WorldWideScience

Sample records for synthesized layered inorganic-organic

  1. Six new inorganic-organic hybrids based on rigid triangular ligands: Syntheses, structures and properties

    Science.gov (United States)

    Li, Na; Huang, Rudan

    2016-01-01

    Six new inorganic-organic hybrids based on rigid triangular N-containing ligands, NaCuI2(tib)4(H2O)4[H2PWVWVI11O40][H2PWVI12O40]·6H2O (1), CuII3(tib)4Cl4[H2PWVI12O40]2·4H2O (2), Co(tib)2[PWV3WVI9O38]·5H2O (3), CuII3(tib)2[P2MoVI5O22(O2)]·4H2O (4), Mn(pytpy)2MoVI4O13 (5) and Co(pytpy)2MoVI4O13 (6) (tib=1,3,5-tris(1-imidazolyl)benzene, pytpy=4'-(4;-pyridyl)2,4':6',4;-terpyridine), have been hydrothermally synthesized. Single crystal X-ray diffraction studies revealed that compounds 1-4 display two-dimensional (2D) layered structures, and in compounds 1-3, the adjacent Keggin anions link with each other by W-O-W covalent interactions to form 1D inorganic chains. Compounds 5-6 are 3D ;pillar-layer; frameworks based on bimetal-oxide layers pillared by the pytpy ligands. The compounds have been characterized by elemental analysis, powder X-ray diffraction, X-ray photoelectron spectroscopy and thermo gravimetric analyses. Moreover, the electrochemical and catalytic properties of compound 1 have been investigated as well.

  2. Photoluminescence property of a novel inorganic-organic red emitting phosphor based on Mg/Al/Eu layered double hydroxide

    Science.gov (United States)

    Gao, Xiaorui; Lei, Lixu; Yin, Yaobing; Xie, Juan; Wang, Yuqiao; Gu, Wei

    2014-07-01

    A novel inorganic-organic red light emitting phosphor was synthesized by intercalating a sensitizer anion, terephthalate into Mg/Al/Eu layered double hydroxides through an ion exchange method. The basal spacing is 13.9 Å, indicating that a vertical arrangement of terephthalate anions within the gallery is adopted. This material displays much enhanced red luminescence from Eu3+ ions, suggesting that there is an efficient energy transfer from the excited state of the intercalated terephthalate anions to Eu3+ centres in the host layers. The optimal doping concentration of Eu3+ is 10 mol %.

  3. Polyoxotungstate-Surfactant Layered Crystal toward Conductive Inorganic-Organic Hybrid

    Directory of Open Access Journals (Sweden)

    Noritaka Mizuno

    2012-05-01

    Full Text Available A polyoxotungstate-surfactant hybrid layered compound was synthesized as a single phase by using decatungstate ([W10O32]4−, W10 and hexadecylpyridinium (C16py. The X-ray structure analysis combined with infrared spectroscopy and elemental analysis revealed the formula to be (C16py4[W10O32] (C16py-W10. The layered structure consisted of alternative stacking of W10 inorganic monolayers and interdigitated C16py bilayers with layered periodicity of 23.3 Å. Each W10 anion in the W10 inorganic monolayers was isolated by the hydrophilic heads of C16py. The hybrid crystals of C16py-W10 decomposed at around 500 K. The conductivity of the hybrid layered crystal was estimated to be 4.8 × 10−6 S cm−1 at 423 K by alternating current (AC impedance spectroscopy.

  4. Syntheses, structures, and magnetic properties of inorganic-organic hybrid cobalt(II) phosphites containing bifunctional ligands.

    Science.gov (United States)

    Fan, Jian; Yee, Gordon T; Wang, Guangbin; Hanson, Brian E

    2006-01-23

    Seven new cobalt(II) phosphites, [Co(HPO(3))(C(14)H(14)N(4))(H(2)O)(2)].2H(2)O (1), [Co(HPO(3))(C(22)H(18)N(4))].H(2)O (2), [Co(2)(HPO(3))(2)(C(22)H(18)N(4))(2)H(2)O].H(2)O (3), [Co(2)(HPO(3))(2)(C(12)H(10)N(4))(1.5)H(2)O].1.5H(2)O (4), [Co(HPO(3))(C(14)H(14)N(4))(0.5)].H(2)O (5), [Co(HPO(3))(C(18)H(16)N(4))(0.5)] (6), and [Co(HPO(3))(C(18)H(16)N(4))(0.5)] (7) were synthesized in the presence of 1,2-bis(imidazol-1-ylmethyl)benzene (L1), 1,4-bis(benzimidazol-1-ylmethyl)benzene (L2), 1,3-bis(benzimidazol-1-ylmethyl)benzene (L3), 1,4-bis(1-imidazolyl)benzene (L4), 1,4-bis(imidazol-1-ylmethyl)benzene (L5), 1,4-bis(imidazol-1-ylmethyl)naphthalene (L6), and 1,5-bis(imidazol-1-ylmethyl)naphthalene (L7), respectively, and their structures were determined by X-ray crystallography. Compound 1 is a molecular compound in which two cobalt(II) ions are held together by double mu-O linkages. The inorganic framework of compounds 2 and 3 are composed of vertex-shared CoO(2)N(2)/CoO(3)N(2) and HPO(3) polyhedra that form four rings; these are further linked by an organic ligand to generate 2D sheets. Compounds 4 and 5 both have 1D inorganic structures, with the bifunctional ligands connected to each side of the ladder by coordination bonds to give 2D hybrid sheets. A 3D organically pillared hybrid framework is observed in 6 and 7. In 6, the stacking of the interlayer pillars gives rise to a small hydrophobic channel that extends through the entire structure parallel to the sheets. The temperature-dependent magnetic susceptibility measurements of these compounds show weak interactions between the metal centers, mediated through the mu-O and/or O-P-O linkages.

  5. Layered double hydroxides as electrode materials for Ni based batteries and as novel inorganic/organic hybrid materials

    Energy Technology Data Exchange (ETDEWEB)

    Caravaggio, G.

    2002-07-01

    This study examined the electrochemical properties of layered double hydroxides (LDH) in half-cells to determine if they can be used in nickel-cadmium (Ni-Cd) and nickel-metal hydride (NiMH) batteries. The LDHs were prepared by coprecipitation and were characterized by X-ray diffraction analysis. The nickel-aluminium LDHs were found to be the most stable during potassium hydroxide electrolyte discharge because the aluminium acted in a two fold manner. The high charge to radius ratio increased the electrostatic interaction between the anions and the metal layers. The acidity of the hydroxyl groups was due to the high exchange of electrons. The powders had lower discharge capacity compared to commercial electrode materials because of their low density. The nickel-vanadium LDHs exchanged only up to 1.2 electrons and were stable only up to a maximum of 14 days in electrolytic solutions of the cells. Zinc-aluminium LDHs were also synthesized and intercalated with phenyl phosphonic acid or 1,4-phenylene bis phosphonic acid to create microporous materials. X-ray diffraction, infra-red spectroscopy and nuclear magnetic resonance was used to characterize the compounds and determine crystallographic spacing. Grafting of both phosphonates to the metal layers had occurred and both materials showed little or no microporosity.

  6. Syntheses, structures and photocatalytic properties of five new praseodymium-antimony oxochlorides: from discrete clusters to 3D inorganic-organic hybrid racemic compounds.

    Science.gov (United States)

    Zou, Guo-Dong; Wang, Ze-Ping; Song, Ying; Hu, Bing; Huang, Xiao-Ying

    2014-07-14

    Five novel praseodymium-antimony oxochloride (Pr-Sb-O-Cl) cluster-based compounds, namely (2-MepyH)2[Fe(1,10-phen)3]2[Pr4Sb12O18Cl14.6(OH)2.4(Hsal)]·H2O (1), (2-MepyH)2[Fe(1,10-phen)3]4{[Pr4Sb12O18Cl13.5(OH)0.5](bcpb)2[Pr4Sb12O18Cl13.5(OH)0.5]}·42H2O (2), (3-MepyH)2[Fe(1,10-phen)3]{[Pr4Sb12O18Cl13(H2O)2](bcpb)}·2(3-Mepy)·3H2O (3), [Fe(1,10-phen)3]2{[Pr4Sb12O18Cl10(H2O)2](bcpb)2}·3(3-Mepy)·13H2O (4), and (2-MepyH)6[Fe(1,10-phen)3]10{[Pr4Sb12O18Cl13(OH)2]2[Pr4Sb12O18Cl9][Pr4Sb12O18Cl9(OH)2]2(Hpdc)10(pdc)2}·110H2O (5) (2-Mepy = 2-methylpyridine, 3-Mepy = 3-methylpyridine, 1,10-phen = 1,10-phenanthroline, H2sal = salicylic acid, H3bcpb = 3,5-bis(4-carboxyphenoxy)benzoic acid, H3pdc = 3,5-pyrazoledicarboxylic acid) have been solvothermally synthesized and structurally characterized. Compound 1 is the first zero-dimensional (0D) Pr-Sb-O-Cl cluster decorated by an organic ligand. Compounds 2-4 are constructed from the same H3bcpb ligands but adopt different structures: 2 represents a rare example of a one-dimensional (1D) nanotubular structure based on high-nuclearity clusters; 3 exhibits a two-dimensional (2D) mono-layered structure, in which left-handed and right-handed helical chains are alternately arranged, while 4 features a double-layered structure with an unprecedented (3,3,6)-connected 3-nodal topological net. Compound 5 is a unique three-dimensional (3D) 2-fold interpenetrating racemic compound, simultaneously containing three kinds of Pr-Sb-O-Cl-pdc clusters. UV-light photocatalytic H2 evolution activity was observed for compound 3 with Pt as a co-catalyst and MeOH as a sacrificial electron donor. In addition, the magnetic properties of compounds 1 and 5 are also studied.

  7. Investigation of chemical bonding states at interface of Zn/organic materials for analysis of early stage of inorganic/organic hybrid multi-layer formation

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Ken, E-mail: k_cho@jwri.osaka-u.ac.jp [Joining and Welding Research Institute, Osaka University, 11-1 Mihogaoka, Ibaraki, Osaka 567-0047 (Japan); Japan Science and Technology Agency, CREST (Japan); Takenaka, Kosuke; Setsuhara, Yuichi [Joining and Welding Research Institute, Osaka University, 11-1 Mihogaoka, Ibaraki, Osaka 567-0047 (Japan); Japan Science and Technology Agency, CREST (Japan); Shiratani, Masaharu [Department of Electronics, Kyushu University, 744 Moto-oka, Nishi-ku, Fukuoka 819-0395 (Japan); Japan Science and Technology Agency, CREST (Japan); Sekine, Makoto; Hori, Masaru [Plasma Nanotechnology Research Center, Nagoya University Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Japan Science and Technology Agency, CREST (Japan)

    2012-11-15

    Interactions between Ar-O{sub 2} mixture plasmas and Zn thin film on polyethylene terephthalate (PET) were investigated using the combinatorial plasma process analyzer, on the basis of nondestructive depth analyses of chemical bonding states at Zn thin film and Zn/PET interface via hard X-ray photoelectron spectroscopy (HXPES). After the Ar-O{sub 2} plasma exposure, peak-area ratio of O 1 s to Zn 2p{sub 3/2} evaluated from the HXPES spectra is found to increase with increasing the ion saturation current Multiplication-Sign time and saturated at the value obtained from ZnO. The HXPES C 1 s spectra measured at a take-off angle (TOA) of 80 Degree-Sign showed insignificant change in oxygen functionalities (O=C-O bond and C-O bond) after the deposition of Zn thin film and the plasma exposure. Whereas, the HXPES C 1 s spectra measurement at a TOA of 20 Degree-Sign suggested that the oxygen functionalities degraded in shallower regions up to about a few nanometer from the Zn/PET interface due to deposition of Zn thin film. However, after the plasma exposure, oxidation of PET substrate at the degraded layer of Zn/PET interface was caused by oxygen radicals and/or ions, which diffused through the Zn thin film.

  8. Synthesis and structure of a bimetallic hybrid inorganic/organic layered coordination polymer with an octamolybdate cluster variant trapped between the α and δ isomeric forms

    Science.gov (United States)

    Springsteen, Caleb H.; Johnston, Lindsey L.; LaDuca, Robert L.

    2007-09-01

    Hydrothermal combination of CuSO 4, MoO 3, and 4-phenylpyridine (4-phpyr) in a 1:4:4.5 ratio under basic conditions afforded purple crystals of {[Cu(4-phpyr) 4] 2(Mo 8O 26)·4-phpyr} ( 1), which were analyzed by spectroscopy and single crystal X-ray diffraction. The asymmetric octamolybdate clusters in 1 adopt an intermediate structural variant between the known α and δ isomeric forms, with four octahedral and three tetrahedral molybdenum coordination spheres, along with one molybdenum atom in a highly distorted square pyramidal environment. Paddle-wheel shaped [Cu(4-phpyr) 4] 2+ cations link adjacent {α/δ-Mo 8O 26} 4- clusters into a 2-D layered rhomboid grid coordination polymer. Uncoordinated 4-phpyr molecules lie in incipient voids in the interlamellar regions. The structure of 1 illustrates the utility of sterically bulky coordination complexes in the stabilization of intermediate conformations during energetically facile polyoxometallate isomer interconversion. Crystallographic data: triclinic, P1, a = 13.717(3) Å, b = 13.728(3) Å, c = 14.809(3) Å, α = 109.251(4)°, β = 107.670(4)°, γ = 92.005(4)°, V = 2480.0(9) Å 3, R1 = 0.0637, wR2 = 0.1054.

  9. Inorganic-organic rubbery scintillators

    CERN Document Server

    Gektin, A V; Pogorelova, N; Neicheva, S; Sysoeva, E; Gavrilyuk, V

    2002-01-01

    Spectral-kinetic luminescence properties of films, containing homogeneously dispersed scintillation particles of CsI, CsI:Tl, CsI:Na, and NaI:Tl in optically transparent organosiloxane matrix, are presented. Material is flexible and rubbery and in consequence the detectors of convenient shapes can be produced. It is found that luminescence spectra of the received films are identical whereas decay times are much shorter compared to the same ones of the corresponding single crystals. Layers with pure CsI demonstrate only the fast UV emission (307 nm, 10 ns) without blue microsecond afterglow typical for crystals. The films containing NaI:Tl are non-hygroscopic and preserve scintillation properties for a long time in humid atmosphere unlike single crystals. Organosiloxane layers with CsI:Tl particles provide high light output with good energy resolution for sup 5 sup 5 Fe, sup 1 sup 0 sup 9 Cd, sup 2 sup 4 sup 1 Am sources, and are capable of detecting both X-rays and alpha-, beta-particles.

  10. Ultralight Weight Optical Systems Using Nano-Layered Synthesized Materials

    Science.gov (United States)

    Clark, Natalie; Breckinridge, James

    2014-01-01

    Optical imaging is important for many NASA science missions. Even though complex optical systems have advanced, the optics, based on conventional glass and mirrors, require components that are thick, heavy and expensive. As the need for higher performance expands, glass and mirrors are fast approaching the point where they will be too large, heavy and costly for spacecraft, especially small satellite systems. NASA Langley Research Center is developing a wide range of novel nano-layered synthesized materials that enable the development and fabrication of ultralight weight optical device systems that enable many NASA missions to collect science data imagery using small satellites. In addition to significantly reducing weight, the nano-layered synthesized materials offer advantages in performance, size, and cost.

  11. The enhancement of photoresponse of an ordered inorganic-organic hybrid architecture by increasing interfacial contacts.

    Science.gov (United States)

    Zhang, Bin; Chen, Xudong; Ma, Shaohua; Chen, Yujie; Yang, Jin; Zhang, Mingqiu

    2010-02-10

    A modified ZnO quantum dot/polythiophene (ZnO/PTh) inorganic-organic hybrid architecture was fabricated by using ordered mesoporous silica (SBA-15) as the retaining template. First, a two-step strategy was developed to synthesize an ordered organic conducting polymer composite (PTh/SBA-15). Then, ZnO quantum dots were in situ formed on the pore walls of the ordered PTh/SBA-15 composite. Photoresponse of the inorganic-organic hybrid was studied with respect to its incident photon to collected electron conversion efficiency (IPCE) and morphology. The presence of SBA-15 proved to be critical for controlling the interfacial morphology and hence enlarging the interfacial area of the inorganic-organic heterojunction. The proposed approach may act as a key method to open up potential applications in photovoltaic devices.

  12. Hybrid polaritons in a resonant inorganic/organic semiconductor microcavity

    Energy Technology Data Exchange (ETDEWEB)

    Höfner, M., E-mail: mhoefner@physik.hu-berlin.de; Sadofev, S.; Henneberger, F. [Institut für Physik, Humboldt-Universität zu Berlin, Newtonstr.15, 12489 Berlin (Germany); Kobin, B.; Hecht, S. [Institut für Chemie, Humboldt-Universität zu Berlin, Brook-Taylor-Str. 2, 12489 Berlin (Germany)

    2015-11-02

    We demonstrated the strong coupling regime in a hybrid inorganic-organic microcavity consisting of (Zn,Mg)O quantum wells and ladder-type oligo(p-phenylene) molecules embedded in a polymer matrix. A Fabry-Pérot cavity is formed by an epitaxially grown lower ZnMgO Bragg reflector and a dielectric mirror deposited atop of the organic layer. A clear anticrossing behavior of the polariton branches related to the Wannier-Mott and Frenkel excitons, and the cavity photon mode with a Rabi-splitting reaching 50 meV, is clearly identified by angular-dependent reflectivity measurements at low temperature. By tailoring the structural design, an equal mixing with weights of about 0.3 for all three resonances is achieved for the middle polariton branch at an incidence angle of about 35°.

  13. High-quality vertically aligned ZnO nanorods synthesized by microwave-assisted CBD with ZnO-PVA complex seed layer on Si substrates

    Energy Technology Data Exchange (ETDEWEB)

    Hassan, J.J., E-mail: j1j2h72@yahoo.com [Nano-Optoelectronics Research and Technology Laboratory (N.O.R), School of Physics University Sains Malaysia, Penang 11800 (Malaysia); Hassan, Z.; Abu-Hassan, H. [Nano-Optoelectronics Research and Technology Laboratory (N.O.R), School of Physics University Sains Malaysia, Penang 11800 (Malaysia)

    2011-06-09

    Highlights: > We synthesis high quality ZnO nanorods with low temperature. > We used inorganic-organic nanocomposites ZnO-PVA to prepare good seed layer. > We observed the effect of annealing temperatures of ZnO-PVA seed layer on diameter of produced ZnO nanorods. > We obtained very high photoluminescence from ZnO nanorods synthesis on silicon substrate. - Abstract: We successfully synthesized vertically aligned zinc oxide (ZnO) nanorods on seeded silicon substrates using chemical bath deposition assisted by microwave heating. ZnO nanorods were grown on seed layers of ZnO-polyvinyl alcohol (PVA) nanocomposites spin-coated on p-type Si (1 1 1). The nanorod's diameter was found to be dependent on the annealing temperature of the ZnO-PVA seed layer. We produced ZnO nanorods with diameters in the range of 50-300 nm from five groups of seed layers annealed at 250 deg. C, 350 deg. C, 380 deg. C, 450 deg. C, and 550 deg. C. The nanorods were examined with X-ray diffraction, transmission electron microscopy, and field emission scanning electron microscopy, which revealed hexagonal wurtzite structures perpendicular to the substrate along the z-axis in the direction of (0 0 2). Photoluminescence measurements revealed high UV emission at a high I{sub UV}/I{sub vis} ratio of 175. We also conducted Raman scattering studies on the ZnO nanorods to estimate the lattice vibration modes.

  14. Fabricating porous materials using interpenetrating inorganic-organic composite gels

    Science.gov (United States)

    Seo, Dong-Kyun; Volosin, Alex

    2016-06-14

    Porous materials are fabricated using interpenetrating inorganic-organic composite gels. A mixture or precursor solution including an inorganic gel precursor, an organic polymer gel precursor, and a solvent is treated to form an inorganic wet gel including the organic polymer gel precursor and the solvent. The inorganic wet gel is then treated to form a composite wet gel including an organic polymer network in the body of the inorganic wet gel, producing an interpenetrating inorganic-organic composite gel. The composite wet gel is dried to form a composite material including the organic polymer network and an inorganic network component. The composite material can be treated further to form a porous composite material, a porous polymer or polymer composite, a porous metal oxide, and other porous materials.

  15. Lithium-based inorganic-organic framework materials

    OpenAIRE

    Yeung, Hamish Hei-Man

    2013-01-01

    This dissertation describes research into lithium-based inorganic-organic frameworks, which has led to an increased understanding of the structural diversity and properties of these materials. The crystal structures of 11 new forms of lithium tartrate, based on chiral, racemic and meso forms of the ligand, have been discovered, including eight anhydrous isomers of dilithium tartrate, Li2(C4H4O6). An experimental and computational study of their formation behaviour and energetics has shown tha...

  16. Hybrid sols as intermediates to inorganic-organic nanocomposites

    OpenAIRE

    Schmidt, Helmut K.; Oliveira, Peter William de; Krug, Herbert

    1996-01-01

    For the preparation of inorganic-organic hybrid materials, synthesis processes have been developed to fabricate so-called hybrid sols, which contain an inorganic core (ceramic or glass) with nano-scale dimensions surface modified by organic groupings. These groupings have been reacted to the particle surface either by amino functional silanes (e.g. in case of iron oxide nanoparticles for amino group containing silanes) reacting with aliphatic acids to make surfaces ureactive and reduce the pa...

  17. Structural insights into two inorganic-organic hybrids based on chiral amino acids and polyoxomolybdates

    Science.gov (United States)

    Arefian, Mina; Mirzaei, Masoud; Eshtiagh-Hosseini, Hossein

    2018-03-01

    A new chiral inorganic-organic hybrid with the formula (L-His)2(H7CoMo6O24)·6H2O (1), based on natural amino acid and Anderson type polyoxomolybdate was synthesized through mild condition. The chiral L-histidine molecules induced chirality to the whole structure through various types of strong and unconventional hydrogen bond (HB) interactions (CH⋯O, NH⋯O and CH···π interactions), as well as bifurcated hydrogen bonds (BHBs) between L-histidine amino acid, hexamer water cluster molecules, and H7CoMo6O24·xH2O. Following, important non-covalent CH⋯O interactions is investigated in another chiral inorganic-organic hybrid structure, (L-Pro)3(PMo12O40).4.5H2O (2), in detail. The CH⋯O hydrogen bonds lead to a chiral network similar to the DNA strands affording a promising candidate to bio-inorganic studies.

  18. ZnO-nanowires/PANI inorganic/organic heterostructure light-emitting diode.

    Science.gov (United States)

    He, Ying; Wang, Jun-an; Zhang, Wenfei; Song, Jizhong; Pei, Changlong; Chen, Xiaoban

    2010-11-01

    In this paper, we report a flexible inorganic/organic heterostructure light-emitting diode, in which inorganic ZnO nanowires are the optically active components and organic polyaniline (PANI) is the hole-transporting layer. The fabrication of the hybrid LED is as follows, the ordered single-crystalline ZnO nanowires were uniformly distributed on flexible polyethylene terephthalate (PET)-based indium-tin-oxide-coated substrates by our polymer-assisted growth method, and proper materials were chosen as electrode and carrier. In this construction, an array of ZnO nanowires grown on PET substrate is successfully embedded in a polyaniline thin film. The performance of the hybrid device of organic-inorganic hetero-junction of ITO/(ZnO nanowires-PANI) for LED application in the blue and UV ranges are investigated, and tunable electroluminescence has been demonstrated by contacting the upper tips of ZnO nanowires and the PET substrate. The effect of surface capping with polyvinyl alcohol (PANI) on the photocarrier relaxation of the aqueous chemically grown ZnO nanowires has been investigated. The photoluminescence spectrum shows an enhanced ultraviolet emission and reduced defect-related emission in the capped ZnO NWs compared to bare ZnO. The results of our study may offer a fundamental understanding in the field of inorganic/organic heterostructure light-emitting diode, which may be useful for potential applications of hybrid ZnO nanowires with conductive polymers.

  19. Inorganic/Organic Double-Network Gels Containing Ionic Liquids.

    Science.gov (United States)

    Kamio, Eiji; Yasui, Tomoki; Iida, Yu; Gong, Jian Ping; Matsuyama, Hideto

    2017-12-01

    Highly robust ion gels, termed double-network (DN) ion gels, composed of inorganic/organic interpenetrating networks and a large amount of ionic liquids (ILs), are fabricated. The DN ion gels with an 80 wt% IL content show extraordinarily high mechanical strength: more than 28 MPa of compressive fracture stress. In the DN ion gel preparation, a brittle inorganic network of physically bonded silica nanoparticles and a ductile organic network of polydimethylacrylamide (PDMAAm) are formed in the IL. Because of the different reaction mechanisms of the inorganic/organic networks, the DN ion gels can be formed by an easy and free-shapeable one-pot synthesis. They can be prepared in a controllable manner by manipulating the formation order of the inorganic and organic networks via not only multistep but also single-step processes. When silica particles form a network prior to the PDMAAm network formation, DN ion gels can be prepared. The brittle silica particle network in the DN ion gel, serving as sacrificial bonds, easily ruptures under loading to dissipate energy, while the ductile PDMAAm network maintains the shape of the material by the rubber elasticity. Given the reversible physical bonding between the silica particles, the DN ion gels exhibit a significant degree of self-recovery by annealing. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Structure and Plasmonic Properties of Thin PMMA Layers with Ion-Synthesized Ag Nanoparticles

    DEFF Research Database (Denmark)

    Popok, Vladimir; Hanif, Muhammad; Mackova, Anna

    2015-01-01

    Silver nanoparticles are synthesized in polymethylmethacrylate (PMMA) by 30 keV Ag+ ion implantation with high fluences. The implantation is accompanied by structural and compositional evolution of the polymer as well as sputtering. The latter causes towering of the shallow nucleated Ag...... nanoparticles above the surface. The synthesized nanoparticles can be split into two groups: (i) located at the surface and (ii) fully embedded in the shallow layer. These two groups provide corresponding spectral bands related to localized surface plasmon resonance. The bands demonstrate considerable intensity...

  1. {pi}-{pi} Interactions and magnetic properties in a series of hybrid inorganic-organic crystals

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, M.; Lemus-Santana, A.A. [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Unidad Legaria, Instituto Politecnico Nacional, Mexico, D. F. (Mexico); Rodriguez-Hernandez, J. [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Unidad Legaria, Instituto Politecnico Nacional, Mexico, D. F. (Mexico); Instituto de Ciencia y Tecnologia de Materiales, Universidad de La Habana (Cuba); Knobel, M. [Instituto de Fisica ' Gleb Wataghin' , Universidade Estadual de Campinas, SP (Brazil); Reguera, E., E-mail: edilso.reguera@gmail.com [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Unidad Legaria, Instituto Politecnico Nacional, Mexico, D. F. (Mexico)

    2013-01-15

    The series of hybrid inorganic-organic solids T(Im){sub 2}[Ni(CN){sub 4}] with T=Fe, Co, Ni and Im=imidazole were prepared by soft chemical routes from aqueous solutions of the involved building units: imidazole, T{sup 2+} metal and the [Ni(CN){sub 4}]{sup 2-} anionic block. The obtained samples were characterized from infrared and UV-vis spectroscopies, and thermogravimetric, X-ray diffraction and magnetic measurements. Anhydrous solids which crystallize with a monoclinic unit cell, in the I2/a space group with four formula units per cell (Z=4) were obtained. Their crystal structure was solved ab initio from the recorded X-ray powder patterns and then refined by the Rietveld method. The metal T is found with octahedral coordination to four N ends of CN groups and two imidazole molecules while the inner Ni atom preserves its planar coordination. The system of layers remains stacked in an ordered 3D structure through dipole-dipole and {pi}-{pi} interactions between imidazole rings from neighboring layers. In this way, a pillared structure is achieved without requiring the coordination of both nitrogen atoms from imidazole ring. The recorded magnetic data indicate the occurrence of a predominant ferromagnetic interaction at low temperature for Co and Ni but not for Fe. Such magnetic ordering is more favorable for Ni with transition temperature of 14.67 K, which was ascribed to the relatively high polarizing power for this metal. Within the considered T metals, to nickel the highest electron-withdrawing ability corresponds and this leads to an increase for the metal-ligand electron clouds overlapping and to a stronger {pi}-{pi} attractive interaction, two factors that result into a higher magnetic ordering temperature. - Graphical Abstract: Magnetic ordering through the {pi}-{pi} interaction between the imidazole rings. Highlights: Black-Right-Pointing-Pointer Hybrid inorganic-organic solids. Black-Right-Pointing-Pointer Hybrid inorganic-organic molecular based

  2. Computational design of inorganic-organic hybrid materials energy storage and conversion

    Science.gov (United States)

    Kolpak, Alexie

    Hybrid inorganic-organic materials are of interest for the design of new functional materials that combine the advantages of both organic and inorganic components to optimize properties and/or obtain new physical phenomena. In this talk, I will discuss our recent work using first-principles density functional theory to design nanostructured hybrid materials for energy storage and conversion applications. In particular, I will discuss the electronic, optical, thermal, and mechanical properties of a class of nanostructured hybrid materials based on layered transition metal phosphates, showing that these materials offer a highly tunable platform for the design of efficient, flexible photovoltaics and thermoelectrics. In addition to optimizing individual properties, I will also discuss exciting possibilities for using this platform for the design of materials with strong coupling between functionalities.

  3. Synthesis, structure, and transformation studies in a family of inorganic-organic hybrid framework structures based on indium.

    Science.gov (United States)

    Ramaswamy, Padmini; Hegde, Nayana N; Prabhu, Ramanath; Vidya, V M; Datta, Ayan; Natarajan, Srinivasan

    2009-12-21

    Eight new open-framework inorganic-organic hybrid compounds based on indium have been synthesized employing hydrothermal methods. All of the compounds have InO(6), C(2)O(4), and HPO(3)/HPO(4)/SO(4) units connected to form structures of different dimensionality. Thus, the compounds have zero- (I), two- (II, III, IV, V, VII, and VIII), and three-dimensionally (VI) extended networks. The formation of the first zero-dimensional hybrid compound is noteworthy. In addition, concomitant polymorphic structures have been observed in the present study. The molecular compound, I, was found to be reactive, and the transformation studies in the presence of a base (pyridine) give rise to the polymorphic structures of II and III, while the addition of an acid (H(3)PO(3)) gives rise to a new indium phosphite with a pillared layer structure (T1). Preliminary density functional theory calculations suggest that the stabilities of the polymorphs are different, with one of the forms (II) being preferred over the other, which is consistent with the observed experimental behavior. The oxalate units perform more than one role in the present structures. Thus, the oxalate units connect two In centers to satisfy the coordination requirements as well as to achieve charge balance in compounds II, IV, and VI. The terminal oxalate units observed in compounds I, IV, and V suggest the possibility of intermediate structures. Both in-plane and out-of-plane connectivity of the oxalate units were observed in compound VI. The compounds have been characterized by powder X-ray diffraction, IR spectroscopy, thermogravimetric analysis, and (31)P NMR studies.

  4. A novel PLED architecture containing biologically synthesized gold nanoparticles and ultra thin silver layer

    Science.gov (United States)

    Pıravadılı Mucur, Selin; Tekin, Emine; San, Sait Eren; Duygulu, Özgür; Öztürk, Hasan Ümit; Utkan, Güldem; Denizci, Aziz Akın

    2015-09-01

    The influences of biologically synthesized gold nanoparticles (bio-GNPs) and ultra thin silver layer (UTSL) on the polymer light emitting diodes (PLEDs) are investigated for the first time. The performance of the fabricated PLEDs is enhanced by embedding of bio-GNPs into the hole transport layer (HTL). Furthermore, the tailored device architecture containing UTSL increases the electron transport through lightning rod effect. Bio-GNPs are successfully produced as spherical shape with size of circa 10.4 nm. Poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylene vinylene (MEH-PPV) and [poly(3,4-ethylenedioxythiophene):poly (styrenesulfonate); (PEDOT:PSS)/bio-GNPs blends are used as an active layer and HTL, respectively. Novel PLEDs fabricated with 0.125 wt% bio-GNPs/PEDOT:PSS and 0.5 nm UTSL exhibit nearly 2.5-fold enhancement in the device efficiency.

  5. Microwave Synthesized ZnO Nanorod Arrays for UV Sensors: A Seed Layer Annealing Temperature Study

    Directory of Open Access Journals (Sweden)

    Ana Pimentel

    2016-04-01

    Full Text Available The present work reports the influence of zinc oxide (ZnO seed layer annealing temperature on structural, optical and electrical properties of ZnO nanorod arrays, synthesized by hydrothermal method assisted by microwave radiation, to be used as UV sensors. The ZnO seed layer was produced using the spin-coating method and several annealing temperatures, ranging from 100 to 500 °C, have been tested. X-ray diffraction (XRD, scanning electron microscopy (SEM, atomic force microscopy (AFM and spectrophotometry measurements have been used to investigate the structure, morphology, and optical properties variations of the produced ZnO nanorod arrays regarding the seed layer annealing temperatures employed. After the growth of ZnO nanorod arrays, the whole structure was tested as UV sensors, showing an increase in the sensitivity with the increase of seed layer annealing temperature. The UV sensor response of ZnO nanorod arrays produced with the seed layer annealed temperature of 500 °C was 50 times superior to the ones produced with a seed layer annealed at 100 °C.

  6. Study on synthesizing Mg/Al layered double hydroxides at different pHs

    Directory of Open Access Journals (Sweden)

    E Otgonjargal

    2014-12-01

    Full Text Available Mg/Al layered double hydroxide (LDH was successfully synthesized at different pHs values. The Mg/AL LDH was well characterized by X-Ray diffraction and Fourier transform infrared analysis. The morphology of the LDH was observed using Scanning electron microscopy with energy dispersive X-ray spectroscopy. The influence of pH values on the morphology of the Mg/Al LDHs were studied. The result showed that the well-synthesized Mg/Al LDHs could be obtained when the pH value was about 10.0 at room temperature.DOI: http://doi.dx.org/10.5564/mjc.v15i0.319 Mongolian Journal of Chemistry 15 (41, 2014, p36-39

  7. Charge-transfer induced surface conductivity for a copper based inorganic-organic hybrid

    NARCIS (Netherlands)

    Arkenbout, Anne H.; Uemura, Takafumi; Takeya, Jun; Palstra, Thomas T. M.

    2009-01-01

    Inorganic-organic hybrids are receiving increasing attention as they offer the opportunity to combine the robust properties of inorganic materials with the versatility of organic compounds. We have studied the electric properties of an inorganic-organic hybrid with the chemical formula:

  8. TiO2 nanosheets synthesized by atomic layer deposition for photocatalysis

    Directory of Open Access Journals (Sweden)

    Riyanto Edy

    2016-10-01

    Full Text Available Two-dimensional TiO2 nanosheets were synthesized by atomic layer deposition (ALD on dissolvable sacrificial polymer layer. The photocatalytic performance of free-standing TiO2 nanosheets prepared with different numbers of ALD cycles (100, 300, 500, and 1000 were investigated by evaluating the degradation rates of methyl orange solutions. It is shown that the photocatalytic activity increases due to Ti3+ defect and the locally ordered structures in amorphous TiO2 nanosheets. The difference in the surface areas of nanosheets may also play a crucial role in the photocatalytic activity. The results obtained in this work can have potential applications in fields like water splitting and dye-sensitized solar cells.

  9. Layered SnS sodium ion battery anodes synthesized near room temperature

    KAUST Repository

    Xia, Chuan

    2017-08-10

    In this report, we demonstrate a simple chemical bath deposition approach for the synthesis of layered SnS nanosheets (typically 6 nm or ~10 layers thick) at very low temperature (40 °C). We successfully synthesized SnS/C hybrid electrodes using a solution-based carbon precursor coating with subsequent carbonization strategy. Our data showed that the ultrathin carbon shell was critical to the cycling stability of the SnS electrodes. As a result, the as-prepared binder-free SnS/C electrodes showed excellent performance as sodium ion battery anodes. Specifically, the SnS/C anodes delivered a reversible capacity as high as 792 mAh·g−1 after 100 cycles at a current density of 100 mA·g−1. They also had superior rate capability (431 mAh·g−1 at 3,000 mA·g−1) and stable long-term cycling performance under a high current density (345 mAh·g−1 after 500 cycles at 3 A·g−1). Our approach opens up a new route to synthesize SnS-based hybrid materials at low temperatures for energy storage and other applications. Our process will be particularly useful for chalcogenide matrix materials that are sensitive to high temperatures during solution synthesis.

  10. Inorganic-organic thin implant coatings deposited by lasers.

    Science.gov (United States)

    Sima, Felix; Davidson, Patricia M; Dentzer, Joseph; Gadiou, Roger; Pauthe, Emmanuel; Gallet, Olivier; Mihailescu, Ion N; Anselme, Karine

    2015-01-14

    The lifetime of bone implants inside the human body is directly related to their osseointegration. Ideally, future materials should be inspired by human tissues and provide the material structure-function relationship from which synthetic advanced biomimetic materials capable of replacing, repairing, or regenerating human tissues can be produced. This work describes the development of biomimetic thin coatings on titanium implants to improve implant osseointegration. The assembly of an inorganic-organic biomimetic structure by UV laser pulses is reported. The structure consists of a hydroxyapatite (HA) film grown onto a titanium substrate by pulsed-laser deposition (PLD) and activated by a top fibronectin (FN) coating deposited by matrix-assisted pulsed laser evaporation (MAPLE). A pulsed KrF* laser source (λ = 248 nm, τ = 25 ns) was employed at fluences of 7 and 0.7J/cm(2) for HA and FN transfer, respectively. Films approximately 1500 and 450 nm thick were obtained for HA and FN, respectively. A new cryogenic temperature-programmed desorption mass spectrometry analysis method was employed to accurately measure the quantity of immobilized protein. We determined that less than 7 μg FN per cm(2) HA surface is adequate to improve adhesion, spreading, and differentiation of osteoprogenitor cells. We believe that the proposed fabrication method opens the door to combining and immobilizing two or more inorganic and organic materials on a solid substrate in a well-defined manner. The flexibility of this method enables the synthesis of new hybrid materials by simply tailoring the irradiation conditions according to the thermo-physical properties of the starting materials.

  11. Two Types of 2D Layered Iodoargentates Based on Trimeric [Ag3I7] Secondary Building Units and Hexameric [Ag6I12] Ternary Building Units: Syntheses, Crystal Structures, and Efficient Visible Light Responding Photocatalytic Properties.

    Science.gov (United States)

    Lei, Xiao-Wu; Yue, Cheng-Yang; Zhao, Jian-Qiang; Han, Yong-Fang; Yang, Jiang-Tao; Meng, Rong-Rong; Gao, Chuan-Sheng; Ding, Hao; Wang, Chun-Yan; Chen, Wan-Dong; Hong, Mao-Chun

    2015-11-16

    With mixed transition-metal-complex, alkali-metal, or organic cations as structure-directing agents, a series of novel two-dimensional (2D) layered inorganic-organic hybrid iodoargentates, namely, Kx[TM(2,2-bipy)3]2Ag6I11 (TM = Mn (1), Fe (2), Co (3), Ni (4), Zn (5); x = 0.89-1) and [(Ni(2,2-bipy)3][H-2,2-bipy]Ag3I6 (6), have been solvothermally synthesized and structurally characterized. All the title compounds feature 2D microporous layers composed by [Ag3I7] secondary building units based on AgI4 tetrahedra. Differently, the [Ag3I7] trimers are directly interconnected via corner-sharing to form the 2D [Ag6I11](5-) layer in compounds 1-5, whereas two neighboring [Ag3I7] trimers are initially condensed into a hexameric [Ag6I12] ternary building unit as a new node, which further self-assembles, leading to the 2D [Ag6I10](4-) layer in compound 6. The UV-vis diffuse-reflectance measurements reveal that all the compounds possess proper semiconductor behaviors with tunable band gaps of 1.66-2.75 eV, which lead to highly efficient photocatalytic degradation activities over organic pollutants under visible light irradiation compared to that of N-dotted P25. Interestingly, all the samples feature distinct photodegradative speeds at the same reaction conditions, and compound 1 features the highest photocatalytic activity among the title phases. The luminescence properties, band structures, and thermal stabilities were also studied.

  12. New inorganic-organic proton conducting membranes based on Nafion and hydrophobic fluoroalkylated silica nanoparticles

    Science.gov (United States)

    Di Noto, Vito; Boaretto, Nicola; Negro, Enrico; Pace, Giuseppe

    In this report, a new nanofiller consisting of silica "cores" bearing fluoroalkyl surface functionalities is synthesized and adopted in the preparation of a series of hybrid inorganic-organic proton conducting membranes based on Nafion. The hybrid materials are obtained by a solvent-casting procedure and include between 0 and 10 wt.% of nanofiller. The resulting systems are extensively characterized by Thermogravimetry (TG), Modulated Differential Scanning Calorimetry (MDSC) and Dynamic Mechanical Analysis (DMA), showing that the hybrid materials are stable up to 240 °C and that their overall thermal and mechanical properties are affected both by the polar groups on the surface of the silica "cores" and by the fluoroalkyl surface functionalities of the nanofiller. The electric properties of the hybrid materials are investigated by broadband dielectric spectroscopy (BDS). It is shown that proton conductivity of the materials is not compromised by the lower water uptake arising from the hydrophobic character of the nanofiller. With respect to a pristine Nafion recast membrane, the hybrid material characterized by 5 wt.% of nanofiller, [Nafion/(Si 80F) 0.7], shows the highest conductivity in all the investigated temperature range (5 ≤ T ≤ 155 °C). Indeed, [Nafion/(Si 80F) 0.7] features the lowest water uptake and presents a conductivity of 0.083 S cm -1 at 135 °C. This result is consistent with the good performance of the membrane in single fuel cell tests.

  13. Intercomparison and validation of the mixed layer depth fields of global ocean syntheses

    Science.gov (United States)

    Toyoda, Takahiro; Fujii, Yosuke; Kuragano, Tsurane; Kamachi, Masafumi; Ishikawa, Yoichi; Masuda, Shuhei; Sato, Kanako; Awaji, Toshiyuki; Hernandez, Fabrice; Ferry, Nicolas; Guinehut, Stéphanie; Martin, Matthew J.; Peterson, K. Andrew; Good, Simon A.; Valdivieso, Maria; Haines, Keith; Storto, Andrea; Masina, Simona; Köhl, Armin; Zuo, Hao; Balmaseda, Magdalena; Yin, Yonghong; Shi, Li; Alves, Oscar; Smith, Gregory; Chang, You-Soon; Vernieres, Guillaume; Wang, Xiaochun; Forget, Gael; Heimbach, Patrick; Wang, Ou; Fukumori, Ichiro; Lee, Tong

    2017-08-01

    Intercomparison and evaluation of the global ocean surface mixed layer depth (MLD) fields estimated from a suite of major ocean syntheses are conducted. Compared with the reference MLDs calculated from individual profiles, MLDs calculated from monthly mean and gridded profiles show negative biases of 10-20 m in early spring related to the re-stratification process of relatively deep mixed layers. Vertical resolution of profiles also influences the MLD estimation. MLDs are underestimated by approximately 5-7 (14-16) m with the vertical resolution of 25 (50) m when the criterion of potential density exceeding the 10-m value by 0.03 kg m-3 is used for the MLD estimation. Using the larger criterion (0.125 kg m-3) generally reduces the underestimations. In addition, positive biases greater than 100 m are found in wintertime subpolar regions when MLD criteria based on temperature are used. Biases of the reanalyses are due to both model errors and errors related to differences between the assimilation methods. The result shows that these errors are partially cancelled out through the ensemble averaging. Moreover, the bias in the ensemble mean field of the reanalyses is smaller than in the observation-only analyses. This is largely attributed to comparably higher resolutions of the reanalyses. The robust reproduction of both the seasonal cycle and interannual variability by the ensemble mean of the reanalyses indicates a great potential of the ensemble mean MLD field for investigating and monitoring upper ocean processes.

  14. New polymer lithium secondary batteries based on ORMOCER (R) electrolytes-inorganic-organic polymers

    DEFF Research Database (Denmark)

    Popall, M.; Buestrich, R.; Semrau, G.

    2001-01-01

    Based on new plasticized inorganic-organic polymer electrolytes CM. Popall, M. Andrei, J. Kappel, J. Kron, K. Olma, B. Olsowski,'ORMOCERs as Inorganic-organic Electrolytes for New Solid State Lithium Batteries and Supercapacitors', Electrochim. Acta 43 (1998) 1155] new flexible foil-batteries in ......Based on new plasticized inorganic-organic polymer electrolytes CM. Popall, M. Andrei, J. Kappel, J. Kron, K. Olma, B. Olsowski,'ORMOCERs as Inorganic-organic Electrolytes for New Solid State Lithium Batteries and Supercapacitors', Electrochim. Acta 43 (1998) 1155] new flexible foil......-batteries in 'coffee bag arrangement' were assembled and tested. The electrolyte works as separator and binder for the cathodes. Self-diffusion NMR studies on the system (EC/PC/Li+N(SO2CF3)(2)(-)/ORMOCER(R)) resulted in cationic transport numbers t(+)) of 0.42 for the EC/PC/salt system and 0.35 for the ternary...

  15. Inorganic/organic nanocomposites: Reaching a high filler content without increasing viscosity using core-shell structured nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Benhadjala, W., E-mail: warda.benhadjala@cea.fr [IMS Laboratory - UMR CNRS 5218, University of Bordeaux, 351 Cours de la Libération, 33405 Talence (France); CEA, LETI, Minatec Campus, 38000 Grenoble (France); Gravoueille, M.; Weiss, M. [EDF, Centre d' Expertise et d' Inspection dans les Domaines de la Réalisation et de l' Exploitation (CEIDRE), Chinon, BP 80, 37420 Avoine (France); Bord-Majek, I.; Béchou, L.; Ousten, Y. [IMS Laboratory - UMR CNRS 5218, University of Bordeaux, 351 Cours de la Libération, 33405 Talence (France); Suhir, E. [Maseeh College of Engineering and Computer Science, Portland State University, Oregon 97201 (United States); Buet, M.; Louarn, M.; Rougé, F.; Gaud, V. [Polyrise SAS, 16 Avenue Pey Berland, 33607 Pessac (France)

    2015-11-23

    Extensive research is being conducted on the development of inorganic/organic nanocomposites for a wide variety of applications in microelectronics, biotechnologies, photonics, adhesives, or optical coatings. High filler contents are usually required to fully optimize the nanocomposites properties. However, numerous studies demonstrated that traditional composite viscosity increases with increasing the filler concentration reducing therefore significantly the material processability. In this work, we synthesized inorganic/organic core-shell nanocomposites with different shell thicknesses. By reducing the shell thickness while maintaining a constant core size, the nanoparticle molecular mass decreases but the nanocomposite filler fraction is correlatively increased. We performed viscosity measurements, which clearly highlighted that intrinsic viscosity of hybrid nanoparticles decreases as the molecular mass decreases, and thus, as the filler fraction increases, as opposed to Einstein predictions about the viscosity of traditional inorganic/polymer two-phase mixtures. This exceptional behavior, modeled by Mark-Houwink-Sakurada equation, proves to be a significant breakthrough for the development of industrializable nanocomposites with high filler contents.

  16. Inorganic/organic nanocomposites: Reaching a high filler content without increasing viscosity using core-shell structured nanoparticles

    Science.gov (United States)

    Benhadjala, W.; Gravoueille, M.; Bord-Majek, I.; Béchou, L.; Suhir, E.; Buet, M.; Louarn, M.; Weiss, M.; Rougé, F.; Gaud, V.; Ousten, Y.

    2015-11-01

    Extensive research is being conducted on the development of inorganic/organic nanocomposites for a wide variety of applications in microelectronics, biotechnologies, photonics, adhesives, or optical coatings. High filler contents are usually required to fully optimize the nanocomposites properties. However, numerous studies demonstrated that traditional composite viscosity increases with increasing the filler concentration reducing therefore significantly the material processability. In this work, we synthesized inorganic/organic core-shell nanocomposites with different shell thicknesses. By reducing the shell thickness while maintaining a constant core size, the nanoparticle molecular mass decreases but the nanocomposite filler fraction is correlatively increased. We performed viscosity measurements, which clearly highlighted that intrinsic viscosity of hybrid nanoparticles decreases as the molecular mass decreases, and thus, as the filler fraction increases, as opposed to Einstein predictions about the viscosity of traditional inorganic/polymer two-phase mixtures. This exceptional behavior, modeled by Mark-Houwink-Sakurada equation, proves to be a significant breakthrough for the development of industrializable nanocomposites with high filler contents.

  17. Inorganic-organic hydrogel scaffolds for tissue engineering

    Science.gov (United States)

    Bailey, Brennan Margaret

    Analogous to the extracellular matrix (ECM) of natural tissues, properties of a tissue engineering scaffold direct cell behavior and thus regenerated tissue properties. These include both physical properties (e.g. morphology and modulus) and chemical properties (e.g. hydrophobicity, hydration and bioactivity). Notably, recent studies suggest that scaffold properties (e.g. modulus) may be as potent as growth factors in terms of directing stem cell fate. Thus, 3D scaffolds possessing specific properties modified for optimal cell regeneration have the potential to regenerate native-like tissues. Photopolymerizable poly(ethylene glycol) diacrylate (PEG-DA)-based hydrogels are frequently used as scaffolds for tissue engineering. They are ideal for controlled studies of cell-material interactions due to their poor protein adsorption in the absence of adhesive ligands thereby making them "biological blank slates". However, their range of physical and chemical properties is limited. Thus, hydrogel scaffolds which maintain the benefits of PEG-DA but possess a broader set of tunable properties would allow the establishment of predictive relationships between scaffold properties, cell behavior and regenerated tissue properties. Towards this goal, this work describes a series of unique hybrid inorganic-organic hydrogel scaffolds prepared using different solvents and also in the form of continuous gradients. Properties relevant to tissue regeneration were investigated including: swelling, morphology, modulus, degradation rates, bioactivity, cytocompatibility, and protein adhesion. These scaffolds were based on the incorporation of hydrophobic, bioactive and osteoinductive methacrylated star polydimethylsiloxane (PDMSstar-MA) ["inorganic component"] into hydrophilic PEG-DA ["organic component"]. The following parameters were varied: molecular weight (Mn) of PEG-DA (Mn = 3k & 6k g/mol) and PDMSstar-MA (Mn = 1.8k, 7k, 14k), ratio of PDMSstar-MA to PEG-DA (0:100 to 20:80), total

  18. Syntheses and structures of uranyl ethylenediphosphonates: from layers to elliptical nanochannels.

    Science.gov (United States)

    Tian, Tao; Yang, Weiting; Wang, Hao; Dang, Song; Pan, Qing-Jiang; Sun, Zhong-Ming

    2013-06-17

    A family of uranium diphosphonates have been hydrothermally synthesized through the reaction of ethylenediphosphonic acid (EDP, H4L) and uranyl nitrate/zinc uranyl acetate in the presence of organic templates, such as tetraethyl ammonium (NEt4(+)), 4,4'-bipyridine (bipy), and 1,10-phenanthroline (phen). The UO2(2+) in UO2(H2O)(H2L)(EDP-U1) is equatorially five-coordinated by four phosphonate groups and one aqua ligand, forming a pentagonal bipyramid. Each EDP ligand is doubly protonated and chelates three UO2(2+), resulting in a layered structure. Compounds (NEt4)2(UO2)3(HL)2(H2L)·4H2O (EDP-U2) and (H2bipy)UO2L (EDP-U3) have the same layered structure in which NEt4(+) and protonated bipy fill in the uranyl-phosphonate interlayers, respectively, and play a role to balance the negative charges. Different from that in EDP-U1, the UO2(2+) exists in the form of a UO6 tetragonal bipyramid and is surrounded by four different EDP ligands in EDP-U2 and EDP-U3. (Hphen)2(UO2)2(H2L)3 (EDP-U4) features a three-dimensional framework structure with large elliptical channels along the c axis (1.3 × 1.1 nm(2)). Monoprotonated phen molecules fill in these channels and hold together through strong π···π interactions. All of the four compounds have been characterized by IR and photoluminescent spectroscopy. Their characteristic emissions have been attributed as transition properties of uranyl cations. The ion-exchange study indicates that [Co(en)3](3+) could partially replace the protonated phen molecules.

  19. Copper inorganic-organic hybrid coordination compound as a novel ...

    Indian Academy of Sciences (India)

    Keywords. Pyridine-2,6-dicarboxylic acid; Crystal structure; Dinuclear complex; Electrocatalysis; Impedance spectroscopy. Abstract. Dinuclear coordination compound of Cu(II), namely, [Cu2(pydc)2(pz)(H2O)2]·2H2O, where pydc = pyridine-2,6-dicarboxylic acid (dipicolinic acid) and pz = pyrazine has been synthesized and ...

  20. Inorganic-organic composites (ORMOCERs) for optical application

    OpenAIRE

    Schmidt, Helmut K.; Popall, Michael

    1990-01-01

    Organically modified ceramics (ORMOCERs) have been prepared with respect to optical applications. The investigations show that materials can be synthesized with interesting properties for a variety of potential applications. They can be used as hard coatings for the protection of optical polymers, e.g. CR 39 or fluorescent dye containing PMMA. The incorporation of dyes leads to active optical matrices, e.g. fluorescent coatings and the introduction of components with high refractive increment...

  1. Fast Response, vertically oriented graphene nanosheet electric double layer capacitors synthesized from C(2)H(2).

    Science.gov (United States)

    Cai, Minzhen; Outlaw, Ronald A; Quinlan, Ronald A; Premathilake, Dilshan; Butler, Sue M; Miller, John R

    2014-06-24

    The growth and electrical characteristics of vertically oriented graphene nanosheets grown by radio frequency plasma-enhanced chemical vapor deposition from C2H2 feedstock on nickel substrates and used as electrodes in symmetric electric double layer capacitors (EDLC) are presented. The nanosheets exhibited 2.7 times faster growth rate and much greater specific capacitance for a given growth time than CH4 synthesized films. Raman spectra showed that the intensity ratio of the D band to G band versus temperature initially decreased to a minimum value of 0.45 at a growth temperature of 750 °C, but increased rapidly with further temperature increase (1.15 at 850 °C). The AC specific capacitance at 120 Hz of these EDLC devices increased in a linear fashion with growth temperature, up to 265 μF/cm(2) (2 μm high film, 850 °C with 10 min growth). These devices exhibited ultrafast frequency response: the frequency response at -45° phase angle reached over 20 kHz. Consistent with the increase in D band to G band ratio, the morphology of the films became less vertical, less crystalline, and disordered at substrate temperatures of 800 °C and above. This deterioration in morphology resulted in an increase in graphene surface area and defect density, which, in turn, contributed to the increased capacitance, as well as a slight decrease in frequency response. The low equivalent series resistance varied from 0.07 to 0.08 Ω and was attributed to the significant carbon incorporation into the Ni substrate.

  2. Interfacial Effects and Organization of Inorganic-Organic Composite Solids.

    Science.gov (United States)

    1998-05-20

    FRANCE; Jean-Marc Fabre, Univ de Montpellier II, Lab de Chimie Organique Structurale, Montpellier, FRANCE Layered metal (IV) hydrogen phosphatei (forms...Fluid Laboratory, Cranbury, NJ; Clement Sanchez, Univ Pierre et Mane Curie, Chimie de la Mauere Condensee, Paris, FRANCE Hydrolysis and condensation...of Geosciences, Pnnceton, NJ; Mohamed Haouas, Univ Louis Pasteur, RMN et Chimie du Solide. Strasbourg. FRANCE; Francis B. L. Taulelle, Univ Louis

  3. Inorganic-organic p-n heterojunction nanotree arrays for a high-sensitivity diode humidity sensor.

    Science.gov (United States)

    Wang, Ke; Qian, Xuemin; Zhang, Liang; Li, Yongjun; Liu, Huibiao

    2013-06-26

    Large-area and ordered arrays (16 cm(2)) of an inorganic-organic p-n heterojunction nanotree (NT) were successfully fabricated. The nanotree arrays consist of ZnO nanorods (NRs) as backbones and CuTCNQ (TCNQ = 7,7,8,8-tetracyanoquinodimethane) NRs as branches. The sizes of CuTCNQ NRs can be tuned by the thickness of the Cu layer deposited on the surface of ZnO NR. The CuTCNQ/ZnO NT arrays displayed excellent diode nature and obvious size-dependent rectification ratios were observed. Moreover, the CuTCNQ/ZnO NT arrays were first applied for the fabrication of a diode-type humidity sensor, which displayed ultrahigh sensitivity and quick response/recovery properties at room temperature. The detection limitation of this new diode-type humidity sensor lowers to 5% relative humidity (RH).

  4. Atomic layer deposition of titanium oxide films on As-synthesized magnetic Ni particles: Magnetic and safety properties

    Energy Technology Data Exchange (ETDEWEB)

    Uudeküll, Peep, E-mail: peep.uudekull@ut.ee [Institute of Physics, University of Tartu, W. Ostwaldi Str.1, 50411 Tartu (Estonia); Kozlova, Jekaterina; Mändar, Hugo [Institute of Physics, University of Tartu, W. Ostwaldi Str.1, 50411 Tartu (Estonia); Link, Joosep [Laboratory of Chemical Physics, National Institute of Chemical Physics and Biophysics, Akadeemia tee 23, 12618 Tallinn (Estonia); Sihtmäe, Mariliis [Laboratory of Environmental Toxicology, National Institute of Chemical Physics and Biophysics, Akadeemia tee 23, 12618 Tallinn (Estonia); Käosaar, Sandra [Laboratory of Environmental Toxicology, National Institute of Chemical Physics and Biophysics, Akadeemia tee 23, 12618 Tallinn (Estonia); Faculty of Chemical and Materials Technology, Tallinn University of Technology, Ehitajate tee 5, 19086 Tallinn (Estonia); Blinova, Irina; Kasemets, Kaja; Kahru, Anne [Laboratory of Environmental Toxicology, National Institute of Chemical Physics and Biophysics, Akadeemia tee 23, 12618 Tallinn (Estonia); Stern, Raivo [Laboratory of Chemical Physics, National Institute of Chemical Physics and Biophysics, Akadeemia tee 23, 12618 Tallinn (Estonia); Tätte, Tanel [Institute of Physics, University of Tartu, W. Ostwaldi Str.1, 50411 Tartu (Estonia); Kukli, Kaupo [Institute of Physics, University of Tartu, W. Ostwaldi Str.1, 50411 Tartu (Estonia); University of Helsinki, Department of Chemistry, P.O. Box 55, FI-00014 Helsinki (Finland); Tamm, Aile [Institute of Physics, University of Tartu, W. Ostwaldi Str.1, 50411 Tartu (Estonia)

    2017-05-01

    Spherical nickel particles with size in the range of 100–400 nm were synthesized by non-aqueous liquid phase benzyl alcohol method. Being developed for magnetically guided biomedical applications, the particles were coated by conformal and antimicrobial thin titanium oxide films by atomic layer deposition. The particles retained their size and crystal structure after the deposition of oxide films. The sensitivity of the coated particles to external magnetic fields was increased compared to that of the uncoated powder. Preliminary toxicological investigations on microbial cells and small aquatic crustaceans revealed non-toxic nature of the synthesized particles.

  5. Shell Layer Thickness-Dependent Photocatalytic Activity of Sputtering Synthesized Hexagonally Structured ZnO-ZnS Composite Nanorods.

    Science.gov (United States)

    Liang, Yuan-Chang; Lo, Ya-Ru; Wang, Chein-Chung; Xu, Nian-Cih

    2018-01-07

    ZnO-ZnS core-shell nanorods are synthesized by combining the hydrothermal method and vacuum sputtering. The core-shell nanorods with variable ZnS shell thickness (7-46 nm) are synthesized by varying ZnS sputtering duration. Structural analyses demonstrated that the as-grown ZnS shell layers are well crystallized with preferring growth direction of ZnS (002). The sputtering-assisted synthesized ZnO-ZnS core-shell nanorods are in a wurtzite structure. Moreover, photoluminance spectral analysis indicated that the introduction of a ZnS shell layer improved the photoexcited electron and hole separation efficiency of the ZnO nanorods. A strong correlation between effective charge separation and the shell thickness aids the photocatalytic behavior of the nanorods and improves their photoresponsive nature. The results of comparative degradation efficiency toward methylene blue showed that the ZnO-ZnS nanorods with the shell thickness of approximately 17 nm have the highest photocatalytic performance than the ZnO-ZnS nanorods with other shell layer thicknesses. The highly reusable catalytic efficiency and superior photocatalytic performance of the ZnO-ZnS nanorods with 17 nm-thick ZnS shell layer supports their potential for environmental applications.

  6. Evolution of Structural-Phase States in TiNi Surface Layers Synthesized by Electron Beam Treatment

    Directory of Open Access Journals (Sweden)

    L. L. Meisner

    2010-01-01

    Full Text Available The paper presents the results of X-ray diffraction analysis of nonequilibrium structural and elastic stress states in TiNi surface layers irradiated by low-energy electron beams. It is found that a surface layer with a mixed (2D columnar and 3D equiaxial submicrocrystalline structure is formed on the irradiated side of the TiNi specimens, and the volume fractions of the two structure types depend on the beam energy parameters and number of pulses. The B2 phase synthesized in the layer is characterized by lattice microstrain due to stresses of the first and second kinds (εI≈±1%, εII=0.25%, and the layer as such is an internal stress concentrator for underlying layers of the material. In the intermediate layer beneath the stress concentrator, relaxation of irradiation-induced internal stress takes place. It is shown that the main mechanism of the relaxation is partial B2→B19′ martensite transformation. The B19′ martensite phase in the intermediate layer decreases the microstrain in the conjugate B2 phase. The thickness of the layer in which the relaxation processes develop through the B2→B19′ martensite transformation is 10–15 μm.

  7. Structure Determination of New Layered Perovskite Compound, NaLaTa2O7, Synthesized by Ion-Exchange Reaction

    OpenAIRE

    Toda, Kenji; Uematsu, Kazuyoshi; Sato, Mineo; 戸田, 健司; 上松, 和義; 佐藤, 峰夫

    1997-01-01

    A new layered perovskite compound, NaLaTa2O7, was synthesized by ion-exchange reaction of the rubidium compound, RbLaTa2O7. The crystal structure of the compound was determined by the Rietveld analysis for powder X-ray diffraction pattern. The crystal structure is analogous to that of the corresponding niobate compound, NaLaNb2O7. This layered perovskite compound is a new member of the Dion-Jacobson series with n=2 for the general formula M[An-1BnO3n+1] (M=alkali metals).

  8. Charge transport in bottom-up inorganic-organic and quantum-coherent nanostructures

    NARCIS (Netherlands)

    Makarenko, K.S.

    2015-01-01

    This thesis is based on results obtained from experiments designed for a consistent study of charge transport in bottom-up inorganic-organic and quantum-coherent nanostructures. New unconventional ways to build elements of electrical circuits (like dielectrophoresis, wedging transfer and bottom-up

  9. Inorganic-Organic Molecules and Solids with Nanometer-Sized Pores

    Energy Technology Data Exchange (ETDEWEB)

    Maverick, Andrew W

    2011-12-17

    We are constructing porous inorganic-organic hybrid molecules and solids, many of which contain coordinatively unsaturated metal centers. In this work, we use multifunctional ²-diketone ligands as building blocks to prepare extended-solid and molecular porous materials that are capable of reacting with a variety of guest molecules.

  10. Porous layered double hydroxides synthesized using oxygen generated by decomposition of hydrogen peroxide

    NARCIS (Netherlands)

    Gonzalez Rodriguez, P.; de Ruiter, M.P.; Wijnands, Tom; ten Elshof, Johan E.

    2017-01-01

    Porous magnesium-aluminium layered double hydroxides (LDH) were prepared through intercalation and decomposition of hydrogen peroxide (H2O2). This process generates oxygen gas nano-bubbles that pierce holes in the layered structure of the material by local pressure build-up. The decomposition of the

  11. Facile synthesis of photoluminescent inorganic-organic hybrid carbon dots codoped with B and N: towards an efficient lubrication additive.

    Science.gov (United States)

    Zhang, Yunxiao; Cai, Tao; Shang, Wangji; Liu, Dan; Guo, Qiang; Liu, Shenggao

    2017-09-28

    A novel environmentally friendly bis-functional dicationic ionic liquid containing chelated orthoborate was synthesized and polycondensed with glutamic acid in order to synthesize inorganic-organic carbon dots (CD/IL) consisting of an ionic liquid moiety inserted in the carbon skeleton. The obtained CD/IL was found to be a new kind of nitrogen/boron-codoped nanomaterial, one with a mean particle diameter of 2.66 nm. CD/IL was verified to be a high-performance lubricant additive: in particular, the anti-wear and friction-reducing properties of poly(ethylene glycol) (PEG) were improved by 89.34% and 62.18%, respectively, when 1% CD/IL was added. Lubricants consisting of a mixture of CD/IL and PEG showed intense blue photo-fluorescence, and the corresponding photoluminescence (PL) intensity decreased considerably after carrying out a tribo-test. Moreover, CD/IL became transferred onto a rubbing steel interface during the tribo-test according to EDX and Raman analyses of a worn surface. CD/IL showed poor crystallinity, and interestingly, an intense G (∼1600 cm-1) signature was detected on the steel surface after a high-load and long-duration tribo-test, which indicated that ordered carbon materials were generated on the interface, inhibiting the undesirable wear.

  12. Characterization of Transition Metal Carbide Layers Synthesized by Thermo-reactive Diffusion Processes

    DEFF Research Database (Denmark)

    Laursen, Mads Brink; Fernandes, Frederico Augusto Pires; Christiansen, Thomas Lundin

    2015-01-01

    be transformed into a layer much richer in Cr7C3 and poorer in Cr23C6 by a subsequent heat treatment. The produced chromium-, vanadium- and titanium carbide layers have hardness values of 2116±37HV, 3022±119HV and 3951±66HV respectively, and subsequent hardening and tempering of treated materials can be done......Hard wear resistant surface layers of transition metal carbides can be produced by thermo-reactive diffusion processes where interstitial elements from a steel substrate together with external sources of transition metals (Ti, V, Cr etc.) form hard carbide and/or nitride layers at the steel surface....... In this study halide-activated pack cementation techniques were used on tool steel Vanadis 6 and martensitic stainless steel AISI 420 in order to produce hard layers of titanium carbide (TiC), vanadium carbide (V8C7) and chromium carbides (Cr23C6 and Cr7C3). Surface layers were characterized by scanning...

  13. Hydrothermal synthesis and structural characterization of the (C(n)H(2n+6)N(2)[Mn(3)(HPO(3))4] (n = 3-8) new layered inorganic-organic hybrid manganese(II) phosphites. Crystal structure and spectroscopic and magnetic properties of (C(3)H(12)N(2)[Mn(3)(HPO(3))4].

    Science.gov (United States)

    Fernández, S; Pizarro, J L; Mesa, J L; Lezama, L; Arriortua, M I; Olazcuaga, R; Rojo, T

    2001-07-02

    The (C(n)H(2n+6)N(2))[Mn(3)(HPO(3))(4)] (n = 3-8) compounds have been prepared by hydrothermal synthesis and characterized by X-ray diffraction data and spectroscopic techniques. The crystal structure of (C(3)H(12)N(2))[Mn(3)(HPO(3))(4)] has been solved from single-crystal X-ray diffraction. The unit-cell parameters are a = 9.502(1), b = 5.472(1), c = 14.523(4) A, beta = 95.01(3) degrees, monoclinic, C2/m, with Z = 2. The compound shows a layered structure stacked along the c-axis with the alkyldiammonium cations placed in the interlayer space. The sheets are formed by Mn(3)O(12) trimer units extended in the ab-plane and connected by (HPO(3))(2-) anions. The study of the (C(n)H(2n+6)N(2))[Mn(3)(HPO(3))(4)] (n = 4-8) phases by X-ray powder diffraction indicates an isotype relation with the propanediammonium compound. The Dq and Racah parameters calculated for (C(3)H(12)N(2))[Mn(3)(HPO(3))(4)] are Dq = 880, B = 660 and C = 3610 cm(-1). The ESR spectra show isotropic signals with a g-value of 2.008. Magnetic measurements indicate the presence of antiferromagnetic interactions inside the [Mn(3)(HPO(3))(4)](2-) sheets. The J/K value has been estimated to be -15 K by considering that the system behaves like an isolated trimer at high temperatures.

  14. Applications versus properties of Mg–Al layered double hydroxides provided by their syntheses methods: Alkoxide and alkoxide-free sol–gel syntheses and hydrothermal precipitation

    KAUST Repository

    Chubar, Natalia

    2013-12-01

    A tremendous number of studies have examined layered double hydroxides (LDH) for their technological applications in the ion exchange removal of toxic ions, recovery of valuable substances, catalysis, CO2 capture, as a layered host for storage/delivery of biologically active molecules, additives to plastics and building materials, and other functions. Numerous publications always conclude that the materials (prepared, as a rule, using the oldest synthesis method) are very promising for each investigated application; however, the main chemical industries producing these materials advertise them mainly (or only) as plastic additives. The authors performed extensive research using many of the appropriate methods to compare the structure, surface and adsorptive properties of three Mg-Al LHDs produced by advanced synthesis methods. One industrial sample (by Sasol, Germany) prepared by the alkoxide sol-gel method and two novel Mg-Al LDHs synthesised in-house by alkoxide-free sol-gel and hydrothermal precipitation approaches were investigated. Reasons for the very different adsorptive selectivity of the three LDHs towards arsenate, selenate, phosphate, arsenite and selenite have been provided, highlighting the role of speciation of the interlayer carbonate, aluminium, magnesium, interlayer hydration and moisture content in the adsorptive selectivity towards each toxic anion. This work is the first report presenting the regularities of the LDHs structure, surface and anion exchange properties as a function of their syntheses method. It establishes the links to potential technological applications of each investigated LDH and explains the necessary properties required to make the technological application cost-effective and efficient. The paper might accelerate industrial applications of these advanced materials. © 2013 Elsevier B.V.

  15. Structure and Electronic Properties of In Situ Synthesized Single-Layer MoS2 on a Gold Surface

    DEFF Research Database (Denmark)

    Sørensen, Signe Grønborg; Füchtbauer, Henrik Gøbel; Tuxen, Anders Kyrme

    2014-01-01

    of the band structure due to confinement in the direction perpendicular to the sheets, and there is a considerable interest in understanding how this modification can be controlled and adjusted to generate 2D-materials with functional properties. In this article we report a synthesis procedure together...... with scanning tunneling microscopy and X-ray photoelectron spectroscopy characterization of two-dimensional single-layer islands of MoS2 synthesized directly on a gold single crystal substrate. Thanks to a periodic modulation of the atom stacking induced by the lattice mismatch, we observe a structural buckling...

  16. Improved, low cost inorganic-organic separators for rechargeable silver-zinc batteries

    Science.gov (United States)

    Sheibley, D. W.

    1979-01-01

    Several flexible, low-cost inorganic-organic separators with performance characteristics and cycle life equal to, or better than, the Lewis Research Center Astropower separator were developed. These new separators can be made on continuous-production equipment at about one-fourth the cost of the Astropower separator produced the same way. In test cells, these new separators demonstrate cycle life improvement, acceptable operating characteristics, and uniform current density. The various separator formulas, test cell construction, and data analysis are described.

  17. Atomic layer deposition synthesized TiO{sub x} thin films and their application as microbolometer active materials

    Energy Technology Data Exchange (ETDEWEB)

    Tanrikulu, Mahmud Yusuf, E-mail: mytanrikulu@adanabtu.edu.tr [Department of Electrical-Electronics Engineering, Adana Science and Technology University, Adana 01180 (Turkey); Rasouli, Hamid Reza [Institute of Materials Science and Nanotechnology, Bilkent University, Ankara 06800 (Turkey); Ghaffari, Mohammad [National Nanotechnology Research Center (UNAM), Bilkent University, Bilkent, Ankara 06800 (Turkey); Topalli, Kagan [National Nanotechnology Research Center (UNAM), Bilkent University, Bilkent, Ankara 06800, Turkey and Institute of Materials Science and Nanotechnology, Bilkent University, Ankara 06800 (Turkey); Okyay, Ali Kemal [National Nanotechnology Research Center (UNAM), Bilkent University, Bilkent, Ankara 06800 (Turkey); Institute of Materials Science and Nanotechnology, Bilkent University, Ankara 06800 (Turkey); Department of Electrical and Electronics Engineering, Bilkent University, Ankara 06800 (Turkey)

    2016-05-15

    This paper demonstrates the possible usage of TiO{sub x} thin films synthesized by atomic layer deposition as a microbolometer active material. Thin film electrical resistance is investigated as a function of thermal annealing. It is found that the temperature coefficient of resistance values can be controlled by coating/annealing processes, and the value as high as −9%/K near room temperature is obtained. The noise properties of TiO{sub x} films are characterized. It is shown that TiO{sub x} films grown by atomic layer deposition technique could have a significant potential to be used as a new active material for microbolometer-based applications.

  18. Polymerizable Ionic Liquid Crystals Comprising Polyoxometalate Clusters toward Inorganic-Organic Hybrid Solid Electrolytes

    Directory of Open Access Journals (Sweden)

    Takeru Ito

    2017-07-01

    Full Text Available Solid electrolytes are crucial materials for lithium-ion or fuel-cell battery technology due to their structural stability and easiness for handling. Emergence of high conductivity in solid electrolytes requires precise control of the composition and structure. A promising strategy toward highly-conductive solid electrolytes is employing a thermally-stable inorganic component and a structurally-flexible organic moiety to construct inorganic-organic hybrid materials. Ionic liquids as the organic component will be advantageous for the emergence of high conductivity, and polyoxometalate, such as heteropolyacids, are well-known as inorganic proton conductors. Here, newly-designed ionic liquid imidazolium cations, having a polymerizable methacryl group (denoted as MAImC1, were successfully hybridized with heteropolyanions of [PW12O40]3− (PW12 to form inorganic-organic hybrid monomers of MAImC1-PW12. The synthetic procedure of MAImC1-PW12 was a simple ion-exchange reaction, being generally applicable to several polyoxometalates, in principle. MAImC1-PW12 was obtained as single crystals, and its molecular and crystal structures were clearly revealed. Additionally, the hybrid monomer of MAImC1-PW12 was polymerized by a radical polymerization using AIBN as an initiator. Some of the resulting inorganic-organic hybrid polymers exhibited conductivity of 10−4 S·cm−1 order under humidified conditions at 313 K.

  19. Spinel versus layered structures for lithium cobalt oxide synthesized at 400-degrees-c

    CSIR Research Space (South Africa)

    Gummow, RJ

    1993-03-01

    Full Text Available Rietveld refinements of X-ray data of LiCoO2 prepared at 400-degrees-C and a chemically-delithiated product Li0.5CoO2 using space group symmetries R3mBAR and Fd3m are reported. Refinements in both R3mBAR (layered-type structure) and Fd3m (spinel...

  20. Investigation of Ni@CoO core-shell nanoparticle films synthesized by sequential layer deposition

    Energy Technology Data Exchange (ETDEWEB)

    Spadaro, M.C., E-mail: mariachiara.spadaro@unimore.it [CNR-NANO, via G. Campi 213/a, 41125 Modena (Italy); Dipartimento FIM, Università di Modena e Reggio Emilia, via G. Campi 213/a, 41125 Modena (Italy); Luches, P. [Dipartimento FIM, Università di Modena e Reggio Emilia, via G. Campi 213/a, 41125 Modena (Italy); Benedetti, F.; Valeri, S. [CNR-NANO, via G. Campi 213/a, 41125 Modena (Italy); Dipartimento FIM, Università di Modena e Reggio Emilia, via G. Campi 213/a, 41125 Modena (Italy); Turchini, S. [CNR-ISM, Via Fosso del Cavaliere 100, 00133 Roma (Italy); Bertoni, G. [CNR-IMEM, Parco Area delle Scienze 37/a, 43124 Parma (Italy); Ferretti, A.M.; Capetti, E.; Ponti, A. [Laboratorio di Nanotecnologie, Istituto di Scienze e Tecnologie Molecolari, Consiglio Nazionale delle Ricerche, via G. Fantoli 16/15, 20138 Milano (Italy); D’Addato, S. [CNR-NANO, via G. Campi 213/a, 41125 Modena (Italy); Dipartimento FIM, Università di Modena e Reggio Emilia, via G. Campi 213/a, 41125 Modena (Italy)

    2017-02-28

    Highlights: • We studied Ni/CoO core-shell nanoparticles (NP) obtained with a gas aggregation source. • The NP oxide shells were produced bye reactive deposition of Co in Oxygen atmosphere (p{sub O2} ≈ 10{sup −7} mbar). • XPS, SEM, STEM were used to obtain information on Ni chemical state and NP structure and morphology. • XMCD result showed evidence of remanent magnetization at room temperature. • We interpret XMCD results as due to stabilization induced by exchange bias due to AFM/FM coupling at the core/shell interface. - Abstract: Films of Ni@CoO core-shell nanoparticles (NP Ni core size d ≈ 11 nm) have been grown on Si/SiO{sub x} and lacey carbon supports, by a sequential layer deposition method: a first layer of CoO was evaporated on the substrate, followed by the deposition of a layer of pre-formed, mass-selected Ni NPs, and finally an overlayer of CoO was added. The Ni NPs were formed by a magnetron gas aggregation source, and mass selected with a quadrupole mass filter. The morphology of the films was investigated with Scanning Electron Microscopy and Scanning Transmission Electron Microscopy. The Ni NP cores have a shape compatible with McKay icosahedron, caused by multitwinning occurring during their growth in the source, and the Ni NP layer shows the typical random paving growth mode. After the deposition of the CoO overlayer, CoO islands are observed, gradually extending and tending to merge with each other, with the formation of shells that enclose the Ni NP cores. In situ X-ray Photoelectron Spectroscopy showed that a few Ni atomic layers localized at the core-shell interface are oxidized, hinting at the possibility of creating an intermediate NiO shell between Ni and CoO, depending on the deposition conditions. Finally, X-ray Magnetic Circular Dichroism at the Ni L{sub 2,3} absorption edge showed the presence of magnetization at room temperature even at remanence, revealing the possibility of magnetic stabilization of the NP film.

  1. Characterization and Electrochemical Performance at High Discharge Rates of Tin Dioxide Thin Films Synthesized by Atomic Layer Deposition

    Science.gov (United States)

    Maximov, M. Yu.; Novikov, P. A.; Nazarov, D. V.; Rymyantsev, A. M.; Silin, A. O.; Zhang, Y.; Popovich, A. A.

    2017-11-01

    In this study, thin films of tin dioxide have been synthesized on substrates of silicon and stainless steel by atomic layer deposition (ALD) with tetraethyl tin and by inductively coupled remote oxygen plasma as precursors. Studies of the surface morphology by scanning electron microscopy show a strong dependence on synthesis temperature. According to the x-ray photoelectron spectroscopy measurements, the samples contain tin in the oxidation state +4. The thickness of the thin films for electrochemical performance was approximately 80 nm. Electrochemical cycling in the voltage range of 0.01-0.8 V have shown that tin oxide has a stable discharge capacity of approximately 650 mAh/g during 400 charge/discharge cycles with an efficiency of approximately 99.5%. The decrease in capacity after 400 charge/discharge cycles was around 5-7%. Synthesized SnO2 thin films have fast kinetics of lithium ions intercalation and excellent discharge efficiency at high C-rates, up to 40C, with a small decrease in capacity of less than 20%. Specific capacity and cyclic stability of thin films of SnO2 synthesized by ALD exceed the values mentioned in the literature for pure tin dioxide thin films.

  2. Soft templating strategies for the synthesis of mesoporous materials: inorganic, organic-inorganic hybrid and purely organic solids.

    Science.gov (United States)

    Pal, Nabanita; Bhaumik, Asim

    2013-03-01

    With the discovery of MCM-41 by Mobil researchers in 1992 the journey of the research on mesoporous materials started and in the 21st century this area of scientific investigation have extended into numerous branches, many of which contribute significantly in emerging areas like catalysis, energy, environment and biomedical research. As a consequence thousands of publications came out in large varieties of national and international journals. In this review, we have tried to summarize the published works on various synthetic pathways and formation mechanisms of different mesoporous materials viz. inorganic, organic-inorganic hybrid and purely organic solids via soft templating pathways. Generation of nanoscale porosity in a solid material usually requires participation of organic template (more specifically surfactants and their supramolecular assemblies) called structure-directing agent (SDA) in the bottom-up chemical reaction process. Different techniques employed for the syntheses of inorganic mesoporous solids, like silicas, metal doped silicas, transition and non-transition metal oxides, mixed oxides, metallophosphates, organic-inorganic hybrids as well as purely organic mesoporous materials like carbons, polymers etc. using surfactants are depicted schematically and elaborately in this paper. Moreover, some of the frontline applications of these mesoporous solids, which are directly related to their functionality, composition and surface properties are discussed at the appropriate places. Copyright © 2012 Elsevier B.V. All rights reserved.

  3. TiO2/Sb2S3/P3HT Based Inorganic-Organic Hybrid Heterojunction Solar Cells with Enhanced Photoelectric Conversion Performance

    Science.gov (United States)

    Zhang, Hongchao; Song, Longfei; Luo, Linqu; Liu, Lei; Wang, Hongen; Wang, Fengyun

    2017-07-01

    Hybrid inorganic-organic heterojunction solar cells (HHSCs) are successfully fabricated using Sb2S3 as a light-absorbing semiconductor, TiO2 nanorods (NRs) as an electron-transport layer, and poly-3 (hexylthiophene) (P3HT) as both a hole conductor and light absorber. The enhanced photo-to-electric conversion performance is expected to (1) enhance optical absorption in the visible light region by Sb2S3 and (2) photo-generate highly efficient charge carrier separation at TiO2/Sb2S3 and Sb2S3/P3HT heterojunction interfaces. The power conversion efficiency (PCE) of HHSCs improves approximately fourfold by inserting the Sb2S3 layer, which can be further enhanced about four more times by optimizing the length of TiO2 nanorod arrays (NRAs). Finally, the mechanism to illustrate the effect of the length of TiO2 NRs on the PCE is discussed. This leads to a theory for achieving high-efficiency inorganic-organic solar cells.

  4. Synthesis of novel inorganic-organic hybrid materials for simultaneous adsorption of metal ions and organic molecules in aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Xinliang [State Key Laboratory of Applied Organic Chemistry, College of Chemistry and Chemical Engineering, Institute of Biochemical Engineering and Environmental Technology, Lanzhou University, Lanzhou 730000 (China); Li, Yanfeng, E-mail: liyf@lzu.edu.cn [State Key Laboratory of Applied Organic Chemistry, College of Chemistry and Chemical Engineering, Institute of Biochemical Engineering and Environmental Technology, Lanzhou University, Lanzhou 730000 (China); Yu, Cui; Ma, Yingxia; Yang, Liuqing; Hu, Huaiyuan [State Key Laboratory of Applied Organic Chemistry, College of Chemistry and Chemical Engineering, Institute of Biochemical Engineering and Environmental Technology, Lanzhou University, Lanzhou 730000 (China)

    2011-12-30

    Highlights: Black-Right-Pointing-Pointer Novel hybrid materials were synthesized and employed in the absorption of heavy metal and organic pollutants. Black-Right-Pointing-Pointer A novel method for amphiphilic adsorbent material synthesis was first reported in this paper. Black-Right-Pointing-Pointer The adsorbent material showed excellent adsorption capacity to Pb(II) and phenol. - Abstract: In this paper, atom transfer radical polymerization (ATRP) and radical grafting polymerization were combined to synthesize a novel amphiphilic hybrid material, meanwhile, the amphiphilic hybrid material was employed in the absorption of heavy metal and organic pollutants. After the formation of attapulgite (ATP) ATRP initiator, ATRP block copolymers of styrene (St) and divinylbenzene (DVB) were grafted from it as ATP-P(S-b-DVB). Then radical polymerization of acrylonitrile (AN) was carried out with pendent double bonds in the DVD units successfully, finally we got the inorganic-organic hybrid materials ATP-P(S-b-DVB-g-AN). A novel amphiphilic hybrid material ATP-P(S-b-DVB-g-AO) (ASDO) was obtained after transforming acrylonitrile (AN) units into acrylamide oxime (AO) as hydrophilic segment. The adsorption capacity of ASDO for Pb(II) could achieve 131.6 mg/g, and the maximum removal capacity of ASDO towards phenol was found to be 18.18 mg/g in the case of monolayer adsorption at 30 Degree-Sign C. The optimum pH was 5 for both lead and phenol adsorption. The adsorption kinetic suited pseudo-second-order equation and the equilibrium fitted the Freundlich model very well under optimal conditions. At the same time FT-IR, TEM and TGA were also used to study its structure and property.

  5. Syntheses, structures, photoluminescence and photocatalysis of 2D layered lanthanide-carboxylates with 2, 2′-dithiodibenzoic acid

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Ling; Zhong, Jie-Cen; Qiu, Xing-Tai; Sun, Yan-Qiong, E-mail: sunyq@fzu.edu.cn; Chen, Yi-Ping

    2017-02-15

    Two series of lanthanide-carboxylates, [Ln(2,2′-dtba)(2,2′-Hdtba)(EtOH)]{sub n} (I:Ln=Eu(1a), Dy(1b)) and [Ln(2,2′-dtba)(2,2′-Hdtba)(4,4′-bpy){sub 0.5}]{sub n} (II:Ln=Eu(2a), Dy(2b), Tb(2c) 2,2′-H{sub 2}dtba=2,2′-dithiodibenzoic acid, 4,4′-bpy=4,4′-bipyridine) have been synthesized under hydrothermal conditions. Interestingly, the H{sub 2}dtba organic ligand was generated by in situ S–S reaction of 2-mercaptobenzoic acid. Compounds I and II possess different 2D layered structures based on similar 1D [Ln(2,2′-dtba)]{sup +} chains. Photoluminescence studies reveal that compounds I and II exhibit strong lanthanide characteristic emission bands. Remarkably, Compounds 1b and 2a both exhibit good photocatalytic activity for degradation of Rhodamine-B (Rh-B) under the simulated sunlight irradiation. - Graphical abstract: Two series of lanthanide-carboxylates have been in situ synthesized under hydrothermal conditions. The lanthanide-carboxylates exhibit strong lanthanide characteristic emission bands and good photocatalytic activity for degradation of Rhodamine-B. - Highlights: • 2D layered lanthanide-carboxylates with 2,2′-dithiodibenzoic acid. • In situ S–S reaction of 2-mercaptobenzoic acid under hydrothermal condition. • The Emission spectra of I and II exhibit the characteristic transition of lanthanide ions. • Compounds 1b and 2a exhibit good photocatalytic activity for degradation of Rhodamine-B.

  6. Structural characterization and phase transformations in metal oxide fi lms synthesized by Successive Ionic Layer Deposition (SILD method

    Directory of Open Access Journals (Sweden)

    Ghenadii Korotcenkov

    2009-06-01

    Full Text Available In this paper the peculiarities of phase composition and morphology of metal oxides synthesized by successive ionic layer deposition (SILD method are discussed. The main attention is focused on SnO2–based metal oxides, which are promising materials for gas sensor applications. FTIR spectroscopy has shown that the precipitates of metal oxides, deposited by SILD method, are hydroxide, peroxide or hydrated metal oxide-based compounds. After annealing at relatively low temperatures (200–400°C these compounds release both water and peroxide oxygen and transform into corresponding oxides. According to XRD, SEM and AFM measurements it was confi rmed that deposited fi lms had fi ne-dispersed structures. Only after annealing at Tan>500°C, XRD diffraction peaks, typical for nanocrystalline material with grain size < 6–8 nm, were observed. High roughness and high degree of agglomeration are important peculiarities of metal oxides deposited by SILD. Metal oxide fi lms consist of spherical agglomerates. Degree of agglomeration of the fi lms and agglomerate size could be controlled. It was found that introduction of various additives in the solution for SILD could sufficiently change the microstructure of synthesized metal oxides.

  7. Coal liquefaction in an inorganic-organic medium. [DOE patent application

    Science.gov (United States)

    Vermeulen, T.; Grens, E.A. II; Holten, R.R.

    Improved process for liquefaction of coal by contacting pulverized coal in an inorganic-organic medium solvent system containing a ZnCl/sub 2/ catalyst, a polar solvent with the structure RX where X is one of the elements O, N, S, or P, and R is hydrogen or a lower hydrocarbon radical; the solvent system can contain a hydrogen donor solvent (and must when RX is water) which is immiscible in the ZnCl/sub 2/ and is a hydroaromatic hydrocarbon selected from tetralin, dihydrophenanthrene, dihydroanthracene or a hydrogenated coal derived hydroaromatic hydrocarbon distillate fraction.

  8. Keggin type inorganic-organic hybrid material containing Mn(II) monosubstituted phosphotungstate and S-(+)-sec-butyl amine: Synthesis and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Patel, Ketan [Chemistry Department, Faculty of Science, M.S. University of Baroda, Vadodara 390 002 (India); Patel, Anjali, E-mail: aupatel_chem@yahoo.com [Chemistry Department, Faculty of Science, M.S. University of Baroda, Vadodara 390 002 (India)

    2012-02-15

    Graphical abstract: A new organic-inorganic hybrid material containing Keggin type manganese substituted phosphotungstate and S-(+)-sec-butyl amine was synthesized and systematically characterized. Highlights: Black-Right-Pointing-Pointer New hybrid material comprising Mn substituted phosphotungstate (PW{sub 11}Mn) and S-(+)-sec-butyl amine (SBA) was synthesized. Black-Right-Pointing-Pointer The spectral studies reveal the attachment of SBA to the PW{sub 11}Mn without any distortion of structure. Black-Right-Pointing-Pointer The synthesized material comprises chirality. Black-Right-Pointing-Pointer The synthesized hybrid material can be used as a heterogeneous catalyst for carrying out asymmetric synthesis. -- Abstract: A new inorganic-organic POM-based hybrid material comprising Keggin type mono manganese substituted phosphotungstate and enantiopure S-(+)-sec-butyl amine was synthesized in an aqueous media by simple ligand substitution method. The synthesized hybrid material was systematically characterized in solid as well as solution by various physicochemical techniques such as elemental analysis, TGA, UV-vis, FT-IR, ESR and multinuclear solution NMR ({sup 31}P, {sup 1}H, {sup 13}C). The presence of chirality in the synthesized material was confirmed by CD spectroscopy and polarimeter. The above study reveals the attachment of S-(+)-sec-butyl amine to Keggin type mono manganese substituted phosphotungstate through N {yields} Mn bond. It also indicates the retainment of Keggin unit and presence of chirality in the synthesized material. An attempt was made to use the synthesized material as a heterogeneous catalyst for carrying out aerobic asymmetric oxidation of styrene using molecular oxygen. The catalyst shows the potential of being used as a stable recyclable catalytic material after simple regeneration without significant loss in conversion.

  9. Applications vs properties of Mg-Al Layered Double Hydroxides provided by their syntheses methods: alkoxide and alkoxide-free sol-gel syntheses and hydrothermal precipitation

    NARCIS (Netherlands)

    Chubar, N.; Gerda, V.; Megantari, O.; Mičušík, M.; Omastova, M.; Heister, K.; Man, P.; Fraissard, J.

    2013-01-01

    A tremendous number of studies have examined layered double hydroxides (LDH) for their technological applications in the ion exchange removal of toxic ions, recovery of valuable substances, catalysis, CO2 capture, as a layered host for storage/delivery of biologically active molecules, additives to

  10. AIEgens-Functionalized Inorganic-Organic Hybrid Materials: Fabrications and Applications.

    Science.gov (United States)

    Li, Dongdong; Yu, Jihong

    2016-12-01

    Inorganic materials functionalized with organic fluorescent molecules combine advantages of them both, showing potential applications in biomedicine, chemosensors, light-emitting, and so on. However, when more traditional organic dyes are doped into the inorganic materials, the emission of resulting hybrid materials may be quenched, which is not conducive to the efficiency and sensitivity of detection. In contrast to the aggregation-caused quenching (ACQ) system, the aggregation-induced emission luminogens (AIEgens) with high solid quantum efficiency, offer new potential for developing highly efficient inorganic-organic hybrid luminescent materials. So far, many AIEgens have been incorporated into inorganic materials through either physical doping caused by aggregation induced emission (AIE) or chemical bonding (e.g., covalent bonding, ionic bonding, and coordination bonding) caused by bonding induced emission (BIE) strategy. The hybrid materials exhibit excellent photoactive properties due to the intramolecular motion of AIEgens is restricted by inorganic matrix. Recent advances in the fabrication of AIEgens-functionalized inorganic-organic hybrid materials and their applications in biomedicine, chemical sensing, and solid-state light emitting are presented. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Adsorption of transition metal ions from aqueous solutions onto a novel silica gel matrix inorganic-organic composite material.

    Science.gov (United States)

    Yin, Ping; Xu, Qiang; Qu, Rongjun; Zhao, Guifang; Sun, Yanzhi

    2010-01-15

    A novel inorganic-organic composite material silica gel microspheres encapsulated by imidazole functionalized polystyrene (SG-PS-azo-IM) has been synthesized and characterized. This composite material was used to investigate the adsorption of Cr(III), Mn(II), Fe(III), Ni(II), Cu(II), Zn(II), Hg(II), Pb(II), Pd(II), Pt(II), Ag(I), and Au(III) from aqueous solutions, and the research results displayed that SG-PS-azo-IM has the highest adsorption capacity for Au(III). Langmuir and Freundlich isotherm models were applied to analyze the experimental data, the best interpretation for the experimental data was given by the Langmuir isotherm equation, and the maximum adsorption capacity for Au(III) is 1.700 mmol/g. The adsorption selectivity, the dynamic adsorption and desorption properties of SG-PS-azo-IM for Au(III) have also been studied. The results showed that SG-PS-azo-IM had excellent adsorption for Au(III) in four binary ions system, especially in the systems of Au(III)-Zn(II) and Au(III)-Cu(II), and almost Au(III) could be desorbed with the eluent solution of 0.5% thiourea in 1 mol/L HCl. Moreover, this novel composite material was used to preconcentrate Au(III) before its determination by flame atomic adsorption spectrometry. In the initial concentration range of 0.10-0.20 microg/mL, multiple of enrichment could reach 5.28. Thus, silica gel encapsulated by polystyrene coupling with imidazole (SG-PS-azo-IM) is favorable and useful for the removal of transition metal ions, and the high adsorption capacity makes it a good promising candidate material for Au(III) removal.

  12. Positional isomerism-driven two 3D pillar-layered metal-organic frameworks: Syntheses, topological structures and photoluminescence properties

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Yayong; Zhao, Siwei; Ma, Haoran; Han, Yi; Liu, Kang; Wang, Lei, E-mail: inorchemwl@126.com

    2016-06-15

    Two novel three-dimensional (3D) pillar-layered metal-organic frameworks (MOFs), namely [Zn{sub 2}(μ{sub 2}-OH)(boaba)(1,4-bmimb)]{sub n} (1) and {[Zn_5K_2(μ_2-H_2O)_2(boaba)_4(1,2-bmimb)_2(H_2O)_2]·H_2O}{sub n} (2), were prepared by hydrothermal reactions (H{sub 3}boaba=3,5-bis-oxyacetate-benzoic acid; 1,4-bmimb=1,4-bis((2-methyl-1H-imidazol-1-yl)methyl)benzene; 1,2-bmimb =1,2-bis((2-methyl-1H-imidazol-1-yl)methyl)benzene). Notably, 1 exhibits a (3,5)-connected binodal (6{sup 3})(6{sup 9}·8)-gra net with binuclear [Zn{sub 2}(μ{sub 2}-OH)(COO)]{sup 2+} clusters, while 2 shows a novel (4,4,5,9)-connected 4-nodal net constructed from the unique Zn(II)-K(I) heterometal rod-like substructures. The results indicate that the disposition of the 2-methylimidazolyl groups of bis(imidazole) ligands have a significant effect on structural diversity. Moreover, the photoluminescence properties of 1 and 2 have been investigated. - Graphical abstract: Two novel 3D pillar-layered metal-organic coordination networks with aromatic multicarboxylate anion and bis(imidazole) ligands have been synthesized and structurally characterized. Display Omitted - Highlights: • It is rarely reported that metal-organic frameworks prepared with 3,5-bis-oxyacetate-benzoic acid. • Two metal-organic frameworks based on positional isomeric ligands were synthesized and structurally characterized. • Compond 1 displays unique (3,5)-connected binodal gra topology. • Compound 2 exhibits (4,4,5,9)-connected 4-nodal topology based on the Zn(II)-K(I) heterometal rod-like substructures. • The photoluminescence properties of compound 1 and 2 have been investigated.

  13. A Novel and Facile Route to Synthesize Atomic-Layered MoS2 Film for Large-Area Electronics.

    Science.gov (United States)

    Boandoh, Stephen; Choi, Soo Ho; Park, Ji-Hoon; Park, So Young; Bang, Seungho; Jeong, Mun Seok; Lee, Joo Song; Kim, Hyeong Jin; Yang, Woochul; Choi, Jae-Young; Kim, Soo Min; Kim, Ki Kang

    2017-10-01

    High-quality and large-area molybdenum disulfide (MoS2 ) thin film is highly desirable for applications in large-area electronics. However, there remains a challenge in attaining MoS2 film of reasonable crystallinity due to the absence of appropriate choice and control of precursors, as well as choice of suitable growth substrates. Herein, a novel and facile route is reported for synthesizing few-layered MoS2 film with new precursors via chemical vapor deposition. Prior to growth, an aqueous solution of sodium molybdate as the molybdenum precursor is spun onto the growth substrate and dimethyl disulfide as the liquid sulfur precursor is supplied with a bubbling system during growth. To supplement the limiting effect of Mo (sodium molybdate), a supplementary Mo is supplied by dissolving molybdenum hexacarbonyl (Mo(CO)6 ) in the liquid sulfur precursor delivered by the bubbler. By precisely controlling the amounts of precursors and hydrogen flow, full coverage of MoS2 film is readily achievable in 20 min. Large-area MoS2 field effect transistors (FETs) fabricated with a conventional photolithography have a carrier mobility as high as 18.9 cm(2) V(-1) s(-1) , which is the highest reported for bottom-gated MoS2 -FETs fabricated via photolithography with an on/off ratio of ≈10(5) at room temperature. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Bimetallic Nickel/Ruthenium Catalysts Synthesized by Atomic Layer Deposition for Low-Temperature Direct Methanol Solid Oxide Fuel Cells.

    Science.gov (United States)

    Jeong, Heonjae; Kim, Jun Woo; Park, Joonsuk; An, Jihwan; Lee, Tonghun; Prinz, Fritz B; Shim, Joon Hyung

    2016-11-09

    Nickel and ruthenium bimetallic catalysts were heterogeneously synthesized via atomic layer deposition (ALD) for use as the anode of direct methanol solid oxide fuel cells (DMSOFCs) operating in a low-temperature range. The presence of highly dispersed ALD Ru islands over a porous Ni mesh was confirmed, and the Ni/ALD Ru anode microstructure was observed. Fuel cell tests were conducted using Ni-only and Ni/ALD Ru anodes with approximately 350 μm thick gadolinium-doped ceria electrolytes and platinum cathodes. The performance of fuel cells was assessed using pure methanol at operating temperatures of 300-400 °C. Micromorphological changes of the anode after cell operation were investigated, and the content of adsorbed carbon on the anode side of the operated samples was measured. The difference in the maximum power density between samples utilizing Ni/ALD Ru and Pt/ALD Ru, the latter being the best catalyst for direct methanol fuel cells, was observed to be less than 7% at 300 °C and 30% at 350 °C. The improved electrochemical activity of the Ni/ALD Ru anode compared to that of the Ni-only anode, along with the reduction of the number of catalytically active sites due to agglomeration of Ni and carbon formation on the Ni surface as compared to Pt, explains this decent performance.

  15. Surface-Enhanced Raman Scattering Based on Controllable-Layer Graphene Shells Directly Synthesized on Cu Nanoparticles for Molecular Detection.

    Science.gov (United States)

    Qiu, Hengwei; Huo, Yanyan; Li, Zhen; Zhang, Chao; Chen, Peixi; Jiang, Shouzhen; Xu, Shicai; Ma, Yong; Wang, Shuyun; Li, Hongsheng

    2015-10-05

    Graphene shells with a controllable number of layers were directly synthesized on Cu nanoparticles (CuNPs) by chemical vapor deposition (CVD) to fabricate a graphene-encapsulated CuNPs (G/CuNPs) hybrid system for surface-enhanced Raman scattering (SERS). The enhanced Raman spectra of adenosine and rhodamine 6G (R6G) showed that the G/CuNPs hybrid system can strongly suppress background fluorescence and increase signal-to-noise ratio. In four different types of SERS systems, the G/CuNPs hybrid system exhibits more efficient SERS than a transferred graphene/CuNPs hybrid system and pure CuNPs and graphene substrates. The minimum detectable concentrations of adenosine and R6G by the G/CuNPs hybrid system can be as low as 10(-8) and 10(-10)  M, respectively. The excellent linear relationship between Raman intensity and analyte concentration can be used for molecular detection. The graphene shell can also effectively prevent surface oxidation of Cu nanoparticles after exposure to ambient air and thus endow the hybrid system with a long lifetime. This work provides a basis for the fabrication of novel SERS substrates. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Iron oxide/aluminum/graphene energetic nanocomposites synthesized by atomic layer deposition: Enhanced energy release and reduced electrostatic ignition hazard

    Science.gov (United States)

    Yan, Ning; Qin, Lijun; Hao, Haixia; Hui, Longfei; Zhao, Fengqi; Feng, Hao

    2017-06-01

    Nanocomposites consisting of iron oxide (Fe2O3) and nano-sized aluminum (Al), possessing outstanding exothermic redox reaction characteristics, are highly promising nanothermite materials. However, the reactant diffusion inhibited in the solid state system makes the fast and complete energy release very challenging. In this work, Al nanoparticles anchored on graphene oxide (GO/Al) was initially prepared by a solution assembly approach. Fe2O3 was deposited on GO/Al substrates by atomic layer deposition (ALD). Simultaneously thermal reduction of GO occurs, resulting in rGO/Al@Fe2O3 energetic composites. Differential scanning calorimetry (DSC) analysis reveals that rGO/Al@Fe2O3 composite containing 4.8 wt% of rGO exhibits a 50% increase of the energy release compared to the Al@Fe2O3 nanothermite synthesized by ALD, and an increase of about 130% compared to a random mixture of rGO/Al/Fe2O3 nanoparticles. The enhanced energy release of rGO/Al@Fe2O3 is attributed to the improved spatial distribution as well as the increased interfacial intimacy between the oxidizer and the fuel. Moreover, the rGO/Al@Fe2O3 composite with an rGO content of 9.6 wt% exhibits significantly reduced electrostatic discharge sensitivity. These findings may inspire potential pathways for engineering energetic nanocomposites with enhanced energy release and improved safety characteristics.

  17. Structural Characterization and Infrared and Electrical Properties of the New Inorganic-Organic Hybrid Compound

    Directory of Open Access Journals (Sweden)

    A. Oueslati

    2013-01-01

    Full Text Available New inorganic-organic hybrid [(C3H74N]2Hg2Cl6 compound was obtained and characterised by single-crystal X-ray diffraction, infrared, and impedance spectroscopy. The latter crystallizes in the monoclinic system (space group C 2/c, with the following unit cell dimensions: (1 Å, (6 Å, (2 Å, and (2. Besides, its structure was solved using 84860 independent reflections leading to . Electrical properties of the material were studied using impedance spectroscopic technique at different temperatures in the frequency range of 209 Hz to 5 MHz. Detailed analysis of the impedance spectrum suggested that the electrical properties of the material are strongly temperature-dependent. The Nyquist plots clearly showed the presence of bulk and grain boundary effect in the compound.

  18. Inorganic-organic elastomer nanocomposites from integrated ellipsoidal silica-coated hematite nanoparticles as crosslinking agents

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez-Ferrer, A; Mezzenga, R [ETH Zurich, Institute of Food, Nutrition and Health, Food and Soft Materials Science Group, Schmelzbergstrasse 9, 8092 Zurich (Switzerland); Reufer, M; Schurtenberger, P; Dietsch, H, E-mail: herve.dietsch@unifr.ch [Adolphe Merkle Institute and Fribourg Center for Nanomaterials, University of Fribourg, Route de l' Ancienne Papeterie, PO Box 209, 1723 Marly 1 (Switzerland)

    2010-05-07

    We report on the synthesis of nanocomposites with integrated ellipsoidal silica-coated hematite (SCH) spindle type nanoparticles which can act as crosslinking agents within an elastomeric matrix. Influence of the surface chemistry of the hematite, leading either to dispersed particles or crosslinked particles to the elastomer matrix, was studied via swelling, scattering and microscopy experiments. It appeared that without surface modification the SCH particles aggregate and act as defects whereas the surface modified SCH particles increase the crosslinking density and thus reduce the swelling properties of the nanocomposite in good solvent conditions. For the first time, inorganic SCH particles can be easily dispersed into a polymer network avoiding aggregation and enhancing the properties of the resulting inorganic-organic elastomer nanocomposite (IOEN).

  19. Syntheses, structure and properties of three-dimensional pillared-layer Ag(I)-Ln(III) heterometallic coordination polymers based on mixed isonicotinate and hemimellitate ligands

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xinfa, E-mail: xflichem@163.com [Department of Chemistry, Zunyi Normal College, Zunyi 563002 (China); Cao, Rong, E-mail: rcao@fjirsm.ac.cn [State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou 350002 (China)

    2012-12-15

    Three pillared-layer 4d-4f Ag(I)-Ln(III) heterometallic coordination polymers (HCPs), formulated as [Ln{sub 2}Ag(hma){sub 2}(ina)(H{sub 2}O){sub 2}]{sub n} nH{sub 2}O [Ln=La(1), Pr(2), Nd(3); Hina=isonicotinic acid, H{sub 3}hma=hemimellitic acid], have been synthesized under hydrothermal conditions. Single-crystal and powder X-ray diffractions confirm that they are isostructural, which features a three-dimensional (3D) pillared-layer heterometallic structure built upon the strictly alternate arrangement of lanthanide-organic layers and [Ag(ina)] pillars. The layers and pillars are connected to each other by Ln-O and Ag-O coordination bonds. The photoluminescent property of the Nd derivative (3) has also been investigated. - Graphical abstract: Three pillared-layer 4d-4f Ag(I)-Ln(III) heterometallic coordination polymers have been synthesized and structurally characterized. Highlights: Black-Right-Pointing-Pointer Three 3D pillared-layer 4d-4f HCPs were synthesized by hydrothermal reactions. Black-Right-Pointing-Pointer The synergistic coordination strategy was employed. Black-Right-Pointing-Pointer It opens new perspective for the construction of structurally diversified 4d-4f HCPs.

  20. Enhancing Lifetime and Efficiency of Organic Solar Cell by Applying an In Situ Synthesized Low-Crystalline ZnO Layer.

    Science.gov (United States)

    Arabpour Roghabadi, Farzaneh; Ahmadi, Vahid; Abdollahi Nejand, Bahram; Oniy Aghmiuni, Karim

    2017-06-09

    By introducing an in situ synthesized low-crystalline ZnO (LC-ZnO) (amorphous) layer between the cathode and the active layer of PCPDTBT:CdSe solar cell {PCPDTBT: poly[2,6-(4,4-bis(2-ethylhexyl)-4H-cyclopenta [2,1-b:3,4-b']dithiophene)-alt-4,7(2,1,3-benzothiadiazole)]}, the device keeps more than 80 and 40 % of its initial lifetime after 180 and 360 days without any encapsulation, respectively. In this regard, 180 days is the highest lifetime achieved for polymer-based solar cells with direct configuration. In addition, the power conversion efficiency (PCE) is improved up to 70 % in the presence of the LC-ZnO interfacial layer. The LC-ZnO layer is synthesized during polymer annealing after solution-deposition of the precursor at a low temperature (140 °C) and a short time. Highly crystalline ZnO (HC-ZnO) nanoparticles are also synthesized and applied as an interfacial layer. The results show that the LC-ZnO is superior to the HC-ZnO in acting as cathode interfacial layer and moisture scavenger because of the high coverage and surface area provided by the in situ synthesis method. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Novel inorganic-organic hybrids constructed from multinuclear copper cluster and Keggin polyanions: from 1D wave-like chain to 2D network.

    Science.gov (United States)

    Wang, Xiuli; Wang, Yufei; Liu, Guocheng; Tian, Aixiang; Zhang, Juwen; Lin, Hongyan

    2011-09-28

    Two novel inorganic-organic hybrids constructed from Keggin-type polyanions and multinuclear copper clusters based on 1-H-1,2,3-benzotriazole (HBTA), [Cu(I)(8)(BTA)(4)(HBTA)(8)(SiMo(12)O(40))]·2H(2)O (1) and [Cu(II)(6)(OH)(4)(BTA)(4)(SiW(12)O(40))(H(2)O)(6)]·6H(2)O (2), have been hydrothermally synthesized and structurally characterized by single crystal X-ray diffraction, elemental analyses, IR spectra and thermogravimetric (TG) analyses. In compound 1, eight Cu(I) ions were linked by twelve HBTA/BTA ligands to form an octanuclear Cu(I) cluster, which is connected by SiMo(12)O(40)(4-) anion with two bridging O atoms and two terminal O atoms to construct a one-dimensional (1D) wave-like chain. The octanuclear copper unit represents the maximum subunit linked just by amine ligands in the POMs system. In 2, four BTA ligands linked five Cu(II) ions constructing a pentanuclear "porphyrin-like" subunit, which is connected by another Cu(II) ion to form a 1D metal-organic band. The SiW(12)O(40)(4-) polyanions as tetradentate inorganic linkages extend the 1D band into a two-dimensional (2D) network with (8(3))(2)(8(5)·10) topology. To the best of our knowledge, compounds 1 and 2 represent the first examples of inorganic-organic hybrids based on metal-HBTA multinuclear subunits and polyoxometalates. The photocatalysis and electrochemical properties have been investigated in this paper. This journal is © The Royal Society of Chemistry 2011

  2. Iron oxide/aluminum/graphene energetic nanocomposites synthesized by atomic layer deposition: Enhanced energy release and reduced electrostatic ignition hazard

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Ning; Qin, Lijun [Laboratory of Material Surface Engineering and Nanofabrication, Xi’an Modern Chemistry Research Institute, Shaanxi (China); Science and Technology on Combustion and Explosion Laboratory, Xi’an Modern Chemistry Research Institute, Shaanxi (China); Hao, Haixia [Science and Technology on Combustion and Explosion Laboratory, Xi’an Modern Chemistry Research Institute, Shaanxi (China); Hui, Longfei [Laboratory of Material Surface Engineering and Nanofabrication, Xi’an Modern Chemistry Research Institute, Shaanxi (China); Science and Technology on Combustion and Explosion Laboratory, Xi’an Modern Chemistry Research Institute, Shaanxi (China); Zhao, Fengqi [Science and Technology on Combustion and Explosion Laboratory, Xi’an Modern Chemistry Research Institute, Shaanxi (China); Feng, Hao, E-mail: fenghao98@hotmail.com [Laboratory of Material Surface Engineering and Nanofabrication, Xi’an Modern Chemistry Research Institute, Shaanxi (China); State Key Laboratory of Fluorine and Nitrogen Chemicals, Xi’an Modern Chemistry Research Institute, Shaanxi (China)

    2017-06-30

    Highlights: • Energetic rGO/Al@Fe{sub 2}O{sub 3}nanocompositeswerefabricatedbyatomiclayerdepositionapproach. • A novel Al@Fe{sub 2}O{sub 3} unit featuring core-shell structure was decorated on the graphene nanosheet. • RGO/Al@Fe{sub 2}O{sub 3} nanocomposite exhibits superior energy release and reduced electrostatic ignition hazard. - Abstract: Nanocomposites consisting of iron oxide (Fe{sub 2}O{sub 3}) and nano-sized aluminum (Al), possessing outstanding exothermic redox reaction characteristics, are highly promising nanothermite materials. However, the reactant diffusion inhibited in the solid state system makes the fast and complete energy release very challenging. In this work, Al nanoparticles anchored on graphene oxide (GO/Al) was initially prepared by a solution assembly approach. Fe{sub 2}O{sub 3} was deposited on GO/Al substrates by atomic layer deposition (ALD). Simultaneously thermal reduction of GO occurs, resulting in rGO/Al@Fe{sub 2}O{sub 3} energetic composites. Differential scanning calorimetry (DSC) analysis reveals that rGO/Al@Fe{sub 2}O{sub 3} composite containing 4.8 wt% of rGO exhibits a 50% increase of the energy release compared to the Al@Fe{sub 2}O{sub 3} nanothermite synthesized by ALD, and an increase of about 130% compared to a random mixture of rGO/Al/Fe{sub 2}O{sub 3} nanoparticles. The enhanced energy release of rGO/Al@Fe{sub 2}O{sub 3} is attributed to the improved spatial distribution as well as the increased interfacial intimacy between the oxidizer and the fuel. Moreover, the rGO/Al@Fe{sub 2}O{sub 3} composite with an rGO content of 9.6 wt% exhibits significantly reduced electrostatic discharge sensitivity. These findings may inspire potential pathways for engineering energetic nanocomposites with enhanced energy release and improved safety characteristics.

  3. Well-defined inorganic/organic nanocomposite by nano silica core-poly(methyl methacrylate/butylacrylate/trifluoroethyl methacrylate) shell.

    Science.gov (United States)

    Chang, Gang; He, Ling; Zheng, Wei; Pan, Aizhao; Liu, Jing; Li, Yingjun; Cao, Ruijun

    2013-04-15

    The novel inorganic/organic core-shell SiO2/P(MMA/BA/3FMA) nanocomposite for coating application is synthesized in this paper by seed emulsion polymerization, in which the inorganic phase is composed of nano-SiO2 modified by vinyl-trimethoxysilane (VMS) or γ-methacryloxy propyl trimethoxylsilane (MPMS), and the organic phase is made of terpolymer by 2,2,2-trifluoroethyl methacrylate (3FMA), methyl methacrylate (MMA), and n-butyl acrylate (BA). The chemical structure of SiO2/P(MMA/BA/3FMA) is characterized by FTIR. The effect of surfactant polyvinylpyrrolidone (PVP), sodium dodecyl sulfate (SDS)/octyl phenyl polyoxyethylene ether (TX-10), sodium dodecyl benzene sulfonate (SDBS)/TX-10 and sodium hexametaphosphate (SHMP) on the grafting ratio (GR) of VMS and MPMS, the dispersion of nano-SiO2 particles and the film properties of SiO2/P(MMA/BA/3FMA) are investigated by TGA, DLS, TEM, SEM, and XPS. The morphology variation and the particle size distributions of SiO2/P(MMA/BA/3FMA) with the content of surfactant and P(MMA/BA/3FMA) are characterized. It is found that MPMS is more effective than VMS in improving GR and the dispersion of nano-SiO2 particles. The surfactants are favor of gaining the higher GR in the multilayer grafted nano-SiO2, especially SDS/TX-10 for 17.6% GR. The morphology of SiO2/P(MMA/BA/3FMA) is controlled by the amount of SDS/TX-10 and P(MMA/BA/3FMA) as the core-shell particles, the stacked pomegranate seed with multicore and the multicore-single shell structure when w(MMA)/w(BA)/w(3FMA)=1.3/1/1. Among the different surfactants, SDBS/TX-10 and PVP could give the monodispersing nano-SiO2 in the terpolymer matrix of the films, but SDS/TX-10 and SDBS/TX-10 could perform the fluorine-rich surface. Crown Copyright © 2013. Published by Elsevier Inc. All rights reserved.

  4. ZnO/anthracene based inorganic/organic nanowire heterostructure: Photoresponse and photoluminescence studies

    Energy Technology Data Exchange (ETDEWEB)

    Dhara, Soumen [Department of Physics, Indian Institute of Technology Guwahati, Guwahati 781039 (India); Giri, P. K. [Department of Physics, Indian Institute of Technology Guwahati, Guwahati 781039 (India); Centre for Nanotechnology, Indian Institute of Technology Guwahati, Guwahati 781039 (India)

    2012-02-15

    The effects of surface modification of vertically aligned ZnO nanowires (NWs) with anthracene for the improved photocurrent, photoresponse, and UV photoluminescence have been investigated in this work. The formation of ZnO/anthracene based inorganic/organic NWs heterostructure by surface capping with anthracene solution was confirmed from the high resolution transmission electron microscopy and Fourier transport infrared spectroscopy analyses. After the anthracene capping of ZnO NWs, despite an increase in dark current, we obtained a significant improvement in the photocurrent and photoresponsivity. A sixfold improvement in the UV photocurrent-to-dark current ratio is obtained with capping. Compared to the uncapped NWs, the photoresponse is significantly faster for the ZnO/anthracene system with response and reset times of 1.5 and 1.6 s, respectively. The room temperature photoluminescence spectra show threefold enhanced UV emission with large enhancement in the ratio of UV to green emission intensities. The faster photoresponse and enhanced photocurrent from the ZnO/anthracene heterostructure are explained on the basis of modification of surface defects and interfacial charge transfer process.

  5. Colour tuning in white hybrid inorganic/organic light-emitting diodes

    Science.gov (United States)

    Bruckbauer, Jochen; Brasser, Catherine; Findlay, Neil J.; Edwards, Paul R.; Wallis, David J.; Skabara, Peter J.; Martin, Robert W.

    2016-10-01

    White hybrid inorganic/organic light-emitting diodes (LEDs) were fabricated by combining a novel organic colour converter with a blue inorganic LED. An organic small molecule was specifically synthesised to act as down-converter. The characteristics of the white colour were controlled by changing the concentration of the organic molecule based on the BODIPY unit, which was embedded in a transparent matrix, and volume of the molecule and encapsulant mixture. The concentration has a critical effect on the conversion efficiency, i.e. how much of the absorbed blue light is converted into yellow light. With increasing concentration the conversion efficiency decreases. This quenching effect is due to aggregation of the organic molecule at higher concentrations. Increasing the deposited amount of the converter does not increase the yellow emission despite more blue light being absorbed. Degradation of the organic converter was also observed during a period of 15 months from LED fabrication. Angular-dependent measurements revealed slight deviation from a Lambertian profile for the blue and yellow emission peaks leading to a small change in ‘whiteness’ with emission angle. Warm white and cool white light with correlated colour temperatures of 2770 K and 7680 K, respectively, were achieved using different concentrations of the converter molecule. Although further work is needed to improve the lifetime and poor colour rendering, these hybrid LEDs show promising results as an alternative approach for generating white LEDs compared with phosphor-based white LEDs.

  6. Environmental applications of inorganic-organic clays for recalcitrant organic pollutants removal: Bisphenol A.

    Science.gov (United States)

    Rathnayake, Suramya I; Xi, Yunfei; Frost, Ray L; Ayoko, Godwin A

    2016-05-15

    Bisphenol-A (BPA) adsorption onto inorganic-organic clays (IOCs) was investigated. For this purpose, IOCs synthesised using octadecyltrimethylammonium bromide (ODTMA, organic modifier) and hydroxy aluminium (Al13, inorganic modifier) were used. Three intercalation methods were employed with varying ODTMA concentration in the synthesis of IOCs. Molecular interactions of clay surfaces with ODTMA and Al13 and their arrangements within the interlayers were determined using Fourier transform infrared spectroscopy (FTIR). Surface area and porous structure of IOCs were determined by applying Brunauer, Emmett, and Teller (BET) method to N2 adsorption-desorption isotherms. Surface area decreased upon ODTMA intercalation while it increased with Al13 pillaring. As a result, BET specific surface area of IOCs was considerably higher than those of organoclays. Initial concentration of BPA, contact time and adsorbent dose significantly affected BPA adsorption into IOCs. Pseudo-second order kinetics model is the best fit for BPA adsorption into IOCs. Both Langmuir and Freundlich adsorption isotherms were applicable for BPA adsorption (R(2)>0.91) for IOCs. Langmuir maximum adsorption capacity for IOCs was as high as 109.89mgg(-1) and it was closely related to the loaded ODTMA amount into the clay. Hydrophobic interactions between long alkyl chains of ODTMA and BPA are responsible for BPA adsorption into IOCs. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Metal-inorganic-organic matrices as efficient sorbents for hydrogen storage.

    Science.gov (United States)

    Azzouz, Abdelkrim; Nousir, Saadia; Bouazizi, Nabil; Roy, René

    2015-03-01

    Stabilization of metal nanoparticles (MNPs) without re-aggregation is a major challenge. An unprecedented strategy is developed for achieving high dispersion of copper(0) or palladium(0) on montmorillonite-supported diethanolamine or thioglycerol. This results in novel metal-inorganic-organic matrices (MIOM) that readily capture hydrogen at ambient conditions, with easy release under air stream. Hydrogen retention appears to involve mainly physical interactions, slightly stronger on thioglycerol-based MIOM (S-MIOM). Thermal enhancement of desorption suggests also a contribution of chemical interactions. The increase of hydrogen uptake with prolonged contact times arises from diffusion hindrance, which appears to be beneficial by favoring hydrogen entrapment. Even with compact structures, MIOMs act as efficient sorbents with much higher efficiency factor (1.14-1.17 mmol H 2 m(-2)) than many other sophisticated adsorbents reported in the literature. This opens new prospects for hydrogen storage and potential applications in microfluidic hydrogenation reactions. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Syntheses, structure and properties of three-dimensional pillared-layer Ag(I)-Ln(III) heterometallic coordination polymers based on mixed isonicotinate and hemimellitate ligands

    Science.gov (United States)

    Li, Xinfa; Cao, Rong

    2012-12-01

    Three pillared-layer 4d-4f Ag(I)-Ln(III) heterometallic coordination polymers (HCPs), formulated as [Ln2Ag(hma)2(ina)(H2O)2]n nH2O [Ln=La(1), Pr(2), Nd(3); Hina=isonicotinic acid, H3hma=hemimellitic acid], have been synthesized under hydrothermal conditions. Single-crystal and powder X-ray diffractions confirm that they are isostructural, which features a three-dimensional (3D) pillared-layer heterometallic structure built upon the strictly alternate arrangement of lanthanide-organic layers and [Ag(ina)] pillars. The layers and pillars are connected to each other by Ln-O and Ag-O coordination bonds. The photoluminescent property of the Nd derivative (3) has also been investigated.

  9. Inorganic, organic, and encapsulated minerals in vegetable meal based diets for Sparus aurata (Linnaeus, 1758

    Directory of Open Access Journals (Sweden)

    David Domínguez

    2017-10-01

    Full Text Available Substituting fishmeal (FM with vegetable meal (VM can markedly affect the mineral composition of feeds, and may require additional mineral supplementation. Their bioavailability and optimal supplementation levels depend also on the form of delivery of minerals. The aim of the study was to determine the effect of different delivery forms of three major trace elements (Zn, Mn and Se in a marine teleost. Gilthead sea bream juveniles of 22.5 g were fed a VM-based diet for 12 weeks that was either not supplemented with these minerals or supplemented with inorganic, organic, or encapsulated inorganic forms of minerals in triplicate and compared to a FM-based diet. Our results showed that mineral delivery form significantly affected the biochemical composition and morphology of posterior vertebrae. Supplementation of VM-based diets with inorganic forms of the target minerals significantly promoted growth, increased the vertebral weight and content of ash and Zn, enhanced bone mineralization and affected the vertebral shape. Conversely, encapsulation of inorganic minerals reduced fish growth and vertebral mineral content, whereas supplementation of organic minerals, enhanced bone osteogenesis by upregulating bone morphogenetic protein 2 (bmp2 gene and produced vertebrae with a larger length in relation to height. Furthermore, organic mineral forms of delivery downregulated the expression of oxidative stress related genes, such as Cu/Zn superoxide dismutase (Cu/Zn sod and glutathione peroxidase 1 (gpx-1, suggesting thus that dietary minerals supplemented in the organic form could be reasonably considered more effective than the inorganic and encapsulated forms of supply.

  10. Core-shell nanophosphor architecture: toward efficient energy transport in inorganic/organic hybrid solar cells.

    Science.gov (United States)

    Li, Qinghua; Yuan, Yongbiao; Chen, Zihan; Jin, Xiao; Wei, Tai-huei; Li, Yue; Qin, Yuancheng; Sun, Weifu

    2014-08-13

    In this work, a core-shell nanostructure of samarium phosphates encapsulated into a Eu(3+)-doped silica shell has been successfully fabricated, which has been confirmed by X-ray diffraction, transmission electron microscopy (TEM), and high-resolution TEM. Moreover, we report the energy transfer process from the Sm(3+) to emitters Eu(3+) that widens the light absorption range of the hybrid solar cells (HSCs) and the strong enhancement of the electron-transport of TiO2/poly(3-hexylthiophene) (P3HT) bulk heterojunction (BHJ) HSCs by introducing the unique core-shell nanoarchitecture. Furthermore, by applying femtosecond transient absorption spectroscopy, we successfully obtain the electron transport lifetimes of BHJ systems with or without incorporating the core-shell nanophosphors (NPs). Concrete evidence has been provided that the doping of core-shell NPs improves the efficiency of electron transfers from donor to acceptor, but the hole transport almost remains unchanged. In particular, the hot electron transfer lifetime was shortened from 30.2 to 16.7 ps, i.e., more than 44% faster than pure TiO2 acceptor. Consequently, a notable power conversion efficiency of 3.30% for SmPO4@Eu(3+):SiO2 blended TiO2/P3HT HSCs is achieved at 5 wt % as compared to 1.98% of pure TiO2/P3HT HSCs. This work indicates that the core-shell NPs can efficiently broaden the absorption region, facilitate electron-transport of BHJ, and enhance photovoltaic performance of inorganic/organic HSCs.

  11. Inorganic, organic, and encapsulated minerals in vegetable meal based diets for Sparus aurata (Linnaeus, 1758).

    Science.gov (United States)

    Domínguez, David; Rimoldi, Simona; Robaina, Lidia E; Torrecillas, Silvia; Terova, Genciana; Zamorano, María J; Karalazos, Vasileios; Hamre, Kristin; Izquierdo, Marisol

    2017-01-01

    Substituting fishmeal (FM) with vegetable meal (VM) can markedly affect the mineral composition of feeds, and may require additional mineral supplementation. Their bioavailability and optimal supplementation levels depend also on the form of delivery of minerals. The aim of the study was to determine the effect of different delivery forms of three major trace elements (Zn, Mn and Se) in a marine teleost. Gilthead sea bream juveniles of 22.5 g were fed a VM-based diet for 12 weeks that was either not supplemented with these minerals or supplemented with inorganic, organic, or encapsulated inorganic forms of minerals in triplicate and compared to a FM-based diet. Our results showed that mineral delivery form significantly affected the biochemical composition and morphology of posterior vertebrae. Supplementation of VM-based diets with inorganic forms of the target minerals significantly promoted growth, increased the vertebral weight and content of ash and Zn, enhanced bone mineralization and affected the vertebral shape. Conversely, encapsulation of inorganic minerals reduced fish growth and vertebral mineral content, whereas supplementation of organic minerals, enhanced bone osteogenesis by upregulating bone morphogenetic protein 2 (bmp2) gene and produced vertebrae with a larger length in relation to height. Furthermore, organic mineral forms of delivery downregulated the expression of oxidative stress related genes, such as Cu/Zn superoxide dismutase (Cu/Zn sod) and glutathione peroxidase 1 (gpx-1), suggesting thus that dietary minerals supplemented in the organic form could be reasonably considered more effective than the inorganic and encapsulated forms of supply.

  12. An inorganic/organic hybrid magnetic network as a colorimetric fluorescent nanosensor and its recognizing behavior toward Hg2+

    Science.gov (United States)

    Zeng, Xianfei; Xu, Yaohui; Chen, Xiumin; Ma, Wenhui; Zhou, Yang

    2017-11-01

    An inorganic/organic hybrid magnetic Fe3O4@SiO2 network functionalized with rhodamine derivatives was devised as a nanosensor for selective detection and removal of Hg2+ in this work. The inorganic/organic hybrid composites showed naked-eye color change in water/methanol media. The distinct color change on the surface of functionalized composite network was observed by separating and drying from aqueous solution after adsorbing Hg2+. The fluorescence spectra indicated that the functionalized nanosensor was highly sensitive and selective to Hg2+ in aqueous solution. Density functional theory (DFT) calculation was performed, which revealed a mechanism of fluorescence generated from Hg2+ induced desulfurization of rhodamine derivatives via forming new five-membered ring structure. The as-obtained composites not only had an excellent adsorption capability for Hg2+, but also showed a strong magnetic sensitivity, which allowed one to separate the functionalized magnetic nanocomposites from the solution.

  13. In situ growth of CuInS2 nanocrystals on nanoporous TiO2 film for constructing inorganic/organic heterojunction solar cells.

    Science.gov (United States)

    Chen, Zhigang; Tang, Minghua; Song, Linlin; Tang, Guoqiang; Zhang, Bingjie; Zhang, Lisha; Yang, Jianmao; Hu, Junqing

    2013-08-16

    Inorganic/organic heterojunction solar cells (HSCs) have attracted increasing attention as a cost-effective alternative to conventional solar cells. This work presents an HSC by in situ growth of CuInS2(CIS) layer as the photoabsorption material on nanoporous TiO2 film with the use of poly(3-hexylthiophene) (P3HT) as hole-transport material. The in situ growth of CIS nanocrystals has been realized by solvothermally treating nanoporous TiO2 film in ethanol solution containing InCl3 · 4H2O, CuSO4 · 5H2O, and thioacetamide with a constant concentration ratio of 1:1:2. InCl3 concentration plays a significant role in controlling the surface morphology of CIS layer. When InCl3 concentration is 0.1 M, there is a layer of CIS flower-shaped superstructures on TiO2 film, and CIS superstructures are in fact composed of ultrathin nanoplates as 'petals' with plenty of nanopores. In addition, the nanopores of TiO2 film are filled by CIS nanocrystals, as confirmed using scanning electron microscopy image and by energy dispersive spectroscopy line scan analysis. Subsequently, HSC with a structure of FTO/TiO2/CIS/P3HT/PEDOT:PSS/Au has been fabricated, and it yields a power conversion efficiency of 1.4%. Further improvement of the efficiency can be expected by the optimization of the morphology and thickness of CIS layer and the device structure.

  14. Protein-enabled layer-by-layer syntheses of aligned, porous-wall, high-aspect-ratio TiO{sub 2} nanotube arrays

    Energy Technology Data Exchange (ETDEWEB)

    Berrigan, John D.; Cai, Ye; Sandhage, Kenneth H. [School of Materials Science and Engineering, Air Force Center of Excellence on Bio-Nano-Enabled Inorganic/Organic Nanocomposites and Improved Cognition (BIONIC), Georgia Institute of Technology, 771 Ferst Drive, Atlanta, Georgia 30332-0400 (United States); Kang, Tae-Sik; Deneault, James R.; Durstock, Michael F. [Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson Air Force Base, Ohio, 45433-7702 (United States)

    2011-05-10

    An aqueous, protein-enabled (biomimetic), layer-by-layer titania deposition process is developed, for the first time, to convert aligned-nanochannel templates into high-aspect-ratio, aligned nanotube arrays with thin (34 nm) walls composed of co-continuous networks of pores and titania nanocrystals (15 nm ave. size). Alumina templates with aligned open nanochannels are exposed in an alternating fashion to aqueous protamine-bearing and titania precursor-bearing (Ti(IV) bis-ammonium-lactato-dihydroxide, TiBALDH) solutions. The ability of protamine to bind to alumina and titania, and to induce the formation of a Ti-O-bearing coating upon exposure to the TiBALDH precursor, enables the layer-by-layer deposition of a conformal protamine/Ti-O-bearing coating on the nanochannel surfaces within the porous alumina template. Subsequent protamine pyrolysis yields coatings composed of co-continuous networks of pores and titania nanoparticles. Selective dissolution of the underlying alumina template through the porous coating then yields freestanding, aligned, porous-wall titania nanotube arrays. The interconnected pores within the nanotube walls allow enhanced loading of functional molecules (such as a Ru-based N719 dye), whereas the interconnected titania nanoparticles enable the high-aspect-ratio, aligned nanotube arrays to be used as electrodes (as demonstrated for dye-sensitized solar cells with power conversion efficiencies of 5.2 {+-} 0.4%). (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  15. Possibility of Superconductivity in a Layered Perovskite Niobate, KCa_2Nb_3O_<10>, Synthesized by an Ion Exchange Reaction

    OpenAIRE

    竹澤, 幸; 寺西, 喬; 石川, 宏典; 徳光, 俊章; 戸田, 健司; 上松, 和義; 佐藤, 峰夫; Takezawa, Sachi; Teranishi, Takashi; Ishikawa, Hironori; Tokumitsu, Toshiaki; Toda, Kenji; Uematsu, Kazuyoshi; Sato, Mineo

    2006-01-01

    We prepared low temperature phase of triple layered perovksite KCa_2Nb_3O_ by an ion-exchange reaction. Li-intercalated low temperature phase, Li_KCa_2Nb_3O_, shows strong diamagnetic signal around at 7.8 K. The magnetic phase transition temperature of Li-intercalated low temperature phase is higher than that of Li-intercalated high temperature phase.

  16. Smart Magnetic Nanosensors Synthesized through Layer-by-Layer Deposition of Molecular Beacons for Noninvasive and Longitudinal Monitoring of Cellular mRNA.

    Science.gov (United States)

    Wang, Min; Hou, Xiaochun; Wiraja, Christian; Sun, Libo; Xu, Zhichuan J; Xu, Chenjie

    2016-03-09

    Noninvasive and longitudinal monitoring of gene expression in living cells is essential for understanding and monitoring cellular activities. Herein, a smart magnetic nanosensor is constructed for the real-time, noninvasive, and longitudinal monitoring of cellular mRNA expression through the layer-by-layer deposition of molecular beacons (MBs) and polyethylenimine on the iron oxide nanoparticles. The loading of MBs, responsible for the signal intensity and the tracking time, was easily tuned with the number of layers incorporated. The idea was first demonstrated with the magnetic nanosensors for glyceraldehyde-3-phosphate dehydrogenase (GAPDH) mRNA, which was efficiently internalized into the cells under the influence of magnetic field. This nanosensor allowed the continuous monitoring of the cellular GAPDH mRNA expression for 1 month. Then this platform was further utilized to incorporate two kinds of MBs for alkaline phosphatase (ALP) and GAPDH mRNAs, respectively. The multifunctional nanosensors permitted the simultaneous monitoring of the reference gene (GAPDH mRNA) and the early osteogenic differentiation marker (ALP mRNA) expression. When the fluorescence signal ratio between ALP mRNA MBs and GAPDH mRNA MBs was taken, the dynamic osteogenic differentiation process of MSCs was accurately monitored.

  17. Influence of Organically-Modified Montmorillonite and Synthesized Layered Silica Nanoparticles on the Properties of Polypropylene and Polyamide-6 Nanocomposites

    Directory of Open Access Journals (Sweden)

    Moisés Gómez

    2016-10-01

    Full Text Available Nanocomposites of layered silica nanoparticles (LSN obtained by the sol–gel method, and commercial montmorillonite clay Cloisite®20A with polypropylene (PP and Cloisite®30B with polyamide-6 (PA6 were prepared by melt blending in order to study their effects on barrier, mechanical properties, and thermal stability. Transmission electron microscopy (TEM showed that all of the nanocomposites present agglomerated nanoparticles with some degree of individual particles. In barrier properties, LSN dramatically increased the oxygen and water vapor permeability of PP at low loadings (<5 wt % due to the percolation effect. However, in PP and PA6 nanocomposites with clays, the permeability showed increases and decreases depending on the solubility of the permeating gases with the clays and the polymers. Tensile stress-strain tests otherwise showed that the nanocomposites with clays present an enhancement in the elastic modulus. Meanwhile, with the LSN, a decrease was found due to the formation of agglomerations and voids. Finally, thermogravimetric analysis under inert conditions showed the nanoparticles do not have a significant effect on the thermal stability of the nanocomposites. These results expose the relevance of the type of layered nanoparticle and polymer matrix on the barrier, mechanical, and thermal behaviors of the resulting nanocomposites.

  18. Quantifying potential reduction in contrast dose with monoenergetic images synthesized from dual-layer detector spectral CT.

    Science.gov (United States)

    Tsang, Derek S; Merchant, Thomas E; Merchant, Sophie E; Smith, Hanna; Yagil, Yoad; Hua, Chia-Ho

    2017-10-01

    To estimate the potential dose reduction in iodinated contrast when interpreting monoenergetic images from spectral CT. 51 paediatric patients received contrast-enhanced CT simulation for radiation therapy using a single-source, dual-layer detector spectral CT. The contrast-to-noise ratios (CNRs) of blood vessels were measured relative to surrounding soft tissue. CNRs on monoenergetic 40-70 keV images were compared with polychromatic 120 kVp images. To compare with in vivo results, a phantom with iodine inserts (2-20 mg ml -1 concentration) was scanned and CNRs were calculated relative to water background. Monoenergetic keV and body site had significant effects on CNR ratio (p images, respectively. Image noise was highest at 40 keV and lowest at 70 keV. Phantom measurements indicated that the same CNR as 120 kVp images can be achieved with a 4.0-fold lower iodine concentration on 40 keV images and 2.5-fold lower on 50 keV images. 50 keV monoenergetic images provided the best balance of improved CNR on all studies (mean 2.4-fold increase in vivo) for enhancing vessels vs image noise. A 50% reduction in contrast dose on a 50 keV image should maintain comparable or better CNR as compared with polychromatic CT in over 80% of CT studies. Advances in knowledge: Use of a novel, single-source, dual-layer detector spectral CT scanner to improve visualization of contrast-enhanced blood vessels will reduce the amount of iodinated contrast required for radiation oncology treatment planning.

  19. The Enhanced Catalytic Performance and Stability of Rh/γ-Al₂O₃ Catalyst Synthesized by Atomic Layer Deposition (ALD) for Methane Dry Reforming.

    Science.gov (United States)

    Li, Yunlin; Jiang, Jing; Zhu, Chaosheng; Li, Lili; Li, Quanliang; Ding, Yongjie; Yang, Weijie

    2018-01-22

    Rh/γ-Al₂O₃ catalysts were synthesized by both incipient wetness impregnation (IWI) and atomic layer deposition (ALD). The TEM images of the two catalysts showed that the catalyst from ALD had smaller particle size, and narrower size distribution. The surface chemical states of both catalysts were investigated by both XPS and X-ray Absorption Near Edge Structure (XANES), and the catalyst from IWI had higher concentration of Rh 3+ than that from ALD. The catalytic performance of both catalysts was tested in the dry reforming of methane reaction. The catalyst from ALD showed a higher conversion and selectivity than that from IWI. The stability testing results indicated that the catalyst from ALD showed similar stability to that from IWI at 500 °C, but higher stability at 800 °C.

  20. Enhanced visible-light photocatalytic activity of ZnS/g-C3N4 type-II heterojunction nanocomposites synthesized with atomic layer deposition

    Science.gov (United States)

    Kim, Won Jun; Jang, Eunyong; Park, Tae Joo

    2017-10-01

    Atomic layer deposition (ALD) is proposed to synthesize ZnS-coated g-C3N4 photocatalysts which form an effective heterojunction for charge separation by reducing carrier recombination. It also, enables decrease in processing time from few days to several hours and circumvents collection process of synthesized powder which leads improvement in the productivity. In ZnS/g-C3N4 heterojunction composite, ZnS quantum-dots are uniformly distributed on g-C3N4 rather than conformal ZnS film due to hydrophobic nature of g-C3N4 surface. Photocatalytic activity of the ZnS/g-C3N4 heterojunction composites is enhanced up to 2.6 times compared to pristine g-C3N4 by tailoring ZnS ALD cycles. A range of ALD cycles from 2 to 50 have applied, out of which 5 cycles are found optimum for best efficiency, above and below 5 cycles it becomes either saturated or less potent, respectively.

  1. Inorganic-organic hybrid polyoxometalate containing supramolecular helical chains: Preparation, characterization and application in chemically bulk-modified electrode

    Energy Technology Data Exchange (ETDEWEB)

    Han Zhangang [Faculty of Chemistry, Northeast Normal University, Changchun, Jilin, 130024 (China); Zhao Yulong [Faculty of Chemistry, Northeast Normal University, Changchun, Jilin, 130024 (China); Peng Jun [Faculty of Chemistry, Northeast Normal University, Changchun, Jilin, 130024 (China)]. E-mail: jpeng@nenu.edu.cn; Liu Qun [Faculty of Chemistry, Northeast Normal University, Changchun, Jilin, 130024 (China); Wang Enbo [Faculty of Chemistry, Northeast Normal University, Changchun, Jilin, 130024 (China)

    2005-10-10

    An inorganic-organic hybrid polyoxometalate (POM) (Hbpy){sub 4}[SiMo{sub 12}O{sub 40}] (1) (bpy = 2,4-bipyridine), has been prepared and characterized. X-ray diffraction study reveals that compound 1 contains interesting organic double helical chains. The hybrid nanoparticles was used as a solid bulkmodifier to fabricate a three-dimensional chemically modified carbon paste electrode (1-CPE) by direct mixing. The electrochemical behavior and electrocatalysis of 1-CPE has been studied in detail. The results indicate that 1-CPE has a good electrocatalytic activity toward the reduction of nitrite in 1 M H{sub 2}SO{sub 4} aqueous solution. 1-CPE shows remarkable stability that can be ascribed to the interactions existed between POM anions and organic double helical bpy chains, which are very important for practical applications in electrode modification.

  2. Tunable and white light emitting AlPO4 mesoporous glass by design of inorganic/organic luminescent species

    Directory of Open Access Journals (Sweden)

    Jin He

    2015-04-01

    Full Text Available The realization of tunable and white light emitting sources employed by UV-LED with single-host phosphors has been an exciting development in the search for high luminous efficiency and excellent color rendering index white-light source. A tunable and white light emitting mesoporous glass was prepared by utilizing both inorganic/organic (Europium/coumarin luminescent species in the meso-structure. The tunable and white light emission was deliberately designed by CIE calculation based on the individual emission spectra, which was realized by tailoring the emission of Eu2+/Eu3+ ions and coumarin 535 in sol-gel AlPO4 mesoporous glass. This simple and versatile procedure is not limited in the combination of rare earth and organic dye and is therefore extendable to other luminescent species in meso-structure for color-tunable efficient solid-state lighting sources.

  3. Inorganic-organic composite nanoengineered films using self-assembled monolayers for directed zeolite film growth

    Energy Technology Data Exchange (ETDEWEB)

    Dye, R.C.; Hermes, R.E.; Martinez, M.G.; Peachey, N.M.

    1997-10-01

    This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Zeolites, or molecular sieves, are aluminosilicate cage structures that are typically grown from a heterogeneous mixture of organic template molecules, inorganic salts of alumina and silica, and water. These zeolites are used in industry for catalytic cracking of hydrocarbons (gasoline manufacture from oil), and contaminant removal from chemical production processes. Within one year, we developed a viable method for the deposition of a quaternary ammonium salt amphiphile onto silicon wafer substrates. Using a biomimetic growth process, we were also able to demonstrate the first thin-film formation of a zeolite structure from such an organic template. Additionally, we synthesized the precursor to another amphiphile which was to be for further studies.

  4. Synthesis of Inorganic-Organic Hybrid Materials Designed for Radiation Detection, Luminescence, and Gas Storage

    Science.gov (United States)

    Vaughn, Shae Anne

    Materials discovery is the driving force behind the research presented herein. Basic research has been conducted in order to obtain a better understanding of coordination chemistry and structural outcomes, particularly within the area of trivalent lanthanides. Discovering new materials is one route to further advancement of technology; another one is the focus on incremental changes to already existing materials. Often the building blocks of a compound are chosen in an effort to synthesize a material that makes use of the properties of each individual component and may result in a better, more robust, applicable material. The combination of organic and inorganic components for the synthesis of novel materials with potential applications such as scintillation photoluminescence, catalysis, and gas storage are the focus of the research presented herein. The first part focuses on lanthanide organic hybrid materials, where the synthesis of a new family of potential scintillating materials was undertaken and yielded improved understanding of the control that can be achieved over the topological structure of these materials by controlling the coordinating crystallization solvents. This research has led to the synthesis of an array of unique motifs, ranging from dimeric complexes, tetrameric complexes, to 1-D chains, and most intriguing of all, catenated tetradecanuclear rings. These rings represent the largest lanthanide rings synthesized to date, the next largest multinuclear rings, until now, were dodecanuclear complexes of alkoxides. From a basic research standpoint this is an exciting new development in lanthanide coordination chemistry and illustrates the importance of steric effects upon a system. These complexes are potential scintillators, supported by their luminescence and measurements of similar compounds that demonstrate surprising scintillation efficiencies. In the second part, other hybrid materials that have also been prepared are discussed, including the

  5. Magnetic behavior of inorganic-organic hybrid phosphite compounds with 3-d transition metals

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, Sergio; Mesa, J.L. E-mail: qipmeruj@lg.ehu.es; Pizarro, Jose L.; Pena, Alazne; Gutierrez, Jon; Arriortua, Maria I.; Rojo, Teofilo

    2004-05-01

    The (C{sub 2}H{sub 10}N{sub 2})[M(HPO{sub 3})F{sub 3}](M{sup III}=V, Cr, Fe) [I], (C{sub 2}H{sub 10}N{sub 2})[M{sub 3}(HPO{sub 3}){sub 4}] (M{sup II}=Mn, Co) [II] and (C{sub 2}H{sub 10}N{sub 2}){sub 0.5}[Fe(HPO{sub 3}){sub 2}](M{sup III}=V, Fe) [III] compounds have been synthesized by using mild hydrothermal conditions. The crystal structure of the compounds shows different dimensionality. The compounds exhibit antiferromagnetic behavior, with hysteresis loops for the bimetallic (C{sub 2}H{sub 10}N{sub 2})[Mn{sub 2.09}Co{sub 0.91}(HPO{sub 3}){sub 4}] and (C{sub 2}H{sub 10}N{sub 2}){sub 0.5}[V{sub 0.48}Fe{sub 0.52}(HPO{sub 3}){sub 2}] phases, indicating the existence of a ferrimagnetic behavior probably due to a spin descompensation.

  6. Biocompatible electrically conductive nanofibers from inorganic-organic shape memory polymers.

    Science.gov (United States)

    Kai, Dan; Tan, Mein Jin; Prabhakaran, Molamma P; Chan, Benjamin Qi Yu; Liow, Sing Shy; Ramakrishna, Seeram; Loh, Xian Jun

    2016-12-01

    A porous shape memory scaffold with both biomimetic structures and electrical conductivity properties is highly promising for nerve tissue engineering applications. In this study, a new shape memory polyurethane polymer which consists of inorganic polydimethylsiloxane (PDMS) segments with organic poly(ε-caprolactone) (PCL) segments was synthesized. Based on this poly(PCL/PDMS urethane), a series of electrically conductive nanofibers were electrospun by incorporating different amounts of carbon-black. Our results showed that after adding carbon black into nanofibers, the fiber diameters increased from 399±76 to 619±138nm, the crystallinity decreased from 33 to 25% and the resistivity reduced from 3.6 GΩ/mm to 1.8 kΩ/mm. Carbon black did not significantly influence the shape memory properties of the resulting nanofibers, and all the composite nanofibers exhibited decent shape recovery ratios of >90% and shape fixity ratios of >82% even after 5 thermo-mechanical cycles. PC12 cells were cultured on the shape memory nanofibers and the composite scaffolds showed good biocompatibility by promoting cell-cell interactions. Our study demonstrated that the poly(PCL/PDMS urethane)/carbon-black nanofibers with shape memory properties could be potentially used as smart 4-dimensional (4D) scaffolds for nerve tissue regeneration. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. One-step synthesis of layered yttrium hydroxides in immiscible liquid-liquid systems: Intercalation of sterically-bulky hydrophobic organic anions and doping of europium ions

    Science.gov (United States)

    Watanabe, Mebae; Fujihara, Shinobu

    2014-02-01

    Inorganic-organic layered rare-earth compounds were synthesized on the basis of a biphasic liquid-liquid system in one pot. Layered yttrium hydroxides (LYHs) were chosen as a host material for the intercalation of hydrophobic organic guest anions such as benzoate, sebacate, or laurate. In a typical synthesis, an organic phase dissolving carboxylic acid was placed in contact with an equal amount of an aqueous phase dissolving yttrium nitrate n-hydrate and urea. At elevated temperatures up to 80 °C, urea was hydrolyzed to release hydroxyl anions which were used to form yttrium hydroxide layers. LYHs were then precipitated with the intercalation of carboxylate anions delivered from the organic phase under the distribution law. The structure and the morphology of the LYHs could be modulated by the intercalated anions. Doped with Eu3+ ions, the LYHs exhibited red photoluminescence which was enhanced by the intercalated anions due to the antenna effect.

  8. Formation and investigation of ultrathin layers of Co{sub 2}FeSi ferromagnetic alloy synthesized on silicon covered with a CaF{sub 2} barrier layer

    Energy Technology Data Exchange (ETDEWEB)

    Grebenyuk, G.S.; Gomoyunova, M.V. [Ioffe Physical Technical Institute, Russian Academy of Sciences, St. Petersburg 194021 (Russian Federation); Pronin, I.I., E-mail: Igor.Pronin@mail.ioffe.ru [Ioffe Physical Technical Institute, Russian Academy of Sciences, St. Petersburg 194021 (Russian Federation); ITMO University, 197101 St. Petersburg (Russian Federation); Vyalikh, D.V. [Institute of Solid State Physics, Dresden University of Technology, 01062 Dresden (Germany); Saint Petersburg State University, 198504 St. Petersburg (Russian Federation); Molodtsov, S.L. [ITMO University, 197101 St. Petersburg (Russian Federation); European XFEL GmbH, Albert-Einstein-Ring 19, 22761 Hamburg (Germany); Institute of Experimental Physics, Technische Universitat Bergakademie Freiberg, 09599 Freiberg (Germany)

    2016-03-01

    Highlights: • Formation of Co{sub 2}FeSi alloy films on the CaF{sub 2}/Si(111) substrate is studied in situ. • 5 nm CaF{sub 2} layer inhibits the diffusion of the alloy components into a substrate. • Annealing of deposited Co/Fe/Si layers at 200 °C leads to formation of the alloy. • The alloy is characterized by the mode with energy of 99.01 eV in Si 2p spectra. • 2 nm Co{sub 2}FeSi film is ferromagnetic and stable at temperatures below 450 °C. - Graphical abstract: - Abstract: Ultrathin (∼2 nm) films of Co{sub 2}FeSi ferromagnetic alloy were formed on silicon by solid-phase epitaxy and studied in situ. Experiments were carried out in an ultrahigh vacuum (UHV) using substrates of Si(1 1 1) single crystals covered with a 5 nm thick CaF{sub 2} barrier layer. The elemental and phase composition as well as the magnetic properties of the synthesized films were analyzed by photoelectron spectroscopy using synchrotron radiation and by magnetic linear dichroism in photoemission of Fe 3p and Co 3p electrons. The study shows that the synthesis of the Co{sub 2}FeSi ferromagnetic alloy occurs in the temperature range of 200–400 °C. At higher temperatures, the films become island-like and lose their ferromagnetic properties, as the CaF{sub 2} barrier layer is unable to prevent a mass transfer between the film and the Si substrate, which violates the stoichiometry of the alloy.

  9. Controllable Syntheses of MOF-Derived Materials.

    Science.gov (United States)

    Zou, Kang-Yu; Li, Zuo-Xi

    2017-12-12

    Metal-organic frameworks (MOFs), as an important kind of porous inorganic-organic hybrid materials with inherent outstanding physicochemistry characteristics, can be widely applied as versatile precursors for the facile preparation of functional MOF-derived materials. However, there are plenty of sophisticated factors during the synthetic process, which is far from reaching the goal of effectively controlling the nature of MOF-derived materials (such as the composition, morphology and surface area). Therefore, it is urgently necessary to develop regular protocols and concepts for controllable syntheses of MOF-derived materials. In this minireview, we mainly summarize and analyze complicated factors in the fabrication of MOF-derived materials according to recently reported literatures, and this provides a new insight into the rational design and syntheses of MOF-derived materials. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Prediction of the lipophilicity of nine new synthesized selenazoly and three aroyl-hydrazinoselenazoles derivatives by reversed-phase high performance thin-layer chromatography.

    Science.gov (United States)

    Cozma, A; Zaharia, V; Ignat, A; Gocan, S; Grinberg, N

    2012-03-01

    Using reversed-phase high-performance thin-layer chromatography and a methanol-water mixture as the mobile phase, the lipophilicity of 12 new synthesized derivatives is studied. The first eight compounds have as a basic chemical structure aryliden-hydrazino-selenazoles, and the second group of the three compounds belongs to aroyl-hydrazinoselenazoles. The linear correlation between R(Mw) and the methanol-water ratios showed high values for the correlation coefficient. The chromatographic hydrophobic index is determined by using the ratio -R(Mw)/S, and the obtained values ranged between 99 and 73. A good linear correlation is obtained between R(Mw) and the slope. The log P values are calculated using ACD/Labs Software. The matrices are formed with R(Mw) and log P and are subjected to a principal component analysis (PCA). The best way to extract information from PCA is graphically, by plotting the obtained matrices. By analyzing the scores, the compounds can be grouped as follows: a group containing nine compounds, and a second one containing three compounds. Each group of compounds has the same basic chemical structure.

  11. Flood hazard energy in urban areas: a new integrated method for flood risk analysis in synthesizing interactions with urban boundary layer

    Science.gov (United States)

    Park, S. Y.; Schmidt, A.

    2015-12-01

    Since urban physical characteristics (such as morphology and land-use/land-cover) are different from those of nature, altered interactions between the surface and atmosphere (especially urban boundary layer, UBL) or surface and subsurface can affect the hydrologic behavior and hence the flood hazards. In this research we focus on three main aspects of the urban surface/atmosphere interactions that affect flood hazard: urban heat island (UHI) effect, increased surface roughness, and accumulated aerosols. These factors, along with the uncertainties in quantifying these components make risk analysis intractable. In order to perform a risk analysis, the impact of these components needs to be mapped to a variable that can be mathematically described in a risk-analysis framework. We propose defining hazard energy as a surrogate for the combined effect of these three components. Perturbations that can change the hazard energy come from diverse sources in the urban areas and these somewhat disconnected things can be combined by the energy concept to characterize the impacts of urban areas in risk assessment. This approach synthesizes across hydrological and hydraulic processes in UBL, land surface, subsurface, and sewer network with scrutinizing energy exchange across places. We can extend our understanding about not only the influence of cities on local climate in rural areas or larger scales but also the interaction of cities and nature affecting each other.

  12. Inorganic-organic shape memory polymers and foams for bone defect repairs

    Science.gov (United States)

    Zhang, Dawei

    The ultimate goal of this research was to develop a "self-fitting" shape memory polymer (SMP) scaffold for the repair of craniomaxillofacial (CMF) bone defects. CMF defects may be caused by trauma, tumor removal or congenital abnormalities and represent a major class of bone defects. Their repair with autografts is limited by availability, donor site morbidity and complex surgical procedures. In addition, shaping and positioning of these rigid grafts into irregular defects is difficult. Herein, we have developed SMP scaffolds which soften at T > ˜56 °C, allowing them to conformally fit into a bone defect. Upon cooling to body temperature, the scaffold becomes rigid and mechanically locks in place. This research was comprised of four major studies. In the first study, photocrosslinkable acrylated (AcO) SMP macromers containing a poly(epsilon-caprolactone) (PCL) segment and polydimethylsiloxane (PDMS) segments were synthesized with the general formula: AcO-PCL40-block-PDMS m-block-PCL40-OAc. By varying the PDMS segment length (m), solid SMPs with highly tunable mechanical properties and excellent shape memory abilities were prepared. In the second study, porous SMP scaffolds were fabricated based on AcO-PCL 40-block-PDMS37-block-PCL 40-OAc via a revised solvent casting particulate leaching (SCPL) method. By tailoring scaffold parameters including salt fusion, macromer concentration and salt size, scaffold properties (e.g. pore features, compressive modulus and shape memory behavior) were tuned. In the third study, porous SMP scaffolds were produced from macromers with variable PDMS segment lengths (m = 0 -- 130) via an optimized SCPL method. The impact on pore features, thermal, mechanical, and shape memory properties as well as degradation rates were investigated. In the final study, a bioactive polydopamine coating was applied onto pore surfaces of the SMP scaffold prepared from PCL diacrylate. The thin coating did not affect intrinsic bulk properties of the

  13. Larger spontaneous polarization ferroelectric inorganic-organic hybrids: [PbI3](infinity) chains directed organic cations aggregation to Kagomé-shaped tubular architecture.

    Science.gov (United States)

    Zhao, Hai-Rong; Li, Dong-Ping; Ren, Xiao-Ming; Song, You; Jin, Wan-Qin

    2010-01-13

    Four isostructural inorganic-organic hybrid ferroelectric compounds, assembled from achiral 3-R-benzylidene-1-aminopyridiniums (R = NO(2), Br, Cl, or F for 1-4, respectively) and [PbI(3)](-) anions with the chiral Kagomé-shaped tubular aggregating architecture, show larger spontaneous polarizations.

  14. Hybrid inorganic-organic nano- and microcomposites based on silica sols and synthetic polyelectrolytes

    Directory of Open Access Journals (Sweden)

    2008-02-01

    Full Text Available Interaction between anionic (and cationic colloidal particles of silica having the particles diameters 12 and 22 nm with synthetic cationic (and anionic polyelectrolytes of various nature and structure was studied by potentiometric, conductimetric spectroturbidimetric and viscometric methods in aqueous solution. It was shown that the complexation of silica nanoparticles with linear polyelectrolytes leads to formation of mostly stoichiometric interpolyelectrolyte complexes (IPEC which precipitate from aqueous solution. Casting of water-soluble IPEC followed by thermal treatment gives thin composite films insoluble in water while ‘layer by layer’ (LbL deposition of polyelectrolyte components onto silica sols leads to formation of multilayered nano- and microcomposites. The possible mechanism of formation of LbL multilayers consisting of silica sol (SiO2 ‘cores’ and polyethyeleneimine-polyacrylic acid (PEI-PAA ‘shells’ was suggested. It was found that in diluted aqueous solution the radius of gyration, Rg and hydrodynamic radius, Rhmean of LbL particles are independent on LbL concentration and smaller than 100 nm. The zeta potential values of LbL particles are arranged between –10 and –30 mV. The average size of LbL particles estimated by scanning electron microscopy (SEM is in the range of 200–500 nm. Thermal treatment of LbL multilayers followed by etching of (SiO2 ‘core’ by HF leads to formation of a series of spherical nanocavities and blob-like microcavities.

  15. STM studies of hybrid inorganic-organic molecular magnets on an ultrathin insulating film.

    Science.gov (United States)

    Choi, Taeyoung; Gupta, Jay

    2010-03-01

    The interplay of electronic structure and magnetic properties is of interest in various organic materials. For example, transition metal -- tetracyanoethylene (TCNE) complexes form a family of organic magnets with Curie temperatures exceeding room temperature. TCNE has a strong electron affinity that facilitates chemical bond formation and charge transfer with metals. However, the chemical bonding and its influence on electronic and magnetic properties is not well understood at the atomic scale. We use scanning tunneling microscopy to build Co-TCNE and Fe-TCNE complexes with atomic manipulation on an ultrathin insulating layer (Cu2N on Cu(100)). Cu2N decouples the complexes from the conducting substrate, which impacts their electronic and magnetic properties. Tunneling spectroscopy shows molecular orbitals and inelastic steps due to various vibrational modes and spin excitations. The ability to connect such complexes with additional metal atom chains provides an opportunity to study spin and charge transport through single molecules with atomically precise contacts. http://www.physics.ohio-state.edu/˜jgupta

  16. Sponge spicules as blueprints for the biofabrication of inorganic-organic composites and biomaterials.

    Science.gov (United States)

    Müller, Werner E G; Wang, Xiaohong; Cui, Fu-Zhai; Jochum, Klaus Peter; Tremel, Wolfgang; Bill, Joachim; Schröder, Heinz C; Natalio, Filipe; Schlossmacher, Ute; Wiens, Matthias

    2009-06-01

    While most forms of multicellular life have developed a calcium-based skeleton, a few specialized organisms complement their body plan with silica. However, of all recent animals, only sponges (phylum Porifera) are able to polymerize silica enzymatically mediated in order to generate massive siliceous skeletal elements (spicules) during a unique reaction, at ambient temperature and pressure. During this biomineralization process (i.e., biosilicification) hydrated, amorphous silica is deposited within highly specialized sponge cells, ultimately resulting in structures that range in size from micrometers to meters. Spicules lend structural stability to the sponge body, deter predators, and transmit light similar to optic fibers. This peculiar phenomenon has been comprehensively studied in recent years and in several approaches, the molecular background was explored to create tools that might be employed for novel bioinspired biotechnological and biomedical applications. Thus, it was discovered that spiculogenesis is mediated by the enzyme silicatein and starts intracellularly. The resulting silica nanoparticles fuse and subsequently form concentric lamellar layers around a central protein filament, consisting of silicatein and the scaffold protein silintaphin-1. Once the growing spicule is extruded into the extracellular space, it obtains final size and shape. Again, this process is mediated by silicatein and silintaphin-1, in combination with other molecules such as galectin and collagen. The molecular toolbox generated so far allows the fabrication of novel micro- and nanostructured composites, contributing to the economical and sustainable synthesis of biomaterials with unique characteristics. In this context, first bioinspired approaches implement recombinant silicatein and silintaphin-1 for applications in the field of biomedicine (biosilica-mediated regeneration of tooth and bone defects) or micro-optics (in vitro synthesis of light waveguides) with promising

  17. Advanced Magnetic Resonance Techniques for the Structural Characterization of Aminoxyl Radicals and Their Inorganic-Organic Nanocomposite Systems.

    Science.gov (United States)

    Eckert, Hellmut

    2017-05-02

    Electron and nuclear spins are extremely sensitive probes of their local structural and dynamic surroundings. Their Zeeman energy levels are modified by different types of local magnetic and electric fields created by their structural environment, which influence their magnetic resonance condition. For this reason, electron spin resonance (ESR) and nuclear magnetic resonance (NMR) spectroscopies have become extremely powerful tools of structural analysis, which are being widely used for the structural characterization of complex solids. Following a brief introduction into the basic theoretical foundations the most commonly used techniques and their application towards the structural characterization of paramagnetic solids based on aminoxyl radicals and their inorganic-organic nanocomposites will be described. Both ESR and NMR observables are useful for monitoring intermolecular interactions between unpaired electron spins, which are particularly important for the design of organically based ferromagnetic systems. ESR and NMR methods based on this effect can be used for monitoring the synthesis of polynitroxides and for evaluating the catalytic function of aminoxyl intercalation compounds. Finally, the sensitivity of ESR signals to motional dynamics can be exploited for characterizing molecule-surface interactions in nanocomposite systems. In the context of the latter work recently developed signal enhancement strategies are described, using polarization transfer from electron spins to nuclear spins for NMR spectroscopic detection. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Evaluation of a novel hybrid inorganic/organic polymer type material in the arsenic removal process from drinking water.

    Science.gov (United States)

    Iesan, Carmen M; Capat, Constantin; Ruta, Florin; Udrea, Ion

    2008-10-01

    The objective of this paper is the evaluation of a hybrid inorganic/organic polymer type material based on hydrated ferric oxide (HFO), in the adsorption process of arsenic oxyanions from contaminated waters used as drinking water. The study includes rapid small-scale column tests conducted in continuous flow operation in order to assess the arsenic removal capacity in various conditions. Thus it was evaluated the influence of some competing ions like silicate and phosphate on As(V) adsorption and the influence of feed water pH in the removal process of As(V) and As(III) species. Based on the As/pH variation in time at different feed water pH (5, 7 and 9), a possible sorption mechanism that fits the experimental data was suggested. The regeneration and re-use of the hybrid adsorbent was studied in the presence and in the absence of the contaminant ions. The novel hybrid material is very selective towards arsenic oxyanions even though the presence of silica and phosphate reduces the adsorption capacity.

  19. Light Wave Coupled Flat Panel Displays and Solid-State Lighting Using Hybrid Inorganic/Organic Materials

    Science.gov (United States)

    Steckl, Andrew J.; Heikenfeld, Jason; Allen, Steven C.

    2005-09-01

    We present a review of light-emitting materials and devices that combine inorganic and organic lumophores and hosts. The essence of this hybrid inorganic/organic (I/O) approach is to combine materials, structures and devices from each category in such a way as to obtain best-of-both-worlds performance. The combination of high power/high efficiency inorganic light pump sources with high conversion efficiency organic lumophores is discussed in detail. In this type of Hybrid I/O device, near-ultraviolet (UV) or blue pump light is selectively converted to various visible colors based on the molecular structure of each lumophore. Since the lumophores are optically pumped their reliability is greatly increased compared to electrically pumped organic emitters. Methods for coupling the light from pumps to lumophores include direct path excitation (DPE) and light wave coupling (LWC). DPE uses one pump per lumophore pixel, which allows for active matrix style addressing, but requires large arrays of pumps. LWC uses either a single source or a small number of pump sources. To obtain pixelation for Hybrid I/O LWC devices we have developed a novel electrowetting switching method. Examples of Hybrid I/O displays and solid-state lighting are discussed.

  20. Effects of Inorganic-organic Incorporation on Productivity and Soil Fertility of Rice Cropping System in Red Soil Area of China

    Institute of Scientific and Technical Information of China (English)

    ZHOU Wei-jun; WANG Kai-rong; ZHANG Guan-yuan; XIE Xiao-li

    2002-01-01

    Results from ten-year (1990- 1999) field experiments indicated that the productivity and the soil fertility of rice cropping system were significantly influenced by the fertilization system adopted in red soil area of China. Contrasting with no-fertilizer treatment (CK), yield-increase rate of organic matter cycling,chemical NPK and inorganic-organic fertilizer incorporation treatments were 56.5%, 62.5% and 80.7%, respectively. In the case of optimum fertilization system, the largest contribution of inorganic fertilizer to the yield was 38.5% while that of inorganic-organic fertilizer incorporation was 44.7 %. The content of soil organic matter changed in tendency from decrease to equilibrium with heightened the extent of N, P and K incorporation while that of inorganic-organic fertilizer incorporation could be enhanced further. After N, P and K entered into the rice cropping system and maintained organic matter cycling in the system, the pools of total N, P and K could be strengthened.

  1. A novel method of synthesizing p-CuInSe{sub 2} thin films from the stacked elemental layers using a closed graphite box

    Energy Technology Data Exchange (ETDEWEB)

    Adurodija, F.O.; Carter, M.J.; Hill, R. [Univ. of Northumbria, Newcastle upon Tyne (United Kingdom). Newcastle Photovoltaics Applications Centre

    1994-12-31

    The Stacked Elemental Layer (SEL) technique has been demonstrated as a method for producing films over a large area, but the films normally annealed in vacuum, mostly exhibited poor morphology with small grain sizes < 1 {micro}m which result in poor devices. A novel method of fabricating CuInSe{sub 2} films by annealing or selenization of the Cu, In and Se layers deposited onto Mo coated glass substrates in a closed graphite box was developed. SEM, EDX and XRD were used to characterize all films. Dense films with crystal sizes of about 4 {micro}m were obtained over an area of 15 cm{sup 2}. The mechanical properties of CuInSe{sub 2} formed from various SEL sequences of In, Cu and Se layers on different substrates was also investigated. A sequence starting with an In layer (In/Cu/In/Se) was found to produce the best adhesion on Mo coated glass, however, the adhesion was found to depend on the thickness of the first In layer. A thin In layer produced the best adhesion, increasing the thickness of the In layer resulted in poor adhesion. Devices with efficiency of 6.5% have been achieved using the absorbers processed in the graphite box. The low efficiency was due to a high series resistance in the cells.

  2. A useful organofunctionalized layered silicate for textile dye removal.

    Science.gov (United States)

    Royer, Betina; Cardoso, Natali F; Lima, Eder C; Macedo, Thaís R; Airoldi, Claudio

    2010-09-15

    The octosilicate Na-RUB-18 has the ability to exchange its original sodium with cetyltrimethylammonium cations. This procedure leads to interlayer space expansion, with the aim of obtaining inorganic-organic nanostructured hybrids by chemical modification reactions. The silylating agent 3-trimethoxysilylpropylurea was attached to the inorganic layer using heterogeneous methodology. The new organofunctionalized material was characterized by elemental analysis, X-ray diffraction, (13)C and (29)Si nuclear magnetic resonances in the solid state, infrared spectroscopy, thermogravimetry and scanning electron microscopy. The amount of silylating agent immobilized on surface was 2.03 mmol g(-1), with a basal distance of 2.43 nm. Nuclear magnetic resonance of (13)C and (29)Si nuclei evidenced covalent bond formation between organosilyl and silanol groups at the surface. The new synthesized nanostructured layered material was able to remove the textile dye Reactive Black 5 from aqueous solution, followed through a batchwise process. The effects of stirring time, adsorbent dosage and pH on the adsorption capacity demonstrated that 150 min is enough to reach equilibrium at 298+/-1 K at pH 3.0. Based on error function values the data were best fitted to fractional-order kinetic models and compared to pseudo-first-order, pseudo-second-order and chemisorption kinetic models. The equilibrium data were better fitted to the Sips isotherm models. Copyright 2010 Elsevier B.V. All rights reserved.

  3. A useful organofunctionalized layered silicate for textile dye removal

    Energy Technology Data Exchange (ETDEWEB)

    Royer, Betina; Cardoso, Natali F. [Institute of Chemistry, Federal University of Rio Grande do Sul, UFRGS, Av. Bento Goncalves 9500, P.O. Box 15003, 91501-970 Porto Alegre, Rio Grande do Sul (Brazil); Lima, Eder C., E-mail: eder.lima@ufrgs.br [Institute of Chemistry, Federal University of Rio Grande do Sul, UFRGS, Av. Bento Goncalves 9500, P.O. Box 15003, 91501-970 Porto Alegre, Rio Grande do Sul (Brazil); Macedo, Thais R.; Airoldi, Claudio [Institute of Chemistry, University of Campinas, UNICAMP, P.O. Box 6154, 13084-971 Campinas, Sao Paulo (Brazil)

    2010-09-15

    The octosilicate Na-RUB-18 has the ability to exchange its original sodium with cetyltrimethylammonium cations. This procedure leads to interlayer space expansion, with the aim of obtaining inorganic-organic nanostructured hybrids by chemical modification reactions. The silylating agent 3-trimethoxysilylpropylurea was attached to the inorganic layer using heterogeneous methodology. The new organofunctionalized material was characterized by elemental analysis, X-ray diffraction, {sup 13}C and {sup 29}Si nuclear magnetic resonances in the solid state, infrared spectroscopy, thermogravimetry and scanning electron microscopy. The amount of silylating agent immobilized on surface was 2.03 mmol g{sup -1}, with a basal distance of 2.43 nm. Nuclear magnetic resonance of {sup 13}C and {sup 29}Si nuclei evidenced covalent bond formation between organosilyl and silanol groups at the surface. The new synthesized nanostructured layered material was able to remove the textile dye Reactive Black 5 from aqueous solution, followed through a batchwise process. The effects of stirring time, adsorbent dosage and pH on the adsorption capacity demonstrated that 150 min is enough to reach equilibrium at 298 {+-} 1 K at pH 3.0. Based on error function values the data were best fitted to fractional-order kinetic models and compared to pseudo-first-order, pseudo-second-order and chemisorption kinetic models. The equilibrium data were better fitted to the Sips isotherm models.

  4. A novel family of ordered, mesoporous inorganic/organic hybrid polymers containing covalently and multiply bound microporous organic hosts.

    Science.gov (United States)

    Liu, Chunqing; Lambert, Joseph B; Fu, Lei

    2003-05-28

    We have prepared a new family of periodic hybrid polymers containing microporous cavities provided by covalently bound organic hosts. Cyclodextrin (CD) or calixarene (CX) hosts are attached to four or more trialkoxysilyl groups, which are polymerized to form a polysilsesquioxane matrix. Structural integrity is provided by copolymerization with tetraethoxysilane, which produces a polysilicate co-matrix. Periodic order is created by carrying out the polymerization in the presence of a surfactant, cetyltrimethylammonium bromide. The resulting as-synthesized polymers from these three starting materials were characterized by solid-state nuclear magnetic resonance spectroscopy. The (13)C and (29)Si spectra provided evidence for intact polysilsesquioxane, polysilicate, organic host, and surfactant. Removal of the surfactant by washing produced a polymer containing cavities of mesoporous dimensions, in addition to the microporous host cavities. The purpose of introducing mesoporosity is to allow enhanced access of guests to the microporous hosts. Transmission electron microscopy demonstrated that both as-synthesized and solvent-extracted polymers have a periodic structure. All polymers are completely insoluble in water. The as-synthesized CD-containing polymers extracted up to >99% of 4-nitrophenol from aqueous solution, and the solvent-extracted CX-containing polymers extracted up to 67% of Fe(3+) and lesser amounts of other metal cations from aqueous solution, with interesting selectivity patterns. Simple filtration then removes the polymer containing the extracted organic molecule or metal cation. These extraction abilities are superior to previous materials.

  5. Innovation in Layer-by-Layer Assembly.

    Science.gov (United States)

    Richardson, Joseph J; Cui, Jiwei; Björnmalm, Mattias; Braunger, Julia A; Ejima, Hirotaka; Caruso, Frank

    2016-12-14

    Methods for depositing thin films are important in generating functional materials for diverse applications in a wide variety of fields. Over the last half-century, the layer-by-layer assembly of nanoscale films has received intense and growing interest. This has been fueled by innovation in the available materials and assembly technologies, as well as the film-characterization techniques. In this Review, we explore, discuss, and detail innovation in layer-by-layer assembly in terms of past and present developments, and we highlight how these might guide future advances. A particular focus is on conventional and early developments that have only recently regained interest in the layer-by-layer assembly field. We then review unconventional assemblies and approaches that have been gaining popularity, which include inorganic/organic hybrid materials, cells and tissues, and the use of stereocomplexation, patterning, and dip-pen lithography, to name a few. A relatively recent development is the use of layer-by-layer assembly materials and techniques to assemble films in a single continuous step. We name this "quasi"-layer-by-layer assembly and discuss the impacts and innovations surrounding this approach. Finally, the application of characterization methods to monitor and evaluate layer-by-layer assembly is discussed, as innovation in this area is often overlooked but is essential for development of the field. While we intend for this Review to be easily accessible and act as a guide to researchers new to layer-by-layer assembly, we also believe it will provide insight to current researchers in the field and help guide future developments and innovation.

  6. Temperature-dependent electronic properties of inorganic-organic hybrid halide perovskite (CH3NH3PbBr3) single crystal

    Science.gov (United States)

    Cui, Xiaolei; Yuan, Sijian; Zhang, Huotian; Zhang, Xin; Wang, Pengfei; Tu, Li; Sun, Zhengyi; Wang, Jiao; Zhan, Yiqiang; Zheng, Lirong

    2017-12-01

    In this paper, the temperature-dependent electronic properties of inorganic-organic hybrid halide perovskite (CH3NH3PbBr3) single crystals are investigated. The dynamic current-time measurement results at different temperatures directly demonstrate that the electrical properties of the perovskite single crystal are dependent on the work temperature. We find that the Poole-Frankel conduction mechanism fits the current-voltage curves at small bias voltage (0-1 V) under darkness, which is mainly attributed to the surface defect states. The capability of carriers de-trapping from defects varies with different work temperatures, resulting in an increased current as the temperature increases under both darkness and illumination. In addition, the different transient photocurrent responses of incident light at two wavelengths (470 nm, 550 nm) further confirm the existence of defect states on the single crystal surface.

  7. Shape and size control of nano dispersed Mg/Al layered double hydroxide.

    Science.gov (United States)

    Panda, H S; Srivastava, R; Bahadur, D

    2008-08-01

    Controlling the shape and size of the layered inorganic-organic hybrid particles is a challenge with conventional methods of synthesis. The co-precipitation method has been modified to synthesize Mg/Al Layered double hydroxide by controlling the particle growth using ultrasonic wave at the time of nucleation. In this project, magnesium and aluminum ions were considered as model systems with carbonate anion as intercalating agent. The resulting particles are compared with those of LDHs produced by conventional co-precipitation method at constant pH. Powder X-ray diffraction confirmed formation of the layered double hydroxide phases having crystallite size 19-20 nm in both 'a' and 'c' crystallographic directions. Transmission electron microscope and dynamic light scattering revealed nano disperse hexagonal platelets with narrow size distribution and average size was around 48 nm. The modified method reduces the particle size, increases the surface charge, narrows down the size distribution and also reduces the aspect ratio of the particles. Therefore, it is suggested that low amplitude ultrasonic wave prevents the aggregation of the nuclei, thus restricting the particle growth and results in uniform size particles.

  8. Inorganic-organic hybrid polymer electrolyte based on polysiloxane/poly(maleic imide-co-styrene) network

    Energy Technology Data Exchange (ETDEWEB)

    Kuo, P.-L.; Jheng, W.-H.; Chen, W.-F. [Department of Chemical Engineering, National Cheng Kung University, Tainan City 70101 (China); Liang, W.-J. [Fire Protection and Safety Research Center, National Cheng Kung University, Tainan City (China)

    2010-10-01

    Covalently cross-linked nonfluorinated hydrocarbon ionomers are synthesized by introducing sulfonate groups and a siloxane cross-linker through thermally and chemically stable imide bonding on poly(styrene-co-maleic anhydride). The three-dimensional polysiloxane framework, which does not only act as a robust scaffold but also provide sites for the hydrogen bonding with water, contribute to the increase in bound water degree, higher proton conductivity at lower ion exchange capacity, and greatly decreased methanol permeability. The spherical-shaped ionic clusters produce a comparable proton conductivity (10{sup -1} S cm{sup -1} above 60 C) to Nafion-117. The conductivity of the hybrid ionomer does not decrease to gain its selectivity, but instead increased. Methanol permeability is {proportional_to}70% lower than that of Nafion-117, but has a higher water uptake and IEC. The membrane with IEC values of 1.1 mequiv. g{sup -1} exhibits a constant conductivity for 200 h in hydrolytic stability test, and produce a power density 20% higher than Nafion-117 in single DMFC operation. (author)

  9. Magnetic graphene coated inorganic-organic hybrid nanocomposite for enhanced preconcentration of selected pesticides in tomato and grape.

    Science.gov (United States)

    Rashidi Nodeh, Hamid; Sereshti, Hassan; Gaikani, Hamid; Kamboh, Muhammad Afzal; Afsharsaveh, Zahra

    2017-08-04

    The new magnetic graphene based hybrid silica-N-[3-(trimethoxysilyl)propyl]ethylenediamine (MG@SiO 2 -TMSPED) nanocomposite was synthesized via sol-gel process, and used as an effective adsorbent in magnetic solid phase extraction (MSPE) of three selected pesticides followed by gas chromatography micro-electron capture detection (GC-μECD). The adsorbent was characterized using Fourier transform-infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), Barrett-Joyner-Halenda (BJH), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDXS) techniques. The analytical validity of the developed method was evaluated under optimized conditions and the following figures of merit were obtained: linearity, 1-20μgkg -1 with good determination coefficients (R 2 =0.995-0.999); limits of detection (LODs), 0.23-0.30μgkg -1 (3×SD/m, n=3); and limits of quantitation (LOQ), 0.76-1.0μgkg -1 (10×SD/m, n=3). The precision (RSD%) of the proposed MSPE method was studied based on intra-day (3.43-8.83%, n=3) and inter-day (6.68-8.37%, n=12) precisions. Finally, the adsorbent was applied to determination of pesticides in tomato and grape samples and good recoveries were obtained in the range from 82 to 113% (RSDs 5.1-8.1%, n=3). Copyright © 2017 Elsevier B.V. All rights reserved.

  10. High Performance, Low Operating Voltage n-Type Organic Field Effect Transistor Based on Inorganic-Organic Bilayer Dielectric System

    Science.gov (United States)

    Dey, A.; Singh, A.; Kalita, A.; Das, D.; Iyer, P. K.

    2016-04-01

    The performance of organic field-effect transistors (OFETs) fabricated utilizing vacuum deposited n-type conjugated molecule N,N’-Dioctadecyl-1,4,5,8-naphthalenetetracarboxylic diimide (NDIOD2) were investigated using single and bilayer dielectric system over a low-cost glass substrate. Single layer device structure consists of Poly (vinyl alcohol) (PVA) as the dielectric material whereas the bilayer systems contain two different device configuration namely aluminum oxide/Poly (vinyl alcohol) (Al2O3/PVA) and aluminum oxide/Poly (methyl mefhacrylate) (Al2O3/PMMA) in order to reduce the operating voltage and improve the device performance. It was observed that the devices with Al2O3/PMMA bilayer dielectric system and top contact aluminum electrodes exhibit excellent n-channel behaviour under vacuum compared to the other two structures with electron mobility value of 0.32 cm2/Vs, threshold voltages ~1.8 V and current on/off ratio ~104, operating under a very low voltage (6 V). These devices demonstrate highly stable electrical behaviour under multiple scans and low threshold voltage instability in vacuum condition even after 7 days than the Al2O3/PVA device structure. This low operating voltage, high performance OTFT device with bilayer dielectric system is expected to have diverse applications in the next generation of OTFT technologies.

  11. Surface tensions of multi-component mixed inorganic/organic aqueous systems of atmospheric significance: measurements, model predictions and importance for cloud activation predictions

    Directory of Open Access Journals (Sweden)

    D. O. Topping

    2007-01-01

    Full Text Available In order to predict the physical properties of aerosol particles, it is necessary to adequately capture the behaviour of the ubiquitous complex organic components. One of the key properties which may affect this behaviour is the contribution of the organic components to the surface tension of aqueous particles in the moist atmosphere. Whilst the qualitative effect of organic compounds on solution surface tensions has been widely reported, our quantitative understanding on mixed organic and mixed inorganic/organic systems is limited. Furthermore, it is unclear whether models that exist in the literature can reproduce the surface tension variability for binary and higher order multi-component organic and mixed inorganic/organic systems of atmospheric significance. The current study aims to resolve both issues to some extent. Surface tensions of single and multiple solute aqueous solutions were measured and compared with predictions from a number of model treatments. On comparison with binary organic systems, two predictive models found in the literature provided a range of values resulting from sensitivity to calculations of pure component surface tensions. Results indicate that a fitted model can capture the variability of the measured data very well, producing the lowest average percentage deviation for all compounds studied. The performance of the other models varies with compound and choice of model parameters. The behaviour of ternary mixed inorganic/organic systems was unreliably captured by using a predictive scheme and this was dependent on the composition of the solutes present. For more atmospherically representative higher order systems, entirely predictive schemes performed poorly. It was found that use of the binary data in a relatively simple mixing rule, or modification of an existing thermodynamic model with parameters derived from binary data, was able to accurately capture the surface tension variation with concentration. Thus

  12. Highly selective fluorescent chemosensor for Zn2+ derived from inorganic-organic hybrid magnetic core/shell Fe3O4@SiO2 nanoparticles.

    Science.gov (United States)

    Wang, Yujiao; Peng, Xiaohong; Shi, Jinmin; Tang, Xiaoliang; Jiang, Jie; Liu, Weisheng

    2012-01-25

    Magnetic nanoparticles with attractive optical properties have been proposed for applications in such areas as separation and magnetic resonance imaging. In this paper, a simple and novel fluorescent sensor of Zn2+ was designed with 3,5-di-tert-butyl-2-hydroxybenzaldehyde [DTH] covalently grafted onto the surface of magnetic core/shell Fe3O4@SiO2 nanoparticles [NPs] (DTH-Fe3O4@SiO2 NPs) using the silanol hydrolysis approach. The DTH-Fe3O4@SiO2 inorganic-organic hybrid material was characterized by transmission electron microscopy, dynamic light scattering, X-ray power diffraction, diffuse reflectance infrared Fourier transform, UV-visible absorption and emission spectrometry. The compound DTH exhibited fluorescence response towards Zn2+ and Mg2+ ions, but the DTH-Fe3O4@SiO2 NPs only effectively recognized Zn2+ ion by significant fluorescent enhancement in the presence of various ions, which is due to the restriction of the N-C rotation of DTH-Fe3O4@SiO2 NPs and the formation of the rigid plane with conjugation when the DTH-Fe3O4@SiO2 is coordinated with Zn2+. Moreover, this DTH-Fe3O4@SiO2 fluorescent chemosensor also displayed superparamagnetic properties, and thus, it can be recycled by magnetic attraction.

  13. Transition metal modified and partially calcined inorganic-organic pillared clays for the adsorption of salicylic acid, clofibric acid, carbamazepine, and caffeine from water.

    Science.gov (United States)

    Cabrera-Lafaurie, Wilman A; Román, Félix R; Hernández-Maldonado, Arturo J

    2012-11-15

    Pharmaceutical and Personal Care Products (PPCPs) are considered emerging contaminants, and their efficient removal from water is going to be a challenging endeavor. Microporous adsorbent materials, including pillared clays, could offer a potential solution if tailored properly. Although pillared clays have been employed previously for the removal of organics, the effective removal of PPCPs will only be possible if their surface and textural properties are manipulated from the bottom-up. This work presents the use of modified inorganic-organic pillared clays (IOCs) for the adsorption of salicylic acid, clofibric acid, carbamazepine, and caffeine. The IOCs have been modified with Co(2+), Cu(2+), or Ni(2+) to induce complexation-like adsorbate-adsorbent interactions at ambient conditions, in an attempt to provide an efficient and yet reversible driving force in the sub-ppm concentration range. Furthermore, the IOCs were partially calcined to increase effective surface area by an order of magnitude while preserving some hydrophobicity. In general, the Ni(2+) IOCs exhibited the greatest interaction with salicylic and clofibric acids, respectively, while the Co(2+) adsorbents excelled at adsorbing caffeine at low concentrations. All of the metal-modified IOCs showed comparable adsorption capacities for the case of carbamazepine, probably due to the lack of availability of particular functional groups in this adsorbate. Copyright © 2012 Elsevier Inc. All rights reserved.

  14. Room-temperature polar order in [NH4][Cd(HCOO)3]--a hybrid inorganic-organic compound with a unique perovskite architecture.

    Science.gov (United States)

    Gómez-Aguirre, L C; Pato-Doldán, B; Stroppa, A; Yáñez-Vilar, S; Bayarjargal, L; Winkler, B; Castro-García, S; Mira, J; Sánchez-Andújar, M; Señarís-Rodríguez, M A

    2015-03-02

    We report on the hybrid inorganic-organic ammonium compound [NH4][Cd(HCOO)3], which displays a most unusual framework structure: instead of the expected 4(9)·6(6) topology, it shows an ABX3 perovskite architecture with the peculiarity and uniqueness (among all the up-to-date reported hybrid metal formates) that the Cd ions are connected only by syn-anti formate bridges, instead of anti-anti ones. This change of the coordination mode of the formate ligand is thus another variable that can provide new possibilities for tuning the properties of these versatile functional metal-organic framework materials. The room-temperature crystal structure of [NH4][Cd(HCOO)3] is noncentrosymmetric (S.G.: Pna21) and displays a polar axis. DFT calculations and symmetry mode analysis show that the rather large polarization arising from the off-center shift of the ammonium cations in the cavities (4.33 μC/cm(2)) is partially canceled by the antiparallel polarization coming from the [Cd(HCOO)3](-) framework, thus resulting in a net polarization of 1.35 μC/cm(2). As shown by second harmonic generation studies, this net polarization can be greatly increased by applying pressure (Pmax = 14 GPa), an external stimulus that, in turn, induces the appearance of new structural phases, as confirmed by Raman spectroscopy.

  15. Engineered Inorganic/Organic-Core/Shell Magnetic FexOy Nanoparticles with Oleic Acid and/or Oleylamine As Capping Agents.

    Science.gov (United States)

    Harris, Richard Anthony; van der Walt, Hendriëtte; Shumbula, Poslet Morgan

    2015-01-01

    Magnetic nanoparticles with tailored surface chemistry are widely used for a number of different in vivo applications, ranging from tissue repair and magnetic cell separation through to cancer-hyperthermia, drug delivery and magnetic resonance imaging contrast enhancement. A major requirement for all these biomedical applications is that these nanoparticles must have high magnetization values and sizes smaller than 100 nm with a narrow particle size distribution. Thus nanoparticles must have uniform physical and chemical properties. For these applications, a tailored surface coating/shell needs to be engineered, which has to be non-toxic, biocompatible and make allowance for targetable drug delivery with particle localization in a targeted area. Most work in this field has been done on improving the biocompatibility of the nanoparticles. Only a few scientific investigations have been carried out on improving the quality of magnetic nanoparticles with specific focus on the nanoparticle's surface chemistry, size distribution and shape (which directly influences the magnetic properties). All these particles also need to be properly characterized in order to get a protocol for the quality control of these particles, the nature of the surface coatings and their subsequent geometric arrangement. This will ultimately determine the overall size of the colloids and also plays a significant role in biokinetics and biodistribution of nanoparticles in the body. This review highlights recent advances in the synthetic chemistry, magnetic characterization and biological applications of inorganic/organic - core/shell FexOy based magnetic nanoparticles with specific focus on using the two popular surfactants for producing MNPs namely oleic acid and/or oleylamine as capping agents. Although the main nano-magnets under discussion are magnetite (Fe3O4) nanoparticles, maghemite (γ-Fe2O3) is also briefly mentioned.

  16. Inorganic-organic hybrid materials with different dimensions constructed from copper-fluconazole metal-organic units and Keggin polyanion clusters.

    Science.gov (United States)

    Li, Shun-Li; Lan, Ya-Qian; Ma, Jian-Fang; Yang, Jin; Liu, Jie; Fu, Yao-Mei; Su, Zhong-Min

    2008-04-21

    Inorganic-organic hybrid materials based on Keggin polyoxometalate building blocks combined with Cu(II)/Cu(I) and flexible fluconazole ligand [1-(2,4-difluorophenyl)-1,1-bis[(1H-1,2,4-triazol-1-yl)methyl]methanol] (Hfcz) have been obtained by hydrothermal methods, namely, [Cu(II)(2)(Hfcz)(4)(SiW(12)O(40))].3H(2)O (1), [Cu(II)(4)(fcz)(4)(H(2)O)(4)(SiMo(12)O(40))].6H(2)O (2), [Cu(II)(2)(fcz)(2)][Cu(II)(4)(fcz)(4)(SiW(12)O(40))][Cu(II)(2)(fcz)(2)(H(2)O)(2)(SiW(12)O(40))].6H(2)O (3), (Et(3)NH)(2)[Cu(I)(2)(Hfcz)(2)(SiW(12)O(40))].2H(2)O (4), (Et(3)NH)(2)[Cu(I)(2)(Hfcz)(2)(SiW(12)O(40))].H(2)O (5) and [Cu(I)(4)(Hfcz)(4)(SiMo(12)O(40))] (6). Their structures have been determined by single-crystal X-ray diffraction analyses, and the compounds are further characterized by elemental analyses, IR spectra and thermogravimetric (TG) analyses. In 1, Cu(II) cations are bridged by fluconazole ligands to form a 3D lvt coordination polymeric network, which is connected by (SiW(12)O(40))(4-) anions to form a complicated 3D (4,6)-connected framework with the topology of (4(2).6(4))(4(6).6(7).8(2))(2). In 2, two fcz(-) anions chelate two Cu(2+) cations to form a [Cu(fcz)](2)(2+) dimer, which is bridged by (SiW(12)O(40))(4-) polyanions to generate a 2D (4,4) grid. Compound 3 is formed by three types of co-crystallizing subunits including a dimer [Cu(fcz)](2)(2+), a dumbbell molecule [Cu(4)(fcz)(4)(SiW(12)O(40))] and an infinite chain {[Cu(2)(fcz)(2)(H(2)O)(2)(SiW(12)O(40))](2-)}(infinity). In compounds 4 and 5, Hfcz ligands link Cu(+) cations to generate 1D coordination polymeric units, and (SiW(12)O(40))(4-) polyanions connect these metal-organic units to form two types of (6(3)) sheets which are topological isomerism. In compound 6, (SiMo(12)O(40))(4-) polyanions fixed in Cu(I)-Hfcz square rings are further extended into a 2D sheet via linking Cu(I) atoms of different rings. By carefully inspection of the structures of 1-6, it is believed that various transition-metal organic units

  17. Semitransparent ZnO/poly(3,4-ethylenedioxythiophene) based hybrid inorganic/organic heterojunction thin film diodes prepared by combined radio-frequency magnetron-sputtering and electrodeposition techniques

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez-Moreno, Jorge; Navarrete-Astorga, Elena; Martin, Francisco [Laboratorio de Materiales y Superficies (Unidad Asociada al CSIC), Departamentos de Fisica Aplicada and Ing. Quimica, Universidad de Malaga, E29071 Malaga (Spain); Schrebler, Ricardo [Instituto de Quimica, Facultad de Ciencias, Pontificia Universidad Catolica de Valparaiso, Casilla 4059, Valparaiso (Chile); Ramos-Barrado, Jose R. [Laboratorio de Materiales y Superficies (Unidad Asociada al CSIC), Departamentos de Fisica Aplicada and Ing. Quimica, Universidad de Malaga, E29071 Malaga (Spain); Dalchiele, Enrique A., E-mail: dalchiel@fing.edu.uy [Instituto de Fisica, Facultad de Ingenieria, Herrera y Reissig 565, C.C. 30, 11000 Montevideo (Uruguay)

    2012-12-15

    n-ZnO/p-poly(3,4-ethylenedioxythiophene) (PEDOT) semitransparent inorganic-organic hybrid vertical heterojunction thin film diodes have been fabricated with PEDOT and ZnO thin films grown by electrodeposition and radio-frequency magnetron-sputtering respectively, onto a tin doped indium oxide coated glass substrate. The diode exhibited an optical transmission of {approx} 40% to {approx} 50% in the visible region between 450 and 700 nm. The current-voltage (I-V) characteristics of the heterojunction show good rectifying diode characteristics, with a ratio of forward current to the reverse current as high as 35 in the range - 4 V to + 4 V. The I-V characteristic was examined in the framework of the thermionic emission model. The ideality factor and barrier height were obtained as 4.0 and 0.88 eV respectively. - Highlights: Black-Right-Pointing-Pointer Semitransparent inorganic-organic heterojunction thin film diodes investigated Black-Right-Pointing-Pointer n-ZnO/p-poly(3,4-ethylenedioxythipohene) used for the heterojunction Black-Right-Pointing-Pointer Diodes exhibited an optical transmission of {approx} 40%-{approx} 50% in the visible region Black-Right-Pointing-Pointer Heterojunction current-voltage features show good rectifying diode characteristics Black-Right-Pointing-Pointer A forward to reverse current ratio as high as 35 (- 4 V to + 4 V range) was attained.

  18. Inorganic-organic hybrid silica based tin complex as a novel, highly efficient and recyclable heterogeneous catalyst for the one-pot preparation of spirooxindoles in water.

    Science.gov (United States)

    Ghahremanzadeh, Ramin; Rashid, Zahra; Zarnani, Amir-Hassan; Naeimi, Hossein

    2014-11-14

    In the present study, a tin complex immobilized on silica gel as a novel, green, highly efficient and heterogeneous reusable catalyst was synthesized by grafting 2-amino benzamide onto the silica gel surface as a result of the reaction between isatoic anhydride and 3-aminopropyl-functionalized silica gel, followed by complexing with tin chloride. The resulting organic-inorganic hybrid material was evaluated in the one-pot three-component synthesis of spiro[indoline-pyrazolo[4',3':5,6]pyrido[2,3-d]pyrimidine]trione derivatives in water via the condensation reaction of isatins, barbituric acids, and 1H-pyrazol-5-amines. All the reactions were completed in short reaction times and all the products were obtained in high to excellent yields with high purity. In addition, the synthesized novel catalyst could be separated from the reaction mixture by simple filtration and can be reused up to seven runs without significant loss in activity.

  19. Low-temperature, solution-processed ZrO2:B thin film: a bifunctional inorganic/organic interfacial glue for flexible thin-film transistors.

    Science.gov (United States)

    Park, Jee Ho; Oh, Jin Young; Han, Sun Woong; Lee, Tae Il; Baik, Hong Koo

    2015-03-04

    A solution-processed boron-doped peroxo-zirconium oxide (ZrO2:B) thin film has been found to have multifunctional characteristics, providing both hydrophobic surface modification and a chemical glue layer. Specifically, a ZrO2:B thin film deposited on a hydrophobic layer becomes superhydrophilic following ultraviolet-ozone (UVO) treatment, whereas the same treatment has no effect on the hydrophobicity of the hydrophobic layer alone. Investigation of the ZrO2:B/hydrophobic interface layer using angle-resolved X-ray photoelectron spectroscopy (AR XPS) confirmed it to be chemically bonded like glue. Using the multifunctional nature of the ZrO2:B thin film, flexible amorphous indium oxide (In2O3) thin-film transistors (TFTs) were subsequently fabricated on a polyimide substrate along with a ZrO2:B/poly-4-vinylphenol (PVP) dielectric. An aqueous In2O3 solution was successfully coated onto the ZrO2:B/PVP dielectric, and the surface and chemical properties of the PVP and ZrO2:B thin films were analyzed by contact angle measurement, atomic force microscopy (AFM), Fourier transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The surface-engineered PVP dielectric was found to have a lower leakage current density (Jleak) of 4.38 × 10(-8) A/cm(2) at 1 MV/cm, with no breakdown behavior observed up to a bending radius of 5 mm. In contrast, the electrical characteristics of the flexible amorphous In2O3 TFT such as on/off current ratio (Ion/off) and electron mobility remained similar up to 10 mm of bending without degradation, with the device being nonactivated at a bending radius of 5 mm. These results suggest that ZrO2:B thin films could be used for low-temperature, solution-processed surface-modified flexible devices.

  20. An automated Teflon microfluidic peptide synthesizer.

    Science.gov (United States)

    Zheng, Hui; Wang, Weizhi; Li, Xiaojun; Wang, Zihua; Hood, Leroy; Lausted, Christopher; Hu, Zhiyuan

    2013-09-07

    We present a microfluidic synthesizer made entirely of Teflon material for solid phase peptide synthesis (SPPS). Solvent-resistant perfluoroalkoxy (PFA) was used to construct chip-sized devices featuring multiple tri-layer pneumatic microvalves. Using these devices, model peptides were automatically synthesized and cleaved in situ in a continuous-flow manner. The total coupling and cleavage time was significantly reduced compared to conventional bulk reactors. The synthesis of a decapeptide, for instance, took less than 6 h using our device while it usually takes more than three days using conventional reactors.

  1. Nanostructured films of inorganic-organic hybrid materials for application in photovoltaics; Nanostrukturierte Filme aus anorganisch-organischen Hybridmaterialien fuer die Photovoltaik

    Energy Technology Data Exchange (ETDEWEB)

    Perlich, Jan

    2009-06-25

    Nanostructured thin films of crystalline TiO{sub 2} for applications in photovoltaics were studied. The fabrication of the thin films is based on a hybrid approach. The anorganic metal oxide prepared via a sol-gel synthesis is structurated by the template properties of the applied organic block-copolymer. Via the film epitaxy by means of centrifugal coating first hybrid films (polymer-nanocomposite films) were fabricated, which were changed by calcination into crystalline TiO{sub 2} films with taylored morphology. The successful development of novel preparation approaches to the adaption to consisting conditions in the application field of photovoltaics contains a route to the fine-tuning of the morphology as well as the fabrication of hierarchical morphologies in different configurations. The structural study of the single nanostructurated TiO{sub 2} films up to the functional multilayer arrangement as photovoltaic demonstration cell was performed with conventionally imaging methods, as for instance scanning force microscopy and electron microscopy as well as the special small-angle X-ray scattering method under rigid incident angle (GISAXS). [German] Es wurden nanostrukturierte duenne Filme aus kristallinem TiO{sub 2} fuer Anwendungen in der Photovoltaik untersucht. Die Herstellung der duennen Filme basiert auf einem Hybridansatz. Das ueber eine Sol-Gel-Synthese bereitgestellte anorganische Metalloxid wird durch die Template-Eigenschaften des eingesetzten organischen Block-Copolymers strukturiert. Ueber die Filmaufbringung mittels Schleuderbeschichtung wurden zunaechst Hybridfilme (Polymer-Nanokompositfilme) hergestellt, die durch Kalzinierung in kristalline TiO{sub 2}-Filme mit massgeschneiderter Morphologie umgewandelt werden. Die erfolgreiche Entwicklung von neuartigen Praeparationsansaetzen zur Adaption an bestehende Gegebenheiten im Anwendungsgebiet der Photovoltaik beinhaltet eine Route zur Feineinstellung der Morphologie sowie die Herstellung von

  2. Synthesized Digital Mammography Imaging.

    Science.gov (United States)

    Freer, Phoebe E; Winkler, Nicole

    2017-05-01

    Synthesized mammography (SM) is a new imaging technique similar to digital mammography constructed from an acquired digital breast tomosynthesis (DBT) examination. SM allows for widespread screening using DBT, maintaining the benefits of DBT while decreasing the radiation of DBT by nearly half. This article reviews studies evaluating SM, most of which suggest that SM may be appropriate to use clinically to replace an actual acquired conventional 2-dimensional full-field digital mammogram (FFDM) when using DBT for breast cancer screening. These results should be interpreted with caution because there are inherent differences between SM and FFDM image quality and lesion visibility and larger, more robust studies still need to be performed. Copyright © 2017 Elsevier Inc. All rights reserved.

  3. Doclet To Synthesize UML

    Science.gov (United States)

    Barry, Matthew R.; Osborne, Richard N.

    2005-01-01

    The RoseDoclet computer program extends the capability of Java doclet software to automatically synthesize Unified Modeling Language (UML) content from Java language source code. [Doclets are Java-language programs that use the doclet application programming interface (API) to specify the content and format of the output of Javadoc. Javadoc is a program, originally designed to generate API documentation from Java source code, now also useful as an extensible engine for processing Java source code.] RoseDoclet takes advantage of Javadoc comments and tags already in the source code to produce a UML model of that code. RoseDoclet applies the doclet API to create a doclet passed to Javadoc. The Javadoc engine applies the doclet to the source code, emitting the output format specified by the doclet. RoseDoclet emits a Rose model file and populates it with fully documented packages, classes, methods, variables, and class diagrams identified in the source code. The way in which UML models are generated can be controlled by use of new Javadoc comment tags that RoseDoclet provides. The advantage of using RoseDoclet is that Javadoc documentation becomes leveraged for two purposes: documenting the as-built API and keeping the design documentation up to date.

  4. Electronic conductivity of mechanochemically synthesized ...

    Indian Academy of Sciences (India)

    Vol. 67, No. 2. — journal of. August 2006 physics pp. 331–340. Electronic conductivity of mechanochemically synthesized nanocrystalline Ag1−xCuxI system using DC polarization technique∗ .... 0.15, 0.25 were synthesized by mechanical grinding in a 6 agate mortar and pestle for 5 h at room temperature in an ...

  5. RAMESES publication standards: realist syntheses

    Directory of Open Access Journals (Sweden)

    Wong Geoff

    2013-01-01

    Full Text Available Abstract Background There is growing interest in realist synthesis as an alternative systematic review method. This approach offers the potential to expand the knowledge base in policy-relevant areas - for example, by explaining the success, failure or mixed fortunes of complex interventions. No previous publication standards exist for reporting realist syntheses. This standard was developed as part of the RAMESES (Realist And MEta-narrative Evidence Syntheses: Evolving Standards project. The project's aim is to produce preliminary publication standards for realist systematic reviews. Methods We (a collated and summarized existing literature on the principles of good practice in realist syntheses; (b considered the extent to which these principles had been followed by published syntheses, thereby identifying how rigor may be lost and how existing methods could be improved; (c used a three-round online Delphi method with an interdisciplinary panel of national and international experts in evidence synthesis, realist research, policy and/or publishing to produce and iteratively refine a draft set of methodological steps and publication standards; (d provided real-time support to ongoing realist syntheses and the open-access RAMESES online discussion list so as to capture problems and questions as they arose; and (e synthesized expert input, evidence syntheses and real-time problem analysis into a definitive set of standards. Results We identified 35 published realist syntheses, provided real-time support to 9 on-going syntheses and captured questions raised in the RAMESES discussion list. Through analysis and discussion within the project team, we summarized the published literature and common questions and challenges into briefing materials for the Delphi panel, comprising 37 members. Within three rounds this panel had reached consensus on 19 key publication standards, with an overall response rate of 91%. Conclusion This project used multiple

  6. Drude conductivity exhibited by chemically synthesized reduced graphene oxide

    Science.gov (United States)

    Younas, Daniyal; Javed, Qurat-ul-Ain; Fatima, Sabeen; Kalsoom, Riffat; Abbas, Hussain; Khan, Yaqoob

    2017-09-01

    Electrical conductance in graphene layers having Drude like response due to massless Dirac fermions have been well explained theoretically as well as experimentally. In this paper Drude like electrical conductivity response of reduced graphene oxide synthesized by chemical route is presented. A method slightly different from conventional methods is used to synthesize graphene oxide which is then converted to reduced graphene oxide. Various analytic techniques were employed to verify the successful oxidation and reductions in the process and were also used to measure various parameters like thickness of layers and conductivity. Obtained reduced graphene oxide has very thin layers of thickness around 13 nm on average and reduced graphene oxide has average thickness below 20 nm. Conductivity of the reduced graphene was observed to have Drude like response which is explained on basis of Drude model for conductors.

  7. Frequency synthesizers concept to product

    CERN Document Server

    Chenakin, Alexander

    2011-01-01

    A frequency synthesizer is an electronic system for generating any of a range of frequencies from a single fixed oscillator. They are found in modern devices like radio receivers, mobile phones, and GPS systems. This comprehensive resource offers RF and microwave engineers a thorough overview of both well-established and recently developed frequency synthesizer design techniques. Professionals find expert guidance on all design aspects, including main architectures, key building blocks, and practical circuit implementation. Engineers learn the development process and gain a solid understanding

  8. Dielectric Mismatch Mediates Carrier Mobility in Organic-Intercalated Layered TiS2.

    Science.gov (United States)

    Wan, Chunlei; Kodama, Yumi; Kondo, Mami; Sasai, Ryo; Qian, Xin; Gu, Xiaokun; Koga, Kenji; Yabuki, Kazuhisa; Yang, Ronggui; Koumoto, Kunihito

    2015-10-14

    The dielectric constant is a key parameter that determines both optical and electronic properties of materials. It is desirable to tune electronic properties though dielectric engineering approach. Here, we present a systematic approach to tune carrier mobilities of hybrid inorganic/organic materials where layered two-dimensional transition-metal dichalcogenide TiS2 is electrochemically intercalated with polar organic molecules. By manipulating the dielectric mismatch using polar organic molecules with different dielectric constants, ranging from 10 to 41, the electron mobility of the TiS2 layers was changed three times due to the dielectric screening of the Coulomb-impurity scattering processes. Both the overall thermal conductivity and the lattice thermal conductivity were also found to decrease with an increasing dielectric mismatch. The enhanced electrical mobility along with the decreased thermal conductivity together gave rise to a significantly improved thermoelectric figure of merit of the hybrid inorganic/organic materials at room temperature, which might find applications in wearable electronics.

  9. Laboratory Syntheses of Insect Pheromones.

    Science.gov (United States)

    Cormier, Russell A.; Hoban, James N.

    1984-01-01

    Provides background information and procedures for the multi-step synthesis of tiger moth and boll weevil pheromones (sex attractants). These syntheses require several laboratory periods. The tiger moth pheromone synthesis is suitable for introductory organic chemistry while the boll weevil pheromone is recommended for an advanced laboratory…

  10. Information Retrieval for Ecological Syntheses

    Science.gov (United States)

    Bayliss, Helen R.; Beyer, Fiona R.

    2015-01-01

    Research syntheses are increasingly being conducted within the fields of ecology and environmental management. Information retrieval is crucial in any synthesis in identifying data for inclusion whilst potentially reducing biases in the dataset gathered, yet the nature of ecological information provides several challenges when compared with…

  11. Method of synthesizing pyrite nanocrystals

    Science.gov (United States)

    Wadia, Cyrus; Wu, Yue

    2013-04-23

    A method of synthesizing pyrite nanocrystals is disclosed which in one embodiment includes forming a solution of iron (III) diethyl dithiophosphate and tetra-alkyl-ammonium halide in water. The solution is heated under pressure. Pyrite nanocrystal particles are then recovered from the solution.

  12. Bioinspired total syntheses of terpenoids.

    Science.gov (United States)

    Hugelshofer, Cedric L; Magauer, Thomas

    2016-12-20

    Nature's highly efficient routes for constructing natural products have inspired chemists to mimic these processes in a laboratory setting. This Perspective presents some recent examples of conceptually different bioinspired total syntheses of complex terpenoids and thereby aims to highlight the vast benefits offered by bioinspired strategies.

  13. X-Band PLL Synthesizer

    Directory of Open Access Journals (Sweden)

    P. Kutin

    2006-04-01

    Full Text Available This paper deals with design and realization of a PLL synthesizer for the microwave X−band. The synthesizer is intended for use as a local oscillator in a K−band downconverter. The design goal was to achieve very low phase noise and spurious free signal with a sufficient power level. For that purpose a low phase noise MMIC VCO was used in phase locked loop. The PLL works at half the output frequency, therefore there is a frequency doubler at the output of the PLL. The output signal from the frequency doubler is filtered by a band-pass filter and finally amplified by a single stage amplifier.

  14. Effiziente chemoenzymatische Synthese von dhydroartemisinaldehyd

    OpenAIRE

    Demiray, Melodi; Tang, Xiaoping; Wirth, Thomas; Faraldos, Juan A.; Allemann, Rudolf K.

    2017-01-01

    Artemisinin aus der Pflanze Artemisia annua ist das wirkungsvollste Arzneimittel zur Behandlung von Malaria. Die Sesquiterpen-Cyclase Amorphadien-Synthase, ein Cytochrom-abhängiges CYP450 und eine Aldehyd-Reduktase wandeln in der Pflanze Farnesyl-Diphosphat (FDP) in Dihydroartemisinaldehyd (DHAAl) um, welches ein Schlüsselzwischenprodukt in der Biosynthese von Artemisinin und eine halbsynthetische Vorstufe in der chemischen Synthese des Arzneimittels ist. Hier berichten wir über einen chemoen...

  15. Raman and XPS study on Ta-C films synthesized by FCVAD

    CERN Document Server

    Wang Guang Fu; Zhang Hui Xing; Liu Yu Long

    2001-01-01

    Ta-C films are synthesized by filtered cathodic vacuum arc deposition method. The results of Raman and XPS show that the sp sup 3 content of the films synthesized at the substrate bias of 80 to 100 V can reach 80%, and there is a low sp sup 3 content layer on the surface of these films

  16. Solid phase syntheses of oligoureas

    Energy Technology Data Exchange (ETDEWEB)

    Burgess, K.; Linthicum, D.S.; Russell, D.H.; Shin, H.; Shitangkoon, A.; Totani, R.; Zhang, A.J.; Ibarzo, J. [Texas A& M Univ., College Station, TX (United States)

    1997-02-19

    Isocyanates 7 were formed from monoprotected diamines 3 or 6, which in turn can be easily prepared from commercially available N-BOC- or N-FMOC-protected amino acid derivatives. Isocyanates 7, formed in situ, could be coupled directly to a solid support functionalized with amine groups or to amino acids anchored on resins using CH{sub 2}Cl{sub 2} as solvent and an 11 h coupling time at 25 {degree}C. Such couplings afforded peptidomimetics with an N-phthaloyl group at the N-terminus. The optimal conditions identified for removal of the N-phthaloyl group were to use 60% hydrazine in DMF for 1-3 h. Several sequences of amino acids coupled to ureas (`peptidic ureas`) and of sequential urea units (`oligoureas`) were prepared via solid phase syntheses and isolated by HPLC. Partition coefficients were measured for two of these peptidomimetics, and their water solubilities were found to be similar to the corresponding peptides. A small library of 160 analogues of the YGGFL-amide sequence was prepared via Houghten`s tea bag methodology. This library was tested for binding to the anti-{beta}-endorphin monoclonal antibody. Overall, this paper describes methodology for solid phase syntheses of oligourea derivatives with side chains corresponding to some of the protein amino acids. The chemistry involved is ideal for high-throughput syntheses and screening operations. 51 refs., 3 figs., 2 tabs.

  17. Method of synthesizing tungsten nanoparticles

    Science.gov (United States)

    Thoma, Steven G; Anderson, Travis M

    2013-02-12

    A method to synthesize tungsten nanoparticles has been developed that enables synthesis of nanometer-scale, monodisperse particles that can be stabilized only by tetrahydrofuran. The method can be used at room temperature, is scalable, and the product concentrated by standard means. Since no additives or stabilizing surfactants are required, this method is particularly well suited for producing tungsten nanoparticles for dispersion in polymers. If complete dispersion is achieved due to the size of the nanoparticles, then the optical properties of the polymer can be largely maintained.

  18. Physiologically driven avian vocal synthesizer

    Science.gov (United States)

    Sitt, Jacobo D.; Arneodo, Ezequiel M.; Goller, Franz; Mindlin, Gabriel B.

    2010-03-01

    In this work, we build an electronic syrinx, i.e., a programmable electronic device capable of integrating biomechanical model equations for the avian vocal organ in order to synthesize song. This vocal prosthesis is controlled by the bird’s neural instructions to respiratory and the syringeal motor systems, thus opening great potential for studying motor control and its modification by sensory feedback mechanisms. Furthermore, a well-functioning subject-controlled vocal prosthesis can lay the foundation for similar devices in humans and thus provide directly health-related data and procedures.

  19. Molecular Syntheses of Extended Materials

    Science.gov (United States)

    Paley, Daniel W.

    Bottom-up molecular synthesis is a route to chemically and crystallographically uniform polymers and solid-state materials. Through the use of molecular precursors, we gain atomic-level control of functionality and fine-tuning of the collective properties of materials. This dissertation presents two studies that demonstrate this approach. Ring-opening alkyne metathesis polymerization is a possible approach to monodisperse conjugated polymers, but its applications have been limited by difficult syntheses and high air sensitivity of known organometallic ROAMP initiators. We designed a dimeric, air-stable molybdenum alkylidyne with a tris(phenolate) supporting ligand. The precatalyst is activated by addition of methanol and polymerizes cyclooctynes with excellent chemical selectivity and functional group tolerance. The Nuckolls and Roy groups have introduced a new family of solid-state compounds synthesized from cobalt chalcogenide clusters Co6Q 8(PR3)6 and fullerenes. The first examples of these materials crystallized in superatom lattices with the symmetry of simple inorganic solids CdI2 (P-3m1) and NaCl (Fm-3m). This dissertation reveals that further members of the family feature extraordinary diversity of structure, including a pseudo-trigonal array of fulleride dimers in [Co 6Te8(PEt3)6]2[C140 ][C70]2 and a heterolayered van der Waals cocrystal [Co6Se8(PEt2phen)6][C 60]5. In addition to these unusual crystal structures, this dissertation presents a method for assigning redox states from crystallographic data in Co6Q8 clusters. Finally, a detailed guide to the collection and solution of single-crystal X-ray data is presented. The guide is intended for independent study by new crystallographers.

  20. Legionella bozemanae synthesizes phosphatidylcholine from exogenous choline.

    Science.gov (United States)

    Palusinska-Szysz, Marta; Janczarek, Monika; Kalitynski, Rafal; Dawidowicz, Andrzej L; Russa, Ryszard

    2011-02-20

    The phospholipid class and fatty acid composition of Legionella bozemanae were determined using thin-layer chromatography, gas-liquid chromatography, and matrix-assisted laser desorption ionization-time of flight mass spectrometry. Phosphatidylcholine, phosphatidylethanolamine, and diphosphatidylglycerol were the predominant phospholipids, while phosphatidyl-N-monomethylethanolamine, phosphatidylglycerol, and phosphatidyl-N,N-dimethylethanolamine were present at low concentrations. With the use of the LC/MS technique, PC16:0/15:0, PC17:/15:0, and PE16:1/15:0 were shown to be the dominant phospholipid constituents, which may be taxonomically significant. Two independent phosphatidylcholine synthesis pathways (the three-step methylation and the one-step CDP-choline pathway) were present and functional in L. bozemanae. In the genome of L. bozemanae, genes encoding two potential phosphatidylcholine forming enzymes, phospholipid N-methyl transferase (PmtA) and phosphatidylcholine synthase (Pcs), homologous to L. longbeachae, L. drancourtii, and L. pneumophila pmtA and pcs genes were identified. Genes pmtA and pcs from L. bozemanae were sequenced and analyzed on nucleotide and amino acid levels. Bacteria grown on an artificial medium with labelled choline synthesized phosphatidylcholine predominantly via the phosphatidylcholine synthase pathway, which indicates that L. bozemanae phosphatidylcholine, similarly as in other bacteria associated with eukaryotes, is an important determinant of host-microbe interactions. Copyright © 2010 Elsevier GmbH. All rights reserved.

  1. Perception of Paralinguistic Traits in Synthesized Voices

    DEFF Research Database (Denmark)

    Baird, Alice Emily; Hasse Jørgensen, Stina; Parada-Cabaleiro, Emilia

    the paralinguistic traits of the synthesized voice. Using a corpus of 13 synthesized voices, constructed from acoustic concatenative speech synthesis, we assessed the response of 23 listeners from differing cultural backgrounds. Evaluating if the perception shifts from the known ground–truths, we asked listeners...... exploration into a more participatory and inclusive synthesized vocal identity....

  2. The preparation of an elastomer/silicate layer nanocompound with an exfoliated structure and a strong ionic interfacial interaction by utilizing an elastomer latex containing pyridine groups

    Energy Technology Data Exchange (ETDEWEB)

    He Shaojian; Wang Yiqing; Feng Yiping; Liu Qingsheng; Zhang Liqun, E-mail: zhanglq@mail.buct.edu.cn [Key Laboratory for Nanomaterials, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029 (China)

    2010-03-19

    A great variety of polymer/layered silicate (PLS) nanocomposites have been reported, however, there are few exfoliated PLS nanocomposites and their inorganic-organic interfaces are still a great problem, especially for the elastomers. In this research, a kind of exfoliated elastomer/silicate layer nanocompound was prepared and proved by XRD and TEM, in which 10 phr Na{sup +}-montmorillonite was dispersed in butadiene-styrene-vinyl pyridine rubber by latex compounding method with acidic flocculants. Moreover, a dynamic mechanical thermal analyzer (DMTA) suggested a strong interfacial interaction (interaction parameter B{sub H} = 4.91) between the silicate layers and macromolecules in addition to the weak inorganic-organic interfacial interaction, and solid state {sup 15}N NMR indicated the formation of a strong ionic interface through the acidifying pyridine. Subsequently, a remarkable improvement of the dispersing morphology, mechanical performance and gas barrier property appeared, compared to that using calcium ion flocculants. This supports the formation of an exfoliated structure and an improved interfacial interaction.

  3. Model Research On Synthesis Of Al2O3-C Layers By MOCVD

    Directory of Open Access Journals (Sweden)

    Sawka A.

    2015-06-01

    Full Text Available These are model studies whose aim is to obtain information that would allow development of new technology for synthesizing monolayers of Al2O3-C with adjusted microstructure on cemented carbides. The Al2O3-C layer will constitute an intermediate layer on which the outer layer of Al2O3 without carbon is synthesized. The purpose of the intermediate layer is to block the cobalt diffusion to the synthesized outer layer of Al2O3 and to stop the diffusion of air oxygen to the substrate during the synthesis of the outer layer. This layer should be thin, continuous, dense and uniform in thickness.

  4. Copper nanoparticles synthesized in polymers by ion implantation

    DEFF Research Database (Denmark)

    Popok, Vladimir; Nuzhdin, Vladimir; Valeev, Valerij

    2015-01-01

    as optical transmission spectroscopy. It is found that copper nanoparticles nucleation and growth are strongly fluence dependent as well as they are affected by the polymer properties, in particular, by radiation stability yielding different nanostructures for the implanted PI and PMMA. Shallow synthesized......Polymethylmethacrylate (PMMA) and polyimide (PI) samples are implanted by 40 keV Cu+ ions with high fluences in order to synthesize copper nanoparticles in shallow polymer layers. The produced metal/polymer nanocomposites are studied using atomic force and scanning electron microscopies as well...... nanoparticles are observed to partly tower above the sample surface due to a side effect of high-fluence irradiation leading to considerable sputtering of polymers. Implantation and particle formation significantly change optical properties of both polymers reducing transmittance in the UV-visible range due...

  5. Electrostatically anchored branched brush layers.

    Science.gov (United States)

    Liu, Xiaoyan; Dedinaite, Andra; Rutland, Mark; Thormann, Esben; Visnevskij, Ceslav; Makuska, Ricardas; Claesson, Per M

    2012-11-06

    A novel type of block copolymer has been synthesized. It consists of a linear cationic block and an uncharged bottle-brush block. The nonionic bottle-brush block contains 45 units long poly(ethylene oxide) side chains. This polymer was synthesized with the intention of creating branched brush layers firmly physisorbed to negatively charged surfaces via the cationic block, mimicking the architecture (but not the chemistry) of bottle-brush molecules suggested to be present on the cartilage surface, and contributing to the efficient lubrication of synovial joints. The adsorption properties of the diblock copolymer as well as of the two blocks separately were studied on silica surfaces using quartz crystal microbalance with dissipation monitoring (QCM-D) and optical reflectometry. The adsorption kinetics data highlight that the diblock copolymers initially adsorb preferentially parallel to the surface with both the cationic block and the uncharged bottle-brush block in contact with the surface. However, as the adsorption proceeds, a structural change occurs within the layer, and the PEO bottle-brush block extends toward solution, forming a surface-anchored branched brush layer. As the adsorption plateau is reached, the diblock copolymer layer is 46-48 nm thick, and the water content in the layer is above 90 wt %. The combination of strong electrostatic anchoring and highly hydrated branched brush structures provide strong steric repulsion, low friction forces, and high load bearing capacity. The strong electrostatic anchoring also provides high stability of preadsorbed layers under different ionic strength conditions.

  6. About graphene ribbons development in laser synthesized nanocarbon

    Science.gov (United States)

    Gavrila Florescu, L.; Vasile, E.; Sandu, I.; Soare, I.; Fleaca, C.; Ianchis, R.; Luculescu, C.; Dutu, E.; Birjega, R.; Morjan, I.; Voicu, I.

    2011-04-01

    The work presents preliminary studies with the goal to extend the share of long graphene ribbons in laser-synthesized carbon black. Investigations revealed the existence, as a major constituent, of graphene ribbons composed of up to 10-15 graphene layers, spaced at ˜0.35-0.37 nm and of tens of nanometres in length. The samples used to study the development of this specific structure were obtained from sensitized acetylene-based mixtures and the experiments were performed following the variation of both the experimental parameters and gas composition.

  7. About graphene ribbons development in laser synthesized nanocarbon

    Energy Technology Data Exchange (ETDEWEB)

    Gavrila Florescu, L. [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, Bucharest (Romania); Vasile, E. [METAV, 16-18 Zapada Mieilor St., 71529 Bucharest (Romania); Sandu, I.; Soare, I.; Fleaca, C. [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, Bucharest (Romania); Ianchis, R. [Institute of Chemical Research, 202 Splaiul Independentei, CP 15-159, 76250 Bucharest (Romania); Luculescu, C.; Dutu, E.; Birjega, R.; Morjan, I. [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, Bucharest (Romania); Voicu, I., E-mail: ionvoicu2001@yahoo.com [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, Bucharest (Romania)

    2011-04-01

    The work presents preliminary studies with the goal to extend the share of long graphene ribbons in laser-synthesized carbon black. Investigations revealed the existence, as a major constituent, of graphene ribbons composed of up to 10-15 graphene layers, spaced at {approx}0.35-0.37 nm and of tens of nanometres in length. The samples used to study the development of this specific structure were obtained from sensitized acetylene-based mixtures and the experiments were performed following the variation of both the experimental parameters and gas composition.

  8. Construction of different dimensional inorganic-organic hybrid materials based on polyoxometalates and metal-organic units via changing metal ions: from non-covalent interactions to covalent connections.

    Science.gov (United States)

    Lan, Ya-Qian; Li, Shun-Li; Shao, Kui-Zhan; Wang, Xin-Long; Su, Zhong-Min

    2008-08-07

    Five POM-based hybrid materials have been designed and synthesized based on different metal ions under hydrothermal conditions, namely, [Zn(Hfcz)(H(2)O)(3)](H(3)fcz)(SiMo(12)O(40)).3H(2)O (1), [Cd(2)(Hfcz)(6)(H(2)O)(2)](SiMo(12)O(40)).H(2)O (2), [Co(2)(Hfcz)(2)(SiW(12)O(40))](H(3)fcz)(2)(SiW(12)O(40)).10H(2)O (3), [Ni(2)(Hfcz)(4)(H(2)O)(2)](SiW(12)O(40)).5H(2)O (4) and [Ag(4)(Hfcz)(2)(SiMo(12)O(40))] (5), where Hfcz is fluconazole [2-(2,4-difluorophenyl)-1,3-di(1H-1,2,4-triazol-1-yl)propan-2-ol]. Their crystal structures have been determined by X-ray diffraction, elemental analyses, IR spectra, and thermogravimetric analyses (TGA). There are 1D mono and double chain-like metal-organic units in compounds 1 and 2, respectively. Polyoxometalates and metal-organic units co-crystallize through hydrogen bonds. In compound 3, metal-organic sheets are pillared by one kind of polyanion through covalent connections to generate a sandwich double-sheet. The other kind of polyanion acts as a counter-ion and lies in two adjacent sandwich double-sheets through non-covalent interactions. Polyanions covalently link metal-organic sheets to extend to an unusual 3D 5-connected framework with the (4(4).6(6)) topology in 4. In compound 5, polyanions link metal-organic chains to form a sheet through covalent connections. It is interesting that compound 5 shows an intricate (4,5,10)-connected framework with (4(4).6(2))(4)(4(8).6(2))(2)(4(14).6(19).8(12)) topology based on two kinds of Ag cations as four-connected and five-connected nodes, and polyanions as ten-connected nodes, when AgO interactions are considered. It represents the highest connected network topology presently known for polyoxometalate systems. The structural differences among 1-5 indicate the importance of different metal-organic units, coordination modes of polyanions for framework formation, and the interactions between polyanions and metal-organic units. In addition, the luminescent properties of compounds 1, 2 and 5

  9. Titanium dioxide thin films by atomic layer deposition: a review

    Science.gov (United States)

    Niemelä, Janne-Petteri; Marin, Giovanni; Karppinen, Maarit

    2017-09-01

    Within its rich phase diagram titanium dioxide is a truly multifunctional material with a property palette that has been shown to span from dielectric to transparent-conducting characteristics, in addition to the well-known catalytic properties. At the same time down-scaling of microelectronic devices has led to an explosive growth in research on atomic layer deposition (ALD) of a wide variety of frontier thin-film materials, among which TiO2 is one of the most popular ones. In this topical review we summarize the advances in research of ALD of titanium dioxide starting from the chemistries of the over 50 different deposition routes developed for TiO2 and the resultant structural characteristics of the films. We then continue with the doped ALD-TiO2 thin films from the perspective of dielectric, transparent-conductor and photocatalytic applications. Moreover, in order to cover the latest trends in the research field, both the variously constructed TiO2 nanostructures enabled by ALD and the Ti-based hybrid inorganic-organic films grown by the emerging ALD/MLD (combined atomic/molecular layer deposition) technique are discussed.

  10. [Surface layers of methanotrophic bacteria].

    Science.gov (United States)

    Khmelenina, V N; Suzina, N E; Trotsenko, Iu A

    2013-01-01

    Structural and functional characteristics of the regular glycoprotein layers in prokaryotes are analyzed with a special emphasis on aerobic methanotrophic bacteria. S-layers are present at the surfaces of Methylococcus, Methylothermus, and Methylomicrobium cells. Different Methylomicrobium species either synthesize S-layers with planar (p2, p4) symmetry or form cup-shaped or conicalstructures with hexagonal (p6) symmetry. A unique, copper-binding polypeptide 'CorA'/MopE (27/45 kDa), which is coexpressed with the diheme periplasmic cytochrome c peroxidase 'CorB'/Mca (80 kDa) was found in Methylomicrobium album BG8, Methylomicrobium alcaliphilum 20Z, and Methylococcus capsulatus Bath. This tandem of the surface proteins is functionally analogous to a new siderophore, methanobactin. Importantly, no 'CorA'/MopE homologue was found in methanotrophs not forming S-layers. The role of surface proteins in copper metabolism and initial methane oxidation is discussed.

  11. Syntheses of copper complexes of nicotinohydroxamic and ...

    African Journals Online (AJOL)

    Syntheses of copper complexes of nicotinohydroxamic and isonicotinohydroxamic acids. A.O Aliyu, A.P Egwaikhide, C.E Gimba. Abstract. Nicotinohydroxamic acid (NHA) and isonicotinohydroxamic acid (INHA) were synthesized, characterized by electronic and spectral studies,magnetic measurements and their pKa ...

  12. Composites comprising biologically-synthesized nanomaterials

    Science.gov (United States)

    Curran, Seamus; Dias, Sampath; Blau, Werner; Wang, Jun; Oremland, Ronald S; Baesman, Shaun

    2013-04-30

    The present disclosure describes composite materials containing a polymer material and a nanoscale material dispersed in the polymer material. The nanoscale materials may be biologically synthesized, such as tellurium nanorods synthesized by Bacillus selenitireducens. Composite materials of the present disclosure may have optical limiting properties and find use in optical limiting devices.

  13. A Synthesized (Biosocial) Theory of Rape.

    Science.gov (United States)

    Ellis, Lee

    1991-01-01

    Integrates features of contemporary theories of rape (feminist theory, social learning theory, evolutionary theory) with information on neurohormonal variables to formulate synthesized theory of rape. Synthesized theory of rape, consisting of four propositions, proposes that people are not all equally prone toward rape and that men are much more…

  14. Syntheses of Nanostructure Bundles Based on Semiconducting Metal Silicides

    Science.gov (United States)

    Li, Wen; Ishikawa, Daisuke; Tatsuoka, Hirokazu

    2013-08-01

    A variety of nanostructure bundles and arrays based on semiconducting metal silicides have been synthesized using abundant and non-toxic starting materials. Three types of fabrication techniques of the nanostructure bundles or arrays, including direct growth, template synthesis using natural nanostructured materials and template synthesis using artificially fabricated nanostructured materials are demonstrated. CrSi2 nanowire bundles were directly grown by the exposure of Si substrates to CrCl2 vapor at atmospheric pressure. A hexagonal MoSi2 nanosheet, Mg2Si/MgO composite nanowire and Mg2Si nanowire bundles and MnSi1.7 nanowire array were synthesized using a MoS2 layered material, a SiOx nanofiber bundle, a Si nanowire array, and a Si nanowire array as the templates, respectively. Additionally, the fabrication phenomenon and structural properties of the nanostructured semiconducting metal silicides were investigated. These reactions provided the low-cost and controllable synthetic techniques to synthesize large scale and one-dimensional semiconducting metal silicides for thermoelectric applications.

  15. Layered materials

    Science.gov (United States)

    Johnson, David; Clarke, Simon; Wiley, John; Koumoto, Kunihito

    2014-06-01

    Layered compounds, materials with a large anisotropy to their bonding, electrical and/or magnetic properties, have been important in the development of solid state chemistry, physics and engineering applications. Layered materials were the initial test bed where chemists developed intercalation chemistry that evolved into the field of topochemical reactions where researchers are able to perform sequential steps to arrive at kinetically stable products that cannot be directly prepared by other approaches. Physicists have used layered compounds to discover and understand novel phenomena made more apparent through reduced dimensionality. The discovery of charge and spin density waves and more recently the remarkable discovery in condensed matter physics of the two-dimensional topological insulating state were discovered in two-dimensional materials. The understanding developed in two-dimensional materials enabled subsequent extension of these and other phenomena into three-dimensional materials. Layered compounds have also been used in many technologies as engineers and scientists used their unique properties to solve challenging technical problems (low temperature ion conduction for batteries, easy shear planes for lubrication in vacuum, edge decorated catalyst sites for catalytic removal of sulfur from oil, etc). The articles that are published in this issue provide an excellent overview of the spectrum of activities that are being pursued, as well as an introduction to some of the most established achievements in the field. Clusters of papers discussing thermoelectric properties, electronic structure and transport properties, growth of single two-dimensional layers, intercalation and more extensive topochemical reactions and the interleaving of two structures to form new materials highlight the breadth of current research in this area. These papers will hopefully serve as a useful guideline for the interested reader to different important aspects in this field and

  16. Mesoporous Vanadium Nitride Synthesized by Chemical Routes

    National Research Council Canada - National Science Library

    Mishra, Pragnya P; Theerthagiri, J; Panda, Rabi N

    2014-01-01

    Nanocrystalline vanadium nitride (VN) materials are synthesized by two different routes, namely, the urea route and the ammonia route, using various V2O5 precursors obtained by citric acid–based sol–gel method...

  17. Synthesizing a color algorithm from examples.

    Science.gov (United States)

    Hurlbert, A C; Poggio, T A

    1988-01-29

    A lightness algorithm that separates surface reflectance from illumination in a Mondrian world is synthesized automatically from a set of examples, which consist of pairs of input (intensity signal) and desired output (surface reflectance) images. The algorithm, which resembles a new lightness algorithm recently proposed by Land, is approximately equivalent to filtering the image through a center-surround receptive field in individual chromatic channels. The synthesizing technique, optimal linear estimation, requires only one assumption, that the operator that transforms input into output is linear. This assumption is true for a certain class of early vision algorithms that may therefore be synthesized in a similar way from examples. Other methods of synthesizing algorithms from examples, or "learning," such as back-propagation, do not yield a significantly better lightness algorithm.

  18. Syntheses, molecular and crystalline architectures, and ...

    Indian Academy of Sciences (India)

    Syntheses, molecular and crystalline architectures, and luminescence behaviour of terephthalate bridged heptacoordinated dinuclear lead(II) complexes containing a pentadentate N-donor Schiff base. SUBHASIS ROYa, SOMNATH CHOUBEYa, SUMITAVA KHANa, KISHALAY BHARa,. PARTHA MITRAb and BARINDRA ...

  19. A universal isocyanide for diverse heterocycle syntheses

    NARCIS (Netherlands)

    Patil, Pravin; Dömling, Alexander; Khoury, Kareem; Herdtweck, Eberhardt

    2014-01-01

    Novel scaffolds are of uttermost importance for the discovery of functional material. Three different heterocyclic scaffolds easily accessible from isocyanoacetaldehyde dimethylacetal 1 by multicomponent reaction (MCR) are described. They can be efficiently synthesized by a Ugi tetrazole

  20. Raman assisted lightwave synthesized frequency sweeper

    DEFF Research Database (Denmark)

    Pedersen, Anders Tegtmeier; Rottwitt, Karsten

    2010-01-01

    We present a Lightwave Synthesized Frequency Sweeper comprising a Raman amplifier for loss compensation. The generated pulse train contains 123 pulses and has a flat signal level as well as a low noise level.......We present a Lightwave Synthesized Frequency Sweeper comprising a Raman amplifier for loss compensation. The generated pulse train contains 123 pulses and has a flat signal level as well as a low noise level....

  1. Synthesize and characterization of graphene nanosheets with high surface area and nano-porous structure

    Energy Technology Data Exchange (ETDEWEB)

    Jabari Seresht, Razieh [Nanotechnology Research Institute, School of Chemical Engineering, Babol University of Technology (Iran, Islamic Republic of); Jahanshahi, Mohsen, E-mail: mjahan@nit.ac.ir [Nanotechnology Research Institute, School of Chemical Engineering, Babol University of Technology (Iran, Islamic Republic of); Rashidi, Alimorad [Nanotechnology Research Center, Research Institute of Petroleum Industry, Tehran (Iran, Islamic Republic of); Ghoreyshi, Ali Asghar [Nanotechnology Research Institute, School of Chemical Engineering, Babol University of Technology (Iran, Islamic Republic of)

    2013-07-01

    A few-layer graphene was obtained by the expansion and exfoliation of water-intercalated graphene oxide via heat treatment in nitrogen environment in the temperature range of 200–1000 °C. Graphene which was synthesized at 800 °C (GT800) had a higher quality than other temperatures. This graphene has a high specific surface area (560.6 m{sup 2} g{sup −1}) and nano-porous structure. However, as for the purpose of comparison, graphene was synthesized with a colloidal suspension of exfoliated graphene oxide sheets in water with hydrazine hydrate in various reaction times (12, 24 and 36 h). This method has obtained a six-layer graphene and graphene that was synthesized during 24 h reaction with hydrazine hydrate (GC24) had a higher quality in comparison with the other products. The GC24 had 195.97 m{sup 2} g{sup −1} specific surface area and nano-porous structure. The as-synthesized graphene were then characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM) as well as BET measurements. The results demonstrated that this low-cost method for few-layer grapheme, e.g. three-layers, fabrication is reliable and promising.

  2. Syntheses and structural properties of rare earth carbodiimides.

    Science.gov (United States)

    Neukirch, Michael; Tragl, Sonja; Meyer, H-Jürgen

    2006-10-02

    Crystalline samples of rare earth carbodiimides were synthesized by solid-state metathesis reactions of rare earth trichlorides with lithium cyanamide in sealed silica ampules. Two distinct structures were determined by single-crystal X-ray diffraction. The structure determined for Sm2(CN2)3 [C2/m, Z = 2, a = 14.534(2) A, b = 3.8880(8) A, c = 5.2691(9) A, beta = 95.96(2) degrees , R1 = 0.0267, and wR2 = 0.0667] was assigned for RE2(CN2)3 compounds with RE = Y, Pr, Nd, Sm, Gd, Tb, Dy, Ho, and Er, and the structure determined for Lu2(CN2)3 [R32, Z = 3, a = 6.2732(8) A, c = 14.681(2) A, R1 = 0.0208, and wR2 = 0.0526] was assigned for the smallest rare earth ions with RE = Tm, Yb, and Lu by powder X-ray diffraction. Both types of crystal structures are characterized by layers of [NCN](2-) ions whose arrangements can be derived from the motif of a closest packed layer of sticks. These layers alternate with layers of rare earth ions in a one-by-one sequence. Different tilting arrangements of the N-C-N-axes relative to the stacking directions (c) and different arrangements of RE3+ ions within metal atom layers account for the two distinct structures in which Sm3+ and Lu3+ ions adopt the coordination numbers 7 and 6, respectively.

  3. Organic and inorganic–organic thin film structures by molecular layer deposition: A review

    Directory of Open Access Journals (Sweden)

    Pia Sundberg

    2014-07-01

    Full Text Available The possibility to deposit purely organic and hybrid inorganic–organic materials in a way parallel to the state-of-the-art gas-phase deposition method of inorganic thin films, i.e., atomic layer deposition (ALD, is currently experiencing a strongly growing interest. Like ALD in case of the inorganics, the emerging molecular layer deposition (MLD technique for organic constituents can be employed to fabricate high-quality thin films and coatings with thickness and composition control on the molecular scale, even on complex three-dimensional structures. Moreover, by combining the two techniques, ALD and MLD, fundamentally new types of inorganic–organic hybrid materials can be produced. In this review article, we first describe the basic concepts regarding the MLD and ALD/MLD processes, followed by a comprehensive review of the various precursors and precursor pairs so far employed in these processes. Finally, we discuss the first proof-of-concept experiments in which the newly developed MLD and ALD/MLD processes are exploited to fabricate novel multilayer and nanostructure architectures by combining different inorganic, organic and hybrid material layers into on-demand designed mixtures, superlattices and nanolaminates, and employing new innovative nanotemplates or post-deposition treatments to, e.g., selectively decompose parts of the structure. Such layer-engineered and/or nanostructured hybrid materials with exciting combinations of functional properties hold great promise for high-end technological applications.

  4. Recent progress of atomic layer deposition on polymeric materials.

    Science.gov (United States)

    Guo, Hong Chen; Ye, Enyi; Li, Zibiao; Han, Ming-Yong; Loh, Xian Jun

    2017-01-01

    As a very promising surface coating technology, atomic layer deposition (ALD) can be used to modify the surfaces of polymeric materials for improving their functions and expanding their application areas. Polymeric materials vary in surface functional groups (number and type), surface morphology and internal structure, and thus ALD deposition conditions that typically work on a normal solid surface, usually do not work on a polymeric material surface. To date, a large variety of research has been carried out to investigate ALD deposition on various polymeric materials. This paper aims to provide an in-depth review of ALD deposition on polymeric materials and its applications. Through this review, we will provide a better understanding of surface chemistry and reaction mechanism for controlled surface modification of polymeric materials by ALD. The integrated knowledge can aid in devising an improved way in the reaction between reactant precursors and polymer functional groups/polymer backbones, which will in turn open new opportunities in processing ALD materials for better inorganic/organic film integration and potential applications. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. A simple route to synthesize size-controlled Ag{sub 2}S core-shell nanocrystals, and their self-assembly

    Energy Technology Data Exchange (ETDEWEB)

    Lou Wenjing; Wang Xiaobo; Chen Miao; Liu Weimin; Hao Jincheng [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China)], E-mail: jhao@sdu.edu.cn

    2008-06-04

    Silver sulfide (Ag{sub 2}S) nanocrystals were successfully synthesized by the thermal treatment of the single source precursors, silver dialkyldithiophosphates (Ag[S{sub 2}P(OC{sub n}H{sub 2n+1}){sub 2}]), under mild reaction conditions. The size of Ag{sub 2}S nanocrystals with regular shape can be controlled in the range of tens of nanometers by adjusting critical parameters, such as the carbon number of the substitute alkyl, the solvent and the reaction temperature. Electron diffraction and x-ray powder diffraction confirmed the orthorhombic phase of the Ag{sub 2}S nanocrystals. The as-prepared Ag{sub 2}S nanocrystals have an inorganic-organic core-shell structure, in which Ag{sub 2}S nanocrystals are the inorganic core and the organic modifiers, consisting of oleylamine and dialkyldithiophosphate, are the shell. The organic modifiers were anchored to the surface of Ag{sub 2}S nanocores by their active groups of -NH{sub 2} and -SPS- , respectively, and their direct-alkyl chains spread to the outside. So, these as-prepared Ag{sub 2}S nanocrystals can self-assemble to form orderly two-dimensional arrays easily, and they disperse in some non-polar solvents stably.

  6. Electrodeposition of inorganic/organic hybrid thin films

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, Tsukasa [Center of Innovative Photovoltaic Systems, Gifu University (Japan); Environmental and Renewable Energy Systems Division, Graduate School of Engineering, Gifu University (Japan); Zhang, Jingbo; Komatsu, Daisuke; Sawatani, Seiichi; Minoura, Hideki [Environmental and Renewable Energy Systems Division, Graduate School of Engineering, Gifu University (Japan); Pauporte, Thierry; Lincot, Daniel [Laboratoire d' Electrochimie et Chimie Analytique, Ecole Nationale Superieure de Chimie de Paris 11 rue P. et M. Curie, 75231 Paris cedex 05 (France); Oekermann, Torsten [Institut fuer Physikalische Chemie und Elektrochemie, Universitaet Hannover (Germany); Schlettwein, Derck [Institut fuer Angewandte Physik, Justus-Liebig-Universitaet Giessen (Germany); Tada, Hirokazu [Institute for Molecular Science, Higashiyama (Japan); Woehrle, Dieter [Institut fuer Organische und Makromolekulare Chemie, Universitaet Bremen (Germany); Funabiki, Kazumasa; Matsui, Masaki [Department of Materials Science and Technology, Faculty of Engineering, Gifu University (Japan); Miura, Hidetoshi [Chemicrea Inc., Tokyo (Japan); Yanagi, Hisao [Graduate School of Materials Science, Nara Institute of Science and Technology Takayama-cho 8916-5, Ikoma (Japan)

    2009-01-09

    Electrodeposition of inorganic compound thin films in the presence of certain organic molecules results in self-assembly of various hybrid thin films with new properties. Examples of new discoveries by the authors are reviewed, taking cathodic formation of a ZnO/dye hybrid as the leading example. Hybridization of eosinY leads to the formation of highly oriented porous crystalline ZnO as the consequence of dye loading. The hybrid formation is a highly complicated process involving complex chemistry of many molecular and ionic constituents. However, electrochemical analyses of the relevant phenomena indicate the possibility of reaching a comprehensive understanding of the mechanism, giving us the chance to further develop them into industrial technologies. The porous crystals are ideal for photoelectrodes in dye-sensitized solar cells. As the process also permits the use of non-heat-resistant substrates, the technology can be applied for the development of colorful and light-weight plastic solar cells. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  7. Synchrotron radiation studies of inorganic-organic semiconductor interfaces

    CERN Document Server

    Evans, D A; Vearey-Roberts, A R; Bushell, A; Cabailh, G; O'Brien, S; Wells, J W; McGovern, I T; Dhanak, V R; Kampen, T U; Zahn, D R T; Batchelor, D

    2003-01-01

    Organic semiconductors (polymers and small molecules) are widely used in electronic and optoelectronic technologies. Many devices are based on multilayer structures where interfaces play a central role in device performance and where inorganic semiconductor models are inadequate. Synchrotron radiation techniques such as photoelectron spectroscopy (PES), near-edge X-ray absorption fine structure (NEXAFS) and X-ray standing wave spectroscopy (XSW) provide a powerful means of probing the structural, electronic and chemical properties of these interfaces. The surface-specificity of these techniques allows key properties to be monitored as the heterostructure is fabricated. This methodology has been directed at the growth of hybrid organic-inorganic semiconductor interfaces involving copper phthalocyanine as the model organic material and InSb and GaAs as the model inorganic semiconductor substrates. Core level PES has revealed that these interfaces are abrupt and chemically inert due to the weak bonding between t...

  8. Inorganic-Organic Molecular Bonding in Porous Matrices

    National Research Council Canada - National Science Library

    Hench, L

    1997-01-01

    .... Large surface areas inherent in sol-gel derived silica increase the interaction area for surface mediated reactions while large pore volumes enhance the introduction of organic or inorganic modifiers...

  9. Responsive hybrid inorganic-organic system derived from lanthanide luminescence

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Zhan [School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Zheng, Yuhui, E-mail: yhzheng78@scnu.edu.cn [School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Jiang, Lasheng; Yang, Jinglian [School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Wang, Qianming, E-mail: qmwang@scnu.edu.cn [Key Laboratory of Theoretical Chemistry of Environment, Ministry of Education, School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Guangzhou Key Laboratory of Materials for Energy Conversion and Storage, Guangzhou 510006 (China)

    2016-05-15

    Highlights: • A novel covalent hybrid material was used to detect hemoglobin. • All the recognition experiments were performed in buffer solution. • Porous nano-structures was extensively studied for the recognition. - Abstract: Terbium ions were incorporated into new organic-inorganic matrices to achieve intense green emissions. Hemoglobin (HB) interactions lead to dramatic changes in the luminescence emission intensities. Infrared spectra, morphological studies and photoluminescence give information for the speciation and process of hemoglobin additions. The porous material has a large specific surface area of 351 cm{sup 2}/g and the detection limit for HB (0.7 μM) was much lower than its physical doped material (8 μM). This promising hybrid material will lead to the design of versatile optical probes that are efficiently responding to the external targets.

  10. Stretchable Helical Architecture Inorganic-Organic Hetero Thermoelectric Generator

    KAUST Repository

    Rojas, Jhonathan Prieto

    2016-10-26

    To achieve higher power output from a thermoelectric generator (TEG), one needs to maintain a larger temperature difference between hot and cold end. In that regard, a stretchable TEG can be interesting to adaptively control the temperature difference. Here we show, the development of simple yet versatile and highly stretchable thermoelectric generators (TEGs), by combining well-known inorganic thermoelectric materials Bismuth Telluride and Antimony Telluride (Bi2Te3 and Sb2Te3) with organic substrates (Off-Stoichiometry Thiol-Enes polymer platform – OSTE, polyimide or paper) and novel helical architecture (double-arm spirals) to achieve over 100% stretchability. First, an OSTE-based TEG design demonstrates higher open circuit voltage generation at 100% strain than at rest, although it exhibits high internal resistance and a relatively complex fabrication process. The second, simpler TEG design, achieves a significant resistance reduction and two different structural substrates (PI and paper) are compared. The paper-based TEG generates 17 nW (ΔT = 75 °C) at 60% strain, which represents more than twice the power generation while at rest (zero strain). On the other hand, polyimide produces more conductive TE films and higher power (~35 nW at ΔT = 75 °C) but due to its higher thermal conductivity, power does not increase at stretch. In conclusion, highly stretchable TEGs can lead to higher temperature gradients (thus higher power generation), given that thermal conductivity of the structural material is low enough. Furthermore, either horizontal or vertical displacement can be achieved with double-arm helical architecture, hence allowing to extend the device to any nearby and mobile heat sink for continuous, effectively higher power generation.

  11. Inorganic-organic hybrid polymers for food packaging

    CSIR Research Space (South Africa)

    Kesavan Pillai, Sreejarani

    2015-09-01

    Full Text Available The use of polymer materials in food packaging is one of the fastest growing global trends. There has been serious interest and effort over the last few years in the advancement of novel food packaging concepts which can play a proactive role...

  12. Characterizing the inorganic/organic interface in cancer bone metastasis

    Science.gov (United States)

    Wu, Fei

    Bone metastasis frequently occurs in patients with advanced breast cancer and remains a major source of mortality. At the molecular level, bone is a nanocomposite composed of inorganic bone mineral deposited within an organic extracellular matrix (ECM). Although the exact mechanisms of bone metastasis remain unclear, the nanoscale materials properties of bone mineral have been implicated in this process. Bone apatite is closely related to synthetic hydroxyapatite (HAP, Ca10(PO4)6(OH)2) in terms of structural and mechanical properties. Additionally, although the primary protein content of bone is collagen I, the glycoprotein fibronectin (Fn) is essential in maintaining the overall integrity of the bone matrix. Importantly, in vivo, neither breast cancer cells nor normal bone cells interact directly with the bone mineral but rather with the protein film adsorbed onto the mineral surface. Therefore, we hypothesized that breast cancer cell functions were regulated by differential fibronectin adsorption onto hydroxyapatite, which led to pathological remodeling of the bone matrix and sustained bone metastasis. Three model systems containing HAP and Fn were developed for this thesis. In model system I, a library of synthetic HAP nanoparticles were utilized to investigate the effect of mineral size, shape, and crystallinity on Fn conformation, using Forster resonance energy transfer (FRET) spectroscopy. In model system II, Fn-functionalized large geologic HAP crystals were used instead of HAP nanoparticles to avoid cellular uptake when investigating subsequent cell functions. Overall our FRET analysis (models I and II) revealed that Fn conformation depended on size, surface chemistry, and roughness of underlying HAP. When breast cancer cells were seeded on the Fn-coated HAP crystal facets (model II), our data indicated high secretion levels of proangiogenic and proinflammatory factors associated with the presence of unfolded Fn conformations, likely caused by differential engagement of cell receptors integrins with the underlying Fn. Finally, in model system III, Fn fibrillar structures (mimicking the bone matrix) were fabricated and characterized in presence of HAP nanoparticles, suggesting that the presence of microcalcifications found in tumorous/inflammed tissues affects both the structural and mechanical properties of the surrounding ECM. Collectively, our study of cellular behavior regulated by mineral/ECM interactions provides insights into the pathogenesis of breast cancer bone metastasis as well as other HAP-related inflammation.

  13. Copper inorganic-organic hybrid coordination compound as a novel ...

    Indian Academy of Sciences (India)

    Eco Chemie B.V.) potentio- stat/galvanostat by NOVA 1.8 software. A conventional three electrode cell was used with an Ag|AgCl elec- trode (KCl 3M) as the reference electrode, a Pt wire as counter electrode and a modified glassy carbon elec-.

  14. Two new inorganic-organic hybrid materials based on inorganic ...

    Indian Academy of Sciences (India)

    Author Affiliations. Fatma Hmida1 Meriem Ayed1 Brahim Ayed1 Amor Haddad1. Laboratoire de Matériaux et Cristallochimie, Faculté des Sciences de Monastir, Avenue d'environnement, 5019 Monastir, Tunisie ...

  15. Structural and magnetic properties of the layered

    Indian Academy of Sciences (India)

    The brownmillerite-type layered compound Ca2.375La0.125Sr0.5GaMn2O8 has been synthesized. The crystal and magnetic structures have been refined by the Rietveld analysis of the neutron powder diffraction patterns at 300 and 20 K. This compound crystallizes in the orthorhombic symmetry under the space group ...

  16. Biosynthesis of silver nanoparticles synthesized by Aspergillus ...

    Indian Academy of Sciences (India)

    In the present study, biosynthesis of silver nanoparticles and its antioxidant, antimicrobial and cytotoxic activities were investigated. Silver nanoparticles were extracellularly synthesized using Aspergillus flavus and the formation of nanoparticles was observed after 72 h of incubation. The results recorded from colour ...

  17. TWO NEW 1D COORDINATION POLYMERS: SYNTHESES ...

    African Journals Online (AJOL)

    Preferred Customer

    for Nationalities, College of Chemistry and Chemical Engineering, Nanning, Guangxi 530006,. China ... The O–H···O and C–H···Cl hydrogen-bonding interactions play a significant role in promoting the diversity ... syntheses, structural characterization, and spectral analyses of two new coordination polymers based on three ...

  18. Biological activities of synthesized silver nanoparticles from ...

    Indian Academy of Sciences (India)

    The C. halicacabum leaf extract synthesized AgNPs efficiency were tested against different bacterial pathogens MTCC-426 Proteus vulgaris, MTCC-2453 Pseudomonas aeruginosa, MTCC-96 Staphylococcus aureus, MTCC-441 Bacillus subtilis andMTCC-735 Salmonella paratyphi, and fungal pathogens Alternaria solani ...

  19. Syntheses, molecular and crystalline architectures, and ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 125; Issue 4. Syntheses, molecular and ... Mitra2 Barindra Kumar Ghosh1. Department of Chemistry, The University of Burdwan, Burdwan 713 104, India; Department of Inorganic Chemistry, Indian Association for the Cultivation of Science, Kolkata 700 032, India ...

  20. Cytotoxicity of Nanoliposomal Cisplatin Coated with Synthesized ...

    African Journals Online (AJOL)

    Purpose: To evaluate the cytotoxicity of pegylated nanoliposomal cisplatin on human ovarian cancer cell line A2780CP. Methods: Synthesized methoxypolyethylene glycol (mPEG) propionaldehyde was characterized by 1Hnuclear magnetic resonance (1H-NMR) and Fourier transform infrared spectroscopy (FTIR) and used ...

  1. Ferromagnetic Behavior in Zinc Ferrite Nanoparticles Synthesized ...

    African Journals Online (AJOL)

    Zinc ferrite have been produced and used by humans since long time, however understanding of ZnFe2O4 as a nano structured materials is very useful in order to be used for technological applications. ZnFe2O4 structural, magnetic and electrical properties are different when synthesized using different techniques.

  2. Solvothermal syntheses, crystal structures, optical and thermal ...

    Indian Academy of Sciences (India)

    Keywords. Selenidogermanates; nickel; solvothermal syntheses; crystal structures; optical properties ... The different coordination environments of Ni²⁺ ions indicate the influence of the denticity of ethylene polyamines on the formation of selenidogermanates in the presence of transition metal ions. Thecompounds 1–3 ...

  3. Spectroscopy and laser characterization of synthesized ...

    Indian Academy of Sciences (India)

    2014-02-12

    Feb 12, 2014 ... spectrophotometric titration. Laser performances of the synthesized and commercial CB[7] sample as an additive were evaluated using Nd-YAG (532 nm) pumped Rhodamine B aqueous dye lasers and comparable results were obtained. Keywords. Macrocyclic host; cucurbit[7]uril; host–guest complex; ...

  4. Double-layered Aurivillius-type ferroelectrics with magnetic moments

    NARCIS (Netherlands)

    Missyul, A. B.; Zvereva, I. A.; Palstra, T. T. M.; Kurbakov, A. I.

    We have synthesized the double-layer Aurivillius phase Bi(2)LnNbTiO(9) where Ln = Nd-Gd, Bi. All compounds adopt the orthorhombic polar space group A2(I)am. The magnetic Ln-ion occupies the cuboctahedral position in the middle of the perovskite double-layer, and thus controls the octahedral tilt of

  5. Three pyridyl modified Cu(II)/Cd(II)-diphosphonates: Syntheses, crystal structures and properties

    Science.gov (United States)

    Ma, Kui-Rong; Cao, Li; Cong, Ming-Hui; Kan, Yu-He; Li, Rong-Qing

    2017-07-01

    Three examples of M(II)-diphosphonates, [Cu3(H3Lsbnd H)4]·2(OH)·2H2O 1, [Cu3(H2L)2(H2O)2] 2, and [Cd(H2Lsbnd H)]·H2O 3 based on 1-hydroxy-2-(3-pyridyl)ethylidene-1,1-diphosphonic acid (HxL/HxLsbnd H: x = 0-5, H5L = (H4C5N)CH2C(OH)(PO3H2)2, H5L-H = (H4C5Nsbnd H)CH2C(OH)(PO3H2)2), have been hydrothermally obtained and characterized by powder X-ray diffraction, elemental analysis, TG-DSC and IR. The single-crystal X-ray diffractions reveal that compounds 1 and 3 are one-dimensional chain structures (linear for 1 and ladderlike for 3) constructed by binuclear units [M2O2]n, simultaneously organic pyridine-ring suspending both sides, and compound 2 shows a two-dimensional inorganic-organic alternate arrangement layer built from 1-D ladderlike inorganic chain with trinuclear units [Cu3(OPO)4]nvia pyridine-ring linker. The results of electrochemical measurements indicate that both 2 and 3 are significant negatively shifted by 0.17 V and 0.13 V (0.33 V for 2 and 0.37 V for 3), respectively, while 1 was red-shifted by 0.87 V (1.37 V), compared with the ligand H5L (0.50 V). Moreover fluorescent measurements reveal that compounds 1-3 display fluorescent emission bands, 383 nm and 425 nm for 1, 382 nm and 425 nm for 2 and 311 nm, 378 nm and 422.5 nm for 3 (λex = 235 nm), caused by intraligand π*-π emission state of the ligand H5L (λex = 233 nm). Magnetic data indicate that compound 1 exhibits weak ferromagnetic interactions within 1-D linear chain, but compound 2 gives an antiferromagnetic behavior within 1-D ladderlike chain. The energy levels of the frontier molecular orbitals of 1∼3 are obtained from DFT calculations (EHOMO1: -15.23 eV, 2: = -9.74 eV, 3: -11.5 eV), and the low HOMO-LUMO gaps of 1 (0.38 eV), 2 (0.20 eV) and 3 (0.38 eV) mean that high chemical reactivity for three compounds.

  6. Photosensitive Layer-by-Layer Assemblies Containing Azobenzene Groups: Synthesis and Biomedical Applications

    OpenAIRE

    Uichi Akiba; Daichi Minaki; Jun-ichi Anzai

    2017-01-01

    This review provides an overview of the syntheses of photosensitive layer-by-layer (LbL) films and microcapsules modified with azobenzene derivatives and their biomedical applications. Photosensitive LbL films and microcapsules can be prepared by alternate deposition of azobenzene-bearing polymers and counter polymers on the surface of flat substrates and microparticles, respectively. Azobenzene residues in the films and microcapsules exhibit trans-to-cis photoisomerization under UV light, wh...

  7. Enzymatic synthesizing of phytosterol oleic esters.

    Science.gov (United States)

    Pan, Xinxin; Chen, Biqiang; Wang, Juan; Zhang, Xinzhi; Zhul, Biyun; Tan, Tianwei

    2012-09-01

    A method of synthesizing the phytosterol esters from oleic acid and sterols was studied, using immobilized lipase Candida sp. 99-125 as catalyst. Molar ratio (oleic acid/phytosterols), temperature, reaction period, organic solvents, catalyst, and silica-gel drier were optimized, and the result showed that 93.4% of the sterols had been esterified under the optimal synthetic condition: the molar ratio of oleic acid/phytosterol is 1:1 in 10 mL iso-octane, immobilized lipase (w, 140% of the sterols), incubated in an orbital shaker (200 rpm) at a temperature of 45 °C for 24 h. The immobilized lipase could be reused for at least 13 times with limited loss of esterification activity. The conversion still maintained up to 86.6%. Hence, this developed process for synthesizing phytosterol esters could be considered as simple and low-energy consumption compared to existing chemical processes.

  8. Gene Assembly from Chip-Synthesized Oligonucleotides

    Science.gov (United States)

    Eroshenko, Nikolai; Kosuri, Sriram; Marblestone, Adam H; Conway, Nicholas; Church, George M.

    2012-01-01

    De novo synthesis of long double-stranded DNA constructs has a myriad of applications in biology and biological engineering. However, its widespread adoption has been hindered by high costs. Cost can be significantly reduced by using oligonucleotides synthesized on high-density DNA chips. However, most methods for using off-chip DNA for gene synthesis have failed to scale due to the high error rates, low yields, and high chemical complexity of the chip-synthesized oligonucleotides. We have recently demonstrated that some commercial DNA chip manufacturers have improved error rates, and that the issues of chemical complexity and low yields can be solved by using barcoded primers to accurately and efficiently amplify subpools of oligonucleotides. This article includes protocols for computationally designing the DNA chip, amplifying the oligonucleotide subpools, and assembling 500-800 basepair (bp) constructs. PMID:25077042

  9. Syntheses and studies of organosilicon compounds

    Energy Technology Data Exchange (ETDEWEB)

    Xie, Ren [Iowa State Univ., Ames, IA (United States)

    1999-02-12

    The syntheses of polycarbosilanes and polysilanes as silicon carbide ceramic precursors have been active research areas in the Barton Research Group. In this thesis, the work is focused on the preparation of polycarbosilanes and polysilanes as stoichiometric silicon carbide precursor polymers. The syntheses of the precursor polymers are discussed and the conversions of these precursors to silicon carbide via pyrolysis are reported. The XRD pattern and elemental analyses of the resulting silicon carbide ceramics are presented. Silicon monoxide is an important intermediate in the production of silicon metal. The existence of silicon monoxide in gap phase has been widely accepted. In the second part of this thesis, the generation of gaseous silicon monoxide in four different reactors and the reactions of gaseous silicon monoxide towards organic compounds are discussed.

  10. Biological activities of synthesized silver nanoparticles from ...

    Indian Academy of Sciences (India)

    ical scavenging activity was measured by the salicylic acid method [16]. The synthesized AgNPs solution at different concentrations (10 to 80 μg ml. −1. ) was dissolved in 1 ml of distilled water. One millilitre of AgNPs mixed with 1 ml of. 9 mM salicylic acid, 1 ml of 9 mM ferrous sulphate and 1ml of 9 mM hydrogen peroxide.

  11. Nanocrystalline diamond synthesized from C60

    Energy Technology Data Exchange (ETDEWEB)

    Dubrovinskaia, N.; Dubrovinsky, L.; Langehorst, F.; Jacobsen, S.; Liebske, C. (Bayreuth)

    2010-11-30

    A bulk sample of nanocrystalline cubic diamond with crystallite sizes of 5-12 nm was synthesized from fullerene C{sub 60} at 20(1) GPa and 2000 C using a multi-anvil apparatus. The new material is at least as hard as single crystal diamond. It was found that nanocrystalline diamond at high temperature and ambient pressure kinetically is more stable with respect to graphitization than usual diamonds.

  12. Cyclopropanation Strategies in Recent Total Syntheses.

    Science.gov (United States)

    Ebner, Christian; Carreira, Erick M

    2017-09-27

    Complex molecular architectures containing cyclopropanes present significant challenges for any synthetic chemist. This review aims to highlight the strategic considerations for introduction of the cyclopropane motif in a collection of recent total syntheses. At first, an overview of the most important and widely used cyclopropanation techniques is presented, followed by a discussion of elegant approaches and clever solutions that have been developed to enable the synthesis of various unique cyclopropane natural products or use of cyclopropanes as versatile strategic intermediates.

  13. Magnesioferrite synthesized from magnesian-magnetites

    Directory of Open Access Journals (Sweden)

    Marcelo Hidemassa Anami

    2014-02-01

    Full Text Available Magnesioferrite is an important mineral due to its use in different scientific fields and by the fact that the soil through the action of weathering, can be a source of nutrients essential for plant development by the fact that in the soil. Its use in pure form or associated with other minerals is only possible through the synthesis in laboratory conditions. This study aimed to synthesize magnesioferrite and hematite from magnesian-magnetite by a co-precipitation procedure. The methodology used is an adaptation of the method of synthesis of pure magnetite, partially replacing the soluble salts of iron with soluble magnesium salts in the proportion of 30.0 mol% of Fe for Mg. The characterization of the synthetic minerals used x-rays diffraction, total chemical analysis and mass specific magnetic susceptibility. The results showed that besides the magnesian-magnetite an unprecedented muskoxita was synthesized, which upon annealing was converted to magnesioferrite and hematite and in the proportion of 93.1% and 6.9% respectively. The isomorphous substitution of Fe for Mg enhanced the thermal stability of the ferrimagnetic mineral synthesized.

  14. Syntheses and studies of acetylenic polymers

    Energy Technology Data Exchange (ETDEWEB)

    Yiwei, Ding [Iowa State Univ., Ames, IA (United States)

    1994-03-03

    Based on new diiodo aryl compounds a series of novel soluble polymers, poly(2,5-dialkoxy-1,4-phenyleneethynylene)s (PPE polymers) were synthesized using palladium-catalysis. The molecular weights (MW) range from 8,000 to 40,000. Properties such as absorption, fluorescence, and conductivity were studied. A PPE polymer with butoxy side chain exhibits a weak electrical conductivity (σ = 10-3 S/cm) after doping with AsF5. Absorption spectra in THF solution at room temperature (RT) show a maximum at 440 nm. However, absorption spectra of PPE polymers in the film state at (RT) show a maximum at 480 nm. PPE polymer-based light emitting diode (LED) devices have been prepared; greenish light from these LED devices can be observed. Poly(ethynylene-p-arylene-ethynylene-silylene)s were synthesized through the same palladium-catalyzed polymerization; MWs are between 6,000 and 82,000. Absorption and fluorescence were studied. Some of these polymers exhibit thermotropic liquid crystalline properties. In addition, nonlinear optical properties were briefly examined. Poly(silylene-ethynylene) homopolymers as well as alternating copolymers were synthesized through a novel palladium-catalyzed polymerization; MWs range from 56 x 103 to 5.3 x 103. Thermal stability of these was also investigated; char yields range from 56 to 83%. One of these polymers exhibits thermotropic liquid crystalline properties.

  15. Shock Syntheses of Novel Nitrides and Biomolecules

    Science.gov (United States)

    Sekine, Toshimori

    2013-06-01

    High-pressure spinel nitride of Si3N4 was discovered more than 10 years ago. Since then there have been many studies on the spinel nitrides and related materials including oxynitrides. We have developed shock synthesis method to investigate their structural, mechanical, chemical, physical, and optical properties. At the same time we tried to synthesize carbon nitrides from the organic substances. And later we extended to shock synthesis of ammonia through the Haber-Bosch reaction under shock in order to apply geochemical subjects related to the origin of life. The simplest amino acid of glycine, as well as animes (up to propylamine) and carboxylic acids (up to pentanoic acid), has been synthesized successfully in aqueous solutions through meteoritic impact reactions. Recently we are trying to make more complex biomolecules for implications of biomolecule formation for the origin of life through meteorite impacts on early Earth's ocean. These results of shock syntheses may imply significant contributions to materials science and Earth and planetary sciences. This research is collaborated with National Institute for Materials Science and Tohoku University.

  16. High quality graphene synthesized by atmospheric pressure CVD on copper foil

    OpenAIRE

    Trinsoutrot, Pierre; Rabot, Caroline; Vergnes, Hugues; Delamoreanu, Alexandru; Zenasni, Aziz; Caussat, Brigitte

    2013-01-01

    International audience; Graphene was synthesized at 1000 °C by Atmospheric Pressure Chemical Vapor Deposition on copper foil from methane diluted in argon and hydrogen. The influence of the main synthesis parameters was studied on 2 × 2 cm2 foils in order to obtain continuous monolayer graphenewithout crystalline defect. The uniformity, crystal quality and number of layers of graphenewere analyzed by Raman spectroscopy and Scanning Electronic Microscopy. First, an increase of the annealing pr...

  17. Zinc nanoplates synthesized by a micro-jet under electron-beam irradiation

    Science.gov (United States)

    Gong, Jiangfeng; Yang, Shaoguang; Huang, Hongbo; Zhao, Xiaoning; Yu, Zhong-Zhen

    2007-06-01

    Zinc nanoplates with interesting shapes have been successfully synthesized by irradiating Zn/ZnS core/shell microballs with electron beams in a transmission electron microscope. The structure characterization reveals that the nanoplates present a wurtzite phase covered with a thin ZnO layer. A systematic study on the microballs has been performed and a formation mechanism for these nanoplates has been proposed. The e-beam radiation technique provides a novel approach for fabrication of novel nanostructured materials.

  18. Zinc nanoplates synthesized by a micro-jet under electron-beam irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Gong Jiangfeng [National Laboratory of Microstructures, Nanjing University, Nanjing 210093 (China); Yang Shaoguang [National Laboratory of Microstructures, Nanjing University, Nanjing 210093 (China); Huang Hongbo [National Laboratory of Microstructures, Nanjing University, Nanjing 210093 (China); Zhao Xiaoning [National Laboratory of Microstructures, Nanjing University, Nanjing 210093 (China); Yu Zhongzhen [Center for Advanced Materials Technology, School of Aerospace, Mechanical and Mechatronic Engineering (J07), University of Sydney, Sydney, NSW 2006 (Australia)

    2007-06-13

    Zinc nanoplates with interesting shapes have been successfully synthesized by irradiating Zn/ZnS core/shell microballs with electron beams in a transmission electron microscope. The structure characterization reveals that the nanoplates present a wurtzite phase covered with a thin ZnO layer. A systematic study on the microballs has been performed and a formation mechanism for these nanoplates has been proposed. The e-beam radiation technique provides a novel approach for fabrication of novel nanostructured materials.

  19. Shock-synthesized hexagonal diamonds in Younger Dryas boundary sediments.

    Science.gov (United States)

    Kennett, Douglas J; Kennett, James P; West, Allen; West, G James; Bunch, Ted E; Culleton, Brendan J; Erlandson, Jon M; Que Hee, Shane S; Johnson, John R; Mercer, Chris; Shen, Feng; Sellers, Marilee; Stafford, Thomas W; Stich, Adrienne; Weaver, James C; Wittke, James H; Wolbach, Wendy S

    2009-08-04

    The long-standing controversy regarding the late Pleistocene megafaunal extinctions in North America has been invigorated by a hypothesis implicating a cosmic impact at the Allerød-Younger Dryas boundary or YDB (approximately 12,900 +/- 100 cal BP or 10,900 +/- 100 (14)C years). Abrupt ecosystem disruption caused by this event may have triggered the megafaunal extinctions, along with reductions in other animal populations, including humans. The hypothesis remains controversial due to absence of shocked minerals, tektites, and impact craters. Here, we report the presence of shock-synthesized hexagonal nanodiamonds (lonsdaleite) in YDB sediments dating to approximately 12,950 +/- 50 cal BP at Arlington Canyon, Santa Rosa Island, California. Lonsdaleite is known on Earth only in meteorites and impact craters, and its presence strongly supports a cosmic impact event, further strengthened by its co-occurrence with other nanometer-sized diamond polymorphs (n-diamonds and cubics). These shock-synthesized diamonds are also associated with proxies indicating major biomass burning (charcoal, carbon spherules, and soot). This biomass burning at the Younger Dryas (YD) onset is regional in extent, based on evidence from adjacent Santa Barbara Basin and coeval with broader continent-wide biomass burning. Biomass burning also coincides with abrupt sediment mass wasting and ecological disruption and the last known occurrence of pygmy mammoths (Mammuthus exilis) on the Channel Islands, correlating with broader animal extinctions throughout North America. The only previously known co-occurrence of nanodiamonds, soot, and extinction is the Cretaceous-Tertiary (K/T) impact layer. These data are consistent with abrupt ecosystem change and megafaunal extinction possibly triggered by a cosmic impact over North America at approximately 12,900 +/- 100 cal BP.

  20. Tailoring graphene layer-to-layer growth

    Science.gov (United States)

    Li, Yongtao; Wu, Bin; Guo, Wei; Wang, Lifeng; Li, Jingbo; Liu, Yunqi

    2017-06-01

    A layered material grown between a substrate and the upper layer involves complex interactions and a confined reaction space, representing an unusual growth mode. Here, we show multi-layer graphene domains grown on liquid or solid Cu by the chemical vapor deposition method via this ‘double-substrate’ mode. We demonstrate the interlayer-induced coupling effect on the twist angle in bi- and multi-layer graphene. We discover dramatic growth disunity for different graphene layers, which is explained by the ideas of a chemical ‘gate’ and a material transport process within a confined space. These key results lead to a consistent framework for understanding the dynamic evolution of multi-layered graphene flakes and tailoring the layer-to-layer growth for practical applications.

  1. Biogenic synthesized nanoparticles and their applications

    Science.gov (United States)

    Singh, Abhijeet; Sharma, Madan Mohan

    2016-05-01

    In the present scenario, there are growing concerns over the potential impacts of bioengineered nanoparticles in the health sector. However, our understanding of how bioengineered nanoparticles may affect organisms within natural ecosystems, lags far behind our rapidly increasing ability to engineer novel nanoparticles. To date, research on the biological impacts of bioengineered nanoparticles has primarily consisted of controlled lab studies of model organisms with single species in culture media. Here, we described a cost effective and environment friendly technique for green synthesis of silver nanoparticles. Silver nanoparticles were successfully synthesized from 1 mM AgNO3 via a green synthesis process using leaf extract as reducing as well as capping agent. Nanoparticles were characterized with the help of UV-vis absorption spectroscopy, X-ray diffraction and TEM analysis which revealed the size of nanoparticles of 30-40 nm size. Further the nanoparticles synthesized by green route are found highly toxic against pathogenic bacteria and plant pathogenic fungi viz. Escherichia coli, Pseudomonas syringae and Sclerotiniasclerotiorum. The most important outcome of this work will be the development of value-added products and protection of human health from pathogens viz., bacteria, virus, fungi etc.

  2. Recent Advances in Chemoenzymatic Peptide Syntheses

    Directory of Open Access Journals (Sweden)

    Kenjiro Yazawa

    2014-09-01

    Full Text Available Chemoenzymatic peptide synthesis is the hydrolase-catalyzed stereoselective formation of peptide bonds. It is a clean and mild procedure, unlike conventional chemical synthesis, which involves complicated and laborious protection-deprotection procedures and harsh reaction conditions. The chemoenzymatic approach has been utilized for several decades because determining the optimal conditions for conventional synthesis is often time-consuming. The synthesis of poly- and oligopeptides comprising various amino acids longer than a dipeptide continues to pose a challenge owing to the lack of knowledge about enzymatic mechanisms and owing to difficulty in optimizing the pH, temperature, and other reaction conditions. These drawbacks limit the applications of the chemoenzymatic approach. Recently, a variety of enzymes and substrates produced using recombinant techniques, substrate mimetics, and optimal reaction conditions (e.g., frozen aqueous media and ionic liquids have broadened the scope of chemoenzymatic peptide syntheses. In this review, we highlight the recent advances in the chemoenzymatic syntheses of various peptides and their use in developing new materials and biomedical applications.

  3. Biogenic synthesized nanoparticles and their applications

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Abhijeet, E-mail: abhijeet.singh@jaipur.manipal.edu; Sharma, Madan Mohan [Manipal University Jaipur (India)

    2016-05-06

    In the present scenario, there are growing concerns over the potential impacts of bioengineered nanoparticles in the health sector. However, our understanding of how bioengineered nanoparticles may affect organisms within natural ecosystems, lags far behind our rapidly increasing ability to engineer novel nanoparticles. To date, research on the biological impacts of bioengineered nanoparticles has primarily consisted of controlled lab studies of model organisms with single species in culture media. Here, we described a cost effective and environment friendly technique for green synthesis of silver nanoparticles. Silver nanoparticles were successfully synthesized from 1 mM AgNO{sub 3} via a green synthesis process using leaf extract as reducing as well as capping agent. Nanoparticles were characterized with the help of UV–vis absorption spectroscopy, X-ray diffraction and TEM analysis which revealed the size of nanoparticles of 30-40 nm size. Further the nanoparticles synthesized by green route are found highly toxic against pathogenic bacteria and plant pathogenic fungi viz. Escherichia coli, Pseudomonas syringae and Sclerotiniasclerotiorum. The most important outcome of this work will be the development of value-added products and protection of human health from pathogens viz., bacteria, virus, fungi etc.

  4. Direct formation of large-scale multi-layered germanene on Si substrate.

    Science.gov (United States)

    Tsai, Hsu-Sheng; Chen, Yu-Ze; Medina, Henry; Su, Teng-Yu; Chou, Ta-Shun; Chen, Yi-Hsuan; Chueh, Yu-Lun; Liang, Jenq-Horng

    2015-09-07

    Germanene layers with lonsdaleite structure has been synthesized from a SiGe thin film for the first time using a N2 plasma-assisted process in this investigation. Multi-layered germanene can be directly observed, and the derived lattice parameters are nearly consistent with the theoretical results. Furthermore, large-scale multi-layered germanene has also been demonstrated for applications.

  5. Copper (II) Schiff base complexes and their mixed thin layers with ...

    Indian Academy of Sciences (India)

    Copper(II) Schiff base complexes and their mixed thin layers with ZnO nanoparticles. MAGDALENA ... Keywords. Thin layer; ZnO nanoparticles; copper complexes; AFM; SEM; fluorescence. ... Zinc oxide was synthesized using a simple homogeneous precipitation method with zinc acetate as a starting material. Thin layers ...

  6. Synthesis of layered double hydroxides from eggshells

    Energy Technology Data Exchange (ETDEWEB)

    Li Songnan [Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, 150001 (China); Wang Fangyong [College of Engineering and Technology, Northeast Forestry University, 150001 (China); Jing Xiaoyan [Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, 150001 (China); Wang Jun, E-mail: zhqw1888@sohu.com [Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, 150001 (China); Saba, Jamil; Liu Qi; Ge Lan; Song Dalei; Zhang Milin [Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, 150001 (China)

    2012-01-16

    Graphical abstract: This is the XRD pattern and TEM image of 4Ca-Al layered double hydroxide, which is obtained from eggshells. It can be seen that the sample is of layered double hydroxide and shows the plate-like agglomerations with an average size of 20-100 nm. Highlights: Black-Right-Pointing-Pointer We synthesize layered double hydroxides from eggshells. Black-Right-Pointing-Pointer Eggshells are the mainly material in this method. Black-Right-Pointing-Pointer The additional alkaline solution is not required. - Abstract: Ca-Al and Ca-Fe layered double hydroxides (LDHs) were successfully synthesized from chicken eggshells by an ultrasonic wave assistant method. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FT-IR) techniques. XRD and TEM analyses showed that the 4Ca-Al LDHs were of high purity but other samples were not. The present study provides a simple, efficient and environmental friendly method to obtain LDHs from biowaste eggshells, in which additional alkaline solution is not required for synthesis. Moreover, eggshells provide all the requisite bivalent metal ions, which are needed to form layered double hydroxides.

  7. Simplification of Methods for PET Radiopharmaceutical Syntheses

    Energy Technology Data Exchange (ETDEWEB)

    Kilbourn, Michael, R.

    2011-12-27

    In an attempt to develop simplified methods for radiochemical synthesis of radiopharmaceuticals useful in Positron Emission Tomography (PET), current commercially available automated synthesis apparati were evaluated for use with solid phase synthesis, thin-film techniques, microwave-accelerated chemistry, and click chemistry approaches. Using combinations of these techniques, it was shown that these automated synthesis systems can be simply and effectively used to support the synthesis of a wide variety of carbon-11 and fluorine-18 labeled compounds, representing all of the major types of compounds synthesized and using all of the common radiochemical precursors available. These techniques are available for use to deliver clinically useful amounts of PET radiopharmaceuticals with chemical and radiochemical purities and high specific activities, suitable for human administration.

  8. Synthesizing Biomolecule-based Boolean Logic Gates

    Science.gov (United States)

    Miyamoto, Takafumi; Razavi, Shiva; DeRose, Robert; Inoue, Takanari

    2012-01-01

    One fascinating recent avenue of study in the field of synthetic biology is the creation of biomolecule-based computers. The main components of a computing device consist of an arithmetic logic unit, the control unit, memory, and the input and output devices. Boolean logic gates are at the core of the operational machinery of these parts, hence to make biocomputers a reality, biomolecular logic gates become a necessity. Indeed, with the advent of more sophisticated biological tools, both nucleic acid- and protein-based logic systems have been generated. These devices function in the context of either test tubes or living cells and yield highly specific outputs given a set of inputs. In this review, we discuss various types of biomolecular logic gates that have been synthesized, with particular emphasis on recent developments that promise increased complexity of logic gate circuitry, improved computational speed, and potential clinical applications. PMID:23526588

  9. Structure of the enzymatically synthesized fructan inulin

    Energy Technology Data Exchange (ETDEWEB)

    Heyer, A.G.; Schroeer, B. [Max-Planck-Institut fuer Molekulare Pflanzenphysiologie, Karl-Liebknecht-Str. 25, 14476 Golm (Germany); Radosta, S. [Fraunhofer-Institut fuer Angewandte Polymerforschung, Postfach 126, 14504 Teltow (Germany); Wolff, D.; Czapla, S.; Springer, J. [Technische Universitaet Berlin, FG Makromolekulare Chemie, Str. des 17. Juni 135, 10623 Berlin (Germany)

    1998-12-15

    Construction, purification and characterization of a fusion protein of maltose-binding protein of Escherichia coli and the fructosyltransferase of Streptococcus mutans is described. With the purified protein, in vitro synthesis of inulin was performed. The obtained polysaccharide was characterized by high-performance size-exclusion chromatography (HPSEC) and static light scattering (SLS) in dilute aqueous and dimethyl sulfoxide solution. For all samples very high molecular weights between 60x10{sup 6} and 90x10{sup 6} g/mol and a remarkable small polydispersity index of 1.1 have been determined. Small root-mean-square radii of gyration point to a compact conformation in dilute solution. No difference between native and enzymatically synthesized inulin was observed by X-ray powder diffraction and thermoanalysis of solid samples. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

  10. National Gas Survey. Synthesized gaseous hydrocarbon fuels

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-01

    The supply-Technical Advisory Task Force-Synthesized Gaseous Hydrocarbon Fuels considered coal, hydrocarbon liquids, oil shales, tar sands, and bioconvertible materials as potential feedstocks for gaseous fuels. Current status of process technology for each feedstock was reviewed, economic evaluations including sensitivity analysis were made, and constraints for establishment of a synthesized gaseous hydrocarbon fuels industry considered. Process technology is presently available to manufacture gaseous hydrocarbon fuels from each of the feedstocks. In 1975 there were eleven liquid feedstock SNG plants in the United States having a capacity of 1.1 billion SCFD. There can be no contribution of SNG before 1982 from plants using feedstocks other than liquids because there are no plants in operation or under construction as of 1977. Costs for SNG are higher than current regulated prices for U.S. natural gas. Because of large reserves, coal is a prime feedstock candidate although there are major constraints in the area of coal leases, mining and water permits, and others. Commercial technology is available and several new gasification processes are under development. Oil shale is also a feedstock in large supply and commercial process technology is available. There are siting and permit constraints, and water availability may limit the ultimate size of an oil shale processing industry. Under projected conditions, bioconvertible materials are not expected to support the production of large quantities of pipeline quality gas during the next decade. Production of low or medium Btu gas from municipal solid wastes can be expected to be developed in urban areas in conjunction with savings in disposal costs. In the economic evaluations presented, the most significant factor for liquid feedstock plants is the anticipated cost of feedstock and fuel. The economic viability of plants using other feedstocks is primarily dependent upon capital requirements.

  11. Enantioselective catalytic syntheses of alpha-branched chiral amines

    DEFF Research Database (Denmark)

    Brase, S.; Baumann, T.; Dahmen, S.

    2007-01-01

    Chiral amines play a pivotal role in fine chemical and natural product syntheses and the design of novel materials.......Chiral amines play a pivotal role in fine chemical and natural product syntheses and the design of novel materials....

  12. Structural properties and adsorption capacity of holocellulose aerogels synthesized from an alkali hydroxide-urea solution

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Gu-Joong; Kim, Dae-Young; Hwang, Jae-Hyun; Kang, Joo-Hyon [Dongguk University, Seoul (Korea, Republic of)

    2014-05-15

    A tulip tree was used to synthesize a holocellulose aerogel from an aqueous alkali hydroxide-urea solution with the substitution of an organic solvent followed by freeze-drying. For comparison, the synthesized holocellulose aerogels were divided into two groups according to the source of the hydrogel, an upper suspended layer and a bottom concentrated layer of the centrifuged solution of cellulose and NaOH/urea solvents. We investigated the effects of the temperature of the pre-cooled NaOH/urea solution (i.e., dissolution temperature) on the pore structure and the adsorption capacity of the holocellulose aerogel. A nano-fibrillar network structure of the holocellulose aerogel was observed, with little morphological difference in pore structure for different dissolution temperatures. Both micropores and mesopores were observed in the holocellulose aerogel. The specific surface area of the holocellulose aerogel was generally greater at lower dissolution temperatures. In a series of adsorption tests using methylene blue, the holocellulose aerogel showed the greatest adsorption capacity at the lowest dissolution temperature tested ( -2 .deg. C). However, the dissolution temperature generally had little effect on the adsorption capacity. The holocellulose aerogel produced from the upper suspended layer of the centrifuged hydrogel solution showed a greater porosity and adsorption capacity than the one produced from the bottom concentrated layer. Overall, the aerogel made by utilizing a delignified tulip tree display a high surface area and a high adsorption property, indicating its possible application in eco-friendly adsorption materials.

  13. Characterization of carbon cryogels synthesized by sol-gel polycondensation

    Directory of Open Access Journals (Sweden)

    BILJANA BABIC

    2005-02-01

    Full Text Available Resorcinol-formaldehyde (RF cryogels were synthesized by the sol-gel polycondensation of resorcinol (R with formaldehyde (F and freeze-drying was carried out with t-butanol. Carbon cryogels were obtained by pyrolyzing RF cryogels in an inert atmosphere. Characterization by nitrogen adsorption showed that the carbon cryogels were micro and mesoporous materials with high specific surface areas (SBET ~ 550 m2/g. Cyclic voltammetry experiments at various scan rates (2 to 200 mV s-1 were performed to study the electrical double-layer charging of carbon cryogel electrodes in 0.5 mol dm-3 HClO4 solution. It has been demonstrated that it is possible to sub-divide the total specific capacitance into the mesoporous and the microporous specific capacitance by analyzing the linear dependence of the charge (q on the reciprocal of the square root of the potential scan rate (v-1/2, and the linear dependence of the reciprocal charge (1/q on the square root of the potential scan rate (v-1/2. The specific capacitance was found to be constant over a wide range of sample weight (12.5 to 50.0 mg and a very promising specific capacitance value of 150 F/g, was found for this material operating in an acidic 0.5 mol dm-3 HClO4 solution at room temperature.

  14. Effect of zinc oxide nanoparticles synthesized by a precipitation ...

    Indian Academy of Sciences (India)

    ZnO nanoparticles were synthesized by a precipitation method in aqueous media from zinc nitrate hexahydrate and sodium hydroxide. The synthesized ZnO nanoparticles exhibited a crystalline structure with hexagonal structure of the wurtzite. The morphology of the synthesized ZnO nanoparticles presented a spherical ...

  15. Rational assembly of Pb(II)/Cd(II)/Mn(II) coordination polymers based on flexible V-shaped dicarboxylate ligand: Syntheses, helical structures and properties

    Science.gov (United States)

    Yang, Gao-Shan; Liu, Chong-Bo; Liu, Hong; Robbins, Julianne; Zhang, Z. John; Yin, Hong-Shan; Wen, Hui-Liang; Wang, Yu-Hua

    2015-05-01

    Six new coordination polymers, namely, [Pb(L)(H2O)] (1), [Pb(L)(phen)] (2), [Pb2(L)2(4,4‧-bipy)0.5] (3), [Cd(L)(phen)] (4), [Cd(L)(4,4‧-bipy)]·H2O (5) and [Mn(L)(4,4‧-bipy)]·H2O (6) have been synthesized by the hydrothermal reaction of 2,2‧-[hexafluoroisopropylidenebis(p-phenyleneoxy)]diacetic acid (H2L) with Pb(II)/Cd(II)/Mn(II) in the presence of ancillary ligands 4,4‧-bipyridine (4,4‧-bipy) or 1,10-phenanthroline (phen). Complexes 1 and 4-6 exhibit 2-D structures, and complexes 2-3 display 3-D frameworks, of which L2- ligands join metal ions to single-stranded helical chains of 1, 3-6 and double-stranded helical chains of 2. Complexes 2 and 3 also contain double-stranded Metal-O helices. Topology analysis reveals that complexes 1 and 4 both represent 4-connected sql net, 2 represents 6-connected pcu net, 3 exhibits a novel (3,12)-connected net, while 5 and 6 display (3,5)-connected gek1 net. The six complexes exhibit two kinds of inorganic-organic connectivities: I0O2 for 1, 4-6, and I1O2 for 2-3. The photoluminescent properties of 4-5 and the magnetic properties of 6 have been investigated.

  16. Onion-like multilayered polymer capsules synthesized by a bioinspired inside-out technique.

    Science.gov (United States)

    Zarket, Brady C; Raghavan, Srinivasa R

    2017-08-04

    Diverse structures in nature, such as the spinal disc and the onion have many concentric layers, and are created starting from the core and proceeding outwards. Here, we demonstrate an inside-out technique for creating multilayered polymer capsules. First, an initiator-loaded gel core is placed in a solution of monomer 1. The initiator diffuses outward and induces polymerization, leading to a shell of polymer 1. Thereafter, the core-shell structure is loaded with fresh initiator and placed in monomer 2, which causes a concentric shell of polymer 2 to form around the first shell. This process can be repeated to form multiple layers, each of a distinct polymer, and of controlled layer thickness. We show that these multilayered capsules can exhibit remarkable mechanical resilience as well as stimuli-responsive properties. The release of solutes from these capsules can be tailored to follow specific profiles depending on the chemistry and order of adjacent layers.Multiple concentric layers are present in a variety of structures present in nature, including the onion. Here, the authors show an inside-out strategy to synthesize multilayered polymer capsules, with different layers having specific composition and thereby specific responses to stimuli such as pH and temperature.

  17. The multilayered structure of ultrathin amorphous carbon films synthesized by filtered cathodic vacuum arc deposition

    KAUST Repository

    Wang, Na

    2013-08-01

    The structure of ultrathin amorphous carbon (a-C) films synthesized by filtered cathodic vacuum arc (FCVA) deposition was investigated by high-resolution transmission electron microscopy, electron energy loss spectroscopy, and x-ray photoelectron spectroscopy. Results of the plasmon excitation energy shift and through-thickness elemental concentration show a multilayered a-C film structure comprising an interface layer consisting of C, Si, and, possibly, SiC, a buffer layer with continuously increasing sp 3 fraction, a relatively thicker layer (bulk film) of constant sp 3 content, and an ultrathin surface layer rich in sp 2 hybridization. A detailed study of the C K-edge spectrum indicates that the buffer layer between the interface layer and the bulk film is due to the partial backscattering of C+ ions interacting with the heavy atoms of the silicon substrate. The results of this study provide insight into the minimum thickness of a-C films deposited by FCVA under optimum substrate bias conditions. Copyright © 2013 Materials Research Society.

  18. Studies on the hyaluronate binding properties of newly synthesized proteoglycans purified from articular chondrocyte cultures

    Energy Technology Data Exchange (ETDEWEB)

    Sandy, J.D.; Plaas, A.H.

    1989-06-01

    Primary cultures of rabbit articular chondrocytes have been maintained for 10 days and labeled with (35S)sulfate, (3H)leucine, and (35S)cysteine in pulse-chase protocols to study the structure and hyaluronate binding properties of newly synthesized proteoglycan monomers. Radiolabeled monomers were purified from medium and cell-layer fractions by dissociative CsCl gradient centrifugation with bovine carrier monomer, and analyzed for hyaluronate binding affinity on Sepharose CL-2B in 0.5 M Na acetate, 0.1% Triton X-100, pH 6.8. Detergent was necessary to prevent self-association of newly synthesized monomers during chromatography. Monomers secreted during a 30-min pulse labeling with (35S)sulfate had a low affinity relative to carrier. Those molecules released into the medium during the first 12 h of chase remained in the low affinity form whereas those retained by the cell layer rapidly acquired high affinity. In cultures where more than 90% of the preformed cell-layer proteoglycan was removed by hyaluronidase digestion before radiolabeling the newly synthesized low affinity monomers also rapidly acquired high affinity if retained in the cell layer. Cultures labeled with amino acid precursors were used to establish the purity of monomer preparations and to isolate core proteins for study. Leucine- or cysteine-labeled core proteins derived from either low or high affinity monomer preparations migrated as a single major species on sodium dodecyl sulfate-polyacrylamide gel electrophoresis with electrophoretic mobility very similar to that of core protein derived from extracted proteoglycan monomer. Purified low affinity monomers were converted to the high affinity form by treatment at pH 8.6; however, this change was prevented by guanidinium-HCl at concentrations above 0.8 M.

  19. Artificially stacked atomic layers: toward new van der Waals solids.

    Science.gov (United States)

    Gao, Guanhui; Gao, Wei; Cannuccia, E; Taha-Tijerina, Jaime; Balicas, Luis; Mathkar, Akshay; Narayanan, T N; Liu, Zhen; Gupta, Bipin K; Peng, Juan; Yin, Yansheng; Rubio, Angel; Ajayan, Pulickel M

    2012-07-11

    Strong in-plane bonding and weak van der Waals interplanar interactions characterize a large number of layered materials, as epitomized by graphite. The advent of graphene (G), individual layers from graphite, and atomic layers isolated from a few other van der Waals bonded layered compounds has enabled the ability to pick, place, and stack atomic layers of arbitrary compositions and build unique layered materials, which would be otherwise impossible to synthesize via other known techniques. Here we demonstrate this concept for solids consisting of randomly stacked layers of graphene and hexagonal boron nitride (h-BN). Dispersions of exfoliated h-BN layers and graphene have been prepared by liquid phase exfoliation methods and mixed, in various concentrations, to create artificially stacked h-BN/G solids. These van der Waals stacked hybrid solid materials show interesting electrical, mechanical, and optical properties distinctly different from their starting parent layers. From extensive first principle calculations we identify (i) a novel approach to control the dipole at the h-BN/G interface by properly sandwiching or sliding layers of h-BN and graphene, and (ii) a way to inject carriers in graphene upon UV excitations of the Frenkell-like excitons of the h-BN layer(s). Our combined approach could be used to create artificial materials, made predominantly from inter planar van der Waals stacking of robust bond saturated atomic layers of different solids with vastly different properties.

  20. Syntheses of surfactants from oleochemical epoxides

    Directory of Open Access Journals (Sweden)

    Warwel Siegfried

    2001-01-01

    Full Text Available Sugar-based surfactants were obtained in good yields (up to 100% under mild conditions (70°C, methanol or mixtures of methanol and water by ring-opening of terminal epoxides with aminopolyols, derived from glucose. Reaction of N-methyl glucamine with epoxides from even-numbered C4-C18 alpha-olefins or from terminal unsaturated fatty acid methyl esters leads to linear products, while corresponding reactions with N-dodecyl glucamine or glucamine yield surfactants with different Y-structures. Products obtained by conversion of omega-epoxy fatty acid methyl esters were saponificated with NaOH or hydrolyzed enzymatically to sodium salts or free acids respectively, which are amphoteric surfactants. Studies of the surfactants at different pH-values demonstrate different surface active properties in aqueous solutions. Critical micelle concentrations (c.m.c. in a range between 2 and 500mg/l and surface tensions of 25-40mN/m were measured for several of the synthesized sugar-based surfactants. The ring-opening products are rather poor foamers, whereas some of the corresponding hydrobromides show good foaming properties.

  1. [Femicides in ethnic and racialized groups: syntheses].

    Science.gov (United States)

    Meneghel, Stela Nazareth; Lerma, Betty Ruth Lozano

    2017-01-01

    The text entitled "Femicides in ethnic and racialized groups: syntheses" presents some of the discussions that took place during a seminar on this topic in Buenaventura. Buenaventura is the main Colombian port on the Pacific, a region rich in minerals and a corridor for the movement of goods, which makes it a strategic territory and a center for disputes. At the seminar, the social and political determinants of femicide were discussed, understanding it as a tactic of waging war against women. The forum provided a space for academic discussion, but also for grievances over inter-personal violence, the manifestation of feelings and the elaboration of pain and grief through the medium of art. We believe that the dissemination of this experience to the Brazilian public, in a country with ethnic, social and racial vulnerability similar to that in Colombia, will be of value to social and health workers. The scope of this paper is therefore to provide the opinion of its authors on the determinants of femicides and on actions to tackle them, in addition to a synthesis of the discussions and debates that permeated the event.

  2. Oligodendrocyte precursor cells synthesize neuromodulatory factors.

    Directory of Open Access Journals (Sweden)

    Dominik Sakry

    Full Text Available NG2 protein-expressing oligodendrocyte progenitor cells (OPC are a persisting and major glial cell population in the adult mammalian brain. Direct synaptic innervation of OPC by neurons throughout the brain together with their ability to sense neuronal network activity raises the question of additional physiological roles of OPC, supplementary to generating myelinating oligodendrocytes. In this study we investigated whether OPC express neuromodulatory factors, typically synthesized by other CNS cell types. Our results show that OPC express two well-characterized neuromodulatory proteins: Prostaglandin D2 synthase (PTGDS and neuronal Pentraxin 2 (Nptx2/Narp. Expression levels of the enzyme PTGDS are influenced in cultured OPC by the NG2 intracellular region which can be released by cleavage and localizes to glial nuclei upon transfection. Furthermore PTGDS mRNA levels are reduced in OPC from NG2-KO mouse brain compared to WT cells after isolation by cell sorting and direct analysis. These results show that OPC can contribute to the expression of these proteins within the CNS and suggest PTGDS expression as a downstream target of NG2 signaling.

  3. A futuristic approach towards interface layer modifications for improved efficiency in inverted organic solar cells

    Science.gov (United States)

    Tiwari, J. P.; Pillai, Sriraj; Parakh, Sonal; Ali, Farman; Sharma, Abhishek; Chand, Suresh

    2014-01-01

    Inverted polymer Solar Cells of the classical poly (3-hexylthiophene) (P3HT):(6,6)-phenyl-C61butyric acid methyl ester (PC61BM) blend on indium tin oxide substrates were fabricated, which shows improved device performance, by using a facile solution-processed ZnO-polyelectrolytes [poly (diallyldimethylammonium chloride) (PDADMAC), Poly (acrylic acid sodium salt) (PAS), poly (4-styrenesulfonic acid) (PSS), and Polyvinylpyrrolidone (PVP)] nanocomposite as a cathode interface layer compared to devices using pristine ZnO as cathode buffer layer in ambient conditions. The devices with different combinations of polyelectrolyte with ZnO show different improvements in the device efficiency. The combinations of ZnO with PVP and PDADMAC show highest amount of improvements in the efficiency by a factor of ˜17-19. The improvement of the efficiency may be due to various phenomena, such as the passivation of ZnO surface as well as bulk traps, work function modification, improved energy level alignment, improved electronic coupling of the inorganic/organic interface, improved light harvesting, and decrease of surface as well as bulk charge recombination in the device. The introduction of polyelectrolyte into ZnO inhibits the aggregation of ZnO nanoparticles yielding the large area ZnO nanoclusters; and hence, forming the uniform film of ZnO resulting in the modifications of morphology as well as electronic structure of ZnO-polyelectrolyte nano-composite favouring better electronic coupling between cathode and active layer and hence enhancing the current and, consequently, the efficiency. This simple low temperature ZnO-polyelectrolyte nanocomposite based protocol proposed for cathode interface layer modification may be very much useful for roll to roll industrial manufacturing of organic solar cells.

  4. Synthesis and characterization of two novel inorganic/organic hybrid materials based on polyoxomolybdate clusters: (C5H5N5)2(C5H6N5)4[(HAsO4)2Mo6O18]·11H2O and Na2(Himi)3[SeMo6O21(CH3COO)3]·6H2O

    Science.gov (United States)

    Ayed, Meriem; Mestiri, Imen; Ayed, Brahim; Haddad, Amor

    2017-01-01

    Two new organic-inorganic hybrid compound, (C5H5N5)2(C5H6N5)4[(HAsO4)2Mo6O18]·11H2O (I) and Na2(Himi)3[SeMo6O21(CH3COO)3]·6H2O (II) were synthesized and structurally characterized by scanning electron microscopy (SEM), elemental analyses, FTIR, UV spectroscopy, thermal stability analysis, XRD and single crystal X-ray diffraction. Crystal data: (I) triclinic system, space group P-1, a = 11,217 (9) Å, b = 11,637 (8) Å, c = 14,919 (8) Å, α = 70,90 (5)°, β = 70,83 (2)°, γ = 62,00(1)° and Z = 1; (II) triclinic system, space group P-1, a = 10.6740(1) Å, b = 10.6740(1) Å, c = 20.0570(1) Å, α = 76.285(1)°, β = 82.198(2)°, γ = 87.075(1)°, Z = 1. The crystal structure of (I) can be described by infinite polyanions [(HAsO4)2Mo6O18]4- organized with water molecules in layers parallel to the c-direction; adjacent layers are further joined up by hydrogen bonding interactions with organic groups which were associated in chains spreading along the b-direction. The structure of (II) consists of functionalized selenomolybdate clusters [SeMo6O21(CH3COO)3]5-, protonated imidazole cations, sodium ions and lattice water molecules, which are held together to generate a three-dimensional supramolecular network via hydrogen-bonding interaction. Furthermore, the electrochemical properties of these compounds have been studied.

  5. Nanostructured bioglass thin films synthesized by pulsed laser deposition: CSLM, FTIR investigations and in vitro biotests

    Science.gov (United States)

    Floroian, L.; Savu, B.; Stanciu, G.; Popescu, A. C.; Sima, F.; Mihailescu, I. N.; Mustata, R.; Sima, L. E.; Petrescu, S. M.; Tanaskovic, D.; Janackovic, Dj.

    2008-12-01

    We report the synthesis by pulsed laser deposition of thin structures of two bioactive glasses belonging to the SiO 2-Na 2O-K 2O-CaO-MgO-P 2O 5 system, on medical grade Ti substrates. We evaluated their biocompatibility after immersion in simulated body fluids and by performing cells adhesion tests. The films were characterized by confocal scanning laser microscopy and Fourier transform infrared spectrometry, before and after 30 and 46 days immersion in fluids. Our studies demonstrated that deposited coatings were degraded in simulated fluids. A new apatite layer was synthesized by ions changing with the fluid during the decomposition of bioglasses. We investigated after immersion in fluids cells adhesion and the cytoskelet organization of synthesized structures, by fluorescence microscopy. A good adhesion to bioglass coatings was evidenced.

  6. Toward tailorable surfaces: A combined theoretical and experimental study of lanthanum niobate layered perovskites

    Science.gov (United States)

    Di Tommaso, Stefania; Giannici, Francesco; Mossuto Marculescu, Adriana; Martorana, Antonino; Adamo, Carlo; Labat, Frédèric

    2014-07-01

    A comprehensive theoretical investigation of the MLaNb2O7 (M = H, Li, Na, K, Rb, and Cs) series of ion-exchangeable layered perovskite is presented. These perovskites are in particular interesting in view of their potential applications as inorganic supports for the design of new hybrid inorganic-organic proton conductors. In particular, their structural and electronic properties have been investigated by periodic calculations in the framework of Density Functional Theory, using different exchange-correlation functionals. A general very good agreement with the available experimental (XRD, NPD, and EXAFS) data has been found. The structure of the protonated HLaNb2O7 form has also been further clarified and a new tetragonal space group is proposed for this compound, better reproducing the experimental cell parameters and yielding to a more realistic picture of the system. The electronic investigation highlighted that all the compounds considered are very similar to each other and that the interaction between interlayer cations and perovskite slabs is purely ionic, except for the proton that is, instead, covalently bound.

  7. Photoluminescence of Sequential Infiltration Synthesized ZnO nanostructures

    Science.gov (United States)

    Ocola, Leonidas; Gosztola, David; Yanguas-Gil, Angel; Connolly, Aine

    We have investigated a variation of atomic layer deposition (ALD), called sequential infiltration synthesis (SiS), as an alternate method to incorporate ZnO and other oxides inside polymethylmethacrylate (PMMA) and other polymers. Energy dispersive spectroscopy (EDS) results show that we synthesize ZnO up to 300 nm inside a PMMA film. Photoluminescence data on a PMMA film shows that we achieve a factor of 400X increase in photoluminescence (PL) intensity when comparing a blank Si sample and a 270 nm thick PMMA film, where both were treated with the same 12 alternating cycles of H2O and diethyl zinc (DEZ). PMMA is a well-known ebeam resist. We can expose and develop patterns useful for photonics or sensing applications first, and then convert them afterwards into a hybrid polymer-oxide material. We show that patterning does indeed affect the photoluminescence signature of native ZnO. We demonstrate we can track the growth of the ZnO inside the PMMA polymer using both photoluminescence and Raman spectroscopy and determine the point in the process where ZnO is first photoluminescent and also at which point ZnO first exhibits long range order in the polymer. This work was supported by the Department of Energy under Contract No. DE-AC02-06CH11357. Use of the Center for Nanoscale Materials was supported by the U. S. Department of Energy, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357.

  8. Modification of Lime Mortars with Synthesized Aluminosilicates

    Science.gov (United States)

    Loganina, Valentina I.; Sadovnikova, Marija E.; Jezierski, Walery; Małaszkiewicz, Dorota

    2017-10-01

    The increasing attention for restoration of buildings of historical and architectural importance has increased the interest for lime-based binders, which could be applied for manufacturing repair mortars and plasters compatible with historical heritage. Different additives, admixtures or fibers may be incorporated to improve mechanical and thermal features of such materials. In this study synthesized aluminosilicates (SA) were applied as an additive for lime mortar. The technology of synthesis consisted in the deposition of aluminosilicates from a sodium liquid glass by the aluminum sulphate Al2(SO4)3. The goal of this investigation was developing a new method of aluminosilicates synthesis from a sodium liquid glass and using this new material as a component for a lime mortar. Aluminosilicates were precipitated from the solution of aluminum sulphate Al2(SO)3 and sodium silicate. SA were then used as an additive to calcareous compositions and their influence was tested. Mortars were prepared with commercial air lime and siliceous river sand. Air lime binder was replaced by 5 and 10 wt.% of SA. Calcareous composition specimens were formed at water/lime ratio 1.0. The following analyses were made: grain size distribution of SA, X-ray diffraction analysis (XRD), sorption properties, plastic strength and compressive strength of lime mortars. XRD pattern of the SA shows the presence of thenardite, gibbsite and amorphous phase represented by aggregate of nano-size cristobalite-like crystallites. Application of SA leads to increase of compressive strength after 90 days of hardening by 28% and 53% at SA content 5 and 10% respectively comparing to specimens without this additive. Contents of chemically bound lime in the reference specimens after 28 days of hardening in air-dry conditions was 46.5%, while in specimens modified with SA contained 50.0-55.3% of bound lime depending on filtrate pH. This testifies to high activity of calcareous composition. The new blended lime

  9. Basic Ozone Layer Science

    Science.gov (United States)

    Learn about the ozone layer and how human activities deplete it. This page provides information on the chemical processes that lead to ozone layer depletion, and scientists' efforts to understand them.

  10. VSWI Wetlands Advisory Layer

    Data.gov (United States)

    Vermont Center for Geographic Information — This dataset represents the DEC Wetlands Program's Advisory layer. This layer makes the most up-to-date, non-jurisdictional, wetlands mapping avaiable to the public...

  11. Inverted polymer solar cells with employing of electrochemical-anodizing synthesized TiO2 nanotubes

    Science.gov (United States)

    Mehdi, Ahmadi; Sajjad Rashidi, Dafeh; Hamed, Fatehy

    2016-04-01

    An inverted structure of polymer solar cells based on Poly(3-hexylthiophene)(P3HT):[6-6] Phenyl-(6) butyric acid methyl ester (PCBM) with using thin films of TiO2 nanotubes and nanoparticles as an efficient cathode buffer layer is developed. A total of three cells employing TiO2 thin films with different thickness values are fabricated. Two cells use layers of TiO2 nanotubes prepared via self-organized electrochemical-anodizing leading to thickness values of 203 and 423.7 nm, while the other cell uses only a simple sol-gel synthesized TiO2 thin film of nanoparticles with a thickness of 100 nm as electron transport layer. Experimental results demonstrate that TiO2 nanotubes with these thickness values are inefficient as the power conversion efficiency of the cell using 100-nm TiO2 thin film is 1.55%, which is more than the best power conversion efficiency of other cells. This can be a result of the weakness of the electrochemical anodizing method to grow nanotubes with lower thickness values. In fact as the TiO2 nanotubes grow in length the series resistance (R s) between the active polymer layer and electron transport layer increases, meanwhile the fill factor of cells falls dramatically which finally downgrades the power conversion efficiency of the cells as the fill factor falls.

  12. Synthesizing Smart Polymeric and Composite Materials

    Science.gov (United States)

    Gong, Chaokun

    ,1-phenylene)bismaleimide (MDPB). It showed the same healing ability as 2MEP4F while all starting materials are cheaper and commercially available. To further improve the mechanical strength of the PFA-MDPB healable polymer, epoxy as a strengthening component was mixed with PFA-MDPB healable polymer. The PFA, MDPB and epoxy composite polymers were further reinforced by carbon fiber as done with 2MEP4F matrix and the final composites were proved to have higher short beam shear strength than 2MEP4F while exhibiting a similar healing efficiency. Healable polymer MDPB (a two maleimide groups monomer) -- FGEEDR (a four furan groups monomer) was also designed and synthesized for transparent healable polymer. The MDPB-FGEEDR healable polymer was composited with silver nanowires (AgNWs) to afford healable transparent composite conductor. Razer blade cuts in the composite conductor could heal upon heating to recover the mechanical strength and electrical conductivity of the composite. The healing could be repeated for multiple times on the same cut location. The healing process was as fast as 3 minutes for conductivity to recover 97% of the original value. For electroactive polymer polypyrrole, the fast volume change upon electrical field change due to electrochemical oxidization or reduction was studied for actuation targeting toward a robotic application. The flexibility of polypyrrole was improved via copolymerization with pyrrole derivatives. Actuator devices are fabricated that more suitable for implantable medical device application than pyrrole homopolymer. The change of dipole re-orientation and thus dielectric constant of ferroelectric polymers and ceramics upon electrical field may be exploited for electrocaloric effect (ECE) and solid state refrigeration. For ferroelectric ceramics, we synthesized a series of Ba1-xSrxTiO3 nanoparticles with diameter ranging from 8-12 nm and characterized their dielectric and ferroelectric properties through hysteresis measurement. It was

  13. Layer-by-layer cell membrane assembly

    Science.gov (United States)

    Matosevic, Sandro; Paegel, Brian M.

    2013-11-01

    Eukaryotic subcellular membrane systems, such as the nuclear envelope or endoplasmic reticulum, present a rich array of architecturally and compositionally complex supramolecular targets that are as yet inaccessible. Here we describe layer-by-layer phospholipid membrane assembly on microfluidic droplets, a route to structures with defined compositional asymmetry and lamellarity. Starting with phospholipid-stabilized water-in-oil droplets trapped in a static droplet array, lipid monolayer deposition proceeds as oil/water-phase boundaries pass over the droplets. Unilamellar vesicles assembled layer-by-layer support functional insertion both of purified and of in situ expressed membrane proteins. Synthesis and chemical probing of asymmetric unilamellar and double-bilayer vesicles demonstrate the programmability of both membrane lamellarity and lipid-leaflet composition during assembly. The immobilized vesicle arrays are a pragmatic experimental platform for biophysical studies of membranes and their associated proteins, particularly complexes that assemble and function in multilamellar contexts in vivo.

  14. Photonic layered media

    Science.gov (United States)

    Fleming, James G.; Lin, Shawn-Yu

    2002-01-01

    A new class of structured dielectric media which exhibit significant photonic bandstructure has been invented. The new structures, called photonic layered media, are easy to fabricate using existing layer-by-layer growth techniques, and offer the ability to significantly extend our practical ability to tailor the properties of such optical materials.

  15. Electrochemical behavior of the graphene materials synthesized using low temperature plasma

    Science.gov (United States)

    Shavelkina, M. B.; Amirov, R. H.; Richagov, A. Y.; Shatalova, T. B.

    2017-01-01

    By means of DC plasma torch of up to 45 kW power, few-layered graphene sheets were obtained. Their properties and structure were characterized by using electron microscopy, thermal analysis, Raman and infrared (IR) spectroscopy. Boundary surface of samples have been investigated using the method of “limited evaporation” and BET method. Electrochemical examination of their properties was conducted. Due to the activity and stability of synthesized materials the conclusion was made regarding the possibility of the use of them as catalysts carriers for fuel cells electrodes, electric current sources, conducting additives for electrodes in non-aqueous electrolytes.

  16. Synthesizing Dynamic Patterns by Spatial-Temporal Generative ConvNet

    OpenAIRE

    Xie, Jianwen; Zhu, Song-Chun; Wu, Ying Nian

    2016-01-01

    Video sequences contain rich dynamic patterns, such as dynamic texture patterns that exhibit stationarity in the temporal domain, and action patterns that are non-stationary in either spatial or temporal domain. We show that a spatial-temporal generative ConvNet can be used to model and synthesize dynamic patterns. The model defines a probability distribution on the video sequence, and the log probability is defined by a spatial-temporal ConvNet that consists of multiple layers of spatial-tem...

  17. Metal oxide nanoparticles synthesized by pulsed laser ablation for proton exchange membrane fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Dorcioman, G.; Serban, N.; Axente, E.; Sima, F.; Ristoscu, C.; Mihailescu, I.N. [Lasers Department, National Institute for Lasers, Plasma and Radiations Physics, 409 Atomistilor Street, PO Box MG-54, RO-77125, Magurele, Ilfov (Romania); Ebrasu, D. [National Research and Development Institute for Cryogenics and Isotopic Technologies - ICSI Rm. Valcea, RO-240050 (Romania); Enculescu, I. [National Institute of Materials Physics, 105 Bis Atomistilor Street, RO-77125, Magurele, Ilfov (Romania)

    2010-12-01

    We report on the development of a modified gas diffusion layer for fuel cells consisting of a simple or teflonized carbon cloth pulsed laser deposited with metal oxide nanostructures designed to operate both as co-catalyst, and oxidic support for other electrochemically active catalysts. We selected TiO{sub 2}, ZnO and Al{sub 2}O{sub 3} doped (2 wt.%) ZnO which were uniformly distributed over the surface of gas diffusion layers in order to improve the catalytic activity, stability and lifetime, and reduce the production costs of proton exchange membrane fuel cells. We evidenced by scanning electron microscopy and energy dispersive spectroscopy that our depositions consisted of TiO{sub 2} nanoparticles while in the case of ZnO and Al{sub 2}O{sub 3} doped (2 wt.%) ZnO transparent quasi-continuous films were synthesized. (author)

  18. Biogenic ZnO nanoparticles synthesized using L. aculeata leaf ...

    Indian Academy of Sciences (India)

    In this study, Zinc oxide (ZnO) nanoparticles were synthesized using aqueous extract of Lantana aculeata Linn. leaf and assessed their effects on antifungal activity against the plant fungal pathogens. Synthesized nanoparticles were confirmed by ultraviolet–visible spectroscopy, Fourier transform infrared spectrometer, ...

  19. Effect of aging on copper nanoparticles synthesized by pulsed laser ...

    Indian Academy of Sciences (India)

    Effect of aging on copper nanoparticles synthesized by pulsed laser ablation of copper plate in water was studied. By characterization studies of the aged nanoparticles, it is found that copper nanoparticles converted into Cu@Cu2O nanostructure. The synthesized nanomaterial is characterized with UV-Visible absorption, ...

  20. Comparative study of synthesized silver and gold nanoparticles ...

    Indian Academy of Sciences (India)

    Abstract. Nanotechnology is an emerging field in science and technology, which can be applied to synthesize new materials at the nanoscale level. The present investigation aimed at comparing the synthesis, characterization and in vitro anticancer efficacy of synthesized silver and gold nanoparticles using leaves extract of ...

  1. Impact of new synthesized analogues of dehydroacetic acid on ...

    African Journals Online (AJOL)

    Previous work indicated that some of the new synthesized analogues of dehydroacetic acid (DHA) were inhibitory to the growth of mycotoxin producing moulds and accumulation of aflatoxin B1 (AFB1) and ochratoxin A (OTA). The objective of this study was to determine the specific new synthesized chemical compounds ...

  2. Syntheses and absorption–structure relationships of some new ...

    Indian Academy of Sciences (India)

    New biheterocyclic compound was synthesized as starting material to prepare new photosensitizers mono-, tri-, substituted tri-, azadimethine and mixed cyanine dyes. Absorption-structure relationship of the synthesized cyanine dyes were determined by studying their electronic spectral behaviour in ethanol. The structure of ...

  3. Written Rhetorical Syntheses: Processes and Products. Technical Report No. 17.

    Science.gov (United States)

    Kantz, Margaret J.

    When students write syntheses in response to a rhetorical task, does the rhetorical nature of the task exert some special influence on the students' composing processes? How do these processes differ? Three case studies, quantitative analyses of papers written by seventeen undergraduates, and a tentative model of a synthesizing process address…

  4. Potentiometric study of polyaniline film synthesized with various ...

    Indian Academy of Sciences (India)

    The potentiometric study of polyaniline (PANI) film synthesized with dopants viz. polyvinyl sulfonic acid (PVS), -toluene sulfonic acid (TS), dodecyl benzene sulfonic acid (DBS) and composite-dopants viz. PVS–TS and PVS–DBS, has been carried out. The synthesized PANI films were characterized by electrochemical ...

  5. Comparative study of synthesized silver and gold nanoparticles ...

    Indian Academy of Sciences (India)

    Nanotechnology is an emerging field in science and technology, which can be applied to synthesize new materials at the nanoscale level. The present investigation aimed at comparing the synthesis, characterization andin vitro anticancer efficacy of synthesized silver and gold nanoparticles using leaves extract of Bauhinia ...

  6. Syntheses of (±-Romucosine and (±-Cathafiline

    Directory of Open Access Journals (Sweden)

    Surachai Nimgirawath

    2006-11-01

    Full Text Available The structures previously assigned to (--romucosine and (+-cathafiline, N-(methoxycarbonyl aporphine alkaloids from Rollina mucosa (Annonaceae and Cassytha filiformis (Lauraceae respectively, have been confirmed by total syntheses of the racemic substances. The key step of the syntheses involved formation of ring C of the aporphines by a radical-initiated cyclisation.

  7. Enhanced adhesion for LIGA microfabrication by using a buffer layer

    Energy Technology Data Exchange (ETDEWEB)

    Bajikar, Sateesh S.; DeCarlo, Francesco; Song, Joshua J.

    1998-05-22

    The present invention is an improvement on the LIGA microfabrication process wherein a buffer layer is applied to the upper or working surface of a substrate prior to the placement of a resist onto the surface of the substrate. The buffer layer is made from an inert low-Z material (low atomic weight), a material that absorbs secondary X-rays emissions from the substrate that are generated from the substrate upon exposure to a primary X-rays source. Suitable materials for the buffer layer include polyamides and polyimide. The preferred polyimide is synthesized from pyromellitic anhydride and oxydianiline (PMDA-ODA).

  8. Enhanced adhesion for LIGA microfabrication by using a buffer layer

    Energy Technology Data Exchange (ETDEWEB)

    Bajikar, Sateesh S.; De Carlo, Francesco; Song, Joshua J.

    2004-01-27

    The present invention is an improvement on the LIGA microfabrication process wherein a buffer layer is applied to the upper or working surface of a substrate prior to the placement of a resist onto the surface of the substrate. The buffer layer is made from an inert low-Z material (low atomic weight), a material that absorbs secondary X-rays emissions from the substrate that are generated from the substrate upon exposure to a primary X-rays source. Suitable materials for the buffer layer include polyamides and polyimide. The preferred polyimide is synthesized form pyromellitic anhydride and oxydianiline (PMDA-ODA).

  9. Enhanced adhesion for LIGA microfabrication by using a buffer layer

    Energy Technology Data Exchange (ETDEWEB)

    Bajikar, Sateesh S. (San Jose, CA); De Carlo, Francesco (Darien, IL); Song, Joshua J. (Naperville, IL)

    2001-01-01

    The present invention is an improvement on the LIGA microfabrication process wherein a buffer layer is applied to the upper or working surface of a substrate prior to the placement of a resist onto the surface of the substrate. The buffer layer is made from an inert low-Z material (low atomic weight), a material that absorbs secondary X-rays emissions from the substrate that are generated from the substrate upon exposure to a primary X-rays source. Suitable materials for the buffer layer include polyamides and polyimide. The preferred polyimide is synthesized form pyromellitic anhydride and oxydianiline (PMDA-ODA).

  10. Piezoelectric Resonator with Two Layers

    Science.gov (United States)

    Stephanou, Philip J. (Inventor); Black, Justin P. (Inventor)

    2013-01-01

    A piezoelectric resonator device includes: a top electrode layer with a patterned structure, a top piezoelectric layer adjacent to the top layer, a middle metal layer adjacent to the top piezoelectric layer opposite the top layer, a bottom piezoelectric layer adjacent to the middle layer opposite the top piezoelectric layer, and a bottom electrode layer with a patterned structure and adjacent to the bottom piezoelectric layer opposite the middle layer. The top layer includes a first plurality of electrodes inter-digitated with a second plurality of electrodes. A first one of the electrodes in the top layer and a first one of the electrodes in the bottom layer are coupled to a first contact, and a second one of the electrodes in the top layer and a second one of the electrodes in the bottom layer are coupled to a second contact.

  11. Modeling Transport Layer Protocols

    Science.gov (United States)

    Sasnauskas, Raimondas; Weingaertner, Elias

    In a layered communication architecture, transport layer protocols handle the data exchange between processes on different hosts over potentially lossy communication channels. Typically, transport layer protocols are either connection-oriented or are based on the transmission of individual datagrams. Well known transport protocols are the connection-oriented Transmission Control Protocol (TCP) [372] and the User Datagram Protocol (UDP) [370] as well as the Stream Control Transmission Protocol (SCTP) [340] and DCCP, the Datagram Congestion Control Protocol [259]. In this chapter, we focus on the modeling process of the transport layer. While we mostly use TCP and UDP as a base of comparison from this point, we emphasize that the methodologies discussed further on are conferrable to virtually any transport layer in any layered communication architecture.

  12. Multi-layers castings

    Directory of Open Access Journals (Sweden)

    J. Szajnar

    2010-01-01

    Full Text Available In paper is presented the possibility of making of multi-layers cast steel castings in result of connection of casting and welding coating technologies. First layer was composite surface layer on the basis of Fe-Cr-C alloy, which was put directly in founding process of cast carbon steel 200–450 with use of preparation of mould cavity method. Second layer were padding welds, which were put with use of TIG – Tungsten Inert Gas surfacing by welding technology with filler on Ni matrix, Ni and Co matrix with wolfram carbides WC and on the basis on Fe-Cr-C alloy, which has the same chemical composition with alloy, which was used for making of composite surface layer. Usability for industrial applications of surface layers of castings were estimated by criterion of hardness and abrasive wear resistance of type metal-mineral.

  13. Defect prevention in silica thin films synthesized using AP-PECVD for flexible electronic encapsulation

    Science.gov (United States)

    Elam, Fiona M.; Starostin, Sergey A.; Meshkova, Anna S.; van der Velden-Schuermans, Bernadette C. A. M.; van de Sanden, Mauritius C. M.; de Vries, Hindrik W.

    2017-06-01

    Industrially and commercially relevant roll-to-roll atmospheric pressure-plasma enhanced chemical vapour deposition was used to synthesize smooth, 80 nm silica-like bilayer thin films comprising a dense ‘barrier layer’ and comparatively porous ‘buffer layer’ onto a flexible polyethylene 2,6 naphthalate substrate. For both layers, tetraethyl orthosilicate was used as the precursor gas, together with a mixture of nitrogen, oxygen and argon. The bilayer films demonstrated exceptionally low effective water vapour transmission rates in the region of 6.1  ×  10-4 g m-2 d-1 (at 40 °C, 90% relative humidity), thus capable of protecting flexible photovoltaics and thin film transistors from degradation caused by oxygen and water. The presence of the buffer layer within the bilayer architecture was mandatory in order to achieve the excellent encapsulation performance. Atomic force microscopy in addition to solvent permeation measurements, confirmed that the buffer layer prevented the formation of performance-limiting defects in the bilayer thin films, which likely occur as a result of excessive plasma-surface interactions during the deposition process. It emerged that the primary function of the buffer layer was therefore to act as a protective coating for the flexible polymer substrate material.

  14. Layering in Provenance Systems

    OpenAIRE

    Seltzer, Margo I.; Muniswamy-Reddy, Kiran-Kumar; Braun, Uri Jacob; Holland, David A.; Macko, Peter; Maclean, Diana; Margo, Daniel Wyatt; Smogor, Robin

    2009-01-01

    Digital provenance describes the ancestry or history of a digital object. Most existing provenance systems, however, operate at only one level of abstraction: the sys- tem call layer, a workflow specification, or the high-level constructs of a particular application. The provenance collectable in each of these layers is different, and all of it can be important. Single-layer systems fail to account for the different levels of abstraction at which users need to reason about their data and proc...

  15. Stable Boundary Layer Issues

    OpenAIRE

    Steeneveld, G.J.

    2012-01-01

    Understanding and prediction of the stable atmospheric boundary layer is a challenging task. Many physical processes are relevant in the stable boundary layer, i.e. turbulence, radiation, land surface coupling, orographic turbulent and gravity wave drag, and land surface heterogeneity. The development of robust stable boundary layer parameterizations for use in NWP and climate models is hampered by the multiplicity of processes and their unknown interactions. As a result, these models suffer ...

  16. Biomimetic nanocrystalline apatite coatings synthesized by Matrix Assisted Pulsed Laser Evaporation for medical applications

    Energy Technology Data Exchange (ETDEWEB)

    Visan, A. [National Institute for Lasers, Plasma, and Radiation Physics, 409 Atomistilor Street, RO-77125, MG-36, Magurele-Ilfov (Romania); Grossin, D. [CIRIMAT – Carnot Institute, University of Toulouse, ENSIACET, 4 Allée Emile Monso, 31030 Toulouse Cedex 4 (France); Stefan, N.; Duta, L.; Miroiu, F.M. [National Institute for Lasers, Plasma, and Radiation Physics, 409 Atomistilor Street, RO-77125, MG-36, Magurele-Ilfov (Romania); Stan, G.E. [National Institute of Materials Physics, RO-077125, Magurele-Ilfov (Romania); Sopronyi, M.; Luculescu, C. [National Institute for Lasers, Plasma, and Radiation Physics, 409 Atomistilor Street, RO-77125, MG-36, Magurele-Ilfov (Romania); Freche, M.; Marsan, O.; Charvilat, C. [CIRIMAT – Carnot Institute, University of Toulouse, ENSIACET, 4 Allée Emile Monso, 31030 Toulouse Cedex 4 (France); Ciuca, S. [Politehnica University of Bucharest, Faculty of Materials Science and Engineering, Bucharest (Romania); Mihailescu, I.N., E-mail: ion.mihailescu@inflpr.ro [National Institute for Lasers, Plasma, and Radiation Physics, 409 Atomistilor Street, RO-77125, MG-36, Magurele-Ilfov (Romania)

    2014-02-15

    Highlights: • We report the deposition by MAPLE of biomimetic apatite coatings on Ti substrates. • This is the first report of MAPLE deposition of hydrated biomimetic apatite films. • Biomimetic apatite powder was synthesized by double decomposition process. • Non-apatitic environments, of high surface reactivity, are preserved post-deposition. • We got the MAPLE complete transfer as thin film of a hydrated, delicate material. -- Abstract: We report the deposition by Matrix Assisted Pulsed Laser Evaporation (MAPLE) technique of biomimetic nanocrystalline apatite coatings on titanium substrates, with potential application in tissue engineering. The targets were prepared from metastable, nanometric, poorly crystalline apatite powders, analogous to mineral bone, synthesized through a biomimetic approach by double decomposition process. For the deposition of thin films, a KrF* excimer laser source was used (λ = 248 nm, τ{sub FWHM} ≤ 25 ns). The analyses revealed the existence, in synthesized powders, of labile non-apatitic mineral ions, associated with the formation of a hydrated layer at the surface of the nanocrystals. The thin film analyses showed that the structural and chemical nature of the nanocrystalline apatite was prevalently preserved. The perpetuation of the non-apatitic environments was also observed. The study indicated that MAPLE is a suitable technique for the congruent transfer of a delicate material, such as the biomimetic hydrated nanohydroxyapatite.

  17. Layered plasma polymer composite membranes

    Science.gov (United States)

    Babcock, Walter C.

    1994-01-01

    Layered plasma polymer composite fluid separation membranes are disclosed, which comprise alternating selective and permeable layers for a total of at least 2n layers, where n is .gtoreq.2 and is the number of selective layers.

  18. Electroless atomic layer deposition

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, David Bruce; Cappillino, Patrick J.; Sheridan, Leah B.; Stickney, John L.; Benson, David M.

    2017-10-31

    A method of electroless atomic layer deposition is described. The method electrolessly generates a layer of sacrificial material on a surface of a first material. The method adds doses of a solution of a second material to the substrate. The method performs a galvanic exchange reaction to oxidize away the layer of the sacrificial material and deposit a layer of the second material on the surface of the first material. The method can be repeated for a plurality of iterations in order to deposit a desired thickness of the second material on the surface of the first material.

  19. Perturbation Measurements on the Degree of Naturalness of Synthesized Vowels.

    Science.gov (United States)

    Yamasaki, Rosiane; Montagnoli, Arlindo; Murano, Emi Z; Gebrim, Eloisa; Hachiya, Adriana; Lopes da Silva, Jorge Vicente; Behlau, Mara; Tsuji, Domingos

    2017-05-01

    To determine the impact of jitter and shimmer on the degree of naturalness perception of synthesized vowels produced by acoustical simulation with glottal pulses (GP) and with solid model of the vocal tract (SMVT). Prospective study. Synthesized vowels were produced in three steps: 1. Eighty GP were developed (20 with jitter, 20 with shimmer, 20 with jitter+shimmer, 20 without perturbation); 2. A SMVT was produced based on magnetic resonance imaging (MRI) from a woman during phonation-/ε/ and using rapid prototyping technology; 3. Acoustic simulations were performed to obtain eighty synthesized vowels-/ε /. Two experiments were performed. First Experiment: three judges rated 120 vowels (20 humans+80 synthesized+20% repetition) as "human" or "synthesized". Second Experiment: twenty PowerPoint slide sequences were created. Each slide had 4 synthesized vowels produced with the four perturbation condition. Evaluators were asked to rate the vowels from the most natural to the most artificial. First Experiment: all the human vowels were classified as human; 27 out of eighty synthesized vowels were rated as human, 15 of those were produced with jitter+shimmer, 10 with jitter, 2 without perturbation and none with shimmer. Second Experiment: Vowels produced with jitter+shimmer were considered as the most natural. Vowels with shimmer and without perturbation were considered as the most artificial. The association of jitter and shimmer increased the degree of naturalness of synthesized vowels. Acoustic simulations performed with GP and using SMVT demonstrated a possible method to test the effect of the perturbation measurements on synthesized voices. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

  20. Low-Temperature Synthesis of Vertically Align ZnO Layer on ITO Glass: The Role of Seed Layer and Hydrothermal Process

    Science.gov (United States)

    Sholehah, Amalia; Achmad, NurSumiati; Dimyati, Arbi; Dwiyanti, Yanyan; Partuti, Tri

    2017-05-01

    ZnO thin layer has a broad potential application in optoelectronic devices. In the present study, vertically align ZnO layers on ITO glass were synthesized using wet chemical method. The seed layers were prepared using electrodeposition method at 3°C. After that, the growing process was carried out using chemical bath deposition (CBD) at 90°C. To improve the structural property of the ZnO layers, hydrothermal technique was used subsequently. Results showed that seeding layer has a great influence on the physical properties of the ZnO layers. Moreover, hydrothermal process conducted after the ZnO growth can enhance the morphological property of the layers. From the experiments, it is found that the ZnO layers has diameter of ∼60 nm with increasing thickness from ∼0.8 to 1.2 μm and band-gap energies of ∼3.2 eV.

  1. Synthesis of fly-ash cenospheres coated with polypyrrole using a layer-by-layer method

    Science.gov (United States)

    Li, Qin; Wang, Bing; Li, Chuang; Pang, Jianfeng; Zhai, Jianping

    2011-11-01

    Uniform polypyrrole (PPy) films, of controlled thickness, were successfully synthesized and immobilized on polyelectrolyte (PE) multilayer-assembled fly-ash cenospheres (FACs) using a simple and versatile method. In this approach, FACs were assembled with multilayers of poly(diallyldimethylammonium chloride) (PDDA) and poly(sodium 4-styrenesulfonate) (PSS) using a layer-by-layer self-assembly procedure. The FACs were used as templates for the subsequent deposition of PPy. The deposition behaviours of PEs on the surfaces of the FACs were examined, and the results could be fitted to a first-order exponential decay model at pH 6. The surfaces of the PE-deposited FACs (FAC-(PDDA-PSS)n, n is the number of PE layers) became more homogeneous as n increased. Their properties were determined mainly by the PE, not by the FAC itself, after n = 4. PPy-coated FACs with PE precursor layers [(PPy/FAC-(PDDA-PSS)n] had different morphologies for different numbers of PE layers. The PPy loading amount on the FACs and the conductivities of the composites reached plateaus after the PE layer deposition number exceeded six.

  2. Multiple density layered insulator

    Science.gov (United States)

    Alger, Terry W.

    1994-01-01

    A multiple density layered insulator for use with a laser is disclosed wh provides at least two different insulation materials for a laser discharge tube, where the two insulation materials have different thermoconductivities. The multiple layer insulation materials provide for improved thermoconductivity capability for improved laser operation.

  3. Stable Boundary Layer Issues

    NARCIS (Netherlands)

    Steeneveld, G.J.

    2012-01-01

    Understanding and prediction of the stable atmospheric boundary layer is a challenging task. Many physical processes are relevant in the stable boundary layer, i.e. turbulence, radiation, land surface coupling, orographic turbulent and gravity wave drag, and land surface heterogeneity. The

  4. Microstructures and properties of Cr-Cu/W-Cu bi-layer composite coatings prepared by mechanical alloying

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Jiaping; Feng, Xiaomei; Shen, Yifu; Chen, Cheng; Duan, Cuiyuan [Nanjing Univ. of Aeronautics and Astronautics (China). Dept. of Materials Science and Technology

    2016-06-15

    Cr-Cu/W-Cu bi-layer coatings with composite structures were fabricated by means of mechanical alloying. The Cr-Cu layer and the W-Cu layer were deposited successively and the as-synthesized bi-layer coating was made up of an inner Cr-Cu layer and an outer W-Cu layer. Microstructures, chemical and phase compositions of the as-prepared coatings were characterized. The results indicated that the bonding between the inner coating and the substrate was improved with the increase of Cu in the raw powder. The annealing treatment of the inner Cr-Cu layer was beneficial to the bonding between the inner Cr-Cu coating and the outer W-Cu coating layer. Mechanical properties such as microhardness, friction and wear resistance were tested. The as-synthesized coating could effectively improve the hardness and wear resistance of the Cu substrate.

  5. Synthesizing genetic sequential logic circuit with clock pulse generator

    National Research Council Canada - National Science Library

    Chuang, Chia-Hua; Lin, Chun-Liang

    2014-01-01

    .... This paper presents a genetic sequential logic circuit with a clock pulse generator based on a synthesized genetic oscillator, which generates a consecutive clock signal whose frequency is an inverse...

  6. Protein immobilization onto electrochemically synthesized CoFe nanowires

    National Research Council Canada - National Science Library

    Torati, Sri Ramulu; Reddy, Venu; Yoon, Seok Soo; Kim, CheolGi

    2015-01-01

    CoFe nanowires have been synthesized by the electrodeposition technique into the pores of a polycarbonate membrane with a nominal pore diameter of 50 nm, and the composition of CoFe nanowires varying...

  7. GaN Nanowires Synthesized by Electroless Etching Method

    KAUST Repository

    Najar, Adel

    2012-01-01

    Ultra-long Gallium Nitride Nanowires is synthesized via metal-electroless etching method. The morphologies and optical properties of GaN NWs show a single crystal GaN with hexagonal Wurtzite structure and high luminescence properties.

  8. In vitro Activity and Safety Assessment of New Synthesized Thiazolo ...

    African Journals Online (AJOL)

    In vitro Activity and Safety Assessment of New Synthesized Thiazolo Pyrimidine Derivatives Augmented with Albendazole against Echinococcus Multilocularis Metacestodes in Balb/C Mice. SA Bahashwan, AE Alharbi, MA Ramadan, AA Fayed, AA Bahashwan ...

  9. Synthesized 2-Substituted-3-Phenylthiazolidine-4-ones as Potent ...

    African Journals Online (AJOL)

    carboxaldehydes to form thiazolidine-4-ones and determine the antioxidant and antidiabetic activity of the synthesized compounds. Methods: The Schiff bases were obtained upon reaction between the electrophillic carbon atom of ...

  10. A new antibiotic, fumaramidmycin. II. Isolation, structure and syntheses

    National Research Council Canada - National Science Library

    SUHARA, YASUJI; MARUYAMA, HIROMI B; KOTOH, YOSHIAKI; MIYASAKA, YUMIKO; YOKOSE, KAZUTERU; SHIRAI, HARUYOSHI; TAKANO, KOUICHI

    1975-01-01

    .... The structure was shown to be N-(phenylacetyl) fumaramide. Starting from fumaramic acid, fumaramidmycin has been synthesized in good yield, in which the key stage involves N-acylated imino ether formation followed by mild acid hydrolysis...

  11. Improved electron transport layer

    DEFF Research Database (Denmark)

    2012-01-01

    The present invention provides: a method of preparing a coating ink for forming a zinc oxide electron transport layer, comprising mixing zinc acetate and a wetting agent in water or methanol; a coating ink comprising zinc acetate and a wetting agent in aqueous solution or methanolic solution......; a method of preparing a zinc oxide electron transporting layer, which method comprises: i) coating a substrate with the coating ink of the present invention to form a film; ii) drying the film; and iii) heating the dry film to convert the zinc acetate substantially to ZnO; a method of preparing an organic...... photovoltaic device or an organic LED having a zinc oxide electron transport layer, the method comprising, in this order: a) providing a substrate bearing a first electrode layer; b) forming an electron transport layer according to the following method: i) coating a coating ink comprising an ink according...

  12. Mayenite Synthesized Using the Citrate Sol-Gel Method

    Energy Technology Data Exchange (ETDEWEB)

    Ude, Sabina N [ORNL; Rawn, Claudia J [ORNL; Meisner, Roberta A [University of Tennessee (UTK) and Oak Ridge National Laboratory (ORNL); Kirkham, Melanie J [ORNL; Jones, Gregory L. [University of Tennessee, Knoxville (UTK); Payzant, E Andrew [ORNL

    2014-01-01

    A citrate sol-gel method has been used to synthesize mayenite (Ca12Al14O33). X-ray powder diffraction data show that the samples synthesized using the citrate sol-gel method contained CaAl2O4 and CaCO3 along with mayenite when fired ex-situ in air at 800 C but were single phase when fired at 900 C and above. Using high temperature x-ray diffraction, data collected in-situ in air at temperatures of 600 C and below showed only amorphous content; however, data collected at higher temperatures indicated the first phase to crystallize is CaCO3. High temperature x-ray diffraction data collected in 4% H2/96% N2 does not show the presence of CaCO3, and Ca12Al14O33 starts to form around 850 C. In comparison, x-ray powder diffraction data collected ex-situ on samples synthesized using traditional solid-state synthesis shows that single phase was not reached until samples were fired at 1350 C. DTA/TGA data collected either in a nitrogen environment or air on samples synthesized using the citrate gel method suggest the complete decomposition of metastable phases and the formation of mayenite at 900 C, although the phase evolution is very different depending on the environment. Brunauer-Emmett-Teller (BET) measurements showed a slightly higher surface area of 7.4 0.1 m2/g in the citrate gel synthesized samples compared to solid-state synthesized sample with a surface area of 1.61 0.02 m2/g. SEM images show a larger particle size for samples synthesized using the solid-state method compared to those synthesized using the citrate gel method.

  13. Three novel oligosaccharides synthesized using Thermoanaerobacter brockii kojibiose phosphorylase

    OpenAIRE

    Nishimoto Tomoyuki; Benkeblia Noureddine; Onodera Shuichi; Fukushi Eri; Takahashi Natsuko; Kawabata Jun; Shiomi Norio

    2007-01-01

    Abstract Background Recently synthesized novel oligosaccharides have been produced primarily by hydrolases and glycosyltransferases, while phosphorylases have also been subject of few studies. Indeed, phosphorylases are expected to give good results via their reversible reaction. The purpose of this study was to synthesis other novel oligosaccharides using kojibiose phosphorylase. Results Three novel oligosaccharides were synthesized by glucosyltransfer from β-D-glucose 1-phosphate (β-D-G1P) ...

  14. Engineering 1D Quantum Stripes from Superlattices of 2D Layered Materials

    Energy Technology Data Exchange (ETDEWEB)

    Gruenewald, John H.; Kim, Jungho; Kim, Heung Sik; Johnson, Jared M.; Hwang, Jinwoo; Souri, Maryam; Terzic, Jasminka; Chang, Seo Hyoung; Said, Ayman; Brill, Joseph W.; Cao, Gang; Kee, Hae-young; Seo, Sung S. Ambrose

    2017-01-04

    Dimensional tunability from two dimensions to one dimension is demonstrated for the first time using an artificial superlattice method in synthesizing 1D stripes from 2D layered materials. The 1D confinement of layered Sr2IrO4 induces distinct 1D quantum-confined electronic states, as observed from optical spectroscopy and resonant inelastic X-ray scattering. This 1D superlattice approach is generalizable to a wide range of layered materials.

  15. Surface passivation of GaAs nanowires by the atomic layer deposition of AlN

    Energy Technology Data Exchange (ETDEWEB)

    Shtrom, I. V., E-mail: igorstrohm@mail.ru; Bouravleuv, A. D. [Russian Academy of Sciences, Ioffe Physical–Technical Institute (Russian Federation); Samsonenko, Yu. B.; Khrebtov, A. I. [Russian Academy of Sciences, St. Petersburg National Research Academic University—Nanotechnology Research and Education Center (Russian Federation); Soshnikov, I. P. [Russian Academy of Sciences, Ioffe Physical–Technical Institute (Russian Federation); Reznik, R. R.; Cirlin, G. E., E-mail: cirlin@beam.ioffe.ru [Russian Academy of Sciences, St. Petersburg National Research Academic University—Nanotechnology Research and Education Center (Russian Federation); Dhaka, V.; Perros, A.; Lipsanen, H. [Aalto University (Finland)

    2016-12-15

    It is shown that the atomic layer deposition of thin AlN layers can be used to passivate the surface states of GaAs nanowires synthesized by molecular-beam epitaxy. Studies of the optical properties of samples by low-temperature photoluminescence measurements shows that the photoluminescence-signal intensity can be increased by a factor of up to five by passivating the nanowires with a 25-Å-thick AlN layer.

  16. Thermal Decomposition Studies of Layered Metal Hydroxynitrates (Metal: Cu, Zn, Cu/Co, and Zn/Co)

    National Research Council Canada - National Science Library

    Ramesh, Thimmasandra Narayan; Madhu, Theeta Lakshamaiah

    2015-01-01

    ...) were synthesized by hydrolysis of urea and metal nitrates at 140°C. Layered metal hydroxyl nitrates derive their structure from brucite mineral and generally crystallize in hexagonal and monoclinic phases...

  17. Mn DOPING OF GaN LAYERS GROWN BY MOVPE

    Directory of Open Access Journals (Sweden)

    Petr Šimek

    2012-07-01

    Full Text Available In this contribution we present a growth of Ga1-xMnxN layers by MOVPE. Mn doped GaN layers were grown with and without undoped GaN templates on (0001 sapphire substrates in a quartz horizontal reactor. For the deposition of Ga1-xMnxN layers (MCp2Mn was used as a Mn – precursor. The flow of the Mn precursor was 0.2-3.2 μmol.min-1. The deposition of Ga1-xMnxN layers was carried out under the pressure of 200 mbar, the temperature 1050 °C and the V/III ratio of 1360. For the growth of high quality GaN:Mn layers it was necessary to grow these layers on a minimally partially coalesced layer of pure GaN. The direct deposition of GaN:Mn layer on the low temperature GaN buffer layer led to a three-dimensional growth during the whole deposition process. Another investigated parameter was the influence of nitrogen on the layer’s properties. A nearly constant ferromagnetic moment persisting up to room temperature was observed on the synthesized thin films.

  18. The Equatorial Ekman Layer

    CERN Document Server

    Marcotte, Florence; Soward, Andrew

    2016-01-01

    The steady incompressible viscous flow in the wide gap between spheres rotating about a common axis at slightly different rates (small Ekman number E) has a long and celebrated history. The problem is relevant to the dynamics of geophysical and planetary core flows, for which, in the case of electrically conducting fluids, the possible operation of a dynamo is of considerable interest. A comprehensive asymptotic study, in the limit E<<1, was undertaken by Stewartson (J. Fluid Mech. 1966, vol. 26, pp. 131-144). The mainstream flow, exterior to the E^{1/2} Ekman layers on the inner/outer boundaries and the shear layer on the inner sphere tangent cylinder C, is geostrophic. Stewartson identified a complicated nested layer structure on C, which comprises relatively thick quasi-geostrophic E^{2/7} (inside C) and E^{1/4} (outside C) layers. They embed a thinner E^{1/3} ageostrophic shear layer (on C), which merges with the inner sphere Ekman layer to form the E^{2/5} Equatorial Ekman layer of axial length E^{...

  19. Magnet-induced temporary superhydrophobic coatings from one-pot synthesized hydrophobic magnetic nanoparticles.

    Science.gov (United States)

    Fang, Jian; Wang, Hongxia; Xue, Yuhua; Wang, Xungai; Lin, Tong

    2010-05-01

    In this paper, we report on the production of superhydrophobic coatings on various substrates (e.g., glass slide, silicon wafer, aluminum foil, plastic film, nanofiber mat, textile fabrics) using hydrophobic magnetic nanoparticles and a magnet-assembly technique. Fe(3)O(4) magnetic nanoparticles functionalized with a thin layer of fluoroalkyl silica on the surface were synthesized by one-step coprecipitation of Fe(2+)/Fe(3+) under an alkaline condition in the presence of a fluorinated alkyl silane. Under a magnetic field, the magnetic nanoparticles can be easily deposited on any solid substrate to form a thin superhydrophobic coating with water contact angle as high as 172 degrees , and the surface superhydrophobicity showed very little dependence on the substrate type. The particulate coating showed reasonable durability because of strong aggregation effect of nanoparticles, but the coating layer can be removed (e.g., by ultrasonication) to restore the original surface feature of the substrates. By comparison, the thin particle layer deposited under no magnetic field showed much lower hydrophobicity. The main reason for magnet-induced superhydrophobic surfaces is the formation of nano- and microstructured surface features. Such a magnet-induced temporary superhydrophobic coating may have wide applications in electronic, biomedical, and defense-related areas.

  20. Method of synthesizing small-diameter carbon nanotubes with electron field emission properties

    Science.gov (United States)

    Liu, Jie (Inventor); Du, Chunsheng (Inventor); Qian, Cheng (Inventor); Gao, Bo (Inventor); Qiu, Qi (Inventor); Zhou, Otto Z. (Inventor)

    2009-01-01

    Carbon nanotube material having an outer diameter less than 10 nm and a number of walls less than ten are disclosed. Also disclosed are an electron field emission device including a substrate, an optionally layer of adhesion-promoting layer, and a layer of electron field emission material. The electron field emission material includes a carbon nanotube having a number of concentric graphene shells per tube of from two to ten, an outer diameter from 2 to 8 nm, and a nanotube length greater than 0.1 microns. One method to fabricate carbon nanotubes includes the steps of (a) producing a catalyst containing Fe and Mo supported on MgO powder, (b) using a mixture of hydrogen and carbon containing gas as precursors, and (c) heating the catalyst to a temperature above 950.degree. C. to produce a carbon nanotube. Another method of fabricating an electron field emission cathode includes the steps of (a) synthesizing electron field emission materials containing carbon nanotubes with a number of concentric graphene shells per tube from two to ten, an outer diameter of from 2 to 8 nm, and a length greater than 0.1 microns, (b) dispersing the electron field emission material in a suitable solvent, (c) depositing the electron field emission materials onto a substrate, and (d) annealing the substrate.

  1. Layered Fault Management Architecture

    National Research Council Canada - National Science Library

    Sztipanovits, Janos

    2004-01-01

    ... UAVs or Organic Air Vehicles. The approach of this effort was to analyze fault management requirements of formation flight for fleets of UAVs, and develop a layered fault management architecture which demonstrates significant...

  2. The Bottom Boundary Layer.

    Science.gov (United States)

    Trowbridge, John H; Lentz, Steven J

    2018-01-03

    The oceanic bottom boundary layer extracts energy and momentum from the overlying flow, mediates the fate of near-bottom substances, and generates bedforms that retard the flow and affect benthic processes. The bottom boundary layer is forced by winds, waves, tides, and buoyancy and is influenced by surface waves, internal waves, and stratification by heat, salt, and suspended sediments. This review focuses on the coastal ocean. The main points are that (a) classical turbulence concepts and modern turbulence parameterizations provide accurate representations of the structure and turbulent fluxes under conditions in which the underlying assumptions hold, (b) modern sensors and analyses enable high-quality direct or near-direct measurements of the turbulent fluxes and dissipation rates, and (c) the remaining challenges include the interaction of waves and currents with the erodible seabed, the impact of layer-scale two- and three-dimensional instabilities, and the role of the bottom boundary layer in shelf-slope exchange.

  3. Layered circle packings

    Directory of Open Access Journals (Sweden)

    David Dennis

    2005-01-01

    Full Text Available Given a bounded sequence of integers {d0,d1,d2,…}, 6≤dn≤M, there is an associated abstract triangulation created by building up layers of vertices so that vertices on the nth layer have degree dn. This triangulation can be realized via a circle packing which fills either the Euclidean or the hyperbolic plane. We give necessary and sufficient conditions to determine the type of the packing given the defining sequence {dn}.

  4. The Role of Ambient Gas and Pressure on the Structuring of Hard Diamond-Like Carbon Films Synthesized by Pulsed Laser Deposition

    Directory of Open Access Journals (Sweden)

    Andrei C. Popescu

    2015-06-01

    Full Text Available Hard carbon thin films were synthesized on Si (100 and quartz substrates by the Pulsed Laser Deposition (PLD technique in vacuum or methane ambient to study their suitability for applications requiring high mechanical resistance. The deposited films’ surface morphology was investigated by scanning electron microscopy, crystalline status by X-ray diffraction, packing and density by X-ray reflectivity, chemical bonding by Raman and X-ray photoelectron spectroscopy, adherence by “pull-out” measurements and mechanical properties by nanoindentation tests. Films synthesized in vacuum were a-C DLC type, while films synthesized in methane were categorized as a-C:H. The majority of PLD films consisted of two layers: one low density layer towards the surface and a higher density layer in contact with the substrate. The deposition gas pressure played a crucial role on films thickness, component layers thickness ratio, structure and mechanical properties. The films were smooth, amorphous and composed of a mixture of sp3-sp2 carbon, with sp3 content ranging between 50% and 90%. The thickness and density of the two constituent layers of a film directly determined its mechanical properties.

  5. Evaluation of Controlled-Release Property and Phytotoxicity Effect of Insect Pheromone Zinc-Layered Hydroxide Nanohybrid Intercalated with Hexenoic Acid.

    Science.gov (United States)

    Ahmad, Rozita; Hussein, Mohd Zobir; Kadir, Wan Rasidah Wan Abdul; Sarijo, Siti Halimah; Hin, Taufiq-Yap Yun

    2015-12-30

    A controlled release formulation for the insect pheromone hexenoic acid (HE) was successfully developed using zinc-layered hydroxide (ZLH) as host material through a simple coprecipitation technique, resulting in the formation of inorganic-organic nanolayered material with sustained release properties. The release of HE from its nanohybrid was found to occur in a controlled manner, governed by a pseudo-second order kinetics model. The maximum amount of HE released from the nanocomposite into solutions at pH 4, 6.5, and 8 was found to be 84, 73, and 83% for 1100 min, respectively. The hexenoate zinc-layered hydroxide nanomaterial (HEN) was found to be nontoxic for plants when green beans and wheat seeds were successfully germinated in all HEN concentrations tested in the experiment, with higher percentage of seed germination and higher radical seed growth as compared to its counter anion, HE. ZLH can be a promising carrier for insect pheromone toward a new generation of environmentally safe pesticide nanomaterial for crop protection.

  6. Using SyGuS to Synthesize Reactive Motion Plans

    Directory of Open Access Journals (Sweden)

    Sarah Chasins

    2016-11-01

    Full Text Available We present an approach for synthesizing reactive robot motion plans, based on compilation to Syntax-Guided Synthesis (SyGuS specifications. Our method reduces the motion planning problem to the problem of synthesizing a function that can choose the next robot action in response to the current state of the system. This technique offers reactivity not by generating new motion plans throughout deployment, but by synthesizing a single program that causes the robot to reach its target from any system state that is consistent with the system model. This approach allows our tool to handle environments with adversarial obstacles. This work represents the first use of the SyGuS formalism to solve robot motion planning problems. We investigate whether using SyGuS for a bounded two-player reachability game is practical at this point in time.

  7. Microwave-Synthesized Tin Oxide Nanocrystals for Low-Temperature Solution-Processed Planar Junction Organo-Halide Perovskite Solar Cells

    KAUST Repository

    Abulikemu, Mutalifu

    2017-03-25

    Tin oxide has been demonstrate to possess outstanding optoelectronic properties such as optical transparency and high electron mobility, therefore, it was successfully utilized as electron transporting layer in various kind of solar cells. In this study, for the first time, highly dispersible SnO2 nanoparticles were synthesized by microwave-assisted non-aqueous sol-gel route in an organic medium. Ethanol dispersion of the as-prepared nanoparticles was used to cast an uniform thin layer of SnO2 without the aid of aggregating agent and at low temperatures. Organohalide perovskite solar cells were fabricated using SnO2 as electron transporting layer. Morphological and spectroscopic investigations, in addition to the good photoconversion efficiency obtained evidenced that nanoparticles synthesized by this route have optimal properties such small size and crystallinity to form a continuous film, furthermore, this method allows high reproducibility and scalability of the film deposition process.

  8. Bottom-Up Syntheses and Characterization of One Dimensional Nanomaterials

    Science.gov (United States)

    Yeh, Yao-Wen

    Nanomaterials, materials having at least one dimension below 100 nm, have been creating exciting opportunities for fundamental quantum confinement studies and applications in electronic devices and energy technologies. One obvious and important aspect of nanomaterials is their production. Although nanostructures can be obtained by top-down reductive e-beam lithography and focused ion beam processes, further development of these processes is needed before these techniques can become practical routes to large scale production. On the other hand, bottom-up syntheses, with advantages in material diversity, throughput, and the potential for large volume production, may provide an alternative strategy for creating nanostructures. In this work, we explore syntheses of one dimensional nanostructures based on hydrothermal and arc discharge methods. The first project presented in this thesis involves syntheses of technologically important nanomaterials and their potential application in energy harvesting. In particular, it was demonstrated that single crystal ferroelectric lead magnesium niobate lead titanate (PMN-PT) nanowires can be synthesized by a hydrothermal route. The chemical composition of the synthesized nanowires is near the rhombohedral-monoclinic boundary of PMN-PT, which leads to a high piezoelectric coefficient of 381 pm/V. Finally, the potential use of PMN-PT nanowires in energy harvesting applications was also demonstrated. The second part of this thesis involves the synthesis of carbon and boron nitride nanotubes by dc arc discharges. In particular, we investigated how local plasma related properties affected the synthesis of carbon nanostructures. Finally, we investigated the anodic nature of the arc and how a dc arc discharge can be applied to synthesize boron nitride nanotubes.

  9. On the optimization of asymmetric barrier layers in InAlGaAs/AlGaAs laser heterostructures on GaAs substrates

    DEFF Research Database (Denmark)

    Zhukov, A. E.; Asryan, L. V.; Semenova, Elizaveta

    2015-01-01

    Band offsets at the heterointerface are calculated for various combinations of InAlGaAs/AlGaAs heteropairs that can be synthesized on GaAs substrates in the layer-by-layer pseudomorphic growth mode. Patterns which make it possible to obtain an asymmetric barrier layer providing the almost...

  10. Chemical phase analysis of seed mediated synthesized anisotropic silver nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Bharti, Amardeep, E-mail: abharti@pu.ac.in; Goyal, Navdeep [Department of Physics, Panjab University, Chandigarh, INDIA-160014 (India); Singh, Suman; Singla, M. L. [Agrionics, Central Scientific Instruments Organization, CSIR, Chandigarh, INDIA-160030 (India)

    2015-08-28

    Noble-metal nanoparticles are of great interest because of its broad applications almost in every stream (i.e. biology, chemistry and engineering) due to their unique size/shape dependant properties. In this paper, chemical phase of seed mediated synthesized anisotropic silver nanoparticle (AgNPs) has been investigated via fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). These nanaoparticles were synthesized by seed-growth method controlled by urea and dextrose results to highly stable 12-20 nm particle size revealed by zeta potential and transmission electron microscopy (TEM)

  11. It Takes Two to Tango-Double-Layer Selective Contacts in Perovskite Solar Cells for Improved Device Performance and Reduced Hysteresis.

    Science.gov (United States)

    Kegelmann, Lukas; Wolff, Christian M; Awino, Celline; Lang, Felix; Unger, Eva L; Korte, Lars; Dittrich, Thomas; Neher, Dieter; Rech, Bernd; Albrecht, Steve

    2017-05-24

    Solar cells made from inorganic-organic perovskites have gradually approached market requirements as their efficiency and stability have improved tremendously in recent years. Planar low-temperature processed perovskite solar cells are advantageous for possible large-scale production but are more prone to exhibiting photocurrent hysteresis, especially in the regular n-i-p structure. Here, a systematic characterization of different electron selective contacts with a variety of chemical and electrical properties in planar n-i-p devices processed below 180 °C is presented. The inorganic metal oxides TiO2 and SnO2, the organic fullerene derivatives C60, PCBM, and ICMA, as well as double-layers with a metal oxide/PCBM structure are used as electron transport materials (ETMs). Perovskite layers deposited atop the different ETMs with the herein applied fabrication method show a similar morphology according to scanning electron microscopy. Further, surface photovoltage spectroscopy measurements indicate comparable perovskite absorber qualities on all ETMs, except TiO2, which shows a more prominent influence of defect states. Transient photoluminescence studies together with current-voltage scans over a broad range of scan speeds reveal faster charge extraction, less pronounced hysteresis effects, and higher efficiencies for devices with fullerene compared to those with metal oxide ETMs. Beyond this, only double-layer ETM structures substantially diminish hysteresis effects for all performed scan speeds and strongly enhance the power conversion efficiency up to a champion stabilized value of 18.0%. The results indicate reduced recombination losses for a double-layer TiO2/PCBM contact design: First, a reduction of shunt paths through the fullerene to the ITO layer. Second, an improved hole blocking by the wide band gap metal oxide. Third, decreased transport losses due to an energetically more favorable contact, as implied by photoelectron spectroscopy measurements. The

  12. Preparation and photocatalytic activity of the layered titanates

    Directory of Open Access Journals (Sweden)

    Marija Milanović

    2010-06-01

    Full Text Available Titanate structures were synthesized in highly alkaline solution using hydrothermal procedure. As-preparedpowders were characterized by X-ray diffraction (XRD, Fourier transform infrared spectroscopy (FT-IRand transmission electron microscopy (TEM. A specific surface area of the powders was measured by BETmethod. Results confirmed formation of layered trititanates, already after one hour of hydrothermal synthesis.To examine the photocatalytic activity of the as-prepared layered titanates, methylene blue (MB was employedas a target compound in response to visible light at ambient temperature. It was observed that the specificsurface area, size distribution and crystallinity are important factors to get high photocatalytic activity for thedecomposition of MB.

  13. Synthesis and carbon dioxide sorption of layered double hydroxide/silica foam nanocomposites with hierarchical mesostructure

    KAUST Repository

    Fu, Liling

    2014-03-05

    Layered double hydroxides (LDHs) with a hierarchical mesostructure are successfully synthesized on mesoporous silica foams by simple impregnation and hydrothermal treatment. The as-synthesized LDH/silica foam nanocomposites show well-defined mesostructures with high surface areas, large pore volumes, and mesopores of 6-7 nm. The nanocomposites act as carbon dioxide (CO2) sorbents under simulated flue gas conditions. They also exhibit significantly enhanced CO2 capacities under high-pressure conditions and high CO2/N2 and CO2/CH4 selectivities. Respect the hierarchy: Hierarchical mesoporous layered double hydroxide (LDH) nanocomposites with high surface areas and large pore volumes are synthesized by controlled hydrothermal growth of LDH precursors on a mesoporous silica foam. The as-synthesized nanocomposites exhibit a significantly enhanced capacity and selectivity towards carbon dioxide, making them very promising candidates for carbon dioxide (CO2) separation applications. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Blue photoluminescence of sponge-like highly porous alumina synthesized in hydrofluoric acid based electrolytes

    Science.gov (United States)

    Ilin, D. O.; Vokhmintsev, A. S.; Martemyanov, N. A.; Weinstein, I. A.

    2017-11-01

    For the first time nanostructures of anodized aluminum oxide (AAO) were synthesized using hydrofluoric acid based electrolytes under potentiostatic mode with varied oxidation conditions. As-grown oxide layers were amorphous and had sponge-like disordered structure with ramified pores system of 50 to 300 nm diameters. All samples under daylight demonstrated blue emission with power up to 10 μW that was seen by naked eye. It was shown that integral intensity of photoluminescence (PL) emission band in 350 – 650 range increases up to 7 – 60 times depending on synthesis details. Observed PL spectra were approximated by superposition of two components with Emax = 2.74 and 2.44 eV, FWHM = 0.63 and 0.53 eV. It was substantiated that studied emission have intrinsic origin and can be attributed to F2 2+ - and F2-centers.

  15. Laminin, a noncollagenous component of epithelial basement membranes synthesized by a rat yolk sac tumor

    DEFF Research Database (Denmark)

    Wewer, U; Albrechtsen, R; Ruoslahti, E

    1981-01-01

    Laminin, a glycoprotein antigenically similar or identical to a component of epithelial basement membranes, was identified as a major component of the abundant extracellular matrix synthesized by an experimentally induced rat yolk sac tumor. Immunocytochemical staining revealed laminin in cultured...... polypeptides with molecular weights of approximately 200,000 and 400,000. These comigrated with the polypeptides of mouse laminin isolated previously. The yolk sac tumor tissue grown in vivo contained laminin in the tumor cells and in the extracellular material as evidenced by immunofluorescence...... membranes in rat tissues in a manner indistinguishable from antilaminin. The presence of laminin in rat yolk sac cells, the presumed origin of our yolk sac tumor, was studied in some detail. Laminin was found to be present in normal cells of the visceral as well as the parietal yolk sac layer...

  16. A template-free CVD route to synthesize hierarchical porous ZnO films

    Science.gov (United States)

    Duan, Xiangyang; Chen, Guangde; Guo, Lu'an; Zhu, Youzhang; Ye, Honggang; Wu, Yelong

    2015-12-01

    Unique porous ZnO films were successfully synthesized on Si substrates without any catalysts or templates using chemical vapor deposition method. Unlike earlier reports, they are hierarchical porous, containing both macropores and mesopores. The zinc oxide seed layer and the weight ratio of source materials were found to be the major factors that would facilitate the synthesis of these hierarchical porous films. We found that all the macropores were surrounded by grain boundaries. As presented in the SEM images, the newborn ZnO atoms would prefer to adsorb nearby the grain boundaries and nucleate there in the growth stage. A schematic diagram based on the aforesaid phenomenon was proposed to explain the synthesis of the hierarchical porous ZnO film. An unusual strong emission peak located at 420 nm was observed in the photoluminescence spectrum. It was suggested that the emission peak was attributed to the special hierarchical porous structure, especially the grain boundaries in the nanowalls of these films.

  17. Treatment of Egyptian Maghara coal by plasma ozone synthesized by silent discharge

    CERN Document Server

    Salem, M A; Garamoon, A A; Hassouba, M A

    2003-01-01

    A sample of pyrite rich bituminous coal collected from the main coal seam of Maghara mine, northern sinai, was treated by ozone plasma. The latter was synthesized using silent discharge method (10 kv a.c. and 50 hz). The room temperature Moessbauer spectra of untreated coal sample was easily fitted to two doublet, whose parameters matched those of pyrite (FeS sub 2) and sulfate (FeSO sub 4.H sub 2 O) in addition to hematite. After treatment by ozone plasma, a doublet ascribed to pyrite was observed. The extent of pyrite oxidation to jarosite (Fe sub 2 (SO sub 4) sub 3. nH sub 2 O) was monitored by their relative spectral areas, the incomplete oxidation of pyrite may be attributed to the presence of calcium sulfate layer which acts a screen of ozone.

  18. Different dimensional coordination polymers with 4,4'-oxybis(benzoate): Syntheses, structures and properties

    Energy Technology Data Exchange (ETDEWEB)

    Lun, Huijie [Henan Key Laboratory of Polyoxometalate, Institute of Molecular and Crystal Engineering, College of Chemistry and Chemical Engineering, Henan University, Kaifeng, Henan, 475004 (China); Li, Yamin, E-mail: liyamin@henu.edu.cn [State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002 (China); Zhang, Xudong [State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002 (China); Yang, Jing-He; Xiao, Changyu [Henan Key Laboratory of Polyoxometalate, Institute of Molecular and Crystal Engineering, College of Chemistry and Chemical Engineering, Henan University, Kaifeng, Henan, 475004 (China); Xu, Yanqing [School of Chemistry, Key Laboratory of Cluster Science, Ministry of Education of China, Beijing Institute of Technology, Beijing 100081 (China); Li, Junrui [Henan Key Laboratory of Polyoxometalate, Institute of Molecular and Crystal Engineering, College of Chemistry and Chemical Engineering, Henan University, Kaifeng, Henan, 475004 (China)

    2014-07-01

    Five transition-metal coordination polymers, namely, [Zn{sub 7}Cl{sub 6}(oba){sub 4}]{sub n} (1), [Cd{sub 7}Cl{sub 6}(oba){sub 4}]{sub n} (2), [Zn(oba)(H{sub 2}O)]{sub n} (3), [Ag{sub 2}(oba)]{sub n} (4) and [Co(oba)(H{sub 2}O){sub 2}]{sub n} (5) (H{sub 2}oba=4,4′-oxydibenzoic acid), have been achieved under hydrothermal conditions and structurally characterized by IR, elemental analyses, X-ray single-crystal diffraction and TGA. The X-ray single-crystal diffraction reveals that compounds 1 and 2 are isomorphism, featuring pillared-layer 3D motifs, in which the 2D inorganic layers (Zn{sub 6}Cl{sub 7}){sub n} (or (Cd{sub 6}Cl{sub 7}){sub n}) are connected by oba{sup 2−} pillars. Compound 3 exhibits 1D stair-like chain and extends to a 3D network by two different interchain O–H–O hydrogen bonding interactions while compound 4 features wave chains and stretches to 2D layer by interchain Ag–O weak contacts. Compound 5 shows 2D network in which Co-chains are pillared by oba{sup 2−} ligand and then forms a 3D network by four different O–H–O hydrogen bonding interactions. Furthermore, 1–4 exhibit luminescent properties at a solid state and 5 shows antiferromagnetic behavior. - Graphical abstract: Five new transition-metal coordination complexes 1–5 have been synthesized and characterized by single-crystal X-ray diffractions, IR spectra, elemental analyses, thermogravimetric analyses (TGA), photoluminescent spectra and magnetic measurement. - Highlights: • Compound 1 exhibits a pillared-layer 3D network. • The photoluminescent properties of 1–4 have been measured. • Compound 5 exhibits antiferromagnetic behavior.

  19. Nanofilms of hyaluronan/chitosan assembled layer-by-layer: An antibacterial surface for Xylella fastidiosa.

    Science.gov (United States)

    Hernández-Montelongo, Jacobo; Nascimento, Vicente F; Murillo, Duber; Taketa, Thiago B; Sahoo, Prasana; de Souza, Alessandra A; Beppu, Marisa M; Cotta, Monica A

    2016-01-20

    In this work, nanofilms of hyaluronan/chitosan (HA/CHI) assembled layer by layer were synthesized; their application as a potential antimicrobial material was demonstrated for the phytopathogen Xylella fastidiosa, a gram-negative bacterium, here used as a model. For the synthesis, the influence of pH and ionic strength of these natural polymer stem-solutions on final characteristics of the HA/CHI nanofilms was studied in detail. The antibacterial effect was evaluated using widefield fluorescence microscopy. These results were correlated with the chemical properties of the nanofilms, studied by FTIR and Raman spectroscopy, as well as with their morphology and surface properties characterized using SEM and AFM. The present findings can be extended to design and optimize HA/CHI nanofilms with enhanced antimicrobial behavior for other type of phytopathogenic gram-negative bacteria species, such as Xanthomonas citri, Xanthomas campestri and Ralstonia solanacearum. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Cyclodextrin-containing layer-by-layer films and microcapsules: Synthesis and applications

    Directory of Open Access Journals (Sweden)

    Uichi Akiba

    2017-07-01

    Full Text Available This article reviews the synthesis and applications of cyclodextrin (CD-containing layer-by-layer (LbL films and microcapsules. CD-containing LbL films and microcapsules have been synthesized through the electrostatic interactions between charged CDs and polyelectrolytes or the formation of host–guest complexes. In the former strategy, sulfonated and carboxylated CDs are often combined with oppositely charged polyelectrolytes. In contrast, in the latter strategy, CD-bearing polymers and guest-modified polymers are used as components of LbL assembly. Typical guest molecules include adamantane, ferrocene, and azobenzene derivatives. Electrochemical biosensors have been constructed by coating the surface of electrodes with CD-containing LbL films. In addition, CD-containing LbL assemblies are used as scaffolds for constructing drug delivery systems, in which hydrophobic, poorly soluble drugs are loaded on the film through host–guest complexation.

  1. Superfluid Boundary Layer.

    Science.gov (United States)

    Stagg, G W; Parker, N G; Barenghi, C F

    2017-03-31

    We model the superfluid flow of liquid helium over the rough surface of a wire (used to experimentally generate turbulence) profiled by atomic force microscopy. Numerical simulations of the Gross-Pitaevskii equation reveal that the sharpest features in the surface induce vortex nucleation both intrinsically (due to the raised local fluid velocity) and extrinsically (providing pinning sites to vortex lines aligned with the flow). Vortex interactions and reconnections contribute to form a dense turbulent layer of vortices with a nonclassical average velocity profile which continually sheds small vortex rings into the bulk. We characterize this layer for various imposed flows. As boundary layers conventionally arise from viscous forces, this result opens up new insight into the nature of superflows.

  2. Phosphorous and nitrogen dual heteroatom doped mesoporous carbon synthesized via microwave method for supercapacitor application

    Science.gov (United States)

    Nasini, Udaya B.; Bairi, Venu Gopal; Ramasahayam, Sunil Kumar; Bourdo, Shawn E.; Viswanathan, Tito; Shaikh, Ali U.

    2014-03-01

    Phosphorus (P) and nitrogen (N) dual heteroatom doped mesoporous carbon (PNDC) synthesized by microwave assisted carbonization of tannin cross-linked to melamine in the presence of polyphosphoric acid was evaluated electrochemically for supercapacitor application. Controlling the N content by varying the amount of tannin to melamine in the carbonization process produced varying nitrogen, phosphorus and oxygen functionalities along with different physical properties. Electrochemical characterization studies revealed that N content is responsible for pseudocapacitance and high surface area plays a vital role in improving the capacitative behavior by enhanced electric double layer formation. In 1.0 M H2SO4 and 6.0 M KOH, PNDC-2 showed a high specific capacitance of 271 F g-1 and 236 F g-1, respectively. XPS results demonstrate the presence of pyridinic-N, quaternary-N as well as quinone type oxygen functionalities, which accounts for redox reactions and likely play an important role in the transportation of electrons during the charge/discharge process. Thus, the microwave assisted synthesis of doped carbon can provide a novel method of synthesizing materials useful for the fabrication of cheap and high performance supercapacitors.

  3. TiO2/PCL hybrid materials synthesized via sol-gel technique for biomedical applications.

    Science.gov (United States)

    Catauro, M; Bollino, F; Papale, F; Marciano, S; Pacifico, S

    2015-02-01

    The aim of the present work has been the synthesis of organic/inorganic hybrid materials based on titanium dioxide and poly(ε-caprolactone) (PCL) to be used in the biomedical field. Several materials have been synthesized using sol-gel methods by adding different amounts of polymer to the inorganic sol. The obtained gels have been characterized using Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The FT-IR data allowed us to hypothesize that the structure formed was that of an interpenetrating network, realized by hydrogen bonds between TiOH groups in the sol-gel intermediate species and carbonyl groups in the polymer repeating units. SEM and AFM analyses highlighted that the obtained materials were nanostructurated hybrids. To evaluate the biological properties of the hybrids, their bioactivity and cytotoxicity were investigated as a function of the PCL amount. The bioactivity of the synthesized systems was proven by the formation of a hydroxyapatite layer on the surface of samples soaked in a fluid simulating human blood plasma (SBF). MTT cytotoxicity tests and Trypan Blue dye exclusion tests were carried out exposing NIH-3T3 mouse embryonic fibroblasts for 24 and 48h to extracts from the investigated hybrid materials. The results showed that all the hybrids had a non-cytotoxic effect on target cells. Copyright © 2014. Published by Elsevier B.V.

  4. Mesomorphism of Newly Synthesized Mesogens and Surface Morphology of Chalcogenide Glass Thin Films

    Science.gov (United States)

    Sharpnack, Lewis Lee

    This dissertation research describes three related projects. The first was an investigation of two de Vries smectic liquid crystal phases that exhibit lower thermal dependence of the smectic layer spacing than the corresponding conventional smectic phases and are well suited for use in electrooptical devices. The second project studied newly synthesized mesogens. This included investigations of several liquid crystalline semiconducting mesogens and a multitude of candidate de Vries smectic mesogens. The third was an investigation of a new non-contact alignment layer of Arsenic Sulfide (As2S 3) to anchor the liquid director and use in electrooptical device. In additional to preliminary characterization methodologies such as polarizing optical microscopy and differential scanning calorimetry, two experimental techniques, X-ray diffraction (XRD) and X-ray reflectivity (XRR), were employed. The X-ray studies were conducted using the in-house spectrometers at Kent State University and the synchrotron X-ray source at the Brookhaven National Laboratory. XRR is used to investigate the structure of potential alignment layers. The results provide important insight into the challenges that need to be overcome to develop this alignment material into a viable commercial product. XRD is used to study the structural properties of several members of two new homologous series of liquid crystal compounds. The study of de Vries materials advances our understanding of the role of various molecular moieties on their phase behavior and, most importantly, their relatively temperature independent layer spacing in the Smectic A (SmA) and Smectic C (SmC) phases. This nearly constant layer spacing is critical for developing new fast ferroelectric and electroclinic effect based displays. The Stevenson research group at Queens University synthesized a multitude of new mesogens incorporating a siloxane tail at one end. This moiety is believed to enhance nano-segregation of the molecules and

  5. Antibacterial potential of silver nanoparticle synthesized by marine ...

    African Journals Online (AJOL)

    Multi resistance to antibiotics is a serious and disseminated clinical problem, common to several new compounds that block the resistance mechanism. The present study aimed at the comparative study of silver nanoparticles synthesized through actinomycetes and their antimicrobial metabolites with standard antibiotic.

  6. Design, syntheses, characterization and single crystal X-ray ...

    Indian Academy of Sciences (India)

    Administrator

    Design, syntheses, characterization and single crystal X-ray diffraction studies of multicomponent Zn-tetraphenylpor- phyrins: Novel building blocks for microporous crystalline solids. ATINDRA D SHUKLA 1, PARESH C DAVE 1, ERINGATHODI. SURESH 1, GOPAL PATHAK 2, AMITAVA DAS 1 and. PARTHASARATHI ...

  7. Characterization of chemically synthesized CdS nanoparticles

    Indian Academy of Sciences (India)

    Similar to the effects of charge carriers on optical properties, confinement of optical and acoustic phonons leads to interesting changes in the phonon spectra. In the present work, we have synthesized nanoparticles of CdS using chemical precipitation technique. The crystal structure and grain size of the particles are studied ...

  8. Function generator for synthesizing complex vibration mode patterns

    Science.gov (United States)

    Naumann, E. C.; Hagood, G. J., Jr. (Inventor)

    1973-01-01

    A simple highly flexible device for synthesizing complex vibration mode patterns is described. These mode patterns can be used to identify vibration mode data. This device sums selected sine and cosine functions and then plots the sum against a linear function.

  9. ARSENIC REMOVAL USING SOL-GEL SYNTHESIZED TITANIUM DIOXIDE NANOPARTICLES

    Science.gov (United States)

    In this study, the effectiveness of TiO2 nanoparticles in arsenic adsorption was examined. TiO2 particles (LS) were synthesized via sol-gel techniques and characterized for their crystallinity, surface area and pore volume. Batch adsorption studies were perf...

  10. Synthesizing Knowledge on Internet of Things (IoT)

    DEFF Research Database (Denmark)

    Liu, Fei; Tan, Chee-Wee; Lim, Eric T. K.

    2016-01-01

    Research on Internet of Things (IoT) has been booming for past couple of years due to technological advances and its potential for application. Nonetheless, the rapid growth of IoT articles as well as the heterogeneous nature of IoT pose challenges in synthesizing prior research on the phenomenon...

  11. Investigation of formation constant of complex of a new synthesized ...

    African Journals Online (AJOL)

    The complex formation between a newly synthesized tripodal ligand and the cation Cu2+ in water and surfactant media was studied spectrophotometrically using rank annihilation factor analysis (RAFA). According to molar ratio data the stoichiometry of complexation between the ligand and the cation Cu2+ was 1:1.

  12. Die Meta-Synthese zur Aggregation und Reflektion qualitativer Fallstudien

    DEFF Research Database (Denmark)

    Gretzinger, Susanne; Leick, Birgit

    2017-01-01

    Metasynthesis, the qualitative counterpart of metaanalysis (Hunt 1997), is defined as “an exploratory, inductive research design to synthesize primary qualitative case studies for the purpose of making contributions beyond those achieved in the original studies” (Hoon 2013: 523, see also Sandelow...

  13. development of a hydrothermal method to synthesize spherical znse ...

    African Journals Online (AJOL)

    Preferred Customer

    A hydrothermal method to synthesize spherical ZnSe nanoparticles. Bull. Chem. Soc. Ethiop. 2014, 28(1). 39 resulting in the equalization of scattering coefficients of the reference side and sample side. The integrating sphere method involves a barium sulfate-coated sphere that draws the scattered light, allowing all the light ...

  14. Electrodeposition route to synthesize cigs films – an economical way ...

    African Journals Online (AJOL)

    user

    al., 1992; Panthani et al., 2008), sputtering techniques, spin coating, selenization of Ga-rich electrodeposited precursors (Kang et al., 2009) and mist deposition. In all these attempts the aim was to synthesize the film and characterize for the application of solar cells. Electro-deposition is the route by which minimum particle ...

  15. Distinction between SnO2 nanoparticles synthesized using co ...

    Indian Academy of Sciences (India)

    Distinction between SnO2 nanoparticles synthesized using co-precipitation and solvothermal methods for the photovoltaic efficiency of dye-sensitized solar cells ... The energy conversion efficiency of the solvothermal SnO2 powders was considerably higher than that formed by co-precipitation powders; ∼ 3.20% ...

  16. Syntheses, structures and luminescence behaviour of some zinc(II ...

    Indian Academy of Sciences (India)

    Syntheses, structures and luminescence behaviour of some zinc(II) complexes containing acetate and tetradentate Schiff bases. ASHIS KUMAR MAJI, SUBHASIS ROY, SOMNATH CHOUBEY, RAJARSHI GHOSH∗ and. BARINDRA KUMAR GHOSH∗. Department of Chemistry, The University of Burdwan, Burdwan 713 104, ...

  17. Syntheses, characterization, and anti-cancer activities of pyridine ...

    Indian Academy of Sciences (India)

    Syntheses, characterization, and anti-cancer activities of pyridine-amide based compounds containing appended phenol or catechol groups. AFSAR ALIa, DEEPAK BANSALa, NAGENDRA K KAUSHIKb, NEHA KAUSHIKb,. EUN HA CHOIb and RAJEEV GUPTAa,∗. aDepartment of Chemistry, University of Delhi, Delhi 110 ...

  18. Bioactive nanocrystalline wollastonite synthesized by sol–gel ...

    Indian Academy of Sciences (India)

    The sol–gel combustion method was employed to synthesize the nanocrystalline wollastonite by taking the raw eggshell powder as a calcium source and TEOS as a source of silicate. Glycine was used as a reductant or fuel and nitrate ions present in metal nitrate acts as an oxidizer. The phase purity of the wollastonite was ...

  19. Proteins synthesized in tobacco mosaic virus infected protoplasts

    NARCIS (Netherlands)

    Huber, R.

    1979-01-01

    The study described here concerns the proteins, synthesized as a result of tobacco mosaic virus (TMV) multiplication in tobacco protoplasts and in cowpea protoplasts. The identification of proteins involved in the TMV infection, for instance in the virus RNA replication, helps to elucidate

  20. The Determinants of Information Value: Synthesizing Some General Results

    OpenAIRE

    Ronald W. Hilton

    1981-01-01

    This paper identifies the determinants of information value and synthesizes some general results concerning their effects. While some attributes of an information system exhibit a consistent directional effect on information value, attributes of the decision setting and decision maker do not.

  1. Main Group Chemistry of 9-Hydroxophenalenone: Syntheses and ...

    Indian Academy of Sciences (India)

    dell

    Main Group Chemistry of 9-Hydroxophenalenone: Syntheses and Structural Characterization of the Alkaline ... Department of Chemical Sciences, Indian Institute of Science Education and Research-. Kolkata, Mohanpur-741252, India. ‡ ...... _diffrn_radiation_source 'fine-focus sealed tube'. _diffrn_radiation_monochromator ...

  2. Parametric Audio Based Decoder and Music Synthesizer for Mobile Applications

    NARCIS (Netherlands)

    Oomen, A.W.J.; Szczerba, M.Z.; Therssen, D.

    2011-01-01

    This paper reviews parametric audio coders and discusses novel technologies introduced in a low-complexity, low-power consumption audiodecoder and music synthesizer platform developed by the authors. Thedecoder uses parametric coding scheme based on the MPEG-4 Parametric Audio standard. In order to

  3. Antibacterial activity of silver nanoparticles synthesized from serine

    Energy Technology Data Exchange (ETDEWEB)

    Jayaprakash, N. [Catalysis and Nanomaterials Research Laboratory, Department of Chemistry, Loyola College, Chennai 600 034 (India); SRM Valliammai Engineering College, Department of Chemistry, Chennai 603 203 (India); Judith Vijaya, J., E-mail: jjvijayaloyola@yahoo.co.in [Catalysis and Nanomaterials Research Laboratory, Department of Chemistry, Loyola College, Chennai 600 034 (India); John Kennedy, L. [Materials Division, School of Advanced Sciences, VIT University, Chennai Campus, Chennai 600 048 (India); Priadharsini, K.; Palani, P. [Department of Center for Advanced Study in Botany, University of Madras, Guindy Campus, Chennai 600 025 (India)

    2015-04-01

    Silver nanoparticles (Ag NPs) were synthesized by a simple microwave irradiation method using polyvinyl pyrrolidone (PVP) as a capping agent and serine as a reducing agent. UV–Visible spectra were used to confirm the formation of Ag NPs by observing the surface plasmon resonance (SPR) band at 443 nm. The emission spectrum of Ag NPs showed an emission band at 484 nm. In the presence of microwave radiation, serine acts as a reducing agent, which was confirmed by Fourier transformed infrared (FT-IR) spectrum. High-resolution transmission electron microscopy (HR-TEM) and high-resolution scanning electron microscopy (HR-SEM) were used to investigate the morphology of the synthesized sample. These images showed the sphere-like morphology. The elemental composition of the sample was determined by the energy dispersive X-ray analysis (EDX). Selected area electron diffraction (SAED) was used to find the crystalline nature of the Ag NPs. The electrochemical behavior of the synthesized Ag NPs was analyzed by the cyclic voltammetry (CV). Antibacterial experiments showed that the prepared Ag NPs showed relatively similar antibacterial activities, when compared with AgNO{sub 3} against Gram-positive and Gram-negative bacteria. - Highlights: • Microwave irradiation method is used to synthesize silver nanoparticles. • Highly stable silver nanoparticles are produced from serine. • A detailed study of antibacterial activities is discussed. • Formation mechanism of silver microspheres has been proposed.

  4. A new antibiotic, fumaramidmycin. II. Isolation, structure and syntheses.

    Science.gov (United States)

    Suhara, Y; Maruyama, H B; Koto, Y; Miyasaka, Y; Yokose, K

    1975-09-01

    A new antibiotic fumaramidmycin produced by Streptomyces kurssanovii NR-7GG1 was isolated as colorless crystals. The structure was shown to be N-(phenylacetyl) fumaramide. Starting from fumaramic acid, fumaramidmycin has been synthesized in good yield, in which the key stage involves N-acylated imino ether formation followed by mild acid hydrolysis. Five analogues of fumaramidmycin have also been prepared.

  5. Syntheses, structures and properties of two dinuclear mercury (II ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 126; Issue 3. Syntheses, structures and properties of two dinuclear mercury(II) iodide compounds containing tetradentate tripodal amine/pentadentate N-donor Schiff base: Control of molecular and crystalline architectures by varying ligand matrices. Subhasis Roy ...

  6. Highly Stable Foams from Block Oligomers Synthesized by Enzymatic Reactions

    NARCIS (Netherlands)

    Sagis, L.M.C.; Boeriu, C.G.; Frissen, A.E.; Schols, H.A.; Wierenga, P.A.

    2008-01-01

    We have synthesized a new amphiphilic block oligomer by the enzymatic linking of a fatty acid (lauric acid) to a fructan oligomer (inulin) and tested the functionality of this carbohydrate derivative in foam stabilization. The structure of the modified oligosaccharide was found to be

  7. Meta-Analysis: A Systematic Method for Synthesizing Counseling Research

    Science.gov (United States)

    Whiston, Susan C.; Li, Peiwei

    2011-01-01

    The authors provide a template for counseling researchers who are interested in quantitatively aggregating research findings. Meta-analytic studies can provide relevant information to the counseling field by systematically synthesizing studies performed by researchers from diverse fields. Methodologically sound meta-analyses require careful…

  8. Nanoparticles of complex metal oxides synthesized using the ...

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 65; Issue 5. Nanoparticles of complex metal oxides synthesized using the reverse-micellar and polymeric precursor routes ... In addition we also discuss the synthesis of some transition metal (Mn and Cu) oxalate nanorods using the reverse-micellar route.

  9. Synthesizing Friction In A Force-Reflecting Hand Controller

    Science.gov (United States)

    Kauffman, James

    1993-01-01

    Algorithm synthesizes frictionlike limited reaction force in force-reflecting hand controller. Synthetic friction enhances operator's feel and improves control characteristics in two ways: handle of controller retains setting when operator releases it, and in case of multiple-axis controller, synthetic frictional force helps to hold control setting on one axis when handle pushed to command movement along another axis.

  10. Traction in elastohydrodynamic line contacts for two synthesized hydrocarbon fluids

    Science.gov (United States)

    Trachman, E. G.; Cheng, H. S.

    1973-01-01

    The paper describes the disk machine designed and constructed for the investigation of the traction in elastohydrodynamic line contacts for two synthesized hydrocarbon fluids. The results of this experimental study are presented and compared with the theoretical predictions of traction according to the thermal and non-Newtonian theory recently presented by the authors.

  11. Syntheses, structures and properties of two coordination polymers of ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 129; Issue 12. Syntheses, structures and properties of two coordination polymers of Cadmium(II) pseudohalide containing an in situ generated bidentate Schiff base: Control of dimensionality by varying pseudohalides. REGULAR ARTICLE Volume 129 Issue 12 ...

  12. Syntheses, structures and properties of two coordination polymers of ...

    Indian Academy of Sciences (India)

    Dipu Sutradhar

    2017-11-10

    Nov 10, 2017 ... Syntheses, structures and properties of two coordination polymers of Cadmium(II) pseudohalide containing an in situ generated bidentate Schiff base: Control of dimensionality by varying pseudohalides. DIPU SUTRADHARa, HABIBAR CHOWDHURYb, SUSHOVAN KONERa,. NIMAI CHANDRA SAHAc,∗.

  13. The Challenge of Synthesizing Oligomers for Molecular Wires

    DEFF Research Database (Denmark)

    Søndergaard, Roar; Krebs, Frederik C

    2011-01-01

    molecules with a molecular length up to 9–10 nm which allow for the introduction of aromatic thioacetate functionality in fully conjugated oligomer systems. Oligomers containing 3–15 phenyl units were synthesized by step wise Horner-Wadsworth-Emmons (HWE) reactions of a bifunctional OPV-monomer, which...

  14. Cost effective and shape controlled approach to synthesize ...

    Indian Academy of Sciences (India)

    Cost effective and shape controlled approach to synthesize hierarchically assembled NiO nanoflakes for the removal of toxic heavy metal ions in aqueous solution. K Yogesh Kumar H B Muralidhara Y Arthoba Nayaka H Hanumanthappa M S Veena S R Kiran Kumar. Volume 38 Issue 1 February 2015 pp 271-282 ...

  15. Syntheses, characterization and crystal structures of potassium and ...

    Indian Academy of Sciences (India)

    Syntheses, characterization and crystal structures of potassium and barium complexes of a Schiff base ligand with different anions. Bhavesh Parmar Kamal Kumar Bisht Pratyush Maiti Parimal Paul Eringathodi Suresh. Special issue on Chemical Crystallography Volume 126 Issue 5 September 2014 pp 1373-1384 ...

  16. Syntheses, characterization and crystal structures of potassium and ...

    Indian Academy of Sciences (India)

    Syntheses, characterization and crystal structures of potassium and barium complexes of a Schiff base ligand with different anions. BHAVESH PARMARa, KAMAL KUMAR BISHTa,b, PRATYUSH MAITIc, PARIMAL PAULa,b, and ERINGATHODI SURESHa,b,∗. aAnalytical Discipline and Centralized Instrument Facility, ...

  17. Layered semiconductor neutron detectors

    Science.gov (United States)

    Mao, Samuel S; Perry, Dale L

    2013-12-10

    Room temperature operating solid state hand held neutron detectors integrate one or more relatively thin layers of a high neutron interaction cross-section element or materials with semiconductor detectors. The high neutron interaction cross-section element (e.g., Gd, B or Li) or materials comprising at least one high neutron interaction cross-section element can be in the form of unstructured layers or micro- or nano-structured arrays. Such architecture provides high efficiency neutron detector devices by capturing substantially more carriers produced from high energy .alpha.-particles or .gamma.-photons generated by neutron interaction.

  18. Physical Layer Network Coding

    DEFF Research Database (Denmark)

    Fukui, Hironori; Yomo, Hironori; Popovski, Petar

    2013-01-01

    Physical layer network coding (PLNC) has the potential to improve throughput of multi-hop networks. However, most of the works are focused on the simple, three-node model with two-way relaying, not taking into account the fact that there can be other neighboring nodes that can cause/receive inter......Physical layer network coding (PLNC) has the potential to improve throughput of multi-hop networks. However, most of the works are focused on the simple, three-node model with two-way relaying, not taking into account the fact that there can be other neighboring nodes that can cause...

  19. Crystallinity of inorganic films grown by atomic layer deposition: Overview and general trends

    Science.gov (United States)

    Miikkulainen, Ville; Leskelä, Markku; Ritala, Mikko; Puurunen, Riikka L.

    2013-01-01

    Atomic layer deposition (ALD) is gaining attention as a thin film deposition method, uniquely suitable for depositing uniform and conformal films on complex three-dimensional topographies. The deposition of a film of a given material by ALD relies on the successive, separated, and self-terminating gas-solid reactions of typically two gaseous reactants. Hundreds of ALD chemistries have been found for depositing a variety of materials during the past decades, mostly for inorganic materials but lately also for organic and inorganic-organic hybrid compounds. One factor that often dictates the properties of ALD films in actual applications is the crystallinity of the grown film: Is the material amorphous or, if it is crystalline, which phase(s) is (are) present. In this thematic review, we first describe the basics of ALD, summarize the two-reactant ALD processes to grow inorganic materials developed to-date, updating the information of an earlier review on ALD [R. L. Puurunen, J. Appl. Phys. 97, 121301 (2005)], and give an overview of the status of processing ternary compounds by ALD. We then proceed to analyze the published experimental data for information on the crystallinity and phase of inorganic materials deposited by ALD from different reactants at different temperatures. The data are collected for films in their as-deposited state and tabulated for easy reference. Case studies are presented to illustrate the effect of different process parameters on crystallinity for representative materials: aluminium oxide, zirconium oxide, zinc oxide, titanium nitride, zinc zulfide, and ruthenium. Finally, we discuss the general trends in the development of film crystallinity as function of ALD process parameters. The authors hope that this review will help newcomers to ALD to familiarize themselves with the complex world of crystalline ALD films and, at the same time, serve for the expert as a handbook-type reference source on ALD processes and film crystallinity.

  20. Low power continuous-wave nonlinear optical effects in MoS2 nanosheets synthesized by simple bath ultrasonication

    Science.gov (United States)

    Karmakar, S.; Biswas, S.; Kumbhakar, P.

    2017-11-01

    Here, we have unveiled low power continuous-wave nonlinear optical properties of a few layer (4-12L) Molybdenum disulfide (MoS2) dispersion in N, N-dimethylformamide (DMF) by using spatial self-phase modulation technique. The effective third-order nonlinear susceptibility of the monolayer has been estimated to be as high as ∼10-8 esu. Also a low power technique of syntheses of stable and a few-layer (4-12L) MoS2 dispersion in DMF has been demonstrated here by utilizing ultrasonication bath treatment combined with the natural gravitation sedimentation effect starting from the bulk MoS2 powder. The synthesized samples are exhibiting interesting linear optical absorption and photoluminescence (PL) after exfoliation to a few layer nanosheets (NSs) and the exciton binding energies have been determined from PL emission data in association with 2D hydrogenic Bohr-exciton model. The specific capacitances (Csp) of the electrode prepared with MoS2 NSs have been measured by electrochemical measurement and the highest value of Csp is 382 Fg-1 for 4L sample. The reported intensity driven change of Csp in the presence of light emitted from light emitting diodes of various colours is unprecedented. The demonstrated technique can be scaled up for large scale and easy synthesis of other 2D materials having applications in optoelectronics and energy devices.

  1. Characterization and in vitro biological evaluation of mineral/osteogenic growth peptide nanocomposites synthesized biomimetically on titanium

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Cen; Kong, Xiangdong [Bio-X Center, College of Life Sciences, Zhejiang Sci-Tech University, Hangzhou 310018 (China); Zhang, Sheng-Min [Advanced Biomaterials and Tissue Engineering Center, Huazhong University of Science and Technology, Wuhan 430074 (China); Lee, In-Seop, E-mail: inseop@yonsei.ac.kr [Bio-X Center, College of Life Sciences, Zhejiang Sci-Tech University, Hangzhou 310018 (China); Institute of Natural Sciences, Yonsei University, Seoul 120-749 (Korea, Republic of)

    2015-04-15

    Graphical abstract: - Highlights: • Mineral/OGP nanocomposite layers were synthesized biomimetically on Ti substrates. • Incorporated OGP affected the morphology and ultimate structure of mineral. • Incorporated OGP improved the MSCs adhesion, proliferation, and ALP activity. - Abstract: Nanocomposite layers of mineral/osteogenic growth peptide (OGP) were synthesized on calcium phosphate coated titanium substrates by immersing in calcium-phosphate buffer solution containing OGP. Peptide incorporated mineral was characterized by determining quantity loaded, effects on mineral morphology and structure. Also, the biological activity was investigated by cell adhesion, proliferation assay, and measurement of alkaline phosphatase (ALP) activity. X-ray photoelectron spectroscopy (XPS) and micro-bicinchoninic acid (BCA) assay revealed that OGP was successfully incorporated with mineral and the amount was increased with immersion time. Incorporated OGP changed the mineral morphology from sharp plate-like shape to more rounded one, and the octacalcium phosphate structure of the mineral was gradually transformed into apatite. With confocal microscopy to examine the incorporation of fluorescently labeled peptide, OGP was evenly distributed throughout mineral layers. Mineral/OGP nanocomposites promoted cell adhesion and proliferation, and also increased ALP activity of mesenchymal stem cells (MSCs). Results presented here indicated that the mineral/OGP nanocomposites formed on titanium substrates had the potential for applications in dental implants.

  2. Thermotoga lettingae Can Salvage Cobinamide To Synthesize Vitamin B12

    Science.gov (United States)

    Butzin, Nicholas C.; Secinaro, Michael A.; Swithers, Kristen S.; Gogarten, J. Peter

    2013-01-01

    We recently reported that the Thermotogales acquired the ability to synthesize vitamin B12 by acquisition of genes from two distantly related lineages, Archaea and Firmicutes (K. S. Swithers et al., Genome Biol. Evol. 4:730–739, 2012). Ancestral state reconstruction suggested that the cobinamide salvage gene cluster was present in the Thermotogales' most recent common ancestor. We also predicted that Thermotoga lettingae could not synthesize B12 de novo but could use the cobinamide salvage pathway to synthesize B12. In this study, these hypotheses were tested, and we found that Tt. lettingae did not synthesize B12 de novo but salvaged cobinamide. The growth rate of Tt. lettingae increased with the addition of B12 or cobinamide to its medium. It synthesized B12 when the medium was supplemented with cobinamide, and no B12 was detected in cells grown on cobinamide-deficient medium. Upstream of the cobinamide salvage genes is a putative B12 riboswitch. In other organisms, B12 riboswitches allow for higher transcriptional activity in the absence of B12. When Tt. lettingae was grown with no B12, the salvage genes were upregulated compared to cells grown with B12 or cobinamide. Another gene cluster with a putative B12 riboswitch upstream is the btuFCD ABC transporter, and it showed a transcription pattern similar to that of the cobinamide salvage genes. The BtuF proteins from species that can and cannot salvage cobinamides were shown in vitro to bind both B12 and cobinamide. These results suggest that Thermotogales species can use the BtuFCD transporter to import both B12 and cobinamide, even if they cannot salvage cobinamide. PMID:24014541

  3. Layers in Melas Chasma

    Science.gov (United States)

    2006-01-01

    [figure removed for brevity, see original site] Click on image for larger annotated version This scene of layered deposits is from Melas Chasma, part of the Valles Marineris valley network. The area consists of a series of plateaus and cliffs that form a step-like terrain similar to the Grand Staircase-Escalante region of southwest Utah. The upper-right half of the image covers the highest plateau, and lower cliffs and plateaus step down in elevation toward the lower left of the image. Dunes of dark sand commonly cover the flat plateaus and distinct layers of bedrock are exposed in the cliffs. The orientations of these layers may help scientists to understand how the layers formed and the kind of environment that the layers formed in. Black rectangles on the left side of the image are areas where the image data was lost during transmission from Mars Reconnaissance Orbiter to Earth. This subscene [above] shows a series of boulder tracks on the left side of the image. The boulders fell from the cliffs above and left behind a series of small depressions. Each depression was made as the boulder bounced and rolled along the surface. In many cases, the tracks can be followed to the specific boulder that made them. Also visible in this subscene are cross-sections through the layered bedrock. This bedrock likely formed through settling of sand-sized particles out of the air or out of a body of water that has since drained away. These layers are 'cross-bedded', which means that subsequent layers are not parallel to each other but are instead oriented at an angle to other layers. The fact that these layers are cross-bedded indicates that the sand-sized particles were moved horizontally along the surface as they settled, just like sand dunes or ripples at the bottom of a stream. The size and shape of these cross-beds may help scientists to determine if the layers formed underwater or on land. Image PSP_001377_1685 was taken by the High Resolution Imaging Science Experiment

  4. Rat mesangial cells in vitro synthesize a spectrum of proteoglycan species including those of the basement membrane and interstitium

    DEFF Research Database (Denmark)

    Thomas, G J; Shewring, L; McCarthy, K J

    1995-01-01

    including laminin, fibronectin, type IV collagen and the basement membrane heparan sulphate proteoglycan (BM-HSPG) known as perlecan. In addition, using Mab 2B5 we demonstrate that RMC synthesize a specific basement membrane chondroitin sulfate (BM-CSPG), a matrix component that in normal animals...... is localized in the mesangium but is not found in the pericapillary glomerular basement membrane (GBM). Further characterization of the proteoglycans synthesized by RMC in vitro revealed: (i) a second large CSPG, identified as versican; (ii) two small dermatan sulphate proteoglycans identified as biglycan...... and decorin, which together account for the majority of the proteoglycans; (iii) a large HSPG-I, probably related to perlecan; and (iv) a small HSPG-II. The cell layer proteoglycans can be sub-divided into a class that are probably free in the membrane, and a class of anchored molecules of the extracellular...

  5. Polymer mediated layer-by-layer assembly of different shaped gold nanoparticles.

    Science.gov (United States)

    Budy, Stephen M; Hamilton, Desmond J; Cai, Yuheng; Knowles, Michelle K; Reed, Scott M

    2017-02-01

    Gold nanoparticles (GNPs) have a wide range of properties with potential applications in electronics, optics, catalysis, and sensing. In order to demonstrate that dense, stable, and portable samples could be created for these applications, multiple layers of GNPs were assembled via drop casting on glass substrates by layer-by-layer (LBL) techniques. Two cationic polyelectrolytes, poly(diallyldimethylammonium chloride) and polyethyleneimine, one anionic polyelectrolyte, poly(sodium 4-styrene sulfonate), and one neutral polymer, polyvinylpyrrolidone, were combined with four different shapes of GNPs (spherical, rod, triangular prismatic, and octahedral) to prepare thin films. A subset of these polymer nanoparticle combinations were assembled into thin films. Synthesized GNPs were characterized via dynamic light scattering, UV-vis spectroscopy, and transmission electron microscopy and the LBL thin films were characterized using UV-vis spectroscopy and atomic force microscopy. Sensing applications of the nanoparticles in solution and thin films were tested by monitoring the localized surface plasmon resonance of the GNPs. LBL thin films were prepared ranging from 25 to 100 layers with optical densities at plasmon from 0.5 to 3.0. Sensitivity in solutions ranged from 14 to 1002nm/refractive index units (RIU) and films ranged from 18.8 to 135.1nm/RIU suggesting reduced access to the GNPs within the films. Copyright © 2016 Elsevier Inc. All rights reserved.

  6. Hybrid CBC layered concept

    OpenAIRE

    Río Suárez, Olga; Nguyen, D.

    2010-01-01

    The poster introduces some of the preliminary results in case of a last generation of CBC layered samples prepared according to P200930081 CSIC filed patent. This solution, based on nanotechnology concepts which optimize material properties, is rooted in economic considerations, better working conditions and environmental issues.

  7. Physical layer network coding

    DEFF Research Database (Denmark)

    Fukui, Hironori; Popovski, Petar; Yomo, Hiroyuki

    2014-01-01

    Physical layer network coding (PLNC) has been proposed to improve throughput of the two-way relay channel, where two nodes communicate with each other, being assisted by a relay node. Most of the works related to PLNC are focused on a simple three-node model and they do not take into account...

  8. Our Shrinking Ozone Layer

    Indian Academy of Sciences (India)

    Depletion of the Earth's ozone layer is one of the major environmental concerns for the new millennium having serious implications on human health, agriculture and cli- mate. In the past decades, research by the international scientific community has been directed towards under- standing the impact of human interference ...

  9. MITRE sensor layer prototype

    Science.gov (United States)

    Duff, Francis; McGarry, Donald; Zasada, David; Foote, Scott

    2009-05-01

    The MITRE Sensor Layer Prototype is an initial design effort to enable every sensor to help create new capabilities through collaborative data sharing. By making both upstream (raw) and downstream (processed) sensor data visible, users can access the specific level, type, and quantities of data needed to create new data products that were never anticipated by the original designers of the individual sensors. The major characteristic that sets sensor data services apart from typical enterprise services is the volume (on the order of multiple terabytes) of raw data that can be generated by most sensors. Traditional tightly coupled processing approaches extract pre-determined information from the incoming raw sensor data, format it, and send it to predetermined users. The community is rapidly reaching the conclusion that tightly coupled sensor processing loses too much potentially critical information.1 Hence upstream (raw and partially processed) data must be extracted, rapidly archived, and advertised to the enterprise for unanticipated uses. The authors believe layered sensing net-centric integration can be achieved through a standardize-encapsulate-syndicateaggregate- manipulate-process paradigm. The Sensor Layer Prototype's technical approach focuses on implementing this proof of concept framework to make sensor data visible, accessible and useful to the enterprise. To achieve this, a "raw" data tap between physical transducers associated with sensor arrays and the embedded sensor signal processing hardware and software has been exploited. Second, we encapsulate and expose both raw and partially processed data to the enterprise within the context of a service-oriented architecture. Third, we advertise the presence of multiple types, and multiple layers of data through geographic-enabled Really Simple Syndication (GeoRSS) services. These GeoRSS feeds are aggregated, manipulated, and filtered by a feed aggregator. After filtering these feeds to bring just the type

  10. Hierarchical porous carbons with layer-by-layer motif architectures from confined soft-template self-assembly in layered materials

    Science.gov (United States)

    Wang, Jie; Tang, Jing; Ding, Bing; Malgras, Victor; Chang, Zhi; Hao, Xiaodong; Wang, Ya; Dou, Hui; Zhang, Xiaogang; Yamauchi, Yusuke

    2017-06-01

    Although various two-dimensional (2D) nanomaterials have been explored as promising capacitive materials due to their unique layered structure, their natural restacking tendency impedes electrolyte transport and significantly restricts their practical applications. Herein, we synthesize all-carbon layer-by-layer motif architectures by introducing 2D ordered mesoporous carbons (OMC) within the interlayer space of 2D nanomaterials. As a proof of concept, MXenes are selected as 2D hosts to design 2D-2D heterostructures. Further removing the metal elements from MXenes leads to the formation of all-carbon 2D-2D heterostructures consisting of alternating layers of MXene-derived carbon (MDC) and OMC. The OMC layers intercalated with the MDC layers not only prevent restacking but also facilitate ion diffusion and electron transfer. The performance of the obtained hybrid carbons as supercapacitor electrodes demonstrates their potential for upcoming electronic devices. This method allows to overcome the restacking and blocking of 2D nanomaterials by constructing ion-accessible OMC within the 2D host material.

  11. Mesoporous Pt-Co oxygen reduction reaction (ORR) catalysts for low temperature proton exchange membrane fuel cell synthesized by alternating sputtering

    Science.gov (United States)

    Sievers, Gustav; Mueller, Steffen; Quade, Antje; Steffen, Florian; Jakubith, Sven; Kruth, Angela; Brueser, Volker

    2014-12-01

    Mesoporous catalysts with enhanced oxygen reduction reaction (ORR) activity for PEM fuel cells are synthesized by alternating sputtering of Pt and Co onto gas diffusion layers with microporous layers. Co is acting as a template for synthesis of a porous Pt nanostructure. For such proposed Pt-Co catalysts the kinetic current in the ORR was found to be increased by a factor of up to 16 and the mass specific current in PEM single cells by a factor of up to 7. Co was found to be deposited at the grain boundary of the Pt layer and dissolves under acidic conditions resulting in a mesoporous Pt catalyst which is advantageous for gas diffusion catalysts. Microstructural and compositional parameters were optimised in order to obtain a high kinetic current and lower onset potential for the ORR. The most favourable Co layer thickness was determined to be 2 nm. The optimal Pt-Co catalyst can be synthesized by continuously varying the Pt layer thickness. The highest Pt mass activity was found at a layer thickness of 30.5 nm. Catalysts were characterised by SEM, EDX, electrochemical half cell and PEM single cell tests.

  12. Changes Of Hydration Level In Type I Collagen And Glycosaminoglycans Synthesized In The Rat’s Skin Under The Mechanical Stress

    Directory of Open Access Journals (Sweden)

    Alexandr M. Ponomarenko

    2013-01-01

    Full Text Available Changes of Hydratation Level Of Type I Collagen And Glycosaminoglycans That Are Synthesized In The Rat’s Skin Under The Mechanical Stress. The effect of the mechanical stress on the levels of hydratation of type I collagen and glycosaminoglycans that are synthesized in it, has been studied in vitro using the rats’ skin. The measured hydration of isotherms has shown that mechanical stress in the skin increases and decreases the amount of absorbed water in glycosaminoglycans and in collagen, respectively. Сalculated the average amounts of water molecules in collagen tripeptide and glycosaminoglycans disaccharide unit in the inside and outside layers of their hydrate shells

  13. In situ synthesis of gold nanoparticles in exponentially-growing layer-by-layer films.

    Science.gov (United States)

    Shen, Liyan; Rapenne, Laetitia; Chaudouet, Patrick; Ji, Jian; Picart, Catherine

    2012-12-15

    In situ synthesis of inorganic nanoparticles (NPs) in polyelectrolytes multilayers (PEMs) has recently gained much attention. Due to the versatility of their composition, PEMs offer a unique opportunity to synthesize a variety of NPs. So far, mostly cationic precursors have been used and only few studies have investigated the possibility of using amine groups to bind anionic precursors. Here, we use exponentially growing poly(L-lysine)/hyaluronan (PLL/HA) films as a nanoreservoir to bind and sequester aurochlorate (AuCl(4)(-)) anions thanks to the large number of free amine groups. The polypeptide-polysaccharide reactive template enabled the formation in a spatially-confined environment of gold NP at a very high yield. The synthesized gold NPs were homogenous and well-dispersed in the nanocomposite. Importantly, there was no particular effect of the film-ending layer (either PLL or HA). The largest particles of ~9 nm and the largest amount of gold were obtained at acidic pH of 3. When the pH was increased, smaller and more numerous NPs were synthesized but the total amount of gold was lower. Based on UV-visible spectrometry, FTIR and TEM data, we finally propose a scheme for the mechanism of gold NPs formation, in which several groups of PLL and HA contribute to the binding of gold ions, the nucleation and growth of NPs, and their stabilization in the "bulk" of the film. Copyright © 2012 Elsevier Inc. All rights reserved.

  14. Graphene-Multiwalled Carbon Nanotube Hybrids Synthesized by Gamma Radiations: Application as a Glucose Sensor

    Directory of Open Access Journals (Sweden)

    Leila Shahriary

    2014-01-01

    Full Text Available Three-dimensional hybrid nanomaterial of graphene-multiwalled carbon nanotubes (G-MWCNTs was synthesized using gamma rays emitted by a 60Co source with a dose rate of 3.95 Gy min−1. The products were characterized by fourier transform infrared (FTIR, ultraviolet-visible (UV-Vis, photoluminescence (PL, and micro-Raman spectroscopy, X-ray diffraction analysis (XRD, scanning electron microscopy (SEM, and transmission electron microscopy (TEM. FTIR and UV-Vis analysis reveals the formation of hybrid nanomaterial which is confirmed by XRD, micro-Raman analysis, and PL. SEM micrograph depicts the composite structure of graphene layers and MWCNTs, while the TEM micrograph exhibits graphene layers covered by MWCNTs. The G-MWCNTs hybrid used as electrode for electrochemical studies in K3Fe(CN6 shows enhancement in electrocatalytic behavior, compared to each individual starting material, therefore, has been applied for amperometric sensing of glucose in alkaline solution and exhibits sensitivity of 12.5 μAmM-1 cm−2 and low detection limit 1.45 μM (S/N=3 in a linear range of 0.1 to 14 mM (R2=0.985.

  15. SHI induced defects in chemically synthesized graphene oxide for hydrogen storage applications

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Preetam K., E-mail: preetam.nano@gmail.com; Sharma, Vinay; Rajaura, Rajveer Singh; Singh, M. [Department of Physics, University of Rajasthan, Jaipur-302004, India. (India); Srivastava, Subodh; Vijay, Y. K. [Department of Physics, University of Rajasthan, Jaipur-302004, India. (India); Department of Physics, Vivekananda Global University, Jaipur-303012, India. (India); Sharma, S. S. [Department of Physics, Govt. Women Engineering College, Ajmer-305002, India. (India)

    2016-05-06

    Graphene, due to its unique properties arising from the single carbon layer, is a potential candidate for applications in a variety of fields including sensors, photovoltaics and energy storage. The atomic structure and morphology of the carbon nanomaterials especially graphene can be tailored by energetic ionic irradiation. As graphene sheet is very stable, the surface have less reactivity as compared to the edges of the sheets. By surface modification with energetic ion-beams additional dangling bonds can be formed to enhance the surface activity of the graphene film which could be exploited in a variety of applications. In the present work, graphene oxide was synthesized by improved Hummers’ Method. The irradiation was done with Ag{sup +} ions carrying energy 100 MeV with the fluence of 3×10{sup 13}. Raman spectrum of graphene irradiated by Ag{sup +} beam shows additional disordered peaks of D´ and D+G bands. There is also a decrease in the intensity of D band. AFM images depict the increase in the surface roughness of the films. This can be attributed to the increase in the defects in the flakes and intermixing of adjacent layers by irradiation.

  16. Deep neural network using color and synthesized three-dimensional shape for face recognition

    Science.gov (United States)

    Rhee, Seon-Min; Yoo, ByungIn; Han, Jae-Joon; Hwang, Wonjun

    2017-03-01

    We present an approach for face recognition using synthesized three-dimensional (3-D) shape information together with two-dimensional (2-D) color in a deep convolutional neural network (DCNN). As 3-D facial shape is hardly affected by the extrinsic 2-D texture changes caused by illumination, make-up, and occlusions, it could provide more reliable complementary features in harmony with the 2-D color feature in face recognition. Unlike other approaches that use 3-D shape information with the help of an additional depth sensor, our approach generates a personalized 3-D face model by using only face landmarks in the 2-D input image. Using the personalized 3-D face model, we generate a frontalized 2-D color facial image as well as 3-D facial images (e.g., a depth image and a normal image). In our DCNN, we first feed 2-D and 3-D facial images into independent convolutional layers, where the low-level kernels are successfully learned according to their own characteristics. Then, we merge them and feed into higher-level layers under a single deep neural network. Our proposed approach is evaluated with labeled faces in the wild dataset and the results show that the error rate of the verification rate at false acceptance rate 1% is improved by up to 32.1% compared with the baseline where only a 2-D color image is used.

  17. Inorganic-organic hybrids formed by P,P'-diphenylmethylenediphosphinate, pcp2-, with the Cu2+ ion. X-ray crystal structures of [Cu(pcp)(H2O)2] x H2O and [Cu(pcp)(bipy)(H2O)].

    Science.gov (United States)

    Ciattini, Samuele; Costantino, Ferdinando; Lorenzo-Luis, Pablo; Midollini, Stefano; Orlandini, Annabella; Vacca, Alberto

    2005-05-30

    Weakly coordinated [Cu(pcp)(H2O)n] complexes are formed in aqueous solution, at room temperature, by interaction of P,P'-diphenylmethylene diphosphinic acid (H2pcp) with copper(II) ions. However, heating of the solutions gives rise to the formation of two extended metal-oxygen networks of formulas [Cu(pcp)(H2O)2] x H2O, 1, and [Cu(pcp)(H2O)2], 2. In the presence of 2,2'-bipyridyl (bipy) the diamine derivative [Cu(pcp)(bipy)(H2O)], 4, has been isolated. Complex 1 easily loses water to form a monohydrated derivative [Cu(pcp)H2O], 3, whereas 2 is completely dehydrated after prolonged heating at 150 degrees C, under vacuum. The compounds 1 and 2 have substantially different solid-state structures as shown by X-ray powder diffraction spectra, IR spectra, and thermogravimetric analyses. Consistently, the two complexes cannot be directly interconverted and present different dehydration pathways. Rehydration of these materials in both cases allows quantitative formation of 1. X-ray analysis established that the structure of 1 consists of a corrugated two-dimensional layered polymeric array, where infinite zigzag chains of Cu centers and bridging phenylphosphinate ligands are linked together through strong hydrogen-bonding interactions; the structure of 4 consists of monodimensional polymers, where the hydrogen-bonding interactions play an essential bridging role in the extended architecture. In both structures the metal center displays a five-coordinate environment with approximate square pyramidal geometry, with the pcp ligand acting as bidentate and monodentate in 1 and solely as bidentate in 4. In 1 the coordination sphere is completed through water molecules; in 4, through water and diamine ligands. The thermogravimetric analyses of the complexes are compared with those of the related hybrids [M(pcp)(H2O)3] x H2O, where M = Mn, Co, or Ni, confirming that noncoordinated water molecules also play a basic role in determining the molecular packing.

  18. Biomimetic processing of oriented crystalline ceramic layers

    Energy Technology Data Exchange (ETDEWEB)

    Cesarano, J.; Shelnutt, J.A.

    1997-10-01

    The aim of this project was to develop the capabilities for Sandia to fabricate self assembled Langmuir-Blodgett (LB) films of various materials and to exploit their two-dimensional crystalline structure to promote the growth of oriented thin films of inorganic materials at room temperature. This includes the design and synthesis of Langmuir-active (amphiphilic) organic molecules with end groups offering high nucleation potential for various ceramics. A longer range goal is that of understanding the underlying principles, making it feasible to use the techniques presented in this report to fabricate unique oriented films of various materials for electronic, sensor, and membrane applications. Therefore, whenever possible, work completed in this report was completed with the intention of addressing the fundamental phenomena underlying the growth of crystalline, inorganic films on template layers of highly organized organic molecules. This problem was inspired by biological processes, which often produce exquisitely engineered structures via templated growth on polymeric layers. Seashells, for example, exhibit great toughness owing to their fine brick-and-mortar structure that results from templated growth of calcium carbonate on top of layers of ordered organic proteins. A key goal in this work, therefore, is to demonstrate a positive correlation between the order and orientation of the template layer and that of the crystalline ceramic material grown upon it. The work completed was comprised of several parallel efforts that encompassed the entire spectrum of biomimetic growth from solution. Studies were completed on seashells and the mechanisms of growth for calcium carbonate. Studies were completed on the characterization of LB films and the capability developed for the in-house fabrication of these films. Standard films of fatty acids were studied as well as novel polypeptides and porphyrins that were synthesized.

  19. Planar geometry of 4-substituted-2,2'-bipyridines synthesized by Sonogashira and Suzuki cross-coupling reactions

    Energy Technology Data Exchange (ETDEWEB)

    Luong Thi, T. T., E-mail: thuyltt@hnue.edu.vn; Nguyen Bich, N.; Nguyen, H. [Hanoi National University of Education, Chemistry Department (Viet Nam); Van Meervelt, L., E-mail: luc.vanmeervelt@chem.kuleuven.be [KU Leuven, Chemistry Department (Belgium)

    2015-12-15

    Two 4-substituted 2,2'-bipyridines, namely 4-(ferrocenylethynyl)-2,2'-bipyridine (I) and 4-ferrocenyl-2,2'-bipyridine (II) have been synthesized and fully characterized via single-crystal X-ray diffraction and {sup 1}H and {sup 13}C NMR analyses. The π-conjugated system designed from 2,2'-bipyridine modified with the ferrocenylethynyl and ferrocenyl groups shows the desired planarity. In the crystal packing of I and II, the molecules arrange themselves in head-to-tail and head-to-head motifs, respectively, resulting in consecutive layers of ferrocene and pyridine moieties.

  20. The performance of hydrophobic and hydrophilic moieties in synthesized thiol cationic surfactants on corrosion inhibition of carbon steel in HCl

    Directory of Open Access Journals (Sweden)

    E.M.S. Azzam

    2015-12-01

    Full Text Available Here in, cationic surfactants namely (1-octyl, decyl, and dodecyl-4-mercaptopyridine-1-ium bromide I, II and III, respectively, were synthesized. The inhibition effect of these surfactants on the corrosion of carbon steel in 1 M HCl was studied by polarization, electrochemical impedance spectroscopy (EIS and weight loss measurements. Polarization curves revealed that the used inhibitors represent mixed-type inhibitors. Adsorption of used inhibitors led to a reduction in the double layer capacitance and an increase in the charge transfer resistance. Adsorption of used compounds was found to obey Langmuir isotherm.

  1. Peeling Back the Layers

    Science.gov (United States)

    2004-01-01

    NASA's Mars Exploration Rover Spirit took this panoramic camera image of the rock target named 'Mazatzal' on sol 77 (March 22, 2004). It is a close-up look at the rock face and the targets that will be brushed and ground by the rock abrasion tool in upcoming sols. Mazatzal, like most rocks on Earth and Mars, has layers of material near its surface that provide clues about the history of the rock. Scientists believe that the top layer of Mazatzal is actually a coating of dust and possibly even salts. Under this light coating may be a more solid portion of the rock that has been chemically altered by weathering. Past this layer is the unaltered rock, which may give scientists the best information about how Mazatzal was formed. Because each layer reveals information about the formation and subsequent history of Mazatzal, it is important that scientists get a look at each of them. For this reason, they have developed a multi-part strategy to use the rock abrasion tool to systematically peel back Mazatzal's layers and analyze what's underneath with the rover's microscopic imager, and its Moessbauer and alpha particle X-ray spectrometers. The strategy began on sol 77 when scientists used the microscopic imager to get a closer look at targets on Mazatzal named 'New York,' 'Illinois' and 'Arizona.' These rock areas were targeted because they posed the best opportunity for successfully using the rock abrasion tool; Arizona also allowed for a close-up look at a range of tones. On sol 78, Spirit's rock abrasion tool will do a light brushing on the Illinois target to preserve some of the surface layers. Then, a brushing of the New York target should remove the top coating of any dust and salts and perhaps reveal the chemically altered rock underneath. Finally, on sol 79, the rock abrasion tool will be commanded to grind into the New York target, which will give scientists the best chance of observing Mazatzal's interior. The Mazatzal targets were named after the home states of

  2. Enhanced Hydrogen Storage Capacity over Electro-synthesized HKUST-1

    Directory of Open Access Journals (Sweden)

    Witri Wahyu Lestari

    2017-12-01

    Full Text Available HKUST-1 [Cu3(1,3,5-BTC2] (BTC = benzene-tri-carboxylate was synthesized using an electrochemical method and tested for hydrogen storage. The obtained material showed a remarkably higher hydrogen uptake over reported HKUST-1 and reached until 4.75 wt% at room temperature and low pressure up to 1.2 bar. This yield was compared to HKUST-1 obtained from the solvothermal method, which showed a hydrogen uptake of only 1.19 wt%. Enhancement of hydrogen sorption of the electro-synthesized product was due to the more appropriate surface area and pore size, effected by the preferable physical interaction between the hydrogen gasses and the copper ions as unsaturated metal centers in the frameworks of HKUST-1.

  3. Is Synthesizing MRI Contrast Useful for Inter-modality Analysis?

    DEFF Research Database (Denmark)

    Iglesias, Juan Eugenio; Konukoglu, Ender; Zikic, Darko

    2013-01-01

    , to what extent they can substitute real acquisitions in the respective analyses is an open question. In this study, we used a synthesis method based on patch matching to test whether synthetic images can be useful in segmentation and inter-modality cross-subject registration of brain MRI. Thirty-nine T1......Availability of multi-modal magnetic resonance imaging (MRI) databases opens up the opportunity to synthesize different MRI contrasts without actually acquiring the images. In theory such synthetic images have the potential to reduce the amount of acquisitions to perform certain analyses. However...... scans with 36 manually labeled structures of interest were used in the registration and segmentation of eight proton density (PD) scans, for which ground truth T1 data were also available. The results show that synthesized T1 contrast can considerably enhance the quality of non-linear registration...

  4. Method of synthesizing silica nanofibers using sound waves

    Science.gov (United States)

    Sharma, Jaswinder K.; Datskos, Panos G.

    2015-09-15

    A method for synthesizing silica nanofibers using sound waves is provided. The method includes providing a solution of polyvinyl pyrrolidone, adding sodium citrate and ammonium hydroxide to form a first mixture, adding a silica-based compound to the solution to form a second mixture, and sonicating the second mixture to synthesize a plurality of silica nanofibers having an average cross-sectional diameter of less than 70 nm and having a length on the order of at least several hundred microns. The method can be performed without heating or electrospinning, and instead includes less energy intensive strategies that can be scaled up to an industrial scale. The resulting nanofibers can achieve a decreased mean diameter over conventional fibers. The decreased diameter generally increases the tensile strength of the silica nanofibers, as defects and contaminations decrease with the decreasing diameter.

  5. Method of synthesizing silica nanofibers using sound waves

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Jaswinder K.; Datskos, Panos G.

    2017-08-08

    A method for synthesizing silica nanofibers using sound waves is provided. The method includes providing a solution of polyvinyl pyrrolidone, adding sodium citrate and ammonium hydroxide to form a first mixture, adding a silica-based compound to the solution to form a second mixture, and sonicating the second mixture to synthesize a plurality of silica nanofibers having an average cross-sectional diameter of less than 70 nm and having a length on the order of at least several hundred microns. The method can be performed without heating or electrospinning, and instead includes less energy intensive strategies that can be scaled up to an industrial scale. The resulting nanofibers can achieve a decreased mean diameter over conventional fibers. The decreased diameter generally increases the tensile strength of the silica nanofibers, as defects and contaminations decrease with the decreasing diameter.

  6. Studies on the Alkaloids of the Calycanthaceae and Their Syntheses

    Directory of Open Access Journals (Sweden)

    Jin-Biao Xu

    2015-04-01

    Full Text Available Plants of the Calycanthaceae family, which possesses four genera and about 15 species, are mainly distributed in China, North America and Australia. Chemical studies on the Calycanthaceae have led to the discovery of about 14 alkaloids of different skeletons, including dimeric piperidinoquinoline, dimeric pyrrolidinoindoline and/or trimeric pyrrolidinoindolines, which exhibit significant anti-convulsant, anti-fungal, anti-viral analgesic, anti-tumor, and anti-melanogenesis activities. As some of complex tryptamine-derived alkaloids exhibit promising biological activities, the syntheses of these alkaloids have also been a topic of interest in synthetic chemistry during the last decades. This review will focus on the structures and total syntheses of these alkaloids.

  7. Bactericidal effects of reactive thermal plasma synthesized titanium dioxide photocatalysts

    Energy Technology Data Exchange (ETDEWEB)

    Vijay, M [Plasma Physics Laboratory, Department of Physics, Bharathiar University, Coimbatore 641046 (India); Ananthapadmanabhan, P V; Sreekumar, K P [Laser and Plasma Technology Division, Bhabha Atomic Research Centre, Mumbai-400085 (India); Stengl, Vaclav [Institute of Inorganic Chemistry, AS CR, v.v.i., 250 68 Rez (Czech Republic); Bondioli, Federica [Dipartimento di Ingegneria dei Materiali e dell' Ambiente, Universita di Modena e Reggio Emilia, Via Vignolese 905 - 41100 Modena (Italy); Selvarajan, V, E-mail: vselvrjn47@rediffmail.co

    2010-02-01

    Nanocrystalline titanium oxide powder has been synthesized by reactive plasma processing. The precursor powder of TiH{sub 2} was oxidized 'in-flight' in a thermal plasma reactor to effect complete conversion of TiH{sub 2} to nano-sized TiO{sub 2} powder. Characterization of the powder by various analytical tools indicated that the powder consisted of nano-sized titanium dioxide particles consisting predominantly of the anatase phase. Bactericidal action of illuminated TiO{sub 2} on pure culture of Escherichia coli was studied. The plasma synthesized TiO{sub 2}nano powder catalyst was found to be highly effective for the killing of Escherichia coli. The efficiency of photocatalytic disinfection, used to inactivate Escherischia coli as function of time is discussed.

  8. Heart Rate Responses to Synthesized Affective Spoken Words

    Directory of Open Access Journals (Sweden)

    Mirja Ilves

    2012-01-01

    Full Text Available The present study investigated the effects of brief synthesized spoken words with emotional content on the ratings of emotions and heart rate responses. Twenty participants' heart rate functioning was measured while they listened to a set of emotionally negative, neutral, and positive words produced by speech synthesizers. At the end of the experiment, ratings of emotional experiences were also collected. The results showed that the ratings of the words were in accordance with their valence. Heart rate deceleration was significantly the strongest and most prolonged to the negative stimuli. The findings are the first suggesting that brief spoken emotionally toned words evoke a similar heart rate response pattern found earlier for more sustained emotional stimuli.

  9. Syntheses of Octasubstituted Metal Phthalocyanines for Nonlinear Optics

    Science.gov (United States)

    Guo, Huaisong; Townsend, Cheryl; Sanghadasa, Mohan; Amai, Robert L. S.; Clark, Ronald D.; Penn, Benjamin

    1998-01-01

    Many organic materials can be used as nonlinear optical media. Phthalocyanines are of special interest because they show an unusually large third order nonlinear response, they are thermally and photochemically stable and they can be formed into oriented thin films (Langmuir-Blodgett films). They also can be easily complexed by a large variety of metals, which place them at the interface between organics and organometallics, and allows for fine tuning of the macro cycle electronic properties by the coordinated metal and substituent groups. A series of 1,4,8,11,15,18,22,25-octaalkoxy metal-free and metal phthalocyanines and 2,3,9,10,16,17,23,24-octaalkoxy metal phthalocyanines has been synthesized. Their nonlinear optical properties have been measured. The physical properties of all the phthalocyanines synthesized in this work are subject to both acid and solvent effects.

  10. Is Ghrelin Synthesized in the Central Nervous System?

    Science.gov (United States)

    Cabral, Agustina; López Soto, Eduardo J; Epelbaum, Jacques; Perelló, Mario

    2017-03-15

    Ghrelin is an octanoylated peptide that acts via its specific receptor, the growth hormone secretagogue receptor type 1a (GHSR-1a), and regulates a vast variety of physiological functions. It is well established that ghrelin is predominantly synthesized by a distinct population of endocrine cells located within the gastric oxyntic mucosa. In addition, some studies have reported that ghrelin could also be synthesized in some brain regions, such as the hypothalamus. However, evidences of neuronal production of ghrelin have been inconsistent and, as a consequence, it is still as a matter of debate if ghrelin can be centrally produced. Here, we provide a comprehensive review and discussion of the data supporting, or not, the notion that the mammalian central nervous system can synthetize ghrelin. We conclude that no irrefutable and reproducible evidence exists supporting the notion that ghrelin is synthetized, at physiologically relevant levels, in the central nervous system of adult mammals.

  11. Quantitation of newly synthesized proteins by pulse labeling with azidohomoalanine.

    Science.gov (United States)

    Kramer, Gertjan; Kasper, Piotr T; de Jong, Luitzen; de Koster, Chris G

    2011-01-01

    Measuring protein synthesis and degradation rates on a proteomic scale is an important step toward modeling the kinetics in complicated cellular response networks. A gel-free method, able to quantify changes in the formation of new proteins on a 15 min timescale, compatible with mass spectrometry is described. The methionine analogue, azidohomoalanine (azhal), is used to label newly formed proteins during a short pulse-labeling period following an environmental switch in Escherichia coli. Following digestion a selective reaction against azhal-containing peptides is applied to enrich these peptides by diagonal chromatography. This technique enables quantitation of hundreds of newly synthesized proteins and provides insight into immediate changes in newly synthesized proteins on a proteomic scale after an environmental perturbation.

  12. Hydrothermally synthesized barium fluoride nanocubes for thermoluminescence dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    Bhadane, Mahesh S.; Dahiwale, S. S.; Bhoraskar, V. N.; Dhole, S. D., E-mail: sanjay@physics.unipune.ac.in [Department of Physics, Savitribai Phule Pune University, Pune-411007 (India)

    2016-05-23

    In this work, we report a hydrothermally synthesized Dy doped BaF{sub 2} (BaF{sub 2}:Dy) nanocubes and its Thermoluminescence studies. The synthesized BaF{sub 2}:Dy samples was found to posses FCC structure and having average size ~ 60-70 nm, as revealed through X-Ray Diffraction. Cubical morphology having size ~90 nm was observed from TEM analysis. The {sup 60}Co γ- ray irradiated BaF{sub 2}:Dy TL dosimetric experiments shows a pre-dominant single glow peak at 153 °C, indicating a single level trap present as a metastable state. Furthermore, BaF{sub 2}:Dy nanophosphor shows a sharp linear response from 10 Gy to 3 kGy, thus it can be applicable as a gamma dosimeter.

  13. Alumina lightweight ceramics modified with plasma synthesized nanopowders

    Science.gov (United States)

    Zake, I.; Svinka, R.; Svinka, V.; Palcevskis, E.

    2011-12-01

    The aim of this study is to clarify possibilities of using plasma synthesized Al2O3 and SiC nanopowders as additives in alumina lightweight ceramics prepared by slip casting. Each plasma synthesized nanopowder (PSNP) was incorporated in the material by a different method, because of their diverse influence on the properties of slip. Al2O3 PSNP was introduced in the matrix in form of aqueous suspension. SiC nanopowder was added directly to raw materials. Bending strength, bulk density, apparent porosity and thermal shock resistance were determined to evaluate the influence of these additives. The effect of Al2O3 PSNP addition on the properties of material depends on the initial sintering temperature. SiC particles during sintering oxidize into SiO2 and then in the reaction with alumina form mullite. Addition of SiC considerably improves bending strength and thermal shock resistance.

  14. Zr-doped SnO2 thin films synthesized by spray pyrolysis technique for barrier layers in solar cells

    Science.gov (United States)

    Reddy, N. Nanda Kumar; Akkera, Harish Sharma; Sekhar, M. Chandra; Park, Si-Hyun

    2017-12-01

    In the present work, we investigated the effect of Zr doping (0-6 at%) on the structural, electrical, and optical properties of tin oxide (SnO2) thin films deposited onto glass substrates using a spray pyrolysis technique. The room-temperature X-ray diffraction pattern shows that all deposited films exhibit polycrystalline tetragonal structure. The pure SnO2 film is grown along a preferred (200) direction, whereas Zr-doped SnO2 (Zr:SnO2) films started growing along the (220) orientation along with a high intensity peak of (200). Scanning electron microscope (SEM) and atomic force microscope (AFM) images showed that the grains of the films are spherical in structure, and the grain size decreased with increasing of Zr concentration. The optical transmission spectra of deposited films as a function of wavelength confirm that the average optical transmittance is > 85% for Zr:SnO2 films. The value of the optical bandgap is significantly decreased from 3.94 to 3.68 eV with increasing Zr concentration. Furthermore, the electrical measurements found that the sheet resistance ( R sh) and resistivity ( ρ) values are decreased with increasing of Zr doping. The lowest values of R sh = 6.82 Ω and ρ = 0.4 × 10- 3 Ω cm are found in 6-at% Zr-doped SnO2 film. In addition, a good efficiency value of the figure of merit ( ɸ = 3.35 × 10- 3 Ω-1) is observed in 6-at% Zr-doped SnO2 film. These outstanding properties of Zr-doped SnO2 films make them useful for several optoelectronic device applications.

  15. Bis(indolyl)methane alkaloids: Isolation, bioactivity, and syntheses

    Digital Repository Service at National Institute of Oceanography (India)

    Praveen, P.; Parameswaran, P.S.; Majik, M.S.

    from two molecules of indole and an aldehyde/ketone using acid or base catalyst. But for a large scale synthesis, the method should be environment - friendly and cost effective. Several syntheses of BIMs starting from harmful chemicals... summarises the novel catalysts employed,4 while a second review entitled “Synthetic approaches for BIMs” by Kaishap and Dohutia5 highlights the different synthetic approaches towards building the basic skeleton of bis(indolyl) methanes. Unfortunately...

  16. Synthesized Speech Quality Evaluation Using ITU-T P.563

    OpenAIRE

    Kraljevski, Ivan; Chungurski, Slavco; Stojanovic, Igor; Arsenovski, Sime

    2010-01-01

    In this paper a method for speech quality evaluation of TTS system is presented and its usability is assessed. The ITU-T P.563 is used as a reference-free objective measurement method for speech sequences synthesized by concatenative TTS system. The method was examined and the achieved results were compared to those measured by subjective auditory tests and their correlation values were observed. It was shown that this method is useful for automatic evaluation of synthetic speech quality afte...

  17. Biomimetic asymmetric total syntheses of spirooliganones A and B.

    Science.gov (United States)

    Song, Liyan; Yao, Hongliang; Tong, Rongbiao

    2014-07-18

    Biomimetic total syntheses of potent antiviral spirooliganones A and B were achieved with 3% and 2% yield, respectively, in 12 steps from commercially available materials. The synthetic strategy was inspired primarily by the biogenetic hypothesis and was enabled by two independent cascade events: (i) an unprecedented reaction involving aromatic Claisen rearrangement/o-quinone methide formation/hetero-Diels-Alder cycloaddition to construct the tetracyclic framework and (ii) phenol oxidative dearomatization/spirocyclization to build the spiro-fused cyclohexadienone/tetrahydrofuran moiety.

  18. Rapid hydrothermal route to synthesize cubic-phase gadolinium ...

    Indian Academy of Sciences (India)

    Administrator

    times, first with distilled water and then with ethanol, followed by oven-drying at 80 °C. Finally, the hydroxide powder was annealed at 600 °C, for 3 h so as to facilitate spontaneous decomposition of Gd(OH)3 and consequently, dehydration to yield Gd2O3 nanopowder. The flow chart of hydrothermally synthesized Gd2O3 ...

  19. Annual reports in inorganic and general syntheses 1973

    CERN Document Server

    Niedenzu, Kurt

    1974-01-01

    Annual Reports in Inorganic and General Syntheses-1973 presents an organized annual summary of synthetic developments in inorganic chemistry and its related areas. The book covers the synthetic aspects and structural or mechanistic features of elements, including the main group hydrides, alkali and alkaline earth elements, boron, aluminium, gallium, indium, thallium, silicon, germanium, tin, and lead, nitrogen, phosphorus, arsenic, antimony, bismuth, chalcogens, halogens and pseudohalogens, and noble gases. The text also discusses the synthetic aspects and structural or mechanistic features of

  20. Annual reports in inorganic and general syntheses 1974

    CERN Document Server

    Niedenzu, Kurt

    1975-01-01

    Annual Reports in Inorganic and General Syntheses-1974 presents an organized annual summary of synthetic developments in inorganic chemistry and its related areas. The book discusses the chemistry of simple and complex metal hydrides of main groups I, II, and III, boron, aluminium, gallium, indium, thallium, silicon, germanium, tin, lead, phosphorus, arsenic, antimony, bismuth, chalcogens, halogens, and pseudohalogens. The text also describes the chemistry of scandium, yttrium, lanthanides, actinides, titanium, zirconium, hafnium, vanadium, niobium, tantalum, chromium, molybdenum, tungsten, ma

  1. Annual reports in inorganic and general syntheses 1972

    CERN Document Server

    Niedenzu, Kurt

    1973-01-01

    Annual Reports in Inorganic and General Syntheses-1972 presents an organized annual summary of synthetic developments in inorganic chemistry and its related areas. The book discusses alkali and alkaline earth elements, alloys, silver, gold, zinc, cadmium, mercury, boron, aluminum, gallium, indium, thallium, yttrium, scandium, lanthanides, actinides, titanium, zirconium, hafnium, Group V and VI transition elements, manganese, technetium, rhenium, iron, cobalt, nickel, ruthenium, osmium, rhodium, and iridium. The text also describes the chemistry of palladium, platinum, silicon, germanium, tin,

  2. Syntheses and pyrolytic studies of salicylate derivatives of ...

    African Journals Online (AJOL)

    New salicylate derivatives of heteronucleic-μ-oxoisopropoxide [SnO2AlB(OPri)4] have been synthesized by the thermal condensation of μ-oxoisopropoxide and methyl/ethyl/phenyl/phenyl ethyl salicylates in different molar ratios (1:1-1:2) yielding the compounds of the type [SnO2AlB(OPri)4-n(RSAL)n] (where n is 1-2 and ...

  3. Generation of Clutter within a Structured Target Synthesizer

    Science.gov (United States)

    2012-09-01

    Digital Image Synthesizer, DIS, Inverse Synthetic Aperture Radar, ISAR, synthetic Aperture Radar, SAR, Digital RF Memory, DRFM 15. NUMBER OF PAGES 83...1  A.  ISAR AND DRFM JAMMING ......................................................................1  1.  ISAR...27  A.  CONTINUITY OF THE FALSE TARGET IN THE ISAR IMAGE .......27  B.  PULSE DIVERSITY WITH A DRFM PENALIZING ALGORITHM ...29  C.  CROSS-TRACK

  4. Can microcarrier-expanded chondrocytes synthesize cartilaginous tissue in vitro?

    Science.gov (United States)

    Surrao, Denver C; Khan, Aasma A; McGregor, Aaron J; Amsden, Brian G; Waldman, Stephen D

    2011-08-01

    Tissue engineering is a promising approach for articular cartilage repair; however, it is challenging to produce adequate amounts of tissue in vitro from the limited number of cells that can be extracted from an individual. Relatively few cell expansion methods exist without the problems of de-differentiation and/or loss of potency. Recently, however, several studies have noted the benefits of three-dimensional (3D) over monolayer expansion, but the ability of 3D expanded chondrocytes to synthesize cartilaginous tissue constructs has not been demonstrated. Thus, the purpose of this study was to compare the properties of engineered cartilage constructs from expanded cells (monolayer and 3D microcarriers) to those developed from primary chondrocytes. Isolated bovine chondrocytes were grown for 3 weeks in either monolayer (T-Flasks) or 3D microcarrier (Cytodex 3) expansion culture. Expanded and isolated primary cells were then seeded in high density culture on Millicell™ filters for 4 weeks to evaluate the ability to synthesize cartilaginous tissue. While microcarrier expansion was twice as effective as monolayer expansion (microcarrier: 110-fold increase, monolayer: 52-fold increase), the expanded cells (monolayer and 3D microcarrier) were not effectively able to synthesize cartilaginous tissue in vitro. Tissues developed from primary cells were substantially thicker and accumulated significantly more extracellular matrix (proteoglycan content: 156%-292% increase; collagen content: 70%-191% increase). These results were attributed to phenotypic changes experienced during the expansion phase. Monolayer expanded chondrocytes lost their native morphology within 1 week, whereas microcarrier-expanded cells were spreading by 3 weeks of expansion. While the use of 3D microcarriers can lead to large cellular yields, preservation of chondrogenic phenotype during expansion is required in order to synthesize cartilaginous tissue.

  5. Synthesizing Sierpinski Antenna by Genetic Algorithm and Swarm Optimization

    Directory of Open Access Journals (Sweden)

    Z. Raida

    2008-12-01

    Full Text Available The paper discusses the synthesis of the Sierpinski antenna operating at three prescribed frequencies: 0.9 GHz, 1.8 GHz (both GSM and 2.4 GHz (Bluetooth. In order to synthesize the antenna, a genetic algorithm and a particle swarm optimization were used. The numerical model of the antenna was developed in Zeland IE3D, optimization scripts were programmed in MATLAB. Results of both the optimization methods are compared and experimentally verified.

  6. Soft-Template-Synthesized Mesoporous Carbon for Oral Drug Delivery

    Energy Technology Data Exchange (ETDEWEB)

    Saha, Dipendu [ORNL; Warren, Kaitlyn E [ORNL; Naskar, Amit K [ORNL

    2014-01-01

    Template-synthesized mesoporous carbons were successfully used in in vitro investigations of controlled delivery of three model drugs, captopril, furosemide, and ranitidine hydrochloride. Captopril and furosemide exhibited desorption kinetics over 30 40 h, and ranitidine HCl had a complete release time of 5 10 h. As evident from the slow release kinetics, we contend that our mesoporous carbon is an improved drug-delivery medium compared to state-of-the-art porous silica-based substrates. The mesoporous carbons, synthesized from phloroglucinol and lignin, a synthetic and a sustainable precursor, respectively, exhibit BET surface area of 200 400 m2 g-1 and pore volume of 0.2 0.6 cm3 g-1. The phloroglucinol-based carbon has narrower pore widths and higher pore volume than the lignin-derived counterpart and maintains a longer release time. Numerical modeling of the release kinetics data reveals that the diffusivities of all the drugs from lignin-based carbon media are of equivalent magnitude (10-22 to 10-24 m2 s-1). However, a tailored reduction of pore width in the sorbent reduces the diffusivity of smaller drug molecules (captopril) by an order of magnitude. Thus, engineered pore morphology in our synthesized carbon sorbent, along with its potential to tailor the chemistry of its interaction with sorbet, can be exploited for optimal delivery system of a preferred drug within its therapeutic level and below the level of toxicity.

  7. Antibacterial properties of silver nanoparticles synthesized by marine Ochrobactrum sp.

    Science.gov (United States)

    Thomas, Roshmi; Janardhanan, Anju; Varghese, Rintu T; Soniya, E V; Mathew, Jyothis; Radhakrishnan, E K

    2014-01-01

    Metal nanoparticle synthesis is an interesting area in nanotechnology due to their remarkable optical, magnetic, electrical, catalytic and biomedical properties, but there needs to develop clean, non-toxic and environmental friendly methods for the synthesis and assembly of nanoparticles. Biological agents in the form of microbes have emerged up as efficient candidates for nanoparticle synthesis due to their extreme versatility to synthesize diverse nanoparticles with varying size and shape. In the present study, an eco favorable method for the biosynthesis of silver nanoparticles using marine bacterial isolate has been attempted. Very interestingly, molecular identification proved it as a strain of Ochrobactrum anhtropi. In addition, the isolate was found to have the potential to form silver nanoparticles intracellularly at room temperature within 24 h. The biosynthesized silver nanoparticles were characterized by UV-Vis spectroscopy, transmission electron microscope (TEM) and scanning electron microscope (SEM). The UV-visible spectrum of the aqueous medium containing silver nanoparticles showed a peak at 450 nm corresponding to the plasmon absorbance of silver nanoparticles. The SEM and TEM micrographs revealed that the synthesized silver nanoparticles were spherical in shape with a size range from 38 nm - 85 nm. The silver nanoparticles synthesized by the isolate were also used to explore its antibacterial potential against pathogens like Salmonella Typhi, Salmonella Paratyphi, Vibrio cholerae and Staphylococcus aureus.

  8. Antibacterial properties of silver nanoparticles synthesized by marine Ochrobactrum sp

    Science.gov (United States)

    Thomas, Roshmi; Janardhanan, Anju; Varghese, Rintu T.; Soniya, E.V.; Mathew, Jyothis; Radhakrishnan, E.K.

    2014-01-01

    Metal nanoparticle synthesis is an interesting area in nanotechnology due to their remarkable optical, magnetic, electrical, catalytic and biomedical properties, but there needs to develop clean, non-toxic and environmental friendly methods for the synthesis and assembly of nanoparticles. Biological agents in the form of microbes have emerged up as efficient candidates for nanoparticle synthesis due to their extreme versatility to synthesize diverse nanoparticles with varying size and shape. In the present study, an eco favorable method for the biosynthesis of silver nanoparticles using marine bacterial isolate has been attempted. Very interestingly, molecular identification proved it as a strain of Ochrobactrum anhtropi. In addition, the isolate was found to have the potential to form silver nanoparticles intracellularly at room temperature within 24 h. The biosynthesized silver nanoparticles were characterized by UV-Vis spectroscopy, transmission electron microscope (TEM) and scanning electron microscope (SEM). The UV-visible spectrum of the aqueous medium containing silver nanoparticles showed a peak at 450 nm corresponding to the plasmon absorbance of silver nanoparticles. The SEM and TEM micrographs revealed that the synthesized silver nanoparticles were spherical in shape with a size range from 38 nm – 85 nm. The silver nanoparticles synthesized by the isolate were also used to explore its antibacterial potential against pathogens like Salmonella Typhi, Salmonella Paratyphi, Vibrio cholerae and Staphylococcus aureus. PMID:25763025

  9. A new approach to synthesize supported ruthenium phosphides for hydrodesulfurization

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Qingfang [Tianjin Key Laboratory of Water Environment and Resources, Tianjin Normal University, Tianjin 300387 (China); Key Laboratory of Advanced Energy Materials Chemistry (MOE), Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), College of Chemistry, Nankai University, Tianjin 300071 (China); Wang, Zhiqiang [Tianjin Key Laboratory of Water Environment and Resources, Tianjin Normal University, Tianjin 300387 (China); Yin, Xiaoqian; Zhou, Linxi [Key Laboratory of Advanced Energy Materials Chemistry (MOE), Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), College of Chemistry, Nankai University, Tianjin 300071 (China); Zhang, Minghui, E-mail: zhangmh@nankai.edu.cn [Key Laboratory of Advanced Energy Materials Chemistry (MOE), Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), College of Chemistry, Nankai University, Tianjin 300071 (China); College of Chemistry and Environmental Science, Kashgar University, Kashgar 844006 (China)

    2016-02-15

    Highlights: • We bring out a new method to synthesize noble metal phosphides at low temperature. • Both RuP and Ru{sub 2}P were synthesized using triphenylphosphine as phosphorus sources. • Ru{sub 2}P was the better active phase for HDS than RuP and metal Ru. • RuP/SiO{sub 2} prepared by new method had better HDS activity to that by TPR method. - Abstract: Supported noble metal ruthenium phosphides were synthesized by one-step H{sub 2}-thermal treatment method using triphenylphosphine (TPP) as phosphorus sources at low temperatures. Two phosphides RuP and Ru{sub 2}P can be prepared by this method via varying the molar ratio of metal salt and TPP. The as-prepared phosphides were characterized by X-ray powder diffraction (XRD), low-temperature N{sub 2} adsorption, CO chemisorption and transmission electronic microscopy (TEM). The supported ruthenium phosphides prepared by new method and conventional method together with contradistinctive metallic ruthenium were evaluated in hydrodesulfurization (HDS) of dibenzothiophene (DBT). The catalytic results showed that metal-rich Ru{sub 2}P was the better active phase for HDS than RuP and metal Ru. Besides this, ruthenium phosphide catalyst prepared by new method exhibited superior HDS activity to that prepared by conventional method.

  10. Boundary-layer theory

    CERN Document Server

    Schlichting (Deceased), Hermann

    2017-01-01

    This new edition of the near-legendary textbook by Schlichting and revised by Gersten presents a comprehensive overview of boundary-layer theory and its application to all areas of fluid mechanics, with particular emphasis on the flow past bodies (e.g. aircraft aerodynamics). The new edition features an updated reference list and over 100 additional changes throughout the book, reflecting the latest advances on the subject.

  11. Layer 6 Corticothalamic Neurons Activate a Cortical Output Layer, Layer 5a

    Science.gov (United States)

    Kim, Juhyun; Matney, Chanel J.; Blankenship, Aaron; Hestrin, Shaul

    2014-01-01

    Layer 6 corticothalamic neurons are thought to modulate incoming sensory information via their intracortical axons targeting the major thalamorecipient layer of the neocortex, layer 4, and via their long-range feedback projections to primary sensory thalamic nuclei. However, anatomical reconstructions of individual layer 6 corticothalamic (L6 CT) neurons include examples with axonal processes ramifying within layer 5, and the relative input of the overall population of L6 CT neurons to layers 4 and 5 is not well understood. We compared the synaptic impact of L6 CT cells on neurons in layers 4 and 5. We found that the axons of L6 CT neurons densely ramified within layer 5a in both visual and somatosensory cortices of the mouse. Optogenetic activation of corticothalamic neurons generated large EPSPs in pyramidal neurons in layer 5a. In contrast, excitatory neurons in layer 4 exhibited weak excitation or disynaptic inhibition. Fast-spiking parvalbumin-positive cells in both layer 5a and layer 4 were also strongly activated by L6 CT neurons. The overall effect of L6 CT activation was to suppress layer 4 while eliciting action potentials in layer 5a pyramidal neurons. Together, our data indicate that L6 CT neurons strongly activate an output layer of the cortex. PMID:25031405

  12. Porous nitrogen-enriched carbonaceous material from marine waste: chitosan-derived layered CNX catalyst for aerial oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid

    Data.gov (United States)

    U.S. Environmental Protection Agency — Chitosan-derived, porous and layered nitrogen-enriched carbonaceous CNx catalyst (PLCNx) has been synthesized from marine waste and its use demonstrated in a...

  13. Influence of laser pulse frequency on the microstructure of aluminum nitride thin films synthesized by pulsed laser deposition

    Science.gov (United States)

    Antonova, K.; Duta, L.; Szekeres, A.; Stan, G. E.; Mihailescu, I. N.; Anastasescu, M.; Stroescu, H.; Gartner, M.

    2017-02-01

    Aluminum Nitride (AlN) thin films were synthesized on Si (100) wafers at 450 °C by pulsed laser deposition. A polycrystalline AlN target was multipulsed irradiated in a nitrogen ambient, at different laser pulse repetition rate. Grazing Incidence X-Ray Diffraction and Atomic Force Microscopy analyses evidenced nanocrystallites with a hexagonal lattice in the amorphous AlN matrix. The thickness and optical constants of the layers were determined by infrared spectroscopic ellipsometry. The optical properties were studied by Fourier Transform Infrared reflectance spectroscopy in polarised oblique incidence radiation. Berreman effect was observed around the longitudinal phonon modes of the crystalline AlN component. Angular dependence of the A1LO mode frequency was analysed and connected to the orientation of the particles' optical axis to the substrate surface normal. The role of the laser pulse frequency on the layers' properties is discussed on this basis.

  14. Novel layered Li3V2(PO4)3/rGO&C sheets as high-rate and long-life lithium ion battery cathodes.

    Science.gov (United States)

    Wei, Qiulong; Xu, Yanan; Li, Qidong; Tan, Shuangshuang; Ren, Wenhao; An, Qinyou; Mai, Liqiang

    2016-07-05

    Novel layered Li3V2(PO4)3/rGO&C sheets are synthesized by novel interfacial modified assembly, freeze-drying and confined annealing processes. The uniform LVP layers are alternated with rGO&C layers to form the composite layered structure, providing effective electron and ion transport. As a lithium-ion battery cathode, the composite displays excellent electrochemical performance.

  15. Facile preparation, optical and electrochemical properties of layer-by-layer V{sub 2}O{sub 5} quadrate structures

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yifu, E-mail: yfzhang@dlut.edu.cn; Zheng, Jiqi; Wang, Qiushi; Hu, Tao; Tian, Fuping; Meng, Changgong

    2017-03-31

    Highlights: • Layer-by-layer V{sub 2}O{sub 5} structures self-assembly by quadrate sheets like “multilayer cake” were synthesized. • Carbon spheres is as the structure-directing reagent like adhesive to guide the formation of layer-by-layer structures. • UV–vis spectrum shows two major absorption bands at about 340 and 478 nm and PL spectrum exhibits the emission peak at 545 nm for V{sub 2}O{sub 5} layer-by-layer structures. • The electrochemical properties of layer-by-layer V{sub 2}O{sub 5} structures are significantly improved in organic electrolyte. - Abstract: Layer-by-layer V{sub 2}O{sub 5} structures self-assembly by quadrate sheets like “multilayer cake” were successfully synthesized using NH{sub 4}VO{sub 3} as the vanadium sources by a facile hydrothermal route and combination of the calcination. The structure and composition were characterized by field emission scanning electron microscopy, energy-dispersive X-ray spectrometer, X-ray powder diffraction, Raman and Fourier transform infrared spectroscopy. The optical properties of the as-obtained V{sub 2}O{sub 5} layer-by-layer structures were investigated by the Ultraviolet–visible spectroscopy and photoluminescence spectrum. The electrochemical properties of the as-obtained V{sub 2}O{sub 5} layer-by-layer structures as electrodes in supercapacitor device were measured by cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) both in the aqueous and organic electrolyte. The specific capacitance is 347 F g{sup −1} at 1 A g{sup −1} in organic electrolyte, which is improved by 46% compared with 238 F g{sup −1} in aqueous electrolyte. During the cycle performance, the specific capacitances of V{sub 2}O{sub 5} layer-by-layer structures after 100 cycles are 30% and 82% of the initial discharge capacity in the aqueous and organic electrolyte, respectively, indicating the cycle performance is significantly improved in organic electrolyte. Our results turn out that layer-by-layer

  16. Tailoring  graphene layer-to-layer growth.

    Science.gov (United States)

    Li, Yongtao; Wu, Bin; Guo, Wei; Wang, Lifeng; Li, Jingbo; Liu, Yunqi

    2017-06-30

    A layered material grown between a substrate and the upper layer involves complex interactions and a confined reaction space, representing an unusual growth mode. Here, we show multi-layer graphene domains grown on liquid or solid Cu by the chemical vapor deposition method via this 'double-substrate' mode. We demonstrate the interlayer-induced coupling effect on the twist angle in bi- and multi-layer graphene. We discover dramatic growth disunity for different graphene layers, which is explained by the ideas of a chemical 'gate' and a material transport process within a confined space. These key results lead to a consistent framework for understanding the dynamic evolution of multi-layered graphene flakes and tailoring the layer-to-layer growth for practical applications.

  17. Graphene Substrate for van der Waals Epitaxy of Layer-Structured Bismuth Antimony Telluride Thermoelectric Film.

    Science.gov (United States)

    Kim, Eun Sung; Hwang, Jae-Yeol; Lee, Kyu Hyoung; Ohta, Hiromichi; Lee, Young Hee; Kim, Sung Wng

    2017-02-01

    Graphene as a substrate for the van der Waals epitaxy of 2D layered materials is utilized for the epitaxial growth of a layer-structured thermoelectric film. Van der Waals epitaxial Bi 0.5 Sb 1.5 Te 3 film on graphene synthesized via a simple and scalable fabrication method exhibits good crystallinity and high thermoelectric transport properties comparable to single crystals. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Designed nitrogen doping of few-layer graphene functionalized by selective oxygenic groups

    OpenAIRE

    Chen, Ying; Xie, Bingqiao; Ren, Yingtao; Yu, Mengying; Qu, Yang; Xie, Ting; Yong ZHANG; Wu, Yucheng

    2014-01-01

    Few-layer nitrogen doped graphene was synthesized originating from graphene oxide functionalized by selective oxygenic functional groups (hydroxyl, carbonyl, carboxyl etc.) under hydrothermal conditions, respectively. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) observation evidenced few-layer feature of the graphene oxide. X-ray diffraction (XRD) pattern confirmed phase structure of the graphene oxide and reduced graphene oxide. Nitrogen doping content and bonding...

  19. Substitution of conventional high-temperature syntheses of inorganic compounds by near-room-temperature syntheses in ionic liquids

    KAUST Repository

    Groh, Matthias Friedrich

    2013-01-01

    The high-temperature syntheses of the low-valent halogenides P2I4, Te2Br, α-Te4I4, Te4(Al2Cl7)2, Te4(Bi6Cl20), Te8(Bi4Cl14),Bi8(AlCl4)2, Bi6Cl7,and Bi6Br7, as well as of WSCl4 andWOCl4 have been replaced by resource-efficient low-temperature syntheses in room temperature ionic liquids (RTILs). The simple one-pot syntheses generally do not require elaborate equipment such as twozone furnaces or evacuated silica ampoules. Compared to the published conventional approaches, reduction of reaction time (up to 80%) and temperature (up to 500 K) and, simultaneously, an increase in yield were achieved. In the majority of cases, the solid products were phase-pure. X-Ray diffraction on single crystals (redetermination of 11 crystal structures) has demonstrated that the quality of the crystals from RTILs is comparable to that of products obtained by chemical transport reactions. © 2013 Verlag der Zeitschrift für Naturforschung, Tübingen.

  20. On the modeling of electrical boundary layer (electrode layer) and ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Earth System Science; Volume 119; Issue 1. On the modeling of electrical boundary layer (electrode layer) and derivation of atmospheric electrical profiles, eddy diffusion coeffcient and scales of electrode layer. Madhuri N Kulkarni. Volume 119 Issue 1 February 2010 pp 75-86 ...

  1. Tunable functionality and toxicity studies of titanium dioxide nanotube layers

    Energy Technology Data Exchange (ETDEWEB)

    Feschet-Chassot, E.; Raspal, V.; Sibaud, Y. [Clermont Universite, Universite d' Auvergne, C-BIOSENSS, BP 10448, F-63000 Clermont Ferrand (France); Awitor, O.K., E-mail: koawitor@iut.u-clermont1.f [Clermont Universite, Universite d' Auvergne, C-BIOSENSS, BP 10448, F-63000 Clermont Ferrand (France); Bonnemoy, F. [Clermont Universite, Universite Blaise Pascal, UMR CNRS 6023, LMGE, BP 10448, F-63000 Clermont Ferrand (France); Bonnet, J.L.; Bohatier, J. [Clermont Universite, Universite Blaise Pascal, UMR CNRS 6023, LMGE, BP 10448, F-63000 Clermont Ferrand (France); Clermont Universite, Universite d' Auvergne, Laboratoire de Biologie cellulaire, BP 10448, F-63000 Clermont Ferrand (France)

    2011-02-01

    In this study, we have developed a simple process to fabricate scalable titanium dioxide nanotube layers which show a tunable functionality. The titanium dioxide nanotube layers were prepared by electrochemical anodization of Ti foil in 0.4 wt.% hydrofluoric acid solution. The nanotube layers structure and morphology were characterized using X-ray diffraction and scanning electron microscopy. The surface topography and wettability were studied according to the anodization time. The sample synthesized displayed a higher contact angle while the current density reached a local minimum. Beyond this point, the contact angles decreased with anodization time. Photo-degradation of acid orange 7 in aqueous solution was used as a probe to assess the photocatalytic activity of titanium dioxide nanotube layers under UV irradiation. We obtained better photocatalytic activity for the sample fabricated at higher current density. Finally we used the Ciliated Protozoan T. pyriformis, an alternative cell model used for in vitro toxicity studies, to predict the toxicity of titanium dioxide nanotube layers in a biological system. We did not observe any characteristic effect in the presence of the titanium dioxide nanotube layers on two physiological parameters related to this organism, non-specific esterases activity and population growth rate.

  2. Generic approach for synthesizing asymmetric nanoparticles and nanoassemblies

    Science.gov (United States)

    Sun, Yugang; Hu, Yongxing

    2015-05-26

    A generic route for synthesis of asymmetric nanostructures. This approach utilizes submicron magnetic particles (Fe.sub.3O.sub.4--SiO.sub.2) as recyclable solid substrates for the assembly of asymmetric nanostructures and purification of the final product. Importantly, an additional SiO.sub.2 layer is employed as a mediation layer to allow for selective modification of target nanoparticles. The partially patched nanoparticles are used as building blocks for different kinds of complex asymmetric nanostructures that cannot be fabricated by conventional approaches. The potential applications such as ultra-sensitive substrates for surface enhanced Raman scattering (SERS) have been included.

  3. Chemical microsensors with molecularly imprinted sensitive layers

    Science.gov (United States)

    Dickert, Franz L.; Greibl, Wolfgang; Sikorski, Renatus; Tortschanoff, Matthias; Weber, K.; Bulst, W. E.; Fischerauer, G.

    1998-12-01

    The bottleneck in the development of chemical sensors is the design of the coatings for chemical recognition of the analyte. One pronounced method is to tailor supramolecular cavities for different analytes. Polyfunctional linkers or the embedding of these materials in a polymeric matrix can improve stability and response time of the sensor. An even more favorable method to synthesize chemically sensitive layers is realized by molecular imprinting, since a rigid polymer can be generated directly on the transducer of interest and may be included in its production process. The analyte of interest acts as a template during the polymerization process and is evaporated or extracted by suitable solvents. Due to the cavities formed this polymer enriches analyte molecules, which can be detected by mass- sensitive devices such as QMB or SAW resonators or by optical measurements. This procedure allows both the detection of polycyclic aromatic hydrocarbons (PAHs) with fluorescence or mass sensitive devices. If the print PAHs are varied the polymers are tuned to the desired analyte. The enrichment of solvent vapors or other uncolored specimen by the layer can also be followed by the embedding of carbenium ions used as optical labels.

  4. Radionuclide separations using pillared layered materials

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, N.C.; Wade, K.L.; Morgan, D.M. [and others

    1998-12-31

    This is the final report of a two-year Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Pillared Layered Materials (PLMs) are layered inorganic ion exchangers propped apart by metal oxide pillars. PLMs have been synthesized to sorb strontium from liquid nuclear wastes. A study that compared over 60 sorbers for their ability to sorb strontium from Hanford simulants showed that PLMs were the best sorbers; strontium distribution coefficients ({sup Sr}K{sub d}) > 20000 mL/g were obtained. In addition, PLMs showed a high degree of selectivity for strontium over cesium, transition metals, lanthanides and actinides. The sorption of strontium is, however, inhibited by complexants (EDTA); {sup Sr}K{sub d} values drop to <20 mL/g when they are present. The most promising PLMs were the Cr, Ti, Zr, and Si pillared tantalum tungstate. The K{sub d} values for Sr{sup 2+} and Ba{sup 2+} show a strong pH dependence; K{sub d} values increase to >10{sup 4} above pH 12. The general surface complexation mechanism explains the sorption of these cations on PLMs.

  5. Syntheses, Crystal Structures, Magnetic Behaviours, and Thermal Properties of Three Hydrogen-Bonding Networks Containing Dicyanamide and 4-Hydroxypyridine

    Directory of Open Access Journals (Sweden)

    Lingling Zheng

    2013-01-01

    Full Text Available Three new dicyanamide-bridged polymeric complexes of {[Mn(dca2(L2]·2H2O}n (1, {[Cd(dca2(L2]·2H2O}n (2, and {[Co(dca2(L2]2(L}n (3 (dca = dicyanamide, L = pyridinium-4-olate have been synthesized and structurally characterized. In the three compounds, the protons of hydroxyl groups of 4-hydroxypyridine transfer to pyridyl nitrogen atoms. Compounds 1 and 2 are isomorphous forming one-dimensional [M(dca2(L2]n chains where metals are connected by double dca anions. These one-dimensional chains are extended into two-dimensional layers through weak C–H⋯N hydrogen bonds. Further, these layers are assembled into a three-dimensional supramolecular network through N–H⋯O, O–H⋯O hydrogen bonds. Complex 3 is a coordination layer of (4, 4 topology with octahedral metal centers linked by four single μ1,5-bridges. These layers are interlocked by N–H⋯O, O–H⋯O hydrogen bonds from coordinated water molecules and free L molecules, which leads to a three-dimensional supramolecular architecture. The variable temperature magnetic susceptibilities measurement of compounds 1 and 3 shows the existence of weak antiferromagnetic interactions between the metal centers. The thermogravimetric analyses of the compounds 1–3 are also discussed.

  6. Layered double hydroxides

    DEFF Research Database (Denmark)

    López Rayo, Sandra; Imran, Ahmad; Hansen, Hans Chr. Bruun

    2017-01-01

    A novel zinc (Zn) fertilizer concept based on Zn doped layered double hydroxides (Zn-doped Mg-Fe-LDHs) has been investigated. Zn-doped Mg-Fe-LDHs were synthetized, their chemical composition was analyzed and their nutrient release was studied in buffered solutions with different pH values. Uptake...... the long-term Zn release capacity of LDHs complying with a release-on-demand behavior and serves as proof-of-concept that Zn-doped Mg-Fe-LDHs can be used as Zn fertilizers....

  7. Melting Layer Survey.

    Science.gov (United States)

    1983-08-12

    AFGL Melting Layer study was begun in 1979. Original plans called for a flight program and extensive radar studies. Budget problems and a change in the...etrstlr’nrL, ., (ot-i \\v! A ;uo. 1’.. ,ind (;u(,. V. . t1 97:10 1 inal 1, pov1 to NSIl 1-ide: Grint No. (1A-2!525. ( 5 Ne’% )ork, ppu 410-415. (1...1958) The hail problem , Nubila 1:11-96. (3) 98. Ludlam, R. H. (1980) Clouds and Storms, The Pennsylvania State University Press, University Park

  8. Layered Rocks in Ritchey

    Science.gov (United States)

    2004-01-01

    14 May 2004 This March 2004 Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows light- and dark-toned layered rock outcrops on the floor of Ritchey Crater, located near 28.9oS, 50.8oW. Some or all of these rocks may be sedimentary in origin. Erosion has left a couple of buttes standing on a more erosion-resistant plain. This picture covers an area approximately 3 km (1.9 mi) across and is illuminated by sunlight from the upper left.

  9. Cooperating systems: Layered MAS

    Science.gov (United States)

    Rochowiak, Daniel

    1990-01-01

    Distributed intelligent systems can be distinguished by the models that they use. The model developed focuses on layered multiagent system conceived of as a bureaucracy in which a distributed data base serves as a central means of communication. The various generic bureaus of such a system is described and a basic vocabulary for such systems is presented. In presenting the bureaus and vocabularies, special attention is given to the sorts of reasonings that are appropriate. A bureaucratic model has a hierarchy of master system and work group that organizes E agents and B agents. The master system provides the administrative services and support facilities for the work groups.

  10. Preparation and characterization of polymeric thin films containing gold nanoshells via electrostatic layer-by-layer self-assembly

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sang Ho; Jamison, Andrew C.; Hoffman, David M., E-mail: hoffman@uh.edu; Jacobson, Allan J., E-mail: ajjacob@uh.edu; Lee, T. Randall, E-mail: trlee@uh.edu

    2014-05-02

    As an initial step in the development of surfaces for collecting thermal energy, gold shell/silica core particles (∼ 200 nm in diameter with shells ∼ 25 nm thick) were synthesized and incorporated into organic polymeric thin films. The morphologies of these nanoshells were characterized with scanning and transmission electron microscopy. Powder X-ray diffraction demonstrated that the gold layers were highly crystalline. Thin films containing the gold nanoshells and polyethyleneimine were generated using dip-coating techniques based on electrostatic layer-by-layer self-assembly methods. Scanning electron microscopy was used to image the resultant composite films, which contained uniformly distributed gold nanoshells with limited aggregation. The optical properties were analyzed by absorption spectroscopy, revealing broad extinctions ranging from the visible to the near-IR spectral regions. X-ray photoelectron spectroscopy spectra were also obtained to determine the elements present and the oxidation states of these elements. - Highlights: • Prepared gold nanoshells with broad light absorption from visible to near IR. • Added the gold nanoshells to polyethyleneimine films via layer-by-layer assembly. • The resulting layered thin films exhibited minimal gold nanoshell aggregation.

  11. Three novel oligosaccharides synthesized using Thermoanaerobacter brockii kojibiose phosphorylase

    Directory of Open Access Journals (Sweden)

    Nishimoto Tomoyuki

    2007-06-01

    Full Text Available Abstract Background Recently synthesized novel oligosaccharides have been produced primarily by hydrolases and glycosyltransferases, while phosphorylases have also been subject of few studies. Indeed, phosphorylases are expected to give good results via their reversible reaction. The purpose of this study was to synthesis other novel oligosaccharides using kojibiose phosphorylase. Results Three novel oligosaccharides were synthesized by glucosyltransfer from β-D-glucose 1-phosphate (β-D-G1P to xylosylfructoside [O-α-D-xylopyranosyl-(1→2-β-D-fructofuranoside] using Thermoanaerobacter brockii kojibiose phosphorylase. These oligosaccharides were isolated using carbon-Celite column chromatography and preparative high performance liquid chromatography. Gas liquid chromatography analysis of methyl derivatives, MALDI-TOF MS and NMR measurements were used for structural characterisation. The 1H and 13C NMR signals of each saccharide were assigned using 2D-NMR including COSY (correlated spectroscopy, HSQC (herteronuclear single quantum coherence, CH2-selected E-HSQC (CH2-selected Editing-HSQC, HSQC-TOCSY (HSQC-total correlation spectroscopy and HMBC (heteronuclear multiple bond correlation. Conclusion The structure of three synthesized saccharides were determined, and these oligosaccharides have been identified as O-α-D-glucopyranosyl-(1→2-O-α-D-xylopyranosyl-(1→2-β-D-fructofuranoside (saccharide 1, O-α-D-glucopyranosyl-(1→2-O-α-D-glucopyranosyl-(1→2-O-α-D-xylopyranosyl-(1→2-β-D-fructofuranoside (saccharide 2 and O-α-D-glucopyranosyl-(1→[2-O-α-D-glucopyranosyl-1]2→2-O-α-D-xylopyranosyl-(1→2-β-D-fructofuranoside (saccharide 3.

  12. Three novel oligosaccharides synthesized using Thermoanaerobacter brockii kojibiose phosphorylase.

    Science.gov (United States)

    Takahashi, Natsuko; Fukushi, Eri; Onodera, Shuichi; Benkeblia, Noureddine; Nishimoto, Tomoyuki; Kawabata, Jun; Shiomi, Norio

    2007-06-28

    Recently synthesized novel oligosaccharides have been produced primarily by hydrolases and glycosyltransferases, while phosphorylases have also been subject of few studies. Indeed, phosphorylases are expected to give good results via their reversible reaction. The purpose of this study was to synthesis other novel oligosaccharides using kojibiose phosphorylase. Three novel oligosaccharides were synthesized by glucosyltransfer from beta-D-glucose 1-phosphate (beta-D-G1P) to xylosylfructoside [O-alpha-D-xylopyranosyl-(1-->2)-beta-D-fructofuranoside] using Thermoanaerobacter brockii kojibiose phosphorylase. These oligosaccharides were isolated using carbon-Celite column chromatography and preparative high performance liquid chromatography. Gas liquid chromatography analysis of methyl derivatives, MALDI-TOF MS and NMR measurements were used for structural characterisation. The 1H and 13C NMR signals of each saccharide were assigned using 2D-NMR including COSY (correlated spectroscopy), HSQC (herteronuclear single quantum coherence), CH2-selected E-HSQC (CH2-selected Editing-HSQC), HSQC-TOCSY (HSQC-total correlation spectroscopy) and HMBC (heteronuclear multiple bond correlation). The structure of three synthesized saccharides were determined, and these oligosaccharides have been identified as O-alpha-D-glucopyranosyl-(1-->2)-O-alpha-D-xylopyranosyl-(1-->2)-beta-D-fructofuranoside (saccharide 1), O-alpha-D-glucopyranosyl-(1-->2)-O-alpha-D-glucopyranosyl-(1-->2)-O-alpha-D-xylopyranosyl-(1-->2)-beta-D-fructofuranoside (saccharide 2) and O-alpha-D-glucopyranosyl-(1-->[2-O-alpha-D-glucopyranosyl-1]2-->2)-O-alpha-D-xylopyranosyl-(1-->2)-beta-D-fructofuranoside (saccharide 3).

  13. Engineering an Escherichia coli platform to synthesize designer biodiesels.

    Science.gov (United States)

    Wierzbicki, Michael; Niraula, Narayan; Yarrabothula, Akshitha; Layton, Donovan S; Trinh, Cong T

    2016-04-20

    Biodiesels, fatty acid esters (FAEs), can be synthesized by condensation of fatty acid acyl CoAs and alcohols via a wax ester synthase in living cells. Biodiesels have advantageous characteristics over petrodiesels such as biodegradability, a higher flash point, and less emission. Controlling fatty acid and alcohol moieties are critical to produce designer biodiesels with desirable physiochemical properties (e.g., high cetane number, low kinematic viscosity, high oxidative stability, and low cloud point). Here, we developed a flexible framework to engineer Escherichia coli cell factories to synthesize designer biodiesels directly from fermentable sugars. In this framework, we designed each FAE pathway as a biodiesel exchangeable production module consisting of acyl CoA, alcohol, and wax ester synthase submodules. By inserting the FAE modules in an engineered E. coli modular chassis cell, we generated E. coli cell factories to produce targeted biodiesels (e.g., fatty acid ethyl (FAEE) and isobutyl (FAIbE) esters) with tunable and controllable short-chain alcohol moieties. The engineered E. coli chassis carrying the FAIbE production module produced 54mg/L FAIbEs with high specificity, accounting for>90% of the total synthesized FAEs and ∼4.7 fold increase in FAIbE production compared to the wildtype. Fed-batch cultures further improved FAIbE production up to 165mg/L. By mixing ethanol and isobutanol submodules, we demonstrated controllable production of mixed FAEEs and FAIbEs. We envision the developed framework offers a flexible, alternative route to engineer designer biodiesels with tunable and controllable properties using biomass-derived fermentable sugars. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. Porous surface structure of biocompatible implants and tissue scaffolds base of titanium and nitinol synthesized SLS/M methods

    Science.gov (United States)

    Shishkovsky, I.; Sherbakov, V.; Petriv, A.; Kuznetsov, M.; Morozov, Yu.; Volova, L.; Barikov, I.; Fakeev, S.

    2007-06-01

    The objectives of these researches were to investigate the technical fundamentals of synthesizing high-strength biocompatible medical implants and tissue scaffolds made from nitinol or titanium using of Selective Laser Sintering/Melting (SLS/M). In particular, we had been identify the processing parameters and procedures necessary to successfully laser synthesize multi-material and functionally graded implants: the physical and mechanical properties, microstructure, and corrosion behavior of the resulting structures; the shape memory effect in porous layered nitinol structures made using laser synthesis. The comparative morphological and histological results of Selective Laser Sintering of porous titanium and nitinol implants are presented. Studies are conducted also on primary cultures of dermal fibroblasts and mesenchymal stromal human cells of the 4-18 passages. The principle possibility of long cultivating a bone marrow on the porous carrier-incubator from NiTi and titanium in vitro was determined. Sufficient understanding of laser synthesized titanium and nitinol structures to determine their suitability for future use as implants, resulting in superior tissue to implant fixation and minimally invasive surgical procedures, was developed.

  15. Bio-inspired routes for synthesizing efficient nanoscale platinum electrocatalysts

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Jennifer N. [Univ. of California, San Diego, CA (United States); Wang, Joseph [Univ. of California, San Diego, CA (United States)

    2014-08-31

    The overall objective of the proposed research is to use fundamental advances in bionanotechnology to design powerful platinum nanocrystal electrocatalysts for fuel cell applications. The new economically-viable, environmentally-friendly, bottom-up biochemical synthetic strategy will produce platinum nanocrystals with tailored size, shape and crystal orientation, hence leading to a maximum electrochemical reactivity. There are five specific aims to the proposed bio-inspired strategy for synthesizing efficient electrocatalytic platinum nanocrystals: (1) isolate peptides that both selectively bind particular crystal faces of platinum and promote the nucleation and growth of particular nanocrystal morphologies, (2) pattern nanoscale 2-dimensional arrays of platinum nucleating peptides from DNA scaffolds, (3) investigate the combined use of substrate patterned peptides and soluble peptides on nanocrystal morphology and growth (4) synthesize platinum crystals on planar and large-area carbon electrode supports, and (5) perform detailed characterization of the electrocatalytic behavior as a function of catalyst size, shape and morphology. Project Description and Impact: This bio-inspired collaborative research effort will address key challenges in designing powerful electrocatalysts for fuel cell applications by employing nucleic acid scaffolds in combination with peptides to perform specific, environmentally-friendly, simultaneous bottom-up biochemical synthesis and patterned assembly of highly uniform and efficient platinum nanocrystal catalysts. Bulk synthesis of nanoparticles usually produces a range of sizes, accessible catalytic sites, crystal morphologies, and orientations, all of which lead to inconsistent catalytic activities. In contrast, biological systems routinely demonstrate exquisite control over inorganic syntheses at neutral pH and ambient temperature and pressures. Because the orientation and arrangement of the templating biomolecules can be precisely

  16. Accurate simulation of Raman amplified lightwave synthesized frequency sweeper

    DEFF Research Database (Denmark)

    Pedersen, Anders Tegtmeier; Olesen, Anders Sig; Rottwitt, Karsten

    2011-01-01

    with constant peak power and no significant growth of noise. The numerical simulation is based on careful measurements of the physical properties of the individual components and a well established Raman amplifier model. Very good agreement between the measured and the simulated data is found. (C) 2011 Optical......A lightwave synthesized frequency sweeper using a Raman amplifier for loss compensation is presented together with a numerical model capable of predicting the shape of individual pulses as well as the overall envelope of more than 100 pulses. The generated pulse envelope consists of 116 pulses...

  17. Proposal of an Algorithm to Synthesize Music Suitable for Dance

    Science.gov (United States)

    Morioka, Hirofumi; Nakatani, Mie; Nishida, Shogo

    This paper proposes an algorithm for synthesizing music suitable for emotions in moving pictures. Our goal is to support multi-media content creation; web page design, animation films and so on. Here we adopt a human dance as a moving picture to examine the availability of our method. Because we think the dance image has high affinity with music. This algorithm is composed of three modules. The first is the module for computing emotions from an input dance image, the second is for computing emotions from music in the database and the last is for selecting music suitable for input dance via an interface of emotion.

  18. Characterization of Precipitated CaCO3 Synthesized from Dolomite

    Science.gov (United States)

    Arifin, Zaenal; Fitria Apriliani, Nurul; Zainuri, Mochamad; Darminto, dan

    2017-05-01

    The precipitated CaCO3 has successfully been synthesized from dolomite. The influence of various temperature and carbonation rate on the morphology, crystal size, phase and structure of the carbonation products were studied. The particles resulted from this process have the crystal size 400-800 nm. The calcite phase wasformed inthe synthesis at 30°C with carbonation rate of 2 and 7 SCFH, and synthesis at 80 °C and 2 SCFH also produces calcite phase. Observations by SEM shows morphology of calcite as so-called schalenohedral.

  19. Annual reports in inorganic and general syntheses 1976

    CERN Document Server

    Zimmer, Hans

    2013-01-01

    Annual Reports in Inorganic and General Syntheses-1976 presents an annual review of synthetically useful information that would prove beneficial to nearly all organic chemists, both specialist and nonspecialist in synthesis. It should help relieve some of the information storage burden of the specialist and should aid the nonspecialist who is seeking help with a specific problem to become rapidly aware of recent synthetic advances.This is the fifth volume of ARIGS and is organized along the lines developed for the preceding volumes. The authors were encouraged to use synthetic aspects as their

  20. TEM and AFM studies of aluminium nitride films synthesized by pulsed laser deposition

    Science.gov (United States)

    Fogarassy, Zs.; Petrik, P.; Duta, L.; Mihailescu, I. N.; Anastasescu, M.; Gartner, M.; Antonova, K.; Szekeres, A.

    2017-12-01

    Aluminium nitride (AlN) films were synthesized by pulsed laser ablation of poly-AlN target on Si(100) substrates using a KrF* excimer laser source ( λ = 248 nm, τ FWHM ≤ 25 ns), with incidence laser fluence of 3 J/cm2 and laser pulse repetition frequencies (LPF) of 3, 10 and 40 Hz, respectively. The depositions were performed in nitrogen pressure of 0.1 Pa and at substrate temperatures of 450 and 800 °C. The AlN structures were studied by transmission electron microscopy, atomic force microscopy (AFM), Fourier transform infrared reflectance (FTIR) spectroscopy and spectroscopic ellipsometry (SE) measurements. The results show that at 450 °C and LPF of 3 Hz the AlN film is entirely amorphous, while at LPF of 10 and 40 Hz nanocrystallites with h-AlN phase appear in the grown films. At 800 °C, well-textured h-AlN nanocrystallites with columnar grains are formed. Growth of nanocrystallites in the 450 °C AlN films, similar to films grown at 800 °C, is possible when the films are deposited onto a high-temperature AlN "seed" layer, as they follow the columnar structure but with small-sized crystallites and a weaker texturing. AFM imaging reveals increasing surface roughness with the degree of crystallinity in the synthesized films. The structural changes are well correlated with the variation in the optical parameters registered by FTIR and SE.

  1. Biological evaluation of zirconia/PEG hybrid materials synthesized via sol–gel technique

    Energy Technology Data Exchange (ETDEWEB)

    Catauro, M., E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Papale, F.; Bollino, F. [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Gallicchio, M.; Pacifico, S. [Department Environmental, Biological and Pharmaceutical Sciences and Technologies, Second University of Naples, Via Vivaldi 43, 81100 Caserta (Italy)

    2014-07-01

    The objective of the following study has been the synthesis via sol–gel and the characterization of novel organic–inorganic hybrid materials to be used in biomedical field. The prepared materials consist of an inorganic zirconia matrix containing as organic component the polyethylene glycol (PEG), a water-soluble polymer used in medical and pharmaceutical fields. Various hybrids have been synthesized changing the molar ratio between the organic and inorganic parts. Fourier transform spectroscopy suggests that the structure of the interpenetrating network is realized by hydrogen bonds between the Zr-OH group in the sol–gel intermediate species and both the terminal alcoholic group and ethereal oxygen atoms in the repeating units of polymer The amorphous nature of the gels has been ascertained by X-ray diffraction analysis. The morphology observation has been carried out by using the Scanning Electron Microscope and has confirmed that the obtained materials are nanostructurated hybrids. The bioactivity of the synthesized system has been shown by the formation of a hydroxyapatite layer on the surface of samples soaked in a fluid simulating the human blood plasma. The potential biocompatibility of hybrids has been assessed as performing indirect MTT cytotoxicity assay towards 3T3 cell line at 24, 48, and 72 h exposure times. - Highlights: • ZrO{sub 2}/PEG amorphous class I organic–inorganic hybrid synthesis via sol–gel • Bioactivity evaluation of materials by the formation of apatite on surface in SBF • Biocompatibility test with indirect MTT cytotoxicity assay on NHI 3T3 cell line.

  2. Optical properties of AlGaN nanowires synthesized via ion beam techniques

    Science.gov (United States)

    Parida, Santanu; Magudapathy, P.; Sivadasan, A. K.; Pandian, Ramanathaswamy; Dhara, Sandip

    2017-05-01

    AlGaN plays a vital role in hetero-structure high electron mobility transistors by employing a two-dimensional electron gas as an electron blocking layer in multi-quantum well light emitting diodes. Nevertheless, the incorporation of Al into GaN for the formation of the AlGaN alloy is limited by the diffusion barrier formed by instant nitridation of Al adatoms by reactive atomic N. The incorporation of Al above the miscibility limit, however, can be achieved by the ion beam technique. The well known ion beam mixing (IBM) technique was carried out with the help of Ar+ irradiation for different fluences. A novel approach was also adopted for the synthesis of AlGaN by the process of post-irradiation diffusion (PID) as a comparative study with the IBM technique. The optical investigations of AlGaN nanowires, synthesized via two different methods of ion beam processing, are reported. The effect of irradiation fluence and post-irradiation annealing temperature on the random alloy formation was studied by the vibrational and photoluminescence (PL) spectroscopic studies. Vibrational studies show one-mode phonon behavior corresponding to the longitudinal optical (LO) mode of A1 symmetry [A1(LO)] for the wurtzite phase of AlGaN nanowires in the random alloy model. A maximum Al atomic percentage of ˜6.3%-6.7% was calculated with the help of band bowing formalism from the Raman spectral analysis for samples synthesized in IBM and PID processes. PL studies show the extent of defects present in these samples.

  3. Multiresonant layered plasmonic films

    Energy Technology Data Exchange (ETDEWEB)

    DeVetter, Brent M. [Pacific Northwest National Laboratory, Richland, Washington, United States; Bernacki, Bruce E. [Pacific Northwest National Laboratory, Richland, Washington, United States; Bennett, Wendy D. [Pacific Northwest National Laboratory, Richland, Washington, United States; Schemer-Kohrn, Alan [Pacific Northwest National Laboratory, Richland, Washington, United States; Alvine, Kyle J. [Pacific Northwest National Laboratory, Richland, Washington, United States

    2017-01-01

    Multi-resonant nanoplasmonic films have numerous applications in areas such as nonlinear optics, sensing, and tamper indication. While techniques such as focused ion beam milling and electron beam lithography can produce high-quality multi-resonant films, these techniques are expensive, serial processes that are difficult to scale at the manufacturing level. Here, we present the fabrication of multi-resonant nanoplasmonic films using a layered stacking technique. Periodically-spaced gold nanocup substrates were fabricated using self-assembled polystyrene nanospheres followed by oxygen plasma etching and metal deposition via magnetron sputter coating. By adjusting etch parameters and initial nanosphere size, it was possible to achieve an optical response ranging from the visible to the near-infrared. Singly resonant, flexible films were first made by performing peel-off using an adhesive-coated polyolefin film. Through stacking layers of the nanofilm, we demonstrate fabrication of multi-resonant films at a fraction of the cost and effort as compared to top-down lithographic techniques.

  4. Copper(II) Schiff base complexes and their mixed thin layers with ...

    Indian Academy of Sciences (India)

    the possibility of using the spin coating technique for deposition of the copper(II) complexes and ZnO nanoparticles on different substrates and the likely flu- orescence behavior of the obtained layers, prompted us to synthesize a series of new copper(II) complexes with. Schiff bases derived from ethylenediamine and several.

  5. Hydrothermal Synthesis and Characterization of 3R Polytypes of Mg-Al Layered Double Hydroxides

    NARCIS (Netherlands)

    Budhysutanto, W.N.

    2010-01-01

    Layered Double Hydroxides (LDH) is a unique group of clays that have an anionic exchange capability. This research explored the hydrothermal method as an alternative method to synthesize Mg-Al LDH. It is a simple and more environmentally friendly compared to the conventional method of

  6. Sharpening the VNIR and SWIR Bands of Sentinel-2A Imagery through Modified Selected and Synthesized Band Schemes

    Directory of Open Access Journals (Sweden)

    Honglyun Park

    2017-10-01

    Full Text Available In this work, the bands of a Sentinel-2A image with spatial resolutions of 20 m and 60 m are sharpened to a spatial resolution of 10 m to obtain visible and near-infrared (VNIR and shortwave infrared (SWIR spectral bands with a spatial resolution of 10 m. In particular, we propose a two-step sharpening algorithm for Sentinel-2A imagery based on modified, selected, and synthesized band schemes using layer-stacked bands to sharpen Sentinel-2A images. The modified selected and synthesized band schemes proposed in this study extend the existing band schemes for sharpening Sentinel-2A images with spatial resolutions of 20 m and 60 m to improve the pan-sharpening accuracy by changing the combinations of bands used for multiple linear regression analysis through band-layer stacking. The proposed algorithms are applied to the pan-sharpening algorithm based on component substitution (CS and a multiresolution analysis (MRA, and our results are then compared to the sharpening results when using sharpening algorithms based on existing band schemes. The experimental results show that the sharpening results from the proposed algorithm are improved in terms of the spatial and spectral properties when compared to existing methods. However, the results of the sharpening algorithm when applied to our modified band schemes show differing tendencies. With the modified, selected band scheme, the sharpening result when applying the CS-based algorithm is higher than the result when applying the MRA-based algorithm. However, the quality of the sharpening results when using the MRA-based algorithm with the modified synthesized band scheme is higher than that when using the CS-based algorithm.

  7. Metal deposition using seed layers

    Science.gov (United States)

    Feng, Hsein-Ping; Chen, Gang; Bo, Yu; Ren, Zhifeng; Chen, Shuo; Poudel, Bed

    2013-11-12

    Methods of forming a conductive metal layers on substrates are disclosed which employ a seed layer to enhance bonding, especially to smooth, low-roughness or hydrophobic substrates. In one aspect of the invention, the seed layer can be formed by applying nanoparticles onto a surface of the substrate; and the metallization is achieved by electroplating an electrically conducting metal onto the seed layer, whereby the nanoparticles serve as nucleation sites for metal deposition. In another approach, the seed layer can be formed by a self-assembling linker material, such as a sulfur-containing silane material.

  8. Analysis of turbulent boundary layers

    CERN Document Server

    Cebeci, Tuncer

    1974-01-01

    Analysis of Turbulent Boundary Layers focuses on turbulent flows meeting the requirements for the boundary-layer or thin-shear-layer approximations. Its approach is devising relatively fundamental, and often subtle, empirical engineering correlations, which are then introduced into various forms of describing equations for final solution. After introducing the topic on turbulence, the book examines the conservation equations for compressible turbulent flows, boundary-layer equations, and general behavior of turbulent boundary layers. The latter chapters describe the CS method for calculati

  9. Photothermal stability of biologically and chemically synthesized gold nanoprisms

    Science.gov (United States)

    Klekotko, Magdalena; Olesiak-Banska, Joanna; Matczyszyn, Katarzyna

    2017-10-01

    We report here the influence of the irradiation with femtosecond laser pulses on the gold nanoprisms synthesized using biological and chemical methods. For the bio-mediated growth, we used plant extract as a source of reducing, structure-directing, and stabilizing agents, while for the chemical method, we applied three-step protocol, involving chemicals commonly used in the synthesis of nanostructures. Exposition of the nanostructures to the laser beam causes morphological changes, which affect their extinction spectra. These modifications were followed using absorption spectroscopy and transmission electron microscopy. The observed effects depend on the applied laser power and excitation wavelength. Under resonance conditions, rounding of the tips of triangular nanoparticles and transformation towards more stable, spherical form were noticed. These changes were faster under higher laser power. Such shape modifications were weaker under off-resonance conditions. Moreover, chemically synthesized gold nanoprisms were less susceptible to the morphological changes than those obtained using plant extract; however, their colloidal stability was disrupted by long-time irradiation. [Figure not available: see fulltext.

  10. Synthesizing Iron Oxide Nanostructures: The Polyethylenenemine (PEI) Role

    KAUST Repository

    Mozo, Sergio Lentijo

    2017-01-12

    Controlled synthesis of anisotropic iron oxide nanoparticles is a challenge in the field of nanomaterial research that requires an extreme attention to detail. In particular, following up a previous work showcasing the synthesis of magnetite nanorods (NRs) using a two-step approach that made use of polyethylenenemine (PEI) as a capping ligand to synthesize intermediate β-FeOOH NRs, we studied the effect and influence of the capping ligand on the formation of β-FeOOH NRs. By comparing the results reported in the literature with those we obtained from syntheses performed (1) in the absence of PEI or (2) by using PEIs with different molecular weight, we showed how the choice of different PEIs determines the aspect ratio and the structural stability of the β-FeOOH NRs and how this affects the final products. For this purpose, a combination of XRD, HRTEM, and direct current superconducting quantum interference device (DC SQUID) magnetometry was used to identify the phases formed in the final products and study their morphostructural features and related magnetic behavior.

  11. Synthesizing Iron Oxide Nanostructures: The Polyethylenenemine (PEI Role

    Directory of Open Access Journals (Sweden)

    Sergio Lentijo Mozo

    2017-01-01

    Full Text Available Controlled synthesis of anisotropic iron oxide nanoparticles is a challenge in the field of nanomaterial research that requires an extreme attention to detail. In particular, following up a previous work showcasing the synthesis of magnetite nanorods (NRs using a two-step approach that made use of polyethylenenemine (PEI as a capping ligand to synthesize intermediate β-FeOOH NRs, we studied the effect and influence of the capping ligand on the formation of β-FeOOH NRs. By comparing the results reported in the literature with those we obtained from syntheses performed (1 in the absence of PEI or (2 by using PEIs with different molecular weight, we showed how the choice of different PEIs determines the aspect ratio and the structural stability of the β-FeOOH NRs and how this affects the final products. For this purpose, a combination of XRD, HRTEM, and direct current superconducting quantum interference device (DC SQUID magnetometry was used to identify the phases formed in the final products and study their morphostructural features and related magnetic behavior.

  12. Dynamic balancing of mechanisms and synthesizing of parallel robots

    CERN Document Server

    Wei, Bin

    2016-01-01

    This book covers the state-of-the-art technologies in dynamic balancing of mechanisms with minimum increase of mass and inertia. The synthesis of parallel robots based on the Decomposition and Integration concept is also covered in detail. The latest advances are described, including different balancing principles, design of reactionless mechanisms with minimum increase of mass and inertia, and synthesizing parallel robots. This is an ideal book for mechanical engineering students and researchers who are interested in the dynamic balancing of mechanisms and synthesizing of parallel robots. This book also: ·       Broadens reader understanding of the synthesis of parallel robots based on the Decomposition and Integration concept ·       Reinforces basic principles with detailed coverage of different balancing principles, including input torque balancing mechanisms ·       Reviews exhaustively the key recent research into the design of reactionless mechanisms with minimum increase of mass a...

  13. Global Mental Health: sharing and synthesizing knowledge for sustainable development.

    Science.gov (United States)

    O'Donnell, K; O'Donnell, M Lewis

    2016-01-01

    Global mental health (GMH) is a growing domain with an increasing capacity to positively impact the world community's efforts for sustainable development and wellbeing. Sharing and synthesizing GMH and multi-sectoral knowledge, the focus of this paper, is an important way to support these global efforts. This paper consolidates some of the most recent and relevant 'context resources' [global multi-sector (GMS) materials, emphasizing world reports on major issues] and 'core resources' (GMH materials, including newsletters, texts, conferences, training, etc.). In addition to offering a guided index of materials, it presents an orientation framework (global integration) to help make important information as accessible and useful as possible. Mental health colleagues are encouraged to stay current in GMH and global issues, to engage in the emerging agendas for sustainable development and wellbeing, and to intentionally connect and contribute across sectors. Colleagues in all sectors are encouraged to do likewise, and to take advantage of the wealth of shared and synthesized knowledge in the GMH domain, such as the materials featured in this paper.

  14. Safety evaluation of an enzymatically-synthesized glycogen (ESG).

    Science.gov (United States)

    Tafazoli, Shahrzad; Wong, Andrea W; Kajiura, Hideki; Kakutani, Ryo; Furuyashiki, Takashi; Takata, Hiroki; Kuriki, Takashi

    2010-01-01

    An enzymatically-synthesized glycogen (ESG), intended for use as a food ingredient, was investigated for potential toxicity. ESG is synthesized in vitro from short-chain amylose by the co-operative action of branching enzyme and amylomaltase. In an acute toxicity study, oral administration of ESG to Sprague-Dawley rats at a dose of 2000 mg/kg body weight did not result in any signs of toxicity. ESG did not exhibit mutagenic activity in an in vitro bacterial reverse mutation assay. In a subchronic toxicity study, increased cecal weights noted in the mid- (10%) and high-dose (30%) animals are common findings in rodents fed excess amounts of carbohydrates that increase osmotic value of the cecal contents, and thus were considered a physiological rather than toxicological response. The hematological and histopathological effects observed in the high-dose groups were of no toxicological concern as they were secondary to the physiological responses resulting from the high carbohydrate levels in the test diets. The no-observed-adverse-effect level for ESG in rats was therefore established to be 30% in the diet (equivalent to approximately 18 and 21 g/kg body weight/day for male and female rats, respectively). These results support the safety of ESG as a food ingredient for human consumption. Copyright 2010 Elsevier Inc. All rights reserved.

  15. Method of synthesized phase objects for pattern recognition: matched filtering.

    Science.gov (United States)

    Yezhov, Pavel V; Kuzmenko, Alexander V; Kim, Jin-Tae; Smirnova, Tatiana N

    2012-12-31

    To solve the pattern recognition problem, a method of synthesized phase objects is suggested. The essence of the suggested method is that synthesized phase objects are used instead of real amplitude objects. The former is object-dependent phase distributions calculated using the iterative Fourier-transform (IFT) algorithm. The method is experimentally studied with a Vander Lugt optical-digital 4F-correlator. We present the comparative analysis of recognition results using conventional and proposed methods, estimate the sensitivity of the latter to distortions of the structure of objects, and determine the applicability limits. It is demonstrated that the proposed method allows one: (а) to simplify the procedure of choice of recognition signs (criteria); (b) to obtain one-type δ-like recognition signals irrespective of the type of objects; (с) to improve signal-to-noise ratio (SNR) for correlation signals by 20 - 30 dB on average. The spatial separation of the Fourier-spectra of objects and optical noises of the correlator by means of the superposition of the phase grating on recognition objects at the recording of holographic filters and at the matched filtering has additionally improved SNR (>10 dB) for correlation signals. To introduce recognition objects in the correlator, we use a SLM LC-R 2500 device. Matched filters are recorded on a self-developing photopolymer.

  16. Thermoresponsive and Reducible Hyperbranched Polymers Synthesized by RAFT Polymerisation

    Directory of Open Access Journals (Sweden)

    Anna Tochwin

    2017-09-01

    Full Text Available Here, we report the synthesis of new thermoresponsive hyperbranched polymers (HBPs via one-pot reversible addition-fragmentation chain transfer (RAFT copolymerisation of poly(ethylene glycolmethyl ether methacrylate (PEGMEMA, Mn = 475 g/mol, poly(propylene glycolmethacrylate (PPGMA, Mn = 375 g/mol, and disulfide diacrylate (DSDA using 2-cyanoprop-2-yl dithiobenzoate as a RAFT agent. DSDA was used as the branching agent and to afford the HBPs with reducible disulfide groups. The resulting HBPs were characterised by Nuclear Magnetic Resonance Spectroscopy (NMR and Gel Permeation Chromatography (GPC. Differential Scanning Calorimetry (DSC was used to determine lower critical solution temperatures (LCSTs of these copolymers, which are in the range of 17–57 °C. Moreover, the studies on the reducibility of HBPs and swelling behaviours of hydrogels synthesized from these HBPs were conducted. The results demonstrated that we have successfully synthesized hyperbranched polymers with desired dual responsive (thermal and reducible and crosslinkable (via thiol-ene click chemistry properties. In addition, these new HBPs carry the multiplicity of reactive functionalities, such as RAFT agent moieties and multivinyl functional groups, which can afford them with the capacity for further bioconjugation and structure modifications.

  17. In Situ XRD Investigations on Structural Change of P2-Layered Materials during Electrochemical Sodiation/Desodiation

    DEFF Research Database (Denmark)

    Jung, Young Hwa; Johnsen, Rune E.; Christiansen, Ane Sælland

    2014-01-01

    , the initial layered structure is maintained from 2.0 to 4.0 V vs. Na+/Na during first desodiation. The phase transformation is observed over the 4.0 V, but the original P2 structure is completely restored at the following sodiation process. The relationship between structural and electrochemical properties......; as a result, rich experiences for structural studies of O3-layered compounds have been accumulated over the past decades. For sodium layered oxides, however, P2-layered compounds have been reported for better cyclability and structural stability during electrochemical reactions than O3-structure. Therefore......, systematic studies on P2-layered materials for SIBs are highly required. In this study, we report the structural and electrochemical property of P2-NaxFeyMnyCo1-2yO2 synthesized by simple solid state reaction. The X-ray diffraction pattern of as-synthesized powder is indexed as a hexagonal lattice (P63/mmc...

  18. Effect of processing parameters on microstructure of MoS2 ultra-thin films synthesized by chemical vapor deposition method

    Directory of Open Access Journals (Sweden)

    Yang Song

    2015-06-01

    Full Text Available MoS2 ultra-thin layers are synthesized using a chemical vapor deposition method based on the sulfurization of molybdenum trioxide (MoO3. The ultra-thin layers are characterized by X-ray diffraction (XRD, photoluminescence (PL spectroscopy and atomic force microscope (AFM. Based on our experimental results, all the processing parameters, such as the tilt angle of substrate, applied voltage, heating time and the weight of source materials have effect on the microstructures of the layers. In this paper, the effects of such processing parameters on the crystal structures and morphologies of the as-grown layers are studied. It is found that the film obtained with the tilt angle of 0.06° is more uniform. A larger applied voltage is preferred to the growth of MoS2 thin films at a certain heating time. In order to obtain the ultra-thin layers of MoS2, the weight of 0.003 g of source materials is preferred. Under our optimal experimental conditions, the surface of the film is smooth and composed of many uniformly distributed and aggregated particles, and the ultra-thin MoS2 atomic layers (1∼10 layers covers an area of more than 2 mm×2 mm.

  19. Wireless physical layer security

    Science.gov (United States)

    Poor, H. Vincent; Schaefer, Rafael F.

    2017-01-01

    Security in wireless networks has traditionally been considered to be an issue to be addressed separately from the physical radio transmission aspects of wireless systems. However, with the emergence of new networking architectures that are not amenable to traditional methods of secure communication such as data encryption, there has been an increase in interest in the potential of the physical properties of the radio channel itself to provide communications security. Information theory provides a natural framework for the study of this issue, and there has been considerable recent research devoted to using this framework to develop a greater understanding of the fundamental ability of the so-called physical layer to provide security in wireless networks. Moreover, this approach is also suggestive in many cases of coding techniques that can approach fundamental limits in practice and of techniques for other security tasks such as authentication. This paper provides an overview of these developments.

  20. The layers of subtitling

    Directory of Open Access Journals (Sweden)

    Elena Di Giovanni

    2016-12-01

    Full Text Available The study of subtitling, although widely practiced over the past 20 years, has generally been confined to comparative studies focusing on the product of subtitle translation, with little or no consideration of the conditions of creation and reception. Focusing on the process of subtitle production, occasional studies have touched upon the cognitive processes accompanying it, but no study so far has related these processes, and the resulting products, to various degrees of translators’ competence. This is precisely what this essay does, focusing on the different layers of subtitle translation provided for two different films and in two different contexts. By analysing the first and second versions of subtitle translations, we shall reflect on the acquisition, and application, of different subtitling competences.

  1. Layered double hydroxides

    DEFF Research Database (Denmark)

    López Rayo, Sandra; Imran, Ahmad; Hansen, Hans Chr. Bruun

    2017-01-01

    A novel zinc (Zn) fertilizer concept based on Zn doped layered double hydroxides (Zn-doped Mg-Fe-LDHs) has been investigated. Zn-doped Mg-Fe-LDHs were synthetized, their chemical composition was analyzed and their nutrient release was studied in buffered solutions with different pH values. Uptake...... of Zn by barley (Hordeum vulgare cv. Antonia) was evaluated in short- (8 weeks), medium- (11 weeks) and long-term (28 weeks) experiments in quartz sand and in a calcareous soil enriched with Zn-doped Mg-Fe-LDHs. The Zn release rate of the Zn-doped Mg-Fe-LDHs was described by a first-order kinetics...

  2. Templated, layered manganese phosphate

    Science.gov (United States)

    Thoma, Steven G.; Bonhomme, Francois R.

    2004-08-17

    A new crystalline maganese phosphate composition having an empirical formula: O). The compound was determined to crystallize in the trigonal space group P-3c1 with a=8.8706(4) .ANG., c=26.1580(2) .ANG., and V (volume)=1783 .ANG..sup.3. The structure consists of sheets of corner sharing Mn(II)O.sub.4 and PO.sub.4 tetrahedra with layers of (H.sub.3 NCH.sub.2 CH.sub.2).sub.3 N and water molecules in-between. The pronated (H.sub.3 NCH.sub.2 CH.sub.2).sub.3 N molecules provide charge balancing for the inorganic sheets. A network of hydrogen bonds between water molecules and the inorganic sheets holds the structure together.

  3. Wireless physical layer security.

    Science.gov (United States)

    Poor, H Vincent; Schaefer, Rafael F

    2017-01-03

    Security in wireless networks has traditionally been considered to be an issue to be addressed separately from the physical radio transmission aspects of wireless systems. However, with the emergence of new networking architectures that are not amenable to traditional methods of secure communication such as data encryption, there has been an increase in interest in the potential of the physical properties of the radio channel itself to provide communications security. Information theory provides a natural framework for the study of this issue, and there has been considerable recent research devoted to using this framework to develop a greater understanding of the fundamental ability of the so-called physical layer to provide security in wireless networks. Moreover, this approach is also suggestive in many cases of coding techniques that can approach fundamental limits in practice and of techniques for other security tasks such as authentication. This paper provides an overview of these developments.

  4. Ozone Layer Observations

    Science.gov (United States)

    McPeters, Richard; Bhartia, P. K. (Technical Monitor)

    2002-01-01

    The US National Aeronautics and Space Administration (NASA) has been monitoring the ozone layer from space using optical remote sensing techniques since 1970. With concern over catalytic destruction of ozone (mid-1970s) and the development of the Antarctic ozone hole (mid-1980s), long term ozone monitoring has become the primary focus of NASA's series of ozone measuring instruments. A series of TOMS (Total Ozone Mapping Spectrometer) and SBUV (Solar Backscatter Ultraviolet) instruments has produced a nearly continuous record of global ozone from 1979 to the present. These instruments infer ozone by measuring sunlight backscattered from the atmosphere in the ultraviolet through differential absorption. These measurements have documented a 15 Dobson Unit drop in global average ozone since 1980, and the declines in ozone in the antarctic each October have been far more dramatic. Instruments that measure the ozone vertical distribution, the SBUV and SAGE (Stratospheric Aerosol and Gas Experiment) instruments for example, show that the largest changes are occurring in the lower stratosphere and upper troposphere. The goal of ozone measurement in the next decades will be to document the predicted recovery of the ozone layer as CFC (chlorofluorocarbon) levels decline. This will require a continuation of global measurements of total column ozone on a global basis, but using data from successor instruments to TOMS. Hyperspectral instruments capable of measuring in the UV will be needed for this purpose. Establishing the relative roles of chemistry and dynamics will require instruments to measure ozone in the troposphere and in the stratosphere with good vertical resolution. Instruments that can measure other chemicals important to ozone formation and destruction will also be needed.

  5. The Plasmasphere Boundary Layer

    Directory of Open Access Journals (Sweden)

    D. L. Carpenter

    2004-12-01

    Full Text Available As an inner magnetospheric phenomenon the plasmapause region is of interest for a number of reasons, one being the occurrence there of geophysically important interactions between the plasmas of the hot plasma sheet and of the cool plasmasphere. There is a need for a conceptual framework within which to examine and discuss these interactions and their consequences, and we therefore suggest that the plasmapause region be called the Plasmasphere Boundary Layer, or PBL. Such a term has been slow to emerge because of the complexity and variability of the plasma populations that can exist near the plasmapause and because of the variety of criteria used to identify the plasmapause in experimental data. Furthermore, and quite importantly in our view, a substantial obstacle to the consideration of the plasmapause region as a boundary layer has been the longstanding tendency of textbooks on space physics to limit introductory material on the plasmapause phenomenon to zeroth order descriptions in terms of ideal MHD theory, thus implying that the plasmasphere is relatively well understood. A textbook may introduce the concept of shielding of the inner magnetosphere from perturbing convection electric fields, but attention is not usually paid to the variety of physical processes reported to occur in the PBL, such as heating, instabilities, and fast longitudinal flows, processes which must play roles in plasmasphere dynamics in concert with the flow regimes associated with the major dynamo sources of electric fields. We believe that through the use of the PBL concept in future textbook discussions of the plasmasphere and in scientific communications, much progress can be made on longstanding questions about the physics involved in the formation of the plasmapause and in the cycles of erosion and recovery of the plasmasphere. Key words. Magnetospheric physics (plasmasphere; plasma convection; MHD waves and instabilities

  6. The Plasmasphere Boundary Layer

    Directory of Open Access Journals (Sweden)

    D. L. Carpenter

    2004-12-01

    Full Text Available As an inner magnetospheric phenomenon the plasmapause region is of interest for a number of reasons, one being the occurrence there of geophysically important interactions between the plasmas of the hot plasma sheet and of the cool plasmasphere. There is a need for a conceptual framework within which to examine and discuss these interactions and their consequences, and we therefore suggest that the plasmapause region be called the Plasmasphere Boundary Layer, or PBL. Such a term has been slow to emerge because of the complexity and variability of the plasma populations that can exist near the plasmapause and because of the variety of criteria used to identify the plasmapause in experimental data. Furthermore, and quite importantly in our view, a substantial obstacle to the consideration of the plasmapause region as a boundary layer has been the longstanding tendency of textbooks on space physics to limit introductory material on the plasmapause phenomenon to zeroth order descriptions in terms of ideal MHD theory, thus implying that the plasmasphere is relatively well understood. A textbook may introduce the concept of shielding of the inner magnetosphere from perturbing convection electric fields, but attention is not usually paid to the variety of physical processes reported to occur in the PBL, such as heating, instabilities, and fast longitudinal flows, processes which must play roles in plasmasphere dynamics in concert with the flow regimes associated with the major dynamo sources of electric fields. We believe that through the use of the PBL concept in future textbook discussions of the plasmasphere and in scientific communications, much progress can be made on longstanding questions about the physics involved in the formation of the plasmapause and in the cycles of erosion and recovery of the plasmasphere.

    Key words. Magnetospheric physics (plasmasphere; plasma convection; MHD waves and instabilities

  7. Engineering 1D Quantum Stripes from Superlattices of 2D Layered Materials.

    Science.gov (United States)

    Gruenewald, John H; Kim, Jungho; Kim, Heung Sik; Johnson, Jared M; Hwang, Jinwoo; Souri, Maryam; Terzic, Jasminka; Chang, Seo Hyoung; Said, Ayman; Brill, Joseph W; Cao, Gang; Kee, Hae-Young; Seo, Sung S Ambrose

    2017-01-01

    Dimensional tunability from two dimensions to one dimension is demonstrated for the first time using an artificial superlattice method in synthesizing 1D stripes from 2D layered materials. The 1D confinement of layered Sr 2 IrO 4 induces distinct 1D quantum-confined electronic states, as observed from optical spectroscopy and resonant inelastic X-ray scattering. This 1D superlattice approach is generalizable to a wide range of layered materials. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Processes for multi-layer devices utilizing layer transfer

    Energy Technology Data Exchange (ETDEWEB)

    Nielson, Gregory N; Sanchez, Carlos Anthony; Tauke-Pedretti, Anna; Kim, Bongsang; Cederberg, Jeffrey; Okandan, Murat; Cruz-Campa, Jose Luis; Resnick, Paul J

    2015-02-03

    A method includes forming a release layer over a donor substrate. A plurality of devices made of a first semiconductor material are formed over the release layer. A first dielectric layer is formed over the plurality of devices such that all exposed surfaces of the plurality of devices are covered by the first dielectric layer. The plurality of devices are chemically attached to a receiving device made of a second semiconductor material different than the first semiconductor material, the receiving device having a receiving substrate attached to a surface of the receiving device opposite the plurality of devices. The release layer is etched to release the donor substrate from the plurality of devices. A second dielectric layer is applied over the plurality of devices and the receiving device to mechanically attach the plurality of devices to the receiving device.

  9. A green chemistry approach for synthesizing biocompatible gold nanoparticles.

    Science.gov (United States)

    Gurunathan, Sangiliyandi; Han, JaeWoong; Park, Jung Hyun; Kim, Jin-Hoi

    2014-01-01

    Gold nanoparticles (AuNPs) are a fascinating class of nanomaterial that can be used for a wide range of biomedical applications, including bio-imaging, lateral flow assays, environmental detection and purification, data storage, drug delivery, biomarkers, catalysis, chemical sensors, and DNA detection. Biological synthesis of nanoparticles appears to be simple, cost-effective, non-toxic, and easy to use for controlling size, shape, and stability, which is unlike the chemically synthesized nanoparticles. The aim of this study was to synthesize homogeneous AuNPs using pharmaceutically important Ganoderma spp. We developed a simple, non-toxic, and green method for water-soluble AuNP synthesis by treating gold (III) chloride trihydrate (HAuCl4) with a hot aqueous extract of the Ganoderma spp. mycelia. The formation of biologically synthesized AuNPs (bio-AuNPs) was characterized by ultraviolet (UV)-visible absorption spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray (EDX), dynamic light scattering (DLS), and transmission electron microscopy (TEM). Furthermore, the biocompatibility of as-prepared AuNPs was evaluated using a series of assays, such as cell viability, lactate dehydrogenase leakage, and reactive oxygen species generation (ROS) in human breast cancer cells (MDA-MB-231). The color change of the solution from yellow to reddish pink and strong surface plasmon resonance were observed at 520 nm using UV-visible spectroscopy, and that indicated the formation of AuNPs. DLS analysis revealed the size distribution of AuNPs in liquid solution, and the average size of AuNPs was 20 nm. The size and morphology of AuNPs were investigated using TEM. The biocompatibility effect of as-prepared AuNPs was investigated in MDA-MB-231 breast cancer cells by using various concentrations of AuNPs (10 to 100 μM) for 24 h. Our findings suggest that AuNPs are non-cytotoxic and biocompatible. To the best of our knowledge

  10. A green chemistry approach for synthesizing biocompatible gold nanoparticles

    Science.gov (United States)

    Gurunathan, Sangiliyandi; Han, JaeWoong; Park, Jung Hyun; Kim, Jin-Hoi

    2014-05-01

    Gold nanoparticles (AuNPs) are a fascinating class of nanomaterial that can be used for a wide range of biomedical applications, including bio-imaging, lateral flow assays, environmental detection and purification, data storage, drug delivery, biomarkers, catalysis, chemical sensors, and DNA detection. Biological synthesis of nanoparticles appears to be simple, cost-effective, non-toxic, and easy to use for controlling size, shape, and stability, which is unlike the chemically synthesized nanoparticles. The aim of this study was to synthesize homogeneous AuNPs using pharmaceutically important Ganoderma spp . We developed a simple, non-toxic, and green method for water-soluble AuNP synthesis by treating gold (III) chloride trihydrate (HAuCl4) with a hot aqueous extract of the Ganoderma spp . mycelia. The formation of biologically synthesized AuNPs (bio-AuNPs) was characterized by ultraviolet (UV)-visible absorption spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray (EDX), dynamic light scattering (DLS), and transmission electron microscopy (TEM). Furthermore, the biocompatibility of as-prepared AuNPs was evaluated using a series of assays, such as cell viability, lactate dehydrogenase leakage, and reactive oxygen species generation (ROS) in human breast cancer cells (MDA-MB-231). The color change of the solution from yellow to reddish pink and strong surface plasmon resonance were observed at 520 nm using UV-visible spectroscopy, and that indicated the formation of AuNPs. DLS analysis revealed the size distribution of AuNPs in liquid solution, and the average size of AuNPs was 20 nm. The size and morphology of AuNPs were investigated using TEM. The biocompatibility effect of as-prepared AuNPs was investigated in MDA-MB-231 breast cancer cells by using various concentrations of AuNPs (10 to 100 μM) for 24 h. Our findings suggest that AuNPs are non-cytotoxic and biocompatible. To the best of our knowledge

  11. Ultra-selective high-flux membranes from directly synthesized zeolite nanosheets

    Science.gov (United States)

    Jeon, Mi Young; Kim, Donghun; Kumar, Prashant; Lee, Pyung Soo; Rangnekar, Neel; Bai, Peng; Shete, Meera; Elyassi, Bahman; Lee, Han Seung; Narasimharao, Katabathini; Basahel, Sulaiman Nasir; Al-Thabaiti, Shaeel; Xu, Wenqian; Cho, Hong Je; Fetisov, Evgenii O.; Thyagarajan, Raghuram; Dejaco, Robert F.; Fan, Wei; Mkhoyan, K. Andre; Siepmann, J. Ilja; Tsapatsis, Michael

    2017-03-01

    A zeolite with structure type MFI is an aluminosilicate or silicate material that has a three-dimensionally connected pore network, which enables molecular recognition in the size range 0.5-0.6 nm. These micropore dimensions are relevant for many valuable chemical intermediates, and therefore MFI-type zeolites are widely used in the chemical industry as selective catalysts or adsorbents. As with all zeolites, strategies to tailor them for specific applications include controlling their crystal size and shape. Nanometre-thick MFI crystals (nanosheets) have been introduced in pillared and self-pillared (intergrown) architectures, offering improved mass-transfer characteristics for certain adsorption and catalysis applications. Moreover, single (non-intergrown and non-layered) nanosheets have been used to prepare thin membranes that could be used to improve the energy efficiency of separation processes. However, until now, single MFI nanosheets have been prepared using a multi-step approach based on the exfoliation of layered MFI, followed by centrifugation to remove non-exfoliated particles. This top-down method is time-consuming, costly and low-yield and it produces fragmented nanosheets with submicrometre lateral dimensions. Alternatively, direct (bottom-up) synthesis could produce high-aspect-ratio zeolite nanosheets, with improved yield and at lower cost. Here we use a nanocrystal-seeded growth method triggered by a single rotational intergrowth to synthesize high-aspect-ratio MFI nanosheets with a thickness of 5 nanometres (2.5 unit cells). These high-aspect-ratio nanosheets allow the fabrication of thin and defect-free coatings that effectively cover porous substrates. These coatings can be intergrown to produce high-flux and ultra-selective MFI membranes that compare favourably with other MFI membranes prepared from existing MFI materials (such as exfoliated nanosheets or nanocrystals).

  12. Inter-layer synchronization in multiplex networks of identical layers

    Energy Technology Data Exchange (ETDEWEB)

    Sevilla-Escoboza, R. [Centro Universitario de los Lagos, Universidad de Guadalajara, Jalisco 47460 (Mexico); Sendiña-Nadal, I.; Leyva, I.; Buldú, J. M. [Complex Systems Group & GISC, Universidad Rey Juan Carlos, 28933 Móstoles, Madrid (Spain); Center for Biomedical Technology, Universidad Politécnica de Madrid, 28223 Pozuelo de Alarcón, Madrid (Spain); Gutiérrez, R. [School of Physics and Astronomy, University of Nottingham, Nottingham NG7 2RD (United Kingdom); Boccaletti, S. [CNR-Institute of Complex Systems, Via Madonna del Piano, 10, 50019 Sesto Fiorentino, Florence (Italy); The Italian Embassy in Israel, 25 Hamered st., 68125 Tel Aviv (Israel)

    2016-06-15

    Inter-layer synchronization is a distinctive process of multiplex networks whereby each node in a given layer evolves synchronously with all its replicas in other layers, irrespective of whether or not it is synchronized with the other units of the same layer. We analytically derive the necessary conditions for the existence and stability of such a state, and verify numerically the analytical predictions in several cases where such a state emerges. We further inspect its robustness against a progressive de-multiplexing of the network, and provide experimental evidence by means of multiplexes of nonlinear electronic circuits affected by intrinsic noise and parameter mismatch.

  13. Syntheses of crosslinked latex nanoparticles using differential microemulsion polymerization

    Science.gov (United States)

    Hassmoro, N. F.; Rusop, M.; Abdullah, S.

    2013-06-01

    The differential microemulsion polymerization was used to synthesize latex nanoparticles. In this paper, 1, 3-butylene glycol dimethacrylate (1, 3-BGDMA) was used as a crosslinker respectively 1-5 weight% of monomer total. Butyl acrylate (BA), butyl methacrylate (BMA), and methacrylic acid (MAA) was used as the monomer. The thin film of latex nanoparticles were prepared by using spin coating method and have been dried at 100°C for 5 minutes. The amount of the crosslinker added in the polymerization was optimized and we found that the particle sizes fall in the range of 30-60 nm. The structural morphology of the uncrosslinked latex represented the most homogeneous image compared to the crosslinked latex. The effect of the amount of crosslinker on the particle sizes investigated by the Zeta-sizer Nano series while Atomic Force microscopy (AFM) was used to study the structural properties of latex nanoparticles.

  14. A Dependable Microelectronic Peptide Synthesizer Using Electrode Data

    Directory of Open Access Journals (Sweden)

    H. G. Kerkhoff

    2008-01-01

    Full Text Available The research in the area of microelectronic fluidic devices for biomedical applications is rapidly growing. As faults in these devices can have serious personal implications, a system is presented which includes fault tolerance with respect to the synthesized biomaterials (peptides. It can employ presence and purity detection of peptide droplets via current (charge tests of control electrodes or impedance (phase measurements using direct sensing electrodes near the peptide collector area. The commercial multielectrode array performs better in pure and impure detection of peptides in impedance and phase. Our two-electrode X-MEF case shows slightly poorer results. In both cases the phase is the best choice for contents detection. If there are presence or purity problems, the location is marked, and repeated peptide synthesis at another collector site is initiated.

  15. Shape dependent heat transport through green synthesized gold nanofluids

    Science.gov (United States)

    John, Jisha; Thomas, Lincy; Kumar, B. Rajesh; Kurian, Achamma; George, Sajan D.

    2015-08-01

    Nanofluids hold promise as a more efficient coolant for thermoelectric devices. Despite the capability of tailoring the thermo physical properties of nanofluids, by tuning the particle parameters such as shape, size and concentration, the toxicity of chemicals used for the preparation of nanoparticles is a serious concern. Green synthesis of nanoparticles is emerging as an alternative to the conventional chemical and physical methods for the preparation of nanoparticles. In this work, the results of the preparation of gold nanoparticles using plant extracts as reducing agents are presented. The green synthesis route employed for the present study provides particles of similar size, but the shape of the particles is found to vary depending upon the source of the natural reducing agents. The thermal diffusivity values of the gold nanofluid measured using laser based dual beam thermal lens technique elucidate the role of shape and concentration of the green synthesized nanoparticles on the effective thermal diffusivity values of the nanofluids.

  16. Rapid decolorization of textile wastewater by green synthesized iron nanoparticles.

    Science.gov (United States)

    Ozkan, Z Y; Cakirgoz, M; Kaymak, E S; Erdim, E

    2018-01-01

    The effectiveness of green tea (Camellia sinensis) and pomegranate (Punica granatum) extracts for the production of iron nanoparticles and their application for color removal from a textile industry wastewater was investigated. Polyphenols in extracts act as reducing agents for iron ions in aqueous solutions, forming iron nanoparticles. Pomegranate extract was found to have almost a 10-fold higher polyphenolic content than the same amount of green tea extract on a mass basis. However, the size of the synthesized nanoparticles did not show a correlation with the polyphenolic content. 100 ppm and 300 ppm of iron nanoparticles were evaluated in terms of color removal efficiency from a real textile wastewater sample. 300 ppm of pomegranate nanoscale zero-valent iron particles showed more than 95% color removal and almost 80% dissolved organic carbon removal. The degradation mechanisms are is considered to be adsorption and precipitation to a major extent, and mineralization to a minor extent.

  17. Magnesium hydroxide nanoparticles synthesized in water-in-oil microemulsions.

    Science.gov (United States)

    Wu, Jianming; Yan, Hong; Zhang, Xuehu; Wei, Liqiao; Liu, Xuguang; Xu, Bingshe

    2008-08-01

    Well-dispersed magnesium hydroxide nanoplatelets were synthesized by a simple water-in-oil (w/o) microemulsion process, blowing gaseous ammonia (NH(3)) into microemulsion zones solubilized by magnesium chloride solution (MgCl(2)). Typical quaternary microemulsions of Triton X-100/cyclohexane/n-hexanol/water were used as space-confining microreactors for the nucleation, growth, and crystallization of magnesium hydroxide nanoparticles. The obtained magnesium hydroxide was characterized by field-emission scanning electron microscopy (FESEM), high-resolution transmission election microscopy (HRTEM), X-ray powder diffraction (XRD), laser light scattering, Fourier transform infrared spectroscopy (FT-IR), and thermogravimetric analysis-differential scanning calorimetry (TGA-DSC). The mole ratio of water to surfactant (omega(0)) played an important role in the sizes of micelles and nanoparticles, increasing with the increase of omega(0). The compatibility and dispersibility of nanoparticles obtained from reverse micelles were improved in the organic phase.

  18. Piezoelectric Materials Synthesized by the Hydrothermal Method and Their Applications

    Directory of Open Access Journals (Sweden)

    Takeshi Morita

    2010-12-01

    Full Text Available Synthesis by the hydrothermal method has various advantages, including low reaction temperature, three-dimensional substrate availability, and automatic polarization alignment during the process. In this review, powder synthesis, the fabrication of piezoelectric thin films, and their applications are introduced. A polycrystalline lead zirconate titanate (PZT thin film was applied to a micro ultrasonic motor, and an epitaxial lead titanate (PbTiO3 thin film was estimated as a ferroelectric data storage medium. Ferroelectric and piezoelectric properties were successfully obtained for epitaxial PbTiO3 films. As lead-free piezoelectric powders, KNbO3 and NaNbO3 powders were synthesized by the hydrothermal method and sintered together to form (K,NaNbO3 ceramics, from which reasonable piezoelectric performance was achieved.

  19. Nanostructured superhydrophobic films synthesized by electrodeposition of fluorinated polyindoles

    Directory of Open Access Journals (Sweden)

    Gabriela Ramos Chagas

    2015-10-01

    Full Text Available Materials with bioinspired superhydrophobic properties are highly desirable for many potential applications. Here, nine novel monomers derived from indole are synthesized to obtain these properties by electropolymerization. These monomers differ by the length (C4F9, C6F13 and C8F17 and the position (4-, 5- and 6-position of indole of the perfluorinated substituent. Polymeric films were obtained with C4F9 and C6F13 chains and differences in the surface morphology depend especially on the substituent position. The polyindoles exhibited hydrophobic and superhydrophobic properties even with a very low roughness. The best results are obtained with PIndole-6-F6 for which superhydrophobic and highly oleophobic properties are obtained due to the presence of spherical nanoparticles and low surface energy compounds.

  20. Synthesizing Knowledge on Internet of Things (IoT)

    DEFF Research Database (Denmark)

    Liu, Fei; Tan, Chee-Wee; Lim, Eric T. K.

    2016-01-01

    Research on Internet of Things (IoT) has been booming for past couple of years due to technological advances and its potential for application. Nonetheless, the rapid growth of IoT articles as well as the heterogeneous nature of IoT pose challenges in synthesizing prior research on the phenomenon....... Based on quantitative citation analysis, this Research-in-Progress (RIP) study seeks to tackle the abovementioned challenges by reviewing 1,065 IoT articles retrieved from ISI Web of Science. Specifically, we employed HistCite to generate a historiography of IoT research. In turn, the historiography...... yields a citation network that not only aids us in identifying main paths of codification and diffusion, but also helps in exploring the existence of path-dependent transitions within extant literature. This study hence contributes to both IoT research and practice by tracing the accumulation...

  1. Synthesizing and Salvaging NAD+: Lessons Learned from Chlamydomonas reinhardtii

    Science.gov (United States)

    Lin, Huawen; Kwan, Alan L.; Dutcher, Susan K.

    2010-01-01

    The essential coenzyme nicotinamide adenine dinucleotide (NAD+) plays important roles in metabolic reactions and cell regulation in all organisms. Bacteria, fungi, plants, and animals use different pathways to synthesize NAD+. Our molecular and genetic data demonstrate that in the unicellular green alga Chlamydomonas NAD+ is synthesized from aspartate (de novo synthesis), as in plants, or nicotinamide, as in mammals (salvage synthesis). The de novo pathway requires five different enzymes: L-aspartate oxidase (ASO), quinolinate synthetase (QS), quinolate phosphoribosyltransferase (QPT), nicotinate/nicotinamide mononucleotide adenylyltransferase (NMNAT), and NAD+ synthetase (NS). Sequence similarity searches, gene isolation and sequencing of mutant loci indicate that mutations in each enzyme result in a nicotinamide-requiring mutant phenotype in the previously isolated nic mutants. We rescued the mutant phenotype by the introduction of BAC DNA (nic2-1 and nic13-1) or plasmids with cloned genes (nic1-1 and nic15-1) into the mutants. NMNAT, which is also in the de novo pathway, and nicotinamide phosphoribosyltransferase (NAMPT) constitute the nicotinamide-dependent salvage pathway. A mutation in NAMPT (npt1-1) has no obvious growth defect and is not nicotinamide-dependent. However, double mutant strains with the npt1-1 mutation and any of the nic mutations are inviable. When the de novo pathway is inactive, the salvage pathway is essential to Chlamydomonas for the synthesis of NAD+. A homolog of the human SIRT6-like gene, SRT2, is upregulated in the NS mutant, which shows a longer vegetative life span than wild-type cells. Our results suggest that Chlamydomonas is an excellent model system to study NAD+ metabolism and cell longevity. PMID:20838591

  2. Collagen synthesized in fluorocarbon polymer implant in the rabbit cornea.

    Science.gov (United States)

    Drubaix, I; Legeais, J M; Malek-Chehire, N; Savoldelli, M; Ménasche, M; Robert, L; Renard, G; Pouliquen, Y

    1996-04-01

    The integration of microporous polymer into tissues is of great interest for the production of keratoprosthetic devices. Our previous studies showed functional differentiated cells and collagen synthesis in the pore of an expanded polytetrafluoroethylene implant. This study identifies and quantifies collagen types synthesized in the implant. Expanded polytetrafluoroethylene polymers were implanted in the rabbit corneas. The collagen extracted from the polymer and implanted stroma after 1, 3 and 6 months was quantified by measuring hydroxyproline. The relative proportions of collagen types were determined by densitometric analysis after SDS-PAGE. The collagen-to-protein ratio in the polymer increased from 0.22 to 0.70 between the first and third month after implantation becoming similar to control cornea. So that of the protein and collagen densities in the polymer and implanted stroma were similar to the control from the third month. The collagen synthesized in the polymer was mainly type I (87%) plus a small amount of type III (8%) 1 month after implantation. The collagen distribution from the third month after implantation was similar to that of the controls and remained constant thereafter in the polymer implant and in the implanted stroma. Immunogold labelling techniques confirmed these results. Implantation of this PTFE disc induced no obvious modification of the corneal stroma, confirming that this polymer is a good interface that is compatible with the native corneal stroma. The keratocytes in this polymer rapidly adopted a corneal phenotype, distinct from the dermal or scaring phenotype as shown by the collagen types produced in the implant.

  3. Syntheses and neuraminidase inhibitory activity of multisubstituted cyclopentane amide derivatives.

    Science.gov (United States)

    Chand, Pooran; Babu, Y Sudhakar; Bantia, Shanta; Rowland, Scott; Dehghani, Ali; Kotian, Pravin L; Hutchison, Tracy L; Ali, Shoukath; Brouillette, Wayne; El-Kattan, Yahya; Lin, Tsu-Hsing

    2004-04-08

    In further studies aimed toward identifying effective and safe inhibitors of influenza neuraminidases, we synthesized a series of multisubstituted cyclopentane amide derivatives. Amides prepared were 14 examples of N-substituted alkyl or aralkyl types from primary amines, 13 examples of the N,N-disubstituted alkyl, aralkyl, or substituted-alkyl type from secondary amines, and 12 examples from cycloaliphatic or substituted cycloaliphatic secondary amines. These compounds bearing two chiral centers, at position-1 in the ring and position-1' in the side chain attached at position 3, were tested for their ability to inhibit A and B forms of influenza neuraminidase. The 1-ethylpropylamide, diethylamide, dipropylamide, and 4-morpholinylamide showed very good inhibitory activity (IC(50) = 0.015-0.080 microM) vs the neuraminidase A form, but modest activity (IC(50) = 3.0-9.2 microM) vs the neuraminidase B form. Since the parent amides bear two chiral centers (C-1 and C-1'), three of the better inhibitors were tested at higher levels of diastereomeric purity. The diastereomers corresponding to the active forms of the 1-(ethyl)propylamide, the diethylamide, and the dipropylamide (all of the same configuration at the C-1' chiral center), and the diastereomer of the diethylamide representing the active form at both C-1' and C-1 were isolated or synthesized from precursors that were isolated as diastereomers. These diastereomers showed some improvement in neuraminidase inhibition over the parent diastereomeric mixtures. 1-Carboxy-1-hydroxy derivatives of the best active compounds, the diethylamide and the dipropylamide, were also prepared. These compounds were not as active as the compounds without the 1-hydroxy group. In an in vivo study, the C-1' active isomer of the diethylamide from the 1-carboxy series was tested in influenza-infected mice by oral and intranasal administration and found to be very effective only intranasally in preventing weight loss at doses as low as 0

  4. Inorganic-organic hybrids originating from organosilane anchored onto leached vermiculite

    Directory of Open Access Journals (Sweden)

    Ana P. M. Alves

    2013-01-01

    Full Text Available The reactivity of clay minerals leached in grafting reactions was investigated. Precursor solids were prepared by treating the sodium vermiculites with nitric acid solutions at several concentrations. The lixiviation produced the restructured porous solids with surface area over a wide range, varying from 133 to 673 m² g- 1. The sodium and lixiviated vermiculites reacted covalently with silylating agent, 3-aminopropyltrimethoxysilane, to attach this agent onto the inorganic surface, through the free available silanols. The products were characterized by CNH elemental analysis, infrared spectroscopy, X-ray diffraction, nuclear magnetic resonance in the solid state for carbon and silicon. CHN data expressed by significant contents of anchored organic chains, up to 2.14 mmol g- 1, as the degree of leaching was increased. The success of this investigation is directly related to the leaching of the natural vermiculite, which is strongly influenced by the reactivity of the abundant original source.

  5. Structure and function of an inorganic-organic separator for electrochemical cells: Preliminary study

    Science.gov (United States)

    Bozek, J. M.

    1974-01-01

    The structure of a new separator material for electrochemical cells has been investigated. Investigation into details of the separator structure showed it to be multilayered and to consist mainly of a quasi-impervious organic skin, a porous region of mixed organic and inorganic material, and an area of nonuniformly treated substrate. The essential feature of the coating (slurry) is believed to be interconnected pores which allow ionic conductivity. The interconnected pores are believed to be formed by the interaction of the plasticizer and inorganic fibers. The major failure mode of silver zinc cells using such a separator (zinc nodules shorting adjacent plates) was investigated.

  6. Oxide-based inorganic/organic and nanoporous spherical particles: synthesis and functional properties

    Directory of Open Access Journals (Sweden)

    Kota Shiba, Motohiro Tagaya, Richard D Tilley and Nobutaka Hanagata

    2013-01-01

    Full Text Available This paper reviews the recent progress in the preparation of oxide-based and heteroatom-doped particles. Surfactant-templated oxide particles, e.g. silica and titania, are possible candidates for various potential applications such as adsorbents, photocatalysts, and optoelectronic and biological materials. We highlight nanoporous oxides of one element, such as silicon or titanium, and those containing multiple elements, which exhibit properties that are not achieved with individual components. Although the multicomponent nanoporous oxides possess a number of attractive functions, the origin of their properties is hard to determine due to compositional/structural complexity. Particles with a well-defined size and shape are keys for a quantitative and detailed discussion on the unique complex properties of the particles. From this viewpoint, we review the synthesis techniques of the oxide particles, which are functionalized with organic molecules or doped with heteroatoms, the physicochemical properties of the particles and the possibilities for their photofunctional applications as complex systems.

  7. Charge-Separation Dynamics in Inorganic-Organic Ternary Blends for Efficient Infrared Photodiodes

    NARCIS (Netherlands)

    Jarzab, Dorota; Szendrei, Krisztina; Yarema, Maksym; Pichler, Stefan; Heiss, Wolfgang; Loi, Maria A.

    2011-01-01

    Knowledge about the working mechanism of the PbS:P3HT:PCBM [P3HT=poly(3-hexylthiophene), PCBM=[6,6]-phenyl-C(61) -butyric acid methyl ester] hybrid blend used for efficient near-infrared photodiodes is obtained from time-resolved photoluminescence (PL) studies. To understand the role of each

  8. Investigating primary marine aerosol properties: CCN activity of sea salt and mixed inorganic-organic particles

    NARCIS (Netherlands)

    King, S.M.; Butcher, A.C.; Rosenoern, T.; Coz, E.; Lieke, K.I.; Leeuw, G. de; Nilsson, E.D.; Bilde, M.

    2012-01-01

    Sea spray particles ejected as a result of bubbles bursting from artificial seawater containing salt and organic matter in a stainless steel tank were sampled for size distribution, morphology, and cloud condensation nucleus (CCN) activity. Bubbles were generated either by aeration through a

  9. Controlled titania sponge structures templated with block copolymers for applications in inorganic-organic photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Rawolle, M.; Sarkar, K.; Prams, S.M.; Zhong, Q.; Mueller-Buschbaum, P. [Technische Univ. Muenchen, Garching (Germany). Lehrstuhl fuer Funktionelle Materialien; Lellig, P.; Memesa, M. [Max-Planck-Institut fuer Polymerforschung, Mainz (Germany); Gutmann, J.S. [Max-Planck-Institut fuer Polymerforschung, Mainz (Germany); Mainz Univ. (Germany). Inst. fuer Physikalische Chemie; Perlich, J. [Technische Univ. Muenchen, Garching (Germany). Lehrstuhl fuer Funktionelle Materialien; DESY, Hamburg (Germany). HASYLAB; Roth, S.V. [DESY, Hamburg (Germany). HASYLAB

    2010-07-01

    Titania films with a well-defined morphology which have a huge application potential in photovoltaics are prepared by combining sol-gel chemistry and an amphiphilic diblock copolymer as structure directing agent in a 'good-poor' solvent induced microphase separation process. Using the diblock copolymer poly(dimethyl siloxane)-block-methyl methacrylate poly(ethylene oxide) PDMS-b-MA(PEO) we can create a sponge structure with pores on two different size scales in a reproducible way. On the one hand mesoporous structures with pores on the nanometer scale provide a large surface area for charge generation. On the other hand macropores on a micrometer scale ensure an easier infiltration of holeconducting material and enhance the surface roughness for better light absorption. (orig.)

  10. Electron spin and the origin of Bio-homochirality II. Prebiotic inorganic-organic reaction model

    OpenAIRE

    Wang, Wei

    2014-01-01

    The emergence of biomolecular homochirality is a critically important question about life phenomenon and the origins of life. In a previous paper (arXiv:1309.1229), I tentatively put forward a new hypothesis that the emergence of a single chiral form of biomolecules in living organisms is specifically determined by the electron spin state during their enzyme-catalyzed synthesis processes. However, how a homochirality world of biomolecules could have formed in the absence of enzymatic networks...

  11. Functionalization of a Hydrophilic Commercial Membrane Using Inorganic-Organic Polymers Coatings for Membrane Distillation

    Directory of Open Access Journals (Sweden)

    Lies Eykens

    2017-06-01

    Full Text Available Membrane distillation is a thermal separation technique using a microporous hydrophobic membrane. One of the concerns with respect to the industrialization of the technique is the development of novel membranes. In this paper, a commercially available hydrophilic polyethersulfone membrane with a suitable structure for membrane distillation was modified using available hydrophobic coatings using ORMOCER® technology to obtain a hydrophobic membrane that can be applied in membrane distillation. The surface modification was performed using a selection of different components, concentrations, and application methods. The resulting membranes can have two hydrophobic surfaces or a hydrophobic and hydrophilic surface depending on the application method. An extensive characterization procedure confirmed the suitability of the coating technique and the obtained membranes for membrane distillation. The surface contact angle of water could be increased from 27° up to 110°, and fluxes comparable to membranes commonly used for membrane distillation were achieved under similar process conditions. A 100 h test demonstrated the stability of the coating and the importance of using sufficiently stable base membranes.

  12. Two new inorganic-organic hybrid single pendant hexadecavanadate derivatives with bifunctional electrocatalytic activities

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Baoxia [Key Laboratory of Polyoxometalate Science of Ministry of Education, Faculty of Chemistry, Northeast Normal University, Changchun, Jilin 130024 (China); Peng, Jun [Key Laboratory of Polyoxometalate Science of Ministry of Education, Faculty of Chemistry, Northeast Normal University, Changchun, Jilin 130024 (China)]. E-mail: jpeng@nenu.edu.cn; Tian, Aixiang [Key Laboratory of Polyoxometalate Science of Ministry of Education, Faculty of Chemistry, Northeast Normal University, Changchun, Jilin 130024 (China); Sha, Jingquan [Key Laboratory of Polyoxometalate Science of Ministry of Education, Faculty of Chemistry, Northeast Normal University, Changchun, Jilin 130024 (China); Li, Li [Key Laboratory of Polyoxometalate Science of Ministry of Education, Faculty of Chemistry, Northeast Normal University, Changchun, Jilin 130024 (China); Liu, Hongsheng [Key Laboratory of Polyoxometalate Science of Ministry of Education, Faculty of Chemistry, Northeast Normal University, Changchun, Jilin 130024 (China)

    2007-03-01

    Two new supramolecular assembly hexadecavanadate derivatives of H{sub 2}[Cd(phen){sub 3}]{sub 2}{l_brace}[Cd(H{sub 2}O)(phen){sub 2}](V{sub 16}O{sub 38}Cl){r_brace}.2.5H{sub 2}O 1 (phen = 1,10'-phenanthroline) and H{sub 2}[Cd(bipy){sub 3}][Cd(H{sub 2}O)(bipy){sub 2}]{l_brace}[Cd(H{sub 2}O)(bipy){sub 2}](V{sub 16}O{sub 38}Cl){r_brace}.1.5H{sub 2}O 2 (bipy 2,2'-bipyridine), have been prepared under mild hydrothermal conditions and structurally characterized by IR, XPS spectra, TG analyses and single-crystal X-ray diffraction. Compounds 1 and 2 are constructed from single pendant [CdL{sub 2}] (L = phen, 1 and L = bipy, 2) modified hexadecavanadates. The hybrids 1 and 2 were used as solid bulk modifier to fabricate bulk-modified carbon paste electrodes (CPEs) (1-CPE and 2-CPE) by direct mixing. The electrochemical behaviors and electrocatalysis of 1-CPE and 2-CPE indicate bifunctional electrocatalytic activities toward both the oxidation and reduction of nitrite. Furthermore, their electrocatalytic activities toward the reduction of bromate and oxidation of ascorbic acid are also studied in 1 M H{sub 2}SO{sub 4} aqueous solutions.

  13. A new inorganic-organic composite coagulant, consisting of polyferric sulphate (PFS) and polyacrylamide (PAA).

    Science.gov (United States)

    Moussas, P A; Zouboulis, A I

    2009-08-01

    Currently, research is focused on the synthesis of new composite coagulants, which are constituted of both inorganic and organic materials. In this paper, the development of relevant reagents was investigated, by combining the inorganic pre-polymerised iron-based coagulant Polyferric Sulphate (PFS) with an organic, non-ionic polymer (Polyacrylamide, PAA) under different PAA/Fe (mg/l) and OH/Fe molar ratios. Moreover, the new reagents were characterised in terms of typical properties, stability and morphological analysis (XRD, FTIR, SEM). Their coagulation performance, when treating low or high turbid kaolin-humic acid suspensions, was also investigated, whereas the applied coagulation mechanisms were discussed by using the Photometric Dispersion Analysis (PDA) analysis. The results show that the new coagulation reagents present improved properties, including increased effective polymer species concentration, and they exhibit very good stability. The respective tests using PDA confirmed that the predominant coagulation mechanism of PFS-PAA is the bridge formation mechanism. Coagulation experiments in low or high turbid kaolin-humic acid suspensions reveal that the novel composite reagent PFS-PAA exhibits better coagulation performance, when compared with simple PFS, in terms of zeta-potential reduction, turbidity and organic matter removal and residual iron concentration.

  14. Inorganic-organic solar cells based on quaternary sulfide as absorber materials.

    Science.gov (United States)

    Hong, Tiantian; Liu, Zhifeng; Yan, Weiguo; Liu, Junqi; Zhang, Xueqi

    2015-12-14

    We report a novel promising quaternary sulfide (CuAgInS) to serve as a semiconductor sensitizer material in the photoelectrochemical field. In this study, CuAgInS (CAIS) sulfide sensitized ZnO nanorods were fabricated on ITO substrates through a facile and low-cost hydrothermal chemical method and applied on photoanodes for solar cells for the first time. The component and stoichiometry were key factors in determining the photoelectric performance of CAIS sulfide, which were controlled by modulating their reaction time. ZnO/Cu0.7Ag0.3InS2 nanoarrays exhibit an enhanced optical and photoelectric performance and the power conversion efficiency of ITO/ZnO/Cu0.7Ag0.3InS2/P3HT/Pt solid-state solar cell was up to 1.80%. The remarkable performance stems from improved electron transfer, a higher efficiency of light-harvesting and appropriate band gap alignment at the interface of the ZnO/Cu0.7Ag0.3InS2 NTs. The research indicates that CAIS as an absorbing material has enormous potential in solar cell systems.

  15. Neocortical layer 6, a review

    Directory of Open Access Journals (Sweden)

    Alex M Thomson

    2010-03-01

    Full Text Available This review attempts to summarise some of the major areas of neocortical research as it pertains to layer 6. After a brief summary of the development of this intriguing layer, the major pyramidal cell classes to be found in layer 6 are described and compared. The connections made and received by these different classes of neurones are then discussed and the possible functions of these connections, with particular reference to the shaping of responses in visual cortex and thalamus. Inhibition in layer 6 is discussed where appropriate, but not in great detail. Many types of interneurones are to be found in each cortical layer and layer 6 is no exception, but the functions of each type remain to be elucidated.

  16. Boundary-Layer & health

    Science.gov (United States)

    Costigliola, V.

    2010-09-01

    It has long been known that specific atmospheric processes, such as weather and longer-term climatic fluctuations, affect human health. The biometeorological literature refers to this relationship as meteorotropism, defined as a change in an organism that is correlated with a change in atmospheric conditions. Plenty of (patho)physiological functions are affected by those conditions - like the respiratory diseases - and currently it is difficult to put any limits for pathologies developed in reply. Nowadays the importance of atmospheric boundary layer and health is increasingly recognised. A number of epidemiologic studies have reported associations between ambient concentrations of air pollution, specifically particulate pollution, and adverse health effects, even at the relatively low concentrations of pollution found. Since 1995 there have been over twenty-one studies from four continents that have explicitly examined the association between ambient air pollutant mixes and daily mortality. Statistically significant and positive associations have been reported in data from various locations around the world, all with varying air pollutant concentrations, weather conditions, population characteristics and public health policies. Particular role has been given to atmospheric boundary layer processes, the impact of which for specific patient-cohort is, however, not well understood till now. Assessing and monitoring air quality are thus fundamental to improve Europe's welfare. One of current projects run by the "European Medical Association" - PASODOBLE will develop and demonstrate user-driven downstream information services for the regional and local air quality sectors by combining space-based and in-situ data with models in 4 thematic service lines: - Health community support for hospitals, pharmacies, doctors and people at risk - Public information for regions, cities, tourist industry and sporting event organizers - Compliance monitoring support on particulate

  17. Magnetism in layered Ruthenates

    Energy Technology Data Exchange (ETDEWEB)

    Steffens, Paul C.

    2008-07-01

    In this thesis, the magnetism of the layered Ruthenates has been studied by means of different neutron scattering techniques. Magnetic correlations in the single-layer Ruthenates of the series Ca{sub 2-x}Sr{sub x}RuO{sub 4} have been investigated as function of Sr-concentration (x=0.2 and 0.62), temperature and magnetic field. These inelastic neutron scattering studies demonstrate the coexistence of ferromagnetic paramagnon scattering with antiferromagnetic fluctuations at incommensurate wave vectors. The temperature dependence of the amplitudes and energies of both types of excitations indicate the proximity to magnetic instabilities; their competition seems to determine the complex behavior of these materials. In Ca{sub 1.8}Sr{sub 0.2}RuO{sub 4}, which shows a metamagnetic transition, the ferromagnetic fluctuations are strongly suppressed at low temperature, but appear at higher temperature or application of a magnetic field. In the high-field phase of Ca{sub 1.8}Sr{sub 0.2}RuO{sub 4} above the metamagnetic transition, a ferromagnetic magnon dominates the excitation spectrum. Polarized neutron scattering revealed the existence of a very broad signal around the zone centre, in addition to the well-known incommensurate excitations at Q=(0.3,0.3,0) in the unconventional superconductor Sr{sub 2}RuO{sub 4}. With this additional contribution, it is possible to set up a general model for the Q-dependent magnetic susceptibility, which is well consistent with the results of other measurement methods that do not resolve the Q-dependence. Upon doping with Ti, the incommensurate fluctuations are enhanced, in particular near the critical concentration for the onset of magnetic order, but no divergence down to very low temperature is observed. In the bilayer Ti-doped Ca{sub 3}Ru{sub 2}O{sub 7}, the existence of magnetic order with a propagation vector of about ((1)/(4),(1)/(4),0) has been discovered and characterized in detail. Above and below T{sub N}, excitations at this

  18. Chemically synthesized PbS Nano particulate thin films for a rapid NO2 gas sensor

    Directory of Open Access Journals (Sweden)

    Burungale Vishal V.

    2016-03-01

    Full Text Available Rapid NO2 gas sensor has been developed based on PbS nanoparticulate thin films synthesized by Successive Ionic Layer Adsorption and Reaction (SILAR method at different precursor concentrations. The structural and morphological properties were investigated by means of X-ray diffraction and field emission scanning electron microscope. NO2 gas sensing properties of PbS thin films deposited at different concentrations were tested. PbS film with 0.25 M precursor concentration showed the highest sensitivity. In order to optimize the operating temperature, the sensitivity of the sensor to 50 ppm NO2 gas was measured at different operating temperatures, from 50 to 200 °C. The gas sensitivity increased with an increase in operating temperature and achieved the maximum value at 150 °C, followed by a decrease in sensitivity with further increase of the operating temperature. The sensitivity was about 35 % for 50 ppm NO2 at 150 °C with rapid response time of 6 s. T90 and T10 recovery time was 97 s at this gas concentration.

  19. Single fiber UV detector based on hydrothermally synthesized ZnO nanorods for wearable computing devices

    Science.gov (United States)

    Eom, Tae Hoon; Han, Jeong In

    2018-01-01

    There has been increasing interest in zinc oxide (ZnO) based ultraviolet (UV) sensing devices over the last several decades owing to their diverse range of applications. ZnO has extraordinary properties, such as a wide band gap and high exciton binding energy, which make it a beneficial material for UV sensing device. Herein, we show a ZnO UV sensing device fabricated on a cylindrical Polyethylene terephthalate (PET) monofilament. The ZnO active layer was synthesized by hydrothermal synthesis and the Cu electrodes were deposited by radio frequency (RF) magnetron sputtering. Cu thin film was deposited uniformly on a single PET fiber by rotating it inside the sputtering chamber. Various characteristics were investigated by changing the concentration of the seed solution and the growth solution. The growth of ZnO nanorods was confirmed by Field Emission Scanning Electron Microscopy (FESEM) to see the surface state and structure, followed by X-ray Diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis. Also, current-voltage (I-V) curves were obtained to measure photocurrent and conductance. Furthermore, falling response time, rising response time, and responsivity were calculated by analyzing current-time (I-t) curves.

  20. ZnO Nanowires Synthesized by Vapor Phase Transport Deposition on Transparent Oxide Substrates

    Directory of Open Access Journals (Sweden)

    Taylor Curtis

    2010-01-01

    Full Text Available Abstract Zinc oxide nanowires have been synthesized without using metal catalyst seed layers on fluorine-doped tin oxide (FTO substrates by a modified vapor phase transport deposition process using a double-tube reactor. The unique reactor configuration creates a Zn-rich vapor environment that facilitates formation and growth of zinc oxide nanoparticles and wires (20–80 nm in diameter, up to 6 μm in length, density <40 nm apart at substrate temperatures down to 300°C. Electron microscopy and other characterization techniques show nanowires with distinct morphologies when grown under different conditions. The effect of reaction parameters including reaction time, temperature, and carrier gas flow rate on the size, morphology, crystalline structure, and density of ZnO nanowires has been investigated. The nanowires grown by this method have a diameter, length, and density appropriate for use in fabricating hybrid polymer/metal oxide nanostructure solar cells. For example, it is preferable to have nanowires no more than 40 nm apart to minimize exciton recombination in polymer solar cells.