WorldWideScience

Sample records for surveys development application

  1. Principles of survey development for telemedicine applications.

    Science.gov (United States)

    Demiris, George

    2006-01-01

    Surveys can be used in the evaluation of telemedicine applications but they must be properly designed, consistent and accurate. The purpose of the survey and the resources available will determine the extent of testing that a survey instrument should undergo prior to its use. The validity of an instrument is the correspondence between what is being measured and what was intended to be measured. The reliability of an instrument describes the 'consistency' or 'repeatability' of the measurements made with it. Survey instruments should be designed and tested following basic principles of survey development. The actual survey administration also requires consideration, for example data collection and processing, as well as the interpretation of the findings. Surveys are of two different types. Either they are self-administered, or they are administered by interview. In the latter case, they may be administered by telephone or in a face-to-face meeting. It is important to design a survey instrument based on a detailed definition of what it intends to measure and to test it before administering it to the larger sample.

  2. Applicant Satisfaction Survey

    Data.gov (United States)

    Office of Personnel Management — The Chief Human Capital Officers developed 3 surveys that asks applicants to assess their satisfaction with the application process on a 1-10 point scale, with 10...

  3. Review of Development Survey of Phase Change Material Models in Building Applications

    Directory of Open Access Journals (Sweden)

    Hussein J. Akeiber

    2014-01-01

    Full Text Available The application of phase change materials (PCMs in green buildings has been increasing rapidly. PCM applications in green buildings include several development models. This paper briefly surveys the recent research and development activities of PCM technology in building applications. Firstly, a basic description of phase change and their principles is provided; the classification and applications of PCMs are also included. Secondly, PCM models in buildings are reviewed and discussed according to the wall, roof, floor, and cooling systems. Finally, conclusions are presented based on the collected data.

  4. Development and Evaluation the Satisfaction of Using an Oral Health Survey Mobile Application.

    Science.gov (United States)

    Detsomboonrat, Palinee; Pisarnturakit, Pagaporn Pantuwadee

    2018-06-05

    Surveying oral health at the community level should be done at regular intervals. Dental health personnel must assess the oral health status and needs of the community through the collection and interpretation of reliable health information. Thus, the aims of this study were (1) to develop a mobile application for oral health surveys, (2) to analyze the oral status of school children in Bangkok using the newly developed application, and (3) to evaluate user satisfaction with using the Oral Health Survey Mobile Application (OHSMA). The OHSMA Android app was created to facilitate the collection and transfer of oral health status data. The survey data on the oral health status of Grades 1-6 Thai schoolchildren were collected and analyzed using the OHSMA. A 5-point Likert scale questionnaire was used to evaluate the satisfaction of 125 dental students when using this new application compared with using paper forms. The prevalence of dental caries in 441 schoolchildren was 79.7%. The total mean decayed, missing, and filled for primary teeth (dmft) and decayed, missing, and filled for permanent teeth (DMFT) were 4.09 (d + D = 3.29, m + M = 0.15, and f + F = 0.65). Users indicated high satisfaction scores for three OHSMA features: font, color, and proper size. The results showed that paper forms were easier for inputting and recording the data compared with the OHSMA. However, the OHSMA was significantly easier for searching data and reporting data compared with paper forms (OHSMA 3.80, paper forms 3.35; p application has the potential to collect valuable oral health survey data.

  5. Retirement Applicant Satisfaction Survey Results

    Data.gov (United States)

    Social Security Administration — This dataset contains information about the Retirement Applicant Survey (RAS). The survey measured satisfaction results with the retirement application process. The...

  6. Development, application, and validation of a survey for infectious disease control practices at equine boarding facilities.

    Science.gov (United States)

    Kirby, Alanna T; Traub-Dargatz, Josie L; Hill, Ashley E; Kogan, Lori R; Morley, Paul S; Heird, James C

    2010-11-15

    To develop a questionnaire for self-assessment of biosecurity practices at equine boarding facilities and to evaluate infectious disease control practices in these facilities in Colorado. Cross-sectional study. 64 equine boarding facilities in Colorado. Survey questions were rated according to importance for prevention and containment of equine infectious diseases. Point values (range, 0 to 20) were assigned for possible responses, with greater values given for optimal infection control methods. Questionnaires were mailed to equine boarding facilities in Colorado advertised on the World Wide Web. Survey responses were compared with assessments made by a member of the research team during visits to 30 randomly selected facilities. Agreement among results was analyzed via a kappa test and rated as poor, fair, moderate, substantial, or nearly perfect. Survey responses were received for 64 of 163 (39%) equine boarding facilities. Scores ranged from 106 to 402 points (maximum possible score, 418). Most facilities received better scores for movement and housing of equids than for other sections of the survey. Respondents at 24 of 48 (50%) facilities that routinely received new equids reported isolation of new arrivals. Agreement between self-assessment by survey respondents and evaluation by a member of the research team was determined to be fair to substantial. Most equine boarding facilities have opportunities to improve measures for prevention or containment of contagious diseases (eg, isolation of newly arrived equids and use of written health management protocols). Most self-assessments of infection control practices were accurate.

  7. Developing the online survey.

    Science.gov (United States)

    Gordon, Jeffry S; McNew, Ryan

    2008-12-01

    Institutions of higher education are now using Internet-based technology tools to conduct surveys for data collection. Research shows that the type and quality of responses one receives with online surveys are comparable with what one receives in paper-based surveys. Data collection can take place on Web-based surveys, e-mail-based surveys, and personal digital assistants/Smartphone devices. Web surveys can be subscription templates, software packages installed on one's own server, or created from scratch using Web programming development tools. All of these approaches have their advantages and disadvantages. The survey owner must make informed decisions as to the right technology to implement. The correct choice can save hours of work in sorting, organizing, and analyzing data.

  8. The development of a clinical outcomes survey research application: Assessment Center.

    Science.gov (United States)

    Gershon, Richard; Rothrock, Nan E; Hanrahan, Rachel T; Jansky, Liz J; Harniss, Mark; Riley, William

    2010-06-01

    The National Institutes of Health sponsored Patient-Reported Outcome Measurement Information System (PROMIS) aimed to create item banks and computerized adaptive tests (CATs) across multiple domains for individuals with a range of chronic diseases. Web-based software was created to enable a researcher to create study-specific Websites that could administer PROMIS CATs and other instruments to research participants or clinical samples. This paper outlines the process used to develop a user-friendly, free, Web-based resource (Assessment Center) for storage, retrieval, organization, sharing, and administration of patient-reported outcomes (PRO) instruments. Joint Application Design (JAD) sessions were conducted with representatives from numerous institutions in order to supply a general wish list of features. Use Cases were then written to ensure that end user expectations matched programmer specifications. Program development included daily programmer "scrum" sessions, weekly Usability Acceptability Testing (UAT) and continuous Quality Assurance (QA) activities pre- and post-release. Assessment Center includes features that promote instrument development including item histories, data management, and storage of statistical analysis results. This case study of software development highlights the collection and incorporation of user input throughout the development process. Potential future applications of Assessment Center in clinical research are discussed.

  9. Development and applicability of Hospital Survey on Patient Safety Culture (HSOPS) in Japan.

    Science.gov (United States)

    Ito, Shinya; Seto, Kanako; Kigawa, Mika; Fujita, Shigeru; Hasegawa, Toshihiko; Hasegawa, Tomonori

    2011-02-07

    Patient safety culture at healthcare organizations plays an important role in guaranteeing, improving and promoting overall patient safety. Although several conceptual frameworks have been proposed in the past, no standard measurement tool has yet been developed for Japan. In order to examine possibilities to introduce the Hospital Survey on Patient Safety Culture (HSOPS) in Japan, the authors of this study translated the HSOPS into Japanese, and evaluated its factor structure, internal consistency, and construct validity. Healthcare workers (n = 6,395) from 13 acute care general hospitals in Japan participated in this survey. Confirmatory factor analysis indicated that the Japanese HSOPS' 12-factor model was selected as the most pertinent, and showed a sufficiently high standard partial regression coefficient. The internal reliability of the subscale scores was 0.46-0.88. The construct validity of each safety culture sub-dimension was confirmed by polychoric correlation, and by an ordered probit analysis. The results of the present study indicate that the factor structures of the Japanese and the American HSOPS are almost identical, and that the Japanese HSOPS has acceptable levels of internal reliability and construct validity. This shows that the HSOPS can be introduced in Japan.

  10. Web-Based Survey Application to Collect Contextually Relevant Geographic Data With Exposure Times: Application Development and Feasibility Testing

    Science.gov (United States)

    Tobin, Karin; Rudolph, Jonathan; Latkin, Carl

    2018-01-01

    Background Although studies that characterize the risk environment by linking contextual factors with individual-level data have advanced infectious disease and substance use research, there are opportunities to refine how we define relevant neighborhood exposures; this can in turn reduce the potential for exposure misclassification. For example, for those who do not inject at home, injection risk behaviors may be more influenced by the environment where they inject than where they live. Similarly, among those who spend more time away from home, a measure that accounts for different neighborhood exposures by weighting each unique location proportional to the percentage of time spent there may be more correlated with health behaviors than one’s residential environment. Objective This study aimed to develop a Web-based application that interacts with Google Maps application program interfaces (APIs) to collect contextually relevant locations and the amount of time spent in each. Our analysis examined the extent of overlap across different location types and compared different approaches for classifying neighborhood exposure. Methods Between May 2014 and March 2017, 547 participants enrolled in a Baltimore HIV care and prevention study completed an interviewer-administered Web-based survey that collected information about where participants were recruited, worked, lived, socialized, injected drugs, and spent most of their time. For each location, participants gave an address or intersection which they confirmed using Google Map and Street views. Geographic coordinates (and hours spent in each location) were joined to neighborhood indicators by Community Statistical Area (CSA). We computed a weighted exposure based on the proportion of time spent in each unique location. We compared neighborhood exposures based on each of the different location types with one another and the weighted exposure using analysis of variance with Bonferroni corrections to account for

  11. An algorithm to assess methodological quality of nutrition and mortality cross-sectional surveys: development and application to surveys conducted in Darfur, Sudan.

    Science.gov (United States)

    Prudhon, Claudine; de Radiguès, Xavier; Dale, Nancy; Checchi, Francesco

    2011-11-09

    Nutrition and mortality surveys are the main tools whereby evidence on the health status of populations affected by disasters and armed conflict is quantified and monitored over time. Several reviews have consistently revealed a lack of rigor in many surveys. We describe an algorithm for analyzing nutritional and mortality survey reports to identify a comprehensive range of errors that may result in sampling, response, or measurement biases and score quality. We apply the algorithm to surveys conducted in Darfur, Sudan. We developed an algorithm based on internationally agreed upon methods and best practices. Penalties are attributed for a list of errors, and an overall score is built from the summation of penalties accrued by the survey as a whole. To test the algorithm reproducibility, it was independently applied by three raters on 30 randomly selected survey reports. The algorithm was further applied to more than 100 surveys conducted in Darfur, Sudan. The Intra Class Correlation coefficient was 0.79 for mortality surveys and 0.78 for nutrition surveys. The overall median quality score and range of about 100 surveys conducted in Darfur were 0.60 (0.12-0.93) and 0.675 (0.23-0.86) for mortality and nutrition surveys, respectively. They varied between the organizations conducting the surveys, with no major trend over time. Our study suggests that it is possible to systematically assess quality of surveys and reveals considerable problems with the quality of nutritional and particularly mortality surveys conducted in the Darfur crisis.

  12. An algorithm to assess methodological quality of nutrition and mortality cross-sectional surveys: development and application to surveys conducted in Darfur, Sudan

    Directory of Open Access Journals (Sweden)

    Prudhon Claudine

    2011-11-01

    Full Text Available Abstract Background Nutrition and mortality surveys are the main tools whereby evidence on the health status of populations affected by disasters and armed conflict is quantified and monitored over time. Several reviews have consistently revealed a lack of rigor in many surveys. We describe an algorithm for analyzing nutritional and mortality survey reports to identify a comprehensive range of errors that may result in sampling, response, or measurement biases and score quality. We apply the algorithm to surveys conducted in Darfur, Sudan. Methods We developed an algorithm based on internationally agreed upon methods and best practices. Penalties are attributed for a list of errors, and an overall score is built from the summation of penalties accrued by the survey as a whole. To test the algorithm reproducibility, it was independently applied by three raters on 30 randomly selected survey reports. The algorithm was further applied to more than 100 surveys conducted in Darfur, Sudan. Results The Intra Class Correlation coefficient was 0.79 for mortality surveys and 0.78 for nutrition surveys. The overall median quality score and range of about 100 surveys conducted in Darfur were 0.60 (0.12-0.93 and 0.675 (0.23-0.86 for mortality and nutrition surveys, respectively. They varied between the organizations conducting the surveys, with no major trend over time. Conclusion Our study suggests that it is possible to systematically assess quality of surveys and reveals considerable problems with the quality of nutritional and particularly mortality surveys conducted in the Darfur crisis.

  13. Laser fluorosensors : a survey of applications and developments of a versatile sensor

    International Nuclear Information System (INIS)

    Brown, C.E.; Fingas, M.F.; An, J.

    2001-01-01

    Recent advances in the development of laser fluorosensors were reviewed. Laser fluorosensors are used for several purposes including airborne monitoring of oil spills, the exploration of marine petroleum resources, and the monitoring of environmentally important substances such as chlorophyll. Since laser fluorosensors provide their own source of excitation, they can be used during daylight or darkness. Certain compounds such as chlorophyll found in plant material, plankton and in aromatic hydrocarbons from petroleum oils can absorb ultraviolet laser light and become electronically excited. This excitation is quickly removed by the process of fluorescence emission, mostly in the visible region of the spectrum. Natural substances such as chlorophyll can be differentiated from materials such as petroleum oils by careful choice of the excitation laser wavelength and range-gated detection at specific emission wavelengths. This paper described the different system components of laser fluorosensors such as excitation laser source, and detection schemes that make it possible for these sensors to be used for the detection and classification of a wide range of fluorescent compounds. Many fluorosensors have been used as research and development tools on both ship and aircraft to help determine the direction of oil spills. This real-time operating system provides information that can be rapidly transferred to personnel on the ground or at sea to mitigate the effects of an oil spill on marine and coastal environments. Environment Canada's Scanning Laser Environmental Airborne Fluorosensor (SLEAF) was designed to detect, characterize and map oil contamination in marine and coastal shoreline environments. Principle component analysis is used to classify the oil class as light refined, crude or heavy refined and the extent of oil coverage as clean, light, moderate or heavy. 18 refs

  14. Laser fluorosensors : a survey of applications and developments of a versatile sensor

    Energy Technology Data Exchange (ETDEWEB)

    Brown, C.E.; Fingas, M.F.; An, J. [Environment Canada, Ottawa, ON (Canada). Emergencies Science Div

    2001-07-01

    Recent advances in the development of laser fluorosensors were reviewed. Laser fluorosensors are used for several purposes including airborne monitoring of oil spills, the exploration of marine petroleum resources, and the monitoring of environmentally important substances such as chlorophyll. Since laser fluorosensors provide their own source of excitation, they can be used during daylight or darkness. Certain compounds such as chlorophyll found in plant material, plankton and in aromatic hydrocarbons from petroleum oils can absorb ultraviolet laser light and become electronically excited. This excitation is quickly removed by the process of fluorescence emission, mostly in the visible region of the spectrum. Natural substances such as chlorophyll can be differentiated from materials such as petroleum oils by careful choice of the excitation laser wavelength and range-gated detection at specific emission wavelengths. This paper described the different system components of laser fluorosensors such as excitation laser source, and detection schemes that make it possible for these sensors to be used for the detection and classification of a wide range of fluorescent compounds. Many fluorosensors have been used as research and development tools on both ship and aircraft to help determine the direction of oil spills. This real-time operating system provides information that can be rapidly transferred to personnel on the ground or at sea to mitigate the effects of an oil spill on marine and coastal environments. Environment Canada's Scanning Laser Environmental Airborne Fluorosensor (SLEAF) was designed to detect, characterize and map oil contamination in marine and coastal shoreline environments. Principle component analysis is used to classify the oil class as light refined, crude or heavy refined and the extent of oil coverage as clean, light, moderate or heavy. 18 refs.

  15. Mobile application for surveys

    OpenAIRE

    Pifko, Luka

    2012-01-01

    The main objective of the diploma thesis is to produce a system that supports field interviewers. The introduction defines the problem and reasons for making such a system. All the technologies which we have used to achieve the objective are described within. We have made a web application designed for questionnaire designers. The designing of the questionnaires is dynamic and client-side up until the user decides to send the data to the database. In addition to designing questionnaires, ...

  16. Development and Application of the Key Technologies for the Quality Control and Inspection of National Geographical Conditions Survey Products

    Science.gov (United States)

    Zhao, Y.; Zhang, L.; Ma, W.; Zhang, P.; Zhao, T.

    2018-04-01

    The First National Geographical Condition Survey is a predecessor task to dynamically master basic situations of the nature, ecology and human activities on the earth's surface and it is the brand-new mapping geographic information engineering. In order to ensure comprehensive, real and accurate survey results and achieve the quality management target which the qualified rate is 100 % and the yield is more than 80 %, it is necessary to carry out the quality control and result inspection for national geographical conditions survey on a national scale. To ensure that achievement quality meets quality target requirements, this paper develops the key technology method of "five-in-one" quality control that is constituted by "quality control system of national geographical condition survey, quality inspection technology system, quality evaluation system, quality inspection information management system and national linked quality control institutions" by aiming at large scale, wide coverage range, more undertaking units, more management levels, technical updating, more production process and obvious regional differences in the national geographical condition survey and combining with novel achievement manifestation, complicated dependency, more special reference data, and large data size. This project fully considering the domestic and foreign related research results and production practice experience, combined with the technology development and the needs of the production, it stipulates the inspection methods and technical requirements of each stage in the quality inspection of the geographical condition survey results, and extends the traditional inspection and acceptance technology, and solves the key technologies that are badly needed in the first national geographic survey.

  17. Developing the Librarians' Role in Supporting Grant Applications and Reducing Waste in Research: Outcomes from a Literature Review and Survey in the NIHR Research Design Service

    Science.gov (United States)

    Edmunds Otter, Mary L.; Wright, Judy M.; King, Natalie V.

    2017-01-01

    Librarians and information specialists' involvement during the development of grant applications for external funding can save researchers' time, provide specialist support, and contribute to reducing avoidable waste in research. This article presents a survey of information specialists working for the National Institute for Health Research's…

  18. DEVELOPMENT AND APPLICATION OF THE KEY TECHNOLOGIES FOR THE QUALITY CONTROL AND INSPECTION OF NATIONAL GEOGRAPHICAL CONDITIONS SURVEY PRODUCTS

    Directory of Open Access Journals (Sweden)

    Y. Zhao

    2018-04-01

    Full Text Available The First National Geographical Condition Survey is a predecessor task to dynamically master basic situations of the nature, ecology and human activities on the earth’s surface and it is the brand-new mapping geographic information engineering. In order to ensure comprehensive, real and accurate survey results and achieve the quality management target which the qualified rate is 100 % and the yield is more than 80 %, it is necessary to carry out the quality control and result inspection for national geographical conditions survey on a national scale. To ensure that achievement quality meets quality target requirements, this paper develops the key technology method of “five-in-one” quality control that is constituted by “quality control system of national geographical condition survey, quality inspection technology system, quality evaluation system, quality inspection information management system and national linked quality control institutions” by aiming at large scale, wide coverage range, more undertaking units, more management levels, technical updating, more production process and obvious regional differences in the national geographical condition survey and combining with novel achievement manifestation, complicated dependency, more special reference data, and large data size. This project fully considering the domestic and foreign related research results and production practice experience, combined with the technology development and the needs of the production, it stipulates the inspection methods and technical requirements of each stage in the quality inspection of the geographical condition survey results, and extends the traditional inspection and acceptance technology, and solves the key technologies that are badly needed in the first national geographic survey.

  19. Quantum control theory and applications: A survey

    OpenAIRE

    Dong, Daoyi; Petersen, Ian R

    2009-01-01

    This paper presents a survey on quantum control theory and applications from a control systems perspective. Some of the basic concepts and main developments (including open-loop control and closed-loop control) in quantum control theory are reviewed. In the area of open-loop quantum control, the paper surveys the notion of controllability for quantum systems and presents several control design strategies including optimal control, Lyapunov-based methodologies, variable structure control and q...

  20. Development of user applications for earth resources survey data in urban and regional planning in the Puget Sound area

    Science.gov (United States)

    Westerlund, F. V.

    1975-01-01

    User applications of remote sensing in Washington State are described. The first project created a multi-temporal land use/land cover data base for the environs of the Seattle-Tacoma International Airport, to serve planning and management operations of the Port of Seattle. The second is an on-going effort to develop a capability within the Puget Sound Governmental Conference, a council of governments (COG), to inventory and monitor land use within its four county jurisdiction. Developmental work has focused on refinement of land use/cover classification systems applicable at this regional scale and various levels of detail in relation to program requirements of the agency. Related research, refinement of manual methods, user training and approaches to technology transfer are discussed.

  1. Mobile Application Testing in Pakistan: A Survey

    Directory of Open Access Journals (Sweden)

    Muhammad Saqib

    2017-12-01

    Full Text Available Research regarding MAT (Mobile Application Testing in Pakistan is hard to discover and to the best of our knowledge, no work has been done in surveying MAT in Pakistan. In this work, we have examined the current trend and status of MAT in Pakistan. Main objective was to investigate to what extent MAT is currently applied in Pakistan software companies and what experience the companies have with using MAT. Furthermore, efforts were made to find out what testers think about MAT, e.g. issue, advantages and disadvantages of MAT, what factors affects MAT and how they plan to improve MAT. In order to achieve our objectives, we used a comprehensive online survey so we converted our research questions into correspondence survey questions. We served a questionnaire of the survey to 66 testing relevant officials of leading software companies in different cities of Pakistan to develop a model study about general trend and status of MAT which can be generalized all over Pakistan. We received 56 replies in total after over 2 months. After that, we used SPSS tool to analyze the replies of this questionnaire. Cross-Tabulation Analysis and Pearson Chi-square tests have been computed to examine the results. We found some interesting results on current status and practice of MAT in Pakistan software companies.

  2. Survey on Multimedia Technologies for Mobile Learning Applications

    Directory of Open Access Journals (Sweden)

    Paul POCATILU

    2009-01-01

    Full Text Available Mobile technologies are developing very fast. This paper presents a survey on multimedia technologies for mobile learning applications, focusing on multimedia programming techniques for Windows Mobile, Symbian, and Java ME.

  3. Online Learning for Mobile Technology Applications in Health Surveys

    International Development Research Centre (IDRC) Digital Library (Canada)

    Online Learning for Mobile Technology Applications in Health Surveys. In light of ... to develop a globally accessible asynchronous Internet-based training packaged backed by a real-time coaching service. Project ID. 105932. Project status.

  4. Survey of utility robotic applications (1990)

    International Nuclear Information System (INIS)

    1991-08-01

    This special report presents the results of a survey to identify areas of usage where utilities have found robotics to be most beneficial. The survey, which was conducted by U/M RUG, an ad hoc robotics group, should be of interest to all utilities interested in proven applications. The survey shows that robotics are finding increasing use in maintenance tasks, and in cleanup applications. Extended usage of precision positioning, dexterity, intelligence and mobility is not yet apparent. Improvements in these areas would greatly aid maintenance applications of robotics. 7 figs

  5. Survey of potential applications of superconducting suspensions

    International Nuclear Information System (INIS)

    Rao, D.K.; Bupara, S.S.

    1993-01-01

    The purpose of this report is to survey the recent developments in applying the bulk superconductors to mechanical applications. These applications, called superconducting suspensions, can be broadly divided into three groups - Passive Magnetic Bearings, Passive Superconducting Dampers and Active Superconducting Bearings. Basically, passive magnetic bearings utilize bulk superconductors to support a rotating shaft without contact while active superconducting bearings employ superconducting wires. Passive superconducting dampers, on the other hand, dissipate energy from a vibrating component. Over the past one year, dramatic improvements have been made in processing large-size specimens made of high grade bulk superconductors. As a result, they can meet the size requirements and load capacity requirements of many applications. With this size-scale up, one can utilize them in a wider number of applications than what was possible a few years back. At present several organizations have demonstrated the capability of passive magnetic bearings. The targeted applications include miniature cryoturboexpanders, cryoturbopumps, energy storage wheels and turbomolecular pumps. These demonstrations indicate that the passive magnetic bearings are closer to technology maturity. (orig.)

  6. The LLL algorithm survey and applications

    CERN Document Server

    Nguyen, Phong Q

    2010-01-01

    The first book to offer a comprehensive view of the LLL algorithm, this text surveys computational aspects of Euclidean lattices and their main applications. It includes many detailed motivations, explanations and examples.

  7. Wordpress web application development

    CERN Document Server

    Ratnayake, Rakhitha Nimesh

    2015-01-01

    This book is intended for WordPress developers and designers who want to develop quality web applications within a limited time frame and for maximum profit. Prior knowledge of basic web development and design is assumed.

  8. The Development of Precise Engineering Surveying Technology

    Directory of Open Access Journals (Sweden)

    LI Guangyun

    2017-10-01

    Full Text Available With the construction of big science projects in China, the precise engineering surveying technology developed rapidly in the 21th century. Firstly, the paper summarized up the current development situation for the precise engineering surveying instrument and theory. Then the three typical cases of the precise engineering surveying practice such as accelerator alignment, industry measurement and high-speed railway surveying technology are focused.

  9. Mongoose for application development

    CERN Document Server

    Holmes, Simon

    2013-01-01

    This book is a mini tutorial full of code examples and strategies to give you plenty of options when building your own applications with MongoDB.This book is ideal for people who want to develop applications on the Node.js stack quickly and efficiently. Prior knowledge of the stack is not essential as the book briefly covers the installation of the core components and builds all aspects of the example application. The focus of the book is on what Mongoose adds to you applications, so experienced Node.js developers will also benefit.

  10. Survey on industrial applications of radioactive tracers

    International Nuclear Information System (INIS)

    Kim, Jae Rok; Yoo, Young Soo; Lee, Jong Doo; Awh, Ok Doo; Kim, Jun Hyung

    1986-12-01

    Current status and future feasibilities of industrial tracer applications in the Republic of Korea have been surveyed. Microleak detection using Krypton-85 in eight electronics industrial companies, and efficiency tests of steam generators in four nuclear power plants using Sodium-24 are the principal applications in Korea. Future applications are expected for mercury inventory in one soda industrial company, and alkali movement studies in two cement industrial companies. Korean industries expressed deep interest in leak detection in underground pipelines, abrasion/corrosion studies, mixing rate and residence time measurements. (Author)

  11. Survey of potential electronic applications of high temperature superconductors

    International Nuclear Information System (INIS)

    Hammond, R.B.; Bourne, L.C.

    1991-01-01

    In this paper the authors present a survey of the potential electronic applications of high temperature superconductor (HTSC) thin films. During the past four years there has been substantial speculation on this topic. The authors will cover only a small fraction of the potential electronic applications that have been identified. Their treatment is influenced by the developments over the past few years in materials and device development and in market analysis. They present their view of the most promising potential applications. Superconductors have two important properties that make them attractive for electronic applications. These are (a) low surface resistance at high frequencies, and (b) the Josephson effect

  12. Professional mobile application development

    CERN Document Server

    McWherter, Jeff

    2012-01-01

    Create applications for all major smartphone platforms Creating applications for the myriad versions and varieties of mobile phone platforms on the market can be daunting to even the most seasoned developer. This authoritative guide is written in such as way that it takes your existing skills and experience and uses that background as a solid foundation for developing applications that cross over between platforms, thereby freeing you from having to learn a new platform from scratch each time. Concise explanations walk you through the tools and patterns for developing for all the mobile platfo

  13. Application of gamma spectrometry survey and discussion on data processing

    International Nuclear Information System (INIS)

    Li Ji'an; He Jianguo

    2008-01-01

    This paper analyzed and discussed the different opinions about the measured parameters of gamma spectrometry data, introduced the effect of gamma spectrometry survey to the search for sandstone type uranium deposit. The author believes that it is very necessary to perform some ground gamma spectrometry survey and enforce the development and application of airborne radiometric data so as to carry out the role of gamma spectrometry in the exploration of sandstone type uranium deposit. (authors)

  14. Results of the PERI survey of SciDAC applications

    International Nuclear Information System (INIS)

    Supinski, Bronis R de; Hollingworth, Jeffrey K; Moore, Shirley; Worley, Patrick H

    2007-01-01

    The Performance Engineering Research Institute (PERI) project focuses on achieving superior performance for Scientific Discovery through Advanced Computing (SciDAC) applications on leadership class machines through cutting-edge research in performance modeling and automated performance tuning. This focus requires coordinated activities to engage SciDAC application teams. The initial application engagement activity was a survey of these teams to determine their performance goals, the criticality of those goals, current performance of their applications, application characteristics relevant to performance and their plans for future optimization. Using a web-based questionnaire, PERI researchers have worked with application developers to provide this information for over twenty-five applications. This paper describes the initial analysis of the application characteristics and performance goals, as well as current and future application engagement activities driven by these results. While the survey was conducted primarily to meet PERI needs, the results represent a snapshot of the state of SciDAC code development and may be of use to the DOE community at large. Overall, the results show that SciDAC application teams are engaged in significant new code development, which will require flexible performance optimization techniques that can improve performance as the applications evolve

  15. Lift application development cookbook

    CERN Document Server

    Garcia, Gilberto T

    2013-01-01

    Lift Application Development Cookbook contains practical recipes on everything you will need to create secure web applications using this amazing framework.The book first teaches you basic topics such as starting a new application and gradually moves on to teach you advanced topics to achieve a certain task. Then, it explains every step in detail so that you can build your knowledge about how things work.This book is for developers who have at least some basic knowledge about Scala and who are looking for a functional, secure, and modern web framework. Prior experience with HTML and JavaScript

  16. Professional Tizen application development

    CERN Document Server

    Jaygarl, HoJun; Kim, YoonSoo; Choi, Eunyoung; Bradwick, Kevin; Lansdell

    2014-01-01

    Create powerful, marketable applications with Tizen for the smartphone and beyond  Tizen is the only platform designed for multiple device categories that is HTML5-centric and entirely open source. Written by experts in the field, this comprehensive guide includes chapters on both web and native application development, covering subjects such as location and social features, advanced UIs, animations, sensors and multimedia. This book is a comprehensive resource for learning how to develop Tizen web and native applications that are polished, bug-free and ready to sell on a range of smart dev

  17. Developing Large Web Applications

    CERN Document Server

    Loudon, Kyle

    2010-01-01

    How do you create a mission-critical site that provides exceptional performance while remaining flexible, adaptable, and reliable 24/7? Written by the manager of a UI group at Yahoo!, Developing Large Web Applications offers practical steps for building rock-solid applications that remain effective even as you add features, functions, and users. You'll learn how to develop large web applications with the extreme precision required for other types of software. Avoid common coding and maintenance headaches as small websites add more pages, more code, and more programmersGet comprehensive soluti

  18. Express web application development

    CERN Document Server

    Yaapa, Hage

    2013-01-01

    Express Web Application Development is a practical introduction to learning about Express. Each chapter introduces you to a different area of Express, using screenshots and examples to get you up and running as quickly as possible.If you are looking to use Express to build your next web application, ""Express Web Application Development"" will help you get started and take you right through to Express' advanced features. You will need to have an intermediate knowledge of JavaScript to get the most out of this book.

  19. Pressurized water reactor and its development for nuclear power plants A survey the beginning, development, transfer, industrial application and; the future of a technology

    International Nuclear Information System (INIS)

    Khazaneh, Reza.

    1996-01-01

    Discussion about PWR type reactors is forwarded to production and technology developments in various countries. Technology transfer to different countries is reviewed in chapter two. The third chapter is about specifications and main components of the reactors. The fourth chapter outlooks to safety in nuclear technology which has a crucial importance in nuclear technology. The first PWR type reactor built in Russia has had some deficiencies; after that, i.e. in the eighties its quality improved and its criteria was met with international criteria. The sixth chapter describe reactor operation and some problems due to its operation. The use of advanced reactors which has had better quality in respect to its safety in the eighties is presented in seventh chapter. The final chapter is devoted to the new generation of reactor design for twenty first century

  20. [Development of rapid setting-drying device for herbarium specimens and its application in survey of Chinese materia medica resources in Anhui].

    Science.gov (United States)

    Zheng, Han; Xu, Tao; Li, Chuan-Run; Sun, Xiao-Mei; Xiang, Long; Zhao, Wei-Bo; Liu, He-Ling; Zhou, Jian-Li; Yang, Qing-Shan; Peng, Dai-Yin

    2016-07-01

    Herbarium specimens are the basis for the plant classification and indispensable media in teaching, scientific research and resources investigation. They have also played an important role in identifying and producing traditional Chinese medicine. High-quality herbarium specimens shall meet high requirements for integrity, smoothness, color and fabricating efficiency. Therefore, we designed a rapid setting and drying device for herbarium specimens, which could make the herbarium specimens smooth, colorful and not easy to mildew. In this paper, we pointed out the deficiency of traditional methods in making herbarium specimens, and introduced the structure and working principle of the device. Besides, we also discussed the effect of the device in setting and drying herbarium specimens and its application in the fourth national survey of the Chinese material medica resources (CMMR) in Anhui province. As a result, the device provides new ideas for producing herbarium specimens, with a reasonable design, good uniformity, high efficiency, safety and portability, and so is worthy of promotion and application in the national survey of CMMR. Copyright© by the Chinese Pharmaceutical Association.

  1. Application of InSAR and gravimetric surveys for developing construction codes in zones of land subsidence induced by groundwater extraction: case study of Aguascalientes, Mexico

    Directory of Open Access Journals (Sweden)

    J. Pacheco-Martínez

    2015-11-01

    Full Text Available Interferometric Synthetic Aperture Radar (InSAR has become a valuable tool for surface deformation monitoring, including land subsidence associated with groundwater extraction. Another useful tools for studying Earth's surface processes are geophysical methods such as Gravimetry. In this work we present the application of InSAR analysis and gravimetric surveying to generate valuable information for risk management related to land subsidence and surface faulting. Subsidence of the city of Aguascalientes, Mexico is presented as study case. Aguascalientes local governments have addressed land subsidence issues by including new requirements for new constructions projects in the State Urban Construction Code. Nevertheless, the resulting zoning proposed in the code is still subjective and not clearly defined. Our work based on gravimetric and InSAR surveys is aimed for improving the subsidence hazard zoning proposed in the State Urban Code in a more comprehensive way. The study includes a 2007–2011 ALOS InSAR time-series analysis of the Aguascalientes valley, an interpretation of the compete Bouguer gravimetric anomaly of the Aguascalientes urban area, and the application of time series and gravimetric anomaly maps for improve the subsidence hazard zoning of Aguascalientes City.

  2. Shopify application development

    CERN Document Server

    Larkin, Michael

    2014-01-01

    This is an easy-to follow manual that will guide you through the entire process of application development with Shopify, beginning with the installation and configuration of your local development environment for your app to the deployment of the app to Heroku. If you are a web developer or a designer who wants to extend Shopify stores by building apps, then this book is for you. A basic understanding of programming concepts and some familiarity with Shopify is all that is required to get started with Shopify app development.

  3. Continuing Professional Development in the quantity surveying ...

    African Journals Online (AJOL)

    1991-01-01

    Jan 1, 1991 ... The research established that quantity surveyors regarded handing in their CPD ... Surveying, Walter Sisulu University, PO Box 1421, East London, 5200, South Africa. ... Keywords: Continuing professional development, quantity surveying, perception .... In spite of this opportunity enshrined in the Act, the.

  4. Application of engineering surveying in engineering industry

    Directory of Open Access Journals (Sweden)

    Lucia Forgáčová

    2005-11-01

    Full Text Available This is a presentation of the application of surveying principles used in a process of building the electrolytic tinning line at the U.S.Steel s.r.o. Kosice. The work involved is setting up a new network of measuring points, as well as the effective implementation of suitable methodologies, instruments and measuring tools. All of these were focal points for the survey, required during the installation of machinery units for the new tinning line. The coil producing technology utilised on the line entails a high speed movement. In this context all methods and final measurements were adapted to a very high standard of precision in order to ensure a safe working environment and exclude the risk of malfunctions in the final production stage. The smallest variations in the positioning of machinery units, compared with technical drawings, could rise a danger of coil breakdown, line malfunction or personal injury.

  5. Developing Web Applications

    CERN Document Server

    Moseley, Ralph

    2007-01-01

    Building applications for the Internet is a complex and fast-moving field which utilizes a variety of continually evolving technologies. Whether your perspective is from the client or server side, there are many languages to master - X(HTML), JavaScript, PHP, XML and CSS to name but a few. These languages have to work together cleanly, logically and in harmony with the systems they run on, and be compatible with any browsers with which they interact. Developing Web Applications presents script writing and good programming practice but also allows students to see how the individual technologi

  6. Development of a Microsoft Excel tool for one-parameter Rasch model of continuous items: an application to a safety attitude survey

    Directory of Open Access Journals (Sweden)

    Tsair-Wei Chien

    2017-01-01

    Full Text Available Abstract Background Many continuous item responses (CIRs are encountered in healthcare settings, but no one uses item response theory’s (IRT probabilistic modeling to present graphical presentations for interpreting CIR results. A computer module that is programmed to deal with CIRs is required. To present a computer module, validate it, and verify its usefulness in dealing with CIR data, and then to apply the model to real healthcare data in order to show how the CIR that can be applied to healthcare settings with an example regarding a safety attitude survey. Methods Using Microsoft Excel VBA (Visual Basic for Applications, we designed a computer module that minimizes the residuals and calculates model’s expected scores according to person responses across items. Rasch models based on a Wright map and on KIDMAP were demonstrated to interpret results of the safety attitude survey. Results The author-made CIR module yielded OUTFIT mean square (MNSQ and person measures equivalent to those yielded by professional Rasch Winsteps software. The probabilistic modeling of the CIR module provides messages that are much more valuable to users and show the CIR advantage over classic test theory. Conclusions Because of advances in computer technology, healthcare users who are familiar to MS Excel can easily apply the study CIR module to deal with continuous variables to benefit comparisons of data with a logistic distribution and model fit statistics.

  7. Development of a Microsoft Excel tool for one-parameter Rasch model of continuous items: an application to a safety attitude survey.

    Science.gov (United States)

    Chien, Tsair-Wei; Shao, Yang; Kuo, Shu-Chun

    2017-01-10

    Many continuous item responses (CIRs) are encountered in healthcare settings, but no one uses item response theory's (IRT) probabilistic modeling to present graphical presentations for interpreting CIR results. A computer module that is programmed to deal with CIRs is required. To present a computer module, validate it, and verify its usefulness in dealing with CIR data, and then to apply the model to real healthcare data in order to show how the CIR that can be applied to healthcare settings with an example regarding a safety attitude survey. Using Microsoft Excel VBA (Visual Basic for Applications), we designed a computer module that minimizes the residuals and calculates model's expected scores according to person responses across items. Rasch models based on a Wright map and on KIDMAP were demonstrated to interpret results of the safety attitude survey. The author-made CIR module yielded OUTFIT mean square (MNSQ) and person measures equivalent to those yielded by professional Rasch Winsteps software. The probabilistic modeling of the CIR module provides messages that are much more valuable to users and show the CIR advantage over classic test theory. Because of advances in computer technology, healthcare users who are familiar to MS Excel can easily apply the study CIR module to deal with continuous variables to benefit comparisons of data with a logistic distribution and model fit statistics.

  8. Laravel application development cookbook

    CERN Document Server

    Matula, Terry

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks.A short and precise guide to get you started with EaselJS , helping you to create some cool applications and games.EaselJS greatly simplifies application development in HTML5 Canvas using a syntax and an architecture very similar to the ActionScript 3.0 language. As a result, Flash / Flex developers will immediately feel at home but it's very easy to learn even if you've never opened Flash in your life. The book targets Web designers, animators,

  9. Android Studio application development

    CERN Document Server

    Zapata, Belén Cruz

    2013-01-01

    A practical guide, which will show you how to create Android applications using the new Google official IDE, Android Studio.If you are a developer who wants to learn the key features of Android Studio, and learn how to create their first app, this book is ideal for you! Developers interested in this book should be familiar with the object- oriented programming paradigm, and the Java programming language. It is also recommended that you understand the main characteristics of the Android mobile system.

  10. Development Application - Terra Nova Development - Development Application Summary

    International Nuclear Information System (INIS)

    1996-01-01

    This summary is part of the application for approval of the development of the Terra Nova Field off the coast of Newfoundland, prepared and submitted by Petro-Canada, on behalf of, and with the cooperation of its co-proponents. The full application consists of five parts, comprising the development plan itself, the Canada-Newfoundland benefits plan detailing commitments with regards to contracts and employment, the environmental impact statement concerning the impact of development on the physical and biological environment, and a statement of socio-economic impacts, characterizing existing and projected impacts of the development on the fisheries, industry, employment, demography, social and public infrastructures and facilities, and socio-cultural issues

  11. A survey of recent applications of TRIGA research reactors

    International Nuclear Information System (INIS)

    Chesworth, R.H.

    1972-01-01

    Some relatively recent, somewhat novel, or unusual applications in the United States were surveyed. Several specific applications will be discussed briefly. They are divided into the major areas of nondestructive testing, medical applications, activation analysis, and special testing

  12. Multicomponent seismic applications in coalbed methane development

    Energy Technology Data Exchange (ETDEWEB)

    Lawton, D.; Trend, S. [Calgary Univ., AB (Canada). Dept. of Geology and Geophysics

    2004-07-01

    Seismic applications for coalbed methane (CBM) development are used to address the following challenges: lateral continuity of coal zones; vertical continuity of coal seams; permeability of cleats and fractures; coal quality and gas content; wet versus dry coal zones; and, monitoring storage of greenhouse gases. This paper presented a brief description of existing seismic programs, including 2-D and 3-D surface seismic surveys; multicomponent seismic surveys; vertical seismic profiles; cross-well seismic surveys; and, time-lapse seismic surveys. A comparative evaluation of their use in the Horseshoe Canyon Formation and the Ardley Formation was presented. The study showed that variations in reservoir properties resulting from gas production and dewatering can be effectively imaged using seismic surveys. Seismic surveys are useful in reservoir management, monitoring sweep efficiency during enhanced natural gas from coal (NGC) production, monitoring disposal of produced water and verifying storage of carbon dioxide for carbon credits. tabs., figs.

  13. Android application development with Maven

    CERN Document Server

    Papapetrou, Patroklos

    2015-01-01

    Android Application Development with Maven is intended for Android developers or devops engineers who want to use Maven to effectively develop quality Android applications. It would be helpful, but not necessary, if you have some previous experience with Maven.

  14. Research Resources Survey: Radiology Junior Faculty Development.

    Science.gov (United States)

    Krupinski, Elizabeth A; Votaw, John R

    2015-07-01

    To assess resources available to junior faculty in US academic radiology departments for research mentorship and funding opportunities and to determine if certain resources are more common in successful programs. An anonymous survey covering scientific environment and research mentorship and was sent to vice-chairs of research of radiology departments. Results were evaluated to identify practices of research programs with respect to mentorship, resources, and opportunities. Academy of Radiology Research's 2012 National Institutes of Health (NIH) grants and awards list was used to determine if environment and practices correlate with funding. There was a 51% response rate. A greater fraction of clinical faculty gets promoted from assistant to associate professor than research faculty. Research faculty overall submits more funding applications. Most programs support start-up costs and K-awards. Over half of the departments have a vice-chair for faculty development, and most have formal mentorship programs. Faculty members are expected to teach, engage in service, publish, and apply for and get research funding within 3 years of hire. Top-tier programs as judged by NIH awards have a combination of MDs who devote >50% effort to research and PhD faculty. Key factors holding back both clinical and research junior faculty development were motivation, resources, and time, although programs reported high availability of resources and support at the department level. Better marketing of resources for junior faculty, effort devoted to mentoring clinical faculty in research, and explicit milestones/expectations for achievement could enhance junior faculty success, promote interest in the clinician–scientist career path for radiologists, and lead to greater research success.

  15. Developing iPhone application

    OpenAIRE

    Nebo, Charles

    2015-01-01

    IPhone application popularity and demand are continuously on the increase since 2008 when Apple launched iPhone. Consequently, many applications are built targeting different user needs. But developing iPhone applications do have challenges. This research study explores current development study for developing iPhone application where the development environment and technologies are problematic. This paper intends to review some software development methodologies, methods, and techniques for ...

  16. Survey of heat-pipe application under nuclear environment

    International Nuclear Information System (INIS)

    Tsuyuzaki, Noriyoshi; Saito, Takashi; Okamoto, Yoshizo; Hishida, Makoto; Negishi, Kanji.

    1986-11-01

    Heat pipes today are employed in a wide variety of special heat transfer applications including nuclear reactor. In this nuclear technology area in Japan, A headway speed of the heat pipe application technique is not so high because of safety confirmation and investigation under each developing step. Especially, the outline of space craft is a tendency to increase the size. Therefore, the power supply is also tendency to increase the outlet power and keep the long life. Under SP-100 project, the development of nuclear power supply system which power is 1400 - 1600 KW thermal and 100 KW electric power is steadily in progress. Many heat pipes are adopted for thermionic conversion and coolant system in order to construct more safety and light weight system for the project. This paper describes the survey of the heat pipe applications under the present and future condition for nuclear environment. (author)

  17. Continuing Professional Development in the quantity surveying ...

    African Journals Online (AJOL)

    This research study was conducted in order to investigate Continuing Professional Development (CPD) in the South African quantity surveying profession. The study further aimed to establish the reasons why some quantity surveyors do not acquire the required CPD hours and face losing their professional registration with ...

  18. Field Application of the Micro Biological Survey Method for a Simple and Effective Assessment of the Microbiological Quality of Water Sources in Developing Countries.

    Science.gov (United States)

    Arienzo, Alyexandra; Sobze, Martin Sanou; Wadoum, Raoul Emeric Guetiya; Losito, Francesca; Colizzi, Vittorio; Antonini, Giovanni

    2015-08-25

    According to the World Health Organization (WHO) guidelines, "safe drinking-water must not represent any significant risk to health over a lifetime of consumption, including different sensitivities that may occur between life stages". Traditional methods of water analysis are usually complex, time consuming and require an appropriately equipped laboratory, specialized personnel and expensive instrumentation. The aim of this work was to apply an alternative method, the Micro Biological Survey (MBS), to analyse for contaminants in drinking water. Preliminary experiments were carried out to demonstrate the linearity and accuracy of the MBS method and to verify the possibility of using the evaluation of total coliforms in 1 mL of water as a sufficient parameter to roughly though accurately determine water microbiological quality. The MBS method was then tested "on field" to assess the microbiological quality of water sources in the city of Douala (Cameroon, Central Africa). Analyses were performed on both dug and drilled wells in different periods of the year. Results confirm that the MBS method appears to be a valid and accurate method to evaluate the microbiological quality of many water sources and it can be of valuable aid in developing countries.

  19. Starting and developing a surveying business

    CERN Document Server

    Imber, Austen

    2013-01-01

    Starting and Developing a Surveying Business shows how surveyors can develop their own successful small business. For surveyors thinking of taking this step, guidance is provided on the pros and cons which will help the right decision to be made, and the key factors which help see the business through its early stages. For surveyors already running their own small business, consideration is given to factors which will help profitability and growth potential.

  20. Nuclear applications for development

    International Nuclear Information System (INIS)

    2007-01-01

    Building capacity for the safe application of nuclear technologies produces tangible socioeconomic benefits to developing countries. Identifying killer infections such as extrapulmonary tuberculosis and drug resistant strains of HIV/AIDS in sub-Saharan Africa; Monitoring malaria drug resistance in Myanmar; - Teaching Jordanian farmers how to produce viable crops on salty soils; - Investigating water resources deep beneath the Nubian Desert; - Fighting acid rain in Poland; - Creating an energy strategy for Latin America; - Strengthening the security of nuclear sources in Kazakhstan. These are just some of examples of the practical ways in which the International Atomic Energy Agency (IAEA) fulfils its mandate to 'accelerate and enlarge the contribution of atomic energy to peace, health, and prosperity throughout the world'. And some of the reasons the IAEA's long history of global action was recognized through the Nobel Peace Prize in 2005. This list of activities reflects the diverse needs of Member States. It also demonstrates the enormous potential of nuclear technology and the breadth of expertise that lie within three IAEA technical programmes: Nuclear Sciences and Applications, Nuclear Energy, and Nuclear Safety and Security. More importantly, it speaks to the success of a determined effort to facilitate knowledge sharing and technology transfer through a cross-cutting mechanism known as the technical cooperation programme. Each year, the technical cooperation programme disburses approximately US $90 million, all of which is acquired through voluntary contributions from Member States. The programme concentrates on building capacity through training and education, expert advice, and equipment delivery. It is currently active in more than 110 countries across four geographic regions: Africa, Asia and the Pacific, Europe and Latin America

  1. Concept and development of information flow diagram for literature survey

    International Nuclear Information System (INIS)

    Noda, Masaru; Sato, Shoko; Ueda, Tadashi; Tsuchi, Hiroyuki; Koike, Akihisa

    2007-01-01

    The Information Flow Diagram for Literature Survey (IFDLS) has been developed to manage information and procedure in the literature survey phase of the PTAs selection process. It is a tool utilizing information technology, which can organize, analyze, and evaluate information from literature survey and manage their process systematically. IFDLS is able to show the flow of information and data, and the history of information management processing. Information coverage and quality is not homogenous throughout the country and, in some areas, there may not even be sufficient data available to be able to reach a judgment on conformity with the site-specific evaluation factors (SSEF). Literature surveys could only be conducted on a volunteer area before it is nominated as a PIA. However, the absence of information on any factor mentioned will not constitute disqualification of the area. On the contrary, an attempt to compare these sites with analogous areas in Japan will be done to assemble sufficient data and consequently make a decision on whether to proceed further. The application of IFDLS to literature survey phase of the PIA selection process is being proposed. The concept, construction, application and evolution of IFDLS towards application phase on a trial basis are discussed. (authors)

  2. Fiscal 1999 research and development of technologies for practical application of photovoltaic power generation systems. Development of ultrahigh-efficiency crystalline compound solar cell manufacturing technology (Survey of peripheral element technologies - Survey of environmental adaptation of next-generation solar cell development); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Chokokoritsu kessho kagobutsu taiyo denchi no seizo gijutsu kaihatsu (shuhen yoso gijutsu ni kansuru chosa kenkyu - jisedai taiyo denchi kaihatsu kankyo tekioka chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Surveys are conducted of photovoltaic power system development projects and their utilization in Japan and overseas, and a discussion is made on the progress, technical challenges, effects, and implementation systems relating to the solar cell application technology development project under the New Sunshine Program. Compiled in the report are the results of surveys of the research and development of photovoltaic power systems and their diffusion in the U.S. and European nations, and the research and development strategies for and the trends of the development of various types of solar cells in these countries. The trends of research and development of non-conventional type solar cells are also collected, which include 3 cases of TPV (thermophotovoltaic) devices, 5 cases of new inorganic materials, 1 case of new organic materials, and 4 cases of dye-sensitized solar cells. In relation to the status of resources of crystalline compound-based solar cell materials, raw materials for solar cells other than silicon are taken up, and their reserves, manufacturing methods, quantities yielded and consumed, costs, etc., are surveyed. These are all taken into consideration in discussing the basic approach to the study of future research and development as it ought to be. (NEDO)

  3. Fuel- and wood consumption surveys in developing countries: a proposal of an efficient low-cost method and the results of its application in eastern Ethiopia

    Energy Technology Data Exchange (ETDEWEB)

    Poschen, P.; Eiche, G.

    1986-01-01

    The method involves a preliminary survey to establish areas homogeneous for temperature and rainfall regime, natural vegetation, agricultural systems, wood fuel substitutes, housing and cooking habits. Locations are sampled within such areas to reflect variability in presence of forests and other fuel and wood resources, population density, and access to markets. Households are sampled within a location to cover variation in social structure. Results from a survey in the Hararghe highlands differ markedly from previous Ethiopia-wide estimates and show that remaining wood resources supply less than half of the fuel requirements. An effective community forestry programme is urgently required. (Refs. 9).

  4. Evaluating Mobile Survey Tools (MSTs for Field-Level Monitoring and Data Collection: Development of a Novel Evaluation Framework, and Application to MSTs for Rural Water and Sanitation Monitoring

    Directory of Open Access Journals (Sweden)

    Michael B. Fisher

    2016-08-01

    Full Text Available Information and communications technologies (ICTs such as mobile survey tools (MSTs can facilitate field-level data collection to drive improvements in national and international development programs. MSTs allow users to gather and transmit field data in real time, standardize data storage and management, automate routine analyses, and visualize data. Dozens of diverse MST options are available, and users may struggle to select suitable options. We developed a systematic MST Evaluation Framework (EF, based on International Organization for Standardization/International Electrotechnical Commission (ISO/IEC software quality modeling standards, to objectively assess MSTs and assist program implementers in identifying suitable MST options. The EF is applicable to MSTs for a broad variety of applications. We also conducted an MST user survey to elucidate needs and priorities of current MST users. Finally, the EF was used to assess seven MSTs currently used for water and sanitation monitoring, as a validation exercise. The results suggest that the EF is a promising method for evaluating MSTs.

  5. Neutron tomography: A survey and some recent applications

    International Nuclear Information System (INIS)

    Rhodes, E.A.; Morman, J.A.; McClellan, G.C.

    1990-01-01

    A survey is given of recent developments in selected areas of neutron tomography, within the context of several applications Argonne is involved in, including high penetration of reactor-fuel bundles in thick containers (involving Transient Reactor Test Facility (TREAT) and NRAD facilities), dual-energy hydrogen imaging (performed at Intense Pulsed Neutron Source), dynamic coarse-resolution emission tomography of reactor fuel under test (a proposed modification to the TREAT hodoscope), and an associated-particle system that uses neutron flight-time to electronically collimate transmitted neutrons and to tomographically image nuclides identified by reaction gamma-rays. 23 refs., 12 figs

  6. Nanobiomaterials development and applications

    CERN Document Server

    Papaefthymiou-Davis, Georgia C

    2013-01-01

    Nanomaterials in Nanobiotechnologies: Preparation, Characterization, and ApplicationsBio-Inspired Magnetic NanoparticlesGeorgia C. Papaefthymiou and Eamonn DevlinNanoparticles for BioimagingHye Sun Park and Yong Taik LimBiomedical Applications of Dendrimer Porphyrin or PhthalocyanineWoo-Dong Jang and Won-Gun KohPolymeric Nanoparticles in Cancer TherapyHeebeom Koo, Ji Young Yhee, Ick Chan Kwon, Kwangmeyung Kim, and Ramesh SubbiahCarbon Nanotube BioconjugatesMonica Samal, Dong Kee Yi, and Shashadhar SamalBiocatalytic NanosystemsJaehong Lim and Su Seong LeeMagnetically Induced Hyperthermia for Biomedical ApplicationsMichael Fardis, Ioannis Rabias, Georgios Diamantopoulos, Eleni Karakosta, Danai Tsitrouli, Vassilios Tzitzios, and Georgios PapavassiliouSoft Block Nanobuilding: New Preparation Routes of Soft Nanomaterials Using BiomoleculesEngineered Biomolecules as NanomaterialsYun Jung Lee and Ki Tae NamNanomaterials and Bio-MEMS: Nano- and Microscale Hybridization of Materials and ApplicationsMicrofluidic-Based ...

  7. Laravel application development blueprints

    CERN Document Server

    Kiliçdagi, Arda

    2013-01-01

    Follow along as we work together to build 10 different applications using Laravel 4. Since each chapter is devoted to the design of a different application, there is no need to read the book in any particular order. Instead, you can pick and choose the blueprints that are of most interest to you and dive right in.This book is for intermediate to advanced level PHP programmers who want to master Laravel. It's assumed that you will have some experience with PHP already. This book is also for those who are already using a different PHP framework and are looking for better solutions.

  8. Development of carborne gamma-ray survey system

    International Nuclear Information System (INIS)

    Sakamoto, Ryuichi; Tsutsumi, Masahiro

    1999-01-01

    A carborne γ-ray survey system was developed aiming at implementation of environmental radiation investigation in and around Chernobyl area after the accident. This system consists of a dose rate meter, a GPS and a personal computer, and acquires γ-ray dose rates and positional data using two serial ports of the computer. It is indispensable to acquire these two kinds of data simultaneously for carborne γ-ray survey in a large area. A feature of the system is to be able to get these data continuously by means of a simple programming. This system has been used in and around Chernobyl area for a few years, and it has worked without any troubles. The outline of this survey system, which is applicable for configuration of environmental radiation data acquisition system is reported with some results in Chernobyl. (author)

  9. Survey and analysis of federally developed technology

    Energy Technology Data Exchange (ETDEWEB)

    Reed, J.E.; Conrad, J.L.

    1983-02-01

    The methodology and results of a test effort to determine whether there exist unexpected opportunities for the direct transfer of technologies from federal laboratories to industry are presented. Specifically, the latest results of six federal laboratories with potential application in the pulp and paper industry, particularly those results applicable to improving energy productivity, were evaluated, cataloged, and distributed to industry representatives to gauge their reaction. The principal methodological steps in this effort were the development of a taxonomy of the pulp and paper industry, identification of industry needs and laboratory capabilities, laboratory visits, review of technology findings with industry, and evaluation and compilation of industry responses.

  10. Survey of Instant Messaging Applications Encryption Methods

    OpenAIRE

    Kabakuş, Abdullah; Kara, Resul

    2015-01-01

    Instant messaging applications has already taken the place of traditional Short Messaging Service (SMS) and Multimedia Messaging Service (MMS) due to their popularity and usage easement they provide. Users of instant messaging applications are able to send both text and audio messages, different types of attachments such as photos, videos, contact information to their contacts in real time. Because of instant messaging applications use internet instead of Short Message Service Technical Reali...

  11. Heroku cloud application development

    CERN Document Server

    Hanjura, Anubhav

    2014-01-01

    An easy-to-follow, hands-on guide that clearly explains the various components of the Heroku platform and provides step-by-step guidance as well as numerous examples on how to build and troubleshoot robust and scalable production-ready web applications on the Heroku platform.This book is intended for those who want to learn Heroku the right way. Perhaps you are new to Heroku or are someone who has heard about Heroku but have not built anything significant with it. You should have knowledge or familiarity with cloud computing and basic knowledge of database and network deployment.

  12. Learning Spring application development

    CERN Document Server

    Soni, Ravi Kant

    2015-01-01

    This book is intended for those who are interested in learning the core features of the Spring Framework. Prior knowledge of Java programming and web development concepts with basic XML knowledge is expected.

  13. Survey, applications, and prospects of Johnson noise thermometry

    International Nuclear Information System (INIS)

    Blalock, T.V.; Shepard, R.L.

    1981-01-01

    Significant progress in the field of Johnson noise thermometry has occurred since the 1971 survey of Kamper. This paper will review the foundation work of Johnson noise thermometry, survey the basic methods which do not utilize quantum devices for noise thermometry for industrial temperatures, and present some applications of noise thermometry in temperature scale metrology and process temperature instrumentation. 35 references

  14. Telemedicine for Developing Countries. A Survey and Some Design Issues.

    Science.gov (United States)

    Combi, Carlo; Pozzani, Gabriele; Pozzi, Giuseppe

    2016-11-02

    Developing countries need telemedicine applications that help in many situations, when physicians are a small number with respect to the population, when specialized physicians are not available, when patients and physicians in rural villages need assistance in the delivery of health care. Moreover, the requirements of telemedicine applications for developing countries are somewhat more demanding than for developed countries. Indeed, further social, organizational, and technical aspects need to be considered for successful telemedicine applications in developing countries. We consider all the major projects in telemedicine, devoted to developing countries, as described by the proper scientific literature. On the basis of such literature, we want to define a specific taxonomy that allows a proper classification and a fast overview of telemedicine projects in developing countries. Moreover, by considering both the literature and some recent direct experiences, we want to complete such overview by discussing some design issues to be taken into consideration when developing telemedicine software systems. We considered and reviewed the major conferences and journals in depth, and looked for reports on the telemedicine projects. We provide the reader with a survey of the main projects and systems, from which we derived a taxonomy of features of telemedicine systems for developing countries. We also propose and discuss some classification criteria for design issues, based on the lessons learned in this research area. We highlight some challenges and recommendations to be considered when designing a telemedicine system for developing countries.

  15. Tkinter GUI application development

    CERN Document Server

    Chaudhary, Bhaskar

    2013-01-01

    Practical, real-world example projects. Start with the topics that grab your attention or work through each project in sequence.If you have just started with GUI programming, this book is ideal for you. This book is also great if you are an experienced software developer, scientist, researcher, engineer, student, or hobbyist.

  16. Recent developments in airborne gamma ray surveying

    International Nuclear Information System (INIS)

    Grasty, Robert L.

    1999-01-01

    Standardized procedures have been developed for converting airborne gamma ray measurements to ground concentrations of potassium, uranium and thorium. These procedures make use of an airborne calibration range whose ground concentrations should be measured with a calibrated portable spectrometer rather than by taking geochemical samples. Airborne sensitivities and height attenuation coefficients are normally determined from flights over the calibration range but may not be applicable in mountainous areas. Mathematical techniques have been now developed to reduce statistical noise in the airborne measurements by utilizing up to 256 channels of spectral information. (author)

  17. Report on achievement in developing an ultra low loss power element technology. Survey on practical application of the next generation power semiconductor devices; 1998 nendo choteisonshitsu denryoku soshi gijutsu kaihatsu seika hokokusho. Jisedai power handotai device jitsuyoka chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Trends were surveyed for development of an ultra low loss power element. Performance improvement has been progressed on power semiconductor elements by using Si as the raw material, but loss reduction has come close to the physical limit. SiC is expected of possibility to go beyond this limit. SiC is so very excellent that its band gap is two to three times greater, insulation breakdown electric field is 7.5 times higher, temperature to become a true semiconductor is three to four times higher than those of Si. The wide gap can reduce high temperature leaking current in p-n junctions, and the increased authenticity temperature can increase the upper limit for operation temperature. The insulation breakdown strength being higher by one digit can reduce the drift layer thickness, and is expected to dramatically reduce the loss. The problem is that high quality crystals have not been obtained to date. One of the promising application fields is electric vehicle. The device currently using the power element in the largest scale is used in frequency converting stations to link the 50-Hz power network in the eastern part of Japan to the 60-Hz network in the western part of Japan. Surveys were carried out on the Sakuma frequency converting station and the New Shinano substation. (NEDO)

  18. Trends in Mobile Application Development

    Science.gov (United States)

    Holzer, Adrian; Ondrus, Jan

    Major software companies, such as Apple and Google, are disturbing the relatively safe and established actors of the mobile application business. These newcomers have caused significant structural changes by imposing and enforcing their own rules for the future of mobile application development. The implications of these changes do not only concern the mobile network operators and mobile phone manufacturers. This changed environment also brings additional opportunities and constraints for current mobile application developers. Therefore, developers need to assess what their options are and how they can take advantages of these current trends. In this paper, we take a developer’s perspective in order to explore how the structural changes will influence the mobile application development markets. Moreover, we discuss what aspects developers need to take into account in order to position themselves within the current trends.

  19. Voice application development for Android

    CERN Document Server

    McTear, Michael

    2013-01-01

    This book will give beginners an introduction to building voice-based applications on Android. It will begin by covering the basic concepts and will build up to creating a voice-based personal assistant. By the end of this book, you should be in a position to create your own voice-based applications on Android from scratch in next to no time.Voice Application Development for Android is for all those who are interested in speech technology and for those who, as owners of Android devices, are keen to experiment with developing voice apps for their devices. It will also be useful as a starting po

  20. A Survey of Blue-Noise Sampling and Its Applications

    KAUST Repository

    Yan, Dongming

    2015-05-05

    In this paper, we survey recent approaches to blue-noise sampling and discuss their beneficial applications. We discuss the sampling algorithms that use points as sampling primitives and classify the sampling algorithms based on various aspects, e.g., the sampling domain and the type of algorithm. We demonstrate several well-known applications that can be improved by recent blue-noise sampling techniques, as well as some new applications such as dynamic sampling and blue-noise remeshing.

  1. A Survey of Blue-Noise Sampling and Its Applications

    KAUST Repository

    Yan, Dongming; Guo, Jian-Wei; Wang, Bin; Zhang, Xiao-Peng; Wonka, Peter

    2015-01-01

    In this paper, we survey recent approaches to blue-noise sampling and discuss their beneficial applications. We discuss the sampling algorithms that use points as sampling primitives and classify the sampling algorithms based on various aspects, e.g., the sampling domain and the type of algorithm. We demonstrate several well-known applications that can be improved by recent blue-noise sampling techniques, as well as some new applications such as dynamic sampling and blue-noise remeshing.

  2. A Survey on Applications of Augmented Reality

    OpenAIRE

    Andrea Sanna; Federico Manuri

    2016-01-01

    The term Augmented Reality (AR) refers to a set of technologies and devices able to enhance and improve human perception, thus bridging the gap between real and virtual space. Physical and artificial objects are mixed together in a hybrid space where the user can move without constraints. This mediated reality is spread in our everyday life: work, study, training, relaxation, time spent traveling are just some of the moments in which you can use AR applications.This paper aims to provide an o...

  3. Identifying Correlates of Young Adults' Weight Behavior: Survey Development

    Science.gov (United States)

    Larson, Nicole; Neumark-Sztainer, Dianne; Story, Mary; van den Berg, Patricia; Hannan, Peter J.

    2011-01-01

    Objective: To describe the development and psychometric properties of survey measures relevant to eating, physical activity, and weight-related behaviors among young adults. Methods: Focus groups and reliability testing guided the development of the Project EAT-III survey. The final survey was completed by 2287 young adults. Results: The…

  4. APPLICATION OF DSM IN OBSTACLE CLEARANCE SURVEYING OF AERODROME

    Directory of Open Access Journals (Sweden)

    X. Qiao

    2016-06-01

    Full Text Available Compared to the wide use of digital elevation model (DEM, digital surface model (DSM receives less attention because that it is composed by not only terrain surface, but also vegetations and man-made objects which are usually regarded as useless information. Nevertheless, these objects are useful for the identification of obstacles around an aerodrome. The primary objective of the study was to determine the applicability of DSM in obstacle clearance surveying of aerodrome. According to the requirements of obstacle clearance surveying at QT airport, aerial and satellite imagery were used to generate DSM, by means of photogrammetry, which was spatially analyzed with the hypothetical 3D obstacle limitation surfaces (OLS to identify the potential obstacles. Field surveying was then carried out to retrieve the accurate horizontal position and height of the obstacles. The results proved that the application of DSM could make considerable improvement in the efficiency of obstacle clearance surveying of aerodrome.

  5. Application development with Qt creator

    CERN Document Server

    Rischpater, Ray

    2014-01-01

    This book is great for developers who are new to Qt and Qt Creator and who are interested in harnessing the power of Qt for cross-platform development. If you have basic experience programming in C++, you have what it takes to create engaging cross-platform applications using Qt and Qt Creator!

  6. Advanced express web application development

    CERN Document Server

    Keig, Andrew

    2013-01-01

    A practical book, guiding the reader through the development of a single page application using a feature-driven approach.If you are an experienced JavaScript developer who wants to build highly scalable, real-world applications using Express, this book is ideal for you. This book is an advanced title and assumes that the reader has some experience with node, Javascript MVC web development frameworks, and has heard of Express before, or is familiar with it. You should also have a basic understanding of Redis and MongoDB. This book is not a tutorial on Node, but aims to explore some of the more

  7. Application development with Qt creator

    CERN Document Server

    Rischpater, Ray

    2013-01-01

    Written in a concise and easy-to-follow approach, this book will guide you to develop your first application with Qt with illustrated examples and screenshots.If you are a developer who is new to Qt and Qt Creator and is interested in harnessing the power of Qt for cross-platform development, this book is great for you. If you have basic experience programming in C++, you have what it takes to create great cross-platform applications using Qt and Qt Creator!

  8. CoffeeScript application development

    CERN Document Server

    Young, Ian

    2013-01-01

    CoffeeScript Application Development is a practical, hands-on guide with step-by-step instructions. Follow the smooth and easy tutorial approach, covering examples that build in complexity. By the final chapter you'll be wondering why you didn't try CoffeeScript sooner.If you are a JavaScript developer who wants to save time and add power to your code, then this is the book that will help you do it. With minimal fuss you will learn a whole new language which will reduce your application development time from weeks to days.

  9. Application of microearthquake surveys in nuclear power plant siting

    International Nuclear Information System (INIS)

    1985-06-01

    Earthquakes of magnitude less than 3 are generally referred to as microearthquakes. After an overview of the use of microearthquake survey in decisions related to the siting of nuclear power plants, the main aspects of a microearthquake survey network are discussed. The use of microearthquake surveys in investigating problems related to near-field (floating) earthquakes is also discussed. The discussion is centered on the practical application of such a survey leading from objectives and limitations over to planning, instrumentation, operation, maintenance, processing of the data, and interpretation and reporting of the results. An appendix entitled Earthquake Magnitude gives useful background information for definitions of different types of magnitude and their calculation using the records from microearthquake surveys

  10. Emerging Cognitive Radio Applications: A Survey

    NARCIS (Netherlands)

    Wang, J.; Ghosh, M.; Challapali, K.

    2011-01-01

    Recent developments in the spectrum policy and regulatory domains allow more flexible and efficient use of spectrum, notably the releaseof National Broadband Plan, the publication of final rules for TV white spaces, and the ongoing proceeding for secondary use of the 2360–2400 MHz band for Medical

  11. Professional Android 4 Application Development

    CERN Document Server

    Meier, Reto

    2012-01-01

    Developers, build mobile Android apps using Android 4 The fast-growing popularity of Android smartphones and tablets creates a huge opportunities for developers. If you're an experienced developer, you can start creating robust mobile Android apps right away with this professional guide to Android 4 application development. Written by one of Google's lead Android developer advocates, this practical book walks you through a series of hands-on projects that illustrate the features of the Android SDK. That includes all the new APIs introduced in Android 3 and 4, including building for tablets, u

  12. Fiscal 1998 New Sunshine Program achievement report. Development for practical application of photovoltaic system - Research and development of photovoltaic system evaluation technology (Research, development, and survey of crystalline solar cell evaluation system); 1998 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyoko hatsuden system hyoka gijutsu no kenkyu kaihatsu (kesshokei taiyo denchi hyoka system no kenkyu kaihatsu chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In the basic study of ultrahigh-efficiency cells, the technology of ribbon crystal growing is again attracting attention for shortage of Si material supply. The new technology and problems to solve for cost reduction for it are discussed. Concerning the bulk type crystalline Si which is a core material, recent trends are mentioned involving studies of basic substrate properties such as the photoabsorption coefficient and crystal defects for achieving higher efficiency, development of gettering and surface passivation technologies, enhancement of processing speeds, radiation concentration behavior, etc. Newly obtained findings about photodegradation are mentioned, and some remedial measures are described. Recent reports on the application of porous Si to solar cells are compiled. In connection with the development of low-cost quantity-production process technologies, a remarkable progress recently marked by polycrystalline Si solar cells is described. Furthermore, it is stated that new process technologies will be required in the fields of material refining, substrate manufacturing, and cell fabrication. A proposition is presented aiming at developing cell modules compatible with application systems and practicalizing modules that may be integrated with roofing materials. Reference is also made to surveys overseas. (NEDO)

  13. Survey of Processing Methods for High Strength High Conductivity Wires for High Field Magnet Applications

    Energy Technology Data Exchange (ETDEWEB)

    Han, K.; Embury, J.D.

    1998-10-01

    This paper will deal with the basic concepts of attaining combination of high strength and high conductivity in pure materials, in-situ composites and macrocomposites. It will survey current attainments, and outline where some future developments may lie in developing wire products that are close to the theoretical strength of future magnet applications.

  14. Survey of Processing Methods for High Strength High Conductivity Wires for High Field Magnet Applications

    International Nuclear Information System (INIS)

    Han, K.; Embury, J.D.

    1998-01-01

    This paper will deal with the basic concepts of attaining combination of high strength and high conductivity in pure materials, in-situ composites and macrocomposites. It will survey current attainments, and outline where some future developments may lie in developing wire products that are close to the theoretical strength of future magnet applications

  15. Development and application of microsieves

    NARCIS (Netherlands)

    Kuiper, S.

    2000-01-01

    Microsieves are a fairly recent (1994) innovation in membrane-filtration technology, especially at the start of the Ph.D. work (1996) that led to this thesis. Further development and application of such a recent innovation demand a high degree of pioneering. The field of subjects and possibilities

  16. Survey of EPA facilities for solar thermal energy applications

    Science.gov (United States)

    Nelson, E. V.; Overly, P. T.; Bell, D. M.

    1980-01-01

    A study was done to assess the feasibility of applying solar thermal energy systems to EPA facilities. A survey was conducted to determine those EPA facilities where solar energy could best be used. These systems were optimized for each specific application and the system/facility combinations were ranked on the basis of greatest cost effectiveness.

  17. Literature survey of heat transfer enhancement techniques in refrigeration applications

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, M.K.; Shome, B. [Rensselaer Polytechnic Inst., Troy, NY (United States). Dept. of Mechanical Engineering, Aeronautical Engineering and Mechanics

    1994-05-01

    A survey has been performed of the technical and patent literature on enhanced heat transfer of refrigerants in pool boiling, forced convection evaporation, and condensation. Extensive bibliographies of the technical literature and patents are given. Many passive and active techniques were examined for pure refrigerants, refrigerant-oil mixtures, and refrigerant mixtures. The citations were categorized according to enhancement technique, heat transfer mode, and tube or shell side focus. The effects of the enhancement techniques relative to smooth and/or pure refrigerants were illustrated through the discussion of selected papers. Patented enhancement techniques also are discussed. Enhanced heat transfer has demonstrated significant improvements in performance in many refrigerant applications. However, refrigerant mixtures and refrigerant-oil mixtures have not been studied extensively; no research has been performed with enhanced refrigerant mixtures with oil. Most studies have been of the parametric type; there has been inadequate examination of the fundamental processes governing enhanced refrigerant heat transfer, but some modeling is being done and correlations developed. It is clear that an enhancement technique must be optimized for the refrigerant and operating condition. Fundamental processes governing the heat transfer must be examined if models for enhancement techniques are to be developed; these models could provide the method to optimize a surface. Refrigerant mixtures, with and without oil present, must be studied with enhancement devices; there is too little known to be able to estimate the effects of mixtures (particularly NARMs) with enhanced heat transfer. Other conclusions and recommendations are offered.

  18. Social Capital: Its Constructs and Survey Development

    Science.gov (United States)

    Enfield, Richard P.; Nathaniel, Keith C.

    2013-01-01

    This article reports on experiences and methods of adapting a valid adult social capital assessment to youth audiences in order to measure social capital and sense of place. The authors outline the process of adapting, revising, prepiloting, piloting, and administering a youth survey exploring young people's sense of community, involvement in the…

  19. National Survey Report of Photovoltaic Power Applications in France 2016

    International Nuclear Information System (INIS)

    Kaaijk, Paul; Mehl, Celine; Carrere, Tristan

    2017-06-01

    The objective of Task 1 of the IEA Photovoltaic Power Systems Program is to promote and facilitate the exchange and dissemination of information on the technical, economic, environmental and social aspects of PV power systems. Task 1 activities support the broader PVPS objectives: to contribute to cost reduction of PV power applications, to increase awareness of the potential and value of PV power systems, to foster the removal of both technical and non-technical barriers and to enhance technology co-operation. An important deliverable of Task 1 is the annual 'Trends in photovoltaic applications' report. In parallel, National Survey Reports are produced annually by each Task 1 participant. This document is France National Survey Report for the year 2016. Information from this document will be used as input to IEA's annual Trends in photovoltaic applications report

  20. Fiscal 1999 research and development of technologies for practical application of photovoltaic power generation systems. Development of ultrahigh-efficiency crystalline compound solar cell manufacturing technology (Survey of peripheral element technologies - Survey of novel voltaic cell structure solar cell development); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Chokokoritsu kessho kagobutsu taiyo denchi no seizo gijutsu kaihatsu (shuhen yoso gijutsu ni kansuru chosa kenkyu - shinhatsuden soshi kozo taiyo denchi kaitaku no chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The present state and trend are surveyed of organic ferroelectric thin films, new carbon materials, fullerene compounds, and thermophotovoltaic (TPV) power. In the study of organic ferroelectric thin-film solar cells, the effort still remains at the basic stage, with the conversion rate as low as 3% in Europe and 2% in Japan. The progress of basic studies, however, is worth attention. It is deemed that 15% is the photoconversion rate to be currently expected from new carbon material solar cells. Fullerene compounds include some semiconductors whose bandgap values may be controlled across a 0.75-1.95eV range, and they may find their place in thin-film solar cells. However, their physical properties are not fully known, and their development into devices such as solar cells is scarcely reported. The research and development of TPV in the U.S. is led by NASA (National Aeronautics and Space Administration) and NREL (National Renewable Energy Laboratory), with their efforts concentrated on the development of portable power sources utilizing combustion heat. In Europe, TPV application to small-scale residential cogeneration systems is under study. (NEDO)

  1. Capacity Building for Institutional Development in Surveying and Land Management

    DEFF Research Database (Denmark)

    Enemark, Stig

    2006-01-01

    for developing the basic capacity in terms of educational programs and professional organizations; and 3) Global development through cooperation with other international NGO´s such as the UN agencies, the World Bank and sister organizations in surveying. FIG, this way, plays a strong role, in improving...... for institutional development within surveying and land management. Finally the paper discusses the role of FIG in this regard. Three areas are identified: 1) Professional development through providing a global forum for exchange of experiences and new developments; 2) Institutional development through support...... the capacity in surveying and land management at a global scale....

  2. Artificial intelligence applications in space and SDI: A survey

    Science.gov (United States)

    Fiala, Harvey E.

    1988-01-01

    The purpose of this paper is to survey existing and planned Artificial Intelligence (AI) applications to show that they are sufficiently advanced for 32 percent of all space applications and SDI (Space Defense Initiative) software to be AI-based software. To best define the needs that AI can fill in space and SDI programs, this paper enumerates primary areas of research and lists generic application areas. Current and planned NASA and military space projects in AI will be reviewed. This review will be largely in the selected area of expert systems. Finally, direct applications of AI to SDI will be treated. The conclusion covers the importance of AI to space and SDI applications, and conversely, their importance to AI.

  3. ADASAGE, ADA Application Development System

    International Nuclear Information System (INIS)

    Taylor, M.; Russell, K.; Stewart, H.

    2001-01-01

    1 - Description of program or function: ADASAGE is an application development system designed to facilitate rapid and professional construction of applications written in Ada on microcomputers. ADASAGE applications may vary in size from small to large multi-program systems. ADASAGE consists of a collection of re-usable libraries for database management and form and report processing utilities having the following capabilities: basic universal type and function definitions; sequential file input/output; terminal and file input/output; DOS system command execution; data movement and fill; string manipulation; math libraries; bit manipulation; a relational database utility; data validation; menu form and window procedures; report generation; sort/merge, time, and date functions; sound production; editing; and index rebuilding. Each of the capabilities is integrated to allow the development of an efficient system. As an application is designed and developed, the desired ADASAGE capabilities are chosen and included along with any requirements unique to that application. 2 - Method of solution: All ADASAGE applications which use the database, forms (windows, menus, etc.), or reporting functions require a file with a suffix of .DFL. This file contains the database schema, the various forms and windows, and report definitions. The THOR editor is used to create and maintain the .DFL file. This editor operates on a file with the suffix .SRC and creates and edits schemes, forms, and report formats and compile the .SRC file into the .DFL file used by the application. The application will have unique requirements not satisfied by the selected utilities of ADASAGE. The code for these along with the code necessary to import and use the selected ADASAGE utilities constitutes the p rogrammed application . The completed application system will contain the .DFL file produced by the THOR editor, the required ADASAGE utilities, and the programmed application. During the course of

  4. Drum inspection robots: Application development

    International Nuclear Information System (INIS)

    Hazen, F.B.; Warner, R.D.

    1996-01-01

    Throughout the Department of Energy (DOE), drums containing mixed and low level stored waste are inspected, as mandated by the Resource Conservation and Recovery Act (RCRA) and other regulations. The inspections are intended to prevent leaks by finding corrosion long before the drums are breached. The DOE Office of Science and Technology (OST) has sponsored efforts towards the development of robotic drum inspectors. This emerging application for mobile and remote sensing has broad applicability for DOE and commercial waste storage areas. Three full scale robot prototypes have been under development, and another project has prototyped a novel technique to analyze robotically collected drum images. In general, the robots consist of a mobile, self-navigating base vehicle, outfitted with sensor packages so that rust and other corrosion cues can be automatically identified. They promise the potential to lower radiation dose and operator effort required, while improving diligence, consistency, and documentation

  5. Fiscal 1999 research and development of technologies for practical application of photovoltaic power generation systems. Research and development of solar cell evaluation system (Survey of research and development of solar cell evaluation system); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyo denchi hyoka system no kenkyu kaihatsu (taiyo denchi hyoka system no kenkyu kaihatsu chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The fiscal 1999 results of survey and research conducted for the establishment of solar cell performance evaluation and reliability evaluation methods are reported. In the development of a super high fidelity (broad spectrum) solar simulator for cell evaluation, a prototype was tested for performance evaluation, and initially set values were achieved. In the development of a large-area module evaluation technology, the radiation area was increased to be 1.0m times 1.0m large. Outdoor exposure tests continued at 5 sites in Japan, 3 sites in Australia, and 1 site in Oman, and analyses and databasing were carried out for the outputs of various types of solar cell modules. As for the problem of coloring of fillers which are module constituents, coloring in the U.S. was attributed to high temperature and intensive insolation, and in Austria to an oxidation inhibitor. In the development of a photo-accelerated degradation testing method for Si-based solar cells, application of the cycled illumination test was found feasible. In this test method, an amorphous silicon solar cell retains 70% of the initial Pmax value even after the passage of a period equivalent to 30 years. (NEDO)

  6. Solar photovoltaics for development applications

    Energy Technology Data Exchange (ETDEWEB)

    Shepperd, L.W. [Florida Solar Energy Center, Cape Canaveral, FL (United States); Richards, E.H. [Sandia National Labs., Albuquerque, NM (United States)

    1993-08-01

    This document introduces photovoltaic technology to individuals and groups specializing in development activities. Examples of actual installations illustrate the many services supplied by photovoltaic systems in development applications, including water pumping, lighting, health care, refrigeration, communications, and a variety of productive uses. The various aspects of the technology are explored to help potential users evaluate whether photovoltaics can assist them in achieving their organizational goals. Basic system design, financing techniques, and the importance of infrastructure are included, along with additional sources of information and major US photovoltaic system suppliers.

  7. Empirical Validation and Application of the Computing Attitudes Survey

    Science.gov (United States)

    Dorn, Brian; Elliott Tew, Allison

    2015-01-01

    Student attitudes play an important role in shaping learning experiences. However, few validated instruments exist for measuring student attitude development in a discipline-specific way. In this paper, we present the design, development, and validation of the computing attitudes survey (CAS). The CAS is an extension of the Colorado Learning…

  8. Development of aerial gamma radiation survey system III

    International Nuclear Information System (INIS)

    Nagaoka, Toshi; Sakamoto, Ryuichi; Saito, Kimiaki; Tsutsumi, Masahiro; Moriuchi, Shigeru; Miyasaka, Satoshi.

    1985-01-01

    An aerial gamma-ray survey system using a helicopter has been developed since 1980 in order to perform quick gamma-ray survey covering a wide area. To form a line in the chain of the development, a series of flight measurements were conducted in Watarase reservoir, Tochigi prefecture, in which artificial gamma-ray fields were realized using 60 Co (100 and 400 mCi) and 137 Cs (100 and 300 mCi) point sources located on the ground. For the purpose of obtaining gamma-ray pulse height spectra in the field, 6 sets of NaI(Tl) scientillation detectors were prepared. These sets of detectors consist of ones for evaluation with high accuracy as the standard, for intercomparison with other authors' results, and for practical use. Two sets of them were boarded for each flight considering the exposure rate level and detector's sensitivity. The flight measurements were performed in a space of 20 m to 500 m in altitude, and 0 m to 500 m in horizontal distance from the source. The experimental results of the spatial gamma-ray distribution for each gamma-ray field satisfactorily agreed with calculational results by Monte Carlo method. Throughout this experiment, characteristics of this survey system and detectors were clarified, and versatile data processing and analysis code was completed. Also, a method for subtraction of background exposure rate in a field including artificial radiation component was discussed using energy band information, and the coefficients for this method were determined. These data obtained are expected to be used as widely applicable data not only for the interpretation of measured value, but also for analysis of environmental gamma-ray field. (author)

  9. DEVELOPING APPLICATIONS FOR ELECTRONIC BUSINESS

    Directory of Open Access Journals (Sweden)

    Georgeta Șoavă

    2012-12-01

    Full Text Available We are in the early 3rd millennium as companies face the need to exploit technology changing computer environments, in order to improve customer satisfaction and reduce costs. Thus, the development of e-business, the efficient use of new information technologies in business, by developing an alternative sales channel with relatively low costs, it manages to establish relationships with incomparably greater number of customers, to traditional approaches. Starting from these general considerations, we conducted this work we divided it into four parts. In the first part we present general context in which companies can achieve needs using new technologies, then we reviewed the basic elements in developing e-business type applications presenting their main benefits. Next, I approached refining models for e-business software development and use of distributed architectures for electronic commerce, concluding with a set of conclusions.

  10. National Survey Report of PV Power Applications in France 2014

    International Nuclear Information System (INIS)

    Kaaijk, Paul; Durand, Yvonnick

    2015-06-01

    The objective of Task 1 of the IEA Photovoltaic Power Systems Program is to promote and facilitate the exchange and dissemination of information on the technical, economic, environmental and social aspects of PV power systems. Task 1 activities support the broader PVPS objectives: to contribute to cost reduction of PV power applications, to increase awareness of the potential and value of PV power systems, to foster the removal of both technical and non-technical barriers and to enhance technology co-operation. An important deliverable of Task 1 is the annual Trends in photovoltaic applications report. In parallel, National Survey Reports are produced annually by each Task 1 participant. The PVPS web site www.iea-pvps.org also plays an important role in disseminating information arising from the program, including national information. This document is the French National Survey Report on photovoltaics for the year 2014

  11. National Survey Report of Photovoltaic Power Applications in France 2015

    International Nuclear Information System (INIS)

    Kaaijk, Paul; Durand, Yvonnick

    2016-06-01

    The objective of Task 1 of the IEA Photovoltaic Power Systems Program is to promote and facilitate the exchange and dissemination of information on the technical, economic, environmental and social aspects of PV power systems. Task 1 activities support the broader PVPS objectives: to contribute to cost reduction of PV power applications, to increase awareness of the potential and value of PV power systems, to foster the removal of both technical and non-technical barriers and to enhance technology co-operation. An important deliverable of Task 1 is the annual report Trends in Photovoltaic Applications. In parallel, National Survey Reports are produced annually by each Task 1 participant. The PVPS web site www.iea-pvps.org also plays an important role in disseminating information arising from the program, including national information. This document is the French National Survey Report on photovoltaics for the year 2015

  12. Cloud computing for energy management in smart grid - an application survey

    International Nuclear Information System (INIS)

    Naveen, P; Ing, Wong Kiing; Danquah, Michael Kobina; Sidhu, Amandeep S; Abu-Siada, Ahmed

    2016-01-01

    The smart grid is the emerging energy system wherein the application of information technology, tools and techniques that make the grid run more efficiently. It possesses demand response capacity to help balance electrical consumption with supply. The challenges and opportunities of emerging and future smart grids can be addressed by cloud computing. To focus on these requirements, we provide an in-depth survey on different cloud computing applications for energy management in the smart grid architecture. In this survey, we present an outline of the current state of research on smart grid development. We also propose a model of cloud based economic power dispatch for smart grid. (paper)

  13. Application of computers in a Radiological Survey Program

    International Nuclear Information System (INIS)

    Berven, B.A.; Blair, M.S.; Doane, R.W.; Little, C.A.; Perdue, P.T.

    1984-01-01

    A brief description of some of the applications of computers in a radiological survey program is presented. It has been our experience that computers and computer software have allowed our staff personnel to more productively use their time by using computers to perform the mechanical acquisition, analyses, and storage of data. It is hoped that other organizations may similarly profit from this experience. This effort will ultimately minimize errors and reduce program costs

  14. Autoionization: recent developments and applications

    International Nuclear Information System (INIS)

    Temkin, A.

    1985-01-01

    This volume reviews significant advances in calculational techniques and also includes a comprehensive treatment of important new applications of autoionization in solar spectral diagnostics. Chapters include: theory and calculation of resonances, autoionization of two-electron atoms and ions, extension of the Feshbach projection operator formalism to many-electron atomic targets, the hole-projection method for calculating Feshbach resonances and inner-shell vacancies, and complex rotation and applications to atomic and molecular resonances. The concluding chapter deals with the diagnostics of solar and astrophysical plasmas dependent on autoionization phenomena. It is a volume designed to be a useful source of information for atomic, molecular, and chemical physicists, astrophysicists, and other space scientists and those in related fields interested in recent developments in ionization

  15. Geomathematics theoretical foundations, applications and future developments

    CERN Document Server

    Agterberg, Frits

    2014-01-01

    This book provides a wealth of geomathematical case history studies performed by the author during his career at the Ministry of Natural Resources Canada, Geological Survey of Canada (NRCan-GSC). Several of the techniques newly developed by the author and colleagues that are described in this book have become widely adopted, not only for further research by geomathematical colleagues, but by government organizations and industry worldwide. These include Weights-of-Evidence modelling, mineral resource estimation technology, trend surface analysis, automatic stratigraphic correlation and nonlinear geochemical exploration methods. The author has developed maximum likelihood methodology and spline-fitting techniques for the construction of the international numerical geologic timescale. He has introduced the application of new theory of fractals and multifractals in the geostatistical evaluation of regional mineral resources and ore reserves and to study the spatial distribution of metals in rocks. The book also ...

  16. The Status of Development of Electromagnetic Pumps for Space Application

    International Nuclear Information System (INIS)

    Kwak, J. S.; Kim, K. H.; Jeong, J. S.; Kim, Hee Reyoung

    2013-01-01

    Korea lunched this research as a part of the small nuclear power generation technology development for space. In this study, investigated are the basic principle and types of electromagnetic pump and the trend of electromagnetic pump technology development in foreign nations. The survey and analysis give the understanding of the suitability and prospect of electromagnetic pumps as space application technology in Korea. The analysis on the status of the development of electromagnetic pumps was carried out for the application to space environment. It was found that USA was approaching the research and development of electromagnetic pumps for space application. Most electromagnetic pumps surveyed have the efficiency between 35% and 50% where that of AC conduction pump is less than 6%. Further study was thought to have to be given for the mechanical and material characteristics, and the applicability of electromagnetic pumps for space nuclear reactor

  17. Facebook Application Development For Dummies

    CERN Document Server

    Stay, Jesse

    2011-01-01

    A fun and easy guide to creating the next great Facebook app! Want to build the next runaway Facebook app like Farmville or Mafia Wars? Interested in leveraging Facebook app development as part of a marketing strategy? Whether you want to build your own Facebook app from scratch, extend an existing Facebook app, or create a game, this book gets you up and running in no time. Master the Facebook toolkit, get acquainted with the Facebook Markup and Query languages, navigate the Facebook API-even learn how to make money with your new app!Shows you how to build the next great Facebook application

  18. Developing survey grids to substantiate freedom from exotic pests

    Science.gov (United States)

    John W. Coulston; Frank H. Koch; William D. Smith

    2009-01-01

    Systematic, hierarchical intensification of the Environmental Monitoring and Assessment Program hexagon for North America yields a simple procedure for developing national-scale survey grids. In this article, we describe the steps to create a national-scale survey grid using a risk map as the starting point. We illustrate the steps using an exotic pest example in which...

  19. Food aid to developing countries: a survey

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, S J; Singer, H W

    1979-03-01

    Food air currently constitutes nearly 15% of official development assistance and hence has considerable potential as a stimulant to growth in less-developed countries (LDCs). This paper reviews the evidence on the impact of food aid on growth and its associated factors. While recognizing that the use of food aid is influenced by a constellation of interests in recipient and donor countries, it identifies a set of guiding principles for maximizing the effectiveness of food aid. These include the need for food (relative to other development needs), its level of substitutability with commercial imports, its incorporation in a poverty-oriented development plan, its guaranteed availability and its complementarity with financial aid. Current food air programs recognize the relevance of some of these principles - e.g. the criteria of necessity - but ignore others - notably the need to situate food aid in a comprehensive plan for improving patterns of income distribution in LDCs. 203 notes, 203 references.

  20. Applications of Calendar Instruments in Social Surveys: a review

    NARCIS (Netherlands)

    Glasner, T.J.; Vaart, van der W.

    2009-01-01

    Retrospective reports in survey interviews and questionnaires are subject to many types of recall error, which affect completeness, consistency, and dating accuracy. Concerns about this problem have led to the development of so-called calendar instruments, or timeline techniques. These aided recall

  1. Lot quality assurance sampling techniques in health surveys in developing countries: advantages and current constraints.

    Science.gov (United States)

    Lanata, C F; Black, R E

    1991-01-01

    Traditional survey methods, which are generally costly and time-consuming, usually provide information at the regional or national level only. The utilization of lot quality assurance sampling (LQAS) methodology, developed in industry for quality control, makes it possible to use small sample sizes when conducting surveys in small geographical or population-based areas (lots). This article describes the practical use of LQAS for conducting health surveys to monitor health programmes in developing countries. Following a brief description of the method, the article explains how to build a sample frame and conduct the sampling to apply LQAS under field conditions. A detailed description of the procedure for selecting a sampling unit to monitor the health programme and a sample size is given. The sampling schemes utilizing LQAS applicable to health surveys, such as simple- and double-sampling schemes, are discussed. The interpretation of the survey results and the planning of subsequent rounds of LQAS surveys are also discussed. When describing the applicability of LQAS in health surveys in developing countries, the article considers current limitations for its use by health planners in charge of health programmes, and suggests ways to overcome these limitations through future research. It is hoped that with increasing attention being given to industrial sampling plans in general, and LQAS in particular, their utilization to monitor health programmes will provide health planners in developing countries with powerful techniques to help them achieve their health programme targets.

  2. Alternative methods for developing external travel survey data.

    Science.gov (United States)

    2010-10-01

    The Texas Department of Transportation (TxDOT) has a comprehensive on-going travel survey : program that supports the travel demand models being developed for transportation planning efforts in urban : areas throughout Texas. One component of the sur...

  3. Development of GPS survey data management protocols/policy.

    Science.gov (United States)

    2010-08-01

    This project developed a statewide policy and criteria for collecting, analyzing, and managing global position system (GPS) survey data. The research project determined the needs of the Department in adopting the GPS real time kinetic (GPS RTK) stake...

  4. Augmented reality for Android application development

    CERN Document Server

    Grubert, Jens

    2013-01-01

    A step-by-step tutorial-based guide aimed at giving you hands-on practical experience to develop AR applications for Android.Augmented Reality for Android Application Development is for Android mobile application developers who are familiar with Android Development Tools and deployment, JMonkeyEngine, and the Vuforia SDK.

  5. Development of superconductor application technology

    Energy Technology Data Exchange (ETDEWEB)

    Hong, G W; Kim, C J; Lee, H G; Lee, H J; Kim, K B; Won, D Y; Jang, K I; Kwon, S C; Kim, W J; Ji, Y A; Yang, S W; Kim, W K; Park, S D; Lee, M H; Lee, D M; Park, H W; Yu, J K; Lee, I S; Kim, J J; Choi, H S; Chu, Y; Kim, Y S; Kim, D H

    1997-09-01

    Fabrication of high Tc bulk superconductor and its application, fabrication of superconducting wire for electric power device and analysis for cryogenic system were carried out for developing superconductor application technologies for electric power system. High quality YBaCuO bulk superconductor was fabricated by controlling initial powder preparation process and prototype flywheel energy storage device was designed basically. The superconducting levitation force measuring device was made to examine the property of prepared superconductor specimen. Systematic studies onthe method of starting powder preparation, mechanical fabrication process, heat treatment condition and analysis of plastic deformation were carried out to increase the stability and reproducibility of superconducting wire. A starting power with good reactivity and fine particle size was obtained by mechanical grinding, control of phase assemblage, and emulsion drying method. Ag/BSCCO tape with good cross sectional shape and Jc of 20,000 A/cm{sup 2} was fabricated by applying CIP packing procedure. Multifilamentary wire with Jc of 10,000 A/cm{sup 2} was fabricated by rolling method using square billet as starting shape. The joining of the multifilamentary wire was done by etching and pressing process and showed 50% of joining efficiency. Analysis on the heat loss in cryostat for high Tc superconducting device was carried out for optimum design of the future cryogenic system. (author). 66 refs., 104 figs.

  6. Development of superconductor application technology

    International Nuclear Information System (INIS)

    Hong, G. W.; Kim, C. J.; Lee, H. G.; Lee, H. J.; Kim, K. B.; Won, D. Y.; Jang, K. I.; Kwon, S. C.; Kim, W. J.; Ji, Y. A.; Yang, S. W.; Kim, W. K.; Park, S. D.; Lee, M. H.; Lee, D. M.; Park, H. W.; Yu, J. K.; Lee, I. S.; Kim, J. J.; Choi, H. S.; Chu, Y.; Kim, Y. S.; Kim, D. H.

    1997-09-01

    Fabrication of high Tc bulk superconductor and its application, fabrication of superconducting wire for electric power device and analysis for cryogenic system were carried out for developing superconductor application technologies for electric power system. High quality YBaCuO bulk superconductor was fabricated by controlling initial powder preparation process and prototype flywheel energy storage device was designed basically. The superconducting levitation force measuring device was made to examine the property of prepared superconductor specimen. Systematic studies onthe method of starting powder preparation, mechanical fabrication process, heat treatment condition and analysis of plastic deformation were carried out to increase the stability and reproducibility of superconducting wire. A starting power with good reactivity and fine particle size was obtained by mechanical grinding, control of phase assemblage, and emulsion drying method. Ag/BSCCO tape with good cross sectional shape and Jc of 20,000 A/cm 2 was fabricated by applying CIP packing procedure. Multifilamentary wire with Jc of 10,000 A/cm 2 was fabricated by rolling method using square billet as starting shape. The joining of the multifilamentary wire was done by etching and pressing process and showed 50% of joining efficiency. Analysis on the heat loss in cryostat for high Tc superconducting device was carried out for optimum design of the future cryogenic system. (author). 66 refs., 104 figs

  7. A case for a vegetation survey in a developing country based on Zimbabwe

    Directory of Open Access Journals (Sweden)

    T. Müller

    1983-11-01

    Full Text Available The need for a vegetation survey in Zimbabwe, a developing country, is discussed. It is proposed that such a survey should produce a classification which is based on floristic criteria, and in which the vegetation types relate as nearly as possible to homogeneous environmental units. The practical application of such a classification is outlined with reference to the management of natural vegetation resources, land use planning and the preservation of species diversity.

  8. A survey on the modeling and applications of cellular automata theory

    Science.gov (United States)

    Gong, Yimin

    2017-09-01

    The Cellular Automata Theory is a discrete model which is now widely used in scientific researches and simulations. The model is comprised of some cells which changes according to a specific rule over time. This paper provides a survey of the Modeling and Applications of Cellular Automata Theory, which focus on the program realization of Cellular Automata Theory and the application of Cellular Automata in each field, such as road traffic, land use, and cutting machines. Each application is further explained, and several related main models are briefly introduced. This research aims to help decision-makers formulate appropriate development plans.

  9. Development and validation of Neonatal Satisfaction Survey--NSS-13.

    Science.gov (United States)

    Hagen, Inger H; Vadset, Tove B; Barstad, Johan; Svindseth, Marit F

    2015-06-01

    The purpose of this study was to develop and validate a survey to investigate parents' satisfaction with neonatal wards in a population of parents of children with a gestation age of ≥24 weeks to 3 months after full-term birth. We explored the literature and conducted three focus groups: two with expert health personnel and one with parents. We tested the survey in a parent population (N = 105) and report the different stages in the validation process along with the full survey, the Neonatal Satisfaction Survey - 13 categories (NSS-13). We found 13 subcategories in the Neonatal Satisfaction Survey. The subcategories measure parents' satisfaction with neonatal units based on staff, admission, nurses, anxiety, siblings (parents' perceptions of caring for the siblings of the newborn), information, timeout, doctors, facilities, nutrition, preparation for discharge, trust and visitors. Each subcategory showed acceptable internal consistency. The full version of the Neonatal Satisfaction Survey presents 69 items, and each subcategory contains two to eleven items. The Neonatal Satisfaction Survey seems suitable to measure parents' satisfaction with neonatal units and can be used in full, but it can also measure subcategories. Parents' satisfaction with neonatal units can be used to improve the quality in such wards. We consider this study as the first in a series to validate the NSS-13. The full survey with subcategories is presented in this paper. © 2014 Nordic College of Caring Science.

  10. Surveying wearable human assistive technology for life and safety critical applications: standards, challenges and opportunities.

    Science.gov (United States)

    Alam, Muhammad Mahtab; Ben Hamida, Elyes

    2014-05-23

    In this survey a new application paradigm life and safety for critical operations and missions using wearable Wireless Body Area Networks (WBANs) technology is introduced. This paradigm has a vast scope of applications, including disaster management, worker safety in harsh environments such as roadside and building workers, mobile health monitoring, ambient assisted living and many more. It is often the case that during the critical operations and the target conditions, the existing infrastructure is either absent, damaged or overcrowded. In this context, it is envisioned that WBANs will enable the quick deployment of ad-hoc/on-the-fly communication networks to help save many lives and ensuring people's safety. However, to understand the applications more deeply and their specific characteristics and requirements, this survey presents a comprehensive study on the applications scenarios, their context and specific requirements. It explores details of the key enabling standards, existing state-of-the-art research studies, and projects to understand their limitations before realizing aforementioned applications. Application-specific challenges and issues are discussed comprehensively from various perspectives and future research and development directions are highlighted as an inspiration for new innovative solutions. To conclude, this survey opens up a good opportunity for companies and research centers to investigate old but still new problems, in the realm of wearable technologies, which are increasingly evolving and getting more and more attention recently.

  11. Development and validation of the primary care team dynamics survey.

    Science.gov (United States)

    Song, Hummy; Chien, Alyna T; Fisher, Josephine; Martin, Julia; Peters, Antoinette S; Hacker, Karen; Rosenthal, Meredith B; Singer, Sara J

    2015-06-01

    To develop and validate a survey instrument designed to measure team dynamics in primary care. We studied 1,080 physician and nonphysician health care professionals working at 18 primary care practices participating in a learning collaborative aimed at improving team-based care. We developed a conceptual model and administered a cross-sectional survey addressing team dynamics, and we assessed reliability and discriminant validity of survey factors and the overall survey's goodness-of-fit using structural equation modeling. We administered the survey between September 2012 and March 2013. Overall response rate was 68 percent (732 respondents). Results support a seven-factor model of team dynamics, suggesting that conditions for team effectiveness, shared understanding, and three supportive processes are associated with acting and feeling like a team and, in turn, perceived team effectiveness. This model demonstrated adequate fit (goodness-of-fit index: 0.91), scale reliability (Cronbach's alphas: 0.71-0.91), and discriminant validity (average factor correlations: 0.49). It is possible to measure primary care team dynamics reliably using a 29-item survey. This survey may be used in ambulatory settings to study teamwork and explore the effect of efforts to improve team-based care. Future studies should demonstrate the importance of team dynamics for markers of team effectiveness (e.g., work satisfaction, care quality, clinical outcomes). © Health Research and Educational Trust.

  12. A survey of decontamination processes applicable to DOE nuclear facilities

    Energy Technology Data Exchange (ETDEWEB)

    Chen, L.; Chamberlain, D.B.; Conner, C.; Vandegrift, G.F.

    1997-05-01

    The objective of this survey was to select an appropriate technology for in situ decontamination of equipment interiors as part of the decommissioning of U.S. Department of Energy nuclear facilities. This selection depends on knowledge of existing chemical decontamination methods. This report provides an up-to-date review of chemical decontamination methods. According to available information, aqueous systems are probably the most universally used method for decontaminating and cleaning metal surfaces. We have subdivided the technologies, on the basis of the types of chemical solvents, into acid, alkaline permanganate, highly oxidizing, peroxide, and miscellaneous systems. Two miscellaneous chemical decontamination methods (electrochemical processes and foam and gel systems) are also described. A concise technical description of various processes is given, and the report also outlines technical considerations in the choice of technologies, including decontamination effectiveness, waste handing, fields of application, and the advantages and limitations in application. On the basis of this survey, six processes were identified for further evaluation. 144 refs., 2 tabs.

  13. A survey of decontamination processes applicable to DOE nuclear facilities

    International Nuclear Information System (INIS)

    Chen, L.; Chamberlain, D.B.; Conner, C.; Vandegrift, G.F.

    1997-05-01

    The objective of this survey was to select an appropriate technology for in situ decontamination of equipment interiors as part of the decommissioning of U.S. Department of Energy nuclear facilities. This selection depends on knowledge of existing chemical decontamination methods. This report provides an up-to-date review of chemical decontamination methods. According to available information, aqueous systems are probably the most universally used method for decontaminating and cleaning metal surfaces. We have subdivided the technologies, on the basis of the types of chemical solvents, into acid, alkaline permanganate, highly oxidizing, peroxide, and miscellaneous systems. Two miscellaneous chemical decontamination methods (electrochemical processes and foam and gel systems) are also described. A concise technical description of various processes is given, and the report also outlines technical considerations in the choice of technologies, including decontamination effectiveness, waste handing, fields of application, and the advantages and limitations in application. On the basis of this survey, six processes were identified for further evaluation. 144 refs., 2 tabs

  14. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    As part of the work of the IEA PVPS programme, annual surveys of photovoltaic (PV) power applications and markets are carried out in the participating countries. The objective of the series of annual Trends reports is to present and interpret developments in both the PV systems and components being used in the PV power systems market and the changing applications for these products within that market. These trends are analyzed in the context of the business, policy and non-technical environment in the reporting countries. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to {+-}0 %. Data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. This report presents the results of the 10th international survey. It provides an overview of PV power systems applications, markets and production in the reporting countries and elsewhere at the end of 2004 and analyzes trends in the implementation of PV power systems between 1992 and 2004. (au)

  15. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2009

    International Nuclear Information System (INIS)

    2010-08-01

    As part of the work of the IEA PVPS programme, annual surveys of photovoltaic (PV) power applications and markets are carried out in the reporting countries. The objective of the series of annual Trends reports is to present and interpret developments in both the PV systems and components being used in the PV power systems market and the changing applications for these products within that market. These trends are analyzed in the context of the business, policy and non-technical environment in the reporting countries. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to ±10 %. Accuracy of data on production levels and system prices varies depending on the willingness of the relevant national PV industry to provide data for the survey. This report presents the results of the 15th international survey. It provides an overview of PV power systems applications, markets and production in the reporting countries and elsewhere at the end of 2009 and analyzes trends in the implementation of PV power systems between 1992 and 2009.

  16. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-15

    As part of the Photovoltaic Power Systems Programme, annual surveys of PV power applications and markets in the 20 participating countries are carried out. The objective of the survey reports is to present and interpret trends in both PV systems and components being used in the PV power systems market, as well as changing applications within that market, in the context of business situations, policies and relevant non-technical factors in the reporting countries. The survey report is not intended to serve as an introduction to PV, nor as a policy document. It is prepared to assist those responsible for developing the business strategies of PV companies and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. This report presents the results of the fifth International Survey. It provides an overview of PV power systems applications and markets in the reporting countries at the end of 1999 and analyses trends in the implementation of PV power systems between 1992 and 1999. (author)

  17. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 1999

    International Nuclear Information System (INIS)

    2000-09-01

    As part of the Photovoltaic Power Systems Programme, annual surveys of PV power applications and markets in the 20 participating countries are carried out. The objective of the survey reports is to present and interpret trends in both PV systems and components being used in the PV power systems market, as well as changing applications within that market, in the context of business situations, policies and relevant non-technical factors in the reporting countries. The survey report is not intended to serve as an introduction to PV, nor as a policy document. It is prepared to assist those responsible for developing the business strategies of PV companies and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. This report presents the results of the fifth International Survey. It provides an overview of PV power systems applications and markets in the reporting countries at the end of 1999 and analyses trends in the implementation of PV power systems between 1992 and 1999. (author)

  18. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2000

    International Nuclear Information System (INIS)

    2001-09-01

    As part of the PVPS programme, annual surveys of photovoltaics (PV) power applications and markets in the 20 participating countries are carried out. The objective of the survey reports is to present and interpret trends in both PV systems and components being used in the PV power systems market, and changing applications for these products within that market. These trends are analyzed in the context of the business, policy and non-technical environment in the reporting countries. The survey report is not intended to serve as an introduction to PV, nor as a policy document. It is prepared to assist those responsible for developing the business strategies of PV companies and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. This report presents the results of the sixth international survey. It provides an overview of PV power systems applications and markets in the reporting countries at the end of 2000 and analyses trends in the implementation of PV power systems between 1992 and 2000. (author)

  19. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-09-15

    As part of the PVPS programme, annual surveys of photovoltaics (PV) power applications and markets in the 20 participating countries are carried out. The objective of the survey reports is to present and interpret trends in both PV systems and components being used in the PV power systems market, and changing applications for these products within that market. These trends are analyzed in the context of the business, policy and non-technical environment in the reporting countries. The survey report is not intended to serve as an introduction to PV, nor as a policy document. It is prepared to assist those responsible for developing the business strategies of PV companies and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. This report presents the results of the sixth international survey. It provides an overview of PV power systems applications and markets in the reporting countries at the end of 2000 and analyses trends in the implementation of PV power systems between 1992 and 2000. (author)

  20. Survey, design, development, and installation of micro hydel power generation

    International Nuclear Information System (INIS)

    Ijaz, M.

    2011-01-01

    This paper presents the survey, design, development and installation Of micro hydel power generation using low head Kaplan water turbine. Electricity production from hydro power has been and still is today, the first renewable source used to generate electricity. The development of energy from renewable is very important step in reduction of carbon emissions(CO/sub 2/).

  1. Large Scale Survey Data in Career Development Research

    Science.gov (United States)

    Diemer, Matthew A.

    2008-01-01

    Large scale survey datasets have been underutilized but offer numerous advantages for career development scholars, as they contain numerous career development constructs with large and diverse samples that are followed longitudinally. Constructs such as work salience, vocational expectations, educational expectations, work satisfaction, and…

  2. HTML5 web application development by example

    CERN Document Server

    Gustafson, JM

    2013-01-01

    The best way to learn anything is by doing. The author uses a friendly tone and fun examples to ensure that you learn the basics of application development. Once you have read this book, you should have the necessary skills to build your own applications.If you have no experience but want to learn how to create applications in HTML5, this book is the only help you'll need. Using practical examples, HTML5 Web Application Development by Example will develop your knowledge and confidence in application development.

  3. Developing Cognitive Models for Social Simulation from Survey Data

    Science.gov (United States)

    Alt, Jonathan K.; Lieberman, Stephen

    The representation of human behavior and cognition continues to challenge the modeling and simulation community. The use of survey and polling instruments to inform belief states, issue stances and action choice models provides a compelling means of developing models and simulations with empirical data. Using these types of data to population social simulations can greatly enhance the feasibility of validation efforts, the reusability of social and behavioral modeling frameworks, and the testable reliability of simulations. We provide a case study demonstrating these effects, document the use of survey data to develop cognitive models, and suggest future paths forward for social and behavioral modeling.

  4. A mini-UAV VTOL Platform for Surveying Applications

    Directory of Open Access Journals (Sweden)

    Kuldeep Rawat

    2014-05-01

    Full Text Available In this paper we discuss implementation of a mini-Unmanned Aerial Vehicle (UAV vertical take-off and landing (VTOL platform for surveying activities related to highway construction. Recent advances in sensor and communication technologies have allowed scaling sizes of unmanned aerial platforms, and explore them for tasks that are economical and safe over populated or inhabited areas. In highway construction the capability of mini-UAVs to survey in hostile and/or hardly accessible areas can greatly reduce human risks. The project focused on developing a cost effective, remotely controlled, fuel powered mini-UAV VTOL (helicopter platform with certain payload capacity and configuration and demonstrated its use in surveying and monitoring activities required for highway planning and construction. With an on-board flight recorder global positioning system (GPS device, memory storage card, telemetry, inertial navigation sensors, and a video camera the mini-UAV can record flying coordinates and relay live video images to a remote ground receiver and surveyor. After all necessary integration and flight tests were done the mini-UAV helicopter was tested to operate and relay video from the areas where construction was underway. The mini-UAV can provide a platform for a range of sensors and instruments that directly support the operational requirements of transportation sector.

  5. Formal methods for industrial critical systems a survey of applications

    CERN Document Server

    Margaria-Steffen, Tiziana

    2012-01-01

    "Today, formal methods are widely recognized as an essential step in the design process of industrial safety-critical systems. In its more general definition, the term formal methods encompasses all notations having a precise mathematical semantics, together with their associated analysis methods, that allow description and reasoning about the behavior of a system in a formal manner.Growing out of more than a decade of award-winning collaborative work within the European Research Consortium for Informatics and Mathematics, Formal Methods for Industrial Critical Systems: A Survey of Applications presents a number of mainstream formal methods currently used for designing industrial critical systems, with a focus on model checking. The purpose of the book is threefold: to reduce the effort required to learn formal methods, which has been a major drawback for their industrial dissemination; to help designers to adopt the formal methods which are most appropriate for their systems; and to offer a panel of state-of...

  6. Accelerator development for medical applications

    International Nuclear Information System (INIS)

    Tanabe, Eiji

    2007-01-01

    Electron linear accelerators have been widely used in medical applications, especially in radiation therapy for cancer treatment. There are more than 7,000 medical electron linear accelerators in the world, treating over 250,000 patients per day. This paper reviews the current status of accelerator applications and technologies in radiation therapy, and presents the anticipated requirements for advanced radiation therapy technology in the foreseeable future. (author)

  7. Radiological survey techniques for decontamination and dismantlement applications

    International Nuclear Information System (INIS)

    Ruesink, G.P.; Stempfley, D.H.; Pettit, P.J.; Warner, R.D.

    1997-01-01

    The Department of Energy's Fernald Environmental Management Project (FEMP) is engaged in an aggressive Program to remove all above ground structures as part of the Fernald sites final remediation remedy. Through the complete removal of major facilities such as Plant 7, Plant 4, and Plant 1, the FEMP has developed radiological survey approaches that are effective for the different phases of the Decontamination and Dismantlement (D ampersand D) process. Some of the most pressing challenges facing the FEMP are implementing effective, low cost methods for the D ampersand D of former process buildings while minimizing environmental effects. One of the key components to ensure minimal impact on the environment is the collection of radiological contamination information during the D ampersand D process to facilitate the decision making process. Prior to the final demolition of any structure, radiological surveys of floors, walls, and ceilings must take place. These surveys must demonstrate that contamination levels am below 5000 dpm removable beta/gamma for non-porous surfaces and below 1000 dpm removable-beta/gamma for all porous surfaces. Technique which can perform these activities in a safe, effective, and cost efficient manner are greatly desired. The FEMP has investigated new approaches to address this need. These techniques include sampling approaches using standard baseline methodology as well as innovative approaches to accelerate final radiological clearance processes. To further improve upon this process, the FEMP has investigated several new technologies through the Fernald Plant 1 Large Scale Technology Demonstration Project. One of the most promising of these new technologies, Laser Induced Fluorescence, may significantly improve the radiological clearance survey process. This paper will present real world experiences in applying radiological control limits to D ampersand D projects as well as relate potential productivity and cost improvements with the

  8. The quality of sample surveys in a developing nation

    Directory of Open Access Journals (Sweden)

    Paul A Bourne

    2010-08-01

    Full Text Available Paul A Bourne1, Christopher AD Charles2,3, Neva South-Bourne4, Chloe Morris1, Denise Eldemire-Shearer1, Maureen D Kerr-Campbell51Department of Community Health and Psychiatry, Faculty of Medical Sciences, University of the West Indies, Mona, Kingston, Jamaica; 2King Graduate School, Monroe College, Bronx, New York, USA; 3Center for Victim Support, Harlem Hospital Center, New York, USA; 4Research assistant for Paul A Bourne; 5Systems Development Unit, Main Library, Faculty of Humanities and Education, University of the West Indies, Mona, Kingston, JamaicaBackground: In Jamaica, population census began in 1844, and many intercensal ratios obtained from the census data showed that there is a general high degree of accuracy of the data. However, statistics from the Jamaican Ministry of Health showed that there are inaccuracies in health data collected from males using sample surveys.Objectives: The objectives of the present research are to 1 investigate the accuracy of a national sample survey, 2 explore the feasibility and quality of using a subnational sample survey to represent a national survey, 3 aid other scholars in understanding the probability of using national sample surveys and subnational sample surveys, 4 assess older men’s ­evaluation of their health status, and 5 determine whether dichotomization changes self-evaluated health status.Methods: For the current study, the data used in the analysis were originally collected from 2 different sources: 1 the Jamaica Survey of Living Conditions (JSLC and 2 Survey of Older Men (SOM. Cross validation of self-evaluated data of men in Jamaica was done with comparable samples of the complete JSLC data and the SOM data, where men older than 55 years were selected from each sample.Results: In study 1, 50.2% of respondents indicated at least good self-evaluated health status compared with 74.0% in study 2. Statistical associations were found between health status and survey sample (Χ2 [df = 5

  9. Web Application Development Utilizing Cloud Virtual Machine

    OpenAIRE

    Muukka, Olli

    2014-01-01

    The thesis goes through a development project where a web application was implemented to support the start-up company business operations. The main reason to implement a web application was the company needed a system where business data is centrally managed with cost-efficient, simple and easy tool. The deployed cloud service provided a platform for the web application. The alternative to the web application development was to deploy commercial customer relationship management tool, but the ...

  10. Achievement report for fiscal 1997. Technological development for practical application of a solar energy power generation system (development of technology to manufacture thin film solar cells (surveys and researches on analyzing practical application )). Volume 1; 1997 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu (jitsuyoka kaiseki ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    It is intended to identify and analyze quickly and accurately the technological trends inside and outside the country on thin film solar cells, to reflect the results effectively on research and development of practical application of the thin film solar cells for power use, and to aid the research on practical application of the technology to manufacture the thin film solar cells. This fiscal year introduced the new project of researching and developing the poly-crystal silicon-based thin film solar cells. Discussions were given on designing the solar cells, including setting of thickness of an active layer required to improve efficiency of the silicon-based thin film solar cells, the light confining technology, and surface passivation. Comparisons and discussions were given on the new amorphous/poly-crystal silicon thin film manufacturing method and the conventional plasma CVD process. A research development program was introduced for a super laboratory to aid establishing the practical application technology for the silicon-based thin film solar cells. Chalcopyrite compounds including CuInSe2, and CdTe have not shown deterioration even in a long-term outdoor exposure test, hence they are noted as materials for high-efficiency solar cells and studied actively. Although still small in area, the net conversion efficiency was found in the order of 17%. Technological development has started to search mass production processes and commercialization possibility in the future. (NEDO)

  11. Secure Java For Web Application Development

    CERN Document Server

    Bhargav, Abhay

    2010-01-01

    As the Internet has evolved, so have the various vulnerabilities, which largely stem from the fact that developers are unaware of the importance of a robust application security program. This book aims to educate readers on application security and building secure web applications using the new Java Platform. The text details a secure web application development process from the risk assessment phase to the proof of concept phase. The authors detail such concepts as application risk assessment, secure SDLC, security compliance requirements, web application vulnerabilities and threats, security

  12. Validity of the language development survey in infants born preterm.

    Science.gov (United States)

    Beaulieu-Poulin, Camille; Simard, Marie-Noëlle; Babakissa, Hélène; Lefebvre, Francine; Luu, Thuy Mai

    2016-07-01

    Preterm infants are at greater risk of language delay. Early identification of language delay is essential to improve functional outcome in these children. To examine the concurrent validity of Rescorla's Language Development Survey and the Bayley Scales of Infant and Toddler Development (Bayley-III) at 18months corrected age in preterm infants. Test accuracy study. 189 preterm infants born Language Development Survey, a parent-reported screening instrument, was administered in French concurrently with the Language Scales of the Bayley-III. Receiver-Operating-Characteristics curves were used to determine optimal cut-off score on the Language Development Survey to identify Bayley-III score language delay as per the Bayley-III. The optimal threshold was ≤10 words for both boys and girls. In girls, lowering the cut-off score decreased sensitivity (79%), but improved specificity (82%), thus lowering the number of false-positives. Our findings support using the Language Development Survey as an expressive language screener in preterm infants. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  13. IMS Application Developer's Handbook Creating and Deploying Innovative IMS Applications

    CERN Document Server

    Noldus, Rogier; Mulligan, Catherine; Fikouras, Ioannis; Ryde, Anders; Stille, Mats

    2011-01-01

    IMS Application Developer Handbook will give a hands-on view of exactly what needs to be done by IMS application developers to write an application and take it "live" on an operator's network. It will offer practical guidance on building innovative applications using the features and capabilities of the IMS network, show how the rapidly changing development environment is impacting on the business models employed in the industry and how existing network solutions can be moved towards IMS. The book will also elaborate on how IMS applies basic VoIP principles and techniques to realise a true mul

  14. Handbook of Time Series Analysis Recent Theoretical Developments and Applications

    CERN Document Server

    Schelter, Björn; Timmer, Jens

    2006-01-01

    This handbook provides an up-to-date survey of current research topics and applications of time series analysis methods written by leading experts in their fields. It covers recent developments in univariate as well as bivariate and multivariate time series analysis techniques ranging from physics' to life sciences' applications. Each chapter comprises both methodological aspects and applications to real world complex systems, such as the human brain or Earth's climate. Covering an exceptionally broad spectrum of topics, beginners, experts and practitioners who seek to understand the latest de

  15. Development and Validation of the Poverty Attributions Survey

    Science.gov (United States)

    Bennett, Robert M.; Raiz, Lisa; Davis, Tamara S.

    2016-01-01

    This article describes the process of developing and testing the Poverty Attribution Survey (PAS), a measure of poverty attributions. The PAS is theory based and includes original items as well as items from previously tested poverty attribution instruments. The PAS was electronically administered to a sample of state-licensed professional social…

  16. An exploratory survey of the applications of telemedicine in Ghana.

    Science.gov (United States)

    Darkwa, O

    2000-01-01

    We examined the use of telemedicine at two major medical institutions in Ghana. Doctors and administrators were surveyed to assess their knowledge of computers and familiarity with telemedicine. The use of modern telecommunications and information technology products within the health service was also examined. Thirty questionnaires were distributed to staff at the two hospitals, one urban and one rural. Twenty were returned (a response rate of 67%). Although most of the respondents were computer literate, they were less familiar with telemedicine applications. Only a minority of the respondents were participating in an information-sharing network, transmitting information by fax or telephone, or had Internet access. Financial constraint appeared to be the major barrier to establishing information-sharing networks. Other constraints were technological and organizational. The respondents expressed an interest in using telemedicine, having access to health-care databases and specific telemedicine applications such as tele-education and videoconferencing. Staff in the urban hospital were more likely to be familiar with telemedicine and more likely to have access to information technology than those in the rural hospital.

  17. 47 CFR 0.489 - Applications for ship radio inspection and periodical survey.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Applications for ship radio inspection and... Taking Examinations § 0.489 Applications for ship radio inspection and periodical survey. Applications for ship radio inspection or for periodical survey shall be forwarded to the radio district office...

  18. School Development Applications in Turkey

    Science.gov (United States)

    Hosgörür, Vural

    2014-01-01

    This study aims to define and explain the establishment, functioning and problems of school development management teams (SDMTs), similar to quality circles used in total quality management practices, for the purposes of continuous development and improvement of schools on the basis of the planned school development model. This is a qualitative…

  19. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-09-15

    This report presents the results of the ninth international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2003 and analyzes trends in the implementation of PV power systems between 1992 and 2003. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to {+-} 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

  20. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-08-15

    This report presents the results of the eighth international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2002 and analyzes trends in the implementation of PV power systems between 1992 and 2002. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to {+-} 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

  1. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2002

    International Nuclear Information System (INIS)

    2003-08-01

    This report presents the results of the eighth international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2002 and analyzes trends in the implementation of PV power systems between 1992 and 2002. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to ± 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

  2. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2007

    International Nuclear Information System (INIS)

    2008-08-01

    This report presents the results of the 13 th international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2007 and analyzes trends in the implementation of PV power systems between 1992 and 2007. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to ± 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

  3. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2005

    International Nuclear Information System (INIS)

    2006-08-01

    This report presents the results of the 11 th international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2005 and analyzes trends in the implementation of PV power systems between 1992 and 2005. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to ± 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

  4. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-08-15

    This report presents the results of the 11{sup th} international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2005 and analyzes trends in the implementation of PV power systems between 1992 and 2005. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to {+-} 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

  5. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2006

    International Nuclear Information System (INIS)

    2007-08-01

    This report presents the results of the 12 th international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2006 and analyzes trends in the implementation of PV power systems between 1992 and 2006. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to ± 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

  6. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-08-15

    This report presents the results of the 13{sup th} international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2007 and analyzes trends in the implementation of PV power systems between 1992 and 2007. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to {+-} 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

  7. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-08-15

    This report presents the results of the 12{sup th} international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2006 and analyzes trends in the implementation of PV power systems between 1992 and 2006. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to {+-} 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

  8. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2003

    International Nuclear Information System (INIS)

    2004-09-01

    This report presents the results of the ninth international survey. It provides an overview of PV power systems applications, markets and applications in the reporting countries and elsewhere at the end of 2003 and analyzes trends in the implementation of PV power systems between 1992 and 2003. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to ± 10 %. Accuracy of data on production levels and system prices vary depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

  9. Development of instrumentation for airborne radiometric surveys in the Atomic Minerals Division: Past, present, and future

    International Nuclear Information System (INIS)

    Sreehari, R.

    1993-01-01

    A high-sensitivity airborne gamma-ray spectrometric and magnetic survey system, using Na(Tl) detector volume of 50,000 cc for 4π and 4195 cc for 2π geometry applications, was designed, developed, and fabricated in 1978 and was flown for airborne surveys in various parts of India for over a decade. A compact complementary metal-oxide-semiconductor (CMOS) logic circuit based high-sensitivity airborne gamma-ray spectrometric and magnetic survey system with high noise-immunity using Na(Tl) detector volume of 50,000 cc for 4π and 12,500 cc for 2π geometry applications was developed and interfaced to an Inertial Navigation System in 1988. The system currently in use was flown extensively for airborne surveys in various parts of India for the Atomic Minerals Division, Oil and Natural Gas Commission, and Nuclear Power Corporation. The design aspects of the present system have been discussed. A microprocessor based DDAS and multichannel analysers, having on-line micro terminal and on-line corrections for Compton scatter, and background radiation to obtain corrected analog profiles for the spectrometric data, are currently under development. The design aspects of these units are described and evaluated for future high-sensitivity airborne gamma-ray spectrometric surveys with Nal(Tl) detector volumes similar to those of the present system. (author). 8 refs., 3 figs., 1 tab

  10. The application of GPR in survey of Yongshan coalmine bridge

    International Nuclear Information System (INIS)

    Liao Yuhua; Deng Juzhi

    2007-01-01

    Ground penetrating radar (GPR) is an effective shoallow exploration method which uses the reflection of high frequency electromagnetism pulse wave to detect the object and geologic phenomena underground. With the development of electron and computer technique, the application domain of this method is keeping enlarge. Based on the working principle of GPR, this paper discussed the good effect of GPR to pier prospecting in Yongshan coal mines. Some matters that should be attentive are posed while using GPR. (authors)

  11. Zend Framework 2 application development

    CERN Document Server

    Valles, Christopher

    2013-01-01

    The book is really pragmatic, focusing on the key aspects you usually need to create an application. We skip the boring theory and jump straight to the action. Also, the examples don't try to be perfect, they just show the topic in question or the tool/components we are using. Here the focus is on the framework itself not on how to architect applications. The book will spend a lot of time reviewing the examples and each chapter is created around the example used to explain the topics so the example is first, then the explanation.This book is great for you if you are new to Zend Framework 2 and

  12. Phytosanitary irradiation - Development and application

    Science.gov (United States)

    Hallman, Guy J.; Loaharanu, Paisan

    2016-12-01

    Phytosanitary irradiation, the use of ionizing radiation to disinfest traded agricultural commodities of regulated pests, is a growing use of food irradiation that has great continued potential for increase in commercial application. In 2015 approximately 25,000 t of fresh fruits and vegetables were irradiated globally for phytosanitary purposes. Phytosanitary irradiation has resulted in a paradigm shift in phytosanitation in that the final burden of proof of efficacy of the treatment has shifted from no live pests upon inspection at a port of entry (as for all previous phytosanitary treatments) to total dependence on certification that the treatment for target pests is based on adequate science and is commercially conducted and protected from post-treatment infestation. In this regard phytosanitary irradiation is managed more like a hazard analysis and critical control point (HACCP) approach more consistent with food safety than phytosanitation. Thus, phytosanitary irradiation offers a more complete and rigorous methodology for safeguarding than other phytosanitary measures. The role of different organizations in achieving commercial application of phytosanitary irradiation is discussed as well as future issues and applications, including new generic doses.

  13. Customer Acceptance Survey On Chrysanthemum Mutant Developed By Nuclear Malaysia

    International Nuclear Information System (INIS)

    Shakinah Salleh; Zaiton Ahmad; Affrida Hassan; Shuhaimi Shamsudin; Nurul Hidayah Mahmud; Salim Othman; Mohamed Najli Mohamed Yasin

    2014-01-01

    Chrysanthemum morifolium is an important temperate cut flower for Malaysian floriculture industry and the lack of new local-owned varieties has led to this mutation breeding research. The project was started in 2008 under bilateral cooperation between Nuclear Malaysia and JAEA (Japan Atomic Energy Agency). Through this project, 8 new varieties of chrysanthemum were successfully developed, in which 4 varieties were from red cultivar and another 4 from pink cultivar. A preliminary survey on public perception and acceptance of these mutants was conducted on 7 January 2014 at Agrotechnology and Biosciences Division, Malaysian Nuclear Agency. The main objective of this survey was to gather information from the public on overall appearance of these new varieties and their potential for commercialization. Approximately 60 participants were involved in this survey, which include staff of Nuclear Malaysia, university students, plant growers/collectors and hobbyists. (author)

  14. Fiscal 1999 research and development of technologies for practical application of photovoltaic power generation systems. Development of ultrahigh-efficiency crystalline compound solar cell manufacturing technology (Survey and research on practical application - Volume 1); 1999 nendo taiyoko hatsauden system jitsuyoka gijutsu kaihatsu seika hokokusho. Chokokoritsu kessho kagobutsu taiyo denchi no seizo gijutsu kaihatsu (jitsuyoka kaiseki ni kansuru chosa kenkyu - 1)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    A 'Sub-committee for investigation of crystalline compound semiconductor solar cells' was established with the participation of experts from the industrial, bureaucratic, and academic circles to support the manufacture of ultrahigh-efficiency crystalline compound solar cells, and a survey was conducted about technical trends relating to III-V group compound solar cells. In the study of the trends and tasks of the state of the art technology, it is stated that the III-V group compound semiconductor multi-junction solar cell was steadily improving in efficiency, that the InGaP/GaAs 2-junction cell on a Ge substrate and InGaP/GaAs/Ge 3-junction cell in particular were moving toward mass production, and that the target for the 4-junction cell to achieve was 40% or higher in efficiency. For cost reduction, investigations were made into the heteroepitaxial technology, dimensional enlargement, mass production, raw material cost reduction, feasibility of the polycrystalline thin-film technology, light concentration, etc. For efficiency improvement, boundary layer control, structure designs, etc., were studied. Investigations were also conducted into nitride semiconductors, superlattice construction, etc., which related to new materials for thin films. TPV (thermophotovoltaic) power, etc., were reviewed for their practical application. (NEDO)

  15. WordPress web application development

    CERN Document Server

    Ratnayake, Rakhitha Nimesh

    2013-01-01

    An extensive, practical guide that explains how to adapt WordPress features, both conventional and trending, for web applications.This book is intended for WordPress developers and designers who have the desire to go beyond conventional website development to develop quality web applications within a limited time frame and for maximum profit. Experienced web developers who are looking for a framework for rapid application development will also find this to be a useful resource. Prior knowledge with of WordPress is preferable as the main focus will be on explaining methods for adapting WordPres

  16. Survey and research on applications of parallel compiler; Heiretsu compiler tekiyorei ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-31

    An urgent proposition is made that an advanced computing software program development and maintenance system be set up, and activities are conducted in search of strategies and guidelines for the establishment of such a system. Out of recognition that it is important to develop software programs such as operation systems for supercomputers, a survey is conducted of software technology development strategies especially involving application software programs. It is proposed that efforts be positively exerted to develop strategic software developing programs for advanced computing for concentratedly enhancing the development now under way of strategic software programs. In concrete terms, named as strategic software programs to be developed are a next-generation semiconductor TCAD (technology computer-aided design) system, protein structure/function analysis system, fatigue simulation system, next-generation fluid analysis system, chemical reaction simulator, grid computing, and a nanodevice surface analysis system. (NEDO)

  17. JavaScript mobile application development

    CERN Document Server

    Saleh, Hazem

    2014-01-01

    If you are a native mobile developer, with some familiarity with the common web technologies of JavaScript, CSS, and HTML, or if you are a web developer, then this learning guide will add great value and impact to your work. Learning how to develop mobile applications using Apache Cordova is of particular importance if you are looking to develop applications on a variety of different platforms efficiently.

  18. PSA methodology development and application in Japan

    International Nuclear Information System (INIS)

    Kazuo Sato; Toshiaki Tobioka; Kiyoharu Abe

    1987-01-01

    The outlines of Japanese activities on development and application of probabilistic safety assessment (PSA) methodologies are described. First the activities on methodology development are described for system reliability analysis, operational data analysis, core melt accident analysis, environmental consequence analysis and seismic risk analysis. Then the methodoligy application examples by the regulatory side and the industry side are described. (author)

  19. Development and Evaluation of Educational Android Application

    Science.gov (United States)

    Kocakoyun, Senay; Bicen, Huseyin

    2017-01-01

    In this study, a mobile application was developed for courses at undergraduate level. The application has not only been developed and used, but has also been used practically for 8 weeks. In other words, the findings are based on a practical experience rather than a theoretical basis. This study aimed to determine the opinions of students who…

  20. Appcelerator Titanium business application development cookbook

    CERN Document Server

    Bahrenberg, Benjamin

    2013-01-01

    Presented in easy to follow, step by step recipes, this guide is designed to lead you through the most important aspects of application design.Titanium developers who already have a basic knowledge of working with Appcelerator Titanium but want to further develop their knowledge for use with business applications

  1. Development of PIC-based digital survey meter

    International Nuclear Information System (INIS)

    Nor Arymaswati Abdullah; Nur Aira Abdul Rahman; Mohd Ashhar Khalid; Taiman Kadni; Glam Hadzir Patai Mohamad; Abd Aziz Mhd Ramli; Chong Foh Yong

    2006-01-01

    The need of radiation monitoring and monitoring of radioactive contamination in the workplace is very important especially when x-ray machines, linear accelerators, electron beam machines and radioactive sources are present. The appropriate use of radiation detector is significant in order to maintain a radiation and contamination free workplace. This paper reports on the development of a prototype of PIC-based digital survey meter. This prototype of digital survey meter is a hand held instrument for general-purpose radiation monitoring and surface contamination meter. Generally, the device is able to detect some or all of the three major types of ionizing radiation, namely alpha, beta and gamma. It uses a Geiger-Muller tube as a radiation detector, which converts gamma radiation quanta to electric pulses and further processed by the electronic devices. The development involved the design of the controller, counter and high voltage circuit. All these circuit are assembled and enclosed in a plastic casing together with a GM detector and LCD display to form a prototype survey meter. The number of counts of the pulses detected by the survey meter varies due to the random nature of radioactivity. By averaging the reading over a time-period, more accurate and stable reading is achieved. To test the accuracy and the linearity of the design, the prototype was calibrated using standard procedure at the Secondary Standard Dosimetry Laboratory (SSDL) in MINT. (Author)

  2. AngularJS in the Wild: A Survey with 460 Developers

    OpenAIRE

    Ramos, Miguel; Valente, Marco Tulio; Terra, Ricardo; Santos, Gustavo

    2016-01-01

    To implement modern web applications, a new family of JavaScript frameworks has emerged, using the MVC pattern. Among these frameworks, the most popular one is AngularJS, which is supported by Google. In spite of its popularity, there is not a clear knowledge on how AngularJS design and features affect the development experience of Web applications. Therefore, this paper reports the results of a survey about AngularJS, including answers from 460 developers. Our contributions include the ident...

  3. A survey of geothermal process heat applications in Guatemala: An engineering survey

    Energy Technology Data Exchange (ETDEWEB)

    Altseimer, J.H.; Edeskuty, F.J.

    1988-08-01

    This study investigates how process heat from Guatemala's geothermal energy resources can be developed to reduce Guatemala's costly importation of oil, create new employment by encouraging new industry, and reduce fuel costs for existing industry. This investigation was funded by the US Agency for International Development and carried out jointly by the Guatemalan Government and the Los Alamos National Laboratory. Two sites, Amatitlan and Zunil, are being developed geothermally. Amatitlan is in the better industrial area but Zunil's geothermal development is more advanced. The industry around Zunil is almost exclusively agricultural and the development of an agricultural processing plant (freezing, dehydration, and cold storage) using geothermal heat is recommended. Similar developments throughout the volcanic zones of Guatemala are possible. Later, when the field at Amatitlan has been further developed, an industrial park can be planned. Potential Amatitlan applications are the final stage of salt refining, a thermal power plant, hospital/hotel heating and cooling, steam curing of concrete blocks, production of alcohol from sugar cane, and production of polyethylene from ethanol. Other special developments such as water pumping for the city of Guatemala and the use of moderate-temperature geothermal fluids for localized power production are also possible. 12 refs., 13 figs., 14 tabs.

  4. A Survey of Formal Methods in Software Development

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2012-01-01

    The use of formal methods and formal techniques in industry is steadily growing. In this survey we shall characterise what we mean by software development and by a formal method; briefly overview a history of formal specification languages - some of which are: VDM (Vienna Development Method, 1974...... need for multi-language formalisation (Petri Nets, MSC, StateChart, Temporal Logics); the sociology of university and industry acceptance of formal methods; the inevitability of the use of formal software development methods; while referring to seminal monographs and textbooks on formal methods....

  5. National survey report on PV power applications in Switzerland 2006

    International Nuclear Information System (INIS)

    Huesser, P.; Hostettler, T.

    2007-01-01

    This annual report was published by the Swiss Federal Office of Energy (SFOE) as part of the International Energy Agency's work on the exchange and dissemination of information on photovoltaic power systems (PVPS). The political situation in Switzerland with regard to the promotion of photovoltaics (PV) and new legislation in the energy area is discussed. The report provides information on installed PV power, costs and prices and the Swiss PV industry. Examples of PV applications are presented and data on the cumulative installed PV power in various application sectors is presented and discussed. Highlights, major projects and various demonstration and field-test programmes are dealt with, as are public budgets for market stimulation. Figures on the development, production and prices of PV cells and modules are presented. Swiss balance-of-system products are reviewed, as are PV-related services and the value of the Swiss PV business. A review of non-technical factors and new initiatives completes the report.

  6. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2001

    International Nuclear Information System (INIS)

    2002-08-01

    This report presents the results of the seventh international survey. It provides an overview of PV power systems applications and markets in the reporting countries at the end of 2001 and analyzes trends in the implementation of PV power systems between 1992 and 2001. The survey report is not intended to serve as an introduction to PV technology, nor as a policy document. It is prepared to assist those responsible for developing the business strategies of PV companies and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. (author)

  7. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-08-15

    This report presents the results of the seventh international survey. It provides an overview of PV power systems applications and markets in the reporting countries at the end of 2001 and analyzes trends in the implementation of PV power systems between 1992 and 2001. The survey report is not intended to serve as an introduction to PV technology, nor as a policy document. It is prepared to assist those responsible for developing the business strategies of PV companies and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. (author)

  8. Beginning Android 4 Application Development

    CERN Document Server

    Lee, Wei-Meng

    2012-01-01

    Understand Android OS for both smartphone and tablet programming This fast-paced introduction to the newest release of Android OS gives aspiring mobile app developers what they need to know to program for today's hottest Android smartphones and tablets. Android 4 OS is, for the first time, a single solution for both smartphones and tablets, so if you master the information in this helpful guide, you'll be well on your way to successful development for both devices. From using activities and intents and creating rich user interfaces to working with SMS, messaging APIs, and the Android SDK, what

  9. Survey of basic data on human resources development (HRD) in the nuclear field in FNCA countries (Contract research)

    International Nuclear Information System (INIS)

    2005-03-01

    In the 3rd FNCA* (Forum for Nuclear Cooperation in Asia) Coordinator Meeting held on March 2002, it was proposed to carry out 'Survey of the Basic Data on Human Resources Development in the Nuclear Field'. It was considered to be the first step for developing the HRD strategy by producing the quantitative data on HRD in nuclear field. The survey results were introduced by Project Leaders during the 2002 FNCA Workshop on HRD held on October 2002. The follow-up survey was conducted with the cooperation of other Project Leaders in the respective field of FNCA such as medical and agriculture applications in each member countries. The collected survey data was analyzed in 2003, and summarized as 'Summary of the Survey Data'. This report consists of the summary of 'Survey of the Basic Data on Human Resources Development in Nuclear Field'. It was reported during the 2003 FNCA Workshop on HRD held on October 2003 and updated until early 2004. (author)

  10. Preschool Teachers' Attitudes toward Internet Applications for Professional Development in Taiwan

    Science.gov (United States)

    Chen, Ru-Si

    2016-01-01

    This study focuses on preschool teachers' attitudes toward integrated Internet applications for professional development by a survey in Taiwan. The researcher developed a survey questionnaire consisting of five factors: usefulness, effectiveness, behavioral intention, Internet connection, and professional competence. This study analyzed the survey…

  11. Neural network-based survey analysis of risk management practices in new product development

    DEFF Research Database (Denmark)

    Kampianakis, Andreas N.; Oehmen, Josef

    2017-01-01

    The current study investigates the applicability of Artificial Neural Networks (ANNs) to analyse survey data on the effectiveness of risk management practices in product development (PD) projects, and its ability to forecast project outcomes. Moreover, this study presents the relations between risk...... Neural Networks. Dataset used is a filtered survey of 291 product development programs. Answers of this survey are used as training input and target output, in pattern recognition two-layer feed forward networks, using various transfer functions. Using this method, relations among 6 project practices...... and 13 outcome metrics were revealed. Results of this analysis are compared with existent results made through statistical analysis in prior work of one of the authors. Future investigation is needed in order to tackle the lack of data and create an easy to use platform for industrial use....

  12. Development of aerial gamma radiation survey system, 1

    International Nuclear Information System (INIS)

    Tsutsumi, Masahiro; Saito, Komei; Sakamoto, Ryuichi; Nagaoka, Toshi; Moriuchi, Shigeru

    1986-05-01

    JAERI has started to develop an aerial gamma radiation survey system by a helicopter in 1980. The development of measuring instruments, the experiments in the field of natural and artificial radiation sources, and the imaginary emergency survey at a real site, were executed. This report describes mainly about the hardware and software of this system. The system consists of gamma-ray measuring instruments with NaI(Tl) scintillation detectors, microwave positioning instruments, and a data processing system for postflight data. A foreign-made geological survey system is improved on for radiation measurements. For covering the wide radiation range, detectors of various shapes and sizes are prepared, from a large volume detector, DET-1024 - four 4'' x 4'' x 16'' crystals assembly - to a 2'' diameter x 2'' NaI(Tl) crystal. Radiation and position data are recorded on a magnetic tape, and computer-processed afterwards. Moreover, scene below flight courses and internal communication are recorded on video tape with the information of clock and position superimposed. In consequence of field experiments carried out five times, basic radiation data for evaluating airborne acquired data are accumulated, and flight survey procedures are established. As more practical use, a system has been produced more compactly and functionally. Exposure rates (> 1 mR/h), energy distribution spectra, and energy window counts are obtained for radiation data. Using the Spectrum-Dose Conversion Method, the accurate exposure rates are directly calculated from pulse height spectra. Numerical tables of G(E) function converting pulse height spectra into exposures are shown in this report. As regards the analysis of survey data, process codes have been completed with either large-computer or mini-computer. (author)

  13. Learning Laravel 4 application development

    CERN Document Server

    Dangar, Hardik

    2014-01-01

    This book is written in a simple and easy-to-understand manner, with each chapter contributing as a standalone project that will give you as a reader something to reflect on as you're learning.This book is aimed at amateur PHP developers with a desire to get a firm understanding of the Lavarel 4 framework. Basic knowledge of PHP will be helpful, however in-depth knowledge is not a must.

  14. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2008

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-09-15

    This report presents the results of the 14{sup th} international survey. It provides an overview of PV power systems applications, markets and production in the reporting countries and elsewhere at the end of 2008 and analyzes trends in the implementation of PV power systems between 1992 and 2008. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to{+-}10 %. Accuracy of data on production levels and system prices varies depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

  15. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 2008

    International Nuclear Information System (INIS)

    2009-09-01

    This report presents the results of the 14 th international survey. It provides an overview of PV power systems applications, markets and production in the reporting countries and elsewhere at the end of 2008 and analyzes trends in the implementation of PV power systems between 1992 and 2008. This report is not intended to serve as an introduction to PV technology. It is prepared to assist those responsible for developing the strategies of businesses and public authorities, and to aid the development of medium term plans for electricity utilities and other providers of energy services. It also provides guidance to government officials responsible for setting energy policy and preparing national energy plans. The scope of the report is limited to PV applications with a rated power of 40 W or more. Most national data supplied were accurate to±10 %. Accuracy of data on production levels and system prices varies depending on the willingness of the relevant national PV industry to provide data for the survey. Key data for this publication were drawn from national survey reports, which were supplied by representatives from each of the participating countries. (author)

  16. Survey of high-temperature nuclear heat application

    International Nuclear Information System (INIS)

    Kirch, N.; Schaefer, M.

    1984-01-01

    Nuclear heat application at high temperatures can be divided into two areas - use of high-temperature steam up to 550 deg. C and use of high-temperature helium up to about 950 deg. C. Techniques of high-temperature steam and heat production and application are being developed in several IAEA Member States. In all these countries the use of steam for other than electricity production is still in a project definition phase. Plans are being discussed about using steam in chemical industries, oil refineries and for new synfuel producing plants. The use of nuclear generated steam for oil recovery from sands and shale is also being considered. High-temperature nuclear process heat production gives new possibilities for the application of nuclear energy - hard coals, lignites, heavy oils, fuels with problems concerning transport, handling and pollution can be converted into gaseous or liquid energy carriers with no loss of their energy contents. The main methods for this conversion are hydrogasification with hydrogen generated by nuclear heated steam reformers and steam gasification. These techniques will allow countries with large coal resources to replace an important part of their natural gas and oil consumption. Even countries with no fossil fuels can benefit from high-temperature nuclear heat - hydrogen production by thermochemical water splitting, nuclear steel making, ammonia production and the chemical heat-pipe system are examples in this direction. (author)

  17. Challenging the role of social norms regarding body weight as an explanation for weight, height, and BMI misreporting biases: Development and application of a new approach to examining misreporting and misclassification bias in surveys

    LENUS (Irish Health Repository)

    Brestoff, Jonathan R

    2011-05-18

    Abstract Background Cultural pressures to be thin and tall are postulated to cause people to misreport their body weight and height towards more socially normative (i.e., desirable) values, but a paucity of direct evidence supports this idea. We developed a novel non-linear approach to examining weight, height, and BMI misreporting biases and used this approach to examine the association between socially non-normative weight and misreporting biases in adults. Methods The Survey of Lifestyles, Attitudes, and Nutrition 2007 (SLÁN 2007), a nationally representative survey of the Republic of Ireland (N = 1942 analyzed) was used. Self-reported weight (height) was classified as under-reported by ≥2.0 kg (2.0 cm), over-reported by ≥2.0 kg (2.0 cm), or accurately reported within 2.0 kg (2.0 cm) to account for technical errors of measurement and short-term fluctuations in measured weight (height). A simulation strategy was used to define self-report-based BMI as under-estimated by more than 1.40 kg\\/m2, over-estimated by more than 1.40 kg\\/m2, or accurately estimated within 1.40 kg\\/m2. Patterns of biases in self-reported weight, height, and BMI were explored. Logistic regression was used to identify factors associated with mis-estimated BMI and to calculate adjusted odds ratios (AOR) and 99% confidence intervals (99%CI). Results The patterns of bias contributing the most to BMI mis-estimation were consistently, in decreasing order of influence, (1) under-reported weight combined with over-reported height, (2) under-reported weight with accurately reported height, and (3) accurately reported weight with over-reported height. Average bias in self-report-based BMI was -1.34 kg\\/m2 overall and -0.49, -1.33, and -2.66 kg\\/m2 in normal, overweight, and obese categories, respectively. Despite the increasing degree of bias with progressively higher BMI categories, persons describing themselves as too heavy were, within any given BMI category, less likely to have under

  18. Twitter Application Development For Dummies

    CERN Document Server

    Reagan, Dusty

    2010-01-01

    Get the guide to planning, developing and monetizing apps for Twitter!. Twitter is the one of the hottest trends in social networking. With several million users, Twitter's popularity is growing everyday. Twitter will continue to increase user base while third-party companies keep popping up all over to make money building Twitter apps for phones, advertising tools, analytics/management tools and more. Some of the most popular Twitter apps include TwitPic, Twhirl, TweetDeck, and FriendorFollow. With this book, author Dusty Reagan uses one of his unpublished Twitter app ideas and takes you thro

  19. The Trauma Center Organizational Culture Survey: development and conduction.

    Science.gov (United States)

    Davis, Matthew L; Wehbe-Janek, Hania; Subacius, Haris; Pinto, Ruxandra; Nathens, Avery B

    2015-01-01

    The Trauma Center Organizational Culture Survey (TRACCS) instrument was developed to assess organizational culture of trauma centers enrolled in the American College of Surgeons Trauma Quality Program (ACS TQIP). The objective is to provide evidence on the psychometric properties of the factors of TRACCS and describe the current organizational culture of TQIP-enrolled trauma centers. A cross-sectional study was conducted by surveying a sampling of employees at 174 TQIP-enrolled trauma centers. Data collection was preceded by multistep survey development. Psychometric properties were assessed by an exploratory factor analysis (construct validity) and the item-total correlations and Cronbach alpha were calculated (internal reliability). Statistical outcomes of the survey responses were measured by descriptive statistics and mixed effect models. The response rate for trauma center participation in the study was 78.7% (n = 137). The factor analysis resulted in 16 items clustered into three factors as described: opportunity, pride, and diversity, trauma center leadership, and employee respect and recognition. TRACCS was found to be highly reliable with a Cronbach alpha of 0.90 in addition to the three factors (0.91, 0.90, and 0.85). Considerable variability of TRACCS overall and factor score among hospitals was measured, with the largest interhospital deviations among trauma center leadership. More than 80% of the variability in the responses occurred within rather than between hospitals. TRACCS was developed as a reliable tool for measuring trauma center organizational culture. Relationships between TQIP outcomes and measured organizational culture are under investigation. Trauma centers could apply TRACCS to better understand current organizational culture and how change tools can impact culture and subsequent patient and process outcomes. Copyright © 2015 Elsevier Inc. All rights reserved.

  20. Developing data-intensive applications on Facebook

    OpenAIRE

    Hribar, Rok

    2011-01-01

    Facebook applications are becoming an important asset to companies in marketing and promotion of their services or products. For easier and more efficient marketing for companies there are many different data-intensive Facebook applications that businesses can use. Data-intensive applications require large amounts of data, the greater part of the implementation is used primarily for searching and transfering data from database. In my graduation thesis I focused on the development, transfe...

  1. Nuclear data applications in developing countries

    International Nuclear Information System (INIS)

    Mehta, M.K.; Schmidt, J.J.

    1985-01-01

    The peaceful applications of nuclear science and technology currently receive an increasing attention in many developing countries. More than 15 developing countries operate, construct or plan nuclear power reactors, 70 developing countries are using or planning to use nuclear techniques in medicine, agriculture, industry, and for other vital purposes. The generation, application and computer processing of nuclear data constitute important elements of the nuclear infrastructure needed for the successful implementation of nuclear science and technology. Developing countries become increasingly aware of this need, and, with the help and cooperation of the IAEA Nuclear Data Section, are steadily gaining in experience in this field. The paper illustrates this development in typical examples. (orig.)

  2. Oracle ADF enterprise application development made simple

    CERN Document Server

    Vesterli, Sten E

    2014-01-01

    This book is written in an easy-to-understand style, following an enterprise development process through all the phases of development and deployment. Concepts are illustrated with real-world examples and the methods used are explained step-by-step.This book is for Oracle developers looking to start using Oracle's latest development tool and J2EE developers looking for a more productive way to build modern web applications. This book will guide you through the creation of a successful enterprise application with Oracle ADF 12c, and therefore it assumes you have basic knowledge of Java, JDevelo

  3. Technology, design and dementia: an exploratory survey of developers.

    Science.gov (United States)

    Jiancaro, Tizneem; Jaglal, Susan B; Mihailidis, Alex

    2017-08-01

    Despite worldwide surges in dementia, we still know relatively little about the design of home technologies that support this population. The purpose of this study was to investigate design considerations from the perspective of developers. Participants, including technical and clinical specialists, were recruited internationally and answered web-based survey questions comprising Likert-type responses with text entry options. Developers were queried on 23 technology acceptance characteristics and 24 design practices. In all, forty developers completed the survey. Concerning "technology acceptance", cost, learnability, self-confidence (during use) and usability were deemed very important. Concerning "design practice", developers overwhelmingly valued user-centred design (UCD). In terms of general assistive technology (AT) models, these were largely unknown by technical specialists compared to clinical specialists. Recommendations based on this study include incorporating "self-confidence" into design protocols; examining the implications of "usability" and UCD in this context; and considering empathy-based design approaches to suit a diverse user population. Moreover, clinical specialists have much to offer development teams, particularly concerning the use of conceptual AT models. Implications of rehabilitation Stipulate precise usability criteria. Consider "learnability" and "self-confidence" as technology adoption criteria. Recognize the important theoretical role that clinical specialists can fulfil concerning the use of design schemas. Acknowledge the diversity amongst users with dementia, potentially adopting techniques, such as designing for "extraordinary users".

  4. Drones application on snow and ice surveys in alpine areas

    Science.gov (United States)

    La Rocca, Leonardo; Bonetti, Luigi; Fioletti, Matteo; Peretti, Giovanni

    2015-04-01

    First results from Climate change are now clear in Europe, and in Italy in particular, with the natural disasters that damaged irreparably the territory and the habitat due to extreme meteorological events. The Directive 2007/60/EC highlight that an "effective natural hazards prevention and mitigation that requires coordination between Member States above all on natural hazards prevention" is necessary. A climate change adaptation strategy is identified on the basis of the guidelines of the European Community program 2007-2013. Following the directives provided in the financial instrument for civil protection "Union Civil Protection Mechanism" under Decision No. 1313/2013 / EU of the European Parliament and Council, a cross-cutting approach that takes into account a large number of implementation tools of EU policies is proposed as climate change adaptation strategy. In last 7 years a network of trans-Alpine area's authorities was created between Italy and Switzerland to define an adaptive strategy on climate change effects on natural enviroment based on non structural remedies. The Interreg IT - CH STRADA Project (STRategie di ADAttamento al cambiamento climatico) was born to join all the non structural remedies to climate change effects caused by snow and avalanches, on mountain sources, extreme hydrological events and to manage all transnational hydrological resources, involving all stakeholders from Italy and Switzerland. The STRADA project involved all civil protection authorities and all research centers in charge of snow, hydrology end civil protection. The Snow - meteorological center of the Regional Agency for Environment Protection (CNM of ARPA Lombardia) and the Civil Protection of Lombardy Region created a research team to develop tools for avalanche prediction and to observe and predict snow cover on Alpine area. With this aim a lot of aerial photo using Drone as been performed in unusual landscape. Results of all surveys were really interesting on a

  5. Development and Application of SITES

    International Nuclear Information System (INIS)

    Park, Jo Wan; Yoon; Yoon, Jeong Hyoun; Kim, Chank Lak; Cho, Sung IL

    2008-01-01

    SITES (Site Information and Total Environmental Data Management System) has been developed for the purpose of systematically managing site characteristics and environmental data produced during the pre-operational, operational, and post-closure phases of a radioactive waste disposal facility. SITES is an integration system, which consists of 4 modules, to be available for maintenance of site characteristics data, for safety assessment, and for site/environment monitoring; site environmental data management module (SECURE), integrated safety assessment module (SAINT), site/environment monitoring module (SUDAL) and geological information module for geological data management (SITES-GIS). Each module has its database with the functions of browsing, storing, and reporting data and information. Data from SECURE and SUDAL are interconnected to be utilized as inputs to SAINT. SAINT has the functions that multi-user can access simultaneously via client-server system, and the safety assessment results can be managed with its embedded Quality Assurance feature. Comparison between assessment results and environmental monitoring data can be made and visualized in SUDAL and SITES-GIS. Also, SUDAL is designed that the periodic monitoring data and information could be opened to the public via internet homepage. SITES has applied to the Wolsong low- and intermediate-level radioactive waste disposal center in Korea, and is expected to enhance the function of site/environment monitoring in other nuclear-related facilities and also in industrial facilities handling hazardous materials.

  6. Biotechnology development for biomedical applications.

    Energy Technology Data Exchange (ETDEWEB)

    Kuehl, Michael; Brozik, Susan Marie; Rogers, David Michael; Rempe, Susan L.; Abhyankar, Vinay V.; Hatch, Anson V.; Dirk, Shawn M.; Hedberg-Dirk, Elizabeth (University of New Mexico, Albuquerque, NM); Sukharev, Sergei (University of Maryland, College Park, MD); Anishken, Andriy (University of Maryland, College Park, MD); Cicotte, Kirsten; De Sapio, Vincent; Buerger, Stephen P.; Mai, Junyu

    2010-11-01

    Sandia's scientific and engineering expertise in the fields of computational biology, high-performance prosthetic limbs, biodetection, and bioinformatics has been applied to specific problems at the forefront of cancer research. Molecular modeling was employed to design stable mutations of the enzyme L-asparaginase with improved selectivity for asparagine over other amino acids with the potential for improved cancer chemotherapy. New electrospun polymer composites with improved electrical conductivity and mechanical compliance have been demonstrated with the promise of direct interfacing between the peripheral nervous system and the control electronics of advanced prosthetics. The capture of rare circulating tumor cells has been demonstrated on a microfluidic chip produced with a versatile fabrication processes capable of integration with existing lab-on-a-chip and biosensor technology. And software tools have been developed to increase the calculation speed of clustered heat maps for the display of relationships in large arrays of protein data. All these projects were carried out in collaboration with researchers at the University of Texas M. D. Anderson Cancer Center in Houston, TX.

  7. Development of custom LCD based portable survey/contamination monitors

    International Nuclear Information System (INIS)

    Reddy, J.D.

    2010-01-01

    Equipments for carrying out radiation survey measurements for alpha, beta and gamma radiations have evolved considerably with the advancements in Electronics overtime. There are 2 major classes of portable instruments available from most manufacturers - (a) Analog indicator type (b) Direct digital readout type. Analog meters give a direct quantifying feel to radiation levels though they are not rich features nor they have smartness like a digital meter. Digital versions have advantages of direct readout numerically and configurable as per users requirements. To achieve best features of both the techniques a dual indicator type LCD module comprising of Analog indicating LCD segments and digital readout indicating 7 segments has been developed. This LCD comprising of LCD glass and its display driver has been deployed across various types of survey meters and contamination monitors manufactured by Nucleonix. This display now facilitates direct readout of dose rate/count rate in various units simultaneously in both analog LCD scale and direct digital indication. (author)

  8. Standardization of software application development and governance

    OpenAIRE

    Labbe, Peter P.

    2015-01-01

    Approved for public release; distribution is unlimited A number of Defense Department initiatives focus on how to engineer better systems that directly influence software architecture, including Open Architecture, Enterprise Architecture, and Joint Information Enterprise. Additionally, the Department of Defense (DOD) mandates moving applications to consolidated datacenters and cloud computing. When examined from an application development perspective, the DOD lacks a common approach for in...

  9. Xamarin cross-platform application development

    CERN Document Server

    Peppers, Jonathan

    2015-01-01

    If you are a developer with experience in C# and are just getting into mobile development, this is the book for you. If you have experience with desktop applications or the Web, this book will give you a head start on cross-platform development.

  10. A Comprehensive Approach to WSN-Based ITS Applications: A Survey

    Directory of Open Access Journals (Sweden)

    Joan Garcia-Haro

    2011-10-01

    Full Text Available In order to perform sensing tasks, most current Intelligent Transportation Systems (ITS rely on expensive sensors, which offer only limited functionality. A more recent trend consists of using Wireless Sensor Networks (WSN for such purpose, which reduces the required investment and enables the development of new collaborative and intelligent applications that further contribute to improve both driving safety and traffic efficiency. This paper surveys the application of WSNs to such ITS scenarios, tackling the main issues that may arise when developing these systems. The paper is divided into sections which address different matters including vehicle detection and classification as well as the selection of appropriate communication protocols, network architecture, topology and some important design parameters. In addition, in line with the multiplicity of different technologies that take part in ITS, it does not consider WSNs just as stand-alone systems, but also as key components of heterogeneous systems cooperating along with other technologies employed in vehicular scenarios.

  11. Survey of the hypervelocity impact technology and applications.

    Energy Technology Data Exchange (ETDEWEB)

    Chhabildas, Lalit Chandra; Orphal, Dennis L.

    2006-05-01

    made that is beneficial for continuous development of hypervelocity impact technology and applications even with the relatively limited resources that are being directed in this field.

  12. Teaching web application development: Microsoft proprietary or open systems?

    Directory of Open Access Journals (Sweden)

    Stephen Corich

    Full Text Available This paper revisits the debate concerning which development environment should be used to teach server-side Web Application Development courses to undergraduate students. In 2002, following an industry-based survey of Web developers, a decision was made to adopt an open source platform consisting of PHP and MySQL rather than a Microsoft platform utilising Access and Active Server Pages. Since that date there have been a number of significant changes within the computing industry that suggest that perhaps it is appropriate to revisit the original decision. This paper investigates expert opinion by reviewing current literature regarding web development environments, it looks at the results of a survey of web development companies and it examines the current employment trends in the web development area. The paper concludes by examining the impact of making a decision to change the development environment used to teach Web Application Development to a third year computing degree class and describes the impact on course delivery that the change has brought about.

  13. Mobile Application Development: Component Retrieval System

    Data.gov (United States)

    National Aeronautics and Space Administration — The purpose of this project was to investigate requirements to develop an innovative mobile application to retrieve components’ detailed information from the Stennis...

  14. CoffeeScript application development cookbook

    CERN Document Server

    Hatfield, Mike

    2015-01-01

    If you are interested in developing modern applications, this book will help you leverage the vast JavaScript ecosystem while using an elegant language, helping you avoid the shortcomings of JavaScript.

  15. Developing context sensitive BIM based applications

    NARCIS (Netherlands)

    Hartmann, Timo; Underwood, J.; Isikdag, U.

    2010-01-01

    Current Building Information Model (BIM) based applications do not integrate well with the varying and frequently changing work processes of Architectural, Engineering, and Construction (AEC) professionals. One cause for this problem is that traditionally software developers apply software design

  16. Application of minimally invasive pancreatic surgery: an Italian survey.

    Science.gov (United States)

    Capretti, Giovanni; Boggi, Ugo; Salvia, Roberto; Belli, Giulio; Coppola, Roberto; Falconi, Massimo; Valeri, Andrea; Zerbi, Alessandro

    2018-05-16

    The value of minimally invasive pancreatic surgery (MIPS) is still debated. To assess the diffusion of MIPS in Italy and identify the barriers preventing wider implementation, a questionnaire was developed under the auspices of three Scientific Societies (AISP, It-IHPBA, SICE) and was sent to the largest possible number of Italian surgeons also using the mailing list of the two main Italian Surgical Societies (SIC and ACOI). The questionnaire consisted of 25 questions assessing: centre characteristics, facilities and technologies, type of MIPS performed, surgical techniques employed and opinions on the present and future value of MIPS. Only one reply per unit was considered. Fifty-five units answered the questionnaire. While 54 units (98.2%) declared to perform MIPS, the majority of responders were not dedicated to pancreatic surgery. Twenty-five units (45.5%) performed MIPS per year. Forty-nine units (89.1%) performed at least one minimally invasive (MI) distal pancreatectomy (DP), and 10 (18.2%) at least one MI pancreatoduodenectomy (PD). Robotic assistance was used in 18 units (31.7%) (14 DP, 7 PD). The major constraints limiting the diffusion of MIPS were the intrinsic difficulty of the technique and the lack of specific training. The overall value of MIPS was highly rated. Our survey illustrates the current diffusion of MIPS in Italy and underlines the great interest for this approach. Further diffusion of MIPS requires the implementation of standardized protocols of training. Creation of a prospective National Registry should also be considered.

  17. Maintenance-Ready Web Application Development

    Directory of Open Access Journals (Sweden)

    Ion IVAN

    2016-01-01

    Full Text Available The current paper tackles the subject of developing maintenance-ready web applications. Maintenance is presented as a core stage in a web application’s lifecycle. The concept of maintenance-ready is defined in the context of web application development. Web application maintenance tasks types are enunciated and suitable task types are identified for further analysis. The research hypothesis is formulated based on a direct link between tackling maintenance in the development stage and reducing overall maintenance costs. A live maintenance-ready web application is presented and maintenance related aspects are highlighted. The web application’s features, that render it maintenance-ready, are emphasize. The cost of designing and building the web-application to be maintenance-ready are disclosed. The savings in maintenance development effort facilitated by maintenance ready features are also disclosed. Maintenance data is collected from 40 projects implemented by a web development company. Homogeneity and diversity of collected data is evaluated. A data sample is presented and the size and comprehensive nature of the entire dataset is depicted. Research hypothesis are validated and conclusions are formulated on the topic of developing maintenance-ready web applications. The limits of the research process which represented the basis for the current paper are enunciated. Future research topics are submitted for debate.

  18. National survey report on PV power applications in Switzerland 2006

    Energy Technology Data Exchange (ETDEWEB)

    Huesser, P. [Nova Energie GmbH, Aarau (Switzerland); Hostettler, T. [Ingenieurbuero Hostettler, Berne (Switzerland)

    2007-07-01

    This annual report was published by the Swiss Federal Office of Energy (SFOE) as part of the International Energy Agency's work on the exchange and dissemination of information on photovoltaic power systems (PVPS). The political situation in Switzerland with regard to the promotion of photovoltaics (PV) and new legislation in the energy area is discussed. The report provides information on installed PV power, costs and prices and the Swiss PV industry. Examples of PV applications are presented and data on the cumulative installed PV power in various application sectors is presented and discussed. Highlights, major projects and various demonstration and field-test programmes are dealt with, as are public budgets for market stimulation. Figures on the development, production and prices of PV cells and modules are presented. Swiss balance-of-system products are reviewed, as are PV-related services and the value of the Swiss PV business. A review of non-technical factors and new initiatives completes the report.

  19. Developing web applications with Oracle ADF essentials

    CERN Document Server

    Vesterli, Sten E

    2013-01-01

    Developing Web Applications with Oracle ADF Essentials covers the basics of Oracle ADF and then works through more complex topics such as debugging and logging features and JAAS Security in JDeveloper as the reader gains more skills. This book will follow a tutorial approach, using a practical example, with the content and tasks getting harder throughout.""Developing Web Applications with Oracle ADF Essentials"" is for you if you want to build modern, user-friendly web applications for all kinds of data gathering, analysis, and presentations. You do not need to know any advanced HTML or JavaSc

  20. Application of GPS in a high precision engineering survey network

    International Nuclear Information System (INIS)

    Ruland, R.; Leick, A.

    1985-04-01

    A GPS satellite survey was carried out with the Macrometer to support construction at the Stanford Linear Accelerator Center (SLAC). The network consists of 16 stations of which 9 stations were part of the Macrometer network. The horizontal and vertical accuracy of the GPS survey is estimated to be 1 to 2 mm and 2 to 3 mm respectively. The horizontal accuracy of the terrestrial survey, consisting of angles and distances, equals that of the GPS survey only in the ''loop'' portion of the network. All stations are part of a precise level network. The ellipsoidal heights obtained from the GPS survey and the orthometric heights of the level network are used to compute geoid undulations. A geoid profile along the linac was computed by the National Geodetic Survey in 1963. This profile agreed with the observed geoid within the standard deviation of the GPS survey. Angles and distances were adjusted together (TERRA), and all terrestrial observations were combined with the GPS vector observations in a combination adjustment (COMB). A comparison of COMB and TERRA revealed systematic errors in the terrestrial solution. A scale factor of 1.5 ppM +- .8 ppM was estimated. This value is of the same magnitude as the over-all horizontal accuracy of both networks. 10 refs., 3 figs., 5 tabs

  1. Uses of Youth Risk Behavior Survey and School Health Profiles Data: Applications for Improving Adolescent and School Health

    Science.gov (United States)

    Foti, Kathryn; Balaji, Alexandra; Shanklin, Shari

    2011-01-01

    Background: To monitor priority health risk behaviors and school health policies and practices, respectively, the Centers for Disease Control and Prevention (CDC) developed the Youth Risk Behavior Surveillance System (YRBSS) and the School Health Profiles (Profiles). CDC is often asked about the use and application of these survey data to improve…

  2. Developing and Optimizing Applications in Hadoop

    Science.gov (United States)

    Kothuri, P.; Garcia, D.; Hermans, J.

    2017-10-01

    This contribution is about sharing our recent experiences of building Hadoop based application. Hadoop ecosystem now offers myriad of tools which can overwhelm new users, yet there are successful ways these tools can be leveraged to solve problems. We look at factors to consider when using Hadoop to model and store data, best practices for moving data in and out of the system and common processing patterns, at each stage relating with the real world experience gained while developing such application. We share many of the design choices, tools developed and how to profile a distributed application which can be applied for other scenarios as well. In conclusion, the goal of the presentation is to provide guidance to architect Hadoop based application and share some of the reusable components developed in this process.

  3. Bioinspired Intelligent Algorithm and Its Applications for Mobile Robot Control: A Survey

    Directory of Open Access Journals (Sweden)

    Jianjun Ni

    2016-01-01

    Full Text Available Bioinspired intelligent algorithm (BIA is a kind of intelligent computing method, which is with a more lifelike biological working mechanism than other types. BIAs have made significant progress in both understanding of the neuroscience and biological systems and applying to various fields. Mobile robot control is one of the main application fields of BIAs which has attracted more and more attention, because mobile robots can be used widely and general artificial intelligent algorithms meet a development bottleneck in this field, such as complex computing and the dependence on high-precision sensors. This paper presents a survey of recent research in BIAs, which focuses on the research in the realization of various BIAs based on different working mechanisms and the applications for mobile robot control, to help in understanding BIAs comprehensively and clearly. The survey has four primary parts: a classification of BIAs from the biomimetic mechanism, a summary of several typical BIAs from different levels, an overview of current applications of BIAs in mobile robot control, and a description of some possible future directions for research.

  4. Bioinspired Intelligent Algorithm and Its Applications for Mobile Robot Control: A Survey.

    Science.gov (United States)

    Ni, Jianjun; Wu, Liuying; Fan, Xinnan; Yang, Simon X

    2016-01-01

    Bioinspired intelligent algorithm (BIA) is a kind of intelligent computing method, which is with a more lifelike biological working mechanism than other types. BIAs have made significant progress in both understanding of the neuroscience and biological systems and applying to various fields. Mobile robot control is one of the main application fields of BIAs which has attracted more and more attention, because mobile robots can be used widely and general artificial intelligent algorithms meet a development bottleneck in this field, such as complex computing and the dependence on high-precision sensors. This paper presents a survey of recent research in BIAs, which focuses on the research in the realization of various BIAs based on different working mechanisms and the applications for mobile robot control, to help in understanding BIAs comprehensively and clearly. The survey has four primary parts: a classification of BIAs from the biomimetic mechanism, a summary of several typical BIAs from different levels, an overview of current applications of BIAs in mobile robot control, and a description of some possible future directions for research.

  5. Bioinspired Intelligent Algorithm and Its Applications for Mobile Robot Control: A Survey

    Science.gov (United States)

    Ni, Jianjun; Wu, Liuying; Fan, Xinnan; Yang, Simon X.

    2016-01-01

    Bioinspired intelligent algorithm (BIA) is a kind of intelligent computing method, which is with a more lifelike biological working mechanism than other types. BIAs have made significant progress in both understanding of the neuroscience and biological systems and applying to various fields. Mobile robot control is one of the main application fields of BIAs which has attracted more and more attention, because mobile robots can be used widely and general artificial intelligent algorithms meet a development bottleneck in this field, such as complex computing and the dependence on high-precision sensors. This paper presents a survey of recent research in BIAs, which focuses on the research in the realization of various BIAs based on different working mechanisms and the applications for mobile robot control, to help in understanding BIAs comprehensively and clearly. The survey has four primary parts: a classification of BIAs from the biomimetic mechanism, a summary of several typical BIAs from different levels, an overview of current applications of BIAs in mobile robot control, and a description of some possible future directions for research. PMID:26819582

  6. Development and Validation of a Novice Teacher and Supervisor Survey

    Science.gov (United States)

    Finster, Matthew

    2017-01-01

    This brief presents initial evidence about the reliability and validity of a novice teacher survey and a novice teacher supervisor survey. The novice teacher and novice teacher supervisor surveys assess how well prepared novice teachers are to meet the job requirements of teaching. The surveys are designed to provide educator preparation programs…

  7. Windows Phone 8 application development essentials

    CERN Document Server

    Szostak, Tomasz

    2013-01-01

    A mini-tutorial full of code examples and strategies to give you plenty of options when building your own applications for Windows Phone 8.This book is ideal if you are a developers who wants to get into mobile development. Some C# background may be useful for a complete understanding.

  8. Mastering web application development with Express

    CERN Document Server

    Vlăduțu, Alexandru

    2014-01-01

    If you are a Node.js developer who wants to take your Express skills to the next level and develop high performing, reliable web applications using best practices, this book is ideal for you. The only prerequisite is knowledge of Node.js.

  9. Agile Enterprise Application Development with Flex

    CERN Document Server

    Team, The

    2008-01-01

    This Short Cut takes a look at a set of tools and technologies that work together to allow developers to build Rich Internet Applications (RIAs) quickly and easily on top of proven enterprise technologies that are traditionally associated with long, complex development efforts.

  10. Professional NFC application development for Android

    CERN Document Server

    Coskun, Vedat; Ozdenizci, Busra

    2013-01-01

    A practical guide to developing and deploying Near Field Communication (NFC) applications There has been little practical guidance available on NFC programming, until now. If you're a programmer or developer, get this unique and detailed book and start creating apps for this exciting technology. NFC enables contactless mobile communication between two NFC-compatible devices. It's what allows customers to pay for purchases by swiping their smartphones with Google Wallet, for example. This book shows you how to develop NFC applications for Android, for all NFC operating modes: reader

  11. HTML5 iPhone application development

    CERN Document Server

    Crespo, Alvin

    2013-01-01

    Presented in an easy to follow, step by step tutorial format, this is your guide to web application development for the iOS Safari.This book was meant for you! From the beginner developer to chief technology officer, this book aims to make you an expert in the field of web application development for iOS Safari. Familiarity with HTML, CSS and JavaScript are greatly encouraged but if you're looking to dive right in and find solutions to everyday problems and more, then this book is for you.

  12. GNOME 3 application development beginner's guide

    CERN Document Server

    Anwari, Mohammad

    2013-01-01

    This book is a step-by-step guide with ready-to-run codes to guide you in developing applications with GNOME. If you have programming skill either in Linux or other operating systems and want to have GNOME 3 as one of your deployment targets, then this book is for you. This book is also for commercial software developers or an open source software hacker. The reader needs to be familiar with Vala and JavaScript before starting to develop Gtk+ and Clutter applications.

  13. Towards New Web Application Development Practices

    Directory of Open Access Journals (Sweden)

    Angeliki Poulymenakou

    1998-11-01

    Full Text Available Electronic Commerce over the Internet, aims to become a global conveyor belt of business transactions. Web applications of increasing sophistication emerge in almost every business sector, reflecting a variety of technical and technological approaches. In this paper we argue that system developers need to reconsider their professional practices in the context of these new technologies by taking advantage of opportunities like short response cycles and easy diffusion of systems results, while they recognise the limitations of traditional practice. We discuss a framework of IS development issues for Internet based applications and propose guidelines towards new development practices.

  14. An Application Development Platform for Neuromorphic Computing

    Energy Technology Data Exchange (ETDEWEB)

    Dean, Mark [University of Tennessee (UT); Chan, Jason [University of Tennessee (UT); Daffron, Christopher [University of Tennessee (UT); Disney, Adam [University of Tennessee (UT); Reynolds, John [University of Tennessee (UT); Rose, Garrett [University of Tennessee (UT); Plank, James [University of Tennessee (UT); Birdwell, John Douglas [University of Tennessee (UT); Schuman, Catherine D [ORNL

    2016-01-01

    Dynamic Adaptive Neural Network Arrays (DANNAs) are neuromorphic computing systems developed as a hardware based approach to the implementation of neural networks. They feature highly adaptive and programmable structural elements, which model arti cial neural networks with spiking behavior. We design them to solve problems using evolutionary optimization. In this paper, we highlight the current hardware and software implementations of DANNA, including their features, functionalities and performance. We then describe the development of an Application Development Platform (ADP) to support efficient application implementation and testing of DANNA based solutions. We conclude with future directions.

  15. Beginning iPad Application Development

    CERN Document Server

    Lee, Wei-Meng

    2010-01-01

    A hands-on approach to iPad application development. Beginning iPad Application Development is written to help jumpstart beginning iPad developers. It covers the various topics in such a manner that you will progressively learn without being overwhelmed by the details. It adopts the philosophy that the best way to learn is by doing, hence the numerous Try It Out sections in all the chapters, which first show you how to build something and then explain how things work. Although iPad programming is a huge topic, the aim for this book is to get you started with the fundamentals, and help you unde

  16. Development of Knowledge Intensive Applications for Hospital

    Science.gov (United States)

    Kim, Jongho; Hong, Han-Kuk; Jang, Gil-Sang; Kim, Joung Yeon; Kim, Taehun

    Most studies of medical intelligence system have focused on the development of backend data repositories rather than frontend user applications. Also, they tend to lack systematic development models which demonstrate how user requirements inform system design and implementation. For these reasons, it is highly desirable to show the process of eliciting knowledge requirements in addition to the development process for knowledge-intensive applications. This research covers the implementation of a medical intelligence system based on analysis of knowledge requirements such as OLAP (On-line Analytical Processing) fundamental functionalities and knowledge types. The proposed medical intelligence system provides health care providers and their supporters with the ability to draw meaningful insights from very large, complex data sets. A real life case is presented to illustrate the system’s practical usage. Six application packages are defined, namely: explorer, analyzer, reporter, statistician, visualizer, and meta administrator. Finally, the study concludes with an evaluation of the developed system and future research directions.

  17. Report on technological trend survey in fiscal 2000. Survey on bio-technology development strategy; 2000 nendo gijutsu doko nado chosa hokokusho. Bio technology gijutsu kaihatsu senryaku chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Survey and research have been performed on bio-technologies as to their seeds of technological development projects to be worked on by the government from the viewpoint of industrial utilization technologies. In the survey on the trends of research and development and technological development on human-genomes, the survey has been done on the status of execution in the Millennium Genome Project, and how the works related to human-genomes are done at the bio-related government based research organizations and the private sector research organizations. Trends related to the human-genome research in overseas countries were also surveyed. With regard to the future prospect of research and development in the post genome age, discussions were given on the result of the questionnaire survey on opinion leaders in the industrial, governmental and academic areas. In discussing the viewpoint of the industrial utilization technologies related to human genomes, candidates assumed usable in the genome related application fields were discussed, and a basic framework of a technological map was prepared. Based on the results thereof, the technological development areas anticipated to be important in the future were extracted, and the technological development themes were discussed. (NEDO)

  18. Goal Planning and Pursuit: Mobile Application Development and Evaluation

    Science.gov (United States)

    2016-08-01

    Applications , Self-Directed Learning, Army Learning Model 16. SECURITY ... application . The application was developed in both iOS (iPhone) and Android versions. This application , entitled Army Achieve, consisted of five key steps... applications were developed to function equivalently in both iPhone and Android versions. Application Development Process The application

  19. Use and utility of Web-based residency program information: a survey of residency applicants.

    Science.gov (United States)

    Embi, Peter J; Desai, Sima; Cooney, Thomas G

    2003-01-01

    The Internet has become essential to the residency application process. In recent years, applicants and residency programs have used the Internet-based tools of the National Residency Matching Program (NRMP, the Match) and the Electronic Residency Application Service (ERAS) to process and manage application and Match information. In addition, many residency programs have moved their recruitment information from printed brochures to Web sites. Despite this change, little is known about how applicants use residency program Web sites and what constitutes optimal residency Web site content, information that is critical to developing and maintaining such sites. To study the use and perceived utility of Web-based residency program information by surveying applicants to an internal medicine program. Our sample population was the applicants to the Oregon Health & Science University Internal Medicine Residency Program who were invited for an interview. We solicited participation using the group e-mail feature available through the Electronic Residency Application Service Post-Office application. To minimize the possibility for biased responses, the study was confined to the period between submission of National Residency Matching Program rank-order lists and release of Match results. Applicants could respond using an anonymous Web-based form or by reply to the e-mail solicitation. We tabulated responses, calculated percentages for each, and performed a qualitative analysis of comments. Of the 431 potential participants, 218 responded (51%) during the study period. Ninety-nine percent reported comfort browsing the Web; 52% accessed the Web primarily from home. Sixty-nine percent learned about residency Web sites primarily from residency-specific directories while 19% relied on general directories. Eighty percent found these sites helpful when deciding where to apply, 69% when deciding where to interview, and 36% when deciding how to rank order programs for the Match. Forty

  20. Solar Photovoltaic Electricity Applications in France. National Survey Report 2007

    International Nuclear Information System (INIS)

    Claverie, Andre; Jacquin, Philippe

    2008-01-01

    The overall power of installed PV systems in France in 2007 was 31,3 MW which represents a significant growth compared to 2006. This increase is mainly due to the national fiscal measures (new feed-in tariff and tax credit) launched in 2006. The implemented feed-in tariff model application supports building integration of photovoltaic generators with a much higher financial incentive than other type of photovoltaic installations. In the same way, local authorities like regional councils and departmental councils developed new policies to promote photovoltaics through specific grants. As the building integration of photovoltaic generators is encouraged by a feed-in tariff bonus, innovative products are appearing on the market or are under development. In parallel, actors like architects, designers, engineers are now paying attention to building integration of photovoltaic components (BIPV). New actors such as financial institutions, energy operators, and private investors have developed ambitious projects. With the increase of the market, new firms have been created including engineering, consultancies, electricity producers, PV products distributors and retailers, installation and maintenance companies. Photovoltaic industrial sector is getting stronger and large investments have been undertaken in order to develop a vertical integration of the photovoltaic value chain, from feedstock silicon production to final photovoltaic products. A new private-public consortium called 'PV Alliance Lab Fab' has been set up and an important R and D project under the name of 'Solar Nano Crystal' should start by the end of 2008. At the same time, R and D activities focus on photovoltaic silicon cells/modules conversion efficiency and long term reliability, production costs, new materials and device design, yield, environmental impact of industrial processes and optimisation of control and monitoring of photovoltaic systems. In addition to the ADEME and ANR

  1. [Literature survey on botanical origin and clinical application of traditional Tibetan medicine "Shengdeng"].

    Science.gov (United States)

    Chen, De-Dao; Meng, Xian-Hua; Zhang, Ying-Shan; Chen, Gen-Ping; Huang, Yu-Lan

    2012-10-01

    "Shengdeng" is its Tibetan transliteration referring to many medicines. Tibetan doctors and pharmacists in different areas use different drugs in formulation and clinical application, which are easily confused. In order to grasp the formula and clinical application accurately, we conduct a literature survey on history and current state of botanical origin and clinical application of "Shengdeng", making clear the application of various herbs named "Shengdeng" and providing reference to all Tibetan researchers and clinical workers in formulation and clinical application.

  2. Guide to the design and application of online questionnaire surveys.

    Science.gov (United States)

    Regmi, Pramod R; Waithaka, Elizabeth; Paudyal, Anjana; Simkhada, Padam; van Teijlingen, Edwin

    2016-12-01

    Collecting research data through traditional approaches (face-to-face, postal or telephone survey) can be costly and time consuming. The emerging data collection approach based on internet/e-based technologies (e.g. online platforms and email), is a relatively cost effective survey alternative. These novel data collection strategies can collect large amounts of data from participants in a short time frame. Similarly, they also seem to be feasible and effective in collecting data on sensitive issues or with samples they are generally hard to reach, for example, men who have sex with men (MSM) or migrants. As a significant proportion of the population currently in the world are digitally connected, the shift from postal (paper-pencil) or telephone towards online survey use in research is in the interests of researchers in academia as well as in the commercial world. However, compared to designing and executing paper version of the questionnaire, there is limited literature to help a starting researcher with the design and a use of online questionnaires. This short paper highlights issues around: a) methodological aspect of online questionnaire survey; b) online survey planning and management; and c) ethical concerns that may arise while using this option. We believe that this paper will be useful for researchers who want to gain knowledge or apply this approach in their research.

  3. End User Development Toolkit for Developing Physical User Interface Applications

    OpenAIRE

    Abrahamsen, Daniel T; Palfi, Anders; Svendsen, Haakon Sønsteby

    2014-01-01

    BACKGROUND: Tangible user interfaces and end user development are two increasingresearch areas in software technology. Physical representation promoteopportunities to ease the use of technology and reinforce personality traits ascreativeness, collaboration and intuitive actions. However, designing tangibleuser interfaces are both cumbersome and require several layers of architecture.End user development allows users with no programming experience to createor customize their own applications. ...

  4. Standardization of Software Application Development and Governance

    Science.gov (United States)

    2015-03-01

    of their systems or applications. DOD systems do not have the luxury of replacing systems at the same pace as commercial companies. DOD has to...is not that the commercial market purposefully sells products that are not complete, but having a 100% complete product requires extensive testing...develop applications for Google ’s Android and Apple ’s iOS devices. Both these companies have SDKs online as well as a number of resources available

  5. Development of an application simulating radioactive sources

    International Nuclear Information System (INIS)

    Riffault, V.; Locoge, N.; Leblanc, E.; Vermeulen, M.

    2011-01-01

    This paper presents an application simulating radioactive gamma sources developed in the 'Ecole des Mines' of Douai (France). It generates raw counting data as an XML file which can then be statistically exploited to illustrate the various concepts of radioactivity (exponential decay law, isotropy of the radiation, attenuation of radiation in matter). The application, with a spread sheet for data analysis and lab procedures, has been released under free license. (authors)

  6. Integrity of the National Resident Matching Program for Radiation Oncology: National Survey of Applicant Experiences

    Energy Technology Data Exchange (ETDEWEB)

    Holliday, Emma B. [Division of Radiation Oncology, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Thomas, Charles R., E-mail: thomasch@ohsu.edu [Department of Radiation Medicine, OHSU Knight Cancer Institute, Oregon Health and Science University, Portland, Oregon (United States); Kusano, Aaron S. [Department of Radiation Oncology, University of Washington Medical Center, Seattle, Washington (United States)

    2015-07-01

    Purpose: The aim of this study was to examine the experiences of radiation oncology applicants and to evaluate the prevalence of behaviors that may be in conflict with established ethical standards. Methods and Materials: An anonymous survey was sent to all 2013 applicants to a single domestic radiation oncology residency program through the National Resident Matching Program (NRMP). Questions included demographics, survey of observed behaviors, and opinions regarding the interview and matching process. Descriptive statistics were presented. Characteristics and experiences of respondents who matched were compared with those who did not match. Results: Questionnaires were returned by 87 of 171 applicants for a 51% response rate. Eighty-two questionnaires were complete and included for analysis. Seventy-eight respondents (95.1%) reported being asked at least 1 question in conflict with the NRMP code of conduct. When asked where else they were interviewing, 64% stated that this query made them uncomfortable. Forty-five respondents (54.9%) reported unsolicited post-interview contact by programs, and 31 (37.8%) felt pressured to give assurances. Fifteen respondents (18.3%) reported being told their rank position or that they were “ranked to match” prior to Match day, with 27% of those individuals indicating this information influenced how they ranked programs. Half of respondents felt applicants often made dishonest or misleading assurances, one-third reported that they believed their desired match outcome could be improved by deliberately misleading programs, and more than two-thirds felt their rank position could be improved by having faculty from their home institutions directly contact programs on their behalf. Conclusions: Radiation oncology applicants report a high prevalence of behaviors in conflict with written NRMP policies. Post-interview communication should be discouraged in order to enhance fairness and support the professional development of future

  7. Integrity of the National Resident Matching Program for Radiation Oncology: National Survey of Applicant Experiences

    International Nuclear Information System (INIS)

    Holliday, Emma B.; Thomas, Charles R.; Kusano, Aaron S.

    2015-01-01

    Purpose: The aim of this study was to examine the experiences of radiation oncology applicants and to evaluate the prevalence of behaviors that may be in conflict with established ethical standards. Methods and Materials: An anonymous survey was sent to all 2013 applicants to a single domestic radiation oncology residency program through the National Resident Matching Program (NRMP). Questions included demographics, survey of observed behaviors, and opinions regarding the interview and matching process. Descriptive statistics were presented. Characteristics and experiences of respondents who matched were compared with those who did not match. Results: Questionnaires were returned by 87 of 171 applicants for a 51% response rate. Eighty-two questionnaires were complete and included for analysis. Seventy-eight respondents (95.1%) reported being asked at least 1 question in conflict with the NRMP code of conduct. When asked where else they were interviewing, 64% stated that this query made them uncomfortable. Forty-five respondents (54.9%) reported unsolicited post-interview contact by programs, and 31 (37.8%) felt pressured to give assurances. Fifteen respondents (18.3%) reported being told their rank position or that they were “ranked to match” prior to Match day, with 27% of those individuals indicating this information influenced how they ranked programs. Half of respondents felt applicants often made dishonest or misleading assurances, one-third reported that they believed their desired match outcome could be improved by deliberately misleading programs, and more than two-thirds felt their rank position could be improved by having faculty from their home institutions directly contact programs on their behalf. Conclusions: Radiation oncology applicants report a high prevalence of behaviors in conflict with written NRMP policies. Post-interview communication should be discouraged in order to enhance fairness and support the professional development of future

  8. Grant Application Development, Submission, Review, & Award

    Science.gov (United States)

    This infographic shows the National Cancer Institute general timeline progression through Grant Application Development, Submission, Review, and Award Infographic. In the first month, Applicant prepares and submits Grant Application to Grants.gov in response to FOA. In month two, The Center for Scientific Review (CSR) assigns applications that fall under the category of R01s, etc. to a Scientific Review Group (SRG) or the CSR assigns applications that fall under the category of Program Projects and Center Grants to NCI Division of Extramural Activities (DEA). Months four through five: First-level review by Scientific Review Group (SRG) for Scientific Merit: SRG assigns Impact Scores. Month five Summary Sstatements are prepared and are available to NCI Program staff and applicants. Month six, second-level review by National Cancer Advisory board (NCAB) for NCI Funding determination begins. NCAB makes recommendation to NCI Director, NCI develops funding plan, Applications selected for Funding, “Paylists” forwarded to Office of Grant Administration (OGA). Month ten, Award Negotiations and Issuance: Award issued, Award received by Institution, and Investigator begins work. www.cancer.gov Icons made by Freepik from http://www.flaticon.com is licensed by CC BY3.0

  9. New Sunshine Program for fiscal 2000. Development of photovoltaic power system commercialization technology (Development of ultrahigh-efficiency crystalline compound solar cell manufacturing technology - Surveys and studies of peripheral key technologies/Surveys of ultrahigh-efficiency solar cell application fields); 2000 nendo New sunshine keikaku seika hokokusho. Taiyoko hatsuden system jitsuyoka gijutsu kaihatsu - Chokokoritsu kessho kagobutsu taiyo denchi no seizo gijutsu kaihatsu, Shuhen yoso gijutsu ni kansuru chosa kenkyu (Chokokoritsu taiyo denchi tou oyo bunya kaitaku chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Surveys and studies were conducted in order to make propositions concerning the fields of application wherein the merits of ultrahigh-efficiency solar cells would be fully utilized. A questionnaire was held about solar cell application fields, and studies were made about new systems based on the need in the market for specific solar cell goods and capable of supporting their mass diffusion. Proposed as the result was the establishment of a rental (lease) system for photovoltaic power systems, a local photovoltaics advisory system, a market for used photovoltaic power systems, and so forth. In the feasibility study of photovoltaic power generation on unused land in agricultural villages, surveys were conducted concerning energy problems, the energy structure, the actual state of energy consumption, the abandoned farm and its utilization, and so forth. Propositions involving photovoltaic power feasibility were then made, which covered power consumption for greenhouse culture, energy supply for producing methanol out of biomass, power sources for insect incapacitating yellow fluorescent lamps, power sources for livestock barn air-conditioning, power sources for animal excretion treatment, and so forth. (NEDO)

  10. Exploration of Global Trend on Biomedical Application of Polyhydroxyalkanoate (PHA): A Patent Survey.

    Science.gov (United States)

    Ponnaiah, Paulraj; Vnoothenei, Nagiah; Chandramohan, Muruganandham; Thevarkattil, Mohamed Javad Pazhayakath

    2018-01-30

    Polyhydroxyalkanoates are bio-based, biodegradable naturally occurring polymers produced by a wide range of organisms, from bacteria to higher mammals. The properties and biocompatibility of PHA make it possible for a wide spectrum of applications. In this context, we analyze the potential applications of PHA in biomedical science by exploring the global trend through the patent survey. The survey suggests that PHA is an attractive candidate in such a way that their applications are widely distributed in the medical industry, drug delivery system, dental material, tissue engineering, packaging material as well as other useful products. In our present study, we explored patents associated with various biomedical applications of polyhydroxyalkanoates. Patent databases of European Patent Office, United States Patent and Trademark Office and World Intellectual Property Organization were mined. We developed an intensive exploration approach to eliminate overlapping patents and sort out significant patents. We demarcated the keywords and search criterions and established search patterns for the database request. We retrieved documents within the recent 6 years, 2010 to 2016 and sort out the collected data stepwise to gather the most appropriate documents in patent families for further scrutiny. By this approach, we retrieved 23,368 patent documents from all the three databases and the patent titles were further analyzed for the relevance of polyhydroxyalkanoates in biomedical applications. This ensued in the documentation of approximately 226 significant patents associated with biomedical applications of polyhydroxyalkanoates and the information was classified into six major groups. Polyhydroxyalkanoates has been patented in such a way that their applications are widely distributed in the medical industry, drug delivery system, dental material, tissue engineering, packaging material as well as other useful products. There are many avenues through which PHA & PHB could be

  11. iPhone Application Development For Dummies

    CERN Document Server

    Goldstein, Neal

    2009-01-01

    Here's the fun and easy way to learn how to create your own iPhone applications. Whether you're a professional developer or an iPhone user with a knack for technology, this plain English guide shows you how easy it can be to create your own cool iPhone and iPod touch apps. The open iPhone SDK offers a world of opportunities, and with the information in iPhone Application Development For Dummies , you can get in on the fun and profit. You don't need high-level programming skills to create iPhone apps. iPhone Application Development For Dummies walks you through the fundamentals for building a v

  12. Developing the Medication Reminder Mobile Application "Seeb".

    Science.gov (United States)

    Saghaeiannejad-Isfahani, Sakineh; Ehteshami, Asghar; Savari, Ebtesam; Samimi, Ali

    2017-06-01

    Today, the structure of comprehensive health care emphasizes self-care more than therapy. Medication therapy is a strong instrument for therapy received through the health setting, especially in medication area. Error in medication administration has produced different problems and they cost billions of dollars every year. Regarding mobile phone extensions, we developed a local medication reminder mobile application called "Seeb" as a suitable solution for decreasing medication errors for Iranians. We conducted a mixed methods study in three Phases: 1) Comparative study of existing mobile applications; 2) developed its object-oriented model; 3) Developed the initial version of "Seeb" that was approved for production. This application was designed for the appropriate medication administration including time and dosages through: recording patient and medication data; scheduling patients' medication; and reporting medication administration on progress. "Seeb" has been designed in compliance with Iranian health information technologists and pharmacists requirements. It is expected to reduce medication error and improve patient adherence to medical prescriptions.

  13. Development of a Miniaturized and Portable Methane Analyzer for Natural Gas Leak Walking Surveys

    Science.gov (United States)

    Huang, Y. W.; Leen, J. B.; Gupta, M.; Baer, D. S.

    2016-12-01

    Traditional natural gas leak walking surveys have been conducted with devices that are based on technologies such as flame ionization detector (FID), IR-based spectrometer and IR camera. The sensitivity is typically on the ppm level. The low sensitivity means the device cannot pick up leaks far from it, and more time is spent surveying the area before pinpointing the leak location. A miniaturized methane analyzer has been developed to significantly improve the sensitivity of the device used in walking surveys to detect natural gas leaks at greater distance. ABB/LGR's patented Off-Axis Integrated Cavity Output Spectroscopy (OA-ICOS) is utilized to offer rugged and highly sensitive methane detection in a portable package. The miniaturized package weighs 13.5 lb, with a 4-hour rechargeable battery inside. The precision of the analyzer for methane is 2 ppb at 1 second. The analyzer operates at 10 Hz and its flow response time is 3 seconds for measurements through a 1-meter long sampling wand to registering on the data stream. The data can be viewed in real-time on a tablet or a smartphone. The compact and simplified package of the methane analyzer allows for more efficient walking surveys. It also allows for other applications that require low-power, low-weight and a portable package. We present data from walking surveys to demonstrate its ability to detect methane leaks.

  14. A framework for developing remote sensing applications

    International Nuclear Information System (INIS)

    Ahmad, T.; Hayat, M.F.; Afzal, M.; Asif, H.M.S.; Asif, K.H.

    2014-01-01

    Remote Sensing Application (RSA) is important as one of the critical enabler of e-systems such as e- governments, e-commerce, and e-sciences. In this study, we argued that owning to the specialized needs of RSA such as volatility and interactive nature, a customized Software Engineering (SE) approach should be adapted for their development. Based on this argument we have also identified the shortcomings of the conventional SE approaches and the classical waterfall software development life cycle model. In this study, we have proposed a modification to the classical waterfall software development life cycle model for proposing a customized software development Framework for RSAs. We have identified four (4) different types of changes that can occur to an already developed RS application. The proposed framework was capable to incorporate all four types of changes. Remote Sensing, software engineering, functional requirements, types of changes. (author)

  15. New journal selection for quantitative survey of infectious disease research: application for Asian trend analysis

    Directory of Open Access Journals (Sweden)

    Okabe Nobuhiko

    2009-10-01

    Taiwan were the most productive. Conclusion A survey of 100 selected journals is more sensitive than the SCI Infectious Disease Category from the viewpoint of avoiding underestimating the number of infectious disease research articles of Asian origin. The survey method is applicable to grasp global trends in disease research, although the method may require further development.

  16. Development application guidelines : Newfoundland offshore area

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-12-01

    The Canada-Newfoundland Offshore Petroleum Board has created a set of guidelines which describe the information needed by the Board to process a development application by a proponent of an offshore hydrocarbon development project. The guidelines also describe the review process that will be followed in considering a proponent`s application. Proponents must also refer to the Canada-Newfoundland Atlantic Accord Implementation Act and the Canada-Newfoundland Atlantic Accord Implementation (Newfoundland) Act. These guidelines also describe the requirements for the Canada-Newfoundland benefits plan, the environmental impact statement, the socio-economic impact statement, the safety plan, and the environmental protection plan.

  17. Facebook Application Development with Graph API Cookbook

    CERN Document Server

    Srivastava, Shashwat

    2011-01-01

    Written in a cookbook style, this book offers solutions using a recipe-based approach. Each recipe contains step-by-step instructions followed by an analysis of what was done in each task and other useful information. The cookbook approach means you can dive into whatever recipes you want in no particular order. The book provides tips and tricks to the most common problems and scenarios faced in Facebook Application Development. This book is written for Facebook developers ranging from novice to expert. It uses PHP, HTML and jQuery, the most commonly used platforms, to build applications in Fa

  18. Android Tablet Application Development For Dummies

    CERN Document Server

    Felker, Donn

    2011-01-01

    Get up to speed on the hottest opportunity in the application development arena App development for tablets is a booming business. Android tablets, including the popular Motorola Xoom, are gaining market share at breakneck speed, and this book can have even novice programmers creating great Android apps specifically for tablets quickly and easily. A little Java knowledge is helpful but not essential to get started creating apps. Android expert Donn Felker helps you get the Android environment up and running, use XML to create application menus, create an icon for your app, and submit your app

  19. THE APPLICATION OF SURVEY IN ER WANG TEMPLE RESTITUTING

    Directory of Open Access Journals (Sweden)

    W. Shuai

    2013-07-01

    Full Text Available Er Wang Temple, in World Heritage Site "Dujiang Weirs and Qingchengshan Mountai", was severely destroyed in Wenchuan earthquake of May 2008. There are several problems at different level in every building, such as structural distortion, foundation displacement, wall fracture, roof damage, etc. The stage was completely collapsed in the earthquake. Tableland the stage situated had a huge crack and slope collapse. This article is for the stage renovation. The survey of damage in earthquake is the basis of Er Wang Temple restituting. Survey including field survey after the earthquake and the measurement and investigation for the remained construction member of the main wood structure. For field survey, the basis of pillars which had not have significantly affects in earthquake could be seem as the reference points for measurement. The investigation of remained main wood construction member, especially the size of the key structures and site and manufacture method of the joints, is the important basis for recovery stage. Our team did our utmost to restore the original appearance of stage in design, materials and craft by various tools, which include measured drawings in different times, old images collection, fine measuring by 3D laser scan, measurement of leftover pieces, logical inference.

  20. Lateral Violence in Nursing Survey: Instrument Development and Validation

    Directory of Open Access Journals (Sweden)

    Lynne S. Nemeth

    2017-07-01

    Full Text Available An examination of the psychometric properties of the Lateral Violence in Nursing Survey (LVNS, an instrument previously developed to measure the perceived incidence and severity of lateral violence (LV in the nursing workplace, was carried out. Conceptual clustering and principal components analysis were used with survey responses from 663 registered nurses and ancillary nursing staff in a southeastern tertiary care medical center. Where appropriate, Cronbach’s alpha (α evaluated internal consistency. The prevalence/severity of lateral violence items constitute two distinct subscales (LV by self and others with Cronbach’s alpha of 0.74 and 0.86, respectively. The items asking about potential causes of LV are unidimensional and internally consistent (alpha = 0.77 but there is no conceptually coherent theme underlying the various causes. Respondents rating a potential LV cause as “major” scored higher on both prevalence/severity subscales than those rating it a “minor” cause or not a cause. Subsets of items on the LVNS are internally reliable, supporting construct validity. Revisions of the original LVNS instrument will improve its use in future work.

  1. Application of software engineering to development of reactor safety codes

    International Nuclear Information System (INIS)

    Wilburn, N.P.; Niccoli, L.G.

    1981-01-01

    Software Engineering, which is a systematic methodology by which a large scale software development project is partitioned into manageable pieces, has been applied to the development of LMFBR safety codes. The techniques have been applied extensively in the business and aerospace communities and have provided an answer to the drastically increasing cost of developing and maintaining software. The five phases of software engineering (Survey, Analysis, Design, Implementation, and Testing) were applied in turn to development of these codes, along with Walkthroughs (peer review) at each stage. The application of these techniques has resulted in SUPERIOR SOFTWARE which is well documented, thoroughly tested, easy to modify, easier to use and maintain. The development projects have resulted in lower overall cost. (orig.) [de

  2. Technology development and applications at Fernald

    International Nuclear Information System (INIS)

    Pettit, P.J.; Skriba, M.C.; Warner, R.D.

    1995-01-01

    At the Fernald Environmental Management Project (FEMP) northwest of Cincinnati, Ohio, the U.S. Department of Energy and contractor Fernald Environmental Restoration Management Corporation (FERMCO) are aggressively pursuing both the development and the application of improved, innovative technology to the environmental restoration task. Application of emerging technologies is particularly challenging in a regulatory environment that places pressure on operational managers to develop and meet tight schedules. The regulatory and operational needs make close communication essential between technology developers and technology users (CERCLA/RCRA Unit managers). At Fernald this cooperation and communication has led, not only to the development and demonstration of new technologies with applications at other sites, but also to application of new technologies directly to the Fernald clean up. New technologies have been applied to improve environmental safety and health, improve the effectiveness of restoration efforts, and to cut restoration costs. The paper will describe successful efforts to develop and apply new technologies at the FEMP and will emphasize those technologies that have been applied and are planned for use in the clean up of this former uranium production facility

  3. A survey on web modeling approaches for ubiquitous web applications

    NARCIS (Netherlands)

    Schwinger, W.; Retschitzegger, W.; Schauerhuber, A.; Kappel, G.; Wimmer, M.; Pröll, B.; Cachero Castro, C.; Casteleyn, S.; De Troyer, O.; Fraternali, P.; Garrigos, I.; Garzotto, F.; Ginige, A.; Houben, G.J.P.M.; Koch, N.; Moreno, N.; Pastor, O.; Paolini, P.; Pelechano Ferragud, V.; Rossi, G.; Schwabe, D.; Tisi, M.; Vallecillo, A.; Sluijs, van der K.A.M.; Zhang, G.

    2008-01-01

    Purpose – Ubiquitous web applications (UWA) are a new type of web applications which are accessed in various contexts, i.e. through different devices, by users with various interests, at anytime from anyplace around the globe. For such full-fledged, complex software systems, a methodologically sound

  4. Aplicação do QFD no desenvolvimento de produtos: levantamento sobre seu uso e perspectivas para pesquisas futuras QFD application in product development: survey of its use and perspesctives for future research

    Directory of Open Access Journals (Sweden)

    José Antonio Carnevalli

    2004-04-01

    Full Text Available O objetivo deste trabalho é avaliar a extensão do uso do QFD no Brasil, investigando, principalmente, as maiores empresas privadas por faturamento, de forma a identificar os benefícios e dificuldades para implementar o método, bem como organizações que já têm experiência com sua aplicação. Para atingir esse objetivo, um levantamento exploratório tipo survey foi realizado em uma amostra não aleatória, utilizando como instrumento para coleta dos dados um questionário enviado via correio. A taxa de retorno foi de aproximadamente 21%, e os resultados indicaram que pouco mais de 18% das empresas utilizam o método. Essas empresas iniciaram a aplicação do QFD durante os anos 90, indicando que a utilização do QFD é relativamente recente no País. Em relação às dificuldades para implementar o QFD, o maior problema foi relacionado à falta de experiência em sua utilização. Quanto aos benefícios decorrentes do QFD, os mais importantes foram o aumento da satisfação dos clientes e a melhoria do trabalho em equipe e comunicação entre áreas funcionais. Adicionalmente, a survey identificou cinco empresas com experiência em QFD, que podem ser consideradas referências no uso do método no País. Finalmente, o trabalho apresenta algumas perspectivas para pesquisas futuras.The objective of this work is to evaluate the extension of the use of QFD in Brazil, studying mainly the largest private companies, in order to identify the benefits and difficulties to implement this method as well as companies which already have experience in its use. To achieve this aim, an exploratory survey was carried out, with a non-random sample, using as technique a questionnaire sent by surface mail. The return rate was about 21% and the results showed that a bit more than 18% use the method. Companies started to make use of QFD during the 90s, showing that the use of QFD in Brazil is still relatively recent. Concerning the difficulties to implement

  5. Electrochemical surface plasmon spectroscopy-Recent developments and applications

    International Nuclear Information System (INIS)

    Zhang, Nan; Schweiss, Ruediger; Zong, Yun; Knoll, Wolfgang

    2007-01-01

    A survey is given on recent developments and applications of electrochemical techniques combined with surface plasmon resonance (SPR) spectroscopy. Surface plasmon spectroscopy (SPS) and optical waveguide mode spectroscopy make use of evanescent waves on metal-dielectric interfaces and can be conveniently combined with electrochemical methods. Selected examples of applications of high-pressure surface electrochemical plasmon resonance spectroscopy to study supramolecular architectures such as layer-by-layer films of conducting polymers or thin composite films will be presented. Then a combination of SPS with the electrochemical quartz crystal microbalance (EQCM) will be introduced and illustrated with a study on doping/de-doping process of a conducting polymer. This combination allows for simultaneous electrochemical, optical and microgravimetric characterization of interfaces. Finally, new technical developments including integration of SPS into microfluidic devices using a grating coupler and surface plasmon enhanced diffraction will be discussed

  6. Practical guidelines for developing a smartphone-based survey instrument

    DEFF Research Database (Denmark)

    Ohme, Jakob; de Vreese, Claes Holger; Albæk, Erik

    The increasing relevance of mobile surveys makes it important to gather empirical evidence on designs of such surveys. This research note presents the results of a test study conducted to identify the best set-up for a smartphone-based survey. We base our analysis on a random sample of Danish...

  7. Annual Survey of Significant Developments in General Economic Theory

    NARCIS (Netherlands)

    J. Tinbergen (Jan)

    1934-01-01

    textabstractThis survey may be opened with some apologetic remarks. The first is that to write a complete survey would mean to write a book. This has not been the intention of the editor, nor does it lie within the power of the present writer. Therefore, this survey is, in principle, incomplete, as

  8. Development of Vertical Cable Seismic System for Hydrothermal Deposit Survey (2) - Feasibility Study

    Science.gov (United States)

    Asakawa, E.; Murakami, F.; Sekino, Y.; Okamoto, T.; Mikada, H.; Takekawa, J.; Shimura, T.

    2010-12-01

    In 2009, Ministry of Education, Culture, Sports, Science and Technology(MEXT) started the survey system development for Hydrothermal deposit. We proposed the Vertical Cable Seismic (VCS), the reflection seismic survey with vertical cable above seabottom. VCS has the following advantages for hydrothermal deposit survey. . (1) VCS is an effective high-resolution 3D seismic survey within limited area. (2) It achieves high-resolution image because the sensors are closely located to the target. (3) It avoids the coupling problems between sensor and seabottom that cause serious damage of seismic data quality. (4) Various types of marine source are applicable with VCS such as sea-surface source (air gun, water gun etc.) , deep-towed or ocean bottom sources. (5) Autonomous recording system. Our first experiment of 2D/3D VCS surveys has been carried out in Lake Biwa, JAPAN. in November 2009. The 2D VCS data processing follows the walk-away VSP, including wave field separation and depth migration. The result gives clearer image than the conventional surface seismic. Prestack depth migration is applied to 3D data to obtain good quality 3D depth volume. Uncertainty of the source/receiver poisons in water causes the serious problem of the imaging. We used several transducer/transponder to estimate these positions. The VCS seismic records themselves can also provide sensor position using the first break of each trace and we calibrate the positions. We are currently developing the autonomous recording VCS system and planning the trial experiment in actual ocean to establish the way of deployment/recovery and the examine the position through the current flow in November, 2010. The second VCS survey will planned over the actual hydrothermal deposit with deep-towed source in February, 2011.

  9. Integrated development environment for fuzzy logic applications

    Science.gov (United States)

    Pagni, Andrea; Poluzzi, Rinaldo; Rizzotto, GianGuido; Lo Presti, Matteo

    1993-12-01

    During the last five years, Fuzzy Logic has gained enormous popularity, both in the academic and industrial worlds, breaking up the traditional resistance against changes thanks to its innovative approach to problems formalization. The success of this new methodology is pushing the creation of a brand new class of devices, called Fuzzy Machines, to overcome the limitations of traditional computing systems when acting as Fuzzy Systems and adequate Software Tools to efficiently develop new applications. This paper aims to present a complete development environment for the definition of fuzzy logic based applications. The environment is also coupled with a sophisticated software tool for semiautomatic synthesis and optimization of the rules with stability verifications. Later it is presented the architecture of WARP, a dedicate VLSI programmable chip allowing to compute in real time a fuzzy control process. The article is completed with two application examples, which have been carried out exploiting the aforementioned tools and devices.

  10. NanoBiosensing Principles, Development and Application

    CERN Document Server

    Ju, Huangxian; Wang, Joseph

    2011-01-01

    This book will cover the full scope of nanobiosensing, which combines the newest research results in the cross-disciplines of chemistry, biology, and materials science with biosensing and bioanalysis to develop novel detection principles, sensing mechanisms, and device engineering methods. It not only covers the important types of nanomaterials for biosensing applications, including carbon nanotubes, carbon nanofiber, quantum dots, fullerenes, fluorescent and biological molecules, etc., but also illustrates a wide range of sensing principles, including electrochemical detection, fluorescence, chemiluminesence, antibody-antigen interactions, and magnetic detection. The book details novel developments in the methodology and devices of biosensing and bioanalysis combined with nanoscience and nanotechnology, as well as their applications in biomedicine and environmental monitoring. Furthermore, the reported works on the application and biofunction of nanoparticles have attracted extensive attention and interest, ...

  11. Damage analysis: damage function development and application

    International Nuclear Information System (INIS)

    Simons, R.L.; Odette, G.R.

    1975-01-01

    The derivation and application of damage functions, including recent developments for the U.S. LMFBR and CTR programs, is reviewed. A primary application of damage functions is in predicting component life expectancies; i.e., the fluence required in a service spectrum to attain a specified design property change. An important part of the analysis is the estimation of the uncertainty in such fluence limit predictions. The status of standardizing the procedures for the derivation and application of damage functions is discussed. Improvements in several areas of damage function development are needed before standardization can be completed. These include increasing the quantity and quality of the data used in the analysis, determining the limitations of the analysis due to the presence of multiple damage mechanisms, and finally, testing of damage function predictions against data obtained from material surveillance programs in operating thermal and fast reactors. 23 references. (auth)

  12. Solar Photovoltaic Electricity Applications in France. National Survey Report 2008

    International Nuclear Information System (INIS)

    Durand, Yvonnick; Jacquin, Philippe

    2009-01-01

    growth in the so called 'eligible' products on the market. The availability of an increasing number of technical solutions on the market enables builders, architects and promoters to offer their clients new options for incorporating photovoltaics into their structures. The development of the market has attracted new stakeholders at all stages of the photovoltaic supply line, and many companies have been created to study, engineer, install, provide and operate such systems. Investors are taking part in large-scale projects, such as the construction of major multi-megawatt ground power plants. New activities and actors are appearing, such as in the field of funding specifically for photovoltaic projects, leasing rooftops for installing systems and surveying ground for building power plants on. The industrial sector has been strengthened with the ambition to be able to vertically integrate the photovoltaic supply chain, from the production of silicon to the operation of electrical power production systems. This development creates jobs. According to the SER's member companies (which represent 80% of the market), photovoltaic activity has generated about 1,500 direct jobs in 2008, and the total estimated jobs for supply chain is about 4,000, or three times what it was in 2004, representing 70% growth over 2007. A new consortium that has brought together private companies and public bodies, known as the 'PV Alliance Lab Fab' was established, and a major R and D project known as 'Solar Nano Crystal' began in late 2008. Research programs concentrate efforts to improve the conversion efficiency of cells and modules, as well as their life span. A major effort has been undertaken to reduce production costs, engineer new photovoltaic materials, prevent environmental impacts, and manage systems. ADEME (the French Environment and Energy Management Agency) as well as ANR (the National Research Agency www.agence-nationale-recherche.fr), OSEO

  13. PySide GUI application development

    CERN Document Server

    Loganathan, Venkateshwaran

    2013-01-01

    An accessible and practical guide to developing GUI's for Python applications.This book is written for Python programmers who want to learn about GUI programming. It is also suitable for those who are new to Python but are familiar with object-oriented programming.

  14. Multiple application coded switch development report

    International Nuclear Information System (INIS)

    Bernal, E.L.; Kestly, J.D.

    1979-03-01

    The development of the Multiple Application Coded Switch (MACS) and its related controller are documented; the functional and electrical characteristics are described; the interface requirements defined, and a troubleshooting guide provided. The system was designed for the Safe Secure Trailer System used for secure transportation of nuclear material

  15. The SIESTA method; developments and applicability

    International Nuclear Information System (INIS)

    Artacho, Emilio; Anglada, E; Dieguez, O; Gale, J D; Garcia, A; Junquera, J; Martin, R M; Ordejon, P; Pruneda, J M; Sanchez-Portal, D; Soler, J M

    2008-01-01

    Recent developments in and around the SIESTA method of first-principles simulation of condensed matter are described and reviewed, with emphasis on (i) the applicability of the method for large and varied systems (ii) efficient basis sets for the standards of accuracy of density-functional methods (iii) new implementations, and (iv) extensions beyond ground-state calculations

  16. Applications and development trends in biopesticides | Leng ...

    African Journals Online (AJOL)

    Biopesticides are very effective in the agricultural pest control without causing serious harm to ecological chain or worsening environmental pollution. The research and development of practical applications in the field of biopesticides greatly mitigate environmental pollution caused by chemical pesticide residues and ...

  17. Methodology of developing a smartphone application for crisis research and its clinical application.

    Science.gov (United States)

    Zhang, Melvyn W B; Ho, Cyrus S H; Fang, Pan; Lu, Yanxia; Ho, Roger C M

    2014-01-01

    Recent advancement in Internet based technologies have resulted in the growth of a sub-specialized field, termed as "Infodemiology" and "Infoveillance". Infoveillence refers to the collation of infodemiology measures for the purpose of surveillance and trending. Previous research has only demonstrated the research potential of Web 2.0 medium in collation of data in crisis situation. The objectives for the current study are to demonstrate the methodology of implementation of a smartphone-based application for dissemination and collation of information during a crisis situation. The Haze Smartphone application was developed using an online application builder and using HTML5 as the core programming language. A five-phase developmental method including a) formulation of user requirements, b) system design, c) system development, d) system evaluation and finally e) system application and implementation were adopted. The smartphone application was deployed during a one-week period via a self-sponsored Facebook post and via direct dissemination of the web-links by emails. A total of 298 respondents took part in the survey within the application. Most of them were between the ages of 20- to 29-years old and had a university education. More individuals preferred the option of accessing and providing feedback to a survey on physical and psychological wellbeing via direct access to a Web-based questionnaire. In addition, the participants reported a mean number of 4.03 physical symptoms (SD 2.6). The total Impact of Event Scale-Revised (IES-R) score was 18.47 (SD 11.69), which indicated that the study population did experience psychological stress but not posttraumatic stress disorder. The perceived dangerous Pollutant Standards Index (PSI) level and the number of physical symptoms were associated with higher IES-R Score (Psmartphone application could potentially be used to acquire research data in a crisis situation. However, it is crucial for future research to further

  18. Emigration Rates From Sample Surveys: An Application to Senegal.

    Science.gov (United States)

    Willekens, Frans; Zinn, Sabine; Leuchter, Matthias

    2017-12-01

    What is the emigration rate of a country, and how reliable is that figure? Answering these questions is not at all straightforward. Most data on international migration are census data on foreign-born population. These migrant stock data describe the immigrant population in destination countries but offer limited information on the rate at which people leave their country of origin. The emigration rate depends on the number leaving in a given period and the population at risk of leaving, weighted by the duration at risk. Emigration surveys provide a useful data source for estimating emigration rates, provided that the estimation method accounts for sample design. In this study, emigration rates and confidence intervals are estimated from a sample survey of households in the Dakar region in Senegal, which was part of the Migration between Africa and Europe survey. The sample was a stratified two-stage sample with oversampling of households with members abroad or return migrants. A combination of methods of survival analysis (time-to-event data) and replication variance estimation (bootstrapping) yields emigration rates and design-consistent confidence intervals that are representative for the study population.

  19. A survey of oil product demand elasticities for developing countries

    International Nuclear Information System (INIS)

    Dahl, Carol

    1994-01-01

    As more and more developing countries join the ranks of the rich they will consume both more oil and higher percentage of the lighter products. To satisfy this growing demand oil production and refinery capacity that can provide the right quantity and mix of products must be developed. In a companion piece, Dahl (1993) found the total demand for oil to be price inelastic (-0.34) and income elastic (1.32) These elasticities can give information on the total quantity of oil that might be demanded, the total amount of distillation capacity that might be needed and the overall increases in product prices that might be necessary to choke off demand growth. However, with this overall growth in product demand, the more the shift towards the lighter portion of the barrel, the more complex the refinery and the greater the demand for downstream capital. To provide information on this mix in developing countries in the coming years, this paper surveys the available work on econometric demand elasticities by oil product. (author)

  20. Survey of renewable energy utilization and development potential in Oceania

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper reports fiscal 2000 survey of renewable energy utilization and development potential in Oceania. In Australia and New Zealand, renewable energy has already fairly been used. In Australia, it is promoted on the government policy level, with cost reduction and improved reliability in progress. The growth of 2% is set as a target in the year 2010. Promising are biomass and wind, while contributory in the long run are photovoltaic energies. New installations of hydraulic power generation are few, but potential is high for mini hydraulic power generation. Social interest is also comparatively high in renewable energies and greenhouse effect gas. However, further technological development is necessary for a full-scale contribution to global environmental problems. The situation in other south Pacific nations depends on their policy, economic condition and level of industrialization; each country heavily imports diesel oil for power generation, is under-developed industry-wise, and is a low income nation. The countries are desperately in need of foreign investment for the purpose of solving these problems. (NEDO)

  1. Development and applications of microanalytical techniques

    International Nuclear Information System (INIS)

    Cholewa, M.

    2005-05-01

    The development of new analytical techniques is an essential part of our everyday life and is dictated by strong progress in modern science and technology. Both these areas require more precise information about materials and processes involved. Due to these requirements we have been observing a rapid growth in the development of techniques that require both a high spatial resolution and high sensitivity. Modern analytical techniques provide an important interface between science and applications. The works presented in this habilitation thesis span the period of almost 20 years. During this time the author has been leading the development and applications of several new analytical and micro analytical techniques which have been documented in this thesis. This development has required development of ideas, strong leadership, organisational skills, organisation of funds and groups to carry out the necessary work. In chapter 3 the use of the PIXE and XANES techniques described an investigation of permeability for selected elements inside cells. It was important to develop new protocols for sample preparation and analysis and a large number of cells were necessary in order to obtain meaningful data. This development was closely associated with work presented in chapter 4 where the role of sample damage under the MeV ion beam bombardment was investigated. At that time we were the leading group in the world to perform such studies. Chapter 5 describes development of new analytical techniques and its possible applications. Development of the SIHF has been probably the most demanding and difficult project and was described in chapter 6 and it was closely related with development of a diamond detector described in chapter 7. A great part of these works were performed by the author at the Micro Analytical Research Centre (MARC) in the School of Physics at the University of Melbourne in Australia. However, some works were performed at GSI in Germany and BNL in USA. (author)

  2. U.S. Geological Survey (USGS) Earthquake Web Applications

    Science.gov (United States)

    Fee, J.; Martinez, E.

    2015-12-01

    USGS Earthquake web applications provide access to earthquake information from USGS and other Advanced National Seismic System (ANSS) contributors. One of the primary goals of these applications is to provide a consistent experience for accessing both near-real time information as soon as it is available and historic information after it is thoroughly reviewed. Millions of people use these applications every month including people who feel an earthquake, emergency responders looking for the latest information about a recent event, and scientists researching historic earthquakes and their effects. Information from multiple catalogs and contributors is combined by the ANSS Comprehensive Catalog into one composite catalog, identifying the most preferred information from any source for each event. A web service and near-real time feeds provide access to all contributed data, and are used by a number of users and software packages. The Latest Earthquakes application displays summaries of many events, either near-real time feeds or custom searches, and the Event Page application shows detailed information for each event. Because all data is accessed through the web service, it can also be downloaded by users. The applications are maintained as open source projects on github, and use mobile-first and responsive-web-design approaches to work well on both mobile devices and desktop computers. http://earthquake.usgs.gov/earthquakes/map/

  3. Photovoltaic Power Applications in France. National Survey Report 2011

    International Nuclear Information System (INIS)

    Durand, Yvonnick

    2012-01-01

    According to the French observation and statistics office (SOeS, 2012-02), the grid-connected installed photovoltaic (PV) power in France during 2011 was 1 634 MW compared with 817 MW in 2010. The installed grid-connected PV power doubled but the total number of systems decreased by 26 %. The 100 % annual power increase comes mainly from medium power systems (36 kW to 250 kW) contributing to 36 % and large power systems (> 250 kW) representing 46 % of annual installed power. Ground-mounted centralised systems connected to the electricity grid during 2011 are estimated at 402 MW and distributed systems (mainly building applications) reached 1 232 MW. Grid-connected cumulative PV power capacity at the end of 2011 was 2 802 MW (242 295 systems), compared with the 1 168 MW (163 004 systems) at the end of 2010. Building integrated residential systems of less than 3 kW represented 89 % of the total number of installations and 20 % of total cumulative power while systems of power greater than 36 kW represented 3 % of the number of installations and 69 % of total cumulative power capacity. By a decree dated 4 March 2011, a new support system was proposed with a target of 500 MW per year of new projects over the next few years. The government's policy confirmed its priority to focus on building-integrated photovoltaic applications. The new support system introduces two separate mechanisms, based on the power of the installations. Under the first mechanism, for installations on buildings of less than 100 kW, feed-in tariffs are adjusted each quarter based on the total volume of projects submitted during the previous quarter. The second support mechanism involves a bidding system for large roof installations and photovoltaic ground-mounted power plants greater than 100 kW. Market incentives and budget There are three kinds of market incentive: enhanced feed-in tariffs, income tax credits and direct financial subsidies from local authorities. The cost of promotion through

  4. Vocabulary Development in European Portuguese: A Replication Study Using the Language Development Survey

    Science.gov (United States)

    Rescorla, Leslie; Nyame, Josephine; Dias, Pedro

    2016-01-01

    Purpose: Our objective was to replicate previous cross­linguistic findings by comparing Portuguese and U.S. children with respect to (a) effects of language, gender, and age on vocabulary size; (b) lexical composition; and (c) late talking. Method: We used the Language Development Survey (LDS; Rescorla, 1989) with children (18-35 months) learning…

  5. Barriers to global health development: An international quantitative survey.

    Directory of Open Access Journals (Sweden)

    Bahr Weiss

    Full Text Available Global health's goal of reducing low-and-middle-income country versus high-income country health disparities faces complex challenges. Although there have been discussions of barriers, there has not been a broad-based, quantitative survey of such barriers.432 global health professionals were invited via email to participate in an online survey, with 268 (62% participating. The survey assessed participants' (A demographic and global health background, (B perceptions regarding 66 barriers' seriousness, (C detailed ratings of barriers designated most serious, (D potential solutions.Thirty-four (of 66 barriers were seen as moderately or more serious, highlighting the widespread, significant challenges global health development faces. Perceived barrier seriousness differed significantly across domains: Resource Limitations mean = 2.47 (0-4 Likert scale, Priority Selection mean = 2.20, Corruption, Lack of Competence mean = 1.87, Social and Cultural Barriers mean = 1.68. Some system-level predictors showed significant but relatively limited relations. For instance, for Global Health Domain, HIV and Mental Health had higher levels of perceived Social and Cultural Barriers than other GH Domains. Individual-level global health experience predictors had small but significant effects, with seriousness of (a Corruption, Lack of Competence, and (b Priority Selection barriers positively correlated with respondents' level of LMIC-oriented (e.g., weeks/year spent in LMIC but Academic Global Health Achievement (e.g., number of global health publications negatively correlated with overall barrier seriousness.That comparatively few system-level predictors (e.g., Organization Type were significant suggests these barriers may be relatively fundamental at the system-level. Individual-level and system-level effects do have policy implications; e.g., Priority Selection barriers were among the most serious, yet effects on seriousness of how LMIC-oriented a professional

  6. Development of drilling foams for geothermal applications

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, W.J.; Remont, L.J.; Rehm, W.A.; Chenevert, M.E.

    1980-01-01

    The use of foam drilling fluids in geothermal applications is addressed. A description of foams - what they are, how they are used, their properties, equipment required to use them, the advantages and disadvantages of foams, etc. - is presented. Geothermal applications are discussed. Results of industry interviews presented indicate significant potential for foams, but also indicate significant technical problems to be solved to achieve this potential. Testing procedures and results of tests on representative foams provide a basis for work to develop high-temperature foams.

  7. Implementing and developing cloud computing applications

    CERN Document Server

    Sarna, David E Y

    2010-01-01

    From small start-ups to major corporations, companies of all sizes have embraced cloud computing for the scalability, reliability, and cost benefits it can provide. It has even been said that cloud computing may have a greater effect on our lives than the PC and dot-com revolutions combined.Filled with comparative charts and decision trees, Implementing and Developing Cloud Computing Applications explains exactly what it takes to build robust and highly scalable cloud computing applications in any organization. Covering the major commercial offerings available, it provides authoritative guidan

  8. Instant Backbone.js application development

    CERN Document Server

    Hunter, Thomas

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. This book is a practical, step-by-step tutorial that will teach you to build Backbone.js applications quickly and efficiently.This book is targeted towards developers. It is assumed that you have at least a basic understanding of JavaScript and jQuery selectors. If you are interested in building dynamic Single Page Applications that interact heavily with a backend server, then this is the book for you.

  9. SignalR real time application development

    CERN Document Server

    Ingebrigtsen, Einar

    2013-01-01

    This step-by-step guide gives you practical advice, tips, and tricks that will have you writing real-time apps quickly and easily.If you are a .NET developer who wants to be at the cutting edge of development, then this book is for you. Real-time application development is made simple in this guide, so as long as you have basic knowledge of .NET, a copy of Visual Studio, and NuGet installed, you are ready to go.

  10. iPhone Application Development For Dummies

    CERN Document Server

    Goldstein, Neal

    2012-01-01

    Start building iPhone apps today with this friendly guide, now in full color! Whether you're a beginning programmer who wants to build your first app or a professional developer looking to leverage the marketing power of the iPhone SDK, this book will help. It walks you through the basics for building a variety of iOS applications using Apple developer tools and covers the essential steps for creating apps that get accepted into the App Store. This new edition covers all the latest information, including key updates to iPad universal code and tips on developing specifically for mobile apps. F

  11. FY 1999 basic survey of coal resource development. Coal GIS survey; 1999 nendo sekitan shigen kaihatsu kiso chosa. Sekitan GIS chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The purpose of this survey is to construct a comprehensive coal field assessment technology system which can promptly cope with any natural conditions/geological situations of coal field. As to the GIS (geographical information system) which can unifiedly manage/analyze various data being used in other fields, survey was conducted of present situations/technology trends of the resource related GIS, and at the same time the survey is aimed at applying it to the coal resource field. In the survey in this fiscal year, based on the survey made in FY 1998, applicability of GIS function was verified for Australia where the coal GIS is prepared. And the fundamental design was made to construct a coal GIS considered of concrete application in the stage of coal resource exploration and resource assessment. In the fundamental design, prototypes of individual functions of the system were made. Making the analysis using the actual data, expansion and complication of the system size were advanced step by step toward the completion of the system. Such prototypical development method was adopted. (NEDO)

  12. Hospitality managers’ price-ending beliefs: a survey and applications

    OpenAIRE

    Schindler, Robert M.; Parsa, H. G.; Naipaul, Sandra

    2011-01-01

    The use of “just-below” pricing (such as pricing an item at $6.99 or $6.95, rather than $7.00) has been common in some segments of the hospitality industry (such as quick-service and mid-scale dining). The results of a detailed survey of the price-ending beliefs of hospitality managers show that many believe that just-below prices connote good value and roundnumber prices connote high quality. Furthermore, the majority of these managers believe that consumers tend to drop off or otherwise giv...

  13. Application of Logic to Integer Sequences: A Survey

    Science.gov (United States)

    Makowsky, Johann A.

    Chomsky and Schützenberger showed in 1963 that the sequence d L (n), which counts the number of words of a given length n in a regular language L, satisfies a linear recurrence relation with constant coefficients for n, or equivalently, the generating function g_L(x)=sumn d_L(n) x^n is a rational function. In this talk we survey results concerning sequences a(n) of natural numbers which satisfy linear recurrence relations over ℤ or ℤ m , and

  14. Development of aerial gamma radiation survey system, 4

    International Nuclear Information System (INIS)

    Saito, Kimiaki; Nagaoka, Toshi; Sakamoto, Ryuichi; Tsutsumi, Masahiro; Moriuchi, Shigeru

    1985-02-01

    Field experiments have been performed by JAERI since 1982 to obtain fundamental data required for development of aerial radiation survey system. In order to supplement the fundamental radiation data, theoretical calculations have been carried out. The utilized Monte Carlo transport program was verified by simulative calculations of the field experiments, and characteristics data on environmental gamma rays have been accumulated. In this report, the field experiments in 1981 and 1982 were simulated making use of the Monte Carlo transport calculation code YURI developed in JAERI. Comparisons were made between experimental and calculated results for exposure rate and flux density originated from terrestrial sources, and from a point source at height of 2.5 m above the ground. Good agreements between the data verified the transport program. As fundamental characteristics data on environmental gamma rays, spatial distributions of exposure, fluence, energy spectra, angular spectra and average energy were reported and discussed, for terrestrial sources of 40 K, 232 Th-series and 238 U-series, for a plane source on the ground and for a point source at 2.5 m above the ground. (author)

  15. Status of radiation applications in developing countries

    International Nuclear Information System (INIS)

    Roushdy, H.M.

    1979-01-01

    A summary is given of the following applications: radiotherapy; sterilization of medical products and biological tissues; inactivation of virus; food preservation; insect control and eradication; improvement in field crops; treatment of waste waters and sewage sludge. In industry, irradiation technology has contributed to the manufacturing industries for new product developments in the plastics, textiles, wood, rubber, petroleum, concrete and chemical industries. Irradiation technology offers a fascinating outlet for developing countries for improving their condition of medical care, upgrading of their natural materials, stimulating their industrial development, decreasing their food losses and increasing their crop production. These lines would certainly contribute to their national economy and would result in an enhanced rate of development. However, transfer of radiation technology to developing countries should be undertaken in view of the actual national and regional needs and supported by an overall well studied national and regional planning for trained manpower development. The choice of a radiation source for a potential application should be based on the demand of the process, compromise between desirability and cost and quantitative data on installation, operation and maintenance conditions, and costs. The program developed and implemented by Egypt is herein presented. Facilities, organization, personnel, current and past activities, and future plans are described. (author)

  16. Development of a hand-held fast neutron survey meter

    International Nuclear Information System (INIS)

    Yoshida, T.; Tsujimura, N.; Yamano, T.

    2011-01-01

    A neutron survey meter with a ZnS(Ag) scintillator to measure recoil protons was built. The detection probe weighs ∼2 kg, therefore providing us with true portability. Performance tests exhibited satisfactory neutron dosimetry characteristics in unmoderated or lightly moderated fission neutron fields and in particular work environments at a mixed oxide fuel facility. This new survey meter will augment a routine of neutron monitoring that is inconveniently being carried out by moderator-based neutron survey meters. (authors)

  17. iPad application development for dummies

    CERN Document Server

    Goldstein, neal

    2010-01-01

    Making Everything Easier!With iPhone? Application Development for Dummies, Second Edition, you'll learn to: Design small- or large-scale iPhone applications for profit or fun Create new iPhone apps using Xcode? Get your applications into the App Store Work with frameworks Got a good idea? Turn it into an app, have some fun, and pick up some cash!Make the most of the new 3.1 OS and Apple's Xcode 3.2! Neal Goldstein shows you how, and even illustrates the process with one of his own apps that's currently being sold. Even if you're not a programming pro, you can turn your bright idea into an app

  18. UAV MULTISPECTRAL SURVEY TO MAP SOIL AND CROP FOR PRECISION FARMING APPLICATIONS

    Directory of Open Access Journals (Sweden)

    G. Sona

    2016-06-01

    Full Text Available New sensors mounted on UAV and optimal procedures for survey, data acquisition and analysis are continuously developed and tested for applications in precision farming. Procedures to integrate multispectral aerial data about soil and crop and ground-based proximal geophysical data are a recent research topic aimed to delineate homogeneous zones for the management of agricultural inputs (i.e., water, nutrients. Multispectral and multitemporal orthomosaics were produced over a test field (a 100 m x 200 m plot within a maize field, to map vegetation and soil indices, as well as crop heights, with suitable ground resolution. UAV flights were performed in two moments during the crop season, before sowing on bare soil, and just before flowering when maize was nearly at the maximum height. Two cameras, for color (RGB and false color (NIR-RG images, were used. The images were processed in Agisoft Photoscan to produce Digital Surface Model (DSM of bare soil and crop, and multispectral orthophotos. To overcome some difficulties in the automatic searching of matching points for the block adjustment of the crop image, also the scientific software developed by Politecnico of Milan was used to enhance images orientation. Surveys and image processing are described, as well as results about classification of multispectral-multitemporal orthophotos and soil indices.

  19. 75 FR 30773 - United States Patent Applicant Survey

    Science.gov (United States)

    2010-06-02

    ... comments by any of the following methods: E-mail: [email protected] . Include ``0651- 0052... several years the USPTO has supported an ongoing forecasting program for patent application filings that includes the use of quantitative and qualitative methodologies. Given the importance of accurate...

  20. Application of Integrated Photogrammetric and Terrestrial Laser Scanning Data to Cultural Heritage Surveying

    Science.gov (United States)

    Klapa, Przemyslaw; Mitka, Bartosz; Zygmunt, Mariusz

    2017-12-01

    The terrestrial laser scanning technology has a wide spectrum of applications, from land surveying, civil engineering and architecture to archaeology. The technology is capable of obtaining, in a short time, accurate coordinates of points which represent the surface of objects. Scanning of buildings is therefore a process which ensures obtaining information on all structural elements a building. The result is a point cloud consisting of millions of elements which are a perfect source of information on the object and its surrounding. The photogrammetric techniques allow documenting an object in high resolution in the form of orthophoto plans, or are a basis to develop 2D documentation or obtain point clouds for objects and 3D modelling. Integration of photogrammetric data and TLS brings a new quality in surveying historic monuments. Historic monuments play an important cultural and historical role. Centuries-old buildings require constant renovation and preservation of their structural and visual invariability while maintaining safety of people who use them. The full process of surveying allows evaluating the actual condition of monuments and planning repairs and renovations. Huge sizes and specific types of historic monuments cause problems in obtaining reliable and full information on them. The TLS technology allows obtaining such information in a short time and is non-invasive. A point cloud is not only a basis for developing architectural and construction documentation or evaluation of actual condition of a building. It also is a real visualization of monuments and their entire environment. The saved image of object surface can be presented at any time and place. A cyclical TLS survey of historic monuments allows detecting structural changes and evaluating damage and changes that cause deformation of monument’s components. The paper presents application of integrated photogrammetric data and TLS illustrated on an example of historic monuments from southern

  1. Development in fiscal 1998 of silicon manufacturing process to rationalize energy usage. Surveys and researches on analysis of practical application of technology to manufacture silicon raw materials for solar cells; 1998 nendo energy shiyo gorika silicon seizo process kaihatsu seika hokokusho. Taiyo denchi silicon genryo seizo gijutsu no jitsuyoka kaiseki ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    With an objective to develop a mass production technology to manufacture silicon raw materials for solar cells, and assist its practical application, surveys and analyses were performed on trends in development of the related technologies, the problems therein , market trends and industrial trends thereof. This paper summarizes the achievements in fiscal 1998. The worldwide production amount of solar cells in 1998 is estimated to have achieved 150 MW, and the silicon consumption reached the level of 2,300 tons. In spite of the economic recession environment, there was no change in the expansion trend. In developing an SOG-Si mass production and manufacturing technology, construction of pilot plants for each process has been completed, and entered into the operation research phase. In developing a technology to manufacture high quality poly-crystalline silicon substrates, fabrication has been completed on the on-line ingot cutting equipment and the plasma heating equipment, and the stage is now in operation research of continuous electromagnetic casting process. The conversion efficiency of the poly-crystalline silicon solar cells is 14 to 16% at the mass production level, whose enhancement requires indispensably the improvement in quality of the substrate. Discussions are required on the ingot manufacturing conditions in coordination with improvement in the cell manufacturing technology. (NEDO)

  2. Automation of Survey Data Processing, Documentation and Dissemination: An Application to Large-Scale Self-Reported Educational Survey.

    Science.gov (United States)

    Shim, Eunjae; Shim, Minsuk K.; Felner, Robert D.

    Automation of the survey process has proved successful in many industries, yet it is still underused in educational research. This is largely due to the facts (1) that number crunching is usually carried out using software that was developed before information technology existed, and (2) that the educational research is to a great extent trapped…

  3. Primer Vector Optimization: Survey of Theory, new Analysis and Applications

    Science.gov (United States)

    Guzman

    This paper presents a preliminary study in developing a set of optimization tools for orbit rendezvous, transfer and station keeping. This work is part of a large scale effort undergoing at NASA Goddard Space Flight Center and a.i. solutions, Inc. to build generic methods, which will enable missions with tight fuel budgets. Since no single optimization technique can solve efficiently all existing problems, a library of tools where the user could pick the method most suited for the particular mission is envisioned. The first trajectory optimization technique explored is Lawden's primer vector theory [Ref. 1]. Primer vector theory can be considered as a byproduct of applying Calculus of Variations (COV) techniques to the problem of minimizing the fuel usage of impulsive trajectories. For an n-impulse trajectory, it involves the solution of n-1 two-point boundary value problems. In this paper, we look at some of the different formulations of the primer vector (dependent on the frame employed and on the force model). Also, the applicability of primer vector theory is examined in effort to understand when and why the theory can fail. Specifically, since COV is based on "small variations", singularities in the linearized (variational) equations of motion along the arcs must be taken into account. These singularities are a recurring problem in analyzes that employ "small variations" [Refs. 2, 3]. For example, singularities in the (2-body problem) variational equations along elliptic arcs occur when [Ref. 4], 1) the difference between the initial and final times is a multiple of the reference orbit period, 2) the difference between the initial and final true anomalies are given by k, for k= 0, 1, 2, 3,..., note that this cover the 3) the time of flight is a minimum for the given difference in true anomaly. For the N-body problem, the situation is more complex and is still under investigation. Several examples, such as the initialization of an orbit (ascent trajectory) and

  4. Herding agent field application system development

    Energy Technology Data Exchange (ETDEWEB)

    Buist, Ian; Belore, Randy [SL Ross Environmental Research (Canada)], email: ian@slross.com

    2011-07-01

    Chemical herding agents can be applied to deal with an oil slick. This study investigates the key system components of application systems for herding agents and shows how application systems can also be developed for operational herder usage in drift ice. These two application systems are respectively required for small boat and a helicopter operations. The factors, including the selection of flow rates, pressures and atomizing nozzle types, which give the appropriate herder droplet size distributions for small boat and aerial application systems were investigated in the initial stage of the study. In a later stage, on commercializing herders for in situ burning, further research is expected to deal with the many problems not tackled in the initial stage, such as the mounting of the nozzles, pumps and reservoirs on various aerial platforms and the provision of heating and insulation for cold-weather use. The paper presented the experiments and simulations that have been conducted as well as the basic design parameters for field application systems.

  5. The development and applications of biomarkers

    International Nuclear Information System (INIS)

    Normandy, J.; Peeters, J.

    1994-01-01

    This report is a compilation of submitted abstracts of scientific papers presented at the second Department of Energy-supported workshop on the use and applications of biomarkers held in Santa Fe, New Mexico, from April 26--29, 1994. The abstracts present a synopsis of the latest scientific developments in biomarker research and how these developments meet with the practical needs of the occupational physician as well as the industrial hygienist and the health physicist. In addition to considering the practical applications and potential benefits of this promising technology, the potential ethical and legal ramifications of using biomarkers to monitor workers are discussed. The abstracts further present insights on the present benefits that can be derived from using biomarkers as well as a perspective on what further research is required to fully meet the needs of the medical community

  6. The development and applications of biomarkers

    Energy Technology Data Exchange (ETDEWEB)

    Normandy, J.; Peeters, J. [eds.

    1994-04-15

    This report is a compilation of submitted abstracts of scientific papers presented at the second Department of Energy-supported workshop on the use and applications of biomarkers held in Santa Fe, New Mexico, from April 26--29, 1994. The abstracts present a synopsis of the latest scientific developments in biomarker research and how these developments meet with the practical needs of the occupational physician as well as the industrial hygienist and the health physicist. In addition to considering the practical applications and potential benefits of this promising technology, the potential ethical and legal ramifications of using biomarkers to monitor workers are discussed. The abstracts further present insights on the present benefits that can be derived from using biomarkers as well as a perspective on what further research is required to fully meet the needs of the medical community.

  7. Survey of electronic safety systems in accelerator applications

    International Nuclear Information System (INIS)

    Mahoney, K.

    1997-01-01

    This paper presents the preliminary results and analysis of a comprehensive survey of the implementation of accelerator safety interlock systems from over 30 international labs. At the present time there is not a self consistent means to evaluate both the experiences and level of protection provided by electronic safety interlock systems. This research is intended to analyze the strength and weaknesses of several different types of interlock system implementation methodologies. Research, medical, and industrial accelerators are compared. Thomas Jefferson National Accelerator Facility (TJNAF) was one of the first large particle accelerators to implement a safety interlock system using programmable logic controllers. Since that time all of the major new U.S. accelerator construction projects plan to use some form of programmable electronics as part of a safety interlock system in some capacity

  8. Application of computers in a radiological survey program

    International Nuclear Information System (INIS)

    Berven, B.A.; Blair, M.S.; Doane, R.W.; Little, C.A.; Perdue, P.T.

    1984-01-01

    Computers have become increasingly important in data analysis and data management as well as assisting in report preparation in the Oak Ridge National Laboratory (ORNL) Radiological Survey Activities (RASA) Program. The primary function of the RASA program is to collect, analyze, report, and manage data collected to characterize the radiological condition of potentially contaminated sites identified in the Department of Energy's (DOE) remedial action programs. Three different computer systems are routinely utilized in ORNL/RASA operations. Two of these systems are employed in specific functions. A Nuclear Data (ND) 682 is used to perform isotopic analysis of gamma spectroscopic data generated by high-purity germanium detectors for air, water and soil samples. The ND682 employs a 16,000-channel analyzer that is routinely used with four germanium spectrometers. Word processing and data management are accomplished using the INtext system implemented on a DEC PDP-11 computer. A group of personal computers are used to perform a diverse number of functions. These computer systems are Commodore Business Machines (CBM) Model 8032 with a dual floppy disk storage medium and line printers (with optional X-Y plotters). The CBM's are utilized for: (1) data analysis -- raw data from radiation detection instrumentation are stored and manipulated with customized computer programs; (2) data reduction -- raw data are converted into report-ready tables using customized programs; (3) data management -- radionuclide data on each air, water and soil sample are stored on diskettes along with location of archived samples; and (4) program management -- site surveys and report status are tracked by computer files as well as program budget information to provide contemporary information of program status

  9. Treatment of AKI in developing and developed countries: An international survey of pediatric dialysis modalities.

    Directory of Open Access Journals (Sweden)

    Rupesh Raina

    Full Text Available Acute kidney injury (AKI is a common cause of morbidity and mortality worldwide, with a pediatric incidence ranging from 19.3% to 24.1%. Treatment of pediatric AKI is a source of debate in varying geographical regions. Currently CRRT is the treatment for pediatric AKI, but limitations due to cost and accessibility force use of adult equipment and other therapeutic options such as peritoneal dialysis (PD and hemodialysis (HD. It was hypothesized that more cost-effective measures would likely be used in developing countries due to lesser resource availability.A 26-question internet-based survey was distributed to 650 pediatric Nephrologists. There was a response rate of 34.3% (223 responses. The survey was distributed via pedneph and pcrrt email servers, inquiring about demographics, technology, resources, pediatric-specific supplies, and preference in renal replacement therapy (RRT in pediatric AKI. The main method of analysis was to compare responses about treatments between nephrologists in developed countries and nephrologists in developing countries using difference-of-proportions tests.PD was available in all centers surveyed, while HD was available in 85.1% and 54.1% (p = 0.00, CRRT was available in 60% and 33.3% (p = 0.001, and SLED was available in 20% and 25% (p = 0.45 centers of developed and developing world respectively. In developing countries, 68.5% (p = 0.000 of physicians preferred PD to costlier therapies, while in developed countries it was found that physicians favored HD (72%, p = 0.00 or CRRT (24%, p = 0.041 in infants.Lack of availability of resources, trained physicians and funds often preclude standards of care in developing countries, and there is much development needed in terms of meeting higher global standards for treating pediatric AKI patients. PD remains the main modality of choice for treatment of AKI in infants in developing world.

  10. Development of terahertz systems for imaging applications

    OpenAIRE

    Maestrojuán Biurrun, Itziar

    2016-01-01

    El principal objetivo de esta tesis fue el estudio y desarrollo de tecnología, concretamente mezcladores armónicos, trabajando a frecuencias de milimétricas y sub-milimétricas con el fin de implementar sistemas para aplicaciones de imagen. The main goal of this thesis was the study and development of technology, specifically harmonic mixers, working at millimetre and submillimetre frequencies in other to implement systems for imaging applications. A couple of sub-harmonic...

  11. Recommended system of application and development

    Science.gov (United States)

    Wang, Wei

    2018-04-01

    A recommender system is a project that helps users identify their wishes and needs. The recommender system has been successfully applied to many e-commerce environments, such as news, film, music, books and other areas of recommendation. This paper mainly discusses the application of recommendation technology in software engineering, data and knowledge engineering, configurable projects and persuasion technology, and summarizes the development trend of recommendation technology in the future.

  12. Development of β particle hemorrhoids applicator

    International Nuclear Information System (INIS)

    Cai Shanyu; Liu Yunsheng; Zhang Pinyuan; Teng Kezhi; Gu Zeliang; Li Zhi

    2012-01-01

    A brachytherapy instrument, called β particle hemorrhoid therapeutic instrument or β particle hemorrhoid applicator was developed. It is mainly composed of radiator, locator, lifter, shield sleeve and controller. It can be used to treat internal piles, external piles, combined piles, anal fissure, anal sinusitis, etc. Preliminary clinical tests indicate that the advantages of β particle intracavitary radiotherapy are safe, effective, convenient, painless and non-invasive for curing hemorrhoids comparing with other techniques. (authors)

  13. DETERMINANT OF HOUSING RENTS IN URBAN ALBANIA: AN EMPIRICAL HEDONIC PRICE APPLICATION WITH NSA SURVEY DATA

    Directory of Open Access Journals (Sweden)

    Mustafa Kahveci

    2017-06-01

    Full Text Available As an immobile, durable and heterogonous good, each housing unit has a bundle of different characteristics. Hedonic price method, which depends on the consumer theory of the classical economics, implies that each characteristic of heterogeneous goods provides a different level of satisfaction or utility to the consumer, being widely accepted as a toolkit for estimating effects of these characteristics on prices and rents. HPM expresses housing prices as the function of structural characteristics, location characteristics, and neighborhood characteristics. Theory and empirical applications of the HPM, which have been used for more than 40 years in developed countries, due to the lack of suitable data related literature is limited in Albania. The aim of this paper is to analyze the relationship between housing rents and housing characteristics in urban Albania with micro database of Living Conditions and Income Survey 2012.

  14. Geo-Coding Survey Truck Route Data: GIS Analytical Applications

    OpenAIRE

    Puenpatom, Tosmai; Jessuo, Eric

    2006-01-01

    The application of Geographic Information Systems (GIS) has been widely accepted in a number of areas, i.e. transportation, utility network, land-use, city planning, and policy planning. Transportation policy planners and transportation network analysts, for instance, use the GIS software to analyze highway traffic and congestion problems in urban areas as well as planning for new highway infrastructure and maintenance. This paper is the first attempt in the freight transportation area to dev...

  15. Development Application - Terra Nova Development - Canada-Newfoundland Benefits Plan

    International Nuclear Information System (INIS)

    1996-01-01

    The Canada-Newfoundland Benefits Plan, part of the overall application to develop the Terra Nova Field off the coast of Newfoundland details the benefits to Canadians, but most particularly to residents of Newfoundland and Labrador that a vibrant petroleum industry is expected to bring. In this document the proponents commit themselves to a course of action designed to enhance the opportunities for Canadian and Newfoundland participation in the development, in accordance with the Atlantic Accord legislation. In terms of this legislation, the project proponents are obliged to perform development functions from Newfoundland, acquire goods and services for the Terra Nova Development on a 'best value' basis, but consistent with the procurement policies and procedures for benefits. The proponents must consider Canadian and, in particular, Newfoundland benefits as one of the factors in the procurement of goods and services, and require contactors and subcontractors to adhere to the development's benefits principles, objectives and commitments. A 7-page glossary is also included

  16. APPLICATION SEGMENT ANALYSISFOR THE DEVELOPMENT STRATEGYEDUCATIONAL INSTITUTION

    Directory of Open Access Journals (Sweden)

    G. V. Alekseev

    2015-01-01

    Full Text Available Summary. Applicable at present methods of the shaping to strategies of the development of the educational institutions not always objective take into account the mutual influence and receivership separate structured and organizing block to organizations of the scholastic process, in particular work with applicant. The Article is dedicated to discussing the possibilities of the using the segment analysis for development of the strategies of the development of the educational institutions for the reason increasing produced specialist on the market of the labour real sector economy. In her is described possibility to formalize the choice of the marketing methods within the framework of approach of the stochastic programming, as section of the ill-defined logic (fuzzy logic, which is a generalizations classical theory of sets and classical formal logic. The Main reason of the using of such approach became presence ill-defined and drawn near discourses at description of the preferences applicant, quality of the formation, but consequently and missions of the educational institution. The Decision of the specified problems in significant measure promotes the ill-defined approach to modeling of the complex systems, which has obtained recognition all over the world for use the most most important factors and methods of the determination to value of the balance marketing approach on the base of the segment analysis and base expert estimation, for what is formed corresponding to about-gram for COMPUTER realizing specified approaches.

  17. Developing and testing the CHORDS: Characteristics of Responsible Drinking Survey.

    Science.gov (United States)

    Barry, Adam E; Goodson, Patricia

    2011-01-01

    Report on the development and psychometric testing of a theoretically and evidence-grounded instrument, the Characteristics of Responsible Drinking Survey (CHORDS). Instrument subjected to four phases of pretesting (cognitive validity, cognitive and motivational qualities, pilot test, and item evaluation) and a final posttest implementation. Large public university in Texas. Randomly selected convenience sample (n  =  729) of currently enrolled students. This 78-item questionnaire measures individuals' responsible drinking beliefs, motivations, intentions, and behaviors. Cronbach α, split-half reliability, principal components analysis and Spearman ρ were conducted to investigate reliability, stability, and validity. Measures in the CHORDS exhibited high internal consistency reliability and strong correlations of split-half reliability. Factor analyses indicated five distinct scales were present, as proposed in the theoretical model. Subscale composite scores also exhibited a correlation to alcohol consumption behaviors, indicating concurrent validity. The CHORDS represents the first instrument specifically designed to assess responsible drinking beliefs and behaviors. It was found to elicit valid and reliable data among a college student sample. This instrument holds much promise for practitioners who desire to empirically investigate dimensions of responsible drinking.

  18. A global survey of hydrogen energy research, development and policy

    International Nuclear Information System (INIS)

    Solomon, Barry D.; Banerjee, Abhijit

    2006-01-01

    Several factors have led to growing interest in a hydrogen energy economy, especially for transportation. A successful transition to a major role for hydrogen will require much greater cost-effectiveness, fueling infrastructure, consumer acceptance, and a strategy for its basis in renewable energy feedstocks. Despite modest attention to the need for a sustainable hydrogen energy system in several countries, in most cases in the short to mid term hydrogen will be produced from fossil fuels. This paper surveys the global status of hydrogen energy research and development (R and D) and public policy, along with the likely energy mix for making it. The current state of hydrogen energy R and D among auto, energy and fuel-cell companies is also briefly reviewed. Just two major auto companies and two nations have specific targets and timetables for hydrogen fuel cells or vehicle production, although the EU also has an aggressive, less specific strategy. Iceland and Brazil are the only nations where renewable energy feedstocks are envisioned as the major or sole future source of hydrogen. None of these plans, however, are very certain. Thus, serious questions about the sustainability of a hydrogen economy can be raised

  19. iPhone application development for dummies

    CERN Document Server

    Goldstein, Neal

    2010-01-01

    Start building iPhone apps today with this friendly guide! Whether you're a beginner programmer who wants to build yourfirst app, or a professional developer looking to leverage themarketing power of the iPhone SDK, this book walks you through thebasics for building a variety of applications. Plus, you'llget invaluable advice on navigating the App Store so you can makemoney off of your original creations. This new edition covers allthe latest information you need to know to get started developingapps immediately. Walks you through the fundamentals of developing a variety ofappl

  20. Developing Android Applications with Adobe AIR

    CERN Document Server

    Brossier, Véronique

    2011-01-01

    Put your ActionScript 3 skills to work building mobile apps. This book shows you how to develop native applications for Android-based smartphones and tablets from the ground up, using Adobe AIR. You learn the entire development process hands-on, from coding specific functions to options for getting your app published. Start by building a sample app with step-by-step instructions, using either Flash Professional or Flash Builder. Then learn how to use ActionScript libraries for typical device features, such as the camera and the accelerometer. This book includes ready-to-run example code and

  1. Application of UV Imaging in Formulation Development

    DEFF Research Database (Denmark)

    Sun, Yu; Østergaard, Jesper

    2017-01-01

    defining formulation behavior after exposure to the aqueous environments and pharmaceutical performance is critical in pharmaceutical development, manufacturing and quality control of drugs. UV imaging has been explored as a tool for qualitative and quantitative characterization of drug dissolution...... related to the structural properties of the drug substance or formulation can be monitored. UV imaging is a non-intrusive and simple-to-operate analytical technique which holds potential for providing a mechanistic foundation for formulation development. This review aims to cover applications of UV...

  2. Firing Room Remote Application Software Development

    Science.gov (United States)

    Liu, Kan

    2015-01-01

    The Engineering and Technology Directorate (NE) at National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC) is designing a new command and control system for the checkout and launch of Space Launch System (SLS) and future rockets. The purposes of the semester long internship as a remote application software developer include the design, development, integration, and verification of the software and hardware in the firing rooms, in particular with the Mobile Launcher (ML) Launch Accessories (LACC) subsystem. In addition, a software test verification procedure document was created to verify and checkout LACC software for Launch Equipment Test Facility (LETF) testing.

  3. CompHEP: developments and applications

    Science.gov (United States)

    Boos, E. E.; Bunichev, V. E.; Dubinin, M. N.; Ilyin, V. A.; Savrin, V. I.; CompHEP Collaboration

    2017-11-01

    New developments of the CompHEP package and its applications to the top quark and the Higgs boson physics at the LHC collider are reviewed. These developments were motivated mainly by the needs of experimental searches of DO (Tevatron) and CMS (LHC) collaborations where identification of the top quark and the Higgs boson in the framework of the Standard Model (SM) or possible extensions of the SM played an important role. New useful features of the CompHEP Graphics User Interface (GUI) are described.

  4. Localization in Wireless Sensor Networks: A Survey on Algorithms, Measurement Techniques, Applications and Challenges

    Directory of Open Access Journals (Sweden)

    Anup Kumar Paul

    2017-10-01

    Full Text Available Localization is an important aspect in the field of wireless sensor networks (WSNs that has developed significant research interest among academia and research community. Wireless sensor network is formed by a large number of tiny, low energy, limited processing capability and low-cost sensors that communicate with each other in ad-hoc fashion. The task of determining physical coordinates of sensor nodes in WSNs is known as localization or positioning and is a key factor in today’s communication systems to estimate the place of origin of events. As the requirement of the positioning accuracy for different applications varies, different localization methods are used in different applications and there are several challenges in some special scenarios such as forest fire detection. In this paper, we survey different measurement techniques and strategies for range based and range free localization with an emphasis on the latter. Further, we discuss different localization-based applications, where the estimation of the location information is crucial. Finally, a comprehensive discussion of the challenges such as accuracy, cost, complexity, and scalability are given.

  5. Report on the surveys in fiscal 1999. Surveys on practical application of the research achievements; 1999 nendo kenkyu seika no jitsuyoka ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    A number of technological hurdles exist in the process of practically applying the fundamental researches, wherein risks for private business entities to promote the technological development are not at all small. The present surveys are intended to elucidate the actual status as to how a practical application process for technologies is positioned in the series of research and technological development activity floats by private corporations, and what kinds of problems are present, to serve for discussing the way the future supportive environment improvement should be. The 'practical application processes' in private corporations were put into order and analyzed, using as the base the existing study results relative to technological innovation mechanisms. Investigations ere performed on the existing Japanese research and technological development supporting institutions for the practical application processes employed by the private corporations. The result was used for reference of discussing the problems therein. Furthermore, it is indicated that, in the R and D strategies in the U.S.A., profitability is placed as the largest target by means of strengthening the linkage between research and commercialization. This has resulted in decline in the fundamental researches, for which discussions are developed currently. This paper reports investigations on the actual status of business enterprises in the practical application processes. (NEDO)

  6. Environmental Development Plan (EDP): space applications

    International Nuclear Information System (INIS)

    1978-04-01

    This Environmental Development Plan (EDP) identifies and examines the environmental, safety, health, and socioeconomic (ES and H) issues associated with the ongoing DOE Space Applications Program and the associated research, development, and demonstration programs. The EDP presents an ES and H research and development (R/D) program and strategy for timely resolutions of the issues and satisfaction of the associated requirements necessary for precluding impediments to the space nuclear systems technology. The EDP has been limited to the consideration of: (1) space nuclear power system nuclear fuel fabrication; (2) space nuclear power system heat source fabrication; (3) testing of subsystems and assembled systems; (4) R and D in support of space nuclear system development; (5) nuclear system responses to launch and reentry accidents; and (6) nuclear system environmental behavior and recovery

  7. Applications and development trend of radiopharmaceuticals

    International Nuclear Information System (INIS)

    Kim, J.R.

    1978-01-01

    Present status of radiopharmaceuticals applications and the trend of the development are extensively reviewed and discussed. The followings are manifested: a) Among the various radionuclides, those of short lived, accelerator produced, and having moderate radiation energies are becoming popular. b) Diagnosis using various labelled molecules are considered to be the most active field in nuclear medicine. c) Development of radiopharmaceuticals for tumor localization studies is one of the trends. d) The use of various convenient kits of both in-vitro radioligand assay, and in-vivo instant labelling is now an enormous domain in nuclear medicine. A great stride is also made in the development of automation technique. Upon it, an urgent development of some new radiopharmaceuticals having local characteristics is proposed. (author)

  8. Remote Software Application and Display Development

    Science.gov (United States)

    Sanders, Brandon T.

    2014-01-01

    The era of the shuttle program has come to an end, but only to give rise to newer and more exciting projects. Now is the time of the Orion spacecraft, a work of art designed to exceed all previous endeavors of man. NASA is exiting the time of exploration and is entering a new period, a period of pioneering. With this new mission, many of NASAs organizations must undergo a great deal of change and development to support the Orion missions. The Spaceport Command and Control System (SCCS) is the new system that will provide NASA the ability to launch rockets into orbit and thus control Orion and other spacecraft as the goal of populating Mars becomes ever increasingly tangible. Since the previous control system, Launch Processing System (LPS), was primarily designed to launch the shuttles, SCCS was needed as Kennedy Space Center (KSC) reorganized to a multiuser spaceport for commercial flights, providing a more versatile control over rockets. Within SCCS, is the Launch Control System (LCS), which is the remote software behind the command and monitoring of flight and ground system hardware. This internship at KSC has involved two main components in LCS, including Remote Software Application and Display development. The display environment provides a graphical user interface for an operator to view and see if any cautions are raised, while the remote applications are the backbone that communicate with hardware, and then relay the data back to the displays. These elements go hand in hand as they provide monitoring and control over hardware and software alike from the safety of the Launch Control Center. The remote software applications are written in Application Control Language (ACL), which must undergo unit testing to ensure data integrity. This paper describes both the implementation and writing of unit tests in ACL code for remote software applications, as well as the building of remote displays to be used in the Launch Control Center (LCC).

  9. Harassment in workplace among school teachers: development of a survey.

    Science.gov (United States)

    Russo, Andrea; Milić, Ranko; Knezević, Bojana; Mulić, Rosanda; Mustajbegović, Jadranka

    2008-08-01

    To develop a questionnaire on harassment in the workplace among teachers at primary and secondary schools. We analyzed the existing questionnaires on harassment in the workplace and developed a new one was to specifically address harassment of teachers in the public education sector. The questionnaire was then experimentally applied to a sample of 764 primary and secondary school teachers in Split Dalmatia County, Croatia. It included three scales -exposure to harassment, witnessing harassment, and disturbance by harassment. Validity of the three scales was examined by factor analysis. All three scales showed satisfactory metric characteristics: Cronbach alpha coefficient was 0.93 for exposure scale, 0.95 for witnessing scale, and 0.97 for disturbance scale. Out of 764 teachers surveyed, 164 (22.4%) were exposed to and 192 (31.7%) witnessed different kinds of harassment in the previous 12 months. There were significantly more of those who experienced harassment as witnesses (chi(2)(1)=249.301; Pharassment disturbed women more than men (chi(2)(1)=5.27; P=0.022). Those who were exposed to harassment had significantly lower median age (42; range 23-68) than those who were not exposed (45; range 23-65) (U=31401.50; z=2.129; P=0.033). The questionnaire registered wide spectrum of harassment types, indicating the need for continuous monitoring and systematic work on the prevention of these phenomena. The study showed that exposure to harassment is associated with age, indicating that younger teachers should be the target population for detection and prevention of workplace harassment.

  10. Can the Future EnMAP Mission Contribute to Urban Applications? A Literature Survey

    Directory of Open Access Journals (Sweden)

    Andreas Müller

    2011-08-01

    Full Text Available With urban populations and their footprints growing globally, the need to assess the dynamics of the urban environment increases. Remote sensing is one approach that can analyze these developments quantitatively with respect to spatially and temporally large scale changes. With the 2015 launch of the spaceborne EnMAP mission, a new hyperspectral sensor with high signal-to-noise ratio at medium spatial resolution, and a 21 day global revisit capability will become available. This paper presents the results of a literature survey on existing applications and image analysis techniques in the context of urban remote sensing in order to identify and outline potential contributions of the future EnMAP mission. Regarding urban applications, four frequently addressed topics have been identified: urban development and planning, urban growth assessment, risk and vulnerability assessment and urban climate. The requirements of four application fields and associated image processing techniques used to retrieve desired parameters and create geo-information products have been reviewed. As a result, we identified promising research directions enabling the use of EnMAP for urban studies. First and foremost, research is required to analyze the spectral information content of an EnMAP pixel used to support material-based land cover mapping approaches. This information can subsequently be used to improve urban indicators, such as imperviousness. Second, we identified the global monitoring of urban areas as a promising field of investigation taking advantage of EnMAP’s spatial coverage and revisit capability. However, owing to the limitations of EnMAPs spatial resolution for urban applications, research should also focus on hyperspectral resolution enhancement to enable retrieving material information on sub-pixel level.

  11. Research and development of system to utilize photovoltaic energy. Survey on the specific purpose modules; Taiyoko hatsuden riyo system no kenkyu kaihatsu. Taiyoto module ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    This paper reports the survey results on the specific purpose modules for photovoltaic power generation in fiscal 1994. (1) On the feasibility survey on new application fields, it was clarified that photovoltaic power generation is applicable to extensive areas such as farmland, road, railway and public facility as latent demand sites. (2) On the optimum modules for various specific purposes, the structure, production method, cost estimation and issues of various modules were studied for desert, wasteland, coast, ocean, river, embankment, railway, road, mobile facility and arcade. (3) On the survey on new materials and material development, various conventional materials and materials promising for required performance were surveyed for every application. (4) On the survey on technology trends, the survey members participated in the first international photovoltaic energy conversion conference and the photovoltaic power generation workshop, while the members held the 1st-5th specific purpose module subcommittees. 1 tab.

  12. General survey of applications which require actinide nuclear data

    International Nuclear Information System (INIS)

    Raman, S.

    1976-01-01

    This review paper discusses the actinide waste problem, the buildup of toxic isotopes in the fuel, the neutron activity associated with irradiated fuel, the 252 Cf buildup problem, and the production of radioisotope power sources as broad areas that require actinide cross-section data. Decay data enter into the area of radiological safety and health physics. This paper also discusses a few cross-section measurements in progress at the Oak Ridge Electron Linear Accelerator. The availability of actinide samples through the Transuranium Program at Oak Ridge is discussed in considerable detail. The present data status with respect to the various applications is reviewed along with recommendations for improving the data base

  13. Survey and evaluation of aging risk assessment methods and applications

    International Nuclear Information System (INIS)

    Sanzo, D.; Kvam, P.; Apostolakis, G.; Wu, J.; Milici, T.; Ghoniem, N.; Guarro, S.

    1994-11-01

    The US Nuclear Regulatory Commission initiated the nuclear power plant aging research program about 6 years ago to gather information about nuclear power plant aging. Since then, this program has collected a significant amount of information, largely qualitative, on plant aging and its potential effects on plant safety. However, this body of knowledge has not yet been integrated into formalisms that can be used effectively and systematically to assess plant risk resulting from aging, although models for assessing the effect of increasing failure rates on core damage frequency have been proposed. This report surveys the work on the aging of systems, structures, and components (SSCs) of nuclear power plants, as well as associated data bases. We take a critical look at the need to revise probabilistic risk assessments (PRAs) so that they will include the contribution to risk from plant aging, the adequacy of existing methods for evaluating this contribution, and the adequacy of the data that have been used in these evaluation methods. We identify a preliminary framework for integrating the aging of SSCs into the PRA and include the identification of necessary data for such an integration

  14. Neutral-beam-heating applications and development

    International Nuclear Information System (INIS)

    Menon, M.M.

    1981-01-01

    The technique of heating the plasma in magnetically confined fusion devices by the injection of intense beams of neutral atoms is described. The basic principles governing the physics of neutral beam heating and considerations involved in determining the injection energy, power, and pulse length required for a fusion reactor are discussed. The pertinent experimental results from various fusion devices are surveyed to illustrate the efficacy of this technique. The second part of the paper is devoted to the technology of producing the neutral beams. A state-of-the-art account o the development of neutral injectors is presented, and the prospects for utilizing neutral injection to heat the plasma in a fusion reactor are examined

  15. CCD developed for scientific application by Hamamatsu

    CERN Document Server

    Miyaguchi, K; Dezaki, J; Yamamoto, K

    1999-01-01

    We have developed CCDs for scientific applications that feature a low readout noise of less than 5 e-rms and low dark current of 10-25 pA/cm sup 2 at room temperature. CCDs with these characteristics will prove extremely useful in applications such as spectroscopic measurement and dental radiography. In addition, a large-area CCD of 2kx4k pixels and 15 mu m square pixel size has recently been completed for optical use in astronomical observations. Applications to X-ray astronomy require the most challenging device performance in terms of deep depletion, high CTE, and focal plane size, among others. An abuttable X-ray CCD, having 1024x1024 pixels and 24 mu m square pixel size, is to be installed in an international space station (ISS). We are now striving to achieve the lowest usable cooling temperature by means of a built-in TEC with limited power consumption. Details on the development status are described in this report. We would also like to present our future plans for a large active area and deep depleti...

  16. Neutron activation analysis: recent developments and applications

    International Nuclear Information System (INIS)

    Acharya, R.; Reddy, A.V.R.

    2012-01-01

    Neutron activation analysis (NAA) is a powerful isotope specific nuclear analytical technique for simultaneous determination of major to trace elemental concentrations in diverse matrices. NAA is associated with high analytical sensitivities and low detection limits (ppm to ppb) due to utilization of high neutron flux from research reactors and high efficiency high resolution gamma ray spectrometry. Elemental concentrations are determined either by conventional NAA using relative method or by single comparator method of NAA (k 0 -NAA). Since 1994, Radiochemistry Division is actively engaged in developments and applications of k 0 -based NAA and Prompt Gamma ray NAA (PGNAA) methods for compositional characterization of materials, in addition to conventional instrumental NAA (INAA) and chemical NAA (CNAA) methods for total as well as speciation studies. The article briefly summarizes developments of k 0 based method of NAA using an external single comparator (k 0 -NAA) and an internal monostandard (lM-NAA) and PGNAA and their applications to small as well as large size samples. The article also briefly highlights the application of INAA and chemical NAA (CNAA) for speciation studies of arsenic and iodine in environmental and food samples respectively and bioaccesibility of selenium in food samples and trace elements wheatgrass samples

  17. Nuclear plant analyzer development and analysis applications

    International Nuclear Information System (INIS)

    Laats, E.T.

    1984-01-01

    The Nuclear Plant Analyzer (NPA) is being developed as the U.S. Nuclear Regulatory Commission's (NRC's) state of the art safety analysis and engineering tool to address key nuclear plant safety issues. The NPA integrates the NRC's computerized reactor behavior simulation codes such as RELAP5 and TRAC-BWR, both of which are well-developed computer graphics programs, and large repositories of reactor design and experimental data. Utilizing the complex reactor behavior codes as well as the experiment data repositories enables simulation applications of the NPA that are generally not possible with more simplistic, less mechanistic reactor behavior codes. These latter codes are used in training simulators or with other NPA-type software packages and are limited to displaying calculated data only. This paper describes four applications of the NPA in assisting reactor safety analyses. Two analyses evaluated reactor operating procedures, during off-normal operation, for a pressurized water reactor (PWR) and a boiling water reactor (BWR), respectively. The third analysis was performed in support of a reactor safety experiment conducted in the Semiscale facility. The final application demonstrated the usefulness of atmospheric dispersion computer codes for site emergency planning purposes. An overview of the NPA and how it supported these analyses are the topics of this paper

  18. Polish Vocabulary Development in 2-Year-Olds: Comparisons with English Using the Language Development Survey

    Science.gov (United States)

    Rescorla, Leslie; Constants, Holly; Bialecka-Pikul, Marta; Stepien-Nycz, Malgorzata; Ochal, Anna

    2017-01-01

    Purpose: The objective of this study was to compare vocabulary size and composition in 2-year-olds learning Polish or English as measured by the Language Development Survey (LDS; Rescorla, 1989). Method: Participants were 199 Polish toddlers (M = 24.14 months, SD = 0.35) and 422 U.S. toddlers (M = 24.69 months, SD = 0.78). Results: Test-retest…

  19. Survey of agents and techniques applicable to the solidification of low-level radioactive wastes

    International Nuclear Information System (INIS)

    Fuhrmann, M.; Neilson, R.M. Jr.; Colombo, P.

    1981-12-01

    A review of the various solidification agents and techniques that are currently available or potentially applicable for the solidification of low-level radioactive wastes is presented. An overview of the types and quantities of low-level wastes produced is presented. Descriptions of waste form matrix materials, the wastes types for which they have been or may be applied and available information concerning relevant waste form properties and characteristics follow. Also included are descriptions of the processing techniques themselves with an emphasis on those operating parameters which impact upon waste form properties. The solidification agents considered in this survey include: hydraulic cements, thermoplastic materials, thermosetting polymers, glasses, synthetic minerals and composite materials. This survey is part of a program supported by the United States Department of Energy's Low-Level Waste Management Program (LLWMP). This work provides input into LLWMP efforts to develop and compile information relevant to the treatment and processing of low-level wastes and their disposal by shallow land burial

  20. Survey of agents and techniques applicable to the solidification of low-level radioactive wastes

    Energy Technology Data Exchange (ETDEWEB)

    Fuhrmann, M.; Neilson, R.M. Jr.; Colombo, P.

    1981-12-01

    A review of the various solidification agents and techniques that are currently available or potentially applicable for the solidification of low-level radioactive wastes is presented. An overview of the types and quantities of low-level wastes produced is presented. Descriptions of waste form matrix materials, the wastes types for which they have been or may be applied and available information concerning relevant waste form properties and characteristics follow. Also included are descriptions of the processing techniques themselves with an emphasis on those operating parameters which impact upon waste form properties. The solidification agents considered in this survey include: hydraulic cements, thermoplastic materials, thermosetting polymers, glasses, synthetic minerals and composite materials. This survey is part of a program supported by the United States Department of Energy's Low-Level Waste Management Program (LLWMP). This work provides input into LLWMP efforts to develop and compile information relevant to the treatment and processing of low-level wastes and their disposal by shallow land burial.

  1. Fiscal 1995 geothermal development promotion survey. Natural environment survey report; 1995 nendo chinetsu kaihatsu sokushin chosa. Shizen kankyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In Candidate C area for the geothermal development survey, the natural environment was surveyed and `the secondary landscape assessment` was summed up in which places proposed for drilling of large-size wells and for construction of power generation facilities are extracted and a simulation of the landscape is conducted. The area for survey is the Shiramizu-gawa region in the south of Lake Akan, Akan-cho, Akan-gun, Hokkaido. The field survey was carried out about three items of landscape, plants and animals during the June-November period, 1995. As to the flora, diverse florae including vegetation unique to alpine areas, wetlands, and fumarole surrounding areas were found in the region, which is covered with summer-green broad-leaved forests or mixed forests of coniferous and broad-leaved trees. As to the fauna, faunae inhabitant of the highly natural forests were found including black woodpeckers and mountain hawk eagles. As a result of studying the places proposed for geothermal development from the above-mentioned survey, two places were picked up in the west of the survey area, where geothermal development is comparatively less influential in the natural environment and landscape and there is a high locational adaptability. 19 refs., 56 figs., 49 tabs.

  2. Survey indicated that core outcome set development is increasingly including patients, being conducted internationally and using Delphi surveys.

    Science.gov (United States)

    Biggane, Alice M; Brading, Lucy; Ravaud, Philippe; Young, Bridget; Williamson, Paula R

    2018-02-17

    There are numerous challenges in including patients in a core outcome set (COS) study, these can vary depending on the patient group. This study describes current efforts to include patients in the development of COS, with the aim of identifying areas for further improvement and study. Using the COMET database, corresponding authors of COS projects registered or published from 1 January 2013 to 2 February 2017 were invited via a personalised email to participate in a short online survey. The survey and emails were constructed to maximise the response rate by following the academic literature on enhancing survey responses. Personalised reminder emails were sent to non-responders. This survey explored the frequency of patient input in COS studies, who was involved, what methods were used and whether or not the COS development was international. One hundred and ninety-two COS developers were sent the survey. Responses were collected from 21 February 2017 until 7 May 2017. One hundred and forty-six unique developers responded, yielding a 76% response rate and data in relation to 195 unique COSs (as some developers had worked on multiple COSs). Of focus here are their responses regarding 162 COSs at the published, completed or ongoing stages of development. Inclusion of patient participants was indicated in 87% (141/162) of COSs in the published completed or ongoing stages and over 94% (65/69) of ongoing COS projects. Nearly half (65/135) of COSs included patient participants from two or more countries and 22% (30/135) included patient participants from five or more countries. The Delphi survey was reported as being used singularly or in combination with other methods in 85% (119/140) of projects. Almost a quarter (16/65) of ongoing studies reported using a combination of qualitative interviews, Delphi survey and consensus meeting. These findings indicated that the Delphi survey is the most popular method of facilitating patient participation, while the combination of

  3. Development of clinical application of radiation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Mi Sook; Yoo, Seoung Yul; Yoo, Hyung Jun [and others

    2000-04-01

    The aim is to develop the clinical radiation therapy techniques, which increase local control and cure rate of cancer. The contents were 1. technique of stereotactic radiotherapy 2. technique of intraoperative radiation therapy(IORT) 3. technique of fractionated radiotherapy 4. technique of 3D conformal therapy 5. chemoradiotherapy in lung cancer, rectal cancer and biliopancreatic cancer 6. network based information communication system of radiation oncology 7. animal studies for the best application of chemoradiotherapy and for elucidating mechanism of slide effect in radiotherapy. The results were 1. completion of quality assurance protocol, frame and mounting system 2. completion of applicator of IORT 3. clinical protocol of fractionated radiotherapy 4. clinical protocol of 3D conformal therapy for brain, head and neck, breast and lung cancer 5. completion of multimodality treatment protocol for lung, rectal and biliopancreatic cancer 6. completion of database system for patient information and simulation image 7. standardization of estimation for radiation induced pneumonitis in animal model. Future plans are (1) developed fractionated stereotactic radiotherapy system will be commercialized (2) developed applicator of brachytherapy for IORT will be commercialized (3) 3D conformal therapy will increase local control rate for brain tumor and decrease complications such as zerostomia after treatment for nasopharygeal cancer (4) training manpower and skills for randomized clinical trial (5) suggest possibility of clinical usefulness of oral 5-fluorouracil (6) to provide basic technique for electric chart (7) promote developing database system for image information (8) also in view of double edge sword effect of NO, it is possible to modify the NO production from irradiation to increase the tolerance to radiation.

  4. Development of clinical application of radiation

    International Nuclear Information System (INIS)

    Kim, Mi Sook; Yoo, Seoung Yul; Yoo, Hyung Jun

    2000-04-01

    The aim is to develop the clinical radiation therapy techniques, which increase local control and cure rate of cancer. The contents were 1. technique of stereotactic radiotherapy 2. technique of intraoperative radiation therapy(IORT) 3. technique of fractionated radiotherapy 4. technique of 3D conformal therapy 5. chemoradiotherapy in lung cancer, rectal cancer and biliopancreatic cancer 6. network based information communication system of radiation oncology 7. animal studies for the best application of chemoradiotherapy and for elucidating mechanism of slide effect in radiotherapy. The results were 1. completion of quality assurance protocol, frame and mounting system 2. completion of applicator of IORT 3. clinical protocol of fractionated radiotherapy 4. clinical protocol of 3D conformal therapy for brain, head and neck, breast and lung cancer 5. completion of multimodality treatment protocol for lung, rectal and biliopancreatic cancer 6. completion of database system for patient information and simulation image 7. standardization of estimation for radiation induced pneumonitis in animal model. Future plans are 1) developed fractionated stereotactic radiotherapy system will be commercialized 2) developed applicator of brachytherapy for IORT will be commercialized 3) 3D conformal therapy will increase local control rate for brain tumor and decrease complications such as zerostomia after treatment for nasopharygeal cancer 4) training manpower and skills for randomized clinical trial 5) suggest possibility of clinical usefulness of oral 5-fluorouracil 6) to provide basic technique for electric chart 7) promote developing database system for image information 8) also in view of double edge sword effect of NO, it is possible to modify the NO production from irradiation to increase the tolerance to radiation

  5. Exploring ethical considerations for the use of biological and physiological markers in population-based surveys in less developed countries

    Directory of Open Access Journals (Sweden)

    Hyder Adnan A

    2005-11-01

    Full Text Available Abstract Background The health information needs of developing countries increasingly include population-based estimates determined by biological and physiological measures. Collection of data on these biomarkers requires careful reassessment of ethical standards and procedures related to issues of safety, informed consent, reporting, and referral policies. This paper reviews the survey practices of health examination surveys that have been conducted in developed nations and discusses their application to similar types of surveys proposed for developing countries. Discussion The paper contends that a unitary set of ethical principles should be followed for surveys around the world that precludes the danger of creating double standards (and implicitly lowers standards for work done in developing countries. Global ethical standards must, however, be interpreted in the context of the unique historical and cultural context of the country in which the work is being done. Factors that influence ethical considerations, such as the relationship between investigators in developed and developing countries are also discussed. Summary The paper provides a set of conclusions reached through this discussion and recommendations for the ethical use of biomarkers in populations-based surveys in developing countries.

  6. Nuclear plant analyzer development and analysis applications

    International Nuclear Information System (INIS)

    Laats, E.T.

    1984-10-01

    The Nuclear Plant Analyzer (NPA) is being developed as the US Nuclear Regulatory Commission's (NRC's) state of the art safety analysis and engineering tool to address key nuclear plant safety issues. This paper describes four applications of the NPA in assisting reactor safety analyses. Two analyses evaluated reactor operating procedures, during off-normal operation, for a pressurized water reactor (PWR) and a boiling water reactor (BWR), respectively. The third analysis was performed in support of a reactor safety experiment conducted in the Semiscale facility. The final application demonstrated the usefulness of atmospheric dispersion computer codes for site emergency planning purposes. An overview of the NPA and how it supported these analyses are the topics of this paper

  7. ATLAS: Applications experiences and further developments

    International Nuclear Information System (INIS)

    Beraha, D.; Pointner, W.; Voggenberger, T.

    1999-01-01

    An overview of the plant analyzer ATLAS is given, describing its configuration, the process models and the supplementary modules which enhance the functionality of ATLAS for a range of applications in reactor safety analysis. These modules include the Reliability Advisory System, which supports the user by information from probabilistic safety analysis, the Procedure Analysis for development and test of emergency operating procedures, and a diagnostic system for steam-generator tube rupture. The development of plant specific analysers for various power plants is described, and the user experience related. Finally, the intended further development directions are discussed, centering on a tracking simulator, the migration of the visualisation system to Windows NT, and the construction of the Analysis Center as a multimedia environment for the operation of ATLAS. (author)

  8. HOMOMORPHIC ENCRYPTION: CLOUD COMPUTING SECURITY AND OTHER APPLICATIONS (A SURVEY

    Directory of Open Access Journals (Sweden)

    A. I. Trubei

    2015-01-01

    Full Text Available Homomorphic encryption is a form of encryption which allows specific types of computations to be carried out on cipher text and to obtain an encrypted result which matches the result of operations performed on the plain text. The article presents a basic concept of the homomorphic encryption and various encryption algorithms in accordance with the fundamental properties of the homomorphic encryption. The examples of various principles and properties of homomorphic encryption, some homomorphic algorithms using asymmetric key systems such as RSA, ElGamal, Paillier algorithms as well as various homomorphic encryption schemes are given. Prospects of homomorphic encryption application in the field of secure cloud computing, electronic voting, cipher text searching, encrypted mail filtering, mobile cipher and secure feedback systems are considered.

  9. The geographic applications program of the U. S. Geological Survey

    Science.gov (United States)

    Gerlach, Arch C.

    1969-01-01

    The fundamental objective of modern Geography is to improve man's level of living through a better understanding of man-environment inter actions. Related goals of the USGS program for applications of remote sensor data to Geographical research are: (1) the analysis and improvement of land use, with special emphasis on urban problems; and (2) more effective use of the total available energy budget, including insolation, mineral fuels, atomic energy, human resources, and mental energy, all of which are integrated into man-environment interactions. The collection of data through remote sensors in air craft and spacecraft is financed largely by funds from NASA, and is part of the much broader EROS Program of the Department of the Interior. Results to date have achieved much toward the identification of remote sensor signatures for Earth features and human activities, and toward evaluation of instruments for collecting essential information.

  10. Harassment in Workplace Among School Teachers: Development of Survey

    Science.gov (United States)

    Russo, Andrea; Milić, Ranko; Knežević, Bojana; Mulić, Rosanda; Mustajbegović, Jadranka

    2008-01-01

    Aim To study the incidence of harassment in the workplace among teachers at primary and secondary schools. Methods We analyzed the existing questionnaires on harassment in the workplace and developed a new one was to specifically address harassment of teachers in the public education sector. The questionnaire was then experimentally applied to a sample of 764 primary and secondary school teachers in Split Dalmatia County, Croatia. It included three scales –exposure to harassment, witnessing harassment, and disturbance by harassment. Validity of the three scales was examined by factor analysis. Results All three scales showed satisfactory metric characteristics: Cronbach α coefficient was 0.93 for exposure scale, 0.95 for witnessing scale, and 0.97 for disturbance scale. Out of 764 teachers surveyed, 164 (22.4%) were exposed to and 192 (31.7%) witnessed different kinds of harassment in the previous 12 months. There were significantly more of those who experienced harassment as witnesses (χ21 = 249.301; P harassment disturbed women more than men (χ21 = 5.27; P = 0.022). Those who were exposed to harassment had significantly lower median age (42; range 23-68) than those who were not exposed (45; range 23-65) (U = 31401.50; z = 2.129; P = 0.033). Conclusion The questionnaire registered wide spectrum of harassment types, indicating the need for continuous monitoring and systematic work on the prevention of these phenomena. The study showed that exposure to harassment is associated with age, indicating that younger teachers should be the target population for detection and prevention of workplace harassment. PMID:18717002

  11. Exploring the Application of Volunteered Geographic Information to Catchment Management: a Survey Approach

    Science.gov (United States)

    Paudyal, D. R.; McDougall, K.; Apan, A.

    2012-07-01

    The participation and engagement of grass-root level community groups and citizens for natural resource management has a long history. With recent developments in ICT tools and spatial technology, these groups are seeking a new opportunity to manage natural resource data. There are lot of spatial information collected/generated by landcare groups, land holders and other community groups at the grass-root level through their volunteer initiatives. State government organisations are also interested in gaining access to this spatial data/information and engaging these groups to collect spatial information under their mapping programs. The aim of this paper is to explore the possible utilisation of volunteered geographic information (VGI) for catchment management activities. This research paper discusses the importance of spatial information and spatial data infrastructure (SDI) for catchment management and the emergence of VGI. A conceptual framework has been developed to illustrate how these emerging spatial information applications and various community volunteer activities can contribute to a more inclusive spatial data infrastructure (SDI) development at local level. A survey of 56 regional NRM bodies in Australia was utilised to explore the current community-driven volunteer initiatives for NRM activities and the potential of utilisation of VGI initiatives for NRM decision making process. This research paper concludes that VGI activities have great potential to contribute to SDI development at the community level to achieve better natural resource management (NRM) outcomes.

  12. Prospects of application of survey satellite image for meteorology

    Science.gov (United States)

    Kapochkina, A. B.; Kapochkin, B. B.; Kucherenko, N. V.

    The maximal interest is represented with the information from geostationary satellites. These satellites repeat shootings the chosen territories, allowing to study dynamics of images. Most interesting shootings in IR a range. Studying of survey image is applied to studying linear elements of clouds (LEC). It is established, that "LEC " arise only above breaks of an earth's crust. In research results of the complex analysis of the satellite data, hydrometeorological supervision, seismicity, supervision over deformations of a surface of the Earth are used. It is established that before formation "LEC " in a ground layer arise anomalies of temperature and humidity. The situation above Europe 16 May, 2001 is considered. "LEC " in Europe block carry of air weights from the west to the east. Synoptic conditions above the Great Britain July, 7-10, 2000 is considered. Moving "LEC" trace distribution of deformation waves to an earth's crust. Satellite shootings Europe before earthquake in Greece 14.08.2003 are considered. These days ground supervision were conducted and the data of the geostationary satellite were analyzed. During moving "LEC " occur failures (destruction houses & of gas mains), earthquake. The situation above Iberian peninsula 12-16.11.2001 is considered. "LEC" arose before flooding in Europe. The situation before flooding in Germany June, 6-8, 2002 and flooding on the river Kuban June, 16-23, 2002 is considered. In case of occurrence of tectonic compression of an earth's crust there are "LEC ", tracer intensive movements of air upwards and downwards above negative and positive anomalies of the form of a terrestrial surface, accordingly. Such meteorological situations are dangerous to flights of aircraft, the fast gravitational anomalies influencing into orbits of movement of satellites trace. The situation above equatorial Atlantic 26.03.2003 years is considered. At tectonic compression of continental scale overcast covers the whole continents for more

  13. Compact neutron generator development and applications

    International Nuclear Information System (INIS)

    Leung, Ka-Ngo; Reijonen, Jani; Gicquel, Frederic; Hahto, Sami; Lou, Tak-Pui

    2004-01-01

    The Plasma and Ion Source Technology Group at the Lawrence Berkeley National Laboratory has been engaging in the development of high yield compact neutron generators for the last ten years. Because neutrons in these generators are formed by using either D-D, T-T or D-T fusion reaction, one can produce either mono-energetic (2.4 MeV or 14 MeV) or white neutrons. All the neutron generators being developed by our group utilize 13.5 MHz RF induction discharge to produce a pure deuterium or a mixture of deuterium-tritium plasma. As a result, ion beams with high current density and almost pure atomic ions can be extracted from the plasma source. The ion beams are accelerated to ∼100 keV and neutrons are produced when the beams impinge on a titanium target. Neutron generators with different configurations and sizes have been designed and tested at LBNL. Their applications include neutron activation analysis, oil-well logging, boron neutron capture therapy, brachytherapy, cargo and luggage screening. A novel small point neutron source has recently been developed for radiography application. The source size can be 2 mm or less, making it possible to examine objects with sharper images. The performance of these neutron generators will be described in this paper

  14. Application of UV Imaging in Formulation Development.

    Science.gov (United States)

    Sun, Yu; Østergaard, Jesper

    2017-05-01

    Efficient drug delivery is dependent on the drug substance dissolving in the body fluids, being released from dosage forms and transported to the site of action. A fundamental understanding of the interplay between the physicochemical properties of the active compound and pharmaceutical excipients defining formulation behavior after exposure to the aqueous environments and pharmaceutical performance is critical in pharmaceutical development, manufacturing and quality control of drugs. UV imaging has been explored as a tool for qualitative and quantitative characterization of drug dissolution and release with the characteristic feature of providing real-time visualization of the solution phase drug transport in the vicinity of the formulation. Events occurring during drug dissolution and release, such as polymer swelling, drug precipitation/recrystallization, or solvent-mediated phase transitions related to the structural properties of the drug substance or formulation can be monitored. UV imaging is a non-intrusive and simple-to-operate analytical technique which holds potential for providing a mechanistic foundation for formulation development. This review aims to cover applications of UV imaging in the early and late phase pharmaceutical development with a special focus on the relation between structural properties and performance. Potential areas of future advancement and application are also discussed.

  15. Development of structural steels for nuclear application

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Jun Hwa; Chi, S. H.; Ryu, W. S.; Lee, B. S.; Kim, D. H.; Kim, J. H.; Oh, Y. J.; Byun, T. S.; Yoon, J. H.; Park, D. K.; Oh, J. M.; Cho, H. D.; Kim, H.; Kim, H. D.; Kang, S. S.; Kim, J. W.; Ahn, S. B.

    1997-08-01

    To established the bases of nuclear structural material technologies, this study was focused on the localization and improvement of nuclear structural steels, the production of material property data, and technology developments for integrity evaluation. The important test and analysis technologies for material integrity assessment were developed, and the materials properties of the pressure vessel steels were evaluated systematically on the basis of those technologies, they are microstructural characteristics, tensile and indentation deformation properties, impact properties, and static and dynamic fracture toughness, fatigue and corrosion fatigue etc. Irradiation tests in the research reactors were prepared or completed to obtain the mechanical properties of irradiated materials. The improvement of low alloy steel was also attempted through the comparative study on the manufacturing processes, computer assisted alloy and process design, and application of the inter critical heat treatment. On the other hand, type 304 stainless steels for reactor internals were developed and tested successfully. High strength type 316LN stainless steels for reactor internals were developed and the microstructural characteristics, corrosion resistance, mechanical properties at high temperatures, low cycle fatigue property etc. were tested and analyzed in the view point of the effect of nitrogen. Type 347 stainless steels with high corrosion resistance and toughness for pipings and tubes and low-activated Cr-Mn steels were also developed and their basic properties were evaluated. Finally, the martensitic stainless steels for turbine blade were developed and tests. (author). 242 refs., 100 tabs., 304 figs.

  16. Development of structural steels for nuclear application

    International Nuclear Information System (INIS)

    Hong, Jun Hwa; Chi, S. H.; Ryu, W. S.; Lee, B. S.; Kim, D. H.; Kim, J. H.; Oh, Y. J.; Byun, T. S.; Yoon, J. H.; Park, D. K.; Oh, J. M.; Cho, H. D.; Kim, H.; Kim, H. D.; Kang, S. S.; Kim, J. W.; Ahn, S. B.

    1997-08-01

    To established the bases of nuclear structural material technologies, this study was focused on the localization and improvement of nuclear structural steels, the production of material property data, and technology developments for integrity evaluation. The important test and analysis technologies for material integrity assessment were developed, and the materials properties of the pressure vessel steels were evaluated systematically on the basis of those technologies, they are microstructural characteristics, tensile and indentation deformation properties, impact properties, and static and dynamic fracture toughness, fatigue and corrosion fatigue etc. Irradiation tests in the research reactors were prepared or completed to obtain the mechanical properties of irradiated materials. The improvement of low alloy steel was also attempted through the comparative study on the manufacturing processes, computer assisted alloy and process design, and application of the inter critical heat treatment. On the other hand, type 304 stainless steels for reactor internals were developed and tested successfully. High strength type 316LN stainless steels for reactor internals were developed and the microstructural characteristics, corrosion resistance, mechanical properties at high temperatures, low cycle fatigue property etc. were tested and analyzed in the view point of the effect of nitrogen. Type 347 stainless steels with high corrosion resistance and toughness for pipings and tubes and low-activated Cr-Mn steels were also developed and their basic properties were evaluated. Finally, the martensitic stainless steels for turbine blade were developed and tests. (author). 242 refs., 100 tabs., 304 figs

  17. Development of superconductor application technology -Advanced nuclear materials development-

    International Nuclear Information System (INIS)

    Hong, Gyee Won; Won, Dong Yeon; Lee, Hui Gyun; Lee, Ho Jin; Kim, Chan Joong; Park, Soon Dong; Kim, Uh Kon; Kim, Ki Baek; Kwon, Seon Chil; Kim, Yeon Soo; Lim, Dae Ho; Kim, Jong Jin

    1994-06-01

    Formation of oxide superconducting phase, fabrication of superconducting wire, design and fabrication of precise superconducting magnet were studied for developing superconductor application technique. The CeO 2 addition reduced the particle size of Y 2 BaCuO 5 trapped in the matrix after the melt-texture growth. The anomally is not observed at low temperature, which indicates that the oxygen deficiency is not effective flux pinning site at these temperature. Powder-in-powder method was developed to make superconducting wire. The stacking method for bonding the high Tc superconducting tapes was developed and proto-type current lead was fabricated by this technique. The precise superconducting coil was designed and fabricated. The required 4.02tesla was obtained on 139 A. The field deviation along the z axis of 5 cm was below 10 ppm when using 4 terms of shim cols. (Author)

  18. Development of PEFC for transportable applications

    Energy Technology Data Exchange (ETDEWEB)

    Maeda, Hideo; Fuklumoto, Hisatoshi; Mitsuda, Kenro [Mitsubishi Electric Corp., Hyogo (Japan)] [and others

    1996-12-31

    Since FY1992, we have been developing PEFC technologies under NEDO`s R&D program. High power density and rapid start-up are essential requirements for transportable applications. Also, if reformed gas is used as fuel, the prevention of CO poisoning and improvement of response to loading are essential. In this paper, methods to increase the effective surface area of a cell, start-up and endurance test results, the study of CO poisoning with a pulse electrolyzing method and the demonstration of a hydrogen recovery subsystem are presented.

  19. Nuclear analytical chemistry: recent developments and applications

    International Nuclear Information System (INIS)

    Acharya, R.

    2013-01-01

    Recent R and D studies on Nuclear Analytical Chemistry utilizing techniques like Neutron Activation Analysis (NAA), Prompt Gamma-ray NAA (PGNAA), Particle Induced Gamma Ray and X-Ray Emission (PICE/PIXE) for compositional analysis of materials have been summarized. The work includes developments and applications of (i) single comparator NAA, called as k 0 -NAA, (ii) k 0 -based internal monostandard NAA (IM-NAA), (iii) k 0 -based prompt gamma ray NAA (PGNAA) and (iv) instrumental NAA using thermal and epithermal neutrons and (v) PIGE and PIXE methods using proton beam for low Z and medium Z elements, respectively. (author)

  20. Shale oil specialty markets: Screening survey for United States applications

    Energy Technology Data Exchange (ETDEWEB)

    1987-12-01

    EG and G requested J. E. Sinor Consultants Inc. to carry out an initial screening study on the possibilities for producing specialty chemicals from oil shale. Raw shale oil is not an acceptable feedstock to refineries and there are not enough user of heavy fuel oil in the western oil shale region to provide a dependable market. The only alternatives are to hydrotreat the oil, or else ship it long distances to a larger market area. Either of these alternatives results in a cost penalty of several dollars per barrel. Instead of attempting to enter the large-volume petroleum products market, it was hypothesized that a small shale oil facility might be able to produce specialty chemicals with a high enough average value to absorb the high costs of shipping small quantities to distant markets and still provide a higher netback to the plant site than sales to the conventional petroleum products market. This approach, rather than attempting to refine shale oil or to modify its characteristics to satisfy the specifications for petroleum feedstocks or products, focuses instead on those particular characteristics which distinguish shale oil from petroleum, and attempts to identify applications which would justify a premium value for those distinctive characteristics. Because byproducts or specialty chemicals production has been a prominent feature of oil shale industries which have flourished for periods of time in various countries, a brief review of those industries provides a starting point for this study. 9 figs., 32 tabs.

  1. Applications of Spatial Features in CBIR : A Survey

    OpenAIRE

    R. Priyatharshini; Surendernath S.P; S.Chitrakala

    2013-01-01

    With advances in the computer technology and the World Wide Web there has been an explosion in the amount and complexity of multimedia data that are generated, stored, transmitted, analyzed, and accessed. In order to extract useful information from this huge amount of data, many content based image retrieval (CBIR) systems have been developed in the last decade. A typical CBIR system captures image features that represent image properties such as color, texture, or shape of obj...

  2. Challenges in the development of magnetic particles for therapeutic applications.

    Science.gov (United States)

    Barry, Stephen E

    2008-09-01

    Certain iron-based particle formulations have useful magnetic properties that, when combined with low toxicity and desirable pharmacokinetics, encourage their development for therapeutic applications. This mini-review begins with background information on magnetic particle use as MRI contrast agents and the influence of material size on pharmacokinetics and tissue penetration. Therapeutic investigations, including (1) the loading of bioactive materials, (2) the use of stationary, high-gradient (HG) magnetic fields to concentrate magnetic particles in tissues or to separate material bound to the particles from the body, and (3) the application of high power alternating magnetic fields (AMF) to generate heat in magnetic particles for hyperthermic therapeutic applications are then surveyed. Attention is directed mainly to cancer treatment, as selective distribution to tumors is well-suited to particulate approaches and has been a focus of most development efforts. While magnetic particles have been explored for several decades, their use in therapeutic products remains minimal; a discussion of future directions and potential ways to better leverage magnetic properties and to integrate their use into therapeutic regimens is discussed.

  3. Recent Survey and Application of the simSUNDT Software

    Science.gov (United States)

    Persson, G.; Wirdelius, H.

    2010-02-01

    The simSUNDT software is based on a previous developed program (SUNDT). The latest version has been customized in order to generate realistic synthetic data (including a grain noise model), compatible with a number of off-line analysis software. The software consists of a Windows®-based preprocessor and postprocessor together with a mathematical kernel (UTDefect), dealing with the actual mathematical modeling. The model employs various integral transforms and integral equation and enables simulations of the entire ultrasonic testing situation. The model is completely three-dimensional though the simulated component is two-dimensional, bounded by the scanning surface and a planar back surface as an option. It is of great importance that inspection methods that are applied are proper validated and that their capability of detection of cracks and defects are quantified. In order to achieve this, statistical methods such as Probability of Detection (POD) often are applied, with the ambition to estimate the detectability as a function of defect size. Despite the fact that the proposed procedure with the utilization of test pieces is very expensive, it also tends to introduce a number of possible misalignments between the actual NDT situation that is to be performed and the proposed experimental simulation. The presentation will describe the developed model that will enable simulation of a phased array NDT inspection and the ambition to use this simulation software to generate POD information. The paper also includes the most recent developments of the model including some initial experimental validation of the phased array probe model.

  4. Collaborative development of predictive toxicology applications.

    Science.gov (United States)

    Hardy, Barry; Douglas, Nicki; Helma, Christoph; Rautenberg, Micha; Jeliazkova, Nina; Jeliazkov, Vedrin; Nikolova, Ivelina; Benigni, Romualdo; Tcheremenskaia, Olga; Kramer, Stefan; Girschick, Tobias; Buchwald, Fabian; Wicker, Joerg; Karwath, Andreas; Gütlein, Martin; Maunz, Andreas; Sarimveis, Haralambos; Melagraki, Georgia; Afantitis, Antreas; Sopasakis, Pantelis; Gallagher, David; Poroikov, Vladimir; Filimonov, Dmitry; Zakharov, Alexey; Lagunin, Alexey; Gloriozova, Tatyana; Novikov, Sergey; Skvortsova, Natalia; Druzhilovsky, Dmitry; Chawla, Sunil; Ghosh, Indira; Ray, Surajit; Patel, Hitesh; Escher, Sylvia

    2010-08-31

    OpenTox provides an interoperable, standards-based Framework for the support of predictive toxicology data management, algorithms, modelling, validation and reporting. It is relevant to satisfying the chemical safety assessment requirements of the REACH legislation as it supports access to experimental data, (Quantitative) Structure-Activity Relationship models, and toxicological information through an integrating platform that adheres to regulatory requirements and OECD validation principles. Initial research defined the essential components of the Framework including the approach to data access, schema and management, use of controlled vocabularies and ontologies, architecture, web service and communications protocols, and selection and integration of algorithms for predictive modelling. OpenTox provides end-user oriented tools to non-computational specialists, risk assessors, and toxicological experts in addition to Application Programming Interfaces (APIs) for developers of new applications. OpenTox actively supports public standards for data representation, interfaces, vocabularies and ontologies, Open Source approaches to core platform components, and community-based collaboration approaches, so as to progress system interoperability goals.The OpenTox Framework includes APIs and services for compounds, datasets, features, algorithms, models, ontologies, tasks, validation, and reporting which may be combined into multiple applications satisfying a variety of different user needs. OpenTox applications are based on a set of distributed, interoperable OpenTox API-compliant REST web services. The OpenTox approach to ontology allows for efficient mapping of complementary data coming from different datasets into a unifying structure having a shared terminology and representation.Two initial OpenTox applications are presented as an illustration of the potential impact of OpenTox for high-quality and consistent structure-activity relationship modelling of REACH

  5. Collaborative development of predictive toxicology applications

    Directory of Open Access Journals (Sweden)

    Hardy Barry

    2010-08-01

    Full Text Available Abstract OpenTox provides an interoperable, standards-based Framework for the support of predictive toxicology data management, algorithms, modelling, validation and reporting. It is relevant to satisfying the chemical safety assessment requirements of the REACH legislation as it supports access to experimental data, (Quantitative Structure-Activity Relationship models, and toxicological information through an integrating platform that adheres to regulatory requirements and OECD validation principles. Initial research defined the essential components of the Framework including the approach to data access, schema and management, use of controlled vocabularies and ontologies, architecture, web service and communications protocols, and selection and integration of algorithms for predictive modelling. OpenTox provides end-user oriented tools to non-computational specialists, risk assessors, and toxicological experts in addition to Application Programming Interfaces (APIs for developers of new applications. OpenTox actively supports public standards for data representation, interfaces, vocabularies and ontologies, Open Source approaches to core platform components, and community-based collaboration approaches, so as to progress system interoperability goals. The OpenTox Framework includes APIs and services for compounds, datasets, features, algorithms, models, ontologies, tasks, validation, and reporting which may be combined into multiple applications satisfying a variety of different user needs. OpenTox applications are based on a set of distributed, interoperable OpenTox API-compliant REST web services. The OpenTox approach to ontology allows for efficient mapping of complementary data coming from different datasets into a unifying structure having a shared terminology and representation. Two initial OpenTox applications are presented as an illustration of the potential impact of OpenTox for high-quality and consistent structure

  6. Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Azimi, S.A.; Conrad, J.L.; Reed, J.E.

    1985-03-01

    Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

  7. Development and trial application of risk information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    JNES has been doing various activities to stimulate the introduction of Risk Informed Regulation (RIR) to the safety regulation of nuclear power plants (NPPs) in Japan. Some applications are already incorporated, such as the regulatory review of Maintenance Programs and Safety Significance Evaluation for Inspection Findings. In consideration with the experience of the accident in Fukushima Daiichi Nuclear Power Station, JNES addressed development of regulatory guidelines, evaluation of the current condition of Fukushima Daiichi Nuclear Power Station, evaluation of effectiveness of severe accident management measures with the backgrounds of insights and experiences on probabilistic risk assessment (PRA) and RIR. Especially, the experiences were applied to the development of the methodologies for evaluation of effectiveness of severe accident managements. As for inspection and operation of NPPs, JNES enhanced the PRA scope applied to the importance analysis for Maintenance Program, SDP and RI-ISI in consideration with the insights of RIR in Japan and other countries. (author)

  8. Developments in niobium steels for linepipe applications

    International Nuclear Information System (INIS)

    Heisterkamp, F.; Bergmann, B.; Chaussy, L.

    1982-11-01

    Current niobium containing steels being produced for line pipe applications, developed over the last ten years, demonstrate an excellent respoNse to heavy deformation at low temperatures, which results in an optimum balance of yield strength and toughness. However, it has long been recognized that excessive use of controlled rolling involves production penalties and contributes to the characteristic anisotropy present in rolled products. Thus, changes in rolling procedures would be desirable if they minimized delays or reduced directionality thereby resulting in further improvement of secondary properties, such as through thickness ductility and hydrogen induced cracking (HIC) tendency in sour gas environments. Present steel development is focused on transformation strengthening or increased precipitation hardening. Coupled with the trend to even lower carbon ( [pt

  9. Using Doctoral Experience Survey Data to Support Developments in Postgraduate Supervision and Support

    Directory of Open Access Journals (Sweden)

    Lucy Johnston

    2016-06-01

    Full Text Available Provision of both high standards of thesis supervision and high quality research environments are required for doctoral candidates to flourish. An important component of ensuring quality provision of research resources is the soliciting of feedback from research students and the provision from research supervisors and institutions of timely and constructive responses to such feedback. In this manuscript we describe the use of locally developed survey instruments to elicit student feedback. We then demonstrate how actions taken in response to this student feedback can help establish a virtuous circle that enhances doctoral students’ research experiences. We provide examples of changes to supervisory practice and resource allocation based on feedback and show the positive impact on subsequent student evaluations. While the examples included here are local, the issues considered and the methods and interventions developed are applicable to all institutions offering research degrees.

  10. Development of a Client-Server Chat Application

    OpenAIRE

    Malmberg, Lasse

    2017-01-01

    The goal of the Bachelor’s thesis was to develop a simple client-server chat application. The focus was on the development process and the underlying technologies that were utilized in the development of the chat application. The chat application was developed with the C++ programming language and the SDL software development library. The development environment consisted primarily of command-line operated tools. The thesis resulted in a functional chat application. The program is a d...

  11. Investment casting: parameters, application and recent development

    International Nuclear Information System (INIS)

    Zaid, A.I.O.

    2007-01-01

    Investment casting process, also referred to as the lost wax method and as precision casting, has been known for more than 6000 years. However, industry paid little attention to the process until the urgent military demands of World War 1 overtaxed the machine tool industry and short cuts were then needed to provide finished tools and precision parts, avoiding time-consuming in machining and assembly. The use of the process for the production of commercial casting has grown in the second half of the 20th century. The process is highly flexible and can handle great variety of parts which are difficult or even not possible to be produced by forging or other casting methods. In this paper, the investment casting process, its applications, advantages and limitations together with the parameters affecting it as related to pattern material, cluster, slurry and molten metal are given and discussed. Furthermore, the recent developments in the process particularly in manufacturing parts made of superalloys e.g nickel-base alloys are given and discussed. The striking fact that the process has advanced further in the last 60 years than it has in the previous 6000 years ensures that in the coming years of this century development in the process and its application will continue to advance in the interest of achieving higher quality and precision which can meet the critical performance standards being imposed. (author)

  12. Nanomedicine: Application Areas and Development Prospects

    Directory of Open Access Journals (Sweden)

    Consolación Melguizo

    2011-05-01

    Full Text Available Nanotechnology, along with related concepts such as nanomaterials, nanostructures and nanoparticles, has become a priority area for scientific research and technological development. Nanotechnology, i.e., the creation and utilization of materials and devices at nanometer scale, already has multiple applications in electronics and other fields. However, the greatest expectations are for its application in biotechnology and health, with the direct impact these could have on the quality of health in future societies. The emerging discipline of nanomedicine brings nanotechnology and medicine together in order to develop novel therapies and improve existing treatments. In nanomedicine, atoms and molecules are manipulated to produce nanostructures of the same size as biomolecules for interaction with human cells. This procedure offers a range of new solutions for diagnoses and “smart” treatments by stimulating the body’s own repair mechanisms. It will enhance the early diagnosis and treatment of diseases such as cancer, diabetes, Alzheimer’s, Parkinson’s and cardiovascular diseases. Preventive medicine may then become a reality.

  13. Survey of computer codes applicable to waste facility performance evaluations

    International Nuclear Information System (INIS)

    Alsharif, M.; Pung, D.L.; Rivera, A.L.; Dole, L.R.

    1988-01-01

    This study is an effort to review existing information that is useful to develop an integrated model for predicting the performance of a radioactive waste facility. A summary description of 162 computer codes is given. The identified computer programs address the performance of waste packages, waste transport and equilibrium geochemistry, hydrological processes in unsaturated and saturated zones, and general waste facility performance assessment. Some programs also deal with thermal analysis, structural analysis, and special purposes. A number of these computer programs are being used by the US Department of Energy, the US Nuclear Regulatory Commission, and their contractors to analyze various aspects of waste package performance. Fifty-five of these codes were identified as being potentially useful on the analysis of low-level radioactive waste facilities located above the water table. The code summaries include authors, identification data, model types, and pertinent references. 14 refs., 5 tabs

  14. Analysis about the development of mobile electronic commerce: An application of production possibility frontier model

    OpenAIRE

    Uesugi, Shiro; Okada, Hitoshi

    2012-01-01

    This study aims to further develop our previous research on production possibility frontier model (PPFM). An application of model to provide analysis on the mobile commerce survey for which data was collected in Japan und Thailand is presented. PPFM looks into the consumer behaviors as the results form the perception on the relationship between Convenience and Privacy Concerns of certain electronic commerce services. From the data of consumer surveys, PPFM is expected to provide practical sol...

  15. Integrated application of the database for airborne geophysical survey achievement information

    International Nuclear Information System (INIS)

    Ji Zengxian; Zhang Junwei

    2006-01-01

    The paper briefly introduces the database of information for airborne geophysical survey achievements. This database was developed on the platform of Microsoft Windows System with the technical methods of Visual C++ 6.0 and MapGIS. It is an information management system concerning airborne geophysical surveying achievements with perfect functions in graphic display, graphic cutting and output, query of data, printing of documents and reports, maintenance of database, etc. All information of airborne geophysical survey achievements in nuclear industry from 1972 to 2003 was embedded in. Based on regional geological map and Meso-Cenozoic basin map, the detailed statistical information of each airborne survey area, each airborne radioactive anomalous point and high field point can be presented visually by combining geological or basin research result. The successful development of this system will provide a fairly good base and platform for management of archives and data of airborne geophysical survey achievements in nuclear industry. (authors)

  16. The development of the Patient Expectations of Shoulder Surgery survey

    NARCIS (Netherlands)

    Koorevaar, Rinco C T; Haanstra, Tsjitske; Van't Riet, Esther; Lambers Heerspink, Okke F O; Bulstra, Sjoerd K

    2017-01-01

    BACKGROUND: Patient satisfaction after a surgical procedure is dependent on meeting preoperative expectations. There is currently no patient expectations survey available for patients undergoing shoulder surgery that is validated, reliable, and easy to use in daily practice. The aim of this study

  17. Recent Developments in Astrophysical and Cosmological Exploitation of Microwave Surveys

    DEFF Research Database (Denmark)

    Burigana, Carlo; Davies, Rodney D.; De Bernardis, Paolo

    2013-01-01

    In this paper, we focus on the astrophysical results and the related cosmological implications derived from recent microwave surveys, with emphasis to those coming from the Planck mission. We critically discuss the impact of systematic effects and the role of methods to separate the cosmic...

  18. Survey of wireless sensor network applications from a power utility’s distribution perspective

    CSIR Research Space (South Africa)

    Isaac, SJ

    2011-09-01

    Full Text Available provides an overview of the highlights from a comprehensive survey commissioned by Eskom regarding the feasibility of WSNs on the transmission and distribution network; the aim is to direct power utility investment and research and development effort...

  19. Femtosecond infrared spectroscopy: study, development and applications

    International Nuclear Information System (INIS)

    Bonvalet, Adeline

    1997-01-01

    This work has been devoted to the development and the applications of a new technique of infrared (5-20 μm) spectroscopy allowing a temporal resolution of 100 fs. This technique relies on a source of ultrashort infrared pulses obtained by frequency mixing in a nonlinear material. In particular, the optical rectification of 12-fs visible pulses in gallium arsenide has allowed us to obtain 40-fs infrared pulses with a spectrum extending from 5 pm up to 15 μm. Spectral resolution has been achieved by Fourier transform spectroscopy, using a novel device we have called Diffracting FTIR. These developments allow to study inter-subband transitions in quantum-well structures. The inter-subband relaxation time has been measured by a pump-probe experiment, in which the sample was excited with a visible pulse, and the variations of inter-subband absorption probed with an infrared pulse. Besides, we have developed a method of coherent emission spectroscopy allowing to monitor the electric field emitted by coherent charge oscillations in quantum wells. The decay of the oscillations due to the loss of coherence between excited levels yields a direct measurement of the dephasing time between these levels. Other applications include biological macromolecules like reaction centers of photosynthetic bacteria. We have shown that we were able to monitor variations of infrared absorption of about 10 -4 optical densities with a temporal resolution of 100 fs. This would constitute a relevant tool to study the role of molecular vibrations during the primary steps of biological processes. (author) [fr

  20. DISTANCE LEARNING: POTENTIAL APPLICATION AND DEVELOPMENT OUTLOOK

    Directory of Open Access Journals (Sweden)

    Yulija Mihajlovna Tsarapkina

    2017-11-01

    Full Text Available The article is devoted to the actual problem of distance education potential and prospects research in the Russian education system. According to the UNESCO estimates, if the current trend continues, then the number of people with a firm desire to receive an education would increase from 165 millions to 263 millions [7, 12]. Thus 98 million qualified students worldwide will be excluded from higher education due to a shortage of university seats. The purpose of the study is to analyze the historical and present state of the problem, to identify the potential and prospects of the development in distance learning within higher education. The methodological base of the research has become common methods of pedagogical sciences: pedagogical observation, survey, questionnaire, testing, comparative analysis, pedagogical experiment. The analytical review has shown several problem areas within distance learning, such as student’s motivation while distance course learning and training efficiency as compared to full-time university training. Combination of full-time training and distance learning leads to 31% enhancement of training efficiency and shows a sustainable increase of student’s motivation.

  1. Technology survey of computer software as applicable to the MIUS project

    Science.gov (United States)

    Fulbright, B. E.

    1975-01-01

    Existing computer software, available from either governmental or private sources, applicable to modular integrated utility system program simulation is surveyed. Several programs and subprograms are described to provide a consolidated reference, and a bibliography is included. The report covers the two broad areas of design simulation and system simulation.

  2. Activity Recognition Using Inertial Sensing for Healthcare, Wellbeing and Sports Applications: A Survey

    NARCIS (Netherlands)

    Avci, A.; Bosch, S.; Marin Perianu, Mihai; Marin Perianu, Raluca; Havinga, Paul J.M.

    This paper surveys the current research directions of activity recognition using inertial sensors, with potential application in healthcare, wellbeing and sports. The analysis of related work is organized according to the five main steps involved in the activity recognition process: preprocessing,

  3. Seismic applications in CBM exploration and development

    Energy Technology Data Exchange (ETDEWEB)

    Richardson, S.E.; Lawton, D.C. [Calgary Univ., AB (Canada)

    2002-07-01

    This Power Point presentation reviewed seismic methods, coal seam seismology, seismology and coalbed methane (CBM) development, and time-lapse seismic imaging with reference to numerical modelling and physical testing. The issue of resolution versus detection in various seismic methods was discussed. The thinnest resolvable beds are usually about 1.0 m thick. Coal zones with thin seams can be mapped using seismic reflection, but individual seams are difficult to resolve in field data. In terms of coal seismology, it was noted that seismic surveys make it possible to identify seam thickness, field geometry, subsurface structuring and facies changes. Facies model make it possible to determine the depositional environment, coal type, coal quality and lateral continuity. Some successes in coal seismology include the Cedar Hill and Ferron fields in the San Juan Basin. Numerical modelling methods include digital dipole compressional sonic and density well logs through Ardley Coal Zone, P-wave synthetic seismograms generated in SYNTH (MATLAB), and the alteration of density/velocity values to create new seismograms. Another numerical method is to take the difference between original and altered seismograms. It was shown that dewatering causes a decrease in velocity of about 20 per cent, and a 15 per cent decrease in density. Changes as small as 5 per cent in reservoir properties can be successfully imaged. It was concluded that the identification of dewatered zones allow for optimal positioning of development wells. Further physical testing will involve wet and dry p-wave velocities, s-wave velocities will be tested, and velocities will be measured under pressure. 2 tabs., 10 figs.

  4. Development of beam utilization/application technology

    Energy Technology Data Exchange (ETDEWEB)

    Choi, B H; Kim, Y K; Song, T Y [and others

    1999-05-01

    High power proton accelerator is considered as one of national fundamental research facilities and a key to advanced nuclear technology development, having been widely used in an un detachable relationship with nuclear research in advanced countries. The high power proton accelerator will be installed in several phases as an up front facility of the nuclear waste transmutation system. It is expected that a common understanding and a general agreement over proper utilization of the accelerator should be deduced and that a user program for beam utilization and application should be firmly established in time for the completion of each phase of the accelerator. This high power proton accelerator will consist of several component accelerators and, from up front, accelerators such as injector, RFQ, CCDTL, etc. will be installed in sequence and deliver respectively at each stage beams of 3MeV, 20MeV, 100Mev, etc. to be variously utilized forindustries, defence industry, medical treatment, environmental protection and basic science research. In order for the accelerator to be fully utilized as a national fundamental research facility beyond nuclear field, it is necessary to formulate a proceeding plan of the user program for the accelerator and to cultivate industrial utilization/application studies of proton beams accelerated by injector or RFQ of the accelerator. (author). 38 refs., 84 tabs., 39 figs.

  5. Development of beam utilization/application technology

    International Nuclear Information System (INIS)

    Choi, B. H.; Kim, Y.K.; Song, T.Y.

    1999-05-01

    High power proton accelerator is considered as one of national fundamental research facilities and a key to advanced nuclear technology development, having been widely used in an un detachable relationship with nuclear research in advanced countries. The high power proton accelerator will be installed in several phases as an up front facility of the nuclear waste transmutation system. It is expected that a common understanding and a general agreement over proper utilization of the accelerator should be deduced and that a user program for beam utilization and application should be firmly established in time for the completion of each phase of the accelerator. This high power proton accelerator will consist of several component accelerators and, from up front, accelerators such as injector, RFQ, CCDTL, etc. will be installed in sequence and deliver respectively at each stage beams of 3MeV, 20MeV, 100Mev, etc. to be variously utilized for industries, defence industry, medical treatment, environmental protection and basic science research. In order for the accelerator to be fully utilized as a national fundamental research facility beyond nuclear field, it is necessary to formulate a proceeding plan of the user program for the accelerator and to cultivate industrial utilization/application studies of proton beams accelerated by injector or RFQ of the accelerator. (author). 38 refs., 84 tabs., 39 figs

  6. Alloy development for cladding and duct applications

    International Nuclear Information System (INIS)

    Straalsund, J.L.; Johnson, G.D.

    1981-01-01

    Three general classes of materials under development for cladding and ducts are listed. Solid solution strengthened, or austenitic, alloys are Type 316 stainless steel and D9. Precipitation hardened (also austenitic) alloys consist of D21, D66 and D68. These alloys are similar to such commercial alloys as M-813, Inconel 706, Inconel 718 and Nimonic PE-16. The third general class of alloys is composed of ferritic alloys, with current emphasis being placed on HT-9, a tempered martensitic alloy, and D67, a delta-ferritic steel. The program is comprised of three parallel paths. The current reference, or first generation alloy, is 20% cold worked Type 316 stainless steel. Second generation alloys for near-term applications include D9 and HT-9. Third generation materials consist of the precipitation strengthened steels and ferritic alloys, and are being considered for implementation at a later time than the first and second generation alloys. The development of second and third generation materials was initiated in 1974 with the selection of 35 alloys. This program has proceeded to today where there are six advanced alloys being evaluated. These alloys are the developmental alloys D9, D21, D57, D66 and D68, together with the commerical alloy, HT-9. The status of development of these alloys is summarized

  7. European structural materials development for fusion applications

    Energy Technology Data Exchange (ETDEWEB)

    Schaaf, B. van der E-mail: vanderschaaf@nrg-nl.com; Ehrlich, K.; Fenici, P.; Tavassoli, A.A.; Victoria, M

    2000-09-01

    Leading long term considerations for choices in the European Long Term Technology programme are the high temperature mechanical- and compatibility properties of structural materials under neutron irradiation. The degrees of fabrication process freedom are closely investigated to allow the construction of complex shapes. Another important consideration is the activation behaviour of the structural material. The ideal solution is the recycling of the structural materials after a relatively short 'cooling' period. The structural materials development in Europe has three streams. The first serves the design and construction of ITER and is closely connected to the choice made: water cooled austenitic stainless steel. The second development stream is to support the design and construction of DEMO relevant blanket modules to be tested in ITER. The helium cooled pebble bed and the water cooled liquid lithium concept rely both on RAFM steel. The goal of the third stream is to investigate the potential of advanced materials for fusion power reactors beyond DEMO. The major contending materials: SiCSiC composites, vanadium, titanium and chromium alloys hold the promise of high operating temperatures, but RAFM has also a high temperature potential applying oxide dispersion strengthening. The development of materials for fusion power application requires a high flux 14 MeV neutron source to simulate the fusion power environment.

  8. Application of food irradiation in developing countries

    International Nuclear Information System (INIS)

    1966-01-01

    The panel on the Application of Food Irradiation in Developing Countries was convened in Vienna by the International Atomic Energy Agency (IAEA) in August 1964. The members of this panel examined the problem of food preservation in geographical areas where much food was lost through spoilage, deterioration and insect infestation. It was thought, that radiation treatment should be used to solve these preservation problems. The attendees included 13 experts, four observers from research organizations, and 2 representatives from the Food and Agriculture Organization (FAO) in Rome. The members of the panel examined the use of ionizing radiation to preserve fish, fruits, and vegetables and to inactivate disease producing viruses which are closely associated with animal products. Refs, figs and tabs

  9. Application of food irradiation in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    1966-05-01

    The panel on the Application of Food Irradiation in Developing Countries was convened in Vienna by the International Atomic Energy Agency (IAEA) in August 1964. The members of this panel examined the problem of food preservation in geographical areas where much food was lost through spoilage, deterioration and insect infestation. It was thought, that radiation treatment should be used to solve these preservation problems. The attendees included 13 experts, four observers from research organizations, and 2 representatives from the Food and Agriculture Organization (FAO) in Rome. The members of the panel examined the use of ionizing radiation to preserve fish, fruits, and vegetables and to inactivate disease producing viruses which are closely associated with animal products. Refs, figs and tabs.

  10. Survey of Noncommissioned Officer Academies for Criterion Development Purposes,

    Science.gov (United States)

    1961-12-01

    Inspection, Fitting and Wearing of the Uniform, Ceremonies, Customs and Courtesies, Conduct of Physical Training Program, etc. )--minimum of 15 hours. 3...in a course and covers the general responsibilities of leadership, problems of leader- subordinate relationships , and some of the leader’s specific...OPERATION AT INSTALLATIONS SURVEYED 3Y DA MILITARY PERSONNEL MANAGMNT TEAMS Type of Training Program Installation Refresher Leadership Instructor

  11. Developing an International Survey of Teachers' Assessment Capabilities

    DEFF Research Database (Denmark)

    Renken, Maggie; Otrel-Cass, Kathrin; Cowie, Bronwen

    teacher education into the first years as teachers across six countries. We target the nature of programmes and changes in understanding assessment purposes, practices, principles and policy. This project builds on the ACT survey of student-teacher understandings of assessment conducted over three years......Professional standards require teachers to be assessment literate - to construct, administer, and score reliable, valid assessments, communicate interpretations and use evidence to adjust teaching to support students. This project investigates student-teachers’ assessment literacy throughout...

  12. State of the art survey of network operating systems development

    Science.gov (United States)

    1985-01-01

    The results of the State-of-the-Art Survey of Network Operating Systems (NOS) performed for Goddard Space Flight Center are presented. NOS functional characteristics are presented in terms of user communication data migration, job migration, network control, and common functional categories. Products (current or future) as well as research and prototyping efforts are summarized. The NOS products which are revelant to the space station and its activities are evaluated.

  13. Proteomics Development and Application for Bioforensics

    Energy Technology Data Exchange (ETDEWEB)

    Wahl, Karen L.; Wunschel, David S.; Clowers, Brian H.

    2010-09-15

    Proteomics is a relatively new scientific discipline dedicated to the comprehensive study of the protein composition of biological systems. While genomic sequencing is an invaluable tool for bioforensic sample identification, proteomics complements genomics in that the genes present in an organism code for the proteins that can be present in a microorganism. Many proteins are conserved for general identification while other protein expression varies with environment/growth state/growth conditions (i.e. not all proteins are expressed at any given time or condition) providing additional information beyond genomic analysis. This expression specificity and the relative stability of proteins with respect to genetic material make them attractive targets for microorganism identification and forensic applications to complement genomic approaches. Proteomic analysis depends upon the availability of genome sequences of the relevant organisms or their near relatives. The known amino acid sequences for potential proteins within the database can be compared to amino acid sequences of actual proteins present in a sample as determined with high mass accuracy by mass spectrometry for identification of the proteins in the sample. With the development of technology for rapid genome sequencing of organisms, the known protein database is growing, supporting improved identification of the proteins present in a sample. Recent developments in mass spectrometry instrumentation and microbial sequencing are leading to an increased growth in application of proteomics to microbiology, pathogen detection, disease diagnosis and microbial forensics as well as other biological disciplines. Mass spectrometry analysis does not require a priori knowledge of the sample or expected targets to gain meaningful.

  14. Market survey for nuclear power in developing countries. Jamaica

    International Nuclear Information System (INIS)

    1973-09-01

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  15. Market survey for nuclear power in developing countries. Bangladesh

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1973-09-15

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  16. Market survey for nuclear power in developing countries. Pakistan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1973-09-15

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  17. Market survey for nuclear power in developing countries. Jamaica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1973-09-15

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  18. Market survey for nuclear power in developing countries. Singapore

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1973-09-15

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  19. Market survey for nuclear power in developing countries. Thailand

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1973-09-15

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  20. Market survey for nuclear power in developing countries. Thailand

    International Nuclear Information System (INIS)

    1973-09-01

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  1. Market survey for nuclear power in developing countries. Bangladesh

    International Nuclear Information System (INIS)

    1973-09-01

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  2. Market survey for nuclear power in developing countries. Pakistan

    International Nuclear Information System (INIS)

    1973-09-01

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  3. Market survey for nuclear power in developing countries. Singapore

    International Nuclear Information System (INIS)

    1973-09-01

    Fourteen Country Reports, one for each of the developing countries that took part in the Survey, have been prepared. These fourteen Country Reports are summarized in the General Report. Sections 1-8 of each Report contain data gathered during the visit of the team of experts and other data gathered for general accuracy. Sections 9-17 present the method of approach, the data used in the analyses, the analyses made and the results of the studies. General data and methodology common to the studies for all countries are given in the Appendixes. Section 1 concerns general economics and contains data on population, gross national product, mineral resources and energy consumption. Data on the national energy resources such as hydro potential, fossil fuel reserves, refinery capacity and production, and nuclear materials resources are given in Section 2. The electricity supply system, its development, generating and transmission facilities, costs of existing plants and plants under construction, various system operating and economic criteria, and technical data on existing generating units are given in Section 3. The historical growth of the electrical demand is described in Section 4, together with historical data on per-capita consumption, installed capacity, energy generated, load factor, and system load characteristics. Data are also given on system reliability, reliability criteria, and outage experience. The future system requirements are described in Section 5 including projections of maximum demand, generated energy, load factor and future reserve capacity. Also included are data on generating units and transmission facilities planned, under construction or projected, and on future sites. Section 6 contains data on local material and labour costs, labour practices, and the participation of local industry in the manufacture of power system components. Economic and financial aspects such as the method of evaluating the economic merit of projects, sources of funds

  4. Fiscal 1998 New Sunshine Program achievement report. Development for practical application of photovoltaic system - Development of ultrahigh-efficiency crystalline compound solar cell manufacturing technology - Research and survey of peripheral element technologies (Research and survey for development of solar cell of new power generation device structure); 1998 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Chokokoritsu kessho kagobutsu taiyo denchi no seizo gijutsu kaihatsu / shuhen yoso gijutsu ni kansuru chosa kenkyu (shinhatsuden soshi kozo taiyo denchi kaitaku no chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Attention is paid to behavior at the molecular level with reference taken to the photosynthetic mechanism, and a behavioral mechanism is proposed, which incorporates, in place of the conventional band model, a concept of a molecular structure based on electron transfer, excitation energy transfer, and reactions of oxidation and reduction. Discussion is then made on elements of technology development for the embodiment of high-efficiency organic ferroelectric thin-film solar cells. The elements taken up include the feasibility of organic ferroelectric thin-film cells, photoelctric conversion systems of plants and photosynthetic bacteria, solar cells using donor-acceptor type dyes, organic thin-film solar cells using conductive polymers, and efficient photoexcitation of organic dyes. Fullerene compounds are semiconductive and their band gaps may be controlled to stay within the range of 0.75-1.9eV, and this justifies a hope that they will serve as solar cells. As for TPV (thermophotovoltaic) conversion, it is under development mainly at NASA (National Aeronautics and Space Administration) as a transportable power source based on heat of combustion. Efforts are also being exerted since 1990 in five European countries to develop TPV systems for small-scale cogeneration. (NEDO)

  5. Fiscal 1999 geothermal development promotion survey. Development potentiality survey - Strategic survey/nation-wide survey (Report on districts in Fukushima Prefecture); 1999 nendo chinetsu kaihatsu sokushin chosa. Kaihatsu kanosei chosa - senryakuteki chosa zenkoku chosa (Fukushimaken chiiki hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-08-01

    For the effective implementation of the survey, data in existence were reanalyzed for the Bandai-Azuma district and Minami-Aizu/Nasu district, and a wide area geothermal model was built. Using the model, exploitable resources were assessed and a prioritized survey introduction program was worked out for the promotion of geothermal development. In compliance with the strategic survey implementation manual, the Bandai-Azuma district was assessed, and the northeastern-eastern foot area of Azuma Volcano and the northern foot area of Adatara Volcano were extracted as areas promising geothermal energy development. The Monte Carlo method was applied to the prioritized survey area at the northeastern foot of Azuma Volcano, and then it was estimated that, with a probability of not less than 90%, the exploitable resources would be 6.4MWe in the case of data accuracy of 0.5 or more and 12.0MWe in the case of data accuracy of 0.4 or more. Selected as promising areas in the Minami-Aizu/Nasu district were the Yanaizu-Nishiyama area, the neighborhood of Nasudake-Chausudake, and the neighborhood of Shiobara-Fuji. (NEDO)

  6. Fiscal 1999 geothermal development promotion survey. Development potentiality survey - Strategic survey/nation-wide survey (Report on Hokkaido region); 1999 nendo chinetsu kaihatsu sokushin chosa. Kaihatsu kanosei chosa - senryakuteki chosa zenkoku chosa (Hokkaido chiiki hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-08-01

    For the effective implementation of the survey, an analysis was conducted into areas expected to be successfully developed for geothermal energy, and promising areas and prioritized survey areas were selected. Data then in existence were collected at the Doto district 1, Doto district 2, Toyoha-Niseko district, and the Iburi district and subjected to reanalysis, and a wide area geothermal system conceptual model was built. Using the model, development-promising areas were extracted, the amount of resources was assessed, and an optimum survey program was prepared. One promising area was selected in the Doto district 1, four in the Doto district 2, two in the Toyoha-Niseko district, and one in the Iburi district. As prioritized survey areas, Musadake was selected in the Doto district 1; Yoichidake, Yunosawa, and Takinosawa in the Toyoha-Niseko district; and Raibadake in the Iburi district. A Monte Carlo analysis was conducted, and the result indicated that Musakake had 93-121MWe in resources of which 55MWe would be exploitable with a probability of not less than 90%. (NEDO)

  7. Advanced nuclear materials development -Development of superconductor application technology-

    International Nuclear Information System (INIS)

    Hong, Kye Won; Lee, Heui Kyoon; Lee, Hoh Jin; Kim, Chan Joong; Jang, Kun Ik; Kim, Kee Baek; Kwon, Sun Chil; Park, Hae Woong; Yoo, Jae Keun; Kim, Jong Jin; Jang, Joong Chul; Yang, Suk Woo

    1995-07-01

    Fabrication of high Tc bulk superconductor and its application, fabrication of superconducting wire for electric power device and analysis for cryogenic system were carried out for developing superconductor application technologies for electric power system. High quality YBaCuO bulk superconductor was fabricated by controlling initial powder preparation process and prototype fly wheel energy storage device was designed basically. The superconducting levitation force measuring device was made to examine the property of prepared superconductor specimen. Systematic studies on the method of starting powder preparation, mechanical fabrication process, heat treatment condition and analysis of plastic deformation were carried out to increase the stability and reproducibility of superconducting wire. A starting powder with good reactivity and fine particle size was obtained by emulsion drying method. Ag/BSCCO tape with good cross sectional shape and Tc of 16,000 A/cm 2 was fabricated by applying CIP packing procedure. Multifilamentary wire with the Jc of approx. 10000 A/cm 2 was fabricated by rolling method using square billet as starting shape. The joining of the multifilament wire was done by etching and pressing process and showed 50% of joining efficiency. Analysis on the heat loss in cryostat for high Tc superconducting device was carried out for optimum design of the future cryogenic system. 126 figs, 14 tabs, 214 refs. (Author)

  8. Advanced nuclear materials development -Development of superconductor application technology-

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Kye Won; Lee, Heui Kyoon; Lee, Hoh Jin; Kim, Chan Joong; Jang, Kun Ik; Kim, Kee Baek; Kwon, Sun Chil; Park, Hae Woong; Yoo, Jae Keun; Kim, Jong Jin; Jang, Joong Chul; Yang, Suk Woo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-07-01

    Fabrication of high Tc bulk superconductor and its application, fabrication of superconducting wire for electric power device and analysis for cryogenic system were carried out for developing superconductor application technologies for electric power system. High quality YBaCuO bulk superconductor was fabricated by controlling initial powder preparation process and prototype fly wheel energy storage device was designed basically. The superconducting levitation force measuring device was made to examine the property of prepared superconductor specimen. Systematic studies on the method of starting powder preparation, mechanical fabrication process, heat treatment condition and analysis of plastic deformation were carried out to increase the stability and reproducibility of superconducting wire. A starting powder with good reactivity and fine particle size was obtained by emulsion drying method. Ag/BSCCO tape with good cross sectional shape and Tc of 16,000 A/cm{sup 2} was fabricated by applying CIP packing procedure. Multifilamentary wire with the Jc of approx. 10000 A/cm{sup 2} was fabricated by rolling method using square billet as starting shape. The joining of the multifilament wire was done by etching and pressing process and showed 50% of joining efficiency. Analysis on the heat loss in cryostat for high Tc superconducting device was carried out for optimum design of the future cryogenic system. 126 figs, 14 tabs, 214 refs. (Author).

  9. Rising to the Challenge: Developing a Survey of Workplace Skills, Civic Engagement, and Global Awareness

    Science.gov (United States)

    Ouimet, Judith A.; Pike, Gary R.

    2008-01-01

    This chapter describes the ongoing development of a survey of students' workplace skills, civic engagement, and global awareness that colleges and universities can use to document their contributions to the public good. The student growth survey currently under development offers colleges and universities an opportunity to refocus the attention of…

  10. Disclosure of Temporary Exposures as Permanent Website Applications through the Patrimonial Survey

    Science.gov (United States)

    Corso, Juan; Garcia-Almirall, Pilar; López, Daniel; Casals, Jordi

    2017-10-01

    In a context of web application in the field of the dissemination of cultural heritage, this article advances in a methodology for the optimization of points clouds obtained through the technology of Laser Scanner (TLS). Identifying the potential of TLS surveys as interactive models that allow the cultural heritage to be perpetuated over time. This point cloud optimization is developed with free software, focusing its exploitation on an interactive web application, which has made it possible to convert two temporary museum exhibitions into permanent exhibitions in virtual format. Developed in conjunction with the Museu d’Història de la Ciutat de Barcelona. The case study focuses on the Palau Reial Major, Gothic style, formed by the chapel of Santa Àgata (built in 1302, on the Roman wall) and Saló del Tinell (built between 1359 and 1370, on the Roman remains). Located in the Plaça del Rei, in the old town of Barcelona. In this application is very important the visual impact, it requires to represent a faithful model of the interior of the building, from the point of view of color and lighting, avoiding the transparencies of the model through a dense cloud of dots, without occlusions, this requires a great quantity of positions. This implies a clear methodology, using different techniques such as photographic proyection, given the complexity of lighting of the building, as much for the artificial lighting as for the lighting of the stained glass. In this process, there were 84 positions that provide greater density of points, which are optimized with free programs. The temporary exhibitions of the case studies, elaborated by the MUHBA in the Saló del Tinell are: “Indianas, 1736-1847. The origins of industrial Barcelona” exposed from May 19, 2012 to March 3, 2013 and “El Món del 1714” exposed from December 20 to September 28, 2014. Both are based on a tour with showcases and exhibitors where different objects of a museum character are shown, such as

  11. Research and application of soil-mercury-surveys method for locating uranium

    International Nuclear Information System (INIS)

    You Yunfei; Lu Shili; Jiao Zongrun

    1995-06-01

    Soil-Hg-Surveys method for locating uranium ore was presented. Soil-sampler of drilling bottom, the ability of surveying the deep uranium orebodies was raised by using this method. Application of minicomputer technology to pyrolytic-Hg-analysis raises the degree of automation and precision of the analysis. Application condition of optimum is Hg content of orebodies >1 x 10 -6 . Locating deep is about 100 m. The forecast of uranium orebodies achieved success in two unknown section that are 534 and 510 mining area, therefore two little size deposits expanded into middle size deposits. This method is as well applicable to locating gold, silver, copper, lead zinc and oil-gas natural resource and so on. (8 figs., 3 tabs.)

  12. Visual servoing in medical robotics: a survey. Part II: tomographic imaging modalities--techniques and applications.

    Science.gov (United States)

    Azizian, Mahdi; Najmaei, Nima; Khoshnam, Mahta; Patel, Rajni

    2015-03-01

    Intraoperative application of tomographic imaging techniques provides a means of visual servoing for objects beneath the surface of organs. The focus of this survey is on therapeutic and diagnostic medical applications where tomographic imaging is used in visual servoing. To this end, a comprehensive search of the electronic databases was completed for the period 2000-2013. Existing techniques and products are categorized and studied, based on the imaging modality and their medical applications. This part complements Part I of the survey, which covers visual servoing techniques using endoscopic imaging and direct vision. The main challenges in using visual servoing based on tomographic images have been identified. 'Supervised automation of medical robotics' is found to be a major trend in this field and ultrasound is the most commonly used tomographic modality for visual servoing. Copyright © 2014 John Wiley & Sons, Ltd.

  13. National Survey Report of PV Power Applications in France 2012. Photovoltaic Power Applications in France - National Survey Report 2012

    International Nuclear Information System (INIS)

    Durand, Yvonnick

    2013-05-01

    the industrial project stage. Manufacturers are producing multi-crystalline silicon ingots (annual capacity: 130 MW equivalent), slicing these into thin wafers. Crystalline silicon cell manufacturers offer total annual production capacity of around 105 MW and 2012 production is estimated at 50 MW. There are around a dozen module manufacturers, serving a wide range of markets. Their annual production capacity stands at around 750 MW and annual 2012 production is estimated to be 300 MW. New initiatives have emerged in the concentrator photovoltaic (CPV) sector (cells and modules) and in the solar tracker sector for grid-connected centralised ground-mounted systems. The government has introduced two major support measures to encourage the development of the photovoltaic sector in France. These measures involve guaranteed feed-in tariffs and tender processes for the construction and operation of systems exceeding 100 kW. The feed-in tariffs favour building-integrated photovoltaic systems (IAB) or simplified building integrated photovoltaic systems (ISB). They are revised each quarter. For building-integrated IAB systems (≤ 9 kW), the tariff was set at 0,3415 EUR/kWh in Q4 2012. The tariff for ISB systems (36 kW - 100 kW) was set at 0,1837 EUR/kWh. For all other types of system up to 12 MW, the tariff was cut by 24 % over the year, ending at 0,0840 EUR/kWh. At the end of 2012 the government announced a new support measure namely a feed-in tariff rise of up to 10 % for systems using photovoltaic modules manufactured in the European Economic Area. At the same time the tariff schedule was simplified (three tariff categories instead of five). The 2012 tender process for systems between 100 kW and 250 kW led to the selection of a total of 115 MW of projects. The Commission de regulation de l'energie (CRE - French energy regulation commission), which is responsible for these matters, launched a new tender process in early 2013 with a target of 120 MW. The 2012 tender

  14. Reactor alarm system development and application issues

    Energy Technology Data Exchange (ETDEWEB)

    Drexler, J E; Oicese, G O [INVAP S.E. (Argentina)

    1997-09-01

    The new hardware and software technologies, and the need in research reactors for assistance systems in operation and maintenance, have given an appropriate background to develop a computer based system named ``Reactor Alarm System`` (RAS). RAS is a software package, user oriented, with emphasis on production, experiments and maintenance goals. It is designed to run on distributed systems conformed with microcomputers under QNX operating system. RAS main features are: (a) Alarm Panel Display; (b) Alarm Page; (c) Alarm Masking and Inhibition; (d) Alarms Color and Attributes; (e) Condition Classification; and (f) Arrangement Presentation. RAS design allows it to be installed as a part of a computer based Supervision and Control System in new installations or retrofit existing reactor instrumentation systems. The analysis of human factors during development stage and successive user feedback from different applications, brought out several RAS improvements: (a) Multiple-copy alarm summaries; (b) Improved alarm handling; (c) Extended dictionary; and (d) Enhanced hardware availability. It has proved successful in providing new capabilities for operators, and also has shown the continuous increase of user-demands, reflecting the expectations placed today on computer-based systems. (author). 6 figs, 1 tabs.

  15. Shot peening: theory applications and recent development

    International Nuclear Information System (INIS)

    Zaid, A.I.O.

    1999-01-01

    Shot peening is a surface treatment process by which the surface of an elastic-plastic target material is subjected to multiple impact by spherical shots made of glass or hard steel in a defined and controlled manner. The multiple impact produces a dynamic compressive stress at the surface of the target, thereby effectively improving its mechanical behavior and eliminates cracks and imperfections hence improving the fatigue life and strength. In this paper, the theory and practice of the shot peening process are reviewed. The main parameters involved in the process and their effects on shot peening are presented and discussed which include: shot material, size and geometry, shot pressure and shot velocity, projection angle, exposure time, table rotational speed, standoff distance coverage, saturation and peening intensity. Furthermore, the effect of shot peening on fatigue life and fatigue strength of ferrous and non-ferrous materials together with other different industrial applications of the process are given. Recent developments in utilizing the shot peening process with welded parts and hard chromium plating aiming at improvement of their fatigue strength and their resistance to stress corrosion cracking are also presented and discussed. Finally, future development of the process are outlined and discussed. (author)

  16. Reactor alarm system development and application issues

    International Nuclear Information System (INIS)

    Drexler, J.E.; Oicese, G.O.

    1997-01-01

    The new hardware and software technologies, and the need in research reactors for assistance systems in operation and maintenance, have given an appropriate background to develop a computer based system named ''Reactor Alarm System'' (RAS). RAS is a software package, user oriented, with emphasis on production, experiments and maintenance goals. It is designed to run on distributed systems conformed with microcomputers under QNX operating system. RAS main features are: a) Alarm Panel Display; b) Alarm Page; c) Alarm Masking and Inhibition; d) Alarms Color and Attributes; e) Condition Classification; and f) Arrangement Presentation. RAS design allows it to be installed as a part of a computer based Supervision and Control System in new installations or retrofit existing reactor instrumentation systems. The analysis of human factors during development stage and successive user feedback from different applications, brought out several RAS improvements: a) Multiple-copy alarm summaries; b) Improved alarm handling; c) Extended dictionary; and d) Enhanced hardware availability. It has proved successful in providing new capabilities for operators, and also has shown the continuous increase of user-demands, reflecting the expectations placed today on computer-based systems. (author). 6 figs, 1 tabs

  17. Materials development for fast reactor applications

    Energy Technology Data Exchange (ETDEWEB)

    Jayakumar, T.; Mathew, M.D.; Laha, K.; Sandhya, R., E-mail: san@igcar.gov.in

    2013-12-15

    application are other developments being perused towards improving the economic competitiveness of fast reactor technology.

  18. Analysis of the development of cross-platform mobile applications

    OpenAIRE

    Pinedo Escribano, Diego

    2012-01-01

    The development of mobile phone applications is a huge market nowadays. There are many companies investing lot of money to develop successful and profitable applications. The problem emerges when trying to develop an application to be used by every user independently of the platform they are using (Android, iOS, BlackBerry OS, Windows Phone, etc.). For this reason, on the last years many different technologies have appeared that making the development of cross-platform applications easier. In...

  19. Advanced atomic force microscopy: Development and application

    Science.gov (United States)

    Walters, Deron A.

    Over the decade since atomic force microscopy (AFM) was invented, development of new microscopes has been closely intertwined with application of AFM to problems of interest in physics, chemistry, biology, and engineering. New techniques such as tapping mode AFM move quickly in our lab from the designer's bench to the user's table-since this is often the same piece of furniture. In return, designers get ample feedback as to what problems are limiting current instruments, and thus need most urgent attention. Tip sharpness and characterization are such a problem. Chapter 1 describes an AFM designed to operate in a scanning electron microscope, whose electron beam is used to deposit sharp carbonaceous tips. These tips can be tested and used in situ. Another limitation is addressed in Chapter 2: the difficulty of extracting more than just topographic information from a sample. A combined AFM/confocal optical microscope was built to provide simultaneous, independent images of the topography and fluorescence of a sample. In combination with staining or antibody labelling, this could provide submicron information about the composition of a sample. Chapters 3 and 4 discuss two generations of small cantilevers developed for lower-noise, higher-speed AFM of biological samples. In Chapter 4, a 26 mum cantilever is used to image the process of calcite growth from solution at a rate of 1.6 sec/frame. Finally, Chapter 5 explores in detail a biophysics problem that motivates us to develop fast, quiet, and gentle microscopes; namely, the control of crystal growth in seashells by the action of soluble proteins on a growing calcite surface.

  20. An OOP Approach to Simplify MDI Application Development An OOP Approach to Simplify MDI Application Development

    Directory of Open Access Journals (Sweden)

    Donato Hernández Fusilier

    2012-02-01

    Full Text Available The Multiple Document Interface (MDI is a Microsoft Windows specification that allows managing multiple documents using a single graphic interface application. An MDI application allows opening several documents simultaneously. Only one document is active at a particular time. MDI applications can be deployed using Win32 or Microsoft Foundation Classes (MFC. Programs developed using Win32 are faster than those using MFC. However, Win32applications are difficult to implement and prone to errors. It should be mentioned that, learning how to properly use MFC to deploy MDI applications is not simple, and performance is typically worse than that of Win32 applications. A method to simplify the development of MDI applications using Object-Oriented Programming (OOP is proposed. Subsequently, it is shown that this method generates compact code that is easier to read and maintain than other methods (i.e., MFC. Finally, it is demonstrated that the proposed method allowsthe rapid development of MDI applications without sacrificing application performance.La Interfase para Múltiples Documentos (MDI es una especificación del sistema operativo Microsoft Windows que permite manipular varios documentos usando un sólo programa. Un programa del tipo MDI permite abrir varios documentos simultáneamente. En un instante dado, sólo un documento es activo. Los programas del tipo MDI pueden desarrollarseu sando Win32 o las clases fundamentales de Microsoft (MFC. Los programas desarrollados usando Win32 son más rápidos que los programas que usan MFC. Sin embargo, éstos son difíciles de implementar promoviendo la existencia de errores. Cabe mencionar que el desarrollo de programas del tipo MDI usando MFC no es sencillo, y que su desempeño estípicamente peor que el de un programa del tipo Win32. Se propone un método que drásticamente simplifica el desarrollo de programas del tipo MDI por medio de la Programación Orientada a Objetos (POO. Se demuestra que el m

  1. Lean applications: a survey of publications with respect to South African industry

    Directory of Open Access Journals (Sweden)

    Dondofema, R. A.

    2017-05-01

    Full Text Available South African industry faces immense global competition from developed countries such as Germany probably because of the adoption of lean manufacturing techniques by the latter. This study is a survey on publications concerning implementation and adoption of lean manufacturing in South Africa. To assess South Africa with regards to research publications on lean manufacturing, a benchmark exercise was conducted with Germany for the period 2014 to 2015. The study concludes by highlighting the gaps identified during this survey and recommendations.

  2. iPads, mobile technologies, and communication applications: a survey of family wants, needs, and preferences.

    Science.gov (United States)

    Meder, Allison M; Wegner, Jane R

    2015-03-01

    Families of children with communication disabilities were surveyed to explore wants and preferences relative to mobile media technology, including iPads, as a form of augmentative and alternative communication (AAC). The families surveyed reported wanting information and support from professionals, including speech language pathologists (SLPs), who are knowledgeable about AAC. These families wanted devices to meet their children's individual needs and reported that ease of use and affordability were the most influential characteristics in the purchase of mobile media devices and communication applications. SLPs who understand family decision making can utilize collaborative clinical decision making that respects families' wants and needs, while also focusing on device feature matching and family education.

  3. Photovoltaic battery & charge controller market & applications survey. An evaluation of the photovoltaic system market for 1995

    Energy Technology Data Exchange (ETDEWEB)

    Hammond, R.L.; Turpin, J.F.; Corey, G.P. [and others

    1996-12-01

    Under the sponsorship of the Department of Energy, Office of Utility Technologies, the Battery Analysis and Evaluation Department and the Photovoltaic System Assistance Center of Sandia National Laboratories (SNL) initiated a U.S. industry-wide PV Energy Storage System Survey. Arizona State University (ASU) was contracted by SNL in June 1995 to conduct the survey. The survey included three separate segments tailored to: (a) PV system integrators, (b) battery manufacturers, and (c) PV charge controller manufacturers. The overall purpose of the survey was to: (a) quantify the market for batteries shipped with (or for) PV systems in 1995, (b) quantify the PV market segments by battery type and application for PV batteries, (c) characterize and quantify the charge controllers used in PV systems, (d) characterize the operating environment for energy storage components in PV systems, and (e) estimate the PV battery market for the year 2000. All three segments of the survey were mailed in January 1996. This report discusses the purpose, methodology, results, and conclusions of the survey.

  4. The Trojan Lifetime Champions Health Survey: Development, Validity, and Reliability

    Science.gov (United States)

    Sorenson, Shawn C.; Romano, Russell; Scholefield, Robin M.; Schroeder, E. Todd; Azen, Stanley P.; Salem, George J.

    2015-01-01

    Context Self-report questionnaires are an important method of evaluating lifespan health, exercise, and health-related quality of life (HRQL) outcomes among elite, competitive athletes. Few instruments, however, have undergone formal characterization of their psychometric properties within this population. Objective To evaluate the validity and reliability of a novel health and exercise questionnaire, the Trojan Lifetime Champions (TLC) Health Survey. Design Descriptive laboratory study. Setting A large National Collegiate Athletic Association Division I university. Patients or Other Participants A total of 63 university alumni (age range, 24 to 84 years), including former varsity collegiate athletes and a control group of nonathletes. Intervention(s) Participants completed the TLC Health Survey twice at a mean interval of 23 days with randomization to the paper or electronic version of the instrument. Main Outcome Measure(s) Content validity, feasibility of administration, test-retest reliability, parallel-form reliability between paper and electronic forms, and estimates of systematic and typical error versus differences of clinical interest were assessed across a broad range of health, exercise, and HRQL measures. Results Correlation coefficients, including intraclass correlation coefficients (ICCs) for continuous variables and κ agreement statistics for ordinal variables, for test-retest reliability averaged 0.86, 0.90, 0.80, and 0.74 for HRQL, lifetime health, recent health, and exercise variables, respectively. Correlation coefficients, again ICCs and κ, for parallel-form reliability (ie, equivalence) between paper and electronic versions averaged 0.90, 0.85, 0.85, and 0.81 for HRQL, lifetime health, recent health, and exercise variables, respectively. Typical measurement error was less than the a priori thresholds of clinical interest, and we found minimal evidence of systematic test-retest error. We found strong evidence of content validity, convergent

  5. Development of an airborne gamma radiation system for snow surveys

    Energy Technology Data Exchange (ETDEWEB)

    Fritzsche, A E [EG and G, Inc., Las Vegas, NV (USA)

    1979-01-01

    An airborne gamma-snow survey system requires detailed design to obtain maximum precision and accuracy. The use of NaI(Te) gamma detectors with a full gamma energy spectrum pulse height analyzer together with a small computer provide a self-contained and flexible system. The dual detector method determines atmospheric radon perturbations in the detection system. Detailed calibration experiments must be performed to determine twenty parameters that describe the physical nature of the system. Multiple high altitude and lake flights are used to obtain background components. Simulation pads, loaded with varying concentrations of /sup 40/K, /sup 232/Th and /sup 23/..gamma..U yield photopeak stripping coefficients and basic system sensitivity. Multiple altitude flights over land lines provide air attenuation coefficients which may converted to water attenuation coefficients.

  6. Adolescent lifestyle and behaviour: a survey from a developing country.

    Directory of Open Access Journals (Sweden)

    Waris Qidwai

    2010-09-01

    Full Text Available Adolescents form two-thirds of our population. This is a unique group of people with special needs. Our survey aims to identify the lifestyle and behavioral patterns in this group of people and subsequently come up with issues that warrant special attention.A survey was performed in various schools of Karachi. Data collection was done via a face-to-face interview based on a structured, pre-tested questionnaire. Participants included all willing persons between 12-19 years of age.Most adolescents with lifestyle issues fell in the age group of 16-18 years. Females were more depressed than males and had more sleep problems. Substance abuse and other addictions were documented more in males. Watching television or listening to music was stated as the most common late night activity (61.8% and therefore was also referred to as the contributory factor for less than eight hours of sleep each day. (58.9% of the respondents are getting less than eight hours of sleep daily. (41.5% of the respondents who felt depressed sought treatment for it. Quite a few of them were also indulged in substance abuse and other addictions. Only (16.8% of the respondents opined that physical activity is essential for health. Thirty-five adolescents out of all the respondents were smoking cigarettes currently, whereas 7% of the respondents chewed paan (areca nut. Peer pressure was the most common reason (37.1% to start smoking.Adolescents need to be treated as a distinct segment of our population and it is important to realize and address their health and lifestyle problems. Inadequate sleep, depression and smoking were the leading unhealthy behaviours among the respondents. Families can play an important role to help these adolescents live a healthier life. Further research studies should be carried out to highlight issues of concern and their possible solutions in this population.

  7. Development and applications of ultrafine aluminium powders

    International Nuclear Information System (INIS)

    Kearns, Martin

    2004-01-01

    Over the last 20 years or so, a variety of new technologies has been developed to produce sub-micron powders. Among the products attracting interest is nanoaluminium which is being evaluated in specialist propulsion and exothermic end-uses. This paper examines the advances made in 'nanopowder' production in the context of the existing aluminium powder industry where finest commercial grades have a median size of ∼6 μm (one or two orders of magnitude coarser than nanopowders) and which today supplies the markets being targeted by nanopowders with coarser, but effective products. Are there genuine market opportunities for nanoaluminium and if so, how will they be produced? One the one hand there are the novel nanopowder production methods which are high yielding but generally slow and costly, while on the other, there is the very fine fraction from conventional atomising routes which generate a very low yield of sub-micron powder but which nevertheless can translate into a meaningful rate as part of the bulk production. Can conventional routes ever hope to make sufficient volumes of nanopowders cost effectively and which will be the favoured routes in future? Moreover, what of the 'ultrafine' size range (∼0.5-5 μm) which is of more immediate potential interest to today's powder users. This paper seeks to identify the near term opportunities for application of low volume/high value ultrafine and nano powders

  8. [Development and Application of Catalytic Tyrosine Modification].

    Science.gov (United States)

    Sato, Shinichi; Tsushima, Michihiko; Nakamura, Kosuke; Nakamura, Hiroyuki

    2018-01-01

     The chemical labeling of proteins with synthetic probes is a key technique used in chemical biology, protein-based therapy, and material science. Much of the chemical labeling of native proteins, however, depends on the labeling of lysine and cysteine residues. While those methods have significantly contributed to native protein labeling, alternative methods that can modify different amino acid residues are still required. Herein we report the development of a novel methodology of tyrosine labeling, inspired by the luminol chemiluminescence reaction. Tyrosine residues are often exposed on a protein's surface and are thus expected to be good targets for protein functionalization. In our studies so far, we have found that 1) hemin oxidatively activates luminol derivatives as a catalyst, 2) N-methyl luminol derivative specifically forms a covalent bond with a tyrosine residue among the 20 kinds of natural amino acid residues, and 3) the efficiency of tyrosine labeling with N-methyl luminol derivative is markedly improved by using horseradish peroxidase (HRP) as a catalyst. We were able to use molecular oxygen as an oxidant under HRP/NADH conditions. By using these methods, the functionalization of purified proteins was carried out. Because N-methyl luminol derivative is an excellent protein labeling reagent that responds to the activation of peroxidase, this new method is expected to open doors to such biological applications as the signal amplification of HRP-conjugated antibodies and the detection of protein association in combination with peroxidase-tag technology.

  9. Development of an EMCCD for LIDAR applications

    Science.gov (United States)

    De Monte, B.; Bell, R. T.

    2017-11-01

    A novel detector, incorporating e2v's EMCCD (L3VisionTM) [1] technology for use in LIDAR (Light Detection And Ranging) applications has been designed, manufactured and characterised. The most critical performance aspect was the requirement to collect charge from a 120μm square detection area for a 667ns temporal sampling window, with low crosstalk between successive samples, followed by signal readout with sub-electron effective noise. Additional requirements included low dark signal, high quantum efficiency at the 355nm laser wavelength and the ability to handle bright laser echoes, without corruption of the much fainter useful signals. The detector architecture used high speed charge binning to combine signal from each sampling window into a single charge packet. This was then passed through a multiplication register (EMCCD) operating with a typical gain of 100X to a conventional charge detection circuit. The detector achieved a typical quantum efficiency of 80% and a total noise in darkness of < 0.5 electrons rms. Development of the detector was supported by ESA.

  10. Developing and Testing Resiliency of Microservice Applications

    OpenAIRE

    Snellman, Mikael

    2018-01-01

    Today many of the most popular service provides such as Netflix, LinkedIn, Amazon and others compose their applications from a group of individual services. These providers need to deploy new changes and features continuously without any downtime in the application and scale individual parts of the system on demand. To address these needs the usage of microservice architecture has grown in popularity in recent years. In microservice architecture, the application is a collectio...

  11. Novel Photobioreactor Development for Space Applications

    Data.gov (United States)

    National Aeronautics and Space Administration — Capability for controlled and efficient cultivation of microbial cells in microgravity environments opens the possibility for a plethora of applications. One such...

  12. Application of the MERIT survey in the multi-criteria quality assessment of occupational health and safety management.

    Science.gov (United States)

    Korban, Zygmunt

    2015-01-01

    Occupational health and safety management systems apply audit examinations as an integral element of these systems. The examinations are used to verify whether the undertaken actions are in compliance with the accepted regulations, whether they are implemented in a suitable way and whether they are effective. One of the earliest solutions of that type applied in the mining industry in Poland involved the application of audit research based on the MERIT survey (Management Evaluation Regarding Itemized Tendencies). A mathematical model applied in the survey facilitates the determination of assessment indexes WOPi for each of the assessed problem areas, which, among other things, can be used to set up problem area rankings and to determine an aggregate (synthetic) assessment. In the paper presented here, the assessment indexes WOPi were used to calculate a development measure, and the calculation process itself was supplemented with sensitivity analysis.

  13. Development and application of reactor noise diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Karlsson, Joakim K.H

    1999-04-01

    the paper presented here, we elaborate a modified and successful factorisation technique that takes the noise structure and the approximations performed into account. Due to an unseated fuel element, a local density wave oscillation appeared in the Swedish BWR Forsmark-1 in 1996. It is of great practical importance to locate the responsible element as soon as possible. We have developed a method for the localisation of such a thermohydraulic channel instability. The localisation method was tested on simulated data and then applied to a measurement taken in Forsmark-1 in early 1997. The results demonstrate the applicability and accuracy of the method. The noise present in the Ringhals PWRs has been investigated and in the course of this work, we have developed a new strategy towards the analysis of core barrel vibrations (CBM). This new approach unites the CBM analysis in the time and frequency domains. We have also developed and applied a new model for the determination of vibration properties such as the amplitude, amount of anisotropy and the preferred direction of the vibrations. This method is quantitative and suitable for long-term trend analysis of CBM vibrations 69 refs, 19 figs

  14. Development and application of reactor noise diagnostics

    International Nuclear Information System (INIS)

    Karlsson, Joakim K.H.

    1999-04-01

    presented here, we elaborate a modified and successful factorisation technique that takes the noise structure and the approximations performed into account. Due to an unseated fuel element, a local density wave oscillation appeared in the Swedish BWR Forsmark-1 in 1996. It is of great practical importance to locate the responsible element as soon as possible. We have developed a method for the localisation of such a thermohydraulic channel instability. The localisation method was tested on simulated data and then applied to a measurement taken in Forsmark-1 in early 1997. The results demonstrate the applicability and accuracy of the method. The noise present in the Ringhals PWRs has been investigated and in the course of this work, we have developed a new strategy towards the analysis of core barrel vibrations (CBM). This new approach unites the CBM analysis in the time and frequency domains. We have also developed and applied a new model for the determination of vibration properties such as the amplitude, amount of anisotropy and the preferred direction of the vibrations. This method is quantitative and suitable for long-term trend analysis of CBM vibrations

  15. General survey of recent development of photoemission spectroscopy

    International Nuclear Information System (INIS)

    Edamoto, Kazuyuki

    1994-01-01

    On the present state of the recent development of photoemission spectroscopy, by limiting the topics to the development of the spectroscopy proper and the development contributing to the progress of surface science, general explanation is made. As to the development that enabled to heighten spectrum resolution, surface core-level shift and the precise measurement of the Fermi surface of surface level are described, showing the example. Also a number of the developments which enabled the utilization of the light source, of which the wavelength is variable, and which was brought about by synchrotron radiation beam, were mentioned. Besides, spin polarized photoelectron spectroscopy, the development of photoelectron microscope and others are outlined. Photoemission spectroscopy is very useful for analyzing the electron condition of solid surfaces. There are two factors in heightening core level spectrum resolution, namely, heightening the resolution of an electron energy analyzer proper and the utilization of synchrotron radiation as a light source. High resolution core-level spectra, angle-resolved photoemission spectroscopy, and as the light source of which the wavelength is variable, resonance photoemission spectroscopy, constant initial state spectroscopy and soft X-ray photoemission spectroscopy, and as the recently developed spectroscopy, spin polarized photoemission spectroscopy, Auger photoelectron coincidence spectroscopy and photoelectron microscope are explained. (K.I.)

  16. Developing interviewer proficiency: A self-perception survey

    Directory of Open Access Journals (Sweden)

    Riin Kont-Kontson

    2013-04-01

    Full Text Available The article reports the findings of a survey among 440 teachers of English in Estonia who participate in the oral proficiency interview of the national examination in the English language as interviewers. Examining the results of the questionnaire statement by statement, the study reveals that interviewer behavioural patterns emerge during the interview, some of them threatening its validity.The understanding of interviewer competence is very diverse among the interviewers and the degree to which they adhere to the standards defined for the interviewers of national examination in the English langage in Estonia is sometimes quite low. The interviewers are often unable to separate their role as an interviewer from being a teacher; they transfer their teaching behaviour to the interviewing situation. The teachers have difficulties with identification of appropriate accommodation strategies as well as controlling the extent of interaction between the interviewer and the assessor. The authors suggest a number of interviewer training strategies to combat the problems. DOI: http://dx.doi.org/10.5128/ERYa9.08

  17. The Development and Preliminary Validation of the Behavior, Environment, and Changeability Survey (BECS)

    Science.gov (United States)

    Walsh, Jennifer R.; Hebert, Angel; Byrd-Bredbenner, Carol; Carey, Gale; Colby, Sarah; Brown-Esters, Onikia N.; Greene, Geoffrey; Hoerr, Sharon; Horacek, Tanya; Kattelmann, Kendra; Kidd, Tandalayo; Koenings, Mallory; Phillips, Beatrice; Shelnutt, Karla P.; White, Adrienne A.

    2012-01-01

    Objective: To develop and test the validity of the Behavior, Environment, and Changeability Survey (BECS) for identifying the importance and changeability of nutrition, exercise, and stress management behavior and related aspects of the environment. Design: A cross-sectional, online survey of the BECS and selected validated instruments. Setting:…

  18. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-10-15

    This report presents a description of the status of photovoltaic (PV) power systems in the 20 participating countries of the IEA Photovoltaic Power Systems Programme. A survey of the status of PV power systems applications and markets in each country has been conducted every two years for the past six years and biennial reports published. The decision has now been taken to move to shorter annual reports and this is the first such report. This report presents an overview of PV power systems applications and markets at the end of 1998 and analyses the trends in PV power systems implemented between 1992 and 1998. (author)

  19. Trends in photovoltaic applications. Survey report of selected IEA countries between 1992 and 1998

    International Nuclear Information System (INIS)

    1999-10-01

    This report presents a description of the status of photovoltaic (PV) power systems in the 20 participating countries of the IEA Photovoltaic Power Systems Programme. A survey of the status of PV power systems applications and markets in each country has been conducted every two years for the past six years and biennial reports published. The decision has now been taken to move to shorter annual reports and this is the first such report. This report presents an overview of PV power systems applications and markets at the end of 1998 and analyses the trends in PV power systems implemented between 1992 and 1998. (author)

  20. Bodiless Embodiment: A Descriptive Survey of Avatar Bodily Coherence in First-Wave Consumer VR Applications

    DEFF Research Database (Denmark)

    Murphy, Dooley Joel

    This preliminary study surveys whether/which avatar body parts are visible in first-wave consumer virtual reality (VR) applications for the HTC Vive (n = 200). A simple coding schema for assessing avatar bodily coherence (ABC) is piloted and evaluated. Results provide a snapshot of ABC in popular...... high-end VR applications in Q3 2016. It is reported (Table 1) that 86.5% of sampled items feature fully invisible avatars, 9% depict hands only, and 4.5% feature a head, torso, or legs, but still with some degree of bodily incoherence. Findings suggest that users may experience a sense of ownership and...

  1. Technology survey of electrical power generation and distribution for MIUS application

    Science.gov (United States)

    Gill, W. L.; Redding, T. E.

    1975-01-01

    Candidate electrical generation power systems for the modular integrated utility systems (MIUS) program are described. Literature surveys were conducted to cover both conventional and exotic generators. Heat-recovery equipment associated with conventional power systems and supporting equipment are also discussed. Typical ranges of operating conditions and generating efficiencies are described. Power distribution is discussed briefly. Those systems that appear to be applicable to MIUS have been indicated, and the criteria for equipment selection are discussed.

  2. The spaghetti calorimeter. Research, development, application

    Energy Technology Data Exchange (ETDEWEB)

    Scheel, C V

    1994-12-22

    The Spaghetti Calorimeter (SPACAL) is a detector intended primarily for the energy measurement of high-energy particles, but also provides spatial information and particle identification. It is a sampling calorimeter composed of plastic scintillating fibers, oriented in the direction of the particle, embedded in lead. The scintillation light is read out by photomultipliers, which are coupled to bunches of fibers through light guides, each forming a tower. It was developed as an electromagnetic (e.m.) and compensating hadronic calorimeter for use in future multi-TeV collider experiments. The largest prototype was installed for an alternative application as an hadronic calorimeter in the WA89 experiment, where it is used for the detection of neutrons resulting from {Sigma} decays. The basic concepts behind calorimetry are discussed in detail. Several prototypes were tested in beams of electrons and pions with energies up to 150 GeV. Resonable e.m. energy resolution, at {sigma}/E=12.9%/{radical}E[GeV]+1.23%, was measured. Excellent hadronic energy resolution was found, at 30.6%/{radical}E[GeV]+1.0%, but the calorimeter was found to be slightly undercompensating with e/h=1.15. The position of the shower barycenter for both electrons and pions was easily found according to the relative energy deposits in the calorimeter towers. The calorimeter was also found to be able to provide effective discrimination between electrons and hadrons. The performance of SPACAL in the WA89 experiment at the Omega spectrometer at CERN was studied with the reconstruction of beam {Sigma}{sup -}particles via its decay {Sigma}{sup -}{yields}n{pi}{sup -}. Details of the calibration of SPACAL with electrons and protons are presented. (orig.).

  3. The spaghetti calorimeter. Research, development, application

    International Nuclear Information System (INIS)

    Scheel, C.V.

    1994-01-01

    The Spaghetti Calorimeter (SPACAL) is a detector intended primarily for the energy measurement of high-energy particles, but also provides spatial information and particle identification. It is a sampling calorimeter composed of plastic scintillating fibers, oriented in the direction of the particle, embedded in lead. The scintillation light is read out by photomultipliers, which are coupled to bunches of fibers through light guides, each forming a tower. It was developed as an electromagnetic (e.m.) and compensating hadronic calorimeter for use in future multi-TeV collider experiments. The largest prototype was installed for an alternative application as an hadronic calorimeter in the WA89 experiment, where it is used for the detection of neutrons resulting from Σ decays. The basic concepts behind calorimetry are discussed in detail. Several prototypes were tested in beams of electrons and pions with energies up to 150 GeV. Resonable e.m. energy resolution, at σ/E=12.9%/√E[GeV]+1.23%, was measured. Excellent hadronic energy resolution was found, at 30.6%/√E[GeV]+1.0%, but the calorimeter was found to be slightly undercompensating with e/h=1.15. The position of the shower barycenter for both electrons and pions was easily found according to the relative energy deposits in the calorimeter towers. The calorimeter was also found to be able to provide effective discrimination between electrons and hadrons. The performance of SPACAL in the WA89 experiment at the Omega spectrometer at CERN was studied with the reconstruction of beam Σ - particles via its decay Σ - →nπ - . Details of the calibration of SPACAL with electrons and protons are presented. (orig.)

  4. Bottom Trawl Survey Protocol Development (HB0706, EK60)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Cruise objectives include: 1) Investigate performance characteristics of new research bottom trawl; 2) Develop standard operating procedures for the NEFSC Bottom...

  5. Architecture for the Development of Context-Sensitive Mobile Applications

    Directory of Open Access Journals (Sweden)

    Markus Aleksy

    2008-01-01

    Full Text Available Recent advances in the development of mobile terminals and the appropriate communication infrastructures have the consequence that new kinds of applications arise. This trend leads to more and more complex mobile client applications as well. In this paper, we present a generic architecture, which can be used for the development of context-sensitive mobile applications.

  6. Harassment in workplace among school teachers: development of a survey

    OpenAIRE

    Russo, Andrea; Milić, Ranko; Knežević, Bojana; Mulić, Rosanda; Mustajbegović, Jadranka

    2008-01-01

    Aim To develop a questionnaire on harassment in the workplace among teachers at primary and secondary schools. Methods We analyzed the existing questionnaires on harassment in the workplace and developed a new one was to specifically address harassment of teachers in the public education sector. The questionnaire was then experimentally applied to a sample of 764 primary and secondary school teachers in Split Dalmatia County, Croatia. It included three scales –exposure to harassment,...

  7. Survey of Postdoctorates at FFRDCs: Final Report [Federally Funded Research and Development Centers

    Energy Technology Data Exchange (ETDEWEB)

    Mulrow, Jeri

    2010-06-30

    The 2009 FFRDC survey collected the total number of postdocs employed by FFRDCs in the United States—categorized by source of support, citizenship, sex, and field of research—as of October 1, 2009. The universe for the 2009 GSS-FFRDC survey was the Master Government List of Federally Funded Research and Development Centers. The 2009 survey also contacted the NIH’s Intramural Research Program because it employs the largest number of postdocs in the federal government. The FFRDC survey collected data via a web instrument. Topics included the type of support the postdocs received (federal and nonfederal), their sex, citizenship, race/ethnicity, and field of research.

  8. Photo-Modeling and Cloud Computing. Applications in the Survey of Late Gothic Architectural Elements

    Science.gov (United States)

    Casu, P.; Pisu, C.

    2013-02-01

    This work proposes the application of the latest methods of photo-modeling to the study of Gothic architecture in Sardinia. The aim is to consider the versatility and ease of use of such documentation tools in order to study architecture and its ornamental details. The paper illustrates a procedure of integrated survey and restitution, with the purpose to obtain an accurate 3D model of some gothic portals. We combined the contact survey and the photographic survey oriented to the photo-modelling. The software used is 123D Catch by Autodesk an Image Based Modelling (IBM) system available free. It is a web-based application that requires a few simple steps to produce a mesh from a set of not oriented photos. We tested the application on four portals, working at different scale of detail: at first the whole portal and then the different architectural elements that composed it. We were able to model all the elements and to quickly extrapolate simple sections, in order to make a comparison between the moldings, highlighting similarities and differences. Working in different sites at different scale of detail, have allowed us to test the procedure under different conditions of exposure, sunshine, accessibility, degradation of surface, type of material, and with different equipment and operators, showing if the final result could be affected by these factors. We tested a procedure, articulated in a few repeatable steps, that can be applied, with the right corrections and adaptations, to similar cases and/or larger or smaller elements.

  9. A Mobile Application Development Strategy-Finding Model

    OpenAIRE

    MBAYEN MBAYEN, GHISLAIN EDGARD

    2013-01-01

    Nowadays there are several different types of ways to build a mobile application, through web technologies, or through mobile manufacturers’ languages. Thus, in this study we focus on the three major mobile application development strategies: Native, Hybrid, and Web to Native. This plurality of solutions renders the selection of a mobile application development strategy complex. Hence, this study aims at understanding how developers deal with the selection of a mobile development approach. Th...

  10. APPLICATION OF ELECTRONIC TACHEOMETER FOR PREAND POST-CONSTRUCTION SURVEY OF ELEVATOR SHAFT

    Directory of Open Access Journals (Sweden)

    M. S. Nesterionok

    2015-01-01

    Full Text Available Floor-by-floor survey of installed elements of an elevator shaft using coordinate method and tacheometer is also inhibited by the necessity to determine device installation points for floors of every mounting horizon that leads to additional measurements due to conditions of the completed building framework and presence of a great number of situational disturbances and then it entails significant time expenditure and diminution of accuracy in the obtained results. Technical capabilities of the modern electronic tacheometer substantially simplify an accomplishment of the mission because the device can be applied not only in function of vertical projection but it can be used for preand post-construction survey of the elevator shaft with the help of advanced radiation method. While using the given method the electronic tacheometer equipped with diagonal ocular is installed over a bearing sign in the elevator pit and control points of the elevator shaft are determined with the help of specially developed portable beam deflector in the form of disc with radius r, which is fixed to a handle rod and orientated perpendicularly to a laser beam. An innovation diagram for preand post-construction survey of elevator shaft has been developed while applying this type of deflector. The diagram is characterized by high efficiency due to the fact that one tacheometer installation makes it possible to execute highly accurate, complete plane and high-level surveying of the whole elevator shaft including doorways, door sills and jambs.The paper proposes a new method for pre and post construction survey of the elevator shaft using the electronic tacheometer while applying specially developed beam deflector that ensures a geometric fixing of one or simultaneously two surveying points to spatial coordinate system where the preand post-construction survey is carried out. The method is characterized by high geometric accuracy and technological efficiency.

  11. A SURVEY OF ASTRONOMICAL RESEARCH: A BASELINE FOR ASTRONOMICAL DEVELOPMENT

    International Nuclear Information System (INIS)

    Ribeiro, V. A. R. M.; Russo, P.; Cárdenas-Avendaño, A.

    2013-01-01

    Measuring scientific development is a difficult task. Different metrics have been put forward to evaluate scientific development; in this paper we explore a metric that uses the number of peer-reviewed, and when available non-peer-reviewed, research articles as an indicator of development in the field of astronomy. We analyzed the available publication record, using the Smithsonian Astrophysical Observatory/NASA Astrophysics Database System, by country affiliation in the time span between 1950 and 2011 for countries with a gross national income of less than 14,365 USD in 2010. This represents 149 countries. We propose that this metric identifies countries in ''astronomical development'' with a culture of research publishing. We also propose that for a country to develop in astronomy, it should invest in outside expert visits, send its staff abroad to study, and establish a culture of scientific publishing. Furthermore, we propose that this paper may be used as a baseline to measure the success of major international projects, such as the International Year of Astronomy 2009

  12. A web-based application for initial screening of living kidney donors: development, implementation and evaluation.

    Science.gov (United States)

    Moore, D R; Feurer, I D; Zavala, E Y; Shaffer, D; Karp, S; Hoy, H; Moore, D E

    2013-02-01

    Most centers utilize phone or written surveys to screen candidates who self-refer to be living kidney donors. To increase efficiency and reduce resource utilization, we developed a web-based application to screen kidney donor candidates. The aim of this study was to evaluate the use of this web-based application. Method and time of referral were tabulated and descriptive statistics summarized demographic characteristics. Time series analyses evaluated use over time. Between January 1, 2011 and March 31, 2012, 1200 candidates self-referred to be living kidney donors at our center. Eight hundred one candidates (67%) completed the web-based survey and 399 (33%) completed a phone survey. Thirty-nine percent of donors accessed the application on nights and weekends. Postimplementation of the web-based application, there was a statistically significant increase (p web-based application as opposed to telephone contact. Also, there was a significant increase (p = 0.025) in the total number of self-referrals post-implementation from 61 to 116 per month. An interactive web-based application is an effective strategy for the initial screening of donor candidates. The web-based application increased the ability to interface with donors, process them efficiently and ultimately increased donor self-referral at our center. © Copyright 2012 The American Society of Transplantation and the American Society of Transplant Surgeons.

  13. Development of a food to calorie converter mobile application: a ...

    African Journals Online (AJOL)

    Development of a food to calorie converter mobile application: a case study of ... have risen to the challenge of creating weight management software, they do not ... Our methodology includes an android application with an inbuilt SQLite ...

  14. Industrial robots in Europe - market, applications and developments

    Science.gov (United States)

    Schraft, R. D.

    1975-01-01

    Different companies involving a wide range of products and manufacturing processes were studied to define the requirements for industrial robots. A survey of all such automatic units offered on the world market was made to establish a data base. Principal applications include coating, spot welding, and loading and unloading operations.

  15. Novel Biomaterials Methodology, Development and Application

    Science.gov (United States)

    Traditionally the use of carbohydrate-based wound dressings including cotton, xerogels, charcoal cloth, alginates, chitosan and hydrogels, have afforded properties such as absorbency, ease of application and removal, bacterial protection, fluid balance, occlusion, and elasticity. Recent efforts in ...

  16. Continuous Integration in PHP web applications development

    OpenAIRE

    Hujer, Martin

    2011-01-01

    This work deals with continuous integration of web applications, especially those in PHP language. The main objective is the selection of the server for continuous integration, its deployment and configuration for continuous integration of PHP web applications. The first chapter describes the concept of continuous integration and its individual techniques. The second chapter deals with the choice of server for continuous integration and its basic settings. The third chapter contains an overvi...

  17. NASBE Study Group Surveys State Leadership Development Policy

    Science.gov (United States)

    Newman, Bobbi; Hull, Robert

    2015-01-01

    State board members, working in partnership with the Consortium for Policy Research in Education (CPRE) at the University of Pennsylvania, conducted an in-depth study of states' school leadership development policies and practices. Data from this study are being analyzed to determine ways that states can create systems and structures for…

  18. Senior Faculty Careers and Personal Development: A Survey.

    Science.gov (United States)

    Armour, Robert; And Others

    A total of 1,135 senior faculty from 6 institutions of higher education responded to a questionnaire designed to determine the relationships between personal and career development for senior college faculty and the similarities and differences in satisfaction among faculty from various disciplines. Responses from the questionnaire showed that…

  19. Local Government Administration and Development: A Survey of ...

    African Journals Online (AJOL)

    User

    The quest for development has been a major issue of concern to both domestic and foreign ... In the view of a scholar like Wraith, local government refers to locally .... the researchers and the simple percentage method used to analyze the data.

  20. Promoting institutional and organisational development in surveying and land administration

    DEFF Research Database (Denmark)

    Enemark, Stig; Greenway, Iain

    2006-01-01

    development, and outlines some of the key tools and techniques to be used in the institutional reform process. This process will normally include four steps: Where are we now (assessment of the current situation and needs); Where do we want to be (design of vision and mission); How do we get there (strategies...

  1. Is your dog empathic? Developing a Dog Emotional Reactivity Survey.

    Science.gov (United States)

    Szánthó, Flóra; Miklósi, Ádám; Kubinyi, Enikő

    2017-01-01

    toward their dogs were anthropomorphic (agreed more with the statement that "My dog thinks like a child"), perceived their dogs as more reactive to their emotions. This findings highlights the importance of testing the attitudes of the respondents when they assess the personality and the emotions of animals. The criterion validity of the Dog Emotional Reactivity Survey should be confirmed by objective behavioural tests.

  2. Developing, testing, and implementing a survey of scientist mentoring teachers as part of an RET: The GABI RET mentor survey.

    Science.gov (United States)

    Davey, B.

    2017-12-01

    The impacts of mentoring in education have been well established. Mentors have a large impact on their mentees and have been show to affect mentee attitudes towards learning, interest in subjects, future success, and more. While mentoring has a well-documented impact on the mentees, mentoring also has an impact on the mentors themselves. However, little has been studied empirically about these impacts. When we looked for a validated instrument that measured the impact of mentoring on the scientists working with the teachers, we found many anecdotal reports but no instruments that meet our specific needs. To this end, we developed, tested, and implemented our own instrument for measuring the impacts of mentoring on our scientist mentors. Our instrument contained both quantitative and qualitative items designed to reveal the effects of mentoring in two areas: 1) cognitive domain (mentoring, teaching, understanding K-12) and 2) affective domain (professional, personal, participation). We first shared our survey with experts in survey development and mentoring, gathered their feedback, and incorporated their suggestions into our instrument. We then had a subsection of our mentors complete the survey and then complete it again three to four days later (test-retest). Our survey has a high correlation for the test-retest quantitative items (0.93) and a high correlation (0.90) between the three reviewers of the qualitative items. From our findings, we feel we have a validated instrument (face, content, and contruct validity) that answers our research questions reliably. Our contribution to the study of mentoring of science teachers reveals a broad range of impacts on the mentors themselves including an improved understanding of the challenges of classroom teaching, a recognition of the importance of scientists working with science teachers, an enhanced ability to communicate their research and findings, and an increased interest and excitement for their own work.

  3. Survey into basics, concepts, applications, security and simulation of DHT and applications based on DHT technologies

    OpenAIRE

    Aaltonen, Petri

    2017-01-01

    Distributed architectures have emerged as a significant area of computing affecting the consumer domain more and more. Distributed data transfer has proven to be a suitable and convenient technology for efficiently transferring files across multiple peers interested in obtaining an identical copy of the same data – for example entertainment or a block of application data. Current technology when discussing decentralized distributed systems are based on the Distributed Hash Table structures. F...

  4. Survey of state water laws affecting coal slurry pipeline development

    Energy Technology Data Exchange (ETDEWEB)

    Rogozen, M.B.

    1980-11-01

    This report summarizes state water laws likely to affect the development of coal slurry pipelines. It was prepared as part of a project to analyze environmental issues related to energy transportation systems. Coal slurry pipelines have been proposed as a means to expand the existing transportation system to handle the increasing coal shipments that will be required in the future. The availability of water for use in coal slurry systems in the coal-producing states is an issue of major concern.

  5. Listening to firms : how to use firm-level surveys to assess constraints on private sector development

    OpenAIRE

    Stone, Andrew H.W.

    1992-01-01

    Firm-level surveys elicit information important to formulating sound policy advice and designing projects to promote private sector development. Drawing on recent World Bank experience in eight countries, the author advises why and how to implement targeted field surveys by answering the following questions: Why use targeted field surveys? How should surveys be focused and designed? What types of questions work best in surveys? How can surveys be oriented toward their target population? How s...

  6. DATA AND PROCESSING IN DEVELOPING ECCONOMIC APPLICATIONS

    Directory of Open Access Journals (Sweden)

    ADRIAN GHENCEA

    2011-04-01

    Full Text Available Economic Informatics originates in the industry economy and the electronic processing of information. A clear distinction is made between IT and economic informatics, and further between general and particular economic informatics (the particular economic informatics meaning administration, industrial informatics etc. Economic informatics is deemed to be an applicative science relating to the conception, working modality and representation of IT and communication systems, oriented towards companies which are using electronic computers. This paper pursues to integrate applications allowing the information systems to interconnect at informational level, by information sharing, and at service level, considering the control of the related processes in real time.

  7. Developing Android Applications with Flex 45

    CERN Document Server

    Tretola, Rich

    2011-01-01

    Ready to put your ActionScript 3 skills to work on mobile apps? This hands-on book walks you through the process of creating an Adobe AIR application from start to finish, using the Flex 4.5 framework. Move quickly from a basic Hello World application to complex interactions with Android APIs, and get complete code examples for working with Android device components-GPS, camera, gallery, accelerometer, multitouch display, and OS interactions. No matter how much Flex experience you have, this book is the ideal resource. Use Flash Builder 4.5 to create and debug a Flex Mobile projectChoose a la

  8. An Intelligent Tutoring System for Learning Android Applications UI Development

    OpenAIRE

    Al Rekhawi , Hazem Awni; Abu Naser , Samy S

    2018-01-01

    International audience; The paper describes the design of a web based intelligent tutoring system for teaching Android Applications Development to students to overcome the difficulties they face. The basic idea of this system is a systematic introduction into the concept of Android Application Development. The system presents the topic of Android Application Development and administers automatically generated problems for the students to solve. The system is automatically adapted at run time ...

  9. Trends in proliferation: a survey of recent developments

    International Nuclear Information System (INIS)

    Joshi, Manoj

    1995-01-01

    It would be a truism to say that the trends in the area of proliferation display positive and negative aspects. On the one hand, the steps being taken by the nuclear haves appear to be designed to maintain their nuclear hegemony forever; on the other, there are indications such as the support being extended to the proposed conventions for the ending of nuclear tests and the production of fissile material for weapons that the nuclear weapons states also realize that the problem cannot be solved unless they also participate in the process and accept non-discriminatory restraints. However, it is much too early to predict which way the situation will develop. (author). 34 refs

  10. Photography equipment and techniques. A survey of NASA developments

    Science.gov (United States)

    Derr, A. J.

    1972-01-01

    The Apollo program has been the most complex exploration ever attempted by man, requiring extensive research, development, and engineering in most of the sciences before the leap through space could begin. Photography has been used at each step of the way to document the efforts and activities, isolate mistakes, reveal new phenomena, and to record much that cannot be seen by the human eye. At the same time, the capabilities of photography were extended because of the need of meeting space requirements. The results of this work have been applied to community planning and ecology, for example, as well as to space and engineering. Special uses of standard equipment, modifications and new designs, as well as film combinations that indicate actual or potential ecological problems are described.

  11. The quality improvement attitude survey: Development and preliminary psychometric characteristics.

    Science.gov (United States)

    Dunagan, Pamela B

    2017-12-01

    To report the development of a tool to measure nurse's attitudes about quality improvement in their practice setting and to examine preliminary psychometric characteristics of the Quality Improvement Nursing Attitude Scale. Human factors such as nursing attitudes of complacency have been identified as root causes of sentinel events. Attitudes of nurses concerning use of Quality and Safety Education for nurse's competencies can be most challenging to teach and to change. No tool has been developed measuring attitudes of nurses concerning their role in quality improvement. A descriptive study design with preliminary psychometric evaluation was used to examine the preliminary psychometric characteristics of the Quality Improvement Nursing Attitude Scale. Registered bedside clinical nurses comprised the sample for the study (n = 57). Quantitative data were analysed using descriptive statistics and Cronbach's alpha reliability. Total score and individual item statistics were evaluated. Two open-ended items were used to collect statements about nurses' feelings regarding their experience in quality improvement efforts. Strong support for the internal consistency reliability and face validity of the Quality Improvement Nursing Attitude Scale was found. Total scale scores were high indicating nurse participants valued Quality and Safety Education for Nurse competencies in practice. However, item-level statistics indicated nurses felt powerless when other nurses deviate from care standards. Additionally, the sample indicated they did not consistently report patient safety issues and did not have a feeling of value in efforts to improve care. Findings suggested organisational culture fosters nurses' reporting safety issues and feeling valued in efforts to improve care. Participants' narrative comments and item analysis revealed the need to generate new items for the Quality Improvement Nursing Attitude Scale focused on nurses' perception of their importance in quality and

  12. A survey on the application of robot techniques to an atomic power plant

    International Nuclear Information System (INIS)

    Hasegawa, Tsutomu; Sato, Tomomasa; Hirai, Shigeoki; Suehiro, Takashi; Okada, Tokuji

    1982-01-01

    Tasks of workers in atomic power plants have been surveyed from the viewpoint of necessity and possibility of their robotization. The daily tasks are classified into the following: (1) plant operation; (2) periodical examination; (3) patrol and inspection; (4) in-service inspection; (5) maintenance and repaire; (6) examination and production of the fuel; (7) waste disposal; (8) decommission of the plant. The necessity and present status of the robotization in atomic power plants are investigated according to the following classification: (1) inspection robots; (2) patrol inspection/maintenance robots; (3) hot cell robots; (4) plant decommission robots. The following have been made clear through the survey: (1) Various kinds of tasks are necessary for an atomic power plant: (2) Because of most of the tasks taking place in intense radiation environments, it is necessary to introduce robots into atomic power plants: (3) In application of robots in atomic power plant systems, it is necessary to take account of various severe conditions concerning spatial restrictions, radioactive endurance and reliability. Lastly wide applicability of the techniques of knowledge robots, which operate interactively with men, has been confirmed as a result of the survey. (author)

  13. INS/GNSS Integration for Aerobatic Flight Applications and Aircraft Motion Surveying.

    Science.gov (United States)

    V Hinüber, Edgar L; Reimer, Christian; Schneider, Tim; Stock, Michael

    2017-04-26

    This paper presents field tests of challenging flight applications obtained with a new family of lightweight low-power INS/GNSS ( inertial navigation system/global satellite navigation system ) solutions based on MEMS ( micro-electro-mechanical- sensor ) machined sensors, being used for UAV ( unmanned aerial vehicle ) navigation and control as well as for aircraft motion dynamics analysis and trajectory surveying. One key is a 42+ state extended Kalman-filter-based powerful data fusion, which also allows the estimation and correction of parameters that are typically affected by sensor aging, especially when applying MEMS-based inertial sensors, and which is not yet deeply considered in the literature. The paper presents the general system architecture, which allows iMAR Navigation the integration of all classes of inertial sensors and GNSS ( global navigation satellite system ) receivers from very-low-cost MEMS and high performance MEMS over FOG ( fiber optical gyro ) and RLG ( ring laser gyro ) up to HRG ( hemispherical resonator gyro ) technology, and presents detailed flight test results obtained under extreme flight conditions. As a real-world example, the aerobatic maneuvers of the World Champion 2016 (Red Bull Air Race) are presented. Short consideration is also given to surveying applications, where the ultimate performance of the same data fusion, but applied on gravimetric surveying, is discussed.

  14. Fiscal 1999 survey report. Survey and research concerning development of next-generation chemical process technologies; 1999 nendo jisedai kagaku process gijutsu kaihatsu ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    To further enhance resource/energy conservation and environmental impact reduction, it is necessary to develop innovative chemical reaction process technologies. It is for this reason that 'development of next-generation chemical reaction process technologies' is being carried out under the New Sunshine Program. The survey and research, for the fulfilment of the above goal, aim to select important technologies and put in a easy-to-study order the problems contained in associated technologies for picking out tasks for future studies for the purpose of suggesting some subjects to be taken up for future development. In addition, studies are made about how a comprehensive technology assessment system should be. In this fiscal year, propositions are compiled for research and development projects on five subjects. Studies of subjects other than these five will also continue to eventually build concrete propositions on them. The said five subjects involve 1) the development and application of nonaqueous biotechnologies, 2) biotechnology-aided polymeric material creation processes, 3) construction of high-efficiency energy conservation processes using innovative grain handling technologies in the high-temperature reaction field, 4) manufacture of high-performance polymeric materials for batteries and development of battery fabrication processes, and 5) the development of an energy conservation process maximally utilizing environmentally-friendly polyolefin. (NEDO)

  15. Fiscal 1999 survey report. Survey and research concerning development of next-generation chemical process technologies; 1999 nendo jisedai kagaku process gijutsu kaihatsu ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    To further enhance resource/energy conservation and environmental impact reduction, it is necessary to develop innovative chemical reaction process technologies. It is for this reason that 'development of next-generation chemical reaction process technologies' is being carried out under the New Sunshine Program. The survey and research, for the fulfilment of the above goal, aim to select important technologies and put in a easy-to-study order the problems contained in associated technologies for picking out tasks for future studies for the purpose of suggesting some subjects to be taken up for future development. In addition, studies are made about how a comprehensive technology assessment system should be. In this fiscal year, propositions are compiled for research and development projects on five subjects. Studies of subjects other than these five will also continue to eventually build concrete propositions on them. The said five subjects involve 1) the development and application of nonaqueous biotechnologies, 2) biotechnology-aided polymeric material creation processes, 3) construction of high-efficiency energy conservation processes using innovative grain handling technologies in the high-temperature reaction field, 4) manufacture of high-performance polymeric materials for batteries and development of battery fabrication processes, and 5) the development of an energy conservation process maximally utilizing environmentally-friendly polyolefin. (NEDO)

  16. Slit Lamp-Based Ocular Scoring Systems in Toxicology and Drug Development: A Literature Survey.

    Science.gov (United States)

    Eaton, Joshua Seth; Miller, Paul E; Bentley, Ellison; Thomasy, Sara M; Murphy, Christopher J

    2017-12-01

    To present a survey of the features of published slit lamp-based scoring systems and their applicability in the context of modern ocular toxicology and drug development. References describing original or modified slit lamp-based scoring systems for human or veterinary clinical patients or in investigative or toxicologic research were collected following a comprehensive literature review using textbooks and online publication searches. Each system's indications and features were compiled to facilitate comparison. Literature review identified 138 original or modified scoring systems. Most (48%) were published for evaluation of the ocular surface, 34% for the general anterior segment, and 18% for the lens. Most systems were described for assessment of human patients (50%) and small albino laboratory species such as rabbits (19%), rats (12%), and mice (8%). Systems described for pigmented laboratory species and for larger species such as dogs, cats, pigs, and nonhuman primates (NHPs) were comparatively underrepresented. No systems described a lens scoring scheme specific to the dog, cat, pig, or NHP. Scoring schemes for aqueous and vitreous cells were infrequently described for laboratory species. Many slit lamp-based scoring systems have been published, but the features of each differ and complicate translation of findings between different species. Use and interpretation of any scoring system in toxicology and drug development must be done with awareness of the limitations of the system being used.

  17. Development and application of social learning theory.

    Science.gov (United States)

    Price, V; Archbold, J

    This article traces the development of social learning theory over the last 30 years, relating the developments to clinical nursing practice. Particular attention is focused on the contribution of Albert Bandura, the American psychologist, and his work on modelling.

  18. Application of agile methodologies in software development

    Directory of Open Access Journals (Sweden)

    Jovanović Aca D.

    2016-01-01

    Full Text Available The paper presents the potentials for the development of software using agile methodologies. Special consideration is devoted to the potentials and advantages of use of the Scrum methodology in the development of software and the relationship between the implementation of agile methodologies and the software development projects.

  19. Fiscal 1998 New Sunshine Program achievement report. Development for practical application of photovoltaic system - Development of ultrahigh-efficiency crystalline compound solar cell manufacturing technology - Research and survey of peripheral element technologies (Research on practical application of set solar cell); 1998 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Chokokoritsu kessho kagobutsu taiyo denchi no seizo gijutsu kaihatsu / shuhen yoso gijutsu ni kansuru chosa kenkyu (shisshiki taiyo denchi jitsuyoka kanosei chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Possibility of practical application of dye-sensitized solar cells (Graezel cells) is discussed. Fine titania particle preparation conditions and titania thin-film electrodes were optimized and an energy conversion efficiency of 7.7% was accomplished. The screen printing method was applied to the manufacture of dye-sensitized electrodes, and performance governing factors were grasped. The use of the screen printing method resulted in a conversion efficiency of 6-8.4% when the factors were optimized. Though lower than the 10% in the Graezel report, values near that were obtained. The status of latest research and development is compiled involving studies about electron transfer dynamics in dye-sensitized solar cells, manufacture of sensitizing dyes and mesoscopic metal oxide thin-film, electron transfer layers and their physical properties, and solidification of hole transfer layers. Research was conducted aiming at their practical application, and tasks and problems in each of the said items were point out. A logical approach to achieve high conversion efficiency was deliberated, and studies were made about how to propel forward endeavors involving design guidelines for high-performance sensitizing dyes, design and preparation guidelines for thin film for electrodes, analysis of stability, solidification of the redox electrolyte, etc. (NEDO)

  20. A review of brain-computer interface games and an opinion survey from researchers, developers and users.

    Science.gov (United States)

    Ahn, Minkyu; Lee, Mijin; Choi, Jinyoung; Jun, Sung Chan

    2014-08-11

    In recent years, research on Brain-Computer Interface (BCI) technology for healthy users has attracted considerable interest, and BCI games are especially popular. This study reviews the current status of, and describes future directions, in the field of BCI games. To this end, we conducted a literature search and found that BCI control paradigms using electroencephalographic signals (motor imagery, P300, steady state visual evoked potential and passive approach reading mental state) have been the primary focus of research. We also conducted a survey of nearly three hundred participants that included researchers, game developers and users around the world. From this survey, we found that all three groups (researchers, developers and users) agreed on the significant influence and applicability of BCI and BCI games, and they all selected prostheses, rehabilitation and games as the most promising BCI applications. User and developer groups tended to give low priority to passive BCI and the whole head sensor array. Developers gave higher priorities to "the easiness of playing" and the "development platform" as important elements for BCI games and the market. Based on our assessment, we discuss the critical point at which BCI games will be able to progress from their current stage to widespread marketing to consumers. In conclusion, we propose three critical elements important for expansion of the BCI game market: standards, gameplay and appropriate integration.

  1. A Review of Brain-Computer Interface Games and an Opinion Survey from Researchers, Developers and Users

    Directory of Open Access Journals (Sweden)

    Minkyu Ahn

    2014-08-01

    Full Text Available In recent years, research on Brain-Computer Interface (BCI technology for healthy users has attracted considerable interest, and BCI games are especially popular. This study reviews the current status of, and describes future directions, in the field of BCI games. To this end, we conducted a literature search and found that BCI control paradigms using electroencephalographic signals (motor imagery, P300, steady state visual evoked potential and passive approach reading mental state have been the primary focus of research. We also conducted a survey of nearly three hundred participants that included researchers, game developers and users around the world. From this survey, we found that all three groups (researchers, developers and users agreed on the significant influence and applicability of BCI and BCI games, and they all selected prostheses, rehabilitation and games as the most promising BCI applications. User and developer groups tended to give low priority to passive BCI and the whole head sensor array. Developers gave higher priorities to “the easiness of playing” and the “development platform” as important elements for BCI games and the market. Based on our assessment, we discuss the critical point at which BCI games will be able to progress from their current stage to widespread marketing to consumers. In conclusion, we propose three critical elements important for expansion of the BCI game market: standards, gameplay and appropriate integration.

  2. Survey of systems safety analysis methods and their application to nuclear waste management systems

    International Nuclear Information System (INIS)

    Pelto, P.J.; Winegardner, W.K.; Gallucci, R.H.V.

    1981-11-01

    This report reviews system safety analysis methods and examines their application to nuclear waste management systems. The safety analysis methods examined include expert opinion, maximum credible accident approach, design basis accidents approach, hazard indices, preliminary hazards analysis, failure modes and effects analysis, fault trees, event trees, cause-consequence diagrams, G0 methodology, Markov modeling, and a general category of consequence analysis models. Previous and ongoing studies on the safety of waste management systems are discussed along with their limitations and potential improvements. The major safety methods and waste management safety related studies are surveyed. This survey provides information on what safety methods are available, what waste management safety areas have been analyzed, and what are potential areas for future study

  3. Survey of systems safety analysis methods and their application to nuclear waste management systems

    Energy Technology Data Exchange (ETDEWEB)

    Pelto, P.J.; Winegardner, W.K.; Gallucci, R.H.V.

    1981-11-01

    This report reviews system safety analysis methods and examines their application to nuclear waste management systems. The safety analysis methods examined include expert opinion, maximum credible accident approach, design basis accidents approach, hazard indices, preliminary hazards analysis, failure modes and effects analysis, fault trees, event trees, cause-consequence diagrams, G0 methodology, Markov modeling, and a general category of consequence analysis models. Previous and ongoing studies on the safety of waste management systems are discussed along with their limitations and potential improvements. The major safety methods and waste management safety related studies are surveyed. This survey provides information on what safety methods are available, what waste management safety areas have been analyzed, and what are potential areas for future study.

  4. DATA ACQUISITION AND APPLICATIONS OF SIDE-LOOKING AIRBORNE RADAR IN THE U. S. GEOLOGICAL SURVEY.

    Science.gov (United States)

    Jones, John Edwin; Kover, Allan N.

    1985-01-01

    The Side-Looking Airborne Radar (SLAR) program encompasses a multi-discipline effort involving geologists, hydrologists, engineers, geographers, and cartographers of the U. S. Geological Survey (USGS). Since the program began in 1980, more than 520,000 square miles of aerial coverage of SLAR data in the conterminous United States and Alaska have been acquired or contracted for acquisition. The Geological Survey has supported more than 60 research and applications projects addressing the use of this technology in the earth sciences since 1980. These projects have included preparation of lithographic reproductions of SLAR mosaics, research to improve the cartographic uses of SLAR, research for use of SLAR in assessing earth hazards, and studies using SLAR for energy and mineral exploration through improved geologic mapping.

  5. Development and Applications of Portable Biosensors.

    Science.gov (United States)

    Srinivasan, Balaji; Tung, Steve

    2015-08-01

    The significance of microfluidics-based and microelectromechanical systems-based biosensors has been widely acknowledged, and many reviews have explored their potential applications in clinical diagnostics, personalized medicine, global health, drug discovery, food safety, and forensics. Because health care costs are increasing, there is an increasing need to remotely monitor the health condition of patients by point-of-care-testing. The demand for biosensors for detection of biological warfare agents has increased, and research is focused on ways of producing small portable devices that would allow fast, accurate, and on-site detection. In the past decade, the demand for rapid and accurate on-site detection of plant disease diagnosis has increased due to emerging pathogens with resistance to pesticides, increased human mobility, and regulations limiting the application of toxic chemicals to prevent spread of diseases. The portability of biosensors for on-site diagnosis is limited due to various issues, including sample preparation techniques, fluid-handling techniques, the limited lifetime of biological reagents, device packaging, integrating electronics for data collection/analysis, and the requirement of external accessories and power. Many microfluidic, electronic, and biological design strategies, such as handling liquids in biosensors without pumps/valves, the application of droplet-based microfluidics, paper-based microfluidic devices, and wireless networking capabilities for data transmission, are being explored. © 2015 Society for Laboratory Automation and Screening.

  6. Development of Green Box sensor module technologies for rail applications

    Energy Technology Data Exchange (ETDEWEB)

    Rey, D.; Breeding, R. [Sandia National Labs., Albuquerque, NM (United States); Hogan, J.; Mitchell, J. [Sandia National Labs., Livermore, CA (United States); McKeen, R.G. [New Mexico Engineering Research Inst., Albuquerque, NM (United States); Brogan, J. [New Mexico Univ., Albuquerque, NM (United States)

    1996-04-01

    Results of a joint Sandia National Laboratories, University of New Mexico, and New Mexico Engineering Research Institute project to investigate an architecture implementing real-time monitoring and tracking technologies in the railroad industry is presented. The work, supported by the New Mexico State Transportation Authority, examines a family of smart sensor products that can be tailored to the specific needs of the user. The concept uses a strap-on sensor package, designed as a value-added component, integrated into existing industry systems and standards. Advances in sensor microelectronics and digital signal processing permit us to produce a class of smart sensors that interpret raw data and transmit inferred information. As applied to freight trains, the sensors` primary purpose is to minimize operating costs by decreasing losses due to theft, and by reducing the number, severity, and consequence of hazardous materials incidents. The system would be capable of numerous activities including: monitoring cargo integrity, controlling system braking and vehicle acceleration, recognizing component failure conditions, and logging sensor data. A cost-benefit analysis examines the loss of revenue resulting from theft, hazardous materials incidents, and accidents. Customer survey data are combined with the cost benefit analysis and used to guide the product requirements definition for a series of specific applications. A common electrical architecture is developed to support the product line and permit rapid product realization. Results of a concept validation, which used commercial hardware and was conducted on a revenue-generating train, are also reported.

  7. Development and application of charcoal sorbents for cryopumping fusion devices

    Energy Technology Data Exchange (ETDEWEB)

    Sedgley, D.W. (Grumman Corp., Bethpage, NY (USA). Space Systems Div.)

    1989-06-01

    Progress has been made in defining the capabilities of charcoal as the most promising absorbent to be used in cryopumps for fusion power application. The capabilities of alternative methods of cryopumping helium have been examined in a literature survey and by test, and the results are described here. Considerations include pumping speed, capacity to accumulate pumped gas, ease of reconditioning, use of alternative materials and tolerance to the fusion environment. Vacuum pumps for future fusion devices must handle large quantities of helium/hydrogen isotopes and other impurities. Cryopumps or turbomolecular pumps have demonstrated the capability on a small scale, and each has an important advantage: TMPs do not accumulate gases; cryopumps can separate helium from other effluents. This paper includes a review of a method for selecting charcoals for helium cryopumping, testing of a continuously operating cryopump system, and definition of a design that is based on the requirements of the Next European Torus. Tritium limits are satisfied. The pump design incorporates the charcoal sorbent system that has been recently developed and is based on a reasonable extrapolation of current state-of-the-art. Evaluation of alternative methods of separating helium and other gases led to selection of a movable barrier as the preferred solution. (orig.).

  8. Developing an M-Learning Application for iOS

    Directory of Open Access Journals (Sweden)

    Paul POCATILU

    2013-01-01

    Full Text Available The mobile market development has a high impact on all domains including education. Smart mobile devices started to be affordable and the massive use on educational processes does not seem to be too far. Mobile learning applications are be targeted for all major mobile operating systems as native applications or Web-based. The objective of this paper is to present the implementation of the evaluation module for an m-learning application developed for iOS devices. The m-learning application is targeted to a higher education institution. The application uses Web services in order to obtain the content and to authenticate the users.

  9. Disclosure Control using Partially Synthetic Data for Large-Scale Health Surveys, with Applications to CanCORS

    OpenAIRE

    Loong, Bronwyn; Zaslavsky, Alan M.; He, Yulei; Harrington, David P.

    2013-01-01

    Statistical agencies have begun to partially synthesize public-use data for major surveys to protect the confidentiality of respondents’ identities and sensitive attributes, by replacing high disclosure risk and sensitive variables with multiple imputations. To date, there are few applications of synthetic data techniques to large-scale healthcare survey data. Here, we describe partial synthesis of survey data collected by CanCORS, a comprehensive observational study of the experiences, treat...

  10. SproutCore web application development

    CERN Document Server

    Keating, Tyler

    2013-01-01

    Written as a practical, step-by-step tutorial, Creating HTML5 Apps with SproutCore is full of engaging examples to help you learn in a practical context.This book is for any person looking to write software for the Web or already writing software for the Web. Whether your background is in web development or in software development, Creating HTML5 Apps with SproutCore will help you expand your skills so that you will be ready to apply the software development principles in the web development space.

  11. Xamarin mobile application development for Android

    CERN Document Server

    Reynolds, Mark

    2014-01-01

    A step-by-step tutorial that follows the development of a simple Android app from end to end, through troubleshooting, and then distribution. The language used assumes a knowledge of basic C#.If you are a C# developer with a desire to develop Android apps and want to enhance your existing skill set, then this book is for you. It is assumed that you have a good working knowledge of C#, .NET, and object-oriented software development. Familiarity with rich client technologies such as WPF or Silverlight is also helpful, but not required.

  12. Instant Yii 11 application development starter

    CERN Document Server

    Mumm, Jacob

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. A concise guide that delivers immediate results with practical recipes that give you useful hints and tips on avoiding the pitfalls in Eclipse 4 development.This book is aimed at developers with some basic programming experience and a general understanding of relational databases, or anyone who is ready to take their development to the next level with framework-driven development. A basic understanding of MySQL, PHP, HTML, and HTTP is expected.

  13. Strategic Leadership Development: An Operation Domain Application

    National Research Council Canada - National Science Library

    Hatfield, Berlain

    1997-01-01

    .... The success or failure of these goals rests upon the leadership effectiveness. Understanding the identification and development of effective leadership skills and attributes maximize individual leadership effectiveness...

  14. Development and Application of Assessment Standards to Advanced Written Assignments

    Science.gov (United States)

    Miihkinen, Antti; Virtanen, Tuija

    2018-01-01

    This study describes the results of a project that focused on developing an assessment rubric to be used as the assessment criteria for the written thesis of accounting majors and the quality of the coursework during the seminar. We used descriptive analysis and the survey method to collect information for the development work and to examine the…

  15. The current state of Bayesian methods in medical product development: survey results and recommendations from the DIA Bayesian Scientific Working Group.

    Science.gov (United States)

    Natanegara, Fanni; Neuenschwander, Beat; Seaman, John W; Kinnersley, Nelson; Heilmann, Cory R; Ohlssen, David; Rochester, George

    2014-01-01

    Bayesian applications in medical product development have recently gained popularity. Despite many advances in Bayesian methodology and computations, increase in application across the various areas of medical product development has been modest. The DIA Bayesian Scientific Working Group (BSWG), which includes representatives from industry, regulatory agencies, and academia, has adopted the vision to ensure Bayesian methods are well understood, accepted more broadly, and appropriately utilized to improve decision making and enhance patient outcomes. As Bayesian applications in medical product development are wide ranging, several sub-teams were formed to focus on various topics such as patient safety, non-inferiority, prior specification, comparative effectiveness, joint modeling, program-wide decision making, analytical tools, and education. The focus of this paper is on the recent effort of the BSWG Education sub-team to administer a Bayesian survey to statisticians across 17 organizations involved in medical product development. We summarize results of this survey, from which we provide recommendations on how to accelerate progress in Bayesian applications throughout medical product development. The survey results support findings from the literature and provide additional insight on regulatory acceptance of Bayesian methods and information on the need for a Bayesian infrastructure within an organization. The survey findings support the claim that only modest progress in areas of education and implementation has been made recently, despite substantial progress in Bayesian statistical research and software availability. Copyright © 2013 John Wiley & Sons, Ltd.

  16. Breaking through the glass ceiling: a survey of promotion rates of graduates of a primary care Faculty Development Fellowship Program.

    Science.gov (United States)

    Smith, Mindy A; Barry, Henry C; Dunn, Ruth Ann; Keefe, Carole; Weismantel, David

    2006-01-01

    Academic promotion has been difficult for women and faculty of minority race. We investigated whether completion of a faculty development fellowship would equalize promotion rates of female and minority graduates to those of male and white graduates. All graduates of the Michigan State University Primary Care Faculty Development Fellowship Program from 1989-1998 were sent a survey in 1999, which included questions about academic status and appointment. We compared application and follow-up survey data by gender and race/ethnicity. Telephone calls were made to nonrespondents. A total of 175 (88%) graduating fellows responded to the follow-up survey. Information on academic rank at entry and follow-up was obtained from 28 of 48 fellows with missing information on promotion. Male and female graduates achieved similar academic promotion at follow-up, but there was a trend toward lower promotion rates for minority faculty graduates compared to white graduates. In the multivariate analysis, however, only age, years in rank, initial rank, and type of appointment (academic versus clinical) were significant factors for promotion. Academic advancement is multifactorial and appears most related to time in rank, stage of life, and career choice. Faculty development programs may be most useful in providing skill development and career counseling.

  17. Wireless application guidelines for usability design and evaluation for developing countries

    International Nuclear Information System (INIS)

    Khoja, S.A.; Ursani, A.A.; Ali, A.

    2009-01-01

    The aim of this paper is to provide guidelines for designing wireless applications. These guidelines are developed with the help of Human Computer Interaction based Usability Evaluation surveys and tests results. These guidelines will help in making wireless applications more usable and attractive for users and will help designers to plan effective interactive applications. The guidelines presented in the paper have been derived from the results of surveys, usability tests and SET (Summative Evaluation Tests) carried out over 200 people of Karachi, Pakistan, from different walks of life with different academic and professional backgrounds, making imperative suggestions not only to improve the usability of exciting features given in wireless and mobile products, but also provide suggestions to improve usability of basic components such as, text, navigation, interactivity, multimedia, control and behavior. (author)

  18. Report on the Survey of the Design Review of New Reactor Applications. Volume 3: Reactor

    International Nuclear Information System (INIS)

    Downey, Steven; Monninger, John; Nevalainen, Janne; Lorin, Aurelie; ); Webster, Philip; Joyer, Philippe; Kawamura, Tomonori; Lankin, Mikhail; Kubanyi, Jozef; Haluska, Ladislav; Persic, Andreja; Reierson, Craig; Kang, Kyungmin; Kim, Walter

    2016-01-01

    At the tenth meeting of the CNRA Working Group on the Regulation of New Reactors (WGRNR) in March 2013, the Working Group agreed to present the responses to the Second Phase, or Design Phase, of the Licensing Process Survey as a multi-volume text. As such, each report will focus on one of the eleven general technical categories covered in the survey. The general technical categories were selected to conform to the topics covered in the International Atomic Energy Agency (IAEA) Safety Guide GS-G-4.1. This document, which is the third report on the results of the Design Phase Survey, focuses on the Reactor. The Reactor category includes the following technical topics: fuel system design, reactor internals and core support, nuclear design and core nuclear performance, thermal and hydraulic design, reactor materials, and functional design of reactivity control system. For each technical topic, the member countries described the information provided by the applicant, the scope and level of detail of the technical review, the technical basis for granting regulatory authorisation, the skill sets required and the level of effort needed to perform the review. Based on a comparison of the information provided by the member countries in response to the survey, the following observations were made: - Although the description of the information provided by the applicant differs in scope and level of detail among the member countries that provided responses, there are similarities in the information that is required. - All of the technical topics covered in the survey are reviewed in some manner by all of the regulatory authorities that provided responses. - Design review strategies most commonly used to confirm that the regulatory requirements have been met include document review and independent verification of calculations, computer codes, or models used to describe the design and performance of the core and the fuel. - It is common to consider operating experience and

  19. Survey Response-Related Biases in Contingent Valuation: Concepts, Remedies, and Empirical Application to Valuing Aquatic Plant Management

    Science.gov (United States)

    Mark L. Messonnier; John C. Bergstrom; Chrisopher M. Cornwell; R. Jeff Teasley; H. Ken Cordell

    2000-01-01

    Simple nonresponse and selection biases that may occur in survey research such as contingent valuation applications are discussed and tested. Correction mechanisms for these types of biases are demonstrated. Results indicate the importance of testing and correcting for unit and item nonresponse bias in contingent valuation survey data. When sample nonresponse and...

  20. Developing an eco-routing application.

    Science.gov (United States)

    2014-01-01

    The study develops eco-routing algorithms and investigates and quantifies the system-wide impacts of implementing an eco-routing system. Two eco-routing algorithms are developed: one based on vehicle sub-populations (ECO-Subpopulation Feedback Assign...