WorldWideScience

Sample records for synthesis physico-chemical studies

  1. Physico-Chemical and In-vitro Microbial Studies of Newly Synthesis Organometallic Complexes

    Directory of Open Access Journals (Sweden)

    Isam Hussain Al-Karkhi

    2014-05-01

    Full Text Available Drugs normally synthesized to use as medication to treat diseases like cancer and microbial infections, these synthesized drugs were interested more than naturally-derived drugs which have been shows low activity or not as efficient against diseases. A new ligand 3-methylbenzyl (2Z-2-[1-(pyridin-4-ylethylidene]hydrazine carbodithioate (PE3MBC and its Cd(II, Cu(II, Co(II and Zn(II metal complexes. The new ligand and metal complexes were characterized via various physico-chemical and spectroscopic techniques. Cd(II complex show more activity against microbes and against cancer cell line MCF-7, while other complexes does not shows activity like cadmium complex, all the complexes does not shows any activity against MDAMB-231 cell line. The fatal of the cancer and the microbes cell was due to inhibition of DNA synthesis which was probably due to chelating with metals complexes, or could be referred to lipophilicity, presence of hydrophobic moiety in the complex molecule, also could be due to steric effects and electronic effects.

  2. [Synthesis and physico-chemical properties of lonazolac-Ca, a new antiphlogistic/antirheumatic agent].

    Science.gov (United States)

    Rainer, G; Krüger, U; Klemm, K

    1981-01-01

    Calcium-[3-(p-chlorophenyl)-1-phenylpyrazole-4]-acetate (Lonazolac-Ca, active principle of Irritren) is a new antiinflammatory/antirheumatic agent whose synthesis and physico-chemical properties are described. The physical parameters measured (pKa, partition coefficient P, saturation concentration Cs, surface activity, protein binding) are held against the corresponding values of indomethacin, diclofenac, and phenylbutazone. The size of the permeability coefficient PM of the passive transport through artificial phospholipid collodion membranes as well as the invasion curves calculated from PM indicate a good absorption of lonazolac in man.

  3. PHYSICO-CHEMICAL STUDIES OF DISAZO DYES DERIVED ...

    African Journals Online (AJOL)

    DJFLEX

    with disazo disperse dyes on synthetic polymer-fibres. (Venkataraman, 1974; Otutu et al., 2008). In this present study, the physico-chemical studies of disazo dyes derived from p-aminophenol recently prepared by our research group is described. We also described the kinetics of the dyes on nylon 6 fibre. In another study.

  4. SYNTHESIS, PHYSICO-CHEMICAL AND ANTIMICROBIAL ...

    African Journals Online (AJOL)

    userpc

    -125. Byeong G. Chae D., Hae N., Hyung K. C. and. Yong K. C. (1996); Synthesis and characterization of schiff base derived 2- hydroxy napthaldehyde and aliphatic diammines. Bulletin Korean Chemical. Society 17(8): 687-693. Hassan S. W. ...

  5. Large influence of the synthesis conditions on the physico-chemical properties of nanostructured Fe3O4

    International Nuclear Information System (INIS)

    Franger, S.; Berthet, P.; Dragos, O.; Baddour-Hadjean, R.; Bonville, P.; Berthon, J.

    2007-01-01

    Magnetite synthesized via three different synthesis routes (coprecipitation process in aqueous media, electrochemical synthesis in presence of complexing agents and solid state reaction at high temperature) has been characterized by X-Ray diffraction, scanning electron microscopy, thermal analysis (TGA), FT-IR and Moessbauer spectroscopies. Although each procedure gave homogeneous magnetite powders, many differences could be seen in the physico-chemical properties of the samples mostly depending on the synthesis conditions. For instance, at least two factors seem to have a huge impact onto the Fe 3 O 4 behaviour: the presence of hydration water molecules and the particle size of the powders since a superparamagnetic behaviour was observed with the thinnest particles, at room temperature, on the Moessbauer spectra via the appearance of line broadening and a pronounced central doublet

  6. Physico-chemical, sensory and microbiological qualities of yoghurt ...

    African Journals Online (AJOL)

    This study was conducted to evaluate the physico-chemical, sensory and microbiological qualities of some yoghurt brands sold in Kano Metropolis using standard procedures. The physico-chemical characteristics (viscosity, specific gravity, pH, titratable acidity, fat content) and Sensory properties (color, flavor, smell) were ...

  7. Comparative Studies of Physico-chemical Properties of Some ...

    African Journals Online (AJOL)

    The aim of this study was to evaluate some physico-chemical properties of four major general purpose cement (As, Br, De and Sk) sold in Nigerian market using standard methods; due to the persistent collapse of buildings. The results showed that Br cement recorded the least CaO content (56.17%) while De cement had ...

  8. Physico-chemical and Mineralogical Characterisation of Subsurface ...

    African Journals Online (AJOL)

    Studies were carried out on subsurface sediments obtained around the Gaborone landfill area Botswana, in order to characterize their mineralogy and physico-chemistry, appraise any contaminant inputs from the landfill and assess their ability to attenuate contaminants from the landfill. Physico-chemical properties ...

  9. Physico-chemical studies and evaluation of diuretic activity of Cucurbita maxima

    Directory of Open Access Journals (Sweden)

    Venkattapuram Sampath Saravanan

    2012-12-01

    Full Text Available In this study physico-chemical nature and diuretic activity was evaluated to establish the purity and diuretic activity by comparing with the standard acetazolamide. Pulp of Cucurbita maxima is a common cost effective Indian dish, rich in nutrients. Physico-chemical parameters like ash values, extractive values and loss on drying were performed to find the purity. The hydro-alcoholic extract was prepared by extracting the powder in soxhlet apparatus for 36 hrs. The laboratory qualitative analysis was done and constituents like carbohydrates, proteins, lipids, flavonoids, alkaloids and vitamin C were found. The two doses of extract (150 and 300 mg/kg were given to the rats. Group I served as control, Group II served as standard and Group III and IV served as test. Electrolytes and urine volume was measured after 5 hrs of treatment and the same was compared with the control and the standard drug acetazolamide. Physico-chemical parameters were in the limit and the extract shows significant (p<0.01 diuretic activity at the dose of 300 mg/kg when compared with control.

  10. Seasonal variations of physico-chemical properties of the Great ...

    African Journals Online (AJOL)

    The present study was attempted on the physico-chemical variability of the Great Vedaranyam Swamp of the Point Calimere Wildlife Sanctuary, South-east coast of India. Seasonal variation study was carried out to examine level of varying physico-chemical parameters such as temperature, salinity, pH, dissolved oxygen, ...

  11. Physico-chemical properties and sensory evaluation of jam made ...

    African Journals Online (AJOL)

    This study was carried out to investigate the possibility of producing jam from black-plum and to evaluate the physico-chemical properties, nutritional properties and consumer acceptability of the product. Black-plum jam was produced using traditional openkettle method. The physico-chemical analyses of black-plum fruit ...

  12. Synthesis, physico-chemical properties and complexing abilities of new amphiphilic ligands from D-galacturonic acid.

    Science.gov (United States)

    Allam, Anas; Behr, Jean-Bernard; Dupont, Laurent; Nardello-Rataj, Véronique; Plantier-Royon, Richard

    2010-04-19

    This paper describes a convenient and efficient synthesis of new complexing surfactants from d-galacturonic acid and n-octanol as renewable raw materials in a two-step sequence. In the first step, simultaneous O-glycosidation-esterification under Fischer conditions was achieved. The anomeric ratio of the products was studied based on the main experimental parameters and the activation mode (thermal or microwave). In the second step, aminolysis of the n-octyl ester was achieved with various functionalized primary amines under standard thermal or microwave activation. The physico-chemical properties of these new amphiphilic ligands were measured and these compounds were found to exhibit interesting surface properties. Complexing abilities of one uronamide ligand functionalized with a pyridine moiety toward Cu(II) ions was investigated in solution by EPR titrations. A solid compound was also synthesized and characterized, its relative structure was deduced from spectroscopic data. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  13. PHYSICO-CHEMICAL CHARACTERISTICS OF MESUA FERREA ...

    African Journals Online (AJOL)

    a

    2Department of Chemistry, Rajshahi University of Engineering and ... Studies on the physico-chemical characteristics of seed oils of Mesua ferrea collected ..... Sarkar, Subodh Kumar M.Phil Thesis, Rajshahi University, Bangladesh; 2001; p 91 ...

  14. Influence of the synthesis parameters on the physico-chemical and catalytic properties of cerium oxide for application in the synthesis of diethyl carbonate

    International Nuclear Information System (INIS)

    Leino, Ewelina; Kumar, Narendra; Mäki-Arvela, Päivi; Aho, Atte; Kordás, Krisztián; Leino, Anne-Riikka; Shchukarev, Andrey; Murzin, Dmitry Yu.; Mikkola, Jyri-Pekka

    2013-01-01

    Synthesis of cerium (IV) oxide by means of room temperature precipitation method was carried out. The effect of preparation variables such as synthesis time, calcination temperature and pH of the solution on resulting CeO 2 properties was discussed. Moreover, the comparison of CeO 2 samples prepared in a static and rotation mode of synthesis is presented. The solid catalysts were characterized by means of X-ray powder diffraction, scanning electron microscopy, transmission electron microscope, nitrogen physisorption, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy using pyridine as a probe molecule and temperature programmed desorption of CO 2 . Significant variations in physico-chemical properties of CeO 2 by varying the preparation conditions were observed. Furthermore, the catalytic performances of CeO 2 catalysts were compared in the synthesis of diethyl carbonate starting from ethanol and CO 2 using butylene oxide as a dehydrating agent. The dependence of CeO 2 properties on its catalytic activity is evaluated in detail. - Highlights: • Synthesis of cerium (IV) oxide by precipitation method. • Influence of synthesis time, calcination temperature, mode of stirring and solution pH on properties. • Characterization by XRD, SEM, TEM, nitrogen physisorption, XPS, FTIR. • Catalytic performance diethyl carbonate synthesis from ethanol and CO 2

  15. A study of physico-chemical characteristics of Ugborikoko/Okere ...

    African Journals Online (AJOL)

    PRECIOUS

    2009-11-16

    Nov 16, 2009 ... of the physico-chemical parameters and heavy metal pollutants were determined. Results of both ..... workshops) who use engine oils to service car engines. These values ... Ben Miller Books Nigeria Ltd. 5: 34-55. Imevbore ...

  16. Physico-chemical and toxicological studies on Afzelia africana seed ...

    African Journals Online (AJOL)

    USER

    2010-03-29

    Mar 29, 2010 ... Table 2. Physico-chemical characteristics of Afzelia africana seed oil*. Property .... The moisture level of the seeds of A. africana is low resulting in low acid .... Keay RWJ, Onochie CFA, Stanfield DP (1964). Nigerian Trees, 2.

  17. Physico-chemical characterization and cytotoxicity studies of seed ...

    African Journals Online (AJOL)

    The seeds of Khaya senegalensis were extracted using petroleum ether and methanol with the aim of determining the physico-chemical properties of the seed oil and the cytotoxicity of the two extracts. The refractive index of the oil was found to be 1.458, while the relative density was 0.953. The iodine and saponification ...

  18. Physico-chemical, mineralogical and chemical considerations in ...

    African Journals Online (AJOL)

    ... pH (5.17 – 6.90) and EC (16.53 – 149.20ìS/cm). Values from physico-chemical analyses, secondary minerals abundance index (SMAI) and chemical index of alteration (CIA) of the soils were reflective of particles with high potential for sliding. With major contributions from favourable slope, seismic and hydrologic forces, ...

  19. Physico-Chemical Characterization and Pollution Index ...

    African Journals Online (AJOL)

    Physico-Chemical Characterization and Pollution Index Determination of Leachates from Warri Waste Dumpsite, Southern Nigeria. ... This study characterizes the leachates quality of an active dumpsite in Warri, Delta State and also analyses its contamination or pollution potential. Leachate Pollution Index (LPI) - a tool for ...

  20. Physico-chemical characterisation of material fractions in household waste

    DEFF Research Database (Denmark)

    Götze, Ramona; Boldrin, Alessio; Scheutz, Charlotte

    2016-01-01

    State-of-the-art environmental assessment of waste management systems rely on data for the physico-chemical composition of individual material fractions comprising the waste in question. To derive the necessary inventory data for different scopes and systems, literature data from different sources...... and backgrounds are consulted and combined. This study provides an overview of physico-chemical waste characterisation data for individual waste material fractions available in literature and thereby aims to support the selection of data fitting to a specific scope and the selection of uncertainty ranges related...... to the data selection from literature. Overall, 97 publications were reviewed with respect to employed characterisation method, regional origin of the waste, number of investigated parameters and material fractions and other qualitative aspects. Descriptive statistical analysis of the reported physico...

  1. Physico-Chemical Properties of Kaolin-Organic Acid

    Directory of Open Access Journals (Sweden)

    Yeo S.W.

    2017-01-01

    Full Text Available Soil with more than 20% of organic content is classified as organic soil in Malaysia. Contents of organic soil consist of different types of organic and inorganic matter. Each type of organic matter has its own characteristic and its effect on the properties of the soil is different. Hence, a good understanding on the effect of specific organic and inorganic matter on the physico-chemical characteristic of organic soils can serve as a guide for predicting the properties of organic soils. The main objective is to unveil the effect of organic acid on the physico-chemical properties of soil. Artificial organic soil (kaolin mixed with organic acid was utilized in order to minimize the geochemical variability of studied soil. The organic acid which consists of humic acid and fulvic acid was extracted from highly humificated plant–based compost. The effect of organic acid on the physico-chemical properties of soil was determined by varying the concentration of organic acid. The specific gravity, Atterberg limits, pH, bulk chemical composition and the functional group of kaolin-organic acid were determined. It was found that the plasticity index, specific gravity and pH value were decreased with lowered concentration of organic acid. However, the liquid limits and plastic limits were found to be increased with the concentration decrement of organic acid. The analysis of XRF on the bulk chemical composition and analysis of FTIR spectra on the functional group of artificial organic soils with different concentration have confirmed little geochemical variability between samples.

  2. Physico-chemical and bacteriological quality of rainwater in Egbema ...

    African Journals Online (AJOL)

    Physico-chemical and bacteriological quality of rainwater in Egbema was determined with samples harvested directly, from zinc roof, thatched roof and asbestos roof, at different periods of the rainy season namely, Early, peak and late rains. The values of the physico-chemical parameters were on the higher side at the early ...

  3. Studies on physicochemical properties of pond water in relation to ...

    African Journals Online (AJOL)

    The results showed that the mean of physico-chemical properties obtained were for the littoral zone of the twelve ponds (P1 – P12) studied and that these properties exhibited spatial and temporal variations. The mean abundance of zooplankton ranged from 3 to 78 orgs/Litre. There were more than seven genera of ...

  4. Synthesis of carbide fuels from nano-structured precursors: impact on carbo-reduction and physico-chemical properties

    International Nuclear Information System (INIS)

    Saravia, Alvaro

    2015-01-01

    The classical way classically used for manufacturing carbide fuels consists of carbo-reducing at high temperature (1600 C) and under primary vacuum a mixture of AnO 2 and graphite powders. These conditions are disadvantageous for the synthesis of mixed (U,Pu)C carbides on account of plutonium volatilization. Therefore, one of the main aims of these studies is to decrease the carbo-reduction temperature. The experiments focused mainly on the lowering of the uranium oxide temperature. This result has been obtained with the use of uranium oxide and carbon nano-structured precursors. To achieve this goal colloidal suspensions of uranium oxide have been prepared and stabilized by cellulosic ethers. Cellulosic ethers are both stabiliser for uranium oxide nanoparticles and carbon source for carbo-reduction. It has been shown that these precursors are more efficient for carbo-reduction than the standard precursors: a reduction of 300 C of carbo-reduction temperature has been obtained. The impact of these precursors on carbo-reduction and on physico-chemical properties as well as the structural and microstructural characterizations of the obtained carbides have been carried out. (author) [fr

  5. ASSESSMENT OF PHYSICO-CHEMICAL PARAMETERS OF ...

    African Journals Online (AJOL)

    B. S. Chandravanshi

    KEY WORDS: Physico-chemical, Pollution, Irrigation, Tsaeda Agam River ... Rivers are the main sources of both drinking water and irrigation for agriculture. They also ..... Suspended solids are present in sanitary wastewater and many types of.

  6. Physico-chemical analyses and corrosion effect of produced water ...

    African Journals Online (AJOL)

    Physico-chemical characteristics of the composite produced water sample used for the study has a higher concentration compared with DPR standard for discharge of produced formation water into surface environment. It was assumed that the corrosion of the coupons was due to presence of high chemical matters in the ...

  7. Microbiological and physico-chemical studies on irradiated dewatered sludge

    International Nuclear Information System (INIS)

    Hilmy, N.; Suwirma, S.; Harsoyo; Suhadi, F.

    1987-01-01

    Microbiological and physico-chemical studies on irradiated dewatered sludge. Microbiological and physico-chemical dewatered have been carried out and non-irradiated dewatered sludge of Jakarta city, collected during the rainy and dry season. Total bacterial counts of non-irradiated dewatered sludge with water content of around 20%, were found to be about 7x10 8 per g during the rainy season and 7x10 6 up to 1.3x10 8 per g during the dry season, while coliform fecal Streptococcus and Pseudomonas were found to be 1.6x10 4 to 1.0x10 7 , 3x10 5 , and 5x10 3 per g, respectively. No Salmonella, Shigella and Vibrio were detected in all of the samples observed. About 10% of the total number of coliforms were found to be Escherichia coli. A dose of 6 kGy could eliminate the coliform, E. Coli, fecal Streptococcus and Pseudomonas from all of the dewatered sludge observed. The nutrient value of the sludge was sufficient, i.e. total nitrogen content ranged between 1 and 4,42%, phosphorus between 1.55 and 2.36%, and potassium between 0,1 and 0,2% of dry matter. Heavy metal contents were found a little bit high to be applied as animal feed, but it is still acceptable for soil conditioner. Combining 3 months storage at ambient environment and irradiation dose of 2.5 kGy were found to work synergistically to eliminate coliforms and E. Coli from sludge. (author). 8 figs, 17 refs

  8. Comparison of traditional physico-chemical methods and molecular ...

    African Journals Online (AJOL)

    This study was aim to review the efficiency of molecular markers and traditional physico-chemical methods for the identification of basmati rice. The study involved 44 promising varieties of Indica rices collected from geographically distant places and adapted to irrigated and aerobic agro-ecosystems. Quality data for ...

  9. An assessment of the biological and physico-chemical ...

    African Journals Online (AJOL)

    Physico-chemical parameters and biological (phytoplanktons and macrophytes) composition of Bindare and Hanwa streams in Zaria, Nigeria were studied for a period of three months (September to November 2008). The streams have catchments of varying land use patterns ranging from agricultural (farming and animal ...

  10. COMPARATIVE STUDY OF CHEMICAL COMPOSITION, PHYSICO-CHEMICAL AND ANTIOXIDANT PROPERTIES OF OILS EXTRACTED BY TRADITIONAL AND HEXANE METHODS FROM TERMINALIA CATAPPA L. KERNELS

    Directory of Open Access Journals (Sweden)

    Bérenger A. L. Ladele

    2017-10-01

    Full Text Available The comparative study of physico-chemical characteristics of Terminalia catappa L. kernel oils extracted by two methods has been done. The oil yields were 28.13 % and 61.78 % respectively for traditional and hexane methods and the fatty acid profiles showed palmitic acid (40.79 % and 40.03 % respectively oleic acid (25.55 % and 26.09 % respectively, linoleic acid (26.72 % and 26.64 % respectively and stearic acid (4.35 % and 4.49 % respectively as major components. The oils extracted by the two ways showed similar physico-chemical properties, good calorific values and non-toxicity against Artemia salina L. Oil obtained by traditional method exhibited more antioxidant capacity (1.40 than the hexane one (0.15. This traditional method helps to extract 45 % of the total oil. It gives oil free of organic solvent, with good physico-chemical properties that could be useful as edible oil and for industrial applications.

  11. Isolation and physico-chemical characterization of Butea parviflora seed oil

    International Nuclear Information System (INIS)

    Kaki, S.S.; Jabeen, T.; Reddy, J.R.C.; Ram Mohan, M.; Anjaneyulu, E.; Prasad, R.B.N.; Rao, B.V.S.K

    2016-01-01

    The seeds of Butea parviflora were investigated for oil extraction and the oil was studied for complete physico-chemical properties. The fatty acid profile of the seed oil showed oleic acid (18:1) at 27.5%, linoleic acid (18:2) at 26.4%, palmitic acid (16:0) at 16.1% and behenic acid (22:0) at 14.1% as the major fatty acids. The physico-chemical characteristics of the seed oil were studied for parameters such as free fatty acids (0.71%), iodine value (76.2 g/100g), peroxide value (5.95 ppm), saponification value (177.32 mg KOH/g), unsaponifiable matter (0.82%), phosphorous content (197 ppm), triglyceride analysis, tocols, specific gravity and refractive index following standard procedures. [es

  12. Physico-chemical analysis and sensory evaluation of bread ...

    African Journals Online (AJOL)

    This study carried out the physico-chemical analysis and sensory evaluation of bread produced using different indigenous yeast isolates in order to offer an insight into the overall quality of the bread. Four (4) different yeast species were isolated from sweet orange, pineapple and palm wine. The yeasts were characterized ...

  13. Physico-chemical characteristics of Anopheles breeding sites ...

    African Journals Online (AJOL)

    ELO

    analysis of the physicochemical parameters of the water samples was carried out in the Nigerian ... Key words: Malaria, Anopheles mosquitoes, breeding habitat, physico-chemical properties. ... Anopheles mosquito has been found to breed in.

  14. Physico-Chemical Quality Of Drinking Water At Mushait, Aseer ...

    African Journals Online (AJOL)

    The physico-chemical quality study of different drinking water sources used in Khamis Mushait, southwestern, Saudi Arabia (SA) has been studied to evaluate their suitability for potable purposes. A total of 62 drinking water samples were collected randomly from bottled, desalinated and groundwater located around the ...

  15. Assessment of physico-chemical and bacteriological quality of ...

    African Journals Online (AJOL)

    user

    Water quality is a critical factor affecting human health and welfare. This study aimed at examining the physico-chemical and bacteriological quality of drinking water in Adama town. A total of 107 triplicate water samples were examined; 1 from inlet point (raw water), 1 from outlet (the water after treatment, 1 from reservoir ...

  16. On the physico-chemical characteristics of brines

    Digital Repository Service at National Institute of Oceanography (India)

    Shirodkar, P.V.; Rao, P.V.S.S.D.P.; Singbal, S.Y.S.

    Analyses of the natural brines form the salt lakes, salt pans and the artificial brines obtained after the solar desalination of seawater respectively, showed wide differences in their physico-chemical characteristics. The natural brines are markEd...

  17. Physico-chemical properties of topsoil under indigenous and exotic ...

    African Journals Online (AJOL)

    This study evaluated selected physico-chemical properties of topsoil under monoculture plantation of an indigenous tree species - Nauclea diderrichii, and those of four exotic tree species – Theobroma cacao, Gmelina arborea, Pinus caribaea and Tectona grandis, located in Omo Biosphere Reserve, Ogun State, Nigeria.

  18. Physico-chemical characteristics and Heavy metal levels in Drinking ...

    African Journals Online (AJOL)

    Michael Horsfall

    ABSTRAC: This study investigated the physico-chemical characteristics of drinking waters collected from tap, well and sachet in Sokoto metropolis in North Western Nigeria. Conductivity and pH values were determined by standard methods while elemental composition was analysed using X-ray Fluorescence spectroscopy ...

  19. Estimation for Retention Factor of Isoflavones in Physico-Chemical Properties

    International Nuclear Information System (INIS)

    Lee, Seung Ki; Row, Kyung Ho

    2003-01-01

    The estimation of retention factors by correlation equations with physico-chmical properties maybe helpful in chromatographic work. The physico-chemical properties were water solubility (S), hydrophobicity (P), total energy (Et), connectivity index 1 (1χ), hydrophilic-lipophlic balance (x) and hydrophilic surface area (h) of isoflavones. The retention factors were experimentally measured by RP-HPLC. Especially, the empirical regulations of water solubility and hydrophobicity were expressed in a linear form. The equation between retention factors and various physico-chemical properties of isoflavones was suggested as k = a0 + a 1 log S + a2 log P Q + a3 (E t ) + a4 ( 1 χ) + a5 (x) + a6 (h), and the correlation coefficients estimated were relatively higher than 0.95. The empirical equations might be successfully used for a prediction of the various chromatographic characteristics of substances, with a similar chemical structure

  20. Formulation design of oral pediatric Acetazolamide suspension: dose uniformity and physico-chemical stability study.

    Science.gov (United States)

    Santoveña, Ana; Suárez-González, Javier; Martín-Rodríguez, Cristina; Fariña, José B

    2017-03-01

    The formulation of an active pharmaceutical ingredient (API) as oral solution or suspension in pediatrics is a habitual practice, due to the non-existence of many commercialized medicines in pediatric doses. It is also the simplest way to prepare and administer them to this vulnerable population. The design of a formulation that assures the dose and the system stability depends on the physico-chemical properties of the API. In this study, we formulate a class IV API, Acetazolamide (AZM) as suspension for oral administration to pediatric population. The suspension must comply attributes of quality, safety and efficacy for this route of administration. We use simple compounding procedures, as well as fewer pure excipients, as recommended for children. Mass and uniformity content assays and physical and chemical stability studies were performed. To quantify the API an UPLC method was used. We verified the physico-chemical stability of the suspensions and that they passed the mass test of the European Pharmacopeia (EP), but not the dose uniformity test. This reveals that AZM must be formulated as liquid forms with a more complex system of excipients (not usually indicated in pediatrics), or otherwise solid forms capable of assuring uniformity of mass and dose for every dosage unit.

  1. Physico-chemical conditions and macroinvertebrate fauna in the ...

    African Journals Online (AJOL)

    This paper examines the distribution of benthic macroinvertebrates in relation to physico-chemical conditions along 1 035km of the River Nile from Aswan High Dam to Al Kanater Barrage, Cairo. Total Dissolved Salts and several individual chemical variables showed positive linear regression with distance from Aswan.

  2. Microbiological Quality Assessment and Physico-chemical ...

    African Journals Online (AJOL)

    Two commercial poultry diets namely chick mash and grower mash were obtained from five (5) major poultry feed millers in Ilorin metropolis, Nigeria. A total of seventy – five (75) samples were collected and these diets were examined for their microbiological and physico-chemical qualities. Total bacterial counts in the chick ...

  3. Physico-chemical and organoleptic comparison of buffalo, cow and goat milk and their yogurt samples

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, N.; Elahi, S. [Kinnaird College for Women, Lahore (Pakistan). Dept. of Biotechnology

    2014-09-15

    The physico-chemical and organoleptic properties of buffalo, cow and goat milk and their respective yogurt samples were analyzed. Milk samples, 200ml each, were inoculated with sucrose, skimmed milk powder, carboxymethyl cellulose (CMC) along with varying concentrations of starter culture and incubated at 45 degree C for 5 hours for yogurt preparation. The physico-chemical parameters studied were pH, tritable acidity, ash, moisture, fat, solid-non fat, total solids, crude protein, specific gravity and total energy, whereas the organoleptic analysis included texture, taste, colour and odor. Results revealed that commercial starter culture, sucrose, CMC and skimmed milk powder, in the concentrations of 0.05%, 0.5%, 0.075% and 0.5% respectively, was the best composition for fermentation. The milk and yogurt of buffalo was found to be physico-chemically and organoleptically superior. However, results showed that goat milk and yogurt could be a valuable substitute, especially in comparison to cow milk and yogurt. goat, milk, yogurt, physico-chemical analysis, organoleptic analysis, carboxymethyl cellulose. (author)

  4. Physico-chemical and organoleptic comparison of buffalo, cow and goat milk and their yogurt samples

    International Nuclear Information System (INIS)

    Ahmed, N.; Elahi, S.

    2014-01-01

    The physico-chemical and organoleptic properties of buffalo, cow and goat milk and their respective yogurt samples were analyzed. Milk samples, 200ml each, were inoculated with sucrose, skimmed milk powder, carboxymethyl cellulose (CMC) along with varying concentrations of starter culture and incubated at 45 degree C for 5 hours for yogurt preparation. The physico-chemical parameters studied were pH, tritable acidity, ash, moisture, fat, solid-non fat, total solids, crude protein, specific gravity and total energy, whereas the organoleptic analysis included texture, taste, colour and odor. Results revealed that commercial starter culture, sucrose, CMC and skimmed milk powder, in the concentrations of 0.05%, 0.5%, 0.075% and 0.5% respectively, was the best composition for fermentation. The milk and yogurt of buffalo was found to be physico-chemically and organoleptically superior. However, results showed that goat milk and yogurt could be a valuable substitute, especially in comparison to cow milk and yogurt. goat, milk, yogurt, physico-chemical analysis, organoleptic analysis, carboxymethyl cellulose. (author)

  5. Physico-chemical characteristics of water sample from Aiba Stream ...

    African Journals Online (AJOL)

    This study aimed at assessing the effectiveness of solar distillation in purification of water. The water sample collected from Aiba stream was subjected to double slope solar water distillation unit. The physico- chemical characteristics of the raw sample and the distillate were determined using standard methods. The.

  6. Influence of sanitation on the physico-chemical and microbiological ...

    African Journals Online (AJOL)

    The present study was carried out in order to evaluate the effect of chlorinated and ozonized water on the physico-chemical characteristics of broccoli, produced under organic and conventional cultivation procedures. Organic and conventional broccolis were subjected to two sanitation treatments, using chlorine and ozone, ...

  7. Physico- chemical study of Ceratitis capitata rearing diet

    International Nuclear Information System (INIS)

    El Sghiri, Mohamed Ali; Maddouri Fakri

    2005-01-01

    The inhibition of the microbial growth in the rearing diet of ceratitis capitata made it possible to increase the productivity in pupae. The follow-up of the microbial load and the physicochemical parameters of the diets used with varous microbial inhibitors (potassium sorbate in combination with sodium benzoate with varous amounts, on the one hand, and of another share, nipagine in combination with sodium benzoate also with varous amounts) during a rearing of ceratitis capitata on the laboratory scale made it possible to select the diet D as being the most favorable diet. Indeed, a stability of the physico chemical parameters as well as a weak evolution of the microbial load are noted in this diet. (author). 16 refs

  8. Physico-chemical and biological studies on water from Aries River (Romania).

    Science.gov (United States)

    Butiuc-Keul, A; Momeu, L; Craciunas, C; Dobrota, C; Cuna, S; Balas, G

    2012-03-01

    Our work was focused on physico-chemical and biological characteristics of Aries River, one of the largest rivers from Romania. Water samples were collected from 11 sites along Aries River course. We have measured de (18)O and D isotopic composition of Aries River water in these locations and correlated these data with the isotopic composition of aquatic plants and with the pollution degree. Some ions from Aries River water were also analyzed: NO(3)(-), NO(2)(-), PO(4)(3-) Cu(2+), Fe(3+). Analysis of diatom communities has been performed in order to quantify the level of water pollution of Aries River. All physico-chemical analyses revealed that the most polluted site is Abrud; the source of pollution is most probably the mining enterprise from Rosia Montana. Water isotope content increases from upstream to downstream of the locations analyzed. The structure of diatom communities is strongly influenced by the different pollution sources from this area: mine waters, industrial waters, waste products, land cleaning, tourism etc. The water eutrophication increases from upstream of Campeni to downstream of Campia Turzii. Copyright © 2011 Elsevier Ltd. All rights reserved.

  9. Effect of maturation on physico-chemical and sensory quality characteristics of custard apple wine

    Directory of Open Access Journals (Sweden)

    Vikas Kumar

    2016-12-01

    Full Text Available Recently, researchers have taken a shift to utilize the custard apple for wine preparation besides its major use in ice cream, confectionary and milk products. In the present study, an attempt has been made to study the effect of maturation on physico-chemical and sensory quality characteristics of custard apple wine. Custard apple wine was prepared as per the earlier standardized method. The wine so prepared was matured for six months. The physico-chemical analysis was conducted at every three months interval for six months and sensory evaluation was performed after six months of storage. With the maturation, a decrease in total soluble solids, total sugars, titratable acidity, ethanol, total phenols and tannins was observed, whereas, an increase in reducing sugars and pH was observed. All the sensory quality characteristics of custard apple wine increased with advancement of the maturation period except astringency. Cluster analysis of the data obtained from physico-chemical analysis revealed that there was no difference between three months and six months of storage. Physico-chemical characteristics of custard apple wine were reduced to two principal components using principal component analysis which accounted for 100% variation. In general, maturation for six months improved the quality of custard apple wine considerably.

  10. Physico-chemical characteristics of surface and groundwater in ...

    African Journals Online (AJOL)

    musa kizito ojochenemi

    drinking water recommended by the World Health Organisation except for iron which had elevated ... Key words: Obajana, water resources, physico - chemical, cation, anion and pollution. ..... Exposition (AUGA EXPO'83) Acapulco, Mexico.

  11. Synthesis, structural and physico-chemical studies of the monocrystal superconductor oxides Hg Ba2 Can-1 Cun O2n+2+δ

    International Nuclear Information System (INIS)

    Viallet-Guillen, Virginie

    1998-01-01

    The thesis presents the synthesis and the structural and physico-chemical properties of the mercury-based monocrystal superconductor oxides. The results reported in the first chapter refer to the first three members of the mercury cuprate series Hg-1201, Hg-1212 and Hg-1223. In the second chapter detailed results concerning the structure of these compounds are given highlighting the features common to all cuprates and pointing out the peculiarities of mercury phases. The third chapter presents the phase diagrams (δ, T, p(O 2 )) of the compounds HgBa 2 CuO 4+δ and HgBa 2 Ca 2 Cu 3 O 8+δ obtained by thermogravimetry under controlled atmosphere between 150 deg.C and 500 deg.C and thermodynamic equilibrium conditions. In the case of Hg-1201, the critical temperature shows a variation close to a parabolic law, with an optimal Tc of 96 K (δ≅0.10) while in Hg-1223 the Tc increases linearly with the O content up to the optimal Tc of 135 K (δ≅0.19) and decreases only by 2 K in the over-doped regime. Finally, in the fourth chapter different physical properties are reviewed. The obtained monocrystals allowed studying the resistive transitory anisotropy, the torque, the specific heat, the nuclear magnetic resonance and the Raman diffusion

  12. Physico-chemical and biotic factors influencing microalgal seed ...

    African Journals Online (AJOL)

    Physico-chemical and biotic factors influencing microalgal seed culture propagation for inoculation of a ... African Journal of Biotechnology ... used to inoculate an open raceway pond for large scale biomass production for biodiesel production.

  13. Effect of physico-chemical pretreatment on the removal efficiency of horizontal subsurface-flow constructed wetlands

    Energy Technology Data Exchange (ETDEWEB)

    Caselles-Osorio, Aracelly [Environmental Engineering Division, Hydraulics, Coastal and Environmental Engineering Department, Technical University of Catalonia, c/Jordi Girona 1-3, Modul D-1, 08034 Barcelona (Spain); Department of Biology, Atlantic University, Km 7 Higway Old Colombia Port, Barranquilla (Colombia); Garcia, Joan [Environmental Engineering Division, Hydraulics, Coastal and Environmental Engineering Department, Technical University of Catalonia, c/Jordi Girona 1-3, Modul D-1, 08034 Barcelona (Spain)]. E-mail: joan.garcia@upc.edu

    2007-03-15

    In this study, we tested the effect of a physico-chemical pretreatment on contaminant removal efficiency in two experimental horizontal subsurface-flow constructed wetlands (SSF CWs). One SSF CW was fed with settled urban wastewater, whereas the other with the same wastewater after it had undergone a physico-chemical pretreatment. The SSF CWs were operated with three different hydraulic retention times. During the experiments the effluent concentrations of COD, ammonia N and sulfate were very similar, and, therefore, the physico-chemical pretreatment did not improve the quality of the effluents. COD removal efficiency (as percentage or mass surface removal rate) was slightly greater in the SSF CW fed with pretreated wastewater. Ammonia N removal efficiency was, in general, similar in both SSF CWs and very high (80-90%). At the end of the experiments it was observed that in the SSF CW fed with settled wastewater the hydraulic conductivity decreased by a 20%. - A physico-chemical pretreatment may help to reduce the risk of clogging of subsurface-flow constructed wetlands.

  14. Effect of physico-chemical pretreatment on the removal efficiency of horizontal subsurface-flow constructed wetlands

    International Nuclear Information System (INIS)

    Caselles-Osorio, Aracelly; Garcia, Joan

    2007-01-01

    In this study, we tested the effect of a physico-chemical pretreatment on contaminant removal efficiency in two experimental horizontal subsurface-flow constructed wetlands (SSF CWs). One SSF CW was fed with settled urban wastewater, whereas the other with the same wastewater after it had undergone a physico-chemical pretreatment. The SSF CWs were operated with three different hydraulic retention times. During the experiments the effluent concentrations of COD, ammonia N and sulfate were very similar, and, therefore, the physico-chemical pretreatment did not improve the quality of the effluents. COD removal efficiency (as percentage or mass surface removal rate) was slightly greater in the SSF CW fed with pretreated wastewater. Ammonia N removal efficiency was, in general, similar in both SSF CWs and very high (80-90%). At the end of the experiments it was observed that in the SSF CW fed with settled wastewater the hydraulic conductivity decreased by a 20%. - A physico-chemical pretreatment may help to reduce the risk of clogging of subsurface-flow constructed wetlands

  15. A comparative study of physico-chemical properties of CBD and SILAR grown ZnO thin films

    Energy Technology Data Exchange (ETDEWEB)

    Jambure, S.B.; Patil, S.J.; Deshpande, A.R.; Lokhande, C.D., E-mail: l_chandrakant@yahoo.com

    2014-01-01

    Graphical abstract: Schematic model indicating ZnO nanorods by CBD (Z{sub 1}) and nanograins by SILAR (Z{sub 2}). - Highlights: • Simple methods for the synthesis of ZnO thin films. • Comparative study of physico-chemical properties of ZnO thin films prepared by CBD and SILAR methods. • CBD outperforms SILAR method. - Abstract: In the present work, nanocrystalline zinc oxide (ZnO) thin films have been successfully deposited onto glass substrates by simple and economical chemical bath deposition (CBD) and successive ionic layer adsorption reaction (SILAR) methods. These films were further characterized for their structural, optical, surface morphological and wettability properties. The X-ray diffraction (XRD) patterns for both CBD and SILAR deposited ZnO thin films reveal the highly crystalline hexagonal wurtzite structure. From optical studies, band gaps obtained are 2.9 and 3.0 eV for CBD and SILAR deposited thin films, respectively. The scanning electron microscope (SEM) patterns show growth of well defined randomly oriented nanorods and nanograins on the CBD and SILAR deposited samples, respectively. The resistivity of CBD deposited films (10{sup 2} Ω cm) is lower than that of SILAR deposited films (10{sup 5} Ω cm). Surface wettability studies show hydrophobic nature for both films. From the above results it can be concluded that CBD grown ZnO thin films show better properties as compared to SILAR method.

  16. A comparative study of physico-chemical properties of CBD and SILAR grown ZnO thin films

    International Nuclear Information System (INIS)

    Jambure, S.B.; Patil, S.J.; Deshpande, A.R.; Lokhande, C.D.

    2014-01-01

    Graphical abstract: Schematic model indicating ZnO nanorods by CBD (Z 1 ) and nanograins by SILAR (Z 2 ). - Highlights: • Simple methods for the synthesis of ZnO thin films. • Comparative study of physico-chemical properties of ZnO thin films prepared by CBD and SILAR methods. • CBD outperforms SILAR method. - Abstract: In the present work, nanocrystalline zinc oxide (ZnO) thin films have been successfully deposited onto glass substrates by simple and economical chemical bath deposition (CBD) and successive ionic layer adsorption reaction (SILAR) methods. These films were further characterized for their structural, optical, surface morphological and wettability properties. The X-ray diffraction (XRD) patterns for both CBD and SILAR deposited ZnO thin films reveal the highly crystalline hexagonal wurtzite structure. From optical studies, band gaps obtained are 2.9 and 3.0 eV for CBD and SILAR deposited thin films, respectively. The scanning electron microscope (SEM) patterns show growth of well defined randomly oriented nanorods and nanograins on the CBD and SILAR deposited samples, respectively. The resistivity of CBD deposited films (10 2 Ω cm) is lower than that of SILAR deposited films (10 5 Ω cm). Surface wettability studies show hydrophobic nature for both films. From the above results it can be concluded that CBD grown ZnO thin films show better properties as compared to SILAR method

  17. Physico-chemical characterisation of material fractions in residual and source-segregated household waste in Denmark

    DEFF Research Database (Denmark)

    Götze, Ramona; Pivnenko, Kostyantyn; Boldrin, Alessio

    2016-01-01

    differences in the physico-chemical properties of residual and source-segregated waste fractions were found for many parameters related to organic matter, but also for elements of environmental concern. Considerable differences in potentially toxic metal concentrations between the individual recyclable......Physico-chemical waste composition data are paramount for the assessment and planning of waste management systems. However, the applicability of data is limited by the regional, temporal and technical scope of waste characterisation studies. As Danish and European legislation aims for higher...... recycling rates evaluation of source-segregation and recycling chains gain importance. This paper provides a consistent up-to-date dataset for 74 physico-chemical parameters in 49 material fractions from residual and 24 material fractions from source-segregated Danish household waste. Significant...

  18. Evaluation of physico-chemical parameters of agricultural soils ...

    African Journals Online (AJOL)

    Evaluation of physico-chemical parameters of agricultural soils irrigated by the waters of the hydrolic basin of Sebou River and their influences on the transfer of trace elements into sugar crops (the case of sugar cane)

  19. Physico-Chemical Analysis and Sensory Evaluation of Bread

    African Journals Online (AJOL)

    Shuaibu et al.

    Physico-Chemical Analysis and Sensory Evaluation of Bread Produced Using ... analysis of the bread samples revealed that the moisture content ..... 72. Jarup, L. ,2003. Hazards of heavy metal contamination. Br Med. Bull; 68, pp.167-82.

  20. Physico-chemical studies on samarium soaps in solid state

    International Nuclear Information System (INIS)

    Mehrotra, K.N.; Chauhan, M.; Shukla, R.K.

    1989-01-01

    The physico-chemical characteristics of samarium soaps (caproate and caprate) in solid state were investigated by IR, X-ray diffraction and TGA measurements. The IR results revealed that the fatty acids exist in dimeric state through hydrogen bonding and samarium soaps possess partial ionic character. The X-ray diffraction measurements were used to calculate the long spacings and the results confirmed the double layer structure of samarium soaps. The decomposition reaction was found kinetically of zero order and the values of energy of activation for the decomposition process for caproate and caprate were found to be 8,0 and 7,8 kcal mol -1 , respectively. (Authors)

  1. Manual of selected physico-chemical analytical methods. IV

    International Nuclear Information System (INIS)

    Beran, M.; Klosova, E.; Krtil, J.; Sus, F.; Kuvik, V.; Vrbova, L.; Hamplova, M.; Lengyel, J.; Kelnar, L.; Zakouril, K.

    1990-11-01

    The Central Testing Laboratory of the Nuclear Research Institute at Rez has for a decade been participating in the development of analytical procedures and has been providing analyses of samples of different types and origin. The analytical procedures developed have been published in special journals and a number of them in the Manuals of analytical methods, in three parts. The 4th part of the Manual contains selected physico-chemical methods developed or modified by the Laboratory in the years 1986-1990 within the project ''Development of physico-chemical analytical methods''. In most cases, techniques are involved for non-nuclear applications. Some can find wider applications, especially in analyses of environmental samples. Others have been developed for specific cases of sample analyses or require special instrumentation (mass spectrometer), which partly restricts their applicability by other institutions. (author)

  2. Impact of physico-chemical parameters on the physiological growth ...

    African Journals Online (AJOL)

    Impact of physico-chemical parameters on the physiological growth of Arthrospira (Spirulina platensis) exogenous strain UTEXLB2340. Yahia Mustafa A Fagiri, Aisha Salleh, Saifeldin Ahmed F El-Nagerabi ...

  3. Physico-chemical findings related to the resilience of different soils ...

    African Journals Online (AJOL)

    As part of an interdisciplinary study on Sustainable Agriculture in semiarid Areas (SASA) in south-central Tanzania, soils from five different locations were investigated for their mineralogical composition and physico-chemical characteristics in order to determine their resilience in relation to land use. The results of the ...

  4. Studies on the physico-chemical parameters of Omi water body of ...

    African Journals Online (AJOL)

    In Omi water body, the physico-chemical parameters such as dissolved oxygen ranged from 1.4 to 4.8 mg/L; pH, 6.7 to 7.2; temperature, 26.5 to 31.5°C; alkalinity, 24.2 to 25.4 ppm; conductivity, 23.0 to 28.3 Ohms/cm; turbidity 0.11 to 0.15 m; and free carbon dioxide from 3.5 to 4.5 mg/L. Dissolved oxygen, pH and water ...

  5. Botanical discrimination of Greek unifloral honeys with physico-chemical and chemometric analyses.

    Science.gov (United States)

    Karabagias, Ioannis K; Badeka, Anastasia V; Kontakos, Stavros; Karabournioti, Sofia; Kontominas, Michael G

    2014-12-15

    The aim of the present study was to investigate the possibility of characterisation and classification of Greek unifloral honeys (pine, thyme, fir and orange blossom) according to botanical origin using volatile compounds, conventional physico-chemical parameters and chemometric analyses (MANOVA and Linear Discriminant Analysis). For this purpose, 119 honey samples were collected during the harvesting period 2011 from 14 different regions in Greece known to produce unifloral honey of good quality. Physico-chemical analysis included the identification and semi quantification of fifty five volatile compounds performed by Headspace Solid Phase Microextraction coupled to gas chromatography/mass spectroscopy and the determination of conventional quality parameters such as pH, free, lactonic, total acidity, electrical conductivity, moisture, ash, lactonic/free acidity ratio and colour parameters L, a, b. Results showed that using 40 diverse variables (30 volatile compounds of different classes and 10 physico-chemical parameters) the honey samples were satisfactorily classified according to botanical origin using volatile compounds (84.0% correct prediction), physicochemical parameters (97.5% correct prediction), and the combination of both (95.8% correct prediction) indicating that multi element analysis comprises a powerful tool for honey discrimination purposes. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Physico-chemical quality control 131I-sodium 2-iodohippurate

    International Nuclear Information System (INIS)

    Morin, J.; Olive, E.; Issac, M.; Cruz, J.

    1992-01-01

    Some physico-chemical methods for analytical control 131 I-sodium 2-iodohippurate are compared. The most convenient to applicate in hospital and in more especialized quality control laboratories are recommended

  7. The Effect of Detergent Effluent on the Physico-Chemical ...

    African Journals Online (AJOL)

    MICHAEL HORSFALL

    2Department of Biological Sciences, Federal University of Agriculture, Abeokuta, Nigeria ... KEYWORDS: Physico-chemical characteristics, Osere stream, Plankon and Diversity ... stream is the main sources of water for most domestic.

  8. Improved ADM1 model for anaerobic digestion process considering physico-chemical reactions.

    Science.gov (United States)

    Zhang, Yang; Piccard, Sarah; Zhou, Wen

    2015-11-01

    The "Anaerobic Digestion Model No. 1" (ADM1) was modified in the study by improving the bio-chemical framework and integrating a more detailed physico-chemical framework. Inorganic carbon and nitrogen balance terms were introduced to resolve the discrepancies in the original bio-chemical framework between the carbon and nitrogen contents in the degraders and substrates. More inorganic components and solids precipitation processes were included in the physico-chemical framework of ADM1. The modified ADM1 was validated with the experimental data and used to investigate the effects of calcium ions, magnesium ions, inorganic phosphorus and inorganic nitrogen on anaerobic digestion in batch reactor. It was found that the entire anaerobic digestion process might exist an optimal initial concentration of inorganic nitrogen for methane gas production in the presence of calcium ions, magnesium ions and inorganic phosphorus. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Levels of Some Heavy Metals and Physico Chemical Properties of ...

    African Journals Online (AJOL)

    In this study, the concentrations of selected heavy meyals and physico-chemical characteristics of effluents from a beverage company in Rivers State, Nigeria and those of the receiving Woji River were evaluated to ascertain the efficiency of the company's waste treatment processes. The results showed that the contents of ...

  10. Physico-chemical properties of Nigerian pumpkin ( Curcurbita pepo ...

    African Journals Online (AJOL)

    Physico-chemical properties of Nigerian pumpkin (Curcurbita pepo) seed oil. NC Ihediohanma, CN Ubbaonu, ENT Akobundu, EOI Banigo. Abstract. No Abstract. Nigerian Food Journal Vol. 24(1) 2006: 123-126. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  11. Microbiological and Physico-chemical Analysis of Compost and its ...

    African Journals Online (AJOL)

    microbial counts, the physico-chemical parameters of compost and to assess the ... showed that application of municipal solid waste ... cattle manure and food wastes (leaves of avocado, .... Organic matter is decomposed and transformed to.

  12. Physico-chemical thresholds in the distribution of fish species among French lakes

    Directory of Open Access Journals (Sweden)

    Roubeix Vincent

    2017-01-01

    Full Text Available The management of lakes requires the definition of physico-chemical thresholds to be used for ecosystem preservation or restoration. According to the European Water Framework Directive, the limits between physico-chemical quality classes must be set consistently with biological quality elements. One way to do this consists in analyzing the response of aquatic communities to environmental gradients across monitoring sites and in identifying ecological community thresholds, i.e. zones in the gradients where the species turnover is the highest. In this study, fish data from 196 lakes in France were considered to derive ecological thresholds using the multivariate method of gradient forest. The analysis was performed on 25 species and 36 environmental parameters. The results revealed the highest importance of maximal water temperature in the distribution of fish species. Other important parameters included geographical factors, dissolved organic carbon concentration and water transparency, while nutrients appeared to have low influence. In spite of the diversity of species responses to the gradients, community thresholds were detected in the gradients of the most important physico-chemical parameters and of total phosphorus and nitrate concentrations as well. The thresholds identified in such macroecological study may highlight new patterns of species natural distribution and improve niche characterization. Moreover, when factors that may be influenced by human activities are involved, the thresholds could be used to set environmental standards for lake preservation.

  13. Characterization of Olive Oil by Ultrasonic and Physico-chemical Methods

    Science.gov (United States)

    Alouache, B.; Khechena, F. K.; Lecheb, F.; Boutkedjirt, T.

    Olive oil excels by its nutritional and medicinal benefits. It can be consumed without any treatment. However, its quality can be altered by inadequate storage conditions or if it is mixed with other kinds of oils. The objective of this work is to demonstrate the ability of ultrasonic methods to characterize and control olive oil quality. By using of a transducer of 2.25 MHz nominal frequency, in pulse echo mode, ultrasonic parameters, such as propagation velocity and attenuation,have been measured for pure olive oil and for its mixtures with sunflower oil at different proportions. Mechanical properties, such as density and viscosity, have also been determined. The results of ultrasonic measurements are consistent with those obtained by physico-chemical methods, such as rancidity degree, acid index, UV specific extinction coefficient and viscosity. They show that the ultrasonic method allows to distinguish between mixtures at different proportions. The study allows concluding that ultrasound techniques can be considered as a useful complement to existing physico-chemical analysis techniques.

  14. THE BACTERIOLOGICAL AND PHYSICO-CHEMICAL STUDIES ON OLUMIRIN WATERFALL ERIN- IJESHA, OSUN STATE, NIGERIA

    Directory of Open Access Journals (Sweden)

    Oluwakemi Akindolapo

    2011-10-01

    Full Text Available The potability and qualities of Olumirin waterfall, Erin-Ijesa were investigated by determining the total bacteria and coliform count with antibiotic susceptibility of the isolated bacteria and physico-chemical qualities of the water samples. Total bacteria and coliform enumeration were determined using pour plating and multiple tube techniques, the antibiotic susceptibility were carried out using disc diffusion method, while physico-chemical and mineral studies were also carried out using standard methods. The mean total viable count of the water samples ranged 14.8 x 102 CFU.ml-1 - 21.3 x 103 CFU.ml-1 while the coliform count ranged 13 -175 MPN/100ml. The identified bacteria isolates and their percentage distribution were E.coli (43.1%, Klebsiella spp (20.7%, Proteus spp (12.1%, Salmonella spp (6.99%, Pseudomonas spp (5.17%, Shigella spp (6.9%, and Enterococcus spp (5.17 %. Antibiotic resistance shown by bacteria isolates were exhibited as follow; Nalixidic acid (31%, Ampicilin (76%, Cotrimoxazole (60%, Gentamicin (19%, Nitrofurantoin (24%, Colitin (48%, Streptomycin (34% and tetracycline (52%. 82.8% of the isolate exhibited multiple antibiotic resistance. The physico-chemical analysis also revealed the presence of some mineral elements in the water samples. The mineral value of the water samples include; magnesium (84.8 - 93.4 mg.L-1, phosphate (12.6 - 17.1 mg.L-1, sodium (47.8 - 87.6 mg.L-1, potassium (76.6 - 104.5 mg.L-1, chloride (59.0 - 90.2 mg.L-1, zinc (0.75 - 1.82 mg.L-1, lead (0.12 - 0.33 mg.L-1, iron (0.52 - 0.60 mg.L-1, copper (0.12 - 0.27 mg.L-1 while nickel and arsenic were not detected in any of the water samples. Comparing the experimental results with the international water standard for natural water, the waterfall is not fit for consumption or for any domestic purpose unless being treated. Also, problems that may arise from the resistance bacteria strains can be tackled while the new antibiotics can also be developed.

  15. Physico chemical evaluation of coffee husk, wastes of enset (Enset ...

    African Journals Online (AJOL)

    Physico chemical evaluation of coffee husk, wastes of enset (Enset ventricosum), vegetable and khat (Catha edulis) through vermicomposting employing an epigeic earthworm Dendrobaena veneta (Rosa, 1886)

  16. Description and comparative study of physico-chemical parameters of the teleost fish skin mucus.

    Science.gov (United States)

    Guardiola, Francisco A; Cuartero, María; Del Mar Collado-González, María; Arizcún, Marta; Díaz Baños, F Guillermo; Meseguer, José; Cuesta, Alberto; Esteban, María A

    2015-01-01

    The study of mucosal surfaces, and in particular the fish skin and its secreted mucus, has been of great interest recently among immunologists. Measurement of the viscosity and other physico-chemical parameters (protein concentration, pH, conductivity, redox potential, osmolality and density) of the skin mucus can help to understand its biological functions. We have used five marine species of teleost: gilthead seabream (Sparus aurata L.), European sea bass (Dicentrarchus labrax L.), shi drum (Umbrina cirrosa L.), common dentex (Dentex dentex L.) and dusky grouper (Epinephelus marginatus L.), all of them with commercial interest in the aquaculture of the Mediterranean area. Mucus showed a direct shear- and temperature-dependent viscosity, with a non-Newtonian behavior, which differed however between two groups: one with higher viscosity (D. labrax, U. cirrosa, D. dentex) and the other with lower viscosity (S. aurata, E. marginatus). In addition, there was a clear interrelation between density and osmolality, as well as between density and temperature. Taking into account that high values of viscosity should improve the barrier effect against pathogens but low values of viscosity are needed for good locomotion characteristics, our results may help elucidate the relationship between physico-chemical and biological parameters of skin mucus, and disease susceptibility.

  17. Optimization of physico-chemical and nutritional parameters for ...

    African Journals Online (AJOL)

    Optimization of physico-chemical and nutritional parameters for pullulan production by a mutant of thermotolerant Aureobasidium pullulans, in fed batch ... minutes, having killing rate of 70% level, produced 6 g l-1 higher pullulan as compared to the wild type without loosing thermotolerant and non-melanin producing ability.

  18. Physico-chemical shelf-life indicators of meat from broilers given ...

    African Journals Online (AJOL)

    The objective of the study was to determine the effect of using Moringa oleifera leaf meal (MOLM) as an additive on physico-chemical shelf life indicators of meat from broilers. A total of 432 1-day-old chicks were randomly allocated to four treatments (TRT's). Water and feed was provided ad libitum. The feeding phases were ...

  19. Pectin gelation with chlorhexidine: Physico-chemical studies in dilute solutions.

    Science.gov (United States)

    Lascol, Manon; Bourgeois, Sandrine; Guillière, Florence; Hangouët, Marie; Raffin, Guy; Marote, Pedro; Lantéri, Pierre; Bordes, Claire

    2016-10-05

    Low methoxyl pectin is known to gel with divalent cations (e.g. Ca(2+), Zn(2+)). In this study, a new way of pectin gelation in the presence of an active pharmaceutical ingredient, chlorhexidine (CX), was highlighted. Thus chlorhexidine interactions with pectin were investigated and compared with the well-known pectin/Ca(2+) binding model. Gelation mechanisms were studied by several physico-chemical methods such as zeta potential, viscosity, size measurements and binding isotherm was determined by Proton Nuclear Magnetic Resonance Spectroscopy ((1)H NMR). The binding process exhibited similar first two steps for both divalent ions: a stoichiometric monocomplexation of the polymer followed by a dimerization step. However, stronger interactions were observed between pectin and chlorhexidine. Moreover, the dimerization step occurred under stoichiometric conditions with chlorhexidine whereas non-stoichiometric conditions were involved with calcium ions. In the case of chlorhexidine, an additional intermolecular binding occurred in a third step. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. The Impact of Refuse Dump sites on the Physico-chemical and ...

    African Journals Online (AJOL)

    The Impact of Refuse Dump sites on the Physico-chemical and Microbial Properties of ground Water in some selected areas. ... Journal of Agricultural Research and Development. Journal Home ... The pollution effect of refuse dumps on the quality of wells at Ojota, Lagos, Apete, Ibadan and Odopetu, Akure were studied.

  1. Bacteriological and physico-chemical quality of drinking water ...

    African Journals Online (AJOL)

    Background: Accesses to safe water is a universal need however, many of the world's population lack access to adequate and safe water. Consumption of water contaminated causes health risk to the public and the situation is serous in rural areas. Objectives: To assess the bacteriological and physico-chemical quality of ...

  2. Susceptibility patterns and the role of extracellular DNA in Staphylococcus epidermidis biofilm resistance to physico-chemical stress exposure.

    Science.gov (United States)

    Olwal, Charles Ochieng'; Ang'ienda, Paul Oyieng'; Onyango, David Miruka; Ochiel, Daniel Otieno

    2018-05-02

    Over 65% of human infections are ascribed to bacterial biofilms that are often highly resistant to antibiotics and host immunity. Staphylococcus epidermidis is the predominant cause of recurrent nosocomial and biofilm-related infections. However, the susceptibility patterns of S. epidermidis biofilms to physico-chemical stress induced by commonly recommended disinfectants [(heat, sodium chloride (NaCl), sodium hypochlorite (NaOCl) and hydrogen peroxide (H 2 O 2 )] in domestic and human healthcare settings remains largely unknown. Further, the molecular mechanisms of bacterial biofilms resistance to the physico-chemical stresses remain unclear. Growing evidence demonstrates that extracellular DNA (eDNA) protects bacterial biofilms against antibiotics. However, the role of eDNA as a potential mechanism underlying S. epidermidis biofilms resistance to physico-chemical stress exposure is yet to be understood. Therefore, this study aimed to evaluate the susceptibility patterns of and eDNA release by S. epidermidis biofilm and planktonic cells to physico-chemical stress exposure. S. epidermidis biofilms exposed to physico-chemical stress conditions commonly recommended for disinfection [heat (60 °C), 1.72 M NaCl, solution containing 150 μL of waterguard (0.178 M NaOCl) in 1 L of water or 1.77 M H 2 O 2 ] for 30 and 60 min exhibited lower log reductions of CFU/mL than the corresponding planktonic cells (p chemical stress induced by the four commonly recommended disinfectants than the analogous planktonic cells. Further, S. epidermidis biofilms enhanced eDNA release in response to the sub-lethal heat and oxidative stress exposure than the corresponding planktonic cells suggesting a role of eDNA in biofilms resistance to the physico-chemical stresses.

  3. EXTRACTION AND PHYSICO-CHEMICAL STUDIES OF DIASTASE-LIKE ENZYME FROM PIPER BETLE PETIOLES: PART 1

    Science.gov (United States)

    Ramasarma, G.V.S; Dutta, Sadhan Kumar

    1995-01-01

    Petioles of the plant piper betle-bengal variety have been subjected for extraction employing standard procedure and the crude extract obtained has been evaluated for its diastase like activity and other physico-chemical properties to investigate further its possible biological and pharmacological activities. PMID:22556729

  4. Physico-chemical characterization of grease interceptors with and without biological product addition.

    Science.gov (United States)

    He, Xia; Osborne, Jason; de los Reyes, Francis L

    2012-03-01

    Hardened and insoluble fat, oil, and grease (FOG) deposits are the primary cause of sewer line blockages leading to sanitary sewer overflows (SSOs). However, there have been very few long-term assessments of the physico-chemical characteristics of full-scale grease interceptors (GIs), the first "line of defense" against FOG buildup in sewer lines. In this study, we assessed the physico-chemical characteristics of two full-scale GIs (at a restaurant and a retirement community kitchen) over a one-year period. Statistically significant differences between bioaugmented and untreated cycles were detected for several chemical and physical properties. The treated cycles had lower BOD and COD at the grease interceptor outlet. While the combined data for all treated cycles did not show lower FOG concentrations in the GI outlet compared to the combined data for all untreated cycles, comparison of specific individual treated and untreated cycles show a positive effect due to the addition of product.

  5. Effects of thermal treatments and germination on physico-chemical ...

    African Journals Online (AJOL)

    Certain physico-chemical properties including viscoelasticity, crystallinity and maltose content of corn depends on the gelatinization of starch under different treatments. Three different treatments were performed; boiling in water, steam heating, and germination. The effects of gelatinization on viscoelastic property of corn ...

  6. Physico-chemical and antioxidant properties of four mango (Mangifera indica L.) cultivars in China.

    Science.gov (United States)

    Liu, Feng-Xia; Fu, Shu-Fang; Bi, Xiu-Fang; Chen, Fang; Liao, Xiao-Jun; Hu, Xiao-Song; Wu, Ji-Hong

    2013-05-01

    Four principal mango cultivars (Tainong No.1, Irwin, JinHwang and Keitt) grown in southern China were selected, and their physico-chemical and antioxidant properties were characterized and compared. Of all the four cultivars, Tainong No.1 had highest content of total phenols, ρ-coumaric acid, sinapic acid, quercetin, titratable acidity, citric acid, malic acid, fructose, higher antioxidant activities (DPPH, FRAP) and L(*), lower pH, PPO activity and individual weight. Keitt mangoes showed significantly (pmangoes exhibited significantly (pmango cultivars to be differentiated clearly based on all these physico-chemical and antioxidant properties determined in the study. Copyright © 2012 Elsevier Ltd. All rights reserved.

  7. Complete physico-chemical treatment for coke plant effluents.

    Science.gov (United States)

    Ghose, M K

    2002-03-01

    Naturally found coal is converted to coke which is suitable for metallurgical industries. Large quantities of liquid effluents produced contain a large amount of suspended solids, high COD, BOD, phenols, ammonia and other toxic substances which are causing serious pollution problem in the receiving water to which they are discharged. There are a large number of coke plants in the vicinity of Jharia Coal Field (JCF). Characteristics of the effluents have been evaluated. The present effluent treatment systems were found to be inadequate. Physico-chemical treatment has been considered as a suitable option for the treatment of coke plant effluents. Ammonia removal by synthetic zeolite, activated carbon for the removal of bacteria, viruses, refractory organics, etc. were utilized and the results are discussed. A scheme has been proposed for the complete physico-chemical treatment, which can be suitably adopted for the recycling, reuse and safe disposal of the treated effluent. Various unit process and unit operations involved in the treatment system have been discussed. The process may be useful on industrial scale at various sites.

  8. Physico-chemical properties of water in bentonite

    International Nuclear Information System (INIS)

    Torikai, Yuji; Sato, Seichi; Ohashi, Hiroshi

    1994-01-01

    As a part of safety analysis on ground layer disposal, in order to estimate nuclides migration behavior from engineering shielding materials, it is required to modelize migration process of nuclides in bentonite and chemical species relating to corrosion, to estimate solubility and to specify application condition of geochemical calculation code. In this study, as a part of elucidation of nuclide migration process, physico-chemical properties of water in bentonite and montmorillonite using steam pressure method were determined. As a result, following items were found: (1) Even if 1/3 of water in bentonite is near free water, it is far from a region dealable with dilute solution in the electrolyte solution theory. And, (2) the water in bentonite has generally small activity in comparison with dilute solution, then has smaller solubility than estimation value of calculation code. (G.K.)

  9. Physico-chemical parameters and heavy metal contents of Ibuya ...

    African Journals Online (AJOL)

    The physico-chemical parameters and heavy metal contents of Ibuya River were investigated between September 2012 and August 2013 from four stations using standard methods to etermine acceptable water quality standards and evaluate possible sustainability of a thriving fisheries cum tourist sport fishing venture.

  10. Relating physico-chemical properties of frozen green peas (Pisum sativum L.) to sensory quality.

    Science.gov (United States)

    Nleya, Kathleen M; Minnaar, Amanda; de Kock, Henriëtte L

    2014-03-30

    The acceptability of frozen green peas depends on their sensory quality. There is a need to relate physico-chemical parameters to sensory quality. In this research, six brands of frozen green peas representing product sold for retail and caterer's markets were purchased and subjected to descriptive sensory evaluation and physico-chemical analyses (including dry matter content, alcohol insoluble solids content, starch content, °Brix, residual peroxidase activity, size sorting, hardness using texture analysis and colour measurements) to assess and explain product quality. The sensory quality of frozen green peas, particularly texture properties, were well explained using physico-chemical methods of analysis notably alcohol insoluble solids, starch content, hardness and °Brix. Generally, retail class peas were of superior sensory quality to caterer's class peas although one caterer's brand was comparable to the retail brands. Retail class peas were sweeter, smaller, greener, more moist and more tender than the caterer's peas. Retail class peas also had higher °Brix, a(*) , hue and chroma values; lower starch, alcohol insoluble solids, dry matter content and hardness measured. The sensory quality of frozen green peas can be partially predicted by measuring physico-chemical parameters particularly °Brix and to a lesser extent hardness by texture analyser, alcohol insoluble solids, dry matter and starch content. © 2013 Society of Chemical Industry.

  11. IMPACT OF ADULTERATION WITH GLUCOSE, FRUCTOSE AND HYDROLYSED INULIN SYRUP ON HONEY PHYSICO-CHEMICAL PROPERTIES

    Directory of Open Access Journals (Sweden)

    Sorina ROPCIUC

    2017-03-01

    Full Text Available The aim of this study is to evaluate the influence of the adulteration with glucose, fructose, hydrolysed inulin syrup on honey physico-chemical properties (pH, aw, electrical conductivity (EC, water activity and colour parameters (L*, a*, b*, chroma of three honey samples of different botanical origins (acacia, tilia and polyfloral. The honeys were adulterated in different percentages (10%, 20%, 30%, 40% and 50% respectively with glucose, fructose and hydrolysed inulin syrup. The moisture content of all the three samples did not exceed the maximum allowable level of 20% established by the European Commission. The physico-chemical parameters (pH, aw, electrical conductivity (EC, water activity and colour parameters (L*, a*, b*, chroma of the analysed honeys are in agreement with other studies reported in the international scientific literature. The physico-chemical parameters prediction, in function of the botanical origin, adulteration agent and adulteration agent percentage have been made using the analysis of variance (ANOVA. According to the ANOVA it was observed that in the case of L*, pH and electrical conductivity (EC there is a good correlation (R2>0.90 between the parameters and the botanical origin, adulteration agent and adulteration agent percentages.

  12. Physico-chemical properties of radionuclides emitted as particulate matter

    DEFF Research Database (Denmark)

    Andersson, Kasper Grann

    2016-01-01

    This paper presents work done to improve the representation in European decision support tools of physico-chemical forms of radiocontaminants released to the atmosphere from a major nuclear power plant accident. The task is to accommodate those types of scenarios where fuel particles are at play....

  13. Physico-chemical properties and fertility status of some typic ...

    African Journals Online (AJOL)

    Physico-chemical properties and fertility status of some typic plinthaquults in bauchi loval government area of Bauchi state, Nigeria. S Mustapha. Abstract. No Abstract. IJOTAFS Vol. 1 (2) 2007: pp. 120-124. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  14. Some physico-chemical and biological characteristics of soil and ...

    African Journals Online (AJOL)

    Environmental conditions that influence biocorrosion in the Niger Delta area of Nigeria are investigated experimentally by analysing the physico-chemical and biological characteristics of four (4) soil samples and water samples taken from ten (10) selected river bodies in the region. Measured properties of the water ...

  15. Comparative study of the physico-chemical properties of rice and corn starches grown in Indian temperate climate

    Directory of Open Access Journals (Sweden)

    Abida Ali

    2016-01-01

    Full Text Available Starches isolated from the rice (Jhelum and Kohsar and corn (PS-43 and Shalimar-maize cultivars were studied for their physico-chemical and morphological properties. Physico-chemical properties such as composition, water and oil absorption capacity, swelling power, syneresis, freeze–thaw stability and light transmittance showed significant differences among the starches. Amylose contents of starches separated from the Jhelum and Kohsar rice cultivars and PS-43 and Shalimar-maize corn cultivars were 6.33%, 4.90%, 7.52% and 8.09%, respectively. The granular size varied from 5.2 to 5.9 μm for rice starches and 11.4–12.0 μm for corn starches. Transmittance value of gelatinized pastes from all starches progressively decreased up to the 2nd day during refrigerated storage, except Kohsar rice starch which lost its clarity significantly up to 3rd day of storage. The pasting property revealed peak, breakdown and setback viscosity which were in the range of 2479–3021 cP, 962–1713 cP and 1293–2003 cP respectively.

  16. Spatial Variability of Soil Morphorlogical and Physico-Chemical ...

    African Journals Online (AJOL)

    Spatial Variability of Soil Morphorlogical and Physico-Chemical Properties in Ladoke Akintola University of Technology Cashew Plantation, Ogbomoso. ... Colour (AP, B1 B2 and B3), structure (B2 and B3), stoniness (B1, B2 and B3), concretion (AP B1, B2 and B3) and boundary forms (B1, B2 and B3) have extremely ...

  17. Physico-chemical and biological characterization of urban municipal landfill leachate.

    Science.gov (United States)

    Naveen, B P; Mahapatra, Durga Madhab; Sitharam, T G; Sivapullaiah, P V; Ramachandra, T V

    2017-01-01

    Unscientific management and ad-hoc approaches in municipal solid waste management have led to a generation of voluminous leachate in urban conglomerates. Quantification, quality assessment, following treatment and management of leachate has become a serious problem worldwide. In this context, the present study investigates the physico-chemical and biological characterization of landfill leachate and nearby water sources and attempts to identify relationships between the key parameters together with understanding the various processes for chemical transformations. The analysis shows an intermediate leachate age (5-10 years) with higher nutrient levels of 10,000-12,000 mg/l and ∼2000-3000 mg/l of carbon (COD) and nitrogen (TKN) respectively. Elemental analysis and underlying mechanisms reveal chemical precipitation and co-precipitation as the vital processes in leachate pond systems resulting in accumulation of trace metals. Based on the above criteria the samples were clustered into major groups that showed a clear distinction between leachate and water bodies. The microbial analysis showed bacterial communities correlating with specific factors relevant to redox environments indicating a gradient in nature and abundance of biotic diversity with a change in leachate environment. Finally, the quality and the contamination potential of the samples were evaluated with the help of leachate pollution index (LPI) and water quality index (WQI) analysis. The study helps in understanding the contamination potential of landfill leachate and establishes linkages between microbial communities and physico-chemical parameters for effective management of landfill leachate. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Physico-chemical characteristics and Heavy metal levels in Drinking ...

    African Journals Online (AJOL)

    Physico-chemical characteristics and Heavy metal levels in Drinking Water ... composition was analysed using X-ray Fluorescence spectroscopy. Majority of the water samples had neutral pH (6.80 – 7.20) few were slightly alkaline and one was acidic. ... Heavy metals (copper and lead), rare earth metals (gallium, rubidium, ...

  19. Physico-chemical properties of a Haplic Acrisol in Southeastern ...

    African Journals Online (AJOL)

    Physico-chemical properties of a Haplic Acrisol in Southeastern Nigeria amended with rice mill waste and NPK fertilizer. ... conductivity (Ksat) and mean weight diameter (MWD) of water stable aggregates significantly by 41.1, 368.2 and 155.8%, respectively, and resulted in 20.9% significant decrease in bulk density (BD).

  20. CORRELATION OF POTENTIAL Z AND PHYSICO-CHEMICAL PARAMETERS IN EXTRACTS OF GROUND SATURATION OF THE DR03, VALLEY OF THE MEZQUITAL, HIDALGO, MEXICO

    Directory of Open Access Journals (Sweden)

    Francisco Prieto Garcia

    2009-01-01

    Full Text Available The study of physico-chemical characterization of soils sustaining crops (8912 ha of the Actopan-Ixmiquilpan zone is realised, which are irrigated with black waters. The physico-chemical characterization was realised by means of established determinations in NOM-021- RECNAT-2000 from the saturation extracts. The potential Z was moderate in these extracts and were correlated with physico-chemical parameters. From the calculated correlations it was possible to be determined that a correlation between physico-chemical properties of grounds like the pH and the potential Z exists (pZ. Also other correspondences between the values of pZ settle down, with the years of applications of the irrigation with black waters in these grounds. These studies provide the bases for later evaluations of probable affectations to the quality of grounds by the extensive use of irrigation with black waters.

  1. Physico-chemical characterization of functionalized polypropylenic fibers for prosthetic applications

    Science.gov (United States)

    Nisticò, Roberto; Faga, Maria Giulia; Gautier, Giovanna; Magnacca, Giuliana; D'Angelo, Domenico; Ciancio, Emanuele; Piacenza, Giacomo; Lamberti, Roberta; Martorana, Selanna

    2012-08-01

    Polypropylene (PP) fibers can be manufactured to form nets which can find application as prosthesis in hernioplasty. One of the most important problem to deal with when nets are applied in vivo consists in the reproduction of bacteria within the net fibers intersections. This occurs right after the application of the prosthesis, and causes infections, thus it is fundamental to remove bacteria in the very early stage of the nets application. This paper deals with the physico-chemical characterization of such nets, pre-treated by atmospheric pressure plasma dielectric barrier discharge apparatus (APP-DBD) and functionalized with an antibiotic drug such as chitosan. The physico-chemical characterization of sterilized nets, before and after the functionalization with chitosan, was carried out by means of scanning electron microscopy (SEM) coupled with EDS spectroscopy, FTIR spectroscopy, drop shape analysis (DSA), X-ray diffraction and thermal analyses (TGA and DSC). The aim of the work is to individuate a good strategy to characterize this kind of materials, to understand the effects of polypropylene pre-treatment on functionalization efficiency, to follow the materials ageing in order to study the effects of the surface treatment for in vivo applications.

  2. Physico-chemical characterization of functionalized polypropylenic fibers for prosthetic applications

    International Nuclear Information System (INIS)

    Nisticò, Roberto; Faga, Maria Giulia; Gautier, Giovanna; Magnacca, Giuliana; D’Angelo, Domenico; Ciancio, Emanuele; Piacenza, Giacomo; Lamberti, Roberta; Martorana, Selanna

    2012-01-01

    Polypropylene (PP) fibers can be manufactured to form nets which can find application as prosthesis in hernioplasty. One of the most important problem to deal with when nets are applied in vivo consists in the reproduction of bacteria within the net fibers intersections. This occurs right after the application of the prosthesis, and causes infections, thus it is fundamental to remove bacteria in the very early stage of the nets application. This paper deals with the physico-chemical characterization of such nets, pre-treated by atmospheric pressure plasma dielectric barrier discharge apparatus (APP-DBD) and functionalized with an antibiotic drug such as chitosan. The physico-chemical characterization of sterilized nets, before and after the functionalization with chitosan, was carried out by means of scanning electron microscopy (SEM) coupled with EDS spectroscopy, FTIR spectroscopy, drop shape analysis (DSA), X-ray diffraction and thermal analyses (TGA and DSC). The aim of the work is to individuate a good strategy to characterize this kind of materials, to understand the effects of polypropylene pre-treatment on functionalization efficiency, to follow the materials ageing in order to study the effects of the surface treatment for in vivo applications.

  3. Estimation of The Physico-Chemical Parameters in Marine Environment (Yumurtalik Bight- Iskenderun Bay

    Directory of Open Access Journals (Sweden)

    Gökhan Tamer Kayaalp

    2016-02-01

    Full Text Available The study was carried out to estimate the temperature, light intensity, salinity, Dissolved O2 (DO, pH values and the biotic parameter chlorophyll- a in the water column related with the depth. Because, the physico-chemical parameters affect greatly both primary and secondary producers in marine life. For this purpose the physico-chemical properties were determined day and night for 40 meter depth during the eight days. The means were compared by using the analysis of variance method and Duncan’s Multiple Comparison Test. Also physico-chemical parameters were estimated by using the analysis of regression and correlation. The effect of temperature and salinity were found significant according to the result of the analysis of variance during the day. Also the similar results were found for the night. While the effect of the depth on the chloropyll-a a was significant in the night, the effect of the depth on the DO was not significant in the day and night. The correlations among the depth and the parameters were defined. It was found the negative correlation between the depth and the temperature and light intensity. Determination coefficient of the model for salinity was also found different for day time. The correlation values among the depth and the temperature, salinity and pH were found different for the night.

  4. Effects of rumen digesta on the physico-chemical properties of soils ...

    African Journals Online (AJOL)

    IFEOMA EDEH

    2015-06-03

    Jun 3, 2015 ... ... physico-chemical properties and crop production for food security cannot be overemphasized. ... requirements of the farming population is remote. The .... laboratory, Faculty of Agriculture, University of Nigeria, Nsukka. The.

  5. Contribution to research on the metabolism of fission product. Studies on the physico-chemical state and the metabolic fate of radio-cerium solution

    International Nuclear Information System (INIS)

    Aeberhardt, A.

    1961-01-01

    This paper describes a study of the physico-chemical state of radio-cerium in dilute solutions on the tracer scale, as a function of the pH of the solution. The way in which this radioelement is transported in the blood is studied in vitro and in vivo, with reference to the ionic or colloidal state of the radio-cerium used. The distribution of cerium amongst the various components of the blood is studied by a new method of blood fractionation and by paper electrophoresis. Evidence of a cerium globulin connection is shown in the case of ionic cerium. A study of the initial distribution of radio-cerium in rats, after intravenous administration of ionic or colloidal solutions, shows considerable differences according to the physico-chemical state of the cerium injected. (author) [fr

  6. Physico-chemical characteristics and Heavy metal levels in Drinking ...

    African Journals Online (AJOL)

    Physico-chemical characteristics and Heavy metal levels in Drinking Water sources in Sokoto metropolis in North-western Nigeria. ... Tap water samples had similar conductivity values (180 -190μS/m), sachet water samples had conductivity values ranging from 80μS/m to 260μS/m while well water samples had highest ...

  7. Physico-chemical characterization studies of activated carbon derived from Sterculia Quadrifida seed shell waste

    Directory of Open Access Journals (Sweden)

    P. Shanthi

    2014-09-01

    Full Text Available A carbonaceous adsorbent prepared from the Sterculia Quadrifida shell by various activation process, viz., Acid process, Chloride process, Carbonate process and Sulphate process are successfully reported. It shows excellent improvement in the surface characteristics. Their physico-chemical characterization studies such as bulk density, moisture content, ash content, fixed carbon content, matter, soluble in water, matter soluble in acid, pH, decolourizing power, porosity and specific gravity have been carried out to assess the suitability of these carbons as potential adsorbent for waste water treatment. The present study undertaken to evaluate the efficiency of a carbon adsorbent prepared from Sterculia Quadrifida seed shell waste for removal of dyes in aqueous solution.

  8. A new general methodology for incorporating physico-chemical transformations into multi-phase wastewater treatment process models.

    Science.gov (United States)

    Lizarralde, I; Fernández-Arévalo, T; Brouckaert, C; Vanrolleghem, P; Ikumi, D S; Ekama, G A; Ayesa, E; Grau, P

    2015-05-01

    This paper introduces a new general methodology for incorporating physico-chemical and chemical transformations into multi-phase wastewater treatment process models in a systematic and rigorous way under a Plant-Wide modelling (PWM) framework. The methodology presented in this paper requires the selection of the relevant biochemical, chemical and physico-chemical transformations taking place and the definition of the mass transport for the co-existing phases. As an example a mathematical model has been constructed to describe a system for biological COD, nitrogen and phosphorus removal, liquid-gas transfer, precipitation processes, and chemical reactions. The capability of the model has been tested by comparing simulated and experimental results for a nutrient removal system with sludge digestion. Finally, a scenario analysis has been undertaken to show the potential of the obtained mathematical model to study phosphorus recovery. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Physico-chemical laws governing solid-liquid interaction

    International Nuclear Information System (INIS)

    Schweich, D.

    1984-01-01

    Physico-chemical interactions between solutes in the aqueous phase and a natural solid are described in terms of four types of mechanisms: linear or non-linear adsorption, ion-exchange, precipitation/dissolution, and chemical reaction. Emphasis is placed on the qualitative differences in behaviour implicit in these mechanisms, attention being drawn to the respective roles of thermodynamics and kinetics. On the quantitative plane, simple theoretical models (and ones that can be used) are presented in parallel to experimental protocols necessary for measuring the interaction parameters. It is pointed out, in particular, that the concept of the distribution coefficient (Ksub(d)) is only an empirical approach to problems which could easily be 'debunked' by means of more realistic, yet at the same time simple, models. (author)

  10. Antioxidant properties, physico-chemical characteristics and proximate composition of five wild fruits of Manipur, India.

    Science.gov (United States)

    Sharma, Ph Baleshwor; Handique, Pratap Jyoti; Devi, Huidrom Sunitibala

    2015-02-01

    Antioxidant properties, physico-chemical characteristics and proximate composition of five wild fruits viz., Garcinia pedunculata, Garcinia xanthochymus, Docynia indica, Rhus semialata and Averrhoa carambola grown in Manipur, India were presented in the current study. The order of the antioxidant activity and reducing power of the fruit samples was found as R. semialata > D. indica > G. xanthochymus > A. carambola > G. pedunculata. Good correlation coefficient (R(2) > 0.99) was found among the three methods applied to determine antioxidant activity. Total phenolic content was positively correlated (R(2) = 0.960) with the antioxidant activity however, total flavonoid content was not positively correlated with the antioxidant activity. Physico-chemical and proximate composition of these fruits is documented for the first time.

  11. The influence of physico-chemical and ecological factors on the ...

    African Journals Online (AJOL)

    A survey was conducted to determine the influence of physico-chemical parameters on the distribution of freshwater snails in Manchok water intake, Kaduna State, Nigeria from January 2013 to December, 2013. A total of eight thousand, three hundred and forty one (8341) freshwater snails were collected using a long ...

  12. Physico-chemical characteristics and fatty acid profile of desert date ...

    African Journals Online (AJOL)

    Because of its growing importance as a source of food and income for dryland communities, an assessment of the physico-chemical characteristics and fatty acid profile of kernel oil in Uganda was carried out. Balanites fruit samples were collected from Katakwi, Adjumani and Moroto districts; representing the Teso, West ...

  13. Physiological and physico-chemical characterization of dietary fibre from the green seaweed Ulva fasciata Delile

    OpenAIRE

    Carvalho,AFU.; Portela,MCC.; Sousa,MB.; Martins,FS.; Rocha,FC.; Farias,DF.; Feitosa,JPA.

    2009-01-01

    This work aims to assess the potential of the green seaweed Ulva fasciata Delile as an alternative source of dietary fibre (DF). Total DF content was determined, some of its physico-chemical properties described and the physiological effects of U. fasciata meal on rats fed a hypercholesterolemic diet were investigated. U. fasciata may be considered a potential alternative source of DF with a total content of about 400 g.kg-1 (dry basis) and interesting physico-chemical properties: water reten...

  14. Exploratory multivariate modeling and prediction of the physico-chemical properties of surface water and groundwater

    Science.gov (United States)

    Ayoko, Godwin A.; Singh, Kirpal; Balerea, Steven; Kokot, Serge

    2007-03-01

    SummaryPhysico-chemical properties of surface water and groundwater samples from some developing countries have been subjected to multivariate analyses by the non-parametric multi-criteria decision-making methods, PROMETHEE and GAIA. Complete ranking information necessary to select one source of water in preference to all others was obtained, and this enabled relationships between the physico-chemical properties and water quality to be assessed. Thus, the ranking of the quality of the water bodies was found to be strongly dependent on the total dissolved solid, phosphate, sulfate, ammonia-nitrogen, calcium, iron, chloride, magnesium, zinc, nitrate and fluoride contents of the waters. However, potassium, manganese and zinc composition showed the least influence in differentiating the water bodies. To model and predict the water quality influencing parameters, partial least squares analyses were carried out on a matrix made up of the results of water quality assessment studies carried out in Nigeria, Papua New Guinea, Egypt, Thailand and India/Pakistan. The results showed that the total dissolved solid, calcium, sulfate, sodium and chloride contents can be used to predict a wide range of physico-chemical characteristics of water. The potential implications of these observations on the financial and opportunity costs associated with elaborate water quality monitoring are discussed.

  15. Prescribed fires effects on physico-chemical properties and quantity of runoff and soil erosion in a Mediterranean forest

    Science.gov (United States)

    Esteban Lucas-Borja, Manuel; Plaza Alvaréz, Pedro Antonio; Sagra, Javier; Alfaro Sánchez, Raquel; Moya, Daniel; Ferrandiz Gotor, Pablo; De las Heras Ibañez, Jorge

    2017-04-01

    Wildfires have an important influence in forest ecosystems. Contrary to high severity fire, which may have negative impacts on the ecosystems, low severity induce small changes on soil properties. Thus and in order to reduce fire risk, low-severity prescribed fires have been widely used as a fuel reduction tool and silvicultural treatment in Mediterranean forest ecosystems. However, fire may alter microsite conditions and little is known about the impact of prescribed burning on the physico-chemical properties of runoff. In this study, we compared the effects of prescribed burning on physico-chemical properties and quantity of runoff and soil erosion during twelve months after a low severity prescribed fire applied in twelve 16 m2 plot (6 burned plots and 6 control plots used for comparison) set up in the Lezuza forest (Albacete, central-eastern Spain). Physico-chemical properties and quantity of runoff and soil losses were monitored after each rainfall event (five rainfall events in total). Also, different forest stand characteristics (slope, tree density, basal area and shrub/herbal cover) affecting each plot were measured. Results showed that forest stand characteristics were very similar in all used plots. Also, physico-chemical runoff properties were highly modified after the prescribed fire, increasing water pH, carbonates, bicarbonates, total dissolved solids and organic matter content dissolved in water. Electrical conductivity, calcium, sodium, chloride and magnesium were not affected by prescribed fire. Soil losses were highly related to precipitation intensity and tree interception. Tree intercepted the rainfall and significantly reduced soil losses and also runoff quantity. In conclusion and after the first six-month experiment, the influence of prescribed fires on physico-chemical runoff properties should be taken into account for developing proper prescribed burnings guidelines.

  16. Physico-chemical characterisation of some samples of fresh milk and milk powder

    Directory of Open Access Journals (Sweden)

    Soceanu Alina

    2015-12-01

    Full Text Available Milk consumption is important in the diet of all age groups because it provides important nutrients that are essential for humans. Children are the largest consumers of milk, thus, it’s very important that milk is free of toxic compounds that can be harmful for humans. Aim of the study was to determine the physico-chemical characteristics of some samples of milk powder for different stage of baby growing and for some samples of fresh milk: raw cow’s milk, milk trade and UHT type. The following physico-chemical properties: density, pH, acidity, the presence of acetone, enzymes, antiseptics, dry substance, the ash, total fat, saponification and peroxide index, total nitrogen and protein content were determined. Comparing the values of acidity for analyzed samples it can be concluded that the powder milk acidity value is much lower than the fresh milk. The presence of antiseptics and acetone was not identified, and amylase and peroxidase were found only in raw cow's milk. The highest protein content was found for milk powder (27.22%.

  17. Program VODAM for treatment of mineral physico-chemical data, with a special application to the uranium case

    International Nuclear Information System (INIS)

    Santoma Juncadella, L.

    1972-01-01

    The VODAM program is written in FORTRAN IV language and makes a physico-chemical analysis of waters, for an element or a number of them, under investigation. A thermodynamical data files is incorporated, and is useful for a low temperature range. It is the basic nucleus for a series of programs of physico-chemical interpretation of hydrogeochemical data and automatic construction of equilibrium diagrams. (Author) 13 refs

  18. Relationship between physico-chemical characteristics and potential toxicity of PM10.

    Science.gov (United States)

    Megido, Laura; Suárez-Peña, Beatriz; Negral, Luis; Castrillón, Leonor; Suárez, Susana; Fernández-Nava, Yolanda; Marañón, Elena

    2016-11-01

    PM10 was sampled at a suburban location affected by traffic and industry in the north of Spain. The samples were analysed to determine the chemical components of PM10 (organic and elemental carbon, soluble chemical species and metals). The aim of this study was to assess the toxicity of PM10 in terms of the bulk analysis and the physico-chemical properties of the particles. Total carbon, sulphates, ammonium, chlorides and nitrates were found to be the major constituents of PM10. The contribution of the last of these was found to increase significantly with PM10 concentration (Pearson coefficient correlation of 0.7, p-value major risk to human health. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Physico-chemical studies of gamma-irradiated polyester. Impregnated cement mortar composite

    International Nuclear Information System (INIS)

    Ismail, M.R.; Afifi, M.S.

    1998-01-01

    The effect of impregnation time on the physico-chemical and mechanical properties of polyester-cement mortar composite has been investigated. The samples were soaked in unsaturated polyester resin containing 40% styrene monomer at impregnation times ranging from 1-15 hours and then exposed to 50 kGy of γ-irradiation. The effects on polymer loading, compressive strength, apparent porosity, and water absorption in addition to IR spectra and TGA of the samples were studied. It was found that, the polymer loading and compressive strength increase with the increased of soaking time up to 4 hours and there is no significant improvement of the polymer loading and strength. Whereas, the apparent porosity and water absorption behave in an opposite direction. These are attributed to the presence of polymer in the pores of the samples. IR spectra showed that, new bands appeared as result of the reaction between polyester and set cement. TGA showed that, the polyester cement composite has higher thermal stability as a compared to irradiated polyester. (author)

  20. Heavy Metal Levels and Physico-Chemical Quality of Potable Water Supply in Warri, Nigeria

    International Nuclear Information System (INIS)

    Nduka, K.C.; Orisakwe, E.O.

    2007-01-01

    The interaction between man's activities and the environment is gaining world wide attention. Warri an oil producing community in Delta State of Nigeria is faced with environmental oil pollution. Since open and underground water bodies are regarded as final recipients of most environmental pollutants, this study sought to provide data on the levels of the physico-chemical parameters and contaminants in Warri metropolitan water supply. This study investigated the cadmium, lead and chromium using Atomic Absorption Spectrophotometer, physico - chemical properties such as pH, temperature, total suspended solid TSS, total dissolved solid TDS, electrical conductivity EC, biological oxygen demand BOD, dissolved oxygen DO, chemical oxygen demand COD, and total coliform count of potable water sources in Warri. Ekpan River was found to have 1.2 mg/L of cadmium, 1.0mg/L of chromium, 1.20 mg/L of lead and 2.0 mg/L of manganese. The heavy metals levels and the pollution parameters were lowest in the borehole water samples, except pH which is more acidic in borehole water samples and conductivity which is more in well water samples in all the sampling stations. Some of the parameters were above WHO standards

  1. Mechanisms governing the physico-chemical processes of transfer in NPP circuits

    International Nuclear Information System (INIS)

    Brusakov, V.P.; Sedov, V.M.; Khitrov, Yu.A.; Rybalchenko, I.L.

    1983-01-01

    The paper deals with the theoretical physico-chemical processes of corrosion products and their radionuclide transport in NPS circuits by thermoelectromotive and electromotive forces of microgalvanic couples. The laboratory and rig test results as well as the NPP operating experience data confirm the developed theoretical concept validity

  2. Immunobiological, biochemical, and physico-chemical characteristics of Brucella lipopolysaccharide subjected to various doses of gamma radiation

    Energy Technology Data Exchange (ETDEWEB)

    Dranovskaya, E A; Shibaeva, I V [Akademiya Meditsinskikh Nauk SSSR, Moscow. Inst. Ehpidemiologii i Mikrobiologii; Khabakpasheva, N A; Rostovtseva, N A [Institut Vaktsin i Syvorotok, Moscow (USSR)

    1975-01-01

    A comparative study is presented of toxicity, serological activity, some biochemical and physico-chemical properties of the highly toxic Brucella lipopolysaccharide (LPS) and of preparations obtained as a result of gamma irradiation in doses of 1, 3, and 10 mrad on the antigen. The toxicity of LPS was found to decrease with increasing radiation dose. Irradiation with a dose of 3 mrad produced a marked decrease in the toxicity of the antigen without essentially changing its serological properties. The process of LPS detoxication under the effect of irradiation was accompanied by changes in certain biochemical and physico-chemical indices suggestive of a modification of the primary structure of the LPS molecule and of an impairment especially of its polysaccharide side chains.

  3. Immunobiological, biochemical and physico-chemical characteristics of Brucella lipopolysaccharide subjected to various doses of gamma radiation

    International Nuclear Information System (INIS)

    Dranovskaya, E.A.; Shibaeva, I.V.

    1975-01-01

    A comparative study is presented of toxicity, serological activity, some biochemical and physico-chemical properties of the highly toxic Brucella lipopolysaccharide (LPS) and of preparations obtained as a result of gamma irradiation in doses of 1, 3, and 10 mrad on the antigen. The toxicity of LPS was found to decrease with increasing radiation dose. Irradiation with a dose of 3 mrad produced a marked decrease in the toxicity of the antigen without essentially changing its serological properties. The process of LPS detoxication under the effect of irradiation was accompanied by changes in certain biochemical and physico-chemical indices suggestive of a modification of the primary structure of the LPS molecule and of an impairment especially of its polysaccharide side chains. (author)

  4. Assessment of physico-chemical parameters of Tsaeda Agam River in Mekelle City, Tigray, Ethiopia

    Directory of Open Access Journals (Sweden)

    K. Mezgebe

    2015-10-01

    Full Text Available The present work was conducted to assess the physico-chemical parameters of Tsada Agam River found in Mekelle, Tigray, Ethiopia and determine its suitability for domestic and irrigation purposes. Water samples were collected monthly for two consecutive months (February to March, 2013 at four sampling sites and analyzed for various physico-chemical parameters. The study indicated that the mean value of studied parameters, except electrical conductivity, total dissolved solids, turbidity, total alkalinity, calcium ion, sulphate ion, and total phosphorus of the river water samples were within the permissible limit of WHO for drinking water. The findings also showed the mean value of studied parameters, except sulphate ion concentration, were within the permissible limit of FAO for irrigation water. Therefore, the river water was found to be unfit for human consumption and was found to be safe and utilizable for irrigation purposes. If the quality management was properly maintained, the Tsaeda Agam River water could be utilized for a wide range of applications such as drinking and irrigation.DOI: http://dx.doi.org/10.4314/bcse.v29i3.5

  5. A study of the physico-chemical characteristics of a solid radon 222 source

    International Nuclear Information System (INIS)

    Chuiton, G.

    1990-01-01

    A solid radon 222 source is described; it is made of a manganese oxide impregnated acrylic felt disc on which radium 226 is fixed. The disc is incorporated into a scanning device allowing the passage through the felt of a radon 222 free gas (air or nitrogen) previously led to a relative humidity of air near to saturation. At the device outlet, a stable activity of radon 222 is obtained. The preparation, characteristics and radiochemical stability conditions of the 226 radium source are presented. Following a description of the scanning device, the radon 222 emanation coefficient is studied as a function of the relative humidity of air. The reliability of the device is assessed by an uncertainty calculation for the utilisation conditions recommended. Finally, an approach to the physico-chemical processes governing radon 222 emanation rate in the device is set forth [fr

  6. Studies on physico-chemical and mechanical properties of the irradiated latex modified mortar

    International Nuclear Information System (INIS)

    Yassene, A.A.M.A.

    2009-01-01

    This thesis contains three chapter; chapter(I): Introduction and literature review on:- Introduction to polymer. - Mechanism of polymer-cement co-matrix formation.-Sulphate attack. - Solidification /stabilization of heavy metal in cement mortar. chapter(II): Materials and experimental techniques that include: 1- Preparation of latex polymer films from different polymer latices of styrene butadine rubber latex (SBR), poly (styrene-acrylic ester) latex (SAE) and vinylacetate /versatic -ester copolymer latex (C2A). The effect of γ-irradiation dose on the physico - chemical and mechanical properties of different latex polymer films was studied.2- Preparation of latex polymer-modified cement mortar with different ratios of cement: latex polymer and different curing method.3- Solidification /stabilization (S/S) of electroplating heavy metal precipitate in latex polymer- modified mortar with different cement /electroplating heavy metal sludge ratio. chapter(III) results and discussion

  7. Physico-chemical and hydraulic mechanisms of radionuclide mobilization in aquatic systems

    International Nuclear Information System (INIS)

    Konoplev, A.V.; Bulgakov, A.A.; Comans, R.N.J.; Hilton, J.; Smith, J.; Madruga, M.J.; Voitsekhovich, O.V.; Sansone, U.; Kudelsky, A.V.

    1996-01-01

    This paper presents main results of joint studies carried out in frame of EC-coordinated ECP-3 Project 'Modelling and study of the mechanisms of the transfer of radioactive material from the terrestrial ecosystem to and in water bodies around Chernobyl' in part of geochemical pathways. Physico-chemical models of specific migration processes are developed and recommended for application as sub models for inclusion in the decision support system (JSP-1). Main parameters, determining the behaviour of radionuclides in aquatic ecosystems are identified and methods for their estimation in |emergency situations are proposed

  8. Comparative study on composition and abundance of major planktons and physico-chemical characteristics among two ponds and Lake Tana, Ethiopia

    Directory of Open Access Journals (Sweden)

    Wondie Zelalem Amanu

    2015-11-01

    Full Text Available Objective: To evaluate the difference in physico-chemical characteristics, composition and abundance of plankton communities owing to the supplementary feed added in fish ponds as compared to Lake Tana. Methods: Physico-chemical and biological data of plankton were collected from 3 studied sites from November 2008 to October 2009. Data were compared using One-way ANOVA to see the difference among sites. Diversity indices such as Margalef's index, Shannon-Wiener index, and evenness index were employed to describe the distribution of plankton community among the studied sites. Results: The pH value was remarkably higher in ponds water. However, conductivity and total dissolved solids were the highest in lake water. Nitrate concentration was relatively high in ponds. Zooplankton species richness was higher in lake water than ponds. The lake also had the highest mean value of both Shannon-Wiener index and evenness index in phytoplankton. Conclusions: The results revealed that the supplementary feed added to each pond had influence on nutrient content which enhanced algal biomass and productivity of the ponds. However, the pond water has to be regularly refreshed to control eutrophication.

  9. Pollution evaluation in the Shahrood River: Do physico-chemical and macroinvertebrate-based indices indicate same responses to anthropogenic activities?

    Science.gov (United States)

    Sharifinia, Moslem; Mahmoudifard, Abbas; Imanpour Namin, Javid; Ramezanpour, Zohreh; Yap, Chee Kong

    2016-09-01

    This study evaluates the impact of anthropogenic activities on the Shahrood River using water physico-chemical variables and macroinvertebrates data sets obtained over a period of 12 months between February 2012 and February 2013 at 8 sampling sites. Biotic indices i.e. FBI and BMWP based on macroinvertebrates and physico-chemical indices (MPI, HPI and NSF-WQI) were employed to evaluate the water quality status in connection with natural- and human-induced pressures. Based on physico-chemical indices, water quality was categorized as low polluted level and it is suitable for drinking purposes. The water quality based on biotic indices was related to the anthropic activities; a clear deterioration of the water quality was observed from upstream to downstream sites. The water quality along the river changed from very good (class I; reference sites) to good (class II; midstream sites) and turned into moderate (class III) and poor (class IV) quality (downstream sites). These findings indicate that biotic indices are more powerful indicators in assessing water quality than physico-chemical indices. Allocapnia, Glossosoma and Hesperoperla were exclusively related to least disturbed sites, and Naididae, Orthocladiinae and Ecdyonurus were found in sites showing notable degradation. Our results recommended that the use of macroinvertebrates could be employed as a cost-effective tool for biomonitoring and controlling of polluted riverine ecosystems in the Middle East. Finally, the results from this study may be useful not only for developing countries, but also for any organization struggling to use macroinvertebrate based indices with restricted financial resources and knowledge. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Physico-Chemical And Microbiological Quality Of Some Consumer Preferred Plain Set Yoghurts Sold In Matara Municipal Area Of Sri Lanka

    Directory of Open Access Journals (Sweden)

    K.K.G.U Hemamali

    2015-08-01

    Full Text Available As yoghurt is a health food assessment of quality of commercialized yoghurt during storage period in refrigerator is needed. Lack of data on quality parameters of yoghurt brands in Sri Lanka is impediment to consumer health. This study is an attempt to fill that gap by providing data on evaluation of the changes of physico-chemical and microbiological parameters of some plain set yoghurt sold in Matara municipal area of Sri Lanka. Five different brands of plain set yoghurt samples were collected on the basis of consumer preference for the present study. From each brand fifteen samples were analyzed by means of their physico-chemical syneresis effect pH titratable acidity total protein content and microbiological composition total plate count total yeast and mould count by using three replicates of each sample at 4 7 14 21 and 28 days intervals from production date under refrigerated condition 4 amp61616C and compared against local and international standards. All microbiological parameters and total protein content of all plain set yoghurt brands were not within the permissible range for local and international standards. Titratable acidity was only in the permissible range of local standards. All the physico-chemical parameters and microbiological parameters of collected samples were significantly affected by storage period. Good quality yoghurt of physico-chemical and microbiological parameters with hygiene conditions during processing and storage should be encouraged for consumption.

  11. Effects of pond fertilization on the physico-chemical water quality of ...

    African Journals Online (AJOL)

    The effect of fertilization on the physico-chemical water quality of six selected earthen fishponds in Ife North Local Government Area of Osun State was investigated for a period of two years sampling the ponds every other month. The fishponds were grouped with regard to fertilization practice and water flowage regime into ...

  12. Physico-Chemical-Managed Killing of Penicillin-Resistant Static and Growing Gram-Positive and Gram-Negative Vegetative Bacteria

    Science.gov (United States)

    Richmond, Robert Chaffee (Inventor); Schramm, Jr., Harry F. (Inventor); Defalco, Francis G. (Inventor); Farris, III, Alex F. (Inventor)

    2012-01-01

    Systems and methods for the use of compounds from the Hofmeister series coupled with specific pH and temperature to provide rapid physico-chemical-managed killing of penicillin-resistant static and growing Gram-positive and Gram-negative vegetative bacteria. The systems and methods represent the more general physico-chemical enhancement of susceptibility for a wide range of pathological macromolecular targets to clinical management by establishing the reactivity of those targets to topically applied drugs or anti-toxins.

  13. Distribution of Fish in the Upper Citarum River: an Adaptive Response to Physico-Chemical Properties

    Directory of Open Access Journals (Sweden)

    SUNARDI

    2012-12-01

    Full Text Available Distribution of fish in river is controlled by physico-chemical properties of the water which is affected by land-use complexity and intensity of human intervention. A study on fish distribution was carried out in the upper Citarum River to map the effects of physio-chemical properties on habitat use. A survey was conducted to collect fish and to measure the water quality both on dry and rainy season. The result showed that distribution of the fish, in general, represented their adaptive response to physico-chemical properties. The river environment could be grouped into two categories: (i clean and relatively unpolluted sites, which associated with high DO and water current, and (ii polluted sites characterized by low DO, high COD, BOD, water temperature, NO3, PO4, H2S, NH3, and surfactant. Fish inhabiting the first sites were Xiphophorus helleri, Punctius binotatus, Xiphophorus maculatus, and Oreochromis mossambicus. Meanwhile, the latter sites were inhabited by Liposarcus pardalis, Trichogaster trichopterus, and Poecilia reticulata. Knowledge about fish distribution in association with the pysico-chemical properties of water is crucial especially for the river management.

  14. Physico-chemical properties and the microflora of Moroccan black table olives

    Directory of Open Access Journals (Sweden)

    Asehraou, A.

    1992-06-01

    Full Text Available Eleven samples of Moroccan black table olives were analyzed for their microflora and the physico-chemical factors. A survey of the most frequent microorganisms including standard plate count (SPC, counts of the indicator microorganisms (total and fecal coliforms and enterococci, staphylococci. Salmonella, sporeforming bacteria (Clostridium and Bacillus and yeasts and molds was determined. The physico-chemical factors grouped pH, aw, NaCl concentration and the ADV (Acid degree value of the fatty matter. Results reported hereby showed a low microbial load except for the yeasts and molds. The values found for the physico-chemical factors (low for the pH and the aw and high for the ADV and salt content would suggest an inhibitory effect on the initial microflora charge of the black table olives.

    Se estudiaron la microflora y las propiedades físico-químicas de aceitunas negras de mesa en 11 muestras. Los microorganismos más abundantes contados incluyeron: flora mesofila total, indicadores de contaminación fecal (Coliformes totales y fecales, Enterococcus, Staphylococcus, Salmonella, esporulados (Bacillus y Clostridium y levaduras y mohos. Los análisis físico-químicos incluyeron: aw (actividad de agua, pH, índice de acidez de la materia grasa y concentración de NaCl. Los resultados nos demuestran perfiles microbianos bajos para todos los microorganismos excepto levaduras y mohos. Los valores bajos de pH y de aw, y otros elevados del índice de acidez y del contenido en sal, nos sugiere una Inhibición de estos factores sobre e! crecimiento y/o la supervivencia de la microflora de las aceitunas negras de mesa.

  15. Preliminary physico-chemical results obtained on water using new data acquisition systems for deep wells

    International Nuclear Information System (INIS)

    Vinson, J.M.; Peyrus, J.C.

    1984-02-01

    Data acquisition systems recently developed in the context of research on deep storage facilities have provided with an initial set of interesting observations for the physico-chemical study of boreholes. It is possible to make correlations between the chemical compositions of water, pH and the nature of the substrate. The sampling done at Auriat with a Gerhardt-Owen probe shows the variability in the composition of water as a function of depth. The variation in calcium content, following that of pH, is particularly notable. Examination of pH measurements is of particular interest. A general gradient correlates exactly with the nature of the substrate. Whereas steel piping has a very alkaline pH, distinct pH values correspond to the two types of granite substrate. In this general gradient, series of disturbances can be seen which correspond perfectly to fracturation zones or large fractures. These most promising preliminary results lead to believe that in situ physico-chemical measurements should be continued and developed with a view to improved evaluation of the safety of deep storage facilities

  16. Physico-chemical study on guar gum

    International Nuclear Information System (INIS)

    Mahmoud, Nahla Mubarak

    2000-05-01

    Guar plant is an annual summer plant and it can resist diseases, pests and drought. Guar gum is used in a lot of industries. The present study deals with some physical properties of two commercial grade samples of guar gum cyamopsis tetragonoloba which where produced in 1996 and 1997 seasons (S 1 and S 2 respectively). Our analytical data are compared with those of previous workers in this area and international quality. Guar gum (S 2 ) is separated into water-insoluble components. Three fractions were obtained from the water-soluble components by fractional participation using acetone. Guar gum powder is yellowish white; the water-insoluble component is brownish white. Comparison study between gum samples (S 1 and S 2 ) and water-insoluble fraction (1) and water-soluble fractions are close to each other in their physico-properties. chemical All samples and fractions contain galactomannan polysaccharide as explained by infra-red spectra.Moisture contents for the gum samples were 5.2% and 7.8% and that for the water-insoluble fraction 4.7% while that for fraction samples were 5.2%-7.5% ash contents for the gum samples was 0.81% and 1.14% and for the water-insoluble component 0.88% while the contents in the fractions between 0.5%-0.66%. Nitrogen content determination showed that the gum samples had value of 0.678% and 0.732% and water -insoluble fraction had a value of 0.118%. The values decreased in the water-soluble fractions giving 0.049%, 0.053 and 0.056%. Water-soluble component and its fractions record the following results: pH measurements showed that the water-soluble component had pH 6.70 and 6.84 while its fractions had pH 5.90 and 7.00. Viscosity measurements showed that water-soluble fractions had intrinsic viscosity of 6.4 and 6.8 dL. g -1 . The fractions derived from water-soluble fraction had intrinsic viscosity of 6.6, 7 and 7.5 dl. g -1 . Using Mark-Howink equation, calculated average molecular weights for the water-soluble components were 7.01x10 5

  17. Elaboration et études physico-chimiques de nouveaux catalyseurs moléculaires ou composites pour l'électroréduction du CO2

    OpenAIRE

    Pellissier , Aymeric

    2005-01-01

    This work deals with the synthesis and physico-chemical investigations of new bifunctional catalysts for CO2 electroreduction. In this context, a “molecular” approach and an “inorganic” one have been developed. In the “molecular” approach, the bifunctional catalysts are new heterobimetallic complexes such as [Cl(CO)3Re(L)M(Cp*)Cl]+ (L = bisdiimine ligand ; M = Ir, Rh ; Cp* = η5-pentamethyl-cyclopentadienyl). The physico-chemical properties of these complexes and intramolecular interactions be...

  18. Assessment of heavy metal removal technologies for biowaste by physico-chemical fractionation

    NARCIS (Netherlands)

    Veeken, A.H.M.; Hamelers, H.V.M.

    2003-01-01

    In the Netherlands, the heavy metal content of biowaste-compost frequently exceeds the legal standards for heavy metals. In order to assess heavy metal removal technologies, a physico-chemical fractionation scheme was developed to gain insight into the distribution of heavy metals (Cd, Cu, Pb and

  19. Alteration of Asian lacquer: in-depth insight using a physico-chemical multiscale approach.

    Science.gov (United States)

    Le Hô, Anne-Solenn; Duhamel, Chloé; Daher, Céline; Bellot-Gurlet, Ludovic; Paris, Céline; Regert, Martine; Sablier, Michel; André, Guilhem; Desroches, Jean-Paul; Dumas, Paul

    2013-10-07

    Oriental lacquer has been used in Asian countries for thousands of years as a durable and aesthetic coating material for its adhesive, consolidating, protective and decorative properties. Although these objects are made from an unusual material in Occident, Western museum collections host many lacquerwares. Curators, restorers and scientists are daily confronted with questions of their conservation and their alteration. The characterization of their conservation state is usually assessed through visual observations. However deterioration often starts at the microscopic level and cannot be detected by a simple visual inspection. Often, ageing and deterioration of artworks are connected to physical, mechanical and chemical transformations. Thus new insight into alteration of lacquer involves the monitoring of macro-, microscopic and molecular modifications, and this can be assessed from physico-chemical measurements. Non-invasive (microtopography and Scanning Electron Microscopy - SEM) and micro-invasive (infrared micro-spectroscopy using a synchrotron source - SR-μFTIR) investigations were performed to study the degradation processes of lacquers and evaluate their level of alteration. In particular, spectral decomposition and fitting procedure were performed in the 1820-1520 cm(-1) region to follow the shift of the C=O and C=C band positions during lacquer ageing. The present work proves the potential of this physico-chemical approach in conservation studies of lacquers and in the quantification of the state of alteration. It evidences chemical phenomena of alteration such as oxidation and decomposition of a lacquer polymeric network. It also demonstrates for the first time the degradation front of artificially aged lacquer and the chemical imaging of a more than 2000 years old archaeological lacquer by using SR-μFTIR.

  20. Low strength ultrasonication positively affects the methanogenic granules toward higher AD performance. Part I: Physico-chemical characteristics

    DEFF Research Database (Denmark)

    Cho, S. K.; Hwang, Yuhoon; Kim, D. H.

    2013-01-01

    To elucidate the correlation between enhanced biogas production and changed physico-chemical properties of methanogenic granules after low strength ultrasonication, in this study, the effects of low strength ultrasonication on the settling velocity, permeability, porosity, and fluid collection ef...

  1. Effect of time and storage conditions on the physical and physico-chemical characteristics of the pulp of yellow and purple passion fruit

    Directory of Open Access Journals (Sweden)

    Letícia da Silva ARAÚJO

    Full Text Available Abstract The aim of this study was evaluate the physical and physico-chemical characteristics of extracted fruit pulp of passion fruit with different skin color (yellow, light and dark purple under refrigeration temperatures and storage times. The extracted pulp of passion fruit was stored at different temperatures: 10 °C, 25 °C; - 30 °C and - 80 °C and at four different storage periods: 0; 10; 20 and 30 days. The following physical and physico-chemical characteristics of the fruit were evaluated: color of fruit peel, fruit weight, diameter, length and width of the fruit, peel thickness, peel mass, pulp mass, pulp color, juice yield, pH, soluble solids, titratable acidity and ratio. The physical and physico-chemical results indicate that all the passion fruit pulp, in natura as well as refrigerated, presented values in conformity to the identity and quality standards. The coloration of the fruit peel influenced the preservation of pulp color during the storage period and conditions. Purple fruits showed no change in the color of the pulp, even under different conservation procedures. The passion fruit pulp can be stored up to 30 days while preserving the physical and physico-chemical characteristics, similar to the pulp in natura.

  2. Physico-chemical characterization of nano-emulsions in cosmetic matrix enriched on omega-3.

    Science.gov (United States)

    Kabri, Tin-Hinan; Arab-Tehrany, Elmira; Belhaj, Nabila; Linder, Michel

    2011-09-21

    Nano-emulsions, as non-equilibrium systems, present characteristics and properties which depend not only on composition but also on their method of preparation. To obtain better penetration, nanocosmeceuticals use nano-sized systems for the delivery of active ingredients to targeted cells. In this work, nano-emulsions composed of miglyol, rapeseed oil and salmon oil were developed as a cosmetic matrix. Measurements of different physico-chemical properties of nano-emulsions were taken according to size, electrophoretic mobility, conductivity, viscosity, turbidity, cristallization and melting point. The RHLB was calculated for each formulation in order to achieve maximum stability. Both tween 80 and soya lecithin were found to stabilize formulations. The results showed that rapeseed oil and miglyol are the predominant parameters for determining the expression of results concerning the characterization of emulsion. Based on the mixture design, we achieved the optimal point using the following formulation: 56.5% rapessed oil, 35.5% miglyol, and 8% salmon oil. We considered this formulation to be the best as a nanocosmeceutical product due to the small size, good turbidity, and average HLB. This study demonstrates the influence of formulation on the physico-chemical properties of each nano-emulsion obtained by the mixture design.

  3. Effect of crosslinking on the physico-chemical properties of radiation grafted PEM fuel cell membranes

    International Nuclear Information System (INIS)

    Mohamed Mahmoud Nasef; Hamdani Saidi

    2006-01-01

    The effect of crosslinking on the physico-chemical properties of radiation grafted proton conducting membranes (PFA-g-PSSA) was investigated. The membranes were prepared by radiation induced grafting of styrene/divinylbenzene (DVB) mixtures onto poly (tetrafluoroethylene-co-perfluorovinyl either) (PFA) films followed by sulfonation reactions. The variation of DVB content in the grafting mixture was in the range of 1-4 vol %. The equivalent weight, swelling, behavior and the proton conductivity of crosslinked membranes having equal degrees of grafting prepared found to be dependent predominantly on the level of crosslinking. The obtained membranes were found to posses a good combination of physico-chemical properties that is matching the commercial Nation 117 membranes

  4. Primary productivity, phytoplankton standing crop and physico-chemical characteristics of the Antarctic and adjacent central Indian Ocean waters

    Digital Repository Service at National Institute of Oceanography (India)

    JiyalalRam, M.

    Primary productivity, phytoplankton pigments and physico-chemical properties were studied in Antarctic waters and adjoining Indian Ocean between 11 degrees and 67 degrees E longitudes from polynya region (60 degrees S) to equator during the austral...

  5. Physico-Chemical and Structural Properties of DeNOx and SO2 Oxidation Catalysts

    DEFF Research Database (Denmark)

    Masters, Stephen Grenville; Oehlers, Cord; Nielsen, Kurt

    1996-01-01

    Commercial catalysts for NOx removal and SO2 oxidation and their model systems have been investigated by spectroscopic, thermal, electrochemical and X-ray methods. Structural information on the vanadium complexes and compounds as well as physico-chemical properties for catalyst model systems have...

  6. Distribution of Fish in the Upper Citarum River: an Adaptive Response to Physico-Chemical Properties

    OpenAIRE

    SUNARDI,; KANIAWATI, KEUKEU; HUSODO, TEGUH; MALINI, DESAK MADE; ASTARI, ANNISA JOVIANI

    2012-01-01

    Distribution of fish in river is controlled by physico-chemical properties of the water which is affected by land-use complexity and intensity of human intervention. A study on fish distribution was carried out in the upper Citarum River to map the effects of physio-chemical properties on habitat use. A survey was conducted to collect fish and to measure the water quality both on dry and rainy season. The result showed that distribution of the fish, in general, represented their adaptive resp...

  7. Physico-chemical and biological study of excision-repair of UV-irradiated PHIX 174 RF DNA in vitro

    International Nuclear Information System (INIS)

    Heijneker, H.L.

    1975-01-01

    A study is presented on the excision repair of ultraviolet-irradiated PHIX 174 RFI DNA in vitro with UV-specific endonuclease from micrococcus luteus, DNA polymerase I from E. coli and DNA ligase from phage T 4 infected E. coli. Excision repair was measured by physico-chemical and by biological methods. It is shown that more than 90% of the pyrimidine dimers can be repaired in vitro and that the repaired molecules have regained full biological activity. Endonuclease III was not essential for excision repair in vitro and did not stimulate repair; from this it was concluded that UV-endo generates 3' OH endgroups. The usefulness of the methods with regard to the study of excision repair is discussed

  8. Comparison of physico-chemical properties of various lignites treated by mechanical thermal expression

    Energy Technology Data Exchange (ETDEWEB)

    Janine Hulston; Alan L. Chaffee; Christian Bergins; Karl Strauss [Monash University, Vic. (Australia). School of Chemistry and CRC for Clean Power from Lignite

    2005-12-01

    This study investigates how the Mechanical Thermal Expression (MTE) process affects the physico-chemical properties of low rank lignites sourced from Australia, Greece, and Germany. The MTE process was effective in reducing the moisture content of all three coals and resulted in significant Na reductions in both the Australian and German coals. However, the organic composition of the coals investigated remained relatively unaffected. Upon oven drying, all wet MTE products underwent significant shrinkage, the degree of which was dependent upon the temperature and pressure used during the MTE process. Upon rehydration, the oven-dried MTE products underwent significant swelling, which is most likely related to the chemical composition of the coals.

  9. Physico-chemical properties of manufactured nanomaterials - Characterisation and relevant methods. An outlook based on the OECD Testing Programme.

    NARCIS (Netherlands)

    Rasmussen, Kirsten; Rauscher, Hubert; Mech, Agnieszka; Riego Sintes, Juan; Gilliland, Douglas; González, Mar; Kearns, Peter; Moss, Kenneth; Visser, Maaike; Groenewold, Monique; Bleeker, Eric A J

    Identifying and characterising nanomaterials require additional information on physico-chemical properties and test methods, compared to chemicals in general. Furthermore, regulatory decisions for chemicals are usually based upon certain toxicological properties, and these effects may not be

  10. Leg tissue composition and physico-chemical parameters of sheep meat fed annatto coproduct

    Directory of Open Access Journals (Sweden)

    Dorgival Morais de Lima Júnior

    2017-10-01

    Full Text Available Our objective was to evaluate leg tissue composition and physico-chemical quality parameters of sheep meat fed with increasing levels of annatto coproduct. 32 male uncastrated animals without a defined breed were randomized in four treatments (0, 100, 200 and 300 g kg-1 of annatto coproduct in the DM diet. After 78 days of confinement, the animals were slaughtered and body components were recorded. Reconstituted leg weight, total muscle weight, biceps weight and semitendinosus weight showed a negative linear behavior (P 0.05 were found for leg tissue composition (%, muscle:bone ratio, relative fat or leg muscle. Meat physico-chemical parameters (color, shear force, water retention capacity and cooking losses were not affected by the inclusion of the annatto coproduct in the diet. The annatto coproduct can be included in up to 300 g kg-1 of dietary dry matter without negative effects to the leg tissue composition (% and physical parameters of confined sheep meat.

  11. Physico-chemical characterization of nano-emulsions in cosmetic matrix enriched on omega-3

    Directory of Open Access Journals (Sweden)

    Linder Michel

    2011-09-01

    Full Text Available Abstract Background Nano-emulsions, as non-equilibrium systems, present characteristics and properties which depend not only on composition but also on their method of preparation. To obtain better penetration, nanocosmeceuticals use nano-sized systems for the delivery of active ingredients to targeted cells. In this work, nano-emulsions composed of miglyol, rapeseed oil and salmon oil were developed as a cosmetic matrix. Measurements of different physico-chemical properties of nano-emulsions were taken according to size, electrophoretic mobility, conductivity, viscosity, turbidity, cristallization and melting point. The RHLB was calculated for each formulation in order to achieve maximum stability. Results Both tween 80 and soya lecithin were found to stabilize formulations. The results showed that rapeseed oil and miglyol are the predominant parameters for determining the expression of results concerning the characterization of emulsion. Based on the mixture design, we achieved the optimal point using the following formulation: 56.5% rapessed oil, 35.5% miglyol, and 8% salmon oil. We considered this formulation to be the best as a nanocosmeceutical product due to the small size, good turbidity, and average HLB. Conclusions This study demonstrates the influence of formulation on the physico-chemical properties of each nano-emulsion obtained by the mixture design.

  12. Development and characterization of an exposure platform suitable for physico-chemical, morphological and toxicological characterization of printer-emitted particles (PEPs).

    Science.gov (United States)

    Pirela, Sandra V; Pyrgiotakis, Georgios; Bello, Dhimiter; Thomas, Treye; Castranova, Vincent; Demokritou, Philip

    2014-06-01

    An association between laser printer use and emissions of particulate matter (PM), ozone and volatile organic compounds has been reported in recent studies. However, the detailed physico-chemical, morphological and toxicological characterization of these printer-emitted particles (PEPs) and possible incorporation of engineered nanomaterials into toner formulations remain largely unknown. In this study, a printer exposure generation system suitable for the physico-chemical, morphological, and toxicological characterization of PEPs was developed and used to assess the properties of PEPs from the use of commercially available laser printers. The system consists of a glovebox type environmental chamber for uninterrupted printer operation, real-time and time-integrated particle sampling instrumentation for the size fractionation and sampling of PEPs and an exposure chamber for inhalation toxicological studies. Eleven commonly used laser printers were evaluated and ranked based on their PM emission profiles. Results show PM peak emissions are brand independent and varied between 3000 to 1 300 000 particles/cm³, with modal diameters ranging from 49 to 208 nm, with the majority of PEPs in the nanoscale (printer toner) raises questions about health implications to users. The presented PEGS platform will help in assessing the toxicological profile of PEPs and the link to the physico-chemical and morphological properties of emitted PM and toner formulations.

  13. Theoretical calculations of physico-chemical and spectroscopic properties of bioinorganic systems: current limits and perspectives.

    Science.gov (United States)

    Rokob, Tibor András; Srnec, Martin; Rulíšek, Lubomír

    2012-05-21

    In the last decade, we have witnessed substantial progress in the development of quantum chemical methodologies. Simultaneously, robust solvation models and various combined quantum and molecular mechanical (QM/MM) approaches have become an integral part of quantum chemical programs. Along with the steady growth of computer power and, more importantly, the dramatic increase of the computer performance to price ratio, this has led to a situation where computational chemistry, when exercised with the proper amount of diligence and expertise, reproduces, predicts, and complements the experimental data. In this perspective, we review some of the latest achievements in the field of theoretical (quantum) bioinorganic chemistry, concentrating mostly on accurate calculations of the spectroscopic and physico-chemical properties of open-shell bioinorganic systems by wave-function (ab initio) and DFT methods. In our opinion, the one-to-one mapping between the calculated properties and individual molecular structures represents a major advantage of quantum chemical modelling since this type of information is very difficult to obtain experimentally. Once (and only once) the physico-chemical, thermodynamic and spectroscopic properties of complex bioinorganic systems are quantitatively reproduced by theoretical calculations may we consider the outcome of theoretical modelling, such as reaction profiles and the various decompositions of the calculated parameters into individual spatial or physical contributions, to be reliable. In an ideal situation, agreement between theory and experiment may imply that the practical problem at hand, such as the reaction mechanism of the studied metalloprotein, can be considered as essentially solved.

  14. Physico-chemical and antioxidant properties of two medicinal wild plants grown in Moldova region

    OpenAIRE

    Sorina Ropciuc

    2015-01-01

    The major objective of this study is to report physico-chemical (moisture, ash, protein, total phenolic compounds and ascorbic acid) and the antioxidant properties of methanol extracts of nettle (Urtica dioica L.) and typical romaine spice "leurda" (Allium ursinum, wild garlic) fresh and dried. The antioxidant properties of methanol extract of medicinal herbs were evaluated using free radical scavenging test. The phenols were extracted from the medicinal plants with methanol solvent and were ...

  15. Effects of Cow Manure, Ammonium Sulfate and Potassium Sulfate on Physico-Chemical Indices of Fruit and Leaf of Mazafati Date (Phoenix Dactylifera L.

    Directory of Open Access Journals (Sweden)

    E. Aryakia

    2018-02-01

    Full Text Available Introduction: Date palm (Phoenix dactylifera L. is one of the most important fruit species grown in Iran. This plant is mainly grown in the south of the country, where pH of soil is high, resulting in poor nutrient uptake. Furthermore, because of high yield and annual pruning of date palm, large amounts of macro and micronutrients are removed from soil. So, annual fertilizing should be applied for good performance. Research shows that use of manure alone or in combination with mineral fertilizers improves physico-chemical indices of fruits and leaves of palm trees. Regarding to high nutrition dependency of date palm, it is necessary to evaluate the effect of different fertilizers on physico-chemical indices of its leaf and fruit. The main objectives of this study were thus to evaluate the effect of cow manure, ammonium sulfate and potassium sulfate on physico-chemical indices in fruit and leaf of Mazafati date. Materials and Methods: This study was conducted in bam zone, Kerman, Iran, in 2011- 2012. The area was located at 28°53′40′′N latitude, 58°37′18′′E longitude and 1050 m above sea level. A factorial experiment in a randomized complete block design was performed during month of March. Factors included ammonium sulfate (0, 500 and 1000 g/tree, potassium sulfate (0, 750 and 1500 g/tree accompanied by cow manure (5 kg/tree. For leaf and fruit analysis, sampling was performed during month of June. Physico-chemical indices including nitrogen, potassium, iron, chlorophyll a, b and total, carotenoid, fruit weight, fruit diameter, fruit length, TSS and TSS/TA were evaluated. Chlorophyll was measured by using the method of Lichtenthaler (1987. Total soluble solid (TSS was measured by using refractometer. Statistical analysis was performed using SPSS software and the treatment means were separated by Duncan’s multiple range tests. Results and Discussion: Results showed that because of supplying nitrogen, sulfur and potassium and their

  16. Do Nanoparticle Physico-Chemical Properties and Developmental Exposure Window Influence Nano ZnO Embryotoxicity in Xenopus laevis?

    Directory of Open Access Journals (Sweden)

    Patrizia Bonfanti

    2015-07-01

    Full Text Available The growing global production of zinc oxide nanoparticles (ZnONPs suggests a realistic increase in the environmental exposure to such a nanomaterial, making the knowledge of its biological reactivity and its safe-by-design synthesis mandatory. In this study, the embryotoxicity of ZnONPs (1–100 mg/L specifically synthesized for industrial purposes with different sizes, shapes (round, rod and surface coatings (PEG, PVP was tested using the frog embryo teratogenesis assay-Xenopus (FETAX to identify potential target tissues and the most sensitive developmental stages. The ZnONPs did not cause embryolethality, but induced a high incidence of malformations, in particular misfolded gut and abdominal edema. Smaller, round NPs were more effective than the bigger, rod ones, and PEGylation determined a reduction in embryotoxicity. Ingestion appeared to be the most relevant exposure route. Only the embryos exposed from the stomodeum opening showed anatomical and histological lesions to the intestine, mainly referable to a swelling of paracellular spaces among enterocytes. In conclusion, ZnONPs differing in shape and surface coating displayed similar toxicity in X. laevis embryos and shared the same target organ. Nevertheless, we cannot exclude that the physico-chemical characteristics may influence the severity of such effects. Further research efforts are mandatory to ensure the synthesis of safer nano-ZnO-containing products.

  17. Physico-chemical characteristics of Anopheles culicifacies and Anopheles varuna breeding water in a dry zone stream in Sri Lanka

    DEFF Research Database (Denmark)

    Piyaratne, M K; Amerasinghe, F P; Amerasinghe, P H

    2005-01-01

    BACKGROUND & OBJECTIVES: Selected physico-chemical characteristics of flowing and pooled water in a stream that generated two malaria vectors, Anopheles culicifacies s.l. Giles and Anopheles varuna Iyengar, were investigated during August-September 1997 and July 1998 at the Upper Yan Oya watershed.......5% of 151 samples analysed were mosquito-positive. Logistic regression was used for statistical analysis. RESULTS: Among physico-chemical parameters, An. culicifacies (the major malaria vector in the country) was positively related only to temperature, and An. varuna (a secondary malaria vector) to calcium...

  18. a Baseline Study of Physico-Chemical Parameters and Trace Metals in Waters of Manakudy, South-West Coast of India

    Science.gov (United States)

    Subramanian, M.; Muthumanikkam, J.

    2013-05-01

    The transport of trace metals from the land to ocean has a number of different routes and efficiencies. The sources of toxic elements into the rivers to be debouched into the sea through estuaries are either weathered naturally from the soils and rocks or introduced anthropogenically from point or non-point sources, in labile form or in particulate form. However, recent studies indicate that the transport of trace elements to the aquatic environment is much more complex than what has been thought. The chemistry and ecology of an estuarine system are entirely different from the fluvial as well as the marine system. Estuarine environment is characterized by a constantly changing mixture of salt and freshwater. In the present study area Manakudy estuary is situated about 8 kilometres north west of Kanyakumari (Latitude N 08 05 21.8 and Longitude E 077 29 03.7). To gain a better understanding of the geochemical behavior of physico-chemical parameters and trace elements in the estuary and to examine variations in associated chemical changes, 20 water samples were collected throughout the Manakudy estuary, a minor river in south-western India. These samples, collected in typical dry season during 2012, were analyzed for physico-chemical parameters, dissolved major and trace elements. Our results show that dissolved Na, Mg, Ca and Cl behave conservatively along the salinity gradient. The concentration of nutrients is normal and they are due to the higher organic activity in soils as well as faster rates of chemical weathering reaction in the source region. The concentration of major ions is due to tidal influence and it increases with salinity and the nutrients do behave non-conservatively due to biogenic removal. The conservative behaviour of the trace metals with salinity has been strongly affected by the introduction of these metals by external sources. Even though the trace metals in the contaminated water have been removed and incorporated in sediments due to

  19. Physico-Chemical Properties of the Oils and Fat from Crotalaria cleomifolia Seeds

    International Nuclear Information System (INIS)

    Noor Wini Mazlan; Ikram Muhd Said

    2011-01-01

    The seeds of C. cleomifolia (locally known as kacang hantu) collected along Simpang Pulai - Berinchang Road, Cameron Highlands, was defatted with hexane and the resulting oil was analysed for their physico-chemical properties. The percentage yield of the oil was calculated as 5.3 %. The acid value (1.2 %), iodine value (85), peroxide value (0.6), saponification value (192.0) and unsaponifiable matter (2.3 %) were determined to assess the quality of the oil. The physico-chemical characterisation showed that C. cleomifolia seeds oil is unsaturated semi-drying oil, with high saponification and acidic values. The fatty acid composition of C. cleomifolia seed oil was determined by Gas Chromatography and Gas Chromatography-Mass Spectrometry (ToF). The seed oil of C. cleomifolia contained linoleic acid (57.59 %) and palmitic acid (5.07 %), the most abundant unsaturated and saturated fatty acids, respectively. The polyunsaturated triacylglycerol (TAG) in C. cleomifolia seed oil determined by reverse phase High performance Liquid Chromatography; contained as PLL (18.04 %) followed by POL + SLL (11.92 %), OOL (7.04 %) and PLLn (6.31 %). The melting and cooling point of the oil were 16.22 degree Celsius and -33.54 degree Celsius, respectively. (author)

  20. Influence of lanthanum on the physico-chemical properties of solid solutions GeS0.5Se0.5

    International Nuclear Information System (INIS)

    Murquzov, M.I.; Alekperov, A.S.; Bayramov, R.B.

    2010-01-01

    By the methods of physical-chemical analysis (X-ray, MSA, as well as measurement of microhardness and density determination) the influence of La on the physico-chemical properties of solid solutions (GeS 0 .5Se 0 .5) 1 -x(La) x was studied and its microdiagram was plotted. At room temperature the GeS 0 .5Se 0 .5 based solid solution extent 4 at. percent of La. The dependence of lanthane microhardness was studied

  1. Physico-chemical characteristics and market potential of sawdust charcoal briquette

    Energy Technology Data Exchange (ETDEWEB)

    Akowuah, Joseph O.; Kemausuor, Francis [Kwame Nkrumah Univ. of Science and Technology, Kumasi (Ghana). Dept. of Agricultural Engineering; Mitchual, Stephen J. [Univ. of Education, Winneba, Kumasi (Ghana). Dept. of Design and Technology Education

    2012-11-01

    In the absence of the widespread distribution of modern cooking fuels in developing countries, efforts are being made to utilise biomass residues which abound in most of these countries. This is intended to replace portions of firewood and charcoal and thereby reduce the cutting down of forests for fuel purposes. Briquettes from agro-residues have therefore been promoted as a better replacement to firewood and charcoals for heating, cooking and other industrial applications in both urban and rural communities. This study sought to assess the physico-chemical properties of charcoal briquettes produced in Ghana and also establish demand for and willingness of potential users to substitute charcoal and firewood with a charcoal briquette. A laboratory experiment was conducted to determine the physicochemical characteristics of the briquettes. This was done prior to the distribution of the briquette to potential users to collaborate their views or otherwise on the handling and burning characteristics of the charcoal briquette. A survey was undertaken a week later using questionnaires to access the willingness of the potential users to use the briquettes. Sixty respondents were purposively selected from households and the hospitality industry for the survey. Results of the physico-chemical assessment of the briquettes were as follows: length (75 to 120 mm), moisture content (5.7% dry basis), density (1.1 g/cm{sup 3}), ash content (2.6%), fixed carbon (20.7%), volatile matter (71%) and calorific value (4,820 kcal/kg). Responses from the survey indicated that the briquette is easy to ignite, has a long burning time and has good heat output. Respondents also observed that the briquettes did not give off sparks and had less smoke and ash content as compared to the regular charcoal they often used. Finally, 93% of the respondents indicated their willingness to use the briquettes if the price was comparable to charcoal. (orig.)

  2. Assessment of the physico-chemical properties of phases in the Na-U-Pu-O system

    International Nuclear Information System (INIS)

    Kleykamp, H.

    1990-05-01

    A critical review is given on the physico-chemical properties of phases in the Na-O, Na-U-O, Na-Pu-O and Na-U-Pu-O systems. This includes the phase diagrams as well as the crystallographic, mechanical, thermal, thermodynamic, transport, optical and chemical properties. This data is to be used for the modelling of the thermal, mechanical and chemical behaviour of defective LMFBR mixed oxide pins during and after reactor operation. (orig.) [de

  3. Effect of pre-sowing laser biostimulation of seeds on physico-chemical properties of glasshouse tomato fruits

    International Nuclear Information System (INIS)

    Koper, R.; Rybak, P.

    2000-01-01

    Paper presented results of study on the effect of pre-sowing laser biostimulation of glasshouse tomato seeds, Recento cultivar, on physico-chemical properties of yielded fruits. Tomato fruit resistance to elastic strains was tested in laboratory as well as the extract content and total acidity of fruits were analysed. Positive influence of laser treatment on tested tomato fruit properties was noted

  4. Physico-chemical study of coating plasma duplex alumina/hydroxyapatite for medical applications relation elaboration/structure/properties(dissolution/adherence/residual constraints)

    International Nuclear Information System (INIS)

    Demonet, N.

    1998-01-01

    The physico-chemical behavior of porous ceramics depositing is studied in order to use them to favour the biological fixing of hip prosthesis fixed without cement. Alumina depositing, hydroxyapatite depositing and duplex (the both together) have been realized by plasma projection on a substrate in Ti-6Al-V. Tests of dissolution have been made. An original method of sound followed by radioactive tracers has allowed to establish an order of phases degradation and to consider the kinetics of calcium ions in function of several parameters of tests. (N.C.)

  5. Physico-chemical and bacteriological parameters in a hypereutrophic lagoon (Albufera Lake, Valencia, Spain).

    Science.gov (United States)

    Aznar, R; Amaro, C; Garay, E; Alcaide, E

    1991-01-01

    Several physico-chemical parameters related to water quality, as well as saprophytic and public health-related heterotrophic bacterial groups were studied in a hypereutrophic lake (Albufera, Valencia) at different seasons. Total microscopic and viable counts were compared, and, together with faecal indicators, were determined in water samples from different sites. Heterotrophic bacteria grown on nonselective medium were identified to genus level and a diversity index was calculated. Pseudomonas-Alcaligenes was the most frequently isolated group from all sampling sites along the study, following by Moraxella, Acinetobacter, Vibrio and Aeromonas. The relationships between all parameters were searched by Principal Components Analysis (PCA).

  6. THE EFFECTS OF SPRAY-CHILLING ASSOCIATED TO CONVENTIONAL CHILLING ON MASS LOSS, BACTERIOLOGYCAL AND PHYSICO-CHEMICAL QUALITY OF BEEF CARCASS

    Directory of Open Access Journals (Sweden)

    Moacir Evandro Lage

    2006-10-01

    Full Text Available The purpose of this study was to verify the effect of conventional air chilling associated to intermittent spray-chilling treatment, on weight loss, physico-chemical and bacteriological quality of beef carcasses. Two plants of commercial beef slaughterhouse located in Goiânia and fiscalized by the Federal Inspection Service were used to develop the research. The spray-chilling treatment was accomplished in an intermittent way, commanded by acontrolled logical program, with cycles of 90 seconds, in intervals of 30 minutes, during the first 4 hours of the chilling process. Physico-chemical and bacteriological analysis were made in spray-chilled water and carcasses samples, according to recommendation of the effective legislation.The average values of carcasses weight loss of treatment group were lower to the ones verified for the control group,in both plants, A and B, (P < 0,001, showing a high economic potential. As a conclusion of physico-chemical and bacteriological analysis results of water and meat samples, it is clear that the technology of chilling beef carcasses inthe conventional system associated to spraying did not interfere in the quality of meat, and it can become an analysis object on part of official organs for sanitary regulation and fiscalization, for its definitive adoption. KEY WORDS: Spray-chilling, shrinkage, beef carcass.

  7. Effect of casein and inulin addition on physico-chemical characteristics of low fat camel dairy cream.

    Science.gov (United States)

    Ziaeifar, Leila; Labbafi Mazrae Shahi, Mohsen; Salami, Maryam; Askari, Gholam R

    2018-05-21

    The effect of the addition of the camel casein fraction on some physico-chemical properties of low fat camel milk cream was studied. Oil-in-water emulsions, 25, 30, and 35 (w/w) fat, were prepared using inulin, camel skim milk, milk fat and variable percentages of casein (1, 2, and 3% w/w). The droplet size, ζ-potential, surface protein concentration, viscosity and surface tension of low fat dairy creams was measured. Cream containing 2% (w/w) casein had better stability. The modifications in physico-chemical properties appeared to be driven by changes in particle size distribution caused by droplet aggregation. The cream containing 2% casein leads to a gradual decrease in droplet size, as the particle size decreased, apparent viscosity increased. When casein concentration increased, ζ-potential decreased due to combination of c terminal (negative charge) with the surface of fat particles but steric repulsion improved textural properties. Cream with 30% fat and 2% casein had the best result. Copyright © 2018 Elsevier B.V. All rights reserved.

  8. Journal of Chemical Sciences | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences. Anil D Naik. Articles written in Journal of Chemical Sciences. Volume 113 Issue 4 August 2001 pp 285-290 Inorganic. Design, synthesis and physico-chemical investigation of a dinuclear zinc(II) complex with a novel 'end-off' compartmental ligand · Anil D Naik Vidyanand K ...

  9. Journal of Chemical Sciences | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences. Vidyanand K Revankar. Articles written in Journal of Chemical Sciences. Volume 113 Issue 4 August 2001 pp 285-290 Inorganic. Design, synthesis and physico-chemical investigation of a dinuclear zinc(II) complex with a novel 'end-off' compartmental ligand · Anil D Naik ...

  10. IMPACT OF ADULTERATION WITH GLUCOSE, FRUCTOSE AND HYDROLYSED INULIN SYRUP ON HONEY PHYSICO-CHEMICAL PROPERTIES

    OpenAIRE

    Sorina ROPCIUC; Mircea OROIAN; Vlad OLARIU

    2017-01-01

    The aim of this study is to evaluate the influence of the adulteration with glucose, fructose, hydrolysed inulin syrup on honey physico-chemical properties (pH, aw, electrical conductivity (EC), water activity and colour parameters (L*, a*, b*, chroma)) of three honey samples of different botanical origins (acacia, tilia and polyfloral). The honeys were adulterated in different percentages (10%, 20%, 30%, 40% and 50% respectively) with glucose, fructose and hydrolysed inulin syrup. The moistu...

  11. Variation of physico-chemical characteristics with tide in Visakhapatnam harbour waters, east coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    RamaRaju, V.S.; Rao, T.V.N.; Rathod, V.

    Variations in physico-chemical parameters (DO, BOD, NO2, SiO4, PO4 suspended solids, salinity and currents) observed in the waters of main channel of Visakhapatnam Harbour over a tidal cycle in different seasons from February 1982 to January 1983...

  12. Relation between physico-chemical limnology and crustacean community in Wular Lake of Kashmir Himalaya.

    Science.gov (United States)

    Shah, Javaid Ahmad; Pandit, Ashok K

    2013-10-01

    The present study scrutinizes the seasonal variation in the distribution of crustacean zooplankton in relation to physico-chemical liminology of Wular lake. Water samples were collected from five study sites during September 2010-August 2011. Remarkable spatial and temporal variations were observed among the different study sites. Among the parameters recorded water temperature showed positive correlation with pH (p<0.01) and orthophosphate (p<0.05).Transparency showed a significant negative correlation with total alkalinity (p<0.01), free carbon dioxide (p<0.01) and ammonical nitrogen (p<0.01). Crustacean zooplankton were collected by filtering 100 L lake water through a 30 microm nytal mesh and preserved in 4% formalin. A total of 42 taxa of crustacean were recorded, among them 23 species belonged to Cladocera, 16 to Copepoda and only 3 to Ostracoda. Species diversity and density depicted an abrupt up surge on the advent of warmer period (extending from March). Among the various sites a maximum of 40 species were recorded from a single biotope (site III) against the minimum of only 17 species being recorded from site I. Bray-Curtis cluster analysis showed close similarity (0.928-0.944%) between summer and autumn in terms of species diversity. Pearson correlation coefficient of the various physico-chemical parameters of water with crustacean zooplankton depicted that not only a single but multiple factors govern over the distribution and diversity of crustacean in the lake.

  13. Influence of lanthanium atoms on the physico-chemical properties of GeS0,5Se0,5 solid solutions

    International Nuclear Information System (INIS)

    Murguzov, M.I.; Alakbarov, A.S.; Bayramov, R.B.

    2010-01-01

    By the methods of physical-chemical analysis (DTA, X-ray, MSA, as well as measurement of microhardness and density determination) the influence of La on the physico-chemical properties of solid solutions (GeS 0 ,5Se 0 ,5) 1 -x(La) x was studied and its microdiagram was plotted. At room temperature the GeS 0 ,5Se 0 ,5 based solid solid solution extent to 4 at. percent La. The dependence of lanthane microhardness was studied

  14. Synthesis, purification and physico-chemical characterization of the deuterized chloroform

    International Nuclear Information System (INIS)

    Mihaila, Vasile; Chiper, Diana

    1999-01-01

    This work refers to deuterized chloroform synthesis and purification methods. Three preparation methods of deuterized chloroform are presented. In the first method the direct chlorination of methane (CH 4 + 3Cl 2 ) in the presence of light and in an oxygen-free atmosphere results in CHCl 3 + 3HCl. The method's drawback is that the resulting product is impure, being obtained also secondary chlorinated compounds, such as CHCl, CH 2 Cl 2 and CCl 4 . The second method consists in chlorination of acetaldehyde or acetone, in basic catalysis and in halogen excess (α substitution with direct synthesis of trihalogen compound), followed by a haloform reaction (hydrolytic splitting) in the presence of chlorinated lime. This method makes use of decarbolyzing of trichlor acetate acid (as a sodium salt), what results in CL 3 CH + NaHCO 3 . This method is the most suitable for the deuterized chloroform synthesis, since the reaction takes place in absence of other hydrogen atoms (protons) and in deuterized water of 99.87% purity, according to the following reaction: Cl 3 C-COONa → (D 2 O) → Cl 2 CD + NaDCO 3 . Another advantage is that this method avoids the synthesis of secondary products, which could entail additional purifications (distillations, rectification, a.s.o.). The deuterized chloroform is separated from the deuterized sodium bicarbonate aqueous solution by washing with deuterized water, in a liquid to liquid separating funnel. After separation, deuterized chloroform is dried in nitrogen atmosphere. The characterization of the final product is carried out by nuclear magnetic resonance spectrometry. (authors)

  15. Territorial biodiversity and consequences on physico-chemical characteristics of pollen collected by honey bee colonies

    OpenAIRE

    Odoux, Jean Francois; Feuillet, Dalila; Aupinel, Pierrick; Loublier, Yves; Tasei, Jean Noel; Mateescu, Cristina

    2012-01-01

    International audience; Pollen resources may become a constraint for the honey bee in cereal farming agrosystems and thus influence honey bee colony development. This survey intended to increase knowledge on bee ecology in order to understand how farming systems can provide bee forage throughout the year. We conducted a 1-year study to investigate the flower range exploited in an agrarian environment in western France, the physico-chemical composition of honey bee-collected pollen, the territ...

  16. Physico-chemical characterization of slag waste coming from GICC thermal power plant

    Energy Technology Data Exchange (ETDEWEB)

    Acosta, A.; Aineto, M.; Iglesias, I. [Laboratory of Applied Mineralogy, Universidad de Castilla-La Mancha, Ciudad Real Madrid (Spain); Romero, M.; Rincon, J.Ma. [The Glass-Ceramics Laboratory, Insituto Eduardo Torroja de Ciencias de la Construccion, CSIC, c/Serrano Galvache s/n, 28033, Madrid (Spain)

    2001-09-01

    The new gas installations of combined cycle (GICC) thermal power plants for production of electricity are more efficient than conventional thermal power plants, but they produce a high quantity of wastes in the form of slags and fly ashes. Nowadays, these by-products are stored within the production plants with, until now, no applications of recycling in other industrial processes. In order to evaluate the capability of these products for recycling in glass and ceramics inductory, an investigation for the full characterization has been made by usual physico-chemical methods such as: chemical analysis, mineralogical analysis by XRD, granulometry, BET, DTA/TG, heating microscopy and SEM/EDX.

  17. Monitoring and Microbiological Characteristics of Physico-chemical Dates of Canned Juice by Gamma Irradiation

    International Nuclear Information System (INIS)

    Arfa, Darine

    2008-01-01

    During this work, we are interested to the survey of the effect of gamma irradiation on the conservation of the juices of the dates. The results gotten of the microbiological and physico-chemical analysis done on the four samples, show the efficiency of the method for the conservation of the juices of the dates. (Author)

  18. Analysis of physico-chemical and bacteriological quality of drinking water in Mafikeng, South Africa.

    Science.gov (United States)

    Mulamattathil, Suma George; Bezuidenhout, Carlos; Mbewe, Moses

    2015-12-01

    Mafikeng, the capital of the North West Province, receives water from two sources, namely the Molopo eye and the Modimola dam. Once treated, the potable water is mixed and supplied to the city via distribution systems. This study was designed to assess the quality of drinking water in Mafikeng and also to determine whether the water from the two sources has an impact on the mixed water quality. Physico-chemical parameters and bacteriological quality (faecal coliforms (FCs), total coliforms (TCs), heterotrophic bacteria and Peudomonas spp.) was monitored at three drinking water sites weekly for 4 months. The results revealed that the physico-chemical quality of the water was generally acceptable. The pH ranged from 5.7 ± 0.18 to 8.6 ± 0.14, the temperature ranged from 18.3 ± 0.69 to 25.1 ± 0.69 °C and the total dissolved solids (TDS) ranged from 159.9 ± 22.44 to 364.4 ± 12.44 mg/l. These values are within the target water quality range for drinking water as prescribed by WHO, Department of Water Affairs and SANS 241. What is of concern was the microbial quality of the water. FCs, TCs, heterotrophic bacteria and Pseudomonas spp. were present in some of the treated water samples. The most significant finding of this study is that all drinking water samples were positive for Pseudomonas spp. (>100/100 ml).

  19. Physico-chemical characteristics and environmental exploitation of clinoptilolite Nizny Hrabovec

    International Nuclear Information System (INIS)

    Chmielewska, E.

    1999-01-01

    The clinoptilolite tuff used in this study, active mineral content of which was measured according to standardized techniques (e.g. X-ray diffraction, ion-exchange, water-vapor desorption) was 60% enriched. Physico-chemical characteristics considered from point of view as water treatment material and compared to siliceous sand and active coal as well as to some foreign clinoptilolite samples, e.g. mineralogical and chemical composition, thermic, alkali- and acid resistance, specific gravity, surface area, porosity, shipping weight, mechanical attrition and powdering survey, adsorption capacities of clinoptilolite towards Cs, Ba, Co, Fe, I, Ag, Zn and ammonium, hydration-dehydration behaviours and selectivity properties from among a major number of cations, have been investigated. Some pilot plant experiences of drinking water treatment with enhanced ammonium concentration on the field facility close to Bratislava and of tannery waste water treatment at Moravian plant using inland clinoptilolite will be presented. Mass-balance recycling loop for regeneration constituents recovery in tannery processing industry (ammonia and chromium) has been proposed and applied during pilot studies (capacity of installations ∼ 1 m 3 /hr). Iron and ammonium removal by addition of powdered clinoptilolite tuff in chemical coagulation processes for specific polluted surface water purification has been proven, respectively. Economic evaluation of ion-exchange technology by means of clinoptilolite with chemical regeneration and regeneration recovery by air-stripping method and of biological nitrification-denitrification for model hydraulic loading rate 6000 m 3 / day was calculated as well as the operating cost of both technologies were compared and will be documented. (author)

  20. Synthesis, purification and physico-chemical characterization of the deuterized chloroform

    International Nuclear Information System (INIS)

    Mihaila, V.; Olteanu-Chiper, D.

    1999-01-01

    This work refers to deuterized chloroform synthesis and purification methods. Three methods for obtaining deuterized chloroform are presented. 1. The direct chlorination of methane, in presence of light and in oxygen-free atmosphere: CH 4 + 3 Cl 2 + ℎν→ CHCl 3 + 3 HCl. The method's drawback is that the product obtained is impure, as other chlorinated compounds such as CH 3 Cl, CH 2 Cl 2 , CCl 4 also result. 2. Chlorination of acetaldehyde or acetone, in basic catalysis and in halogen excess (α substitution with direct synthesis of trihalogen compound), followed by a haloform reaction (hydrolytic splitting) in presence of chlorinated lime: CH 3 CHO (Cl 2 /HO - )/(-HCl)Cl 3 C-CHO (CaCl 2 /HOH)/(-(HCOO) 2 Ca) CHCl 3 and CH 3 -CO-CH 3 (Cl 2 /HO)/(-HCl) Cl 3 C-CO-CH 3 (NaOH)/(-CH 3 COONa) CHCl 3 . 3. Decarboxylizing of trichloroacetate acid (as sodium salt): Cl 3 C-COONa (t deg C)/(H 2 O) Cl 3 CH + NaHCO 3 . This method is the most suitable for the deuterized chloroform synthesis since the reaction takes place in absence of other hydrogen atoms (protons) and in deuterized water 99,87% purity, according to the following reaction: Cl 3 C-COONa (t deg C)/(D 2 O) Cl 3 CD + NaDCO 3 . Another advantage is that this method avoids the synthesis of secondary products which could entail additional purifications (distillations, rectifications, a.s.o.). The deuterized chloroform is separated from the deuterized sodium bicarbonate aqueous solution by washing with deuterized water, in a liquid-to-liquid separating funnel. After separation, the deuterized chloroform is dried in nitrogen atmosphere. The characterization of the final product is carried out through Nuclear Magnetic Resonance Spectrometry. (authors)

  1. Contribution to research on the metabolism of fission product. Studies on the physico-chemical state and the metabolic fate of radio-cerium solution; Contribution a l'etude du metabolisme des produits de fission. Recherches sur l'etat physico-chimique et le devenir metabolique des solutions de radiocerium

    Energy Technology Data Exchange (ETDEWEB)

    Aeberhardt, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    This paper describes a study of the physico-chemical state of radio-cerium in dilute solutions on the tracer scale, as a function of the pH of the solution. The way in which this radioelement is transported in the blood is studied in vitro and in vivo, with reference to the ionic or colloidal state of the radio-cerium used. The distribution of cerium amongst the various components of the blood is studied by a new method of blood fractionation and by paper electrophoresis. Evidence of a cerium globulin connection is shown in the case of ionic cerium. A study of the initial distribution of radio-cerium in rats, after intravenous administration of ionic or colloidal solutions, shows considerable differences according to the physico-chemical state of the cerium injected. (author) [French] Ce travail presente une etude de l'etat physico-chimique du radiocerium en solutions diluees a l'echelle des indicateurs, en fonction du pH de la solution. En fonction de l'etat ionique ou colloidal du radiocerium utilise, le mode de transport de ce radioelement dans le sang est etudie in vitro et in vivo. La distribution du cerium entre les differents constituants du sang est etudiee par une methode nouvelle de fractionnement du sang et par electrophorese sur papier. L'existence d'une liaison cerium-globuline est mise en evidence dans le cas du cerium ionique. L'etude de la distribution initiale du radiocerium, chez le rat apres administration par voie veineuse de solutions ionique ou colloidale, montre des differences importantes en fonction de l'etat physico-chimique du cerium injecte. (auteur)

  2. PHYSICO-CHEMICAL PARAMETERS ASSESSTMENT OF CHILAR DAM WATER IN DIFFERENT SITES OF SHAJAPUR TOWN, M.P., INDIA

    OpenAIRE

    Bodane Arun Kumar

    2017-01-01

    The present investigation reveals the quality of Dam water for public consumption to determine the Dam water of Shajapur town. Physico-chemical parameters of Dam water were monitored during the study period. The parameters investigated were pH, TDS, Alkalinity, Total Hardness, Chlorides, Magnesium, Fluoride, Nitrates, Dissolve Oxygen and COD. Results obtained from the study revealed that quality of Dam water during study season is well within the permissible limit and the Dam water is safe fo...

  3. Impacts des caractéristiques physico-chimiques des eaux sur la ...

    African Journals Online (AJOL)

    The present study was undertaken to assess the impact of the physico-chemical characteristics of water on the ..... Il est composé de 4 espèces ... Figure 4 : Plan factoriel F1 x F2 des variables physico-chimiques en fonction du phytoplancton.

  4. Physico-chemical characterization of nano-emulsions in cosmetic matrix enriched on omega-3

    OpenAIRE

    Kabri, Tin-hinan; Arab-Tehrany, Elmira; Belhaj, Nabila; Linder, Michel

    2011-01-01

    Abstract Background Nano-emulsions, as non-equilibrium systems, present characteristics and properties which depend not only on composition but also on their method of preparation. To obtain better penetration, nanocosmeceuticals use nano-sized systems for the delivery of active ingredients to targeted cells. In this work, nano-emulsions composed of miglyol, rapeseed oil and salmon oil were developed as a cosmetic matrix. Measurements of different physico-chemical properties of nano-emulsions...

  5. A field study of physico-chemical states of artificial radionuclides in seawater

    International Nuclear Information System (INIS)

    Nagaya, Yutaka; Nakamura, Kiyoshi

    1974-01-01

    The physico-chemical states of artificial radionuclides, 90 Sr, 137 Cs and 144 Ce in seawater were investigated by radiochemical analysis of filtered and unfiltered seawater. The difference of radionuclide concentrations between unfiltered and filtered seawaters was defined as the ''particulate form'' radioisotope and its ''particle ratio'' was discussed. Practically no particulate 90 Sr, greater than 0.22 μ in size, was observed in both coastal and open seawaters, but some of 137 Cs seemed to be insoluble in some circumstances, especially in coastal waters. A considerable amount of 144 Ce was found to be particulate. An estimation of the radionuclides in particulate form was made for Kashima-nada seawaters collected in 1970 to 1972, and it was shown that the possible occurrence of particulate radionuclides, greater than 0.22 μ in size, were 1% or less for 90 Sr and 6% for 137 Cs. In the coastal water, 80% of 144 Ce were seemed to be in particulate form, but in the open seawater only a few %. The influences of suspended materials to 137 Cs and 144 Ce concentration levels in seawater were not negligible and further investigations are desirable. (auth.)

  6. Saclay Center of Nuclear Studies, Direction of Materials and Nuclear Fuels, Department of Physico-Chemistry, Division of Physical Chemistry. 1968 Annual report

    International Nuclear Information System (INIS)

    Schmidt, M.; Clerc, M.; Le Calve, J.; Bourene, M.; Lesigne, B.; Gillois, M.; Devillers, C.; Arvis, M.; Gilles, L.; Moreau, M.; Sutton, J.; Faraggi, M.; Desalos, J.; Tran Dinh Son; Barat, F.; Hickel, B.; Chachaty, C.; Forchioni, A.; Shiotani, M.; Larher, Y.; Maurice, P.; Le Bail, H.; Nenner, T.

    1969-03-01

    This document is the 1968 annual report of research activities at the Physico-Chemistry Department (Physical Chemistry Division), part of the Directorate of Materials and Nuclear Fuels of the CEA Saclay center of nuclear studies. The report is divided into two main parts: radiolysis and photolysis studies (gaseous phase, condensed phase), and general physico-chemical studies (sorption, molecular jets)

  7. Study of physico-chemical release of uranium and plutonium oxides during the combustion of polycarbonate and of ruthenium during the combustion of solvents used in the reprocessing of nuclear fuel

    International Nuclear Information System (INIS)

    Bouilloux, L.

    1998-01-01

    The level of consequences concerning a fire in a nuclear facility is in part estimated by the quantities and the physico-chemical forms of radioactive compounds that may be emitted out of the facility. It is therefore necessary to study the contaminant release from the fire. Because of the multiplicity of the scenarios, two research subjects were retained. The first one concerns the study of the uranium or plutonium oxides chemical release during the combustion of the polycarbonate glove box sides. The second one is about the physico chemical characterisation of the ruthenium release during the combustion of an organic solvent mixture (tributyl phosphate-dodecane) used for the nuclear fuel reprocessing. Concerning the two research subjects, the chemical release, i.e. means the generation of contaminant compounds gaseous in the fire, was modelled using thermodynamical simulations. Experiments were done in order to determine the ruthenium release factor during solvent combustion. A cone calorimeter was used for small scale experiments. These results were then validated by large scale tests under conditions close to the industrial process. Thermodynamical simulations, for the two scenarios studied. Furthermore, the experiments on solvent combustion allowed the determination of a suitable ruthenium release factor. Finally, the mechanism responsible of the ruthenium release has been found. (author)

  8. Physico-chemical technologies for nitrogen removal from wastewaters: a review

    Directory of Open Access Journals (Sweden)

    Andrea G. Capodaglio

    2015-07-01

    Full Text Available The paper examines the main physico-chemical processes for nitrogen removal from wastewaters, considering both those that have been long known and still widely applied at the industrial scale, and those that are still at the research level. Special attention is paid to the latest technological developments, as well as to operational problems and fields of application. The processes considered are briefly summarized as follows: ammonia air and steam stripping; ammonia vacuum distillation; ammonia precipitation as struvite; ammonia and nitrate removal by selected ion exchange; breakpoint chlorination; chloramine removal by selected activated carbon; ammonia adsorption on charcoal; chemical reduction of nitrate; advanced oxidation processes to convert ammonia and organic-N into nitrogen gas or nitrate. Special attention is given to advanced oxidation processes, as great research efforts are currently addressed to their implementation. These specifically include ozonation, peroxon oxidation, catalytic wet air oxidation, photo-catalytic oxidation and electrochemical oxidation.

  9. Physico - chemical characterization of gamma irradiated PVP-honey-glycerine hydrogel

    International Nuclear Information System (INIS)

    Darmawan Darwis; Lely Hardiningsih; Farah Nurlidar

    2010-01-01

    Research to investigate physico-chemical characterizatics of hydrogel wound dressing containing 6% (b/v) of honey and various concentrations of glycerine from 0-5% (b/v) has been done. Nine series of hydrogel formulas with various composition of PVP hydrogel were irradiated using gamma rays at a dose of 25 kGy. The results showed that addition of honey 6% and glycerine up to 5% lead to the formation of hydrogel with following properties: sterile, transparence, browning color, improved flexibility, conformability to skin and resistance against mould. The PVP-honey-glycerine hydrogel also showed lower water favor evaporation at 37 o C and higher water absorption properties compared to basic formula (without additional of honey and glycerine). (author)

  10. Physico-chemical properties of ready to eat, shelf-stable pasta during storage.

    Science.gov (United States)

    Carini, E; Curti, E; Cassotta, F; Najm, N E O; Vittadini, E

    2014-02-01

    The changes in physico-chemical properties of RTE shelf stable pasta were studied during storage with a multianalytical and multidimensional approach (with special focus on water status) to understand the ageing process in this product. Pasta hardness and amylopectin recrystallisation increased, macroscopic water status indicators and proton molecular translational mobility remained constant, and significant changes were measured in the proton rotational molecular mobility indicators ((1)H FID, (1)H T2) during storage. Since the main changes observed in RTE pasta during storage were similar to those observed in other cereal-based products, it would be interesting to verify the effect of the anti-staling methods commonly used in the cereal processing industry in improving RTE pasta shelf-stability. Copyright © 2013 Elsevier Ltd. All rights reserved.

  11. Physico-chemical impacts of cementitiously-derived calcium and silica on sodium montmorillonite

    International Nuclear Information System (INIS)

    Kinsela, Andrew S.; Tjitradjaja, Alice; Collins, Richard N.; Waite, T. David; Macdonald, Bennett C.T.; White, Ian; PAYNE, Timothy E.

    2012-01-01

    The storage of nuclear waste frequently involves the construction of a concrete encasement adjacent to an engineered clay barrier, which can expose the swelling clay to elevated concentrations of certain cations (particularly calcium) and very high alkalinity (pH 10 - 13). These conditions have the capacity to degrade the integrity of the clay layer and, as such, it is necessary to fully understand the effects of all possible biogeochemical interactions involved. In this study, the changes in hydraulic conductivities and other physico-chemical properties of Na-montmorillonite assemblages under the influence of both highly alkaline (pH 9 and 12) conditions and elevated concentrations of calcium and silica are examined. The Na-montmorillonite suspensions and filtration experimental method is presented, as well as the electrophoresis characterization technique

  12. Physico-chemical Status of Soil at the Site of UKM Research Centre, Tasik Chini, Pahang, Malaysia

    International Nuclear Information System (INIS)

    Sahibin Abdul Rahim; Wan Mohd Razi Idris; Zulfahmi Ali Rahman

    2011-01-01

    This study was carried out to determine the physico-chemical properties, nutrient and heavy metal contents in soil within the UKM Tasik Chini Research Centre. Top-soil samples were collected from three sampling transect namely T1, T2 and T3. Two soil profiles from transect 1 (T1S1and T1S3) were observed and soil samples were collected from the profiles as well as top-soil for physico-chemical, nutrient and heavy metal determination. For topsoil samples, four top-soil sampling stations (S1, S2, S3, S4) were chosen along T1, two sampling stations (S1 and S2) along T2 and three sampling stations (S1, S2, S3) along T3. The soil physical properties determined were particle size and organic matter, whereas chemical properties determined were pH, electrical conductivity (EC), cation exchange capacity (CEC), available phosphorus, potassium and magnesium, soluble nutrient, and selected heavy metals. All physico-chemical, nutrient and heavy metal determinations follow the normal standard procedures. Results showed that the textures of the soil were dominated by clay size particle. Organic matter content was high in the top-soil and decreased with depth. The average soil pH in the studied profile and in the top-soil was very acidic with values from 3.66 to 4.73. The average range of electrical conductivity in soil profile and top-soil was between 2412 μScm -1 and 2742 μScm -1 . The average CEC was low with a range between 4.86 and 12.58 meq/ 100 g. The concentration of available phosphorus, magnesium and potassium was between 1.76 and 3.32 μg/ g, 16.80 and 122.23 μg/ g, and 20.09 and 30.50 μg/ g, respectively. The concentration of soluble sulphate, nitrate-nitrogen, ammonium-nitrogen and phosphorus was between 37.50 and 1350 μg/ g, 12.17 and 90.00 μg/ g, 12.17 to 53.17 μg/ g and 0.05 to 0.62 μg/ g, respectively. The concentration of iron and lead was very high in T1S1 and in the lower horizon of profile T1S3. In general the soil of the PPTC site was very acidic and

  13. Bioactive amines in Brazilian wines: types, levels and correlation with physico-chemical parameters

    Directory of Open Access Journals (Sweden)

    Solange C. Souza

    2005-01-01

    Full Text Available The levels of ten bioactive amines and the physico-chemical characteristics of Cabernet Sauvignon, Cabernet Franc and Merlot wines from Bento Gonçalves, RS, Brazil, vintage of 1999 were investigated. The physico-chemical characteristics varied significantly: pH from 3.80 to 4.07, total acidity from 67.7 to 85.3 meq/L, alcohol content from 11.45 to 12.46 mL/100 mL and total SO2 from 9.6 to 102 mg/L. Six amines were detected in every sample - spermidine, putrescine, histamine, tyramine, serotonine and phenylethylamine. Total amine levels ranged from 2.03 to 7.60 mg/L. Putrescine was the prevalent amine, contributing with 20 to 66% of total levels. The amine profile and total levels were affected to a greater extent by vinification practices compared to grape type. There was significant correlation between some amines and also between amines and the physico-chemical parameters. Histamine levels were well below limits recommended by several countries.Os teores de aminas bioativas e as características físico-químicas de Cabernet Sauvignon, Cabernet Franc e Merlot da região de Bento Gonçalves, RS, safra de 1999, foram analisados. As características físico-químicas variaram significativamente: pH de 3,80 a 4,07; acidez total de 67,7 a 85,3 meq/L, teor alcoólico de 11,45 a 12,46 mL/100 mL e SO2 total de 9,6 a 102 mg/L. Seis aminas estavam presentes em todas as amostras - espermidina, putrescina, histamina, tiramina, serotonina e feniletilamina. Os teores totais de aminas variaram de 2,03 a 7,60 mg/L. Putrescina foi a amina predominante, contribuindo com 20 a 66% do total. O perfil de aminas foi mais afetado pela vinícola do que pelo tipo de uva. Houve correlação significativa entre aminas e também entre aminas e parâmetros físico-químicos. Os teores de histamina detectados são inferiores aos limites máximos estipulados para o vinho em outros países.

  14. Study of microbiological, physico-chemical and biochemical a fourth range salad irradiated for people immunosuppressed

    International Nuclear Information System (INIS)

    Ayadi, Nadia

    2013-01-01

    We are interested in this work to immunocompromised patients in the National Transplant Center Bone Marrow of Tunis, that's why a raw salad IV range was irradiated and chosen as auxiliary dish. Following a series of microbiological analysis carried out on samples treated with different doses : 0 (control) , 1, 2 , 3, 3.5 and 4 kGy. 4 kGy dose was the most suitable for this type of dish ensuring good bacterial quality below the limits prescribed by the International Atomic Energy Agency (IAEA) for 9 days of refrigerated storage. The physico-chemical and biochemical parameters showed no significant effect on the gamma radiation on nutrients such as proteins , trace elements and vitamin E. The raw salads IV range perfectly packaged and irradiated can be a good way to stimulate the immune system in immunocompromised patients and improve their health.

  15. Physico-chemical basis of radioprotection by melanin: a fungal pigment

    International Nuclear Information System (INIS)

    Barik, A.; Kunwar, A.; Singh, B.G.; Priyadarsini, K.I.; Raghukumar, S.

    2014-01-01

    Melanin is a biopolymer with wide spread biological activity like protection from UV-radiation damage, decrease of oxidative stress, binding to metals and drugs etc. Recently it has been observed that melanized fungal species grow in areas of high-radiation background in Chernobyl, and also in cooling pool water of nuclear reactors. Some of these organisms survived even after radiation exposure up to 6400 Gy. This prompted us to evaluate the radioprotecting ability of melanin. Although there are various types of melanin available, for the present radioprotection studies, melanin isolated from the culture filtrate of a fungus Gliocephalotrichum simplex was used. Chemically this particular type of melanin is the oligomeric form of dihydroxy indole and dihydroxy indole carboxylic acid and termed as eumelanin. Due to the presence of dihydroxy group in the benzene ring, they are in equilibrium with the partially oxidized (semiquinone radical form) and fully oxidized (quinone, non-radical) form. The radical nature of melanin was detected by electron paramagnetic resonance (EPR) spectrum and quantitative estimation of radical was made, in terms of spin density i. e. as 6.62 x 1017 spins/g. The protective activity of melanin was primarily due to inhibition of radiation-induced hematopoietic damages as evidenced by improvement in spleen parameters. To further understand the physico-chemical properties associated with radioprotection, reactions radiolytically generated free radicals with melanin was studied using pulse radiolysis

  16. Physico-chemical stability of eribulin mesylate containing concentrate and ready-to-administer solutions.

    Science.gov (United States)

    Spindeldreier, Kirsten; Thiesen, Judith; Lipp, Hans-Peter; Krämer, Irene

    2014-06-01

    The aim of this study was to determine the stability of commercially available eribulin mesylate containing injection solution as well as diluted ready-to-administer solutions stored under refrigeration or at room temperature. Stability was studied by a novel developed stability-indicating reversed-phase high-performance liquid chromatography (RP-HPLC) assay with ultraviolet detection (detection wavelength 200 nm). Triplicate test solutions of eribulin mesylate containing injection concentrate (0.5 mg/mL) and with 0.9% sodium chloride solution diluted ready-to-administer preparations (0.205 mg/mL eribulin mesylate in polypropylene (PP) syringes, 0.020 mg/mL eribulin mesylate in polypropylene/polyethylene (PE) bags) were stored protected from light either at room temperature (25) or under refrigeration (2-8). Samples were withdrawn on day 0 (initial), 1, 3, 5, 7, 14, 21 and 28 of storage and assayed. Physical stability was determined by measuring the pH value once a week and checking for visible precipitations or colour changes. The stability tests revealed that concentrations of eribulin mesylate remained unchanged over a period of 28 days irrespective of concentration, container material or storage temperature. Neither colour changes nor visible particles have been observed. The pH value varied slightly over time but remained in the stability favourable range of 5-9. Eribulin mesylate injection (0.5 mg/mL) is physico-chemically stable over a period of 28 days after first puncture of the vial. After dilution with 0.9% NaCl vehicle solution, ready-to-administer eribulin mesylate injection solutions (0.205 mg/mL in PP syringe) and infusion solutions (0.02 mg/mL in prefilled PP/PE bags) are physico-chemically stable for a period of at least four weeks either refrigerated or stored at room temperature. For microbiological reasons storage under refrigeration is recommended.

  17. Comparison of amino acids physico-chemical properties and usage of late embryogenesis abundant proteins, hydrophilins and WHy domain.

    Science.gov (United States)

    Jaspard, Emmanuel; Hunault, Gilles

    2014-01-01

    Late Embryogenesis Abundant proteins (LEAPs) comprise several diverse protein families and are mostly involved in stress tolerance. Most of LEAPs are intrinsically disordered and thus poorly functionally characterized. LEAPs have been classified and a large number of their physico-chemical properties have been statistically analyzed. LEAPs were previously proposed to be a subset of a very wide family of proteins called hydrophilins, while a domain called WHy (Water stress and Hypersensitive response) was found in LEAP class 8 (according to our previous classification). Since little is known about hydrophilins and WHy domain, the cross-analysis of their amino acids physico-chemical properties and amino acids usage together with those of LEAPs helps to describe some of their structural features and to make hypothesis about their function. Physico-chemical properties of hydrophilins and WHy domain strongly suggest their role in dehydration tolerance, probably by interacting with water and small polar molecules. The computational analysis reveals that LEAP class 8 and hydrophilins are distinct protein families and that not all LEAPs are a protein subset of hydrophilins family as proposed earlier. Hydrophilins seem related to LEAP class 2 (also called dehydrins) and to Heat Shock Proteins 12 (HSP12). Hydrophilins are likely unstructured proteins while WHy domain is structured. LEAP class 2, hydrophilins and WHy domain are thus proposed to share a common physiological role by interacting with water or other polar/charged small molecules, hence contributing to dehydration tolerance.

  18. Toward a Reasoned Classification of Diseases Using Physico-Chemical Based Phenotypes

    Directory of Open Access Journals (Sweden)

    Laurent Schwartz

    2018-02-01

    Full Text Available Background: Diseases and health conditions have been classified according to anatomical site, etiological, and clinical criteria. Physico-chemical mechanisms underlying the biology of diseases, such as the flow of energy through cells and tissues, have been often overlooked in classification systems.Objective: We propose a conceptual framework toward the development of an energy-oriented classification of diseases, based on the principles of physical chemistry.Methods: A review of literature on the physical chemistry of biological interactions in a number of diseases is traced from the point of view of the fluid and solid mechanics, electricity, and chemistry.Results: We found consistent evidence in literature of decreased and/or increased physical and chemical forces intertwined with biological processes of numerous diseases, which allowed the identification of mechanical, electric and chemical phenotypes of diseases.Discussion: Biological mechanisms of diseases need to be evaluated and integrated into more comprehensive theories that should account with principles of physics and chemistry. A hypothetical model is proposed relating the natural history of diseases to mechanical stress, electric field, and chemical equilibria (ATP changes. The present perspective toward an innovative disease classification may improve drug-repurposing strategies in the future.

  19. Toward a Reasoned Classification of Diseases Using Physico-Chemical Based Phenotypes

    Science.gov (United States)

    Schwartz, Laurent; Lafitte, Olivier; da Veiga Moreira, Jorgelindo

    2018-01-01

    Background: Diseases and health conditions have been classified according to anatomical site, etiological, and clinical criteria. Physico-chemical mechanisms underlying the biology of diseases, such as the flow of energy through cells and tissues, have been often overlooked in classification systems. Objective: We propose a conceptual framework toward the development of an energy-oriented classification of diseases, based on the principles of physical chemistry. Methods: A review of literature on the physical chemistry of biological interactions in a number of diseases is traced from the point of view of the fluid and solid mechanics, electricity, and chemistry. Results: We found consistent evidence in literature of decreased and/or increased physical and chemical forces intertwined with biological processes of numerous diseases, which allowed the identification of mechanical, electric and chemical phenotypes of diseases. Discussion: Biological mechanisms of diseases need to be evaluated and integrated into more comprehensive theories that should account with principles of physics and chemistry. A hypothetical model is proposed relating the natural history of diseases to mechanical stress, electric field, and chemical equilibria (ATP) changes. The present perspective toward an innovative disease classification may improve drug-repurposing strategies in the future. PMID:29541031

  20. The 18-th century glassware from Naliboki and Urzecze glasshouses. Physico-chemical studies

    International Nuclear Information System (INIS)

    Kunicki-Goldfinger, J.J.; Kierzek, J.; Kasprzak, A.J.; Malozewska-Bucko, B.

    1999-01-01

    The purpose of this work was to characterize some of the 18-th century glassware comming from the Naliboki and Urzecze glasshouses, basing on their chemical composition and selected physico-chemical properties. It was tried to find whether there exists a specific, characteristic for a given glasshouse, chemical composition and whether it is possible, basing on this composition, to identify the glass objects coming from particular, central European, 18-th century glasshouses. The studies were carried out at the National Museum Warsaw. Non-destructive procedures, i.e., without sample withdrawing and not affecting the glass surface procedures were used. Radioisotope excited X-ray fluorescence, a ultraviolet excited optical fluorescence examination and visual examination were employed. For evaluation of the measurement data a multivariate analysis was used. More than 200 colourless glass tableware items, mostly engraved, manufactured in the above mentioned glassworks and a much smaller number of objects originating from other 18-th century glasshouses of central Europe were examined. Two groups of glassware, with respect to the composition, have been distinguished. One of them is characterized by an increased content of lead. However, the lead content is not a sufficient property for the differentiation. Other elements play also an important role. This composition was identified in part of the items from the glasshouses of Naliboki, Dresden and Potsdam/Zechlin where the glasses from different glasshouses are distinguishable. The PbO content in some glasses from Saxony (SPb) can be as high as 9% (by weight). Among the glasswere items belonging to the second composition group, probably not-containing an intentional addition of lead, the glassware group from Lubaczow was identified. The results of the ultraviolet fluorescence examination enabled to differentiate 2 groups of glasswares; those showing a blue fluorescence and those not-showing (mostly a green fluorescence

  1. Determination of mixing characteristics of the river Kabul and the river Indus using physico-chemical and stable isotope parameters

    International Nuclear Information System (INIS)

    Qureshi, R.M.; Hussain, Q.M.; Sajjad, M.I.; Hussain, S.D.; Latif, Z.

    1990-11-01

    This report presents a comparative study on the usefulness of stable isotope parameters (hydrogen and oxygen) versus the physico-chemical parameters (electrical conductivity, temperature, pH value) of water to determine the extent of mixing of the river Kabul with the river Indus near Attock. In view of the sampling techniques employed in the present investigations, electrical conductivity and temperature are found to be the best field parameters for a quick estimate of mixing path length. However, the stable isotopes of the water molecule, due to their greater sensitivity and measuring accuracy, provide a better scenario of mixing characteristics as compared to the physico-chemical parameters. It appears that under normal flow condition, it takes about 5 km channel distance for complete mixing of the Kabul river water in the Indus river channel. A computer code MIXABC is developed to determine the percentage contribution of one river water along a mixing channel in the other river. Details of the source programs are presented. The code can be used on any IBM-compatible microsystem. (author)

  2. Physico Chemical Characteristics of Lakhna Devi Temple Water Tank, Lakhna, Bakewar, Etawah, U.P. with reference to Cyanobacterial Diversity

    Directory of Open Access Journals (Sweden)

    Omesh Bajpai

    2013-08-01

    Full Text Available Fresh water bodies in populated plains of tropical countries face various disturbances in the form of pollutant and nutrient inflow, heavy metal and elemental precipitation (wet or dry and constant silt inflow (natural or anthropogenic. The physico-chemical characteristics are very much important for any water body. In lentic water bodies these characteristics shows very much variation because in summer they have less and in rains large amount of water. These adverse constrain effectively influence the algal assemblage and can be a good indicator of overall health of the water body. In the study different Physico-chemical characteristics and algal diversity were monthly observed for one year duration (Jun. 2008 to May 2009. Some of 31 species of Cyanobacteria recorded from the study site viz. Microcystis aerughinosa, M. flos-aquae, M. robusta, Chroococcus minor, C.minutes, Gloeocapsa magma, Aphanocapsa littoralis, Aphanothece microscopis, Coelosphaerium kuetzingianum, Merismopedia glauca, M. tenuissima, Arthrospira spriulinoides, Spirulina gigantean, S. major, Oscillatoria formosa, O. subuliformis, O. princeps, Phormidium ambiguum, P. fragile, P. lucidum, Lyngbya contorta, O. epiphytica, O.majuscule, Cylindrospermum minutissimum, Nostoc commune, N. punctiforme, Anabaena oscillarioides, A. oryzae, Calothrix gloeocola, Rivularia aquatic and Gloeotrichia pisum.

  3. Physico-chemical characterisation of Slovak wines

    Directory of Open Access Journals (Sweden)

    Barbora Lapčíková

    2017-01-01

    Full Text Available The aim of the present study was characterisation of selected varieties of still wines produced in Slovak Republic in vintage year 2013 and one 2012. There were tested ten samples of nine varieties of wines originated from Malokarpatská "Lesser Carpathian" and Južnoslovenská "Southern Slovakia" wine regions of Slovak Republic, Dornfelder, Frankovka modrá, Svätovarinecké, Zweigeltrebe, Müller Thurgau, Veltlínské zelené, Rizling rýnsky, Rizling vlašský and Sauvignon wines. There were studied selected physico-chemical properties of tested wines as a total contents of anthocyanins and polyphenols by means of spectrophotometry, titratable acidity, density and chromatic characteristics. The highest content of anthocyanins (TAC was found in red wine Frankovka modrá, 183 mg.L-1 and the lowest for sample rose wine St. Laurent 19 mg.L-1. The content of total phenolic compounds as a gallic acid was in range 2833 to 1961 mg.L-1 for red wines, 1016 and 1013 mg.L-1 for rose wines, 1085 to 549 mg.L-1for white wines.  Total acidy was average 6.3 ±0.3 g.L-1 only for Ryzling rýnský, 8.2 g.L-1 and Sauvignon rose 8.0 g.L-1 and was expressed as the amount of tartaric acid. Quality of wines can be expressed by colour intensity too. Was evaluated and compared intensity of colour in wines by CIE Lab method and the total differences between red, rose and white wine DE* was calculated. The most differences was found for Svätovarinecké a Frankovka modrá (2.5 - red wines ("clearly perceptible" and 4.9 for Veltlýnské zelené and Müller Thurgau - white wine ("moderating effect".

  4. Fossilization History of Fossil Resin from Jambi Province (Sumatra, Indonesia Based on Physico-Chemical Studies

    Directory of Open Access Journals (Sweden)

    Beata Naglik

    2018-03-01

    Full Text Available A unique specimen of fossil resin originating from the Dipterocarpaceae tree family found in Miocene brown coal deposits in Jambi Province (Sumatra, Indonesia was investigated via microscopic observations, microhardness testing and infrared and Raman spectroscopic methods. Its form is rare in nature, being an aggregate of three varieties of resin differing in colour, transparency and internal structure. This suggests the formation of the resins at different stages. Further alteration processes, including fossilization and maturation of the resin in a swamp environment resulted in stepwise aromatization of the cyclohexane ring in steroids and cross-linking through formation of ester bonds as well as carbon–carbon bonds between steroid molecules. The various environmental and geological conditions affecting the formation processes of the resins were recorded in their physico-chemical properties. Additionally, heating conditions accelerated by volcanism were proposed as a factor determining the maturation grade of the resin.

  5. Textural and physico-chemical characteristics of white brined goat cheeses made from frozen milk and curd. The use of square I - distance statistics

    Directory of Open Access Journals (Sweden)

    Nemanja Kljajevic

    2017-01-01

    Full Text Available Objective of this study was to investigate the effect of short term frozen storage of milk and curd on textural properties and physico-chemical composition of white brined goat cheese. Raw milk and curds (at various stages of pressing were frozen and kept for seven days at -27 °C. Following the freezing, all the experimental cheeses were manufactured by the standard procedure, the same that was used for the control cheese sample which did not undergo freezing at any stage of production. The Square I - distance was used in order to rank the cheeses according to their similarity to the control cheese in terms of texture attributes and physico-chemical characteristics. The results show that, in terms of all examined variables, the cheese made from frozen milk is the most similar to the control cheese.

  6. The ionising radiation effect on physico-chemical properties of organosilicon oils

    International Nuclear Information System (INIS)

    Krasnopyorova, A.P.

    1998-01-01

    The physico-chemical characteristics of organosilicon oils, as dielectric constant, viscosity, and refractive index, have been measured before and after the gamma irradiation with the doses of 10 3 to 10 6 Gray. The organosilicons studied were PMS-1, PMS-5, PMS-VV, and PMFS. All the measurements were performed with 60 Co in open test tubes as a source of gamma radiation. The structure modifications in oil molecules depending on irradiation dose have been studied with IR spectrometry. When comparing the main characteristics of the studied organosilicons before and after the irradiation one may arrange them into the following sequence with the increasing of their resistance to the gamma radiation: PMS-VV 6 GRay. For the liquids PMS-1 and PMS-VV it is found that the increasing of their viscosity with the dose absorbed obeys exponential law: ν ν 0 exp (K γ .D), where ν 0 and ν are the viscosities of the sample before and after the irradiation, respectively; D is the absorbed radiation dose; K γ is the radiation damage factor. (author)

  7. Physico-chemical screening of accessions of Jatropha curcas for biodiesel production

    International Nuclear Information System (INIS)

    Naresh, B.; Reddy, M. Srikanth; Vijayalakshmi, P.; Reddy, Veena; Devi, Prathibha

    2012-01-01

    Biodiesel is an alternative environmentally friendly fuel made from renewable biological sources such as vegetable oils and animal fats. The present report deals with screening of 14 accessions of Jatropha curcas collected from all over India to find the most suitable ones for production of Biodiesel. From the 14 accessions of J. curcas located in the plantation at Osmania University, 4 accessions were initially selected on the basis of traits like general appearance, pest resistance, seed yield and seed-oil content. Further, the seed-oil of these 4 accessions was characterized by physico-chemical analysis to identify the elite accessions for production of biodiesel. Highest 1000-seed weight (640 g) and highest percentage seed-oil content (50.16) (extracted by Soxhlet method with hexane as the solvent) was recorded in the “KM” accession. The transesterification process is affected by the presence of high free fatty acids (recorded in “MB” accession) and high moisture content (recorded in “KM” accession) of the seed-oil which also interfere with the separation of fatty esters and glycerol during production of Biodiesel. Further, high phosphorus content and iodine number (recorded in “MB” accession) interfere with conversion of seed-oil to Biodiesel. In the above context, in spite of its yield being lower, the seed-oil of the “RSAD” accession was found to be most suitable for Biodiesel production followed by “KM”, “F.W.B” and “MB” accessions, since it contains lower free fatty acids, acid value, viscosity, diglycerides and iodine number. -- Highlights: ► We analyzed Indian Jatropha accessions for yield and quality. ► Elite accessions were selected for physico-chemical analysis of seed-oil. ► Four elite accessions identified as good candidates for Biodiesel production. ► The “RSAD” accession was found to be the best suited for biodiesel.

  8. Seasonal variation in the physico-chemical properties of Rushikulya estuary and its effect on the occurrence of Chanos fry

    OpenAIRE

    Patnaik, K.C.; Misra, P.M.

    1990-01-01

    Seasonal variation in some physico-chemical properties of Rushikulya estuary was studied. The surface water temperature varied from 20 to 34.5 degree C, the transparency of the water from 6.3 to 12 cm, the salinity from 28.3 to 32.8 % and the pH from 6.77 to 7.35. The transparency and salinity showed bimodal distribution. Occurrence of the Chanos fry were correlated to it.

  9. Visualization of physico-chemical properties and microbial distribution in soil and root microenvironments

    Science.gov (United States)

    Eickhorst, Thilo; Schmidt, Hannes

    2016-04-01

    Plant root development is influenced by soil properties and environmental factors. In turn plant roots can also change the physico-chemical conditions in soil resulting in gradients between roots and the root-free bulk soil. By releasing a variety of substances roots facilitate microbial activities in their direct vicinity, the rhizosphere. The related microorganisms are relevant for various ecosystem functions in the root-soil interface such as nutrient cycling. It is therefore important to study the impact and dynamics of microorganisms associated to different compartments in root-soil interfaces on a biologically meaningful micro-scale. The analysis of microorganisms in their habitats requires microscopic observations of the respective microenvironment. This can be obtained by preserving the complex soil structure including the root system by resin impregnation resulting in high quality thin sections. The observation of such sections via fluorescence microscopy, SEM-EDS, and Nano-SIMS will be highlighted in this presentation. In addition, we will discuss the combination of this methodological approach with other imaging techniques such as planar optodes or non-invasive 3D X-ray CT to reveal the entire spatial structure and arrangement of soil particles and roots. When combining the preservation of soil structure via resin impregnation with 16S rRNA targeted fluorescence in situ hybridization (FISH) single microbial cells can be visualized, localized, and quantified in the undisturbed soil matrix including the root-soil interfaces. The simultaneous use of multiple oligonucleotide probes thereby provides information on the spatial distribution of microorganisms belonging to different phylogenetic groups. Results will be shown for paddy soils, where management induced physico-chemical dynamics (flooding and drying) as well as resulting microbial dynamics were visualized via correlative microscopy in resin impregnated samples.

  10. Evaluation of physico-chemical properties of Portland cements and MTA

    Directory of Open Access Journals (Sweden)

    Jorge Luis Gonçalves

    2010-09-01

    Full Text Available The purpose of this study was to evaluate the hydrogenionic potential and electrical conductivity of Portland cements and MTA, as well as the amount of arsenic and calcium released from these materials. In Teflon molds, samples of each material were agitated and added to plastic flasks containing distilled water for 3, 24, 72 and 168 h. The results were analyzed with a Kruskal-Wallis non-parametric test for global comparisons and a Dunn-Tukey test for pairwise comparisons. The results revealed no significant differences in the pH of the materials (p > 0.05. The electrical conductivity of the cements were not statistically different (p > 0.05. White non-structural cement and MTA BIO released the largest amount of calcium ions into solution (p 0.05. The results indicated that the physico-chemical properties of Portland cements and MTA were similar. Furthermore, all materials produced an alkaline environment and can be considered safe for clinical use because arsenic was not released. The electrical conductivity and the amount of calcium ions released into solution increased over time.

  11. Evaluation of physico-chemical properties of Portland cements and MTA.

    Science.gov (United States)

    Gonçalves, Jorge Luis; Viapiana, Raqueli; Miranda, Carlos Eduardo Saraiva; Borges, Alvaro Henrique; Cruz Filho, Antônio Miranda da

    2010-01-01

    The purpose of this study was to evaluate the hydrogenionic potential and electrical conductivity of Portland cements and MTA, as well as the amount of arsenic and calcium released from these materials. In Teflon molds, samples of each material were agitated and added to plastic flasks containing distilled water for 3, 24, 72 and 168 h. The results were analyzed with a Kruskal-Wallis non-parametric test for global comparisons and a Dunn-Tukey test for pairwise comparisons. The results revealed no significant differences in the pH of the materials (p > 0.05). The electrical conductivity of the cements were not statistically different (p > 0.05). White non-structural cement and MTA BIO released the largest amount of calcium ions into solution (p 0.05). The results indicated that the physico-chemical properties of Portland cements and MTA were similar. Furthermore, all materials produced an alkaline environment and can be considered safe for clinical use because arsenic was not released. The electrical conductivity and the amount of calcium ions released into solution increased over time.

  12. X-ray physico-chemical imaging during activation of cobalt-based Fischer-Tropsch synthesis catalysts

    Science.gov (United States)

    Beale, Andrew M.; Jacques, Simon D. M.; Di Michiel, Marco; Mosselmans, J. Frederick W.; Price, Stephen W. T.; Senecal, Pierre; Vamvakeros, Antonios; Paterson, James

    2017-11-01

    The imaging of catalysts and other functional materials under reaction conditions has advanced significantly in recent years. The combination of the computed tomography (CT) approach with methods such as X-ray diffraction (XRD), X-ray fluorescence (XRF) and X-ray absorption near-edge spectroscopy (XANES) now enables local chemical and physical state information to be extracted from within the interiors of intact materials which are, by accident or design, inhomogeneous. In this work, we follow the phase evolution during the initial reduction step(s) to form Co metal, for Co-containing particles employed as Fischer-Tropsch synthesis (FTS) catalysts; firstly, working at small length scales (approx. micrometre spatial resolution), a combination of sample size and density allows for transmission of comparatively low energy signals enabling the recording of `multimodal' tomography, i.e. simultaneous XRF-CT, XANES-CT and XRD-CT. Subsequently, we show high-energy XRD-CT can be employed to reveal extent of reduction and uniformity of crystallite size on millimetre-sized TiO2 trilobes. In both studies, the CoO phase is seen to persist or else evolve under particular operating conditions and we speculate as to why this is observed. This article is part of a discussion meeting issue 'Providing sustainable catalytic solutions for a rapidly changing world'.

  13. Tetrapyrrole-photosensitizers vectorization and plasma LDL: a physico-chemical approach.

    Science.gov (United States)

    Bonneau, Stéphanie; Vever-Bizet, Christine; Mojzisova, Halina; Brault, Daniel

    2007-11-01

    A photosensitizer is defined as a chemical entity able to induce, under light-irradiation effect, a chemical or physical alteration of another chemical entity. Thanks to their preferential retention in proliferating tissues, some photosensitizers are therapeutically used such as in photodynamic therapy (PDT). Besides, this method has already been approved for several indications. The selectivity of photosenzitizers for cells in proliferation involves both their association with low density lipoproteins (LDLs) and their ability to cross membranes under various pH conditions. The photosensitizers used are in most cases based on the porphyrin structure, but other compounds, of which far-red-light absorption properties are most compatible with biological tissues irradiation, have been developed, such as phthalocyanines. This paper presents physico-chemical studies of the interaction of a disulfonated aluminium phthalocyanine (AlPcS2) with human LDLs. The data obtained are compared with the parameters of the interaction of these lipoproteins with deuteroporphyrin (DP) and chlorin e6 (Ce6). A close attention is paid to the dynamic aspects of these phenomena. The data obtained on these simple systems then allowed us to interpret the sub-cellular localization of the photosensitizers on a human line of fibroblasts, and to evaluate the influence of LDLs on the intracellular distribution of the compounds. This last point is of major importance because the localization of such photosensitizers (in particular AlPcS2) in endocytic vesicles and their subsequent ability to induce a release of the contents of these vesicles - including externally added macromolecules - into the cytosol is the basis for a recent method for macromolecule activation, named photochemical internalization (PCI). PCI has been shown to potentiate the biological activity of a large variety of macromolecules. The comprehension of the mechanisms governing this particular sub-cellular localization could allow

  14. SYNTHESIS AND PHYSICO-CHEMICAL STUDIES OF HETEROMETALLIC NITRILOTRIACETATES OF CHROMIUM(III WITH SOME 3d METALS

    Directory of Open Access Journals (Sweden)

    Victor Ciorne

    2006-06-01

    Full Text Available Heterometallic complexes of chromium (III with some 3d metals have been synthesized based on nitrilotriacetic acid (H3nta, like M(bpy2Cr2(OH2(nta2·nH2O, where M = Mn2+, Co2+, Ni2+ and Zn2+; bpy = α,α′- bipyridine; n = 8 or 9. Their chemical composition has been determined from the results of the elemental analysis and thermogravimetric study. The coordination modes of the nta3 ̄ ligand and the type of chemical bonds have been proposed basing on IR spectra.

  15. Bi-doped PbO2 anodes: Electrodeposition and physico-chemical properties

    International Nuclear Information System (INIS)

    Shmychkova, O.; Luk’yanenko, T.; Velichenko, A.; Meda, L.; Amadelli, R.

    2013-01-01

    The influence of bismuth ions on kinetics of lead dioxide electrodeposition from methanesulfonate electrolytes and physico-chemical properties of obtained coatings were studied. Experimental results are consistent with a mechanism previously proposed in the literature for lead dioxide electrodeposition. The presence of bismuth ions in the electrodeposition solution causes a decrease of rate constants of lead dioxide formation due to co-adsorption phenomena. Deposits from solutions containing bismuth ions appear shiny dark grey, and show good adhesion to metal support. SEM images reveal a compact structure with spindle-shaped submicron and nanosized crystals and X-ray diffractograms demonstrated that incorporation of bismuth diminishes the size of crystal particles. Oxygen evolution was investigated to test electrocatalytic activity. It is shown, that oxygen overpotential on modified electrodes is significantly higher than on non-modified PbO 2 -electrode, which depends on bismuth content in deposit and segregation of bismuth that induces surface heterogeneity due to sites with different electroactivity for water oxidation

  16. Physico-chemical traits of raw and cooked fillets of rainbow trout (Oncorhynchus mykiss from different strains and farms

    Directory of Open Access Journals (Sweden)

    Roberta Martelli

    2014-09-01

    Full Text Available Fillets and cooking yields, water holding capacity, textural properties, colour, proximate composition, collagen and fatty acids of five strains (IT1, IT2, IT3, USA, UK of rainbow trout, Oncorhynchus mykiss, reared in three farms (F1, F2, F3, were measured before and after cooking. Physico-chemical parameters of the strains greatly differed both in raw and cooked state. IT2 and USA recorded the highest yields. IT2 distinguished from the other strains, showing lowest values of hardness, chewiness, gumminess and springiness. It also had brighter and less pigmented flesh with low fat, mainly in the raw state. USA strain showed the most valuable traits in terms of texture and colour, and had higher fat and collagen content in flesh. The physico-chemical profile of each strain was differently modified by cooking. USA strain maintained a positive texture and colour profile after cooking and its quality was the best.

  17. Changes in physico-chemical properties of soil by adding organic amendments in a tomato crop

    International Nuclear Information System (INIS)

    Sanchez Navarro, A.; Marin Salneandro, P.; Delgado Iniesta, M. J.

    2009-01-01

    This study possible changes in the physico-chemical properties of soil under intensive cultivation of tomatoes after the addition of two different types of organic amendments: a natural as sheep manure and synthetic made. Trial plots that were designed are located in the NE of the province of Granada, in Puebla de Trial plots that were designed are located in the NE of the province of Granada, in Puebla de Don Fadrique, in the are that in recent years, change are very important in agriculture, from traditional farms extensive cultivation of rain-fed cereal crops such as intensive vegetale broccoli or tomatoes. (Author) 16 refs.

  18. Physico-chemical behavior of radionuclides in seawater

    International Nuclear Information System (INIS)

    Kimura, Yuichiro; Ogawa, Yoshihiro; Honda, Yoshihide; Katsurayama, Kosuke.

    1980-01-01

    To elucidate the physico-chemical states of radionuclides in seawater in relation to uptake by the marine biosphere, the physicochemical behavior of radiocobalt, radioruthenium and radiocerium in seawater was investigated by electrodialysis, high-voltage paper electrophoresis, and also by paper chromatography for nitrosylruthenium complexes. Most of the radiocobalt in seawater behaved as dialytic cations. However, these cationic species were not necessarily simple divalent, because their electrophoretic bands were rather diffuse and showed two peaks temporarily. The electroneutral form also increased with aging in seawater. The radioruthenium in seawater showed relatively a number of well-defined species which could be readily classified into anionic, cationic, electroneutral, colloidal or particulate, non-dialytic and more or less adsorbable species. The radioruthenium in the chloro and nitratonitrosylruthenium complexes occurred mainly electroneutral and anionic species, while nitro and binuclear oxygen-bridged nitratonitrosylruthenium complexes showed dominant anionic species. The hydrolysis of higher nitro and nitratonitrosylruthenium complexes to lower ones was demonstrated with aging in seawater by paper chromatography. The radiocerium in seawater showed initially cationic species. However, the electroneutral and anionic species were revealed with aging by electrodialysis. The radiocerium were strongly adsorbed on filter paper at the starting band in paper electrophoresis, presumably because of the formation of strongly adsorbable or insoluble hydrolytic species or particle formation. (author)

  19. Researches on Physico-Chemical and Microbiological Characteristics of Sheep and Cow Milk from Cristian Farm, Romania

    Directory of Open Access Journals (Sweden)

    Popa Ionuţ Radu

    2014-06-01

    Full Text Available This study was conducted over a period of three month in the Cristian farm, Sibiu. For the physical, chemical and microbiological analyzes were taken a number of 15 samples per month. From physico-chemical point of view the content evolution of fat, not fat solid substance, density, protein, freezing point, temperature, lactose, conductivity, pH, water addition was followed. Samples were analyzed using the milk analyzer Ekomilk Total of the Research Centre in Biotechnology and Microbiology of the "Lucian Blaga" University. The microbiological contamination of milk was done by determining the total number of bacteria and coliform bacteria. From microbiological point of view it was observed that these conditions are largely met, but a more rigorous control on the cleanliness of utensils and of the staff is required.

  20. Gamma radiation effects on physico-chemical parameters of apple fruit during commercial post-harvest preservation

    International Nuclear Information System (INIS)

    Mostafavi, Hossein Ahari; Mirmajlessi, Seyed Mahyar; Mirjalili, Seyed Mohammad; Fathollahi, Hadi; Askari, Hadi

    2012-01-01

    The physico-chemical parameters (including moisture, total soluble solids, antioxidant activity, phenolic content and firmness) of cv. Red Delicious apple subjected to γ radiation were evaluated for their ability to avoid the post-harvest blue mold caused by Penicillium expansum during cold storage. Freshly harvested apples were inoculated with P. expansum. Treated fruits were irradiated at doses of 0, 300, 600, 900 and 1200 Gy and stored at 1 °C. Apples were evaluated at three month intervals. The results showed that there was a clear link between phenolic content and antioxidant activity, so that dose range of 900 Gy and higher significantly decreased phenolic content and antioxidant activity. The moisture percent of stored apples was more responsive to irradiation (at doses of 900–1200 Gy) than storage time and pathogen. Lesion diameter of pathogen-treated non-irradiated apples was significantly increased after three months. This means that storage at low temperature is not enough to avoid blue mold growth. As dose and storage time increased firmness decreased; also pathogen accelerated softening of stored apples. This study showed conclusively that low irradiation doses (300 and 600 Gy) combined with cold storage is a way to minimize apple quality losses during nine month storage period. - Highlights: ► A suitable method to reduce apple quality losses during nine month storage period. ► Effects of γ radiation and cold storage on physico-chemical parameters of the apple. ► Potential dual benefit of low irradiation dose combined with cold storage. ► Radiation dose determination for Penicillium expansum control.

  1. Evaluation of physico-chemical and antioxidant properties in different varieties of banana (musa acuminata), indigenous to pakistan

    International Nuclear Information System (INIS)

    Azizuddin, A.; Ghafoor, S.; Mahmood, T.

    2014-01-01

    The antioxidant capacity, phenolic and flavonoid contents, and physico-chemical analysis on the pulp of three different varieties of Musa acuminata, were studied namely Cavendish basrai, Grand naine and Plantain, collected from Gharo, Adam Khas Kheli Road near Karachi (Pakistan). DPPH (2,2-diphenyl-1-picrylhydrazyl) radical scavenging, reducing power (RPA) and phosphomolybdenum assays were used for determination of their antioxidant capacity. Cavendish basrai characterized the highest antioxidant capacity among three varieties, DPPH (82.46 % inhibition at 0.1 mM conc.), RPA (43.59 mg/100 g) and phosphomolybdenum (38.90 mg/100 g) in methanolic extract and DPPH (67.27 % inhibition at 0.1 mM conc.), RPA (27.03 mg/100 g) and phosphomolybdenum (24.27 mg/100 g) in water extract. The phenolic (83.04 mg/100 g, 19.50 mg/100 g) and flavonoid contents (11.66 mg/100 g, 4.77 mg/100 g) were also high in Cavendish basrai in methanolic and water extracts, respectively showed the direct relation of antioxidant capacity to the phenolic and flavonoid contents, and the DPPH assay revealed more power full assay for determination of antioxidant capacity among these assays. In correlation with antioxidant capacity, Plantain showed comparatively high physico-chemical characteristics revealed high nutritional contents such as total dry matter, total sugar contents, TSS, titratable acidity and % NaCl. (author)

  2. Comparison of different image analysis algorithms on MRI to predict physico-chemical and sensory attributes of loin

    DEFF Research Database (Denmark)

    Caballero, Daniel; Caro, Andrés; Dahl, Anders Bjorholm

    2018-01-01

    -chemical and sensory analysis. CFA reached low relationship for the quality parameters of loins, the remaining algorithms achieved correlation coefficients higher than 0.5 noting OPFTA that reached the highest correlation coefficients in all cases except for the L* coordinate color that GLCM obtained the highest...... correlation coefficient. These high correlation coefficients confirm the new algorithm as an alternative to the other computer vision approaches in order to compute the physico chemical and sensory parameters of meat products in a non-destructive and efficient way....

  3. Physico-chemical and chemical properties of some coconut coir dusts for use as a peat substitute for containerised ornamental plants.

    Science.gov (United States)

    Abad, Manuel; Noguera, Patricia; Puchades, Rosa; Maquieira, Angel; Noguera, Vicente

    2002-05-01

    Selected physico-chemical and chemical characteristics of 13 coconut coir dust (mesocarp pithy tissue plus short-length fibres) samples from Asia, America and Africa were evaluated as peat alternatives. All properties studied differed significantly between and within sources, and from the control Sphagnum peat. pH of coir dust was slightly acidic, whereas salinity varied dramatically between 39 and 597 mS m(-1) in the saturated media extract. The cation exchange capacity and carbon/nitrogen (C/N) ratio ranged from 31.7 to 95.4 cmol(c) kg(-1) and from 75 to 186, respectively. Most carbon was found as lignin and cellulose. The concentrations of available nitrogen, calcium, magnesium and micro-elements were low, while those of phosphorus and potassium were remarkably high (0.28-2.81 mol m(-3) and 2.97-52.66 mol m(-3) for P and K, respectively). Saline ion concentrations, especially chloride and sodium, were also high.

  4. Radiation chemical synthesis

    International Nuclear Information System (INIS)

    Zagoretz, P.A.; Poluetkov, V.A.; Shostenko, A.G.

    1986-01-01

    The authors consider processes in radiation chemical synthesis which are being developed in various scientific-research organizations. The important advantages of radiation chlorination, viz. the lower temperature compared with the thermal method and the absence of dehydrochlorination products are discussed. The authors examine the liquid-phase chlorination of trifluorochloroethyltrichloromethyl ether to obtain the pentachloro-contining ether, trifluorodichloroethyltrichloromethyl ether. The authors discuss radiation synthesis processes that have be used formulated kinetic equations on which models have been based. It is concluded that the possibilities of preparative (micro- and low-tonnage) radiation synthesis are promising

  5. Physico-chemical Stability of MabThera Drug-product Solution for Subcutaneous Injection under in-use Conditions with Different Administration Materials.

    Science.gov (United States)

    Mueller, Claudia; Dietel, Elke; Heynen, Severin R; Nalenz, Heiko; Goldbach, Pierre; Mahler, Hanns-Christian; Schmidt, Johannes; Grauschopf, Ulla; Schoenhamnmer, Karin

    2015-01-01

    MabThera is an essential component of the standard-of-care regimens in the treatment of non-Hodgkin lymphoma and Chronic Lymphatic Leukemia. MabThera for subcutaneous injection is a novel line extension that has been approved by the European Medicines Agency for the treatment of patients with follicular lymphoma and diffuse large B-cell lymphoma. This study aimed to evaluate in-use stability data of MabThera subcutaneous drug-product solution in single-use syringes for subcutaneous administration according to the European Medicines Agency guideline. The drug-product solution was exposed to material contact surfaces of five different administration setups commonly used in subcutaneous drug delivery. MabThera subcutaneous was transferred under aseptic conditions into polypropylene and polycarbonate syringes and stored for 1, 2, and 4 weeks at 2°C to 8°C followed by 24 hours at 30°C. After storage, subcutaneous administration was simulated and MabThera subcutaneous drug-product solution quality attributes were evaluated by using compendial physico-chemical tests, as well as suitable and validated molecule- and formulation-specific analytical methods. MabThera subcutaneous vials were treated and analyzed in parallel. The physico-chemical results of MabThera subcutaneous in the different setups were comparable to the control for all timepoints. No change in drug-product quality after storage and simulated administration was found compared to the control. However, since single-dose products do not contain preservatives, microbial contamination and growth needs to be avoided and product sterility needs to be ensured. The results showed that MabThera subcutaneous remains compatible and stable, from a physico-chemical perspective, for up to 4 weeks at 2°C to 8°C followed by 24 hours at 30°C with the contact materials tested in this study. In order to avoid and minimize microbial growth, MabThera subcutaneous should be used immediately after removal from the original

  6. The physico-chemical radioiodine species in the exhaust air of a pressurized water reactor (PWR2)

    International Nuclear Information System (INIS)

    Deuber, H.

    1981-12-01

    In a German pressurized water reactor, the physico-chemical 131 I species were determined in the plant exhaust and in the individual exhausts during 6 months. These measurements aimed in particular at determining the percentage and the source of the radiologically decisive elemental 131 I released to the environment. The retention of the 131 I species by iodine filters was also investigated. 20 to 30% of the 131 I discharged with the plant exhaust consisted of elemental iodine. This was largely released with the unfiltered exhaust from the chemical laboratory hoods and from the annular compartment. (orig.) [de

  7. Metal and physico-chemical variations at a hydroelectric reservoir analyzed by Multivariate Analyses and Artificial Neural Networks: environmental management and policy/decision-making tools.

    Science.gov (United States)

    Cavalcante, Y L; Hauser-Davis, R A; Saraiva, A C F; Brandão, I L S; Oliveira, T F; Silveira, A M

    2013-01-01

    This paper compared and evaluated seasonal variations in physico-chemical parameters and metals at a hydroelectric power station reservoir by applying Multivariate Analyses and Artificial Neural Networks (ANN) statistical techniques. A Factor Analysis was used to reduce the number of variables: the first factor was composed of elements Ca, K, Mg and Na, and the second by Chemical Oxygen Demand. The ANN showed 100% correct classifications in training and validation samples. Physico-chemical analyses showed that water pH values were not statistically different between the dry and rainy seasons, while temperature, conductivity, alkalinity, ammonia and DO were higher in the dry period. TSS, hardness and COD, on the other hand, were higher during the rainy season. The statistical analyses showed that Ca, K, Mg and Na are directly connected to the Chemical Oxygen Demand, which indicates a possibility of their input into the reservoir system by domestic sewage and agricultural run-offs. These statistical applications, thus, are also relevant in cases of environmental management and policy decision-making processes, to identify which factors should be further studied and/or modified to recover degraded or contaminated water bodies. Copyright © 2012 Elsevier B.V. All rights reserved.

  8. COMPARISON OF PHYSICO-CHEMICAL AND SENSORY QUALITY OF SAUSAGES PREPARED FROM SPENT DUCK AND HEN MEAT

    Directory of Open Access Journals (Sweden)

    Rajesh Kumar

    2016-06-01

    Full Text Available A study was conducted to assess the comparative quality of sausages prepared from different combination of spent duck and spent hen meats in terms of physico-chemical and sensory attributes. Sausages from 75% spent duck and 25% spent hen (T1 , 50% spent duck and 50% spent hen (T2 and 25% spent duck and 75% spent hen (T3 meats were prepared by standard methods. The quality parameter studies included pH, thiobarbituric acid (TBA, tyrosine value (TV, moisture (%, protein (%, fat (% and sensory attributes. Results revealed that pH, TV, and protein showed insignificant differences between the treatments whereas TBA, moisture and fat varied significantly (p T2 > T1.

  9. The Effect of Gamma Irradiation on Physico-Chemical Properties of Sodium Alginate

    International Nuclear Information System (INIS)

    Erizal; Sudrajat, A.; Dewi SP; Rahayu Chosdu; Tatiek Martati

    2004-01-01

    In the order to develop application of radiation to improve the quality of natural polymers, irradiation effects on physico-chemical characterization of Na-alginate has been carried out. Both Na-alginate powder and solution were irradiated by gamma rays at doses of 0;10;30; and 50 kGy. The parameters observed consisting of viscosity, pH, tensile strength, IR and UV spectra of irradiated and unirradiated samples. The results showed that irradiation up to 50 kGy, did not give effect on pH and no new peak appeared in the IR spectra. However, tensile strength and viscosity decreased with increasing irradiation dose up 50 kGy, which showed the possibility of degradation process on Na-alginate. (author)

  10. Waterborne parasites and physico-chemical assessment of selected lakes in Malaysia.

    Science.gov (United States)

    Onichandran, Subashini; Kumar, Thulasi; Lim, Yvonne A L; Sawangjaroen, Nongyao; Andiappan, Hemah; Salibay, Cristina C; Chye, Tan Tian; Ithoi, Init; Dungca, Julieta Z; Sulaiman, Wan Y W; Ling, Lau Yee; Nissapatorn, Veeranoot

    2013-12-01

    The objective of this study was to assess the physico-chemical parameters and waterborne parasites in selected recreational lakes from Malaysia. Samples were collected from seven stations of Recreational Lake A (RL-A) and six stations of Recreational Lake B (RL-B). The samples were processed to detect the presence of Giardia spp. and Cryptosporidium spp. using immunomagnetic separation kit, helminth eggs or ova by bright field microscopy and Acanthamoeba spp. by cultivation in non-nutrient agar. Chemical parameters such as ammonia, chlorine, fluoride, nitrate and nitrite and physical parameters such as dissolved oxygen, electrical conductivity, pH, salinity, temperature and total dissolved solid were also measured. Both lakes were freshwater with salinity ranging from 0.05 to 0.09 ppt. Most stations of these lakes were contaminated with Cryptosporidium spp., Giardia spp., Ascaris spp. and hookworm. Schistosoma spp. was found in RL-B only, while Acanthamoeba spp. was found in all stations. Of all sampling sites, station 5 of RL-B is the most contaminated. Linear regression and correlation analysis revealed that Giardia spp. and Schistosoma spp. showed a significant negative correlation with turbidity (p Malaysia. Future work on heavy metals (chromium, copper, mercury and zinc) is recommended to enhance the overall water quality monitoring and to take appropriate safety measures to ensure maintenance of good water standards.

  11. Physico-chemical trends in the sediments of Agbede Wetlands, Nigeria

    Science.gov (United States)

    Dirisu, Abdul-Rahman; Olomukoro, John Ovie; Ezenwa, Ifeanyi Maxwell

    2017-07-01

    This study assessed the physico-chemical status of sediments in the Agbede Wetlands with the aim to create a reference archive for the Edo North catchment and to further identify the characteristics mostly influenced by the natural and anthropogenic activities going on at the watershed. Nutrients, zinc, nickel and lead were identified to be mostly of anthropogenic origin, while alkali metals and alkaline earth metals were from both anthropogenic and natural sources. The clustering of stations 1 and 4 indicates that the sediment quality in the lentic systems was not completely excluded from the lotic system, suggesting that principal component analysis (PCA) and cluster analysis (CA) techniques are invaluable tools for identifying factors influencing the sediment quality. The mean values of the particle size distribution were in the following order across the ecosystems: sand (61.86-80.53%) > silt (9.75-30.34%) > clay (7.83-13.89%). The contamination of the water bodies was primarily derived from agricultural run-offs and through geochemical weathering of the top soils. Therefore, our analysis indicates that the concentrations of cations, anions and nutrients in the sediments of the lotic and lentic ecosystems in Agbede Wetlands are not at an alarming level.

  12. Physico-chemical study of coating plasma duplex alumina/hydroxyapatite for medical applications relation elaboration/structure/properties(dissolution/adherence/residual constraints); Etude physico-chimique de depots plasma duplex alumine/hydroxyapatite pour applications medicales relations elaboration/structure/proprietes (dissolution/adherence/contraintes residuelles)

    Energy Technology Data Exchange (ETDEWEB)

    Demonet, N

    1998-11-19

    The physico-chemical behavior of porous ceramics depositing is studied in order to use them to favour the biological fixing of hip prosthesis fixed without cement. Alumina depositing, hydroxyapatite depositing and duplex (the both together) have been realized by plasma projection on a substrate in Ti-6Al-V. Tests of dissolution have been made. An original method of sound followed by radioactive tracers has allowed to establish an order of phases degradation and to consider the kinetics of calcium ions in function of several parameters of tests. (N.C.)

  13. Physico-chemical reactions in the underground movement of radioactive isotopes

    International Nuclear Information System (INIS)

    Gailledreau, C.

    The physico-chemical state of the radioelements moving underground can influence considerably their migration velocity. In the case of 90 Sr--held on by monmorillonites, apatites, activated aluminum oxide--the occurrence of electronegative colloids, sorbing selectively 90 Sr results in an immediate break-through of this isotope. This phenomenon has been demonstrated in the case of the calcite phosphate reaction. A high pH is generally favorable to 90 Sr sorption (apatite, aluminum oxide). The occurrence of Ca 2+ ions acts very unfavorably on 90 Sr sorption by minerals specifics of this isotope (apatite, aluminum oxide). The same thing occurs with organic matters 137 Cs sorption, attributed to illitic clays, is little sensitive to the nature of the solution. Ruthenium-106 seems to move underground chiefly as a nitrosylruthenium hydroxide complex. This complex would be weakly sorbed on soil colloids by London--Van der Waals forces

  14. Physico-chemical and microbiological properties of raw fermented sausages are not influenced by color differences of turkey breast meat.

    Science.gov (United States)

    Popp, J; Krischek, C; Janisch, S; Wicke, M; Klein, G

    2013-05-01

    It has been suggested that the color of turkey breast meat influences both physico-chemical and microbiological properties of raw fermented sausages. In this study, raw fermented sausages were produced with turkey breast meat in 3 different colors (pale, normal, or dark), which were obtained from 2 fast-growing-genetic-line toms at 2 slaughterhouses. Prior to the sausage production, the breast muscles were sorted into color groups according to the lightness values determined at 24 h postmortem. This meat was subsequently processed to raw fermented sausages using 1.5 or 2.5% curing salt (CS). The pale meat had higher lightness, electrical conductivity, and drip loss, whereas the dark meat showed a darker color only. The physico-chemical (pH, water activity), visual (lightness, redness), and microbial (total plate count) properties of the sausages were not influenced by the color of the turkey breast meat. The sausage made with 2.5% CS had lower aw and higher ash and hardness values than the sausages produced with 1.5% CS. In conclusion, processing of differently colored turkey meat to raw fermented sausages does not influence the quality characteristics of the products. Based on these findings, there is no reason for the sausage producer to separate turkey breast muscles by color before producing raw fermented sausages.

  15. Gamma radiation effects on some nutritional and physico-chemical characteristics of stored beans (Phaseolus vulgaris L.)

    International Nuclear Information System (INIS)

    Mancini Filho, J.

    1990-01-01

    The radiation effects on physico-chemical and nutritional characteristics of three Brazilian varieties of beans (Phaseolus vulgaris, L.) - Catu, Rajado and Carioca -were studied. The analytical parameters were obtained by the determination of soaking and cooking times, biological value in rats, protein electrophoretic profile, reductors sugars, oligosaccharides, fiber and fatty acids content. Also, amyloglucosidase, phytohemagglutinins, α-amylase and tryptic inhibitors activities were analysed. It was observed the gamma radiation until determined doses promotes changes on those parameters subsequently reducing substantially the cooking time without modification of the biological value of the proteins. This alteration was particularly noticed in the hard-to-cook beans. (author)

  16. Phytoplankton diversity and its relationships to the physico-chemical environment in the Banglang Reservoir, Yala Province

    Directory of Open Access Journals (Sweden)

    Saowapa Angsupanich

    2004-09-01

    Full Text Available The diversity of phytoplankton and its relationships to the physico- chemical environment were studied in Banglang Reservoir, located on the Pattani River in Southern Thailand. Samples were collected monthly from May 2000 to April 2001 at three stations and three different depths: water surface, 10, and 30 meters. Physico-chemical parameters: temperature, pH, dissolved oxygen, alkalinity, conductivity, water transparency, and nutrients were measured simultaneously. One-hundred and thirty-five species in seven divisions of phytoplankton were found. The greatest number of species were in Division Chlorophyta (50%, followed by Cyanophyta (21%, Bacillariophyta (13%, Pyrrophyta (6%, Cryptophyta (4%, Chrysophyta (3% and Euglenophyta (3%. The most diverse genus was Staurastrum (15 species. Phytoplankton density ranged from zero to 2.1x109 cells.m-3. Microcystis aeruginosa Kutzing in January at 30 m at the lacustrine zone had the highest phytoplankton density. By applying a PCA(principal components analysis using the MVSP statistical analysis program on the abundance of species, it was found that Cyclotella meneghiniana Kutzing and Melosira varians Agardh were the most abundant in each station. Diversity index (Simpson’s diversity index was maximum at 10 m at the transition zone and lowest at the outflow zone. The factors affecting the phytoplankton species by Canonical correspondence analysis ordination (PC-ORD programwere alkalinity, water temperature, water transparency, nutrients and conductivity. When the water quality parameters were classified by the trophic level, Banglang Reservoir belonged to oligo-mesotrophic status. Furthermore, Cyclotella meneghiniana Kutzing and Melosira varians Agardh could be used as the phytoplankton indicator of oligo-mesotrophic reservoir.

  17. Physico-chemical and sensory evaluation of potato (Solanum tuberosum L. after irradiation

    Directory of Open Access Journals (Sweden)

    IVANESA G.M. SOARES

    2016-06-01

    Full Text Available ABSTRACT This work evaluated the effects of ionizing radiation on the physico-chemical and sensory characteristics of the potato cultivar Ágata (Solanum tuberosum L., including budding and deterioration, with the end goal of increasing shelf life. For this, four groups of samples were harvested at the maturation stage. Three of them were separately exposed to a Co-60 source, receiving respective doses of 0.10, 0.15 and 2.00 kGy, while the non-irradiated group was kept as a control. All samples were stored for 35 days at 24 °C (± 2 and at 39% relative humidity. The following aspects were evaluated: budding, rot, loss of weight, texture, flesh color, moisture, external and internal appearance, aroma, soluble solids, titratable acidity, vitamin C, protein, starch and glucose. The results indicated that 0.15 kGy was the most effective dose to reduce sprouting and post-harvest losses, under the conditions studied.

  18. Study Of The Physico-Chemical Water Quality Of The Companys Pumping Stations Chadian Water And Suburbs Of Manual Drilling Ndjamena

    Directory of Open Access Journals (Sweden)

    Mahamat Seid A.M

    2015-08-01

    Full Text Available Water for consumption requires excellent physical chemical and microbiological quality. This source of life is one of the most controlled food products. It must not only meet the quality requirements but also must comply vis- -vis a set of drinking water standards and must not contain any microorganism no noise and no substance presents a potential danger to human health. This work was performed in the city of Ndjamena and aims to assess the physico-chemical quality of the water pumping stations of the National Water Company in the city center and boreholes in human motor in neighborhoods peripheral devices. A total of 18 samples were collected including 9 in the city center and 9 others in the suburbs. On each sample were determined physico-chemical parameters potential of hydrogen pH temperature T electrical conductivity turbidity and calcium ions magnesium sulphates fluorides and nitrates. The results extend into the water pumping stations of ETS and manual drilling outlying districts respectively temperature 28.0 to 36.1 C and 29.5 to 30.3 C pH 6.5 to 8.5 and 6.3 to 7.6 electrical conductivity 201-671 amp297S cm and 136-533 amp297S cm turbidity NTU from 0.01 to 0.18 and 1.25 to 5 NTU calcium 54 to 268 mg L to 65-443 mg L magnesium 2.18 to 57 mg L and 15 to 90 mg L sulfates 2 to 47 mg L and 2 to 18mg L fluoride 0.0 to 0.61 mg L and 0.12 to 0.98 mg L and nitrate 1.5 to 18 2 mg L and 0.1 to 0.6 mg L. The results show that the contents of the parameters are consistent with the WHO standards for the quality of drinking water except calcium ions which their levels are high. Based on the parameters analyzed the quality of water pumping stations of SNE and manual drilling is acceptable.

  19. Physico-chemical/biological properties of tripolyphosphate cross-linked chitosan based nanofibers

    Energy Technology Data Exchange (ETDEWEB)

    Sarkar, Soumi Dey [School of Medical Science and Technology, Indian Institute of Technology Kharagpur, Kharagpur-721302 (India); Farrugia, Brooke L.; Dargaville, Tim R. [Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Groove, Queensland-4059 (Australia); Dhara, Santanu, E-mail: sdhara@smst.iitkgp.ernet.in [School of Medical Science and Technology, Indian Institute of Technology Kharagpur, Kharagpur-721302 (India)

    2013-04-01

    In this study, chitosan-PEO blend, prepared in a 15 M acetic acid, was electrospun into nanofibers (∼ 78 nm diameter) with bead free morphology. While investigating physico-chemical parameters of blend solutions, effect of yield stress on chitosan based nanofiber fabrication was clearly evidenced. Architectural stability of nanofiber mat in aqueous medium was achieved by ionotropic cross-linking of chitosan by tripolyphosphate (TPP) ions. The TPP cross-linked nanofiber mat showed swelling up to ∼ 300% in 1 h and ∼ 40% degradation during 30 day study period. 3T3 fibroblast cells showed good attachment, proliferation and viability on TPP treated chitosan based nanofiber mats. The results indicate non-toxic nature of TPP cross-linked chitosan based nanofibers and their potential to be explored as a tissue engineering matrix. - Highlights: ► Chitosan based nanofiber fabrication through electrospinning. ► Roles of solution viscosity and yield stress on spinnability of chitosan evidenced. ► Tripolyphosphate (TPP) cross-linking rendered structural stability to nanofibers. ► TPP cross-linking also improved cellular response on chitosan based nanofibers. ► Thus, chitosan based nanofibers are suitable for tissue engineering application.

  20. Physico-chemical/biological properties of tripolyphosphate cross-linked chitosan based nanofibers

    International Nuclear Information System (INIS)

    Sarkar, Soumi Dey; Farrugia, Brooke L.; Dargaville, Tim R.; Dhara, Santanu

    2013-01-01

    In this study, chitosan-PEO blend, prepared in a 15 M acetic acid, was electrospun into nanofibers (∼ 78 nm diameter) with bead free morphology. While investigating physico-chemical parameters of blend solutions, effect of yield stress on chitosan based nanofiber fabrication was clearly evidenced. Architectural stability of nanofiber mat in aqueous medium was achieved by ionotropic cross-linking of chitosan by tripolyphosphate (TPP) ions. The TPP cross-linked nanofiber mat showed swelling up to ∼ 300% in 1 h and ∼ 40% degradation during 30 day study period. 3T3 fibroblast cells showed good attachment, proliferation and viability on TPP treated chitosan based nanofiber mats. The results indicate non-toxic nature of TPP cross-linked chitosan based nanofibers and their potential to be explored as a tissue engineering matrix. - Highlights: ► Chitosan based nanofiber fabrication through electrospinning. ► Roles of solution viscosity and yield stress on spinnability of chitosan evidenced. ► Tripolyphosphate (TPP) cross-linking rendered structural stability to nanofibers. ► TPP cross-linking also improved cellular response on chitosan based nanofibers. ► Thus, chitosan based nanofibers are suitable for tissue engineering application

  1. Effects of the addition of blood plasma proteins on physico-chemical properties of emulsion-type pork sausage during cold storage.

    Science.gov (United States)

    Kim, Sungho; Jin, Sangkeun; Choi, Jungseok

    2017-10-01

    Most slaughter blood is discarded, resulting in problems related to costs for wastewater disposal and environmental pollution. However, animal blood contains various proteins such as albumin, globulin and globin and can be used as a natural emulsifier, stabiliser and colour additive. Thus, this study was carried out to investigate the effect of blood plasma proteins on the physico-chemical properties of emulsion-type pork sausages stored at 4°C over 5 weeks. The emulsion-type pork sausages with plasma powders had higher pH than the other treatments during week 5, and higher shear force than the control (P binder for the production of excellent meat products compared to other binders. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  2. Ion-exchange synthesis of compounds based on low-water niobium hydroxide

    International Nuclear Information System (INIS)

    Ivanova, N.E.; Sakharov, V.E.; Korovin, S.S.

    1977-01-01

    Ordinary physico-chemical methods have been used for studying the possibilities of the ion-exchange synthesis of niobates of alkaline and alkaline-earth elements based on low-water niobium hydroxide small at relatively low temperatures. It has been established that cation-exchange properties of low-water niobium hydroxide are revealed in a wide range of pH (from 8.95 to 12.4 for alkaline-earth elements and from 6.7 to 12.0 for alkaline elements). Physico-chemical study of solid phases points that there is a monophase with low-water niobium hydroxide. The rate of crystallization ageing of amorphous phases based on low-water niobium hydroxide is rather small for the samples with a M:Nb ratio less than 1.0 whereas mixed hydroxides with M:Nb ratio more than 1.0 reveal on X-ray diffraction patterns diffusion reflections after keeping in mother liquor for 5 hours-1 day

  3. Physico-chemical properties of blends of palm olein with other vegetable oils

    Directory of Open Access Journals (Sweden)

    Mobin Siddique, Bazlul

    2010-12-01

    Full Text Available Palm oil (olein was blended with other edible oils for the enhancement of its market acceptability in terms of melting point depression and shelf life. The physico-chemical properties like viscosity, density, melting behavior, peroxide value (PV, saponification value (SV and iodine value (IV of four different binary blends with four vegetable oils were evaluated. Palm olein was found to be more stable against rancidity than the other oils. For the stability against oxidation and melting point depression the palm olein-canola (PO/CO blend was found to be better than the others. The Differential Scanning Calorimeter (DSC thermogram of the melting behavior of the blends traces some new polymorphs of the triglyceride. This study will help the oil producing industry to find out the most economically viable oil blends for cooking purposes, with maximum nutrition as well as desirable physico-chemical properties.

    Aceite de palma (oleína fue mezclada con otros aceites comestibles para aumentar su aceptabilidad en el mercado en términos de descenso del punto de fusión y mejora de su almacenamiento. Las propiedades físico-químicas tales como viscosidad, densidad, comportamiento en la fusión, valor de peróxidos (PV, valor de saponificación (SV e índice de yodo (IV de cuatro diferentes mezclas binarias con cuatro aceites vegetales fueron evaluadas. La oleína de palma fue más estable frente a la rancidez que otros aceites. En la estabilidad frente la oxidación y el descenso del punto de fusión, la mezcla de oleína de palma/canola (PO/CO fue mejor que las otras. Los termogramas del calorímetro diferencial de barrido (DSC referidos al comportamiento de fusión de las mezclas indican algunos nuevos polimorfismos de los triglicéridos. Este estudio podría ayudar a las empresas que elaboran aceites a encontrar los aceites económicamente más viables para cocinar, con buenas propiedades nutricionales, así como con unas propiedades f

  4. Physico-chemical characterization and biological studies of newly ...

    Indian Academy of Sciences (India)

    SANJOY SAHA

    2018-02-01

    org/ 10.1007/ s12039-017-1409-9) contains ... and catalysis.22–26 We reported in previous articles the synthesis ..... acterization and catalytic activity of cobalt phthalo- ... Liquid phase oxidation at metal ions and complexes in.

  5. ZOOPLANKTON DIVERSITY AND ITS RELATIONSHIP WITH PHYSICO-CHEMICAL PARAMETERS IN MANI RESERVOIR OF WESTERN GHATS, REGION, HOSANAGAR TALUK, SHIVAMOGA DISTRICT KARNATAKA, INDIA

    Directory of Open Access Journals (Sweden)

    D. N. Veerendra

    2012-01-01

    Full Text Available Studies on relationship between zooplankton abundance and water quality parameter in Mani reservoir were made between January 2008 and December 2008. In the current investigation, impact of different physico-chemical parameters on zooplankton population was found. Ten genera of zooplankton were identified. The relationship between zooplankton and water quality parameters was varied from place to place depending upon the condition of the reservoir water.

  6. Physico-chemical analysis and antimicrobial potential of A pis dorsata, A pis mellifera and Z iziphus jujube honey samples from Pakistan

    Directory of Open Access Journals (Sweden)

    Hira Fahim

    2014-08-01

    Conclusion: Physico-chemical analysis of honey samples confirmed good quality of honey according to the standards set by European Union Commission and Codex Alimentarius Commission. Evaluation of these honey samples confirms antimicrobial potential of particular types of honeys indigenous to Pakistan.

  7. Physico-chemical properties of different forms of bovine lactoferrin.

    Science.gov (United States)

    Bokkhim, Huma; Bansal, Nidhi; Grøndahl, Lisbeth; Bhandari, Bhesh

    2013-12-01

    Three forms of bovine lactoferrin (Lf), apo-, native- and holo- with 0.9%, 12.9% and 99.7% iron content, respectively, were characterised for their physico-chemical properties. Colour, surface tension, thermal properties, particle charge and rheological behaviour of Lf were found to be affected by the form of Lf. The surface tension of Lf tends to decrease with decrease in iron content. The Circular Dichroism (CD) spectra confirmed that all forms of Lf had similar secondary structures while the tertiary structure was different for holo-Lf. The Differential Scanning Calorimeter (DSC) analysis showed that the apo- and holo-Lf in aqueous solution displayed thermal denaturation temperatures of 71±0.2 and 91±0.5 °C, respectively, suggesting that the iron saturation of Lf tends to increase its thermal stability. The study of particle charge properties (ζ-potential) in 1 mM KCl salt solution showed that apo-Lf reached the net charge of zero in the pH range 5.5-6.5 whereas native and holo-Lf in the pH range 8.0-9.0. The apparent viscosity of 1% (wt/wt) solution of the different forms of Lf showed no difference between apo- and native-Lf (≈1.4 mPas) while the value was significantly higher (2.38 mPas) for holo-Lf. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. Effect of radiation on the physico-chemical characteristics of tomato during storage

    International Nuclear Information System (INIS)

    Dar, N.G.; Ihsanullah; Khattak, T.N.

    2003-01-01

    Tomato samples, collected from Peshawar market, were irradiated with diff kGy and a control sample was kept for comparison. The irradiated samples were analysed every day for physico-chemical analysis i.e. pH, acidity, optical density, ascorbic acid (vitamin -C) and % ripening. Ascorbic acid and acidity were determined titrimetrically while optical density was measured with the spectrophotometer. Physical separation, ripening and spoilage were determined by visual examinations. The results showed that the ascorbic acid contents were higher in control as well as in samples irradiated with lower doses while it decreased to a level of 12.3 mg/100 g for high doses. The acidity and optical density also decreased during storage. The ripening process was delayed at higher doses. (author)

  9. The use of potato fibre to improve bread physico-chemical properties during storage.

    Science.gov (United States)

    Curti, Elena; Carini, Eleonora; Diantom, Agoura; Vittadini, Elena

    2016-03-15

    Bread staling reduction is a very important issue for the food industry. A fibre with high water holding capacity, extracted from potato peel, was studied for its ability to reduce bread staling even if employed at low level (0.4 g fibre/100 g flour). Physico-chemical properties (water activity, moisture content, frozen water content, amylopectin retrogradation) and (1)H Nuclear Magnetic Resonance molecular mobility were characterised in potato fibre added bread over 7 days of storage. Potato fibre addition in bread slightly affected water activity and moisture content, while increased frozen water content and resulted in a softer bread crumb, more importantly when the optimal amount of water was used in the formulation. Potato fibre also reduced (1)H NMR molecular mobility changes in bread crumb during storage. Potato fibre addition in bread contributed to reduce bread staling. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. physico-chemical changes in UHT treated and whole milk powder during storage at ambient temperature

    International Nuclear Information System (INIS)

    Akhtar, S.; Zahoor, T.; Hashmi, A.M.

    2003-01-01

    We studied the changes in pH, acidity and viscosity of ultra high temperature (UHT) treated and reconstituted whole milk powder (WMP) during storage of 90 days at room temperature. The samples were analyzed at 0,30,60 and 90 days intervals for these physico-chemical properties of the milk types. Values indicated an increase in acidity and viscosity with a decrease in pH with the storage time increased both in UHT treated and reconstituted whole milk powder. Apart from many enzymatic changes to deteriorate the milk, these apparent changes in milk characteristics may be one of the reasons that UHT milk cannot be kept unspoiled above 90 days and the quality of WMP is influenced within this time period. (author)

  11. The physico-chemical properties of pangas catfish (Pangasius pangasius) skin gelatin

    Science.gov (United States)

    Pradarameswari, K. A.; Zaelani, K.; Waluyo, E.; Nurdiani, R.

    2018-04-01

    Gelatin can be used as emulsifier and stabilizer in food products. Until now, the most widely used raw materials for the production of gelatin industry are cow bone, cow skin and pig skin. Fish gelatin has been highlighted as a better alternative to replace mammals gelatin based on ethical and religious perspective. Fish gelatin was extracted from Pangas catfish skin to determine its physico-chemical properties. Different temperatures (45 °C, 50 °C, 55 °C) were employed during gelatin extraction. Higher temperature increased the yield and fat contents of Pangas catfish skin gelatin. In contrary, higher water, protein, ash contents were observed during lower temperature. Temperature significantly (p fish skin gelatin. Based on the FTIR spectrum catfish skin gelatin functional groups can be identified as N-H, O-H, C = H, C-O and C-H.

  12. Physico chemical and microbiological changes in nopal (Opuntia spp.) irradiated with gamma rays of cobalt 60

    International Nuclear Information System (INIS)

    Perez N, M.

    2001-01-01

    The objective of this work is to study the physico-chemical and microbiological changes which take place in the nopal (Opuntia spp.) after they have been irradiated and stored at environment and refrigeration temperatures in order to determine the level of irradiation dose more adequate for getting them an increase in the storage life, as well as to determine the physico-chemical changes attributed to the irradiation doses used, comparing the obtained results with those ones of non-irradiated nopal samples, which are considered as control samples. The radiation source used was a GAMMABEAM-651 PT, property of the Nuclear Sciences Institute of UNAM. The nopals studied are of the variety (Milpa Alta, Opuntia ficus) which were cut and packed in polyethylene bags with and without nitrogen. In order to find the adequate dose level it was used a lot of 200 samples which were treated in sets of 10. They were irradiated in doses of 0.5 to 10 kGy at a dose reason of 3.7 kGy/h. The adequate doses for getting an increase in the storage life, where there was not darkness were of 1.5 and 2.0 kGy, allowed doses in the NOM-033-SSA1-1993, it was not found any change in acceptability by flavour, but so in the titled activity values and sugars. The lowest loss of weight was found in the 1.5 kGy dose without nitrogen and the highest in the 2.0 kGy with nitrogen dose. Likewise was determined that with the irradiation treatment in the recommended doses it is diminished the microorganisms growth, obtaining an improvement in the general appearance of the nopals during their storage period. (Author)

  13. Improvement of radiological consequence estimation methodologies for NPP accidents in the ARGOS and RODOS decision support systems through consideration of contaminant physico-chemical forms

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, K.G.; Roos, P. [Technical University of Denmark - DTU (Denmark); Lind, O.C.; Salbu, B. [Norwegian University of Life Sciences/CERAD - NMBU (Norway); Bujan, A.; Duranova, T. [VUJE, Inc. (Slovakia); Ikonomopoulos, A.; Andronopoulos, S. [National Centre for Scientific Research ' Demokritos' (Greece)

    2014-07-01

    The European standard computerized decision support systems RODOS and ARGOS, which are integrated in the operational nuclear emergency preparedness in practically all European countries, as well as in a range of non-European countries, are highly valuable tools for radiological consequence estimation, e.g., in connection with planning and exercising as well as in justification and optimization of intervention strategies. Differences between the Chernobyl and Fukushima accident atmospheric release source terms have demonstrated that differences in release conditions and processes may lead to very different degrees of volatilization of some radionuclides. Also the physico-chemical properties of radionuclides released can depend strongly on the release process. An example from the Chernobyl accident of the significance of this is that strontium particles released in the fire were oxidized and thus generally physico-chemically different from those released during the preceding explosion. This is reflected in the very different environmental mobility of the two groups of particles. The initial elemental matrix characteristics of the contaminants, as well as environmental parameters like pH, determine for instance the particle dissolution time functions, and thus the environmental mobility and potential for uptake in living organisms. As ICRP recommends optimization of intervention according to residual dose, it is crucial to estimate long term dose contributions adequately. In the EURATOM FP7 project PREPARE, an effort is made to integrate physico-chemical forms of contaminants in scenario-specific source term determination, thereby enabling consideration of influences on atmospheric dispersion/deposition, post-deposition migration, and effectiveness of countermeasure implementation. The first step in this context was to investigate, based on available experience, the important physico-chemical properties of radio-contaminants that might potentially be released to the

  14. Physiological and physico-chemical characterization of dietary fibre from the green seaweed Ulva fasciata Delile.

    Science.gov (United States)

    Carvalho, A F U; Portela, M C C; Sousa, M B; Martins, F S; Rocha, F C; Farias, D F; Feitosa, J P A

    2009-08-01

    This work aims to assess the potential of the green seaweed Ulva fasciata Delile as an alternative source of dietary fibre (DF). Total DF content was determined, some of its physico-chemical properties described and the physiological effects of U. fasciata meal on rats fed a hypercholesterolemic diet were investigated. U. fasciata may be considered a potential alternative source of DF with a total content of about 400 g.kg-1 (dry basis) and interesting physico-chemical properties: water retention capacity of 8.74 g/water.g-1 dry sample (seaweed meal) and 0.90 (seaweed carbohydrate extract), lipid adsorption capacity of 4.52 g/oil.g-1 dry sample (seaweed meal) and 5.70 (seaweed carbohydrate extract), intrinsic viscosity of 2.4 dl.g-1 (seaweed carbohydrate extract) and cation exchange capacity of 3.51 Eq.kg-1 (seaweed carbohydrate extract). The diet containing seaweed meal was able to keep rats' total cholesterol (TC) down without causing any undesirable increase in LDL-C fraction. No evidence of toxic and/or antinutritional components in the seaweed meal was detected. Rats showed a fecal volume much greater (13 g) than that fed on cellulose diet (7 g) (p seaweed the potential to be used in food technology for the acquisition of low-calorie food and might be important in body weight control, reduction of blood TC and LDL-C as well as in prevention of gastrointestinal diseases.

  15. Physiological and physico-chemical characterization of dietary fibre from the green seaweed Ulva fasciata Delile

    Directory of Open Access Journals (Sweden)

    AFU. Carvalho

    Full Text Available This work aims to assess the potential of the green seaweed Ulva fasciata Delile as an alternative source of dietary fibre (DF. Total DF content was determined, some of its physico-chemical properties described and the physiological effects of U. fasciata meal on rats fed a hypercholesterolemic diet were investigated. U. fasciata may be considered a potential alternative source of DF with a total content of about 400 g.kg-1 (dry basis and interesting physico-chemical properties: water retention capacity of 8.74 g/water.g-1 dry sample (seaweed meal and 0.90 (seaweed carbohydrate extract, lipid adsorption capacity of 4.52 g/oil.g-1 dry sample (seaweed meal and 5.70 (seaweed carbohydrate extract, intrinsic viscosity of 2.4 dl.g-1 (seaweed carbohydrate extract and cation exchange capacity of 3.51 Eq.kg-1 (seaweed carbohydrate extract. The diet containing seaweed meal was able to keep rats' total cholesterol (TC down without causing any undesirable increase in LDL-C fraction. No evidence of toxic and/or antinutritional components in the seaweed meal was detected. Rats showed a fecal volume much greater (13 g than that fed on cellulose diet ( 7 g (p < 0.05. These properties confer on the seaweed the potential to be used in food technology for the acquisition of low-calorie food and might be important in body weight control, reduction of blood TC and LDL-C as well as in prevention of gastrointestinal diseases.

  16. Soil physico-chemical characterization in the different soil layers of National Maize Research Program, Rampur, Chitwan, Nepal

    Directory of Open Access Journals (Sweden)

    Dinesh Khadka

    2017-12-01

    Full Text Available Soil pit digging and their precise study is a decision making tool to assess history and future of soil management of a particular area. Thus, the present study was carried out to differentiate soil physico-chemical properties in the different layers of excavated pit of the National Maize Research Program, Rampur, Chitwan, Nepal. Eight pits were dug randomly from three blocks at a depth of 0 to 100 cm. The soil parameters were determined in-situ, and in laboratory for texture, pH, OM, N, P (as P2O5, K (as K2O, Ca, Mg, S, B, Fe, Zn, Cu and Mn of collected soils samples of different layers following standard analytical methods at Soil Science Division, Khumaltar. The result revealed that soil structure was sub-angular in majority of the layers, whereas bottom layer was single grained. The value and chrome of colour was increasing in order from surface to bottom in the majority pits. Similarly, the texture was sandy loam in majority layers of the pits. Moreover, four types of consistence (loose to firm were observed. Furthermore, mottles and gravels were absent in the majority layers. Likewise, soil was very to moderately acidic in observed layers of majority pits, except bottom layer of agronomy block was slightly acidic. Regarding fertility parameters (OM, macro and micronutrients, some were increasing and vice-versa, while others were intermittent also. Therefore, a single layer is not dominant for particular soil physico-chemical parameters in the farm. In overall, surface layer is more fertile than rest of the layers in all the pits.

  17. Phospholipids fatty acids of drinking water reservoir sedimentary microbial community: Structure and function responses to hydrostatic pressure and other physico-chemical properties.

    Science.gov (United States)

    Chai, Bei-Bei; Huang, Ting-Lin; Zhao, Xiao-Guang; Li, Ya-Jiao

    2015-07-01

    Microbial communities in three drinking water reservoirs, with different depth in Xi'an city, were quantified by phospholipids fatty acids analysis and multivariate statistical analysis was employed to interpret their response to different hydrostatic pressure and other physico-chemical properties of sediment and overlying water. Principle component analyses of sediment characteristics parameters showed that hydrostatic pressure was the most important effect factor to differentiate the overlying water quality from three drinking water reservoirs from each other. NH4+ content in overlying water was positive by related to hydrostatic pressure, while DO in water-sediment interface and sediment OC in sediment were negative by related with it. Three drinking water reservoir sediments were characterized by microbial communities dominated by common and facultative anaerobic Gram-positive bacteria, as well as, by sulfur oxidizing bacteria. Hydrostatic pressure and physico-chemical properties of sediments (such as sediment OC, sediment TN and sediment TP) were important effect factors to microbial community structure, especially hydrostatic pressure. It is also suggested that high hydrostatic pressure and low dissolved oxygen concentration stimulated Gram-positive and sulfate-reducing bacteria (SRB) bacterial population in drinking water reservoir sediment. This research supplied a successful application of phospholipids fatty acids and multivariate analysis to investigate microbial community composition response to different environmental factors. Thus, few physico-chemical factors can be used to estimate composition microbial of community as reflected by phospholipids fatty acids, which is difficult to detect.

  18. Chemical synthesis on SU-8

    DEFF Research Database (Denmark)

    Qvortrup, Katrine; Taveras, Kennedy; Thastrup, Ole

    2011-01-01

    In this paper we describe a highly effective surface modification of SU-8 microparticles, the attachment of appropriate linkers for solid-supported synthesis, and the successful chemical modification of these particles via controlled multi-step organic synthesis leading to molecules attached...

  19. Effects of riverbed extraction on physico-chemical parameters of Tinau River, Nepal

    Directory of Open Access Journals (Sweden)

    K.R. Dahal

    2012-09-01

    Full Text Available This study was carried out during June 2010 to March 2011 in the Tinau River, Nepal. The level of pollution was determined based on the protocol of US EPA (Habitat Assessment Protocol. Riverbed extraction was occurring in very large scale in this river since 2002. Five sampling stations were selected to carry out the study. Some specific physico-chemical parameters like Electrical Conductivity (EC, Lead (Pb, pH, Iron (Fe, Phosphorous (P, Ammonia (NH4+, Nitrate (NO3-, Arsenic (As, Total Dissolved Solids (TDS were analyzed. Three major parameters (Pb, As and TDS were closely related to the riverbed extraction and exceeded the limit set by WHO for drinking water. Similar relationship was also seen for EC; however its concentrations did not exceed the limit of WHO. The river water was slightly alkaline based on the pH value (ranging from 7.5 to 9.Other parameters did not seem to be related to the riverbed extraction. However, the nitrate and phosphorous concentrations were also high during the present investigation. Lack of similar studies prevented us to compare the result; however these findings provide the baseline data for future work.

  20. Synthesis, structural and physico-chemical studies of the monocrystal superconductor oxides Hg Ba{sub 2} Ca{sub n-1} Cu{sub n} O{sub 2n+2+{delta}}; Synthese, etudes structurales et physico-chimiques de monocristaux d`oxydes supraconducteurs Hg Ba{sub 2} Ca{sub n-1} Cu{sub n} O{sub 2n+2+{delta}}

    Energy Technology Data Exchange (ETDEWEB)

    Viallet-Guillen, Virginie [Dept. de Recherche sur l` Etat Condense, CEA Centre d` Etudes de Saclay, 91 - Gif-sur-Yvette (France)

    1998-01-01

    The thesis presents the synthesis and the structural and physico-chemical properties of the mercury-based monocrystal superconductor oxides. The results reported in the first chapter refer to the first three members of the mercury cuprate series Hg-1201, Hg-1212 and Hg-1223. In the second chapter detailed results concerning the structure of these compounds are given highlighting the features common to all cuprates and pointing out the peculiarities of mercury phases. The third chapter presents the phase diagrams ({delta}, T, p(O{sub 2})) of the compounds HgBa{sub 2}CuO{sub 4+{delta}} and HgBa{sub 2}Ca{sub 2}Cu{sub 3}O{sub 8+{delta}} obtained by thermogravimetry under controlled atmosphere between 150 deg.C and 500 deg.C and thermodynamic equilibrium conditions. In the case of Hg-1201, the critical temperature shows a variation close to a parabolic law, with an optimal Tc of 96 K ({delta}{approx_equal}0.10) while in Hg-1223 the Tc increases linearly with the O content up to the optimal Tc of 135 K ({delta}{approx_equal}0.19) and decreases only by 2 K in the over-doped regime. Finally, in the fourth chapter different physical properties are reviewed. The obtained monocrystals allowed studying the resistive transitory anisotropy, the torque, the specific heat, the nuclear magnetic resonance and the Raman diffusion 212 refs., 106 figs., 30 tabs.

  1. Synthesis and spectral studies of some lanthanide(III) complexes ...

    African Journals Online (AJOL)

    ... compounds were characterized through various physico-chemical studies. The coordinating ligand DABAAPS behave as tridentate N,N,O-donors. The central metal ion displays the coordination number nine in these complexes. Thermal stabilities of these complexes were also studied through thermogravimetric analysis.

  2. Physico-chemical mechanism for the vapors sensitivity of photoluminescent InP quantum dots

    Science.gov (United States)

    Prosposito, P.; De Angelis, R.; De Matteis, F.; Hatami, F.; Masselink, W. T.; Zhang, H.; Casalboni, M.

    2016-03-01

    InP/InGaP surface quantum dots are interesting materials for optical chemical sensors since they present an intense emission at room temperature, whose intensity changes rapidly and reversibly depending on the composition of the environmental atmosphere. We present here their emission properties by time resolved photoluminescence spectroscopy investigation and we discuss the physico-chemical mechanism behind their sensitivity to the surrounding atmosphere. Photoluminescence transients in inert atmosphere (N2) and in solvent vapours of methanol, clorophorm, acetone and water were measured. The presence of vapors of clorophorm, acetone and water showed a very weak effect on the transient times, while an increase of up to 15% of the decay time was observed for methanol vapour exposure. On the basis of the vapor molecule nature (polarity, proticity, steric hindrance, etc.) and of the interaction of the vapor molecules with the quantum dots surface a sensing mechanism involving quantum dots non-radiative surface states is proposed.

  3. Physico-chemical mechanism for the vapors sensitivity of photoluminescent InP quantum dots

    International Nuclear Information System (INIS)

    Prosposito, P.; De Angelis, R.; De Matteis, F.; Casalboni, M.; Hatami, F.; Masselink, W.T.; Zhang, H.

    2016-01-01

    InP/InGaP surface quantum dots are interesting materials for optical chemical sensors since they present an intense emission at room temperature, whose intensity changes rapidly and reversibly depending on the composition of the environmental atmosphere. We present here their emission properties by time resolved photoluminescence spectroscopy investigation and we discuss the physico-chemical mechanism behind their sensitivity to the surrounding atmosphere. Photoluminescence transients in inert atmosphere (N 2 ) and in solvent vapours of methanol, chloroform, acetone and water were measured. The presence of vapors of chloroform, acetone and water showed a very weak effect on the transient times, while an increase of up to 15% of the decay time was observed for methanol vapour exposure. On the basis of the vapor molecule nature (polarity, proticity, steric hindrance, etc.) and of the interaction of the vapor molecules with the quantum dots surface a sensing mechanism involving quantum dots non-radiative surface states is proposed. (paper)

  4. Physico-chemical trends in the sediments of Agbede Wetlands, Nigeria

    Directory of Open Access Journals (Sweden)

    Dirisu Abdul-Rahman

    2017-07-01

    Full Text Available This study assessed the physico-chemical status of sediments in the Agbede Wetlands with the aim to create a reference archive for the Edo North catchment and to further identify the characteristics mostly influenced by the natural and anthropogenic activities going on at the watershed. Nutrients, zinc, nickel and lead were identified to be mostly of anthropogenic origin, while alkali metals and alkaline earth metals were from both anthropogenic and natural sources. The clustering of stations 1 and 4 indicates that the sediment quality in the lentic systems was not completely excluded from the lotic system, suggesting that principal component analysis (PCA and cluster analysis (CA techniques are invaluable tools for identifying factors influencing the sediment quality. The mean values of the particle size distribution were in the following order across the ecosystems: sand (61.86–80.53% > silt (9.75–30.34% > clay (7.83–13.89%. The contamination of the water bodies was primarily derived from agricultural run-offs and through geochemical weathering of the top soils. Therefore, our analysis indicates that the concentrations of cations, anions and nutrients in the sediments of the lotic and lentic ecosystems in Agbede Wetlands are not at an alarming level.

  5. A comprehensive study of the toxicity of natural multi-contaminated sediments: New insights brought by the use of a combined approach using the medaka embryo-larval assay and physico-chemical analyses.

    Science.gov (United States)

    Barjhoux, Iris; Clérandeau, Christelle; Menach, Karyn Le; Anschutz, Pierre; Gonzalez, Patrice; Budzinski, Hélène; Morin, Bénédicte; Baudrimont, Magalie; Cachot, Jérôme

    2017-08-01

    Sediment compartment is a long term sink for pollutants and a secondary source of contamination for aquatic species. The abiotic factors controlling the bioavailability and thus the toxicity of complex mixtures of pollutants accumulated in sediments are poorly documented. To highlight the different factors influencing sediment toxicity, we identified and analyzed the physico-chemical properties, micro-pollutant contents, and toxicity level of six contrasted sediments in the Lot-Garonne continuum. Sediment toxicity was evaluated using the recently described Japanese medaka (Oryzias latipes) embryo-larval assay with direct exposure to whole sediment (MELAc). Multiple toxicity endpoints including embryotoxicity, developmental defects and DNA damage were analyzed in exposed embryos. Chemical analyses revealed significant variations in the nature and contamination profile of sediments, mainly impacted by metallic trace elements and, unexpectedly, polycyclic aromatic hydrocarbons. Exposure to sediments induced different toxic impacts on medaka early life stages when compared with the reference site. Principal component analysis showed that the toxic responses following exposure to sediments from the Lot River and its tributary were associated with micro-pollutant contamination: biometric measurements, hatching success, genotoxicity, craniofacial deformities and yolk sac malabsorption were specifically correlated to metallic and organic contaminants. Conversely, the main biological responses following exposure to the Garonne River sediments were more likely related to their physico-chemical properties than to their contamination level. Time to hatch, cardiovascular injuries and spinal deformities were correlated to organic matter content, fine particles and dissolved oxygen levels. These results emphasize the necessity of combining physico-chemical analysis of sediment with toxicity assessment to accurately evaluate the environmental risks associated with sediment

  6. Computerized tomography with X-rays: an instrument in the analysis physico-chemical between formations and drilling fluids interactions

    International Nuclear Information System (INIS)

    Coelho, Marcus Vinicius Cavalcante

    1998-01-01

    In this study it is demonstrated the applicability of the Computerized Tomography technique with x-rays to evaluate the reactivity degree between various drilling fluids and argillaceous sediments (Shales and Sandstones). The research has been conducted in the Rock-Fluid Interaction Pressure Simulator (RFIPS), where the possible physico-chemical alterations can be observed through successive tomography images, which are obtained during the flow of the fluid through the samples. In addition, it was noticed the formation of mud cake in Berea Sandstones samples in the RFIPS, though the Computerized Tomography with X-rays, when utilizing drilling fluids weighted with the baryte. (author)

  7. Variability of standard artificial soils: Physico-chemical properties and phenanthrene desorption measured by means of supercritical fluid extraction

    International Nuclear Information System (INIS)

    Bielská, Lucie; Hovorková, Ivana; Komprdová, Klára; Hofman, Jakub

    2012-01-01

    The study is focused on artificial soil which is supposed to be a standardized “soil like” medium. We compared physico-chemical properties and extractability of Phenanthrene from 25 artificial soils prepared according to OECD standardized procedures at different laboratories. A substantial range of soil properties was found, also for parameters which should be standardized because they have an important influence on the bioavailability of pollutants (e.g. total organic carbon ranged from 1.4 to 6.1%). The extractability of Phe was measured by supercritical fluid extraction (SFE) at harsh and mild conditions. Highly variable Phe extractability from different soils (3–89%) was observed. The extractability was strongly related (R 2 = 0.87) to total organic carbon content, 0.1–2 mm particle size, and humic/fulvic acid ratio in the following multiple regression model: SFE (%) = 1.35 * sand (%) − 0.77 * TOC (%)2 + 0.27 * HA/FA. - Highlights: ► We compared properties and extractability of Phe from 25 different artificial soils. ► Substantial range of soil properties was found, also for important parameters. ► Phe extractability was measured by supercritical fluid extraction (SFE) at 2 modes. ► Phe extractability was highly variable from different soils (3–89%). ► Extractability was strongly related to TOC, 0.1–2 mm particles, and HA/FA. - Significant variability in physico-chemical properties exists between artificial soils prepared at different laboratories and affects behavior of contaminants in these soils.

  8. Cinética e caracterização físico-química do fermentado do pseudofruto do caju (Anacardium occidentale L. Kinetic and physico-chemical characterization of cashew (Anacardium occidentale L. wine

    Directory of Open Access Journals (Sweden)

    Alberto B. Torres Neto

    2006-06-01

    Full Text Available The production of cashew apple wine has the purpose of minimizing the wastage in the Brazilian cashew production. Knowing that the cashew apple fermentation produces a good cashew wine, a study of alcoholic fermentation kinetics of the cashew apple and the physico-chemical characterization of the product were made. The cashew wine was produced in an stirred batch reactor. The results of the physico-chemical analysis of volatiles, residual sugars, total acidity and pH of cashew wine showed that their concentrations were within the standard limits established by the Brazilian legislation for fruit wines.

  9. Nucleic acid and nucleotide-mediated synthesis of inorganic nanoparticles

    Science.gov (United States)

    Berti, Lorenzo; Burley, Glenn A.

    2008-02-01

    Since the advent of practical methods for achieving DNA metallization, the use of nucleic acids as templates for the synthesis of inorganic nanoparticles (NPs) has become an active area of study. It is now widely recognized that nucleic acids have the ability to control the growth and morphology of inorganic NPs. These biopolymers are particularly appealing as templating agents as their ease of synthesis in conjunction with the possibility of screening nucleotide composition, sequence and length, provides the means to modulate the physico-chemical properties of the resulting NPs. Several synthetic procedures leading to NPs with interesting photophysical properties as well as studies aimed at rationalizing the mechanism of nucleic acid-templated NP synthesis are now being reported. This progress article will outline the current understanding of the nucleic acid-templated process and provides an up to date reference in this nascent field.

  10. Comparison of numerical and physico-chemical models for on-line spectrophotometric control of uranium

    International Nuclear Information System (INIS)

    Corriou, J.P.; Boisde, G.

    1986-04-01

    In view of on-line spectrophotometric control of fuel reprocessing streams, a physico-chemical model able to predict uranium and nitric acid concentrations in an uranyl nitrate-nitric acid system has been searched. Thus the influences of the following parameters: uranium, nitrate, hydrogen ion concentrations, ionic strength, on the equilibria of complexation of uranium (VI) nitrate have been evaluated. Extinction coefficients for the uranium mononitrate and uranium dinitrate complexes are given between 410 and 440 nm. The apparent equilibrium constants are determined as a function of the ionic strength. The limitations of this predictive model are emphasized and comparisons with numerical models are discussed. (16 refs)

  11. A greenhouse study on arsenic remediation potential of Vetiver grass (Vetiveria Zizanioides) as a function of soil physico-chemical properties

    Science.gov (United States)

    Quispe, M. A.; Datta, R.; Sarkar, D.; Sharma, S.

    2006-05-01

    Arsenic is one of the most harmful and toxic metals, being a Group A human carcinogen. Mining activities as well as the use of arsenic-containing pesticides have resulted in the contamination of a wide variety of sites including mine tailings, cattle dip sites, wood treatment sites, pesticide treatment areas, golf courses, etc. Phytoremediation has emerged as a novel and promising technology, which uses plants to clean up contaminated soil and water taking advantage of plant's natural abilities to extract and accumulate various contaminants. This method has distinct advantages, since it maintains the biological properties and physical structure of the soil, is environment friendly, and above all, inexpensive. However, effective remediation of contaminated residential soils using a specific plant species is an immensely complex task whose success depends on a multitude of factors including the ability of the target plant to uptake, translocate, detoxify, and accumulate arsenic in its system. One of the major challenges in phytoremediation lies in identifying a fast- growing, high biomass plant that can accumulate the contaminant in its harvestable parts. vetiver grass (Vetiveria zizanioides) is a fast-growing perennial grass with strong ecological adaptability and large biomass. While this plant is not a hyperaccumulator of arsenic, it has been reported to be able to tolerate and accumulate considerable amounts of arsenic. Being a high biomass, fast-growing plant, vetiver has the potential to be used for arsenic remediation. The present study investigates the potential of vetiver grass to tolerate and accumulate arsenic in soils with varying physico-chemical properties. A greenhouse study is in progress to study the uptake, tolerance and stress response of vetiver grass to inorganic arsenical pesticide. A column study was set up using 5 soils (Eufaula, Millhopper, Orelia, Orla, and Pahokee Muck) contaminated with sodium arsenite at 4 different concentrations of

  12. Comparative study between bioapatite and synthetic hydroxyapatite obtained by chemical precipitation and mechanochemical synthesis

    International Nuclear Information System (INIS)

    Quispe M, J.; Moreno, M.; Montano, J.; Pillaca, M.; Guzman, A.; Cavero, A.; Arce, M.

    2009-01-01

    A comparative study between the inorganic component of a human bone tissue with respect of apatite synthesized by chemical precipitation, mechanochemical synthesis and a sample of commercial hidroxyapatite are shown. The samples were studied by X-ray diffraction, atomic absorption spectroscopy and Fourier transform infrared spectroscopy. The results show similar structural characteristics among all samples identifying that sample prepared by mechanochemical synthesis is a kind of hydroxyapatite which has substitutions of carbonate in its crystalline structure, similar to the inorganic component of bone tissue. (author).

  13. PHYSICO-CHEMICAL EVALUATION OF AN EFFLUENT TREATED IN ANAEROBIC BIODIGESTER REGARDING ITS EFFICIENCE AND APPLICATION AS FERTILIZER

    OpenAIRE

    Lopes da Silva, Wilson Tadeu; de Novaes, Antonio Pereira; Kuroki, Vivian; de Almeida Martelli, Lilian Fernanda; Magnoni Junior, Lourenco

    2012-01-01

    PHYSICO-CHEMICAL EVALUATION OF AN EFFLUENT TREATED IN ANAEROBIC BIODIGESTER REGARDING ITS EFFICIENCE AND APPLICATION AS FERTILIZER. The use of biodigester for basic and environmental sanitation has large demand in Brazil. A biodigester was built to treat conjunctly the human and pig feces and urine, regarding to its future application in rural small towns. The results show that the biodigester can reduce 90% of COD and BOD and, up to 99.99% of thermotolerant coliforms. The treated effluent ha...

  14. Comparison of physico-chemical parameters of groundwater from shallow aquifers near 2 thermal power plants in Punjab

    International Nuclear Information System (INIS)

    Gill, S.K.; Sahota, S.K.; Sahota, G.P.S.; Sahota, B.K.; Sahota, H.S.

    1993-01-01

    Physico-chemical parameters of groundwater from shallow aquifers near thermal power plants at Bathinda and Ropar have been measured. Increase in metallic content of water is noted in both the cases due to deposition of coal fly ash from the power plants on the soil. High values of calcium chloride, calcium carbonate and total dissolved solids are observed in Bathinda groundwater while Ropar groundwater is rich in ferric, fluoride and nitrate contents. (author). 8 refs., 1 fig., 1 tab

  15. Green chemistry for chemical synthesis

    OpenAIRE

    Li, Chao-Jun; Trost, Barry M.

    2008-01-01

    Green chemistry for chemical synthesis addresses our future challenges in working with chemical processes and products by inventing novel reactions that can maximize the desired products and minimize by-products, designing new synthetic schemes and apparati that can simplify operations in chemical productions, and seeking greener solvents that are inherently environmentally and ecologically benign.

  16. Green chemistry for chemical synthesis.

    Science.gov (United States)

    Li, Chao-Jun; Trost, Barry M

    2008-09-09

    Green chemistry for chemical synthesis addresses our future challenges in working with chemical processes and products by inventing novel reactions that can maximize the desired products and minimize by-products, designing new synthetic schemes and apparati that can simplify operations in chemical productions, and seeking greener solvents that are inherently environmentally and ecologically benign.

  17. Effects of water physico-chemical parameters on tilapia (Oreochromis niloticus growth in earthen ponds in Teso North Sub-County, Busia County

    Directory of Open Access Journals (Sweden)

    Agano J. Makori

    2017-11-01

    Full Text Available Abstract Small-scale fish farmers in developing countries are faced with challenges owing to their limited information on aquaculture management. Nile tilapia farmers in Teso North Sub-County recorded lower yields than expected in 2009 despite having been provided with required inputs. Water quality was suspected to be the key factor responsible for the low yields. This study sought to assess the effects of earthen pond water physico-chemical parameters on the growth of Nile tilapia in six earthen fish ponds under semi-intensive culture system in Teso North Sub-County. The study was longitudinal in nature with pond water and fish being the units of analysis. Systematic sampling was used to select five ponds while a control pond was purposively selected based on its previously high harvest. Four ponds were fed by surface flow and two by underground water. Each pond was fertilized and stocked with 900 fry of averagely 1.4 g and 4.4 cm. Physico-chemical parameters were measured in-situ using a multi-parameter probe. Sixty fish samples were randomly obtained from each pond fortnightly for four months using a 10 mm mesh size and measured, weighed and returned into the pond. Mean range of physico-chemical parameters were: dissolved oxygen (DO 4.86–10.53 mg/l, temperature 24-26 °C, pH 6.1–8.3, conductivity 35–87 μS/cm and ammonia 0.01–0.3 mg/l. Temperature (p = 0.012 and conductivity (p = 0.0001 levels varied significantly between ponds. Overall Specific Growth Rate ranged between 1.8% (0.1692 g/day and 3.8% (1.9 g/day. Ammonia, DO and pH in the ponds were within the optimal levels for growth of tilapia, while temperature and conductivity were below optimal levels. As temperature and DO increased, growth rate of tilapia increased. However, increase in conductivity, pH and ammonia decreased fish growth rate. Temperature and DO ranging between 27 and 30 °C and 5–23 mg/l, respectively, and SGR of 3.8%/day and above are

  18. Physico-chemical and antioxidant properties of two medicinal wild plants grown in Moldova region

    Directory of Open Access Journals (Sweden)

    Sorina Ropciuc

    2015-05-01

    Full Text Available The major objective of this study is to report physico-chemical (moisture, ash, protein, total phenolic compounds and ascorbic acid and the antioxidant properties of methanol extracts of nettle (Urtica dioica L. and typical romaine spice "leurda" (Allium ursinum, wild garlic fresh and dried. The antioxidant properties of methanol extract of medicinal herbs were evaluated using free radical scavenging test. The phenols were extracted from the medicinal plants with methanol solvent and were quantified by the Folin-Ciocalteu method. The ascorbic acid content varied between 77.94 mg/100g in the fresh Urtica dioica L. and 39.55 from fresh Allium ursinum. The results showed that the total phenolic compounds in all medicinal plants decreased along processing. These results suggest that the medicinal plants sample extract with highest polyphenolic content will indicates the possibility of using them  as ingredients in functional foods.

  19. A chemometric analysis of ligand-induced changes in intrinsic fluorescence of folate binding protein indicates a link between altered conformational structure and physico-chemical characteristics

    DEFF Research Database (Denmark)

    Bruun, Susanne W; Holm, Jan; Hansen, Steen Ingemann

    2009-01-01

    Ligand binding alters the conformational structure and physico-chemical characteristics of bovine folate binding protein (FBP). For the purpose of achieving further information we analyzed ligand (folate and methotrexate)-induced changes in the fluorescence landscape of FBP. Fluorescence excitation...... of folate accords fairly well with the disappearance of strongly hydrophobic tryptophan residues from the solvent-exposed surface of FBP. The PARAFAC has thus proven useful to establish a hitherto unexplained link between parallel changes in conformational structure and physico-chemical characteristics...... of FBP induced by folate binding. Parameters for ligand binding derived from PARAFAC analysis of the fluorescence data were qualitatively and quantitatively similar to those obtained from binding of radiofolate to FBP. Herein, methotrexate exhibited a higher affinity for FBP than in competition...

  20. Effect of physico-chemical treatments on ripening behavior and post-harvest quality of Amrapali mango (Mangifera indica L.) during storage.

    Science.gov (United States)

    Singh, Pankaj; Singh, Manoj Kumar; Kumar, Vipin; Kumar, Mukesh; Malik, Sunil

    2012-03-01

    An experiment was done to assess the effect of various physico-chemical treatments on ripening behavior and post harvest quality of mango cv. Amrapali. The experiment was planned under completely randomized design (CRD) with three replications. The treatment units was five fruits per replication. Total 14 treatments were applied. Out of these, ethrel 750 ppm treated fruits showed better results in respect of specific gravity (0.88), moisture loss (8.45%), decay (2.5%), total soluble solids (TSS, 20.7 degrees brix), sugar content (14.39%) and acidity content (0.32) followed by ethrel 500 ppm; specific gravity (0.90), moisture loss (8.82%), decay (3.5%), TSS (20.7 degrees brix), sugar content (13.99%) and acidity content (0.36%). The pedicellate fruits and ethrel+bavistin (750+1000 ppm) were also found to be significantly superior over control in respect of specific gravity (0.88 and 0.86), moisture loss (9.10 and 9.33%), decay (4.0 and 5.33%), TSS (20.1 and 20.4 degrees brix), sugar content (12.70 and 12.80%) and acidity content (0.42 and 0.38%), respectively. Based on results of this study, it can be concluded that ethrel 750 ppm was found to be the most suitable treatment in improving physico-chemical traits i.e. ripening, storage, quality and shelf-life for commercial purpose in mango.

  1. Physico-chemical investigations of limestones from different localities in the Republic of Macedonia

    International Nuclear Information System (INIS)

    Arabadzhiev, Dimitrios M.; Stefov, Viktor; Boev, Blazho

    2001-01-01

    Physico-chemical investigations were carried out for limestone samples at different localities in the Republic of Macedonia: mine for nonmetals O graiden , Strumica (sample-granulation below: 4, 10, 20, 32, 40, 63 and 90 gm), A.D. M ikrogranulat , Gostivar, mine 'Banjani' - Skopje, mine 'Toplica' near Demir Hisar and from the separation of GP Mavrovo, Skopje, located near Pletvar. Investigation of samples from the previously mentioned localities were carried out using different methods: volumetry, gravimetry, UV-VIS and infrared spectroscopy, as well as atomic absorption and X-ray fluorescence spectrometry, X-ray diffraction and flame photometry. The obtained results lead to the conclusion that all granulometric classes of the limestone samples from 'Ograzhden', Strumica, are of the best quality. (Original)

  2. Evaluation of Physico-chemical Parameters of Manchar Lake Water and Their Comparison with Other Global Published Values

    Directory of Open Access Journals (Sweden)

    Muhammad Balal Arain

    2008-12-01

    Full Text Available The aim of current study was to evaluate the status of the Manchar lake water with respect to different physico-chemical parameters (electric conductivity, pH, chloride, phosphate, sulfate, total alkalinity, potassium, calcium, magnesium, manganese, iron, cadmium, copper, arsenic, nickel, zinc, chromium lead and selenium in 2005-2007. Among the elemental investigation of Manchar Lake water except Co, Cr, Cu and Mn, other elements (Al, As, Ca, Cd, Fe, Mg, Na, K, Ni, Pb and Se have higher values as compared to the permissible level of these elements in drinking water. The results were compared with WHO water quality guidelines as well as with literature values reported for global lake water.

  3. Standardized chemical synthesis of Pseudomonas aeruginosa pyocyanin

    Directory of Open Access Journals (Sweden)

    Rajkumar Cheluvappa

    2014-01-01

    As we have extracted pyocyanin both from P. aeruginosa cultures, and via chemical synthesis; we know the procedural and product-quality differences. We endorse the relative ease, safety, and convenience of using the chemical synthesis described here. Crucially, our “naturally endotoxin-free” pyocyanin can be extracted easily without using infectious bacteria.

  4. Program VODAM for treatment of mineral physico-chemical data, with a special application to the uranium case; Programa VODAM para tratamiento de datos de fisico-quimica mineral. Ejemplo de aplicacion al caso del uranio

    Energy Technology Data Exchange (ETDEWEB)

    Santoma Juncadella, L

    1972-07-01

    The VODAM program is written in FORTRAN IV language and makes a physico-chemical analysis of waters, for an element or a number of them, under investigation. A thermodynamical data files is incorporated, and is useful for a low temperature range. It is the basic nucleus for a series of programs of physico-chemical interpretation of hydrogeochemical data and automatic construction of equilibrium diagrams. (Author) 13 refs.

  5. Effect of gamma and electron beam irradiation on the physico-chemical and nutritional properties of mushrooms: a review.

    Science.gov (United States)

    Fernandes, Ângela; Antonio, Amilcar L; Oliveira, M Beatriz P P; Martins, Anabela; Ferreira, Isabel C F R

    2012-11-15

    The short shelf-life of mushrooms is an obstacle to the distribution and marketing of the fresh product. Thus, prolonging postharvest storage, while preserving their quality, would benefit the mushroom industry as well as consumers. There has been extensive research on finding the most appropriate technology for mushrooms preservation. Gamma, electron-beam and UV irradiation have been shown to be potential tools in extending the postharvest shelf-life of fresh mushrooms. Studies evaluating the effects of ionizing radiation are available mainly in cultivated species such as Agaricus bisporus, Lentinus edodes and Pleurotus ostreatus. This review comprises a comprehensive study of the effects of irradiation on physico-chemical parameters (weight, colour, texture and pH), chemical compounds including nutrients (proteins, sugars and vitamins) and non-nutrients (phenolics, flavonoids and flavour compounds), and on biochemical parameters such as enzymatic activity of mushrooms for different species and from different regions of the world. Copyright © 2012 Elsevier Ltd. All rights reserved.

  6. Effect of hydrocolloids on the physico-chemical and rheological properties of reconstituted sweetened yoghurt powder.

    Science.gov (United States)

    Seth, Dibyakanta; Mishra, Hari Niwas; Deka, Sankar Chandra

    2018-03-01

    The consistency of sweetened yoghurt (misti dahi) is a desired characteristic which is attributed to the casein protein network formation during fermentation. Unfortunately, this property is lost in reconstituted sweetened yoghurt (RSY) due to the irreversible nature of protein denaturation during spray drying. Therefore, this study aimed to increase the consistency of RSY using different hydrocolloids. The effects addition of guar gum, pectin, κ-carrageenan and gelatin (0.1%w/v each) on the physico-chemical, microbial, rheological and sensory properties of RSY were investigated. RSY with 40% total solids demonstrated the rheological properties which are very similar to those of fresh sweetened yoghurt. RSY containing different hydrocolloids further increased the rheological properties. The dynamic rheological study revealed that the magnitude of storage modulus (G'), loss modulus (G″), and loss tangent (tan δ) were significantly influenced by the addition of hydrocolloids and gelatin exhibited highest dynamic moduli in RSY. However, κ-carrageenan added RSY was preferred sensorially as the rheological properties were very close to gelatin added RSY. Addition of hydrocolloids significantly increased the starter bacteria count and pH and reduced water expulsion rate (P < 0.05). Addition of hydrocolloids can improve the rheological properties of reconstituted yoghurt. The study concluded that the addition of κ-carrageenan showed better results in terms of rheological and sensory properties of RSY. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  7. Characterization of physico-chemical properties of cervical mucus in relation to parity and conception rate in Murrah buffaloes

    Directory of Open Access Journals (Sweden)

    K. K. Verma

    2014-07-01

    Full Text Available Aim: To characterize the physico-chemical properties of estrual cervical mucus among different parities and analyse their association with conception rate in Murrah buffaloes. Materials and Methods: Cervical mucus was collected from the mid-cervix using sterile blue sheath before artificial insemination (AI in Murrah buffaloes (n=94 and examined for appearance (transparent/ translucent, consistency (thin/ moderate/ thick, Spinnbarkeit value, arborisation pattern (typical/ atypical/ nil, pH and electrical conductivity. Artificial insemination was carried out using frozen-thawed semen by recto-vaginal method and pregnancy was confirmed by per-rectal examination after 60 days of insemination. Furthermore, the conception rates were calculated and their relationship with physico-chemical properties of cervical mucus was studied. Results: Cervical mucus was clear and thin in 85.10% and 15.96 % of estrus periods, respectively. Typical arborisation pattern of cervical mucus was observed in 54.25% of the estruses. The Mean ± SEM of pH, electrical conductivity and Spinnbarkeit value of mucus were 7.82 ± 0.02, 14.00 ± 0.10 mS/cm and 14.18 ± 0.59 cm, respectively. Significantly (P< 0.05 higher conception rate (54.90% was observed in buffaloes inseminated with typical arborisation pattern of cervical mucus as compared to atypical arborisation pattern (20.00% and no conception was recorded in the estruses with nil arborisation pattern. Conclusion: The results of present investigation concluded that arborisation pattern has significant relationship with conception rate thus can be used as an important criteria to predict the right time of AI for improving conception rate in Murrah buffaloes.

  8. Contribution of thermodynamics in the understanding of the physico-chemical behaviour of fuels at high temperature

    International Nuclear Information System (INIS)

    Gueneau, C.; Chatain, S.; Gosse, S.; Dumas, J.C.; Defoort, F.

    2006-01-01

    The thermodynamic approach for studying the physico-chemical behaviour of nuclear fuels at high temperature is presented. For instance is shown how the thermodynamic study of the uranium-oxygen-zirconium-iron system has contributed to improve the understanding of the scenario considered in studies on serious accidents for PWR reactors. Concerning the fuels of the future high temperature reactors, has been developed a thermodynamic data base 'fuelbase' (U-Pu-O-C-N-Si-Zr-Ti-Mo-Cr) using the Calphad method in parallel with experimental studies. In the framework of the studies on high temperature reactors, experimental works on the study of the interaction between the uranium dioxide and graphite are presented. This interaction leads to the formation of gaseous CO and CO 2 which can potentially be prejudicial to the thermomechanical resistance of the fuel in reactor. In this framework, the thermodynamic properties of the uranium-oxygen-carbon system are studied. (O.M.)

  9. Tools for chemical synthesis in microsystems

    OpenAIRE

    Jensen, Klavs F.; Newman, Stephen G.; Reizman, Brandon Jacob

    2014-01-01

    Chemical synthesis in microsystems has evolved from simple proof-of-principle examples to become a general technique in academia and industry. Numerous such “flow chemistry” applications are now found in pharmaceutical and fine chemical synthesis. Much of the development has been based on systems employing macroscopic flow components and tubes, rather than the integrated chip technology envisioned by the lab-on-a-chip community. We review the major developments in systems for flow chemistry a...

  10. Differences in Health-related Fatty Acids, Intramuscular Fat and the Physico-chemical Quality in Mutton as Affected by Season, Place of Purchase and Meat Portion

    Directory of Open Access Journals (Sweden)

    Zikhona T. Rani

    2014-11-01

    Full Text Available The objective of the study was to determine the quality and fatty acid profiles of mutton cuts purchased from rural and urban localities in South Africa. Five hundred and ten samples were collected in four seasons from both rural and urban shops and butcheries. Samples were immediately transported to the laboratory in cooler boxes with ice where the following physico-chemical characteristics of mutton were determined; meat pH, color (L*, a*, and b*, cooking losses and Warner Braztler shear force and replicates stored at −20°C pending fatty acid analysis. Meat L* values were lowest (24.7±0.49 in winter and highest (32.2±0.49 in spring. The loin and sirloin cuts recorded the highest intramuscular fat whilst rib and leg cuts recorded the lowest intramuscular fat. In conclusion intramuscular fat, fatty acid profiles and physico-chemical quality of mutton were significantly affected by season and meat portion and not necessarily by the locality and class of shop.

  11. Externally predictive single-descriptor based QSPRs for physico-chemical properties of polychlorinated-naphthalenes: Exploring relationships of log SW, log KOA, and log KOW with electron-correlation

    International Nuclear Information System (INIS)

    Chayawan; Vikas

    2015-01-01

    Highlights: • Aqueous solubility and partition coefficient are modelled using single-parameter. • Electron-correlation observed as a vital predictorof physico-chemical properties. • For octanol-air partition coefficient, energy and polarizability yield best models. • Dipole-moment is found to be worst single-descriptor for the properties analysed. - Abstract: Quantitative structure–property relationships (QSPRs), based only on a single-parameter, are proposed for the prediction of physico-chemical properties, namely, aqueous solubility (log S W ), octanol–water partition coefficient (log K OW ) and octanol–air partition coefficient (log K OA ) of polychloronaphthalenes (PCNs) including all the 75 chloronaphthalene congeners. The QSPR models are developed using molecular descriptors computed through quantum mechanical methods including ab-initio as well as advanced semi-empirical methods. The predictivity of the developed models is tested through state-of-the-art external validation procedures employing an external prediction set of compounds. To analyse the role of instantaneous interactions between electrons (the electron-correlation), the models are also compared with those developed using only the electron-correlation contribution of the quantum chemical descriptor. The electron-correlation contribution towards the chemical hardness and the LUMO energy are observed to be the best predictors for octanol–water partition coefficient, whereas for the octanol–air partition coefficient, the total electronic energy and electron-correlation energy are found to be reliable descriptors, in fact, even better than the polarisability. For aqueous solubility of PCNs, the absolute electronegativity is observed to be the best predictor. This work suggests that the electron-correlation contribution of a quantum-chemical descriptor can be used as a reliable indicator for physico-chemical properties, particularly the partition coefficients

  12. Physico-chemical forms and migration in continental waters of radium from uranium mining and milling

    International Nuclear Information System (INIS)

    Benes, P.

    1982-01-01

    Recent advances in knowledge of the physico-chemical forms and migration of radium in continental waters are reviewed and recommendations for future research in this field are given. Computations of solution equilibria based on the reported and newly determined stability constants and solubilities of radium compounds show that a significant percentage of dissolved radium can exist in some waste and natural waters as an RaSO 4 ion pair, besides a significant percentage of Ra 2+ ions. The formation of a solid phase consisting mainly of sparingly soluble radium compounds can be excluded in waste and natural waters. Model experiments revealed that radium can be bound in complexes with some as yet unidentified ligands, probably of organic nature. Direct determinations of the physico-chemical forms of radium in surface and groundwaters were mostly confined to the analysis of the ratio of dissolved to particulate forms of radium. Ratios from 0.01 to 100 were found, depending on the type of water examined. Recently a newly suggested method of selective dissolution was applied to characterize the nature of particulate forms of radium in surface waters. Migration of radium is reviewed, covering the release of radium from its source, its transport in ground and surface waters and its deposition in various sinks. Factors influencing radium release from the sources into the hydrosphere are discussed. The following processes affecting radium migration are discussed: adsorption of dissolved radium on suspended solids and bottom sediments, coprecipitation of radium with solids formed in waste waters or in natural waters, sedimentation of particulate forms of radium in reservoirs and streams, resuspension of bottom sediments and dissolution of radium from suspended solids or bottom sediments

  13. Thermodynamic and physico-chemical fluctuations in hydrothermal systems suitable for the geological cradle of life

    Science.gov (United States)

    Kompanichenko, Vladimir

    Thermodynamic and physico-chemical fluctuations in the medium seem are the necessary factor for the origin of life. Fluctuations are usual phenomena in hydrothermal systems including their outcrops in ocean or terrestrial groundwater aquifers. Investigation of the fluctuations regimes in natural hydrothermal systems can be used in advanced laboratory experiments on prebiotic organic synthesis under changeable conditions. To characterize a scale of the thermodynamic and physic-chemical fluctuations four hydrothermal systems were explored: several terrestrial hydrothermal systems, primarily on the Russian Far East. Temperature of water and water-steam mixture (from boreholes) in Mutnovsky and Pauzhetsky hydrothermal fields (Kamchatka peninsula) ranges from less than 100 o C up to 240 o C. Water from Kuldur thermal basin (in-tracontinental part of the Russian Far East) is characterized with the lower temperature: 60-70 o C. Data of monitoring of pressure, temperature and some chemical parameters in the boreholes of these fields were mathematically processed. Periods of long-range macrofluctuations of pres-sure and temperature in Mutnovsky and Kuldur fields are 2-4.5 months, maximum amplitudes of temperature in the wells' orifices are 53o C and 9 o C correspondingly, maximum amplitude of pressure in Mutnovsky field 34 bars. Periods of minioscillations are from 10 to 70 minutes in Mutnovsky and Pauzhetsky fields, average amplitudes of pressure are 0.2-0.7 bars. These data are comparable with similar data from Mura basin in Slovenia: amplitudes of temperature and pH minioscillations are about 1-2o C and 0.2 correspondingly; there exists strict positive correlation of temperature with pH, K+, Na+, Ca2+, HCO3-, SO42-, Cl-, F-, but concentra-tions of Mg2+, NH4+, CO2 change independently (Kralj, 2000).. The general conclusion is that minifluctuations of thermodynamic and physic-chemical parameters in hydrothermal sys-tems are usual phenomenon. From time to time the

  14. Triacylglycerol composition, physico-chemical characteristics and oxidative stability of interesterified canola oil and fully hydrogenated cottonseed oil blends.

    Science.gov (United States)

    Imran, Muhammad; Nadeem, Muhammad

    2015-10-29

    fatty acids values of CaO:FHCSO blends decreased after interesterification and increased within the permissible limits during storage (p ≥ 0.05). The CaO:FHCSO blends maintained their sensory acceptability before and after interesterification which decreased significantly as storage length increased from days 30 to 60-days. Most important was the 50 % CaO:50 % FHCSO blend (T2) which possessed the desirable TAG profile, physico-chemical and sensory characteristics coming from T1 and T3. The present study concludes that functional lipids with desirable characteristics can be developed through interesterification of 50 % CaO:50 % FHCSO blend and should be explored as ingredient for the production of various healthier products for discerning consumers.

  15. Protein chemical synthesis by α-ketoacid-hydroxylamine ligation.

    Science.gov (United States)

    Harmand, Thibault J; Murar, Claudia E; Bode, Jeffrey W

    2016-06-01

    Total chemical synthesis of proteins allows researchers to custom design proteins without the complex molecular biology that is required to insert non-natural amino acids or the biocontamination that arises from methods relying on overexpression in cells. We describe a detailed procedure for the chemical synthesis of proteins with the α-ketoacid-hydroxylamine (KAHA ligation), using (S)-5-oxaproline (Opr) as a key building block. This protocol comprises two main parts: (i) the synthesis of peptide fragments by standard fluorenylmethoxycarbonyl (Fmoc) chemistry and (ii) the KAHA ligation between fragments containing Opr and a C-terminal peptide α-ketoacid. This procedure provides an alternative to native chemical ligation (NCL) that could be valuable for the synthesis of proteins, particularly targets that do not contain cysteine residues. The ligation conditions-acidic DMSO/H2O or N-methyl-2-pyrrolidinone (NMP)/H2O-are ideally suited for solubilizing peptide segments, including many hydrophobic examples. The utility and efficiency of the protocol is demonstrated by the total chemical synthesis of the mature betatrophin (also called ANGPTL8), a 177-residue protein that contains no cysteine residues. With this protocol, the total synthesis of the betatrophin protein has been achieved in around 35 working days on a multimilligram scale.

  16. Effect of UHT processing and storage conditions on physico-chemical characteristics of buffalo skim milk

    International Nuclear Information System (INIS)

    Hussain, I.

    2011-01-01

    The obtained results indicated that physico-chemical and nutritional changes in UHT processed buffalo skimmed milk were more pronounced at 45 deg. C than 25 deg. C and 10 deg. C. Duration of storage adversely affected the chemical and nutritional quality of processed milk. A slight decrease in pH, total ash and lactose contents, was observed, whereas acidity was increased on the mentioned storage conditions. Total nitrogen and casein nitrogen contents gradually decreased during storage, whereas non-casein nitrogen (NCN) and non-protein nitrogen (NPN) increased to a great extent in samples stored at higher temperatures. A significant increase in hydroxyl methyl furfural (HMF) values occurred in UHT processed buffalo skim milk at 25 deg. C and 45 deg. C after of 90 days storage. Storage at high temperature (45 deg. C) caused undesirable effects on sensory properties, general quality characteristics and acceptability of UHT buffalo skimmed milk. (author)

  17. In vitro Starch Hydrolysis Rate, Physico-chemical Properties and Sensory Evaluation of Butter Cake Prepared Using Resistant Starch Type III Substituted for Wheat Flour.

    Science.gov (United States)

    Pongjanta, J; Utaipattanaceep, A; Naivikul, O; Piyachomkwan, K

    2008-09-01

    Resistant starch type III (RS III) derived from enzymatically debranched high amylose rice starch was prepared and used to make butter cake at different levels (0, 5, 10, 15 and 20%) in place of wheat flour. Physico-chemical properties, sensory evaluation, and in vitro starch hydrolysis rate of the developed butter cake were investigated. This study showed that the content of resistant starch in butter cake increased significantly (Pcake with RS III replacement had a significantly lower in vitro starch hydrolysis rate compared to the control cake (0% RS III). The rates of starch hydrolysis from 0 to 180 min digestion time for 0, 5, 10 15, and 20% RS III in place of wheat flour in butter cakes were 3.70 to 67.65%, 2.97 to 64.86%, 2.86 to 59.99%, 2.79 to 55.96 and 2.78 to 53.04% respectively. The physico-chemical properties of 5 to 10% RS III substituted with wheat flour in the butter cake were not significantly different from the control cake and were moderately accepted by panellists in the sensory evaluation test.

  18. Mechanical, physico-chemical, and antimicrobial properties of gelatin-based film incorporated with catechin-lysozyme

    Directory of Open Access Journals (Sweden)

    Rawdkuen Saroat

    2012-11-01

    Full Text Available Abstract Background Microbial activity is a primary cause of deterioration in many foods and is often responsible for reduced quality and safety. Food-borne illnesses associated with E. coli O157:H7, S. aureus, S. enteritidis and L. monocytogenes are a major public health concern throughout the world. A number of methods have been employed to control or prevent the growth of these microorganisms in food. Antimicrobial packaging is one of the most promising active packaging systems for effectively retarding the growth of food spoilage and pathogenic microorganisms. The aim of this study was to determine the mechanical, physico-chemical properties and inhibitory effects of the fish gelatin films against selected food spoilage microorganisms when incorporated with catechin-lysozyme. Results The effect of the catechin-lysozyme combination addition (CLC: 0, 0.125, 0.25, and 0.5%, w/v on fish gelatin film properties was monitored. At the level of 0.5% addition, the CLC showed the greatest elongation at break (EAB at 143.17% with 0.039 mm thickness, and the lowest water vapor permeability (WVP at 6.5 x 10−8 g·mm·h-1·cm-2·Pa-1, whereas the control showed high tensile strength (TS and the highest WVP. Regarding color attributes, the gelatin film without CLC addition gave the highest lightness (L* 91.95 but lowest in redness (a*-1.29 and yellowness (b* 2.25 values. The light transmission of the film did not significantly decrease and nor did film transparency (p>0.05 with increased CLC. Incorporating CLC could not affect the film microstructure. The solubility of the gelatin based film incorporated with CLC was not affected, especially at a high level of addition (p>0.05. Inhibitory activity of the fish gelatin film against E.coli, S.aureus, L. innocua and S. cerevisiae was concentration dependent. Conclusions These findings suggested that CLC incorporation can improve mechanical, physico-chemical, and antimicrobial properties of the resulting films

  19. Pyro-synthesis of functional nanocrystals.

    Science.gov (United States)

    Gim, Jihyeon; Mathew, Vinod; Lim, Jinsub; Song, Jinju; Baek, Sora; Kang, Jungwon; Ahn, Docheon; Song, Sun-Ju; Yoon, Hyeonseok; Kim, Jaekook

    2012-01-01

    Despite nanomaterials with unique properties playing a vital role in scientific and technological advancements of various fields including chemical and electrochemical applications, the scope for exploration of nano-scale applications is still wide open. The intimate correlation between material properties and synthesis in combination with the urgency to enhance the empirical understanding of nanomaterials demand the evolution of new strategies to promising materials. Herein we introduce a rapid pyro-synthesis that produces highly crystalline functional nanomaterials under reaction times of a few seconds in open-air conditions. The versatile technique may facilitate the development of a variety of nanomaterials and, in particular, carbon-coated metal phosphates with appreciable physico-chemical properties benefiting energy storage applications. The present strategy may present opportunities to develop "design rules" not only to produce nanomaterials for various applications but also to realize cost-effective and simple nanomaterial production beyond lab-scale limitations.

  20. Physico-chemical studies of radiation effects in cells: Final report

    International Nuclear Information System (INIS)

    Powers, E.L.

    1987-03-01

    The career of Dr. E.L. Powers, a pioneer in the development of radiobiology, is reviewed. His initial research involved the effects of radiation and certain chemicals on Paramecium, associated ultrastructural studies on protozoan cells, responses of Rickettsia and bacteriophage to irradiation, and the development of techniques for studying bacterial spores. These efforts established the basic radiation biology of the spore and its importance in understanding the effects of free radicals, oxygen, and water. His recent research extended work on the dry spore to the very wet spore and to other selected chemical systems in aqueous suspension. 126 refs., 2 figs

  1. Suitability of E-tongue Sensors to Assess Taste-Masking of Pediatric Liquids by Different Beverages Considering Their Physico-chemical Properties.

    Science.gov (United States)

    Immohr, Laura Isabell; Hedfeld, Claas; Lang, Artur; Pein-Hackelbusch, Miriam

    2017-02-01

    Manipulation of liquid oral drugs by mixing them into foodstuff is a common procedure for taste-masking of OTC pharmaceuticals when administered to children. However, the taste-masking capability of such application media is not systematically evaluated, and recommendations for suitable media are hardly published. In this study, a sensor array of commercially available and self-developed electronic tongue sensors was employed to assess the taste-masking efficiency of eight different beverages (tap water, apple juice, carrot juice, fennel tea, fruit tea, milk, cocoa, and Alete meal to drink) on the OTC pharmaceuticals Ambroxol-ratiopharm®, Cetirizin AL, and Laxoberal® by multivariate data analysis. The Euclidean distances between each pure application medium and its corresponding drug mixture were used as an indicator for the taste-masking efficiency and correlated to the physico-chemical properties of the beverages. Thus, the pH value, the viscosity, as well as the fat and sugar content of the beverages were included, whereas only the viscosity appeared to be insignificant in all cases. The sugar content as well as the fat content and pH value emerged to be a significant variable in taste-masking efficiency for some of the tested drug products. It was shown that the applied electronic tongue sensors were capable to demonstrate the impact of the physico-chemical properties of the application media on their taste-masking capacity regardless of their non-selectivity towards these characteristics.

  2. The physico-chemical problems involved in condenser cooling, circuit sealing and stain

    International Nuclear Information System (INIS)

    Ropars, Jean.

    1975-01-01

    Today thermal production of electric energy requiers the use of steam turbines and then needs cold sources (condensers), the latter being obtained by means of a water circulation. Considerable amounts of water are involved. For instance, as for a 900MW power plant of the PWR type, a 12 deg C heating needs 40m 3 /s of cooling water. The needs in water introduce a limitation in the possible site selection for power plant settling (seaside or river with an important steady flow). The important amounts of heat involved create environmental problems. Means for limiting the heat amount released consist in using atmospheric cooling systems. A further constraint relating to scaling is added to the usual corrosion and stain problems when operating the devices. Changes in the carbon dioxide equilibrium and concentration due to the passage through the air cooling systems causes such scaling formation. The evolution of the physico-chemical parameters of the cooling water is described with the risks resulting for the circuits. Means to be developed for preventing scaling, stain and corrosion are presented. The solutions kept by E.D.F. for the exploitation of cooling circuits are indicated. The procedure developed must avoid any chemical pollution of water wastes [fr

  3. Study of physico-chemical release of uranium and plutonium oxides during the combustion of polycarbonate and of ruthenium during the combustion of solvents used in the reprocessing of nuclear fuel; Etude de la mise en suspension physico-chimique des oxydes de plutonium et d'uranium lors de la combustion de polycarbonate et de ruthenium lors de la combustion des solvants de retraitement du combustible irradie

    Energy Technology Data Exchange (ETDEWEB)

    Bouilloux, L

    1998-07-01

    The level of consequences concerning a fire in a nuclear facility is in part estimated by the quantities and the physico-chemical forms of radioactive compounds that may be emitted out of the facility. It is therefore necessary to study the contaminant release from the fire. Because of the multiplicity of the scenarios, two research subjects were retained. The first one concerns the study of the uranium or plutonium oxides chemical release during the combustion of the polycarbonate glove box sides. The second one is about the physico chemical characterisation of the ruthenium release during the combustion of an organic solvent mixture (tributyl phosphate-dodecane) used for the nuclear fuel reprocessing. Concerning the two research subjects, the chemical release, i.e. means the generation of contaminant compounds gaseous in the fire, was modelled using thermodynamical simulations. Experiments were done in order to determine the ruthenium release factor during solvent combustion. A cone calorimeter was used for small scale experiments. These results were then validated by large scale tests under conditions close to the industrial process. Thermodynamical simulations, for the two scenarios studied. Furthermore, the experiments on solvent combustion allowed the determination of a suitable ruthenium release factor. Finally, the mechanism responsible of the ruthenium release has been found. (author)

  4. The influence of the physico-chemical form of the aerosol on the radiological consequences of notional accidental releases of radioactivity from a fast breeder reactor

    International Nuclear Information System (INIS)

    Kelly, G.N.; Jones, J.A.; Simmonds, J.R.

    1979-01-01

    The radiological consequences of a wide range of notional accidental releases from a 1300 MW(e) LMFBR (Liquid Metal-cooled Fast Breeder Reactor) were assessed in a study published by the National Radiological Protection Board (NRPB) in 1977. In that study representative values were in general adopted for each of the important parameters while recognising that in reality they could vary considerably. The present study is concerned with the sensitivity of the predicted consequences to the physico-chemical form of the released aerosol. Of particular interest is the importance of a mixed sodium-transuranium element aerosol which may be formed in accidental releases of activity from sodium cooled FBRs. Two significant findings emerge from the study. First the predicted consequences in general are relatively insensitive to the range of physico-chemical forms analysed. For generic assessments therefore it is sufficient to assume the properties of the aerosol adopted in the initial study (1 μm AMAD and each element in the oxide form); the exception concerns the estimation of the incidence of early morbidity, and to a lesser extent early mortality, but only for a limited range of release composition. The second finding is that the radiological consequences are not, contrary to what might have been expected, significantly increased for the release of a mixed sodium-element aerosol

  5. Physico-chemical properties of Pd nanoparticles produced by Pulsed Laser Ablation in different organic solvents

    International Nuclear Information System (INIS)

    Cristoforetti, Gabriele; Pitzalis, Emanuela; Spiniello, Roberto; Ishak, Randa; Giammanco, Francesco; Muniz-Miranda, Maurizio; Caporali, Stefano

    2012-01-01

    Palladium nanoparticles are arousing an increasing interest because of their strong activity in heterogeneous catalysis in a wide range of reactions. Driven by the interest of producing Pd nanoparticles to be deposited for catalysis over hydrophobic supports, we investigated their synthesis via Pulsed Laser Ablation in Liquid in several organic solvents, as acetone, ethanol, 2-propanol, toluene, n-hexane. The colloids were produced by using a Nd:YAG ns laser and without the addition of surfactant agents. The morphology, composition, stability and oxidation state of the obtained nanoparticles were investigated by TEM-EDS analysis, UV-vis spectroscopy, X-ray Photoelectron Spectroscopy and micro-Raman spectroscopy. The results evidence that the nature of the solvent influences both the yield and the physico-chemical properties of the produced nanoparticles. While in acetone and alcohols spheroidal, non aggregated and stable particles are obtained, in case of toluene and n-hexane few unstable particles surrounded by a gel-like material are produced. Raman/XPS measurements suggest the presence of amorphous or graphitic carbon onto crystalline Pd nanoparticles, which could have hindered their growth and determined the observed smaller sizes if compared to nanoparticles produced in water. The stability of Pd colloids obtained in acetone and alcohols was attributed to adsorbed anions like enolates or alcoholates; non polar solvents like toluene and n-hexane, unable to give rise to adsorbed anionic species, cannot provide any stabilization to the palladium nanoparticles. XPS analyses also evidenced a partial oxidation of particles surface, with a ratio Pd 2+ :Pd 0 of 1:2.5 and 1:4 in acetone and ethanol, respectively.

  6. Physico-Chemical studies on irradiated polymer-reinforcement cement mortar composites

    International Nuclear Information System (INIS)

    Younes, M.M.

    2001-01-01

    The reinforced concrete suffers from corrosion by several salts, acids or alkalies and physico-mechanical properties are greatly affected. This leads to reduce the life of reinforced concrete structure. The present investigation deals with a comparison of corrosion presentation efficiency and passivity retention of reinforcement steel coated with methylethyl and propyl inhibitors which are prepared by using γ radiation and non-coated steel embedded in γ -induced polyester cement mortar composites. From the results of these studies several conclusions could be derived and these are summarized as follows: 1- The time required to reach passivation for coated steel embedded in the mortar after soaking in tap water for 28 days lies within the range 5-15 minutes; whereas, the time required to reach passivation for steel embedded in the polyester cement mortar composites is very short (1 minute). This result is related to the presence of copolymerized polyester in the pore system of the specimens. 2- The time required to reach passivation for steel coated by inhibitors in the mortar specimens after curing in tap water for 6 months is lower than that of non -coated steel embedded in the mortar specimens cured at the same conditions. 3- A relatively high degree of corrosion inhibition was obtained for the steel embedded in polyester-cement mortar composites after curing in sea water for 28 days, the time required to reach passivation is considered as moderate in the case of methyl and ethyl inhibitors the time to passivation (T.T.P.) = 9 minutes and the degree of inhibition of steel coated with the propyl inhibitor is comparatively low (T.T.P.=21 minutes)

  7. Investigation of Physico-Chemical Properties of Sand-Lime Products Modified of Diabase Aggregate and Chalcedonite Meal

    Science.gov (United States)

    Dachowski, Ryszard; Komisarczyk, Katarzyna

    2017-10-01

    In the era of rapid development in the construction industry, particular attention is focused on harmless and natural materials. Some of the best materials for building masonry walls are sand-lime products. Silicates are obtained from a mixture of quartz, sand and a small amount of water. They emerge as a result of the hydrothermal treatment conducted under high pressure and at a temperature of app. 203 °C. Silicates were modified of different kinds of aggregates, glass or plastics, and the content of dry ingredients was changed because of this fact. The paper describes the studies where the combination of diabase aggregate and chalcedonite meal was used. Microstructure of the products was analyzed with the use of mercury intrusion porosimetry, SEM and XRD methods. Variable content of chalcedonite meal changes the internal structure and the physico-chemical properties.

  8. Alkali roasting of bomar ilmenite: rare earths recovery and physico-chemical changes

    Directory of Open Access Journals (Sweden)

    Sanchez-Segado Sergio

    2014-11-01

    (FeTiO3 is presented as a process route for integrated beneficiation of the mineral for rutile-rich phase and rare earth oxides; the latter is released as a consequence of physical changes in the ilmenite matrix, during the water leaching after roasting. The oxidative alkali roasting transforms ilmenite mineral into water-insoluble alkali titanate and water-soluble ferrite. After roasting the insoluble alkali titanate is separated from rare-earth oxide mixture in colloidal form and water-soluble ferrite. Further leaching of alkali titanate is carried out with oxalic (0.3M and ascorbic (0.01M acid solution which removes the remaining Fe2+ ions into the leachate and allows precipitation of high-purity synthetic rutile containing more than 95% TiO2. Iron is removed as iron oxalate. The physico-chemical changes occurred during the roasting and leaching processes are reported by comparing the role of alkali on the roasting process and product morphologies formed.

  9. Physico-chemical characterization of terbium-161-chloride (161TbCl3) radioisotope from irradiated natural gadolinium oxide target

    International Nuclear Information System (INIS)

    Azmairit Aziz; Nana Suherman

    2015-01-01

    Currently cancer patients are increasing every year in Indonesia and become the third leading cause of death after heart disease and high blood pressure. Terbium-161 ( 161 Tb) is a low β- emitter (E β - = 0.155 MeV, T 1/2 = 6.9 d) and very similar to 177 Lu in terms of half-life, E β - energy and chemical properties.However, 161 Tb also ejects internal conversion electrons and Auger electrons which can provide a greater therapeutic effect than 177 Lu. Radioisotope of 161 Tb can be produced as a carrier-free for use in labeling of biomolecules as a targeted radiopharmaceutical for cancer therapy. 161 Tb was obtained through 160 Gd(n,γ) 161 Tb nuclear reaction by thermal neutron bombardment on 100 mg of natural gadolinium oxide target in RSG-G.A. Siwabessy at a thermal neutron flux of ~10 14 n.cm -2 .s -1 and followed by radiochemical separation of 161 Tb from Gd isotopes using extraction chromatography method. The physico-chemical characterization of 161 TbCl 3 solution was studied by determination of its radionuclide purity by means of a γ-rays spectrometry with HP-Ge detector coupled to a multichannel analyzer (MCA). Radiochemical purity was determined using paper chromatography and paper electrophoresis methods. The results showed that 161 TbCl 3 radioisotope has a pH of 2, radiochemical purity of 99.64 ± 0.34%, radionuclide purity of 99.69 ± 0.20%, specific activity and radioactive concentration at the end of irradiation (EOI) of 2.26 – 5.31 Ci/mg and 3.84 – 9.03 mCi/mL, respectively. 161 TbCl 3 solution stable for 3 weeks at room temperature with a radiochemical purity of 98.41 ± 0.42%. 161 TbCl 3 solution from irradiated natural gadolinium oxide target has the physico-chemical characteristic that meets the requirements for use as a precursor in preparation of radiopharmaceuticals. (author)

  10. Oxidative Stability and Physico-chemical Properties of Meat from Broilers Fed with Dietary Neem Leaf Powder, Spirulina and their Combination

    Directory of Open Access Journals (Sweden)

    Ravi KILLI

    2015-12-01

    Full Text Available This 6 week study was conducted to evaluate the antioxidant potential, maintaining quality and sensory properties of broiler meat from birds fed on dietary neem leaf powder (NLP. A total of 90 Vencobb broiler chicks were randomly allotted to 6 groups of 15 birds in each. Dietary treatments consisted of normal diet (control Group I, feed containing terramycin-200 (TM-200* at the concentration of 0.05% (Group II, feed containing NLP of 0.2% (Group III, feed containing NLP of 0.2% and spirulina of 1% (Group IV, feed containing TM-200 at 0.05% and spirulina of 1% (Group V and feed containing spirulina of 1% (Group VI. At the end of the experiment liver, kidney and muscle samples were collected to evaluate the tissue peroxidation (TBARS and protein carbonyls and antioxidant markers (SOD. Physico-chemical quality determinants of both fresh and preserved meat viz. extract release volume (ERV, water holding capacity (WHC and pH were also studied. TBARS protein carbonyls indicated a significant (P < 0.05 decrease in all the treated groups when compared to control. Superoxide dismutase levels were found to be significantly increased in all the treated groups, in all the tissues collected. Compared to control group, favorable physico-chemical quality determinants were recorded in all the treated groups. The sensory attributes did not show significant (P < 0.05 differences for color, flavor, juiciness, tenderness and overall acceptability. This study indicates enhanced stress tolerance levels, improved meat quality with unaffected consumer acceptance levels of the meat observed in the study, from broilers fed with neem and spirulina either alone or in combinationsș this points out that neem at 0.2% level can be used in poultry diets instead of antibiotic growth promoters (AGP.

  11. Synthesis and Physico-chemical studies of a new non ...

    Indian Academy of Sciences (India)

    infrared spectrum has been interpreted on the basis of literature data. Solid state 13C CP-MAS-NMR spectrum is in agreement with the X-ray structure. Keywords. Hybrid material; X-ray diffraction; hydrogen bonds; infrared spectroscopy; NMR spectroscopy. 1. Introduction. For the past three decades, the fields of fibre elec-.

  12. Oxaprozin: Synthesis, SAR study, physico-chemical characteristics and pharmacology

    Directory of Open Access Journals (Sweden)

    Božić Bojan Đ.

    2011-01-01

    Full Text Available Oxaprozin (3-(4,5-difeniloksazol-2-ylpropanoic acid is a nonsteroidal anti-inflammatory drug (NSAID used in the treatment of numerous inflammatory musculoskeletal diseases, including rheumatoid arthritis, osteoarthritis, tendonitis, ankylosing spondylitis and bursitis. It is the first representative member of the diaryl-substituted heterocyclic compounds, which have found clinical use as selective cyclooxygenase-2 (COX-2 inhibitors. U.S. Food and Drug Administration (FDA approved its official use in 1992. Both anti-inflammatory and analgesic properties of oxaprozin are mainly due to the potent inhibition of COX. However, oxaprozin-induced benefits might be also regulated by other COX-independent pathways. It has been shown that oxaprozin induced direct proapoptotic effects in CD40L-treated human monocytes independently of COX inhibition. It also has several advantages in the treatment of inflammatory diseases in comparison to other NSAIDs such as aspirin, naproxen, indomethacin and phenylbutazone, which enabled oxaprozin to become one of the most used NSAIDs in America. Oxaprozin, as other members of the group of NSAIDs, can cause gastrointestinal complications, but significantly lower due to relatively high pKa value. In this paper, importance of oxaprozin in the treatment of arthritis and its pharmacokinetic properties were described, therewith its activity and side effects were compared with other commercially available anti-inflammatory drugs.

  13. Chemical protein synthesis: Inventing synthetic methods to decipher how proteins work.

    Science.gov (United States)

    Kent, Stephen

    2017-09-15

    Total chemical synthesis of proteins has been rendered practical by the chemical ligation principle: chemoselective condensation of unprotected peptide segments equipped with unique, mutually reactive functional groups, enabled by formation of a non-native replacement for the peptide bond. Ligation chemistries are briefly described, including native chemical ligation - thioester-mediated, amide-forming reaction at Xaa-Cys sites - and its extensions. Case studies from the author's own works are used to illustrate the utility and applications of chemical protein synthesis. Selected recent developments in the field are briefly discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Organic Contaminant Content and Physico-Chemical Characteristics of Waste Materials Recycled in Agriculture

    Directory of Open Access Journals (Sweden)

    Hannah Rigby

    2015-12-01

    Full Text Available A range of wastes representative of materials currently applied, or with future potential to be applied, to agricultural land in the UK as fertilisers and soil improvers or used as animal bedding in livestock production, were investigated. In addition to full physico-chemical characterization, the materials were analysed for a suite of priority organic contaminants. In general, contaminants were present at relatively low concentrations. For example, for biosolids and compost-like-output (CLO, concentrations of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs and polychlorinated biphenyls (PCBs were approximately 1−10 and 5–50 times lower, respectively, than various proposed or implemented European limit values for these contaminants in biosolids or composts applied to agricultural land. However, the technical basis for these limits may require re-evaluation in some cases. Polybrominated, and mixed halogenated, dibenzo-p-dioxins/dibenzofurans are not currently considered in risk assessments of dioxins and dioxin-like chemicals, but were detected at relatively high concentrations compared with PCDD/Fs in the biosolids and CLOs and their potential contribution to the overall toxic equivalency is assessed. Other ‘emerging’ contaminants, such as organophosphate flame retardants, were detected in several of the waste materials, and their potential significance is discussed. The study is part of a wider research programme that will provide evidence that is expected to improve confidence in the use of waste-derived materials in agriculture and to establish guidelines to protect the food chain where necessary.

  15. PHYSICO-CHEMICAL PROPERTIES OF THE SOLID AND LIQUID WASTE PRODUCTS FROM THE HEAVY METAL CONTAMINATED ENERGY CROPS GASIFICATION PROCESS

    Directory of Open Access Journals (Sweden)

    Sebastian Werle

    2017-02-01

    Full Text Available The paper presents the results of basic physico-chemical properties of solid (ash and liquid (tar waste products of the gasification process of the heavy metal contaminated energy crops. The gasification process has carried out in a laboratory fixed bed reactor. Three types of energy crops: Miscanthus x giganteus, Sida hermaphrodita and Spartina Pectinata were used. The experimental plots were established on heavy metal contaminated arable land located in Bytom (southern part of Poland, Silesian Voivodship.

  16. Physico-chemical characteristics and methanogen communities in swine and dairy manure storage tanks: spatio-temporal variations and impact on methanogenic activity.

    Science.gov (United States)

    Barret, Maialen; Gagnon, Nathalie; Topp, Edward; Masse, Lucie; Massé, Daniel I; Talbot, Guylaine

    2013-02-01

    Greenhouse gas emissions represent a major environmental problem associated with the management of manure from the livestock industry. Methane is the primary GHG emitted during manure outdoor storage. In this paper, the variability of two swine and two dairy manure storage tanks was surveyed, in terms of physico-chemical and microbiological parameters. The impact of the inter-tank and spatio-temporal variations of these parameters on the methanogenic activity of manure was ascertained. A Partial Least Square regression was carried out, which demonstrated that physico-chemical as well as microbiological parameters had a major influence on the methanogenic activity. Among the 19 parameters included in the regression, the concentrations of VFAs had the strongest negative influence on the methane emission rate of manure, resulting from their well-known inhibitory effect. The relative abundance of two amplicons in archaeal fingerprints was found to positively influence the methanogenic activity, suggesting that Methanoculleus spp. and possibly Methanosarcina spp. are major contributors to methanogenesis in storage tanks. This work gave insights into the mechanisms, which drive methanogenesis in swine and dairy manure storage tanks. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

  17. Chemical Reduction Synthesis of Iron Aluminum Powders

    Science.gov (United States)

    Zurita-Méndez, N. N.; la Torre, G. Carbajal-De; Ballesteros-Almanza, L.; Villagómez-Galindo, M.; Sánchez-Castillo, A.; Espinosa-Medina, M. A.

    In this study, a chemical reduction synthesis method of iron aluminum (FeAl) nano-dimensional intermetallic powders is described. The process has two stages: a salt reduction and solvent evaporation by a heat treatment at 1100°C. The precursors of the synthesis are ferric chloride, aluminum foil chips, a mix of Toluene/THF in a 75/25 volume relationship, and concentrated hydrochloric acid as initiator of the reaction. The reaction time was 20 days, the product obtained was dried at 60 °C for 2 h and calcined at 400, 800, and 1100 °C for 4 h each. To characterize and confirm the obtained synthesis products, X-Ray Diffraction (XRD), and Scanning Electron Microscopy (SEM) techniques were used. The results of morphology and chemical characterization of nano-dimensional powders obtained showed a formation of agglomerated particles of a size range of approximately 150 nm to 1.0 μm. Composition of powders was identified as corundum (Al2O3), iron aluminide (FeAl3), and iron-aluminum oxides (Fe0. 53Al0. 47)2O3 phases. The oxide phases formation were associated with the reaction of atmospheric concentration-free oxygen during synthesis and sintering steps, reducing the concentration of the iron aluminum phase.

  18. Physico-chemical properties and biological effects of diesel and biomass particles

    KAUST Repository

    Longhin, Eleonora

    2016-05-15

    © 2016 Elsevier Ltd. Diesel combustion and solid biomass burning are the major sources of ultrafine particles (UFP) in urbanized areas. Cardiovascular and pulmonary diseases, including lung cancer, are possible outcomes of combustion particles exposure, but differences in particles properties seem to influence their biological effects.Here the physico-chemical properties and biological effects of diesel and biomass particles, produced under controlled laboratory conditions, have been characterized. Diesel UFP were sampled from a Euro 4 light duty vehicle without DPF fuelled by commercial diesel and run over a chassis dyno. Biomass UFP were collected from a modern automatic 25 kW boiler propelled by prime quality spruce pellet. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) images of both diesel and biomass samples showed aggregates of soot particles, but in biomass samples ash particles were also present. Chemical characterization showed that metals and PAHs total content was higher in diesel samples compared to biomass ones.Human bronchial epithelial (HBEC3) cells were exposed to particles for up to 2 weeks. Changes in the expression of genes involved in xenobiotic metabolism were observed after exposure to both UFP already after 24 h. However, only diesel particles modulated the expression of genes involved in inflammation, oxidative stress and epithelial-to-mesenchymal transition (EMT), increased the release of inflammatory mediators and caused phenotypical alterations, mostly after two weeks of exposure.These results show that diesel UFP affected cellular processes involved in lung and cardiovascular diseases and cancer. Biomass particles exerted low biological activity compared to diesel UFP. This evidence emphasizes that the study of different emission sources contribution to ambient PM toxicity may have a fundamental role in the development of more effective strategies for air quality improvement.

  19. Influence of Ni content on physico-chemical characteristics of Ni, Mg, Al-Hydrotalcite like compounds

    Directory of Open Access Journals (Sweden)

    Alexandre Carlos Camacho Rodrigues

    2003-12-01

    Full Text Available The physico-chemical properties of a series of Ni,Mg,Al-HTLC with Al/(Al+Mg+Ni = 0.25 and low Ni/Mg ratios were studied by means of X-ray diffraction (XRD, thermogravimetric (TGA and thermodifferential (DTA analysis, N2 physissorption and temperature programmed reduction (TPR. The as-synthesized materials were well-crystallized, with XRD patterns typical of the HTLCs in carbonate form. Upon calcination and dehydration the dehydroxilation of the layers with concurrent decomposition of carbonate anions produced mixed oxides with high surface area. XRD analysis indicated that the different nickel and aluminum oxides species are well-dispersed in a poor-crystallized MgO periclase-type phase. As observed by TPR, the different Ni species showed distinct interactions with Mg(AlO phase, which were influenced by both nickel content and calcination temperature. Regardless of the the nickel content, the reduction of nickel species was not complete as indicated by the presence of metallic dispersions.

  20. Chemical products and industrial materials

    International Nuclear Information System (INIS)

    1995-12-01

    A compilation of all universities, industrial and governmental agencies in Quebec which are actively involved in research and development of chemical products and industrial materials derived from biomass products, was presented. Each entry presented in a standard format that included a description of the major research activities of the university or agency, the principal technologies used in the research, available research and analytical equipment, a description of the research personnel, names, and addresses of contact persons for the agency or university. Thirty entries were presented. These covered a wide diversity of activities including biotechnological research such as genetic manipulations, bioconversion, fermentation, enzymatic hydrolysis and physico-chemical applications such as bleaching, de-inking, purification and synthesis. tabs

  1. Physico-chemical properties, rheology and degree of esterification of passion fruit (Passiflora edulis f. flavicarpa) peel flour.

    Science.gov (United States)

    Coelho, Emanuela M; de Azevêdo, Luciana C; Viana, Arão C; Ramos, Ingrid G; Gomes, Raquel G; Lima, Marcos Dos S; Umsza-Guez, Marcelo A

    2018-01-01

    The peel of yellow passion fruit is as an agro-industrial waste of great environmental impact, representing more than 50% of the total weight of the fruit. For this reason, and also considering its importance as a source of functional components such as pectin, this organic waste is increasingly attracting the attention of researchers. The aim of this study was to investigate the physico-chemical composition and physical properties of this material, which may be of interest to the food industry. We obtained two samples of passion fruit peel flour applying different processes: flour without treatment (FWOT) and flour with treatment by maceration (FWT). It was found that the flour samples contain, respectively, 372.4 g kg -1 and 246.7 kg -1 of soluble fiber and, according to the FTIR analysis, this material corresponds to high and low methoxyl pectins, respectively. The flour obtained by maceration (FWT) offers greater benefits for industrial use, with 60% fewer tannins and greater thermal stability. In addition, this sample does not reabsorb moisture as easily, although FWOT also shows potential for use in dietary products. Considering the pseudoplastic properties of the flours, the application of both samples could be expanded to many industrial sectors. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  2. Wetlands in changed landscapes: the influence of habitat transformation on the physico-chemistry of temporary depression wetlands.

    Science.gov (United States)

    Bird, Matthew S; Day, Jenny A

    2014-01-01

    Temporary wetlands dominate the wet season landscape of temperate, semi-arid and arid regions, yet, other than their direct loss to development and agriculture, little information exists on how remaining wetlands have been altered by anthropogenic conversion of surrounding landscapes. This study investigates relationships between the extent and type of habitat transformation around temporary wetlands and their water column physico-chemical characteristics. A set of 90 isolated depression wetlands (seasonally inundated) occurring on coastal plains of the south-western Cape mediterranean-climate region of South Africa was sampled during the winter/spring wet season of 2007. Wetlands were sampled across habitat transformation gradients according to the areal cover of agriculture, urban development and alien invasive vegetation within 100 and 500 m radii of each wetland edge. We hypothesized that the principal drivers of physico-chemical conditions in these wetlands (e.g. soil properties, basin morphology) are altered by habitat transformation. Multivariate multiple regression analyses (distance-based Redundancy Analysis) indicated significant associations between wetland physico-chemistry and habitat transformation (overall transformation within 100 and 500 m, alien vegetation cover within 100 and 500 m, urban cover within 100 m); although for significant regressions the amount of variation explained was very low (range: ∼2 to ∼5.5%), relative to that explained by purely spatio-temporal factors (range: ∼35.5 to ∼43%). The nature of the relationships between each type of transformation in the landscape and individual physico-chemical variables in wetlands were further explored with univariate multiple regressions. Results suggest that conservation of relatively narrow (∼100 m) buffer strips around temporary wetlands is likely to be effective in the maintenance of natural conditions in terms of physico-chemical water quality.

  3. Wetlands in changed landscapes: the influence of habitat transformation on the physico-chemistry of temporary depression wetlands.

    Directory of Open Access Journals (Sweden)

    Matthew S Bird

    Full Text Available Temporary wetlands dominate the wet season landscape of temperate, semi-arid and arid regions, yet, other than their direct loss to development and agriculture, little information exists on how remaining wetlands have been altered by anthropogenic conversion of surrounding landscapes. This study investigates relationships between the extent and type of habitat transformation around temporary wetlands and their water column physico-chemical characteristics. A set of 90 isolated depression wetlands (seasonally inundated occurring on coastal plains of the south-western Cape mediterranean-climate region of South Africa was sampled during the winter/spring wet season of 2007. Wetlands were sampled across habitat transformation gradients according to the areal cover of agriculture, urban development and alien invasive vegetation within 100 and 500 m radii of each wetland edge. We hypothesized that the principal drivers of physico-chemical conditions in these wetlands (e.g. soil properties, basin morphology are altered by habitat transformation. Multivariate multiple regression analyses (distance-based Redundancy Analysis indicated significant associations between wetland physico-chemistry and habitat transformation (overall transformation within 100 and 500 m, alien vegetation cover within 100 and 500 m, urban cover within 100 m; although for significant regressions the amount of variation explained was very low (range: ∼2 to ∼5.5%, relative to that explained by purely spatio-temporal factors (range: ∼35.5 to ∼43%. The nature of the relationships between each type of transformation in the landscape and individual physico-chemical variables in wetlands were further explored with univariate multiple regressions. Results suggest that conservation of relatively narrow (∼100 m buffer strips around temporary wetlands is likely to be effective in the maintenance of natural conditions in terms of physico-chemical water quality.

  4. Recent Progress in Chemical and Chemoenzymatic Synthesis of Carbohydrates

    Science.gov (United States)

    Muthana, Saddam; Cao, Hongzhi; Chen, Xi

    2011-01-01

    Summary The important roles that carbohydrates play in biological processes and their potential application in diagnosis, therapeutics, and vaccine development have made them attractive synthetic targets. Despite ongoing challenges, tremendous progresses have been made in recent years for the synthesis of carbohydrates. The chemical glycosylation methods have become more sophisticated and the synthesis of oligosaccharides has become more predictable. Simplified one-pot glycosylation strategy and automated synthesis are increasingly used to obtain biologically important glycans. On the other hand, chemoenzymatic synthesis continues to be a powerful alternative for obtaining complex carbohydrates. This review highlights recent progress in chemical and chemoenzymatic synthesis of carbohydrates with a particular focus on the methods developed for the synthesis of oligosaccharides, polysaccharides, glycolipids, and glycosylated natural products. PMID:19833544

  5. Physico-mechanical and chemical screening of packaging plastics and laminates for food irradiation

    International Nuclear Information System (INIS)

    Cabalar, Patrick Jay E.; Laurio, Christian D.

    2014-03-01

    Evaluation of selected commercially-available packaging plastics and laminated plastics i.e., PET12/PE50, PET12/CPS40, Laminaed PET/PE, VMPET12/PE70, Nylon/PE, Nylon15/PE50, PET/Foil/PE, PlainPET/FOIL7/PE100, and OPP20/Foil6.5/PE40, are conducted by employing methods for determining physico-mechanical properties and performing chemical analyses to assess the suitability for food irradiation at 10kGy. Isotope Ratio Mass Spectrometry (IR-MS0 is also performed to measure isotopic ratio changes of 18 O/ 16 O and 2 H/ 1 H to determine raqdiolysis on water in contact with the packaging materials. IR-MS suggests that PET/FOIL PE and OPP 20/Foil 6.5/PE40 in δ 18 O%o after irradiation has significantly increased. Tensile strength and Young's modulus are obtained to assess physical changes between irradiated samples. Data showed that PET12/CPS40 have the highet tensile strength 60.2 MPa and Young's modulus (141.80GPa) value, after irradiation and has no significant difference to their non irradiated samples. Other packaging materials with the same result are OPP20/FOIL6.5/PE40, PET12/PE50 and NYLON50/PE. Residual test gives information on the extent of leaching or radiolytic byproduct evolved upon irradiation. Based on the result, all packaging plastics and laminates passess the overall migration test since residues did not significanty migrated. Chemical screening includes GPC and GC-MS analyses in determining the possible radiolytic by-products that liberate upon rdiation of the samples s well as determining the components that is already present prior to irradiation. Based on the comparison of the chromatograms ofGPC for both samples of VMPET12/PE70 and OPP20/Foil6.5/PE40, radiation has small effect on the yield of radiolytic leachates aside from increasing the abundance of the componenet that is already present prior to irradiation. GC-MS results suggest that PET/FOIL/PE produced volatile compounds before and after irradiation namely 3,3-Dimethylheptane (8

  6. From the coupling between ion beam analysis techniques and physico-chemical characterization methods to the study of irradiation effects on materials behaviour

    International Nuclear Information System (INIS)

    Millard-Pinard, N.

    2003-01-01

    The general purpose of my research work is to follow and to interpret the surface evolution of materials, which have received several treatments. During my PhD and my post-doc work, my field of research was tribology. Since I arrived in the 'Aval du Cycle Electronucleaire' group of the Institut de Physique Nucleaire de Lyon, my research activities are in line with the CNRS program 'PACE ' (Programme sur l'Aval du Cycle Electronucleaire) within the ACTINET network. They are coordinated by the PARIS (Physico-chimie des actinides et autres radioelements en solution et aux interfaces) and NOMADE (NOuveaux MAteriaux pour les DEchets) GDR with ANDRA (Agence Nationale pour la gestion des Dechets RAdioactifs), EDF and IRSN (Institut de Radioprotection et de Surete Nucleaire) as partner organisations. My work focused on the study of fission products and actinides migration in barrier materials, which may be capable of assuring the long term safety of deep geological repositories. Until now, it was necessary to use the coupling of ion beam analysis techniques and physico-chemical characterization techniques. During the last few months, I have became interested in understanding radiolytic effects. This new orientation has led us to use ion beams as an irradiating tool. These irradiation experiments are pursued in three major projects. The study of cobalt sulfide inhibition effects of radiolysis gas production during the irradiation of model organic molecules. This is a collaboration with the IRSN, the Institut de Recherche sur la Catalyse and the Ecole Nationale Superieure des Mines de Saint-Etienne. A PhD, co-directed by M. Pijolat from ENSMSE and myself, concerning this study will start in October 2003. Water radiolysis effects on iron corrosion are also studied in the particular case of vitrified nuclear waste containers, which will be stored in deep geological repositories. One ANDRA financed PhD, co-directed by Nathalie Moncoffre and myself, is dedicated to this study

  7. Interactions between mammalian cells and nano- or micro-sized wear particles: physico-chemical views against biological approaches.

    Science.gov (United States)

    Prokopovich, Polina

    2014-11-01

    Total joint arthroplasty (TJA) is a more and more frequent approach for the treatment of end-stage osteoarthritis in young and active adults; it successfully relieves joint pain and improves function significantly enhancing the health-related quality of life. Aseptic loosening and other wear-related complications are some of the most recurrent reasons for revision of TJA. This review focuses on current understanding of the biological reactions to prosthetic wear debris comparing in vivo and in vitro results. Mechanisms of interactions of various types of cells with metal, polymeric and ceramic wear particles are summarised. Alternative views based on multidisciplinary approaches are proposed to consider physico-chemical, surface parameters of wear particles (such as: particle size, geometry and charge) and material (particle chemical composition and its nature) with biological effects (cellular responses). Copyright © 2014 Elsevier B.V. All rights reserved.

  8. Influence of wood-derived biochar on the physico-mechanical and chemical characteristics of agricultural soils

    Science.gov (United States)

    Ahmed, Ahmed S. F.; Raghavan, Vijaya

    2018-01-01

    Amendment of soil with biochar has been shown to enhance fertility and increase crop productivity, but the specific influence of biochar on soil workability remains unclear. Select physico-mechanical and chemical properties of clay loam and sandy loam soils were measured after amendment with wood-derived biochar of two particle size ranges (0.5-425 and 425-850 µm) at five dosages ranging from 0.5 to 10% dry weight. Whereas the clay loam soil workability decreased when the finer wood-derived biochar was applied at rates of 6 or 10%, soil fertility was not enhanced. The sandy loam soil, due to Proctor compaction, significantly decreased in bulk density with 6 and 10% wood-derived biochar amendments indicating higher soil resistance to compaction.

  9. Effect of ultrasonic treatment on the physico-chemical parameters of kvass

    Directory of Open Access Journals (Sweden)

    V. A. Demchenko

    2016-01-01

    Full Text Available In this paper, for the intensification of production kvass process are encouraged to use the installation "Wave-M" UZTA-1/22-OM sonication product. The aim of the experiment was to study the effect of treatment of process water and the yeast suspension with ultrasound in the production of kvass. To achieve its objectives for the Department of technological machinery and equipment ITMO University experimental setup was designed. In the course of the experiment we studied the effect of ultrasonic treatment on the physico-chemical characteristics of the finished beverage, made in different formulations, depending on the tiered effect of ultrasound. Organoleptic evaluation of the product was carried out, and active acidity measured amount of dry matter in the finished beverage. When processing kvass ultrasound power of 60 and 90 W at a tasting in the product became noticeable pleasant caramel flavor. Due to this effect may be replaced in the production of soft drinks expensive equipment used for cooking in sugar syrup tinting siropovarochnyh, kolerovarochnyh boilers cheaper ultrasonic unit. The acidity of the samples increased within acceptable limits. On the amount of solids in kvass ultrasonic treatment did not significantly affected. To increase the shelf life of the beverage used microfiltration. Anticipated acceleration of the process of obtaining fermented kvass 2 times. It is shown that the filtration using the dosing of ultrasound in the production of kvass not only reduce the cost of the equipment and remove some of the tra-ditional processes, but also provide with the cold sterilization of kvass with higher quality indicators.

  10. Group Chemical Changes and Physical Property Correlations in Refining of Lube Base Stocks. Physico-Chemical and Adsorption Chromatography Parameters Corrélations entre les propriétés physiques et les changements de composition chimique au cours du raffinage des huiles de base. Paramètres physico-chimiques et de chromatographie par adsorption

    Directory of Open Access Journals (Sweden)

    Singh H.

    2006-11-01

    Full Text Available Changes in twenty-two lubricating oil base stocks prepared from Darius and Assam Mix Crudes by different types of refining treatment and severity of refining have been investigated. Changes in the viscosity index with progressive refining in base stocks of different viscosity have been studied in relation to physico-chemical properties, structural analysis and saturate contents of the base oils. Correlations between the concentration of saturates, saturate-to-aromatic ratio and VI of the base stocks are reported.

  11. The consequences of changes in forest land cover in the Alpine and Jurassic massifs on the physico-chemical status of deep lake waters

    Directory of Open Access Journals (Sweden)

    Rachid Nedjai

    2012-02-01

    Full Text Available The issue of acidification in lake waters has been the topic of numerous scientific studies in northern Europe and North America. In recent years, interest in the topic has spread to southern Europe and Asia because similar symptoms have been observed (drop in pH and in redox potential, generally accompanied by oxygen depletion. All the scientific work on the issue has concluded that the phenomenon is general and affects, to different degrees, lakes located at low to medium altitudes in mountains (the Vosges mountains and more recently the Jura mountains, in France. The difference in degree is often interpreted as the result of different combinations from three sources, namely acid rain, direct discharges of pollutants and the spread of forests (essentially conifer species. The first two sources have been confirmed, but the third is less perceptible due to slow progression of the phenomenon.Analysis and modelling of changes in land cover in the Hérisson river basin in the Jura mountains (largely carbonated soils confirmed the direct impact of the forest cover on the physico-chemical quality of lake waters, in particular at the deeper levels (hypolimnion over the past 30 years. The impact is reinforced by the considerable presence of peat zones around the lakes which, during high-water periods, contribute large quantities of dissolved, particulate organic matter.The goal of this work is to show the direct impact of the increasing forest cover observed on the Jurassic plateaus, caused by a considerable reduction in farming activity over the past 30 years. This work focuses on an analysis of land cover (vegetation, using four satellite images spanning the period from 1975 to 2006, and calls on hydrogeochemical modelling (WARMF to evaluate changes in the physico-chemical quality, i.e. acidification, of deep lake waters. This first step is followed by a predictive phase prior to measuring the intensity of the physico-chemical changes (pH and redox

  12. Mineralogical and physico-chemical characterization of Mbodiene palygorskite for pharmaceutical applications

    Science.gov (United States)

    Sylla Gueye, Rokhaya; Davy, Catherine A.; Cazaux, Frédéric; Ndiaye, Augustin; Diop, Mouhamadou Bassir; Skoczylas, Frédéric; Wele, Alassane

    2017-11-01

    This contribution provides a wide morphological, mineralogical, chemical and physical characterization of Mbodiene palygorskite (Senegal), to serve as a basis for the formulation of antidiarrheal and cosmetic products. Data are compared with other palygorskite deposits, either in Senegal or on other continents. Qualitative total rock XRD, semi-quantitative XRD of the clay fraction and quantitative X-Ray fluorescence (XRF) show the presence of 72%wt palygorskite (±2%wt), 13%wt montmorillonite (±2%wt), 8%wt dolomite (±2%wt), 5%wt quartz SiO2 (±2%wt) and 2%wt inter-stratified illite/smectite (±2%wt). Coupled SEM + EDX and TEM + EDX confirm the presence of fibrous palygorskite, with greater amounts of Mg than Al, and Fe substitution to Mg and Al, interspersed with dolomite cubes CaMg(CO3)2. The presence of carbonates in Mbodiene palygorskite may limit its use in the Pharmacopoeia, and make its purification necessary. A specific signature of Mbodiene palygorskite, relevant to the palygorskite family, is deduced from both FTIR and TGA analysis. In terms of physico-chemical characterization, Mbodiene palygorskite has usual values when compared to the literature (for its specific surface area, specific gravity, compressibility and Haussner indexes, CEC, loss on ignition, etc.). After grinding (down to a peak grain size of 500 nm), Mbodiene palygorskite is considered a normal clay, extremely highly plastic, with hard consistency owing to the values of its Atterberg plasticity and liquidity limits, with good flowability owing to its compressibility and Haussner indexes. Its physical characteristics are suitable for manufacturing pastes and colloidal suspensions.

  13. CLEAN CHEMICAL SYNTHESIS IN WATER

    Science.gov (United States)

    Newer green chemistry approach to accomplish chemical synthesis in water is summarized. Recent global developments pertaining to C-C bond forming reactions using metallic reagents and direct use of the renewable materials such as carbohydrates without derivatization are described...

  14. Year-Long Monitoring of Physico-Chemical and Biological Variables Provide a Comparative Baseline of Coral Reef Functioning in the Central Red Sea.

    Science.gov (United States)

    Roik, Anna; Röthig, Till; Roder, Cornelia; Ziegler, Maren; Kremb, Stephan G; Voolstra, Christian R

    2016-01-01

    Coral reefs in the central Red Sea are sparsely studied and in situ data on physico-chemical and key biotic variables that provide an important comparative baseline are missing. To address this gap, we simultaneously monitored three reefs along a cross-shelf gradient for an entire year over four seasons, collecting data on currents, temperature, salinity, dissolved oxygen (DO), chlorophyll-a, turbidity, inorganic nutrients, sedimentation, bacterial communities of reef water, and bacterial and algal composition of epilithic biofilms. Summer temperature (29-33°C) and salinity (39 PSU) exceeded average global maxima for coral reefs, whereas DO concentration was low (2-4 mg L-1). While temperature and salinity differences were most pronounced between seasons, DO, chlorophyll-a, turbidity, and sedimentation varied most between reefs. Similarly, biotic communities were highly dynamic between reefs and seasons. Differences in bacterial biofilms were driven by four abundant families: Rhodobacteraceae, Flavobacteriaceae, Flammeovirgaceae, and Pseudanabaenaceae. In algal biofilms, green crusts, brown crusts, and crustose coralline algae were most abundant and accounted for most of the variability of the communities. Higher bacterial diversity of biofilms coincided with increased algal cover during spring and summer. By employing multivariate matching, we identified temperature, salinity, DO, and chlorophyll-a as the main contributing physico-chemical drivers of biotic community structures. These parameters are forecast to change most with the progression of ocean warming and increased nutrient input, which suggests an effect on the recruitment of Red Sea benthic communities as a result of climate change and anthropogenic influence. In conclusion, our study provides insight into coral reef functioning in the Red Sea and a comparative baseline to support coral reef studies in the region.

  15. Year-Long Monitoring of Physico-Chemical and Biological Variables Provide a Comparative Baseline of Coral Reef Functioning in the Central Red Sea

    KAUST Repository

    Roik, Anna Krystyna

    2016-11-09

    Coral reefs in the central Red Sea are sparsely studied and in situ data on physico-chemical and key biotic variables that provide an important comparative baseline are missing. To address this gap, we simultaneously monitored three reefs along a cross-shelf gradient for an entire year over four seasons, collecting data on currents, temperature, salinity, dissolved oxygen (DO), chlorophyll-a, turbidity, inorganic nutrients, sedimentation, bacterial communities of reef water, and bacterial and algal composition of epilithic biofilms. Summer temperature (29–33°C) and salinity (39 PSU) exceeded average global maxima for coral reefs, whereas DO concentration was low (2–4 mg L-1). While temperature and salinity differences were most pronounced between seasons, DO, chlorophyll-a, turbidity, and sedimentation varied most between reefs. Similarly, biotic communities were highly dynamic between reefs and seasons. Differences in bacterial biofilms were driven by four abundant families: Rhodobacteraceae, Flavobacteriaceae, Flammeovirgaceae, and Pseudanabaenaceae. In algal biofilms, green crusts, brown crusts, and crustose coralline algae were most abundant and accounted for most of the variability of the communities. Higher bacterial diversity of biofilms coincided with increased algal cover during spring and summer. By employing multivariate matching, we identified temperature, salinity, DO, and chlorophyll-a as the main contributing physico-chemical drivers of biotic community structures. These parameters are forecast to change most with the progression of ocean warming and increased nutrient input, which suggests an effect on the recruitment of Red Sea benthic communities as a result of climate change and anthropogenic influence. In conclusion, our study provides insight into coral reef functioning in the Red Sea and a comparative baseline to support coral reef studies in the region.

  16. Year-Long Monitoring of Physico-Chemical and Biological Variables Provide a Comparative Baseline of Coral Reef Functioning in the Central Red Sea

    KAUST Repository

    Roik, Anna Krystyna; Rö thig, Till; Roder, Cornelia; Ziegler, Maren; Kremb, Stephan Georg; Voolstra, Christian R.

    2016-01-01

    Coral reefs in the central Red Sea are sparsely studied and in situ data on physico-chemical and key biotic variables that provide an important comparative baseline are missing. To address this gap, we simultaneously monitored three reefs along a cross-shelf gradient for an entire year over four seasons, collecting data on currents, temperature, salinity, dissolved oxygen (DO), chlorophyll-a, turbidity, inorganic nutrients, sedimentation, bacterial communities of reef water, and bacterial and algal composition of epilithic biofilms. Summer temperature (29–33°C) and salinity (39 PSU) exceeded average global maxima for coral reefs, whereas DO concentration was low (2–4 mg L-1). While temperature and salinity differences were most pronounced between seasons, DO, chlorophyll-a, turbidity, and sedimentation varied most between reefs. Similarly, biotic communities were highly dynamic between reefs and seasons. Differences in bacterial biofilms were driven by four abundant families: Rhodobacteraceae, Flavobacteriaceae, Flammeovirgaceae, and Pseudanabaenaceae. In algal biofilms, green crusts, brown crusts, and crustose coralline algae were most abundant and accounted for most of the variability of the communities. Higher bacterial diversity of biofilms coincided with increased algal cover during spring and summer. By employing multivariate matching, we identified temperature, salinity, DO, and chlorophyll-a as the main contributing physico-chemical drivers of biotic community structures. These parameters are forecast to change most with the progression of ocean warming and increased nutrient input, which suggests an effect on the recruitment of Red Sea benthic communities as a result of climate change and anthropogenic influence. In conclusion, our study provides insight into coral reef functioning in the Red Sea and a comparative baseline to support coral reef studies in the region.

  17. Year-Long Monitoring of Physico-Chemical and Biological Variables Provide a Comparative Baseline of Coral Reef Functioning in the Central Red Sea.

    Directory of Open Access Journals (Sweden)

    Anna Roik

    Full Text Available Coral reefs in the central Red Sea are sparsely studied and in situ data on physico-chemical and key biotic variables that provide an important comparative baseline are missing. To address this gap, we simultaneously monitored three reefs along a cross-shelf gradient for an entire year over four seasons, collecting data on currents, temperature, salinity, dissolved oxygen (DO, chlorophyll-a, turbidity, inorganic nutrients, sedimentation, bacterial communities of reef water, and bacterial and algal composition of epilithic biofilms. Summer temperature (29-33°C and salinity (39 PSU exceeded average global maxima for coral reefs, whereas DO concentration was low (2-4 mg L-1. While temperature and salinity differences were most pronounced between seasons, DO, chlorophyll-a, turbidity, and sedimentation varied most between reefs. Similarly, biotic communities were highly dynamic between reefs and seasons. Differences in bacterial biofilms were driven by four abundant families: Rhodobacteraceae, Flavobacteriaceae, Flammeovirgaceae, and Pseudanabaenaceae. In algal biofilms, green crusts, brown crusts, and crustose coralline algae were most abundant and accounted for most of the variability of the communities. Higher bacterial diversity of biofilms coincided with increased algal cover during spring and summer. By employing multivariate matching, we identified temperature, salinity, DO, and chlorophyll-a as the main contributing physico-chemical drivers of biotic community structures. These parameters are forecast to change most with the progression of ocean warming and increased nutrient input, which suggests an effect on the recruitment of Red Sea benthic communities as a result of climate change and anthropogenic influence. In conclusion, our study provides insight into coral reef functioning in the Red Sea and a comparative baseline to support coral reef studies in the region.

  18. Advanced treatment of liquid swine manure using physico-chemical treatment

    Energy Technology Data Exchange (ETDEWEB)

    Chelme-Ayala, Pamela [Department of Civil and Environmental Engineering, University of Alberta, Edmonton, Alberta (Canada); El-Din, Mohamed Gamal, E-mail: mgamalel-din@ualberta.ca [Department of Civil and Environmental Engineering, University of Alberta, Edmonton, Alberta (Canada); Smith, Richard [Department of Agricultural, Food and Nutritional Science, University of Alberta, Edmonton, Alberta (Canada); Code, Kenneth R. [IOWC Technologies Inc., Edmonton, Alberta (Canada); Leonard, Jerry [Edmonton Waste Management Centre of Excellence, Edmonton, Alberta (Canada)

    2011-02-28

    Research highlights: {yields} Swine manure was treated by coagulation/flocculation followed by an oxidation step. {yields} This physicochemical treatment removed suspended solids, total organic carbon and nutrients. {yields} Complete total coliforms reduction was achieved in diluted swine manure samples. {yields} Levels of ammonia, hydrogen sulphide, and carbon dioxide gases were reduced. {yields} Reduced sludge production was achieved at natural swine manure pH. - Abstract: In this study, liquid swine manure was treated by physico-chemical treatment, including coagulation, flocculation, and sedimentation followed by an oxidation step as a polishing treatment at a bench-scale level. A superabsorbent polymer (SAP) and a mineral and salt formulation able to generate molecular iodine were used as coagulant and oxidant agents, respectively. The results indicated that SAP at a concentration of 1.25 g/L was able to reduce 32% of the initial total suspended solids (TSS) in experiments using supernatant at its natural pH. Following the SAP application, 82% of initial ammonia (NH{sub 3}), 78% of initial total organic carbon (TOC), and 93% of the total coliforms were reduced using 40 mg/L of free iodine. In experiments performed with diluted supernatant (five-fold dilution), it was found that SAP at a concentration of 0.5 g/L was capable of reducing 80% of the initial TSS in experiments at pH 11. A leaching study was conducted to assess the safety of sludge disposal. From the leaching tests using non-diluted supernatant, it was found that 24% of the chloride (Cl{sup -}) and 50% of the phosphate (PO{sub 4}{sup 3-}) ions retained in the sludge leached to the ultrapure water after 48 h. Potential contamination due to leaching of NH{sub 3}, nitrite (NO{sub 2}{sup -}) and nitrate (NO{sub 3}{sup -}) was found to be statistically insignificant.

  19. Physico-chemical properties and fertility status of water eroded soils of Sharkul area of district Mansehra, Pakistan

    Directory of Open Access Journals (Sweden)

    Farmanullah Khan, A. Iqbal

    2011-11-01

    Full Text Available Soil degradation is the major threat to agricultural sustainability because it affects the soil productivity. Present study was conducted in 2008 to evaluate physico-chemical properties and fertility status of some eroded soil series of Sharkul area district Manshera, Hazara division, Khyber Pakhtunkhwa, Pakistan. Six soil series including slightly eroded (Dosera and Girari, moderately eroded (Nakholi and Sharkul and severely eroded (Ahl and Banser were selected. Soil samples were collected from surface (0-15 cm, subsurface (30-45 cm and substrata soil (60-75cm depths and were analyzed for various soil properties. Due to severity of erosion, bulk density increased, while total porosity, saturation percentage and organic matter decreased significantly. AB-DTPA extractable P, K, Fe, Cu, Zn, and Mn concentrations were decreased due to the severity of erosion in surface and sub surface soils, whereas in the substrata soils (60-75 cm depth, the effect of erosion was almost non significant. Sub-surface and sub-strata soils were found deficient in available P ( Zn > Fe > Mn. The physical and chemical properties of eroded soils varied significantly and the increasing severity of erosion resulted in corresponding deterioration of soil quality.

  20. The physico-chemical 131I species in the exhaust air of a boiling water reactor (BWR 4)

    International Nuclear Information System (INIS)

    Deuber, H.

    1982-12-01

    In a German boiling water reactor, the physico-chemical 131 I species were determined in the plant exhaust and in the individual exhausts during 12 months. These measurements aimed in particular at determining the percentage and the source of the radiologically decisive elemental 131 I released to the environment. The retention of the 131 I species by iodine filters was also investigated. On an average, 45% of the 131 I discharged with the plant exhaust consisted of elemental iodine. This was largely released with the exhaust from the reactor building and from the turbine building. The other 55% consisted almost entirely of organic I. (orig./HP) [de

  1. Simultaneous incorporation of carbonate and fluoride in synthetic apatites: Effect on crystallographic and physico-chemical properties.

    Science.gov (United States)

    Yao, Fang; LeGeros, John P; LeGeros, Racquel Z

    2009-07-01

    The mineral in bone is an impure hydroxyapatite, with carbonate as the chief minor substituent. Fluoride has been shown to stimulate osteoblastic activity and inhibit osteoclastic resorption in vitro. CO(3)- and F-substituted apatite (CFA) has been considered as potential bone graft material for orthopedic and dental applications. The objective of this study was to determine the effects of simultaneously incorporated CO(3) and F on the crystallographic physico-chemical properties of apatite. The results showed that increasing CO(3) and Na content in apatites with relatively constant F concentration caused a decrease in crystallite size and an increase in the extent of calcium release; increasing F content in apatites with relatively constant CO(3) concentration caused an increase in crystallite size and a decrease in the extent of Ca release. These findings suggest that CFAs as bone graft materials of desired solubility can be prepared by manipulating the relative concentrations of CO(3) and F incorporated in the apatite.

  2. Physico-chemical properties and performance of high oleic and palm-based shortenings.

    Science.gov (United States)

    Ramli, Muhamad Roddy; Lin, Siew Wai; Yoo, Cheah Kien; Idris, Nor Aini; Sahri, Miskandar Mat

    2008-01-01

    Solid fat from fractionation of palm-based products was converted into cake shortening at different processing conditions. High oleic palm stearin with an oleic content of 48.2 % was obtained from fractionation of high oleic palm oil which was produced locally. Palm product was blended with different soft oils at pre-determined ratio and further fractionated to obtain the solid fractions. These fractions were then converted into cake shortenings named as high oleic, N1 and N2 blends. The physico-chemical properties of the experimental shortenings were compared with those of control shortenings in terms of fatty acid composition (FAC), iodine value (IV), slip melting point (SMP), solid fat content (SFC) and polymorphic forms. Unlike the imported commercial shortenings as reported by other studies and the control, experimental shortenings were trans-free. The SMP and SFC of experimental samples, except for the N2 sample, fell within the ranges of commercial and control shortenings. The IV was higher than those of domestic shortenings but lower when compared to imported and control shortenings. They were also observed to be beta tending even though a mixture of beta and beta' was observed in the samples after 3 months of storage. The shortenings were also used in the making of pound cake and sensory evaluation showed the good performance of high oleic sample as compared to the other shortenings.

  3. Determination of heavy metal content and physico-chemical properties of soils in the vicinity of Tasik Chini, Pahang

    International Nuclear Information System (INIS)

    Sahibin Abdul Rahim; Muhd Barzani Gasim; Mohd Nizam Mohd Said; Wan Mohd Razi Idris; Azman Hashim; Sharilnizam Yusof; Masniyana Jamil

    2008-01-01

    This study was carried out to determine heavy metal content and physico-chemical properties of soils influencing heavy metal accumulation in some series surrounding the Chini Lakes. A total of 15 topsoil sample were collected randomly from 6 stations. The physical properties that were analyzed include particle size distribution and soil organic matter. Meanwhile, the chemical characteristics determined were pH, electrical conductivity and cation exchange capacity. It was found that heavy metal content of Cd, Cr, Cu, Co, Pb, Zn and Mn were low whereas Fe content was high. The textures of soil studied were clay, loamy sand, sandy loam, clay loam and silty clay loam. The mean of organic matter ranged from 2.68 to 11.46 %. The soil pH showed that the soil studied was acidic with values ranged between 3.36 to 3.72. The range of electrical conductivity mean was between 2150 μScm -1 to 2403 μScm -1 . Cation exchange capacity mean ranged from 2.85 until 8.59 cmol/ kg. Correlation analysis showed that there were positive and negative significant correlations between soils parameters heavy metal concentration. Analysis of variance (ANOVA) showed that there were significant differences in organic matter percentage, pH, cation exchange capacity and heavy metals except cadmium between sampling station. (author)

  4. Physico-Chemical and Environmental Characterisation of the Dust from Dry Dedusting of the Green Sand

    Directory of Open Access Journals (Sweden)

    Bobrowski A.

    2016-12-01

    Full Text Available The article presents research results of physico-chemical and environmental issues for the dust generated during dedusting of the installation for the processing and preparation of moulding sand with bentonite. Particular attention was paid to the content of heavy metals and emission of gases from the BTEX group, which is one of the determinants of the moulding sands harmfulness for the environment. The analysis of heavy metals in the test samples indicate that there is an increase of the content of all metals in the dust compared to the initial mixture of bentonite. The most significant (almost double increase observed for zinc is probably related to the adsorption of this element on the dust surface by contact with the liquid metal. The study showed, that dust contained more than 20% of the amount of montmorillonite and had a loss on ignition at a similar level. The addition of 1% of dust to the used moulding sand results in almost 30% increase in the total volume of gases generated in casting processes and nearly 30% increase of the benzene emission.

  5. Proximate Analysis And The Determination Of Some Physico ...

    African Journals Online (AJOL)

    ... Mg (296.00-371.50 µg/g) and Ca (1165.00-1335.50 µg/g) with few exceptions. The results obtained show good agreement with literature values and provide information on the nutritional value of some of the common evaporated milks sold on Nigerian markets. Keywords: Milk, proximate analysis, physico-chemical, AAS

  6. Physico-Chemical Analysis of Groundwater and Agriculture Soil of Gambat, Khairpur District, Pakistan

    International Nuclear Information System (INIS)

    Pirzada, T.; Talpur, M.M.A.; Qazi, Y.F.; Naseem, S.

    2013-01-01

    This study was conducted to estimate the ground water as well as agriculture soil quality, nutrient status and physico-chemical characteristics of Gambat, District Khairpur, Pakistan. Assorted parameters like temperature, pH, EC, TDS, Cl-, SO/sub 4/sup 2-/, HCO/sub 3/ /sup -/, sodium, potassium, calcium, magnesium, SAR values as well as the Piper and Stiff diagrams were determined to confer a clear picture of quality parameters in ground water and agriculture soil of the area. The present investigations conclude that the maximum parameters are not at the level of pollution except major metal ions Na/sup +/ and Ca/sup 2+/. The higher concentration of Ca/sup 2+/ and Na/sup +/ could be due to the deposits of the salts of these elements into soil, which may had leached into ground water. The Piper diagram suggest that composition of water is (Na+/sup +/K/sup +/)-(Ca/sup 2+/+Mg/sup 2+/)-HCO/sub 3/ /sup -/ - (Cl/sup -/+SO/sub 4//sup 2-/)-type. The areal distribution of stiff diagram constructed for groundwater samples showed ionic balances, indicating the major ion analyses are of good quality. Therefore, both ground water and soil samples observed are satisfactory for their utilization in various purposes such as domestic, agricultural, industrial, etc. (author)

  7. Comparative Studies of Physico-chemical Properties of Some ...

    African Journals Online (AJOL)

    Akorede

    cement (As, Br, De and Sk) sold in Nigerian market using standard methods; due to the persistent collapse of buildings. ... important factors for chemical control in cement (Nasir and .... and mixed for 90s; this was allowed to stop at every 15s in.

  8. Physico-chemical properties, antioxidant activity and mineral contents of pineapple genotypes grown in china.

    Science.gov (United States)

    Lu, Xin-Hua; Sun, De-Quan; Wu, Qing-Song; Liu, Sheng-Hui; Sun, Guang-Ming

    2014-06-23

    The fruit physico-chemical properties, antioxidant activity and mineral contents of 26 pineapple [Ananas comosus (L.) Merr.] genotypes grown in China were measured. The results showed great quantitative differences in the composition of these pineapple genotypes. Sucrose was the dominant sugar in all 26 genotypes, while citric acid was the principal organic acid. Potassium, calcium and magnesium were the major mineral constituents. The ascorbic acid (AsA) content ranged from 5.08 to 33.57 mg/100 g fresh weight (FW), while the total phenolic (TP) content varied from 31.48 to 77.55 mg gallic acid equivalents (GAE)/100 g FW. The two parameters in the predominant cultivars Comte de Paris and Smooth Cayenne were relative low. However, MD-2 indicated the highest AsA and TP contents (33.57 mg/100 g and 77.55 mg GAE/100 g FM, respectively), and it also showed the strongest antioxidant capacity 22.85 and 17.30 μmol TE/g FW using DPPH and TEAC methods, respectively. The antioxidant capacity of pineapple was correlated with the contents of phenolics, flavonoids and AsA. The present study provided important information for the further application of those pineapple genotypes.

  9. Chemical synthesis of membrane proteins by the removable backbone modification method.

    Science.gov (United States)

    Tang, Shan; Zuo, Chao; Huang, Dong-Liang; Cai, Xiao-Ying; Zhang, Long-Hua; Tian, Chang-Lin; Zheng, Ji-Shen; Liu, Lei

    2017-12-01

    Chemical synthesis can produce membrane proteins bearing specifically designed modifications (e.g., phosphorylation, isotope labeling) that are difficult to obtain through recombinant protein expression approaches. The resulting homogeneously modified synthetic membrane proteins are valuable tools for many advanced biochemical and biophysical studies. This protocol describes the chemical synthesis of membrane proteins by condensation of transmembrane peptide segments through native chemical ligation. To avoid common problems encountered due to the poor solubility of transmembrane peptides in almost any solvent, we describe an effective procedure for the chemical synthesis of membrane proteins through the removable-backbone modification (RBM) strategy. Two key steps of this protocol are: (i) installation of solubilizing Arg4-tagged RBM groups into the transmembrane peptides at any primary amino acid through Fmoc (9-fluorenylmethyloxycarbonyl) solid-phase peptide synthesis and (ii) native ligation of the full-length sequence, followed by removal of the RBM tags by TFA (trifluoroacetic acid) cocktails to afford the native protein. The installation of RBM groups is achieved by using 4-methoxy-5-nitrosalicyladehyde by reduction amination to incorporate an activated O-to-N acyl transfer auxiliary. The Arg4-tag-modified membrane-spanning peptide segments behave like water-soluble peptides to facilitate their purification, ligation and mass characterization.

  10. Profiles of antibiotic susceptibilities of bacterial isolates and physico ...

    African Journals Online (AJOL)

    The Venda region of South Africa is predominantly rural and residents rely on untreated water sources for daily water needs. The physico-chemical quality of these water sources including antibiotic susceptibilities of enteric bacterial isolates which would guide clinicians in the empiric management of diarrhoea have ...

  11. Investigation of water sources as reservoirs of Vibrio cholerae in Bepanda, Douala and determination of physico-chemical factors maintaining its endemicity

    Directory of Open Access Journals (Sweden)

    Akoachere J.-F.K. Tatah

    2012-06-01

    Full Text Available Cholera remains a significant cause of mortality in developing countries. Outbreaks of the disease are associated with poverty, lack of potable water and poor sanitation. The survival and persistence of Vibrio cholerae in water has been shown to depend on physico-chemical factors. We studied water sources in Bepanda, an overcrowded neighbourhood in Douala, Cameroon, with limited access to portable water and very poor sanitary conditions as reservoirs of V. cholerae. We analysed 318 samples from various sources (well, tap, stream from February to July 2009 using standard microbiological techniques and characterised isolates serologically using the polyvalent O1/O139 antisera. Susceptibility to antibiotics previously used for cholera treatment in Douala was studied using the disk diffusion method. Physico-chemical factors (temperature, pH and salinity that could maintain the endemicity of the organism were analysed using standard methods. Eighty-seven (27.4% samples were contaminated, with high isolation rates being obtained from streams (52.4% and wells (29.8%. The number of isolates was significantly higher (P < 0.05 in the rainy season (35.5%. We detected 23 (24% O1 serogroup isolates in streams and wells, whilst 64 (66.6% were non-O1/non-O139. Temperature and salinity correlated positively with the occurrence of the organisms. All isolates were susceptible to fluoroquinolones but high resistance rates to trimethoprim or sulfamethozaxole and tetracycline were observed. Vibrio cholerae is endemic in Bepanda with O1 and non-O1/non-O139 serogroups co-existing in the streams and wells hence the possibility of future outbreaks of cholera if sanitation and drinking water quality are not improved. Temperature and salinity are amongst the factors maintaining the endemicity of the organism.

  12. Physico-chemical and toxicological assessment of liquid wastes from olive processing-related industries.

    Science.gov (United States)

    Pierantozzi, Pierluigi; Zampini, Catiana; Torres, Mariela; Isla, María I; Verdenelli, Romina A; Meriles, José M; Maestri, Damián

    2012-01-30

    In the last few years, agricultural uses of waste waters from olive processing-related industries have been gaining interest mainly with a view to composting or bio-fertilizers. The present work examines physico-chemical, toxicological and geno-toxicological properties of three liquid wastes, namely olive mill wastewater (OMWW), olive wet husk and olive brine. The effect of OMWW spreading on soil microbial activity and biomass was also evaluated. Data from Artemia salina and Lactuca sativa toxicity tests indicated high levels of lethality, and inhibitory effects on seed germination and seedling growth of all olive wastes. The genotoxicity assays using Allium cepa tests showed contrasting results. At high concentrations, olive wastes caused inhibition or suppression of mitosis. However, they did not produce induced anaphase aberrations. Data on reversion of Salmonella thyphimurium strains using the Ames test indicated that the olive wastes did not present mutagenic activity. Results from the field experiment showed that OMWW at a 500 m(3) ha(-1) had the highest values of both soil microbial activity and biomass after 3 months of the amendment application. This work adds new data for environmental risk assessment of olive industrial wastes. Direct use of olive wastes for agricultural purposes should be limited owing to their possible chemotoxic, phytotoxic and antimicrobial effects. Copyright © 2011 Society of Chemical Industry.

  13. Poloxamer 407/188 binary thermosensitive hydrogels as delivery systems for infiltrative local anesthesia: Physico-chemical characterization and pharmacological evaluation

    International Nuclear Information System (INIS)

    Akkari, Alessandra C.S.; Papini, Juliana Z. Boava; Garcia, Gabriella K.; Franco, Margareth K.K. Dias; Cavalcanti, Leide P.; Gasperini, Antonio; Alkschbirs, Melissa Inger; Yokaichyia, Fabiano; Paula, Eneida de; Tófoli, Giovana R.; Araujo, Daniele R. de

    2016-01-01

    In this study, we reported the development and the physico-chemical characterization of poloxamer 407 (PL407) and poloxamer 188 (PL188) binary systems as hydrogels for delivering ropivacaine (RVC), as drug model, and investigate their use in infiltrative local anesthesia for applications on the treatment of post-operative pain. We studied drug-micelle interaction and micellization process by light scattering and differential scanning calorimetry (DSC), the sol-gel transition and hydrogel supramolecular structure by small-angle-X-ray scattering (SAXS) and morphological evaluation by Scanning Electron Microscopy (SEM). In addition, we have presented the investigation of drug release mechanisms, in vitro/in vivo toxic and analgesic effects. Micellar dimensions evaluation showed the formation of PL407-PL188 mixed micelles and the drug incorporation, as well as the DSC studies showed increased enthalpy values for micelles formation after addition of PL 188 and RVC, indicating changes on self-assembly and the mixed micelles formation evoked by drug incorporation. SAXS studies revealed that the phase organization in hexagonal structure was not affected by RVC insertion into the hydrogels, maintaining their supramolecular structure. SEM analysis showed similar patterns after RVC addition. The RVC release followed the Higuchi model, modulated by the PL final concentration and the insertion of PL 188 into the system. Furthermore, the association PL407-PL188 induced lower in vitro cytotoxic effects, increased the duration of analgesia, in a single-dose model study, without evoking in vivo inflammation signs after local injection. - Highlights: • We present the development and relationships between physico-chemical and biopharmaceutical/pharmacological parameters for the PL407-PL188 binary hydrogel, as well as its use for infiltrative local anesthesia • The addition of PL188 and RVC evoked changes on enthalpy values, self-assembly and the mixed micelles formation • The

  14. Poloxamer 407/188 binary thermosensitive hydrogels as delivery systems for infiltrative local anesthesia: Physico-chemical characterization and pharmacological evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Akkari, Alessandra C.S. [Human and Natural Sciences Center, ABC Federal University, Santo André, SP (Brazil); Papini, Juliana Z. Boava [São Francisco University, Bragança Paulista, São Paulo (Brazil); Garcia, Gabriella K. [Human and Natural Sciences Center, ABC Federal University, Santo André, SP (Brazil); Franco, Margareth K.K. Dias [Nuclear and Energy Research Institute, São Paulo, SP (Brazil); Cavalcanti, Leide P. [School of Chemical Engineering, University of Campinas, SP (Brazil); Gasperini, Antonio; Alkschbirs, Melissa Inger [Brazilian Synchrotron Light Laboratory, Campinas, SP (Brazil); Yokaichyia, Fabiano [Department Quantum Phenomena in Novel Materials Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Berlin (Germany); Paula, Eneida de [Department of Biochemistry, Institute of Biology, State University of Campinas, Campinas, SP (Brazil); Tófoli, Giovana R. [Faculty of Dentistry São Leopoldo Mandic, Campinas, São Paulo (Brazil); Araujo, Daniele R. de, E-mail: daniele.araujo@ufabc.edu.br [Human and Natural Sciences Center, ABC Federal University, Santo André, SP (Brazil)

    2016-11-01

    In this study, we reported the development and the physico-chemical characterization of poloxamer 407 (PL407) and poloxamer 188 (PL188) binary systems as hydrogels for delivering ropivacaine (RVC), as drug model, and investigate their use in infiltrative local anesthesia for applications on the treatment of post-operative pain. We studied drug-micelle interaction and micellization process by light scattering and differential scanning calorimetry (DSC), the sol-gel transition and hydrogel supramolecular structure by small-angle-X-ray scattering (SAXS) and morphological evaluation by Scanning Electron Microscopy (SEM). In addition, we have presented the investigation of drug release mechanisms, in vitro/in vivo toxic and analgesic effects. Micellar dimensions evaluation showed the formation of PL407-PL188 mixed micelles and the drug incorporation, as well as the DSC studies showed increased enthalpy values for micelles formation after addition of PL 188 and RVC, indicating changes on self-assembly and the mixed micelles formation evoked by drug incorporation. SAXS studies revealed that the phase organization in hexagonal structure was not affected by RVC insertion into the hydrogels, maintaining their supramolecular structure. SEM analysis showed similar patterns after RVC addition. The RVC release followed the Higuchi model, modulated by the PL final concentration and the insertion of PL 188 into the system. Furthermore, the association PL407-PL188 induced lower in vitro cytotoxic effects, increased the duration of analgesia, in a single-dose model study, without evoking in vivo inflammation signs after local injection. - Highlights: • We present the development and relationships between physico-chemical and biopharmaceutical/pharmacological parameters for the PL407-PL188 binary hydrogel, as well as its use for infiltrative local anesthesia • The addition of PL188 and RVC evoked changes on enthalpy values, self-assembly and the mixed micelles formation • The

  15. Physico-chemical protection, rather than biochemical composition, governs the responses of soil organic carbon decomposition to nitrogen addition in a temperate agroecosystem.

    Science.gov (United States)

    Tan, Wenbing; Wang, Guoan; Huang, Caihong; Gao, Rutai; Xi, Beidou; Zhu, Biao

    2017-11-15

    The heterogeneous responses of soil organic carbon (SOC) decomposition in different soil fractions to nitrogen (N) addition remain elusive. In this study, turnover rates of SOC in different aggregate fractions were quantified based on changes in δ 13 C following the conversion of C 3 to C 4 vegetation in a temperate agroecosystem. The turnover of both total organic matter and specific organic compound classes within each aggregate fraction was inhibited by N addition. Moreover, the intensity of inhibition increases with decreasing aggregate size and increasing N addition level, but does not vary among chemical compound classes within each aggregate fraction. Overall, the response of SOC decomposition to N addition is dependent on the physico-chemical protection of SOC by aggregates and minerals, rather than the biochemical composition of organic substrates. The results of this study could help to understand the fate of SOC in the context of increasing N deposition. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Physico-chemical quality of drinking water in the city of Antsirabe

    International Nuclear Information System (INIS)

    ANDRIANARILALA, M.T.

    2005-01-01

    This work has been carried out to measure physico-chemical quality of drinking water, and to determine the sources of contaminant in order to contribute to the improvement of water quality in the region of Antsirabe. Ion chromatography analytical method has been used for measuring ion component of water. The sample type proceeds from the well water, spring water and tap water. The results obtained indicate that several samples are considered as not in accordance with criterion required by the water quality standards. Drinking water samples contain potassium in concentration ranges from 1.42 mg.L - 1 to 51.47mg.L - 1. Measured maximum value of concentration is largely higher than the acceptable value [12 mg.L - 1] Concerning the nitrate, maximum and the minimum concentration values are 0.13 mg.L - 1 and 167.96 mg.L - 1; where as the acceptable value recommended by the water quality standard (OMS) is less than 44 mg.L - 1. The presence of potassium and nitrate in drinking water may due to the pollution of the surrounding environment of water sources. The excess of nitrate is susceptible to provoke the methemoglobinemia. Over exposure of potassium is to be harmful for heart [fr

  17. Physico-chemical quality of drinking water in the northwest area of Madrid (Spain); Calidad fisico-quimica de las aguas de abastecimiento de la zona noroeste de Madrid

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Mata, M.; Orzaez Villanueva, M. T.; Tenorio Sanz, M. D.; Garcia Puertas, P. [Universidad Complutense de Madrid (Spain); Montes Boltella, C. [Universidad Carlos III. Leganes Madrid (Spain)

    2001-07-01

    A physico-chemical analytical study of the edible waters of the northwest area of Madrid has been made. The object was to evaluate the quality characters of this water thought the water analysis of 40 representative buildings. The parameters analyzed were odour, taste, turbidity, pH, conductivity, nitrate, nitrite, ammonia, oxid ability and chlorine. The results show the analyzed waters agree with the current public consume waters legislation through with some punctual exceptions. (Author) 13 refs.

  18. Phosphorylated benzimedazoles. 8. Synthesis of phosphorylated with /sup 32/P benzimidazoles

    Energy Technology Data Exchange (ETDEWEB)

    Makarov, A M; Matevosyan, G L; Zavlin, P M [Leningradskij Sel' skokhozyajstvennyj Inst. (USSR)

    1983-03-01

    Accessible methods of synthesis and identification of phosphorylated benzimidazoles with specific activity close to the maximum permissible with labelled /sup 32/P are developed. These methods permit to determine the permissible residual amounts of the above preparations in nutrition products and the maximum permissible amounts of growth regulators in different objects of the environment, because it is impossible to detect, for example, tri(1-benzimidazolido)phosphate with other physico-chemical methods with the existing concentration of 10/sup -9/%.

  19. Iodide behaviour in hard clay rocks under controlled physico-chemical conditions at different concentrations

    International Nuclear Information System (INIS)

    Frasca, B.; Savoye, S.; Wittebroodt, C.; Leupin, O.X.; Descostes, M.; Grenut, B.; Meier, P.; Michelot, J.L.

    2010-01-01

    Document available in extended abstract form only. With a half-life of 1.6 10 7 years, its high mobility and its potential to accumulate in the biosphere, iodine-129 is considered, from safety assessment calculations for radioactive waste repositories, to be one of the main radiological dose contributors. Based on the findings of previous studies, iodide, especially at low concentrations, seems to be migrating at a slower rate in clay rock than Cl-36. The cause of this retardation regarding the diffusion of iodide versus chloride is not yet understood but several hypotheses are point towards sorption on natural organic matter (NOM), pyrite or redox reactions. Oxidation of iodide would form IO 3 - which is known to have a higher sorption affinity on several soils and sediment samples than iodide. The present project aims at exploring the effect on the iodide behaviour of two parameters: (i) the initial concentration of iodide and (ii) the amount of NOM contained in the argillite samples. Such an investigation is carried out on Tournemire argillite by means of both batch and through-diffusion experiments. The main challenge is to exclude as much as possible the occurrence of any experimental artefact that could induce iodide uptake (oxygen contamination, dissolution/precipitation of carbonate phases). Regarding redox conditions and rock equilibrium, all the experiments were carried out under physico-chemical conditions as close as possible to those prevailing in field. Using a glove box with an atmosphere of N 2 /CO 2 (respectively 99.6% and 0.4%), we preserved the experiments from oxygen and maintained the calculated in-situ carbonate equilibrium. At first, four through-diffusion experiments with the non-sorbing tracers HTO and Cl-36 were performed to allow the diffusive parameters of each sample to be defined. Afterwards, iodide was injected in the diffusion cells at four different concentrations (10 -6 M to 10 -3 M). Thus, the comparison of the incoming fluxes of

  20. Physico-chemical treatment of coke plant effluents for control of water pollution in India

    Energy Technology Data Exchange (ETDEWEB)

    Ghose, M.K. [Indian School of Mines, Dhanbad (India). Center of Mining Environmental

    2002-01-01

    Coal carbonizing industries in India are important and are growing every year. Large quantities of liquid effluents produced in this industry contain a large amount of suspended solids, high biochemical oxygen demand (BOD), chemical oxygen demand (COD), phenols, ammonia and other toxic substances, which are causing serious surface water pollution in the area. There is a large number of coke plants in the vicinity of Jharia Coal Field (JCF). The working principle of a coke plant and the effluents produced is described. One large coke plant was chosen to evaluate characteristics of the effluent and to suggest a proper treatment method. Present effluent treatment system was found to be inadequate and a large quantity of a very good quality coke breeze is being lost, which is also causing siltation on the riverbed in addition to surface water pollution. Physico-chemical treatment has been considered as a suitable option for the treatment of coke plant effluents. A scheme has been proposed for the treatment, which can be suitably adopted for the recycling, reuse or safe disposal of the treated effluent. Various unit process and unit operations are discussed. The process may be useful on industrial scale for various sites so as to maintain a clean environment.

  1. Physico-chemical properties and fatty acid composition of pomegranate, cherry and pumpkin seed oils.

    Science.gov (United States)

    Siano, Francesco; Straccia, Maria C; Paolucci, Marina; Fasulo, Gabriella; Boscaino, Floriana; Volpe, Maria G

    2016-03-30

    Nut and seed oils are often considered waste products but in recent years they have been receiving growing interest due to their high concentration of hydrophilic and lipophilic bioactive components, which have important pharmacological properties on human health. The aim of this work was to compare the physico-chemical and biochemical properties of pomegranate (Punicagranatum), sweet cherry (Prunusavium) and pumpkin (Cucurbita maxima) seed oils obtained by solvent extraction. High amount of linoleic acid was found in the cherry and pumpkin seed oils, while pomegranate seed oil showed relevant content of polyunsaturated fatty acids (PUFAs) and monounsaturated fatty acids (MUFAs) along to eicosapentaenoic acid (EPA) and nervonic acid. Pumpkin seed oil had high concentration of carotenoids, while pomegranate oil was the best absorber in the UV-A and UV-B ranges. Pomegranate, cherry and pumpkin seed oils can be an excellent source of bioactive molecules and antioxidant compounds such as polyphenols, carotenoids and unsaturated fatty acids. These seed oils can be included both as preservatives and functional ingredients in the food, pharmaceutical and cosmetic fields and can contribute to disease prevention and health promotion. Moreover, high absorbance of UV light indicates a potential use of these oils as filters from radiations in the food, pharmaceutical, and cosmetic fields. © 2015 Society of Chemical Industry.

  2. Assessing electronic cigarette emissions: linking physico-chemical properties to product brand, e-liquid flavoring additives, operational voltage and user puffing patterns.

    Science.gov (United States)

    Zhao, Jiayuan; Nelson, Jordan; Dada, Oluwabunmi; Pyrgiotakis, Georgios; Kavouras, Ilias G; Demokritou, Philip

    2018-02-01

    Users of electronic cigarettes (e-cigs) are exposed to particles and other gaseous pollutants. However, major knowledge gaps on the physico-chemical properties of such exposures and contradictory data in published literature prohibit health risk assessment. Here, the effects of product brand, type, e-liquid flavoring additives, operational voltage, and user puffing patterns on emissions were systematically assessed using a recently developed, versatile, e-cig exposure generation platform and state-of-the-art analytical methods. Parameters of interest in this systematic evaluation included two brands (A and B), three flavors (tobacco, menthol, and fruit), three types of e-cigs (disposable, pre-filled, and refillable tanks), two puffing protocols (4 and 2 s/puff), and four operational voltages (2.2-5.7 V). Particles were generated at a high number concentration (10 6 -10 7 particles/cm 3 ). The particle size distribution was bi-modal (∼200 nm and 1 µm). Furthermore, organic species (humectants propylene glycol and glycerin, nicotine) that were present in e-liquid and trace metals (potassium and sodium) that were present on e-cig heating coil were also released into the emission. In addition, combustion-related byproducts, such as benzene and toluene, were also detected in the range of 100-38,000 ppbv/puff. Parametric analyzes performed in this study show the importance of e-cig brand, type, flavor additives, user puffing pattern (duration and frequency), and voltage on physico-chemical properties of emissions. This observed influence is indicative of the complexity associated with the toxicological screening of emissions from e-cigs and needs to be taken into consideration.

  3. Externally predictive single-descriptor based QSPRs for physico-chemical properties of polychlorinated-naphthalenes: Exploring relationships of log S{sub W}, log K{sub OA}, and log K{sub OW} with electron-correlation

    Energy Technology Data Exchange (ETDEWEB)

    Chayawan; Vikas, E-mail: qlabspu@pu.ac.in

    2015-10-15

    Highlights: • Aqueous solubility and partition coefficient are modelled using single-parameter. • Electron-correlation observed as a vital predictorof physico-chemical properties. • For octanol-air partition coefficient, energy and polarizability yield best models. • Dipole-moment is found to be worst single-descriptor for the properties analysed. - Abstract: Quantitative structure–property relationships (QSPRs), based only on a single-parameter, are proposed for the prediction of physico-chemical properties, namely, aqueous solubility (log S{sub W}), octanol–water partition coefficient (log K{sub OW}) and octanol–air partition coefficient (log K{sub OA}) of polychloronaphthalenes (PCNs) including all the 75 chloronaphthalene congeners. The QSPR models are developed using molecular descriptors computed through quantum mechanical methods including ab-initio as well as advanced semi-empirical methods. The predictivity of the developed models is tested through state-of-the-art external validation procedures employing an external prediction set of compounds. To analyse the role of instantaneous interactions between electrons (the electron-correlation), the models are also compared with those developed using only the electron-correlation contribution of the quantum chemical descriptor. The electron-correlation contribution towards the chemical hardness and the LUMO energy are observed to be the best predictors for octanol–water partition coefficient, whereas for the octanol–air partition coefficient, the total electronic energy and electron-correlation energy are found to be reliable descriptors, in fact, even better than the polarisability. For aqueous solubility of PCNs, the absolute electronegativity is observed to be the best predictor. This work suggests that the electron-correlation contribution of a quantum-chemical descriptor can be used as a reliable indicator for physico-chemical properties, particularly the partition coefficients.

  4. Physico-chemical evaluation of bitter and non-bitter Aloe and their raw juice for human consumption.

    Science.gov (United States)

    Azam, M M; Kumar, S; Pancholy, A; Patidar, M

    2014-11-01

    In addition to Aloe vera which is bitter in taste, a non-bitter Aloe is also found in arid part of Rajasthan. This non-bitter Aloe (NBA) is sporadically cultivated as vegetable and for health drink. In spite of its cultivation and various uses, very little information is available about its detailed botanical parameters and chemical characters. This study aims to evaluate the physico-chemical characters of NBA through employing floral morphology, leaf characters and leaf gel and to compare them with those of A. vera. Of eleven floral characters studied, eight characters of NBA were significantly different from that of A. vera. Most visible difference was observed in their reproductive shoots which are highly branched in NBA (5.21 inflorescence/shoot) as compared to A. vera (1.5 inflorescence/shoot). NBA produces less leaf-biomass (-29.32 %) with less leaf-thickness (-31.44 %) but higher leaf length, width, and no. of spine/side by 17.56 %, 21.34 % and 16.11 %, respectively, with significant difference as compared to A. vera. But its polysaccharide content (0.259 %) is at par with that of A. vera. The raw juice from the leaf of NBA has very low aloin content (4.1 ppm) compared to that from A. vera (427.3 ppm) making it a safer health drink compared to the one obtained from A. vera. Thus, NBA raw juice emerged as suitable alternative to A. vera juice for human consumption.

  5. Room temperature synthesis of glycerol carbonate catalyzed by spray dried sodium aluminate microspheres

    OpenAIRE

    Sreerangappa, Ramesh; Debecker, Damien P.; 13th European Congress on Catalysis – EuropaCat 2017

    2017-01-01

    Nanostructured NaAlO2 microspheres are produced by one-pot spray dried route, and are characterized by various physico-chemical methods. The obtained solids are composed of spherical aggregates of sodium aluminate with small crystallite size and strong surface basicity. This makes them highly active catalysts in the base-catalyzed synthesis of glycerol carbonate from glycerol and dimethyl carbonate. The catalyst does not leach and showed good reusability up to three cycles.

  6. Effect of added ingredients on water status and physico-chemical properties of tomato sauce.

    Science.gov (United States)

    Diantom, Agoura; Curti, Elena; Carini, Eleonora; Vittadini, Elena

    2017-12-01

    Different ingredients (guar, xanthan, carboxy methyl cellulose, locust bean gums, potato fiber, milk, potato and soy proteins) were added to tomato sauce to investigate their effect on its physico-chemical properties. The products were characterized in terms of colour, rheological properties (Bostwick consistency, flow behavior and consistency coefficient), water status (water activity, moisture content) and molecular mobility by 1 H Nuclear Magnetic Resonance (NMR). Water activity was significantly decreased only by the addition of potato fiber. Xanthan, locust bean, guar and carboxy methyl cellulose significantly enhanced Bostwick consistency and consistency coefficient. Type of ingredient and concentration significantly affected 1 H NMR mobility indicators. Principal component analysis (PCA) indicated that only 1 H NMR mobility parameters were able to differentiate the effect of milk protein, xanthan and potato fiber on tomato sauce properties. The information collected in this work provides information to intelligently modulate tomato sauce attributes and tailor its properties for specific applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Physical, Chemical and Periphyton/Phytoplankton Study of Onah ...

    African Journals Online (AJOL)

    physico-chemical parameter, viz: ionic conductivity factor contributed 26.07%, nutrient factor contributed 40.61% while dissolved oxygen factor contributed 33.32%. Three divisions, eight families and ten species of periphyton were encountered. The most abundant periphyton species recorded are Closterium spp. (26.37%) ...

  8. Method for innovative synthesis-design of chemical process flowsheets

    DEFF Research Database (Denmark)

    Kumar Tula, Anjan; Gani, Rafiqul

    Chemical process synthesis-design involve the identification of the processing route to reach a desired product from a specified set of raw materials, design of the operations involved in the processing route, the calculations of utility requirements, the calculations of waste and emission...... to the surrounding and many more. Different methods (knowledge-based [1], mathematical programming [2], hybrid, etc.) have been proposed and are also currently employed to solve these synthesis-design problems. D’ Anterroches [3] proposed a group contribution based approach to solve the synthesis-design problem...... of chemical processes, where, chemical process flowsheets could be synthesized in the same way as atoms or groups of atoms are synthesized to form molecules in computer aided molecular design (CAMD) techniques [4]. That, from a library of building blocks (functional process-groups) and a set of rules to join...

  9. Effect of ultrasonic and microwave disintegration on physico-chemical and biodegradation characteristics of waste-activated sludge.

    Science.gov (United States)

    Doğruel, Serdar; Özgen, Aslı Sedem

    2017-04-01

    The purpose of this study was to investigate the effect of ultrasonic and microwave disintegration on physico-chemical and biodegradability properties of waste-activated sludge (WAS) from a municipal wastewater treatment plant. Another aim was to carry out particle size distribution (PSD) analysis as an integral component of sludge characterization to highlight the transformation mechanisms involved in pretreatment processes and better understand the biodegradation patterns of sonicated and irradiated WAS liquids examined by means of respirometric measurements. Various combinations of sonication and microwave irradiation parameters were applied to optimize operating conditions. The optimum ultrasonic density was determined as 1.5 W/mL, and energy dosages lower than 30,000 kJ/kg TS resulted in a fairly linear increase in the soluble chemical oxygen demand (SCOD) release. An irradiation time of 10 min and a temperature of 175°C were selected as the optimum microwave pretreatment conditions for sludge liquefaction. The most apparent impact of ultrasonication on the PSD of COD was the shifting of the peak at the particulate fraction (>1600 nm) toward the lowest size range (<2 nm). Microwave heating at the selected experimental conditions and ultrasonic pretreatment at 30,000 kJ/kg TS exhibited comparable size distribution and biodegradation characteristics to those of domestic sewage.

  10. Evaluation of the physico-chemical, rheological and sensory characteristics of commercially available Frankfurters in Spain and consumer preferences.

    Science.gov (United States)

    González-Viñas, M A; Caballero, A B; Gallego, I; García Ruiz, A

    2004-08-01

    The physico-chemical, rheological and sensory characteristics of different commercially available Frankfurters were studied. Samples presented values of A(w) and pH from 0.954 to 0.972 and 5.88 to 6.43, respectively. Greater differences were observed in parameters such as fat and salt content, with values ranging from 10.83% to 21.92% and 1.85% to 3.01%, respectively. With regard to total nitrogen, all samples presented values close to 2%. Free-choice profiling and generalised procrustes analysis of the sensory data permitted differentiation between samples and provided information about the attributes responsible for the observed differences. All the frankfurters scored in the moderate range for overall acceptability. Consumers identified reasons for purchasing frankfurters when evaluating the product's packaging. The most important criterion for consumers when purchasing frankfurters was the appetising aspect of the product in the packaging's illustration.

  11. Effect of Caesalpinia sappan L. extract on physico-chemical properties of emulsion-type pork sausage during cold storage.

    Science.gov (United States)

    Jin, Sang-Keun; Ha, So-Ra; Choi, Jung-Seok

    2015-12-01

    This study was performed to investigate the effect of extract from heart wood of Caesalpinia sappan on the physico-chemical properties and to find the appropriate addition level in the emulsion-type pork sausage during cold storage. The pH of treatments with C. sappan extract was significantly lower than control and T1 during cold storage periods (Pextract. Also, the texture properties and sensory of sausages containing C. sappan extract were decreased compared to control. Inclusion of the C. sappan extract in sausages resulted in lower lightness and higher yellowness, chroma and hue values. However, the antioxidant, antimicrobial activity, and volatile basic nitrogen in the emulsion-type pork sausages with C. sappan extract showed increased quality characteristics during cold storage. In conclusion, the proper addition level of C. sappan extract was 0.1% on the processing of emulsion-type pork sausage. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Influence of lecithin-lipid composition on physico-chemical properties of nanoliposomes loaded with a hydrophobic molecule.

    Science.gov (United States)

    Bouarab, Lynda; Maherani, Behnoush; Kheirolomoom, Azadeh; Hasan, Mahmoud; Aliakbarian, Bahar; Linder, Michel; Arab-Tehrany, Elmira

    2014-03-01

    In this work, we studied the effect of nanoliposome composition based on phospholipids of docosahexaenoic acid (PL-DHA), salmon and soya lecithin, on physico-chemical characterization of vector. Cinnamic acid was encapsulated as a hydrophobic molecule in nanoliposomes made of three different lipid sources. The aim was to evaluate the influence of membrane lipid structure and composition on entrapment efficiency and membrane permeability of cinnamic acid. These properties are important for active molecule delivery. In addition, size, electrophoretic mobility, phase transition temperature, elasticity and membrane fluidity were measured before and after encapsulation. The results showed a correlation between the size of the nanoliposome and the entrapment. The entrapment efficiency of cinnamic acid was found to be the highest in liposomes prepared from salmon lecithin. The nanoliposomes composed of salmon lecithin presented higher capabilities as a carrier for cinnamic acid encapsulation. These vesicles also showed a high stability which in turn increases the membrane rigidity of nanoliposome as evaluated by their elastic properties, membrane fluidity and phase transition temperature. Copyright © 2013 Elsevier B.V. All rights reserved.

  13. PDE5 Inhibitors-Loaded Nanovesicles: Physico-Chemical Properties and In Vitro Antiproliferative Activity

    Directory of Open Access Journals (Sweden)

    Roberta F. De Rose

    2016-05-01

    Full Text Available Novel therapeutic approaches are required for the less differentiated thyroid cancers which are non-responsive to the current treatment. In this study we tested an innovative formulation of nanoliposomes containing sildenafil citrate or tadalafil, phosphodiesterase-5 inhibitors, on two human thyroid cancer cell lines (TPC-1 and BCPAP. Nanoliposomes were prepared by the thin layer evaporation and extrusion methods, solubilizing the hydrophilic compound sildenafil citrate in the aqueous phase during the hydration step and dissolving the lipophilic tadalafil in the organic phase. Nanoliposomes, made up of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine monohydrate (DPPC, cholesterol, and N-(carbonyl-methoxypolyethylene glycol-2000-1,2-distearoyl-sn-glycero-3-phosphoethanolamine (DSPE-mPEG2000 (6:3:1 molar ratio, were characterized by a mean diameter of ~100 nm, a very low polydispersity index (~0.1 and a negative surface charge. The drugs did not influence the physico-chemical properties of the systems and were efficiently retained in the colloidal structure. By using cell count and MTT assay, we found a significant reduction of the viability in both cell lines following 24 h treatment with both nanoliposomal-encapsulated drugs, notably greater than the effect of the free drugs. Our findings demonstrate that nanoliposomes increase the antiproliferative activity of phosphodiesterase-5 inhibitors, providing a useful novel formulation for the treatment of thyroid carcinoma.

  14. ReportSites - A Computational Method to Extract Positional and Physico- Chemical Information from Large-Scale Proteomic Post-Translational Modification Datasets

    DEFF Research Database (Denmark)

    Edwards, Alistair; Edwards, Gregory; Larsen, Martin Røssel

    2012-01-01

    -translational modification data sets, wherein patterns of sequence surrounding processed sites may reveal more about the functional and structural requirements of the modification and the biochemical processes that regulate them. Results: We developed Report Sites using a test set of phosphoproteomic data from rat......-chemical environment (local pI and hydrophobicity). These were then also compared to corresponding values extracted from the full database to allow comparison of phosphorylation trends. Conclusions: Report Sites enabled physico-chemical aspects of protein phosphorylation to be deciphered in a test set of eleven...... thousand phospho sites. Basic properties of modified proteins, such as site location in the context of the complete protein, were also documented. This program can be easily adapted to any post-translational modification (or, indeed, to any defined amino acid sequence), or expanded to include more...

  15. Chemical reactor development : from laboratory synthesis to industrial production

    NARCIS (Netherlands)

    Thoenes, D.

    1998-01-01

    Chemical Reactor Development is written primarily for chemists and chemical engineers who are concerned with the development of a chemical synthesis from the laboratory bench scale, where the first successful experiments are performed, to the design desk, where the first commercial reactor is

  16. Physico-chemical effects of electron beam radiation on polypropylene film and its polyphenolic antioxydant

    International Nuclear Information System (INIS)

    Aymes-Chodur, C.; Legendre, B.; Yagoubi, N.; Betz, N.

    2002-01-01

    Complete text of publication follows. Even though plastics are widely used in various industrial applications, problems have occurred concerning the quality of the packaged products, due to the presence of potentially toxic additives that can migrate out of the polymer and thus contaminate the surrounding medium. This phenomenon is due to the fact that the additives are only mixed with the polymer powder before the plastic is molded, and as no chemical bond keeps them into the polymer matrix, additives are able to migrate as the plastic ages. In order to avoid this phenomenon, which can lead to the rejection of biomaterials, or food or drugs contamination problems, we intend to graft the additives into the polymer matrix by means of ionizing radiation. Indeed, previous studies have shown that radiation induces the formation of free radicals and hydroperoxides that can react with monomers to create covalent bonds. Our work deals with electron beam irradiation of polypropylene (PP) containing a known concentration of Irganox 1010, a polyphenolic antioxidant. High performance liquid chromatography (HPLC) measurements have been performed in order to evaluate the behavior of the additives under ionizing radiation, but the polymer matrix must also be characterized as a function of the absorbed radiation dose. This present study gives FTIR, high temperature size exclusion chromatography (SEC) and differential scanning calorimetry (DSC) results performed on both PP and Irganox 1010. They evidence the formation of oxidative groups such as free alcohols and hydroperoxides, and the formation of double bonds in the PP. SEC results highlight the scission of the polymer chains correlated to the degradation of the crystalline domains observed by DSC. Those physico-chemical modifications must be characterized for the understanding of the grafting and before the antioxidant activity is evaluated

  17. Transformation processes influencing physico-chemical forms of radionuclides and trace elements in natural water systems

    International Nuclear Information System (INIS)

    Salbu, B.; Riise, G.; Oughton, D.H.

    1995-01-01

    In order to assess short and long term consequences of radionuclides and trace elements introduced to aquatic systems, knowledge on source terms, key factors and key processes influencing the speciation is essential. The mobility, bioavailability and subsequent transfer into food chains depend on the physico-chemical forms on radionuclides and trace metals. In addition, transformation processes and especially the interaction with natural organic matter (NOM) influences the distribution pattern. Furthermore, the prevailing climate conditions, e.g. episodic events and temperature are vital for fluxes and for the kinetics of the transformation processes. In the present work processes in catchments and processes associated with acidification, episodic events, climate conditions (temperature) and mixing zone phenomena influencing the speciation of radionuclides and trace metals are highlighted. These processes should be highly relevant for assessing far field consequences of radionuclides potentially released from disposal sites. (authors). 21 refs., 8 figs., 1 tab

  18. Physico-chemical, nutritional, and volatile composition and sensory profile of Spanish jujube (Ziziphus jujuba Mill.) fruits.

    Science.gov (United States)

    Hernández, Francisca; Noguera-Artiaga, Luis; Burló, Francisco; Wojdyło, Aneta; Carbonell-Barrachina, Ángel A; Legua, Pilar

    2016-06-01

    Jujube fruit is eaten mostly fresh, but may be dried (Chinese dates and tea) or processed into confectionary recipes in bread, cakes, compotes, and candy. Given that the quality of jujube available on the market differs on account of various factors such as geographical environment, cultivar, processing conditions, and storage conditions, and that, for consumers, flavour and nutrition properties of jujube represent the major parameters in determining the quality of jujube, the main goal of this study were to determine the main physico-chemical properties of jujube fruits, sugars and organic acids profiles, protein, mineral constituents, volatile composition and sensory profile of jujube fruits. This would allow breeders to select cultivars with higher levels of nutrients and also enable increasing dietary intake by consumers. Investigations showed that jujube fruit weight ranged from 4.8 to 29.3 g fruit(-1) . Four sugars (glucose, fructose, sucrose and sorbitol) and four organic acids (citric, malic, ascorbic and succinic acids) were identified and quantified by high-performance liquid chromatography in jujube fruits. Potassium, calcium and magnesium were the major mineral constituents in jujube fruits. Fifteen volatiles compounds were found in the aroma profile of jujube fruits (nine were aldehydes, three terpenes, one ester, one ketone and one linear hydrocarbon). The results showed that Spanish jujube cultivars studied are a good source of vitamin C, and they have a low content of Na. The jujube cultivar with the most appreciated quality by consumers was GAL; the GAL fruits were sweet, crunchy, and had high intensities of jujube ID and apple flavour a long after-taste. Therefore, jujube grown in Spain has a great potential to be exploited for functional foods. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

  19. The physico-chemical properties of strawberry tree (Arbutus unedo L. fruits

    Directory of Open Access Journals (Sweden)

    J. Hribar

    2013-01-01

    Full Text Available The physico-chemical properties of ripe fruits of strawberry tree (Arbutus unedo L. were determined. The water content, ash, crude fat, proteins, total phenols, sugar, and the content of vitamin C were determined in ripe strawberry tree fruits. Fruits contain 46.7 % of water, 23.5 % of soluble solids, 0.48 % of ash, 118.61 mg/100 g of potassium, 20.63 mg/100 g of sodium, 36.05 mg/100 g of calcium, 9.66 mg/100 g of magnesium, 1.29 mg/100 g of iron, 19.99 mg/100 g of phosphorus, 0.45 mg/100 g of zinc, < 0.99 mg/100 g of manganese, < 0.99 mg/100 g of chromium, < 0.10 mg/100 g of nickel, < 1.32 mg/100 g of lead and < 0.10 mg/100 g of cadmium. Among nutritionally important components found in fruits were: total fat (0.43 %, proteins (0.82 %, fibres (18.5 g/100 g of which 14.3 g/100g was insoluble and 4.19 g/100 g was soluble fibre, titratable acids (5.1 mg/100 g, glucose (6.2 g/100 g and fructose (17.2 g/100 g. Ripe fruits contained 271.5 mg/100 g vitamin C, of which 255.3 mg/ 100 g was L-ascorbic acid and 16.2 mg/100 g was dehydroascorbic acid.

  20. Applicability of Vacuum Impregnation to Modify Physico-Chemical, Sensory and Nutritive Characteristics of Plant Origin Products—A Review

    Directory of Open Access Journals (Sweden)

    Elżbieta Radziejewska-Kubzdela

    2014-09-01

    Full Text Available Vacuum impregnation is a non-destructive method of introducing a solution with a specific composition to the porous matrices of fruit and vegetables. Mass transfer in this process is a result of mechanically induced differences in pressure. Vacuum impregnation makes it possible to fill large volumes of intercellular spaces in tissues of fruit and vegetables, thus modifying physico-chemical properties and sensory attributes of products. This method may be used, e.g., to reduce pH and water activity of the product, change its thermal properties, improve texture, color, taste and aroma. Additionally, bioactive compounds may be introduced together with impregnating solutions, thus improving health-promoting properties of the product or facilitating production of functional food.

  1. Caractérisation physico-chimique de boues d’unité de production d’eau potable Physico-chemical characterization of sludge from a unit water drinking production

    Directory of Open Access Journals (Sweden)

    Mostahsine S.

    2012-09-01

    Full Text Available La composition chimique des boues hydroxydes, sous-produit de la potabilisation de l’eau est constituée majoritairement d’hydroxydes d’aluminium et de silice, les hydroxydes de Fer, de calcium, de potassium et de magnésium dont le taux peut varier sensiblement selon les périodes de prélèvement des eaux brutes et peut conférer à la boue des propriétés physico-chimiques intéressantes. La composition minéralogique des boues peut également comporter un solidifiant tel que les silicates de calcium. L’observation au MEB de ces boues hydroxydes montre une phase amorphe sous forme de flocons dont la géométrie est mal définie et emprisonnant de petits cristaux de quartz et de muscovite. Ces observations sont en corrélation avec les principales phases minérales mises en évidence dans les essais de diffraction des rayons X. L’étude du comportement thermique des boues, notamment celui de la déshydroxylation et les transformations de phases sont situées dans un intervalle de température compris entre 300 et 800°C. Ces transformations thermiques sont caractérisées par plusieurs méthodes analytiques (DSC, DRX et infrarouge. Les nouvelles phases cristallisées sont sous différentes formes de solutions solides du type (Ca, Al, Si, Fe, K, Mg. Chemical composition of the Hydroxides sludge, by-product of treatment of drinking water, are composed mainly of silica and the hydroxides of aluminium, the ratio of the hydroxides of iron, calcium, potassium and magnesium fluctuate appreciably according to the periods of taking away raw waters, and could confer to the sludge interesting physico-chemical properties. The mineralogical composition of the sludge may also contain a solidifying component such as calcium silicate. The MEB observation shows an amorphous phase in the form of flakes whose geometry is badly defined and imprisoning small muscovite and quartz crystals. These observations are in correlation with principal mineral

  2. Physico-chemistry of continental Bentonites and Kaolin for ceramic ...

    African Journals Online (AJOL)

    ... and the SSA values were between 4 m2g-1 and 19 m2g-1. Raw clay color ranged from white to black with most samples having a greyish-like appearance. These values are in conformity with those obtained by other researchers, and based on their physico-chemical characteristics, the clayey materials were found to be ...

  3. Analysis of the application of selected physico-chemical methods in eliminating odor nuisance of municipal facilities

    Directory of Open Access Journals (Sweden)

    Miller Urszula

    2018-01-01

    Full Text Available Operation of municipal management facilities is inseparable from the problem of malodorous compounds emissions to the atmospheric air. In that case odor nuisance is related to the chemical composition of waste, sewage and sludge as well as to the activity of microorganisms whose products of life processes can be those odorous compounds. Significant reduction of odorant emission from many sources can be achieved by optimizing parameters and conditions of processes. However, it is not always possible to limit the formation of odorants. In such cases it is best to use appropriate deodorizing methods. The choice of the appropriate method is based on in terms of physical parameters, emission intensity of polluted gases and their composition, if it is possible to determine. Among the solutions used in municipal economy, there can be distinguished physico-chemical methods such as sorption and oxidation. In cases where the source of the emission is not encapsulated, odor masking techniques are used, which consists of spraying preparations that neutralize unpleasant odors. The paper presents the characteristics of selected methods of eliminating odor nuisance and evaluation of their applicability in municipal management facilities.

  4. Analysis of the application of selected physico-chemical methods in eliminating odor nuisance of municipal facilities

    Science.gov (United States)

    Miller, Urszula; Grzelka, Agnieszka; Romanik, Elżbieta; Kuriata, Magdalena

    2018-01-01

    Operation of municipal management facilities is inseparable from the problem of malodorous compounds emissions to the atmospheric air. In that case odor nuisance is related to the chemical composition of waste, sewage and sludge as well as to the activity of microorganisms whose products of life processes can be those odorous compounds. Significant reduction of odorant emission from many sources can be achieved by optimizing parameters and conditions of processes. However, it is not always possible to limit the formation of odorants. In such cases it is best to use appropriate deodorizing methods. The choice of the appropriate method is based on in terms of physical parameters, emission intensity of polluted gases and their composition, if it is possible to determine. Among the solutions used in municipal economy, there can be distinguished physico-chemical methods such as sorption and oxidation. In cases where the source of the emission is not encapsulated, odor masking techniques are used, which consists of spraying preparations that neutralize unpleasant odors. The paper presents the characteristics of selected methods of eliminating odor nuisance and evaluation of their applicability in municipal management facilities.

  5. \\'Elaboration du Ge m\\'esoporeux et \\'etude de ses propri\\'et\\'es physico-chimiques en vue d'applications photovolta\\"iques

    OpenAIRE

    Tutashkonko, Sergii

    2014-01-01

    Development of the new nanomaterial - the mesoporous Ge - by bipolar electrochemical etching (BEE) and analysis of its physico-chemical properties is the subject of this thesis. Formation of mesoporous Ge by electrochemical etching was previously reported in the literature. However, up to now, realization of thick (above 500 nm) mesoporous Ge layers with perfectly controlled morphology has been an issue. Indeed, the physico-chemical characterization of thin layers is much more complicated and...

  6. Plasma-chemical synthesis of carbon nanotubes and fullerenes to create frost-resistant composite building materials

    International Nuclear Information System (INIS)

    Semenov, A P; Smirnyagina, N N; Tsyrenov, B O; Dasheev, D E; Khaltarov, Z M

    2017-01-01

    This paper considers a method of synthesis fullerenes and carbon nanotubes at atmospheric pressure. Carbon evaporates into the plasma arc. The paper discusses the method of synthesis of helium at a pressure of 10 5 Pa. We show the dependence yield of fullerenes and carbon nanotubes from the buffer gas pressure. It has been found that the fullerene yield increased with increasing pressure. The obtained fullerenes and nanotubes find their application in the modification of construction materials. The use of carbon nanomodifiers in the modification of the construction is promising since their introduction significantly improves the physico-mechanical properties using a small quantity of additives. With the introduction of the carbon nanomodifier decrease the porosity of cement stone, which leads to high strength and frost-resistant indicators of the modified cement. (paper)

  7. Microbiological, physico-chemical and management parameters ...

    African Journals Online (AJOL)

    Poor working conditions , frequent stock depletion of chemicals , lack of maintenance culture , lack of emergency preparedness and poor communication were also cited. The study has revealed that the microbiological quality of raw water was very poor but that water treatment was efficient in the majority of SWTPs studied ...

  8. ANALYTICAL SYNTHESIS OF CHEMICAL REACTOR CONTROL SYSTEM

    Directory of Open Access Journals (Sweden)

    Alexander Labutin

    2017-02-01

    Full Text Available The problem of the analytical synthesis of the synergetic control system of chemical reactor for the realization of a complex series-parallel exothermal reaction has been solved. The synthesis of control principles is performed using the analytical design method of aggregated regulators. Synthesized nonlinear control system solves the problem of stabilization of the concentration of target component at the exit of reactor and also enables one to automatically transfer to new production using the equipment.

  9. Physico-Chemical Characterization, Bioactive Compounds and Antioxidant Activity of Malay Apple [Syzygium malaccense (L. Merr. & L.M. Perry].

    Directory of Open Access Journals (Sweden)

    Polyana Campos Nunes

    Full Text Available The purpose of this study was to evaluate the physico-chemical characteristics, bioactive compounds and antioxidant activity of Malay apple fruit (Syzygium malaccense grown in Brazil with regard to the geographical origin and its peel fractions and edible portion analyzed independently. Fruit diameter, weight, yield, and centesimal composition, ascorbic acid, reductive sugars, total soluble solids, pH and fiber content were determined. Total phenolics (1293 mg gallic acid equivalent/100 g and total anthocyanins (1045 mg/100 g contents were higher in the peel, with the major anthocyanin identified using HPLC-DAD-MS/MS as cyanidin 3-glucoside. Higher values for DPPH antiradical scavenging activity (47.52 μMol trolox equivalent antioxidant capacity/g and Ferric Reducing Antioxidant Potential (FRAP, 0.19 mM ferreous sulfate/g were also observed in the peel fraction. All extracts tested showed the ability to inhibit oxidation in the β-carotene/linoleic acid system. This study highlights the potential of Malay apple fruit as a good source of antioxidant compounds with potential benefits to human health.

  10. Modelling the physico-chemical effect of silver electrorefining as effect of temperature, free acid, silver, copper and lead concentrations

    Science.gov (United States)

    Aji, Arif T.; Kalliomäki, Taina; Wilson, Benjamin P.; Aromaa, Jari; Lundström, Mari

    2017-01-01

    The study of electrolyte bath properties is essential for the improvement of silver electrolysis based processes. The paper outlines investigations into suitable models for the calculation of physico-chemical properties with the emphasis placed on conductivity, density and viscosity. Measurements were conducted within the industrial operation parameters used for silver electrolytes and the results indicate that these type of industrial electrolytes have an operating conductivity within the range of 60-140 mS/cm, density of 1.05-1.14 g/cm3 and a viscosity of 0.75-0.91 mm2/s. A representative model for each of these properties was proposed in order to calculate the conductivity, density and viscosity of silver electrolyte. From the evaluation of models, it was determined that all models have R2 (accuracy of fit) and Q2 (accuracy of prediction) values above 0.9 and thus can be regarded as excellent models.

  11. A statistical view of protein chemical synthesis using NCL and extended methodologies.

    Science.gov (United States)

    Agouridas, Vangelis; El Mahdi, Ouafâa; Cargoët, Marine; Melnyk, Oleg

    2017-09-15

    Native chemical ligation and extended methodologies are the most popular chemoselective reactions for protein chemical synthesis. Their combination with desulfurization techniques can give access to small or challenging proteins that are exploited in a large variety of research areas. In this report, we have conducted a statistical review of their use for protein chemical synthesis in order to provide a flavor of the recent trends and identify the most popular chemical tools used by protein chemists. To this end, a protein chemical synthesis (PCS) database (http://pcs-db.fr) was created by collecting a set of relevant data from more than 450 publications covering the period 1994-2017. A preliminary account of what this database tells us is presented in this report. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Influence of UF4 physico-chemical properties on the assessment of the chronic exposure to this compound

    International Nuclear Information System (INIS)

    Ansoborlo, E.; Chalabreysse, J.

    1990-01-01

    A method was developed in order to assess uranium exposure hazards at work stations based on the industrial experience acquired by Comurhex Malvesi at Narbonne. Applied to uranium tetrafluoride (UF 4 ) the method involves 4 steps: 1. characterization of the industrial compound, including its physico-chemical properties (density, surface area, X-ray spectrum and uranium enrichment); 2. assessment of work station concentrations and particle size distribution (AMAD); 3. In vitro biological solubility with different synthetic fluids such as Gamble solutions with different gases or compounds added (oxygen or superoxide ions O 2 - ) in order to determine the solubility class D, W or Y; 4. workers' monitoring by routine measurements of urinary excretion completed, if necessary, by fecal excretion and γ-spectrometry. Results and present data on UF 4 are presented. 3 tabs., 4 figs [fr

  13. Construction of collagen II/hyaluronate/chondroitin-6-sulfate tri-copolymer scaffold for nucleus pulposus tissue engineering and preliminary analysis of its physico-chemical properties and biocompatibility.

    Science.gov (United States)

    Li, Chang-Qing; Huang, Bo; Luo, Gang; Zhang, Chuan-Zhi; Zhuang, Ying; Zhou, Yue

    2010-02-01

    To construct a novel scaffold for nucleus pulposus (NP) tissue engineering, The porous type II collagen (CII)/hyaluronate (HyA)-chondroitin-6-sulfate (6-CS) scaffold was prepared using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) and N-hydroxysuccinimide (NHS) cross-linking system. The physico-chemical properties and biocompatibility of CII/HyA-CS scaffolds were evaluated. The results suggested CII/HyA-CS scaffolds have a highly porous structure (porosity: 94.8 +/- 1.5%), high water-binding capacity (79.2 +/- 2.8%) and significantly improved mechanical stability by EDC/NHS crosslinking (denaturation temperature: 74.6 +/- 1.8 and 58.1 +/- 2.6 degrees C, respectively, for the crosslinked scaffolds and the non-crosslinked; collagenase degradation rate: 39.5 +/- 3.4 and 63.5 +/- 2.0%, respectively, for the crosslinked scaffolds and the non-crosslinked). The CII/HyA-CS scaffolds also showed satisfactory cytocompatibility and histocompatibility as well as low immunogenicity. These results indicate CII/HyA-CS scaffolds may be an alternative material for NP tissue engineering due to the similarity of its composition and physico-chemical properties to those of the extracellular matrices (ECM) of native NP.

  14. Life cycle impact assessment modeling for particulate matter: A new approach based on physico-chemical particle properties.

    Science.gov (United States)

    Notter, Dominic A

    2015-09-01

    Particulate matter (PM) causes severe damage to human health globally. Airborne PM is a mixture of solid and liquid droplets suspended in air. It consists of organic and inorganic components, and the particles of concern range in size from a few nanometers to approximately 10μm. The complexity of PM is considered to be the reason for the poor understanding of PM and may also be the reason why PM in environmental impact assessment is poorly defined. Currently, life cycle impact assessment is unable to differentiate highly toxic soot particles from relatively harmless sea salt. The aim of this article is to present a new impact assessment for PM where the impact of PM is modeled based on particle physico-chemical properties. With the new method, 2781 characterization factors that account for particle mass, particle number concentration, particle size, chemical composition and solubility were calculated. Because particle sizes vary over four orders of magnitudes, a sound assessment of PM requires that the exposure model includes deposition of particles in the lungs and that the fate model includes coagulation as a removal mechanism for ultrafine particles. The effects model combines effects from particle size, solubility and chemical composition. The first results from case studies suggest that PM that stems from emissions generally assumed to be highly toxic (e.g. biomass combustion and fossil fuel combustion) might lead to results that are similar compared with an assessment of PM using established methods. However, if harmless PM emissions are emitted, established methods enormously overestimate the damage. The new impact assessment allows a high resolution of the damage allocatable to different size fractions or chemical components. This feature supports a more efficient optimization of processes and products when combating air pollution. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Synthesis and characterization of a cerebral radiotracer

    International Nuclear Information System (INIS)

    Ben hamouda, Salem

    2010-01-01

    The development of nuclear medicine is based on research of new radiopharmaceuticals, in particular, relying on technetium-99m, the most used radioisotope in terms of availability and low cost. A similar study on Rhenium (185/187Re) is essential for monitoring physico-chemical studies due to the high specific activity of technetium-99m. During this work, we have synthesized and labeled with technetium the N-methyl-4-hydroxy piperidinyl ferrocenyl carboxylate. The marking is done by exchange of ligands between the iron group of ferrocene and tricabonyl technetium core. We have succeeded to synthesis the N-methyl-4-hydroxy piperidinyl carboxyl cyclopentadienyl tricarbonyl rhenium (the molecular analogue of the technetium). We characterized it by MS, IR and NMR (1H, 13C) The structure of N-methyl-4-hydroxy piperidinyl carboxyl cyclopentadienyl tricarbonyl technetium is well justified.

  16. Physico-chemical state influences in vitro release profile of curcumin from pectin beads.

    Science.gov (United States)

    Nguyen, An Thi-Binh; Winckler, Pascale; Loison, Pauline; Wache, Yves; Chambin, Odile

    2014-09-01

    Curcumin is a polyphenolic compound with diverse effects interesting to develop health benefit products but its formulation in functional foods or in food supplement is hampered by its poor water solubility and susceptibility to alkaline conditions, light, oxidation and heat. Encapsulation of curcumin could be a mean to overcome these difficulties. In this paper, curcumin was encapsulated by ionotropic gelation method in low methoxyl pectin beads associated with different surfactants: Solutol(®), Transcutol(®) and sodium caseinate. After encapsulation, physico-chemical properties of encapsulated curcumin such as its solubility, physical state, tautomeric forms and encapsulation efficiency as well as encapsulation yield were characterized. In vitro dissolution of curcumin from beads displayed different kinetic profiles according to bead composition due to different matrix network. As Solutol(®) was a good solvent for curcumin, the drug was present into amorphous form in these beads inducing a rapid release of curcumin in the simulated digestive fluids. In contrast, drug release was slower from sodium caseinate beads since curcumin was not totally dissolved during the manufacturing process. Moreover, the FLIM studies showed that a part of curcumin was encapsulated in caseinate micelles and that 34% of this drug was in keto form which may delay the curcumin release. The Transcutol beads showed also a slow drug release because of the low curcumin solubility and the high density of the matrix. Copyright © 2014 Elsevier B.V. All rights reserved.

  17. Physico-Chemical Characteristics and Rheolgical Properties of Different Wheat Varieties Grown in Sindh

    International Nuclear Information System (INIS)

    Chana, M.J.; Ghanghro, A.B.; Sheikh, S.A.; Nizamani, S.M.

    2015-01-01

    This study was designed to investigate the physico-chemical and rheological properties of 17 wheat varieties (TJ-83, Jouhar, TD-1, Anmool, Mehran, Indus-66, Sindh B-1, Abadgar, Bhittai, Imdad, Mexi-Pak, Soughat, Blue Silver, Moomal, Marvi, Kiran, and Pak-70 ) commercially grown on experimental field of Agriculture Research Institute, Tandojam. The results revealed that moisture percentage were in range of 11 to 12 among all varieties, high protein content of about 15.2 percentage was found in Mehran and Blue silver varieties, starch was found high in Maxi-pak (70.6 percentage), high hardness values in Imdad (70.1percentage) and Jouhar (70.2 percentage). However, zeleny content was found high in Marvi, Abadgaar and Mehran i.e. 71 percentage. Amylographic results showed that among all varieties the Bhittai variety required maximum temperature up to 65.7 Degree C for the beginning of gelatinization as compared to other varieties. The highest gelatinization temperature was noted up to 96.7 Degree C in Moomal whereas others had temperature from 82.7 to 89.0 Degree C. Highest gelatinization maxima (1782AU) acquired by T.J-83 variety. The results of Farinograph showed that highest water absorption was noted in Anmool variety. The highest dough development time and dough stability were found highest in Kiran and Indus-66, respectively. T.D-1 and Jouhar varieties had highest break down time as well as highest Farinograph quality. (author)

  18. Microencapsulation of phosphogypsum into a sulfur polymer matrix: Physico-chemical and radiological characterization

    International Nuclear Information System (INIS)

    Lopez, Felix A.; Gazquez, Manuel; Alguacil, Francisco Jose; Bolivar, Juan Pedro; Garcia-Diaz, Irene; Lopez-Coto, Israel

    2011-01-01

    Highlights: → Microencapsulation of phosphogypsum residues into a sulfur polymer matrix. → Inertization of a waste material. → Radiological characterization of the as built new material (phosphogypsum plus sulfur polymer matrix). - Abstract: The aim of this work is to prepare a new type of phosphogypsum-sulfur polymer cements (PG-SPC) to be utilised in the manufacture of building materials. Physico-chemical and radiological characterization was performed in phosphogypsum and phosphogypsum-sulfur polymer concretes and modeling of exhalation rates has been also carried out. An optimized mixture of the materials was obtained, the solidified material with optimal mixture (sulfur/phosphogypsum = 1:0.9, phosphogypsum dosage = 10-40 wt.%) results in highest strength (54-62 MPa) and low total porosity (2.8-6.8%). The activity concentration index (I) in the PG-SPC is lower than the reference value in the most international regulations and; therefore, these cements can be used without radiological restrictions in the manufacture of building materials. Under normal conditions of ventilation, the contribution to the expected radon indoor concentration in a standard room is below the international recommendations, so the building materials studied in this work can be applied to houses built up under normal ventilation conditions. Additionally, and taking into account that the PG is enriched in several natural radionuclides as 226 Ra, the leaching experiments have demonstrated that environmental impact of the using of SPCs cements with PG is negligible.

  19. Microencapsulation of phosphogypsum into a sulfur polymer matrix: Physico-chemical and radiological characterization

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, Felix A., E-mail: flopez@cenim.csic.es [Centro Nacional de Investigaciones Metalurgicas (CENIM), CSIC, Avda. Gregorio del Amo, 8, 28040 Madrid (Spain); Gazquez, Manuel [Departamento de Fisica Aplicada, Universidad de Huelva, Campus de El Carmen, 21071 Huelva (Spain); Alguacil, Francisco Jose [Centro Nacional de Investigaciones Metalurgicas (CENIM), CSIC, Avda. Gregorio del Amo, 8, 28040 Madrid (Spain); Bolivar, Juan Pedro [Departamento de Fisica Aplicada, Universidad de Huelva, Campus de El Carmen, 21071 Huelva (Spain); Garcia-Diaz, Irene [Centro Nacional de Investigaciones Metalurgicas (CENIM), CSIC, Avda. Gregorio del Amo, 8, 28040 Madrid (Spain); Lopez-Coto, Israel [Departamento de Fisica Aplicada, Universidad de Huelva, Campus de El Carmen, 21071 Huelva (Spain)

    2011-08-15

    Highlights: {yields} Microencapsulation of phosphogypsum residues into a sulfur polymer matrix. {yields} Inertization of a waste material. {yields} Radiological characterization of the as built new material (phosphogypsum plus sulfur polymer matrix). - Abstract: The aim of this work is to prepare a new type of phosphogypsum-sulfur polymer cements (PG-SPC) to be utilised in the manufacture of building materials. Physico-chemical and radiological characterization was performed in phosphogypsum and phosphogypsum-sulfur polymer concretes and modeling of exhalation rates has been also carried out. An optimized mixture of the materials was obtained, the solidified material with optimal mixture (sulfur/phosphogypsum = 1:0.9, phosphogypsum dosage = 10-40 wt.%) results in highest strength (54-62 MPa) and low total porosity (2.8-6.8%). The activity concentration index (I) in the PG-SPC is lower than the reference value in the most international regulations and; therefore, these cements can be used without radiological restrictions in the manufacture of building materials. Under normal conditions of ventilation, the contribution to the expected radon indoor concentration in a standard room is below the international recommendations, so the building materials studied in this work can be applied to houses built up under normal ventilation conditions. Additionally, and taking into account that the PG is enriched in several natural radionuclides as {sup 226}Ra, the leaching experiments have demonstrated that environmental impact of the using of SPCs cements with PG is negligible.

  20. Alternative Fuels and Chemicals from Synthesis Gas

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1998-12-02

    The overall objectives of this program are to investigate potential technologies for the conversion of synthesis gas to oxygenated and hydrocarbon fuels and industrial chemicals, and to demonstrate the most promising technologies at DOE's LaPorte, Texas, Slurry Phase Alternative Fuels Development Unit (AFDU). The program will involve a continuation of the work performed under the Alternative Fuels from Coal-Derived Synthesis Gas Program and will draw upon information and technologies generated in parallel current and future DOE-funded contracts.

  1. Alternative fuels and chemicals from synthesis gas

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    1998-08-01

    The overall objectives of this program are to investigate potential technologies for the conversion of synthesis gas to oxygenated and hydrocarbon fuels and industrial chemicals, and to demonstrate the most promising technologies at DOE's LaPorte, Texas, Slurry Phase Alternative Fuels Development Unit (AFDU). The program will involve a continuation of the work performed under the Alternative Fuels from Coal-Derived Synthesis Gas Program and will draw upon information and technologies generated in parallel current and future DOE-funded contracts.

  2. ALTERNATIVE FUELS AND CHEMICALS FROM SYNTHESIS GAS

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    1999-01-01

    The overall objectives of this program are to investigate potential technologies for the conversion of synthesis gas to oxygenated and hydrocarbon fuels and industrial chemicals, and to demonstrate the most promising technologies at DOE's LaPorte, Texas, Slurry Phase Alternative Fuels Development Unit (AFDU). The program will involve a continuation of the work performed under the Alternative Fuels from Coal-Derived Synthesis Gas Program and will draw upon information and technologies generated in parallel current and future DOE-funded contracts.

  3. Alternative Fuels and Chemicals From Synthesis Gas

    Energy Technology Data Exchange (ETDEWEB)

    none

    1998-07-01

    The overall objectives of this program are to investigate potential technologies for the conversion of synthesis gas to oxygenated and hydrocarbon fuels and industrial chemicals, and to demonstrate the most promising technologies at DOE's LaPorte, Texas, Slurry Phase Alternative Fuels Development Unit (AFDU). The program will involve a continuation of the work performed under the Alternative Fuels from Coal-Derived Synthesis Gas Program and will draw upon information and technologies generated in parallel current and future DOE-funded contracts.

  4. A physico-chemical characterisation technique for determining the pore-water chemistry in argillaceous rocks

    International Nuclear Information System (INIS)

    Baeyens, B.; Bradbury, M.H.

    1991-09-01

    A prerequisite for carrying out credible sorption studies is the definition of an aqueous phase composition which is in equilibrium with the solid phase. Experimental methods and data analysis procedures are described which enable an equilibrium water composition to be produced for argillaceous rocks which is not dependent on liquid to solid (L:S) ratios. Since a Valanginian marl formation is under consideration by Nagra as a potential rock for the disposal of low and short-lived medium level radioactive waste in Switzerland, samples of this material were chosen for this investigation. Aqueous phase and nickel ethylenediamine extraction experiments were carried out at different L:S ratios under controlled atmosphere conditions (P CO 2 =10 -2 bar, O 2 ≤ 5 ppm ). The results from these tests and petrographical examinations were combined to define the system in terms of the physico-chemical characteristics of the clay mineral component (CEC and cation occupancies) and the identities of highly soluble and solubility limited phases in the marl. The geochemical code PHREEQE was used in conjunction with the Gapon equations to calculate the pore water composition. This work clearly showed that pore water chemistries obtained from aqueous extracts alone may lead to an arbitrary water chemistry in argillaceous rock systems, particularly with respect to ionic composition and ionic strength, which may have important consequences for radionuclide speciation and sorption studies. (author) 11 figs., 12 tabs., 25 refs

  5. Mapping student thinking in chemical synthesis

    Science.gov (United States)

    Weinrich, Melissa

    In order to support the development of learning progressions about central ideas and practices in different disciplines, we need detailed analyses of the implicit assumptions and reasoning strategies that guide students' thinking at different educational levels. In the particular case of chemistry, understanding how new chemical substances are produced (chemical synthesis) is of critical importance. Thus, we have used a qualitative research approach based on individual interviews with first semester general chemistry students (n = 16), second semester organic chemistry students (n = 15), advanced undergraduates (n = 9), first year graduate students (n = 15), and PhD candidates (n = 16) to better characterize diverse students' underlying cognitive elements (conceptual modes and modes of reasoning) when thinking about chemical synthesis. Our results reveal a great variability in the cognitive resources and strategies used by students with different levels of training in the discipline to make decisions, particularly at intermediate levels of expertise. The specific nature of the task had a strong influence on the conceptual sophistication and mode of reasoning that students exhibited. Nevertheless, our data analysis has allowed us to identify common modes of reasoning and assumptions that seem to guide students' thinking at different educational levels. Our results should facilitate the development of learning progressions that help improve chemistry instruction, curriculum, and assessment.

  6. Porewater Chemistry in Compacted Re-Saturated MX-80 Bentonite: Physico-Chemical Characterisation and Geochemical Modelling

    International Nuclear Information System (INIS)

    Bradbury, M. H.; Baeyens, B.

    2002-06-01

    Bentonites of various types are being investigated in many countries as backfill materials in high-level radioactive waste disposal concepts. Being able to understand the chemistry of the pore water in compacted bentonite, and the factors which influence it, is critical to the synthesis of sorption data bases and to predicting radionuclide solubilities, and hence to repository safety studies. However, quantification of the water chemistry in compacted bentonite is difficult because reliable samples for chemical analysis cannot be obtained even by squeezing at exceedingly high pressures. In this report concepts are developed which are somewhat different from those used in previously published works on bentonite pore water. Considerations of the swelling properties of montmorillonite led to the proposition that there were, generally speaking, three types of water associated with re-saturated compacted bentonite. The water defined as the pore water is only a small fraction of the total. The pore water volume present in re-saturated bentonites having different initial dry densities was quantified using CI- 'through diffusion' data. Highly compacted bentonite is considered to function as an efficient semi-permeable membrane so that re-saturation involves predominantly the movement of water molecules and not solute molecules. This implies that the composition of the external saturating aqueous phase is a second order effect. Consequently CI- concentrations in the pore water could be calculated from the deduced pore water volume values and the measured CI- inventory. The pH of the pore water of a compacted bentonite is an extremely important parameter because of its influence on radionuclide solubility and sorption. Arguments are presented in support of the thesis that the initial pH is fixed by the high buffering capacity afforded by the amphoteric =SOH sites. The pH of the pore water depends directly on the speciation of these sites i.e. the proportions of sites present

  7. Effect of natural Bayah zeolite particle size reduction to physico-chemical properties and absortion against potassium permanganate (KMnO4)

    Science.gov (United States)

    Widayanti, Siti Mariana; Syamsu, Khaswar; Warsiki, Endang; Yuliani, Sri

    2016-02-01

    Recently, researches on nanotechnology have been developed very rapid, as well as the utilization of nano-zeolites. Nano-sized material has several advantages which are expanding absorptive surfaces so it will enhance the material absorption and shorten the absorption time. Zeolite as a KMnO4 binder, has been widely recognized for its ability to extend the shelf life of vegetables and fruits. This study was conducted to determine zeolites physico-chemical characters from different particle size and the effect on KMnO4 absorption. Potassium permanganate (KMnO4) is a strong oxidizer for reducing the quantity of ethylene in storage process of fresh horticultural products. The treatment consisted of (1) different length of milling time (10, 20, 30, 40, and 60 minutes) and (2) the duration of chemical activation with 1 N KOH solution. Physical and chemical characters of zeolite were analyzed using BET, PSA, XRD and SEM. The research design was randomized design. The result implied that milling time was significantly affecting the zeolite particle size, material surface area, and the size of pore diameter and volume. Milling treatment for 40 minutes produced higher zeolite surface area and pore volume than other treatments. While the duration of chemical activation using 1 N KOH solution gives different effect on zeolite absorption to KMnO4 solution. Milling time for 60 minutes and activated for 48 hours has higher initial adsorption than other treatments.

  8. Optimization of physico-chemical properties of gelatin extracted from fish skin of rainbow trout (Onchorhynchus mykiss).

    Science.gov (United States)

    Tabarestani, H Shahiri; Maghsoudlou, Y; Motamedzadegan, A; Mahoonak, A R Sadeghi

    2010-08-01

    Physico-chemical properties of gelatin extracted from rainbow trout (Onchorhynchus mykiss) skin were optimized using response surface methodology (RSM). Central rotatable composite design was applied to study the combined effects of NaOH concentration (0.01-0.21 N), acetic acid concentration (0.01-0.21 N) and pre-treatment time (1-3h) on yield, molecular weight distribution, gel strength, viscosity and melting point of gelatin. Regression models were developed to predict the variables. Predict values of multiple response at optimal condition were that yield=9.36%, alpha(1)/alpha(2) chain ratio=1.76, beta chain percent=32.81, gel strength=459 g, viscosity=3.2 mPa s and melting point=20.4 degrees C. The optimal condition was obtained using 0.19 N NaOH and 0.121 N acetic acid for 3h. The results showed that the concentration of H(+) during pre-treatment had significant effect on molecular weight distribution, melting point and gel strength. The concentration of OH(-) had significant effect on viscosity and for extraction yield, pretreatment time was the critical factor. (c) 2010 Elsevier Ltd. All rights reserved.

  9. Effect of pulsed electric fields on microbial inactivation and physico-chemical properties of whole porcine blood.

    Science.gov (United States)

    Boulaaba, Annika; Egen, Nathalie; Klein, Günter

    2014-04-01

    The objective of this study was to determine the lethal effectiveness of pulsed electric fields on the inactivation of the porcine blood endogenous microflora. Furthermore, the impact of pulsed electric field application on physico-chemical and sensory properties in this medium should be proved. Blood samples from a commercial abattoir in Germany were processed by a continuous pilot plant-pulsed electric field system at electric field strength of 11 kV/cm for treatment times of 163 and 209 µs. The applied pulse frequencies of 134 and 175 Hz correspond to an energy input of 91 and 114 kJ/kg, respectively. In these conditions, the effectiveness of pulsed electric field processing on microbial inactivation was limited: 1.35 log10 CFU/mL reduction of total aerobic plate count (p pulsed electric field-treated blood samples. Pulsed electric field processing leads to a complete hemolysis of the red blood cells, in addition significant decreased L* (lightness), a* (redness) and b* (yellowness) values (p < 0.0001) were observed. Furthermore, changes in the sensory attributes color (changed from red to dark brown) and odor (changed from fresh to musty and tangy) were noticed.

  10. Environmentally benign chemical synthesis and processing

    International Nuclear Information System (INIS)

    Hancock, K.G.

    1992-01-01

    A new era of university-industry-government partnership is required to address the intertwined problems of industrial economic competitiveness and environmental quality. Chemicals that go up the stacks and down the drains are simultaneously a serious detriment to the environment, a waste of natural resources, and a threat to industrial profitability. Recently, the NSF Divisions of Chemistry and chemical and Thermal Systems have joined with the Council for Chemical research in a new grant program to reduce pollution at the source by underwriting research aimed at environmentally benign chemical synthesis and processing. Part of a broader NSF initiative on environmental science research, this new program serves as a model for university-industry-government joint action and technology transfer. Other features of this program and related activities will be described in this paper

  11. Physico-chemical and structural characterization of mucilage isolated from seeds of Diospyros melonoxylon Roxb.

    Directory of Open Access Journals (Sweden)

    Sudarshan Singh

    2014-12-01

    Full Text Available Mucilage was isolated from the seeds of Diospyros melonoxylonRoxb., a plant growing naturally in the forests of India. Various physico-chemical methods like particle analysis, scanning electron microscopy, differential scanning calorimetry, differential thermal analysis, thermogravimetry analysis, molecular weight by gel permeation chromatography, rheometry, elemental analysis, x-ray diffraction spectrometry, zeta potential, fourier transform infrared spectroscopy, 1D(1H and 13C (NMR have been employed to characterize this gum in the present study. Particle analyses suggest that mucilage had particle size in nanometer. SEM analysis suggested that the mucilage had irregular particle size. The glass transition temperature of the gum observed was 78 °C and 74 °C by DSC and DTA respectively. The Thermogravimetry analysis suggested that mucilage had good thermal stability with two stage decomposition. The molecular weight of mucilage was determined to be 8760, by gel permeation chromatography, while the viscosity of mucilage was observed to be 219.1 cP. The XRD pattern of the mucilage indicated a complete amorphous nature. Elemental analysis of the gum revealed specific contents of carbon, hydrogen, nitrogen and sulfur. The major functional groups identified from FT-IR spectrum include 3441 cm-1 (-OH, 1632 cm-1 (-COO-, 1414 cm-1 (-COO- and 1219 cm-1 (-CH3CO. Analysis of mucilage by paper chromatography and 1D NMR indicated the presence of sugars.

  12. Cereal bar with added chayote peel flour: physico-chemical and sensory characteristics among children

    Directory of Open Access Journals (Sweden)

    Tatiane Wendler de Cristo

    2015-12-01

    Full Text Available The study aimed to verify the sensory acceptability of traditional cereal bars and cereal bars added with chayote peel flour, and determine the physico-chemical compositions of their formulations. Five cereal bars formulas were prepared and analyzed as follows: F1: standard (0% and with the addition of chayote peel flour in the proportions of 6.75% (F2; 13.5% (F3; 20.25% (F4 and 27% (F5. Sixty tasters, aged 7-10 took part in the sensorial analysis. There was no significant difference (p> 0.05 regarding appearance, aroma, texture and color among formulations. For the attributes taste, overall acceptance and purchase intention, higher scores were given towards the standard sample when compared to F5, but no differences were observed among the other sample scores. There was no statistical difference (p>0.05 for moisture, protein, fat and calories between F1 and F4 formulations. However, higher levels of ash and dietary fiber and lower level of carbohydrates were observed in F4 compared to F1. The formulas preparation demonstrated that a level of addition of up to 20.25% of chayote peel flour in cereal bars was well accepted by the panel, with a sensory acceptance similar to the standard product and good trading expectation.

  13. Effects of phosphorus and four tillage mulch systems on the physico ...

    African Journals Online (AJOL)

    Effects of phosphorus and four tillage mulch systems on the physico-chemical properties of an ultisol in Eastern Nigeria. ... Micro-porosity, macro-porosity, total porosity, mean weight diameter of water stable aggregates and saturated hydraulic conductivity, however, did not show significance. The infiltration rates of the TM, ...

  14. Golden flaxseed and its byproducts in beef patties: physico-chemical evaluation and fatty acid profile

    Directory of Open Access Journals (Sweden)

    Daiana Novello

    2013-09-01

    Full Text Available Flaxseed application in meat and meat products by adding not flesh ingredients has not yet been properly assessed. This technology strategy, if well optimized, could substantially improve the nutritional value of meat products and promote healthy appeals consistent. Knowing that, this study aimed to evaluate the effect of adding golden flaxseed oil, or flour, or seed in the physico-chemical properties and fatty acid profile of beef patties. Beef patties were prepared with 5.0% of oil (FO, or flour (FF, or seed (FS, plus a control formulation (FC. For raw products containing flaxseed, the moisture content (74.22 to 68.61% was decreased and the ash (1.61 to 2.00g 100g-1, protein (15.62 to 16.46g 100g-1, fat (6.20 to 9.74g 100g-1, carbohydrate (2.02 to 3.97 g 100g-1, and calorie (127.71 to 161.62kcal 100g-1 contents were increased. The raw and grilled samples containing golden flaxseed had increased beneficial omega-3 (n-3 fatty acids (0.85 a 2.98g 100g-1, a decreased n-6/n-3 ratio (0.50, thus improving the nutritional profile.

  15. Synthesis, physico-chemical and antimicrobial screening studies on 14 and 16-membered hexaazamacrocyclic complexes bearing pendant amine groups

    Directory of Open Access Journals (Sweden)

    Shakir Mohammad

    2006-01-01

    Full Text Available The synthesis and characterization of a series of 14 and 16-membered hexaazamacrocyclic complexes, which were obtained via template condensation of 1,2- diaminoethane or 1,3-diaminopropane, formaldehyde and hydrazine hydrate in the presence of first row transition metal salts are reported. Complexes of the types, [ML¹(NO32]; [CuL¹](NO32 and [ML²Cl2]; [CuL²]Cl2 (where M = Co(II, Ni(II and Zn(II, were obtained. Elemental analyses, IR spectra, ¹H NMR, EPR, UV-Vis, magnetic susceptibility and conductivity measurements have ascertained the overall geometry and stereochemistry of the complexes. An octahedral geometry has been suggested for all the complexes, except for copper compounds, in which the metal centre coordinates to the four nitrogen atoms of macrocyclic ligand in a square planar fashion. These complexes were screened against different fungi and bacteria in vitro and were found to be potentially active in the concentration 5 mg mL-1.

  16. Chemical Synthesis of Proanthocyanidins in Vitro and Their Reactions in Aging Wines

    Directory of Open Access Journals (Sweden)

    Qiu-Hong Pan

    2008-12-01

    Full Text Available Proanthocyanidins are present in many fruits and plant products like grapes and wine, and contribute to their taste and health benefits. In the past decades of years, substantial progresses has been achieved in the identification of composition and structure of proanthocyanidins, but the debate concerning the existence of an enzymatic or nonenzymatic mechanism for proanthocyanidin condensation still goes on. Substantial attention has been paid to elucidating the potential mechanism of formation by means of biomimetic and chemical synthesis in vitro. The present paper aims at summarizing the research status on chemical synthesis of proanthocyanidins, including non-enzymatic synthesis of proanthocyanidin precursors, chemical synthesis of proanthocyanidins with direct condensation of flavanols and stereoselective synthesis of proanthocyanidins. Proanthocyanidin-involved reactions in aging wines are also reviewed such as direct and indirect reactions among proanthocyanidins, flavanols and anthocyanins. Topics for future research in this field are also put forward in this paper.

  17. Physico-chemical changes of the ground waters related to the 2011 El Hierro magmatic reactivation

    Science.gov (United States)

    Dionis, S.; Melián, G.; Padrón, E.; Padilla, G.; Nolasco, D.; Rodríguez, F.; Hernández, I.; Peraza, D.; Barrancos, J.; Hernández, P.; Calvo, D.; Pérez, N.

    2012-04-01

    The island of El Hierro (278 Km2), is the smallest, the southwesternmost and the youngest island (˜1.12 My) of the Canarian archipelago. The main geological characteristics of El Hierro consist on the presence of three convergent ridges of volcanic cones on a truncated trihedron shape and giant landslides between the three rift zones, being the most recent El Golfo on the northwest flank of the island. On July 2011 an anomalous seismic activity at Hierro Island started and suggested the initial stage of a volcanic unrest in the volcanic system. On October 10, after the occurrence of more than 10,000 earthquakes, a submarine eruption started. Evidences of this submarine volcanic eruption were visible on the sea surface to the south of La Restinga village, at the south of the island, in the form of large light-green coloured area, turbulent gas emission and the appearance of steamy volcanic fragments three days later. As part of its volcanic surveillance activities, the Instituto Volcanologico de Canarias (INVOLCAN) started a hydrogeochemical monitoring program on August 2011 in order to evaluate the temporal evolution of several physico-chemical parameters of the ground water system of El Hierro. Four observation sites were selected: three wells on the north of the island, where the seismic activity was located at the beginning of the volcano-seismic unrest (SIMO, FRON and PADO) and one horizontal well (gallery) in the south (TACO). Ground water sampling is being regularly collected, three times per week, at each observation site, and in-situ measurements of pH, conductivity and temperature measurements are performed. After 6 month of monitoring, no significant changes have been observed on pH and temperature measurements from all the observation sites. However, clear sharp decrease of conductivity was observed at SIMO on October 10 when the seismic tremor started. In addition, the strongest conductivity decrease pattern was observed later on at SIMO and PADO on

  18. Crystallization characteristics and physico-chemical properties of glass–ceramics based on Li2O–ZnO–SiO2 system

    Directory of Open Access Journals (Sweden)

    Saad M. Salman

    2017-09-01

    Full Text Available Glass materials based on lithium zinc silicate system of the composition 24Li2O–20ZnO–56SiO2 LZS (mol% were prepared and converted to glass–ceramics using controlled heat-treatment schedules. The LZS base glass system was modified by addition of Al2O3 and MO/ZnO replacements where MO = CaO, CdO and SrO oxides. Several crystalline phases were developed, including lithium zinc orthosilicate, α-quartz, β-spodumene solid solution, lithium meta and disilicate, Ca-wollastonite, Cd or Sr metasilicate, and Sr-zinc silicate of hardystonite type. The effects of crystallization process on some properties, like thermal expansion coefficient (TEC, chemical stability, and density of glass–ceramics were evaluated. The TEC of crystalline samples varied from 72 × 10−7 to 149 × 10−7 K−1, 25–600 and density values in the range, 2.67–3.29 g/cm3. The addition of Al2O3 and MO/ZnO replacements in the base glass led to improve the chemical durability of the glass–ceramics samples. As a result of the thermal and physico-chemical properties of the studied glass–ceramic, the materials acquire excellent properties and can be used to seal a variety of different metals and alloys.

  19. Crystallization characteristics and physico-chemical properties of glass–ceramics based on Li2O–ZnO–SiO2 system

    International Nuclear Information System (INIS)

    Salman, Saad M.; Salama, Samia N.; Abo-Mosallam, Hany A.

    2017-01-01

    Glass materials based on lithium zinc silicate system of the composition 24Li2O–20ZnO–56SiO2 LZS (mol%) were prepared and converted to glass–ceramics using controlled heat-treatment schedules. The LZS base glass system was modified by addition of Al2O3 and MO/ZnO replacements where MO=CaO, CdO and SrO oxides. Several crystalline phases were developed, including lithium zinc orthosilicate, α-quartz, β-spodumene solid solution, lithium meta and disilicate, Ca-wollastonite, Cd or Sr metasilicate, and Sr-zinc silicate of hardystonite type. The effects of crystallization process on some properties, like thermal expansion coefficient (TEC), chemical stability, and density of glass–ceramics were evaluated. The TEC of crystalline samples varied from 72×10−7 to 149×10−7K−1, 25–600 and density values in the range, 2.67–3.29g/cm3. The addition of Al2O3 and MO/ZnO replacements in the base glass led to improve the chemical durability of the glass–ceramics samples. As a result of the thermal and physico-chemical properties of the studied glass–ceramic, the materials acquire excellent properties and can be used to seal a variety of different metals and alloys. [es

  20. Demonstration of the SOLTECR technology for the in situ physico-chemical treatment of a site contaminated by diesel oil

    International Nuclear Information System (INIS)

    Dufresne, P.; Tellier, J.G.; Michaud, J.R.

    1997-01-01

    The remediation of a diesel oil spill at one of the Alcan plants was discussed. The hydrocarbon spill affected the groundwater in an area of more than 6,000 m 2 . Only an in-situ treatment for remediation was practical because the residual contaminated soil was located mainly under buildings and represented a volume of 3,000 m 3 . Alcan proposed the development and demonstration of the SOLTEC R in-situ physico-chemical treatment technology which consists of injecting chemicals into the soil. The chemicals are a mixture of calcium based solids with liquid and gaseous oxidizing agents. The degradation of the hydrocarbons is by oxidation and is completed in the soil in less than 24 hours after injection. Monitoring of the groundwater was conducted for one year after the completion of the soil treatment. It was concluded that the SOLTEC R process decreased and even eliminated the toxicity and geotoxicity of the diesel-contaminated soils. A volume of 3,000 m 3 of contaminated soil was treated within three months. The efficiency of hydrocarbon destruction was more than 95 per cent. 3 refs., 1 tab

  1. Synthesis and characterization of magnetite nanoparticles coated with lauric acid

    Energy Technology Data Exchange (ETDEWEB)

    Mamani, J.B., E-mail: javierbm@einstein.br [Instituto do Cérebro-InCe, Hospital Israelita Albert Einstein-HIAE, 05651-901 São Paulo (Brazil); Costa-Filho, A.J. [Faculdade de Filosofia, Ciências e Letras de Ribeirão Preto, Universidade de São Paulo, Ribeirão Preto (Brazil); Cornejo, D.R. [Instituto de Física Universidade de São Paulo, USP, São Paulo (Brazil); Vieira, E.D. [Instituto de Física, Universidade Federal de Goiás, Goiânia (Brazil); Gamarra, L.F. [Instituto do Cérebro-InCe, Hospital Israelita Albert Einstein-HIAE, 05651-901 São Paulo (Brazil)

    2013-07-15

    Understanding the process of synthesis of magnetic nanoparticles is important for its implementation in in vitro and in vivo studies. In this work we report the synthesis of magnetic nanoparticles made from ferrous oxide through coprecipitation chemical process. The nanostructured material was coated with lauric acid and dispersed in aqueous medium containing surfactant that yielded a stable colloidal suspension. The characterization of magnetic nanoparticles with distinct physico-chemical configurations is fundamental for biomedical applications. Therefore magnetic nanoparticles were characterized in terms of their morphology by means of TEM and DLS, which showed a polydispersed set of spherical nanoparticles (average diameter of ca. 9 nm) as a result of the protocol. The structural properties were characterized by using X-ray diffraction (XRD). XRD pattern showed the presence of peaks corresponding to the spinel phase of magnetite (Fe{sub 3}O{sub 4}). The relaxivities r{sub 2} and r{sub 2}* values were determined from the transverse relaxation times T{sub 2} and T{sub 2}* at 3 T. Magnetic characterization was performed using SQUID and FMR, which evidenced the superparamagnetic properties of the nanoparticles. Thermal characterization using DSC showed exothermic events associated with the oxidation of magnetite to maghemite. - Highlights: • Synthesis of magnetic nanoparticles coated with lauric acid • Characterization of magnetic nanoparticles • Morphological, structural, magnetic, calorimetric and relaxometric characterization.

  2. Phytoecdysteroids and flavonoid glycosides among Chilean and commercial sources of Chenopodium quinoa: variation and correlation to physico-chemical characteristics.

    Science.gov (United States)

    Graf, Brittany L; Rojo, Leonel E; Delatorre-Herrera, Jose; Poulev, Alexander; Calfio, Camila; Raskin, Ilya

    2016-01-30

    Little is known about varietal differences in the content of bioactive phytoecdysteroids (PE) and flavonoid glycosides (FG) from quinoa (Chenopodium quinoa Willd.). The aim of this study was to determine the variation in PE and FG content among 17 distinct quinoa sources and identify correlations to genotypic (highland vs. lowland) and physico-chemical characteristics (seed color, 100-seed weight, protein content, oil content). PE and FG concentrations exhibited over four-fold differences across quinoa sources, ranging from 138 ± 11 µg g(-1) to 570 ± 124 µg g(-1) total PE content and 192 ± 24 µg g(-1) to 804 ± 91 µg g(-1) total FG content. Mean FG content was significantly higher in highland Chilean varieties (583.6 ± 148.9 µg g(-1)) versus lowland varieties (228.2 ± 63.1 µg g(-1)) grown under the same environmental conditions (P = 0.0046; t-test). Meanwhile, PE content was positively and significantly correlated with oil content across all quinoa sources (r = 0.707, P = 0.002; Pearson correlation). FG content may be genotypically regulated in quinoa. PE content may be increased via enhancement of oil content. These findings may open new avenues for the improvement and development of quinoa as a functional food. © 2015 Society of Chemical Industry.

  3. Effect of superfine grinding on the physico-chemical, morphological and thermogravimetric properties of Lentinus edodes mushroom powders.

    Science.gov (United States)

    Ming, Jian; Chen, Long; Hong, Hui; Li, Jinlong

    2015-09-01

    Lentinus edodes is an edible mushroom commonly known as shiitake, which is the second most produced and consumed edible mushroom in the world and is an important nutrient source in the human diet. To fully use L. edodes, the mushrooms are occasionally ground into powder as a flavourful and functional food additive. This study produces powders from the cap and stipe of Lentinus edodes mushrooms through superfine grinding. These powders are composed of sub-micron range particles with various size distributions. The superfine grinding process is then compared with shear pulverisation to determine the different effects on both the cap and stipe powders in terms of particle size and physico-chemical, morphological and thermogravimetric properties. When average particle size was reduced to 0.54 and 0.46 µm, respectively, the moisture and protein content, angles of repose and slide, and water holding capacity of the powders decreased to varied extents. However, soluble dietary fibre, water solubility index, and swelling capacity increased. Scanning electron microscope images suggested that the superfine grinding process effectively changed the original surface structure of the L. edodes powders. The curves of thermogravimetric analysis and those of the derivatives of thermogravimetry indicated that superfine grinding can improve the thermostability of L. edodes powders. Furthermore, superfinely ground L. edodes powders may be used as pharmaceutical or food additives in various fields. The present study suggests that superfinely ground L. edodes powders may be applied in various fields as pharmaceutical or food additives. © 2014 Society of Chemical Industry.

  4. A mobile sampler for mesuring the concentration of radionuclides and their physico chemical forms in natural waters

    International Nuclear Information System (INIS)

    Spezzano, P.; Giacomelli, R.; Bortoluzzi, S.; Montealto, M.; Nocente, M.

    1990-01-01

    This paper describes the realization of a sampler for concentrating radionuclides from large volume of natural waters with the purpose to determine their concentration levels and their physico-chemical forms. Sample is pumped at a flow rate of about 0.5 m 3 /h through a set of sequential filters with different pore sizes to achieve separation of 'particulate' from 'dissolved' forms. Filtered samples is then passed through sequential beds of cation and anion exchange resins and activated alumina to obtain separation of dissolved forms on the basis of their charge. Ammonium Hexacianocobalt Ferrate (NCFC is used as a selective exchanger for Cesium isotopes. Filter and exchangers are measured by computerized gamma spectrometry. Detection limits are of a few tenths of Bq per cubic meter of sample. The main results obtained during radioecological surveys are also presented

  5. Evaluation of microbial and physico-chemical qualities of some cough syrups marketed in Sana’a city, Yemen.

    Directory of Open Access Journals (Sweden)

    Ali G. Al−Kaf

    2015-08-01

    Full Text Available Context: Microbial contamination of cough syrups can bring clinical hazards to the users or patients as well as physical and chemical changes in the product. Aims: To evaluate the microbial and physicochemical characteristics of two hundred samples of four different types of cough syrups marketed in Sana’a city, Yemen. Methods: All collected samples were subjected to the following examinations: the total microbial count, type of isolated microorganisms, physical parameters, and concentration of active ingredients were identified and assessed by standard techniques described in US Pharmacopeia. Results: All the cough syrup samples used contained viable microbial load within acceptable limit according Pharmacopeia specifications. Bacillus subtilis, Micrococcus fulvum, and Staphylococcus epidermidis were the most commonly recovered bacteria. However, Aspergillus niger, Aspergillus fumigatus, Penicillium notatum, Mucor sp., and Aspergillus flavus were the most fungi isolated. The physical properties represented in the appearance, density, and pH of the analyzed samples complied with Pharmacopoeia standards. The concentrations of diphenhydramine HCl (92,51 – 108,78%, pseudoephedrine HCl (94,55 – 109,07%, and triprolidine HCl (98,20 – 104,19% were recorded. Conclusions: All cough syrups marketed in Sana’a City had good microbiological and physico-chemical qualities.

  6. Size-controlled synthesis of transition metal nanoparticles through chemical and photo-chemical routes

    Science.gov (United States)

    Tangeysh, Behzad

    The central objective of this work is developing convenient general procedures for controlling the formation and stabilization of nanoscale transition metal particles. Contemporary interest in developing alternative synthetic approaches for producing nanoparticles arises in large part from expanding applications of the nanomaterials in areas such as catalysis, electronics and medicine. This research focuses on advancing the existing nanoparticle synthetic routes by using a new class of polymer colloid materials as a chemical approach, and the laser irradiation of metal salt solution as a photo-chemical method to attain size and shape selectivity. Controlled synthesis of small metal nanoparticles with sizes ranging from 1 to 5nm is still a continuing challenge in nanomaterial synthesis. This research utilizes a new class of polymer colloid materials as nano-reactors and protective agents for controlling the formation of small transition metal nanoparticles. The polymer colloid particles were formed from cross-linking of dinegatively charged metal precursors with partially protonated poly dimethylaminoethylmethacrylate (PDMAEMA). Incorporation of [PtCl6]2- species into the colloidal particles prior to the chemical reduction was effectively employed as a new strategy for synthesis of unusually small platinum nanoparticles with narrow size distributions (1.12 +/-0.25nm). To explore the generality of this approach, in a series of proof-of-concept studies, this method was successfully employed for the synthesis of small palladium (1.4 +/-0.2nm) and copper nanoparticles (1.5 +/-0.6nm). The polymer colloid materials developed in this research are pH responsive, and are designed to self-assemble and/or disassemble by varying the levels of protonation of the polymer chains. This unique feature was used to tune the size of palladium nanoparticles in a small range from 1nm to 5nm. The procedure presented in this work is a new convenient room temperature route for synthesis of

  7. Development of new radioactive labelling methods (3H and 11C) in luteizing hormone (LH) and its releasing hormone (LRF). Study of physico-chemical properties of LRF by circular dichroism and emission spectroscopy

    International Nuclear Information System (INIS)

    Marche, Pierre.

    1975-01-01

    After a brief review of present knowledge on the hypothalamus-hypophysis this thesis falls into three parts. The first situates the peptide hormones studied in their biological context. Research on the radioactive labelling of hormonal peptides is dealt with in part two which includes, besides the application of already known tritiation methods to particular problems, the description of a new tritium labelling method and the use of carbon 11 for the kinetic distribution study of a hormone. Part three concerns the physico-chemical study of a hypothalamic hormone. As a contribution towards research on the hypophysary gonadotrophic function regulation, the work involved in all the above three sections was directed towards the luteinising hormone (LH) and its hypothalamic release factor (LRF). During the study of this latter the problem of peptides containing tryptophane arose and was consequently investigated [fr

  8. Determination of optimum harvest maturity and physico-chemical quality of Rastali banana (Musa AAB Rastali) during fruit ripening.

    Science.gov (United States)

    Kheng, Tee Yei; Ding, Phebe; Abdul Rahman, Nor Aini

    2012-01-15

    A series of physico-chemical quality (peel and pulp colours, pulp firmness, fruit pH, sugars and acids content, respiration rate and ethylene production) were conducted to study the optimum harvest periods (either week 11 or week 12 after emergence of the first hand) of Rastali banana (Musa AAB Rastali) based on the fruit quality during ripening. Rastali banana fruit exhibited a climacteric rise with the peaks of both CO(2) and ethylene production occurring simultaneously at day 3 after ripening was initiated and declined at day 5 when fruits entered the senescence stage. De-greening was observed in both of the harvesting weeks with peel turned from green to yellow, tissue softening, and fruits became more acidic and sweeter as ripening progressed. Sucrose, fructose and glucose were the main sugars found while malic, citric and succinic acids were the main organic acids found in the fruit. Rastali banana harvested at weeks 11 and 12 can be considered as commercial harvest period when the fruits have developed good organoleptic and quality attributes during ripening. However, Rastali banana fruit at more mature stage of harvest maturity taste slightly sweeter and softer with higher ethylene production which also means the fruits may undergo senescence faster than fruit harvested at week 11. Copyright © 2011 Society of Chemical Industry.

  9. Opportunities for Merging Chemical and Biological Synthesis

    Science.gov (United States)

    Wallace, Stephen; Balskus, Emily P.

    2014-01-01

    Organic chemists and metabolic engineers use largely orthogonal technologies to access small molecules like pharmaceuticals and commodity chemicals. As the use of biological catalysts and engineered organisms for chemical production grows, it is becoming increasingly evident that future efforts for chemical manufacture will benefit from the integration and unified expansion of these two fields. This review will discuss approaches that combine chemical and biological synthesis for small molecule production. We highlight recent advances in combining enzymatic and non-enzymatic catalysis in vitro, discuss the application of design principles from organic chemistry for engineering non-biological reactivity into enzymes, and describe the development of biocompatible chemistry that can be interfaced with microbial metabolism. PMID:24747284

  10. Temperature lowering in cryogenic chemical-synthesis techniques and system

    International Nuclear Information System (INIS)

    Martinez, H.E.; Nelson, T.O.; Vikdal, L.N.

    1993-01-01

    When evaluating a chemical synthesis process for a reaction that occurs on the cryogenically cooled walls, it is sometimes necessary to reduce the wall temperatures to enhance the chemical process. To evaluate the chemical process at lower than atmospheric boiling of liquid nitrogen, we built a system and used it to reduce the temperature of the liquid nitrogen. The technique of lowering the liquid nitrogen temperature by reducing the pressure of the boil-off is established knowledge. This paper presents the engineering aspects of the system, design features, equipment requirements, methods of control, and results of the chemical synthesis. The heat input to the system was ∼400 watts, placing a relatively large demand on the pumping system. Our system is a scale-up of the small laboratory experiment, and it provides the information needed to design an effective system. The major problem encountered was the large quantity of liquid escaping the system during the processing, placing a large gas load on the vacuum system

  11. Influence of activating solution and the addition of NaF on metakaolin-based geopolymer physico-chemical properties

    International Nuclear Information System (INIS)

    Agullo, J.; Muzeau, B.; Trepy, N.; L'Hostis, V.; Lambertin, D.

    2015-01-01

    The technology of geo-polymerisation is attracting a lot of interest due to the wide variety of potential applications. Recently emerging and alternative cementitious systems based on geo-polymers have been reported in literature. Geo-polymer materials have been proposed as new binders for safe radioactive waste containment. Moreover, their good fluidity and fire resistance make them compatible with industrial processes for embedding wastes. The purpose of this work was to investigate the physico-chemical properties of meta-kaolin-based geo-polymer which could be used as mineral binder for encapsulation of metallic nuclear wastes. To improve the knowledge of this binder, its microstructure and its interstitial solution have been characterized during hydration (up to 28 days). Interstitial solutions were extracted at different hydration time and subsequent analyses allow us to determine their chemical composition. pH measurements confirm the high alkalinity of the interstitial pore solution. The influence of the activating solution (NaOH or KOH) and the addition of NaF as corrosion inhibitor in the geo-polymer composition were also studied. The nature of different crystalline phases was identified by X-ray diffraction. Water accessible porosity for these materials was estimated around 59%. The pore size distribution was determined by mercury intrusion porosity. Alkaline cations have proved to induce changes in the pore size distribution, these ones coming from whether the activating solution or the NaF addition. (authors)

  12. [Physico-chemical features of dinitrosyl iron complexes with natural thiol-containing ligands underlying biological activities of these complexes].

    Science.gov (United States)

    Vanin, A F; Borodulin, R R; Kubrina, L N; Mikoian, V D; Burbaev, D Sh

    2013-01-01

    Current notions and new experimental data of the authors on physico-chemical features of dinitrosyl iron complexes with natural thiol-containing ligands (glutathione or cysteine), underlying the ability of the complexes to act as NO molecule and nitrosonium ion donors, are considered. This ability determines various biological activities of dinitrosyl iron complexes--inducing long-lasting vasodilation and thereby long-lasting hypotension in human and animals, inhibiting pellet aggregation, increasing red blood cell elasticity, thereby stimulating microcirculation, and reducing necrotic zone in animals with myocardial infarction. Moreover, dinitrosyl iron complexes are capable of accelerating skin wound healing, improving the function of penile cavernous tissue, blocking apoptosis development in cell cultures. When decomposed dinitrosyl iron complexes can exert cytotoxic effect that can be used for curing infectious and carcinogenic pathologies.

  13. Analysis of uranium and its correlation with some physico-chemical properties of drinking water samples from Amritsar, Punjab.

    Science.gov (United States)

    Singh, Surinder; Rani, Asha; Mahajan, Rakesh Kumar; Walia, Tejinder Pal Singh

    2003-12-01

    Fission track technique has been used for uranium estimation in drinking water samples collected from some areas of Amritsar District, Punjab, India. The uranium concentration in water samples is found to vary from 3.19 to 45.59 microg l(-1). Some of the physico-chemical properties such as pH, conductance and hardness and the content of calcium, magnesium, total dissolved solids (TDS), sodium, potassium, chloride, nitrate and heavy metals viz. zinc, cadmium, lead and copper have been determined in water samples. An attempt has been made to correlate uranium concentration with these water quality parameters. A positive correlation of conductance, nitrate, chloride, sodium, potassium, magnesium, TDS, calcium and hardness with uranium concentration has been observed. However, no correlation has been observed between the concentration of uranium and the heavy metals analysed.

  14. Laboratory modelling of the physico-chemical processes in the cosmic gas-dust clouds

    International Nuclear Information System (INIS)

    Bakulina, I.N.; Blashenkov, N.M.; Varshalovich, D.A.; Lavrent'ev, G.Ya.; Shustrov, B.N.

    1980-01-01

    The preliminary results of an experiment on the complex laboratory modelling of the physico-chemical processes proceeding in the interstellar gas clouds are presented. The purpose of the modelling is an analysis of the molecule formation and dissociation processes kinetics. The basic component of the modelling system is 10 cm diameter spherical container with cooled walls (the dust particles surface analogue). The high frequency discharger (the discharge region - the H 2 zone analogue) is placed in the central part of the container. The container contains the mixture of simple gases: 10 -1 Tor of H 2 and He, 10 -2 Tor of CO, O 2 and N 2 and 0.5x10 -2 Tor of H 2 S (an analogue of the H 1 zone). The reactions are induced by the electrodeless high-frequency discharge (f=20 MHz) with the discharge power of 0.1-1 W. The resulting mixture has been analyzed by the high-resolution magnetic resonance mass spectrometer. (M/ΔM=2x10 4 ) with an electron impact source. It is shown that, in the reactions of the formation of many on the interstellar molecules, the on the cold dust surface reactions rather than the gas-phase reactions may play the dominant role

  15. Synthesis and quality control of {sup 13}C-enriched urea for Helicobacter pylori (HP) diagnosis

    Energy Technology Data Exchange (ETDEWEB)

    Sant Ana Filho, Carlos R.; Tavares, Claudineia R.O.; Ferreira, Andre V.; Prestes, Cleber V.; Bendassolli, Jose A., E-mail: jab@cena.usp.br [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil)

    2013-08-01

    The aim of the study was to synthesize the urea ({sup 13}CO(NH{sub 2}){sub 2}), with 99% {sup 13}C atoms, and to perform a quality analysis for the diagnosis (breath test) of Helicobacter pylori. Furthermore, the process was submitted to economic analysis. The reaction was performed in a stainless steel reactor, lined with polytetrafluoroethylene, under low pressure and temperature. The synthesis method was shown to be appropriate (2.35 g; 81.9% yield), evidenced by physico-chemical and microbiological results, according to Brazilian legislation. The production and diagnosis costs were competitive compared with national and international market values, rendering this a valuable tool in clinical medicine. (author)

  16. Nafion-TiO2 composite DMFC membranes: physico-chemical properties of the filler versus electrochemical performance

    International Nuclear Information System (INIS)

    Baglio, V.; Arico, A.S.; Di Blasi, A.; Antonucci, V.; Antonucci, P.L.; Licoccia, S.; Traversa, E.; Fiory, F. Serraino

    2005-01-01

    TiO 2 nanometric powders were prepared via a sol-gel procedure and calcined at various temperatures to obtain different surface and bulk properties. The calcined powders were used as fillers in composite Nafion membranes for application in high temperature direct methanol fuel cells (DMFCs). The powder physico-chemical properties were investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and pH measurements. The observed characteristics were correlated to the DMFC electrochemical behaviour. Analysis of the high temperature conductivity and DMFC performance reveals a significant influence of the surface characteristics of the ceramic oxide, such as oxygen functional groups and surface area, on the membrane electrochemical behaviour. A maximum DMFC power density of 350 mW cm -2 was achieved under oxygen feed at 145 deg. C in a pressurized DMFC (2.5 bar, anode and cathode) equipped with TiO 2 nano-particles based composite membranes

  17. Influence of type of amphora on physico-chemical properties and antioxidant capacity of 'Falanghina' white wines.

    Science.gov (United States)

    Baiano, Antonietta; Varva, Gabriella; De Gianni, Antonio; Viggiani, Ilaria; Terracone, Carmela; Del Nobile, Matteo Alessandro

    2014-03-01

    The present research was aimed to evaluate the effects of ageing and type of container on physico-chemical indices and on antioxidant compounds of 'Falanghina' wines. Wines were stored for 12months in raw, glazed, and engobe amphorae, and in stainless steel tanks. Lactic, acetic, citric, succinic, and hydroxycinnamoyl tartaric acids, and the antioxidant capacity (DPPH assay) were not affected by the type of container for the duration of the ageing. Flavonoids decreased by about 85% in all the containers. The concentrations of flavans reactive with vanilline were reduced by 100% in raw and glazed amphorae, 23% in engobe amphorae, and 59% in stainless steel tanks. The hydroxycinnamoyl tartaric acids decreased by about 11% in raw and engobe amphorae and by ∼22% in glazed amphorae and in stainless steel tanks. During the whole ageing time, the decrease of the antioxidant capacity ranged from 28% (raw amphorae) to 43% (stainless steel tanks). Copyright © 2013 Elsevier Ltd. All rights reserved.

  18. Synthesis and physico-chemical property evaluation of PANI–NiFe{sub 2}O{sub 4} nanocomposite as electrodes for supercapacitors

    Energy Technology Data Exchange (ETDEWEB)

    Senthilkumar, B.; Vijaya Sankar, K. [Solid State Ionics and Energy Devices Laboratory, Department of Physics, Bharathiar University, Coimbatore 641046 (India); Sanjeeviraja, C. [School of Physics, Alagappa University, Karaikudi 630006, Tamil Nadu (India); Kalai Selvan, R., E-mail: selvankram@buc.edu.in [Solid State Ionics and Energy Devices Laboratory, Department of Physics, Bharathiar University, Coimbatore 641046 (India)

    2013-03-15

    Highlights: ► PANI–NiFe{sub 2}O{sub 4} composite prepared by in situ-chemical oxidative polymerization method. ► NP1 exhibits high SC (448 F/g) and energy density (50.4 Wh/kg) at 1 mA/cm{sup 2}. ► 80% of capacitance retained even after 1000 cycles at current density of 10 mA/cm{sup 2}. -- Abstract: Nanosized PANI–NiFe{sub 2}O{sub 4} composites were prepared by in situ-chemical oxidative polymerization method, whereas NiFe{sub 2}O{sub 4} was synthesized by solution combustion synthesis (SCS) technique. Structural, morphological and electrochemical properties of NiFe{sub 2}O{sub 4}, PANI and PANI–NiFe{sub 2}O{sub 4} composites were characterized by XRD, FT-IR, TGA, SEM, TEM, cyclic voltammetry, and galvanostatic charge–discharge techniques. The crystalline nature of NiFe{sub 2}O{sub 4} and PANI–NiFe{sub 2}O{sub 4} composites was elucidated by X-ray diffraction. FT-IR spectra inferred the polymerization of aniline and revealed the corresponding functional groups of PANI. Cyclic voltammetry and galvanostatic charge–discharge experiments were carried out to study the electrochemical capacitive properties. The PANI–NiFe{sub 2}O{sub 4} composites (NP1, NP2 and NP3) exhibited enhanced capacitive performance due to the increase in conducting network of PANI. The composite NP1 was provided higher SC of 448 F/g compared to PANI (292 F/g) and other PANI–NiFe{sub 2}O{sub 4} composites. For the sample NP1, maximum energy density of 50.4 Wh/kg was observed at a current density of 1 mA/cm{sup 2}. Above 80% of capacitance was maintained after 1000 cycles at a higher current density of 10 mA/cm{sup 2}. Hence, the prepared PANI–NiFe{sub 2}O{sub 4} composites can be used as suitable electrode materials for redox supercapacitors.

  19. Mineralogical and physico-chemical study of slags from municipal wastes incineration with a view to a use in road making technique; Etude mineralogique et physico-chimique des machefers d'incineration des ordures menageres (M.I.O.M.) en vue d'une utilisation en technique routiere

    Energy Technology Data Exchange (ETDEWEB)

    Delville, N.

    2003-01-01

    The evolution of waste management regulations now urges to valorize the slags resulting from municipal wastes incineration. However, their long-term environmental and mechanical behaviour is not always well-controlled and some reserve still exist about their use in roadway techniques. A mineralogical and physico-chemical characterization of the slags from Rosiers d'Egletons has been carried out in order to determine the way of formation of their constituents and to understand their nature and evolution. These slags, assimilated to a D{sub 22} soil-type, can be used as backfilling or foundation layer material but their hydric characteristics make their comparison with natural soils delicate. It is a siliceous material (50%) containing calcium (15%), aluminium (10%), iron (7%) and sodium (6%) and characterized by a significant enrichment in lead, copper and zinc (x 100) but showing a satisfactory behaviour with respect to leaching. Its chemical behaviour does not change much with seasons and remains close to other French and European slags coming from grid furnaces. It is made of 35% of relict phases, 40% of primary phases and 25% of secondary phases. The heavy metals are distributed in these three families and with various shapes. An experimental study of the primary phases has permitted to establish a model of crystallisation at the equilibrium to which any slag can be compared in order to know its conditions of making inside the furnace. The high temperature blending present in the Rosiers d'Egletons slags come from the partial fusion of the wastes but are equivalent to experimental blending and seems to crystallize in reductive conditions. An experimental roadway has been made with the Rosiers d'Egletons slag as foundation bed and followed up during two years in order to study the mineralogical, chemical and geo-technical evolution of the material. No deformation of the roadway has been noticed and a hardening seems to develop with time. No noxious

  20. Heavy metals and terrestrial cryptograms. A bibliographic synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Margot, J.; Romain, M.T.

    1976-01-01

    Heavy metals pollution is a present-day problem as it concerns the entire continent. Terrestrial cryptograms are not of long-standing use as bioindicators in this respect and require a synthesis of the recent publications. Characteristics of heavy metals in the atmosphere, especially mosses and lichens, utilizable as bioindicators are briefly reported. They are followed by more accurate descriptions of phenomena on the level with the plant itself: absorption, accumulation, translocation, tolerance and other physico-chemical processes. The statement of deleterious effects on these organisms is then given: external symptoms, cytological localization, metabolic disturbances and ecological aspects. Further research propositions are presented. 128 references.

  1. Synthesis and chemical recycling of high polymers using C1 compounds; C1 kagobutsu ni yoru kobunshi no chemical recycle

    Energy Technology Data Exchange (ETDEWEB)

    Masuda, T. [National Institute of Materials and Chemical Research, Tsukuba (Japan)

    1997-09-01

    The paper outlined a study of the synthesis of high polymers using C1 compounds which are continuously usable chemical materials and the related compounds such as the derivatives, and also the chemical recycle. In the case of waste plastics mixed in urban refuse, effective is the chemical recycle where C1 compounds obtained by gasifying the mixed waste are used as high polymer material. For the synthesis and recycle of high polymers using C1 compounds, there are three routes: Route A (recycle via high polymer materials), Route B (recycle via C1 compounds and high polymer materials), and Route C including global-scale carbon recycle (recycle via carbon dioxide from biodegradable plastics using microorganism). Among high polymers, those that can be synthesized from C1 compounds, for example, polymethylene, polyacetal and polyketone can be chemically recycled by Route B. 30 refs., 2 figs., 1 tab.

  2. Physico-chemical and optical properties of combustion-generated particles from coal-fired power plant, automobile and ship engine and charcoal kiln.

    Science.gov (United States)

    Kim, Hwajin

    2015-04-01

    Similarities and differences in physico-chemical and optical properties of combustion generated particles from various sources were investigated. Coal-fired power plant, charcoal kiln, automobile and ship engine were major sources, representing combustions of coal, biomass and two different types of diesel, respectively. Scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectroscopy (EDX) equipped with both SEM and HRTEM were used for physico-chemical analysis. Light absorbing properties were assessed using a spectrometer equipped with an integrating sphere. Particles generated from different combustion sources and conditions demonstrate great variability in their morphology, structure and composition. From coal-fired power plant, both fly ash and flue gas were mostly composed of heterogeneously mixed mineral ash spheres, suggesting that the complete combustion was occurred releasing carbonaceous species out at high temperature (1200-1300 °C). Both automobile and ship exhausts from diesel combustions show typical features of soot: concentric circles comprised of closely-packed graphene layers. However, heavy fuel oil (HFO) combusted particles from ship exhaust demonstrate more complex compositions containing different morphology of particles other than soot, e.g., spherical shape of char particles composed of minerals and carbon. Even for the soot aggregates, particles from HFO burning have different chemical compositions; carbon is dominated but Ca (29.8%), S (28.7%), Na(1%), and Mg(1%) are contained, respectively which were not found from particles of automobile emission. This indicates that chemical compositions and burning conditions are significant to determine the fate of particles. Finally, from biomass burning, amorphous and droplet-like carbonaceous particles with no crystallite structure are observed and they are generally formed by the condensation of low volatile species at low

  3. Abstracts of the 2.Regional Meeting on Chemistry

    International Nuclear Information System (INIS)

    1984-01-01

    Abstracts of experimental works are presented, mainly involving: synthesis and characterization of organic compounds and metal complexes, studies about kinetic and other physico-chemical parameters, the utilization of nuclear techniques for the analysis of minerals and chemical compounds. (C.L.B.) [pt

  4. Physico-chemical characteristics of activated carbons based on a copolymer of furfural and mineral raw materials of the Republic of Kazakhstan and their application in extracting gold from industrial solutions

    Directory of Open Access Journals (Sweden)

    Kanagat Kishibayev

    2013-09-01

    Full Text Available Activated carbons are widely used in different industries for cleaning a variety of natural objects from of technogenic pollutants. In the article presents the results of physico-chemical investigations of activated carbons. The investigations on the sorption of gold in cyanide solutions activated sorbent based on furfural and sorbent based on shungit.

  5. Layer-by-layer buildup of polysaccharide-containing films: Physico-chemical properties and mesenchymal stem cells adhesion.

    Science.gov (United States)

    Kulikouskaya, Viktoryia I; Pinchuk, Sergei V; Hileuskaya, Kseniya S; Kraskouski, Aliaksandr N; Vasilevich, Irina B; Matievski, Kirill A; Agabekov, Vladimir E; Volotovski, Igor D

    2018-03-22

    Layer-by-Layer assembled polyelectrolyte films offer the opportunity to control cell attachment and behavior on solid surfaces. In the present study, multilayer films based on negatively charged biopolymers (pectin, dextran sulfate, carboxymethylcellulose) and positively charged polysaccharide chitosan or synthetic polyelectrolyte polyethyleneimine has been prepared and evaluated. Physico-chemical properties of the formed multilayer films, including their growth, morphology, wettability, stability, and mechanical properties, have been studied. We demonstrated that chitosan-containing films are characterized by the linear growth, the defect-free surface, and predominantly viscoelastic properties. When chitosan is substituted for the polyethyleneimine in the multilayer system, the properties of the formed films are significantly altered: the rigidity and surface roughness increases, the film growth acquires the exponential character. The multilayer films were subsequently used for culturing mesenchymal stem cells. It has been determined that stem cells effectively adhered to chitosan-containing films and formed on them the monolayer culture of fibroblast-like cells with high viability. Our results show that cell attachment is a complex process which is not only governed by the surface functionality because one of the key parameter effects on cell adhesion is the stiffness of polyelectrolyte multilayer films. We therefore propose our Layer-by-Layer films for applications in tissue engineering. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2018. © 2018 Wiley Periodicals, Inc.

  6. Chemical investigation of the effluents of selected chemical industries in NWFP (Pakistan)

    International Nuclear Information System (INIS)

    Jan, M.R.; Shah, J.; Shah, H.

    2002-01-01

    Samples of effluents were collected from the waste water drains of selected chemical industries, located at small industries estate Kohat Road Peshawar on monthly basis from November 1994 to October 1995. These samples were studied for physico chemical properties and heavy metals like Pb, Ag, Cu, Zn, Fe, Cr, Cd, Mn and Ni using spectroscopic techniques. The results of our investigation are presented and discussed. (author)

  7. Physico-chemical Properties and Assessment of Edible Oil Potential of Peanuts Grown in Kurram Agency, Parachinar

    Directory of Open Access Journals (Sweden)

    Rahib Hussain

    2015-06-01

    Full Text Available This study was carried out to investigate the oil potential of peanuts for domestic and commercial uses. Peanut oil yield and the physico-chemical properties of extracted oil were investigated on different temperatures (50, 55, 60 and 65 °C and sun drying. Results showed maximum oil yield of 47.2 % at sun drying and lowest values of 37.0 % at 65 °C. Highest and lowest acid values are 25.52 and 5.89 mg/KOH/g at 60 °C and 50 °C respectively. The Free Fatty Acid (FFA content were obtained 12.76 and 2.94 mg/g at 60 °C and 50 °C, while saponification values were 61.71 and 32.25 mg/KOH/g at 60 °C and 50 °C respectively. The highest Peroxide value of 92 mg/KOH/g was recorded at 55 °C which dropped to 43.4 mg/KOH/g at 65 °C. Refractive index (RI and density were not changed significantly (p≤0.05 on all temperatures, while pH was somewhat higher on 50 °C. The moisture content was found lowest up to 3.0 % on 65 °C while highest was 5 % on 50 °C.

  8. Physico-chemical properties and assessment of adible oil potential of peanuts grown in kurram agency, parachinar

    International Nuclear Information System (INIS)

    Hussain, R.; Sattar, S.; Zeb, M.

    2015-01-01

    This study was carried out to investigate the oil potential of peanuts for domestic and commercial uses. Peanut oil yield and the physico-chemical properties of extracted oil were investigated on different temperatures (50, 55, 60 and 65 degree C) and sun drying. Results showed maximum oil yield of 47.2 % at sun drying and lowest values of 37.0 % at 65 degree C. Highest and lowest acid values are 25.52 and 5.89 mg/KOH/g at 60 degree C and 50 degree C respectively. The Free Fatty Acid (FFA) content were obtained 12.76 and 2.94 mg/g at 60 degree C and 50 degree C, while saponification values were 61.71 and 32.25 mg/KOH/g at 60 degree C and 50 degree C respectively. The highest Peroxide value of 92 mg/KOH/g was recorded at 55 degree C which dropped to 43.4 mg/KOH/g at 65 degree C. Refractive index (RI) and density were not changed significantly (p<=0.05) on all temperatures, while pH was somewhat higher on 50 degree C. The moisture content was found lowest up to 3.0 % on 65 degree C while highest was 5 % on 50 degree C. (author)

  9. Effects of electron beam irradiation on tribological and physico-chemical properties of Polyoxymethylene copolymer (POM-C)

    Energy Technology Data Exchange (ETDEWEB)

    Rahman, Md. Shahinur; Shaislamov, Ulugbek; Yang, Jong-Keun [Nuclear Fusion and Plasma Applications Laboratory, Department of Nuclear and Energy Engineering, Jeju National University, 102 Jejudaehak-ro, Jeju-si, Jeju 63243 (Korea, Republic of); Kim, Jong-Kuk [Plasma Processing Laboratory, Division of Surface Technology, Korea Institute of Materials Science, 797 Changwondaero, Sungsan-Gu, Changwon, Kyungnam 641-010 (Korea, Republic of); Yu, Young Hun [Department of Physics, Jeju National University, 102 Jejudaehak-ro, Jeju-si, Jeju 63243 (Korea, Republic of); Choi, Sooseok [Nuclear Fusion and Plasma Applications Laboratory, Department of Nuclear and Energy Engineering, Jeju National University, 102 Jejudaehak-ro, Jeju-si, Jeju 63243 (Korea, Republic of); Lee, Heon-Ju, E-mail: hjlee@jejunu.ac.kr [Nuclear Fusion and Plasma Applications Laboratory, Department of Nuclear and Energy Engineering, Jeju National University, 102 Jejudaehak-ro, Jeju-si, Jeju 63243 (Korea, Republic of)

    2016-11-15

    Highlights: • Electron beam dose irradiation effect on tribology of POM-C was investigated. • Raman and FTIR-ATR spectra confirm the chemical structural modification. • 1 MeV, 100 kGy dose irradiation induced well suited carbonization and hydrophobicity. • Well suited carbonization and hydrophobicity reduced friction coefficient. - Abstract: Polyoxymethylene copolymer (POM-C) is an attractive and widely used engineering thermoplastic across many industrial sectors owing to outstanding physical, mechanical, self-lubricating and chemical properties. In this research work, the POM-C blocks were irradiated with 1 MeV electron beam energy in five doses (100, 200, 300, 500 and 700 kGy) in vacuum condition at room temperature. The tribological and physico-chemical properties of electron beam irradiated POM-C blocks have been analyzed using pin on disk tribometer, Raman spectroscopy, FTIR-ATR, gel content analysis, SEM-EDS (scanning electron microscopy-energy dispersive spectroscopy), surface profiler and contact angle analyzer. Electron beam irradiation at a dose of 100 kGy resulted in decrease of the friction coefficient of POM-C block due to well suited carbonization, cross-linking, free radicals formation and partial physical modification. It also showed the lowest surface roughness and highest water contact angle among all unirradiated and irradiated POM-C blocks. The irradiation dose at 200 kGy resulted in increase of friction coefficient due to less effective cross-linking, but the irradiation doses at 300, 500 and 700 kGy resulted in increase of the friction coefficient as compared to unirradiated POM-C block due to severe chain scission, chemical and physical structural degradation. The degree of improvement for tribological attribute relies on the electron beam surface dose delivered (energy and dose rate).

  10. Influence of the physico-chemical process as previous treatment to the electrocoagulation. Study with leachate of a landfill; Influencia del proceso fisicoquimico como tratamiento previo a la electrocoagulacion. Estudio con lixiviados de un relleno

    Energy Technology Data Exchange (ETDEWEB)

    Mercado Martinez, I. D.; Reyes Avila, D.

    2007-07-01

    This article has as purpose to show the influence of the method physico-chemical as previous process to the novel technique of electrocoagulation, presenting as a new alternative to depurate wastewaters. to obtain it, was done tests measuring the very parameters to leachates so much affluent as effluent from treatment plant of the Sanitary Landfill La Esmeralda, situated near to the Manizales city(Colombia), and so much before as later to apply this electrochemical technology, looking for this way to compare the obtained removals. (Author)

  11. Influence of the Synthesis Method for Pt Catalysts Supported on Highly Mesoporous Carbon Xerogel and Vulcan Carbon Black on the Electro-Oxidation of Methanol

    Directory of Open Access Journals (Sweden)

    Cinthia Alegre

    2015-03-01

    Full Text Available Platinum catalysts supported on carbon xerogel and carbon black (Vulcan were synthesized with the aim of investigating the influence of the characteristics of the support on the electrochemical performance of the catalysts. Three synthesis methods were compared: an impregnation method with two different reducing agents, sodium borohydride and formic acid, and a microemulsion method, in order to study the effect of the synthesis method on the physico-chemical properties of the catalysts. X-ray diffraction and transmission electron microscopy were applied. Cyclic voltammetry and chronoamperometry were used for studying carbon monoxide and methanol oxidation. Catalysts supported on carbon xerogel presented higher catalytic activities towards CO and CH3OH oxidation than catalysts supported on Vulcan. The higher mesoporosity of carbon xerogel was responsible for the favored diffusion of reagents towards catalytic centers.

  12. Growth and physico-chemical properties of interconnected carbon nanotubes in FeSBA-15 mesoporous molecular sieves

    Directory of Open Access Journals (Sweden)

    Ulka Suryavanshi

    2016-03-01

    Full Text Available Carbon nanotubes (CNTs with well-defined hollow interiors, and different morphologies have been grown inside the nanochannels of iron substituted SBA-15 (Santa Barbara Amorphous with different iron contents and well-ordered large mesopores by chemical vapour deposition method. This novel method requires only 3 min for the formation of high quality multiwalled CNTs inside the SBA-15. The physico-chemical characteristics of the prepared CNT/Fe-SBA-15 nanocomposite have been analysed with powder X-ray diffraction (XRD, scanning electron microscopy (SEM, Raman spectroscopy and thermogravimetric analysis (TGA. XRD, Raman spectroscopy and TGA results confirm that the formed CNTs in SBA-15 nanochannels are highly pure and graphitic in nature, which can be altered by tuning the Fe content in the support matrix. SEM images show the interconnected network of SBA-15/CNT where CNT bridges the neighbouring SBA-15 nanoparticles. Interestingly, spring like CNTs and multi-terminal junctions such as Y and H junctions were also observed. The morphology of the CNTs inside the nanochannels of the SBA-15 support can also be controlled by the simple adjustment of the iron content in the SBA-15 framework. It has also been found that the content of Fe in the silica framework of SBA-15 plays a significant role in the formation of the CNTs and the amount of deposited CNTs in the nanochannels of SBA-15 increased with increasing the concentration of iron in framework. Among the materials studied, the FeSBA-15 with the nSi/nFe ratio of 2 showed the highest catalytic activity towards the formation of high quality CNTs.

  13. A lucrative chemical processing of bamboo leaf biomass to synthesize biocompatible amorphous silica nanoparticles of biomedical importance

    Science.gov (United States)

    Rangaraj, Suriyaprabha; Venkatachalam, Rajendran

    2017-06-01

    Synthesis of silica nanoparticles from natural resources/waste via cost effective route is presently one of the anticipating strategies for extensive applications. This study reports the low-cost indigenous production of silica nanoparticles from the leftover of bamboo (leaf biomass) through thermal combustion and alkaline extraction, and examination of physico-chemical properties and yield percentage using comprehensive characterization tools. The outcome of primed silica powder exhibits amorphous particles (average size: 25 nm) with high surface area (428 m2 g-1) and spherical morphology. Despite the yield percentage of silica nanoparticles from bamboo leave ash is 50.2%, which is less than rice husk ask resources (62.1%), the bamboo waste is only an inexpensive resource yielding high purity (99%). Synthesis of silica nanoparticles from natural resources/waste with the help of lucrative route is at present times one of the anticipating strategies for extensive applications. In vitro study on animal cell lines (MG-63) shows non-toxic nature of silica nanoparticles up to 125 µg mL-1. Hence, this study highlights the feasibility for the mass production of silica nanoparticles from bamboo leave waste rather using chemical precursor of silica for drug delivery and other medical applications.

  14. Graphene: chemical approaches to the synthesis and modification

    Energy Technology Data Exchange (ETDEWEB)

    Grayfer, E D; Makotchenko, V G; Nazarov, Albert S; Kim, S J; Fedorov, Vladimir E

    2011-08-31

    Published data on the new carbon nanomaterial, graphene, are described systematically from the chemist's standpoint. The attention is focused on the chemical methods of the synthesis of graphene-like materials from various precursors: natural and expanded graphite, graphite oxide, graphite intercalation compounds, etc. Approaches to the chemical modification of the graphene plane by various reagents and routes for the preparation of colloidal dispersions of graphene are considered. The bibliography includes 220 references.

  15. Chemical synthesis, characterization studies and reactivity of a catalytic material based on ZrO2-H3PW12O40

    International Nuclear Information System (INIS)

    Hernandez Enriquez, Juan Manuel; Garcia Alamilla, Ricardo; Paramo Garcia, Ulises; Rodrigo, Rebeca Silva; Garcia Serrano, Luz Arcelia

    2013-01-01

    In this work, the preparation and characterization of materials such as zirconium oxide (ZrO 2 ) and phosphotungstic acid promoted zirconium oxide (ZrO 2 -H 3 PW 12 O 40 ) is presented. Physico-chemical characterization results showed that addition of H 3 PW 12 O 40 acted as both a textural and chemical promoter of zirconium oxide. The incorporation of phosphotungstic acid into the ZrO 2 matrix delayed the sintering of the material and stabilized ZrO 2 in the tetragonal phase. ZrO 2 acidity was also enhanced, developing strong acid sites on its surface. The Pt/ZrO 2 -H 3 PW 12 O 40 catalyst was active for n-pentane isomerization at 250 deg C, exhibiting high selectivity to iso-pentane (95%). This result is probably due to its suitable acidity (author)

  16. Alternate fuels and chemicals from synthesis gas: Vinyl acetate monomer. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Richard D. Colberg; Nick A. Collins; Edwin F. Holcombe; Gerald C. Tustin; Joseph R. Zoeller

    1999-01-01

    There has been a long-standing desire on the part of industry and the U.S. Department of Energy to replace the existing ethylene-based vinyl acetate monomer (VAM) process with an entirely synthesis gas-based process. Although there are a large number of process options for the conversion of synthesis gas to VAM, Eastman Chemical Company undertook an analytical approach, based on known chemical and economic principles, to reduce the potential candidate processes to a select group of eight processes. The critical technologies that would be required for these routes were: (1) the esterification of acetaldehyde (AcH) with ketene to generate VAM, (2) the hydrogenation of ketene to acetaldehyde, (3) the hydrogenation of acetic acid to acetaldehyde, and (4) the reductive carbonylation of methanol to acetaldehyde. This report describes the selection process for the candidate processes, the successful development of the key technologies, and the economic assessments for the preferred routes. In addition, improvements in the conversion of acetic anhydride and acetaldehyde to VAM are discussed. The conclusion from this study is that, with the technology developed in this study, VAM may be produced from synthesis gas, but the cost of production is about 15% higher than the conventional oxidative acetoxylation of ethylene, primarily due to higher capital associated with the synthesis gas-based processes.

  17. Tectonic uplift and denudation rate influence soil chemical weathering intensity in a semi-arid environment, southeast Spain: physico-chemical and mineralogical evidence

    Science.gov (United States)

    Ameijeiras-Mariño, Yolanda; Opfergelt, Sophie; Schoonejans, Jérôme; Vanacker, Veerle; Sonnet, Philippe; Delmelle, Pierre

    2015-04-01

    Tectonic uplift is known to influence denudation rates. Denudation, including chemical weathering and physical erosion, affects soil production rates and weathering intensities. At topographic steady state, weathering can be transport- or weathering-limited. In the transport-limited regime, low denudation rates should lead to comparatively high weathering intensities, while in the weathering-limited case high denudation rates are associated with lower weathering intensities. Here, we test if this relationship applies to semi-arid environments where chemical weathering is generally slow. Three catchments (EST, FIL and CAB) were studied in the Internal Zone of the Betic Cordillera in southeast Spain, spanning a range of increasing uplift rates (10-170 mm/kyr) and increasing denudation rates (20-250 mm/kyr) from EST to CAB. In each catchment, two ridgetop soil profiles were sampled down to the bedrock. The three catchments have similar vegetation and climatic conditions, with precipitation of 250- 315 mm/yr and mean annual temperature of 15-17 °C. The mineralogy of the bedrock, as determined by XRD, is similar across the three catchments and is characterized by the presence of quartz, muscovite, clinochlore, biotite and plagioclase. This primary mineral assemblage is also found in the catchment soils, indicating that the soils studied derive from the same parent material. The soil clay-size fraction is dominated by kaolinite, vermiculite and illite. However, the proportions of the soil primary and secondary minerals vary between the catchment sites. The abundance of biotite decreases from CAB (14%) to EST (4%), whereas the quartz and clay contents show an opposite tendency (from 30 to 69% and 9.9 to 14.3%, respectively). Further, the abundance of vermiculite increases from CAB to EST. The results are interpreted in terms of increasing weathering intensity from CAB to EST by weathering of biotite into vermiculite and enrichment of soils on more weathering resistant

  18. Tensile properties of cooked meat sausages and their correlation with texture profile analysis (TPA) parameters and physico-chemical characteristics.

    Science.gov (United States)

    Herrero, A M; de la Hoz, L; Ordóñez, J A; Herranz, B; Romero de Ávila, M D; Cambero, M I

    2008-11-01

    The possibilities of using breaking strength (BS) and energy to fracture (EF) for monitoring textural properties of some cooked meat sausages (chopped, mortadella and galantines) were studied. Texture profile analysis (TPA), folding test and physico-chemical measurements were also performed. Principal component analysis enabled these meat products to be grouped into three textural profiles which showed significant (p<0.05) differences mainly for BS, hardness, adhesiveness and cohesiveness. Multivariate analysis indicated that BS, EF and TPA parameters were correlated (p<0.05) for every individual meat product (chopped, mortadella and galantines) and all products together. On the basis of these results, TPA parameters could be used for constructing regression models to predict BS. The resulting regression model for all cooked meat products was BS=-0.160+6.600∗cohesiveness-1.255∗adhesiveness+0.048∗hardness-506.31∗springiness (R(2)=0.745, p<0.00005). Simple linear regression analysis showed significant coefficients of determination between BS (R(2)=0.586, p<0.0001) versus folding test grade (FG) and EF versus FG (R(2)=0.564, p<0.0001).

  19. Physico-chemical analyses of Hispano-Moresque lustred ceramic: a precursor for Italian majolica?

    Science.gov (United States)

    Chabanne, D.; Bouquillon, A.; Aucouturier, M.; Dectot, X.; Padeletti, G.

    2008-07-01

    The paper presents a comprehensive physico-chemical investigation on a series of Hispano-Moresque objects produced in the eastern Spain workshops between the XIV and XVIII centuries and fragments from XII century, in order to compare them with the Italian Renaissance majolica production. The techniques used are mainly non-destructive (ion beam analyses and X-ray diffraction), sometimes complemented by SEM observation and microanalysis, and electrothermal atomic emission spectrometry. Such methods allow a full description of the terra cotta, of the glaze and of the different surface layers which constitute the lustre decoration indicating individual elemental composition and thickness of each layer containing or not metallic nanoparticles. Principal results show the following: i) a constant source of supply for the eastern Spain terra cotta; ii) a significant change in the composition of the Spanish glazes around the XVII century, with the disappearance of the opacifying tin oxide addition; iii) significant evolutions in the structure and composition of the lustre layers, in particular related to the presence or not of a metal-free surface glaze film and its thickness; iv) interesting analogies and differences with the Italian majolica; v) confirmation of the change in the quality of blue pigment during XVI century, already evidenced by the authors in previous publications. A discussion about the transmission of the lustre technique between eastern Spain and Italy at the Renaissance period is proposed.

  20. Anti-biofilm potential of phenolic acids: the influence of environmental pH and intrinsic physico-chemical properties.

    Science.gov (United States)

    Silva, Sara; Costa, Eduardo M; Horta, Bruno; Calhau, Conceição; Morais, Rui M; Pintado, M Manuela

    2016-09-13

    Phenolic acids are a particular group of small phenolic compounds which have exhibited some anti-biofilm activity, although the link between their activity and their intrinsic pH is not clear. Therefore, the present work examined the anti-biofilm activity (inhibition of biomass and metabolic activity) of phenolic acids in relation to the environmental pH, as well as other physico-chemical properties. The results indicate that, while Escherichia coli was not inhibited by the phenolic acids, both methicillin resistant Staphylococcus aureus and methicillin resistant Staphylococcus epidermidis were susceptible to the action of all phenolic acids, with the pH playing a relevant role in the activity: a neutral pH favored MRSE inhibition, while acidic conditions favored MRSA inhibition. Some links between molecular polarity and size were associated only with their potential as metabolic inhibitors, with the overall interactions hinting at a membrane-based mechanism for MRSA and a cytoplasmic effect for MRSE.

  1. Model for melt blockage (slug) relocation and physico-chemical interactions during core degradation under severe accident conditions

    International Nuclear Information System (INIS)

    Veshchunov, M.S.; Shestak, V.E.

    2008-01-01

    The model describing massive melt blockage (slug) relocation and physico-chemical interactions with steam and surrounding fuel rods of a bundle is developed on the base of the observations in the CORA tests. Mass exchange owing to slug oxidation and fuel rods dissolution is described by the previously developed 2D model for the molten pool oxidation. Heat fluxes in oxidising melt along with the oxidation heat effect at the melt relocation front are counterbalanced by the heat losses in the surrounding media and the fusion heat effect of the Zr claddings attacked by the melt. As a result, the slug relocation velocity is calculated from the heat flux matches at the melt propagation front (Stefan problem). A numerical module simulating the slug behaviour is developed by tight coupling of the heat and mass exchange modules. The new model demonstrates a reasonable capability to simulate the main features of the massive slug behaviour observed in the CORA-W1 test

  2. Improvement on the concentrated grape juice physico-chemical characteristics by an enzymatic treatment and Membrane Separation Processes

    Directory of Open Access Journals (Sweden)

    PLÍNIO R.F. CAMPOS

    2016-03-01

    Full Text Available ABSTRACT In this work, the improvement on the concentrated grape juice physico-chemical characteristics by using an enzymatic treatment followed by Membrane Separation Process (MSP has been investigated. By using Novozym 33095(r and Ultrazym AFP L(r enzymes varying three operating parameters, the best result on the grape pulp characteristics was attained for the Novozym 33095(r performed at 35oC, 15 min. and 50 mgL-1. In micro/ultra filtration processes after enzymatic pretreatment, the best performance of the MSP with high permeate flux value and suitable grape juice characteristics was attained using 0.05 mm membrane pore size, 1 bar pressure and 40 oC treatment temperature. When reverse osmosis process is operated at 40 bar and 40oC, high soluble solid and low turbidity values are attained. An enzymatic treatment along with MSP has shown an alternative and efficient grape juice processing system, being possible to extend to other foods.

  3. Effect of physico-chemical starch properties on bread quality and ageing (model study)

    International Nuclear Information System (INIS)

    Gambus, H.

    1997-01-01

    Wheat, rye and triticale starches, both native and those subjected to: segregation according to small granules (type B) and the large ones (type A), defatting with n-propanol and NaOH solution and irradiation by gamma rays at doses 3 and 5 kGy, as well as oat starch were analysed to determine their basic physico-chemical properties. Then all these starches were used in test with baking model pup loaves (40 g) from artificially composed flour, according to starch-gluten system based on recipe (for 4 pup loaves): 80 g starch d.m., 20 g dry vital gluten d.m., 8 g sugar, 3 g salt, 1 g yeast and 70 cm 3 water at 30 o C. Starch was the only alternative component in baking recipes. Additionally, wheat breads of 250 g were baked, in which part of flour was replaced by wheat and triticale starch fraction of large granules, irradiated rye and wheat starches, as well as by oat starch. Pup loaves and 250 g-loaves were evaluated on the day baking and during 3-day storage. Following parameters were determined: volume, penetration and crumb moisture and content of dry matter in crust. Also, sensory scores were performed. In addition, every day water extract from the pup loaves crumbs was prepared and in it dry matter and blue value as an indicator of soluble amylose were determined as well as carbohydrate substances were identified according to molecular mass using gel chromatography. Based on the results obtained negative effects of small starch granules and of a supplement of oat starch on bread quality were found, in spite of a beneficial effect of fatty substances contained in it, on retardation of the crumb hardening process. Also, a positive share of starch phospholipids was ascertained, not only in the retardation of amylose retrogradation but also in stabilization of crumb pores. It was observed that intensity of amylose retrogradation in crumb is determined by both the content of fatty substances in starch granules and the ratio of bound water by starch and protein

  4. Room temperature chemical synthesis of Cu(OH)2 thin films for supercapacitor application

    International Nuclear Information System (INIS)

    Gurav, K.V.; Patil, U.M.; Shin, S.W.; Agawane, G.L.; Suryawanshi, M.P.; Pawar, S.M.; Patil, P.S.; Lokhande, C.D.; Kim, J.H.

    2013-01-01

    Highlights: •Cu(OH) 2 is presented as the new supercapacitive material. •The novel room temperature method used for the synthesis of Cu(OH) 2 . •The hydrous, nanograined Cu(OH) 2 shows higher specific capacitance of 120 F/g. -- Abstract: Room temperature soft chemical synthesis route is used to grow nanograined copper hydroxide [Cu(OH) 2 ] thin films on glass and stainless steel substrates. The structural, morphological, optical and wettability properties of Cu(OH) 2 thin films are studied by means of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), UV–vis spectrophotometer and water contact angle measurement techniques. The results showed that, room temperature chemical synthesis route allows to form the nanograined and hydrophilic Cu(OH) 2 thin films with optical band gap energy of 3.0 eV. The electrochemical properties of Cu(OH) 2 thin films are studied in an aqueous 1 M NaOH electrolyte using cyclic voltammetry. The sample exhibited supercapacitive behavior with 120 F/g specific capacitance

  5. Study physico-chemical of the sand of the western ERG (Western South Algeria)

    Energy Technology Data Exchange (ETDEWEB)

    Allam, M.; Tafraoui, A. [Faculty of sciences and technology, University of Bechar (Algeria)], email: allammessaouda@yahoo.fr

    2011-07-01

    Silica is gaining increasing importance as it is the base for the production of pure silicon, for which several applications are under development in the electronic and solar energy sectors. The aim of this study is to characterize the sand taken from the Western Erg of Algeria to determine the percentage of silicon it contains. Characterization was done through physical analysis to determine the granulometry of the sand. A chemical analysis was next performed, using diffraction of X-rays and a scanning electron microscope to determine the chemical composition of the sand. Results showed that the sand is mainly made of quartz in the form of rounded and subbarrondis grains and that silicon is prevalent, accounting for 98% of the composition. This study demonstrated that sand from the Western Erg of Algeria is rich in silicon and could be used for silicon production.

  6. Abstracts Book of 41. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

    International Nuclear Information System (INIS)

    1998-01-01

    Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry is the most important scientific forum of Polish Chemists. The state of the art in many basic, fundamental and applied investigations has been presented and discussed. The following scientific sessions and microsymposia have been proposed: theoretical chemistry; molecular interactions; metal compounds - chemical, physical, electronic and biological aspects; catalysis and surface physico-chemistry; polymers - radiochemistry, modifications, physics and analytical methods; organic and bioorganic chemistry; physico-chemistry of condensed matter; chemical metallurgy; environmental protection; inorganic technology; chemistry and technology of coal; radiation chemistry; analytical chemistry; chemical engineering; young scientists forum; chemical didactics; petrochemistry; energetic materials; membranes and membrane processes; medical chemistry

  7. Effects of rice bran on sensory and physico-chemical properties of emulsified pork meatballs.

    Science.gov (United States)

    Huang, S C; Shiau, C Y; Liu, T E; Chu, C L; Hwang, D F

    2005-08-01

    Four kinds of bran, which are milled from important rice cultivators in Taiwan, have high contents of dietary fiber, fat and protein. The use of rice bran in Kung-wan, an emulsified pork meatball, was investigated. It was found that protein and fat contents, and white index of meatballs decreased as the amount of bran increased. A texture profile analysis (TPA) also indicated the hardness, gumminess and chewiness of the Kung-wan decreased. The sensory scores of taste, texture and overall acceptability of meatballs with less than 10% added bran showed no significant difference from those for meatballs without bran. However, the added amount of 15% enriched meatballs resulted in inferior sensory scores. The bran's particle size profoundly affected the sensory and physico-chemical properties of the meat products. Meatballs enriched with smaller bran particles possessed higher TPA indices and sensory scores than those added with larger ones. No significant differences in proximate composition, cooking yield, color and sensory quality were found among emulsified meatballs enriched with four different kinds of bran. Conclusively, the suitable amount of rice bran that should be added to emulsified pork meatballs was less than 10% and a smaller particle size would result in better quality.

  8. Effects of ultrasound treatment on physico-chemical, functional properties and antioxidant activity of whey protein isolate in the presence of calcium lactate.

    Science.gov (United States)

    Jiang, Zhanmei; Yao, Kun; Yuan, Xiangying; Mu, Zhishen; Gao, Zengli; Hou, Juncai; Jiang, Lianzhou

    2018-03-01

    The aim of this study was to investigate the effects of ultrasound applied at various powers (0, 200, 400, 600 or 800 W) and for different times (20 or 40 min) on the physico-chemical, functional properties and antioxidant activities of whey protein isolate (WPI) dispersions in the presence of 1.20 mmol L -1 calcium lactate. Surface hydrophobicity and free sulfhydryl group of the WPI dispersions containing 1.2 mmol L -1 calcium lactate were significantly enhanced after sonication. Furthermore, particle size of WPI dispersions containing 1.20 mmol L -1 calcium lactate was minimised after sonication. Scanning electron microscopy of sonicated WPI suspensions containing 1.20 mmol L -1 calcium lactate showed that WPI microstructure had significantly changed. After WPI dispersions were treated by sonication assisted with calcium lactate, its gel strength enhanced and solubility decreased. Gel strength of sonicated WPI dispersions (600 W, 40 min) was the maximum among all the WPI treatments. Emulsification activity of sonicated WPI dispersions reduced while its emulsion stability increased. The DPPH radical scavenging activity and ferrous reducing power of sonicated WPI dispersions mostly increased. Ultrasound treatments induced structural changes in WPI molecules, leading to different microstructure and improved gel strength of WPI in the presence of calcium lactate. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  9. “Miswak” Based Green Synthesis of Silver Nanoparticles: Evaluation and Comparison of Their Microbicidal Activities with the Chemical Synthesis

    Directory of Open Access Journals (Sweden)

    Mohammed Rafi Shaik

    2016-11-01

    Full Text Available Microbicidal potential of silver nanoparticles (Ag-NPs can be drastically improved by improving their solubility or wettability in the aqueous medium. In the present study, we report the synthesis of both green and chemical synthesis of Ag-NPs, and evaluate the effect of the dispersion qualities of as-prepared Ag-NPs from both methods on their antimicrobial activities. The green synthesis of Ag-NPs is carried out by using an aqueous solution of readily available Salvadora persica L. root extract (RE as a bioreductant. The formation of highly crystalline Ag-NPs was established by various analytical and microscopic techniques. The rich phenolic contents of S. persica L. RE (Miswak not only promoted the reduction and formation of NPs but they also facilitated the stabilization of the Ag-NPs, which was established by Fourier transform infrared spectroscopy (FT-IR analysis. Furthermore, the influence of the volume of the RE on the size and the dispersion qualities of the NPs was also evaluated. It was revealed that with increasing the volume of RE the size of the NPs was deteriorated, whereas at lower concentrations of RE smaller size and less aggregated NPs were obtained. During this study, the antimicrobial activities of both chemically and green synthesized Ag-NPs, along with the aqueous RE of S. persica L., were evaluated against various microorganisms. It was observed that the green synthesized Ag-NPs exhibit comparable or slightly higher antibacterial activities than the chemically obtained Ag-NPs.

  10. Chronic exposure to uranium compounds: medical surveillance problems related to their physico-chemical properties and their solubility: actual data and future prospects

    International Nuclear Information System (INIS)

    Ansoborlo, E.; Chalabreysse, J.C.

    1988-01-01

    A method was developped to assess uranium exposure hazards at work stations based on industrial experience acquired in Comurhex Malvesi at Narbonne. Applied to uranium tetrafluoride (UF4), the method involves five steps: 1/ Characterization of the industrial compound, including physico-chemical properties (density, surface area, X-ray spectrum and uranium enrichment). 2/ In vitro biological solubility with different synthetic fluids like Gamble solution added with differents gaz or compounds (Oxygen or hydrogen peroxyde), in order to determine the solubility class D, W or Y. 3/ Assessment of work station concentration in Bq m -3 and particle size distribution (AMAD). 4/ Monitoring workers by routine urinary excretion completed, if necessary, by fecal excretion and γ spectrometry. 5/ Use of individual protection filters or masks. Results and actual data on UF4 are presented and future prospects of studies on calcinated uranates are dealed with [fr

  11. Direct synthesis of nanocrystalline oxide powders by wet-chemical techniques

    Directory of Open Access Journals (Sweden)

    Vladimir V. Srdić

    2010-09-01

    Full Text Available In a recent period there is a great need for increasing the knowledge of tailoring the innovative procedures for the synthesis of electroceramic nanopowders and materials with improved quality for specific application. In order to produce electroceramics with desirable microstructure and properties, synthesis of stoichiometric, ultra-fine and agglomerate free powders with narrow size distributions is one of the most important steps. Within this scope, in the present paper we summarize our recent results on direct synthesis of some important perovskites and ferrites nanopowders by wet-chemical techniques.

  12. Effects of organic solvents on hyaluronic acid nanoparticles obtained by precipitation and chemical crosslinking.

    Science.gov (United States)

    Bicudo, Rafaela Costa Souza; Santana, Maria Helena Andrade

    2012-03-01

    Hyaluronic acid is a hydrophilic mucopolysaccharide composed of alternating units of D-glucuronic acid and N-acetylglucosamine. It is used in many medical, pharmaceutical, and cosmetic applications, as sponges, films, or particle formulations. Hyaluronic acid nanoparticles can be synthesized free of oil and surfactants by nanoprecipitation in organic solvents, followed by chemical crosslinking. The organic solvent plays an important role in particles size and structure. Therefore, this study aimed to investigate the influence of acetone, ethanol, and isopropyl alcohol on the synthesis and physico-chemical properties of hyaluronic acid nanoparticles. Particles were crosslinked with adipic hydrazide and chloride carbodiimide under controlled conditions. The nanoparticles obtained with all three studied solvents were moderately electrostatically stable. Experiments with acetone produced the smallest particle size (120.44 nm) and polydispersity (0.27). The size and polydispersity of hyaluronic acid nanoparticles correlated with the surface tension between water and the organic solvents, not with the thermodynamic affinity of water for the organic solvents.

  13. Investigation of physico-chemical processes in lithium-ion batteries by deconvolution of electrochemical impedance spectra

    Science.gov (United States)

    Manikandan, Balasundaram; Ramar, Vishwanathan; Yap, Christopher; Balaya, Palani

    2017-09-01

    The individual physico-chemical processes in lithium-ion batteries namely solid-state diffusion and charge transfer polarization are difficult to be tracked by impedance spectroscopy due to simultaneous contributions from cathode and anode. A deeper understanding of various polarization processes in lithium-ion batteries is important to enhance storage performance and cycle life. In this context, the polarization processes occurring in cylindrical 18650 cells comprising different cathodes against graphite anode (LiNi0.2Mn0.2Co0.6O2vs. graphite; LiNi0.6Mn0.2Co0.2O2vs. graphite; LiNi0.8Co0.15Al0.05O2vs. graphite and LiFePO4vs. graphite) are investigated by deconvolution of impedance spectra across various states of charge. Further, cathodes and anodes are extracted from the investigated 18650-type cells and tested in half-cells against Li-metal as well as in symmetric cell configurations to understand the contribution of cathode and anode to the full cells of various battery chemistries studied. Except for the LiFePO4vs. graphite cell, the polarization resistance in graphite of other cells are found to be higher than those of the investigated cathodes, proving that the polarization in lithium-ion battery is largely influenced by the graphitic anode. Furthermore, the charge transfer polarization resistance encountered by the cathodes investigated in this work is found to be a strong function of the states of charge.

  14. Evaluation of various physico-chemical properties of Hibiscus sabdariffa and L. casei incorporated probiotic yoghurt.

    Science.gov (United States)

    Rasdhari, M; Parekh, T; Dave, N; Patel, V; Subhash, R

    2008-09-01

    The present investigation was carried out to examine the effect of Hibiscus sabdariffa Calyx extract on the physico-chemical properties, sensory attributes, texture and microbial analysis of L. casei incorporated in probiotic yoghurt after manufacture and during storage. Incorporation of Hibiscus sabdariffa Calyx extract into the probiotic yoghurt resulted into decrease in coagulation time by 25 min. The pH ranged from 4.39 to 4.59, TA 0.81 to 1.14%, moisture 3.05 to 3.37 g%, syneresis 18.85 to 24.90 mL/50 g of sample, % inhibition 12.32 to 59.43, TS 21.27 to 24.90 g% and beta-galactosidase activity 1.041 to 3.277. The protein content ranged between 4.11 and 4.14 g% while the fat content ranged between 3.43 and 3.49 g%. No major changes in sensory evaluation were observed on the day of manufacture and during storage for 7 days. Sabdariffa added yoghurt showed a higher score in almost all sensory attributes. Microbial analysis showed a total plate count ranging from 1.8 x 10(4) to 1.85 x 10(7) cfu mL(-1). Yeast and mold counts were negligible in the Sabdariffa yoghurts. Thus the study concludes that incorporation of Hibiscus sabdariffa extract in yoghurt improved the total antioxidant property, organoleptic qualities and decreased the exudation of whey proteins (Syneresis). Thus, Hibiscus sabdariffa Calyces has beneficial influence on the quality of L. casei incorporated probiotic yoghurt.

  15. Effect of extrusion conditions on the physico-chemical properties and in vitro protein digestibility of canola meal.

    Science.gov (United States)

    Zhang, Bo; Liu, Guo; Ying, Danyang; Sanguansri, Luz; Augustin, Mary Ann

    2017-10-01

    Canola meal has potential as a high protein food ingredient. The extrusion-induced changes in color, pH, extractable protein and in vitro protein digestibility of canola meal under different extrusion conditions was assessed. The extrusion barrel moisture (24%, 30% or 36%) and screw kneading block length (0, 30 or 60mm) were used as independent process parameters. Extrusion at high barrel moisture (36%) favored protein aggregation resulting in lower extractable protein compared to extrusion at the lowest barrel moisture (24%). At lower barrel moisture contents (24% and 30%), a longer kneading block length increased extractable protein but this was not the case at 36% barrel moisture. Canola protein digestibility was improved upon extrusion at 30% barrel moisture but there was no significant change at lower (24%) or higher (36%) barrel moisture. The kneading block length of the screw had no significant effect on the canola protein digestibility within the same barrel moisture level. The relationship between the physico-chemical parameters and in vitro digestibility was examined. This study highlighted the complex interplay of extrusion processing variables that affect protein degradation and the interaction of components, with consequent effects on protein digestibility. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Physico-chemical state of mercury, cadmium, and zinc in surface waters of arid zone of the USSR

    International Nuclear Information System (INIS)

    Kulmatov, R.A.; Rakhmatov, U.; Kist, A.A.; Savenko, V.S.

    1983-01-01

    Experimental study was made on physico-chemical state of high-toxic heavy metals (Zn, Cd, and Hg) in waters of the Aral Sea and the Syr Darya and the Amu Darya rivers, representing the basic resrevoirs of surface waters of the Middle Asia. The complex of high-sensitive and selective radioanalytical techniques was developed for solution of the problem. The complex uncludes ultrafiltration, centrifugation, electrodialysis, sorption on sorbents of different nature, as well as neutron activation analysis. It was established that the major part of Hg, Cd and Zn can migrate in surface waters of the Middle Asia in the form of real and colloidal solutions. Zn and Cd are characterized by the prevalence of cationic really dissolved forms and Hg-anionic neutral and colloidal forms. The presence of the major mass of the given elements in the form of real and the finest colloids which are rather stable forms and can be transfered to long distances points to the promising character of applying hydrochemical methods of prospecting in arid zone of the USSR, because dispersion aureoles must be sufficiently wide. Possibility of formation of large aureoles of natural water contamination in the regions of mining and metallurgical enterprises must be considered as well

  17. Insight into the effect of inhibitor resistant S130G mutant on physico-chemical properties of SHV type beta-lactamase: a molecular dynamics study.

    Directory of Open Access Journals (Sweden)

    Mohd Hassan Baig

    Full Text Available Bacterial resistance is a serious threat to human health. The production of β-lactamase, which inactivates β-lactams is most common cause of resistance to the β-lactam antibiotics. The Class A enzymes are most frequently encountered among the four β-lactamases in the clinic isolates. Mutations in class A β-lactamases play a crucial role in substrate and inhibitor specificity. SHV and TEM type are known to be most common class A β-lactamases. In the present study, we have analyzed the effect of inhibitor resistant S130G point mutation of SHV type Class-A β-lactamase using molecular dynamics and other in silico approaches. Our study involved the use of different in silico methods to investigate the affect of S130G point mutation on the major physico-chemical properties of SHV type class A β-lactamase. We have used molecular dynamics approach to compare the dynamic behaviour of native and S130G mutant form of SHV β-lactamase by analyzing different properties like root mean square deviation (RMSD, H-bond, Radius of gyration (Rg and RMS fluctuation of mutation. The results clearly suggest notable loss in the stability of S130G mutant that may further lead to decrease in substrate specificity of SHV. Molecular docking further indicates that S130G mutation decreases the binding affinity of all the three inhibitors in clinical practice.

  18. Physico-chemical characteristics of oil produced from seeds of some date palm cultivars (Phoenix dactylifera L.) .

    Science.gov (United States)

    Soliman, S S; Al-Obeed, R S; Ahmed, T A

    2015-03-01

    The oil content of saturated and unsaturated fatty acids with some physico-chemical properties and nutrients were investigated in oil produced from seeds of six important date palm cultivars and one seed strain present in Saudi Arabia. The results indicated that the oil extracted from six seed cultivars of date palm ranged from 6.73-10.89% w/w oil. The refractive index of date seeds oil was found to be between 1.4574 to 1.4615. The iodine values, acid values and saponification values were in the range of 74.2-86.6 g iodine 100 g(-1); 2.50-2.58 mg KOH g(-1) and 0.206-0.217 mg KOH g(-1), respectively. Lauric acid, Myristic acid, Palmitic acid C15, Palmitic acid C16 Stearic acid, Arachidic acid and Behenic acid of date seeds oil contents were found between 8.67-49.27; 7.01-15.43; 0-0.57; 4.82-18.09; 1.02-7.86; 0-0.08; and 0-0.15% w/w, in that order. Omega-6 and Omega-9 of date seeds oil were found between 7.31-17.87 and 52.12-58.78%, respectively. Khalas, Barhy cvs. and seed strain gave highest K and Ca, Na and Fe, Mg as compared with other studied cultivars.

  19. Total chemical synthesis of histones and their analogs, assisted by native chemical ligation and palladium complexes.

    Science.gov (United States)

    Maity, Suman Kumar; Jbara, Muhammad; Mann, Guy; Kamnesky, Guy; Brik, Ashraf

    2017-11-01

    Chemical synthesis of histones allows precise control of the installation of post-translational modifications via the coupling of derivatized amino acids. Shortcomings of other approaches for obtaining modified histones for epigenetic studies include heterogeneity of the obtained product and difficulties in incorporating multiple modifications on the same histone. In this protocol, unprotected peptide fragments are prepared by Fmoc solid-phase synthesis and coupled in aqueous buffers via native chemical ligation (NCL; in NCL, a peptide bond is formed between a peptide with an N-terminal Cys and another peptide having a C-terminal thioester). This task is challenging, with obstacles relating to the preparation and ligation of hydrophobic peptides, as well as the requirement for multiple purification steps due to protecting-group manipulations during the polypeptide assembly process. To address this, our approach uses an easily removable solubilizing tag for the synthesis and ligation of hydrophobic peptides, as well as a more efficient and better-yielding method to remove Cys-protecting groups that uses palladium chemistry (specifically [Pd(allyl)Cl] 2 and PdCl 2 complexes). The utility of this approach is demonstrated in the syntheses of ubiquitinated H2B at Lys34, phosphorylated H2A at Tyr57 and unmodified H4. Each of these analogs can be prepared in milligram quantities within ∼20-30 d.

  20. Recent Progress in the Chemical Synthesis of Class II and S-Glycosylated Bacteriocins

    Directory of Open Access Journals (Sweden)

    François Bédard

    2018-05-01

    Full Text Available A wide variety of antimicrobial peptides produced by lactic acid bacteria (LAB have been identified and studied in the last decades. Known as bacteriocins, these ribosomally synthesized peptides inhibit the growth of a wide range of bacterial species through numerous mechanisms and show a great variety of spectrum of activity. With their great potential as antimicrobial additives and alternatives to traditional antibiotics in food preservation and handling, animal production and in veterinary and medical medicine, the demand for bacteriocins is rapidly increasing. Bacteriocins are most often produced by fermentation but, in several cases, the low isolated yields and difficulties associated with their purification seriously limit their use on a large scale. Chemical synthesis has been proposed for their production and recent advances in peptide synthesis methodologies have allowed the preparation of several bacteriocins. Moreover, the significant cost reduction for peptide synthesis reagents and building blocks has made chemical synthesis of bacteriocins more attractive and competitive. From a protein engineering point of view, the chemical approach offers many advantages such as the possibility to rapidly perform amino acid substitution, use unnatural or modified residues, and make backbone and side chain modifications to improve potency, modify the activity spectrum or increase the stability of the targeted bacteriocin. This review summarized synthetic approaches that have been developed and used in recent years to allow the preparation of class IIa bacteriocins and S-linked glycopeptides from LAB. Synthetic strategies such as the use of pseudoprolines, backbone protecting groups, microwave irradiations, selective disulfide bridge formation and chemical ligations to prepare class II and S-glycosylsated bacteriocins are discussed.

  1. Caracterização do mel produzido por espécies de Melipona Illiger, 1806 (apidae: meliponini) da região nordeste do Brasil: 1. Características físico-químicas Characterization of honey produced by species of Melipona Illiger, 1806 (apidae: meliponini) from the northeast area of Brazil: 1. Physico-chemical characteristics

    OpenAIRE

    Bruno de Almeida Souza; Luís Carlos Marchini; Melissa Oda-Souza; Carlos Alfredo Lopes de Carvalho; Rogério Marcos de Oliveira Alves

    2009-01-01

    Thirty three honey samples produced by four Melipona species from different areas of the State of Bahia, were analyzed with the aim to determine their physico-chemical characteristics, contributing to the establishment of standards for quality control. The majority of the average values for physico-chemical parameters fulfilled the quality criteria established by the Brazilian and international Legislations for Apis honey, except for moisture content, which afforded higher values. Concerning ...

  2. Synthesis and characterization of Cu-MFI catalyst for the direct medium temperature range NO decomposition

    Directory of Open Access Journals (Sweden)

    Valkaj Karolina Maduna

    2016-03-01

    Full Text Available In this study the physico-chemical and catalytic properties of copper bearing MFI zeolites (Cu-MFI with different Si/Al and Si/Cu ratios were investigated. Two different methods for incorporation of metal ions into the zeolite framework were used: the ion exchange from the solution of copper acetate and the direct hydrothermal synthesis. Direct synthesis of a zeolite in the presence of copper-phosphate complexes was expected to generate more active copper species necessary for the desired reaction than the conventional ion exchange method. Direct decomposition of NO was used as a model reaction, because this reaction still offers a very attractive approach to NOX removal. The catalytic properties of zeolite samples were studied using techniques, such as XRD, SEM, EPR and nitrogen adsorption/desorption measurements at 77 K. Results of the kinetic investigation revealed that both methods are applicable for the preparation of the catalysts with active sites capable of catalyzing the NO decomposition. It was found out that Cu-MFI zeolites obtained through direct synthesis are promising catalysts for NO decomposition, especially at lower reaction temperatures. The efficiency of the catalysts prepared by both methods is compared and discussed.

  3. Physico-chemical characteristics of shallot New-Superior Varieties (NSV) from Indonesia

    Science.gov (United States)

    Sukasih, E.; Setyadjit; Musadad, D.

    2018-01-01

    Shallot is one of the priority agricultural commodities to be developed in Indonesia to reduce import and to stabilize domestic supply. The efforts include the selection of varieties, seed technology, agronomy, handling and processing to extend the supply and added value. Indonesian Agency for Agricultural Research and Development (IAARD) has purified, cross-pollinated, selected and released new varieties called New Superior Varieties (NSV) to farmers. The purpose of this research was to investigate the characteristic of fresh shallot NSV by understanding its potential for raw material of processed product. A completely randomized design (CRD) of single factor of ten local varieties of shallot such as Cv. Sembrani, Cv. Kuning, Cv. Pancasona, Cv. Bima, Cv. Trisula, Cv. Pikatan, Cv. Katumi, Cv. Kramat-2, Cv. Mentes and Cv. Majalok of three replication was used to arrange the experiment. The results showed that shallot New Superior Varieties (NSV) were significant by effect the physico-chemical parameters, such as diameter, length, weight of both in main bulb and tiller bulb, fat total, carbohydrate, crude fiber, starch content, antioxidant capacity and quercetin. Of the ten varieties of shallot characterized, the largest bulbs are Cv. Sembrani i.e 5.30 ± 0.3g per bulb, the best red color for shallot peeled was Cv. Kuning. Furthermore Cv. Pancasona have the highest protein content of 4.23 ± 0.2%, Cv. Mentes have the highest functional properties of quercetin 1766.4 ± 134 ppm. Shallot varieties such as Cv. Sembrani, Cv. Bima, Cv. Kuning and Cv. Trisula suitable for use as fresh product. Shallot varieties such as Cv. Pikatan, Cv. Pancasona, Cv. Katumi and Cv. Kramat-2 are suitable as raw materials for processed products. Cv. Mentes and Cv. Majalok were potential for raw materials of functional food and pharmaceutical industries.

  4. Evaluation of arsenic and other physico-chemical parameters of surface and ground water of Jamshoro, Pakistan

    International Nuclear Information System (INIS)

    Baig, Jameel Ahmed; Kazi, Tasneem Gul; Arain, Muhammad Balal; Afridi, Hassan Imran; Kandhro, Ghulam Abbas; Sarfraz, Raja Adil; Jamal, Muhammad Khan; Shah, Abdul Qadir

    2009-01-01

    Arsenic contamination in water has caused severe health problems around the world. The purpose of this study was to evaluate the geological and anthropogenic aspects of As pollution in surface and groundwater resources of Jamshoro Sindh, Pakistan. Hydride generator atomic absorption spectrophotometry (HG-AAS) is employed for the determination of arsenic in water samples, with detection limit of 0.02 μg l -1 . Arsenic concentrations in surface and underground water range from 3.0 to 50.0, and 13 to 106 μg l -1 , respectively. In most of the water samples As levels exceeded the WHO provisional guideline values 10 μg l -1 . The high level of As in under study area may be due to widespread water logging from Indus river irrigation system which causes high saturation of salts in this semi-arid region and lead to enrichment of As in shallow groundwater. Among the physico-chemical parameters, electrical conductivity, Na + , K + , and SO 4 2- were found to be higher in surface and ground water, while elevated levels of Ca 2+ and Cl - were detected only in ground water than WHO permissible limit. The high level of iron was observed in ground water, which is a possible source of As enrichment in the study area. The multivariate technique (cluster analysis) was used for the elucidation of high, medium and low As contaminated areas. It may be concluded that As originate from coal combustion at brick factories and power generation plants, and it was mobilized promotionally by the alkaline nature of the understudy groundwater samples.

  5. Physico-chemical characteristics and free fatty acid composition of dry fermented mutton sausages as affected by the use of various combinations of starter cultures and spices.

    Science.gov (United States)

    Zhao, Lihua; Jin, Ye; Ma, Changwei; Song, Huanlu; Li, Hui; Wang, Zhenyu; Xiao, Shan

    2011-08-01

    The microbiological, physico-chemical and free fatty acid composition of dry fermented mutton sausages were determined during ripening and storage. Three sausage mixtures (starter culture [SC], SC and black pepper [SC+BP] and SC, BP and cumin [SC+BP+C]) were compared with a control (CO). In general, the lactic acid bacteria populations in the SC+BP increased significantly to 9 log CFU/g and were higher than the CO (8 log CFU/g) (P0.05). Copyright © 2011 Elsevier Ltd. All rights reserved.

  6. Chemical Synthesis of Circular Proteins*

    Science.gov (United States)

    Tam, James P.; Wong, Clarence T. T.

    2012-01-01

    Circular proteins, once thought to be rare, are now commonly found in plants. Their chemical synthesis, once thought to be difficult, is now readily achievable. The enabling methodology is largely due to the advances in entropic chemical ligation to overcome the entropy barrier in coupling the N- and C-terminal ends of large peptide segments for either intermolecular ligation or intramolecular ligation in end-to-end cyclization. Key elements of an entropic chemical ligation consist of a chemoselective capture step merging the N and C termini as a covalently linked O/S-ester intermediate to permit the subsequent step of an intramolecular O/S-N acyl shift to form an amide. Many ligation methods exploit the supernucleophilicity of a thiol side chain at the N terminus for the capture reaction, which makes cysteine-rich peptides ideal candidates for the entropy-driven macrocyclization. Advances in desulfurization and modification of the thiol-containing amino acids at the ligation sites to other amino acids add extra dimensions to the entropy-driven ligation methods. This minireview describes recent advances of entropy-driven ligation to prepare circular proteins with or without a cysteinyl side chain. PMID:22700959

  7. Assessment of Chemical and Physico-Chemical Properties of Cyanobacterial Lipids for Biodiesel Production

    Directory of Open Access Journals (Sweden)

    Heizir F. De Castro

    2013-07-01

    Full Text Available Five non-toxin producing cyanobacterial isolates from the genera Synechococcus, Trichormus, Microcystis, Leptolyngbya and Chlorogloea were examined in terms of quantity and quality as lipid feedstock for biofuel production. Under the conditions used in this study, the biomass productivity ranged from 3.7 to 52.7 mg·L−1·day−1 in relation to dry biomass, while the lipid productivity varied between 0.8 and 14.2 mg·L−1·day−1. All cyanobacterial strains evaluated yielded lipids with similar fatty acid composition to those present in the seed oils successfully used for biodiesel synthesis. However, by combining biomass and lipid productivity parameters, the greatest potential was found for Synechococcus sp. PCC7942, M. aeruginosa NPCD-1 and Trichormus sp. CENA77. The chosen lipid samples were further characterized using Fourier Transform Infrared spectroscopy (FTIR, viscosity and thermogravimetry and used as lipid feedstock for biodiesel synthesis by heterogeneous catalysis.

  8. Synthesis Characterization and Decomposition Studies of tris[N-N-dibenzyidithocarbaso)Indium (III) Chemical Spray Deposition of Polycrystalline CuInS2 on Copper Films

    Science.gov (United States)

    Hehemann, David G.; Lau, J. Eva; Harris, Jerry D.; Hoops, Michael D.; Duffy, Norman V.

    2005-01-01

    This paper presents the results of the synthesis characterization and decomposition studies of tris[N-N-dibenzyidithocarbaso)Indium (III) with chemical spray deposition of polycrystalline CuInS2 on Copper Films.

  9. Temporal Variations in Physico-Chemical and Microbiological Characteristics of Mvudi River, South Africa

    Directory of Open Access Journals (Sweden)

    Joshua N. Edokpayi

    2015-04-01

    Full Text Available Surface water has been a source of domestic water due to shortage of potable water in most rural areas. This study was carried out to evaluate the level of contamination of Mvudi River in South Africa by measuring turbidity, electrical conductivity (EC, pH, concentrations of nitrate, fluoride, chloride, and sulphate. E. coli and Enterococci were analysed using membrane filtration technique. Average pH, EC and Turbidity values were in the range of 7.2–7.7, 10.5–16.1 mS/m and 1.3–437.5 NTU, respectively. The mean concentrations of fluoride, chloride, nitrate and sulphate for both the wet and the dry seasons were 0.11 mg/L and 0.27 mg/L, 9.35 mg/L and 14.82 mg/L, 3.25 mg/L and 6.87 mg/L, 3.24 mg/L and 0.70 mg/L, respectively. E. coli and Enterococci counts for both the wet and the dry seasons were 4.81 × 103 (log = 3.68 and 5.22 × 103 (log = 3.72, 3.4 × 103 (log = 3.53 and 1.22 × 103 (log = 3.09, per 100 mL of water, respectively. The count of E. coli for both seasons did not vary significantly (p > 0.05 but Enterococci count varied significantly (p < 0.001. All the physico-chemical parameters obtained were within the recommended guidelines of the Department of Water Affairs and Forestry of South Africa and the World Health Organization for domestic and recreational water use for both seasons except turbidity and nitrates. The microbiological parameters exceeded the established guidelines. Mvudi River is contaminated with faecal organisms and should not be used for domestic purposes without proper treatment so as to mitigate the threat it poses to public health.

  10. The influence of physico-chemical properties of soils on the bioavailability of 65Zn

    Science.gov (United States)

    Kochetkov, Ilia; Anisimov, Vyacheslav

    2014-05-01

    Stability of soils to the effects of man-made origin pollutants is determined by their buffer capaci-ty (the ability to inactivate pollutants in a soil - soil solution - plant system). Soils are character-ized by the same types of stability as the ecosystem as a whole. Increased migration activity of pollutants is a symptom of ecological trouble, due to the soil transformation in an unstable state. Thus, the problem of the stability of soil is one of the fundamental problems of modern science. The aim of the study was to estimate the buffering capacity of soil as a key factor of their ecological and geochemical stability with respect to a relatively long-lived radionuclides 65Zn (T1/2 = 224 days), representing the radiological hazard in the location of nuclear facilities. There was proposed a method for scoring the buffering capacity of soils as for 65Zn contamination. It's based on dependence between the main physico-chemical soil properties and accumulation of the radionuclide in the aboveground plant parts (barley kind of "Zazersky-85"). The role of the considered indicators of soil health in the accumulation of radiozinc by plants was defined. The essence of this technique was to assess the contribution of individual characteristics of the soil condition, which play the most important role in the regulation of mobility (and bioavailability) of radionuclides, using the method of stepwise multiple regression analysis. For this aim representative sampling was compiled (from 20 soil types and varieties belonging to different climatic zones of the European part of the Russian Federation), thus providing a wide range of variation of the studied physical and chemical parameters, and also vegetation model experiments using 65Zn were held. On the basis of the conducted statistical analysis was revealed that the dominant contribution to the variation of the effective trait (accumulation coefficient of 65Zn) make: CaCO3 content, mobile iron (Tamm extract) and pH. As a

  11. Immobilization methods for the rapid total chemical synthesis of proteins on microtiter plates.

    Science.gov (United States)

    Zitterbart, Robert; Krumrey, Michael; Seitz, Oliver

    2017-07-01

    The chemical synthesis of proteins typically involves the solid-phase peptide synthesis of unprotected peptide fragments that are stitched together in solution by native chemical ligation (NCL). The process is slow, and throughput is limited because of the need for repeated high performance liquid chromatography purification steps after both solid-phase peptide synthesis and NCL. With an aim to provide faster access to functional proteins and to accelerate the functional analysis of synthetic proteins by parallelization, we developed a method for the high performance liquid chromatography-free synthesis of proteins on the surface of microtiter plates. The method relies on solid-phase synthesis of unprotected peptide fragments, immobilization of the C-terminal fragment and on-surface NCL with an unprotected peptide thioester in crude form. Herein, we describe the development of a suitable immobilization chemistry. We compared (i) formation of nickel(II)-oligohistidine complexes, (ii) Cu-based [2 + 3] alkine-azide cycloaddition and (iii) hydrazone ligation. The comparative study identified the hydrazone ligation as most suitable. The sequence of immobilization via hydrazone ligation, on-surface NCL and radical desulfurization furnished the targeted SH3 domains in near quantitative yield. The synthetic proteins were functional as demonstrated by an on-surface fluorescence-based saturation binding analysis. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.

  12. PHYSICO-CHEMICAL ASSESSMENT OF POMACE EXHAUSTED AND APPRECIATION OF THEIR COMPOSTABILITY IN THE DELEGATION OF KALAA KEBIRA (TUNISIA

    Directory of Open Access Journals (Sweden)

    Y. M'Sadak

    2016-05-01

    Full Text Available Olive pomace is the solid by-product obtained from the extraction of olive oil revealing serious environmental problems in all Mediterranean countries olive growing. Generally, that pomace can be valued, among others, as a source of organic matter (composting. In this perspective, we have addressed in this work to the quantitive and qualitative characterization (limited to certain physico-chemical parameters of the solid by-product of olive oil extraction in the delegation of Kalaa Kebira (Sousse, Tunisia while appreciating their compostability. The results showed that those olive residues are essentially dry, carbon-rich and CF, low in nitrogen. They can be used as compost by combining them with other available sources of plant originand/or animal such as manure of cattle, sheep or poultry (in varying proportions and responsible of the nature very heterogeneous and the variable quality that can be applied to improve soil fertility and crop productivity.

  13. Physico-chemical and sensory characteristics of steviolbioside synthesized from stevioside and its application in fruit drinks and food.

    Science.gov (United States)

    Khattab, Sherine N; Massoud, Mona I; Abd El-Razek, Amal M; El-Faham, Ayman

    2017-01-01

    Steviolbioside (Sb) was synthesized from stevioside and characterized by infrared, nuclear magnetic resonance ( 1 H NMR and 13 C NMR) spectroscopy. The purity melting point, solubility, acute toxicity, heat stability and sensory properties of Sb were evaluated. Physico-chemical and sensory properties of low calorie fruit drinks and shortened cake prepared by replacing sugar with Sb were evaluated. Sb was stable in neutral or acidic aqueous solutions maintained at 100 °C for 2 h. The sweetness intensity rate of Sb was found to be about 44 and 18.51 times sweeter than 0.5% and 10% sucrose solution, respectively. Sb solutions had sweet taste without bitterness compared to stevioside. No significant differences between the organoleptic properties of cakes prepared using sugar and those prepared replacing sugar with 50% Sb were observed. All drinks replacing sugar with Sb at 66% level had the highest overall acceptability scores comparable to those prepared using sugar alone.

  14. Room temperature chemical synthesis of Cu(OH){sub 2} thin films for supercapacitor application

    Energy Technology Data Exchange (ETDEWEB)

    Gurav, K.V. [Thin Film Photonic and Electronics Lab, Department of Materials Science and Engineering, Chonnam National University, 300 Yongbong-dong, Puk-Gu, Gwangju 500-757 (Korea, Republic of); Patil, U.M. [Thin Film Physics Laboratory, Department of Physics, Shivaji University, Kolhapur 416 007 (M.S.) (India); Shin, S.W.; Agawane, G.L.; Suryawanshi, M.P.; Pawar, S.M.; Patil, P.S. [Thin Film Photonic and Electronics Lab, Department of Materials Science and Engineering, Chonnam National University, 300 Yongbong-dong, Puk-Gu, Gwangju 500-757 (Korea, Republic of); Lokhande, C.D. [Thin Film Physics Laboratory, Department of Physics, Shivaji University, Kolhapur 416 007 (M.S.) (India); Kim, J.H., E-mail: jinhyeok@chonnam.ac.kr [Thin Film Photonic and Electronics Lab, Department of Materials Science and Engineering, Chonnam National University, 300 Yongbong-dong, Puk-Gu, Gwangju 500-757 (Korea, Republic of)

    2013-10-05

    Highlights: •Cu(OH){sub 2} is presented as the new supercapacitive material. •The novel room temperature method used for the synthesis of Cu(OH){sub 2}. •The hydrous, nanograined Cu(OH){sub 2} shows higher specific capacitance of 120 F/g. -- Abstract: Room temperature soft chemical synthesis route is used to grow nanograined copper hydroxide [Cu(OH){sub 2}] thin films on glass and stainless steel substrates. The structural, morphological, optical and wettability properties of Cu(OH){sub 2} thin films are studied by means of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), UV–vis spectrophotometer and water contact angle measurement techniques. The results showed that, room temperature chemical synthesis route allows to form the nanograined and hydrophilic Cu(OH){sub 2} thin films with optical band gap energy of 3.0 eV. The electrochemical properties of Cu(OH){sub 2} thin films are studied in an aqueous 1 M NaOH electrolyte using cyclic voltammetry. The sample exhibited supercapacitive behavior with 120 F/g specific capacitance.

  15. Physico-chemical characteristics and antimicrobial studies of silver doped hydroxyapatite

    Science.gov (United States)

    Predoi, D.; Predoi, M. V.; Kettani, Moncef Ech Cherif El; Leduc, Damien; Iconaru, S. L.; Ciobanu, C. S.; Buton, N.; Petre, C. C.; Prodan, A. M.

    2018-02-01

    The present research is focused on the synthesis, structural and morphological characterization and antimicrobial evaluation of silver doped hydroxyapatite (AgHAp) in water. The preliminary ultrasonic characterizations of the AgHAp in water synthesized by an adapted co-precipitation method are also presented. X-ray diffraction result showed that silver ions were substituted in the hydroxyapatite structure. The lattice parameters increased when the silver substitution increased. The morphology of AgHAp were evaluated by Scanning Electron Microscopy (SEM). By EDX analysis the constituents elements of hydroxyapatite were detected in all analyzed samples. The silver was also found in the samples with xAg = 0.5 and 0.2. The colloidal properties of the resulted AgHAp (xAg = 0.0, 0.05 and 0.2) in water were analyzed by Dynamic Light Scattering (DLS) and zeta potential. On the other hand, the novelty of our research consists of preliminary ultrasonic measurements (US) conducted on AgHAp in water. Furthermore, the antimicrobial activity of AgHAp was evaluated and a decrease in the number of surviving cells was established.

  16. Poly(lactide-co-glycolide) nanocapsules containing benzocaine: influence of the composition of the oily nucleus on physico-chemical properties and anesthetic activity.

    Science.gov (United States)

    de Melo, Nathalie Ferreira Silva; Grillo, Renato; Guilherme, Viviane Aparecida; de Araujo, Daniele Ribeiro; de Paula, Eneida; Rosa, André Henrique; Fraceto, Leonardo Fernandes

    2011-08-01

    The aim of this work was to investigate the influence of the oily nucleus composition on physico-chemical properties and anesthetic activity of poly (lactide-co-glycolide) nanocapsules with benzocaine. Nanocapsules containing benzocaine were prepared with three different oily nucleus composition and characterized by mean diameter, polydispersivity, zeta potential, pH and stability were investigated as a function of time. In vitro release kinetics were performed in a system with two compartments separated by a cellulose membrane. Intensity and duration of analgesia were evaluated in rats by sciatic nerve blockade. The greatest stability, slower release profile and improvement in the local anesthetic activity of BZC were obtained with the formulation using USP mineral oil as component. Results from our study provide useful perspectives on selection of the primary materials needed to produce suspensions of polymeric nanocapsules able to act as carriers of BZC, with potential future application in the treatment of pain.

  17. Isolation and physico-chemical characterization of Butea parviflora seed oil; Aislamiento y caracterización físico-química de aceites de semillas de Butea parviflora

    Energy Technology Data Exchange (ETDEWEB)

    Kaki, S.S.; Jabeen, T.; Reddy, J.R.C.; Ram Mohan, M.; Anjaneyulu, E.; Prasad, R.B.N.; Rao, B.V.S.K

    2016-07-01

    The seeds of Butea parviflora were investigated for oil extraction and the oil was studied for complete physico-chemical properties. The fatty acid profile of the seed oil showed oleic acid (18:1) at 27.5%, linoleic acid (18:2) at 26.4%, palmitic acid (16:0) at 16.1% and behenic acid (22:0) at 14.1% as the major fatty acids. The physico-chemical characteristics of the seed oil were studied for parameters such as free fatty acids (0.71%), iodine value (76.2 g/100g), peroxide value (5.95 ppm), saponification value (177.32 mg KOH/g), unsaponifiable matter (0.82%), phosphorous content (197 ppm), triglyceride analysis, tocols, specific gravity and refractive index following standard procedures. [Spanish] Se ha estudiado la extracción de aceite de semillas de Butea parviflora así como las características físico-químicas completas del aceite. El perfil de ácidos grasos está compuesto de un 27,5% de ácido oleico (18:1), 26,4% de ácido linoleico (18:2), 16,1% de ácido palmítico (16:0) y 14.1% de behénico (22:0) como principales ácidos grasos. Se han estudiado las características físico-químicas del aceite de las semilla tales como los ácidos grasos libres (0,71%), índice de yodo (76,2 g/100 g), índice de peróxido (5,95 ppm), índice de saponificación (177,32 mg KOH/g), materia insaponificable (0,82%), contenido en fósforo (197 ppm), análisis de triglicéridos, gravedad específica e índice de refracción, siguiendo los protocolos recogidos en procedimientos estandarizados.

  18. An Efficient, Green Chemical Synthesis of the Malaria Drug ...

    African Journals Online (AJOL)

    Results : A green-chemical synthesis of piperaquine is described that proceeds in 92 – 93 % overall yield. ... Keywords: ACTs, Dihydroartemisinin Piperaquine, Dihydroartemisinin, Green Chemistry, Malaria, ..... Mathers CD, Ezzati M, Lopez AD. ... Medicines Programme [Homepage on the Internet]. Geneva ... An Alternative.

  19. Physico-chemical characterisation of the fat from red-skin rambutan (Nephellium lappaceum L.) seed.

    Science.gov (United States)

    Manaf, Yanty Noorziana Abdul; Marikkar, Jalaldeen Mohammed Nazrim; Long, Kamariah; Ghazali, Hasanah Mohd

    2013-01-01

    The seeds (6.9±0.2% by weight of fruit) of the red-skin rambutan (Nephelium lappaceum L.) contain a considerable amount of crude fat (38.0±4.36%) and thus, the aim of the study was to determine the physico-chemical properties of this fat for potential applications. The iodine and saponification values, and unsaponifiable matter and free fatty acid contents of the seed fat were 50.27 g I2/100g fat, 182.1 mg KOH/g fat, 0.8% and 2.1%, respectively. The fat is pale yellow with a Lovibond color index of 3.1Y+1.1R. The fatty acid profile indicates an almost equal proportion of saturated (49.1%) and unsaturated (50.9%) fatty acids, where oleic (42.0%) and arachidic (34.3%) acids were the most dominant fatty acids. It also contained small amounts of stearic (8.0%), palmitic (4.6%), gadoleic (5.9%), linoleic (2.2%), behenic (2.1%) palmitoleic (0.7%) myristic (0.1%) and erucic (0.1%) acids. HPLC analysis showed that the fat comprised mainly unknown triacylglycerols (TAG) with high retention times indicating they have higher carbon numbers compared with many vegetable oils. The fat has melting and cooling points of 44.2°C and -42.5°C, respectively, making it a semi-solid at room temperature. The solid content at 0°C was 53.5% and the fat melted completely at 40°C. z-Nose analysis showed that the presence of high levels of volatile compounds in red-skin rambutan seed and seed fat.

  20. Effect of added phosphate and type of cooking method on physico-chemical and sensory features of cooked lamb loins.

    Science.gov (United States)

    Roldán, Mar; Antequera, Teresa; Pérez-Palacios, Trinidad; Ruiz, Jorge

    2014-05-01

    This study evaluated the effect of brining with phosphates on the physico-chemical and sensory features of sous-vide and roasted cooked lamb. Lamb loins (n=48) were injected with either 10% w/w of distilled water or a solution containing 0.2% or 0.4% (w/v) of a mixture of phosphate salts. After injection, samples were either sous-vide cooked (12h-60°C) or oven roasted (180°C until 73°C of core temp.). Expressible moisture, cooking loss, instrumental color, pH, water holding capacity, instrumental texture and sensory properties were evaluated. Brining with phosphates led to lower cooking loss in both sous-vide and oven roasted samples, but only the former showed significantly higher moisture content. Phosphates increased instrumental hardness and shear force values in sous-vide samples, while this effect was not as evident in roasted ones. Toughness was reduced and juiciness was improved as a consequence of phosphate addition. Overall, injection of a phosphate solution appears as a potential procedure for improving sensory textural features of cooked lamb whole cuts. Copyright © 2014 Elsevier Ltd. All rights reserved.