WorldWideScience

Sample records for system gis maps

  1. Hadoop-GIS: A High Performance Spatial Data Warehousing System over MapReduce.

    Science.gov (United States)

    Aji, Ablimit; Wang, Fusheng; Vo, Hoang; Lee, Rubao; Liu, Qiaoling; Zhang, Xiaodong; Saltz, Joel

    2013-08-01

    Support of high performance queries on large volumes of spatial data becomes increasingly important in many application domains, including geospatial problems in numerous fields, location based services, and emerging scientific applications that are increasingly data- and compute-intensive. The emergence of massive scale spatial data is due to the proliferation of cost effective and ubiquitous positioning technologies, development of high resolution imaging technologies, and contribution from a large number of community users. There are two major challenges for managing and querying massive spatial data to support spatial queries: the explosion of spatial data, and the high computational complexity of spatial queries. In this paper, we present Hadoop-GIS - a scalable and high performance spatial data warehousing system for running large scale spatial queries on Hadoop. Hadoop-GIS supports multiple types of spatial queries on MapReduce through spatial partitioning, customizable spatial query engine RESQUE, implicit parallel spatial query execution on MapReduce, and effective methods for amending query results through handling boundary objects. Hadoop-GIS utilizes global partition indexing and customizable on demand local spatial indexing to achieve efficient query processing. Hadoop-GIS is integrated into Hive to support declarative spatial queries with an integrated architecture. Our experiments have demonstrated the high efficiency of Hadoop-GIS on query response and high scalability to run on commodity clusters. Our comparative experiments have showed that performance of Hadoop-GIS is on par with parallel SDBMS and outperforms SDBMS for compute-intensive queries. Hadoop-GIS is available as a set of library for processing spatial queries, and as an integrated software package in Hive.

  2. Demonstration of Hadoop-GIS: A Spatial Data Warehousing System Over MapReduce.

    Science.gov (United States)

    Aji, Ablimit; Sun, Xiling; Vo, Hoang; Liu, Qioaling; Lee, Rubao; Zhang, Xiaodong; Saltz, Joel; Wang, Fusheng

    2013-11-01

    The proliferation of GPS-enabled devices, and the rapid improvement of scientific instruments have resulted in massive amounts of spatial data in the last decade. Support of high performance spatial queries on large volumes data has become increasingly important in numerous fields, which requires a scalable and efficient spatial data warehousing solution as existing approaches exhibit scalability limitations and efficiency bottlenecks for large scale spatial applications. In this demonstration, we present Hadoop-GIS - a scalable and high performance spatial query system over MapReduce. Hadoop-GIS provides an efficient spatial query engine to process spatial queries, data and space based partitioning, and query pipelines that parallelize queries implicitly on MapReduce. Hadoop-GIS also provides an expressive, SQL-like spatial query language for workload specification. We will demonstrate how spatial queries are expressed in spatially extended SQL queries, and submitted through a command line/web interface for execution. Parallel to our system demonstration, we explain the system architecture and details on how queries are translated to MapReduce operators, optimized, and executed on Hadoop. In addition, we will showcase how the system can be used to support two representative real world use cases: large scale pathology analytical imaging, and geo-spatial data warehousing.

  3. Assessment of training needs and preferences for geographic information systems (GIS) mapping in state comprehensive cancer-control programs.

    Science.gov (United States)

    Hopfer, Suellen; Chadwick, Amy E; Parrott, Roxanne L; Ghetian, Christie B; Lengerich, Eugene J

    2009-10-01

    Geographic information systems (GIS) mapping technologies have potential to advance public health promotion by mapping regional differences in attributes (e.g., disease burden, environmental exposures, access to health care services) to suggest priorities for public health interventions. Training in GIS for comprehensive cancer control (CCC) has been overlooked. State CCC programs' GIS training needs were assessed by interviewing 49 state CCC directors. A majority perceived a need for GIS training, slightly more than half of state CCC programs had access to geocoded data, and the majority of programs did not require continuing education credits of their staff. CCC directors perceived judging maps and realizing their limitations as important skills and identified epidemiologists, CCC staff, public health officials, policy makers, and cancer coalition members as training audiences. They preferred in-class training sessions that last a few hours to a day. Lessons learned are shared to develop training programs with translatable GIS skills for CCC.

  4. Basic mapping principles for visualizing cancer data using Geographic Information Systems (GIS).

    Science.gov (United States)

    Brewer, Cynthia A

    2006-02-01

    Maps and other data graphics may play a role in generating ideas and hypotheses at the beginning of a project. They are useful as part of analyses for evaluating model results and then at the end of a project when researchers present their results and conclusions to varied audiences, such as their local research group, decision makers, or a concerned public. Cancer researchers are gaining skill with geographic information system (GIS) mapping as one of their many tools and are broadening the symbolization approaches they use for investigating and illustrating their data. A single map is one of many possible representations of the data, so making multiple maps is often part of a complete mapping effort. Symbol types, color choices, and data classing each affect the information revealed by a map and are best tailored to the specific characteristics of data. Related data can be examined in series with coordinated classing and can also be compared using multivariate symbols that build on the basic rules of symbol design. Informative legend wording and setting suitable map projections are also basic to skilled mapmaking.

  5. Combining Google Earth and GIS mapping technologies in a dengue surveillance system for developing countries

    Directory of Open Access Journals (Sweden)

    Sobieszczyk Magdalena E

    2009-07-01

    Full Text Available Abstract Background Dengue fever is a mosquito-borne illness that places significant burden on tropical developing countries with unplanned urbanization. A surveillance system using Google Earth and GIS mapping technologies was developed in Nicaragua as a management tool. Methods and Results Satellite imagery of the town of Bluefields, Nicaragua captured from Google Earth was used to create a base-map in ArcGIS 9. Indices of larval infestation, locations of tire dumps, cemeteries, large areas of standing water, etc. that may act as larval development sites, and locations of the homes of dengue cases collected during routine epidemiologic surveying were overlaid onto this map. Visual imagery of the location of dengue cases, larval infestation, and locations of potential larval development sites were used by dengue control specialists to prioritize specific neighborhoods for targeted control interventions. Conclusion This dengue surveillance program allows public health workers in resource-limited settings to accurately identify areas with high indices of mosquito infestation and interpret the spatial relationship of these areas with potential larval development sites such as garbage piles and large pools of standing water. As a result, it is possible to prioritize control strategies and to target interventions to highest risk areas in order to eliminate the likely origin of the mosquito vector. This program is well-suited for resource-limited settings since it utilizes readily available technologies that do not rely on Internet access for daily use and can easily be implemented in many developing countries for very little cost.

  6. Mapping of Student Sustainable Development Education Knowledge in Malaysia Using Geographical Information System (GIS)

    Science.gov (United States)

    Mahat, Hanifah; Hashim, Mohmadisa; Nayan, Nasir; Saleh, Yazid; Norkhaidi, Saiyidatina Balkhis

    2018-01-01

    This article aims to examine the levels of education for sustainable development (ESD) knowledge among students in secondary schools according to zones in Malaysia by using GIS mapping. The five main zones of the study were the north zone, the south zone, the east coast zone, the central zone, and the East Malaysia zone. This quantitative form of…

  7. Analysis of tsunami disaster map by Geographic Information System (GIS): Aceh Singkil-Indonesia

    Science.gov (United States)

    Farhan, A.; Akhyar, H.

    2017-02-01

    Tsunami risk map is used by stakeholder as a base to decide evacuation plan and evaluates from disaster. Aceh Singkil district of Aceh- Indonesia’s disaster maps have been developed and analyzed by using GIS tool. Overlay methods through algorithms are used to produce hazard map, vulnerability, capacity and finally created disaster risk map. Spatial maps are used topographic maps, administrative map, SRTM. The parameters are social, economic, physical environmental vulnerability, a level of exposed people, parameters of houses, public building, critical facilities, productive land, population density, sex ratio, poor ratio, disability ratio, age group ratio, the protected forest, natural forest, and mangrove forest. The results show high-risk tsunami disaster at nine villages; moderate levels are seventeen villages, and other villages are shown in the low level of tsunami risk disaster.

  8. Possibility of Preparing Thematic Maps Through Developing of the Geographic Information System (GIS

    Directory of Open Access Journals (Sweden)

    Stjepan Husnjak

    2013-04-01

    Full Text Available It is a well known fact that nowadays planning of sustainable development and land use requires a lot of reliable and good quality information, which serves as the basis for timely and adequate decision-making. One of the most important forms of information is presented in various maps. Until recently, preparing of such data was, no doubt, a rather complex and time-consuming task. However, at present, thanks to, first of all, the GIS technology it is possible to develop corresponding geographic information systems with databases which then allow comparatively simple and quick preparing of necessary thematic maps. The paper first presents the method of developing the Geographic and Land Information System (GLIS of the Karlovac County which, although developed for the purpose of agricultural development, may also be used in the development of forestry, environment protection, physical planning, water management and for soil conservation and regulation. Several examples illustrate the possibilities of preparing of specialised maps based on this GLIS. The basic data for developing of the geographic and land information system were the data of the Basic Soil Maps and topographic maps of the Republic of Croatia at the scale of 1:50 000 or 1:25 000, and the data from other studies made for the purpose of agricultural development in the area. These data, together with the results of processing and analysing of this data, by digitalisation, generalisation and interpolation, were incorporated into an integrated database of the geographic and land information system by using Microstation, AutoCad, ArcInfo, ArcWiew and Access software and the corresponding hardware. GLIS database consists of two parts. The first part includes the data referring to polygons - pedological contours, and the other part the data on pedological profiles. The base is organised in a way that enable the preparation of different thematic maps, but it can be also used in digital form

  9. Hazard, Vulnerability and Capacity Mapping for Landslides Risk Analysis using Geographic Information System (GIS)

    Science.gov (United States)

    Sari, D. A. P.; Innaqa, S.; Safrilah

    2017-06-01

    This research analyzed the levels of disaster risk in the Citeureup sub-District, Bogor Regency, West Java, based on its potential hazard, vulnerability and capacity, using map to represent the results, then Miles and Huberman analytical techniques was used to analyze the qualitative interviews. The analysis conducted in this study is based on the concept of disaster risk by Wisner. The result shows that the Citeureup sub-District has medium-low risk of landslides. Of the 14 villages, three villages have a moderate risk level, namely Hambalang, Tajur, and Tangkil, or 49.58% of the total land area. Eleven villages have a low level of risk, namely Pasir Mukti, Sanja, Tarikolot, Gunung Sari, Puspasari, East Karang Asem, Citeureup, Leuwinutug, Sukahati, West Karang Asem West and Puspanegara, or 48.68% of the total land area, for high-risk areas only around 1.74%, which is part of Hambalang village. The analysis using Geographic Information System (GIS) prove that areas with a high risk potential does not necessarily have a high level of risk. The capacity of the community plays an important role to minimize the risk of a region. Disaster risk reduction strategy is done by creating a safe condition, which intensified the movement of disaster risk reduction.

  10. Estimating and mapping the incidence of dengue and chikungunya in Honduras during 2015 using Geographic Information Systems (GIS).

    Science.gov (United States)

    Zambrano, Lysien I; Sierra, Manuel; Lara, Bredy; Rodríguez-Núñez, Iván; Medina, Marco T; Lozada-Riascos, Carlos O; Rodríguez-Morales, Alfonso J

    Geographical information systems (GIS) use for development of epidemiological maps in dengue has been extensively used, however not in other emerging arboviral diseases, nor in Central America. Surveillance cases data (2015) were used to estimate annual incidence rates of dengue and chikungunya (cases/100,000 pop) to develop the first maps in the departments and municipalities of Honduras. The GIS software used was Kosmo Desktop 3.0RC1 ® . Four thematic maps were developed according departments, municipalities, diseases incidence rates. A total of 19,289 cases of dengue and 85,386 of chikungunya were reported (median, 726 cases/week for dengue and 1460 for chikungunya). Highest peaks were observed at weeks 25th and 27th, respectively. There was association between progression by weeks (p37%, both). Use of GIS-based epidemiological maps allow to guide decisions-taking for prevention and control of diseases that still represents significant issues in the region and the country, but also in emerging conditions. Copyright © 2016 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

  11. Tsunami vulnerability assessment mapping for the west coast of Peninsular Malaysia using a geographical information system (GIS)

    International Nuclear Information System (INIS)

    Najihah, R; Effendi, D M; Hairunnisa, M A; Masiri, K

    2014-01-01

    The catastrophic Indian Ocean tsunami of 26 December 2004 raised a number of questions for scientist and politicians on how to deal with the tsunami risk and assessment in coastal regions. This paper discusses the challenges in tsunami vulnerability assessment and presents the result of tsunami disaster mapping and vulnerability assessment study for West Coast of Peninsular Malaysia. The spatial analysis was carried out using Geographical Information System (GIS) technology to demarcate spatially the tsunami affected village's boundary and suitable disaster management program can be quickly and easily developed. In combination with other thematic maps such as road maps, rail maps, school maps, and topographic map sheets it was possible to plan the accessibility and shelter to the affected people. The tsunami vulnerability map was used to identify the vulnerability of villages/village population to tsunami. In the tsunami vulnerability map, the intensity of the tsunami was classified as hazard zones based on the inundation level in meter (contour). The approach produced a tsunami vulnerability assessment map consists of considering scenarios of plausible extreme, tsunami-generating events, computing the tsunami inundation levels caused by different events and scenarios and estimating the possible range of casualties for computing inundation levels. The study provides an interactive means to identify the tsunami affected areas after the disaster and mapping the tsunami vulnerable village before for planning purpose were the essential exercises for managing future disasters

  12. Tsunami vulnerability assessment mapping for the west coast of Peninsular Malaysia using a geographical information system (GIS)

    Science.gov (United States)

    Najihah, R.; Effendi, D. M.; Hairunnisa, M. A.; Masiri, K.

    2014-02-01

    The catastrophic Indian Ocean tsunami of 26 December 2004 raised a number of questions for scientist and politicians on how to deal with the tsunami risk and assessment in coastal regions. This paper discusses the challenges in tsunami vulnerability assessment and presents the result of tsunami disaster mapping and vulnerability assessment study for West Coast of Peninsular Malaysia. The spatial analysis was carried out using Geographical Information System (GIS) technology to demarcate spatially the tsunami affected village's boundary and suitable disaster management program can be quickly and easily developed. In combination with other thematic maps such as road maps, rail maps, school maps, and topographic map sheets it was possible to plan the accessibility and shelter to the affected people. The tsunami vulnerability map was used to identify the vulnerability of villages/village population to tsunami. In the tsunami vulnerability map, the intensity of the tsunami was classified as hazard zones based on the inundation level in meter (contour). The approach produced a tsunami vulnerability assessment map consists of considering scenarios of plausible extreme, tsunami-generating events, computing the tsunami inundation levels caused by different events and scenarios and estimating the possible range of casualties for computing inundation levels. The study provides an interactive means to identify the tsunami affected areas after the disaster and mapping the tsunami vulnerable village before for planning purpose were the essential exercises for managing future disasters.

  13. Transmission tower classification based on landslide risk map generated by Geographical Information System (GIS) at Cameron Highlands

    International Nuclear Information System (INIS)

    Hazwani N K; Rohayu C O; Fathoni U; Baharuddin, Inz

    2013-01-01

    Transmission tower is usually locates at remote area which is covered by hilly topography. Landslide is mainly occurring at hilly area and causing failure to the tower structure. This phenomenon subsequently will affect the national electricity supply. A landslide risk hazard map is generated using Geographical Information System (GIS). Risk classification is introduced to initiate the monitoring process along Jor-Bintang transmission line, Cameron Highland, Pahang. The classification has been divided into three categories, which are low, medium and high. This method can be applied in slope monitoring activities since all towers have been classified based on their risk level. Therefore, maintenance schedule can be planned smoothly and efficiently.

  14. Transmission tower classification based on landslide risk Map generated by Geographical Information System (GIS) at Cameron Highlands

    International Nuclear Information System (INIS)

    Hazwani N K; Rohayu C O; Fathoni U; Baharuddin, I N Z; Azwin Z A

    2013-01-01

    Transmission tower is usually locates at remote area which is covered by hilly topography. Landslide is mainly occurring at hilly area and causing failure to the tower structure. This phenomenon subsequently will affect the national electricity supply. A landslide risk hazard map is generated using Geographical Information System (GIS). Risk classification is introduced to initiate the monitoring process along Jor-Bintang transmission line, Cameron Highland, Pahang. The classification has been divided into three categories, which are low, medium and high. This method can be applied in slope monitoring activities since all towers have been classified based on their risk level. Therefore, maintenance schedule can be planned smoothly and efficiently.

  15. Development of a web based GIS for health facilities mapping ...

    African Journals Online (AJOL)

    Hilary Mushonga

    Key Words: Spatial Decision Support System, Web GIS, Mapping, Health geography. 1. Introduction ... Health geography is an area of medical research that incorporates geographic techniques into the study of ... street water pump. Once the ...

  16. Statewide GIS mapping of recurring congestion corridors : final report.

    Science.gov (United States)

    2009-07-01

    Recurring congestion occurs when travel demand reaches or exceeds the available roadway : capacity. This project developed an interactive geographic information system (GIS) map of the : recurring congestion corridors (labeled herein as hotspots) in ...

  17. Landslide susceptibility mapping at Hoa Binh province (Vietnam) using an adaptive neuro-fuzzy inference system and GIS

    Science.gov (United States)

    Tien Bui, Dieu; Pradhan, Biswajeet; Lofman, Owe; Revhaug, Inge; Dick, Oystein B.

    2012-08-01

    The objective of this study is to investigate a potential application of the Adaptive Neuro-Fuzzy Inference System (ANFIS) and the Geographic Information System (GIS) as a relatively new approach for landslide susceptibility mapping in the Hoa Binh province of Vietnam. Firstly, a landslide inventory map with a total of 118 landslide locations was constructed from various sources. Then the landslide inventory was randomly split into a testing dataset 70% (82 landslide locations) for training the models and the remaining 30% (36 landslides locations) was used for validation purpose. Ten landslide conditioning factors such as slope, aspect, curvature, lithology, land use, soil type, rainfall, distance to roads, distance to rivers, and distance to faults were considered in the analysis. The hybrid learning algorithm and six different membership functions (Gaussmf, Gauss2mf, Gbellmf, Sigmf, Dsigmf, Psigmf) were applied to generate the landslide susceptibility maps. The validation dataset, which was not considered in the ANFIS modeling process, was used to validate the landslide susceptibility maps using the prediction rate method. The validation results showed that the area under the curve (AUC) for six ANFIS models vary from 0.739 to 0.848. It indicates that the prediction capability depends on the membership functions used in the ANFIS. The models with Sigmf (0.848) and Gaussmf (0.825) have shown the highest prediction capability. The results of this study show that landslide susceptibility mapping in the Hoa Binh province of Vietnam using the ANFIS approach is viable. As far as the performance of the ANFIS approach is concerned, the results appeared to be quite satisfactory, the zones determined on the map being zones of relative susceptibility.

  18. Selecting Map Projections in Minimizing Area Distortions in GIS Applications

    Directory of Open Access Journals (Sweden)

    Ahmet Kaya

    2008-12-01

    Full Text Available Varioussoftware for Geographical Information Systems (GISs have been developed and used in many different engineering projects. In GIS applications, map coverage is important in terms of performing reliable and meaningful queries. Map projections can be conformal, equal-area and equidistant. The goal of an application plays an important role in choosing one of those projections. Choosing the equal-area projection for an application in which area information is used (forestry, agriculture, ecosystem etc reduces the amount of distortion on the area, but many users using GIS ignore this fact and continue to use applications with present map sheets no matter in what map projection it is. For example, extracting area information from data whose country system’s map sheet is in conformal projection is relatively more distorted, compared to an equal-area projection one. The goal of this study is to make the best decision in choosing the most proper equal-area projection among the choices provided by ArcGIS 9.0, which is a popular GIS software package, and making a comparison on area errors when conformal projection is used. In this study, the area of parcels chosen in three different regions and geographic coordinates and whose sizes vary between 0.01 to 1,000,000 ha are calculated according to Transversal Mercator (TM, 3°, Universal Transversal Mercator (UTM, 6° and 14 different equal-area projections existing in the ArcGIS 9.0 GIS software package. The parcel areas calculated with geographical coordinates are accepted as definite. The difference between the sizes calculated according to projection coordinates and real sizes of the parcels are determined. Consequently, the appropriate projections are decided for the areas smaller and equal than 1,000 ha and greater than 1,000 ha in the GIS software package.

  19. Malaria diagnosis and mapping with m-Health and geographic information systems (GIS): evidence from Uganda.

    Science.gov (United States)

    Larocca, Alberto; Moro Visconti, Roberto; Marconi, Michele

    2016-10-24

    Rural populations experience several barriers to accessing clinical facilities for malaria diagnosis. Increasing penetration of ICT and mobile-phones and subsequent m-Health applications can contribute overcoming such obstacles. GIS is used to evaluate the feasibility of m-Health technologies as part of anti-malaria strategies. This study investigates where in Uganda: (1) malaria affects the largest number of people; (2) the application of m-Health protocol based on the mobile network has the highest potential impact. About 75% of the population affected by Plasmodium falciparum malaria have scarce access to healthcare facilities. The introduction of m-Health technologies should be based on the 2G protocol, as 3G mobile network coverage is still limited. The western border and the central-Southeast are the regions where m-Health could reach the largest percentage of the remote population. Six districts (Arua, Apac, Lira, Kamuli, Iganga, and Mubende) could have the largest benefit because they account for about 28% of the remote population affected by falciparum malaria with access to the 2G mobile network. The application of m-Health technologies could improve access to medical services for distant populations. Affordable remote malaria diagnosis could help to decongest health facilities, reducing costs and contagion. The combination of m-Health and GIS could provide real-time and geo-localized data transmission, improving anti-malarial strategies in Uganda. Scalability to other countries and diseases looks promising.

  20. Malaria diagnosis and mapping with m-Health and geographic information systems (GIS: evidence from Uganda

    Directory of Open Access Journals (Sweden)

    Alberto Larocca

    2016-10-01

    Full Text Available Abstract Background Rural populations experience several barriers to accessing clinical facilities for malaria diagnosis. Increasing penetration of ICT and mobile-phones and subsequent m-Health applications can contribute overcoming such obstacles. Methods GIS is used to evaluate the feasibility of m-Health technologies as part of anti-malaria strategies. This study investigates where in Uganda: (1 malaria affects the largest number of people; (2 the application of m-Health protocol based on the mobile network has the highest potential impact. Results About 75% of the population affected by Plasmodium falciparum malaria have scarce access to healthcare facilities. The introduction of m-Health technologies should be based on the 2G protocol, as 3G mobile network coverage is still limited. The western border and the central-Southeast are the regions where m-Health could reach the largest percentage of the remote population. Six districts (Arua, Apac, Lira, Kamuli, Iganga, and Mubende could have the largest benefit because they account for about 28% of the remote population affected by falciparum malaria with access to the 2G mobile network. Conclusions The application of m-Health technologies could improve access to medical services for distant populations. Affordable remote malaria diagnosis could help to decongest health facilities, reducing costs and contagion. The combination of m-Health and GIS could provide real-time and geo-localized data transmission, improving anti-malarial strategies in Uganda. Scalability to other countries and diseases looks promising.

  1. Economic importance and GIS mapping of medicinal plants in Iran ...

    African Journals Online (AJOL)

    This study identified the economic importance of medicinal plants and evaluated with Geographical Information System (GIS) tool to develop spatial maps covering medicinal plants prevalent in Darkesh area, Northern Khorasan, Iran. Then provide the coordinates of the identified area as your results. 10 medicinal plants ...

  2. Integrating conventional classifiers with a GIS expert system to increase the accuracy of invasive species mapping

    NARCIS (Netherlands)

    Masocha, M.; Skidmore, A.K.

    2011-01-01

    Mapping the cover of invasive species using remotely sensed data alone is challenging, because many invaders occur as mid-level canopy species or as subtle understorey species and therefore contribute little to the spectral signatures captured by passive remote sensing devices. In this study, two

  3. The application of geographic information system (GIS) in forensics geoscience

    OpenAIRE

    McKinley, Jennifer

    2017-01-01

    Advances in technological developments in Geographic Information Systems (GIS) has enabled the application of GIS in landscape mapping, environmental management, natural hazard risk and disaster management. As geographi- cal information becomes more widely available through satel- lite and aerial imagery, the cost of software decreases and GIS expertise expands, it is most likely that the use of GIS will increase. The methodology has practical applications for police, crime scene investigator...

  4. Using GIS Mapping to Assess Foster Care: A Picture Is Worth a Thousand Words

    Science.gov (United States)

    Rine, Christine M.; Morales, Jocelyn; Vanyukevych, Anastasiya B.; Durand, Emily G.; Schroeder, Kurt A.

    2012-01-01

    Geographic Information Systems (GIS) have become widely used outside of traditional mapping applications, expanding their reach to social service organizations. The purpose of this article is to describe and explore the benefits of GIS mapping in identifying strengths and needs of foster care systems in rural settings through graphically assessing…

  5. GIS and geotechnical mapping of expansive soil in Toshka region

    Directory of Open Access Journals (Sweden)

    Mary Labib

    2013-09-01

    Full Text Available This paper presents the results of a subsurface site investigation that was performed to characterize different soil and rock formations along Sheikh Zayed canal with particular emphasis on the swelling characteristics of the clays in that area. Site-specific empirical correlations were developed to predict the clay swelling potential and pressure from simple and economic laboratory test results. The data were input into a Geographic Information System (GIS framework to provide interactive maps that show the spatial distribution of the variables and identify their characteristics. These maps are then used to easily identify the values of swelling pressure/potential at various locations. This research provides a tool that is based on simple index tests that can be used to provide data that otherwise would require elaborate and costly investigations; the GIS framework allows storing, retrieving and updating these data easily to assist taking supported decisions dynamically.

  6. Mapping the Distribution and Flora of the Weeds in Canola Fields of Gorgan Township by Geographic Information System (GIS

    Directory of Open Access Journals (Sweden)

    sahar jannati ataie

    2018-02-01

    Full Text Available Introduction: Oil seeds are the second world’s food supply after cereals. These crops are grown primarily for the oil contained in the seeds. The major world sources of edible seed oils are soybeans, sunflowers, canola, cotton and peanuts. Canola is one of the most important plants in the world that has great importance. The plant belongs to the Brassica genus, the botanical family that includes cauliflower and cabbages. Weeds are one of the major problems in canola production that reduce yield and its quality. In general, one of the most important factors in development of management plans is information about the weed’s flora and geographic distribution. Knowledge of weed flora enables one to use the required herbicide and formulate other suitable management strategies. It is also useful in exploiting abundant weeds as a cover crop or pasture and for other economic uses. The geographic information system has the proper use in weed science and management of agricultural information and their analysis. In this study, distribution and flora of the weeds in canola fields of Gorgan Township investigated by Geographic Information System. Material and Methods: Crop sampling was conducted during May and June 2014, in 58 canola fields in Gorgan Township (Golestan province and the weed species were sampled and detected using a W method and by specific formula of density, frequency, uniformity, and abundance of each weed species was calculated. Also, geographic coordinates of fields (latitude, altitude and elevation were determined by using GPS model Garmin map 60. After collecting data, in order to create a database of weed distribution, the data was transferred from GPS to ArcGIS 9/3.1 software. From all information obtained, consistently a database with location was created and after separation of data based on present or absence of weeds on fields, distribution maps were produced. Results and Discussion: The results showed that there are 35 weed

  7. application of geographic information system (gis) in industrial land ...

    African Journals Online (AJOL)

    DEPHILIHS

    Land capability index mapping using Geographic Information System (GIS) principles was used for this study. The study was undertaken using Arc View ... Geographic Information Systems (GIS) is one of the best approaches for this type of ..... western segments and to a small extent the east. Some of the available lands are ...

  8. GIS-aided low flow mapping

    Science.gov (United States)

    Saghafian, B.; Mohammadi, A.

    2003-04-01

    Most studies involving water resources allocation, water quality, hydropower generation, and allowable water withdrawal and transfer require estimation of low flows. Normally, frequency analysis on at-station D-day low flow data is performed to derive various T-yr return period values. However, this analysis is restricted to the location of hydrometric stations where the flow discharge is measured. Regional analysis is therefore conducted to relate the at-station low flow quantiles to watershed characteristics. This enables the transposition of low flow quantiles to ungauged sites. Nevertheless, a procedure to map the regional regression relations for the entire stream network, within the bounds of the relations, is particularly helpful when one studies and weighs alternative sites for certain water resources project. In this study, we used a GIS-aided procedure for low flow mapping in Gilan province, part of northern region in Iran. Gilan enjoys a humid climate with an average of 1100 mm annual precipitation. Although rich in water resources, the highly populated area is quite dependent on minimum amount of water to sustain the vast rice farming and to maintain required flow discharge for quality purposes. To carry out the low flow analysis, a total of 36 hydrometric stations with sufficient and reliable discharge data were identified in the region. The average area of the watersheds was 250 sq. km. Log Pearson type 3 was found the best distribution for flow durations over 60 days, while log normal fitted well the shorter duration series. Low flows with return periods of 2, 5, 10, 25, 50, and 100 year were then computed. Cluster analysis identified two homogeneous areas. Although various watershed parameters were examined in factor analysis, the results showed watershed area, length of the main stream, and annual precipitation were the most effective low flow parameters. The regression equations were then mapped with the aid of GIS based on flow accumulation maps

  9. Automation technology using Geographic Information System (GIS)

    Science.gov (United States)

    Brooks, Cynthia L.

    1994-01-01

    Airport Surface Movement Area is but one of the actions taken to increase the capacity and safety of existing airport facilities. The System Integration Branch (SIB) has designed an integrated system consisting of an electronic moving display in the cockpit, and includes display of taxi routes which will warn controllers and pilots of the position of other traffic and warning information automatically. Although, this system has in test simulation proven to be accurate and helpful; the initial process of obtaining an airport layout of the taxi-routes and designing each of them is a very tedious and time-consuming process. Other methods of preparing the display maps are being researched. One such method is the use of the Geographical Information System (GIS). GIS is an integrated system of computer hardware and software linking topographical, demographic and other resource data that is being referenced. The software can support many areas of work with virtually unlimited information compatibility due to the system's open architecture. GIS will allow us to work faster with increased efficiency and accuracy while providing decision making capabilities. GIS is currently being used at the Langley Research Center with other applications and has been validated as an accurate system for that task. GIS usage for our task will involve digitizing aerial photographs of the topology for each taxi-runway and identifying each position according to its specific spatial coordinates. The information currently being used can be integrated with the GIS system, due to its ability to provide a wide variety of user interfaces. Much more research and data analysis will be needed before this technique will be used, however we are hopeful this will lead to better usage of man-power and technological capabilities for the future.

  10. Palm Beach County FL 2007 Seagrass GIS Maps and Trends Analysis (NODC Accession 0061752)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Geographic Information System (GIS) coverage of Palm Beach County seagrasses, mangrove habitat, oyster reef, and spartina. The mapped area is the Lake Worth Lagoon...

  11. Map projections cartographic information systems

    CERN Document Server

    Grafarend, Erik W

    2006-01-01

    In the context of Geographical Information Systems (GIS) the book offers a timely review of map projections (sphere, ellipsoid, rotational surfaces) and geodetic datum transformations. For the needs of photogrammetry, computer vision, and remote sensing space projective mappings are reviewed.

  12. GIS cartography a guide to effective map design

    CERN Document Server

    Peterson, Gretchen N

    2009-01-01

    Maps, either printed or digital, can create effective communication with bosses, clients, other scientists, and the public. However, entry level GISers often find that map design was given short shrift in their pre-professional life. It is time for the GIS field, which is maturing in other ways, to improve its skills in this area. Based on the author's more than ten years of research and practice in map design, GIS Cartography: A Guide to Effective Map Design provides the tools to create truly sophisticated maps. Packed full of in-depth information and advice, this book covers all facets of ma

  13. Maps, libraries and the “GIS Librarian”: an informal review of ...

    African Journals Online (AJOL)

    Linda Fraenkel

    2013-04-10

    Apr 10, 2013 ... Maps are now incorporated into processes ... Geographical Information Systems Librarian (GIS Librarian). ... of American map libraries, academic universities, and geospatial data centers. ... new era of spatial information management. Weimer ... mapping tabular data using geographic coordinates for point ...

  14. Spatial distribution and deployment of community-based distributors implementing integrated community case management (iCCM): Geographic information system (GIS) mapping study in three South Sudan states.

    Science.gov (United States)

    Pratt, Abigail; Dale, Martin; Olivi, Elena; Miller, Jane

    2014-12-01

    In late 2012 and in conjunction with South Sudan's Ministry of Health - National Malaria Control Program, PSI (Population Services International) conducted a comprehensive mapping exercise to assess geographical coverage of its integrated community case management (iCCM) program and consider scope for expansion. The operational research was designed to provide evidence and support for low-cost mapping and monitoring systems, demonstrating the use of technology to enhance the quality of programming and to allow for the improved allocation of resources through appropriate and need-based deployment of community-based distributors (CBDs). The survey took place over the course of three months and program staff gathered GPS (global positioning system) data, along with demographic data, for over 1200 CBDs and 111 CBD supervisors operating in six counties in South Sudan. Data was collated, cleaned and quality assured, input into an Excel database, and subsequently uploaded to geographic information system (GIS) for spatial analysis and map production. The mapping results showed that over three-quarters of CBDs were deployed within a five kilometer radius of a health facility or another CBD, contrary to program planning and design. Other characteristics of the CBD and CBD supervisor profiles (age, gender, literacy) were more closely matched with other regional programs. The results of this mapping exercise provided a valuable insight into the contradictions found between a program "deployment plan" and the realities observed during field implementation. It also highlighted an important need for program implementers and national-level strategy makers to consider the natural and community-driven diffusion of CBDs, and take into consideration the strength of the local health facilities when developing a deployment plan.

  15. Application of GIS Rapid Mapping Technology in Disaster Monitoring

    Science.gov (United States)

    Wang, Z.; Tu, J.; Liu, G.; Zhao, Q.

    2018-04-01

    With the rapid development of GIS and RS technology, especially in recent years, GIS technology and its software functions have been increasingly mature and enhanced. And with the rapid development of mathematical statistical tools for spatial modeling and simulation, has promoted the widespread application and popularization of quantization in the field of geology. Based on the investigation of field disaster and the construction of spatial database, this paper uses remote sensing image, DEM and GIS technology to obtain the data information of disaster vulnerability analysis, and makes use of the information model to carry out disaster risk assessment mapping.Using ArcGIS software and its spatial data modeling method, the basic data information of the disaster risk mapping process was acquired and processed, and the spatial data simulation tool was used to map the disaster rapidly.

  16. Using GIS Mapping to Target Public Health Interventions: Examining Birth Outcomes Across GIS Techniques.

    Science.gov (United States)

    MacQuillan, E L; Curtis, A B; Baker, K M; Paul, R; Back, Y O

    2017-08-01

    With advances in spatial analysis techniques, there has been a trend in recent public health research to assess the contribution of area-level factors to health disparity for a number of outcomes, including births. Although it is widely accepted that health disparity is best addressed by targeted, evidence-based and data-driven community efforts, and despite national and local focus in the U.S. to reduce infant mortality and improve maternal-child health, there is little work exploring how choice of scale and specific GIS visualization technique may alter the perception of analyses focused on health disparity in birth outcomes. Retrospective cohort study. Spatial analysis of individual-level vital records data for low birthweight and preterm births born to black women from 2007 to 2012 in one mid-sized Midwest city using different geographic information systems (GIS) visualization techniques [geocoded address records were aggregated at two levels of scale and additionally mapped using kernel density estimation (KDE)]. GIS analyses in this study support our hypothesis that choice of geographic scale (neighborhood or census tract) for aggregated birth data can alter programmatic decision-making. Results indicate that the relative merits of aggregated visualization or the use of KDE technique depend on the scale of intervention. The KDE map proved useful in targeting specific areas for interventions in cities with smaller populations and larger census tracts, where they allow for greater specificity in identifying intervention areas. When public health programmers seek to inform intervention placement in highly populated areas, however, aggregated data at the census tract level may be preferred, since it requires lower investments in terms of time and cartographic skill and, unlike neighborhood, census tracts are standardized in that they become smaller as the population density of an area increases.

  17. Ecocity mapping using GIS: introducing a planning method for assessing and improving neighborhood vitality.

    Science.gov (United States)

    Smith, Richard; Miller, Kirstin

    2013-01-01

    Assessing neighborhood vitality is important to understanding how to improve quality of life and health outcomes. The ecocity model recognizes that cities are part of natural systems and favors walkable neighborhoods. This article introduces ecocity mapping, an innovative planning method, to the public health literature on community engagement by describing a pilot project with a new affordable housing development in Oakland, California between 2007 and 2009. Although ecocity mapping began as a paper technology, advances in geographic information systems (GIS) moved it forward. This article describes how Ecocity Builders used GIS to conduct ecocity mapping to (1) assess vitality of neighborhoods and urban centers to prioritize community health intervention pilot sites and (2) create scenario maps for use in community health planning. From fall 2007 to summer 2008, Ecocity Builders assessed neighborhood vitality using walking distance from parks, schools, rapid transit stops, grocery stores, and retail outlets. In 2008, ecocity maps were shared with residents to create a neighborhood health and sustainability plan. In 2009, Ecocity Builders developed scenario maps to show how changes to the built environment would improve air quality by reducing greenhouse gas emissions from vehicles, while increasing access to basic services and natural amenities. Community organizing with GIS was more useful than GIS alone for final site selection. GIS was useful in mapping scenarios after residents shared local neighborhood knowledge and ideas for change. Residents were interested in long-term environmental planning, provided they could meet immediate needs.

  18. State Base Map for GIS – New Digital Topographic Map of the Republic of Macedonia

    Directory of Open Access Journals (Sweden)

    Zlatko Srbinoski

    2009-12-01

    Full Text Available The basic aim of the National Spatial Data Infrastructure (NSDI built in accordance with INSPIRE directive is to standardize spatial data infrastructure on national level. In that direction, topographic maps are a basic platform for acquiring spatial data within geoinformation systems and one of the most important  segments of NSDI. This paper presents methodology of establishing the new digital topographic map of the Republic of Macedonia titled “State Base Map for GIS in Macedonia”. This paper analyzes geometrical accuracy of new digital topographic maps. Production of the new digital topographic map has been the most important cartographic project in the Republic of Macedonia since it became independent.

  19. Using GIS Maps to Improve Diabetes Prevention in New York

    Centers for Disease Control (CDC) Podcasts

    This podcast features Rachael Ruberto, MPH, New York State Department of Health research scientist and lead author of PCD’s most recent Geographic Information Systems (GIS) Snapshots article. Rachael provides an overview of her article and how GIS was used for the analysis of diabetes prevention in New York.

  20. Application of GPRS and GIS in Boiler Remote Monitoring System

    OpenAIRE

    Hongchao Wang; Yifeng Wu

    2012-01-01

    Application of GPRS and GIS in boiler remote monitoring system was designed in this paper by combining the advantage of GPRS and GIS in remote data transmission with configuration monitoring technology. The detail information of the operating conditions of the industrial boiler can be viewed by marking the location of boiler on the electronic map dynamically which can realize the unified management for industrial boiler of a region or city conveniently. Experimental application show that the ...

  1. Integrating pipeline data management application and Google maps dataset on web based GIS application unsing open source technology Sharp Map and Open Layers

    Energy Technology Data Exchange (ETDEWEB)

    Wisianto, Arie; Sania, Hidayatus [PT PERTAMINA GAS, Bontang (Indonesia); Gumilar, Oki [PT PERTAMINA GAS, Jakarta (Indonesia)

    2010-07-01

    PT Pertamina Gas operates 3 pipe segments carrying natural gas from producers to PT Pupuk Kaltim in the Kalimantan area. The company wants to build a pipeline data management system consisting of pipeline facilities, inspections and risk assessments which would run on Geographic Information Systems (GIS) platforms. The aim of this paper is to present the integration of the pipeline data management system with GIS. A web based GIS application is developed using the combination of Google maps datasets with local spatial datasets. In addition, Open Layers is used to integrate pipeline data model and Google Map dataset into a single map display on Sharp Map. The GIS based pipeline data management system developed herein constitutes a low cost, powerful and efficient web based GIS solution.

  2. The preparation of landslide map by Landslide Numerical Risk Factor (LNRF model and Geographic Information System (GIS

    Directory of Open Access Journals (Sweden)

    Ali Mohammadi Torkashvand

    2014-12-01

    Full Text Available One of the risks to threaten mountainous areas is that hillslope instability caused damage to lands. One of the most dangerous instabilities is mass movement and much movement occurs due to slip. The aim of this study is zonation of landslide hazards in a basin of the Ardebil province, the eastern slopes of Sabalan, Iran. Geological and geomorphologic conditions, climate and type of land use have caused susceptibility of this watershed to landslides. Firstly, maps of the main factors affecting landslide occurrence including slope, distance from faults, lithology, elevation and precipitation were prepared and digitized. Then, by using interpretation of aerial photos and satellite images and field views, the ground truth map of landslides was prepared. Each basic layer (factor and landslide map were integrated to compute the numeric value of each factor with the help of a Landslide Numerical Risk Factor (LNRF model and landslide occurrence percent obtained in different units from each of the maps. Finally, with overlapping different data layers, a landslide hazard zonation map was prepared. Results showed that 67.85% of the basin has high instability, 7.76% moderate instability and 24.39% low instability.

  3. A new symbol-and-GIS based detailed geomorphological mapping system: Renewal of a scientific discipline for understanding landscape development

    NARCIS (Netherlands)

    Gustavvson, M.; Kolstrup, E.; Seijmonsbergen, A.C.

    2006-01-01

    Abstract This paper presents a comprehensive and flexible new geomorphological combination legend that expands the possibilities of current geomorphological mapping concepts. The new legend is presented here at scale of 1:10,000 and it combines symbols for hydrography, morphometry/morphography,

  4. Agroforestry suitability analysis based upon nutrient availability mapping: a GIS based suitability mapping

    Directory of Open Access Journals (Sweden)

    Firoz Ahmad

    2017-05-01

    Full Text Available Agroforestry has drawn the attention of researchers due to its capacity to reduce the poverty and land degradation, improve food security and mitigate the climate change. However, the progress in promoting agroforestry is held back due to the lack of reliable data sets and appropriate tools to accurately map and to have an adequate decision making system for agroforestry modules. Agroforestry suitability being one special form of land suitability is very pertinent to study in the current times when there is tremendous pressure on the land as it is a limited commodity. The study aims for applying the geo-spatial tools towards visualizing various soil and environmental data to reveal the trends and interrelationships and to achieve a nutrient availability and agroforestry suitability map. Using weight matrix and ranks, individual maps were developed in ArcGIS 10.1 platform to generate nutrient availability map, which was later used to develop agroforestry suitability map. Watersheds were delineated using DEM in some part of the study area and were evaluated for prioritizing it and agroforestry suitability of the watersheds were also done as per the schematic flowchart. Agroforestry suitability regions were delineated based upon the weight and ranks by integrated mapping. The total open area was identified 42.4% out of which 21.6% area was found to have high suitability towards agroforestry. Within the watersheds, 22 village points were generated for creating buffers, which were further evaluated showing its proximity to high suitable agroforestry sites thus generating tremendous opportunity to the villagers to carry out agroforestry projects locally. This research shows the capability of remote sensing in studying agroforestry practices and in estimating the prominent factors for its optimal productivity. The ongoing agroforestry projects can be potentially diverted in the areas of high suitability as an extension. The use of ancillary data in GIS

  5. Improving fieldwork by using GIS for quantitative exploration, data management and digital mapping

    Science.gov (United States)

    Marra, Wouter; Alberti, Koko; van de Grint, Liesbeth; Karssenberg, Derek

    2016-04-01

    Fieldwork is an essential part of teaching geosciences. The essence of a fieldwork is to study natural phenomena in its proper context. Fieldworks dominantly utilize a learning-by-experiencing learning style and are often light on abstract thinking skills. We introduce more of the latter skills to a first-year fieldwork of several weeks by using Geographical Information Systems (GIS). We use simple techniques as the involved students had no prior experience with GIS. In our project, we introduced new tutorials prior to the fieldwork where students explored their research area using aerial photos, satellite images, an elevation model and slope-map using Google Earth and QGIS. The goal of these tutorials was to get acquainted with the area, plan the first steps of the fieldwork, and formulate hypotheses in form of a preliminary map based on quantitative data. During the actual fieldwork, half of the students processed and managed their field data using GIS, used elevation data as additional data source, and made digital geomorphological maps. This was in contrast to the other half of the students that used classic techniques with paper maps. We evaluated the learning benefits by two questionnaires (one before and one after the fieldwork), and a group interview with students that used GIS in the field. Students liked the use of Google Earth and GIS, and many indicate the added value of using quantitative maps. The hypotheses and fieldwork plans of the students were quickly superseded by insights during the fieldwork itself, but making these plans and hypotheses in advance improved the student's ability to perform empirical research. Students were very positive towards the use of GIS for their fieldwork, mainly because they experienced it as a modern and relevant technique for research and the labour market. Tech-savvy students were extra motivated and explored additional methods. There were some minor technical difficulties with using GIS during the fieldwork, but

  6. Leveraging of remote sensing and GIS on mapping in urban and regional planning applications

    International Nuclear Information System (INIS)

    Noor, Norzailawati Mohd; Abdullah, Alias; Rosni, Nur Aulia

    2014-01-01

    While remote sensing applications represent a major though still underused source of urban data, the proposed combination between remote sensing and Geo-information System (GIS) in urban and regional planning is not fully explored. In order to measure changes in land use, the need of platform in monitoring, recording, and predicting the changes is necessary for planners and developers. In advance technology of mapping process, remote sensing and GIS as tools for urban planning are already recognised. But, due to lack of implementation and awareness about the benefits of these tools, these terms look unusual. Therefore, this paper reviews the history of remote sensing and GIS in urban applications, technical skills and the challenges, and future development of remote sensing and GIS especially for urban development particularly in developing countries

  7. Regional analysis assessment of landslide hazard and zoning map for transmission line route selection using GIS

    International Nuclear Information System (INIS)

    Baharuddin, I N Z; Omar, R C; Usman, F; Mejan, M A; Halim, M K Abd; Zainol, M A; Zulkarnain, M S

    2013-01-01

    The stability of ground as foundation for infrastructure development is always associated with geology and geomorphology aspects. Failure to carefully analyze these aspects may induce ground instability such subsidence and landslide which eventually can cause catastrophe to the infrastructure i.e. instability of transmission tower. However, in some cases such as the study area this is unavoidable. A GIS system for analysis of route was favoured to perform optimal route predictions based selection by incorporating multiple influence factors into its analysis by incorporating the Landslide Hazard Map (LHM) that was produced on basis of slope map, aspect map, land use map and geological map with the help of ArcGIS using weighted overlay method. Based on LHM it is safe to conclude that the proposed route for Ulu Jelai- Neggiri-Lebir-LILO transmission line has very low risk in term of landslides.

  8. Niagara pumping generation station inundation mapping and consequence analysis with ArcGIS and Mike 21

    Energy Technology Data Exchange (ETDEWEB)

    Grover, Patrick; Khayer, Yasmin; Naumov, Aleksey [4DM Inc., Toronto, (Canada); Zhang, Yibing [Ontario Power Generation, Toronto, (Canada)

    2010-07-01

    Inundation mapping is a key factor of Ontario Power Generation's dam safety program. It is the basis for determining the hazard potential classification of the dam by modelling the consequences of a hypothetical dam failure. This paper presented the project for updating the inundation mapping and consequence analysis study at the Niagara Pump generating station (PGS) reservoir. A complete hydrotechnical assessment of the Niagara PGS reservoir was conducted. The modelling of various breach scenarios was carried out using the 2-D hydrodynamic software MIKE 21 in order to provide the hydraulic data necessary for producing the inundation maps. Updated EPRP maps were produced and a consequence analysis was performed which confirmed the existing hazard classification. The ArcGIS system was used as the underlying framework for all major components of the project. It was found that the use of GIS technologies improve the efficiency of both modelling and analysis.

  9. WOCAT mapping, GIS and the Góis municipality

    Science.gov (United States)

    Esteves, T. C. J.; Soares, J. A. A.; Ferreira, A. J. D.; Coelho, C. O. A.; Carreiras, M. A.; Lynden, G. V.

    2012-04-01

    In the scope of the goals of the association "The World Overview of Conservation Approaches and Technologies" (WOCAT), the established methodology intends to support the sustainable development of new techniques and the process of decision making in Sustainable Soil Management (SSM). Its main goal is to promote the co-existence with nature, in order to assure the wellbeing of upcoming generations. SSM is defined as the use of terrestrial resources, including soil, water, fauna, flora, for the production of goods that fulfill human needs, guaranteeing simultaneously a long-term productive potential for these resources, as well as the maintenance of their environmental functions. The EU-funded DESIRE (Desertification Mitigation & Remediation of Land: a global approach for local solutions) project is centered on SSM, having as a main goal the development and study of promising conservation, soil use and management strategies, therefore contributing for the protection of arid and semi-arid vulnerable areas. In Portugal, one of the main soil degradation and desertification agents are wildfires. There is consequently an urgent need to establish integrated conservation measures to reduce or prevent these occurrences. To do so, and for the DESIRE project, the WOCAT methodology was implemented, where it could be foreseen as 3 major questionnaires for: technologies (WOCAT Technologies), approaches (WOCAT Approaches) and mapping (WOCAT Mapping). The established methodology for WOCAT Mapping was created in order to attend the questions associated to the soil and water degradation, emphasizing the direct and socio-economic causes of this degradation. It evaluates what type of soil degradation is occurring, where, why and what actions are in practice in what respects to SSM. The association of this questionnaire to Geographical Information Systems (GIS) allows not only to produce maps, but also to calculate areas, taking into account several aspects of soil degradation and

  10. GIS-study and new Geomorphologic Mapping of Phobos

    Science.gov (United States)

    Kokhanov, Alexander; Lorenz, Cyrill; Karachevtseva, Irina

    2016-04-01

    Using raw images and processed orthoimages, obtained from "Mars Express", we have created a new GIS-catalog of grooves. During analysis, new grooves, not identified in earlier mapping attempts, were detected. For craters study the previously created catalog of craters with D >200 m [1] was used. The spatial orientation of individual grooves was estimated, which allows us to group them into several sets. All grooves in the catalog were divided into three morphological types: gutters (simple line depressions), chains of contiguous funnels, chains of noncontigual funnels. Studying craters we paid attention to its inner and outer morphology. The shape of some craters is different from the isometric. Among them were identified elliptical and polygonal craters. The study of inner morphology showed, that there prevails simple bowl-shaped craters. Also we identified a small population of craters with complex internal morphology [2], which, by analogy with similar lunar craters [3], divided into flat-bottomed, with a central mound and concentric craters. Moreover, based on elevation data, obtained from global digital elevation model [4] and calculation of relative depth, craters with D >2 km by the stage of degradation were classified. Focusing on a combination of grooves and craters, we have identified 15 morphological regions. A morphological unit was defined as a region with a certain type of relief, which differs from surrounding areas by the presence, orientation and spatial relations of groove systems and large craters (over 200 m). Each region may have its own geological history and consequently, specific history of regolith exposure. Finally, two geomorphologic maps of Phobos were created. One map represents the spatial distributions of grooves including their classifications by morphological types. The identified morphological regions are shown, and relief characteristics of these regions are briefly described. Geomorphologic map of craters shows the spatial

  11. Putting Chronic Disease on the Map: Building GIS Capacity in State and Local Health Departments

    Science.gov (United States)

    Casper, Michele; Tootoo, Joshua; Schieb, Linda

    2013-01-01

    Techniques based on geographic information systems (GIS) have been widely adopted and applied in the fields of infectious disease and environmental epidemiology; their use in chronic disease programs is relatively new. The Centers for Disease Control and Prevention’s Division for Heart Disease and Stroke Prevention is collaborating with the National Association of Chronic Disease Directors and the University of Michigan to provide health departments with capacity to integrate GIS into daily operations, which support priorities for surveillance and prevention of chronic diseases. So far, 19 state and 7 local health departments participated in this project. On the basis of these participants’ experiences, we describe our training strategy and identify high-impact GIS skills that can be mastered and applied over a short time in support of chronic disease surveillance. We also describe the web-based resources in the Chronic Disease GIS Exchange that were produced on the basis of this training and are available to anyone interested in GIS and chronic disease (www.cdc.gov/DHDSP/maps/GISX). GIS offers diverse sets of tools that promise increased productivity for chronic disease staff of state and local health departments. PMID:23786907

  12. Putting chronic disease on the map: building GIS capacity in state and local health departments.

    Science.gov (United States)

    Miranda, Marie Lynn; Casper, Michele; Tootoo, Joshua; Schieb, Linda

    2013-06-20

    Techniques based on geographic information systems (GIS) have been widely adopted and applied in the fields of infectious disease and environmental epidemiology; their use in chronic disease programs is relatively new. The Centers for Disease Control and Prevention's Division for Heart Disease and Stroke Prevention is collaborating with the National Association of Chronic Disease Directors and the University of Michigan to provide health departments with capacity to integrate GIS into daily operations, which support priorities for surveillance and prevention of chronic diseases. So far, 19 state and 7 local health departments participated in this project. On the basis of these participants' experiences, we describe our training strategy and identify high-impact GIS skills that can be mastered and applied over a short time in support of chronic disease surveillance. We also describe the web-based resources in the Chronic Disease GIS Exchange that were produced on the basis of this training and are available to anyone interested in GIS and chronic disease (www.cdc.gov/DHDSP/maps/GISX). GIS offers diverse sets of tools that promise increased productivity for chronic disease staff of state and local health departments.

  13. Using GIS Maps to Improve Diabetes Prevention in New York

    Centers for Disease Control (CDC) Podcasts

    2014-02-26

    This podcast features Rachael Ruberto, MPH, New York State Department of Health research scientist and lead author of PCD’s most recent Geographic Information Systems (GIS) Snapshots article. Rachael provides an overview of her article and how GIS was used for the analysis of diabetes prevention in New York.  Created: 2/26/2014 by Preventing Chronic Disease (PCD), National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 2/26/2014.

  14. Mapping of Landscape Cover Using Remote Sensing and GIS in ...

    African Journals Online (AJOL)

    Tadesse

    present study, Remote Sensing (RS) and Geographical Information System (GIS) techniques were used. Remotely sensed .... growing stock in Tahno range of Dehradun Forest Division. Okhandiara (2008) .... areas on an image by identifying 'training' sites of known targets and then extrapolating those spectral signatures to ...

  15. Development of a web based GIS for health facilities mapping ...

    African Journals Online (AJOL)

    Around the world health professionals and authorities, in many cases, do not have the ability to visualize health related spatial information to make timely decisions. The high cost of deploying a desktop Geographical Information System (GIS) for Public Health management coupled with the need for specialised training in ...

  16. Making maps a visual guide to map design for GIS

    CERN Document Server

    Krygier, John

    2016-01-01

    Lauded for its accessibility and beautiful design, this text has given thousands of students and professionals the tools to create effective, compelling maps. Using a wealth of illustrations--with 74 in full color--to elucidate each concisely presented point, the revised and updated third edition continues to emphasize how design choices relate to the reasons for making a map and its intended purpose. All components of map making are covered: titles, labels, legends, visual hierarchy, font selection, how to turn phenomena into visual data, data organization, symbolization, and more. Innovative

  17. Towards automated statewide land cover mapping in Wisconsin using satellite remote sensing and GIS techniques

    International Nuclear Information System (INIS)

    Cosentino, B.L.; Lillesand, T.M.

    1991-01-01

    Attention is given to an initial research project being performed by the University of Wisconsin-Madison, Environmental Remote Sensing Center in conjunction with seven local, state, and federal agencies to implement automated statewide land cover mapping using satellite remote sensing and geographical information system (GIS) techniques. The basis, progress, and future research needs for this mapping program are presented. The research efforts are directed toward strategies that integrate satellite remote sensing and GIS techniques in the generation of land cover data for multiple users of land cover information. The project objectives are to investigate methodologies that integrate satellite data with other imagery and spatial data resident in emerging GISs in the state for particular program needs, and to develop techniques that can improve automated land cover mapping efficiency and accuracy. 10 refs

  18. Remote supervision of GIS monitoring system

    Energy Technology Data Exchange (ETDEWEB)

    Pannunzio, J.; Juge, P.; Ficheux, A.; Rayon, J.L. [Areva T and D Automation Canada Inc., Monteal, PQ (Canada)

    2007-07-01

    Operators of gas-insulated substations (GIS) are increasingly concerned with failure prevention, scheduled maintenance, personnel safety and shortage of maintenance crews. Until recently, the density levels of the insulating gas sulfur hexafluoride (SF6) was the only parameter controlled in gas-insulated substations. Modern digital type control and monitoring equipment have been widely used in the past decade. Remote indication of gas density and status of dynamic components was made possible and shown on local control panels. Modern GIS monitoring systems offer features such as SF6 monitoring, SF6 leakage trends, internal arc localization and detection. The required information is recorded in a local computer and displaced onto a local human machine interface (HMI) or a local industrial PC mounted next to the GIS. These monitoring systems are used as decision making tools to facilitate maintenance activities and optimize the management of assets. This paper presented the latest developments in digital monitoring systems in terms of modern digital architecture; management of information flows between monitoring systems and control systems; operation of remote supervision; configuration of high voltage substations and information sharing; and, types of links between GIS room and remote supervision. This paper also demonstrated what can be achieved by moving the central HMI of a GIS monitoring system to the decision-making centres. It was shown that integrated features that allow remote on-line or automated management have reached an acceptable level of reliability and comfort for operators. 5 figs.

  19. Partnering with Youth to Map Their Neighborhood Environments: A Multi-Layered GIS Approach

    Science.gov (United States)

    Topmiller, Michael; Jacquez, Farrah; Vissman, Aaron T.; Raleigh, Kevin; Miller-Francis, Jenni

    2014-01-01

    Mapping approaches offer great potential for community-based participatory researchers interested in displaying youth perceptions and advocating for change. We describe a multi-layered approach for gaining local knowledge of neighborhood environments that engages youth as co-researchers and active knowledge producers. By integrating geographic information systems (GIS) with environmental audits, an interactive focus group, and sketch mapping, the approach provides a place-based understanding of physical activity resources from the situated experience of youth. Youth report safety and a lack of recreational resources as inhibiting physical activity. Maps reflecting youth perceptions aid policy-makers in making place-based improvements for youth neighborhood environments. PMID:25423245

  20. Old maps in the GIS and Internet environment

    Science.gov (United States)

    Křováková, K.; Brůna, V.; Pacina, J.

    2009-04-01

    Old maps are moreover used as data layers in GIS environment, both in raster or vector form. By comparing data from several time periods we can identify the main trends in landscape development and its spatial structure. The Laboratory of geoinformatics at Jan Evangelista Purkyně University, Czech republic is working on several projects concerned about analysis and visualization of old maps. On the poster are presented results of some of the projects solved at the laboratory. One of the most successful project is the web-application http://oldmaps.geolab.cz - where are online presented old maps from the region of Bohemia, Moravia and Silesia. On this server are accessible maps of the 1st, 2nd and partially 3rd military mapping, Müller's map of Bohemia and a part of survey operator of Stabile cadastre. On the poster are as well presented results from the Historical atlas of Czech towns and results from project solved for the National Park of Šumava in the area of Chlum.

  1. Problems with the Web Map Service Open GIS specification

    Directory of Open Access Journals (Sweden)

    Michal Šeliga

    2005-06-01

    Full Text Available The paper is not focused on the area of GeoWeb generally, because there is a lot of papers written on this topic (for examples: see the proceedings from the symposium GIS Ostrava (http://gis.vsb.cz the present. Author looks at the area from a different point of view. Is there anything wrong that comes with the Web Map Service (WMS specification? WMS (antl of course other specifications from the Open GIS Consortium (http://www.opengis.org brings new possibilities how to make GIS interoperable. The map server compatible with WMS specification publishes, upon a user request, the map as a raster (bitmap file that can be visualized by the user’s client. The bitmap can be filled up with pixels with some color values but there can be transparent pixels too. That’s why outputs from more than one map server in one map client (like in the digital cartography can be published. This possibility makes a big family of the data sources from the WMS servers that can be combined in many different ways. The user can obtain actual data from different sources and visualize them together. This advantage brings many disadvantages, which are described in the paper. There are problems with the symbology used. Data publishers can use so much different symbology (for example geologist, demographer, that the map server’s outputs should not be (quite often it is not possible eithn putted together. A more serious is a problem in the quality and temporal extent of the data. The user can combine the data with a different temporal extent and upon a visual comparison he can produce a wrong decision. For example, the harlot must be closed because there is a school in a distance less than 50 meters but the school is closed for more than two years and is used for the accommodation of the foreign workers. Another example: a school administration localised the school building with a precision to the street (it means to the centre of the street, but the school building is at

  2. DIGITAL GEOECOLOGICAL MAPS AND SEVERAL METHODS OF ITS CONSTRUCTING IN A GIS ARCGIS

    Directory of Open Access Journals (Sweden)

    S. V. Lebedev

    2015-01-01

    Full Text Available This article is focused on methods of digital geoecological maps construction with using GIS ArcGIS technologies. The technique of GIS ArcGIS mapping is illustrated by examples of GIS maps of radioactive and chemical pollution in the snow cover on the territory of St. Petersburg’s (Russia. The geostatistic and deterministic approaches were applied for interpolation of input data. The input data were presented by the coordinates of points located on territory according to the scheme of measurements. The most optimal amount of classification intervals describing the natural processes and the phenomena of all-over distribution on the geoeclogical GIS maps is the 3–5 intervals of the parameter that will be considered. The borders of classes of intervals are set in depend on existing normative of pollution in different components of environment and empirical character of study parameter distribution on territory under consideration.

  3. Use of GPS and GIS technology in surveying and mapping of wheat and cotton weeds in Khairpur district, Sindh, Pakistan

    International Nuclear Information System (INIS)

    Memon, R.A.; Khalid, S.; Mallah, A.

    2011-01-01

    Present study was conducted in the fields of Khairpur district, Sindh for the mapping of some important weeds of wheat and cotton by using GPS and GIS technology. A base map of the district was prepared by using Geographical Information System (GIS) to indicate the sampling sites and physical features of the area. Two more maps were created to depict the density and frequency of weeds of wheat and cotton crops in each Tehsil (Taluka), shown in the form of bar and pie diagrams. Present piece of work will help the scientists and managers to predict those areas, potentially subjected to weed invasion. (author)

  4. An integrated GIS application system for soil moisture data assimilation

    Science.gov (United States)

    Wang, Di; Shen, Runping; Huang, Xiaolong; Shi, Chunxiang

    2014-11-01

    The gaps in knowledge and existing challenges in precisely describing the land surface process make it critical to represent the massive soil moisture data visually and mine the data for further research.This article introduces a comprehensive soil moisture assimilation data analysis system, which is instructed by tools of C#, IDL, ArcSDE, Visual Studio 2008 and SQL Server 2005. The system provides integrated service, management of efficient graphics visualization and analysis of land surface data assimilation. The system is not only able to improve the efficiency of data assimilation management, but also comprehensively integrate the data processing and analysis tools into GIS development environment. So analyzing the soil moisture assimilation data and accomplishing GIS spatial analysis can be realized in the same system. This system provides basic GIS map functions, massive data process and soil moisture products analysis etc. Besides,it takes full advantage of a spatial data engine called ArcSDE to effeciently manage, retrieve and store all kinds of data. In the system, characteristics of temporal and spatial pattern of soil moiture will be plotted. By analyzing the soil moisture impact factors, it is possible to acquire the correlation coefficients between soil moisture value and its every single impact factor. Daily and monthly comparative analysis of soil moisture products among observations, simulation results and assimilations can be made in this system to display the different trends of these products. Furthermore, soil moisture map production function is realized for business application.

  5. Rock slope stability analysis along the North Carolina section of the Blue Ridge Parkway: Using a geographic information system (GIS) to integrate site data and digital geologic maps

    Science.gov (United States)

    Latham, R.S.; Wooten, R.M.; Cattanach, B.L.; Merschat, C.E.; Bozdog, G.N.

    2009-01-01

    In 2008, the North Carolina Geological Survey (NCGS) completed a five-year geologic and geohazards inventory of the 406-km long North Carolina segment of the Blue Ridge Parkway (BRP). The ArcGIS??? format deliverables for rock slopes include a slope movement and slope movement deposit database and maps and site-specific rock slope stability assessments at 158 locations. Database entries for known and potential rock slope failures include: location data, failure modes and dimensions, activity dates and levels, structural and lithologic data, the occurrence of sulfide minerals and acid-producing potential test results. Rock slope stability assessments include photographs of the rock cuts and show locations and orientations of rock data, seepage zones, and kinematic stability analyses. Assigned preliminary geologic hazard ratings of low, moderate and high indicate the generalized relative probability of rock fall and/or rock slide activity at a given location. Statistics compiled based on the database indicate some general patterns within the data. This information provides the National Park Service with tools that can aid in emergency preparedness, and in budgeting mitigation, maintenance and repair measures. Copyright 2009 ARMA, American Rock Mechanics Association.

  6. GIS WORK GROUP: AN OVERVIEW (INCLUDES GIS-QA AND AUDITING GIS DATABASE SYSTEMS)

    Science.gov (United States)

    In order to promote cooperation in the implementation of GIS in regional offices, a GIS Regional Workgroup was established by the ten Regions in 1989. Since that time the GIS Work Group evolved and now consists of members from each of the ten EPA Regional Offices, the Office of A...

  7. Digitizing topography map of pulau panjang Banten, using ArcGIS 9.2 and surfer 8

    International Nuclear Information System (INIS)

    Ari Nugroho and Yarianto SBS

    2010-01-01

    In supporting the site safety and feasibility assessment of the Nuclear Power Plant (NPP), has been created the topographical map based on Geographic Information System (GIS). This map was created from the primary spatial data compilation resulting from the topographical survey of Pulo Panjang Island in February 2009. A personal computer installed with ArcGIS version 9.2 from Environmental System Research Institute (ESRI) and Surfer version 8 was used to support the activity. ArcGIS 9.2 was used to compile and process an extra-terrestrial spatial data from Global Positioning System (GPS) Real Time Kinematic (RTK) while surfer 8 was used to create a contour from orthometric elevation data. The result of this activity is a topographical map of Pulo Panjang in digital data which integrated, duplicable, informative, and editable. (author)

  8. Smartphones Based Mobile Mapping Systems

    Directory of Open Access Journals (Sweden)

    A. Al-Hamad

    2014-06-01

    Full Text Available The past 20 years have witnessed an explosive growth in the demand for geo-spatial data. This demand has numerous sources and takes many forms; however, the net effect is an ever-increasing thirst for data that is more accurate, has higher density, is produced more rapidly, and is acquired less expensively. For mapping and Geographic Information Systems (GIS projects, this has been achieved through the major development of Mobile Mapping Systems (MMS. MMS integrate various navigation and remote sensing technologies which allow mapping from moving platforms (e.g. cars, airplanes, boats, etc. to obtain the 3D coordinates of the points of interest. Such systems obtain accuracies that are suitable for all but the most demanding mapping and engineering applications. However, this accuracy doesn't come cheaply. As a consequence of the platform and navigation and mapping technologies used, even an "inexpensive" system costs well over 200 000 USD. Today's mobile phones are getting ever more sophisticated. Phone makers are determined to reduce the gap between computers and mobile phones. Smartphones, in addition to becoming status symbols, are increasingly being equipped with extended Global Positioning System (GPS capabilities, Micro Electro Mechanical System (MEMS inertial sensors, extremely powerful computing power and very high resolution cameras. Using all of these components, smartphones have the potential to replace the traditional land MMS and portable GPS/GIS equipment. This paper introduces an innovative application of smartphones as a very low cost portable MMS for mapping and GIS applications.

  9. Smartphones Based Mobile Mapping Systems

    Science.gov (United States)

    Al-Hamad, A.; El-Sheimy, N.

    2014-06-01

    The past 20 years have witnessed an explosive growth in the demand for geo-spatial data. This demand has numerous sources and takes many forms; however, the net effect is an ever-increasing thirst for data that is more accurate, has higher density, is produced more rapidly, and is acquired less expensively. For mapping and Geographic Information Systems (GIS) projects, this has been achieved through the major development of Mobile Mapping Systems (MMS). MMS integrate various navigation and remote sensing technologies which allow mapping from moving platforms (e.g. cars, airplanes, boats, etc.) to obtain the 3D coordinates of the points of interest. Such systems obtain accuracies that are suitable for all but the most demanding mapping and engineering applications. However, this accuracy doesn't come cheaply. As a consequence of the platform and navigation and mapping technologies used, even an "inexpensive" system costs well over 200 000 USD. Today's mobile phones are getting ever more sophisticated. Phone makers are determined to reduce the gap between computers and mobile phones. Smartphones, in addition to becoming status symbols, are increasingly being equipped with extended Global Positioning System (GPS) capabilities, Micro Electro Mechanical System (MEMS) inertial sensors, extremely powerful computing power and very high resolution cameras. Using all of these components, smartphones have the potential to replace the traditional land MMS and portable GPS/GIS equipment. This paper introduces an innovative application of smartphones as a very low cost portable MMS for mapping and GIS applications.

  10. Web GIS in practice IV: publishing your health maps and connecting to remote WMS sources using the Open Source UMN MapServer and DM Solutions MapLab

    Directory of Open Access Journals (Sweden)

    Honda Kiyoshi

    2006-01-01

    Full Text Available Abstract Open Source Web GIS software systems have reached a stage of maturity, sophistication, robustness and stability, and usability and user friendliness rivalling that of commercial, proprietary GIS and Web GIS server products. The Open Source Web GIS community is also actively embracing OGC (Open Geospatial Consortium standards, including WMS (Web Map Service. WMS enables the creation of Web maps that have layers coming from multiple different remote servers/sources. In this article we present one easy to implement Web GIS server solution that is based on the Open Source University of Minnesota (UMN MapServer. By following the accompanying step-by-step tutorial instructions, interested readers running mainstream Microsoft® Windows machines and with no prior technical experience in Web GIS or Internet map servers will be able to publish their own health maps on the Web and add to those maps additional layers retrieved from remote WMS servers. The 'digital Asia' and 2004 Indian Ocean tsunami experiences in using free Open Source Web GIS software are also briefly described.

  11. Landslide susceptibility mapping using GIS-based statistical models and Remote sensing data in tropical environment.

    Science.gov (United States)

    Shahabi, Himan; Hashim, Mazlan

    2015-04-22

    This research presents the results of the GIS-based statistical models for generation of landslide susceptibility mapping using geographic information system (GIS) and remote-sensing data for Cameron Highlands area in Malaysia. Ten factors including slope, aspect, soil, lithology, NDVI, land cover, distance to drainage, precipitation, distance to fault, and distance to road were extracted from SAR data, SPOT 5 and WorldView-1 images. The relationships between the detected landslide locations and these ten related factors were identified by using GIS-based statistical models including analytical hierarchy process (AHP), weighted linear combination (WLC) and spatial multi-criteria evaluation (SMCE) models. The landslide inventory map which has a total of 92 landslide locations was created based on numerous resources such as digital aerial photographs, AIRSAR data, WorldView-1 images, and field surveys. Then, 80% of the landslide inventory was used for training the statistical models and the remaining 20% was used for validation purpose. The validation results using the Relative landslide density index (R-index) and Receiver operating characteristic (ROC) demonstrated that the SMCE model (accuracy is 96%) is better in prediction than AHP (accuracy is 91%) and WLC (accuracy is 89%) models. These landslide susceptibility maps would be useful for hazard mitigation purpose and regional planning.

  12. Groundwater vulnerability to pollution mapping of Ranchi district using GIS

    Science.gov (United States)

    Krishna, R.; Iqbal, J.; Gorai, A. K.; Pathak, G.; Tuluri, F.; Tchounwou, P. B.

    2015-12-01

    Groundwater pollution due to anthropogenic activities is one of the major environmental problems in urban and industrial areas. The present study demonstrates the integrated approach with GIS and DRASTIC model to derive a groundwater vulnerability to pollution map. The model considers the seven hydrogeological factors [Depth to water table ( D), net recharge ( R), aquifer media ( A), soil media ( S), topography or slope ( T), impact of vadose zone ( I) and hydraulic Conductivity( C)] for generating the groundwater vulnerability to pollution map. The model was applied for assessing the groundwater vulnerability to pollution in Ranchi district, Jharkhand, India. The model was validated by comparing the model output (vulnerability indices) with the observed nitrate concentrations in groundwater in the study area. The reason behind the selection of nitrate is that the major sources of nitrate in groundwater are anthropogenic in nature. Groundwater samples were collected from 30 wells/tube wells distributed in the study area. The samples were analyzed in the laboratory for measuring the nitrate concentrations in groundwater. A sensitivity analysis of the integrated model was performed to evaluate the influence of single parameters on groundwater vulnerability index. New weights were computed for each input parameters to understand the influence of individual hydrogeological factors in vulnerability indices in the study area. Aquifer vulnerability maps generated in this study can be used for environmental planning and groundwater management.

  13. Groundwater vulnerability to pollution mapping of Ranchi district using GIS.

    Science.gov (United States)

    Krishna, R; Iqbal, J; Gorai, A K; Pathak, G; Tuluri, F; Tchounwou, P B

    2015-12-01

    Groundwater pollution due to anthropogenic activities is one of the major environmental problems in urban and industrial areas. The present study demonstrates the integrated approach with GIS and DRASTIC model to derive a groundwater vulnerability to pollution map. The model considers the seven hydrogeological factors [Depth to water table ( D ), net recharge ( R ), aquifer media ( A ), soil media ( S ), topography or slope ( T ), impact of vadose zone ( I ) and hydraulic Conductivity( C )] for generating the groundwater vulnerability to pollution map. The model was applied for assessing the groundwater vulnerability to pollution in Ranchi district, Jharkhand, India. The model was validated by comparing the model output (vulnerability indices) with the observed nitrate concentrations in groundwater in the study area. The reason behind the selection of nitrate is that the major sources of nitrate in groundwater are anthropogenic in nature. Groundwater samples were collected from 30 wells/tube wells distributed in the study area. The samples were analyzed in the laboratory for measuring the nitrate concentrations in groundwater. A sensitivity analysis of the integrated model was performed to evaluate the influence of single parameters on groundwater vulnerability index. New weights were computed for each input parameters to understand the influence of individual hydrogeological factors in vulnerability indices in the study area. Aquifer vulnerability maps generated in this study can be used for environmental planning and groundwater management.

  14. Analysis and GIS Mapping of Flooding Hazards on 10 May 2016, Guangzhou, China

    Directory of Open Access Journals (Sweden)

    Hai-Min Lyu

    2016-10-01

    Full Text Available On 10 May 2016, Guangdong Province, China, suffered a heavy rainstorm. This rainstorm flooded the whole city of Guangzhou. More than 100,000 people were affected by the flooding, in which eight people lost their lives. Subway stations, cars, and buses were submerged. In order to analyse the influential factors of this flooding, topographical characteristics were mapped using Digital Elevation Model (DEM by the Geographical Information System (GIS and meteorological conditions were statistically summarised at both the whole city level and the district level. To analyse the relationship between flood risk and urbanization, GIS was also adopted to map the effect of the subway system using the Multiple Buffer operator over the flooding distribution area. Based on the analyses, one of the significant influential factors of flooding was identified as the urbanization degree, e.g., construction of a subway system, which forms along flood-prone areas. The total economic loss due to flooding in city centers with high urbanization has become very serious. Based on the analyses, the traditional standard of severity of flooding hazards (rainfall intensity grade was modified. Rainfall intensity for severity flooding was decreased from 50 mm to 30 mm in urbanized city centers. In order to protect cities from flooding, a “Sponge City” planning approach is recommended to increase the temporary water storage capacity during heavy rainstorms. In addition, for future city management, the combined use of GIS and Building Information Modelling (BIM is recommended to evaluate flooding hazards.

  15. Use of GIS Mapping as a Public Health Tool–-From Cholera to Cancer

    Directory of Open Access Journals (Sweden)

    George J. Musa

    2013-01-01

    Full Text Available The field of medical geographic information systems (Medical GIS has become extremely useful in understanding the bigger picture of public health. The discipline holds a substantial capacity to understand not only differences, but also similarities in population health all over the world. The main goal of marrying the disciplines of medical geography, public health and informatics is to understand how countless health issues impact populations, and the trends by which these populations are affected. From the 1990s to today, this practical approach has become a valued and progressive system in analyzing medical and epidemiological phenomena ranging from cholera to cancer. The instruments supporting this field include geographic information systems (GIS, disease surveillance, big data, and analytical approaches like the Geographical Analysis Machine (GAM, Dynamic Continuous Area Space Time Analysis (DYCAST, cellular automata, agent-based modeling, spatial statistics and self-organizing maps. The positive effects on disease mapping have proven to be tremendous as these instruments continue to have a great impact on the mission to improve worldwide health care. While traditional uses of GIS in public health are static and lacking real-time components, implementing a space-time animation in these instruments will be monumental as technology and data continue to grow.

  16. Use of GIS Mapping as a Public Health Tool-From Cholera to Cancer.

    Science.gov (United States)

    Musa, George J; Chiang, Po-Huang; Sylk, Tyler; Bavley, Rachel; Keating, William; Lakew, Bereketab; Tsou, Hui-Chen; Hoven, Christina W

    2013-01-01

    The field of medical geographic information systems (Medical GIS) has become extremely useful in understanding the bigger picture of public health. The discipline holds a substantial capacity to understand not only differences, but also similarities in population health all over the world. The main goal of marrying the disciplines of medical geography, public health and informatics is to understand how countless health issues impact populations, and the trends by which these populations are affected. From the 1990s to today, this practical approach has become a valued and progressive system in analyzing medical and epidemiological phenomena ranging from cholera to cancer. The instruments supporting this field include geographic information systems (GIS), disease surveillance, big data, and analytical approaches like the Geographical Analysis Machine (GAM), Dynamic Continuous Area Space Time Analysis (DYCAST), cellular automata, agent-based modeling, spatial statistics and self-organizing maps. The positive effects on disease mapping have proven to be tremendous as these instruments continue to have a great impact on the mission to improve worldwide health care. While traditional uses of GIS in public health are static and lacking real-time components, implementing a space-time animation in these instruments will be monumental as technology and data continue to grow.

  17. Crime Mapping and Geographical Information Systems in Crime Analysis

    OpenAIRE

    Dağlar, Murat; Argun, Uğur

    2016-01-01

    As essential apparatus in crime analysis, crime mapping and Geographical Information Systems (GIS) are being progressively more accepted by police agencies. Development in technology and the accessibility of geographic data sources make it feasible for police departments to use GIS and crime mapping. GIS and crime mapping can be utilized as devices to discover reasons contributing to crime, and hence let law enforcement agencies proactively take action against the crime problems before they b...

  18. Suitability assessment and mapping of Oyo State, Nigeria, for rice cultivation using GIS

    Science.gov (United States)

    Ayoade, Modupe Alake

    2017-08-01

    Rice is one of the most preferred food crops in Nigeria. However, local rice production has declined with the oil boom of the 1970s causing demand to outstrip supply. Rice production can be increased through the integration of Geographic Information Systems (GIS) and crop-land suitability analysis and mapping. Based on the key predictor variables that determine rice yield mentioned in relevant literature, data on rainfall, temperature, relative humidity, slope, and soil of Oyo state were obtained. To develop rice suitability maps for the state, two MCE-GIS techniques, namely the Overlay approach and weighted linear combination (WLC), using fuzzy AHP were used and compared. A Boolean land use map derived from a landsat imagery was used in masking out areas currently unavailable for rice production. Both suitability maps were classified into four categories of very suitable, suitable, moderate, and fairly moderate. Although the maps differ slightly, the overlay and WLC (AHP) approach found most parts of Oyo state (51.79 and 82.9 % respectively) to be moderately suitable for rice production. However, in areas like Eruwa, Oyo, and Shaki, rainfall amount received needs to be supplemented by irrigation for increased rice yield.

  19. Integration of CAD and GIS technology using ArcGIS for development of building information systems

    Directory of Open Access Journals (Sweden)

    Cvetinović Jelena M.

    2014-01-01

    Full Text Available Paper will present basic definitions and significance of implementation of information systems for facility maintenance, as well as terms Facility management (FM and FM lifecycle. The main focus of this paper is on CAD and GIS integration within ArcGIS software in order to consolidate different data formats for creating unique information system for FM.

  20. Presenting Digital Archives with Historical GIS: Mapping Joseph Needham's Trips in WWII China

    Science.gov (United States)

    Wu, H.

    2017-12-01

    Since 2016, select groups of students (aged 14-17) from the Independent School Foundation Academy (ISF), Hong Kong, have been constructing a Historical GIS system for the Needham Research Institute (NRI), Cambridge, UK, during their annual summer school in Cambridge. Students read the diaries and reports of Joseph Needham, the Cambridge scientist who worked in China from 1943 to 1946 as the head of the Sino-British Science Cooperation Office, and mapped out both Needham's itineraries and the location of Chinese scientific institutions he visited. By taking part in this project, students learnt two sets of skills: the historian's skills of reading and analyzing primary sources, and the geographer's skills of creating datasets and maps with a GIS software. This project will be carried on in future years, to gradually include other trips Joseph Needham undertook in China in the second half of the 20th century, thus making an essential contribution to the digitalization and the diffusion of the NRI's archives. As a historical researcher in NRI and an educator, the presenter will offer some reflections on the benefit of historical GIS projects as a venue par excellence for research institutions and schools to join force, enhancing both academic research and teaching with an enlarged social impact.

  1. Flood Hazard Mapping using Hydraulic Model and GIS: A Case Study in Mandalay City, Myanmar

    Directory of Open Access Journals (Sweden)

    Kyu Kyu Sein

    2016-01-01

    Full Text Available This paper presents the use of flood frequency analysis integrating with 1D Hydraulic model (HECRAS and Geographic Information System (GIS to prepare flood hazard maps of different return periods in Ayeyarwady River at Mandalay City in Myanmar. Gumbel’s distribution was used to calculate the flood peak of different return periods, namely, 10 years, 20 years, 50 years, and 100 years. The flood peak from frequency analysis were input into HEC-RAS model to find the corresponding flood level and extents in the study area. The model results were used in integrating with ArcGIS to generate flood plain maps. Flood depths and extents have been identified through flood plain maps. Analysis of 100 years return period flood plain map indicated that 157.88 km2 with the percentage of 17.54% is likely to be inundated. The predicted flood depth ranges varies from greater than 0 to 24 m in the flood plains and on the river. The range between 3 to 5 m were identified in the urban area of Chanayetharzan, Patheingyi, and Amarapua Townships. The highest inundated area was 85 km2 in the Amarapura Township.

  2. When GIS zooms in: spatio-genetic maps of multipaternity in Armadillidium vulgare.

    Science.gov (United States)

    Bech, Nicolas; Depeux, Charlotte; Durand, Sylvine; Debenest, Catherine; Lafitte, Alexandra; Beltran-Bech, Sophie

    2017-12-01

    Geographic information system (GIS) tools are designed to illustrate, analyse and integrate geographic or spatial data, usually on a macroscopic scale. By contrast, genetic tools focus on a microscopic scale. Because in reality, landscapes have no predefined scale, our original study aims to develop a new approach, combining both cartographic and genetic approaches to explore microscopic landscapes. For this, we focused on Armadillidium vulgare, a terrestrial isopod model in which evolutionary pressures imposed by terrestrial life have led to the development of internal fertilisation and, consequently, to associated physiological changes. Among these, the emergence of internal receptacles, found in many taxa ranging from mammals to arthropods, allowed females to store sperm from several partners, enabling multipaternity. Among arthropods, terrestrial isopods like the polygynandrous A. vulgare present a female structure, the marsupium, in which fertilised eggs migrate and develop into mancae (larval stage). To test our innovative combined approach, we proposed different males to four independent females, and at the end of incubation in the marsupium, we mapped (using GIS methods) and genotyped (using 12 microsatellite markers) all the incubated mancae. This methodology permitted to obtain spatio-genetic maps describing heterozygosity and spatial distribution of mancae and of multipaternity within the marsupial landscape. We discussed the interest of this kind of multidisciplinary approach which could improve in this case our understanding of sexual selection mechanisms in this terrestrial crustacean. Beyond the interesting model-focused insights, the main challenge of this study was the transfer of GIS techniques to a microscopic scale and our results appear so as pioneers rendering GIS tools available for studies involving imagery whatever their study scale.

  3. Assessment and GIS mapping of terrestrial Gamma radiation in Elfao area in Elgedaref states

    International Nuclear Information System (INIS)

    Hassan, N. S.

    2012-09-01

    This study is a part of national programme with an overall objective of producing radioactivity map for Sudan. It is carried out in Elfao area, the area which cover West Elgadareif and East Aljazeera State. Soil samples were collected with the aid of global positioning system (GPS) and the activity concentration of 40 K , 2 38U , 232 Th, have been measured using Nal γ-spectrometry. The average concentrations were 322±241 Bq/kg for 40 K, 20±7 Bq/kg for 2 38U and 27±1.4 Bq/kg for 232 Th. The obtained results were found to be lower than the corresponding global values reported in the UNSCEAR publications for normal areas Absorbed dose rate in air a height of 1m from the ground as calculated from the measured activity concentration using of Dose Rate Conversion Factors (DRCF) averaged 39 n Gy/h with corresponding to an annual effective dose of 48 μSv/y. These values lie within the worldwide range for normal radiation areas. Using Geographical Information System (GIS), prediction maps for activity concentrations of 40 K, 2 38U , 232 Th were produced. Similar GIS predictive map for absorbed dose rate in air at a height of above ground level was produced, which showed a trend of increase from the East towards West of the study area.(Author)

  4. The Functionality of a Geography Information System (GIS) Technology in Geography Teaching: Application of a Sample Lesson

    Science.gov (United States)

    Ozgen, Nurettin

    2009-01-01

    A Geographic Information System (GIS) is a high performance computer-aided chain of software which enables us to understand, interpret, capture, update, map, and display natural and human-originated events on Earth and allows us to bring out such phenomena in a form of synthesis. Therefore, a GIS is an important information system in which…

  5. Online GIS services for mapping and sharing disease information

    DEFF Research Database (Denmark)

    Gao, Sheng; Mioc, Darka; Anton, François

    2008-01-01

    Background Disease data sharing is important for the collaborative preparation, response, and recovery stages of disease control. Disease phenomena are strongly associated with spatial and temporal factors. Web-based Geographical Information Systems provide a real-time and dynamic way to represent...... and responding to disease outbreaks. To overcome these challenges in disease data mapping and sharing, the senior authors have designed an interoperable service oriented architecture based on Open Geospatial Consortium specifications to share the spatio-temporal disease information. Results A case study...... of infectious disease mapping across New Brunswick (Canada) and Maine (USA) was carried out to evaluate the proposed architecture, which uses standard Web Map Service, Styled Layer Descriptor and Web Map Context specifications. The case study shows the effectiveness of an infectious disease surveillance system...

  6. HiGIS: An Open Framework for High Performance Geographic Information System

    Directory of Open Access Journals (Sweden)

    XIONG, W.

    2015-08-01

    Full Text Available Big data era expose many challenges to geospatial data management, geocomputation and cartography. There is no exception in geographic information systems (GIS community. Technologies and facilities of high performance computing (HPC become more and more feasible to researchers, while mobile computing, ubiquitous computing, and cloud computing are emerging. But traditional GIS need to be improved to take advantages of all these evolutions. We proposed and implemented a GIS married with high performance computing, which is called HiGIS. The goal of HiGIS is to promote the performance of geocomputation by leveraging the power of HPC, and to build an open framework for geospatial data storing, processing, displaying and sharing. In this paper the architecture, data model and modules of the HiGIS system are introduced. A geocomputation scheduling engine based on communicating sequential process was designed to exploit spatial analysis and processing. Parallel I/O strategy using file view was proposed to improve the performance of geospatial raster data access. In order to support web-based online mapping, an interactive cartographic script was provided to represent a map. A demostration of locating house was used to manifest the characteristics of HiGIS. Parallel and concurrency performance experiments show the feasibility of this system.

  7. Integrating Geographical Information Systems (GIS) with Hydrological Modelling – Applicability and Limitations

    OpenAIRE

    Rajesh VijayKumar Kherde; Dr. Priyadarshi. H. Sawant

    2013-01-01

    The evolution of Geographic information systems (GIS) facilitated the use digital terrain data for topography based hydrological modelling. The use of spatial data for hydrological modelling emerged from the great capability of GIS tools to store and handle the data associated hydro-morphology of the basin. These models utilize the spatially variable terrain data for converting rainfall into surface runoff.Manual map manipulation has always posed difficulty in analysing and designing large sc...

  8. Geographical information systems (GIS), a great tool for urban silviculture

    International Nuclear Information System (INIS)

    Otaya Burbano, Leodan Andres; Sanchez Zapata, Robinson de Jesus; Morales Soto, Leon; Botero Fernandez, Veronica

    2006-01-01

    As a pilot phase, to acquire experience, define methodologies and determine the advantages of Geographical Information Systems (GIS) for applying to urban silviculture and inventory, diagnosis, management plan and economic appraisal were made for the urban forest in the Magnolia neighborhood of the Envigado municipality, department of Antioquia, Colombia. for the management and analysis of the data collected in field, a database was designed using the software microsoft Access. The species inventoried were mapped digitally and the conditions there were analyzed using some tools and extensions of technological architecture ArcGIS 8.3 such as: characteristics, silviculture practices required, and environmental conflicts. It was determined that the GIS analysis of the urban forest conducted for a specific neighborhood can be a tool that permits environmental authorities and interested researchers to have agile and easy access to the information stored in it; it permits programming of required silviculture activities; it also permits having a general vision of the urban forest according to the infrastructure of the neighborhood, complemented by photographs of the area for improved illustration; it permits the inclusion or elimination of information in a rapid and simple manner, thus facilitating decision making with relation to management of the urban woodland and for comparison with other similar studies

  9. GIS and statistical analysis for landslide susceptibility mapping in the Daunia area, Italy

    Science.gov (United States)

    Mancini, F.; Ceppi, C.; Ritrovato, G.

    2010-09-01

    This study focuses on landslide susceptibility mapping in the Daunia area (Apulian Apennines, Italy) and achieves this by using a multivariate statistical method and data processing in a Geographical Information System (GIS). The Logistic Regression (hereafter LR) method was chosen to produce a susceptibility map over an area of 130 000 ha where small settlements are historically threatened by landslide phenomena. By means of LR analysis, the tendency to landslide occurrences was, therefore, assessed by relating a landslide inventory (dependent variable) to a series of causal factors (independent variables) which were managed in the GIS, while the statistical analyses were performed by means of the SPSS (Statistical Package for the Social Sciences) software. The LR analysis produced a reliable susceptibility map of the investigated area and the probability level of landslide occurrence was ranked in four classes. The overall performance achieved by the LR analysis was assessed by local comparison between the expected susceptibility and an independent dataset extrapolated from the landslide inventory. Of the samples classified as susceptible to landslide occurrences, 85% correspond to areas where landslide phenomena have actually occurred. In addition, the consideration of the regression coefficients provided by the analysis demonstrated that a major role is played by the "land cover" and "lithology" causal factors in determining the occurrence and distribution of landslide phenomena in the Apulian Apennines.

  10. OPERATIONAL SAR DATA PROCESSING IN GIS ENVIRONMENTS FOR RAPID DISASTER MAPPING

    Directory of Open Access Journals (Sweden)

    A. Meroni

    2013-05-01

    Full Text Available Having access to SAR data can be highly important and critical especially for disaster mapping. Updating a GIS with contemporary information from SAR data allows to deliver a reliable set of geospatial information to advance civilian operations, e.g. search and rescue missions. Therefore, we present in this paper the operational processing of SAR data within a GIS environment for rapid disaster mapping. This is exemplified by the November 2010 flash flood in the Veneto region, Italy. A series of COSMO-SkyMed acquisitions was processed in ArcGIS® using a single-sensor, multi-mode, multi-temporal approach. The relevant processing steps were combined using the ArcGIS ModelBuilder to create a new model for rapid disaster mapping in ArcGIS, which can be accessed both via a desktop and a server environment.

  11. A trial map and GIS class on junior high school with university collaboration in Yokohama, Japan

    Science.gov (United States)

    Tabe, Toshimitsu; Ohnishi, Koji

    2018-05-01

    On the new curriculum of high school in Japan, geography will be compulsory subject in Japan from 2022. The indexes of new high school geography as compulsory subject will be 1. Using of maps and GIS, 2. Understanding of the world and International collaboration: Life and culture, issues of world, 3. Disaster prevention and ESD: natural environment and disaster, and construction of ideal society. The instruction of the GIS will be one of the issues for social studies teachers in the new curriculum. The aim of this study is to make the utilize map and GIS education content through trial class in junior high school. Trial class was done on Tsurugamine junior high school in Yokohama city with university and Yokohama city school board collaboration. In the trial class, the teacher indicated the old and new topographical maps to students and asked them to consider the characteristics of the area and the land use change. Transparent sheets overlaying is useful this activity. Transparent usage indicated the GIS function of overlay. It is good activity for students to understand the function of GIS. After the considering land use changes, they considered the future of their town. The several unused lands are spread in this area. Students present their opinions how to develop them. The important thing to carry out map and GIS class through neighborhood area is preparation of adequate maps. For this preparation, collaboration with university geography stuffs or undergraduate students are effective.

  12. Development of integrated evaluation information system for sandstone-hosted uranium deposits based on ComGIS

    International Nuclear Information System (INIS)

    Ke Dan; Han Shaoyang; Hou Huiqun; Hu Shuiqing

    2006-01-01

    Component GIS owns many merits such as flexible function and easy to be used, which makes it very suitable for the development of professional GIS application system in geoscience field. During the process of exploration and evaluation for uranium resources, computer application system has been a powerful tool owning to the following functions: professional processing, management and storage of data, spatial analysis, visualization and mapping, etc. In this paper technological routine is presented for the development of integrated evaluation information system for sandstone-hosted uranium deposits based on ArcGIS Engine. General GIS functions can be realized with ArcGIS Engine easily and quickly, the developers could concentrate their attentions on developing professional functions, which will shorten the developing period and make the system more efficient. It is showed that the system developed on ArcGIS Engine platform is stable in operation, flexible in functions and professional in application. (authors)

  13. EpiScanGIS: an online geographic surveillance system for meningococcal disease

    Directory of Open Access Journals (Sweden)

    Albert Jürgen

    2008-07-01

    Full Text Available Abstract Background Surveillance of infectious diseases increasingly relies on Geographic Information Systems (GIS. The integration of pathogen fine typing data in dynamic systems and visualization of spatio-temporal clusters are a technical challenge for system development. Results An online geographic information system (EpiScanGIS based on open source components has been launched in Germany in May 2006 for real time provision of meningococcal typing data in conjunction with demographic information (age, incidence, population density. Spatio-temporal clusters of disease detected by computer assisted cluster analysis (SaTScan™ are visualized on maps. EpiScanGIS enables dynamic generation of animated maps. The system is based on open source components; its architecture is open for other infectious agents and geographic regions. EpiScanGIS is available at http://www.episcangis.org, and currently has 80 registered users, mostly from the public health service in Germany. At present more than 2,900 cases of invasive meningococcal disease are stored in the database (data as of June 3, 2008. Conclusion EpiScanGIS exemplifies GIS applications and early-warning systems in laboratory surveillance of infectious diseases.

  14. Design and Development of Countylevel Information Management System for Diseases and Pests of Hebei Province on GIS

    Science.gov (United States)

    Cheng, Xiaoyan; Zhang, Xiaoli; Xie, Fangyi

    To get a more convenience work in forest application, GIS and information system is used in forestry. GIS technology is used to build an informational management system of forest disease. For the practical requirement, the system is implemented by PDA which works outside to help completing the data collection. The major function of the system is input and output of the forest disease data and processing the report which is based on the criteria report and the assistant function of GIS. This article is aim to discuss about the theory, the process and the critical points of the information system. Besides the general information management system, GIS and PDA is introduced into the diseases system, which could combine the map and the attribute information and realize inventory data reform by PDA. The system is developed with VB and SuperMap Object (SuperMap Company).

  15. GIS-Based Integration of Subjective and Objective Weighting Methods for Regional Landslides Susceptibility Mapping

    Directory of Open Access Journals (Sweden)

    Suhua Zhou

    2016-04-01

    Full Text Available The development of landslide susceptibility maps is of great importance due to rapid urbanization. The purpose of this study is to present a method to integrate the subjective weight with objective weight for regional landslide susceptibility mapping on the geographical information system (GIS platform. The analytical hierarchy process (AHP, which is subjective, was employed to weight predictive factors’ contribution to landslide occurrence. The frequency ratio (FR method, which is objective, was used to derive subclasses’ frequency ratio with respect to landslides that indicate the relative importance of a subclass within each predictive factor. A case study was carried out at Tsushima Island, Japan, using a historical inventory of 534 landslides and seven predictive factors: elevation, slope, aspect, terrain roughness index (TRI, lithology, land cover and mean annual precipitation (MAP. The landslide susceptibility index (LSI was calculated using the weighted linear combination of factors’ weights and subclasses’ weights. The study area was classified into five susceptibility zones according to the LSI. In addition, the produced susceptibility map was compared with maps generated using the conventional FR and AHP method and validated using the relative landslide index (RLI. The validation result showed that the proposed method performed better than the conventional application of the FR method and AHP method. The obtained landslide susceptibility maps could serve as a scientific basis for urban planning and landslide hazard management.

  16. Spatial confidentiality and GIS: re-engineering mortality locations from published maps about Hurricane Katrina

    Directory of Open Access Journals (Sweden)

    Leitner Michael

    2006-10-01

    Full Text Available Abstract Background Geographic Information Systems (GIS can provide valuable insight into patterns of human activity. Online spatial display applications, such as Google Earth, can democratise this information by disseminating it to the general public. Although this is a generally positive advance for society, there is a legitimate concern involving the disclosure of confidential information through spatial display. Although guidelines exist for aggregated data, little has been written concerning the display of point level information. The concern is that a map containing points representing cases of cancer or an infectious disease, could be re-engineered back to identify an actual residence. This risk is investigated using point mortality locations from Hurricane Katrina re-engineered from a map published in the Baton Rouge Advocate newspaper, and a field team validating these residences using search and rescue building markings. Results We show that the residence of an individual, visualized as a generalized point covering approximately one and half city blocks on a map, can be re-engineered back to identify the actual house location, or at least a close neighbour, even if the map contains little spatial reference information. The degree of re-engineering success is also shown to depend on the urban characteristic of the neighborhood. Conclusion The results in this paper suggest a need to re-evaluate current guidelines for the display of point (address level data. Examples of other point maps displaying health data extracted from the academic literature are presented where a similar re-engineering approach might cause concern with respect to violating confidentiality. More research is also needed into the role urban structure plays in the accuracy of re-engineering. We suggest that health and spatial scientists should be proactive and suggest a series of point level spatial confidentiality guidelines before governmental decisions are made

  17. Spatial confidentiality and GIS: re-engineering mortality locations from published maps about Hurricane Katrina.

    Science.gov (United States)

    Curtis, Andrew J; Mills, Jacqueline W; Leitner, Michael

    2006-10-10

    Geographic Information Systems (GIS) can provide valuable insight into patterns of human activity. Online spatial display applications, such as Google Earth, can democratise this information by disseminating it to the general public. Although this is a generally positive advance for society, there is a legitimate concern involving the disclosure of confidential information through spatial display. Although guidelines exist for aggregated data, little has been written concerning the display of point level information. The concern is that a map containing points representing cases of cancer or an infectious disease, could be re-engineered back to identify an actual residence. This risk is investigated using point mortality locations from Hurricane Katrina re-engineered from a map published in the Baton Rouge Advocate newspaper, and a field team validating these residences using search and rescue building markings. We show that the residence of an individual, visualized as a generalized point covering approximately one and half city blocks on a map, can be re-engineered back to identify the actual house location, or at least a close neighbour, even if the map contains little spatial reference information. The degree of re-engineering success is also shown to depend on the urban characteristic of the neighborhood. The results in this paper suggest a need to re-evaluate current guidelines for the display of point (address level) data. Examples of other point maps displaying health data extracted from the academic literature are presented where a similar re-engineering approach might cause concern with respect to violating confidentiality. More research is also needed into the role urban structure plays in the accuracy of re-engineering. We suggest that health and spatial scientists should be proactive and suggest a series of point level spatial confidentiality guidelines before governmental decisions are made which may be reactionary toward the threat of revealing

  18. Understanding the use of geographical information systems (GIS) in health informatics research: A review.

    Science.gov (United States)

    Shaw, Nicola; McGuire, Suzanne

    2017-06-23

    The purpose of this literature review is to understand geographical information systems (GIS) and how they can be applied to public health informatics, medical informatics, and epidemiology. Relevant papers that reflected the use of geographical information systems (GIS) in health research were identified from four academic databases: Academic Search Complete, BioMed Central, PubMed Central, and Scholars Portal, as well as Google Scholar. The search strategy used was to identify articles with "geographic information systems", "GIS", "public health", "medical informatics", "epidemiology", and "health geography" as main subject headings or text words in titles and abstracts. Papers published between 1997 and 2014 were considered and a total of 39 articles were included to inform the authors on the use of GIS technologies in health informatics research. The main applications of GIS in health informatics and epidemiology include disease surveillance, health risk analysis, health access and planning, and community health profiling. GIS technologies can significantly improve quality and efficiency in health research as substantial connections can be made between a population's health and their geographical location. Gains in health informatics can be made when GIS are applied through research, however, improvements need to occur in the quantity and quality of data input for these systems to ensure better geographical health maps are used so that proper conclusions between public health and environmental factors may be made.

  19. Geographical Information Systems (GIS); Sistemas de Informacion Geografica

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Santiago, P.A. [Inisel Espacio, Madrid (Spain)

    1994-12-31

    Geographical Information Systems (GIS) have converted in a computer`s tool that due of its great versatility, exceeds of its usage as Basic Cartography Manager. The best GIS to use (vector or raster) will depend on the type of data we work with, we should keep in mind that the use of a specific GIS does not mean total incompatibility with others GIS. Future tendencies in this field aim to Data Storage Optimization and to Shared Operating System between Workstations and Personal computers. (Author)

  20. THE CONTRIBUTION OF GIS IN FLOOD MAPPING: TWO APPROACHES USING OPEN SOURCE GRASS GIS SOFTWARE

    Directory of Open Access Journals (Sweden)

    R. Marzocchi

    2014-01-01

    In this work we present a comparison between the two models mentioned above. We analyse the possibility of integrating these two approaches. We intend to use the 1D model, GIS embedded if possible, to calculate the water surface profile along the river axis and the 2D numerical one to analyse inundation beside the river levees.

  1. Structure and contents of a new geomorphological GIS database linked to a geomorphological map — With an example from Liden, central Sweden

    Science.gov (United States)

    Gustavsson, Marcus; Seijmonsbergen, Arie C.; Kolstrup, Else

    2008-03-01

    This paper presents the structure and contents of a standardised geomorphological GIS database that stores comprehensive scientific geomorphological data and constitutes the basis for processing and extracting spatial thematic data. The geodatabase contains spatial information on morphography/morphometry, hydrography, lithology, genesis, processes and age. A unique characteristic of the GIS geodatabase is that it is constructed in parallel with a new comprehensive geomorphological mapping system designed with GIS applications in mind. This close coupling enables easy digitalisation of the information from the geomorphological map into the GIS database for use in both scientific and practical applications. The selected platform, in which the geomorphological vector, raster and tabular data are stored, is the ESRI Personal geodatabase. Additional data such as an image of the original geomorphological map, DEMs or aerial orthographic images are also included in the database. The structure of the geomorphological database presented in this paper is exemplified for a study site around Liden, central Sweden.

  2. Mapping buried holocene landscapes. Past lowland environments, palaeoDEMs and preservation in GIS

    NARCIS (Netherlands)

    Cohen, K.M.; Dambrink, R.M.; Bruijn, R. de; Marges, V.C.; Erkens, G.; Pierik, H.J.; Koster, K.; Stafleu, J.; Schokker, J.; Hijma, M.P.

    2017-01-01

    In a geological GIS-data recombination project, a digital map was produced that contains information on the Netherlands’ former coastal and delta plain landscapes over the last 14,000 years: the Holocene and the very end of the Pleistocene. The polygon map product is accompanied by a set of

  3. Map-IT! A Web-Based GIS Tool for Watershed Science Education.

    Science.gov (United States)

    Curtis, David H.; Hewes, Christopher M.; Lossau, Matthew J.

    This paper describes the development of a prototypic, Web-accessible GIS solution for K-12 science education and citizen-based watershed monitoring. The server side consists of ArcView IMS running on an NT workstation. The client is built around MapCafe. The client interface, which runs through a standard Web browser, supports standard MapCafe…

  4. Elaboration of climatic maps using GIS. Case study: Olãnesti drainage basin, Romania.

    Science.gov (United States)

    Tîrlã, Laura

    2012-04-01

    Creating precise climatic maps (temperature and precipitation map especially) on small areas such as drainage basins or landform units is always very useful for ecology of plants, distribution of vegetation and also different types of agricultural land. The geographic information system (GIS) analysis of several key-factors (aspect and slope of terrain, insolation degree, thermal gradient, geology and structure of landforms) offers the necessary tools to operate with in order to create an accurate climatic map. This method was applied in order to create a map showing the distribution of temperatures in the Olanesti drainages basin, a 235 km2 area located at middle latitude, in Romania. After creating the DEM, aspect and slope of the terrain, reclassifying categories and calculating the thermal gradient, a map showing the distribution of the annual mean temperature is obtained. Other climatic parameters could be calculated for small areas too, with precise results. These demonstrate that not only elevation and mathematical location of an area are important factors in the distribution of temperature, but also the aspect, the gradient, the insolation, the type of rock and the structure.

  5. Using the Remote Sensing and GIS Technology for Erosion Risk Mapping of Kartalkaya Dam Watershed in Kahramanmaras, Turkey

    Directory of Open Access Journals (Sweden)

    Abdullah E. Akay

    2008-08-01

    Full Text Available The soil erosion is the most serious environmental problem in watershed areas in Turkey. The main factors affecting the amount of soil erosion include vegetation cover, topography, soil, and climate. In order to describe the areas with high soil erosion risks and to develop adequate erosion prevention measures in the watersheds of dams, erosion risk maps should be generated considering these factors. Remote Sensing (RS and Geographic Information System (GIS technologies were used for erosion risk mapping in Kartalkaya Dam Watershed of Kahramanmaras, Turkey, based on the methodology implemented in COoRdination of INformation on the Environment (CORINE model. ASTER imagery was used to generate a land use/cover classification in ERDAS Imagine. The digital maps of the other factors (topography, soil types, and climate were generated in ArcGIS v9.2, and were then integrated as CORINE input files to produce erosion risk maps. The results indicate that 33.82%, 35.44%, and 30.74% of the study area were under low, moderate, and high actual erosion risks, respectively. The CORINE model integrated with RS and GIS technologies has great potential for producing accurate and inexpensive erosion risk maps in Turkey.

  6. Cloud GIS Based Watershed Management

    Science.gov (United States)

    Bediroğlu, G.; Colak, H. E.

    2017-11-01

    In this study, we generated a Cloud GIS based watershed management system with using Cloud Computing architecture. Cloud GIS is used as SAAS (Software as a Service) and DAAS (Data as a Service). We applied GIS analysis on cloud in terms of testing SAAS and deployed GIS datasets on cloud in terms of DAAS. We used Hybrid cloud computing model in manner of using ready web based mapping services hosted on cloud (World Topology, Satellite Imageries). We uploaded to system after creating geodatabases including Hydrology (Rivers, Lakes), Soil Maps, Climate Maps, Rain Maps, Geology and Land Use. Watershed of study area has been determined on cloud using ready-hosted topology maps. After uploading all the datasets to systems, we have applied various GIS analysis and queries. Results shown that Cloud GIS technology brings velocity and efficiency for watershed management studies. Besides this, system can be easily implemented for similar land analysis and management studies.

  7. A GIS-driven integrated real-time surveillance pilot system for national West Nile virus dead bird surveillance in Canada

    Directory of Open Access Journals (Sweden)

    Aramini Jeff

    2006-04-01

    Full Text Available Abstract Background An extensive West Nile virus surveillance program of dead birds, mosquitoes, horses, and human infection has been launched as a result of West Nile virus first being reported in Canada in 2001. Some desktop and web GIS have been applied to West Nile virus dead bird surveillance. There have been urgent needs for a comprehensive GIS services and real-time surveillance. Results A pilot system was developed to integrate real-time surveillance, real-time GIS, and Open GIS technology in order to enhance West Nile virus dead bird surveillance in Canada. Driven and linked by the newly developed real-time web GIS technology, this integrated real-time surveillance system includes conventional real-time web-based surveillance components, integrated real-time GIS components, and integrated Open GIS components. The pilot system identified the major GIS functions and capacities that may be important to public health surveillance. The six web GIS clients provide a wide range of GIS tools for public health surveillance. The pilot system has been serving Canadian national West Nile virus dead bird surveillance since 2005 and is adaptable to serve other disease surveillance. Conclusion This pilot system has streamlined, enriched and enhanced national West Nile virus dead bird surveillance in Canada, improved productivity, and reduced operation cost. Its real-time GIS technology, static map technology, WMS integration, and its integration with non-GIS real-time surveillance system made this pilot system unique in surveillance and public health GIS.

  8. Tamarisk (Salt Cedar) Infestations in Northwestern Nevada Mapped Using Landsat TM Imagery and GIS Layers

    Science.gov (United States)

    Sengupta, D.; Geraci, C.; Kolkowitz, S.

    2004-12-01

    Tamarisk, also known as salt cedar (Tamarix sp.) is a prevalent invasive species that has infested many riparian areas in the southwestern United States. Mature salt cedar plants are resistant to high stress environments and fare well in drought conditions, mainly due to their extensive root systems that derive much of their sustenance from the water table rather than surface water and precipitation. The salt cedar root systems have altered hydrological patterns by tapping into underlying aquifers. This has decreased water available for recreational use, regional ecology and plant diversity. Many states have implemented salt cedar monitoring programs at the local level, but the problem of large-scale mapping of this invasive species has continued to be a challenge to land management agencies. Furthermore, inaccessible and unexplored areas continue to be absent in the mapping process. In August 2004, using field data consisting of large areas as training sets for classification of Landsat TM imagery, the DEVELOP student research team at NASA Ames Research Center generated a preliminary map of areas that that were susceptible to salt cedar growth for a region in northwestern Nevada. In addition to the remote sensing-based classification of satellite imagery, the team used the variables of elevation and estimated distance to the water table in conjunction with collected field data and knowledge of salt cedar growth habits to further refine the map. The team has further extended the mapping of key environmental factors of water availability for salt cedar, soil types and species distribution in regions infested by salt cedar. The investigation was carried out by 1) improving an existing GIS layer for water access using a suitable interpolation method, 2) including a GIS layer for soils associated with salt cedar growth and 3) completing field work to evaluate species distribution and regions of presence or absence of salt cedar. The outcome of this project served to

  9. GeoMEx: Geographic Information System (GIS) Prototype for Mars Express Data

    Science.gov (United States)

    Manaud, N.; Frigeri, A.; Ivanov, A. B.

    2013-09-01

    As of today almost a decade of observational data have been returned by the multidisciplinary instruments on-board the ESA's Mars Express spacecraft. All data are archived into the ESA's Planetary Science Archive (PSA), which is the central repository for all ESA's Solar System missions [1]. Data users can perform advanced queries and retrieve data from the PSA using graphical and map-based search interfaces, or via direct FTP download [2]. However the PSA still offers limited geometrical search and visualisation capabilities that are essential for scientists to identify their data of interest. A former study has shown [3] that this limitation is mostly due to the fact that (1) only a subset of the instruments observations geometry information has been modeled and ingested into the PSA, and (2) that the access to that information from GIS software is impossible without going through a cumbersome and undocumented process. With the increasing number of Mars GIS data sets available to the community [4], GIS software have become invaluable tools for researchers to capture, manage, visualise, and analyse data from various sources. Although Mars Express surface imaging data are natural candidates for use in a GIS environment, other non-imaging instruments data (subsurface, atmosphere, plasma) integration is being investigated [5]. The objective of this work is to develop a GIS prototype that will integrate all the Mars Express instruments observations geometry information into a spatial database that can be accessed from external GIS software using standard WMS and WFS protocols. We will firstly focus on the integration of surface and subsurface instruments data (HRSC, OMEGA, MARSIS). In addition to the geometry information, base and context maps of Mars derived from surface mapping instruments data will also be ingested into the system. The system back-end architecture will be implemented using open-source GIS frameworks: PostgreSQL/PostGIS for the database, and Map

  10. Evaluation of AirGIS: a GIS-based air pollution and human exposure modelling system

    DEFF Research Database (Denmark)

    Ketzel, Matthias; Berkowicz, Ruwim; Hvidberg, Martin

    2011-01-01

    This study describes in brief the latest extensions of the Danish Geographic Information System (GIS)-based air pollution and human exposure modelling system (AirGIS), which has been developed in Denmark since 2001 and gives results of an evaluation with measured air pollution data. The system...... shows, in general, a good performance for both long-term averages (annual and monthly averages), short-term averages (hourly and daily) as well as when reproducing spatial variation in air pollution concentrations. Some shortcomings and future perspectives of the system are discussed too....

  11. Role of GIS in Health Management Information System and Medical Plan: A Case Study of Gangtok area, Sikkim, India

    Directory of Open Access Journals (Sweden)

    Ashok Kumar Sharma

    2015-03-01

    Full Text Available Geographical Information System (GIS in a Health Management Information System (HMIS can be a powerful tool to make health care delivery more effective and far more efficient. It includes database management, planning, risk service area mapping, location identification, etc. One of the causes for this sudden surge of GIS use in healthcare application is the spatial dependency of health related factors. The use of GIS helps capture, store, combine, analyze and display data using Remote Sensing, topographical surveys, urban survey and town planning, geology, hydrology, traffic and transport engineering, land use pattern, rainfall pattern, and drainage. (Mathew, 2005. In the research work use of GIS software ILWIS for assessing the social network and health services available in Gangtok area, East Sikkim. Mapping of essential resources like road networks, locate the health facility in the study area and find out the population density using GIS techniques.

  12. Creating real estate maps by using GIS: A case study of Atakum-Samsun/Turkey

    Directory of Open Access Journals (Sweden)

    Faik Ahmet Sesli

    2015-12-01

    Full Text Available Determining the real estate evaluations and reflecting them on taxations are among the most important economic resources of the developed countries. In Turkey, the system is not able to ground the real estate evaluations on scientific criteria yet, which causes various problems in applications regarding real estate evaluations (such as estate tax, expropriation, court surveillances and an important economic loss.Thus, it is required to generate tax-base real estate evaluation maps within the scope of the legal legislation in Turkey. This study aimed to generate a fast, up-to-date and dynamic evaluation map that would form a base for the real estate taxation. The closeness of real estates to the technical infrastructure and social equipment areas and their variety affect the real estate evaluations either positively or negatively and form the local benefit for real estates. This study determined the areas (such as main roads, green spaces, trading areas and urban attraction centers affecting the evaluations of real estates depending on their positions. In order to make position-based decisions about the data being stored in the Geographical Information System, the geographical data were questioned and monitored with analyses. The acquired data were exposed to necessary analyses in the relevant modules of the GIS programs, which enabled us to grade the factors affecting the evaluation for each parcel and try to generate real estate evaluation maps depending on the evaluation-effect factors to be selected as dynamics. Parcel-based real estate evaluations were determined by imposing vector-based cadastral maps on these maps being generated. In this study, a raster real estate evaluation map was generated in unstructured parcels of a sample neighborhood via the scoring method and with the help of the Multi-Criteria Decision-Making Analysis and both environmental and social factors. This system could enable us to question and analyze the features of

  13. Developing Trainee Teacher Practice with Geographical Information Systems (GIS)

    Science.gov (United States)

    Walshe, Nicola

    2017-01-01

    There is general agreement that geographical information systems (GIS) have a place within the geography classroom; they offer the potential to support geographical learning, exploring real-world problems through student-centred learning, and developing spatial thinking. Despite this, teachers often avoid engaging with GIS and research suggests…

  14. Web mapping GIS: GPS under the GIS umbrella for Aedes species dengue and chikungunya vector mosquito surveillance and control

    Directory of Open Access Journals (Sweden)

    M. Palaniyandi

    2014-09-01

    Full Text Available The mosquito nuisance and the mosquito borne diseases have become major important challenging public health problems in India especially in the fast developing city like Pondicherry urban agglomeration. The Pondicherry government has been implemented full-fledged mosquito control measures, however, dengue and chikungunya epidemics was accelerating trend in Pondicherry for the recent years, and therefore, the directorate of public health, Pondicherry was requested vector control research centre (VCRC, to conduct a mosquito control evaluation survey. A team of field staff of VCRC headed by the author, Pondicherry, have conducted a detailed reconnaissance survey for collecting the site specifications of houses and the streetwise mosquito data for analyzing the density of vector mosquitoes in the wards / blocks and delineating the areas vulnerable to disease epidemics in the urban areas. The GPS GARMIN 12 XL was used to collect the field data. The ARC GIS 10.0 software was used to map the site locations (houses with mosquito’s data. The digital map of block boundary of Pondicherry was used for mapping purpose. A systematic grid sampling was applied to conduct a rapid survey for mapping Aedes species mosquito genic condition in the urban areas and the coordinates of sites of house information with breeding habitats positive in the grid sectors was collected using GPS, and the mean value of positive habitats was analyzed by quintiles method for mapping. The four blocks were selected for Aedes mosquito survey where the mosquito problem was identified as comparatively high, four numbers of wards were selected from each block, and the 40 number of houses was selected with 100 meter interval distance for mosquito breeding survey in the domestic and peripheral domestic areas in each wards. The problematic areas were identified, highlighted and recommended for web mapping GIS for Aedes mosquito surveillance continuously for monitoring the mosquito control

  15. GIS in Northern Ireland Secondary Schools: Mapping Where We Are Now

    Science.gov (United States)

    Roulston, Stephen

    2013-01-01

    A number of studies suggest that integrating Geographical Information Systems (GIS) into Geography teaching in schools has been and is challenging, and it seems that much of the early promise for the technology supporting learning in Geography has not been realised. This paper examines the progress made in Northern Ireland in implementing GIS in…

  16. Modelling Multi Hazard Mapping in Semarang City Using GIS-Fuzzy Method

    Science.gov (United States)

    Nugraha, A. L.; Awaluddin, M.; Sasmito, B.

    2018-02-01

    One important aspect of disaster mitigation planning is hazard mapping. Hazard mapping can provide spatial information on the distribution of locations that are threatened by disaster. Semarang City as the capital of Central Java Province is one of the cities with high natural disaster intensity. Frequent natural disasters Semarang city is tidal flood, floods, landslides, and droughts. Therefore, Semarang City needs spatial information by doing multi hazard mapping to support disaster mitigation planning in Semarang City. Multi Hazards map modelling can be derived from parameters such as slope maps, rainfall, land use, and soil types. This modelling is done by using GIS method with scoring and overlay technique. However, the accuracy of modelling would be better if the GIS method is combined with Fuzzy Logic techniques to provide a good classification in determining disaster threats. The Fuzzy-GIS method will build a multi hazards map of Semarang city can deliver results with good accuracy and with appropriate threat class spread so as to provide disaster information for disaster mitigation planning of Semarang city. from the multi-hazard modelling using GIS-Fuzzy can be known type of membership that has a good accuracy is the type of membership Gauss with RMSE of 0.404 the smallest of the other membership and VAF value of 72.909% of the largest of the other membership.

  17. Lentinula edodes based GIS mapping, biometabolites and antiinflamatory activity of wild edible mushrooms

    Science.gov (United States)

    Khaund, Polashree; Joshi, S R

    2016-03-01

    The biodiversity rich state of Meghalaya, India located in the realms of mega-biodiversity hotspots, is home to numerous species of wild edible macrofungi that are used extensively by the mycophillic ethnic population, as a part of their traditional cuisine and medicine systems. However, habitat loss, due to deforestation and climate change, is destroying the natural population of these mushrooms, depleting their availability to the local communities. In the present investigation, a GIS guided habitat search, using Lentinula edodes as a representative species, was used in mapping the habitats of wild edible macrofungi of the study region. Sampling of around 4 000 specimens per distinct morphological type available in the traditional markets and “sacred grove” forests indicated presence of ten common genera, belonging to nine different families of wild edible mushrooms. Nutritional profiling of the representative species Lentinula edodes was carried out by evaluation of its moisture, total fat, crude protein and carbohydrates contents by standard methods. Similarly, bioactive components determination was performed by estimation of total phenols, flavonoids, ascorbic acid, β-carotene and lycopenes. Bioactivity of the mushrooms extracts was studied using the DPPH radical scavenging and Human Red Blood Cell (HRBC) membrane stabilization assays. The present investigation successfully attempted to explore remote sensing technologies and GIS (Geographic Information System) based system to predict the natural habitats of wild edible mushrooms of Meghalaya, India which we believe will lead to the generation of a mushroom specific non-wood forest resource mapping system in the near future. Results of nutritional profiling and biological activity studies on the representative species of wild edible mushrooms from the studied region revealed that it is a rich source of essential nutrients and antioxidants.

  18. Using Web-Based GIS in Introductory Human Geography

    Science.gov (United States)

    Songer, Lynn C.

    2010-01-01

    Advocates for using a geographic information system (GIS) in education assert that GIS improves student learning. However, studies to clarify the relationship between learning and using GIS are still needed. This study examines the effects of using Web-based GIS maps in place of paper maps on students' geography content knowledge and motivation…

  19. A GIS-based multivariate clustering for characterization and ecoregion mapping from a viticultural perspective

    Directory of Open Access Journals (Sweden)

    Francisco J. Moral

    2016-08-01

    Full Text Available In wine-growing regions, zoning studies define areas according to their potential to produce specific wines and also identify the key drivers behind their variability and optimize vineyard management for sustainable viticulture. However, delineation of homogeneous zones is difficult because of the complex combination of factors which could affect zone classifications. One possibility to capture potential variability is the use of natural environmental properties as they are related to success in grape growing. With the aim of characterizing the spatial variability of the main vine-related environmental variables and determining different zones, climate and topographical data were obtained for Extremadura (southwestern Spain, an important wine region. Firstly, accurate maps of all climate indices were generated by using regression-kriging as the most suitable algorithm in which exhaustive secondary information on elevation was incorporated, and maps of topography-derived variables were obtained using GIS (Geographical Information System tools. Secondly, principal component analysis and multivariate geographic classification were used to define homogeneous classes, resulting in three zones. Each zone was further characterized by overlaying the zonation map with a geology map and all enviromental layers. It was obtained that although a wide part of the Extremaduran territory has warm climate characteristics, the zones have different viticultural potential and a high proportion of the region lays on suitable substrate. This zonation in Extremadura is the basis for further zoning studies at more detailed field scale and the modeling of vineyard response to climate change.

  20. A GIS-based multivariate clustering for characterization and ecoregion mapping from a viticultural perspective

    International Nuclear Information System (INIS)

    Moral, F.J.; Rebollo, F.J.; Paniagua, L.L.; García-Martín, A.

    2016-01-01

    In wine-growing regions, zoning studies define areas according to their potential to produce specific wines and also identify the key drivers behind their variability and optimize vineyard management for sustainable viticulture. However, delineation of homogeneous zones is difficult because of the complex combination of factors which could affect zone classifications. One possibility to capture potential variability is the use of natural environmental properties as they are related to success in grape growing. With the aim of characterizing the spatial variability of the main vine-related environmental variables and determining different zones, climate and topographical data were obtained for Extremadura (southwestern Spain), an important wine region. Firstly, accurate maps of all climate indices were generated by using regression-kriging as the most suitable algorithm in which exhaustive secondary information on elevation was incorporated, and maps of topography-derived variables were obtained using GIS (Geographical Information System) tools. Secondly, principal component analysis and multivariate geographic classification were used to define homogeneous classes, resulting in three zones. Each zone was further characterized by overlaying the zonation map with a geology map and all enviromental layers. It was obtained that although a wide part of the Extremaduran territory has warm climate characteristics, the zones have different viticultural potential and a high proportion of the region lays on suitable substrate. This zonation in Extremadura is the basis for further zoning studies at more detailed field scale and the modeling of vineyard response to climate change. (Author)

  1. A GIS-based multivariate clustering for characterization and ecoregion mapping from a viticultural perspective

    Energy Technology Data Exchange (ETDEWEB)

    Moral, F.J.; Rebollo, F.J.; Paniagua, L.L.; García-Martín, A.

    2016-11-01

    In wine-growing regions, zoning studies define areas according to their potential to produce specific wines and also identify the key drivers behind their variability and optimize vineyard management for sustainable viticulture. However, delineation of homogeneous zones is difficult because of the complex combination of factors which could affect zone classifications. One possibility to capture potential variability is the use of natural environmental properties as they are related to success in grape growing. With the aim of characterizing the spatial variability of the main vine-related environmental variables and determining different zones, climate and topographical data were obtained for Extremadura (southwestern Spain), an important wine region. Firstly, accurate maps of all climate indices were generated by using regression-kriging as the most suitable algorithm in which exhaustive secondary information on elevation was incorporated, and maps of topography-derived variables were obtained using GIS (Geographical Information System) tools. Secondly, principal component analysis and multivariate geographic classification were used to define homogeneous classes, resulting in three zones. Each zone was further characterized by overlaying the zonation map with a geology map and all enviromental layers. It was obtained that although a wide part of the Extremaduran territory has warm climate characteristics, the zones have different viticultural potential and a high proportion of the region lays on suitable substrate. This zonation in Extremadura is the basis for further zoning studies at more detailed field scale and the modeling of vineyard response to climate change. (Author)

  2. Collaborative GIS for flood susceptibility mapping: An example from Mekong river basin of Viet Nam

    Science.gov (United States)

    Thanh, B.

    2016-12-01

    Flooding is one of the most dangerous natural disasters in Vietnam. Floods have caused serious damages to people and made adverse impact on social economic development across the country, especially in lower river basin where there is high risk of flooding as consequences of the climate change and social activities. This paper presents a collaborative platform of a combination of an interactive web-GIS framework and a multi-criteria evaluation (MCE) tool. MCE is carried out in server side through web interface, in which parameters used for evaluation are groups into three major categories, including (1) climatic factor: precipitation, typhoon frequency, temperature, humidity (2) physiographic data: DEM, topographic wetness index, NDVI, stream power index, soil texture, distance to river (3) social factor: NDBI, land use pattern. Web-based GIS is based on open-source technology that includes an information page, a page for MCE tool that users can interactively alter parameters in flood susceptible mapping, and a discussion page. The system is designed for local participation in prediction of the flood risk magnitude under impacts of natural processes and human intervention. The proposed flood susceptibility assessment prototype was implemented in the Mekong river basin, Viet Nam. Index images were calculated using Landsat data, and other were collected from authorized agencies. This study shows the potential to combine web-GIS and spatial analysis tool to flood hazard risk assessment. The combination can be a supportive solution that potentially assists the interaction between stakeholders in information exchange and in disaster management, thus provides for better analysis, control and decision-making.

  3. GIS and local knowledge in disaster management: a case study of flood risk mapping in Viet Nam.

    Science.gov (United States)

    Tran, Phong; Shaw, Rajib; Chantry, Guillaume; Norton, John

    2009-03-01

    Linking community knowledge with modern techniques to record and analyse risk related data is one way of engaging and mobilising community capacity. This paper discusses the use of the Geographic Information System (GIS) at the local level and the need for integrating modern technology and indigenous knowledge into disaster management. It suggests a way to mobilise available human and technical resources in order to strengthen a good partnership between local communities and local and national institutions. The paper also analyses the current vulnerability of two communes by correlating hazard risk and loss/damage caused by disasters and the contribution that domestic risk maps in the community can make to reduce this risk. The disadvantages, advantages and lessons learned from the GIS flood risk mapping project are presented through the case study of the Quang Tho Commune in Thua Thien Hue province, central Viet Nam.

  4. Distributed GIS for automated natural hazard zonation mapping Internet-SMS warning towards sustainable society

    Directory of Open Access Journals (Sweden)

    Devanjan Bhattacharya

    2014-12-01

    Full Text Available Today, open systems are needed for real time analysis and warnings on geo-hazards and over time can be achieved using Open Source Geographical Information System (GIS-based platform such as GeoNode which is being contributed to by developers around the world. To develop on an open source platform is a very vital component for better disaster information management as far as spatial data infrastructures are concerned and this would be extremely vital when huge databases are to be created and consulted regularly for city planning at different scales, particularly satellite images and maps of locations. There is a big need for spatially referenced data creation, analysis, and management. Some of the salient points that this research would be able to definitely contribute with GeoNode, being an open source platform, are facilitating the creation, sharing, and collaborative use of geospatial data. The objective is development of an automated natural hazard zonation system with Internet-short message service (SMS warning utilizing geomatics for sustainable societies. A concept of developing an internet-resident geospatial geohazard warning system has been put forward in this research, which can communicate alerts via SMS. There has been a need to develop an automated integrated system to categorize hazard and issue warning that reaches users directly. At present, no web-enabled warning system exists which can disseminate warning after hazard evaluation at one go and in real time. The objective of this research work has been to formalize a notion of an integrated, independent, generalized, and automated geo-hazard warning system making use of geo-spatial data under popular usage platform. In this paper, a model of an automated geo-spatial hazard warning system has been elaborated. The functionality is to be modular in architecture having GIS-graphical user interface (GUI, input, understanding, rainfall prediction, expert, output, and warning modules. A

  5. Airborne radiometric data - A tool for reconnaissance geological mapping using a GIS

    International Nuclear Information System (INIS)

    Graham, D.F.; Bonham-Carter, G.F.

    1993-01-01

    A clustering technique is applied to radioelement data, and the resulting cluster map is compared with a digitized geological map within a GIS software package. The cross tabulation clearly identifies those geological units that have a distinctive radioelement response. By reclassifying the map overlay and imposing a color coding scheme that enhances bedrock geology classes, the relationship between the bedrock geology and radioelement response is enhanced. The degree of correlation between the two cartographic images is site dependent, rather than global. Areas where the two maps differ indicate zones of possible interest for field verification of published field maps for the purposes of mineral exploration. 13 refs

  6. Utilizing Participatory Mapping and GIS to Examine the Activity Spaces of Homeless Youth.

    Science.gov (United States)

    Townley, Greg; Pearson, L; Lehrwyn, Josephine M; Prophet, Nicole T; Trauernicht, Mareike

    2016-06-01

    Although previous studies have informed our understanding of certain aspects of youth homelessness, few studies have critically examined the spatial and social environments utilized by youth as they navigate life on the streets. This study employed participatory mapping and Geographic Information Systems (GIS) to examine the activity spaces of homeless youth as they relate to sense of community and psychological well-being. Participants were 28 youth experiencing homelessness in Portland, Oregon, USA. Results suggest that youth engage most frequently in service-related activities, and their activity participation is significantly associated with sense of community and psychological well-being. The utility of innovative participatory methods for better understanding the diverse experiences of homeless youth is discussed alongside examination of their practical implications. © Society for Community Research and Action 2016.

  7. GIS Application System Design Applied to Information Monitoring

    Science.gov (United States)

    Qun, Zhou; Yujin, Yuan; Yuena, Kang

    Natural environment information management system involves on-line instrument monitoring, data communications, database establishment, information management software development and so on. Its core lies in collecting effective and reliable environmental information, increasing utilization rate and sharing degree of environment information by advanced information technology, and maximizingly providing timely and scientific foundation for environmental monitoring and management. This thesis adopts C# plug-in application development and uses a set of complete embedded GIS component libraries and tools libraries provided by GIS Engine to finish the core of plug-in GIS application framework, namely, the design and implementation of framework host program and each functional plug-in, as well as the design and implementation of plug-in GIS application framework platform. This thesis adopts the advantages of development technique of dynamic plug-in loading configuration, quickly establishes GIS application by visualized component collaborative modeling and realizes GIS application integration. The developed platform is applicable to any application integration related to GIS application (ESRI platform) and can be as basis development platform of GIS application development.

  8. Spatio-temporal assessment of food safety risks in Canadian food distribution systems using GIS.

    Science.gov (United States)

    Hashemi Beni, Leila; Villeneuve, Sébastien; LeBlanc, Denyse I; Côté, Kevin; Fazil, Aamir; Otten, Ainsley; McKellar, Robin; Delaquis, Pascal

    2012-09-01

    While the value of geographic information systems (GIS) is widely applied in public health there have been comparatively few examples of applications that extend to the assessment of risks in food distribution systems. GIS can provide decision makers with strong computing platforms for spatial data management, integration, analysis, querying and visualization. The present report addresses some spatio-analyses in a complex food distribution system and defines influence areas as travel time zones generated through road network analysis on a national scale rather than on a community scale. In addition, a dynamic risk index is defined to translate a contamination event into a public health risk as time progresses. More specifically, in this research, GIS is used to map the Canadian produce distribution system, analyze accessibility to contaminated product by consumers, and estimate the level of risk associated with a contamination event over time, as illustrated in a scenario. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

  9. Mapping plant species ranges in the Hawaiian Islands: developing a methodology and associated GIS layers

    Science.gov (United States)

    Price, Jonathan P.; Jacobi, James D.; Gon, Samuel M.; Matsuwaki, Dwight; Mehrhoff, Loyal; Wagner, Warren; Lucas, Matthew; Rowe, Barbara

    2012-01-01

    This report documents a methodology for projecting the geographic ranges of plant species in the Hawaiian Islands. The methodology consists primarily of the creation of several geographic information system (GIS) data layers depicting attributes related to the geographic ranges of plant species. The most important spatial-data layer generated here is an objectively defined classification of climate as it pertains to the distribution of plant species. By examining previous zonal-vegetation classifications in light of spatially detailed climate data, broad zones of climate relevant to contemporary concepts of vegetation in the Hawaiian Islands can be explicitly defined. Other spatial-data layers presented here include the following: substrate age, as large areas of the island of Hawai'i, in particular, are covered by very young lava flows inimical to the growth of many plant species; biogeographic regions of the larger islands that are composites of multiple volcanoes, as many of their species are restricted to a given topographically isolated mountain or a specified group of them; and human impact, which can reduce the range of many species relative to where they formerly were found. Other factors influencing the geographic ranges of species that are discussed here but not developed further, owing to limitations in rendering them spatially, include topography, soils, and disturbance. A method is described for analyzing these layers in a GIS, in conjunction with a database of species distributions, to project the ranges of plant species, which include both the potential range prior to human disturbance and the projected present range. Examples of range maps for several species are given as case studies that demonstrate different spatial characteristics of range. Several potential applications of species-range maps are discussed, including facilitating field surveys, informing restoration efforts, studying range size and rarity, studying biodiversity, managing

  10. Gregoriano cadastre (1818-35) from old maps to a GIS of historical landscape data

    Science.gov (United States)

    Frazzica, V.; Galletti, F.; Orciani, M.; Colosi, L.; Cartaro, A.

    2009-04-01

    Our analysis covered specifically an area located along the "internal Marche ridge" of the Apennines, in the province of Ancona (Marche Region, Italy). The cartographical working-out for our historical analysis has been conduct drawing up maps originating from the nineteenth century Gregoriano Cadastre (Catasto Gregoriano) maps preserved in the State Archive of Rome, which have been reproduced in digital format, georeferenced and vectorialized. With the creation of a database, it has been possible to add to the maps the information gathered from the property registers concerning crop production and socioeconomic variables, in order to set up a Geographical Information System (G.I.S.). The combination of the database with the digitalized maps has allowed to create an univocal relation between each parcel and the related historical data, obtaining an information system which integrally and completely evidences the original cadastre data as a final result. It was also possible to create a three-dimensional model of the historical landscapes which permits to visualize the cultural diversification of that historical period. The integration in Territorial Information System (S.I.T.) of historical information from Gregoriano Cadastre, of socio-economic analyses concerning business changes and in parallel the study of the transformations of territorial framework, showed to be a very important instrument for the area planning, allowing to identify specific planning approaches not only for urban settlement but also for restoration of variety and complexity of agricultural landscape. The work opens further research in various directions, identifying some pilot areas which test new managerial models, foreseeing simulation of management impacts both on business profitability and landscape configuration. The future development of the project is also the upgrade and evolution of the database, followed by the acquisition of data related to the following historical periods. It

  11. New GIS approaches to wild land mapping in Europe

    Science.gov (United States)

    Steffen Fritz; Steve Carver; Linda See

    2000-01-01

    This paper outlines modifications and new approaches to wild land mapping developed specifically for the United Kingdom and European areas. In particular, national level reconnaissance and local level mapping of wild land in the UK and Scotland are presented. A national level study for the UK is undertaken, and a local study focuses on the Cairngorm Mountains in...

  12. A GIS semiautomatic tool for classifying and mapping wetland soils

    Science.gov (United States)

    Moreno-Ramón, Héctor; Marqués-Mateu, Angel; Ibáñez-Asensio, Sara

    2016-04-01

    Wetlands are one of the most productive and biodiverse ecosystems in the world. Water is the main resource and controls the relationships between agents and factors that determine the quality of the wetland. However, vegetation, wildlife and soils are also essential factors to understand these environments. It is possible that soils have been the least studied resource due to their sampling problems. This feature has caused that sometimes wetland soils have been classified broadly. The traditional methodology states that homogeneous soil units should be based on the five soil forming-factors. The problem can appear when the variation of one soil-forming factor is too small to differentiate a change in soil units, or in case that there is another factor, which is not taken into account (e.g. fluctuating water table). This is the case of Albufera of Valencia, a coastal wetland located in the middle east of the Iberian Peninsula (Spain). The saline water table fluctuates throughout the year and it generates differences in soils. To solve this problem, the objectives of this study were to establish a reliable methodology to avoid that problems, and develop a GIS tool that would allow us to define homogeneous soil units in wetlands. This step is essential for the soil scientist, who has to decide the number of soil profiles in a study. The research was conducted with data from 133 soil pits of a previous study in the wetland. In that study, soil parameters of 401 samples (organic carbon, salinity, carbonates, n-value, etc.) were analysed. In a first stage, GIS layers were generated according to depth. The method employed was Bayesian Maxim Entropy. Subsequently, it was designed a program in GIS environment that was based on the decision tree algorithms. The goal of this tool was to create a single layer, for each soil variable, according to the different diagnostic criteria of Soil Taxonomy (properties, horizons and diagnostic epipedons). At the end, the program

  13. WEB-GIS Decision Support System for CO2 storage

    Science.gov (United States)

    Gaitanaru, Dragos; Leonard, Anghel; Radu Gogu, Constantin; Le Guen, Yvi; Scradeanu, Daniel; Pagnejer, Mihaela

    2013-04-01

    Environmental decision support systems (DSS) paradigm evolves and changes as more knowledge and technology become available to the environmental community. Geographic Information Systems (GIS) can be used to extract, assess and disseminate some types of information, which are otherwise difficult to access by traditional methods. In the same time, with the help of the Internet and accompanying tools, creating and publishing online interactive maps has become easier and rich with options. The Decision Support System (MDSS) developed for the MUSTANG (A MUltiple Space and Time scale Approach for the quaNtification of deep saline formations for CO2 storaGe) project is a user friendly web based application that uses the GIS capabilities. MDSS can be exploited by the experts for CO2 injection and storage in deep saline aquifers. The main objective of the MDSS is to help the experts to take decisions based large structured types of data and information. In order to achieve this objective the MDSS has a geospatial objected-orientated database structure for a wide variety of data and information. The entire application is based on several principles leading to a series of capabilities and specific characteristics: (i) Open-Source - the entire platform (MDSS) is based on open-source technologies - (1) database engine, (2) application server, (3) geospatial server, (4) user interfaces, (5) add-ons, etc. (ii) Multiple database connections - MDSS is capable to connect to different databases that are located on different server machines. (iii)Desktop user experience - MDSS architecture and design follows the structure of a desktop software. (iv)Communication - the server side and the desktop are bound together by series functions that allows the user to upload, use, modify and download data within the application. The architecture of the system involves one database and a modular application composed by: (1) a visualization module, (2) an analysis module, (3) a guidelines module

  14. The integration of GPS, vegetation mapping and GIS in ecological and behavioural studies

    Directory of Open Access Journals (Sweden)

    Steven Mark Rutter

    2007-07-01

    Full Text Available Global Positioning System (GPS satellite navigation receivers are increasingly being used in ecological and behavioural studies to track the movements of animals in relation to the environments in which they live and forage. Concurrent recording of the animal's foraging behaviour (e.g. from jaw movement recording allows foraging locations to be determined. By combining the animal GPS movement and foraging data with habitat and vegetation maps using a Geographical Information System (GIS it is possible to relate animal movement and foraging location to landscape and habitat features and vegetation types. This powerful approach is opening up new opportunities to study the spatial aspects of animal behaviour, especially foraging behaviour, with far greater precision and objectivity than before. Advances in GPS technology now mean that sub-metre precision systems can be used to track animals, extending the range of application of this technology from landscape and habitat scale to paddock and patch scale studies. As well as allowing ecological hypotheses to be empirically tested at the patch scale, the improvements in precision are also leading to the approach being increasing extended from large scale ecological studies to smaller (paddock scale agricultural studies. The use of sub-metre systems brings both new scientific opportunities and new technological challenges. For example, fitting all of the animals in a group with sub-metre precision GPS receivers allows their relative inter-individual distances to be precisely calculated, and their relative orientations can be derived from data from a digital compass fitted to each receiver. These data, analyzed using GIS, could give new insights into the social behaviour of animals. However, the improvements in precision with which the animals are being tracked also needs equivalent improvements in the precision with which habitat and vegetation are mapped. This needs some degree of automation, as

  15. ArcCN-Runoff: An ArcGIS tool for generating curve number and runoff maps

    Science.gov (United States)

    Zhan, X.; Huang, M.-L.

    2004-01-01

    The development and the application of ArcCN-Runoff tool, an extension of ESRI@ ArcGIS software, are reported. This tool can be applied to determine curve numbers and to calculate runoff or infiltration for a rainfall event in a watershed. Implementation of GIS techniques such as dissolving, intersecting, and a curve-number reference table improve efficiency. Technical processing time may be reduced from days, if not weeks, to hours for producing spatially varied curve number and runoff maps. An application example for a watershed in Lyon County and Osage County, Kansas, USA, is presented. ?? 2004 Elsevier Ltd. All rights reserved.

  16. Geomorphodiversity derived by a GIS-based geomorphological map: case study the Czech Republic

    Czech Academy of Sciences Publication Activity Database

    Demek, J.; Kirchner, Karel; Mackovčin, P.; Slavík, P.

    2011-01-01

    Roč. 55, č. 4 (2011), s. 415-436 ISSN 0372-8854 Institutional research plan: CEZ:AV0Z30860518 Keywords : geomorphodiversity * GIS geomorphological data base * GIS-geomorphological map * Czech Republic Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 0.642, year: 2011 http://www.ingentaconnect.com/content/schweiz/zfg/2011/00000055/00000004/art00001?token=004d10697e442f2067217d763b442c233e46533f34687627504541676249266d656cbe1a808f2

  17. A positioning system for forest diseases and pests based on GIS and PTZ camera

    International Nuclear Information System (INIS)

    Wang, Z B; Zhao, F F; Wang, C B; Wang, L L

    2014-01-01

    Forest diseases and pests cause enormous economic losses and ecological damage every year in China. To prevent and control forest diseases and pests, the key is to get accurate information timely. In order to improve monitoring coverage rate and economize on manpower, a cooperative investigation model for forest diseases and pests is put forward. It is composed of video positioning system and manual labor reconnaissance with mobile GIS embedded in PDA. Video system is used to scan the disaster area, and is particularly effective on where trees are withered. Forest diseases prevention and control workers can check disaster area with PDA system. To support this investigation model, we developed a positioning algorithm and a positioning system. The positioning algorithm is based on DEM and PTZ camera. Moreover, the algorithm accuracy is validated. The software consists of 3D GIS subsystem, 2D GIS subsystem, video control subsystem and disaster positioning subsystem. 3D GIS subsystem makes positioning visual, and practically easy to operate. 2D GIS subsystem can output disaster thematic map. Video control subsystem can change Pan/Tilt/Zoom of a digital camera remotely, to focus on the suspected area. Disaster positioning subsystem implements the positioning algorithm. It is proved that the positioning system can observe forest diseases and pests in practical application for forest departments

  18. A working environment for digital planetary data processing and mapping using ISIS and GRASS GIS

    Science.gov (United States)

    Frigeri, A.; Hare, T.; Neteler, M.; Coradini, A.; Federico, C.; Orosei, R.

    2011-01-01

    Since the beginning of planetary exploration, mapping has been fundamental to summarize observations returned by scientific missions. Sensor-based mapping has been used to highlight specific features from the planetary surfaces by means of processing. Interpretative mapping makes use of instrumental observations to produce thematic maps that summarize observations of actual data into a specific theme. Geologic maps, for example, are thematic interpretative maps that focus on the representation of materials and processes and their relative timing. The advancements in technology of the last 30 years have allowed us to develop specialized systems where the mapping process can be made entirely in the digital domain. The spread of networked computers on a global scale allowed the rapid propagation of software and digital data such that every researcher can now access digital mapping facilities on his desktop. The efforts to maintain planetary missions data accessible to the scientific community have led to the creation of standardized digital archives that facilitate the access to different datasets by software capable of processing these data from the raw level to the map projected one. Geographic Information Systems (GIS) have been developed to optimize the storage, the analysis, and the retrieval of spatially referenced Earth based environmental geodata; since the last decade these computer programs have become popular among the planetary science community, and recent mission data start to be distributed in formats compatible with these systems. Among all the systems developed for the analysis of planetary and spatially referenced data, we have created a working environment combining two software suites that have similar characteristics in their modular design, their development history, their policy of distribution and their support system. The first, the Integrated Software for Imagers and Spectrometers (ISIS) developed by the United States Geological Survey

  19. GIS cartography a guide to effective map design

    CERN Document Server

    Peterson, Gretchen N

    2014-01-01

    IntroductionOn Design ExperienceConstructive CriticismWhat Is a Geoprofessional?Tick-Tock Goes the ClockWhy Good Design MattersAudienceHow to Use This BookSkipping the How-Tos to Get Straight to the Good StuffRelative Map ScalesEndnotesCreative InspirationYou Can Be CreativeDoingSeeingAn Example of How to SeeApplying All of This to Your MapSummary and Final ProddingCreative MapsA Few Places to Start Seeing Art from Your DesktopEndnotesExerciseLayout DesignAll Together NowLayout ChecklistElement Details and ExamplesStyleContextArrangementEmphasis Maps and WireframesSimplicity versus ComplexityM

  20. Solar resources and power potential mapping in Vietnam using satellite-derived and GIS-based information

    International Nuclear Information System (INIS)

    Polo, J.; Bernardos, A.; Navarro, A.A.; Fernandez-Peruchena, C.M.; Ramírez, L.; Guisado, María V.; Martínez, S.

    2015-01-01

    Highlights: • Satellite-based, reanalysis data and measurements are combined for solar mapping. • Plant output modeling for PV and CSP results in simple expressions of solar potential. • Solar resource, solar potential are used in a GIS for determine technical solar potential. • Solar resource and potential maps of Vietnam are presented. - Abstract: The present paper presents maps of the solar resources in Vietnam and of the solar potential for concentrating solar power (CSP) and for grid-connected photovoltaic (PV) technology. The mapping of solar radiation components has been calculated from satellite-derived data combined with solar radiation derived from sunshine duration and other additional sources of information based on reanalysis for several atmospheric and meteorological parameters involved. Two scenarios have been selected for the study of the solar potential: CSP Parabolic Trough of 50 MWe and grid-connected Flat Plate PV plant of around 1 MWe. For each selected scenario plant performance simulations have been computed for developing simple expressions that allow the estimation of the solar potential from the annual solar irradiation and the latitude of every site in Vietnam. Finally, Geographic Information Systems (GIS) have been used for combining the solar potential with the land availability according each scenario to deliver the technical solar potential maps of Vietnam

  1. 77 FR 69899 - Public Conference on Geographic Information Systems (GIS) in Transportation Safety

    Science.gov (United States)

    2012-11-21

    ... NATIONAL TRANSPORTATION SAFETY BOARD Public Conference on Geographic Information Systems (GIS) in... Geographic Information Systems (GIS) in transportation safety on December 4-5, 2012. GIS is a rapidly... visualization of data. The meeting will bring researchers and practitioners in transportation safety and GIS...

  2. Development of Inundation Map for Hypothetical Asa Dam Break using HEC-RAS and ARC GIS

    Directory of Open Access Journals (Sweden)

    O. S. Balogun

    2017-12-01

    Full Text Available Asa Dam in Ilorin, Nigeria was constructed in the1980s. The dam made of earth material has a length of 507 meters and height of 27 meters. The maximum capacity of the impoundment during the raining season is approximately 43 x 106 m3. Years after construction, tremendous physical development is taking place along the river channel starting from the dam axis towards downstream for a distance of approximately 12 km. It is estimated that several thousands of people are currently living and performing various activities within the vicinity of the river channel. It is therefore necessary to evaluate the risk involved in case of a possible dam break disaster. In view of this, a hypothetical dam break scenario was studied and analyzed using Hydrologic Engineering Center’s River Analysis System computer model. Unsteady flow simulation was performed using geometric data obtained from Digital Terrain Model with 100-year, 24 hr flow event. The HEC-RAS was used in concert with HEC-GeoRAS to assess the flood hazard along the approximately 12 km river channel. The simulated water surface elevations were exported to Arc GIS to produce an inundation map that graphically indicates the extent of the flood hazard. The results show that some important locations such as industrial, residential, motor parks, recreational and places of worship along the river length are prone to significant flood impact. This map serves as an input for emergency preparation programme in the event of the dam break.

  3. Mapping Unhealthy Behavior Among Economically Active Men Using GIS in Suburban and Rural Areas of Sri Lanka

    Science.gov (United States)

    Silva, J Padmaka; Gunathunga, M W; Jayasinghe, S

    2016-01-01

    The burden of noncommunicable diseases (NCDs) and certain behavioral risk factors related to NCDs (unhealthy behaviors) are becoming more common. This survey aims to map out such common unhealthy behaviors among all men 35 to 50 years old in a Medical Officer of Health area in the Western Province of Sri Lanka using a geographical information system (GIS) and an interviewer administered questionnaire by visiting all households in the study area. Data were analyzed with ARC GIS and SPSS software. Geographical areas where men with unhealthy behaviors cluster together (clusters) were identified and visually and statistically related to locations of schools, places of religious worship, and factories in the area. It was revealed that clusters of unhealthy behaviors are mostly seen in areas with less population density. Smoking and alcohol are clustering in estate areas occupied by Tamils. This way GIS mapping could be used to identify and reduce the burden of NCDs by visualizing clusters and how certain locations affect their spread. PMID:26489433

  4. The Distribution of Heavy Metal Pollutants in Suez Bay Using Geographic Information System (GIS)

    International Nuclear Information System (INIS)

    Hassan, H.B.; Mohamed, W.M.

    2017-01-01

    Suez city represents the southern entrance of the Suez Canal. As a result of the rapid development of industrialization and anthropogenic activities of Suez city may be entered containments such as heavy metals through Suez bay boundaries. The geographical information system (Arc GIS 9.1) is used to study the spatial distribution of heavy metals concentrations (Cd, Mn, Fe, Ni, Pb, Cu and Zn) of water samples which were collected in four different sampling sites (I, II, III and IV) from Suez bay. In this study, tabular data representation of the spatial distribution was developed using the inverse distance weighted (IDW) interpolation method. The GIS technique was applied to transfer the information into a final map illustrating the spatial distribution of heavy metals within the studied area. GIS models showed the high concentrations of heavy metals in some sites in the Suez city affecting by their activities. An overall distribution map of heavy metals is observed from GIS special analysis. Site (IV) in Suez City demonstrated the highest polluted are a in the overall distribution map

  5. Estimating hurricane hazards using a GIS system

    Directory of Open Access Journals (Sweden)

    A. Taramelli

    2008-08-01

    Full Text Available This paper develops a GIS-based integrated approach to the Multi-Hazard model method, with reference to hurricanes. This approach has three components: data integration, hazard assessment and score calculation to estimate elements at risk such as affected area and affected population. First, spatial data integration issues within a GIS environment, such as geographical scales and data models, are addressed. Particularly, the integration of physical parameters and population data is achieved linking remotely sensed data with a high resolution population distribution in GIS. In order to assess the number of affected people, involving heterogeneous data sources, the selection of spatial analysis units is basic. Second, specific multi-hazard tasks, such as hazard behaviour simulation and elements at risk assessment, are composed in order to understand complex hazard and provide support for decision making. Finally, the paper concludes that the integrated approach herein presented can be used to assist emergency management of hurricane consequences, in theory and in practice.

  6. Mapping of Landscape Cover Using Remote Sensing and GIS in ...

    African Journals Online (AJOL)

    Humankind to fulfill its needs has put natural resources of the earth to a severe pressure. The rate of degradation and depletion of earth resources has accelerated tremendously in view of the overincreasing demographic pressure. Therefore, mapping of landscape cover types to evaluate it has been a great concern for ...

  7. Artificial groundwater recharge zones mapping using remote sensing and GIS: a case study in Indian Punjab.

    Science.gov (United States)

    Singh, Amanpreet; Panda, S N; Kumar, K S; Sharma, Chandra Shekhar

    2013-07-01

    Artificial groundwater recharge plays a vital role in sustainable management of groundwater resources. The present study was carried out to identify the artificial groundwater recharge zones in Bist Doab basin of Indian Punjab using remote sensing and geographical information system (GIS) for augmenting groundwater resources. The study area has been facing severe water scarcity due to intensive agriculture for the past few years. The thematic layers considered in the present study are: geomorphology (2004), geology (2004), land use/land cover (2008), drainage density, slope, soil texture (2000), aquifer transmissivity, and specific yield. Different themes and related features were assigned proper weights based on their relative contribution to groundwater recharge. Normalized weights were computed using the Saaty's analytic hierarchy process. Thematic layers were integrated in ArcGIS for delineation of artificial groundwater recharge zones. The recharge map thus obtained was divided into four zones (poor, moderate, good, and very good) based on their influence to groundwater recharge. Results indicate that 15, 18, 37, and 30 % of the study area falls under "poor," "moderate," "good," and "very good" groundwater recharge zones, respectively. The highest recharge potential area is located towards western and parts of middle region because of high infiltration rates caused due to the distribution of flood plains, alluvial plain, and agricultural land. The least effective recharge potential is in the eastern and middle parts of the study area due to low infiltration rate. The results of the study can be used to formulate an efficient groundwater management plan for sustainable utilization of limited groundwater resources.

  8. GIS-based soil liquefaction susceptibility map of Mumbai city for earthquake events

    Science.gov (United States)

    Mhaske, Sumedh Yamaji; Choudhury, Deepankar

    2010-03-01

    The problem of liquefaction of soil during seismic event is one of the important topics in the field of Geotechnical Earthquake Engineering. Liquefaction of soil is generally occurs in loose cohesionless saturated soil when pore water pressure increases suddenly due to induced ground motion and shear strength of soil decreases to zero and leading the structure situated above to undergo a large settlement, or failure. The failures took place due to liquefaction induced soil movement spread over few square km area continuously. Hence this is a problem where spatial variation involves and to represent this spatial variation Geographic Information System (GIS) is very useful in decision making about the area subjected to liquefaction. In this paper, GIS software GRAM++ is used to prepare soil liquefaction susceptibility map for entire Mumbai city in India by marking three zones viz. critically liquefiable soil, moderately liquefiable soil and non liquefiable soil. Extensive field borehole test data for groundwater depth, standard penetration test (SPT) blow counts, dry density, wet density and specific gravity, etc. have been collected from different parts of Mumbai. Simplified procedure of Youd et al. (2001) is used for calculation of factor of safety against soil liquefaction potential. Mumbai city and suburban area are formed by reclaiming lands around seven islands since 1865 till current date and still it is progressing in the area such as Navi Mumbai and beyond Borivali to Mira road suburban area. The factors of safety against soil liquefaction were determined for earthquake moment magnitude ranging from Mw = 5.0 to 7.5. It is found that the areas like Borivali, Malad, Dahisar, Bhandup may prone to liquefaction for earthquake moment magnitude ranging from Mw = 5.0 to 7.5. The liquefaction susceptibility maps were created by using GRAM++ by showing the areas where the factor of safety against the soil liquefaction is less than one. Proposed liquefaction

  9. Geographic Information System (GIS) Emergency Support for the May 2000 Cerro Grande Wildfire, Los Alamos, New Mexico, USA

    Energy Technology Data Exchange (ETDEWEB)

    C.R.Mynard; G.N.Keating; P.M.Rich; D.R. Bleakly

    2003-05-01

    In May 2000 the Cerro Grande wildfire swept through Los Alamos, New Mexico, burning approximately 17,400 ha (43,000 acres) and causing evacuation of Los Alamos National Laboratory (LANL) and the communities of Los Alamos and White Rock. An integral part of emergency response during the fire was the use of geographic information system (GIS) technology, which continues to be used in support of post-fire restoration and environmental monitoring. During the fire Laboratory GIS staff and volunteers from other organizations worked to produce maps and provide support for emergency managers, including at an emergency GIS facility in Santa Fe. Subsequent to the fire, Laboratory GIS teams supported the multiagency Burned Area Emergency Rehabilitation (BAER) team to provide GIS data and maps for planning mitigation efforts. The GIS teams continue to help researchers, operations personnel, and managers deal with the tremendous changes caused by the fire. Much of the work is under the auspices of the Cerro Grande Rehabilitation Project (CGRP) to promote recovery from fire damage, improve information exchange, enhance emergency management, and conduct mitigation activities. GIS efforts during the fire provided important lessons about institutional matters, working relationships, and emergency preparedness. These lessons include the importance of (1) an integrated framework for assessing natural and human hazards in a landscape context; (2) a strong GIS capability for emergency response; (3) coordinated emergency plans for GIS operations; (4) a method for employees to report their whereabouts and receive authoritative information during an evacuation; (5) GIS data that are complete, backed-up, and available during an emergency; (6) adaptation of GIS to the circumstances of the emergency; (7) better coordination in the GIS community; (8) better integration of GIS into LANL operations; and (9) a central data warehouse for data and metadata. These lessons are important for planning

  10. Mapping of biodiversity in the Mumbai port using GIS

    Digital Repository Service at National Institute of Oceanography (India)

    Suryanarayana, A.; Joglekar, V.V.

    and infrastructure features along with the coastal habitats and resources. For clarity and convenience of data management and display, each type of data is shown in different layers. Inputs, Raw Data Computer Database Output... are added to the tool bar provided in Arc View, to provide an interface for the database running at the backend. Using these tools, the data are queried directly for the database or on the map. The distribution of species, physical and chemical parameters...

  11. Operational SAR Data Processing in GIS Environments for Rapid Disaster Mapping

    Science.gov (United States)

    Bahr, Thomas

    2014-05-01

    The use of SAR data has become increasingly popular in recent years and in a wide array of industries. Having access to SAR can be highly important and critical especially for public safety. Updating a GIS with contemporary information from SAR data allows to deliver a reliable set of geospatial information to advance civilian operations, e.g. search and rescue missions. SAR imaging offers the great advantage, over its optical counterparts, of not being affected by darkness, meteorological conditions such as clouds, fog, etc., or smoke and dust, frequently associated with disaster zones. In this paper we present the operational processing of SAR data within a GIS environment for rapid disaster mapping. For this technique we integrated the SARscape modules for ENVI with ArcGIS®, eliminating the need to switch between software packages. Thereby the premier algorithms for SAR image analysis can be directly accessed from ArcGIS desktop and server environments. They allow processing and analyzing SAR data in almost real time and with minimum user interaction. This is exemplified by the November 2010 flash flood in the Veneto region, Italy. The Bacchiglione River burst its banks on Nov. 2nd after two days of heavy rainfall throughout the northern Italian region. The community of Bovolenta, 22 km SSE of Padova, was covered by several meters of water. People were requested to stay in their homes; several roads, highways sections and railroads had to be closed. The extent of this flooding is documented by a series of Cosmo-SkyMed acquisitions with a GSD of 2.5 m (StripMap mode). Cosmo-SkyMed is a constellation of four Earth observation satellites, allowing a very frequent coverage, which enables monitoring using a very high temporal resolution. This data is processed in ArcGIS using a single-sensor, multi-mode, multi-temporal approach consisting of 3 steps: (1) The single images are filtered with a Gamma DE-MAP filter. (2) The filtered images are geocoded using a reference

  12. Mapping eco-environmental vulnerability patterns: An assessment framework based on remote sensing, GIS, and AHP

    Science.gov (United States)

    Anh, N. K.; Liou, Y. A.; Li, M. H.

    2016-12-01

    The motivation for this study is assessment of the eco-environment vulnerability based on four independent determinants: hydro-meteorology, topography, land resources, and human activities. An assessment framework is proposed to assess the vulnerable eco-environment by using 16 variables with 6 of them constructed from Landsat 8 satellite images. The remaining variables were extracted from digital maps. Each variable was evaluated and spatially mapped with the aid of an analytical hierarchy process (AHP) and geographical information system (GIS). The Thua Thien - Hue Province that has been experiencing natural disasters and urbanization in the recent decades is selected as our study area. An eco-environmental vulnerability map is assorted into six vulnerable levels consisting of potential, slight, light, medium, heavy, and very heavy vulnerabilities, representing 14%, 27%, 17%, 26%, 13%, 3% of the study area, respectively. It is found that heavy and very heavy vulnerable areas appear mainly in the low and medium lands with high intensification of social-economic activities and often suffer from flooding. Tiny percentages of medium and heavy vulnerable levels occur in high land areas probably caused by agricultural practices in highlands, slash and burn cultivation and removal of natural forests with new plantation forests and these regions are usually influenced by landslides, flash flooding. Based on our results, three ecological zones requiring different development and protection solutions are proposed to restore local eco-environment toward sustainable development. Our findings support the idea that eco-environmental vulnerability is driven by anthropogenic processes and enhanced by natural disaster in the Thua Thien-Hue Province.

  13. Mapping Urban Heat Demand with the Use of GIS-Based Tools

    Directory of Open Access Journals (Sweden)

    Artur Wyrwa

    2017-05-01

    Full Text Available This article presents a bottom-up approach for calculation of the useful heat demand for space heating and hot water preparation using geo-referenced datasets for buildings at the city level. This geographic information system (GIS based approach was applied in the case study for the city of Krakow, where on the one hand the district heat network is well developed, while on the other hand there are still substantial number of buildings burning solid fuels in individual boilers and stoves, causing air pollution. The calculated heat demand was aggregated in the grid with 100 m × 100 m spatial resolution to deliver the heat map depicting the current situation for 21 buildings types. The results show that the residential buildings, in particular one- and multi-family buildings, have the highest share in overall demand for heat. By combining the results with location of the district heat (DH network, the potential areas in its close vicinity that have sufficient heat demand density for developing the net were pointed out. Future evolution in heat demand for space heating in one-family houses was evaluated with the use of deterministic method employing building stock model. The study lays a foundation for planning the development of the heating system at the city level.

  14. Landslide susceptibility mapping along PLUS expressways in Malaysia using probabilistic based model in GIS

    Science.gov (United States)

    Yusof, Norbazlan M.; Pradhan, Biswajeet

    2014-06-01

    PLUS Berhad holds the concession for a total of 987 km of toll expressways in Malaysia, the longest of which is the North-South Expressway or NSE. Acting as the backbone' of the west coast of the peninsula, the NSE stretches from the Malaysian-Thai border in the north to the border with neighbouring Singapore in the south, linking several major cities and towns along the way. North-South Expressway in Malaysia contributes to the country economic development through trade, social and tourism sector. Presently, the highway is good in terms of its condition and connection to every state but some locations need urgent attention. Stability of slopes at these locations is of most concern as any instability can cause danger to the motorist. In this paper, two study locations have been analysed; they are Gua Tempurung (soil slope) and Jelapang (rock slope) which are obviously having two different characteristics. These locations passed through undulating terrain with steep slopes where landslides are common and the probability of slope instability due to human activities in surrounding areas is high. A combination of twelve (12) landslide conditioning factors database on slope stability such as slope degree and slope aspect were extracted from IFSAR (interoferometric synthetic aperture radar) while landuse, lithology and structural geology were constructed from interpretation of high resolution satellite data from World View II, Quickbird and Ikonos. All this information was analysed in geographic information system (GIS) environment for landslide susceptibility mapping using probabilistic based frequency ratio model. Consequently, information on the slopes such as inventories, condition assessments and maintenance records were assessed through total expressway maintenance management system or better known as TEMAN. The above mentioned system is used by PLUS as an asset management and decision support tools for maintenance activities along the highways as well as for data

  15. Landslide susceptibility mapping along PLUS expressways in Malaysia using probabilistic based model in GIS

    International Nuclear Information System (INIS)

    Yusof, Norbazlan M; Pradhan, Biswajeet

    2014-01-01

    PLUS Berhad holds the concession for a total of 987 km of toll expressways in Malaysia, the longest of which is the North-South Expressway or NSE. Acting as the backbone' of the west coast of the peninsula, the NSE stretches from the Malaysian-Thai border in the north to the border with neighbouring Singapore in the south, linking several major cities and towns along the way. North-South Expressway in Malaysia contributes to the country economic development through trade, social and tourism sector. Presently, the highway is good in terms of its condition and connection to every state but some locations need urgent attention. Stability of slopes at these locations is of most concern as any instability can cause danger to the motorist. In this paper, two study locations have been analysed; they are Gua Tempurung (soil slope) and Jelapang (rock slope) which are obviously having two different characteristics. These locations passed through undulating terrain with steep slopes where landslides are common and the probability of slope instability due to human activities in surrounding areas is high. A combination of twelve (12) landslide conditioning factors database on slope stability such as slope degree and slope aspect were extracted from IFSAR (interoferometric synthetic aperture radar) while landuse, lithology and structural geology were constructed from interpretation of high resolution satellite data from World View II, Quickbird and Ikonos. All this information was analysed in geographic information system (GIS) environment for landslide susceptibility mapping using probabilistic based frequency ratio model. Consequently, information on the slopes such as inventories, condition assessments and maintenance records were assessed through total expressway maintenance management system or better known as TEMAN. The above mentioned system is used by PLUS as an asset management and decision support tools for maintenance activities along the highways as well as for

  16. A WebGIS-based system for analyzing and visualizing air quality data for Shanghai Municipality

    Science.gov (United States)

    Wang, Manyi; Liu, Chaoshun; Gao, Wei

    2014-10-01

    An online visual analytical system based on Java Web and WebGIS for air quality data for Shanghai Municipality was designed and implemented to quantitatively analyze and qualitatively visualize air quality data. By analyzing the architecture of WebGIS and Java Web, we firstly designed the overall scheme for system architecture, then put forward the software and hardware environment and also determined the main function modules for the system. The visual system was ultimately established with the DIV + CSS layout method combined with JSP, JavaScript, and some other computer programming languages based on the Java programming environment. Moreover, Struts, Spring, and Hibernate frameworks (SSH) were integrated in the system for the purpose of easy maintenance and expansion. To provide mapping service and spatial analysis functions, we selected ArcGIS for Server as the GIS server. We also used Oracle database and ESRI file geodatabase to store spatial data and non-spatial data in order to ensure the data security. In addition, the response data from the Web server are resampled to implement rapid visualization through the browser. The experimental successes indicate that this system can quickly respond to user's requests, and efficiently return the accurate processing results.

  17. Specialized mining GIS system MineGIS SMZ Jelšava

    Directory of Open Access Journals (Sweden)

    Peter Sasvári

    2005-12-01

    Full Text Available Following, the real needs for new mining information system requested by SMZ Jelšava, the Department of Mineral Deposits and Applied Geology (KLaAG at the Technical University of Košice (TUKE has prepared a specification for the specialized mining geographic information system called MineGIS SMZ Jelšava. The main roles of the new system have been defined as follows of reserves: the administration, analyse and the visualization of all mining geo-data related to the estimation.

  18. GIS-based interactive tool to map the advent of world conquerors

    Science.gov (United States)

    Lakkaraju, Mahesh

    The objective of this thesis is to show the scale and extent of some of the greatest empires the world has ever seen. This is a hybrid project between the GIS based interactive tool and the web-based JavaScript tool. This approach lets the students learn effectively about the emperors themselves while understanding how long and far their empires spread. In the GIS based tool, a map is displayed with various points on it, and when a user clicks on one point, the relevant information of what happened at that particular place is displayed. Apart from this information, users can also select the interactive animation button and can walk through a set of battles in chronological order. As mentioned, this uses Java as the main programming language, and MOJO (Map Objects Java Objects) provided by ESRI. MOJO is very effective as its GIS related features can be included in the application itself. This app. is a simple tool and has been developed for university or high school level students. D3.js is an interactive animation and visualization platform built on the Javascript framework. Though HTML5, CSS3, Javascript and SVG animations can be used to derive custom animations, this tool can help bring out results with less effort and more ease of use. Hence, it has become the most sought after visualization tool for multiple applications. D3.js has provided a map-based visualization feature so that we can easily display text-based data in a map-based interface. To draw the map and the points on it, D3.js uses data rendered in TOPO JSON format. The latitudes and longitudes can be provided, which are interpolated into the Map svg. One of the main advantages of doing it this way is that more information is retained when we use a visual medium.

  19. Geonucleus, the freeware application for managing geological mapping data in GIS

    Science.gov (United States)

    Albert, Gáspár

    2016-04-01

    Geological mapping is the most traditional way of collecting information from the deposits and rocks. The traditional technique of the documentation was refined by generations of geologists. These traditions were implemented into Geonucleus to create a tool for precise data-recording after fieldwork, but giving the freedom of pondering the details of the observation as well. In 2012 a general xml-based data structure was worked out for storing field observations for the Geological Institute of Hungary (Albert et al. 2012). This structure was implemented into the desktop version of Geonucleus, which creates a database of the recorded data on the client computer. The application saves the complete database in one file, which can be loaded into a GIS. The observations can be saved in simple text format as well, but primarily the kml (Keyhole Markup Languege) is supported. This way, the observations are visualized in comprehensible forms (e.g. on a 3D surface model with satellite photos in Google Earth). If the kml is directly visualized in Google Earth, an info-bubble will appear via clicking on a pinpoint. It displays all the metadata (e.g. index, coordinates, date, logger name, etc.), the descriptions and the photos of the observed site. If a more general GIS application is the aim (e.g. Global Mapper or QGIS), the file can be saved in a different format, but still in a kml-structure. The simple text format is recommended if the observations are to be imported in a user-defined relational database system (RDB). Report text-type is also available if a detailed description of one or more observed site is needed. Importing waypoint gpx-files can quicken the logging. The code was written in VisualBasic.Net. The app is freely accessible from the geonucleus.elte.hu site and it can be installed on any system, which has the .Net framework 4.0 or higher. The software is bilingual (English and Hungarian), and the app is designed for general geological mapping purposes (e

  20. The use of Geographic Information System (GIS) and non-GIS methods to assess the external validity of samples postcollection.

    Science.gov (United States)

    Richardson, Esther; Good, Margaret; McGrath, Guy; More, Simon J

    2009-09-01

    External validity is fundamental to veterinary diagnostic investigation, reflecting the accuracy with which sample results can be extrapolated to a broader population of interest. Probability sampling methods are routinely used during the collection of samples from populations, specifically to maximize external validity. Nonprobability sampling (e.g., of blood samples collected as part of routine surveillance programs or laboratory submissions) may provide useful data for further posthoc epidemiological analysis, adding value to the collection and submission of samples. As the sample has already been submitted, the analyst or investigator does not have any control over the sampling methodology, and hence external validity as routine probability sampling methods may not have been employed. The current study describes several Geographic Information System (GIS) and non-GIS methods, applied posthoc, to assess the external validity of samples collected using both probability and nonprobability sampling methods. These methods could equally be employed for inspecting other datasets. Mapping was conducted using ArcView 9.1. Based on this posthoc assessment, results from the random field sample could provide an externally valid, albeit relatively imprecise, estimate of national disease prevalence, of disease prevalence in 3 of the 4 provinces (all but Ulster, in the north and northwest, where sample size was small), and in beef and dairy herds. This study provides practical methods for examining the external validity of samples postcollection.

  1. An uncertainty and sensitivity analysis approach for GIS-based multicriteria landslide susceptibility mapping

    Science.gov (United States)

    Feizizadeh, Bakhtiar; Blaschke, Thomas

    2014-01-01

    GIS-based multicriteria decision analysis (MCDA) methods are increasingly being used in landslide susceptibility mapping. However, the uncertainties that are associated with MCDA techniques may significantly impact the results. This may sometimes lead to inaccurate outcomes and undesirable consequences. This article introduces a new GIS-based MCDA approach. We illustrate the consequences of applying different MCDA methods within a decision-making process through uncertainty analysis. Three GIS-MCDA methods in conjunction with Monte Carlo simulation (MCS) and Dempster–Shafer theory are analyzed for landslide susceptibility mapping (LSM) in the Urmia lake basin in Iran, which is highly susceptible to landslide hazards. The methodology comprises three stages. First, the LSM criteria are ranked and a sensitivity analysis is implemented to simulate error propagation based on the MCS. The resulting weights are expressed through probability density functions. Accordingly, within the second stage, three MCDA methods, namely analytical hierarchy process (AHP), weighted linear combination (WLC) and ordered weighted average (OWA), are used to produce the landslide susceptibility maps. In the third stage, accuracy assessments are carried out and the uncertainties of the different results are measured. We compare the accuracies of the three MCDA methods based on (1) the Dempster–Shafer theory and (2) a validation of the results using an inventory of known landslides and their respective coverage based on object-based image analysis of IRS-ID satellite images. The results of this study reveal that through the integration of GIS and MCDA models, it is possible to identify strategies for choosing an appropriate method for LSM. Furthermore, our findings indicate that the integration of MCDA and MCS can significantly improve the accuracy of the results. In LSM, the AHP method performed best, while the OWA reveals better performance in the reliability assessment. The WLC

  2. A multifaceted comparison of ArcGIS and MapMarker for automated geocoding

    Directory of Open Access Journals (Sweden)

    Sanjaya Kumar

    2012-11-01

    Full Text Available Geocoding is increasingly being used for public health surveillance and spatial epidemiology studies. Public health departments in the United States of America (USA often use this approach to investigate disease outbreaks and clusters or assign health records to appropriate geographic units. We evaluated two commonly used geocoding software packages, ArcGIS and MapMarker, for automated geocoding of a large number of residential addresses from health administrative data in New York State, USA to better understand their features, performance and limitations. The comparison was based on three metrics of evaluation: completeness (or match rate, geocode similarity and positional accuracy. Of the 551,798 input addresses, 318,302 (57.7% were geocoded by MapMarker and 420,813 (76.3% by the ArcGIS composite address locator. High similarity between the geocodes assigned by the two methods was found, especially in suburban and urban areas. Among addresses with a distance of greater than 100 m between the geocodes assigned by the two packages, the point assigned by ArcGIS was closer to the associated parcel centroid (“true” location compared with that assigned by MapMarker. In addition, the composite address locator in ArcGIS allows users to fully utilise available reference data, which consequently results in better geocoding results. However, the positional differences found were minimal, and a large majority of addresses were placed on the same locations by both geocoding packages. Using both methods and combining the results can maximise match rates and save the time needed for manual geocoding.

  3. A multifaceted comparison of ArcGIS and MapMarker for automated geocoding.

    Science.gov (United States)

    Kumar, Sanjaya; Liu, Ming; Hwang, Syni-An

    2012-11-01

    Geocoding is increasingly being used for public health surveillance and spatial epidemiology studies. Public health departments in the United States of America (USA) often use this approach to investigate disease outbreaks and clusters or assign health records to appropriate geographic units. We evaluated two commonly used geocoding software packages, ArcGIS and MapMarker, for automated geocoding of a large number of residential addresses from health administrative data in New York State, USA to better understand their features, performance and limitations. The comparison was based on three metrics of evaluation: completeness (or match rate), geocode similarity and positional accuracy. Of the 551,798 input addresses, 318,302 (57.7%) were geocoded by MapMarker and 420,813 (76.3%) by the ArcGIS composite address locator. High similarity between the geocodes assigned by the two methods was found, especially in suburban and urban areas. Among addresses with a distance of greater than 100 m between the geocodes assigned by the two packages, the point assigned by ArcGIS was closer to the associated parcel centroid ("true" location) compared with that assigned by MapMarker. In addition, the composite address locator in ArcGIS allows users to fully utilise available reference data, which consequently results in better geocoding results. However, the positional differences found were minimal, and a large majority of addresses were placed on the same locations by both geocoding packages. Using both methods and combining the results can maximise match rates and save the time needed for manual geocoding.

  4. A GIS support system for declaration and verification

    International Nuclear Information System (INIS)

    Poucet, A.; Contini, S.; Bellezza, F.

    2001-01-01

    Full text: The timely detection of a diversion of a significant amount of nuclear material from the civil cycle represents a complex activity that requires the use of powerful support systems. In this field the authors developed SIT (Safeguards Inspection Tool), an integrated platform for collecting, managing and analysing data from a variety of sources to support declarations and verification activities. Information dealt with is that requested by both INFCIRC/153 and INFCIRC/540 protocols. SIT is based on a low-cost Geographic Information System platform and extensive use is made of commercial software to reduce maintenance costs. The system has been developed using ARCVIEW GIS for Windows NT platforms. SIT is conceived as an integrator of multimedia information stored into local and remote databases; efforts have been focused on the automation of several tasks in order to produce a user-friendly system. Main characteristics of SIT are: Capability to deal with multimedia data, e.g. text, images, video, using user-selected COTS; Easy access to external databases, e.g. Oracle, Informix, Sybase, MS-Access, directly from the site map; Selected access to open source information via Internet; Capability to easily geo-reference site maps, to generate thematic layers of interest and to perform spatial analysis; Capability of performing aerial and satellite image analysis operations, e.g. rectification, change detection, feature extraction; Capability to easily add and run external models for e.g. material data accounting, completeness check, air dispersion models, material flow graph generation and to describe results in graphical form; Capability to use a Geo-positioning systems (GPS) with a portable computer, SIT is at an advanced stage of development and will be very soon interfaced with VERITY, a powerful Web search engine in order to allow open source information retrieval from geographical maps. The paper will describe the main features of SIT and the advantages of

  5. A GIS support system for declaration and verification

    Energy Technology Data Exchange (ETDEWEB)

    Poucet, A; Contini, S; Bellezza, F [European Commission, Joint Research Centre, Institute for Systems Informatics and Safety (ISIS), Ispra (Italy)

    2001-07-01

    Full text: The timely detection of a diversion of a significant amount of nuclear material from the civil cycle represents a complex activity that requires the use of powerful support systems. In this field the authors developed SIT (Safeguards Inspection Tool), an integrated platform for collecting, managing and analysing data from a variety of sources to support declarations and verification activities. Information dealt with is that requested by both INFCIRC/153 and INFCIRC/540 protocols. SIT is based on a low-cost Geographic Information System platform and extensive use is made of commercial software to reduce maintenance costs. The system has been developed using ARCVIEW GIS for Windows NT platforms. SIT is conceived as an integrator of multimedia information stored into local and remote databases; efforts have been focused on the automation of several tasks in order to produce a user-friendly system. Main characteristics of SIT are: Capability to deal with multimedia data, e.g. text, images, video, using user-selected COTS; Easy access to external databases, e.g. Oracle, Informix, Sybase, MS-Access, directly from the site map; Selected access to open source information via Internet; Capability to easily geo-reference site maps, to generate thematic layers of interest and to perform spatial analysis; Capability of performing aerial and satellite image analysis operations, e.g. rectification, change detection, feature extraction; Capability to easily add and run external models for e.g. material data accounting, completeness check, air dispersion models, material flow graph generation and to describe results in graphical form; Capability to use a Geo-positioning systems (GPS) with a portable computer, SIT is at an advanced stage of development and will be very soon interfaced with VERITY, a powerful Web search engine in order to allow open source information retrieval from geographical maps. The paper will describe the main features of SIT and the advantages of

  6. Harnessing Geographic Information Systems (GIS) to enable community-oriented primary care.

    Science.gov (United States)

    Bazemore, Andrew; Phillips, Robert L; Miyoshi, Thomas

    2010-01-01

    Despite growing acceptance and implementation of geographic information systems (GIS) in the public health arena, its utility for clinical population management and coordination by leaders in a primary care clinical health setting has been neither fully realized nor evaluated. In a primary care network of clinics charged with caring for vulnerable urban communities, we used GIS to (1) integrate and analyze clinical (practice management) data and population (census) data and (2) generate distribution, service area, and population penetration maps of those clinics. We then conducted qualitative evaluation of the responses of primary care clinic leaders, administrators, and community board members to analytic mapping of their clinic and regional population data. Practice management data were extracted, geocoded, and mapped to reveal variation between actual clinical service areas and the medically underserved areas for which these clinics received funding, which was surprising to center leaders. In addition, population penetration analyses were performed to depict patterns of utilization. Qualitative assessments of staff response to the process of mapping clinical and population data revealed enthusiastic engagement in the process, which led to enhanced community comprehension, new ideas about data use, and an array of applications to improve their clinical revenue. However, they also revealed barriers to further adoption, including time, expense, and technical expertise, which could limit the use of GIS and mapping unless economies of scale across clinics, the use of web technology, and the availability of dynamic mapping tools could be realized. Analytic mapping was enthusiastically received and practically applied in the primary care setting, and was readily comprehended by clinic leaders for innovative purposes. This is a tool of particular relevance amid primary care safety-net expansion and increased funding of health information technology diffusion in these

  7. Real-time Geographic Information System (GIS) for Monitoring the Area of Potential Water Level Using Rule Based System

    Science.gov (United States)

    Anugrah, Wirdah; Suryono; Suseno, Jatmiko Endro

    2018-02-01

    Management of water resources based on Geographic Information System can provide substantial benefits to water availability settings. Monitoring the potential water level is needed in the development sector, agriculture, energy and others. In this research is developed water resource information system using real-time Geographic Information System concept for monitoring the potential water level of web based area by applying rule based system method. GIS consists of hardware, software, and database. Based on the web-based GIS architecture, this study uses a set of computer that are connected to the network, run on the Apache web server and PHP programming language using MySQL database. The Ultrasound Wireless Sensor System is used as a water level data input. It also includes time and geographic location information. This GIS maps the five sensor locations. GIS is processed through a rule based system to determine the level of potential water level of the area. Water level monitoring information result can be displayed on thematic maps by overlaying more than one layer, and also generating information in the form of tables from the database, as well as graphs are based on the timing of events and the water level values.

  8. Real-Time Implementation of a GIS-Based Localization System for Intelligent Vehicles

    Directory of Open Access Journals (Sweden)

    Philippe Bonnifait

    2007-07-01

    Full Text Available This paper presents a loosely coupled fusion approach that merges GPS data, dead-reckoned sensors, and GIS (geographical information system data. The GPS latency is compensated for by the DR sensors and the use of an xPPS signal. The fusion of the estimate with the map data is spatial-triggered, while the fusion with the GPS is time-triggered. We present a strategy that relies on pose tracking which is reinitialized when GPS data become incoherent. Particular attention is given to the representation of the road map and to the management of a cache memory for efficiency purposes. We report experiments carried out with our equipped car and a GIS whose characteristics are well adapted to embedded constraints.

  9. Real-Time Implementation of a GIS-Based Localization System for Intelligent Vehicles

    Directory of Open Access Journals (Sweden)

    Bonnifait Philippe

    2007-01-01

    Full Text Available This paper presents a loosely coupled fusion approach that merges GPS data, dead-reckoned sensors, and GIS (geographical information system data. The GPS latency is compensated for by the DR sensors and the use of an xPPS signal. The fusion of the estimate with the map data is spatial-triggered, while the fusion with the GPS is time-triggered. We present a strategy that relies on pose tracking which is reinitialized when GPS data become incoherent. Particular attention is given to the representation of the road map and to the management of a cache memory for efficiency purposes. We report experiments carried out with our equipped car and a GIS whose characteristics are well adapted to embedded constraints.

  10. Landslide early warning system prototype with GIS analysis indicates by soil movement and rainfall

    Science.gov (United States)

    Artha, Y.; Julian, E. S.

    2018-01-01

    The aim of this paper is developing and testing of landslide early warning system. The early warning system uses accelerometersas ground movement and tilt-sensing device and a water flow sensor. A microcentroller is used to process the input signal and activate the alarm. An LCD is used to display the acceleration in x,y and z axis. When the soil moved or shifted and rainfall reached 100 mm/day, the alarm rang and signal were sentto the monitoring center via a telemetry system.Data logging information and GIS spatial data can be monitored remotely as tables and graphics as well as in the form of geographical map with the help of web-GIS interface. The system were tested at Kampung Gerendong, Desa Putat Nutug, Kecamatan Ciseeng, Kabupaten Bogor. This area has 3.15 cumulative score, which mean vulnerable to landslide. The results show that the early warning system worked as planned.

  11. The application of geographic information systems (GIS) in the ...

    African Journals Online (AJOL)

    A large amount of data is usually generated during environmental monitoring programmes. The data need to be transformed into useful information that can be used for interpretation and analysis of problems. This paper outlines the feasibility of using geographic information system (GIS) techniques in the analysis of ...

  12. Towards Geographic Information Systems (GIS) Implementation: A Case Study

    Science.gov (United States)

    Meaney, Miriam

    2006-01-01

    "Despite its central role in real-world geography, the Geographic Information System (GIS) has had little uptake to date in School Geography." (Wiegand, 2001) This statement can be accurately applied to the author's current school setting and was the focus of her and her colleagues' case study, commenced in 2004 and continued into 2005.…

  13. A GIS-based extended fuzzy multi-criteria evaluation for landslide susceptibility mapping.

    Science.gov (United States)

    Feizizadeh, Bakhtiar; Shadman Roodposhti, Majid; Jankowski, Piotr; Blaschke, Thomas

    2014-12-01

    Landslide susceptibility mapping (LSM) is making increasing use of GIS-based spatial analysis in combination with multi-criteria evaluation (MCE) methods. We have developed a new multi-criteria decision analysis (MCDA) method for LSM and applied it to the Izeh River basin in south-western Iran. Our method is based on fuzzy membership functions (FMFs) derived from GIS analysis. It makes use of nine causal landslide factors identified by local landslide experts. Fuzzy set theory was first integrated with an analytical hierarchy process (AHP) in order to use pairwise comparisons to compare LSM criteria for ranking purposes. FMFs were then applied in order to determine the criteria weights to be used in the development of a landslide susceptibility map. Finally, a landslide inventory database was used to validate the LSM map by comparing it with known landslides within the study area. Results indicated that the integration of fuzzy set theory with AHP produced significantly improved accuracies and a high level of reliability in the resulting landslide susceptibility map. Approximately 53% of known landslides within our study area fell within zones classified as having "very high susceptibility", with the further 31% falling into zones classified as having "high susceptibility".

  14. A GIS-based extended fuzzy multi-criteria evaluation for landslide susceptibility mapping

    Science.gov (United States)

    Feizizadeh, Bakhtiar; Shadman Roodposhti, Majid; Jankowski, Piotr; Blaschke, Thomas

    2014-01-01

    Landslide susceptibility mapping (LSM) is making increasing use of GIS-based spatial analysis in combination with multi-criteria evaluation (MCE) methods. We have developed a new multi-criteria decision analysis (MCDA) method for LSM and applied it to the Izeh River basin in south-western Iran. Our method is based on fuzzy membership functions (FMFs) derived from GIS analysis. It makes use of nine causal landslide factors identified by local landslide experts. Fuzzy set theory was first integrated with an analytical hierarchy process (AHP) in order to use pairwise comparisons to compare LSM criteria for ranking purposes. FMFs were then applied in order to determine the criteria weights to be used in the development of a landslide susceptibility map. Finally, a landslide inventory database was used to validate the LSM map by comparing it with known landslides within the study area. Results indicated that the integration of fuzzy set theory with AHP produced significantly improved accuracies and a high level of reliability in the resulting landslide susceptibility map. Approximately 53% of known landslides within our study area fell within zones classified as having “very high susceptibility”, with the further 31% falling into zones classified as having “high susceptibility”. PMID:26089577

  15. Geographic information systems (GIS): an emerging method to assess demand and provision for rehabilitation services.

    Science.gov (United States)

    Passalent, Laura; Borsy, Emily; Landry, Michel D; Cott, Cheryl

    2013-09-01

    To illustrate the application of geographic information systems (GIS) as a tool to assess rehabilitation service delivery by presenting results from research recently conducted to assess demand and provision for community rehabilitation service delivery in Ontario, Canada. Secondary analysis of data obtained from existing sources was used to establish demand and provision profiles for community rehabilitation services. These data were integrated using GIS software. A number of descriptive maps were produced that show the geographical distribution of service provision variables (location of individual rehabilitation health care providers and location of private and publicly funded community rehabilitation clinics) in relation to the distribution of demand variables (location of the general population; location of specific populations (i.e., residents age 65 and older) and distribution of household income). GIS provides a set of tools for describing and understanding the spatial organization of the health of populations and the distribution of health services that can aid the development of health policy and answer key research questions with respect to rehabilitation health services delivery. Implications for Rehabilitation It is important to seek out alternative and innovative methods to examine rehabilitation service delivery. GIS is a computer-based program that takes any data linked to a geographically referenced location and processes it through a software system that manages, analyses and displays the data in the form of a map, allowing for an alternative level of analysis. GIS provides a set of tools for describing and understanding the spatial organization of population health and health services that can aid the development of health policy and answer key research questions with respect to rehabilitation health services delivery.

  16. USGS compilation of geographic information system (GIS) data of coal mines and coal-bearing areas in Mongolia

    Science.gov (United States)

    Trippi, Michael H.; Belkin, Harvey E.

    2015-09-10

    Geographic information system (GIS) information may facilitate energy studies, which in turn provide input for energy policy decisions. The U.S. Geological Survey (USGS) has compiled GIS data representing coal mines, deposits (including those with and without coal mines), occurrences, areas, basins, and provinces of Mongolia as of 2009. These data are now available for download, and may be used in a GIS for a variety of energy resource and environmental studies of Mongolia. Chemical data for 37 coal samples from a previous USGS study of Mongolia (Tewalt and others, 2010) are included in a downloadable GIS point shapefile and shown on the map of Mongolia. A brief report summarizes the methodology used for creation of the shapefiles and the chemical analyses run on the samples.

  17. Hydropower systems planning in distribution networks based on GIS

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez-Rosado, I.J.; Zorzano-Santamaria, P.; Fernandez-Jiminez, L.A.; Garcia-Garrido, E.; Zorzano-Alba, E.; Lara-Santillan, P.M.; Mendoza-Villena, M. [La Rioja Univ., La Rioja (Spain). Dept. of Electrical Engineering

    2005-07-01

    Planning models for hydraulic energy systems developed with a new computational geographic information system (GIS) tool were presented. The GIS tool was used to identify sections of rivers that are suitable for small-scale run-of-river hydropower generation in the La Rioja region of Spain. The tool was also used to evaluate economic data related to financing grants, technological costs, installation costs, and forecast demands for various consumption scenarios. Case studies of 2 hydropower systems were used to test the tool. The planning models were based on levelized electric costs (LEC) of run-of-river hydropower systems, and enabled the systems to be analyzed in isolation as well as when connected to an existing electricity network. Results of the modelling studies showed that the tool is capable of analyzing the LEC of potential hydropower systems in a range of different scenarios while maintaining the geographic characteristics and requirements of individual regions. 7 refs., 4 figs.

  18. Interactive Maps on War and Peace: A WebGIS Application for Civic Education

    Science.gov (United States)

    Wirkus, Lars; Strunck, Alexander

    2013-04-01

    War and violent conflict are omnipresent-be it war in the Middle East, violent conflicts in failed states or increasing military expenditures and exports/ imports of military goods. To understand certain conflicts or peace processes and their possible interrelation, to conduct a well-founded political discussion and to support or influence decision-making, one matter is of special importance: easily accessible and, in particular, reliable data and information. Against this background, the Bonn International Center for Conversion (BICC) in close cooperation with the German Federal Agency for Civic Education (bpb) has been developing a map-based information portal on war and peace with various thematic modules for the latter's online service (http://sicherheitspolitik.bpb.de). The portal will eventually offer nine of such modules that are intended to give various target groups, such as interested members of the public, teachers and learners, policymakers and representatives of the media access to the required information in form of an interactive and country-based global overview or a comparison of different issues. Five thematic modules have been completed so far: War and conflict, peace and demobilization, military capacities, resources and conflict, conventional weapons. The portal offers a broad spectrum of different data processing and visualization tools. Its central feature is an interactive mapping component based on WebGIS and a relational database. Content and data provided through thematic maps in the form of WebGIS layers are generally supplemented by info graphics, data tables and short articles providing deeper knowledge on the respective issue. All modules and their sub-chapters are introduced by background texts. They put all interactive maps of a module into an appropriate context and help the users to also understand the interrelation between various layers. If a layer is selected, all corresponding texts and graphics are shown automatically below

  19. Mapping Historic Hookworm Disease Prevalence in the Southern Us, Comparing Percent Prevalence with Percent Soil Drainage Type Using GIS

    Directory of Open Access Journals (Sweden)

    Alice L. Anderson

    2011-01-01

    Full Text Available Mapping of Historic US Hookworm prevalence data from the Rockefeller Sanitary Commission (early 1900s using current GIS (Geographic Information System software (county shape files illustrates the extremely high prevalence of hookworm disease (Uncariasis in the Southeastern US at the time. Some counties in 7 states recorded 50% to 100% of the population with positive screens for hookworm in a monumental surveillance and treatment campaign. Narrative descriptions mentioned higher prevalence in “sand districts” vs. “clay districts”. In order to validate this description for historic data, further GIS databases (STATSGO were used to classify and quantify the % acreage in Eastern North Carolina falling into moderately- to well-drained soil types. These were then mapped and compared with the historic prevalence data. Most severely infested counties had at least 50% moderately to well-drained soil. Further analysis on soil data for other states with “coastal plains” could provide more background information on Environmental conditions for hookworm prevalence and distribution in US history. “Since history has no properly scientific value, its only purpose is educative. And if historians neglect to educate the public, if they fail to interest it intelligently in the past, then all their historical learning is valueless except in so far as it educates themselves”. Trevelyan, (1922.

  20. Gis-Based Multi-Criteria Decision Analysis for Forest Fire Risk Mapping

    Science.gov (United States)

    Akay, A. E.; Erdoğan, A.

    2017-11-01

    The forested areas along the coastal zone of the Mediterranean region in Turkey are classified as first-degree fire sensitive areas. Forest fires are major environmental disaster that affects the sustainability of forest ecosystems. Besides, forest fires result in important economic losses and even threaten human lives. Thus, it is critical to determine the forested areas with fire risks and thereby minimize the damages on forest resources by taking necessary precaution measures in these areas. The risk of forest fire can be assessed based on various factors such as forest vegetation structures (tree species, crown closure, tree stage), topographic features (slope and aspect), and climatic parameters (temperature, wind). In this study, GIS-based Multi-Criteria Decision Analysis (MCDA) method was used to generate forest fire risk map. The study was implemented in the forested areas within Yayla Forest Enterprise Chiefs at Dursunbey Forest Enterprise Directorate which is classified as first degree fire sensitive area. In the solution process, "extAhp 2.0" plug-in running Analytic Hierarchy Process (AHP) method in ArcGIS 10.4.1 was used to categorize study area under five fire risk classes: extreme risk, high risk, moderate risk, and low risk. The results indicated that 23.81 % of the area was of extreme risk, while 25.81 % was of high risk. The result indicated that the most effective criterion was tree species, followed by tree stages. The aspect had the least effective criterion on forest fire risk. It was revealed that GIS techniques integrated with MCDA methods are effective tools to quickly estimate forest fire risk at low cost. The integration of these factors into GIS can be very useful to determine forested areas with high fire risk and also to plan forestry management after fire.

  1. Study of Noise Map and its Features in an Indoor Work Environment through GIS-Based Software

    Directory of Open Access Journals (Sweden)

    Faramarz Majidi

    2016-06-01

    Full Text Available Background: Noise mapping in industry can be useful to assess the risks of harmful noise, or to monitor noise in machine rooms. Using GIS -based software for plotting noise maps in an indoor noisy work environment can be helpful for occupational hygienists to monitor noise pollution. Methods: This study was carried out in a noisy packaging unit of a food industry in Ghazvin industrial zone, to evaluate noise levels by GIS technique. For this reason the floor of packaging unit was divided into squares of 2×2 meters and the center of each square was marked as a measurement station based on NIOSH method. The sound pressure level in each station was measured and then the measurement values were imported into Arc GIS software to plot noise map. Results: Unlike the current method, the noise maps generated by GIS technique are consistent with the nature of sound propagation. Conclusion: This study showed that for an indoor work environment, the application of GIS technology rendering the assessment of noise levels in the form of noise maps, is more realistic and more accurate than the routine method which is now being used by the occupational hygienists.

  2. Participatory GIS in design of the Wroclaw University of Science and Technology campus web map and spatial analysis of campus area quality

    Science.gov (United States)

    Blachowski, Jan; Łuczak, Jakub; Zagrodnik, Paulina

    2018-01-01

    Public participation geographic information system (GIS) and participatory mapping data collection methods are means that enhance capacity in generating, managing, and communicating spatial information in various fields ranging from local planning to environmental management. In this study these methods have been used in two ways. The first one, to gather information on the additional functionality of campus web map expected by its potential users, i.e. students, staff and visitors, through web based survey. The second, to collect geographically referenced information on campus areas that are liked and disliked in a geo-survey carried out with ArcGIS Online GeoForm Application. The results of the first survey were used to map facilities such as: bicycle infrastructure, building entrances, wheelchair accessible infrastructure and benches. The results of the second one, to analyse the most and the least attractive parts of the campus with heat and hot spot analyses in GIS. In addition, the answers have been studied with regard to the visual and functional aspects of campus area raised in the survey. The thematic layers developed in the results of field mapping and geoprocessing of geosurvey data were included in the campus web map project. The paper describes the applied methodology of data collection, processing, analysis, interpretation and geovisualisation.

  3. Participatory GIS in design of the Wroclaw University of Science and Technology campus web map and spatial analysis of campus area quality

    Directory of Open Access Journals (Sweden)

    Blachowski Jan

    2018-01-01

    Full Text Available Public participation geographic information system (GIS and participatory mapping data collection methods are means that enhance capacity in generating, managing, and communicating spatial information in various fields ranging from local planning to environmental management. In this study these methods have been used in two ways. The first one, to gather information on the additional functionality of campus web map expected by its potential users, i.e. students, staff and visitors, through web based survey. The second, to collect geographically referenced information on campus areas that are liked and disliked in a geo-survey carried out with ArcGIS Online GeoForm Application. The results of the first survey were used to map facilities such as: bicycle infrastructure, building entrances, wheelchair accessible infrastructure and benches. The results of the second one, to analyse the most and the least attractive parts of the campus with heat and hot spot analyses in GIS. In addition, the answers have been studied with regard to the visual and functional aspects of campus area raised in the survey. The thematic layers developed in the results of field mapping and geoprocessing of geosurvey data were included in the campus web map project. The paper describes the applied methodology of data collection, processing, analysis, interpretation and geovisualisation.

  4. Free and simple GIS as appropriate for health mapping in a low resource setting: a case study in eastern Indonesia.

    Science.gov (United States)

    Fisher, Rohan P; Myers, Bronwyn A

    2011-02-25

    Despite the demonstrated utility of GIS for health applications, there are perceived problems in low resource settings: GIS software can be expensive and complex; input data are often of low quality. This study aimed to test the appropriateness of new, inexpensive and simple GIS tools in poorly resourced areas of a developing country. GIS applications were trialled in pilot studies based on mapping of health resources and health indicators at the clinic and district level in the predominantly rural province of Nusa Tenggara Timur in eastern Indonesia. The pilot applications were (i) rapid field collection of health infrastructure data using a GPS enabled PDA, (ii) mapping health indicator data using open source GIS software, and (iii) service availability mapping using a free modelling tool. Through contextualised training, district and clinic staff acquired skills in spatial analysis and visualisation and, six months after the pilot studies, they were using these skills for advocacy in the planning process, to inform the allocation of some health resources, and to evaluate some public health initiatives. We demonstrated that GIS can be a useful and inexpensive tool for the decentralisation of health data analysis to low resource settings through the use of free and simple software, locally relevant training materials and by providing data collection tools to ensure data reliability.

  5. Application of Geographic Information System (GIS) to Model the Hydrocarbon Migration: Case Study from North-East Malay Basin, Malaysia

    Science.gov (United States)

    Rudini; Nasir Matori, Abd; Talib, Jasmi Ab; Balogun, Abdul-Lateef

    2018-03-01

    The purpose of this study is to model the migration of hydrocarbon using Geographic Information System (GIS). Understanding hydrocarbon migration is important since it can mean the difference between success and failure in oil and gas exploration project. The hydrocarbon migration modeling using geophysical method is still not accurate due to the limitations of available data. In recent years, GIS has emerged as a powerful tool for subsurface mapping and analysis. Recent studies have been carried out about the abilities of GIS to model hydrocarbon migration. Recent advances in GIS support the establishment and monitoring of prediction hydrocarbon migration. The concept, model, and calculation are based on the current geological situation. The spatial data of hydrocarbon reservoirs is determined by its geometry of lithology and geophysical attributes. Top of Group E horizon of north-east Malay basin was selected as the study area due to the occurrence of hydrocarbon migration. Spatial data and attributes data such as seismic data, wells log data and lithology were acquired and processed. Digital Elevation Model (DEM) was constructed from the selected horizon as a result of seismic interpretation using the Petrel software. Furthermore, DEM was processed in ArcGIS as a base map to shown hydrocarbon migration in north-east Malay Basin. Finally, all the data layers were overlaid to produce a map of hydrocarbon migration. A good data was imported to verify the model is correct.

  6. Application of Geographic Information System (GIS to Model the Hydrocarbon Migration: Case Study from North-East Malay Basin, Malaysia

    Directory of Open Access Journals (Sweden)

    Rudini

    2018-01-01

    Full Text Available The purpose of this study is to model the migration of hydrocarbon using Geographic Information System (GIS. Understanding hydrocarbon migration is important since it can mean the difference between success and failure in oil and gas exploration project. The hydrocarbon migration modeling using geophysical method is still not accurate due to the limitations of available data. In recent years, GIS has emerged as a powerful tool for subsurface mapping and analysis. Recent studies have been carried out about the abilities of GIS to model hydrocarbon migration. Recent advances in GIS support the establishment and monitoring of prediction hydrocarbon migration. The concept, model, and calculation are based on the current geological situation. The spatial data of hydrocarbon reservoirs is determined by its geometry of lithology and geophysical attributes. Top of Group E horizon of north-east Malay basin was selected as the study area due to the occurrence of hydrocarbon migration. Spatial data and attributes data such as seismic data, wells log data and lithology were acquired and processed. Digital Elevation Model (DEM was constructed from the selected horizon as a result of seismic interpretation using the Petrel software. Furthermore, DEM was processed in ArcGIS as a base map to shown hydrocarbon migration in north-east Malay Basin. Finally, all the data layers were overlaid to produce a map of hydrocarbon migration. A good data was imported to verify the model is correct.

  7. Developing an Erosion Rate Map for Myanmar Using USLE, GIS and Remote Sensing

    Science.gov (United States)

    Emtehani, Sobhan; Rutten, Martine

    2017-04-01

    Predicting erosion and estimating sediment loads in rivers are of major tasks in water resources system planning and management. In Myanmar erosion and collapse of river banks is common during the rainy season and riverine communities are frequently forced to relocate as their homes are dangerously close to the disintegrating river banks (Mann 2013). Myanmar is one of climatically most diverse countries located in Southeast Asia, where sheet, rill, and gully erosion affect crop yields as well as livelihood strategies of many people (Htwe, Brinkmann et al. 2015). In Myanmar, soil erosion measurement and monitoring approaches are increasingly important for land management planning to effectively avoid erosion and soil degradation, but such monitoring is limited by the availability of data and budgetary constraints. Therefore, spatial modeling approaches using GIS and remote sensing techniques play an important role for rapid risk assessments (Htwe 2016). In this study ''Model Builder'' tool in ArcGIS was used to create a model which generates an erosion rate map using Universal Soil Loss Equation (USLE). USLE is the product of five factors: rainfall erosivity factor (R), soil erodibility factor (K), slope length and steepness factor (LS), crop management factor (C), and support practice factor (P). Input data files for this model were acquired from online open source databases. Precipitation data was downloaded from Tropical Rainfall Measuring Mission (TRMM) for calculation of R factor. The resolution of TRMM data is very coarse (0.25 degree × 0.25 degree), therefore it was spatially downscaled by developing a relation between TRMM and Normalized Difference Vegetation Index (NDVI) using regression analysis method. Soil maps depicting percentages of sand, clay and silt were obtained from soilgrids website for calculation of K factor. Digital Elevation Model (DEM) with resolution of 90 meters was taken from Shuttle Radar Topography Mission (SRTM) for calculation of LS

  8. GIS-based rare events logistic regression for mineral prospectivity mapping

    Science.gov (United States)

    Xiong, Yihui; Zuo, Renguang

    2018-02-01

    Mineralization is a special type of singularity event, and can be considered as a rare event, because within a specific study area the number of prospective locations (1s) are considerably fewer than the number of non-prospective locations (0s). In this study, GIS-based rare events logistic regression (RELR) was used to map the mineral prospectivity in the southwestern Fujian Province, China. An odds ratio was used to measure the relative importance of the evidence variables with respect to mineralization. The results suggest that formations, granites, and skarn alterations, followed by faults and aeromagnetic anomaly are the most important indicators for the formation of Fe-related mineralization in the study area. The prediction rate and the area under the curve (AUC) values show that areas with higher probability have a strong spatial relationship with the known mineral deposits. Comparing the results with original logistic regression (OLR) demonstrates that the GIS-based RELR performs better than OLR. The prospectivity map obtained in this study benefits the search for skarn Fe-related mineralization in the study area.

  9. Using Geographic Information Systems (GIS) to understand a community's primary care needs.

    Science.gov (United States)

    Dulin, Michael F; Ludden, Thomas M; Tapp, Hazel; Blackwell, Joshua; de Hernandez, Brisa Urquieta; Smith, Heather A; Furuseth, Owen J

    2010-01-01

    A key element for reducing health care costs and improving community health is increased access to primary care and preventative health services. Geographic information systems (GIS) have the potential to assess patterns of health care utilization and community-level attributes to identify geographic regions most in need of primary care access. GIS, analytical hierarchy process, and multiattribute assessment and evaluation techniques were used to examine attributes describing primary care need and identify areas that would benefit from increased access to primary care services. Attributes were identified by a collaborative partnership working within a practice-based research network using tenets of community-based participatory research. Maps were created based on socioeconomic status, population density, insurance status, and emergency department and primary care safety-net utilization. Individual and composite maps identified areas in our community with the greatest need for increased access to primary care services. Applying GIS to commonly available community- and patient-level data can rapidly identify areas most in need of increased access to primary care services. We have termed this a Multiple Attribute Primary Care Targeting Strategy. This model can be used to plan health services delivery as well as to target and evaluate interventions designed to improve health care access.

  10. Geographic information system (GIS) representation of coal-bearing areas in India and Bangladesh

    Science.gov (United States)

    Trippi, Michael H.; Tewalt, Susan J.

    2011-01-01

    Geographic information system (GIS) information may facilitate energy studies, which in turn provide input for energy policy decisions. Prior to this study, no GIS file representing the occurrence of coal-bearing units in India or Bangladesh was known to exist. This Open-File Report contains downloadable shapefiles representing the coalfields of India and Bangladesh and a limited number of chemical and petrographic analyses of India and Bangladesh coal samples. Also included are maps of India and Bangladesh showing the locations of the coalfields and coal samples in the shapefiles, figures summarizing the stratigraphic units in the coalfields of India and Bangladesh, and a brief report summarizing the stratigraphy and geographic locations of coal-bearing deposits in India and Bangladesh.

  11. A GIS-based Power Transmission Management Information System

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>Based on analyzing the shortcomings of electric power enterprise in traditional operation pattern,this paper combines components GIS with the application of management information system,and uses the structure which unifies three layers C/S and B/S.Also,proposed using the GPS intellectualization patrol.This may be useful to guarantees the transmission line’s operation to be safe and stable.

  12. GIS based Hydrogeological Vulnerability Mapping of Groundwater Resources in Jerash Area-Jordan

    Energy Technology Data Exchange (ETDEWEB)

    Hammouri, N [Department of Earth and Environmental Sciences, Faculty of Natural Resources and Environment, Hashemite University, Zarqa (Jordan); El-Naqa, A [Department of Water Management and Environment, Faculty of Natural Resources and Environment, Hashemite University, Zarqa (Jordan)

    2008-04-15

    This paper presents groundwater vulnerability mapping for Jerash area, north Jordan generated using EPIK and DRASTIC models. These models have been implemented using GIS to delineate groundwater protection zones and to suggest a protection plan to improve groundwater quality of the major springs and wells. Most of the groundwater resources in the study area are polluted and bacteria and nitrate levels are high. Different sources of groundwater pollution have been identified. Domestic wastewater is considered as a major source of pollution. Urban runoff, fertilizers from agricultural return flows and solid waste disposal appear to be secondary sources. The most relevant vulnerability class of EPIK map is very high which accounts for about 41 % of the total area. While in the DRASTIC vulnerability map, areas with high vulnerability were only about 23 % of the total area. There is a good correlation between vulnerability maps obtained from both models with microbiological and chemical pollution evidences. There is also a good agreement between the areas classified as highly vulnerable and those that have high levels of pollution. [Spanish] El estudio de vulnerabilidad de aguas subterraneas en la region de Yerash, Jordania fue obtenido mediante las metodologias de EPIK y DRASTIC. Se uso GIS para mapear las zonas protegidas y para sugerir un plan de proteccion para mejorar la calidad del agua subterranea en los principales manantiales y pozos. Los niveles de contaminacion bacteriana y de nitratos son elevados. El efluente domestico es la fuente mas importante de contaminacion; vienen en segundo lugar la precipitacion en zonas urbanas, los fertilizantes agricolas y los desechos solidos. En el mapa de EPIK, la vulnerabilidad extrema abarca hasta 41% del area total; en cambio, en el mapa de DRASTIC las areas de alta vulnerabilidad ocupan solo un 23% del area. La correlacion de los datos de contaminacion microbiana y quimica con ambos mapas der vulnerabilidad es buena

  13. Technology Use in Rwandan Secondary Schools: An Assessment of Teachers' Attitudes towards Geographic Information Systems (GIS)

    Science.gov (United States)

    Akinyemi, Felicia O.

    2016-01-01

    Technology use is evident in all spheres of human endeavour. Focusing on technology use in education, this paper examines teachers' attitudes towards geographic information system (GIS). An assessment was made of GIS teachers in Rwandan secondary schools. Key areas covered include how GIS is implemented in schools, teachers' attitudes and…

  14. Development of Web GIS-Based VFSMOD System with Three Modules for Effective Vegetative Filter Strip Design

    Directory of Open Access Journals (Sweden)

    Dong Soo Kong

    2013-08-01

    Full Text Available In recent years, Non-Point Source Pollution has been rising as a significant environmental issue. The sediment-laden water problem is causing serious impacts on river ecosystems not only in South Korea but also in most countries. The vegetative filter strip (VFS has been thought to be one of the most effective methods to reduce the transport of sediment to down-gradient area. However, the effective width of the VFS first needs to be determined before VFS installation in the field. To provide an easy-to-use interface with a scientific VFS modeling engine, the Web GIS-based VFSMOD system was developed in this study. The Web GIS-based VFSMOD uses the UH and VFSM executable programs from the VFSMOD-w model as core engines to simulate rainfall-runoff and sediment trapping. To provide soil information for a point of interest, the Google Map interface to the MapServer soil database system was developed using the Google Map API, Javascript, Perl/CGI, and Oracle DB programming. Three modules of the Web GIS-based VFSMOD system were developed for various VFS designs under single storm, multiple storm, and long-term period scenarios. These modules in the Web GIS-based VFSMOD system were applied to the study watershed in South Korea and these were proven as efficient tools for the VFS design for various purposes.

  15. Analysis of terrains suitable for tourism and recreation by using geographic information system (GIS).

    Science.gov (United States)

    Aklıbaşında, Meliha; Bulut, Yahya

    2014-09-01

    The use and utilization areas of geographic information system (GIS) increase every day due to both enabling easiness in storing, updating, grouping, analyzing, correlating, and mapping of data about evaluation factors in planning studies and having quite low error margin depending on the accuracy of data stored. In fact, GIS is also used both in visualization and in various analyses in planning tourism terrains. In this study, the effectiveness of GIS on holistic evaluation of natural and cultural resources in planning tourism terrains was analyzed. Natural and cultural resources in Kayseri Yahyalı were quantified by using ArcGIS 9.3 software from GIS software; data were analyzed and potential tourism and recreation terrains, level of suitability, and rate of coverage were determined. As a result of the analyses, it was determined that 11.847 ha area (6,53%) was quite suitable for such kind of activities, 103.010 ha (56,77%) was suitable, 39.278 ha (21,65%) was less suitable, and 27.314 ha area (15,05%) was not suitable. In the next stage, landscape properties which are suitable for tourism and recreation were evaluated and landscape types were classified in the sense of their tourist attraction. It was determined that the water resources and valley landscapes were the basic sources of the tourism and recreation activities of Yahyalı, and it was determined that the landscape of the forest and mountain was important for variety of the tourism and recreation activities of Yahyalı.

  16. Mapping of groundwater potential zones in Salem Chalk Hills, Tamil Nadu, India, using remote sensing and GIS techniques.

    Science.gov (United States)

    Thilagavathi, N; Subramani, T; Suresh, M; Karunanidhi, D

    2015-04-01

    This study proposes to introduce the remote sensing and geographic information system (GIS) techniques in mapping the groundwater potential zones. Remote sensing and GIS techniques have been used to map the groundwater potential zones in Salem Chalk Hills, Tamil Nadu, India. Charnockites and fissile hornblende biotite gneiss are the major rock types in this region. Dunites and peridodites are the ultramafic rocks which cut across the foliation planes of the gneisses and are highly weathered. It comprises magnesite and chromite deposits which are excavated by five mining companies by adopting bench mining. The thickness of weathered and fracture zone varies from 2.2 to 50 m in gneissic formation and 5.8 to 55 m in charnockite. At the contacts of gneiss and charnockite, the thickness ranges from 9.0 to 90.8 m favoring good groundwater potential. The mine lease area is underlined by fractured and sheared hornblende biotite gneiss where groundwater potential is good. Water catchment tanks in this area of 5 km radius are small to moderate in size and are only seasonal. They remain dry during summer seasons. As perennial water resources are remote, the domestic and agricultural activities in this region depend mainly upon the groundwater resources. The mines are located in gently slope area, and accumulation of water is not observed except in mine pits even during the monsoon period. Therefore, it is essential to map the groundwater potential zones for proper management of the aquifer system. Satellite imageries were also used to extract lineaments, hydrogeomorphic landforms, drainage patterns, and land use, which are the major controlling factors for the occurrence of groundwater. Various thematic layers pertaining to groundwater existence such as geology, geomorphology, land use/land cover, lineament, lineament density, drainage, drainage density, slope, and soil were generated using GIS tools. By integrating all the above thematic layers based on the ranks and

  17. Geographic information system (GIS)-based maps of Appalachian basin oil and gas fields: Chapter C.2 in Coal and petroleum resources in the Appalachian basin: distribution, geologic framework, and geochemical character

    Science.gov (United States)

    Ryder, Robert T.; Kinney, Scott A.; Suitt, Stephen E.; Merrill, Matthew D.; Trippi, Michael H.; Ruppert, Leslie F.; Ryder, Robert T.

    2014-01-01

    One of the more recent maps of Appalachian basin oil and gas fields (and the adjoining Black Warrior basin) is the U.S. Geological Survey (USGS) compilation by Mast and others (1998) (see Trippi and others, this volume, chap. I.1). This map is part of a larger oil and gas field map for the conterminous United States that was derived by Mast and others (1998) from the Well History Control System (WHCS) database of Petroleum Information, Inc. (now IHS Energy Group). Rather than constructing the map from the approximately 500,000 proprietary wells in the Appalachian and Black Warrior part of the WHCS database, Mast and others (1998) subdivided the region into a grid of 1-mi2 (square mile) cells and allocated an appropriate type of hydrocarbon production (oil production, gas production, oil and gas production, or explored but no production) to each cell. Each 1-mi2 cell contains from 0 to 5 or more exploratory and (or) development wells. For example, if the wells in the 1-mi2 cell consisted of three oil wells, one gas well, and one dry well, then the cell would be characterized on the map as an area of oil and gas production. The map by Mast and others (1998) accurately shows the distribution and types of hydrocarbon accumulation in the Appalachian and Black Warrior basins, but it does not show the names of individual fields. To determine the locality and name of individual oil and gas fields, one must refer to State oil and gas maps (for example, Harper and others, 1982), which are generally published at scales of 1:250,000 or 1:500,000 (see References Cited), and (or) published journal articles.

  18. Digital surveying and mapping of forest road network for development of a GIS tool for the effective protection and management of natural ecosystems

    Science.gov (United States)

    Drosos, Vasileios C.; Liampas, Sarantis-Aggelos G.; Doukas, Aristotelis-Kosmas G.

    2014-08-01

    In our time, the Geographic Information Systems (GIS) have become important tools, not only in the geosciences and environmental sciences, as well as virtually for all researches that require monitoring, planning or land management. The purpose of this paper was to develop a planning tool and decision making tool using AutoCAD Map software, ArcGIS and Google Earth with emphasis on the investigation of the suitability of forest roads' mapping and the range of its implementation in Greece in prefecture level. Integrating spatial information into a database makes data available throughout the organization; improving quality, productivity, and data management. Also working in such an environment, you can: Access and edit information, integrate and analyze data and communicate effectively. To select desirable information such as forest road network in a very early stage in the planning of silviculture operations, for example before the planning of the harvest is carried out. The software programs that were used were AutoCAD Map for the export in shape files for the GPS data, and ArcGIS in shape files (ArcGlobe), while Google Earth with KML files (Keyhole Markup Language) in order to better visualize and evaluate existing conditions, design in a real-world context and exchange information with government agencies, utilities, and contractors in both CAD and GIS data formats. The automation of the updating procedure and transfer of any files between agencies-departments is one of the main tasks of the integrated GIS-tool among the others should be addressed.

  19. Using a Combined Platform of Swarm Intelligence Algorithms and GIS to Provide Land Suitability Maps for Locating Cardiac Rehabilitation Defibrillators

    Science.gov (United States)

    KAFFASH-CHARANDABI, Neda; SADEGHI-NIARAKI, Abolghasem; PARK, Dong-Kyun

    2015-01-01

    Background: Cardiac arrest is a condition in which the heart is completely stopped and is not pumping any blood. Although most cardiac arrest cases are reported from homes or hospitals, about 20% occur in public areas. Therefore, these areas need to be investigated in terms of cardiac arrest incidence so that places of high incidence can be identified and cardiac rehabilitation defibrillators installed there. Methods: In order to investigate a study area in Petersburg, Pennsylvania State, and to determine appropriate places for installing defibrillators with 5-year period data, swarm intelligence algorithms were used. Moreover, the location of the defibrillators was determined based on the following five evaluation criteria: land use, altitude of the area, economic conditions, distance from hospitals and approximate areas of reported cases of cardiac arrest for public places that were created in geospatial information system (GIS). Results: The A-P HADEL algorithm results were more precise about 27.36%. The validation results indicated a wider coverage of real values and the verification results confirmed the faster and more exact optimization of the cost function in the PSO method. Conclusion: The study findings emphasize the necessity of applying optimal optimization methods along with GIS and precise selection of criteria in the selection of optimal locations for installing medical facilities because the selected algorithm and criteria dramatically affect the final responses. Meanwhile, providing land suitability maps for installing facilities across hot and risky spots has the potential to save many lives. PMID:26587471

  20. Application of geographical information system (GIS) for the preparedness for response to nuclear emergencies

    International Nuclear Information System (INIS)

    Chaudhury, Probal; Pradeepkumar, K.S.; Saindane, S.S.; Suri, M.M.K.; Sharma, D.N.

    2005-01-01

    As recommended by International Atomic Energy Agency (IAEA), preparedness for response to nuclear/radiological emergencies is essential for all nations including those not having nuclear facilities. Methodology and systems for quick assessment of radiological impact following any large scale radioactive release/contamination in the environment are already developed. Efforts are being made to provide Geographical Information System (GIS) support for enhancing the capability of quick decision making on the implementation of countermeasures and to strengthen the Emergency Preparedness Program. This requires development of the database of nuclear facilities, roads, buildings, agriculture land, population density and geolocating using geocoded addresses. GIS helps in the creation of custom maps that spatially show several data layers pertinent to the cities/area around the nuclear power plants. The GIS based software imports and spatially displays the predicted movement of radioactive plume and helps in the revision of emergency plans based on the periodic inputs from various systems and monitoring teams. These tools, allow the Emergency Response Centers to take decisions regarding the progress, success and future direction of response in large cities/complex sites. (author)

  1. Design and implementation of information visualization system on science and technology industry based on GIS

    Science.gov (United States)

    Wu, Xiaofang; Jiang, Liushi

    2011-02-01

    Usually in the traditional science and technology information system, the only text and table form are used to manage the data, and the mathematic statistics method is applied to analyze the data. It lacks for the spatial analysis and management of data. Therefore, GIS technology is introduced to visualize and analyze the information data on science and technology industry. Firstly, by using the developed platform-microsoft visual studio 2005 and ArcGIS Engine, the information visualization system on science and technology industry based on GIS is built up, which implements various functions, such as data storage and management, inquiry, statistics, chart analysis, thematic map representation. It can show the change of science and technology information from the space and time axis intuitively. Then, the data of science and technology in Guangdong province are taken as experimental data and are applied to the system. And by considering the factors of humanities, geography and economics so on, the situation and change tendency of science and technology information of different regions are analyzed and researched, and the corresponding suggestion and method are brought forward in order to provide the auxiliary support for development of science and technology industry in Guangdong province.

  2. Renewable energy: GIS-based mapping and modelling of potentials and demand

    Science.gov (United States)

    Blaschke, Thomas; Biberacher, Markus; Schardinger, Ingrid.; Gadocha, Sabine; Zocher, Daniela

    2010-05-01

    Worldwide demand of energy is growing and will continue to do so for the next decades to come. IEA has estimated that global primary energy demand will increase by 40 - 50% from 2003 to 2030 (IEA, 2005) depending on the fact whether currently contemplated energy policies directed towards energy-saving and fuel-diversification will be effectuated. The demand for Renewable Energy (RE) is undenied but clear figures and spatially disaggregated potentials for the various energy carriers are very rare. Renewable Energies are expected to reduce pressures on the environment and CO2 production. In several studies in Germany (North-Rhine Westphalia and Lower Saxony) and Austria we studied the current and future pattern of energy production and consumption. In this paper we summarize and benchmark different RE carriers, namely wind, biomass (forest and non-forest, geothermal, solar and hydro power. We demonstrate that GIS-based scalable and flexible information delivery sheds new light on the prevailing metaphor of GIS as a processing engine serving needs of users more on demand rather than through ‘maps on stock'. We compare our finding with those of several energy related EU-FP7 projects in Europe where we have been involved - namely GEOBENE, REACCESS, ENERGEO - and demonstrate that more and more spatial data will become available together with tools that allow experts to do their own analyses and to communicate their results in ways which policy makers and the public can readily understand and use as a basis for their own actions. Geoportals in combination with standardised geoprocessing today supports the older vision of an automated presentation of data on maps, and - if user privileges are given - facilities to interactively manipulate these maps. We conclude that the most critical factor in modelling energy supply and demand remain the economic valuation of goods and services, especially the forecast of future end consumer energy costs.

  3. Spatial access priority mapping (SAPM) with fishers: a quantitative GIS method for participatory planning.

    Science.gov (United States)

    Yates, Katherine L; Schoeman, David S

    2013-01-01

    Spatial management tools, such as marine spatial planning and marine protected areas, are playing an increasingly important role in attempts to improve marine management and accommodate conflicting needs. Robust data are needed to inform decisions among different planning options, and early inclusion of stakeholder involvement is widely regarded as vital for success. One of the biggest stakeholder groups, and the most likely to be adversely impacted by spatial restrictions, is the fishing community. In order to take their priorities into account, planners need to understand spatial variation in their perceived value of the sea. Here a readily accessible, novel method for quantitatively mapping fishers' spatial access priorities is presented. Spatial access priority mapping, or SAPM, uses only basic functions of standard spreadsheet and GIS software. Unlike the use of remote-sensing data, SAPM actively engages fishers in participatory mapping, documenting rather than inferring their priorities. By so doing, SAPM also facilitates the gathering of other useful data, such as local ecological knowledge. The method was tested and validated in Northern Ireland, where over 100 fishers participated in a semi-structured questionnaire and mapping exercise. The response rate was excellent, 97%, demonstrating fishers' willingness to be involved. The resultant maps are easily accessible and instantly informative, providing a very clear visual indication of which areas are most important for the fishers. The maps also provide quantitative data, which can be used to analyse the relative impact of different management options on the fishing industry and can be incorporated into planning software, such as MARXAN, to ensure that conservation goals can be met at minimum negative impact to the industry. This research shows how spatial access priority mapping can facilitate the early engagement of fishers and the ready incorporation of their priorities into the decision-making process

  4. An Emergency System for Succoring Children using Mobile GIS

    OpenAIRE

    Ismaeel, Ayad Ghany

    2012-01-01

    The large numbers of sick children in different diseases are very dreaded, and when there isn't succor at the proper time and in the type the sick child need it that makes us lose child. This paper suggested an emergency system for succoring sick child locally when he required that, and there isn't someone knows his disease. The proposed system is the first tracking system works online (24 hour in the day) but only when the sick children requiring the help using mobile GIS. In, this emergency...

  5. A GIS-Enabled, Michigan-Specific, Hierarchical Groundwater Modeling and Visualization System

    Science.gov (United States)

    Liu, Q.; Li, S.; Mandle, R.; Simard, A.; Fisher, B.; Brown, E.; Ross, S.

    2005-12-01

    Efficient management of groundwater resources relies on a comprehensive database that represents the characteristics of the natural groundwater system as well as analysis and modeling tools to describe the impacts of decision alternatives. Many agencies in Michigan have spent several years compiling expensive and comprehensive surface water and groundwater inventories and other related spatial data that describe their respective areas of responsibility. However, most often this wealth of descriptive data has only been utilized for basic mapping purposes. The benefits from analyzing these data, using GIS analysis functions or externally developed analysis models or programs, has yet to be systematically realized. In this talk, we present a comprehensive software environment that allows Michigan groundwater resources managers and frontline professionals to make more effective use of the available data and improve their ability to manage and protect groundwater resources, address potential conflicts, design cleanup schemes, and prioritize investigation activities. In particular, we take advantage of the Interactive Ground Water (IGW) modeling system and convert it to a customized software environment specifically for analyzing, modeling, and visualizing the Michigan statewide groundwater database. The resulting Michigan IGW modeling system (IGW-M) is completely window-based, fully interactive, and seamlessly integrated with a GIS mapping engine. The system operates in real-time (on the fly) providing dynamic, hierarchical mapping, modeling, spatial analysis, and visualization. Specifically, IGW-M allows water resources and environmental professionals in Michigan to: * Access and utilize the extensive data from the statewide groundwater database, interactively manipulate GIS objects, and display and query the associated data and attributes; * Analyze and model the statewide groundwater database, interactively convert GIS objects into numerical model features

  6. The Multidimensional Measurements of Geographic Information Systems (GIS) Effectiveness in Crisis Management

    National Research Council Canada - National Science Library

    Aldaijy, Emad Y

    2004-01-01

    .... The seven GIS factors with respect to their importance in ascending order were system quality, information quality, user satisfaction, system use, decision performance, task complexity and feedback...

  7. Historical wetlands mapping and GIS processing for the Savannah River Site Database

    International Nuclear Information System (INIS)

    Christel, L.M.

    1994-08-01

    New policies regarding the open-quotes no net lossclose quotes of wetlands have presented resource managers and GIS analysts with a challenging ecological application. Historical aerial photography provides a temporal record of conditions over time, beneficial when appraising wetland gain and loss because man-made disturbances can have both short and long term effects on wetland communities. This is particularly true when assessing existing communities for restoration and reclamation of the ecologic structure and function of the community prior to a disturbance. Remediation efforts can be optimized when definitive documentation exists of the original communities. The Geographic Information System (GIS) is a powerful tool for integrating these data sets and performing spatial and temporal analyses in support of ecological applications. On the Savannah River Site (SRS) temporal analysis of multispectral scanner data has shown where wetlands were impacted by reactor operation, such as thermal discharge into creeks and swamps, and where wetlands were removed due to the construction of facilities. The GIS database was used to determine how the distribution and composition of wetland classes have changed over time. Historic black and white aerial photography of SRS as well as color infrared aerial photography as recent as 1989was used to develop a more current land cover database. Six wetland classes were photointerpreted. The historical data layer was then used in spatial analyses to aid in deriving potential viable and cost effective management technique alternatives for remediation of wetlands influenced by past reactor operations and has provided acreage estimates of wetlands lost. Acreage values can be used to estimate the potential costs of wetland remediation. This application of temporal analysis using a GIS demonstrates the utility of documenting prior conditions before remediation actually commences and how to maximize cost effective remediation efforts

  8. The Contribution of Geographic Information Systems (GIS) to Geography Education and Secondary School Students' Attitudes Related to GIS

    Science.gov (United States)

    Artvinli, Eyup

    2010-01-01

    The purpose of this study is to determine the place of Geographic Information Systems (GIS) in teaching geography, the general level of secondary school students' attitudes towards Geography Information Systems and whether this changes according to different variables. The population of the research consists of the students studying in Istanbul,…

  9. Application of GIS in foreign direct investment decision support system

    Science.gov (United States)

    Zhou, Jianlan; Sun, Koumei

    2007-06-01

    It is important to make decisions on how to attract foreign direct investment (FDI) to China and know how the inequality of FDI introduction by locational different provinces. Following background descriptions on China's FDI economic environments and FDI-related policies, this paper demonstrates the uses of geographical information system (GIS) and multi-criterion decision-making (MCDM) framework in solving a spatial multi-objective problem of evaluating and ranking China's provinces for FDI introduction. It implements a foreign direct investment decision support system, which reveals the main determinants of FDI in China and gives some results of regional geographical analysis over spatial data.

  10. A GIS application for assessing, mapping, and quantifying the social values of ecosystem services

    Science.gov (United States)

    Sherrouse, Benson C.; Clement, Jessica M.; Semmens, Darius J.

    2011-01-01

    As human pressures on ecosystems continue to increase, research involving the effective incorporation of social values information into the context of comprehensive ecosystem services assessments is becoming more important. Including quantified, spatially explicit social value metrics in such assessments will improve the analysis of relative tradeoffs among ecosystem services. This paper describes a GIS application, Social Values for Ecosystem Services (SolVES), developed to assess, map, and quantify the perceived social values of ecosystem services by deriving a non-monetary Value Index from responses to a public attitude and preference survey. SolVES calculates and maps the Value Index for social values held by various survey subgroups, as distinguished by their attitudes regarding ecosystem use. Index values can be compared within and among survey subgroups to explore the effect of social contexts on the valuation of ecosystem services. Index values can also be correlated and regressed against landscape metrics SolVES calculates from various environmental data layers. Coefficients derived through these analyses were applied to their corresponding data layers to generate a predicted social value map. This map compared favorably with other SolVES output and led to the addition of a predictive mapping function to SolVES for value transfer to areas where survey data are unavailable. A more robust application is being developed as a public domain tool for decision makers and researchers to map social values of ecosystem services and to facilitate discussions among diverse stakeholders involving relative tradeoffs among different ecosystem services in a variety of physical and social contexts.

  11. Development of GIS-based Wind Potential Map of Makkah Province, Saudi Arabia

    Science.gov (United States)

    Nayyar, Z. A.; Zaigham, N. A.; Aburizaiza, O. S.; Mahar, G. A.; Eusufi, S. N.

    2011-12-01

    Global energy scenario is changing drastically toward decline, as new major discoveries of fossil fuel are not coming up significantly on regional basis. In case of Saudi Arabia, one of the largest fossil fuel producers, the major oil fields have started exhausting significantly as revealed from the literature research study. Considering the future energy crisis, different other renewable options presently have became imperative to be consider anticipating for the national development. Wind energy in one of them. The development of wind energy technology requires the baseline data relevant to the wind trends and their potentials. Under the present study, an attempt has been made to develop wind power density map of the Makkah Province of Saudi Arabia based on the meteorological data collected at different sparsely located weather stations. GIS application has provided a good option to interpolate the gap areas between the sparsely located weather recording stations. This paper describe the methodology and results of the present study.

  12. Determination, Source Identification and GIS Mapping for Nitrate Concentration in Groundwater from Bara Aquifer

    Energy Technology Data Exchange (ETDEWEB)

    Elami, G. M.; Sam, A. K.; Yagob, T. I.; Siddeeg, S. E.M.B.; Hatim, E.; Hajo, I. [Sudan Atomic Energy Commission, Sudan, Khartoum (Sudan)

    2013-07-15

    This study was carried out to determine the level of nitrate concentration in well water from Bara aquifer in north Kordofan state (west central sudan). The analysis was conducted for 69 wells from different villages within the Bara basin. Spectophotometric analysis was used to determine nitrate, nitrite and ammonia. Results revealed that nitrate concentration range was from 9.68 to 891 mg L in the sampled well with 81% exceeding the maximum permissible limits set for drinking water by WHO and SSMO. Animal waste and organic soil nitrogen were found to be the source of nitrate in these wells as indicated by {sup 15}N. The majority of wells with high nitrate are in the north and the north east part of the study area are shown by the GIS predictive map. (author)

  13. Coastal erosion and accretion in Pak Phanang, Thailand by GIS analysis of maps and satellite imagery

    Directory of Open Access Journals (Sweden)

    Sayedur Rahman Chowdhury

    2013-12-01

    Full Text Available Coastal erosion and accretion in Pak Phanang of southern Thailand between 1973 and 2003 was measured using multi-temporal topographic maps and Landsat satellite imageries. Within a GIS environment landward and seaward movements of shoreline was estimated by a transect-based analysis, and amounts of land accretion and erosion were estimated by a parcel-based geoprocessing. The whole longitudinal extent of the 58 kilometer coast was classified based on the erosion and accretion trends during this period using agglomerative hierarchical clustering approach. Erosion and accretion were found variable over time and space, and periodic reversal of status was also noticed in many places. Estimates of erosion were evaluated against field-survey based data, and found reasonably accurate where the rates were relatively great. Smoothing of shoreline datasets was found desirable as its impacts on the estimates remained within tolerable limits.

  14. GIS-based maps and area estimates of Northern Hemisphere permafrost extent during the Last Glacial Maximum

    NARCIS (Netherlands)

    Lindgren, A.; Hugelius, G.; Kuhry, P.; Christensen, T.R.; Vandenberghe, J.F.

    2016-01-01

    This study presents GIS-based estimates of permafrost extent in the northern circumpolar region during the Last Glacial Maximum (LGM), based on a review of previously published maps and compilations of field evidence in the form of ice-wedge pseudomorphs and relict sand wedges. We focus on field

  15. GIS inundation mapping and dam breach analysis of Woolwich Dam using HEC-geoRAS

    Energy Technology Data Exchange (ETDEWEB)

    Mocan, N. [Crozier and Associates Inc., Collingwood, ON (Canada); Joy, D.M. [Guelph Univ., ON (Canada); Rungis, G. [Grand River Conservation Authority, Cambridge, ON (Canada)

    2006-07-01

    A study was conducted to determine the extent of flood inundation given a hypothetical dam breach scenario of the Woolwich Dam located in the Grand River Watershed, 2.5 km north of the Town of Elmira, Ontario. The dam is operated by the Grand River Conservation Authority and was constructed to provide low-flow augmentation to Canagagigue Creek. Advances in the computational capabilities of numerical models along with the availability of fine resolution geospatial data has lead to significant advances in the evaluation of catastrophic consequences due to the ensuing flood waters when dams fail. The hydraulic models HEC-RAS and HEC-GeoRAS were used in this study along with GIS to produce high resolution spatial and temporal flood inundation mapping. Given the proximity to the Town of Elmira, the dam is classified as having a high hazard potential. The large size and high hazard potential of the dam suggests that the Inflow Design Flood (IDF) is the Probable Maximum Flood (PMF) event. The outlet structure of the spillway consists of 4 ogee-type concrete spillways equipped with radial gates. A low-level concrete pipe located within the spillway structure provides spillage for maintenance purposes. The full flow capacity of the spillway structure is 297 cubic metres per second at the full supply level of 364.8 metres. In addition to GIS flood inundation maps, this paper included the results of flood hydrographs, water surface profiles and peak flow data. It was concluded that techniques used in this analysis should be considered for use in the development of emergency management planning and dam safety assessments across Canada. 6 refs., 3 tabs., 4 figs.

  16. Using catenas for GIS-based mapping of NW Mediterranean littoral habitats

    Science.gov (United States)

    Mariani, Simone; Cefalì, Maria Elena; Terradas, Marc; Chappuis, Eglantine; Ballesteros, Enric

    2014-06-01

    Studies aimed at describing habitats and mapping their distributions are pivotal to implementing management plans and to effectively guide conservation measures. We developed a novel approach of data collection and entry (CAT-LIT) to establish a detailed cartography of the littoral habitats found along the Catalan coast (Spain). Field data were recorded using coded, two-digit hierarchical lists (e.g. Aa, Ab, etc.) of horizons found at each point along the coast, called catenas. The horizons were either dominated by species (on the rocky bottoms) or sediment types (on the beaches) and corresponded to LPRE, EUNIS and CORINE habitats. Catenas were transferred into a database and calculations about the extent of bottom types, habitats, and catenas themselves along the coast were carried out with GIS tools. In addition, habitat link richness was calculated and represented using network analysis programs. The application of CAT-LIT to the Catalan coast showed that the habitats dominated by the lichen Verrucaria amphibia and the flattened barnacle Euraphia depressa and those dominated by the barnacle Chthamalus spp. were almost ubiquitous. Those dominated by the red alga Corallina elongata, the mussel Mytilus galloprovincialis and the red alga Rissoella verruculosa were also common. Because of the frequency of their connections, those habitats formed a huge hub of links in the networks. By using catenas, the habitats can be viewed using GIS based programs keeping the catena as the main informational and ecological unit. The catenas allow maximum compactness when vertically distributed habitats are to be shown on a 2D map. The complete cartography and dataset on the spatial distribution of the littoral habitats from Catalonia is valuable for coastal management and conservation to study changes in the habitat distribution and relate such changes to anthropogenic pressures. Furthermore, the CAT-LIT can be easily adapted to shores of other seas and oceans to obtain accurate

  17. Gis and public health

    CERN Document Server

    Cromley, Ellen K

    2011-01-01

    Authoritative and comprehensive, this is the leading text and professional resource on using geographic information systems (GIS) to analyze and address public health problems. Basic GIS concepts and tools are explained, including ways to access and manage spatial databases. The book presents state-of-the-art methods for mapping and analyzing data on population, health events, risk factors, and health services, and for incorporating geographical knowledge into planning and policy. Numerous maps, diagrams, and real-world applications are featured. The companion Web page provides lab exercises w

  18. Panoramic Images Mapping Tools Integrated Within the ESRI ArcGIS Software

    International Nuclear Information System (INIS)

    Guo, Jiao; Zhong, Ruofei; Zeng, Fanyang

    2014-01-01

    There is a general study on panoramic images which are presented along with appearance of the Google street map. Despite 360 degree viewing of street, we can realize more applications over panoramic images. This paper developed a toolkits plugged in ArcGIS, which can view panoramic photographs at street level directly from ArcMap and measure and capture all visible elements as frontages, trees and bridges. We use a series of panoramic images adjoined with absolute coordinate through GPS and IMU. There are two methods in this paper to measure object from these panoramic images: one is to intersect object position through a stereogram; the other one is multichip matching involved more than three images which all cover the object. While someone wants to measure objects from these panoramic images, each two panoramic images which both contain the object can be chosen to display on ArcMap. Then we calculate correlation coefficient of the two chosen panoramic images so as to calculate the coordinate of object. Our study test different patterns of panoramic pairs and compare the results of measurement to the real value of objects so as to offer the best choosing suggestion. The article has mainly elaborated the principles of calculating correlation coefficient and multichip matching

  19. An application of Geographic Information System in mapping flood ...

    African Journals Online (AJOL)

    Roland

    1Department of Geography, Benue State University, Makurdi, Benue State, Nigeria. 2National Agency for the Control of AIDS (NACA), Central Area, Abuja, Nigeria. Accepted 20 May, 2013. This study deals with the application of Geographic Information Systems (GIS) in mapping flood risk zones in Makurdi Town. This study ...

  20. Spatiotemporal Pattern of Crime Using Geographic Information System (GIS) Approach in Dala L.G.A of Kano State, Nigeria

    OpenAIRE

    M. Ahmed

    2013-01-01

    This study explores the use of Geographic Information Systems (GIS) and spatial database of crime characteristics which helps in the determination of hotspots in Dala LGA of Kano State and also it identifies the challenges facing police departments that seek to implement computerized crime mapping systems. Different data sources were used, data from the Nigerian Police Force ( Dala and Jakara Division) of 2008 – 2010. For this study, the crime was divided into four categories: offence against...

  1. The Benefits and Complexities of Operating Geographic Information Systems (GIS) in a High Performance Computing (HPC) Environment

    Science.gov (United States)

    Shute, J.; Carriere, L.; Duffy, D.; Hoy, E.; Peters, J.; Shen, Y.; Kirschbaum, D.

    2017-12-01

    The NASA Center for Climate Simulation (NCCS) at the Goddard Space Flight Center is building and maintaining an Enterprise GIS capability for its stakeholders, to include NASA scientists, industry partners, and the public. This platform is powered by three GIS subsystems operating in a highly-available, virtualized environment: 1) the Spatial Analytics Platform is the primary NCCS GIS and provides users discoverability of the vast DigitalGlobe/NGA raster assets within the NCCS environment; 2) the Disaster Mapping Platform provides mapping and analytics services to NASA's Disaster Response Group; and 3) the internal (Advanced Data Analytics Platform/ADAPT) enterprise GIS provides users with the full suite of Esri and open source GIS software applications and services. All systems benefit from NCCS's cutting edge infrastructure, to include an InfiniBand network for high speed data transfers; a mixed/heterogeneous environment featuring seamless sharing of information between Linux and Windows subsystems; and in-depth system monitoring and warning systems. Due to its co-location with the NCCS Discover High Performance Computing (HPC) environment and the Advanced Data Analytics Platform (ADAPT), the GIS platform has direct access to several large NCCS datasets including DigitalGlobe/NGA, Landsat, MERRA, and MERRA2. Additionally, the NCCS ArcGIS Desktop Windows virtual machines utilize existing NetCDF and OPeNDAP assets for visualization, modelling, and analysis - thus eliminating the need for data duplication. With the advent of this platform, Earth scientists have full access to vast data repositories and the industry-leading tools required for successful management and analysis of these multi-petabyte, global datasets. The full system architecture and integration with scientific datasets will be presented. Additionally, key applications and scientific analyses will be explained, to include the NASA Global Landslide Catalog (GLC) Reporter crowdsourcing application, the

  2. DEVELOPMENT OF A CARBON MANAGEMENT GEOGRAPHIC INFORMATION SYSTEM (GIS) FOR THE UNITED STATES

    Energy Technology Data Exchange (ETDEWEB)

    Howard J. Herzog

    2004-03-01

    The Lab for Energy and Environment (LFEE) at MIT is developing a Geographic Information System (GIS) for carbon management. The GIS will store, integrate, and manipulate information relating to the components of carbon management systems. Additionally, the GIS can be used to interpret and analyze the effect of developing these systems. In the first year of this three year project, we focused on two tasks: (1) specifying the system design--defining in detail the GIS data requirements, the types of analyses that can be conducted, and the forms of output we will produce, as well as designing the computer architecture of the GIS and (2) creating the ''core'' datasets--identifying data sources and converting them into a form accessible by the GIS.

  3. Application of GIS in prediction and assessment system of off-site accident consequence for NPP

    International Nuclear Information System (INIS)

    Wang Xingyu; Shi Zhongqi

    2002-01-01

    The assessment and prediction software system of off-site accident consequence for Guangdong Nuclear Power Plant (GNARD2.0) is a GIS-based software system. The spatial analysis of radioactive materials and doses with geographic information is available in this system. The structure and functions of the GNARD system and the method of applying ArcView GIS are presented

  4. Design of Intelligent Transportation Inquiry System Based on MapX in the Environment of VC++

    Directory of Open Access Journals (Sweden)

    Cheng Juan

    2016-01-01

    Full Text Available This paper applied MapInfo, the professional soft ware tool of GIS, integrated secondary exploiture combining with elctronic maps, and made use of the exploiture flat roof Visual C++ as the tool of visualize development, transferred MapX, a control of MapInfo, integrated them. The paper designed the Inquiry System in Intelligent Transportation, which including query system of road information, query system of bus information, query system of district information. It can be carried out space analysis and query function based on GIS. Adopted SQL Server manage attribute data, by data binding, attribute data in SQL Server and victor picture data were combined.

  5. Salmonella infections modelling in Mississippi using neural network and geographical information system (GIS).

    Science.gov (United States)

    Akil, Luma; Ahmad, H Anwar

    2016-03-03

    Mississippi (MS) is one of the southern states with high rates of foodborne infections. The objectives of this paper are to determine the extent of Salmonella and Escherichia coli infections in MS, and determine the Salmonella infections correlation with socioeconomic status using geographical information system (GIS) and neural network models. In this study, the relevant updated data of foodborne illness for southern states, from 2002 to 2011, were collected and used in the GIS and neural networks models. Data were collected from the Centers for Disease Control and Prevention (CDC), MS state Department of Health and the other states department of health. The correlation between low socioeconomic status and Salmonella infections were determined using models created by several software packages, including SAS, ArcGIS @RISK and NeuroShell. Results of this study showed a significant increase in Salmonella outbreaks in MS during the study period, with highest rates in 2011 (47.84 ± 24.41 cases/100,000; pGIS maps of Salmonella outbreaks in MS in 2010 and 2011 showed the districts with higher rates of Salmonella. Regression analysis and neural network models showed a moderate correlation between cases of Salmonella infections and low socioeconomic factors. Poverty was shown to have a negative correlation with Salmonella outbreaks (R(2)=0.152, p<0.05). Geographic location besides socioeconomic status may contribute to the high rates of Salmonella outbreaks in MS. Understanding the geographical and economic relationship with infectious diseases will help to determine effective methods to reduce outbreaks within low socioeconomic status communities. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  6. ecological geological maps: GIS-based evaluation of the Geo-Ecological Quality Index (GEQUI) in Sicily (Central Mediterranean)

    Science.gov (United States)

    Nigro, Fabrizio; Arisco, Giuseppe; Perricone, Marcella; Renda, Pietro; Favara, Rocco

    2010-05-01

    The condition of landscapes and the ecological communities within them is strongly related to levels of human activity. As a consequence, determining status and trends in the pattern of human-dominated landscapes can be useful for understanding the overall conditions of geo-ecological resources. Ecological geological maps are recent tools providing useful informations about a-biotic and biotic features worldwide. These maps represents a new generation of geological maps and depict the lithospheric components conditions on surface, where ecological dynamics (functions and properties) and human activities develop. Thus, these maps are too a fundamental political tool to plan the human activities management in relationship to the territorial/environmental patterns of a date region. Different types of ecological geological maps can be develop regarding the: conditions (situations), zoning, prognosis and recommendations. The ecological geological conditions maps reflects the complex of parameters or individual characteristics of lithosphere, which characterized the opportunity of the influence of lithosphere components on the biota (man, fauna, flora, and ecosystem). The ecological geological zoning maps are foundamental basis for prognosis estimation and nature defenses measures. Estimation from the position of comfort and safety of human life and function of ecosystem is given on these maps. The ecological geological prognosis maps reflect the spatial-temporary prognoses of ecological geological conditions changing during the natural dynamic of natural surrounding and the main-during the economic mastering of territory and natural technical systems. Finally, the ecological geological recommendation maps are based on the ecological geological and social-economical informations, aiming the regulation of territory by the regulation of economic activities and the defense of bio- and socio-sphere extents. Each of these maps may also be computed or in analytic or in

  7. GIS Based Application of Advanced Traveler Information System in India

    Science.gov (United States)

    Kumar, P.; Singh, V.

    2012-02-01

    Developed countries like USA, Canada, Japan, UK, Australia and Germany have adopted advanced traveler information technologies expeditiously in comparison to developing countries. But, unlike developed countries, developing countries face considerable financial and framework constraints. Moreover local traffic, roadway, signalization, demographic, topological and social conditions in developing countries are quite different from those in developed countries. In this paper, a comprehensive framework comprising of system architecture, development methodology and salient features of a developed Advanced Traveler Information System (ATIS) for metropolitan cities in developing countries has been discussed. Development of proposed system is based on integration of two well known information technologies viz. Geographic Information Systems (GIS) and World Wide Web (WWW). Combination of these technologies can be utilized to develop an integrated ATIS that targets different types of travelers like private vehicle owners, transit users and casual outside visitors.

  8. GIS based optimal impervious surface map generation using various spatial data for urban nonpoint source management.

    Science.gov (United States)

    Lee, Cholyoung; Kim, Kyehyun; Lee, Hyuk

    2018-01-15

    Impervious surfaces are mainly artificial structures such as rooftops, roads, and parking lots that are covered by impenetrable materials. These surfaces are becoming the major causes of nonpoint source (NPS) pollution in urban areas. The rapid progress of urban development is increasing the total amount of impervious surfaces and NPS pollution. Therefore, many cities worldwide have adopted a stormwater utility fee (SUF) that generates funds needed to manage NPS pollution. The amount of SUF is estimated based on the impervious ratio, which is calculated by dividing the total impervious surface area by the net area of an individual land parcel. Hence, in order to identify the exact impervious ratio, large-scale impervious surface maps (ISMs) are necessary. This study proposes and assesses various methods for generating large-scale ISMs for urban areas by using existing GIS data. Bupyeong-gu, a district in the city of Incheon, South Korea, was selected as the study area. Spatial data that were freely offered by national/local governments in S. Korea were collected. First, three types of ISMs were generated by using the land-cover map, digital topographic map, and orthophotographs, to validate three methods that had been proposed conceptually by Korea Environment Corporation. Then, to generate an ISM of higher accuracy, an integration method using all data was proposed. Error matrices were made and Kappa statistics were calculated to evaluate the accuracy. Overlay analyses were performed to examine the distribution of misclassified areas. From the results, the integration method delivered the highest accuracy (Kappa statistic of 0.99) compared to the three methods that use a single type of spatial data. However, a longer production time and higher cost were limiting factors. Among the three methods using a single type of data, the land-cover map showed the highest accuracy with a Kappa statistic of 0.91. Thus, it was judged that the mapping method using the land

  9. Comparing speed of Web Map Service with GeoServer on ESRI Shapefile and PostGIS

    Directory of Open Access Journals (Sweden)

    Jan Růžička

    2016-07-01

    Full Text Available There are several options how to configure Web Map Service using severalmap servers. GeoServer is one of most popular map servers nowadays.GeoServer is able to read data from several sources. Very popular datasource is ESRI Shapefile. It is well documented and most of softwarefor geodata processing is able to read and write data in this format.Another very popular data store is PostgreSQL/PostGIS object-relationaldatabase. Both data sources has advantages and disadvantages and userof GeoServer has to decide which one to use. The paper describescomparison of performance of GeoServer Web Map Service when readingdata from ESRI Shapefile or from PostgreSQL/PostGIS database.

  10. Fuzzy Shannon Entropy: A Hybrid GIS-Based Landslide Susceptibility Mapping Method

    Directory of Open Access Journals (Sweden)

    Majid Shadman Roodposhti

    2016-09-01

    Full Text Available Assessing Landslide Susceptibility Mapping (LSM contributes to reducing the risk of living with landslides. Handling the vagueness associated with LSM is a challenging task. Here we show the application of hybrid GIS-based LSM. The hybrid approach embraces fuzzy membership functions (FMFs in combination with Shannon entropy, a well-known information theory-based method. Nine landslide-related criteria, along with an inventory of landslides containing 108 recent and historic landslide points, are used to prepare a susceptibility map. A random split into training (≈70% and testing (≈30% samples are used for training and validation of the LSM model. The study area—Izeh—is located in the Khuzestan province of Iran, a highly susceptible landslide zone. The performance of the hybrid method is evaluated using receiver operating characteristics (ROC curves in combination with area under the curve (AUC. The performance of the proposed hybrid method with AUC of 0.934 is superior to multi-criteria evaluation approaches using a subjective scheme in this research in comparison with a previous study using the same dataset through extended fuzzy multi-criteria evaluation with AUC value of 0.894, and was built on the basis of decision makers’ evaluation in the same study area.

  11. Black Sea GIS developed in MHI

    Science.gov (United States)

    Zhuk, E.; Khaliulin, A.; Zodiatis, G.; Nikolaidis, A.; Isaeva, E.

    2016-08-01

    The work aims at creating the Black Sea geoinformation system (GIS) and complementing it with a model bank. The software for data access and visualization was developed using client server architecture. A map service based on MapServer and MySQL data management system were chosen for the Black Sea GIS. Php-modules and python-scripts are used to provide data access, processing, and exchange between the client application and the server. According to the basic data types, the module structure of GIS was developed. Each type of data is matched to a module which allows selection and visualization of the data. At present, a GIS complement with a model bank (the models build in to the GIS) and users' models (programs launched on users' PCs but receiving and displaying data via GIS) is developed.

  12. Communicating and Evaluating the Causes of Seismicity in Oklahoma Using ArcGIS Online Story Map Web Applications

    Science.gov (United States)

    Justman, D.; Rose, K.; Bauer, J. R.; Miller, R., III; Vasylkivska, V.; Romeo, L.

    2016-12-01

    ArcGIS Online story maps allows users to communicate complex topics with geospatially enabled stories. This story map web application entitled "Evaluating the Mysteries of Seismicity in Oklahoma" has been employed as part of a broader research effort investigating the relationships between spatiotemporal systems and seismicity to understand the recent increase in seismicity by reviewing literature, exploring, and performing analyses on key datasets. It offers information about the unprecedented increase in seismic events since 2008, earthquake history, the risk to the population, physical mechanisms behind earthquakes, natural and anthropogenic earthquake factors, and individual & cumulative spatial extents of these factors. The cumulative spatial extents for natural, anthropogenic, and all combined earthquake factors were determined using the Cumulative Spatial Impact Layers (CSILs) tool developed at the National Energy Technology Laboratory (NETL). Results show positive correlations between the average number of influences (datasets related to individual factors) and the number of earthquakes for every 100 square mile grid cell in Oklahoma, along with interesting spatial correlations for the individual & cumulative spatial extents of these factors when overlaid with earthquake density and a hotspot analysis for earthquake magnitude from 2010 to 2015.

  13. Increasing Efficiency of Soil Fertility Map for Rice Cultivation Using Fuzzy Logic, AHP and GIS

    Directory of Open Access Journals (Sweden)

    javad seyedmohammadi

    2017-02-01

    Full Text Available Introduction: With regard to increasing population of country, need to high agricultural production is essential. The most suitable method for this issue is high production per area unit. Preparation much food and other environmental resources with conservation of biotic resources for futures will be possible only with optimum exploitation of soil. Among effective factors for the most production balanced addition of fertilizers increases production of crops higher than the others. With attention to this topic, determination of soil fertility degree is essential tobetter use of fertilizers and right exploitation of soils. Using fuzzy logic and Analytic Hierarchy Process (AHP could be useful in accurate determination of soil fertility degree. Materials and Methods: The study area (at the east of Rasht city is located between 49° 31' to 49° 45' E longitude and 37° 7' to 37° 27' N latitude in north of Guilan Province, northern Iran, in the southern coast of the Caspian sea. 117 soil samples were derived from0-30 cm depth in the study area. Air-dried soil samples were crushed and passed through a 2mm sieve. Available phosphorus, potassium and organic carbon were determined by sodium bicarbonate, normal ammonium acetate and corrected walkly-black method, respectively. In the first stage, the interpolation of data was done by kriging method in GIS context. Then S-shape membership function was defined for each parameter and prepared fuzzy map. After determination of membership function weight parameters maps were determined using AHP technique and finally soil fertility map was prepared with overlaying of weighted fuzzy maps. Relative variance and correlation coefficient criteria used tocontrol groups separation accuracy in fuzzy fertility map. Results and Discussion: With regard to minimum amounts of parameters looks some lands of study area had fertility difficulty. Therefore, soil fertility map of study area distinct these lands and present soil

  14. GIS Facility and Services at the Ronald Greeley Center for Planetary Studies

    Science.gov (United States)

    Nelson, D. M.; Williams, D. A.

    2017-06-01

    At the RGCPS, we established a Geographic Information Systems (GIS) computer laboratory, where we instruct researchers how to use GIS and image processing software. Seminars demonstrate viewing, integrating, and digitally mapping planetary data.

  15. Use of GIS Tools for Environmental Conflict Resolution at Map Ta Phut Industrial Zone in Thailand

    Directory of Open Access Journals (Sweden)

    Phattraporn Soytong

    2014-04-01

    Full Text Available Special industrial zones are favored over scattered industries from an environmental management perspective, but poor management can lead to conflicts. This paper presents an analysis of the environmental conflict that arose between the state, society, and industry stakeholders in an industrial zone of the Eastern Seaboard Development Program of Thailand. This paper seeks to determine the effectiveness of policy measures implemented by the state to resolve the conflict. The purpose of this study is to draw lessons for industrializing nations that adopt the industrial zone model to foster environmentally sustainable industrial development. The study revealed that blatant violation of land-use planning regulations and expansion of the industrial zone into community areas was a root cause of the conflict. Through legal action, civil society has been successful in forcing the state and industries to halt unplanned expansion of industrial areas and practice better environmental governance. However, inadequate commitment by the state and industry stakeholders seems to perpetuate the conflict, threatening the sustainability of economic gains. A Geographic Information Systems (GIS-based analysis confirmed that the policy interventions of the government to resolve the conflict have not produced significant results. This paper highlights the need for GIS-based environmental quality monitoring for guiding industrialization-based urban development towards sustainability.

  16. Land desertification monitoring and assessment in Yulin of Northwest China using remote sensing and geographic information systems (GIS).

    Science.gov (United States)

    Zhang, Yuanzhi; Chen, Zhengyi; Zhu, Boqin; Luo, Xiuyue; Guan, Yanning; Guo, Shan; Nie, Yueping

    2008-12-01

    The objective of this study is to develop techniques for assessing and analysing land desertification in Yulin of Northwest China, as a typical monitoring region through the use of remotely sensed data and geographic information systems (GIS). The methodology included the use of Landsat TM data from 1987, 1996 and 2006, supplemented by aerial photos in 1960, topographic maps, field work and use of other existing data. From this, land cover, the Normalised Difference Vegetation Index (NDVI), farmland, woodland and grassland maps at 1:100,000 were prepared for land desertification monitoring in the area. In the study, all data was entered into a GIS using ILWIS software to perform land desertification monitoring. The results indicate that land desertification in the area has been developing rapidly during the past 40 years. Although land desertification has to some extent been controlled in the area by planting grasses and trees, the issue of land desertification is still serious. The study also demonstrates an example of why the integration of remote sensing with GIS is critical for the monitoring of environmental changes in arid and semi-arid regions, e.g. in land desertification monitoring in the Yulin pilot area. However, land desertification monitoring using remote sensing and GIS still needs to be continued and also refined for the purpose of long-term monitoring and the management of fragile ecosystems in the area.

  17. The GIS and data solution for advanced business analysis

    OpenAIRE

    RADUT Carmen

    2009-01-01

    The GIS Business Analyst is a suite of Geographic Information System (GIS)-enabled tools, wizards, and data that provides business professionals with a complete solution for site evaluation, selective customer profiling, and trade area market analysis. Running simple reports, mapping the results, and performing complex probability models are among the capabilities The GIS Business Analyst offers in one affordable desktop analysis solution. Data and analyses produced by The GIS Business Analys...

  18. 76 FR 41855 - Columbus Geographic Systems (GIS) Ltd.; Order of Suspension of Trading

    Science.gov (United States)

    2011-07-15

    ... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] Columbus Geographic Systems (GIS) Ltd.; Order of Suspension of Trading July 13, 2011. It appears to the Securities and Exchange Commission that... Systems (GIS) Ltd. because it has not filed any periodic reports since the period ended June 30, 2008. The...

  19. Adaptions of ArcGIS' Linear Referencing System to the Coastal Environment

    DEFF Research Database (Denmark)

    Balstrøm, Thomas

    2008-01-01

    For many years it has been problematic to store information for the coastal environment in a GIS. However, a system named "Linear referencing System" based upon a dynamic segmentation principle implemented in ESRIs ArcGIS 9 software has now made it possible to store and analyze information...

  20. Evaluation of SOVAT: An OLAP-GIS decision support system for community health assessment data analysis

    Directory of Open Access Journals (Sweden)

    Parmanto Bambang

    2008-06-01

    Full Text Available Abstract Background Data analysis in community health assessment (CHA involves the collection, integration, and analysis of large numerical and spatial data sets in order to identify health priorities. Geographic Information Systems (GIS enable for management and analysis using spatial data, but have limitations in performing analysis of numerical data because of its traditional database architecture. On-Line Analytical Processing (OLAP is a multidimensional datawarehouse designed to facilitate querying of large numerical data. Coupling the spatial capabilities of GIS with the numerical analysis of OLAP, might enhance CHA data analysis. OLAP-GIS systems have been developed by university researchers and corporations, yet their potential for CHA data analysis is not well understood. To evaluate the potential of an OLAP-GIS decision support system for CHA problem solving, we compared OLAP-GIS to the standard information technology (IT currently used by many public health professionals. Methods SOVAT, an OLAP-GIS decision support system developed at the University of Pittsburgh, was compared against current IT for data analysis for CHA. For this study, current IT was considered the combined use of SPSS and GIS ("SPSS-GIS". Graduate students, researchers, and faculty in the health sciences at the University of Pittsburgh were recruited. Each round consisted of: an instructional video of the system being evaluated, two practice tasks, five assessment tasks, and one post-study questionnaire. Objective and subjective measurement included: task completion time, success in answering the tasks, and system satisfaction. Results Thirteen individuals participated. Inferential statistics were analyzed using linear mixed model analysis. SOVAT was statistically significant (α = .01 from SPSS-GIS for satisfaction and time (p Conclusion Using SOVAT, tasks were completed more efficiently, with a higher rate of success, and with greater satisfaction, than the

  1. Energy management based on AM/FM/GIS for phase balancing application on distribution systems

    International Nuclear Information System (INIS)

    Kuo, C.-C.; Chao, Y.-T.

    2010-01-01

    Unbalanced feeder systems may deteriorate of power quality, and increase investment and operating costs for distribution systems. The phase swapping method recommends re-phasing circuits of laterals and transformers for making the current and voltage balanced and also reducing feeder loss and voltage drop. In this paper, an application program, based on the automated mapping/facilities management/ geographic information system (AM/FM/GIS) is developed which contains a function of automatically computing Z-bus, load flow and phase balancing of feeders with phase swapping by using easily selecting of feeder on a graphic user interface application. Therefore, the relative data need not be keyed in manually. The presented phase balancing algorithm are based on database and related data structures developed on the AM/FM/GIS and Visual Basic software, which can be integrated into the Tai-Power distribution automation system. Then, the phase balancing algorithm is designed to handle the load patterns and the load of transformers that connect specific feeders when evaluating phase swaps that will result in reduced daily circuit losses over all load points. The proposed application not only can effectively reduce the circuit loss and improves phase balancing, but also enhances power quality efficiently under easily using environment.

  2. The Application of Remote Sensing Data to GIS Studies of Land Use, Land Cover, and Vegetation Mapping in the State of Hawaii

    Science.gov (United States)

    Hogan, Christine A.

    1996-01-01

    A land cover-vegetation map with a base classification system for remote sensing use in a tropical island environment was produced of the island of Hawaii for the State of Hawaii to evaluate whether or not useful land cover information can be derived from Landsat TM data. In addition, an island-wide change detection mosaic combining a previously created 1977 MSS land classification with the TM-based classification was produced. In order to reach the goal of transferring remote sensing technology to State of Hawaii personnel, a pilot project was conducted while training State of Hawaii personnel in remote sensing technology and classification systems. Spectral characteristics of young island land cover types were compared to determine if there are differences in vegetation types on lava, vegetation types on soils, and barren lava from soils, and if they can be detected remotely, based on differences in pigments detecting plant physiognomic type, health, stress at senescence, heat, moisture level, and biomass. Geographic information systems (GIS) and global positioning systems (GPS) were used to assist in image rectification and classification. GIS was also used to produce large-format color output maps. An interactive GIS program was written to provide on-line access to scanned photos taken at field sites. The pilot project found Landsat TM to be a credible source of land cover information for geologically young islands, and TM data bands are effective in detecting spectral characteristics of different land cover types through remote sensing. Large agriculture field patterns were resolved and mapped successfully from wildland vegetation, but small agriculture field patterns were not. Additional processing was required to work with the four TM scenes from two separate orbits which span three years, including El Nino and drought dates. Results of the project emphasized the need for further land cover and land use processing and research. Change in vegetation

  3. An integrated and open source GIS environmental management system for a protected area in the south of Portugal

    Science.gov (United States)

    Teodoro, A.; Duarte, L.; Sillero, N.; Gonçalves, J. A.; Fonte, J.; Gonçalves-Seco, L.; Pinheiro da Luz, L. M.; dos Santos Beja, N. M. R.

    2015-10-01

    Herdade da Contenda (HC), located in Moura municipality, Beja district (Alentejo province) in the south of Portugal (southwestern Iberia Peninsula), is a national hunting area with 5270ha. The development of an integrated system that aims to make the management of the natural and cultural heritage resources will be very useful for an effective management of this area. This integrated system should include the physical characterization of the territory, natural conservation, land use and land management themes, as well the cultural heritage resources. This paper presents a new tool for an integrated environmental management system of the HC, which aims to produce maps under a GIS open source environment (QGIS). The application is composed by a single button which opens a window. The window is composed by twelve menus (File, DRASTIC, Forest Fire Risk, Revised Universal Soil Loss Equation (RUSLE), Bioclimatic Index, Cultural Heritage, Fauna and Flora, Ortofoto, Normalizes Difference Vegetation Index (NDVI), Digital Elevation Model (DEM), Land Use Land Cover Cover (LULC) and Help. Several inputs are requires to generate these maps, e.g. DEM, geologic information, soil map, hydraulic conductivity information, LULC map, vulnerability and economic information, NDVI. Six buttons were added to the toolbar which allows to manipulate the information in the map canvas: Zoom in, Zoom out, Pan, Print/Layout and Clear. This integrated and open source GIS environment management system was developed for the HC area, but could be easily adapted to other natural or protected area. Despite the lack of data, the methodology presented fulfills the objectives.

  4. GIS Database and Google Map of the Population at Risk of Cholangiocarcinoma in Mueang Yang District, Nakhon Ratchasima Province of Thailand.

    Science.gov (United States)

    Kaewpitoon, Soraya J; Rujirakul, Ratana; Joosiri, Apinya; Jantakate, Sirinun; Sangkudloa, Amnat; Kaewthani, Sarochinee; Chimplee, Kanokporn; Khemplila, Kritsakorn; Kaewpitoon, Natthawut

    2016-01-01

    Cholangiocarcinoma (CCA) is a serious problem in Thailand, particularly in the northeastern and northern regions. Database of population at risk are need required for monitoring, surveillance, home health care, and home visit. Therefore, this study aimed to develop a geographic information system (GIS) database and Google map of the population at risk of CCA in Mueang Yang district, Nakhon Ratchasima province, northeastern Thailand during June to October 2015. Populations at risk were screened using the Korat CCA verbal screening test (KCVST). Software included Microsoft Excel, ArcGIS, and Google Maps. The secondary data included the point of villages, sub-district boundaries, district boundaries, point of hospital in Mueang Yang district, used for created the spatial databese. The populations at risk for CCA and opisthorchiasis were used to create an arttribute database. Data were tranfered to WGS84 UTM ZONE 48. After the conversion, all of the data were imported into Google Earth using online web pages www.earthpoint.us. Some 222 from a 4,800 population at risk for CCA constituted a high risk group. Geo-visual display available at following www.google.com/maps/d/u/0/ edit?mid=zPxtcHv_iDLo.kvPpxl5mAs90 and hl=th. Geo-visual display 5 layers including: layer 1, village location and number of the population at risk for CCA; layer 2, sub-district health promotion hospital in Mueang Yang district and number of opisthorchiasis; layer 3, sub-district district and the number of population at risk for CCA; layer 4, district hospital and the number of population at risk for CCA and number of opisthorchiasis; and layer 5, district and the number of population at risk for CCA and number of opisthorchiasis. This GIS database and Google map production process is suitable for further monitoring, surveillance, and home health care for CCA sufferers.

  5. New resources for smart food retail mapping a GIS and the open source perspective

    Directory of Open Access Journals (Sweden)

    Eric Vaz

    2016-12-01

    Full Text Available In this paper it is demonstrated that open-source GIS software may contribute to allow nonprofit organizations and local food retailers to strategically locate food shops. This impacts realtors and other businesses as well. Areas are covered and clients served avoiding food deserts and increasing security in the health sector (Barnes et al., 2016. The methodology demonstrates how mapping may be processed, allowing people to get a good understanding of the food distribution. Also, decision making at corporate level improves due to better connecting to local production and organic retailers and to better reach out to local consumption. A major consequence of this exercise is likewise to educate users on the negative impacts of food deserts on health and improve awareness supporting the design and integration of sustainable and healthy lifestyles (Vaz and Zhao, 2016. This novel proposal that combines spatial and locational data visualization (McIver, 2003, as well as sharing of information of healthy food retailers within the urban nexus (Morgan and Sonnino, 2010 engage communities actively to participate in the integration of new consumer behaviours and make them clearly expressed.

  6. Determination, source identification and GIS mapping for nitrate concentration in ground water from Bara aquifer

    International Nuclear Information System (INIS)

    Elfaki Taha, G. M. E.

    2010-09-01

    The study was carried-out determine the level of nitrate concentration in well water from Bara aquifer in North Kordofan State. The analysis was conducted for 69 wells from different villages within Bara basin. Physical characteristics were measured including pH, electrical conductivity and dissolved oxygen. Spectrophotometric analysis was used to determine nitrate, nitrite and ammonia. Chloride and hardness were determined telemetrically and flame photometer was used for major elements namely sodium and potassium, whereas atomic absorption spectroscopy was used for trace elements namely iron, manganese, zinc and copper. Results revealed that nitrate concentration range from 9.68 to 891 mg/1 in sampled wells with 81% exceeding the maximum permissible limits set for drinking water by WHO and SSMO. Animal waste and organic soil nitrogen were found to be the sources of nitrate in these wells as indicated by 15 N%. Majority of wells with high nitrate are located in the north and the north-east part of the study area as shown by GIS predictive map. On the average, the concentrations of sodium, potassium, calcium, magnesium, iron, manganese, zinc and copper were found to be within WHO limits for drinking water. (Author)

  7. MAPPING LOCAL CLIMATE ZONES WITH A VECTOR-BASED GIS METHOD

    Directory of Open Access Journals (Sweden)

    E. Lelovics

    2013-03-01

    Full Text Available In this study we determined Local Climate Zones in a South-Hungarian city, using vector-based and raster-based databases. We calculated seven of the originally proposed ten physical (geometric, surface cover and radiative properties for areas which are based on the mobile temperature measurement campaigns earlier carried out in this city.As input data we applied 3D building database (earlier created with photogrammetric methods, 2D road database, topographic map, aerial photographs, remotely sensed reflectance information from RapidEye satellite image and our local knowledge about the area. The values of the properties were calculated by GIS methods developed for this purpose.We derived for the examined areas and applied for classification sky view factor, mean building height, terrain roughness class, building surface fraction, pervious surface fraction, impervious surface fraction and albedo.Six built and one land cover LCZ classes could be detected with this method on our study area. From each class one circle area was selected, which is representative for that class. Their thermal reactions were examined with the application of mobile temperature measurement dataset. The comparison was made in cases, when the weather was clear and calm and the surface was dry. We found that compact built-in types have more temperature surplus than open ones, and midrise types also have more than lowrise ones. According to our primary results, these categories provide a useful opportunity for intra- and inter-urban comparisons.

  8. WISDOM: A GIS-based supply demand mapping tool for woodfuel management

    International Nuclear Information System (INIS)

    Masera, Omar; Ghilardi, Adrian; Drigo, Rudi; Angel Trossero, Miguel

    2006-01-01

    In this paper, it is argued that adequately assessing the implications of the current patterns of woodfuel production and use, and the sustainable potentials of woodfuel resources, requires a holistic view and a better knowledge of the spatial patterns of woodfuel supply and demand. There is a need to conduct multi-scale spatially explicit analyses of woodfuel supply and demand that are able to articulate local heterogeneity at the regional and national levels. Studies that provide full-country coverage and are based on consistent integration of data at lower geographical scales are woefully lacking. This paper describes the Woodfuel Integrated Supply/Demand Overview Mapping model (WISDOM). This is a GIS-based tool, aimed at analyzing woodfuel demand and supply spatial patterns from a new perspective that includes: (a) the assembling of existing but dispersed information into single data sets, (b) a modular integration of these data sets, based on the analysis of key variables associated with woodfuel demand and supply patterns, and (c) a multiple-scale and spatially explicit representation of the results, in order to rank or highlight areas in which several criteria of interest coincide. The final objective of WISDOM is to assess the sustainability of woodfuel as a renewable and widespread energy source, while supporting strategic planning and policy formulation. Three case studies for Mexico, Slovenia, and Senegal illustrate the practical implementation and innovative results of using WISDOM. (author)

  9. Land-use planning of Volyn region (Ukraine) using Geographic Information Systems (GIS) technologies

    Science.gov (United States)

    Strielko, Irina; Pereira, Paulo

    2014-05-01

    Land-use development planning is carried out in order to create a favourable environment for human life, sustainable socioeconomic and spatial development. Landscape planning is an important part of land-use development that aims to meet the fundamental principles of sustainable development. Geographic Information Systems (GIS) is a fundamental tool to make a better landscape planning at different territorial levels, providing data and maps to support decision making. The objective of this work is to create spatio-temporal, territorial and ecological model of development of Volyn region (Ukraine). It is based on existing spatial raster and vector data and includes the analysis of territory dynamics as the aspects responsible for it. A spatial analyst tool was used to zone the areas according to their environmental components and economic activity. This analysis is fundamental to define the basic parameters of sustainability of Volyn region. To carry out this analysis, we determined the demographic capacity of districts and the analysis of spatial parameters of land use. On the basis of the existing natural resources, we observed that there is a need of landscape protection and integration of more are natural areas in the Pan-European Ecological Network. Using GIS technologies to landscape planning in Volyn region, allowed us to identify, natural areas of interest, contribute to a better resource management and conflict resolution. Geographic Information Systems will help to formulate and implement landscape policies, reform the existing administrative system of Volyn region and contribute to a better sustainable development.

  10. China Dimensions Data Collection: China County-Level Data on Population (Census) and Agriculture, Keyed to 1:1M GIS Map

    Data.gov (United States)

    National Aeronautics and Space Administration — China County-Level Data on Population (Census) and Agriculture, Keyed To 1:1M GIS Map consists of census, agricultural economic, and boundary data for the...

  11. China Dimensions Data Collection: China County-Level Data from Provincial Economic Yearbooks, Keyed to 1:1M GIS Map

    Data.gov (United States)

    National Aeronautics and Space Administration — China County-Level Data on Provincial Economic Yearbooks, Keyed To 1:1M GIS Map consists of socioeconomic and boundary data for the administrative regions of China...

  12. Using GIS in an Earth Sciences Field Course for Quantitative Exploration, Data Management and Digital Mapping

    Science.gov (United States)

    Marra, Wouter A.; van de Grint, Liesbeth; Alberti, Koko; Karssenberg, Derek

    2017-01-01

    Field courses are essential for subjects like Earth Sciences, Geography and Ecology. In these topics, GIS is used to manage and analyse spatial data, and offers quantitative methods that are beneficial for fieldwork. This paper presents changes made to a first-year Earth Sciences field course in the French Alps, where new GIS methods were…

  13. Environmental hazard mapping using GIS and AHP - A case study of Dong Trieu District in Quang Ninh Province, Vietnam

    Science.gov (United States)

    Anh, N. K.; Phonekeo, V.; My, V. C.; Duong, N. D.; Dat, P. T.

    2014-02-01

    In recent years, Vietnamese economy has been growing up rapidly and caused serious environmental quality plunging, especially in industrial and mining areas. It brings an enormous threat to a socially sustainable development and the health of human beings. Environmental quality assessment and protection are complex and dynamic processes, since it involves spatial information from multi-sector, multi-region and multi-field sources and needs complicated data processing. Therefore, an effective environmental protection information system is needed, in which considerable factors hidden in the complex relationships will become clear and visible. In this paper, the authors present the methodology which was used to generate environmental hazard maps which are applied to the integration of Analytic Hierarchy Process (AHP) and Geographical Information system (GIS). We demonstrate the results that were obtained from the study area in Dong Trieu district. This research study has contributed an overall perspective of environmental quality and identified the devastated areas where the administration urgently needs to establish an appropriate policy to improve and protect the environment.

  14. Environmental hazard mapping using GIS and AHP – A case study of Dong Trieu District in Quang Ninh Province, Vietnam

    International Nuclear Information System (INIS)

    Anh, N K; Duong, N D; Phonekeo, V; My, V C; Dat, P T

    2014-01-01

    In recent years, Vietnamese economy has been growing up rapidly and caused serious environmental quality plunging, especially in industrial and mining areas. It brings an enormous threat to a socially sustainable development and the health of human beings. Environmental quality assessment and protection are complex and dynamic processes, since it involves spatial information from multi-sector, multi-region and multi-field sources and needs complicated data processing. Therefore, an effective environmental protection information system is needed, in which considerable factors hidden in the complex relationships will become clear and visible. In this paper, the authors present the methodology which was used to generate environmental hazard maps which are applied to the integration of Analytic Hierarchy Process (AHP) and Geographical Information system (GIS). We demonstrate the results that were obtained from the study area in Dong Trieu district. This research study has contributed an overall perspective of environmental quality and identified the devastated areas where the administration urgently needs to establish an appropriate policy to improve and protect the environment

  15. GIS in Evaluation: Utilizing the Power of Geographic Information Systems to Represent Evaluation Data

    Science.gov (United States)

    Azzam, Tarek; Robinson, David

    2013-01-01

    This article provides an introduction to geographic information systems (GIS) and how the technology can be used to enhance evaluation practice. As a tool, GIS enables evaluators to incorporate contextual features (such as accessibility of program sites or community health needs) into evaluation designs and highlights the interactions between…

  16. Student Perspectives on the Teaching of Geographical Information Systems (GIS) in Geography Degrees

    Science.gov (United States)

    Seremet, Mehmet; Chalkley, Brian

    2015-01-01

    In an era when graduate employability is a key concern, the teaching of geographical information systems (GIS) has become a subject of considerable interest. This paper reports on a study of the GIS student learning experience using student survey data from six UK geography undergraduate programmes. The findings show that although students'…

  17. Geographic Information System (GIS) Applications at a Multi-Site Community College.

    Science.gov (United States)

    Pottle, Laura

    This report presents the Front Range Community College (FRCC) (Colorado) Office of Institutional Research's recent expansion of its data analysis and reporting capabilities to include a geographic information system (GIS). Utilizing ArcView GIS software, the college is better able to visualize institutional and environmental data. They have…

  18. An Offline-Online Android Application for Hazard Event Mapping Using WebGIS Open Source Technologies

    Science.gov (United States)

    Olyazadeh, Roya; Jaboyedoff, Michel; Sudmeier-Rieux, Karen; Derron, Marc-Henri; Devkota, Sanjaya

    2016-04-01

    Nowadays, Free and Open Source Software (FOSS) plays an important role in better understanding and managing disaster risk reduction around the world. National and local government, NGOs and other stakeholders are increasingly seeking and producing data on hazards. Most of the hazard event inventories and land use mapping are based on remote sensing data, with little ground truthing, creating difficulties depending on the terrain and accessibility. Open Source WebGIS tools offer an opportunity for quicker and easier ground truthing of critical areas in order to analyse hazard patterns and triggering factors. This study presents a secure mobile-map application for hazard event mapping using Open Source WebGIS technologies such as Postgres database, Postgis, Leaflet, Cordova and Phonegap. The objectives of this prototype are: 1. An Offline-Online android mobile application with advanced Geospatial visualisation; 2. Easy Collection and storage of events information applied services; 3. Centralized data storage with accessibility by all the service (smartphone, standard web browser); 4. Improving data management by using active participation in hazard event mapping and storage. This application has been implemented as a low-cost, rapid and participatory method for recording impacts from hazard events and includes geolocation (GPS data and Internet), visualizing maps with overlay of satellite images, viewing uploaded images and events as cluster points, drawing and adding event information. The data can be recorded in offline (Android device) or online version (all browsers) and consequently uploaded through the server whenever internet is available. All the events and records can be visualized by an administrator and made public after approval. Different user levels can be defined to access the data for communicating the information. This application was tested for landslides in post-earthquake Nepal but can be used for any other type of hazards such as flood, avalanche

  19. A Decision Support System for Business Location Based on Open GIS Technology and Data

    Directory of Open Access Journals (Sweden)

    Cornel Ghita

    2014-06-01

    Full Text Available This article presents the architecture, features, and operating mode of a DSS (Decision Support System aiming to assist entrepreneurs and managers in the process of location decision making. The research assembled concepts derived from theory, findings of empirical studies, together with open GIS (Geographical Information System software and data, and modelled them into a DSS software tool, according to an original methodology and design. The users are guided step-by-step to input information on their businesses into the DSS (industry, preferences for land-use areas and facility types, weights of key location factors, and are returned two sets of results: one based on own options, and another one aggregate for the industry they operate in. The results consist in the top five locations for the user's firm, as well as for the industry, depicted both in a graphical report (map and a text report (explanation of results.

  20. Evaluation of SOVAT: an OLAP-GIS decision support system for community health assessment data analysis.

    Science.gov (United States)

    Scotch, Matthew; Parmanto, Bambang; Monaco, Valerie

    2008-06-09

    Data analysis in community health assessment (CHA) involves the collection, integration, and analysis of large numerical and spatial data sets in order to identify health priorities. Geographic Information Systems (GIS) enable for management and analysis using spatial data, but have limitations in performing analysis of numerical data because of its traditional database architecture.On-Line Analytical Processing (OLAP) is a multidimensional datawarehouse designed to facilitate querying of large numerical data. Coupling the spatial capabilities of GIS with the numerical analysis of OLAP, might enhance CHA data analysis. OLAP-GIS systems have been developed by university researchers and corporations, yet their potential for CHA data analysis is not well understood. To evaluate the potential of an OLAP-GIS decision support system for CHA problem solving, we compared OLAP-GIS to the standard information technology (IT) currently used by many public health professionals. SOVAT, an OLAP-GIS decision support system developed at the University of Pittsburgh, was compared against current IT for data analysis for CHA. For this study, current IT was considered the combined use of SPSS and GIS ("SPSS-GIS"). Graduate students, researchers, and faculty in the health sciences at the University of Pittsburgh were recruited. Each round consisted of: an instructional video of the system being evaluated, two practice tasks, five assessment tasks, and one post-study questionnaire. Objective and subjective measurement included: task completion time, success in answering the tasks, and system satisfaction. Thirteen individuals participated. Inferential statistics were analyzed using linear mixed model analysis. SOVAT was statistically significant (alpha = .01) from SPSS-GIS for satisfaction and time (p OLAP-GIS decision support systems as a valuable tool for CHA data analysis.

  1. A hydrogeologic map of the Death Valley region, Nevada, and California, developed using GIS techniques

    International Nuclear Information System (INIS)

    Faunt, C.C.; D'Agnese, F.A.; Turner, A.K.

    1997-01-01

    In support of Yucca Mountain site characterization studies, a hydrogeologic framework was developed, and a hydrogeologic map was constructed for the Death Valley region. The region, covering approximately 100,000 km 2 along the Nevada-California border near Las Vegas, is characterized by isolated mountain ranges juxtaposed against broad, alluvium-filled valleys. Geologic conditions are typical of the Basin and Range Province; a variety of sedimentary and igneous intrusive and extrusive rocks have been subjected to both compressional and extensional deformation. The regional ground-water flow system can best be described as a series of connected intermontane basins in which ground-water flow occurs in basin-fill deposits, carbonate rocks, clastic rocks, and volcanic rocks. Previous investigations have developed more site-specific hydrogeologic relationships; however, few have described all the lithologies within the Death Valley regional ground-water flow system. Information required to characterize the hydrogeologic units in the region was obtained from regional geologic maps and reports. Map data were digitized from regional geologic maps and combined into a composite map using a geographic information system. This map was simplified to show 10 laterally extensive hydrogeologic units with distinct hydrologic properties. The hydraulic conductivity values for the hydrogeologic units range over 15 orders of magnitude due to the variability in burial depth and degree of fracturing

  2. Video-based Mobile Mapping System Using Smartphones

    Science.gov (United States)

    Al-Hamad, A.; Moussa, A.; El-Sheimy, N.

    2014-11-01

    The last two decades have witnessed a huge growth in the demand for geo-spatial data. This demand has encouraged researchers around the world to develop new algorithms and design new mapping systems in order to obtain reliable sources for geo-spatial data. Mobile Mapping Systems (MMS) are one of the main sources for mapping and Geographic Information Systems (GIS) data. MMS integrate various remote sensing sensors, such as cameras and LiDAR, along with navigation sensors to provide the 3D coordinates of points of interest from moving platform (e.g. cars, air planes, etc.). Although MMS can provide accurate mapping solution for different GIS applications, the cost of these systems is not affordable for many users and only large scale companies and institutions can benefits from MMS systems. The main objective of this paper is to propose a new low cost MMS with reasonable accuracy using the available sensors in smartphones and its video camera. Using the smartphone video camera, instead of capturing individual images, makes the system easier to be used by non-professional users since the system will automatically extract the highly overlapping frames out of the video without the user intervention. Results of the proposed system are presented which demonstrate the effect of the number of the used images in mapping solution. In addition, the accuracy of the mapping results obtained from capturing a video is compared to the same results obtained from using separate captured images instead of video.

  3. Landslide susceptibility mapping using AHP method and GIS in the peninsula of Tangier (Rif-northern morocco

    Directory of Open Access Journals (Sweden)

    Ait Brahim L

    2018-01-01

    Full Text Available The peninsula of Tangier (Northern Morocco is submitted to a significant number of landslides each year due to its lithological, structural and morphological complexity; which cause a lot of damage to the road network and other related infrastructure. The main objective of this study is to create a landslide indexed susceptibility map of Tangier peninsula, by using AHP (Analytical Hierarchical Processes model to calculate each factor’s weight. The work is made via GIS by using an ArcGIS AHP extension. In the current research, First of all, the four main types of landslides were identified and mapped from existing documents, works and new data which came from either remote sensing or fieldwork. Lithology, land use, slope, hypsometry, exposure, fault density and drainage network density were used as main parameters controlling the occurrence of the selected landslides. Then, afterward, each parameter is classified into a number of significant classes based on their relative influence on gravitational movement genesis. The validity of the susceptibility zoning map which is obtained through linear summation of indexed maps was tested and cross-checked by inventoried and studied landslides. The obtained landslide susceptibility map constitutes a powerful decision-making tool in land-use planning, i.e. New highways, secondary highways, railways, etc. within the national development program in the Northern provinces. It is a necessary step for the landslides hazard assessment in the Tangier peninsula in northern Morocco.

  4. Evaluation of Wind Energy Production in Texas using Geographic Information Systems (GIS)

    Science.gov (United States)

    Ferrer, L. M.

    2017-12-01

    Texas has the highest installed wind capacity in the United States. The purpose of this research was to estimate the theoretical wind turbine energy production and the utilization ratio of wind turbines in Texas. Windfarm data was combined applying Geographic Information System (GIS) methodology to create an updated GIS wind turbine database, including location and technical specifications. Applying GIS diverse tools, the windfarm data was spatially joined with National Renewable Energy Laboratory (NREL) wind data to calculate the wind speed at each turbine hub. The power output for each turbine at the hub wind speed was evaluated by the GIS system according the respective turbine model power curve. In total over 11,700 turbines are installed in Texas with an estimated energy output of 60 GWh per year and an average utilization ratio of 0.32. This research indicates that applying GIS methodologies will be crucial in the growth of wind energy and efficiency in Texas.

  5. Using Geographic Information Systems (GIS) to assess outcome disparities in patients with type 2 diabetes and hyperlipidemia.

    Science.gov (United States)

    Geraghty, Estella M; Balsbaugh, Thomas; Nuovo, Jim; Tandon, Sanjeev

    2010-01-01

    Geographic information systems (GIS) tools can help expand our understanding of disparities in health outcomes within a community. The purpose of this project was (1) to demonstrate the methods to link a disease management registry with a GIS mapping and analysis program, (2) to address the challenges that occur when performing this link, and (3) to analyze the outcome disparities resulting from this assessment tool in a population of patients with type 2 diabetes mellitus. We used registry data derived from the University of California Davis Health System's electronic medical record system to identify patients with diabetes mellitus from a network of 13 primary care clinics in the greater Sacramento area. This information was converted to a database file for use in the GIS software. Geocoding was performed and after excluding those who had unknown home addresses we matched 8528 unique patient records with their respective home addresses. Socioeconomic and demographic data were obtained from the Geolytics, Inc. (East Brunswick, NJ), a provider of US Census Bureau data, with 2008 estimates and projections. Patient, socioeconomic, and demographic data were then joined to a single database. We conducted regression analysis assessing A1c level based on each patient's demographic and laboratory characteristics and their neighborhood characteristics (socioeconomic status [SES] quintile). Similar analysis was done for low-density lipoprotein cholesterol. After excluding ineligible patients, the data from 7288 patients were analyzed. The most notable findings were as follows: There was, there was found an association between neighborhood SES and A1c. SES was not associated with low-density lipoprotein control. GIS methodology can assist primary care physicians and provide guidance for disease management programs. It can also help health systems in their mission to improve the health of a community. Our analysis found that neighborhood SES was a barrier to optimal glucose

  6. Automatic generation of water distribution systems based on GIS data.

    Science.gov (United States)

    Sitzenfrei, Robert; Möderl, Michael; Rauch, Wolfgang

    2013-09-01

    In the field of water distribution system (WDS) analysis, case study research is needed for testing or benchmarking optimisation strategies and newly developed software. However, data availability for the investigation of real cases is limited due to time and cost needed for data collection and model setup. We present a new algorithm that addresses this problem by generating WDSs from GIS using population density, housing density and elevation as input data. We show that the resulting WDSs are comparable to actual systems in terms of network properties and hydraulic performance. For example, comparing the pressure heads for an actual and a generated WDS results in pressure head differences of ±4 m or less for 75% of the supply area. Although elements like valves and pumps are not included, the new methodology can provide water distribution systems of varying levels of complexity (e.g., network layouts, connectivity, etc.) to allow testing design/optimisation algorithms on a large number of networks. The new approach can be used to estimate the construction costs of planned WDSs aimed at addressing population growth or at comparisons of different expansion strategies in growth corridors.

  7. First level seismic microzonation map of Chennai city – a GIS approach

    Directory of Open Access Journals (Sweden)

    G. P. Ganapathy

    2011-02-01

    Full Text Available Chennai city is the fourth largest metropolis in India, is the focus of economic, social and cultural development and it is the capital of the State of Tamil Nadu. The city has a multi-dimensional growth in development of its infrastructures and population. The area of Chennai has experienced moderate earthquakes in the historical past. Also the Bureau of Indian Standard upgraded the seismic status of Chennai from Low Seismic Hazard (Zone II to Moderate Seismic Hazard (Zone III–(BIS: 1893 (2001. In this connection, a first level seismic microzonation map of Chennai city has been produced with a GIS platform using the themes, viz, Peak Ground Acceleration (PGA, Shear wave velocity at 3 m, Geology, Ground water fluctuation and bed rock depth. The near potential seismic sources were identified from the remote-sensing study and seismo-tectonic details from published literatures. The peak ground acceleration for these seismic sources were estimated based on the attenuation relationship and the maximum PGA for Chennai is 0.176 g. The groundwater fluctuation of the city varies from 0–4 m below ground level. The depth to bedrock configuration shows trough and ridges in the bedrock topography all over the city. The seismic microzonation analysis involved grid datasets (the discrete datasets from different themes were converted to grids to compute the final seismic hazard grid through integration and weightage analysis of the source themes. The Chennai city has been classified into three broad zones, viz, High, Moderate and Low Seismic Hazard. The High seismic Hazard concentrated in a few places in the western central part of the city. The moderate hazard areas are oriented in NW-SE direction in the Western part. The southern and eastern part will have low seismic hazard. The result of the study may be used as first-hand information in selecting the appropriate earthquake resistant features in designing the forthcoming new buildings against seismic

  8. Air quality mapping using GIS and economic evaluation of health impact for Mumbai City, India.

    Science.gov (United States)

    Kumar, Awkash; Gupta, Indrani; Brandt, Jørgen; Kumar, Rakesh; Dikshit, Anil Kumar; Patil, Rashmi S

    2016-05-01

    Mumbai, a highly populated city in India, has been selected for air quality mapping and assessment of health impact using monitored air quality data. Air quality monitoring networks in Mumbai are operated by National Environment Engineering Research Institute (NEERI), Maharashtra Pollution Control Board (MPCB), and Brihanmumbai Municipal Corporation (BMC). A monitoring station represents air quality at a particular location, while we need spatial variation for air quality management. Here, air quality monitored data of NEERI and BMC were spatially interpolated using various inbuilt interpolation techniques of ArcGIS. Inverse distance weighting (IDW), Kriging (spherical and Gaussian), and spline techniques have been applied for spatial interpolation for this study. The interpolated results of air pollutants sulfur dioxide (SO2), nitrogen dioxide (NO2) and suspended particulate matter (SPM) were compared with air quality data of MPCB in the same region. Comparison of results showed good agreement for predicted values using IDW and Kriging with observed data. Subsequently, health impact assessment of a ward was carried out based on total population of the ward and air quality monitored data within the ward. Finally, health cost within a ward was estimated on the basis of exposed population. This study helps to estimate the valuation of health damage due to air pollution. Operating more air quality monitoring stations for measurement of air quality is highly resource intensive in terms of time and cost. The appropriate spatial interpolation techniques can be used to estimate concentration where air quality monitoring stations are not available. Further, health impact assessment for the population of the city and estimation of economic cost of health damage due to ambient air quality can help to make rational control strategies for environmental management. The total health cost for Mumbai city for the year 2012, with a population of 12.4 million, was estimated as USD

  9. GIS - Based data presentation and interactive communication system for public involvement in EIA

    International Nuclear Information System (INIS)

    Oprea, I.; Oprea, M.; Guta, V.; Pirvu, V.

    2001-01-01

    The data presentation and interactive communication system has as main task to integrate technical and administrative information, as well as to ensure an efficient public participation. The system can achieve desired inter-operability between specialists, government and public in decision-making and environmental impact assessment (EIA). It incorporates different modules relative to specific types of parameters and authorities involved. The GIS-based system provides mapping, database, automatic information collection and advanced presentation techniques. It includes a graphically oriented executive support, which has the ability to present information by geographical representation of the zones on the map. The public opinion is taking into account by consideration of alternatives and providing access to the monitoring of environmental effects. The system offers an effective way to avoid negative reactions by interactive communication based on real-time information exchange. The system can be integrated into national or international management systems, being a useful tool for an efficient communication, handling and exchanging a vast amount of information. (authors)

  10. The iMars WebGIS - Spatio-Temporal Data Queries and Single Image Map Web Services

    Science.gov (United States)

    Walter, Sebastian; Steikert, Ralf; Schreiner, Bjoern; Muller, Jan-Peter; van Gasselt, Stephan; Sidiropoulos, Panagiotis; Lanz-Kroechert, Julia

    2017-04-01

    Server backend which in turn delivers the response back to the MapCache instance. Web frontend: We have implemented a web-GIS frontend based on various OpenLayers components. The basemap is a global color-hillshaded HRSC bundle-adjusted DTM mosaic with a resolution of 50 m per pixel. The new bundle-block-adjusted qudrangle mosaics of the MC-11 quadrangle, both image and DTM, are included with opacity slider options. The layer user interface has been adapted on the base of the ol3-layerswitcher and extended by foldable and switchable groups, layer sorting (by resolution, by time and alphabeticallly) and reordering (drag-and-drop). A collapsible time panel accomodates a time slider interface where the user can filter the visible data by a range of Mars or Earth dates and/or by solar longitudes. The visualisation of time-series of single images is controlled by a specific toolbar enabling the workflow of image selection (by point or bounding box), dynamic image loading and playback of single images in a video player-like environment. During a stress-test campaign we could demonstrate that the system is capable of serving up to 10 simultaneous users on its current lightweight development hardware. It is planned to relocate the software to more powerful hardware by the time of this conference. Conclusions/Outlook: The iMars webGIS is an expert tool for the detection and visualization of surface changes. We demonstrate a technique to dynamically retrieve and display single images based on the time-series structure of the data. Together with the multi-temporal database and its MapServer/MapCache backend it provides a stable and high performance environment for the dissemination of the various iMars products. Acknowledgements: This research has received funding from the EU's FP7 Programme under iMars 607379 and by the German Space Agency (DLR Bonn), grant 50 QM 1301 (HRSC on Mars Express).

  11. USING GIS FOR DEVELOPING INFORMATION SYSTEM FOR INVENTORY AND CARE OF ORNAMENTAL PLANTS IN THE NIKITSKY BOTANICAL GARDENS (CRIMEA

    Directory of Open Access Journals (Sweden)

    Yu. V. Plugatar

    2017-01-01

    Full Text Available The article provides the data on creating information system (IS for stocktaking and handling the ornamental woody and herbaceous plants at the Nikitsky Botanical Gardens (NBG on the basis of a database (DB and a geographic information system (GIS for addressing the problems related to the preservation of biological diversity and sustainable development of the territory.The DB is being created on the basis of a relation model using of an analytic language and a graphic method of displaying the model “object – property – relation” using International Transfer Format (ITF for coding standard fields. For formation of web maps, the electronic layers are exported to the web-GIS on the NextGIS Web platform and configured into the thematic web maps.The information on the infological DB model has been provided. Functions to be performed by the IS and its final components have been described. The IS will make it possible to assess the current status of the NBG’s collection funds and plan the collection policy aimed at rehabilitating of plants’ gene pool and enriching the cultivated flora at the Southern Coast of Crimea. 

  12. A study of radionuclide dispersion by river systems, using GIS and remote sensing techniques

    International Nuclear Information System (INIS)

    Borghuis, Sander; Brown, Justin; Steenhuisen, Frits; Skorve, Johnny

    2000-01-01

    The Krasnoyarsk Mining and Chemical Combine in Zheleznogorsk, Russia, is situated on the banks of the Yenisey river. The combine consists of three RBMK-type graphite moderate reactors, a reprocessing plant for the production of weapons-grade plutonium and storage facilities for nuclear waste. Discharges of radionuclides into the Yenisey river were either part of normal operation procedures or caused by accidental releases (Strand et al., 1997). So far, little is known about the transport and fate of the radioactive contaminants in the areas downstream of the Krasnoyarsk CC that are influenced by the Yenisey river system. Aim is to comprehend the dispersion of radionuclides through the river system. Remotely sensed and field study information are combined in a geographical information system (GIS) to study the processes leading to the dispersion of sediment-bound radionuclides carried by the river system. Since the extent of the study area is several thousands or kilometres of river and adjacent flood plains, use is made of a record of remotely sensed (satellite) images that are handled by the GIS. Panchromatic, high resolution satellite images as well as multispectral Landsat MSS and TM images were compiled for the area of interest. The panchromatic images were taken in a period during which the facility was in operation (1960-1972) and obtained for intervals of circa 6 months. A time series of satellite images enables the identification of erosion and sedimentation zones. The behaviour and fate of particle-reactive radionuclides, e.g. 239,240 Pu and to large extent 137 Cs, will be closely related to the movement of sediment. With respect to the behaviour and fate of more conservative radionuclides as 90 Sr, information is required accounting for fractionation between the particulate and aqueous phases. Stereo images are used to comprehend the geomorphology of the Yenisey river systems, focused on classification of sedimentary deposits. Landsat MSS and TM with five

  13. Geographic information systems (GIS) for Health Promotion and Public Health: a review.

    Science.gov (United States)

    Nykiforuk, Candace I J; Flaman, Laura M

    2011-01-01

    The purpose of this literature review is to identify how geographic information system (GIS) applications have been used in health-related research and to critically examine the issues, strengths, and challenges inherent to those approaches from the lenses of health promotion and public health. Through the review process, conducted in 2007, it is evident that health promotion and public health applications of GIS can be generally categorized into four predominant themes: disease surveillance (n = 227), risk analysis (n = 189), health access and planning (n = 138), and community health profiling (n = 115). This review explores how GIS approaches have been used to inform decision making and discusses the extent to which GIS can be applied to address health promotion and public health questions. The contribution of this literature review will be to generate a broader understanding of how GIS-related methodological techniques and tools developed in other disciplines can be meaningfully applied to applications in public health policy, promotion, and practice.

  14. Groundwater quality mapping using geographic information system ...

    African Journals Online (AJOL)

    Spatial variations in ground water quality in the corporation area of Gulbarga City located in the northern part of Karnataka State, India, have been studied using geographic information system (GIS) technique. GIS, a tool which is used for storing, analyzing and displaying spatial data is also used for investigating ground ...

  15. The Maryland Coastal Plain Aquifer Information System: A GIS-based tool for assessing groundwater resources

    Science.gov (United States)

    Andreasen, David C.; Nardi, Mark R.; Staley, Andrew W.; Achmad, Grufron; Grace, John W.

    2016-01-01

    Groundwater is the source of drinking water for ∼1.4 million people in the Coastal Plain Province of Maryland (USA). In addition, groundwater is essential for commercial, industrial, and agricultural uses. Approximately 0.757 × 109 L d–1 (200 million gallons/d) were withdrawn in 2010. As a result of decades of withdrawals from the coastal plain confined aquifers, groundwater levels have declined by as much as 70 m (230 ft) from estimated prepumping levels. Other issues posing challenges to long-term groundwater sustainability include degraded water quality from both man-made and natural sources, reduced stream base flow, land subsidence, and changing recharge patterns (drought) caused by climate change. In Maryland, groundwater supply is managed primarily by the Maryland Department of the Environment, which seeks to balance reasonable use of the resource with long-term sustainability. The chief goal of groundwater management in Maryland is to ensure safe and adequate supplies for all current and future users through the implementation of appropriate usage, planning, and conservation policies. To assist in that effort, the geographic information system (GIS)–based Maryland Coastal Plain Aquifer Information System was developed as a tool to help water managers access and visualize groundwater data for use in the evaluation of groundwater allocation and use permits. The system, contained within an ESRI ArcMap desktop environment, includes both interpreted and basic data for 16 aquifers and 14 confining units. Data map layers include aquifer and ­confining unit layer surfaces, aquifer extents, borehole information, hydraulic properties, time-series groundwater-level data, well records, and geophysical and lithologic logs. The aquifer and confining unit layer surfaces were generated specifically for the GIS system. The system also contains select groundwater-quality data and map layers that quantify groundwater and surface-water withdrawals. The aquifer

  16. Mapping of groundwater potential zones in the musi basin using remote sensing data and gis

    NARCIS (Netherlands)

    Ganapuram, Sreedhar; Vijaya Kumar, G.T.; Murali Krishna, I.V.; Kahya, Ercan; Demirel, M.C.

    2009-01-01

    The objective of this study is to explore the groundwater availability for agriculture in the Musi basin. Remote sensing data and geographic information system were used to locate potential zones for groundwater in the Musi basin. Various maps (i.e., base, hydrogeomorphological, geological,

  17. A GIS-based susceptibility map for landslides at the Franconian Alb, Germany

    Science.gov (United States)

    Jaeger, Daniel; Wilde, Martina; Lorenz, Michael; Terhorst, Birgit; Neuhäuser, Bettina; Damm, Bodo; Bemm, Stefan

    2014-05-01

    In general, slopes of cuesta scarps like the Franconian Alb are highly prone to slide activity due to susceptible geological and geomorphological conditions. The geological setting with alternating permeable and non-permeable bedrock results in the characteristic cuesta landforms of almost flat backslopes and steeper front slopes. Furthermore, this bipartite structure leads to a strong disposition for mass movements. The slopes of the study area near the town of Ebermannstadt are affected by different types of mass movements, such as topples, slides, lateral spreads and flows, either in single or in combined occurrence. In the years 1625, 1957, 1961 and 1979, four large landslides took place in the area of Ebermannstadt, reaching close to the town limits and causing major destructions to traffic facilities. In the study area, slopes are covered by debris and slide masses, thus they are prone to remobilization and further mass movements. In order to assess hazardous areas, a GIS-based susceptibility modelling was generated for the study area. The susceptibtibility modeling was processed with the slope stability model SINMAP (Stability Index Mapping), developed by TARBOTON (1997) and PACK et al. (1999). As SINMAP was particularly designed to model shallow translational slides, it should be well designed for describing the conditions of the study area in a sufficient way. SINMAP is based on the "infinite slope stability model" by HAMMONT et al. (1992) and MONTGOMERY & DIETRICH (1994), which focuses on the relation of stabilizing (cohesiveness, friction angle) and destabilizing (gravitation) factors on a plain surface. By adding a slope gradient, as well as soil mechanical and climatical data, indices of slope stabilities are calculated. For a more detailed modeling of the slope conditions, SINMAP computes different "calibration regions", which merge similar parameters of soil, land-use, vegetation, and geology. Due to the fact that vegetation, land-use, and soils only

  18. System of automated map design

    International Nuclear Information System (INIS)

    Ponomarjov, S.Yu.; Rybalko, S.I.; Proskura, N.I.

    1992-01-01

    Preprint 'System of automated map design' contains information about the program shell for construction of territory map, performing level line drawing of arbitrary two-dimension field (in particular, the radionuclide concentration field). The work schedule and data structures are supplied, as well as data on system performance. The preprint can become useful for experts in radioecology and for all persons involved in territory pollution mapping or multi-purpose geochemical mapping. (author)

  19. National Pipeline Mapping System

    Data.gov (United States)

    Department of Transportation — The NPMS Public Map Viewer allows the general public to view maps of transmission pipelines, LNG plants, and breakout tanks in one selected county. Distribution and...

  20. Use of a geographic information system (GIS) for targeting radon screening programs in South Dakota.

    Science.gov (United States)

    Kearfott, Kimberlee J; Whetstone, Zachary D; Rafique Mir, Khwaja M

    2016-01-01

    Because (222)Rn is a progeny of (238)U, the relative abundance of uranium may be used to predict the areas that have the potential for high indoor radon concentration and therefore determine the best areas to conduct future surveys. Geographic Information System (GIS) mapping software was used to construct maps of South Dakota that included levels of uranium concentrations in soil and stream water and uranium deposits. Maps of existing populations and the types of land were also generated. Existing data about average indoor radon levels by county taken from a databank were included for consideration. Although the soil and stream data and existing recorded average indoor radon levels were sparse, it was determined that the most likely locations of elevated indoor radon would be in the northwest and southwest corners of the state. Indoor radon levels were only available for 9 out of 66 counties in South Dakota. This sparcity of data precluded a study of correlation of radon to geological features, but further motivates the need for more testing in the state. Only actual measurements should be used to determine levels of indoor radon because of the strong roles home construction and localized geology play in radon concentration. However, the data visualization method demonstrated here is potentially useful for directing resources relating to radon screening campaigns. © The Author 2015. Published by Oxford University Press on behalf of The Japan Radiation Research Society and Japanese Society for Radiation Oncology.

  1. Use of a geographic information system (GIS) for targeting radon screening programs in South Dakota

    International Nuclear Information System (INIS)

    Kearfott, Kimberlee J.; Whetstone, Zachary D.; Mir, Khwaja M. Rafique

    2016-01-01

    Because 222 Rn is a progeny of 238 U, the relative abundance of uranium may be used to predict the areas that have the potential for high indoor radon concentration and therefore determine the best areas to conduct future surveys. Geographic Information System (GIS) mapping software was used to construct maps of South Dakota that included levels of uranium concentrations in soil and stream water and uranium deposits. Maps of existing populations and the types of land were also generated. Existing data about average indoor radon levels by county taken from a databank were included for consideration. Although the soil and stream data and existing recorded average indoor radon levels were sparse, it was determined that the most likely locations of elevated indoor radon would be in the northwest and southwest corners of the state. Indoor radon levels were only available for 9 out of 66 counties in South Dakota. This sparcity of data precluded a study of correlation of radon to geological features, but further motivates the need for more testing in the state. Only actual measurements should be used to determine levels of indoor radon because of the strong roles home construction and localized geology play in radon concentration. However, the data visualization method demonstrated here is potentially useful for directing resources relating to radon screening campaigns. (author)

  2. Analysis of earthquake parameters to generate hazard maps by integrating AHP and GIS for Küçükçekmece region

    Directory of Open Access Journals (Sweden)

    T. Erden

    2012-02-01

    Full Text Available Definition of an earthquake includes parameters with respect to region of interest. Each of those parameters has different weights on the earthquake ground motion and effect. This study examines the weight of common parameters that have an influence on the effects of earthquakes. The Analytic Hierarchy Process (AHP is used for factor weighting of each parameter and Geographic Information Systems (GIS are used for simulating the results of the AHP on a spatial environment. In this study, it is aimed to generate a hierarchical structure of the model for the simulation of an earthquake hazard map (EHM. The parameters of the EHM, which are selected by the criterion of non-correlated factors, are: topography, distance to epicenter, soil classification, liquefaction, and fault/focal mechanism. As a result of the study, weights of the parameters that affect the earthquake ground motion at the study area are determined and compared with a selected attenuation relation map.

  3. GIS-based landslide susceptibility mapping for the 2005 Kashmir earthquake region

    Science.gov (United States)

    Kamp, Ulrich; Growley, Benjamin J.; Khattak, Ghazanfar A.; Owen, Lewis A.

    2008-11-01

    The Mw 7.6 October 8, 2005 Kashmir earthquake triggered several thousand landslides throughout the Himalaya of northern Pakistan and India. These were concentrated in six different geomorphic-geologic-anthropogenic settings. A spatial database, which included 2252 landslides, was developed and analyzed using ASTER satellite imagery and geographical information system (GIS) technology. A multi-criterion evaluation was applied to determine the significance of event-controlling parameters in triggering the landslides. The parameters included lithology, faults, slope gradient, slope aspect, elevation, land cover, rivers and roads. The results showed four classes of landslide susceptibility. Furthermore, they indicated that lithology had the strongest influence on landsliding, particularly when the rock is highly fractured, such as in shale, slate, clastic sediments, and limestone and dolomite. Moreover, the proximity of the landslides to faults, rivers, and roads was also an important factor in helping to initiate failures. In addition, landslides occurred particularly in moderate elevations on south facing slopes. Shrub land, grassland, and also agricultural land were highly susceptible to failures, while forested slopes had few landslides. One-third of the study area was highly or very highly susceptible to future landsliding and requires immediate mitigation action. The rest of the region had a low or moderate susceptibility to landsliding and remains relatively stable. This study supports the view that (1) earthquake-triggered landslides are concentrated in specific zones associated with event-controlling parameters; and (2) in the western Himalaya deforestation and road construction contributed significantly to landsliding during and shortly after earthquakes.

  4. GIS-based hazard and risk maps of the Douro river basin (north-eastern Portugal

    Directory of Open Access Journals (Sweden)

    José Gomes Santos

    2015-02-01

    Full Text Available The Douro river basin, in north-eastern Portugal, is a very complex region in terms of its geomorphological structure and morphodynamics. More specifically, the region – the Port Wine-growing region, a UNESCO heritage site – is a landslide-prone area resulting from several factors intrinsic to the bedrock and its detritic cover, combined with factors capable of triggering slope instability mechanisms, such as intense rainfall and human activities. Recently, due to intense rainfall and human activities, frequent rock and mud slides occurred, some of them catastrophic, killing people and damaging property. In the last decade (2000–2010, an accurate inventory of these catastrophic events was made, showing that these events occurred near local small towns, Peso da Régua (2001, Armamar (2003 and Carrazeda de Ansiães (2007. In this paper, we present a case study using field data and Geographic Information Systems (GIS tools to evaluate landslide hazard and risk assessment following multicriteria evaluation techniques.

  5. Using GIS servers and interactive maps in spectral data sharing and administration: Case study of Ahvaz Spectral Geodatabase Platform (ASGP)

    Science.gov (United States)

    Karami, Mojtaba; Rangzan, Kazem; Saberi, Azim

    2013-10-01

    With emergence of air-borne and space-borne hyperspectral sensors, spectroscopic measurements are gaining more importance in remote sensing. Therefore, the number of available spectral reference data is constantly increasing. This rapid increase often exhibits a poor data management, which leads to ultimate isolation of data on disk storages. Spectral data without precise description of the target, methods, environment, and sampling geometry cannot be used by other researchers. Moreover, existing spectral data (in case it accompanied with good documentation) become virtually invisible or unreachable for researchers. Providing documentation and a data-sharing framework for spectral data, in which researchers are able to search for or share spectral data and documentation, would definitely improve the data lifetime. Relational Database Management Systems (RDBMS) are main candidates for spectral data management and their efficiency is proven by many studies and applications to date. In this study, a new approach to spectral data administration is presented based on spatial identity of spectral samples. This method benefits from scalability and performance of RDBMS for storage of spectral data, but uses GIS servers to provide users with interactive maps as an interface to the system. The spectral files, photographs and descriptive data are considered as belongings of a geospatial object. A spectral processing unit is responsible for evaluation of metadata quality and performing routine spectral processing tasks for newly-added data. As a result, by using internet browser software the users would be able to visually examine availability of data and/or search for data based on descriptive attributes associated to it. The proposed system is scalable and besides giving the users good sense of what data are available in the database, it facilitates participation of spectral reference data in producing geoinformation.

  6. GIS in the Classroom: Using Geographic Information Systems in Social Studies and Environmental Science. [with CD-ROM].

    Science.gov (United States)

    Alibrandi, Marsha

    Geographic Information Systems (GIS) is a computer application for urban planning, weather reporting, and geological and demographic studies. This book takes teachers and students to the cutting edge of teaching social studies and environmental education using GIS. Students can use GIS as a tool to explore, question, integrate, analyze, interpret,…

  7. Introduction of Geographical Information Systems (GIS) in Technical University Education in Ghana: Challenges and the Way Forward

    Science.gov (United States)

    Acquah, Prince C.; Asamoah, Jack N.; Konadu, Daniel D.

    2017-01-01

    Geographic Information System (GIS) continue to play very important role in improving spatial thinking skills of graduates from higher educational institutions. However, teaching and learning of GIS at the technical university level in Ghana remains very limited due to some implementation challenges. This paper reviews the implementation of GIS in…

  8. Applications of Remote Sensing and Geographic Information System (GIS) in Archaeology

    Digital Repository Service at National Institute of Oceanography (India)

    ManiMurali, R.

    The advancement of remote sensing technology and the analysing capability of Geographical Information System (GIS) can very well be used in the science of Archaeology. Though these subjects look apart, they can be studied in conjunction with each...

  9. Geographic Information System (GIS) characterizations of benthic habitats near South Florida coast (NODC Accession 0000600)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data collection uses a Geographic Information System (GIS) to organize and characterize information about benthic communities and substrates, which are...

  10. pLog enterprise-enterprise GIS-based geotechnical data management system enhancements.

    Science.gov (United States)

    2015-12-01

    Recent eorts by the Louisiana Department of Transportation and Development (DOTD) and the : Louisiana Transportation Research Center (LTRC) have developed a Geotechnical Information : Database, with a Geographic Information System (GIS) interface....

  11. Development of a Carbon Management Geographic Information System (GIS) for the United States

    Energy Technology Data Exchange (ETDEWEB)

    Howard Herzog; Holly Javedan

    2009-12-31

    In this project a Carbon Management Geographical Information System (GIS) for the US was developed. The GIS stored, integrated, and manipulated information relating to the components of carbon management systems. Additionally, the GIS was used to interpret and analyze the effect of developing these systems. This report documents the key deliverables from the project: (1) Carbon Management Geographical Information System (GIS) Documentation; (2) Stationary CO{sub 2} Source Database; (3) Regulatory Data for CCS in United States; (4) CO{sub 2} Capture Cost Estimation; (5) CO{sub 2} Storage Capacity Tools; (6) CO{sub 2} Injection Cost Modeling; (7) CO{sub 2} Pipeline Transport Cost Estimation; (8) CO{sub 2} Source-Sink Matching Algorithm; and (9) CO{sub 2} Pipeline Transport and Cost Model.

  12. GRASS GIS: The first Open Source Temporal GIS

    Science.gov (United States)

    Gebbert, Sören; Leppelt, Thomas

    2015-04-01

    GRASS GIS is a full featured, general purpose Open Source geographic information system (GIS) with raster, 3D raster and vector processing support[1]. Recently, time was introduced as a new dimension that transformed GRASS GIS into the first Open Source temporal GIS with comprehensive spatio-temporal analysis, processing and visualization capabilities[2]. New spatio-temporal data types were introduced in GRASS GIS version 7, to manage raster, 3D raster and vector time series. These new data types are called space time datasets. They are designed to efficiently handle hundreds of thousands of time stamped raster, 3D raster and vector map layers of any size. Time stamps can be defined as time intervals or time instances in Gregorian calendar time or relative time. Space time datasets are simplifying the processing and analysis of large time series in GRASS GIS, since these new data types are used as input and output parameter in temporal modules. The handling of space time datasets is therefore equal to the handling of raster, 3D raster and vector map layers in GRASS GIS. A new dedicated Python library, the GRASS GIS Temporal Framework, was designed to implement the spatio-temporal data types and their management. The framework provides the functionality to efficiently handle hundreds of thousands of time stamped map layers and their spatio-temporal topological relations. The framework supports reasoning based on the temporal granularity of space time datasets as well as their temporal topology. It was designed in conjunction with the PyGRASS [3] library to support parallel processing of large datasets, that has a long tradition in GRASS GIS [4,5]. We will present a subset of more than 40 temporal modules that were implemented based on the GRASS GIS Temporal Framework, PyGRASS and the GRASS GIS Python scripting library. These modules provide a comprehensive temporal GIS tool set. The functionality range from space time dataset and time stamped map layer management

  13. Cell Based GIS as Cellular Automata for Disaster Spreading Predictions and Required Data Systems

    Directory of Open Access Journals (Sweden)

    Kohei Arai

    2013-03-01

    Full Text Available A method for prediction and simulation based on the Cell Based Geographic Information System(GIS as Cellular Automata (CA is proposed together with required data systems, in particular metasearch engine usage in an unified way. It is confirmed that the proposed cell based GIS as CA has flexible usage of the attribute information that is attached to the cell in concert with location information and does work for disaster spreading simulation and prediction.

  14. ESI GIS Data and PDF Maps: Environmental Sensitivity Index including GIS Data and Maps (for the U.S. Shorelines, including Alaska, Hawaii, and Puerto Rico)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Environmental Sensitivity Index (ESI) maps are an integral component in oil-spill contingency planning and assessment. They serve as a source of information in the...

  15. Quantitative X-ray Map Analyser (Q-XRMA): A new GIS-based statistical approach to Mineral Image Analysis

    Science.gov (United States)

    Ortolano, Gaetano; Visalli, Roberto; Godard, Gaston; Cirrincione, Rosolino

    2018-06-01

    We present a new ArcGIS®-based tool developed in the Python programming language for calibrating EDS/WDS X-ray element maps, with the aim of acquiring quantitative information of petrological interest. The calibration procedure is based on a multiple linear regression technique that takes into account interdependence among elements and is constrained by the stoichiometry of minerals. The procedure requires an appropriate number of spot analyses for use as internal standards and provides several test indexes for a rapid check of calibration accuracy. The code is based on an earlier image-processing tool designed primarily for classifying minerals in X-ray element maps; the original Python code has now been enhanced to yield calibrated maps of mineral end-members or the chemical parameters of each classified mineral. The semi-automated procedure can be used to extract a dataset that is automatically stored within queryable tables. As a case study, the software was applied to an amphibolite-facies garnet-bearing micaschist. The calibrated images obtained for both anhydrous (i.e., garnet and plagioclase) and hydrous (i.e., biotite) phases show a good fit with corresponding electron microprobe analyses. This new GIS-based tool package can thus find useful application in petrology and materials science research. Moreover, the huge quantity of data extracted opens new opportunities for the development of a thin-section microchemical database that, using a GIS platform, can be linked with other major global geoscience databases.

  16. A morphometry map and a new method for honey bee morphometric analysis by using the ArcGIS

    Directory of Open Access Journals (Sweden)

    Hossam F. Abou-Shaara

    2013-12-01

    Full Text Available The morphometric analysis of honey bees has a substantial importance for honey bee subspecies characterization and discrimination while the ArcGIS is a geographical program for data analysis. In the present research, the combination between the morphometric data and the spatial analysis options of the ArcGIS was done and subsequently tested in creating a morphometry map for honey bees from some regions in Egypt as well as for the discrimination between two honey bee subspecies. Therefore, I present a model for creating the morphometry maps and a new method for the morphometric analysis by the transformation of the morphometric data to raster data layers. The obtained results showed that the created morphometry map classified the regions successfully according to the morphological character means. The morphometric analysis was successfully performed by using trend analysis and raster difference range. The analysis of the morphometric data as raster layers showed high sensitivity for the differences between subspecies and regions. The presented model and the method are effective and can be applied for the discrimination between subspecies, regions and colonies as well as can be used with other insects.

  17. A Review on Applications of Remote Sensing and Geographic Information Systems (GIS in Water Resources and Flood Risk Management

    Directory of Open Access Journals (Sweden)

    Xianwei Wang

    2018-05-01

    Full Text Available Water is one of the most critical natural resources that maintain the ecosystem and support people’s daily life. Pressures on water resources and disaster management are rising primarily due to the unequal spatial and temporal distribution of water resources and pollution, and also partially due to our poor knowledge about the distribution of water resources and poor management of their usage. Remote sensing provides critical data for mapping water resources, measuring hydrological fluxes, monitoring drought and flooding inundation, while geographic information systems (GIS provide the best tools for water resources, drought and flood risk management. This special issue presents the best practices, cutting-edge technologies and applications of remote sensing, GIS and hydrological models for water resource mapping, satellite rainfall measurements, runoff simulation, water body and flood inundation mapping, and risk management. The latest technologies applied include 3D surface model analysis and visualization of glaciers, unmanned aerial vehicle (UAV video image classification for turfgrass mapping and irrigation planning, ground penetration radar for soil moisture estimation, the Tropical Rainfall Measuring Mission (TRMM and the Global Precipitation Measurement (GPM satellite rainfall measurements, storm hyetography analysis, rainfall runoff and urban flooding simulation, and satellite radar and optical image classification for urban water bodies and flooding inundation. The application of those technologies is expected to greatly relieve the pressures on water resources and allow better mitigation of and adaptation to the disastrous impact of droughts and flooding.

  18. Flood Hazard Mapping by Using Geographic Information System and Hydraulic Model: Mert River, Samsun, Turkey

    Directory of Open Access Journals (Sweden)

    Vahdettin Demir

    2016-01-01

    Full Text Available In this study, flood hazard maps were prepared for the Mert River Basin, Samsun, Turkey, by using GIS and Hydrologic Engineering Centers River Analysis System (HEC-RAS. In this river basin, human life losses and a significant amount of property damages were experienced in 2012 flood. The preparation of flood risk maps employed in the study includes the following steps: (1 digitization of topographical data and preparation of digital elevation model using ArcGIS, (2 simulation of flood lows of different return periods using a hydraulic model (HEC-RAS, and (3 preparation of flood risk maps by integrating the results of (1 and (2.

  19. A Spatially Explicit Approach for Sensitivity and Uncertainty Analysis of GIS-Multicriteria Landslide Susceptibility Mapping. GI_Forum 2013 – Creating the GISociety|

    OpenAIRE

    Feizizadeh, Bakhtiar; Jankowski, Piotr; Blaschke, Thomas

    2016-01-01

    GIS multicriteria decision analysis (MCDA) methods are increasingly being used in landslide susceptibility mapping for the prediction of future hazards, decision making, as well as hazard mitigation plans. However, the uncertainties associated with MCDA techniques are inevitable and model outcomes are prone to multiple types of uncertainty. In this paper, the spatiality explicitly method is employed to assess the uncertainty associated with two methods of GIS-MCDA namely, Analytical Hierarchi...

  20. Design and realization of tourism spatial decision support system based on GIS

    Science.gov (United States)

    Ma, Zhangbao; Qi, Qingwen; Xu, Li

    2008-10-01

    In this paper, the existing problems of current tourism management information system are analyzed. GIS, tourism as well as spatial decision support system are introduced, and the application of geographic information system technology and spatial decision support system to tourism management and the establishment of tourism spatial decision support system based on GIS are proposed. System total structure, system hardware and software environment, database design and structure module design of this system are introduced. Finally, realization methods of this systemic core functions are elaborated.

  1. GeoNetGIS: a Geodetic Network Geographical Information System to manage GPS networks in seismic and volcanic areas

    Science.gov (United States)

    Cristofoletti, P.; Esposito, A.; Anzidei, M.

    2003-04-01

    This paper presents the methodologies and issues involved in the use of GIS techniques to manage geodetic information derived from networks in seismic and volcanic areas. Organization and manipulation of different geodetical, geological and seismic database, give us a new challenge in interpretation of information that has several dimensions, including spatial and temporal variations, also the flexibility and brand range of tools available in GeoNetGIS, make it an attractive platform for earthquake risk assessment. During the last decade the use of geodetic networks based on the Global Positioning System, devoted to geophysical applications, especially for crustal deformation monitoring in seismic and volcanic areas, increased dramatically. The large amount of data provided by these networks, combined with different and independent observations, such as epicentre distribution of recent and historical earthquakes, geological and structural data, photo interpretation of aerial and satellite images, can aid for the detection and parameterization of seismogenic sources. In particular we applied our geodetic oriented GIS to a new GPS network recently set up and surveyed in the Central Apennine region: the CA-GeoNet. GeoNetGIS is designed to analyze in three and four dimensions GPS sources and to improve crustal deformation analysis and interpretation related with tectonic structures and seismicity. It manages many database (DBMS) consisting of different classes, such as Geodesy, Topography, Seismicity, Geology, Geography and Raster Images, administrated according to Thematic Layers. GeoNetGIS represents a powerful research tool allowing to join the analysis of all data layers to integrate the different data base which aid for the identification of the activity of known faults or structures and suggesting the new evidences of active tectonics. A new approach to data integration given by GeoNetGIS capabilities, allow us to create and deliver a wide range of maps, digital

  2. GIS integration of the 1:75,000 Romanian topographic map series from the World War I

    Science.gov (United States)

    Timár, G.; Mugnier, C. J.

    2009-04-01

    During the WWI, the Kingdom of Romania developed a 1:75,000 topographic map series, covering not only the actual territory of the country (the former Danube Principalities and Dobrogea) but also Bessarabia (now the Republic of Moldova), which was under Russian rule. The map sheets were issued between 1914 and 1917. The whole map consists of two zones; Columns A-F are the western zone, while Columns G-Q are belonging to the eastern one. To integrate the scanned map sheets to a geographic information system (GIS), the parameters of the map projection and the geodetic datum should be defined as well as the sheet labelling system. The sheets have no grid lines indicated; most of them have latitude and longitude lines but some of them have no coordinate descriptions. The sheets, however, can be rectified using their four corners as virtual control points, and using the following grid and datum parameters: Eastern zone: • Projection type: Bonne. • Projection center: latitude=46d 30m; longitude=27d 20m 13.35s (from Greenwich). • Base ellipsoid: Bessel 1841 • Datum parameters (from local to WGS84): dX=+875 m; dY=-119 m; dZ=+313 m. • Sheet size: 40*40 kilometers, projection center is the NW corner of the 779 (Column L; Row VII) sheet. Western zone: • Projection type: Bonne. • Projection center: latitude=45d; longitude=26d 6m 41.18s (from Greenwich); • Base ellipsoid: Bessel 1841 • Datum parameters (from local to WGS84): dX=+793 m; dY=+364 m; dZ=+173 m. • Sheet size: 0.6*0.4 grad (new degrees), except Column F, which is wider to east to fill the territory to the zone boundary. In Columns E and F geographic coordinates are indicated in new degrees, with the prime meridian of Bucharest. Apart from the system of columns and rows, each sheet has its own label of three or four digit. The last two digit correspond to the column number (69 for Column A going up to 84 for Column Q) while the first digit(s) refer directly to row number (1-15). During the

  3. GIS-based seismic shaking slope vulnerability map of Sicily (Central Mediterranean)

    Science.gov (United States)

    Nigro, Fabrizio; Arisco, Giuseppe; Perricone, Marcella; Renda, Pietro; Favara, Rocco

    2010-05-01

    permanent displacement potentially induced by an seismic scenario. Such methodologies found on the consideration that the conditions of seismic stability and the post-seismic functionality of engineering structures are tightly related to the entity of the permanent deformations that an earthquake can induce. Regarding the existing simplified procedures among slope stability models, Newmark's model is often used to derive indications about slope instabilities due to earthquakes. In this way, we have evaluated the seismically-induced landslides hazard in Sicily (Central Mediterranean) using the Newmark-like model. In order to determine the map distribution of the seismic ground-acceleration from an earthquake scenario, the attenuation-law of Sabetta & Pugliese has been used, analyzing some seismic recordings occurred in Italy. Also, by evaluating permanent displacements, the correlation of Ambraseys & Menu has been assumed. The seismic shaking slope vulnerability map of Sicily has been carried out using GIS application, also considering max seismic ground-acceleration peak distribution (in terms of exceedance probability for fixed time), slope acclivity, cohesion/angle of internal friction of outcropping rocks, allowing the zoning of the unstable slopes under seismic forces.

  4. GIS, ENSURING ENVIRONMENTAL SAFETY STUDY PARAMETERS URBANIZED AREAS OF THE CENTRAL BLACK EARTH REGION

    Directory of Open Access Journals (Sweden)

    S. A. Eprintsev

    2014-01-01

    Full Text Available A model of geo-information for geo-environmental studies , including the formation and maintenance of the GIS database ( for periodic ecological and geochemical studies ; database processing ( statistical data processing , holding current calculations , creating kartoosnovy GIS (creating "layers" of a vector map ; geocoding data ( data transformation ecogeochemical research kartoosnovy vector coordinate system , GIS mapping ( thematic maps , data analysis , design (development of priority actions to optimize the urban environment .

  5. Mapping of risk prone areas of kala-azar (Visceral leishmaniasis) in parts of Bihar State, India: an RS and GIS approach.

    Science.gov (United States)

    Sudhakar, S; Srinivas, T; Palit, A; Kar, S K; Battacharya, S K

    2006-09-01

    The kala-azar fever (Visceral leishmaniasis) is continuing unabated in India for over a century, now being largely confined to the eastern part of India mainly in Bihar state and to some extent in its bordering states like West Bengal and Uttar Pradesh. Two study sites namely Patepur block in Vaishali district with high endemicity in northern part and Lohardagga block in Lohardagga district with absolute non-endemicity in southern part of Bihar were selected for the study with the following objectives : (i) to study the macro-ecosystem in relation to distribution of vector -Phlebotomus argentipes; (ii) to identify/map the risk prone areas or villages in a block for quick remedial measures; and (iii) to make use of satellite remote sensing and GIS to demonstrate the utility for rapid assessment of landuse/landcover and their relation with the incidence of kalaazar leading to the mapping of risk prone areas. Indian Remote Sensing (IRS)-1D LISS III satellite data for the periods of March and November 2000 were analysed in Silicon graphic image processing system using ERDAS software. False color composites (FCC) were generated and landuse/landcover was assessed using Maximum likelihood supervised classification techniques based on ground truth training sets. During the study the GIS functions are used to quantify the remotely sensed landscape proportions of 5 km2 buffer surrounding each known group of villages of high occurrence of sandflies in endemic and nonendemic study sites. Instead of traditional ground based survey methods to vector surveillance, the present study used a combination of remote sensing (RS) and geographical information system (GIS) approach to develop landscape predictors of sandfly abundance-an indicator of human vector contact and as a measure of risk prone areas. Statistical analysis using the remotely sensed landscape variables showed that rural villages surrounded by higher proportion of transitional swamps with soft stemmed edible plants and

  6. The Design and Implement of Tourism Information System Based on GIS

    Science.gov (United States)

    Chunchang, Fu; Nan, Zhang

    From the geographical information system concept, discusses the main contents of the geographic information system, and the current of the geographic information system key technological measures of tourism information system, the application of tourism information system for specific requirements and goals, and analyzes a relational database model based on the tourist information system in GIS application methods of realization.

  7. Analysis Of Educational Services Distribution-Based Geographic Information System GIS

    OpenAIRE

    Waleed Lagrab; Noura AKNIN

    2015-01-01

    Abstract This study analyzes the spatial distribution of kindergarten facilities in the study area based on the Geographic Information Systems GIS in order to test an efficiency of GIS technology to redistribute the existing kindergarten and choose the best location in the future and applying the standard criteria for selecting the suitable locations for kindergarten. To achieve this goal the data and information are collected via interviews and comprehensive statistics on the education facil...

  8. GIS (Geographic Information Systems) based calculation on hydrocarbon generated volume: Amazon Basin example; O uso de SIG no calculo de hidrocarbonetos gerados: exemplo da Bacia do Amazonas

    Energy Technology Data Exchange (ETDEWEB)

    Pedrinha, Saulo; Simoes, Leonardo; Goncalves, Felix T.T.; Carneiro, Jason T.G. [Petroleum Geoscience Technology Ltda. (PGT), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    The calculation of the volume of hydrocarbons generated from a particular source rock a sedimentary basin provides numerical data that help to better describe the petroleum system, and evaluate its potential. Among the various methodologies developed for calculating the volume of oil there is a proposal by Schmoker (1994), which has the advantage to take into account the occurrence of the source rock area in the basin, and the spatial variations in the main geological parameters. Using the tools of a GIS, through the manipulation of georeferred maps, it is possible to calculate the volume of oil generated in a way that would be virtually impossible by using punctual data, only. Even the discretiation maps in minors areas allows, via attribute table in the GIS, the application of a Monte Carlo simulation, which allows to incorporate all the uncertainties related to the input data in the calculation, obtaining distributions of volumes associated with various parts of the final map being integrated throughout the basin. Isopac and maturation maps (Gonzaga et al., 2000), along with TOC data from Barreirinha formation, Amazon Basin, have been scanned and georeferred and, once in the GIS database, were treated in order to spatially distribute the geological properties of the source rock. Then, such maps were handled in accordance with Schmoker (1994) method, leading to a map of mass and distribution of oil generated in the basin at the regional scale. (author)

  9. The CPD Maps System

    Data.gov (United States)

    Department of Housing and Urban Development — CPD Maps includes data on the locations of existing CDBG, HOME, public housing and other HUD-funded community assets, so that users can view past investments...

  10. Software Framework for Development of Web-GIS Systems for Analysis of Georeferenced Geophysical Data

    Science.gov (United States)

    Okladnikov, I.; Gordov, E. P.; Titov, A. G.

    2011-12-01

    Georeferenced datasets (meteorological databases, modeling and reanalysis results, remote sensing products, etc.) are currently actively used in numerous applications including modeling, interpretation and forecast of climatic and ecosystem changes for various spatial and temporal scales. Due to inherent heterogeneity of environmental datasets as well as their size which might constitute up to tens terabytes for a single dataset at present studies in the area of climate and environmental change require a special software support. A dedicated software framework for rapid development of providing such support information-computational systems based on Web-GIS technologies has been created. The software framework consists of 3 basic parts: computational kernel developed using ITTVIS Interactive Data Language (IDL), a set of PHP-controllers run within specialized web portal, and JavaScript class library for development of typical components of web mapping application graphical user interface (GUI) based on AJAX technology. Computational kernel comprise of number of modules for datasets access, mathematical and statistical data analysis and visualization of results. Specialized web-portal consists of web-server Apache, complying OGC standards Geoserver software which is used as a base for presenting cartographical information over the Web, and a set of PHP-controllers implementing web-mapping application logic and governing computational kernel. JavaScript library aiming at graphical user interface development is based on GeoExt library combining ExtJS Framework and OpenLayers software. Based on the software framework an information-computational system for complex analysis of large georeferenced data archives was developed. Structured environmental datasets available for processing now include two editions of NCEP/NCAR Reanalysis, JMA/CRIEPI JRA-25 Reanalysis, ECMWF ERA-40 Reanalysis, ECMWF ERA Interim Reanalysis, MRI/JMA APHRODITE's Water Resources Project Reanalysis

  11. Geographical Information System (GIS) for Relationship Between Dengue Disease and Climatic Factors at Cheras, Malaysia

    International Nuclear Information System (INIS)

    Ahmad Dasuki Mustafa; Azman Azid; Hafizan Juahir; Kamaruzzaman Yunus; Ismail Zainal Abidin; Nur Hishaam Sulaiman; Mohammad Azizi Amran; Mohamad Romizan Osman; Mohd Khairul Amri Kamarudin; Muhammad Barzani Gasim; Mohd Khairul Amri Kamarudin

    2015-01-01

    The Geographical Information System (GIS) was utilized to generate dengue distribution cases and its correlation to the climatic factors in Cheras, Kuala Lumpur, Malaysia. The data were provided by Dewan Bandaraya Kuala Lumpur (DBKL). The data was integrated with Kuala Lumpur map to graphically present information about the areas which been hit by the dengue outbreak through a graphic display. The analysis using focused on overlay, buffer creating, and query builder. The statistical analysis such as linear regression is undertaken to show the correlation between dengue diseases with the climatic factors that is rainfall, temperature and relative humidity for the year 2008, 2009, 2010, and 2011. The study found that there is no correlation between disease incidence and total rainfall (R"2=0.057). Thus, it can be concluded that the climatic factors were not contributed to the dengue cases. Through this research, highly expect that the dengue distribution map had been developed and can be used by the authorities to analyzing the dengue disease pattern by related with the climatic factors. (author)

  12. BGS Radon Protective Measures GIS

    International Nuclear Information System (INIS)

    Appleton, D.; Adlam, K.

    2000-01-01

    The British Geological Survey Radon Protective Measures Geographical Information System is described. The following issues are highlighted: Identification of development sites where radon protection is required in new dwellings; Mapping radon potential on the basis of house radon and geology; Radon Protective Measures GIS; Radon site reports; and Follow-up radon protective measures sire reports

  13. Assessing Accessibility and Transport Infrastructure Inequities in Administrative Units in Serbia’s Danube Corridor Based on Multi-Criteria Analysis and Gis Mapping Tools

    Directory of Open Access Journals (Sweden)

    Ana VULEVIC

    2018-02-01

    Full Text Available The Danube Regions, especially the sub-national units of governance, must be ready to play an active role in spatial development policies. A precondition for this is good accessibility and the coordinated development of all transport systems in the Danube corridor. The main contribution of this paper is to provide a multi-criteria model for potential decision making related to the evaluation of transportation accessibility in Serbia’s Danube Corridor. Geographic Information Systems (GIS, based on maps, indicate the existing counties’ transport infrastructures inequities (between well-connected and isolated counties in terms of accessibility to central places. Through the research, relevant indicators have been identifi ed. This provides an outline of transportation perspectives regarding the development achieved and also fosters the increase of transportation accessibility in some peripheral Serbian Danube administrative units – counties (Nomenclature of Territorial Units for Statistics level 3 – NUTS 3.

  14. Coastal salt pans: strengthening the new emerging role of Maltese shore platforms for geo-tourism with GIS Mapping

    Science.gov (United States)

    Gauci, Ritienne; Schembri, John A.; Mizzi, Raphael; Inkpen, Rob

    2015-04-01

    Salt has been a foremost natural resource for millennia with a wide range of uses from preserving edible foods, and cooking with it, to cleaning, laundry, hygiene, and as a medicinal balm. The Mediterranean, with its long indented coastline, numerous islands and a distinctive climate has been a favourable area for salt production from sea water. It was the source of supply of salt to the Eurasian land mass, and trekking it through to sub-Saharan Africa. With a salinity of around 36 ppt, the Mediterranean is one of the most productive areas in the globe for salt yield per volume of water. In small islands with poor natural resources, the production of salt from sea water, through insolation, aeolian processes and intense human endeavour, offered economic benefits and created a socio-environmental cultural heritage around the sites of production of this staple resource. The Maltese Islands are no exception to this activity with rectangular or oblong pans etched on the softer surface limestone of Malta and Gozo. Located strategically on the foreshore, the rectangular (0.5-1.5 m2), shallow pits (ca 15cm), supplemented by larger reservoirs occupy significant areas as near to the shoreline as possible. There are about 40 artisanal sites along the littoral varying in area from one thousand to 17,000 m2and with their nearest point located between one and ten metres from the water's edge. Some are no longer in use. Their total area around the islands is about 170,000 m2. This aim of this paper is to explore the multiple geographies of still existing salt pans in selected sites on Malta. This research aims to map out the traditional but complex management system present at each selected shore platform site, some of which are considered the best preserved salt pans on the Islands. Consequently, they transform into focal touristic attractions, especially during the summer months when a daily display of soil harvesting work can be witnessed and admired. The mapping and

  15. Cowichan Valley energy mapping and modelling. Report 1 - GIS mapping of potential renewable energy resources in the CVRD. Final report. [Vancouver Island, Canada

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-06-15

    The driving force behind the Integrated Energy Mapping and Analysis project was the identification and analysis of a suite of pathways that the Cowichan Valley Regional District (CVRD) can utilise to increase its energy resilience, as well as reduce energy consumption and GHG emissions, with a primary focus on the residential sector. Mapping and analysis undertaken will support provincial energy and GHG reduction targets, and the suite of pathways outlined will address a CVRD internal target that calls for 75% of the region's energy within the residential sector to come from locally sourced renewables by 2050. The target has been developed as a mechanism to meet resilience and climate action target. The maps and findings produced are to be integrated as part of a regional policy framework currently under development. The first task in the project was the production of a series of thematic GIS maps and associated databases of potential renewable energy resources in the CVRD. The renewable energy sources mapped were solar, wind, micro hydro, and biomass (residues and waste). Other sources were also discussed (e.g. geothermal heat) but not mapped due to lack of spatially explicit input data. The task 1 findings are detailed in this report. (LN)

  16. Application of GIS in Beach Placer Exploration

    International Nuclear Information System (INIS)

    Babu, M.N.

    2016-01-01

    Application of Geographic Information System (GIS) in beach placer exploration combines the activities of data collection, organisation, visualisation, query, analysis and prediction. GIS has the potential to enhance the capability for creative data analysis, modelling and interpretation. Exploration software and GIS are essential tools for geoscientists searching for mineral deposits. GIS technology has come a long way in the past fifteen years, especially in data handling, analysis, visualization etc. Modern technology and solutions are now evolving to allow geoscientists to share data easily between mapping platforms and enterprise level GIS environments. In beach placer exploration programme, data handling and processing are the main challenging tasks due to generation and processing of large volume of field and laboratory data of the areas under investigation. Though there are limitations in visualising map data as a single map on a screen, due to its non-proportionate lengths and widths, a GIS can very well handle all these varied datasets to demarcate highly potential zones within a narrow coastal strip. Generally these datasets contain information from thousands of drillholes about their location co-ordinates, depth, height, description and thickness of lithounits, water table level, radioactivity and other pertinent subsurface properties. Field data collection can be efficiently done using a hand held global positioning system (GPS) installed with mobile-GIS application and data handling software

  17. A method of groundwater quality assessment based on fuzzy network-CANFIS and geographic information system (GIS)

    Science.gov (United States)

    Gholami, V.; Khaleghi, M. R.; Sebghati, M.

    2017-11-01

    The process of water quality testing is money/time-consuming, quite important and difficult stage for routine measurements. Therefore, use of models has become commonplace in simulating water quality. In this study, the coactive neuro-fuzzy inference system (CANFIS) was used to simulate groundwater quality. Further, geographic information system (GIS) was used as the pre-processor and post-processor tool to demonstrate spatial variation of groundwater quality. All important factors were quantified and groundwater quality index (GWQI) was developed. The proposed model was trained and validated by taking a case study of Mazandaran Plain located in northern part of Iran. The factors affecting groundwater quality were the input variables for the simulation, whereas GWQI index was the output. The developed model was validated to simulate groundwater quality. Network validation was performed via comparison between the estimated and actual GWQI values. In GIS, the study area was separated to raster format in the pixel dimensions of 1 km and also by incorporation of input data layers of the Fuzzy Network-CANFIS model; the geo-referenced layers of the effective factors in groundwater quality were earned. Therefore, numeric values of each pixel with geographical coordinates were entered to the Fuzzy Network-CANFIS model and thus simulation of groundwater quality was accessed in the study area. Finally, the simulated GWQI indices using the Fuzzy Network-CANFIS model were entered into GIS, and hence groundwater quality map (raster layer) based on the results of the network simulation was earned. The study's results confirm the high efficiency of incorporation of neuro-fuzzy techniques and GIS. It is also worth noting that the general quality of the groundwater in the most studied plain is fairly low.

  18. Applications of geographic information systems (GIS) data and methods in obesity-related research.

    Science.gov (United States)

    Jia, P; Cheng, X; Xue, H; Wang, Y

    2017-04-01

    Geographic information systems (GIS) data/methods offer good promise for public health programs including obesity-related research. This study systematically examined their applications and identified gaps and limitations in current obesity-related research. A systematic search of PubMed for studies published before 20 May 2016, utilizing synonyms for GIS in combination with synonyms for obesity as search terms, identified 121 studies that met our inclusion criteria. We found primary applications of GIS data/methods in obesity-related research included (i) visualization of spatial distribution of obesity and obesity-related phenomena, and basic obesogenic environmental features, and (ii) construction of advanced obesogenic environmental indicators. We found high spatial heterogeneity in obesity prevalence/risk and obesogenic environmental factors. Also, study design and characteristics varied considerably across studies because of lack of established guidance and protocols in the field, which may also have contributed to the mixed findings about environmental impacts on obesity. Existing findings regarding built environment are more robust than those regarding food environment. Applications of GIS data/methods in obesity research are still limited, and related research faces many challenges. More and better GIS data and more friendly analysis methods are needed to expand future GIS applications in obesity-related research. © 2017 World Obesity Federation.

  19. Using Geographic Information System - GIS - for pipeline management: case of Urucu-Coari LPG pipeline

    Energy Technology Data Exchange (ETDEWEB)

    Furquim, Maysa P.O. [ESTEIO Engenharia e Aerolevantamentos S.A, Curitiba, PR (Brazil)

    2009-07-01

    This technical paper seeks to demonstrate the stages run during the GIS - Geographic Information System accomplishment as for the follow-up of a pipeline work. The GLPDUTO (LPG Pipeline) Urucu-Coari work shall be the focus of this paper. The main challenges in the compilation of data generated in the work site will be presented, as well the importance for the definition of which data should be relevant, so that the construction company and PETROBRAS could follow up its evolution. The GIS development has been performed since January 2007 and should be finished by the first semester of 2009. The following stages for GIS definition for the work management will be presented: brief history of the project - project conception, purpose, structure implemented and accomplishment expectations; survey data in loco - raw data obtained directly during the carrying out of the work and generated in the project and implantation stage; treated data - data resulting from raw data, but already treated as for the GIS environment; routines developed - specific tools created for the consolidation of the data to be manipulated on GIS in an optimized and functional way; result presented - GIS in its final conception, developed and input with the routines and data regarding the project. (author)

  20. A comparative assessment of prediction capabilities of modified analytical hierarchy process (M-AHP and Mamdani fuzzy logic models using Netcad-GIS for forest fire susceptibility mapping

    Directory of Open Access Journals (Sweden)

    Hamid reza Pourghasemi

    2016-03-01

    Full Text Available The main purpose of this study is to assess forest fire susceptibility maps (FFSMs and their performances comparison using modified analytical hierarchy process (M-AHP and Mamdani fuzzy logic (MFL models in a geographic information system (GIS environment. This study was carried out in the Minudasht Forests, Golestan Province, Iran, and was conducted in three main stages such as spatial data construction, forest fire modelling using M-AHP and MFL, and validation of constructed models using receiver operating characteristic (ROC curve. At first, seven conditioning factors, such as altitude, slope aspect, slope angle, annual temperature, wind effect, land use, and normalized different vegetation index, were extracted from the spatial database. In the next step, FFSMs were prepared using M-AHP and MFL modules in a Netcad-GIS Architect environment. Finally, the ROC curves and area under the curves (AUCs were estimated for validation purposes. The results showed that the AUCs for MFL and M-AHP are 88.20% and 77.72%, respectively. The results obtained in this study also showed that the MFL model performed better than the M-AHP model. These FFSMs can be applied for land use planning, management, and prevention of future fire hazards.

  1. Mapping of spatial and temporal variations of' water quality in an industrial area: a remote sensing and GIS approach

    International Nuclear Information System (INIS)

    Lakshmi, T.V.; Reddy, M.A.; Anjaneyulu, Y.

    2005-01-01

    This paper illustrate the impact of industrialization on water quality in and around Nakkavagu Watershed, due to unplanted industrial development. The study area falls between 78 deg. 05' - 78 deg. 25'E. longitude and 17 deg. 25'-17 deg. 45'N latitude, the catchment area extends 734 sq. km in Medak district, Andhra Predesh, India. The study area lies in the Godavari Basin. Remote sensing and GIS techniques are used to map the spatial and temporal distribution of water quality with respect to land use / land cover (Lu /Lc) changes for a period of three decades. Spatial database consisting of drainage network and geomorphology and land use / land cover change detection maps (1970-2004) have been generated for the entire watershed using remote sensing satellite data. Attribute database consisting of (water quality analysis is carried out and corresponding water quality index is calculated on a five point scale: 0- 25 Excellent, 26 -50 Good, 51 -75 Poor, 76 -100 Very poor, and> 100 Unfit for Drinking. Integrated study to establish the impact of Lu / Lc on water quality is carried out using GIS Analysis. Maps showing Lu / Lc changes and corresponding spatial distribution of water quality index were generated for the years 1979, 1989,2004. The results indicate that the water quality index in the entire Nakkavagu watershed during 1979 is excellent and good and by 2004, the entire watershed is rated in to poor, very poor and unfit for drinking. Best environmental management plans were suggested for restoration of the Nakkavagu watershed. (author)

  2. CoC GIS Tools (GIS Tool)

    Data.gov (United States)

    Department of Housing and Urban Development — This tool provides a no-cost downloadable software tool that allows users to interact with professional quality GIS maps. Users access pre-compiled projects through...

  3. Study of Earthquake Disaster Prediction System of Langfang city Based on GIS

    Science.gov (United States)

    Huang, Meng; Zhang, Dian; Li, Pan; Zhang, YunHui; Zhang, RuoFei

    2017-07-01

    In this paper, according to the status of China’s need to improve the ability of earthquake disaster prevention, this paper puts forward the implementation plan of earthquake disaster prediction system of Langfang city based on GIS. Based on the GIS spatial database, coordinate transformation technology, GIS spatial analysis technology and PHP development technology, the seismic damage factor algorithm is used to predict the damage of the city under different intensity earthquake disaster conditions. The earthquake disaster prediction system of Langfang city is based on the B / S system architecture. Degree and spatial distribution and two-dimensional visualization display, comprehensive query analysis and efficient auxiliary decision-making function to determine the weak earthquake in the city and rapid warning. The system has realized the transformation of the city’s earthquake disaster reduction work from static planning to dynamic management, and improved the city’s earthquake and disaster prevention capability.

  4. Security attack detection algorithm for electric power gis system based on mobile application

    Science.gov (United States)

    Zhou, Chao; Feng, Renjun; Wang, Liming; Huang, Wei; Guo, Yajuan

    2017-05-01

    Electric power GIS is one of the key information technologies to satisfy the power grid construction in China, and widely used in power grid construction planning, weather, and power distribution management. The introduction of electric power GIS based on mobile applications is an effective extension of the geographic information system that has been widely used in the electric power industry. It provides reliable, cheap and sustainable power service for the country. The accurate state estimation is the important conditions to maintain the normal operation of the electric power GIS. Recent research has shown that attackers can inject the complex false data into the power system. The injection attack of this new type of false data (load integrity attack LIA) can successfully bypass the routine detection to achieve the purpose of attack, so that the control center will make a series of wrong decision. Eventually, leading to uneven distribution of power in the grid. In order to ensure the safety of the electric power GIS system based on mobile application, it is very important to analyze the attack mechanism and propose a new type of attack, and to study the corresponding detection method and prevention strategy in the environment of electric power GIS system based on mobile application.

  5. When Informationists Get Involved: the CHICA-GIS Project.

    Science.gov (United States)

    Whipple, Elizabeth C; Odell, Jere D; Ralston, Rick K; Liu, Gilbert C

    2013-01-01

    Child Health Improvement through Computer Automation (CHICA) is a computer decision support system (CDSS) that interfaces with existing electronic medical record systems (EMRS) and delivers "just-in-time" patient-relevant guidelines to physicians during the clinical encounter and accurately captures structured data from all who interact with the system. "Delivering Geospatial Intelligence to Health Care Professionals (CHICA-GIS)" (1R01LM010923-01) expands the medical application of Geographic Information Systems (GIS) by integrating a geographic information system with CHICA. To provide knowledge management support for CHICA-GIS, three informationists at the Indiana University School of Medicine were awarded a supplement from the National Library Medicine. The informationists will enhance CHICA-GIS by: improving the accuracy and accessibility of information, managing and mapping the knowledge which undergirds the CHICA-GIS decision support tool, supporting community engagement and consumer health information outreach, and facilitating the dissemination of new CHICA-GIS research results and services.

  6. Use of remote sensing and GIS in mapping the environmental sensitivity areas for desertification of Egyptian territory

    Science.gov (United States)

    Gad, A.; Lotfy, I.

    2008-06-01

    Desertification is defined in the first art of the convention to combat desertification as "land degradation in arid, semiarid and dry sub-humid areas resulting from climatic variations and human activities". Its consequence include a set of important processes which are active in arid and semi arid environment, where water is the main limiting factor of land use performance in such ecosystem . Desertification indicators or the groups of associated indicators should be focused on a single process. They should be based on available reliable information sources, including remotely sensed images, topographic data (maps or DEM'S), climate, soils and geological data. The current work aims to map the Environmental Sensitivity Areas (ESA's) to desertification in whole territory of Egypt at a scale of 1:1 000 000. ETM satellite images, geologic and soil maps were used as main sources for calculating the index of Environmental Sensitivity Areas (ESAI) for desertification. The algorism is adopted from MEDALLUS methodology as follows; ESAI = (SQI * CQI * VQI)1/3 Where SQI is the soil quality index, CQI is the climate quality index and VQI is the vegetation quality index. The SQI is based on rating the parent material, slope, soil texture, and soil depth. The VQI is computed on bases of rating three categories (i.e. erosion protection, drought resistance and plant cover). The CQI is based on the aridity index, derived from values of annual rainfall and potential evapotranspiration. Arc-GIS 9 software was used for the computation and sensitivity maps production. The results show that the soil of the Nile Valley are characterized by a moderate SQI, however the those in the interference zone are low soil quality indexed. The dense vegetation of the valley has raised its VQI to be good, however coastal areas are average and interference zones are low. The maps of ESA's for desertification show that 86.1% of Egyptian territory is classified as very sensitive areas, while 4.3% as

  7. Study of arcview GIS application in the nuclear power plant emergency response decision support system

    International Nuclear Information System (INIS)

    Li Peng; Chen Lin; Dong Binjiang

    2003-01-01

    It is very significant to apply the technique of GIS to the development of the Nuclear Power Plant Emergency Response Decision Support System. On the basis of the software system ArcView. This paper investigate the framework, the function and the development methods of the system. (authors)

  8. Disseminating near-real-time hazards information and flood maps in the Philippines through Web-GIS.

    Science.gov (United States)

    A Lagmay, Alfredo Mahar Francisco; Racoma, Bernard Alan; Aracan, Ken Adrian; Alconis-Ayco, Jenalyn; Saddi, Ivan Lester

    2017-09-01

    The Philippines being a locus of tropical cyclones, tsunamis, earthquakes and volcanic eruptions, is a hotbed of disasters. These natural hazards inflict loss of lives and costly damage to property. Situated in a region where climate and geophysical tempest is common, the Philippines will inevitably suffer from calamities similar to those experienced recently. With continued development and population growth in hazard prone areas, it is expected that damage to infrastructure and human losses would persist and even rise unless appropriate measures are immediately implemented by government. In 2012, the Philippines launched a responsive program for disaster prevention and mitigation called the Nationwide Operational Assessment of Hazards (Project NOAH), specifically for government warning agencies to be able to provide a 6hr lead-time warning to vulnerable communities against impending floods and to use advanced technology to enhance current geo-hazard vulnerability maps. To disseminate such critical information to as wide an audience as possible, a Web-GIS using mashups of freely available source codes and application program interface (APIs) was developed and can be found in the URLs http://noah.dost.gov.ph and http://noah.up.edu.ph/. This Web-GIS tool is now heavily used by local government units in the Philippines in their disaster prevention and mitigation efforts and can be replicated in countries that have a proactive approach to address the impacts of natural hazards but lack sufficient funds. Copyright © 2017. Published by Elsevier B.V.

  9. Low Cost Vision Based Personal Mobile Mapping System

    Directory of Open Access Journals (Sweden)

    M. M. Amami

    2014-03-01

    Full Text Available Mobile mapping systems (MMS can be used for several purposes, such as transportation, highway infrastructure mapping and GIS data collecting. However, the acceptance of these systems is not wide spread and their use is still limited due the high cost and dependency on the Global Navigation Satellite System (GNSS. A low cost vision based personal MMS has been produced with an aim to overcome these limitations. The system has been designed to depend mainly on cameras and use of low cost GNSS and inertial sensors to provide a bundle adjustment solution with initial values. The system has the potential to be used indoor and outdoor. The system has been tested indoors and outdoors with different GPS coverage, surrounded features, and narrow and curvy paths. Tests show that the system is able to work in such environments providing 3D coordinates of better than 10 cm accuracy.

  10. Low Cost Vision Based Personal Mobile Mapping System

    Science.gov (United States)

    Amami, M. M.; Smith, M. J.; Kokkas, N.

    2014-03-01

    Mobile mapping systems (MMS) can be used for several purposes, such as transportation, highway infrastructure mapping and GIS data collecting. However, the acceptance of these systems is not wide spread and their use is still limited due the high cost and dependency on the Global Navigation Satellite System (GNSS). A low cost vision based personal MMS has been produced with an aim to overcome these limitations. The system has been designed to depend mainly on cameras and use of low cost GNSS and inertial sensors to provide a bundle adjustment solution with initial values. The system has the potential to be used indoor and outdoor. The system has been tested indoors and outdoors with different GPS coverage, surrounded features, and narrow and curvy paths. Tests show that the system is able to work in such environments providing 3D coordinates of better than 10 cm accuracy.

  11. Development of a GIS-based failure investigation system for highway soil slopes

    Science.gov (United States)

    Ramanathan, Raghav; Aydilek, Ahmet H.; Tanyu, Burak F.

    2015-06-01

    A framework for preparation of an early warning system was developed for Maryland, using a GIS database and a collective overlay of maps that highlight highway slopes susceptible to soil slides or slope failures in advance through spatial and statistical analysis. Data for existing soil slope failures was collected from geotechnical reports and field visits. A total of 48 slope failures were recorded and analyzed. Six factors, including event precipitation, geological formation, land cover, slope history, slope angle, and elevation were considered to affect highway soil slope stability. The observed trends indicate that precipitation and poor surface or subsurface drainage conditions are principal factors causing slope failures. 96% of the failed slopes have an open drainage section. A majority of the failed slopes lie in regions with relatively high event precipitation ( P>200 mm). 90% of the existing failures are surficial erosion type failures, and only 1 out of the 42 slope failures is deep rotational type failure. More than half of the analyzed slope failures have occurred in regions having low density land cover. 46% of failures are on slopes with slope angles between 20° and 30°. Influx of more data relating to failed slopes should give rise to more trends, and thus the developed slope management system will aid the state highway engineers in prudential budget allocation and prioritizing different remediation projects based on the literature reviewed on the principles, concepts, techniques, and methodology for slope instability evaluation (Leshchinsky et al., 2015).

  12. The application of VR-GIS to decommissioning decision support system (DDSS) of nuclear reactor

    International Nuclear Information System (INIS)

    Zhu Bo

    2005-01-01

    Advanced management technique and Decision Support System (DSS) are needed to solve the problems of the nuclear reactor decommissioning decision-making. In this study, a kind of new DSS technique for nuclear reactor decommissioning is introduced. It is based on the Virtual Reality (VR) and Geography Information System (GIS), which combine with the scientific management method, operational research, cybernetics and behavior science. The proposed DDSS (Decommissioning Decision Support System) can provide decision-maker the real time 3-D virtual Environment, GIS information and background material of the decommissioning reactor, help to ascertain the decision-making target, modify the decision module and optimize the dismantling plan. The data from three modules (VR Environment Module, VR-DOSE Management Module and Route Layout GIS Module) are used to continuously update and show the statistic at the same time, and the final advice will be given to decision-maker. (authors)

  13. China Dimensions Data Collection: Fundamental GIS: Digital Chart of China, 1:1M, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — Fundamental GIS: Digital Chart of China, 1:1M, Version 1 consists of vector maps of China and surrounding areas. The maps include roads, railroads, drainage systems,...

  14. An interactive economic GIS tool for Europe using map objects for Java

    Science.gov (United States)

    Srinivasan, Vaishnavi

    Europe is one of the world's seven continents, which has approximately 50 countries and all are rich in culture, traditions, economy, biodiversity, among other things. This thesis focuses on creating a GIS application about Europe which will give an overview of Europe in various aspects. It covers 50 countries including financial centers, currency used, population, GDP growth, private banks, central banks, stock exchange, coat of arms and flags for each country, using the HotLink Tool. A reference link is also provided for detailed understanding of the above mentioned aspects. The other part of the thesis mainly focuses on the economics of the European Union as well as each country independently, which gives a thorough knowledge about the current investment climate in Europe. A part of this idea is to ensure transparency after the financial crisis in 2008. Further the capital markets of the European Union and other European countries are brought to light to provide a clear picture of their present financial situation. The application can help in improving policy and decision making, foreign investments, business environment for various development organizations. So this GIS application will be an effective tool for customers to understand the risks in investments by learning about the economic conditions of Europe.

  15. Hydrogeology, Pesticide DRASTIC for the Intermediate Aquifer. Pesticide DRASTIC coverage for the Intermediate Aquifer System. Drastic maps are most useful as a generalized tool to assess regional potential aquifer vulnerability., Published in 1998, 1:24000 (1in=2000ft) scale, Florida Department of Environmental Protection (FDEP).

    Data.gov (United States)

    NSGIC State | GIS Inventory — Hydrogeology dataset current as of 1998. Pesticide DRASTIC for the Intermediate Aquifer. Pesticide DRASTIC coverage for the Intermediate Aquifer System. Drastic maps...

  16. Geologic characterization of shelf areas using usSEABED for GIS mapping, modeling processes and assessing marine sand and gravel resources

    Science.gov (United States)

    Williams, S.J.; Bliss, J.D.; Arsenault, M.A.; Jenkins, C.J.; Goff, J.A.

    2007-01-01

    Geologic maps depicting offshore sedimentary features serve many scientific and applied purposes. Such maps have been lacking, but recent computer technology and software offer promise in the capture and display of diverse marine data. Continental margins contain landforms which provide a variety of important functions and contain important sedimentary records. Some shelf areas also contain deposits regarded as potential aggregate resources. Because proper management of coastal and offshore areas is increasingly important, knowledge of the framework geology and marine processes is critical. Especially valuable are comprehensive and integrated digital databases based on high-quality information from original sources. Products of interest are GIS maps containing thematic information, such as sediment character and texture. These products are useful to scientists modeling nearshore and shelf processes as well as planners and managers. The U.S. Geological Survey is leading a national program to gather a variety of extant marine geologic data into the usSEABED database system. This provides centralized, integrated marine geologic data collected over the past 50 years. To date, over 340,000 sediment data points from the U.S. reside in usSEABED, which combines an array of physical data and analytical and descriptive information about the sea floor and are available to the marine community through three USGS data reports for the Atlantic, Gulf of Mexico, and Pacific published in 2006, and the project web sites: (http://woodshole.er.usg s.gov/project-pages/aggregates/ and http://walrus.wr.usgs.gov/usseabed/)

  17. Fault specific GIS based seismic hazard maps for the Attica region, Greece

    Science.gov (United States)

    Deligiannakis, G.; Papanikolaou, I. D.; Roberts, G.

    2018-04-01

    Traditional seismic hazard assessment methods are based on the historical seismic records for the calculation of an annual probability of exceedance for a particular ground motion level. A new fault-specific seismic hazard assessment method is presented, in order to address problems related to the incompleteness and the inhomogeneity of the historical records and to obtain higher spatial resolution of hazard. This method is applied to the region of Attica, which is the most densely populated area in Greece, as nearly half of the country's population lives in Athens and its surrounding suburbs, in the Greater Athens area. The methodology is based on a database of 24 active faults that could cause damage to Attica in case of seismic rupture. This database provides information about the faults slip rates, lengths and expected magnitudes. The final output of the method is four fault-specific seismic hazard maps, showing the recurrence of expected intensities for each locality. These maps offer a high spatial resolution, as they consider the surface geology. Despite the fact that almost half of the Attica region lies on the lowest seismic risk zone according to the official seismic hazard zonation of Greece, different localities have repeatedly experienced strong ground motions during the last 15 kyrs. Moreover, the maximum recurrence for each intensity occurs in different localities across Attica. Highest recurrence for intensity VII (151-156 times over 15 kyrs, or up to a 96 year return period) is observed in the central part of the Athens basin. The maximum intensity VIII recurrence (115 times over 15 kyrs, or up to a 130 year return period) is observed in the western part of Attica, while the maximum intensity IX (73-77/15 kyrs, or a 195 year return period) and X (25-29/15 kyrs, or a 517 year return period) recurrences are observed near the South Alkyonides fault system, which dominates the strong ground motions hazard in the western part of the Attica mainland.

  18. Implementation of a Geographical Information System. GIS, in the Natural National Park, Cliffs of Cali

    International Nuclear Information System (INIS)

    Zapata Pardo, Maria Victoria; Martinez Zarate, Camilo; Gonzalez, Carlos A

    1999-01-01

    The objective of this project was to generate a tool to improve the handling, conservation and administration of the Park National Natural - Cliffs of Cali, belonging to the Special Administrative Unit of the System of Natural National Parks, UAESPNN, of the Ministry of the Environment. With this purpose it was implemented a System of Geographical Information, GIS, like methodological model. The GIS; Cliffs of Cali used a database relational, developed with the software ACCESS t m, compatible with the used GIS Arc/INFO t m and Arc/View t m (for work station). The data space accessed to the database were those of topography, hydrology, areas of life, geology, limit, fronts, to zone with handling ends, precipitation, indigenous occupation and municipalities; it contain related alphanumeric information, administrative, socioeconomic handling and physique among others

  19. GIS-based landslide susceptibility mapping models applied to natural and urban planning in Trikala, Central Greece

    Energy Technology Data Exchange (ETDEWEB)

    Bathrellos, G. D.; Kalivas, D. P.; Skilodimou, H. D.

    2009-07-01

    Landslide susceptibility mapping is a practical tool in natural and urban planning; it can be applied for determining land use zones, in construction design and planning of a variety of projects. In this study, two different GIS based landslide susceptibility maps were generated in the mountainous part of the Trikala Prefecture in Thessaly, Central Greece. This was accomplished by using different methods for correlating factors, which have an effect on landslide occurrences. The instability factors taken into account were: lithology, tectonic features, slope gradients, road network, drainage network, land use and rainfall. A frequency distribution of the half number of the landslide events of the study area in each class of the instability factors was performed in order to rate the classes. Two models have been used to combine the instability factors and assess the overall landslide susceptibility, namely: the Weight Factor Model (WeF), which is a statistical method, and the Multiple Factor Model (MuF) that is a logical method. The produced maps were classified into four zones: Low, Moderate, High and Very High susceptible zones and validated using the other half number of the landslide events of the area. Evaluation of the results is optimized through a Landslide Models Indicator (La.M.I.). (Author) 36 refs.

  20. Geotechnical maps development through the use of geo-technologies to implement and monitor pipelines in a GIS environment

    Energy Technology Data Exchange (ETDEWEB)

    Figueira, Ernesto Goldfarb [ESTEIO Engenharia e Aerolevantamentos S.A, Curitiba, PR (Brazil); Figueira, Isabella Francoso Rebutini; Bongiolo, Alessandra de Barros e Silva [Universidade Federal do Parana (UFPR), Cutritiba, PR (Brazil)

    2009-07-01

    The variations of the geologic characteristics of the subsurface materials can have direct impact in the pipeline projects. The elaboration of a geotechnical zoning have intention to reduce, among others, these uncertainties and consequently to minimize costs of implantation and maintenance. The present paper intends to present the experiences obtained through the elaboration of a geotechnical zoning as well as a panorama of the tools and currently available methods. The pipes studied, object of this work, are situated in Rio de Janeiro state, between Cabiunas and Duque de Caxias cities, with an extension upper 200 km, crossing lands with very different characteristics, from fluvial marine lowlands, constituted of quaternary sediments to mountain regions, formed of metamorphic and igneous rocks. The database used in an GIS environment include satellite images, three-dimensional models of the land, digital air photographs, laser airborne for generation of digital elevation models DEM, geologic, geomorphologic, pedological maps and land surveys. The integration of these different levels of information, also with the digital 3D photo interpretation with the geomorphologic contacts, beyond maps of declivity generated from xyz data, resulted in geotechnical maps, scale 1:10.000, with the order of 750 meters borders for each side of the pipeline direction. (author)

  1. Using digital databases to create geologic maps for the 21st century : a GIS model for geologic, environmental, cultural and transportation data from southern Rhode Island

    Science.gov (United States)

    2002-05-01

    Knowledge of surface and subsurface geology is fundamental to the planning and development of new or modified transportation systems. Toward this : end, we have compiled a model GIS database consisting of important geologic, cartographic, environment...

  2. ESTIMAP: A GIS-BASED MODEL TO MAP ECOSYSTEM SERVICES IN THE EUROPEAN UNION

    Directory of Open Access Journals (Sweden)

    G. Zulian

    2014-04-01

    Full Text Available Policies of the European Union which affect the use or protection of natural resources increasingly need spatial data on the supply, the flow and the demand of ecosystem services. The model ESTIMAP was developed to this purpose. ESTIMAP departs from land cover and land use maps to which it adds other spatial information with the objective to map various ecosystem services. This study introduces the ESTIMAP map as tool to support the mapping and modelling of ecosystem services at European scale. Examples are provided for three regulating ecosystem services, air quality regulation, coastal protection, and pollination and one cultural ecosystem services, recreation. 

  3. GIS and radiological crisis management

    International Nuclear Information System (INIS)

    Kacenelen, Y.

    2009-01-01

    The author reports a new operational exercise performed on September 17, 2009 on the CEA Saclay site. For this purpose, the CEA (the French Atomic Energy Commission) developed M2IRAGE, a tool based on ArcGIS 9.3 technologies. This tool allows an easier data collection and exploitation in order to quickly map the distribution of radioactive particles and thus help the management of the health response and emergency organization within two hours after the warning. This tool notably uses a geographic information system (GIS)

  4. Assessment of groundwater quality using geographical information system (GIS), at north-east Cairo, Egypt.

    Science.gov (United States)

    El-Shahat, M F; Sadek, M A; Mostafa, W M; Hagagg, K H

    2016-04-01

    The present investigation has been conducted to delineate the hydrogeochemical and environmental factors that control the water quality of the groundwater resources in the north-east of Cairo. A complementary approach based on hydrogeochemistry and a geographical information system (GIS) based protectability index has been employed for conducting this work. The results from the chemical analysis revealed that the groundwater of the Quaternary aquifer is less saline than that of the Miocene aquifer and the main factors that control the groundwater salinity in the studied area are primarily related to the genesis of the original recharging water modified after by leaching, dissolution, cation exchange, and fertilizer leachate. The computed groundwater quality index (WQI) falls into two categories: fair for almost all the Miocene groundwater samples, while the Quaternary groundwater samples are all have a good quality. The retarded flow and non-replenishment of the Miocene aquifer compared to the renewable active recharge of the Quaternary aquifer can explain this variation of WQI. The index and overlay approach exemplified by the DUPIT index has been used to investigate the protectability of the study aquifers against diffuse pollutants. Three categories (highly protectable less vulnerable, moderately protectable moderately vulnerable and less protectable highly vulnerable) have been determined and areally mapped.

  5. Using geographic information systems (GIS) to identify communities in need of health insurance outreach: An OCHIN practice-based research network (PBRN) report.

    Science.gov (United States)

    Angier, Heather; Likumahuwa, Sonja; Finnegan, Sean; Vakarcs, Trisha; Nelson, Christine; Bazemore, Andrew; Carrozza, Mark; DeVoe, Jennifer E

    2014-01-01

    Our practice-based research network (PBRN) is conducting an outreach intervention to increase health insurance coverage for patients seen in the network. To assist with outreach site selection, we sought an understandable way to use electronic health record (EHR) data to locate uninsured patients. Health insurance information was displayed within a web-based mapping platform to demonstrate the feasibility of using geographic information systems (GIS) to visualize EHR data. This study used EHR data from 52 clinics in the OCHIN PBRN. We included cross-sectional coverage data for patients aged 0 to 64 years with at least 1 visit to a study clinic during 2011 (n = 228,284). Our PBRN was successful in using GIS to identify intervention sites. Through use of the maps, we found geographic variation in insurance rates of patients seeking care in OCHIN PBRN clinics. Insurance rates also varied by age: The percentage of adults without insurance ranged from 13.2% to 86.8%; rates of children lacking insurance ranged from 1.1% to 71.7%. GIS also showed some areas of households with median incomes that had low insurance rates. EHR data can be imported into a web-based GIS mapping tool to visualize patient information. Using EHR data, we were able to observe smaller areas than could be seen using only publicly available data. Using this information, we identified appropriate OCHIN PBRN clinics for dissemination of an EHR-based insurance outreach intervention. GIS could also be used by clinics to visualize other patient-level characteristics to target clinic outreach efforts or interventions. © Copyright 2014 by the American Board of Family Medicine.

  6. A method of mapping sinkhole susceptibility using a geographic information system : a case study for interstates in the karst counties of Virginia.

    Science.gov (United States)

    2015-02-01

    This study proposes the use of a geographic information system (GIS) to create a susceptibility map, pinpointing : regions in the karst counties of Virginia, in particular, along interstates, most susceptible to future sinkhole : development, determi...

  7. Verification of a GIS-based system for identification of potential hydro power plant sites in Uganda

    OpenAIRE

    Gimbo, Florence

    2015-01-01

    Hydropower makes and is expected to continue to make a significant contribution to meeting the electricity demand in many countries. The information on hydropower potential is many places is often incomplete. A GIS based tool is under development is expected to help in quickly identifying possible hydropower plant locations over a large area in a short time. This study is aimed at evaluating how well this GIS tool is able to estimate the hydropower potential from the runoff maps and terrain/e...

  8. ArcNLET: A GIS-based software to simulate groundwater nitrate load from septic systems to surface water bodies

    Science.gov (United States)

    Rios, J. Fernando; Ye, Ming; Wang, Liying; Lee, Paul Z.; Davis, Hal; Hicks, Rick

    2013-03-01

    Onsite wastewater treatment systems (OWTS), or septic systems, can be a significant source of nitrates in groundwater and surface water. The adverse effects that nitrates have on human and environmental health have given rise to the need to estimate the actual or potential level of nitrate contamination. With the goal of reducing data collection and preparation costs, and decreasing the time required to produce an estimate compared to complex nitrate modeling tools, we developed the ArcGIS-based Nitrate Load Estimation Toolkit (ArcNLET) software. Leveraging the power of geographic information systems (GIS), ArcNLET is an easy-to-use software capable of simulating nitrate transport in groundwater and estimating long-term nitrate loads from groundwater to surface water bodies. Data requirements are reduced by using simplified models of groundwater flow and nitrate transport which consider nitrate attenuation mechanisms (subsurface dispersion and denitrification) as well as spatial variability in the hydraulic parameters and septic tank distribution. ArcNLET provides a spatial distribution of nitrate plumes from multiple septic systems and a load estimate to water bodies. ArcNLET's conceptual model is divided into three sub-models: a groundwater flow model, a nitrate transport and fate model, and a load estimation model which are implemented as an extension to ArcGIS. The groundwater flow model uses a map of topography in order to generate a steady-state approximation of the water table. In a validation study, this approximation was found to correlate well with a water table produced by a calibrated numerical model although it was found that the degree to which the water table resembles the topography can vary greatly across the modeling domain. The transport model uses a semi-analytical solution to estimate the distribution of nitrate within groundwater, which is then used to estimate a nitrate load using a mass balance argument. The estimates given by ArcNLET are

  9. Using Geographic Information Systems (GIS) to assess the role of the built environment in influencing obesity: a glossary.

    Science.gov (United States)

    Thornton, Lukar E; Pearce, Jamie R; Kavanagh, Anne M

    2011-07-01

    Features of the built environment are increasingly being recognised as potentially important determinants of obesity. This has come about, in part, because of advances in methodological tools such as Geographic Information Systems (GIS). GIS has made the procurement of data related to the built environment easier and given researchers the flexibility to create a new generation of environmental exposure measures such as the travel time to the nearest supermarket or calculations of the amount of neighbourhood greenspace. Given the rapid advances in the availability of GIS data and the relative ease of use of GIS software, a glossary on the use of GIS to assess the built environment is timely. As a case study, we draw on aspects the food and physical activity environments as they might apply to obesity, to define key GIS terms related to data collection, concepts, and the measurement of environmental features.

  10. Development of a GIS-Based Decision Support System for Diagnosis of River System Health and Restoration

    Directory of Open Access Journals (Sweden)

    Jihong Xia

    2014-10-01

    Full Text Available The development of a decision support system (DSS to inform policy making has been progressing rapidly. This paper presents a generic framework and the development steps of a decision tool prototype of geographic information systems (GIS-based decision support system of river health diagnosis (RHD-DSS. This system integrates data, calculation models, and human knowledge of river health status assessment, causal factors diagnosis, and restoration decision making to assist decision makers during river restoration and management in Zhejiang Province, China. Our RHD-DSS is composed of four main elements: the graphical user interface (GUI, the database, the model base, and the knowledge base. It has five functional components: the input module, the database management, the diagnostic indicators management, the assessment and diagnosis, and the visual result module. The system design is illustrated with particular emphasis on the development of the database, model schemas, diagnosis and analytical processing techniques, and map management design. Finally, the application of the prototype RHD-DSS is presented and implemented for Xinjiangtang River of Haining County in Zhejiang Province, China. This case study is used to demonstrate the advantages gained by the application of this system. We conclude that there is great potential for using the RHD-DSS to systematically manage river basins in order to effectively mitigate environmental issues. The proposed approach will provide river managers and designers with improved insight into river degradation conditions, thereby strengthening the assessment process and the administration of human activities in river management.

  11. Web GIS in practice VII: stereoscopic 3-D solutions for online maps and virtual globes

    Science.gov (United States)

    Boulos, Maged N.K.; Robinson, Larry R.

    2009-01-01

    Because our pupils are about 6.5 cm apart, each eye views a scene from a different angle and sends a unique image to the visual cortex, which then merges the images from both eyes into a single picture. The slight difference between the right and left images allows the brain to properly perceive the 'third dimension' or depth in a scene (stereopsis). However, when a person views a conventional 2-D (two-dimensional) image representation of a 3-D (three-dimensional) scene on a conventional computer screen, each eye receives essentially the same information. Depth in such cases can only be approximately inferred from visual clues in the image, such as perspective, as only one image is offered to both eyes. The goal of stereoscopic 3-D displays is to project a slightly different image into each eye to achieve a much truer and realistic perception of depth, of different scene planes, and of object relief. This paper presents a brief review of a number of stereoscopic 3-D hardware and software solutions for creating and displaying online maps and virtual globes (such as Google Earth) in "true 3D", with costs ranging from almost free to multi-thousand pounds sterling. A practical account is also given of the experience of the USGS BRD UMESC (United States Geological Survey's Biological Resources Division, Upper Midwest Environmental Sciences Center) in setting up a low-cost, full-colour stereoscopic 3-D system.

  12. Emerging role of Geographical Information System (GIS), Life Cycle Assessment (LCA) and spatial LCA (GIS-LCA) in sustainable bioenergy planning.

    Science.gov (United States)

    Hiloidhari, Moonmoon; Baruah, D C; Singh, Anoop; Kataki, Sampriti; Medhi, Kristina; Kumari, Shilpi; Ramachandra, T V; Jenkins, B M; Thakur, Indu Shekhar

    2017-10-01

    Sustainability of a bioenergy project depends on precise assessment of biomass resource, planning of cost-effective logistics and evaluation of possible environmental implications. In this context, this paper reviews the role and applications of geo-spatial tool such as Geographical Information System (GIS) for precise agro-residue resource assessment, biomass logistic and power plant design. Further, application of Life Cycle Assessment (LCA) in understanding the potential impact of agro-residue bioenergy generation on different ecosystem services has also been reviewed and limitations associated with LCA variability and uncertainty were discussed. Usefulness of integration of GIS into LCA (i.e. spatial LCA) to overcome the limitations of conventional LCA and to produce a holistic evaluation of the environmental benefits and concerns of bioenergy is also reviewed. Application of GIS, LCA and spatial LCA can help alleviate the challenges faced by ambitious bioenergy projects by addressing both economics and environmental goals. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Development and clinical application of respiration gated irradiation system (ReGIS) in heavy ion radiotherapy

    International Nuclear Information System (INIS)

    Osaka, Yasuhiro; Tsujii, Hirohiko; Mizoe, Jun-etsu

    1999-01-01

    In order to achieve maximal radiation dose concentration for thoraco-abdominal tumors and spare normal surrounding tissue in heavy ion therapy, compensation for respiration-related movement is desirable. Hence, a respiration-gated irradiation system (ReGIS) was introduced to the Heavy Ion Medical Accelerator in Chiba (HIMAC) in June 1996. In this report, the development and clinical application of ReGIS, as well as the analysis of respiration-related movement and reduction of target volumes are described. When using ReGIS, a sensor emitting infrared rays is attached to the thoracic or abdominal wall to measure respiratory movement. A position-sensitive device (camera) senses these rays to detect sensor locations and data are forwarded to a computer system. A curve representing respiratory cycles is displayed, upon which a trigger level that is part of a respiratory cycle (about a fourth or fifth of the expiratory phase). Beams can be delivered while the respiratory curve is under the trigger level. Thirty-five patients involving 37 irradiated sites (19 lung cancers, 13 hepatomas, 2 mediastinal tumors, and 3 metastatic lung tumors) were retrospectively analyzed. Target volumes were reduced an average of 29.5% (11.0 to 57.9%) using ReGIS. Average tumor respiration-related movement in gated phase was 3.7 mm (0 mm to 14.6 mm). Although irradiation using ReGIS took more time to perform (average 1.62 times non-gated irradiation), it was considered to be acceptable for routine heavy ion therapy. ReGIS has proved to be useful for compensation of respiration-related movement and reduction of target volume in radiotherapy, and this method is sufficiently simple for practical clinical application. (author)

  14. Holonomic systems for period mappings

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Jingyue, E-mail: jychen@brandeis.edu [Department of Mathematics, Brandeis University, Waltham, MA 02454 (United States); Huang, An, E-mail: anhuang@math.harvard.edu [Department of Mathematics, Harvard University, Cambridge, MA 02138 (United States); Lian, Bong H., E-mail: lian@brandeis.edu [Department of Mathematics, Brandeis University, Waltham, MA 02454 (United States)

    2015-09-15

    Period mappings were introduced in the sixties [4] to study variation of complex structures of families of algebraic varieties. The theory of tautological systems was introduced recently [7,8] to understand period integrals of algebraic manifolds. In this paper, we give an explicit construction of a tautological system for each component of a period mapping. We also show that the D-module associated with the tautological system gives rise to many interesting vanishing conditions for period integrals at certain special points of the parameter space.

  15. MULTIFUNCTIONAL ANO MULTIMEDIA GIS SYSTEM FOR THE INVENTORY ANO THE MANAGEMENT OF THE WETLANOS OF PUGLIA REGION (SOUTHERN ITALY

    Directory of Open Access Journals (Sweden)

    F. BRUNO

    2004-01-01

    Full Text Available The Puglia region is characterised by an homogeneous calcareous basement, affected by karst processes. so as to have a noticeable water reservoir. lts wetlands are the result of the complex interaction or geo-hydrological. climatic and biogeographical factors. The conservation of these remnant wetlands is menaced by human activity: land reclamation, pumping of water table, loading of pollutants, tourism and poaching. In order to conserve these habitats a two phases project was carried out. In the first phase the wetlands were identified and mapped in a GIS system. In this way 36 wetlands were mapped. These areas were grouped into the following categories: ponds and marshes (15. artificial basins and saltpans (6. meanders (5, lakes (3, swamps (3,estuaries (2. lagoon (I. gulf (I. A description has been hot linked to each area: physical and biological characteristics, previous land uses, environmental perturbations; level of protection; restoration activities to be undertaken. In the second phase three sample areas were chosen to develop a method for their characterisation. The areas are: l-Torre Guaceto, a brackish marsh bounded by sand-banks, 2-Frattarolo swamp, a salt swamp characterised by grasslands mainly composed by halophytes. 3-Lago Salso, an artificial al basin created for agricultural and hunting purposes, characterised by a mosaic of vegetation, mainly composed of hydrophytes and hygrophilous species, and of sheets of water, which represent an idoneous nesting and roosting area for many bird species, A spatio-temporal GIS database was developed using 19 digital orthophotos in order to analyse the changes that have occurred in the last fifthy years. Then the efficiency of a quantitative evaluation index was verified, This index was calculated using a GIS extension named Wetlands Rapid Assessment Procedure (WRAP. This procedure is based on the ranking of the ecological factors chosen for the evaluation: wildlife. vegetation, buffer area

  16. Mapping one strong 'Ohana: using network analysis and GIS to enhance the effectiveness of a statewide coalition to prevent child abuse and neglect.

    Science.gov (United States)

    Cardazone, Gina; U Sy, Angela; Chik, Ivan; Corlew, Laura Kate

    2014-06-01

    Network analysis and GIS enable the presentation of meaningful data about organizational relationships and community characteristics, respectively. Together, these tools can provide a concrete representation of the ecological context in which coalitions operate, and may help coalitions identify opportunities for growth and enhanced effectiveness. This study uses network analysis and GIS mapping as part of an evaluation of the One Strong 'Ohana (OSO) campaign. The OSO campaign was launched in 2012 via a partnership between the Hawai'i Children's Trust Fund (HCTF) and the Joyful Heart Foundation. The OSO campaign uses a collaborative approach aimed at increasing public awareness of child maltreatment and protective factors that can prevent maltreatment, as well as enhancing the effectiveness of the HCTF Coalition. This study focuses on three elements of the OSO campaign evaluation: (1) Network analysis exploring the relationships between 24 active Coalition member organizations, (2) GIS mapping of responses to a randomized statewide phone survey (n = 1,450) assessing awareness of factors contributing to child maltreatment, and (3) Combined GIS maps and network data, illustrating opportunities for geographically-targeted coalition building and public awareness activities.

  17. Sensuous and Reflexive GIS: exploring visualisation and VRML

    Directory of Open Access Journals (Sweden)

    Mark Gillings

    1996-09-01

    Full Text Available Over the last five years, landscape-based archaeological research has been transformed as the widespread introduction of Geographical Information Systems (GIS has begun to revolutionise the way we, as archaeologists, manage and manipulate spatial information. As GIS-based applications begin to reach maturity and the role of GIS as a flexible mechanism for the articulation, exploration and analysis of landscape data becomes more fully realised, GIS is increasingly being seen as much as a place to think as a simple data management and mapping tool.

  18. Nielsen PrimeLocation Web/Desktop: Assessing and GIS Mapping Market Area

    Data.gov (United States)

    Social Security Administration — Nielsen PrimeLocation Web and Desktop Software Licensed for Internal Use only: Pop-Facts Demographics Database, Geographic Mapping Data Layers, Geo-Coding locations.

  19. A Web GIS Enabled Comprehensive Hydrologic Information System for Indian Water Resources Systems

    Science.gov (United States)

    Goyal, A.; Tyagi, H.; Gosain, A. K.; Khosa, R.

    2017-12-01

    Hydrological systems across the globe are getting increasingly water stressed with each passing season due to climate variability & snowballing water demand. Hence, to safeguard food, livelihood & economic security, it becomes imperative to employ scientific studies for holistic management of indispensable resource like water. However, hydrological study of any scale & purpose is heavily reliant on various spatio-temporal datasets which are not only difficult to discover/access but are also tough to use & manage. Besides, owing to diversity of water sector agencies & dearth of standard operating procedures, seamless information exchange is challenging for collaborators. Extensive research is being done worldwide to address these issues but regrettably not much has been done in developing countries like India. Therefore, the current study endeavours to develop a Hydrological Information System framework in a Web-GIS environment for empowering Indian water resources systems. The study attempts to harmonize the standards for metadata, terminology, symbology, versioning & archiving for effective generation, processing, dissemination & mining of data required for hydrological studies. Furthermore, modelers with humble computing resources at their disposal, can consume this standardized data in high performance simulation modelling using cloud computing within the developed Web-GIS framework. They can also integrate the inputs-outputs of different numerical models available on the platform and integrate their results for comprehensive analysis of the chosen hydrological system. Thus, the developed portal is an all-in-one framework that can facilitate decision makers, industry professionals & researchers in efficient water management.

  20. An Assessment of the Use of Geographical Information Systems (GIS) in Teaching Geography in Singapore Schools

    Science.gov (United States)

    Yap, Lee Yong; Tan, Geok Chin Ivy; Zhu, Xuan; Wettasinghe, Marissa C.

    2008-01-01

    In 1998, geographical information systems (GIS) were introduced to secondary schools in Singapore as a tool for teaching geography at the secondary and junior college levels. However, general observations and feedback from school teachers suggested that only a small number of secondary schools and junior colleges in Singapore were actually using…

  1. A GIS-BASED ENVIRONMENTAL HEALTH INFORMATION SOURCE FOR MALAYSIAN CONTEXT

    OpenAIRE

    Lau Tiu Chung; Lau Bee Theng; Henry Lee Seldon

    2013-01-01

    In this paper, we propose a GIS-based system for collection and targeted distribution of latest alerts and real-time environmental factors to the Malaysian population. We call it the Environmental Health Management System (EHMS). This GIS-based system is designed to facilitate and encourage research into environmental health quality issues by providing a comprehensive tracking and monitoring tool. This GIS-based system is embedded with Google Maps API and Geocoding API services to visualize t...

  2. Spatiotemporal floodplain mapping and prediction using HEC-RAS - GIS tools: Case of the Mejerda river, Tunisia

    Science.gov (United States)

    Ben Khalfallah, C.; Saidi, S.

    2018-06-01

    The floods have become a scourge in recent years (Floods of, 2003, 2006, 2009, 2011, and 2012), increasingly frequent and devastating. Tunisia does not escape flooding problems, the flood management requires basically a better knowledge of the phenomenon (flood), and the use of predictive methods. In order to limit this risk, we became interested in hydrodynamics modeling of Medjerda basin. To reach this aim, rainfall distribution is studied and mapped using GIS tools. In addition, flood and return period estimation of rainfall are calculated using Hyfran. Also, Simulations of recent floods are calculated and mapped using HEC-RAS and HEC-GeoRAS for the most recent flood occurred in February-March 2015 in Medjerda basin. The analysis of the results shows a good correlation between simulated parameters and those measured. There is a flood of the river exceeding 240 m3/s (DGRE, 2015) and more flowing sections are observed in the future simulations; for return periods of 10yr, 20yr and 50yr.

  3. GIS-based pollution hazard mapping and assessment framework of shallow lakes: southeastern Pampean lakes (Argentina) as a case study.

    Science.gov (United States)

    Romanelli, A; Esquius, K S; Massone, H E; Escalante, A H

    2013-08-01

    The assessment of water vulnerability and pollution hazard traditionally places particular emphasis on the study on groundwaters more than on surface waters. Consequently, a GIS-based Lake Pollution Hazard Index (LPHI) was proposed for assessing and mapping the potential pollution hazard for shallow lakes due to the interaction between the Potential Pollutant Load and the Lake Vulnerability. It includes easily measurable and commonly used parameters: land cover, terrain slope and direction, and soil media. Three shallow lake ecosystems of the southeastern Pampa Plain (Argentina) were chosen to test the usefulness and applicability of this suggested index. Moreover, anthropogenic and natural medium influence on biophysical parameters in these three ecosystems was examined. The evaluation of the LPHI map shows for La Brava and Los Padres lakes the highest pollution hazard (≈30 % with high to very high category) while Nahuel Rucá Lake seems to be the less hazardous water body (just 9.33 % with high LPHI). The increase in LPHI value is attributed to a different loading of pollutants governed by land cover category and/or the exposure to high slopes and influence of slope direction. Dissolved oxygen and biochemical oxygen demand values indicate a moderately polluted and eutrophized condition of shallow lake waters, mainly related to moderate agricultural activities and/or cattle production. Obtained information by means of LPHI calculation result useful to perform a local diagnosis of the potential pollution hazard to a freshwater ecosystem in order to implement basic guidelines to improve lake sustainability.

  4. Development of web-GIS system for analysis of georeferenced geophysical data

    Science.gov (United States)

    Okladnikov, I.; Gordov, E. P.; Titov, A. G.; Bogomolov, V. Y.; Genina, E.; Martynova, Y.; Shulgina, T. M.

    2012-12-01

    Georeferenced datasets (meteorological databases, modeling and reanalysis results, remote sensing products, etc.) are currently actively used in numerous applications including modeling, interpretation and forecast of climatic and ecosystem changes for various spatial and temporal scales. Due to inherent heterogeneity of environmental datasets as well as their huge size which might constitute up to tens terabytes for a single dataset at present studies in the area of climate and environmental change require a special software support. A dedicated web-GIS information-computational system for analysis of georeferenced climatological and meteorological data has been created. The information-computational system consists of 4 basic parts: computational kernel developed using GNU Data Language (GDL), a set of PHP-controllers run within specialized web-portal, JavaScript class libraries for development of typical components of web mapping application graphical user interface (GUI) based on AJAX technology, and an archive of geophysical datasets. Computational kernel comprises of a number of dedicated modules for querying and extraction of data, mathematical and statistical data analysis, visualization, and preparing output files in geoTIFF and netCDF format containing processing results. Specialized web-portal consists of a web-server Apache, complying OGC standards Geoserver software which is used as a base for presenting cartographical information over the Web, and a set of PHP-controllers implementing web-mapping application logic and governing computational kernel. JavaScript libraries aiming at graphical user interface development are based on GeoExt library combining ExtJS Framework and OpenLayers software. The archive of geophysical data consists of a number of structured environmental datasets represented by data files in netCDF, HDF, GRIB, ESRI Shapefile formats. For processing by the system are available: two editions of NCEP/NCAR Reanalysis, JMA/CRIEPI JRA-25

  5. Characterization of Hybrid Systems for Rural Electrification with Renewable Energies Using Geographic Information Systems (GIS)

    Energy Technology Data Exchange (ETDEWEB)

    Borda Angel, J. P.; Dominguez, J.; Amador, J.; Arribas, L.; Pinedo Pascua, I.

    2011-07-01

    The objective of this project is to redefine the algorithm of wind-diesel hybrid system implemented in IntiGIS. This methodology was developed by CIEMAT for the evaluation of rural electrification projects, comparing different renewable and conventional technologies based on their LEC or equivalent electrification cost. The analysis considers the social and geographical particularities of the study area. The core of the new model is the definition of renewable fraction in the wind-diesel hybrid system. To this end, it was assumed that the fraction of renewable will depend, first of all, of the wind speed. In this case, the objectives were to find a relationship between the renewable fraction and wind speed, expressed as a function, and also trying to demonstrate the influence of other parameters such as fuel price and consumption. The methodology used to achieve these objectives was to use HOMER to simulate technology and size of system components in order to obtain the optimal fraction renewable scenarios. Next, we examined how it varied with wind speed; we assessed the influence of other parameters and, finally, it is represented as a function of wind speed. After the redefinition of the algorithm, the changes were planned for inclusion in IntiGIS and tests were performed to validate the new model. (Author)

  6. Determination of distribution pattern of the heavy metal concentrations in the potable network of Gachsaran by Geographical Information System (GIS

    Directory of Open Access Journals (Sweden)

    G Paraham

    2013-12-01

    . Methods: In this descriptive, cross-sectional study, samples were taken from11 spots of the drinking water distribution network and tested for concentration of 10 metals by Inductivity Coupled Ions Plasma (ICP method in summer of 2010. The research data were compared with national and international water standards. Then the distribution map of heavy metals concentrations in the drinking water wells of the region was prepared by using the Geographical Information System (GIS software. Data were analyzed by the Kruskal-Wallis tests. Results: In all samples, the average concentration of heavy metals were: Arsenic 0.54, Cadmium 0.05, Zinc 55.9, Lead 0.18, Copper .82, Chromium 1.6, Barium 36.5, Selenium0.5, Mercury 0.1 and Silver 0.05 micrograms per liter and was less than the water quality standard. Conclusion: Based on the results obtained, it can be concluded that concentrations of heavy metals in Gachsaran’s drinking water distribution network are not higher than national and international standards and therefore not harmful for people. Key words: Heavy metals, Distribution network, Gachsaran, geographical information system (GIS

  7. Landslide Susceptibility Mapping Using GIS-based Vector Grid File (VGF Validating with InSAR Techniques: Three Gorges, Yangtze River (China

    Directory of Open Access Journals (Sweden)

    Cem Kıncal

    2017-04-01

    Full Text Available A landslide susceptibility assessment for the Three Gorges (TG region (China was performed in a Geographical Information System (GIS environment and Persistent Scatterer (PS InSAR derived displacements were used for validation purposes. Badong County of TG was chosen as case study field. Landslide parameters were derived from two datasets. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER Global Digital Elevation Map (GDEM was used to calculate slope geometry parameters (slope, aspect, drainage, and lineament, while geology and vegetation cover were obtained from Landsat and ASTER data. The majority of historical landslides occurred in the sandstone-shale-claystone intercalations. It appears that slope gradients are more critical than other parameters such as aspect and drainage. The susceptibility assessment was based on a summation of assigned susceptibility scores (points for each 30×30 m unit in a database of a Vector Grid File (VGF composed of ‘vector pixels’. A landslide susceptibility map (LSM was generated using VGF and classified with low, moderate and high landslide susceptibility zones. The comparison between the LSM and PS InSAR derived displacements suggests that landslides only account for parts of the observed surface movements.

  8. Remote sensing and GIS for land use/cover mapping and integrated land management: case from the middle Ganga plain

    Science.gov (United States)

    Singh, R. B.; Kumar, Dilip

    2012-06-01

    In India, land resources have reached a critical stage due to the rapidly growing population. This challenge requires an integrated approach toward harnessing land resources, while taking into account the vulnerable environmental conditions. Remote sensing and Geographical Information System (GIS) based technologies may be applied to an area in order to generate a sustainable development plan that is optimally suited to the terrain and to the productive potential of the local resources. The present study area is a part of the middle Ganga plain, known as Son-Karamnasa interfluve, in India. Alternative land use systems and the integration of livestock enterprises with the agricultural system have been suggested for land resources management. The objective of this paper is to prepare a land resource development plan in order to increase the productivity of land for sustainable development. The present study will contribute necessary input for policy makers to improve the socio-economic and environmental conditions of the region.

  9. Efficient data exchange: Integrating a vector GIS with an object-oriented, 3-D visualization system

    International Nuclear Information System (INIS)

    Kuiper, J.; Ayers, A.; Johnson, R.; Tolbert-Smith, M.

    1996-01-01

    A common problem encountered in Geographic Information System (GIS) modeling is the exchange of data between different software packages to best utilize the unique features of each package. This paper describes a project to integrate two systems through efficient data exchange. The first is a widely used GIS based on a relational data model. This system has a broad set of data input, processing, and output capabilities, but lacks three-dimensional (3-D) visualization and certain modeling functions. The second system is a specialized object-oriented package designed for 3-D visualization and modeling. Although this second system is useful for subsurface modeling and hazardous waste site characterization, it does not provide many of the, capabilities of a complete GIS. The system-integration project resulted in an easy-to-use program to transfer information between the systems, making many of the more complex conversion issues transparent to the user. The strengths of both systems are accessible, allowing the scientist more time to focus on analysis. This paper details the capabilities of the two systems, explains the technical issues associated with data exchange and how they were solved, and outlines an example analysis project that used the integrated systems

  10. Mosquito larval habitat mapping using remote sensing and GIS: Implications of coalbed methane development and West Nile virus

    Energy Technology Data Exchange (ETDEWEB)

    Zou, L.; Miller, S.N.; Schmidtmann, E.T. [University of Wyoming, Laramie, WY (United States). Dept. of Renewable Resources

    2006-09-15

    Potential larval habitats of the mosquito Culex tarsalis (Coquillett), implicated as a primary vector of West Nile virus in Wyoming, were identified using integrated remote sensing and geographic information system (GIS) analyses. The study area is in the Powder River Basin of north central Wyoming, an area that has been undergoing a significant increase in coalbed methane gas extractions since the late 1990s. Large volumes of water are discharged, impounded, and released during the extraction of methane gas, creating aquatic habitats that have the potential to support immature mosquito development. Landsat TM and ETM + data were initially classified into spectrally distinct water and vegetation classes, which were in turn used to identify suitable larval habitat sites. This initial habitat classification was refined using knowledge-based GIS techniques requiring spatial data layers for topography, streams, and soils to reduce the potential for overestimation of habitat. Accuracy assessment was carried out using field data and high-resolution aerial photography commensurate with one of the Landsat images. The classifier can identify likely habitat for ponds larger than 0.8 ha (2 acres) with generally satisfactory results (72.1%) with a lower detection limit of approximate to 0.4 ha (1 acre). Results show a 75% increase in potential larval habitats from 1999 to 2004 in the study area, primarily because of the large increase in small coalbed methane water discharge ponds. These results may facilitate mosquito abatement programs in the Powder River Basin with the potential for application throughout the state and region.

  11. Sistem Pengantaran Makanan dengan Pendayagunaan Vehicle Menggunakan Geographical Information System (GIS) dan Algoritma A Star (A*)

    OpenAIRE

    Lubis, Elita Sari

    2016-01-01

    Food delivery system is one various of geographical information systems (GIS) that can be applied through digitation process. The main case in food delivery service is the way to acquire shortest path and movement tracking of food delivery vehicle. Therefore, to accomplish the efficient food delivery system digitation process, it is needed to add facility of shortest path determination and food delivery vehicle tracking. This research uses A* shortest path algorithm to determine shortest path...

  12. A study on spatial decision support systems for HIV/AIDS prevention based on COM GIS technology

    Science.gov (United States)

    Yang, Kun; Luo, Huasong; Peng, Shungyun; Xu, Quanli

    2007-06-01

    Based on the deeply analysis of the current status and the existing problems of GIS technology applications in Epidemiology, this paper has proposed the method and process for establishing the spatial decision support systems of AIDS epidemic prevention by integrating the COM GIS, Spatial Database, GPS, Remote Sensing, and Communication technologies, as well as ASP and ActiveX software development technologies. One of the most important issues for constructing the spatial decision support systems of AIDS epidemic prevention is how to integrate the AIDS spreading models with GIS. The capabilities of GIS applications in the AIDS epidemic prevention have been described here in this paper firstly. Then some mature epidemic spreading models have also been discussed for extracting the computation parameters. Furthermore, a technical schema has been proposed for integrating the AIDS spreading models with GIS and relevant geospatial technologies, in which the GIS and model running platforms share a common spatial database and the computing results can be spatially visualized on Desktop or Web GIS clients. Finally, a complete solution for establishing the decision support systems of AIDS epidemic prevention has been offered in this paper based on the model integrating methods and ESRI COM GIS software packages. The general decision support systems are composed of data acquisition sub-systems, network communication sub-systems, model integrating sub-systems, AIDS epidemic information spatial database sub-systems, AIDS epidemic information querying and statistical analysis sub-systems, AIDS epidemic dynamic surveillance sub-systems, AIDS epidemic information spatial analysis and decision support sub-systems, as well as AIDS epidemic information publishing sub-systems based on Web GIS.

  13. Using Geographical Information Systems (GIS) as an instrument of water resource management: a case study from a GIS-based Water Safety Plan in Germany.

    Science.gov (United States)

    Wienand, I; Nolting, U; Kistemann, T

    2009-01-01

    Following international developments and the new WHO Drinking Water Guidelines (WHO 2004) a process-orientated concept for risk, monitoring and incident management has been developed and implemented in this study. The concept will be reviewed with special consideration for resource protection (first barrier of the multi-barrier system) and in turn, for the Water Safety Plan (WSP) which adequately considers-beyond the current framework of legal requirements-possible new hygienic-microbiologically relevant risks (especially emerging pathogens) for the drinking water supply. The development of a WSP within the framework of risk, monitoring and incident management includes the application of Geographical Information Systems (GIS). In the present study, GIS was used for visualization and spatial analysis in decisive steps in the WSP. The detailed process of GIS-supported implementation included the identification of local participants and their tasks and interactions as an essential part of risk management. A detailed ecological investigation of drinking water conditions in the catchment area was conducted in addition to hazard identification, risk assessment and the monitoring of control measures. The main task of our study was to find out in which steps of the WSP the implementation of GIS could be integrated as a useful, and perhaps even an essential tool.

  14. GIS-based production of digital soil map for Nigeria | Nkwunonwo ...

    African Journals Online (AJOL)

    Soil, a valuable natural resource can be said to play a part across the range of human existence and its knowledge is fundamental to its utilization and management. Soil maps provide a means of gaining understanding about the soil, but limitations in accuracy, revision and mode of presentation– relating to graphics or ...

  15. A comparative study on the predictive ability of the decision tree, support vector machine and neuro-fuzzy models in landslide susceptibility mapping using GIS

    Science.gov (United States)

    Pradhan, Biswajeet

    2013-02-01

    The purpose of the present study is to compare the prediction performances of three different approaches such as decision tree (DT), support vector machine (SVM) and adaptive neuro-fuzzy inference system (ANFIS) for landslide susceptibility mapping at Penang Hill area, Malaysia. The necessary input parameters for the landslide susceptibility assessments were obtained from various sources. At first, landslide locations were identified by aerial photographs and field surveys and a total of 113 landslide locations were constructed. The study area contains 340,608 pixels while total 8403 pixels include landslides. The landslide inventory was randomly partitioned into two subsets: (1) part 1 that contains 50% (4000 landslide grid cells) was used in the training phase of the models; (2) part 2 is a validation dataset 50% (4000 landslide grid cells) for validation of three models and to confirm its accuracy. The digitally processed images of input parameters were combined in GIS. Finally, landslide susceptibility maps were produced, and the performances were assessed and discussed. Total fifteen landslide susceptibility maps were produced using DT, SVM and ANFIS based models, and the resultant maps were validated using the landslide locations. Prediction performances of these maps were checked by receiver operating characteristics (ROC) by using both success rate curve and prediction rate curve. The validation results showed that, area under the ROC curve for the fifteen models produced using DT, SVM and ANFIS varied from 0.8204 to 0.9421 for success rate curve and 0.7580 to 0.8307 for prediction rate curves, respectively. Moreover, the prediction curves revealed that model 5 of DT has slightly higher prediction performance (83.07), whereas the success rate showed that model 5 of ANFIS has better prediction (94.21) capability among all models. The results of this study showed that landslide susceptibility mapping in the Penang Hill area using the three approaches (e

  16. GIS Fuzzy Expert System for the assessment of ecosystems vulnerability to fire in managing Mediterranean natural protected areas.

    Science.gov (United States)

    Semeraro, Teodoro; Mastroleo, Giovanni; Aretano, Roberta; Facchinetti, Gisella; Zurlini, Giovanni; Petrosillo, Irene

    2016-03-01

    A significant threat to the natural and cultural heritage of Mediterranean natural protected areas (NPAs) is related to uncontrolled fires that can cause potential damages related to the loss or a reduction of ecosystems. The assessment and mapping of the vulnerability to fire can be useful to reduce landscape damages and to establish priority areas where it is necessary to plan measures to reduce the fire vulnerability. To this aim, a methodology based on an interactive computer-based system has been proposed in order to support NPA's management authority for the identification of vulnerable hotspots to fire through the selection of suitable indicators that allow discriminating different levels of sensitivity (e.g. Habitat relevance, Fragmentation, Fire behavior, Ecosystem Services, Vegetation recovery after fire) and stresses (agriculture, tourism, urbanization). In particular, a multi-criteria analysis based on Fuzzy Expert System (FES) integrated in a GIS environment has been developed in order to identify and map potential "hotspots" of fire vulnerability, where fire protection measures can be undertaken in advance. In order to test the effectiveness of this approach, this approach has been applied to the NPA of Torre Guaceto (Apulia Region, southern Italy). The most fire vulnerable areas are the patch of century-old forest characterized by high sensitivity and stress, and the wetlands and century-old olive groves due to their high sensitivity. The GIS fuzzy expert system provides evidence of its potential usefulness for the effective management of natural protected areas and can help conservation managers to plan and intervene in order to mitigate the fire vulnerability in accordance with conservation goals. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Groundwater potentiality mapping using geoelectrical-based aquifer hydraulic parameters: A GIS-based multi-criteria decision analysis modeling approach

    Directory of Open Access Journals (Sweden)

    Kehinde Anthony Mogaji Hwee San Lim

    2017-01-01

    Full Text Available This study conducted a robust analysis on acquired 2D resistivity imaging data and borehole pumping test records to optimize groundwater potentiality mapping in Perak province, Malaysia using derived aquifer hydraulic properties. The transverse resistance (TR parameter was determined from the interpreted 2D resistivity imaging data by applying the Dar-Zarrouk parameter equation. Linear regression and GIS techniques were used to regress the estimated values for TR parameters with the aquifer transmissivity values extracted from the geospatially produced BPT records-based aquifer transmissivity map to develop the aquifer transmissivity parameter predictive (ATPP model. The reliability evaluated ATPP model using the Theil inequality coefficient measurement approach was used to establish geoelectrical-based hydraulic parameters (GHP modeling equations for the modeling of transmissivity (Tr, hydraulic conductivity (K, storativity (St, and hydraulic diffusivity (D properties. The applied GHP modeling equation results to the delineated aquifer media was used to produce aquifer potential conditioning factor maps for Tr, K, St, and D. The maps were modeled to develop an aquifer potential mapping index (APMI model via applying the multi-criteria decision analysis-analytic hierarchy process principle. The area groundwater reservoir productivity potential model map produced based on the processed APMI model estimates in the GIS environment was found to be 71% accurate. This study establishes a good alternative approach to determine aquifer hydraulic parameters even in areas where pumping test information is unavailable using a cost effective geophysical data. The produced map can be explored for hydrological decision making.

  18. Design of Mobile Operation and Maintenance System Based on Power GIS and GPS

    Directory of Open Access Journals (Sweden)

    Jing TAO

    2017-01-01

    Full Text Available In order to solve the low efficiency of operation and maintenance and the problems of management coordination caused by the coexistence of off-line operation and maintenance and multi system coexistence in current power telecommunication operation and maintenance, this paper proposes a mobile operation and maintenance system based on power GIS and GPS location technology. The system is based on the C/S architecture, and the mobile operation and maintenance terminal is connected with the operation and maintenance management terminal through wireless and wired network. In addition to meeting basic business requirements, the system integrates power GIS functions to visually demonstrate communication resources, personnel, and failures. The staff can use the wireless mobile terminal which integrated GPS module for to operate and maintain, and can locate accurately in real time.

  19. Geographic Information System (GIS) capabilities in traffic accident information management: a qualitative approach

    Science.gov (United States)

    Ahmadi, Maryam; Valinejadi, Ali; Goodarzi, Afshin; Safari, Ameneh; Hemmat, Morteza; Majdabadi, Hesamedin Askari; Mohammadi, Ali

    2017-01-01

    Background Traffic accidents are one of the more important national and international issues, and their consequences are important for the political, economical, and social level in a country. Management of traffic accident information requires information systems with analytical and accessibility capabilities to spatial and descriptive data. Objective The aim of this study was to determine the capabilities of a Geographic Information System (GIS) in management of traffic accident information. Methods This qualitative cross-sectional study was performed in 2016. In the first step, GIS capabilities were identified via literature retrieved from the Internet and based on the included criteria. Review of the literature was performed until data saturation was reached; a form was used to extract the capabilities. In the second step, study population were hospital managers, police, emergency, statisticians, and IT experts in trauma, emergency and police centers. Sampling was purposive. Data was collected using a questionnaire based on the first step data; validity and reliability were determined by content validity and Cronbach’s alpha of 75%. Data was analyzed using the decision Delphi technique. Results GIS capabilities were identified in ten categories and 64 sub-categories. Import and process of spatial and descriptive data and so, analysis of this data were the most important capabilities of GIS in traffic accident information management. Conclusion Storing and retrieving of descriptive and spatial data, providing statistical analysis in table, chart and zoning format, management of bad structure issues, determining the cost effectiveness of the decisions and prioritizing their implementation were the most important capabilities of GIS which can be efficient in the management of traffic accident information. PMID:28848627

  20. Geographic Information System (GIS) capabilities in traffic accident information management: a qualitative approach.

    Science.gov (United States)

    Ahmadi, Maryam; Valinejadi, Ali; Goodarzi, Afshin; Safari, Ameneh; Hemmat, Morteza; Majdabadi, Hesamedin Askari; Mohammadi, Ali

    2017-06-01

    Traffic accidents are one of the more important national and international issues, and their consequences are important for the political, economical, and social level in a country. Management of traffic accident information requires information systems with analytical and accessibility capabilities to spatial and descriptive data. The aim of this study was to determine the capabilities of a Geographic Information System (GIS) in management of traffic accident information. This qualitative cross-sectional study was performed in 2016. In the first step, GIS capabilities were identified via literature retrieved from the Internet and based on the included criteria. Review of the literature was performed until data saturation was reached; a form was used to extract the capabilities. In the second step, study population were hospital managers, police, emergency, statisticians, and IT experts in trauma, emergency and police centers. Sampling was purposive. Data was collected using a questionnaire based on the first step data; validity and reliability were determined by content validity and Cronbach's alpha of 75%. Data was analyzed using the decision Delphi technique. GIS capabilities were identified in ten categories and 64 sub-categories. Import and process of spatial and descriptive data and so, analysis of this data were the most important capabilities of GIS in traffic accident information management. Storing and retrieving of descriptive and spatial data, providing statistical analysis in table, chart and zoning format, management of bad structure issues, determining the cost effectiveness of the decisions and prioritizing their implementation were the most important capabilities of GIS which can be efficient in the management of traffic accident information.

  1. Soil erosion assessment using geographical information system (GIS) and remote sensing (RS) study from Ankara-Guvenc Basin, Turkey.

    Science.gov (United States)

    Dengiz, Orhan; Yakupoglu, Tugrul; Baskan, Oguz

    2009-05-01

    The objective of this research was to assess vulnerable soil erosion risk with qualitative approach using GIS in Ankara-Guvenc Basin. The study area is located about 44 km north of Ankara and covers 17.5 km2. The selected theme layers of this model include topographic factor, soil factors (depth, texture, impermeable horizon) and land use. Slope layer and land use-land cover data were prepared by using DEM and Landsat-TM satellite image. According to land use classification, the most common land use type and land cover are rangeland (50.5%) then, rainfed (36.4%), week forest land (3.2%), irrigated land (0.7%) and other various lands (rock out crop and lake) (9.2%). Each land characteristic is also considered as a thematic layer in geographical information systems (GIS) process. After combination of the layers, soil erosion risk map was produced. The results showed that 44.4% of the study area is at high soil erosion risk, whereas 42% of the study area is insignificantly and slightly susceptible to erosion risk. In addition, it was found that only 12.6% of the total area is moderately susceptible to erosion risk. Furthermore, conservation land management measures were also suggested for moderate, high and very high erosion risk areas in Ankara-Guvenc Basin.

  2. Groundwater vulnerability and risk mapping using GIS, modeling and a fuzzy logic tool.

    Science.gov (United States)

    Nobre, R C M; Rotunno Filho, O C; Mansur, W J; Nobre, M M M; Cosenza, C A N

    2007-12-07

    A groundwater vulnerability and risk mapping assessment, based on a source-pathway-receptor approach, is presented for an urban coastal aquifer in northeastern Brazil. A modified version of the DRASTIC methodology was used to map the intrinsic and specific groundwater vulnerability of a 292 km(2) study area. A fuzzy hierarchy methodology was adopted to evaluate the potential contaminant source index, including diffuse and point sources. Numerical modeling was performed for delineation of well capture zones, using MODFLOW and MODPATH. The integration of these elements provided the mechanism to assess groundwater pollution risks and identify areas that must be prioritized in terms of groundwater monitoring and restriction on use. A groundwater quality index based on nitrate and chloride concentrations was calculated, which had a positive correlation with the specific vulnerability index.

  3. Correction: Using participatory design to develop (public health decision support systems through GIS

    Directory of Open Access Journals (Sweden)

    Sawada Michael

    2007-11-01

    Full Text Available Abstract Background Organizations that collect substantial data for decision-making purposes are often characterized as being 'data rich' but 'information poor'. Maps and mapping tools can be very useful for research transfer in converting locally collected data into information. Challenges involved in incorporating GIS applications into the decision-making process within the non-profit (public health sector include a lack of financial resources for software acquisition and training for non-specialists to use such tools. This on-going project has two primary phases. This paper critically reflects on Phase 1: the participatory design (PD process of developing a collaborative web-based GIS tool. Methods A case study design is being used whereby the case is defined as the data analyst and manager dyad (a two person team in selected Ontario Early Year Centres (OEYCs. Multiple cases are used to support the reliability of findings. With nine producer/user pair participants, the goal in Phase 1 was to identify barriers to map production, and through the participatory design process, develop a web-based GIS tool suited for data analysts and their managers. This study has been guided by the Ottawa Model of Research Use (OMRU conceptual framework. Results Due to wide variations in OEYC structures, only some data analysts used mapping software and there was no consistency or standardization in the software being used. Consequently, very little sharing of maps and data occurred among data analysts. Using PD, this project developed a web-based mapping tool (EYEMAP that was easy to use, protected proprietary data, and permit limited and controlled sharing between participants. By providing data analysts with training on its use, the project also ensured that data analysts would not break cartographic conventions (e.g. using a chloropleth map for count data. Interoperability was built into the web-based solution; that is, EYEMAP can read many different

  4. Mapping and evaluation of snow avalanche risk using GIS technique in Rodnei National Park

    Science.gov (United States)

    Covǎsnianu, Adrian; Grigoraş, Ioan-Rǎducu; Covǎsnianu, Liliana-Elena; Iordache, Iulian; Balin, Daniela

    2010-05-01

    The study consisted in a precise mapping project (GPS field campaign, on-screen digitization of the topographic maps at 1:25.000 scale and updated with ASTER mission) of the Rodnei National Park area (Romanian Carpathians) with a focus on snow avalanche risk survey. Parameters taken into account were slope, aspect, altitude, landforms and roughness resulted from a high resolute numerical terrain model obtained by ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) mission. The resulted digital surface model with a spatial resolution of 10 m covered a total area of 187 square kilometers and was improved by the help of Topo to Raster tool. All these parameters were calibrated after a model applied onto Tatra Massive and also Ceahlău Mountain. The results were adapted and interpreted in accordance with European avalanche hazard scale. This work was made in the context of the elaboration of Risk Map and is directly concerning both the security of tourism activities but also the management of the Rodnei Natural Park. The extension of this method to similar mountain areas is ongoing.

  5. GIS Mapping and Monitoring of Cellular Communication Quality in Terms of Crowdsourcing

    Directory of Open Access Journals (Sweden)

    Zanozin Viktor Valeryevich

    2015-09-01

    Full Text Available At the present day the monitoring of mobile services quality is carried out in the framework of the internal audit of the enterprise communications. The Federal Service for Supervision of Communications, Information Technology and Mass Communications (Roskomnadzor does not yet have high-quality assurance techniques of services and conducts partial spot checks on the basis of existing normative legal acts (NLA. One of cellular communication quality monitoring method is Netmonitoring. Netmonitoring, as one of the possible types of quality control services provided by mobile operators, is described in this article. Netmonitoring is provided in the Astrakhan city on the Kirova street, Savushkina street, Kubanskya street, Magistralnaya street and other large streets of the city. There are more than 150 cellular level measurements. Netmonitoring is based on crowdsourcing and mobile mapping. Mobile mapping is the process of collecting geospatial data using mapping sensors mounted on a mobile platform. The search of base stations was carried out by means of such programs as Netmonitoring, Network Signal Info and Antennas. The resulting data, namely the network code, “cell ID” and local area code, were used for geo-information programs creation. The experience in designing KML and Visual Basic languages programs Netmonitoring and AstraNetMonitoring is described in this paper.

  6. Development of Zaozhuang Tourism Information System Based on WebGIS

    OpenAIRE

    Xiaofei Yan; Yanqiu Wang

    2012-01-01

    As a resource-exhausted city, Tourism as a pillar industry of economic transformation in Zaozhuang is fostered as a key point. The development of tourism industry is closely related to the information technology. In the paper, after analyzing the tourism situation of Zaozhuang, WebGIS and Virtual Reality technology are applied to the tourism industry, and Tourism Information System in Zaozhuang is developed. The successful development of this system will be a great breakthrough in the tourism...

  7. An Application of Geospatial Information Systems (GIS) Technology to Anatomic Dental Charting

    OpenAIRE

    Bartling, William C.; Schleyer, Titus K.L.

    2003-01-01

    Historically, an anatomic dental chart is a compilation of color-coded symbols and numbers used within a template, either paper or computerized, to create a graphic record of a patient’s oral health status. This poster depicts how Geospatial Information System (GIS) technology can be used to create an accurate, current anatomic dental chart that contains detailed information not present in current charting systems.

  8. TOXMAP®: Environmental Health Maps

    Data.gov (United States)

    U.S. Department of Health & Human Services — TOXMAP® is a Geographic Information System (GIS) that uses maps of the United States and Canada to help users visually explore data primarily from the EPA's Toxics...

  9. Managing TRANSPETRO pipeline integrity through the use of intensive geographic information systems (GIS); Gerenciando a integridade de dutos da TRANSPETRO com o uso intensivo de ferramenta de geoprocessamento (GIS)

    Energy Technology Data Exchange (ETDEWEB)

    Amado, Ulisses D. [PETROBRAS Transportes S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil); Barrozo, Andre; Correa, Fernando Luiz R.S.; Silva, Helder A.da [PricewaterhouseCoopers (Brazil)

    2005-07-01

    The GIS (Geographic Information System) is a system that monitors and crosses information of data bases and documents from the geographic localization of an object, allowing analyses integrated for the development of solutions. In it, data on objects of the real world they are stored in a base and on dynamic to a map in the screen of the computer. Intent to the potential of this tool, PETROBRAS Transportes S.A. - TRANSPETRO, invested in the creation of the GIS TRANSPETRO system that, using the geo-processing technology, optimizes the management of its network pipeline and guarantees a bigger trustworthiness to the operation. Thus, it became basic tool in the process of sustainability of the Program of Integrity of Ducts, created for the company to take care of to the demanding standards of its politics of Security, Environment and Health. Developed in partnership with the PricewaterhouseCoopers, it has as objective to congregate in one alone place the geo-referenced data of all cartographic base of the network pipeline and information of the equipment and ducts, making possible to the Units of Business to elaborate qualitative and quantitative analyses on the operation of the company. The system still foresees that all the refined data are shared with the other corporative systems, becoming efficient instrument to guide the taking of decision of the managers of the company. (author)

  10. Mapping in the cloud

    CERN Document Server

    Peterson, Michael P

    2014-01-01

    This engaging text provides a solid introduction to mapmaking in the era of cloud computing. It takes students through both the concepts and technology of modern cartography, geographic information systems (GIS), and Web-based mapping. Conceptual chapters delve into the meaning of maps and how they are developed, covering such topics as map layers, GIS tools, mobile mapping, and map animation. Methods chapters take a learn-by-doing approach to help students master application programming interfaces and build other technical skills for creating maps and making them available on the Internet. Th

  11. Challenges in using geographic information systems (GIS to understand and control malaria in Indonesia

    Directory of Open Access Journals (Sweden)

    Dale Pat

    2003-11-01

    Full Text Available Abstract Malaria is a mosquito-borne disease of global concern with 1.5 to 2.7 million people dying each year and many more suffering from it. In Indonesia, malaria is a major public health issue with around six million clinical cases and 700 deaths each year. Malaria is most prevalent in the developing countries of the world. Aid agencies have provided financial and technical assistance to malaria-prone countries in an effort to battle the disease. Over the past decade, the focus of some of this assistance has been in the provision of geographic information systems (GIS hardware, software and training. In theory, GIS can be a very effective tool in combating malaria, however, in practice there have been a host of challenges to its successful use. This review is based, in part, on the literature but also on our experience working with the Indonesian Ministry of Health. The review identifies three broad problem areas. The first of these relates to data concerns. Without adequate data, GIS is not very useful. Specific problem areas include: accurate data on the disease and how it is reported; basic environmental data on vegetation, land uses, topography, rainfall, etc.; and demographic data on the movement of people. The second problem area involves technology – specifically computer hardware, GIS software and training. The third problem area concerns methods – assuming the previous data and technological problems have been resolved – how can GIS be used to improve our understanding of malaria? One of the main methodological tools is spatial statistical analysis, however, this is a newly developing field, is not easy to understand and suffers from the fact that there is no agreement on standard methods of analysis. The paper concludes with a discussion of strategies that can be used to overcome some of these problems. One of these strategies involves using ArcView GIS software in combination with ArcExplorer (a public domain program that can

  12. GSM based real time remote radiation monitoring and mapping system

    International Nuclear Information System (INIS)

    Dodiya, Kamal; Gupta, Ashutosh; Padmanabhan, N.; Chaudhury, Probal; Pradeepkumar, K.S.

    2014-01-01

    Mobile Radiological Impact Assessment Laboratory (M-RIAL) has been developed in Radiation Safety Systems Division, Bhabha Atomic Research Centre for carrying out assessment of radioactive contamination following a nuclear or radiological emergency in a nuclear facility or in public domain. During such situations a large area is to be monitored for radiological impact assessment and availability of the monitored data in real-time to a control centre is a great advantage for the decision makers. Development and application of such a system has been described in this paper. The system can transmit real-time radiological data, acquired by the universal counting system of M-RIAL and tagged with positional information, wirelessly to an Emergency Response Centre (ERC) using Global System for Mobile (GSM) communication. The radiological profile of the affected area is then superimposed on Geographical Information System (GIS) at the ERC and which can be used for the generation of radiological impact maps for use as decision support

  13. A GIS-based fuzzy classification for mapping the agricultural soils for N-fertilizers use.

    Science.gov (United States)

    Assimakopoulos, J H; Kalivas, D P; Kollias, V J

    2003-06-20

    Special attention should be paid to the choice of the proper N-fertilizer, in order to avoid a further acidification and degradation of acid soils and at the same time to improve nitrogen use efficiency and to limit the nitrate pollution of the ground waters. Therefore, the risk of leaching of the fertilizer and of the acidification of the soils must be considered prior to any N-fertilizer application. The application of N-fertilizers to the soil requires a good knowledge of the soil-fertilizer relationship, which those who are planning the fertilization policy and/or applying it might not have. In this study, a fuzzy classification methodology is presented for mapping the agricultural soils according to the kind and the rate of application of N-fertilizer that should be used. The values of pH, clay, sand and carbonates soil variables are estimated at each point of an area by applying geostatistical techniques. Using the pH values three fuzzy sets: "no-risk-acidification"; "low-risk-acidification"; and "high-risk-acidification" are produced and the memberships of each point to the three sets are estimated. Additionally, from the clay and sand values the membership grade to the fuzzy set "risk-of-leaching" is calculated. The parameters and their values, which are used for the construction of the fuzzy sets, are based on the literature, the existing knowledge and the experimentation, of the soil-fertilizer relationships and provide a consistent mechanism for mapping the soils according to the type of N-fertilizers that should be applied and the rate of applications. The maps produced can easily be interpreted and used by non-experts in the application of the fertilization policy at national, local and farm level. The methodology is presented through a case study using data from the Amfilochia area, west Greece.

  14. GIS-BASED PALEO-HYDROGRAPHICAL STUDY FOR TERRITORIAL DEVELOPMENT PLANNING OF THE RENO BASIN USING XVIII CENTURY ANDREA CHIESA HISTORICAL MAPS (BOLOGNA, ITALY

    Directory of Open Access Journals (Sweden)

    Matteo Brusa

    2012-06-01

    Full Text Available This paper focuses on the use of GIS with historical maps of the Bologna plain. A. Chiesa was entrusted, in 1732, by the Senate of Bologna to create a geographical map of the entire plain, with particular reference to the waterways, in order to provide an overall view and to plan considerable land reclamation. After digital acquisition, the maps were georeferenced in a new two-stage technique, using the international UTM-WGS84 datum. The elements contained in the maps were digitized using different layers: points for settlements, polylines for the waterways and polygons for marshes. A database was created to complete the digital representation. These data were compared with the current hydrographic situation. The main interest is the understanding of the relationships between paleochannels and micromorphology, in order to prevent hydrogeological risk. The study of the A. Chiesa maps is important to understand the evolution of toponyms, to highlight the centuriation and as a decisional support in territorial development plans. The popularization of the digitally obtained layers over a topographic regional map must be carried out using a webGIS application that is accessible and immediately understandable by the general public.

  15. Intelligent Business Systems for Satisfying the Demanding Requests of the Customers Using GIS Technologies

    Directory of Open Access Journals (Sweden)

    Catalin Lupu

    2007-01-01

    Full Text Available Electronic Business, or “E-business”, maybe defined broadly as any business process that relies onan automated information system. Today, this is mostlydone with Web-based technologies. In practice, ebusinessis more than just e-commerce. E-businessinvolves business processes spanning the entire valuechain: electronic purchasing and supply chainmanagement, processing orders electronically, handlingcustomer service, and cooperating with businesspartners. The GIS exist all over the world and this solvesdifferent problems. In business administration - the GIStechnology develops in the traditional GIS communityand thus becomes a component integrated in theinformational infrastructure of many organizations. GISassures essential informational instruments for differentclasses of informational systems. As IT users, you mayhave the possibility to use the best instruments for: to coordinateand communicate the main concepts betweenthe departments of an organization; to pass importantinformation inside the organization; to administrate andto keep an infrastructure that focuses on spatial data.

  16. Środowisko programowe Microstation dla celów GIS

    OpenAIRE

    Kunz, Mieczysław

    2001-01-01

    Praca przedstawia środowisko programowe MicroStation – historię jego rozwoju, strukturę oraz opisuje wybrane aplikacje dla zastosowań GIS/SIT. Na Wydziale BiNoZ UMK jest on stosowany do tworzenia map i systemów GIS dla wybranych obszarów Borów Tucholskich i Kujaw. Paper presents the MicroStation software – the history of its evolution, structure and description of the extension for GIS/SIT applications. Its applied for the map creation and GIS for selected region of Bory Tucholskie and K...

  17. Mapping of coastal aquifer vulnerable zone in the south west coast of Kanyakumari, South India, using GIS-based DRASTIC model.

    Science.gov (United States)

    Kaliraj, S; Chandrasekar, N; Peter, T Simon; Selvakumar, S; Magesh, N S

    2015-01-01

    The south west coast of Kanyakumari district in Tamil Nadu, India, is significantly affected by seawater intrusion and diffusion of pollutants into the aquifers due to unregulated beach placer mining and other anthropogenic activities. The present study investigates the vulnerability of the coastal aquifers using Geographic Information System (GIS)-based DRASTIC model. The seven DRASTIC parameters have been analyzed using the statistical equation of this model to demarcate the vulnerable zones for aquifer contamination. The vulnerability index map is prepared from the weighted spatial parameters, and an accounting of total index value ranged from 85 to 213. Based on the categorization of vulnerability classes, the high vulnerable zones are found near the beach placer mining areas between Manavalakurichi and Kodimanal coastal stretches. The aquifers associated with settlements and agricultural lands in the middle-eastern part have experienced high vulnerability due to contaminated water bodies. Similarly, the coastal areas of Thengapattinam and Manakudi estuary and around the South Tamaraikulam have also been falling under high vulnerability condition due to backwater and saltpan. In general, the nearshore region except the placer mining zone and the backwater has a moderately vulnerable condition, and the vulnerability index values range from 149 to180. Significantly, the northern and northeastern uplands and some parts of deposition zones in the middle-south coast have been identified as low to no vulnerable conditions. They are structurally controlled by various geological features such as charnockite, garnet biotite gneiss and granites, and sand dunes, respectively. The aquifer vulnerability assessment has been cross-verified by geochemical indicators such as total dissolved solids (TDS), Cl(-), HCO₃(-), and Cl(-)/HCO₃(-) ratio. The high ranges of TDS (1,842--3,736 mg/l) and Cl(-) (1,412--2,112 mg/l) values are well correlated with the observed high

  18. GIS-based landslide susceptibility mapping models applied to natural and urban planning in Trikala, Central Greece

    Directory of Open Access Journals (Sweden)

    Skilodimou, H. D.

    2009-06-01

    Full Text Available Landslide susceptibility mapping is a practical tool in natural and urban planning; it can be applied for determining land use zones, in construction design and planning of a variety of projects. In this study, two different GIS based landslide susceptibility maps were generated in the mountainous part of the Trikala Prefecture in Thessaly, Central Greece. This was accomplished by using different methods for correlating factors, which have an effect on landslide occurrences. The instability factors taken into account were: lithology, tectonic features, slope gradients, road network, drainage network, land use and rainfall. A frequency distribution of the half number of the landslide events of the study area in each class of the instability factors was performed in order to rate the classes. Two models have been used to combine the instability factors and assess the overall landslide susceptibility, namely: the Weight Factor Model (WeF, which is a statistical method, and the Multiple Factor Model (MuF that is a logical method. The produced maps were classified into four zones: Low, Moderate, High and Very High susceptible zones and validated using the other half number of the landslide events of the area. Evaluation of the results is optimized through a Landslide Models Indicator (La.M.I..Los mapas de susceptibilidad de deslizamientos representan una práctica herramienta en la planificación urbana y de espacios naturales. Así, puede aplicarse a la determinación de los usos de terrenos, en el diseño de construcción civil y para la planificación de gran variedad de actividades. En este estudio se generaron dos tipos diferentes de mapas de susceptibilidad basados en GIS para la parte montañosa de la prefectura de Trikala en Tesalia (Grecia Central. Estos se llevaron a cabo usando dos métodos de correlación de los factores que pueden tener un efecto en la generación de deslizamientos. Los factores de desestabilización tenidos en cuenta

  19. A GIS System for Inferring Subsurface Geology and Material Properties: Proof of Concept

    Science.gov (United States)

    2006-09-01

    depressions generally light but speckled; pits are dark toned uniform light tones with white- laced gullies or dull and uniform without white- laced ...our fully developed GIS system is unlikely to have. Additional research using neural networks as a predictive tool not requiring similarly...in prep.) Predicting fracture trace length from imagery using neural networks. Ehlen, J., R. A. Hevenor, J. Kemeny, and K. Girdner. 1995. Fracture

  20. Nitrate Measurment in Water Source of Karaj City and Zonning it Geographic Information Systems (GIS)

    OpenAIRE

    A.R. Shakib; J. Rahimi; M. Noori Sepehr; M. Zarrabi

    2015-01-01

    Background & Objectives: Nitrate is one of drinking water pollutant which is introduced to water body from municipal wastewater. Information on nitrate concentration and its distribution in water resource is necessary in safe drinking water supply. For that reason, the present work was done for investigation of nitrate in Karaj water supply resource and its zonning with Geographic Information Systems (GIS). Materials and Methods: In this work, the nitrate concentration in 200 wells of Karaj w...

  1. Soil information system of Arunachal Pradesh in a GIS environment for land use planning

    Science.gov (United States)

    Maji, Amal K.; Nayak, Dulal C.; Krishna, Nadimpalli, , DR; Srinivas, Challa V.; Kamble, Kalpana; Reddy, Gangalakunta P. Obi; Velayutham, Mariappan

    Arunachal Pradesh, the largest mountainous state of India, is situated in the northeastern part of the Himalayan region and characterized by high annual rainfall, forest vegetation and diversity in soils. Information on the soils of the state is essential for scientific land use planning and sustainable production. A soil resource inventory and subsequent database creation for thematic mapping using a Geographical Information System (GIS) is presented in this paper. Physiographically, Arunachal Pradesh can be divided into four distinct zones: snow-capped mountains (5500 m amsl); lower Himalayan ranges (3500 m amsl); the sub-Himalayan Siwalik hills (700 m amsl); and the eastern Assam plains. Soils occurring in these physiographic zones are Inceptisols (37 percent), Entisols (35 percent), Ultisols (14 percent) and Alfisols (0.5 percent). The remaining soils can be classed as miscellaneous. Soil resource inventory studies show that the soils of the warm perhumid eastern Himalayan ecosystem, with a 'thermic' temperature regime, are Inceptisols and Entisols; and that they are highly acidic in nature. Soils of the warm perhumid Siwalik hill ecosystem, with a 'hyperthermic' temperature regime, are also Entisols and Inceptisols with a high to moderate acidic condition. The dominant soils of the northeastern Purvachal hill ecosystem, with 'hyperthermic' and 'thermic' temperature regimes, are Ultisols and Inceptisols. Inceptisols and Entisols are the dominant soils in the hot and humid plain ecosystem. Steeply sloping landform and high rainfall are mainly responsible for a high erosion hazard in the state. The soil erosion map indicates that very severe (20 percent of TGA) to severe (25 percent of TGA) soil erosion takes place in the warm per-humid zone, whereas, moderate erosion takes place in the Siwalik hills and hot, humid plain areas. This is evident from the soil depth class distribution of Arunachal Pradesh, which shows that shallow soils cover 20 percent of the TGA

  2. Applications of geographic information systems (GIS) for highway traffic noise analysis : case studies of select transportation agencies

    Science.gov (United States)

    2012-11-30

    Noise from highway traffic can be pervasive in areas near roadways. How and to what extent noise travels is strongly influenced by geospatial features such as terrain and elevation. Thus geographic information systems (GIS), which enable users to mor...

  3. Air pollution simulation and geographical information systems (GIS) applied to Athens International Airport.

    Science.gov (United States)

    Theophanides, Mike; Anastassopoulou, Jane

    2009-07-01

    This study presents an improved methodology for analysing atmospheric pollution around airports using Gaussian-plume numerical simulation integrated with Geographical Information Systems (GIS). The new methodology focuses on streamlining the lengthy analysis process for Airport Environmental Impact Assessments by integrating the definition of emission sources, simulating and displaying the results in a GIS environment. One of the objectives of the research is to validate the methodology applied to the Athens International Airport, "Eleftherios Venizelos", to produce a realistic estimate of emission inventories, dispersion simulations and comparison to measured data. The methodology used a combination of the Emission Dispersion and Modelling System (EDMS) and the Atmospheric Dispersion and Modelling system (ADMS) to improve the analysis process. The second objective is to conduct numerical simulations under various adverse conditions (e.g. scenarios) and assess the dispersion in the surrounding areas. The study concludes that the use of GIS in environmental assessments provides a valuable advantage for organizing data and entering accurate geographical/topological information for the simulation engine. Emissions simulation produced estimates within 10% of published values. Dispersion simulations indicate that airport pollution will affect neighbouring cities such as Rafina and Loutsa. Presently, there are no measured controls in these areas. In some cases, airport pollution can contribute to as much as 40% of permissible EU levels in VOCs.

  4. Implementation of cartographic symbols for planetary mapping in geographic information systems

    Science.gov (United States)

    Nass, A.; van Gasselt, S.; Jaumann, R.; Asche, H.

    2011-09-01

    The steadily growing international interest in the exploration of planets in our Solar System and many advances in the development of space-sensor technology have led to the launch of a multitude of planetary missions to Mercury, Venus, the Earth's moon, Mars and various Outer-Solar System objects, such as the Jovian and Saturnian satellites. Camera instruments carried along on these missions image surfaces in different wavelength ranges and under different viewing angles, permitting additional data to be derived, such as spectral data or digital terrain models. Such data enable researchers to explore and investigate the development of planetary surfaces by analyzing and interpreting the inventory of surface units and structures. Results of such work are commonly abstracted and represented in thematic, mostly geological and geomorphological, maps. In order to facilitate efficient collaboration among different planetary research disciplines, mapping results need to be prepared, described, managed, archived, and visualized in a uniform way. These tasks have been increasingly carried out by means of computer-based geographic information systems (GIS or GI systems) which have come to be widely employed in the field of planetary research since the last two decades. In this paper we focus on the simplification of mapping processes, putting specific emphasis on a cartographically correct visualization of planetary mapping data using GIS-based environments. We present and discuss the implementation of a set of standardized cartographic symbols for planetary mapping based on the Digital Cartographic Standard for Geologic Map Symbolization as prepared by the United States Geological Survey (USGS) for the Federal Geographic Data Committee (FGDC). Furthermore, we discuss various options to integrate this symbol catalog into generic GI systems, and more specifically into the Environmental Systems Research Institute's (ESRI) ArcGIS environment, and focus on requirements for

  5. Documentation of Cultural Heritages Using a GIS Based Information and Management System; Case Study of Safranbolu

    Science.gov (United States)

    Seker, D. Z.; Alkan, M.; Kutoglu, S. S.; Akcin, H.

    2010-12-01

    Documentation of the cultural heritage sites is extremely important for monitoring and preserves them from natural disasters and human made activities. Due to its very rich historical background from the first human settlements in Catalhoyuk and Alacahoyuk and civilizations such as Byzantine, Seljuk and Ottoman, there are lots of cultural heritage sites in Turkey. 3D modeling and recording of historical buildings using modern tools and techniques in several locations of Turkey have been conducted and still continuing. The nine cultural sites in Turkey are included in the protection list of UNESCO as cultural heritage and one of them is the township of Safranbolu, which is the one of the most outstanding example of the traditional Turkish Architecture and also unique itself in terms of conservation of the human settlement in their authentic environmental motif up till now. In this study outcomes and further studies of a research project related to study area which is supported by the Turkish National Research Center (TUBITAK) with the project number 106Y157, will be presented in details. The basic aim of the study is development a GIS based information and management system for the city of Safranbolu. All historical buildings which are registered are assigned with the database. 3D modeling some of the selected building among the buildings which are registered as historical monuments using different data comes from different sources similar to their original constructions were realized and then it will be distributed via internet by a web-based information system designed during the project. Also some of the buildings were evaluated using close range photogrammetric technique to obtain their façade reliefs, were also assigned with the database. Designed database consists of 3D models, locations, historical information, cadastral and land register data of the selected buildings together with the other data collected during the project related to buildings. Using this

  6. Using a binary logistic regression method and GIS for evaluating and mapping the groundwater spring potential in the Sultan Mountains (Aksehir, Turkey)

    Science.gov (United States)

    Ozdemir, Adnan

    2011-07-01

    SummaryThe purpose of this study is to produce a groundwater spring potential map of the Sultan Mountains in central Turkey, based on a logistic regression method within a Geographic Information System (GIS) environment. Using field surveys, the locations of the springs (440 springs) were determined in the study area. In this study, 17 spring-related factors were used in the analysis: geology, relative permeability, land use/land cover, precipitation, elevation, slope, aspect, total curvature, plan curvature, profile curvature, wetness index, stream power index, sediment transport capacity index, distance to drainage, distance to fault, drainage density, and fault density map. The coefficients of the predictor variables were estimated using binary logistic regression analysis and were used to calculate the groundwater spring potential for the entire study area. The accuracy of the final spring potential map was evaluated based on the observed springs. The accuracy of the model was evaluated by calculating the relative operating characteristics. The area value of the relative operating characteristic curve model was found to be 0.82. These results indicate that the model is a good estimator of the spring potential in the study area. The spring potential map shows that the areas of very low, low, moderate and high groundwater spring potential classes are 105.586 km 2 (28.99%), 74.271 km 2 (19.906%), 101.203 km 2 (27.14%), and 90.05 km 2 (24.671%), respectively. The interpretations of the potential map showed that stream power index, relative permeability of lithologies, geology, elevation, aspect, wetness index, plan curvature, and drainage density play major roles in spring occurrence and distribution in the Sultan Mountains. The logistic regression approach has not yet been used to delineate groundwater potential zones. In this study, the logistic regression method was used to locate potential zones for groundwater springs in the Sultan Mountains. The evolved model

  7. Food Delivery System with the Utilization of Vehicle Using Geographical Information System (GIS) and A Star Algorithm

    Science.gov (United States)

    Siregar, B.; Gunawan, D.; Andayani, U.; Sari Lubis, Elita; Fahmi, F.

    2017-01-01

    Food delivery system is one kind of geographical information systems (GIS) that can be applied through digitation process. The main case in food delivery system is the way to determine the shortest path and food delivery vehicle movement tracking. Therefore, to make sure that the digitation process of food delivery system can be applied efficiently, it is needed to add shortest path determination facility and food delivery vehicle tracking. This research uses A Star (A*) algorithm for determining shortest path and location-based system (LBS) programming for moving food delivery vehicle object tracking. According to this research, it is generated the integrated system that can be used by food delivery driver, customer, and administrator in terms of simplifying the food delivery system. Through the application of shortest path and the tracking of moving vehicle, thus the application of food delivery system in the scope of geographical information system (GIS) can be executed.

  8. A Vein Map Biometric System

    Directory of Open Access Journals (Sweden)

    Felix Fuentes

    2013-08-01

    Full Text Available There is increasing demand world-wide, from government agencies and the private sector for cutting-edge biometric security technology that is difficult to breach but userfriendly at the same time. Some of the older tools, such as fingerprint, retina and iris scanning, and facial recognition software have all been found to have flaws and often viewed negatively because of many cultural and hygienic issues associated with them. Comparatively, mapping veins as a human barcode, a new technology, has many advantages over older technologies. Specifically, reproducing a three-dimensional model of a human vein system is impossible to replicate. Vein map technology is distinctive because of its state-of-the-art sensors are only able to recognize vein patterns if hemoglobin is actively flowing through the person

  9. CRESST Human Performance Knowledge Mapping System

    National Research Council Canada - National Science Library

    Chung, Gregory K; Michiuye, Joanne K; Brill, David G; Sinha, Ravi; Saadat, Farzad; de Vries, Linda F; Delacruz, Girlie C; Bewley, William L; Baker, Eva L

    2002-01-01

    .... While several tools exist that are available to construct knowledge maps, CRESST's knowledge mapping tool is one of the only systems designed specifically for assessment purposes, the only system...

  10. CRESST Human Performance Knowledge Mapping System

    National Research Council Canada - National Science Library

    Chung, Gregory K; Michiuye, Joanne K; Brill, David G; Sinha, Ravi; Saadat, Farzad; de Vries, Linda F; Delacruz, Girlie C; Bewley, William L; Baker, Eva L

    2002-01-01

    .... This report presents a review of knowledge mapping scoring methods and current online mapping systems, and the overall design, functionality, scoring, usability testing, and authoring capabilities of the CRESST system...

  11. Geographical information system (GIS) suitability analysis of radioactive waste repository site in Pahang, Malaysia

    International Nuclear Information System (INIS)

    Faizal Azrin Abd Razalim; Noraini Surip; Ahmad Hasnulhadi; Nazran Harun; Nurul Nadia Abd Malek; Roziah Che Musa

    2010-01-01

    The aim of this project is to identify a suitable site for radioactive waste repository in Pahang using remote sensing and geographical information system (GIS) technologies. There are ten parameters considered in the analysis, which divided into Selection Criteria and Exclusion Criteria. The Selection Criteria parameters consists of land use, rainfall, lineament, slope, groundwater potential and elevation while Exclusion Criteria parameters consist of urban, protected land and island. Furthermore, all parameters were integrated, given weight age and ranked for site selection evaluation in GIS environment. At the first place, about twelve sites have been identified as suitable sites for radioactive waste repository throughout the study area. These sites were further analysed by ground checking on the physical setting including geological, drainage, and population density in order to finalise three most suitable sites for radioactive waste repository. (author)

  12. Role of remote sensing, geographical information system (GIS) and bioinformatics in kala-azar epidemiology.

    Science.gov (United States)

    Bhunia, Gouri Sankar; Dikhit, Manas Ranjan; Kesari, Shreekant; Sahoo, Ganesh Chandra; Das, Pradeep

    2011-11-01

    Visceral leishmaniasis or kala-azar is a potent parasitic infection causing death of thousands of people each year. Medicinal compounds currently available for the treatment of kala-azar have serious side effects and decreased efficacy owing to the emergence of resistant strains. The type of immune reaction is also to be considered in patients infected with Leishmania donovani (L. donovani). For complete eradication of this disease, a high level modern research is currently being applied both at the molecular level as well as at the field level. The computational approaches like remote sensing, geographical information system (GIS) and bioinformatics are the key resources for the detection and distribution of vectors, patterns, ecological and environmental factors and genomic and proteomic analysis. Novel approaches like GIS and bioinformatics have been more appropriately utilized in determining the cause of visearal leishmaniasis and in designing strategies for preventing the disease from spreading from one region to another.

  13. Anaerobic digester systems (ADS) for multiple dairy farms: A GIS analysis for optimal site selection

    International Nuclear Information System (INIS)

    Thompson, Ethan; Wang, Qingbin; Li, Minghao

    2013-01-01

    While anaerobic digester systems (ADS) have been increasingly adopted by large dairy farms to generate marketable energy products, like electricity, from animal manure, there is a growing need for assessing the feasibility of regional ADS for multiple farms that are not large enough to capitalize their own ADS. Using geographical information system (GIS) software, this study first identifies potential sites in a dairy region in Vermont, based on geographical conditions, current land use types, and energy distribution infrastructure criteria, and then selects the optimal sites for a given number of ADS, based on the number of dairy farms to be served, the primary energy input to output (PEIO) ratio of ADS, and the existing transportation network. This study suggests that GIS software is a valid technical tool for identifying the potential and optimal sites for ADS. The empirical findings provide useful information for assessing the returns of alternative numbers of ADS in this region, and the research procedures can be modified easily to incorporate any changes in the criteria for this region and can be applied in other regions with different conditions and criteria. - Highlights: • This study examines the feasibility of regional ADS for multiple dairy farms. • GIS is used to identify candidate sites and optimal locations for ADS in a dairy region. • Model includes environmental, social, infrastructure, and energy return criteria. • Empirical analysis provides scenario results on 1–15 ADS in the study region. • Method could be applied to other regions with different conditions and criteria

  14. Geographical information system (GIS) application for flood prediction at Sungai Sembrong

    Science.gov (United States)

    Kamin, Masiri; Ahmad, Nor Farah Atiqah; Razali, Siti Nooraiin Mohd; Hilaham, Mashuda Mohamad; Rahman, Mohamad Abdul; Ngadiman, Norhayati; Sahat, Suhaila

    2017-10-01

    The occurrence of flood is one of natural disaster that often beset Malaysia. The latest incident that happened in 2007 was the worst occurrence of floods ever be set in Johor. Reporting floods mainly focused on rising water rising levels, so about once a focus on the area of flood delineation. A study focused on the effectiveness of using Geographic Information System (GIS) to predict the flood by taking Sg. Sembrong, Batu Pahat, Johor as study area. This study combined hydrological model and water balance model in the display to show the expected flood area for future reference. The minimum, maximum and average rainfall data for January 2007 at Sg Sembrong were used in this study. The data shows that flood does not occurs at the minimum and average rainfall of 17.2mm and 2mm respectively. At maximum rainfall, 203mm, shows the flood area was 9983 hectares with the highest level of the water depth was 2m. The result showed that the combination of hydrological models and water balance model in GIS is very suitable to be used as a tool to obtain preliminary information on flood immediately. Besides that, GIS system is a very powerful tool used in hydrology engineering to help the engineer and planner to imagine the real situation of flood events, doing flood analysis, problem solving and provide a rational, accurate and efficient decision making.

  15. An overview of a GIS method for mapping landslides and assessing landslide susceptibility in the Río La Carbonera watershed, on the SE flank of Pico de Orizaba Volcano, Mexico.

    Science.gov (United States)

    Legorreta Paulin, G.; Bursik, M. I.; Contreras, T.

    2015-12-01

    This poster provides an overview of the on-going research project (Grant PAPIIT # IN102115) from the Institute of Geography at the National Autonomous University of Mexico (UNAM) that seeks to conduct a multi-temporal landslide inventory, produce a landslide susceptibility map, and estimate sediment production by using Geographic Information Systems (GIS). The Río La Carbonera watershed on the southeastern flank of Pico de Orizaba volcano, the highest mountain in Mexico, is selected as a study area. The catchment covers 71.9 km2 with elevations ranging from 1224 to 3643 m a.s.l. and hillslopes between landslides. The methodology encompasses three main stages of analysis to assess landslide hazards: Stage 1 builds a historic landslide inventory. In the study area, an inventory of more than 200 landslides is created from multi-temporal aerial-photo-interpretation and local field surveys to assess landslide distribution. All landslides were digitized into a geographic information system (GIS), and a spatial geo-database of landslides was constructed from standardized GIS datasets. Stage 2 calculates the susceptibility for the watershed. During this stage, (SINMAP using default values) is evaluated. Stage 3 Estimate the potential total material delivered to the main stream drainage channel by all landslides in the catchment. Detailed geometric measurements of individual landslides visited during the field work will be carried out to obtain the landslide area and volume. These measurements revealed an empirical relationship between area and volume that took the form of a power law. This relationship will be used to estimate the potential volume of material delivered to the catchment. The technique and its implementation of each stage in a GIS-based technology is presented and discussed.

  16. Towards a Geographic Information Systems (GIS) Approach in ...

    African Journals Online (AJOL)

    It has been observed in Kenya that the inadequacy and or the inappropriate land related information systems is the single major constraint in the effective and efficient management of land for housing, security of tenure and determination of property rights. The purpose of this paper is therefore to highlight areas in housing ...

  17. Decision support system for the response to infectious disease emergencies based on WebGIS and mobile services in China.

    Science.gov (United States)

    Li, Ya-pin; Fang, Li-qun; Gao, Su-qing; Wang, Zhen; Gao, Hong-wei; Liu, Peng; Wang, Ze-Rui; Li, Yan-Li; Zhu, Xu-Guang; Li, Xin-Lou; Xu, Bo; Li, Yin-Jun; Yang, Hong; de Vlas, Sake J; Shi, Tao-Xing; Cao, Wu-Chun

    2013-01-01

    For years, emerging infectious diseases have appeared worldwide and threatened the health of people. The emergence and spread of an infectious-disease outbreak are usually unforeseen, and have the features of suddenness and uncertainty. Timely understanding of basic information in the field, and the collection and analysis of epidemiological information, is helpful in making rapid decisions and responding to an infectious-disease emergency. Therefore, it is necessary to have an unobstructed channel and convenient tool for the collection and analysis of epidemiologic information in the field. Baseline information for each county in mainland China was collected and a database was established by geo-coding information on a digital map of county boundaries throughout the country. Google Maps was used to display geographic information and to conduct calculations related to maps, and the 3G wireless network was used to transmit information collected in the field to the server. This study established a decision support system for the response to infectious-disease emergencies based on WebGIS and mobile services (DSSRIDE). The DSSRIDE provides functions including data collection, communication and analyses in real time, epidemiological detection, the provision of customized epidemiological questionnaires and guides for handling infectious disease emergencies, and the querying of professional knowledge in the field. These functions of the DSSRIDE could be helpful for epidemiological investigations in the field and the handling of infectious-disease emergencies. The DSSRIDE provides a geographic information platform based on the Google Maps application programming interface to display information of infectious disease emergencies, and transfers information between workers in the field and decision makers through wireless transmission based on personal computers, mobile phones and personal digital assistants. After a 2-year practice and application in infectious disease

  18. Decision support system for the response to infectious disease emergencies based on WebGIS and mobile services in China.

    Directory of Open Access Journals (Sweden)

    Ya-pin Li

    Full Text Available For years, emerging infectious diseases have appeared worldwide and threatened the health of people. The emergence and spread of an infectious-disease outbreak are usually unforeseen, and have the features of suddenness and uncertainty. Timely understanding of basic information in the field, and the collection and analysis of epidemiological information, is helpful in making rapid decisions and responding to an infectious-disease emergency. Therefore, it is necessary to have an unobstructed channel and convenient tool for the collection and analysis of epidemiologic information in the field.Baseline information for each county in mainland China was collected and a database was established by geo-coding information on a digital map of county boundaries throughout the country. Google Maps was used to display geographic information and to conduct calculations related to maps, and the 3G wireless network was used to transmit information collected in the field to the server. This study established a decision support system for the response to infectious-disease emergencies based on WebGIS and mobile services (DSSRIDE. The DSSRIDE provides functions including data collection, communication and analyses in real time, epidemiological detection, the provision of customized epidemiological questionnaires and guides for handling infectious disease emergencies, and the querying of professional knowledge in the field. These functions of the DSSRIDE could be helpful for epidemiological investigations in the field and the handling of infectious-disease emergencies.The DSSRIDE provides a geographic information platform based on the Google Maps application programming interface to display information of infectious disease emergencies, and transfers information between workers in the field and decision makers through wireless transmission based on personal computers, mobile phones and personal digital assistants. After a 2-year practice and application in

  19. Analysis Of Educational Services Distribution-Based Geographic Information System GIS

    Directory of Open Access Journals (Sweden)

    Waleed Lagrab

    2015-03-01

    Full Text Available Abstract This study analyzes the spatial distribution of kindergarten facilities in the study area based on the Geographic Information Systems GIS in order to test an efficiency of GIS technology to redistribute the existing kindergarten and choose the best location in the future and applying the standard criteria for selecting the suitable locations for kindergarten. To achieve this goal the data and information are collected via interviews and comprehensive statistics on the education facilities in Mukalla districts in YEMEN which contributed to building a geographic database for the study area. After that the Kindergarten spatial patterns are analyzed in terms of proximity to each other and used near some other land in the surrounding area such as streets highways factories etc. Also measures the concentration dispersion clustering and distribution direction for the kindergarten this study showed the effectiveness of the GIS for spatial data analysis. One of the most important finding that most of the Kindergarten was established in Mukalla city did not take into account the criteria that set by the authorities. Furthermore almost district suffers from a shortage in the number of kindergarten and pattern of distribution of those kindergartens dominated by spatial dispersed.

  20. PI2GIS: processing image to geographical information systems, a learning tool for QGIS

    Science.gov (United States)

    Correia, R.; Teodoro, A.; Duarte, L.

    2017-10-01

    To perform an accurate interpretation of remote sensing images, it is necessary to extract information using different image processing techniques. Nowadays, it became usual to use image processing plugins to add new capabilities/functionalities integrated in Geographical Information System (GIS) software. The aim of this work was to develop an open source application to automatically process and classify remote sensing images from a set of satellite input data. The application was integrated in a GIS software (QGIS), automating several image processing steps. The use of QGIS for this purpose is justified since it is easy and quick to develop new plugins, using Python language. This plugin is inspired in the Semi-Automatic Classification Plugin (SCP) developed by Luca Congedo. SCP allows the supervised classification of remote sensing images, the calculation of vegetation indices such as NDVI (Normalized Difference Vegetation Index) and EVI (Enhanced Vegetation Index) and other image processing operations. When analysing SCP, it was realized that a set of operations, that are very useful in teaching classes of remote sensing and image processing tasks, were lacking, such as the visualization of histograms, the application of filters, different image corrections, unsupervised classification and several environmental indices computation. The new set of operations included in the PI2GIS plugin can be divided into three groups: pre-processing, processing, and classification procedures. The application was tested consider an image from Landsat 8 OLI from a North area of Portugal.

  1. A WebGIS system on the base of satellite data processing system for marine application

    Science.gov (United States)

    Gong, Fang; Wang, Difeng; Huang, Haiqing; Chen, Jianyu

    2007-10-01

    From 2002 to 2004, a satellite data processing system for marine application had been built up in State Key Laboratory of Satellite Ocean Environment Dynamics (Second Institute of Oceanography, State Oceanic Administration). The system received satellite data from TERRA, AQUA, NOAA-12/15/16/17/18, FY-1D and automatically generated Level3 products and Level4 products(products of single orbit and merged multi-orbits products) deriving from Level0 data, which is controlled by an operational control sub-system. Currently, the products created by this system play an important role in the marine environment monitoring, disaster monitoring and researches. Now a distribution platform has been developed on this foundation, namely WebGIS system for querying and browsing of oceanic remote sensing data. This system is based upon large database system-Oracle. We made use of the space database engine of ArcSDE and other middleware to perform database operation in addition. J2EE frame was adopted as development model, and Oracle 9.2 DBMS as database background and server. Simply using standard browsers(such as IE6.0), users can visit and browse the public service information that provided by system, including browsing for oceanic remote sensing data, and enlarge, contract, move, renew, traveling, further data inquiry, attribution search and data download etc. The system is still under test now. Founding of such a system will become an important distribution platform of Chinese satellite oceanic environment products of special topic and category (including Sea surface temperature, Concentration of chlorophyll, and so on), for the exaltation of satellite products' utilization and promoting the data share and the research of the oceanic remote sensing platform.

  2. The effects of geographic information system (GIS) technologies on students' attitudes, self-efficacy, and achievement in middle school science classrooms

    Science.gov (United States)

    Baker, Thomas Ray

    Since the publication of the National Science Education Standards , a concerted and evolving movement to make science classrooms more inquiry-oriented has been building. The proliferation of models of teaching and learning where questions and investigations drive learning, while not new are also not easy to plan, implement, or evaluate. In order to make the vision of the Standards come to fruition, educators are calling on the tools of technology to support and foster the shift to scientific inquiry or classroom research. The use of certain data analysis technologies have been suggested to be a particularly powerful ally in the struggle to extend classroom teaching and learning into the realm of problem-driven classroom inquiry. The use of a Geographic Information System (GIS), a technology allowing for the graphical representation of data with a geographic component seems to be one technology that can adequately bolster the dynamic and complex needs of the science classroom engaged in scientific inquiry. In this study, eighth grade Earth science students studying relative, local air quality indicators were divided in two groups; a treatment group that utilized GIS-supported scientific inquiry and a control group that used traditional mapping techniques to support their study. Student attitudes regarding science and technology were measured with a pre/post instrument across the study. Individual student efforts were summarily evaluated with a modified Kansas Science Performance Based Assessment rubric. During the two-week treatment, the students using the GIS-supported materials were found to show positive and significant improvements in science self-efficacy and attitudes toward technology. While female attitudes and self-efficacy were not found to change, males significantly improved on all affective factors. Students using GIS also performed significantly better than traditional mapping students on science process skills, specifically data analysis techniques

  3. The global positioning system and ArcGIS

    CERN Document Server

    Kennedy, Michael

    2009-01-01

    Foreword to the First EditionForeword to the Second EditionPreface for the Instructor, Third EditionAcknowledgmentsAbout the AuthorIntroductionChapter 1: Basic Concepts OverviewWhere Are You?What Time Is It?GPS and GISAnatomy of the Term ""Global Positioning System""How We Know Where Something IsStep-by-StepDisclaimerFirst OffDifferent Receivers and Different SoftwarePreparationProject 1AUnderstanding the Screens and ControlsProject 1BProject 1CChapter 2: Automated Data CollectionOverviewHow'd They Do That?How It Works: Measuring Distance by Measuring TimeFactors Affecting When and How to Coll

  4. A GIS-BASED MULTI-CRITERIA EVALUATION SYSTEM FOR SELECTION OF LANDFILL SITES: a case study from Abu Dhabi, United Arab Emirates

    Directory of Open Access Journals (Sweden)

    S. M. Issa

    2012-07-01

    Full Text Available Landfill sites receive 92% of total annual solid waste produced by municipalities in the emirate of Abu Dhabi. In this study, candidate sites for an appropriate landfill location for the Abu Dhabi municipal area are determined by integrating geographic information systems (GIS and multi-criteria evaluation (MCE analysis. To identify appropriate landfill sites, eight input map layers including proximity to urban areas, proximity to wells and water table depth, geology and topography, proximity to touristic and archeological sites, distance from roads network, distance from drainage networks, and land slope are used in constraint mapping. A final map was generated which identified potential areas showing suitability for the location of the landfill site. Results revealed that 30% of the study area was identified as highly suitable, 25% as suitable, and 45% as unsuitable. The selection of the final landfill site, however, requires further field research.

  5. Land cover mapping and GIS processing for the Savannah River Site Database

    International Nuclear Information System (INIS)

    Christel, L.M.; Guber, A.L.

    1994-07-01

    The Savannah River Site (SRS) is owned by the U.S. Department of Energy and operated by Westinghouse Savannah River Company. Located in Barnwell, Aiken, and Allendale counties in South Carolina, SRS covers an area of approximately 77,700 hectares. Land cover information for SRS was interpreted from color and color infrared aerial photography acquired between 1980 and 1989. The data were then used as the source of the land cover data layer for the SRS sitewide Geographic Information System database. This database provides SRS managers with recent land use information and has been successfully used to support cost-effective site characterization and reclamation

  6. Using Geographic Information Systems in science classrooms Usando o Sistema de Informação Geográfica (GIS em salas de aula de ciências

    Directory of Open Access Journals (Sweden)

    Diane Whitaker

    2011-06-01

    Full Text Available This qualitative study examines GIS use in two North Carolina classrooms and illustrates several GIS lessons that span the gamut of worksheet type lessons to independent student research. Using Geographic Information Systems, GIS, in the science classroom has a variety of benefits which the associated literature describes. The teachers in this study report that GIS is a technology that a wide range of students enjoy using. Visual learners find GIS a way to establish and communicate relationships that may be difficult for them to communicate with words and this makes their learning more enjoyable and rewarding. GIS use allows teachers to simplify many science concepts and again appeal to visual learners. Earthquake and volcano location relative to plate boundaries is a good example that is illustrated in a model lesson here. Additionally, GIS technologies allow students to practice and enhance their inquiry and problem solving skills. Students must select appropriate data layers, produce a map that communicates clearly to an audience, and calculate values like perimeter and area. GIS maps can be used to help students generate research questions and then answer those questions. An example student project is also included. GIS is a multi-faceted technology that is ready for use in the science curriculum.Este estudo qualitativo examina o uso do GIS em duas salas de aula da Carolina do Norte, EUA e ilustra uma gama de atividades realizadas para promover pesquisas independentes entre os estudantes. O uso do GIS na sala de aula de ciências possui vários benefícios descritos na literatura. Neste estudo os professores relataram que o GIS é uma tecnologia que os estudantes gostam de usar. Aprendizes visuais acham que o GIS é uma forma de estabelecer relações que podem ser difíceis de explicar com palavras, assim a aprendizagem deles é mais proveitosa e compensadora. O GIS permite ao professor simplificar muitos conceitos científicos. A localiza

  7. GIS in geoscience education- geomorphometric study

    Digital Repository Service at National Institute of Oceanography (India)

    Mahender, K.; Yogita, K.; Kunte, P.D.

    The educational institutions around the world have realised the possibility of using GIS in geosciences teaching along with in many other subjects. GIS is been used in a large number of geoscience applications viz. mapping, mineral and petroleum...

  8. Facility layout planning for educational systems: An application of fuzzy GIS and AHP

    Directory of Open Access Journals (Sweden)

    Hossein Ebrhaimzadeh Asmin

    2014-06-01

    Full Text Available One of the most important issues in urban planning programs is to allocate necessary spaces for educational applications. Selecting appropriate locations for training centers increases students' mental capabilities. Suitable location for the establishment of educational facilities is the first fundamental step for development of educational systems. The selection of optimal sites for educational facilities involves numerous parameters and it is essential to use multiple criteria decision making approaches to make wise decisions. This paper presents an empirical investigation on facility layout planning for educational systems in city of Birjand, Iran. Using fuzzy GIS as well as analytical hierarchy process (AHP, the study determines the most appropriate candidates for training centers.

  9. Design and optimization of a ground water monitoring system using GIS and multicriteria decision analysis

    Energy Technology Data Exchange (ETDEWEB)

    Dutta, D.; Gupta, A.D.; Ramnarong, V.

    1998-12-31

    A GIS-based methodology has been developed to design a ground water monitoring system and implemented for a selected area in Mae-Klong River Basin, Thailand. A multicriteria decision-making analysis has been performed to optimize the network system based on major criteria which govern the monitoring network design such as minimization of cost of construction, reduction of kriging standard deviations, etc. The methodology developed in this study is a new approach to designing monitoring networks which can be used for any site considering site-specific aspects. It makes it possible to choose the best monitoring network from various alternatives based on the prioritization of decision factors.

  10. GIS and remote sensing components of a spatial decision system in support of sustainable forest management

    Energy Technology Data Exchange (ETDEWEB)

    St-Onge, B.A.; Waaub, J.P.; Alleaume, S.; Couture, M. [Quebec Univ., Dept. of Geography, Montreal, PQ (Canada)

    1999-05-01

    The development of a tool used in decision making processes in forest management was discussed with special focus on two critical aspects of the decision aid system which pertain to spatial information. These are: (1) the use of up-to-date precise information, and (2) the accessibility of this information. This paper focuses on two approaches designed to provide accessible high quality information to the users of the decision aid system: i.e. the development of high resolution remote sensing methods, and a GIS data warehouse accessible over the Internet. 4 refs., 2 figs.

  11. Monitoring of dams according to German standard DIN 19 700 on the basis of a GIS based expert system; Stauanlagenueberwachung nach DIN 19 700 in Verbindung mit Expertensystemen auf GIS-Basis

    Energy Technology Data Exchange (ETDEWEB)

    Kast, Karl; Saucke, Ulrich; Elsaesser, Ralph [Dr.-Ing. Karl Kast + Partner (GbR) Ingenieurgemeinschaft fuer Umwelt- und Geotechnik, Ettlingen (Germany)

    2010-07-01

    The German standard DIN 19 700 stipulates regular safety reports assessing dams and their operation as part of the continuous dam monitoring scheme. Experience has shown that a GIS based dam monitoring system exhibits evident advantages regarding a continuous assessment. Besides and easy access to all relevant information grouped by themes, it offers a graphic analysis of measuring data and their display in the GIS system. In addition, concerning relevant failure mechanism, individual modules of a GIS based expert system are designed for the purpose of assessing the safety of the dam in the event of uncommon incidents. (orig.)

  12. Multimodale trafiknet i GIS (Multimodal Traffic Network in GIS)

    DEFF Research Database (Denmark)

    Kronbak, Jacob; Brems, Camilla Riff

    1996-01-01

    The report introduces the use of multi-modal traffic networks within a geographical Information System (GIS). The necessary theory of modelling multi-modal traffic network is reviewed and applied to the ARC/INFO GIS by an explorative example.......The report introduces the use of multi-modal traffic networks within a geographical Information System (GIS). The necessary theory of modelling multi-modal traffic network is reviewed and applied to the ARC/INFO GIS by an explorative example....

  13. Interactive Mapping on Virtual Terrain Models Using RIMS (Real-time, Interactive Mapping System)

    Science.gov (United States)

    Bernardin, T.; Cowgill, E.; Gold, R. D.; Hamann, B.; Kreylos, O.; Schmitt, A.

    2006-12-01

    Recent and ongoing space missions are yielding new multispectral data for the surfaces of Earth and other planets at unprecedented rates and spatial resolution. With their high spatial resolution and widespread coverage, these data have opened new frontiers in observational Earth and planetary science. But they have also precipitated an acute need for new analytical techniques. To address this problem, we have developed RIMS, a Real-time, Interactive Mapping System that allows scientists to visualize, interact with, and map directly on, three-dimensional (3D) displays of georeferenced texture data, such as multispectral satellite imagery, that is draped over a surface representation derived from digital elevation data. The system uses a quadtree-based multiresolution method to render in real time high-resolution (3 to 10 m/pixel) data over large (800 km by 800 km) spatial areas. It allows users to map inside this interactive environment by generating georeferenced and attributed vector-based elements that are draped over the topography. We explain the technique using 15 m ASTER stereo-data from Iraq, P.R. China, and other remote locations because our particular motivation is to develop a technique that permits the detailed (10 m to 1000 m) neotectonic mapping over large (100 km to 1000 km long) active fault systems that is needed to better understand active continental deformation on Earth. RIMS also includes a virtual geologic compass that allows users to fit a plane to geologic surfaces and thereby measure their orientations. It also includes tools that allow 3D surface reconstruction of deformed and partially eroded surfaces such as folded bedding planes. These georeferenced map and measurement data can be exported to, or imported from, a standard GIS (geographic information systems) file format. Our interactive, 3D visualization and analysis system is designed for those who study planetary surfaces, including neotectonic geologists, geomorphologists, marine

  14. Mapping biological systems to network systems

    CERN Document Server

    Rathore, Heena

    2016-01-01

    The book presents the challenges inherent in the paradigm shift of network systems from static to highly dynamic distributed systems – it proposes solutions that the symbiotic nature of biological systems can provide into altering networking systems to adapt to these changes. The author discuss how biological systems – which have the inherent capabilities of evolving, self-organizing, self-repairing and flourishing with time – are inspiring researchers to take opportunities from the biology domain and map them with the problems faced in network domain. The book revolves around the central idea of bio-inspired systems -- it begins by exploring why biology and computer network research are such a natural match. This is followed by presenting a broad overview of biologically inspired research in network systems -- it is classified by the biological field that inspired each topic and by the area of networking in which that topic lies. Each case elucidates how biological concepts have been most successfully ...

  15. Map projections cartographic information systems

    CERN Document Server

    Grafarend, Erik W; Syffus, Rainer

    2014-01-01

    This book offers a timely review of map projections including sphere, ellipsoid, rotational surfaces, and geodetic datum transformations. Coverage includes computer vision, and remote sensing space projective mappings in photogrammetry.

  16. The Coastal Area Development Using GIS (Review of GIS Application Models

    Directory of Open Access Journals (Sweden)

    Prastowo Sutanto

    2004-01-01

    Full Text Available GIS, Geographical Information System, is a means that an be used to plan and to develop the coastal area because in carrying out the analysis this system combines the space data and their  attributes. The activities done among others the prototype development of algae cultivation and tourism ativities, the development of fish pond location, the reclamation of the Jakarta Bay, and the concept of development the floating “Keramba” for pearl oysters and white sea fish similar to sole. GIS analysis with heaviness and overlay mapping yields the appropriate map to plan and to develop the coastal area. The result of GIS analysis can be used to plan and to develop the coastal area.

  17. Application of GIS to assess rainfall variability impacts on crop yield ...

    African Journals Online (AJOL)

    Sahara Africa. Hence, this study aim at examines and map spatio-temporal impacts of rainfall variability on water availability for maize yield using Geographic Information System (GIS). Major regions where maize is highly produced in Nigeria were ...

  18. Regional mapping for evaluation of energetic alternatives for isolated systems in the Amazon region: the Brazilian state of Amapa

    International Nuclear Information System (INIS)

    Nascimento, Marcos V.G.; Pires, Silvia Helena M.; Lacorte, Ana Castro; Menezes, Paulo Cesar P.; Guimaraes, Ana Paula C.; Santos, Marco Aurelio dos; Nascimento, Jose A.S.; Borges, Jorge Luiz; La Rovere, Emilio

    1999-01-01

    This paper presents the methodology developed for the characterization of regional energy potentials, and evaluation of the utilization viability of the various alternative electric power generation, by using the analysis technology based on Geographic Information Systems (GIS). The paper also presents the first results obtained for the energy mapping of the State of Amapa, Brazil

  19. DEVELOPING GIS-BASED DEMAND-RESPONSIVE TRANSIT SYSTEM IN TEHRAN CITY

    Directory of Open Access Journals (Sweden)

    H. Faroqi

    2015-12-01

    Full Text Available Create, maintain and development of public transport network in metropolitan are important problems in the field of urban transport management. In public transport, maximize the efficient use of public fleet capacity has been considered. Concepts and technologies of GIS have provided suitable way for management and optimization of the public transports systems. In demand-responsive public transportation system, firstly fellow traveller groups have been established for applicants based on spatial concepts and tools of GIS, second for each group according to its’ members and their paths, a public vehicle has been allocated to them then based on dynamic routing, the fellow passenger group has been gathered from their origins and has been moved to their destinations through optimal route. The suggested system has been implemented based on network data and commuting trips statistics of 1 to 6 districts in Tehran city. Evaluation performed on the results show the 34% increase using of Taxi capacity, 13% increase using of Van capacity and 10% increase using of Bus capacity in comparison between current public transport system and suggested public transportation system has been improved.

  20. Integrated outage management: Leveraging utility system assets including GIS and AMR for optimum outage response

    Energy Technology Data Exchange (ETDEWEB)

    Finamore, E. P.

    2004-02-01

    The control of electrical system outages is discussed. The principal argument advanced is that traditional stand-alone methods of outage response will no longer get the job done without utility companies integrating their outage management systems with other system assets such as GIS (geographic information system) and AMR (advanced metering systems). Many meter reading systems, while primarily supporting customer billing, can also provide outage alarm and some are also capable of service restoration notification, which is an invaluable benefit to service operators since it obviates the need for verifying system restoration by labour-intensive on-site visits or customer call-backs. If successfully leveraged, optimization of all utility assets and improvements in labour productivity can results in improved outage management performance gains without affecting performance in other areas.

  1. Enhancement of a Virtual Geology Field Guide of Georgia Initiative Using Gigapan© and ArcGIS Online's Story Map

    Science.gov (United States)

    Mobasher, K.; Turk, H. J.; Witherspoon, W.; Tate, L.; Hoynes, J.

    2015-12-01

    A GIS geology geodatabase of Georgia was developed using ArcGIS 10.2. The geodatabase for each physiographic provinces of Georgia contains fields designed to store information regarding geologic features. Using ArcGIS online, the virtual field guide is created which provides an interactive learning experience for students to allow in real time photography, description, mapping and sharing their observations with the instructor and peers. Gigapan© facilitates visualizing geologic features at different scales with high resolutions and in their larger surrounding context. The classroom applications of the Gigapan© are limitless when teaching students the entire range of geologic structures from showcasing crystalline structures of minerals to understanding the geological processes responsible for formation of an entire mountain range. The addition of the Story Map enhances the virtual experience when you want to present a geo-located story point narrative featuring images or videos. The virtual field component and supplementary Gigapan© imagery coupled with Story Map added significantly to the detailed realism of virtual field guide further allowing students to more fully understand geological concepts at various scales. These technologies peaked students interest and facilitated their learning and preparation to function more effectively in the geosciences by developing better observations and new skills. These technologies facilitated increased student engagement in the geosciences by sharing, enhancing and transferring lecture information to actual field knowledge and experiences. This enhanced interactive learning experience not only begins to allow students to understand and recognize geologic features in the field but also increased their collaboration, enthusiasm and interest in the discipline. The increased interest and collaboration occurred as students assisted in populating a geologic geodatabase of Georgia.

  2. WebEQ: a web-GIS System to collect, display and query data for the management of the earthquake emergency in Central Italy

    Science.gov (United States)

    Carbone, Gianluca; Cosentino, Giuseppe; Pennica, Francesco; Moscatelli, Massimiliano; Stigliano, Francesco

    2017-04-01

    After the strong earthquakes that hit central Italy in recent months, the Center for Seismic Microzonation and its applications (CentroMS) was commissioned by the Italian Department of Civil Protection to conduct the study of seismic microzonation of the territories affected by the earthquake of August 24, 2016. As part of the activities of microzonation, IGAG CNR has created WebEQ, a management tool of the data that have been acquired by all participants (i.e., more than twenty research institutes and university departments). The data collection was organized and divided into sub-areas, assigned to working groups with multidisciplinary expertise in geology, geophysics and engineering. WebEQ is a web-GIS System that helps all the subjects involved in the data collection activities, through tools aimed at data uploading and validation, and with a simple GIS interface to display, query and download geographic data. WebEQ is contributing to the creation of a large database containing geographical data, both vector and raster, from various sources and types: - Regional Technical Map em Geological and geomorphological maps em Data location maps em Maps of microzones homogeneous in seismic perspective and seismic microzonation maps em National strong motion network location. Data loading is done through simple input masks that ensure consistency with the database structure, avoiding possible errors and helping users to interact with the map through user-friendly tools. All the data are thematized through standardized symbologies and colors (Gruppo di lavoro MS 2008), in order to allow the easy interpretation by all users. The data download tools allow data exchange between working groups and the scientific community to benefit from the activities. The seismic microzonation activities are still ongoing. WebEQ is enabling easy management of large amounts of data and will form a basis for the development of tools for the management of the upcoming seismic emergencies.

  3. Qu'Appelle River Dam, dam break analysis using advanced GIS tools for rapid modelling and inundation mapping

    Energy Technology Data Exchange (ETDEWEB)

    Bonin, D. [Hatch Energy, Winnipeg, MB (Canada); Campbell, C. [Saskatchewan Watershed Authority, Moose Jaw, SK (Canada); Groeneveld, J. [Hatch Energy, Calgary, AB (Canada)

    2008-07-01

    The South Saskatchewan River Project (SSRP) comprises a multi-purpose reservoir that provides water for conservation and irrigation, flood control, power generation, recreation, and municipal and industrial water supply. In addition to the 64 m high Gardiner Dam, the 27 m high Qu'Appelle River Dam and the 22 km long Lake Diefenbaker Reservoir, the SSRP also includes ancillary works. The Qu'Appelle River valley extends for 458 km before connecting to the Assiniboine River. The valley is incised up to 90 m in depth and is a popular cottaging and recreational area with several major communities located in the flood plain. In the event of a breach of the Qu'Appelle Dam, the discharge will increase from a normal maximum discharge of under 60 m{sup 3} per second to over 50,000 m{sup 3} per second. The Saskatchewan Watershed Authority (SWA) is responsible for ensuring safe development of the Province's water resources, without affecting reservoir or lake operations, and preventing damage from flooding, erosion or land slides. It is in the process of developing Hazard Assessments and emergency preparedness plans for each of their dams in accordance with the Canadian Dam Safety Guidelines. Studies using GIS technology and the hydrodynamic routing model HEC-RAS have been completed to evaluate the potential inundation that may result in the event of failure of the Qu'Appelle River Dam. These studies involved the development of a breach parameter model using a breach data set revised to better reflect the Qu'Appelle River Dam; the development of a dam break model for the Qu'Appelle River Dam and downstream river and flood plain; and, the use of this model to simulate two potential dam failure scenarios for the Qu'Appelle River Dam, notably failure during passage of the PMF and failure during fair weather conditions. Inundation maps have been prepared for the downstream Qu'Appelle River valley for each of the above events. 3 refs., 4

  4. GIS Based System for Post-Earthquake Crisis Managment Using Cellular Network

    Science.gov (United States)

    Raeesi, M.; Sadeghi-Niaraki, A.

    2013-09-01

    Earthquakes are among the most destructive natural disasters. Earthquakes happen mainly near the edges of tectonic plates, but they may happen just about anywhere. Earthquakes cannot be predicted. Quick response after disasters, like earthquake, decreases loss of life and costs. Massive earthquakes often cause structures to collapse, trapping victims under dense rubble for long periods of time. After the earthquake and destroyed some areas, several teams are sent to find the location of the destroyed areas. The search and rescue phase usually is maintained for many days. Time reduction for surviving people is very important. A Geographical Information System (GIS) can be used for decreasing response time and management in critical situations. Position estimation in short period of time time is important. This paper proposes a GIS based system for post-earthquake disaster management solution. This system relies on several mobile positioning methods such as cell-ID and TA method, signal strength method, angel of arrival method, time of arrival method and time difference of arrival method. For quick positioning, the system can be helped by any person who has a mobile device. After positioning and specifying the critical points, the points are sent to a central site for managing the procedure of quick response for helping. This solution establishes a quick way to manage the post-earthquake crisis.

  5. GIS BASED SYSTEM FOR POST-EARTHQUAKE CRISIS MANAGMENT USING CELLULAR NETWORK

    Directory of Open Access Journals (Sweden)

    M. Raeesi

    2013-09-01

    Full Text Available Earthquakes are among the most destructive natural disasters. Earthquakes happen mainly near the edges of tectonic plates, but they may happen just about anywhere. Earthquakes cannot be predicted. Quick response after disasters, like earthquake, decreases loss of life and costs. Massive earthquakes often cause structures to collapse, trapping victims under dense rubble for long periods of time. After the earthquake and destroyed some areas, several teams are sent to find the location of the destroyed areas. The search and rescue phase usually is maintained for many days. Time reduction for surviving people is very important. A Geographical Information System (GIS can be used for decreasing response time and management in critical situations. Position estimation in short period of time time is important. This paper proposes a GIS based system for post–earthquake disaster management solution. This system relies on several mobile positioning methods such as cell-ID and TA method, signal strength method, angel of arrival method, time of arrival method and time difference of arrival method. For quick positioning, the system can be helped by any person who has a mobile device. After positioning and specifying the critical points, the points are sent to a central site for managing the procedure of quick response for helping. This solution establishes a quick way to manage the post–earthquake crisis.

  6. A WebGIS-based command control system for forest fire fighting

    Science.gov (United States)

    Yang, Jianyu; Ming, Dongping; Zhang, Xiaodong; Huang, Haitao

    2006-10-01

    Forest is a finite resource and fire prevention is crucial work. However, once a forest fire or accident occurs, timely and effective fire-fighting is the only necessary measure. The aim of this research is to build a computerized command control system based on WEBGIS to direct fire-fighting. Firstly, this paper introduces the total technique flow and functional modules of the system. Secondly, this paper analyses the key techniques for building the system, and they are data obtaining, data organizing & management, architecture of WebGIS and sharing & interoperation technique. In the end, this paper demonstrates the on line martial symbol editing function to show the running result of system. The practical application of this system showed that it played very important role in the forest fire fighting work. In addition, this paper proposes some strategic recommendations for the further development of the system.

  7. COSMO-SkyMed and GIS applications

    Science.gov (United States)

    Milillo, Pietro; Sole, Aurelia; Serio, Carmine

    2013-04-01

    Geographic Information Systems (GIS) and Remote Sensing have become key technology tools for the collection, storage and analysis of spatially referenced data. Industries that utilise these spatial technologies include agriculture, forestry, mining, market research as well as the environmental analysis . Synthetic Aperture Radar (SAR) is a coherent active sensor operating in the microwave band which exploits relative motion between antenna and target in order to obtain a finer spatial resolution in the flight direction exploiting the Doppler effect. SAR have wide applications in Remote Sensing such as cartography, surface deformation detection, forest cover mapping, urban planning, disasters monitoring , surveillance etc… The utilization of satellite remote sensing and GIS technology for this applications has proven to be a powerful and effective tool for environmental monitoring. Remote sensing techniques are often less costly and time-consuming for large geographic areas compared to conventional methods, moreover GIS technology provides a flexible environment for, analyzing and displaying digital data from various sources necessary for classification, change detection and database development. The aim of this work si to illustrate the potential of COSMO-SkyMed data and SAR applications in a GIS environment, in particular a demostration of the operational use of COSMO-SkyMed SAR data and GIS in real cases will be provided for what concern DEM validation, river basin estimation, flood mapping and landslide monitoring.

  8. Zoning of Isfahan Drinking Water Distribution Network Corrosion Potential in Summer and Autumn of 2011 Using Geographic Information System (GIS

    Directory of Open Access Journals (Sweden)

    Fatemeh Setayesh

    2014-07-01

    Full Text Available This cross-sectional study has been conducted to determine the corrosion potential of water in Isfahan drinking water distribution system in 2011. Eighty samples during summer and fall 2011(40 samples for each season were collected from different parts of the Isfahan drinking water distribution system. The temperature, calcium hardness, alkalinity, total dissolved solids, and pH were measured. Values of Langelier, Ryznar, Corrosiveness, and Puckorius indexes were calculated. Zoning maps were prepared using ArcGIS 9.3 software. The calculated mean values of Langelier, Ryznar, Corrosiveness, and Puckorius indexes in the summer and fall were (-0.52, 8.83, 10.37, 10.84 and (-0.71, 9.27, 10.94, 10.88, respectively. These results indicated that the Isfahan drinking water based on Langelier, Ryznar, and Puckorius indexes had a corrosive tendency and based on aggressiveness index had a moderate corrosivity potential. The corrosiveness of water may be as a basis for gradual deterioration of water distribution and transmission pipeline systems or as a route for contaminant entrance and finally can cause unhealthy impacts. Therefore, remedial measures are necessary to corrosion control of Isfahan drinking water

  9. GIS-based site selection methodology for hybrid renewable energy systems: A case study from western Turkey

    International Nuclear Information System (INIS)

    Aydin, Nazli Yonca; Kentel, Elcin; Sebnem Duzgun, H.

    2013-01-01

    separately for wind and solar energy systems by using Geographic Information System (GIS) and finally associated maps are overlaid to obtain the most feasible locations for hybrid wind solar–PV systems

  10. Development and Application of a Planning Support System for Regional Spatial Functional Zoning Based on GIS

    Directory of Open Access Journals (Sweden)

    Xiaorui Zhang

    2016-09-01

    Full Text Available Regional spatial functional zoning in China is a large-scale strategic planning and requires very advanced planning decision support technology. With respect to spatial functional zoning, the planning support system (PSS is introduced as one of the most popular computer aided planning systems at the present time in this paper, and is further explained with the example of the latest regional main functional area (RMFA planning in China. On the Visual Studio.NET visualization development platform, the planning decision model, planning decision method, and GIS are organically integrated and customized by using the component-type secondary development technology of the ArcGIS Engine with the development language VB.NET. Hence, a highly efficient and flexible planning support system of regional main functional areas (RMFA-PSS is established. It was adopted in the research of the Beijing–Tianjin area in China and accordingly two types of main functional area planning are acquired. The RMFA-PSS offers an efficient and flexible decision support with regard to RMFA planning. The research can provide a reference for further PSS development and applications related to other types of spatial functional zoning.

  11. GIS-based spatial decision support system for grain logistics management

    Science.gov (United States)

    Zhen, Tong; Ge, Hongyi; Jiang, Yuying; Che, Yi

    2010-07-01

    Grain logistics is the important component of the social logistics, which can be attributed to frequent circulation and the great quantity. At present time, there is no modern grain logistics distribution management system, and the logistics cost is the high. Geographic Information Systems (GIS) have been widely used for spatial data manipulation and model operations and provide effective decision support through its spatial database management capabilities and cartographic visualization. In the present paper, a spatial decision support system (SDSS) is proposed to support policy makers and to reduce the cost of grain logistics. The system is composed of two major components: grain logistics goods tracking model and vehicle routing problem optimization model and also allows incorporation of data coming from external sources. The proposed system is an effective tool to manage grain logistics in order to increase the speed of grain logistics and reduce the grain circulation cost.

  12. Soil maps, field knowledge, forest inventory and Ecological-Economic Zoning as a basis for agricultural suitability of lands in Minas Gerais elaborated in GIS

    Directory of Open Access Journals (Sweden)

    Vladimir Antonio Silva

    2013-12-01

    Full Text Available Lands (broader concept than soils, including all elements of the environment: soils, geology, topography, climate, water resources, flora and fauna, and the effects of anthropogenic activities of the state of Minas Gerais are in different soil, climate and socio-economics conditions and suitability for the production of agricultural goods is therefore distinct and mapping of agricultural suitability of the state lands is crucial for planning guided sustainability. Geoprocessing uses geographic information treatment techniques and GIS allows to evaluate geographic phenomena and their interrelationships using digital maps. To evaluate the agricultural suitability of state lands, we used soil maps, field knowledge, forest inventories and databases related to Ecological-Economic Zoning (EEZ of Minas Gerais, to develop a map of land suitability in GIS. To do this, we have combined the maps of soil fertility, water stress, oxygen deficiency, vulnerability to erosion and impediments to mechanization. In terms of geographical expression, the main limiting factor of lands is soil fertility, followed by lack of water, impediments to mechanization and vulnerability to erosion. Regarding agricultural suitability, the group 2 (regular suitability for crops is the most comprehensive, representing 45.13% of the state. For management levels A and B, low and moderate technological level, respectively, the most expressive suitability class is the regular, followed by the restricted class and last, the adequate class, while for the management level C (high technological level the predominant class is the restricted. The predominant most intensive use type is for crops, whose area increases substantially with capital investment and technology (management levels B and C.

  13. Epidemiologic Investigation of Dysentery in North of Iran: Use of Geographic Information System (GIS)

    Science.gov (United States)

    Nadi, Aliasghar; Abedi, Ghassem; Isazadeh, Khatoon; Rostami, Farideh; Siamian, Hasan; Hosseini, Mahbobeh; Asadi-Aliabadi, Mehran

    2016-01-01

    Introduction: Dysentery is an intestinal inflammation which is created by the microorganisms attacking intestine mucus. Knowing the prevalence of this disease in different societies paves the way for programming and providing treatment and preventive measures. The main purpose of this study is to investigate the epidemiologic pattern and geographical distribution of dysentery based on GIS. Method: This was a cross-sectional and analytical study. The dysentery cases were gathered from the section of contagious diseases in health chancellery of Mazandaran University of medical sciences through a checklist during the years 2008 to 2013. In order to analyze the data, we made use of chi-square test. Then, the GIS software was used to recognize the geographical distribution of the disease. Findings: There was reported about 653 cases affected by dysentery and the disease proportion was equal for both men and women. Most of the persons with dysentery was city dwellers. The highest rate of incidents was reported to be in Fereidunkenar in 2011, and the disease was mostly found among farmers, students, and college students. Conclusion: Since dysentery is a disease transmitted from water and food, and in this study, it was found out that the disease sources included using polluted water, vegetables, and lack of appropriate personal hygiene. Therefore, it is essential to take into consideration the health issues. Moreover, the suitable conditions of the geographical area which has the highest rate of incident have paved the way for dysentery occurrence. In addition, using geographic information system (GIS) as a visual instrument can help the stakeholders and officials to elaborate on the death trend and recognize the areas for optimal use of the available resources. PMID:28144197

  14. The role of GIS and remote sensing in land degradation assessment and conservation mapping: some user experiences and expectations

    NARCIS (Netherlands)

    Lynden, van G.W.J.; Mantel, S.

    2001-01-01

    Planning strategies for sustainable land management require solid base line data on natural resources (soils, physiography, climate, vegetation, land use, etc.) and on socio-economic aspects. GIS and remote sensing have an important role in linkage and analysis of such data, in particular for

  15. Study on the complex network characteristics of urban road system based on GIS

    Science.gov (United States)

    Gao, Zhonghua; Chen, Zhenjie; Liu, Yongxue; Huang, Kang

    2007-06-01

    Urban road system is the basic bone of urban transportation and one of the most important factors that influent and controls the urban configuration. In this paper, an approach of modeling, analyzing and optimizing urban road system is described based on complex network theory and GIS technology. The urban road system is studied on three focuses: building the urban road network, modeling the computational procedures based on urban road networks and analyzing the urban road system of Changzhou City as the study case. The conclusion is that the urban road network is a scale-free network with small-world characteristic, and there is still space for development of the whole network as a small-world network, also the key road crosses should be kept expedite.

  16. Evaluation of heavy metals level (arsenic, nickel, mercury and lead effecting on health in drinking water resource of Kohgiluyeh county using geographic information system (GIS

    Directory of Open Access Journals (Sweden)

    Abdolazim Alinejad

    2016-08-01

    Full Text Available This study was conducted to determine the amount of heavy metals (Arsenic, Nickel, Mercury, and Lead in drinking water resource of Kohgiluyeh County using Geographic Information System (GIS. This cross-sectional study was conducted on drinking water resource of Kohgiluyeh County (33 water supplies and 4 heavy metals in 2013. 264 samples were analyzed in this study. The experiments were performed at the laboratory of Water and Wastewater Company based on Standard Method. The Atomic Adsorption was used to evaluate the amount of heavy metals. The results were mapping by Geographic Information System software (GIS 9.3 after processing of parameters. Finally, the data were analyzed by SPSS 16 and Excel 2007. The maximum amount of each heavy metal and its resource were shown as follow: Nickel or Ni (Source of w12, 124ppb, Arsenic or As (w33, 42 ppb, Mercury or Hg (w22 and w30, 96ppb, Lead or Pb (w21, 1553ppb. Also, the GIS maps showed that Lead in the central region was very high, Mercury and Arsenic in the northern region were high and Nickel in the eastern and western regions was high. The Kriging method and Gauss model were introduced as best method for interpolation of these metals. Since the concentration of these heavy metals was higher than standard levels in most drinking water supplies in Kohgiluyeh County and these high levels of heavy metals can cause the adverse effects on human health; therefore, the environmental and geological studies are necessary to identify the pollution resource and elimination and removal of heavy metals

  17. STUDY NOISE POLLUTION TYUMEN USING GIS

    Directory of Open Access Journals (Sweden)

    V. A. Dobryakova

    2016-01-01

    Full Text Available One of the most harmful factors of environment of the city is the noise, and its weight among the factors adversely affecting the life and health of the population has been increasing steadily [Sheina and etc., 2007; Polovinkina and etc., 2012]. Today, most major cities of the Russian Federation (70% have a high noise pollution problem. The system of support for the monitoring and control of acoustic situation in the city can be considered noise pollution electronic cards made using geographic information systems (GIS. There are two fundamentally different approaches to the selection of software for creation of noise maps. According to the first of them, use universal multifunctional complexes GIS (ArcGIS, MapInfo. According to the distribution of data points on the noise characteristics is created TIN model. A second approach to create noise maps using highly specialized software (MapNoise, SoundPLAN, Mitha, Cadna, ExNOISE et al.. To calculate noise propagation area is divided on the grid with a certain step, the most relevant mapping purposes. Calculation of noise levels is carried out in a grid cell by measurements based on diffraction and reflection of sound barriers and absorbing underlying surface. Noise pollution is also displayed using contour lines.

  18. Dynamics of Open Systems with Affine Maps

    International Nuclear Information System (INIS)

    Zhang Da-Jian; Liu Chong-Long; Tong Dian-Min

    2015-01-01

    Many quantum systems of interest are initially correlated with their environments and the reduced dynamics of open systems are an interesting while challenging topic. Affine maps, as an extension of completely positive maps, are a useful tool to describe the reduced dynamics of open systems with initial correlations. However, it is unclear what kind of initial state shares an affine map. In this study, we give a sufficient condition of initial states, in which the reduced dynamics can always be described by an affine map. Our result shows that if the initial states of the combined system constitute a convex set, and if the correspondence between the initial states of the open system and those of the combined system, defined by taking the partial trace, is a bijection, then the reduced dynamics of the open system can be described by an affine map. (paper)

  19. Mapping Social Ecological Systems Archetypes

    Science.gov (United States)

    Rocha, J. C.; Malmborg, K.; Gordon, L.

    2016-12-01

    Achieving sustainable development goals requires targeting and monitoring sustainable solutions tailored to different social and ecological contexts. Elinor Ostrom stressed that there is no panaceas or universal solutions to environmental problems, and developed a social-ecological systems' (SES) framework -a nested multi tier set of variables- to help diagnose problems, identify complex interactions, and solutions tailored to each SES arena. However, to our knowledge, the SES framework has only been applied to over a hundred cases, and typically reflect the analysis of local case studies with relatively small coverage in space and time. While case studies are context rich and necessary, their conclusions might not reach policy making instances. Here we develop a data driven method for upscaling Ostrom's SES framework and applied to a context where we expect data is scarce, incomplete, but also where sustainable solutions are badly needed. The purpose of upscaling the framework is to create a tool that facilitates decision making on data scarce environments such as developing countries. We mapped SES by applying the SES framework to poverty alleviation and food security issues in the Volta River basin in Ghana and Burkina Faso. We found archetypical configurations of SES in space given data availability, we study their change over time, and discuss where agricultural innovations such as water reservoirs might have a stronger impact at increasing food security and therefore alleviating poverty and hunger. We conclude outlining how the method can be used in other SES comparative studies.

  20. A GIS-based decision support system for regional eco-security assessment and its application on the Tibetan Plateau.

    Science.gov (United States)

    Xiaodan, Wang; Xianghao, Zhong; Pan, Gao

    2010-10-01

    Regional eco-security assessment is an intricate, challenging task. In previous studies, the integration of eco-environmental models and geographical information systems (GIS) usually takes two approaches: loose coupling and tight coupling. However, the present study used a full coupling approach to develop a GIS-based regional eco-security assessment decision support system (ESDSS). This was achieved by merging the pressure-state-response (PSR) model and the analytic hierarchy process (AHP) into ArcGIS 9 as a dynamic link library (DLL) using ArcObjects in ArcGIS and Visual Basic for Applications. Such an approach makes it easy to capitalize on the GIS visualization and spatial analysis functions, thereby significantly supporting the dynamic estimation of regional eco-security. A case study is presented for the Tibetan Plateau, known as the world's "third pole" after the Arctic and Antarctic. Results verified the usefulness and feasibility of the developed method. As a useful tool, the ESDSS can also help local managers to make scientifically-based and effective decisions about Tibetan eco-environmental protection and land use. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  1. Search and selection hotel system in Surabaya based on geographic information system (GIS) with fuzzy logic

    Science.gov (United States)

    Purbandini, Taufik

    2016-03-01

    Surabaya is a metropolitan city in Indonesia. When the visitor has an interest in Surabaya for several days, then the visitor was looking for lodging that is closest to the interests of making it more efficient and practical. It was not a waste of time for the businessman because of congestion and so we need full information about the hotel as an inn during a stay in Surabaya began name, address of the hotel, the hotel's website, the distance from the hotel to the destination until the display of the map along the route with the help of Google Maps. This system was designed using fuzzy logic which aims to assist the user in making decisions. Design of hotel search and selection system was done through four stages. The first phase was the collection of data and as the factors that influence the decision-making along with the limit values of these factors. Factors that influence covers a distance of the hotel, the price of hotel rooms, and hotel reviews. The second stage was the processing of data and information by creating membership functions. The third stage was the analysis of systems with fuzzy logic. The steps were performed in systems analysis, namely fuzzification, inference using Mamdani, and defuzzification. The last stage was the design and construction of the system. Designing the system using use case diagrams and activity diagram to describe any process that occurs. Development system includes system implementation and evaluation systems. Implementation of mobile with Android-based system so that these applications were user friendly.

  2. Coordinate systems and map projections

    CERN Document Server

    Maling, DH

    1992-01-01

    A revised and expanded new edition of the definitive English work on map projections. The revisions take into account the huge advances in geometrical geodesy which have occurred since the early years of satellite geodesy. The detailed configuration of the geoid resulting from the GEOS and SEASAT altimetry measurements are now taken into consideration. Additionally, the chapter on computation of map projections is updated bearing in mind the availability of pocket calculators and microcomputers. Analytical derivation of some map projections including examples of pseudocylindrical and polyconic

  3. A 3D visible evaluation of landslide risk degree under integration of GIS and artificial intelligence

    Institute of Scientific and Technical Information of China (English)

    QIAO; Jianping; ZHU; Axing; CHEN; Yongbo; WANG; Rongxun

    2003-01-01

    Artificial intelligence has been used to obtain background factors (basic environmental factors) from landslide specialists. A 3D visible evaluation map may be charted by fuzzy evaluation, and the traditional plane map may be decoded into a 3D map by using factor weight from specialists system and technology of RS and GIS for quantitative sampling of these factors.

  4. Primena GIS-a u hidrološkim istraživanjima - primer reke Lepenice

    Directory of Open Access Journals (Sweden)

    Milanović Ana

    2007-01-01

    Full Text Available The basic component of GIS technology (Geographical Information Systems is the base of graphical data, which can be used for geographical definition of spaces elements- entities. As a new, modern, technology, it has more application in different hydrological researches. In GIS creation Lepenica river basin, it was applied softwares: Micro Station, GeoMedia, Surfer 7. Map and AutoCAD. After data base creation, it was enabled for users to get different information of Lepenica river basin on the simple way. Getting data are used for creation of three thematic maps (altitude zones map, hydrographical net map and precipitation isoline map.

  5. A GIS-based 3D online information system for underground energy storage in northern Germany

    Science.gov (United States)

    Nolde, Michael; Malte, Schwanebeck; Ehsan, Biniyaz; Rainer, Duttmann

    2015-04-01

    We would like to present the concept and current state of development of a GIS-based 3D online information system for underground energy storage. Its aim is to support the local authorities through pre-selection of possible sites for thermal, electrical and substantial underground energy storages. Since the extension of renewable energies has become legal requirement in Germany, the underground storing of superfluously produced green energy (such as during a heavy wind event) in the form of compressed air, gas or heated water has become increasingly important. However, the selection of suitable sites is a complex task. The presented information system uses data of geological features such as rock layers, salt domes and faults enriched with attribute data such as rock porosity and permeability. This information is combined with surface data of the existing energy infrastructure, such as locations of wind and biogas stations, powerline arrangement and cable capacity, and energy distribution stations. Furthermore, legal obligations such as protected areas on the surface and current underground mining permissions are used for the process of pre-selecting sites suitable for energy storage. Not only the current situation but also prospective scenarios, such as expected growth in produced amount of energy are incorporated in the system. While the process of pre-selection itself is completely automated, the user has full control of the weighting of the different factors via the web interface. The system is implemented as an online 3D server GIS environment, so that it can easily be utilized in any web browser. The results are visualized online as interactive 3d graphics. The information system is implemented in the Python programming language in combination with current Web standards, and is build using only free and open source software. It is being developed at Kiel University as part of the ANGUS+ project (lead by Prof. Sebastian Bauer) for the federal state of

  6. An overview of a GIS method for mapping landslides and assessing landslide hazards at Río El Estado watershed, on the SW flank of Pico de Orizaba Volcano, Mexico

    Science.gov (United States)

    Legorreta Paulin, G.; Bursik, M. I.; Contreras, T.; Polenz, M.; Ramírez Herrera, M.; Paredes Mejía, L.; Arana Salinas, L.

    2012-12-01

    This poster provides an overview of the on-going research project (Grant SEP-CONACYT no 167495) from the Institute of Geography at the National Autonomous University of Mexico (UNAM) that seeks to conduct a multi-temporal landslide inventory, produce a landslide susceptibility map, and estimate sediment production by using Geographic Information Systems (GIS). The Río El Estado watershed on the southwestern flank of Pico de Orizaba volcano, the highest mountain in Mexico, is selected as a study area. The catchment covers 5.2 km2 with elevations ranging from 2676.79 to 4248.2 m a.s.l. and hillslopes between 0° and 56°. The stream system of Río El Estado catchment erodes Tertiary and Quaternary lavas, pyroclastic flows, and fall deposits. The geologic and geomorphologic factors in combination with high seasonal precipitation, high degree of weathering, and steep slopes predispose the study area to landslides. The methodology encompasses three main stages of analysis to assess landslide hazards: Stage 1 builds a historic landslide inventory. In the study area, an inventory of more than 170 landslides is created from multi-temporal aerial-photo-interpretation and local field surveys to assess landslide distribution. All landslides were digitized into a geographic information system (GIS), and a spatial geo-database of landslides was constructed from standardized GIS datasets. Stage 2 Calculates the susceptibility for the watershed. During this stage, Multiple Logistic Regression and SINMAP) will be evaluated to select the one that provides scientific accuracy, technical accessibility, and applicability. Stage 3 Estimate the potential total material delivered to the main stream drainage channel by all landslides in the catchment. Detailed geometric measurements of individual landslides visited during the field work will be carried out to obtain the landslide area and volume. These measurements revealed an empirical relationship between area and volume that took the

  7. Analysis of open source GIS software

    OpenAIRE

    Božnis, Andrius

    2006-01-01

    GIS is one of the most perspective information technology sciences sphere. GIS conjuncts the digital image analysis and data base systems. This makes GIS wide applicable and very high skills demanding system. There is a lot of commercial GIS software which is well advertised and which functionality is pretty well known, while open source software is forgotten. In this diploma work is made analysis of available open source GIS software on the Internet, in the scope of different projects interr...

  8. Geographic Information Systems and geomorphological mapping applied to landslide inventory and susceptibility mapping in El Estado river, Pico de Orizaba, Mexico

    Directory of Open Access Journals (Sweden)

    José Fernando Aceves Quesada

    2016-11-01

    Full Text Available With the aim of raising awareness on the prevention of landslide disasters, this work develops a methodology that incorporates geomorphological mapping into the mapping of landslide susceptibility using Geographic Information Systems (GIS and Multiple Logistic Regression (MLR. In Mexico, some studies have evaluated the stability of hillsides using GIS. However, these studies set a general framework and guidance (that includes basic concepts and explanations of landslide classification, triggering mechanisms, criteria, considerations, and analysis for landslide hazard reconnaissance, etc. for preparing a landslide atlas at state and city levels. So far, these have not developed a practical and standardized approach incorporating geomorphological maps into the landslide inventory using GIS. This paper describes the analysis conducted to develop an analytical technique and morphometric analysis for a multi-temporal landslide inventory. Three data management levels are used to create GIS thematic layers. For the first level, analogue topographic, geological, land-use, and climate paper are converted to raster format, georeferenced, and incorporated as GIS thematic layers. For the second level, five layers are derived from topographic elevation data: slope angles, slope curvature, contributing area, flow direction, and saturation. For the third level, thematic maps are derived from the previous two levels of data: a hypsometric map (heuristically classified to highlight altimetric levels, a reclassified slope map (allowing to highlight differences in relief , and a morphographic map (derived from a heuristic reclassification of the slope map to highlight volcanic landforms. The theoretical aspects of geomorphological mapping contribute to set the conceptual basis to support landslide mapping. The GIS thematic layers provide context and establish an overall characterization of landslide processes within the watershed. Through the retrieval and on

  9. New Map Symbol System for Disaster Management

    Science.gov (United States)

    Marinova, Silvia T.

    2018-05-01

    In the last 10 years Bulgaria was frequently affected by natural and man-made disasters that caused considerable losses. According to the Bulgarian Disaster Management Act (2006) disaster management should be planned at local, regional and national level. Disaster protection is based on plans that include maps such as hazard maps, maps for protection, maps for evacuation planning, etc. Decision-making and cooperation between two or more neighboring municipalities or regions in crisis situation are still rendered difficult because the maps included in the plans differ in scale, colors, map symbols and cartographic design. To improve decision-making process in case of emergency and to reduce the number of human loss and property damages disaster management plans at local and regional level should be supported by detailed thematic maps created in accordance with uniform contents, map symbol system and design. The paper proposes a new symbol system for disaster management that includes a four level hierarchical classification of objects and phenomena according to their type and origin. All objects and phenomena of this classification are divided into five categories: disasters; infrastructure; protection services and infrastructure for protection; affected people and affected infrastructure; operational sites and activities. The symbols of these categories are shown with different background colors and shapes so that they are identifiable. All the symbols have simple but associative design. The new symbol system is used in the design of a series of maps for disaster management at local and regional level.

  10. Testing geoscience data visualization systems for geological mapping and training

    Science.gov (United States)

    Head, J. W.; Huffman, J. N.; Forsberg, A. S.; Hurwitz, D. M.; Basilevsky, A. T.; Ivanov, M. A.; Dickson, J. L.; Senthil Kumar, P.

    2008-09-01

    Traditional methods of planetary geological mapping have relied on photographic hard copy and light-table tracing and mapping. In the last several decades this has given way to the availability and analysis of multiple digital data sets, and programs and platforms that permit the viewing and manipulation of multiple annotated layers of relevant information. This has revolutionized the ability to incorporate important new data into the planetary mapping process at all scales. Information on these developments and approaches can be obtained at http://astrogeology.usgs. gov/ Technology/. The processes is aided by Geographic Information Systems (GIS) (see http://astrogeology. usgs.gov/Technology/) and excellent analysis packages (such as ArcGIS) that permit co-registration, rapid viewing, and analysis of multiple data sets on desktop displays (see http://astrogeology.usgs.gov/Projects/ webgis/). We are currently investigating new technological developments in computer visualization and analysis in order to assess their importance and utility in planetary geological analysis and mapping. Last year we reported on the range of technologies available and on our application of these to various problems in planetary mapping. In this contribution we focus on the application of these techniques and tools to Venus geological mapping at the 1:5M quadrangle scale. In our current Venus mapping projects we have utilized and tested the various platforms to understand their capabilities and assess their usefulness in defining units, establishing stratigraphic relationships, mapping structures, reaching consensus on interpretations and producing map products. We are specifically assessing how computer visualization display qualities (e.g., level of immersion, stereoscopic vs. monoscopic viewing, field of view, large vs. small display size, etc.) influence performance on scientific analysis and geological mapping. We have been exploring four different environments: 1) conventional

  11. Determining of the morpholithology types in the Kamchia River basin (Eastern Bulgaria by means of geographic information system (GIS

    Directory of Open Access Journals (Sweden)

    Nikolova Valentina

    2010-01-01

    Full Text Available The article presents the morpholithology types in the Kamchia River basin (Eastern Bulgaria - the catchment area of the largest Bulgarian river which flows into the Black Sea. These types are determined on the base of information about the relief and lithological substrate. The rocks in the investigated area are divided into groups accord­ing to their physical-mechanical and chemical composition, and the relief types are determined in regards to the morphographic features of the catchment area. The research is done on the base of geological and topographic maps in scale 1:200 000 and also terrain observations are taken into account. As a result of the research a map of morpholithological types (1:200 000 is made. The map shows a considerable variety of the morpholithological types in the Kamchia River basin. This variety determines the appearance of the territory and also influences on the landscape differentiation. The analyses and composition of the morpholithology map are done in GIS envi­ronment. For that purpose a GIS database of lithology and relief (topography of the Kamchia River basin is built as spatial 'overlay' analysis is done.

  12. Evaluation of a Community's Risk for Canine Parvovirus and Distemper Using Antibody Testing and GIS Mapping of Animal Shelter Intakes.

    Science.gov (United States)

    Spindel, Miranda E; Krecic, Matthew R; Slater, Margaret R; Vigil, Nicole

    2018-03-20

    This cross-sectional study aimed to identify where dogs with negative antibody tests to canine parvovirus (CPV) and canine distemper virus (CDV) originated when entering a community shelter, using a commercially available ELISA antibody test and Geographic Information Systems mapping. Of 2745 canines entering during a three-month period, 1056 test results were obtained. Dogs or puppies weighing over 2 lb were eligible if they could be humanely, nonchemically restrained for phlebotomy. Age and minor health issues weren't exclusions. Dogs were excluded if trained personnel were concerned health would be compromised by phlebotomy. Blood samples were collected within 24 hours of entry. Four hundred and twenty-seven (40%) dogs had positive antibody test results for both viruses, 422 (40%) were positive for CPV, 37 (4%) were positive for CDV, and 170 (16%) were negative for both. Mapping revealed geographic patterns for dogs with negative antibody tests. This shelter admitted dogs with negative CPV and/or CDV antibody tests from defined community areas. Targeting vaccination efforts in communities to areas where dogs with negative antibody tests originate could be an effective wellness strategy.

  13. Cost optimization of a real-time GIS-based management system for hazardous waste transportation.

    Science.gov (United States)

    Zhu, Yun; Lin, Che-Jen; Zhong, Yilong; Zhou, Qing; Lin, Che-Jen; Chen, Chunyi

    2010-08-01

    In this paper, the design and cost analysis of a real-time, geographical information system (GIS) based management system for hazardous waste transportation are described. The implementation of such a system can effectively prevent illegal dumping and perform emergency responses during the transportation of hazardous wastes. A case study was conducted in Guangzhou, China to build a small-scale, real-time management system for waste transportation. Two alternatives were evaluated in terms of system capability and cost structure. Alternative I was the building of a complete real-time monitoring and management system in a governing agency; whereas alternative II was the combination of the existing management framework with a commercial Telematics service to achieve the desired level of monitoring and management. The technological framework under consideration included locating transportation vehicles using a global positioning system (GPS), exchanging vehicle location data via the Internet and Intranet, managing hazardous waste transportation using a government management system and responding to emergencies during transportation. Analysis of the cost structure showed that alternative II lowered the capital and operation cost by 38 and 56% in comparison with alternative I. It is demonstrated that efficient management can be achieved through integration of the existing technological components with additional cost benefits being achieved by streamlined software interfacing.

  14. An Integrated GPS/PDA/GIS Telegeoprocessing System for Traffic and Environment

    Directory of Open Access Journals (Sweden)

    Ana Luísa Ramos

    2009-12-01

    Full Text Available The development of sustainable urban transport networks is a present priority for world leaders, national governors and local authorities. The challenge is to increase mobility reducing the adverse impacts of transport. The potential of Intelligent Transportation Systems (ITS to provide solutions for the 21 st century sustainable urban transport system has already been demonstrated in several piecewise applications. An integrated framework that addresses the needs of municipal authorities, that integrates the data spread through different sources, that supports the intelligent traffic and environment operations, and that provides information to the citizens steering their involvement and commitment is of critical importance and can be the enabler towards the creation of more efficient, safety, and environmental-friendly transport networks that promote the citizens' quality of life. This work describes an integrated GPS (Global Positioning System / PDA (Personal Digital Assistant / GIS (Geographical Information System system which is part of the mentioned framework. The system includes prototypes for mobile urban traffic data acquisition, with a GPS -equipped vehicle, a PDA application and wireless communications, and for a geodatabase with a related Web application for urban traffic and environment. Their integrated operation is exemplified for a real urban transport system.

  15. Access to dialysis services: A systematic mapping review based on geographical information systems.

    Science.gov (United States)

    Hoseini, Benyamin; Bagheri, Nasser; Kiani, Behzad; Azizi, Amirabbas; Tabesh, Hamed; Tara, Mahmood

    2018-05-07

    Equitable access to healthcare services constitutes one of the leading priorities of healthcare provision and access to dialysis services (ADS) has an essential impact on patients depending on renal dialysis. The many existing GIS-based ADS evaluations include various spatial and non-spatial factors affecting ADS. We systematically mapped and reviewed the available literature with reference to this area identifying gaps in current GIS-based ADS measurements and developing recommendations for future studies. A threestep, systematic mapping review of the available GIS-related evidence in PubMed, Embase, Web of science, Scopus, Science Direct and IEEE Xplore was performed in May 2016 and the information collected updated October 2017 by two independent selection processes. The quality of the studies was assessed using an informal, mixed-approach scoring system. Out of 1119 literature references identified, 36 were identified and used for final review after removal of duplicates, study screenings and applying inclusion/exclusion criteria. Given the contents of the selected studies, three study groups were identified and 41 factors with potential effects on ADS determined. These studies mainly addressed the potential and/or spatial aspects of ADS. Our systematic mapping review of the evidence revealed that current GIS-based measures of ADS tend to calculate potential ADS instead of a realized one. It was also noted that listed factors affecting ADS were mainly nonspatial bringing forth the hypothesis that designing an integrated ADS index could possibly produce better ADS score than those currently advocated. Some primary and secondary research suggestions are made and a list of recommendations offered.

  16. Access to dialysis services: A systematic mapping review based on geographical information systems

    Directory of Open Access Journals (Sweden)

    Benyamin Hoseini

    2018-05-01

    Full Text Available Equitable access to healthcare services constitutes one of the leading priorities of healthcare provision and access to dialysis services (ADS has an essential impact on patients depending on renal dialysis. The many existing GIS-based ADS evaluations include various spatial and non-spatial factors affecting ADS. We systematically mapped and reviewed the available literature with reference to this area identifying gaps in current GIS-based ADS measurements and developing recommendations for future studies. A threestep, systematic mapping review of the available GIS-related evidence in PubMed, Embase, Web of science, Scopus, Science Direct and IEEE Xplore was performed in May 2016 and the information collected updated October 2017 by two independent selection processes. The quality of the studies was assessed using an informal, mixed-approach scoring system. Out of 1119 literature references identified, 36 were identified and used for final review after removal of duplicates, study screenings and applying inclusion/exclusion criteria. Given the contents of the selected studies, three study groups were identified and 41 factors with potential effects on ADS determined. These studies mainly addressed the potential and/or spatial aspects of ADS. Our systematic mapping review of the evidence revealed that current GIS-based measures of ADS tend to calculate potential ADS instead of a realized one. It was also noted that listed factors affecting ADS were mainly nonspatial bringing forth the hypothesis that designing an integrated ADS index could possibly produce better ADS score than those currently advocated. Some primary and secondary research suggestions are made and a list of recommendations offered.

  17. A Web-based Visualization System for Three Dimensional Geological Model using Open GIS

    Science.gov (United States)

    Nemoto, T.; Masumoto, S.; Nonogaki, S.

    2017-12-01

    A three dimensional geological model is an important information in various fields such as environmental assessment, urban planning, resource development, waste management and disaster mitigation. In this study, we have developed a web-based visualization system for 3D geological model using free and open source software. The system has been successfully implemented by integrating web mapping engine MapServer and geographic information system GRASS. MapServer plays a role of mapping horizontal cross sections of 3D geological model and a topographic map. GRASS provides the core components for management, analysis and image processing of the geological model. Online access to GRASS functions has been enabled using PyWPS that is an implementation of WPS (Web Processing Service) Open Geospatial Consortium (OGC) standard. The system has two main functions. Two dimensional visualization function allows users to generate horizontal and vertical cross sections of 3D geological model. These images are delivered via WMS (Web Map Service) and WPS OGC standards. Horizontal cross sections are overlaid on the topographic map. A vertical cross section is generated by clicking a start point and an end point on the map. Three dimensional visualization function allows users to visualize geological boundary surfaces and a panel diagram. The user can visualize them from various angles by mouse operation. WebGL is utilized for 3D visualization. WebGL is a web technology that brings hardware-accelerated 3D graphics to the browser without installing additional software. The geological boundary surfaces can be downloaded to incorporate the geologic structure in a design on CAD and model for various simulations. This study was supported by JSPS KAKENHI Grant Number JP16K00158.

  18. Highlights from ACM SIGSPATIAL GIS 2011: the 19th ACM SIGSPATIAL International Conference on Advances in Geographic Information Systems: (Chicago, Illinois - November 1 - 4, 2011)

    DEFF Research Database (Denmark)

    Jensen, Christian S.; Ofek, Eyal; Tanin, Egemen

    2012-01-01

    ACM SIGSPATIAL GIS 2011 was the 19th gathering of the premier event on spatial information and Geographic Information Systems (GIS). It is also the fourth year that the conference was held under the auspices of ACM's most recent special interest group, SIGSPATIAL. Since its start in 1993, the con...

  19. Real Time Integration of Field Data Into a GIS Platform for the Management of Hydrological Emergencies

    Science.gov (United States)

    Mangiameli, M.; Mussumeci, G.

    2013-01-01

    A wide series of events requires immediate availability of information and field data to be provided to decision-makers. An example is the necessity of quickly transferring the information acquired from monitoring and alerting sensors or the data of the reconnaissance of damage after a disastrous event to an Emergency Operations Center. To this purpose, we developed an integrated GIS and WebGIS system to dynamically create and populate via Web a database with spatial features. In particular, this work concerns the gathering and transmission of spatial data and related information to the desktop GIS so that they can be displayed and analyzed in real time to characterize the operational scenario and to decide the rescue interventions. As basic software, we used only free and open source: QuantumGIS and Grass as Desktop GIS, Map Server with PMapper application for the Web-Gis functionality and PostGreSQL/PostGIS as Data Base Management System (DBMS). The approach has been designed, developed and successfully tested in the management of GIS-based navigation of an autonomous robot, both to map its trajectories and to assign optimal paths. This paper presents the application of our system to a simulated hydrological event that could interest the province of Catania, in Sicily. In particular, assuming that more teams draw up an inventory of the damage, we highlight the benefits of real-time transmission of the information collected from the field to headquarters.

  20. REAL TIME INTEGRATION OF FIELD DATA INTO A GIS PLATFORM FOR THE MANAGEMENT OF HYDROLOGICAL EMERGENCIES

    Directory of Open Access Journals (Sweden)

    M. Mangiameli

    2014-01-01

    Full Text Available A wide series of events requires immediate availability of information and field data to be provided to decision-makers. An example is the necessity of quickly transferring the information acquired from monitoring and alerting sensors or the data of the reconnaissance of damage after a disastrous event to an Emergency Operations Center. To this purpose, we developed an integrated GIS and WebGIS system to dynamically create and populate via Web a database with spatial features. In particular, this work concerns the gathering and transmission of spatial data and related information to the desktop GIS so that they can be displayed and analyzed in real time to characterize the operational scenario and to decide the rescue interventions. As basic software, we used only free and open source: QuantumGIS and Grass as Desktop GIS, Map Server with PMapper application for the Web-Gis functionality and PostGreSQL/PostGIS as Data Base Management System (DBMS. The approach has been designed, developed and successfully tested in the management of GIS-based navigation of an autonomous robot, both to map its trajectories and to assign optimal paths. This paper presents the application of our system to a simulated hydrological event that could interest the province of Catania, in Sicily. In particular, assuming that more teams draw up an inventory of the damage, we highlight the benefits of real-time transmission of the information collected from the field to headquarters.

  1. Teaching with a GIS using existing grade 7--12 curricula

    Science.gov (United States)

    Brown, Stephen Castlebury

    As Geographic Information Systems (GIS) become less expensive and easier to use, the demand for individuals knowledgeable of this technology increases. Associated with this is the current and future necessity of a public who understands the wide range of technical proficiencies needed for accurate GIS mapping. On a nationwide basis, GIS education in K--12 schools is rare. In the few instances where a school teaches students about these technologies, it is usually led by a single teacher and is not taught on a school-wide basis. This situation exists despite some research indicating that a classroom GIS might enhance the learning of students. Two primary barriers to teacher use and acceptance of a classroom GIS have been identified. First, most teachers lack any training in the use of a GIS. Secondly, there is conflict over focusing upon teaching about the use of a GIS or teaching with a GIS. Beginning in August of 1996 and concluding in August of 1998, nine separate GIS education programs were conducted for a variety of youths and adult educator audiences. Observations of participant's interactions with the GIS program ArcView would lead to the development of a demonstration curriculum and GIS application. To overcome institutional and educational barriers to youth GIS education, a curriculum partly adapted from existing materials and partly created from original materials was developed in Hypertext Markup Language (HTML). A corresponding GIS application was developed to teach about a GIS while instructing with a GIS. The curriculum was distributed for use on CD-ROM and called Georom. The hypertext curriculum provided lessons and exercises that addressed National Science Education Standards and was accessed using an Internet web browser. The curriculum included World Wide Web links to Internet sites with more information about specific topics. Modifications were made to ArcView's Graphical User Interface (GUI) that maintained the general appearance of its standard

  2. An automated model for rooftop PV systems assessment in ArcGIS using LIDAR

    Directory of Open Access Journals (Sweden)

    Mesude Bayrakci Boz

    2015-08-01

    Full Text Available As photovoltaic (PV systems have become less expensive, building rooftops have come to be attractive for local power production. Identifying rooftops suitable for solar energy systems over large geographic areas is needed for cities to obtain more accurate assessments of production potential and likely patterns of development. This paper presents a new method for extracting roof segments and locating suitable areas for PV systems using Light Detection and Ranging (LIDAR data and building footprints. Rooftop segments are created using seven slope (tilt, ve aspect (azimuth classes and 6 different building types. Moreover, direct beam shading caused by nearby objects and the surrounding terrain is taken into account on a monthly basis. Finally, the method is implemented as an ArcGIS model in ModelBuilder and a tool is created. In order to show its validity, the method is applied to city of Philadelphia, PA, USA with the criteria of slope, aspect, shading and area used to locate suitable areas for PV system installation. The results show that 33.7% of the buildings footprints areas and 48.6% of the rooftop segments identi ed is suitable for PV systems. Overall, this study provides a replicable model using commercial software that is capable of extracting individual roof segments with more detailed criteria across an urban area.

  3. A Geographic Information System (GIS) analysis for trace metal assessment of sediments in the Gulf of Paria, Trinidad

    International Nuclear Information System (INIS)

    Ragbirsingh, Y.; Norville, W.

    2005-01-01

    The Gulf of Paria is a semi-enclosed shallow basin with increasing coastal development activities along Trinidad's west coast. Sediments present a host for trace metal pollutants from overlying waters, therefore determination of their content is critical in evaluating and detecting sources of marine pollution. This paper presents a Geographic Information System (GIS) analysis of geochemical assessment for trace metals in coastal sediments of the Gulf of Paria. This GIS approach facilitates interpretation of the spatial relationships among key environmental processes. The GIS development involves the integration of spatial and attribute data pertaining to bathymetry, current systems, topography, rivers, land use/land cover and coastal sediments. It employs spatial interpolation and retrieval operations to analyze the total trace metal concentrations of aluminum, copper and lead in the sediments and the clay-enriched sediments, to determine whether they are related to sediment type or are affected by the discharge from anthropogenic sources. Spatial distribution modeling of element concentrations are produced to indicate contamination plumes from possible anthropogenic sources such as rivers entering the Gulf of Paria, and to reveal potential hot spots and dispersion patterns. A direct spatial correlation between clay-enriched sediments and high concentrations of aluminum and lead is detected, however regions of high concentrations of copper and lead indicate a relationship to anthropogenic sources. The effectiveness of GIS for visualization, spatial query and overlay of geochemical analysis is demonstrated [es

  4. Mapping crime scenes and cellular telephone usage

    CSIR Research Space (South Africa)

    Schmitz, Peter MU

    2000-12-01

    Full Text Available This paper describes a method that uses a desktop geographical information system (GIS) to plot cellular telephone conversations made when crimes are committed, such as hijackings, hostage taking, kidnapping, rape and murder. The maps produced...

  5. Drinking Water Mapping Application (DWMA) - Public Version

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Drinking Water Mapping Application (DWMA) is a web-based geographic information system (GIS) that enhances the capabilities to identify major contaminant risks...

  6. High-Precision Land-Cover-Land-Use GIS Mapping and Land Availability and Suitability Analysis for Grass Biomass Production in the Aroostook River Valley, Maine, USA

    Directory of Open Access Journals (Sweden)

    Chunzeng Wang

    2015-03-01

    Full Text Available High-precision land-cover-land-use GIS mapping was performed in four major townships in Maine’s Aroostook River Valley, using on-screen digitization and direct interpretation of very high spatial resolution satellite multispectral imagery (15–60 cm and high spati