WorldWideScience

Sample records for survey instrument design

  1. Mechanical Design of NESSI: New Mexico Tech Extrasolar Spectroscopic Survey Instrument

    Science.gov (United States)

    Santoro, Fernando G.; Olivares, Andres M.; Salcido, Christopher D.; Jimenez, Stephen R.; Jurgenson, Colby A.; Hrynevych, Michael A.; Creech-Eakman, Michelle J.; Boston, Penny J.; Schmidt, Luke M.; Bloemhard, Heather; Rodeheffer, Dan; Vaive, Genevieve; Vasisht, Gautam; Swain, Mark R.; Deroo, Pieter

    2011-01-01

    NESSI: the New Mexico Tech Extrasolar Spectroscopic Survey Instrument is a ground-based multi-object spectrograph that operates in the near-infrared. It will be installed on one of the Nasmyth ports of the Magdalena Ridge Observatory (MRO) 2.4-meter Telescope sited in the Magdalena Mountains, about 48 km west of Socorro-NM. NESSI operates stationary to the telescope fork so as not to produce differential flexure between internal opto-mechanical components during or between observations. An appropriate mechanical design allows the instrument alignment to be highly repeatable and stable for both short and long observation timescales, within a wide-range of temperature variation. NESSI is optically composed of a field lens, a field de-rotator, re-imaging optics, an auto-guider and a Dewar spectrograph that operates at LN2 temperature. In this paper we report on NESSI's detailed mechanical and opto-mechanical design, and the planning for mechanical construction, assembly, integration and verification.

  2. Ergonomics and design of laparoscopic instruments: results of a survey among laparoscopic surgeons.

    Science.gov (United States)

    Van Veelen, M A; Meijer, D W

    1999-12-01

    This study determined which types of laparoscopic instruments are most often used in Europe, why they are being used, and what problems exist while using the instruments. The handles were also evaluated according to ergonomic design criteria. A questionnaire was send to 62 experienced surgeons in 19 countries. The laparoscopic instruments were divided into four groups: instruments with similar functionality and handgrip model were grouped together. Eight questions were asked for every group about the type of instrument (disposable, reusable, or semireusable), the type of handle, the reason for using a specific instrument, and the experience of discomfort while using the instrument. The handles of the instruments of the group that were associated with the greatest discomfort were ergonomically evaluated on eight aspects (dimensions, angles, and control). Half of the questionnaires were returned. In every group, about 80% of the instruments the surgeons employed were reusable. The chief reason for using a specific type was the good cost-quality of the product and satisfying experiences with other products of the brand. The discomfort was pressure on thumb and fingers (scissors handle) and fixating the tip (ratchet). The handle of the instruments that causes the most discomfort met only three of the eight ergonomic requirements. Most of the laparoscopic instruments employed by surgeons in Europe are reusable. A significant number of the instruments cause discomfort. These instruments do not meet standard ergonomic requirements.

  3. Designing, Testing, and Validating an Attitudinal Survey on an Environmental Topic: A Groundwater Pollution Survey Instrument for Secondary School Students

    Science.gov (United States)

    Lacosta-Gabari, Idoya; Fernandez-Manzanal, Rosario; Sanchez-Gonzalez, Dolores

    2009-01-01

    Research in environmental attitudes' assessment has significantly increased in recent years. The development of specific attitude scales for specific environmental problems has often been proposed. This paper describes the Groundwater Pollution Test (GPT), a 19-item survey instrument using a Likert-type scale. The survey has been used with…

  4. Designing, Testing, and Validating an Attitudinal Survey on an Environmental Topic: A Groundwater Pollution Survey Instrument for Secondary School Students

    Science.gov (United States)

    Lacosta-Gabari, Idoya; Fernandez-Manzanal, Rosario; Sanchez-Gonzalez, Dolores

    2009-01-01

    Research in environmental attitudes' assessment has significantly increased in recent years. The development of specific attitude scales for specific environmental problems has often been proposed. This paper describes the Groundwater Pollution Test (GPT), a 19-item survey instrument using a Likert-type scale. The survey has been used with…

  5. Instrumentation Design and Development Facilities

    Data.gov (United States)

    Federal Laboratory Consortium — RTTC has facilities for design, development and fabrication of: custominstrumentation, mobile instrumentation, miniaturized instrumentation, wirelessinstrumentation,...

  6. Thermal Design of the Instrument for the Transiting Exoplanet Survey Satellite

    Science.gov (United States)

    Allen, Gregory D.

    2016-01-01

    TESS observatory is a two year NASA Explorer mission which will use a set of four cameras to discover exoplanets. It will be placed in a high-earth orbit with a period of 13.7 days and will be unaffected by temperature disturbances caused by environmental heating from the Earth. The cameras use their stray-light baffles to passively cool the cameras and in turn the CCD's in order to maintain operational temperatures. The design has been well thought out and analyzed to maximize temperature stability. The analysis shows that the design keeps the cameras and their components within their temperature ranges which will help make it a successful mission. It will also meet its survival requirement of sustaining exposure to a five hour eclipse. Official validation and verification planning is underway and will be performed as the system is built up. It is slated for launch in 2017.

  7. The Fly's Eye Camera System -- an instrument design for large \\'etendue time-domain survey

    CERN Document Server

    Pál, András; Csépány, Gergely; Jaskó, Attila; Schlaffer, Ferenc; Vida, Krisztián; Mező, György; Döbrentei, László; Farkas, Ernő; Kiss, Csaba; Oláh, Katalin; Regály, Zsolt

    2013-01-01

    In this paper we briefly summarize the design concepts of the Fly's Eye Camera System, a proposed high resolution all-sky monitoring device which intends to perform high cadence time domain astronomy in multiple optical passbands while still accomplish a high \\'etendue. Fundings have already been accepted by the Hungarian Academy of Sciences in order to design and build a Fly's Eye device unit. Beyond the technical details and the actual scientific goals, this paper also discusses the possibilities and yields of a network operation involving ~10 sites distributed geographically in a nearly homogeneous manner. Currently, we expect to finalize the mount assembly -- that performs the sidereal tracking during the exposures -- until the end of 2012 and to have a working prototype with a reduced number of individual cameras sometimes in the spring or summer of 2013.

  8. The Fly's Eye Camera System -- an instrument design for large \\'etendue time-domain survey

    CERN Document Server

    Csépány, Gergely; Vida, Krisztián; Regály, Zsolt; Mészáros, László; Oláh, Katalin; Kiss, Csaba; Döbrentei, László; Jaskó, Attila; Mező, György; Farkas, Ernő

    2014-01-01

    In this paper we briefly summarize the design concepts of the Fly's Eye Camera System, a proposed high resolution all-sky monitoring device which intends to perform high cadence time domain astronomy in multiple optical passbands while still accomplish a high \\'etendue. Fundings have already been accepted by the Hungarian Academy of Sciences in order to design and build a Fly's Eye device unit. Beyond the technical details and the actual scientific goals, this paper also discusses the possibilities and yields of a network operation involving $\\sim10$ sites distributed geographically in a nearly homogeneous manner. Currently, we expect to finalize the mount assembly -- that performs the sidereal tracking during the exposures -- until the end of 2012 and to have a working prototype with a reduced number of individual cameras sometimes in the spring or summer of 2013.

  9. Conference Discussion: The Challenges in Multi-Object Spectroscopy Instrument and Survey Design, and in Data Processing and Analysis

    Science.gov (United States)

    Balcells, M.; Skillen, I.

    2016-10-01

    The final session of the conference Multi-Object Spectroscopy in the Next Decade: Big Questions, Large Surveys, and Wide Fields, held in La Palma 2-6 March 2015, was devoted to a discussion of the challenges in designing and operating the next-generation survey spectrographs, and planning and carrying out their massive surveys. The wide-ranging 1.5-hour debate was recorded on video tape, and in this paper we report the edited transcription of the dialog.

  10. Industrial instrumentation principles and design

    CERN Document Server

    Padmanabhan, Tattamangalam R

    2000-01-01

    Pneumatic, hydraulic and allied instrumentation schemes have given way to electronic schemes in recent years thanks to the rapid strides in electronics and allied areas. Principles, design and applications of such state-of-the-art instrumentation schemes form the subject matter of this book. Through representative examples, the basic building blocks of instrumentation schemes are identified and each of these building blocks discussed in terms of its design and interface characteristics. The common generic schemes synthesized with such building blocks are dealt with subsequently. This forms the scope of Part I. The focus in Part II is on application. Displacement and allied instrumentation, force and allied instrumentation and process instrumentation in terms of temperature, flow, pressure level and other common process variables are dealt with separately and exhaustively. Despite the diversity in the sensor principles and characteristics and the variety in the applications and their environments, it is possib...

  11. Development of the physician satisfaction survey instrument.

    Science.gov (United States)

    Soo Hoo, W E; Ramer, L

    1998-01-01

    Continuous quality improvement (CQI) activities depend on valid and reliable instruments to generate data. An evaluation of internal and external customer satisfaction is one of the pillars of the CQI process. This article describes the development of a valid and reliable instrument for measuring physicians' satisfaction with the orthopedic nursing units at a major medical trauma center. The physician satisfaction survey instrument was found to be internally consistent (alpha = .95). Confirmatory factor analysis revealed that 68% of the variance in physician satisfaction scores (eigenvalue = 8.14) was explained by using a single-factor model.

  12. The DESI Experiment Part II: Instrument Design

    CERN Document Server

    Aghamousa, Amir; Ahlen, Steve; Alam, Shadab; Allen, Lori E; Prieto, Carlos Allende; Annis, James; Bailey, Stephen; Balland, Christophe; Ballester, Otger; Baltay, Charles; Beaufore, Lucas; Bebek, Chris; Beers, Timothy C; Bell, Eric F; Bernal, José Luis; Besuner, Robert; Beutler, Florian; Blake, Chris; Bleuler, Hannes; Blomqvist, Michael; Blum, Robert; Bolton, Adam S; Briceno, Cesar; Buckley-Geer, Elizabeth; Burden, Angela; Burtin, Etienne; Busca, Nicolas G; Cahn, Robert N; Cai, Yan-Chuan; Carlberg, Raymond G; Carton, Pierre-Henri; Casas, Ricard; Castander, Francisco J; Claybaugh, Todd M; Close, Madeline; Coker, Carl T; Cole, Shaun; Cooper, Andrew P; Cousinou, M -C; Crocce, Martin; Cuby, Jean-Gabriel; Cunningham, Daniel P; Davis, Tamara; Dawson, Kyle S; de la Macorra, Axel; De Vicente, Juan; Delubac, Timothée; Derwent, Mark; Dey, Arjun; Dhungana, Govinda; Ding, Zhejie; Duan, Yutong T; Ealet, Anne; Edelstein, Jerry; Eftekharzadeh, Sarah; Eisenstein, Daniel J; Elliott, Ann; Escoffier, Stephanie; Evatt, Matthew; Fagrelius, Parker; Fan, Xiaohui; Fanning, Kevin; Farahi, Arya; Favole, Ginevra; Feng, Yu; Fernandez, Enrique; Findlay, Joseph R; Finkbeiner, Douglas P; Fitzpatrick, Michael J; Flaugher, Brenna; Flender, Samuel; Font-Ribera, Andreu; Forero-Romero, Jaime E; Fosalba, Pablo; Frenk, Carlos S; Fumagalli, Michele; Garcia-Bellido, Juan; Gaztanaga, Enrique; Gershkovich, Irina; Gillet, Denis; Gonzalez-de-Rivera, Guillermo; Gonzalez-Perez, Violeta; Gott, Shelby; Graur, Or; Gutierrez, Gaston; Guy, Julien; Habib, Salman; Heetderks, Henry; Heetderks, Ian; Heitmann, Katrin; Hellwing, Wojciech A; Herrera, David A; Ho, Shirley; Honscheid, Klaus; Huff, Eric; Hutchinson, Timothy A; Huterer, Dragan; Hwang, Ho Seong; Laguna, Joseph Maria Illa; Ishikawa, Yuzo; Jacobs, Dianna; Jeffrey, Niall; Jelinsky, Patrick; Jiang, Linhua; Jimenez, Jorge; Johnson, Jennifer; Joyce, Richard; Jullo, Eric; Juneau, Stephanie; Kama, Sami; Karcher, Armin; Karkar, Sonia; Kehoe, Robert; Kennamer, Noble; Kent, Stephen; Kilbinger, Martin; Kim, Alex G; Kirkby, David; Kisner, Theodore; Kitanidis, Ellie; Kneib, Jean-Paul; Koposov, Sergey; Kovacs, Eve; Kremin, Anthony; Kron, Richard; Kronig, Luzius; Kueter-Young, Andrea; Lacey, Cedric G; Lafever, Robin; Lahav, Ofer; Lambert, Andrew; Landriau, Martin; Lang, Dustin; Name, Publication; Lauer, Tod R; Goff, Jean-Marc Le; Guillou, Laurent Le; Van Suu, Auguste Le; Lee, Jae Hyeon; Lee, Su-Jeong; Leitner, Daniela; Levi, Michael E; L'Huillier, Benjamin; Li, Baojiu; Liang, Ming; Lin, Huan; Linder, Eric; Loebman, Sarah R; Lukić, Zarija; MacCrann, Niall; Magneville, Christophe; Makarem, Laleh; Manera, Marc; Manser, Christopher J; Marshall, Robert; Martini, Paul; Massey, Richard; Matheson, Thomas; McCauley, Jeremy; McDonald, Patrick; McGreer, Ian D; Meisner, Aaron; Metcalfe, Nigel; Miller, Timothy N; Miquel, Ramon; Moustakas, John; Myers, Adam; Naik, Milind; Newman, Jeffrey; Nichol, Robert C; Nicola, Andrina; da Costa, Luiz Nicolati; Niz, Gustavo; Norberg, Peder; Nord, Brian; Norman, Dara; Nugent, Peter; O'Brien, Thomas; Oh, Minji; Olsen, Knut A G; Padilla, Cristobal; Padmanabhan, Hamsa; Padmanabhan, Nikhil; Palanque-Delabrouille, Nathalie; Palmese, Antonella; Pappalardo, Daniel; Park, Changbom; Patej, Anna; Peacock, John A; Peiris, Hiranya V; Percival, Will J; Perruchot, Sandrine; Pieri, Matthew M; Pogge, Richard; Poppett, Claire; Probst, Ronald G; Rabinowitz, David; Ree, Chang Hee; Refregier, Alexandre; Regal, Xavier; Reid, Beth; Reil, Kevin; Rezaie, Mehdi; Rockosi, Connie; Roe, Natalie; Ronayette, Samuel; Roodman, Aaron; Ross, Ashley J; Ross, Nicholas P; Rossi, Graziano; Rozo, Eduardo; Ruhlmann-Kleider, Vanina; Rykoff, Eli; Sabiu, Cristiano; Samushia, Lado; Sanchez, Javier; Schlegel, David J; Schneider, Michael; Schubnell, Michael; Secroun, Aurélia; Seljak, Uros; Seo, Hee-Jong; Serrano, Santiago; Shafieloo, Arman; Shan, Huanyuan; Sholl, Michael J; Shourt, William V; Silber, Joseph H; Silva, David R; Sirk, Martin M; Slosar, Anze; Smith, Alex; Smoot, George; Som, Debopam; Song, Yong-Seon; Sprayberry, David; Staten, Ryan; Stefanik, Andy; Tarle, Gregory; Tie, Suk Sien; Tinker, Jeremy L; Tojeiro, Rita; Valdes, Francisco; Valenzuela, Octavio; Valluri, Monica; Vargas-Magana, Mariana; Verde, Licia; Walker, Alistair R; Wang, Yuting; Weaver, Benjamin A; Weaverdyck, Curtis; Wechsler, Risa; Weinberg, David H; White, Martin; Yang, Qian; Yeche, Christophe; Zhao, Gong-Bo; Zheng, Yi; Zhu, Yaling; Zou, Hu; Zu, Ying

    2016-01-01

    DESI (Dark Energy Spectropic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. The DESI instrument is a robotically-actuated, fiber-fed spectrograph capable of taking up to 5,000 simultaneous spectra over a wavelength range from 360 nm to 980 nm. The fibers feed ten three-arm spectrographs with resolution $R= \\lambda/\\Delta\\lambda$ between 2000 and 5500, depending on wavelength. The DESI instrument will be used to conduct a five-year survey designed to cover 14,000 deg$^2$. This powerful instrument will be installed at prime focus on the 4-m Mayall telescope in Kitt Peak, Arizona, along with a new optical corrector, which will provide a three-degree diameter field of view. The DESI collaboration will also deliver a spectroscopic pipeline and data management system to reduce and archive all data for eventual public use.

  13. Mechanical engineers' handbook, design, instrumentation, and controls

    CERN Document Server

    Kutz, Myer

    2015-01-01

    Full coverage of electronics, MEMS, and instrumentation andcontrol in mechanical engineering This second volume of Mechanical Engineers' Handbookcovers electronics, MEMS, and instrumentation and control, givingyou accessible and in-depth access to the topics you'll encounterin the discipline: computer-aided design, product design formanufacturing and assembly, design optimization, total qualitymanagement in mechanical system design, reliability in themechanical design process for sustainability, life-cycle design,design for remanufacturing processes, signal processing, dataacquisition and dis

  14. Design of Onboard Instrument Based on Virtual Instrument Technology

    Institute of Scientific and Technical Information of China (English)

    TANG Baoping; ZHONG Yuanchang; QIU Jianwei

    2006-01-01

    After analyzing and comparing the traditional automobile instrument, the onboard instrument based on virtual instrument technology is designed in this paper. The PC/104 computer was employed as the core processing unit of the onboard instrument, and the several intelligent data acquisition nodes are set and connected by the CAN bus, through which the nodes can communicate with the core processing unit. The information of the vehicle's working condition can be displayed synthetically by adopting virtual instrument technology. When the working condition goes beyond its limit, the system can emit an alarm, record and storage the abnormal condition automatically, and suggest how to deal with the abnormity urgently. The development background and design idea of onboard information system were elaborated in the paper. The software, the hardware architecture and the principle of onboard information system were introduced in detail.

  15. Star Formation & Stellar Evolution: Future Surveys & Instrumentation

    CERN Document Server

    Evans, C J

    2015-01-01

    The next generation of multi-object spectrographs (MOS) will deliver comprehensive surveys of the Galaxy, Magellanic Clouds and nearby dwarfs. These will provide us with the vast samples, spanning the full extent of the Hertzsprung-Russell diagram, that are needed to explore the chemistry, history and dynamics of their host systems. Further ahead, the Extremely Large Telescopes (ELTs) will have sufficient sensitivity and angular resolution to extend stellar spectroscopy well beyond the Local Group, opening-up studies of the chemical evolution of galaxies across a broad range of galaxy types and environments. In this contribution I briefly reflect on current and future studies of stellar populations, and introduce plans for the MOSAIC instrument for the European ELT.

  16. Survey Instrument Validity Part II: Validation of a Survey Instrument Examining Athletic Trainers' Knowledge and Practice Beliefs Regarding Exertional Heat Stroke

    Science.gov (United States)

    Burton, Laura J.; Mazerolle, Stephanie M.

    2011-01-01

    Objective: The purpose of this article is to discuss the process of developing and validating an instrument to investigate an athletic trainer's attitudes and behaviors regarding the recognition and treatment of exertional heat stroke. Background: Following up from our initial paper, which discussed the process of survey instrument design and…

  17. Inertial instrument system for aerial surveying

    Science.gov (United States)

    Brown, R.H.; Chapman, W.H.; Hanna, W.F.; Mongan, C.E.; Hursh, J.W.

    1985-01-01

    An inertial guidance system for aerial surveying has been developed under contract to the U.S. Geological Survey. This prototype system, known as the aerial profiling of terrain (APT) system, is designed to determine continuously the positions of points along an aircraft flight path, or the underlying terrain profile, to an accuracy of + or - 0.5 ft (15 cm) vertically and + or - 2 ft (61 cm) horizontally. The system 's objective thus is to accomplish, from a fixed-wing aircraft, what would traditionally be accomplished from ground-based topographic surveys combined with aerial photography and photogrammetry. The two-part strategy for measuring the terrain profile entails: (1) use of an inertial navigator for continuous determination of the three-coordinate position of the aircraft, and (2) use of an eye-safe pulsed laser profiler for continuous measurement of the vertical distance from aircraft to land surface, so that the desired terrain profile can then be directly computed. The APT system, installed in a DeHavilland Twin Otter aircraft, is typically flown at a speed of 115 mph (105 knots) at an altitude of 2,000 ft (610 m) above the terrain. Performance-evaluation flights have shown that the vertical and horizontal accuracy specifications are met. (USGS)

  18. Analysis and design of instrumented subsurface mooring

    Digital Repository Service at National Institute of Oceanography (India)

    SanilKumar, V.; Sakhardande, R.N.; Nayak, B.U.; Somanatha, G.S.

    The analysis and design of instrumented mooring is complex, since the environmental loading on the system may be static or dynamic and random. By using certain assumptions, an equivalent static loading system can be adopted and the problem can...

  19. Design enhancing instruments: Post Occupancy Evaluation in Hospice Design

    Directory of Open Access Journals (Sweden)

    Tiziana Ferrante

    2013-10-01

    Full Text Available During construction , in this case of a healthcare facility, the “management”phase can determine, depending on the life cycle of the building, how long it can effectively last. Among different assessment methodologies, the Post Occupancy Evaluation methodology can still be considered the most reliable one, as it accounts for the specific needs of those who are directly interested and involved in the evaluation process: i.e. its users. Such instruments pertaining to health and social care allow us to acknowledge the degree ofsatisfaction recorded by a pool of users considered to be “fragile”, proving quite useful for Public Administrations and private enterprises to improve the quality of service in terms of efficiency and effectiveness as well as providing additional design input for new construction and/or redevelopment. This paper discusses a survey conducted on hospices.

  20. The DESI Experiment Part II: Instrument Design

    OpenAIRE

    DESI Collaboration; Aghamousa, Amir; Aguilar, Jessica; Ahlen, Steve; Alam, Shadab; Allen, Lori E.; Prieto, Carlos Allende; Annis, James; Bailey, Stephen; Balland, Christophe; Ballester, Otger; Baltay, Charles; Beaufore, Lucas; Bebek, Chris; Beers, Timothy C.

    2016-01-01

    DESI (Dark Energy Spectropic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. The DESI instrument is a robotically-actuated, fiber-fed spectrograph capable of taking up to 5,000 simultaneous spectra over a wavelength range from 360 nm to 980 nm. The fibers feed ten three-arm spectrographs with resolution $R= \\lambda/\\Delta...

  1. Higher Education and Students with Orthopedic Disabilities: A Survey Instrument.

    Science.gov (United States)

    Singh, Delar K.

    A survey instrument is presented that was used in a national survey of 160 colleges and universities to explore facilities and services to students with orthopedic disabilities. The survey contains 33 items that focus on the following areas: structural accessibility, academic accessibility, dorm-living, and recreational opportunities. The total…

  2. Weak Lensing from Space I: Instrumentation and Survey Strategy

    Energy Technology Data Exchange (ETDEWEB)

    Rhodes, Jason; Refregier, Alexandre; Massey, Richard; Albert, Justin; Bacon, David; Bernstein, Gary; Ellis, Richard; Jain, Bhuvnesh; Kim, Alex; Lampton, Mike; McKay, Tim; Akerlof, C.; Aldering, G.; Amanullah, R.; Astier, P.; Barrelet, E.; Bebek, C.; Bergstrom, L.; Bercovitz, J.; Bester, M.; Bonissent, A.; Bower, C.; Carithers, W.; Commins, E.; Day, C.; Deustua, S.; DiGennaro, R.; Ealet, A.; Eriksson, M.; Fruchter, A.; Genat, J.-F.; Goldhaber, G.; Goobar, A.; Groom, D.; Harris, S.; Harvey, P.; Heetderks, H.; Holland, S.; Huterer, D.; Karcher, A.; Kolbe, W.; Kreiger, B.; Lafever, R.; Lamoureux, J.; Levi, M.; Devin, D.; Linder, E.; Loken, S.; Malina, R.; McKee, S.; Miquel, R.; Mortsell, E.; Mostek, N.; Mufson, S.; Musser, J.; Nugent, P.; Oluseyi, H.; Pain, R.; Palaio, N.; Pankow, D.; Perlmutter, S.; Pratt, R.; Prieto, E.; Robinson, K.; Roe, N.; Sholl, M.; Schubnell, M.; Smadja, G.; Smoot, G.; Spadafora, A.; Tarle, G.; Tomasch, A.; von der Lippe, H.; Vincent, D.; Walder, J.-P.; Wang, G.

    2003-04-23

    A wide field space-based imaging telescope is necessary to fully exploit the technique of observing dark matter via weak gravitational lensing. This first paper in a three part series outlines the survey strategies and relevant instrumental parameters for such a mission. As a concrete example of hardware design, we consider the proposed Supernova/Acceleration Probe (SNAP). Using SNAP engineering models, we quantify the major contributions to this telescope's Point Spread Function (PSF). These PSF contributions are relevant to any similar wide field space telescope. We further show that the PSF of SNAP or a similar telescope will be smaller than current ground-based PSFs, and more isotropic and stable over time than the PSF of the Hubble Space Telescope. We outline survey strategies for two different regimes - a ''wide'' 300 square degree survey and a ''deep'' 15 square degree survey that will accomplish various weak lensing goals including statistical studies and dark matter mapping.

  3. Signal conditioning circuitry design for instrumentation systems.

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Cory A.

    2012-01-01

    This report details the current progress in the design, implementation, and validation of the signal conditioning circuitry used in a measurement instrumentation system. The purpose of this text is to document the current progress of a particular design in signal conditioning circuitry in an instrumentation system. The input of the signal conditioning circuitry comes from a piezoresistive transducer and the output will be fed to a 250 ksps, 12-bit analog-to-digital converter (ADC) with an input range of 0-5 V. It is assumed that the maximum differential voltage amplitude input from the sensor is 20 mV with an unknown, but presumably high, sensor bandwidth. This text focuses on a specific design; however, the theory is presented in such a way that this text can be used as a basis for future designs.

  4. Survey instruments used in clinical and epidemiological research on waterpipe tobacco smoking: a systematic review

    Directory of Open Access Journals (Sweden)

    Gunukula Sameer K

    2010-07-01

    Full Text Available Abstract Background The primary objective was to systematically review the medical literature for instruments validated for use in epidemiological and clinical research on waterpipe smoking. Methods We searched the following databases: MEDLINE, EMBASE, and ISI the Web of Science. We selected studies using a two-stage duplicate and independent screening process. We included papers reporting on the development and/or validation of survey instruments to measure waterpipe tobacco consumption or related concepts. Two reviewers used a standardized and pilot tested data abstraction form to collect data from each eligible study using a duplicate and independent screening process. We also determined the percentage of observational studies assessing the health effects of waterpipe tobacco smoking and the percentage of studies of prevalence of waterpipe tobacco smoking that have used validated survey instruments. Results We identified a total of five survey instruments. One instrument was designed to measure knowledge, attitudes, and waterpipe use among pregnant women and was shown to have internal consistency and content validity. Three instruments were designed to measure waterpipe tobacco consumption, two of which were reported to have face validity. The fifth instrument was designed to measure waterpipe dependence and was rigorously developed and validated. One of the studies of prevalence and none of the studies of health effects of waterpipe smoking used validated instruments. Conclusions A number of instruments for measuring the use of and dependence on waterpipe smoking exist. Future research should study content validity and cross cultural adaptation of these instruments.

  5. Urbis: Instrument ofr local environmental survey

    NARCIS (Netherlands)

    Borst, H.C.

    2000-01-01

    TNO has developed a GIS based instrument, named Urbis, which makes it possible to assess the noise situation in a municipality or region as a whole, with a high level of detail. On the basis of activity or emission data (road-traffic intensities, acoustical reports, etc.), noise loads are calculated

  6. Development of an RDECOM Workforce Motivational Survey Instrument

    Science.gov (United States)

    2016-09-01

    compensation and workplace environment structure to motivate the target generational workforce demographic to improve productivity. The deliverables from this...factors. We developed a closed-loop survey instrument and analysis methodology to identify distinct generational workforce motivational factors. Nine...United States Army Research Development and Engineering Command (RDECOM) supervisory engineers, General Schedule (GS) 14 and 15, reviewed the survey

  7. Survey Instrument Validity Part I: Principles of Survey Instrument Development and Validation in Athletic Training Education Research

    Science.gov (United States)

    Burton, Laura J.; Mazerolle, Stephanie M.

    2011-01-01

    Context: Instrument validation is an important facet of survey research methods and athletic trainers must be aware of the important underlying principles. Objective: To discuss the process of survey development and validation, specifically the process of construct validation. Background: Athletic training researchers frequently employ the use of…

  8. Instrumentation

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Journal Scope:Instrumentation is a high quality open access peer reviewed research journal.Authors are solicited to contribute to these journals by submitting articles that illustrate most up-to-date research results,projects,surveying works and industrial experiences that describe significant advances in the instrumental science.The mission of the Instrumentation is

  9. High resolution SAR applications and instrument design

    Science.gov (United States)

    Dionisio, C.; Torre, A.

    1993-01-01

    The Synthetic Aperture Radar (SAR) has viewed, in the last two years, a huge increment of interest from many preset and potential users. The good spatial resolution associated to the all weather capability lead to considering SAR not only a scientific instrument but a tool for verifying and controlling the daily human relationships with the Earth Environment. New missions were identified for SAR as spatial resolution became lower than three meters: disasters, pollution, ships traffic, volcanic eruptions, earthquake effect are only a few of the possible objects which can be effectively detected, controlled and monitored by SAR mounted on satellites. High resolution radar design constraints and dimensioning are discussed.

  10. Designer's handbook of instrumentation and control circuits

    CERN Document Server

    Carr, Joseph J

    1991-01-01

    Here is a comprehensive, practical guide to the entire process of analog instrumentation and control, from sensor input to data conversion circuitry and final output. This readable handbook avoids complex mathematical treatments, instead taking an applications-oriented approach and presenting many sample circuits and concrete examples. It is an essential reference for engineers and high-level technicians in a variety of scientific and engineering fields--anywhere data is collected electronically and where such data is used to control physical processes.Key Features* Covers design o

  11. [French residents' training in instrumental deliveries: A national survey].

    Science.gov (United States)

    Saunier, C; Raimond, E; Dupont, A; Pelissier, A; Bonneau, S; Gabriel, R; Graesslin, O

    2016-11-01

    To evaluate French residents in Obstetrics and Gynaecology's training in instrumental deliveries in 2015. We conducted a national descriptive survey among 758 residents between December 2014 and January 2015. Respondents were invited by email to specify their University Hospital, their current university term, the number of instrumental deliveries performed by vacuum extractor, forceps or spatulas, and whether they made systematic ultrasound exams before performing the extraction. Response rate was 34.7 % (n=263). There were important differences between regions in terms of type of instruments used. Vacuum extractor was the most commonly used instrument for instrumental deliveries by French residents (56.9 %), more than forceps (25.2 %) and spatulas (17.9 %). At the end of the residency, all the residents had been trained in instrumental deliveries with at least two instruments. The training of difficult techniques as well as their perfect control is required for instrumental deliveries. Yet, we are forced to note that there are substantial differences in the French residents' training in instrumental deliveries depending on their region. So, teaching at least two techniques seems essential as well as improving the training capacities and standardizing practices. A greater systematization of the teaching of the mechanics and obstetric techniques might be a solution to be considered too. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  12. Applications of Calendar Instruments in Social Surveys: a review

    NARCIS (Netherlands)

    Glasner, T.J.; Vaart, van der W.

    2009-01-01

    Retrospective reports in survey interviews and questionnaires are subject to many types of recall error, which affect completeness, consistency, and dating accuracy. Concerns about this problem have led to the development of so-called calendar instruments, or timeline techniques. These aided recall

  13. The Undergraduate Instrumental Analysis Course: A Survey of Available Equipment.

    Science.gov (United States)

    Leggett, D. J.

    1981-01-01

    Reports results of a survey in which 110 universities were selected to respond to questions regarding approximate age and cost of the instruments used in three major areas: separations, spectroscopy, and electroanalysis. Respondents (N=41) also indicated which pieces of equipment were used in undergraduate courses or were used for research. (CS)

  14. Technical evaluation of available state of Nevada survey instruments

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-02-01

    Argonne National Laboratory (ANL) is reviewing the survey research studies completed by Mountain West Research (1987-1989) for the state of Nevada`s Nuclear Waste Project Office. In this research, 14 survey instruments were used to seek data on whether perceptions of risk could be associated with the possible siting of a high-level radioactive waste repository in Nevada and could be a dominant source of potential, significant, adverse economic impacts. This report presents results from phase 1 of the review, in which ANL contracted with the National Opinion Research Center (NORC) at the University of Chicago to evaluate the technical merits of the nine survey instruments that ANL had been able to acquire. The scope of NORC`s work was limited to rating the questions and stating their strengths and weaknesses. NORC concluded that the surveys could provide valuable data about risk perceptions and potential behavioral responses. NORC identified a few minor problems with a number of questions and the calculated response rates but claimed these problems would probably not have any major biasing effect. The NORC evaluation would have been more complete if the terms used in the questionnaires had been defined, all survey instruments had been acquired, and all data had been made available to the public.

  15. Antisocial sport behaviors survey: instrument development and initial validation.

    Science.gov (United States)

    Kaye, Miranda P; Hoar, Sharleen

    2015-04-01

    The development of a self-report instrument to measure antisocial sport behavior, labeled the Antisocial Sport Behavior Survey (ASBS), among large and diverse samples of athletes is reported. Grounded in the social cognitive theory of moral thought and action (Bandura, 1991) and interpersonal theory (Horowitz, 2004), this instrument was developed and tested in accordance with the traditions of construct validity and classical test theory (Gehlback & Brinkworth, 2011). In Phase 1, 272 college-aged competitive sport participants confirmed a theoretical structure of antisocial sport behavior including eight factors (hypercompetitive, intimidating, antagonistic, disrespectful, exploitable, overly accommodating, abetting, and melodramatic). Phase 2 reports on item development and the response structure of the instrument. In Phase 3, evidence of structural validity and external validity for the ASBS was established with 340 college-aged competitive sport participants. The ASBS presents as a promising new instrument to advance understanding of antisocial sport behavior acts committed by competitive athletes.

  16. Instrumentation

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    Journal Scope:Instrumentation is a high quality open access peer reviewed research journal.Authors are solicited to contribute to these journals by submitting articles that illustrate most up-to-date research results,projects,surveying works and industrial experiences that describe significant advances in the instrumental science.The mission of the Instrumentation is to provide a platform for the researchers,academicians,

  17. Water NSTF Design, Instrumentation, and Test Planning

    Energy Technology Data Exchange (ETDEWEB)

    Lisowski, Darius D.; Gerardi, Craig D.; Hu, Rui; Kilsdonk, Dennis J.; Bremer, Nathan C.; Lomperski, Stephen W.; Kraus, Adam R.; Bucknor, Matthew D.; Lv, Qiuping; Farmer, Mitchell T.

    2017-08-01

    variations and off-normal configurations. The facility design follows, including as-built dimensions and specifications of the various mechanical and liquid systems, design choices for the test section, water storage tank, and network piping. Specifications of the instrumentation suite are then presented, along with specific information on performance windows, measurement uncertainties, and installation locations. Finally, descriptions of the control systems and heat removal networks are provided, which have been engineered to support precise quantification of energy balances and facilitate well-controlled test operations.

  18. Shape optimization techniques for musical instrument design

    Science.gov (United States)

    Henrique, Luis; Antunes, Jose; Carvalho, Joao S.

    2002-11-01

    The design of musical instruments is still mostly based on empirical knowledge and costly experimentation. One interesting improvement is the shape optimization of resonating components, given a number of constraints (allowed parameter ranges, shape smoothness, etc.), so that vibrations occur at specified modal frequencies. Each admissible geometrical configuration generates an error between computed eigenfrequencies and the target set. Typically, error surfaces present many local minima, corresponding to suboptimal designs. This difficulty can be overcome using global optimization techniques, such as simulated annealing. However these methods are greedy, concerning the number of function evaluations required. Thus, the computational effort can be unacceptable if complex problems, such as bell optimization, are tackled. Those issues are addressed in this paper, and a method for improving optimization procedures is proposed. Instead of using the local geometric parameters as searched variables, the system geometry is modeled in terms of truncated series of orthogonal space-funcitons, and optimization is performed on their amplitude coefficients. Fourier series and orthogonal polynomials are typical such functions. This technique reduces considerably the number of searched variables, and has a potential for significant computational savings in complex problems. It is illustrated by optimizing the shapes of both current and uncommon marimba bars.

  19. Questionnaire Designing for a Survey

    Directory of Open Access Journals (Sweden)

    S Roopa

    2012-01-01

    Full Text Available Questionnaires are frequently used in quantitative marketing research and social research. A questionnaire is a series of questions asked to individuals to obtain statistically useful information about a given topic. When properly constructed and responsibly administered, questionnaires become a vital instrument by which statements can be made about specific groups or people or entire populations. They are a valuable method of collecting a wide range of information from a large number of individuals, often referred to as respondents. Adequate questionnaire construction is critical to the success of a survey. Appropriate questions, correct ordering of questions, correct scaling, or good questionnaire format can make the survey worthwhile, as it may accurately reflect the views and opinions of the participants. A useful method for checking a questionnaire and making sure it is accurately capturing the intended information is to pretest among a smaller subset of target respondents.

  20. Two valuation questions in one survey: Is it a recipe for sequencing and instrument context effects?

    Science.gov (United States)

    Giraud, K.L.; Loomis, J.B.; Johnson, R.L.

    1999-01-01

    Economic theory suggests that willingness to pay for two goods independently offered should remain unchanged when the survey instrument changes slightly. Four survey treatments consisting of comprehensive good and a subset of that good were used. The surveys alternated in the question ordering and in the embedded good which accompanied the comprehensive good. We tested for sequencing and instrument context effects using both a combined and split sample designs. In the combined sample case we found some evidence to sequencing effects in the data containing the first subset good. Likelihood ratio tests indicated that sequencing did not effect scale or location of parameters. In the test for instrument context effects, evidence was found indicating context does effect willingness to pay estimates.

  1. Instrument and Survey Analysis Technical Report: Program Implementation Survey. Technical Report #1112

    Science.gov (United States)

    Alonzo, Julie; Tindal, Gerald

    2011-01-01

    This technical document provides guidance to educators on the creation and interpretation of survey instruments, particularly as they relate to an analysis of program implementation. Illustrative examples are drawn from a survey of educators related to the use of the easyCBM learning system. This document includes specific sections on…

  2. Design of economic incentive instruments in nutrition policy

    DEFF Research Database (Denmark)

    Jensen, Jørgen Dejgård

    2011-01-01

    • Economic incentives are instruments to improve diets and reduce the fraction of people exposed to diet-related health risks • Proper targeting and design of economic incentive instruments is important, if such instruments should be efficient and feasible policy measures in the improvement of di...... of dietary behaviour in industrialised countries • From a cost-effectiveness perspective, there are considerable potential for optimizing the targeting and design of economic incentive instruments in nutritional policy...

  3. Human factors survey of advanced instrumentation and controls

    Energy Technology Data Exchange (ETDEWEB)

    Carter, R.J.

    1989-01-01

    A survey oriented towards identifying the human factors issues in regard to the use of advanced instrumentation and controls (I C) in the nuclear industry was conducted. A number of United States (US) and Canadian nuclear vendors and utilities were participants in the survey. Human factors items, subsumed under the categories of computer-generated displays (CGD), controls, organizational support, training, and related topics, were discussed. The survey found the industry to be concerned about the human factors issues related to the implementation of advanced I C. Fifteen potential human factors problems were identified. They include: the need for an advanced I C guideline equivalent to NUREG-0700; a role change in the control room from operator to supervisor; information overload; adequacy of existing training technology for advanced I C; and operator acceptance and trust. 11 refs., 1 tab.

  4. Design of economic incentive instruments in nutrition policy

    DEFF Research Database (Denmark)

    Jensen, Jørgen Dejgård

    2011-01-01

    • Economic incentives are instruments to improve diets and reduce the fraction of people exposed to diet-related health risks • Proper targeting and design of economic incentive instruments is important, if such instruments should be efficient and feasible policy measures in the improvement of di...

  5. The Basic Design Report of the 40M SANS Instrument

    Energy Technology Data Exchange (ETDEWEB)

    Han, Young Soo; Lee, Chang Hee; Hwang, Dong Gil; Kim, Hak Rho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Tae Hwan; Choi, Sung Min [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2006-04-15

    The HANARO cold neutron research facility project was launched on July 1, 2003. A state of the art SANS instrument was selected as a top-priority instrument by an instrument selection committee, which consisted of domestic users and HANARO personnel. An instrument development team and an international and domestic instrument advisory team were formulated. The guide and the instrument simulation were performed using Vitess software and the optimum basic design was completed based on the simulation results and the international advisory team reviews. The optimum design of the guide for the 40M SANS instrument was completed and the optimum basic design of the 40M the SANS instrument was also completed based on the Vitess simulation results. The Q range of the instrument will cover from 0.0008 to 1.0 A-1 and the maximum flux at a sample position can reach about 5.5x10 7 n/cm2sec. The simulation results and the basic design product will be used for the detailed design and the construction of the SANS instrument. The simulation results could be applied to the development of the other instrument.

  6. RESOLVE and ECO: Survey Design

    Science.gov (United States)

    Kannappan, Sheila; Moffett, Amanda J.; Norris, Mark A.; Eckert, Kathleen D.; Stark, David; Berlind, Andreas A.; Snyder, Elaine M.; Norman, Dara J.; Hoversten, Erik A.; RESOLVE Team

    2016-01-01

    The REsolved Spectroscopy Of a Local VolumE (RESOLVE) survey is a volume-limited census of stellar, gas, and dynamical mass as well as star formation and galaxy interactions within >50,000 cubic Mpc of the nearby cosmic web, reaching down to dwarf galaxies of baryonic mass ~10^9 Msun and spanning multiple large-scale filaments, walls, and voids. RESOLVE is surrounded by the ~10x larger Environmental COntext (ECO) catalog, with matched custom photometry and environment metrics enabling analysis of cosmic variance with greater statistical power. For the ~1500 galaxies in its two equatorial footprints, RESOLVE goes beyond ECO in providing (i) deep 21cm data with adaptive sensitivity ensuring HI mass detections or upper limits designed to complement other radio and optical surveys in providing diverse, contiguous, and uniform local/global environment data as well as unusually high completeness extending into the gas-dominated dwarf galaxy regime. RESOLVE also offers superb reprocessed photometry including full, deep NUV coverage and synergy with other equatorial surveys as well as unique northern and southern facilities such as Arecibo, the GBT, and ALMA. The RESOLVE and ECO surveys have been supported by funding from NSF grants AST-0955368 and OCI-1156614.

  7. The New Mexico Tech Extrasolar Spectroscopic Survey Instrument (NESSI)

    Science.gov (United States)

    Creech-Eakman, Michelle J.; Jurgenson, C.; Vasisht, G.; Swain, M.; Boston, P.; Santoro, F.

    2010-01-01

    We present the design and scientific objectives behind NESSI, a near-infrared spectroscopic purpose-built for studying exoplanet atmospheres. This instrument is being designed and assembled by a team of scientists and engineers at New Mexico Tech (NMT), the Magdalena Ridge Observatory (MRO) and NASA's Jet Propulsion Lab (JPL), and is scheduled for deployment in late 2010 at the MRO 2.4m telescope. NESSI's unique design is driven by recent space and ground-based NIR spectroscopy of exoplanet atmospheres by members of our team. Optimization of the instrument to achieve 0.01% relative accuracies in spectra of exoplanetary molecular constituents requires careful attention to certain design features and a new technical approach. We present an overview of NESSI's design, including the four major subassemblies: 1) a field derotator, 2) a reimaging module, 3) an optical guiding module, and 4) a multi-object spectrograph subassembly. We also present an overview of our science program specifically designed to build the community of exoplanet researchers and students in NM. The financial support of our team and NESSI itself have been made possible by a NM NASA EPSCoR grant, matching funds from the NMT administration, and internal support for the NESSI hardware from Dr. Van Romero, NMT's Research Vice-President.

  8. Lateral Violence in Nursing Survey: Instrument Development and Validation

    Directory of Open Access Journals (Sweden)

    Lynne S. Nemeth

    2017-07-01

    Full Text Available An examination of the psychometric properties of the Lateral Violence in Nursing Survey (LVNS, an instrument previously developed to measure the perceived incidence and severity of lateral violence (LV in the nursing workplace, was carried out. Conceptual clustering and principal components analysis were used with survey responses from 663 registered nurses and ancillary nursing staff in a southeastern tertiary care medical center. Where appropriate, Cronbach’s alpha (α evaluated internal consistency. The prevalence/severity of lateral violence items constitute two distinct subscales (LV by self and others with Cronbach’s alpha of 0.74 and 0.86, respectively. The items asking about potential causes of LV are unidimensional and internally consistent (alpha = 0.77 but there is no conceptually coherent theme underlying the various causes. Respondents rating a potential LV cause as “major” scored higher on both prevalence/severity subscales than those rating it a “minor” cause or not a cause. Subsets of items on the LVNS are internally reliable, supporting construct validity. Revisions of the original LVNS instrument will improve its use in future work.

  9. Instrumentation

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Journal Scope:Instrumentation is a high quality open access peer reviewed research journal,Authors are solicited to contribute to these journals by submitting articles that illustrate most up-to-date research results,projects,surveying works and industrial

  10. Die Casting Mold Design for Aluminum Alloy Shell of Instrument

    Directory of Open Access Journals (Sweden)

    Li Yuanyuan

    2015-01-01

    Full Text Available This paper is about die casting mold design for aluminum alloy shell of instrument. Three-dimensional model of the casting and mold are designed by using Pro/Engineer and AutoCad which can analyze forming quality. Digital design and theoretical calculation can greatly shorten product development cycle and mold design cycle, improve the accuracy of product design and mold design, and reduce the cost of mold design.

  11. Teaching Analytical Instrument Design with LabVIEW

    Science.gov (United States)

    Gostowski, Rudy

    1996-12-01

    Chemists may be required to setup, troubleshoot, repair and sometimes construct the instruments they use for analytical measurements. Many students are intimidated when first "looking under the hood" of a modern instrument. This curriculum was devised to provide hands-on experience with the theory and design of modern instruments. A background in electronics is considered fundamental to this goal. This course extensively utilizes LabVIEW to economically provide basic electronic instrumentation and to serve in data acquisition and manipulation for a student design project. LabVIEW provides many built-in functions including a graphical user interface (GUI) and has universal acceptance in research and manufacturing settings. Programming is accomplished by placing and connecting icons that represent various functions. Virtual instruments produced by combining data acquisition boards with the language are functional equivalent to their real counterparts. The course culminates in construction of a computer-controlled electrochemical instrument capable of cyclic voltammetry and anodic stripping experiments.

  12. Star Formation and Stellar Evolution: Future Surveys and Instrumentation

    Science.gov (United States)

    Evans, C. J.

    2016-10-01

    The next generation of multi-object spectrographs (MOS) will deliver comprehensive surveys of the Galaxy, Magellanic Clouds and nearby dwarfs. These will provide us with the vast samples, spanning the full extent of the Hertzsprung-Russell diagram, that are needed to explore the chemistry, history and dynamics of their host systems. Further ahead, the Extremely Large Telescopes (ELTs) will have sufficient sensitivity and angular resolution to extend stellar spectroscopy well beyond the Local Group, opening-up studies of the chemical evolution of galaxies across a broad range of galaxy types and environments. In this contribution I briefly reflect on current and future studies of stellar populations, and introduce plans for the MOSAIC instrument for the European ELT.

  13. New hydrologic instrumentation in the U.S. Geological Survey

    Science.gov (United States)

    Latkovich, V.J.; Shope, W.G.; ,

    1991-01-01

    New water-level sensing and recording instrumentation is being used by the U.S. Geological Survey for monitoring water levels, stream velocities, and water-quality characteristics. Several of these instruments are briefly described. The Basic Data Recorder (BDR) is an electronic data logger, that interfaces to sensor systems through a serial-digital interface standard (SDI-12), which was proposed by the data-logger industry; the Incremental Shaft Encoder is an intelligent water-level sensor, which interfaces to the BDR through the SDI-12; the Pressure Sensor is an intelligent, nonsubmersible pressure sensor, which interfaces to the BDR through the SDI-12 and monitors water levels from 0 to 50 feet; the Ultrasonic Velocity Meter is an intelligent, water-velocity sensor, which interfaces to the BDR through the SDI-12 and measures the velocity across a stream up to 500 feet in width; the Collapsible Hand Sampler can be collapsed for insertion through holes in the ice and opened under the ice to collect a water sample; the Lighweight Ice Auger, weighing only 32 pounds, can auger 6- and 8-inch holes through approximately 3.5 feet of ice; and the Ice Chisel has a specially hardened steel blade and 6-foot long, hickory D-handle.

  14. Predictions for surveys with the SPICA Mid-infrared Instrument

    CERN Document Server

    Bonato, M; Cai, Z -Y; De Zotti, G; Bressan, A; Wada, T; Kohno, K; Maiolino, R; Gruppioni, C; Pozzi, F; Lapi, A

    2015-01-01

    We present predictions for number counts and redshift distributions of galaxies detectable in continuum and in emission lines with the Mid-infrared (MIR) Instrument (SMI) proposed for the Space Infrared Telescope for Cosmology and Astrophysics (SPICA). We have considered 24 MIR fine-structure lines, four Polycyclic Aromatic Hydrocarbon (PAH) bands (at 6.2, 7.7, 8.6 and 11.3$\\mu$m) and two silicate bands (in emission and in absorption) at 9.7$\\mu$m and 18.0$\\mu$m. Six of these lines are primarily associated with Active Galactic Nuclei (AGNs), the others with star formation. A survey with the SMI spectrometers of 1 hour integration per field-of-view (FoV) over an area of $1\\,\\hbox{deg}^2$ will yield $5\\,\\sigma$ detections of $\\simeq 140$ AGN lines and of $\\simeq 5.2\\times10^{4}$ star-forming galaxies, $\\simeq 1.6\\times10^{4}$ of which will be detected in at least two lines. The combination of a shallow ($20.0\\,\\hbox{deg}^{2}$, $1.4\\times10^{-1}$ h integration per FoV) and a deep survey ($6.9\\times10^{-3}\\,\\hbox...

  15. Factors affecting the design of instrument flight procedures

    Directory of Open Access Journals (Sweden)

    Ivan FERENCZ

    2008-01-01

    Full Text Available The article highlights factors, which might affect the design of instrument flight procedures. Ishikawa diagram is used to distribute individual factors into classes, as are People, Methods, Regulations, Tools, Data and Environment.

  16. Factors affecting the design of instrument flight procedures

    OpenAIRE

    Ivan FERENCZ; František JÚN; Dušan KEVICKÝ

    2008-01-01

    The article highlights factors, which might affect the design of instrument flight procedures. Ishikawa diagram is used to distribute individual factors into classes, as are People, Methods, Regulations, Tools, Data and Environment.

  17. Final system instrumentation design package for Decade 80 solar house

    Science.gov (United States)

    1978-01-01

    The final configuration of the Decade 80 solar house to monitor and collect system performance data is presented. A review demonstrated by actual operation that the system and the data acquisition subsystem operated satisfactorily and installation of instrumentation was in accordance with the design. This design package is made up of (1) site and system description, (2) operating and control modes, and (3) instrumentation program (including sensor schematic).

  18. The Multi-sensor Airborne Radiation Survey (MARS) Instrument

    Energy Technology Data Exchange (ETDEWEB)

    Fast, James E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Aalseth, Craig E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Asner, David M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bonebrake, Christopher A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Day, Anthony R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dorow, Kevin E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fuller, Erin S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Glasgow, Brian D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hossbach, Todd W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hyronimus, Brian J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jensen, Jeffrey L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnson, Kenneth I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jordan, David V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Morgen, Gerald P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Morris, Scott J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Mullen, O Dennis [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Myers, Allan W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pitts, W. Karl [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rohrer, John S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Runkle, Robert C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Seifert, Allen [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Shergur, Jason M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stave, Sean C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tatishvili, Gocha [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Thompson, Robert C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Todd, Lindsay C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Warren, Glen A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Willett, Jesse A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wood, Lynn S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-01-11

    The Multi-sensor Airborne Radiation Survey (MARS) project has developed a new single cryostat detector array design for high purity germanium (HPGe) gama ray spectrometers that achieves the high detection efficiency required for stand-off detection and actionable characterization of radiological threats. This approach, we found, is necessary since a high efficiency HPGe detector can only be built as an array due to limitations in growing large germanium crystals. Moreover, the system is ruggedized and shock mounted for use in a variety of field applications, including airborne and maritime operations.

  19. Designing and conducting survey research a comprehensive guide

    CERN Document Server

    Rea, Louis M

    2014-01-01

    The industry standard guide, updated with new ideas and SPSS analysis techniques Designing and Conducting Survey Research: A Comprehensive Guide Fourth Edition is the industry standard resource that covers all major components of the survey process, updated to include new data analysis techniques and SPSS procedures with sample data sets online. The book offers practical, actionable guidance on constructing the instrument, administrating the process, and analyzing and reporting the results, providing extensive examples and worksheets that demonstrate the appropriate use of survey and data tech

  20. Design enhancing instruments: Post Occupancy Evaluation in Hospice Design

    OpenAIRE

    Tiziana Ferrante

    2013-01-01

    During construction , in this case of a healthcare facility, the “management”phase can determine, depending on the life cycle of the building, how long it can effectively last. Among different assessment methodologies, the Post Occupancy Evaluation methodology can still be considered the most reliable one, as it accounts for the specific needs of those who are directly interested and involved in the evaluation process: i.e. its users. Such instruments pertaining to health and social care allo...

  1. Mechanical design of ELMER instrument for GTC telescope

    Science.gov (United States)

    Ronquillo, Bernardo; Vega, Miguel A.; Garcia, Rafael; Garcillan, Rocio; Cavaller-Marques, Luis

    2003-03-01

    ELMER is an optical instrument for the GTC designed to observe between 370 and 1000 nm. The observing modes for the instrument at Day One shall be: imaging, long slit spectroscopy, slit-less multi-object spectroscopy, fast photometry, fast short-slit spectroscopy and mask multi-object spectroscopy. It will be installed at the Nasmyth-B focal station at Day One, but it has also been designed to operate at the Folded Cassegrain focal station. The physical configuration of the instrument consists of a front section where the focal plane components are mounted (cover masks and slits) and a rear section with the rest of the components (field lens, folder mirrors, collimator, shutter, filters, prisms, grisms, camera and cryostat). Both sections are connected through a hexapod type structure. An accurate behavior model of the instrument has been developed to optimize the design of the structural parts. The geometry of the hexapod configuration has been adjusted to reduce the ratio between the lateral deflection of the rear section and its rotation in order to minimize the image motion due to the deflections of the instrument. Special effort has been devoted to the design of the drives of the four wheels, each one driven by a preloaded worm gear.

  2. Parents' childhood fever management: community survey and instrument development.

    Science.gov (United States)

    Walsh, Anne; Edwards, Helen; Fraser, Jenny

    2008-08-01

    This paper is a report of a study to explore Australian parents' knowledge, beliefs, practices and information sources about fever management and develop a scale to measure parents' fever management practices. Parental fever phobia and overuse of antipyretics to reduce fever continue. No scales to measure parents' fever management practices are available. A community-based, postal survey was carried out in 2005 with 401 Australian parents of well children aged 6 months-5 years. Respondents were recruited through advertising (48.4%), face-to-face (26.4%) and snowball (24.4%) methods. A 33-item instrument was developed; construct and content validity were determined by an expert panel and item reliability by test-retest. Moderate fever (40.0 +/- 1.0 degrees C) was reported to be harmful (88%), causing febrile convulsions (77.7%). Usual practices targeted temperature reduction, antipyretic administration (87.8%), temperature monitoring (52.5%). Fewer evidence-based practices, such as encouraging fluids (49.0%) and light clothing (43.8%), were reported. Positive changes over time (36.4%) included less concern and delayed or reduced antipyretic use. Negative practice changes (22.7%) included greater concern and increased antipyretic use. Medical advice was sought for illness symptoms (48.7%) and high (37.4%) or persistent (41.5%) fevers. Fever management was learnt from doctors, family and friends and working experience, while receiving conflicting information (41.9%) increased concerns and created uncertainty about best practice. Parents need consistent evidence-based information about childhood fever management. The Parental Fever Management Scale requires further testing with different populations and in different cultures and healthcare systems to evaluate its usefulness in nursing practice and research.

  3. Surveying Instruments: Their History and Classroom Use. National Council of Teachers of Mathematics, Yearbook 19 [1947].

    Science.gov (United States)

    Kiely, Edmond R.

    The first four chapters trace the history of surveying instruments from beginnings in Egypt, China, and Babylonia to Greece and Rome, then Europe, Islam, and India and finally in the Renaissance in Europe. The organization of these chapters is generally by the major areas of leveling instruments, right-angle instruments, staff combinations, and…

  4. 3D Printed Surgical Instruments: The Design and Fabrication Process.

    Science.gov (United States)

    George, Mitchell; Aroom, Kevin R; Hawes, Harvey G; Gill, Brijesh S; Love, Joseph

    2017-01-01

    3D printing is an additive manufacturing process allowing the creation of solid objects directly from a digital file. We believe recent advances in additive manufacturing may be applicable to surgical instrument design. This study investigates the feasibility, design and fabrication process of usable 3D printed surgical instruments. The computer-aided design package SolidWorks (Dassault Systemes SolidWorks Corp., Waltham MA) was used to design a surgical set including hemostats, needle driver, scalpel handle, retractors and forceps. These designs were then printed on a selective laser sintering (SLS) Sinterstation HiQ (3D Systems, Rock Hill SC) using DuraForm EX plastic. The final printed products were evaluated by practicing general surgeons for ergonomic functionality and performance, this included simulated surgery and inguinal hernia repairs on human cadavers. Improvements were identified and addressed by adjusting design and build metrics. Repeated manufacturing processes and redesigns led to the creation of multiple functional and fully reproducible surgical sets utilizing the user feedback of surgeons. Iterative cycles including design, production and testing took an average of 3 days. Each surgical set was built using the SLS Sinterstation HiQ with an average build time of 6 h per set. Functional 3D printed surgical instruments are feasible. Advantages compared to traditional manufacturing methods include no increase in cost for increased complexity, accelerated design to production times and surgeon specific modifications.

  5. Survey of instrumentation for environmental monitoring: major update. Volume 3. Radiation

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    This is the third volume of a four-volume (seven-part) series, the culmination of a comprehensive survey of instrumentation for environmental monitoring. Consideration is given to instruments and techniques presently in use and to those developed for other purposes but having possible applications to radiation monitoring. The results of the survey are given as descriptions of the physical and operating characteristics of available instruments, critical comparisons among instrumentation methods, and recommendations of promising methodology and development of new instrumentation. Information is also given regarding the pollutants to be monitored, their characteristics and forms, their sources and pathways, their effects on the ecosystem, and the means of controlling them through process and regulatory controls. The discussion is presented under sections entitled radiation sources; instrumentation: by type of radiation or instrument type; and, instrumentation for specific radionuclides. (JGB)

  6. COBE Differential Microwave Radiometers - Instrument design and implementation

    Science.gov (United States)

    Smoot, G.; Bennett, Charles; Weber, R.; Maruschak, John; Ratliff, Roger; Janssen, M.

    1990-01-01

    Differential Microwave Radiometers (DMRs) at frequencies of 31.5, 53, and 90 GHz have been designed and built to map the large angular scale variations in the brightness temperature of the cosmic microwave background radiation. The instrument is being flown aboard NASA's Cosmic Background Explorer (COBE) satellite, launched on November 18, 1989. Each receiver input is switched between two antennas pointing 60 deg apart on the sky. The satellite is in near-polar orbit with the orbital plane precessing at 1 deg per day, causing the beams to scan the entire sky in 6 months. In 1 year of observation, the instruments are capable of mapping the sky to an rms sensitivity of 0.1 mK per 7 deg field of view. The mission and the instrument have been carefully designed to minimize the need for systematic corrections to the data.

  7. The Dark Energy Spectroscopic Instrument (DESI): Science from the DESI Survey

    Science.gov (United States)

    Eisenstein, Daniel; DESI Collaboration

    2015-01-01

    The Dark Energy Spectroscopic Instrument (DESI) will enable an ambitious redshift survey to probe dark energy by the baryon acoustic oscillation and redshift-space distortion methods. The same data set will serve numerous other goals in cosmology and astrophysics. Using a new 5000-fiber instrument and 8 square degree field of view at the Mayall telescope, the DESI survey plans to cover 14,000 square degrees and about 25 million high-redshift objects. The targets include 4M luminous red galaxies (redshift 0.4-1.0), 18M emission line galaxies (redshift 0.6-1.6), and 2.4M quasars, including 0.7M Lyman-alpha forest sight lines. With this, DESI can map the expansion history of the Universe to redshift 3, achieving unprecedented performance from the baryon acoustic oscillation method. We will describe the present state of the survey design and the cosmological forecasts for dark energy, inflation, and neutrino physics. We also give an update on the DESI Science Collaboration.

  8. Advanced Camera for Surveys Instrument Handbook for Cycle 25 v. 16.0

    Science.gov (United States)

    Avila, R. J.

    2017-01-01

    The Advanced Camera for Surveys (ACS), a third-generation instrument, was installed in the Hubble Space Telescope during Servicing Mission 3B, on March 7, 2002. Its primary purpose was to increase HST imaging discovery efficiency by about a factor of 10, with a combination of detector area and quantum efficiency that surpasses previous instruments. ACS has three independent cameras that have provided wide-field, high resolution, and ultraviolet imaging capabilities respectively, using a broad assortment of filters designed to address a large range of scientific goals. In addition, coronagraphic, polarimetric, and grism capabilities have made the ACS a versatile and powerful instrument. The ACS Instrument Handbook, which is maintained by the ACS Team at STScI, descr ibes the instrument properties, performance, operations, and calibration. It is the basic technical reference manual for the instrument, and should be used with other documents (listed in Table 1.1) for writing Phase I proposals, detailed Phase II programs, and for data analysis. (See Figure 1.1). In May 2009, Servicing Mission 4 (SM4) successfully restored the ACS Wide Field Camera (WFC) to regular service after its failure in January 2007. Unfortunately, the ACS High Resolution Camera (HRC) was not restored to operation during SM4, so it cannot be proposed for new observations. Nevertheless, this handbook retains description of the HRC to support analysis of archived observations. The ACS Solar Blind Channel (SBC) was unaffected by the January 2007 failure of WFC and HRC. The SBC has remained in steady operation, and was not serviced during SM4. It remains available for new observations.

  9. Design of virtual three-dimensional instruments for sound control

    Science.gov (United States)

    Mulder, Axel Gezienus Elith

    An environment for designing virtual instruments with 3D geometry has been prototyped and applied to real-time sound control and design. It enables a sound artist, musical performer or composer to design an instrument according to preferred or required gestural and musical constraints instead of constraints based only on physical laws as they apply to an instrument with a particular geometry. Sounds can be created, edited or performed in real-time by changing parameters like position, orientation and shape of a virtual 3D input device. The virtual instrument can only be perceived through a visualization and acoustic representation, or sonification, of the control surface. No haptic representation is available. This environment was implemented using CyberGloves, Polhemus sensors, an SGI Onyx and by extending a real- time, visual programming language called Max/FTS, which was originally designed for sound synthesis. The extension involves software objects that interface the sensors and software objects that compute human movement and virtual object features. Two pilot studies have been performed, involving virtual input devices with the behaviours of a rubber balloon and a rubber sheet for the control of sound spatialization and timbre parameters. Both manipulation and sonification methods affect the naturalness of the interaction. Informal evaluation showed that a sonification inspired by the physical world appears natural and effective. More research is required for a natural sonification of virtual input device features such as shape, taking into account possible co- articulation of these features. While both hands can be used for manipulation, left-hand-only interaction with a virtual instrument may be a useful replacement for and extension of the standard keyboard modulation wheel. More research is needed to identify and apply manipulation pragmatics and movement features, and to investigate how they are co-articulated, in the mapping of virtual object

  10. Design of teleoperated surgical instruments for minimally invasive surgery

    Science.gov (United States)

    Madhani, Akhil Jiten

    1998-12-01

    Minimally invasive surgery (MIS) is performed today using hand held instruments passed through small incisions into the body. The internal surgical site and instruments are viewed remotely on a monitor using images obtained with an endoscopic camera. It is well recognized that the marked therapeutic benefits of MIS must be weighed against the increased technical difficulty for the surgeon and the ensuing risk of surgical errors. Here I describe the design, construction, and operation of teleoperated surgical instruments that solve several key problems in current minimally invasive surgical practice. These improvements are primarily achieved through (1) an increase in dexterity and degrees of freedom, (2) force feedback to allow surgeons to feel instrument-tissue interactions, and (3) the elimination of geometrical discrepancies between actual and observed tool motions. I present the design of two teleoperator slave manipulators for minimally invasive surgery, the seven- degree-of-freedom Silver Falcon and the eight-degree-of- freedom Black Falcon. Both systems were tested using an existing PHANToM TM haptic interface which was modified for use as a master manipulator. Position based bilateral force-reflecting teleoperation was implemented using sound cable design principles, without force sensors. Through the design of system dynamics that accommodate a macro-micro control scheme, a substantial reduction was achieved in slave endpoint inertia and friction reflected to the user. The Black Falcon was successfully used to drive surgical sutures along arbitrarily oriented paths, a task which is rarely feasible using today's instruments. This test demonstrates successful kinematic design and range of motion, although the quality of force reflection was not sufficient to be helpful when suturing soft tissue. Force reflection was found to be more useful during rigid contact tasks where force information is not already available to the operator via visual cues. (Copies

  11. Design and Implementation of Data Collection Instruments for Neonatology Research

    Directory of Open Access Journals (Sweden)

    Monica G. HĂŞMĂŞANU

    2014-12-01

    Full Text Available im: The aim of our research was to design and implement data collection instruments to be use in context of an observational prospective clinical study with follow-up conducted on new born with intrauterine growth restriction. Methods: The structure of the data collection forms (paper based and electronic based was first identified and for each variable the best type to accomplish the research aim was established. The code for categorical variables has also been decided as well as the units of measurements for quantitative variables. In respect of good practice, a set of confounding factors (as gender, date of birth, etc. have also been identified and integrated in data collection instruments. Data-entry validation rules were implemented for each variable to reduce data input errors when the electronic data collection instrument was created. Results: Two data collection instruments have been developed and successfully implemented: a paper-based form and an electronic data collection instrument. The developed forms included demographics, neonatal complications (as hypoglycemia, hypocalcemia, etc., biochemical data at birth and follow-up, immunological data, as well as basal and follow-up echocardiographic data. Data-entry validation criteria have been implemented in electronic data collection instrument to assure validity and precision when paper-based data are translated in electronic form. Furthermore, to assure subject’s confidentiality a careful attention was given to HIPPA identifiers when electronic data collection instrument was developed. Conclusion: Data collection instruments were successfully developed and implemented as an a priori step in a clinical research for assisting data collection and management in a case of an observational prospective study with follow-up visits.

  12. Remote sensing technology research and instrumentation platform design

    Science.gov (United States)

    1992-01-01

    An instrumented pallet concept and definition of an aircraft with performance and payload capability to meet NASA's airborne turbulent flux measurement needs for advanced multiple global climate research and field experiments is presented. The report addresses airborne measurement requirements for general circulation model sub-scale parameterization research, specifies instrumentation capable of making these measurements, and describes a preliminary support pallet design. Also, a review of aircraft types and a recommendation of a manned and an unmanned aircraft capable of meeting flux parameterization research needs is given.

  13. Photonic lantern behaviour and implications for instrument design

    Science.gov (United States)

    Horton, Anthony; Content, Robert; Ellis, Simon; Lawrence, Jon

    2014-07-01

    Photonic lanterns are an important enabling technology for astrophotonics with a wide range of potential applications including fibre Bragg grating OH suppression, integrated photonic spectrographs and fibre scramblers for high resolution spectroscopy. The behaviour of photonic lanterns differs in several important respects from the conventional fibre systems more frequently used in astronomical instruments and a detailed understanding of this behaviour is required in order to make the most effective use of this promising technology. To this end we have undertaken a laboratory study of photonic lanterns with the aim of developing an empirical model for the mapping from input to output illumination distributions. We have measured overall transmission and near field output light distributions as a function of input angle of incidence for photonic lanterns with between 19 and 61 cores. We present the results of this work, highlight the key differences between photonic lanterns and conventional fibres, and illustrate the implications for instrument design via a case study, the design of the PRAXIS spectrograph. The empirical photonic lantern model was incorporated into an end-to-end PRAXIS performance model which was used to optimise the design parameters of the instrument. We describe the methods used and the resulting conclusions. The details of photonic lantern behaviour proved particularly important in selecting the optimum on sky field of view per fibre and in modelling of the instrument thermal background.

  14. Measuring teamwork in health care settings: a review of survey instruments.

    Science.gov (United States)

    Valentine, Melissa A; Nembhard, Ingrid M; Edmondson, Amy C

    2015-04-01

    Teamwork in health care settings is widely recognized as an important factor in providing high-quality patient care. However, the behaviors that comprise effective teamwork, the organizational factors that support teamwork, and the relationship between teamwork and patient outcomes remain empirical questions in need of rigorous study. To identify and review survey instruments used to assess dimensions of teamwork so as to facilitate high-quality research on this topic. We conducted a systematic review of articles published before September 2012 to identify survey instruments used to measure teamwork and to assess their conceptual content, psychometric validity, and relationships to outcomes of interest. We searched the ISI Web of Knowledge database, and identified relevant articles using the search terms team, teamwork, or collaboration in combination with survey, scale, measure, or questionnaire. We found 39 surveys that measured teamwork. Surveys assessed different dimensions of teamwork. The most commonly assessed dimensions were communication, coordination, and respect. Of the 39 surveys, 10 met all of the criteria for psychometric validity, and 14 showed significant relationships to nonself-report outcomes. Evidence of psychometric validity is lacking for many teamwork survey instruments. However, several psychometrically valid instruments are available. Researchers aiming to advance research on teamwork in health care should consider using or adapting one of these instruments before creating a new one. Because instruments vary considerably in the behavioral processes and emergent states of teamwork that they capture, researchers must carefully evaluate the conceptual consistency between instrument, research question, and context.

  15. Optical Design of the WFIRST Phase-A Wide Field Instrument

    Science.gov (United States)

    Pasquale, Bert A.; Marx, Catherine T.; Gao, Guangjun; Armani, Nerses; Casey, Thomas

    2017-01-01

    The WFIRST Wide-Field Infrared Survey Telescope TMA optical design provides 0.28-sq degrees FOV at 0.11” pixel scale to the Wide Field Instrument, operating between 0.48-2.0 micrometers, including a spectrograph mode (1.0-2.0 micrometers). An Integral Field Channel provides 2-D discrete spectroscopy at 0.15” & 0.3” sampling.

  16. Advanced structural design for precision radial velocity instruments

    Science.gov (United States)

    Baldwin, Dan; Szentgyorgyi, Andrew; Barnes, Stuart; Bean, Jacob; Ben-Ami, Sagi; Brennan, Patricia; Budynkiewicz, Jamie; Chun, Moo-Young; Conroy, Charlie; Crane, Jeffrey D.; Epps, Harland; Evans, Ian; Evans, Janet; Foster, Jeff; Frebel, Anna; Gauron, Thomas; Guzman, Dani; Hare, Tyson; Jang, Bi-Ho; Jang, Jeong-Gyun; Jordan, Andres; Kim, Jihun; Kim, Kang-Min; Mendes de Oliveira, Claudia; Lopez-Morales, Mercedes; McCracken, Kenneth; McMuldroch, Stuart; Miller, Joseph; Mueller, Mark; Oh, Jae Sok; Ordway, Mark; Park, Byeong-Gon; Park, Chan; Park, Sung-Joon; Paxson, Charles; Phillips, David; Plummer, David; Podgorski, William; Seifahrt, Andreas; Stark, Daniel; Steiner, Joao; Uomoto, Alan; Walsworth, Ronald; Yu, Young-Sam

    2016-07-01

    The GMT-Consortium Large Earth Finder (G-CLEF) is an echelle spectrograph with precision radial velocity (PRV) capability that will be a first light instrument for the Giant Magellan Telescope (GMT). G-CLEF has a PRV precision goal of 40 cm/sec (10 cm/s for multiple measurements) to enable detection of Earth-like exoplanets in the habitable zones of sun-like stars1. This precision is a primary driver of G-CLEF's structural design. Extreme stability is necessary to minimize image motions at the CCD detectors. Minute changes in temperature, pressure, and acceleration environments cause structural deformations, inducing image motions which degrade PRV precision. The instrument's structural design will ensure that the PRV goal is achieved under the environments G-CLEF will be subjected to as installed on the GMT azimuth platform, including: Millikelvin (0.001 °K) thermal soaks and gradients 10 millibar changes in ambient pressure Changes in acceleration due to instrument tip/tilt and telescope slewing Carbon fiber/cyanate composite was selected for the optical bench structure in order to meet performance goals. Low coefficient of thermal expansion (CTE) and high stiffness-to-weight are key features of the composite optical bench design. Manufacturability and serviceability of the instrument are also drivers of the design. In this paper, we discuss analyses leading to technical choices made to minimize G-CLEF's sensitivity to changing environments. Finite element analysis (FEA) and image motion sensitivity studies were conducted to determine PRV performance under operational environments. We discuss the design of the optical bench structure to optimize stiffness-to-weight and minimize deformations due to inertial and pressure effects. We also discuss quasi-kinematic mounting of optical elements and assemblies, and optimization of these to ensure minimal image motion under thermal, pressure, and inertial loads expected during PRV observations.

  17. Survey design for blended acquisition

    NARCIS (Netherlands)

    Blacquière, G.; Berkhout, A.J.; Verschuur, D.J.

    2009-01-01

    When designing an acquisition geometry for the case of source blending, it is important that the blended source arrays are capable of transmitting a wavefield with a large spatial and temporal bandwidth: the wavefield must be incoherent. We call this incoherent shooting. Furthermore, the array must

  18. BUSINESS SURVEYS-EVALUATION INSTRUMENT OF THE EUROPEAN ECONOMIC CLIMATE

    Directory of Open Access Journals (Sweden)

    SECAREANU CONSTANTIN

    2010-07-01

    Full Text Available Business surveys or conjuncture surveys are specific statiostical researches, but complementary to traditional, official statistics.While official statistics provide quantitive information regardin the level,structure and evolution of varied economic process and phenomena, business surveys offer quality information, essential to the short term evolutional analysis of economic indicators: the diagnosis of the current situation, the timely detection of inflexion points within the economic cycle and the rapid estimation of short term tendencies of the main macroeconomic indicators (the dynamics of the gross domestic product, the index of industrial production, etc.

  19. Instrumental Genesis in GeoGebra Based Board Game Design

    DEFF Research Database (Denmark)

    Misfeldt, Morten

    2013-01-01

    for teaching skills with GeoGebra, as well as an entrepreneurial attitude towards mathematics. Using the instrumental approach I discuss how open ended transdisciplinary design activities can support instrumental genesis, by considering the extent to which the pupils address mathematical knowledge......In this paper I address the use of digital tools (GeoGebra) in open ended design activities, with primary school children. I present results from the research and development project “Creative Digital Mathematics”, which aims to use the pupil’s development of mathematical board games as a vehicle...... in their work with GeoGebra and how they relate their work with GeoGebra and mathematics to fellow pupils and real life situations. The results show that pupils’ consider development of board games as meaningful mathematical activity, and that they develop skills with GeoGebra, furthermore the pupils considers...

  20. LCLS Ultrafast Science Instruments:Conceptual Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Arthur, J.; Boutet, S.; Castagna, J-C.; Chapman, H.; Feng, Y.; Foyt, W.; Fritz, D.M.; Gaffney, K.J.; Gr|bel, G.; Hajdu, J.; Hastings, J.B.; Kurita, N.; Larsson, J.; Ludwig, K.; Messerschmidt, M.; Miao, J.; Reis, D.A.; Robert, A.; Stephenson, G.B.; Tschentscher, Th.; van Bakel, N.; /SLAC /LLNL, Livermore /DESY /Lund Inst. Tech. /Boston U. /UCLA /Michigan U. /Argonne

    2007-10-16

    The Stanford Linear Accelerator Center (SLAC), along with Argonne National Laboratory (ANL), Lawrence Livermore National Laboratory (LLNL), and the University of California at Los Angeles (UCLA), is constructing a Free-Electron Laser (FEL) facility, which will operate in the wavelength range 1.5 nm - 0.15 nm. This FEL, the Linac Coherent Light Source (LCLS), utilizes the SLAC linac and will produce sub-picosecond pulses of short wavelength X-rays with very high peak brightness and almost complete transverse coherence. The final one-third of the SLAC linac will be used as the source of electrons for the LCLS. The high energy electrons will be transported across the SLAC Research Yard, into a tunnel which will house a long undulator. In passing through the undulator, the electrons will be bunched by the force of their own synchrotron radiation and produce an intense, monochromatic, spatially coherent beam of X-rays. By varying the electron energy, the FEL X-ray wavelength will be tunable from 1.5 nm to 0.15 nm. The LCLS will include two experimental halls as well as X-ray optics and infrastructure necessary to create a facility that can be developed for research in a variety of disciplines such as atomic physics, materials science, plasma physics and biosciences. This Conceptual Design Report, the authors believe, confirms the feasibility of designing and constructing three X-ray instruments in order to exploit the unique scientific capability of this new LCLS facility. The technical objective of the LCLS Ultrafast Science Instruments (LUSI) project is to design, build, and install at the LCLS three hard X-ray instruments that will complement the initial instrument included in the LCLS construction. As the science programs advance and new technological challenges appear, instrumentation needs to be developed and ready to conquer these new opportunities. The LCLS instrument concepts have been developed in close consultation with the scientific community through a

  1. Measuring Quality of Life: A New and Practical Survey Instrument.

    Science.gov (United States)

    Greenley, James R.; Greenberg, Jan Steven; Brown, Roger

    1997-01-01

    Presents a new, short, self-administered questionnaire that assesses the quality of life in seven areas. Evidence for the reliability and validity of the questionnaire was based on data gathered from 971 clients; results indicate instrument reliability. The questionnaire features low-cost administration and valid psychometric properties. (RJM)

  2. Language Awareness Surveys: A Rationale and Three Instruments.

    Science.gov (United States)

    Belanger, Joe

    Noting that language study (one leg of the traditional English tripod of language, literature, and composition) has received mixed attention internationally and is almost forgotten in North America, this paper presents a rationale for researching language awareness and three instruments that can be used in such research. The paper begins with…

  3. Estimates from two survey designs: national hospital discharge survey.

    Science.gov (United States)

    Haupt, B J; Kozak, L J

    1992-05-01

    The methodology for the National Hospital Discharge Survey (NHDS) has been revised in several ways. These revisions, which were implemented for the 1988 NHDS, included adoption of a different hospital sampling frame, changes in the sampling design (in particular the implementation of a three-stage design), increased use of data purchased from abstracting service organizations, and adjustments to the estimation procedures used to derive the national estimates. To investigate the effects of these revisions on the estimates of hospital use from the NHDS, data were collected from January through March of 1988 using both the old and the new survey methods. This study compared estimates based on the old and the new survey methods for a variety of hospital and patient characteristics. Although few estimates were identical across survey methodologies, most of the variations could be attributed to sampling error. Estimates from two different samples of the same population would be expected to vary by chance even if precisely the same methods were used to collect and process the data. Because probability samples were used for the old and new survey methodologies, sampling error could be measured. Approximate relative standard errors were calculated for the estimates using the old and new survey methods. Taking these errors into account, less than 10 percent of the estimates were found to differ across survey methodologies at the 0.05 level of significance. Because a large number of comparisons were made, 5 percent of the estimates could have been found to be significantly different by chance alone. When there were statistically significant differences in nonmedical data, the new methods appeared to produce more accurate estimates than the old methods did. Race was more likely to be reported using the new methods. "New" estimates for hospitals in the West Region and government-owned hospitals were more similar than the corresponding "old" estimates to data from the census of

  4. The SAMI Galaxy Survey: instrument specification and target selection

    CERN Document Server

    Bryant, J J; Robotham, A S G; Croom, S M; Driver, S P; Drinkwater, M J; Lorente, N P F; Cortese, L; Scott, N; Colless, M; Schaefer, A; Taylor, E N; Konstantopoulos, I S; Allen, J T; Baldry, I; Barnes, L; Bauer, A E; Bland-Hawthorn, J; Bloom, J V; Brooks, A M; Brough, S; Cecil, G; Couch, W; Croton, D; Davies, R; Ellis, S; Fogarty, L M R; Foster, C; Glazebrook, K; Goodwin, M; Green, A; Gunawardhana, M L; Hampton, E; Ho, I -T; Hopkins, A M; Kewley, L; Lawrence, J S; Leon-Saval, S G; Leslie, S; Lewis, G; Liske, J; Lopez-Sanchez, A R; Mahajan, S; Medling, A M; Metcalfe, N; Meyer, M; Mould, J; Obreschkow, D; O'Toole, S; Pracy, M; Richards, S N; Shanks, T; Sharp, R; Sweet, S M; Thomas, A D; Tonini, C; Walcher, C J

    2014-01-01

    The SAMI Galaxy Survey will observe 3400 galaxies with the Sydney-AAO Multi-object Integral-field spectrograph (SAMI) on the Anglo-Australian Telescope (AAT) in a 3-year survey which began in 2013. We present the throughput of the SAMI system, the science basis and specifications for the target selection, the survey observation plan and the combined properties of the selected galaxies. The survey includes four volume limited galaxy samples based on cuts in a proxy for stellar mass, along with low-stellar mass dwarf galaxies all selected from the Galaxy And Mass Assembly (GAMA) survey. The GAMA regions were selected because of the vast array of ancillary data available, including ultraviolet through to radio bands. These fields are on the celestial equator at 9, 12, and 14.5 hours, and cover a total of 144 square degrees (in GAMA-I). Higher density environments are also included with the addition of eight clusters. The clusters have spectroscopy from 2dFGRS and SDSS and photometry in regions covered by the Slo...

  5. Site survey instrumentation for the National New Technology Telescope (NNTT)

    Science.gov (United States)

    Forbes, F. F.; Morse, D. A.; Poczulp, G. A.

    1988-10-01

    The characterization of atmospheric turbulence at and above the two candidate sites for the 15 m National New Technology Telescope (NNTT) has required the development of specialized measurement techniques. The equipment used to measure astronomical seeing, microthermals, water vapor, and temperature is discussed, along with sample data and calibration results. By use of instruments with overlapping altitude coverage, it has been possible to 'bookkeep' qualitatively all of the sources of innate degradation, especially near the ground.

  6. Cryogenic filter wheel design for an infrared instrument

    Science.gov (United States)

    Azcue, Joaquín.; Villanueva, Carlos; Sánchez, Antonio; Polo, Cristina; Reina, Manuel; Carretero, Angel; Torres, Josefina; Ramos, Gonzalo; Gonzalez, Luis M.; Sabau, Maria D.; Najarro, Francisco; Pintado, Jesús M.

    2014-09-01

    In the last two decades, Spain has built up a strong IR community which has successfully contributed to space instruments, reaching Co-PI level in the SPICA mission (Space Infrared Telescope for Cosmology and Astrophysics). Under the SPICA mission, INTA, focused on the SAFARI instrument requirements but highly adaptable to other missions has designed a cryogenic low dissipation filter wheel with six positions, taking as starting point the past experience of the team with the OSIRIS instrument (ROSETTA mission) filter wheels and adapting the design to work at cryogenic temperatures. One of the main goals of the mechanism is to use as much as possible commercial components and test them at cryogenic temperature. This paper is focused on the design of the filter wheel, including the material selection for each of the main components of the mechanism, the design of elastic mount for the filter assembly, a positioner device designed to provide positional accuracy and repeatability to the filter, allowing the locking of the position without dissipation. In order to know the position of the wheel on every moment a position sensor based on a Hall sensor was developed. A series of cryogenic tests have been performed in order to validate the material configuration selected, the ball bearing lubrication and the selection of the motor. A stepper motor characterization campaign was performed including heat dissipation measurements. The result is a six position filter wheel highly adaptable to different configurations and motors using commercial components. The mechanism was successfully tested at INTA facilities at 20K at breadboard level.

  7. Design of autotrack detecting instrument for solar UV radiation

    Science.gov (United States)

    Xia, Jiangtao; Mao, Xiaoli; Zhao, Jing

    2009-11-01

    In order to autotrack the object and detect the solar UV index, a reliable real-time high-precise instrument is proposed in this paper. This instrument involves two subsystems: the autotrack and detecting modules. The autotrack module consists of four-quadrant photo detector, multi-channel signal processing circuit and precise stepping system. The detecting module designed for dada measurement and acquisition is made up of the ultraviolet sensor UV460 and high precision A/D converter MAX1162. The key component of the entire instrument is ultralow-power microprocessor MSP430 which is used for entire system controlling and data processing. The lower system of autotracking and measurement is communicated with upper PC computer by RS232 module. In the experiment, the tracking precision of two-dimensional motion revolving stage is calibrated to be less than 0.05°. Experimental results indicate that the system designed could realize the precise autotracking and detecting function well, and the measure precision of system has reached the desirable target.

  8. The Hubble Space Telescope advanced camera for surveys coma cluster survey. I. Survey objectives and design

    NARCIS (Netherlands)

    Carter, David; Goudfrooij, Paul; Mobasher, Bahram; Ferguson, Henry C.; Puzia, Thomas H.; Aguerri, Alfonso L.; Balcells, Marc; Batcheldor, Dan; Bridges, Terry J.; Davies, Jonathan I.; Erwin, Peter; Graham, Alister W.; Guzmán, Rafael; Hammer, Derek; Hornschemeier, Ann; Hoyos, Carlos; Hudson, Michael J.; Huxor, Avon; Jogee, Shardha; Komiyama, Yutaka; Lotz, Jennifer; Lucey, John R.; Marzke, Ronald O.; Merritt, David; Miller, Bryan W.; Miller, Neal A.; Mouhcine, Mustapha; Okamura, Sadanori; Peletier, Reynier F.; Phillipps, Steven; Poggianti, Bianca M.; Sharples, Ray M.; Smith, Russell J.; Trentham, Neil; Tully, R. Brent; Valentijn, Edwin; Verdoes Kleijn, Gijs

    2008-01-01

    We describe the HST ACS Coma Cluster Treasury survey, a deep two-passband imaging survey of one of the nearest rich clusters of galaxies, the Coma Cluster (Abell 1656). The survey was designed to cover an area of 740 arcmin2 in regions of different density of both galaxies and intergalactic medium w

  9. School Leadership Preparation and Practice Survey Instruments and Their Uses

    Science.gov (United States)

    Pounder, Diana

    2012-01-01

    This article addresses the leadership preparation line of inquiry developed in the past decade by the University Council for Educational Administration/Learning and Teaching in Educational Leadership Special Interest Group Taskforce on Evaluating Leadership Preparation Programs, and it particularly addresses the series of survey instruments…

  10. Survey of instrumentation used for monitoring metals in water

    Energy Technology Data Exchange (ETDEWEB)

    Quinby-Hunt, M.S.

    1978-06-01

    A study was conducted of instrumentation used to determine metals in water. Several of the techniques most commonly used for analysis and routine determinations of metals in water are shown in Table 1. They are atomic absorption spectroscopy, both flame and flameless, atomic emission spectroscopy using conventional flame sources and inductively-coupled plasma sources, and ultraviolet-visible absorption techniques. Other less frequently employed methods are x-ray fluorescence analysis using both photon and charged particle excitation with energy-dispersive and wavelength-dispersive spectral analysis. Also electrochemical techniques and activation analysis are studied.

  11. Experimental design and quality assurance: in situ fluorescence instrumentation

    Science.gov (United States)

    Conmy, Robyn N.; Del Castillo, Carlos E.; Downing, Bryan D.; Chen, Robert F.

    2014-01-01

    Both instrument design and capabilities of fluorescence spectroscopy have greatly advanced over the last several decades. Advancements include solid-state excitation sources, integration of fiber optic technology, highly sensitive multichannel detectors, rapid-scan monochromators, sensitive spectral correction techniques, and improve data manipulation software (Christian et al., 1981, Lochmuller and Saavedra, 1986; Cabniss and Shuman, 1987; Lakowicz, 2006; Hudson et al., 2007). The cumulative effect of these improvements have pushed the limits and expanded the application of fluorescence techniques to numerous scientific research fields. One of the more powerful advancements is the ability to obtain in situ fluorescence measurements of natural waters (Moore, 1994). The development of submersible fluorescence instruments has been made possible by component miniaturization and power reduction including advances in light sources technologies (light-emitting diodes, xenon lamps, ultraviolet [UV] lasers) and the compatible integration of new optical instruments with various sampling platforms (Twardowski et at., 2005 and references therein). The development of robust field sensors skirt the need for cumbersome and or time-consuming filtration techniques, the potential artifacts associated with sample storage, and coarse sampling designs by increasing spatiotemporal resolution (Chen, 1999; Robinson and Glenn, 1999). The ability to obtain rapid, high-quality, highly sensitive measurements over steep gradients has revolutionized investigations of dissolved organic matter (DOM) optical properties, thereby enabling researchers to address novel biogeochemical questions regarding colored or chromophoric DOM (CDOM). This chapter is dedicated to the origin, design, calibration, and use of in situ field fluorometers. It will serve as a review of considerations to be accounted for during the operation of fluorescence field sensors and call attention to areas of concern when making

  12. The Laboratory Course Assessment Survey: A Tool to Measure Three Dimensions of Research-Course Design

    Science.gov (United States)

    Corwin, Lisa A.; Runyon, Christopher; Robinson, Aspen; Dolan, Erin L.

    2015-01-01

    Course-based undergraduate research experiences (CUREs) are increasingly being offered as scalable ways to involve undergraduates in research. Yet few if any design features that make CUREs effective have been identified. We developed a 17-item survey instrument, the Laboratory Course Assessment Survey (LCAS), that measures students' perceptions…

  13. Helical channel multiplier package design for space instrumentation

    Science.gov (United States)

    Hoshiko, H. H.

    1975-01-01

    The package considered is intended for the channel electron multiplier (CEM) detectors which are to be used for the extreme ultraviolet telescope and helium glow detector instruments of the Apollo-Soyuz test project. In the package design selected, the cone of the CEM is supported at the front end by a silicone rubber ring which is molded in place and self-bonded to both the cone and the housing wall. The helix is supported and insulated from the housing by a fiber glass sleeve which is bonded to the inside of the housing.

  14. Matter in Extreme Conditions Instrument - Conceptual Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Boyce, R.F.; Boyce, R.M.; Haller, G.; Hastings, J.B.; Hays, G.; Lee, H.J.; /SLAC; Lee, R.W.; /LLNL, Livermore; Nagler, B.; /Rutherford; Scharfenstein, M.; Marsh, D.; White, W.E.; /SLAC

    2009-12-09

    The SLAC National Accelerator Laboratory (SLAC), in collaboration with Argonne National Laboratory (ANL), Lawrence Livermore National Laboratory (LLNL), and the University of California at Los Angeles (UCLA), is constructing a Free-Electron Laser (FEL) research facility. The FEL has already met its performance goals in the wavelength range 1.5 nm - 0.15 nm. This facility, the Linac Coherent Light Source (LCLS), utilizes the SLAC 2-Mile Linear Accelerator (linac) and will produce sub-picosecond pulses of short wavelength X-rays with very high peak brightness and almost complete transverse coherence. The final one-third of the SLAC linac is used as the source of electrons for the LCLS. The high energy electrons are transported across the SLAC Research Yard, into a tunnel which houses a long undulator. In passing through the undulator, the electrons are bunched by the force of their own synchrotron radiation and produce an intense, monochromatic, spatially coherent beam of X-rays. By varying the electron energy, the FEL X-ray wavelength is tunable from 1.5 nm to 0.15 nm. The LCLS includes two experimental halls as well as X-ray optics and infrastructure necessary to create a facility that can be developed for research in a variety of disciplines such as atomic physics, materials science, plasma physics and biosciences. This Conceptual Design Report, the authors believe, confirms the feasibility of designing and constructing an X-ray instrument in order to exploit the unique scientific capability of LCLS by creating extreme conditions and study the behavior of plasma under those controlled conditions. This instrument will address the Office of Science, Fusion Energy Sciences, mission objective related to study of Plasma and Warm Dense Matter as described in the report titled LCLS, the First Experiments, prepared by the LCLS Scientific Advisory Committee (SAC) in September 2000. The technical objective of the LCLS Matter in Extreme Conditions (MEC) Instrument project is

  15. Matter in Extreme Conditions Instrument - Conceptual Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Boyce, R.F.; Boyce, R.M.; Haller, G.; Hastings, J.B.; Hays, G.; Lee, H.J.; /SLAC; Lee, R.W.; /LLNL, Livermore; Nagler, B.; /Rutherford; Scharfenstein, M.; Marsh, D.; White, W.E.; /SLAC

    2009-12-09

    The SLAC National Accelerator Laboratory (SLAC), in collaboration with Argonne National Laboratory (ANL), Lawrence Livermore National Laboratory (LLNL), and the University of California at Los Angeles (UCLA), is constructing a Free-Electron Laser (FEL) research facility. The FEL has already met its performance goals in the wavelength range 1.5 nm - 0.15 nm. This facility, the Linac Coherent Light Source (LCLS), utilizes the SLAC 2-Mile Linear Accelerator (linac) and will produce sub-picosecond pulses of short wavelength X-rays with very high peak brightness and almost complete transverse coherence. The final one-third of the SLAC linac is used as the source of electrons for the LCLS. The high energy electrons are transported across the SLAC Research Yard, into a tunnel which houses a long undulator. In passing through the undulator, the electrons are bunched by the force of their own synchrotron radiation and produce an intense, monochromatic, spatially coherent beam of X-rays. By varying the electron energy, the FEL X-ray wavelength is tunable from 1.5 nm to 0.15 nm. The LCLS includes two experimental halls as well as X-ray optics and infrastructure necessary to create a facility that can be developed for research in a variety of disciplines such as atomic physics, materials science, plasma physics and biosciences. This Conceptual Design Report, the authors believe, confirms the feasibility of designing and constructing an X-ray instrument in order to exploit the unique scientific capability of LCLS by creating extreme conditions and study the behavior of plasma under those controlled conditions. This instrument will address the Office of Science, Fusion Energy Sciences, mission objective related to study of Plasma and Warm Dense Matter as described in the report titled LCLS, the First Experiments, prepared by the LCLS Scientific Advisory Committee (SAC) in September 2000. The technical objective of the LCLS Matter in Extreme Conditions (MEC) Instrument project is

  16. Design Considerations for a Launch Vehicle Development Flight Instrumentation System

    Science.gov (United States)

    Johnson, Martin L.; Crawford, Kevin

    2011-01-01

    When embarking into the design of a new launch vehicle, engineering models of expected vehicle performance are always generated. While many models are well established and understood, some models contain design features that are only marginally known. Unfortunately, these analytical models produce uncertainties in design margins. The best way to answer these analytical issues is with vehicle level testing. The National Aeronautics and Space Administration respond to these uncertainties by using a vehicle level system called the Development Flight Instrumentation, or DFI. This DFI system can be simple to implement, with only a few measurements, or it may be a sophisticated system with hundreds of measurement and video, without a recording capability. From experience with DFI systems, DFI never goes away. The system is renamed and allowed to continue, in most cases. Proper system design can aid the transition to future data requirements. This paper will discuss design features that need to be considered when developing a DFI system for a launch vehicle. It will briefly review the data acquisition units, sensors, multiplexers and recorders, telemetry components and harnessing. It will present a reasonable set of requirements which should be implemented in the beginning of the program in order to start the design. It will discuss a simplistic DFI architecture that could be the basis for the next NASA launch vehicle. This will be followed by a discussion of the "experiences gained" from a past DFI system implementation, such as the very successful Ares I-X test flight. Application of these design considerations may not work for every situation, but they may direct a path toward success or at least make one pause and ask the right questions.

  17. Instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2001-04-01

    SCK-CEN's research and development programme on instrumentation involves the assessment and the development of sensitive measurement systems used within a radiation environment. Particular emphasis is on the assessment of optical fibre components and their adaptability to radiation environments. The evaluation of ageing processes of instrumentation in fission plants, the development of specific data evaluation strategies to compensate for ageing induced degradation of sensors and cable performance form part of these activities. In 2000, particular emphasis was on in-core reactor instrumentation applied to fusion, accelerator driven and water-cooled fission reactors. This involved the development of high performance instrumentation for irradiation experiments in the BR2 reactor in support of new instrumentation needs for MYRRHA, and for diagnostic systems for the ITER reactor.

  18. Recent advances in cardiac SPECT instrumentation and system design.

    Science.gov (United States)

    Smith, Mark F

    2013-08-01

    Recent advances in clinical cardiac SPECT instrumentation are reviewed from a systems perspective. New hardware technologies include pixelated scintillator and semiconductor detector elements; photodetectors such as position-sensitive photomultiplier tubes (PSPMT), avalanche photodiodes (APD) and silicon photomultipliers (SiPM); and novel cardiac collimation methods. There are new approaches for positioning detectors and controlling their motion during cardiac imaging. Software technology advances include iterative image reconstruction with modeling of Poisson statistics and depth-dependent collimator response. These new technologies enable faster acquisitions, the lowering of administered activity and radiation dose, and improved image resolution. Higher sensitivity collimators are a significant factor enabling faster acquisitions. Several clinical systems incorporating new technologies are discussed and different system designs can achieve similar performance. With detector elements such as APDs, SiPMs and semiconductors that are insensitive to magnetic fields, the potential for cardiac SPECT imagers that are MRI compatible opens up new frontiers in clinical cardiac research and patient care.

  19. Design Analyses and Shielding of HFIR Cold Neutron Scattering Instruments

    Energy Technology Data Exchange (ETDEWEB)

    Gallmeier, F.X.; Selby, D.L.; Winn, B.; Stoica, D.; Jones, A.B.; Crow, L. [Neutron Sciences Directorate, Oak Ridge National Laboratory (United States)

    2011-07-01

    Research reactor geometries and special characteristics present unique dosimetry analysis and measurement issues. The introduction of a cold neutron moderator and the production of cold neutron beams at the Oak Ridge National Laboratory High Flux Isotope Reactor have created the need for modified methods and devices for analyzing and measuring low energy neutron fields (0.01 to 100 meV). These methods include modifications to an MCNPX version to provide modeling of neutron mirror reflection capability. This code has been used to analyze the HFIR cold neutron beams and to design new instrument equipment that will use the beams. Calculations have been compared with time-of-flight measurements performed at the start of the neutron guides and at the end of one of the guides. The results indicate that we have a good tool for analyzing the transport of these low energy beams through neutron mirror and guide systems for distance up to 60 meters from the reactor. (authors)

  20. USE OF LEAN PRODUCTION INSTRUMENTS IN DESIGNING THE EDUCATIONAL PROCESS

    Directory of Open Access Journals (Sweden)

    Elietta P. Burnasheva

    2016-03-01

    Full Text Available Introduction: the concept of lean production seeks not a reduction of costs but complete elimination of losses that do not bring added value to the product or service. In any system, in all processes – from production and assembly, to hospitality, education, health, transport and social services – there are hidden losses. Teaching itself is a kind of production process in which a certain “product” (student acquires the added value (knowledge and skills, that is why it has become topical in educational institution to establish the working group on introduction of lean production into the learning process. The article presents the factors that are to be taken into account while designing the educational process based on the lean production principles. Materials and Methods: methods of analysis of existing system of vocational training in higher school, monitoring of the results of educational practice, modeling and experimental work in the process of analytical work were used. Results: important direction for eliminating losses in the educational process is the development of the interlinked curricula, allowing to avoid repeated study of a number of didactic units in the organization of continuous training in the system “Vocational education – Higher education”. In order to eliminate the possibility of incompetent graduate one should focus on the organisation of objective final control. Losses in education are caused by to the mismatch between labour market demand and the spectrum of areas of training in educational institutions. Discussion and Conclusions: the lean production possibilities are defined as instrumental in ensuring the organisation of “the process of lean learning”: by applying some lean production instruments such as the designing of the educational process, preventing of “faulty work” while training students, the attuning of the training system to employers’ requests, the visualisation of the education

  1. Reliability Design in Structural Optimization - Literature Survey

    OpenAIRE

    Tapankov, Martin

    2013-01-01

    This survey focuses primarily on the historical development of RBDO and the various classes of methods which emerged through the years. While reviews on contemporary RBDO methods have been done previously, they haven’t incorporated the basis on which such developments were possible in the first place — risk-based design and limit-state design. This study attempts to link the RBDO field with these methodologies for a more complete picture of the field of reliability and safety. ProOpt

  2. Using Moodle as On-line Survey Instrument in Medical Education

    Directory of Open Access Journals (Sweden)

    Dan ISTRATE

    2013-02-01

    Full Text Available One of the principal issues in any university community is the lack of communication between community categories – leadership, administration, teaching staff and students. Sometimes is important to know in a short time the opinion of one particular group, without investing a lot of resources and without being extremely formal. The aim of this study was to test if an open-source platform – Moodle – can be used for quick surveys inside the Faculty of Medicine, UMF “Iuliu Hatieganu” Cluj-Napoca community. For this, on existing Moodle platform was installed one specific survey instrument – a questionnaire module and a survey containing a real life issue to the students of Faculty of Medicine was launched. The researchers have focused on how the specific problems of a survey - preparing of the survey, the survey process and the analysis of the results can be handle in Moodle. The pilot survey was a success; the conclusion of the study was that Moodle can be used as on-line survey instrument for that community.

  3. Instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2002-04-01

    SCK-CEN's R and D programme on instrumentation involves the development of advanced instrumentation systems for nuclear applications as well as the assessment of the performance of these instruments in a radiation environment. Particular emphasis is on the use of optical fibres as umbilincal links of a remote handling unit for use during maintanance of a fusion reacor, studies on the radiation hardening of plasma diagnostic systems; investigations on new instrumentation for the future MYRRHA accelerator driven system; space applications related to radiation-hardened lenses; the development of new approaches for dose, temperature and strain measurements; the assessment of radiation-hardened sensors and motors for remote handling tasks and studies of dose measurement systems including the use of optical fibres. Progress and achievements in these areas for 2001 are described.

  4. Instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    2000-07-01

    SCK-CEN's research and development programme on instrumentation aims at evaluating the potentials of new instrumentation technologies under the severe constraints of a nuclear application. It focuses on the tolerance of sensors to high radiation doses, including optical fibre sensors, and on the related intelligent data processing needed to cope with the nuclear constraints. Main achievements in these domains in 1999 are summarised.

  5. Development and validation of a survey instrument to measure children's advertising literacy

    NARCIS (Netherlands)

    Rozendaal, E.; Opree, S.J.; Buijzen, M.A.

    2016-01-01

    The aim of this study was to develop and validate a survey measurement instrument for children's advertising literacy. Based on the multidimensional conceptualization of advertising literacy by 0056"> Rozendaal, Lapierre, Van Reijmersdal, and Buijzen (2011), 39 items were created to measure two d

  6. Establishing Educational Priorities through the Illinois Problems Index. Survey Instruments [and] User's Manual.

    Science.gov (United States)

    Illinois State Board of Education, Springfield.

    The Illinois Problems Index (IPI), a process with supporting survey instruments, enables local school districts to assess and evaluate the adequacy of current programs and services and plan improvements where problems exist. A User's Manual provides a step-by-step "walk through" of the process, while permitting alternative techniques for…

  7. Development and validation of a survey instrument to measure children's advertising literacy

    NARCIS (Netherlands)

    Rozendaal, E.; Opree, S.J.; Buijzen, M.A.

    2016-01-01

    The aim of this study was to develop and validate a survey measurement instrument for children's advertising literacy. Based on the multidimensional conceptualization of advertising literacy by 0056"> Rozendaal, Lapierre, Van Reijmersdal, and Buijzen (2011), 39 items were created to measure two

  8. Students' Initial Knowledge State and Test Design: Towards a Valid and Reliable Test Instrument

    Science.gov (United States)

    CoPo, Antonio Roland I.

    2015-01-01

    Designing a good test instrument involves specifications, test construction, validation, try-out, analysis and revision. The initial knowledge state of forty (40) tertiary students enrolled in Business Statistics course was determined and the same test instrument undergoes validation. The designed test instrument did not only reveal the baseline…

  9. Comparing NICU teamwork and safety climate across two commonly used survey instruments.

    Science.gov (United States)

    Profit, Jochen; Lee, Henry C; Sharek, Paul J; Kan, Peggy; Nisbet, Courtney C; Thomas, Eric J; Etchegaray, Jason M; Sexton, Bryan

    2016-12-01

    Measurement and our understanding of safety culture are still evolving. The objectives of this study were to assess variation in safety and teamwork climate and in the neonatal intensive care unit (NICU) setting, and compare measurement of safety culture scales using two different instruments (Safety Attitudes Questionnaire (SAQ) and Hospital Survey on Patient Safety Culture (HSOPSC)). Cross-sectional survey study of a voluntary sample of 2073 (response rate 62.9%) health professionals in 44 NICUs. To compare survey instruments, we used Spearman's rank correlation coefficients. We also compared similar scales and items across the instruments using t tests and changes in quartile-level performance. We found significant variation across NICUs in safety and teamwork climate scales of SAQ and HSOPSC (pteamwork scales (teamwork climate and teamwork within units) of the two instruments correlated strongly (safety r=0.72, pteamwork r=0.67, p<0.001). However, the means and per cent agreements for all scale scores and even seemingly similar item scores were significantly different. In addition, comparisons of scale score quartiles between the two instruments revealed that half of the NICUs fell into different quartiles when translating between the instruments. Large variation and opportunities for improvement in patient safety culture exist across NICUs. Important systematic differences exist between SAQ and HSOPSC such that these instruments should not be used interchangeably. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  10. Organizational member involvement in physical activity coalitions across the United States: development and testing of a novel survey instrument for assessing coalition functioning.

    Science.gov (United States)

    Bornstein, Daniel B; Pate, Russell R; Beets, Michael W; Saunders, Ruth P; Blair, Steven N

    2015-06-01

    Coalitions are often composed of member organizations. Member involvement is thought to be associated with coalition success. No instrument currently exists for evaluating organizational member involvement in physical activity coalitions. This study aimed to develop a survey instrument for evaluating organizational member involvement in physical activity coalitions. The study was carried out in three phases: (a) developing a draft survey, (b) assessing the content validity of the draft survey, and (c) assessing the underlying factor structure, reliability, and validity of the survey. A cross-sectional design was employed. In Phase 1, a team of experts in survey development produced a draft survey. In Phase 2, the content validity of the draft survey was evaluated by a panel of individuals with expertise in physical activity coalitions. In Phase 3, the survey was administered to 120 individuals on local-, state-, and national-level physical activity coalitions. Responses were subjected to an exploratory factor analysis in order to determine the survey's underlying factor structure, reliability, and validity. Phases 1 and 2yielded a survey instrument with demonstrated content validity. Phase 3 yielded a three-factor model with three subscales: Strategic Alignment, Organizational Alignment, and Providing Input. Each subscale demonstrated high internal consistency reliability and construct validity. The survey instrument developed here demonstrated sound psychometric properties and provides new insight into organizational member involvement in physical activity coalitions. This instrument may be an important tool in developing a more complete picture of coalition functioning in physical activity coalitions specifically and health-based coalitions overall. © 2014 Society for Public Health Education.

  11. Iranian mental health survey: design and field proced.

    Directory of Open Access Journals (Sweden)

    Afarin Rahimi-Movaghar

    2014-06-01

    Full Text Available Iranian Mental Health Survey (IranMHS was conducted to assess the twelve-month prevalence and severity of psychiatric disorders in the Iranian adult population and to determine the pattern of health care utilization and cost of services. IranMHS is a cross-sectional national household survey with face-to-face interviews as the main data collection method. The study was carried out between January and June 2011. A three-stage probability sampling was applied for the selection of a representative sample from the non-institutionalized population aged 15 to 64. The primary instrument utilized for assessing the prevalence of mental disorders was the Persian version of Composite International Diagnosis Interview, version 2.1. The instruments for assessing the service and cost of mental illness were developed by the research team. The response rate was 86.2%, and a total of 7886 individuals participated in the study. Sampling weights were the joint product of inverse probability of unit selection, non-response weights and post-stratification weights. This paper presents an overview of the study design, fieldwork organization and procedures, weightings and analysis. The strengths and limitations of the study are also discussed.

  12. Economic instruments for obesity prevention: results of a scoping review and modified delphi survey

    Directory of Open Access Journals (Sweden)

    LaFrance Jeffrey

    2011-10-01

    Full Text Available Abstract Background Comprehensive, multi-level approaches are required to address obesity. One important target for intervention is the economic domain. The purpose of this study was to synthesize existing evidence regarding the impact of economic policies targeting obesity and its causal behaviours (diet, physical activity, and to make specific recommendations for the Canadian context. Methods Arksey and O'Malley's (2005 methodological framework for conducting scoping reviews was adopted for this study and this consisted of two phases: 1 a structured literature search and review, and 2 consultation with experts in the research field through a Delphi survey and an in-person expert panel meeting in April 2010. Results Two key findings from the scoping review included 1 consistent evidence that weight outcomes are responsive to food and beverage prices. The debate on the use of food taxes and subsidies to address obesity should now shift to how best to address practical issues in designing such policies; and 2 very few studies have examined the impact of economic instruments to promote physical activity and clear policy recommendations cannot be made at this time. Delphi survey findings emphasised the relatively modest impact any specific economic instrument would have on obesity independently. Based on empirical evidence and expert opinion, three recommendations were supported. First, to create and implement an effective health filter to review new and current agricultural polices to reduce the possibility that such policies have a deleterious impact on population rates of obesity. Second, to implement a caloric sweetened beverage tax. Third, to examine how to implement fruit and vegetable subsidies targeted at children and low income households. Conclusions In terms of economic interventions, shifting from empirical evidence to policy recommendation remains challenging. Overall, the evidence is not sufficiently strong to provide clear policy

  13. Instruments

    Energy Technology Data Exchange (ETDEWEB)

    Buehrer, W. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1996-12-31

    The present paper mediates a basic knowledge of the most commonly used experimental techniques. We discuss the principles and concepts necessary to understand what one is doing if one performs an experiment on a certain instrument. (author) 29 figs., 1 tab., refs.

  14. Origins Space Telescope: Telescope Design and Instrument Specifications

    Science.gov (United States)

    Meixner, Margaret; Carter, Ruth; Leisawitz, David; Dipirro, Mike; Flores, Anel; Staguhn, Johannes; Kellog, James; Roellig, Thomas L.; Melnick, Gary J.; Bradford, Charles; Wright, Edward L.; Zmuidzinas, Jonas; Origins Space Telescope Study Team

    2017-01-01

    The Origins Space Telescope (OST) is the mission concept for the Far-Infrared Surveyor, one of the four science and technology definition studies of NASA Headquarters for the 2020 Astronomy and Astrophysics Decadal survey. The renaming of the mission reflects Origins science goals that will discover and characterize the most distant galaxies, nearby galaxies and the Milky Way, exoplanets, and the outer reaches of our Solar system. This poster will show the preliminary telescope design that will be a large aperture (>8 m in diameter), cryogenically cooled telescope. We will also present the specifications for the spectrographs and imagers over a potential wavelength range of ~10 microns to 1 millimeter. We look forward to community input into this mission definition over the coming year as we work on the concept design for the mission. Origins will enable flagship-quality general observing programs led by the astronomical community in the 2030s. We welcome you to contact the Science and Technology Definition Team (STDT) with your science needs and ideas by emailing us at firsurveyor_info@lists.ipac.caltech.edu.

  15. Six-Degree-of-Freedom Sensor Fish Design and Instrumentation

    Directory of Open Access Journals (Sweden)

    Marshall C. Richmond

    2007-11-01

    Full Text Available Fish passing through dams may be injured or killed despite advances in turbinedesign, project operations and other fish bypass systems. The six-degree-of-freedom (6DOFSensor Fish device is an autonomous sensor package that characterizes the physical conditionsand physical stresses to which fish are exposed when they pass through complex hydraulicenvironments. It has been used to identify the locations and operations where conditions aresevere enough to injure or kill fish. During the design process, a set of governing equationsof motion for the Sensor Fish was derived and simulated to understand the design implica-tions of instrument selection and placement within the body of the device. The Sensor Fishpackage includes three rotation sensors, three acceleration sensors, a pressure sensor, and atemperature sensor with a sampling frequency of 2,000 Hz. Its housing is constructed of clearpolycarbonate plastic. It is 24.5 mm in diameter and 90 mm in length and weighs about 43 g,similar to the size and density of a yearling salmon smolt. The accuracy of the pressure sensorwas determined to be within 0.2 psi. In laboratory acceptance tests, the relative errors of boththe linear acceleration and angular velocity measurements were determined to be less than5%. An exposure is defined as a significant event when the acceleration reaches predefinedthresholds. Based on the different characteristic of acceleration and rotation velocities, theexposure event is categorized as either a collision between the Sensor Fish and a solid struc-ture or shear caused by turbulence. Since its development in 2005, the 6DOF Sensor Fish hasbeen deployed successfully at many major dams in the United States.

  16. Understanding Teachers' Conceptions of Classroom Inquiry With a Teaching Scenario Survey Instrument

    Science.gov (United States)

    Kang, Nam-Hwa; Orgill, Marykay; Crippen, Kent J.

    2008-08-01

    A survey instrument using everyday teaching scenarios was developed to measure teacher conceptions of inquiry. Validity of the instrument was established by comparing responses for a group of secondary teachers to narrative writing and group discussion. Participating teachers used only three of the five essential features of inquiry detailed in the standards documents (NRC 2000) when expressing their ideas of classroom inquiry. The features of ‘evaluating explanations in connection with scientific knowledge’ and ‘communicating explanations’ were rarely mentioned. These missing components indicate a gap between the teachers’ conceptions of inquiry and the ideals of the reform movement.

  17. Cost-effective design of economic instruments in nutrition policy.

    Science.gov (United States)

    Jensen, Jørgen D; Smed, Sinne

    2007-04-04

    This paper addresses the potential for using economic regulation, e.g. taxes or subsidies, as instruments to combat the increasing problems of inappropriate diets, leading to health problems such as obesity, diabetes 2, cardiovascular diseases etc. in most countries. Such policy measures may be considered as alternatives or supplements to other regulation instruments, including information campaigns, bans or enhancement of technological solutions to the problems of obesity or related diseases. 7 different food tax and subsidy instruments or combinations of instruments are analysed quantitatively. The analyses demonstrate that the average cost-effectiveness with regard to changing the intake of selected nutritional variables can be improved by 10-30 per cent if taxes/subsidies are targeted against these nutrients, compared with targeting selected food categories. Finally, the paper raises a range of issues, which need to be investigated further, before firm conclusions about the suitability of economic instruments in nutrition policy can be drawn.

  18. Cost-effective design of economic instruments in nutrition policy

    Directory of Open Access Journals (Sweden)

    Smed Sinne

    2007-04-01

    Full Text Available Abstract This paper addresses the potential for using economic regulation, e.g. taxes or subsidies, as instruments to combat the increasing problems of inappropriate diets, leading to health problems such as obesity, diabetes 2, cardiovascular diseases etc. in most countries. Such policy measures may be considered as alternatives or supplements to other regulation instruments, including information campaigns, bans or enhancement of technological solutions to the problems of obesity or related diseases. 7 different food tax and subsidy instruments or combinations of instruments are analysed quantitatively. The analyses demonstrate that the average cost-effectiveness with regard to changing the intake of selected nutritional variables can be improved by 10–30 per cent if taxes/subsidies are targeted against these nutrients, compared with targeting selected food categories. Finally, the paper raises a range of issues, which need to be investigated further, before firm conclusions about the suitability of economic instruments in nutrition policy can be drawn.

  19. The Mathematics Attitudes and Perceptions Survey: an instrument to assess expert-like views and dispositions among undergraduate mathematics students

    Science.gov (United States)

    Code, Warren; Merchant, Sandra; Maciejewski, Wes; Thomas, Matthew; Lo, Joseph

    2016-08-01

    One goal of an undergraduate education in mathematics is to help students develop a productive disposition towards mathematics. A way of conceiving of this is as helping mathematical novices transition to more expert-like perceptions of mathematics. This conceptualization creates a need for a way to characterize students' perceptions of mathematics in authentic educational settings. This article presents a survey, the Mathematics Attitudes and Perceptions Survey (MAPS), designed to address this need. We present the development of the MAPS instrument and its validation on a large (N = 3411) set of student data. Results from various MAPS implementations corroborate results from analogous instruments in other STEM disciplines. We present these results and highlight some in particular: MAPS scores correlate with course grades; students tend to move away from expert-like orientations over a semester or year of taking a mathematics course; and interactive-engagement type lectures have less of a negative impact, but no positive impact, on students' overall orientations than traditional lecturing. We include the MAPS instrument in this article and suggest ways in which it may deepen our understanding of undergraduate mathematics education.

  20. Design of a TFT-LCD Based Digital Automobile Instrument

    Directory of Open Access Journals (Sweden)

    Yunsong Xu

    2014-01-01

    instrument and gives an introduction to the sampling circuits and interfaces related to these signals. Following this is the functional categorizing of the circuit modules, such as video buffer circuit, CAN bus interface circuit, and TFT-LCD drive circuit. Additionally, the external EEPROM stores information of the vehicle for history data query, and the external FLASH enables the display of high quality figures. On the whole, the accomplished automobile instrument meets the requirements of automobile instrument markets with its characters of low cost, favorable compatibility, friendly interfaces, and easy upgrading.

  1. Cost-effective design of economic instruments in nutrition policy

    DEFF Research Database (Denmark)

    Jensen, Jørgen Dejgård; Smed, Sinne

    2007-01-01

    This paper addresses the potential for using economic regulation, e.g. taxes or subsidies, as instruments to combat the increasing problems of inappropriate diets, leading to health problems such as obesity, diabetes 2, cardiovascular diseases etc. in most countries. Such policy measures may...... be considered as alternatives or supplements to other regulation instruments, including information campaigns, bans or enhancement of technological solutions to the problems of obesity or related diseases. 7 different food tax and subsidy instruments or combinations of instruments are analysed quantitatively....... The analyses demonstrate that the average cost-effectiveness with regard to changing the intake of selected nutritional variables can be improved by 10–30 per cent if taxes/subsidies are targeted against these nutrients, compared with targeting selected food categories. Finally, the paper raises a range...

  2. Design for Restoration: beyond the survey

    Directory of Open Access Journals (Sweden)

    Giovanni Carbonara

    2015-01-01

    Full Text Available  This new issue, that we can define special, marks an important change for DISEGNARECON (its transfer from the University of Bologna to the University of L’Aquila facing the topic of the Design for the Restoration in a way that is special too. Treated in fact - beside the outgoing editor in chief, Roberto Mingucci - by Mario Centofanti, who now assumes the responsibility for the magazine, and Giovanni Carbonara, which is definitely authoritative reference in the field. Sharing a strong interest for communicating the Restoration Project, they intended to indicate the substantial union of methods and objectives between the disciplines of architectural survey and of restoration, which makes the meaning of an aggregation now also institutionally formalized and particularly significant for the project on the existing architecture. 

  3. Evaluation of a Brief Survey Instrument for Assessing Subtle Differences in Cognitive Function Among Older Adults.

    Science.gov (United States)

    Kotwal, Ashwin A; Schumm, Philip; Kern, David W; McClintock, Martha K; Waite, Linda J; Shega, Joseph W; Huisingh-Scheetz, Megan J; Dale, William

    2015-01-01

    Most measures of cognitive function used in large-scale surveys of older adults have limited ability to detect subtle differences across cognitive domains, and standard clinical instruments are impractical to administer in general surveys. The Montreal Cognitive Assessment (MoCA) can address this need, but has limitations in a survey context. Therefore, we developed a survey adaptation of the MoCA, called the MoCA-SA, and describe its psychometric properties in a large national survey. Using a pretest sample of older adults (n=120), we reduced MoCA administration time by 26%, developed a model to accurately estimate full MoCA scores from the MoCA-SA, and tested the model in an independent clinical sample (n=93). The validated 18-item MoCA-SA was then administered to community-dwelling adults aged 62 to 91 as part of the National Social life Health and Aging Project Wave 2 sample (n=3196). In National Social life Health and Aging Project Wave 2, the MoCA-SA had good internal reliability (Cronbach α=0.76). Using item-response models, survey-adapted items captured a broad range of cognitive abilities and functioned similarly across sex, education, and ethnic groups. Results demonstrate that the MoCA-SA can be administered reliably in a survey setting while preserving sensitivity to a broad range of cognitive abilities and similar performance across demographic subgroups.

  4. Designing new guides and instruments using McStas

    CERN Document Server

    Farhi, E; Wildes, A R; Ghosh, R; Lefmann, K

    2002-01-01

    With the increasing complexity of modern neutron-scattering instruments, the need for powerful tools to optimize their geometry and physical performances (flux, resolution, divergence, etc.) has become essential. As the usual analytical methods reach their limit of validity in the description of fine effects, the use of Monte Carlo simulations, which can handle these latter, has become widespread. The McStas program was developed at Riso National Laboratory in order to provide neutron scattering instrument scientists with an efficient and flexible tool for building Monte Carlo simulations of guides, neutron optics and instruments. To date, the McStas package has been extensively used at the Institut Laue-Langevin, Grenoble, France, for various studies including cold and thermal guides with ballistic geometry, diffractometers, triple-axis, backscattering and time-of-flight spectrometers. In this paper, we present some simulation results concerning different guide geometries that may be used in the future at th...

  5. Southeast Region Headboat Survey-PPS Survey Design Project

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset is a record of trips selected during pilot procedures for the PPS design project designed to track the port agents ability to follow the PPS design and...

  6. Preliminary Design and Analysis of the GIFTS Instrument Pointing System

    Science.gov (United States)

    Zomkowski, Paul P.

    2003-01-01

    The Geosynchronous Imaging Fourier Transform Spectrometer (GIFTS) Instrument is the next generation spectrometer for remote sensing weather satellites. The GIFTS instrument will be used to perform scans of the Earth s atmosphere by assembling a series of field-of- views (FOV) into a larger pattern. Realization of this process is achieved by step scanning the instrument FOV in a contiguous fashion across any desired portion of the visible Earth. A 2.3 arc second pointing stability, with respect to the scanning instrument, must be maintained for the duration of the FOV scan. A star tracker producing attitude data at 100 Hz rate will be used by the autonomous pointing algorithm to precisely track target FOV s on the surface of the Earth. The main objective is to validate the pointing algorithm in the presence of spacecraft disturbances and determine acceptable disturbance limits from expected noise sources. Proof of concept validation of the pointing system algorithm is carried out with a full system simulation developed using Matlab Simulink. Models for the following components function within the full system simulation: inertial reference unit (IRU), attitude control system (ACS), reaction wheels, star tracker, and mirror controller. With the spacecraft orbital position and attitude maintained to within specified limits the pointing algorithm receives quaternion, ephemeris, and initialization data that are used to construct the required mirror pointing commands at a 100 Hz rate. This comprehensive simulation will also aid in obtaining a thorough understanding of spacecraft disturbances and other sources of pointing system errors. Parameter sensitivity studies and disturbance analysis will be used to obtain limits of operability for the GIFTS instrument. The culmination of this simulation development and analysis will be used to validate the specified performance requirements outlined for this instrument.

  7. Design and Feasibility of PASSIST: A Passive Instrument Positioner

    NARCIS (Netherlands)

    Jaspers, J.E.N.; Den Boer, K.T.; Sjoerdsma, W.; Bruijn, M.; Grimbergen, C.A.

    2000-01-01

    Background and Purpose: During minimally invasive procedures, an assistant controls the camera and often a laparoscopic grasper. Ideally, the surgeon should be able to manipulate the instruments because the indirect way of control complicates the surgeon's observation and actions and disturbs eye-ha

  8. SHIM-Free Breadboard Instrument Design, Integration, and First Measurements

    Science.gov (United States)

    2005-11-23

    The concept is similar to a Michelson interferometer with the return mirrors replaced by fixed, tilted diffraction gratings. Figure 1 shows the basic...Cardon, R.R. Conway, C.M. Brown, J. Wimperis, "Robust monolithic ultraviolet interferometer for the SHIMMER instrument on STPSat-l," Applied Optics, 42

  9. Designing new guides and instruments using McStas

    DEFF Research Database (Denmark)

    Farhi, E.; Hansen, T.; Wildes, A.

    2002-01-01

    of guides, neutron optics and instruments [1]. To date, the McStas package has been extensively used at the Institut Laue-Langevin, Grenoble, France, for various studies including cold and thermal guides with ballistic geometry, diffractometers, triple-axis, backscattering and time-of-flight spectrometers...

  10. Optical flows method for lightweight agile remote sensor design and instrumentation

    Science.gov (United States)

    Wang, Chong; Xing, Fei; Wang, Hongjian; You, Zheng

    2013-08-01

    Lightweight agile remote sensors have become one type of the most important payloads and were widely utilized in space reconnaissance and resource survey. These imaging sensors are designed to obtain the high spatial, temporary and spectral resolution imageries. Key techniques in instrumentation include flexible maneuvering, advanced imaging control algorithms and integrative measuring techniques, which are closely correlative or even acting as the bottle-necks for each other. Therefore, mutual restrictive problems must be solved and optimized. Optical flow is the critical model which to be fully represented in the information transferring as well as radiation energy flowing in dynamic imaging. For agile sensors, especially with wide-field-of view, imaging optical flows may distort and deviate seriously when they perform large angle attitude maneuvering imaging. The phenomena are mainly attributed to the geometrical characteristics of the three-dimensional earth surface as well as the coupled effects due to the complicated relative motion between the sensor and scene. Under this circumstance, velocity fields distribute nonlinearly, the imageries may badly be smeared or probably the geometrical structures are changed since the image velocity matching errors are not having been eliminated perfectly. In this paper, precise imaging optical flow model is established for agile remote sensors, for which optical flows evolving is factorized by two forms, which respectively due to translational movement and image shape changing. Moreover, base on that, agile remote sensors instrumentation was investigated. The main techniques which concern optical flow modeling include integrative design with lightweight star sensors along with micro inertial measurement units and corresponding data fusion, the assemblies of focal plane layout and control, imageries post processing for agile remote sensors etc. Some experiments show that the optical analyzing method is effective to

  11. Instrumentation

    CERN Document Server

    Engelfried, J

    2006-01-01

    In this course, given at the school in 3 parts of 75 minutes each, we will discuss the physics of particle detection, the basic designs and working principles of detectors, and, as an example with more details, some detectors for particle identification.

  12. Development of a New Approach to Instrument Model Design Used by Team X

    Science.gov (United States)

    Andrew, Shanna E.

    2005-01-01

    The Jet Propulsion Laboratory's Advanced Design Team was formed in April 1995 to improve the quality and reduce the cost of JPL proposals and advanced mission studies. Currently a consolidation attempt is underway to develop a Model Library for use by JPL's Advanced Projects Design Team by collecting existing instrument models for inclusion in the library. This will allow users to readily find models of interest. In addition to this, there is also an attempt underway to develop a new approach to instrument model design used by the Advanced Design Team (Team X). This new approach consists of splitting up the different model parts such as orbital parameters, instrument parameters and instrument outputs into separate searchable parts. The user can then decide between design trades and use the different pieces to construct a model that will fit their needs. As well, this will lead to the opportunity for the large variety of usable instrument models.

  13. Cost-effective design of economic instruments in nutrition policy

    DEFF Research Database (Denmark)

    Jensen, Jørgen Dejgård; Smed, Sinne

    2007-01-01

    This paper addresses the potential for using economic regulation, e.g. taxes or subsidies, as instruments to combat the increasing problems of inappropriate diets, leading to health problems such as obesity, diabetes 2, cardiovascular diseases etc. in most countries. Such policy measures may....... The analyses demonstrate that the average cost-effectiveness with regard to changing the intake of selected nutritional variables can be improved by 10–30 per cent if taxes/subsidies are targeted against these nutrients, compared with targeting selected food categories. Finally, the paper raises a range...... of issues, which need to be investigated further, before firm conclusions about the suitability of economic instruments in nutrition policy can be drawn....

  14. A New Instrument Design for Imaging Low Energy Neutral Atoms

    Science.gov (United States)

    Keller, John W.; Collier, Michael R.; Chornay, Dennis; Rozmarynowski, Paul; Getty, Stephanie; Cooper, John F.; Smith, Billy

    2007-01-01

    The MidSTAR-2 satellite, to be built at the US Naval Academy as a follow-on to the successful MidSTAR-1 satellite (http://web.ew.usna.edu/midstar/), will launch in 2011 and carry three Goddard Space Flight Center (GSFC) experiments developed under Goddard's Internal Research and Development (IRAD) program. One of these GSFC instruments, the Miniature Imager for Neutral Ionospheric atoms and Magnetospheric Electrons (MINI-ME) builds on the heritage of the Goddard-developed Low-Energy Neutral Atom (LENA) imager launched on the IMAGE spacecraft in 2000. MINI-ME features a Venetian-blind conversion surface assembly that improves both light rejection and conversion efficiency in a smaller and lighter package than LENA making this an highly effective instrument for viewing solar wind charge exchange with terrestrial and planetary exospheres. We will describe the MINI-ME prototyping effort and its science targets.

  15. Designing new guides and instruments using McStas

    Energy Technology Data Exchange (ETDEWEB)

    Farhi, E.; Hansen, T.; Wildes, A.; Ghosh, R. [Institut Laue-Langevin, BP 156, 38042 Grenoble Cedex 9 (France); Lefmann, K. [Riso National Laboratory, Fredericksborgveg 399, 4000 Roskilde (Denmark)

    2002-07-01

    With the increasing complexity of modern neutron-scattering instruments, the need for powerful tools to optimize their geometry and physical performances (flux, resolution, divergence, etc.) has become essential. As the usual analytical methods reach their limit of validity in the description of fine effects, the use of Monte Carlo simulations, which can handle these latter, has become widespread. The McStas program was developed at Riso National Laboratory in order to provide neutron scattering instrument scientists with an efficient and flexible tool for building Monte Carlo simulations of guides, neutron optics and instruments. To date, the McStas package has been extensively used at the Institut Laue-Langevin, Grenoble, France, for various studies including cold and thermal guides with ballistic geometry, diffractometers, triple-axis, backscattering and time-of-flight spectrometers. In this paper, we present some simulation results concerning different guide geometries that may be used in the future at the Institut Laue-Langevin. Gain factors ranging from two to five may be obtained for the integrated intensities, depending on the exact geometry, the guide coatings and the source. (orig.)

  16. Designing new guides and instruments using McStas

    Science.gov (United States)

    Farhi, E.; Hansen, T.; Wildes, A.; Ghosh, R.; Lefmann, K.

    With the increasing complexity of modern neutron-scattering instruments, the need for powerful tools to optimize their geometry and physical performances (flux, resolution, divergence, etc.) has become essential. As the usual analytical methods reach their limit of validity in the description of fine effects, the use of Monte Carlo simulations, which can handle these latter, has become widespread. The McStas program was developed at Riso National Laboratory in order to provide neutron scattering instrument scientists with an efficient and flexible tool for building Monte Carlo simulations of guides, neutron optics and instruments [1]. To date, the McStas package has been extensively used at the Institut Laue-Langevin, Grenoble, France, for various studies including cold and thermal guides with ballistic geometry, diffractometers, triple-axis, backscattering and time-of-flight spectrometers [2]. In this paper, we present some simulation results concerning different guide geometries that may be used in the future at the Institut Laue-Langevin. Gain factors ranging from two to five may be obtained for the integrated intensities, depending on the exact geometry, the guide coatings and the source.

  17. Multi-beam Lidar Instrument Design, Measurement Capabilities, and Technical Readiness

    Science.gov (United States)

    Blair, B.; Ranson, J.; Dubayah, R.; Coyle, B.; Salerno, C.

    2007-12-01

    A multi-beam Laser Altimeter has been designed and studied at NASA Goddard Space Flight Center and the critical technologies have developed and tested resulting in a mature and technically ready instrument approach. The instrument consists of three separate beams each providing a near-contiguous profile of 25 m diameter laser footprints. The across-track separation of the beams can be design includes a high-quality GPS receiver for providing precise orbital position information and a state-of-the-art Star Tracker and Inertial Measurement Unit to provide precise and accurate laser beam pointing knowledge. The digitizer-based ranging system will provide ranging to bare surfaces with ~3 cm range precision. The return waveforms will also provide vegetation height measurements with ~1 m of accuracy. The laser transmitters have been fully developed, characterize, and tested. Engineering Test Unit has been built at NASA/GSFC for environmental testing. Test units of the laser demonstrated 5 Billion shots without damage and diode testing indicates lifetimes of ~10 Billion shots per laser can be expected. A new waveform digitizer has been developed with improvements in sampling rate and dynamic range over the ICESat digitizer system, thus allowing higher quality waveforms to be collected, which is critical importantly for vegetation studies. This multi-beam Lidar design is the basis for the Lidar on the DESDynI (Deformation, Ecosystem Structure, and Dynamics of Ice) mission described in the NRC Decadal Survey Report that consists of a Multi-beam Lidar and an L-band InSAR to be launched in the 2010-2013 timeframe.

  18. The Application of Surveying Biochemistry Light Instrument in the Reaction System of Starch with Mn3+

    Institute of Scientific and Technical Information of China (English)

    Gu Zhengbiao; Wu Jiagen

    2000-01-01

    The possibility of the application of Surveying Biochemistry Light Instrument (SBLI) in the reaction system of starch with Mn3+was studied. The results showed: neither starch nor initiator(Mn3+) could produce light because no factor that could produce light existed in them. But starch could produce light when it was acted by Mn3 + and the intensity of light depended on the kind and concentration of starch, the amount of Mn3 +, the temperature and pH of the reaction system. In addition, the intensity of light decreased with the reaction time because of the gradual disappearance of starch free radicals.

  19. Proceedings of a workshop on methods for neutron scattering instrumentation design

    Energy Technology Data Exchange (ETDEWEB)

    Hjelm, R.P. [ed.] [Los Alamos National Lab., NM (United States)

    1997-09-01

    The future of neutron and x-ray scattering instrument development and international cooperation was the focus of the workshop. The international gathering of about 50 participants representing 15 national facilities, universities and corporations featured oral presentations, posters, discussions and demonstrations. Participants looked at a number of issues concerning neutron scattering instruments and the tools used in instrument design. Objectives included: (1) determining the needs of the neutron scattering community in instrument design computer code and information sharing to aid future instrument development, (2) providing for a means of training scientists in neutron scattering and neutron instrument techniques, and (3) facilitating the involvement of other scientists in determining the characteristics of new instruments that meet future scientific objectives, and (4) fostering international cooperation in meeting these needs. The scope of the meeting included: (1) a review of x-ray scattering instrument design tools, (2) a look at the present status of neutron scattering instrument design tools and models of neutron optical elements, and (3) discussions of the present and future needs of the neutron scattering community. Selected papers were abstracted separately for inclusion to the Energy Science and Technology Database.

  20. Optimised design of a ROTAX-type instrument

    Energy Technology Data Exchange (ETDEWEB)

    Tietze-Jaensch, H. [Rutherford Appleton Lab., Chilton (United Kingdom)]|[Institut fuer Festkoerperforschung, Juelich (Germany)

    1997-09-01

    The rotating analyser (ROTAX) spectrometer has been devised and installed at ISIS. Practical scans in (Q{h_bar}{omega}) space with a nearly arbitrary scan direction, i.e. polarisation of q vs. Q are possible and feasible with no compromises on the resolution. Valuable technological and methodological knowledge has been compiled for an improved version of such a type of instrument. At present ROTAX lacks competitiveness with other spectrometers from an unexpectedly weak neutron flux of its particular beam-line and an unfavourable adaption of the analyser`s drive power to the time frame or neutron source frequency.

  1. [Design and implementation of pulse instrument based on DSP].

    Science.gov (United States)

    Jiao, Qiyu; Pang, Chunying

    2013-03-01

    The Traditional Chinese Medical Pulse Instrument uses the HKG-07B infrared pulse sensor to get pulse signal from the body. It makes full use of the TMS320VC5402 chip to realize time-frequency domain parameters extracting, classification and identification of the pulse signal. The system can store a plenty of pulse signal and realize data communication with the PC via the USB interface. According to acquisition and classification of pulse signal experiments of 200 subjects, the results show that the recognition rate of pulse signal can reach to 87.4%. It is applicable to the clinical diagnosis and detection of the pulse signal and home healthcare.

  2. Design of a compact, low-price, lifetime measuring instrument

    Science.gov (United States)

    Draxler, Sonja; Lippitsch, Max E.; Moeller, Reinhard; Tafeit, Erwin

    1994-08-01

    The technical requirements for a small, rugged, and moderately- priced device for measuring fluorescence lifetimes have been investigated. The suitability and performance of various lifetime measuring schemes were compared. Based on these investigations a compact time-domain instrument was developed allowing measurement of fluorescence decays with a time resolution well below 1 ns. A semiconductor laser (frequency-doubled, if necessary) is used as a light source. Detection is done with a miniaturized photomultiplier. In favorable cases measurement of a fluorescent decay curve is accomplished within less than one minute.

  3. Design of a Ku band Instrumentation Synthetic Aperture Radar System

    Science.gov (United States)

    2015-10-14

    small form-factor Ku band Synthetic Aperture Radar (SAR) for use on aerial drones . Group 105 have also been using this radar as an instrumentation...frequency of the LFM chirp would be over the Nyquist frequency. To solve this problem , the bandwidth of the LFM chirp was halved to 275 MHz. The...to 40 m/s based off of the speed of a predator drone . Parameter Value Speed of Light 299720000 m/s Center Frequency 16.75 GHz Wavelength 0.0179 m

  4. Creation and Use of a Survey Instrument for Comparing Mobile Computing Devices

    Science.gov (United States)

    Macri, Jennifer M.; Lee, Paul P.; Silvey, Garry M.; Lobach, David F.

    2005-01-01

    Both personal digital assistants (PDAs) and tablet computers have emerged to facilitate data collection at the point of care. However, little research has been reported comparing these mobile computing devices in specific care settings. In this study we present an approach for comparing functionally identical applications on a Palm operating system-based PDA and a Windows-based tablet computer for point-of-care documentation of clinical observations by eye care professionals when caring for patients with diabetes. Eye-care professionals compared the devices through focus group sessions and through validated usability surveys. This poster describes the development and use of the survey instrument used for comparing mobile computing devices. PMID:16779327

  5. Tackling the Survey: A Learning-by-Induction Design

    Science.gov (United States)

    Witte, Anne E.

    2017-01-01

    Free online survey tools provide a practical learning-by-induction platform for business communication instructors interested in trying out an advanced multidisciplinary survey activity coupled with an innovative teaching design. More than just building skills in marketing, survey projects marshal a wider set of thinking and doing activities that…

  6. Design and Validation of the Quantum Mechanics Conceptual Survey

    Science.gov (United States)

    McKagan, S. B.; Perkins, K. K.; Wieman, C. E.

    2010-01-01

    The Quantum Mechanics Conceptual Survey (QMCS) is a 12-question survey of students' conceptual understanding of quantum mechanics. It is intended to be used to measure the relative effectiveness of different instructional methods in modern physics courses. In this paper, we describe the design and validation of the survey, a process that included…

  7. Design and Validation of the Quantum Mechanics Conceptual Survey

    Science.gov (United States)

    McKagan, S. B.; Perkins, K. K.; Wieman, C. E.

    2010-01-01

    The Quantum Mechanics Conceptual Survey (QMCS) is a 12-question survey of students' conceptual understanding of quantum mechanics. It is intended to be used to measure the relative effectiveness of different instructional methods in modern physics courses. In this paper, we describe the design and validation of the survey, a process that included…

  8. Design Effects and the Analysis of Survey Data.

    Science.gov (United States)

    Folsom, Ralph E.; Williams, Rick L.

    The National Assessment of Educational Progress (NAEP), like most large national surveys, employs a complex stratified multistage unequal probability sample. The design provides a rigorous justification for extending survey results to the entire U.S. target population. Developments in the analysis of data from complex surveys which provide a…

  9. Design and manufacturing of 05F-01K instrumented capsule for nuclear fuel irradiation in Hanaro

    Energy Technology Data Exchange (ETDEWEB)

    Sohn, J. M.; Shin, Y. T.; Park, S. J. (and others)

    2007-07-15

    An instrumented capsule was developed to be able to measure fuel characteristics, such as fuel temperature, internal pressure of fuel rod, fuel pellet elongation, and neutron flux, etc., during the irradiation test of nuclear fuel in Hanaro. The instrumented capsule(02F-11K) for measuring and monitoring and monitoring fuel centerline temperature and neutron flux was designed and manufactured. It was successfully irradiated in the test hole OR5 of Hanaro from March 14, 2003 to June 1, 2003 (53.84 full power days at 24 MW). In the year of 2004, 3 test fuel rods and the instrumented capsule(03F-05K) were designed and manufactured to measure fuel centerline temperature, internal pressure of fuel rod, and fuel axial deformation during irradiation test. This capsule was irradiated in the test hole OR5 of Hanaro reactor from April 26, 2004 to October 1, 2004 (59.5 EFPD at 24 {approx} 30 MW). The six typed dual instrumented fuel rods, which allow for two characteristics to be measured simultaneously in one fuel rod, have been designed and manufactured to enhance the efficiency of the irradiation test using the instrumented fuel capsule. The 05F-01K instrumented fuel capsule was designed and manufactured for a design verification test of the three dual instrumented fuel rods. The irradiation test of the 05F-01K instrumented fuel capsule will be carried out at the OR5 vertical experimental hole of Hanaro.

  10. Design of cost effective antennas for instrumentation radars

    CSIR Research Space (South Africa)

    Botha, L

    2012-09-01

    Full Text Available ] is now possible. 2.2 Mechanical design Because of the use of the reflector system on a fast accelerating positioner, this place various mechanical constraints on the reflector system. The first constraint is the allowable weight. Weight reduces... system. 2.3 Ergonometric design For the antenna to be effectively reusable, it is also important that a good ergonometric design be used. For very wide band design where feeds need to be changed, the ease of changing feeds and not losing...

  11. Backscatter LIDAR signal simulation applied to spacecraft LIDAR instrument design

    Science.gov (United States)

    Fochesatto, J.; Ristori, P.; Flamant, P.; Machado, M. E.; Singh, U.; Quel, E.

    2004-01-01

    In the framework of the scientific cooperation between the CEILAP laboratory (Argentina) and IPSL Institut Pierre Simon Laplace (France), devoted to the development of LIDAR techniques for Atmospheric sciences, a new area of scientific research, involving LIDARs, is starting in Argentine space technology. This new research area is under consideration at CEILAP in a joint effort with CONAE, the Argentine space agency, responsible for the development of future space missions. The LIDAR technique is necessary to improve our knowledge of meteorological, dynamic, and radiative processes in the South American region, for the whole troposphere and the lower stratosphere. To study this future mission, a simple model for the prediction of backscatter LIDAR signal from a spacecraft platform has been used to determine dimensions and detection characteristics of the space borne LIDAR instrument. The backscatter signal was retrieved from a modeled atmosphere considering its molecular density profile and taking into account different aerosols and clouds conditions. Signal-to-noise consideration, within the interval of possible dimension of the instrument parameters, allows us to constrain the telescope receiving area and to derive maximum range achievable, integration time and the final spatial and temporal resolutions of backscatter profiles.

  12. Design and validation of an observational instrument for technical and tactical actions in beach volleyball

    Directory of Open Access Journals (Sweden)

    José Manuel Palao

    2015-06-01

    Full Text Available Technical and tactical actions determine performance in beach volleyball. This research develops and tests an instrument to monitor and evaluate the manner of execution and efficacy of the actions in beach volleyball. The purpose of this paper was to design and validate an observational instrument to analyze technical and tactical actions in beach volleyball. The instrument collects information regarding: a information about the match (context, b information about game situations, c information about technical situations (serve, reception, set, attack, block, and court defense in relation to player execution, role, manner of execution, execution zone, and efficacy, and d information about the result of the play (win-lose and way point is obtained. Instrument design and validation was done in seven stages: a review of literature and consultation of experts; b pilot observation and data analysis; c expert review of instrument (qualitative and quantitative evaluation; d observer training test; e expert review of instrument (content validity; f measurement of the ability of the instrument to discriminate the result of the set; and g measurement of the ability of the instrument to differentiate between competition age groups. The results show that the instrument allows for obtaining objective and valid information about the players and team from offensive and defensive technical and tactical actions, as well as indirectly from physical actions. The instrument can be used, in its entirety or partially, for researching and coaching purposes.

  13. Design details of Intelligent Instruments for PLC-free Cryogenic measurements, control and data acquisition

    Science.gov (United States)

    Antony, Joby; Mathuria, D. S.; Chaudhary, Anup; Datta, T. S.; Maity, T.

    2017-02-01

    Cryogenic network for linear accelerator operations demand a large number of Cryogenic sensors, associated instruments and other control-instrumentation to measure, monitor and control different cryogenic parameters remotely. Here we describe an alternate approach of six types of newly designed integrated intelligent cryogenic instruments called device-servers which has the complete circuitry for various sensor-front-end analog instrumentation and the common digital back-end http-server built together, to make crateless PLC-free model of controls and data acquisition. These identified instruments each sensor-specific viz. LHe server, LN2 Server, Control output server, Pressure server, Vacuum server and Temperature server are completely deployed over LAN for the cryogenic operations of IUAC linac (Inter University Accelerator Centre linear Accelerator), New Delhi. This indigenous design gives certain salient features like global connectivity, low cost due to crateless model, easy signal processing due to integrated design, less cabling and device-interconnectivity etc.

  14. Visual design and verification tool for collision-free dexterous patient specific neurosurgical instruments

    Science.gov (United States)

    Hess, Maggie; Eastwood, Kyle; Linder, Bence; Bodani, Vivek; Lasso, Andras; Looi, Thomas; Fichtinger, Gabor; Drake, James

    2016-03-01

    PURPOSE: In many minimally invasive neurosurgical procedures, the surgical workspace is a small tortuous cavity that is accessed using straight, rigid instruments with limited dexterity. Specifically considering neuroendoscopy, it is often challenging for surgeons, using standard instruments, to reach multiple surgical targets from a single incision. To address this problem, continuum tools are under development to create highly dexterous minimally invasive instruments. However, this design process is not trivial, and therefore, a user-friendly design platform capable of easily incorporating surgeon input is needed. METHODS: We propose a method that uses simulation and visual verification to design continuum tools that are patient and procedure specific. Our software module utilizes pre-operative scans and virtual threedimensional (3D) patient models to intuitively aid instrument design. The user specifies basic tool parameters and the parameterized tools and trocar are modeled within the virtual patient. By selecting and dragging the instrument models, the tools are instantly reshaped and repositioned. The tool geometry and surgical entry points are then returned as outputs to undergo optimization. We have completed an initial validation of the software by comparing a simulation of a physical instrument's reachability to the corresponding virtual design. RESULTS AND CONCLUSION: The software was assessed qualitatively by two neurosurgeons, who design tools for an intraventricular endoscopic procedure. Further, validation experiments comparing the design of a virtual instrument to a physical tool demonstrate that the software module functions correctly. Thus, our platform permits user-friendly, application specific design of continuum instruments. These instruments will give surgeons much more flexibility in developing future minimally invasive procedures.

  15. Photonic lantern behaviour and implications for instrument design

    CERN Document Server

    Horton, Anthony; Ellis, Simon; Lawrence, Jon

    2014-01-01

    Photonic lanterns are an important enabling technology for astrophotonics with a wide range of potential applications including fibre Bragg grating OH suppression, integrated photonic spectrographs and fibre scramblers for high resolution spectroscopy. The behaviour of photonic lanterns differs in several important respects from the conventional fibre systems more frequently used in astronomical instruments and a detailed understanding of this behaviour is required in order to make the most effective use of this promising technology. To this end we have undertaken a laboratory study of photonic lanterns with the aim of developing an empirical model for the mapping from input to output illumination distributions. We have measured overall transmission and near field output light distributions as a function of input angle of incidence for photonic lanterns with between 19 and 61 cores. We present the results of this work, highlight the key differences between photonic lanterns and conventional fibres, and illust...

  16. Designing Chemistry Practice Exams for Enhanced Benefits: An Instrument for Comparing Performance and Mental Effort Measures

    Science.gov (United States)

    Knaus, Karen J.; Murphy, Kristen L.; Holme, Thomas A.

    2009-01-01

    The design and use of a chemistry practice exam instrument that includes a measure for student mental effort is described in this paper. Use of such an instrument can beneficial to chemistry students and chemistry educators as well as chemical education researchers from both a content and cognitive science perspective. The method for calculating…

  17. The importance of institutions in the design and implementation of economic instruments in environmental policy

    DEFF Research Database (Denmark)

    Andersen, Mikael Skou

    1995-01-01

    The role of institutions has been clearly identified as a crucial element in the design, implementation and effectiveness of economic instruments. The purpose of this paper is to help understand these interactions and identify issues which should be addressed in evaluation of policy instruments....

  18. Assessing or Reaffirming Accreditation Criteria for the Southern Association of Colleges and Schools (SACS): Development of an Alumni Survey Instrument.

    Science.gov (United States)

    Johnson, William L.; Johnson, Annabel M.

    The "Criteria for Accreditation" (1991) and reaffirmation published by the Southern Association of Colleges and Schools were validated through a survey of alumni. The criteria were developed to assist institutions in evaluating their effectiveness. In all, 2,300 survey instruments were mailed to college alumni in the United States. Of…

  19. Predicting Student Performance in Web-Based Distance Education Courses Based on Survey Instruments Measuring Personality Traits and Technical Skills

    Science.gov (United States)

    Hall, Michael

    2008-01-01

    Two common web-based surveys, "Is Online Learning Right for Me?' and "What Technical Skills Do I Need?", were combined into a single survey instrument and given to 228 on-campus and 83 distance education students. The students were enrolled in four different classes (business, computer information services, criminal justice, and…

  20. Psychometric properties of the Dutch version of the hospital-level consumer assessment of health plans survey (R) instrument

    NARCIS (Netherlands)

    O.A. Arah; A.H.A. ten Asbroek; D.M.J. Delnoij; J.S. de Koning; P.J.A. Stam; A.H. Poll; B. Vriens; P.F. Schmidt; N.S. Klazinga

    2006-01-01

    Objectives. To assess the reliability and validity of a translated version of the American Hospital-level Consumer Assessment of Health Plans Survey (R) (H-CAHPS) instrument for use in Dutch health care. Data Sources/Study Setting. Primary survey data from adults aged 18 years or more who were recen

  1. Instruments of Inquiry: Understanding the Nature and Role of Design Tools

    DEFF Research Database (Denmark)

    Dalsgaard, Peter

    2017-01-01

    Designers employ a range of tools in most design projects, yet there are few frameworks for understanding how and why they work. On the basis of a well-established school of thought, pragmatism, this paper contributes with a coherent conceptualisation of tools in design, which I label instruments...

  2. The mechanical design and dynamic testing of the IBEX-H1 electrostatic analyzer spacecraft instrument

    Energy Technology Data Exchange (ETDEWEB)

    Bernardin, John D [Los Alamos National Laboratory; Baca, Allen G [SNL

    2009-01-01

    This paper presents the mechanical design, fabrication and dynamic testing of an electrostatic analyzer spacecraft instrument. The functional and environmental requirements combined with limited spacecraft accommodations, resulted in complex component geometries, unique material selections, and difficult fabrication processes. The challenging aspects of the mechanical design and several of the more difficult production processes are discussed. In addition, the successes, failures, and lessons learned from acoustic and random vibration testing of a full-scale prototype instrument are presented.

  3. [Design and implementation of medical instrument standard information retrieval system based on APS.NET].

    Science.gov (United States)

    Yu, Kaijun

    2010-07-01

    This paper Analys the design goals of Medical Instrumentation standard information retrieval system. Based on the B /S structure,we established a medical instrumentation standard retrieval system with ASP.NET C # programming language, IIS f Web server, SQL Server 2000 database, in the. NET environment. The paper also Introduces the system structure, retrieval system modules, system development environment and detailed design of the system.

  4. Teaching Skills in Undergraduate Level Teachers: Design and Validation of an Evaluation Instrument

    OpenAIRE

    Camargo Escobar, Itala Marina; Universidad Católica de Colombia; Pardo Adames, Carlos; Universidad Católica de Colombia

    2009-01-01

    We describe the design, construction and validation processes of a instrument aimed to the evaluation of teaching skills of the Catholic University of Colombia’s undergraduate level teachers. The instrument evaluates seven skills that are basic to the exercise of teaching: curriculum planning, appropriate usage of methodological designs and organization of teaching activities, scientific technological competence, appropriate interaction with students, evaluative competence, tutorial skills...

  5. [MCU selection analysis in portable electronic medical instrument design].

    Science.gov (United States)

    Liu, Mengxing; Ye, Shuming; Xu, Zhi; Chen, Hang

    2014-05-01

    Around the features of low power and high integration of portable electronic medical equipment design, the primary low power MCU series from the current semiconductor manufacturers were compared. The analysis results showed that the 32-bit MCUs based on the low cost and high energy efficient ARM Cortex-M architectures, have comprehensive advantages on power level, operational performance and integrated peripherals obviously.

  6. Measuring determinants of career satisfaction of anesthesiologists: validation of a survey instrument.

    Science.gov (United States)

    Afonso, Anoushka M; Diaz, James H; Scher, Corey S; Beyl, Robbie A; Nair, Singh R; Kaye, Alan David

    2013-06-01

    To measure the parameter of job satisfaction among anesthesiologists. Survey instrument. Academic anesthesiology departments in the United States. 320 anesthesiologists who attended the annual meeting of the ASA in 2009 (95% response rate). The anonymous 50-item survey collected information on 26 independent demographic variables and 24 dependent ranked variables of career satisfaction among practicing anesthesiologists. Mean survey scores were calculated for each demographic variable and tested for statistically significant differences by analysis of variance. Questions within each domain that were internally consistent with each other within domains were identified by Cronbach's alpha ≥ 0.7. P-values ≤ 0.05 were considered statistically significant. Cronbach's alpha analysis showed strong internal consistency for 10 dependent outcome questions in the practice factor-related domain (α = 0.72), 6 dependent outcome questions in the peer factor-related domain (α = 0.71), and 8 dependent outcome questions in the personal factor-related domain (α = 0.81). Although age was not a variable, full-time status, early satisfaction within the first 5 years of practice, working with respected peers, and personal choice factors were all significantly associated with anesthesiologist job satisfaction. Improvements in factors related to job satisfaction among anesthesiologists may lead to higher early and current career satisfaction. Copyright © 2013 Elsevier Inc. All rights reserved.

  7. Survey Instruments for Knowledge, Skills, Attitudes and Behaviour Related to Evidence-based Practice in Occupational Therapy: A Systematic Review.

    Science.gov (United States)

    Buchanan, Helen; Siegfried, Nandi; Jelsma, Jennifer

    2016-06-01

    The purpose of this study was to evaluate, through a systematic review, assessment instruments for evidence-based practice (EBP). The specific objectives were to (1) identify survey instruments testing EBP knowledge, skills, attitudes and behaviour; (2) determine the attributes measured by each instrument; (3) evaluate the psychometric properties of the instruments; and (4) evaluate the methodological quality of the instruments. Using the Cochrane approach, searches were conducted in Pubmed, EBSCOHost and Scopus from inception to February 2014. Papers were screened by two independent assessors, and data were extracted by one researcher. Forty papers reporting 34 instruments met the inclusion criteria and were included in the qualitative synthesis. Most instruments measured EBP behaviour (n = 33) and attitudes (n = 21). This review provides a single source of information to enable researchers to select the most robust descriptive instruments to measure EBP learner attributes. Instruments used only with occupational therapists may have resulted in some instruments being missed. For further research, it is recommended that attention is given to developing objective instruments with a focus on knowledge and skills. Copyright © 2015 John Wiley & Sons, Ltd.

  8. Deriving the concentration of airborne ash with a CAS-DPOL instrument: assessing uncertainties introduced by the instrument design

    Science.gov (United States)

    Spanu, Antonio; Weinzierl, Bernadett; Freudenthaler, Volker; Sauer, Daniel; Gasteiger, Josef

    2016-04-01

    Explosive volcanic eruptions inject large amounts of gas and particles into the atmosphere resulting in strong impacts on anthropic systems and climate. Fine ash particles in suspension, even if at low concentrations, are a serious aviation safety hazard. A key point to predict the dispersion and deposition of volcanic ash is the knowledge of emitted mass and its particle size distribution. Usually the deposit is used to characterize the source but a large uncertainty is present for fine and very fine ash particles which are usually not well preserved. Conversely, satellite observations provide only column-integrated information and are strongly sensitive to cloud conditions above the ash plumes. Consequently, in situ measurements are fundamental to extend our knowledge on ash clouds, their properties, and interactions over the vertical extent of the atmosphere. Different in-situ instruments are available covering different particle size ranges using a variety of measurement techniques. Depending on the measurement technique, artefacts due to instrument setup and ambient conditions can strongly modify the measured number concentration and size distribution of the airborne particles. It is fundamental to correct for those effects to quantify the uncertainty associated with the measurement. Here we evaluate the potential of our optical light-scattering spectrometer CAS-DPOL to detect airborne mineral dust and volcanic ash (in the size range between 0.7μm and 50μm) and to provide a reliable estimation of the mass concentration, investigating the associate uncertainty. The CAS-DPOL instrument sizes particles by detecting the light scattered off the particle into a defined angle. The associated uncertainty depends on the optical instrument design and on unknown particles characteristics such as shape and material. Indirect measurements of mass concentrations are statistically reconstructed using the air flow velocity. Therefore, the detected concentration is strongly

  9. Bragg optics computer codes for neutron scattering instrument design

    Energy Technology Data Exchange (ETDEWEB)

    Popovici, M.; Yelon, W.B.; Berliner, R.R. [Missouri Univ. Research Reactor, Columbia, MO (United States); Stoica, A.D. [Institute of Physics and Technology of Materials, Bucharest (Romania)

    1997-09-01

    Computer codes for neutron crystal spectrometer design, optimization and experiment planning are described. Phase space distributions, linewidths and absolute intensities are calculated by matrix methods in an extension of the Cooper-Nathans resolution function formalism. For modeling the Bragg reflection on bent crystals the lamellar approximation is used. Optimization is done by satisfying conditions of focusing in scattering and in real space, and by numerically maximizing figures of merit. Examples for three-axis and two-axis spectrometers are given.

  10. Nanofluid enhancement of mineral oil and thermal properties instrument design

    Science.gov (United States)

    Wilborn, Eli

    There are two purposes of this research, to design and build a heat transfer cell that could accurately calculate heat transport coefficients of various fluids and to determine if the increased heat transfer capabilities of nanofluids can be applied to cooling transformers by using the heat transfer cell to measure the enhancement. The design and construction of a heat transfer cell that could accurately calculate heat transport coefficients of various fluids was successful. A heat transfer cell was built and tested on several fluids to confirm the accuracy of the design and the experiments. Three fluids were successfully tested overall for their thermal conductivity values, and one fluid was tested for its convection coefficients in the heat transfer cells. Values for the thermal conductivity and the convection coefficients were obtained during this experiment that agreed with commonly accepted values for the testing fluids. The average value for the thermal conductivities for mineral oil of the first design in the ¼" diameter cell is 0.15W/ m2c', and agrees well with the commonly accepted values of mineral oils. The value commonly accepted value of thermal conductivity for mineral oil is 0.14W/m2c' at 25°C, the first heat transfer cell yielded a thermal conductivity value of approximately 0.16W/m2 c' at roughly 25C. The heat transfer cell was also used to calculated convection coefficients of mineral oil, and values were obtained within the limits for natural convection according to Incropera, contributing more to the validity of the results from this heat transfer cell. A second heat transfer cell was designed to determine the thermal conductivities of more thermally sensitive fluids, offering a wider range of materials that can be tested. The second design places the thermocouples directly at their assumed position of the wire and the wall temperatures for calculation purposes, yielding more accurate results and can therefore more accurately calculate the

  11. Designing an Instrument to Measure the QoS of a Spanish Virtual Store

    Science.gov (United States)

    de Abajo, Beatriz Sainz; de La Torre Díez, Isabel; Salcines, Enrique García; Fernández, Javier Burón; Pernas, Francisco Díaz; Coronado, Miguel López; de Castro Lozano, Carlos

    This article describes the development of an instrument, in the form of a survey, which is distributed to users of a B2C website selling electronic books in order to ascertain their satisfaction. The opinions compiled from a pilot sample and the exploratory factor analysis carried out point to factors that best summarise the quality of the application analysed here. Analysis of the initial survey, with a total of 40 items, shaped the final instrument, encompassing 18 items divided into 6 dimensions, which measure the perceptions of users of the application in order to improve the contents of the website. Subsequently, a confirmatory factorial analysis is performed, ensuring the reliability of the study and which confirms that the structure of the instrument developed truly measures service quality in accordance with the requirements of the website in terms of offering a space that fulfils consumer expectations in the Information Society.

  12. Instrumental Genesis in GeoGebra Based Board Game Design

    DEFF Research Database (Denmark)

    Misfeldt, Morten

    2013-01-01

    In this paper I address the use of digital tools (GeoGebra) in open ended design activities, with primary school children. I present results from the research and development project “Creative Digital Mathematics”, which aims to use the pupil’s development of mathematical board games as a vehicle...... in their work with GeoGebra and how they relate their work with GeoGebra and mathematics to fellow pupils and real life situations. The results show that pupils’ consider development of board games as meaningful mathematical activity, and that they develop skills with GeoGebra, furthermore the pupils considers...

  13. Development and validation of a survey instrument for assessing prescribers' perception of computerized drug-drug interaction alerts.

    Science.gov (United States)

    Zheng, Kai; Fear, Kathleen; Chaffee, Bruce W; Zimmerman, Christopher R; Karls, Edward M; Gatwood, Justin D; Stevenson, James G; Pearlman, Mark D

    2011-12-01

    To develop a theoretically informed and empirically validated survey instrument for assessing prescribers' perception of computerized drug-drug interaction (DDI) alerts. The survey is grounded in the unified theory of acceptance and use of technology and an adapted accident causation model. Development of the instrument was also informed by a review of the extant literature on prescribers' attitude toward computerized medication safety alerts and common prescriber-provided reasons for overriding. To refine and validate the survey, we conducted a two-stage empirical validation study consisting of a pretest with a panel of domain experts followed by a field test among all eligible prescribers at our institution. The resulting survey instrument contains 28 questionnaire items assessing six theoretical dimensions: performance expectancy, effort expectancy, social influence, facilitating conditions, perceived fatigue, and perceived use behavior. Satisfactory results were obtained from the field validation; however, a few potential issues were also identified. We analyzed these issues accordingly and the results led to the final survey instrument as well as usage recommendations. High override rates of computerized medication safety alerts have been a prevalent problem. They are usually caused by, or manifested in, issues of poor end user acceptance. However, standardized research tools for assessing and understanding end users' perception are currently lacking, which inhibits knowledge accumulation and consequently forgoes improvement opportunities. The survey instrument presented in this paper may help fill this methodological gap. We developed and empirically validated a survey instrument that may be useful for future research on DDI alerts and other types of computerized medication safety alerts more generally.

  14. Variance estimation for systematic designs in spatial surveys.

    Science.gov (United States)

    Fewster, R M

    2011-12-01

    In spatial surveys for estimating the density of objects in a survey region, systematic designs will generally yield lower variance than random designs. However, estimating the systematic variance is well known to be a difficult problem. Existing methods tend to overestimate the variance, so although the variance is genuinely reduced, it is over-reported, and the gain from the more efficient design is lost. The current approaches to estimating a systematic variance for spatial surveys are to approximate the systematic design by a random design, or approximate it by a stratified design. Previous work has shown that approximation by a random design can perform very poorly, while approximation by a stratified design is an improvement but can still be severely biased in some situations. We develop a new estimator based on modeling the encounter process over space. The new "striplet" estimator has negligible bias and excellent precision in a wide range of simulation scenarios, including strip-sampling, distance-sampling, and quadrat-sampling surveys, and including populations that are highly trended or have strong aggregation of objects. We apply the new estimator to survey data for the spotted hyena (Crocuta crocuta) in the Serengeti National Park, Tanzania, and find that the reported coefficient of variation for estimated density is 20% using approximation by a random design, 17% using approximation by a stratified design, and 11% using the new striplet estimator. This large reduction in reported variance is verified by simulation. © 2011, The International Biometric Society.

  15. Design and Development of Carborne Survey Equipment

    Directory of Open Access Journals (Sweden)

    Syarbaini

    2015-08-01

    Full Text Available In most nuclear and radiological emergencies involving the release of radioactive materials to environment, it is important that data on the geographic distribution of potentially hazardous radioactive materials be quickly presented to the authorities. The mobile radiation detection system makes it possible to measure radioactive materials in the environment at random places because of its easy mobility from place to place. The purpose of the work is to develop a mobile radiation detection system to measure gamma exposure rate, radioactive material on the ground and airborne radioactive particulate in the environment quickly. In this work, we have developed a carborne survey equipment system consisting of three gamma ray detectors, one airbome radioactive particulate sampler, a GPS (Global Positioning System, meteorological sensors, a data acquisition system and an operation software. Performance of the carborne survey equipment has been successfully demonstrated to measure iodine and argon release from medical isotope production facility on Serpong in western Java, Indonesia.

  16. Measuring social exclusion in routine public health surveys: construction of a multidimensional instrument.

    Directory of Open Access Journals (Sweden)

    Addi P L van Bergen

    Full Text Available INTRODUCTION: Social exclusion is considered a major factor in the causation and maintenance of health inequalities, but its measurement in health research is still in its infancy. In the Netherlands the Institute for Social Research (SCP developed an instrument to measure the multidimensional concept of social exclusion in social and economic policy research. Here, we present a method to construct a similar measure of social exclusion using available data from public health surveys. METHODS: Analyses were performed on data from the health questionnaires that were completed by 20,877 adults in the four largest cities in the Netherlands. From each of the four questionnaires we selected the items that corresponded to those of the SCP-instrument. These were entered into a nonlinear canonical correlation analysis. The measurement properties of the resulting indices and dimension scales were assessed and compared to the SCP-instrument. RESULTS: The internal consistency of the indices and most of the dimension scales were adequate and the internal structure of the indices was as expected. Both generalisabiliy and construct validity were good: in all datasets strong associations were found between the index and a number of known risk factors of social exclusion. A limitation of content validity was that the dimension "lack of normative integration" could not be measured, because no relevant items were available. CONCLUSIONS: Our findings indicate that a measure for social exclusion can be constructed with available health questionnaires. This provides opportunities for application in public health surveillance systems in the Netherlands and elsewhere in the world.

  17. The Gaia spectrophotometric standard stars survey -II. Instrumental effects of six ground-based observing campaigns

    CERN Document Server

    Altavilla, G; Pancino, E; Galleti, S; Ragaini, S; Bellazzini, M; Cocozza, G; Bragaglia, A; Carrasco, J M; Castro, A; Di Fabrizio, L; Federici, L; Figueras, F; Gebran, M; Jordi, C; Masana, E; Schuster, W; Valentini, G; Voss, H

    2015-01-01

    The Gaia SpectroPhotometric Standard Stars (SPSS) survey started in 2006, it was awarded almost 450 observing nights, and accumulated almost 100,000 raw data frames, with both photometric and spectroscopic observations. Such large observational effort requires careful, homogeneous, and automated data reduction and quality control procedures. In this paper, we quantitatively evaluate instrumental effects that might have a significant (i.e.,$\\geq$1%) impact on the Gaia SPSS flux calibration. The measurements involve six different instruments, monitored over the eight years of observations dedicated to the Gaia flux standards campaigns: DOLORES@TNG in La Palma, EFOSC2@NTT and ROSS@REM in La Silla, CAFOS@2.2m in Calar Alto, BFOSC@Cassini in Loiano, and LaRuca@1.5m in San Pedro Martir. We examine and quantitatively evaluate the following effects: CCD linearity and shutter times, calibration frames stability, lamp flexures, second order contamination, light polarization, and fringing. We present methods to correct ...

  18. Dental Management Survey Brazil (DMS-BR): creation and validation of a management instrument

    Science.gov (United States)

    Gonzales, Paola Sampaio; Martins, Ismar Eduardo; Biazevic, Maria Gabriela Haye; Silva, Paulo Roberto da; Michel-Crosato, Edgard

    2017-04-10

    Questionnaires for the assessment of knowledge and self-perception can be useful to diagnose what a dentist knows about management and administration. The aim of the present study was to create and validate the Dental Management Survey Brazil (DMS-BR) scale, based on meetings with experts in the field. After having elaborated the first version, 10 audits were performed in dental offices in order to produce the final version, which included nine dimensions: location, patient, finance, marketing, competition, quality, staff, career, and productivity. The accuracy of the instrument was measured by intrarater and interrater reliability. In the validation phase, 247 Brazilian dentists answered a web-based questionnaire. The data were processed using Stata 13.0 and the significance level was set at 95%. The instrument had intrarater and interrater reliability (ICC-0.93 and 0.94). The overall average of respondents for the DMS-BR scale was 3.77 (SD = 0.45). Skewness and kurtosis were below absolute values 3 and 7, respectively. Internal validity measured by Cronbach's alpha was 0.925 and the correlation of each dimension with the final result of the DMS-BR ranged between 0.606 and 0.810. Correlation with the job satisfaction scale was 0.661. The SEM data ranged between 0.80 and 0.56. The questionnaire presented satisfactory indicators of dentists' self-perception about management and administration activities.

  19. Neutron detector array at IUAC: Design features and instrumentation developments

    Indian Academy of Sciences (India)

    P Sugathan; A Jhingan; K S Golda; T Varughese; S Venkataramanan; N Saneesh; V V Satyanarayana; S K Suman; J Antony; Ruby Shanti; K Singh; S K Saini; A Gupta; A Kothari; P Barua; Rajesh Kumar; J Zacharias; R P Singh; B R Behera; S K Mandal; I M Govil; R K Bhowmik

    2014-11-01

    The characteristics and performance of the newly commissioned neutron detector array at IUAC are described. The array consists of 100 BC501 liquid scintillators mounted in a semispherical geometry and are kept at a distance of 175 cm from the reaction point. Each detector is a 5″ × 5″ cylindrical cell coupled to 5″ diameter photomultiplier tube (PMT). Signal processing is realized using custom-designed home-made integrated electronic modules which perform neutron–gamma discrimination using zero cross timing and time-of-flight (TOF) technique. Compact custom-built high voltage power supply developed using DC–DC converters are used to bias the detector. The neutrons are recorded in coincidence with fission fragments which are detected using multi-wire proportional counters mounted inside a 1m diameter SS target chamber. The detectors and electronics have been tested off-line using radioactive sources and the results are presented.

  20. A novel design for steerable instruments based on laser-cut nitinol.

    Science.gov (United States)

    Dewaele, Frank; Kalmar, Alain F; De Ryck, Frederic; Lumen, Nicolaas; Williams, Leonie; Baert, Edward; Vereecke, Hugo; Kalala Okito, Jean Pierre; Mabilde, Cyriel; Blanckaert, Bart; Keereman, Vincent; Leybaert, Luc; Van Nieuwenhove, Yves; Caemaert, Jacques; Van Roost, Dirk

    2014-06-01

    Omnidirectional articulated instruments enhance dexterity. In neurosurgery, for example, the simultaneous use of 2 instruments through the same endoscopic shaft remains a difficult feat. It is, however, very challenging to manufacture steerable instruments of the requisite small diameter. We present a new technique to produce such instruments by means of laser cutting. Only 3 coaxial tubes are used. The middle tube has a cutting pattern that allows the steering forces to be transmitted from the proximal to the distal end. In this way the steering part is concealed in the wall of the tube. Large diameter articulated instruments such as for laparoscopy might benefit from the excellent tip stability provided by the same economical technology. Coaxial nitinol tubes are laser-cut with a Rofin Stent Cutter in a specific pattern. The 3 tubes are assembled by sliding them over one another, forming a single composite tube. In a surgical simulator, the neurosurgical microinstruments and laparoscopic needle drivers were evaluated on surgical convenience. Simultaneous use of 2 neurosurgical instruments (1.5 mm diameter) through the same endoscopic shaft proved to be very intuitive. The tip of the steerable laparoscopic instruments (10 mm diameter) could resist a lateral force of more than 20 N. The angle of motion for either instrument was at least 70° in any direction. A new design for steerable endoscopic instruments is presented. It allows the construction in a range from microinstruments to 10-mm laparoscopic devices with excellent tip stability. © The Author(s) 2013.

  1. The Design of AN Interactive E-Learning Platform for Surveying Exercise

    Science.gov (United States)

    Cheng, S.-C.; Shih, P. T. Y.; Chang, S.-L.; Chen, G.-Y.

    2011-09-01

    Surveying exercise is a fundamental course for Civil Engineering students. This course is featured with field operation. This study explores the design of an e-learning platform for the surveying exercise course. The issues on organizing digital contents such as recorded video of the standard instrument operation, editing learning materials, and constructing the portfolio for the learning process, as well as generating learning motivation, are discussed. Noting the uploaded videos, publishing articles and commentaries, interactive examination sessions, assessing for each other, and mobile device accessing, are found to be useful elements for this platform.

  2. The Design and Validation of the Quantum Mechanics Conceptual Survey

    OpenAIRE

    Wieman, C. E.; K. K. Perkins; McKagan, S. B.

    2010-01-01

    The Quantum Mechanics Conceptual Survey (QMCS) is a 12-question survey of students’ conceptual understanding of quantum mechanics. It is intended to be used to measure the relative effectiveness of different instructional methods in modern physics courses. In this paper, we describe the design and validation of the survey, a process that included observations of students, a review of previous literature and textbooks and syllabi, faculty and student interviews, and statistical analysis. We al...

  3. The design of an instrumented rebar for assessment of corrosion in cracked reinforced concrete

    DEFF Research Database (Denmark)

    Pease, Bradley Justin; Geiker, Mette Rica; Stang, Henrik;

    2011-01-01

    An instrumented rebar is presented which was designed to have a realistic mechanical performance and to provide location dependent measurements to assess the environment with regards to reinforcement corrosion. The instrumented rebar was constructed from a hollowed 10 mm nominal diameter standard...... between the steel and concrete. Cracked beams with cast-in instrumented and standard rebars were ponded with a 10\\% chloride solution and the open circuit corrosion potential (OCP) of the 17 sensors was measured for up to 62 days. Measurements from the individual sensors indicate when and where active...... rebar with 17 electronically isolated corrosion sensors. Instrumented and standard rebars were cast into concrete beams and bending cracks were induced and held open using steel frames. Epoxy impregnation was used to assess and compare cracks in the concrete around the instrumented and standard rebar...

  4. Ethical challenges in designing and conducting medicine quality surveys.

    Science.gov (United States)

    Tabernero, Patricia; Parker, Michael; Ravinetto, Raffaella; Phanouvong, Souly; Yeung, Shunmay; Kitutu, Freddy E; Cheah, Phaik Yeong; Mayxay, Mayfong; Guerin, Philippe J; Newton, Paul N

    2016-06-01

    In this paper we discuss the main ethical challenges related to the conduct of medicine quality surveys and make suggestions on how to address them. Most evidence-based information regarding medicine quality derives from surveys. However, existing research ethical guidelines do not provide specific guidance for medicine quality surveys. Hence, those conducting surveys are often left wondering how to judge what counts as best practice. A list of the main ethical challenges in the design and conduct of surveys is presented. It is vital that the design and conduct of medicine quality surveys uphold moral and ethical obligations and analyse the ethical implications and consequences of such work. These aspects include the impact on the local availability of and access to medicines; the confidentiality and privacy of the surveyors and the surveyed; questions as to whether outlet staff personnel should be told they are part of a survey; the need of ethical and regulatory approvals; and how the findings should be disseminated. Medicine quality surveys should ideally be conducted in partnership with the relevant national Medicine Regulatory Authorities. An international, but contextually sensitive, model of good ethical practice for such surveys is needed. © 2016 The Authors. Tropical Medicine & International Health Published by John Wiley & Sons Ltd.

  5. Design package for instrumentation of the Decade 80 House in Tucson, Arizonia

    Energy Technology Data Exchange (ETDEWEB)

    1978-07-01

    This design package covers instrumentation and system design material submitted to the George C. Marshall Space Flight Center for the Decade 80 solar house, located in Tucson, Arizona, for the purpose of gathering data to determine the solar heating and cooling system performance.

  6. Time-of-flight diffractometer with multiple pulse overlap - an example for the application of modern tools for instrument design

    Energy Technology Data Exchange (ETDEWEB)

    Stuhr, U.; Bauer, G.S.; Wagner, W. [Paul Scherrer Institut, Villigen (Switzerland)

    1997-09-01

    A Time-of-Flight Diffractometer with high pulse rates, allowing multiple frame overlap, is a completely novel design of an instrument dedicated for high resolution strain-field mapping. We elaborated a detailed concept of this instrument applying analytical calculations and Monte Carlo computer simulations. Having established the instrument concept, the computer simulations will now be extended to optimize the total performance of the instrument. To illustrate the necessity and possibilities of applying modem tools for instrument design, we describe, as an example, the different steps towards the development of the detailed design of this instrument, which we intend to build at the Swiss spallation. source SINQ in the near future.

  7. [Valuating public health in some zoos in Colombia. Phase 1: designing and validating instruments].

    Science.gov (United States)

    Agudelo-Suárez, Angela N; Villamil-Jiménez, Luis C

    2009-10-01

    Designing and validating instruments for identifying public health problems in some zoological parks in Colombia, thereby allowing them to be evaluated. Four instruments were designed and validated along with the participation of five zoos. The instruments were validated regarding appearance, content, sensitivity to change, reliability tests and determining the tools' usefulness. An evaluation scale was created which assigned a maximum of 400 points, having the following evaluation intervals: 350-400 points meant good public health management, 100-349 points for regular management and 0-99 points for deficient management. The instruments were applied to the five zoos as part of the validation, forming a base-line for future evaluation of public health in them. Four valid and useful instruments were obtained for evaluating public health in zoos in Colombia. The five zoos presented regular public health management. The base-line obtained when validating the instruments led to identifying strengths and weaknesses regarding public health management in the zoos. The instruments obtained generally and specifically evaluated public health management; they led to diagnosing, identifying, quantifying and scoring zoos in Colombia in terms of public health. The base-line provided a starting point for making comparisons and enabling future follow-up of public health in Colombian zoos.

  8. Opto-mechanical design for transmission optics in cryogenic IR instrumentation

    Science.gov (United States)

    Kroes, Gabby; Kragt, Jan, II; Navarro, Ramon; Elswijk, Eddy; Hanenburg, Hiddo

    2008-07-01

    ASTRON is involved in the development and realization of various optical astronomical instruments for ground-based as well as space telescopes, with a focus on near- and mid-infrared instrumentation. ASTRON has developed, among others, cryogenic optics for the first generation ESO VLT and VLTI instruments VISIR, MIDI and the SPIFFI 2K-camera for SINFONI. Currently under construction are MIRI for the James Webb Space Telescope and X-shooter for the second generation ESO VLT instrumentation, while the initial design of several ELT instruments has started. Mounting optics is always a compromise between firmly fixing the optics and preventing stresses within the optics. The fixing should ensure mechanical stability and thus accurate positioning in various gravity orientations, temperature ranges, during launch, transport or earthquake. On the other hand, the fixings can induce deformations and sometimes birefringence in the optics and thus cause optical errors. Even cracking or breaking of the optics is a risk, especially at the cryogenic temperatures required in instruments for infrared astronomy, where differential expansion of various materials amounts easily to several millimetres per meter. Special kinematic mounts are therefore needed to ensure both accurate positioning and low stress. Though ASTRON is involved in the full realization of instruments from initial design to commissioning, this paper concentrates on the opto-mechanical design of optics mountings, especially for large transmission optics in cryogenic circumstances. It describes the development of temperature-invariant ("a-thermal"), kinematic designs and how they are implemented in instruments such as SPIFFI and X-shooter.

  9. Comparative Study of Data Warehouse Design Approaches : A Survey

    Directory of Open Access Journals (Sweden)

    Rajni Jindal

    2012-03-01

    Full Text Available The process of developing a data warehouse starts with identifying and gathering requirements, designing the dimensional model followed by testing and maintenance. The design phase is the most important activity in the successful building of a data warehouse. In this paper, we surveyed and evaluated the literature related to the various data warehouse design approaches on the basis of design criteria and propose a generalized object oriented conceptual designframework based on UML that meets all types of user needs.

  10. Surveying clinicians by web: current issues in design and administration.

    Science.gov (United States)

    Dykema, Jennifer; Jones, Nathan R; Piché, Tara; Stevenson, John

    2013-09-01

    The versatility, speed, and reduced costs with which web surveys can be conducted with clinicians are often offset by low response rates. Drawing on best practices and general recommendations in the literature, we provide an evidence-based overview of methods for conducting online surveys with providers. We highlight important advantages and disadvantages of conducting provider surveys online and include a review of differences in response rates between web and mail surveys of clinicians. When administered online, design-based features affect rates of survey participation and data quality. We examine features likely to have an impact including sample frames, incentives, contacts (type, timing, and content), mixed-mode approaches, and questionnaire length. We make several recommendations regarding optimal web-based designs, but more empirical research is needed, particularly with regard to identifying which combinations of incentive and contact approaches yield the highest response rates and are the most cost-effective.

  11. A frailty instrument for primary care: findings from the Survey of Health, Ageing and Retirement in Europe (SHARE).

    LENUS (Irish Health Repository)

    Romero-Ortuno, Roman

    2010-01-01

    A frailty paradigm would be useful in primary care to identify older people at risk, but appropriate metrics at that level are lacking. We created and validated a simple instrument for frailty screening in Europeans aged ≥50. Our study is based on the first wave of the Survey of Health, Ageing and Retirement in Europe (SHARE, http:\\/\\/www.share-project.org), a large population-based survey conducted in 2004-2005 in twelve European countries.

  12. The GOME-2 instrument on the Metop series of satellites: instrument design, calibration, and level 1 data processing - an overview

    Science.gov (United States)

    Munro, Rosemary; Lang, Rüdiger; Klaes, Dieter; Poli, Gabriele; Retscher, Christian; Lindstrot, Rasmus; Huckle, Roger; Lacan, Antoine; Grzegorski, Michael; Holdak, Andriy; Kokhanovsky, Alexander; Livschitz, Jakob; Eisinger, Michael

    2016-03-01

    The Global Ozone Monitoring Experiment-2 (GOME-2) flies on the Metop series of satellites, the space component of the EUMETSAT Polar System. In this paper we will provide an overview of the instrument design, the on-ground calibration and characterization activities, in-flight calibration, and level 0 to 1 data processing. The current status of the level 1 data is presented and points of specific relevance to users are highlighted. Long-term level 1 data consistency is also discussed and plans for future work are outlined. The information contained in this paper summarizes a large number of technical reports and related documents containing information that is not currently available in the published literature. These reports and documents are however made available on the EUMETSAT web pages and readers requiring more details than can be provided in this overview paper will find appropriate references at relevant points in the text.

  13. A Survey on Design Pattern Recovery Techniques

    OpenAIRE

    Ghulam Rasool; Detlef Streitfdert

    2011-01-01

    The evaluation of design pattern recovery techniques and tools is significant as numbers of emergent techniques are presented and used in the past to recover patterns from source code of legacy applications. The problem of very diverse precision and recall values extracted by different pattern recovery techniques and tools on the same examined applications is not investigated thoroughly. It is very desirable to compare features of existing techniques as abundance of techniques supplemented wi...

  14. Hydroforming Process Design Using Finite Element Simulation for a Vehicle Instrument Panel Support Frame

    Institute of Scientific and Technical Information of China (English)

    FAN Li-xia; ZHENG Zai-xiang; XIN Wen-xiu

    2006-01-01

    Tubular hydroforming has attracted increased attention in the vehicle industry recently. This paper covers a complete hydroforming process design for an instrument panel frame by finite element simulation using the explicit code LS-DYNA. The manufacturing process for the instrument panel frame consists of tube pre-bending and final hydroforming. To accomplish hydroforming process design successfully, a thorough investigation of proper combination of process parameters such as internal hydraulic pressure and axial feeding is carried out by finite element simulation to predict the tube wall thickness and shape. An optimized process parameter combination is obtained and verified by the instrument panel frame hydroforming experiment. The experiment shows that designed process parameters can be used in real production through FEA simulation, but tubular thinned amplitude by FEA is less than that with the experiment.

  15. Development and pilot testing of an Internet-based survey instrument to measure the alcohol brand preferences of U.S. youth.

    Science.gov (United States)

    Siegel, Michael; DiLoreto, Joanna; Johnson, Andrea; Fortunato, Erin K; DeJong, William

    2011-04-01

    Although we know a great deal about the percentage of youth who drink alcohol, we know very little about the specific brands they choose to drink. This information gap needs to be addressed if public health officials are to develop more effective interventions. Unfortunately, there are no national youth surveys that collect data on alcohol brand consumption. In this paper, we describe the development and pilot testing of what we believe to be the first comprehensive, Internet-based youth survey of brand-specific alcohol use. We used online advertising in 3 U.S. cities to recruit a convenience sample of 241 respondents, ages 16 to 18 years. We used Craigslist, a network of online communities that features local classified advertisements, to recruit the sample. We used SurveyGizmo, an online software program for designing Internet surveys, collecting data, and performing basic analysis, to survey these respondents about their brand-specific alcohol consumption patterns. The survey instrument assessed each respondent's 30-day drinking history, including the frequency of consumption for each alcohol brand. Using Internet survey technology, we were able to collect information on 366 brands and still have respondents complete the instrument quickly and easily. The total number of brands consumed in the past 30 days ranged from 1 to 18, with a median of 4 brands. The top 5 brands consumed were beer brands, as were eleven of the top 15 brands. The remaining 4 brands in the top 15 included 3 brands of flavored alcoholic beverages and 1 brand of mixed drink. Among the top 15 alcohol brands consumed during heavy drinking episodes were 8 brands of beer, 4 brands of flavored alcoholic beverages, 2 brands of wine, and 1 brand of mixed drink. This pilot study helps establish the feasibility of including brand-specific questions on federal or other national youth alcohol surveys. Copyright © 2011 by the Research Society on Alcoholism.

  16. Design concepts for a nuclear digital instrumentation and control system platform

    Energy Technology Data Exchange (ETDEWEB)

    Ou, T. C.; Chen, C. K.; Chen, P. J.; Shyu, S. S.; Lee, C. L. [Institute of Nuclear Energy Research, Atomic Energy Council, No. 1000 Wenhua Rd., Jiaan Village, Longtan Township, Taoyuan County 32546 Taiwan (China); Hsieh, S. F., E-mail: tcou@iner.gov.t [Electronics Group, Formosa Plastics Co., 100 Sue-Guan Road, Jen-Wu Hsiang, Kaohsiung County, Taiwan (China)

    2010-10-15

    The objective of this paper is to present the development results of the nuclear instrumentation and control system in Taiwan. As the Taiwan nuclear power plants age, the need to consider upgrading of both their safety and non-safety-related instrumentation and control systems becomes more urgent. Meanwhile, the digital instrumentation and control system that is based on current fast evolving electronic and information technologies are difficult to maintain effectively. Therefore, Institute of Nuclear Energy Research was made a decision to promote the Taiwan Nuclear Instrumentation and Control System project to collaborate with domestic electronic industry to establish self-reliant capabilities on the design, manufacturing, and application of nuclear instrumentation and control systems with newer technology. In the case of safety-related applications like nuclear instrumentation and control, safety-oriented quality control is required. In order to establish a generic qualified digital platform, the world-wide licensing experience should be considered in the licensing process. This paper describes the qualification and certification tools by IEC 61508 for design and development of safety related equipment and explains the basis for many decisions made while performing the digital upgrade. (Author)

  17. Breadboard model of the SIDRA instrument designed for the measurement of charged particle fluxes in space

    Science.gov (United States)

    Prieto, M.; Dudnik, O. V.; Sanchez, S.; Kurbatov, E. V.; Timakova, T. G.; Tejedor, J. I. G.; Titov, K. G.

    2013-04-01

    This report delves into the concept of the SIDRA instrument designed for the measurement of energetic fluxes of charged particles in space. It also presents the preliminary laboratory tests results of the breadboard model electronic units. The SIDRA instrument consists of a detector head made of high purity silicon and high performance scintillation detectors, analog and digital signal processing units, and it also includes a secondary power supply module. Preliminary results of Monte Carlo instrument simulation using the CERN GEANT4 tool are presented and the measured key specifications of charge-to-voltage converters, shapers and peak detectors are discussed. Finally, the performance of the digital processing unit with its software and the parameters of the instrument breadboard model, in particular mass, dimensions and power consumption are also presented.

  18. Teachers' perception of oral health status. Design and validation of an evaluation instrument.

    Science.gov (United States)

    Bordoni, Noemi; Cadile, María del Carmen; Sotelo, Romelia; Squassi, Aldo

    2006-01-01

    The evaluation of health status is a complex process that requires the use of indicators that assess health both in terms of disease and of the impact the health-disease-care process has on the quality of life. The aim of the present study was to design and validate an instrument to evaluate teachers 'perceptions of oral health status. The sample comprised 78 teachers of 4 schools (province of Buenos Aires). DESIGN OF THE INSTRUMENT: (a) identification of the 5 categories that compose the instrument and can measure the object of study based on evidence; (b) creation of a questionnaire that contains 32 items by two researchers; (c) evaluation of the questionnaire by 5 professionals of 4 different professions to standardize criteria (Ventegodt et al, 2003) applying an ordinal scale. Items were reduced to 25 (Index of perception of oral health: IPOH). VALIDATION OF THE INSTRUMENT: the following parameters were evaluated: reliability employing the test-retest method at 30 days; internal consistency employing Cronbach's a coefficient (1951); content validity determined by two experts; construct validity employing the method of extreme groups (Student's t test). The established categories were knowledge on oral health, personal experience with oral health care, expectations regarding their students 'families, expectations regarding dentistry, satisfaction with his/her role as a teacher The instrument proved to be reliable as evidenced by a value of r = 0.80 in the test-retest method; a satisfactory intra-items consistency was evidenced by Cronbach's alpha coefficient value of 0.82. The differences between the results of the groups of teachers in the extreme groups were statistically significant (p = 2.2). The instrument designed to measure the teachers' perception of oral health status would be valid. It would be desirable to enlarge the sample and determine criterion validity by comparison with other instruments.

  19. Avionics Instrument Systems Specialist Career Ladder: AFSCs 32531, 32551, 31571, and 32591. Occupational Survey Report.

    Science.gov (United States)

    Air Force Occupational Measurement Center, Lackland AFB, TX.

    The Avionics Instrument Systems career ladder (AFSC 325X1) provides flight line and shop maintenance training on aircraft instrument systems, electromechancial instruments, components, and test equipment. Duties involve inspecting, removing, installing, repairing, operating, troubleshooting, overhauling, and modifying systems such as flight and…

  20. GASS: The Parkes Galactic All-Sky Survey. Update: improved correction for instrumental effects and new data release

    CERN Document Server

    Kalberla, Peter M W

    2015-01-01

    The Galactic All-Sky Survey is a survey of Galactic atomic hydrogen emission in the southern sky observed with the Parkes 64-m Radio Telescope. The first data release (GASS I) concerned survey goals and observing techniques, the second release (GASS II) focused on stray radiation and instrumental corrections. We seek to remove the remaining instrumental effects and present a third data release. We use the HEALPix tessellation concept to grid the data on the sphere. Individual telescope records are compared with averages on the nearest grid position for significant deviations. All averages are also decomposed into Gaussian components with the aim of segregating unacceptable solutions. Improved priors are used for an iterative baseline fitting and cleaning. In the last step we generate 3-D FITS data cubes and examine them for remaining problems. We have removed weak, but systematic baseline offsets with an improved baseline fitting algorithm. We have unraveled correlator failures that cause time dependent oscil...

  1. European cardiac resynchronization therapy survey II: rationale and design.

    Science.gov (United States)

    Dickstein, Kenneth; Normand, Camilla; Anker, Stefan D; Auricchio, Angelo; Blomström, Carina Lundqvist; Lundqvist, Carina Blomström; Bogale, Nigussie; Cleland, John; Filippatos, Gerasimos; Gasparini, Maurizio; Gitt, Anselm; Hindricks, Gerhard; Kuck, Karl-Heinz; Ponikowski, Piotr; Stellbrink, Christoph; Ruschitzka, Frank; Linde, Cecilia

    2015-01-01

    The Cardiac Resynchronization Therapy (CRT) Survey II is a 6 months snapshot survey initiated by two ESC Associations, the European Heart Rhythm Association and the Heart Failure Association, which is designed to describe clinical practice regarding implantation of CRT devices in a broad sample of hospitals in 47 ESC member countries. The large volume of clinical and demographic data collected should reflect current patient selection, implantation, and follow-up practice and provide information relevant for assessing healthcare resource utilization in connection with CRT. The findings of this survey should permit representative benchmarking both nationally and internationally across Europe.

  2. Development and measurement properties of the Orthotics and Prosthetics Users' Survey (OPUS): a comprehensive set of clinical outcome instruments.

    Science.gov (United States)

    Heinemann, A W; Bode, R K; O'Reilly, C

    2003-12-01

    The need to measure and evaluate orthotics and prosthetics (O&P) practice has received growing recognition in the past several years. Reliable and valid self-report instruments are needed that can help facilities evaluate patient outcomes. The objective of this project was to develop a set of self-report instruments that assess functional status, quality of life, and satisfaction with devices and services that can be used in an orthotics and prosthetics clinic. Selecting items from a variety of existing instruments, the authors developed and revised four instruments that differentiate patients with varying levels of lower limb function, quality of life, and satisfaction with devices and services. Evidence of construct validity is provided by hierarchies of item difficulty that are consistent with clinical experience. For example, with the lower limb function instrument, running one block was much more difficult than walking indoors. The instruments demonstrate adequate internal consistency (0.88 for lower limb function, 0.88 for quality of life, 0.74 for service satisfaction, 0.78 for device satisfaction). The next steps in their research programme are to evaluate sensitivity and construct validity. The Orthotics and Prosthetics Users' Survey (OPUS) is a promising self-report instrument which may, with further development, allow orthotic and prosthetic practitioners to evaluate the quality and effectiveness of their services as required by accreditation standards such as those of the American Board for Certification in Orthotics and Prosthetics that mandate quality assessment.

  3. The development of state/region owned goods management’s monitoring instrument design

    Directory of Open Access Journals (Sweden)

    Ikhwanto Yogy

    2017-01-01

    Full Text Available The problems in state/region owned goods in Indonesian state and local governments are suspected to occur because of weak monitoring programs, according to many studies. A tool or instrument in implementing this monitoring program is expected to address this problem. Such tool currently doesn’t exist yet. This research aims to fill that gap by developing a monitoring instrument design for state/region owned goods by using Daerah Istimewa Yogyakarta (DIY Local Government as a research context in order to take valuable inputs for the design. This research is using developmental research method. Government Regulation were used for normative reference and Friedman’s results-based accountability quadrat were used in developing good indicators for the instrument. This research is succeeded in formulating the indicators that made up the instrument. Indicators compiled are divided into compliance-based indicators and results-based indicators. Indicators are formulated based on the validation and inputs from employees of DIY’s Assets Management Agency and experts from academia. This instrument still has some limitations that need improvement through further research.

  4. Mechanical design and vibro-acoustic testing of ultrathin carbon foils for a spacecraft instrument

    Energy Technology Data Exchange (ETDEWEB)

    Bernardin, John D [Los Alamos National Laboratory; Baca, Allen G [SNL

    2009-01-01

    IBEX-Hi is an electrostatic analyzer spacecraft instrument designed to measure the energy and flux distribution of energetic neutral atoms (ENAs) emanating from the interaction zone between the Earth's solar system and the Milky Way galaxy. A key element to this electro-optic instrument is an array of fourteen carbon foils that are used to ionize the ENAs. The foils are comprised of an ultrathin (50-100 {angstrom} thick) layer of carbon suspended across the surface of an electroformed Nickel wire screen, which in turn is held taught by a metal frame holder. The electro formed orthogonal screen has square wire elements, 12.7 {micro}m thick, with a pitch of 131.1 wires/cm. Each foil holder has an open aperture approximately 5 cm by 2.5 cm. Designing and implementing foil holders with such a large surface area has not been attempted for spaceflight in the past and has proven to be extremely challenging. The delicate carbon foils are subject to fatigue failure from the large acoustic and vibration loads that they will be exposed to during launch of the spacecraft. This paper describes the evolution of the foil holder design from previous space instrument applications to a flight-like IBEX-Hi prototype. Vibro-acoustic qualification tests of the IBEX-Hi prototype instrument and the resulting failure of several foils are summarized. This is followed by a discussion of iterative foil holder design modifications and laser vibrometer modal testing to support future fatigue failure analyses, along with additional acoustic testing of the IBEX-Hi prototype instrument. The results of these design and testing activities are merged and the resulting flight-like foil holder assembly is proposed.

  5. New Instruments for Survey: on Line Softwares for 3d Recontruction from Images

    Science.gov (United States)

    Fratus de Balestrini, E.; Guerra, F.

    2011-09-01

    3d scanning technologies had a significant development and have been widely used in documentation of cultural, architectural and archeological heritages. Modern methods of three-dimensional acquiring and modeling allow to represent an object through a digital model that combines visual potentialities of images (normally used for documentation) to the accuracy of the survey, becoming at the same time support for the visualization that for metric evaluation of any artefact that have an historical or artistic interest, opening up new possibilities for cultural heritage's fruition, cataloging and study. Despite this development, because of the small catchment area and the 3D laser scanner's sophisticated technologies, the cost of these instruments is very high and beyond the reach of most operators in the field of cultural heritages. This is the reason why they have appeared low-cost technologies or even free, allowing anyone to approach the issues of acquisition and 3D modeling, providing tools that allow to create three-dimensional models in a simple and economical way. The research, conducted by the Laboratory of Photogrammetry of the University IUAV of Venice, of which we present here some results, is intended to figure out whether, with Arc3D, it is possible to obtain results that can be somehow comparable, in therms of overall quality, to those of the laser scanner, and/or whether it is possible to integrate them. They were carried out a series of tests on certain types of objects, models made with Arc3D, from raster images, were compared with those obtained using the point clouds from laser scanner. We have also analyzed the conditions for an optimal use of Arc3D: environmental conditions (lighting), acquisition tools (digital cameras) and type and size of objects. After performing the tests described above, we analyzed the patterns generated by Arc3D to check what other graphic representations can be obtained from them: orthophotos and drawings. The research

  6. NEW INSTRUMENTS FOR SURVEY: ON LINE SOFTWARES FOR 3D RECONTRUCTION FROM IMAGES

    Directory of Open Access Journals (Sweden)

    E. Fratus de Balestrini

    2012-09-01

    Full Text Available 3d scanning technologies had a significant development and have been widely used in documentation of cultural, architectural and archeological heritages. Modern methods of three-dimensional acquiring and modeling allow to represent an object through a digital model that combines visual potentialities of images (normally used for documentation to the accuracy of the survey, becoming at the same time support for the visualization that for metric evaluation of any artefact that have an historical or artistic interest, opening up new possibilities for cultural heritage's fruition, cataloging and study. Despite this development, because of the small catchment area and the 3D laser scanner's sophisticated technologies, the cost of these instruments is very high and beyond the reach of most operators in the field of cultural heritages. This is the reason why they have appeared low-cost technologies or even free, allowing anyone to approach the issues of acquisition and 3D modeling, providing tools that allow to create three-dimensional models in a simple and economical way. The research, conducted by the Laboratory of Photogrammetry of the University IUAV of Venice, of which we present here some results, is intended to figure out whether, with Arc3D, it is possible to obtain results that can be somehow comparable, in therms of overall quality, to those of the laser scanner, and/or whether it is possible to integrate them. They were carried out a series of tests on certain types of objects, models made with Arc3D, from raster images, were compared with those obtained using the point clouds from laser scanner. We have also analyzed the conditions for an optimal use of Arc3D: environmental conditions (lighting, acquisition tools (digital cameras and type and size of objects. After performing the tests described above, we analyzed the patterns generated by Arc3D to check what other graphic representations can be obtained from them: orthophotos and drawings

  7. The Laboratory Course Assessment Survey: A Tool to Measure Three Dimensions of Research-Course Design.

    Science.gov (United States)

    Corwin, Lisa A; Runyon, Christopher; Robinson, Aspen; Dolan, Erin L

    2015-01-01

    Course-based undergraduate research experiences (CUREs) are increasingly being offered as scalable ways to involve undergraduates in research. Yet few if any design features that make CUREs effective have been identified. We developed a 17-item survey instrument, the Laboratory Course Assessment Survey (LCAS), that measures students' perceptions of three design features of biology lab courses: 1) collaboration, 2) discovery and relevance, and 3) iteration. We assessed the psychometric properties of the LCAS using established methods for instrument design and validation. We also assessed the ability of the LCAS to differentiate between CUREs and traditional laboratory courses, and found that the discovery and relevance and iteration scales differentiated between these groups. Our results indicate that the LCAS is suited for characterizing and comparing undergraduate biology lab courses and should be useful for determining the relative importance of the three design features for achieving student outcomes. © 2015 L. A. Corwin et al. CBE—Life Sciences Education © 2015 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

  8. Understanding nature's particle accelerators using high energy gamma-ray survey instruments

    Science.gov (United States)

    Abeysekara, Anushka Udara

    Nature's particle accelerators, such as Pulsars, Pulsar Wind Nebulae, Active Galactic Nuclei and Supernova Remnants accelerate charged particles to very high energies that then produce high energy photons. The particle acceleration mechanisms and the high energy photon emission mechanisms are poorly understood phenomena. These mechanisms can be understood either by studying individual sources in detail or, alternatively, using the collective properties of a sample of sources. Recent development of GeV survey instruments, such as Fermi-LAT, and TeV survey instruments, such as Milagro, provides a large sample of high energy gamma-ray flux measurements from galactic and extra-galactic sources. In this thesis I provide constraints on GeV and TeV radiation mechanisms using the X-ray-TeV correlations and GeV-TeV correlations. My data sample was obtained from three targeted searches for extragalactic sources and two targeted search for galactic sources, using the existing Milagro sky maps. The first extragalactic candidate list consists of Fermi-LAT GeV extragalactic sources, and the second extragalactic candidate list consists of TeVCat extragalactic sources that have been detected by Imaging Atmospheric Cerenkov Telescopes (IACTs). In both extragalactic candidate lists Markarian 421 was the only source detected by Milagro. A comparison between the Markarian 421 time-averaged flux, measured by Milagro, and the flux measurements of transient states, measured by IACTs, is discussed. The third extragalactic candidate list is a list of potential TeV emitting BL Lac candidates that was synthesized using X-ray observations of BL Lac objects and a Synchrotron Self-Compton model. Milagro's sensitivity was not sufficient to detect any of those candidates. However, the 95% confidence flux upper limits of those sources were above the predicted flux. Therefore, these results provide evidence to conclude that the Synchrotron Self-Compton model for BL Lac objects is still a viable

  9. Study on Design of Magnetic Flux Leakage Testing Instrument for gun

    Institute of Scientific and Technical Information of China (English)

    Wang,Changlong; Jin,Yingwei; Xu,Zhangsui; Fu,Junmei

    2005-01-01

    The paper describes the magnetic Dipole model of magnetic flux leakage (MFL) based on the principle of MFL testing, proposes the effects of surface defect width and depth on MFL field, and presents the peak-peak amplitude algorithm that the features of defect signal are extracted. The peak-peak amplitude and separation, signal gradient variation are used as the distinguish criterions of defects. The principle of instrumental hardware design is also introduced. The introduced gun MFL testing instrument is successfully employed in the nondestructive evaluation of gun.

  10. "Smart regulation": Can policy instrument design solve forest policy aims of expansion and sustainability in Flanders and the Netherlands?

    NARCIS (Netherlands)

    Gossum, Van P.; Arts, B.J.M.; Verheyen, K.

    2012-01-01

    The current study investigates with a multiple case study the relation between instrument design and policy success. The conclusion is that the instrument mix matters. The Flemish interventionist approach, which focuses more on traditional instruments, was not as effective as the Dutch stimulating

  11. Designing the Instrument Crank-Coupler Mechanism of Linear Output with Least Transmission Ratio Error

    Institute of Scientific and Technical Information of China (English)

    裘建新; 赵爱华

    2004-01-01

    Movement accuracy is the key factor to be considered in designing precision instrument linkage and mini-linkage mechanisms. Although manufacturing errors, elastic deformation, kinematic pair clearance and friction factors all will have synthesis effect on the position accuracy of the mechanical system, the essential factor to guarantee the movement precision remains the kinematic dimensions.Combining the classical theory of mechanical synthesis with the modern error theory and the numerical method, the authors put forward a systematic and complete process and method of computer aided design for the instrument crankcoupler mechanism in which the follower takes the linear displacement approximately within a certain limited domain, with the design result of least transmission ratio error.

  12. Technology, design and dementia: an exploratory survey of developers.

    Science.gov (United States)

    Jiancaro, Tizneem; Jaglal, Susan B; Mihailidis, Alex

    2017-08-01

    Despite worldwide surges in dementia, we still know relatively little about the design of home technologies that support this population. The purpose of this study was to investigate design considerations from the perspective of developers. Participants, including technical and clinical specialists, were recruited internationally and answered web-based survey questions comprising Likert-type responses with text entry options. Developers were queried on 23 technology acceptance characteristics and 24 design practices. In all, forty developers completed the survey. Concerning "technology acceptance", cost, learnability, self-confidence (during use) and usability were deemed very important. Concerning "design practice", developers overwhelmingly valued user-centred design (UCD). In terms of general assistive technology (AT) models, these were largely unknown by technical specialists compared to clinical specialists. Recommendations based on this study include incorporating "self-confidence" into design protocols; examining the implications of "usability" and UCD in this context; and considering empathy-based design approaches to suit a diverse user population. Moreover, clinical specialists have much to offer development teams, particularly concerning the use of conceptual AT models. Implications of rehabilitation Stipulate precise usability criteria. Consider "learnability" and "self-confidence" as technology adoption criteria. Recognize the important theoretical role that clinical specialists can fulfil concerning the use of design schemas. Acknowledge the diversity amongst users with dementia, potentially adopting techniques, such as designing for "extraordinary users".

  13. Design Through Integration of On-Board Calibration Device with Imaging Spectroscopy Instruments

    Science.gov (United States)

    Stange, Michael

    2012-01-01

    The main purpose of the Airborne Visible and Infrared Imaging Spectroscopy (AVIRIS) project is to "identify, measure, and monitor constituents of the Earth's surface and atmosphere based on molecular absorption and particle scattering signatures." The project designs, builds, and tests various imaging spectroscopy instruments that use On-Board Calibration devices (OBC) to check the accuracy of the data collected by the spectrometers. The imaging instrument records the spectral signatures of light collected during flight. To verify the data is correct, the OBC shines light which is collected by the imaging spectrometer and compared against previous calibration data to track spectral response changes in the instrument. The spectral data has the calibration applied to it based on the readings from the OBC data in order to ensure accuracy.

  14. Design of an 8-40 GHz Antenna for the Wideband Instrument for Snow Measurements (WISM)

    Science.gov (United States)

    Durham, Timothy E.; Vanhille, Kenneth J.; Trent, Christopher; Lambert, Kevin M.; Miranda, Felix A.

    2015-01-01

    Measurement of land surface snow remains a significant challenge in the remote sensing arena. Developing the tools needed to remotely measure Snow Water Equivalent (SWE) is an important priority. The Wideband Instrument for Snow Measurements (WISM) is being developed to address this need. WISM is an airborne instrument comprised of a dual-frequency (X- and Ku-bands) Synthetic Aperture Radar (SAR) and dual-frequency (K- and Ka-bands) radiometer. A unique feature of this instrument is that all measurement bands share a common antenna aperture consisting of an array feed reflector that covers the entire bandwidth. This paper covers the design and fabrication of the wideband array feed which is based on tightly coupled dipole arrays. Implementation using a relatively new multi-layer microfabrication process results in a small, 6x6 element, dual-linear polarized array with beamformer that operates from 8 to 40 gigahertz.

  15. Application of Situation Survey Method in Industrial Design

    Institute of Scientific and Technical Information of China (English)

    倪晓琳

    2014-01-01

    in the industrial design method, basic user research methods can be divided into many forms, this paper mainly analyzes the situation of the survey method. And mainly from the four aspects of context, collaboration, explain and focus to be explained, and illustrated.

  16. Engaging Students in Survey Design and Data Collection

    Science.gov (United States)

    Sole, Marla A.

    2015-01-01

    Every day, people use data to make decisions that affect their personal and professional lives, trusting that the data are correct. Many times, however, the data are inaccurate, as a result of a flaw in the design or methodology of the survey used to collect the data. Researchers agree that only questions that are clearly worded, unambiguous, free…

  17. Design of and initial results from a highly instrumented reactor for atmospheric chemistry (HIRAC

    Directory of Open Access Journals (Sweden)

    D. R. Glowacki

    2007-07-01

    Full Text Available The design of a Highly Instrumented Reactor for Atmospheric Chemistry (HIRAC is described and initial results obtained from HIRAC are presented. The ability of HIRAC to perform in-situ laser-induced fluorescence detection of OH and HO2 radicals with the Fluorescence Assay by Gas Expansion (FAGE technique establishes it as internationally unique for a chamber of its size and pressure/temperature variable capabilities. In addition to the FAGE technique, HIRAC features a suite of analytical instrumentation, including: a multipass FTIR system; a conventional gas chromatography (GC instrument and a GC instrument for formaldehyde detection; and NO/NO2, CO, O3, and H2O vapour analysers. Ray tracing simulations and measurements of the blacklamp flux have been utilized to develop a detailed model of the radiation field within HIRAC. Comparisons between the analysers and the FTIR coupled to HIRAC have been performed, and HIRAC has also been used to investigate pressure dependent kinetics of the chlorine atom reaction with ethene and the reaction of O3 and t-2-butene. The results obtained are in good agreement with literature recommendations and Master Chemical Mechanism predictions. HIRAC thereby offers a highly instrumented platform with the potential for: (1 high precision kinetics investigations over a range of atmospheric conditions; (2 detailed mechanism development, significantly enhanced according to its capability for measuring radicals; and (3 field instrument intercomparison, calibration, development, and investigations of instrument response under a range of atmospheric conditions.

  18. Design and performance of the ASAXS instrument at the Advanced Photon Source.

    Energy Technology Data Exchange (ETDEWEB)

    Seifert, S.; Thiyagarajan, P.; Tiede, D. M.; Winans, R. E.

    1999-07-06

    The SAXS instrument on the high brilliance undulator beam line (ID-12, BESSRC-CAT) at APS has been designed to produce high-resolution scattering patterns in the millisecond time domain. This instrument is equipped with a 20 cm x 20 cm position sensitive gas detector and a 15 cm x 15 cm high-resolution position sensitive CCD mosaic detector. A photodiode detector mounted on a 3 mm diameter beam stop permits quick alignment of the instrument as well as precise measurement of the transmitted beam intensity. The ease of changing the sample to detector distance and tuning of x-ray energy enables easy access to different Q ranges. With this instrument we routinely measure data in a Q range of 0.001 to 1 {angstrom}{sup {minus}1}. The exposure time with the CCD detector varies from 0.1 second to 10 sec depending on the scattering cross-section of the samples. Techniques to interface ancillary equipment for time-resolved studies and software for faster online analysis of the data have also been developed. We have obtained excellent data on the unfolding of proteins in the millisecond time domain, ASAXS of metallic alloys by using this instrument.

  19. Conceptual designs of NDA instruments for the NRTA system at the Rokkasho Reprocessing Plant

    Energy Technology Data Exchange (ETDEWEB)

    Li, T.K.; Klosterbuer, S.F.; Menlove, H.O. [Los Alamos National Lab., NM (United States). Safeguards Science and Technology Group] [and others

    1996-09-01

    The authors are studying conceptual designs of selected nondestructive assay (NDA) instruments for the near-real-time accounting system at the rokkasho Reprocessing Plant (RRP) of Japan Nuclear Fuel Limited (JNFL). The JNFL RRP is a large-scale commercial reprocessing facility for spent fuel from boiling-water and pressurized-water reactors. The facility comprises two major components: the main process area to separate and produce purified plutonium nitrate and uranyl nitrate from irradiated reactor spent fuels, and the co-denitration process area to combine and convert the plutonium nitrate and uranyl nitrate into mixed oxide (MOX). The selected NDA instruments for conceptual design studies are the MOX-product canister counter, holdup measurement systems for calcination and reduction furnaces and for blenders in the co-denitration process, the isotope dilution gamma-ray spectrometer for the spent fuel dissolver solution, and unattended verification systems. For more effective and practical safeguards and material control and accounting at RRP, the authors are also studying the conceptual design for the UO{sub 3} large-barrel counter. This paper discusses the state-of-the-art NDA conceptual design and research and development activities for the above instruments.

  20. Design of Mechanisms for Deployable, Optical Instruments: Guidelines for Reducing Hysteresis

    Science.gov (United States)

    Lake, Mark S.; Hachkowski, M. Roman

    2000-01-01

    This paper is intended to facilitate the development of deployable, optical instruments by providing a rational approach for the design, testing, and qualification of high-precision (i.e., low-hysteresis) deployment mechanisms for these instruments. Many of the guidelines included herein come directly from the field of optomechanical engineering, and are, therefore, neither newly developed guidelines, nor are they uniquely applicable to the design of high-precision deployment mechanisms. This paper is to be regarded as a guide to design and not a set of NASA requirements, except as may be defined in formal project specifications. Furthermore, due to the rapid pace of advancement in the field of precision deployment, this paper should be regarded as a preliminary set of guidelines. However, it is expected that this paper, with revisions as experience may indicate to be desirable, might eventually form the basis for a set of uniform design requirements for high-precision deployment mechanisms on future NASA space-based science instruments.

  1. An ergonomics based design research method for the arrangement of helicopter flight instrument panels.

    Science.gov (United States)

    Alppay, Cem; Bayazit, Nigan

    2015-11-01

    In this paper, we study the arrangement of displays in flight instrument panels of multi-purpose civil helicopters following a user-centered design method based on ergonomics principles. Our methodology can also be described as a user-interface arrangement methodology based on user opinions and preferences. This study can be outlined as gathering user-centered data using two different research methods and then analyzing and integrating the collected data to come up with an optimal instrument panel design. An interview with helicopter pilots formed the first step of our research. In that interview, pilots were asked to provide a quantitative evaluation of basic interface arrangement principles. In the second phase of the research, a paper prototyping study was conducted with same pilots. The final phase of the study entailed synthesizing the findings from interviews and observational studies to formulate an optimal flight instrument arrangement methodology. The primary results that we present in our paper are the methodology that we developed and three new interface arrangement concepts, namely relationship of inseparability, integrated value and locational value. An optimum instrument panel arrangement is also proposed by the researchers. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  2. Design of a Prototype Differential Die-Away Instrument Proposed for Swedish Spent Nuclear Fuel Characterization

    Science.gov (United States)

    Martinik, Tomas; Henzl, Vladimir; Grape, Sophie; Jansson, Peter; Swinhoe, Martyn T.; Goodsell, Alison V.; Tobin, Stephen J.

    2016-06-01

    As part of the United States (US) Department of Energy's Next Generation Safeguards Initiative Spent Fuel (NGSI-SF) project, the traditional Differential Die-Away (DDA) method that was originally developed for waste drum assay has been investigated and modified to provide a novel application to characterize or verify spent nuclear fuel (SNF). Following the promising, yet largely theoretical and simulation based, research of physics aspects of the DDA technique applied to SNF assay during the early stages of the NGSI-SF project, the most recent effort has been focused on the practical aspects of developing the first fully functional and deployable DDA prototype instrument for spent fuel. As a result of the collaboration among US research institutions and Sweden, the opportunity to test the newly proposed instrument's performance with commercial grade SNF at the Swedish Interim Storage Facility (Clab) emerged. Therefore the design of this instrument prototype has to accommodate the requirements of the Swedish regulator as well as specific engineering constrains given by the unique industrial environment. Within this paper, we identify key components of the DDA based instrument and we present methodology for evaluation and the results of a selection of the most relevant design parameters in order to optimize the performance for a given application, i.e. test-deployment, including assay of 50 preselected spent nuclear fuel assemblies of both pressurized (PWR) as well as boiling (BWR) water reactor type.

  3. Testing the Solar Probe Cup, an Instrument Designed to Touch the Sun

    Science.gov (United States)

    Whittlesey, Phyllis L.; Case, Anthony W.; Kasper, Justin Christophe; Wright, Kenneth H., Jr.; Alterman, Ben; Cirtain, Jonathan W.; Bookbinder, Jay; Korreck, Kelly E.; Stevens, Michael Louis

    2014-01-01

    Solar Probe Plus will be the first, fastest, and closest mission to the sun, providing the first direct sampling of the sub-Alfvenic corona. The Solar Probe Cup (SPC) is a unique re-imagining of the traditional Faraday Cup design and materials for immersion in this high temperature environment. Sending an instrument of this type into a never-seen particle environment requires extensive characterization prior to launch to establish sufficient measurement accuracy and instrument response. To reach this end, a slew of tests for allowing SPC to see ranges of appropriate ions and electrons, as well as a facility that reproduces solar photon spectra and fluxes for this mission. Having already tested the SPC at flight like temperatures with no significant modification of the noise floor, we recently completed a round of particle testing to see if the deviations in Faraday Cup design fundamentally change the operation of the instrument. Results and implications from these tests will be presented, as well as performance comparisons to cousin instruments such as those on the WIND spacecraft.

  4. Development and Validation of an Instrument for Assessing Climate Change Knowledge and Perceptions: The Climate Stewardship Survey (CSS)

    OpenAIRE

    Scott L. WALKER; McNeal, Karen S

    2013-01-01

    The Climate Stewardship Survey (CSS) was developed to measure knowledge and perceptions of global climate change, while also considering information sources that respondents ‘trust.’ The CSS was drafted using a three-stage approach: development of salient scales, writing individual items, and field testing and analyses. Construct validity and alpha-level reliability was conducted on the 122-item test instrument to produce a refined 84-item CSS.  The field tested C...

  5. Temperature performance of portable radiation survey instruments used for environmental monitoring and clean-up activities in Fukushima

    Science.gov (United States)

    Saegusa, Jun; Yanagisawa, Kayo; Hasumi, Atsushi; Shimizu, Takenori; Uchita, Yoshiaki

    2017-08-01

    Following the Fukushima Dai-ichi Nuclear Power Plant accident in March 2011, extensive radiation monitoring and environmental clean-up activities have been conducted throughout the Fukushima region. Outside air temperatures there reach 40 °C in summer and -20 °C in winter, which are beyond the quoted operational range of many radiation survey instruments. Herein, temperature performance of four types of portable Japanese radiation survey instruments widely used in Fukushima was experimentally investigated using a temperature-controlled chamber. They included two ionization chamber type instruments, Fuji NHA1 and Aloka ICS-323C, and two NaI(Tl) scintillation type ones, Fuji NHC7 and Aloka TCS-172B. Experimental results showed significantly diverse characteristics on the temperature dependences from one type of instrument to another. For example, NHA1 overestimated the ambient dose-equivalent rate by as much as 17% at -30 °C and 10% at 40 °C, whereas the TCS-172B readings underestimated the rate by 30% at -30 °C and 7% at 40 °C.

  6. Thermal design and performance of the REgolith x-ray imaging spectrometer (REXIS) instrument

    Science.gov (United States)

    Stout, Kevin D.; Masterson, Rebecca A.

    2014-08-01

    The REgolith X-ray Imaging Spectrometer (REXIS) instrument is a student collaboration instrument on the OSIRIS-REx asteroid sample return mission scheduled for launch in September 2016. The REXIS science mission is to characterize the elemental abundances of the asteroid Bennu on a global scale and to search for regions of enhanced elemental abundance. The thermal design of the REXIS instrument is challenging due to both the science requirements and the thermal environment in which it will operate. The REXIS instrument consists of two assemblies: the spectrometer and the solar X-ray monitor (SXM). The spectrometer houses a 2x2 array of back illuminated CCDs that are protected from the radiation environment by a one-time deployable cover and a collimator assembly with coded aperture mask. Cooling the CCDs during operation is the driving thermal design challenge on the spectrometer. The CCDs operate in the vicinity of the electronics box, but a 130 °C thermal gradient is required between the two components to cool the CCDs to -60 °C in order to reduce noise and obtain science data. This large thermal gradient is achieved passively through the use of a copper thermal strap, a large radiator facing deep space, and a two-stage thermal isolation layer between the electronics box and the DAM. The SXM is mechanically mounted to the sun-facing side of the spacecraft separately from the spectrometer and characterizes the highly variable solar X-ray spectrum to properly interpret the data from the asteroid. The driving thermal design challenge on the SXM is cooling the silicon drift detector (SDD) to below -30 °C when operating. A two-stage thermoelectric cooler (TEC) is located directly beneath the detector to provide active cooling, and spacecraft MLI blankets cover all of the SXM except the detector aperture to radiatively decouple the SXM from the flight thermal environment. This paper describes the REXIS thermal system requirements, thermal design, and analyses, with

  7. Task 5c: measurement and instrumentation under subsystem design of the LLL safeguard material control program. [For fuel reprocessing plant

    Energy Technology Data Exchange (ETDEWEB)

    1976-12-31

    A product survey was conducted of all security products currently available on the market. Documentation is presented of the survey and a printout of the data is included. A general description is given of new but recommended instrumentation and security devices for application to fuel reprocessing plants. Security systems and hardware recommended for development, assembly, and testing are discussed briefly. (DLC)

  8. The Mid-Infrared Instrument for the James Webb Space Telescope, II: Design and Build

    Science.gov (United States)

    Wright, G. S.; Wright, David; Goodson, G. B.; Rieke, G. H.; Aitink-Kroes, Gabby; Amiaux, J.; Aricha-Yanguas, Ana; Azzollini, Ruymán; Banks, Kimberly; Barrado-Navascues, D.; Belenguer-Davila, T.; Bloemmart, J. A. D. L.; Bouchet, Patrice; Brandl, B. R.; Colina, L.; Detre, Örs; Diaz-Catala, Eva; Eccleston, Paul; Friedman, Scott D.; García-Marín, Macarena; Güdel, Manuel; Glasse, Alistair; Glauser, Adrian M.; Greene, T. P.; Groezinger, Uli; Grundy, Tim; Hastings, Peter; Henning, Th.; Hofferbert, Ralph; Hunter, Faye; Jessen, N. C.; Justtanont, K.; Karnik, Avinash R.; Khorrami, Mori A.; Krause, Oliver; Labiano, Alvaro; Lagage, P.-O.; Langer, Ulrich; Lemke, Dietrich; Lim, Tanya; Lorenzo-Alvarez, Jose; Mazy, Emmanuel; McGowan, Norman; Meixner, M. E.; Morris, Nigel; Morrison, Jane E.; Müller, Friedrich; rgaard-Nielson, H.-U. Nø; Olofsson, Göran; O’Sullivan, Brian; Pel, J.-W.; Penanen, Konstantin; Petach, M. B.; Pye, J. P.; Ray, T. P.; Renotte, Etienne; Renouf, Ian; Ressler, M. E.; Samara-Ratna, Piyal; Scheithauer, Silvia; Schneider, Analyn; Shaughnessy, Bryan; Stevenson, Tim; Sukhatme, Kalyani; Swinyard, Bruce; Sykes, Jon; Thatcher, John; Tikkanen, Tuomo; van Dishoeck, E. F.; Waelkens, C.; Walker, Helen; Wells, Martyn; Zhender, Alex

    2015-07-01

    The Mid-InfraRed Instrument (MIRI) on the James Webb Space Telescope (JWST) provides measurements over the wavelength range 5 to 28.5 microns. MIRI has, within a single 'package', four key scientific functions: photometric imaging, coronagraphy, single-source low-spectral resolving power (R ~ 100) spectroscopy, and medium-resolving power (R ~ 1500 to 3500) integral field spectroscopy. An associated cooler system maintains MIRI at its operating temperature of < 6.7 K. This paper describes the driving principles behind the design of MIRI, the primary design parameters, and their realization in terms of the 'as-built' instrument. It also describes the test program that led to delivery of the tested and calibrated Flight Model to NASA in 2012, and the confirmation after delivery of the key interface requirements.

  9. High intensity multi beam design of SANS instrument for Dhruva reactor

    Science.gov (United States)

    Abbas, Sohrab; Désert, S.; Aswal, V. K.

    2016-05-01

    A new and versatile design of Small Angle Neutron Scattering (SANS) instrument based on utilization of multi-beam is presented. The multi-pinholes and multi-slits as SANS collimator for medium flux Dhruva rearctor have been proposed and their designs have been validated using McStas simulations. Various instrument configurations to achieve different minimum wave vector transfers in scattering experiments are envisioned. These options enable smooth access to minimum wave vector transfers as low as ~ 6×10-4 Å-1 with a significant improvement in neutron intensity, allowing faster measurements. Such angularly well defined and intense neutron beam will allow faster SANS studies of agglomerates larger than few tens of nm.

  10. The Mid-Infrared Instrument for JWST, II: Design and Build

    CERN Document Server

    Wright, G S; Goodson, G B; Rieke, G H; Aitink-Kroes, Gabby; Amiaux, J; Aricha-Yanguas, Ana; Azzolini, Ruyman; Banks, Kimberly; Barrado-Navascues, D; Belenguer-Davila, T; Bloemmart, J A D L; Bouchet, Patrice; Brandl, B R; Colina, L; Detre, Ors; Diaz-Catala, Eva; Eccleston, Paul; Friedman, Scott D; Garcia-Marin, Macarena; Guedel, Manuel; Glasse, Alistair; Glauser, Adrian M; Greene, T P; Groezinger, Uli; Grundy, Tim; Hastings, Peter; Henning, Th; Hofferbert, Ralph; Hunter, Faye; Jessen, N C; Justtanont, K; Karnik, Avinash R; Khorrami, Mori A; Krause, Oliver; Labiano, Alvaro; Lagage, P -O; Langer, Ulrich; Lemke, Dietrich; Lim, Tanya; Lorenzo-Alvarez, Jose; Mazy, Emmanuel; McGowan, Norman; Meixner, M E; Morris, Nigel; Morrison, Jane E; Mueller, Friedrich; Norgaard-Nielson, H -U; Olofsson, Goeran; O'Sullivan, Brian; Pel, J -W; Penanen, Konstantin; Petach, M B; Pye, J P; Ray, T P; Renotte, Etienne; Renouf, Ian; Ressler, M E; Samara-Ratna, Piyal; Scheithauer, Silvia; Schneider, Analyn; Shaughnessy, Bryan; Stevenson, Tim; Sukhatme, Kalyani; Swinyard, Bruce; Sykes, Jon; Thatcher, John; Tikkanen, Tuomo; van Dishoeck, E F; Waelkens, C; Walker, Helen; Wells, Martyn; Zhender, Alex

    2015-01-01

    The Mid-InfraRed Instrument (MIRI) on the James Webb Space Telescope (JWST) provides measurements over the wavelength range 5 to 28.5 microns. MIRI has, within a single 'package', four key scientific functions: photometric imaging, coronagraphy, single-source low-spectral resolving power (R ~ 100) spectroscopy, and medium-resolving power (R ~ 1500 to 3500) integral field spectroscopy. An associated cooler system maintains MIRI at its operating temperature of < 6.7 K. This paper describes the driving principles behind the design of MIRI, the primary design parameters, and their realization in terms of the 'as-built' instrument. It also describes the test program that led to delivery of the tested and calibrated Flight Model to NASA in 2012, and the confirmation after delivery of the key interface requirements.

  11. DESIGN AND DEVELOPMENT OF THE SNS RING VACUUM INSTRUMENTATION AND CONTROL SYSTEMS.

    Energy Technology Data Exchange (ETDEWEB)

    HSEUH,H.C.; SMART,L.A.; TANG,J.Y.

    2001-06-18

    BNL is undertaking the design, construction and commissioning of the Spallation Neutron Source (SNS) accumulator ring and the beam transport lines [l]. Ultrahigh vacuum of 10{sup {minus}9} Torr is required in the accumulator ring to minimize beam-gas ionization, a contributing factor to the e-p instability observed in a few high-intensity proton storage rings. All vacuum instrumentation must be capable of local and remote operation to achieve a reliable vacuum system, especially in this extremely high intensity accelerator. The design and development of the SNS ring vacuum instrumentation and control through the Experimental Physics and Industrial Control System (EPICS) distributed real-time software tools are presented.

  12. Large Synoptic Survey Telescope: From Science Drivers To Reference Design

    Directory of Open Access Journals (Sweden)

    Ivezić, Ž.

    2008-06-01

    Full Text Available In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next-generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST. LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pach'{o}n in Northern Chile. The current baseline design, with an 8.4, m (6.5, m effective primary mirror, a 9.6 deg$^2$ field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg$^2$ with $delta<+34.5^circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\\% of the observing time will be devoted to a deep-wide-fast survey mode which will observe a 20,000 deg$^2$ region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10\\% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We

  13. Large Synoptic Survey Telescope: From Science Drivers to Reference Design

    Energy Technology Data Exchange (ETDEWEB)

    Ivezic, Z.; Axelrod, T.; Brandt, W.N.; Burke, D.L.; Claver, C.F.; Connolly, A.; Cook, K.H.; Gee, P.; Gilmore, D.K.; Jacoby, S.H.; Jones, R.L.; Kahn, S.M.; Kantor, J.P.; Krabbendam, V.; Lupton, R.H.; Monet, D.G.; Pinto, P.A.; Saha, A.; Schalk, T.L.; Schneider, D.P.; Strauss, Michael A.; /Washington U., Seattle, Astron. Dept. /LSST Corp. /Penn State U., Astron. Astrophys. /KIPAC, Menlo Park /NOAO, Tucson /LLNL, Livermore /UC, Davis /Princeton U., Astrophys. Sci. Dept. /Naval Observ., Flagstaff /Arizona U., Astron. Dept. - Steward Observ. /UC, Santa Cruz /Harvard U. /Johns Hopkins U. /Illinois U., Urbana

    2011-10-14

    In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next-generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST). LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pachon in Northern Chile. The current baseline design, with an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg{sup 2} field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg{sup 2} with {delta} < +34.5{sup o}, and will be imaged multiple times in six bands, ugrizy, covering the wavelength range 320-1050 nm. About 90% of the observing time will be devoted to a deep-wide-fast survey mode which will observe a 20,000 deg{sup 2} region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We describe how the

  14. Large Synoptic Survey Telescope: From science drivers to reference design

    Directory of Open Access Journals (Sweden)

    Ivezić Ž.

    2008-01-01

    Full Text Available In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next- generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST. LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pachon in Northern Chile. The current baseline design, with an 8.4 m (6.5 m effective primary mirror, a 9.6 deg2 field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg2 with δ < +34.5◦ , and will be imaged multiple times in six bands, ugrizy, covering the wavelength range 320-1050 nm. About 90% of the observing time will be devoted to a deep- wide-fast survey mode which will observe a 20,000 deg2 region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We describe how the LSST

  15. Designing Spatial Visualisation Tasks for Middle School Students with a 3D Modelling Software: An Instrumental Approach

    Science.gov (United States)

    Turgut, Melih; Uygan, Candas

    2015-01-01

    In this work, certain task designs to enhance middle school students' spatial visualisation ability, in the context of an instrumental approach, have been developed. 3D modelling software, SketchUp®, was used. In the design process, software tools were focused on and, thereafter, the aim was to interpret the instrumental genesis and spatial…

  16. Survey says? A primer on web-based survey design and distribution.

    Science.gov (United States)

    Oppenheimer, Adam J; Pannucci, Christopher J; Kasten, Steven J; Haase, Steven C

    2011-07-01

    The Internet has changed the way in which we gather and interpret information. Although books were once the exclusive bearers of data, knowledge is now only a keystroke away. The Internet has also facilitated the synthesis of new knowledge. Specifically, it has become a tool through which medical research is conducted. A review of the literature reveals that in the past year, over 100 medical publications have been based on Web-based survey data alone. Because of emerging Internet technologies, Web-based surveys can now be launched with little computer knowledge. They may also be self-administered, eliminating personnel requirements. Ultimately, an investigator may build, implement, and analyze survey results with speed and efficiency, obviating the need for mass mailings and data processing. All of these qualities have rendered telephone and mail-based surveys virtually obsolete. Despite these capabilities, Web-based survey techniques are not without their limitations, namely, recall and response biases. When used properly, however, Web-based surveys can greatly simplify the research process. This article discusses the implications of Web-based surveys and provides guidelines for their effective design and distribution.

  17. Nuclear Safety Functions of ITER Gas Injection System Instrumentation and Control and the Concept Design

    Science.gov (United States)

    Yang, Yu; Maruyama, S.; Fossen, A.; Villers, F.; Kiss, G.; Zhang, Bo; Li, Bo; Jiang, Tao; Huang, Xiangmei

    2016-08-01

    The ITER Gas Injection System (GIS) plays an important role on fueling, wall conditioning and distribution for plasma operation. Besides that, to support the safety function of ITER, GIS needs to implement three nuclear safety Instrumentation and Control (I&C) functions. In this paper, these three functions are introduced with the emphasis on their latest safety classifications. The nuclear I&C design concept is briefly discussed at the end.

  18. Human engineering problems in the operation of controls and the design of aircraft instruments

    Directory of Open Access Journals (Sweden)

    W.T.V. Adiseshiah

    1958-07-01

    Full Text Available "Speed and accuracy in performance are major considerations in the design of man-machine systems which involve displays for presenting information to the senses, and controls for human use. Sensory capacity, mobility and muscle strength, mental stamina, and capacity for team work are psychological factors which call for appropriate attention. In the design and selection of control devices, it is important to consider size and shape, location and action of the control devices. These should be compatible with the element to be controlled. four matters call for attention: firstly, control dimensions should take into consideration the normal hand grasp limitations of the operator. Secondly, knob of the controls should be suitably shape coded so as to forestall inadvertent operation of wrong controls. Thirdly, controls which have to be used most often should be placed within convenient reach of the operator. Fourthly, the human operator cannot be expected to perform at maximum capacity for any great length of time. Correctly positioned power controls are being increasingly used in present day aircraft. In the design of aircraft instruments and the layout of flying panels, the limitations of the human operator, emergencies which are likely to arise during flight, and imperfections in the indications of instruments need to be taken into account. The design of aircraft instruments such as the altimeter, the air speed indicator, and the artificial horizon, are being improved from time to time so as to meet the new requirements in flying. Single and multiple instrument combinations have effected a saving of time in locating parts of a total picture, e.g. the composite indication of fuel state in modern aircraft. Many unsolved problems still remain with regard to the use of certain items such as the aiming, photographic and oxygen equipments. "

  19. A Simple Instrument Designed to Provide Consistent Digital Facial Images in Dermatology

    OpenAIRE

    Balakrishnan Nirmal; Pai, Sathish B.; Handattu Sripathi

    2013-01-01

    Photography has proven to be a valuable tool in the field of dermatology. The major reason for poor photographs is the inability to produce comparable images in the subsequent follow ups. Combining digital photography with image processing software analysis brings consistency in tracking serial images. Digital photographs were taken with the aid of an instrument which we designed in our workshop to ensure that photographs were taken with identical patient positioning, camera angles and distan...

  20. Design and Testing of a Wireless Demonstrator for Large Instrumentation Systems

    OpenAIRE

    2013-01-01

    In this proceeding, we report the development of a wireless demonstrator intended to readout instrumentation systems having thousands of channels. A data acquisition system was designed and tested based on compliant implementation of 802.11n based hardware and protocols. This project is for large detectors containing photomultiplier tubes. Both free-space optical and radio frequency techniques were tested for wireless power transfer. The front-end circuitry, including a high-voltage power sup...

  1. [System design of small intellectualized ultrasound hyperthermia instrument in the LabVIEW environment].

    Science.gov (United States)

    Jiang, Feng; Bai, Jingfeng; Chen, Yazhu

    2005-08-01

    Small-scale intellectualized medical instrument has attracted great attention in the field of biomedical engineering, and LabVIEW (Laboratory Virtual Instrument Engineering Workbench) provides a convenient environment for this application due to its inherent advantages. The principle and system structure of the hyperthermia instrument are presented. Type T thermocouples are employed as thermotransducers, whose amplifier consists of two stages, providing built-in ice point compensation and thus improving work stability over temperature. Control signals produced by specially designed circuit drive the programmable counter/timer 8254 chip to generate PWM (Pulse width modulation) wave, which is used as ultrasound radiation energy control signal. Subroutine design topics such as inner-tissue real time feedback temperature control algorithm, water temperature control in the ultrasound applicator are also described. In the cancer tissue temperature control subroutine, the authors exert new improvments to PID (Proportional Integral Differential) algorithm according to the specific demands of the system and achieve strict temperature control to the target tissue region. The system design and PID algorithm improvement have experimentally proved to be reliable and excellent, meeting the requirements of the hyperthermia system.

  2. Applying Software Engineering Methodology for Designing Biomedical Software Devoted To Electronic Instrumentation

    Directory of Open Access Journals (Sweden)

    Alderico Rodrigues de Paula Junior

    2012-01-01

    Full Text Available Problem statement: Significant effort goes into the development of biomedical software, which is integrated with computers/processors, sensors and electronic instrumentation devoted to a specific application. However, the scientific work on electronic instrumentation controlled by biomedical software has not emphasized software development, instead focusing mainly on electronics engineering. The development team is rarely composed of Software Engineering (SE experts. Usually, a commercial automated tools environment is not used due to its high cost and complexity for researchers from other areas to understand. Approach: This present study reports how the SE approach was applied to design and develop biomedical software, which is part of a Computerized Electronic Instrumentation (CEI. This CEI comprises software and an electronic instrumentation based on a force sensor and electrogoniometer to monitor the hand exertion of computer user during typing task. The aim is to serve as a guideline for academic researchers who are not expert in software engineering methodology but usually develop their own software to run with their CEI. The specification of the requirements, presented as use case, includes the context diagram, the data flow diagram, the entity relationship diagram and test procedure. The Unified Modelling Language from the Enterprise Architect tool was used. The developed software and the electronic instrumentation were tested together. Results: A sample of the interface screen shows how the outcomes could be plotted in an integrated manner. By comparing the values with other values obtained by manual calculations and with those provided by sensor manufacturer, the repeatability of test procedure validated the results. Reliable electronic instrumentation when working with unreliable software can become unreliable. Conclusion: Applying software engineering methodology principles provided a simple and clear documentation that was helpful

  3. China Oil & Gas Pipeline Survey & Design Institute, Pipeline

    Institute of Scientific and Technical Information of China (English)

    Bureau of CNPC; Zhao Surong

    1995-01-01

    @@ China Oil/Gas Pipeline Bureau(P.B) is the only professional organization in China specialized in oil/gas pipelines design and construction since 1980s. It has ever cooperated with certain number of well known companies from Japan,USA, Germany, Canada, as well as Italy in the designs of many large oil/gas pipeline projects, during the course of which, personnel from P.B accumulated much experience in international project designs. During the execution of each particular project, they strictly followed the common-use international codes and standards with computers as the auxiliary design system combined with the self-developed software. All its clients showed their trust in this organization and gave it high praise for its outstanding survey, design and technical service.

  4. A conceptual framework for designing micro electrical connectors for hearing aid instruments

    DEFF Research Database (Denmark)

    Doagou Rad, Saeed; Islam, Aminul; Fuglsang-Philip, M.

    2016-01-01

    computer simulations and experiments on the 3-D printed prototypes. In fact, the presented designs not only are able to provide a range of functions for other similar micro products, but also depict an outline for the challenges in this area and the possible approach and solutions in the design of micro......Electrical connectors play vital roles in modern electronic instruments. Hearing aid devices as advanced combinations of micro mechanics and electronics comprise various electrical connectors for different purposes. However, the current trend in the miniaturization along with the sharp...

  5. The Design and Validation of the Quantum Mechanics Conceptual Survey

    CERN Document Server

    McKagan, S B; Wieman, C E

    2010-01-01

    The Quantum Mechanics Conceptual Survey (QMCS) is a 12-question survey of students' conceptual understanding of quantum mechanics. It is intended to be used to measure the relative effectiveness of different instructional methods in modern physics courses. In this paper we describe the design and validation of the survey, a process that included observations of students, a review of previous literature and textbooks and syllabi, faculty and student interviews, and statistical analysis. We also discuss issues in the development of specific questions, which may be useful both for instructors who wish to use the QMCS in their classes and for researchers who wish to conduct further research of student understanding of quantum mechanics. The QMCS has been most thoroughly tested in, and is most appropriate for assessment of (as a posttest only), sophomore-level modern physics courses. We also describe testing with students in junior quantum courses and graduate quantum courses, from which we conclude that the QMCS ...

  6. Program Evaluation Using the Project Dakota Parent Satisfaction Survey. A Manual for Administration and Interpretation of Findings Using a Validated Instrument.

    Science.gov (United States)

    Kovach, JoAnne; Jacks, Robert

    This manual presents an instrument (the Dakota Parent Satisfaction Survey) and procedures for evaluating parent satisfaction with early intervention programs. The survey procedures have been used to evaluate seven early intervention programs each year since 1985. Development of the Survey is discussed, including the identification of program…

  7. Training Early Career Scientists in Flight Instrument Design Through Experiential Learning: NASA Goddard's Planetary Science Winter School.

    Science.gov (United States)

    Bleacher, L. V.; Lakew, B.; Bracken, J.; Brown, T.; Rivera, R.

    2017-01-01

    The NASA Goddard Planetary Science Winter School (PSWS) is a Goddard Space Flight Center-sponsored training program, managed by Goddard's Solar System Exploration Division (SSED), for Goddard-based postdoctoral fellows and early career planetary scientists. Currently in its third year, the PSWS is an experiential training program for scientists interested in participating on future planetary science instrument teams. Inspired by the NASA Planetary Science Summer School, Goddard's PSWS is unique in that participants learn the flight instrument lifecycle by designing a planetary flight instrument under actual consideration by Goddard for proposal and development. They work alongside the instrument Principal Investigator (PI) and engineers in Goddard's Instrument Design Laboratory (IDL; idc.nasa.gov), to develop a science traceability matrix and design the instrument, culminating in a conceptual design and presentation to the PI, the IDL team and Goddard management. By shadowing and working alongside IDL discipline engineers, participants experience firsthand the science and cost constraints, trade-offs, and teamwork that are required for optimal instrument design. Each PSWS is collaboratively designed with representatives from SSED, IDL, and the instrument PI, to ensure value added for all stakeholders. The pilot PSWS was held in early 2015, with a second implementation in early 2016. Feedback from past participants was used to design the 2017 PSWS, which is underway as of the writing of this abstract.

  8. Prospect for UV observations from the Moon. II. Instrumental Design of an Ultraviolet Imager LUCI

    CERN Document Server

    Mathew, Joice; Sarpotdar, Mayuresh; Sreejith, A G; K., Nirmal; Ambily, S; Safonova, Margarita; Murthy, Jayant; Brosch, Noah

    2016-01-01

    We present a design for a near-ultraviolet (NUV) imaging instrument which may be flown on a range of available platforms, including high-altitude balloons, nanosatellites, or space missions. Although all current UV space missions adopt a Ritchey-Chretain telescope design, this requires aspheric optics, making the optical system complex, expensive and challenging for manufacturing and alignment. An all-spherical configuration is a cost-effective and simple solution. We have aimed for a small payload which may be launched by different platforms and we have designed a compact, light-weight payload which will withstand all launch loads. No other UV payloads have been previously reported with an all-spherical optical design for imaging in the NUV domain and a weight below 2 kg. Our main science goal is focussed on bright UV sources not accessible by the more sensitive large space UV missions. Here we discuss various aspects of design and development of the complete instrument, the structural and finite-element ana...

  9. Design, performance, and early results from extremely high Doppler precision instruments in a global network

    Science.gov (United States)

    Ge, Jian; Zhao, Bo; Groot, John; Chang, Liang; Varosi, Frank; Wan, Xiaoke; Powell, Scott; Jiang, Peng; Hanna, Kevin; Wang, Ji; Pais, Rohan; Liu, Jian; Dou, Liming; Schofield, Sidney; McDowell, Shaun; Costello, Erin; Delgado-Navarro, Adriana; Fleming, Scott; Lee, Brian; Bollampally, Sandeep R.; Bosman, Troy; Jakeman, Hali; Fletcher, Adam; Marquez, Gabriel

    2010-07-01

    We report design, performance and early results from two of the Extremely High Precision Extrasolar Planet Tracker Instruments (EXPERT) as part of a global network for hunting for low mass planets in the next decade. EXPERT is a combination of a thermally compensated monolithic Michelson interferometer and a cross-dispersed echelle spectrograph for extremely high precision Doppler measurements for nearby bright stars (e.g., 1m/s for a V=8 solar type star in 15 min exposure). It has R=18,000 with a 72 micron slit and a simultaneous coverage of 390-694 nm. The commissioning results show that the instrument has already produced a Doppler precision of about 1 m/s for a solar type star with S/N~100 per pixel. The instrument has reached ~4 mK (P-V) temperature stability, ~1 mpsi pressure stability over a week and a total instrument throughput of ~30% at 550 nm from the fiber input to the detector. EXPERT also has a direct cross-dispersed echelle spectroscopy mode fed with 50 micron fibers. It has spectral resolution of R=27,000 and a simultaneous wavelength coverage of 390-1000 nm.

  10. Assessing usual dietary intake in complex sample design surveys: the National Dietary Survey

    Directory of Open Access Journals (Sweden)

    Flávia dos Santos Barbosa

    2013-02-01

    Full Text Available The National Cancer Institute (NCI method allows the distributions of usual intake of nutrients and foods to be estimated. This method can be used in complex surveys. However, the user must perform additional calculations, such as balanced repeated replication (BRR, in order to obtain standard errors and confidence intervals for the percentiles and mean from the distribution of usual intake. The objective is to highlight adaptations of the NCI method using data from the National Dietary Survey. The application of the NCI method was exemplified analyzing the total energy (kcal and fruit (g intake, comparing estimations of mean and standard deviation that were based on the complex design of the Brazilian survey with those assuming simple random sample. Although means point estimates were similar, estimates of standard error using the complex design increased by up to 60% compared to simple random sample. Thus, for valid estimates of food and energy intake for the population, all of the sampling characteristics of the surveys should be taken into account because when these characteristics are neglected, statistical analysis may produce underestimated standard errors that would compromise the results and the conclusions of the survey.

  11. Nutrition knowledge and Mediterranean diet adherence in the southeast United States: Validation of a field-based survey instrument.

    Science.gov (United States)

    Bottcher, Mary Rose; Marincic, Patricia Z; Nahay, Katie L; Baerlocher, Brittany E; Willis, Amy W; Park, Jieun; Gaillard, Philippe; Greene, Michael W

    2017-04-01

    The Mediterranean diet (MD) can reduce chronic disease risk and is a recommended diet for prevention and management of diabetes. Adherence to the MD in the southeast United States where obesity and diabetes are highly prevalent is unknown. The purpose of the present study was to: 1) construct a survey instrument relevant to the general population integrating both MD related nutrition knowledge and adherence questions from previously validated instruments, and 2) assess MD related nutrition knowledge and adherence in a sample population in the southest United States. Adherance was assessed using the validated short MD Adherence Screener (MEDAS). A MD nutrition knowledge (MDNK) questionnaire was developed from previously validated general nutrition knowledge questionnaires and was validated using 127 university students enrolled in three courses with varying levels of nutrition education. Cronbach's α for internal validity of MDNK was acceptable for a short questionnaire (0.653). Test-retest reliability was established (r = 0.853). Field validation of the three-part survey instrument (MEDAS, MDNK and demographic questions) was subsequently performed in 230 adults shopping at supermarkets and farmers markets in eastern Alabama. Total MDNK and MEDAS scores were significantly higher in students with formal nutrition education and in patrons of farmers markets. Greater MD adherence, assessed by dividing MEDAS scores into thirds, was found with increasing formal nutrition education in university students (p = 0.002) and in farmers market participants (p < 0.001). There was a weak but significant association between MDNK and MEDAS scores within university students and participants in the field. Together, the MDNK-MEDAS survey instrument is an effective tool for assessing baseline knowledge and adherence and can be used to target nutritional interventions to improve MD adherence for prevention and management of diabetes and other chronic disease.

  12. Measuring children's self-reported sport participation, risk perception and injury history: development and validation of a survey instrument.

    Science.gov (United States)

    Siesmaa, Emma J; Blitvich, Jennifer D; White, Peta E; Finch, Caroline F

    2011-01-01

    Despite the health benefits associated with children's sport participation, the occurrence of injury in this context is common. The extent to which sport injuries impact children's ongoing involvement in sport is largely unknown. Surveys have been shown to be useful for collecting children's injury and sport participation data; however, there are currently no published instruments which investigate the impact of injury on children's sport participation. This study describes the processes undertaken to assess the validity of two survey instruments for collecting self-reported information about child cricket and netball related participation, injury history and injury risk perceptions, as well as the reliability of the cricket-specific version. Face and content validity were assessed through expert feedback from primary and secondary level teachers and from representatives of peak sporting bodies for cricket and netball. Test-retest reliability was measured using a sample of 59 child cricketers who completed the survey on two occasions, 3-4 weeks apart. Based on expert feedback relating to face and content validity, modification and/or deletion of some survey items was undertaken. Survey items with low test-retest reliability (κ≤0.40) were modified or deleted, items with moderate reliability (κ=0.41-0.60) were modified slightly and items with higher reliability (κ≥0.61) were retained, with some undergoing minor modifications. This is the first survey of its kind which has been successfully administered to cricketers aged 10-16 years to collect information about injury risk perceptions and intentions for continued sport participation. Implications for its generalisation to other child sport participants are discussed.

  13. Prospect for UV observations from the Moon. II. Instrumental design of an ultraviolet imager LUCI

    Science.gov (United States)

    Mathew, Joice; Prakash, Ajin; Sarpotdar, Mayuresh; Sreejith, A. G.; Nirmal, K.; Ambily, S.; Safonova, Margarita; Murthy, Jayant; Brosch, Noah

    2017-02-01

    We present a design for a near-ultraviolet (NUV) imaging instrument which may be flown on a range of available platforms, including high-altitude balloons, nanosatellites, or space missions. Although all current UV space missions adopt a Ritchey-Chrétien telescope design, this requires aspheric optics, making the optical system complex, expensive and challenging for manufacturing and alignment. An all-spherical configuration is a cost-effective and simple solution. We have aimed for a small payload which may be launched by different platforms and we have designed a compact, light-weight payload which will withstand all launch loads. No other UV payloads have been previously reported with an all-spherical optical design for imaging in the NUV domain and a weight below 2 kg. Our main science goal is focused on bright UV sources not accessible by the more sensitive large space UV missions.

  14. The results of the critical design of the mission instruments of GOSAT-2

    Science.gov (United States)

    Yajima, Yukie; Suto, Hiroshi; Yotsumoto, Kazuhiko; Miyakawa, Takehiro; Hashimoto, Makiko; Shiomi, Kei; Nakajima, Masakatsu; Hirabayashi, Takeshi

    2016-04-01

    The GOSAT-2 is the successor satellite to the GOSAT which is the satellite dedicated to the measurements of the greenhouse gases such as carbon dioxide and methane. GOSAT was launched in January of 2009 and has been operated for about seven years. The development of the GOSAT-2 has been continued for two years, and through the preliminary and critical design phase the detail of the design of the mission instruments were fixed as well as the bus system design. The mission instruments of the GOSAT-2 are TANSO-FTS-2 and TANSO-CAI-2. TANSO-FTS-2 is the Fourier Transform Spectrometer observing greenhouse gases such as Carbon Dioxide and Methane and TANSO-CAI-2 is the imager observing the aerosols and clouds to compensate the TANSO-FTS-2 data and to grasp the movements of the aerosols such as PM2.5. The mission instruments will adopt the same kinds of instruments as GOSAT. But some improvements will be carried. Based on the results of the preliminary design, the design had been refined in the critical design phase and the results of the design meets all of the requirements on the mission instruments derived from the mission requirements to understand CO2 and CH4 sources and sinks and carbon cycle precisely. To improve the measurement accuracy, the signal to noise ratio will be increased by the extension of the aperture size from 64mm to 73mm and cooling the after optics as well as the thermal detectors. And to increase the number of the useful data, GOSAT-2 will equip the function to avoid the clouds during the observation using the images obtained by the monitor camera in FTS. To observe the carbon monoxide, the 2.3μm observation channel will be added. This function will be realized by the extension of the 2.0μm observation band to 2.3μm. The pointing angle in the along track direction will be extend from 20 degrees of GOSAT to 40 degrees to expand the observation area over the ocean where the sun glint is observed. This will make it possible to increase the number

  15. Eco-design vs. eco-innovation: an industrial survey

    OpenAIRE

    Cluzel, François; Vallet, Flore; Tyl, Benjamin; Leroy, Yann

    2014-01-01

    International audience; This paper aimed at defining the features and goals of eco-innovation compared to eco-design in industry. Both academic and normative approaches have difficulties establishing sharp boundaries, as shown by a survey conducted with 12 French industrial organizations. As an emerging topic, eco-innovation is not supported by any structured process. Eco-innovative products are sometimes created but they mainly result from economic and environmental constraints. A crucial qu...

  16. Assessing the Learning Environment for Medical Students: An Evaluation of a Novel Survey Instrument in Four Medical Schools.

    Science.gov (United States)

    Pololi, Linda H; Evans, Arthur T; Nickell, Leslie; Reboli, Annette C; Coplit, Lisa D; Stuber, Margaret L; Vasiliou, Vasilia; Civian, Janet T; Brennan, Robert T

    2017-06-01

    A practical, reliable, and valid instrument is needed to measure the impact of the learning environment on medical students' well-being and educational experience and to meet medical school accreditation requirements. From 2012 to 2015, medical students were surveyed at the end of their first, second, and third year of studies at four medical schools. The survey assessed students' perceptions of the following nine dimensions of the school culture: vitality, self-efficacy, institutional support, relationships/inclusion, values alignment, ethical/moral distress, work-life integration, gender equity, and ethnic minority equity. The internal reliability of each of the nine dimensions was measured. Construct validity was evaluated by assessing relationships predicted by our conceptual model and prior research. Assessment was made of whether the measurements were sensitive to differences over time and across institutions. Six hundred and eighty-six students completed the survey (49 % women; 9 % underrepresented minorities), with a response rate of 89 % (range over the student cohorts 72-100 %). Internal consistency of each dimension was high (Cronbach's α 0.71-0.86). The instrument was able to detect significant differences in the learning environment across institutions and over time. Construct validity was supported by demonstrating several relationships predicted by our conceptual model. The C-Change Medical Student Survey is a practical, reliable, and valid instrument for assessing the learning environment of medical students. Because it is sensitive to changes over time and differences across institution, results could potentially be used to facilitate and monitor improvements in the learning environment of medical students.

  17. Michelson Interferometer for Global High-Resolution Thermospheric Imaging (MIGHTI): Instrument Design and Calibration

    Science.gov (United States)

    Englert, Christoph R.; Harlander, John M.; Brown, Charles M.; Marr, Kenneth D.; Miller, Ian J.; Stump, J. Eloise; Hancock, Jed; Peterson, James Q.; Kumler, Jay; Morrow, William H.; Mooney, Thomas A.; Ellis, Scott; Mende, Stephen B.; Harris, Stewart E.; Stevens, Michael H.; Makela, Jonathan J.; Harding, Brian J.; Immel, Thomas J.

    2017-04-01

    The Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI) instrument was built for launch and operation on the NASA Ionospheric Connection Explorer (ICON) mission. The instrument was designed to measure thermospheric horizontal wind velocity profiles and thermospheric temperature in altitude regions between 90 km and 300 km, during day and night. For the wind measurements it uses two perpendicular fields of view pointed at the Earth's limb, observing the Doppler shift of the atomic oxygen red and green lines at 630.0 nm and 557.7 nm wavelength. The wavelength shift is measured using field-widened, temperature compensated Doppler Asymmetric Spatial Heterodyne (DASH) spectrometers, employing low order échelle gratings operating at two different orders for the different atmospheric lines. The temperature measurement is accomplished by a multichannel photometric measurement of the spectral shape of the molecular oxygen A-band around 762 nm wavelength. For each field of view, the signals of the two oxygen lines and the A-band are detected on different regions of a single, cooled, frame transfer charge coupled device (CCD) detector. On-board calibration sources are used to periodically quantify thermal drifts, simultaneously with observing the atmosphere. The MIGHTI requirements, the resulting instrument design and the calibration are described.

  18. Software design for the VIS instrument onboard the Euclid mission: a multilayer approach

    Science.gov (United States)

    Galli, E.; Di Giorgio, A. M.; Pezzuto, S.; Liu, S. J.; Giusi, G.; Li Causi, G.; Farina, M.; Cropper, M.; Denniston, J.; Niemi, S.

    2014-07-01

    The Euclid mission scientific payload is composed of two instruments: a VISible Imaging Instrument (VIS) and a Near Infrared Spectrometer and Photometer instrument (NISP). Each instrument has its own control unit. The Instrument Command and Data Processing Unit (VI-CDPU) is the control unit of the VIS instrument. The VI-CDPU is connected directly to the spacecraft by means of a MIL-STD-1553B bus and to the satellite Mass Memory Unit via a SpaceWire link. All the internal interfaces are implemented via SpaceWire links and include 12 high speed lines for the data provided by the 36 focal plane CCDs readout electronics (ROEs) and one link to the Power and Mechanisms Control Unit (VI-PMCU). VI-CDPU is in charge of distributing commands to the instrument sub-systems, collecting their housekeeping parameters and monitoring their health status. Moreover, the unit has the task of acquiring, reordering, compressing and transferring the science data to the satellite Mass Memory. This last feature is probably the most challenging one for the VI-CDPU, since stringent constraints about the minimum lossless compression ratio, the maximum time for the compression execution and the maximum power consumption have to be satisfied. Therefore, an accurate performance analysis at hardware layer is necessary, which could delay too much the design and development of software. In order to mitigate this risk, in the multilayered design of software we decided to design a middleware layer that provides a set of APIs with the aim of hiding the implementation of the HW connected layer to the application one. The middleware is built on top of the Operating System layer (which includes the Real-Time OS that will be adopted) and the onboard Computer Hardware. The middleware itself has a multi-layer architecture composed of 4 layers: the Abstract RTOS Adapter Layer (AOSAL), the Speci_c RTOS Adapter Layer (SOSAL), the Common Patterns Layer (CPL), the Service Layer composed of two subgroups which

  19. Impact of Passive Safety on FHR Instrumentation Systems Design and Classification

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David Eugene [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-01-01

    Fluoride salt-cooled high-temperature reactors (FHRs) will rely more extensively on passive safety than earlier reactor classes. 10CFR50 Appendix A, General Design Criteria for Nuclear Power Plants, establishes minimum design requirements to provide reasonable assurance of adequate safety. 10CFR50.69, Risk-Informed Categorization and Treatment of Structures, Systems and Components for Nuclear Power Reactors, provides guidance on how the safety significance of systems, structures, and components (SSCs) should be reflected in their regulatory treatment. The Nuclear Energy Institute (NEI) has provided 10 CFR 50.69 SSC Categorization Guideline (NEI-00-04) that factors in probabilistic risk assessment (PRA) model insights, as well as deterministic insights, through an integrated decision-making panel. Employing the PRA to inform deterministic requirements enables an appropriately balanced, technically sound categorization to be established. No FHR currently has an adequate PRA or set of design basis accidents to enable establishing the safety classification of its SSCs. While all SSCs used to comply with the general design criteria (GDCs) will be safety related, the intent is to limit the instrumentation risk significance through effective design and reliance on inherent passive safety characteristics. For example, FHRs have no safety-significant temperature threshold phenomena, thus enabling the primary and reserve reactivity control systems required by GDC 26 to be passively, thermally triggered at temperatures well below those for which core or primary coolant boundary damage would occur. Moreover, the passive thermal triggering of the primary and reserve shutdown systems may relegate the control rod drive motors to the control system, substantially decreasing the amount of safety-significant wiring needed. Similarly, FHR decay heat removal systems are intended to be running continuously to minimize the amount of safety-significant instrumentation needed to initiate

  20. The optical design of the G-CLEF Spectrograph: the first light instrument for the GMT

    Science.gov (United States)

    Ben-Ami, Sagi; Epps, Harland; Evans, Ian; Mueller, Mark; Podgorski, William; Szentgyorgyi, Andrew

    2016-08-01

    The GMT-Consortium Large Earth Finder (G-CLEF), the first major light instrument for the GMT, is a fiber-fed, high-resolution echelle spectrograph. In the following paper, we present the optical design of G-CLEF. We emphasize the unique solutions derived for the spectrograph fiber-feed: the Mangin mirror that corrects the cylindrical field curvature, the implementation of VPH grisms as cross dispersers, and our novel solution for a multi-colored exposure meter. We describe the spectrograph blue and red cameras comprised of 7 and 8 elements respectively, with one aspheric surface in each camera, and present the expected echellogram imaged on the instrument focal planes. Finally, we present ghost analysis and mitigation strategy that takes into account both single reflection and double reflection back scattering from various elements in the optical train.

  1. Design modification and stress analysis of bottom structure for the instrumented capsule

    Energy Technology Data Exchange (ETDEWEB)

    Choi, M. H.; Kang, Y. H.; Joo, K. N.; Oh, J. M.; Joe, M. S.; Ryu, J. S.; Jeo, Y. G. [KAERI, Taejon (Korea, Republic of)

    2003-10-01

    The bottom structure of the instrumented capsule, which is used for the irradiation test in the HANARO incore, plays an important role to support the capsule main structure within the hexagonal flow tube. This paper is described the design modification and stress analysis results to obtain the structural integrity of bottom structure for the instrumented capsule. The capsule's bottom guide structure consisted of three guide pins before, but it is modified as one block structure to obtain an efficient flow of coolant water and a stabilized shape structurally. The structural integrity of the bottom structure is estimated by the stress calculation of components such as welding parts, bolts and neck parts of the rod tip due to the force applied by handling tool. The tensile and shear stresses are calculated by using a mechanical formulas, and a finite element model development is planned to be performed for more complex assembly of the capsule bottom structure.

  2. VIDA, a hypertelescope on the VLTI: last instrument design studies and performance analysis

    Science.gov (United States)

    Lardiere, Olivier; Mourard, Denis; Patru, Fabien; Carbillet, Marcel

    2004-10-01

    According to the "hypertelescope" imaging mode, stellar interferometers could provide direct snapshot images. Whereas the Fizeau imaging mode is useless when the aperture is highly diluted, a "densified-pupil" or "hypertelescope" imaging mode can concentrate most light into the high-resolution central interference peak, allowing direct imaging of compact sources and stellar coronagraphy for exoplanets finding. The current VLTI is able to combine light from 2 to 3 telescopes coherently, but the combination of 4 to 8 beams is foreseen in subsequent phases. In order to exploit the full forthcoming VLTI infrastructure, a next generation instrument has been proposed (VIDA) in 2002 for very high-resolution snapshot imaging with UTs and/or ATs. This paper presents a new attractive design studied for this instrument using single mode optical fibers and allowing a multi-field imaging mode. We also give the expected performances with a coronagraph, computed from numerical simulations including cophasing and adaptive optics residual errors.

  3. New trends in instrumental design for surface plasmon resonance-based biosensors.

    Science.gov (United States)

    Abbas, Abdennour; Linman, Matthew J; Cheng, Quan

    2011-01-15

    Surface plasmon resonance (SPR)-based biosensing is one of the most advanced label free, real time detection technologies. Numerous research groups with divergent scientific backgrounds have investigated the application of SPR biosensors and studied the fundamental aspects of surface plasmon polaritons that led to new, related instrumentation. As a result, this field continues to be at the forefront of evolving sensing technology. This review emphasizes the new developments in the field of SPR-related instrumentation including optical platforms, chips design, nanoscale approach and new materials. The current tendencies in SPR-based biosensing are identified and the future direction of SPR biosensor technology is broadly discussed. Copyright © 2010 Elsevier B.V. All rights reserved.

  4. Nearest Neighbor Averaging and its Effect on the Critical Level and Minimum Detectable Concentration for Scanning Radiological Survey Instruments that Perform Facility Release Surveys.

    Energy Technology Data Exchange (ETDEWEB)

    Fournier, Sean Donovan; Beall, Patrick S; Miller, Mark L

    2014-08-01

    Through the SNL New Mexico Small Business Assistance (NMSBA) program, several Sandia engineers worked with the Environmental Restoration Group (ERG) Inc. to verify and validate a novel algorithm used to determine the scanning Critical Level (L c ) and Minimum Detectable Concentration (MDC) (or Minimum Detectable Areal Activity) for the 102F scanning system. Through the use of Monte Carlo statistical simulations the algorithm mathematically demonstrates accuracy in determining the L c and MDC when a nearest-neighbor averaging (NNA) technique was used. To empirically validate this approach, SNL prepared several spiked sources and ran a test with the ERG 102F instrument on a bare concrete floor known to have no radiological contamination other than background naturally occurring radioactive material (NORM). The tests conclude that the NNA technique increases the sensitivity (decreases the L c and MDC) for high-density data maps that are obtained by scanning radiological survey instruments.

  5. Use of electronic microprocessor-based instrumentation by the U.S. geological survey for hydrologic data collection

    Science.gov (United States)

    Shope, William G.; ,

    1991-01-01

    The U.S. Geological Survey is acquiring a new generation of field computers and communications software to support hydrologic data-collection at field locations. The new computer hardware and software mark the beginning of the Survey's transition from the use of electromechanical devices and paper tapes to electronic microprocessor-based instrumentation. Software is being developed for these microprocessors to facilitate the collection, conversion, and entry of data into the Survey's National Water Information System. The new automated data-collection process features several microprocessor-controlled sensors connected to a serial digital multidrop line operated by an electronic data recorder. Data are acquired from the sensors in response to instructions programmed into the data recorder by the user through small portable lap-top or hand-held computers. The portable computers, called personal field computers, also are used to extract data from the electronic recorders for transport by courier to the office computers. The Survey's alternative to manual or courier retrieval is the use of microprocessor-based remote telemetry stations. Plans have been developed to enhance the Survey's use of the Geostationary Operational Environmental Satellite telemetry by replacing the present network of direct-readout ground stations with less expensive units. Plans also provide for computer software that will support other forms of telemetry such as telephone or land-based radio.

  6. Design of an instrument to measure the quality of care in Physical Therapy

    Science.gov (United States)

    Cavalheiro, Leny Vieira; Eid, Raquel Afonso Caserta; Talerman, Claudia; do Prado, Cristiane; Gobbi, Fátima Cristina Martorano; Andreoli, Paola Bruno de Araujo

    2015-01-01

    ABSTRACT Objective: To design an instrument composed of domains that would demonstrate physical therapy activities and generate a consistent index to represent the quality of care in physical therapy. Methods: The methodology Lean Six Sigma was used to design the tool. The discussion involved seven different management groups staff. By means of brainstorming and Cause & Effect Matrix, we set up the process map. Results: Five requirements composed the quality of care index in physical therapy, after application of the tool called Cause & Effect Matrix. The following requirements were assessed: physical therapist performance, care outcome indicator, adherence to physical therapy protocols, measure whether the prognosis and treatment outcome was achieved and Infrastructure. Conclusion: The proposed design allowed evaluating several items related to physical therapy service, enabling customization, reproducibility and benchmarking with other organizations. For management, this index provides the opportunity to identify areas for improvement and the strengths of the team and process of physical therapy care. PMID:26154548

  7. The ZEPLIN-III dark matter detector: instrument design, manufacture and commissioning

    CERN Document Server

    Akimov, D Y; Araújo, H M; Bewick, A; Bungau, C; Burenkov, A A; Carson, M J; Chepel, V Yu; Cline, D; Davidge, D; Davies, J C; Daw, E; Dawson, J; Durkin, T; Edwards, B; Gamble, T; Chag, C; Hollingworth, R J; Howard, A S; Jones, W G; Joshi, M; Kirkpatrick, J; Kovalenko, A; Kudryavtsev, V A; Kuznetsov, I S; Lawson, T; Lebedenko, V N; Lewin, J D; Lightfoot, P; Lindote, A; Liubarsky, I; Lopes, M I; Lüscher, R; McMillan, J E; Morgan, B; Muna, D; Murphy, A S; Neves, F; Nicklin, G G; Paling, S M; Cunha, J P; Plank, S J S; Preece, R; Quenby, J J; Robinson, M; Silva, C; Solovov, V N; Smith, N J T; Smith, P F; Spooner, N J C; Stekhanov, V; Sumner, T J; Thorne, C; Tovey, Daniel R; Tziaferi, E; Walker, R J; Wang, H; Wolfs, J W F

    2006-01-01

    We present details of the technical design and manufacture of the ZEPLIN-III dark matter experiment. ZEPLIN-III is a two-phase xenon detector which measures both the scintillation light and the ionisation charge generated in the liquid by interacting particles and radiation. The instrument design is driven by both the physics requirements and by the technology requirements surrounding the use of liquid xenon. These include considerations of key performance parameters, such as the efficiency of scintillation light collection, restrictions placed on the use of materials to control the inherent radioactivity levels, attainment of high vacuum levels and chemical contamination control. The successful solution has involved a number of novel design and manufacturing features which will be of specific use to future generations of direct dark matter search experiments as they struggle with similar and progressively more demanding requirements.

  8. A systematic survey instrument translation process for multi-country, comparative health workforce studies

    NARCIS (Netherlands)

    Squires, A.; Aiken, L.H.; Heede, K. Van den; Sermeus, W.; Bruyneel, L.; Lindqvist, R.; Schoonhoven, L.; Stromseng, I.; Busse, R.; Brzostek, T.; Ensio, A.; Moreno-Casbas, M.; Rafferty, A.M.; Schubert, M.; Zikos, D.; Matthews, A.

    2013-01-01

    BACKGROUND: As health services research (HSR) expands across the globe, researchers will adopt health services and health worker evaluation instruments developed in one country for use in another. This paper explores the cross-cultural methodological challenges involved in translating HSR in the

  9. Radioisotope instruments

    CERN Document Server

    Cameron, J F; Silverleaf, D J

    1971-01-01

    International Series of Monographs in Nuclear Energy, Volume 107: Radioisotope Instruments, Part 1 focuses on the design and applications of instruments based on the radiation released by radioactive substances. The book first offers information on the physical basis of radioisotope instruments; technical and economic advantages of radioisotope instruments; and radiation hazard. The manuscript then discusses commercial radioisotope instruments, including radiation sources and detectors, computing and control units, and measuring heads. The text describes the applications of radioisotop

  10. The 2-degree Field Lensing Survey: design and clustering measurements

    CERN Document Server

    Blake, Chris; Childress, Michael; Erben, Thomas; Glazebrook, Karl; Harnois-Deraps, Joachim; Heymans, Catherine; Hildebrandt, Hendrik; Hinton, Samuel R; Janssens, Steven; Johnson, Andrew; Joudaki, Shahab; Klaes, Dominik; Kuijken, Konrad; Lidman, Chris; Marin, Felipe A; Parkinson, David; Poole, Gregory B; Wolf, Christian

    2016-01-01

    We present the 2-degree Field Lensing Survey (2dFLenS), a new galaxy redshift survey performed at the Anglo-Australian Telescope. 2dFLenS is the first wide-area spectroscopic survey specifically targeting the area mapped by deep-imaging gravitational lensing fields, in this case the Kilo-Degree Survey. 2dFLenS obtained 70,079 redshifts in the range z < 0.9 over an area of 731 sq deg, and is designed to extend the datasets available for testing gravitational physics and promote the development of relevant algorithms for joint imaging and spectroscopic analysis. The redshift sample consists first of 40,531 Luminous Red Galaxies (LRGs), which enable analyses of galaxy-galaxy lensing, redshift-space distortion, and the overlapping source redshift distribution by cross-correlation. An additional 28,269 redshifts form a magnitude-limited (r < 19.5) nearly-complete sub-sample, allowing direct source classification and photometric-redshift calibration. In this paper, we describe the motivation, target selection...

  11. Measuring patient experiences with diabetes care in The Netherlands: the validity of a new survey instrument.

    NARCIS (Netherlands)

    Asbroek, G. ten; Delnoij, D.M.J.; Arah, O.A.; Sixma, H.; Koning, J.S. de; Rupp, I.; Poll, A.; Stam, P.J.A.; Schmidt, P.; Vriens, B.; Klazinga, N.S.

    2005-01-01

    Background: The introduction of market mechanisms in Dutch healthcare engages insurance companies in competition. Patient experience surveys are increasingly applied to generate performance information guiding consumers and insurers to choose and contract high performers, as well as holding them acc

  12. Design and validation of the Quantum Mechanics Conceptual Survey

    Directory of Open Access Journals (Sweden)

    S. B. McKagan

    2010-11-01

    Full Text Available The Quantum Mechanics Conceptual Survey (QMCS is a 12-question survey of students’ conceptual understanding of quantum mechanics. It is intended to be used to measure the relative effectiveness of different instructional methods in modern physics courses. In this paper, we describe the design and validation of the survey, a process that included observations of students, a review of previous literature and textbooks and syllabi, faculty and student interviews, and statistical analysis. We also discuss issues in the development of specific questions, which may be useful both for instructors who wish to use the QMCS in their classes and for researchers who wish to conduct further research of student understanding of quantum mechanics. The QMCS has been most thoroughly tested in, and is most appropriate for assessment of (as a posttest only, sophomore-level modern physics courses. We also describe testing with students in junior quantum courses and graduate quantum courses, from which we conclude that the QMCS may be appropriate for assessing junior quantum courses, but is not appropriate for assessing graduate courses. One surprising result of our faculty interviews is a lack of faculty consensus on what topics should be taught in modern physics, which has made designing a test that is valued by a majority of physics faculty more difficult than expected.

  13. Design and validation of the Quantum Mechanics Conceptual Survey

    Directory of Open Access Journals (Sweden)

    C. E. Wieman

    2010-11-01

    Full Text Available The Quantum Mechanics Conceptual Survey (QMCS is a 12-question survey of students’ conceptual understanding of quantum mechanics. It is intended to be used to measure the relative effectiveness of different instructional methods in modern physics courses. In this paper, we describe the design and validation of the survey, a process that included observations of students, a review of previous literature and textbooks and syllabi, faculty and student interviews, and statistical analysis. We also discuss issues in the development of specific questions, which may be useful both for instructors who wish to use the QMCS in their classes and for researchers who wish to conduct further research of student understanding of quantum mechanics. The QMCS has been most thoroughly tested in, and is most appropriate for assessment of (as a posttest only, sophomore-level modern physics courses. We also describe testing with students in junior quantum courses and graduate quantum courses, from which we conclude that the QMCS may be appropriate for assessing junior quantum courses, but is not appropriate for assessing graduate courses. One surprising result of our faculty interviews is a lack of faculty consensus on what topics should be taught in modern physics, which has made designing a test that is valued by a majority of physics faculty more difficult than expected.

  14. Planck pre-launch status: Design and description of the Low Frequency Instrument

    CERN Document Server

    Bersanelli, M; Butler, R C; Mennella, A; Villa, F; Aja, B; Artal, E; Artina, E; Baccigalupi, C; Balasini, M; Baldan, G; Banday, A; Bastia, P; Battaglia, P; Bernardino, T; Blackhurst, E; Boschini, L; Burigana, C; Cafagna, G; Cappellini, B; Cavaliere, F; Colombo, F; Crone, G; Cuttaia, F; D'Arcangelo, O; Danese, L; Davies, R D; Davis, R J; De Angelis, L; De Gasperis, G C; De La Fuente, L; De Rosa, A; De Zotti, G; Falvella, M C; Ferrari, F; Ferretti, R; Figini, L; Fogliani, S; Franceschet, C; Franceschi, E; Gaier, T; Garavaglia, S; Gomez, F; Gorski, K; Gregorio, A; Guzzi, P; Herreros, J M; Hildebrandt, S R; Hoyland, R; Hughes, N; Janssen, M; Jukkala, P; Kettle, D; Kilpia, V H; Laaninen, M; Lapolla, P M; Lawrence, C R; Leahy, J P; Leonardi, R; Leutenegger, P; Levin, S; Lilje, P B; Lowe, S R; Lubin, D Lawson P M; Maino, D; Malaspina, M; Maris, M; Marti-Canales, J; Martinez-Gonzalez, E; Mediavilla, A; Meinhold, P; Miccolis, M; Morgante, G; Natoli, P; Nesti, R; Pagan, L; Paine, C; Partridge, B; Pascual, J P; Pasian, F; Pearson, D; Pecora, M; Perrotta, F; Platania, P; Pospieszalski, M; Poutanen, T; Prina, M; Rebolo, R; Roddis, N; Rubino-Martin, J A; Salmon, n M J; Sandri, M; Seiffert, M; Silvestri, R; Simonetto, A; Sjoman, P; Smoot, G F; Sozzi, C; Stringhetti, L; Taddei, E; Tauber, J; Terenzi, L; Tomasi, M; Tuovinen, J; Valenziano, L; Varis, J; Vittorio, N; Wade, L A; Wilkinson, A; Winder, F; Zacchei, A; Zonca, A

    2010-01-01

    In this paper we present the Low Frequency Instrument (LFI), designed and developed as part of the Planck space mission, the ESA program dedicated to precision imaging of the cosmic microwave background (CMB). Planck-LFI will observe the full sky in intensity and polarisation in three frequency bands centred at 30, 44 and 70 GHz, while higher frequencies (100-850 GHz) will be covered by the HFI instrument. The LFI is an array of microwave radiometers based on state-of-the-art Indium Phosphide cryogenic HEMT amplifiers implemented in a differential system using blackbody loads as reference signals. The front-end is cooled to 20K for optimal sensitivity and the reference loads are cooled to 4K to minimise low frequency noise. We provide an overview of the LFI, discuss the leading scientific requirements and describe the design solutions adopted for the various hardware subsystems. The main drivers of the radiometric, optical and thermal design are discussed, including the stringent requirements on sensitivity, ...

  15. Designing a minimum-functionality neutron and gamma measurement instrument with a focus on authentication

    Energy Technology Data Exchange (ETDEWEB)

    Karpius, Peter J [Los Alamos National Laboratory; Williams, Richard B [Los Alamos National Laboratory

    2009-01-01

    During the design and construction of the Next-Generation Attribute-Measurement System, which included a largely commercial off-the-shelf (COTS), nondestructive assay (NDA) system, we realized that commercial NDA equipment tends to include numerous features that are not required for an attribute-measurement system. Authentication of the hardware, firmware, and software in these instruments is still required, even for those features not used in this application. However, such a process adds to the complexity, cost, and time required for authentication. To avoid these added authenticat ion difficulties, we began to design NDA systems capable of performing neutron multiplicity and gamma-ray spectrometry measurements by using simplified hardware and software that avoids unused features and complexity. This paper discusses one possible approach to this design: A hardware-centric system that attempts to perform signal analysis as much as possible in the hardware. Simpler processors and minimal firmware are used because computational requirements are kept to a bare minimum. By hard-coding the majority of the device's operational parameters, we could cull large sections of flexible, configurable hardware and software found in COTS instruments, thus yielding a functional core that is more straightforward to authenticate.

  16. Conceptual design of a miniaturized hybrid local actuator for Minimally Invasive Robotic Surgery (MIRS) instruments.

    Science.gov (United States)

    Saedi, Soheil; Mirbagheri, Alireza; Farahmand, Farzam

    2011-01-01

    The actuation mechanism of the tip of an endoscopic instrument is a major problem in designing miniature scale motorized instruments, especially when a high level of functionality and multi degrees of freedom (DOF) are concerned. We evaluated the different possible actuation methods for an endoscopic needle holder and proposed a new design of hybrid local-actuation, including a micro DC motor and a piezoelectric (PZT) actuator. The DC motor provided the long movement course required for opening-closing function of the gripper while the PZT guaranteed the high gripping force required for holding the needle. A compact serial configuration was considered for the actuators, producing an overall size of 10 mm in diameter and 39 mm in length, so that it could be implemented in the limited space available. The efficacy of the design was analyzed in a simulation study, using FEM and it was shown that the needle holder is capable to apply a sufficiently high gripping force of 22 N.

  17. GASS: The Parkes Galactic All-Sky Survey. Update: improved correction for instrumental effects and new data release

    Science.gov (United States)

    Kalberla, P. M. W.; Haud, U.

    2015-06-01

    Context. The Galactic All-Sky Survey (GASS) is a survey of Galactic atomic hydrogen (H i) emission in the southern sky observed with the Parkes 64-m Radio Telescope. The first data release (GASS I) concerned survey goals and observing techniques, the second release (GASS II) focused on stray radiation and instrumental corrections. Aims: We seek to remove the remaining instrumental effects and present a third data release. Methods: We use the HEALPix tessellation concept to grid the data on the sphere. Individual telescope records are compared with averages on the nearest grid position for significant deviations. All averages are also decomposed into Gaussian components with the aim of segregating unacceptable solutions. Improved priors are used for an iterative baseline fitting and cleaning. In the last step we generate 3D FITS data cubes and examine them for remaining problems. Results: We have removed weak, but systematic baseline offsets with an improved baseline fitting algorithm. We have unraveled correlator failures that cause time dependent oscillations; errors cause stripes in the scanning direction. The remaining problems from radio frequency interference (RFI) are spotted. Classifying the severeness of instrumental errors for each individual telescope record (dump) allows us to exclude bad data from averages. We derive parameters that allow us to discard dumps without compromising the noise of the resulting data products too much. All steps are reiterated several times: in each case, we check the Gaussian parameters for remaining problems and inspect 3D FITS data cubes visually. We find that in total ~1.5% of the telescope dumps need to be discarded in addition to ~0.5% of the spectral channels that were excluded in GASS II. Conclusions: The new data release (GASS III) facilitates data products with improved quality. A new web interface, compatible with the previous version, is available for download of GASS III FITS cubes and spectra.

  18. Survey on Chatbot Design Techniques in Speech Conversation Systems

    Directory of Open Access Journals (Sweden)

    Sameera A. Abdul-Kader

    2015-07-01

    Full Text Available Human-Computer Speech is gaining momentum as a technique of computer interaction. There has been a recent upsurge in speech based search engines and assistants such as Siri, Google Chrome and Cortana. Natural Language Processing (NLP techniques such as NLTK for Python can be applied to analyse speech, and intelligent responses can be found by designing an engine to provide appropriate human like responses. This type of programme is called a Chatbot, which is the focus of this study. This paper presents a survey on the techniques used to design Chatbots and a comparison is made between different design techniques from nine carefully selected papers according to the main methods adopted. These papers are representative of the significant improvements in Chatbots in the last decade. The paper discusses the similarities and differences in the techniques and examines in particular the Loebner prize-winning Chatbots.

  19. The Stratospheric Aerosol and Gas Experiment III instrument proposed for EOS - A conceptual design

    Science.gov (United States)

    Mauldin, L. E.; Mccormick, M. P.; Zawodny, J. M.; Mcmaster, L. R.; Chu, W. P.; Gustafson, J. C.; Maddrea, G. L.

    1989-01-01

    This paper describes the Stratospheric Aerosol and Gas Experiment III (SAGE III) instrument proposed for the Earth Observing System (EOS), which is designed to monitor the vertical distribution of stratospheric aerosols, ozone, water vapor, nitrogen dioxide, and temperature by measuring the extinction and scattering of solar radiation in the 03 to 1.6 micron range through the atmosphere. The SAGE III employs proven concepts which have evolved from the SAM II, SAGE, and SAGE II programs. The launch is scheduled for the summer of 1996. The SAGE II block diagram is included.

  20. Using the Rasch measurement model to design a report writing assessment instrument.

    Science.gov (United States)

    Carlson, Wayne R

    2013-01-01

    This paper describes how the Rasch measurement model was used to develop an assessment instrument designed to measure student ability to write law enforcement incident and investigative reports. The ability to write reports is a requirement of all law enforcement recruits in the state of Michigan and is a part of the state's mandatory basic training curriculum, which is promulgated by the Michigan Commission on Law Enforcement Standards (MCOLES). Recently, MCOLES conducted research to modernize its training and testing in the area of report writing. A structured validation process was used, which included: a) an examination of the job tasks of a patrol officer, b) input from content experts, c) a review of the professional research, and d) the creation of an instrument to measure student competency. The Rasch model addressed several measurement principles that were central to construct validity, which were particularly useful for assessing student performances. Based on the results of the report writing validation project, the state established a legitimate connectivity between the report writing standard and the essential job functions of a patrol officer in Michigan. The project also produced an authentic instrument for measuring minimum levels of report writing competency, which generated results that are valid for inferences of student ability. Ultimately, the state of Michigan must ensure the safety of its citizens by licensing only those patrol officers who possess a minimum level of core competency. Maintaining the validity and reliability of both the training and testing processes can ensure that the system for producing such candidates functions as intended.

  1. Design and application of new low-cost instruments for marine environmental research.

    Science.gov (United States)

    Marcelli, Marco; Piermattei, Viviana; Madonia, Alice; Mainardi, Umberto

    2014-12-05

    The development of low-cost instrumentation plays a key role in marine environmental studies and represents one of the most innovative aspects of current oceanographic research. These kinds of devices can be used for several applications, ranging from vertical profilers to stand-alone systems, and can be installed on different platforms (buoys, Voluntary Observing Ships, underwater vehicles, etc.). The availability of low-cost technologies enables the realization of extended observatory networks for the study of marine physical and biological processes through an integrated approach merging in situ observations, forecasting models and remotely sensed data. We present new low-cost sensors and probes developed to measure marine temperature, conductivity, chlorophyll a and Chromophoric Dissolved Organic Matter fluorescence, focusing on sensing strategies, general architecture, laboratory trials, in situ tests and comparison with standard instruments. Furthermore, we report the expendable (New T-FLaP), vertical profiler (T-FLaPpro) and stand-alone (Spectra) applications of these technological developments that were tested during several oceanographic surveys in the Mediterranean Sea.

  2. Design and Application of New Low-Cost Instruments for Marine Environmental Research

    Directory of Open Access Journals (Sweden)

    Marco Marcelli

    2014-12-01

    Full Text Available The development of low-cost instrumentation plays a key role in marine environmental studies and represents one of the most innovative aspects of current oceanographic research. These kinds of devices can be used for several applications, ranging from vertical profilers to stand-alone systems, and can be installed on different platforms (buoys, Voluntary Observing Ships, underwater vehicles, etc.. The availability of low-cost technologies enables the realization of extended observatory networks for the study of marine physical and biological processes through an integrated approach merging in situ observations, forecasting models and remotely sensed data. We present new low-cost sensors and probes developed to measure marine temperature, conductivity, chlorophyll a and Chromophoric Dissolved Organic Matter fluorescence, focusing on sensing strategies, general architecture, laboratory trials, in situ tests and comparison with standard instruments. Furthermore, we report the expendable (New T-FLaP, vertical profiler (T-FLaPpro and stand-alone (Spectra applications of these technological developments that were tested during several oceanographic surveys in the Mediterranean Sea.

  3. Design and Testing of an Assessment Instrument to Measure Understanding of Protein Structure and Enzyme Inhibition in a New Context

    Science.gov (United States)

    Villafañe, Sachel M.; Heyen, Bruce J.; Lewis, Jennifer E.; Loertscher, Jennifer; Minderhout, Vicky; Murray, Tracey Arnold

    2016-01-01

    Assessment instruments designed to measure student conceptual understanding and skills proficiency related to biochemistry are important to transform undergraduate biochemistry education. The purpose of this study was to develop an assessment instrument to measure student understanding of protein structure and enzyme inhibition in a new context,…

  4. Design and validation of a standards-based science teacher efficacy instrument

    Science.gov (United States)

    Kerr, Patricia Reda

    National standards for K--12 science education address all aspects of science education, with their main emphasis on curriculum---both science subject matter and the process involved in doing science. Standards for science teacher education programs have been developing along a parallel plane, as is self-efficacy research involving classroom teachers. Generally, studies about efficacy have been dichotomous---basing the theoretical underpinnings on the work of either Rotter's Locus of Control theory or on Bandura's explanations of efficacy beliefs and outcome expectancy. This study brings all three threads together---K--12 science standards, teacher education standards, and efficacy beliefs---in an instrument designed to measure science teacher efficacy with items based on identified critical attributes of standards-based science teaching and learning. Based on Bandura's explanation of efficacy being task-specific and having outcome expectancy, a developmental, systematic progression from standards-based strategies and activities to tasks to critical attributes was used to craft items for a standards-based science teacher efficacy instrument. Demographic questions related to school characteristics, teacher characteristics, preservice background, science teaching experience, and post-certification professional development were included in the instrument. The instrument was completed by 102 middle level science teachers, with complete data for 87 teachers. A principal components analysis of the science teachers' responses to the instrument resulted in two components: Standards-Based Science Teacher Efficacy: Beliefs About Teaching (BAT, reliability = .92) and Standards-Based Science Teacher Efficacy: Beliefs About Student Achievement (BASA, reliability = .82). Variables that were characteristic of professional development activities, science content preparation, and school environment were identified as members of the sets of variables predicting the BAT and BASA

  5. SEDS: THE SPITZER EXTENDED DEEP SURVEY. SURVEY DESIGN, PHOTOMETRY, AND DEEP IRAC SOURCE COUNTS

    Energy Technology Data Exchange (ETDEWEB)

    Ashby, M. L. N.; Willner, S. P.; Fazio, G. G.; Huang, J.-S.; Hernquist, L.; Hora, J. L. [Harvard-Smithsonian Center for Astrophysics, 60 Garden St., Cambridge, MA 02138 (United States); Arendt, R. [Observational Cosmology Laboratory, Code 665, Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Barmby, P. [University of Western Ontario, London, ON N6A 3K7 (Canada); Barro, G.; Faber, S.; Guhathakurta, P. [University of California Observatories/Lick Observatory and Department of Astronomy and Astrophysics University of California Santa Cruz, 1156 High St., Santa Cruz, CA 95064 (United States); Bell, E. F. [Department of Astronomy, University of Michigan, 500 Church St., Ann Arbor, MI 48109 (United States); Bouwens, R. [Leiden Observatory, Leiden University, NL-2300 RA Leiden (Netherlands); Cattaneo, A. [Aix Marseille Universite, CNRS, Laboratoire d' Astrophysique de Marseille, UMR 7326, F-13388, Marseille (France); Croton, D. [Centre for Astrophysics and Supercomputing, Swinburne University of Technology, P.O. Box 218 Hawthorn, VIC 3122 (Australia); Dave, R. [Department of Astronomy, University of Arizona, Tucson, AZ 85721 (United States); Dunlop, J. S. [Scottish Universities Physics Alliance, Institute for Astronomy, University of Edinburgh, Royal Observatory, Edinburgh, EH9 3HJ (United Kingdom); Egami, E. [Steward Observatory, University of Arizona, 933 N. Cherry Ave, Tucson, AZ 85721 (United States); Finlator, K. [Dark Cosmology Centre, Niels Bohr Institute, University of Copenhagen, Juliane Maries Vej 30, CK-2100 Copenhagen O (Denmark); Grogin, N. A., E-mail: mashby@cfa.harvard.edu [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); and others

    2013-05-20

    The Spitzer Extended Deep Survey (SEDS) is a very deep infrared survey within five well-known extragalactic science fields: the UKIDSS Ultra-Deep Survey, the Extended Chandra Deep Field South, COSMOS, the Hubble Deep Field North, and the Extended Groth Strip. SEDS covers a total area of 1.46 deg{sup 2} to a depth of 26 AB mag (3{sigma}) in both of the warm Infrared Array Camera (IRAC) bands at 3.6 and 4.5 {mu}m. Because of its uniform depth of coverage in so many widely-separated fields, SEDS is subject to roughly 25% smaller errors due to cosmic variance than a single-field survey of the same size. SEDS was designed to detect and characterize galaxies from intermediate to high redshifts (z = 2-7) with a built-in means of assessing the impact of cosmic variance on the individual fields. Because the full SEDS depth was accumulated in at least three separate visits to each field, typically with six-month intervals between visits, SEDS also furnishes an opportunity to assess the infrared variability of faint objects. This paper describes the SEDS survey design, processing, and publicly-available data products. Deep IRAC counts for the more than 300,000 galaxies detected by SEDS are consistent with models based on known galaxy populations. Discrete IRAC sources contribute 5.6 {+-} 1.0 and 4.4 {+-} 0.8 nW m{sup -2} sr{sup -1} at 3.6 and 4.5 {mu}m to the diffuse cosmic infrared background (CIB). IRAC sources cannot contribute more than half of the total CIB flux estimated from DIRBE data. Barring an unexpected error in the DIRBE flux estimates, half the CIB flux must therefore come from a diffuse component.

  6. A Novel Design for Steerable Instruments Based on Laser-Cut Nitinol

    NARCIS (Netherlands)

    Dewaele, Frank; Kalmar, Alain F.; De Ryck, Frederic; Lumen, Nicolaas; Williams, Leonie; Baert, Edward; Vereecke, Hugo; Okito, Jean Pierre Kalala; Mabilde, Cyriel; Blanckaert, Bart; Keereman, Vincent; Leybaert, Luc; Van Nieuwenhove, Yves; Caemaert, Jacques; Van Roost, Dirk

    2014-01-01

    Objective. Omnidirectional articulated instruments enhance dexterity. In neurosurgery, for example, the simultaneous use of 2 instruments through the same endoscopic shaft remains a difficult feat. It is, however, very challenging to manufacture steerable instruments of the requisite small diameter.

  7. A Novel Design for Steerable Instruments Based on Laser-Cut Nitinol

    NARCIS (Netherlands)

    Dewaele, Frank; Kalmar, Alain F.; De Ryck, Frederic; Lumen, Nicolaas; Williams, Leonie; Baert, Edward; Vereecke, Hugo; Okito, Jean Pierre Kalala; Mabilde, Cyriel; Blanckaert, Bart; Keereman, Vincent; Leybaert, Luc; Van Nieuwenhove, Yves; Caemaert, Jacques; Van Roost, Dirk

    Objective. Omnidirectional articulated instruments enhance dexterity. In neurosurgery, for example, the simultaneous use of 2 instruments through the same endoscopic shaft remains a difficult feat. It is, however, very challenging to manufacture steerable instruments of the requisite small diameter.

  8. Methodological design of the National Health and Nutrition Survey 2016

    Directory of Open Access Journals (Sweden)

    Martín Romero-Martínez

    2017-05-01

    Full Text Available Objective. Describe the design methodology of the halfway health and nutrition national survey (Ensanut-MC 2016. Materials and methods. The Ensanut-MC is a national probabilistic survey whose objective population are the in­habitants of private households in Mexico. The sample size was determined to make inferences on the urban and rural areas in four regions. Describes main design elements: target population, topics of study, sampling procedure, measurement procedure and logistics organization. Results. A final sample of 9 479 completed household interviews, and a sample of 16 591 individual interviews. The response rate for households was 77.9%, and the response rate for individuals was 91.9%. Conclusions. The Ensanut-MC probabilistic design allows valid statistical inferences about interest parameters for Mexico´s public health and nutrition, specifically on over­weight, obesity and diabetes mellitus. Updated information also supports the monitoring, updating and formulation of new policies and priority programs.

  9. Survey Instrument Development for Consumer Perception Testing to RTE Product in Convenience Store

    Directory of Open Access Journals (Sweden)

    Dyah Lestari Widaningrum

    2015-09-01

    Full Text Available Global trade and the abolition of trade barriers lead to the proliferation of imported food products such as various types of fast food products (RTE: ready-to-eat food sold by convenience stores mainly scattered in Jakarta. The question is what causes consumers choose certain convenience store to buy RTE Product and not choose another outlet category. To understand consumer perceptions, it is necessary to develop an instrument for measuring consumer perceptions of the option to purchase RTE Product at convenience stores. Variables used in this research are the perception and knowledge of the public/consumers against food safety, store attributes, service, and product attributes. The instrument used in this study is a questionnaire with a scalemeasuring1-5 to see the relationship between variables, we used the method of Structural Equation Modeling (SEM. The sample used in this study was 223 respondents that were divided into five areas in Jakarta, namely Central Jakarta, West Jakarta, South Jakarta, East Jakarta, and North Jakarta. The final outcome of the instrument development process was 25 observed variables, consisting of 4 indicators, which valid and reliable, with T-values for each observed variable is above 2,58, and Construct Reliability values range between 0,76 to 0,853.

  10. Design of a Micro-Autonomous Robot for Use in Astronomical Instruments

    Science.gov (United States)

    Cochrane, W. A.; Luo, X.; Lim, T.; Taylor, W. D.; Schnetler, H.

    2012-07-01

    A Micro-Autonomous Positioning System (MAPS) has been developed using micro-autonomous robots for the deployment of small mirrors within multi-object astronomical instruments for use on the next generation ground-based telescopes. The micro-autonomous robot is a two-wheel differential drive robot with a footprint of approximately 20 × 20 mm. The robot uses two brushless DC Smoovy motors with 125:1 planetary gearheads for positioning the mirror. This article describes the various elements of the overall system and in more detail the various robot designs. Also described in this article is the build and test of the most promising design, proving that micro-autonomous robot technology can be used in precision controlled applications.

  11. High Precision Full Stokes Spectropolarimetry of the Sun as a star-Instrument design aspects

    CERN Document Server

    Bose, Souvik

    2016-01-01

    The magnetic field plays a major role in governing the dynamics of the sun. Many interesting features like sunspots, flares, prominences, and Coronal Mass Ejections (CMEs) occur on its surface due to the dynamics associated with the magnetic fields. The magnetic activity exhibits spatial scales ranging from very fine scale (below the resolution limit of the current largest telescope) to large scale such as sunspots, active regions and the spatial scales as large as the sun itself. While the major efforts in building large telescopes is going on towards the goal of resolving smallest structure possible we propose here to measure the magnetic field on the global scale. For this purpose we propose an instrument to carryout high precision and high accurate spectropolarimetry of sun-as-a-star. In this thesis, we explore various instrumental design aspects that are necessary to make such observations. As part of the design consideration we have analysed a major noise source i.e. seeing induced cross-talk through si...

  12. The High Cadence Transient Survey (HiTS) - I. Survey design and supernova shock breakout constraints

    CERN Document Server

    Förster, Francisco; Martín, Jaime San; Hamuy, Mario; Martínez, Jorge; Huijse, Pablo; Cabrera, Guillermo; Galbany, Lluís; de Jaeger, Thomas; González-Gaitán, Santiago; Anderson, Joseph P; Kuncarayakti, Hanindyo; Pignata, Giuliano; Bufano, Filomena; Littín, Jorge; Olivares, Felipe; Medina, Gustavo; Smith, R Chris; Vivas, A Katherina; Estévez, Pablo A; Muñoz, Ricardo; Vera, Eduardo

    2016-01-01

    We present the first results of the High cadence Transient Survey (HiTS), a survey whose objective is to detect and follow up optical transients with characteristic timescales from hours to days, especially the earliest hours of supernova (SN) explosions. HiTS uses the Dark Energy Camera (DECam) and a custom made pipeline for image subtraction, candidate filtering and candidate visualization, which runs in real-time to be able to react rapidly to the new transients. We discuss the survey design, the technical challenges associated with the real-time analysis of these large volumes of data and our first results. In our 2013, 2014 and 2015 campaigns we have detected more than 120 young SN candidates, but we did not find a clear signature from the short-lived SN shock breakouts (SBOs) originating after the core collapse of red supergiant stars, which was the initial science aim of this survey. Using the empirical distribution of limiting-magnitudes from our observational campaigns we measured the expected recove...

  13. SDSS-IV MaNGA IFS Galaxy Survey --- Survey Design, Execution, and Initial Data Quality

    CERN Document Server

    Yan, Renbin; Law, David R; Bershady, Matthew A; Andrews, Brett; Cherinka, Brian; Diamond-Stanic, Aleksandar M; Drory, Niv; MacDonald, Nicholas; Sánchez-Gallego, José R; Thomas, Daniel; Wake, David A; Weijmans, Anne-Marie; Westfall, Kyle B; Zhang, Kai; Aragón-Salamanca, Alfonso; Belfiore, Francesco; Bizyaev, Dmitry; Blanc, Guillermo A; Blanton, Michael R; Brownstein, Joel; Cappellari, Michele; D'Souza, Richard; Emsellem, Eric; Fu, Hai; Gaulme, Patrick; Graham, Mark T; Goddard, Daniel; Gunn, James E; Harding, Paul; Jones, Amy; Kinemuchi, Karen; Li, Cheng; Li, Hongyu; Maiolino, Roberto; Mao, Shude; Maraston, Claudia; Masters, Karen; Merrifield, Michael R; Oravetz, Daniel; Pan, Kaike; Parejko, John K; Sanchez, Sebastian F; Schlegel, David; Simmons, Audrey; Thanjavur, Karun; Tinker, Jeremy; Tremonti, Christy; Bosch, Remco van den; Zheng, Zheng

    2016-01-01

    The MaNGA Survey (Mapping Nearby Galaxies at Apache Point Observatory) is one of three core programs in the Sloan Digital Sky Survey IV. It is obtaining integral field spectroscopy (IFS) for 10K nearby galaxies at a spectral resolution of R~2000 from 3,622-10,354A. The design of the survey is driven by a set of science requirements on the precision of estimates of the following properties: star formation rate surface density, gas metallicity, stellar population age, metallicity, and abundance ratio, and their gradients; stellar and gas kinematics; and enclosed gravitational mass as a function of radius. We describe how these science requirements set the depth of the observations and dictate sample selection. The majority of targeted galaxies are selected to ensure uniform spatial coverage in units of effective radius (Re) while maximizing spatial resolution. About 2/3 of the sample is covered out to 1.5Re (Primary sample), and 1/3 of the sample is covered to 2.5Re (Secondary sample). We describe the survey ex...

  14. The opto-mechanical design for GMOX: a next-generation instrument concept for Gemini

    Science.gov (United States)

    Smee, Stephen A.; Barkhouser, Robert; Robberto, Massimo; Ninkov, Zoran; Gennaro, Mario; Heckman, Timothy M.

    2016-08-01

    We present the opto-mechanical design of GMOX, the Gemini Multi-Object eXtra-wide-band spectrograph, a potential next-generation (Gen-4 #3) facility-class instrument for Gemini. GMOX is a wide-band, multi-object, spectrograph with spectral coverage spanning 350 nm to 2.4 um with a nominal resolving power of R 5000. Through the use of Digital Micromirror Device (DMD) technology, GMOX will be able to acquire spectra from hundreds of sources simultaneously, offering unparalleled flexibility in target selection. Utilizing this technology, GMOX can rapidly adapt individual slits to either seeing-limited or diffraction-limited conditions. The optical design splits the bandpass into three arms, blue, red, and near infrared, with the near-infrared arm being split into three channels covering the Y+J band, H band, and K band. A slit viewing camera in each arm provides imaging capability for target acquisition and fast-feedback for adaptive optics control with either ALTAIR (Gemini North) or GeMS (Gemini South). Mounted at the Cassegrain focus, GMOX is a large (1.3 m x 2.8 m x 2.0 m) complex instrument, with six dichroics, three DMDs (one per arm), five science cameras, and three acquisition cameras. Roughly half of these optics, including one DMD, operate at cryogenic temperature. To maximize stiffness and simplify assembly and alignment, the opto-mechanics are divided into three main sub-assemblies, including a near-infrared cryostat, each having sub-benches to facilitate ease of alignment and testing of the optics. In this paper we present the conceptual opto-mechanical design of GMOX, with an emphasis on the mounting strategy for the optics and the thermal design details related to the near-infrared cryostat.

  15. Design of a large image derotator for the E-ELT instrument MICADO

    Science.gov (United States)

    Barboza, Santiago; Pott, Jörg-Uwe; Rohloff, Ralf-Rainer; Müller, Friedrich; Wagner, Jörg; Kärcher, Hans J.

    2016-08-01

    The Multi-AO Imaging Camera for Deep Observations (MICADO), a first light instrument for the 39 m European Extremely Large Telescope (E-ELT), is being designed and optimized to work with the Multi-Conjugate Adaptive Optics (MCAO) module MAORY (0.8-2.5 μm). The current concept of the MICADO instrument consists of a structural cryostat (2.1 m diameter and 2 m height) with the wavefront sensor (WFS) on top. The cryostat is mounted via its central flange with a direct interface to a large 2.5-m-diameter high-precision bearing, which rotates the entire camera (plus wavefront sensor) assembly to allow for image derotation without individually moving optical elements. The whole assembly is suspended at 3.6 m above the E-ELT Nasmyth platform by a Hexapod-type support structure. We describe the design of the MICADO derotator, a key mechanism that must precisely rotate the cryostat/SCAO-WFS assembly around its optical axis with an angular positioning accuracy better than 10 arcsec, in order to compensate the field rotation due to the alt-azimuth mount of the E-ELT. Special attention is being given to simulate the performance of the derotator during the design phase, in which both static and dynamics behaviors are being considered in parallel. The statics flexure analysis is done using a detailed Finite Element Model (FEM), while the dynamics simulation is being developed with the mathematical model of the derotator implemented in Matlab/Simulink. Finally, both aspects must be combined through a realistic end-to-end model. The experiment designed to prove the current concept of the MICADO derotator is also presented in this work.

  16. Design and development of a new cryosurgical instrument utilizing the Peltier thermoelectric effect.

    Science.gov (United States)

    Holman, M R; Rowland, S J

    1997-01-01

    Warts and some other dermatological conditions may be treated by the application of intense cold. This freezing has to be so severe as to form ice crystals which will rupture the cell membranes. The initial part of this project was to investigate the feasibility of using Peltier thermoelectric coolers (TECs) to cool down a suitable hand-held treatment tip to a temperature of approximately -50 degrees C. The results of these initial experiments showed how this could be accomplished and a prototype cryosurgical instrument, suitable for clinical trials, was designed and constructed. This new design is freestanding, self-contained and is operated from a standard 230 V mains supply. Unlike existing systems it does not use any disposable gases or liquids. A cryoprobe of this new design would allow reliable cryosurgery to be performed in a GP's treatment room where supplies of liquid nitrogen, nitrous oxide or carbon dioxide are not readily available. The design also has a built-in thermometer to measure the treatment tip temperature thus ensuring consistency in treatment. Clinical trials are being conducted at a number of GP practices to evaluate this new design.

  17. Integrated finite element analysis and raytracing oriented to structural optimization for astronomical instrument design

    Science.gov (United States)

    Riva, M.; De Caprio, V.; Spanó, P.; Tintori, M.

    2010-07-01

    The design of astronomical instrument is growing in dimension and complexity, following the new requirements imposed by ELT class telescopes. The availability of new structural material like composite ones is asking for more robust and reliable designing numerical tools. This paper wants to show a possible integrated design framework. The procedure starts from the developing of a raw structure consisting in an assembly of plates and beams directly from the optical design. The basic Finite Element Model is then prepared joining together plate and beam elements for the structure and mass and semi-rigid element for the the opto-mechanical subsystems. The technique developed is based onto Matlab® commands and run the FEA, extrapolate the optical displacements, implement them into the optical design and evaluates the image quality in terms of displacement and spot size. Thanks to a simplified procedure the routine is able to derive the full field of displacements from a reduced sequence of three different load sets. The automatic optimization routine modifies the properties of plates and beams considering also different materials and, in case of composites different lamination sequences. The algorithm is oriented to find the best compromise in terms of overall weights w.r.t. eigen-frequencies, image stability and quality.

  18. Proposing a survey instrument for measuring operational, formal, information and strategic Internet skills

    NARCIS (Netherlands)

    Deursen, van A.J.A.M.; Dijk, van J.A.G.M.; Peters, O.

    2012-01-01

    Observational studies prove to be very suitable to provide a realistic view of people's Internet skills. However, their cost and time are a strong limitation for large-scale data gathering. A useful addition to the measurement of Internet skills would be the development of survey questions for measu

  19. Design, analysis, and testing of kinematic mount for astronomical observation instrument used in space camera

    Science.gov (United States)

    An, Mingxin; Zhang, Lihao; Xu, Shuyan; Dong, Jihong

    2016-11-01

    A statically determinate kinematic mount structure is designed for an astronomical observation instrument. The basic principle of the proposed kinematic mount is introduced in detail, including the design principle, its structure, and its degrees of freedom. The compliance equations for the single-axis right circle flexure hinge are deduced, and mathematical models of the compliances of the bipod in the X-axis and Z-axis directions are established. Based on the index requirements, the range of one design parameter (the hinge groove depth, R) for the kinematic mount is determined. Parametric design is performed, with the entire structure being the design object and the first three eigenfrequencies as the design objective; the final design parameter for the kinematic mount is 1.9 mm. The first three eigenfrequencies of the final structure are 36.49 Hz, 38.65 Hz, and 72.41 Hz, which meet the frequency requirements. The Z-direction deformation and the bipod compliances in the X-axis and Z-axis directions are analyzed through simulations and experiments. The results show that (1) the Z-direction deformation of the bipod meets the displacement requirement; (2) the deviations between the finite element results and the compliance equation Cx results, and between the finite element results and the compliance equation Cz results are 8.8% and 3.92%, respectively; (3) the deviation between the experimental results and the compliance equation Cz results is 10.3%. It is concluded that the bipod compliance equations in the X-axis and Z-axis directions are valid, and that the kinematic mount thus meets the design requirements.

  20. The Calern Asteroid Polarimetric Survey using the Torino polarimeter: assessment of instrument performances and first scientific results

    Science.gov (United States)

    Devogèle, M.; Cellino, A.; Bagnulo, S.; Rivet, J. P.; Bendjoya, P.; Abe, L.; Pernechele, C.; Massone, G.; Vernet, D.; Tanga, P.; Dimur, C.

    2017-03-01

    A new polarimeter based on the wedged double Wollaston concept has been built at the Torino Observatory and installed on a 1-m telescope at the Calern observing station of the Observatoire de la Côte d'Azur, France. Its main purpose is to carry out a polarimetric survey of minor Solar system objects, which is called the Calern Asteroid Polarimetric Survey. In this paper, we describe the new Torino polarimeter and the results of preliminary scientific validation tests. A number of standard stars with known polarization states, as well as a number of asteroids for which the polarimetric properties are known, have been observed in order to assess the instrument's accuracy. The instrumental polarization has been found to be stable within a few 10-4 units. A total of 124 new polarimetric observation of 78 asteroids are presented. In the case of asteroids already observed in the past, the new data are in agreement with available phase-polarization curves with error bars smaller than most previously published data. We also present data for 21 asteroids that have never been observed before in polarimetry.

  1. Organized Autotelescopes for Serendipitous Event Survey (OASES): Design and performance

    Science.gov (United States)

    Arimatsu, Ko; Tsumura, Kohji; Ichikawa, Kohei; Usui, Fumihiko; Ootsubo, Takafumi; Kotani, Takayuki; Sarugaku, Yuki; Wada, Takehiko; Nagase, Koichi; Watanabe, Jun-ichi

    2017-08-01

    Organized Autotelescopes for Serendipitous Event Survey (OASES) is an optical observation project that aims to detect and investigate stellar occultation events by kilometer-sized trans-Neptunian objects (TNOs). In this project, multiple low-cost observation systems for wide-field and high-speed photometry were developed in order to detect rare and short-timescale stellar occultation events. The observation system consists of commercial off-the-shelf 0.28 m aperture f/1.58 optics providing a 2.3 × 1.8° field of view. A commercial CMOS camera is coupled to the optics to obtain full-frame imaging with a frame rate greater than 10 Hz. As of 2016 September, this project exploits two observation systems, which are installed on Miyako Island, Okinawa, Japan. Recent improvements in CMOS technology in terms of high-speed imaging and low readout noise mean that the observation systems are capable of monitoring ∼2000 stars in the Galactic plane simultaneously with magnitudes down to V ∼ 13.0, providing ∼20% photometric precision in light curves with a sampling cadence of 15.4 Hz. This number of monitored stars is larger than for any other existing instruments for coordinated occultation surveys. In addition, a precise time synchronization method needed for simultaneous occultation detection is developed using faint meteors. The two OASES observation systems are executing coordinated monitoring observations of a dense stellar field in order to detect occultations by kilometer-sized TNOs for the first time.

  2. The Large Synoptic Survey Telescope concept design overview

    Science.gov (United States)

    Krabbendam, Victor L.

    2008-07-01

    The Large Synoptic Survey Telescope Project is a public-private partnership that has successfully completed the Concept Design of its wide-field ground based survey system and started several long-lead construction activities using private funding. The telescope has a 3-mirror wide field optical system with an 8.4 meter primary, 3.4 meter secondary, and 5 meter tertiary mirror. The reflective optics feed three refractive elements and a 64 cm 3.2 gigapixel camera. The telescope will be located on the summit of Cerro Pachón in Chile. The LSST data management system will reduce, transport, alert, archive the roughly 15 terabytes of data produced nightly, and will serve the raw and catalog data accumulating at an average of 7 petabytes per year to the community without any proprietary period. This survey will yield contiguous overlapping imaging of 20,000 square degrees of sky in 6 optical filter bands covering wavelengths from 320 to 1080nm. The project continues to attract institutional partners and has acquired non-federal funding sufficient to construct the primary mirror, already in progress at the University of Arizona, and fund detector prototype efforts, two of the longest lead items in the LSST. The project has submitted a proposal for construction to the National Science Foundation Major Research Equipment and Facilities Construction (MREFC) program and is preparing for a 2011 funding authorization.

  3. Survey of Hospitals and Manufacturers of Biomedical Instrumentation Concerning Variables Related to the Development and Implementation of a Bio-Med Instrumentation Technologist Curriculum.

    Science.gov (United States)

    Schaumberg, Gary F.

    The Bio-Med Instrumentation Technologist Questionnaire was sent to 105 hospitals in the Southern California area that had electronic instrumentation for patient monitoring purposes. Sixty completed questionnaires were returned. Twenty manufacturers of bio-medical instrumentation were sent the questionnaires and seven responded. Some of the…

  4. Development and testing of a survey instrument to measure benefits of a nursing information system.

    Science.gov (United States)

    Abdrbo, Amany A; Zauszniewski, Jaclene A; Hudak, Christine A; Anthony, Mary K

    2011-01-01

    Information systems (IS) benefits for nurses are outcomes related to the tangible products or improvements that nurses realize from using IS. This study examined the development and psychometric testing of a measure of nurses' benefits from IS. A random sample of 570 nurses working in hospitals, providing direct patient care, and using IS completed the study questionnaire. The internal consistency reliability of the results was .97. Exploratory factor analysis, using principal components extraction and varimax rotation, revealed items loaded on four factors (saving time and efficiency, quality of care, charting, and professional practice) that were confirmed by confirmatory factor analysis. Continued refinement of the instrument is needed with more diverse samples of nurses.

  5. Trends in caesarean section and instrumental deliveries in relation to Body Mass Index: a clinical survey during 1978 - 2001

    Directory of Open Access Journals (Sweden)

    Josefsson Ann

    2010-07-01

    Full Text Available Abstract Background During the last 20 years the rate of CS has increased in Sweden as it has in many other countries. The proportion of pregnant women suffering from a high BMI has also increased rapidly during the same time period. It would therefore be of interest to study both how and if these two observations are related to each other. The aim was therefore to study trends in mode of caesarean section (CS and instrumental deliveries among women in three BMI groups over a time span of almost 25 years with special focus on the observed body weight of pregnant women. Method The design is a retrospective cohort study using medical records of consecutively delivered women at two delivery wards in South East Sweden during the years 1978, 1986, 1992, 1997 and 2001. Results No significant time-trends were found for CS and instrumental delivery within each BMI-group for the time period studied. The proportion of women with BMI ≥ 25 delivered by means of CS or instrumental delivery increased quite dramatically from 1978 to 2001 (χ2 test for trend; p Conclusion Overweight and obese pregnant women constitute a rapidly growing proportion of the total number of CS and instrumental deliveries. Planning and allocation of health resources must be adjusted to this fact and its implications.

  6. The Large Synoptic Survey Telescope preliminary design overview

    Science.gov (United States)

    Krabbendam, V. L.; Sweeney, D.

    2010-07-01

    The Large Synoptic Survey Telescope (LSST) Project is a public-private partnership that is well into the design and development of the complete observatory system to conduct a wide fast deep survey and to process and serve the data. The telescope has a 3-mirror wide field optical system with an 8.4 meter primary, 3.4 meter secondary, and 5 meter tertiary mirror. The reflective optics feed three refractive elements and a 64 cm 3.2 gigapixel camera. The LSST data management system will reduce, transport, alert and archive the roughly 15 terabytes of data produced nightly, and will serve the raw and catalog data accumulating at an average of 7 petabytes per year to the community without any proprietary period. The project has completed several data challenges designed to prototype and test the data management system to significant pre-construction levels. The project continues to attract institutional partners and has acquired non-federal funding sufficient to construct the primary mirror, already in progress at the University of Arizona, build the secondary mirror substrate, completed by Corning, and fund detector prototype efforts, several that have been tested on the sky. A focus of the project is systems engineering, risk reduction through prototyping and major efforts in image simulation and operation simulations. The project has submitted a proposal for construction to the National Science Foundation Major Research Equipment and Facilities Construction (MREFC) program and has prepared project advocacy papers for the National Research Council's Astronomy 2010 Decadal Survey. The project is preparing for a 2012 construction funding authorization.

  7. Development of a respiratory protection survey instrument for occupational health nurses: an educational project.

    Science.gov (United States)

    Taormina, Deborah; Burgel, Barbara J

    2013-02-01

    The Institute of Medicine (2011) report Occupational Health Nurses and Respiratory Protection: Improving Education and Training outlined seven recommendations to improve the competency of occupational health nurses in respiratory protection. An advisory group was convened in December 2011, with stakeholder representation from the Centers for Disease Control and Prevention/National Institute for Occupational Safety and Health/National Personal Protective Technology Laboratory, American Association of Occupational Health Nurses, Inc., American Board for Occupational Health Nurses, Inc., Association of Occupational Health Professionals in Healthcare, American Nurses Association, and Institute of Medicine Standing Committee on Personal Protective Equipment for Workplace Safety and Health. The initial work of the advisory group included developing and administering a survey to assess current occupational health nurse roles and responsibilities relevant to respiratory protection. Development of the survey was led by a master's student and advisor who worked with the advisory group. The process of tool development and preliminary findings are presented in this article.

  8. A Survey of Commercially Available Chemical Agent Instrumentation for Use in the Field

    Energy Technology Data Exchange (ETDEWEB)

    Haas, J S; Alcaraz, A; Andresen, B D; Pruneda, C O

    2002-03-01

    Lawrence Livermore National Laboratory's (LLNL) Forensic Science Center (FSC) has extensive experience and capabilities in the analysis of chemical agents (CA) and related compounds as well as experience in identifying these materials in the field (i.e. samples such as those found in soils, liquids, gases). An open source survey was performed to determine viable, commercially available technology that can detect, in situ, CA and also meet field-use performance criteria as specified by the Program Management Consultant (PMC). The performance requirements of the technology include accuracy, reliability, integration onto robotics, and chemical detection sensitivities that meet required specifications. Not included in this survey are technologies and methodologies to detect CA decomposition products and related waste streams.

  9. NEW INSTRUMENTS FOR SURVEY: ON LINE SOFTWARES FOR 3D RECONTRUCTION FROM IMAGES

    OpenAIRE

    E. Fratus de Balestrini; Guerra, F.

    2012-01-01

    3d scanning technologies had a significant development and have been widely used in documentation of cultural, architectural and archeological heritages. Modern methods of three-dimensional acquiring and modeling allow to represent an object through a digital model that combines visual potentialities of images (normally used for documentation) to the accuracy of the survey, becoming at the same time support for the visualization that for metric evaluation of any artefact that have an historic...

  10. Measuring stigma among abortion providers: assessing the Abortion Provider Stigma Survey instrument.

    Science.gov (United States)

    Martin, Lisa A; Debbink, Michelle; Hassinger, Jane; Youatt, Emily; Eagen-Torkko, Meghan; Harris, Lisa H

    2014-01-01

    We explored the psychometric properties of 15 survey questions that assessed abortion providers' perceptions of stigma and its impact on providers' professional and personal lives referred to as the Abortion Provider Stigma Survey (APSS). We administered the survey to a sample of abortion providers recruited for the Providers' Share Workshop (N = 55). We then completed analyses using Stata SE/12.0. Exploratory factor analysis, which resulted in 13 retained items and identified three subscales: disclosure management, resistance and resilience, and discrimination. Stigma was salient in abortion provider's lives: they identified difficulties surrounding disclosure (66%) and felt unappreciated by society (89%). Simultaneously, workers felt they made a positive contribution to society (92%) and took pride in their work (98%). Paired t-test analyses of the pre- and post-Workshop APSS scores showed no changes in the total score. However, the Disclosure Management subscale scores were significantly lower (indicating decreased stigma) for two subgroups of participants: those over the age of 30 and those with children. This analysis is a promising first step in the development of a quantitative tool for capturing abortion providers' experiences of and responses to pervasive abortion stigma.

  11. A LEKID-based CMB instrument design for large-scale observations in Greenland

    Science.gov (United States)

    Araujo, D. C.; Ade, P. A. R.; Bond, J. R.; Bradford, K. J.; Chapman, D.; Che, G.; Day, P. K.; Didier, J.; Doyle, S.; Eriksen, H. K.; Flanigan, D.; Groppi, C. E.; Hillbrand, Seth N.; Johnson, B. R.; Jones, G.; Limon, Michele; Miller, A. D.; Mauskopf, P.; McCarrick, H.; Mroczkowski, T.; Reichborn-Kjennerud, B.; Smiley, B.; Sobrin, Joshua; Wehus, I. K.; Zmuidzinas, J.

    2014-08-01

    We present the results of a feasibility study, which examined deployment of a ground-based millimeter-wave polarimeter, tailored for observing the cosmic microwave background (CMB), to Isi Station in Greenland. The instrument for this study is based on lumped-element kinetic inductance detectors (LEKIDs) and an F/2.4 catoptric, crossed-Dragone telescope with a 500 mm aperture. The telescope is mounted inside the receiver and cooled to Linearly polarized signals from the sky are modulated with a metal-mesh half-wave plate that is rotated at the aperture stop of the telescope with a hollow-shaft motor based on a superconducting magnetic bearing. The modular detector array design includes at least 2300 LEKIDs, and it can be configured for spectral bands centered on 150 GHz or greater. Our study considered configurations for observing in spectral bands centered on 150, 210 and 267 GHz. The entire polarimeter is mounted on a commercial precision rotary air bearing, which allows fast azimuth scan speeds with negligible vibration and mechanical wear over time. A slip ring provides power to the instrument, enabling circular scans (360 degrees of continuous rotation). This mount, when combined with sky rotation and the latitude of the observation site, produces a hypotrochoid scan pattern, which yields excellent cross-linking and enables 34% of the sky to be observed using a range of constant elevation scans. This scan pattern and sky coverage combined with the beam size (15 arcmin at 150 GHz) makes the instrument sensitive to 5 < ` < 1000 in the angular power spectra.

  12. Design, implementation, and demographic differences of HEAL: a self-report health care leadership instrument

    Directory of Open Access Journals (Sweden)

    Murphy KR

    2016-10-01

    Full Text Available Kelly R Murphy, John E McManigle, Benjamin M Wildman-Tobriner, Amy Little Jones, Travis J Dekker, Barrett A Little, Joseph P Doty, Dean C Taylor Duke Healthcare Leadership Program, Duke University School of Medicine, Durham, NC, USA Abstract: The medical community has recognized the importance of leadership skills among its members. While numerous leadership assessment tools exist at present, few are specifically tailored to the unique health care environment. The study team designed a 24-item survey (Healthcare Evaluation & Assessment of Leadership [HEAL] to measure leadership competency based on the core competencies and core principles of the Duke Healthcare Leadership Model. A novel digital platform was created for use on handheld devices to facilitate its distribution and completion. This pilot phase involved 126 health care professionals self-assessing their leadership abilities. The study aimed to determine both the content validity of the survey and the feasibility of its implementation and use. The digital platform for survey implementation was easy to complete, and there were no technical problems with survey use or data collection. With regard to reliability, initial survey results revealed that each core leadership tenet met or exceeded the reliability cutoff of 0.7. In self-assessment of leadership, women scored themselves higher than men in questions related to patient centeredness (P=0.016. When stratified by age, younger providers rated themselves lower with regard to emotional intelligence and integrity. There were no differences in self-assessment when stratified by medical specialty. While only a pilot study, initial data suggest that HEAL is a reliable and easy-to-administer survey for health care leadership assessment. Differences in responses by sex and age with respect to patient centeredness, integrity, and emotional intelligence raise questions about how providers view themselves amid complex medical teams. As the

  13. Reliability analysis of instrument design of noninvasive bone marrow disease detector

    Science.gov (United States)

    Su, Yu; Li, Ting; Sun, Yunlong

    2016-02-01

    Bone marrow is an important hematopoietic organ, and bone marrow lesions (BMLs) may cause a variety of complications with high death rate and short survival time. Early detection and follow up care are particularly important. But the current diagnosis methods rely on bone marrow biopsy/puncture, with significant limitations such as invasion, complex operation, high risk, and discontinuous. It is highly in need of a non-invasive, safe, easily operated, and continuous monitoring technology. So we proposed to design a device aimed for detecting bone marrow lesions, which was based on near infrared spectrum technology. Then we fully tested its reliabilities, including the sensitivity, specificity, signal-to-noise ratio (SNR), stability, and etc. Here, we reported this sequence of reliability test experiments, the experimental results, and the following data analysis. This instrument was shown to be very sensitive, with distinguishable concentration less than 0.002 and with good linearity, stability and high SNR. Finally, these reliability-test data supported the promising clinical diagnosis and surgery guidance of our novel instrument in detection of BMLs.

  14. A novel automated instrument designed to determine photosensitivity thresholds (Conference Presentation)

    Science.gov (United States)

    Aguilar, Mariela C.; Gonzalez, Alex; Rowaan, Cornelis; De Freitas, Carolina; Rosa, Potyra R.; Alawa, Karam; Lam, Byron L.; Parel, Jean-Marie A.

    2016-03-01

    As there is no clinically available instrument to systematically and reliably determine the photosensitivity thresholds of patients with dry eyes, blepharospasms, migraines, traumatic brain injuries, and genetic disorders such as Achromatopsia, retinitis pigmentosa and other retinal dysfunctions, a computer-controlled optoelectronics system was designed. The BPEI Photosensitivity System provides a light stimuli emitted from a bi-cupola concave, 210 white LED array with varying intensity ranging from 1 to 32,000 lux. The system can either utilize a normal or an enhanced testing mode for subjects with low light tolerance. The automated instrument adjusts the intensity of each light stimulus. The subject is instructed to indicate discomfort by pressing a hand-held button. Reliability of the responses is tracked during the test. The photosensitivity threshold is then calculated after 10 response reversals. In a preliminary study, we demonstrated that subjects suffering from Achromatopsia experienced lower photosensitivity thresholds than normal subjects. Hence, the system can safely and reliably determine the photosensitivity thresholds of healthy and light sensitive subjects by detecting and quantifying the individual differences. Future studies will be performed with this system to determine the photosensitivity threshold differences between normal subjects and subjects suffering from other conditions that affect light sensitivity.

  15. Stray light in PICARD SODISM instrument: design, check, flight results, and alignment issues

    Science.gov (United States)

    Etcheto, P.; Meftah, M.; Meissonnier, M.; Irbah, A.; Assus, P.; Thuillier, G.

    2011-10-01

    The PICARD satellite is dedicated to the monitoring of solar activity. It carries several imaging and radiometric instruments. One of them, SODISM, is a high-resolution radio-imaging telescope measuring the Sun diameter and total flux in near UV and visible wavelengths. Along with mirrors, SODISM includes highly reflective filters and attenuators, which generate ghost images. These disturb the Sun edge area, the total flux measurement and also the fine aiming channel. This is compounded with tilt tolerances, which shift and modify the ghosts images. Stray light was studied through ASAP simulation, with broad sources and high order splits. Each path was studied separately, checking its effect on instrument performance and the possible effect of tilts. Some design improvements allowed to reduce the most critical paths, while others, although relatively intense, stood clear from the critical areas. However ground tests and flight results show some residual ghosts, which could not be fully suppressed due to mechanical tolerances. They shall be taken into account by image processing.

  16. The Systematic Evaluation of Instruments Designed to Assess Pain in Persons with Limited Ability to Communicate*

    Directory of Open Access Journals (Sweden)

    Michèle Aubin

    2007-01-01

    Full Text Available Chronic pain is often underdetected and undertreated in long-term care facilities. The use of self-report measures of pain (such as the visual analogue scale is often problematic for older adults residing in long-term care because of the high prevalence of visual and auditory deficits and severe cognitive impairment. Observational measures of pain have been developed to address this concern. A systematic grid designed to assess the properties of existing observational measures of pain was used for seniors with dementia. The grid focused on the evaluation of content validity (12 items, construct validity (12 items, reliability (13 items and clinical utility (10 items. Among the 24 instruments that were evaluated, several were deemed to be promising in the assessment of pain among older persons with severe dementia. Nonetheless, additional research is needed before their routine integration in the practices of long-term care settings.

  17. Transmutation of singularities and zeros in graded index optical instruments: a methodology for designing practical devices.

    Science.gov (United States)

    Hooper, I R; Philbin, T G

    2013-12-30

    We describe a design methodology for modifying the refractive index profile of graded-index optical instruments that incorporate singularities or zeros in their refractive index. The process maintains the device performance whilst resulting in graded profiles that are all-dielectric, do not require materials with unrealistic values, and that are impedance matched to the bounding medium. This is achieved by transmuting the singularities (or zeros) using the formalism of transformation optics, but with an additional boundary condition requiring the gradient of the co-ordinate transformation be continuous. This additional boundary condition ensures that the device is impedance matched to the bounding medium when the spatially varying permittivity and permeability profiles are scaled to realizable values. We demonstrate the method in some detail for an Eaton lens, before describing the profiles for an "invisible disc" and "multipole" lenses.

  18. Transmutation of singularities and zeros in graded index optical instruments: a methodology for designing practical devices

    CERN Document Server

    Hooper, I R

    2014-01-01

    We describe a design methodology for modifying the refractive index profile of graded-index optical instruments that incorporate singularities or zeros in their refractive index. The process maintains the device performance whilst resulting in graded profiles that are all-dielectric, do not require materials with unrealistic values, and that are impedance matched to the bounding medium. This is achieved by transmuting the singularities (or zeros) using the formalism of transformation optics, but with an additional boundary condition requiring the gradient of the co- ordinate transformation be continuous. This additional boundary condition ensures that the device is impedance matched to the bounding medium when the spatially varying permittivity and permeability profiles are scaled to realizable values. We demonstrate the method in some detail for an Eaton lens, before describing the profiles for an "invisible disc" and "multipole" lenses.

  19. The Quality Evaluation Method of Instrument Flight Procedure Design Scheme Based on Fuzzy Linguistic Assessments

    Directory of Open Access Journals (Sweden)

    Chen Ken

    2013-07-01

    Full Text Available The quality of Instrument Flight Procedure Design Scheme (QIFPDS is directly related to the terminal area airspace capacity, quality, efficiency of air traffic management, and even the safety of aircraft. Hence, the evaluation of QIFPDS has great significance in real life. However, the evaluation of QIFPDS in real work is mainly done by experts through their specific knowledge and experience, which usually leads to a bias result and inevitably contains subjectivity and arbitrary defects. In this paper, a multi-attribute group decision-making method is proposed. This method makes full use of evaluation information; objectively and effectively evaluate QIFPDS. Also in this paper, a mathematical model for this method is introduced and a detailed step to solve this model is listed. At the end of this paper, an example is given to show the effectiveness and feasibility of the method.  

  20. Design and Field Implementation of Auto Tuned Virtual Instrumentation Corrosion Controller

    Science.gov (United States)

    Gopalakrishnan, J.; Agnihotri, Ganga; Deshpande, D. M.

    2016-06-01

    Corrosion in underground metallic pipeline leads to leakage which is hazardous when oil/natural gas is transported. Rate of corrosion in metal pipeline can be controlled by impressing dc current to the gas pipeline and thereby making metal pipeline to act as cathode of corrosion cell. Proportional integral controllers are used in impressed current cathodic protection application; tuning of proportional and integral constants of these controllers requires expertise. Step open, step close and relay tuning methods are compared; relay tuning provided better results for cathodic protection application. Ziegler-Nichols tuning formulas are used to select tuning parameters based on loop response. Virtual instrumentation is used for design, development, testing and field implementation of auto tuned PI controller. Proposed auto tuned proportional integral impressed current cathodic protection controller precisely controls corrosion in pipeline by selecting optimum proportional and integral constants. Controller effectiveness is cross verified using electrical resistance probe.

  1. Conceptual Design of the Top Mounted In-core Instrumentation for APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Taehyun; Bae, Jaehyun; Kim, Jongmin; Maeng, Cheolsoo; Kim, Hyunmin; Lee, Daehee [KEPCO Engineering and Construction, Daejeon (Korea, Republic of)

    2015-10-15

    Safety issue for nuclear power plant is reviewed. One of the main issue is Top Mounted In-core Instrumentation (TM-ICI). TM-ICI has the advantage of the structural integrity on the reactor bottom head during severe accident. This research about adopting the TM-ICI for APR1400 has been performed to have this advantage. Designing the nuclear power plant, safety issue is very important, and TM-ICI is one of the main issue. For the research of the TM-ICI, APR1400 has been reviewed for possibility of the TM-ICI and the results are as follows: The ICI nozzle head penetration shall be located outside of the CEDM nozzles and Two types of CEAs shall be unified into one type.

  2. Design and Testing of a Wireless Demonstrator for Large Instrumentation Systems

    CERN Document Server

    Sahoo, H; Djurcic, Z; Drake, G; Hashemian, R; Kreps, A; Oberling, M; Pearson, T

    2013-01-01

    In this proceeding, we report the development of a wireless demonstrator intended to readout instrumentation systems having thousands of channels. A data acquisition system was designed and tested based on compliant implementation of 802.11n based hardware and protocols. This project is for large detectors containing photomultiplier tubes. Both free-space optical and radio frequency techniques were tested for wireless power transfer. The front-end circuitry, including a high-voltage power supply was powered wirelessly, thus creating an all-wireless detector readout. The system was successfully tested as a single detector module, which was powered wirelessly and transmitted data wirelessly. The performance of the prototype system and how a large scale implementation of the system might be realized are described in this proceeding.

  3. An automated calibration laboratory for flight research instrumentation: Requirements and a proposed design approach

    Science.gov (United States)

    Oneill-Rood, Nora; Glover, Richard D.

    1990-01-01

    NASA's Dryden Flight Research Facility (Ames-Dryden), operates a diverse fleet of research aircraft which are heavily instrumented to provide both real time data for in-flight monitoring and recorded data for postflight analysis. Ames-Dryden's existing automated calibration (AUTOCAL) laboratory is a computerized facility which tests aircraft sensors to certify accuracy for anticipated harsh flight environments. Recently, a major AUTOCAL lab upgrade was initiated; the goal of this modernization is to enhance productivity and improve configuration management for both software and test data. The new system will have multiple testing stations employing distributed processing linked by a local area network to a centralized database. The baseline requirements for the new AUTOCAL lab and the design approach being taken for its mechanization are described.

  4. A precision cryostat design for manual and semi-automated cryo-plunge instruments

    Science.gov (United States)

    Russo, Christopher J.; Scotcher, Steve; Kyte, Martin

    2016-11-01

    Here we describe a bench-top cryostat system to control the temperature of liquid ethane in a cryo-plunge apparatus designed for biological specimen preparation for electron cryomicroscopy. It comprises a foam insulated Dewar containing a copper cryostat cup, whose temperature is controlled via an active feedback system to within 0.1 K. The device can easily be incorporated into existing manual and semi-automatic cryo-plunge instruments that are not equipped with cryogenic temperature control. Over the course of normal use, we find that using a cryostat is convenient, fast, and does not require special mixtures of cryogens like ethane/propane. This simple cryostat improves the reliability and reproducibility of biological specimen preparation for electron cryomicroscopy.

  5. Design and Field Implementation of Auto Tuned Virtual Instrumentation Corrosion Controller

    Science.gov (United States)

    Gopalakrishnan, J.; Agnihotri, Ganga; Deshpande, D. M.

    2017-02-01

    Corrosion in underground metallic pipeline leads to leakage which is hazardous when oil/natural gas is transported. Rate of corrosion in metal pipeline can be controlled by impressing dc current to the gas pipeline and thereby making metal pipeline to act as cathode of corrosion cell. Proportional integral controllers are used in impressed current cathodic protection application; tuning of proportional and integral constants of these controllers requires expertise. Step open, step close and relay tuning methods are compared; relay tuning provided better results for cathodic protection application. Ziegler-Nichols tuning formulas are used to select tuning parameters based on loop response. Virtual instrumentation is used for design, development, testing and field implementation of auto tuned PI controller. Proposed auto tuned proportional integral impressed current cathodic protection controller precisely controls corrosion in pipeline by selecting optimum proportional and integral constants. Controller effectiveness is cross verified using electrical resistance probe.

  6. The 2003 Australian Breast Health Survey: survey design and preliminary results

    Directory of Open Access Journals (Sweden)

    Favelle Simone

    2008-01-01

    Full Text Available Abstract Background The Breast Health Surveys, conducted by the National Breast Cancer Centre (NBCC in 1996 and 2003, are designed to gain insight into the knowledge, attitudes and behaviours of a nationally representative sample of Australian women on issues relevant to breast cancer. In this article, we focus on major aspects of the design and present results on respondents' knowledge about mammographic screening. Methods The 2003 BHS surveyed English-speaking Australian women aged 30–69 without a history of breast cancer using computer-assisted telephone interviewing. Questions covered the following themes: knowledge and perceptions about incidence, mortality and risk; knowledge and behaviour regarding early detection, symptoms and diagnosis; mammographic screening; treatment; and accessibility and availability of information and services. Respondents were selected using a complex sample design involving stratification. Sample weights against Australian population benchmarks were used in all statistical analyses. Means and proportions for the entire population and by age group and area of residence were calculated. Statistical tests were conducted using a level of significance of 0.01. Results Of the 3,144 respondents who consented to being interviewed, 138 (4.4% had a previous diagnosis of breast cancer and were excluded leaving 3,006 completed interviews eligible for analysis. A majority of respondents (61.1% reported ever having had a mammogram and 29.1% identified mammography as being the best way of finding breast cancer. A majority of women (85.9% had heard of the BreastScreen Australia (BSA program, the national mammographic screening program providing free biennial screening mammograms, with 94.5% believing that BSA attendance was available regardless of the presence or absence of symptoms. There have been substantial gains in women's knowledge about mammographic screening over the seven years between the two surveys. Conclusion The

  7. The Effect of Femoral Cutting Guide Design Improvements for Patient-Specific Instruments

    Directory of Open Access Journals (Sweden)

    Oh-Ryong Kwon

    2015-01-01

    Full Text Available Although the application of patient-specific instruments (PSI for total knee arthroplasty (TKA increases the cost of the surgical procedure, PSI may reduce operative time and improve implant alignment, which could reduce the number of revision surgeries. We report our experience with TKA using PSI techniques in 120 patients from March to December 2014. PSI for TKA were created from data provided by computed tomography (CT scans or magnetic resonance imaging (MRI; which imaging technology is more reliable for the PSI technique remains unclear. In the first 20 patients, the accuracy of bone resection and PSI stability were compared between CT and MRI scans with presurgical results as a reference; MRI produced better results. In the second and third groups, each with 50 patients, the results of bone resection and stability were compared in MRI scans with respect to the quality of scanning due to motion artifacts and experienced know-how in PSI design, respectively. The optimized femoral cutting guide design for PSI showed the closest outcomes in bone resection and PSI stability with presurgical data. It is expected that this design could be a reasonable guideline in PSI.

  8. The optical design of GMOX: a next-generation instrument concept for Gemini

    Science.gov (United States)

    Barkhouser, Robert; Robberto, Massimo; Smee, Stephen A.; Ninkov, Zoran; Gennaro, Mario; Heckman, Timothy

    2016-08-01

    We present the optical design of GMOX, the Gemini Multi-Object eXtra-wide-band spectrograph. GMOX was selected as part of the Gemini Instrument Feasibility Study to develop capabilities and requirements for the next facility instrument (Gen4#3) for the observatory. We envision GMOX covering the entire optical/near-IR wavelength range accessible from the ground, from 3500 Å in the U band up to 2.4 μm in the K band, with nominal resolving power R≃5,000. To maximize efficiency, the bandpass is split into three spectrograph arms - blue, red, and near-infrared - with the near-infrared arm further split into three channels covering the Y+J, H, and K bands. At the heart of each arm is a Digital Micromirror Device (DMD) serving as a programmable slit array. This technology will enable GMOX to simultaneously acquire hundreds of spectra of faint sources in crowded fields with unparalleled spatial resolution, optimally adapting to both seeing-limited and diffraction limited conditions provided by ALTAIR and GeMS at Gemini North and South, respectively. Fed by GeMS at f/33, GMOX can synthesize slits as small as 40 mas (corresponding to a single HST/WFC3 CCD pixel) over its entire 85"x45" field of view. With either ALTAIR or the native telescope focal ratio of f/16, both the slit and field sizes double. In this paper we discuss the conceptual optical design of GMOX including, for each arm: the pre-slit optics, DMD slit array, off-axis Schmidt collimator, VPH grating, and refractive spectrograph and slit-viewing cameras.

  9. Probability sampling design in ethnobotanical surveys of medicinal plants

    Directory of Open Access Journals (Sweden)

    Mariano Martinez Espinosa

    2012-12-01

    Full Text Available Non-probability sampling design can be used in ethnobotanical surveys of medicinal plants. However, this method does not allow statistical inferences to be made from the data generated. The aim of this paper is to present a probability sampling design that is applicable in ethnobotanical studies of medicinal plants. The sampling design employed in the research titled "Ethnobotanical knowledge of medicinal plants used by traditional communities of Nossa Senhora Aparecida do Chumbo district (NSACD, Poconé, Mato Grosso, Brazil" was used as a case study. Probability sampling methods (simple random and stratified sampling were used in this study. In order to determine the sample size, the following data were considered: population size (N of 1179 families; confidence coefficient, 95%; sample error (d, 0.05; and a proportion (p, 0.5. The application of this sampling method resulted in a sample size (n of at least 290 families in the district. The present study concludes that probability sampling methods necessarily have to be employed in ethnobotanical studies of medicinal plants, particularly where statistical inferences have to be made using data obtained. This can be achieved by applying different existing probability sampling methods, or better still, a combination of such methods.

  10. The Brazilian Amazon Region Eye Survey: Design and Methods.

    Science.gov (United States)

    Salomão, Solange R; Furtado, João Marcello; Berezovsky, Adriana; Cavascan, Nívea N; Ferraz, Alberto N; Cohen, Jacob M; Muñoz, Sergio; Belfort, Rubens

    2017-08-01

    To describe the study design, operational strategies, procedures, and baseline characteristics of the Brazilian Amazon Region Eye Survey (BARES), a population-based survey of the prevalence and causes of distance and near visual impairment and blindness in older adults residing in the city of Parintins. Cluster sampling, based on geographically defined census sectors, was used for cross-sectional random sampling of persons 45 years and older from urban and rural areas. Subjects were enumerated through a door-to-door survey and invited for measurement of uncorrected, presenting and best-corrected visual acuity and an ocular examination. Of 9931 residents (5878 urban and 4053 rural), 2384 individuals (1410 urban and 974 rural) were eligible and 2041 (1180 urban and 861 rural) had a clinical examination (response rate 85.6%). The majority of participants were female (1041, 51.0%); the average age was 59.9 ± 11.1 years (60.2 ± 11.2 years for urban and 59.4 ± 11.1 years for rural); 1360 (66.6%) had primary schooling or less (58.1% in urban and 78.4% in rural) and 57.8% were resident in urban areas. The age distribution between sexes was similar (p = 0.178). Both sex and age distributions of the sample were comparable to that of the Brazilian Amazon Region population. The BARES cohort will provide information about the prevalence and causes of near and distance vision in this underprivileged and remote population in Brazil.

  11. Design of High-speed Wear Lifetime Tester of the Instrument Ball Bearings

    Science.gov (United States)

    Liu, C. H.; Gu, J. M.; Sun, Y.; Chen, X. Y.

    2006-10-01

    The instrument ball bearings are the key components of movable components for various kinds of measuring and control instruments; they often operate in the environmental condition of high-speed and light preload. In general, the non metal, disposable oilimpregnated retainer material has been used for these kinds of high precision miniature bearing. The engineering practice shows that the common failure mode of them is the wear which appears under the condition of insufficient lubrication condition. As the results, the vibration and noise will be enlarged, so does the frictional torque, which makes the ball bearings to lose its original working accuracy. It is the lifetime test of bearings that can enable the designers and manufacturers to chose the material of the bearing properly, optimize the product structure, mend the manufacturing technique process, and to enhance the technical level of the bearing products significantly. In this paper, the wear lifetime tester has been designed according to the requirements of the life test for the instrument ball bearings, which consists of the main body of tester, electric system, drive unit and computer measure and control system, etc. The motor spindle has been selected to drive the device which is supported by the aerostatic bearing; frequency conversion speed adjustment mode, its scope of rotating speed is between 0 and 10,000 rpm. A pair of bearings can be tested under the pure axial preload condition, the maximum load is up to 50N, the control accuracy is ±2% the scope of temperature control is up to 200°C. The variation of frictional torque on the bearing couple will be measured by an online torque transducer. The variation of power dissipation can be monitored under arbitrary speed by use of an on-line high-precision power meter. The wear and quality situation of the contact surface of the bearings will be reflected on these two parameters. Meanwhile, the values of temperature and vibration will also be monitored

  12. Lessons Learned from GOSAT; Instrument Design, Calibration, Operation, Data Processing, and International Collaboration

    Science.gov (United States)

    Kuze, A.; Suto, H.; Shiomi, K.; Nakajima, M.

    2012-12-01

    Advantage of satellite observation is its ability to monitor long term and global distribution with a single instrument. Ozone observation from space has been successful for long term monitoring purposes. Monitoring gradual increase and distribution of greenhouse gases in the troposphere with sub-percent accuracy has become a challenging subject. Interference of cloud and aerosol in radiative transfer has to be corrected for troposphere measurement. Accurate O2-A band measurement can retrieve surface pressure and aerosol distribution property. We have selected a Fourier Transform spectrometer (FTS) to achieve high throughput and wide spectral coverage with uniform spectral resolution. On the other hand, it is difficult to modulate short wave such as 0.76μm and avoid micro vibration interference. Prelaunch, we took special care to select optical components of excellent surface quality and isolate vibration. Design parameters such as IFOV, spectral resolution, observation interval within limited satellite resources must be carefully optimized. Greenhouse gases Observing SATellite (GOSAT) has been providing global high spectral resolution data for almost 4 years. Instrument performance, radiometric calibration, radiative transfer calculation and laboratory spectroscopy are all important. The first step was to reduce bias of column-averaged dry air mole fractions (the Level 2 product) of CO2 and CH4 (XCO2 and XCH4) and validate using well calibrated data such as TCCON. After 2 years of operation, latitudinal distribution of zonal mean and seasonal variation at these sites can be measured with better than 2ppm accuracy. However, validations are limited to ideal conditions. Next step is to evaluate consistency of measured values from long periods since launch, different surface types, and various input radiance with different instrument gain. For long term radiometric calibration, we have uses vicarious, onboard solar diffuser, and lunar calibration data. Over the ocean

  13. Remote sensing surveys design in regional agricultural inventories

    Science.gov (United States)

    Andreev, G. G.; Djemardian, Y. A.; Ezkov, V. V.; Sazanov, N. V.

    In this paper, we consider the methodology problems of remote sensing surveys design in regional agricultural inventories. The strategy of samples, based on the combined use of multispectral aerospace data and ground truth data obtained on test sites in the region under supervision, is used. The strategy of samples includes: selection of areas, which are statistically homogenous with certain agricultural parameters under research, identification of representative test sites grid; remote sensing from aerospace platforms and ground truth data acquisition on test sites as well. The ground measurements of biometrical parameters of certain agricultural crops under research are taken at test sites, maps of anomalies are compiled, spectrometrical and other optico-physical characteristics of vegetation canopies and soils are defined. The derived data are used in automatic interactive imagery processing at the training stages of the procedures of classification and application of thematical remote sensing data processing results to the entire region.

  14. [First stage of the cross-cultural adaptation of the instrument The Vulnerable Elders Survey (VES-13) to Portuguese].

    Science.gov (United States)

    Luz, Laércio Lima; Santiago, Lívia Maria; Silva, João Francisco Santos da; Mattos, Inês Echenique

    2013-03-01

    The aim of this study was to describe the initial stages of the cross-cultural adaptation of the instrument The Vulnerable Elders Survey (VES-13) for use in the context of cancer care in Brazil. Two translations into Portuguese and two back-translations into English were carried out independently, and a formal assessment of the general and referential meanings was performed in order to obtain a synthesis version. Understanding of the synthesis version was evaluated in a pretest applied to 33 patients in an oncologic hospital of the Brazilian Unified National Health System (SUS). The version was easily applied in the intended context and was well-accepted by elders. The Portuguese version of the VES-13 proved to be well understood and adequate for testing its psychometric qualities. The latter step is currently in the final phase.

  15. A survey on the high reliability software verification and validation technology for instrumentation and control in NPP.

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Kee Choon; Lee, Chang Soo; Dong, In Sook [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-01-01

    This document presents the technical status of the software verification and validation (V and V) efforts to support developing and licensing digital instrumentation and control (I and C) systems in nuclear power plants. We have reviewed codes and standards to be concensus criteria among vendor, licensee and licenser. Then we have described the software licensing procedures under 10 CFR 50 and 10 CFR 52 of the United States cope with the licensing barrier. At last, we have surveyed the technical issues related to developing and licensing the high integrity software for digital I and C systems. These technical issues let us know the development direction of our own software V and V methodology. (Author) 13 refs., 2 figs.,.

  16. Induced Polarization Surveying for Acid Rock Screening in Highway Design

    Science.gov (United States)

    Butler, K. E.; Al, T.; Bishop, T.

    2004-05-01

    Highway and pipeline construction agencies have become increasingly vigilant in their efforts to avoid cutting through sulphide-bearing bedrock that has potential to produce acid rock drainage. Blasting and fragmentation of such rock increases the surface area available for sulphide oxidation and hence increases the risk of acid rock drainage unless the rock contains enough natural buffering capacity to neutralize the pH. In December, 2001, the New Brunswick Department of Transportation (NBOT) sponsored a field trial of geophysical surveying in order to assess its suitability as a screening tool for locating near-surface sulphides along proposed highway alignments. The goal was to develop a protocol that would allow existing programs of drilling and geochemical testing to be targeted more effectively, and provide design engineers with the information needed to reduce rock cuts where necessary and dispose of blasted material in a responsible fashion. Induced polarization (IP) was chosen as the primary geophysical method given its ability to detect low-grade disseminated mineralization. The survey was conducted in dipole-dipole mode using an exploration-style time domain IP system, dipoles 8 to 25 m in length, and six potential dipoles for each current dipole location (i.e. n = 1 - 6). Supplementary information was provided by resistivity and VLF-EM surveys sensitive to lateral changes in electrical conductivity, and by magnetic field surveying chosen for its sensitivity to the magnetic susceptibility of pyrrhotite. Geological and geochemical analyses of samples taken from several IP anomalies located along 4.3 line-km of proposed highway confirmed the effectiveness of the screening technique. IP pseudosections from a region of metamorphosed shales and volcaniclastic rocks identified discrete, well-defined mineralized zones. Stronger, overlapping, and more laterally extensive IP anomalies were observed over a section of graphitic and sulphide-bearing metasedimentary

  17. Design and manufacturing of non-instrumented capsule for advanced PWR fuel pellet irradiation test in HANARO

    Energy Technology Data Exchange (ETDEWEB)

    Kim, D. H.; Lee, C. B.; Song, K. W. [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2002-04-01

    This project is preparing to irradiation test of the developed large grain UO{sub 2} fuel pellet in HANARO for pursuit fuel safety and high burn-up in 'Advanced LWR Fuel Technology Development Project' as a part Nuclear Mid and Long-term R and D Program. On the basis test rod is performed the nuclei property and preliminary fuel performance analysis, test rod and non-instrumented capsule are designed and manufactured for irradiation test in HANARO. This non-instrumented irradiation capsule of Advanced PWR Fuel pellet was referred the non-instrumented capsule for an irradiation test of simulated DUPIC fuel in HANARO(DUPIC Rig-001) and 18-element HANARO fuel, was designed to ensure the integrity and the endurance of non-instrumented capsule during the long term(2.5 years) irradiation. To irradiate the UO{sub 2} pellets up to the burn-up 70 MWD/kgU, need the time about 60 months and ensure the integrity of non-instrumented capsule for 30 months until replace the new capsule. This non-instrumented irradiation capsule will be based to develope the non-instrumented capsule for the more long term irradiation in HANARO. 22 refs., 13 figs., 5 tabs. (Author)

  18. The Design and Manufacturing Report of Non-Instrumented Rig for Dual-cooled Annular Fuel Irradiation Test in HANARO

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dae Ho; Bang, Je Geon; Lim, Ik Sung; Kim, Sun Ki; Yang, Yong Sik; Song, Kun Woo; Seo, Chul Gyo; Park, Chan Kook

    2008-09-15

    This project is preparing to irradiation test of the developed double cooled annular fuel pellet in HANARO for pursuit advanced performance in High Performance Fuel Technology Development as a part Nuclear Mid and Long-term R and D Program. On the basis test rod is performed the nuclei property and preliminary fuel performance analysis, test rod and non-instrumented rig designed and manufactured for irradiation test in HANARO OR hole. This non- instrumented rig was confirmed the compatibility of HANARO and the integrity of rig structure, and satisfied the quality assurance requirements. This non- instrumented rig is adopt to the irradiation test for double cooled annular fuel pellet in HANARO.

  19. Design, validation, and reliability of survey to measure female athlete triad knowledge among coaches

    Directory of Open Access Journals (Sweden)

    Jillian E. Frideres

    2015-06-01

    Full Text Available The purpose of this study was to design and to test the validity and reliability of an instrument to evaluate coaches' knowledge about the female athlete triad syndrome and their confidence in this knowledge. The instrument collects information regarding: knowledge of the syndrome, components, prevention and intervention; confidence of the coaches in their answers; and coach's characteristics (gender, degree held, years of experience in coaching females, continuing education participation specific to the syndrome and its components, and sport coached. The process of designing the questionnaire and testing the validity and reliability of it was done in four phases: a design and development of the instrument, b content validity, c instrument reliability, and d concurrent validity. The results show that the instrument is suitable for measuring coaches' female athlete triad knowledge. The instrument can contribute to assessing the coaches' knowledge level in relation to this topic.

  20. Design and performance of the Stratospheric Aerosol and Gas Experiment II (SAGE II) instrument

    Science.gov (United States)

    Zaun, N. H.; Mauldin, L. E., III; Mccormick, M. P.

    1983-01-01

    Design and performance data are analyzed for the Stratospheric Aerosol and Gas Experiment II (SAGE II) instrument, which has been developed for the NASA Earth Radiation Budget Satellite (ERBS). SAGE II is designed to monitor globally, from 70 degrees S to 70 degrees N latitude, the vertical distribution of stratospheric aerosols, ozone, water vapor, and nitrogen dioxide by measuring the extinction of solar radiation through the earth's atmosphere during the ERBS observatory solar occultations. A flat scanning mirror reflects solar radiation into a Cassegrain type telescope, which forms a solar image on the entrance slit of a grating spectrometer. The instantaneous-field-of-view of the SAGE II is scanned along the vertical solar diameter by the elevation scan mirror. The optical system is contained within an azimuth gimbal which tracks the solar radiometric centroid during the data event, while the spectrometer isolates seven spectral wavelengths from 0.385-1.02 micrometers. The seven channels of the spectrometer use silicon photodiode dedectors operated in the photovoltaic mode. The detector outputs are multiplexed into a serial data stream for readout by the ERBS telemetry system, with each output being sampled 64 times per second and digitized to 12 bit resolution.

  1. Design of the 2D electron cyclotron emission imaging instrument for the J-TEXT tokamak

    Science.gov (United States)

    Pan, X. M.; Yang, Z. J.; Ma, X. D.; Zhu, Y. L.; Luhmann, N. C.; Domier, C. W.; Ruan, B. W.; Zhuang, G.

    2016-11-01

    A new 2D Electron Cyclotron Emission Imaging (ECEI) diagnostic is being developed for the J-TEXT tokamak. It will provide the 2D electron temperature information with high spatial, temporal, and temperature resolution. The new ECEI instrument is being designed to support fundamental physics investigations on J-TEXT including MHD, disruption prediction, and energy transport. The diagnostic contains two dual dipole antenna arrays corresponding to F band (90-140 GHz) and W band (75-110 GHz), respectively, and comprises a total of 256 channels. The system can observe the same magnetic surface at both the high field side and low field side simultaneously. An advanced optical system has been designed which permits the two arrays to focus on a wide continuous region or two radially separate regions with high imaging spatial resolution. It also incorporates excellent field curvature correction with field curvature adjustment lenses. An overview of the diagnostic and the technical progress including the new remote control technique are presented.

  2. Design of the 2D electron cyclotron emission imaging instrument for the J-TEXT tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Pan, X. M.; Yang, Z. J., E-mail: yangzj@hust.edu.cn; Ma, X. D.; Ruan, B. W.; Zhuang, G. [State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology, Wuhan, Hubei 430074 (China); Zhu, Y. L. [School of Physics, University of Science and Technology of China, Anhui 230026 (China); Luhmann, N. C.; Domier, C. W. [Davis Millimeter Wave Research Center, University of California, Davis, California 95616 (United States)

    2016-11-15

    A new 2D Electron Cyclotron Emission Imaging (ECEI) diagnostic is being developed for the J-TEXT tokamak. It will provide the 2D electron temperature information with high spatial, temporal, and temperature resolution. The new ECEI instrument is being designed to support fundamental physics investigations on J-TEXT including MHD, disruption prediction, and energy transport. The diagnostic contains two dual dipole antenna arrays corresponding to F band (90-140 GHz) and W band (75-110 GHz), respectively, and comprises a total of 256 channels. The system can observe the same magnetic surface at both the high field side and low field side simultaneously. An advanced optical system has been designed which permits the two arrays to focus on a wide continuous region or two radially separate regions with high imaging spatial resolution. It also incorporates excellent field curvature correction with field curvature adjustment lenses. An overview of the diagnostic and the technical progress including the new remote control technique are presented.

  3. Current State of Agile User-Centered Design: A Survey

    Science.gov (United States)

    Hussain, Zahid; Slany, Wolfgang; Holzinger, Andreas

    Agile software development methods are quite popular nowadays and are being adopted at an increasing rate in the industry every year. However, these methods are still lacking usability awareness in their development lifecycle, and the integration of usability/User-Centered Design (UCD) into agile methods is not adequately addressed. This paper presents the preliminary results of a recently conducted online survey regarding the current state of the integration of agile methods and usability/UCD. A world wide response of 92 practitioners was received. The results show that the majority of practitioners perceive that the integration of agile methods with usability/UCD has added value to their adopted processes and to their teams; has resulted in the improvement of usability and quality of the product developed; and has increased the satisfaction of the end-users of the product developed. The top most used HCI techniques are low-fidelity prototyping, conceptual designs, observational studies of users, usability expert evaluations, field studies, personas, rapid iterative testing, and laboratory usability testing.

  4. Design and Test of an Instrument for Measuring Microthermal Seeing on the Magdalena Ridge

    Science.gov (United States)

    Jorgensen, A. M.; Klinglesmith, D. A., III; Speights, J.; Clements, A.; Patel, J.

    2009-05-01

    We have constructed and operated an automated instrument for measuring ground-level microthermal seeing at the Magdalena Ridge Observatory (MRO). The MRO is located at an altitude of 10500' in the Cibola National Forest in New Mexico, USA. It is the planned site for the MRO Optical Interferometer (MROI) planned for up to 10 collecting elements, each with a diameter of 1.4 m, and baselines eventually up to approximately 400 m. As part of the preparation for construction we deployed a system to characterize the ground-level seeing across the observatory site. The instrument is built largely of off-the-shelf components, with only the sensor head and power supply requiring electronic board assembly. Even in those cases the board architecture is very simple. The first proof-of-concept system was deployed for several weeks in the autumn of 2004, and has since undergone several iterations. The latest configuration operates entirely off batteries, incorporates wireless data acquisition, and is thus able to operate in an area with no shelter, power, or communications. In this paper we present the design of the instrument, and show initial data. The microthermal tower has four sensor pairs at heights from 0.8 to 4.41 m, significantly lower than other microthermal experiments, because of the need to characterize the seeing near the ground. We find significant variation in the contribution of this range of heights to the seeing, contributing up to 0farcs3 of the seeing at some times and only 0farcs02 at other times. The individual sensor power spectra have a slope in the range of 1.4--1.5, which is lower than the 1.67 slope predicted by Kolmogorov turbulence theory. We measure the well known effect of improved seeing immediately around sunset. While we find significant variation in the microthermal seeing, we did not find a pattern of corresponding variations in weather conditions, suggesting that a complicated set of factors control microthermal turbulence.

  5. Modified ERT instrumentation for geo-scientific surveys in the historical centre of Mesagne (Brindisi, Southern Italy)

    Science.gov (United States)

    Leucci, Giovanni; De Giorgi, Lara; Terenzio Gizzi, Fabrizio; Persico, Raffaele

    2016-04-01

    The town of Mesagne is one of the sites at greatest geological risk in the north Salento peninsula. In the last few decades, the historical centre of Mesagne has been affected by a series of subsidence events, which have, in some cases, resulted in the partial collapse of buildings and road surfaces. The last event was in the January 2014. It caused subsidence phenomenon in a wide area and many families have been forced from their homes. These events have had both social repercussions, causing alarm and emergency situations, and economic repercussions in terms of the expense of restoration. In order to determine the causes of the ground subsidence events, integrated geophysical surveys were undertaken in the historical centre of Mesagne. In addition, the analysis of several wells allowed the 3D model reconstruction related both to the geology and to the groundwater depth in the surveyed areas. With the purpose of estimating the dimensions of the phenomenon and its possible relationship with both specific environmental conditions (for instance groundwater depth variation) and anthropic conditions (for instance the losses in water supply and sanitation) some geophysical measurements were repeated in the time. For this purpose a modified ERT instrumentation together GPR were used. The study led to the production of a detailed description of the subsidence causes that allows a quick action to restore security conditions in the area.

  6. A Critical Review of Surveys Emphasizing on Routing in Wireless Sensor Networks—An Anatomization under General Survey Design Framework

    Science.gov (United States)

    2017-01-01

    A large number of routing-related surveys are published so far for Wireless Sensor Networks (WSNs) that exhibit either complete or partial emphasis on routing in WSNs. These surveys classify and discuss the relevant routing protocols published mainly in the fields of classical, energy efficient, secure, hierarchical, geographic, intelligent, Quality of Service (QoS)-based and multipath WSNs. However, to the best of our knowledge, no study is presented so far which may clearly categorize the routing-related survey literature for WSNs.To fill this gap, an effort is made in this paper for presenting an in-depth review of already published routing-related survey literature in WSNs. Our review initially proposes a generalized survey design model and afterwards analyzes the routing-related survey literature in the light of the devised General Survey Design Framework (GSDF). Such an analysis describes the design soundness of the published routing-related surveys. Therefore, our review puts forth an original classification based on the frequency-of-survey-publication and taxonomizes the corresponding routing-related fields into high, medium and low focused areas of survey publication in WSNs. Furthermore, the surveys belonging to each main category are sub-categorized into various sub-classes and briefly discussed according to their design characteristics. On the one hand, this review is useful for beginners who may easily explore the already published routing-related survey literature in WSNs in a single document and investigate it by spending less effort. On the other hand, it is useful for expert researchers who may explore the trends and frequency of writing surveys in different areas of routing in WSNs. The experts may explore those areas of routing which are either neglected or least focused or lack in design soundness as per general survey design framework. In the end, insights and future research directions are outlined and a reasonable conclusion is put forth

  7. Ethical challenges in designing and conducting medicine quality surveys

    OpenAIRE

    Tabernero, P; Parker, M.; Ravinetto, R; Phanouvong, S; Yeung, S; Kitutu, FE; Cheah, PY; MAYXAY, M; Guerin, PJ; Newton, PN

    2016-01-01

    ObjectivesIn this paper we discuss the main ethical challenges related to the conduct of medicine quality surveys and make suggestions on how to address them. MethodMost evidence-based information regarding medicine quality derives from surveys. However, existing research ethical guidelines do not provide specific guidance for medicine quality surveys. Hence, those conducting surveys are often left wondering how to judge what counts as best practice. A list of the main ethical challenges in t...

  8. Practical Tools for Designing and Weighting Survey Samples

    Science.gov (United States)

    Valliant, Richard; Dever, Jill A.; Kreuter, Frauke

    2013-01-01

    Survey sampling is fundamentally an applied field. The goal in this book is to put an array of tools at the fingertips of practitioners by explaining approaches long used by survey statisticians, illustrating how existing software can be used to solve survey problems, and developing some specialized software where needed. This book serves at least…

  9. Practical Tools for Designing and Weighting Survey Samples

    Science.gov (United States)

    Valliant, Richard; Dever, Jill A.; Kreuter, Frauke

    2013-01-01

    Survey sampling is fundamentally an applied field. The goal in this book is to put an array of tools at the fingertips of practitioners by explaining approaches long used by survey statisticians, illustrating how existing software can be used to solve survey problems, and developing some specialized software where needed. This book serves at least…

  10. Design and Specification of Optical Bandpass Filters for Hubble Space Telescope (HST) Advanced Camera for Surveys (ACS)

    Science.gov (United States)

    Leviton, Douglas B.; Tsevetanov, Zlatan; Woodruff, Bob; Mooney, Thomas A.

    1998-01-01

    Advanced optical bandpass filters for the Hubble Space Telescope (HST) Advanced Camera for Surveys (ACS) have been developed on a filter-by-filter basis through detailed studies which take into account the instrument's science goals, available optical filter fabrication technology, and developments in ACS's charge-coupled-device (CCD) detector technology. These filters include a subset of filters for the Sloan Digital Sky Survey (SDSS) which are optimized for astronomical photometry using today's charge-coupled-devices (CCD's). In order for ACS to be truly advanced, these filters must push the state-of-the-art in performance in a number of key areas at the same time. Important requirements for these filters include outstanding transmitted wavefront, high transmittance, uniform transmittance across each filter, spectrally structure-free bandpasses, exceptionally high out of band rejection, a high degree of parfocality, and immunity to environmental degradation. These constitute a very stringent set of requirements indeed, especially for filters which are up to 90 mm in diameter. The highly successful paradigm in which final specifications for flight filters were derived through interaction amongst the ACS Science Team, the instrument designer, the lead optical engineer, and the filter designer and vendor is described. Examples of iterative design trade studies carried out in the context of science needs and budgetary and schedule constraints are presented. An overview of the final design specifications for the ACS bandpass and ramp filters is also presented.

  11. Cross-Sectional and Longitudinal Surveys of Dental Student Values: Limitations of Cross-Sectional Design.

    Science.gov (United States)

    Sakumura, Joseph S.

    Surveys of dental student values are described that were designed to assess value ratings by four dental classes in 1976, annual value ratings of a freshman class as they progressed through their four year program, and the usefulness of the cross-sectional design versus the longitudinal design. Each of the two surveys, which were conducted by the…

  12. Developing a survey instrument to assess the readiness of primary care data, genetic and disease registries to conduct linked research: TRANSFoRm International Research Readiness (TIRRE survey instrument

    Directory of Open Access Journals (Sweden)

    Emily Leppenwell

    2013-05-01

    Full Text Available Background Clinical data are collected for routine care in family practice; there are also a growing number of genetic and cancer registry data repositories. The Translational Research and Patient Safety in Europe (TRANSFoRm project seeks to facilitate research using linked data from more than one source. We performed a requirements analysis which identified a wide range of data and business process requirements that need to be met before linking primary care and either genetic or disease registry data.Objectives To develop a survey to assess the readiness of data repositories to participate in linked research – the Transform International Research Readiness (TIRRE survey.Method We develop the questionnaire based on our requirement analysis; with questions at micro-, meso- and macro levels of granularity, study-specific questions about diabetes and gastro-oesophageal reflux disease (GORD, and research track record. The scope of the data required was extensive. We piloted this instrument, conducting ten preliminary telephone interviews to evaluate the response to the questionnaire.Results Using feedback gained from these interviews we revised the questionnaire; clarifying questions that were difficult to answer and utilising skip logic to create different series of questions for the various types of data repository. We simplified the questionnaire replacing free-text responses with yes/no or picking list options, wherever possible. We placed the final questionnaire online and encouraged its use (www.clininf.eu/jointirre/info.html.Conclusion Limited field testing suggests that TIRRE is capable of collecting comprehensive and relevant data about the suitability and readiness of data repositories to participate in linked data research.

  13. The construct validation of an instrument designed to assess organisational socialisation

    Directory of Open Access Journals (Sweden)

    Michelle Mudurai

    2008-09-01

    Full Text Available The aim of this study was to establish the construct validity of an instrument for assessing organisational socialisation. A purposive sample of 170 respondents completed the socialisation instrument. Scale reliabilities and a confrmatory factor analysis confrmed six constructs (History, Language, Politics, People, Organisational Goals and Values, and Performance Profciency as measures of this domain. The signifcance of the fndings of this study is that from a South African perspective, the socialisation instrument can be useful in measuring organisational socialisation. This instrument can also be valuable in assessing the effectiveness of the socialisation tactics used by organisations.

  14. Textile materials for the design of wearable antennas: a survey.

    Science.gov (United States)

    Salvado, Rita; Loss, Caroline; Gonçalves, Ricardo; Pinho, Pedro

    2012-11-15

    In the broad context of Wireless Body Sensor Networks for healthcare and pervasive applications, the design of wearable antennas offers the possibility of ubiquitous monitoring, communication and energy harvesting and storage. Specific requirements for wearable antennas are a planar structure and flexible construction materials. Several properties of the materials influence the behaviour of the antenna. For instance, the bandwidth and the efficiency of a planar microstrip antenna are mainly determined by the permittivity and the thickness of the substrate. The use of textiles in wearable antennas requires the characterization of their properties. Specific electrical conductive textiles are available on the market and have been successfully used. Ordinary textile fabrics have been used as substrates. However, little information can be found on the electromagnetic properties of regular textiles. Therefore this paper is mainly focused on the analysis of the dielectric properties of normal fabrics. In general, textiles present a very low dielectric constant that reduces the surface wave losses and increases the impedance bandwidth of the antenna. However, textile materials are constantly exchanging water molecules with the surroundings, which affects their electromagnetic properties. In addition, textile fabrics are porous, anisotropic and compressible materials whose thickness and density might change with low pressures. Therefore it is important to know how these characteristics influence the behaviour of the antenna in order to minimize unwanted effects. This paper presents a survey of the key points for the design and development of textile antennas, from the choice of the textile materials to the framing of the antenna. An analysis of the textile materials that have been used is also presented.

  15. A LEKID-based CMB instrument design for large-scale observations in Greenland

    CERN Document Server

    Araujo, D C; Bond, J R; Bradford, K J; Chapman, D; Che, G; Day, P K; Didier, J; Doyle, S; Eriksen, H K; Flanigan, D; Groppi, C E; Hillbrand, S N; Johnson, B R; Jones, G; Limon, M; Miller, A D; Mauskopf, P; McCarrick, H; Mroczkowski, T; Reichborn-Kjennerud, B; Smiley, B; Sobrin, J; Wehus, I K; Zmuidzinas, J

    2014-01-01

    We present the results of a feasibility study, which examined deployment of a ground-based millimeter-wave polarimeter, tailored for observing the cosmic microwave background (CMB), to Isi Station in Greenland. The instrument for this study is based on lumped-element kinetic inductance detectors (LEKIDs) and an F/2.4 catoptric, crossed-Dragone telescope with a 500 mm aperture. The telescope is mounted inside the receiver and cooled to $<\\,4$ K by a closed-cycle $^4$He refrigerator to reduce background loading on the detectors. Linearly polarized signals from the sky are modulated with a metal-mesh half-wave plate that is rotated at the aperture stop of the telescope with a hollow-shaft motor based on a superconducting magnetic bearing. The modular detector array design includes at least 2300 LEKIDs, and it can be configured for spectral bands centered on 150~GHz or greater. Our study considered configurations for observing in spectral bands centered on 150, 210 and 267~GHz. The entire polarimeter is mounte...

  16. Design and implementation of quench detection instrumentation for TF magnet system of SST-1

    Energy Technology Data Exchange (ETDEWEB)

    Khristi, Y.; Sharma, A.N.; Doshi, K.; Banaudha, M.; Prasad, U.; Varmora, P.; Patel, D.; Pradhan, S., E-mail: subrata.s.pradhan@gmail.com

    2014-05-15

    Steady State Superconducting Tokamak-1 (SST-1) at Institute for Plasma Research (IPR), India is now in engineering validation phase. The assembled Toroidal Field (TF) magnet system of SST-1 will be operated at 10 kA of nominal current at helium cooled condition of 4.5 K. A reliable and fail proof quench detection (QD) system is essential for the safety and the investment protection requirements of the magnets. This QD system needs to continuously monitor all the superconducting coils, which include 16 TF magnets, return-loop, bus bars and current leads. In case of any event initiating the normal resistive zone and reaching thermal run-away, the QD system needs to trigger the magnet protection circuits. Precision instrumentation and control system with 204 signal channels had been developed for detection of quench anywhere in the entire TF magnet system. In the present configuration of quench detection scheme, the voltage drop across each double pancake (DP) of each TF coil are compared with its two adjacent DPs for the detection of normal zone and cancelation of inductive couples. Two identical redundant systems with one out of two configurations are successfully commissioned and tested at IPR. This paper describes the design and implementation of the QD system, Installation experience, validation test and initial results from the recent SST-1 magnet system charging.

  17. Trajectory Design for the Transiting Exoplanet Survey Satellite (TESS)

    Science.gov (United States)

    Dichmann, Donald J.; Parker, Joel; Williams, Trevor; Mendelsohn, Chad

    2014-01-01

    The Transiting Exoplanet Survey Satellite (TESS) is a National Aeronautics and Space Administration (NASA) mission launching in 2017. TESS will travel in a highly eccentric orbit around Earth, with initial perigee radius near 17 Earth radii (Re) and apogee radius near 59 Re. The orbit period is near 2:1 resonance with the Moon, with apogee nearly 90 degrees out-of-phase with the Moon, in a configuration that has been shown to be operationally stable. TESS will execute phasing loops followed by a lunar flyby, with a final maneuver to achieve 2:1 resonance with the Moon. The goals of a resonant orbit with long-term stability, short eclipses and limited oscillations of perigee present significant challenges to the trajectory design. To rapidly assess launch opportunities, we adapted the SWM76 launch window tool to assess the TESS mission constraints. To understand the long-term dynamics of such a resonant orbit in the Earth-Moon system we employed Dynamical Systems Theory in the Circular Restricted 3-Body Problem (CR3BP). For precise trajectory analysis we use a high-fidelity model and multiple shooting in the General Mission Analysis Tool (GMAT) to optimize the maneuver delta-V and meet mission constraints. Finally we describe how the techniques we have developed can be applied to missions with similar requirements.

  18. Trajectory Design for the Transiting Exoplanet Survey Satellite

    Science.gov (United States)

    Dichmann, Donald J.; Parker, Joel J. K.; Williams, Trevor W.; Mendelsohn, Chad R.

    2014-01-01

    The Transiting Exoplanet Survey Satellite (TESS) is a National Aeronautics and Space Administration (NASA) mission, scheduled to be launched in 2017. TESS will travel in a highly eccentric orbit around Earth, with initial perigee radius near 17 Earth radii (Re) and apogee radius near 59 Re. The orbit period is near 2:1 resonance with the Moon, with apogee nearly 90 degrees out-of-phase with the Moon, in a configuration that has been shown to be operationally stable. TESS will execute phasing loops followed by a lunar flyby, with a final maneuver to achieve 2:1 resonance with the Moon. The goals of a resonant orbit with long-term stability, short eclipses and limited oscillations of perigee present significant challenges to the trajectory design. To rapidly assess launch opportunities, we adapted the Schematics Window Methodology (SWM76) launch window analysis tool to assess the TESS mission constraints. To understand the long-term dynamics of such a resonant orbit in the Earth-Moon system we employed Dynamical Systems Theory in the Circular Restricted 3-Body Problem (CR3BP). For precise trajectory analysis we use a high-fidelity model and multiple shooting in the General Mission Analysis Tool (GMAT) to optimize the maneuver delta-V and meet mission constraints. Finally we describe how the techniques we have developed can be applied to missions with similar requirements. Keywords: resonant orbit, stability, lunar flyby, phasing loops, trajectory optimization

  19. The 4MOST instrument concept overview

    NARCIS (Netherlands)

    Haynes, Roger; Barden, Samuel; de Jong, Roelof; Schnurr, Olivier; Bellido, Olga; Walcher, Jakob; Haynes, Dionne; Winkler, Roland; Bauer, Svend-Marian; Dionies, Frank; Saviauk, Allar; Chiappini, Cristina; Schwope, Axel; Brynnel, Joar; Steinmetz, Matthias; McMahon, Richard; Feltzing, Sofia; Francois, Patrick; Trager, Scott; Parry, Ian; Irwin, Mike; Walton, Nicholas; King, David; Sun, David; Gonzalez-Solares, Eduaro; Tosh, Ian; Dalton, Gavin; Middleton, Kevin; Bonifacio, Piercarlo; Jagourel, Pascal; Mignot, Shan; Cohen, Mathieu; Amans, Jean-Philippe; Royer, Frederic; Sartoretti, Paola; Pragt, Johan; Gerlofsma, Gerrit; Roelfsema, Ronald; Navarro, Ramon; Thimm, Guido; Seifert, Walter; Christlieb, Norbert; Mandel, Holger; Trifonov, Trifon; Xu, Wenli; Lang-Bardl, Florian; Muschielok, Bernard; Schlichter, Jörg; Hess, Hans-Joachim; Grupp, Frank; Boehringer, Hans; Boller, Thomas; Dwelly, Tom; Bender, Ralf; Rosati, Piero; Iwert, Olaf; Finger, Gert; Lizon L'Allemand, Jean-Louis; Saunders, Will; Sheinis, Andrew; Frost, Gabriella; Farrell, Tony; Waller, Lewis; Depagne, Eric; Laurent, Florence; Caillier, Patrick; Kosmalski, Johan; Richard, Johan; Bacon, Roland; Ansorge, Wolfgang

    2014-01-01

    The 4MOST[1] instrument is a concept for a wide-field, fibre-fed high multiplex spectroscopic instrument facility on the ESO VISTA telescope designed to perform a massive (initially >25x106 spectra in 5 years) combined all-sky public survey. The main science drivers are: Gaia follow up of chemo-dyna

  20. Influenza knowledge, attitude, and behavior survey for grade school students: design and novel assessment methodology.

    Science.gov (United States)

    Koep, Tyler H; Huskins, W Charles; Clemens, Christal; Jenkins, Sarah; Pierret, Chris; Ekker, Stephen C; Enders, Felicity T

    2014-12-01

    Despite the fact infectious diseases can spread readily in grade schools, few studies have explored prevention in this setting. Additionally, we lack valid tools for students to self-report knowledge, attitudes, and behaviors. As part of an ongoing study of a curriculum intervention to promote healthy behaviors, we developed and evaluated age-appropriate surveys to determine students' understanding of influenza prevention. Surveys were adapted from adolescent and adult influenza surveys and administered to students in grades 2-5 (ages 7-11) at two Rochester public schools. We assessed student understanding by analyzing percent repeatability of 20 survey questions and compared percent "don't know" (DK) responses across grades, gender, and race. Questions thought to be ambiguous after early survey administration were investigated in student focus groups, modified as appropriate, and reassessed. The response rate across all surveys was >87%. Survey questions were well understood; 16 of 20 questions demonstrated strong pre/post repeatability (>70%). Only 1 question showed an increase in DK response for higher grades (p survey questions and improved measures of understanding in the final survey administration. Grade-school students' knowledge, attitudes and behavior toward influenza prevention can be assessed using surveys. Quantitative and qualitative analysis may be used to assess participant understanding and refine survey development for pediatric survey instruments. These methods may be used to assess the repeatability and validity of surveys to assess the impact of health education interventions in young children.

  1. Patient experience and satisfaction with inpatient service: development of short form survey instrument measuring the core aspect of inpatient experience.

    Directory of Open Access Journals (Sweden)

    Eliza L Y Wong

    Full Text Available Patient experience reflects quality of care from the patients' perspective; therefore, patients' experiences are important data in the evaluation of the quality of health services. The development of an abbreviated, reliable and valid instrument for measuring inpatients' experience would reflect the key aspect of inpatient care from patients' perspective as well as facilitate quality improvement by cultivating patient engagement and allow the trends in patient satisfaction and experience to be measured regularly. The study developed a short-form inpatient instrument and tested its ability to capture a core set of inpatients' experiences. The Hong Kong Inpatient Experience Questionnaire (HKIEQ was established in 2010; it is an adaptation of the General Inpatient Questionnaire of the Care Quality Commission created by the Picker Institute in United Kingdom. This study used a consensus conference and a cross-sectional validation survey to create and validate a short-form of the Hong Kong Inpatient Experience Questionnaire (SF-HKIEQ. The short-form, the SF-HKIEQ, consisted of 18 items derived from the HKIEQ. The 18 items mainly covered relational aspects of care under four dimensions of the patient's journey: hospital staff, patient care and treatment, information on leaving the hospital, and overall impression. The SF-HKIEQ had a high degree of face validity, construct validity and internal reliability. The validated SF-HKIEQ reflects the relevant core aspects of inpatients' experience in a hospital setting. It provides a quick reference tool for quality improvement purposes and a platform that allows both healthcare staff and patients to monitor the quality of hospital care over time.

  2. A Frailty Instrument for primary care: findings from the Survey of Health, Ageing and Retirement in Europe (SHARE

    Directory of Open Access Journals (Sweden)

    Romero-Ortuno Roman

    2010-08-01

    Full Text Available Abstract Background A frailty paradigm would be useful in primary care to identify older people at risk, but appropriate metrics at that level are lacking. We created and validated a simple instrument for frailty screening in Europeans aged ≥50. Our study is based on the first wave of the Survey of Health, Ageing and Retirement in Europe (SHARE, http://www.share-project.org, a large population-based survey conducted in 2004-2005 in twelve European countries. Methods Subjects: SHARE Wave 1 respondents (17,304 females and 13,811 males. Measures: five SHARE variables approximating Fried's frailty definition. Analyses (for each gender: 1 estimation of a discreet factor (DFactor model based on the frailty variables using LatentGOLD®. A single DFactor with three ordered levels or latent classes (i.e. non-frail, pre-frail and frail was modelled; 2 the latent classes were characterised against a biopsychosocial range of Wave 1 variables; 3 the prospective mortality risk (unadjusted and age-adjusted for each frailty class was established on those subjects with known mortality status at Wave 2 (2007-2008 (11,384 females and 9,163 males; 4 two web-based calculators were created for easy retrieval of a subject's frailty class given any five measurements. Results Females: the DFactor model included 15,578 cases (standard R2 = 0.61. All five frailty indicators discriminated well (p N = 10,420; 66.9%, pre-frail (N = 4,025; 25.8%, and frail (N = 1,133; 7.3%. Relative to the non-frail class, the age-adjusted Odds Ratio (with 95% Confidence Interval for mortality at Wave 2 was 2.1 (1.4 - 3.0 in the pre-frail and 4.8 (3.1 - 7.4 in the frail. Males: 12,783 cases (standard R2 = 0.61, all frailty indicators had p N = 10,517; 82.3%, pre-frail (N = 1,871; 14.6%, and frail (N = 395; 3.1%; age-adjusted OR (95% CI for mortality: 3.0 (2.3 - 4.0 in the pre-frail, 6.9 (4.7 - 10.2 in the frail. Conclusions The SHARE Frailty Instrument has sufficient construct and

  3. Design and psychometric analysis of an instrument to detect the presence of cyberbullying in a school context

    Directory of Open Access Journals (Sweden)

    Abel Baquero Correa

    2015-07-01

    Full Text Available The objective of this research was to design an instrument to detect cyberbullying in a school context and analyze its psychometric properties. Participants were 299 adolescents (54.2% female and 45.8% male with a mean age of 15 years, belonging to the lower stratum (22.1% and middle layer (78%. A quantitative study with a non-experimental design instrumental and the cross section was performed. Under the classical test theory, adequate internal consistency (Cronbach’s alpha α = .864 and convergent validity with other measures was obtained. Confirmatory factor analysis in SPSS version 21, which resulted in three factors was performed. From item response theory, INFIT found that the items ranged from 0.73 and 1.23 and between 0.74 and 1.24 OUTFIT. Based on the favorable results of psychometric analysis, we conclude that the instrument can be used for detection of cyberbullying in a school context.

  4. Applying Software Engineering Methodology for Designing Biomedical Software Devoted To Electronic Instrumentation

    OpenAIRE

    2012-01-01

    Problem statement: Significant effort goes into the development of biomedical software, which is integrated with computers/processors, sensors and electronic instrumentation devoted to a specific application. However, the scientific work on electronic instrumentation controlled by biomedical software has not emphasized software development, instead focusing mainly on electronics engineering. The development team is rarely composed of Software Engineering (SE) experts. Usually, a commercial au...

  5. Designs on governance : development of policy instruments and dynamics in governance

    NARCIS (Netherlands)

    Voß, Jan-Peter

    2007-01-01

    The thesis analyses the role of policy instruments for dynamics of governance, using case studies on ‘emissisons trading’ and ‘network access regulation in the utilities’. It opens by observing a paradox: Policy instruments are criticised for misrepresenting the complex and contested reality of

  6. The Cabauw Intercomparison campaign for Nitrogen Dioxide measuring Instruments (CINDI): Design, execution, and early results

    NARCIS (Netherlands)

    Piters, A.J.M.; Boersma, K.F.; Kroon, M.; Hains, J.C.; Roozendael, M. van; Wittrock, F.; Abuhassan, N.; Adams, C.; Akrami, M.; Allaart, M.A.F.; Apituley, A.; Beirle, S.; Bergwerff, J.B.; Berkhout, A.J.C.; Brunner, D.; Cede, A.; Chong, J.; Clémer, K.; Fayt, C.; Frieß, U.; Gast, L.F.L.; Gil-Ojeda, M.; Goutail, F.; Graves, R.; Griesfeller, A.; Großmann, K.; Hemerijckx, G.; Hendrick, F.; Henzing, B.; Herman, J.; Hermans, C.; Hoexum, M.; Hoff, G.R. van der; Irie, H.; Johnston, P.V.; Kanaya, Y.; Kim, Y.J.; Klein Baltink, H.; Kreher, K.; Leeuw, G. de; Leigh, R.; Merlaud, A.; Moerman, M.M.; Monks, P.S.; Mount, G.H.; Navarro-Comas, M.; Oetjen, H.; Pazmino, A.; Perez-Camacho, M.; Peters, E.; Du Piesanie, A.; Pinardi, G.; Puentedura, O.; Richter, A.; Roscoe, H.K.; Schönhardt, A.; Schwarzenbach, B.; Shaiganfar, R.; Sluis, W.; Spinei, E.; Stolk, A.P.; Strong, K.; Swart, D.P.J.; Takashima, H.; Vlemmix, T.; Vrekoussis, M.; Wagner, T.; Whyte, C.; Wilson, K.M.; Yela, M.; Yilmaz, S.; Zieger, P.; Zhou, Y.

    2012-01-01

    From June to July 2009 more than thirty different in-situ and remote sensing instruments from all over the world participated in the Cabauw Intercomparison campaign for Nitrogen Dioxide measuring Instruments (CINDI). The campaign took place at KNMI's Cabauw Experimental Site for Atmospheric Research

  7. The Cabauw Intercomparison campaign for Nitrogen Dioxide measuring Instruments (CINDI): design, execution, and early results

    NARCIS (Netherlands)

    Henzing, J.S.; Leeuw, G. de; Piters, A.J.M.; Boersma, K.F.; Kroon, M.; Hains, J.C.; Roozendael, M. van; Wittrock, F.; Abuhassan, N.; Adams, C.; Akrami, M.; Allaart, M.A.F.; Apituley, A.; Bergwerff, J.B.; Berkhout, A.J.C.; Brunner, D.; Cede, A.; Chong, J.; Clémer, K.; Fayt, C.; Friess, U.; Gast, L.F.L.; Gil-Ojeda, M.; Goutail, F.; Graves, R.; Griesfeller, A.; Grossmann, K.; Hemerijckx, G.; Hendrick, F.; Herman, J.; Hermans, C.; Hoexum, M.; Hoff, G.R. van der; Irie, H.; Johnston, P.V.; Kanaya, Y.; Kim, Y.J.; Klein Baltink, H.; Kreher, K.; Leigh, R.; Merlaud, A.; Moerman, M.M.; Monks, P.S.; Mount, G.H.; Navarro-Comas, M.; Oetjen, H.; Pazmino, A.; Perez-Camacho, M.; Peters, E.; Piesanie, A. du; Pinardi, G.; Puentadura, O.; Richter, A.; Roscoe, H.K.; Schönhardt, A.; Schwarzenbach, B.; Shaiganfar, R.; Sluis, W.; Spinei, E.; Stolk, A.P.; Strong, K.; Swart, D.P.J.; Takashima, H.; Vlemmix, T.; Vrekoussis, M.; Wagner, T.; Whyte, C.; Wilson, K.M.; Yela, M.; Yilmaz, S.; Zieger, P.; Zhou, Y.

    2011-01-01

    From June to July 2009 more than thirty different in-situ and remote sensing instruments from all over the world participated in the Cabauw Intercomparison campaign for Nitrogen Dioxide measuring Instruments (CINDI). The campaign took place at KNMI’s 5 Cabauw Experimental Site for Atmospheric Resear

  8. Thermal design of the EarthCARE MSI-VNS instrument

    NARCIS (Netherlands)

    Doornink, J.; Coesel, M.; Lemmen, M.H.J.; Hof, A. van 't

    2011-01-01

    The EarthCARE satellite mission objective is the observation of clouds and aerosols from low Earth orbit. The payload will include active remote sensing instruments being the W- band Cloud Profiling Radar (CPR) and the ATLID LIDAR. These are supported by the passive instruments BroadBand Radiometer

  9. Protocol for the design of an instrument to measure preadolescent children's self-report of covert aggression and bullying

    Science.gov (United States)

    Nelson, Helen Jean; Kendall, Garth Edward; Burns, Sharyn; Schonert-Reichl, Kimberly

    2015-01-01

    Introduction Covert bullying in schools is associated with a range of academic, social, emotional and physical health problems. Much research has focused on bullying, but there remains a gap in understanding about covert aggression and how to most accurately and reliably measure children's own reports of this behaviour. This paper reviews relevant literature and outlines a research project that aims to develop a self-report instrument that effectively measures covert aggression and bullying. It is anticipated that this research will result in a standardised instrument that is suitable for exploring preadolescent children's experiences of covert aggressive behaviour. The data collected by the instrument will enhance health and education professionals understanding of covert bullying behaviours and will inform the design and evaluation of interventions. Methods and analysis Relational developmental systems theory will guide the design of an online self-report instrument. The first phase of the project will include a critical review of the research literature, focus groups with children aged 8–12 years (grades 4–6) in Perth, Western Australia, and expert review. The instrument will be explored for content and face validity prior to the assessment of convergent and discriminant validity, internal consistency and test-retest reliability. Ethics and dissemination The study has been approved by the Curtin University of Human Research Ethics Committee (RDHS-38-15) and by the Executive Principal of the participating school. PMID:26553834

  10. Internet, Phone, Mail, and Mixed-Mode Surveys: The Tailored Design Method, 4th Edition

    Science.gov (United States)

    Dillman, Don A.; Smyth, Jolene D.; Christian, Lean Melani

    2014-01-01

    For over two decades, Dillman's classic text on survey design has aided both students and professionals in effectively planning and conducting mail, telephone, and, more recently, Internet surveys. The new edition is thoroughly updated and revised, and covers all aspects of survey research. It features expanded coverage of mobile phones, tablets,…

  11. SDSS-IV MaNGA: Survey Design and Progress

    Science.gov (United States)

    Yan, Renbin; MaNGA Team

    2016-01-01

    The ongoing SDSS-IV/MaNGA Survey will obtain integral field spectroscopy at a resolution of R~2000 with a wavelength coverage from 3,600A to 10,300A for 10,000 nearby galaxies. Within each 3 degree diameter pointing of the 2.5m Sloan Telescope, we deploy 17 hexagonal fiber bundles with sizes ranging from 12 to 32 arcsec in diameter. The bundles are build with 2 arcsec fibers and have a 56% fill factor. During observations, we obtained sets of exposures at 3 different dither positions to achieve near-critical sampling of the effective point spread function, which has a FWHM about 2.5 arcsec, corresponding to 1-2 kpc for the majority of the galaxies targeted. The flux calibration is done using 12 additional mini-fiber-bundles targeting standard stars simultaneously with science targets, achieving a calibration accuracy better than 5% over 90% of the wavelength range. The target galaxies are selected to ensure uniform spatial coverage in units of effective radii for the majority of the galaxies while maximizing spatial resolution. About 2/3 of the sample is covered out to 1.5Re (primary sample) and 1/3 of the sample covered to 2.5Re (secondary sample). The sample is designed to have approximately equal representation from high and low mass galaxies while maintaining volume-limited selection at fixed absolute magnitudes. We obtain an average S/N of 4 per Angstrom in r-band continuum at a surface brightness of 23 AB arcsec-2. With spectral stacking in an elliptical annulus covering 1-1.5Re, our primary sample galaxies have a median S/N of ~60 per Angstrom in r-band.

  12. The 2-degree Field Lensing Survey: design and clustering measurements

    Science.gov (United States)

    Blake, Chris; Amon, Alexandra; Childress, Michael; Erben, Thomas; Glazebrook, Karl; Harnois-Deraps, Joachim; Heymans, Catherine; Hildebrandt, Hendrik; Hinton, Samuel R.; Janssens, Steven; Johnson, Andrew; Joudaki, Shahab; Klaes, Dominik; Kuijken, Konrad; Lidman, Chris; Marin, Felipe A.; Parkinson, David; Poole, Gregory B.; Wolf, Christian

    2016-11-01

    We present the 2-degree Field Lensing Survey (2dFLenS), a new galaxy redshift survey performed at the Anglo-Australian Telescope. 2dFLenS is the first wide-area spectroscopic survey specifically targeting the area mapped by deep-imaging gravitational lensing fields, in this case the Kilo-Degree Survey. 2dFLenS obtained 70 079 redshifts in the range z relevant algorithms for joint imaging and spectroscopic analysis. The redshift sample consists first of 40 531 Luminous Red Galaxies (LRGs), which enable analyses of galaxy-galaxy lensing, redshift-space distortion, and the overlapping source redshift distribution by cross-correlation. An additional 28 269 redshifts form a magnitude-limited (r values are consistent with those obtained from LRGs in the Baryon Oscillation Spectroscopic Survey. 2dFLenS data products will be released via our website http://2dflens.swin.edu.au.

  13. SURVEY

    DEFF Research Database (Denmark)

    SURVEY er en udbredt metode og benyttes inden for bl.a. samfundsvidenskab, humaniora, psykologi og sundhedsforskning. Også uden for forskningsverdenen er der mange organisationer som f.eks. konsulentfirmaer og offentlige institutioner samt marketingsafdelinger i private virksomheder, der arbejder...... med surveys. Denne bog gennemgår alle surveyarbejdets faser og giver en praktisk indføring i: • design af undersøgelsen og udvælgelse af stikprøver, • formulering af spørgeskemaer samt indsamling og kodning af data, • metoder til at analysere resultaterne...

  14. The LEGUE high latitude bright survey design for the LAMOST pilot survey

    Institute of Scientific and Technical Information of China (English)

    Yue-Yang Zhang; Shuang Gao; Norbert Christlieb; Zhan-Wen Han; Jin-Liang Hou; Hsu-Tai Lee; Xiao-Wei Liu; Kai-Ke Pan; Hong-Chi Wang; Jeffrey L.Carlin; Fan Yang; Chao Liu; Li-Cai Deng; Heidi Jo Newberg; Hao-Tong Zhang; Sébastien Lépine; Yan Xu

    2012-01-01

    We describe the footprint and input catalog for bright nights in the LAMOST Pilot Survey,which began in October 2011.Targets are selected from two stripes in the north and south Galactic Cap regions,centered at δ =29°,with 10° width in declination,covering right ascensions of 135°to 290°and-30°to 30°respectively.We selected spectroscopic targets from a combination of the SDSS and 2MASS point source catalogs.The catalog of stars defining the field centers(as required by the Shack-Hartmann wavefront sensor at the center of the LAMOST field)consists of all V < 8m stars from the Hipparcos catalog.We employ a statistical selection algorithm that assigns priorities to targets based on their positions in multidimensional color/magnitude space.This scheme overemphasizes rare objects and de-emphasizes more populated regions of magnitude and color phase space,while ensuring a smooth,well-understood selection function.A demonstration of plate design is presented based on the Shack-Hartmann star catalog and an input catalog that was generated by our target selection routines.

  15. The DEEP2 Galaxy Redshift Survey: Design, Observations, Data Reduction, and Redshifts

    Science.gov (United States)

    Newman, Jeffrey A.; Cooper, Michael C.; Davis, Marc; Faber, S. M.; Coil, Alison L.; Guhathakurta, Puragra; Koo, David C.; Phillips, Andrew C.; Conroy, Charlie; Dutton, Aaron A.; Finkbeiner, Douglas P.; Gerke, Brian F.; Rosario, David J.; Weiner, Benjamin J.; Willmer, C. N. A.; Yan, Renbin; Harker, Justin J.; Kassin, Susan A.; Konidaris, N. P.; Lai, Kamson; Madgwick, Darren S.; Noeske, K. G.; Wirth, Gregory D.; Connolly, A. J.; Kaiser, N.; Kirby, Evan N.; Lemaux, Brian C.; Lin, Lihwai; Lotz, Jennifer M.; Luppino, G. A.; Marinoni, C.; Matthews, Daniel J.; Metevier, Anne; Schiavon, Ricardo P.

    2013-09-01

    We describe the design and data analysis of the DEEP2 Galaxy Redshift Survey, the densest and largest high-precision redshift survey of galaxies at z ~ 1 completed to date. The survey was designed to conduct a comprehensive census of massive galaxies, their properties, environments, and large-scale structure down to absolute magnitude MB = -20 at z ~ 1 via ~90 nights of observation on the Keck telescope. The survey covers an area of 2.8 deg2 divided into four separate fields observed to a limiting apparent magnitude of R AB = 24.1. Objects with z 0.7 to be targeted ~2.5 times more efficiently than in a purely magnitude-limited sample. Approximately 60% of eligible targets are chosen for spectroscopy, yielding nearly 53,000 spectra and more than 38,000 reliable redshift measurements. Most of the targets that fail to yield secure redshifts are blue objects that lie beyond z ~ 1.45, where the [O II] 3727 Å doublet lies in the infrared. The DEIMOS 1200 line mm-1 grating used for the survey delivers high spectral resolution (R ~ 6000), accurate and secure redshifts, and unique internal kinematic information. Extensive ancillary data are available in the DEEP2 fields, particularly in the Extended Groth Strip, which has evolved into one of the richest multiwavelength regions on the sky. This paper is intended as a handbook for users of the DEEP2 Data Release 4, which includes all DEEP2 spectra and redshifts, as well as for the DEEP2 DEIMOS data reduction pipelines. Extensive details are provided on object selection, mask design, biases in target selection and redshift measurements, the spec2d two-dimensional data-reduction pipeline, the spec1d automated redshift pipeline, and the zspec visual redshift verification process, along with examples of instrumental signatures or other artifacts that in some cases remain after data reduction. Redshift errors and catastrophic failure rates are assessed through more than 2000 objects with duplicate observations. Sky subtraction is

  16. THE DEEP2 GALAXY REDSHIFT SURVEY: DESIGN, OBSERVATIONS, DATA REDUCTION, AND REDSHIFTS

    Energy Technology Data Exchange (ETDEWEB)

    Newman, Jeffrey A. [Department of Physics and Astronomy, University of Pittsburgh, Pittsburgh, PA 15260 (United States); Cooper, Michael C. [Center for Galaxy Evolution, Department of Physics and Astronomy, University of California, Irvine, 4129 Frederick Reines Hall, Irvine, CA 92697 (United States); Davis, Marc [Department of Astronomy and Physics, University of California, 601 Campbell Hall, Berkeley, CA 94720 (United States); Faber, S. M.; Guhathakurta, Puragra; Koo, David C.; Phillips, Andrew C.; Conroy, Charlie; Harker, Justin J.; Lai, Kamson [UCO/Lick Observatory, University of California, 1156 High Street, Santa Cruz, CA 95064 (United States); Coil, Alison L. [Department of Physics, University of California, San Diego, La Jolla, CA 92093 (United States); Dutton, Aaron A. [Max Planck Institute for Astronomy, Koenigstuhl 17, D-69117 Heidelberg (Germany); Finkbeiner, Douglas P. [Harvard-Smithsonian Center for Astrophysics, Harvard University, 60 Garden St., Cambridge, MA 02138 (United States); Gerke, Brian F. [Lawrence Berkeley National Laboratory, 1 Cyclotron Rd., MS 90R4000, Berkeley, CA 94720 (United States); Rosario, David J. [Max-Planck-Institut fuer Extraterrestrische Physik, Giessenbachstrasse, D-85748 Garching (Germany); Weiner, Benjamin J.; Willmer, C. N. A. [Steward Observatory, University of Arizona, 933 N. Cherry Ave., Tucson, AZ 85721-0065 (United States); Yan Renbin [Department of Physics and Astronomy, University of Kentucky, 505 Rose Street, Lexington, KY 40506-0055 (United States); Kassin, Susan A. [Astrophysics Science Division, Goddard Space Flight Center, Code 665, Greenbelt, MD 20771 (United States); Konidaris, N. P., E-mail: janewman@pitt.edu, E-mail: djm70@pitt.edu, E-mail: m.cooper@uci.edu, E-mail: mdavis@berkeley.edu, E-mail: faber@ucolick.org, E-mail: koo@ucolick.org, E-mail: raja@ucolick.org, E-mail: phillips@ucolick.org [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); and others

    2013-09-15

    We describe the design and data analysis of the DEEP2 Galaxy Redshift Survey, the densest and largest high-precision redshift survey of galaxies at z {approx} 1 completed to date. The survey was designed to conduct a comprehensive census of massive galaxies, their properties, environments, and large-scale structure down to absolute magnitude M{sub B} = -20 at z {approx} 1 via {approx}90 nights of observation on the Keck telescope. The survey covers an area of 2.8 deg{sup 2} divided into four separate fields observed to a limiting apparent magnitude of R{sub AB} = 24.1. Objects with z {approx}< 0.7 are readily identifiable using BRI photometry and rejected in three of the four DEEP2 fields, allowing galaxies with z > 0.7 to be targeted {approx}2.5 times more efficiently than in a purely magnitude-limited sample. Approximately 60% of eligible targets are chosen for spectroscopy, yielding nearly 53,000 spectra and more than 38,000 reliable redshift measurements. Most of the targets that fail to yield secure redshifts are blue objects that lie beyond z {approx} 1.45, where the [O II] 3727 A doublet lies in the infrared. The DEIMOS 1200 line mm{sup -1} grating used for the survey delivers high spectral resolution (R {approx} 6000), accurate and secure redshifts, and unique internal kinematic information. Extensive ancillary data are available in the DEEP2 fields, particularly in the Extended Groth Strip, which has evolved into one of the richest multiwavelength regions on the sky. This paper is intended as a handbook for users of the DEEP2 Data Release 4, which includes all DEEP2 spectra and redshifts, as well as for the DEEP2 DEIMOS data reduction pipelines. Extensive details are provided on object selection, mask design, biases in target selection and redshift measurements, the spec2d two-dimensional data-reduction pipeline, the spec1d automated redshift pipeline, and the zspec visual redshift verification process, along with examples of instrumental signatures or

  17. The DEEP2 Galaxy Redshift Survey: Design, Observations, Data Reduction, and Redshifts

    Science.gov (United States)

    Newman, Jeffrey A.; Cooper, Michael C.; Davis, Marc; Faber, S. M.; Coil, Alison L; Guhathakurta, Puraga; Koo, David C.; Phillips, Andrew C.; Conroy, Charlie; Dutton, Aaron A.; Finkbeiner, Douglas P.; Gerke, Brian F.; Rosario, David J.; Weiner, Benjamin J.; Wilmer, C. N. A.; Yan, Renbin; Harker, Justin J.; Kassin, Susan A.; Konidaris, N. P.; Lai, Kamson; Madgwick, Darren S.; Noeske, K. G.; Wirth, Gregory D.; Kirby, Evan N.; Lotz, Jennifer M.

    2013-01-01

    We describe the design and data analysis of the DEEP2 Galaxy Redshift Survey, the densest and largest high-precision redshift survey of galaxies at z approx. 1 completed to date. The survey was designed to conduct a comprehensive census of massive galaxies, their properties, environments, and large-scale structure down to absolute magnitude MB = -20 at z approx. 1 via approx.90 nights of observation on the Keck telescope. The survey covers an area of 2.8 Sq. deg divided into four separate fields observed to a limiting apparent magnitude of R(sub AB) = 24.1. Objects with z approx. galaxies with z > 0.7 to be targeted approx. 2.5 times more efficiently than in a purely magnitude-limited sample. Approximately 60% of eligible targets are chosen for spectroscopy, yielding nearly 53,000 spectra and more than 38,000 reliable redshift measurements. Most of the targets that fail to yield secure redshifts are blue objects that lie beyond z approx. 1.45, where the [O ii] 3727 Ang. doublet lies in the infrared. The DEIMOS 1200 line mm(exp -1) grating used for the survey delivers high spectral resolution (R approx. 6000), accurate and secure redshifts, and unique internal kinematic information. Extensive ancillary data are available in the DEEP2 fields, particularly in the Extended Groth Strip, which has evolved into one of the richest multiwavelength regions on the sky. This paper is intended as a handbook for users of the DEEP2 Data Release 4, which includes all DEEP2 spectra and redshifts, as well as for the DEEP2 DEIMOS data reduction pipelines. Extensive details are provided on object selection, mask design, biases in target selection and redshift measurements, the spec2d two-dimensional data-reduction pipeline, the spec1d automated redshift pipeline, and the zspec visual redshift verification process, along with examples of instrumental signatures or other artifacts that in some cases remain after data reduction. Redshift errors and catastrophic failure rates are assessed

  18. Combinatorial instruments in the design of a heuristic for the quadratic assignment problem

    Directory of Open Access Journals (Sweden)

    Paulo Oswaldo Boaventura-Netto

    2003-12-01

    Full Text Available This work discusses the use of a neighbouring structure in the design of specific heuristics for the Quadratic Assignment Problem (QAP. This structure is formed by the 4- and 6-cycles adjacent to a vertex in the Hasse diagram of the permutation lattice and it can be adequately partitioned in subsets of linear and quadratic cardinalities, a characteristics which frequently allows an economy in the processing time. We propose also a restart strategy and a mechanism for generating initial solutions which constitute, together with the neighbouring structure, a possible QAP-specific heuristic proposal. For the construction of these instruments we used the relaxed ordered set of QAP solutions.Este trabalho discute o uso de uma estrutura de vizinhança em heurísticas específicas para o Problema Quadrático de Alocação (PQA. Esta estrutura envolve os ciclos de comprimento 4 e 6 adjacentes a um vértice do diagrama de Hasse do reticulado das permutações e pode ser particionada em subconjuntos de cardinalidade linear e quadrática em relação à ordem da instância, o que permite frequentemente uma economia de tempo de processamento. Propõem-se ainda uma estratégia de repartida e um mecanismo de geração de soluções iniciais, que constituem, ao lado da estrutura de vizinhança, uma proposta de heurística específica para o PQA. Na construção desses instrumentos foi utilizada a noção de conjunto relaxado ordenado das soluções do PQA.

  19. Design and Implementation of Electric Steering Gear Inspection System for Unmanned Aerial Vehicles Based on Virtual Instruments

    Directory of Open Access Journals (Sweden)

    Zheng Xing

    2016-01-01

    Full Text Available A kind of UAV electric servo detection system based on Virtual Instrument is designed in this paper, including the hardware platform based on PC-DAQ virtual instrument architecture and the software platform based on LabVIEW function, structure and system implementation methods. The function, structure and system implementation method of software platform is also described. The gear limits checking, zero testing, time domain characteristics test results showed that the system achieves testing requirements well, and can complete detection of electric steering gear automatically, fast, easy and accurate.

  20. GEO-CAPE Coastal Ecosystem Dynamics Imager (COEDI) Instrument Design Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of this study is to build a breadboard spectrometer and prove the functionality of the optical-mechanical assembly for the COEDI instrument concept. ...

  1. The design of an instrument to evaluate software for EFL/ESL pronunciation teaching

    Directory of Open Access Journals (Sweden)

    Cristiana Gomes de Freitas Menezes Martins

    2016-01-01

    Full Text Available http://dx.doi.org/10.5007/2175-8026.2016v69n1p141 The purpose of this study was to develop and test the reliability and validity of an instrument to evaluate the extent to which software programs teach English as a Foreign Language and/or Second Language (EFL/ESL pronunciation following the principles of the Communicative Approach (Celce-Murcia et al, 2010, thus having the potential to develop English pronunciation. After the development of the instrument, 46 EFL/ESL teachers used it to analyze an online version of the software program Pronunciation Power 2. The responses of the participants were submitted to statistical analysis and the validity and reliability of the instrument were tested. The good reliability indexes obtained in this study suggest the instrument has some degree of validity for evaluating how well an ESL/EFL pronunciation teaching software program potentially develops English pronunciation.

  2. Survey design research: a tool for answering nursing research questions.

    Science.gov (United States)

    Siedlecki, Sandra L; Butler, Robert S; Burchill, Christian N

    2015-01-01

    The clinical nurse specialist is in a unique position to identify and study clinical problems in need of answers, but lack of time and resources may discourage nurses from conducting research. However, some research methods can be used by the clinical nurse specialist that are not time-intensive or cost prohibitive. The purpose of this article is to explain the utility of survey methodology for answering a number of nursing research questions. The article covers survey content, reliability and validity issues, sample size considerations, and methods of survey delivery.

  3. SAS procedures for designing and analyzing sample surveys

    Science.gov (United States)

    Stafford, Joshua D.; Reinecke, Kenneth J.; Kaminski, Richard M.

    2003-01-01

    Complex surveys often are necessary to estimate occurrence (or distribution), density, and abundance of plants and animals for purposes of re-search and conservation. Most scientists are familiar with simple random sampling, where sample units are selected from a population of interest (sampling frame) with equal probability. However, the goal of ecological surveys often is to make inferences about populations over large or complex spatial areas where organisms are not homogeneously distributed or sampling frames are in-convenient or impossible to construct. Candidate sampling strategies for such complex surveys include stratified,multistage, and adaptive sampling (Thompson 1992, Buckland 1994).

  4. Evaluation of the Total Design Method in a survey of Japanese dentists

    OpenAIRE

    Ishihara Chikako; Yoshida Toshiko; Milgrom Peter; Nakai Yukie; Shimono Tsutomu

    2005-01-01

    Abstract Background This study assessed the application of the Total Design Method (TDM) in a mail survey of Japanese dentists. The TDM was chosen because survey response rates in Japan are unacceptably low and the TDM had previously been used in a general population survey. Methods Four hundred and seventy eight dentist members of the Okayama Medical and Dental Practitioner's Association were surveyed. The nine-page, 27-item questionnaire covered dentist job satisfaction, physical practice, ...

  5. Design Evolution of the Wide Field Infrared Survey Telescope Using Astrophysics Focused Telescope Assets (WFIRST-AFTA) and Lessons Learned

    Science.gov (United States)

    Peabody, Hume L.; Peters, Carlton V.; Rodriguez-Ruiz, Juan E.; McDonald, Carson S.; Content, David A.; Jackson, Clifton E.

    2015-01-01

    The design of the Wide Field Infrared Survey Telescope using Astrophysics Focused Telescope Assets (WFIRST-AFTA) continues to evolve as each design cycle is analyzed. In 2012, two Hubble sized (2.4 m diameter) telescopes were donated to NASA from elsewhere in the Federal Government. NASA began investigating potential uses for these telescopes and identified WFIRST as a mission to benefit from these assets. With an updated, deeper, and sharper field of view than previous design iterations with a smaller telescope, the optical designs of the WFIRST instruments were updated and the mechanical and thermal designs evolved around the new optical layout. Beginning with Design Cycle 3, significant analysis efforts yielded a design and model that could be evaluated for Structural-Thermal-Optical-Performance (STOP) purposes for the Wide Field Imager (WFI) and provided the basis for evaluating the high level observatory requirements. Development of the Cycle 3 thermal model provided some valuable analysis lessons learned and established best practices for future design cycles. However, the Cycle 3 design did include some major liens and evolving requirements which were addressed in the Cycle 4 Design. Some of the design changes are driven by requirements changes, while others are optimizations or solutions to liens from previous cycles. Again in Cycle 4, STOP analysis was performed and further insights into the overall design were gained leading to the Cycle 5 design effort currently underway. This paper seeks to capture the thermal design evolution, with focus on major design drivers, key decisions and their rationale, and lessons learned as the design evolved.

  6. Analysing the interactions between renewable energy promotion and energy efficiency support schemes: The impact of different instruments and design elements

    Energy Technology Data Exchange (ETDEWEB)

    Rio, Pablo del, E-mail: pablo.delrio@cchs.csic.e [Instituto de Politicas y Bienes Publicos, Consejo Superior de Investigaciones Cientificas (CSIC), C/Albasanz 26-28, 28037 Madrid (Spain)

    2010-09-15

    CO{sub 2} emissions reduction, renewable energy deployment and energy efficiency are three main energy/environmental goals, particularly in Europe. Their relevance has led to the implementation of support schemes in these realms. Their coexistence may lead to overlaps, synergies and conflicts between them. The aim of this paper is to analyse the interactions between energy efficiency measures and renewable energy promotion, whereas previous analyses have focused on the interactions between emissions trading schemes (ETS) and energy efficiency measures and ETS and renewable energy promotion schemes. Furthermore, the analysis in this paper transcends the 'certificate' debate (i.e., tradable green and white certificates) and considers other instruments, particularly feed-in tariffs for renewable electricity. The goal is to identify positive and negative interactions between energy efficiency and renewable electricity promotion and to assess whether the choice of specific instruments and design elements within those instruments affects the results of the interactions.

  7. Analysing the interactions between renewable energy promotion and energy efficiency support schemes. The impact of different instruments and design elements

    Energy Technology Data Exchange (ETDEWEB)

    Del Rio, Pablo [Instituto de Politicas y Bienes Publicos, Consejo Superior de Investigaciones Cientificas (CSIC), C/Albasanz 26-28, 28037 Madrid (Spain)

    2010-09-15

    CO{sub 2} emissions reduction, renewable energy deployment and energy efficiency are three main energy/environmental goals, particularly in Europe. Their relevance has led to the implementation of support schemes in these realms. Their coexistence may lead to overlaps, synergies and conflicts between them. The aim of this paper is to analyse the interactions between energy efficiency measures and renewable energy promotion, whereas previous analyses have focused on the interactions between emissions trading schemes (ETS) and energy efficiency measures and ETS and renewable energy promotion schemes. Furthermore, the analysis in this paper transcends the certificate debate (i.e., tradable green and white certificates) and considers other instruments, particularly feed-in tariffs for renewable electricity. The goal is to identify positive and negative interactions between energy efficiency and renewable electricity promotion and to assess whether the choice of specific instruments and design elements within those instruments affects the results of the interactions. (author)

  8. Design and Ground Calibration of the Helioseismic and Magnetic Imager (HMI) Instrument on the Solar Dynamics Observatory (SDO)

    Science.gov (United States)

    Schou, J.; Scherrer, P. H.; Bush, R. I.; Wachter, R.; Couvidat, S.; Rabello-Soares, M. C.; Bogart, R. S.; Hoeksema, J. T.; Liu, Y.; Duvall, T. L., Jr.; Akin, D. J.; Allard, B. A.; Miles, J. W.; Rairden, R.; Shine, R. A.; Tarbell, T. D.; Title, A. M.; Wolfson, C. J.; Elmore, D. F.; Norton, A. A..; Tomczyk, S.

    2012-01-01

    The Helioseismic and Magnetic Imager (HMI) investigation will study the solar interior using helioseismic techniques as well as the magnetic field near the solar surface. The HMI instrument is part of the Solar Dynamics Observatory (SDO) that was launched on 11 February 2010. The instrument is designed to measure the Doppler shift, intensity, and vector magnetic field at the solar photosphere using the 6173 Fe I absorption line. The instrument consists of a front-window filter, a telescope, a set of wave plates for polarimetry, an image-stabilization system, a blocking filter, a five-stage Lyot filter with one tunable element, two wide-field tunable Michelson interferometers, a pair of 4096(exo 2) pixel cameras with independent shutters, and associated electronics. Each camera takes a full-disk image roughly every 3.75 seconds giving an overall cadence of 45 seconds for the Doppler, intensity, and line-of-sight magnetic-field measurements and a slower cadence for the full vector magnetic field. This article describes the design of the HMI instrument and provides an overview of the pre-launch calibration efforts. Overviews of the investigation, details of the calibrations, data handling, and the science analysis are provided in accompanying articles.

  9. Ceramic end seal design for high temperature high voltage nuclear instrumentation cables

    Science.gov (United States)

    Meiss, James D.; Cannon, Collins P.

    1979-01-01

    A coaxial, hermetically sealed end structure is described for electrical instrumentation cables. A generally tubular ceramic body is hermetically sealed within a tubular sheath which is in turn sealed to the cable sheath. One end of the elongated tubular ceramic insulator is sealed to a metal end cap. The other end of the elongated tubular insulator has an end surface which is shaped concave relative to a central conductor which extends out of this end surface. When the end seal is hermetically sealed to an instrumentation cable device and the central conductor is maintained at a high positive potential relative to the tubular metal sheath, the electric field between the central conductor and the outer sheath tends to collect electrons from the concave end surface of the insulator. This minimizes breakdown pulse noise generation when instrumentation potentials are applied to the central conductor.

  10. Applications of numerical optimization methods to helicopter design problems - A survey

    Science.gov (United States)

    Miura, H.

    1985-01-01

    A survey of applications of mathematical programming methods is used to improve the design of helicopters and their components. Applications of multivariable search techniques in the finite dimensional space are considered. Five categories of helicopter design problems are considered: (1) conceptual and preliminary design, (2) rotor-system design, (3) airframe structures design, (4) control system design, and (5) flight trajectory planning. Key technical progress in numerical optimization methods relevant to rotorcraft applications are summarized.

  11. Applications of numerical optimization methods to helicopter design problems: A survey

    Science.gov (United States)

    Miura, H.

    1984-01-01

    A survey of applications of mathematical programming methods is used to improve the design of helicopters and their components. Applications of multivariable search techniques in the finite dimensional space are considered. Five categories of helicopter design problems are considered: (1) conceptual and preliminary design, (2) rotor-system design, (3) airframe structures design, (4) control system design, and (5) flight trajectory planning. Key technical progress in numerical optimization methods relevant to rotorcraft applications are summarized.

  12. A Survey of Research on Service-Spacecraft Orbit Design

    Institute of Scientific and Technical Information of China (English)

    LI Yue; ZHANG Jian-xin; ZHANG Qiang; WEI Xiao-peng

    2013-01-01

    On-orbit service spacecraft orbit problem has been addressed for decades. The research of on-orbit service spacecraft orbit can be roughly divided into orbit design and orbit optimization. The paper mainly focuses on the orbit design problem. We simply summarize of the previous works, and point out the main content of the on-orbit service spacecraft orbit design. We classify current on-orbit service spacecraft orbit design problem into parking-orbit design, maneuvering-orbit design and servicing-orbit design. Then, we give a detail description of the three specific orbits, and put forward our own ideas on the existed achievements. The paper will provide a meaningful reference for the on-orbit service spacecraft orbital design research.

  13. Design techniques for developing a computerized instrumentation test plan. [for wind tunnel test data acquisition system

    Science.gov (United States)

    Burnett, S. Kay; Forsyth, Theodore J.; Maynard, Everett E.

    1987-01-01

    The development of a computerized instrumentation test plan (ITP) for the NASA/Ames Research Center National Full Scale Aerodynamics Complex (NFAC) is discussed. The objective of the ITP program was to aid the instrumentation engineer in documenting the configuration and calibration of data acquisition systems for a given test at any of four low speed wind tunnel facilities (Outdoor Aerodynamic Research Facility, 7 x 10, 40 x 80, and 80 x 120) at the NFAC. It is noted that automation of the ITP has decreased errors, engineering hours, and setup time while adding a higher level of consistency and traceability.

  14. Ergonomic Based Design and Survey of Elementary School Furniture

    Science.gov (United States)

    Maheshwar; Jawalkar, Chandrashekhar S.

    2014-01-01

    This paper presents the ergonomic aspects in designing and prototyping of desks cum chairs used in elementary schools. The procedures adopted for the assessment included: the study of existing school furniture, design analysis and development of prototypes. The design approach proposed a series of adjustable desks and chairs developed in terms of…

  15. Understanding envelope design: Survey about architectural practice and building performance

    NARCIS (Netherlands)

    Venancio, R.; Pedrini, A.; Van der Linden, A.C.; Van den Ham, E.R.; Stouffs, R.M.F.

    2011-01-01

    This paper is part of a research that aims to develop simulation methods to support the architectural design practice. To do that, we need to understand how envelope design decisions are taken, which methods are more frequently used and which design definitions are relevant to take specific decision

  16. A self-designed instrument to evaluate cavosurface angle for class I amalgam cavity preparation: A learning aid.

    Science.gov (United States)

    Arora, Ankit; Acharya, Shashi Rashmi; Ballal, Vasudev; Sharma, Padmaja

    2012-07-01

    Fighting the controversies, amalgam, as a posterior restorative material has survived till date. The fate of amalgam restoration is determined by geometry of the cavity preparation and cavosurface angle is one integral part of the cavity, which decides the marginal characteristics of the restoration and health of the tooth. Low edge strength of amalgam highlights the importance of cavosurface angle. However, at the same time conservation of the tooth also should be considered. This article presents a self-designed instrument to evaluate and obtain a cavosurface angle close to 110°. The design of the instrument also helps in evaluating parameters, such as depth of the cavity, undercut angle, and allows finishing of the buccal or lingual walls.

  17. The DEEP2 Galaxy Redshift Survey: Design, Observations, Data Reduction, and Redshifts

    OpenAIRE

    Newman, Jeffrey A.; Kassin, Susan A.; Noeske, K. G.; Lotz, Jennifer M.

    2013-01-01

    We describe the design and data analysis of the DEEP2 Galaxy Redshift Survey, the densest and largest high-precision redshift survey of galaxies at z ~ 1 completed to date. The survey was designed to conduct a comprehensive census of massive galaxies, their properties, environments, and large-scale structure down to absolute magnitude M_B = −20 at z ~ 1 via ~90 nights of observation on the Keck telescope. The survey covers an area of 2.8 deg^2 divided into four separate fields observed to a l...

  18. Economic instruments and clean water: Why institutions and policy design matter

    DEFF Research Database (Denmark)

    Andersen, Mikael Skou

    2001-01-01

    Since market-like policy instruments are usually applied within existing rules, institutions, and policy processes, the policy and administrative contexts in which they operate become important. These contexts are quite different from country to country, often more so than policymakers are aware ...

  19. The Mid-Infrared Instrument for the James Webb Space Telescope, II: Design and Build

    DEFF Research Database (Denmark)

    Wright, G. S.; Wright, David; Goodson, G. B.

    2015-01-01

    The Mid-InfraRed Instrument (MIRI) on the James Webb Space Telescope (JWST) provides measurements over the wavelength range 5 to 28: 5 µm. MIRI has, within a single "package," four key scientific functions: photometric imaging, coronagraphy, single-source low-spectral resolving power (R similar...

  20. Economic instruments and clean water: Why institutions and policy design matter

    DEFF Research Database (Denmark)

    Andersen, Mikael Skou

    1994-01-01

    Since market-like policy instruments are usually applied within existing rules, institutions, and policy processes, the policy and administrative contexts in which they operate become important. These contexts are quite different from country to country, often more so than policymakers are aware of...

  1. Incorporating Students' Self-Designed, Research-Based Analytical Chemistry Projects into the Instrumentation Curriculum

    Science.gov (United States)

    Gao, Ruomei

    2015-01-01

    In a typical chemistry instrumentation laboratory, students learn analytical techniques through a well-developed procedure. Such an approach, however, does not engage students in a creative endeavor. To foster the intrinsic motivation of students' desire to learn, improve their confidence in self-directed learning activities and enhance their…

  2. The Mid-Infrared Instrument for the James Webb Space Telescope, II: Design and Build

    NARCIS (Netherlands)

    Wright, G. S.; Wright, David; Goodson, G. B.; Rieke, G. H.; Aitink-Kroes, Gabby; Amiaux, J.; Aricha-Yanguas, Ana; Azzollini, Ruymán; Banks, Kimberly; Barrado-Navascues, D.; Belenguer-Davila, T.; Bloemmart, J. A. D. L.; Bouchet, Patrice; Brandl, B. R.; Colina, L.; Detre, Örs; Diaz-Catala, Eva; Eccleston, Paul; Friedman, Scott D.; García-Marín, Macarena; Güdel, Manuel; Glasse, Alistair; Glauser, Adrian M.; Greene, T. P.; Groezinger, Uli; Grundy, Tim; Hastings, Peter; Henning, Th.; Hofferbert, Ralph; Hunter, Faye; Jessen, N. C.; Justtanont, K.; Karnik, Avinash R.; Khorrami, Mori A.; Krause, Oliver; Labiano, Alvaro; Lagage, P.-O.; Langer, Ulrich; Lemke, Dietrich; Lim, Tanya; Lorenzo-Alvarez, Jose; Mazy, Emmanuel; McGowan, Norman; Meixner, M. E.; Morris, Nigel; Morrison, Jane E.; Müller, Friedrich; rgaard-Nielson, H.-U. Nø; Olofsson, Göran; O'Sullivan, Brian; Pel, J.-W.; Penanen, Konstantin; Petach, M. B.; Pye, J. P.; Ray, T. P.; Renotte, Etienne; Renouf, Ian; Ressler, M. E.; Samara-Ratna, Piyal; Scheithauer, Silvia; Schneider, Analyn; Shaughnessy, Bryan; Stevenson, Tim; Sukhatme, Kalyani; Swinyard, Bruce; Sykes, Jon; Thatcher, John; Tikkanen, Tuomo; van Dishoeck, E. F.; Waelkens, C.; Walker, Helen; Wells, Martyn; Zhender, Alex

    2015-01-01

    The Mid-InfraRed Instrument (MIRI) on the James Webb Space Telescope (JWST) provides measurements over the wavelength range 5 to 28.5 μm. MIRI has, within a single "package," four key scientific functions: photometric imaging, coronagraphy, single-source low-spectral resolving power (R ~ 100) spectr

  3. The Cabauw Intercomparison campaign for Nitrogen Dioxide measuring Instruments (CINDI: design, execution, and early results

    Directory of Open Access Journals (Sweden)

    A. J. M. Piters

    2012-02-01

    Full Text Available From June to July 2009 more than thirty different in-situ and remote sensing instruments from all over the world participated in the Cabauw Intercomparison campaign for Nitrogen Dioxide measuring Instruments (CINDI. The campaign took place at KNMI's Cabauw Experimental Site for Atmospheric Research (CESAR in the Netherlands. Its main objectives were to determine the accuracy of state-of-the-art ground-based measurement techniques for the detection of atmospheric nitrogen dioxide (both in-situ and remote sensing, and to investigate their usability in satellite data validation. The expected outcomes are recommendations regarding the operation and calibration of such instruments, retrieval settings, and observation strategies for the use in ground-based networks for air quality monitoring and satellite data validation. Twenty-four optical spectrometers participated in the campaign, of which twenty-one had the capability to scan different elevation angles consecutively, the so-called Multi-axis DOAS systems, thereby collecting vertical profile information, in particular for nitrogen dioxide and aerosol. Various in-situ samplers and lidar instruments simultaneously characterized the variability of atmospheric trace gases and the physical properties of aerosol particles. A large data set of continuous measurements of these atmospheric constituents has been collected under various meteorological conditions and air pollution levels. Together with the permanent measurement capability at the CESAR site characterizing the meteorological state of the atmosphere, the CINDI campaign provided a comprehensive observational data set of atmospheric constituents in a highly polluted region of the world during summertime. First detailed comparisons performed with the CINDI data show that slant column measurements of NO2, O4 and HCHO with MAX-DOAS agree within 5 to 15%, vertical profiles of NO2 derived from several independent

  4. Results of a healthcare worker (HCW) survey on environmental awareness as an instrument for the preparation of an environmental report for the University Medicine Greifswald.

    Science.gov (United States)

    Heiden, Jens-Uwe; Kramer, Axel; Bornewasser, Manfred; Lemanski, Sandra; Below, Harald

    2011-01-01

    Environmental reporting is increasingly important for medical facilities. Currently, hospitals can determine the content of an environmental report as they see fit. To examine the utility and scope of an employee survey as an instrument for the preparation of an environmental report at the University Hospital Greifswald. For this purpose a questionnaire was developed with a focus on environmental behaviour and the significance attached to the protection of the environment. The employees of the University Medicine Greifswald attach an unexpectedly high significance to the protection of the environment. Based on this finding, this potential should be used to promote the optimal implementation of ecological-economic behaviour within the University Medicine. An employee survey is a useful instrument in the preparation of an environmental report.

  5. Morphological methods for design of modular systems (a survey)

    CERN Document Server

    Levin, Mark Sh

    2012-01-01

    The article addresses morphological approaches to design of modular systems. The following methods are briefly described: (i) basic version of morphological analysis (MA), (ii) modification of MA as method of closeness to ideal point(s), (iii reducing of MA to linear programming, (iv) multiple choice problem, (v) quadratic assignment problem, (vi) Pareto-based MA (i.e., revelation of Pareto-efficient solutions), (vii) Hierarchical Morphological Multicriteria Design (HMMD) approach, and (viii) Hierarchical Morphological Multicriteria Design (HMMD) approach based on fuzzy estimates. The above-mentioned methods are illustrated by schemes, models, and illustrative examples. An additional realistic example (design of GSM network) is presented to illustrate main considered methods.

  6. Evaluation of the two non-consecutive 24-h recall instrument for pan-European food consumption surveys

    NARCIS (Netherlands)

    Crispim, S.P.

    2011-01-01

    Background: The comparability of food consumption data originating from national nutritional surveys in Europe is currently hampered because of different methodologies used. Therefore, experts in the European Food Consumption Survey Method (EFCOSUM) consortium proposed to use two non-consecutive

  7. SKALA, a log-periodic array antenna for the SKA-low instrument: design, simulations, tests and system considerations

    CERN Document Server

    Acedo, E de Lera; Troop, N; Drought, N; Faulkner, A J

    2015-01-01

    The very demanding requirements of the SKA-low instrument call for a challenging antenna design capable of delivering excellence performance in radiation patterns, impedance matching, polarization purity, cost, longevity, etc. This paper is devoted to the development (design and test of first prototypes) of an active ultra-wideband antenna element for the low-frequency instrument of the SKA radio telescope. The antenna element and differential low noise amplifier described here were originally designed to cover the former SKA-low band (70-450MHz) but it is now aimed to cover the re-defined SKA-low band (50-350MHz) and furthermore the antenna is capable of performing up to 650MHz with the current design. The design is focused on maximum sensitivity in a wide field of view (+/- 45deg from zenith) and low cross-polarization ratios. Furthermore, the size and cost of the element has to be kept to a minimum as millions of these antennas will need to be deployed for the full SKA in very compact configurations. The p...

  8. Health-related quality of life after TBI: a systematic review of study design, instruments, measurement properties, and outcome.

    Science.gov (United States)

    Polinder, Suzanne; Haagsma, Juanita A; van Klaveren, David; Steyerberg, Ewout W; van Beeck, Ed F

    2015-01-01

    Measurement of health-related quality of life (HRQL) is essential to quantify the subjective burden of traumatic brain injury (TBI) in survivors. We performed a systematic review of HRQL studies in TBI to evaluate study design, instruments used, methodological quality, and outcome. Fifty-eight studies were included, showing large variation in HRQL instruments and assessment time points used. The Short Form-36 (SF-36) was most frequently used. A high prevalence of health problems during and after the first year of TBI was a common finding of the studies included. In the long term, patients with a TBI still showed large deficits from full recovery compared to population norms. Positive results for internal consistency and interpretability of the SF-36 were reported in validity studies. The Quality of Life after Brain Injury instrument (QOLIBRI), European Brain Injury Questionnaire (EBIQ), Child Health Questionnaire (CHQ), and the World Health Organization Quality of Life short version (WHOQOL-BREF) showed positive results, but evidence was limited. Meta-analysis of SF-36 showed that TBI outcome is heterogeneous, encompassing a broad spectrum of HRQL, with most problems reported in the physical, emotional, and social functioning domain. The use of SF-36 in combination with a TBI-specific instrument, i.e., QOLIBRI, seems promising. Consensus on preferred methodologies of HRQL measurement in TBI would facilitate comparability across studies, resulting in improved insights in recovery patterns and better estimates of the burden of TBI.

  9. Hardware and software design for a National Instrument-based magnetic induction tomography system for prospective biomedical applications.

    Science.gov (United States)

    Wei, Hsin-Yu; Soleimani, Manuchehr

    2012-05-01

    Magnetic induction tomography (MIT) is a new and emerging type of tomography technique that is able to map the passive electromagnetic properties (in particular conductivity) of an object. Excitation coils are used to induce eddy currents in the medium, and the magnetic field produced by the induced eddy current is then sensed by the receiver coils. Because of its non-invasive and contactless feature, it becomes an attractive technique for many applications (especially in biomedical area) compared to traditional contact electrode-based electrical impedance tomography. Due to the low contrast in conductivity between biological tissues, an accurate and stable hardware system is necessary. Most MIT systems in the literature employ external signal generators, power amplifiers and highly stable down-conversion electronics to obtain a satisfactory phase measurement. However, this would increase design complexity substantially. In this paper, a National Instrument-based MIT system is developed at the University of Bath, aiming for biomedical applications. The system utilizes National Instrument products to accomplish all signal driving, switching and data acquisition tasks, which ease the system design whilst providing satisfactory performance. This paper presents a full-scaled medical MIT system, from the sensor and system hardware design, eddy current model verification to the image reconstruction software: the performance of this MIT instrumentation system is characterized in detail, including the system accuracy and system stability. The methods of solving eddy current problem are presented. The reconstructed images of detecting the presence of saline solutions are also included in this paper, which show the capability of national instrument products to be developed into a full-scaled biomedical MIT system, by demonstrating the practical experimental results.

  10. Alternative sampling designs and estimators for annual surveys

    Science.gov (United States)

    Paul C. Van Deusen

    2000-01-01

    Annual forest inventory systems in the United States have generally converged on sampling designs that: (1) measure equal proportions of the total number of plots each year; and (2) call for the plots to be systematically dispersed. However, there will inevitably be a need to deviate from the basic design to respond to special requests, natural disasters, and budgetary...

  11. Measurement of the earth radiation balance as an instrument design problem.

    Science.gov (United States)

    Yates, H W

    1977-02-01

    The net radiation balance of the earth is important globally for synoptic scale models and long-term climatic trends. It is important at the mesoscale level because it is a strong driving force on local meteorological phenomena. Both synoptic and mesoscale measurements are possible only from earth orbiting spacecraft, and serious efforts have been made to implement them. They have not achieved sufficient accuracy, precision, and stability to be really meaningful meteorologically. Measuring a small difference between two large numbers-the input to the earth and the earth radiation to space-is quite difficult and compounded by the spectral differences between the two. The instrumental considerations to achieving improvements in net radiation balance are discussed. The ratio of input to outflow, like albedo, is a dimensionless number which is amenable to measurement without recourse to calibrated instruments. If the solar constant is indeed reasonably constant, this ratio, which is more easily measured than an absolute value of either quantity, will be acceptable. Instrument stability, both spectral and absolute, as well as calibration methods and accuracy will be discussed with specific emphasis on estimating how and to what degree they can be improved.

  12. The Large Area Radio Galaxy Evolution Spectroscopic Survey (LARGESS): Survey design, data catalogue and GAMA/WiggleZ spectroscopy

    CERN Document Server

    Ching, John H Y; Croom, Scott M; Johnston, Helen M; Pracy, Michael B; Couch, Warrick J; Hopkins, A M; Jurek, Russell J; Pimbblet, K A

    2016-01-01

    We present the Large Area Radio Galaxy Evolution Spectroscopic Survey (LARGESS), a spectroscopic catalogue of radio sources designed to include the full range of radio AGN populations out to redshift z = 0.8. The catalogue covers roughly 800 square degrees of sky, and provides optical identifications for 19,179 radio sources from the 1.4 GHz Faint Images of the Radio Sky at Twenty-cm (FIRST) survey down to an optical magnitude limit of i_mod < 20.5 in Sloan Digital Sky Survey (SDSS) images. Both galaxies and point-like objects are included, and no colour cuts are applied. In collaboration with the WiggleZ and Galaxy And Mass Assembly (GAMA) spectroscopic survey teams, we have obtained new spectra for over 5,000 objects in the LARGESS sample. Combining these new spectra with data from earlier surveys provides spectroscopic data for 12,329 radio sources in the survey area, of which 10,856 have reliable redshifts. 85% of the LARGESS spectroscopic sample are radio AGN (median redshift z = 0.44), and 15% are ne...

  13. Design and Testing of a Controller for the Martian Atmosphere Pressure and Humidity Instrument DREAMS-P/H

    Science.gov (United States)

    Tapani Nikkanen, Timo; Schmidt, Walter; Genzer, Maria; Harri, Ari-Matti; Haukka, Harri

    2013-04-01

    The European Space Agency (ESA), driven by the goal of performing a soft landing on Mars, is planning to launch the Entry, descent and landing Demonstrator Module (EDM)[1] simultaneously with the Trace Gas Orbiter (TGO) as a part of the ExoMars program towards Mars in 2016. As a secondary objective, the EDM will gather meteorological data and observe the electrical environment of the landing site with its Dust characterisation, Risk assessment, and Environmental Analyser on the Martian Surface (DREAMS). The Finnish Meteorological Institute (FMI) is participating in the project by designing, building and testing a pressure and a humidity instrument for Mars, named DREAMS-P and DREAMS-H, respectively. The instruments are based on previous FMI designs, including ones flown on board the Huygens, Phoenix and Mars Science Laboratory.[2] Traditionally, the FMI pressure and humidity instruments have been controlled by an FPGA. However, the need to incorporate more autonomy and modifiability into instruments, cut the development time and component costs, stimulated interest to study a Commercial Off-The-Shelf (COTS) Microcontroller Unit (MCU) based instrument design. Thus, in the DREAMS-P/H design, an automotive MCU is used as the instrument controller. The MCU has been qualified for space by tests in and outside FMI. The DREAMS-P/H controller command and data interface utilizes a RS-422 connection to receive telecommands from and to transmit data to the Central Electronics Unit (CEU) of the DREAMS science package. The two pressure transducers of DREAMS-P and one humidity transducer of DREAMS-H are controlled by a single MCU. The MCU controls the power flow for each transducer and performs pulse counting measurements on sensor and reference channels to retrieve scientific data. Pressure and humidity measurements are scheduled and set up according to a configuration table assigned to each transducer. The configuration tables can be modified during the flight. The whole

  14. [Instrument for the assessment of middle-aged and older adults' physical activity: design, eliability and application of the German-PAQ-50+].

    Science.gov (United States)

    Huy, Christina; Schneider, Sven

    2008-06-01

    Existing physical activity questionnaires have focused either on young and middle-aged adults or on the elderly. They have mainly assessed only a portion of possible physical activities or contained nation-specific sports. As there is no gold standard for a questionnaire-based assessment of physical activity in the over-50 population, recommendations for such a questionnaire relating to German-speaking countries were developed. This work included a systematic literature research, a survey of experts, and the design of a questionnaire based on validated measuring instruments. Finally, to test its reliability and application in the field, the complete questionnaire, including a retest, was applied by telephone interview (n = 57). The test-retest-correlation was r = 0.60 for the total time of physical activity and r = 0.52 for total energy expenditure. The researchers determined that the instrument is comprehensive in its coverage of all relevant domains of physical activity for the over-50 population; it is economically feasible and showed good acceptance.

  15. Validity and reliability of the Patient-Reported Arthralgia Inventory: validation of a newly-developed survey instrument to measure arthralgia

    Directory of Open Access Journals (Sweden)

    Castel LD

    2015-07-01

    Full Text Available Liana D Castel,1 Kenneth A Wallston,2 Benjamin R Saville,3 JoAnn R Alvarez,3 Bradley D Shields,4 Irene D Feurer,3 David Cella5 1Meharry-Vanderbilt Alliance, Nashville, TN, USA; 2Psychology in Nursing, Vanderbilt University School of Nursing, Nashville, TN, USA; 3Surgery and Biostatistics, Vanderbilt University School of Medicine, Nashville, TN, USA; 4Medical Sciences, University of Arkansas School of Medicine, Little Rock, AR, USA; 5Medical Social Sciences, Northwestern University Feinberg School of Medicine, Chicago, IL, USA Background: There is a need for a survey instrument to measure arthralgia (joint pain that has been psychometrically validated in the context of existing reference instruments. We developed the 16-item Patient-Reported Arthralgia Inventory (PRAI to measure arthralgia severity in 16 joints, in the context of a longitudinal cohort study to assess aromatase inhibitor-associated arthralgia in breast cancer survivors and arthralgia in postmenopausal women without breast cancer. We sought to evaluate the reliability and validity of the PRAI instrument in these populations, as well as to examine the relationship of patient-reported morning stiffness and arthralgia. Methods: We administered the PRAI on paper in 294 women (94 initiating aromatase inhibitor therapy and 200 postmenopausal women without breast cancer at weeks 0, 2, 4, 6, 8, 12, 16, and 52, as well as once in 36 women who had taken but were no longer taking aromatase inhibitor therapy. Results: Cronbach's alpha was 0.9 for internal consistency of the PRAI. Intraclass correlation coefficients of test-retest reliability were in the range of 0.87–0.96 over repeated PRAI administrations; arthralgia severity was higher in the non-cancer group at baseline than at subsequent assessments. Women with joint comorbidities tended to have higher PRAI scores than those without (estimated difference in mean scores: -0.3, 95% confidence interval [CI] -0.5, -0.2; P<0.001. The PRAI was

  16. 基于虚拟仪器的汽车仪表设计%Design of Automobile Instrument Based on Virtual Instrument

    Institute of Scientific and Technical Information of China (English)

    杨小新

    2012-01-01

    以PC机、NI公司PCI-6221板卡、NI信号调理模块(应变、RTD、TC等)为硬件平台,以CSY.200(IC传感器与测控技术实验台为测控对象,以LabVIEW8.2为软件开发平台,设计汽车虚拟数字化仪表模拟机,可以实现日期/时间、总里程、当前速度、转速、温度、油箱存油量等信息的显示,实现汽车仪表的校验和标定。%The PC, PCI-6221 interface card of NI company, NI signal disposal module (strain, RTD, TC, etc.) are used as the hardware platform. CSY-2000 C sensor and measurement & control technology experiment platform are used as the measurement and control object. The LabVIEW8.2 is used as the software development platform. The automobile digital virtual instrument simulator is designed. The information of date/time, total mileage, the current speed, speed, temperature, oil in the tank can be displayed. The automobile meter calibration is implemented.

  17. Cosmic microwave background polarimetry with ABS and ACT: Instrumental design, characterization, and analysis

    Science.gov (United States)

    Simon, Sara Michelle

    The LCDM model of the universe is supported by an abundance of astronomical observations, but it does not confirm a period of inflation in the early universe or explain the nature of dark energy and dark matter. The polarization of the cosmic microwave background (CMB) may hold the key to addressing these profound questions. If a period of inflation occurred in the early universe, it could have left a detectable odd-parity pattern called B-modes in the polarization of the CMB on large angular scales. Additionally, the CMB can be used to probe the structure of the universe on small angular scales through lensing and the detection of galaxy clusters and their motions via the Sunyaev-Zel'dovich effect, which can improve our understanding of neutrinos, dark matter, and dark energy. The Atacama B-mode Search (ABS) instrument was a cryogenic crossed-Dragone telescope located at an elevation of 5190m in the Atacama Desert in Chile that observed from February 2012 until October 2014. ABS searched on degree-angular scales for inflationary B-modes in the CMB and pioneered the use of a rapidly-rotating half-wave plate (HWP), which modulates the polarization of incoming light to permit the measurement of celestial polarization on large angular scales that would otherwise be obscured by 1/f noise from the atmosphere. Located next to ABS in the Atacama is the Atacama Cosmology Telescope (ACT), which is an off-axis Gregorian telescope. Its large 6m primary mirror facilitates measurements of the CMB on small angular scales. HWPs are baselined for use with the upgraded polarization-sensitive camera for ACT, called Advanced ACTPol, to extend observations of the polarized CMB to larger angular scales while also retaining sensitivity to small angular scales. The B-mode signal is extremely faint, and measuring it poses an instrumental challenge that requires the development of new technologies and well-characterized instruments. I will discuss the use of novel instrumentation and

  18. Microsequence analysis of peptides and proteins. V. Design and performance of a novel gas-liquid-solid phase instrument.

    Science.gov (United States)

    Hawke, D H; Harris, D C; Shively, J E

    1985-06-01

    We describe the construction and performance of a novel, automated, Edman chemistry-based microsequencer. The reagent and solvent delivery system, the reaction cartridge for coupling and cleavage, and the conversion flask are all constructed from chemically inert perfluoroelastomers. The delivery valves are of a new design incorporating the use of electromagnetically actuated solenoids and zero-dead-volume construction, and may be connected in a modular fashion resulting in multiple inputs with a single output line which can be flushed with inert gas. The bottle closures are of a new design based on an all-Teflon compression fitting. The reaction cartridge and conversion flask are thermostated by solid-state heaters in an aluminum block. The overall size of the instrument is 25 X 34 X 14 in. The chemistry utilizes 2% aqueous triethylamine as the coupling base which is delivered to the reaction cartridge via a stream of nitrogen. The "gas-phase" delivery of the coupling base and the cleavage acid (trifluoroacetic acid) is modeled after the method described by R. M. Hewick et al. (J. Biol. Chem. 256, 7990-7997,1981). The instrument has performed well over a period of 3 years in terms of low background peaks, sensitivity in the picomole range, and reliability of operation. The use of economical components, ease of construction and operation, and sensitive analytical capability make this instrument a useful tool for microsequence analysis of peptides and proteins.

  19. Effects of sample survey design on the accuracy of classification tree models in species distribution models

    Science.gov (United States)

    Thomas C. Edwards; D. Richard Cutler; Niklaus E. Zimmermann; Linda Geiser; Gretchen G. Moisen

    2006-01-01

    We evaluated the effects of probabilistic (hereafter DESIGN) and non-probabilistic (PURPOSIVE) sample surveys on resultant classification tree models for predicting the presence of four lichen species in the Pacific Northwest, USA. Models derived from both survey forms were assessed using an independent data set (EVALUATION). Measures of accuracy as gauged by...

  20. Designing Large-Scale Imaging Surveys for a Retrospective Relative Photometric Calibration

    CERN Document Server

    Holmes, Rory; Rix, Hans-Walter

    2012-01-01

    We study the self-calibration - the determination of a complex system response from science data alone - for precise photometric catalogs from wide-field imaging surveys. We create an artificial sky of sources and synthetically observe it under four basic survey strategies, creating an end-to-end simulation of an imaging survey for each. These catalog-level simulations include realistic measurement uncertainties and a complex focal-plane dependence of the instrument response. In the self-calibration step, we simultaneously fit for all the star fluxes and the parameters of a position-dependent flat-field. For realism, we deliberately fit with a wrong noise model and a flat-field functional basis that does not include the model that generated the synthetic data. We demonstrate that with a favorable survey strategy, a complex (but smooth) instrument response can be precisely self-calibrated. We show that returning the same sources to very different focal plane positions is the key property of any survey strategy...

  1. THE FMOS-COSMOS SURVEY OF STAR-FORMING GALAXIES AT z ∼ 1.6. III. SURVEY DESIGN, PERFORMANCE, AND SAMPLE CHARACTERISTICS

    Energy Technology Data Exchange (ETDEWEB)

    Silverman, J. D.; Sugiyama, N. [Kavli Institute for the Physics and Mathematics of the Universe (WPI), The University of Tokyo Institutes for Advanced Study, The University of Tokyo, Kashiwa, 277-8583 (Japan); Kashino, D. [Division of Particle and Astrophysical Science, Graduate School of Science, Nagoya University, Nagoya, 464-8602 (Japan); Sanders, D.; Zahid, J.; Kewley, L. J.; Chu, J.; Hasinger, G. [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Drive, Honolulu, HI, 96822 (United States); Kartaltepe, J. S. [National Optical Astronomy Observatory, 950 N. Cherry Ave., Tucson, AZ, 85719 (United States); Arimoto, N. [Subaru Telescope, 650 North A’ohoku Place, Hilo, Hawaii, 96720 (United States); Renzini, A. [Instituto Nazionale de Astrofisica, Osservatorio Astronomico di Padova, vicolo dell’Osservatorio 5, I-35122, Padova, Italy, EU (Italy); Rodighiero, G.; Baronchelli, I. [Dipartimento di Fisica e Astronomia, Universita di Padova, vicolo Osservatorio, 3, I-35122, Padova (Italy); Daddi, E.; Juneau, S. [Laboratoire AIM, CEA/DSM-CNRS-Universite Paris Diderot, Irfu/Service d’Astrophysique, CEA Saclay (France); Nagao, T. [Graduate School of Science and Engineering, Ehime University, 2-5 Bunkyo-cho, Matsuyama 790-8577 (Japan); Lilly, S. J.; Carollo, C. M. [Institute of Astronomy, ETH Zürich, CH-8093, Zürich (Switzerland); Capak, P. [Spitzer Science Center, California Institute of Technology, Pasadena, CA 91125 (United States); Ilbert, O., E-mail: john.silverman@ipmu.jp [Aix Marseille Université, CNRS, LAM (Laboratoire d’Astrophysique de Marseille) UMR 7326, F-13388, Marseille (France); and others

    2015-09-15

    We present a spectroscopic survey of galaxies in the COSMOS field using the Fiber Multi-object Spectrograph (FMOS), a near-infrared instrument on the Subaru Telescope. Our survey is specifically designed to detect the Hα emission line that falls within the H-band (1.6–1.8 μm) spectroscopic window from star-forming galaxies with 1.4 < z < 1.7 and M{sub stellar} ≳ 10{sup 10} M{sub ⊙}. With the high multiplex capability of FMOS, it is now feasible to construct samples of over 1000 galaxies having spectroscopic redshifts at epochs that were previously challenging. The high-resolution mode (R ∼ 2600) effectively separates Hα and [N ii]λ6585, thus enabling studies of the gas-phase metallicity and photoionization state of the interstellar medium. The primary aim of our program is to establish how star formation depends on stellar mass and environment, both recognized as drivers of galaxy evolution at lower redshifts. In addition to the main galaxy sample, our target selection places priority on those detected in the far-infrared by Herschel/PACS to assess the level of obscured star formation and investigate, in detail, outliers from the star formation rate (SFR)—stellar mass relation. Galaxies with Hα detections are followed up with FMOS observations at shorter wavelengths using the J-long (1.11–1.35 μm) grating to detect Hβ and [O iii]λ5008 which provides an assessment of the extinction required to measure SFRs not hampered by dust, and an indication of embedded active galactic nuclei. With 460 redshifts measured from 1153 spectra, we assess the performance of the instrument with respect to achieving our goals, discuss inherent biases in the sample, and detail the emission-line properties. Our higher-level data products, including catalogs and spectra, are available to the community.

  2. SKA Weak Lensing II: Simulated Performance and Survey Design Considerations

    CERN Document Server

    Bonaldi, Anna; Camera, Stefano; Brown, Michael L

    2016-01-01

    We construct a pipeline for simulating weak lensing cosmology surveys with the Square Kilometre Array (SKA), taking as inputs telescope sensitivity curves; correlated source flux, size and redshift distributions; a simple ionospheric model; source redshift and ellipticity measurement errors. We then use this simulation pipeline to optimise a 2-year weak lensing survey performed with the first deployment of the SKA (SKA1). Our assessments are based on the total signal-to-noise of the recovered shear power spectra, a metric that we find to correlate very well with a standard dark energy figure of merit. We first consider the choice of frequency band, trading off increases in number counts at lower frequencies against poorer resolution; our analysis strongly prefers the higher frequency Band 2 (950-1760 MHz) channel of the SKA-MID telescope to the lower frequency Band 1 (350-1050 MHz). Best results would be obtained by allowing the centre of Band 2 to shift towards lower frequency, around 1.1 GHz. We then move o...

  3. The cryomechanical design of MUSIC: a novel imaging instrument for millimeter-wave astrophysics at the Caltech Submillimeter Observatory

    Science.gov (United States)

    Hollister, Matthew I.; Czakon, Nicole G.; Day, Peter K.; Downes, Thomas P.; Duan, Ran; Gao, Jiansong; Glenn, Jason; Golwala, Sunil R.; LeDuc, Henry G.; Maloney, Philip R.; Mazin, Benjamin A.; Nguyen, Hien Trong; Noroozian, Omid; Sayers, Jack; Schlaerth, James; Siegel, Seth; Vaillancourt, John E.; Vayonakis, Anastasios; Wilson, Philip; Zmuidzinas, Jonas

    2010-07-01

    MUSIC (Multicolor Submillimeter kinetic Inductance Camera) is a new facility instrument for the Caltech Submillimeter Observatory (Mauna Kea, Hawaii) developed as a collaborative effect of Caltech, JPL, the University of Colorado at Boulder and UC Santa Barbara, and is due for initial commissioning in early 2011. MUSIC utilizes a new class of superconducting photon detectors known as microwave kinetic inductance detectors (MKIDs), an emergent technology that offers considerable advantages over current types of detectors for submillimeter and millimeter direct detection. MUSIC will operate a focal plane of 576 spatial pixels, where each pixel is a slot line antenna coupled to multiple detectors through on-chip, lumped-element filters, allowing simultaneously imaging in four bands at 0.86, 1.02, 1.33 and 2.00 mm. The MUSIC instrument is designed for closed-cycle operation, combining a pulse tube cooler with a two-stage Helium-3 adsorption refrigerator, providing a focal plane temperature of 0.25 K with intermediate temperature stages at approximately 50, 4 and 0.4 K for buffering heat loads and heat sinking of optical filters. Detector readout is achieved using semi-rigid coaxial cables from room temperature to the focal plane, with cryogenic HEMT amplifiers operating at 4 K. Several hundred detectors may be multiplexed in frequency space through one signal line and amplifier. This paper discusses the design of the instrument cryogenic hardware, including a number of features unique to the implementation of superconducting detectors. Predicted performance data for the instrument system will also be presented and discussed.

  4. The DESI Experiment Part I: Science,Targeting, and Survey Design

    OpenAIRE

    DESI Collaboration; Aghamousa, Amir; Aguilar, Jessica; Ahlen, Steve; Alam, Shadab; Allen, Lori E.; Prieto, Carlos Allende; Annis, James; Bailey, Stephen; Balland, Christophe; Ballester, Otger; Baltay, Charles; Beaufore, Lucas; Bebek, Chris; Beers, Timothy C.

    2016-01-01

    DESI (Dark Energy Spectroscopic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations (BAO) and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. To trace the underlying dark matter distribution, spectroscopic targets will be selected in four classes from imaging data. We will measure luminous red galaxies up to $z=1.0$. To probe the Universe out to even higher redshift, DESI will...

  5. PICASSO VISION instrument design, engineering model test results, and flight model development status

    Science.gov (United States)

    Näsilä, Antti; Holmlund, Christer; Mannila, Rami; Näkki, Ismo; Ojanen, Harri J.; Akujärvi, Altti; Saari, Heikki; Fussen, Didier; Pieroux, Didier; Demoulin, Philippe

    2016-10-01

    PICASSO - A PICo-satellite for Atmospheric and Space Science Observations is an ESA project led by the Belgian Institute for Space Aeronomy, in collaboration with VTT Technical Research Centre of Finland Ltd, Clyde Space Ltd. (UK) and Centre Spatial de Liège (BE). The test campaign for the engineering model of the PICASSO VISION instrument, a miniaturized nanosatellite spectral imager, has been successfully completed. The test results look very promising. The proto-flight model of VISION has also been successfully integrated and it is waiting for the final integration to the satellite platform.

  6. Designing and Development of Readout and Configuration Program for the MXGS-Instrument

    OpenAIRE

    Sharma, Arun Kumar

    2011-01-01

    The Atmosphere-Space Interactive Monitor (ASIM) is a project running under the guideline and financial support of the European Space Agency (ESA). The ASIM instrument consists of several high resolution, optical cameras and an X-ray and Gamma-ray detector. The ASIM payload is to be installed on the Columbus module on International Space Station (ISS) which will orbit the Earth at an altitude of 300-400 km, and will observe the Earth's atmosphere for a time span of two years after installation...

  7. The FMOS-COSMOS survey of star-forming galaxies at z~1.6 III. Survey design, performance, and sample characteristics

    CERN Document Server

    Silverman, J D; Arimoto, N; Renzini, A; Rodighiero, G; Daddi, E; Sanders, D; Kartaltepe, J; Zahid, J; Nagao, T; Kewley, L J; Lilly, S J; Sugiyama, N; Capak, P; Carollo, C M; Chu, J; Hasinger, G; Ilbert, O; Kajisawa, M; Koekemoer, A M; Kovac, K; Fevre, O Le; Masters, D; McCracken, H J; Onodera, M; Scoville, N; Strazzullo, V; Taniguchi, Y

    2014-01-01

    We present a spectroscopic survey of galaxies in the COSMOS field using the Fiber Multi-Object Spectrograph (FMOS), a near-infrared instrument on the Subaru Telescope. Our survey is specifically designed to detect the Halpha emission line that falls within the H-band (1.6-1.8 micron) spectroscopic window from star-forming galaxies with M_stellar>10^10 Msolar and 1.4 < z < 1.7. With the high multiplex capabilities of FMOS, it is now feasible to construct samples of over one thousand galaxies having spectroscopic redshifts at epochs that were previously challenging. The high-resolution mode (R~2600) is implemented to effectively separate Halpha and [NII] emission lines thus enabling studies of gas-phase metallicity and photoionization conditions of the interstellar medium. The broad goals of our program are concerned with how star formation depends on stellar mass and environment, both recognized as drivers of galaxy evolution at lower redshifts. In addition to the main galaxy sample, our target selection...

  8. Detailed design and first tests of the application software for the instrument control unit of Euclid-NISP

    Science.gov (United States)

    Ligori, S.; Corcione, L.; Capobianco, V.; Bonino, D.; Sirri, G.; Fornari, F.; Giacomini, F.; Patrizii, L.; Valenziano, L.; Travaglini, R.; Colodro, C.; Bortoletto, F.; Bonoli, C.; Chiarusi, T.; Margiotta, A.; Mauri, N.; Pasqualini, L.; Spurio, M.; Tenti, M.; Dal Corso, F.; Dusini, S.; Laudisio, F.; Sirignano, C.; Stanco, L.; Ventura, S.; Auricchio, N.; Balestra, A.; Franceschi, E.; Morgante, G.; Trifoglio, M.; Medinaceli, E.; Guizzo, G. P.; Debei, S.; Stephen, J. B.

    2016-07-01

    In this paper we describe the detailed design of the application software (ASW) of the instrument control unit (ICU) of NISP, the Near-Infrared Spectro-Photometer of the Euclid mission. This software is based on a real-time operating system (RTEMS) and will interface with all the subunits of NISP, as well as the command and data management unit (CDMU) of the spacecraft for telecommand and housekeeping management. We briefly review the main requirements driving the design and the architecture of the software that is approaching the Critical Design Review level. The interaction with the data processing unit (DPU), which is the intelligent subunit controlling the detector system, is described in detail, as well as the concept for the implementation of the failure detection, isolation and recovery (FDIR) algorithms. The first version of the software is under development on a Breadboard model produced by AIRBUS/CRISA. We describe the results of the tests and the main performances and budgets.

  9. Temporally adaptive sampling: a case study in rare species survey design with marbled salamanders (Ambystoma opacum.

    Directory of Open Access Journals (Sweden)

    Noah D Charney

    Full Text Available Improving detection rates for elusive species with clumped distributions is often accomplished through adaptive sampling designs. This approach can be extended to include species with temporally variable detection probabilities. By concentrating survey effort in years when the focal species are most abundant or visible, overall detection rates can be improved. This requires either long-term monitoring at a few locations where the species are known to occur or models capable of predicting population trends using climatic and demographic data. For marbled salamanders (Ambystoma opacum in Massachusetts, we demonstrate that annual variation in detection probability of larvae is regionally correlated. In our data, the difference in survey success between years was far more important than the difference among the three survey methods we employed: diurnal surveys, nocturnal surveys, and dipnet surveys. Based on these data, we simulate future surveys to locate unknown populations under a temporally adaptive sampling framework. In the simulations, when pond dynamics are correlated over the focal region, the temporally adaptive design improved mean survey success by as much as 26% over a non-adaptive sampling design. Employing a temporally adaptive strategy costs very little, is simple, and has the potential to substantially improve the efficient use of scarce conservation funds.

  10. Temporally adaptive sampling: a case study in rare species survey design with marbled salamanders (Ambystoma opacum).

    Science.gov (United States)

    Charney, Noah D; Kubel, Jacob E; Eiseman, Charles S

    2015-01-01

    Improving detection rates for elusive species with clumped distributions is often accomplished through adaptive sampling designs. This approach can be extended to include species with temporally variable detection probabilities. By concentrating survey effort in years when the focal species are most abundant or visible, overall detection rates can be improved. This requires either long-term monitoring at a few locations where the species are known to occur or models capable of predicting population trends using climatic and demographic data. For marbled salamanders (Ambystoma opacum) in Massachusetts, we demonstrate that annual variation in detection probability of larvae is regionally correlated. In our data, the difference in survey success between years was far more important than the difference among the three survey methods we employed: diurnal surveys, nocturnal surveys, and dipnet surveys. Based on these data, we simulate future surveys to locate unknown populations under a temporally adaptive sampling framework. In the simulations, when pond dynamics are correlated over the focal region, the temporally adaptive design improved mean survey success by as much as 26% over a non-adaptive sampling design. Employing a temporally adaptive strategy costs very little, is simple, and has the potential to substantially improve the efficient use of scarce conservation funds.

  11. Educators on School Design: A Survey of Professional Opinion

    Science.gov (United States)

    Constr Prod Technol, 1970

    1970-01-01

    Selected members of the American Association of School Administrators speak out on some prime problems that stem from the original design and construction of existing school facilities. These administrators discuss ways that architects, engineers, contractors, and building product manufacturers can insure that new buildings will better meet future…

  12. Design Trends in Editorial Presentation: A Survey of Business Communicators.

    Science.gov (United States)

    Culpepper, Maryanne G.

    This study examines the design and editing procedures of business publications--publications for employees, stockholders, and combinations of these audiences. Following a review of the literature which turned up little information on business publications, it was decided that a mail questionnaire sent to a sample of business publication editors…

  13. Surveying the factors that influence maintainability: research design

    NARCIS (Netherlands)

    Hordijk, W.T.B.; Wieringa, Roelf J.

    2005-01-01

    We want to explore and analyse design decisions that influence maintainability of software. Software maintainability is important because the effort expended on changes and fixes in software is a major cost driver. We take an empirical, qualitative approach, by investigating cases where a change has

  14. Mixed Estimation for a Forest Survey Sample Design

    Science.gov (United States)

    Francis A. Roesch

    1999-01-01

    Three methods of estimating the current state of forest attributes over small areas for the USDA Forest Service Southern Research Station's annual forest sampling design are compared. The three methods were (I) simple moving average, (II) single imputation of plot data that had been updated by externally developed models, and (III) local application of a global...

  15. Net Survey: "Top Ten Mistakes" in Academic Web Design.

    Science.gov (United States)

    Petrik, Paula

    2000-01-01

    Highlights the top ten mistakes in academic Web design: (1) bloated graphics; (2) scaling images; (3) dense text; (4) lack of contrast; (5) font size; (6) looping animations; (7) courseware authoring software; (8) scrolling/long pages; (9) excessive download; and (10) the nothing site. Includes resources. (CMK)

  16. Design Effects in Web Surveys : Comparing Trained and Fresh Respondents

    NARCIS (Netherlands)

    Toepoel, V.; Das, J.W.M.; van Soest, A.H.O.

    2008-01-01

    In this paper we investigate whether there are differences in design effects between trained and fresh respondents. In three experiments, we varied the number of items on a screen, the choice of response categories, and the layout of a five point rating scale. We find that trained respondents are mo

  17. A Multi-Stage Human Factors and Comfort Assessment of Instrumented Insoles Designed for Use in a Connected Health Infrastructure

    Directory of Open Access Journals (Sweden)

    Richard Harte

    2015-12-01

    Full Text Available Wearable electronics are gaining widespread use as enabling technologies, monitoring human physical activity and behavior as part of connected health infrastructures. Attention to human factors and comfort of these devices can greatly positively influence user experience, with a subsequently higher likelihood of user acceptance and lower levels of device rejection. Here, we employ a human factors and comfort assessment methodology grounded in the principles of human-centered design to influence and enhance the design of an instrumented insole. A use case was developed and interrogated by stakeholders, experts, and end users, capturing the context of use and user characteristics for the instrumented insole. This use case informed all stages of the design process through two full design cycles, leading to the development of an initial version 1 and a later version 2 prototype. Each version of the prototype was subjected to an expert human factors inspection and controlled comfort assessment using human volunteers. Structured feedback from the first cycle of testing was the driver of design changes implemented in the version 2 prototype. This prototype was found to have significantly improved human factors and comfort characteristics over the first version of the prototype. Expert inspection found that many of the original problems in the first prototype had been resolved in the second prototype. Furthermore, a comfort assessment of this prototype with a group of young healthy adults showed it to be indistinguishable from their normal footwear. This study demonstrates the power and effectiveness of human factors and comfort assessment methodologies in influencing and improving the design of wearable devices.

  18. The Spitzer-South Pole Telescope Deep Field: Survey Design and IRAC Catalogs

    CERN Document Server

    Ashby, M L N; Brodwin, M; Gonzalez, A H; Martinez, J; Bartlett, J G; Benson, B A; Bleem, L E; Crawford, T M; Dey, A; Dressler, A; Eisenhardt, P R M; Galametz, A; Jannuzi, B T; Marrone, D P; Mei, S; Muzzin, A; Pacaud, F; Pierre, M; Stern, D; Vieira, J D

    2013-01-01

    The Spitzer-South Pole Telescope Deep Field (SSDF) is a wide-area survey using Spitzer's Infrared Array Camera (IRAC) to cover 94 square degrees of extragalactic sky, making it the largest IRAC survey completed to date outside the Milky Way midplane. The SSDF is centered at 23:30,-55:00, in a region that combines observations spanning a broad wavelength range from numerous facilities. These include millimeter imaging from the South Pole Telescope, far-infrared observations from Herschel/SPIRE, X-ray observations from the XMM XXL survey, near-infrared observations from the VISTA Hemisphere Survey, and radio-wavelength imaging from the Australia Telescope Compact Array, in a panchromatic project designed to address major outstanding questions surrounding galaxy clusters and the baryon budget. Here we describe the Spitzer/IRAC observations of the SSDF, including the survey design, observations, processing, source extraction, and publicly available data products. In particular, we present two band-merged catalogs...

  19. Design and instrumentation of an airborne far infrared radiometer for in-situ measurements of ice clouds

    Science.gov (United States)

    Proulx, Christian; Ngo Phong, Linh; Lamontagne, Frédéric; Wang, Min; Fisette, Bruno; Martin, Louis; Châteauneuf, François

    2016-09-01

    We report on the design and instrumentation of an aircraft-certified far infrared radiometer (FIRR) and the resulting instrument characteristics. FIRR was designed to perform unattended airborne measurements of ice clouds in the arctic in support of a microsatellite payload study. It provides radiometrically calibrated data in nine spectral channels in the range of 8-50 μm with the use of a rotating wheel of bandpass filters and reference blackbodies. Measurements in this spectral range are enabled with the use of a far infrared detector based on microbolometers of 104-μm pitch. The microbolometers have a new design because of the large structure and are coated with gold black to maintain uniform responsivity over the working spectral range. The vacuum sealed detector package is placed at the focal plane of a reflective telescope based on a Schwarschild configuration with two on-axis spherical mirrors. The telescope field-of-view is of 6° and illuminates an area of 2.1-mm diameter at the focal plane. In operation, FIRR was used as a nonimaging radiometer and exhibited a noise equivalent radiance in the range of 10-20 mW/m2-sr. The dynamic range and the detector vacuum integrity of FIRR were found to be suited for the conditions of the airborne experiments.

  20. 化工企业自动化仪表的设计探讨%Design of Automated Instrumentation Chemical Companies

    Institute of Scientific and Technical Information of China (English)

    鞠丽娜

    2014-01-01

    Good chemical enterprise automation instrument designed to optimize the performance of automated instrumentation to improve their adaptability. Briefly introduces the chemical industry automation instrument and its design principles and instrumentation classification, describes the basic design concept of the chemical industry automation instruments.%良好的化工企业自动化仪表设计可以优化自动化仪表的使用性能,提高其适应性。简要介绍了化工企业自动化仪表及其设计原则和仪表分类,阐述了化工企业自动化仪表的基本设计理念。

  1. Instrument technology for magnetosphere plasma imaging from high Earth orbit. Design of a radio plasma sounder

    Science.gov (United States)

    Haines, D. Mark; Reinisch, Bodo W.

    1995-01-01

    The use of radio sounding techniques for the study of the ionospheric plasma dates back to G. Briet and M. A. Tuve in 1926. Ground based swept frequency sounders can monitor the electron number density (N(sub e)) as a function of height (the N(sub e) profile). These early instruments evolved into a global network that produced high-resolution displays of echo time delay vs frequency on 35-mm film. These instruments provided the foundation for the success of the International Geophysical Year (1958). The Alouette and International Satellites for Ionospheric Studies (ISIS) programs pioneered the used of spaceborne, swept frequency sounders to obtain N(sub e) profiles of the topside of the ionosphere, from a position above the electron density maximum. Repeated measurements during the orbit produced an orbital plane contour which routinely provided density measurements to within 10%. The Alouette/ISIS experience also showed that even with a high powered transmitter (compared to the low power sounder possible today) a radio sounder can be compatible with other imaging instruments on the same satellite. Digital technology was used on later spacecraft developed by the Japanese (the EXOS C and D) and the Soviets (Intercosmos 19 and Cosmos 1809). However, a full coherent pulse compression and spectral integrating capability, such as exist today for ground-based sounders (Reinisch et al., 1992), has never been put into space. NASA's 1990 Space Physics Strategy Implementation Study "The NASA Space Physics Program from 1995 to 2010" suggested using radio sounders to study the plasmasphere and the magnetopause and its boundary layers (Green and Fung, 1993). Both the magnetopause and plasmasphere, as well as the cusp and boundary layers, can be observed by a radio sounder in a high-inclination polar orbit with an apogee greater than 6 R(sub e) (Reiff et al., 1994; Calvert et al., 1995). Magnetospheric radio sounding from space will provide remote density measurements of

  2. Evaluation of the two non-consecutive 24-h recall instrument for pan-European food consumption surveys

    NARCIS (Netherlands)

    Crispim, S.P.

    2011-01-01

    Background: The comparability of food consumption data originating from national nutritional surveys in Europe is currently hampered because of different methodologies used. Therefore, experts in the European Food Consumption Survey Method (EFCOSUM) consortium proposed to use two non-consecutive 24-

  3. Opto-mechanical design of optical window for aero-optics effect simulation instruments

    Science.gov (United States)

    Wang, Guo-ming; Dong, Dengfeng; Zhou, Weihu; Ming, Xing; Zhang, Yan

    2016-10-01

    A complete theory is established for opto-mechanical systems design of the window in this paper, which can make the design more rigorous .There are three steps about the design. First, the universal model of aerodynamic environment is established based on the theory of Computational Fluid Dynamics, and the pneumatic pressure distribution and temperature data of optical window surface is obtained when aircraft flies in 5-30km altitude, 0.5-3Ma speed and 0-30°angle of attack. The temperature and pressure distribution values for the maximum constraint is selected as the initial value of external conditions on the optical window surface. Then, the optical window and mechanical structure are designed, which is also divided into two parts: First, mechanical structure which meet requirements of the security and tightness is designed. Finally, rigorous analysis and evaluation are given about the structure of optics and mechanics we have designed. There are two parts to be analyzed. First, the Fluid-Solid-Heat Coupled Model is given based on finite element analysis. And the deformation of the glass and structure can be obtained by the model, which can assess the feasibility of the designed optical windows and ancillary structure; Second, the new optical surface is fitted by Zernike polynomials according to the deformation of the surface of the optical window, which can evaluate imaging quality impact of spectral camera by the deformation of window.

  4. Beamline Design and Instrumentation for the Imaging and Coherence Beamline I13L at the Diamond Light Source

    Science.gov (United States)

    Wagner, U. H.; Pešić, Z. D.; De Fanis, A.; Rau, C.

    2013-03-01

    I13L is a 250 m long hard x-ray beamline (6 keV to 35 keV) at the Diamond Light Source. The beamline comprises of two independent experimental endstations: one for imaging in direct space using x-ray microscopy and one for imaging in reciprocal space using coherent diffraction based imaging techniques. In this paper we will discuss the fundamental design concepts of the beamline and explain their implications for the civil engineering of the endstation building and the beamline instrumentation. For the latter this paper will focus on the beamline mirror systems and monochromators.

  5. An instrument design to measure the sustainability of technology in risky environments: Case study of Iraq

    Science.gov (United States)

    Al-Sammarraie, Munadil Khaleel Faaeq; Faieq, Alaa K.; Al-Qasa, Khaled

    2016-08-01

    Electronic Government (eG) has become a vital tool to serve the beneficiaries; therefore, it has received the attention of many Information System (IS) researchers. Due to the importance of the sustainability of IS, this paper identifies the emergence of a clear gape to measure the sustainability of IS in risky circumstances, such as wars, conflicts and violence; nowadays, the risky issue is increasing remarkably. This paper expands previous studies whose focus was on investigating the sustainability of electronic services unsecured countries in the world. Consequently, a need for a specific tool to measure the sustainability of technology among the users in risky conditions has become urgent. Based on the findings, it can be confirmed that this instrument is reliable to measure the sustainability of technology in risky environments.

  6. Measurements of total odd nitrogen (NOy aboard MOZAIC in-service aircraft: instrument design, operation and performance

    Directory of Open Access Journals (Sweden)

    D. Raak

    2004-10-01

    Full Text Available A small system for the unattended measurement of total odd nitrogen (NOy, i.e., the sum of NO and its atmospheric oxidation products aboard civil in-service aircraft in the framework of MOZAIC is described. The instrument employs the detection of NO by its chemiluminescence with O3 in combination with catalytic conversion of the other NOy compounds to NO at 300°C on a gold surface in the presence of H2. The instrument has a sensitivity of 0.4–7 cps/ppt and is designed for unattended operation during 1–2 service cycles of the aircraft (400–800 flight hours. The total weight is 50 kg, including calibration system, compressed gases, mounting, and safety measures. The layout and inlet configuration are governed by requirements due to the certification for passenger aircraft. Laboratory tests are described regarding the conversion efficiency for NO2 and HNO3 (both >98%. Interference by HCN and NH3 is 100% and <1%, respectively. The time response (90% time of the instrument is <1 s for NO2 and 150 s for HNO3, the latter being caused by memory effects in the 80 cm long inlet line.

  7. Conceptual design of the X-IFU Instrument Control Unit on board the ESA Athena mission

    Science.gov (United States)

    Corcione, L.; Ligori, S.; Capobianco, V.; Bonino, D.; Valenziano, L.; Guizzo, G. P.

    2016-07-01

    Athena is one of L-class missions selected in the ESA Cosmic Vision 2015-2025 program for the science theme of the Hot and Energetic Universe. The Athena model payload includes the X-ray Integral Field Unit (X-IFU), an advanced actively shielded X-ray microcalorimeter spectrometer for high spectral resolution imaging, utilizing cooled Transition Edge Sensors. This paper describes the preliminary architecture of Instrument Control Unit (ICU), which is aimed at operating all XIFU's subsystems, as well as at implementing the main functional interfaces of the instrument with the S/C control unit. The ICU functions include the TC/TM management with S/C, science data formatting and transmission to S/C Mass Memory, housekeeping data handling, time distribution for synchronous operations and the management of the X-IFU components (i.e. CryoCoolers, Filter Wheel, Detector Readout Electronics Event Processor, Power Distribution Unit). ICU functions baseline implementation for the phase-A study foresees the usage of standard and Space-qualified components from the heritage of past and current space missions (e.g. Gaia, Euclid), which currently encompasses Leon2/Leon3 based CPU board and standard Space-qualified interfaces for the exchange commands and data between ICU and X-IFU subsystems. Alternative architecture, arranged around a powerful PowerPC-based CPU, is also briefly presented, with the aim of endowing the system with enhanced hardware resources and processing power capability, for the handling of control and science data processing tasks not defined yet at this stage of the mission study.

  8. Vernier Caliper and Micrometer Computer Models Using Easy Java Simulation and Its Pedagogical Design Features--Ideas for Augmenting Learning with Real Instruments

    Science.gov (United States)

    Wee, Loo Kang; Ning, Hwee Tiang

    2014-01-01

    This paper presents the customization of Easy Java Simulation models, used with actual laboratory instruments, to create active experiential learning for measurements. The laboratory instruments are the vernier caliper and the micrometer. Three computer model design ideas that complement real equipment are discussed. These ideas involve (1) a…

  9. Vernier Caliper and Micrometer Computer Models Using Easy Java Simulation and Its Pedagogical Design Features--Ideas for Augmenting Learning with Real Instruments

    Science.gov (United States)

    Wee, Loo Kang; Ning, Hwee Tiang

    2014-01-01

    This paper presents the customization of Easy Java Simulation models, used with actual laboratory instruments, to create active experiential learning for measurements. The laboratory instruments are the vernier caliper and the micrometer. Three computer model design ideas that complement real equipment are discussed. These ideas involve (1) a…

  10. MicroCameras and Photometers (MCP) instrument on board TARANIS satellite: scientific objectives, design, characterization results and products

    Science.gov (United States)

    Farges, T.; Hébert, P.; Le Mer-Dachard, F.; Cansot, E.; Offroy, M.; Ravel, K.; Gaillac, S.; Sato, M.; Blanc, E.

    2015-12-01

    TARANIS (Tool for the Analysis of Radiations from lightNings and Sprites) is a CNES micro satellite. Its main objective is to study impulsive transfers of energy between the Earth atmosphere and the space environment. It will be sun-synchronous at an altitude of 700 km. It will be launched from late 2017 for at least 2 years. Its payload is composed of several electromagnetic instruments in different wavelengths (from gamma-rays to radio waves including optical). TARANIS instruments are currently in calibration and qualification phase. The purpose of this poster is to present the MicroCameras and Photometers (MCP) scientific objectives and the sensor design, to show the performances of this instrument using the recent characterization, and at last to promote its products. The MicroCameras, developed by Sodern, are dedicated to the spatial description of TLEs and their parent lightning. They are able to differentiate sprite and lightning thanks to two narrow bands ([757-767 nm] and [772-782 nm]) that provide simultaneous pairs of images of an Event. The calibration results will be detailed. Simulation results of the differentiation method will be shown. Photometers, developed by Bertin Technologies, will provide temporal measurements and spectral characteristics of TLEs and lightning. It is a key instrument because of its on-board detection of the TLEs which can trigger the whole payload. Photometers use four spectral bands in the [170-260 nm], [332-342 nm], [757-767 nm] and [600-900 nm] and have the same field of view as cameras. The calibration results will also be detailed. The on-board TLE detection algorithm remote-controlled parameters will be tuned before launch using the electronic board and simulated or real events waveforms. Automatic classification tools are now tested to produce for the Scientific Mission Center some lists of elves, sprites or lightning without TLE following the recent work of Offroy et al. [2015] using ISUAL spectrophotometer data.

  11. A towed body designed for side-scanning hydroacoustic surveying of fish stocks in shallow waters

    NARCIS (Netherlands)

    Mous, P.J.; Kemper, J.; Schelvis, A.

    1999-01-01

    An aluminum towed body was designed for use in hydroacoustic surveying of fish stocks in shallow (2–10 m depth) inland waters. The design allows applications in deep (>10 m) water bodies as well. Test results showed that the towed body was a stable platform for the hydroacoustic transducer. The towe

  12. Survey of Mechatronic Techniques in Modern Machine Design

    Directory of Open Access Journals (Sweden)

    Devdas Shetty

    2012-01-01

    Full Text Available Increasing demands on the productivity of complex systems, such as manufacturing machines and their steadily growing technological importance will require the application of new methods in the product development process. A smart machine can make decisions about the process in real-time with plenty of adaptive controls. This paper shows the simulation based mechatronic model of a complex system with a better understanding of the dynamic behavior and interactions of the components. This offers improved possibilities of evaluating and optimizing the dynamic motion performance of the entire automated system in the early stages of the design process. Another effect is the growing influence of interactions between machine components on achievable machine dynamics and precision and quality of components. The examples cited in this paper, demonstrate the distinguishing feature of mechatronic systems through intensive integration. The case studies also show that it will no longer be sufficient to focus solely on the optimization of subsystems. Instead it will be necessary to strive for optimization of the complete system. The interactions between machine components, the influence of the control system and the machining process will have to be considered during the design process and the coordination of feed drives and frame structure components.

  13. Phase I: the pipeline-gas demonstration plant. Demonstration plant engineering and design. Volume 17. Plant section 2500 - Plant and Instrument Air

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-05-01

    Contract No. EF-77-C-01-2542 between Conoco Inc. and the US Department of Energy provides for the design, construction, and operation of a demonstration plant capable of processing bituminous caking coals into clean pipeline quality gas. The project is currently in the design phase (Phase I). This phase is scheduled to be completed in June 1981. One of the major efforts of Phase I is the process and project engineering design of the Demonstration Plant. The design has been completed and is being reported in 24 volumes. This is Volume 17 which reports the design of Plant Section 2500 - Plant and Instrument Air. The plant and instrument air system is designed to provide dry, compressed air for a multitude of uses in plant operations and maintenance. A single centrifugal air compressor provides the total plant and instrument air requirements. An air drying system reduces the dew point of the plant and instrument air. Plant Section 2500 is designed to provide air at 100/sup 0/F and 100 psig. Both plant and instrument air are dried to a -40/sup 0/F dew point. Normal plant and instrument air requirements total 1430 standard cubic feet per minute.

  14. Printed wiring board design and manufacture in Electronic Instrumentation Department 8450

    Energy Technology Data Exchange (ETDEWEB)

    Hardin, D.J.; Schoeppe, H.E.; Franssen, R.L.; Kirchner, G.W. (Sandia National Labs., Livermore, CA (United States))

    1991-05-01

    In order to successfully and efficiently produce printed wiring boards, the full progression from design concept through fabrication must be understood. Within Department 8450, this includes the utilization of Valid Logic Systems Computer-Aided Engineering (CAE) tools to perform schematic capture, circuit simulation, and board layout. If the appropriate functions are not performed in the proper sequence, or if the essential materials are not available when needed, the time required to produce a printed wiring board will grow inordinately. This report details the process flow within Department 8450, starting with the initial design requirements and concluding with a completely fabricated and tested circuit board. Recommendations for improving the system are also presented. Design are manufacturing considerations that impact the process are identified, as are the input and output requirements for each stage. With this information as a guide, a design engineer will be able to utilize the CAE tools available for circuit board design more effectively and minimize the time interval from concept to final product. 10 figs.

  15. Instrumentalization of origami in construction of folded plate structures - design, research and education

    Directory of Open Access Journals (Sweden)

    Nestorović Miodrag

    2016-01-01

    Full Text Available The paper deals with the origami used as an abstract tool to describe and represent the form and the structure of physical objects. In that respect, the potentials of this interdisciplinary technique as a medium of exploration of structural forms was introduced in the semester project done within the course Structural Systems at the Belgrade University, Faculty of Architecture. The technique was used as an interface to gain cognitive experience on spatial transformation and computational design. Throughout the intensive project period divided into three successive stages, the objective was to test method which enabled students to analyze geometrical principles of folding in order to apply these principles in the development of new designs. The generative algorithm inspired by the technique of paper folding assisted form-finding. Resulting shapes were verified by a production of small scale prototype models. The applied method, as a guiding design principle, facilitated formal exploration and augmentation of the design process. At the end of the course, students got cognitive experience on structural forms, while this simple technique delivered richness in terms of design solutions. [Projekat Ministarstva nauke Republike Srbije, br. TR36008

  16. The Development of a Survey Instrument on South Dakota's School District Leadership Climate as Related to Deming's Fourteen Points.

    Science.gov (United States)

    Holmes, Lawrence W. O.; And Others

    Development of an instrument to measure baseline levels of applied Total Quality Management (TQM) practices in South Dakota before the introduction and dissemination of TQM theory to the state's educational leaders is described. Using the interpretation of Deming's 14 points that was developed by J. J. Bonstigl, a 115-item initial item pool was…

  17. Instrumented roll technology for the design space development of roller compaction process.

    Science.gov (United States)

    Nesarikar, Vishwas V; Vatsaraj, Nipa; Patel, Chandrakant; Early, William; Pandey, Preetanshu; Sprockel, Omar; Gao, Zhihui; Jerzewski, Robert; Miller, Ronald; Levin, Michael

    2012-04-15

    Instrumented roll technology on Alexanderwerk WP120 roller compactor was developed and utilized successfully for the measurement of normal stress on ribbon during the process. The effects of process parameters such as roll speed (4-12 rpm), feed screw speed (19-53 rpm), and hydraulic roll pressure (40-70 bar) on normal stress and ribbon density were studied using placebo and active pre-blends. The placebo blend consisted of 1:1 ratio of microcrystalline cellulose PH102 and anhydrous lactose with sodium croscarmellose, colloidal silicon dioxide, and magnesium stearate. The active pre-blends were prepared using various combinations of one active ingredient (3-17%, w/w) and lubricant (0.1-0.9%, w/w) levels with remaining excipients same as placebo. Three force transducers (load cells) were installed linearly along the width of the roll, equidistant from each other with one transducer located in the center. Normal stress values recorded by side sensors and were lower than normal stress values recorded by middle sensor and showed greater variability than middle sensor. Normal stress was found to be directly proportional to hydraulic pressure and inversely to screw to roll speed ratio. For active pre-blends, normal stress was also a function of compressibility. For placebo pre-blends, ribbon density increased as normal stress increased. For active pre-blends, in addition to normal stress, ribbon density was also a function of gap. Models developed using placebo were found to predict ribbon densities of active blends with good accuracy and the prediction error decreased as the drug concentration of active blend decreased. Effective angle of internal friction and compressibility properties of active pre blend may be used as key indicators for predicting ribbon densities of active blend using placebo ribbon density model. Feasibility of on-line prediction of ribbon density during roller compaction was demonstrated using porosity-pressure data of pre-blend and normal stress

  18. E-LEARNING AS AN INSTRUMENT FOR CHANGE: THE PEDAGOGICAL DESIGN OF A TRAINING PROCESS

    Directory of Open Access Journals (Sweden)

    Manuel Lucer Fustes

    2010-02-01

    Full Text Available This paper presents the development and a summary of the results of a Training Experience implemented in the University of Extremadura. This experience is the innovative design of an online Postgraduate Course for Secondary School Teachers. The research team, which has been committed to online teaching for longer than a decade, began an innovative experience to test their singular conception of e-learning. So, a continuous process of group-negotiation began in order to design a course where the educational method should be the main part of the course. The design is innovative because of the tutorial approach and the learning evaluation process (as the quality of the evaluation is expected to be high although this is just implemented online. At present the results of the experience are being studied, however some strong and weak points have been already found out, so they might guide our teaching methods in order to get good practices for online learning.

  19. Soil thermal resistivity and thermal stability measuring instrument. Volume 2: Manual for operation and use of the thermal property analyzer and statistical weather analysis program to determine thermal design parameters

    Science.gov (United States)

    Boggs, S. A.; Radhakrishna, H. S.; Chu, F. Y.; Ford, G. L.; Griffin, J. D. A.; Steinmanis, J.

    1981-11-01

    Numerous considerations influence the thermal design of an underground power cable, including the soil thermal resistivity, thermal diffusivity and thermal stability. Each of these properties is a function of soil moisture which is in turn a function of past weather, soil composition, and biological burden. The Neher-McGrath formalism has been widely used for thermal cable design. However, this formalism assumes knowledge of soil thermal properties (resistivity and diffusivity). For design purposes, these parameters should be treated statistically, since weather varies greatly from year to year. As well, soil thermal property surveys are normally required along the route to assess the thermal quality of the native soil. This project is intended to fill the gap between the need to carry out thermal design and the use of the Neher-McGrath formalism which is normally employed. This goal has been addressed through: development of instrumentation and methods of measuring soil thermal properties in situ and in the laboratory; recommendation of methods for conducting soil surveys along a proposed cable route and of assessing the thermal quality of soils; and development of a computerized method to treat soil thermal design parameters on a statistical basis using computerized weather records as supplied by the US Environmental Data Service. The use of the methods and instrumentation developed as a result of this contract should permit less conservative thermal design thereby improving the economics of underground transmission. As well, these techniques and instrumentation facilitate weather-dependent prediction of cable ampacity for installed cables, monitoring of backfill thermal stability, and many other new practices.

  20. Design of Rail Instrumentation for Wind Tunnel Sonic Boom Measurements and Computational-Experimental Comparisons

    Science.gov (United States)

    Cliff, Susan E.; Elmiligui, A.; Aftosmis, M.; Morgenstern, J.; Durston, D.; Thomas, S.

    2012-01-01

    An innovative pressure rail concept for wind tunnel sonic boom testing of modern aircraft configurations with very low overpressures was designed with an adjoint-based solution-adapted Cartesian grid method. The computational method requires accurate free-air calculations of a test article as well as solutions modeling the influence of rail and tunnel walls. Specialized grids for accurate Euler and Navier-Stokes sonic boom computations were used on several test articles including complete aircraft models with flow-through nacelles. The computed pressure signatures are compared with recent results from the NASA 9- x 7-foot Supersonic Wind Tunnel using the advanced rail design.

  1. Deliberation on Design Strategies of Automatic Harvesting Systems: A Survey

    Directory of Open Access Journals (Sweden)

    Shivaji Bachche

    2015-06-01

    Full Text Available In Asia, decreasing farmer and labor populations due to various factors is a serious problem that leads to increases in labor costs, higher harvesting input energy consumption and less resource utilization. To solve these problems, researchers are engaged in providing long term and low-tech alternatives in terms of mechanization and automation of agriculture by way of efficient, low cost and easy to use solutions. This paper reviews various design strategies in recognition and picking systems, as well as developments in fruit harvesting robots during the past 30 years in several countries. The main objectives of this paper are to gather all information on fruit harvesting robots; focus on the technical developments so far achieved in picking devices; highlight the problems still to be solved; and discuss the future prospects of fruit harvesting robots.

  2. Manipulator Design and Operation for a Six-Degree-of-Freedom Handheld Tremor-Canceling Microsurgical Instrument.

    Science.gov (United States)

    Yang, Sungwook; MacLachlan, Robert A; Riviere, Cameron N

    2015-04-01

    This paper presents the design and actuation of a six-degree-of-freedom (6-DOF) manipulator for a handheld instrument, known as "Micron," which performs active tremor compensation during microsurgery. The design incorporates a Gough-Stewart platform based on piezoelectric linear motor, with a specified minimum workspace of a cylinder 4 mm long and 4 mm in diameter at the end-effector. Given the stall force of the motors and the loading typically encountered in vitreoretinal microsurgery, the dimensions of the manipulator are optimized to tolerate a transverse load of 0.2 N on a remote center of motion near the midpoint of the tool shaft. The optimization yields a base diameter of 23 mm and a height of 37 mm. The fully handheld instrument includes a custom-built optical tracking system for control feedback, and an ergonomic housing to serve as a handle. The manipulation performance was investigated in both clamped and handheld conditions. In positioning experiments with varying side loads, the manipulator tolerates side load up to 0.25 N while tracking a sinusoidal target trajectory with less than 20 μm error. Physiological hand tremor is reduced by about 90% in a pointing task, and error less than 25 μm is achieved in handheld circle-tracing.

  3. The Survey Questionnaire

    Science.gov (United States)

    Ritter, Lois A. Ed.; Sue, Valerie M., Ed.

    2007-01-01

    Internet-based surveys are still relatively new, and researchers are just beginning to articulate best practices for questionnaire design. Online questionnaire design has generally been guided by the principles applying to other self-administered instruments, such as paper-based questionnaires. Web-based questionnaires, however, have the potential…

  4. NASA's Design and Development of a Field Goniometer Instrument Using Solid Works

    Science.gov (United States)

    Turner, Mark; Sasaki, Glen; Jennings, Ernest (Technical Monitor)

    2000-01-01

    With NASA suffering severe funding cutbacks, engineers at NASA are required to produce state-of-the-art hardware with limited personnel and financial resources. In light of these constraints, the new NASA mandate is to build better, faster and cheaper. In April of 1998, Stennis Space Center's Commercial Remote Sensing Program contracted to the Systems Engineering Division at NASA Ames Research Center to develop a device known as a Field Goniometer. A Field Goniometer is a device that measures bi-directional reflectance of a target, such as vegetation, relative to the sun and an imaging system in an aircraft or spacecraft. The device is able to provide a spectral fingerprint of the surface it is measuring in wavelengths from 350nm-2500nm using a hyperspectral imager. To accomplish this project, several obstacles had to be overcome. First, the design had to be completed in less than four months. Second, due to the complexity of the design, the use of solid modeling was highly desirable but most of the group's solid modelers were assigned to other jobs. Third, the amount of funding available from the customer was one half to one third the funding typically expended for a job of this nature. Our choices for this project were to design with standard 2-D CAD systems currently used in-house or train additional engineers on our existing solids package or purchase a new solid model package. The use of a 2D CAD system was very undesirable due to the complexity of the design. Using our existing solids modeler would have required a learning curve for our engineers that would be incompatible with our schedule. Prior to this project, a member of our design group researched the solid modeling industry and decided to purchase SolidWorks. After examining the product for ease of use, modeling capability, training time required and cost, we decided our highest probability of success would be to design with Solidworks. During the design phase, our fabrication group was able to provide

  5. Design, calibration and error analysis of instrumentation for heat transfer measurements in internal combustion engines

    Science.gov (United States)

    Ferguson, C. R.; Tree, D. R.; Dewitt, D. P.; Wahiduzzaman, S. A. H.

    1987-01-01

    The paper reports the methodology and uncertainty analyses of instrumentation for heat transfer measurements in internal combustion engines. Results are presented for determining the local wall heat flux in an internal combustion engine (using a surface thermocouple-type heat flux gage) and the apparent flame-temperature and soot volume fraction path length product in a diesel engine (using two-color pyrometry). It is shown that a surface thermocouple heat transfer gage suitably constructed and calibrated will have an accuracy of 5 to 10 percent. It is also shown that, when applying two-color pyrometry to measure the apparent flame temperature and soot volume fraction-path length, it is important to choose at least one of the two wavelengths to lie in the range of 1.3 to 2.3 micrometers. Carefully calibrated two-color pyrometer can ensure that random errors in the apparent flame temperature and in the soot volume fraction path length will remain small (within about 1 percent and 10-percent, respectively).

  6. Coil design considerations for a high-frequency electromagnetic induction sensing instrument

    Science.gov (United States)

    Sigman, John B.; Barrowes, Benjamin E.; Wang, Yinlin; Bennett, Hollis J.; Simms, Janet E.; Yule, Donald E.; O'Neill, Kevin; Shubitidze, Fridon

    2016-05-01

    Intermediate electrical conductivity (IEC) materials (101S/m IEC objects. Recent analytical and numerical studies have showed that these targets exhibit characteristic quadrature response peaks at high induction frequencies (100kHz - 15MHz, the High Frequency Electromagnetic Induction (HFEMI) band), and they are not detectable with traditional ultra wideband (UWB) electromagnetic induction (EMI) metal detectors operating between 100Hz - 100kHz. Using the HFEMI band for induction sensing is not so simple as driving existing instruments at higher frequencies, though. At low frequency, EMI systems use more wire turns in transmit and receive coils to boost signal-to-noise ratios (SNR), but at higher frequencies, the transmitter current has non-uniform distribution along the coil length. These non-uniform currents change the spatial distribution of the primary magnetic field and disturb axial symmetry and thwart established approaches for inferring subsurface metallic object properties. This paper discusses engineering tradeoffs for sensing with a broader band of frequencies ever used for EMI sensing, with particular focus on coil geometries.

  7. Design, calibration and error analysis of instrumentation for heat transfer measurements in internal combustion engines

    Science.gov (United States)

    Ferguson, C. R.; Tree, D. R.; Dewitt, D. P.; Wahiduzzaman, S. A. H.

    1987-01-01

    The paper reports the methodology and uncertainty analyses of instrumentation for heat transfer measurements in internal combustion engines. Results are presented for determining the local wall heat flux in an internal combustion engine (using a surface thermocouple-type heat flux gage) and the apparent flame-temperature and soot volume fraction path length product in a diesel engine (using two-color pyrometry). It is shown that a surface thermocouple heat transfer gage suitably constructed and calibrated will have an accuracy of 5 to 10 percent. It is also shown that, when applying two-color pyrometry to measure the apparent flame temperature and soot volume fraction-path length, it is important to choose at least one of the two wavelengths to lie in the range of 1.3 to 2.3 micrometers. Carefully calibrated two-color pyrometer can ensure that random errors in the apparent flame temperature and in the soot volume fraction path length will remain small (within about 1 percent and 10-percent, respectively).

  8. The Design and Implementation of Instruments for Low-Frequency Electromagnetic Sounding of the Martian Subsurface

    Science.gov (United States)

    Delory, G. T.; Grimm, R. E.

    2003-01-01

    Low-frequency electromagnetic soundings of the subsurface can identify liquid water at depths ranging from hundreds of meters to approx. 10 km in an environment such as Mars. Among the tools necessary to perform these soundings are low-frequency electric and magnetic field sensors capable of being deployed from a lander or rover such that horizontal and vertical components of the fields can be measured free of structural or electrical interference. Under a NASA Planetary Instrument Definition and Development Program (PIDDP), we are currently engaged in the prototype stages of low frequency sensor implementations that will enable this technique to be performed autonomously within the constraints of a lander platform. Once developed, this technique will represent both a complementary and alternative method to orbital radar sounding investigations, as the latter may not be able to identify subsurface water without significant ambiguities. Low frequency EM methods can play a crucial role as a ground truth measurement, performing deep soundings at sites identified as high priority areas by orbital radars. Alternatively, the penetration depth and conductivity discrimination of low-frequency methods may enable detection of subsurface water in areas that render radar methods ineffective. In either case, the sensitivity and depth of penetration inherent in low frequency EM exploration makes this tool a compelling candidate method to identify subsurface liquid water from a landed platform on Mars or other targets of interest.

  9. The Large Area Radio Galaxy Evolution Spectroscopic Survey (LARGESS): survey design, data catalogue and GAMA/WiggleZ spectroscopy

    Science.gov (United States)

    Ching, John H. Y.; Sadler, Elaine M.; Croom, Scott M.; Johnston, Helen M.; Pracy, Michael B.; Couch, Warrick J.; Hopkins, A. M.; Jurek, Russell J.; Pimbblet, K. A.

    2017-01-01

    We present the Large Area Radio Galaxy Evolution Spectroscopic Survey (LARGESS), a spectroscopic catalogue of radio sources designed to include the full range of radio AGN populations out to redshift z ˜ 0.8. The catalogue covers ˜800 deg2 of sky, and provides optical identifications for 19 179 radio sources from the 1.4 GHz Faint Images of the Radio Sky at Twenty-cm (FIRST) survey down to an optical magnitude limit of imod teams, we have obtained new spectra for over 5000 objects in the LARGESS sample. Combining these new spectra with data from earlier surveys provides spectroscopic data for 12 329 radio sources in the survey area, of which 10 856 have reliable redshifts. 85 per cent of the LARGESS spectroscopic sample are radio AGN (median redshift z = 0.44), and 15 per cent are nearby star-forming galaxies (median z = 0.08). Low-excitation radio galaxies (LERGs) comprise the majority (83 per cent) of LARGESS radio AGN at z formation as well as a classical accretion disc.

  10. Technique development of PC104 embedded module and its application in the geophysical instrument design

    Institute of Scientific and Technical Information of China (English)

    滕云田; 张炼; 王彦; 刘晓芹; 马延妮

    2002-01-01

    The mainstream embedded resolutions widely adopted in the geophysical observation device are discussed in this paper. The advantages and its applicability of the PC104 embedded module are demonstrated through its performance description, technique development and its applications in the design of the fluxgate magnetometer, the movable seismograph and the GPS steering device.

  11. The study design and characteristics of the Danish national health interview surveys

    DEFF Research Database (Denmark)

    Ekholm, Ola; Hesse, Ulrik; Davidsen, Michael;

    2009-01-01

    AIMS: The Danish National Institute of Public Health, University of Southern Denmark has carried out national representative health interview surveys among adult Danes in 1987, 1994, 2000 and 2005. The aim of this study is to describe the characteristics of the design, including the response rate...... to the Danish population. However, these surveys are essential, as the information collected cannot be gathered by means of official statistical registers. Hence, efforts to increase the response rate will be important in the forthcoming surveys....... of the four surveys. METHODS: The samples in 1987 and 1994 are based on simple random sampling. The samples in 2000 and 2005 are based on stratified random sampling. In addition, all invited to the survey in 1994 were re-invited in both 2000 and 2005. Data were collected via face-to-face interview...

  12. Incomplete categorical data design non-randomized response techniques for sensitive questions in surveys

    CERN Document Server

    Tian, Guo-Liang

    2013-01-01

    Respondents to survey questions involving sensitive information, such as sexual behavior, illegal drug usage, tax evasion, and income, may refuse to answer the questions or provide untruthful answers to protect their privacy. This creates a challenge in drawing valid inferences from potentially inaccurate data. Addressing this difficulty, non-randomized response approaches enable sample survey practitioners and applied statisticians to protect the privacy of respondents and properly analyze the gathered data.Incomplete Categorical Data Design: Non-Randomized Response Techniqu

  13. Design of optimal fast scanning trajectory for the mechanical scanner of measurement instruments.

    Science.gov (United States)

    Ju, Bing-Feng; Bai, Xiaolong; Chen, Jian; Ge, Yaozheng

    2014-01-01

    This paper focuses on the design of the optimal scanning mode for the family of scanning probe microscopes. Based on different values of the maximum acceleration (deceleration) rate and maximum speed of X- and Y- axes of the mechanical scanner encountered in practice due to different mechanical design and loads, the design procedure of the optimal fast scanning mode is presented, which is found to be sensitive to the specific parameters of the scanning motion. By utilizing the simultaneous motion of the two axes, the fast raster scanning mode proposed can improve the scanning efficiency by 29% when comparing with the conventional raster (CR) scanning mode, if the scanning speeds of both axes are identical. In addition, the optimal fast mode provided by us has no effects on the image accuracy such as image degradation, image distortion when the efficiency is evaluated. No further difficulties are introduced to the control of the mechanical scanner and the data acquisition process. This optimal scanning mode is useful when the response time of the probe is very fast (such as ultrasonic probe in scanning acoustic microscope (SAM)), and the main limitations are due to the mechanical scanner. By applying different loads for both axes, the experiments with different scanning areas and scanning modes are conducted in a self-developed SAM. Experimental results coincide with the theoretical analysis and confirm the validation of our proposed optimal fast scanning mode and its superiority over the CR scanning mode.

  14. The balanced scorecard as a potential instrument for supporting planning and improvement in accounting education: Comparative survey findings

    Directory of Open Access Journals (Sweden)

    CJ Cronje

    2015-04-01

    Full Text Available This paper is firstly a comparison of the components of a potential balanced scorecard for accounting departments of universities in South Africa and Australia. Secondly, the various suggested measurement criteria of the balanced scorecard components are also compared. The findings of the research paper indicate no significant differences. The conclusion is that the balanced scorecard constitutes a potential instrument for supporting the planning and improvement of the accounting education environment.

  15. Validation of the Care-Related Quality of Life Instrument in different study settings: findings from The Older Persons and Informal Caregivers Survey Minimum DataSet (TOPICS-MDS).

    Science.gov (United States)

    Lutomski, J E; van Exel, N J A; Kempen, G I J M; Moll van Charante, E P; den Elzen, W P J; Jansen, A P D; Krabbe, P F M; Steunenberg, B; Steyerberg, E W; Olde Rikkert, M G M; Melis, R J F

    2015-05-01

    Validity is a contextual aspect of a scale which may differ across sample populations and study protocols. The objective of our study was to validate the Care-Related Quality of Life Instrument (CarerQol) across two different study design features, sampling framework (general population vs. different care settings) and survey mode (interview vs. written questionnaire). Data were extracted from The Older Persons and Informal Caregivers Minimum DataSet (TOPICS-MDS, www.topics-mds.eu ), a pooled public-access data set with information on >3,000 informal caregivers throughout the Netherlands. Meta-correlations and linear mixed models between the CarerQol's seven dimensions (CarerQol-7D) and caregiver's level of happiness (CarerQol-VAS) and self-rated burden (SRB) were performed. The CarerQol-7D dimensions were correlated to the CarerQol-VAS and SRB in the pooled data set and the subgroups. The strength of correlations between CarerQol-7D dimensions and SRB was weaker among caregivers who were interviewed versus those who completed a written questionnaire. The directionality of associations between the CarerQol-VAS, SRB and the CarerQol-7D dimensions in the multivariate model supported the construct validity of the CarerQol in the pooled population. Significant interaction terms were observed in several dimensions of the CarerQol-7D across sampling frame and survey mode, suggesting meaningful differences in reporting levels. Although good scientific practice emphasises the importance of re-evaluating instrument properties in individual research studies, our findings support the validity and applicability of the CarerQol instrument in a variety of settings. Due to minor differential reporting, pooling CarerQol data collected using mixed administration modes should be interpreted with caution; for TOPICS-MDS, meta-analytic techniques may be warranted.

  16. Designing questionnaires: healthcare survey to compare two different response scales

    Science.gov (United States)

    2014-01-01

    Background A widely discussed design issue in patient satisfaction questionnaires is the optimal length and labelling of the answering scale. The aim of the present study was to compare intra-individually the answers on two response scales to five general questions evaluating patients’ perception of hospital care. Methods Between November 2011 and January 2012, all in-hospital patients at a Swiss University Hospital received a patient satisfaction questionnaire on an adjectival scale with three to four labelled categories (LS) and five redundant questions displayed on an 11-point end-anchored numeric scale (NS). The scales were compared concerning ceiling effect, internal consistency (Cronbach’s alpha), individual item answers (Spearman’s rank correlation), and concerning overall satisfaction by calculating an overall percentage score (sum of all answers related to the maximum possible sum). Results The response rate was 41% (2957/7158), of which 2400 (81%) completely filled out all questions. Baseline characteristics of the responders and non-responders were similar. Floor and ceiling effect were high on both response scales, but more pronounced on the LS than on the NS. Cronbach’s alpha was higher on the NS than on the LS. There was a strong individual item correlation between both answering scales in questions regarding the intent to return, quality of treatment and the judgement whether the patient was treated with respect and dignity, but a lower correlation concerning satisfactory information transfer by physicians or nurses, where only three categories were available in the LS. The overall percentage score showed a comparable distribution, but with a wider spread of lower satisfaction in the NS. Conclusions Since the longer scale did not substantially reduce the ceiling effect, the type of questions rather than the type of answering scale could be addressed with a focus on specific questions about concrete situations instead of general questions

  17. Comparison of response patterns in different survey designs: a longitudinal panel with mixed-mode and online-only design.

    Science.gov (United States)

    Rübsamen, Nicole; Akmatov, Manas K; Castell, Stefanie; Karch, André; Mikolajczyk, Rafael T

    2017-01-01

    Increasing availability of the Internet allows using only online data collection for more epidemiological studies. We compare response patterns in a population-based health survey using two survey designs: mixed-mode (choice between paper-and-pencil and online questionnaires) and online-only design (without choice). We used data from a longitudinal panel, the Hygiene and Behaviour Infectious Diseases Study (HaBIDS), conducted in 2014/2015 in four regions in Lower Saxony, Germany. Individuals were recruited using address-based probability sampling. In two regions, individuals could choose between paper-and-pencil and online questionnaires. In the other two regions, individuals were offered online-only participation. We compared sociodemographic characteristics of respondents who filled in all panel questionnaires between the mixed-mode group (n = 1110) and the online-only group (n = 482). Using 134 items, we performed multinomial logistic regression to compare responses between survey designs in terms of type (missing, "do not know" or valid response) and ordinal regression to compare responses in terms of content. We applied the false discovery rates (FDR) to control for multiple testing and investigated effects of adjusting for sociodemographic characteristic. For validation of the differential response patterns between mixed-mode and online-only, we compared the response patterns between paper and online mode among the respondents in the mixed-mode group in one region (n = 786). Respondents in the online-only group were older than those in the mixed-mode group, but both groups did not differ regarding sex or education. Type of response did not differ between the online-only and the mixed-mode group. Survey design was associated with different content of response in 18 of the 134 investigated items; which decreased to 11 after adjusting for sociodemographic variables. In the validation within the mixed-mode, only two of those were among the 11 significantly

  18. Market assessment for active solar heating and cooling products. Category B: A survey of decision makers in the HVAC market place. Survey instruments

    Energy Technology Data Exchange (ETDEWEB)

    Lilien, G. L.; Johnston, P. E.

    1980-09-01

    Telephone screener questionnaires and mail-out questionnaires for marketing surveys for solar heating and cooling equipment are presented. Questionnaires are included for the residential segment, industrial segment, HVAC professionals segment, builder/developer segment, and the commercial segment. No results are reported. (WHK)

  19. Mechanical Design and Testing of an Instrumented Rocker-Bogie Mobility System for the Kapvik Micro-Rover

    Science.gov (United States)

    Setterfield, T.

    The rocker-bogie mobility system is a six-wheeled mobility system with the ability to equilibrate ground pressure amongst its wheels and traverse obstacles up to one wheel diameter in height; it has been used previously on NASA's Sojourner, Spirit, Opportunity and Curiosity rovers. This paper presents the mechanical design of an instrumented rocker-bogie mobility system for Kapvik, a 30 kg planetary micro-rover prototype developed for the Canadian Space Agency. The design of the wheel drive system is presented, including: motor selection, gear train selection, and performance limits. The design of a differential mechanism, which minimizes the pitch angle of the rover body, is provided. Design considerations for the integration of single-axis force sensors above the wheel hubs are presented. Structural analysis of the rocker and bogie links is outlined. The cross-hill and uphill-downhill static stability of Kapvik is investigated. Load cell and joint position data from testing during obstacle negotiation and uphill operation are presented.

  20. Design and evaluation of a low-cost instrumented glove for hand function assessment

    Directory of Open Access Journals (Sweden)

    Oess Ninja P

    2012-01-01

    Full Text Available Abstract Background The evaluation of hand function impairment following a neurological disorder (stroke and cervical spinal cord injury requires sensitive, reliable and clinically meaningful assessment tools. Clinical performance measures of hand function mainly focus on the accomplishment of activities of daily living (ADL, typically rather complex tasks assessed by a gross ordinal rating; while the motor performance (i.e. kinematics is less detailed. The goal of this study was to develop a low-cost instrumented glove to capture details in grasping, feasible for the assessment of hand function in clinical practice and rehabilitation settings. Methods Different sensor types were tested for output signal stability over time by measuring the signal drift of their step responses. A system that converted sensor output voltages into angles based on pre-measured curves was implemented. Furthermore, the voltage supply of each sensor signal conditioning circuit was increased to enhance the sensor resolution. The repeatability of finger bending trajectories, recorded during the performance of three ADL-based tasks, was established using the intraclass correlation coefficient (ICC. Moreover, the accuracy of the glove was evaluated by determining the agreement between angles measured with the embedded sensors and angles measured by traditional goniometry. In addition, the feasibility of the glove was tested in four patients with a pathological hand function caused by a cervical spinal cord injury (cSCI. Results A sensor type that displayed a stable output signal over time was identified, and a high sensor resolution of 0.5° was obtained. The evaluation of the glove's reliability yielded high ICC values (0.84 to 0.92 with an accuracy error of about ± 5°. Feasibility testing revealed that the glove was sensitive to distinguish different levels of hand function impairment in cSCI patients. Conclusions The device satisfied the desired system requirements

  1. “Visual design and dance”: dance as a research instrument

    OpenAIRE

    Cristina Barbiani

    2012-01-01

    The paper describes an unpublished document written by the choreographer Anna Halprin in 1943, aimed to organize a dance course entitled "Visual design and dance" for the students of the Barbara Mettler’s School in New Hampshire. In a moment in which modern dance had reached a great expansion in spite of the Second World War, the young Anna resigned the opportunity to dance on the Broadway stages, where were performing the best choreographers such as Martha Graham, Doris Humphrey and Hanya Ho...

  2. 50 CFR 600.1417 - Requirements for exempted state designation based on submission of recreational survey data.

    Science.gov (United States)

    2010-10-01

    ... Jersey, Pennsylvania, Delaware, Maryland, Virginia, North Carolina, South Carolina, Georgia and Florida (Atlantic coast); (ii) Florida (Gulf of Mexico coast), Alabama, Mississippi, Louisiana, and Texas; (iii... the state's participation in a qualifying regional survey, and the survey's sample design, data...

  3. Development of a Survey Instrument to Measure TEFL Academics' Perceptions about, Individual and Workplace Characteristics for Conducting Research

    Science.gov (United States)

    Bai, Li; Hudson, Peter; Millwater, Jan; Tones, Megan

    2013-01-01

    A 30-item survey was devised to determine Chinese TEFL (Teaching English as a Foreign Language) academics' potential for conducting research. A five-part Likert scale was used to gather data from 182 academics on four factors: (1) perceptions on teaching-research nexus, (2) personal perspectives for conducting research, (3) predispositions for…

  4. Relationships Among the Knowledge, Efficacy, and Practices Instrument, Color-Blind Racial Attitudes Scale, Deamonte Driver Survey, and Defining Issues Test 2.

    Science.gov (United States)

    Behar-Horenstein, Linda S; Garvan, Cynthia W

    2016-03-01

    Concordance studies indicate the degree to which instruments measure the same or similar constructs or something different. The aims of this study were to identify the factor structure of the Deamonte Driver Survey and determine the relationship between the Deamonte Driver (a measure of social class stereotyping), the Defining Issues Test 2 (DIT2; a measure of ethical sensitivity), the Color-Blind Racial Attitudes Scale (CoBRAS; a measure of racial stereotyping), and the Knowledge, Efficacy, and Practices Instrument (KEPI; a measure of cultural competence). The results showed a three-factor solution for the Deamonte Driver Survey and significant relationships between CoBRAS and DIT2 subscales and between CoBRAS and Deamonte Driver subscales. Significant relationships between the measures and exploratory variables, underrepresented minority status, age, citizenship, marital status, political stance, English as a first language, and gender were found. The lack of a significant relationship between the KEPI and Deamonte Driver, DIT2, or CoBRAS subscales suggests that the KEPI is measuring a unique construct. These findings showed how these scales contributed to the assessment of cultural competence among dental students and faculty.

  5. The Flare Irradiance Spectral Model (FISM) and its Contributions to Space Weather Research, the Flare Energy Budget, and Instrument Design

    Science.gov (United States)

    Chamberlin, Phillip

    2008-01-01

    The Flare Irradiance Spectral Model (FISM) is an empirical model of the solar irradiance spectrum from 0.1 to 190 nm at 1 nm spectral resolution and on a 1-minute time cadence. The goal of FISM is to provide accurate solar spectral irradiances over the vacuum ultraviolet (VUV: 0-200 nm) range as input for ionospheric and thermospheric models. The seminar will begin with a brief overview of the FISM model, and also how the Solar Dynamics Observatory (SDO) EUV Variability Experiment (EVE) will contribute to improving FISM. Some current studies will then be presented that use FISM estimations of the solar VUV irradiance to quantify the contributions of the increased irradiance from flares to Earth's increased thermospheric and ionospheric densites. Initial results will also be presented from a study looking at the electron density increases in the Martian atmosphere during a solar flare. Results will also be shown quantifying the VUV contributions to the total flare energy budget for both the impulsive and gradual phases of solar flares. Lastly, an example of how FISM can be used to simplify the design of future solar VUV irradiance instruments will be discussed, using the future NOAA GOES-R Extreme Ultraviolet and X-Ray Sensors (EXIS) space weather instrument.

  6. Isothermal titration calorimetry for drug design: Precision of the enthalpy and binding constant measurements and comparison of the instruments.

    Science.gov (United States)

    Linkuvienė, Vaida; Krainer, Georg; Chen, Wen-Yih; Matulis, Daumantas

    2016-12-15

    Isothermal titration calorimetry (ITC) is one of the most robust label- and immobilization-free techniques used to measure protein - small molecule interactions in drug design for the simultaneous determination of the binding affinity (ΔG) and the enthalpy (ΔH), both of which are important parameters for structure-thermodynamics correlations. It is important to evaluate the precision of the method and of various ITC instrument models by performing a single well-characterized reaction. The binding between carbonic anhydrase II and acetazolamide was measured by four ITC instruments - PEAQ-ITC, iTC200, VP-ITC, and MCS-ITC and the standard deviation of ΔG and ΔH was determined. Furthermore, the limit of an approach to reduce the protein concentration was studied for a high-affinity reaction (Kd = 0.3 nM), too tight to be measured by direct (non-displacement) ITC. Chemical validation of the enthalpy measurements is discussed. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Design of New Physiotherapy Instrument Based on PWM%基于PWM的新型理疗仪设计

    Institute of Scientific and Technical Information of China (English)

    陈海军; 温志浩

    2013-01-01

    STM32 as the main chip, we design a novel electrical pulse physiotherapy instrument which realize pulse width modulation (PWM) by timer set ing, then get the needed treatment waveform after signal conditioning, power ampliifer, and output control. The experimental results show that, physiotherapy instrument is stable and reliable, physical strength large adjustable range, which can be suitable for the vast majority of the crowd;and the output waveform is smooth, without burr, there were no obvious pain, obvious physical therapy effect.%利用S T M32作为主控芯片,设计了一种新型中频电脉冲理疗仪,通过微秒级定时器设置实现高精度脉宽调制(P W M)功能,经过信号调理、功率放大以及输出控制得到所需要的治疗波形。实验结果表明,理疗仪工作稳定可靠,理疗强度可调幅度大,可适合绝大多数人群;输出波形光滑、无毛刺、病人无明显刺痛感,理疗效果明显。

  8. The Double Star magnetic field investigation: instrument design, performance and highlights of the first year's observations

    Directory of Open Access Journals (Sweden)

    C. Carr

    2005-11-01

    Full Text Available One of the primary objectives of the Double Star mission is the accurate measurement of the magnetic field vector along the orbits of the two spacecraft. The magnetic field is an essential parameter for the understanding of space plasma processes and is also required for the effective interpretation of data from the other instruments on the spacecraft. We present the design of the magnetic field instrument onboard both of the Double Star spacecraft and an overview of the performance as measured first on-ground and then in-orbit. We also report the results of in-flight calibration of the magnetometers, and the processing methods employed to produce the final data products which are provided to Double Star investigators, and the wider community in general. Particular attention is paid to the techniques developed for removing magnetic interference generated by the solar arrays on the first (equatorial orbiting spacecraft. Results from the first year of operations are reviewed in the context of combined observations by Double Star and Cluster, and examples given from the different regions visited by the spacecraft to date.

  9. Design, Building and Testing of a Sun Calibration Mechanism for the MSI-VNS Instrument on EarthCARE

    Science.gov (United States)

    Tabak, Erik; de Goeij, Bryan; van Riel, Luud; Meijer, Ellart; van der Knaap, Frits; Doornink, Jan; de Graaf, Harm-Jan

    2013-09-01

    TNO has developed a mechanism to perform sun and dark calibration as a module of the Visible-NIR-SWIR Optical Unit (VNS) in the context of the ESA EarthCARE mission. This paper will address the conceptual and detailed design and modelling approach of the mechanism. Finally the production and testing of the Life Test Model (LTM) will be presented.The rotating part of the mechanism (calibration carousel) is the supporting structure of the instrument calibration diffusers. By rotating the carousel either the instrument nominal, sun calibration or dark calibration/safe modes can be selected. The calibration carousel is suspended in (a.o.) hard preloaded angular contact bearings and driven by a Phytron stepper motor. FE Modelling has been used to derive the bearing- and motor forces and accelerations. These analysis results were used as input to the CABARET analyses performed by ESTL (UK). Using the analysis results the bearing stress, stiffness, gapping and friction torque were predicted.A flight representative Life Test Model (LTM) has been manufactured assembled and was successfully subjected to ground cycles testing, vibration-, thermal vacuum- and life cycle testing.

  10. “Visual design and dance”: dance as a research instrument

    Directory of Open Access Journals (Sweden)

    Cristina Barbiani

    2012-11-01

    Full Text Available The paper describes an unpublished document written by the choreographer Anna Halprin in 1943, aimed to organize a dance course entitled "Visual design and dance" for the students of the Barbara Mettler’s School in New Hampshire. In a moment in which modern dance had reached a great expansion in spite of the Second World War, the young Anna resigned the opportunity to dance on the Broadway stages, where were performing the best choreographers such as Martha Graham, Doris Humphrey and Hanya Holm, to undertake a personal and innovative research of experimentation, of which this document is witness and where is already possible recognize the influence of her husband, landscape architect Lawrence Halprin, and the stimulating environment of Harvard and the Bauhaus masters as Walter Gropius and Lazlo Moholy-Nagy.

  11. Blind Extragalactic HI Surveys with the Arecibo and Green Bank Telescopes: I. Simulations and Strategies for Survey Design

    Science.gov (United States)

    Giovanelli, R.; Haynes, M. P.; Spekkens, K.; Springob, C. M.; Masters, K. L.; Saintonge, A.; Catinella, B.; Kent, B.; Maddalena, R. J.; Magnani, L.; Koopmann, R. A.

    2003-12-01

    The currently popular Λ CDM framework of evolution of cosmic structure predicts a population of low mass halos that far exceeds that of dwarf galaxies. Low mass halos could, however, have retained little of their initial baryonic mass fraction, and their star formation efficiency could be very low. The possibility of detecting such systems in the 21 cm HI line has been investigated by several teams, and blind extragalactic HI surveys have been undertaken to date, pushing estimates of the HI Mass Function to limits approaching 107 M⊙ (Zwaan et al. 1997, Rosenberg and Schneider 2002, Zwaan et al. 2003). Extrapolations of those estimates to 106 M⊙ disagree with each other quite substantially. Since these low mass objects may represent the population of low mass halos predicted to exist by numerical Λ CDM simulations, the determination of their space density and its possible dependence on galaxy environment remains an important goal. Systems of very low HI mass can only be detected at relatively small distances. It thus becomes important to optimize the survey design, matching it to the local characteristics of the cosmic density field. We present results of various survey simulations, some currently underway with the single-beam Arecibo and Green Bank telescopes and future ones that will be enabled with the advent of the Arecibo L-band feed array in late 2004. This work is partially funded by NSF grant AST-0307661.

  12. Application of a Modified Universal Design Survey for Evaluation of Ares 1 Ground Crew Worksites

    Science.gov (United States)

    Blume, Jennifer L.

    2010-01-01

    Operability is a driving requirement for NASA's Ares 1 launch vehicle. Launch site ground operations include several operator tasks to prepare the vehicle for launch or to perform maintenance. Ensuring that components requiring operator interaction at the launch site are designed for optimal human use is a high priority for operability. To support design evaluation, the Ares 1 Upper Stage (US) element Human Factors Engineering (HFE) group developed a survey based on the Universal Design approach. Universal Design is a process to create products that can be used effectively by as many people as possible. Universal Design per se is not a priority for Ares 1 because launch vehicle processing is a specialized skill and not akin to a consumer product that should be used by all people of all abilities. However, applying principles of Universal Design will increase the probability of an error free and efficient design which is a priority for Ares 1. The Design Quality Evaluation Survey centers on the following seven principles: (1) Equitable use, (2) Flexibility in use, (3) Simple and intuitive use, (4) Perceptible information, (5) Tolerance for error, (6) Low physical effort, (7) Size and space for approach and use. Each principle is associated with multiple evaluation criteria which were rated with the degree to which the statement is true. All statements are phrased in the utmost positive, or the design goal so that the degree to which judgments tend toward "completely agree" directly reflects the degree to which the design is good. The Design Quality Evaluation Survey was employed for several US analyses. The tool was found to be most useful for comparative judgments as opposed to an assessment of a single design option. It provided a useful piece of additional data when assessing possible operator interfaces or worksites for operability

  13. Design of the mirror optical systems for coherent diffractive imaging at the SPB/SFX instrument of the European XFEL

    Science.gov (United States)

    Bean, Richard J.; Aquila, Andrew; Samoylova, Liubov; Mancuso, Adrian P.

    2016-07-01

    The high degree of spatial coherence and extreme pulse energies available at x-ray free electron laser (XFEL) sources naturally support coherent diffractive imaging applications. In order to optimally exploit these unique properties, the optical systems at XFELs must be highly transmissive, focus to appropriate sizes matched to the scale of samples to be investigated and must minimally perturb the wavefront of the XFEL beam. We present the design and simulated performance of two state-of-the-art Kirkpatrik-Baez mirror systems that form the primary foci of the single particles, clusters and biomolecules and serial femtosecond crystallography (SPB/SFX) instrument of the European XFEL. The two systems, presently under construction, will produce 1 μm and 100 nm scale foci across a 3-16 keV photon energy range. Targeted applications include coherent imaging of weakly scattering, often biological, specimens.

  14. Simulating future uncertainty to guide the selection of survey designs for long-term monitoring

    Science.gov (United States)

    Garman, Steven L.; Schweiger, E. William; Manier, Daniel J.; Gitzen, Robert A.; Millspaugh, Joshua J.; Cooper, Andrew B.; Licht, Daniel S.

    2012-01-01

    A goal of environmental monitoring is to provide sound information on the status and trends of natural resources (Messer et al. 1991, Theobald et al. 2007, Fancy et al. 2009). When monitoring observations are acquired by measuring a subset of the population of interest, probability sampling as part of a well-constructed survey design provides the most reliable and legally defensible approach to achieve this goal (Cochran 1977, Olsen et al. 1999, Schreuder et al. 2004; see Chapters 2, 5, 6, 7). Previous works have described the fundamentals of sample surveys (e.g. Hansen et al. 1953, Kish 1965). Interest in survey designs and monitoring over the past 15 years has led to extensive evaluations and new developments of sample selection methods (Stevens and Olsen 2004), of strategies for allocating sample units in space and time (Urquhart et al. 1993, Overton and Stehman 1996, Urquhart and Kincaid 1999), and of estimation (Lesser and Overton 1994, Overton and Stehman 1995) and variance properties (Larsen et al. 1995, Stevens and Olsen 2003) of survey designs. Carefully planned, “scientific” (Chapter 5) survey designs have become a standard in contemporary monitoring of natural resources. Based on our experience with the long-term monitoring program of the US National Park Service (NPS; Fancy et al. 2009; Chapters 16, 22), operational survey designs tend to be selected using the following procedures. For a monitoring indicator (i.e. variable or response), a minimum detectable trend requirement is specified, based on the minimum level of change that would result in meaningful change (e.g. degradation). A probability of detecting this trend (statistical power) and an acceptable level of uncertainty (Type I error; see Chapter 2) within a specified time frame (e.g. 10 years) are specified to ensure timely detection. Explicit statements of the minimum detectable trend, the time frame for detecting the minimum trend, power, and acceptable probability of Type I error (

  15. Design, development and verification of the 30 and 44 GHz front-end modules for the Planck Low Frequency Instrument

    Energy Technology Data Exchange (ETDEWEB)

    Davis, R J; Wilkinson, A; Davies, R D; Winder, W F; Roddis, N; Blackhurst, E J; Lawson, D; Lowe, S R; Baines, C; Butlin, M; Galtress, A; Shepherd, D [Jodrell Bank Centre for Astrophysics, The University of Manchester, Manchester, M13 9PL (United Kingdom); Aja, B; Artal, E [Departamento de IngenierIa de Comunicaciones, Universidad de Cantabria, Avenida de los Castros s/n. 39005 Santander (Spain); Bersanelli, M [Dipartimento di Fisica, Universita degli Studi di Milano, Via Celoria 16, 20133 Milano (Italy); Butler, R C; Cuttaia, F [INAF IASF Bologna, Via Gobetti, 101, 40129, Bologna (Italy); Castelli, C [Science and Technology Facilities Council, Swindon, Wiltshire, SN2 1SZ (United Kingdom); D' Arcangelo, O [IFP-CNR, Via Cozzi 53, Milano (Italy); Gaier, T, E-mail: Richard.Davis@manchester.ac.u [Jet Propulsion Laboratory, Pasadena, California (United States)

    2009-12-15

    We give a description of the design, construction and testing of the 30 and 44 GHz Front End Modules (FEMs) for the Low Frequency Instrument (LFI) of the Planck mission to be launched in 2009. The scientific requirements of the mission determine the performance parameters to be met by the FEMs, including their linear polarization characteristics. The FEM design is that of a differential pseudo-correlation radiometer in which the signal from the sky is compared with a 4-K blackbody load. The Low Noise Amplifier (LNA) at the heart of the FEM is based on indium phosphide High Electron Mobility Transistors (HEMTs). The radiometer incorporates a novel phase-switch design which gives excellent amplitude and phase match across the band. The noise temperature requirements are met within the measurement errors at the two frequencies. For the most sensitive LNAs, the noise temperature at the band centre is 3 and 5 times the quantum limit at 30 and 44 GHz respectively. For some of the FEMs, the noise temperature is still falling as the ambient temperature is reduced to 20 K. Stability tests of the FEMs, including a measurement of the 1/f knee frequency, also meet mission requirements. The 30 and 44 GHz FEMs have met or bettered the mission requirements in all critical aspects. The most sensitive LNAs have reached new limits of noise temperature for HEMTs at their band centres. The FEMs have well-defined linear polarization characteristics.

  16. Theoretical design and field deployment of a dense strong motion instrument network for the Alpine Fault, South Island, New Zealand.

    Science.gov (United States)

    Francois, C.; Berril, J.; Pettinga, J.

    2003-04-01

    A dense network of strong motion seismometers is being developed in order to investigate the complexities of the upper crustal rupture process and propagation of major seismogenic sources such as the Alpine Fault and strands of the Marlborough Fault System defining the South Island sector of the Australia-Pacific plate boundary zone. The proposed network is designed as a dense array of approximately 20 accelerographs using the University of Canterbury 12-bit CUSP instrument, now nearing development completion. It will be deployed straddling the Alpine Fault in the central West Coast region of the South Island, and coverage will extend across the region at the Alpine-Hope Fault junction also. The array layout is being designed utilizing the frequency-analysis MUSIC method (Multiple Signal Characterization) developed by Goldstein and Archuleta (1991a&b). Synthetic strong-motion records were computed using an empirical Green's function synthetic seismogram program EMPSYN (Hutchings, 1987). The process of finding an optimal network configuration is dependent on the geometry of the array (study of the frequency analysis performance of the modelled earthquake data for various proposed array configurations), and on the instrument site conditions (geology, communications, accessibility, isolation etc). References Goldstein, P. and R. J. Archuleta (1991a). "Deterministic frequency-wavenumber methods and direct measurements of rupture propagation during earthquakes using a dense array; data analysis." Journal of Geophysical Research, B, Solid Earth and Planets 96(4): 6187-6198. Goldstein, P. and R. J. Archuleta (1991b). "Deterministic frequency-wavenumber methods and direct measurements of rupture propagation during earthquakes using a dense array; theory and methods." Journal of Geophysical Research, B, Solid Earth and Planets 96(4): 6173-6185. Hutchings, L. J. (1987). "Modelling strong earthquake ground motion with empirical Green's function", Ph.D. thesis, Department of

  17. Design and Instrumentation of a Measurement and Calibration System for an Acoustic Telemetry System

    Directory of Open Access Journals (Sweden)

    Zhiqun Deng

    2010-03-01

    Full Text Available The Juvenile Salmon Acoustic Telemetry System (JSATS is an active sensing technology developed by the U.S. Army Corps of Engineers, Portland District, for detecting and tracking small fish. It is used primarily for evaluating behavior and survival of juvenile salmonids migrating through the Federal Columbia River Power System to the Pacific Ocean. It provides critical data for salmon protection and development of more “fish-friendly” hydroelectric facilities. The objective of this study was to design and build a Measurement and Calibration System (MCS for evaluating the JSATS components, because the JSATS requires comprehensive acceptance and performance testing in a controlled environment before it is deployed in the field. The MCS consists of a reference transducer, a water test tank lined with anechoic material, a motion control unit, a reference receiver, a signal conditioner and amplifier unit, a data acquisition board, MATLAB control and analysis interface, and a computer. The fully integrated MCS has been evaluated successfully at various simulated distances and using different encoded signals at frequencies within the bandwidth of the JSATS transmitter. The MCS provides accurate acoustic mapping capability in a controlled environment and automates the process that allows real-time measurements and evaluation of the piezoelectric transducers, sensors, or the acoustic fields. The MCS has been in use since 2009 for acceptance and performance testing of, and further improvements to, the JSATS.

  18. An analysis of determinants influencing use of ayurvedic medication in Pune region utilizing a questionnaire survey instrument

    Directory of Open Access Journals (Sweden)

    Vyawahare Neeraj

    2009-01-01

    The survey revealed that consumption of Ayurvedic medication in Pune region is increasing, wherein safety and faith are important parameters, however, like allopathic medication; people usually stick to the prescription issued by the physician. The increasing trend of self medication and lack of knowledge of herb drug interaction especially in non graduates are the major concerns need to be addressed for better outcome of the therapy.

  19. A Study on Preference of Interface Design Techniques for Web Survey

    Directory of Open Access Journals (Sweden)

    Settapong Malisuwan

    2012-09-01

    Full Text Available According to the advancement in internet and web-based application, the survey via the internet has been increasingly utilized due to its convenience and time saving. This article studied the influence of five web-design techniques - screen design, response format, logo type, progress indicator, and image display on the interest of the respondents. Two screen display designs from each design technique were made for selection. Focus group discussion technique was conducted on the four groups of Y generation participants with different characteristics. Open discussion was performed to identify additional design factors that will affect the interest of the questionnaire. The study found the degree of influence of all related design factors can be ranked from screen design, response format, font type, logo type, background color, progress indicator, and image display respectively.

  20. Research and Development on a Public Attitude Instrument for Stuttering

    Science.gov (United States)

    St. Louis, Kenneth O.

    2012-01-01

    This paper summarizes research associated with the development of the "Public Opinion Survey of Human Attributes-Stuttering" ("POSHA-S"), a survey instrument designed to provide a worldwide standard measure of public attitudes toward stuttering. Pilot studies with early experimental prototypes of the "POSHA-S" are summarized that relate to…