Design of a statewide radiation survey

International Nuclear Information System (INIS)

Nagda, N.L.; Koontz, M.D.; Rector, H.E.; Nifong, G.D.

1989-01-01

The Florida Institute of Phosphate Research (FIPR) recently sponsored a statewide survey to identify all significant land areas in Florida where the state's environmental radiation rule should be applied. Under this rule, newly constructed buildings must be tested for radiation levels unless approved construction techniques are used. Two parallel surveys - a land-based survey and a population-based survey - were designed and conducted to address the objective. Each survey included measurements in more than 3000 residences throughout the state. Other information sources that existed at the outset of the study, such as geologic profiles mapped by previous investigators and terrestrial uranium levels characterized through aerial gamma radiation surveys, were also examined. Initial data analysis efforts focused on determining the extent of evidence of radon potential for each of 67 counties in the state. Within 18 countries that were determined to have definite evidence of elevated radon potential, more detailed spatial analyses were conducted to identify areas of which the rule should apply. A total of 74 quadrangles delineated by the U.S. Geological Survey, representing about 7% of those constituting the state, were identified as having elevated radon potential and being subject to the rule

Designing an Effective Survey

National Research Council Canada - National Science Library

Kasunic, Mark

2005-01-01

... of them. However, to protect the validity of conclusions drawn from a survey, certain procedures must be followed throughout the process of designing, developing, and distributing the survey questionnaire...

Quality Control in Survey Design: Evaluating a Survey of Educators’ Attitudes Concerning Differentiated Compensation

OpenAIRE

Kelly D. Bradley; Michael Peabody; Shannon O. Sampson

2015-01-01

This study utilized the Rasch model to assess the quality of a survey instrument designed to measure attitudes of administrators and teachers concerning a differentiated teacher compensation program piloted in Kentucky.  Researchers addressing potentially contentious issues should ensure their methods stand up to rigorous criticism.  The results indicate that the rating scale does not function as expected, with items being too easy to endorse.  Future iterations of this survey should be revis...

A Primer for Conducting Survey Research Using MTurk: Tips for the Field

Science.gov (United States)

Chambers, Silvana; Nimon, Kim; Anthony-McMann, Paula

2016-01-01

This paper presents best practices for conducting survey research using Amazon Mechanical Turk (MTurk). Readers will learn the benefits, limitations, and trade-offs of using MTurk as compared to other recruitment services, including SurveyMonkey and Qualtrics. A synthesis of survey design guidelines along with a sample survey are presented to help…

Mixing modes in a population-based interview survey: comparison of a sequential and a concurrent mixed-mode design for public health research.

Science.gov (United States)

Mauz, Elvira; von der Lippe, Elena; Allen, Jennifer; Schilling, Ralph; Müters, Stephan; Hoebel, Jens; Schmich, Patrick; Wetzstein, Matthias; Kamtsiuris, Panagiotis; Lange, Cornelia

2018-01-01

the two designs. Modelling these results for higher response rates and larger net sample sizes indicated that the sequential design was more cost and time-effective. This study contributes to the research available on implementing mixed-mode designs as part of public health surveys. Our findings show that SAQ-Paper and SAQ-Web questionnaires can be combined effectively. Sequential mixed-mode designs with higher rates of online respondents may be of greater benefit to studies with larger net sample sizes than concurrent mixed-mode designs.

RESEARCH UTILIZATION IN THE DESIGN DECISION MAKING PROCESS

Directory of Open Access Journals (Sweden)

Amy Huber

2016-04-01

Full Text Available This article summarizes findings from a national survey of interior design practitioners in the United States (N=366.  The study explored interior design practitioners' current preferences for conducting project research including: activities conducted and sources used, attraction to and recall from sources, and ideas for communicating research findings. Responses suggest that interior designers do value research, yet have little time to utilize research. While cross-tabulation analyses indicate no major differences in research activities between the study’s demographic groups, collectively, only 12% of the sample indicated they utilized academic journals and, at times, even incorrectly identified those sources. Open-ended responses allowed designers to offer ideas for communicating research and four key themes emerged, including: topic selection and relevancy, ideas for new dissemination methods, ideas for presentation style, and perceptions of the written language used.  It is hoped that this study’s findings may help design researchers better communicate their own findings to design practitioners.

Understanding Sample Surveys: Selective Learning about Social Science Research Methods

Science.gov (United States)

Currin-Percival, Mary; Johnson, Martin

2010-01-01

We investigate differences in what students learn about survey methodology in a class on public opinion presented in two critically different ways: with the inclusion or exclusion of an original research project using a random-digit-dial telephone survey. Using a quasi-experimental design and data obtained from pretests and posttests in two public…

[Research interest by general practitioners: a survey].

Science.gov (United States)

Rossi, S; Zoller, M; Steurer, J

2006-12-06

For doing research on topics in primary care medicine participation of primary care physicians is necessary. Research in this field of medicine is only marginally established in Switzerland. In a postal survey we evaluate the general attitudes of physicians towards research in the field of primary care. In particular we were interested in their willingness to participate in research projects and the facilitating and impeding factors to take part in such projects. A purpose designed questionnaire was sent by post to 3044 primary care physicians in the central and eastern parts of Switzerland. The return rate was 52%. A majority of 94% of the responding physicians revealed interest in primary care research and 60% of all responders are willing to participate actively in such projects. They are prepared to spend about 15 min a day for data acquisition. Their willingness to participate depends on the conditions that, first, the research topic is relevant for daily practice and, second, boards odder Continuous Medical Education credits for time spent for research. Time constraints, additional administrative work and lack of relevance of research topics to daily practice are the main barriers. This survey demonstrates the general interest of primary care physicians to participate in relevant research projects. Therefore the structure to set up such research should be established.

Design, Research, and Design Research: Synergies and Contradictions

Science.gov (United States)

Nelson, Wayne A.

2013-01-01

Notions of design, research, and design research in the field of educational technology are quite different from conceptualizations held by other design fields. Examining the ways that research is conducted and used in educational technology in comparison to other design fields can provide novel insights into how research and design practice can…

Participant dropout as a function of survey length in internet-mediated university studies: implications for study design and voluntary participation in psychological research.

Science.gov (United States)

Hoerger, Michael

2010-12-01

Internet-mediated research has offered substantial advantages over traditional laboratory-based research in terms of efficiently and affordably allowing for the recruitment of large samples of participants for psychology studies. Core technical, ethical, and methodological issues have been addressed in recent years, but the important issue of participant dropout has received surprisingly little attention. Specifically, web-based psychology studies often involve undergraduates completing lengthy and time-consuming batteries of online personality questionnaires, but no known published studies to date have closely examined the natural course of participant dropout during attempted completion of these studies. The present investigation examined participant dropout among 1,963 undergraduates completing one of six web-based survey studies relatively representative of those conducted in university settings. Results indicated that 10% of participants could be expected to drop out of these studies nearly instantaneously, with an additional 2% dropping out per 100 survey items included in the study. For individual project investigators, these findings hold ramifications for study design considerations, such as conducting a priori power analyses. The present results also have broader ethical implications for understanding and improving voluntary participation in research involving human subjects. Nonetheless, the generalizability of these conclusions may be limited to studies involving similar design or survey content.

Research Design

DEFF Research Database (Denmark)

2019-01-01

Gunnar Scott Reinbacher (editor) Antology.  Research Design : Validation in Social Sciences. Gunnar Scott Reinbacher: Introduction. Research design and validity. 15p Ole Riis: Creative Research design. 16 p Lennart Nørreklit: Validity in Research Design. 24p Gitte Sommer Harrits: Praxeological...... Scott Reinbacher: Multidisciplinary Research Designs in Problem Based Research. The case of an european project on chronical diseases, the Tandem project (Training Alternmative Networking Skills in Diabetes Management). 15p Niels Nørgaard Kristensen: A qualitative bottom up approach to post modern...... knowledge: An integrated strategy for combining "explaining" and "understanding". 22p Heidi Houlberg Salomonsen & Viola Burau: Comparative research designs. 40p Rasmus Antoft & Heidi Houlberg Salomonsen: Studying organizations by a Pragmatic Research Design: the case of qualitative case study  designs. 31p...

New tools for evaluating LQAS survey designs.

Science.gov (United States)

Hund, Lauren

2014-02-15

Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are provided for calculating the positive and negative predictive value of a design with respect to an underlying coverage distribution and the selected design parameters. These tools are illustrated using a data example from two consecutive LQAS surveys measuring Oral Rehydration Solution (ORS) preparation. Using the survey tools, the dependence of classification accuracy on benchmark selection and the width of the 'grey region' are clarified in the context of ORS preparation across seven supervision areas. Following the completion of an LQAS survey, estimation of the distribution of coverage across areas facilitates quantifying classification accuracy and can help guide intervention decisions.

African Primary Care Research: Performing surveys using questionnaires

OpenAIRE

Govender, Indiran; Mabuza, Langalibalele H.; Ogunbanjo, Gboyega A.; Mash, Bob

2014-01-01

The aim of this article is to provide practical guidance on conducting surveys and the use of questionnaires for postgraduate students at a Masters level who are undertaking primary care research. The article is intended to assist with writing the methods section of the research proposal and thinking through the relevant issues that apply to sample size calculation, sampling strategy, design of a questionnaire and administration of a questionnaire. The articleis part of a larger series on pri...

New tools for evaluating LQAS survey designs

OpenAIRE

Hund, Lauren

2014-01-01

Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are pr...

An evaluation of the quality of statistical design and analysis of published medical research: results from a systematic survey of general orthopaedic journals.

Science.gov (United States)

Parsons, Nick R; Price, Charlotte L; Hiskens, Richard; Achten, Juul; Costa, Matthew L

2012-04-25

The application of statistics in reported research in trauma and orthopaedic surgery has become ever more important and complex. Despite the extensive use of statistical analysis, it is still a subject which is often not conceptually well understood, resulting in clear methodological flaws and inadequate reporting in many papers. A detailed statistical survey sampled 100 representative orthopaedic papers using a validated questionnaire that assessed the quality of the trial design and statistical analysis methods. The survey found evidence of failings in study design, statistical methodology and presentation of the results. Overall, in 17% (95% confidence interval; 10-26%) of the studies investigated the conclusions were not clearly justified by the results, in 39% (30-49%) of studies a different analysis should have been undertaken and in 17% (10-26%) a different analysis could have made a difference to the overall conclusions. It is only by an improved dialogue between statistician, clinician, reviewer and journal editor that the failings in design methodology and analysis highlighted by this survey can be addressed.

An evaluation of the quality of statistical design and analysis of published medical research: results from a systematic survey of general orthopaedic journals

Directory of Open Access Journals (Sweden)

Parsons Nick R

2012-04-01

Full Text Available Abstract Background The application of statistics in reported research in trauma and orthopaedic surgery has become ever more important and complex. Despite the extensive use of statistical analysis, it is still a subject which is often not conceptually well understood, resulting in clear methodological flaws and inadequate reporting in many papers. Methods A detailed statistical survey sampled 100 representative orthopaedic papers using a validated questionnaire that assessed the quality of the trial design and statistical analysis methods. Results The survey found evidence of failings in study design, statistical methodology and presentation of the results. Overall, in 17% (95% confidence interval; 10–26% of the studies investigated the conclusions were not clearly justified by the results, in 39% (30–49% of studies a different analysis should have been undertaken and in 17% (10–26% a different analysis could have made a difference to the overall conclusions. Conclusion It is only by an improved dialogue between statistician, clinician, reviewer and journal editor that the failings in design methodology and analysis highlighted by this survey can be addressed.

CHAracteristics of research studies that iNfluence practice: a GEneral survey of Canadian orthopaedic Surgeons (CHANGES): a pilot survey.

Science.gov (United States)

de Sa, Darren; Thornley, Patrick; Evaniew, Nathan; Madden, Kim; Bhandari, Mohit; Ghert, Michelle

2015-01-01

Evidence Based Medicine (EBM) is increasingly being applied to inform clinical decision-making in orthopaedic surgery. Despite the promotion of EBM in Orthopaedic Surgery, the adoption of results from high quality clinical research seems highly unpredictable and does not appear to be driven strictly by randomized trial data. The objective of this study was to pilot a survey to determine if we could identify surgeon opinions on the characteristics of research studies that are perceived as being most likely to influence clinical decision-making among orthopaedic surgeons in Canada. A 28-question electronic survey was distributed to active members of the Canadian Orthopaedic Association (COA) over a period of 11 weeks. The questionnaire sought to analyze the influence of both extrinsic and intrinsic characteristics of research studies and their potential to influence practice patterns. Extrinsic factors included the perceived journal quality and investigator profiles, economic impact, peer/patient/industry influence and individual surgeon residency/fellowship training experiences. Intrinsic factors included study design, sample size, and outcomes reported. Descriptive statistics are provided. Of the 109 members of the COA who opened the survey, 95 (87%) completed the survey in its entirety. The overall response rate was 11% (95/841). Surgeons achieved consensus on the influence of three key designs on their practices: 1) randomized controlled trials 94 (99%), 2) meta-analysis 83 (87%), and 3) systematic reviews 81 (85%). Sixty-seven percent of surgeons agreed that studies with sample sizes of 101-500 or more were more likely to influence clinical practice than smaller studies (n = design influencing adoption included 1) reputation of the investigators (99%) and 2) perceived quality of the journal (75%). Although study design and sample size (i.e. minimum of 100 patients) have some influence on clinical decision making, surgeon respondents are equally influenced

Advances in mechanisms, robotics and design education and research

CERN Document Server

Schmiedeler, James; Sreenivasan, S; Su, Hai-Jun

2013-01-01

This book contains papers on a wide range of topics in the area of kinematics, mechanisms, robotics, and design, addressing new research advances and innovations in design education. The content is divided into  five main categories headed ‘Historical Perspectives’, ‘Kinematics and Mechanisms’, ‘Robotic Systems’, ‘Legged Locomotion’, and ‘Design Engineering Education’. Contributions take the form of survey articles, historical perspectives, commentaries on trends on education or research, original research contributions, and papers on design education.   This volume celebrates the achievements of Professor Kenneth Waldron who has made innumerable and invaluable contributions to these fields in the last fifty years. His leadership and his pioneering work have influenced thousands of people in this discipline.

African primary care research: performing surveys using questionnaires.

Science.gov (United States)

Govender, Indiran; Mabuza, Langalibalele H; Ogunbanjo, Gboyega A; Mash, Bob

2014-04-25

The aim of this article is to provide practical guidance on conducting surveys and the use of questionnaires for postgraduate students at a Masters level who are undertaking primary care research. The article is intended to assist with writing the methods section of the research proposal and thinking through the relevant issues that apply to sample size calculation, sampling strategy, design of a questionnaire and administration of a questionnaire. The articleis part of a larger series on primary care research, with other articles in the series focusing on the structure of the research proposal and the literature review, as well as quantitative data analysis.

Watershed-based survey designs

Science.gov (United States)

Detenbeck, N.E.; Cincotta, D.; Denver, J.M.; Greenlee, S.K.; Olsen, A.R.; Pitchford, A.M.

2005-01-01

Watershed-based sampling design and assessment tools help serve the multiple goals for water quality monitoring required under the Clean Water Act, including assessment of regional conditions to meet Section 305(b), identification of impaired water bodies or watersheds to meet Section 303(d), and development of empirical relationships between causes or sources of impairment and biological responses. Creation of GIS databases for hydrography, hydrologically corrected digital elevation models, and hydrologic derivatives such as watershed boundaries and upstream–downstream topology of subcatchments would provide a consistent seamless nationwide framework for these designs. The elements of a watershed-based sample framework can be represented either as a continuous infinite set defined by points along a linear stream network, or as a discrete set of watershed polygons. Watershed-based designs can be developed with existing probabilistic survey methods, including the use of unequal probability weighting, stratification, and two-stage frames for sampling. Case studies for monitoring of Atlantic Coastal Plain streams, West Virginia wadeable streams, and coastal Oregon streams illustrate three different approaches for selecting sites for watershed-based survey designs.

A Survey of Former Drafting & Engineering Design Technology Students. Summary Findings of Respondents District-Wide.

Science.gov (United States)

Glyer-Culver, Betty

In fall 2001 staff of the Los Rios Community College District Office of Institutional Research collaborated with occupational deans, academic deans, and faculty to develop and administer a survey of former Drafting and Engineering Design Technology students. The survey was designed to determine how well courses had met the needs of former drafting…

Internet, Phone, Mail, and Mixed-Mode Surveys: The Tailored Design Method, 4th Edition

Science.gov (United States)

Dillman, Don A.; Smyth, Jolene D.; Christian, Lean Melani

2014-01-01

For over two decades, Dillman's classic text on survey design has aided both students and professionals in effectively planning and conducting mail, telephone, and, more recently, Internet surveys. The new edition is thoroughly updated and revised, and covers all aspects of survey research. It features expanded coverage of mobile phones, tablets,…

Design Research

DEFF Research Database (Denmark)

Design Research is a new interdisciplinary research area with a social science orientation at its heart, and this book explores how scientific knowledge can be put into practice in ways that are at once ethical, creative, helpful, and extraordinary in their results. In order to clarify the common...... aspects – in terms of features and approaches – that characterize all strands of research disciplines addressing design, Design Research undertakes an in depth exploration of the social processes involved in doing design, as well as analyses of the contexts for design use. The book further elicits...... ‘synergies from interdisciplinary perspectives’ by discussing and elaborating on differing academic perspectives, theoretical backgrounds, and design concept definitions, and evaluating their unique contribution to a general core of design research. This book is an exciting contribution to this little...

Visual Design, Order Effects, and Respondent Characteristics in a Self-Administered Survey

Directory of Open Access Journals (Sweden)

Michael Stern

2007-12-01

Full Text Available Recent survey design research has shown that small changes in the structure and visual layout of questions can affect respondents' answers. While the findings have provided strong evidence of such effects, they are limited by the homogeneity of their samples, in that many of these studies have used random samples of college students. In this paper, we examine the effects of seven experimental alterations in question format and visual design using data from a general population survey that allows us to examine the effects of demographic differences among respondents. Results from a 2005 random sample mail survey of 1,315 households in a small metropolitan region of the United States suggest that the visual layout of survey questions affects different demographic groups in similar ways.

Design and validation of the Quantum Mechanics Conceptual Survey

Directory of Open Access Journals (Sweden)

S. B. McKagan

2010-11-01

Full Text Available The Quantum Mechanics Conceptual Survey (QMCS is a 12-question survey of students’ conceptual understanding of quantum mechanics. It is intended to be used to measure the relative effectiveness of different instructional methods in modern physics courses. In this paper, we describe the design and validation of the survey, a process that included observations of students, a review of previous literature and textbooks and syllabi, faculty and student interviews, and statistical analysis. We also discuss issues in the development of specific questions, which may be useful both for instructors who wish to use the QMCS in their classes and for researchers who wish to conduct further research of student understanding of quantum mechanics. The QMCS has been most thoroughly tested in, and is most appropriate for assessment of (as a posttest only, sophomore-level modern physics courses. We also describe testing with students in junior quantum courses and graduate quantum courses, from which we conclude that the QMCS may be appropriate for assessing junior quantum courses, but is not appropriate for assessing graduate courses. One surprising result of our faculty interviews is a lack of faculty consensus on what topics should be taught in modern physics, which has made designing a test that is valued by a majority of physics faculty more difficult than expected.

An exploratory survey of design science research amongst South African computing scholars

CSIR Research Space (South Africa)

Naidoo, R

2012-10-01

Full Text Available The debate ensues as to whether the traditional focus of computing research on theory development and verification and therefore has adequate immediate practical relevance. Despite increasing claims of the potential of design science research (DSR...

Leading survey and research report for fiscal 1999. Survey and research on chemical reaction simulator technology; 1999 nendo kagaku hanno simulator gijutsu no chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Although various chemical reactions are made use of at scenes of chemical industry for the acquisition of desired chemicals, the control of reaction process governing factors, such as temperature, pressure, catalysts, solutions, etc., is found to be carried out only on the empirical basis. At the present time, rational or optimum reaction designs are not to be prepared in a short period of time in the presence of the widespread shortage of knowledge about chemical reactions and of the shortage of understanding of chemical reactions at the micro level. Leading survey and research are conducted for the development of a 'chemical reaction simulator' technology to enable the acquisition of optimum reaction designing guidelines in a short period of time. Using the simulator, a chemical of his choice is inputted by a researcher engaged in the study of an real chemical reaction and then various techniques of computer science are mobilized for the preparation of a huge number of feasible reaction routes, and high-precision simulations are conducted for the feasible reaction routes. The results achieved this fiscal year are reported. The purpose of this research and its ripple effect on new product industry creation are stated. Then the positioning, mission, and concept of such a chemical reaction simulator are described. Finally, the result of research and survey of knowledge databases and the result of research and survey of computational chemistry are stated. (NEDO)

Leading survey and research report for fiscal 1999. Survey and research on chemical reaction simulator technology; 1999 nendo kagaku hanno simulator gijutsu no chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Although various chemical reactions are made use of at scenes of chemical industry for the acquisition of desired chemicals, the control of reaction process governing factors, such as temperature, pressure, catalysts, solutions, etc., is found to be carried out only on the empirical basis. At the present time, rational or optimum reaction designs are not to be prepared in a short period of time in the presence of the widespread shortage of knowledge about chemical reactions and of the shortage of understanding of chemical reactions at the micro level. Leading survey and research are conducted for the development of a 'chemical reaction simulator' technology to enable the acquisition of optimum reaction designing guidelines in a short period of time. Using the simulator, a chemical of his choice is inputted by a researcher engaged in the study of an real chemical reaction and then various techniques of computer science are mobilized for the preparation of a huge number of feasible reaction routes, and high-precision simulations are conducted for the feasible reaction routes. The results achieved this fiscal year are reported. The purpose of this research and its ripple effect on new product industry creation are stated. Then the positioning, mission, and concept of such a chemical reaction simulator are described. Finally, the result of research and survey of knowledge databases and the result of research and survey of computational chemistry are stated. (NEDO)

A survey of critical research areas in the energy segment of restructured electric power markets

International Nuclear Information System (INIS)

Nanduri, Vishnu; Das, Tapas K.

2009-01-01

Availability of a large volume of recent literature on deregulated (a.k.a. restructured) electricity markets underscores the importance of the research needs to ensure proper design and functioning of the markets. Researchers have made significant contributions fueling the evolution of the fundamental market design changes that have taken place since the beginning of the restructuring process. Due to the vast scope, existing survey papers are focused on particular facets of deregulated electricity markets. We adopt a similar approach by focusing on the most important research areas related to the energy market. The contributions of the survey paper lie in the novel approach used in classifying the literature based on critical research areas. Some areas of research such as auction based pricing, bidding strategy formulation, market equilibria, and market power are reviewed in a different light than other existing survey papers. We conclude by providing some future research directions for the energy markets. (author)

Multiagency radiation survey and site investigation manual (MARSSIM): Survey design

International Nuclear Information System (INIS)

Abelquist, E.W.; Berger, J.D.

1996-01-01

This paper describes the MultiAgency Radiation Survey and Site Investigation Manual (MARSSIM) strategy for designing a final status survey. The purpose of the final status survey is to demonstrate that release criteria established by the regulatory agency have been met. Survey design begins with identification of the contaminants and determination of whether the radionuclides of concern exist in background. The decommissioned site is segregated into Class 1, Class 2, and Class 3 areas, based on contamination potential, and each area is further divided into survey units. Appropriate reference areas for indoor and outdoor background measurements are selected. Survey instrumentation and techniques are selected in order to assure that the instrumentation is capable of detecting the contamination at the derived concentration guideline level (DCGL). Survey reference systems are established and the number of survey data points is determined-with the required number of data points distributed on a triangular grid Pattern. Two suitistical tests are used to evaluate data from final status surveys. For contaminants that are b, present in background, the Wilcoxon Rank Sum test is used; for contaminants that are not present in background, the Wilcoxon Signed Rank (or Sign) test is used. The number of data points needed to satisfy these nonparametric tests is based on the contaminant DCGL value, the expected Standard deviation of the contaminant in background and in the survey unit, and the acceptable probability of making Type I and Type II decision errors. The MARSSIM also requires a reasonable level of assurance that any small areas of elevated residual radioactivity that could be significant relative to regulatory limits are not missed during the final status survey. Measurements and sampling on a specified grid size are used to obtain an adequate assurance level that small locations of elevated radioactivity will Still satisfy DCGLs-applicable to small areas

Comparing web and mail responses in a mixed mode survey in college alcohol use research

Science.gov (United States)

McCabe, Sean Esteban; Diez, Alison; Boyd, Carol J.; Nelson, Toben F.; Weitzman, Elissa R.

2011-01-01

Objective This exploratory study examined potential mode effects (web versus U.S. mail) in a mixed mode design survey of alcohol use at eight U.S. colleges. Methods Randomly selected students from eight U.S. colleges were invited to participate in a self-administered survey on their alcohol use in the spring of 2002. Data were collected initially by web survey (n =2619) and non-responders to this mode were mailed a hardcopy survey (n =628). Results College students who were male, living on-campus and under 21 years of age were significantly more likely to complete the initial web survey. Multivariate analyses revealed few substantive differences between survey modality and alcohol use measures. Conclusions The findings from this study provide preliminary evidence that web and mail surveys produce comparable estimates of alcohol use in a non-randomized mixed mode design. The results suggest that mixed mode survey designs could be effective at reaching certain college sub-populations and improving overall response rate while maintaining valid measurement of alcohol use. Web surveys are gaining popularity in survey research and more work is needed to examine whether these results can extend to web surveys generally or are specific to mixed mode designs. PMID:16460882

The Horonobe Underground Research Laboratory (Tentative name) Project. A program on survey and research performed from earth surface

International Nuclear Information System (INIS)

2001-03-01

The Horonobe Underground Research Laboratory (Tentative name) Project under planning at Horonobe-machi by the Japan Nuclear Cycle Development Institute (JNC) is a research facility on deep underground shown in the Long-term program on research, development and application of nuclear energy (June, 1994)' (LPNE), where some researches on the deep underground targeted at sedimentary rocks are carried out. The plan on The Horonobe Underground Research Laboratory performed at Horonobe-machi' is an about 20 years plan ranging from beginning to finishing of its survey and research, which is carried out by three steps such as 'Survey and research performed from earth surface', 'Survey and research performed under excavation of road', and Survey and research performed by using the road'. The Horonobe Underground Research Laboratory is one of research facilities on deep underground shown its importance in LPNE, and carries out some researches on the deep underground at a target of the sedimentary rocks. And also The Horonobe Underground Research Laboratory confirms some technical reliability and support on stratum disposal shown in the 'Technical reliability on stratum disposal of the high level radioactive wastes. The Second Progress Report of R and D on geological disposal' summarized on November, 1999 by JNC through actual tests and researches at the deep stratum. The obtained results are intended to reflect to disposal business of The Horonobe Underground Research Laboratory and safety regulation and so on performed by the government, together with results of stratum science research, at the Tono Geoscience Center, of geological disposal R and D at the Tokai Works, or of international collaborations. For R and D at the The Horonobe Underground Research Laboratory after 2000, following subjects are shown: 1) Survey technique on long-term stability of geological environment, 2) Survey technique on geological environment, 3) Engineering technique on engineered barrier and

Research designs and making causal inferences from health care studies.

Science.gov (United States)

Flannelly, Kevin J; Jankowski, Katherine R B

2014-01-01

This article summarizes the major types of research designs used in healthcare research, including experimental, quasi-experimental, and observational studies. Observational studies are divided into survey studies (descriptive and correlational studies), case-studies and analytic studies, the last of which are commonly used in epidemiology: case-control, retrospective cohort, and prospective cohort studies. Similarities and differences among the research designs are described and the relative strength of evidence they provide is discussed. Emphasis is placed on five criteria for drawing causal inferences that are derived from the writings of the philosopher John Stuart Mill, especially his methods or canons. The application of the criteria to experimentation is explained. Particular attention is given to the degree to which different designs meet the five criteria for making causal inferences. Examples of specific studies that have used various designs in chaplaincy research are provided.

Research-based design & design-based research: Affordances, limitations and synergies

NARCIS (Netherlands)

McKenney, Susan

2015-01-01

Research-based design is an orientation to educational development that is explicitly informed by existing research as well as formative evaluation. Design-based research is a genre of inquiry in which the design of innovative solutions to problems in educational practice provides the context for

Design Research as Conceptual Designing

DEFF Research Database (Denmark)

Ylirisku, Salu; Jacucci, Giulio; Sellen, Abigail

2015-01-01

define conceptual designing as a constructive framing and re-framing activity, which is mediated by and targeted at the creation of new design concepts. Conceptual designing as an approach is valuable for addressing the fuzziness and ambiguity typical of research that explores novel areas with new...... partners, methods and resources. It is by no means a new phenomenon, and the main contribution of the article is the clarification of conceptual designing as a particular approach to designing and researching. The approach embraces openness, resource-construction and collaboration. We conclude...... that conceptual designing can be especially useful in research and design projects that bring different kinds of people, organizations, technologies and domains together into the forming of new well-founded proposals for development. The presentation of conceptual designing in this paper is written...

Robustness of Adaptive Survey Designs to Inaccuracy of Design Parameters

Directory of Open Access Journals (Sweden)

Burger Joep

2017-09-01

Full Text Available Adaptive survey designs (ASDs optimize design features, given 1 the interactions between the design features and characteristics of sampling units and 2 a set of constraints, such as a budget and a minimum number of respondents. Estimation of the interactions is subject to both random and systematic error. In this article, we propose and evaluate four viewpoints to assess robustness of ASDs to inaccuracy of design parameter estimates: the effect of both imprecision and bias on both ASD structure and ASD performance. We additionally propose three distance measures to compare the structure of ASDs. The methodology is illustrated using a simple simulation study and a more complex but realistic case study on the Dutch Travel Survey. The proposed methodology can be applied to other ASD optimization problems. In our simulation study and case study, the ASD was fairly robust to imprecision, but not to realistic dynamics in the design parameters. To deal with the sensitivity of ASDs to changing design parameters, we recommend to learn and update the design parameters.

Optical Design for a Survey X-Ray Telescope

Science.gov (United States)

Saha, Timo T.; Zhang, William W.; McClelland, Ryan S.

2014-01-01

Optical design trades are underway at the Goddard Space Flight Center to define a telescope for an x-ray survey mission. Top-level science objectives of the mission include the study of x-ray transients, surveying and long-term monitoring of compact objects in nearby galaxies, as well as both deep and wide-field x-ray surveys. In this paper we consider Wolter, Wolter-Schwarzschild, and modified Wolter-Schwarzschild telescope designs as basic building blocks for the tightly nested survey telescope. Design principles and dominating aberrations of individual telescopes and nested telescopes are discussed and we compare the off-axis optical performance at 1.0 KeV and 4.0 KeV across a 1.0-degree full field-of-view.

Sample design considerations of indoor air exposure surveys

International Nuclear Information System (INIS)

Cox, B.G.; Mage, D.T.; Immerman, F.W.

1988-01-01

Concern about the potential for indoor air pollution has prompted recent surveys of radon and NO 2 concentrations in homes and personal exposure studies of volatile organics, carbon monoxide and pesticides, to name a few. The statistical problems in designing sample surveys that measure the physical environment are diverse and more complicated than those encountered in traditional surveys of human attitudes and attributes. This paper addresses issues encountered when designing indoor air quality (IAQ) studies. General statistical concepts related to target population definition, frame creation, and sample selection for area household surveys and telephone surveys are presented. The implications of different measurement approaches are discussed, and response rate considerations are described

Reflection: Research by Design: Design-Based Research and the Higher Degree Research Student

Science.gov (United States)

Kennedy-Clark, Shannon

2015-01-01

The article "Research by design: Design-based research and the higher degree research student" (Kennedy-Clark, 2013) appeared in the "Journal of Learning Design" Volume 6, Issue 2 in 2013. Two years on, Shannon Kennedy-Clark reflects upon her original article. Upon being asked to revisit this article the author reflected upon…

Research design and statistical methods in Indian medical journals: a retrospective survey.

Science.gov (United States)

Hassan, Shabbeer; Yellur, Rajashree; Subramani, Pooventhan; Adiga, Poornima; Gokhale, Manoj; Iyer, Manasa S; Mayya, Shreemathi S

2015-01-01

Good quality medical research generally requires not only an expertise in the chosen medical field of interest but also a sound knowledge of statistical methodology. The number of medical research articles which have been published in Indian medical journals has increased quite substantially in the past decade. The aim of this study was to collate all evidence on study design quality and statistical analyses used in selected leading Indian medical journals. Ten (10) leading Indian medical journals were selected based on impact factors and all original research articles published in 2003 (N = 588) and 2013 (N = 774) were categorized and reviewed. A validated checklist on study design, statistical analyses, results presentation, and interpretation was used for review and evaluation of the articles. Main outcomes considered in the present study were - study design types and their frequencies, error/defects proportion in study design, statistical analyses, and implementation of CONSORT checklist in RCT (randomized clinical trials). From 2003 to 2013: The proportion of erroneous statistical analyses did not decrease (χ2=0.592, Φ=0.027, p=0.4418), 25% (80/320) in 2003 compared to 22.6% (111/490) in 2013. Compared with 2003, significant improvement was seen in 2013; the proportion of papers using statistical tests increased significantly (χ2=26.96, Φ=0.16, pdesign decreased significantly (χ2=16.783, Φ=0.12 pdesigns has remained very low (7.3%, 43/588) with majority showing some errors (41 papers, 95.3%). Majority of the published studies were retrospective in nature both in 2003 [79.1% (465/588)] and in 2013 [78.2% (605/774)]. Major decreases in error proportions were observed in both results presentation (χ2=24.477, Φ=0.17, presearch seems to have made no major progress regarding using correct statistical analyses, but error/defects in study designs have decreased significantly. Randomized clinical trials are quite rarely published and have high proportion of

Designing web surveys for the multi-device internet

NARCIS (Netherlands)

de Bruijne, M.A.

2015-01-01

The rise of the mobile internet has rapidly changed the landscape for fielding web surveys. The devices that respondents use to take a web survey vary greatly in size and user interface. This diversity in the interaction between survey and respondent makes it challenging to design a web survey for

Marketing Research Using Online Surveys

Directory of Open Access Journals (Sweden)

Landoy A.

2009-12-01

Full Text Available In this article, quality criteria for electronic survey design and use based on an investigation of recent electronic survey literature are presented. The results show that a hard-to-reach audience can be reached using the quality criteria that are most important for reaching these types of audiences. It is presented one online questionnaire for the academic staff community at Transilvania university of Brasov, Romania. The Limerik one was tested.

Workshop Synthesis: Stated Preference Surveys and Experimental Design, an Audit of the Journey so far and Future Research Perspectives

DEFF Research Database (Denmark)

Cherchi, Elisabetta; Hensher, David A.

2015-01-01

This paper is a synthesis of the discussions and ideas that were generated during the workshop on “Stated preference surveys and experimental design” at the 2014 Travel Survey Methods Conference in Leura (Australia). The workshop addressed the challenges related to the design and implementation o...

Sample design for the residential energy consumption survey

Energy Technology Data Exchange (ETDEWEB)

1994-08-01

The purpose of this report is to provide detailed information about the multistage area-probability sample design used for the Residential Energy Consumption Survey (RECS). It is intended as a technical report, for use by statisticians, to better understand the theory and procedures followed in the creation of the RECS sample frame. For a more cursory overview of the RECS sample design, refer to the appendix entitled ``How the Survey was Conducted,`` which is included in the statistical reports produced for each RECS survey year.

Survey of basic medical researchers on the awareness of animal experimental designs and reporting standards in China.

Directory of Open Access Journals (Sweden)

Bin Ma

Full Text Available To investigate the awareness and use of the Systematic Review Center for Laboratory Animal Experimentation's (SYRCLE risk-of-bias tool, the Animal Research: Reporting of In Vivo Experiments (ARRIVE reporting guidelines, and Gold Standard Publication Checklist (GSPC in China in basic medical researchers of animal experimental studies.A national questionnaire-based survey targeting basic medical researchers was carried in China to investigate the basic information and awareness of SYRCLE's risk of bias tool, ARRIVE guidelines, GSPC, and animal experimental bias risk control factors. The EpiData3.1 software was used for data entry, and Microsoft Excel 2013 was used for statistical analysis in this study. The number of cases (n and percentage (% of classified information were statistically described, and the comparison between groups (i.e., current students vs. research staff was performed using chi-square test.A total of 298 questionnaires were distributed, and 272 responses were received, which included 266 valid questionnaires (from 118 current students and 148 research staff. Among the 266 survey participants, only 15.8% was aware of the SYRCLE's risk of bias tool, with significant difference between the two groups (P = 0.003, and the awareness rates of ARRIVE guidelines and GSPC were only 9.4% and 9.0%, respectively; 58.6% survey participants believed that the reports of animal experimental studies in Chinese literature were inadequate, with significant difference between the two groups (P = 0.004. In addition, only approximately 1/3 of the survey participants had read systematic reviews and meta-analysis reports of animal experimental studies; only 16/266 (6.0% had carried out/participated in and 11/266 (4.1% had published systematic reviews/meta-analysis of animal experimental studies.The awareness and use rates of SYRCLE's risk-of-bias tool, the ARRIVE guidelines, and the GSPC were low among Chinese basic medical researchers. Therefore

Survey of customer expectation and satisfaction: preliminary research of a modular product design approach for sheep cage design

Directory of Open Access Journals (Sweden)

Rochman Yuli Agusti

2018-01-01

Full Text Available This study aims to produce a modular sheep cage design. Feeding, maintenance and integrated waste management are taking into account in the design. The modular and integrated product design provides advantages such as (1 easy way of making and modifying the product, (2 enabling the utilization of existing facilities such as shade, (3 giving the user a sense of convenience as the waste can be processed and not being a source of pollution. The Modular Quality Function Deployment (QFD method is applied to identify modules associated with the customer needs of the product. A survey about customer expectation and satisfaction was conducted in order to evaluate the gap of both. The highest value of gap between customer expectation and satisfaction of products indicates that the customer needs are the focus of the problems. The most important customer needs are considered in modification and improvement of design. These are (1 the cage is not easy to fall down, (2 the sheep cage can last for long time, (3 it uses a strong frame, (4 the roof section materials is not easy to leak, and (5 It can be used even if one part of the cage is damaged.

Operations Research Games : A Survey

NARCIS (Netherlands)

Borm, P.E.M.; Hamers, H.J.M.; Hendrickx, R.L.P.

2001-01-01

This paper surveys the research area of cooperative games associated with several types of operations research problems in which various decision makers (players) are involved.Cooperating players not only face a joint optimisation problem in trying, e.g., to minimise total joint costs, but also face

Against (Design Research

Directory of Open Access Journals (Sweden)

Ferdinand Indrajaya

2011-10-01

Full Text Available The content of this article is an attempt to show that the word research in traditional sense (within the Cartesian scheme is hostile to design activity. It will reduce the process of design into a merely fix mechanical process, burying the aspect of imagination, creativity, and more importantly proposing in it that is a crucial aspect to design. This imposition might indiscipline (in a formal academic sense design as a discipline in human sciences. In order to achieve this, the article is divided in three sections. The first section will discuss what scientific research is and what traditionally presupposed in it: objective, neutral, and a-historical; simply the disinterestedness of research. As for the second, epistemological concerns on traditional scientific research from two philosophers of science will be discussed: Thomas S. Kuhn and Paul K. Feyerabend. As for the third, the closing section, an attempt to delineate design and what designers do in comparison to scientists’ will be discussed. It is how design and designers are different in their manners with traditional science and scientist. 

Tackling the Survey: A Learning-by-Induction Design

Science.gov (United States)

Witte, Anne E.

2017-01-01

Free online survey tools provide a practical learning-by-induction platform for business communication instructors interested in trying out an advanced multidisciplinary survey activity coupled with an innovative teaching design. More than just building skills in marketing, survey projects marshal a wider set of thinking and doing activities that…

Research by Design - a Research and Teaching Concept

DEFF Research Database (Denmark)

Hauberg, Jørgen; Tamke, Martin; Ramsgaard Thomsen, Mette

2012-01-01

Abstract. Interweaving research and design-based architectural education is an important effort in most architect schools. All good design is informed by some kind of research – research-based design. And all architect schools involve research in their teaching – research based education. Research...... by design. The paper asks how “the new” in architectural production emerges and aims to find similarities between the tradition of practice based proposals and theorisation, and our own research and teaching practice. Grounded in this practice the paper investigates how research by design contributes...... to the construction of knowledge and student’s learning outcomes through research led workshops. The paper presents research inquiries, results and methodologies of two parallel research workshops and discusses the format by which this research tool is developed. Keywords: Research by Design, practice-based research...

Towards programmatic design research

Directory of Open Access Journals (Sweden)

Jonas Löwgren

2013-12-01

Full Text Available The notion of design research entails research where design practice forms part of the knowledge production. Based on our characterization of the nature of design, we propose to conceptualize this kind of research as programmatic design research. Two ongoing PhD projects in interaction design are presented as examples of programmatic research processes, highlighting issues to do with the virtues and qualities of the processes, the interplay of optics and engagements in a hermeneutical dynamic, and the production of takeaways for the academic community.

Variation in choice of study design: findings from the Epidemiology Design Decision Inventory and Evaluation (EDDIE) survey.

Science.gov (United States)

Stang, Paul E; Ryan, Patrick B; Overhage, J Marc; Schuemie, Martijn J; Hartzema, Abraham G; Welebob, Emily

2013-10-01

Researchers using observational data to understand drug effects must make a number of analytic design choices that suit the characteristics of the data and the subject of the study. Review of the published literature suggests that there is a lack of consistency even when addressing the same research question in the same database. To characterize the degree of similarity or difference in the method and analysis choices made by observational database research experts when presented with research study scenarios. On-line survey using research scenarios on drug-effect studies to capture method selection and analysis choices that follow a dependency branching based on response to key questions. Voluntary participants experienced in epidemiological study design solicited for participation through registration on the Observational Medical Outcomes Partnership website, membership in particular professional organizations, or links in relevant newsletters. Description (proportion) of respondents selecting particular methods and making specific analysis choices based on individual drug-outcome scenario pairs. The number of questions/decisions differed based on stem questions of study design, time-at-risk, outcome definition, and comparator. There is little consistency across scenarios, by drug or by outcome of interest, in the decisions made for design and analyses in scenarios using large healthcare databases. The most consistent choice was the cohort study design but variability in the other critical decisions was common. There is great variation among epidemiologists in the design and analytical choices that they make when implementing analyses in observational healthcare databases. These findings confirm that it will be important to generate empiric evidence to inform these decisions and to promote a better understanding of the impact of standardization on research implementation.

Research by Design: Design-Based Research and the Higher Degree Research student

Science.gov (United States)

Kennedy-Clark, Shannon

2013-01-01

Design-based research lends itself to educational research as the aim of this approach is to develop and refine the design of artefacts, tools and curriculum and to advance existing theory or develop new theories that can support and lead to a deepened understanding of learning. This paper provides an overview of the potential benefits of using a…

Dimensions of design space: a decision-theoretic approach to optimal research design.

Science.gov (United States)

Conti, Stefano; Claxton, Karl

2009-01-01

Bayesian decision theory can be used not only to establish the optimal sample size and its allocation in a single clinical study but also to identify an optimal portfolio of research combining different types of study design. Within a single study, the highest societal payoff to proposed research is achieved when its sample sizes and allocation between available treatment options are chosen to maximize the expected net benefit of sampling (ENBS). Where a number of different types of study informing different parameters in the decision problem could be conducted, the simultaneous estimation of ENBS across all dimensions of the design space is required to identify the optimal sample sizes and allocations within such a research portfolio. This is illustrated through a simple example of a decision model of zanamivir for the treatment of influenza. The possible study designs include: 1) a single trial of all the parameters, 2) a clinical trial providing evidence only on clinical endpoints, 3) an epidemiological study of natural history of disease, and 4) a survey of quality of life. The possible combinations, samples sizes, and allocation between trial arms are evaluated over a range of cost-effectiveness thresholds. The computational challenges are addressed by implementing optimization algorithms to search the ENBS surface more efficiently over such large dimensions.

Research Designs and Special Education Research: Different Designs Address Different Questions

Science.gov (United States)

Cook, Bryan G.; Cook, Lysandra

2016-01-01

The aim of this article is to provide practitioners and other nonresearchers a basic understanding of research designs to aid in appropriately interpreting and applying research findings in special education. Research design provides the blueprint for conducting a research study and shapes what kind of knowledge is generated by the study. We…

2007 Veterans Employability Research Survey

Data.gov (United States)

Department of Veterans Affairs — The 2007 Veterans Employability Research Survey (VERS) was conducted to determine the factors that impact veterans' employability resulting from participation in the...

[Design and implementation of data checking system for Chinese materia medica resources survey].

Science.gov (United States)

Wang, Hui; Zhang, Xiao-Bo; Ge, Xiao-Guang; Jin, Yan; Jing, Zhi-Xian; Qi, Yuan-Hua; Wang, Ling; Zhao, Yu-Ping; Wang, Wei; Guo, Lan-Ping; Huang, Lu-Qi

2017-11-01

The Chinese material medica resources (CMMR) national survey information management system has collected a large amount of data. To help dealing with data recheck, reduce the work of inside, improve the recheck of survey data from provincial and county level, National Resource Center for Chinese Materia Medical has designed a data checking system for Chinese material medica resources survey based on J2EE technology, Java language, Oracle data base in accordance with the SOA framework. It includes single data check, check score, content manage, check the survey data census data with manual checking and automatic checking about census implementation plan, key research information, general survey information, cultivation of medicinal materials information, germplasm resources information the medicine information, market research information, traditional knowledge information, specimen information of this 9 aspects 20 class 175 indicators in two aspects of the quantity and quality. The established system assists in the completion of the data consistency and accuracy, pushes the county survey team timely to complete the data entry arrangement work, so as to improve the integrity, consistency and accuracy of the survey data, and ensure effective and available data, which lay a foundation for providing accurate data support for national survey of the Chinese material medica resources (CMMR) results summary, and displaying results and sharing. Copyright© by the Chinese Pharmaceutical Association.

Design (research) practice

DEFF Research Database (Denmark)

Binder, Thomas; Brandt, Eva

2017-01-01

possibilities through experimentation (Brandt and Binder 2007). Likewise in relation to design research we have argued that “the possible is always contingent and though research may convincingly provide arguments for certain possibilities both search and arguments have to be guided by programs that set...... substantiate or challenge this view and the dialectic between program and probing is in our view central to any design practice” (Binder and Redström 2006: 4). Our suggestion is to see design research practices as fundamentally homologous to any other design practices both in terms of the way they are driven...

Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys.

Directory of Open Access Journals (Sweden)

Lauren Hund

Full Text Available Lot quality assurance sampling (LQAS surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we compare these latter cluster LQAS methodologies and provide recommendations for choosing a cluster LQAS design. We compare technical differences in the three methods and determine situations in which the choice of method results in a substantively different design. We consider two different aspects of the methods: the distributional assumptions and the clustering parameterization. Further, we provide software tools for implementing each method and clarify misconceptions about these designs in the literature. We illustrate the differences in these methods using vaccination and nutrition cluster LQAS surveys as example designs. The cluster methods are not sensitive to the distributional assumptions but can result in substantially different designs (sample sizes depending on the clustering parameterization. However, none of the clustering parameterizations used in the existing methods appears to be consistent with the observed data, and, consequently, choice between the cluster LQAS methods is not straightforward. Further research should attempt to characterize clustering patterns in specific applications and provide suggestions for best-practice cluster LQAS designs on a setting-specific basis.

Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys.

Science.gov (United States)

Hund, Lauren; Bedrick, Edward J; Pagano, Marcello

2015-01-01

Lot quality assurance sampling (LQAS) surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we compare these latter cluster LQAS methodologies and provide recommendations for choosing a cluster LQAS design. We compare technical differences in the three methods and determine situations in which the choice of method results in a substantively different design. We consider two different aspects of the methods: the distributional assumptions and the clustering parameterization. Further, we provide software tools for implementing each method and clarify misconceptions about these designs in the literature. We illustrate the differences in these methods using vaccination and nutrition cluster LQAS surveys as example designs. The cluster methods are not sensitive to the distributional assumptions but can result in substantially different designs (sample sizes) depending on the clustering parameterization. However, none of the clustering parameterizations used in the existing methods appears to be consistent with the observed data, and, consequently, choice between the cluster LQAS methods is not straightforward. Further research should attempt to characterize clustering patterns in specific applications and provide suggestions for best-practice cluster LQAS designs on a setting-specific basis.

Methodological Issues in Survey Research: A Historical Review

NARCIS (Netherlands)

de Heer, W.; de Leeuw, E.D.; van der Zouwen, J.

1999-01-01

In this paper, we present a historical overview of social surveys and describe the historical development of scientific survey methodology and survey statistics. The origins of survey research can be traced back to the early 19th century and the first scientiflc survey was conducted in England in

Design Process-System and Methodology of Design Research

Science.gov (United States)

Bashier, Fathi

2017-10-01

Studies have recognized the failure of the traditional design approach both in practice and in the studio. They showed that design problems today are too complex for the traditional approach to cope with and reflected a new interest in a better quality design services in order to meet the challenges of our time. In the mid-1970s and early 1980s, there has been a significant shift in focus within the field of design research towards the aim of creating a ‘design discipline’. The problem, as will be discussed, is the lack of an integrated theory of design knowledge that can explicitly describe the design process in a coherent way. As a consequence, the traditional approach fails to operate systematically, in a disciplinary manner. Addressing this problem is the primary goal of the research study in the design process currently being conducted in the research-based master studio at Wollega University, Ethiopia. The research study seeks to make a contribution towards a disciplinary approach, through proper understanding the mechanism of knowledge development within design process systems. This is the task of the ‘theory of design knowledge’. In this article the research project is introduced, and a model of the design process-system is developed in the studio as a research plan and a tool of design research at the same time. Based on data drawn from students’ research projects, the theory of design knowledge is developed and empirically verified through the research project.

Music therapists' research activity and utilization barriers: a survey of the membership.

Science.gov (United States)

Waldon, Eric G

2015-01-01

Music therapists have access to a rapidly expanding body of research supporting the use of music-based interventions. What is not known is the extent to which music therapists access these resources and what factors may prevent them from incorporating research findings into clinical work. After constructing the Music Therapists' Research Activity and Utilization Barrier (MTRAUB) database, the purposes of this study involved: assessing the extent to which American Music Therapy Association (AMTA) members engage in certain research-related activities; and identifying respondents' perceived barriers to integrating research into clinical practice. This study employed a quantitative, non-experimental approach using an online survey. Respondents included professional, associate, student/graduate student, retired, inactive, and honorary life members of AMTA. Instrumentation involved a researcher-designed Background Questionnaire as well as the Barriers to Research Utilization Scale (BARRIERS; Funk, Champagne, Wiese, & Tornquist, 1991), a tool designed to assess perceived barriers to incorporating research into practice. Of the 3,194 survey invitations distributed, 974 AMTA members replied (a response rate of 30%). Regarding research-related activities, descriptive findings indicate that journal reading is the most frequently reported research-related activity while conducting research is the least frequently reported activity. Results from the BARRIERS Scale indicated that Organizational and Communication factors are perceived as interfering most prominently with the ability to utilize research in clinical practice. Findings suggest that research-related activity and perceived barriers vary as a function of educational attainment, work setting, and occupational role. The author discusses these differential findings in detail, suggests supportive mechanisms to encourage increased research activity and utilization, and offers recommendations for further analysis of the

Experimental Design Research

DEFF Research Database (Denmark)

This book presents a new, multidisciplinary perspective on and paradigm for integrative experimental design research. It addresses various perspectives on methods, analysis and overall research approach, and how they can be synthesized to advance understanding of design. It explores the foundations...... of experimental approaches and their utility in this domain, and brings together analytical approaches to promote an integrated understanding. The book also investigates where these approaches lead to and how they link design research more fully with other disciplines (e.g. psychology, cognition, sociology......, computer science, management). Above all, the book emphasizes the integrative nature of design research in terms of the methods, theories, and units of study—from the individual to the organizational level. Although this approach offers many advantages, it has inherently led to a situation in current...

Leading survey and research report for fiscal 1999. Survey and research on supercompiler technology; 1999 nendo supercompiler technology no chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Survey and research are conducted into the global computing technology and the next-generation parallel computer for their compiler technology and programming environment-related technology, which is for the preparation of basic key technologies for the embodiment of high-performance computing for the next generation, and efforts are exerted to extract and define technological problems and to deliberate a research system to achieve the goal. This fiscal year's achievements are mentioned below. Two territories were provided to be respectively covered by a Parallel Compiler Working Group and a Global Computing Working Group whose activities centered about overseas surveys and short-term reception of researchers from abroad. The Parallel Compiler Working Group was engaged in (1) the technological survey of the latest parallel compiler technology and, in its effort to execute researches under the project, in (2) the materialization of the contents of technology research and development and in (3) the materialization of a technology research and development system. The Global Computing Working Group was engaged in (1) the technological survey of the latest high-performance global computing and in (2) the survey of fields to accept global computing application. (NEDO)

Leading survey and research report for fiscal 1999. Survey and research on supercompiler technology; 1999 nendo supercompiler technology no chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Survey and research are conducted into the global computing technology and the next-generation parallel computer for their compiler technology and programming environment-related technology, which is for the preparation of basic key technologies for the embodiment of high-performance computing for the next generation, and efforts are exerted to extract and define technological problems and to deliberate a research system to achieve the goal. This fiscal year's achievements are mentioned below. Two territories were provided to be respectively covered by a Parallel Compiler Working Group and a Global Computing Working Group whose activities centered about overseas surveys and short-term reception of researchers from abroad. The Parallel Compiler Working Group was engaged in (1) the technological survey of the latest parallel compiler technology and, in its effort to execute researches under the project, in (2) the materialization of the contents of technology research and development and in (3) the materialization of a technology research and development system. The Global Computing Working Group was engaged in (1) the technological survey of the latest high-performance global computing and in (2) the survey of fields to accept global computing application. (NEDO)

A Review of Research Methods in Children's Technology Design

DEFF Research Database (Denmark)

Jensen, Janne Jul; Skov, Mikael B.

2005-01-01

Research methods have been objects of discussions for dec-ades and defining research methods is still a quite substan-tial challenge. However, it is important to understand how research methods have been adapted in different disciplines as it potentially informs us on future directions and influ......-ences on the discipline. Inspired by previous studies from other disciplines, we conduct a survey of research methods in paper publications. 105 papers on children's technology design are classified on a two-dimensional matrix on research method and pur-pose. Our results show a strong focus on engineering of products...... as applied research and on evaluation of devel-oped products in the field or in the lab. Also, we find that much research is conducted in natural setting environments with strong focus on field studies....

Design-Based Research

DEFF Research Database (Denmark)

Gynther, Karsten; Christensen, Ove; Petersen, Trine Brun

2012-01-01

I denne artikel introduceres Design Based Research for første gang på dansk i et videnskabeligt tidsskrift. Artiklen præsenterer de grundlæggende antagelser, som ligger til grund for Design Based Research-traditionen, og artiklen diskuterer de principper, som ligger til grund for gennemførelse af...... et DBR-forskningsprojekt. Med udgangspunkt i forsknings- og udviklingsprojektet ELYK: E-læring, Yderområder og Klyngedannelse, præsenteres den innovationsmodel, som projektet har udviklet med udgangspunkt i Design Based Research traditionen. ELYKs DBR innovationsmodel har vist sig effektiv i forhold...

Teaching engineering design research

DEFF Research Database (Denmark)

Blessing, Lucienne; Andreasen, Mogens Myrup

2005-01-01

The importance og engineering design as an industrial activity, and the increasingly complex and dynamic context in which it takes place, has led to the wish to improve the effectiveness and efficiency of engineering design in practice as well as in education. Although attempts have been made...... to improve design for centuries, it was not until well in the second half of the 20th century that engineering design became a research topic (see pahl and Beitz (1996), Heymann (2004) for historical overviews). Engineering research, such as research into thermodynamics, mechanics and materials, has a much...... by PhD students. This has created the demand for a clear, efficient way of learning the crafmanship of doing design research, a demand which is in strong contrast to the state of design research in general. This article reflects the authors' efforts in running a summer school om engineering design...

A critical review on the reporting of surveys in transdisciplinary research: A case study in Information Systems

Directory of Open Access Journals (Sweden)

Judy van Biljon

2011-12-01

Full Text Available Variability of goals and evolving research methodologies are fundamental characteristics of transdisciplinary research. This integration of research strategies from different fields complicates the evaluation of transdisciplinary research since the variability of goals drives variability of criteria and quality indicators. The aim of this research is to investigate the implications of using research methods across disciplinary boundaries by drilling down into the use of one research strategy in one research context (Information Systems and a related sub-context (Human-Computer Interaction. Surveys with questionnaires as data-capturing tools were selected as an established research method which is widely used in transdisciplinary research. Questionnaires are one of the most established data capturing tools and yet the validity of questionnaire-based findings have often been questioned. The main problem areas have been identified as the sampling of the data, the questionnaire design and the interpretation of the results. This paper looks into questionnaire reporting practices - an essential determinant in the validity and reliability of survey-based research. The field of Information Systems and Human- Computer Interaction has been chosen as the research context. Information Systems research is by nature interdisciplinary in focusing on social and organisational issues regarding the development and use of software in organisations. Human-Computer Interaction studies address the challenges of making computers and computations useful, usable, and universally accessible to humans. Both Information Systems and Human- Computer Interaction studies address complex, heterogeneous, real-world problems, thereby meeting the first criteria to be classified as transdisciplinary research. The research design entails document analysis of papers presented at conferences in Computer Science and Information Systems over a three-year period to identify trends in the

Synthesizing Knowledge in Design Research

DEFF Research Database (Denmark)

Piirainen, Kalle A.

2016-01-01

The chapter discusses knowledge synthesis in design research, bringing together the perspectives of experimental design research, or Research in Design Context that is treated extensively elsewhere in this book, and Design Inclusive Research as well as Practice-based Design Research. Specific...... attention is paid to the question of how practice-based or problem-driven design research processes can be rigorous and yield contributions to knowledge. The main argument in this chapter is that a key to knowledge synthesis and scientific contribution is setting explicit design propositions...... that are instantiated within design artefacts, and evaluated rigorously. The chapter starts with a discussion of knowledge creation and synthesis within design research.Following this, the chapter moves on to focus on setting a methodological framework for deriving design propositions. Lastly the chapter elaborates...

Reflecting Contemporary Design Research

DEFF Research Database (Denmark)

Engholm, Ida

2017-01-01

In recent years, design research has been the object of growing attention in universities and academies throughout the world. The present paper addresses the heterogeneous character of design research and the current need for reflection on the various approaches and interests. For this purpose......, the paper follows two steps. First, it proposes a categorization of the field in the form of a position model. The paper’s underlying assumption is that design research as a discipline exists in many different forms that cannot necessarily be brought together under one common academic research tradition......; instead it is necessary to attempt to define the field in order to initiate discussions about what constitutes the various research bases for design. Second, the paper discusses the implication for future design research when it is an interdisciplinary field that involves many disciplines, mindsets...

Who sends the email? Using electronic surveys in violence research.

Science.gov (United States)

Sutherland, Melissa A; Amar, Angela F; Laughon, Kathryn

2013-08-01

Students aged 16-24 years are at greatest risk for interpersonal violence and the resulting short and long-term health consequences. Electronic survey methodology is well suited for research related to interpersonal violence. Yet methodological questions remain about best practices in using electronic surveys. While researchers often indicate that potential participants receive multiple emails as reminders to complete the survey, little mention is made of the sender of the recruitment email. The purpose of this analysis is to describe the response rates from three violence-focused research studies when the recruitment emails are sent from a campus office, researcher or survey sampling firm. Three violence-focused studies were conducted about interpersonal violence among college students in the United States. Seven universities and a survey sampling firm were used to recruit potential participants to complete an electronic survey. The sender of the recruitment emails varied within and across the each of the studies depending on institutional review boards and university protocols. An overall response rate of 30% was noted for the 3 studies. Universities in which researcher-initiated recruitment emails were used had higher response rates compared to universities where campus officials sent the recruitment emails. Researchers found lower response rates to electronic surveys at Historically Black Colleges or Universities and that other methods were needed to improve response rates. The sender of recruitment emails for electronic surveys may be an important factor in response rates for violence-focused research. For researchers identification of best practices for survey methodology is needed to promote accurate disclosure and increase response rates.

Reflections on Design-Based Research

DEFF Research Database (Denmark)

Ørngreen, Rikke

2015-01-01

Design-Based Research is an intervention method that researches educational design (products or processes) in real-life settings with the dual purpose of generating theories about the domain and develop the design iteratively. This paper is an integrative review with a personal ethnographic...... narrative that draws on Design-Based Research literature, and identifies and discusses elements from Interaction Design and Action Research that the Design-Based Research approach could apply, situating the research in online educational projects, where participants are distributed in time and space...

Recommended survey designs for occupancy modelling using motion-activated cameras: insights from empirical wildlife data

Directory of Open Access Journals (Sweden)

Graeme Shannon

2014-08-01

Full Text Available Motion-activated cameras are a versatile tool that wildlife biologists can use for sampling wild animal populations to estimate species occurrence. Occupancy modelling provides a flexible framework for the analysis of these data; explicitly recognizing that given a species occupies an area the probability of detecting it is often less than one. Despite the number of studies using camera data in an occupancy framework, there is only limited guidance from the scientific literature about survey design trade-offs when using motion-activated cameras. A fuller understanding of these trade-offs will allow researchers to maximise available resources and determine whether the objectives of a monitoring program or research study are achievable. We use an empirical dataset collected from 40 cameras deployed across 160 km2 of the Western Slope of Colorado, USA to explore how survey effort (number of cameras deployed and the length of sampling period affects the accuracy and precision (i.e., error of the occupancy estimate for ten mammal and three virtual species. We do this using a simulation approach where species occupancy and detection parameters were informed by empirical data from motion-activated cameras. A total of 54 survey designs were considered by varying combinations of sites (10–120 cameras and occasions (20–120 survey days. Our findings demonstrate that increasing total sampling effort generally decreases error associated with the occupancy estimate, but changing the number of sites or sampling duration can have very different results, depending on whether a species is spatially common or rare (occupancy = ψ and easy or hard to detect when available (detection probability = p. For rare species with a low probability of detection (i.e., raccoon and spotted skunk the required survey effort includes maximizing the number of sites and the number of survey days, often to a level that may be logistically unrealistic for many studies. For common

An international survey to identify the intrinsic and extrinsic factors of research studies most likely to change orthopaedic practice.

Science.gov (United States)

Thornley, P; de Sa, D; Evaniew, N; Farrokhyar, F; Bhandari, M; Ghert, M

2016-04-01

Evidence -based medicine (EBM) is designed to inform clinical decision-making within all medical specialties, including orthopaedic surgery. We recently published a pilot survey of the Canadian Orthopaedic Association (COA) membership and demonstrated that the adoption of EBM principles is variable among Canadian orthopaedic surgeons. The objective of this study was to conduct a broader international survey of orthopaedic surgeons to identify characteristics of research studies perceived as being most influential in informing clinical decision-making. A 29-question electronic survey was distributed to the readership of an established orthopaedic journal with international readership. The survey aimed to analyse the influence of both extrinsic (journal quality, investigator profiles, etc.) and intrinsic characteristics (study design, sample size, etc.) of research studies in relation to their influence on practice patterns. A total of 353 surgeons completed the survey. Surgeons achieved consensus on the 'importance' of three key designs on their practices: randomised controlled trials (94%), meta-analyses (75%) and systematic reviews (66%). The vast majority of respondents support the use of current evidence over historical clinical training; however subjective factors such as journal reputation (72%) and investigator profile (68%) continue to influence clinical decision-making strongly. Although intrinsic factors such as study design and sample size have some influence on clinical decision-making, surgeon respondents are equally influenced by extrinsic factors such as investigator reputation and perceived journal quality.Cite this article: Dr M. Ghert. An international survey to identify the intrinsic and extrinsic factors of research studies most likely to change orthopaedic practice. Bone Joint Res 2016;5:130-136. DOI: 10.1302/2046-3758.54.2000578. © 2016 Ghert et al.

Empirical research through design

NARCIS (Netherlands)

Keyson, D.V.; Bruns, M.

2009-01-01

This paper describes the empirical research through design method (ERDM), which differs from current approaches to research through design by enforcing the need for the designer, after a series of pilot prototype based studies, to a-priori develop a number of testable interaction design hypothesis

Design and Calibration of a Flowfield Survey Rake for Inlet Flight Research

Science.gov (United States)

Flynn, Darin C.; Ratnayake, Nalin A.; Frederick, Michael

2009-01-01

Flowfield rake was designed to quantify the flowfield for inlet research underneath NASA DFRC s F-15B airplane. Detailed loads and stress analysis performed using CFD and empirical methods to assure structural integrity. Calibration data were generated through wind tunnel testing of the rake. Calibration algorithm was developed to determine the local Mach and flow angularity at each probe. RAGE was flown November, 2008. Data is currently being analyzed.

Who Sends the Email? Using Electronic Surveys in Violence Research

Directory of Open Access Journals (Sweden)

Melissa A Sutherland

2013-08-01

Full Text Available Introduction: Students aged 16–24 years are at greatest risk for interpersonal violence and the resulting short and long-term health consequences. Electronic survey methodology is well suited for research related to interpersonal violence. Yet methodological questions remain about best practices in using electronic surveys. While researchers often indicate that potential participants receive multiple emails as reminders to complete the survey, little mention is made of the sender of the recruitment email. The purpose of this analysis is to describe the response rates from three violence-focused research studies when the recruitment emails are sent from a campus office, researcher or survey sampling firm. Methods: Three violence-focused studies were conducted about interpersonal violence among college students in the United States. Seven universities and a survey sampling firm were used to recruit potential participants to complete an electronic survey. The sender of the recruitment emails varied within and across the each of the studies depending on institutional review boards and university protocols.Results: An overall response rate of 30% was noted for the 3 studies. Universities in which researcher initiated recruitment emails were used had higher response rates compared to universities where campus officials sent the recruitment emails. Researchers found lower response rates to electronic surveys at Historically Black Colleges or Universities and that other methods were needed to improve response rates.Conclusion: The sender of recruitment emails for electronic surveys may be an important factor in response rates for violence-focused research. For researchers identification of best practices for survey methodology is needed to promote accurate disclosure and increase response rates. [West J Emerg Med. 2013;14(4:363–369.

Descriptive survey of the contextual support for nursing research in 15 countries.

Science.gov (United States)

Uys, Leana R; Newhouse, Robin P; Oweis, Arwa; Liang, Xiaokun

2013-01-01

Global research productivity depends on the presence of contextual factors, such as a doctorally prepared faculty, graduate programmes, publication options, that enable the conduct and publication of studies to generate knowledge to inform nursing practice. The current study aimed to develop and test an instrument that measures the level of contextual support for nursing research within a specific country, allowing comparisons between countries. After development of a 20-item survey with seven factors and 11 criteria based on a literature review, a quantitative descriptive e-mail survey design was used. Nurse researchers (N=100) from 22 countries were invited to participate. The response rate was 39% from 15 countries. Ethics approval was obtained by investigators in their country of origin. Results showed wide variation in the level of contextual support. The average total level of support across all countries was 26.8% (standard deviation [SD]=14.97). The greatest variability was in the area of availability of publishing opportunities (ranging between no suitable journals in a country to over 100). The least variability was in the area of availability of local enabling support (SD=7.22). This research showed wide differences in the level of contextual support for nursing research. The survey instrument can be utilised as a country assessment that can be used to strategically plan the building of infrastructure needed to support nursing research. Contextual support for nursing research is an antecedent of strong science. Building infrastructure for nursing science is a priority for global health.

Report on a survey in fiscal 1999. Survey on research exchange possibility; 1999 nendo kenkyu koryu kanosei chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This survey deals with research institutions of governmental organizations, universities, and business entities for the purpose of discussing the possibility of research exchange standing on a long-term point of view to serve for solving global environment problems, and the way the exchange should be. The research exchange shall cover the areas of trends in research and development of global environment related technologies, themes for the research and development, institutions for the research and development, and exchange of researchers and information with these research organizations. In fiscal 1999, three survey missions were dispatched to cover the following three areas: (1) surveys on research possibility of catalyst development by means of combinatorial chemistry, (2) surveys on research exchange possibility for thermo-chemical solar hybrid fuel production technologies, and (3) surveys on research exchange possibility for structuring function improving technologies of the 21st century type. Each survey mission has visited research institutions of the world to survey the trends in researches related to global environment, and the possibility of exchanging researches with RITE. The visits presented the following conclusions and findings: (1) the research on the combinatorial chemistry in the U.S.A. is still in the initial stage; (2) important findings were obtained when surveys were made on methane reformation utilizing solar heat, and coal gasification technologies in Europe; and (3) surveys were made on pioneering researches on plant molecule physiology in Europe. (NEDO)

Evaluation of Nine Consensus Indices in Delphi Foresight Research and Their Dependency on Delphi Survey Characteristics: A Simulation Study and Debate on Delphi Design and Interpretation.

Science.gov (United States)

Birko, Stanislav; Dove, Edward S; Özdemir, Vural

2015-01-01

The extent of consensus (or the lack thereof) among experts in emerging fields of innovation can serve as antecedents of scientific, societal, investor and stakeholder synergy or conflict. Naturally, how we measure consensus is of great importance to science and technology strategic foresight. The Delphi methodology is a widely used anonymous survey technique to evaluate consensus among a panel of experts. Surprisingly, there is little guidance on how indices of consensus can be influenced by parameters of the Delphi survey itself. We simulated a classic three-round Delphi survey building on the concept of clustered consensus/dissensus. We evaluated three study characteristics that are pertinent for design of Delphi foresight research: (1) the number of survey questions, (2) the sample size, and (3) the extent to which experts conform to group opinion (the Group Conformity Index) in a Delphi study. Their impacts on the following nine Delphi consensus indices were then examined in 1000 simulations: Clustered Mode, Clustered Pairwise Agreement, Conger's Kappa, De Moivre index, Extremities Version of the Clustered Pairwise Agreement, Fleiss' Kappa, Mode, the Interquartile Range and Pairwise Agreement. The dependency of a consensus index on the Delphi survey characteristics was expressed from 0.000 (no dependency) to 1.000 (full dependency). The number of questions (range: 6 to 40) in a survey did not have a notable impact whereby the dependency values remained below 0.030. The variation in sample size (range: 6 to 50) displayed the top three impacts for the Interquartile Range, the Clustered Mode and the Mode (dependency = 0.396, 0.130, 0.116, respectively). The Group Conformity Index, a construct akin to measuring stubbornness/flexibility of experts' opinions, greatly impacted all nine Delphi consensus indices (dependency = 0.200 to 0.504), except the Extremity CPWA and the Interquartile Range that were impacted only beyond the first decimal point (dependency = 0

An overview of research designs relevant to nursing: Part 1: quantitative research designs

OpenAIRE

Sousa,Valmi D.; Driessnack,Martha; Mendes,Isabel Amélia Costa

2007-01-01

This three part series of articles provides a brief overview of relevant research designs in nursing. The first article in the series presents the most frequently used quantitative research designs. Strategies for non-experimental and experimental research designs used to generate and refine nursing knowledge are described. In addition, the importance of quantitative designs and the role they play in developing evidence-based practice are discussed. Nursing care needs to be determined by the ...

Design and Validation of the Quantum Mechanics Conceptual Survey

Science.gov (United States)

McKagan, S. B.; Perkins, K. K.; Wieman, C. E.

2010-01-01

The Quantum Mechanics Conceptual Survey (QMCS) is a 12-question survey of students' conceptual understanding of quantum mechanics. It is intended to be used to measure the relative effectiveness of different instructional methods in modern physics courses. In this paper, we describe the design and validation of the survey, a process that included…

Empirical Research In Engineering Design

DEFF Research Database (Denmark)

Ahmed, Saeema

2007-01-01

Increasingly engineering design research involves the use of empirical studies that are conducted within an industrial environment [Ahmed, 2001; Court 1995; Hales 1987]. Research into the use of information by designers or understanding how engineers build up experience are examples of research...... of research issues. This paper describes case studies of empirical research carried out within industry in engineering design focusing upon information, knowledge and experience in engineering design. The paper describes the research methods employed, their suitability for the particular research aims...

A SUCCESSFUL BROADBAND SURVEY FOR GIANT Lyα NEBULAE. I. SURVEY DESIGN AND CANDIDATE SELECTION

International Nuclear Information System (INIS)

Prescott, Moire K. M.; Dey, Arjun; Jannuzi, Buell T.

2012-01-01

Giant Lyα nebulae (or Lyα 'blobs') are likely sites of ongoing massive galaxy formation, but the rarity of these powerful sources has made it difficult to form a coherent picture of their properties, ionization mechanisms, and space density. Systematic narrowband Lyα nebula surveys are ongoing, but the small redshift range covered and the observational expense limit the comoving volume that can be probed by even the largest of these surveys and pose a significant problem when searching for such rare sources. We have developed a systematic search technique designed to find large Lyα nebulae at 2 ∼ 2 NOAO Deep Wide-Field Survey Boötes field. With a total survey comoving volume of ≈10 8 h –3 70 Mpc 3 , this is the largest volume survey for Lyα nebulae ever undertaken. In this first paper in the series, we present the details of the survey design and a systematically selected sample of 79 candidates, which includes one previously discovered Lyα nebula.

A SUCCESSFUL BROADBAND SURVEY FOR GIANT Ly{alpha} NEBULAE. I. SURVEY DESIGN AND CANDIDATE SELECTION

Energy Technology Data Exchange (ETDEWEB)

Prescott, Moire K. M. [Department of Physics, Broida Hall, Mail Code 9530, University of California, Santa Barbara, CA 93106 (United States); Dey, Arjun; Jannuzi, Buell T., E-mail: mkpresco@physics.ucsb.edu [National Optical Astronomy Observatory, 950 North Cherry Avenue, Tucson, AZ 85719 (United States)

2012-04-01

Giant Ly{alpha} nebulae (or Ly{alpha} 'blobs') are likely sites of ongoing massive galaxy formation, but the rarity of these powerful sources has made it difficult to form a coherent picture of their properties, ionization mechanisms, and space density. Systematic narrowband Ly{alpha} nebula surveys are ongoing, but the small redshift range covered and the observational expense limit the comoving volume that can be probed by even the largest of these surveys and pose a significant problem when searching for such rare sources. We have developed a systematic search technique designed to find large Ly{alpha} nebulae at 2 {approx}< z {approx}< 3 within deep broadband imaging and have carried out a survey of the 9.4 deg{sup 2} NOAO Deep Wide-Field Survey Booetes field. With a total survey comoving volume of Almost-Equal-To 10{sup 8} h{sup -3}{sub 70} Mpc{sup 3}, this is the largest volume survey for Ly{alpha} nebulae ever undertaken. In this first paper in the series, we present the details of the survey design and a systematically selected sample of 79 candidates, which includes one previously discovered Ly{alpha} nebula.

Report of radioactivity survey research in fiscal year 1988

International Nuclear Information System (INIS)

1989-12-01

The National Institute of Radiological Sciences has been surveyed, as part of the radioactivity research project by the Science and Technology Agency, radioactivity levels in the environment and safety analysis for radioactive fallouts associated with nuclear weapons tests since 1959 and effluents from nuclear installations. With a remarkable advent of the peaceful applications of radionuclides, radioactivity in the environment has been becoming a matter of concern for the population in Japan. Radioactivity research is considered to become more important because it may provide clues for the basis of its influences upon the human body and environment. This report gives a survey of the radioactivity research project performed in the fiscal year 1988. The following topics are covered: (1) radioactivity levels and dosimetry in the environment, foods, and human body; (2) radioactivity levels surrounding nuclear installations; (3) services in the Radioactivity Survey Data Center; (4) basic survey of evaluation for the results of radioactivity levels; (5) training of technichians for monitoring environmental radioactivity; and (6) survey research for dosimetry and countermeasures at emergency. (N.K.)

Developing theory-driven design research

DEFF Research Database (Denmark)

Cash, Philip J.

2018-01-01

Design research is increasingly weak in comparison with other fields; without action to increase scientific, theoretical, and methodological rigour there is a real possibility of the field being superseded and becoming obsolete through lack of impact. The aim of this paper is to show how design r....... I identify key learning indicating future directions for theory-driven design research. I conclude by providing some concrete recommendations for the field of design research and individual design researchers....

Iranian mental health survey: design and field proced.

Directory of Open Access Journals (Sweden)

Afarin Rahimi-Movaghar

2014-06-01

Full Text Available Iranian Mental Health Survey (IranMHS was conducted to assess the twelve-month prevalence and severity of psychiatric disorders in the Iranian adult population and to determine the pattern of health care utilization and cost of services. IranMHS is a cross-sectional national household survey with face-to-face interviews as the main data collection method. The study was carried out between January and June 2011. A three-stage probability sampling was applied for the selection of a representative sample from the non-institutionalized population aged 15 to 64. The primary instrument utilized for assessing the prevalence of mental disorders was the Persian version of Composite International Diagnosis Interview, version 2.1. The instruments for assessing the service and cost of mental illness were developed by the research team. The response rate was 86.2%, and a total of 7886 individuals participated in the study. Sampling weights were the joint product of inverse probability of unit selection, non-response weights and post-stratification weights. This paper presents an overview of the study design, fieldwork organization and procedures, weightings and analysis. The strengths and limitations of the study are also discussed.

What Is This Thing Called "Design" in Design Research and Instructional Design

Science.gov (United States)

Cronje, Johannes

2013-01-01

This paper will consider the phenomenon of design research. It will then consider four research positions in social science research. The paper will show how the design perspectives map onto the research paradigms and how by rotating through these paradigms, a design research cycle is formed. Finally, the paper will discuss four research questions…

Constructive Synergy in Design Science Research: A Comparative Analysis of Design Science Research and the Constructive Research Approach

DEFF Research Database (Denmark)

Piirainen, Kalle; Gonzalez, Rafael A.

2014-01-01

Information systems research is focused on creating knowledge which can be applied in organizations. Design science research, which specifically aims at applying existing knowledge to solve interesting and relevant business problems, has been steadily gaining support in information systems research....... However, design science research is not the only design-oriented research framework available. Accordingly, this raises the question of whether there is something to learn between the different approaches. This paper contributes to answering this question by comparing design science research...... with the constructive research approach. The conclusion is that the two approaches are similar and compatible, save for details in practical requirements and partly underlying philosophical assumptions. The main finding that arises from the comparison is, however, that there is a potential problem in claiming knowledge...

Constructive Synergy in Design Science Research: A Comparative Analysis of Design Science Research and the Constructive Research Approach

DEFF Research Database (Denmark)

Piirainen, Kalle; Gonzalez, Rafael A.

2014-01-01

with the constructive research approach. The conclusion is that the two approaches are similar and compatible, save for details in practical requirements and partly underlying philosophical assumptions. The main finding that arises from the comparison is, however, that there is a potential problem in claiming knowledge......Information systems research is focused on creating knowledge which can be applied in organizations. Design science research, which specifically aims at applying existing knowledge to solve interesting and relevant business problems, has been steadily gaining support in information systems research....... However, design science research is not the only design-oriented research framework available. Accordingly, this raises the question of whether there is something to learn between the different approaches. This paper contributes to answering this question by comparing design science research...

Using a web-based survey tool to undertake a Delphi study: application for nurse education research.

Science.gov (United States)

Gill, Fenella J; Leslie, Gavin D; Grech, Carol; Latour, Jos M

2013-11-01

The Internet is increasingly being used as a data collection medium to access research participants. This paper reports on the experience and value of using web-survey software to conduct an eDelphi study to develop Australian critical care course graduate practice standards. The eDelphi technique used involved the iterative process of administering three rounds of surveys to a national expert panel. The survey was developed online using SurveyMonkey. Panel members responded to statements using one rating scale for round one and two scales for rounds two and three. Text boxes for panel comments were provided. For each round, the SurveyMonkey's email tool was used to distribute an individualized email invitation containing the survey web link. The distribution of panel responses, individual responses and a summary of comments were emailed to panel members. Stacked bar charts representing the distribution of responses were generated using the SurveyMonkey software. Panel response rates remained greater than 85% over all rounds. An online survey provided numerous advantages over traditional survey approaches including high quality data collection, ease and speed of survey administration, direct communication with the panel and rapid collation of feedback allowing data collection to be undertaken in 12 weeks. Only minor challenges were experienced using the technology. Ethical issues, specific to using the Internet to conduct research and external hosting of web-based software, lacked formal guidance. High response rates and an increased level of data quality were achieved in this study using web-survey software and the process was efficient and user-friendly. However, when considering online survey software, it is important to match the research design with the computer capabilities of participants and recognize that ethical review guidelines and processes have not yet kept pace with online research practices. Copyright © 2013 Elsevier Ltd. All rights reserved.

Participatory design based research

DEFF Research Database (Denmark)

Dau, Susanne; Bach Jensen, Louise; Falk, Lars

This poster reveal how participatory design based research by the use of a CoED inspired creative process can be used for designing solutions to problems regarding students study activities outside campus.......This poster reveal how participatory design based research by the use of a CoED inspired creative process can be used for designing solutions to problems regarding students study activities outside campus....

Web survey methodology

CERN Document Server

Callegaro, Mario; Vehovar, Asja

2015-01-01

Web Survey Methodology guides the reader through the past fifteen years of research in web survey methodology. It both provides practical guidance on the latest techniques for collecting valid and reliable data and offers a comprehensive overview of research issues. Core topics from preparation to questionnaire design, recruitment testing to analysis and survey software are all covered in a systematic and insightful way. The reader will be exposed to key concepts and key findings in the literature, covering measurement, non-response, adjustments, paradata, and cost issues. The book also discusses the hottest research topics in survey research today, such as internet panels, virtual interviewing, mobile surveys and the integration with passive measurements, e-social sciences, mixed modes and business intelligence. The book is intended for students, practitioners, and researchers in fields such as survey and market research, psychological research, official statistics and customer satisfaction research.

Report of radioactivity survey research in fiscal year 1996

International Nuclear Information System (INIS)

1997-12-01

In National Institute of Radiological Sciences, a survey was made on radioactivities in the environment due to the substances released from nuclear installations and radioactive fall-out brought out by nuclear explosion tests since 1959. As the marked progress of non-military utilization of nuclear energy the national concern on environmental radioactivity has been increasing in Japan and thus it has become more and more important to make a survey research of radioactivities, which might affect the environment and human health. In these situations, the institute attempted to make the following six surveys in the fiscal year of 1996; 'a survey on radioactive levels in environment, foods and human bodies', 'survey on the radioactive level in the regions around nuclear installations', 'works in radioactive data center', 'fundamental survey on the evaluation of the results from radioactivity survey', 'workshop for technical experts of environmental radioactivity monitoring' and 'survey research on the measurement and countermeasures for emergency exposure'. (M.N.)

Report of radioactivity survey research in fiscal year 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-01

In National Institute of Radiological Sciences, a survey was made on radioactivities in the environment due to the substances released from nuclear installations and radioactive fall-out brought out by nuclear explosion tests since 1959. As the marked progress of non-military utilization of nuclear energy the national concern on environmental radioactivity has been increasing in Japan and thus it has become more and more important to make a survey research of radioactivities, which might affect the environment and human health. In these situations, the institute attempted to make the following six surveys in the fiscal year of 1997; `a survey on radioactive levels in environment, foods and human bodies`, `survey on the radioactive level in the regions around nuclear installations`, `works in radioactive data center`, `fundamental survey on the evaluation of the results from radioactivity survey`, `workshop for technical experts of environmental radioactivity monitoring` and `survey research on the measurement and countermeasures for emergency exposure`. (J.P.N.)

Academic Librarians Would Benefit from Instruction on Conducting Research. A Review of: Kennedy, M. R., & Brancolini, K. R. (2012. Academic librarian research: A survey of attitudes, involvement, and perceived capabilities. College & Research Libraries, 73(5, 431-448.

Directory of Open Access Journals (Sweden)

Annie M. Hughes

2013-06-01

Full Text Available Objectives – To survey and ascertain the level of confidence academic librarians demonstrate with regard to performing and consuming research, as well as to gather information in order to plan a curriculum that would offer professional continuing education programming for librarians interested in enhancing their research skills.Design – Web-based survey of academic librarians on their level of confidence with regard to performing and consuming research.Setting – Various email lists with academic librarians as subscribers.Subjects – 918 self-selected academic librarians who subscribe to email lists.Methods – The authors chose to gather a convenience sample of academic librarians by sending a survey via various email lists. A link to an informed consent notice was sent via the request for participation and then linked to the survey. The survey consisted of 19 questions and gathered information regarding four areas: current research practices, self-evaluation of confidence in research practice, research courses in which the participants participated either during their library and information studies (LIS programs or through other means, and demographic information and information related to support provided by the librarians’ home institutions. The authors adapted their survey from other previously published surveys, and it was pre-tested for its effectiveness and reviewed by the Institutional Review Board. Question 10 included a confidence scale from 1-5 with 1 being “Not at All Confident” and 5 being “Very Confident.” The confidence scale was used to capture respondents’ self-perceptions of their research design expertise. Various statistical tests were performed.Main Results – The authors received 918 responses to their call for participation, with 809 completing the full survey; incomplete responses were not excluded. Results indicate that the vast majority of academic librarians are focused on staying current with

Gresham’s Law of Surveys and Quality Standards in Survey Research

Czech Academy of Sciences Publication Activity Database

Krejčí, Jindřich

2010-01-01

Roč. 8, 7-8 (2010), s. 3-6 ISSN 1214-1720 R&D Projects: GA MŠk LA09010 Institutional research plan: CEZ:AV0Z70280505 Keywords : cross-national comparative research * social survey methods Subject RIV: AO - Sociology, Demography http://www.socioweb.cz/upl/editorial/download/181_pdf%202010%2007%2008.pdf

Design of the South East Asian Nutrition Survey (SEANUTS): a four-country multistage cluster design study.

Science.gov (United States)

Schaafsma, Anne; Deurenberg, Paul; Calame, Wim; van den Heuvel, Ellen G H M; van Beusekom, Christien; Hautvast, Jo; Sandjaja; Bee Koon, Poh; Rojroongwasinkul, Nipa; Le Nguyen, Bao Khanh; Parikh, Panam; Khouw, Ilse

2013-09-01

Nutrition is a well-known factor in the growth, health and development of children. It is also acknowledged that worldwide many people have dietary imbalances resulting in over- or undernutrition. In 2009, the multinational food company FrieslandCampina initiated the South East Asian Nutrition Survey (SEANUTS), a combination of surveys carried out in Indonesia, Malaysia, Thailand and Vietnam, to get a better insight into these imbalances. The present study describes the general study design and methodology, as well as some problems and pitfalls encountered. In each of these countries, participants in the age range of 0·5-12 years were recruited according to a multistage cluster randomised or stratified random sampling methodology. Field teams took care of recruitment and data collection. For the health status of children, growth and body composition, physical activity, bone density, and development and cognition were measured. For nutrition, food intake and food habits were assessed by questionnaires, whereas in subpopulations blood and urine samples were collected to measure the biochemical status parameters of Fe, vitamins A and D, and DHA. In Thailand, the researchers additionally studied the lipid profile in blood, whereas in Indonesia iodine excretion in urine was analysed. Biochemical data were analysed in certified laboratories. Study protocols and methodology were aligned where practically possible. In December 2011, data collection was finalised. In total, 16,744 children participated in the present study. Information that will be very relevant for formulating nutritional health policies, as well as for designing innovative food and nutrition research and development programmes, has become available.

Optimising cluster survey design for planning schistosomiasis preventive chemotherapy.

Directory of Open Access Journals (Sweden)

Sarah C L Knowles

2017-05-01

Full Text Available The cornerstone of current schistosomiasis control programmes is delivery of praziquantel to at-risk populations. Such preventive chemotherapy requires accurate information on the geographic distribution of infection, yet the performance of alternative survey designs for estimating prevalence and converting this into treatment decisions has not been thoroughly evaluated.We used baseline schistosomiasis mapping surveys from three countries (Malawi, Côte d'Ivoire and Liberia to generate spatially realistic gold standard datasets, against which we tested alternative two-stage cluster survey designs. We assessed how sampling different numbers of schools per district (2-20 and children per school (10-50 influences the accuracy of prevalence estimates and treatment class assignment, and we compared survey cost-efficiency using data from Malawi. Due to the focal nature of schistosomiasis, up to 53% simulated surveys involving 2-5 schools per district failed to detect schistosomiasis in low endemicity areas (1-10% prevalence. Increasing the number of schools surveyed per district improved treatment class assignment far more than increasing the number of children sampled per school. For Malawi, surveys of 15 schools per district and 20-30 children per school reliably detected endemic schistosomiasis and maximised cost-efficiency. In sensitivity analyses where treatment costs and the country considered were varied, optimal survey size was remarkably consistent, with cost-efficiency maximised at 15-20 schools per district.Among two-stage cluster surveys for schistosomiasis, our simulations indicated that surveying 15-20 schools per district and 20-30 children per school optimised cost-efficiency and minimised the risk of under-treatment, with surveys involving more schools of greater cost-efficiency as treatment costs rose.

Report of radioactivity survey research in fiscal year 1989

International Nuclear Information System (INIS)

1990-12-01

In the National Institute of Radiological Sciences, as a part of the radioactivity survey and research of Science and Technology Agency, the survey of environmental radioactivity level due to the radioactive fallout accompanying nuclear explosion experiments and the radioactive substances released from nuclear facilities and others and the safety analysis of these have been carried out. The radioactivity and dose survey for environment, foods and human bodies, the survey of the level around nuclear facilities, the business of radioactivity data center, the basic investigation for the evaluation of the results of radioactivity survey, the training of environmental radiation monitoring technicians and the investigation and research of the measurement of emergency radiation exposure and countermeasures were carried out. Those results are summarized. (K.I.)

Developing the Librarians' Role in Supporting Grant Applications and Reducing Waste in Research: Outcomes from a Literature Review and Survey in the NIHR Research Design Service

Science.gov (United States)

Edmunds Otter, Mary L.; Wright, Judy M.; King, Natalie V.

2017-01-01

Librarians and information specialists' involvement during the development of grant applications for external funding can save researchers' time, provide specialist support, and contribute to reducing avoidable waste in research. This article presents a survey of information specialists working for the National Institute for Health Research's…

Investigating Design Research Landscapes through Exhibition

DEFF Research Database (Denmark)

Jönsson, Li; Hansen, Flemming Tvede; Mäkelä, Maarit

2013-01-01

What characterizes a design research exhibition compared to a traditional design and art exhibition? How do you show the very materialities of the design experiments as a means for communicating knowledge of research and of practice? How do you present, review and utilize such an exhibition......? With those questions in mind, the intention and challenge for the Nordes 2013 Design Research Exhibition was to expand on current notions of staging research enquires in design research conference contexts. Artefacts, installations, performances, and other materialities that relate to the theme...... of the conference - Experiments in Design Research – were displayed as tools to express and communicate different design research enquires. Through this paper we will describe the Nordes exhibition as a specific case that renders questions visible in relation to how to utilize a design research exhibition...

Survey Research in the Forest Science Journals - Insights from Journal Editors

Directory of Open Access Journals (Sweden)

Mirjana Stevanov

2015-06-01

Full Text Available Background and Purpose: Survey research is one of the most commonly applied approaches in the social sciences. In the forest research it has been used for more than five decades. In spite of that or the fact that the amount of survey-based articles in the forest science journals has increased during the last decade, their share in all articles published in 20 forest science journals (9,372 articles, 2005-2014 is quite modest (3.2%. In our paper we look at the opinions and attitudes of forest science journal editors towards survey research, as their perspective might enlarge our understanding of the use of this approach in the field of forestry. Materials and Methods: We selected 20 forest science journals - 15 from the SCI list and five non-SCI journals and contacted editors of these journals with the self-administered e-mail questionnaire. Data were collected in October 2014 and analyzed by descriptive statistics. The overall response rate was 75%. The assumptions for the study were based on the evidence addressing opinions and attitudes of journal editors from other research fields (finance since no similar study was found in the field of forestry. Results: The majority of editors reported the same review process for survey-based articles as for all others. In two journals, articles with the survey-based content are screened more rigorously and in two journals their publishing is generally discouraged. 40% of journal editors hold the view that no difference should be made between survey research and other types of original research, and another 40% think that survey research should in the first place play a complementary role. As the main strength of survey research editors see the possibility to obtain data unavailable from other sources. They perceive adverse selection and the difficulty to generalize results as the main weaknesses. Conclusions: Editors of forest science journals have similar opinion on survey research as those from the

Using Electronic Surveys: Advice from Survey Professionals.

Directory of Open Access Journals (Sweden)

David M. Shannon

2002-01-01

Full Text Available The study reports the perceptions and recommendations of sixty-two experienced survey..researchers from the American Educational Research Association regarding the use of..electronic surveys. The most positive aspects cited for the use of electronic surveys were..reduction of costs (i.e., postage, phone charges, the use of electronic mail for pre-notification or..follow-up purposes, and the compatibility of data with existing software programs. These..professionals expressed limitations in using electronic surveys pertaining to the limited..sampling frame as well as issues of confidentiality, privacy, and the credibility of the sample...They advised that electronic surveys designed with the varied technological background and..capabilities of the respondent in mind, follow sound principles of survey construction, and be..administered to pre-notified, targeted populations with published email addresses.

A survey of big data research

Science.gov (United States)

Fang, Hua; Zhang, Zhaoyang; Wang, Chanpaul Jin; Daneshmand, Mahmoud; Wang, Chonggang; Wang, Honggang

2015-01-01

Big data create values for business and research, but pose significant challenges in terms of networking, storage, management, analytics and ethics. Multidisciplinary collaborations from engineers, computer scientists, statisticians and social scientists are needed to tackle, discover and understand big data. This survey presents an overview of big data initiatives, technologies and research in industries and academia, and discusses challenges and potential solutions. PMID:26504265

Research design: the methodology for interdisciplinary research framework.

Science.gov (United States)

Tobi, Hilde; Kampen, Jarl K

2018-01-01

Many of today's global scientific challenges require the joint involvement of researchers from different disciplinary backgrounds (social sciences, environmental sciences, climatology, medicine, etc.). Such interdisciplinary research teams face many challenges resulting from differences in training and scientific culture. Interdisciplinary education programs are required to train truly interdisciplinary scientists with respect to the critical factor skills and competences. For that purpose this paper presents the Methodology for Interdisciplinary Research (MIR) framework. The MIR framework was developed to help cross disciplinary borders, especially those between the natural sciences and the social sciences. The framework has been specifically constructed to facilitate the design of interdisciplinary scientific research, and can be applied in an educational program, as a reference for monitoring the phases of interdisciplinary research, and as a tool to design such research in a process approach. It is suitable for research projects of different sizes and levels of complexity, and it allows for a range of methods' combinations (case study, mixed methods, etc.). The different phases of designing interdisciplinary research in the MIR framework are described and illustrated by real-life applications in teaching and research. We further discuss the framework's utility in research design in landscape architecture, mixed methods research, and provide an outlook to the framework's potential in inclusive interdisciplinary research, and last but not least, research integrity.

Organizational Influences on Interdisciplinary Interactions during Research and Design of Large-Scale Complex Engineered Systems

Science.gov (United States)

McGowan, Anna-Maria R.; Seifert, Colleen M.; Papalambros, Panos Y.

2012-01-01

The design of large-scale complex engineered systems (LaCES) such as an aircraft is inherently interdisciplinary. Multiple engineering disciplines, drawing from a team of hundreds to thousands of engineers and scientists, are woven together throughout the research, development, and systems engineering processes to realize one system. Though research and development (R&D) is typically focused in single disciplines, the interdependencies involved in LaCES require interdisciplinary R&D efforts. This study investigates the interdisciplinary interactions that take place during the R&D and early conceptual design phases in the design of LaCES. Our theoretical framework is informed by both engineering practices and social science research on complex organizations. This paper provides preliminary perspective on some of the organizational influences on interdisciplinary interactions based on organization theory (specifically sensemaking), data from a survey of LaCES experts, and the authors experience in the research and design. The analysis reveals couplings between the engineered system and the organization that creates it. Survey respondents noted the importance of interdisciplinary interactions and their significant benefit to the engineered system, such as innovation and problem mitigation. Substantial obstacles to interdisciplinarity are uncovered beyond engineering that include communication and organizational challenges. Addressing these challenges may ultimately foster greater efficiencies in the design and development of LaCES and improved system performance by assisting with the collective integration of interdependent knowledge bases early in the R&D effort. This research suggests that organizational and human dynamics heavily influence and even constrain the engineering effort for large-scale complex systems.

Utility FGD Survey, January--December 1989. Volume 2, Design performance data for operating FGD systems, Part 1

Energy Technology Data Exchange (ETDEWEB)

Hance, S.L.; McKibben, R.S.; Jones, F.M. [IT Corp., Cincinnati, OH (United States)

1992-03-01

The Utility flue gas desulfurization (FGD) Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company.

The Design Researcher in Quandary

DEFF Research Database (Denmark)

Kinch, Sofie; Fogtman, Majken Hillerup

2011-01-01

In the field of practice-based research we articulate the dilemma that emerges as the creative designer embraces the role of being an interaction design researcher. We exemplify the dilemma in a specific design case originating from a PhD project. In this case, we use sketching to illustrate how...... the design researcher embodies the creative designer at all times. We show how the dilemma becomes tangible in the conversation with the material when having to manage a set of design constraints, concerns and sensibilities. We acknowledge that when taking on both roles at the same time there are two...

Reflections on Design Methodology Research

DEFF Research Database (Denmark)

2011-01-01

We shall reflect on the results of Design Methodology research and their impact on design practice. In the past 50 years the number of researchers in the field has expanded enormously – as has the number of publications. During the same period design practice and its products have changed...... and produced are also now far more complex and distributed, putting designers under ever increasing pressure. We shall address the question: Are the results of Design Methodology research appropriate and are they delivering the expected results in design practice? In our attempt to answer this question we...

Designs 2002 further computational and constructive design theory

CERN Document Server

2003-01-01

This volume is a sequel to the 1996 compilation, Computational and Constructive Design Theory. It contains research papers and surveys of recent research work on two closely related aspects of the study of combinatorial designs: design construction and computer-aided study of designs. Audience: This volume is suitable for researchers in the theory of combinatorial designs

The 2003 Australian Breast Health Survey: survey design and preliminary results

Directory of Open Access Journals (Sweden)

Favelle Simone

2008-01-01

Full Text Available Abstract Background The Breast Health Surveys, conducted by the National Breast Cancer Centre (NBCC in 1996 and 2003, are designed to gain insight into the knowledge, attitudes and behaviours of a nationally representative sample of Australian women on issues relevant to breast cancer. In this article, we focus on major aspects of the design and present results on respondents' knowledge about mammographic screening. Methods The 2003 BHS surveyed English-speaking Australian women aged 30–69 without a history of breast cancer using computer-assisted telephone interviewing. Questions covered the following themes: knowledge and perceptions about incidence, mortality and risk; knowledge and behaviour regarding early detection, symptoms and diagnosis; mammographic screening; treatment; and accessibility and availability of information and services. Respondents were selected using a complex sample design involving stratification. Sample weights against Australian population benchmarks were used in all statistical analyses. Means and proportions for the entire population and by age group and area of residence were calculated. Statistical tests were conducted using a level of significance of 0.01. Results Of the 3,144 respondents who consented to being interviewed, 138 (4.4% had a previous diagnosis of breast cancer and were excluded leaving 3,006 completed interviews eligible for analysis. A majority of respondents (61.1% reported ever having had a mammogram and 29.1% identified mammography as being the best way of finding breast cancer. A majority of women (85.9% had heard of the BreastScreen Australia (BSA program, the national mammographic screening program providing free biennial screening mammograms, with 94.5% believing that BSA attendance was available regardless of the presence or absence of symptoms. There have been substantial gains in women's knowledge about mammographic screening over the seven years between the two surveys. Conclusion The

The 2003 Australian Breast Health Survey: survey design and preliminary results.

Science.gov (United States)

Villanueva, Elmer V; Jones, Sandra; Nehill, Caroline; Favelle, Simone; Steel, David; Iverson, Donald; Zorbas, Helen

2008-01-14

The Breast Health Surveys, conducted by the National Breast Cancer Centre (NBCC) in 1996 and 2003, are designed to gain insight into the knowledge, attitudes and behaviours of a nationally representative sample of Australian women on issues relevant to breast cancer. In this article, we focus on major aspects of the design and present results on respondents' knowledge about mammographic screening. The 2003 BHS surveyed English-speaking Australian women aged 30-69 without a history of breast cancer using computer-assisted telephone interviewing. Questions covered the following themes: knowledge and perceptions about incidence, mortality and risk; knowledge and behaviour regarding early detection, symptoms and diagnosis; mammographic screening; treatment; and accessibility and availability of information and services. Respondents were selected using a complex sample design involving stratification. Sample weights against Australian population benchmarks were used in all statistical analyses. Means and proportions for the entire population and by age group and area of residence were calculated. Statistical tests were conducted using a level of significance of 0.01. Of the 3,144 respondents who consented to being interviewed, 138 (4.4%) had a previous diagnosis of breast cancer and were excluded leaving 3,006 completed interviews eligible for analysis. A majority of respondents (61.1%) reported ever having had a mammogram and 29.1% identified mammography as being the best way of finding breast cancer. A majority of women (85.9%) had heard of the BreastScreen Australia (BSA) program, the national mammographic screening program providing free biennial screening mammograms, with 94.5% believing that BSA attendance was available regardless of the presence or absence of symptoms. There have been substantial gains in women's knowledge about mammographic screening over the seven years between the two surveys. The NBCC Breast Health Surveys provide a valuable picture of the

Sharing Video Datasets in Design Research

DEFF Research Database (Denmark)

Christensen, Bo; Abildgaard, Sille Julie Jøhnk

2017-01-01

This paper examines how design researchers, design practitioners and design education can benefit from sharing a dataset. We present the Design Thinking Research Symposium 11 (DTRS11) as an exemplary project that implied sharing video data of design processes and design activity in natural settings...... with a large group of fellow academics from the international community of Design Thinking Research, for the purpose of facilitating research collaboration and communication within the field of Design and Design Thinking. This approach emphasizes the social and collaborative aspects of design research, where...... a multitude of appropriate perspectives and methods may be utilized in analyzing and discussing the singular dataset. The shared data is, from this perspective, understood as a design object in itself, which facilitates new ways of working, collaborating, studying, learning and educating within the expanding...

Survey of injury sources for a trampoline with equipment hazards designed out.

Science.gov (United States)

Eager, David; Scarrott, Carl; Nixon, Jim; Alexander, Keith

2012-07-01

In Australia, trampolines contribute approximately one-quarter of all childhood play-equipment injuries. The purpose of this study was to gather and evaluate injury data from a nontraditional, 'soft-edged', consumer trampoline in which the equipment injury sources have been designed out. A survey was undertaken in Queensland and New South Wales. The manufacturer of the nontraditional trampoline provided the University of Technology, Sydney, with their Australian customer database. Injury data were gathered in a pilot study by phone interview, then in a full study through an email survey. Results from 3817 respondents were compared with earlier Australian and US data from traditional trampolines gathered from emergency departments.   A significantly lower proportion of the injuries caused by falling off or striking the equipment was found for this new design when compared with traditional trampolines both in Australia and in the USA. The age of children being injured on trampolines in Australia was found to be markedly lower than in North America. This research indicates that with appropriate design the more severe injuries on traditional trampolines can be significantly reduced. © 2012 The Authors. Journal of Paediatrics and Child Health © 2012 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

A survey of research programs in radiation protection in Canada

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

A survey of research programs in Canada concerned with radiation protection was conducted in 1991-92 by the Joint Subcommittee on Regulatory Research (JSCRR) of the Atomic Energy Control Board (AECB) Advisory Committees on Radiological Protection and on Nuclear Safety. The purpose of this survey was to determine the current state of funding for this type of research in Canada. Funding for health-related radiation research in Canada is critical to establishing and maintaining a supply of trained professionals who can provide competent advice on health-related problems in radiation protection. The present report is an analysis of the information received in this survey. This survey concludes with the recommendation that the organization and definition of subprograms for the AECB Regulatory Research and Support Program should be completed as soon as possible. In this report the JSCRR should assist AECB staff in preparing a report in which priorities for research related to radiation protection are indicated. The sources of information noted at the end of the Discussion section of this report should be considered for this purpose. (author). 15 refs., 3 tabs.

A survey of research programs in radiation protection in Canada

International Nuclear Information System (INIS)

1995-07-01

A survey of research programs in Canada concerned with radiation protection was conducted in 1991-92 by the Joint Subcommittee on Regulatory Research (JSCRR) of the Atomic Energy Control Board (AECB) Advisory Committees on Radiological Protection and on Nuclear Safety. The purpose of this survey was to determine the current state of funding for this type of research in Canada. Funding for health-related radiation research in Canada is critical to establishing and maintaining a supply of trained professionals who can provide competent advice on health-related problems in radiation protection. The present report is an analysis of the information received in this survey. This survey concludes with the recommendation that the organization and definition of subprograms for the AECB Regulatory Research and Support Program should be completed as soon as possible. In this report the JSCRR should assist AECB staff in preparing a report in which priorities for research related to radiation protection are indicated. The sources of information noted at the end of the Discussion section of this report should be considered for this purpose. (author). 15 refs., 3 tabs

Increasing both the public health potential of basic research and the scientist satisfaction. An international survey of bio-scientists.

Science.gov (United States)

Sorrentino, Carmen; Boggio, Andrea; Confalonieri, Stefano; Hemenway, David; Scita, Giorgio; Ballabeni, Andrea

2016-01-01

Basic scientific research generates knowledge that has intrinsic value which is independent of future applications. Basic research may also lead to practical benefits, such as a new drug or diagnostic method. Building on our previous study of basic biomedical and biological researchers at Harvard, we present findings from a new survey of similar scientists from three countries. The goal of this study was to design policies to enhance both the public health potential and the work satisfaction and test scientists' attitudes towards these factors. The present survey asked about the scientists' motivations, goals and perspectives along with their attitudes concerning  policies designed to increase both the practical (i.e. public health) benefits of basic research as well as their own personal satisfaction. Close to 900 basic investigators responded to the survey; results corroborate the main findings from the previous survey of Harvard scientists. In addition, we find that most bioscientists disfavor present policies that require a discussion of the public health potential of their proposals in grants but generally favor softer policies aimed at increasing the quality of work and the potential practical benefits of basic research. In particular, bioscientists are generally supportive of those policies entailing the organization of more meetings between scientists and the general public, the organization of more academic discussion about the role of scientists in the society, and the implementation of a "basic bibliography" for each new approved drug.

Dynamics of Research through Design

DEFF Research Database (Denmark)

Basballe, Ditte Amund; Halskov, Kim

2012-01-01

In this paper, we investigate Research through Design at a micro-level, by addressing the dynamic interplay of research and design as they unfold throughout a design process. As our principal case, we consider the design of a three-dimensional projection installation, a process that unfolded over...... a one-year period. We analyse material collected from 18 key events during the process, in order to identify the ongoing dynamics. Based on the analysis, we establish how the interplay evolves in a complex structure, where the design and research interests continuously couple, interweave, and decouple...

Dynamics of Research through Design

DEFF Research Database (Denmark)

Basballe, Ditte Amund; Halskov, Kim

2012-01-01

a one-year period. We analyse material collected from 18 key events during the process, in order to identify the ongoing dynamics. Based on the analysis, we establish how the interplay evolves in a complex structure, where the design and research interests continuously couple, interweave, and decouple......In this paper, we investigate Research through Design at a micro-level, by addressing the dynamic interplay of research and design as they unfold throughout a design process. As our principal case, we consider the design of a three-dimensional projection installation, a process that unfolded over...

Methodological design of the National Health and Nutrition Survey 2016

OpenAIRE

Martín Romero-Martínez; Teresa Shamah-Levy; Lucia Cuevas-Nasu; Ignacio Méndez Gómez-Humarán; Elsa Berenice Gaona-Pineda; Luz María Gómez-Acosta; Juan Ángel Rivera-Dommarco; Mauricio Hernández-Ávila

2017-01-01

Objective. Describe the design methodology of the halfway health and nutrition national survey (Ensanut-MC) 2016. Materials and methods. The Ensanut-MC is a national probabilistic survey whose objective population are the in­habitants of private households in Mexico. The sample size was determined to make inferences on the urban and rural areas in four regions. Describes main design elements: target population, topics of study, sampling procedure, measurement procedure and logistics organizat...

Hydroclimatic variability and predictability: a survey of recent research

Directory of Open Access Journals (Sweden)

R. D. Koster

2017-07-01

Full Text Available Recent research in large-scale hydroclimatic variability is surveyed, focusing on five topics: (i variability in general, (ii droughts, (iii floods, (iv land–atmosphere coupling, and (v hydroclimatic prediction. Each surveyed topic is supplemented by illustrative examples of recent research, as presented at a 2016 symposium honoring the career of Professor Eric Wood. Taken together, the recent literature and the illustrative examples clearly show that current research into hydroclimatic variability is strong, vibrant, and multifaceted.

Fashion Research at Design Schools

DEFF Research Database (Denmark)

Skjold, Else

2008-01-01

as a continuation of the way teaching in fashion design and research on fashion is perceived in the various cases. This of course implements the fact that there are very diverse perceptions on what fashion research is.  A main discussion therefore concerns current methodological diversities in fashion research......The report “Fashion Research at Design Schools” (2008), which was commissioned by Institute for Fashion and Textiles at Designskolen Kolding,  appoints the potentials and challenges in relation to the ongoing academization of design schools, with a specific focus on fashion research. The key...... research question is: “What kind of fashion design education is Designskolen Kolding aiming to offer in the future, what kind of skills will the students need in their future work place, the fashion industry, and can research work as a potential in this process?”   The study is based on qualitative...

Enhancing Field Research Methods with Mobile Survey Technology

Science.gov (United States)

Glass, Michael R.

2015-01-01

This paper assesses the experience of undergraduate students using mobile devices and a commercial application, iSurvey, to conduct a neighborhood survey. Mobile devices offer benefits for enhancing student learning and engagement. This field exercise created the opportunity for classroom discussions on the practicalities of urban research, the…

Research priorities in health communication and participation: international survey of consumers and other stakeholders

Science.gov (United States)

Bragge, Peter; Lowe, Dianne; Nunn, Jack S; O’Sullivan, Molly; Horvat, Lidia; Tong, Allison; Kay, Debra; Ghersi, Davina; McDonald, Steve; Poole, Naomi; Bourke, Noni; Lannin, Natasha; Vadasz, Danny; Oliver, Sandy; Carey, Karen; Hill, Sophie J

2018-01-01

Objective To identify research priorities of consumers and other stakeholders to inform Cochrane Reviews in ‘health communication and participation’ (including such concepts as patient experience, shared decision-making and health literacy). Setting International. Participants We included anyone with an interest in health communication and participation. Up to 151 participants (18–80 years; 117 female) across 12 countries took part, including 48 consumers (patients, carers, consumer representatives) and 75 professionals (health professionals, policymakers, researchers) (plus 25 people who identified as both). Design Survey. Methods We invited people to submit their research ideas via an online survey open for 4 weeks. Using inductive thematic analysis, we generated priority research topics, then classified these into broader themes. Results Participants submitted 200 research ideas, which we grouped into 21 priority topics. Key research priorities included: insufficient consumer involvement in research (19 responses), ‘official’ health information is contradictory and hard to understand (18 responses), communication/coordination breakdowns in health services (15 responses), health information provision a low priority for health professionals (15 responses), insufficient eliciting of patient preferences (14 responses), health services poorly understand/implement patient-centred care (14 responses), lack of holistic care impacting healthcare quality and safety (13 responses) and inadequate consumer involvement in service design (11 responses). These priorities encompassed acute and community health settings, with implications for policy and research. Priority populations of interest included people from diverse cultural and linguistic backgrounds, carers, and people with low educational attainment, or mental illness. Most frequently suggested interventions focused on training and cultural change activities for health services and health professionals

Research engagement of health sciences librarians: a survey of research-related activities and attitudes.

Science.gov (United States)

Lessick, Susan; Perryman, Carol; Billman, Brooke L; Alpi, Kristine M; De Groote, Sandra L; Babin, Ted D

2016-04-01

The extent to which health sciences librarians are engaged in research is a little-studied question. This study assesses the research activities and attitudes of Medical Library Association (MLA) members, including the influence of work affiliation. An online survey was designed using a combination of multiple-choice and open-ended questions and distributed to MLA members. Responses were analyzed using descriptive statistics, content analysis, and significance testing. The authors used statistical tools and categorized open-ended question topics by the constant comparative method, also applying the broad subject categories used in a prior study. Pearson's chi-square analysis was performed on responses to determine significant differences among respondents employed in three different institutional environments. Analysis showed that 79% of respondents read research articles at least once a month; 58% applied published research studies to practice; 44% had conducted research; 62% reported acting on research had enhanced their libraries; 38% had presented findings; and 34% had authored research articles. Hospital librarians were significantly less likely than academic librarians to have participated in research activities. Highly ranked research benefits, barriers, and competencies of health sciences librarians are described. Findings indicate that health sciences librarians are actively engaged in research activities. Practice implications for practitioners, publishers, and stakeholders are discussed. Results suggest that practitioners can use published research results and results from their own research to affect practice decisions and improve services. Future studies are needed to confirm and extend these findings, including the need for intervention studies to increase research and writing productivity.

Research engagement of health sciences librarians: a survey of research-related activities and attitudes

Directory of Open Access Journals (Sweden)

Susan Lessick, MA, MLS, AHIP, FMLA

2016-11-01

Full Text Available Introduction: The extent to which health sciences librarians are engaged in research is a little-studied question. This study assesses the research activities and attitudes of Medical Library Association (MLA members, including the influence of work affiliation. Methods: An online survey was designed using a combination of multiple-choice and open-ended questions and distributed to MLA members. Responses were analyzed using descriptive statistics, content analysis, and significance testing. The authors used statistical tools and categorized openended question topics by the constant comparative method, also applying the broad subject categories used in a prior study. Pearson’s chi-square analysis was performed on responses to determine significant differences among respondents employed in three different institutional environments. Results: Analysis showed that 79% of respondents read research articles at least once a month; 58% applied published research studies to practice; 44% had conducted research; 62% reported acting on research had enhanced their libraries; 38% had presented findings; and 34% had authored research articles. Hospital librarians were significantly less likely than academic librarians to have participated in research activities. Highly ranked research benefits, barriers, and competencies of health sciences librarians are described. Conclusions: Findings indicate that health sciences librarians are actively engaged in research activities. Practice implications for practitioners, publishers, and stakeholders are discussed. Results suggest that practitioners can use published research results and results from their own research to affect practice decisions and improve services. Future studies are needed to confirm and extend these findings, including the need for intervention studies to increase research and writing productivity.

Large Synoptic Survey Telescope: From Science Drivers to Reference Design

Energy Technology Data Exchange (ETDEWEB)

Ivezic, Z.; Axelrod, T.; Brandt, W.N.; Burke, D.L.; Claver, C.F.; Connolly, A.; Cook, K.H.; Gee, P.; Gilmore, D.K.; Jacoby, S.H.; Jones, R.L.; Kahn, S.M.; Kantor, J.P.; Krabbendam, V.; Lupton, R.H.; Monet, D.G.; Pinto, P.A.; Saha, A.; Schalk, T.L.; Schneider, D.P.; Strauss, Michael A.; /Washington U., Seattle, Astron. Dept. /LSST Corp. /Penn State U., Astron. Astrophys. /KIPAC, Menlo Park /NOAO, Tucson /LLNL, Livermore /UC, Davis /Princeton U., Astrophys. Sci. Dept. /Naval Observ., Flagstaff /Arizona U., Astron. Dept. - Steward Observ. /UC, Santa Cruz /Harvard U. /Johns Hopkins U. /Illinois U., Urbana

2011-10-14

In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next-generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST). LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pachon in Northern Chile. The current baseline design, with an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg{sup 2} field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg{sup 2} with {delta} < +34.5{sup o}, and will be imaged multiple times in six bands, ugrizy, covering the wavelength range 320-1050 nm. About 90% of the observing time will be devoted to a deep-wide-fast survey mode which will observe a 20,000 deg{sup 2} region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We describe how the

Large Synoptic Survey Telescope: From science drivers to reference design

Directory of Open Access Journals (Sweden)

Ivezić Ž.

2008-01-01

Full Text Available In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next- generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST. LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pachon in Northern Chile. The current baseline design, with an 8.4 m (6.5 m effective primary mirror, a 9.6 deg2 field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg2 with δ < +34.5◦ , and will be imaged multiple times in six bands, ugrizy, covering the wavelength range 320-1050 nm. About 90% of the observing time will be devoted to a deep- wide-fast survey mode which will observe a 20,000 deg2 region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We describe how the LSST

Large Synoptic Survey Telescope: From Science Drivers To Reference Design

Directory of Open Access Journals (Sweden)

Ivezić, Ž.

2008-06-01

Full Text Available In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next-generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST. LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pach'{o}n in Northern Chile. The current baseline design, with an 8.4, m (6.5, m effective primary mirror, a 9.6 deg$^2$ field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg$^2$ with $delta<+34.5^circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\\% of the observing time will be devoted to a deep-wide-fast survey mode which will observe a 20,000 deg$^2$ region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10\\% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We

Engaging Students in Survey Research Projects across Research Methods and Statistics Courses

Science.gov (United States)

Lovekamp, William E.; Soboroff, Shane D.; Gillespie, Michael D.

2017-01-01

One innovative way to help students make sense of survey research has been to create a multifaceted, collaborative assignment that promotes critical thinking, comparative analysis, self-reflection, and statistical literacy. We use a short questionnaire adapted from the Higher Education Research Institute's Cooperative Institutional Research…

Surveying views on Payments for Ecosystem Services: implications for environmental management and research

OpenAIRE

Waylen, KJ; Martin-Ortega, J

2018-01-01

The concept of Payments for Ecosystem Services (PES) is globally of increasing interest. However, little is known about the views and expectations of professionals and practitioners expected to enable or implement this concept. Since these individuals design, select, shape and deliver environmental management, their views and expectations are critical to understanding how PES may play out in practice. Using the first survey on this topic, in the UK this research discusses the implications for...

Research design models: a new category

International Nuclear Information System (INIS)

Burgeson, D.A.

1983-01-01

This paper discusses the concept of a research design model and how it differs from an engineering design model. Essentially, the research design model draws on the methods, materials and processes of engineering design models but more emphasis is placed on conceptualization in 3-D. Typically, equipment and processes in research are unique. Often, there are competing concepts from which to decide. The approach which is evolving at Sandia National Laboratories mixes preliminary, engineering and research design on the same model

Experiential design landscapes: design research in the wild

NARCIS (Netherlands)

Peeters, M.M.R.; Megens, C.J.P.G.; IJsselsteijn, W.A.; Hummels, C.C.M.; Brombacher, A.C.; Brandt, E.; Ehn, P.; Johansson, T.; Johansson, T.D.; Hellström Reimer, M.; Markussen, T.; Vallgårda, A.

2013-01-01

Thanks to the emergence of new sensing and behaviour tracking technologies, design research can take place anywhere and anytime in the real world. When doing design research, a trade-off has to be made between experimental control and ecological validity. In this paper, we compare Experiential

survey research in practical theology and congregational studies

African Journals Online (AJOL)

such as the social, political and economic environment that influence society also affect the ... correlation research is part of a quantitative research methodology and could contribute to ... Another type is qualitative survey that focuses on the ...

Game Design as STS Research

Directory of Open Access Journals (Sweden)

Joseph Dumit

2017-09-01

Full Text Available Game design offers a powerful pedagogical paradigm for engaging students in thinking and researching sociotechnical systems. Using the example of designing a game around fracking, this paper describes how game design grapples with emergent dynamic processes, and how students are drawn into becoming STS researchers.

Challenges in Nordic Design Research

DEFF Research Database (Denmark)

Andreasen, Mogens Myrup

1996-01-01

Design research has not won a convincing reputation in industry. Nordic research being scattered and small in number of researchers should find its special strengths and focus on creating results, which are based on our peculiar conditions and background.......Design research has not won a convincing reputation in industry. Nordic research being scattered and small in number of researchers should find its special strengths and focus on creating results, which are based on our peculiar conditions and background....

Research by Design, Demarcation and Recoginition

NARCIS (Netherlands)

Doevendans, C.H.; Sap, H.A.; Langenhuizen, Anja; Ouwerkerk, Marieke van; Rosemann, Jurgen

2001-01-01

There is a strong tendency to see designing as a form of research; research by design. On the other hand it is stated that the urban design discipline has ceased to exist or does not develop anymore. Is this correct and can 'research by design' change this situation? These are the questions of

Technology, design and dementia: an exploratory survey of developers.

Science.gov (United States)

Jiancaro, Tizneem; Jaglal, Susan B; Mihailidis, Alex

2017-08-01

Despite worldwide surges in dementia, we still know relatively little about the design of home technologies that support this population. The purpose of this study was to investigate design considerations from the perspective of developers. Participants, including technical and clinical specialists, were recruited internationally and answered web-based survey questions comprising Likert-type responses with text entry options. Developers were queried on 23 technology acceptance characteristics and 24 design practices. In all, forty developers completed the survey. Concerning "technology acceptance", cost, learnability, self-confidence (during use) and usability were deemed very important. Concerning "design practice", developers overwhelmingly valued user-centred design (UCD). In terms of general assistive technology (AT) models, these were largely unknown by technical specialists compared to clinical specialists. Recommendations based on this study include incorporating "self-confidence" into design protocols; examining the implications of "usability" and UCD in this context; and considering empathy-based design approaches to suit a diverse user population. Moreover, clinical specialists have much to offer development teams, particularly concerning the use of conceptual AT models. Implications of rehabilitation Stipulate precise usability criteria. Consider "learnability" and "self-confidence" as technology adoption criteria. Recognize the important theoretical role that clinical specialists can fulfil concerning the use of design schemas. Acknowledge the diversity amongst users with dementia, potentially adopting techniques, such as designing for "extraordinary users".

Probability sampling design in ethnobotanical surveys of medicinal plants

Directory of Open Access Journals (Sweden)

Mariano Martinez Espinosa

2012-07-01

Full Text Available Non-probability sampling design can be used in ethnobotanical surveys of medicinal plants. However, this method does not allow statistical inferences to be made from the data generated. The aim of this paper is to present a probability sampling design that is applicable in ethnobotanical studies of medicinal plants. The sampling design employed in the research titled "Ethnobotanical knowledge of medicinal plants used by traditional communities of Nossa Senhora Aparecida do Chumbo district (NSACD, Poconé, Mato Grosso, Brazil" was used as a case study. Probability sampling methods (simple random and stratified sampling were used in this study. In order to determine the sample size, the following data were considered: population size (N of 1179 families; confidence coefficient, 95%; sample error (d, 0.05; and a proportion (p, 0.5. The application of this sampling method resulted in a sample size (n of at least 290 families in the district. The present study concludes that probability sampling methods necessarily have to be employed in ethnobotanical studies of medicinal plants, particularly where statistical inferences have to be made using data obtained. This can be achieved by applying different existing probability sampling methods, or better still, a combination of such methods.

A survey of etiologic hypotheses among testicular cancer researchers

DEFF Research Database (Denmark)

Stang, A; Trabert, B; Rusner, C

2015-01-01

Basic research results can provide new ideas and hypotheses to be examined in epidemiological studies. We conducted a survey among testicular cancer researchers on hypotheses concerning the etiology of this malignancy. All researchers on the mailing list of Copenhagen Testis Cancer Workshops...... and corresponding authors of PubMed-indexed articles identified by the search term 'testicular cancer' and published within 10 years (in total 2750 recipients) were invited to respond to an e-mail-based survey. Participants of the 8th Copenhagen Testis Cancer Workshop in May 2014 were subsequently asked to rate...... that scored as most plausible. We also present plans for improving the survey that may be repeated at a next international meeting of experts in testicular cancer. Overall 52 of 99 (53%) registered participants of the 8th Copenhagen Testis Cancer Workshop submitted the plausibility rating form. Fourteen of 27...

The Influence of the Design of Web Survey Questionnaires on the Quality of Responses

Directory of Open Access Journals (Sweden)

Stéphane Ganassali

2008-03-01

Full Text Available he first objective of this article is to propose a conceptual framework of the effects of on-line questionnaire design on the quality of collected responses. Secondly, we present the results of an experiment where different protocols have been tested and compared in a randomised design using the basis of several quality indexes. Starting from some previous categorizations, and from the main factors identified in the literature, we first propose an initial global framework of the questionnaire and question characteristics in a web survey, divided into five groups of factors. Our framework was built to follow the response process successive stages of the contact between the respondent and the questionnaire itself. Then, because it has been studied in the survey methodology literature in a very restricted way, the concept of `response quality' is discussed and extended with some more `qualitative' criteria that could be helpful for researchers and practitioners, in order to obtain a deeper assessment of the survey output. As an experiment, on the basis of the factors chosen as major characteristics of the questionnaire design, eight versions of a questionnaire related to young people's consumption patterns were created. The links to these on-line questionnaires were sent in November 2005 to a target of 10,000 young people. The article finally presents the results of our study and discusses the conclusions. Very interesting results come to light; especially regarding the influence of length, interaction and question wording dimensions on response quality. We discuss the effects of Web-questionnaire design characteristics on the quality of data.

Design Science Research

DEFF Research Database (Denmark)

Pries-Heje, Jan; Venable, John; Baskerville, Richard L.

2017-01-01

This workshop is an applied tutorial, aimed at novice and experienced researchers who wish to learn more about Design Science Research (DSR) and/or to develop and progress their own DSR work. During the workshop, attendees will be introduced to various DSR concepts and current trends, to create...

Exploring Ethical Issues Associated with Using Online Surveys in Educational Research

Science.gov (United States)

Roberts, Lynne D.; Allen, Peter J.

2015-01-01

Online surveys are increasingly used in educational research, yet little attention has focused on ethical issues associated with their use in educational settings. Here, we draw on the broader literature to discuss 5 key ethical issues in the context of educational survey research: dual teacher/researcher roles; informed consent; use of…

Public priorities for osteoporosis and fracture research: results from a general population survey.

Science.gov (United States)

Paskins, Zoe; Jinks, Clare; Mahmood, Waheed; Jayakumar, Prakash; Sangan, Caroline B; Belcher, John; Gwilym, Stephen

2017-12-01

This is the first national study of public and patient research priorities in osteoporosis and fracture. We have identified new research areas of importance to members of the public, particularly 'access to information from health professionals'. The findings are being incorporated into the research strategy of the National Osteoporosis Society. This study aimed to prioritise, with patients and public members, research topics for the osteoporosis research agenda. An e-survey to identify topics for research was co-designed with patient representatives. A link to the e-survey was disseminated to supporters of the UK National Osteoporosis Society (NOS) in a monthly e-newsletter. Responders were asked to indicate their top priority for research across four topics (understanding and preventing osteoporosis, living with osteoporosis, treating osteoporosis and treating fractures) and their top three items within each topic. Descriptive statistics were used to describe demographics and item ranking. A latent class analysis was applied to identify a substantive number of clusters with different combinations of binary responses. One thousand one hundred eighty-eight (7.4%) respondents completed the e-survey. The top three items overall were 'Having easy access to advice and information from health professionals' (63.8%), 'Understanding further the safety and benefit of osteoporosis drug treatments' (49.9%) and 'Identifying the condition early by screening' (49.2%). Latent class analysis revealed distinct clusters of responses within each topic including primary care management and self-management. Those without a history of prior fracture or aged under 70 were more likely to rate items within the cluster of self-management as important (21.0 vs 12.9 and 19.8 vs 13.3%, respectively). This is the first study of public research priorities in osteoporosis and has identified new research areas of importance to members of the public including access to information. The findings

Design Research and the Solo Higher Degree Research Student: Strategies to Embed Trustworthiness and Validity into the Research Design

Science.gov (United States)

Kennedy-Clark, Shannon

2012-01-01

This paper puts forward a set of criteria for ensuring trustworthiness in design research studies undertaken by Higher Degree Research (HDR) students. Design research is aimed at exploring educational problems and refining theory and practice by defining a pedagogical outcome and is a methodological approach often associated with the Learning…

The Design Social: Framing social research methods for design postgraduates.

OpenAIRE

Evans, Martyn

2010-01-01

This paper discusses approaches for framing social research methods within postgraduate design curricula, details the responses of postgraduate design students to the possibilities presented by social research methods, and concludes with a case study of the adoption experiences of PhD students in design when engaging with social research methods. Analysis of semi-structured interviews is employed to draw out perceptions and experiences of design postgraduates when engaging with social researc...

A new design of neutron survey instrument

International Nuclear Information System (INIS)

Tanner, R.J.; Eakins, J.S.; Hager, L.G.

2010-01-01

A novel design of neutron survey instrument has been developed. The moderator has been modified via the use of 'neutron guides', which help thermal neutrons reach the central proportional counter. This innovation has allowed the variations in the energy dependence of ambient dose equivalent response to be reduced compared to prior single-detector designs, whilst maintaining a relatively light moderator and simple construction. In particular, the design has a relatively small over-response to neutrons with energies around 5 keV, when compared to prior designs. The final optimized design has been verified using MCNP5 calculations to ensure that the response is relatively independent of the energy and direction of the incident neutron. This has required the ends of the guides to be structured so that unidirectional and isotropic neutron fields have closely matched responses, as is necessary in the workplace. The reading of the instrument in workplace fields is calculated via folding and the suitability of the design for use in the workplace discussed.

A survey of etiologic hypotheses among testicular cancer researchers.

Science.gov (United States)

Stang, A; Trabert, B; Rusner, C; Poole, C; Almstrup, K; Rajpert-De Meyts, E; McGlynn, K A

2015-01-01

Basic research results can provide new ideas and hypotheses to be examined in epidemiological studies. We conducted a survey among testicular cancer researchers on hypotheses concerning the etiology of this malignancy. All researchers on the mailing list of Copenhagen Testis Cancer Workshops and corresponding authors of PubMed-indexed articles identified by the search term 'testicular cancer' and published within 10 years (in total 2750 recipients) were invited to respond to an e-mail-based survey. Participants of the 8th Copenhagen Testis Cancer Workshop in May 2014 were subsequently asked to rate the plausibility of the suggested etiologic hypotheses on a scale of 1 (very implausible) to 10 (very plausible). This report describes the methodology of the survey, the score distributions by individual hypotheses, hypothesis group, and the participants' major research fields, and discuss the hypotheses that scored as most plausible. We also present plans for improving the survey that may be repeated at a next international meeting of experts in testicular cancer. Overall 52 of 99 (53%) registered participants of the 8th Copenhagen Testis Cancer Workshop submitted the plausibility rating form. Fourteen of 27 hypotheses were related to exposures during pregnancy. Hypotheses with the highest mean plausibility ratings were either related to pre-natal exposures or exposures that might have an effect during pregnancy and in post-natal life. The results of the survey may be helpful for triggering more specific etiologic hypotheses that include factors related to endocrine disruption, DNA damage, inflammation, and nutrition during pregnancy. The survey results may stimulate a multidisciplinary discussion about new etiologic hypotheses of testicular cancer. Published 2014. This article is a U. S. Government work and is in the public domain in the USA.

Design of a multipurpose research reactor

International Nuclear Information System (INIS)

Sanchez Rios, A.A.

1990-01-01

The availability of a research reactor is essential in any endeavor to improve the execution of a nuclear programme, since it is a very versatile tool which can make a decisive contribution to a country's scientific and technological development. Because of their design, however, many existing research reactors are poorly adapted to certain uses. In some nuclear research centres, especially in the advanced countries, changes have been made in the original designs or new research prototypes have been designed for specific purposes. These modifications have proven very costly and therefore beyond the reach of developing countries. For this reason, what the research institutes in such countries need is a single sufficiently versatile nuclear plant capable of meeting the requirements of a nuclear research programme at a reasonable cost. This is precisely what a multipurpose reactor does. The Mexican National Nuclear Research Institute (ININ) plans to design and build a multipurpose research reactor capable at the same time of being used for the development of reactor design skills and for testing nuclear materials and fuels, for radioisotopes production, for nuclear power studies and basic scientific research, for specialized training, and so on. For this design work on the ININ Multipurpose Research Reactor, collaborative relations have been established with various international organizations possessing experience in nuclear reactor design: Atomehnergoeksport of the USSR: Atomic Energy of Canada Limited (AECL); General Atomics (GA) of the USA; and Japan Atomic Energy Research Institute

Research design and statistical analysis

CERN Document Server

Myers, Jerome L; Lorch Jr, Robert F

2013-01-01

Research Design and Statistical Analysis provides comprehensive coverage of the design principles and statistical concepts necessary to make sense of real data.  The book's goal is to provide a strong conceptual foundation to enable readers to generalize concepts to new research situations.  Emphasis is placed on the underlying logic and assumptions of the analysis and what it tells the researcher, the limitations of the analysis, and the consequences of violating assumptions.  Sampling, design efficiency, and statistical models are emphasized throughout. As per APA recommendations

A Survey on the Color of Interior Design for University Students

OpenAIRE

Takata, Hiroshi

2008-01-01

The purpose of this study is to clarify the actual conditions of the color on interior design for university students. At first, the author carried out the questionnaire survey in order to grasp the characteristics of respondents and their consciousness of interior and color design. Based on the results of the questionnaire survey, the relationship between the characteristics of respondents and their consciousness was studied. Especially, the influence of the respondents' academic grade and t...

Results of the Community Health Applied Research Network (CHARN) National Research Capacity Survey of Community Health Centers.

Science.gov (United States)

Song, Hui; Li, Vivian; Gillespie, Suzanne; Laws, Reesa; Massimino, Stefan; Nelson, Christine; Singal, Robbie; Wagaw, Fikirte; Jester, Michelle; Weir, Rosy Chang

2015-01-01

The mission of the Community Health Applied Research Network (CHARN) is to build capacity to carry out Patient-Centered Outcomes Research at community health centers (CHCs), with the ultimate goal to improve health care for vulnerable populations. The CHARN Needs Assessment Staff Survey investigates CHCs' involvement in research, as well as their need for research training and resources. Results will be used to guide future training. The survey was developed and implemented in partnership with CHARN CHCs. Data were collected across CHARN CHCs. Data analysis and reports were conducted by the CHARN data coordinating center (DCC). Survey results highlighted gaps in staff research training, and these gaps varied by staff role. There is considerable variation in research involvement, partnerships, and focus both within and across CHCs. Development of training programs to increase research capacity should be tailored to address the specific needs and roles of staff involved in research.

Fashion Research at Design Schools

DEFF Research Database (Denmark)

Skjold, Else

2008-01-01

The report “Fashion Research at Design Schools” (2008), which was commissioned by Institute for Fashion and Textiles at Designskolen Kolding,  appoints the potentials and challenges in relation to the ongoing academization of design schools, with a specific focus on fashion research. The key......, interactionistic interviews (Järvinen and Mik-Meyer, 2005) with key persons from the respective research- and fashion departments from eight selected design schools in Holland, England and USA. The analysis of each case is inspired by Edgar E. Schein’s levels of culture (Schein 1994), that aims to pinpoint both...

Progress in XRCS-Survey plant instrumentation and control design for ITER

International Nuclear Information System (INIS)

Varshney, Sanjeev; Jha, Shivakant; Simrock, Stefan; Barnsley, Robin; Martin, Vincent; Mishra, Sapna; Patil, Prabhakant; Patel, Shreyas; Kumar, Vinay

2016-01-01

Highlights: • An identification of the major process functions system compliant to Plant Control Design Handbook (PCDH) has been made for XRCS-Survey plant I&C. • I&C Functional Breakdown Structure (FBS) and Operation Procedure (OP) have been drafted using Enterprise architect (EA). • I&C architecture, interface with ITER networks and Plants, configuration of cubicles are discussed towards nine design review deliverables. - Abstract: A real time, plasma impurity survey system based on X-ray Crystal Spectroscopy (XRCS) has been designed for ITER and will be made available in the set of first plasma diagnostics for measuring impurity ion concentrations and their in-flux. For the purpose of developing a component level design of XRCS-Survey plant I&C system that is compliant to the rules and guidelines defined in the Plant Control Design Handbook (PCDH), firstly an identification of the major process functions has been made. The preliminary plant I&C Functional Breakdown Structure (FBS) and Operation Procedure (OP) have been drafted using a system engineering tool, Enterprise Architect (EA). Conceptual I&C architecture, interface with the ITER networks and other Plants have been discussed along with the basic configuration of I&C cubicles aiming towards nine I&C deliverables for the design review.

Progress in XRCS-Survey plant instrumentation and control design for ITER

Energy Technology Data Exchange (ETDEWEB)

Varshney, Sanjeev, E-mail: sanjeev.varshney@iter-india.org [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, 382 428 (India); Jha, Shivakant [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, 382 428 (India); Simrock, Stefan; Barnsley, Robin; Martin, Vincent [ITER-Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-Lez-Durance, Cedex (France); Mishra, Sapna [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, 382 428 (India); Patil, Prabhakant [ITER-Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-Lez-Durance, Cedex (France); Patel, Shreyas; Kumar, Vinay [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, 382 428 (India)

2016-11-15

Highlights: • An identification of the major process functions system compliant to Plant Control Design Handbook (PCDH) has been made for XRCS-Survey plant I&C. • I&C Functional Breakdown Structure (FBS) and Operation Procedure (OP) have been drafted using Enterprise architect (EA). • I&C architecture, interface with ITER networks and Plants, configuration of cubicles are discussed towards nine design review deliverables. - Abstract: A real time, plasma impurity survey system based on X-ray Crystal Spectroscopy (XRCS) has been designed for ITER and will be made available in the set of first plasma diagnostics for measuring impurity ion concentrations and their in-flux. For the purpose of developing a component level design of XRCS-Survey plant I&C system that is compliant to the rules and guidelines defined in the Plant Control Design Handbook (PCDH), firstly an identification of the major process functions has been made. The preliminary plant I&C Functional Breakdown Structure (FBS) and Operation Procedure (OP) have been drafted using a system engineering tool, Enterprise Architect (EA). Conceptual I&C architecture, interface with the ITER networks and other Plants have been discussed along with the basic configuration of I&C cubicles aiming towards nine I&C deliverables for the design review.

Design Research: Aesthetic Epistemology and Explanatory Knowledge

Directory of Open Access Journals (Sweden)

Peter Murphy

Full Text Available The article explores the “what” and the “how” of design research. It discusses the epistemological assumptions of design and design research—the conception of true knowledge that underpins the quest to advance design knowledge through research. The article also examines the media and methods of doing design research—that is, the “how” of such research. As it developed over the past century, the design field has drawn extensively on three pivotal but often tacitly deployed epistemologies: the Platonic-Aristotelian, the pragmatic, and the postmodern. Platonic epistemology is latent in many commonplace design instruction texts. Pragmatic epistemology underscores the industrial-arts ethos of design. Postmodern epistemologies dominate in university programs—especially graduate and Ph.D. programs. The article considers how these competing epistemologies understand the role of imagination in the act of creation. The article then considers the role of explanation in the carrying out of research in creative design and arts fields. It addresses whether, and to what degree, design research ought to rely on explanatory words as its principal medium of research, or whether it is valid to substitute artifactual creation for intellectual explanation in the research process. Key words: Epistemology, Design, Imagination, Knowledge, Explanation, Practice-based research

Identifying research priorities for public health research to address health inequalities: use of Delphi-like survey methods.

Science.gov (United States)

Turner, S; Ollerhead, E; Cook, A

2017-10-09

In the funding of health research and public health research it is vital that research questions posed are important and that funded research meets a research need or a gap in evidence. Many methods are used in the identification of research priorities, however, these can be resource intensive, costly and logistically challenging. Identifying such research priorities can be particularly challenging for complex public health problems as there is a need to consult a number of experts across disciplines and with a range of expertise. This study investigated the use of Delphi-like survey methods in identifying important research priorities relating to health inequalities and framing tractable research questions for topic areas identified. The study was conducted in two phases, both using Delphi-like survey methods. Firstly, public health professionals with an interest in health inequalities were asked to identify research priorities. Secondly academic researchers were asked to frame tractable research questions relating to the priorities identified. These research priorities identified using Delphi-like survey methods were subsequently compared to those identified using different methods. A total of 52 public health professionals and 21 academics across the United Kingdom agreed to take part. The response rates were high, from public health professionals across three survey rounds (69%, 50% and 40%) and from academics across one round (52%), indicating that participants were receptive to the method and motivated to respond. The themes identified as encompassing the most important research priorities were mental health, healthy environment and health behaviours. Within these themes, the topic areas that emerged most strongly included community interventions for prevention of mental health problems and the food and alcohol environment. Some responses received from academic researchers were (as requested) in the form of tractable research questions, whereas others

Wide Field Infrared Survey Telescope [WFIRST]: telescope design and simulated performance

Science.gov (United States)

Goullioud, R.; Content, D. A.; Kuan, G. M.; Moore, J. D.; Chang, Z.; Sunada, E. T.; Villalvazo, J.; Hawk, J. P.; Armani, N. V.; Johnson, E. L.; Powell, C. A.

2012-09-01

The Wide Field Infrared Survey Telescope (WFIRST) mission concept was ranked first in new space astrophysics missions by the Astro2010 Decadal Survey, incorporating the Joint Dark Energy Mission payload concept and multiple science white papers. This mission is based on a space telescope at L2 studying exoplanets [via gravitational microlensing], probing dark energy, and surveying the near infrared sky. Since the release of the Astro2010 Decadal Survey, the team has been working with the WFIRST Science Definition Team to refine mission and payload concepts. We present the current interim reference mission point design of the payload, based on the use of a 1.3m unobscured aperture three mirror anastigmat form, with focal imaging and slit-less spectroscopy science channels. We also present the first results of Structural/Thermal/Optical performance modeling of the telescope point design.

A Survey of Campus Coordinators of Undergraduate Research Programs

Science.gov (United States)

Hensley, Merinda Kaye; Shreeves, Sarah L.; Davis-Kahl, Stephanie

2015-01-01

Interest in supporting undergraduate research programs continues to grow within academic librarianship. This article presents how undergraduate research program coordinators perceive and value library support of their programs. Undergraduate research coordinators from a variety of institutions were surveyed on which elements of libraries and…

Communicating Qualitative Research Study Designs to Research Ethics Review Boards

Science.gov (United States)

Ells, Carolyn

2011-01-01

Researchers using qualitative methodologies appear to be particularly prone to having their study designs called into question by research ethics or funding agency review committees. In this paper, the author considers the issue of communicating qualitative research study designs in the context of institutional research ethics review and offers…

Addressing Research Design Problem in Mixed Methods Research

Science.gov (United States)

Alavi, Hamed; Hąbek, Patrycja

2016-03-01

Alongside other disciplines in social sciences, management researchers use mixed methods research more and more in conduct of their scientific investigations. Mixed methods approach can also be used in the field of production engineering. In comparison with traditional quantitative and qualitative research methods, reasons behind increasing popularity of mixed research method in management science can be traced in different factors. First of all, any particular discipline in management can be theoretically related to it. Second is that concurrent approach of mixed research method to inductive and deductive research logic provides researchers with opportunity to generate theory and test hypothesis in one study simultaneously. In addition, it provides a better justification for chosen method of investigation and higher validity for obtained answers to research questions. Despite increasing popularity of mixed research methods among management scholars, there is still need for a comprehensive approach to research design typology and process in mixed research method from the perspective of management science. The authors in this paper try to explain fundamental principles of mixed research method, its typology and different steps in its design process.

A SURVEY AND BIBLIOGRAPHY OF CONTEMPORARY RESEARCH ON POLITICAL LEARNING AND SOCIALIZATION.

Science.gov (United States)

DENNIS, JACK

A GENERAL SURVEY WAS MADE OF RESEARCH AND LITERATURE IN THE FIELD OF POLITICAL LEARNING AND SOCIALIZATION, AND A BIBLIOGRAPHY WAS PREPARED. THE SURVEY WAS MADE TO PROVIDE AN INDICATION OF THE MAIN CURRENTS OF STUDY OF CHILDREN'S LEARNING OF POLITICAL CONCEPTS. THE SURVEY INCLUDED MAJOR SUBSTANTIVE PROBLEMS OF POLITICAL SOCIALIZATION RESEARCH--(1)…

Design Considerations: Falcon M Dwarf Habitable Exoplanet Survey

Science.gov (United States)

Polsgrove, Daniel; Novotny, Steven; Della-Rose, Devin J.; Chun, Francis; Tippets, Roger; O'Shea, Patrick; Miller, Matthew

2016-01-01

The Falcon Telescope Network (FTN) is an assemblage of twelve automated 20-inch telescopes positioned around the globe, controlled from the Cadet Space Operations Center (CSOC) at the US Air Force Academy (USAFA) in Colorado Springs, Colorado. Five of the 12 sites are currently installed, with full operational capability expected by the end of 2016. Though optimized for studying near-earth objects to accomplish its primary mission of Space Situational Awareness (SSA), the Falcon telescopes are in many ways similar to those used by ongoing and planned exoplanet transit surveys targeting individual M dwarf stars (e.g., MEarth, APACHE, SPECULOOS). The network's worldwide geographic distribution provides additional potential advantages. We have performed analytical and empirical studies exploring the viability of employing the FTN for a future survey of nearby late-type M dwarfs tailored to detect transits of 1-2REarth exoplanets in habitable-zone orbits . We present empirical results on photometric precision derived from data collected with multiple Falcon telescopes on a set of nearby (survey design parameters is also described, including an analysis of site-specific weather data, anticipated telescope time allocation and the percentage of nearby M dwarfs with sufficient check stars within the Falcons' 11' x 11' field-of-view required to perform effective differential photometry. The results of this ongoing effort will inform the likelihood of discovering one (or more) habitable-zone exoplanets given current occurrence rate estimates over a nominal five-year campaign, and will dictate specific survey design features in preparation for initiating project execution when the FTN begins full-scale automated operations.

Environmental survey at Lucas Heights Research Laboratories, 1993

International Nuclear Information System (INIS)

Hoffmann, E.L.; Looz, T.

1995-04-01

Results are presented of the environmental survey conducted in the neighbourhood of the Lucas Heights Research Laboratories during 1993. No activity which could have originated from these laboratories was found in samples collected from possible human food chains. All low-level liquid and gaseous waste discharges were within authorised limits. The maximum possible annual dose to the general public from airborne discharges during this period is estimated to be less than 0.01 mSv, which is one per cent of the dose limit for long term exposure that is recommended by the National Health and Medical Research Council. A list of previous environmental survey reports is attached. 22 refs., 21 tabs., 4 figs

Evaluation in Design-Oriented Research

NARCIS (Netherlands)

Verschuren, P.J.M.; Hartog, R.J.M.

2005-01-01

Design has been recognized for a long time both as art and as science. In the sixties of the previous century design-oriented research began to draw the attention of scientific researchers and methodologists, not only in technical engineering but also in the social sciences. However, a rather

Fashion Research at Design Schools

DEFF Research Database (Denmark)

Skjold, Else

2008-01-01

on fashion education and fashion research, that are “taken for granted” in the institutional culture of each case. Because of the diversity between the cases, a cultural-oriented comparison has been made, where every case is perceived as idiographically unique (Thyge Winther-Jensen 2004). Descriptions......The report “Fashion Research at Design Schools” (2008), which was commissioned by Institute for Fashion and Textiles at Designskolen Kolding,  appoints the potentials and challenges in relation to the ongoing academization of design schools, with a specific focus on fashion research. The key...... research question is: “What kind of fashion design education is Designskolen Kolding aiming to offer in the future, what kind of skills will the students need in their future work place, the fashion industry, and can research work as a potential in this process?”   The study is based on qualitative...

Research oriented projects on design themese

DEFF Research Database (Denmark)

Tollestrup, Christian; Eriksen, Kaare; Ovesen, Nis

2011-01-01

How can design students do research-oriented projects about design themes? At the 3rd semester at the Industrial Design Master Program at Aalborg University this is done by taking research oriented learning objectives on design theories and methods and combining them with experimental case studie...... and professional self-reflection amongst students are improved....

SEDS: THE SPITZER EXTENDED DEEP SURVEY. SURVEY DESIGN, PHOTOMETRY, AND DEEP IRAC SOURCE COUNTS

International Nuclear Information System (INIS)

Ashby, M. L. N.; Willner, S. P.; Fazio, G. G.; Huang, J.-S.; Hernquist, L.; Hora, J. L.; Arendt, R.; Barmby, P.; Barro, G.; Faber, S.; Guhathakurta, P.; Bell, E. F.; Bouwens, R.; Cattaneo, A.; Croton, D.; Davé, R.; Dunlop, J. S.; Egami, E.; Finlator, K.; Grogin, N. A.

2013-01-01

The Spitzer Extended Deep Survey (SEDS) is a very deep infrared survey within five well-known extragalactic science fields: the UKIDSS Ultra-Deep Survey, the Extended Chandra Deep Field South, COSMOS, the Hubble Deep Field North, and the Extended Groth Strip. SEDS covers a total area of 1.46 deg 2 to a depth of 26 AB mag (3σ) in both of the warm Infrared Array Camera (IRAC) bands at 3.6 and 4.5 μm. Because of its uniform depth of coverage in so many widely-separated fields, SEDS is subject to roughly 25% smaller errors due to cosmic variance than a single-field survey of the same size. SEDS was designed to detect and characterize galaxies from intermediate to high redshifts (z = 2-7) with a built-in means of assessing the impact of cosmic variance on the individual fields. Because the full SEDS depth was accumulated in at least three separate visits to each field, typically with six-month intervals between visits, SEDS also furnishes an opportunity to assess the infrared variability of faint objects. This paper describes the SEDS survey design, processing, and publicly-available data products. Deep IRAC counts for the more than 300,000 galaxies detected by SEDS are consistent with models based on known galaxy populations. Discrete IRAC sources contribute 5.6 ± 1.0 and 4.4 ± 0.8 nW m –2 sr –1 at 3.6 and 4.5 μm to the diffuse cosmic infrared background (CIB). IRAC sources cannot contribute more than half of the total CIB flux estimated from DIRBE data. Barring an unexpected error in the DIRBE flux estimates, half the CIB flux must therefore come from a diffuse component.

Designing and conducting health surveys: a comprehensive guide

National Research Council Canada - National Science Library

Aday, Lu Ann; Cornelius, Llewellyn Joseph

2006-01-01

... and Carrying Out the Survey 311 14 Preparing the Data for Analysis 340 15 Planning and Implementing the Analysis of the Data 360 16 Writing the Research Report 391 Resource A: Personal Interview Sur...

Game design research: an introduction to theory & practice

OpenAIRE

Lankoski, Petri; Holopainen, Jussi

2017-01-01

Design research is an active academic field covering disciplines such as architecture, graphic, product, service, interaction, and systems design. Design research aims to understand not only the designed end products but also how design as an activity unfolds. The book demonstrates different approaches to design research in game design research.

Injury survey of a non-traditional 'soft-edged' trampoline designed to lower equipment hazards.

Science.gov (United States)

Eager, David B; Scarrott, Carl; Nixon, Jim; Alexander, Keith

2013-01-01

In Australia trampolines contribute one quarter of all childhood play equipment injuries. The objective of this study was to gather and evaluate injury data from a non-traditional, 'soft-edged', consumer trampoline, where the design aimed to minimise injuries from the equipment and from falling off. The manufacturer of the non-traditional trampoline provided the University of Technology Sydney with their Australian customer database. The study involved surveys in Queensland and New South Wales, between May 2007 and March 2010. Initially injury data was gathered by a phone interview pilot study, then in the full study, through an email survey. The 3817 respondents were the carers of child users of the 'soft-edge' trampolines. Responses were compared with Australian and US emergency department data. In both countries the proportion of injuries caused by the equipment and falling off was compared with the proportion caused by the jumpers to themselves or each other. The comparisons showed a significantly lower proportion resulted from falling-off or hitting the equipment for this design when compared to traditional trampolines, both in Australia and the US. This research concludes that equipment-induced and falling-off injuries, the more severe injuries on traditional trampolines, can be significantly reduced with appropriate trampoline design.

Design research and industrial applicability

DEFF Research Database (Denmark)

Andreasen, Mogens Myrup

1997-01-01

Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry.......Imprinted paper (copies of overheads in English) on the nature of design research, the transformation process for industrial utilization and the challenges of ENDREA from industry....

How Design-based Research, Action Research and Interaction Design Contributes to the Development of Designs for Learning

DEFF Research Database (Denmark)

Majgaard, Gunver; Misfeldt, Morten; Nielsen, Jacob

2011-01-01

This article explores how action research, design based research and interaction design can be combined and used in the development of educational robotic tools. Our case study is the development of Number Blocks and it combines physical interaction, learning, and immediate feedback. Number Blocks...... supports the children's understanding of place value in the sense that it allows them to experiment with creating large numbers. The development was done in collaboration with a class of 7-8 year old children and their mathematics teacher. The article argues that elements from different research methods...... allowed a structured approach to projects that combines educational research and innovation of new learning technologies. Key elements of this approach is acknowledging the users input, developing a theoretical pre-analysis and using an iterative approach....

Board and card games for studying electrochemistry: Preliminary research and early design

Science.gov (United States)

Kurniawan, Rizmahardian Ashari; Kurniasih, Dedeh; Jukardi

2017-12-01

Games in the chemistry classroom can offer engaging and fun alternative method of learning. However, only a few games in chemistry, especially in electrochemistry subject are available commercially. In this research, we developed board and card games for studying electrochemistry. We surveyed chemistry teacher and students from 10 different senior high schools in Pontianak to decide content and characteristic of the game. We have designed the game that can be played by four students or four group of students, either as a specific instruction in the classroom or as a supplementary learning material. The game was designed to help students understanding the voltaic cell configuration and its voltaic potential.

[Methodological design of the National Health and Nutrition Survey 2016].

Science.gov (United States)

Romero-Martínez, Martín; Shamah-Levy, Teresa; Cuevas-Nasu, Lucía; Gómez-Humarán, Ignacio Méndez; Gaona-Pineda, Elsa Berenice; Gómez-Acosta, Luz María; Rivera-Dommarco, Juan Ángel; Hernández-Ávila, Mauricio

2017-01-01

Describe the design methodology of the halfway health and nutrition national survey (Ensanut-MC) 2016. The Ensanut-MC is a national probabilistic survey whose objective population are the inhabitants of private households in Mexico. The sample size was determined to make inferences on the urban and rural areas in four regions. Describes main design elements: target population, topics of study, sampling procedure, measurement procedure and logistics organization. A final sample of 9 479 completed household interviews, and a sample of 16 591 individual interviews. The response rate for households was 77.9%, and the response rate for individuals was 91.9%. The Ensanut-MC probabilistic design allows valid statistical inferences about interest parameters for Mexico´s public health and nutrition, specifically on overweight, obesity and diabetes mellitus. Updated information also supports the monitoring, updating and formulation of new policies and priority programs.

UX Design Innovation

DEFF Research Database (Denmark)

Dove, Graham; Halskov, Kim; Forlizzi, Jodi

2017-01-01

be because it is a new and difficult design material. To better understand why we have witnessed little design innovation, we conducted a survey of current UX practitioners with regards to how new ML services are envisioned and developed in UX practice. Our survey probed on how ML may or may not have been...... a part of their UX design education, on how they work to create new things with developers, and on the challenges they have faced working with this material. We use the findings from this survey and our review of related literature to present a series of challenges for UX and interaction design research...... and education. Finally, we discuss areas where new research and new curriculum might help our community unlock the power of design thinking to re-imagine what ML might be and might do....

Evaluation of Mechanisms to Improve Performance of Mobile Phone Surveys in Low- and Middle-Income Countries: Research Protocol.

Science.gov (United States)

Gibson, Dustin G; Pariyo, George William; Wosu, Adaeze C; Greenleaf, Abigail R; Ali, Joseph; Ahmed, Saifuddin; Labrique, Alain B; Islam, Khaleda; Masanja, Honorati; Rutebemberwa, Elizeus; Hyder, Adnan A

2017-05-05

Mobile phone ownership and access have increased rapidly across low- and middle-income countries (LMICs) within the last decade. Concomitantly, LMICs are experiencing demographic and epidemiologic transitions, where non-communicable diseases (NCDs) are increasingly becoming leading causes of morbidity and mortality. Mobile phone surveys could aid data collection for prevention and control of these NCDs but limited evidence of their feasibility exists. The objective of this paper is to describe a series of sub-studies aimed at optimizing the delivery of interactive voice response (IVR) and computer-assisted telephone interviews (CATI) for NCD risk factor data collection in LMICs. These sub-studies are designed to assess the effect of factors such as airtime incentive timing, amount, and structure, survey introduction characteristics, different sampling frames, and survey modality on key survey metrics, such as survey response, completion, and attrition rates. In a series of sub-studies, participants will be randomly assigned to receive different airtime incentive amounts (eg, 10 minutes of airtime versus 20 minutes of airtime), different incentive delivery timings (airtime delivered before survey begins versus delivery upon completion of survey), different survey introductions (informational versus motivational), different narrative voices (male versus female), and different sampling frames (random digit dialing versus mobile network operator-provided numbers) to examine which study arms will yield the highest response and completion rates. Furthermore, response and completion rates and the inter-modal reliability of the IVR and CATI delivery methods will be compared. Research activities are expected to be completed in Bangladesh, Tanzania, and Uganda in 2017. This is one of the first studies to examine the feasibility of using IVR and CATI for systematic collection of NCD risk factor information in LMICs. Our findings will inform the future design and

Protecting the privacy of family members in survey and pedigree research.

Science.gov (United States)

Botkin, J

2001-01-10

The recent controversy at Virginia Commonwealth University involving research ethics raises important and complex issues in survey and pedigree research. The primary questions are whether family members of survey respondents themselves become subjects of the project and if they are subjects whether informed consent must be obtained for investigators to retain private information on these individuals. This article provides an analysis of the ethical issues and regulatory standards involved in this debate for consideration by investigators and institutional review boards. The analysis suggests that strong protections for the rights and welfare of subjects and their family members can be incorporated into survey and pedigree research protocols without hindering projects with extensive consent requirements.

A Survey of Applications and Research in Integrated Design Systems Technology

Science.gov (United States)

1998-01-01

The initial part of the study was begun with a combination of literature searches, World Wide Web searches, and contacts with individuals and companies who were known to members of our team to have an interest in topics that seemed to be related to our study. There is a long list of such topics, such as concurrent engineering, design for manufacture, life-cycle engineering, systems engineering, systems integration, systems design, design systems, integrated product and process approaches, enterprise integration, integrated product realization, and similar terms. These all capture, at least in part, the flavor of what we describe here as integrated design systems. An inhibiting factor in this inquiry was the absence of agreed terminology for the study of integrated design systems. It is common for the term to be applied to what are essentially augmented Computer-Aided Design (CAD) systems, which are integrated only to the extent that agreements have been reached to attach proprietary extensions to proprietary CAD programs. It is also common for some to use the term integrated design systems to mean a system that applies only, or mainly, to the design phase of a product life cycle. It is likewise common for many of the terms listed earlier to be used as synonyms for integrated design systems. We tried to avoid this ambiguity by adopting the definition of integrated design systems that is implied in the introductory notes that we provided to our contacts, cited earlier. We thus arrived at this definition: Integrated Design Systems refers to the integration of the different tools and processes that comprise the engineering, of complex systems. It takes a broad view of the engineering of systems, to include consideration of the entire product realization process and the product life cycle. An important aspect of integrated design systems is the extent to which they integrate existing, "islands of automation" into a comprehensive design and product realization

Implementing an online pharmaceutical service using design science research.

Science.gov (United States)

Lapão, Luís Velez; da Silva, Miguel Mira; Gregório, João

2017-03-27

The rising prevalence of chronic diseases is pressing health systems to introduce reforms. Primary healthcare and multidisciplinary models have been suggested as approaches to deal with this challenge, with new roles for nurses and pharmacists being advocated. More recently, implementing healthcare based on information systems and technologies (e.g. eHealth) has been proposed as a way to improve health services. However, implementing online pharmaceutical services, including their adoption by pharmacists and patients, is still an open research question. In this paper we present ePharmacare, a new online pharmaceutical service implemented using Design Science Research. The Design Science Research Methodology (DSRM) was chosen to implement this online service for chronic diseases management. In the paper, DSRM's different activities are explained, from the definition of the problem to the evaluation of the artifact. During the design and development activities, surveys, observations, focus groups, and eye-tracking glasses were used to validate pharmacists' and patients' requirements. During the demonstration and evaluation activities the new service was used with real-world pharmacists and patients. The results show the contribution of DSRM in the implementation of online services for pharmacies. We found that pharmacists spend only 50% of their time interacting with patients, uncovering a clear opportunity to implement online pharmaceutical care services. On the other hand, patients that regularly visit the same pharmacy recognize the value in patient follow-up demanding to use channels such as the Internet for their pharmacy interactions. Limitations were identified regarding the high workload of pharmacists, but particularly their lack of know-how and experience in dealing with information systems (IST) for the provision of pharmaceutical services. This paper summarizes a research project in which an online pharmaceutical service was proposed, designed, developed

Design and operation of the national home health aide survey: 2007-2008.

Science.gov (United States)

Bercovitz, Anita; Moss, Abigail J; Sengupta, Manisha; Harris-Kojetin, Lauren D; Squillace, Marie R; Emily, Rosenoff; Branden, Laura

2010-03-01

This report provides an overview of the National Home Health Aide Survey (NHHAS), the first national probability survey of home health aides. NHHAS was designed to provide national estimates of home health aides who provided assistance in activities of daily living (ADLs) and were directly employed by agencies that provide home health and/or hospice care. This report discusses the need for and objectives of the survey, the design process, the survey methods, and data availability. METHODS NHHAS, a multistage probability sample survey, was conducted as a supplement to the 2007 National Home and Hospice Care Survey (NHHCS). Agencies providing home health and/or hospice care were sampled, and then aides employed by these agencies were sampled and interviewed by telephone. Survey topics included recruitment, training, job history, family life, client relations, work-related injuries, and demographics. NHHAS was virtually identical to the 2004 National Nursing Assistant Survey of certified nursing assistants employed in sampled nursing homes with minor changes to account for differences in workplace environment and responsibilities. RESULTS From September 2007 to April 2008, interviews were completed with 3,416 aides. A public-use data file that contains the interview responses, sampling weights, and design variables is available. The NHHAS overall response rate weighted by the inverse of the probability of selection was 41 percent. This rate is the product of the weighted first-stage agency response rate of 57 percent (i.e., weighted response rate of 59 percent for agency participation in NHHCS times the weighted response rate of 97 percent for agencies participating in NHHCS that also participated in NHHAS) and the weighted second-stage aide response rate of 72 percent to NHHAS.

Applied statistical designs for the researcher

CERN Document Server

Paulson, Daryl S

2003-01-01

Research and Statistics Basic Review of Parametric Statistics Exploratory Data Analysis Two Sample Tests Completely Randomized One-Factor Analysis of Variance One and Two Restrictions on Randomization Completely Randomized Two-Factor Factorial Designs Two-Factor Factorial Completely Randomized Blocked Designs Useful Small Scale Pilot Designs Nested Statistical Designs Linear Regression Nonparametric Statistics Introduction to Research Synthesis and "Meta-Analysis" and Conclusory Remarks References Index.

Designing interaction, voice, and inclusion in AAC research.

Science.gov (United States)

Pullin, Graham; Treviranus, Jutta; Patel, Rupal; Higginbotham, Jeff

2017-09-01

The ISAAC 2016 Research Symposium included a Design Stream that examined timely issues across augmentative and alternative communication (AAC), framed in terms of designing interaction, designing voice, and designing inclusion. Each is a complex term with multiple meanings; together they represent challenging yet important frontiers of AAC research. The Design Stream was conceived by the four authors, researchers who have been exploring AAC and disability-related design throughout their careers, brought together by a shared conviction that designing for communication implies more than ensuring access to words and utterances. Each of these presenters came to AAC from a different background: interaction design, inclusive design, speech science, and social science. The resulting discussion among 24 symposium participants included controversies about the role of technology, tensions about independence and interdependence, and a provocation about taste. The paper concludes by proposing new directions for AAC research: (a) new interdisciplinary research could combine scientific and design research methods, as distant yet complementary as microanalysis and interaction design, (b) new research tools could seed accessible and engaging contextual research into voice within a social model of disability, and (c) new open research networks could support inclusive, international and interdisciplinary research.

The U.S. Geological Survey cartographic and geographic information science research activities 2006-2010

Science.gov (United States)

Usery, E. Lynn

2011-01-01

The U.S. Geological Survey (USGS) produces geospatial databases and topographic maps for the United States of America. A part of that mission includes conducting research in geographic information science (GIScience) and cartography to support mapping and improve the design, quality, delivery, and use of geospatial data and topographic maps. The Center of Excellence for Geospatial Information Science (CEGIS) was established by the USGS in January 2006 as a part of the National Geospatial Program Office. CEGIS (http://cegis.usgs.gov) evolved from a team of cartographic researchers at the Mid-Continent Mapping Center. The team became known as the Cartographic Research group and was supported by the Cooperative Topographic Mapping, Geographic Analysis and Monitoring, and Land Remote Sensing programs of the Geography Discipline of the USGS from 1999-2005. In 2006, the Cartographic Research group and its projects (http://carto-research.er.usgs.gov/) became the core of CEGIS staff and research. In 2006, CEGIS research became focused on The National Map (http://nationalmap.gov).

Motivation in Business Survey Response Behavior : Influencing motivation to improve survey outcome

NARCIS (Netherlands)

Torres van Grinsven, V.|info:eu-repo/dai/nl/355608510

2015-01-01

In this dissertation we show theoretical and empirical insights into the concept of motivation in the context of the business and organizational survey task. The research has led to a number of recommendations on how to improve organizational survey and communication design to enhance motivation and

Contribution of formative research to design an environmental program for obesity prevention in schools in Mexico City.

Science.gov (United States)

Bonvecchio, Anabelle; Théodore, Florence L; Safdie, Margarita; Duque, Tiffany; Villanueva, María Ángeles; Torres, Catalina; Rivera, Juan

2014-01-01

This paper describes the methods and key findings of formative research conducted to design a school-based program for obesity prevention. Formative research was based on the ecological model and the principles of social marketing. A mixed method approach was used. Qualitative (direct observation, indepth interviews, focus group discussions and photo-voice) and quantitative (closed ended surveys, checklists, anthropometry) methods were employed. Formative research key findings, including barriers by levels of the ecological model, were used for designing a program including environmental strategies to discourage the consumption of energy dense foods and sugar beverages. Formative research was fundamental to developing a context specific obesity prevention program in schools that seeks environment modification and behavior change.

Rock-Mechanics Research. A Survey of United States Research to 1965, with a Partial Survey of Canadian Universities.

Science.gov (United States)

National Academy of Sciences - National Research Council, Washington, DC.

The results of a survey, conducted by the Committee on Rock Mechanics, to determine the status of training and research in rock mechanics in presented in this publication. In 1964 and 1965 information was gathered by questionnaires sent to industries, selected federal agencies, and universities in both the United States and Canada. Results are…

Intermediate/Advanced Research Design and Statistics

Science.gov (United States)

Ploutz-Snyder, Robert

2009-01-01

The purpose of this module is To provide Institutional Researchers (IRs) with an understanding of the principles of advanced research design and the intermediate/advanced statistical procedures consistent with such designs

Conducting Educational Design Research

Science.gov (United States)

McKenney, Susan; Reeves, Thomas

2012-01-01

Educational design research blends scientific investigation with systematic development and implementation of solutions to educational problems. Empirical investigation is conducted in real learning settings--not laboratories--to craft usable and effective solutions. At the same time, the research is carefully structured to produce theoretical…

Mode Equivalence of Health Indicators Between Data Collection Modes and Mixed-Mode Survey Designs in Population-Based Health Interview Surveys for Children and Adolescents: Methodological Study.

Science.gov (United States)

Mauz, Elvira; Hoffmann, Robert; Houben, Robin; Krause, Laura; Kamtsiuris, Panagiotis; Gößwald, Antje

2018-03-05

children and adolescents were compared by survey design and data collection mode by calculating predictive margins from regression models. There were no statistically significant differences in sociodemographic characteristics or health indicators between the single-mode control group and any of the mixed-mode survey designs. Differences in sociodemographic characteristics between SAQ-Web and SAQ-paper were found. Web respondents were more likely to be male, have higher levels of education, and higher household income compared with paper respondents. After adjusting for sociodemographic characteristics, only one of the 38 analyzed health indicators showed different prevalence rates between the data collection modes, with a higher prevalence rate for lifetime alcohol consumption among the online-responding adolescents (Pdesign with Web-based and paper questionnaires. ©Elvira Mauz, Robert Hoffmann, Robin Houben, Laura Krause, Panagiotis Kamtsiuris, Antje Gößwald. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 05.03.2018.

Experimental design research approaches, perspectives, applications

CERN Document Server

Stanković, Tino; Štorga, Mario

2016-01-01

This book presents a new, multidisciplinary perspective on and paradigm for integrative experimental design research. It addresses various perspectives on methods, analysis and overall research approach, and how they can be synthesized to advance understanding of design. It explores the foundations of experimental approaches and their utility in this domain, and brings together analytical approaches to promote an integrated understanding. The book also investigates where these approaches lead to and how they link design research more fully with other disciplines (e.g. psychology, cognition, sociology, computer science, management). Above all, the book emphasizes the integrative nature of design research in terms of the methods, theories, and units of study—from the individual to the organizational level. Although this approach offers many advantages, it has inherently led to a situation in current research practice where methods are diverging and integration between individual, team and organizational under...

The Role of Hypothesis in Constructive Design Research

DEFF Research Database (Denmark)

Bang, Anne Louise; Krogh, Peter; Ludvigsen, Martin

2012-01-01

It is, today, widely appreciated that Research-through-Design – or Constructive Design Research as we will call it in this paper – allows for designers to produce knowledge based on the skills and capacities of the design field itself. However, most of the research fails to bridge the gap between...... the general notions of constructive design research and the detailed research activities of the field. We therefore suggest bridging this methodological gap in the academic discussion with what we have ended up calling the “entrance level of constructive design research”. As a step towards to a more nuanced...... and solid perspective on how to keep constructive design research on track, this paper offers a model for understanding the role of hypothesis in constructive design research. The model allows for understanding the hypothesis’s relation to research motivation, questions, experiments, evaluation...

Recruiting and retaining youth and young adults: challenges and opportunities in survey research for tobacco control.

Science.gov (United States)

Cantrell, Jennifer; Hair, Elizabeth C; Smith, Alexandria; Bennett, Morgane; Rath, Jessica Miller; Thomas, Randall K; Fahimi, Mansour; Dennis, J Michael; Vallone, Donna

2018-03-01

Evaluation studies of population-based tobacco control interventions often rely on large-scale survey data from numerous respondents across many geographic areas to provide evidence of their effectiveness. Significant challenges for survey research have emerged with the evolving communications landscape, particularly for surveying hard-to-reach populations such as youth and young adults. This study combines the comprehensive coverage of an address-based sampling (ABS) frame with the timeliness of online data collection to develop a nationally representative longitudinal cohort of young people aged 15-21. We constructed an ABS frame, partially supplemented with auxiliary data, to recruit this hard-to-reach sample. Branded and tested mail-based recruitment materials were designed to bring respondents online for screening, consent and surveying. Once enrolled, respondents completed online surveys every 6 months via computer, tablet or smartphone. Numerous strategies were utilized to enhance retention and representativeness RESULTS: Results detail sample performance, representativeness and retention rates as well as device utilization trends for survey completion among youth and young adult respondents. Panel development efforts resulted in a large, nationally representative sample with high retention rates. This study is among the first to employ this hybrid ABS-to-online methodology to recruit and retain youth and young adults in a probability-based online cohort panel. The approach is particularly valuable for conducting research among younger populations as it capitalizes on their increasing access to and comfort with digital communication. We discuss challenges and opportunities of panel recruitment and retention methods in an effort to provide valuable information for tobacco control researchers seeking to obtain representative, population-based samples of youth and young adults in the U.S. as well as across the globe. © Article author(s) (or their employer

Library Research Support in Queensland: A Survey

Science.gov (United States)

Richardson, Joanna; Nolan-Brown, Therese; Loria, Pat; Bradbury, Stephanie

2012-01-01

University libraries worldwide are reconceptualising the ways in which they support the research agenda in their respective institutions. This paper is based on a survey completed by member libraries of the Queensland University Libraries Office of Cooperation (QULOC), the findings of which may be informative for other university libraries. After…

1990 National Compensation Survey of Research and Development Scientists and Engineers

Energy Technology Data Exchange (ETDEWEB)

1990-11-01

This report presents the results of the fourth in a new series of surveys of compensation and benefits for research and development (R D) scientists and engineers (S Es). The 1990 Survey represents the largest nationwide database of its kind, covering 104 establishments which provided data on almost 41,000 degreed researchers in the hard'' sciences. The fundamental nature of the survey has not changed: the focus is still on medium- and large-sized establishments which employ at least 100 degreed S Es in R D. The 1990 Survey contains data which cover about 18% of all establishments eligible to participate, encompassing approximately 18% of all eligible employees. As in the last three years, the survey sample constitutes a fairly good representation of the entire population of eligible establishments on the basis of business sector, geographic location, and size. Maturity-based analyses of salaries for some 34,000 nonsupervisory researchers are provided, as are job content-based analyses of more than 27,000 individual contributors and almost 5000 first level supervisors and division directors. Compensation policies and practices data are provided for 102 establishments, and benefits plans for 62 establishments are analyzed.

Verification of radioactive contamination surveys for practical use in biological research centres

International Nuclear Information System (INIS)

Macias, M.T.; Requejo, C.; Ruiz, M.; Pina, R.

2006-01-01

Unsealed sources are commonly used in science research laboratories. Their manipulation may imply a radioactive contamination hazard. Therefore, adequate and sensitive survey meters must be available, and must have an effective and accurate response to intensity and type of radiation emitted by the used radionuclides to identify and quantify the possible contamination and then be able to avoid any associated or unwanted consequences that may arise. Periodic surveys are performed to show control, any time, any place radioactive contamination is suspected, and to ensure radioisotopes are being used safely. The immediate work areas must be often checked with portable survey monitors, including the entire lab and particularly bench tops, personnel protective equipment or solely designated equipment for isotope use (micro-fuges, water baths, incubators). These are carried out with portable survey instruments like Geiger-Muller tubes, proportional counters and scintillation detectors that provide direct or indirect measurements capabilities. The Radiation Safety Office (R.S.O.) as well as the radioactive compounds working laboratories at the Instituto de Inv. Biomedicas 'A. Sols' (Madrid-Spain) are provided with an adequate radiation measurement instrument. But, before a portable survey instrument is used, several quality checks should be made (batteries, calibration sticker), and the instrument response should be tested with a check source. This paper aims at determining, with a R.S.O. procedure, these surveys working parameters -detection efficiency, calibration factors and minimum detectable activities-, using reference checking sources ( 14 C, 36 Cl, and 90 Sr/ 90 Y) with known radioactivity covering the energy range of beta emitting isotopes used in biological research. No gamma portable monitors have been tested for the R.S.O. has no gamma checking sources. Therefore, 58 beta monitors were tested, obtaining t he efficiency values, the calibration factors (Bq cm-2 s

Chapter 12: Survey Design and Implementation for Estimating Gross Savings Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

Energy Technology Data Exchange (ETDEWEB)

Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baumgartner, Robert [Tetra Tech, Madison, WI (United States)

2017-10-05

This chapter presents an overview of best practices for designing and executing survey research to estimate gross energy savings in energy efficiency evaluations. A detailed description of the specific techniques and strategies for designing questions, implementing a survey, and analyzing and reporting the survey procedures and results is beyond the scope of this chapter. So for each topic covered below, readers are encouraged to consult articles and books cited in References, as well as other sources that cover the specific topics in greater depth. This chapter focuses on the use of survey methods to collect data for estimating gross savings from energy efficiency programs.

Aseismatic design and safety of nuclear power generation facilities. Research in Central Research Institute of Electric Power Industry

International Nuclear Information System (INIS)

1995-01-01

In order to contribute to the aseismatic design of nuclear power generation facilities, this Research Institute has carried out the observation on the site of buildings in Matsushiro earthquake, the experiment on a large vibration table, the vibration experiment on actual buildings and so on, thus made clear the method of evaluating the dynamic model of buildings and foundation grounds. Also it cooperated in the determination of input earthquake motion which is important for aseismatic design by carrying out the evaluation of the activity of faults the observation of strong earthquakes, and the elucidation and evaluation of the characteristics of earthquake motion. It has made the standard for evaluating the fault activity and the stability in earthquakes of the foundation and surrounding grounds of power stations. The development of new underground location technology, the location on Quaternary grounds and the location on the sea, and the research on developing the aseismatic construction of FBRs are in progress. The survey and evaluation of fault activities, the evaluation of earthquake input, the limit state design of important outdoor structures, the new location technology for nuclear power stations, and the development of the buckling and base isolation design of FBRs are reported. (K.I.)

Research Suggestions in the Design of a Global Graduate Business Program Delivered by Online Learning

Science.gov (United States)

Puderbaugh, Amy

2015-01-01

The purpose of this paper was to examine the unique areas of concern when establishing an eLearning program in the field of global business. A survey of eLearning and a global management subject matter appears. This paper identifies potential challenges in program design and raises practical concerns for future research. [For the full proceedings,…

Design tradeoffs in long-term research for stream salamanders

Science.gov (United States)

Brand, Adrianne B,; Grant, Evan H. Campbell

2017-01-01

Long-term research programs can benefit from early and periodic evaluation of their ability to meet stated objectives. In particular, consideration of the spatial allocation of effort is key. We sampled 4 species of stream salamanders intensively for 2 years (2010–2011) in the Chesapeake and Ohio Canal National Historical Park, Maryland, USA to evaluate alternative distributions of sampling locations within stream networks, and then evaluated via simulation the ability of multiple survey designs to detect declines in occupancy and to estimate dynamic parameters (colonization, extinction) over 5 years for 2 species. We expected that fine-scale microhabitat variables (e.g., cobble, detritus) would be the strongest determinants of occupancy for each of the 4 species; however, we found greater support for all species for models including variables describing position within the stream network, stream size, or stream microhabitat. A monitoring design focused on headwater sections had greater power to detect changes in occupancy and the dynamic parameters in each of 3 scenarios for the dusky salamander (Desmognathus fuscus) and red salamander (Pseudotriton ruber). Results for transect length were more variable, but across all species and scenarios, 25-m transects are most suitable as a balance between maximizing detection probability and describing colonization and extinction. These results inform sampling design and provide a general framework for setting appropriate goals, effort, and duration in the initial planning stages of research programs on stream salamanders in the eastern United States.

FY 1992 Report on results of the survey/research project commissioned by Sunshine Project. Surveys on hydrogen-fired turbines; 1992 nendo suiso nensho turbine no chosa seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-03-01

Summarized herein are results of comprehensive surveys on hydrogen energy supply/utilization systems, centered by hydrogen-fired turbines for power generation. The surveyed items include hydrogen energy supply/utilization systems on an international scale, current state of power generation techniques and utilization of hydrogen, hydrogen-fired turbines for power generation, materials techniques for hydrogen-fired turbines, studies on and evaluation of economic viability of each system, expected effects, and problems involved in development. The surveys on the hydrogen production techniques pick up electrolysis with a solid polymer electrolyte as a promising candidate, and extract the scaling-up techniques, improvement of membrane durability, etc. as the research themes. The surveys on the hydrogen storage/transportation techniques indicate that hydrogen can be carried by a chemical medium for transportation/storage at normal temperature and pressure, for which the problems associated with medium loss and safety must be studied, and that the research themes for hydrogen-occluding alloys should include increasing quantities of hydrogen occluded for bulk transportation/storage at low energy, and decreasing cost. The surveys on hydrogen-fired turbines extract a number of problems to be solved, e.g., controlling hydrogen combustion, turbine designs, materials withstanding superhigh temperature for high-temperature combustion of hydrogen, and optimization of the power generation systems. (NEDO)

Beyond Borders: Participatory Design Research and the Changing Role of Design

Science.gov (United States)

Blair-Early, Adream

2010-01-01

University art and design programs are branching out and creating cross-disciplinary programs and research centers that connect design students and faculty across various disciplines such as business, engineering, architecture, information studies, health sciences and education. A human-centered, problem-based approach to design research looks to…

Design for energy efficiency: Energy efficient industrialized housing research program. Progress report

Energy Technology Data Exchange (ETDEWEB)

Kellett, R.; Berg, R.; Paz, A.; Brown, G.Z.

1991-03-01

Since 1989, the U.S. Department of Energy has sponsored the Energy Efficient Industrialized Housing research program (EEIH) to improve the energy efficiency of industrialized housing. Two research centers share responsibility for this program: The Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. Additional funding is provided through the participation of private industry, state governments and utilities. The program is guided by a steering committee comprised of industry and government representatives. This report summarizes Fiscal Year (FY) 1990 activities and progress, and proposed activities for FY 1991 in Task 2.1 Design for Energy Efficiency. This task establishes a vision of energy conservation opportunities in critical regions, market segments, climate zones and manufacturing strategies significant to industrialized housing in the 21st Century. In early FY 1990, four problem statements were developed to define future housing demand scenarios inclusive of issues of energy efficiency, housing design and manufacturing. Literature surveys were completed to assess seven areas of influence for industrialized housing and energy conservation in the future. Fifty-five future trends were identified in computing and design process; manufacturing process; construction materials, components and systems; energy and environment; demographic context; economic context; and planning policy and regulatory context.

Using design science in educational technology research projects

Directory of Open Access Journals (Sweden)

Susan M. Chard

2017-12-01

Full Text Available Design science is a research paradigm where the development and evaluation of a technology artefact is a key contribution. Design science is used in many domains and this paper draws on those domains to formulate a generic structure for design science research suitable for educational technology research projects. The paper includes guidelines for writing proposals using the design science research methodology for educational technology research and presents a generic research report structure. The paper presents ethical issues to consider in design science research being conducted in educational settings and contributes guidelines for assessment when the research contribution involves the creation of a technology artefact.

Methodological design of the National Health and Nutrition Survey 2016

Directory of Open Access Journals (Sweden)

Martín Romero-Martínez

2017-05-01

Full Text Available Objective. Describe the design methodology of the halfway health and nutrition national survey (Ensanut-MC 2016. Materials and methods. The Ensanut-MC is a national probabilistic survey whose objective population are the in­habitants of private households in Mexico. The sample size was determined to make inferences on the urban and rural areas in four regions. Describes main design elements: target population, topics of study, sampling procedure, measurement procedure and logistics organization. Results. A final sample of 9 479 completed household interviews, and a sample of 16 591 individual interviews. The response rate for households was 77.9%, and the response rate for individuals was 91.9%. Conclusions. The Ensanut-MC probabilistic design allows valid statistical inferences about interest parameters for Mexico´s public health and nutrition, specifically on over­weight, obesity and diabetes mellitus. Updated information also supports the monitoring, updating and formulation of new policies and priority programs.

Survey of Postdoctorates at FFRDCs: Final Report [Federally Funded Research and Development Centers

Energy Technology Data Exchange (ETDEWEB)

Mulrow, Jeri

2010-06-30

The 2009 FFRDC survey collected the total number of postdocs employed by FFRDCs in the United States—categorized by source of support, citizenship, sex, and field of research—as of October 1, 2009. The universe for the 2009 GSS-FFRDC survey was the Master Government List of Federally Funded Research and Development Centers. The 2009 survey also contacted the NIH’s Intramural Research Program because it employs the largest number of postdocs in the federal government. The FFRDC survey collected data via a web instrument. Topics included the type of support the postdocs received (federal and nonfederal), their sex, citizenship, race/ethnicity, and field of research.

Environmental Survey Report for ORNL: Small Mammal Abundance and Distribution Survey Oak Ridge National Environmental Research Park 2009 - 2010

Energy Technology Data Exchange (ETDEWEB)

Giffen, Neil R [ORNL; Reasor, R. Scott [Oak Ridge Institute for Science and Education (ORISE); Campbell, Claire L. [Oak Ridge Institute for Science and Education (ORISE)

2009-12-01

This report summarizes a 1-year small mammal biodiversity survey conducted on the Oak Ridge National Environmental Research Park (OR Research Park). The task was implemented through the Oak Ridge National Laboratory (ORNL) Natural Resources Management Program and included researchers from the ORNL Environmental Sciences Division, interns in the Oak Ridge Institute for Science and Education Higher Education Research Experiences Program, and ORNL Environmental Protection Services staff. Eight sites were surveyed reservation wide. The survey was conducted in an effort to determine species abundance and diversity of small mammal populations throughout the reservation and to continue the historical inventory of small mammal presence for biodiversity records. This data collection effort was in support of the approved Wildlife Management Plan for the Oak Ridge Reservation, a major goal of which is to maintain and enhance wildlife biodiversity on the Reservation. Three of the sites (Poplar Creek, McNew Hollow, and Deer Check Station Field) were previously surveyed during a major natural resources inventory conducted in 1996. Five new sites were included in this study: Bearden Creek, Rainy Knob (Natural Area 21), Gum Hollow, White Oak Creek and Melton Branch. The 2009-2010 small mammal surveys were conducted from June 2009 to July 2010 on the Oak Ridge National Environmental Research Park (OR Research Park). The survey had two main goals: (1) to determine species abundance and diversity and (2) to update historical records on the OR Research Park. The park is located on the Department of Energy-owned Oak Ridge Reservation, which encompasses 13,580 ha. The primary focus of the study was riparian zones. In addition to small mammal sampling, vegetation and coarse woody debris samples were taken at certain sites to determine any correlations between habitat and species presence. During the survey all specimens were captured and released using live trapping techniques including

Characteristics of research tracks in dermatology residency programs: a national survey.

Science.gov (United States)

Narala, Saisindhu; Loh, Tiffany; Shinkai, Kanade; Paravar, Taraneh

2017-12-15

Pursuing research is encouraged in dermatology residency programs. Some programs offer specific research or investigative tracks. Currently, there is little data on the structure or scope of research tracks in dermatology residency programs. An anonymous online survey was distributed to the Association of Professors of Dermatology listserve in 2016. Program directors of dermatology residency programs in the United States were asked to participate and 38 of the 95 program directors responded. The survey results confirmed that a 2+2 research track, which is two years of clinical training followed by two years of research, was the most common investigator trackmodel and may promote an academic career at the resident's home institution. Further studies will help determine the most effective research track models to promote long-term outcomes.

Design research and the globalization of healthcare environments.

Science.gov (United States)

Shepley, Mardelle McCuskey; Song, Yilin

2014-01-01

Global healthcare practice has expanded in the past 20 years. At the same time the incorporation of research into the design process has gained prominence as a best practice among architects. The authors of this study investigated the status of design research in a variety of international settings. We intended to answer the question, "how pervasive is healthcare design research outside of the United States?" The authors reviewed the international literature on the design of healthcare facilities. More than 500 international studies and conference proceedings were incorporated in this literature review. A team of five research assistants searched multiple databases comparing approximately 16 keywords to geographic location. Some of those keywords included: evidence-based design, salutogenic design, design research, and healthcare environment. Additional articles were gathered by contacting prominent researchers and asking for their personal assessment of local health design research studies. While there are design researchers in most parts of the world, the majority of studies focus on the needs of populations in developed countries and generate guidelines that have significant cost and cultural implications that prohibit their implementation in developing countries. Additionally, the body of literature discussing the role of culture in healthcare environments is extremely limited. Design researchers must address the cultural implications of their studies. Additionally, we need to expand our research objectives to address healthcare design in countries that have not been previous considered. © 2014 Vendome Group, LLC.

The Role of Hypothesis in Constructive Design Research

OpenAIRE

Bang, Anne Louise; Krogh, Peter; Ludvigsen, Martin; Markussen, Thomas

2012-01-01

It is, today, widely appreciated that Research-through-Design – or Constructive Design Research as we will call it in this paper – allows for designers to produce knowledge based on the skills and capacities of the design field itself.However, most of the research fails to bridge the gap between the general notions of constructive design research and the detailed research activities of the field. We therefore suggest bridging this methodological gap in the academic discussion with what we hav...

Patient Engagement Practices in Clinical Research among Patient Groups, Industry, and Academia in the United States: A Survey.

Directory of Open Access Journals (Sweden)

Sophia K Smith

Full Text Available Patient-centered clinical trial design and execution is becoming increasingly important. No best practice guidelines exist despite a key stakeholder declaration to create more effective engagement models. This study aims to gain a better understanding of attitudes and practices for engaging patient groups so that actionable recommendations may be developed.Individuals from industry, academic institutions, and patient groups were identified through Clinical Trials Transformation Initiative and Drug Information Association rosters and mailing lists. Objectives, practices, and perceived barriers related to engaging patient groups in the planning, conduct, and interpretation of clinical trials were reported in an online survey. Descriptive and inferential statistical analysis of survey data followed a literature review to inform survey questions.Survey respondents (n = 179 valued the importance of involving patient groups in research; however, patient group respondents valued their contributions to research protocol development, funding acquisition, and interpretation of study results more highly than those contributions were valued by industry and academic respondents (all p < .001. Patient group respondents placed higher value in open communications, clear expectations, and detailed contract execution than did non-patient group respondents (all p < .05. Industry and academic respondents more often cited internal bureaucratic processes and reluctance to share information as engagement barriers than did patient group respondents (all p < .01. Patient groups reported that a lack of transparency and understanding of the benefits of collaboration on the part of industry and academia were greater barriers than did non-patient group respondents (all p< .01.Despite reported similarities among approaches to engagement by the three stakeholder groups, key differences exist in perceived barriers and benefits to partnering with patient groups among the

Summary of Survey and Workshop Results on Areas of Research in Human Factors for the Design and Operation of New Nuclear Plant Technology - Final Report

International Nuclear Information System (INIS)

Persensky, Julius J.; Joe, Jeffrey; Richards, Robert E.; Barnes, Valerie; Gonzalez, Michelle

2012-01-01

in Advanced Systems. 4. Management of Unplanned, Unanticipated Events. 5. Human System Interface (HSI) Design Principles for Supporting Operator Cognitive Functions. 6. Complexity Issues in Advanced Systems. 7. Organizational Factors - Safety Culture. 8. Human Factors Engineering (HFE) Methods and Tools. The WGHOF undertook two efforts to respond to recommendations in the TOP. The first was the development and implementation of a survey to identify the level of interest in performing research projects related to the eight research topic areas and to assess the level of interest in collaborating in such research. The second effort was implementation of a workshop to discuss how the use of new human-system technology in the operation of NPPs may affect reliable human performance and plant safety. (authors)

Research and Design in Landscape Architecture

NARCIS (Netherlands)

Nijhuis, S.; Bobbink, I.; Jauslin, D.T.

2011-01-01

This paper aims to introduce the particular methodology of the author's and their colleagues at TU Delft Chair of Landscape Architecture. This approach is characterised by theories, methods and techniques converging towards design and research and research by design. The relation and interaction

Customer satisfaction surveys: Methodological recommendations for financial service providers

Directory of Open Access Journals (Sweden)

Đorđić Marko

2010-01-01

Full Text Available This methodological article investigates practical challenges that emerge when conducting customer satisfaction surveys (CSS for financial service providers such as banks, insurance or leasing companies, and so forth. It displays methodological recommendations in reference with: (a survey design, (b sampling, (c survey method, (d questionnaire design, and (e data acquisition. Article provides appropriate explanations that usage of: two-stage survey design, SRS method, large samples, and rigorous fieldwork preparation can enhance the overall quality of CSS in financial services. Proposed methodological recommendations can primarily be applied to the primary quantitative marketing research in retail financial services. However, majority of them can be successfully applied when conducting primary quantitative marketing research in corporate financial services as well. .

Public Interest in Medical Research Participation: Does It Matter if Patients or Community Members Have Helped Design the Study?

Science.gov (United States)

Cobb, Enesha M; Gebremariam, Achamyeleh; Singer, Dianne; Davis, Matthew M

2015-10-01

We determined national levels of public participation in medical research study design. We compared public interest in medical research participation (MRP) in studies overall, versus studies explicitly designed with public involvement. Cross-sectional household survey of US population in June 2013. Descriptive statistics estimated participation in medical research study design. Chi-square test compared levels of interest in MRP if respondent knew patients or community members helped design the study. Of 2,048 respondents (participation rate 60%), 5% knew someone who had helped design a medical research study. There was no association between having known someone or personal participation in study design and willingness to engage in MRP. Although the overall proportion of respondents who would consider MRP initially (51%) was similar to the proportion who would consider MRP with community member involvement in study design (49%), the changes in respondents' views across the different scenarios were significantly greater than what would have been expected by chance. We found similar levels of interest in MRP whether or not the public is involved in medical research study design. This finding may indicate that public involvement in study design, like community-based participatory research, may not affect overall rates of MRP. © 2015 Wiley Periodicals, Inc.

Getting from neuron to checkmark: Models and methods in cognitive survey research

NARCIS (Netherlands)

Holleman, B.C.; Murre, J.M.J.

2008-01-01

Since the 1980s much work has been done in the field of Cognitive Survey Research. In an interdisciplinary endeavour, survey methodologists and cognitive psychologists (as well as social psychologists and linguists) have worked to unravel the cognitive processes underlying survey responses: to

Research Design – Composition, Configuration and Interdependencies

DEFF Research Database (Denmark)

Kastberg, Peter

2016-01-01

In this essay I will present an integrative view on research design. I will introduce what I take to be the skeleton components of any research design within the social sciences, i.e. the elements of research question, philosophy of science, methodology, method and data. With this as my point...... of departure I will go on to focus on a presentation, a discussion and an evaluation of a new appreciation of the interdependencies of the elements in the research design. An appreciation that favors a relational rather than an atomistic outlook and which gives rise to an ecological conceptualization......). At a more concrete level, it aims at presenting an idea of research design which would – hopefully – be an inspiration to (young) scholars....

The state of web-based research: A survey and call for inclusion in curricula.

Science.gov (United States)

Krantz, John H; Reips, Ulf-Dietrich

2017-10-01

The first papers that reported on conducting psychological research on the web were presented at the Society for Computers in Psychology conference 20 years ago, in 1996. Since that time, there has been an explosive increase in the number of studies that use the web for data collection. As such, it seems a good time, 20 years on, to examine the health and adoption of sound practices of research on the web. The number of studies conducted online has increased dramatically. Overall, it seems that the web can be a method for conducting valid psychological studies. However, it is less clear that students and researchers are aware of the nature of web research. While many studies are well conducted, there is also a certain laxness appearing regarding the design and conduct of online studies. This laxness appears both anecdotally to the authors as managers of large sites for posting links to online studies, and in a survey of current researchers. One of the deficiencies discovered is that there is no coherent approach to educating researchers as to the unique features of web research.

Metamodels for Computer-Based Engineering Design: Survey and Recommendations

Science.gov (United States)

Simpson, Timothy W.; Peplinski, Jesse; Koch, Patrick N.; Allen, Janet K.

1997-01-01

The use of statistical techniques to build approximations of expensive computer analysis codes pervades much of todays engineering design. These statistical approximations, or metamodels, are used to replace the actual expensive computer analyses, facilitating multidisciplinary, multiobjective optimization and concept exploration. In this paper we review several of these techniques including design of experiments, response surface methodology, Taguchi methods, neural networks, inductive learning, and kriging. We survey their existing application in engineering design and then address the dangers of applying traditional statistical techniques to approximate deterministic computer analysis codes. We conclude with recommendations for the appropriate use of statistical approximation techniques in given situations and how common pitfalls can be avoided.

Design of a Mission Data Storage and Retrieval System for NASA Dryden Flight Research Center

Science.gov (United States)

Lux, Jessica; Downing, Bob; Sheldon, Jack

2007-01-01

The Western Aeronautical Test Range (WATR) at the NASA Dryden Flight Research Center (DFRC) employs the WATR Integrated Next Generation System (WINGS) for the processing and display of aeronautical flight data. This report discusses the post-mission segment of the WINGS architecture. A team designed and implemented a system for the near- and long-term storage and distribution of mission data for flight projects at DFRC, providing the user with intelligent access to data. Discussed are the legacy system, an industry survey, system operational concept, high-level system features, and initial design efforts.

Balancing research and organizational capacity building in front-end project design

DEFF Research Database (Denmark)

Hjortsø, Carsten Nico Portefée; Meilby, Henrik

2013-01-01

is more complex. We identify 11 specific factors influencing front-end project management related to structure, process and relationship, and we theorize about how these factors influence the choice between research and more general capacity development activities. Copyright © 2013 John Wiley & Sons, Ltd......, but in order for partnerships to comply with general governance-level recommendations, a better understanding is needed of how specific context-dependent factors influence the development and execution of projects. In this article, we aim to contribute to the understanding of factors influencing the design...... phase of RCB partnerships and examine how they influence the balance between performing collaborative research and developing general organizational capacity. Data collection was based on a survey (n = 25), and individual interviews and focus group discussions with 17 Danish project managers from...

Utilizing the Total Design Method in medicine: maximizing response rates in long, non-incentivized, personal questionnaire postal surveys.

Science.gov (United States)

Kazzazi, Fawz; Haggie, Rebecca; Forouhi, Parto; Kazzazi, Nazar; Malata, Charles M

2018-01-01

Maximizing response rates in questionnaires can improve their validity and quality by reducing non-response bias. A comprehensive analysis is essential for producing reasonable conclusions in patient-reported outcome research particularly for topics of a sensitive nature. This often makes long (≥7 pages) questionnaires necessary but these have been shown to reduce response rates in mail surveys. Our work adapted the "Total Design Method," initially produced for commercial markets, to raise response rates in a long (total: 11 pages, 116 questions), non-incentivized, very personal postal survey sent to almost 350 women. A total of 346 women who had undergone mastectomy and immediate breast reconstruction from 2008-2014 (inclusive) at Addenbrooke's University Hospital were sent our study pack (Breast-Q satisfaction questionnaire and support documents) using our modified "Total Design Method." Participants were sent packs and reminders according to our designed schedule. Of the 346 participants, we received 258 responses, an overall response rate of 74.5% with a useable response rate of 72.3%. One hundred and six responses were received before the week 1 reminder (30.6%), 120 before week 3 (34.6%), 225 before the week 7 reminder (64.6%) and the remainder within 3 weeks of the final pack being sent. The median age of patients that the survey was sent to, and the median age of the respondents, was 54 years. In this study, we have demonstrated the successful implementation of a novel approach to postal surveys. Despite the length of the questionnaire (nine pages, 116 questions) and limitations of expenses to mail a survey to ~350 women, we were able to attain a response rate of 74.6%.

Design-Build Partnership Attributes Survey Analysis

National Research Council Canada - National Science Library

Pyle, Raymond

1998-01-01

Two basic hypotheses were investigated: 1. Finding these attributes for success for a design-build partnership may be accomplished by transferring concepts and ideas from business research on partnership formation. 2...

Conducting Classroom Design Research with Teachers

Science.gov (United States)

Stephan, Michelle. L.

2015-01-01

Design research is usually motivated by university members with experience and interest in building theory and instructional designs in collaboration with one teacher. Typically, the teacher is considered as a member of the research team, with the primary responsibility of implementing instruction. However, in this chapter, I describe a Classroom…

5th International Conference on Research into Design

CERN Document Server

2015-01-01

This book showcases cutting-edge research papers from the 5th International Conference on Research into Design – the largest in India in this area – written by eminent researchers from across the world on design process, technologies, methods and tools, and their impact on innovation, for supporting design across boundaries. The special features of the book are the variety of insights into the product and system innovation process, and the host of methods and tools from all major areas of design research for the enhancement of the innovation process. The main benefit of the book for researchers in various areas of design and innovation are access to the latest quality research in this area, with the largest collection of research from India. For practitioners and educators, it is exposure to an empirically validated suite of theories, models, methods and tools that can be taught and practiced for design-led innovation.

Using Network Science to Support Design Research

DEFF Research Database (Denmark)

Parraguez Ruiz, Pedro; Maier, Anja

2016-01-01

and societal impact. This chapter contributes to the use of network science in empirical studies of design organisations. It focuses on introducing a network-based perspective on the design process and in particular on making use of network science to support design research and practice. The main contribution...... of this chapter is an overview of the methodological challenges and core decision points when embarking on network-based design research, namely defining the overall research purpose and selecting network features. We furthermore highlight the potential for using archival data, the opportunities for navigating...

Survey on astrobiology research and teaching activities within the United kingdom.

Science.gov (United States)

Dartnell, Lewis R; Burchell, Mark J

2009-10-01

While astrobiology is apparently growing steadily around the world, in terms of the number of researchers drawn into this interdisciplinary area and teaching courses provided for new students, there have been very few studies conducted to chart this expansion quantitatively. To address this deficiency, the Astrobiology Society of Britain (ASB) conducted a questionnaire survey of universities and research institutions nationwide to ascertain the current extent of astrobiology research and teaching in the UK. The aim was to provide compiled statistics and an information resource for those who seek research groups or courses of study, and to facilitate new interdisciplinary collaborations. The report here summarizes details gathered on 33 UK research groups, which involved 286 researchers (from undergraduate project students to faculty members). The survey indicates that around 880 students are taking university-level courses, with significant elements of astrobiology included, every year in the UK. Data are also presented on the composition of astrobiology students by their original academic field, which show a significant dominance of physics and astronomy students. This survey represents the first published systematic national assessment of astrobiological academic activity and indicates that this emerging field has already achieved a strong degree of penetration into the UK academic community.

Data to inform a social media component for professional development and practices: A design-based research study.

Science.gov (United States)

Novakovich, Jeanette; Shaw, Steven; Miah, Sophia

2017-02-01

This DIB article includes the course artefacts, instruments, survey data, and descriptive statistics, along with in-depth correlational analysis for the first iteration of a design-based research study on designing curriculum for developing online professional identity and social media practices for a multi-major advanced professional writing course. Raw data was entered into SPSS software. For interpretation and discussion, please see the original article entitled, "Designing curriculum to shape professional social media skills and identity in virtual communities of practice" (J. Novakovich, S. Miah, S. Shaw, 2017) [1].

6th International Conference on Research into Design

CERN Document Server

Chakrabarti, Debkumar; ICoRD 2017; Research into design for communities

2017-01-01

This book showcases cutting-edge research papers from the 6th International Conference on Research into Design (ICoRD 2017) – the largest in India in this area – written by eminent researchers from across the world on design process, technologies, methods and tools, and their impact on innovation, for supporting design for communities. While design traditionally focused on the development of products for the individual, the emerging consensus on working towards a more sustainable world demands greater attention to designing for and with communities, so as to promote their sustenance and harmony - within each community and across communities. The special features of the book are the insights into the product and system innovation process, and the host of methods and tools from all major areas of design research for the enhancement of the innovation process. The main benefit of the book for researchers in various areas of design and innovation are access to the latest quality research in this area, with the...

Survey of Four Decades of Addiction Prevalence Researches in Iran

Directory of Open Access Journals (Sweden)

Hamid Sarrami

2013-07-01

Full Text Available Objective: The main aim of this research is the survey of addiction and drug abuse and psychotropic drugs prevalence researches which have been done in our country in last decades Method: To do this research all addiction and drug abuse prevalence researches that have been taken place were collected and analyzed. Results: the results of the researches show that the statistics of addiction has been in an oscillation as in 1390, the survey in 15 to 64 years old people (according to 1385 census that is 50 million people, is equal to one million and three hundred thousand and twenty five persons. Conclusion: the results of the four decades of addiction prevalence in Iran show that in according to the size of the threat of drugs and psychotropic drugs and addiction prevalence and also the change of gender, matrimony, age, job and the level of addicts education, less attention has been given to the drug abuse prevalence researches in public, youngsters, students and governmental and governmental non- officials.

Using design science research to develop online enhanced pharmaceutical care services.

Science.gov (United States)

Lapão, Luís Velez; Gregório, João; Mello, Diogo; Cavaco, Afonso; Mira Da Silva, Miguel; Lovis, Christian

2014-01-01

The ePharmaCare project aims at assessing the potential of eHealth services for the provision of pharmaceutical services interacting actively with patients. The results presented here focus on the first three steps of Design Science Research Methodology. A mixed methods approach was used with an online survey to collect data on use of information technologies in community pharmacy, followed by an exploratory observational time and business processes study, which use the shadowing method to identify and assess the opportunity to lunch online services. Combining this with the Service Experiment Blueprint and the Dáder method an enhanced pharmaceutical service was designed. Next, an artifact is developed and a prototype is implemented to demonstrate the value of online pharmaceutical services' delivery. This new service could represent a new perspective for pharmaceutical services integration within the health system.

Achievement report on the incoming projects related to ITS. Research and survey involving 'Research and development of universal design vehicle based on ITS technology'; ITS renkei kokei project an. 'ITS gijutsu wo tenkaishita universal design vehicle no kenkyu kaihatsu' ni kakawaru kenkyu chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

For the promotion of 'Report on Strategy of Automobile Industrial Technologies - Strategy 2 - Promotion of Development of Vehicle Environment Recognition Technology and Driver's State Detection Technology,' investigations and studies including overseas surveys are conducted over six selected subjects which are (1) ITS (Intelligent Transportation System) and VCSS (Voice Communications Switching System), (2) old people, handicapped people, and universal design, (3) intelligent interface, (4) techniques of assessing bionic data and load of driving, (5) driving simulator and virtual reality, and (6) data communication, mobile data communication in particular. It is then found that, on the assumption that there exists a mobile communications environment such as ITS or Internet aboard the automobile, it is important to develop a universal design automobile which adapts itself to the driver thereby respecting driver's viewpoint and that such is to be accomplished by grasping driver's characteristics especially under extraordinary conditions in the way of Kansei engineering and by redesigning the driver's operating system making use of the active interface technology. A conclusion is reached that development should continue in compliance with the separately specified 6 items which are indispensable for the research and development of an ITS based man-adaptive automobile. (NEDO)

Telemedicine for Developing Countries. A Survey and Some Design Issues.

Science.gov (United States)

Combi, Carlo; Pozzani, Gabriele; Pozzi, Giuseppe

2016-11-02

Developing countries need telemedicine applications that help in many situations, when physicians are a small number with respect to the population, when specialized physicians are not available, when patients and physicians in rural villages need assistance in the delivery of health care. Moreover, the requirements of telemedicine applications for developing countries are somewhat more demanding than for developed countries. Indeed, further social, organizational, and technical aspects need to be considered for successful telemedicine applications in developing countries. We consider all the major projects in telemedicine, devoted to developing countries, as described by the proper scientific literature. On the basis of such literature, we want to define a specific taxonomy that allows a proper classification and a fast overview of telemedicine projects in developing countries. Moreover, by considering both the literature and some recent direct experiences, we want to complete such overview by discussing some design issues to be taken into consideration when developing telemedicine software systems. We considered and reviewed the major conferences and journals in depth, and looked for reports on the telemedicine projects. We provide the reader with a survey of the main projects and systems, from which we derived a taxonomy of features of telemedicine systems for developing countries. We also propose and discuss some classification criteria for design issues, based on the lessons learned in this research area. We highlight some challenges and recommendations to be considered when designing a telemedicine system for developing countries.

Survey of domestic research on superconducting magnetic energy storage

International Nuclear Information System (INIS)

Dresner, L.

1991-09-01

This report documents the results of a survey of domestic research on superconducting magnetic energy storage (SMES) undertaken with the support of the Oak Ridge National Laboratory (ORNL) Superconductivity Pilot Center. Each survey entry includes the following: Name, address, and other telephone and facsimile numbers of the principal investigator and other staff members; funding for fiscal year 1991, 1992, 1993; brief descriptions of the program, the technical progress to date, and the expected technical progress; a note on any other collaboration. Included with the survey are recommendations intended to help DOE decide how best to support SMES research and development (R ampersand D). To summarize, I would say that important elements of a well-rounded SMES research program for DOE are as follows. (1) Construction of a large ETM. (2) Development of SMES as an enabling technology for solar and wind generation, especially in conjunction with the ETM program, if possible. (3) Development of small SMES units for electric networks, for rapid transit, and as noninterruptible power supplies [uses (2), (3), and (4) above]. In this connection, lightweight, fiber-reinforced polymer structures, which would be especially advantageous for space and transportation applications, should be developed. (4) Continued study of the potential impacts of high-temperature superconductors on SMES, with construction as soon as feasible of small SMES units using high-temperature superconductors (HTSs)

Advancing vector biology research: a community survey for future directions, research applications and infrastructure requirements

Science.gov (United States)

Kohl, Alain; Pondeville, Emilie; Schnettler, Esther; Crisanti, Andrea; Supparo, Clelia; Christophides, George K.; Kersey, Paul J.; Maslen, Gareth L.; Takken, Willem; Koenraadt, Constantianus J. M.; Oliva, Clelia F.; Busquets, Núria; Abad, F. Xavier; Failloux, Anna-Bella; Levashina, Elena A.; Wilson, Anthony J.; Veronesi, Eva; Pichard, Maëlle; Arnaud Marsh, Sarah; Simard, Frédéric; Vernick, Kenneth D.

2016-01-01

Vector-borne pathogens impact public health, animal production, and animal welfare. Research on arthropod vectors such as mosquitoes, ticks, sandflies, and midges which transmit pathogens to humans and economically important animals is crucial for development of new control measures that target transmission by the vector. While insecticides are an important part of this arsenal, appearance of resistance mechanisms is increasingly common. Novel tools for genetic manipulation of vectors, use of Wolbachia endosymbiotic bacteria, and other biological control mechanisms to prevent pathogen transmission have led to promising new intervention strategies, adding to strong interest in vector biology and genetics as well as vector–pathogen interactions. Vector research is therefore at a crucial juncture, and strategic decisions on future research directions and research infrastructure investment should be informed by the research community. A survey initiated by the European Horizon 2020 INFRAVEC-2 consortium set out to canvass priorities in the vector biology research community and to determine key activities that are needed for researchers to efficiently study vectors, vector-pathogen interactions, as well as access the structures and services that allow such activities to be carried out. We summarize the most important findings of the survey which in particular reflect the priorities of researchers in European countries, and which will be of use to stakeholders that include researchers, government, and research organizations. PMID:27677378

Environmental Survey preliminary report, Solar Energy Research Institute, Golden, Colorado

Energy Technology Data Exchange (ETDEWEB)

1988-10-01

This report presents the preliminary findings of the first phase of the Environmental Survey of the US Department of Energy's (DOE) Solar Energy Research Institute (SERI), conducted December 14 through 18, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. The team includes outside experts supplied by private contractors. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with SERI. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at SERI, and interviews with site personnel. 33 refs., 22 figs., 21 tabs.

Designing Effective Undergraduate Research Experiences

Science.gov (United States)

Severson, S.

2010-12-01

I present a model for designing student research internships that is informed by the best practices of the Center for Adaptive Optics (CfAO) Professional Development Program. The dual strands of the CfAO education program include: the preparation of early-career scientists and engineers in effective teaching; and changing the learning experiences of students (e.g., undergraduate interns) through inquiry-based "teaching laboratories." This paper will focus on the carry-over of these ideas into the design of laboratory research internships such as the CfAO Mainland internship program as well as NSF REU (Research Experiences for Undergraduates) and senior-thesis or "capstone" research programs. Key ideas in maximizing student learning outcomes and generating productive research during internships include: defining explicit content, scientific process, and attitudinal goals for the project; assessment of student prior knowledge and experience, then following up with formative assessment throughout the project; setting reasonable goals with timetables and addressing motivation; and giving students ownership of the research by implementing aspects of the inquiry process within the internship.

Children as respondents in survey research: Cognitive development and response quality

NARCIS (Netherlands)

Borgers, N.; Leeuw, E.D. de; Hox, J.J.

2000-01-01

Although children are no longer a neglected minority in official statistics and surveys, methodological knowledge on how to survey children is still scarce. Researchers have to rely mainly on ad-hoc knowledge from such diverse fields as child psychiatry and educational testing, or extrapolate

Consumer and community involvement in health and medical research: evaluation by online survey of Australian training workshops for researchers.

Science.gov (United States)

McKenzie, Anne; Alpers, Kirsten; Heyworth, Jane; Phuong, Cindy; Hanley, Bec

2016-01-01

In Australia, since 2009, the Consumer and Community Involvement Program (formerly the Consumer and Community Participation Program) has developed and run workshops to help people working in health and medical research involve more consumers (patients) and community members (the public) in their research. In 2012, workshop attendees were invited to do an online survey to find out the effect, if any, that attending a workshop had on their awareness of and attitudes to consumer and community involvement. They were also asked about changes in their behaviour when it came to the involvement of consumers and the community in their work. The study found that, for people who answered the survey, more than double the number found consumer and community involvement very relevant after attending a workshop, compared with the number who thought that before attending one. Also, amongst those who answered the survey, 94 % thought that the workshop increased their understanding about involvement. Background There is limited evidence of the benefits of providing training workshops for researchers on how to involve consumers (patients) and the community (public) in health and medical research. Australian training workshops were evaluated to contribute to the evidence base. The key objective was to evaluate the impact of the workshops in increasing awareness of consumer and community involvement; changing attitudes to future implementation of involvement activities and influencing behaviour in the methods of involvement used. A secondary objective was to use a formal evaluation survey to build on the anecdotal feedback received from researchers about changes in awareness, attitudes and behaviours. Methods The study used a cross-sectional, online survey of researchers, students, clinicians, administrators and members of non-government organisations who attended Consumer and Community Involvement Program training workshops between 2009 and 2012 to ascertain changes to awareness

Web-based Surveys: Changing the Survey Process

OpenAIRE

Gunn, Holly

2002-01-01

Web-based surveys are having a profound influence on the survey process. Unlike other types of surveys, Web page design skills and computer programming expertise play a significant role in the design of Web-based surveys. Survey respondents face new and different challenges in completing a Web-based survey. This paper examines the different types of Web-based surveys, the advantages and challenges of using Web-based surveys, the design of Web-based surveys, and the issues of validity, error, ...

Schematic representation of case study research designs.

Science.gov (United States)

Rosenberg, John P; Yates, Patsy M

2007-11-01

The paper is a report of a study to demonstrate how the use of schematics can provide procedural clarity and promote rigour in the conduct of case study research. Case study research is a methodologically flexible approach to research design that focuses on a particular case - whether an individual, a collective or a phenomenon of interest. It is known as the 'study of the particular' for its thorough investigation of particular, real-life situations and is gaining increased attention in nursing and social research. However, the methodological flexibility it offers can leave the novice researcher uncertain of suitable procedural steps required to ensure methodological rigour. This article provides a real example of a case study research design that utilizes schematic representation drawn from a doctoral study of the integration of health promotion principles and practices into a palliative care organization. The issues discussed are: (1) the definition and application of case study research design; (2) the application of schematics in research; (3) the procedural steps and their contribution to the maintenance of rigour; and (4) the benefits and risks of schematics in case study research. The inclusion of visual representations of design with accompanying explanatory text is recommended in reporting case study research methods.

Informed Design of Mixed-Mode Surveys : Evaluating mode effects on measurement and selection error

NARCIS (Netherlands)

Klausch, Thomas|info:eu-repo/dai/nl/341427306

2014-01-01

“Mixed-mode designs” are innovative types of surveys which combine more than one mode of administration in the same project, such as surveys administered partly on the web (online), on paper, by telephone, or face-to-face. Mixed-mode designs have become increasingly popular in international survey

Involvement of consumers in studies run by the Medical Research Council Clinical Trials Unit: Results of a survey

Directory of Open Access Journals (Sweden)

Vale Claire L

2012-01-01

Full Text Available Abstract Background We aimed to establish levels of consumer involvement in randomised controlled trials (RCTs, meta-analyses and other studies carried out by the UK Medical Research Council (MRC Clinical Trials Unit across the range of research programs, predominantly in cancer and HIV. Methods Staff responsible for studies that were included in a Unit Progress Report (MRC CTU, April 2009 were asked to complete a semi-structured questionnaire survey regarding consumer involvement. This was defined as active involvement of consumers as partners in the research process and not as subjects of that research. The electronic questionnaires combined open and closed questions, intended to capture quantitative and qualitative information on whether studies had involved consumers; types of activities undertaken; recruitment and support; advantages and disadvantages of involvement and its perceived impact on aspects of the research. Results Between October 2009 and April 2010, 138 completed questionnaires (86% were returned. Studies had been conducted over a 20 year period from 1989, and around half were in cancer; 30% in HIV and 20% were in other disease areas including arthritis, tuberculosis and blood transfusion medicine. Forty-three studies (31% had some consumer involvement, most commonly as members of trial management groups (TMG [88%]. A number of positive impacts on both the research and the researcher were identified. Researchers generally felt involvement was worthwhile and some felt that consumer involvement had improved the credibility of the research. Benefits in design and quality, trial recruitment, dissemination and decision making were also perceived. Researchers felt they learned from consumer involvement, albeit that there were some barriers. Conclusions Whilst most researchers identified benefits of involving consumers, most of studies included in the survey had no involvement. Information from this survey will inform the development

Involvement of consumers in studies run by the Medical Research Council Clinical Trials Unit: results of a survey.

Science.gov (United States)

Vale, Claire L; Thompson, Lindsay C; Murphy, Claire; Forcat, Silvia; Hanley, Bec

2012-01-13

We aimed to establish levels of consumer involvement in randomised controlled trials (RCTs), meta-analyses and other studies carried out by the UK Medical Research Council (MRC) Clinical Trials Unit across the range of research programs, predominantly in cancer and HIV. Staff responsible for studies that were included in a Unit Progress Report (MRC CTU, April 2009) were asked to complete a semi-structured questionnaire survey regarding consumer involvement. This was defined as active involvement of consumers as partners in the research process and not as subjects of that research. The electronic questionnaires combined open and closed questions, intended to capture quantitative and qualitative information on whether studies had involved consumers; types of activities undertaken; recruitment and support; advantages and disadvantages of involvement and its perceived impact on aspects of the research. Between October 2009 and April 2010, 138 completed questionnaires (86%) were returned. Studies had been conducted over a 20 year period from 1989, and around half were in cancer; 30% in HIV and 20% were in other disease areas including arthritis, tuberculosis and blood transfusion medicine. Forty-three studies (31%) had some consumer involvement, most commonly as members of trial management groups (TMG) [88%]. A number of positive impacts on both the research and the researcher were identified. Researchers generally felt involvement was worthwhile and some felt that consumer involvement had improved the credibility of the research. Benefits in design and quality, trial recruitment, dissemination and decision making were also perceived. Researchers felt they learned from consumer involvement, albeit that there were some barriers. Whilst most researchers identified benefits of involving consumers, most of studies included in the survey had no involvement. Information from this survey will inform the development of a unit policy on consumer involvement, to guide future

Barriers to Implementing Treatment Integrity Procedures in School Psychology Research: Survey of Treatment Outcome Researchers

Science.gov (United States)

Sanetti, Lisa M. Hagermoser; DiGennaro Reed, Florence D.

2012-01-01

Treatment integrity data are essential to drawing valid conclusions in treatment outcome studies. Such data, however, are not always included in peer-reviewed research articles in school psychology or related fields. To gain a better understanding of why treatment integrity data are lacking in the school psychology research, we surveyed the…

Gaining a Competitive Edge through Action Design Research

Science.gov (United States)

Alexa, L.; Alexa, M.; Avasilcăi, S.

2016-08-01

The current business environment is characterized by increased competition and highly innovative approach, in order to create products and services to better respond to the costumers’ needs and expectations. In this specific context, the research approaches need to be more flexible and business oriented and so, throughout the paper we have used a research method that combines design research and action research, named Action Design Research which is a research method used for generating prescriptive design knowledge through building and evaluating IT artifacts in an organizational setting [1]. Following the Action Design Research stages and principles: problem identification, building, intervention and evaluation, reflection and learning and formalization of learning, the research team has developed an online instrument used to actively involve the consumer in the product development process, in order to generate a better consumers insight regarding their needs and desires and to design and/or adjust the product accordingly. The customer engagement IT tool created and tested by using Action Design Research, E-PICUS, has been developed within the framework of the research project „E-solutions for innovation through customer pro-active involvement in value creation to increase organisational competitiveness (E-PICUS)”, PN- II-PT-PCCA-2013-4-1811, currently undergoing.

Web-Face-to-Face Mixed-Mode Design in a Longitudinal Survey: Effects on Participation Rates, Sample Composition, and Costs

Directory of Open Access Journals (Sweden)

Bianchi Annamaria

2017-06-01

Full Text Available Sequential mixed-mode designs are increasingly considered as an alternative to interviewer-administered data collection, allowing researchers to take advantage of the benefits of each mode. We assess the effects of the introduction of a sequential web-face-to-face mixed-mode design over three waves of a longitudinal survey in which members were previously interviewed face-to-face. Findings are reported from a large-scale randomised experiment carried out on the UK Household Longitudinal Study. No differences are found between the mixed-mode design and face-to-face design in terms of cumulative response rates and only minimal differences in terms of sample composition. On the other hand, potential cost savings are evident.

Long-Term Research in Ecology and Evolution (LTREE): 2015 survey data.

Science.gov (United States)

Bradford, Mark A; Leiserowitz, Anthony; Feinberg, Geoffrey; Rosenthal, Seth A; Lau, Jennifer A

2017-11-01

To systematically assess views on contributions and future activities for long-term research in ecology and evolution (LTREE), we conducted and here provide data responses and associated metadata for a survey of ecological and evolutionary scientists. The survey objectives were to: (1) Identify and prioritize research questions that are important to address through long-term, ecological field experiments; and (2) understand the role that these experiments might play in generating and applying ecological and evolutionary knowledge. The survey was developed adhering to the standards of the American Association for Public Opinion Research. It was administered online using Qualtrics Survey Software. Survey creation was a multi-step process, with questions and format developed and then revised with, for example, input from an external advisory committee comprising senior and junior ecological and evolutionary researchers. The final questionnaire was released to ~100 colleagues to ensure functionality and then fielded 2 d later (January 7 th , 2015). Two professional societies distributed it to their membership, including the Ecological Society of America, and it was posted to three list serves. The questionnaire was available through February 8th 2015 and completed by 1,179 respondents. The distribution approach targeted practicing ecologists and evolutionary biologists in the U.S. Quantitative (both ordinal and categorical) closed-ended questions used a predefined set of response categories, facilitating direct comparison across all respondents. Qualitative, open-ended questions, provided respondents the opportunity to develop their own answers. We employed quantitative questions to score views on the extent to which long-term experimental research has contributed to understanding in ecology and evolutionary biology; its role compared to other approaches (e.g., short-term experiments); justifications for and caveats to long-term experiments; and the relative importance

Depth of Field: Discursive design research through film

Directory of Open Access Journals (Sweden)

Timo Arnall

2010-07-01

Full Text Available This article is about the role of film in interaction and product design research with technology, and the use of film in exploring and explaining emerging technologies in multiple contexts. We have engaged in a reflective design research process that uses graphical, audiovisual, and time-based media as a tool, a material and a communicative artefact that enables us to approach complex, obscure and often invisible emerging technologies. We give a discursive account of how film has played an intricate role in our design research practice, from revealing the materiality of invisible wireless technology, to explaining complex technical prototypes, to communicating to a public audience through online films that may fold broader social and cultural discourses back into our design research process. We conclude by elaborating on discursive design approaches to research that use film as a reflective and communicative medium that allows for design research to operate within a social and cultural frame.

Quasi experimental designs in pharmacist intervention research.

Science.gov (United States)

Krass, Ines

2016-06-01

Background In the field of pharmacist intervention research it is often difficult to conform to the rigorous requirements of the "true experimental" models, especially the requirement of randomization. When randomization is not feasible, a practice based researcher can choose from a range of "quasi-experimental designs" i.e., non-randomised and at time non controlled. Objective The aim of this article was to provide an overview of quasi-experimental designs, discuss their strengths and weaknesses and to investigate their application in pharmacist intervention research over the previous decade. Results In the literature quasi experimental studies may be classified into five broad categories: quasi-experimental design without control groups; quasi-experimental design that use control groups with no pre-test; quasi-experimental design that use control groups and pre-tests; interrupted time series and stepped wedge designs. Quasi-experimental study design has consistently featured in the evolution of pharmacist intervention research. The most commonly applied of all quasi experimental designs in the practice based research literature are the one group pre-post-test design and the non-equivalent control group design i.e., (untreated control group with dependent pre-tests and post-tests) and have been used to test the impact of pharmacist interventions in general medications management as well as in specific disease states. Conclusion Quasi experimental studies have a role to play as proof of concept, in the pilot phases of interventions when testing different intervention components, especially in complex interventions. They serve to develop an understanding of possible intervention effects: while in isolation they yield weak evidence of clinical efficacy, taken collectively, they help build a body of evidence in support of the value of pharmacist interventions across different practice settings and countries. However, when a traditional RCT is not feasible for

Implementing Clinical Research Using Factorial Designs: A Primer.

Science.gov (United States)

Baker, Timothy B; Smith, Stevens S; Bolt, Daniel M; Loh, Wei-Yin; Mermelstein, Robin; Fiore, Michael C; Piper, Megan E; Collins, Linda M

2017-07-01

Factorial experiments have rarely been used in the development or evaluation of clinical interventions. However, factorial designs offer advantages over randomized controlled trial designs, the latter being much more frequently used in such research. Factorial designs are highly efficient (permitting evaluation of multiple intervention components with good statistical power) and present the opportunity to detect interactions amongst intervention components. Such advantages have led methodologists to advocate for the greater use of factorial designs in research on clinical interventions (Collins, Dziak, & Li, 2009). However, researchers considering the use of such designs in clinical research face a series of choices that have consequential implications for the interpretability and value of the experimental results. These choices include: whether to use a factorial design, selection of the number and type of factors to include, how to address the compatibility of the different factors included, whether and how to avoid confounds between the type and number of interventions a participant receives, and how to interpret interactions. The use of factorial designs in clinical intervention research poses choices that differ from those typically considered in randomized clinical trial designs. However, the great information yield of the former encourages clinical researchers' increased and careful execution of such designs. Copyright © 2017. Published by Elsevier Ltd.

A survey of core research in information systems

CERN Document Server

Sidorova, Anna; Torres, Russell; Johnson, Vess

2013-01-01

The Information Systems (IS) discipline was founded on the intersection of computer science and organizational sciences, and produced a rich body of research on topics ranging from database design and the strategic role of IT to website design and online consumer behavior. In this book, the authors provide an introduction to the discipline, its development, and the structure of IS research, at a level that is appropriate for emerging and current IS scholars. Guided by a bibliometric study of all research articles published in eight premier IS research journals over a 20-year period, the author

Patient engagement in the design and execution of urologic oncology research.

Science.gov (United States)

Lee, Daniel J; Avulova, Svetlana; Conwill, Ralph; Barocas, Daniel A

2017-09-01

There have been significant effort and financial support to engage patients in the design and execution of medical research. However, little is known about the relative benefits or potential impact of involving patients in research, most efficient practices and systems to enhance their involvement, and potential barriers and challenges that are involved with engaging patients. In this review, we will discuss the value of patient centered research, review the challenges that many of these studies faced, and highlight potential future opportunities to enhance patient involvement in urologic research. An English-language literature search was performed in the electronic databases of Medline (PubMed), EMBASE, Web of Science, Google Scholar, the Cochrane Library, and on the Patient Centered Outcomes Research Institute (PCORI) website. Search items included "patient-centered research," "patient-reported outcomes" and "patient engagement" in various combinations. Although PCORI has funded almost 600 projects with $1.6 billion to improve patient centered research, the search revealed 3 studies of patient engagement in the development, management, and execution of urologic oncology research. Patient engagement in the design and execution of medical research can help align research topics to match patient priorities, improve survey and data collection tools, increase patient recruitment and participation in studies, and improve accessibility and dissemination of clinically relevant results from medical research. However, engagement patients in research requires significant investment of time, financial support, and energy from the patients, stakeholders, and researchers to provide mutual benefit. In the three studies in urologic oncology that involved patients, the patients provided a significant impact on the structure of the studies and helped improve the ability of patients to apply the results from the research studies. The benefits to involving patients in research to

Making Theory Come Alive through Practice-based Design Research

DEFF Research Database (Denmark)

Markussen, Thomas; Knutz, Eva; Rind Christensen, Poul

The aim of this paper is to demonstrate how practice-based design research is able not only to challenge, but also to push toward further development of some of the basic assumpstions in emotion theories as used within design research. In so doing, we wish to increase knolwedge on a central...... epistemological question for design research, namely how practice-based design research can be a vehicle for the construction of new theory for design research....

Design of a new research reactor : 1st year conceptual design

International Nuclear Information System (INIS)

Park, Cheol; Lee, B. C.; Chae, H. T.

2004-01-01

A new research reactor model satisfying the strengthened regulatory environments and the changed circumstances around nuclear society should be prepared for the domestic and international demand of research reactor. This can also lead to the improvement of technologies and fostering manpower obtained during the construction and the operation of HANARO. In this aspect, this study has been launched and the 1st year conceptual design has been carried out in 2003. The major tasks performed at the first year of conceptual design stage are as follows; Establishments of general design requirements of research reactors and experimental facilities, Establishment of fuel and reactor core concepts, Preliminary analysis of reactor physics and thermal-hydraulics for conceptual core, Conceptual design of reactor structure and major systems, International cooperation to establish foundations for exporting

Leveraging Failure in Design Research

Science.gov (United States)

Lobato, Joanne; Walters, C. David; Hohensee, Charles; Gruver, John; Diamond, Jaime Marie

2015-01-01

Even in the resource-rich, more ideal conditions of many design-based classroom interventions, unexpected events can lead to disappointing results in student learning. However, if later iterations in a design research study are more successful, the previous failures can provide opportunities for comparisons to reveal subtle differences in…

Building a Cohesive Body of Design Knowledge: Developments from a Design Science Research Perspective

DEFF Research Database (Denmark)

Cash, Philip; Piirainen, Kalle A.

2015-01-01

researchers have identified difficulties in building on past works, and combining insights from across the field. This work starts to dissolve some of these issues by drawing on Design Science Research to propose an integrated approach for the development of design research knowledge, coupled with pragmatic......Design is an extremely diverse field where there has been widespread debate on how to build a cohesive body of scientific knowledge. To date, no satisfactory proposition has been adopted across the field – hampering scientific development. Without this basis for bringing research together design...... advice for design researchers. This delivers a number of implications for researchers as well as for the field as a whole....

Awareness about medical research among resident doctors in a tertiary care hospital: A cross-sectional survey

Directory of Open Access Journals (Sweden)

Dattatray B Pawar

2012-01-01

Full Text Available Context: Every medical practitioner should strive to contribute to the generation of evidence by conducting research. For carrying out research, adequate knowledge, practical skills, and development of the right attitude are crucial. A literature review shows that data regarding knowledge, attitude, and practices toward medical research, among resident doctors in India, is lacking. Aims: This study was conducted to assess research-related knowledge, attitude, and practices among resident doctors. Settings and Design: A cross-sectional survey was conducted using a pretested, structured, and pre-validated questionnaire. Materials and Methods: With approval of the Institutional Ethics Committee and a verbal consent, a cross-sectional survey among 100 resident doctors pursuing their second and third years in the MD and MS courses was conducted using a structured and pre-validated questionnaire. Statistical Analysis: Descriptive statistics were used to analyze the results. Results: The concept of research hypothesis was known to 58% of the residents. Ninety-eight percent of the residents were aware of the procedure to obtain informed consent. Seventy-six percent agreed that research training should be mandatory. Although 88% of the residents were interested in conducting research in future, 50% had participated in research other than a dissertation project, 28% had made scientific presentations, and only 4% had publications. Lack of time (74%, lack of research curriculum (42%, and inadequate facilities (38% were stated as major obstacles for pursuing research. Conclusions: Although resident doctors demonstrated a fairly good knowledge and positive attitude toward research, it did not translate into practice for most of them. There is a need to improve the existing medical education system to foster research culture among resident doctors

Using a Design Science Perspective to Understand a Complex Design-Based Research Process

DEFF Research Database (Denmark)

Bækgaard, Lars

2012-01-01

The purpose of the paper is to demonstrate how a design science perspective can be used to describe and understand a set of related design-based research processes. We describe and analyze a case study in a manner that is inspired by design science. The case study involves the design of modeling......-based research processes. And we argue that a design science perspective may be useful for both researchers and practitioners....... tools and the redesign of an information service in a library. We use a set of guidelines from a design science perspective to organize the description and analysis of the case study. By doing this we demonstrate the usefulness of design science as an analytical tool for understanding related design...

Recruitment methods for survey research: Findings from the Mid-South Clinical Data Research Network.

Science.gov (United States)

Heerman, William J; Jackson, Natalie; Roumie, Christianne L; Harris, Paul A; Rosenbloom, S Trent; Pulley, Jill; Wilkins, Consuelo H; Williams, Neely A; Crenshaw, David; Leak, Cardella; Scherdin, Jon; Muñoz, Daniel; Bachmann, Justin; Rothman, Russell L; Kripalani, Sunil

2017-11-01

The objective of this study was to report survey response rates and demographic characteristics of eight recruitment approaches to determine acceptability and effectiveness of large-scale patient recruitment among various populations. We conducted a cross sectional analysis of survey data from two large cohorts. Patients were recruited from the Mid-South Clinical Data Research Network using clinic-based recruitment, research registries, and mail, phone, and email approaches. Response rates are reported as patients who consented for the survey divided by the number of eligible patients approached. We contacted more than 90,000 patients and 13,197 patients completed surveys. Median age was 56.3years (IQR 40.9, 67.4). Racial/ethnic distribution was 84.1% White, non-Hispanic; 9.9% Black, non-Hispanic; 1.8% Hispanic; and 4.0% other, non-Hispanic. Face-to-face recruitment had the highest response rate of 94.3%, followed by participants who "opted-in" to a registry (76%). The lowest response rate was for unsolicited emails from the clinic (6.1%). Face-to-face recruitment enrolled a higher percentage of participants who self-identified as Black, non-Hispanic compared to other approaches (18.6% face-to-face vs. 8.4% for email). Technology-enabled recruitment approaches such as registries and emails are effective for recruiting but may yield less racial/ethnic diversity compared to traditional, more time-intensive approaches. Copyright © 2017. Published by Elsevier Inc.

Critical Issues in Research Design in Action Research in an SME Development Context

Science.gov (United States)

McGrath, Helen; O'Toole, Thomas

2012-01-01

Purpose: The main aim of this paper is to develop guidelines on the critical issues to consider in research design in an action research (AR) environment for SME network capability development. Design/methodology/approach: The issues in research design for AR studies are developed from the authors' experience in running learning sets but, in…

On a Modular Approach to the Design of Integrated Social Surveys

Directory of Open Access Journals (Sweden)

Ioannidis Evangelos

2016-06-01

Full Text Available This article considers a modular approach to the design of integrated social surveys. The approach consists of grouping variables into ‘modules’, each of which is then allocated to one or more ‘instruments’. Each instrument is then administered to a random sample of population units, and each sample unit responds to all modules of the instrument. This approach offers a way of designing a system of integrated social surveys that balances the need to limit the cost and the need to obtain sufficient information. The allocation of the modules to instruments draws on the methodology of split questionnaire designs. The composition of the instruments, that is, how the modules are allocated to instruments, and the corresponding sample sizes are obtained as a solution to an optimisation problem. This optimisation involves minimisation of respondent burden and data collection cost, while respecting certain design constraints usually encountered in practice. These constraints may include, for example, the level of precision required and dependencies between the variables. We propose using a random search algorithm to find approximate optimal solutions to this problem. The algorithm is proved to fulfil conditions that ensure convergence to the global optimum and can also produce an efficient design for a split questionnaire.

Effect of survey design and catch rate estimation on total catch estimates in Chinook salmon fisheries

Science.gov (United States)

McCormick, Joshua L.; Quist, Michael C.; Schill, Daniel J.

2012-01-01

Roving–roving and roving–access creel surveys are the primary techniques used to obtain information on harvest of Chinook salmon Oncorhynchus tshawytscha in Idaho sport fisheries. Once interviews are conducted using roving–roving or roving–access survey designs, mean catch rate can be estimated with the ratio-of-means (ROM) estimator, the mean-of-ratios (MOR) estimator, or the MOR estimator with exclusion of short-duration (≤0.5 h) trips. Our objective was to examine the relative bias and precision of total catch estimates obtained from use of the two survey designs and three catch rate estimators for Idaho Chinook salmon fisheries. Information on angling populations was obtained by direct visual observation of portions of Chinook salmon fisheries in three Idaho river systems over an 18-d period. Based on data from the angling populations, Monte Carlo simulations were performed to evaluate the properties of the catch rate estimators and survey designs. Among the three estimators, the ROM estimator provided the most accurate and precise estimates of mean catch rate and total catch for both roving–roving and roving–access surveys. On average, the root mean square error of simulated total catch estimates was 1.42 times greater and relative bias was 160.13 times greater for roving–roving surveys than for roving–access surveys. Length-of-stay bias and nonstationary catch rates in roving–roving surveys both appeared to affect catch rate and total catch estimates. Our results suggest that use of the ROM estimator in combination with an estimate of angler effort provided the least biased and most precise estimates of total catch for both survey designs. However, roving–access surveys were more accurate than roving–roving surveys for Chinook salmon fisheries in Idaho.

Design science research as research approach in doctoral studies

CSIR Research Space (South Africa)

Kotzé, P

2015-08-01

Full Text Available Since the use of design science research (DSR) gained momentum as a research approach in information systems (IS), the adoption of a DSR approach in postgraduate studies became more acceptable. This paper reflects on a study to investigate how a...

Investigating the Reliability and Factor Structure of Kalichman's "Survey 2: Research Misconduct" Questionnaire: A Post Hoc Analysis Among Biomedical Doctoral Students in Scandinavia.

Science.gov (United States)

Holm, Søren; Hofmann, Bjørn

2017-10-01

A precondition for reducing scientific misconduct is evidence about scientists' attitudes. We need reliable survey instruments, and this study investigates the reliability of Kalichman's "Survey 2: research misconduct" questionnaire. The study is a post hoc analysis of data from three surveys among biomedical doctoral students in Scandinavia (2010-2015). We perform reliability analysis, and exploratory and confirmatory factor analysis using a split-sample design as a partial validation. The results indicate that a reliable 13-item scale can be formed (Cronbach's α = .705), and factor analysis indicates that there are four reliable subscales each tapping a different construct: (a) general attitude to misconduct (α = .768), (b) attitude to personal misconduct (α = .784), (c) attitude to whistleblowing (α = .841), and (d) attitude to blameworthiness/punishment (α = .877). A full validation of the questionnaire requires further research. We, nevertheless, hope that the results will facilitate the increased use of the questionnaire in research.

What is it that is being designed in design-based research and how does it qualify as research?

DEFF Research Database (Denmark)

Gundersen, Peter Bukovica; Jørnø, Rasmus Leth Vergmann

2015-01-01

This article performs a comparative reading across a selection of seminal articles on Design based research in order to draw out and clarify key concepts that frame the approach. The article is a contribution to the ongoing discussion of how Design Based Research is or becomes a rigorous science....

Social Media Resources for Participative Design Research

OpenAIRE

Qaed, Fatema; Briggs, Jo; Cockton, Gilbert

2016-01-01

We present our experiences of novel value from online social media for Participative Design (PD) research. We describe how particular social media (e.g. Facebook, Pinterest, WhatsApp and Twitter) were used during a five-year project on learning space design by the researcher and interested teachers across all research phases (contextual review, user studies, PD action research). Social media were used to source and share comments, photographs and video documentation, supporting participation ...

EuropeaN Energy balance Research to prevent excessive weight Gain among Youth (ENERGY project: Design and methodology of the ENERGY cross-sectional survey

Directory of Open Access Journals (Sweden)

Moreno Luis

2011-01-01

Full Text Available Abstract Background Obesity treatment is by large ineffective long term, and more emphasis on the prevention of excessive weight gain in childhood and adolescence is warranted. To inform energy balance related behaviour (EBRB change interventions, insight in the potential personal, family and school environmental correlates of these behaviours is needed. Studies on such multilevel correlates of EBRB among schoolchildren in Europe are lacking. The ENERGY survey aims to (1 provide up-to-date prevalence rates of measured overweight, obesity, self-reported engagement in EBRBs, and objective accelerometer-based assessment of physical activity and sedentary behaviour and blood-sample biomarkers of metabolic function in countries in different regions of Europe, (2 to identify personal, family and school environmental correlates of these EBRBs. This paper describes the design, methodology and protocol of the survey. Method/Design A school-based cross-sectional survey was carried out in 2010 in seven different European countries; Belgium, Greece, Hungary, the Netherlands, Norway, Slovenia, and Spain. The survey included measurements of anthropometrics, child, parent and school-staff questionnaires, and school observations to measure and assess outcomes (i.e. height, weight, and waist circumference, EBRBs and potential personal, family and school environmental correlates of these behaviours including the social-cultural, physical, political, and economic environmental factors. In addition, a selection of countries conducted accelerometer measurements to objectively assess physical activity and sedentary behaviour, and collected blood samples to assess several biomarkers of metabolic function. Discussion The ENERGY survey is a comprehensive cross-sectional study measuring anthropometrics and biomarkers as well as assessing a range of EBRBs and their potential correlates at the personal, family and school level, among 10-12 year old children in seven

How to Construct a Mixed Methods Research Design.

Science.gov (United States)

Schoonenboom, Judith; Johnson, R Burke

2017-01-01

This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent design, and design complexity. There also are multiple secondary dimensions that need to be considered during the design process. We explain ten secondary dimensions of design to be considered for each research study. We also provide two case studies showing how the mixed designs were constructed.

A Polar Rover for Large-Scale Scientific Surveys: Design, Implementation and Field Test Results

Directory of Open Access Journals (Sweden)

Yuqing He

2015-10-01

Full Text Available Exploration of polar regions is of great importance to scientific research. Unfortunately, due to the harsh environment, most of the regions on the Antarctic continent are still unreachable for humankind. Therefore, in 2011, the Chinese National Antarctic Research Expedition (CHINARE launched a project to design a rover to conduct large-scale scientific surveys on the Antarctic. The main challenges for the rover are twofold: one is the mobility, i.e., how to make a rover that could survive the harsh environment and safely move on the uneven, icy and snowy terrain; the other is the autonomy, in that the robot should be able to move at a relatively high speed with little or no human intervention so that it can explore a large region in a limit time interval under the communication constraints. In this paper, the corresponding techniques, especially the polar rover's design and autonomous navigation algorithms, are introduced in detail. Subsequently, an experimental report of the fields tests on the Antarctic is given to show some preliminary evaluation of the rover. Finally, experiences and existing challenging problems are summarized.

FEDS : A Framework for Evaluation in Design Science Research

DEFF Research Database (Denmark)

Venable, John; Pries-Heje, Jan; Baskerville, Richard

2015-01-01

Evaluation of design artefacts and design theories is a key activity in Design Science Research (DSR), as it provides feedback for further development and (if done correctly) assures the rigour of the research. However, the extant DSR literature provides insufficient guidance on evaluation...... to enable Design Science Researchers to effectively design and incorporate evaluation activities into a DSR project that can achieve DSR goals and objectives. To address this research gap, this research paper develops, explicates, and provides evidence for the utility of a Framework for Evaluation in Design...... Science (FEDS) together with a process to guide design science researchers in developing a strategy for evaluating the artefacts they develop within a DSR project. A FEDS strategy considers why, when, how, and what to evaluate. FEDS includes a two-dimensional characterisation of DSR evaluation episodes...

SurveyWiz and factorWiz: JavaScript Web pages that make HTML forms for research on the Internet.

Science.gov (United States)

Birnbaum, M H

2000-05-01

SurveyWiz and factorWiz are Web pages that act as wizards to create HTML forms that enable one to collect data via the Web. SurveyWiz allows the user to enter survey questions or personality test items with a mixture of text boxes and scales of radio buttons. One can add demographic questions of age, sex, education, and nationality with the push of a button. FactorWiz creates the HTML for within-subjects, two-factor designs as large as 9 x 9, or higher order factorial designs up to 81 cells. The user enters levels of the row and column factors, which can be text, images, or other multimedia. FactorWiz generates the stimulus combinations, randomizes their order, and creates the page. In both programs HTML is displayed in a window, and the user copies it to a text editor to save it. When uploaded to a Web server and supported by a CGI script, the created Web pages allow data to be collected, coded, and saved on the server. These programs are intended to assist researchers and students in quickly creating studies that can be administered via the Web.

Farm survey design in the Sahel : Experiences from Burkina Faso

NARCIS (Netherlands)

Graaff, de J.; Mijl, van der J.P.; Nibbering, J.W.

1999-01-01

In designing farm household surveys in the Sahel in West Africa much attention should be paid to various specific features of the farming systems. These features relate in particular to the social organisation of the farming communities. Within households, kinship relations have a strong bearing on

The Design:Lab as platform in participatory design research

DEFF Research Database (Denmark)

Binder, Thomas; Brandt, Eva

2008-01-01

The notion of laboratory or simply 'lab' has become popular in recent years in areas outside science and technology development. Learning Labs, Innovation Labs, Usability Labs, Media and Communication Labs and even Art Labs designate institutions or fora dedicated to change and experimentation...... as others have frequently used other metaphors like workshop, studio or atelier in design research. In this article we will argue that the laboratory metaphor is particularly suitable and useful for the design:lab, and we will give examples of how we have worked with the design:lab as a platform...

Using Interdisciplinary and Active Research to Encourage Higher Resolution Research and Prototyping in Design

Directory of Open Access Journals (Sweden)

Adream Blair-Early

2014-10-01

Full Text Available University art and design programs are branching out and creating interdisciplinary programs and research centers that connect design students and faculty across various disciplines such as business, engineering, architecture, information studies, health sciences and education. A human-centered, problem-based approach to design research looks to position industry and academic leaders to work alongside students, community leaders, artists and non-profits to develop creative and innovative solutions to the challenges facing contemporary society. But product design benefits even more from practices that engage users throughout the entire design process, often called participatory design. Participatory design process utilizes user feedback throughout the design process to spur innovation and improve design quality. It is possible in the classroom to engage in participatory design and participatory prototyping through the use of inexpensive 3D printers and laser cutters as well as traditional hand tools, requiring only mastery of a few simple techniques and technology readily available on laptop computers. The class research being presented was conceived as part of a new interdisciplinary classroom research space call the Digital Craft Research Lab (DCRL housed within the department of Art and Design. Courses taught within the DCRL offer students, researchers and faculty continual access to both low resolution and high-resolution prototyping machinery and materials. This paper looks at the role of action and participatory research in a design course that created printed hand innovations in collaboration with a nine-year-old female user. Students were asked to work on modeling new designs as well as capturing the progress in a final open source book and models. This paper asks the question can the use of classroom collaboration, action research and work spaces encourage creativity, innovation, and critical thinking in student and professional

Practicalities of health survey fieldwork research in a resource ...

African Journals Online (AJOL)

Cite as: Abimanyi-Ochom J. Practicalities of health survey field work research in a resource limited setting: challenges and ... vided only ART while TASO provided social support in ..... first aid box in case of any minor accident but was limited.

Research Use in Education: An Online Survey of School Practitioners

Science.gov (United States)

Lysenko, Larysa V.; Abrami, Philip C.; Bernard, Robert M.; Dagenais, Christian

2015-01-01

This paper summarizes the results of a pan-Canadian online survey study that investigates the extent to which school practitioners (N = 1,153) use research to inform their practice. The self-reports indicate that the majority of the respondents used educational research, yet this engagement was infrequent. Although the respondents shared neutral…

Impacting Society through Engineering Design Research

DEFF Research Database (Denmark)

Howard, Thomas J.

2011-01-01

Following the recent ICED11 conference in Copenhagen, Thomas Howard, ICED11 Assistant Chair and Ass. Professor at DTU has written a reflection on design research and design practice, suggesting that in addition to benefiting society through the improved understanding of methods of and approaches...... to design, the academic design community should through design practice produce empowering products which address societal needs unbound by the necessity for profit....

The European Social Survey and European research policy

DEFF Research Database (Denmark)

Kropp, Kristoffer

2017-01-01

This article analyses the history of the European Social Survey (ESS) and its relationship to changes in European research policy, using Bourdieu’s field-analytical approach. It argues that the success of the ESS relied on three interwoven processes that we can understand theoretically in terms...... of the establishment of homological structures and the formation of conjunctural alliances between the field of European social-scientific research and the field of European policy. The three interwoven processes that I depict are: first, the production of a European field of social research, connected to both...... European and national scientific institutions; second, the establishment of European Union (EU) institutions and organisations that were able to identify and link up with social researchers; and third, the formation of conjunctural alliances between the two fields (social science and EU research policy...

Hit by a Perfect Storm? Art & Design in the National Student Survey

Science.gov (United States)

Yorke, Mantz; Orr, Susan; Blair, Bernadette

2014-01-01

There has long been the suspicion amongst staff in Art & Design that the ratings given to their subject disciplines in the UK's National Student Survey are adversely affected by a combination of circumstances--a "perfect storm". The "perfect storm" proposition is tested by comparing ratings for Art & Design with those…

Getting started in research: designing and preparing to conduct a research study.

Science.gov (United States)

Macfarlane, Matthew D; Kisely, Steve; Loi, Samantha; Macfarlane, Stephen; Merry, Sally; Parker, Stephen; Power, Brian; Siskind, Dan; Smith, Geoff; Looi, Jeffrey C

2015-02-01

To discuss common pitfalls and useful tips in designing a quantitative research study, the importance and process of ethical approval, and consideration of funding. Through careful planning, based on formulation of a research question, early career researchers can design and conduct quantitative research projects within the framework of the Scholarly Project or in their own independent projects. © The Royal Australian and New Zealand College of Psychiatrists 2014.

Simulating future uncertainty to guide the selection of survey designs for long-term monitoring

Science.gov (United States)

Garman, Steven L.; Schweiger, E. William; Manier, Daniel J.; Gitzen, Robert A.; Millspaugh, Joshua J.; Cooper, Andrew B.; Licht, Daniel S.

2012-01-01

A goal of environmental monitoring is to provide sound information on the status and trends of natural resources (Messer et al. 1991, Theobald et al. 2007, Fancy et al. 2009). When monitoring observations are acquired by measuring a subset of the population of interest, probability sampling as part of a well-constructed survey design provides the most reliable and legally defensible approach to achieve this goal (Cochran 1977, Olsen et al. 1999, Schreuder et al. 2004; see Chapters 2, 5, 6, 7). Previous works have described the fundamentals of sample surveys (e.g. Hansen et al. 1953, Kish 1965). Interest in survey designs and monitoring over the past 15 years has led to extensive evaluations and new developments of sample selection methods (Stevens and Olsen 2004), of strategies for allocating sample units in space and time (Urquhart et al. 1993, Overton and Stehman 1996, Urquhart and Kincaid 1999), and of estimation (Lesser and Overton 1994, Overton and Stehman 1995) and variance properties (Larsen et al. 1995, Stevens and Olsen 2003) of survey designs. Carefully planned, “scientific” (Chapter 5) survey designs have become a standard in contemporary monitoring of natural resources. Based on our experience with the long-term monitoring program of the US National Park Service (NPS; Fancy et al. 2009; Chapters 16, 22), operational survey designs tend to be selected using the following procedures. For a monitoring indicator (i.e. variable or response), a minimum detectable trend requirement is specified, based on the minimum level of change that would result in meaningful change (e.g. degradation). A probability of detecting this trend (statistical power) and an acceptable level of uncertainty (Type I error; see Chapter 2) within a specified time frame (e.g. 10 years) are specified to ensure timely detection. Explicit statements of the minimum detectable trend, the time frame for detecting the minimum trend, power, and acceptable probability of Type I error (�

The application of mixed methods designs to trauma research.

Science.gov (United States)

Creswell, John W; Zhang, Wanqing

2009-12-01

Despite the use of quantitative and qualitative data in trauma research and therapy, mixed methods studies in this field have not been analyzed to help researchers designing investigations. This discussion begins by reviewing four core characteristics of mixed methods research in the social and human sciences. Combining these characteristics, the authors focus on four select mixed methods designs that are applicable in trauma research. These designs are defined and their essential elements noted. Applying these designs to trauma research, a search was conducted to locate mixed methods trauma studies. From this search, one sample study was selected, and its characteristics of mixed methods procedures noted. Finally, drawing on other mixed methods designs available, several follow-up mixed methods studies were described for this sample study, enabling trauma researchers to view design options for applying mixed methods research in trauma investigations.

Academic Research Equipment in the Physical and Computer Sciences and Engineering. An Analysis of Findings from Phase I of the National Science Foundation's National Survey of Academic Research Instruments and Instrumentation Needs.

Science.gov (United States)

Burgdorf, Kenneth; White, Kristine

This report presents information from phase I of a survey designed to develop quantitative indicators of the current national stock, cost/investment, condition, obsolescence, utilization, and need for major research instruments in academic settings. Data for phase I (which focused on the physical and computer sciences and engineering) were…

Critical Race Design: An Emerging Methodological Approach to Anti-Racist Design and Implementation Research

Science.gov (United States)

Khalil, Deena; Kier, Meredith

2017-01-01

This article is about introducing Critical Race Design (CRD), a research methodology that centers race and equity at the nucleus of educational opportunities by design. First, the authors define design-based implementation research (DBIR; Penuel, Fishman, Cheng, & Sabelli, 2011) as an equity-oriented education research methodology where…

Nationwide survey on barriers for dental research in India

Directory of Open Access Journals (Sweden)

Kundendu Arya Bishen

2015-01-01

Full Text Available Objective: Research in the dental field is progressing at mightier speed worldwide, but an unfortunately representation of India at this platform is negligible. The present study was undertaken to unearth the barriers for dental research among dental professionals in Indian scenario. Materials and Methods: A cross-sectional questionnaire study was conducted on 1514 participant′s (Master of Dental Surgery and Bachelor of Dental Surgery staff and postgraduates in 40 dental colleges of India selected by multistage random sampling. The response rate was 75.7%. The survey was undertaken from July 2013 to December 2013. The survey instrument was 24-item, investigator developed, self-structured, close-ended, and self-administered questionnaire grouped into four categories that are, institutional/departmental support related barriers, financial/training support related barriers, time-related barriers, and general barriers. Results: Among all respondents 47.23% informed that they are administrative and educational work rather than research work as (P < 0.001. Overall 57.53% of study participants reported lack of administrative and technical support for research work as (P < 0.001. Overall 64.9% reported meager college funding was the barrier (P < 0.001. Overall 61.5% respondents reported lack of time to do research work due to clinical and teaching responsibilities (P < 0.001 was the barrier for research. Largely 80.25% agreed that, the lack of documentation and record maintenance are an obvious barrier for research (P < 0.001. Conclusions: Present study unearths certain barriers for research in an Indian scenario, which includes administrative overburden, lack of funds, and lack of documentation of the dental data. Governing authorities of dentistry in India have to make major interventions to make research non-intensive environment to research-friendly environment.

SABE Colombia: Survey on Health, Well-Being, and Aging in Colombia—Study Design and Protocol

Science.gov (United States)

Corchuelo, Jairo; Curcio, Carmen-Lucia; Calzada, Maria-Teresa; Mendez, Fabian

2016-01-01

Objective. To describe the design of the SABE Colombia study. The major health study of the old people in Latin America and the Caribbean (LAC) is the Survey on Health, Well-Being, and Aging in LAC, SABE (from initials in Spanish: SAlud, Bienestar & Envejecimiento). Methods. The SABE Colombia is a population-based cross-sectional study on health, aging, and well-being of elderly individuals aged at least 60 years focusing attention on social determinants of health inequities. Methods and design were similar to original LAC SABE. The total sample size of the study at the urban and rural research sites (244 municipalities) was 23.694 elderly Colombians representative of the total population. The study had three components: (1) a questionnaire covering active aging determinants including anthropometry, blood pressure measurement, physical function, and biochemical and hematological measures; (2) a subsample survey among family caregivers; (3) a qualitative study with gender and cultural perspectives of quality of life to understand different dimensions of people meanings. Conclusions. The SABE Colombia is a comprehensive, multidisciplinary study of the elderly with respect to active aging determinants. The results of this study are intended to inform public policies aimed at tackling health inequalities for the aging society in Colombia. PMID:27956896

Multipath Routing in Wireless Sensor Networks: Survey and Research Challenges

Science.gov (United States)

Radi, Marjan; Dezfouli, Behnam; Bakar, Kamalrulnizam Abu; Lee, Malrey

2012-01-01

A wireless sensor network is a large collection of sensor nodes with limited power supply and constrained computational capability. Due to the restricted communication range and high density of sensor nodes, packet forwarding in sensor networks is usually performed through multi-hop data transmission. Therefore, routing in wireless sensor networks has been considered an important field of research over the past decade. Nowadays, multipath routing approach is widely used in wireless sensor networks to improve network performance through efficient utilization of available network resources. Accordingly, the main aim of this survey is to present the concept of the multipath routing approach and its fundamental challenges, as well as the basic motivations for utilizing this technique in wireless sensor networks. In addition, we present a comprehensive taxonomy on the existing multipath routing protocols, which are especially designed for wireless sensor networks. We highlight the primary motivation behind the development of each protocol category and explain the operation of different protocols in detail, with emphasis on their advantages and disadvantages. Furthermore, this paper compares and summarizes the state-of-the-art multipath routing techniques from the network application point of view. Finally, we identify open issues for further research in the development of multipath routing protocols for wireless sensor networks. PMID:22368490

Multipath routing in wireless sensor networks: survey and research challenges.

Science.gov (United States)

Radi, Marjan; Dezfouli, Behnam; Abu Bakar, Kamalrulnizam; Lee, Malrey

2012-01-01

A wireless sensor network is a large collection of sensor nodes with limited power supply and constrained computational capability. Due to the restricted communication range and high density of sensor nodes, packet forwarding in sensor networks is usually performed through multi-hop data transmission. Therefore, routing in wireless sensor networks has been considered an important field of research over the past decade. Nowadays, multipath routing approach is widely used in wireless sensor networks to improve network performance through efficient utilization of available network resources. Accordingly, the main aim of this survey is to present the concept of the multipath routing approach and its fundamental challenges, as well as the basic motivations for utilizing this technique in wireless sensor networks. In addition, we present a comprehensive taxonomy on the existing multipath routing protocols, which are especially designed for wireless sensor networks. We highlight the primary motivation behind the development of each protocol category and explain the operation of different protocols in detail, with emphasis on their advantages and disadvantages. Furthermore, this paper compares and summarizes the state-of-the-art multipath routing techniques from the network application point of view. Finally, we identify open issues for further research in the development of multipath routing protocols for wireless sensor networks.

Mixed Methods Research Designs in Counseling Psychology

Science.gov (United States)

Hanson, William E.; Creswell, John W.; Clark, Vicki L. Plano; Petska, Kelly S.; Creswell, David J.

2005-01-01

With the increased popularity of qualitative research, researchers in counseling psychology are expanding their methodologies to include mixed methods designs. These designs involve the collection, analysis, and integration of quantitative and qualitative data in a single or multiphase study. This article presents an overview of mixed methods…

The Design and Validation of the Colorado Learning Attitudes about Science Survey

Science.gov (United States)

Adams, W. K.; Perkins, K. K.; Dubson, M.; Finkelstein, N. D.; Wieman, C. E.

2005-09-01

The Colorado Learning Attitudes about Science Survey (CLASS) is a new instrument designed to measure various facets of student attitudes and beliefs about learning physics. This instrument extends previous work by probing additional facets of student attitudes and beliefs. It has been written to be suitably worded for students in a variety of different courses. This paper introduces the CLASS and its design and validation studies, which include analyzing results from over 2400 students, interviews and factor analyses. Methodology used to determine categories and how to analyze the robustness of categories for probing various facets of student learning are also described. This paper serves as the foundation for the results and conclusions from the analysis of our survey data.

Research priorities in health communication and participation: international survey of consumers and other stakeholders.

Science.gov (United States)

Synnot, Anneliese; Bragge, Peter; Lowe, Dianne; Nunn, Jack S; O'Sullivan, Molly; Horvat, Lidia; Tong, Allison; Kay, Debra; Ghersi, Davina; McDonald, Steve; Poole, Naomi; Bourke, Noni; Lannin, Natasha; Vadasz, Danny; Oliver, Sandy; Carey, Karen; Hill, Sophie J

2018-05-08

To identify research priorities of consumers and other stakeholders to inform Cochrane Reviews in 'health communication and participation' (including such concepts as patient experience, shared decision-making and health literacy). International. We included anyone with an interest in health communication and participation. Up to 151 participants (18-80 years; 117 female) across 12 countries took part, including 48 consumers (patients, carers, consumer representatives) and 75 professionals (health professionals, policymakers, researchers) (plus 25 people who identified as both). Survey. We invited people to submit their research ideas via an online survey open for 4 weeks. Using inductive thematic analysis, we generated priority research topics, then classified these into broader themes. Participants submitted 200 research ideas, which we grouped into 21 priority topics. Key research priorities included: insufficient consumer involvement in research (19 responses), 'official' health information is contradictory and hard to understand (18 responses), communication/coordination breakdowns in health services (15 responses), health information provision a low priority for health professionals (15 responses), insufficient eliciting of patient preferences (14 responses), health services poorly understand/implement patient-centred care (14 responses), lack of holistic care impacting healthcare quality and safety (13 responses) and inadequate consumer involvement in service design (11 responses). These priorities encompassed acute and community health settings, with implications for policy and research. Priority populations of interest included people from diverse cultural and linguistic backgrounds, carers, and people with low educational attainment, or mental illness. Most frequently suggested interventions focused on training and cultural change activities for health services and health professionals. Consumers and other stakeholders want research addressing

Training cardiovascular outcomes researchers: A survey of mentees and mentors to identify critical training gaps and needs.

Science.gov (United States)

Khazanie, Prateeti; Al-Khatib, Sana M; Wang, Tracy Y; Crowley, Matthew J; Kressin, Nancy R; Krumholz, Harlan M; Kiefe, Catarina I; Wells, Barbara L; O'Brien, Sean M; Peterson, Eric D; Sanders, Gillian D

2018-02-01

Many young investigators are interested in cardiovascular (CV) outcomes research; however, the current training experience of early investigators across the United States is uncertain. From April to November 2014, we surveyed mentees and mentors of early-stage CV outcomes investigators across the United States. We contacted successful grantees of government agencies, members of professional organizations, and trainees in CV outcomes training programs. A total of 185 (of 662) mentees and 76 (of 541) mentors completed the survey. Mentees were equally split by sex; most had completed training >3 years before completing the survey and were clinicians. Mentors were more likely women, mostly ≥20 years posttraining, and at an associate/full professor rank. Mentors reported devoting more time currently to clinical work than when they were early in their career and mentoring 2-4 people simultaneously. More than 80% of mentees started training to become academicians and completed training with the same goal. More than 70% of mentees desired at least 50% research time in future jobs. More than 80% of mentors believed that future investigators would need more than 50% time dedicated to research. Most mentees (80%) were satisfied with their relationship with their mentor and reported having had opportunities to develop independently. Mentors more frequently than mentees reported that funding cutbacks had negatively affected mentees' ability to succeed (84% vs 58%). Across funding mechanisms, mentees were more optimistic than mentors about securing funding. Both mentees and mentors reported greatest preparedness for job/career satisfaction (79% for both) and publications (84% vs 92%) and least preparedness for future financial stability (48% vs 46%) and work-life balance (47% vs 42%). Survey findings may stimulate future discourse and research on how best to attract, train, and retain young investigators in CV outcomes research. Insights may help improve existing training

Single-Phase Mail Survey Design for Rare Population Subgroups

Science.gov (United States)

Brick, J. Michael; Andrews, William R.; Mathiowetz, Nancy A.

2016-01-01

Although using random digit dialing (RDD) telephone samples was the preferred method for conducting surveys of households for many years, declining response and coverage rates have led researchers to explore alternative approaches. The use of address-based sampling (ABS) has been examined for sampling the general population and subgroups, most…

Using the LOINC Semantic Structure to Integrate Community-based Survey Items into a Concept-based Enterprise Data Dictionary to Support Comparative Effectiveness Research.

Science.gov (United States)

Co, Manuel C; Boden-Albala, Bernadette; Quarles, Leigh; Wilcox, Adam; Bakken, Suzanne

2012-01-01

In designing informatics infrastructure to support comparative effectiveness research (CER), it is necessary to implement approaches for integrating heterogeneous data sources such as clinical data typically stored in clinical data warehouses and those that are normally stored in separate research databases. One strategy to support this integration is the use of a concept-oriented data dictionary with a set of semantic terminology models. The aim of this paper is to illustrate the use of the semantic structure of Clinical LOINC (Logical Observation Identifiers, Names, and Codes) in integrating community-based survey items into the Medical Entities Dictionary (MED) to support the integration of survey data with clinical data for CER studies.

Nuclear power and the public: an update of collected survey research on nuclear power

International Nuclear Information System (INIS)

Rankin, W.L.; Melber, B.D.; Overcast, T.D.; Nealey, S.M.

1981-12-01

The purpose of this research was to collect, analyze, and summarize all of the nuclear power-related surveys conducted in the United States through June 1981, that we could obtain. The surveys collected were national, statewide, and areawide in scope. Slightly over 100 surveys were collected for an earlier, similar effort carried out in 1977. About 130 new surveys were added to the earlier survey data. Thus, about 230 surveys were screened for inclusion in this report. Because of space limitations, national surveys were used most frequently in this report, followed distantly by state surveys. In drawing our conclusions about public beliefs and attitudes toward nuclear power, we placed most of our confidence in survey questions that were used by national polling firms at several points in time. A summary of the research findings is presented, beginning with general attitudes toward nuclear power, followed by a summary of beliefs and attitudes about nuclear power issues, and ended by a summary of beliefs and attitudes regarding more general energy issues

Nuclear power and the public: an update of collected survey research on nuclear power

Energy Technology Data Exchange (ETDEWEB)

Rankin, W.L.; Melber, B.D.; Overcast, T.D.; Nealey, S.M.

1981-12-01

The purpose of this research was to collect, analyze, and summarize all of the nuclear power-related surveys conducted in the United States through June 1981, that we could obtain. The surveys collected were national, statewide, and areawide in scope. Slightly over 100 surveys were collected for an earlier, similar effort carried out in 1977. About 130 new surveys were added to the earlier survey data. Thus, about 230 surveys were screened for inclusion in this report. Because of space limitations, national surveys were used most frequently in this report, followed distantly by state surveys. In drawing our conclusions about public beliefs and attitudes toward nuclear power, we placed most of our confidence in survey questions that were used by national polling firms at several points in time. A summary of the research findings is presented, beginning with general attitudes toward nuclear power, followed by a summary of beliefs and attitudes about nuclear power issues, and ended by a summary of beliefs and attitudes regarding more general energy issues.

Report on the Survey of the Design Review of New Reactor Applications. Volume 3: Reactor

International Nuclear Information System (INIS)

Downey, Steven; Monninger, John; Nevalainen, Janne; Lorin, Aurelie; ); Webster, Philip; Joyer, Philippe; Kawamura, Tomonori; Lankin, Mikhail; Kubanyi, Jozef; Haluska, Ladislav; Persic, Andreja; Reierson, Craig; Kang, Kyungmin; Kim, Walter

2016-01-01

At the tenth meeting of the CNRA Working Group on the Regulation of New Reactors (WGRNR) in March 2013, the Working Group agreed to present the responses to the Second Phase, or Design Phase, of the Licensing Process Survey as a multi-volume text. As such, each report will focus on one of the eleven general technical categories covered in the survey. The general technical categories were selected to conform to the topics covered in the International Atomic Energy Agency (IAEA) Safety Guide GS-G-4.1. This document, which is the third report on the results of the Design Phase Survey, focuses on the Reactor. The Reactor category includes the following technical topics: fuel system design, reactor internals and core support, nuclear design and core nuclear performance, thermal and hydraulic design, reactor materials, and functional design of reactivity control system. For each technical topic, the member countries described the information provided by the applicant, the scope and level of detail of the technical review, the technical basis for granting regulatory authorisation, the skill sets required and the level of effort needed to perform the review. Based on a comparison of the information provided by the member countries in response to the survey, the following observations were made: - Although the description of the information provided by the applicant differs in scope and level of detail among the member countries that provided responses, there are similarities in the information that is required. - All of the technical topics covered in the survey are reviewed in some manner by all of the regulatory authorities that provided responses. - Design review strategies most commonly used to confirm that the regulatory requirements have been met include document review and independent verification of calculations, computer codes, or models used to describe the design and performance of the core and the fuel. - It is common to consider operating experience and

A survey of snake-inspired robot designs

International Nuclear Information System (INIS)

Hopkins, James K; Spranklin, Brent W; Gupta, Satyandra K

2009-01-01

Body undulation used by snakes and the physical architecture of a snake body may offer significant benefits over typical legged or wheeled locomotion designs in certain types of scenarios. A large number of research groups have developed snake-inspired robots to exploit these benefits. The purpose of this review is to report different types of snake-inspired robot designs and categorize them based on their main characteristics. For each category, we discuss their relative advantages and disadvantages. This review will assist in familiarizing a newcomer to the field with the existing designs and their distinguishing features. We hope that by studying existing robots, future designers will be able to create new designs by adopting features from successful robots. The review also summarizes the design challenges associated with the further advancement of the field and deploying snake-inspired robots in practice. (topical review)

Design and Statistics in Quantitative Translation (Process) Research

DEFF Research Database (Denmark)

Balling, Laura Winther; Hvelplund, Kristian Tangsgaard

2015-01-01

Traditionally, translation research has been qualitative, but quantitative research is becoming increasingly important, especially in translation process research but also in other areas of translation studies. This poses problems to many translation scholars since this way of thinking...... is unfamiliar. In this article, we attempt to mitigate these problems by outlining our approach to good quantitative research, all the way from research questions and study design to data preparation and statistics. We concentrate especially on the nature of the variables involved, both in terms of their scale...... and their role in the design; this has implications for both design and choice of statistics. Although we focus on quantitative research, we also argue that such research should be supplemented with qualitative analyses and considerations of the translation product....

Containment design, performance criteria and research needs for advanced reactor designs

International Nuclear Information System (INIS)

Bagdi, G.; Ali, S.; Costello, J

2004-01-01

This paper points out some important shifts in the basic expectations in the performance requirements for containment structures and discusses the areas where the containment structure design requirements and acceptance criteria can be integrated with ultimate test based insights. Although there has not been any new reactor construction in the United States for over thirty years, several designs of evolutionary and advanced reactors have already been certified. Performance requirements for containment structures under design basis and severe accident conditions and explicit consideration of seismic margins have been used in the design certification process. In the United States, the containment structure design code is the American Society of Mechanical Engineers, Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NE-Class MC for the steel containment and Section III, Division 2 for reinforced and prestressed concrete reactor vessels and containments. This containment design code was based on the early concept of applying design basis internal pressure and associated load combinations that included the operating basis and safe shutdown earthquake ground motion. These early design criteria served the nuclear industry and the regulatory authorities in maintaining public health and safety. However, these early design criteria do not incorporate the performance criteria related to containment function in an integrated fashion. Research in large scale model testing of containment structures to failure from over pressurization and shake table testing using simulated ground motion, have produced insights related to failure modes and material behavior at failure. The results of this research provide the opportunity to integrate these observations into design and acceptance criteria. This integration process would identify 'gaps' in the present knowledge and future research needs. This knowledge base is important for gleaning risk-informed insights into

Design for Restoration: beyond the survey

Directory of Open Access Journals (Sweden)

Giovanni Carbonara

2015-01-01

Full Text Available  This new issue, that we can define special, marks an important change for DISEGNARECON (its transfer from the University of Bologna to the University of L’Aquila facing the topic of the Design for the Restoration in a way that is special too. Treated in fact - beside the outgoing editor in chief, Roberto Mingucci - by Mario Centofanti, who now assumes the responsibility for the magazine, and Giovanni Carbonara, which is definitely authoritative reference in the field. Sharing a strong interest for communicating the Restoration Project, they intended to indicate the substantial union of methods and objectives between the disciplines of architectural survey and of restoration, which makes the meaning of an aggregation now also institutionally formalized and particularly significant for the project on the existing architecture. 

Enhancing public involvement in assistive technology design research.

Science.gov (United States)

Williamson, Tracey; Kenney, Laurence; Barker, Anthony T; Cooper, Glen; Good, Tim; Healey, Jamie; Heller, Ben; Howard, David; Matthews, Martin; Prenton, Sarah; Ryan, Julia; Smith, Christine

2015-05-01

To appraise the application of accepted good practice guidance on public involvement in assistive technology research and to identify its impact on the research team, the public, device and trial design. Critical reflection and within-project evaluation were undertaken in a case study of the development of a functional electrical stimulation device. Individual and group interviews were undertaken with lay members of a 10 strong study user advisory group and also research team members. Public involvement was seen positively by research team members, who reported a positive impact on device and study designs. The public identified positive impact on confidence, skills, self-esteem, enjoyment, contribution to improving the care of others and opportunities for further involvement in research. A negative impact concerned the challenge of engaging the public in dissemination after the study end. The public were able to impact significantly on the design of an assistive technology device which was made more fit for purpose. Research team attitudes to public involvement were more positive after having witnessed its potential first hand. Within-project evaluation underpins this case study which presents a much needed detailed account of public involvement in assistive technology design research to add to the existing weak evidence base. The evidence base for impact of public involvement in rehabilitation technology design is in need of development. Public involvement in co-design of rehabilitation devices can lead to technologies that are fit for purpose. Rehabilitation researchers need to consider the merits of active public involvement in research.

Feed-pump hydraulic performance and design improvement, Phase I: research program design. Final report

Energy Technology Data Exchange (ETDEWEB)

Brown, W.H.; Gopalakrishnan, S.; Fehlau, R.; Thompson, W.E.; Wilson, D.G.

1982-03-01

As a result of prior EPRI-sponsored studies, it was concluded that a research program should be designed and implemented to provide an improved basis for the design, procurement, testing, and operation of large feed pumps with increased reliability and stability over the full range of operating conditions. This two-volume report contains a research plan which is based on a review of the present state of the art and which defines the necessary R and D program and estimates the benefits and costs of the program. The recommended research program consists of 30 interrelated tasks. It is designed to perform the needed research; to verify the results; to develop improved components; and to publish computer-aided design methods, pump specification guidelines, and a troubleshooting manual. Most of the technology proposed in the research plan is applicable to nuclear power plants as well as to fossil-fired plants. This volume discusses the design, performance and failures of feed pumps, and recommendations for research on pump dynamics, design, and specifications.

Review of research in feature based design

NARCIS (Netherlands)

Salomons, O.W.; van Houten, Frederikus J.A.M.; Kals, H.J.J.

1993-01-01

Research in feature-based design is reviewed. Feature-based design is regarded as a key factor towards CAD/CAPP integration from a process planning point of view. From a design point of view, feature-based design offers possibilities for supporting the design process better than current CAD systems

Environmental survey at Lucas Heights Research Laboratories, 1989

International Nuclear Information System (INIS)

Hoffman, E.L.; Arthur, J.

1990-09-01

Results are presented of an environmental survey conducted in the neighbourhood of the Lucas Heights Research Laboratories during 1989. No radioactivity which could have originated from these laboratories was found in samples collected from possible human food chains. All low-level liquid and gaseous waste discharges were within authorised limits. The maximum possible annual dose to the general public from airborne waste during this period is estimated to be less than 0.01 millisieverts, which is one per cent of the limit for long-term exposure that is recommended by the National Health and Medical Research Council. 9 refs., 17 tabs., 2 figs

Environmental survey at Lucas Heights Research Laboratories, 1990

International Nuclear Information System (INIS)

Hoffmann, E.L.

1991-10-01

Results are presented of an environmental survey conducted in the neighbourhood of the Lucas Heights Research Laboratories during 1990. No radioactivity which could have originated from these laboratories was found in samples collected from possible human food chains. All low-level liquid and gaseous waste discharges were within authorised limits. The maximum possible annual dose to the general public from airborne waste during this period is estimated to be less than 0.01 millisieverts, which is one per cent of the limit for long-term exposure that is recommended by the National Health and Medical Research Council. 11 refs., 16 tabs., 2 figs

Environmental survey at Lucas Heights Research Laboratories, 1987

International Nuclear Information System (INIS)

Giles, M.S.; Foy, J.J.; Hoffmann, E.L.

1989-12-01

Results are presented of an environmental survey conducted in the neighbourhood of the Lucas Heights Research Laboratories during 1987. No radioactivity which could have originated from these laboratories was found in samples collected from possible human food chains. All low-level liquid and gaseous waste discharges were within authorized limits. The maximum possible annual dose to the general public from airborne waste during this period is estimated to be less than 0.01 millisieverts, which is one per cent of the limit for long-term exposure that is recommended by the National Health and Medical Research Council. 9 refs., 18 tabs., 2 figs

Environmental survey at Lucas Heights Research Laboratories, 1984

International Nuclear Information System (INIS)

Giles, M.S.; Dudaitis, A.

1986-12-01

Results are presented of the environmental survey conducted in the neighbourhood of the Lucas Heights Research Laboratories during 1984. These results are satisfactory. No radioactivity which could have originated from these laboratories was found in samples collected from possible human food chains. All low-level liquid and gaseous waste discharges were within authorised limits. The maximum possible annual dose to the general public from airborne waste discharges during this period is estimated to be less than 0.01 millisieverts, which is one per cent of the limit for long-term exposure that is recommended by the National Health and Medical Research Council

Data-driven engineering design research: Opportunities using open data

DEFF Research Database (Denmark)

Parraguez Ruiz, Pedro; Maier, Anja

2017-01-01

the already available and continuously growing body of open data sources to create opportunities for research in Engineering Design. Insights are illustrated by an examination of two examples: a study of open source software repositories and an analysis of open business registries in the cleantech industry....... We conclude with a discussion about the limitations, challenges and risks of using open data in Engineering Design research and practice.......Engineering Design research relies on quantitative and qualitative data to describe design-related phenomena and prescribe improvements for design practice. Given data availability, privacy requirements and other constraints, most empirical data used in Engineering Design research can be described...

Designing, Testing, and Validating an Attitudinal Survey on an Environmental Topic: A Groundwater Pollution Survey Instrument for Secondary School Students

Science.gov (United States)

Lacosta-Gabari, Idoya; Fernandez-Manzanal, Rosario; Sanchez-Gonzalez, Dolores

2009-01-01

Research in environmental attitudes' assessment has significantly increased in recent years. The development of specific attitude scales for specific environmental problems has often been proposed. This paper describes the Groundwater Pollution Test (GPT), a 19-item survey instrument using a Likert-type scale. The survey has been used with…

Proper survey methods for research of aquatic plant ecology and management

Science.gov (United States)

Proper survey methods are essential for objective, quantitative assessment of the distribution and abundance of aquatic plants as part of research and demonstration efforts. For research, the use of the appropriate method is an essential part of the scientific method, to ensure that the experimenta...

Designing intervention in educational game research

DEFF Research Database (Denmark)

Sørensen, Birgitte Holm; Magnussen, Rikke

2010-01-01

of game technology in educational settings: the game Global Conflict: Latin America, which is a role-playing game, set in a 3D environment. In the game, students play a freelance journalist who has to investigate particular issues or conflicts in the Latin American region. The game is designed to teach......The international focus on the learning potential of games in recent years has led to a boost in both academic research interest and the development of game formats. Numerous educational computer games are available for today’s teachers, but the implementation of games in everyday teaching is often...... problematic. In this paper, we argue that the focus on designing and implementing game-based learning environments in educational settings implies a need to rethink methodological questions on how to apply and study educational designs. We review the methodological approaches of design-based research...

Designing intervention in educational game research

DEFF Research Database (Denmark)

Magnussen, Rikke; Sørensen, Birgitte Holm

2010-01-01

of game technology in educational settings: the game Global Conflict: Latin America, which is a role-playing game, set in a 3D environment. In the game, students play a freelance journalist who has to investigate particular issues or conflicts in the Latin American region. The game is designed to teach......The international focus on the learning potential of games in recent years has led to a boost in both academic research interest and the development of game formats. Numerous educational computer games are available for today's teachers, but the implementation of games in everyday teaching is often...... problematic. In this paper, we argue that the focus on designing and implementing game-based learning environments in educational settings implies a need to rethink methodological questions on how to apply and study educational designs. We review the methodological approaches of design-based research...

Mediation designs for tobacco prevention research

Science.gov (United States)

MacKinnon, David P.; Taborga, Marcia P.; Morgan-Lopez, Antonio A.

2010-01-01

This paper describes research designs and statistical analyses to investigate how tobacco prevention programs achieve their effects on tobacco use. A theoretical approach to program development and evaluation useful for any prevention program guides the analysis. The theoretical approach focuses on action theory for how the program affects mediating variables and on conceptual theory for how mediating variables are related to tobacco use. Information on the mediating mechanisms by which tobacco prevention programs achieve effects is useful for the development of efficient programs and provides a test of the theoretical basis of prevention efforts. Examples of these potential mediating mechanisms are described including mediated effects through attitudes, social norms, beliefs about positive consequences, and accessibility to tobacco. Prior research provides evidence that changes in social norms are a critical mediating mechanism for successful tobacco prevention. Analysis of mediating variables in single group designs with multiple mediators are described as well as multiple group randomized designs which are the most likely to accurately uncover important mediating mechanisms. More complicated dismantling and constructive designs are described and illustrated based on current findings from tobacco research. Mediation analysis for categorical outcomes and more complicated statistical methods are outlined. PMID:12324176

Quantitative research.

Science.gov (United States)

Watson, Roger

2015-04-01

This article describes the basic tenets of quantitative research. The concepts of dependent and independent variables are addressed and the concept of measurement and its associated issues, such as error, reliability and validity, are explored. Experiments and surveys – the principal research designs in quantitative research – are described and key features explained. The importance of the double-blind randomised controlled trial is emphasised, alongside the importance of longitudinal surveys, as opposed to cross-sectional surveys. Essential features of data storage are covered, with an emphasis on safe, anonymous storage. Finally, the article explores the analysis of quantitative data, considering what may be analysed and the main uses of statistics in analysis.

Appalachian National Scenic Trail pilot survey

Science.gov (United States)

Stan Zarnoch; Michael Bowker; Ken Cordell; Matt Owens; Gary T. Green; Allison Ginn

2011-01-01

Visitation statistics on the Appalachian National Scenic Trail (AT) are important for management and Federal Government reporting purposes. However, no survey methodology has been developed to obtain accurate trailwide estimates over linear trails that traverse many hundreds of back-country miles. This research develops a stratified random survey design which utilizes...

Research Resources Survey: Radiology Junior Faculty Development.

Science.gov (United States)

Krupinski, Elizabeth A; Votaw, John R

2015-07-01

To assess resources available to junior faculty in US academic radiology departments for research mentorship and funding opportunities and to determine if certain resources are more common in successful programs. An anonymous survey covering scientific environment and research mentorship and was sent to vice-chairs of research of radiology departments. Results were evaluated to identify practices of research programs with respect to mentorship, resources, and opportunities. Academy of Radiology Research's 2012 National Institutes of Health (NIH) grants and awards list was used to determine if environment and practices correlate with funding. There was a 51% response rate. A greater fraction of clinical faculty gets promoted from assistant to associate professor than research faculty. Research faculty overall submits more funding applications. Most programs support start-up costs and K-awards. Over half of the departments have a vice-chair for faculty development, and most have formal mentorship programs. Faculty members are expected to teach, engage in service, publish, and apply for and get research funding within 3 years of hire. Top-tier programs as judged by NIH awards have a combination of MDs who devote >50% effort to research and PhD faculty. Key factors holding back both clinical and research junior faculty development were motivation, resources, and time, although programs reported high availability of resources and support at the department level. Better marketing of resources for junior faculty, effort devoted to mentoring clinical faculty in research, and explicit milestones/expectations for achievement could enhance junior faculty success, promote interest in the clinician–scientist career path for radiologists, and lead to greater research success.

The Army Communications Objectives Measurement System (ACOMS): Survey Design

Science.gov (United States)

1988-04-01

tiveness, assessments of advertising strategy efficiencies, management of the advertising program, and planning and development of new marketing strategies... advertising strategy and market segmentation. The ACOMS development effort has focused on specifying the design and analysis plan for the survey...second set of goals involves the use of ACOMS data to assess the Army’s advertising strategy . ACOMS is examining the extent to which the Army’s in

How to Construct a Mixed Methods Research Design

OpenAIRE

Schoonenboom, Judith; Johnson, R. Burke

2017-01-01

This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent desig...

Queering Participatory Design Research

Science.gov (United States)

McWilliams, Jacob

2016-01-01

This article offers a way forward for educators and researchers interested in drawing on the principles of "queer theory" to inform participatory design. In this article, I aim to achieve two related goals: To introduce new concepts within a critical conceptual practice of questioning and challenging the "heterosexual matrix"…

Understandings of the Concept of Iteration in Design-Based Research

DEFF Research Database (Denmark)

Gundersen, Peter Bukovica

2017-01-01

The paper is the first in a series of papers addressing design in Design-based research. The series looks into the question of how this research approach is connected to design. What happens when educational researchers adopt designerly ways of working? This paper provides an overview of design......-based research and from there on discuss one key characteristic, namely iterations, which are fundamental to educational design research in relation to how designers operate and why. The paper concludes that in general iteration is not a particularly well-described aspect in the reporting of DBR-projects. Half...... and usually after long periods of testing design solutions in practice....

Survey of organizational research climates in three research intensive, doctoral granting universities.

Science.gov (United States)

Wells, James A; Thrush, Carol R; Martinson, Brian C; May, Terry A; Stickler, Michelle; Callahan, Eileen C; Klomparens, Karen L

2014-12-01

The Survey of Organizational Research Climate (SOuRCe) is a new instrument that assesses dimensions of research integrity climate, including ethical leadership, socialization and communication processes, and policies, procedures, structures, and processes to address risks to research integrity. We present a descriptive analysis to characterize differences on the SOuRCe scales across departments, fields of study, and status categories (faculty, postdoctoral scholars, and graduate students) for 11,455 respondents from three research-intensive universities. Among the seven SOuRCe scales, variance explained by status and fields of study ranged from 7.6% (Advisor-Advisee Relations) to 16.2% (Integrity Norms). Department accounted for greater than 50% of the variance explained for each of the SOuRCe scales, ranging from 52.6% (Regulatory Quality) to 80.3% (Integrity Inhibitors). It is feasible to implement this instrument in large university settings across a broad range of fields, department types, and individual roles within academic units. Published baseline results provide initial data for institutions using the SOuRCe who wish to compare their own research integrity climates. © The Author(s) 2014.

Utilization of MCNP code in the research and design for China advanced research reactor

International Nuclear Information System (INIS)

Shen Feng

2006-01-01

MCNP, which is the internationalized neutronics code, is used for nuclear research and design in China Advanced Research Reactor (CARR). MCNP is an important neutronics code in the research and design for CARR since many calculation tasks could be undertaken by it. Many nuclear parameters on reactor core, the design and optimization research for many reactor utilizations, much verification for other nuclear calculation code and so on are conducted with help of MCNP. (author)

Research on the Danish Longitudinal Survey of Children (DALSC) at the Danish National Centre for Social Research

DEFF Research Database (Denmark)

Ottosen, Mai Heide

2011-01-01

This article reviews research results obtained using the Danish Longitudinal Survey of Children born in 1995 (DALSC), which is placed at SFI, the Danish National Centre for Social Research. DALSC aims to gain insight into children’s growing-up conditions in contemporary society. DALSC consists of...

Reconceptualizing Design Research in the Age of Mobile Learning

Science.gov (United States)

Bannan, Brenda; Cook, John; Pachler, Norbert

2016-01-01

The purpose of this paper is to begin to examine how the intersection of mobile learning and design research prompts the reconceptualization of research and design individually as well as their integration appropriate for current, complex learning environments. To fully conceptualize and reconceptualize design research in mobile learning, the…

Survey, design, development, and installation of micro hydel power generation

International Nuclear Information System (INIS)

Ijaz, M.

2011-01-01

This paper presents the survey, design, development and installation Of micro hydel power generation using low head Kaplan water turbine. Electricity production from hydro power has been and still is today, the first renewable source used to generate electricity. The development of energy from renewable is very important step in reduction of carbon emissions(CO/sub 2/).

Survey on Cooled-Vessel Designs in High Temperature Gas-Cooled Reactors

International Nuclear Information System (INIS)

Kim, Min-Hwan; Lee, Won-Jae

2006-01-01

The core outlet temperature of the coolant in the high temperature gas-cooled reactors (HTGR) has been increased to improve the overall efficiency of their electricity generation by using the Brayton cycle or their nuclear hydrogen production by using thermo-chemical processes. The increase of the outlet temperature accompanies an increase of the coolant inlet temperature. A high coolant inlet temperature results in an increase of the reactor pressure vessel (RPV) operation temperature. The conventional steels, proven vessel material in light water reactors, cannot be used as materials for the RPV in the elevated temperatures which necessitate its design to account for the creep effects. Some ferritic or martensitic steels like 2 1/4Cr-1Mo and 9Cr-1Mo-V are very well established creep resistant materials for a temperature range of 400 to 550 C. Although these materials have been used in a chemical plant, there is limited experience with using these materials in nuclear reactors. Even though the 2 1/4Cr-1Mo steel was used to manufacture the RPV for HTR-10 of Japan Atomic Energy Agency(JAEA), a large RPV has not been manufactured by using this material or 9Cr-1Mo-V steel. Due to not only its difficulties in manufacturing but also its high cost, the JAEA determined that they would exclude these materials from the GTHTR design. For the above reasons, KAERI has been considering a cooled-vessel design as an option for the RPV design of a NHDD plant (Nuclear Hydrogen Development and Demonstration). In this study, we surveyed several HTGRs, which adopt the cooled-vessel concept for their RPV design, and discussed their design characteristics. The survey results in design considerations for the NHDD cooled-vessel design

Research in Architecture & Design, Aalborg University 2009-2012

DEFF Research Database (Denmark)

Publication, presenting the research at Architecture & Design, Department of Architecture & Mediea Technology 2009-2012. Editor Gitte Marling......Publication, presenting the research at Architecture & Design, Department of Architecture & Mediea Technology 2009-2012. Editor Gitte Marling...

Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys

OpenAIRE

Hund, Lauren; Bedrick, Edward J.; Pagano, Marcello

2015-01-01

Lot quality assurance sampling (LQAS) surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we comp...

Preliminary Geological Survey on the Proposed Sites for the New Research Reactor

International Nuclear Information System (INIS)

Lim, In Cheol; Ha, J. J.; Oh, K. B.

2010-12-01

· Performing the preliminary geological survey on the proposed sites for the new research reactor through the technical service · Ordering a technical service from The Geological Society of Korea · Contents of the geological survey - Confirmation of active fault - Confirmation of a large-scale fracture zone or weak zone - Confirmation of inappropriate items related to the underground water - Confirmation of historical seismicity and instrumental earthquakes data · Synthesized analysis and holding a report meeting · Results of the geological survey - Confirmation of the geological characteristics of the sites and drawing the requirements for the precise geological survey in the future

Action Design Research for Social Innovation: Lessons from Designing a Health and Wellbeing Platform

NARCIS (Netherlands)

de Reuver, G.A.; Keijzer-Broers, W.J.W.

2016-01-01

IT artifacts play an important role in solving societal problems and realizing social innovations. Existing practice-inspired design science research (DSR) approaches, such as Action Design Research (ADR), do not consider social innovation as an explicit starting point for design iterations. In this

Complex surveys analysis of categorical data

CERN Document Server

Mukhopadhyay, Parimal

2016-01-01

The primary objective of this book is to study some of the research topics in the area of analysis of complex surveys which have not been covered in any book yet. It discusses the analysis of categorical data using three models: a full model, a log-linear model and a logistic regression model. It is a valuable resource for survey statisticians and practitioners in the field of sociology, biology, economics, psychology and other areas who have to use these procedures in their day-to-day work. It is also useful for courses on sampling and complex surveys at the upper-undergraduate and graduate levels. The importance of sample surveys today cannot be overstated. From voters’ behaviour to fields such as industry, agriculture, economics, sociology, psychology, investigators generally resort to survey sampling to obtain an assessment of the behaviour of the population they are interested in. Many large-scale sample surveys collect data using complex survey designs like multistage stratified cluster designs. The o...

Research Design in the study of the European Neighbourhood Policy

DEFF Research Database (Denmark)

Exadaktylos, Theofanis; Lynggaard, Kennet

2017-01-01

This chapter deals with the pitfalls and pathways of research design aimed at the study of the European Neighbourhood Policy (ENP) and maps out the literature on questions of knowledge ambition, research ontology and epistemology, and choices of approaches to the research object. We include...... a review of traditional research designs in ENP research, through a systematic meta-analysis of a selection of the most-cited articles on the ENP. Inspired by earlier work on awareness of research design in EU studies, ENP research is categorised according to typical choices of research design in the form...... of dichotomous trade-offs. The chapter then discusses how individual contributions to this volume deal with research design challenges of the past and present innovative ways of studying the revised ENP....

NASA Space Engineering Research Center for VLSI systems design

Science.gov (United States)

1991-01-01

This annual review reports the center's activities and findings on very large scale integration (VLSI) systems design for 1990, including project status, financial support, publications, the NASA Space Engineering Research Center (SERC) Symposium on VLSI Design, research results, and outreach programs. Processor chips completed or under development are listed. Research results summarized include a design technique to harden complementary metal oxide semiconductors (CMOS) memory circuits against single event upset (SEU); improved circuit design procedures; and advances in computer aided design (CAD), communications, computer architectures, and reliability design. Also described is a high school teacher program that exposes teachers to the fundamentals of digital logic design.

Surveying the Field: The Research Model of Women in Librarianship, 1882-1898

Science.gov (United States)

McDowell, Kate

2009-01-01

Women who promoted library services to children in the United States in the late nineteenth century introduced the systematic use of survey research on library practice to the field of professional librarianship. They created a series of qualitative survey-based reports, the "Reading of the Young" reports, which were presented at ALA conferences…

Infusing Qualitative Traditions in Counseling Research Designs

Science.gov (United States)

Hays, Danica G.; Wood, Chris

2011-01-01

Research traditions serve as a blueprint or guide for a variety of design decisions throughout qualitative inquiry. This article presents 6 qualitative research traditions: grounded theory, phenomenology, consensual qualitative research, ethnography, narratology, and participatory action research. For each tradition, the authors describe its…

Report on the project on the researcher dispatch type international joint research survey. International joint research for creation of new industries; Kenkyusha hakengata kokusai kyodo kenkyu chosa jigyo. Shinki sangyo soshutsu kokusai kyodo kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of digging up themes of the joint research which develop the R and D in the industrial field in Japan to a new stage, researchers were dispatched to the world representing research institutes to make the research study. As to the survey of the trend of bio-informatics research, visits for survey were paid by 8 researchers to 19 research institutes in the U.S., Australia, France and Germany, and survey was made of the state of new researches such as the genetic network analysis by DNA chip data. Relating to the survey of the trend of the plan for ape genomic DNA sequence, visits for survey were paid by 6 researchers to 12 research institutes in Japan, Germany, France and the U.K. Concerning the research survey with aim of developing the selective reversible expression technology of target genes, researchers were dispatched to St. Jude Children's Research Hospital in the U.S. to conduct the following: construction of basic expression vectors, functional evaluation using cultured cells, making of the transgenic mice to which medicine dependent and cell peculiar expression control genes were introduced, analytical study of the situation of expression control, etc. (NEDO)

The Role of Hypothesis in Constructive Design Research

DEFF Research Database (Denmark)

Bang, Anne Louise; Krogh, Peter; Ludvigsen, Martin

2012-01-01

and solid perspective on how to keep constructive design research on track, this paper offers a model for understanding the role of hypothesis in constructive design research. The model allows for understanding the hypothesis’s relation to research motivation, questions, experiments, evaluation...... and knowledge production. The intention of the model is to have it serve as a tool in the research process aiding the researcher to understand at what “level” discussions and claims are brought forward, and what consequences these might have for the research work at hand. Thus, the paper claims the central...

Radiological survey of the former Kellex Research Facility, Jersey City, New Jersey

International Nuclear Information System (INIS)

Berven, B.A.; Dickson, H.W.; Goldsmith, W.A.; Johnson, W.M.; Cottrell, W.D.; Doane, R.W.; Haywood, F.F.; Ryan, M.T.; Shinpaugh, W.H.

1982-02-01

A radiological survey has been conducted at the site of the former Kellex Corporation Research Facility in Jersey City, New Jersey. Kellex played a major role in the Manhattan Project, particularly in the area of engineering research in gaseous diffusion for uranium enrichment. As a result of those operations and subsequent work with radioactive materials, this site was selected for a radiological survey by the Department of Energy (DOE) [then Energy Research and Development Administration (ERDA)] in its program aimed at reviewing and documenting the radiological status of properties associated with early source material contracts. The survaty included measurement of external gamma radiation, beta-gamma surface dose rates, alpha and beta surface contamination, concentrations of selected radionuclides in surface and subsurface soil and water on the site, and background radiation in the northern part of New Jersey. The results of the radiological survey indicate radionuclide concentrations in the soil and water on the former Kellex property are within background levels, with the exception of nine isolated and well-defined areas on the site of the former Kellex Laboratory

Using Person Fit Statistics to Detect Outliers in Survey Research

Directory of Open Access Journals (Sweden)

John M. Felt

2017-05-01

Full Text Available Context: When working with health-related questionnaires, outlier detection is important. However, traditional methods of outlier detection (e.g., boxplots can miss participants with “atypical” responses to the questions that otherwise have similar total (subscale scores. In addition to detecting outliers, it can be of clinical importance to determine the reason for the outlier status or “atypical” response.Objective: The aim of the current study was to illustrate how to derive person fit statistics for outlier detection through a statistical method examining person fit with a health-based questionnaire.Design and Participants: Patients treated for Cushing's syndrome (n = 394 were recruited from the Cushing's Support and Research Foundation's (CSRF listserv and Facebook page.Main Outcome Measure: Patients were directed to an online survey containing the CushingQoL (English version. A two-dimensional graded response model was estimated, and person fit statistics were generated using the Zh statistic.Results: Conventional outlier detections methods revealed no outliers reflecting extreme scores on the subscales of the CushingQoL. However, person fit statistics identified 18 patients with “atypical” response patterns, which would have been otherwise missed (Zh > |±2.00|.Conclusion: While the conventional methods of outlier detection indicated no outliers, person fit statistics identified several patients with “atypical” response patterns who otherwise appeared average. Person fit statistics allow researchers to delve further into the underlying problems experienced by these “atypical” patients treated for Cushing's syndrome. Annotated code is provided to aid other researchers in using this method.

Design research through practice : from the lab, field, and showroom

NARCIS (Netherlands)

Koskinen, I.; Zimmerman, J.; Binder, T.; Redström, J.; Wensveen, S.A.G.

2011-01-01

Businesses and the HCI and Interaction Design communities have embraced design and design research. Design research as a field blends methodologies from several disciplines - sociology, engineering, software, philosophy, industrial design, HCI/interaction design -- so designers can learn from past

Developing questionnaires for educational research: AMEE Guide No. 87

Science.gov (United States)

La Rochelle, Jeffrey S.; Dezee, Kent J.; Gehlbach, Hunter

2014-01-01

In this AMEE Guide, we consider the design and development of self-administered surveys, commonly called questionnaires. Questionnaires are widely employed in medical education research. Unfortunately, the processes used to develop such questionnaires vary in quality and lack consistent, rigorous standards. Consequently, the quality of the questionnaires used in medical education research is highly variable. To address this problem, this AMEE Guide presents a systematic, seven-step process for designing high-quality questionnaires, with particular emphasis on developing survey scales. These seven steps do not address all aspects of survey design, nor do they represent the only way to develop a high-quality questionnaire. Instead, these steps synthesize multiple survey design techniques and organize them into a cohesive process for questionnaire developers of all levels. Addressing each of these steps systematically will improve the probabilities that survey designers will accurately measure what they intend to measure. PMID:24661014

Research on an innovative design model

Science.gov (United States)

Fu, Y.; Fang, H.

2018-03-01

The design methods of furniture are different from east to west; it has been the hotspot of the scholars. However, in terms of the theory of modern design innovation, neither the early creation theory, the modern design theory, nor the widely applied TRIZ theory can fully fit the modern furniture design innovation, so it is urgent to study the modern furniture design theory. This paper is based on the idea of TRIZ theory, using lots of literatures as data, and uses the method of statistical stratification to analyze and sort out the research of modern sitting equipment, and finally put forward the modern furniture design model, which provides new ideas and perspectives for the modern design of Chinese furniture.

Attending to Objects as Outcomes of Design Research

DEFF Research Database (Denmark)