilities directed at mission specific physiological functional performance and medical standards requirements. Further, mission-specific considerations such as preservation of sensorimotor function, autonomous and adaptable operation, integration with medical data systems, rehabilitation, and in-flight monitoring and feedback are being developed for integration with the exercise

  10. Overview of the MFTF electrical systems

    International Nuclear Information System (INIS)

    Lindquist, W.B.; Eckard, R.D.; Holdsworth, T.; Mooney, L.J.; Moyer, D.R.; Peterson, R.L.; Shimer, D.W.; Wyman, R.H.; VanNess, H.W.

    1979-01-01

    The Mirror Fusion Test Facility, scheduled for completion in October 1981, will contain a complex, state-of-the-art array of electrical and electronics equipment valued at over 60 M$. Three injector systems will be employed to initiate and sustain the MFTF deuterium plasma. A plasma streaming system and a startup neutron beam system will be used to establish a target plasma. A sustaining neutral beam system will be used to fuel and sustain the MFTF plasma for 0.5 s. Additional power supply systems required on MFTF include two magnet power supplies with quench protection circuitry for powering the superconducting YIN/YANG magnet pair and eight 10 KHz power supplies for powering the Ti gettering system. Due to the complexity, physical size, and multiple systems of MFTF, a distributed, hierarchial, computer control and instrumentation system will be used. Color graphic, touch-panel, control consoles will provide the man-machine interface. The MFTF will have the capability of conducting an experiment every five minutes

  11. Editorial overview : Systems biology for biotechnology

    NARCIS (Netherlands)

    Heinemann, Matthias; Pilpel, Yitzhak

    About 15 years ago, systems biology was introduced as a novel approach to biological research. On the one side, its introduction was a result of the recognition that through solely the reductionist approach, we would ulti- mately not be able to understand how biological systems function as a whole.

  12. Nye County, Nevada 1992 nuclear waste repository program: Program overview. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    The purpose of this document is to provide an overview of the Nye County FY92 Nuclear Waste Repository Program (Program). Funds to pay for Program costs will come from the Federal Nuclear Waste Fund, which was established under the Nuclear Waste Policy Act of 1982 (NWPA). In early 1983, the Yucca Mountain was identified as a potentially suitable site for the nation`s first geologic repository for spent reactor fuel and high-level radioactive waste. Later that year, the Nye County Board of County Commissioners (Board) established the capability to monitor the Federal effort to implement the NWPA and evaluate the potential impacts of repository-related activities on Nye County. Over the last eight years, the County`s program has grown in complexity and cost in order to address DOE`s evolving site characterization studies, and prepare for the potential for facility construction and operation. Changes were necessary as well, in response to Congress`s redirection of the repository program specified in the amendments, to the NWPA approved in 1987. In early FY 1991, the County formally established a project office to plan and implement its program of work. The Repository Project Office`s (RPO) mission and functions are provided in Section 2.0. The RPO organization structure is described in Section 3.0.

  13. Nye County, Nevada 1992 nuclear waste repository program: Program overview. Final report

    International Nuclear Information System (INIS)

    1998-01-01

    The purpose of this document is to provide an overview of the Nye County FY92 Nuclear Waste Repository Program (Program). Funds to pay for Program costs will come from the Federal Nuclear Waste Fund, which was established under the Nuclear Waste Policy Act of 1982 (NWPA). In early 1983, the Yucca Mountain was identified as a potentially suitable site for the nation's first geologic repository for spent reactor fuel and high-level radioactive waste. Later that year, the Nye County Board of County Commissioners (Board) established the capability to monitor the Federal effort to implement the NWPA and evaluate the potential impacts of repository-related activities on Nye County. Over the last eight years, the County's program has grown in complexity and cost in order to address DOE's evolving site characterization studies, and prepare for the potential for facility construction and operation. Changes were necessary as well, in response to Congress's redirection of the repository program specified in the amendments, to the NWPA approved in 1987. In early FY 1991, the County formally established a project office to plan and implement its program of work. The Repository Project Office's (RPO) mission and functions are provided in Section 2.0. The RPO organization structure is described in Section 3.0

  14. Renewable Energy Systems: Technology Overview and Perspectives

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Ionel, Dan M.; Yang, Yongheng

    2017-01-01

    topologies are included. Also, the increasing role of power electronics is explained as an enabler for renewable energy integration and for future power systems and smart grids. Recent examples of research and development, including new devices and system installations for utility power plants......In this chapter, essential statistics demonstrating the increasing role of renewable energy generation are first discussed. A state-of-the-art review section covers the fundamentals of wind turbine and photovoltaic (PV) systems. Schematic diagrams illustrating the main components and system...... and for residential and commercial applications, are provided. Fuel cells, solar thermal, wave generators, and energy storage systems are also briefly presented and illustrated. Challenges and future trends for the technologies in 2025 are summarized in a table for onshore and offshore wind energy; solar power...

  15. Process Control System Cyber Security Standards - An Overview

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Evans

    2006-05-01

    The use of cyber security standards can greatly assist in the protection of process control systems by providing guidelines and requirements for the implementation of computer-controlled systems. These standards are most effective when the engineers and operators, using the standards, understand what each standard addresses. This paper provides an overview of several standards that deal with the cyber security of process measurements and control systems.

  16. Rover nuclear rocket engine program: Overview of rover engine tests

    Science.gov (United States)

    Finseth, J. L.

    1991-01-01

    The results of nuclear rocket development activities from the inception of the ROVER program in 1955 through the termination of activities on January 5, 1973 are summarized. This report discusses the nuclear reactor test configurations (non cold flow) along with the nuclear furnace demonstrated during this time frame. Included in the report are brief descriptions of the propulsion systems, test objectives, accomplishments, technical issues, and relevant test results for the various reactor tests. Additionally, this document is specifically aimed at reporting performance data and their relationship to fuel element development with little or no emphasis on other (important) items.

  17. Integrity Control in Relational Database Systems - An Overview

    NARCIS (Netherlands)

    Grefen, P.W.P.J.; Apers, Peter M.G.

    This paper gives an overview of research regarding integrity control or integrity constraint handling in relational database management systems. The topic of constraint handling is discussed from two points of view. First, constraint handling is discussed by identifying a number of important

  18. Overview of the Autonomic Nervous System

    Science.gov (United States)

    ... process. Autonomic disorders may be reversible or progressive. Anatomy of the autonomic nervous system The autonomic nervous ... with acetylcholine and placed on the legs and forearm. Then, the volume of sweat is measured to ...

  19. Renewable Energy Systems: Technology Overview and Perspectives

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Ionel, Dan M.; Yang, Yongheng

    2017-01-01

    In this chapter, essential statistics demonstrating the increasing role of renewable energy generation are first discussed. A state-of-the-art review section covers the fundamentals of wind turbine and photovoltaic (PV) systems. Schematic diagrams illustrating the main components and system...... topologies are included. Also, the increasing role of power electronics is explained as an enabler for renewable energy integration and for future power systems and smart grids. Recent examples of research and development, including new devices and system installations for utility power plants......, including PV and concentrating solar power; wave energy; fuel cells; and storage with batteries and hydrogen, respectively. Recommended further readings on topics of electric power engineering for renewable energy are included in the final section....

  20. Overview of the NSTX Control System

    International Nuclear Information System (INIS)

    Sichta, P.; Dong, J.; Oliaro, G.; Roney, P.

    2001-01-01

    The National Spherical Torus Experiment (NSTX) is an innovative magnetic fusion device that was constructed by the Princeton Plasma Physics Laboratory (PPPL) in collaboration with the Oak Ridge National Laboratory, Columbia University, and the University of Washington at Seattle. Since achieving first plasma in 1999, the device has been used for fusion research through an international collaboration of more than twenty institutions. The NSTX is operated through a collection of control systems that encompass a wide range of technology, from hardwired relay controls to real-time control systems with giga-FLOPS of capability. This paper presents a broad introduction to the control systems used on NSTX, with an emphasis on the computing controls, data acquisition, and synchronization systems

  1. Program Management System manual

    International Nuclear Information System (INIS)

    1986-01-01

    The Program Management System (PMS), as detailed in this manual, consists of all the plans, policies, procedure, systems, and processes that, taken together, serve as a mechanism for managing the various subprograms and program elements in a cohesive, cost-effective manner. The PMS is consistent with the requirements of the Nuclear Waste Policy Act of 1982 and the ''Mission Plan for the Civilian Radioactive Waste Management Program'' (DOE/RW-0005). It is based on, but goes beyond, the Department of Energy (DOE) management policies and procedures applicable to all DOE programs by adapting these directives to the specific needs of the Civilian Radioactive Waste Management program. This PMS Manual describes the hierarchy of plans required to develop and maintain the cost, schedule, and technical baselines at the various organizational levels of the Civilian Radioactive Waste Management Program. It also establishes the management policies and procedures used in the implementation of the Program. These include requirements for internal reports, data, and other information; systems engineering management; regulatory compliance; safety; quality assurance; and institutional affairs. Although expanded versions of many of these plans, policies, and procedures are found in separate documents, they are an integral part of this manual. The PMS provides the basis for the effective management that is needed to ensure that the Civilian Radioactive Waste Management Program fulfills the mandate of the Nuclear Waste Policy Act of 1982. 5 figs., 2 tabs

  2. On-Orbit Propulsion System Project Overview

    Science.gov (United States)

    Champion, Robert H.; Lyles, Garry M. (Technical Monitor)

    2002-01-01

    This conference presentation reports on the progress on NASA's On-Orbit Propulsion System Project which aims to support the development of second generation reusable launch vehicles (RLV) through advanced research and development and risk reduction activities. Topics covered include: project goals, project accomplishments, risk reduction activities, thruster design and development initiatives, and Aerojet LOX/Ethanol engine development and testing.

  3. NCIS - a Nuclear Criticality Information System (overview)

    International Nuclear Information System (INIS)

    Koponen, B.L.; Hampel, V.E.

    1983-07-01

    A Nuclear Criticality Information System (NCIS) is being established at the Lawrence Livermore National Laboratory (LLNL) in order to serve personnel responsible for safe storage, transport, and handling of fissile materials and those concerned with the evaluation and analysis of nuclear, critical experiments. Public concern for nuclear safety provides the incentive for improved access to nuclear safety information

  4. Operating system verification—An overview

    Indian Academy of Sciences (India)

    Abstract. This paper gives a high-level introduction to the topic of formal, interactive, machine-checked software verification in general, and the verification of operating systems code in particular. We survey the state of the art, the advantages and limitations of machine-checked code proofs, and describe two specific ongoing ...

  5. Operating system verification—An overview

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... This paper gives a high-level introduction to the topic of formal, interactive, machine-checked software verification in general, and the verification of operating systems code in particular. We survey the state of the art, the advantages and limitations of machine-checked code proofs, and describe two specific ...

  6. Space nuclear power studies in France - overview of the Erato program

    International Nuclear Information System (INIS)

    Proust, E.; Carre, F.; Chaudourne, S.; Gervaise, F.; Keirle, P.; Tilliette, Z.; Trouve, J.; Vrillon, B.

    1988-01-01

    A cooperative program about nuclear space power systems has been initiated in 1982 by both CNES (Centre National d'Etudes Spatiales) and CEA (Commissariat a l'Energie Atomique) with a view to assessing the feasibility, the lead time, and the cost of nuclear space power systems of the 20 to 400 kWe class. A first study phase, completed in mid 1986, has been devoted to preliminary feasibility and cost studies of a reference 200 kWe turboelectric power system ERATO compatible with the ARIANE V launcher. The present three-year study phase is mainly oriented toward the assessment of the potential advantages of nuclear power systems over solar dynamic and photovoltaic systems, within the 20 kWe power range, which corresponds to the expected power needs of the first european space missions. This paper is intended to give an overview of the present program phase, with emphasis on the design studies dedicated to three concepts of 20 kWe nuclear turboelectric power systems selected for comparison against non nuclear power systems

  7. An overview of the Nuclear Electric Propulsion Space Test Program (NEPSTP) satellite

    International Nuclear Information System (INIS)

    Voss, S.S.; Reynolds, E.L.

    1994-01-01

    Early in 1992 the idea of purchasing a Russian designed and fabricated space reactor power system and integrating it with a US designed satellite went from fiction to reality with the purchase of the first two Topaz II reactors by the Strategic Defense Initiative Organization (now the Ballistic Missile Defense Organization (BMDO)). The New Mexico Alliance was formed to establish a ground test facility in which to perform nonnuclear systems testing of the Topaz II, and to evaluate the Topaz II system for flight testing with respect to safety, performance, and operability. In conjunction, SDIO requested that the Applied Physics Laboratory in Laurel, MD propose a mission and design a satellite in which the Topaz II could be used as the power source. The outcome of these two activities was the design of the Nuclear Electric Propulsion Space Test Program (NEPSTP) satellite which combines a modified Russian Topaz II power system with a US designed satellite to achieve a specified mission. Due to funding reduction within the SDIO, the Topaz II flight program was postponed indefinitely at the end of Fiscal year 1993. The purpose of this paper is to present an overview of the NEPSTP mission and the satellite design at the time the flight program ended

  8. An Overview of Quality Programs that Support Transition-Aged Youth

    Directory of Open Access Journals (Sweden)

    Christopher M. Kalinyak

    2016-12-01

    Full Text Available This article provides a concise overview of several programs that deliver services to transition-aged youth, ages 14–29. Included are family support, the Assisting Unaccompanied Children and Youth program, the Substance Abuse and Mental Health Services Administration services, the wraparound approach, intensive home-based treatment, multisystemic therapy, foster care, independent living, mentoring, the Steps to Success program, the Jump on Board for Success program, the Options program, the Positive Action program, the Transition to Success model, and the Transition to Independence Program. Primary focus is placed upon the usefulness of each of the programs in facilitating successful outcomes for transition-aged youth.

  9. Control of distributed systems : tutorial and overview

    Czech Academy of Sciences Publication Activity Database

    van Schuppen, J. H.; Boutin, O.; Kempker, P.L.; Komenda, Jan; Masopust, Tomáš; Pambakian, N.; Ran, A.C.M.

    2011-01-01

    Roč. 17, 5-6 (2011), s. 579-602 ISSN 0947-3580 R&D Projects: GA ČR(CZ) GAP103/11/0517; GA ČR(CZ) GPP202/11/P028 Institutional research plan: CEZ:AV0Z10190503 Keywords : distributed system * coordination control * hierarchical control * distributed control * distributed control with communication Subject RIV: BA - General Mathematics Impact factor: 0.817, year: 2011 http://ejc.revuesonline.com/article.jsp?articleId=16873

  10. An Overview of Islanding Detection Methods in Photovoltaic Systems

    OpenAIRE

    Wei Yee Teoh; Chee Wei Tan

    2011-01-01

    The issue of unintentional islanding in PV grid interconnection still remains as a challenge in grid-connected photovoltaic (PV) systems. This paper discusses the overview of popularly used anti-islanding detection methods, practically applied in PV grid-connected systems. Anti-islanding methods generally can be classified into four major groups, which include passive methods, active methods, hybrid methods and communication base methods. Active methods have been the pref...

  11. COMPUTER-BASED REASONING SYSTEMS: AN OVERVIEW

    Directory of Open Access Journals (Sweden)

    CIPRIAN CUCU

    2012-12-01

    Full Text Available Argumentation is nowadays seen both as skill that people use in various aspects of their lives, as well as an educational technique that can support the transfer or creation of knowledge thus aiding in the development of other skills (e.g. Communication, critical thinking or attitudes. However, teaching argumentation and teaching with argumentation is still a rare practice, mostly due to the lack of available resources such as time or expert human tutors that are specialized in argumentation. Intelligent Computer Systems (i.e. Systems that implement an inner representation of particular knowledge and try to emulate the behavior of humans could allow more people to understand the purpose, techniques and benefits of argumentation. The proposed paper investigates the state of the art concepts of computer-based argumentation used in education and tries to develop a conceptual map, showing benefits, limitation and relations between various concepts focusing on the duality “learning to argue – arguing to learn”.

  12. Adaptation in the auditory system: an overview

    Directory of Open Access Journals (Sweden)

    David ePérez-González

    2014-02-01

    Full Text Available The early stages of the auditory system need to preserve the timing information of sounds in order to extract the basic features of acoustic stimuli. At the same time, different processes of neuronal adaptation occur at several levels to further process the auditory information. For instance, auditory nerve fiber responses already experience adaptation of their firing rates, a type of response that can be found in many other auditory nuclei and may be useful for emphasizing the onset of the stimuli. However, it is at higher levels in the auditory hierarchy where more sophisticated types of neuronal processing take place. For example, stimulus-specific adaptation, where neurons show adaptation to frequent, repetitive stimuli, but maintain their responsiveness to stimuli with different physical characteristics, thus representing a distinct kind of processing that may play a role in change and deviance detection. In the auditory cortex, adaptation takes more elaborate forms, and contributes to the processing of complex sequences, auditory scene analysis and attention. Here we review the multiple types of adaptation that occur in the auditory system, which are part of the pool of resources that the neurons employ to process the auditory scene, and are critical to a proper understanding of the neuronal mechanisms that govern auditory perception.

  13. Overview of the US Department of Energy Light Water Reactor Sustainability Program

    International Nuclear Information System (INIS)

    McCarthy, K.A.; Williams, D.L.; Reister, R.

    2012-01-01

    The US Department of Energy Light Water Reactor Sustainability (LWRS) Program is focused on enabling the long-term operation of US commercial power plants. Decisions on life extension will be made by commercial power plant owners - the information provided by the research and development activities in the LWRS Program will reduce the uncertainty (and therefore the risk) associated with making those decisions. The LWRS Program encompasses two facets of long-term operation: (1) manage the aging of plant systems, structures, and components so that nuclear power plant lifetimes can be extended and the plants can continue to operate safely, efficiently, and economically; and (2) provide science-based solutions to the nuclear industry that support implementation of performance improvement technologies. An important aspect of the Light Water Reactor Sustainability Program is partnering with industry and the Nuclear Regulatory Commission to support and conduct the long-term research needed to inform major component refurbishment and replacement strategies, performance enhancements, plant license extensions, and age-related regulatory oversight decisions. The Department of Energy research, development, and demonstration role focuses on aging phenomena and issues that require long-term research and/or unique Department of Energy laboratory expertise and facilities and are applicable to all operating reactors. This paper provides an overview of the Department of Energy Light Water Reactor Sustainability Program, including vision, goals, and major deliverables. (author)

  14. Biogeochemistry of uranium mill wastes program overview and conclusions

    International Nuclear Information System (INIS)

    Dreesen, D.R.

    1981-05-01

    The major findings and conclusions are summarized for research on uranium mill tailings for the US Department of Energy and the US Nuclear Regulatory Commission. An overview of results and interpretations is presented for investigations of 222 Rn emissions, revegetation of tailings and mine spoils, and trace element enrichment, mobility, and bioavailability. A brief discussion addresses the implications of these findings in relation to tailings disposal technology and proposed uranium recovery processes

  15. Ship information system: overview and research trends

    Directory of Open Access Journals (Sweden)

    Sheng Liu

    2014-09-01

    Full Text Available Ship Information Systems (SISs have been one of the main research focuses in ship design and become a multidisciplinary area. With these growing research trends, it is important to consolidate the latest knowledge and information to keep up with the research needs. In this paper, the SIS and its different forms are introduced and discussed. The beginning of this paper discusses the history and evolution of SIS. The next part of this paper focuses on different fields and research areas such as networking technology, information fusion, information decision, message display, ship control in real-time SISs. A Semi-Physical Simulation Platform (SPSIM designed for SIS research and its running effect through a new Fuzzy-PID fusion algorithm are introduced in this paper then. A brief literature survey and possible future direction concerning each topic is included.

  16. Multimedia systems overview: the big picture

    Science.gov (United States)

    Riccomi, Alfred

    1993-01-01

    The golden opportunities represented by multimedia systems have been recognized by many. The risk and cost involved in developing the products and the markets has led to a bonanza of unlikely consortia of strange bedfellows. The premier promoter of personal computing systems, Apple Computer, has joined forces with the dominant supplier of corporate computing, IBM, to form a multimedia technology joint venture called Kaleida. The consumer electronics world's leading promoter of free trade, Sony, has joined forces with the leader of Europe's protectionist companies, Philips, to create a consumer multimedia standard called CD-I. While still paying lip service to CD-I, Sony and Philips now appear to be going their separate ways. The software world's most profitable/fastest growing firm, Microsoft, has entered into alliances with each and every multimedia competitor to create a mish mash of product classes and defacto standards. The battle for Multimedia Standards is being fought on all fronts: on standards committees, in corporate strategic marketing meetings, within industry associations, in computer retail stores, and on the streets. Early attempts to set proprietary defacto standards were fought back, but the proprietary efforts continue with renewed vigor. Standards committees were, as always, slow to define specifications, but the official standards are now known nd being implemented; ... but the proprietary efforts continue with renewed vigor. Ultimately, the buyers will decide -- like it or not. Success by the efforts to establish proprietary defacto standards could prove to be a boon to the highly creative and inventive U.S. firms, but at the cost of higher prices for consumers and slower market growth. Success by the official standards could bring lower prices for consumers and fast market growth, but force the higher-wage/higher-overhead U.S. firms to compete on a level playing field. As is always the case, you can't have your cake and eat it too.

  17. National Waste Terminal Storage Program, planning and control system manual

    International Nuclear Information System (INIS)

    1976-09-01

    This manual contains a brief description of the NWTS program in order to define the environment within which the system must function; an overview of the system, and the concepts and techniques that were utilized in its development; and OWI implementation on the NWTS Program

  18. Overview of systemic and localized amyloidosis

    Directory of Open Access Journals (Sweden)

    Saulius Girnius

    2013-10-01

    Full Text Available Amyloidosis is a family of protein misfolding disorders, in which insoluble fibrillar proteins deposit extracellularly and cause end organ damage. Depending on the precursor protein, clinical manifestations in amyloidosis vary significantly. In systemic amyloidosis, the heart, kidneys, and nerves are most commonly affected, resulting in congestive heart failure, arrhythmia, nephrotic syndrome, renal failure, and peripheral and autonomic neuropathies. In localized amyloidosis, amyloid deposits at the site of production, so only one organ is disrupted. Once amyloidosis is confirmed histologically, the precursor subtype must be identified using immunohistochemistry, immunofixation, electron microscopy, or laser microdissection and mass spectrometry. Treatment should not be initiated prior to the identification of the type of amyloidosis. Currently, treatment focuses on the suppression of the precursor protein: in AL amyloidosis, chemotherapy or autologous stem cell transplants suppress production of immunoglobulin light chains; in AA amyloidosis, anti-microbial and anti-inflammatory agents suppress amyloid A production; and in AF amyloidosis, a liver transplantation removes the source of mutant transthyretin protein production. Newer drugs are being developed to target amyloidosis at an epigenetic level or stabilize folding intermediates, but there are currently in development.http://dx.doi.org/10.7175/rhc.v4i4.662

  19. An overview of flywheel energy systems.

    Energy Technology Data Exchange (ETDEWEB)

    Wolsky, A. M.; Energy Systems

    2002-05-01

    Passive magnetic bearings incorporating permanent magnets and ReBaCuO, together with carbon fibre, offer the possibility of increasing the stored, volumetric energy density of FES and unprecedentedly low idling loss of FES. Its stored energy need only satisfy customers needs for the time it takes to bring on conventional 'back-up'. The FES itself must come up to power quickly enough to avoid any disruption in the customer's operation (e.g., continuous industrial processes involving fragile materials, for example paper forming). Such customers do not care about the price of electricity nearly as much as they care about not ruining their product, damaging their machines or having 'clean ups' that stop or slow output. Firms that engage in electronic commerce and/or telecommunications also value uninterruptible power. Another set of potential customers (construction, electric railroads) may wish to avoid fluctuations in their electrical supply or they may wish to avoid causing harm to others who may hold them liable for poor power quality. Finally, real time prices (e.g., every 15 s) and real time commands, disseminated via internet, and distributed storage might enable reduced system generation costs. Generators and FES makers would have to cooperate to make this feasible. Now, the central techno-economic challenge is to build a high-power, low-loss motor generator that reaches full power in a very short time.

  20. NASIS data base management system - IBM 360/370 OS MVT implementation. 2: Overviews

    Science.gov (United States)

    1973-01-01

    The systems overviews of the NASA Aerospace Safety Information System (NASIS) are presented. The overviews are directed toward informing management of a system's capabilities and requirements. The intent of the overviews is to introduce the system features to interested individuals. Each overview contains a description of the component's activities and roles in the overall system. The description includes charts and diagrams and a discussion of the performance requirements and growth potential of the module.

  1. Overview of interstate hydrogen pipeline systems.

    Energy Technology Data Exchange (ETDEWEB)

    Gillette, J .L.; Kolpa, R. L

    2008-02-01

    . The following discussion will focus on the similarities and differences between the two pipeline networks. Hydrogen production is currently concentrated in refining centers along the Gulf Coast and in the Farm Belt. These locations have ready access to natural gas, which is used in the steam methane reduction process to make bulk hydrogen in this country. Production centers could possibly change to lie along coastlines, rivers, lakes, or rail lines, should nuclear power or coal become a significant energy source for hydrogen production processes. Should electrolysis become a dominant process for hydrogen production, water availability would be an additional factor in the location of production facilities. Once produced, hydrogen must be transported to markets. A key obstacle to making hydrogen fuel widely available is the scale of expansion needed to serve additional markets. Developing a hydrogen transmission and distribution infrastructure would be one of the challenges to be faced if the United States is to move toward a hydrogen economy. Initial uses of hydrogen are likely to involve a variety of transmission and distribution methods. Smaller users would probably use truck transport, with the hydrogen being in either the liquid or gaseous form. Larger users, however, would likely consider using pipelines. This option would require specially constructed pipelines and the associated infrastructure. Pipeline transmission of hydrogen dates back to late 1930s. These pipelines have generally operated at less than 1,000 pounds per square inch (psi), with a good safety record. Estimates of the existing hydrogen transmission system in the United States range from about 450 to 800 miles. Estimates for Europe range from about 700 to 1,100 miles (Mohipour et al. 2004; Amos 1998). These seemingly large ranges result from using differing criteria in determining pipeline distances. For example, some analysts consider only pipelines above a certain diameter as transmission lines

  2. Overview of interstate hydrogen pipeline systems

    International Nuclear Information System (INIS)

    Gillette, J.L.; Kolpa, R.L.

    2008-01-01

    . The following discussion will focus on the similarities and differences between the two pipeline networks. Hydrogen production is currently concentrated in refining centers along the Gulf Coast and in the Farm Belt. These locations have ready access to natural gas, which is used in the steam methane reduction process to make bulk hydrogen in this country. Production centers could possibly change to lie along coastlines, rivers, lakes, or rail lines, should nuclear power or coal become a significant energy source for hydrogen production processes. Should electrolysis become a dominant process for hydrogen production, water availability would be an additional factor in the location of production facilities. Once produced, hydrogen must be transported to markets. A key obstacle to making hydrogen fuel widely available is the scale of expansion needed to serve additional markets. Developing a hydrogen transmission and distribution infrastructure would be one of the challenges to be faced if the United States is to move toward a hydrogen economy. Initial uses of hydrogen are likely to involve a variety of transmission and distribution methods. Smaller users would probably use truck transport, with the hydrogen being in either the liquid or gaseous form. Larger users, however, would likely consider using pipelines. This option would require specially constructed pipelines and the associated infrastructure. Pipeline transmission of hydrogen dates back to late 1930s. These pipelines have generally operated at less than 1,000 pounds per square inch (psi), with a good safety record. Estimates of the existing hydrogen transmission system in the United States range from about 450 to 800 miles. Estimates for Europe range from about 700 to 1,100 miles (Mohipour et al. 2004; Amos 1998). These seemingly large ranges result from using differing criteria in determining pipeline distances. For example, some analysts consider only pipelines above a certain diameter as transmission lines

  3. An Overview of Recent PISCES Program PMI Results

    Science.gov (United States)

    Tynan, George; Doerner, Russell; Abe, Shota; Baldwin, Matthew; Barton, Joseph; Chen, Renkun; Gosselin, Jordan; Hollmann, Eric; Nishijima, Daisuke; Simmonds, Michael; Wang, Yong; Yu, Jonathan

    2015-11-01

    The PISCES Program is focused on fundamental PMI studies of Be and W-based solid plasma facing components under steady-state and transient conditions. We will show results from studies in W, Be and mixed W-Be material systems. Topics of investigation include formation of near-surface nanobubbles from He plasma ion implantation, growth of W-fuzz from these bubbles in steady-state and transient conditions, D retention in Be and W and development of a D-retention model for both H/D isotope exchange and displacement damage experiments. Initial studies of PMI in displacement damaged W are also presented, showing the effect of damage and exposure temperature on D retention, D diffusion, W thermal conductivity. Be-based results include morphology evolution under high plasma flux exposure, Be erosion mechanisms, and retention in Be-based materials. Future plans and connections to fusion energy system requirements will be discussed. This work supported by grant DE-FG02-07ER54912.

  4. Communication Skills for Career Success: A Programmed Textbook. Book I: Overview and Active Listening.

    Science.gov (United States)

    Lombana, Judy H.; Pratt, Phillip A.

    As the first volume in a set of programmed instructional materials to help college students improve their communication skills in preparation for the job market, this booklet presents an overview of communication skills and a section on active listening. Designed for students to use on their own, the format of the program is to present a situation…

  5. Reducing the Risk: Unemployed Migrant Youth and Labour Market Programs. Overview.

    Science.gov (United States)

    Australian Inst. of Multicultural Affairs, Melbourne (Australia).

    This booklet is an overview and summary of the publication "Reducing the Risk: Unemployed Migrant Youth and Labour Market Programs" which reviews programs and services for migrant and refugee youth in Australia. The unemployment rate for this group is higher than for their Australian-born peers, and their participation in governmental…

  6. Human Research Program Science Management: Overview of Research and Development Activities

    Science.gov (United States)

    Charles, John B.

    2007-01-01

    An overview of research and development activities of NASA's Human Research Science Management Program is presented. The topics include: 1) Human Research Program Goals; 2) Elements and Projects within HRP; 3) Development and Maintenance of Priorities; 4) Acquisition and Evaluation of Research and Technology Proposals; and 5) Annual Reviews

  7. Overview of the U.S. Department of Energy's Isotope Programs

    Energy Technology Data Exchange (ETDEWEB)

    Carty, J.

    2004-10-05

    This presentation provides an overview of the U.S. Department of Energy's Isotopes Program. The charter of the Isotope Programs covers the production and sale of radioactive and stable isotopes, associated byproducts, surplus materials, and related isotope services.

  8. The NASA Electronic Parts and Packaging (NEPP) Program: Overview and Update FY15 and Beyond

    Science.gov (United States)

    LaBel, Kenneth A.; Sampson, Michael J.

    2016-01-01

    The NASA Electronic Parts and Packaging (NEPP) program, and its subset the NASA Electronic Parts Assurance Group (NEPAG), are NASA's point-of-contacts for reliability and radiation tolerance of electrical, electronic, and electromechanical (EEE) parts and their packages. This presentation includes a Fiscal Year 2015 program overview.

  9. 75 FR 9879 - Office of Innovation and Improvement; Overview Information Magnet Schools Assistance Program...

    Science.gov (United States)

    2010-03-04

    ... DEPARTMENT OF EDUCATION Office of Innovation and Improvement; Overview Information Magnet Schools... Announcement I. Funding Opportunity Description Purpose of Program: The Magnet Schools Assistance Program (MSAP) provides grants to eligible local educational agencies (LEAs) and consortia of LEAs to support magnet...

  10. Greenhouse Gas Emissions From Energy Systems: Comparison And Overview

    International Nuclear Information System (INIS)

    Dones, R.; Heck, T.; Hirschberg, S.

    2004-01-01

    The paper provides an overview and comparison of Greenhouse Gas Emissions associated with fossil, nuclear and renewable energy systems. In this context both the direct technology-specific emissions and the contributions from full energy chains within the Life Cycle Assessment framework are considered. Examples illustrating the differences between countries and regional electricity mixes are also provided. Core results presented here are based on the work performed at PSI, and by partners within the Swiss Centre for Life-Cycle Inventories. (author)

  11. ADVANCED TURBINE SYSTEMS PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Gregory Gaul

    2004-04-21

    Natural gas combustion turbines are rapidly becoming the primary technology of choice for generating electricity. At least half of the new generating capacity added in the US over the next twenty years will be combustion turbine systems. The Department of Energy has cosponsored with Siemens Westinghouse, a program to maintain the technology lead in gas turbine systems. The very ambitious eight year program was designed to demonstrate a highly efficient and commercially acceptable power plant, with the ability to fire a wide range of fuels. The main goal of the Advanced Turbine Systems (ATS) Program was to develop ultra-high efficiency, environmentally superior and cost effective competitive gas turbine systems for base load application in utility, independent power producer and industrial markets. Performance targets were focused on natural gas as a fuel and included: System efficiency that exceeds 60% (lower heating value basis); Less than 10 ppmv NO{sub x} emissions without the use of post combustion controls; Busbar electricity that are less than 10% of state of the art systems; Reliability-Availability-Maintainability (RAM) equivalent to current systems; Water consumption minimized to levels consistent with cost and efficiency goals; and Commercial systems by the year 2000. In a parallel effort, the program was to focus on adapting the ATS engine to coal-derived or biomass fuels. In Phase 1 of the ATS Program, preliminary investigators on different gas turbine cycles demonstrated that net plant LHV based efficiency greater than 60% was achievable. In Phase 2 the more promising cycles were evaluated in greater detail and the closed-loop steam-cooled combined cycle was selected for development because it offered the best solution with least risk for achieving the ATS Program goals for plant efficiency, emissions, cost of electricity and RAM. Phase 2 also involved conceptual ATS engine and plant design and technology developments in aerodynamics, sealing

  12. Overview of Single-Phase Grid-Connected Photovoltaic Systems

    DEFF Research Database (Denmark)

    Yang, Yongheng; Blaabjerg, Frede

    2017-01-01

    A continuous booming installation of solar photovoltaic (PV) systems has been witnessed worldwide. It is mainly driven by the imperative demand of “clean” power generation from renewables. Grid-connected PV systems will thus become an even more active player in the future mixed power systems, which...... systems. This chapter thus gives an overview of the advancement of power electronics converters in single-phase grid-connected PV systems, being commonly used in residential applications. Demands to single-phase grid-connected PV systems and the general control strategies are also addressed...... are linked together by a vast of power electronics converters and the power grid. In order to achieve a reliable and efficient power generation from PV systems, more stringent demands have been imposed on the entire PV system. It, in return, advances the development of the power converter technology in PV...

  13. Overview of the joint US/Russia surety program in the Sandia National Laboratories Cooperative Measures Program

    Energy Technology Data Exchange (ETDEWEB)

    Smith, R.E. [Sandia National Labs., Albuquerque, NM (United States); Vorontsova, O.S. [Russian Federal Nuclear Center Inst. of Experimental Physics, Sarov (Russian Federation); Blinov, I.M. [Russian Federal Nuclear Center Inst. of Technical Physics, Snezhinsk (Russian Federation)

    1998-02-01

    Sandia National Laboratories has initiated many joint research and development projects with the two premier Russian nuclear laboratories, VNIIEF and VNIITF, (historically known as Arzamas-16 and Chelyabinsk-70) in a wide spectrum of areas. One of the areas in which critical dialogue and technical exchange is continuing to take place is in the realm of system surety. Activities primarily include either safety or security methodology development, processes, accident environment analyses and testing, accident data-bases, assessments, and product design. Furthermore, a continuing dialog has been established between the organizations with regard to developing a better understanding of how risk is perceived and analyzed in Russia versus that in the US. The result of such efforts could reduce the risk of systems to incur accidents or incidents resulting in high consequences to the public. The purpose of this paper is to provide a current overview of the Sandia surety program and its various initiatives with the Russian institutes, with an emphasis on the program scope and rationale. The historical scope of projects will be indicated. A few specific projects will be discussed, along with results to date. The extension of the joint surety initiatives to other government and industry organizations will be described. This will include the current status of a joint Sandia/VNIIEF initiative to establish an International Surety Center for Energy Intensive and High Consequence Systems and Infrastructures.

  14. Overview of the joint US/Russia surety program in the Sandia National Laboratories Cooperative Measures Program

    International Nuclear Information System (INIS)

    Smith, R.E.; Vorontsova, O.S.; Blinov, I.M.

    1998-02-01

    Sandia National Laboratories has initiated many joint research and development projects with the two premier Russian nuclear laboratories, VNIIEF and VNIITF, (historically known as Arzamas-16 and Chelyabinsk-70) in a wide spectrum of areas. One of the areas in which critical dialogue and technical exchange is continuing to take place is in the realm of system surety. Activities primarily include either safety or security methodology development, processes, accident environment analyses and testing, accident data-bases, assessments, and product design. Furthermore, a continuing dialog has been established between the organizations with regard to developing a better understanding of how risk is perceived and analyzed in Russia versus that in the US. The result of such efforts could reduce the risk of systems to incur accidents or incidents resulting in high consequences to the public. The purpose of this paper is to provide a current overview of the Sandia surety program and its various initiatives with the Russian institutes, with an emphasis on the program scope and rationale. The historical scope of projects will be indicated. A few specific projects will be discussed, along with results to date. The extension of the joint surety initiatives to other government and industry organizations will be described. This will include the current status of a joint Sandia/VNIIEF initiative to establish an International Surety Center for Energy Intensive and High Consequence Systems and Infrastructures

  15. Overview of ASC Capability Computing System Governance Model

    Energy Technology Data Exchange (ETDEWEB)

    Doebling, Scott W. [Los Alamos National Laboratory

    2012-07-11

    This document contains a description of the Advanced Simulation and Computing Program's Capability Computing System Governance Model. Objectives of the Governance Model are to ensure that the capability system resources are allocated on a priority-driven basis according to the Program requirements; and to utilize ASC Capability Systems for the large capability jobs for which they were designed and procured.

  16. An Evaluative Overview of the Kendale Pilot Resource Program.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL. Office of Educational Accountability.

    This report presents evaluation data on a school-based resource program for gifted students in grades 1-6. The program was designed in part to reduce transportation-related problems of the special school approach. The approach differs from the learning center approach in several ways, including time factors and the extent of instruction in basic…

  17. Lawrence Berkeley Laboratory/University of California lighting program overview

    Energy Technology Data Exchange (ETDEWEB)

    Berman, S.

    1981-12-01

    The objective of the Lighting Program is to assist and work in concert with the lighting community (composed of manufacturers, designers, and users) to achieve a more efficient lighting economy. To implement its objectives, the Lighting Program has been divided into three major categories: technical engineering, buildings applications, and human impacts (impacts on health and vision). The technical program aims to undertake research and development projects that are both long-range and high-risk and which the lighting industry has little interest in pursuing on its own, but from which significant benefits could accrue to both the public and the industry. The building applications program studies the effects that introducing daylighting in commercial buildings has on lighting and cooling electrical energy requirements as well as on peak demand. This program also examines optimization strategies for integrating energy-efficient design, lighting hardware, daylighting, and overall building energy requirements. The impacts program examines relationships between the user and the physical lighting environment, in particular how new energy-efficient technologies relate to human productivity and health. These efforts are interdisciplinary, involving engineering, optometry, and medicine. The program facilities are described and the personnel in the program is identified.

  18. The Evaluation of the Resolving Conflict Creatively Program: an overview.

    Science.gov (United States)

    Aber, J L; Brown, J L; Chaudry, N; Jones, S M; Samples, F

    1996-01-01

    The Resolving Conflict Creatively Program (RCCP) is a comprehensive, school-based program in conflict resolution and intercultural understanding implemented in more than 110 New York City public schools. The National Center for Children in Poverty is currently conducting an evaluation of the program in grades 1-6, although the program itself is implemented in grades K-12. The following components are included: teacher training, classroom instruction and staff development, the program curriculum, administrators' training, peer mediation, parent training, and a targeted intervention for high-risk youth. The program evolved out of practice-based theory. Researchers and practitioners have collaborated on and designed an evaluation that illustrates how the practice-based theory is consistent with and can be put into operation using developmental and ecological theories of the etiology of violence-related behaviors in middle childhood. The target population for this study is approximately 9,600 children, 5-12 years of age, in 15 elementary schools in New York City. The evaluation is being conducted over two years with two data-collection points in each year. A cross-sequential design is being used to examine the short- and intermediate-term utility with children at different ages/developmental stages. The relative effect of the beginning program can be compared to more comprehensive models. A total of 8,233 students responded to the baseline survey. The study population is largely Hispanic (41%) and African American (37%). Preliminary analyses indicate that baseline means of such constructs as aggressive fantasies, hostile attributional biases, and conduct problems increase with grade level. Ten years of practice-based experience and one year of a two-year quantitative evaluation have taught several important lessons about school-based program implementation and the evaluation of such programs. The scope and longevity of the RCCP and the empirically rigorous evaluation

  19. The MSFC Systems Engineering Guide: An Overview and Plan

    Science.gov (United States)

    Shelby, Jerry; Thomas, L. Dale

    2007-01-01

    This paper describes the guiding vision, progress to date and the plan forward for development of the Marshall Space Flight Center (MSFC) Systems Engineering Guide (SEG), a virtual systems engineering handbook and archive that describes the system engineering processes used by MSFC in the development of ongoing complex space systems such as the Ares launch vehicle and forthcoming ones as well. It is the intent of this website to be a "One Stop Shop' for MSFC systems engineers that will provide tutorial information, an overview of processes and procedures and links to assist system engineering with guidance and references, and provide an archive of relevant systems engineering artifacts produced by the many NASA projects developed and managed by MSFC over the years.

  20. An Overview of State Policies Supporting Worksite Health Promotion Programs.

    Science.gov (United States)

    VanderVeur, Jennifer; Gilchrist, Siobhan; Matson-Koffman, Dyann

    2017-05-01

    Worksite health promotion (WHP) programs can reduce the occurrence of cardiovascular disease risk factors. State law can encourage employers and employer-provided insurance companies to offer comprehensive WHP programs. This research examines state law authorizing WHP programs. Quantitative content analysis. Worksites or workplaces. United States (and the District of Columbia). State law in effect in 2013 authorizing WHP programs. Frequency and distribution of states with WHP laws. To determine the content of the laws for analysis and coding, we identified 18 policy elements, 12 from the Centers for Disease Control and Prevention's Worksite Health ScoreCard (HSC) and 6 additional supportive WHP strategies. We used these strategies as key words to search for laws authorizing WHP programs or select WHP elements. We calculated the number and type of WHP elements for each state with WHP laws and selected two case examples from states with comprehensive WHP laws. Twenty-four states authorized onsite WHP programs, 29 authorized WHP through employer-provided insurance plans, and 18 authorized both. Seven states had a comprehensive WHP strategy, addressing 8 or more of 12 HSC elements. The most common HSC elements were weight management, tobacco cessation, and physical activity. Most states had laws encouraging the adoption of WHP programs. Massachusetts and Maine are implementing comprehensive WHP laws but studies evaluating their health impact are needed.

  1. TS Seminar: Overview of Fermilab’s Power Distribution System

    CERN Multimedia

    CERN. Geneva

    2006-01-01

    A 27.5 km2 (6800 acre) site is powered by two 345 kV, two 34.5 kV, one 12.4 kV and five 7.2 kV lines. The talk gives an overview of Fermilab’s power distribution system with emphasis on accelerator power. The accelerator power distribution system provides 13.8 kV power to all accelerators and conventional loads. Design criteria, design features and operational experience are given.Organiser(s): F. Rodriguez-Mateos & Emmanuel Tsesmelis

  2. Computer system validation: an overview of official requirements and standards.

    Science.gov (United States)

    Hoffmann, A; Kähny-Simonius, J; Plattner, M; Schmidli-Vckovski, V; Kronseder, C

    1998-02-01

    A brief overview of the relevant documents for companies in the pharmaceutical industry, which are to be taken into consideration to fulfil computer system validation requirements, is presented. We concentrate on official requirements and valid standards in the USA, European Community and Switzerland. There are basically three GMP-guidelines. their interpretations by the associations of interests like APV and PDA as well as the GAMP Suppliers Guide. However, the three GMP-guidelines imply the same philosophy about computer system validation. They describe more a what-to-do approach for validation, whereas the GAMP Suppliers Guide describes a how-to-do validation. Nevertheless, they do not contain major discrepancies.

  3. Vulnerability and Risk Analysis Program: Overview of Assessment Methodology

    National Research Council Canada - National Science Library

    2001-01-01

    .... Over the last three years, a team of national laboratory experts, working in partnership with the energy industry, has successfully applied the methodology as part of OCIP's Vulnerability and Risk Analysis Program (VRAP...

  4. Intelligent Systems for Active Program Diagnosis

    Directory of Open Access Journals (Sweden)

    Haider Ali Ramadhan

    2000-12-01

    Full Text Available Intelligent program diagnosis systems are computer programs capable of analyzing logical and design-level errors and misconceptions in programs. Upon discovering the errors, these systems provide intelligent feedback and thus guide the users in the problem-solving process. Intelligent program diagnosis systems are classified by their primary means of program analysis. The most distinct split is between those systems that are unable to analyze partial code segments as they are provided by the user and must wait until the entire solution code is completed before attempting any diagnosis, and those that are capable of analyzing partial solutions and providing proper guidance whenever an error or misconception is encountered. This paper gives an overview of the field and then critically compares work accomplished on several closely related active diagnosis systems, emphasizing such issues as the representation techniques used to capture the domain knowledge required for the diagnosis, ability to handle the diagnosis of partial code segments of the solutions, features of the user interfaces, and methodologies used in conducting the diagnosis process. Finally the paper presents a detailed discussion on issues related to active program diagnosis along with various design considerations to improve the engineering of this approach to intelligent diagnosis. The discussion presented in this paper tackles the issues referred above within the context of DISCOVER, an intelligent system for programming by discovery.

  5. An Overview of Reconfigurable Hardware in Embedded Systems

    Directory of Open Access Journals (Sweden)

    Garcia Philip

    2006-01-01

    Full Text Available Over the past few years, the realm of embedded systems has expanded to include a wide variety of products, ranging from digital cameras, to sensor networks, to medical imaging systems. Consequently, engineers strive to create ever smaller and faster products, many of which have stringent power requirements. Coupled with increasing pressure to decrease costs and time-to-market, the design constraints of embedded systems pose a serious challenge to embedded systems designers. Reconfigurable hardware can provide a flexible and efficient platform for satisfying the area, performance, cost, and power requirements of many embedded systems. This article presents an overview of reconfigurable computing in embedded systems, in terms of benefits it can provide, how it has already been used, design issues, and hurdles that have slowed its adoption.

  6. An overview of decision tree applied to power systems

    DEFF Research Database (Denmark)

    Liu, Leo; Rather, Zakir Hussain; Chen, Zhe

    2013-01-01

    The corrosive volume of available data in electric power systems motivate the adoption of data mining techniques in the emerging field of power system data analytics. The mainstream of data mining algorithm applied to power system, Decision Tree (DT), also named as Classification And Regression...... Tree (CART), has gained increasing interests because of its high performance in terms of computational efficiency, uncertainty manageability, and interpretability. This paper presents an overview of a variety of DT applications to power systems for better interfacing of power systems with data...... analytics. The fundamental knowledge of CART algorithm is also introduced which is then followed by examples of both classification tree and regression tree with the help of case study for security assessment of Danish power system....

  7. An Overview of Reconfigurable Hardware in Embedded Systems

    Directory of Open Access Journals (Sweden)

    Wenyin Fu

    2006-09-01

    Full Text Available Over the past few years, the realm of embedded systems has expanded to include a wide variety of products, ranging from digital cameras, to sensor networks, to medical imaging systems. Consequently, engineers strive to create ever smaller and faster products, many of which have stringent power requirements. Coupled with increasing pressure to decrease costs and time-to-market, the design constraints of embedded systems pose a serious challenge to embedded systems designers. Reconfigurable hardware can provide a flexible and efficient platform for satisfying the area, performance, cost, and power requirements of many embedded systems. This article presents an overview of reconfigurable computing in embedded systems, in terms of benefits it can provide, how it has already been used, design issues, and hurdles that have slowed its adoption.

  8. The Marshall Islands radioassay quality assurance program. An overview

    International Nuclear Information System (INIS)

    Hamilton, T.F.; Robison, W.L.; Kehl, S.; Stoker, A.C.; Conrado, C.L.

    2000-01-01

    An extensive quality assurance program to provide high quality data and assessments in support of the Marshall Islands Dose Assessment and Radioecology Program has been developed the Lawrence Livermore National Laboratory. Quality assurance objectives begin with the premise of providing integrated and cost-effective program support (to meet wide-ranging programmatic needs, scientific peer review, and build public confidence) and continue through from design and implementation of large-scale field programs, sampling and sample preparation, radiometric and chemical analyses, documentation of quality assurance/quality control practices, exposure assessments, and dose/risk assessments until publication. The basic structure of the radioassay quality assurance/quality control program can be divided into four essential elements: (1) sample and data integrity control, (2) instrument validation and calibration, (3) method performance testing, validation, development and documentation, and (4) periodic peer review and on-site assessments. While the quality assurance objectives are tailored towards a single research program and the evaluation of major exposure pathways/critical radionuclides pertinent to the Marshall Islands, quality assurance practices that are consistent with proposed criteria designed for laboratory accreditation were attempted to be developed. (author)

  9. TERRAPOWER, LLC TRAVELING WAVE REACTOR DEVELOPMENT PROGRAM OVERVIEW

    Directory of Open Access Journals (Sweden)

    PAVEL HEJZLAR

    2013-11-01

    burden. This paper describes the origins and current status of the TWR development program at TerraPower, LLC. Some of the areas covered include the key TWR design challenges and brief descriptions of TWR-Prototype (TWR-P reactor. Selected information on the TWR-P core designs are also provided in the areas of neutronic, thermal hydraulic and fuel performance. The TWR-P plant design is also described in such areas as; system design descriptions, mechanical design, and safety performance.

  10. An Overview of the NASA Aeronautics Test Program Strategic Plan

    Science.gov (United States)

    Marshall, Timothy J.

    2010-01-01

    U.S. leadership in aeronautics depends on ready access to technologically advanced, efficient, and affordable aeronautics test capabilities. These systems include major wind tunnels and propulsion test facilities and flight test capabilities. The federal government owns the majority of the major aeronautics test capabilities in the United States, primarily through the National Aeronautics and Space Administration (NASA) and the Department of Defense (DoD), however an overarching strategy for management of these national assets was needed. Therefore, in Fiscal Year (FY) 2006 NASA established the Aeronautics Test Program (ATP) as a two-pronged strategic initiative to: (1) retain and invest in NASA aeronautics test capabilities considered strategically important to the agency and the nation, and (2) establish a strong, high level partnership with the DoD Test Resources Management Center (TRMC), stewards of the DoD test and evaluation infrastructure. Since then, approximately seventy percent of the ATP budget has been directed to underpin fixed and variable costs of facility operations within its portfolio and the balance towards strategic investments in its test facilities, including maintenance and capability upgrades. Also, a strong guiding coalition was established through the National Partnership for Aeronautics Testing (NPAT), with governance by the senior leadership of NASA s Aeronautics Research Mission Directorate (ARMD) and the DoD's TRMC. As part of its strategic planning, ATP has performed or participated in many studies and analyses, including assessments of major NASA and DoD aeronautics test capabilities, test facility condition evaluations and market research. The ATP strategy has also benefitted from unpublished RAND research and analysis by Ant n et al. (2009). Together, these various studies, reports and assessments serve as a foundation for a new, five year strategic plan that will guide ATP through FY 2014. Our vision for the future is a balanced

  11. Overview and Analysis of the Japanese and US Innovation Systems

    DEFF Research Database (Denmark)

    Jofre, Sergio

    stresses the dynamics of innovation in connection with evolving environments, economies and societies. The analysis indicates that in the history of both systems there is a clear trend to learn from common success and failures. Therefore, the disparities between the systems observed in previous decades......This paper presents an overview of the Japanese and US national innovation systems. The information is organized, analyzed and discussed in the context of the Triple Helix Model of university-government-industry relationship. Current innovation systems in Japan and the US are in a state...... of transition. Main drivers behind the adaptation process are globalization of economies and sustainable development. Despite historical and cultural disparities, the innovation systems of these countries are evolving towards a common strategy based on the concept of “innovation ecosystems”. This concept...

  12. Comparison of drive systems for pulsed synchronous machines - an overview

    International Nuclear Information System (INIS)

    Baumgart, G.E.; Boenig, H.J.

    1986-01-01

    Magnetically confined plasma fusion experiments require large pulses of energy to be delivered into coil systems. One of the most effective methods of generating these high energy pulses is to convert stored inertial energy into electrical energy. Large synchronous generators of both the vertical and horizontal shaft type have been successfully used for this purpose. As the pulsed energy is delivered to the load, the inertial energy of the rotor of the machine is changed into electrical energy, causing the rotor to slow down. A drive system is required to accelerate the generator from standstill to the maximum operating speed and between load pulses from a reduced operating speed to the maximum speed. There are several types of drive systems that can be used for this application. An overview of six candidate drive systems is presented and comparisons of cost, performance, efficiency and line effects for these systems are described

  13. Comparison of drive systems for pulsed synchronous machines: an overview

    International Nuclear Information System (INIS)

    Baumgart, G.E.; Boenig, H.J.

    1985-01-01

    Magnetically confined plasma fusion experiments require large pulses of energy to be delivered into coil systems. One of the most effective methods of generating these high energy pulses is to convert stored inertial energy into electrical energy. Large synchronous generators of both the vertical and horizontal shaft type have been successfully used for this purpose. As the pulsed energy is delivered to the load, the inertial energy of the rotor of the machine is changed into electrical energy, causing the rotor to slow down. A drive system is required to accelerate the generator from standstill to the maximum operating speed and between load pulses from a reduced operating speed to the maximum speed. There are several types of drive systems that can be used for this application. An overview of six candidate drive systems is presented and comparisons of cost, performance, efficiency, and line effects for these systems are described

  14. Overview

    International Nuclear Information System (INIS)

    Budzanowski, A.

    2002-01-01

    . The value of the baryonic chemical potential consistently decreases down to the value of μ B = 29 MeV at the collision energy √s NN = 200 GeV for the Au + Au system. The time scale of the thermal multifragmentation of 197 Au nuclei induced by a fast proton of the energy of 8.1 GeV was established. It was proved that it is a fast process, with characteristic decay time τ of the order of 10 -22 s. The first observation of the Jacobi shape transition accompanying the fast rotation of the 46 Ti nucleus was made. For the first time, non-hem iron was found in the low - spin state of Fe 2+ which indicates that NHFe initiates the cyclic transport of electrons in photosystem II. The result was published in Applied Organometallic Chemistry. The medium T-matrix theory was developed for superfluid nuclear matter. This new theoretical achievement was published in Phys. Rev. C. Using the ''ab initio'' method for structure calculation of the FeBO 3 compound, a special phase transition with spatial group symmetry unchanged, was found for the metal - isolator and magnetic - nonmagnetic cases. The advantage of the ''ab initio'' method is that the phase transition can be studied in the region of pressure values often difficult to access experimentally. A high level of the concentration of Pu and Am was found in sculls of prehistoric fossil animals. Legal accreditation for measuring individual radiation doses was granted to our second laboratory. Together with the laboratory for scaling and legalizing portable dosimeters, it should resume public services in 2003, hopefully providing some additional income for the Institute. Two doctors obtained their habilitation degrees, and three Associate Professors became full Professors. A group of laboratories from different departments formed a Centre of Excellence in the field of the Quality of Life, which was approved by the European Union. This may help us to obtain additional money for research as well. The Henryk Niewodniczanski prize was

  15. High-level waste immobilization program: an overview

    International Nuclear Information System (INIS)

    Bonner, W.R.

    1979-09-01

    The High-Level Waste Immobilization Program is providing technology to allow safe, affordable immobilization and disposal of nuclear waste. Waste forms and processes are being developed on a schedule consistent with national needs for immobilization of high-level wastes stored at Savannah River, Hanford, Idaho National Engineering Laboratory, and West Valley, New York. This technology is directly applicable to high-level wastes from potential reprocessing of spent nuclear fuel. The program is removing one more obstacle previously seen as a potential restriction on the use and further development of nuclear power, and is thus meeting a critical technological need within the national objective of energy independence

  16. Control system devices : architectures and supply channels overview.

    Energy Technology Data Exchange (ETDEWEB)

    Trent, Jason; Atkins, William Dee; Schwartz, Moses Daniel; Mulder, John C.

    2010-08-01

    This report describes a research project to examine the hardware used in automated control systems like those that control the electric grid. This report provides an overview of the vendors, architectures, and supply channels for a number of control system devices. The research itself represents an attempt to probe more deeply into the area of programmable logic controllers (PLCs) - the specialized digital computers that control individual processes within supervisory control and data acquisition (SCADA) systems. The report (1) provides an overview of control system networks and PLC architecture, (2) furnishes profiles for the top eight vendors in the PLC industry, (3) discusses the communications protocols used in different industries, and (4) analyzes the hardware used in several PLC devices. As part of the project, several PLCs were disassembled to identify constituent components. That information will direct the next step of the research, which will greatly increase our understanding of PLC security in both the hardware and software areas. Such an understanding is vital for discerning the potential national security impact of security flaws in these devices, as well as for developing proactive countermeasures.

  17. Geometric Modeling Applications Interface Program (GMAP). Volume 1. Executive Overview

    Science.gov (United States)

    1989-09-01

    Z . Code) 10. SOURCE OF FUNDING NOS. PROGRAM PROJECT TASK WORK UNIT ELEMENT NO. NO. NO. NO. 11. TITLE (Include Security Classification) GEOMETRIC...342f CI FTR560240OOlU September 1989 SECTION 2 SCOPE OF GMAP GMAP focused on the generacion , control, and exchange of computer information to replace

  18. Energy-Related Inventions Program: an overview of the evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Soderstrom, E.J.; Bronfman, L.M.; Rorke, M.G.

    1983-09-01

    The Energy-Related Inventions Program (ERIP) is jointly administered by the US Departments of Energy and Commerce. Grants were awarded for 165 of 208 inventions recommended by the National Bureau of Standards (NBS). Of the 165 inventions, 46 have been able to acquire follow-on financing from a variety of sources. Further, 35 of the inventions have reached the marketplace, and their cumulative sales to date total $178 million. An additional 10 inventions are now starting into production. Jobs that have been created directly by production related to the inventions total 756; additional spin-off jobs attributable to the inventions include component and material suppliers, jobbers, franchisees, and distributors. The program was recently evaluated at Oak Ridge National Laboratory, with the following conclusions: (1) the evaluation process at NBS has been successful in identifying technically and economically feasible inventions, (2) the success rate for the program is about equivalent to the reported success rates of private venture capital firms, (3) the program is supporting inventions at a point in their development where they are supported by neither the venture capital community nor industry, and (4) the one-time DOE grants and the associated ERIP support to inventors have been successful in readying inventors for follow-on financing from the private sector.

  19. Overview of Gas Research Institute environmental research programs

    International Nuclear Information System (INIS)

    Evans, J.M.

    1991-01-01

    The Gas Research Institute (GRI) is a private not-for-profit membership organization of natural gas pipelines, distribution companies and natural gas producers. GRI's purpose is to plan, to manage and to develop financing for a gas-related research and development (R and D) program on behalf of its members and their customers. GRI does not do any research itself. GRI's R and D program is designed to provide advanced technologies for natural gas supply, transport, storage, distribution and end-use applications in all markets. In addition, basic research is conducted for GRI in these areas to build a foundation for future technology breakthroughs. Work in the Environment and Safety Research Department includes sections interested in: supply related research, air quality research, end use equipment safety research, gas operations safety research, and gas operations environmental research. The Natural Gas Supply Program has research ongoing in such areas as: restoration of pipeline right-of-ways; cleaning up town gas manufacturing sites; the development of methanogenic bacteria for soil and groundwater cleanup; development of biological fluidized carbon units for rapid destruction of carbonaceous compounds; research on liquid redox sulfur recovery for sulfur removal from natural gas; research on produced water and production wastes generated by the natural gas industry; environmental effects of coalbed methane production; and subsurface effects of natural gas operations. The western coalbed methane and ground water programs are described

  20. Solar Program Overview: Fiscal Years 2002& 2003 (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2004-06-01

    This document describes the research activities and accomplishments of the DOE Solar Energy Technologies Program for fiscal years 2002 and 2003. It includes detailed accounts, charts, and photos of R&D activities in the areas of photovoltaics, concentrating solar power, and solar heating and lighting

  1. Computing, Information, and Communications Technology (CICT) Program Overview

    Science.gov (United States)

    VanDalsem, William R.

    2003-01-01

    The Computing, Information and Communications Technology (CICT) Program's goal is to enable NASA's Scientific Research, Space Exploration, and Aerospace Technology Missions with greater mission assurance, for less cost, with increased science return through the development and use of advanced computing, information and communication technologies

  2. Commercial Building Energy Asset Score Program Overview and Technical Protocol (Version 1.1)

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Na; Goel, Supriya; Makhmalbaf, Atefe

    2013-08-09

    The U.S. Department of Energy (DOE) is developing a voluntary national scoring system for commercial buildings to help building owners and managers assess a building’s energy-related systems independent of operations. The goal of the score is to facilitate cost-effective investment in energy efficiency improvements of commercial buildings. The system, known as the Commercial Building Energy Asset Score, will allow building owners and managers to compare their building infrastructure against peers and track building upgrades over time. The system will also help other building stakeholders (e.g., building investors, tenants, financiers, and appraisers) understand the relative efficiency of different buildings in a way that is independent from operations and occupancy. This report outlines the technical protocol used to generate the energy asset score, explains the scoring methodology, and provides additional details regarding the energy asset scoring tool. The alternative methods that were considered prior to developing the current approach are described in the Program Overview and Technical Protocol Version 1.0.

  3. 76 FR 4322 - Charter Schools Program (CSP); Office of Innovation and Improvement; Overview Information...

    Science.gov (United States)

    2011-01-25

    ...; Overview Information; Charter Schools Program (CSP): State Educational Agencies Notice Inviting... rate, high- poverty school, open educational resources, and rural local educational agency are from the... improve high school graduation rates and college enrollment rates in high-poverty schools (as defined in...

  4. 76 FR 14379 - Advanced Placement Incentive Program; Office of Elementary and Secondary Education; Overview...

    Science.gov (United States)

    2011-03-16

    ... Education; Overview Information; Advanced Placement Incentive Program; Notice Inviting Applications for New... attending high-poverty schools. Priorities: This competition includes two absolute priorities and one... through the introduction of advanced courses in high-poverty middle and high schools as well as other...

  5. 76 FR 7175 - Native Hawaiian Education Program; Office of Elementary and Secondary Education; Overview...

    Science.gov (United States)

    2011-02-09

    ... Education; Overview Information; Native Hawaiian Education Program; Notice Inviting Applications for New... this notice) and college enrollment rates in high-poverty schools (as defined in this notice). (e... living in poverty, who are English learners, who are far below grade level or who are not on track to...

  6. 76 FR 5789 - Teaching American History Grant Program; Office of Innovation and Improvement; Overview...

    Science.gov (United States)

    2011-02-02

    ... Improvement; Overview Information; Teaching American History Grant Program; Notice Inviting Applications for... principals who are ineffective, particularly in high-poverty schools (as defined in this notice) including... rates (as defined in this notice) and college enrollment rates in high-poverty schools (as defined in...

  7. Natural language processing in biomedicine: a unified system architecture overview.

    Science.gov (United States)

    Doan, Son; Conway, Mike; Phuong, Tu Minh; Ohno-Machado, Lucila

    2014-01-01

    In contemporary electronic medical records much of the clinically important data-signs and symptoms, symptom severity, disease status, etc.-are not provided in structured data fields but rather are encoded in clinician-generated narrative text. Natural language processing (NLP) provides a means of unlocking this important data source for applications in clinical decision support, quality assurance, and public health. This chapter provides an overview of representative NLP systems in biomedicine based on a unified architectural view. A general architecture in an NLP system consists of two main components: background knowledge that includes biomedical knowledge resources and a framework that integrates NLP tools to process text. Systems differ in both components, which we review briefly. Additionally, the challenge facing current research efforts in biomedical NLP includes the paucity of large, publicly available annotated corpora, although initiatives that facilitate data sharing, system evaluation, and collaborative work between researchers in clinical NLP are starting to emerge.

  8. Overview of the Hanford Site Performance Assurance Program

    International Nuclear Information System (INIS)

    Duncan, M.R.; Billings, M.P.; Delvin, W.L.; Scott, D.D.; Weatherby, J.W.

    1991-01-01

    This paper reports on a safeguards and security performance assurance program which encompasses the routine and special activities carried out to assure that safeguards and security subsystems and components are operating in a effective and reliable manner. At the Hanford Site, performance assurance involves widely varied activities, e.g., force-on-force exercises, functional testing of security components, and limited scope performance testing of material control and accountability subsystems. These activities belong to one of four categories: performance testing, functional testing, inspection, and preventive maintenance. Using categories has aided in identifying and assessing the relevant contribution each activity makes to the performance assurance program. Efforts have progressed toward incorporating performance assurance activities into the assessment of protection effectiveness required for Master Safeguards and Security Agreement development and its associated verification and validation process

  9. Geothermal program overview: Fiscal years 1993--1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    The DOE Geothermal Energy Program is involved in three main areas of research: finding and tapping the resource; power generation; and direct use of geothermal energy. This publication summarizes research accomplishments for FY 1993 and 1994 for the following: geophysical and geochemical technologies; slimhole drilling for exploration; resource assessment; lost circulation control; rock penetration mechanics; instrumentation; Geothermal Drilling Organization; reservoir analysis; brine injection; hot dry rock; The Geysers; Geothermal Technology Organization; heat cycle research; advanced heat rejection; materials development; and advanced brine chemistry.

  10. Overview of the Magnetic Fusion Energy Devlopment and Technology Program

    International Nuclear Information System (INIS)

    1978-03-01

    This publication gives a comprehensive introduction to controlled fusion research. Topics covered in the discussion include the following: (1) fusion system engineering and advanced design, (2) plasma engineering, (3) magnetic systems, (4) materials, (5) environment and safety, and (6) alternate energy applications

  11. Overview of the National Water-Quality Assessment Program

    Science.gov (United States)

    Leahy, P.P.; Thompson, T.H.

    1994-01-01

    The Nation's water resources are the basis for life and our economic vitality. These resources support a complex web of human activities and fishery and wildlife needs that depend upon clean water. Demands for good-quality water for drinking, recreation, farming, and industry are rising, and as a result, the American public is concerned about the condition and sustainability of our water resources. The American public is asking: Is it safe to swim in and drink water from our rivers or lakes? Can we eat the fish that come from them? Is our ground water polluted? Is water quality degrading with time, and if so, why? Has all the money we've spent to clean up our waters, done any good? The U.S. Geological Survey's National Water-Quality Assessment (NAWQA) Program was designed to provide information that will help answer these questions. NAWQA is designed to assess historical, current, and future water-quality conditions in representative river basins and aquifers nationwide. One of the primary objectives of the program is to describe relations between natural factors, human activities, and water-quality conditions and to define those factors that most affect water quality in different parts of the Nation. The linkage of water quality to environmental processes is of fundamental importance to water-resource managers, planners, and policy makers. It provides a strong and unbiased basis for better decisionmaking by those responsible for making decisions that affect our water resources, including the United States Congress, Federal, State, and local agencies, environmental groups, and industry. Information from the NAWQA Program also will be useful for guiding research, monitoring, and regulatory activities in cost effective ways.

  12. Overview and direction in the tandem mirror program

    International Nuclear Information System (INIS)

    Thomassen, K.I.

    1983-04-01

    There are two main thrusts to the tandem mirror program at the present time. One is to gather the experimental data base to verify the axicell thermal-barrier concept and the other to improve the end plugs for tandems. With such improvements one might approach the ideal fusion reactor, a simple solenoid of modular elements whose ends are but a modest perturbation on the configuration from both a cost and technological viewpoint. Progress toward these two goals is discussed here, and the directions to be taken in the immediate future are described

  13. Natural computing for mechanical systems research: A tutorial overview

    Science.gov (United States)

    Worden, Keith; Staszewski, Wieslaw J.; Hensman, James J.

    2011-01-01

    A great many computational algorithms developed over the past half-century have been motivated or suggested by biological systems or processes, the most well-known being the artificial neural networks. These algorithms are commonly grouped together under the terms soft or natural computing. A property shared by most natural computing algorithms is that they allow exploration of, or learning from, data. This property has proved extremely valuable in the solution of many diverse problems in science and engineering. The current paper is intended as a tutorial overview of the basic theory of some of the most common methods of natural computing as they are applied in the context of mechanical systems research. The application of some of the main algorithms is illustrated using case studies. The paper also attempts to give some indication as to which of the algorithms emerging now from the machine learning community are likely to be important for mechanical systems research in the future.

  14. Development of a Cost Effective Power Generation System: An Overview

    Directory of Open Access Journals (Sweden)

    Shiv Prakash Bihari

    2016-03-01

    Full Text Available This paper presents an overview on development of cost effective power generation system and motivates for development of a model for hybrid system with wind to investigate the combined operation of wind with different sources to cater to wind’s stochastic nature for imbalance minimization and optimal operation. Development of model for trading power in competitive electricity market and development of strategies for trading in electricity markets (wind energy and reserves markets to investigate the effects of real time pricing tariffs on electricity market operation has been illustrated in this paper. Dynamic modelling related studies to investigate the wind generator’s kinetic energy for primary frequency support using simulink and simulation studies on doubly fed induction generator to study its capability during small disturbances / fluctuations on power system have been described.

  15. The National Energy Modeling System: An overview 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    The National Energy Modeling System (NEMS) is a computer-based, energy-economy modeling system of US energy markets for the midterm period through 2020. NEMS projects the production, imports, conversion, consumption, and prices of energy, subject to assumptions on macroeconomic and financial factors world energy markets, resource availability and costs, behavior and technological choice criteria, cost and performance characteristics of energy technologies, and demographics. This report presents an overview of the structure and methodology of NEMS and each of its components. The first chapter provides a description of the design and objectives of the system, followed by a chapter on the overall modeling structure and solution algorithm. The remainder of the report summarizes the methodology and scope of the component modules of NEMS. The model descriptions are intended for readers familiar with terminology from economics, operations research, and energy modeling. 21 figs.

  16. An Overview of Clinical Studies on Fiber Post Systems

    Directory of Open Access Journals (Sweden)

    Idil Dikbas

    2013-01-01

    Full Text Available Intraradicular posts are useful adjuncts in the restoration of endodontically treated teeth. These systems have undergone a significant evolution in recent years, and fiber-reinforced systems have started to be incorporated into routine clinical care more frequently. Despite the high number of laboratory studies pertaining to the characteristics of fiber posts, clinical studies evaluating their general success rates are rather limited. Since clinical investigations are reliable means to achieve information about the general behavior pattern of materials or techniques, assessment of this data will be beneficial to have a better understanding of fiber-reinforced intraradicular post systems. The purpose of this paper was to make a summary of clinical studies regarding various fiber posts. A PubMed search was conducted and articles dating back to 1990 were retrieved. The paper provides an overview of clinical studies on fiber posts specifically in the last decade as well as commentary analysis.

  17. Gasoline toxicology: overview of regulatory and product stewardship programs.

    Science.gov (United States)

    Swick, Derek; Jaques, Andrew; Walker, J C; Estreicher, Herb

    2014-11-01

    Significant efforts have been made to characterize the toxicological properties of gasoline. There have been both mandatory and voluntary toxicology testing programs to generate hazard characterization data for gasoline, the refinery process streams used to blend gasoline, and individual chemical constituents found in gasoline. The Clean Air Act (CAA) (Clean Air Act, 2012: § 7401, et seq.) is the primary tool for the U.S. Environmental Protection Agency (EPA) to regulate gasoline and this supplement presents the results of the Section 211(b) Alternative Tier 2 studies required for CAA Fuel and Fuel Additive registration. Gasoline blending streams have also been evaluated by EPA under the voluntary High Production Volume (HPV) Challenge Program through which the petroleum industry provide data on over 80 refinery streams used in gasoline. Product stewardship efforts by companies and associations such as the American Petroleum Institute (API), Conservation of Clean Air and Water Europe (CONCAWE), and the Petroleum Product Stewardship Council (PPSC) have contributed a significant amount of hazard characterization data on gasoline and related substances. The hazard of gasoline and anticipated exposure to gasoline vapor has been well characterized for risk assessment purposes. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

  18. Overview of the department of energy carbon dioxide research program

    International Nuclear Information System (INIS)

    Riches, M.R.; Koomanoff, F.A.

    1985-01-01

    The goal of the Department of Energy (DOE) Carbon Dioxide Research Program is to identify possible policy options for government action in response to effects of increased CO 2 . The achievement of this goal requires a significant increase in our scientific knowledge of the atmosphere, the biosphere, the oceans, and the cryosphere-their interactions and the effects that increasing atmospheric CO 2 and other trace gases will have on them. To identify and specify valid choices, a program of directed research is required. The research areas include: Projection of future atmospheric CO 2 concentrations Estimation of Co 2 -induced global/regional climate changes Estimation of crop and ecosystem response to CO 2 -induced changes Estimation of the effect of CO 2 -induced climate changes on sea level, fisheries, and human health. This paper describes the present DOE plan to address the questions related to the global and regional rate of CO 2 -induced climate change. The objective of the plan is to define the key questions in such a way that research is directed at experiments where answers are needed rather than at experiments where answers can be easily obtained. Only through this kind of focus can we expect to provide the climate-change estimates required for the policy process

  19. Overview of the NAVAIR Spinal Injury Mitigation Program

    National Research Council Canada - National Science Library

    Shender, Barry S; Paskoff, Glenn

    2005-01-01

    ...) for fixed and rotary wing aircraft, e.g. night vision goggles and displays. However, wearing these systems during long duration operations or while exposed to repeated shock, impact, ejection, and crash increases the risk of spinal injury...

  20. Smart health monitoring systems: an overview of design and modeling.

    Science.gov (United States)

    Baig, Mirza Mansoor; Gholamhosseini, Hamid

    2013-04-01

    Health monitoring systems have rapidly evolved during the past two decades and have the potential to change the way health care is currently delivered. Although smart health monitoring systems automate patient monitoring tasks and, thereby improve the patient workflow management, their efficiency in clinical settings is still debatable. This paper presents a review of smart health monitoring systems and an overview of their design and modeling. Furthermore, a critical analysis of the efficiency, clinical acceptability, strategies and recommendations on improving current health monitoring systems will be presented. The main aim is to review current state of the art monitoring systems and to perform extensive and an in-depth analysis of the findings in the area of smart health monitoring systems. In order to achieve this, over fifty different monitoring systems have been selected, categorized, classified and compared. Finally, major advances in the system design level have been discussed, current issues facing health care providers, as well as the potential challenges to health monitoring field will be identified and compared to other similar systems.

  1. Urban Dispersion Program Overview and MID05 Field Study Summary

    Energy Technology Data Exchange (ETDEWEB)

    Allwine, K Jerry; Flaherty, Julia E.

    2007-07-31

    The Urban Dispersion Program (UDP) was a 4-year project (2004–2007) funded by the U.S. Department of Homeland Security with additional support from the Defense Threat Reduction Agency. The U.S. Environmental Protection Agency (EPA) also contributed to UDP through funding a human-exposure component of the New York City (NYC) field studies in addition to supporting an EPA scientist in conducting modeling studies of NYC. The primary goal of UDP was to improve the scientific understanding of the flow and diffusion of airborne contaminants through and around the deep street canyons of NYC. The overall UDP project manager and lead scientist was Dr. Jerry Allwine of Pacific Northwest National Laboratory. UDP had several accomplishments that included conducting two tracer and meteorological field studies in Midtown Manhattan.

  2. Overview of the US program of controls for advanced reactors

    Energy Technology Data Exchange (ETDEWEB)

    White, J.D.; Sackett, J.I.; Monson, R.; Lindsay, R.W.; Carroll, D.G.

    1989-01-01

    An automated control system can incorporate control goals and strategies, assessment of present and future plant status, diagnostic evaluation and maintenance planning, and signal and command validation. It has not been feasible to employ these capabilities in conventional hard-wired, analog, control systems. Recent advances in computer-based digital data acquisition systems, process controllers, fiber-optic signal transmission artificial intelligence tools and methods, and small inexpensive, fast, large-capacity computers---with both numeric and symbolic capabilities---have provided many of the necessary ingredients for developing large, practical automated control systems. Furthermore, recent reactor designs which provide strong passive responses to operational upsets or accidents afford good opportunities to apply these advances in control technology. This paper presents an overall US national perspective for advanced controls research and development. The goals of high reliability, low operating cost and simple operation are described. The staged approach from conceptualization through implementation is discussed. Then the paper describes the work being done by ORNL, ANL and GE. The relationship of this work to the US commercial industry is also discussed.

  3. Overview of the US program of controls for advanced reactors

    International Nuclear Information System (INIS)

    White, J.D.; Sackett, J.I.; Monson, R.; Lindsay, R.W.; Carroll, D.G.

    1989-01-01

    An automated control system can incorporate control goals and strategies, assessment of present and future plant status, diagnostic evaluation and maintenance planning, and signal and command validation. It has not been feasible to employ these capabilities in conventional hard-wired, analog, control systems. Recent advances in computer-based digital data acquisition systems, process controllers, fiber-optic signal transmission artificial intelligence tools and methods, and small inexpensive, fast, large-capacity computers---with both numeric and symbolic capabilities---have provided many of the necessary ingredients for developing large, practical automated control systems. Furthermore, recent reactor designs which provide strong passive responses to operational upsets or accidents afford good opportunities to apply these advances in control technology. This paper presents an overall US national perspective for advanced controls research and development. The goals of high reliability, low operating cost and simple operation are described. The staged approach from conceptualization through implementation is discussed. Then the paper describes the work being done by ORNL, ANL and GE. The relationship of this work to the US commercial industry is also discussed

  4. Overview of space power electronic's technology under the CSTI High Capacity Power Program

    Science.gov (United States)

    Schwarze, Gene E.

    1994-01-01

    The Civilian Space Technology Initiative (CSTI) is a NASA Program targeted at the development of specific technologies in the areas of transportation, operations and science. Each of these three areas consists of major elements and one of the operation's elements is the High Capacity Power element. The goal of this element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA initiatives. The High Capacity Power element is broken down into several subelements that includes energy conversion in the areas of the free piston Stirling power converter and thermoelectrics, thermal management, power management, system diagnostics, and environmental compatibility and system's lifetime. A recent overview of the CSTI High capacity Power element and a description of each of the program's subelements is given by Winter (1989). The goals of the Power Management subelement are twofold. The first is to develop, test, and demonstrate high temperature, radiation-resistant power and control components and circuits that will be needed in the Power Conditioning, Control and Transmission (PCCT) subsystem of a space nuclear power system. The results obtained under this goal will also be applicable to the instrumentation and control subsystem of a space nuclear reactor. These components and circuits must perform reliably for lifetimes of 7-10 years. The second goal is to develop analytical models for use in computer simulations of candidate PCCT subsystems. Circuits which will be required for a specific PCCT subsystem will be designed and built to demonstrate their performance and, also, to validate the analytical models and simulations. The tasks under the Power Management subelement will now be described in terms of objectives, approach and present status of work.

  5. The MSFC Systems Engineering Guide: An Overview and Plan

    Science.gov (United States)

    Shelby, Jerry A.; Thomas, L. Dale

    2007-01-01

    As systems and subsystems requirements become more complex in the pursuit of the exploration of space, advanced technology will demand and require an integrated approach to the design and development of safe and successful space vehicles and there products. System engineers play a vital and key role in transforming mission needs into vehicle requirements that can be verified and validated. This will result in a safe and cost effective design that will satisfy the mission schedule. A key to successful vehicle design within systems engineering is communication. Communication, through a systems engineering infrastructure, will not only ensure that customers and stakeholders are satisfied but will also assist in identifying vehicle requirements; i.e. identification, integration and management. This vehicle design will produce a system that is verifiable, traceable, and effectively satisfies cost, schedule, performance, and risk throughout the life-cycle of the product. A communication infrastructure will bring about the integration of different engineering disciplines within vehicle design. A system utilizing these aspects will enhance system engineering performance and improve upon required activities such as Development of Requirements, Requirements Management, Functional Analysis, Test, Synthesis, Trade Studies, Documentation, and Lessons Learned to produce a successful final product. This paper will describe the guiding vision, progress to date and the plan forward for development of the Marshall Space Flight Center (MSFC) Systems Engineering Guide (SEG), a virtual systems engineering handbook and archive that will describe the system engineering processes that are used by MSFC in the development of complex systems such as the Ares launch vehicle. It is the intent of this website to be a "One Stop Shop" for our systems engineers that will provide tutorial information, an overview of processes and procedures and links to assist system engineering with guidance and

  6. Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

    Science.gov (United States)

    Castner, Ray

    2012-01-01

    The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

  7. Overview of the United States spent nuclear fuel program

    International Nuclear Information System (INIS)

    Hurt, W.L.

    1997-12-01

    As a result of the end of the Cold War, the mission of the US Department of Energy (DOE) has shifted from an emphasis on nuclear weapons development and production to an emphasis on the safe management and disposal of excess nuclear materials including spent nuclear fuel from both production and research reactors. Within the US, there are two groups managing spent nuclear fuel. Commercial nuclear power plants are managing their spent nuclear fuel at the individual reactor sites until the planned repository is opened. All other spent nuclear fuel, including research reactors, university reactors, naval reactors, and legacy material from the Cold War is managed by DOE. DOE's mission is to safely and efficiently manage its spent nuclear fuel and prepare it for disposal. This mission involves correcting existing vulnerabilities in spent fuel storage; moving spent fuel from wet basins to dry storage; processing at-risk spent fuel; and preparing spent fuel in road-ready condition for repository disposal. Most of DOE's spent nuclear fuel is stored in underwater basins (wet storage). Many of these basins are outdated, and spent fuel is to be removed and transferred to more modern basins or to new dry storage facilities. In 1995, DOE completed a complex-wide environmental impact analysis that resulted in spent fuel being sent to one of three principal DOE sites for interim storage (up to 40 years) prior to shipment to a repository. This regionalization by fuel type will allow for economies of scale yet minimize unnecessary transportation. This paper discusses the national SNF program, ultimate disposition of SNF, and the technical challenges that have yet to be resolved, namely, release rate testing, non-destructive assay, alternative treatments, drying, and chemical reactivity

  8. Overview of U.S. Fast Reactor Technology Program

    International Nuclear Information System (INIS)

    Hill, Robert

    2013-01-01

    • Concept development studies guide R&D tasks by evaluating system impact for broad variety of technology options: – Small-scale facilities for R&D on key technology; – No near-term plan for demonstration reactor. • Fast reactor R&D is focused on key technologies innovations for performance improvement (cost reduction): – Advanced Structural Materials; – Advanced Energy Conversion; – Advanced Modeling and Simulation. • Other R&D is conducted to address known technology challenges: – Safety and Licensing; – Fuels Development; – Undersodium Viewing

  9. Building heating and cooling applications thermal energy storage program overview

    Science.gov (United States)

    Eissenberg, D. M.

    1980-01-01

    Thermal energy storage technology and development of building heating and cooling applications in the residential and commercial sectors is outlined. Three elements are identified to undergo an applications assessment, technology development, and demonstration. Emphasis is given to utility load management thermal energy system application where the stress is on the 'customer side of the meter'. Thermal storage subsystems for space conditioning and conservation means of increased thermal mass within the building envelope and by means of low-grade waste heat recovery are covered.

  10. An overview of the United Kingdom Atomic Energy Authority's active handling and robotics program

    International Nuclear Information System (INIS)

    Sanders, B.C.; Abel, E.; Brown, M.H.; Cole, G.V.; White, L.J.

    1987-01-01

    The United Kingdom Atomic Energy Authority (UKAEA) has a wide ranging research and development program in active handling equipment and this is now being extended into the application of teleoperators and robotics. As a direct spin-off from this work the Harwell Laboratory is undertaking a feasibility study into the application of advanced robotics in the nuclear industry for an initiative by the Department of Trade and Industry (DTI). Together with the Culham Laboratory and Industry, an R and D program into the application of robotics in space is being undertaken. This paper is an overview of these and associated programs giving the background and content of the work being undertaken

  11. Space Telecommunications Radio System (STRS) Architecture. Part 1; Tutorial - Overview

    Science.gov (United States)

    Handler, Louis M.; Briones, Janette C.; Mortensen, Dale J.; Reinhart, Richard C.

    2012-01-01

    Space Telecommunications Radio System (STRS) Architecture Standard provides a NASA standard for software-defined radio. STRS is being demonstrated in the Space Communications and Navigation (SCaN) Testbed formerly known as Communications, Navigation and Networking Configurable Testbed (CoNNeCT). Ground station radios communicating the SCaN testbed are also being written to comply with the STRS architecture. The STRS Architecture Tutorial Overview presents a general introduction to the STRS architecture standard developed at the NASA Glenn Research Center (GRC), addresses frequently asked questions, and clarifies methods of implementing the standard. The STRS architecture should be used as a base for many of NASA s future telecommunications technologies. The presentation will provide a basic understanding of STRS.

  12. An overview of the Earth system science of solar geoengineering: Overview of the earth system science of solar geoengineering

    Energy Technology Data Exchange (ETDEWEB)

    Irvine, Peter J. [Institute for Advanced Sustainability Studies (IASS), Potsdam Germany; John A. Paulson School of Engineering and Applied Sciences (SEAS), University of Harvard, Cambridge MA USA; Kravitz, Ben [Atmospheric Sciences and Global Change Division, Pacific Northwest National Laboratory, Richland WA USA; Lawrence, Mark G. [Institute for Advanced Sustainability Studies (IASS), Potsdam Germany; Muri, Helene [Department of Geosciences, University of Oslo, Oslo Norway

    2016-07-14

    Solar geoengineering has been proposed as a means to cool the planet by increasing the reflection of sunlight back to space, for example by injecting reflective aerosol particles into the middle atmosphere. Such proposals are not able to physically substitute for mitigation of greenhouse gas emissions as a response to the risks of climate change, but might eventually be applied as a complementary approach to reduce climate risks. Thus, the Earth system consequences of solar geoengineering are central to understanding its potentials and risks. Here we review the state-of-the-art knowledge about geoengineering by stratospheric sulphate aerosol injection. We examine the common responses found in studies of an idealized form of solar geoengineering, in which the intensity of incoming sunlight is directly reduced in models. The studies reviewed are consistent in suggesting that solar geoengineering would generally reduce the differences in climate in comparison to future scenarios with elevated greenhouse gas concentrations and no solar geoengineering. However, it is clear that a solar geoengineered climate would be novel in some respects, for example a notable reduction in the intensity of the hydrological cycle. We provide an overview of the unique aspects of the response to stratospheric aerosol injection and the uncertainties around its consequences. We also consider the issues raised by the partial control over the climate that solar geoengineering would allow. Finally, this overview also highlights the key research gaps that will need to be resolved in order to effectively guide future decisions on the potential use of solar geoengineering.

  13. Earth Observing Data System Data and Information System (EOSDIS) Overview

    Science.gov (United States)

    Klene, Stephan

    2016-01-01

    The National Aeronautics and Space Administration (NASA) acquires and distributes an abundance of Earth science data on a daily basis to a diverse user community worldwide. The NASA Big Earth Data Initiative (BEDI) is an effort to make the acquired science data more discoverable, accessible, and usable. This presentation will provide a brief introduction to the Earth Observing System Data and Information System (EOSDIS) project and the nature of advances that have been made by BEDI to other Federal Users.

  14. Overview of MFTF supervisory control and diagnostics system software

    International Nuclear Information System (INIS)

    Ng, W.C.

    1979-01-01

    The Mirror Fusion Test Facility (MFTF) at the Lawrence Livermore Laboratory (LLL) is currently the largest mirror fusion research project in the world. Its Control and Diagnostics System is handled by a distributed computer network consisting of nine Interdata minicomputer systems and about 65 microprocessors. One of the design requirements is tolerance of single-point failure. If one of the computer systems becomes inoperative, the experiment can still be carried out, although the system responsiveness to operator command may be degraded. In a normal experiment cycle, the researcher can examine the result of the previous experiment, change any control parameter, fire a shot, collect four million bytes of diagnostics data, perform intershot analysis, and have the result presented - all within five minutes. The software approach adopted for the Supervisory Control and Diagnostics System features chief programmer teams and structured programming. Pascal is the standard programming language in this project

  15. Fuel cell program - Overview reports 2007; Programm Brennstoffzellen inkl. Wasserstoff - Ueberblicksberichte der BFE-Programmleiter 2007

    Energy Technology Data Exchange (ETDEWEB)

    Luzzi, A.; Spirig, M.

    2008-07-01

    This report for the Swiss Federal Office of Energy (SFOE) presents the overview reports made by SFOE Heads of Program on work done in 2007. Projects reported on in the natural gas-fired fuel cell area include the EU-project REAL-SFOC, the long-term testing of anode-supported SOFC stacks, intermediate-temperature fuel cells based on proton conducting electrolytes, the interdisciplinary ONEBAT project and lifetime-enhancement of SOFC stacks for CHP applications. In the polymer-electrolyte fuel cell (PEFC) area, projects concerning proton-conducting polymer membranes, factors limiting the lifetime of fuel cell membranes, a new highly active oxygen reduction electrode for PEM fuel cell and zinc/air battery applications, the enhancement of PEFC durability and reliability, model-based investigation of PEFC performance, and local gas analysis of PE fuel cells are briefly reported on. Long-term research activities in the hydrogen technology area reported on include those concerning the photo-chemical conversion and storage of solar energy and the storage of hydrogen in metallic and complex hydrides. Further projects reported on include those concerning the physical aspects of hydrides for system integration and safety and new, complex metal hydrides. Swiss national and international co-ordination is reviewed in the areas of fuel cell technology and hydrogen technology. Work done in several projects run within the framework of the IEA's Advanced Fuel Cells Program is reviewed. Several pilot and demonstration (P and D) projects are also reported on in the natural-gas SOFC and PEFC areas. Comments on the 2007 results and a review of work to be done in 2008, along with a list of R, D, P and D projects, complete the report.

  16. Overview of ORNL/NRC programs addressing durability of concrete structures

    International Nuclear Information System (INIS)

    Naus, D.J.; Oland, C.B.

    1994-01-01

    The role of reinforced concrete relative to its applications as either safety-related structures in nuclear power or engineered barriers of low-level radioactive waste disposal facilities is described. Factors that can affect the long-term durability of reinforced concrete are identified. Overviews are presented of the Structural Aging Program, which is addressing the aging management of safety-related concrete structures in nuclear power plants, and the Permeability Test Methods and Data Program, which is identifying pertinent data and information for use in performance assessments of engineered barriers for low-level radioactive waste disposal

  17. Overview of the SwissPlus Implant System.

    Science.gov (United States)

    Gunaseelan, R; Rajan, Manoj

    2005-01-01

    Although many improvements have been made to implant dentistry during the last quarter of a century, clinical challenges still remain. For the surgeon, achieving implant stability in low-density bone can be difficult. For the restorative dentist, incompatibility between implant systems and the increasing complexity of esthetic restorative options frequently require special training in the selection and use of prosthetic components. This article presents an overview of a 1-stage implant system with a textured surface and osteocompressive surgical protocol designed to achieve stability in soft bone. Self-tapping, double lead threads and a separate surgical protocol also enable the implant to be placed in high-density bone. The implant is packaged on a fixture mount that also functions as a transfer and transitional or definitive abutment for cemented restorations. This implant is designed to help simplify restorative procedures by eliminating many ancillary restorative components. For multiple-unit, screw-retained restorations, the prosthesis can be splinted directly to the top of the implant without an intermediate abutment. Overdenture attachments and straight, angled, screw-receiving, and custom-cast abutments complete the restorative system.

  18. Manufactured residential utility wall system (ResCore), overview

    Energy Technology Data Exchange (ETDEWEB)

    Wendt, R. [Oak Ridge National Lab., TN (United States); Lundell, C.; Lau, T.M. [Auburn Univ., AL (United States)

    1997-05-01

    This paper provides an overview of the design and development of a manufactured residential utility wall system referred to as ResCore. ResCore is a self-contained, manufactured, residential utility wall that provides complete rough-in of utilities (power, gas, water, and phone) and other functions (exhaust, combustion make-up air, refrigerant lines, etc.) to serve the residential kitchen, bath, utility, and laundry rooms. Auburn University, Department of Industrial Design faculty and students, supported by a team of graduate student researchers and the project`s advisory team, developed the ResCore. The project was accomplished through a research subcontract from the US Department of Energy administered by the Oak Ridge National Laboratory. The ResCore wall system features a ``layered`` manufacturing technique that allows each major component group--structural, cold water, hot water, drain, gas, electric, etc.--to be built as a separate subassembly and easily brought together for final assembly. The two structural layers are reinforced with bridging that adds strength and also permits firm attachment of plumbing pipes and other systems to the wall frame.

  19. Overview study of LNG release prevention and control systems

    Energy Technology Data Exchange (ETDEWEB)

    Pelto, P.J.; Baker, E.G.; Holter, G.M.; Powers, T.B.

    1982-03-01

    The liquefied natural gas (LNG) industry employs a variety of release prevention and control techniques to reduce the likelihood and the consequences of accidental LNG releases. A study of the effectiveness of these release prevention and control systems is being performed. Reference descriptions for the basic types of LNG facilities were developed. Then an overview study was performed to identify areas that merit subsequent and more detailed analyses. The specific objectives were to characterize the LNG facilities of interest and their release prevention and control systems, identify possible weak links and research needs, and provide an analytical framework for subsequent detailed analyses. The LNG facilities analyzed include a reference export terminal, marine vessel, import terminal, peakshaving facility, truck tanker, and satellite facility. A reference description for these facilities, a preliminary hazards analysis (PHA), and a list of representative release scenarios are included. The reference facility descriptions outline basic process flows, plant layouts, and safety features. The PHA identifies the important release prevention operations. Representative release scenarios provide a format for discussing potential initiating events, effects of the release prevention and control systems, information needs, and potential design changes. These scenarios range from relatively frequent but low consequence releases to unlikely but large releases and are the principal basis for the next stage of analysis.

  20. Overview and Status of the Ceph File System

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    The Ceph file system (CephFS) is the POSIX-compatible distributed file system running on top of Ceph's powerful and stable object store. This presentation will give a general introduction of CephFS and detail the recent work the Ceph team has done to improve its stability and usability. In particular, we will cover directory fragmentation, multiple active metadata servers, and directory subtree pinning to metadata servers, features slated for stability in the imminent Luminous release. This talk will also give an overview of how we are measuring performance of multiple active metadata servers using large on-demand cloud deployments. The results will highlight how CephFS distributes metadata load across metadata servers to achieve scaling. About the speaker Patrick Donnelly is a software engineer at Red Hat, Inc. currently working on the Ceph distributed file system. In 2016 he completed his Ph.D. in computer science at the University of Notre Dame with a dissertation on the topic of file transfer management...

  1. Solar Dynamics Observatory Guidance, Navigation, and Control System Overview

    Science.gov (United States)

    Morgenstern, Wendy M.; Bourkland, Kristin L.; Hsu, Oscar C.; Liu, Kuo-Chia; Mason, Paul A. C.; O'Donnell, James R., Jr.; Russo, Angela M.; Starin, Scott R.; Vess, Melissa F.

    2011-01-01

    The Solar Dynamics Observatory (SDO) was designed and built at the Goddard Space Flight Center, launched from Cape Canaveral on February 11, 2010, and reached its final geosynchronous science orbit on March 16, 2010. The purpose of SDO is to observe the Sun and continuously relay data to a dedicated ground station. SDO remains Sun-pointing throughout most of its mission for the instruments to take measurements of the Sun. The SDO attitude control system (ACS) is a single-fault tolerant design. Its fully redundant attitude sensor complement includes sixteen coarse Sun sensors (CSSs), a digital Sun sensor (DSS), three two-axis inertial reference units (IRUs), and two star trackers (STs). The ACS also makes use of the four guide telescopes included as a part of one of the science instruments. Attitude actuation is performed using four reaction wheels assemblies (RWAs) and eight thrusters, with a single main engine used to provide velocity-change thrust for orbit raising. The attitude control software has five nominal control modes, three wheel-based modes and two thruster-based modes. A wheel-based Safehold running in the attitude control electronics box improves the robustness of the system as a whole. All six modes are designed on the same basic proportional-integral-derivative attitude error structure, with more robust modes setting their integral gains to zero. This paper details the final overall design of the SDO guidance, navigation, and control (GN&C) system and how it was used in practice during SDO launch, commissioning, and nominal operations. This overview will include the ACS control modes, attitude determination and sensor calibration, the high gain antenna (HGA) calibration, and jitter mitigation operation. The Solar Dynamics Observatory mission is part of the NASA Living With a Star program, which seeks to understand the changing Sun and its effects on the Solar System, life, and society. To this end, the SDO spacecraft carries three Sun

  2. Overview and Insights from ‘Systems Education for a Sustainable Planet’

    Directory of Open Access Journals (Sweden)

    Robert Y. Cavana

    2018-02-01

    Full Text Available An announcement by Bosch and Cavana, in Systems, called for new papers to provide updated perspectives about and fresh insights into developments that influence ‘systems education for a sustainable planet’. This paper’s objective is to provide an overview of the 14 papers that were published in the special issue, and present some insights and findings from their content. It does this by classifying the papers into five distinct themes, then analysing their content and the linkages between the themes. This process revealed that: (1 Specialised systems education at a tertiary level is predominantly at graduate level, using a diverse range of approaches; and (2 Delivering specialised systems education remains a challenge for programs that endeavour to provide an integrated and interdisciplinary learning experience. Barriers include current institutional structures and the need for students to be both big picture thinkers and detail-oriented technocrats; (3 Teaching systems approaches outside of specialised programs for students (both young and mature help to expose systems thinking to a wider demographic; (4 The strong links that exist between systems approaches and sustainability goals are increasingly being recognised. Systems education can help transition towards a sustainable planet, as it helps people appreciate that individual actions are not isolated events but contribute to an interconnected system that determines both the well-being of humans and the planet.

  3. Overview of nuclear education and outreach program among Malaysian school students

    Science.gov (United States)

    Sahar, Haizum Ruzanna; Masngut, Nasaai; Yusof, Mohd Hafizal; Ngadiron, Norzehan; Adnan, Habibah

    2017-01-01

    This paper gives an overview of nuclear education and outreach program conducted by Agensi Nuklear Malaysia (Nuklear Malaysia) throughout its operation and establishment. Since its foundation in 1972, Nuklear Malaysia has been the pioneer and is competent in the application of nuclear science and technology. Today, Nuklear Malaysia has ventured and eventually contributed into the development of various socio-economic sectors which include but not limited to medical, industry, manufacturing, agriculture, health, radiation safety and environment. This paper accentuates on the history of education and outreach program by Nuklear Malaysia, which include its timeline and evolution; as well as a brief on education and outreach program management, involvement of knowledge management as part of its approach and later the future of Nuklear Malaysia education and outreach program.

  4. Hanford Waste Vitrification Plant quality assurance program description: Overview and applications

    International Nuclear Information System (INIS)

    Caplinger, W.H.

    1990-12-01

    This document describes the Hanford Waste Vitrification Plant Project Quality Assurance Program. This program is being implemented to ensure the acceptability of high-level radioactive canistered waste forms produced by the Hanford Waste Vitrification Plant for disposal in a licensed federal repository. The Hanford Waste Vitrification Plant Quality Assurance Program is comprised of this Quality Assurance Program Description as well as the associated contractors' quality assurance programs. The objective of this Quality Assurance Program Description is to provide the Hanford Waste Vitrification Plant Project participants with guidance and direction for program implementation while satisfying the US Department of Energy Office of Civilian Radioactive Waste Management needs in repository licensing activities with regard to canistered waste forms. To accomplish this objective, this description will be prepared in three parts: Part 1 - Overview and applications document; Part 2 - Development and qualification of the canistered waste form; Part 3 - Production of canistered waste forms. Part 1 describes the background, strategy, application, and content of the Hanford Waste Vitrification Plant Quality Assurance Program. This Quality Assurance Program Description, when complete, is designed to provide a level of confidence in the integrity of the canistered waste forms. 8 refs

  5. Overview of SDT and EIT analysis in DVB systems

    Directory of Open Access Journals (Sweden)

    Denes Dalmi

    2008-03-01

    Full Text Available This article presents the service information in the digital broadcasting systems (DVB. It gives some details about the transport stream and about some special information, which is contained by different tables. The transport stream is a communication protocol for audio, video and data transmission, which is specified in the MPEG-2 systems. A service description table (SDT contains data describing the services in the system. An event information table (EIT comprises data, which specifies the events or the programs, such as event name, start time and duration. Finally, a transport stream analyzer program will be introduced, which is responsible for gathering information from SDT and EIT tables. The application processes the descriptors belonging to the corresponding tables and displays the data from these tables.

  6. Super Energy Savings Performance Contracts: Federal Energy Management Program (FEMP) Program Overview (revision)

    International Nuclear Information System (INIS)

    Pitchford, P.

    2001-01-01

    This four-page publication describes the U.S. Department of Energy's (DOE's) streamlined energy savings performance contracting, or ''Super ESPC,'' process, which is managed by DOE's Federal Energy Management Program (FEMP). Under a Super ESPC, a qualifying energy service company (ESCO) from the private sector pays for energy efficiency improvements or advanced renewable energy technologies (e.g., photovoltaic systems, wind turbines, or geothermal heat pumps, among others) for a facility of a government agency. The ESCO is then repaid over time from the agency's resulting energy cost savings. Delivery orders under these contracts specify the level of performance (energy savings) and the repayment schedule; the contract term can be up to 25 years, although many Super ESPCs are for about 10 years or less

  7. Preliminary design study of the TMT Telescope structure system: overview

    Science.gov (United States)

    Usuda, Tomonori; Ezaki, Yutaka; Kawaguchi, Noboru; Nagae, Kazuhiro; Kato, Atsushi; Takaki, Junji; Hirano, Masaki; Hattori, Tomoya; Tabata, Masaki; Horiuchi, Yasushi; Saruta, Yusuke; Sofuku, Satoru; Itoh, Noboru; Oshima, Takeharu; Takanezawa, Takashi; Endo, Makoto; Inatani, Junji; Iye, Masanori; Sadjadpour, Amir; Sirota, Mark; Roberts, Scott; Stepp, Larry

    2014-07-01

    We present an overview of the preliminary design of the Telescope Structure System (STR) of Thirty Meter Telescope (TMT). NAOJ was given responsibility for the TMT STR in early 2012 and engaged Mitsubishi Electric Corporation (MELCO) to take over the preliminary design work. MELCO performed a comprehensive preliminary design study in 2012 and 2013 and the design successfully passed its Preliminary Design Review (PDR) in November 2013 and April 2014. Design optimizations were pursued to better meet the design requirements and improvements were made in the designs of many of the telescope subsystems as follows: 1. 6-legged Top End configuration to support secondary mirror (M2) in order to reduce deformation of the Top End and to keep the same 4% blockage of the full aperture as the previous STR design. 2. "Double Lower Tube" of the elevation (EL) structure to reduce the required stroke of the primary mirror (M1) actuators to compensate the primary mirror cell (M1 Cell) deformation caused during the EL angle change in accordance with the requirements. 3. M1 Segment Handling System (SHS) to be able to make removing and installing 10 Mirror Segment Assemblies per day safely and with ease over M1 area where access of personnel is extremely difficult. This requires semi-automatic sequence operation and a robotic Segment Lifting Fixture (SLF) designed based on the Compliance Control System, developed for controlling industrial robots, with a mechanism to enable precise control within the six degrees of freedom of position control. 4. CO2 snow cleaning system to clean M1 every few weeks that is similar to the mechanical system that has been used at Subaru Telescope. 5. Seismic isolation and restraint systems with respect to safety; the maximum acceleration allowed for M1, M2, tertiary mirror (M3), LGSF, and science instruments in 1,000 year return period earthquakes are defined in the requirements. The Seismic requirements apply to any EL angle, regardless of the

  8. Overview of the Defense Programs Research and Technology Development Program for fiscal year 1993. Appendix materials

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-30

    The pages that follow contain summaries of the nine R&TD Program Element Plans for Fiscal Year 1993 that were completed in the Spring of 1993. The nine program elements are aggregated into three program clusters as follows: Design Sciences and Advanced Computation; Advanced Manufacturing Technologies and Capabilities; and Advanced Materials Sciences and Technology.

  9. C/SCSC overview: approach, implementation, use. [Cost/Schedule Control Systems Criteria

    Energy Technology Data Exchange (ETDEWEB)

    Turf, Larry

    1979-01-01

    An overview of the Cost/Schedule Control System Criteria, known as C/SCS or C/S Squared is pesented. In the mid-1960s, several DOD service agencies embarked on a new performance measurement concept to track cost and schedule performance on major DOD programs. The performance measurement concept of C/SCS has expanded from DOD use to the Department of Energy (PMS), NASA (533 reports), and private industry such as shipbuilding, utilities, and construction. This paper describes the C/SCSC with the events leading to the C/SCS requirement, how to approach the requirement, and discusses implementing and using the system. Many government publications, directives, and instructions on the subject are listed in the publication.

  10. An Overview and Funding History of Select Department of Justice (DOJ) Grant Programs

    National Research Council Canada - National Science Library

    James, Nathan

    2006-01-01

    ...), and the Office of Violence Against Women, provide grant funds to state, local, and tribal governments for crime prevention and intervention programs as well as funding for criminal justice system improvement programs...

  11. Small Water System Management Program: 100 K Area

    International Nuclear Information System (INIS)

    Hunacek, G.S. Jr.

    1995-01-01

    Purposes of this document are: to provide an overview of the service and potable water system presently in service at the Hanford Site's 100 K Area; to provide future system forecasts based on anticipated DOE activities and programs; to delineate performance, design, and operations criteria; and to describe planned improvements. The objective of the small water system management program is to assure the water system is properly and reliably managed and operated, and continues to exist as a functional and viable entity in accordance with WAC 246-290-410

  12. Computer aided system engineering and analysis (CASE/A) modeling package for ECLS systems - An overview

    Science.gov (United States)

    Dalee, Robert C.; Bacskay, Allen S.; Knox, James C.

    1990-01-01

    An overview of the CASE/A-ECLSS series modeling package is presented. CASE/A is an analytical tool that has supplied engineering productivity accomplishments during ECLSS design activities. A components verification program was performed to assure component modeling validity based on test data from the Phase II comparative test program completed at the Marshall Space Flight Center. An integrated plotting feature has been added to the program which allows the operator to analyze on-screen data trends or get hard copy plots from within the CASE/A operating environment. New command features in the areas of schematic, output, and model management, and component data editing have been incorporated to enhance the engineer's productivity during a modeling program.

  13. Computer programming and computer systems

    CERN Document Server

    Hassitt, Anthony

    1966-01-01

    Computer Programming and Computer Systems imparts a "reading knowledge? of computer systems.This book describes the aspects of machine-language programming, monitor systems, computer hardware, and advanced programming that every thorough programmer should be acquainted with. This text discusses the automatic electronic digital computers, symbolic language, Reverse Polish Notation, and Fortran into assembly language. The routine for reading blocked tapes, dimension statements in subroutines, general-purpose input routine, and efficient use of memory are also elaborated.This publication is inten

  14. An overview of U.S. predoctoral dental implant programs and their directors.

    Science.gov (United States)

    Barwacz, Christopher A; Avila-Ortiz, Gustavo; Allareddy, Veerasathpurush; Tamegnon, Monelle; Hoogeveen, Kaitlin

    2015-03-01

    The aim of this study was to provide an overview of current predoctoral implant programs in the United States, including curricular characteristics and clinical practices regarding implant therapy education and program directors' characteristics. An electronic survey was sent to predoctoral implant program directors of all 64 accredited U.S. dental schools; 52 of the 60 eligible programs responded, for a response rate of 87%. The responding program directors were primarily affiliated with either prosthodontics departments (44%) or restorative dentistry departments (40%). Structurally, 80.8% of the responding schools integrate their implant programs into the third year of the curriculum. Clinical implant therapy exercises reported were simulation exercises without direct patient care (90.4% of responding schools) and direct patient care under supervision (94.2%). The most frequently taught restorative modalities are posterior single-tooth implant crown (96.2%), mandibular implant-retained overdenture (88.5%), and anterior implant-supported single crown (61.5%). A majority (74.5%) of responding programs utilize analog surgical guide planning, while 25.5% reported use of digital guided surgery planning software. All schools in the Northwest and 66.7% in the South Central regions utilize custom abutments as the primary abutment design, while a majority of schools in the North Central (62.5%), Northeast (53.8%), Southwest (66.7%), and Southeast (80%) regions use stock abutments (p=0.02). Regional differences were significant with regard to fixation modality, with all the Northwest programs using screw retention and 90% of Southeast and 87.5% of North Central programs using cement retention (p=0.002). This study demonstrated that while institutions share program director and curricular similarities, clinical practices and modalities vary significantly by region.

  15. Planning-Programming-Budgeting Systems.

    Science.gov (United States)

    Tudor, Dean

    Planning Programming and Budgeting Systems (PPBS) have been considered as either synonymous with abstract, advanced, mathematical systems analysis or as an advanced accounting and control system. If PPBS is to perform a useful function, both viewpoints must be combined such that a number of standardized procedures and reports are required and…

  16. Environmental program overview for a high-level radioactive waste repository at Yucca Mountain

    International Nuclear Information System (INIS)

    1988-12-01

    The United States plans to begin operating the first repository for the permanent disposal of high-level nuclear waste early in the next century. In February 1983, the US Department of Energy (DOE) identified Yucca Mountain, in Nevada, as one of nine potentially acceptable sites for a repository. To determine its suitability, the DOE evaluated the Yucca Mountain site, along with eight other potentially acceptable sites, in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. The purpose of the Environmental Program Overview (EPO) for the Yucca Mountain site is to provide an overview of the overall, comprehensive approach being used to satisfy the environmental requirements applicable to sitting a repository at Yucca Mountain. The EPO states how the DOE will address the following environmental areas: aesthetics, air quality, cultural resources (archaeological and Native American components), noise, radiological studies, soils, terrestrial ecosystems, and water resources. This EPO describes the environmental program being developed for the sitting of a repository at Yucca Mountain. 1 fig., 3 tabs

  17. Reducing Youth Gun Violence. Part One--An Overview [and] Part Two--Prevention and Intervention Programs.

    Science.gov (United States)

    McEvoy, Alan, Ed.

    1996-01-01

    This document contains two issues of a journal on reducing youth gun violence, reprinted from a report by the U.S. Department of Justice. The first issue, part one, provides an overview of programs and initiatives. The second issue, part two, describes prevention and intervention programs. To reduce violence and build healthy communities requires…

  18. Overview of HTGR heat utilization system development at JAERI

    International Nuclear Information System (INIS)

    Miyamoto, Y.; Shiozawa, S.; Ogawa, M.; Akino, N.; Shimizu, S.; Hada, K.; Inagaki, Y.; Onuki, K.; Takeda, T.; Nishihara, T.

    1998-01-01

    The Japan Atomic Energy Research Institute (JAERI) has conducted research and development of nuclear heat utilization systems of a High Temperature Gas cooled Reactor (HTGR), which are capable to meet a large amount of energy demand without significant CO 2 emission to relax the global warming issue. The High Temperature engineering Test Reactor (HTTR) with thermal output of 30 MW and outlet coolant temperature of 950 deg C, the first HTGR in Japan, is under construction on the JAERI site, and its first criticality is scheduled for mid-1998. After the reactor performance and safety demonstration tests for several years, a hydrogen production system will be connected to the HTTR. A demonstration program on hydrogen production started in January 1997, in JAERI, as a study consigned by the Science and Technology Agency. A hydrogen production system connected to the HTTR is designed to be able to produce hydrogen by steam reforming of natural gas, using nuclear heat of 10 MW from the HTTR. The safety principle and standard are investigated for the HTTR hydrogen production system. In order to confirm safety, controllability and performance of key components in the HTTR hydrogen production system, an out-of-pile test facility on the scale of approximately 1/30 of the HTTR hydrogen production system is installed. It is equipped with an electric heater as a heat source instead of the HTTR. The out-of-pile test will be performed for four years after 2001. The HTTR hydrogen production system will be demonstratively operated after 2005 at its earliest plan. Other basic studies on the hydrogen production system using thermochemical water splitting, an iodine sulphur (IS) process, and technology of distant heat transport with microencapsulated phase change material have been carried out for more effective and various uses of nuclear heat. (author)

  19. Overview of Causes and Control of Nitrification in Chloraminated Drinking Water Distribution Systems

    Science.gov (United States)

    This chapter provides an integrated overview of nitrification causes and control in chloraminated drinking water distribution systems, leading to an in-depth discussion of nitrification microbiology, monitoring, prevention, response, and engineering improvements in subsequent man...

  20. Overview of external reference pricing systems in Europe.

    Science.gov (United States)

    Rémuzat, Cécile; Urbinati, Duccio; Mzoughi, Olfa; El Hammi, Emna; Belgaied, Wael; Toumi, Mondher

    2015-01-01

    External reference pricing (ERP) is a price regulation tool widely used by policy makers in the European Union (EU) Member States (MS) to contain drug cost, although in theory, it may contribute to modulate prices up and down. The objective of this article was to summarise and discuss the main findings of part of a large project conducted for the European Commission ('External reference pricing of medicinal products: simulation-based considerations for cross-country coordination'; see www.ec.europa.eu/health/healthcare/docs/erp_reimbursement_medicinal_products_en.pdf) that aimed to provide an overview of ERP systems, both on processes and potential issues in 31 European countries (28 EU MS, Iceland, Norway, and Switzerland). A systematic structured literature review was conducted to identify and characterise the use of ERP in the selected countries, to describe its impact on the prices of pharmaceuticals, and to discuss the possible cross-country coordination issues in EU MS. This research was complemented with a consultation of competent authorities' and international organisations' representatives to address the main issues or uncertainties identified through the literature review. All selected countries applied ERP, except the United Kingdom and Sweden. Twenty-three countries used ERP as the main systematic criterion for pricing. In the majority of European countries, ERP was based on legislated pricing rules with different levels of accuracy. ERP was applied either for all marketed drugs or for specific categories of medicines; it was mainly used for publicly reimbursed medicines. The number of reference countries included in the basket varied from 1 to 31. There was a great variation in the calculation methods used to compute the price; 15 countries used the average price, 7 countries used the lowest price, and 7 countries used other calculation methods. Reported limitations of ERP application included the lack of reliable sources of price information, price

  1. Space Transportation System Liftoff Debris Mitigation Process Overview

    Science.gov (United States)

    Mitchell, Michael; Riley, Christopher

    2011-01-01

    Liftoff debris is a top risk to the Space Shuttle Vehicle. To manage the Liftoff debris risk, the Space Shuttle Program created a team with in the Propulsion Systems Engineering & Integration Office. The Shutt le Liftoff Debris Team harnesses the Systems Engineering process to i dentify, assess, mitigate, and communicate the Liftoff debris risk. T he Liftoff Debris Team leverages off the technical knowledge and expe rtise of engineering groups across multiple NASA centers to integrate total system solutions. These solutions connect the hardware and ana lyses to identify and characterize debris sources and zones contribut ing to the Liftoff debris risk. The solutions incorporate analyses sp anning: the definition and modeling of natural and induced environmen ts; material characterizations; statistical trending analyses, imager y based trajectory analyses; debris transport analyses, and risk asse ssments. The verification and validation of these analyses are bound by conservative assumptions and anchored by testing and flight data. The Liftoff debris risk mitigation is managed through vigilant collab orative work between the Liftoff Debris Team and Launch Pad Operation s personnel and through the management of requirements, interfaces, r isk documentation, configurations, and technical data. Furthermore, o n day of launch, decision analysis is used to apply the wealth of ana lyses to case specific identified risks. This presentation describes how the Liftoff Debris Team applies Systems Engineering in their proce sses to mitigate risk and improve the safety of the Space Shuttle Veh icle.

  2. Firefighter safety for PV systems: Overview of future requirements and protection systems

    DEFF Research Database (Denmark)

    Spataru, Sergiu; Sera, Dezso; Blaabjerg, Frede

    2013-01-01

    for operators during maintenance or fire-fighting. One of the solutions is individual module shutdown by short-circuiting or disconnecting each PV module from the PV string. However, currently no standards have been adopted either for implementing or testing these methods, or doing an evaluation of the module...... shutdown procedures. This paper gives an overview on the most recent fire - and firefighter safety requirements for PV systems, with focus on system and module shutdown systems. Several solutions are presented, analyzed and compared by considering a number of essential characteristics, including...... their transient behavior, components' voltage stress and conduction losses....

  3. Executive overview and introduction to the SMAP information system life-cycle and documentation standards

    Science.gov (United States)

    1989-01-01

    An overview of the five volume set of Information System Life-Cycle and Documentation Standards is provided with information on its use. The overview covers description, objectives, key definitions, structure and application of the standards, and document structure decisions. These standards were created to provide consistent NASA-wide structures for coordinating, controlling, and documenting the engineering of an information system (hardware, software, and operational procedures components) phase by phase.

  4. Reducing Youth Gun Violence: An Overview of Programs and Initiatives. Program Report.

    Science.gov (United States)

    Department of Justice, Washington, DC. Office of Juvenile Justice and Delinquency Prevention.

    This report discusses a wide array of violence prevention strategies used across the United States, ranging from school-based prevention to gun market interception. Relevant research, evaluation, and legislation are included to ground these programs and provide a context for their successful implementation. The first section of the report is an…

  5. Overview of GNSS-R Research Program for Ocean Observations at Japan

    Science.gov (United States)

    Ichikawa, Kaoru; Ebinuma, Takuji; Akiyama, Hiroaki; Kitazawa, Yukihito

    2015-04-01

    GNSS-R is a new remote-sensing method which uses reflected GNSS signals. Since no transmitters are required, it is suitable for small satellites. Constellations of GNSS-R small satellites have abilities on revolutionary progress on 'all-time observable' remote-sensing methods . We have started a research program for GNSS-R applications on oceanographic observations under a contract with MEXT (Ministry of Education Culture, Sports, Science and Technology, JAPAN) as a'Space science research base formation program'. The duration of research program is 3 years (2015-2017). The one of important focuses of this program is creation of a new community to merge space engineering and marine science through establishment on application plans of GNSS-R. Actual GNSS-R data acquisition experiments using multi-copters, ships, and/or towers are planned, together with in-situ sea truth data such as wave spectrum, wind speed profiles and sea surface height. These data are compared to determine the accuracy and resolution of the estimates based on GNSS-R observations. Meanwhile, preparation of a ground station for receiving GNSS-R satellite data will be also established. Whole those data obtained in this project will be distributed for public. This paper introduces the overview of research plan..

  6. ADVANCED TURBINE SYSTEMS PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Sy Ali

    2002-03-01

    The market for power generation equipment is undergoing a tremendous transformation. The traditional electric utility industry is restructuring, promising new opportunities and challenges for all facilities to meet their demands for electric and thermal energy. Now more than ever, facilities have a host of options to choose from, including new distributed generation (DG) technologies that are entering the market as well as existing DG options that are improving in cost and performance. The market is beginning to recognize that some of these users have needs beyond traditional grid-based power. Together, these changes are motivating commercial and industrial facilities to re-evaluate their current mix of energy services. One of the emerging generating options is a new breed of advanced fuel cells. While there are a variety of fuel cell technologies being developed, the solid oxide fuel cells (SOFC) and molten carbonate fuel cells (MCFC) are especially promising, with their electric efficiency expected around 50-60 percent and their ability to generate either hot water or high quality steam. In addition, they both have the attractive characteristics of all fuel cells--relatively small siting footprint, rapid response to changing loads, very low emissions, quiet operation, and an inherently modular design lending itself to capacity expansion at predictable unit cost with reasonably short lead times. The objectives of this project are to:(1) Estimate the market potential for high efficiency fuel cell hybrids in the U.S.;(2) Segment market size by commercial, industrial, and other key markets;(3) Identify and evaluate potential early adopters; and(4) Develop results that will help prioritize and target future R&D investments. The study focuses on high efficiency MCFC- and SOFC-based hybrids and competing systems such as gas turbines, reciprocating engines, fuel cells and traditional grid service. Specific regions in the country have been identified where these

  7. Joint Polar Satellite System (JPSS) Common Ground System (CGS) Overview and Architectural Tenets

    Science.gov (United States)

    Miller, S. W.; Grant, K. D.; Jamilkowski, M. L.

    2013-12-01

    The National Oceanic and Atmospheric Administration (NOAA) and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation civilian weather and environmental satellite system: the Joint Polar Satellite System (JPSS). The Joint Polar Satellite System will replace the afternoon orbit component and ground processing system of the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA. The JPSS satellites will carry a suite of sensors designed to collect meteorological, oceanographic, climatological and geophysical observations of the Earth. The ground processing system for JPSS is known as the JPSS Common Ground System (JPSS CGS). Developed and maintained by Raytheon Intelligence and Information Systems (IIS), the CGS is a multi-mission enterprise system serving NOAA, NASA and their national and international partners. The CGS provides a wide range of support to a number of missions: 1) Command and control and mission management for the Suomi National Polar Partnership (S-NPP) mission today, expanding this support to the JPSS-1 satellite and the Polar Free Flyer mission in 2017 2) Data acquisition via a Polar Receptor Network (PRN) for S-NPP, the Japan Aerospace Exploration Agency's (JAXA) Global Change Observation Mission - Water (GCOM-W1), POES, and the Defense Meteorological Satellite Program (DMSP) and Coriolis/WindSat for the Department of Defense (DoD) 3) Data routing over a global fiber Wide Area Network (WAN) for S-NPP, JPSS-1, Polar Free Flyer, GCOM-W1, POES, DMSP, Coriolis/WindSat, the NASA Space Communications and Navigation (SCaN, which includes several Earth Observing System [EOS] missions), MetOp for the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT), and the National Science Foundation (NSF) 4) Environmental data processing and distribution for S-NPP, GCOM-W1 and JPSS-1 The CGS architecture will receive a technology refresh in 2015 to satisfy several key

  8. NASA High Energy Space Science E/PO at SSU: Program Overview and Lessons Learned

    Science.gov (United States)

    Plait, P.; Cominsky, L.

    2003-12-01

    The NASA Education and Public Outreach (E/PO) Group at Sonoma State University is the lead institution for the E/PO of three high-energy space science missions: Swift, GLAST, and XMM-Newton. We have developed award-winning standards-based formal and informal educational activities (classroom exercises, inquiry-driven games, posters, etc.) for these missions, with many more coming soon. Our primary goal is to teach students about the high-energy end of the electromagnetic spectrum, and the astrophysical objects which emit in that energy range. We will present an overview of our group and our work. This includes our collaborations with other groups, getting mission scientists' input on the projects, and the lessons learned in making effective E/PO products that actually get used by teachers. We will also include a brief overview of the NASA Educator Ambassador program, a new highly-effective effort we have initiated to train top-notch educators from across the country to help us develop, test, and disseminate our products.

  9. Overview of data acquisition and central control system of steady state superconducting Tokamak (SST-1)

    Energy Technology Data Exchange (ETDEWEB)

    Pradhan, S., E-mail: pradhan@ipr.res.in; Mahajan, K.; Gulati, H.K.; Sharma, M.; Kumar, A.; Patel, K.; Masand, H.; Mansuri, I.; Dhongde, J.; Bhandarkar, M.; Chudasama, H.

    2016-11-15

    Highlights: • The paper gives overview on SST-1 data acquisition and central control system and future upgrade plans. • The lossless PXI based data acquisition of SST-1 is capable of acquiring around 130 channels with sampling frequency ranging from 10 KHz to 1 MHz sampling frequency. • Design, architecture and technologies used for central control system (CCS) of SST-1. • Functions performed by CCS. - Abstract: Steady State Superconducting Tokamak (SST-1) has been commissioned successfully and has been carrying out limiter assisted ohmic plasma experiments since the beginning of 2014 achieving a maximum plasma current of 75 kA at a central field of 1.5 T and the plasma duration ∼500 ms. In near future, SST-1 looks forward to carrying out elongated plasma experiments and stretching plasma pulses beyond 1 s. The data acquisition and central control system (CCS) for SST-1 are distributed, modular, hierarchical and scalable in nature The CCS has been indigenously designed, developed, implemented, tested and validated for the operation of SST-1. The CCS has been built using well proven technologies like Redhat Linux, vxWorks RTOS for deterministic control, FPGA based hardware implementation, Ethernet, fiber optics backbone for network, DSP for real-time computation & Reflective memory for high-speed data transfer etc. CCS in SST-1 controls & monitors various heterogeneous SST-1 subsystems dispersed in the same campus. The CCS consists of machine control system, basic plasma control system, GPS time synchronization system, storage area network (SAN) for centralize data storage, SST-1 networking system, real-time networks, SST-1 control room infrastructure and many other supportive systems. Machine Control System (MCS) is a multithreaded event driven system running on Linux based servers, where each thread of the software communicates to a unique subsystem for monitoring and control from SST-1 central control room through network programming. The CCS hardware

  10. Overview of data acquisition and central control system of steady state superconducting Tokamak (SST-1)

    International Nuclear Information System (INIS)

    Pradhan, S.; Mahajan, K.; Gulati, H.K.; Sharma, M.; Kumar, A.; Patel, K.; Masand, H.; Mansuri, I.; Dhongde, J.; Bhandarkar, M.; Chudasama, H.

    2016-01-01

    Highlights: • The paper gives overview on SST-1 data acquisition and central control system and future upgrade plans. • The lossless PXI based data acquisition of SST-1 is capable of acquiring around 130 channels with sampling frequency ranging from 10 KHz to 1 MHz sampling frequency. • Design, architecture and technologies used for central control system (CCS) of SST-1. • Functions performed by CCS. - Abstract: Steady State Superconducting Tokamak (SST-1) has been commissioned successfully and has been carrying out limiter assisted ohmic plasma experiments since the beginning of 2014 achieving a maximum plasma current of 75 kA at a central field of 1.5 T and the plasma duration ∼500 ms. In near future, SST-1 looks forward to carrying out elongated plasma experiments and stretching plasma pulses beyond 1 s. The data acquisition and central control system (CCS) for SST-1 are distributed, modular, hierarchical and scalable in nature The CCS has been indigenously designed, developed, implemented, tested and validated for the operation of SST-1. The CCS has been built using well proven technologies like Redhat Linux, vxWorks RTOS for deterministic control, FPGA based hardware implementation, Ethernet, fiber optics backbone for network, DSP for real-time computation & Reflective memory for high-speed data transfer etc. CCS in SST-1 controls & monitors various heterogeneous SST-1 subsystems dispersed in the same campus. The CCS consists of machine control system, basic plasma control system, GPS time synchronization system, storage area network (SAN) for centralize data storage, SST-1 networking system, real-time networks, SST-1 control room infrastructure and many other supportive systems. Machine Control System (MCS) is a multithreaded event driven system running on Linux based servers, where each thread of the software communicates to a unique subsystem for monitoring and control from SST-1 central control room through network programming. The CCS hardware

  11. About Parallel Programming: Paradigms, Parallel Execution and Collaborative Systems

    Directory of Open Access Journals (Sweden)

    Loredana MOCEAN

    2009-01-01

    Full Text Available In the last years, there were made efforts for delineation of a stabile and unitary frame, where the problems of logical parallel processing must find solutions at least at the level of imperative languages. The results obtained by now are not at the level of the made efforts. This paper wants to be a little contribution at these efforts. We propose an overview in parallel programming, parallel execution and collaborative systems.

  12. Early Childhood Caries and the Impact of Current U.S. Medicaid Program: An Overview

    Directory of Open Access Journals (Sweden)

    Bussma Ahmed Bugis

    2012-01-01

    Full Text Available Pediatric dental caries is the most common chronic disease among children. Above 40% of the U.S. children aged 2–11 years have dental caries; more than 50% of them come from low-income families. Under dental services of the Medicaid program, children enrolled in Medicaid must receive preventive dental services. However, only 1/5 of them utilize preventive dental services. The purpose of this overview is to measure the impact of Medicaid dental benefits on reducing oral health disparities among Medicaid-eligible children. This paper explains the importance of preventive dental care, children at high risk of dental caries, Medicaid dental benefits, utilization of dental preventive services by Medicaid-eligible children, dental utilization influencing factors, and outcome evaluation of Medicaid in preventing dental caries among children. In conclusion, despite the recent increase of children enrolled in Medicaid, utilizing preventive dental care is still a real challenge that faces Medicaid.

  13. Overview of graduate training program of John Adams Institute for Accelerator Science

    Science.gov (United States)

    Seryi, Andrei

    The John Adams Institute for Accelerator Science is a center of excellence in the UK for advanced and novel accelerator technology, providing expertise, research, development and training in accelerator techniques, and promoting advanced accelerator applications in science and society. We work in JAI on design of novel light sources upgrades of 3-rd generation and novel FELs, on plasma acceleration and its application to industrial and medical fields, on novel energy recovery compact linacs and advanced beam diagnostics, and many other projects. The JAI is based on three universities - University of Oxford, Imperial College London and Royal Holloway University of London. Every year 6 to 10 accelerators science experts, trained via research on cutting edge projects, defend their PhD thesis in JAI partner universities. In this presentation we will overview the research and in particular the highly successful graduate training program in JAI.

  14. Eva Physiology, Systems, and Performance (EPSP) Project Overview

    Science.gov (United States)

    Gernhardt, Michael L.

    2007-01-01

    Extravehicular activity (EVA) is any activity performed by astronauts outside their space vehicle or habitat. EVA may be performed on orbit, such as outside the Space Shuttle or the International Space Station, or on a planetary surface such as Mars or on the moon. Astronauts wear a pressurized suit that provides environmental protection, mobility, life support, and communications while they work in the harsh conditions of a microgravity environment. Exploration missions to the moon and Mars may last many days and will include many types of EVAs; exploration, science, construction and maintenance. The effectiveness and success of these EVA-filled missions is dependent on the ability to perform tasks efficiently. The EVA Physiology, Systems and Performance (EPSP) project will conduct a number of studies to understand human performance during EVA, from a molecular level to full-scale equipment and suit design aspects, with the aim of developing safe and efficient systems for Exploration missions and the Constellation Program. The EPSP project will 1) develop Exploration Mission EVA suit requirements for metabolic and thermal loading, optional center of gravity location, biomedical sensors, hydration, nutrition, and human biomedical interactions; 2) develop validated EVA prebreathe protocols that meet medical, vehicle, and habitat constraints while minimizing crew time and thus increasing EVA work efficiency; and 3) define exploration decompression sickness (DCS) risks, policy, and mission success statistics and develop a DCS risk definition report.

  15. S/sup 3/ Financial Projection Model: preliminary user's manual and system overview

    Energy Technology Data Exchange (ETDEWEB)

    Masso, J. F.

    1976-11-30

    The S/sup 3/ Financial Projection Model is an effort undertaken to construct a pipeline economic model in order to satisfy the requirements of the US ERDA program: Energy Study of Pipeline Transportation System. A brief outline of this process is described in Appendix A, Background on the S/sup 3/ Development of a Pipeline Economic Model. A general overview of the model is presented first to indicate the rationale underlying the model and to show the linkages between the various submodels. An understanding of the basic accounting definitions and self-evident relationships between line items in the general financial accounting reports is a prerequisite for the effective application of the model. Particular attention has been paid in this system description to defining the methods of calculations utilized by the model and to describing the optional capital investment planning techniques that may be exercised with the model. The mathematical relationships underlying various planning techniques are defined and the methods for applying these techniques are discussed with illustrations and sample input data specifications. Decision tables are used to show complex decision rules applied within the model to determine the logical flow of a particular computational routine. The complete set of source data and model options are described along with the procedures for input data preparation and actual program operation.

  16. A Business Overview & Summary of the SM-27S/T MACHETE RDT&E Program as Undertaken by the Military Aerospace/Tactical Air Warfare Systems Division of STAVATTI

    Science.gov (United States)

    2005-06-27

    molds rather than cast/plate Invar molds for composites fabri- cation. The first stage in prototype construction is the fabrication of alloy tooling and...Airframe Systems Massachusetts Goodyear Tires Ohio Remmelle Engineering Invar Molds Minnesota Huck International Rivets California Universal Alloy Corp...tural composition. Although traditional Alclad alloys such as 7075, 7050 and 7150 aluminum are used in SM-27 wings, the MACHETE is the only COIN

  17. Embedded systems circuits and programming

    CERN Document Server

    Sanchez, Julio

    2012-01-01

    During the development of an engineered product, developers often need to create an embedded system--a prototype--that demonstrates the operation/function of the device and proves its viability. Offering practical tools for the development and prototyping phases, Embedded Systems Circuits and Programming provides a tutorial on microcontroller programming and the basics of embedded design. The book focuses on several development tools and resources: Standard and off-the-shelf components, such as input/output devices, integrated circuits, motors, and programmable microcontrollers The implementat

  18. Overview of NASA's Universe of Learning: An Integrated Astrophysics STEM Learning and Literacy Program

    Science.gov (United States)

    Smith, Denise; Lestition, Kathleen; Squires, Gordon; Biferno, Anya A.; Cominsky, Lynn; Manning, Colleen; NASA's Universe of Learning Team

    2018-01-01

    NASA's Universe of Learning creates and delivers science-driven, audience-driven resources and experiences designed to engage and immerse learners of all ages and backgrounds in exploring the universe for themselves. The project is the result of a unique partnership between the Space Telescope Science Institute, Caltech/IPAC, Jet Propulsion Laboratory, Smithsonian Astrophysical Observatory, and Sonoma State University, and is one of 27 competitively-selected cooperative agreements within the NASA Science Mission Directorate STEM Activation program. The NASA's Universe of Learning team draws upon cutting-edge science and works closely with Subject Matter Experts (scientists and engineers) from across the NASA Astrophysics Physics of the Cosmos, Cosmic Origins, and Exoplanet Exploration themes. Together we develop and disseminate data tools and participatory experiences, multimedia and immersive experiences, exhibits and community programs, and professional learning experiences that meet the needs of our audiences, with attention to underserved and underrepresented populations. In doing so, scientists and educators from the partner institutions work together as a collaborative, integrated Astrophysics team to support NASA objectives to enable STEM education, increase scientific literacy, advance national education goals, and leverage efforts through partnerships. Robust program evaluation is central to our efforts, and utilizes portfolio analysis, process studies, and studies of reach and impact. This presentation will provide an overview of NASA's Universe of Learning, our direct connection to NASA Astrophysics, and our collaborative work with the NASA Astrophysics science community.

  19. Foreign Aid: An Introductory Overview of U.S. Programs and Policy

    Science.gov (United States)

    2005-01-19

    assistance supported six inter-related goals: achievement of broad-based, economic growth; development of democratic systems ; stabilization of world...low-income housing and community development programs of developing countries and microenterprise and small business credit programs. A Development ...reporting burden for the collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching

  20. Extensions to the energy system GMM model: An overview

    Energy Technology Data Exchange (ETDEWEB)

    Barreto, L.; Kypreos, S

    2006-09-15

    This report describes recent extensions to the energy-systems GMM (Global Multiregional MARKAL) model undertaken by the Energy Economics Group (EEG) of the Paul Scherrer Institute (PSI) in Switzerland (hereon referred to as PSI-EEG) in the context of the SAPIENTIA project sponsored by the European Commission (DG Research) and the Swiss National Centre for Competence in Research on Climate (NCCR-Climate). GMM is a multi-regional 'bottom-up' energy-systems optimization model that endogenizes technology learning. The model has been developed and is used at PSI-EEG. The main extensions undertaken here concern the incorporation of a clusters approach to technology learning, the introduction of an improved representation of the transportation sector with emphasis on the passenger sub-sector and the implementation of marginal abatement curves for CH{sub 4} and N{sub 2}O, two main non-CO{sub 2} greenhouse gases. Also, a linear representation of the atmospheric concentration of CO{sub 2}, CH{sub 4} and N{sub 2}O has been included. Other changes are related to the inclusion of additional technologies for production of synthetic fuels (hydrogen and Fischer- Tropsch liquids) and the inclusion of CO{sub 2} capture in fossil-based and biomass-based hydrogen production. Several of the developments described here follow the work of Turton and Barreto (2004, 2006) for the ERIS model at the Environmentally Compatible Energy Strategies (ECS) Program of IIASA. The remainder of this report is organized as follows. Section 2 describes the basic structure of the GMM model, the main assumptions for the scenario developed and the basic approach to endogenize technology learning in the model and examine the effects of R+D and D+D programs. Section 3 discusses the implementation of technology clusters and describes the key components chosen here. Section 4 presents the improvements to the transportation sector with emphasis on the passenger car subsector. Section 5 briefly

  1. Extensions to the energy system GMM model: An overview

    International Nuclear Information System (INIS)

    Barreto, L.; Kypreos, S.

    2006-09-01

    This report describes recent extensions to the energy-systems GMM (Global Multiregional MARKAL) model undertaken by the Energy Economics Group (EEG) of the Paul Scherrer Institute (PSI) in Switzerland (hereon referred to as PSI-EEG) in the context of the SAPIENTIA project sponsored by the European Commission (DG Research) and the Swiss National Centre for Competence in Research on Climate (NCCR-Climate). GMM is a multi-regional 'bottom-up' energy-systems optimization model that endogenizes technology learning. The model has been developed and is used at PSI-EEG. The main extensions undertaken here concern the incorporation of a clusters approach to technology learning, the introduction of an improved representation of the transportation sector with emphasis on the passenger sub-sector and the implementation of marginal abatement curves for CH 4 and N 2 O, two main non-CO 2 greenhouse gases. Also, a linear representation of the atmospheric concentration of CO 2 , CH 4 and N 2 O has been included. Other changes are related to the inclusion of additional technologies for production of synthetic fuels (hydrogen and Fischer- Tropsch liquids) and the inclusion of CO 2 capture in fossil-based and biomass-based hydrogen production. Several of the developments described here follow the work of Turton and Barreto (2004, 2006) for the ERIS model at the Environmentally Compatible Energy Strategies (ECS) Program of IIASA. The remainder of this report is organized as follows. Section 2 describes the basic structure of the GMM model, the main assumptions for the scenario developed and the basic approach to endogenize technology learning in the model and examine the effects of R+D and D+D programs. Section 3 discusses the implementation of technology clusters and describes the key components chosen here. Section 4 presents the improvements to the transportation sector with emphasis on the passenger car subsector. Section 5 briefly describes the new technologies for synthetic fuel

  2. Advanced Transport Operating Systems Program

    Science.gov (United States)

    White, John J.

    1990-01-01

    NASA-Langley's Advanced Transport Operating Systems Program employs a heavily instrumented, B 737-100 as its Transport Systems Research Vehicle (TRSV). The TRSV has been used during the demonstration trials of the Time Reference Scanning Beam Microwave Landing System (TRSB MLS), the '4D flight-management' concept, ATC data links, and airborne windshear sensors. The credibility obtainable from successful flight test experiments is often a critical factor in the granting of substantial commitments for commercial implementation by the FAA and industry. In the case of the TRSB MLS, flight test demonstrations were decisive to its selection as the standard landing system by the ICAO.

  3. Pilot chargeback system program plan

    International Nuclear Information System (INIS)

    Smith, P.

    1997-03-01

    This planning document outlines the steps necessary to develop, test, evaluate, and potentially implement a pilot chargeback system at the Idaho National Engineering and Environmental Laboratory for the treatment, storage, and disposal of current waste. This pilot program will demonstrate one system that can be used to charge onsite generators for the treatment and disposal of low-level radioactive waste. In FY 1997, mock billings will begin by July 15, 1997. Assuming approvals are received to do so, FY 1998 activities will include modifying the associated automated systems, testing and evaluating system performance, and estimating the amount generators will spend for waste storage, treatment, and disposal in FY 1999. If the program is fully implemented in FY 1999, generators will pay actual, automated bills for waste management services from funds transferred to their budgets from Environmental Management

  4. Nuclear insurance overview: suggestions for improving the system

    International Nuclear Information System (INIS)

    Boylan, F.X.

    1977-01-01

    Federal District Court Judge James B. McMillan has declared that the Price-Anderson limitation of liability is unconstitutional. The author lays out his personal observations on the subject. He then advances ideas that reflect his personal views regarding what he considers to be the real role of Price-Anderson and NELIA-MAELU for the future (assuming a way is found to overcome the problems associated with Judge McMillan's decision). Price-Anderson is the government indemnity available, and the private insurance companies are Nuclear Energy Liability Insurance Association and Mutual Atomic Energy Liability Underwriters. The author, a former general manager of NELIA, while avoiding a detailed discussion of the new industry retrospective plan, the Hathaway Amendment (the likelihood of a serious nuclear accident) and Judge McMillan's decision, compiled a list of 12 recommendations. His aim is to stimulate new thinking regarding ways to convert a system originally conceived in 1956 into a streamlined program for the 1980s

  5. NRC review of passive reactor design certification testing programs: Overview, progress, and regulatory perspective

    Energy Technology Data Exchange (ETDEWEB)

    Levin, A.E.

    1995-09-01

    New reactor designs, employing passive safety systems, are currently under development by reactor vendors for certification under the U.S. Nuclear Regulatory Commission`s (NRC`s) design certification rule. The vendors have established testing programs to support the certification of the passive designs, to meet regulatory requirements for demonstration of passive safety system performance. The NRC has, therefore, developed a process for the review of the vendors` testing programs and for incorporation of the results of those reviews into the safety evaluations for the passive plants. This paper discusses progress in the test program reviews, and also addresses unique regulatory aspects of those reviews.

  6. The Geographic Climate Information System Project (GEOCLIMA): Overview and preliminary results

    Science.gov (United States)

    Feidas, H.; Zanis, P.; Melas, D.; Vaitis, M.; Anadranistakis, E.; Symeonidis, P.; Pantelopoulos, S.

    2012-04-01

    The project GEOCLIMA aims at developing an integrated Geographic Information System (GIS) allowing the user to manage, analyze and visualize the information which is directly or indirectly related to climate and its future projections in Greece. The main components of the project are: a) collection and homogenization of climate and environmental related information, b) estimation of future climate change based on existing regional climate model (RCM) simulations as well as a supplementary high resolution (10 km x 10 km) simulation over the period 1961-2100 using RegCM3, c) compilation of an integrated uniform geographic database, and d) mapping of climate data, creation of digital thematic maps, and development of the integrated web GIS application. This paper provides an overview of the ongoing research efforts and preliminary results of the project. First, the trends in the annual and seasonal time series of precipitation and air temperature observations for all available stations in Greece are assessed. Then the set-up of the high resolution RCM simulation (10 km x 10 km) is discussed with respect to the selected convective scheme. Finally, the relationship of climatic variables with geophysical features over Greece such as altitude, location, distance from the sea, slope, aspect, distance from climatic barriers, land cover etc) is investigated, to support climate mapping. The research has been co-financed by the European Union (European Regional Development Fund) and Greek national funds through the Operational Program "Competitiveness and Entrepreneurship" of the National Strategic Reference Framework (NSRF) - Research Funding Program COOPERATION 2009.

  7. Eurobot Ground Prototype Control System Overview & Tests Results

    Science.gov (United States)

    Merlo, Andrea; Martelli, Andrea; Pensavalle, Emanuele; Ferraris, Simona; Didot, Frederic

    2010-08-01

    In the planned missions on Moon and Mars, robotics can play a key role, as robots can both assist astronauts and, above all, relieve them of dangerous or too difficult tasks. To this aim, both cooperative capabilities and a great level of autonomy are needed: the robotic crew assistant must be able to work on its own, without supervision by humans, and to help astronauts to accomplish tasks otherwise unfeasible for them. Within this context, a project named Eurobot Ground Prototype, conducted in conjunction with ESA and Thales Alenia Space, is presented. EGP is a dual-arm mobile manipulator and exploits both stereo cameras and force/torque sensors in order to rely on visual and force feedback. This paper provides an overview of the performed and on going activities within the Eurobot Ground Prototype project.

  8. A quick overview of artificial intelligence and expert systems

    International Nuclear Information System (INIS)

    Engelmore, R.S.

    1989-01-01

    Artificial intelligence (AI) is almost a household word these days. There have been several conferences held in this country over the last two years on artificial intelligence and its applications. The international AI conference at Snowbird, Utah, in 1987 centered on AI applications in the nuclear industry. This paper serves as an introductory overview of the subject of AI for this state-of-the-art review of AI applications in the nuclear industry. We introduce the subject in a way that will be relevant to many people in the nuclear industry who have heard of AI but are not familiar with it and are looking for answers to several simple questions. We attempt to answer those simple questions here and prepare the reader so that he or she can appreciate the following sections on AI applications in the nuclear field. (orig./GL)

  9. Overview of tritium systems for the Compact Ignition Tokamak

    International Nuclear Information System (INIS)

    Bartlit, J.R.; Gruetzmacher, K.M.; Fleming, R.B.

    1987-01-01

    The Compact Ignition Tokamak (CIT) is being designed at several laboratories to produce and study fully ignited plasma discharges. The tritium systems which will be needed for CIT include fueling systems and radiation monitoring and safety systems. Design of the tritium systems is the responsibility of the Tritium Systems Test Assembly (TSTA) at Los Alamos National Laboratory. Major new tritium systems for CIT include a pellet injector, an air detritiation system and a glovebox atmosphere detritiation system. The pellet injector is being developed at Oak Ridge National Laboratory. 7 refs., 2 figs

  10. Overview of Design, Lifecycle, and Safety for Computer-Based Systems

    Science.gov (United States)

    Torres-Pomales, Wilfredo

    2015-01-01

    This document describes the need and justification for the development of a design guide for safety-relevant computer-based systems. This document also makes a contribution toward the design guide by presenting an overview of computer-based systems design, lifecycle, and safety.

  11. The central noradrenergic system: an overview | Viljoen | African ...

    African Journals Online (AJOL)

    The central noradrenergic system belongs to a group of brainstem neuromodulatory systems previously referred to as the ascending reticular activating system. In this article a heuristic model is presented of the central noradrenergic system depicting the major projections to other cerebral areas, its interactions with other ...

  12. Challenges in the analysis of complex systems: introduction and overview

    Science.gov (United States)

    Hastings, Harold M.; Davidsen, Jörn; Leung, Henry

    2017-12-01

    One of the main challenges of modern physics is to provide a systematic understanding of systems far from equilibrium exhibiting emergent behavior. Prominent examples of such complex systems include, but are not limited to the cardiac electrical system, the brain, the power grid, social systems, material failure and earthquakes, and the climate system. Due to the technological advances over the last decade, the amount of observations and data available to characterize complex systems and their dynamics, as well as the capability to process that data, has increased substantially. The present issue discusses a cross section of the current research on complex systems, with a focus on novel experimental and data-driven approaches to complex systems that provide the necessary platform to model the behavior of such systems.

  13. The systems engineering overview and process (from the Systems Engineering Management Guide, 1990)

    Science.gov (United States)

    1993-01-01

    The past several decades have seen the rise of large, highly interactive systems that are on the forward edge of technology. As a result of this growth and the increased usage of digital systems (computers and software), the concept of systems engineering has gained increasing attention. Some of this attention is no doubt due to large program failures which possibly could have been avoided, or at least mitigated, through the use of systems engineering principles. The complexity of modern day weapon systems requires conscious application of systems engineering concepts to ensure producible, operable and supportable systems that satisfy mission requirements. Although many authors have traced the roots of systems engineering to earlier dates, the initial formalization of the systems engineering process for military development began to surface in the mid-1950s on the ballistic missile programs. These early ballistic missile development programs marked the emergence of engineering discipline 'specialists' which has since continued to grow. Each of these specialties not only has a need to take data from the overall development process, but also to supply data, in the form of requirements and analysis results, to the process. A number of technical instructions, military standards and specifications, and manuals were developed as a result of these development programs. In particular, MILSTD-499 was issued in 1969 to assist both government and contractor personnel in defining the systems engineering effort in support of defense acquisition programs. This standard was updated to MIL-STD499A in 1974, and formed the foundation for current application of systems engineering principles to military development programs.

  14. University Program Management Information System

    Science.gov (United States)

    Gans, Gary (Technical Monitor)

    2004-01-01

    As basic policy, NASA believes that colleges and universities should be encouraged to participate in the nation's space and aeronautics program to the maximum extent practicable. Indeed, universities are considered as partners with government and industry in the nation's aerospace program. NASA's objective is to have them bring their scientific, engineering, and social research competence to bear on aerospace problems and on the broader social, economic, and international implications of NASA's technical and scientific programs. It is expected that, in so doing, universities will strengthen both their research and their educational capabilities to contribute more effectively to the national well being. This annual report is one means of documenting the NASA-university relationship, frequently denoted, collectively, as NASA's University Program. This report is consistent with agency accounting records, as the data is obtained from NASA's Financial and Contractual Status (FACS) System, operated by the Financial Management Division and the Procurement Office. However, in accordance with interagency agreements, the orientation differs from that required for financial or procurement purposes. Any apparent discrepancies between this report and other NASA procurement or financial reports stem from the selection criteria for the data.

  15. An Overview of the Asynchronous Digital Systems – Part 3

    Directory of Open Access Journals (Sweden)

    Mihai Timis

    2008-01-01

    Full Text Available Implementation methods for the digital asynchronous systems use different predefined models like self timed circuits, speed independent circuits, delay insensitive circuits, handshake protocol implementation in asynchronous systems,C Muller circuits.

  16. An Overview of the Asynchronous Digital Systems – Part 2

    Directory of Open Access Journals (Sweden)

    Mihai Timis

    2008-01-01

    Full Text Available Implementation methods for the digital asynchronous systems use different predefined models like self timed circuits, speed independent circuits, delay insensitive circuits, handshake protocol implementation in asynchronous systems,C Muller circuits.

  17. Battery Energy Storage Technology for power systems-An overview

    DEFF Research Database (Denmark)

    Chandrashekhara, Divya K; Østergaard, Jacob

    2009-01-01

    the present status of battery energy storage technology and methods of assessing their economic viability and impact on power system operation. Further, a discussion on the role of battery storage systems of electric hybrid vehicles in power system storage technologies had been made. Finally, the paper...... suggests a likely future outlook for the battery technologies and the electric hybrid vehicles in the context of power system applications....

  18. Overview of Single-Phase Grid-Connected Photovoltaic Systems

    DEFF Research Database (Denmark)

    Yang, Yongheng; Blaabjerg, Frede

    2015-01-01

    A still booming installation of solar photovoltaic (PV) systems has been witnessed worldwide. It is mainly driven by the demand of “clean” power generation. Grid-connected PV systems will become an even active player in the future mixed power systems, which are linked by a vast of power electronics...

  19. Overview of Single-Phase Grid-Connected Photovoltaic Systems

    DEFF Research Database (Denmark)

    Yang, Yongheng; Blaabjerg, Frede

    2017-01-01

    A continuous booming installation of solar photovoltaic (PV) systems has been witnessed worldwide. It is mainly driven by the imperative demand of “clean” power generation from renewables. Grid-connected PV systems will thus become an even more active player in the future mixed power systems, which...

  20. Overview of the low energy accelerator scanning system

    International Nuclear Information System (INIS)

    Leo Kwee Wah; Lojius Lombigit; Muhamad Zahidee Taat; Abu Bakar Ghazali; Mohd Rizal Ibrahim; Mohd Rizal Chulan Md Chulan; Azaman Ahmad; Abdul Halim Baijan; Rokiah Mohd Sabri

    2009-01-01

    This paper describes the specification of the low energy accelerator (Baby-EBM; Electron Beam Machine) scanning system. It comprises a discussion of coil inductance measurement, power supply design and the test results. The scanning horn system was completely assembled and tested; it was found that the system is able to scan the beam across the scanning window with a required beam profile. (Author)

  1. A computer-controlled conformal radiotherapy system I: overview

    International Nuclear Information System (INIS)

    Fraass, Benedick A.; McShan, Daniel L.; Kessler, Marc L.; Matrone, Gwynne M.; Lewis, James D.; Weaver, Tamar A.

    1995-01-01

    Purpose: Equipment developed for use with computer-controlled conformal radiotherapy (CCRT) treatment techniques, including multileaf collimators and/or computer-control systems for treatment machines, are now available. The purpose of this work is to develop a system that will allow the safe, efficient, and accurate delivery of CCRT treatments as routine clinical treatments, and permit modifications of the system so that the delivery process can be optimized. Methods and Materials: The needs and requirements for a system that can fully support modern computer-controlled treatment machines equipped with multileaf collimators and segmental or dynamic conformal therapy capabilities have been analyzed and evaluated. This analysis has been used to design and then implement a complete approach to the delivery of CCRT treatments. Results: The computer-controlled conformal radiotherapy system (CCRS) described here consists of a process for the delivery of CCRT treatments, and a complex software system that implements the treatment process. The CCRS system described here includes systems for plan transfer, treatment delivery planning, sequencing of the actual treatment delivery process, graphical simulation and verification tools, as well as an electronic chart that is an integral part of the system. The CCRS system has been implemented for use with a number of different treatment machines. The system has been used clinically for more than 2 years to perform CCRT treatments for more than 200 patients. Conclusions: A comprehensive system for the implementation and delivery of computer-controlled conformal radiation therapy (CCRT) plans has been designed and implemented for routine clinical use with multisegment, computer-controlled, multileaf-collimated conformal therapy. The CCRS system has been successfully implemented to perform these complex treatments, and is considered quite important to the clinical use of modern computer-controlled treatment techniques

  2. Overview of CEV Thermal Protection System Seal Development

    Science.gov (United States)

    DeMange, Jeff; Taylor, Shawn; Dunlap, Patrick; Steinetz, Bruce; Delgado, Irebert; Finkbeiner, Josh; Mayer, John

    2009-01-01

    NASA GRC supporting design, development, and implementation of numerous seal systems for the Orion CEV: a) HS-to-BS interface. b) Compression pad. HS-to-BS Interface Seal System: a) design has evolved as a result of changes with the CEV TPS. b) Seal system is currently under development/evaluation. Coupon level tests, Arc jet tests, and Validation test development. Compression Pad: a) Finalizing design options. b) Evaluating material candidates.

  3. Overview of the Diagnostics Systems of SOLEIL and DIAMOND

    CERN Document Server

    Denard, J C

    2003-01-01

    SOLEIL and DIAMOND are two third-generation light sources in construction in France and in Great Britain respectively. SOLEIL is scheduled to deliver its first photons to its users in 2006 and DIAMOND in 2007. This talk will present the beam diagnostic systems of both projects with emphasizing technological novelties and the instruments that are essential to their performances: BPM system, profile monitors and feedback systems.

  4. Overview of HTGR utilization system developments at JAERI

    International Nuclear Information System (INIS)

    Miyamoto, Y.; Shiozawa, S.; Inagaki, Y.

    1997-01-01

    JAERI has been constructing a 30-MWt HTGR, named HTTR, to develop technology and to demonstrate effectiveness of high-temperature nuclear heat utilization. A hydrogen production system by natural gas steam reforming is to be the first heat utilization system of the HTTR since its technology matured in fossil-fired plant enables to couple with HTTR in the early 2000's and technical solutions demonstrated by the coupling will contribute to all other hydrogen production systems. The HTTR steam reforming system is designed to utilize the nuclear heat effectively and to achieve hydrogen productivity competitive to that of a fossil-fired plant with operability, controllability and safety acceptable enough to commercialization, and an arrangement of key components was already decided. Prior to coupling of the steam reforming system with the HTTR, an out-of-pile test is planned to confirm safety, controllability and performance of the steam reforming system under simulated operational conditions. The out-of-pile system is an approximately 1/20-1/30 scale system of the HTTR steam reforming system and simulates key components downstream from an IHX

  5. An Overview of National Trends Related to Innovative Ventilation Systems

    DEFF Research Database (Denmark)

    Heijmans, Nicolas; Wouters, Peter; Heiselberg, Per

    2008-01-01

    This paper summarises the discussion related to innovative (ventilation) systems that took place at the AIVC workshop organised in Ghent, Belgium, in March 2008.......This paper summarises the discussion related to innovative (ventilation) systems that took place at the AIVC workshop organised in Ghent, Belgium, in March 2008....

  6. ATLAS TDAQ System Administration: an overview and evolution

    CERN Document Server

    LEE, CJ; The ATLAS collaboration; BOGDANCHIKOV, A; BRASOLIN, F; CONTESCU, AC; DARLEA, GL; KOROL, A; SCANNICCHIO, DA; TWOMEY, M; VALSAN, ML

    2013-01-01

    The ATLAS Trigger and Data Acquisition (TDAQ) system is responsible for the online processing of live data streaming from the ATLAS experiment at the Large Hadron Collider (LHC) at CERN. The system processes the direct data readout from ~100 million channels on the detector through three trigger levels, selecting interesting events for analysis with a factor of 10^7 reduction on the data rate with a latency of less than a few seconds. Most of the functionality is implemented on ~3000 servers composing the online farm. Due to the critical functionality of the system a sophisticated computing environment is maintained, covering the online farm and ATLAS control rooms, as well as a number of development and testing labs. The specificity of the system required the development of dedicated applications (e.g. ConfDB, BWM) for system configuration and maintenance; in parallel other Open Source tools (Puppet and Quattor) are used to centrally configure the operating systems. The health monitoring of the TDAQ system h...

  7. An overview of the NASA electronic components information management system

    Science.gov (United States)

    Kramer, G.; Waterbury, S.

    1991-01-01

    The NASA Parts Project Office (NPPO) comprehensive data system to support all NASA Electric, Electronic, and Electromechanical (EEE) parts management and technical data requirements is described. A phase delivery approach is adopted, comprising four principal phases. Phases 1 and 2 support Space Station Freedom (SSF) and use a centralized architecture with all data and processing kept on a mainframe computer. Phases 3 and 4 support all NASA centers and projects and implement a distributed system architecture, in which data and processing are shared among networked database servers. The Phase 1 system, which became operational in February of 1990, implements a core set of functions. Phase 2, scheduled for release in 1991, adds functions to the Phase 1 system. Phase 3, to be prototyped beginning in 1991 and delivered in 1992, introduces a distributed system, separate from the Phase 1 and 2 system, with a refined semantic data model. Phase 4 extends the data model and functionality of the Phase 3 system to provide support for the NASA design community, including integration with Computer Aided Design (CAD) environments. Phase 4 is scheduled for prototyping in 1992 to 93 and delivery in 1994.

  8. Distributed Generation in Power Systems: An Overview and Key Issues

    DEFF Research Database (Denmark)

    Singh, Sri Niwas

    2009-01-01

    quality, etc. However, depending on the system configuration and management, these advantages may not be true. Moreover, due to structural and managerial changes in the electricity supply industry motivated with introduction of completion, the role of small generations distributed in the low....../medium voltage network has gained importance. This paper adopts a systematic approach by focusing on the most important research areas related to the distributed generations. Various DG technologies are described and penetration of DGs in the Indian system has been discussed. This paper also highlights the key...... issues in the DG integration in power systems...

  9. Small collision systems: Theory overview on cold nuclear matter effects

    Directory of Open Access Journals (Sweden)

    Armesto Néstor

    2018-01-01

    Full Text Available Many observables measured at the Relativistic Heavy Ion Collider and the Large Hadron Collider show a smooth transition between proton-proton and protonnucleus collisions (small systems, and nucleus-nucleus collisions (large systems, when represented versus some variable like the multiplicity in the event. In this contribution I review some of the physics mechanisms, named cold nuclear matter effects, that may lead to a collective-like behaviour in small systems beyond the macroscopic description provided by relativistic hydrodynamics. I focus on the nuclear modification of parton densities, single inclusive particle production and correlations.

  10. Small collision systems: Theory overview on cold nuclear matter effects

    Science.gov (United States)

    Armesto, Néstor

    2018-02-01

    Many observables measured at the Relativistic Heavy Ion Collider and the Large Hadron Collider show a smooth transition between proton-proton and protonnucleus collisions (small systems), and nucleus-nucleus collisions (large systems), when represented versus some variable like the multiplicity in the event. In this contribution I review some of the physics mechanisms, named cold nuclear matter effects, that may lead to a collective-like behaviour in small systems beyond the macroscopic description provided by relativistic hydrodynamics. I focus on the nuclear modification of parton densities, single inclusive particle production and correlations.

  11. A freshman orientation program to provide an overview of the medical learning roadmap.

    Science.gov (United States)

    Fujikura, Terumichi; Nemoto, Takehiro; Takayanagi, Kazue; Kashimura, Masami; Hayasaka, Yoshiaki; Shimizu, Kazuo

    2014-01-01

    International accreditation of medical education was introduced in Japan in 2013 and is planning to be applied in late 2014 or 2015. Students will need to cope with the resulting changes and to recognize by what route they will learn medicine. Therefore, a freshman orientation course, which was based on problem-based learning (PBL) and had been held for first-year students, was modified as an awareness reform program in which students would learn "how to learn medicine." We investigated whether this program has led to useful changes in students' recognition of the way of learning in medical school and their directions as learners. The program was held for 114 first-year medical school students in 2013 and consisted of PBL tutorials, large-classroom lectures, simulation learning using role-play with simulated patients, and team-based learning (TBL), presented in this order. Learning modules that is made with an integration of the clinical sciences with the basic biomedical and the behavioral and social sciences were provided. A nonanonymous questionnaire survey asking" what learning methods are effective for you?" was conducted before and after completion of the course. Furthermore, group answers obtained in TBL were investigated. The score for the question" To what extent can you imagine your route of learning during your 6 years?" significantly increased from 3.1±0.99 (mean±SD) before the course to 3.5±0.88 (plearning, such as PBL, useful for you?" significantly increased from 3.9±0.73 to 4.2±0.71 (plearning interview skills. We believe students should acquire active learning attitudes as adults early in their 6 years of medical school. The level of understanding of" how to learn as adults" was 3.7 and indicated a moderate result. This course employed many educational strategies, and we believe it helped students understand what they learn and how to learn during their 6 years of medical and to get an overview of the learning roadmap.

  12. Local Area Network Material Accounting System (LANMAS) Functions and Features Overview

    International Nuclear Information System (INIS)

    Robichaux, J.J.

    1998-07-01

    The Local Area Network Material Accounting System (LANMAS) application is a standardized approach to comply with the DOE Order 5633.3B, control and Accountability of Nuclear Material, material accounting requirements. This paper provides a general overview of the functions and features included in the LANMAS application

  13. Evaluation of the dual digestion system 1: overview of the Milnerton experience

    CSIR Research Space (South Africa)

    Messenger, JR

    1993-07-01

    Full Text Available A number of advantages are claimed for dual digestion as a system for sewage sludge pasteurisation and stabilisation. In this paper, the first of a series of 4, an overview of a 4-year full-scale (45 m3 aerobic reactor and 500 m3 anaerobic digester...

  14. STUDYING FOREST ROOT SYSTEMS - AN OVERVIEW OF METHODOLOGICAL PROBLEMS

    Science.gov (United States)

    The study of tree root systems is central to understanding forest ecosystem carbon and nutrient cycles, nutrient and water uptake, C allocation patterns by trees, soil microbial populations, adaptation of trees to stress, soil organic matter production, etc. Methodological probl...

  15. An Overview of the Amoeba Distributed Operating System

    NARCIS (Netherlands)

    Tanenbaum, Andrew S.; Mullender, Sape J.

    As hardware prices continue to drop rapidly, building large computer systems by interconnecting substantial numbers of microcomputers becomes increasingly attractive. Many techniques for interconnecting the hardware, such as Ethernet [Metcalfe and Boggs, 1976], ring nets [Farber and Larson, 1972],

  16. An overview of adsorptive processes in refrigeration systems

    Directory of Open Access Journals (Sweden)

    Wolak Eliza

    2016-01-01

    Full Text Available Economic reasons and quest for new solutions based on recovering the energy have provoked an increase of interest in the adsorption technology in the refrigeration industry. The confirmation can be the fact that number of published research is on rise. Adsorption appliances may turn out to be an alternative to compression-type coolers. They use ecological chemical agents instead of substances which are aggressive and harmful to the environment. For regeneration of adsorptive refrigeration systems one can use cheap energy in a form of: industrial waste heat, energy of solar radiation and cheap electric power. The paper presents principles of operation as well as advantages and disadvantages of adsorptive refrigeration systems. Basing on literature the most frequently used adsorbent – adsorbate systems – which are employed in refrigeration industry – have been characterized. A review of construction solutions of systems on both laboratory and industrial scale has been made.

  17. Overview and status of RF systems for the SSC Linac

    International Nuclear Information System (INIS)

    Mynk, J.; Grippe, J.; Cutler, R.I.; Rodriguez, R.

    1993-05-01

    The Superconducting Super Collider (SSC) Linear Accelerator (Linac) produces a 600-MeV, 35-μs, H-beam at a 10-Hz repetition rate. The beam is accelerated by a series of RF cavities. These consist of a Radio Frequency Quadrupole (RFQ), two bunchers, and four Drift Tube Linac (DTL) tanks at 427.617 MHz, and two bunchers, nine side-coupled Linac modules, and an energy compressor at 1282.851 MHz. The RFQ amplifier and the low-frequency buncher cavity amplifiers use gridded tubes, while the other cavities use klystron amplifier systems. The RF control system consists of a reference line and cavity feedback and feedforward loops for each amplifier. The RF amplifier system for each of these accelerator cavities is described, and the current status of each system is presented

  18. An overview of the Opus language and runtime system

    Science.gov (United States)

    Mehrotra, Piyush; Haines, Matthew

    1994-01-01

    We have recently introduced a new language, called Opus, which provides a set of Fortran language extensions that allow for integrated support of task and data parallelism. lt also provides shared data abstractions (SDA's) as a method for communication and synchronization among these tasks. In this paper, we first provide a brief description of the language features and then focus on both the language-dependent and language-independent parts of the runtime system that support the language. The language-independent portion of the runtime system supports lightweight threads across multiple address spaces, and is built upon existing lightweight thread and communication systems. The language-dependent portion of the runtime system supports conditional invocation of SDA methods and distributed SDA argument handling.

  19. The role of leptin in the respiratory system: an overview

    OpenAIRE

    Malli, Foteini; Papaioannou, Andriana I; Gourgoulianis, Konstantinos I; Daniil, Zoe

    2010-01-01

    Abstract Since its cloning in 1994, leptin has emerged in the literature as a pleiotropic hormone whose actions extend from immune system homeostasis to reproduction and angiogenesis. Recent investigations have identified the lung as a leptin responsive and producing organ, while extensive research has been published concerning the role of leptin in the respiratory system. Animal studies have provided evidence indicating that leptin is a stimulant of ventilation, whereas researchers have prop...

  20. Overview of NASA's Environmental Control and Life Support Systems

    Science.gov (United States)

    Roman, Monserrate

    2009-01-01

    This viewgraph presentation reviews NASA's Environmental Control and Life Support Systems (ECLSS) on the International Space Station. A look inside of the International Space Station detailing ECLSS processes of controlling atmospheric pressure, conditioning the atmosphere, responding to emergency conditions, controlling internal carbon dioxide and contaminants and providing water are described. A detailed description of ISS Regenerative Environmental Control and Life Support System is also presented.

  1. Overview of Intelligent Power System for Future Aircraft (Preprint)

    Science.gov (United States)

    2016-09-01

    higher performance. Some of these challenges include early detection of faults to guarantee safety and reliability, maintaining stability during...operation of pulsed and dynamic negative impedance loads, and optimization of electric machines and energy storage to maximize efficiency and power density...Systems Team • Multi -university effort: – AFRL – RQ Aerospace Systems Directorate – University of Dayton Research Institute – PCKA – Purdue University

  2. ATLAS TDAQ System Administration: an overview and evolution

    CERN Document Server

    LEE, CJ; The ATLAS collaboration; BOGDANCHIKOV, A; BRASOLIN, F; CONTESCU, AC; DARLEA, G-L; KOROL, A; SCANNICCHIO, DA; TWOMEY, M; VALSAN, ML

    2013-01-01

    The ATLAS Trigger and Data Acquisition (TDAQ) system is responsible for the online processing of live data streaming from the ATLAS experiment at the Large Hadron Collider (LHC) at CERN. The system processes the direct data readout from ~100 million channels on the detector through multiple trigger levels, selecting interesting events for analysis with a factor of $10^{7}$ reduction on the data rate with a latency of less than a few seconds. Most of the functionality is implemented on ~3000 servers composing the online farm. Due to the critical functionality of the system a sophisticated computing environment is maintained, covering the online farm and ATLAS control rooms, as well as a number of development and testing labs. The specificity of the system required the development of dedicated applications (e.g. ConfDB, BWM) for system configuration and maintenance; in parallel other Open Source tools (Puppet and Quattor) are used to centrally configure the operating systems. The health monitoring of the TDAQ s...

  3. HYSOLAR an overview on the German-Saudi Arabian program on solar hydrogen

    International Nuclear Information System (INIS)

    Steeb, H.; Seeger, W.

    1993-01-01

    The first phase of HYSOLAR, which ended in 1991, was focusing mainly on investigation, test and improvement of hydrogen production technologies. This paper shortly reviews the most important results: a 2 kW test and research facility in Jeddah; fundamental research in the fields of photo-electrochemistry, advanced alkaline electrolysis and alkaline fuel cells; system studies and decentralized hydrogen utilization; program for education. An outlook into the second phase program, where more emphasis is laid on hydrogen utilization technologies, is also included. 1 tab., 93 refs

  4. Experimentation in family planning delivery systems: an overview.

    Science.gov (United States)

    Cuca, R; Pierce, C S

    1977-12-01

    Experiments in the delivery of family planning services are an important means of testing new approaches on a relatively small scale. Over the past 20 years, extensive experimental efforts have explored such key aspects of service delivery as personnel, the use of mass media, integration of family planning with other services, intensive efforts and camps, incentive payments to acceptors, and inudation or community-based distribution. Approaches that proved successful have often been incorporated into regular programs. An examination of the methodology and findings of family planning experiments, based on a survey of 96 projects testing various approaches, highlights successes, failures, and continuing problems. The discussion of past experience halps point to criteria that might be followed in formulating future experimental projects.

  5. An overview of the Atlas pulsed-power systems

    CERN Document Server

    Parsons, W M; Barr, G W; Bowman, D W; Cochrane, J C; Davis, H A; Elizondo, J M; Gribble, R F; Griego, J R; Hicks, R D; Hinckley, W B; Hosack, K W; Miller, R B; Nielsen, K E; Parker, J V; Ricketts, R L; Salazar, H R; Sánchez, P G; Scudder, D W; Thompson, M C; Trainor, R J; Valdez, G A; Vigil, B N; Waganaar, W J; Watt, R G; Wysocki, F J; Kirbie, H C

    1999-01-01

    Atlas is a facility designed and being constructed at Los Alamos National Laboratory (LANL) to perform high energy-density experiments in support of weapon-physics and basic-research programs. It is designed to be an international user facility, providing experimental opportunities to researchers from national laboratories and academic institutions. For hydrodynamic experiments, it will be capable of achieving pressures exceeding 10 Mbar in a several cm/sup 3/ volume. The 23-MJ capacitor bank will consist of 240-kV Marx modules arranged around a central target chamber. The Marx modules will be discharged through vertical triplate transmission lines to a parallel plate collector inside the target chamber. The capacitor bank is designed to deliver a peak current of 27 to 32 MA with a 4- to 5- mu s risetime. Predicted performance with a typical load is presented. Descriptions of the major subsystems are also presented, including data from subsystem performance tests. (6 refs).

  6. AN OVERVIEW OF THE ADVANCED PLANNING AND SCHEDULING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Thales Botelho de Sousa

    2014-12-01

    Full Text Available Currently, the activities of the planning and control of companies are becoming increasingly complex and the managers of this area are constantly pressured to reduce operating costs, maintain inventories at adequate levels, to fully meet the demand of customers, and to respond effectively to changes that occur. The planning and scheduling task is important for most companies, so according to some authors, there is a need for further analysis of the practical use of production planning and control systems. Within the context of production planning and control systems development, in the 1990s were launched the APS systems, which represent an innovation when compared to their predecessors. This paper intended to provide through a literature review, the concepts, structure, capabilities, implementation process and benefits of using APS systems in the companies production planning and control. The main contribution of this research is to show a strong conceptual understanding regarding APS systems, which can be used as a solid theoretical reference for future researches.

  7. Domestic violence and the criminal justice system: an overview.

    Science.gov (United States)

    Erez, Edna

    2002-01-01

    It is only recently that domestic violence has been considered a violation of the law. Although men have battered, abused and mistreated their wives or intimate partners for a long time, historically, wife or partner abuse has been viewed as a "normal" part of marriage or intimate relationships. Only towards the end of the twentieth century, in the 1970 s, has domestic violence been defined a crime, justifying intervention by the criminal justice system. This article surveys the history of domestic violence as a criminal offense, and the justice system response to woman battering incidents. It first discusses the definition of the offense including debates around the offense definition, and the prevalence and reported frequency of the behavior termed woman battering. It then reviews the legal and social changes over time that have altered the criminal justice system s approach to domestic violence. Next it outlines the responses of the police, and the prosecution of domestic violence. The article also discusses research findings related to domestic violence and the criminal justice system, along with current controversies concerning the justice approach to domestic violence, its law enforcement, and related unfolding trends in the movement to address domestic violence through the criminal justice system.

  8. The association between periodontitis and systemic health: an overview.

    Science.gov (United States)

    Shangase, S L; Mohangi, G U; Hassam-Essa, S; Wood, N H

    2013-02-01

    A putative association between periodontitis and several systemic conditions is reflected in the literature. However, the nature of the relationship is not fully understood and at times may be confusing. It is reported that active periodontitis may contribute towards the development of a high systemic disease burden and that oral heath maintenance, following effective periodontal treatment, will improve the quality of life of the patient and reduce the morbidity of these systemic conditions. Evidence has been presented of direct relationships between periodontal disease and cardiovascular disease, with pre-term low-birth-weight infants and with diabetes mellitus, amongst others. Whether these relationships are causal or not, still needs to be established by further investigation. In the endeavour to make sense of this rapidly advancing area of research, a series of papers is planned for publication during the year 2012. These evidence-based, condensed reviews will hopefully provide clarity on the associations and/or possible causal relationships of periodonttis with specific systemic conditions. The present paper introduces and reviews the concept of the inter-relationships between periodontal and systemic health. The importance of a multidisciplinary approach with co-operation between dental and medical professionals, whether general practitioners or specialists, in the management of patients with these diseases is highlighted.

  9. The role of leptin in the respiratory system: an overview

    Directory of Open Access Journals (Sweden)

    Gourgoulianis Konstantinos I

    2010-10-01

    Full Text Available Abstract Since its cloning in 1994, leptin has emerged in the literature as a pleiotropic hormone whose actions extend from immune system homeostasis to reproduction and angiogenesis. Recent investigations have identified the lung as a leptin responsive and producing organ, while extensive research has been published concerning the role of leptin in the respiratory system. Animal studies have provided evidence indicating that leptin is a stimulant of ventilation, whereas researchers have proposed an important role for leptin in lung maturation and development. Studies further suggest a significant impact of leptin on specific respiratory diseases, including obstructive sleep apnoea-hypopnoea syndrome, asthma, COPD and lung cancer. However, as new investigations are under way, the picture is becoming more complex. The scope of this review is to decode the existing data concerning the actions of leptin in the lung and provide a detailed description of leptin's involvement in the most common disorders of the respiratory system.

  10. The role of leptin in the respiratory system: an overview.

    Science.gov (United States)

    Malli, Foteini; Papaioannou, Andriana I; Gourgoulianis, Konstantinos I; Daniil, Zoe

    2010-10-31

    Since its cloning in 1994, leptin has emerged in the literature as a pleiotropic hormone whose actions extend from immune system homeostasis to reproduction and angiogenesis. Recent investigations have identified the lung as a leptin responsive and producing organ, while extensive research has been published concerning the role of leptin in the respiratory system. Animal studies have provided evidence indicating that leptin is a stimulant of ventilation, whereas researchers have proposed an important role for leptin in lung maturation and development. Studies further suggest a significant impact of leptin on specific respiratory diseases, including obstructive sleep apnoea-hypopnoea syndrome, asthma, COPD and lung cancer. However, as new investigations are under way, the picture is becoming more complex. The scope of this review is to decode the existing data concerning the actions of leptin in the lung and provide a detailed description of leptin's involvement in the most common disorders of the respiratory system.

  11. Composites in energy generation and storage systems - An overview

    Science.gov (United States)

    Fulmer, R. W.

    Applications of glass-fiber reinforced composites (GER) in renewable and high-efficiency energy systems which are being developed to replace interim, long-term unacceptable energy sources such as foreign oil are reviewed. GFR are noted to have design flexibility, high strength, and low cost, as well as featuring a choice of fiber orientation and type of reinforcement. Blades, hub covers, nacelles, and towers for large and small WECS are being fabricated and tested and are displaying satisfactory strength, resistance to corrosion and catastrophic failure, impact tolerance, and light weight. Promising results have also been shown in the use of GFR as flywheel material for kinetic energy storage in conjunction with solar and wind electric systems, in electric cars, and as load levellers. Other applications are for heliostats, geothermal power plant pipes, dam-atoll tidal wave energy systems, and intake pipes for OTECs.

  12. Overview of the Long-Baseline Neutrino Facility cryogenic system

    CERN Document Server

    Montanari, David; Bremer, Johan; Delaney, Michael; Aurelien, Diaz; Doubnik, Roza; Haaf, Kevin; Hentschel, Steve; Norris, Barry; Voirin, Erik

    2017-01-01

    The Deep Underground Neutrino Experiment (DUNE) collaboration is developing a multi-kiloton Long-Baseline neutrino experiment that will be located one mile underground at the Sanford Underground Research Facility (SURF) in Lead, SD. In the present design, detectors will be located inside four cryostats filled with a total of 68,400 ton of ultrapure liquid argon, at the level of impurities lower than 100 parts per trillion of oxygen equivalent contamination. The Long-Baseline Neutrino Facility (LBNF) is developing the conventional facilities and cryogenics infrastructure supporting this experiment. The cryogenics system is composed of several sub-systems: External/Infrastructure, Proximity, and Internal cryogenics. It will be engineered, manufactured, commissioned, and qualified by an international engineering team. This contribution highlights the main features of the LBNF cryogenic system. It presents its performance, functional requirements and modes of operations. It also details the status of the design, ...

  13. CERN's LEIR Digital LLRF : system overview and operational experience

    CERN Document Server

    Angoletta, ME; Blas, A; Bracke, E; Butterworth, A; Dubouchet, F; Findlay, A; Pedersen, F; Sanchez-Quesada, J

    2010-01-01

    The Low Energy Ion Ring (LEIR) is an accumulation and acceleration ring in the Large Hadron Collider (LHC) ion injector chain. After its successful start in 2005, it has been running in three operational campaigns. The LEIR low-level RF (LLRF) system is the first all-digital system to operate in a CERN circular machine. Its capabilities include beam control tasks as well as dual-harmonic cavity voltage/phase servoing. All the system’s control parameters are fully configurable, remotely and in-between cycles; extensive built-in observation capabilities and diagnostics are available. The system is flexible, powerful and extremely reliable. This paper outlines the main building blocks and operational features, along with results obtained during the first years of operation.

  14. An overview of research requirements for stationary combustion systems

    Energy Technology Data Exchange (ETDEWEB)

    Chockie, A.D.; Barnhart, J.S.; Scherer, J.B.

    1983-08-01

    This paper presents a preliminary assessment of the basic research and development efforts required to ensure the efficient use of alternative fuels such as municipal solid waste (MSW) and wood material in stationary combustion systems. The major focus of the research efforts identified in this paper was the establishment of comprehensive fuel dependent analysis methods to assist in the optimal design and operation of stationary combustion systems using alternative fuels. The research recommendations are based on three sources of information; the review of current combustion design considerations, the examination of the impacts MSW and wood fuels have on efficient system operation, and input from individual involved in basic stationary combustion research activities and/or alternative fuel utilization operations.

  15. Overview of research requirements for stationary combustion systems

    Energy Technology Data Exchange (ETDEWEB)

    Chockie, A.D.; Barnhart, J.S.; Scherer, J.B.

    1983-05-01

    A preliminary assessment of the basic research and development efforts required to ensure the efficient use of alternative fuels such as municipal solid waste (MSW) and wood material in stationary combustion systems is presented. The major focus of the research efforts identified was the establishment of comprehensive fuel dependent analysis methods to assist in the optimal design and operation of stationary combustion systems using alternative fuels. The research recommendations are based on three sources of information: the review of current combustion design considerations, the examination of the impacts MSW and wood fuels have on efficient system operation, and input from individual involved in basic stationary combustion research activities and/or alternative fuel utilization operations.

  16. Overview of NASA Iodine Hall Thruster Propulsion System Development

    Science.gov (United States)

    Smith, Timothy D.; Kamhawi, Hani; Hickman, Tyler; Haag, Thomas; Dankanich, John; Polzin, Kurt; Byrne, Lawrence; Szabo, James

    2016-01-01

    NASA is continuing to invest in advancing Hall thruster technologies for implementation in commercial and government missions. The most recent focus has been on increasing the power level for large-scale exploration applications. However, there has also been a similar push to examine applications of electric propulsion for small spacecraft in the range of 300 kg or less. There have been several recent iodine Hall propulsion system development activities performed by the team of the NASA Glenn Research Center, the NASA Marshall Space Flight Center, and Busek Co. Inc. In particular, the work focused on qualification of the Busek 200-W BHT-200-I and development of the 600-W BHT-600-I systems. This paper discusses the current status of iodine Hall propulsion system developments along with supporting technology development efforts.

  17. Overview of the Earth System Science Education Alliance Online Courses

    Science.gov (United States)

    Botti, J.; Myers, R.

    2002-12-01

    Science education reform has skyrocketed over the last decade in large part thanks to technology-and one technology in particular, the Internet. The World Wide Web has opened up dynamic new online communities of learners. It has allowed educators from around the world to share thoughts about Earth system science and reexamine the way science is taught. A positive offshoot of this reform effort is the Earth System Science Education Alliance (ESSEA). This partnership among universities, colleges, and science education organizations is led by the Institute for Global Environmental Strategies and the Center for Educational Technologiestm at Wheeling Jesuit University. ESSEA's mission is to improve Earth system science education. ESSEA has developed three Earth system science courses for K-12 teachers. These online courses guide teachers into collaborative, student-centered science education experiences. Not only do these courses support teachers' professional development, they also help teachers implement Earth systems science content and age-appropriate pedagogical methods into their classrooms. The ESSEA courses are open to elementary, middle school, and high school teachers. Each course lasts one semester. The courses begin with three weeks of introductory content. Then teachers develop content and pedagogical and technological knowledge in four three-week learning cycles. The elementary school course focuses on basic Earth system interactions between land, life, air, and water. In week A of each learning cycle, teachers do earth system activities with their students. In week B teachers investigate aspects of the Earth system-for instance, the reason rocks change to soil, the relationship between rock weathering and soil nutrients, and the consequent development of biomes. In week C teachers develop classroom activities and share them online with other course participants. The middle school course stresses the effects of real-world events-volcanic eruptions

  18. Process Control System Cyber Security Standards - An Overview

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Evans; V Stanley Scown; Rolf Carlson; Shabbir Shamsuddin; George Shaw; Jeff Dagle; Paul W Oman; Jeannine Schmidt

    2005-10-01

    The use of cyber security standards can greatly assist in the protection of critical infrastructure by providing guidelines and requisite imperatives in the implementation of computer-controlled systems. These standards are most effective when the engineers and operators using the standards understand what each of the standards addresses and does not address. This paper provides a review and comparison of ten documents dealing with control system cyber security. It is not meant to be a complete treatment of all applicable standards; rather, this is an exemplary analysis showing the benefits of comparing and contrasting differing documents.

  19. An Overview of Advanced Data Acquisition System (ADAS)

    Science.gov (United States)

    Mata, Carlos T.; Steinrock, T. (Technical Monitor)

    2001-01-01

    The paper discusses the following: 1. Historical background. 2. What is ADAS? 3. R and D status. 4. Reliability/cost examples (1, 2, and 3). 5. What's new? 6. Technical advantages. 7. NASA relevance. 8. NASA plans/options. 9. Remaining R and D. 10. Applications. 11. Product benefits. 11. Commercial advantages. 12. intellectual property. Aerospace industry requires highly reliable data acquisition systems. Traditional Acquisition systems employ end-to-end hardware and software redundancy. Typically, redundancy adds weight, cost, power consumption, and complexity.

  20. Development of Solar Electricity Supply System in India: An Overview

    Directory of Open Access Journals (Sweden)

    Sandeep Kumar Gupta

    2013-01-01

    Full Text Available Solar electricity supply system has grown at very rapid pace in India during the last few years. A total of 1047.84 MW of grid connected photovoltaic projects and 160.8 MW of off-grid systems have been commissioned under different policy mechanisms between January 2010 and November 2012. It is observed that solar capacity development has achieved a greater height under state policies (689.81 MW than others. A study is made in this paper of various national and state level schemes, incentives, packages, instruments, and different mechanisms to promote solar photovoltaics and its effectiveness.

  1. The Cryogenic AntiCoincidence detector for ATHENA X-IFU: a program overview

    Science.gov (United States)

    Macculi, C.; Argan, A.; D'Andrea, M.; Lotti, S.; Laurenza, M.; Piro, L.; Biasotti, M.; Corsini, D.; Gatti, F.; Torrioli, G.; Fiorini, M.; Molendi, S.; Uslenghi, M.; Mineo, T.; Bulgarelli, A.; Fioretti, V.; Cavazzuti, E.

    2016-07-01

    The ATHENA observatory is the second large-class ESA mission, in the context of the Cosmic Vision 2015 - 2025, scheduled to be launched on 2028 at L2 orbit. One of the two on-board instruments is the X-IFU (X-ray Integral Field Unit): it is a TES-based kilo-pixels order array able to perform simultaneous high-grade energy spectroscopy (2.5 eV at 6 keV) and imaging over the 5 arcmin FoV. The X-IFU sensitivity is degraded by the particles background which is induced by primary protons of both solar and Cosmic Rays origin, and secondary electrons. The studies performed by Geant4 simulations depict a scenario where it is mandatory the use of reduction techniques that combine an active anticoincidence detector and a passive electron shielding to reduce the background expected in L2 orbit down to the goal level of 0.005 cts/cm2/s/keV, so enabling the characterization of faint or diffuse sources (e.g. WHIM or Galaxy cluster outskirts). From the detector point of view this is possible by adopting a Cryogenic AntiCoincidence (CryoAC) placed within a proper optimized environment surrounding the X-IFU TES array. It is a 4-pixels detector made of wide area Silicon absorbers sensed by Ir TESes, and put at a distance design of the CryoAC. Both the background studies and the detector development work is on-going to provide confident results about the expected residual background at the TES-array level, and the single pixel design to produce a detector for testing activity on 2016/2017. Here we will provide an overview of the CryoAC program, discussing some details about the background assessment having impact on the CryoAC design, the last single pixel characterization, the structural issues, followed by some programmatic aspects.

  2. Overview and application of the AQEM assessment system

    NARCIS (Netherlands)

    Hering, D.; Moog, O.; Sandin, L.; Verdonschot, P.F.M.

    2004-01-01

    The main objective of the European Union (EU) funded project AQEM1was to develop a framework of an assessment system for streams in Europe based on benthic macroinvertebrates that fulfils the requirements of the EU Water Framework Directive. Initial assessment methods for 28 European stream types

  3. Overview of the TJ-II remote participation system

    International Nuclear Information System (INIS)

    Vega, J.; Sanchez, E.; Portas, A.; Pereira, A.; Mollinedo, A.; Munoz, J.A.; Ruiz, M.; Barrera, E.; Lopez, S.; Machon, D.; Castro, R.; Lopez, D.

    2006-01-01

    The TJ-II remote participation system (RPS) is focused on providing remote access to elements that depend exclusively on characteristics of the TJ-II environment: data acquisition, diagnostics control systems and TJ-II operation tracking. Four key points were taken into account prior to starting the software design: access security, software execution platforms, software maintenance and distribution and delivery of operation events. The first, access security, was addressed by means of a distributed authentication and authorization system, PAPI. Regarding the other points, the development was based on the use of web servers (due to their standard character, flexibility and scalability) and Java technologies (due to their open nature, security properties and technological maturity). Software deployment was prepared to make use of the Java Network Launching Protocol (JNLP). On-line message distribution was planned according to a message oriented middleware. At present, the TJ-II RPS manages over 1000 digitization channels and 20 diagnostic control systems. The TJ-II RPS architecture is flexible, scalable and powerful enough to be applied to distributed environments and, in particular, it could be used in the ITER environment

  4. Embedded Systems Development Tools: A MODUS-oriented Market Overview

    Directory of Open Access Journals (Sweden)

    Loupis Michalis

    2014-03-01

    Full Text Available Background: The embedded systems technology has perhaps been the most dominating technology in high-tech industries, in the past decade. The industry has correctly identified the potential of this technology and has put its efforts into exploring its full potential. Objectives: The goal of the paper is to explore the versatility of the application in the embedded system development based on one FP7-SME project. Methods/Approach: Embedded applications normally demand high resilience and quality, as well as conformity to quality standards and rigid performance. As a result embedded system developers have adopted software methods that yield high quality. The qualitative approach to examining embedded systems development tools has been applied in this work. Results: This paper presents a MODUS-oriented market analysis in the domains of Formal Verification tools, HW/SW co-simulation tools, Software Performance Optimization tools and Code Generation tools. Conclusions: The versatility of applications this technology serves is amazing. With all this performance potential, the technology has carried with itself a large number of issues which the industry essentially needs to resolve to be able to harness the full potential contained. The MODUS project toolset addressed four discrete domains of the ESD Software Market, in which corresponding open tools were developed

  5. Overview of the Multimedia Environmental Pollutant Assessment System (MEPAS)

    International Nuclear Information System (INIS)

    Whelan, G.; Buck, J.W.; Strenge, D.L.; Droppo, J.G.; Hoopes, B.L.; Aiken, R.J.

    1992-01-01

    The Multimedia Environmental Pollutant Assessment System (MEPAS) is a physics-based risk computation code that integrates source-term, transport, and exposure models. Developed by Pacific Northwest Laboratory for screening and ranking of environmental problems, MEPAS is designed for site-specific assessments using readily available information to estimate potential health impacts. Risk values are computed for chemical and radioactive carcinogens; while hazard quotients, based on reference doses, are computed for noncarcinogens. This system has wide applicability to a range of environmental problems using air, groundwater, surface-water, overland, and exposure models. Whenever available and appropriate, EPA guidance and models were used to facilitate compatibility and acceptance. Although based on relatively standard transport and exposure computation approaches, the unique feature of MEPAS is that these approaches are integrated into a single system. The use of a single system provides a consistent basis for evaluating health impacts for a large number of problems and sites. Implemented on a desktop computer, a user-friendly shell allows the user to define the problem, input the required data, and execute the appropriate models. The MEPAS guidance documents include sources of information. MEPAS can be used for both screening and assessment applications for the remedial investigation/risk assessment/feasibility study and environment restoration processes

  6. Metal Allergy and Systemic Contact Dermatitis: An Overview

    Directory of Open Access Journals (Sweden)

    Yoko Yoshihisa

    2012-01-01

    Full Text Available Contact dermatitis is produced by external skin exposure to an allergen, but sometimes a systemically administered allergen may reach the skin and remain concentrated there with the aid of the circulatory system, leading to the production of systemic contact dermatitis (SCD. Metals such as nickel, cobalt, chromium, and zinc are ubiquitous in our environment. Metal allergy may result in allergic contact dermatitis and also SCD. Systemic reactions, such as hand dermatitis or generalized eczematous reactions, can occur due to dietary nickel or cobalt ingestion. Zinc-containing dental fillings can induce oral lichen planus, palmoplantar pustulosis, and maculopapular rash. A diagnosis of sensitivity to metal is established by epicutaneous patch testing and oral metal challenge with metals such as nickel, cobalt, chromium, and zinc. In vitro tests, such as the lymphocyte stimulating test (LST, have some advantages over patch testing to diagnose allergic contact dermatitis. Additionally, the determination of the production of several cytokines by primary peripheral blood mononuclear cell cultures is a potentially promising in vitro method for the discrimination of metal allergies, including SCD, as compared with the LST.

  7. Overview of NASA GRC Electrified Aircraft Propulsion Systems Analysis Methods

    Science.gov (United States)

    Schnulo, Sydney

    2017-01-01

    The accurate modeling and analysis of electrified aircraft propulsion concepts require intricate subsystem system component coupling. The major challenge in electrified aircraft propulsion concept modeling lies in understanding how the subsystems "talk" to each other and the dependencies they have on one another.

  8. ICAM: the ISABELLE control and monitoring system, global overview

    International Nuclear Information System (INIS)

    Dimmler, D.G.

    1975-01-01

    A first draft on the definition of the ISABELLE Control and Monitoring System is presented. Emphasis is given on the design strategies and on the proposed architectural concepts. A triangular network has been selected and defined. Some structural consideration of processor and bus structure hardware are given. (U.S.)

  9. 75 FR 13745 - Office of Innovation and Improvement Overview Information; Ready To Teach Program-General...

    Science.gov (United States)

    2010-03-23

    ... DEPARTMENT OF EDUCATION Office of Innovation and Improvement Overview Information; Ready To Teach... incorporate emerging technologies and innovative strategies into digital professional development content and... digital professional development content through cell phone applications, or the creation of new games...

  10. Overview of U.S. LMFBR structural materials mechanical properties program

    International Nuclear Information System (INIS)

    Horak, J.A.; Purdy, C.M.

    This paper presents the objective, scope, and status of the U.S. Department of Energy's Materials and Structures Program to develop a data base on mechanical properties of structural materials for out-of-core structures and components for LMFBRs. Information on the development of a reference data base on materials for the reactor system, reactor enclosure system, primary heat transport system, intermediate heat transport system, and steam generator system is included. In addition, the development of the data and analyses to account for the effects of temperature and stress, as well as water/steam, sodium, and radiation environments, is described. Plans for the development of alternative materials for future out-of-core applications are presented. (author)

  11. Conversion system overview assessment. Volume 1: solar thermoelectrics

    Energy Technology Data Exchange (ETDEWEB)

    Jayadev, T. S.; Henderson, J.; Finegold, J.; Benson, D.

    1979-08-01

    An assessment of thermoelectrics for solar energy conversion is given. There is significant potential for solar thermoelectrics in solar technologies where collector costs are low; e.g., Ocean Thermal Energy Conversion (OTEC) and solar ponds. Reports of two studies by manufacturers assessing the cost of thermoelectric generators in large scale production are included in the appendix and several new concepts thermoelectric systems are presented. (WHK)

  12. An Overview of Human Figure Modeling for Army Aviation Systems

    Science.gov (United States)

    2010-04-01

    space reach and vision analyses, while others are used to examine biomechanics or strength issues, for example. Still other human figure modeling... levers (ECLs) located on the side console panel. Figure 9 shows a large male with insufficient knee clearance at the lower section of the instrument...Measuring Machine CMWS Common Missile Warning System ECL Engine Control Lever FOV Field of View GMC Ground Movement Control HFE Human

  13. Healthcare systems--an international review: an overview.

    Science.gov (United States)

    Lameire, N; Joffe, P; Wiedemann, M

    1999-01-01

    Based on the source of their funding, three main models of healthcare can be distinguished. The first is the Beveridge model, which is based on taxation and has many public providers. The second is the Bismarck 'mixed' model, funded by a premium-financed social insurance system and with a mixture of public and private providers. Finally, the 'Private Insurance model' is only in existence in the US. The present report explores the impact of these healthcare models on the access to, quality and cost of healthcare in selected European countries. Access is nearly 100% in countries with a public provider system, while in most of the 'mixed' countries, the difference from 100% is made up by supplementary private insurance. No differences are seen between public and mixed provider systems in terms of quality of care, despite the fact that the countries with the former model spend, in general, less of their Gross National Product on healthcare. The Private Insurance/private provider model of the US produces the highest costs, but is lowest in access and is close to lowest ranking in quality parameters.

  14. Overview of the remedial action priority system (RAPS)

    International Nuclear Information System (INIS)

    Whelan, G.; Steelman, B.L.; Strenge, D.L.; Droppo, J.G.

    1986-01-01

    To provide DOE with a better management tool for prioritizing funding allocations for further site investigations and possible remediations, Pacific Northwest Laboratory developed a more objective, physics-based risk assessment methodology called the Remedial Action Priority System (RAPS). This methodology uses empirically, analytically, and semianalytically based mathematical algorithms and a pathways analysis to predict the potential for contaminant transport from a hazardous waste disposal site to local populations. Four major pathways for contaminant migration are considered in the RAPS methodology: groundwater, overland, surface water, and atmospheric. Using the predications of contaminant transport, simplified exposure assessments are performed for important receptors. The risks associated with the sites can then be calculated relative to other sites for each pathway and for all pathways together. The RAPS methodology addresses many of the typical limitations associated with other ranking systems; it considers: (1) more site information and constituent characteristics associated with the transport pathways; (2) chemical and radioactive wastes; (3) the potential direction of contaminant movement; (4) contaminant retention (e.g., dispersion and decay/degradation), where applicable; (5) population distributions; (6) various routes of exposure (e.g., inhalations, ingestion, and external exposure); (7) contaminant toxicities; (8) duration of exposure of the surrounding population; and (9) contaminant arrival time to sensitive receptors. Because RAPS is based on more site information and constituent characteristics, the scoring system of the RAPS methodology also reduces the subjectivity associated with prioritizing hazardous waste sites. The RAPS methodology requires minimum user knowledge of risk assessment and a minimum amount of input data

  15. Ostomy Home Skills Program

    Medline Plus

    Full Text Available ... Education Trauma Education Achieving Zero Preventable Deaths Trauma Systems Conference ... Advocacy Advocacy Overview Quality Payment Program QPP Resource Center QPP Resource Center ...

  16. Tuberculosis of the central nervous system: overview of neuroradiological findings

    International Nuclear Information System (INIS)

    Bernaerts, A.; Vanhoenacker, F.M.; Parizel, P.M.; Goethem, J.W.M. van; De Roeck, J.; De Schepper, A.M.; Altena, R. van; Laridon, A.; Coeman, V.

    2003-01-01

    This article presents the range of manifestations of tuberculosis (TB) of the craniospinal axis. Central nervous system (CNS) infection with Mycobacterium tuberculosis occurs either in a diffuse form as basal exudative leptomeningitis or in a localized form as tuberculoma, abscess, or cerebritis. In addition to an extensive review of computed tomography and magnetic resonance features, the pathogenesis and the relevant clinical setting are discussed. Modern imaging is a cornerstone in the early diagnosis of CNS tuberculosis and may prevent unnecessary morbidity and mortality. Contrast-enhanced MR imaging is generally considered as the modality of choice in the detection and assessment of CNS tuberculosis. (orig.)

  17. Overview of seismic base isolation systems, applications, and performance during earthquakes

    Energy Technology Data Exchange (ETDEWEB)

    Trummer, D.J.; Sommer, S.C.

    1993-08-01

    Seismic base isolation is a technique for mitigating the effects of earthquakes on structures. A structure is decoupled from the potentially damaging forces of an earthquake by placing a flexible isolation system between the structure and the ground. A data base has been created for the US Department of Energy which contains information about systems used to achieve seismic isolation, their applications in structures, and how they have performed during earthquakes. This paper will present and overview of the database.

  18. Assessing Costs and Benefits of Early Childhood Intervention Programs. Overview and Applicaton to the Starting Early Starting Smart Program

    National Research Council Canada - National Science Library

    Karoly, Lynn

    2001-01-01

    Agency and program administrators and decisionmakers responsible for implementing early childhood intervention programs are becoming more interested in quantifying the costs and benefits of such programs...

  19. Overview of PV Wind hybrid system activities in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Bopp, G.; Gabler, H.; Kiefer, K.; Preiser, K.; Wiemken, E. [Fraunhofer Institute for Solar Energy Systems ISE, Freiburg (Germany)

    1997-12-31

    Photovoltaic solar generators combined with diesel engines, in some cases additionally with wind energy converters, and battery energy storage are powering isolated mountain lodges, information centers in nature parks, isolated farms or dwellings all over Europe. A total of 300,000 buildings in Europe are estimated to be not connected to the public grid. This represents a major market potential for photovoltaic, as often photovoltaic power generation is less expensive than a connection to the electric utility. The Fraunhofer Institute for Solar Energy Systems ISE has planned, realized and monitored about 30 hybrid remote energy supply systems with PV generators typically around 5 kW for loads typically around 20 kWh per day. More than one hundred years of operational experience accumulated so far, are a sound foundation on which to draw an interim balance over problems solved and technical questions still under development. Room for further technical development is seen in the domain of system reliability and the reduction of operating costs as well as in the optimization of the utilization of the electric energy produced by the PV generator. [Espanol] Para la electrificacion en toda Europa de casas de campo en la montana, centros de informacion, parques naturales, granjas aisladas o conjuntos habitacionales, se estan usando generadores fotovoltaicos combinados con maquinas diesel, en algunos casos adicionalmente con convertidores de energia del viento y baterias para el almacenamiento de energia. Se estima que en Europa un total de 300,000 edificios no estan conectados a la red publica. Esto representa un gran mercado potencial para los sistemas fotovoltaicos, ya que a menudo la generacion fotovoltaica es menos costosa que una conexion a la empresa electrica. El Instituto Fraunhofer para Sistemas de Energia Solar ISE ha planeado, llevado a cabo y monitoreado alrededor de 30 sistemas hibridos remotos de suministro de energia con generadores fotovoltaicos

  20. The Maunakea Spectroscopic ExplorerStatus and System overview

    Science.gov (United States)

    Mignot, S.; Murowinski, R.; Szeto, K.; Blin, A.; Caillier, P.

    2017-12-01

    The Maunakea Spectroscopic Explorer (MSE) project explores the possibility of upgrading the existing CFHT telescope and collaboration to turn it into the most powerful spectroscopic facility available in the years 2020s. Its 10 meter aperture and its 1.5°² hexagonal field of view will allow both large and deep surveys, as complements to current (Gaia, eRosita, LOFAR) and future imaging (Euclid, WFIRST, SKA, LSST) surveys, but also to provide tentative targets to the TMT or the E-ELT. In perfect agreement with INSU's 2015-2020 prospective, besides being well represented in MSE's science team (23/105 members), France is also a major contributor to the Conceptual Design studies with CRAL developing a concept for the low and moderate spectrographs, DT INSU for the prime focus environment and GEPI for systems engineering.

  1. An overview of the Multimedia Environmental Pollutant Assessment System

    International Nuclear Information System (INIS)

    Michel, K.L.

    1992-06-01

    This report describes the Multimedia Environmental Pollutant Assessment System (MEPAS) computer model designed by Pacific Northwest Laboratory for use in evaluating the health risks associated with US Department of Energy (DOE) waste sites. This report has been prepared to provide DOE Oak Ridge Field Office personnel with a simplified explanation of MEPAS and an understanding of how MEPAS is used to quantify potential risks to human health. The scope and limitations of the MEPAS model are presented, and the possible contaminant release media and transport pathways are outlined. The two main types of health indexes generated -- the hazard potential index (HPI) and the maximum individual index are described; and calculations used to obtain these indexes are presented. Guidance on interpretation of the HPI is also included. Finally, the HPI calculations for 3 contaminants in a hypothetical environmental problem are demonstrated

  2. An overview of flywheel energy systems with HTS bearings

    Energy Technology Data Exchange (ETDEWEB)

    Wolsky, A.M. [Argonne National Laboratory, Argonne, IL (United States)]. E-mail: AWolsky@ANL.gov

    2002-05-01

    Passive magnetic bearings incorporating permanent magnets and ReBaCuO, together with carbon fibre, offer the possibility of increasing the stored, volumetric energy density of FES and unprecedentedly low idling loss of FES. Its stored energy need only satisfy customers' needs for the time it takes to bring on conventional 'back-up'. The FES itself must come up to power quickly enough to avoid any disruption in the customer's operation (e.g., continuous industrial processes involving fragile materials, for example paper forming). Such customers do not care about the price of electricity nearly as much as they care about not ruining their product, damaging their machines or having 'clean ups' that stop or slow output. Firms that engage in electronic commerce and/or telecommunications also value uninterruptible power. Another set of potential customers (construction, electric railroads) may wish to avoid fluctuations in their electrical supply or they may wish to avoid causing harm to others who may hold them liable for poor power quality. Finally, real time prices (e.g., every 15 s) and real time commands, disseminated via internet, and distributed storage might enable reduced system generation costs. Generators and FES makers would have to cooperate to make this feasible. Now, the central techno-economic challenge is to build a high-power, low-loss motor generator that reaches full power in a very short time. (author)

  3. Bioaccumulation of organochlorine pesticides in aquatic system--an overview.

    Science.gov (United States)

    Chopra, A K; Sharma, Mukesh Kumar; Chamoli, Shikha

    2011-02-01

    In recent years, various environmental issues have aroused a concern on the pollution of pesticides in rivers and in their various intercompartments. Multiple residues of pesticides discharged from industries or as a result of extensive use of agrochemicals in agriculture have been monitored. These pesticide residues contaminate the river ecosystem and its intercompartments such as sediments, and aquatic biota, and make it harmful to humans when they contaminate food and drinking water. The pesticide contamination in water, sediments, and aquatic biota has been reported to be beyond the acceptable range. The most commonly found pesticides are organochlorine, namely, dichlorodiphenyltrichloroethane, hexachlorocyclohexane, endosulfan, heptachlor, lindane, dieldrin, aldrin, endrin, and others. The paper discusses the general description, classification, and toxicity of pesticides; it also aims to create public awareness among people and appraise them with various alternate methods to combat the problem of pesticide contamination. An attempt has also been made to elucidate the findings of various works on pesticides in aquatic system and to highlight the challenging aspects of pesticide contamination, which have not attracted the attention of investigators yet.

  4. LCLS-II high power RF system overview and progress

    Energy Technology Data Exchange (ETDEWEB)

    Yeremian, Anahid Dian

    2015-10-07

    A second X-ray free electron laser facility, LCLS-II, will be constructed at SLAC. LCLS-II is based on a 1.3 GHz, 4 GeV, continuous-wave (CW) superconducting linear accelerator, to be installed in the first kilometer of the SLAC tunnel. Multiple types of high power RF (HPRF) sources will be used to power different systems on LCLS-II. The main 1.3 GHz linac will be powered by 280 1.3 GHz, 3.8 kW solid state amplifier (SSA) sources. The normal conducting buncher in the injector will use four more SSAs identical to the linac SSAs but run at 2 kW. Two 185.7 MHz, 60 kW sources will power the photocathode dual-feed RF gun. A third harmonic linac section, included for linearizing the bunch energy spread before the first bunch compressor, will require sixteen 3.9 GHz sources at about 1 kW CW. A description and an update on all the HPRF sources of LCLS-II and their implementation is the subject of this paper.

  5. Overview of Particle and Heavy Ion Transport Code System PHITS

    Science.gov (United States)

    Sato, Tatsuhiko; Niita, Koji; Matsuda, Norihiro; Hashimoto, Shintaro; Iwamoto, Yosuke; Furuta, Takuya; Noda, Shusaku; Ogawa, Tatsuhiko; Iwase, Hiroshi; Nakashima, Hiroshi; Fukahori, Tokio; Okumura, Keisuke; Kai, Tetsuya; Chiba, Satoshi; Sihver, Lembit

    2014-06-01

    A general purpose Monte Carlo Particle and Heavy Ion Transport code System, PHITS, is being developed through the collaboration of several institutes in Japan and Europe. The Japan Atomic Energy Agency is responsible for managing the entire project. PHITS can deal with the transport of nearly all particles, including neutrons, protons, heavy ions, photons, and electrons, over wide energy ranges using various nuclear reaction models and data libraries. It is written in Fortran language and can be executed on almost all computers. All components of PHITS such as its source, executable and data-library files are assembled in one package and then distributed to many countries via the Research organization for Information Science and Technology, the Data Bank of the Organization for Economic Co-operation and Development's Nuclear Energy Agency, and the Radiation Safety Information Computational Center. More than 1,000 researchers have been registered as PHITS users, and they apply the code to various research and development fields such as nuclear technology, accelerator design, medical physics, and cosmic-ray research. This paper briefly summarizes the physics models implemented in PHITS, and introduces some important functions useful for specific applications, such as an event generator mode and beam transport functions.

  6. An overview of inverted colloidal crystal systems for tissue engineering.

    Science.gov (United States)

    João, Carlos Filipe C; Vasconcelos, Joana Marta; Silva, Jorge Carvalho; Borges, João Paulo

    2014-10-01

    Scaffolding is at the heart of tissue engineering but the number of techniques available for turning biomaterials into scaffolds displaying the features required for a tissue engineering application is somewhat limited. Inverted colloidal crystals (ICCs) are inverse replicas of an ordered array of monodisperse colloidal particles, which organize themselves in packed long-range crystals. The literature on ICC systems has grown enormously in the past 20 years, driven by the need to find organized macroporous structures. Although replicating the structure of packed colloidal crystals (CCs) into solid structures has produced a wide range of advanced materials (e.g., photonic crystals, catalysts, and membranes) only in recent years have ICCs been evaluated as devices for medical/pharmaceutical and tissue engineering applications. The geometry, size, pore density, and interconnectivity are features of the scaffold that strongly affect the cell environment with consequences on cell adhesion, proliferation, and differentiation. ICC scaffolds are highly geometrically ordered structures with increased porosity and connectivity, which enhances oxygen and nutrient diffusion, providing optimum cellular development. In comparison to other types of scaffolds, ICCs have three major unique features: the isotropic three-dimensional environment, comprising highly uniform and size-controllable pores, and the presence of windows connecting adjacent pores. Thus far, this is the only technique that guarantees these features with a long-range order, between a few nanometers and thousands of micrometers. In this review, we present the current development status of ICC scaffolds for tissue engineering applications.

  7. System-Reliability Cumulative-Binomial Program

    Science.gov (United States)

    Scheuer, Ernest M.; Bowerman, Paul N.

    1989-01-01

    Cumulative-binomial computer program, NEWTONP, one of set of three programs, calculates cumulative binomial probability distributions for arbitrary inputs. NEWTONP, CUMBIN (NPO-17555), and CROSSER (NPO-17557), used independently of one another. Program finds probability required to yield given system reliability. Used by statisticians and users of statistical procedures, test planners, designers, and numerical analysts. Program written in C.

  8. Systemic lupus erythematosus and ocular involvement: an overview.

    Science.gov (United States)

    Dammacco, Rosanna

    2017-12-14

    Systemic lupus erythematosus (SLE) is a multisystem autoimmune disease of undefined etiology and with remarkably heterogeneous clinical features. Virtually any organ system can be affected, including the eye. SLE-related eye involvement can be diagnosed in approximately one-third of the patients and is usually indicative of disease activity. An early diagnosis and the adoption of suitable therapeutic measures are necessary to prevent sight-threatening consequences, especially in patients with juvenile SLE. Periocular lesions, such as eyelid involvement and orbital inflammation, are relatively rare and, in case of orbital masses, may require a biopsy control. Keratoconjunctivitis sicca or secondary Sjögren's syndrome is the most frequent ophthalmic manifestation of SLE. According to its variable severity, lubricating tear drops may be sufficient in mild cases, whereas cyclosporine-A ophthalmic solution, glucocorticoids (GCs), methotrexate, and/or other immunosuppressive drugs may be required in the more severe cases. Partial occlusion of the lacrimal punctum by thermal cautery is rarely applied. Although uncommon, episcleritis and scleritis can sometimes be detected as an initial finding of SLE and reveal themselves as moderate to intense ocular pain, redness, blurred vision, and lacrimation. Unilateral or more often bilateral retinopathy is responsible for visual loss of variable severity and is ascribed to vasculitis of the retinal capillaries and arterioles. In addition to the combined treatment suitable for all patients with active SLE, intravitreal bevacizumab should be considered in cases of severe vaso-occlusive retinopathy and laser photocoagulation in cases of neovascularization. Purtscher-like retinopathy is likely ascribable to the formation of microemboli that results in retinal vascular occlusion and microvascular infarcts. Choroidal disease is characterized by monolateral or bilateral blurred vision. Because of the choroidal effusion, retinal

  9. Overview of Electronic Nicotine Delivery Systems: A Systematic Review.

    Science.gov (United States)

    Glasser, Allison M; Collins, Lauren; Pearson, Jennifer L; Abudayyeh, Haneen; Niaura, Raymond S; Abrams, David B; Villanti, Andrea C

    2017-02-01

    Rapid developments in e-cigarettes, or electronic nicotine delivery systems (ENDS), and the evolution of the overall tobacco product marketplace warrant frequent evaluation of the published literature. The purpose of this article is to report updated findings from a comprehensive review of the published scientific literature on ENDS. The authors conducted a systematic review of published empirical research literature on ENDS through May 31, 2016, using a detailed search strategy in the PubMed electronic database, expert review, and additional targeted searches. Included studies presented empirical findings and were coded to at least one of nine topics: (1) Product Features; (2) Health Effects; (3) Consumer Perceptions; (4) Patterns of Use; (5) Potential to Induce Dependence; (6) Smoking Cessation; (7) Marketing and Communication; (8) Sales; and (9) Policies; reviews and commentaries were excluded. Data from included studies were extracted by multiple coders (October 2015 to August 2016) into a standardized form and synthesized qualitatively by topic. There were 687 articles included in this systematic review. The majority of studies assessed patterns of ENDS use and consumer perceptions of ENDS, followed by studies examining health effects of vaping and product features. Studies indicate that ENDS are increasing in use, particularly among current smokers, pose substantially less harm to smokers than cigarettes, are being used to reduce/quit smoking, and are widely available. More longitudinal studies and controlled trials are needed to evaluate the impact of ENDS on population-level tobacco use and determine the health effects of longer-term vaping. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  10. Overview of Electronic Nicotine Delivery Systems: A Systematic Review

    Science.gov (United States)

    Glasser, Allison M.; Katz, Lauren; Pearson, Jennifer L.; Abudayyeh, Haneen; Niaura, Raymond S.; Abrams, David B.; Villanti, Andrea C.

    2016-01-01

    Context Rapid developments in e-cigarettes, or electronic nicotine delivery systems (ENDS), and the evolution of the overall tobacco product marketplace warrant frequent evaluation of the published literature. The purpose of this article is to report updated findings from a comprehensive review of the published scientific literature on ENDS. Evidence acquisition The authors conducted a systematic review of published empirical research literature on ENDS through May 31, 2016, using a detailed search strategy in the PubMed electronic database, expert review, and additional targeted searches. Included studies presented empirical findings and were coded to at least one of nine topics: (1) Product Features; (2) Health Effects; (3) Consumer Perceptions; (4) Patterns of Use; (5) Potential to Induce Dependence; (6) Smoking Cessation; (7) Marketing and Communication; (8) Sales; and (9) Policies; reviews and commentaries were excluded. Data from included studies were extracted by multiple coders (October 2015 to August 2016) into a standardized form and synthesized qualitatively by topic. Evidence synthesis There were 686 articles included in this systematic review. The majority of studies assessed patterns of ENDS use and consumer perceptions of ENDS, followed by studies examining health effects of vaping and product features. Conclusions Studies indicate that ENDS are increasing in use, particularly among current smokers, pose substantially less harm to smokers than cigarettes, are being used to reduce/quit smoking, and are widely available. More longitudinal studies and controlled trials are needed to evaluate the impact of ENDS on population-level tobacco use and determine the health effects of longer-term vaping. PMID:27914771

  11. Proceedings of the Advanced Turbine Systems annual program review meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    Goals of the 8-year program are to develop cleaner, more efficient, and less expensive gas turbine systems for utility and industrial electric power generation, cogeneration, and mechanical drive units. During this Nov. 9-11, 1994, meeting, presentations on energy policy issues were delivered by representatives of regulatory, industry, and research institutions; program overviews and technical reviews were given by contractors; and ongoing and proposed future projects sponsored by university and industry were presented and displayed at the poster session. Panel discussions on distributed power and Advanced Gas Systems Research education provided a forum for interactive dialog and exchange of ideas. Exhibitors included US DOE, Solar Turbines, Westinghouse, Allison Engine Co., and GE.

  12. Overview of NASA's Space Environments and Effects (SEE) Program Technology Development Activities

    Science.gov (United States)

    Kauffman, Billy; Hardage, Donna; Minor, Jody

    2003-01-01

    Reducing size and weight of spacecraft, along with demanding increased performance capabilities, introduces many uncertainties in the engineering design community on how spacecraft and spacecraft systems will perform in space. The engineering design community is forever behind on obtaining and developing new tools and guidelines to mitigate the harmful effects of the space environment. Adding to this complexity is the push to use Commercial-off-the-shelf (COTS) and shrinking microelectronics behind less shielding utilizing new materials. The potential usage of unproven technologies such as large solar sail structures and nuclear electric propulsion introduces new requirements to develop new engineering tools. In order to drive down these uncertainties, NASA s SEE Program provides resources for technology development to accommodate or mitigate these harmful environments on spacecraft. This paper will describe the current SEE Program's, currently funded activities and possible future developments.

  13. An overview of the PIREX Proton Irradiation facility and its research program

    Energy Technology Data Exchange (ETDEWEB)

    Victoria, M.; Gavillet, D. [Association EURATOM, Villigen (Switzerland)

    1995-10-01

    The main design characteristics of PIREX (Proton Irradiation Experiment) are described. The facility is installed in the 590 MeV proton beam of the PSI accelerator system. Its main task is the irradiation and testing of fusion reactor candidate materials. Protons of this energy produce simultaneously in the target material displacement damage and impurities, amongst them helium. They can therefore simulate possible synergistic effects between helium and damage that would result from irradiations with the fusion neutrons. The research program being developed includes studies on both materials of technological interest, such as martensitic stainless steels and Mo - based alloys and basic radiation damage research on pure metals. The facility is also being used for actinide transmutation studies, in the so called ATHENA experiment. The main directions of the research program are described and examples of present results are given.

  14. Gas-cooled fast reactor safety - and overview and status of the U.S. program

    International Nuclear Information System (INIS)

    Torri, A.; Buttemer, D.R.

    1981-01-01

    In the revised GCFR Safety Program Plan a quantitative risk limit line has been adopted to establish requirements for the safety related functions and systems. The risk limit line is derived from an interpretation of NRC established licensing requirements, including those for LMFBR's. Multiple barriers to the progression of accident sequences are defined in the form of six Lines of Protection (LOPs). LOPs-1 to 3 are dedicated to accident prevention and represent the normal operating systems, the dedicated safety systems and the inherent design features, respectively. LOPs-4 to 6 are dedicated to the mitigation of core melt accident consequences and include in-vessel accident containment, secondary containment integrity and radiological attenuation, respectively. Cumulative frequency limits and consequence limits are established for each LOP. Design features associated with each LOP are described and the results of supporting safety analyses are summarized. (author)

  15. Biomass energy systems program summary

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    Research programs in biomass which were funded by the US DOE during fiscal year 1978 are listed in this program summary. The conversion technologies and their applications have been grouped into program elements according to the time frame in which they are expected to enter the commercial market. (DMC)

  16. An overview of the V&V of Flight-Critical Systems effort at NASA

    Science.gov (United States)

    Brat, Guillaume P.

    2011-01-01

    As the US is getting ready for the Next Generation (NextGen) of Air Traffic System, there is a growing concern that the current techniques for verification and validation will not be adequate for the changes to come. The JPDO (in charge of implementing NextGen) has given NASA a mandate to address the problem and it resulted in the formulation of the V&V of Flight-Critical Systems effort. This research effort is divided into four themes: argument-based safety assurance, distributed systems, authority and autonomy, and, software intensive systems. This paper presents an overview of the technologies that will address the problem.

  17. Civil and military satellite communications: A systems overview and the future developments

    Science.gov (United States)

    Dezaire, J. P.

    1991-02-01

    The project A90KM616, Orientatie SATCOM, is being performed on behalf of the Royal Netherlands Navy (RNLN) to assist the Navy on the subject of satellite communications. An overview is given of the phenomenon satellite communication. The result is a general overview of satellite communications for both civil and military applications. Some examples of applications are; international telephony, television broadcasting, small private business networks, and mobile (at the moment still principally maritime) communications. In these applications satellite communication systems provide a global coverage and a high flexibility. The scientific articles have not been considered because in this stage it was the intention to study on a specialist level the broad area of techniques. Magazines, books, and a number of reports of universities and research institutes have been the main sources of information. They provided afforded an understanding of the existing systems and insight in the future developments.

  18. U.S. Department of Energy photovoltaic energy program overview, fiscal year 1999

    Energy Technology Data Exchange (ETDEWEB)

    Weis-Taylor, P.; Moon, S.

    2000-02-28

    This ``annual report'' details the FY 1999 achievements of the US Department of Energy PV Program in the categories of Research and Development, Technology Development, and Systems Engineering and Applications. Highlights include development of a record-breaking concentrator solar cell that is 32.3% efficient; fabrication of a record CIGS (copper indium gallium diselenide) cell at 18.8% efficiency; sharing an R and D 100 award with Siemens Solar Industries and the California Energy Commission for development and deployment of commercial CIS thin-film modules; and support for the efforts of the PV Industry Roadmap Workshop.

  19. Overview of waste isoltaion safety assessment program and description of source term characterization task at PNL

    International Nuclear Information System (INIS)

    Bradley, D.

    1977-01-01

    A project is being conducted to develop and illustrate the methods and obtain the data necessary to assess the safety of long-term disposal of high-level radioactive waste in geologic formations. The methods and data will initially focus on generic geologic isolation systems but will ultimately be applied to the long-term safety assessment of specific candidate sites that are selected in the NWTS Program. The activities of waste isolation safety assessment (WISAP) are divided into six tasks: (1) Safety Assessment Concepts and Methods, (2) Disruptive Event Analysis, (3) Source Characterization, (4) Transport Modeling, (5) Transport Data and (6) Societal Acceptance

  20. Overview of the Liquid Argon Cryogenics for the Short Baseline Neutrino Program (SBN) at Fermilab

    Energy Technology Data Exchange (ETDEWEB)

    Norris, Barry [Fermilab; Bremer, Johan [CERN; Chalifour, Michel [Fermilab; Delaney, Mike [Fermilab; Dinnon, Mike [Fermilab; Doubnik, Roza [Fermilab; Geynisman, Michael [Fermilab; Hentschel, Steve [Fermilab; Kim, Min Jeong [Fermilab; Stefanik, Andy [Fermilab; Tillman, Justin [Fermilab; Zuckerbrot, Mike [Fermilab

    2017-01-01

    The Short-Baseline Neutrino (SBN) physics program will involve three LAr-TPC detectors located along the Booster Neutrino Beam (BNB) at Fermilab. This new SBN Program will deliver a rich and compelling physics opportunity, including the ability to resolve a class of experimental anomalies in neutrino physics and to perform the most sensitive search to date for sterile neutrinos at the eV mass-scale through both appearance and disappearance oscillation channels. The Program will be composed of an existing and operational detector known as Micro Boone (170 ton LAr mass) plus two new experiments known as the SBN Near Detector (SBND, ~ 260 ton) and the SBN Far Detector (SBN-FD, ~ 600 tons). Fermilab is now building two new facilities to house the experiments and incorporate all cryogenic and process systems to operate these detectors beginning in the 2018-2019 time frame. The SBN cryogenics are a collaborative effort between Fermilab and CERN. The SBN cryogenic systems for both detectors are composed of several sub-systems: External/Infrastructure (or LN2), Proximity (or LAr), and internal cryogenics. For each detector the External/Infrastructure cryogenics includes the equipment used to store and the cryogenic fluids needed for the operation of the Proximity cryogenics, including the LN2 and LAr storage facilities. The Proximity cryogenics consists of all the systems that take the cryogenic fluids from the external/infrastructure cryogenics and deliver them to the internal at the required pressure, temperature, purity and mass flow rate. It includes the condensers, the LAr and GAr purification systems, the LN2 and LAr phase separators, and the interconnecting piping. The Internal cryogenics is comprised of all the cryogenic equipment located within the cryostats themselves, including the GAr and LAr distribution piping and the piping required to cool down the cryostats and the detectors. These cryogenic systems will be engineered, manufactured, commissioned, and

  1. Quality assurance program for isotopic power systems

    International Nuclear Information System (INIS)

    Hannigan, R.L.; Harnar, R.R.

    1982-12-01

    This report summarizes the Sandia National Laboratories Quality Assurance Program that applies to non-weapon (reimbursable) Radioisotopic Thermoelectric Generators. The program has been implemented over the past 16 years on power supplies used in various space and terrestrial systems. The quality assurance (QA) activity of the program is in support of the Department of Energy, Office of Space Nuclear Projects. Basic elements of the program are described in the report and examples of program decumentation are presented

  2. Different Modeling Aspects and Energy Systems of Unified Power Quality Conditioner (UPQC): An Overview

    OpenAIRE

    Deshpande, Payal; Shrivastava, Amit; Khare, Anula

    2016-01-01

    Abstract: This paper highlights the classification of Unified Power Quality Conditioner (UPQC) to enhance the electric power quality at distribution levels. It aims to present a broad overview on the different possible UPQC system configurations for single-phase (two-wire) and three-phase (three-wire and four-wire) networks, different modeling approaches and backup energy storages, and recent developments in the field. It is noticed that several researchers have used different names for the U...

  3. Financial arrangements for health systems in low-income countries: an overview of systematic reviews

    OpenAIRE

    Wiysonge, Charles Shey; Paulsen, Elizabeth J.; Lewin, Simon; Ciapponi, Agustin; Herrera, Cristian A; Opiyo, Newton; Pantoja, Tomas; Rada, Gabriel; Oxman, Andrew David

    2017-01-01

    Background One target of the Sustainable Development Goals is to achieve "universal health coverage, including financial risk protection, access to quality essential health-care services and access to safe, effective, quality and affordable essential medicines and vaccines for all". A fundamental concern of governments in striving for this goal is how to finance such a health system. This concern is very relevant for low-income countries. Objectives To provide an overview of the evidence from...

  4. Fiber-Optic Sensing System: Overview, Development and Deployment in Flight at NASA

    Science.gov (United States)

    Chan, Hon Man; Parker, Allen R.; Piazza, Anthony; Richards, W. Lance

    2015-01-01

    An overview of the research and technological development of the fiber-optic sensing system (FOSS) at the National Aeronautics and Space Administration Armstrong Flight Research Center (NASA AFRC) is presented. Theory behind fiber Bragg grating (FBG) sensors, as well as interrogation technique based on optical frequency domain reflectometry (OFDR) is discussed. Assessment and validation of FOSS as an accurate measurement tool for structural health monitoring is realized in the laboratory environment as well as large-scale flight deployment.

  5. Program: A Record of the First 40 Years of Electronic Library and Information Systems

    Science.gov (United States)

    Tedd, Lucy A.

    2006-01-01

    Purpose: To provide a broad overview of the history of the journal Program: electronic library and information systems and its contents over its first 40 years. Design/methodology/approach: Analysis of content from the original published material, as well as from abstracting and indexing publications and from minutes of Editorial Board meetings.…

  6. Biomass energy systems program summary. Information current as of September 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-10-01

    This program summary describes each of the DOE's Biomass Energy System's projects funded or in existence during fiscal year 1979 and reflects their status as of September 30, 1979. The summary provides an overview of the ongoing research, development, and demonstration efforts of the preceding fiscal year as well. (DMC)

  7. An overview of the TA-55, Building PF-4 ventilation system

    International Nuclear Information System (INIS)

    1994-01-01

    An overview of the TA-55, Building PF-4 ventilation system is provided in the following sections. Included are descriptions of the zone configurations, equipment-performance criteria, ventilation support systems, and the ventilation-system evaluation criteria. Section 4.2.1.1 provides a brief discussion of the ventilation system function. Section 4.2.1.2 provides details on the overall system configuration. Details of system interfaces and support systems are provided in Section 4.2.1.3. Section 4.2.1.4 describes instrumentation and control needed to operate the ventilation system. Finally, Sections 4.2.1.5 and 4.2.1.6 describe system surveillance/maintenance and Technical Safety Requirements (TSR) Limitations, respectively. Note that the numerical parameters included in this description are considered nominal; set points and other specifications actually fall within operational bands

  8. An overview of the TA-55, Building PF-4 ventilation system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-02-22

    An overview of the TA-55, Building PF-4 ventilation system is provided in the following sections. Included are descriptions of the zone configurations, equipment-performance criteria, ventilation support systems, and the ventilation-system evaluation criteria. Section 4.2.1.1 provides a brief discussion of the ventilation system function. Section 4.2.1.2 provides details on the overall system configuration. Details of system interfaces and support systems are provided in Section 4.2.1.3. Section 4.2.1.4 describes instrumentation and control needed to operate the ventilation system. Finally, Sections 4.2.1.5 and 4.2.1.6 describe system surveillance/maintenance and Technical Safety Requirements (TSR) Limitations, respectively. Note that the numerical parameters included in this description are considered nominal; set points and other specifications actually fall within operational bands.

  9. 75 FR 6007 - Office of Innovation and Improvement; Overview Information; School Leadership Grant Program...

    Science.gov (United States)

    2010-02-05

    ... DEPARTMENT OF EDUCATION Office of Innovation and Improvement; Overview Information; School... increase the number of students who graduate prepared for success in college and their careers. Principals..., 2004. Despite their importance, school leaders are often denied the autonomy, resources, or support...

  10. An overview of heat exchanger technology in the Canadian nuclear program

    International Nuclear Information System (INIS)

    Carlucci, L.N.; Dalrymple, D.G.; Ko, P.L.; Pathania, R.; Pettigrew, M.I.; Scott, D.A.

    1981-06-01

    This paper provides an overview of the Canadian approach to the reliability and serviceability of heat exchange equipment used in nuclear power stations and heavy water plants. Current work in vibration and fretting predictions, thermal-hydraulic analyses, and corrosion research is described. Procedures developed for in-service inspection, in situ tube replacment and chemical cleaning of corrosion products are also outlined

  11. 76 FR 13137 - Equity Assistance Centers Program; Office of Elementary and Secondary Education; Overview...

    Science.gov (United States)

    2011-03-10

    ... Education; Overview Information; Training and Advisory Services; Equity Assistance Centers (Formerly the... following priority area: Increasing the retention, particularly in high-poverty schools (as defined in this... principals in high-poverty schools. 2. Improving School Engagement, School Environment, and School Safety and...

  12. 75 FR 67705 - Office of Postsecondary Education; Overview Information; Talent Search (TS) Program; Notice...

    Science.gov (United States)

    2010-11-03

    ... DEPARTMENT OF EDUCATION Office of Postsecondary Education; Overview Information; Talent Search (TS... currently being served by a Talent Search project, especially schools that the State has identified as the... reliable third-party sources when providing information on the implementation of their Talent Search...

  13. Overview of the TCV tokamak program: scientific progress and facility upgrades.

    Czech Academy of Sciences Publication Activity Database

    Coda, S.; Ficker, Ondřej; Horáček, Jan; Papřok, Richard

    2017-01-01

    Roč. 57, October (2017), č. článku 102011. ISSN 0029-5515 EU Projects: European Commission(XE) 633053 - EUROfusion Institutional support: RVO:61389021 Keywords : TCV * tokamak * overview Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) Impact factor: 3.307, year: 2016

  14. Management Overview of System Technical Support Plan for the FIREFINDER System Support Center.

    Science.gov (United States)

    1980-08-06

    selection and acquisition of computer programs and related servicesJ ( embedded tactical systems are excluded). DIR 4120.3 Department of Defense...systems. Estab- lishes Management Steering Committee for Embedded Computer Resources. DOA is to develop and implement a disciplined approach to the...II De... Se,d Mmmsbe A Development Comand i I .UIORMAT 6& P1•ESET " eb. UPERSKO ATTN: DRDCO-TCS-BA-1 C . . . . Fort Monmouth, NJ 07703 Xl - 2_1SP63

  15. XTAL system of crystallographic programs: programmer's manual

    International Nuclear Information System (INIS)

    Hall, S.R.; Stewart, J.M.; Norden, A.P.; Munn, R.J.; Freer, S.T.

    1980-02-01

    This document establishes the basis for collaborative writing of transportable computer programs for x-ray crystallography. The concepts and general-purpose utility subroutines described here can be readily adapted to other scientific calculations. The complete system of crystallographic programs and subroutines is called XTAL and replaces the XRAY (6,7,8) system of programs. The coding language for the XTAL system is RATMAC (5). The XTAL system of programs contains routines for controlling execution of application programs. In this sense it forms a suboperating system that presents the same computational environment to the user and programmer irrespective of the operating system in use at a particular installation. These control routines replace all FORTRAN I/O code, supply character reading and writing, supply binary file reading and writing, serve as a support library for applications programs, and provide for interprogram communication

  16. Trends in Canadian faculties of education: An overview of graduate programs, curricular offerings, exit requirements, and modes of delivery.

    Directory of Open Access Journals (Sweden)

    Carla Abreu Ellis

    2008-07-01

    Full Text Available Introduction This research investigated universities registered with the Association of Universities and Colleges of Canada (AUCC whose primary instructional language was English. A content analysis was performed on university web pages related to the following content: (a frequency of graduate programs being offered, (b types of degrees being offered, (c frequency and variation of program of study offerings, (d variation of exit requirements, and (e modalities of course delivery. This research provides an overview and analysis of graduate level programs, more precisely Masters and Doctorate degrees, offered through faculties of education in Canada. An understanding of the findings of this research may benefit Canadian university administrative bodies in providing a source in which they may compare findings with their current offerings and programming. Prospective students of graduate programs in education may also benefit from the information provided in this study when choosing a program of study by ameliorating their knowledge of current programs, curriculum offerings, and modes of course delivery being offered by faculties of education in Canada.

  17. Exploring Clinical Overview

    DEFF Research Database (Denmark)

    Fleron, Benedicte

    Clinical overview is explored at four emergency departments (EDs) during the introduction of a new IT system to support hereof. Important aspects of clinical overview are described for the clinical practice and for the further development of the IT system....

  18. Photovoltaic energy systems. Program summary

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-01-01

    The ongoing research, development, and demonstration efforts of the Photovoltaics Program are highlighted and each of the US Department of Energy's current photovoltaics projects initiated or renewed during fiscal year 1981 is described, including its title, directing organization, project engineer, contractor, principal investigator, contract period, funding, and objectives. The Photovoltaics Program is briefly summarized, including the history and organization and highlights of the research and development and of planning, assessment, and integration. Also summarized is the Federal Photovoltaic Utilization Program. An exhaustive bibliography is included. (LEW)

  19. An overview of the status of nuclear science education in pre-college programs

    International Nuclear Information System (INIS)

    Ling, A.C.; Atwood, C.H.

    1993-01-01

    This communication will provide an overview of the papers given in the Symposium entitled 'Pre-College Education in Nuclear Science' held under the auspices of the Division of Nuclear Chemistry and Technology of the American Chemical Society, and given at the 204th National Meeting of the American Chemical Society in Washington, D.C., on August 24-28, 1992. The Symposium consisted of 45 invited papers, and covered topics in nuclear science education at the high school, middle school, and elementary school levels. The Symposium also presented an overview of the involvement of university and federal laboratories in providing teaching and research opportunities for pre-college faculty and students, curriculum enhancement by special interest groups such as power and utility companies, as well as funding opportunities from private and federal agencies. (author)

  20. Programming Guidelines for FBD Programs in Reactor Protection System Software

    International Nuclear Information System (INIS)

    Jung, Se Jin; Lee, Dong Ah; Kim, Eui Sub; Yoo, Jun Beom; Lee, Jang Su

    2014-01-01

    Properties of programming languages, such as reliability, traceability, etc., play important roles in software development to improve safety. Several researches are proposed guidelines about programming to increase the dependability of software which is developed for safety critical systems. Misra-c is a widely accepted programming guidelines for the C language especially in the sector of vehicle industry. NUREG/CR-6463 helps engineers in nuclear industry develop software in nuclear power plant systems more dependably. FBD (Function Block Diagram), which is one of programming languages defined in IEC 61131-3 standard, is often used for software development of PLC (programmable logic controllers) in nuclear power plants. Software development for critical systems using FBD needs strict guidelines, because FBD is a general language and has easily mistakable elements. There are researches about guidelines for IEC 61131-3 programming languages. They, however, do not specify details about how to use languages. This paper proposes new guidelines for the FBD based on NUREG/CR-6463. The paper introduces a CASE (Computer-Aided Software Engineering) tool to check FBD programs with the new guidelines and shows availability with a case study using a FBD program in a reactor protection system. The paper is organized as follows

  1. NASA's Space Launch System Program Update

    Science.gov (United States)

    May, Todd; Lyles, Garry

    2015-01-01

    Hardware and software for the world's most powerful launch vehicle for exploration is being welded, assembled, and tested today in high bays, clean rooms and test stands across the United States. NASA's Space Launch System (SLS) continued to make significant progress in 2014 with more planned for 2015, including firing tests of both main propulsion elements and the program Critical Design Review (CDR). Developed with the goals of safety, affordability, and sustainability, SLS will still deliver unmatched capability for human and robotic exploration. The initial Block 1 configuration will deliver more than 70 metric tons of payload to low Earth orbit (LEO). The evolved Block 2 design will deliver some 130 metric tons to LEO. Both designs offer enormous opportunity and flexibility for larger payloads, simplifying payload design as well as ground and on-orbit operations, shortening interplanetary transit times, and decreasing overall mission risk. Over the past year, every vehicle element has manufactured or tested hardware. An RS-25 liquid propellant engine was hotfire-tested at NASA's Stennis Space Center, Miss. for the first time since 2009 exercising and validating the new engine controller, the renovated A-1 test stand, and the test teams. Four RS-25s will power the SLS core stage. A qualification five-segment solid rocket motor incorporating several design, material, and process changes was scheduled to be test-fired in March at the prime contractor's facility in Utah. The booster also successfully completed its Critical Design Review (CDR) validating the planned design. All six major manufacturing tools for the core stage are in place at the Michoud Assembly Facility in Louisiana, and have been used to build numerous pieces of confidence, qualification, and even flight hardware, including barrel sections, domes and rings used to assemble the world's largest rocket stage. SLS Systems Engineering accomplished several key tasks including vehicle avionics software

  2. Joint Task Force on Undergraduate Physics Programs (J-TUPP): Overview and Major Findings

    Science.gov (United States)

    Heron, Paula

    2016-03-01

    The Joint Task Force on Undergraduate Physics Programs (JTUPP) was formed in response to growing awareness in the physics community that physics majors pursue a wide range of careers after graduation, with very few ending up in academia. The task force is charged with identifying the skills and knowledge that undergraduate physics degree holders should possess to be well prepared for a diverse set of careers, and providing guidance for physicists considering revising the undergraduate curriculum to improve the education of a diverse student population. Task force members represent large and small universities, professional societies, and industry, and have expertise in a broad range of areas including entrepreneurship, physics education research and systemic change in education. We reviewed employment data, surveys of employers, and reports generated by other disciplines. We also met with physicists in selected industries to get their views on the strengths and weaknesses of physics graduates, commissioned a series of interviews with recent physics graduates employed in the private sector, and identified exemplary programs that ensure that all of their students are well prepared to pursue a wide range of career paths. The findings and recommendations will be summarized.

  3. ORNL long-range environmental and waste management plan: Program overview and summary

    International Nuclear Information System (INIS)

    Bates, L.D.; Berry, J.B.; Butterworth, G.E.

    1988-04-01

    The primary purpose of this report is to provide a thorough and systematic planning document to reflect the continuing process of site assessment, strategy development, and planning for the current and long-term control of environmental issues, waste management practices, and remedial action requirements. The docuemnt also provides an estimate of the resources required to implement the current plan. This document is not intended to be a budget document: it is, however, intended to provide guidance to both Martin Marietta Energy Systems, Inc., and the US Department of Energy (DOE) Management as to the near order of magnitude of the resources (primarily funding requirements) and the time frame required to execute the strategy in the present revision of the plan. The near-term (one to three years) part of the plan is a realistic assessment of the current program and ongoing capital projects and reflects the efforts preceived to be necessary to comply with all current state and federal regulations and DOE orders. It also should be in general agreement with current budget (funding) requests and obligations for these immediate years. Beyond the immediate time frame, the document reflects the strategy and the project and funding estimates as a snapshot at the time of publication. Annual revision will reflect the continuing evoltuion and development of environmental and waste management processes, characterizations, remedial actions, regulations, an strategies for the establishment and conduct of a comprehensive environmental and waste management program. 15 figs., 10 tabs

  4. ORNL long-range environmental and waste management plan: Program overview and summary

    Energy Technology Data Exchange (ETDEWEB)

    Bates, L.D.; Berry, J.B.; Butterworth, G.E.; du Mont, S.P.; Easterday, C.A.; Geisler, A.H.; Hill, L.G.; Kendrick, C.M.; McNeese, L.E.; Myrick, T.E.; Pudelek, R.E.; Rohwer, P.S.; Scanlan, T.F.; Stratton, L.E.; Trabalka, J.R.; Youngblood, E.L.

    1988-04-01

    The primary purpose of this report is to provide a thorough and systematic planning document to reflect the continuing process of site assessment, strategy development, and planning for the current and long-term control of environmental issues, waste management practices, and remedial action requirements. The docuemnt also provides an estimate of the resources required to implement the current plan. This document is not intended to be a budget document: it is, however, intended to provide guidance to both Martin Marietta Energy Systems, Inc., and the US Department of Energy (DOE) Management as to the near order of magnitude of the resources (primarily funding requirements) and the time frame required to execute the strategy in the present revision of the plan. The near-term (one to three years) part of the plan is a realistic assessment of the current program and ongoing capital projects and reflects the efforts preceived to be necessary to comply with all current state and federal regulations and DOE orders. It also should be in general agreement with current budget (funding) requests and obligations for these immediate years. Beyond the immediate time frame, the document reflects the strategy and the project and funding estimates as a snapshot at the time of publication. Annual revision will reflect the continuing evoltuion and development of environmental and waste management processes, characterizations, remedial actions, regulations, an strategies for the establishment and conduct of a comprehensive environmental and waste management program. 15 figs., 10 tabs.

  5. Next Generation Safeguards Initiative: Overview and Policy Context of UF6 Cylinder Tracking Program

    Energy Technology Data Exchange (ETDEWEB)

    Boyer, Brian D [Los Alamos National Laboratory; Whitaker, J. Michael [ORNL; White-Horton, Jessica L. [ORNL; Durbin, Karyn R. [NNSA

    2012-07-12

    Thousands of cylinders containing uranium hexafluoride (UF{sub 6}) move around the world from conversion plants to enrichment plants to fuel fabrication plants, and their contents could be very useful to a country intent on diverting uranium for clandestine use. Each of these large cylinders can contain close to a significant quantity of natural uranium (48Y cylinder) or low-enriched uranium (LEU) (30B cylinder) defined as 75 kg {sup 235}U which can be further clandestinely enriched to produce 1.5 to 2 significant quantities of high enriched uranium (HEU) within weeks or months depending on the scale of the clandestine facility. The National Nuclear Security Administration (NNSA) Next Generation Safeguards Initiative (NGSI) kicked off a 5-year plan in April 2011 to investigate the concept of a unique identification system for UF{sub 6} cylinders and potentially to develop a cylinder tracking system that could be used by facility operators and the International Atomic Energy Agency (IAEA). The goal is to design an integrated solution beneficial to both industry and inspectorates that would improve cylinder operations at the facilities and provide enhanced capabilities to deter and detect both diversion of low-enriched uranium and undeclared enriched uranium production. The 5-year plan consists of six separate incremental tasks: (1) define the problem and establish the requirements for a unique identification (UID) and monitoring system; (2) develop a concept of operations for the identification and monitoring system; (3) determine cylinder monitoring devices and technology; (4) develop a registry database to support proof-of-concept demonstration; (5) integrate that system for the demonstration; and (6) demonstrate proof-of-concept. Throughout NNSA's performance of the tasks outlined in this program, the multi-laboratory team emphasizes that extensive engagement with industry stakeholders, regulatory authorities and inspectorates is essential to its success.

  6. Records Center Program Billing System

    Data.gov (United States)

    National Archives and Records Administration — RCPBS supports the Records center programs (RCP) in producing invoices for the storage (NARS-5) and servicing of National Archives and Records Administration’s...

  7. Overview of the program on soft x-ray lasers and their applications at Princeton

    International Nuclear Information System (INIS)

    Suckewer, S.; Ilcisin, K.; Princeton Univ., NJ

    1991-05-01

    In the last several years, rapid progress in the development of soft x-ray lasers (SXL) has been observed at a number of laboratories worldwide. Although SXLs are very ''young'' devices they have already been used for microscopy and holography, and new ideas emerging for broader application of SXLs to microscopy, holography and lithography. This paper describes the work at Princeton University on the development of a soft x-ray imaging transmission microscopy using a SXL as a radiation source and work on the development of a novel soft x-ray reflection microscope and its application to biological cell studies and lithography. Progress in the development of a photopumped VUV laser (60 nm), and programs for the development of a small scale SXL and for the application of a powerful subpicosecond KrF laser system are also discussed. 35 refs., 9 figs., 1 tab

  8. Geriatric Nursing Master’s Degree Program Overviews in Iran: Review Article

    Directory of Open Access Journals (Sweden)

    Leila Valizadeh

    2016-03-01

    Full Text Available ​The increasing number of elderly in recent years has led to great changes in the country's healthcare system. One of these changes is developing geriatric nursing master degree. This paper, with non-systematic approach, presents an evaluation of geriatric nursing graduate program in Iran. According to the results, mission and curriculum of the course are written in details. The number of faculties and students is rising every year. It seems that “the teacher shortage” and “determining the accurate and appropriate job status” for graduates are the main challenges. Given the young nature of the field, it is strongly recommended to reassess after some years.

  9. An overview of review guidelines for HDL programmable devices in nuclear safety systems

    International Nuclear Information System (INIS)

    Komanduri, Raghavan; Srivani, L.; Thirugnana Murthy, D.

    2013-01-01

    HDL programmable devices viz. CPLDs and FPGAs are increasingly being used to implement digital designs in the I and C systems performing safety functions of nuclear power plants. Synthesizable RTL descriptions manually written in HDLs are the first step in developing industry standard large scale digital designs. The reliability of the implementation is determined by the methodologies followed by the designer during development. Very few guidelines on HPD design practices, specific to nuclear industry are available. This paper presents an overview of the existing guidelines such as IEC 62566 and U.S. NRC's 'Review guidelines for FPGAs in nuclear power plant safety systems'. (author)

  10. Overview of Threats and Failure Models for Safety-Relevant Computer-Based Systems

    Science.gov (United States)

    Torres-Pomales, Wilfredo

    2015-01-01

    This document presents a high-level overview of the threats to safety-relevant computer-based systems, including (1) a description of the introduction and activation of physical and logical faults; (2) the propagation of their effects; and (3) function-level and component-level error and failure mode models. These models can be used in the definition of fault hypotheses (i.e., assumptions) for threat-risk mitigation strategies. This document is a contribution to a guide currently under development that is intended to provide a general technical foundation for designers and evaluators of safety-relevant systems.

  11. Bioinspired Principles for Large-Scale Networked Sensor Systems: An Overview

    Directory of Open Access Journals (Sweden)

    Thomas Skjødeberg Toftegaard

    2011-04-01

    Full Text Available Biology has often been used as a source of inspiration in computer science and engineering. Bioinspired principles have found their way into network node design and research due to the appealing analogies between biological systems and large networks of small sensors. This paper provides an overview of bioinspired principles and methods such as swarm intelligence, natural time synchronization, artificial immune system and intercellular information exchange applicable for sensor network design. Bioinspired principles and methods are discussed in the context of routing, clustering, time synchronization, optimal node deployment, localization and security and privacy.

  12. ATMEA1 Nuclear Power Plant. Overview of the HF engineering program

    International Nuclear Information System (INIS)

    Rivere, Cyril; Mashio, Kenji; Martinez-Pellegrini, Diego

    2015-01-01

    ATMEA, a joint-venture between AREVA and Mitsubishi Heavy Industries has developed the ATMEA1 Pressurized Water Reactor (PWR) Nuclear Island (NI), leveraging both of its shareholders’ proficient technologies, innovations and experiences. The scope of the ATMEA1 PWR development covers the complete scope of engineering works necessary to develop a standard product. As a recently emergent discipline in the field of nuclear plant engineering, Human Factor Engineering (HFE) is one of the challenges which has to be integrated within new plant development process. At early design stages of ATMEA1 development, ATMEA has defined and implemented an extensive NUREG-based HFE program, encompassing HFE Preliminary Analyses, Human-Systems Interfaces (HSI) Design and Verification and Validation (V and V) activities. The HFE Preliminary Analyses are defined through Operating Experience Review (OER), Functional Requirement Analysis and Function Allocation (FRA/FA) and Task Analysis (TA). Human-System Interface (HSI) Design and related V and V activities are based on Control Center, Control Rooms and Human-Machine Interfaces (HMIs). All these steps are implemented within the ATMEA Project through a structured generic documentation basis by a HFE team composed of HF specialists from both AREVA and MHI and managed by ATMEA. ATMEA1 development project aims to develop flexible and robust design and process which can be easily adapted to be compliant to any regulations over the world. U.S. regulatory guidelines related to HFE (e.g. ref. [1] and ref. [2]) were applied as a basis for this project. This paper presents the overall ATMEA1 HFE program content and the related process used to favor its implementation within the Project; through the collaboration between MHI and AREVA under ATMEA lead. A special focus is made on the HFE team composition, roles and responsibilities, the management of interfaces with the relevant engineering disciplines and the tools used to support the HFE

  13. An overview of CFD and PIV application in investigation of solar thermal systems

    DEFF Research Database (Denmark)

    Ai, Ning; Fan, Jianhua; Ji, Jianbing

    2007-01-01

    Abstract:Solar thermal system is one of the most widely used technologies of renewable energy ipresently. In order to further improve the system design and to increase its performance,a deep understanding of the complicated fluid flow and heat transfer in the system components is necessary....... The most promising solution to this challenge is the use of computational fluid dynamics (CFD) in combination with particle image velocimetry (PIV),which will be the future trend in the investigation of solar thermal systems. The aim of this work is to give an overview of the status of the CFD......-PIV application in solar thermal systems. Key words: Solar thermal system,CFD,PIV...

  14. USAF Mobility Program Water Treatment System.

    Science.gov (United States)

    also be necessary. Water treatment systems are presented which can be developed to yield potable water from these sources. The proposed systems can be designed to meet the requirements of the Bare Base Mobility Program. (Author)

  15. Detense Logistics Agency's Weapons Systems Support Program

    National Research Council Canada - National Science Library

    1994-01-01

    The Defense Logistics Agency's (DLA) Weapons Systems Support Program was established to enhance the Military Departments weapons systems readiness and sustainability by providing enhanced supply support levels for DLA managed items...

  16. CREDIT SYSTEM AND CREDIT GUARANTEE PROGRAMS

    OpenAIRE

    Turgay GECER

    2012-01-01

    Credit system is an integrated architecture consisted of financial information, credit rating, credit risk management, receivables and credit insurance systems, credit derivative markets and credit guarantee programs. The main purpose of the credit system is to provide the functioning of all credit channels and to make it easy to access of credit sources demanded by all of real and legal persons in any economic system. Credit guarantee program, the one of prominent elements of the credit syst...

  17. 77 FR 70409 - System Safety Program

    Science.gov (United States)

    2012-11-26

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION Federal Railroad Administration 49 CFR Part 270 2130-AC31 System Safety Program AGENCY: Federal Railroad... commuter and intercity passenger railroads to develop and implement a system safety program (SSP) to...

  18. Overview of C-2W Field-Reversed Configuration Experimental Program

    Science.gov (United States)

    Gota, H.; Binderbauer, M. W.; Tajima, T.; Putvinski, S.; Tuszewski, M.; Dettrick, S.; Korepanov, S.; Romero, J.; Smirnov, A.; Song, Y.; Thompson, M. C.; van Drie, A.; Yang, X.; Ivanov, A. A.; TAE Team

    2017-10-01

    Tri Alpha Energy's research has been devoted to producing a high temperature, stable, long-lived field-reversed configuration (FRC) plasma state by neutral-beam injection (NBI) and edge biasing/control. C-2U experiments have demonstrated drastic improvements in particle and energy confinement properties of FRC's, and the plasma performance obtained via 10 MW NBI has achieved plasma sustainment of up to 5 ms and plasma (diamagnetism) lifetimes of 10 + ms. The emerging confinement scaling, whereby electron energy confinement time is proportional to a positive power of the electron temperature, is very attractive for higher energy plasma confinement; accordingly, verification of the observed Te scaling law will be a key future research objective. The new experimental device, C-2W (now also called ``Norman''), has the following key subsystem upgrades from C-2U: (i) higher injected power, optimum energies, and extended pulse duration of the NBI system; (ii) installation of inner divertors with upgraded edge-biasing systems; (iii) fast external equilibrium/mirror-coil current ramp-up capability; and (iv) installation of trim/saddle coils for active feedback control of the FRC plasma. This paper will review highlights of the C-2W program.

  19. Overview of C-2U FRC Experimental Program and Plans for C-2W

    Science.gov (United States)

    Gota, H.; Binderbauer, M. W.; Tajima, T.; Putvinski, S.; Tuszewski, M.; Dettrick, S.; Korepanov, S.; Smirnov, A.; Thompson, M. C.; Yang, X.; Cappello, M.; Ivanov, A. A.; TAE Team

    2016-10-01

    Tri Alpha Energy's experimental program has been focused on a demonstration of reliable field-reversed configuration (FRC) formation and sustainment, driven by fast ions via high-power neutral-beam (NB) injection. The world's largest compact-toroid experimental devices, C-2 and C-2U, have successfully produced a well-stabilized, sustainable FRC plasma state with NB injection (input power, PNB 10 + MW; 15 keV hydrogen) and end-on coaxial plasma guns. Remarkable improvements in confinement and stability of FRC plasmas have led to further improved fast-ion build up; thereby, an advanced beam-driven FRC state has been produced and sustained for up to 5 + ms (longer than all characteristic system time scales), only limited by hardware and electric supply constraints such as NB and plasma-gun power supplies. To further improve the FRC performance the C-2U device is being replaced by C-2W featuring higher injected NB power, longer pulse duration as well as enhanced edge-biasing systems and substantially upgraded divertors. Main C-2U experimental results and key features of C-2W will be presented. Tri Alpha Energy, Inc.

  20. An Overview of Cultural Competency Curricula in ACGME-accredited General Surgery Residency Programs.

    Science.gov (United States)

    Shah, Sagar S; Sapigao, Francisco B; Chun, Maria B J

    Cultural competency(CC) in surgical residency curricula is not the novel idea it was fourteen years ago when the ACGME challenged program directors to teach and assess six core competencies. CC is recognized as a component of "patient care", "professionalism", and "interpersonal and communication skills." The results of five programs (2004-2012) with CC curricula were identified in a 2013 paper by Ly and Chun. The primary objective of this paper is to provide the current status of CC curricula in general surgery residency programs. Three sources were used for this study. First, a four question survey on the current status of CC education was sent to program directors of ACGME-accredited surgery residency programs. Second, the lead authors from five programs previously reported in the 2013 paper were interviewed. Third, the survey mentioned above was resent to 52 residency programs who implemented New York University's (NYU) SPICE program, which has a CC component. Participants for the survey consisted of program directors of ACGME-accredited surgery residency programs. The interviews were conducted with the corresponding authors from the previous study by Ly and Chun. Of the 256 surveyed, nine responded; seven stated that CC is not taught formally at their institution while four stated that they do not feel any part of CC curricula is missing from their program. Due to the low response rate, we identified and conducted interviews with general surgery residency programs with CC curricula. Of the five programs contacted, only three remain active and utilize Objective Structured Clinical Examinations (OSCEs) to teach cultural competency. One of the three, the SPICE program at NYU, has expanded to 52 other residency programs in the US. Although the importance of CC has been identified in general surgery, formal curricula and documentation of implementation remains elusive. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All

  1. An Overview of HATS: A Language Independent High Assurance Transformation System

    Energy Technology Data Exchange (ETDEWEB)

    Winter, V.L.

    1998-10-16

    Transformations that are based on syntax directed rewriting systems can have a significant impact on the construction of high assurance systems. However, in order for a transformational approach to be useful to a particular problem domain, a (general) transformation system must be adapted to the notation of that particular domain. A transformation system that can be easily adapted to various domain notations has the potential of having a wide range of applicability. In this paper we dissus why transforrmtion is attractive horn a high assurance perspective, as well as some issues surrounding automated transformation within specific problem domains. We then give an overview of a language independent High Assurance Transformation System (HATS) that is being developed at Sandia National Laboratories.

  2. Overview of the CANDU fuel handling system for advanced fuel cycles

    International Nuclear Information System (INIS)

    Koivisto, D.J.; Brown, D.R.

    1997-01-01

    Because of its neutron economies and on-power re-fuelling capabilities the CANDU system is ideally suited for implementing advanced fuel cycles because it can be adapted to burn these alternative fuels without major changes to the reactor. The fuel handling system is adaptable to implement advanced fuel cycles with some minor changes. Each individual advanced fuel cycle imposes some new set of special requirements on the fuel handling system that is different from the requirements usually encountered in handling the traditional natural uranium fuel. These changes are minor from an overall plant point of view but will require some interesting design and operating changes to the fuel handling system. Some preliminary conceptual design has been done on the fuel handling system in support of these fuel cycles. Some fuel handling details were studies in depth for some of the advanced fuel cycles. This paper provides an overview of the concepts and design challenges. (author)

  3. Program status 3. quarter -- FY 1990: Confinement systems programs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-07-24

    Highlights of the DIII-D Research Operations task are: completed five weeks tokamak operations; initiated summer vent; achievement of 10.7% beta; carried out first dimensionless transport scaling experiment; completed IBW program; demonstrated divertor heat reduction with gas puffing; field task proposals presented to OFE; presentation of DIII-D program to FPAC; made presentation to Admiral Watkins; and SAN safety review. Summaries are given on research programs, operations, program development, hardware development, operations support and collaborative efforts. Brief summaries of progress on the International Cooperation task include: TORE SUPRA, ASDEX, JFT-2M, and JET. Funding for work on CIT physics was received this quarter. Several physics R and D planning tasks were initiated. Earlier in FY90, a poloidal field coil shaping system (PFC) was found for DIGNITOR. This quarter more detailed analysis has been done to optimize the design of the PFC system.

  4. The Air Program Information Management System (APIMS)

    Science.gov (United States)

    2011-11-02

    Technology November 2, 2011 The Air Program Information Management System (APIMS) Frank Castaneda, III, P.E. APIMS Program Manager AFCEE/TDNQ APIMS...NOV 2011 2. REPORT TYPE 3. DATES COVERED 00-00-2011 to 00-00-2011 4. TITLE AND SUBTITLE The Air Program Information Management System (APIMS... Information   Management   System : Sustainability of  Enterprise air quality management system • Aspects and Impacts to Process • Auditing and Measurement

  5. Overview of the U.S. inspection capability demonstration program for CRDM penetrations

    International Nuclear Information System (INIS)

    Melton, M.; Whitaker, D.; Ammirato, F.; Pathania, R.

    1994-01-01

    The US PWR Owners have developed a coordinated program to demonstrate the effectiveness of procedures for inspection of the Control Rod Drive Mechanism (CRDM) nozzle penetrations. The purpose of the inspections is to detect inside surface Primary Water Stress Corrosion Cracking (PWSCC). Reactor vessel manufacturers, PWR Owners Groups, and EPRI are participating in this cooperative program. Flaw detection, sizing, and location capability will be assessed in the program using realistic full-scale mockups containing intentional defects. The program is expected to be completed by January 1, 1994 and be available for qualification work at that time. The demonstration program is scheduled to become operational in 1993 to support 1994 and future inspections

  6. Boolean modeling in systems biology: an overview of methodology and applications

    International Nuclear Information System (INIS)

    Wang, Rui-Sheng; Albert, Réka; Saadatpour, Assieh

    2012-01-01

    Mathematical modeling of biological processes provides deep insights into complex cellular systems. While quantitative and continuous models such as differential equations have been widely used, their use is obstructed in systems wherein the knowledge of mechanistic details and kinetic parameters is scarce. On the other hand, a wealth of molecular level qualitative data on individual components and interactions can be obtained from the experimental literature and high-throughput technologies, making qualitative approaches such as Boolean network modeling extremely useful. In this paper, we build on our research to provide a methodology overview of Boolean modeling in systems biology, including Boolean dynamic modeling of cellular networks, attractor analysis of Boolean dynamic models, as well as inferring biological regulatory mechanisms from high-throughput data using Boolean models. We finally demonstrate how Boolean models can be applied to perform the structural analysis of cellular networks. This overview aims to acquaint life science researchers with the basic steps of Boolean modeling and its applications in several areas of systems biology. (paper)

  7. Advancing Earth System Science using Quantified Objectives: An Overview of the NRC Recommended Value Framework

    Science.gov (United States)

    Friedl, R.

    2016-12-01

    The successful application of the value-based framework recommended in the recent National Academy study to measurement prioritization depends, first and foremost, on the establishment of an adequate working definition of an Earth science "objective". The sought-after definition should readily lend itself to formulation of quantified objectives for use in advancing observations of the Earth system. This presentation will provide an overview of the National Academy study on measurement continuity with particular emphasis on the committee's perspective on overcoming the challenges of establishing useful quantified objectives.

  8. Overview of system of accounting and control of nuclear materials in Belarus and its development perspectives

    International Nuclear Information System (INIS)

    Sudakou, I.

    1999-01-01

    This paper presents a brief overview of technical and software means involved in the system of accounting and control of nuclear materials (SSAC) in the Republic of Belarus. The existing SSAC and its main components are described, namely legal framework, requirements for accounting and control at the facility level, and reporting procedures. Further development of the SSAC is outlined along such lines as improvement of accounting information processing, measuring capabilities, training of personnel, upgrading of regulatory practice, and strengthening of international co-operation. The 2000 year problem concerning the SSAC is briefly addressed. (author)

  9. A critical overview of industrial energy decoupling programs in six developing countries in Asia

    International Nuclear Information System (INIS)

    Luken, Ralph A.; Piras, Stefano

    2011-01-01

    In reviewing the journal literature on the decoupling of energy use and industrial output in the Asian region, particularly with respect to developing countries, we found little information about most country programs other than for China and India and only one article that compared the programs of these two countries. For this reason, we used diverse sources to identify the key programmatic features that have contributed, but clearly are not totally responsible for, decoupling achievements of two countries ( China and Thailand) and then, on the basis of these findings, reviewed emerging industrial energy decoupling programs in four other countries (India, Indonesia, Malaysia and Vietnam). We found that the design of the two successful on-going decoupling programs have common features, which are setting an explicit target for decoupling of energy use and industrial output, a government program that offers financial incentives and imposes specific auditing and reporting requirements and involvement of the manufacturing sector in designing and implementing targets as they apply to individual enterprises. We also found that the emerging programs in the other four countries lack some or all of these essential programmatic features. - Highlights: → We reviewed two on-going and four emerging industrial energy decoupling programs. → These six Asian developing countries have very different rates of decoupling. → The two successful on-going programs share three common features. → These are quantitative targets, supportive programs and industry involvement. → The four emerging programs lack some or all of these features.

  10. Overview of Risk Mitigation for Safety-Critical Computer-Based Systems

    Science.gov (United States)

    Torres-Pomales, Wilfredo

    2015-01-01

    This report presents a high-level overview of a general strategy to mitigate the risks from threats to safety-critical computer-based systems. In this context, a safety threat is a process or phenomenon that can cause operational safety hazards in the form of computational system failures. This report is intended to provide insight into the safety-risk mitigation problem and the characteristics of potential solutions. The limitations of the general risk mitigation strategy are discussed and some options to overcome these limitations are provided. This work is part of an ongoing effort to enable well-founded assurance of safety-related properties of complex safety-critical computer-based aircraft systems by developing an effective capability to model and reason about the safety implications of system requirements and design.

  11. Programming models for energy-aware systems

    Science.gov (United States)

    Zhu, Haitao

    Energy efficiency is an important goal of modern computing, with direct impact on system operational cost, reliability, usability and environmental sustainability. This dissertation describes the design and implementation of two innovative programming languages for constructing energy-aware systems. First, it introduces ET, a strongly typed programming language to promote and facilitate energy-aware programming, with a novel type system design called Energy Types. Energy Types is built upon a key insight into today's energy-efficient systems and applications: despite the popular perception that energy and power can only be described in joules and watts, real-world energy management is often based on discrete phases and modes, which in turn can be reasoned about by type systems very effectively. A phase characterizes a distinct pattern of program workload, and a mode represents an energy state the program is expected to execute in. Energy Types is designed to reason about energy phases and energy modes, bringing programmers into the optimization of energy management. Second, the dissertation develops Eco, an energy-aware programming language centering around sustainability. A sustainable program built from Eco is able to adaptively adjusts its own behaviors to stay on a given energy budget, avoiding both deficit that would lead to battery drain or CPU overheating, and surplus that could have been used to improve the quality of the program output. Sustainability is viewed as a form of supply and demand matching, and a sustainable program consistently maintains the equilibrium between supply and demand. ET is implemented as a prototyped compiler for smartphone programming on Android, and Eco is implemented as a minimal extension to Java. Programming practices and benchmarking experiments in these two new languages showed that ET can lead to significant energy savings for Android Apps and Eco can efficiently promote battery awareness and temperature awareness in real

  12. Overview of the performances of PMMA-SI-POF communication systems

    Science.gov (United States)

    Straullu, Stefano; Abrate, Silvio

    2013-01-01

    Poly-Methyl-MethAcrilate based optical fibers with Step-Index profile and 1 mm core diameter (PMMA-SI-POF) are widely deployed in automobile infotainment systems thanks to the MOST standards that adopt them as the preferred physical medium. However, thanks to their mechanical robustness and tolerance and their ease of installation, they make a suitable medium for local networking. Unfortunately, their good mechanical characteristics have to be paid in terms of performances, since PMMA-SI-POF based systems are severely limited in both bandwidth and attenuation. We will present a review of the best research results that have been obtained at the different speeds that are defined by the Ethernet standard: 10 Mb/s, 100 Mb/s and 1 Gb/s, showing that PMMA-SI-POF can easily overcome copper performances while being smaller, cheaper, easier to install in brownfield environment. To date, the following results have been obtained: 425 m at 10 Mb/s, 275 m at 100 Mb/s and 75 m at 1 Gb/s; these results have been obtained with commercial eye-safe components, and we believe that overcoming them requires in most cases the development of a new class of components. An overview of the different modulation formats that have been adopted, the most suitable equalization techniques and the best affordable components will be given. In the end, an overview of the current commercial systems performances and the road standardization procedures are taking will be given.

  13. Program definition and assessment overview. [for thermal energy storage project management

    Science.gov (United States)

    Gordon, L. H.

    1980-01-01

    The implementation of a program level assessment of thermal energy storage technology thrusts for the near and far term to assure overall coherent energy storage program is considered. The identification and definition of potential thermal energy storage applications, definition of technology requirements, and appropriate market sectors are discussed along with the necessary coordination, planning, and preparation associated with program reviews, workshops, multi-year plans and annual operating plans for the major laboratory tasks.

  14. Compact Hyperspectral Imaging System (cosi) for Small Remotely Piloted Aircraft Systems (rpas) - System Overview and First Performance Evaluation Results

    Science.gov (United States)

    Sima, A. A.; Baeck, P.; Nuyts, D.; Delalieux, S.; Livens, S.; Blommaert, J.; Delauré, B.; Boonen, M.

    2016-06-01

    This paper gives an overview of the new COmpact hyperSpectral Imaging (COSI) system recently developed at the Flemish Institute for Technological Research (VITO, Belgium) and suitable for remotely piloted aircraft systems. A hyperspectral dataset captured from a multirotor platform over a strawberry field is presented and explored in order to assess spectral bands co-registration quality. Thanks to application of line based interference filters deposited directly on the detector wafer the COSI camera is compact and lightweight (total mass of 500g), and captures 72 narrow (FWHM: 5nm to 10 nm) bands in the spectral range of 600-900 nm. Covering the region of red edge (680 nm to 730 nm) allows for deriving plant chlorophyll content, biomass and hydric status indicators, making the camera suitable for agriculture purposes. Additionally to the orthorectified hypercube digital terrain model can be derived enabling various analyses requiring object height, e.g. plant height in vegetation growth monitoring. Geometric data quality assessment proves that the COSI camera and the dedicated data processing chain are capable to deliver very high resolution data (centimetre level) where spectral information can be correctly derived. Obtained results are comparable or better than results reported in similar studies for an alternative system based on the Fabry-Pérot interferometer.

  15. COMPACT HYPERSPECTRAL IMAGING SYSTEM (COSI FOR SMALL REMOTELY PILOTED AIRCRAFT SYSTEMS (RPAS – SYSTEM OVERVIEW AND FIRST PERFORMANCE EVALUATION RESULTS

    Directory of Open Access Journals (Sweden)

    A. A. Sima

    2016-06-01

    Full Text Available This paper gives an overview of the new COmpact hyperSpectral Imaging (COSI system recently developed at the Flemish Institute for Technological Research (VITO, Belgium and suitable for remotely piloted aircraft systems. A hyperspectral dataset captured from a multirotor platform over a strawberry field is presented and explored in order to assess spectral bands co-registration quality. Thanks to application of line based interference filters deposited directly on the detector wafer the COSI camera is compact and lightweight (total mass of 500g, and captures 72 narrow (FWHM: 5nm to 10 nm bands in the spectral range of 600-900 nm. Covering the region of red edge (680 nm to 730 nm allows for deriving plant chlorophyll content, biomass and hydric status indicators, making the camera suitable for agriculture purposes. Additionally to the orthorectified hypercube digital terrain model can be derived enabling various analyses requiring object height, e.g. plant height in vegetation growth monitoring. Geometric data quality assessment proves that the COSI camera and the dedicated data processing chain are capable to deliver very high resolution data (centimetre level where spectral information can be correctly derived. Obtained results are comparable or better than results reported in similar studies for an alternative system based on the Fabry–Pérot interferometer.

  16. Environmental Restoration Program Control Management System

    International Nuclear Information System (INIS)

    Duke, R.T.

    1992-01-01

    Environmental Restoration managers need to demonstrate that their programs are under control. Unlike most industrial programs, the public is heavily involved in Environmental Restoration activities. The public is demanding that the country prove that real progress is being made towards cleaning up the environment. A Program Control Management System can fill this need. It provides a structure for planning, work authorization, data accumulation, data analysis and change control. But it takes time to implement a control system and the public is losing its patience. This paper describes critical items essential to the quick development and implementation of a successful control system

  17. Two programs two differing systems

    International Nuclear Information System (INIS)

    Beard, J.; Ireland, L.; Robb, B.; Brown, P.

    1999-01-01

    This paper is the result of the first evaluation of the Donor Tissue Bank of Victoria's (DTBV) approaches to families to offer the option of tissue donation. The DTBV has pioneered a new and developing community health service resulting in the provision of 2,318 allografts to surgeons throughout Australia from January 1994 to December 1997. Based within the Coronial Services Centre, the DTBV experience is with families associated with reportable deaths. The location of the program within a Coronial Centre is a significant feature and leads to a range of unique practice differences compared to a hospital donation/transplantation program. However there is a paucity of literature about tissue donation from cadaveric donor apart from what is known about organ donation, with most studies treating tissue and organ donation as the same. Thus ensuring differences between tissue donation and organ donation have not been articulated and to some extent have not been realised. The DTBV is the only tissue bank in Australia, which has been set up as part of Coronial Services. The DTBV was established in 1989 to provide a central facility for the acquisition, processing, storage and distribution of tissue for transplantation. Making a donation to a tissue bank does not have the same sense of immediacy as organ donation to a recipient. Tissue donation is not necessarily life-saving, but is it always life-enhancing. Whilst there are overlaps between hospital based programs and the DTBV program, significant differences exist. In this developing and unique area of practice, the role and functions of the transplant coordinators demands skills across two differing paradigms, the physical/biological sciences and the social sciences. The demands of meeting the requirements of both paradigms as central to many of the challenges and tensions in the Transplant Coordinator's work. The primary purpose of the evaluation was to describe, analyse and theorise the practice of the transplant

  18. Delivery arrangements for health systems in low-income countries: an overview of systematic reviews

    Science.gov (United States)

    Ciapponi, Agustín; Lewin, Simon; Herrera, Cristian A; Opiyo, Newton; Pantoja, Tomas; Paulsen, Elizabeth; Rada, Gabriel; Wiysonge, Charles S; Bastías, Gabriel; Dudley, Lilian; Flottorp, Signe; Gagnon, Marie-Pierre; Garcia Marti, Sebastian; Glenton, Claire; Okwundu, Charles I; Peñaloza, Blanca; Suleman, Fatima; Oxman, Andrew D

    2017-01-01

    Background Delivery arrangements include changes in who receives care and when, who provides care, the working conditions of those who provide care, coordination of care amongst different providers, where care is provided, the use of information and communication technology to deliver care, and quality and safety systems. How services are delivered can have impacts on the effectiveness, efficiency and equity of health systems. This broad overview of the findings of systematic reviews can help policymakers and other stakeholders identify strategies for addressing problems and improve the delivery of services. Objectives To provide an overview of the available evidence from up-to-date systematic reviews about the effects of delivery arrangements for health systems in low-income countries. Secondary objectives include identifying needs and priorities for future evaluations and systematic reviews on delivery arrangements and informing refinements of the framework for delivery arrangements outlined in the review. Methods We searched Health Systems Evidence in November 2010 and PDQ-Evidence up to 17 December 2016 for systematic reviews. We did not apply any date, language or publication status limitations in the searches. We included well-conducted systematic reviews of studies that assessed the effects of delivery arrangements on patient outcomes (health and health behaviours), the quality or utilisation of healthcare services, resource use, healthcare provider outcomes (such as sick leave), or social outcomes (such as poverty or employment) and that were published after April 2005. We excluded reviews with limitations important enough to compromise the reliability of the findings. Two overview authors independently screened reviews, extracted data, and assessed the certainty of evidence using GRADE. We prepared SUPPORT Summaries for eligible reviews, including key messages, 'Summary of findings' tables (using GRADE to assess the certainty of the evidence), and

  19. Early childhood programs and the education system.

    Science.gov (United States)

    Beach, Jane; Bertrand, Jane

    2009-12-01

    Policy makers, advocates and experts agree that the current delivery of early childhood development programs is fragmented. Many point to the education system as a better alternative for a more coherent approach that has the necessary infrastructure in place in communities, and is well placed to meet the needs of all young children and their families. In other jurisdictions, early childhood development programs have moved into education. In Canada, provincial and local school authorities are taking on more early childhood programs.

  20. NASA's Radioisotope Power Systems Program Status

    Science.gov (United States)

    Dudzinski, Leonard A.; Hamley, John A.; McCallum, Peter W.; Sutliff, Thomas J.; Zakrajsek, June F.

    2013-01-01

    NASA's Radioisotope Power Systems (RPS) Program began formal implementation in December 2010. The RPS Program's goal is to make available RPS for the exploration of the solar system in environments where conventional solar or chemical power generation is impractical or impossible to meet mission needs. To meet this goal, the RPS Program manages investments in RPS system development and RPS technologies. The current keystone of the RPS Program is the development of the Advanced Stirling Radioisotope Generator (ASRG). This generator will be about four times more efficient than the more traditional thermoelectric generators, while providing a similar amount of power. This paper provides the status of the RPS Program and its related projects. Opportunities for RPS generator development and targeted research into RPS component performance enhancements, as well as constraints dealing with the supply of radioisotope fuel, are also discussed in the context of the next ten years of planetary science mission plans.

  1. U.S. Army Corps of Engineers Hazardous, Toxic and Radioactive Waste (HTRW) program overview

    International Nuclear Information System (INIS)

    Ohnstad, D.L.

    1994-01-01

    The purpose of this presentation is an overview of the US Army Corps of Engineers role in the cleanup of this country's Hazardous, Toxic and Radioactive Waste sites. To many outside of the agency, the Corps organizational structure is complex. This presentation presents the Corps team members for both Civil (Superfund and support for other agencies) and Military cleanups. Over the last 12 years, the role of the Corps in Hazardous, Toxic and Radioactive Waste cleanup has been evolving. This emerging role is discussed, with emphasis on where the Corp's current responsibilities are focused. Corps mission and non-mission assignments are discussed along with the Corps policy of limited decentralization for project execution

  2. Overview of the U.S. Cattle Fever Tick Eradication Program: History and Challenges

    Science.gov (United States)

    The Cattle Fever Tick Eradication Program (CFTEP) carried out by the Veterinary Services (VS) branch of the U.S. Department of Agriculture (USDA), Animal and Plant Health Inspection Service (APHIS) has been in continuous operation for 106 years. Through the efforts of this program cattle fever ticks...

  3. An Overview of a Peer Health Education Program at a Student Health Service.

    Science.gov (United States)

    White, Sabina A.

    1994-01-01

    The article describes the Peer Health Education (PHE) programs of the University of California at Santa Barbara Student Health Service. The PHE programs involve training and placement components and focus on relationships, nutrition, eating disorders, stress and laughter, alcohol/drug responsibility, cold care, sexuality, leadership, blood…

  4. Material control system simulator program reference manual

    International Nuclear Information System (INIS)

    Hollstien, R.B.

    1978-01-01

    A description is presented of a Material Control System Simulator (MCSS) program for determination of material accounting uncertainty and system response to particular adversary action sequences that constitute plausible material diversion attempts. The program is intended for use in situations where randomness, uncertainty, or interaction of adversary actions and material control system components make it difficult to assess safeguards effectiveness against particular material diversion attempts. Although MCSS may be used independently in the design or analysis of material handling and processing systems, it has been tailored toward the determination of material accountability and the response of material control systems to adversary action sequences

  5. Material control system simulator program reference manual

    Energy Technology Data Exchange (ETDEWEB)

    Hollstien, R.B.

    1978-01-24

    A description is presented of a Material Control System Simulator (MCSS) program for determination of material accounting uncertainty and system response to particular adversary action sequences that constitute plausible material diversion attempts. The program is intended for use in situations where randomness, uncertainty, or interaction of adversary actions and material control system components make it difficult to assess safeguards effectiveness against particular material diversion attempts. Although MCSS may be used independently in the design or analysis of material handling and processing systems, it has been tailored toward the determination of material accountability and the response of material control systems to adversary action sequences.

  6. Integrated Worker Health Protection and Promotion Programs: Overview and Perspectives on Health and Economic Outcomes

    Science.gov (United States)

    Pronk, Nicolaas P.

    2014-01-01

    Objective To describe integrated worker health protection and promotion (IWHPP) program characteristics, to discuss the rationale for integration of OSH and WHP programs, and to summarize what is known about the impact of these programs on health and economic outcomes. Methods A descriptive assessment of the current state of the IWHPP field and a review of studies on the effectiveness of IWHPP programs on health and economic outcomes. Results Sufficient evidence of effectiveness was found for IWHPP programs when health outcomes are considered. Impact on productivity-related outcomes is considered promising, but inconclusive, whereas insufficient evidence was found for health care expenditures. Conclusions Existing evidence supports an integrated approach in terms of health outcomes but will benefit significantly from research designed to support the business case for employers of various company sizes and industry types. PMID:24284747

  7. Overview of Maximum Power Point Tracking Techniques for Photovoltaic Energy Production Systems

    DEFF Research Database (Denmark)

    Koutroulis, Eftichios; Blaabjerg, Frede

    2015-01-01

    of photovoltaic sources during stochastically varying solar irradiation and ambient temperature conditions. Thus, the overall efficiency of the photovoltaic energy production system is increased. Numerous techniques have been presented during the last decade for implementing the maximum power point tracking......A substantial growth of the installed photovoltaic systems capacity has occurred around the world during the last decade, thus enhancing the availability of electric energy in an environmentally friendly way. The maximum power point tracking technique enables maximization of the energy production...... process in a photovoltaic system. This article provides an overview of the operating principles of these techniques, which are suited for either uniform or non-uniform solar irradiation conditions. The operational characteristics and implementation requirements of these maximum power point tracking...

  8. Boeing Crew Exploration Vehicle Environmental Control and Life Support System Architecture Overview

    Science.gov (United States)

    Saiidi, Mo; Lewis, John F.

    2007-01-01

    The Boeing Company under the teaming agreement with the Northrop Grumman Systems Corporation and in compliance with the NASA Phase 1 contract, had the responsibilities for the CEV architecture development of the Environmental control and life support (ECLS) system under the NASA Phase 1 contract. The ECLS system was comprised of the various subsystems which provided for a shirt-sleeve habitable environment for crew to live and work in the crew module of the CEV. This architecture met the NASA requirements to ferry cargo and crew to ISS, and Lunar sortie missions, with extensibility to long duration missions to Moon and MARS. This paper provides a summary overview of the CEV ECLS subsystems which was proposed in compliance with the contract activities.

  9. Overview of Maximum Power Point Tracking Techniques for Photovoltaic Energy Production Systems

    DEFF Research Database (Denmark)

    Koutroulis, Eftichios; Blaabjerg, Frede

    2017-01-01

    A substantial growth of the installed photovoltaic (PV) systems capacity has occurred around the world during the last decade, thus enhancing the availability of electric energy in an environmentally friendly way. The maximum power point tracking (MPPT) technique enables to maximize the energy...... production of PV sources, despite the stochastically varying solar irradiation and ambient temperature conditions. Thereby, the overall efficiency of the PV energy production system is increased. Numerous techniques have been presented during the last decades for implementing the MPPT process in a PV system....... This chapter provides an overview of the operating principles of these techniques, which are suited for either uniform or nonuniform solar irradiation conditions. The operational characteristics and implementation requirements of these MPPT methods are also analyzed in order to demonstrate their performance...

  10. Overview of Maximum Power Point Tracking Techniques for Photovoltaic Energy Production Systems

    DEFF Research Database (Denmark)

    Koutroulis, Eftichios; Blaabjerg, Frede

    2017-01-01

    production of PV sources, despite the stochastically varying solar irradiation and ambient temperature conditions. Thereby, the overall efficiency of the PV energy production system is increased. Numerous techniques have been presented during the last decades for implementing the MPPT process in a PV system......A substantial growth of the installed photovoltaic (PV) systems capacity has occurred around the world during the last decade, thus enhancing the availability of electric energy in an environmentally friendly way. The maximum power point tracking (MPPT) technique enables to maximize the energy....... This chapter provides an overview of the operating principles of these techniques, which are suited for either uniform or nonuniform solar irradiation conditions. The operational characteristics and implementation requirements of these MPPT methods are also analyzed in order to demonstrate their performance...

  11. Rapid transit system noise abatement program

    Science.gov (United States)

    1972-01-01

    This program plan describes a broad program for the reduction of noise and vibration in rapid transit systems, which impacts the patrons and inhabitants of the nearby commuity. An UMTA/TSC survey has provided data on the most urgent needs and state-o...

  12. A Transformation System for Modular CLP Programs

    NARCIS (Netherlands)

    Etalle, Sandro; Sterling, Leon S.; Gabbrielli, Maurizio

    1995-01-01

    We propose a transformation system for CLP programs and modules. The framework is inspired by the one of Tamaki and Sato for pure logic programs [19]. Here, the use of CLP allows us to introduce some new operations such as splitting and constraint replacement. We provide two sets of applicability

  13. Beyond Widgets -- Systems Incentive Programs for Utilities

    Energy Technology Data Exchange (ETDEWEB)

    Regnier, Cindy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Mathew, Paul [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Robinson, Alastair [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schwartz, Peter [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Walter, Travis [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-08-15

    Utility incentive programs remain one of the most significant means of deploying commercialized, but underutilized building technologies to scale. However, these programs have been largely limited to component-based products (e.g., lamps, RTUs). While some utilities do provide ‘custom’ incentive programs with whole building and system level technical assistance, these programs require deeper levels of analysis, resulting in higher program costs. This results in custom programs being restricted to utilities with greater resources, and are typically applied mainly to large or energy-intensive facilities, leaving much of the market without cost effective access and incentives for these solutions. In addition, with increasingly stringent energy codes, cost effective component-based solutions that achieve significant savings are dwindling. Building systems (e.g., integrated façade, HVAC and/or lighting solutions) can deliver higher savings that translate into large sector-wide savings if deployed at the scale of these programs. However, systems application poses a number of challenges – baseline energy use must be defined and measured; the metrics for energy and performance must be defined and tested against; in addition, system savings must be validated under well understood conditions. This paper presents a sample of findings of a project to develop validated utility incentive program packages for three specific integrated building systems, in collaboration with Xcel Energy (CO, MN), ComEd, and a consortium of California Public Owned Utilities (CA POUs) (Northern California Power Agency(NCPA) and the Southern California Public Power Authority(SCPPA)). Furthermore, these program packages consist of system specifications, system performance, M&V protocols, streamlined assessment methods, market assessment and implementation guidance.

  14. Overview of Evaluation Methods for R&D Programs. A Directory of Evaluation Methods Relevant to Technology Development Programs

    Energy Technology Data Exchange (ETDEWEB)

    Ruegg, Rosalie [TIA Consulting, Inc., Emeral Isle, NC (United States); Jordan, Gretchen B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2007-03-01

    This document provides guidance for evaluators who conduct impact assessments to determine the “realized” economic benefits and costs, energy, environmental benefits, and other impacts of the Office of Energy Efficiency and Renewable Energy’s (EERE) R&D programs. The focus of this Guide is on realized outcomes or impacts of R&D programs actually experienced by American citizens, industry, and others.

  15. SDDOT transportation systems management & operations program plan.

    Science.gov (United States)

    2016-06-01

    The objective of this project is the development of a comprehensive Transportation Systems Management and : Operations (TSM&O) Program Plan for the South Dakota Department of Transportation. This plan guides : business planning and strategic decision...

  16. The RMS program system and database

    International Nuclear Information System (INIS)

    Fisher, S.M.; Peach, K.J.

    1982-08-01

    This report describes the program system developed for the data reduction and analysis of data obtained with the Rutherford Multiparticle Spectrometer (RMS), with particular emphasis on the utility of a well structured central data-base. (author)

  17. Optimization Program for Drinking Water Systems

    Science.gov (United States)

    The Area-Wide Optimization Program (AWOP) provides tools and approaches for drinking water systems to meet water quality optimization goals and provide an increased – and sustainable – level of public health protection to their consumers.

  18. Governance arrangements for health systems in low-income countries: an overview of systematic reviews.

    Science.gov (United States)

    Herrera, Cristian A; Lewin, Simon; Paulsen, Elizabeth; Ciapponi, Agustín; Opiyo, Newton; Pantoja, Tomas; Rada, Gabriel; Wiysonge, Charles S; Bastías, Gabriel; Garcia Marti, Sebastian; Okwundu, Charles I; Peñaloza, Blanca; Oxman, Andrew D

    2017-09-12

    Governance arrangements include changes in rules or processes that determine authority and accountability for health policies, organisations, commercial products and health professionals, as well as the involvement of stakeholders in decision-making. Changes in governance arrangements can affect health and related goals in numerous ways, generally through changes in authority, accountability, openness, participation and coherence. A broad overview of the findings of systematic reviews can help policymakers, their technical support staff and other stakeholders to identify strategies for addressing problems and improving the governance of their health systems. To provide an overview of the available evidence from up-to-date systematic reviews about the effects of governance arrangements for health systems in low-income countries. Secondary objectives include identifying needs and priorities for future evaluations and systematic reviews on governance arrangements and informing refinements of the framework for governance arrangements outlined in the overview. We searched Health Systems Evidence in November 2010 and PDQ Evidence up to 17 December 2016 for systematic reviews. We did not apply any date, language or publication status limitations in the searches. We included well-conducted systematic reviews of studies that assessed the effects of governance arrangements on patient outcomes (health and health behaviours), the quality or utilisation of healthcare services, resource use (health expenditures, healthcare provider costs, out-of-pocket payments, cost-effectiveness), healthcare provider outcomes (such as sick leave), or social outcomes (such as poverty, employment) and that were published after April 2005. We excluded reviews with limitations that were important enough to compromise the reliability of the findings of the review. Two overview authors independently screened reviews, extracted data and assessed the certainty of evidence using GRADE. We prepared

  19. Interdependencies and reliability in the combined ICT and power system: An overview of current research

    Directory of Open Access Journals (Sweden)

    Inger Anne Tøndel

    2018-01-01

    Full Text Available The smart grid vision implies extensive use of ICT in the power system, enabling increased flexibility and functionality and thereby meeting future demands and strategic goals. Consequently, power system reliability will increasingly depend on ICT components and systems. While adding functionality, ICT systems also contribute to failures, such as hidden failures in protection systems, as has been exemplified by recent power outages. It also brings new threats, such as that of cyber-attacks. To ensure effective power system reliability, the interdependencies between power and ICT systems need to be properly understood. This paper provides an overview of main interdependency categories, as well as methods that can be used to identify and study interdependencies. Based on a study of recent papers in major archival journals, we conclude that appropriate methods for identification of interdependencies between power and ICT systems seem to be lacking. In addition, current methods seem unable to both cover the power system at large, and at the same time take into account the full array of intentional and accidental threats. Based on these findings, we make recommendations for future research in this field.

  20. CO2 Injectivity in Geological Storages: an Overview of Program and Results of the GeoCarbone-Injectivity Project

    International Nuclear Information System (INIS)

    Lombard, J.M.; Egermann, P.; Azaroual, M.; Pironon, J.; Broseta, D.; Egermann, P.; Munier, G.; Mouronval, G.

    2010-01-01

    The objective of the GeoCarbone-Injectivity project was to develop a methodology to study the complex phenomena involved in the near well bore region during CO 2 injection. This paper presents an overview of the program and results of the project, and some further necessary developments. The proposed methodology is based on experiments and simulations at the core scale, in order to understand (physical modelling and definition of constitutive laws) and quantify (calibration of simulation tools) the mechanisms involved in injectivity variations: fluid/rock interactions, transport mechanisms, geomechanical effects. These mechanisms and the associated parameters have then to be integrated in the models at the well bore scale. The methodology has been applied for the study of a potential injection of CO 2 in the Dogger geological formation of the Paris Basin, in collaboration with the other ANR GeoCarbone projects. (authors)

  1. An Overview of the Experimental 50-cm Laser Ramjet (X-50LR) Program (Postprint)

    National Research Council Canada - National Science Library

    Mead, Jr., Franklin B; Larson, C. W; Knecht, Sean D

    2005-01-01

    In January 2001, the X-50LR program was initiated to scale the Lightcraft concept ultimately to a 50-cm focal diameter, and to launch a 50 cm, fully functional vehicle, into space in either a sounding...

  2. An Overview of the Experimental 50-cm Laser Ramjet (X-50LR) Program

    National Research Council Canada - National Science Library

    Mead, Jr., Franklin B; Larson, C. W; Knecht, Sean D

    2005-01-01

    In January 2001, the X-50LR program was initiated to scale the Lightcraft concept ultimately to a 50-cm focal diameter, and to launch a 50 cm, fully functional vehicle, into space in either a sounding...

  3. The Idaho Power Burst Facility/Boron Neutron Capture Therapy (PBF/BNCT) Program overview

    International Nuclear Information System (INIS)

    Dorn, R.V. III; Griebenow, M.L.; Ackermann, A.L.; Miller, L.G.; Miller, D.L.; Wheeler, F.J.; Bradshaw, K.M.; Wessol, D.E.; Harker, Y.D.; Nigg, D.W.; Randolph, P.D.; Bauer, W.F.; Gavin, P.R.; Richards, T.L.

    1992-01-01

    The Power Burst Facility/Boron Neutron Capture Therapy (PBF/BNCT) Program has been funded since 1988 to evaluate brain tumor treatment using Na 2 B 12 H 11 SH (borocaptate sodium or BSH) and epithermal neutrons. The PBF/BNCT Program pursues this goal as a comprehensive, multidisciplinary, multiorganizational endeavor applying modern program management techniques. The initial focus was to: (1) establish a representative large animal model and (2) develop the generic analytical and measurement capabilities require to control treatment repeatability and determine critical treatment parameters independent of tumor type and body location. This paper will identify the PBF/BNCT Program elements and summarize the status of some of the developed capabilities

  4. Overview of the TCV tokamak program: scientific progress and facility upgrades

    NARCIS (Netherlands)

    Coda, S.; Ahn, J.; Albanese, R.; Alberti, S.; Alessi, E.; Citrin, J.; Hogeweij, D.; Vijvers, W. A. J.; EUROfusion MST1 Team,; et al.,

    2017-01-01

    The TCV tokamak is augmenting its unique historical capabilities (strong shaping, strong electron heating) with ion heating, additional electron heating compatible with high densities, and variable divertor geometry, in a multifaceted upgrade program designed to broaden its operational range without

  5. An overview of the Indian program related to fast reactor core mechanical behaviour

    International Nuclear Information System (INIS)

    Govindarajan, S.; Bhoje, S.B.; Paranjpe, S.R.

    1984-01-01

    This Indian review paper presents the evolution of the fast breeder program which began with fast breeder test reactor (FBTR) commencing in 1972. The state-of-art in the field of core mechanical behaviour is reviewed

  6. Combating Political Police: An Overview of National Action’s Counterintelligence Program, 1982–1990

    Directory of Open Access Journals (Sweden)

    Troy Whitford

    2013-06-01

    Full Text Available During the mid to late 1980s the radical nationalist group National Action was targeted by domestic intelligence agencies. Known as “Operation Odessa” it was part of Australian Security Intelligence Organisation’s (ASIO program to combat what it saw as a rise in politically motivated violence. ASIO and state police Special Branch officers placed the group under surveillance and sent agents to disrupt meetings and recruit informants. Concurrently, National Action had developed its own counterintelligence program structuring the group in an effort to preserve secrecy, educating its membership in situational awareness and designating a senior member as an intelligence officer. Ultimately National Action counterintelligence program was unable to match the highly resourced government agencies and internal discipline issues meant the group was eventually disbanded. However, National Action’s effort to develop a counterintelligence program provides some examples of what low resourced Issue Motivated Groups are capable of achieving.

  7. Joint Service Chemical and Biological Defense Program FY 08-09 Overview

    Science.gov (United States)

    2007-10-01

    Biological Defense (MEDBIO) CONTRACTORS dynPort vaccine company FREDERICK, MD emergent Biosolutions LANSING, MI cangene corporation WINNIPEG, MANITOBA...army medical research institute of infectious diseases Consolidated Program Locator Map MASSACHUSETTS nctrf wolf coach MICHIGAN emergent Biosolutions

  8. 2017-04-28_W88 ALT 370 Program Overview(OUO).

    Energy Technology Data Exchange (ETDEWEB)

    Daniels, Vonceil

    2017-04-01

    All major program milestones have been met and the program is executing within budget. The ALT 370 program achieved Phase 6.4 authorization in February of this year. Five component Final Design Reviews (FDRs) have been completed, indicating progress in finalizing the design and development phase of the program. A series of ground-based qualification activities have demonstrated that designs are meeting functional requirements. The first fully functional flight test, FCET-53, demonstrated end-to-end performance in normal flight environments in February. Similarly, groundbased nuclear safety and hostile environments testing indicates that the design meets requirements in these stringent environments. The first in a series of hostile blast tests was successfully conducted in April.

  9. The Borrower's Guide to Financing Solar Energy Systems - A Federal Overview

    Energy Technology Data Exchange (ETDEWEB)

    Eiffert, P.

    1999-03-30

    This booklet describes authorized lending programs and loan guarantees provided by Fannie Mae, Freddie Mac and several Federal agencies, including DOE, that consumers and businesses can use to finance solar heat or electric systems and energy efficient mortgages.

  10. Overview of the biomedical and environmental programs at the Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Pfuderer, H.A.; Moody, J.B.

    1981-07-01

    Separate abstracts were prepared for each of the 6 chapters presented by the six divisions involved in the Biomedical and Environmental Sciences Program at Oak Ridge National Laboratory. The introduction is not covered by an abstract and deals with the environmental, health and safety considerations of energy technology decisions, the major initiatives now being taken by these 6 divisions, and recent major accomplishments in the biomedical and environmental science program

  11. Overview of the biomedical and environmental programs at the Oak Ridge National Laboratory. [Lead abstract

    Energy Technology Data Exchange (ETDEWEB)

    Pfuderer, H.A.; Moody, J.B. (comps.)

    1981-07-01

    Separate abstracts were prepared for each of the 6 chapters presented by the six divisions involved in the Biomedical and Environmental Sciences Program at Oak Ridge National Laboratory. The introduction is not covered by an abstract and deals with the environmental, health and safety considerations of energy technology decisions, the major initiatives now being taken by these 6 divisions, and recent major accomplishments in the biomedical and environmental science program. (KRM)

  12. System tests and applications photovoltaic program

    Energy Technology Data Exchange (ETDEWEB)

    1979-05-01

    A summary of all the photovoltaic system tests and application experiments that have been initiated since the start of the US DOE Photovoltaics Program in 1975 is presented. They are organized in the following manner for ease of reference: (1) application experiments: these are independently designed and constructed projects which are funded by DOE; (2) system field tests: projects designed and monitored by the national laboratories involved in the photovoltaic program; (3) exhibits: designed to acquaint the general public to photovoltaics; (4) component field tests: real time endurance testing conducted to monitor module reliability under actual environmental conditions; and (5) test facilities: descriptions of the four national laboratories involved in the photovoltaic program.

  13. Satellite Power System (SPS) Program Summary

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-01

    The joint DOE/NASA SPS program has as its objective to achieve by the end of 1980 an initial understanding of the technical feasibility, economic practicability, and the social and environmental acceptability of the SPS concepts so that recommendations concerning program continuation can be made. The four major study areas include (1) systems definition; (2) environmental assessment; (3) societal assessment; and (4) comparative assessment of alternative energy systems. All the projects on the SPS program are listed and summarized for FY 1978. (WHK)

  14. Another Program Simulates A Modular Manufacturing System

    Science.gov (United States)

    Schroer, Bernard J.; Wang, Jian

    1996-01-01

    SSE5 computer program provides simulation environment for modeling manufacturing systems containing relatively small numbers of stations and operators. Designed to simulate manufacturing of apparel, also used in other manufacturing domains. Valuable for small or medium-size firms, including those lacking expertise to develop detailed mathematical models or have only minimal knowledge in describing manufacturing systems and in analyzing results of simulations on mathematical models. Two other programs available bundled together as SSE (MFS-26245). Each program models slightly different manufacturing scenario. Written in Turbo C v2.0 for IBM PC-series and compatible computers running MS-DOS and successfully compiled using Turbo C++ v3.0.

  15. Overview of DYMCAS, the Y-12 Material Control And Accountability System

    International Nuclear Information System (INIS)

    Alspaugh, D. H.

    2001-01-01

    This paper gives an overview of DYMCAS, the material control and accountability information system for the Y-12 National Security Complex. A common misconception, even within the DOE community, understates the nature and complexity of material control and accountability (MC and A) systems, likening them to parcel delivery systems tracking packages at various locations or banking systems that account for money, down to the penny. A major point set forth in this paper is that MC and A systems such as DYMCAS can be and often are very complex. Given accountability reporting requirements and the critical and sensitive nature of the task, no MC and A system can be simple. The complexity of site-level accountability systems, however, varies dramatically depending on the amounts, kinds, and forms of nuclear materials and the kinds of processing performed at the site. Some accountability systems are tailored to unique and highly complex site-level materials and material processing and, consequently, are highly complex systems. Sites with less complexity require less complex accountability systems, and where processes and practices are the same or similar, sites on the mid-to-low end of the complexity scale can effectively utilize a standard accountability system. In addition to being complex, a unique feature of DYMCAS is its integration with the site production control and manufacturing system. This paper will review the advantages of such integration, as well as related challenges, and make the point that the effectiveness of complex MC and A systems can be significantly enhanced through appropriate systems integration

  16. The Medicare Health Outcomes Survey program: Overview, context, and near-term prospects

    Directory of Open Access Journals (Sweden)

    Miller Nancy A

    2004-07-01

    Full Text Available Abstract In 1996, the Centers for Medicare & Medicaid Services (CMS initiated the development of the Medicare Health Outcomes Survey (HOS. It is the first national survey to measure the quality of life and functional health status of Medicare beneficiaries enrolled in managed care. The program seeks to gather valid and reliable health status data in Medicare managed care for use in quality improvement activities, public reporting, plan accountability and improving health outcomes based on competition. The context that led to the development of the HOS was formed by the convergence of the following factors: 1 a recognized need to monitor the performance of managed care plans, 2 technical expertise and advancement in the areas of quality measurement and health outcomes assessment, 3 the existence of a tested functional health status assessment tool (SF-36®1, which was valid for an elderly population, 4 CMS leadership, and 5 political interest in quality improvement. Since 1998, there have been six baseline surveys and four follow up surveys. CMS, working with its partners, performs the following tasks as part of the HOS program: 1 Supports the technical/scientific development of the HOS measure, 2 Certifies survey vendors, 3 Collects Health Plan Employer Data and Information Set(HEDIS®2 HOS data, 4 Cleans, scores, and disseminates annual rounds of HOS data, public use files and reports to CMS, Quality Improvement Organizations (QIOs, Medicare+Choice Organizations (M+COs, and other stakeholders, 5 Trains M+COs and QIOs in the use of functional status measures and best practices for improving care, 6 Provides technical assistance to CMS, QIOs, M+COs and other data users, and 7 Conducts analyses using HOS data to support CMS and HHS priorities. CMS has recently sponsored an evaluation of the HOS program, which will provide the information necessary to enhance the future administration of the program. Information collected to date reveals that the

  17. International cooperation program on non-destructive inspection. Overview of PINC and PARENT

    International Nuclear Information System (INIS)

    Komura, Ichiro

    2016-01-01

    PINC (The Program for the Inspection of Nickel Alloy Components) and its successor program PARENT (The Program to Assess the Reliability of Emerging Nondestructive Techniques) are the programs on the verification of nondestructive inspection technology for detecting / dimension-evaluating the stress corrosion cracking (SCC) generated in the weld zone of nickel-based alloy. The US Nuclear Regulatory Commission plays a leading role, and the institutions of the United States, Japan, Korea, Sweden, Finland, and Switzerland participate in them. PINC was run from 2003 to 2009, and PARENT is currently underway with a schedule from 2010 to July 2017, including the extension period after July 2015. This paper outlined the implementation items and test results / achievements of PINC and PARENT programs. The target parts of PINC were a safe-end reducer and a reactor bottom instrument tube rest, and the flaw detection test and its analytical evaluation were carried out with a focus on the detectability and the sizing accuracy of defects. As a feature of the verification test of the non-destructive inspection technology in PARENT, two kinds of flaw detection tests, namely blind test and open test, are distinctively carried out. (A.O.)

  18. An overview of the history of the US geologic repository program: policies, polities, and the public

    International Nuclear Information System (INIS)

    Hongnian Jow

    2010-01-01

    The high-level radioactive waste (HLW) and spent nuclear fuels (SNF) disposal program in the US started in 1950s soon after the Atomic Energy Act was passed by the US Congress. Early on, in 1955, the nuclear experts had recognized the difficulty of waste disposal as the most difficult problem in the peaceful use of nuclear energy. The development and evolution of the HLW/SNF disposal program from 1950s to the current status will be briefly discussed, including the importance of legislation process of Nuclear Waste Policy Act, its Amendments, and their impacts on the development of disposal program in the US. The recent developments of Yucca Mountain project from License Application in 2008 through the DOE's announcement of withdrawing the License Application in January 2010 will also be discussed. (authors)

  19. Overview of European and other non-US/USSR/Japan launch vehicle and propulsion technology programs

    Science.gov (United States)

    Rice, Eric E.

    1991-01-01

    The following subject areas are covered: majority of propulsion technology development work is directly related to the ESA's Ariane 5 program and heavily involves SEP (Societe Europeenne de Propulsion) in all areas; Hermes; advanced work on magnetic bearings for turbomachinery; electric propulsion using Cs and Xe propellants done by SEP in France, MBB ERNO in West Germany, and by Culham Lab in UK; successfully tested fired H/O composite nozzle exit cone on 3rd stage of Ariane; turbine blades made of composites to allow increase in gas temperature and improvement in efficiency; combined cycle (turboramjet-rocket) engine analysis work done by Hyperspace; and ESA advanced program studies.

  20. 75 FR 39510 - Office of Postsecondary Education; Overview Information; Off-Campus Community Service Program...

    Science.gov (United States)

    2010-07-09

    ... emergencies and natural disasters. Program Authority: Section 447 of the HEA; 42 U.S.C. 2756a. Applicable... applicant, address the selection criteria that reviewers use to evaluate your application. You must limit...'s Authorizing Representative must sign this form. (3) Place the PR/Award number in the upper right...