Statistical Estimators Using Jointly Administrative and Survey Data to Produce French Structural Business Statistics

Directory of Open Access Journals (Sweden)

Brion Philippe

2015-12-01

Full Text Available Using as much administrative data as possible is a general trend among most national statistical institutes. Different kinds of administrative sources, from tax authorities or other administrative bodies, are very helpful material in the production of business statistics. However, these sources often have to be completed by information collected through statistical surveys. This article describes the way Insee has implemented such a strategy in order to produce French structural business statistics. The originality of the French procedure is that administrative and survey variables are used jointly for the same enterprises, unlike the majority of multisource systems, in which the two kinds of sources generally complement each other for different categories of units. The idea is to use, as much as possible, the richness of the administrative sources combined with the timeliness of a survey, even if the latter is conducted only on a sample of enterprises. One main issue is the classification of enterprises within the NACE nomenclature, which is a cornerstone variable in producing the breakdown of the results by industry. At a given date, two values of the corresponding code may coexist: the value of the register, not necessarily up to date, and the value resulting from the data collected via the survey, but only from a sample of enterprises. Using all this information together requires the implementation of specific statistical estimators combining some properties of the difference estimators with calibration techniques. This article presents these estimators, as well as their statistical properties, and compares them with those of other methods.

An integrated system for conducting radiological surveys of contaminated sites - 16312

International Nuclear Information System (INIS)

McCown, Jay P.; Rogers, Donna M.; Waggoner, Charles A.

2009-01-01

This paper describes an integrated detection system that has been developed to conduct radiological surveys of sites suspected of contamination of materials such as depleted uranium. This system utilizes cerium activated lanthanum bromide and thallium activated sodium iodide gamma detectors and can be easily adapted to include units for detecting neutrons. The detection system includes software controlling the collection of radiological spectra and GPS data. Two different platforms are described for conducting surveys, a modified zero turn radius (ZTR) mower and a three-wheeled cart that is manually pushed. The detection system software controlling data collection has components that facilitate completing a grid-less survey on user specified spacings. Another package confirms that all data quality activities (calibrations, etc.) are conducted prior to beginning the survey and also reviews data to identify areas that have been missed for which data quality falls below user designated parameters. Advanced digital signal processing algorithms are used to enhance the interpretation of spectra for conducting background subtractions and for mapping. Data from radiation detection instruments and GPS antennae are merged and made compatible with mapping using Geosoft Oasis montaj software. A summary of system performance during field-testing is included in the paper. This includes survey rate, detection limits, duty cycle, supporting ancillary equipment/material, and manpower requirements. The rate of false positives and false negatives is discussed with the benefits of surveys conducted using synergetic detection systems such as electromagnetic induction imaging. (authors)

Conducting online surveys

NARCIS (Netherlands)

Selm, M. van; Jankowski, N.W.

2006-01-01

The World Wide Web (WWW) is increasingly being used as a tool and platform for survey research. Two types of electronic or online surveys available for data collection are the email and Web based survey, and they constitute the focus of this paper. We address a multitude of issues researchers should

Optimum conductive fabric sensor sites for evaluating the status of knee joint movements using bio-impedance

Directory of Open Access Journals (Sweden)

Kim Jinkwon

2011-06-01

Full Text Available Abstract Background There have been many studies that utilize the bio-impedance measurement method to analyze the movements of the upper and lower limbs. A fixed electrical current flows into the limbs through four standard disposable electrodes in this method. The current flows in the muscles and blood vessels, which have relatively low resistivity levels in the human body. This method is used to measure bio-impedance changes following volume changes of muscles and blood vessels around a knee joint. The result of the bio-impedance changes is used to evaluate the movements. However, the method using the standard disposable electrodes has a restriction related to its low bio-impedance changes: the standard disposable electrodes are only able to measure bio-impedance from a limited part of a muscle. Moreover, it is impossible to use continuously, as the electrodes are designed to be disposable. This paper describes a conductive fabric sensor (CFS using a bio-impedance measurement method and determines the optimum configuration of the sensor for estimating knee joint movements. Methods The upper side of subjects' lower limbs was divided into two areas and the lower side of subjects' lower limbs was divided into three areas. The spots were matched and 6 pairs were selected. Subjects were composed of 15 males (age: 30.7 ± 5.3, weight: 69.8 ± 4.2 kg, and height: 173.5 ± 2.8 cm with no known problems with their knee joints. Bio-impedance changes according to knee joint flexion/extension assessments were calculated and compared with bio-impedance changes by an ankle joint flexion/extension test (SNR I and a hip joint flexion/extension test (SNR II. Results The bio-impedance changes of the knee joint flexion/extension assessment were 35.4 ± 20.0 Ω on the (1, 5 pair. SNR I was 3.8 ± 8.4 and SNR II was 6.6 ± 7.9 on the (1, 5 pair. Conclusions The optimum conductive fabric sensor configuration for evaluating knee joint movements were represented by

Survey to promote an action implemented jointly project; Kyodo jisshi katsudo project suishin chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

In the 1st (1995) conference of the nations which concluded the Framework Convention on Climate Change, decided on was a trial implementation of an action implemented jointly (AIJ) project with developing countries on the voluntary basis. In the Asia region, emission of greenhouse effect gas is remarkably increasing in accordance with rapid development of economy, and it is important to appropriately support through this project both economic development and energy demand in Asia. Taking the circumstance into consideration, the survey was conducted to contribute to activating the AIJ Japan Program. As the AIJ of leading developed countries, recognized were 25 (U.S.), 6 (Holland), 8 (Germany), 2 (Norway) projects. As to the AIJ in Southeast Asia, China and India, Indonesia is actively participating in the project, but others less actively. Concerning the project needs in every country, heightening of power plant efficiency, enhancement of efficiency in the transportation sector, new energy utilization, recovery of methane gas, etc. acquire a priority. 21 figs., 31 tabs.

JET Joint Undertaking

International Nuclear Information System (INIS)

Keen, B.E.

1987-03-01

The paper presents the progress report of the Joint European Torus (JET) Joint Undertaking, 1986. The report contains a survey of the scientific and technical achievements on JET during 1986; the more important articles referred to in this survey are reproduced as appendices to this Report. The last section discusses developments which might improve the overall performance of the machine. (U.K.)

Report on the project on the researcher dispatch type international joint research survey. International joint research for creation of new industries; Kenkyusha hakengata kokusai kyodo kenkyu chosa jigyo. Shinki sangyo soshutsu kokusai kyodo kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of digging up themes of the joint research which develop the R and D in the industrial field in Japan to a new stage, researchers were dispatched to the world representing research institutes to make the research study. As to the survey of the trend of bio-informatics research, visits for survey were paid by 8 researchers to 19 research institutes in the U.S., Australia, France and Germany, and survey was made of the state of new researches such as the genetic network analysis by DNA chip data. Relating to the survey of the trend of the plan for ape genomic DNA sequence, visits for survey were paid by 6 researchers to 12 research institutes in Japan, Germany, France and the U.K. Concerning the research survey with aim of developing the selective reversible expression technology of target genes, researchers were dispatched to St. Jude Children's Research Hospital in the U.S. to conduct the following: construction of basic expression vectors, functional evaluation using cultured cells, making of the transgenic mice to which medicine dependent and cell peculiar expression control genes were introduced, analytical study of the situation of expression control, etc. (NEDO)

Joint malaria surveys lead towards improved cross-border cooperation between Savannakhet province, Laos and Quang Tri province, Vietnam

Directory of Open Access Journals (Sweden)

Pongvongsa Tiengkham

2012-08-01

Full Text Available Abstract Background In Savannakhet province, Laos and Quang Tri province, Vietnam, malaria is still an important health problem and most cases are found in the mountainous, forested border areas where ethnic minority groups live. The objectives of this study were to obtain a better joint understanding of the malaria situation along the border and, on the basis of that, improve malaria control methods through better cooperation between the two countries. Methods Fourteen villages in Savannakhet and 22 villages in Quang Tri were randomly selected within 5 km from the border where a blood survey for microscopic diagnosis (n = 1256 and n = 1803, respectively, household interviews (n = 400, both sides and vector surveys were conducted between August and October 2010. Satellite images were used to examine the forest density around the study villages. Results Malaria prevalence was significantly higher in Laos (5.2% than in Vietnam (1.8% and many other differences were found over the short distance across the border. Bed net coverage was high (> 90% in both Laos and Vietnam but, while in Laos more than 60% of the nets were long-lasting insecticide-treated, Vietnam used indoor residual spraying in this area and the nets were untreated. Anopheles mosquitoes were more abundant in Laos than in Vietnam, especially many Anopheles dirus were captured in indoor light traps while none were collected in Vietnam. The forest cover was higher around the Lao than the Vietnamese villages. After this study routine exchange of malaria surveillance data was institutionalized and for the first time indoor residual spraying was applied in some Lao villages. Conclusions The abundance of indoor-collected An. dirus on the Laos side raises doubts about the effectiveness of a sole reliance on long-lasting insecticide-treated nets in this area. Next to strengthening the early detection, correct diagnosis and prompt, adequate treatment of malaria infections, it is

Joint Source-Channel Decoding of Variable-Length Codes with Soft Information: A Survey

Directory of Open Access Journals (Sweden)

Pierre Siohan

2005-05-01

Full Text Available Multimedia transmission over time-varying wireless channels presents a number of challenges beyond existing capabilities conceived so far for third-generation networks. Efficient quality-of-service (QoS provisioning for multimedia on these channels may in particular require a loosening and a rethinking of the layer separation principle. In that context, joint source-channel decoding (JSCD strategies have gained attention as viable alternatives to separate decoding of source and channel codes. A statistical framework based on hidden Markov models (HMM capturing dependencies between the source and channel coding components sets the foundation for optimal design of techniques of joint decoding of source and channel codes. The problem has been largely addressed in the research community, by considering both fixed-length codes (FLC and variable-length source codes (VLC widely used in compression standards. Joint source-channel decoding of VLC raises specific difficulties due to the fact that the segmentation of the received bitstream into source symbols is random. This paper makes a survey of recent theoretical and practical advances in the area of JSCD with soft information of VLC-encoded sources. It first describes the main paths followed for designing efficient estimators for VLC-encoded sources, the key component of the JSCD iterative structure. It then presents the main issues involved in the application of the turbo principle to JSCD of VLC-encoded sources as well as the main approaches to source-controlled channel decoding. This survey terminates by performance illustrations with real image and video decoding systems.

Joint Source-Channel Decoding of Variable-Length Codes with Soft Information: A Survey

Science.gov (United States)

Guillemot, Christine; Siohan, Pierre

2005-12-01

Multimedia transmission over time-varying wireless channels presents a number of challenges beyond existing capabilities conceived so far for third-generation networks. Efficient quality-of-service (QoS) provisioning for multimedia on these channels may in particular require a loosening and a rethinking of the layer separation principle. In that context, joint source-channel decoding (JSCD) strategies have gained attention as viable alternatives to separate decoding of source and channel codes. A statistical framework based on hidden Markov models (HMM) capturing dependencies between the source and channel coding components sets the foundation for optimal design of techniques of joint decoding of source and channel codes. The problem has been largely addressed in the research community, by considering both fixed-length codes (FLC) and variable-length source codes (VLC) widely used in compression standards. Joint source-channel decoding of VLC raises specific difficulties due to the fact that the segmentation of the received bitstream into source symbols is random. This paper makes a survey of recent theoretical and practical advances in the area of JSCD with soft information of VLC-encoded sources. It first describes the main paths followed for designing efficient estimators for VLC-encoded sources, the key component of the JSCD iterative structure. It then presents the main issues involved in the application of the turbo principle to JSCD of VLC-encoded sources as well as the main approaches to source-controlled channel decoding. This survey terminates by performance illustrations with real image and video decoding systems.

The joint effects of water and sanitation on diarrhoeal disease: a multicountry analysis of the Demographic and Health Surveys.

Science.gov (United States)

Fuller, James A; Westphal, Joslyn A; Kenney, Brooke; Eisenberg, Joseph N S

2015-03-01

To assess whether the joint effects of water and sanitation infrastructure, are acting antagonistically (redundant services preventing the same cases of diarrhoeal disease), independently, or synergistically; and to assess how these effects vary by country and over time. We used data from 217 Demographic and Health Surveys conducted in 74 countries between 1986 and 2013. We used modified Poisson regression to assess the impact of water and sanitation infrastructure on the prevalence of diarrhoea among children under 5. The impact of water and sanitation varied across surveys, and adjusting for socio-economic status drove these estimates towards the null. Sanitation had a greater effect than water infrastructure when all 217 surveys were pooled; however, the impact of sanitation diminished over time. Based on survey data from the past 10 years, we saw no evidence for benefits in improving drinking water or sanitation alone, but we estimated a 6% reduction of both combined (prevalence ratio = 0.94, 95% confidence limit 0.91-0.98). Water and sanitation interventions should be combined to maximise the number of cases of diarrhoeal disease prevented in children under 5. Further research should identify the sources of variability seen between countries and across time. These national surveys likely include substantial measurement error in the categorisation of water and sanitation, making it difficult to interpret the roles of other pathways. © 2014 John Wiley & Sons Ltd.

An algorithm to assess methodological quality of nutrition and mortality cross-sectional surveys: development and application to surveys conducted in Darfur, Sudan.

Science.gov (United States)

Prudhon, Claudine; de Radiguès, Xavier; Dale, Nancy; Checchi, Francesco

2011-11-09

Nutrition and mortality surveys are the main tools whereby evidence on the health status of populations affected by disasters and armed conflict is quantified and monitored over time. Several reviews have consistently revealed a lack of rigor in many surveys. We describe an algorithm for analyzing nutritional and mortality survey reports to identify a comprehensive range of errors that may result in sampling, response, or measurement biases and score quality. We apply the algorithm to surveys conducted in Darfur, Sudan. We developed an algorithm based on internationally agreed upon methods and best practices. Penalties are attributed for a list of errors, and an overall score is built from the summation of penalties accrued by the survey as a whole. To test the algorithm reproducibility, it was independently applied by three raters on 30 randomly selected survey reports. The algorithm was further applied to more than 100 surveys conducted in Darfur, Sudan. The Intra Class Correlation coefficient was 0.79 for mortality surveys and 0.78 for nutrition surveys. The overall median quality score and range of about 100 surveys conducted in Darfur were 0.60 (0.12-0.93) and 0.675 (0.23-0.86) for mortality and nutrition surveys, respectively. They varied between the organizations conducting the surveys, with no major trend over time. Our study suggests that it is possible to systematically assess quality of surveys and reveals considerable problems with the quality of nutritional and particularly mortality surveys conducted in the Darfur crisis.

A Primer for Conducting Survey Research Using MTurk: Tips for the Field

Science.gov (United States)

Chambers, Silvana; Nimon, Kim; Anthony-McMann, Paula

2016-01-01

This paper presents best practices for conducting survey research using Amazon Mechanical Turk (MTurk). Readers will learn the benefits, limitations, and trade-offs of using MTurk as compared to other recruitment services, including SurveyMonkey and Qualtrics. A synthesis of survey design guidelines along with a sample survey are presented to help…

An algorithm to assess methodological quality of nutrition and mortality cross-sectional surveys: development and application to surveys conducted in Darfur, Sudan

Directory of Open Access Journals (Sweden)

Prudhon Claudine

2011-11-01

Full Text Available Abstract Background Nutrition and mortality surveys are the main tools whereby evidence on the health status of populations affected by disasters and armed conflict is quantified and monitored over time. Several reviews have consistently revealed a lack of rigor in many surveys. We describe an algorithm for analyzing nutritional and mortality survey reports to identify a comprehensive range of errors that may result in sampling, response, or measurement biases and score quality. We apply the algorithm to surveys conducted in Darfur, Sudan. Methods We developed an algorithm based on internationally agreed upon methods and best practices. Penalties are attributed for a list of errors, and an overall score is built from the summation of penalties accrued by the survey as a whole. To test the algorithm reproducibility, it was independently applied by three raters on 30 randomly selected survey reports. The algorithm was further applied to more than 100 surveys conducted in Darfur, Sudan. Results The Intra Class Correlation coefficient was 0.79 for mortality surveys and 0.78 for nutrition surveys. The overall median quality score and range of about 100 surveys conducted in Darfur were 0.60 (0.12-0.93 and 0.675 (0.23-0.86 for mortality and nutrition surveys, respectively. They varied between the organizations conducting the surveys, with no major trend over time. Conclusion Our study suggests that it is possible to systematically assess quality of surveys and reveals considerable problems with the quality of nutritional and particularly mortality surveys conducted in the Darfur crisis.

Joint analysis of galaxy-galaxy lensing and galaxy clustering: Methodology and forecasts for Dark Energy Survey

International Nuclear Information System (INIS)

Park, Y.; Krause, E.; Dodelson, S.; Jain, B.; Amara, A.

2016-01-01

Here, the joint analysis of galaxy-galaxy lensing and galaxy clustering is a promising method for inferring the growth function of large-scale structure. Anticipating a near future application of this analysis to Dark Energy Survey (DES) measurements of galaxy positions and shapes, we develop a practical approach to modeling the assumptions and systematic effects affecting the joint analysis of small-scale galaxy-galaxy lensing and large-scale galaxy clustering. Introducing parameters that characterize the halo occupation distribution (HOD), photometric redshift uncertainties, and shear measurement errors, we study how external priors on different subsets of these parameters affect our growth constraints. Degeneracies within the HOD model, as well as between the HOD and the growth function, are identified as the dominant source of complication, with other systematic effects being subdominant. The impact of HOD parameters and their degeneracies necessitate the detailed joint modeling of the galaxy sample that we employ. We conclude that DES data will provide powerful constraints on the evolution of structure growth in the Universe, conservatively/optimistically constraining the growth function to 7.9%/4.8% with its first-year data that cover over 1000 square degrees, and to 3.9%/2.3% with its full five-year data that will survey 5000 square degrees, including both statistical and systematic uncertainties.

Hip joint mobility in dancers: preliminary report.

Science.gov (United States)

Drężewska, Marlena; Gałuszka, Renata; Sliwiński, Zbigniew

2012-01-01

The aim of this study was to evaluate the impact of dancing on hip joint mobility and to assess the relationship between active movements of the hips and injuries among dancers, which may be important in planning rehabilitation in this group. The sample comprised 49 dancers (37 women and 12 men) aged 15 to 32 years. The participants were the professional dancers of the Kielce Dance Theatre and members of two youth jazz dance teams from the Kielce Dance Theatre. The active range of motion of the hips was measured in three planes using a goniometer in order to assess the influence of dance training on hip joint mobility. A questionnaire-based survey was also conducted. The range of flexion, extension and external rotation was significantly greater in the group of long-time dancers (p <0.05). There was a significantly greater range of flexion, abduction and external rotation in previously injured hip joints (p<0.05). 1. Injuries to hip joints in dancers may result in increased ranges of motion, which may lead to disturbances of joint stability. 2. Being a long-time dancer and the female gender were associated with an increased range of hip joint motion.

Joint Degree Program: the Perspective of Employers

Directory of Open Access Journals (Sweden)

Tatjana Bilevičienė

2013-08-01

Full Text Available Purpose — the purpose of this article is to extend discussion towards the need and importance of joint degree programs in modern universities, introducing the perspective of the employers toward this question. Design/methodology/approach — the research was conducted to analyze the demand of joint degree programs from the perspective of employers, identify weak and strong aspects, opinion and demand for graduates of such programs. To achieve this purpose, a combination of theoretical and empirical methods was chosen: document analysis (previous studies, statistics was conducted and an online qualitative survey was organized. Findings — The analysis of articles, studies and statistics points out the challenges and threats faced by universities nowadays, forcing higher education institutions to find new ways to raise the quality of studies and raise the interest of employers to choose graduates from MRU, as well as the satisfaction of employers with their choice of employees. Theoretical analysis pointed out these challenges and requirements for the modern employee, summarised the challenges in preparation of IT field specialists. The conducted research results showed that the diploma of joint degree programs would not be treated as an advantage of possible employee from the perspective of employers in case some important aspects will not be taken into consideration by program creators. On the other hand, undeniably there are strong sides, such as knowledge in the fields of foreign language, international experience, innovativeness and creativeness of employees that would be treated as an advantage in the process of selection for positions of any technical support related positions. Research limitations/implications — employers, whose business activities are closely related to information technology, have been invited as experts. In addition, these experts have a good understanding of the specifics of joint degree programs. The received

History of food consumption surveys conducted by the U.S. Department of Agriculture

Science.gov (United States)

Chapter 6 entitled "History of Food Consumption Surveys Conducted by The U.S. Department of Agriculture” provides an overview of the surveys conducted by USDA to monitor food use and food consumption patterns in the U.S. population since the latter part of the 19th century to 2014. This chapter in ...

Statistical study of static gasket conductance; Etude statistique de la conductance d'un joint d'etancheite statique

Energy Technology Data Exchange (ETDEWEB)

Flukiger, F

2005-10-15

This work is motivated by tightness technological problems associated with metallic gasket. The objective is a better understanding of leakage mechanisms, through the development of new computational tools. In this study, the aperture field between two rough surfaces in contact is described by a short correlated isotropic random Gaussian process. The system is studied as a set of independent elementary surfaces. Joint conductances are evaluated from a statistical study on those elementary surfaces. A computational code is developed using a network approach based on lubrication theory estimation of local conductances. The global conductance computation becomes analogous to an electrical problem for which the resistances are distributed on a random network. The network is built from the identification of the aperture field critical points. Maxima are linked through saddle points. Bond conductances are estimated at the aperture field saddle points. First, a purely plastic model of deformations is considered. Near percolation threshold the conductances display a power behaviour. Far from percolation threshold, numerical results are favourably compared with an effective medium approximation. Secondly, we study the impact of elastic deformations. A computational code based on Boussinesq approximation is coupled to the network approach. The results indicate a significant impact of elastic deformations on conductances. Finally, the network approach is adapted to simulate quasi-static drainage thanks to a classical invasion percolation algorithm. A good comparison between previous experiments and numerical predictions is obtained. (author)

Joint resistance measurements of pancake and terminal joints for JT-60SA EF coils

Energy Technology Data Exchange (ETDEWEB)

Obana, Tetsuhiro, E-mail: obana.tetsuhiro@LHD.nifs.ac.jp [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Takahata, Kazuya; Hamaguchi, Shinji; Mito, Toshiyuki; Imagawa, Shinsaku [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Kizu, Kaname; Murakami, Haruyuki; Yoshida, Kiyoshi [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

2013-11-15

Highlights: • To evaluate the joint fabrication technology for the JT-60SA EF coils, joint resistance measurements were conducted with a joint sample. • The joint sample was composed of pancake and terminal joints. • The measurements demonstrated that both joints fulfilled the design requirement. • Considering the measurements, the characteristics of both joints were investigated using an analytical model that represents the joints. -- Abstract: To evaluate the joint fabrication technology for the JT-60SA EF coils, joint resistance measurements were conducted using a sample consisting of pancake and terminal joints. Both joints are shake-hands lap joints composed of cable-in-conduit conductors and a pure copper saddle-shaped spacer. The measurements demonstrated that both joints fulfilled the design requirement. Considering these measurements, the characteristics of both joints were investigated using analytical models that represent the joints. The analyses indicated that the characteristics of the conductors used in the joints affect the characteristics of the joints.

A survey of formal methods for determining functional joint axes.

Science.gov (United States)

Ehrig, Rainald M; Taylor, William R; Duda, Georg N; Heller, Markus O

2007-01-01

Axes of rotation e.g. at the knee, are often generated from clinical gait analysis data to be used in the assessment of kinematic abnormalities, the diagnosis of disease, or the ongoing monitoring of a patient's condition. They are additionally used in musculoskeletal models to aid in the description of joint and segment kinematics for patient specific analyses. Currently available methods to describe joint axes from segment marker positions share the problem that when one segment is transformed into the coordinate system of another, artefacts associated with motion of the markers relative to the bone can become magnified. In an attempt to address this problem, a symmetrical axis of rotation approach (SARA) is presented here to determine a unique axis of rotation that can consider the movement of two dynamic body segments simultaneously, and then compared its performance in a survey against a number of previously proposed techniques. Using a generated virtual joint, with superimposed marker error conditions to represent skin movement artefacts, fitting methods (geometric axis fit, cylinder axis fit, algebraic axis fit) and transformation techniques (axis transformation technique, mean helical axis, Schwartz approach) were classified and compared with the SARA. Nearly all approaches were able to estimate the axis of rotation to within an RMS error of 0.1cm at large ranges of motion (90 degrees ). Although the geometric axis fit produced the least RMS error of approximately 1.2 cm at lower ranges of motion (5 degrees ) with a stationary axis, the SARA and Axis Transformation Technique outperformed all other approaches under the most demanding marker artefact conditions for all ranges of motion. The cylinder and algebraic axis fit approaches were unable to compute competitive AoR estimates. Whilst these initial results using the SARA are promising and are fast enough to be determined "on-line", the technique must now be proven in a clinical environment.

Deployment of Intelligent Transportation Systems: A Summary of the 2016 National Survey Results

Science.gov (United States)

2018-03-01

This report presents summary results of the 2016 ITS Deployment Tracking survey, the most recent survey conducted through the ITS Deployment Tracking Project. The U.S. Department of Transportation and the ITS Joint Program Office have pursued a resea...

City College of San Francisco 1997 Sexual Harassment Student Opinion Survey.

Science.gov (United States)

City Coll. of San Francisco, CA. Office of Institutional Research, Planning and Grants.

This document describes the findings of a 1997 sexual harassment student opinion survey conducted at City College of San Francisco. Survey questions were jointly developed by the Sexual Harassment Prevention Sub-Committee of the Diversity Advisory Committee and the Office of Research and Planning, approved by the College Advisory Council, and…

Learning lessons from field surveys in humanitarian contexts: a case study of field surveys conducted in North Kivu, DRC 2006-2008

Directory of Open Access Journals (Sweden)

Grellety Emmanuel

2009-09-01

Full Text Available Abstract Survey estimates of mortality and malnutrition are commonly used to guide humanitarian decision-making. Currently, different methods of conducting field surveys are the subject of debate among epidemiologists. Beyond the technical arguments, decision makers may find it difficult to conceptualize what the estimates actually mean. For instance, what makes this particular situation an emergency? And how should the operational response be adapted accordingly. This brings into question not only the quality of the survey methodology, but also the difficulties epidemiologists face in interpreting results and selecting the most important information to guide operations. As a case study, we reviewed mortality and nutritional surveys conducted in North Kivu, Democratic Republic of Congo (DRC published from January 2006 to January 2009. We performed a PubMed/Medline search for published articles and scanned publicly available humanitarian databases and clearinghouses for grey literature. To evaluate the surveys, we developed minimum reporting criteria based on available guidelines and selected peer-review articles. We identified 38 reports through our search strategy; three surveys met our inclusion criteria. The surveys varied in methodological quality. Reporting against minimum criteria was generally good, but presentation of ethical procedures, raw data and survey limitations were missed in all surveys. All surveys also failed to consider contextual factors important for data interpretation. From this review, we conclude that mechanisms to ensure sound survey design and conduct must be implemented by operational organisations to improve data quality and reporting. Training in data interpretation would also be useful. Novel survey methods should be trialled and prospective data gathering (surveillance employed wherever feasible.

Conduction Mechanism of Valence Change Resistive Switching Memory: A Survey

Directory of Open Access Journals (Sweden)

Ee Wah Lim

2015-09-01

Full Text Available Resistive switching effect in transition metal oxide (TMO based material is often associated with the valence change mechanism (VCM. Typical modeling of valence change resistive switching memory consists of three closely related phenomena, i.e., conductive filament (CF geometry evolution, conduction mechanism and temperature dynamic evolution. It is widely agreed that the electrochemical reduction-oxidation (redox process and oxygen vacancies migration plays an essential role in the CF forming and rupture process. However, the conduction mechanism of resistive switching memory varies considerably depending on the material used in the dielectric layer and selection of electrodes. Among the popular observations are the Poole-Frenkel emission, Schottky emission, space-charge-limited conduction (SCLC, trap-assisted tunneling (TAT and hopping conduction. In this article, we will conduct a survey on several published valence change resistive switching memories with a particular interest in the I-V characteristic and the corresponding conduction mechanism.

Aeromagnetic survey in Eurajoensalmi, Olkiluoto 2008

International Nuclear Information System (INIS)

Levaeniemi, H.

2008-08-01

This report describes the survey operation, survey and processing methods and the deliverables of an aerogeophysical survey in Olkiluoto area in April 2008. The survey was conducted by Geological Survey of Finland (GTK). The survey aircraft was a twin-engine Twin Otter operated by Finnish Aviation Academy (SIO) and owned by Natural Environment Research Council / British Geological Survey (NERC / BGS), with whom GTK has established a joint venture called Joint Airborne-geoscience Capability (JAC). The survey was conducted in April 2008 during six days. The survey consists of six separate survey flights, one of which was a magnetic calibration flight. The survey was based in Pori airport. Survey line spacing was 50 meters and nominal survey altitude was 30 meters. Measurements were completed in April 2008, and data processing and reporting was done in June 2008. Two cesium magnetometers installed onboard the aircraft (at the left wingtip and in a nose cone) were measuring the magnetic total field intensity during the survey flights. An automatic compensation unit corrected the aircraft attitude errors in the magnetic data in real time. In addition to magnetic measurement, auxiliary parameters such as flight altitude and aircraft attitude were also recorded simultaneously. Reference ground base station was used for recording the temporal variations in the magnetic field and also reference data for post-positioning of coordinate information. In the post-processing phase, heading correction, base station correction and microlevelling procedures were applied to the magnetic data. The data was exported to numeric XYZ files and interpolated into grid data file. A noteworthy local detail present in the survey and in the processing was the massive power line. For safety reasons, flight altitude had to be increased and survey lines had to be cut short in the vicinity of the powerline. However, due to reasonable planning of the survey area boundaries, this caused no great

Extracting Archaeological Feautres from GPR Surveys Conducted with Variable Soil Moisture Conditions

Science.gov (United States)

Morris, I. M.; Glisic, B.; Gonciar, A.

2017-12-01

As a common tool for subsurface archaeological prospection, ground penetrating radar (GPR) is a useful method for increasing the efficiency of archaeological excavations. Archaeological sites are often temporally and financially constrained, therefore having limited ability to reschedule surveys compromised by weather. Furthermore, electromagnetic GPR surveys are especially sensitive to variations in water content, soil type, and site-specific interference. In this work, GPR scans of a partially excavated Roman villa consisting of different construction materials and phases (limestone, andesite, brick) in central Romania are compared. Surveys were conducted with a 500 MHz GPR antenna in both dry (pre-rain event) and wet (post-rain event) conditions. Especially in time or depth slices, wet surveys present additional archaeological features that are not present or clear in the standard dry conditions, while simultaneously masking the clutter present in those scans. When dry, the limestone has a similar dielectric constant to the soil and does not provide enough contrast in electromagnetic properties for strong reflections despite the significant difference in their physical properties. Following precipitation, however, the electromagnetic properties of these two materials is dominated by their respective water content and the contrast is enhanced. For this reason, the wet surveys are particularly necessary for revealing reflections from the limestone features often invisible in dry surveys. GPR surveys conducted in variable environmental conditions provide unique archaeological information, with potential near-surface geophysical applications in nondestructive material characterization and identification.

5 CFR 591.223 - When does OPM conduct COLA surveys?

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false When does OPM conduct COLA surveys? 591.223 Section 591.223 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS ALLOWANCES AND DIFFERENTIALS Cost-of-Living Allowance and Post Differential-Nonforeign Areas Cost-Of-Living...

FY 1997 basic survey for coal resource development. Data collection of the joint research of new technology in the geophysical exploration of coal resources (water area medium depth seam survey); 1997 nendo sekitan shigen kaihatsu kiso chosa shiryoshu. Shintansa gijutsu chosa kaihatsu (suiiki chushindoso tansa)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

In 'the new exploration technology test on coal resource' (water area medium depth seam exploration) jointly conducted between Japan and China, tests have been carried out for 5 years on the BDR-5 test boring measurement monitoring system and the diamond bit which are items of the technology development of high resolution seismic survey system and high efficiency test boring system. As a result, the new technology test was successful, and technical economic effects were obtained. The situation of the test was summarized. The following data were compiled as shown in Data No.1-12. 1. The proceedings of the FY 1997 Japan-China steering committee (No.9). 2. Report on the survey of China verification field South Sihu water level situation. 3. The proceedings of the FY 1997 Japan-China steering committee (final). 4. Report on the FY 1997 reflection seismic exploration survey. 5. Report on the FY 1997 No.2 test boring survey. 6. Summarization of the test on 'the new exploration technology of coal source' conducted between Japan and China. 7. Report on the drilling data measurement. 8. Various sections of the reflection seismic survey data processing. 9. Traverse line chart. 10. T3 isochrone chart. 11. T3 depth structural chart. 12. Report on the new exploration technology survey development (water area medium depth seam exploration) geological model making. (NEDO)

Conducting a respondent-driven sampling survey with the use of existing resources in Sydney, Australia.

Science.gov (United States)

Paquette, Dana M; Bryant, Joanne; Crawford, Sione; de Wit, John B F

2011-07-01

Respondent-driven sampling (RDS) is a form of chain-referral sampling that is increasingly being used for HIV behavioural surveillance. When used for surveillance purposes, a sampling method should be relatively inexpensive and simple to operate. This study examined whether an RDS survey of people who inject drugs (PWID) in Sydney, Australia, could be successfully conducted through the use of minimal and existing resources. The RDS survey was conducted on the premises of a local needle and syringe program (NSP) with some adjustments to take into account the constraints of existing resources. The impact of the survey on clients and on staff was examined by summarizing NSP service data and by conducting post-survey discussions with NSP staff. From November 2009 till March 2010, 261 participants were recruited in 16 waves. A significant increase was found in the number of services provided by the NSP during and after data collection. Generally, staff felt that the survey had a positive impact by exposing a broader group of people to the NSP. However, conducting the survey may have led to privacy issues for NSP clients due to an increased number of people gathering around the NSP. This study shows that RDS can be conducted with the use of minimal and existing resources under certain conditions (e.g., use of a self-administered questionnaire and no biological samples taken). A more detailed cost-utility analysis is needed to determine whether RDS' advantages outweigh potential challenges when compared to simpler and less costly convenience methods. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Report on surveys and researches to excavate international joint researches related to industrial technologies; Sangyo gijutsu ni kansuru kokusai kyodo kenkyu hakkutsu no tame no chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Five themes were taken up for a project of the 'surveys and researches to excavate international joint researches related to industrial technologies'. Investigation groups were organized and dispatched for each theme toperform domestic and overseas surveys. Discussions were given on eachtheme for the possibilities of structuring international joint researches. The five themes are as follows: 'wearable information network related technologies', wherein technologies to micronize information devices have been advanced rapidly, and the technologies are entering the age from personalizing and mobilizing the information into the wearable computing; this theme is intended to develop systems to unify these technologies by means of international joint researches: 'surveys on using unutilized animal oils and fats as chemical raw materials', which are intended to make clear possibilities and problems in utilizing animal oils and fats as raw materials for the chemical industry that can substitute fossil resources: 'international joint researches on new glasses' and 'processes to manufacture semiconductors using glassy carbon' to develop glassy carbon having excellent chemical resistance substituting quartz: and 'international joint researches on the Russian project which places environment and energy in its center'. (NEDO)

Maternal warmth and directiveness jointly moderate the etiology of childhood conduct problems.

Science.gov (United States)

Alexandra Burt, S; Klahr, Ashlea M; Neale, Michael C; Klump, Kelly L

2013-10-01

Prior studies exploring gene-environment interactions (GxE) in the development of youth conduct problems (CP) have focused almost exclusively on single-risk experiences, despite research indicating that the presence of other risk factors and or the absence of protective factors can accentuate the influence of a given risk factor on CP. The goal of the current study was to fill this gap in the literature, evaluating whether risky and protective aspects of parenting might combine to jointly moderate the etiology of CP. The sample consisted of 500 child twin pairs from the Michigan State University Twin Registry (MSUTR). Child CP was assessed using multiple informant reports. Maternal warmth and directiveness were assessed via videotaped dyadic interactions between mothers and each of their twins. Biometric GxE analyses revealed that directiveness and warmth did appear to jointly moderate the etiology of CP. In particular, shared environmental influences were accentuated by colder, less directive or 'less engaged' mothering, whereas genetic influences were strongest when the child was experiencing warmer, more directive or 'more authoritative' mothering. Such findings serve to highlight the synergistic effects of risky and protective experiences on child outcomes. They also provide additional empirical support for the bioecological form of GxE, which postulates that, in some cases, genetic influences may be most strongly expressed in the presence of low-risk environments. © 2013 The Authors. Journal of Child Psychology and Psychiatry © 2013 Association for Child and Adolescent Mental Health.

Application of Delphi expert panel in joint venture projects

Science.gov (United States)

Adnan, H.; Rosman, M. R.; Rashid, Z. Z. Ahmad; Mohamad Yusuwan, N.; Bakhary, N. A.

2018-02-01

This study was conducted with the aim to identify the application of the Delphi Technique in validating findings obtained from questionnaire surveys and interviews done in- depth on the subject of joint venture projects in Malaysia. The Delphi technique aims to achieve a consensus of opinion amongst expert panellist that were selected on the primary factors in JV projects. To achieve research objectives, a progressive series of questions was designed where a selected panel of expert to confirm and validate the final findings. The rationale, benefits, limitations and recommendations for the use of Delphi were given in this study. From the literature review done, twenty-one factors were identified as critical factors to the making any joint venture project successful. Detail information from contractors were obtained by using the questionnaire survey method and forty-three in-depth interviews were carried out. Trust between partners, mutual understanding, partner selection criteria, agreement of contract, objective compatibility, conflict, and commitment were confirmed by the Delphi panel to be the critical success factors besides another fourteen factors which were found to be the Failure Reduction Criteria. Delphi techniques has proven to successfully assist in recognising the main factors and would be beneficial in supplementing the success of joint venture arrangements application for construction projects in Malaysia.

Mechanism of Solder Joint Cracks in Anisotropic Conductive Films Bonding and Solutions: Delaying Hot-Bar Lift-Up Time and Adding Silica Fillers

Directory of Open Access Journals (Sweden)

Shuye Zhang

2018-01-01

Full Text Available Micron sizes solder metallurgical joints have been applied in a thin film application of anisotropic conductive film and benefited three general advantages, such as lower joint resistance, higher power handling capability, and reliability, when compared with pressure based contact of metal conductor balls. Recently, flex-on-board interconnection has become more and more popular for mobile electronic applications. However, crack formation of the solder joint crack was occurred at low temperature curable acrylic polymer resins after bonding processes. In this study, the mechanism of SnBi58 solder joint crack at low temperature curable acrylic adhesive was investigated. In addition, SnBi58 solder joint cracks can be significantly removed by increasing the storage modulus of adhesives instead of coefficient of thermal expansion. The first approach of reducing the amount of polymer rebound can be achieved by using an ultrasonic bonding method to maintain a bonding pressure on the SnBi58 solder joints cooling to room temperature. The second approach is to increase storage modulus of adhesives by adding silica filler into acrylic polymer resins to prevent the solder joint from cracking. Finally, excellent acrylic based SnBi58 solder joints reliability were obtained after 1000 cycles thermal cycling test.

Reviving common standards in point-count surveys for broad inference across studies

Science.gov (United States)

Steven M. Matsuoka; C. Lisa Mahon; Colleen M. Handel; Péter Sólymos; Erin M. Bayne; Patricia C. Fontaine; C. John Ralph

2014-01-01

We revisit the common standards recommended by Ralph et al. (1993, 1995a) for conducting point-count surveys to assess the relative abundance of landbirds breeding in North America. The standards originated from discussions among ornithologists in 1991 and were developed so that point-count survey data could be broadly compared and jointly analyzed by national data...

Quantifying the impact of transient joint symptoms, chronic joint symptoms, and arthritis: a population-based approach.

Science.gov (United States)

Busija, Lucy; Buchbinder, Rachelle; Osborne, Richard H

2009-10-15

To estimate the prevalence and co-occurrence of self-reported doctor-diagnosed arthritis, chronic joint symptoms (pain, aching, stiffness, or swelling on most days for a month), and transient joint symptoms (pain, aching, stiffness, or swelling but not on most days for a month), and to compare the sociodemographic characteristics, activity limitations, and health-related quality of life (HRQOL) of people with joint conditions with those who have no self-reported doctor-diagnosed arthritis and no joint symptoms. Data from the 2004 population-based South Australian Health Omnibus Survey (n = 2,840, ages 18-96 years) were used in the study. Activity limitations were assessed using 10 activity limitations questions from the Short Form 36 health survey. HRQOL was assessed using the Assessment of Quality of Life scale. Half of all respondents reported having joint problems, with 26%, 11%, and 13% reporting self-reported doctor-diagnosed arthritis, chronic joint symptoms, and transient joint symptoms, respectively. Chronic joint conditions (self-reported doctor-diagnosed arthritis and chronic joint symptoms) accounted for 74% of all joint problems and were associated with higher odds of activity limitations and poorer HRQOL. The frequency of transient and chronic joint symptoms was highest among middle-aged participants (ages 45-54 years for transient and 45-64 years for chronic joint symptoms) and those who had a body mass index in the obese range. Prevalence of self-reported doctor-diagnosed arthritis increased with age and was higher among women and those who were overweight or obese. This study documented the high prevalence and impact of joint conditions in the community. Chronic joint conditions affect daily life and are substantial barriers for effective public health interventions aimed at reducing obesity and inactivity.

Aerogeophysical survey in Olkiluoto 2009

International Nuclear Information System (INIS)

Kurimo, M.

2009-08-01

This report describes the survey operation, survey and processing methods and the deliverables of an aerogeophysical survey in Olkiluoto area in May 2009. The survey was conducted by Geological Survey of Finland (GTK). The survey aircraft was a twin-engine Twin Otter operated by Finnish Aviation Academy (SIO) and owned by Natural Environment Research Council / British Geological Survey (NERC / BGS), with whom GTK has established a joint venture called Joint Airborne-geoscience Capability (JAC). The survey was conducted in May 2009 between May 5th and May 18th. The survey consists of ten separate survey flights and two magnetic calibration flights. The survey was based in Pori airport. Survey line spacing was 50 meters and nominal survey altitude was 30 meters. Measurements were completed in May 2009, and data processing and reporting was done in June 2009. Two cesium magnetometers installed onboard the aircraft (at the left wingtip and in a nose cone) were measuring the magnetic total field intensity during the survey flights. An automatic compensation unit corrected the aircraft attitude errors in the magnetic data in real time. The four-frequency electromagnetic (EM) unit included four transmitter coils with amplifiers in right wingtip and four receiver coils in left wingtip. Frequencies were 900 Hz, 3 kHz, 14 kHz and 24.5 kHz. The gamma spectrometer with two crystal packages (total volume 42 litres) measured the 256 channel energy spectra. In addition, auxiliary parameters such as flight altitude and aircraft attitude were also recorded simultaneously. Reference ground base station was used for recording the temporal variations in the magnetic field and also reference data for post-positioning of coordinate information. In the post-processing phase, heading correction, base station correction and microlevelling procedures were applied to the magnetic data. The EM data and radiometric data were corrected with calibration coefficients and levelled. The data was

Specific storage and hydraulic conductivity tomography through the joint inversion of hydraulic heads and self-potential data

Science.gov (United States)

Ahmed, A. Soueid; Jardani, A.; Revil, A.; Dupont, J. P.

2016-03-01

Transient hydraulic tomography is used to image the heterogeneous hydraulic conductivity and specific storage fields of shallow aquifers using time series of hydraulic head data. Such ill-posed and non-unique inverse problem can be regularized using some spatial geostatistical characteristic of the two fields. In addition to hydraulic heads changes, the flow of water, during pumping tests, generates an electrical field of electrokinetic nature. These electrical field fluctuations can be passively recorded at the ground surface using a network of non-polarizing electrodes connected to a high impedance (> 10 MOhm) and sensitive (0.1 mV) voltmeter, a method known in geophysics as the self-potential method. We perform a joint inversion of the self-potential and hydraulic head data to image the hydraulic conductivity and specific storage fields. We work on a 3D synthetic confined aquifer and we use the adjoint state method to compute the sensitivities of the hydraulic parameters to the hydraulic head and self-potential data in both steady-state and transient conditions. The inverse problem is solved using the geostatistical quasi-linear algorithm framework of Kitanidis. When the number of piezometers is small, the record of the transient self-potential signals provides useful information to characterize the hydraulic conductivity and specific storage fields. These results show that the self-potential method reveals the heterogeneities of some areas of the aquifer, which could not been captured by the tomography based on the hydraulic heads alone. In our analysis, the improvement on the hydraulic conductivity and specific storage estimations were based on perfect knowledge of electrical resistivity field. This implies that electrical resistivity will need to be jointly inverted with the hydraulic parameters in future studies and the impact of its uncertainty assessed with respect to the final tomograms of the hydraulic parameters.

Survey and analysis of selected jointly owned large-scale electric utility storage projects

Energy Technology Data Exchange (ETDEWEB)

1982-05-01

The objective of this study was to examine and document the issues surrounding the curtailment in commercialization of large-scale electric storage projects. It was sensed that if these issues could be uncovered, then efforts might be directed toward clearing away these barriers and allowing these technologies to penetrate the market to their maximum potential. Joint-ownership of these projects was seen as a possible solution to overcoming the major barriers, particularly economic barriers, of commercializaton. Therefore, discussions with partners involved in four pumped storage projects took place to identify the difficulties and advantages of joint-ownership agreements. The four plants surveyed included Yards Creek (Public Service Electric and Gas and Jersey Central Power and Light); Seneca (Pennsylvania Electric and Cleveland Electric Illuminating Company); Ludington (Consumers Power and Detroit Edison, and Bath County (Virginia Electric Power Company and Allegheny Power System, Inc.). Also investigated were several pumped storage projects which were never completed. These included Blue Ridge (American Electric Power); Cornwall (Consolidated Edison); Davis (Allegheny Power System, Inc.) and Kttatiny Mountain (General Public Utilities). Institutional, regulatory, technical, environmental, economic, and special issues at each project were investgated, and the conclusions relative to each issue are presented. The major barriers preventing the growth of energy storage are the high cost of these systems in times of extremely high cost of capital, diminishing load growth and regulatory influences which will not allow the building of large-scale storage systems due to environmental objections or other reasons. However, the future for energy storage looks viable despite difficult economic times for the utility industry. Joint-ownership can ease some of the economic hardships for utilites which demonstrate a need for energy storage.

PRN 2011-1: Residential Exposure Joint Venture

Science.gov (United States)

This PR Notice is to advise registrants of an industry-wide joint venture, titled the Residential Exposure Joint Venture (REJV), which has developed a national survey regarding residential consumer use/usage data for pesticides.

Comparing Lay Community and Academic Survey Center Interviewers in Conducting Household Interviews in Latino Communities.

Science.gov (United States)

Chan-Golston, Alec M; Friedlander, Scott; Glik, Deborah C; Prelip, Michael L; Belin, Thomas R; Brookmeyer, Ron; Santos, Robert; Chen, Jie; Ortega, Alexander N

2016-01-01

The employment of professional interviewers from academic survey centers to conduct surveys has been standard practice. Because one goal of community-engaged research is to provide professional skills to community residents, this paper considers whether employing locally trained lay interviewers from within the community may be as effective as employing interviewers from an academic survey center with regard to unit and item nonresponse rates and cost. To study a nutrition-focused intervention, 1035 in-person household interviews were conducted in East Los Angeles and Boyle Heights, 503 of which were completed by lay community interviewers. A chi-square test was used to assess differences in unit nonresponse rates between professional and community interviewers and Welch's t tests were used to assess differences in item nonresponse rates. A cost comparison analysis between the two interviewer groups was also conducted. Interviewers from the academic survey center had lower unit nonresponse rates than the lay community interviewers (16.2% vs. 23.3%; p < 0.01). However, the item nonresponse rates were lower for the community interviewers than the professional interviewers (1.4% vs. 3.3%; p < 0.01). Community interviewers cost approximately $415.38 per survey whereas professional interviewers cost approximately $537.29 per survey. With a lower cost per completed survey and lower item nonresponse rates, lay community interviewers are a viable alternative to professional interviewers for fieldwork in community-based research. Additional research is needed to assess other important aspects of data quality interviewer such as interviewer effects and response error.

The severity of temporomandibular joint disorder by teeth loss in the elderly

Directory of Open Access Journals (Sweden)

Indry Herdiyani

2011-07-01

Full Text Available Temporomandibular joint dysfunction is a term that covers a number of clinical problems that involves masticatory muscles, temporomandibular joints, and related structures, or both. Loss of tooth was an etiology of temporomandibular joint dysfunction. The purpose of this study was to obtain the description of temporomandibular joint dysfunction level that caused by tooth loss of elderly in three nursing home Bandung. This was a descriptive study using the survey method of the elderly in three nursing home Bandung. A total of 34 people consist 6 males and 28 females. The subjects were examined by symptoms of temporomandibular joint dysfunction and the dysfunction level was assessed by Helkimo Clinical Dysfunction Index. The result of this study shows that elderly in Nursing Home Bandung have mild dysfunction level was 7 (14.71%, moderate dysfunction level was 22 (64.71%, and severe dysfunction level is 5 (20.58%. It can be concluded that loss of the teeth is one of the etiologies of temporomandibular joint disorder. Based on the research conducted, it can be concluded that all elderly with teeth loss will have the temporomandibular joint disorder and the most severity happens based on teeth loss by using the Helkimo Clinical Disfunction Index score was the moderate disorder.

Conducting a large, multi-site survey about patients’ views on broad consent: challenges and solutions

Directory of Open Access Journals (Sweden)

Maureen E. Smith

2016-11-01

Full Text Available Abstract Background As biobanks play an increasing role in the genomic research that will lead to precision medicine, input from diverse and large populations of patients in a variety of health care settings will be important in order to successfully carry out such studies. One important topic is participants’ views towards consent and data sharing, especially since the 2011 Advanced Notice of Proposed Rulemaking (ANPRM, and subsequently the 2015 Notice of Proposed Rulemaking (NPRM were issued by the Department of Health and Human Services (HHS and Office of Science and Technology Policy (OSTP. These notices required that participants consent to research uses of their de-identified tissue samples and most clinical data, and allowing such consent be obtained in a one-time, open-ended or “broad” fashion. Conducting a survey across multiple sites provides clear advantages to either a single site survey or using a large online database, and is a potentially powerful way of understanding the views of diverse populations on this topic. Methods A workgroup of the Electronic Medical Records and Genomics (eMERGE Network, a national consortium of 9 sites (13 separate institutions, 11 clinical centers supported by the National Human Genome Research Institute (NHGRI that combines DNA biorepositories with electronic medical record (EMR systems for large-scale genetic research, conducted a survey to understand patients’ views on consent, sample and data sharing for future research, biobank governance, data protection, and return of research results. Results Working across 9 sites to design and conduct a national survey presented challenges in organization, meeting human subjects guidelines at each institution, and survey development and implementation. The challenges were met through a committee structure to address each aspect of the project with representatives from all sites. Each committee’s output was integrated into the overall survey plan. A

FY 2000 report on the project on the researcher dispatch type international joint research survey. Survey of the internationalization of research on the effective utilization technology for energy resources; 2000 nendo kenkyusha hakengata kokusai kyodo kenkyu chosa jigyo hokokusho. Energy shigen yukoriyo gijutsu kenkyu kokusaika chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

As to themes of the research survey which contribute to upgrading/diversification of the effective utilization of energy resources and are important in increasing cooperative relations with overseas countries, survey research was conducted by dispatching investigators. Relating to long-life Si solar cells, research survey was made on the reduction in deterioration of solar cell. Concerning the hydrogen carbonless energy system, the economical efficiency of a natural energy/hydrogen combined system was studied for all areas of Aomori prefecture. About the development of the multiple chamber type artificial pancreas for patients with serious diabetes, study using model dogs was investigated. As to the processing of PVC waste, the mechano-chemical method was discussed in the U.S. The paper further surveyed the following: PDE application to the aerospace field, joint developmental study of the reuse type space transport system by Japan and Russia, treatment/recycling of the electric/electronic equipment waste including toxic substances, technology of the manufacture of nano-particles and evaluation of optical characteristics of nano-structures, etc. (NEDO)

Conducting a Withdrawal Survey.

Science.gov (United States)

Aldridge, Sue; Rowley, Jennifer

2001-01-01

A survey at Edge Hill College of Higher Education in Canada, designed to be part of the mechanism for monitoring and evaluating the quality of the student experience, revealed that key factors influencing withdrawal were: course not as expected, traveling difficulties, institution not as expected, domestic difficulties, and financial difficulties.…

Health Care Providers' Knowledge and Practice Gap towards Joint Zoonotic Disease Surveillance System: Challenges and Opportunities, Gomma District, Southwest Ethiopia.

Science.gov (United States)

Gemeda, Desta Hiko; Sime, Abiot Girma; Hajito, Kifle Woldemichael; Gelalacha, Benti Deresa; Tafese, Wubit; Gebrehiwot, Tsegaye Tewelde

2016-01-01

Background. Health care providers play a crucial role for realization of joint zoonotic diseases surveillance by human and animal health sectors, yet there is limited evidence. Hence, this study aimed to determine knowledge and practice gap of health care providers towards the approach for Rabies and Anthrax in Southwest Ethiopia. Methods. A cross-sectional survey was conducted from December 16, 2014, to January 14, 2015. Eligible health care providers were considered for the study. Data were entered in to Epi-data version 3.1 and analyzed using SPSS version 20. Results. A total of 323 (92.02%) health care providers participated in the study. Three hundred sixteen (97.8%) of participants reported that both human and animal health sectors can work together for zoonotic diseases while 96.9% of them replied that both sectors can jointly conduct surveillance. One hundred seventeen (36.2%) of them reported that their respective sectors had conducted joint surveillance for zoonotic diseases. Their involvement was, however, limited to joint outbreak response. Conclusion. There is good opportunity in health care providers' knowledge even though the practice was unacceptably low and did not address all surveillance components. Therefore, formal joint surveillance structure should be in place for optimal implementation of surveillance.

Health Care Providers’ Knowledge and Practice Gap towards Joint Zoonotic Disease Surveillance System: Challenges and Opportunities, Gomma District, Southwest Ethiopia

Directory of Open Access Journals (Sweden)

Desta Hiko Gemeda

2016-01-01

Full Text Available Background. Health care providers play a crucial role for realization of joint zoonotic diseases surveillance by human and animal health sectors, yet there is limited evidence. Hence, this study aimed to determine knowledge and practice gap of health care providers towards the approach for Rabies and Anthrax in Southwest Ethiopia. Methods. A cross-sectional survey was conducted from December 16, 2014, to January 14, 2015. Eligible health care providers were considered for the study. Data were entered in to Epi-data version 3.1 and analyzed using SPSS version 20. Results. A total of 323 (92.02% health care providers participated in the study. Three hundred sixteen (97.8% of participants reported that both human and animal health sectors can work together for zoonotic diseases while 96.9% of them replied that both sectors can jointly conduct surveillance. One hundred seventeen (36.2% of them reported that their respective sectors had conducted joint surveillance for zoonotic diseases. Their involvement was, however, limited to joint outbreak response. Conclusion. There is good opportunity in health care providers’ knowledge even though the practice was unacceptably low and did not address all surveillance components. Therefore, formal joint surveillance structure should be in place for optimal implementation of surveillance.

Analyses and estimates of hydraulic conductivity from slug tests in alluvial aquifer underlying Air Force Plant 4 and Naval Air Station-Joint Reserve Base Carswell Field, Fort Worth, Texas

Science.gov (United States)

Houston, Natalie A.; Braun, Christopher L.

2004-01-01

This report describes the collection, analyses, and distribution of hydraulic-conductivity data obtained from slug tests completed in the alluvial aquifer underlying Air Force Plant 4 and Naval Air Station-Joint Reserve Base Carswell Field, Fort Worth, Texas, during October 2002 and August 2003 and summarizes previously available hydraulic-conductivity data. The U.S. Geological Survey, in cooperation with the U.S. Air Force, completed 30 slug tests in October 2002 and August 2003 to obtain estimates of horizontal hydraulic conductivity to use as initial values in a ground-water-flow model for the site. The tests were done by placing a polyvinyl-chloride slug of known volume beneath the water level in selected wells, removing the slug, and measuring the resulting water-level recovery over time. The water levels were measured with a pressure transducer and recorded with a data logger. Hydraulic-conductivity values were estimated from an analytical relation between the instantaneous displacement of water in a well bore and the resulting rate of head change. Although nearly two-thirds of the tested wells recovered 90 percent of their slug-induced head change in less than 2 minutes, 90-percent recovery times ranged from 3 seconds to 35 minutes. The estimates of hydraulic conductivity range from 0.2 to 200 feet per day. Eighty-three percent of the estimates are between 1 and 100 feet per day.

Post-precipitation bias in band-tailed pigeon surveys conducted at mineral sites

Science.gov (United States)

Overton, C.T.; Schmitz, R.A.; Casazza, Michael L.

2005-01-01

Many animal surveys to estimate populations or index trends include protocol prohibiting counts during rain but fail to address effects of rainfall preceding the count. Prior research on Pacific Coast band-tailed pigeons (Patagioenas fasciata monilis) documented declines in use of mineral sites during rainfall. We hypothesized that prior precipitation was associated with a short-term increase in use of mineral sites following rain. We conducted weekly counts of band-tailed pigeons at 19 Pacific Northwest mineral sites in 2001 and 20 sites in 2002. Results from regression analysis indicated higher counts ???2 days after rain (11.31??5.00% [x????SE]) compared to ???3 days. Individual index counts conducted ???2 days after rain were biased high, resulting in reduced ability to accurately estimate population trends. Models of band-tailed pigeon visitation rates throughout the summer showed increased mineral-site counts during both June and August migration periods, relative to the July breeding period. Our research supported previous studies recommending that mineral-site counts used to index the band-tailed pigeon population be conducted during July. We further recommend conducting counts >3 days after rain to avoid weather-related bias in index estimation. The design of other population sampling strategies that rely on annual counts should consider the influence of aberrant weather not only coincident with but also preceding surveys if weather patterns are thought to influence behavior or detection probability of target species.

The Trauma Center Organizational Culture Survey: development and conduction.

Science.gov (United States)

Davis, Matthew L; Wehbe-Janek, Hania; Subacius, Haris; Pinto, Ruxandra; Nathens, Avery B

2015-01-01

The Trauma Center Organizational Culture Survey (TRACCS) instrument was developed to assess organizational culture of trauma centers enrolled in the American College of Surgeons Trauma Quality Program (ACS TQIP). The objective is to provide evidence on the psychometric properties of the factors of TRACCS and describe the current organizational culture of TQIP-enrolled trauma centers. A cross-sectional study was conducted by surveying a sampling of employees at 174 TQIP-enrolled trauma centers. Data collection was preceded by multistep survey development. Psychometric properties were assessed by an exploratory factor analysis (construct validity) and the item-total correlations and Cronbach alpha were calculated (internal reliability). Statistical outcomes of the survey responses were measured by descriptive statistics and mixed effect models. The response rate for trauma center participation in the study was 78.7% (n = 137). The factor analysis resulted in 16 items clustered into three factors as described: opportunity, pride, and diversity, trauma center leadership, and employee respect and recognition. TRACCS was found to be highly reliable with a Cronbach alpha of 0.90 in addition to the three factors (0.91, 0.90, and 0.85). Considerable variability of TRACCS overall and factor score among hospitals was measured, with the largest interhospital deviations among trauma center leadership. More than 80% of the variability in the responses occurred within rather than between hospitals. TRACCS was developed as a reliable tool for measuring trauma center organizational culture. Relationships between TQIP outcomes and measured organizational culture are under investigation. Trauma centers could apply TRACCS to better understand current organizational culture and how change tools can impact culture and subsequent patient and process outcomes. Copyright © 2015 Elsevier Inc. All rights reserved.

Augmenting a Ballet Dance Show Using the Dancer's Emotion: Conducting Joint Research in Dance and Computer Science

Science.gov (United States)

Clay, Alexis; Delord, Elric; Couture, Nadine; Domenger, Gaël

We describe the joint research that we conduct in gesture-based emotion recognition and virtual augmentation of a stage, bridging together the fields of computer science and dance. After establishing a common ground for dialogue, we could conduct a research process that equally benefits both fields. As computer scientists, dance is a perfect application case. Dancer's artistic creativity orient our research choices. As dancers, computer science provides new tools for creativity, and more importantly a new point of view that forces us to reconsider dance from its fundamentals. In this paper we hence describe our scientific work and its implications on dance. We provide an overview of our system to augment a ballet stage, taking a dancer's emotion into account. To illustrate our work in both fields, we describe three events that mixed dance, emotion recognition and augmented reality.

Results of the 2008/2009 Knowledge and Opinions Surveys Conducted for the U.S. Department of Energy Hydrogen Program

Energy Technology Data Exchange (ETDEWEB)

Schmoyer, R. L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Truett, Tykey [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cooper, Christy [Dept. of Energy (DOE), Washington DC (United States); Chew, Andrea [Dept. of Energy (DOE), Washington DC (United States)

2010-04-01

This report presents results of a 2008/2009 survey of hydrogen and fuel cell awareness conducted for the U.S. Department of Energy (DOE). The 2008/2009 survey follows up on a similar DOE survey conducted in 2004, measuring levels of awareness and understanding of hydrogen and fuel cell technologies in four populations: (1) the general public, (2) students, (3) personnel in state and local governments, and (4) potential end users of hydrogen and fuel cell technologies in business and industry. The 2008/2009 survey includes these four groups and adds a fifth group, safety and code officials. The same survey methods were used for both surveys; the 2008/2009 survey report includes a comparison of 2004 and 2008/2009 findings. Information from these surveys will be used to enhance hydrogen and fuel cell education strategies.

Thermal contact resistance measurement of conduction cooled binary current lead joint block in cryocooler based self field I-V characterization facility

Energy Technology Data Exchange (ETDEWEB)

Kundu, Ananya, E-mail: ananya@ipr.res.in; Das, Subrat Kumar; Agarwal, Anees Bano Pooja; Pradhan, Subrata [Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428 (India)

2016-05-23

In the present study thermal resistance of conduction cooled current lead joint block employing two different interfacial material namely AlN sheet and Kapton Film have been studied in the temperature range 5K-35K. In each case, the performance of different interlayer materials e.g. Indium foil for moderately pressurized contacts (contact pressure <1 MPa), and Apiezon N Grease, GE varnish for low pressurized contact (contact pressure <1 MPa) is studied. The performances of AlN joint with Indium foil and with Apeizon N Grease are studied and it is observed that the contact resistance reduces more with indium foil as compared to greased contact. The contact resistance measurements of Kapton film with Apiezon N grease and with GE varnish were also carried out in the same temperature range. A comparative study of AlN joint with Indium foil and Kapton with GE varnish as filler material is carried out to demonstrate better candidate material among Kapton and AlN for a particular filler material in the same temperature range.

Infrastructure Joint Venture Projects in Malaysia: A Preliminary Study

Science.gov (United States)

Romeli, Norsyakilah; Muhamad Halil, Faridah; Ismail, Faridah; Sufian Hasim, Muhammad

2018-03-01

As many developed country practise, the function of the infrastructure is to connect the each region of Malaysia holistically and infrastructure is an investment network projects such as transportation water and sewerage, power, communication and irrigations system. Hence, a billions allocations of government income reserved for the sake of the infrastructure development. Towards a successful infrastructure development, a joint venture approach has been promotes by 2016 in one of the government thrust in Construction Industry Transformation Plan which encourage the internationalisation among contractors. However, there is depletion in information on the actual practise of the infrastructure joint venture projects in Malaysia. Therefore, this study attempt to explore the real application of the joint venture in Malaysian infrastructure projects. Using the questionnaire survey, a set of survey question distributed to the targeted respondents. The survey contained three section which the sections are respondent details, organizations background and project capital in infrastructure joint venture project. The results recorded and analyse using SPSS software. The contractors stated that they have implemented the joint venture practice with mostly the client with the usual construction period of the infrastructure project are more than 5 years. Other than that, the study indicates that there are problems in the joint venture project in the perspective of the project capital and the railway infrastructure should be given a highlights in future study due to its high significant in term of cost and technical issues.

Infrastructure Joint Venture Projects in Malaysia: A Preliminary Study

Directory of Open Access Journals (Sweden)

Romeli Norsyakilah

2018-01-01

Full Text Available As many developed country practise, the function of the infrastructure is to connect the each region of Malaysia holistically and infrastructure is an investment network projects such as transportation water and sewerage, power, communication and irrigations system. Hence, a billions allocations of government income reserved for the sake of the infrastructure development. Towards a successful infrastructure development, a joint venture approach has been promotes by 2016 in one of the government thrust in Construction Industry Transformation Plan which encourage the internationalisation among contractors. However, there is depletion in information on the actual practise of the infrastructure joint venture projects in Malaysia. Therefore, this study attempt to explore the real application of the joint venture in Malaysian infrastructure projects. Using the questionnaire survey, a set of survey question distributed to the targeted respondents. The survey contained three section which the sections are respondent details, organizations background and project capital in infrastructure joint venture project. The results recorded and analyse using SPSS software. The contractors stated that they have implemented the joint venture practice with mostly the client with the usual construction period of the infrastructure project are more than 5 years. Other than that, the study indicates that there are problems in the joint venture project in the perspective of the project capital and the railway infrastructure should be given a highlights in future study due to its high significant in term of cost and technical issues.

Functionally Graded Adhesives for Composite Joints

Science.gov (United States)

Stapleton, Scott E.; Waas, Anthony M.; Arnold, Steven M.

2012-01-01

Adhesives with functionally graded material properties are being considered for use in adhesively bonded joints to reduce the peel stress concentrations located near adherend discontinuities. Several practical concerns impede the actual use of such adhesives. These include increased manufacturing complications, alterations to the grading due to adhesive flow during manufacturing, and whether changing the loading conditions significantly impact the effectiveness of the grading. An analytical study is conducted to address these three concerns. An enhanced joint finite element, which uses an analytical formulation to obtain exact shape functions, is used to model the joint. Furthermore, proof of concept testing is conducted to show the potential advantages of functionally graded adhesives. In this study, grading is achieved by strategically placing glass beads within the adhesive layer at different densities along the joint.

Characteristics of joint physical custody families in Flanders

Directory of Open Access Journals (Sweden)

An Katrien Sodermans

2013-04-01

Full Text Available BACKGROUND Research conducted in the 1990s showed that children who live alternately with their mother and father after divorce (joint physical custody have closer relationships with both parents and better emotional outcomes. In 1995 and 2006, joint legal custody and joint physical custody became the default judicial recommendations in Belgium. These defaults served to increase the incidence of joint custody arrangements. However, parents with joint physical custody arrangements who divorced before 2006 may have had higher socio-economic standing and lower conflict relationships than couples that divorced afterwards. Thus earlier research on the impact of joint physical custody arrangements on child outcomes may be too optimistic when considering children of recently divorced parents. OBJECTIVE This study examines the characteristics of four different physical custody arrangements (sole mother, sole father, joint physical, and flexible custody in Flanders, Belgium, and whether these characteristics have changed over time. The legal changes in 1995 and 2006 are used to distinguish three divorce cohorts. METHODS We use data on 2,207 couples that legally divorced between 1971 and 2010 from the Divorce in Flanders project, a large-scale representative multi-actor survey. Multinomial logistic regression models provide estimates of the likelihoods of different physical custody arrangements. RESULTS The incidence of sole mother custody has decreased over the last decades and children increasingly alternate between the households of the mother and the father after divorce. The incidence of sole father custody has remained low. Higher educated parents are more likely to have joint physical custody arrangements than parents from lower social classes. Also, within couples, relative educational levels are important because the higher educated spouse is more likely to have physical custody of the child. We also find that the associations between socio

Overview of the IAEA Joint Convention and Implementation Status of the Obligation as the Contracting Party of the 5th Joint Convention

International Nuclear Information System (INIS)

Lee, Jeong Ken; Lee, Youn Keun; Ahn, Sang Myeon

2016-01-01

The Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management (Joint Convention) was adopted on 5 September 1997 by a Diplomatic Conference convened by the International Atomic Energy Agency (IAEA). The Joint Convention was opened for signature at Vienna in September 1997 and will remain open for signature until its entry into force. Korean government signed the Joint Convention in 1997 and this Convention was effective in 2002 as the Convention No. 1612. This paper will show overview of the Joint Convention and implementation status of the obligation as a Contracting Party of the 5th Joint Convention. The Joint Convention is the inter-national convention organized by the IAEA. All contracting parties shall comply with rules of the Joint Convention and conduct the obligation of this convention. Korean government successfully conducted all obligation (attending Organization Meeting and Review Meeting, submitting paper including National Report, question paper and answer paper) of the 5th Joint Convention from May 2014 to May 2015, and will prepare the obligation of the 6th Joint Convention

Generalised joint hypermobility and knee joint hypermobility: prevalence, knee joint symptoms and health-related quality of life in a Danish adult population.

Science.gov (United States)

Junge, Tina; Henriksen, Peter; Hansen, Sebrina; Østengaard, Lasse; Golightly, Yvonne M; Juul-Kristensen, Birgit

2017-10-27

Several biomechanical factors, such as knee joint hypermobility (KJH), are suggested to play a role in the etiology of knee joint symptoms and knee osteoarthritis. Nevertheless, the prevalence or consequences of KJH solely or included in the classification of generalized joint hypermobility (GJHk) is unknown for a general population. Therefore, the objectives were to report the prevalence of self-reported GJHk and KJH, as well as the association of these conditions to knee joint symptoms, severity and duration of symptoms, and health-related quality of life (HRQoL) in a Danish adult population. This study is a cross-sectional population-based survey of 2056 Danish adults. Respondents received online questionnaires of GJHk and KJH, knee joint symptoms, the severity and duration of these, as well as HRQoL. Total response rate was 49% (n = 1006). The prevalence of self-reported GJHk and KJH was 13% and 23%, mostly representing women. More than half of the respondents with GJHk and KJH had knee joint symptoms. The odds for reporting knee joint symptoms, severity of knee joint symptoms and duration of knee joint symptoms were twice as high for respondents with GJHk and KJH. Respondents with GJHk and KJH reported lower HRQoL. GJHk and KJH were frequently reported in the Danish adult population, mostly in women. Respondents with GJHk and KJH were two times more likely to report knee joint-related symptoms such as pain, reduced performance of usual activity and lower HRQoL. The impact of these conditions on HRQoL is comparable with knee osteoarthritis. © 2017 Asia Pacific League of Associations for Rheumatology and John Wiley & Sons Australia, Ltd.

Radiographical survey of carpal joints with ulcerous lesions of articular cartilage in Japanese black cattle

International Nuclear Information System (INIS)

Taura, Y.; Nishimura, R.; Sasaki, N.; Takeuchi, A.; Usui, K.

1989-01-01

For the purpose of investigating a different feeding factor in the outbreak of ulcerous lesions of articular cartilage, a radiographical survey of carpal joints was carried out, using Japanese Black cattle at Yamanashi prefecture, and the following results were obtained. 1) The samples for this study were obtained from farms in which using different feeding systems were adopted, such as fattening in drylot (A) : 12 steers (7-32 months old, 221-643 kg body weight), rearing in pasture (B) : 10 steers (7-12 months old, 124-210 kg body weight) and fattening in drylot after rearing in pasture (C) : 5 steers (11-14 months old, 238-271 kg body weight). 2) The radiographic lesions of the carpometacarpal joint were classified into the following five grades, normal (0), slight (I, II), moderate (III) and severe (IV), using a high contrast radiogram. 3) In group A, the lesions were observed in all the metacarpal bone III and carpal bone II@@@III. In the former case, incidence of radiographic lesions was 100%, in which 67% were severe and the remaining 33% consisted of moderate (25%) and slight changes (8%), which was higher than the others. 4) In group B, the incidence of the radiographic lesions of metacarpal bone III was 90%, but in which all of those were of slight changes (I and II). 5) In group C, the incidence of radiographic lesions of the metacarpal bone III was 80%, in which 20% were severe and the remaining 60% were slight ones. 6) No lesions were observed in any lateral half of the joint (carpal bone IV and metacarpal bone IV). 7) Although only the 7 months old steers of group A had very severe radiographic changes, the 10-12 months old steers of the group B showed no clear changes

Survey on Ethical Conduct Thresholds in Cardiologal Medical Practice in Argentina.

Science.gov (United States)

Doval, Hernán C; Tajer, Carlos D; Borracci, Raúl A; Nuñez, Carmen; Samarelli, Marisa; Tamini, Susana

2015-08-01

The purpose of this study was to analyze the attitude of a group of cardiologists on the ethical conducts they would accept or adopt when encountered with different hypothetical situations of medical practice. Between August and September of 2011, 700 Argentine cardiologists were surveyed in situations which posed ethical dilemmas in the patient-physician relationship, among colleagues or involving financial agreements with employers or the pharmaceutical industry. Ethical conflicts were evidenced in a series of inappropriate conducts such as differential fees, trips and meals sponsored by laboratories, splitting fees, overbilling, self-referral, charging for patient referral, financial compensation for ordering medical procedures, and various situations derived from the relationship with employers. In general, financial compensation from the pharmaceutical industry was more accepted than the conflictive situations which directly involved patients, colleagues or employers. The rejection of these conducts, the physicians' deontological education and the improvement of financial and organizational conditions in medical practice will help to encourage better medical professionalism and avoid unseemly behaviors. © 2013 John Wiley & Sons Ltd.

Review of Prosthetic Joint Infection from Listeria monocytogenes.

Science.gov (United States)

Bader, Gilbert; Al-Tarawneh, Mohammed; Myers, James

2016-12-01

Prosthetic joint infection from Listeria monocytogenes is rare. We decided to shed light on this illness and review the reported cases to better understand its characteristics. We conducted a comprehensive review of the English literature using PubMed. We also included one case that we had managed. We found 25 cases of prosthetic joint infection from L. monocytogenes reported individually and a retrospective study of 43 cases of joint and bone listerial infection, including 34 with prosthetic joint infection, conducted in France. We have described their clinical and para-clinical features and tried to elaborate on the pathophysiology, treatment, and prevention. Prosthetic joint infection from L. monocytogenes is mainly late. Systemic inflammation may be absent. Although rare, it must be suspected in patients at high risk for both prosthetic joint and listerial infections. In addition, those patients must be instructed on appropriate preventive measures.

Fiscal 1999 research report. Basic research for promotion of joint implementation programs (Basic energy efficiency survey at Russia's Severstal Steelworks); 1999 nendo Russia Severstal seitetsusho sho energy kihon chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

In the Kyoto Protocol adopted at COP3 (The 3rd Conference of the Parties), a framework was created of international cooperative efforts for greenhouse gas reduction, such as joint implementation with advanced countries and clean development mechanism construction with developing countries. As part of the above-named NEDO-sponsored project, a survey is conducted at the Severstal Steelworks in the effort to explore projects that will lead to joint implementation. It is then found, concerning the feasibility of introducing large waste heat recovery and energy-saving facilities into the steelworks, that there will be sufficient room if natural gas for the domestic power generators installed at two sites in the steelworks is reduced and that in the energy profile no problems are detected that will impede project implementation. Energy efficiency measure introduction feasibility is examined and the results are shown, which involve sintering furnace modification, sintering cooler waste heat recovery, converter exhaust gas recovery, and TRT (top-pressure recovery turbine) installation. In case all these measure are fully implemented, CO2 emissions will be reduced by 370,000 tons/year. (NEDO)

Shear-flow coupling in non-planar rock joints

International Nuclear Information System (INIS)

Makurat, A.; Barton, N.

1985-01-01

Crystalline rock masses are regarded as a possible host rock for permanent nuclear waste disposal. During the excavation of the required shafts and tunnels, the initial state of stress will be changed and cause a deformation of the rock mass and discontinuities. During the lifetime of the nuclear repository joint apertures may change due to thermally induced stress variations during the heating and cooling phase. As the conductivity of a joint is very sensitive to its aperture, fluid flow from and towards a repository, as well as the potential transport times of radionuclides are highly dependent on the deformability of the joints. Theoretical calculations of coupled flow in rock joints (Barton et al. 1984) predict an increase of conductivity of several orders of magnitude for the first few millimeters for shear displacement. The shear-dilation-conductivity coupling for two block sizes at two effective stress levels is shown

Thermal contact conductance

CERN Document Server

Madhusudana, Chakravarti V

2013-01-01

The work covers both theoretical and practical aspects of thermal contact conductance. The theoretical discussion focuses on heat transfer through spots, joints, and surfaces, as well as the role of interstitial materials (both planned and inadvertent). The practical discussion includes formulae and data that can be used in designing heat-transfer equipment for a variety of joints, including special geometries and configurations. All of the material has been updated to reflect the latest advances in the field.

Best Manufacturing Practices. Report of Survey Conducted at Stafford County Public Schools, Stafford County, VA

National Research Council Canada - National Science Library

1994-01-01

During the week of August 8, 1994, a Best Manufacturing Practices (BMP) survey was conducted at the Stafford County Public Schools located in Stafford County, Virginia, considered one of the fastest growing counties in the state...

Effect of Strain Rate on Joint Strength and Failure Mode of Lead-Free Solder Joints

Science.gov (United States)

Lin, Jian; Lei, Yongping; Fu, Hanguang; Guo, Fu

2018-03-01

In surface mount technology, the Sn-3.0Ag-0.5Cu solder joint has a shorter impact lifetime than a traditional lead-tin solder joint. In order to improve the impact property of SnAgCu lead-free solder joints and identify the effect of silver content on tensile strength and impact property, impact experiments were conducted at various strain rates on three selected SnAgCu based solder joints. It was found that joint failure mainly occurred in the solder material with large plastic deformation under low strain rate, while joint failure occurred at the brittle intermetallic compound layer without any plastic deformation at a high strain rate. Joint strength increased with the silver content in SnAgCu alloys in static tensile tests, while the impact property of the solder joint decreased with increasing silver content. When the strain rate was low, plastic deformation occurred with failure and the tensile strength of the Sn-3.0Ag-0.5Cu solder joint was higher than that of Sn-0.3Ag-0.7Cu; when the strain rate was high, joint failure mainly occurred at the brittle interface layer and the Sn-0.3Ag-0.7Cu solder joint had a better impact resistance with a thinner intermetallic compound layer.

Medication errors in chemotherapy preparation and administration: a survey conducted among oncology nurses in Turkey.

Science.gov (United States)

Ulas, Arife; Silay, Kamile; Akinci, Sema; Dede, Didem Sener; Akinci, Muhammed Bulent; Sendur, Mehmet Ali Nahit; Cubukcu, Erdem; Coskun, Hasan Senol; Degirmenci, Mustafa; Utkan, Gungor; Ozdemir, Nuriye; Isikdogan, Abdurrahman; Buyukcelik, Abdullah; Inanc, Mevlude; Bilici, Ahmet; Odabasi, Hatice; Cihan, Sener; Avci, Nilufer; Yalcin, Bulent

2015-01-01

Medication errors in oncology may cause severe clinical problems due to low therapeutic indices and high toxicity of chemotherapeutic agents. We aimed to investigate unintentional medication errors and underlying factors during chemotherapy preparation and administration based on a systematic survey conducted to reflect oncology nurses experience. This study was conducted in 18 adult chemotherapy units with volunteer participation of 206 nurses. A survey developed by primary investigators and medication errors (MAEs) defined preventable errors during prescription of medication, ordering, preparation or administration. The survey consisted of 4 parts: demographic features of nurses; workload of chemotherapy units; errors and their estimated monthly number during chemotherapy preparation and administration; and evaluation of the possible factors responsible from ME. The survey was conducted by face to face interview and data analyses were performed with descriptive statistics. Chi-square or Fisher exact tests were used for a comparative analysis of categorical data. Some 83.4% of the 210 nurses reported one or more than one error during chemotherapy preparation and administration. Prescribing or ordering wrong doses by physicians (65.7%) and noncompliance with administration sequences during chemotherapy administration (50.5%) were the most common errors. The most common estimated average monthly error was not following the administration sequence of the chemotherapeutic agents (4.1 times/month, range 1-20). The most important underlying reasons for medication errors were heavy workload (49.7%) and insufficient number of staff (36.5%). Our findings suggest that the probability of medication error is very high during chemotherapy preparation and administration, the most common involving prescribing and ordering errors. Further studies must address the strategies to minimize medication error in chemotherapy receiving patients, determine sufficient protective measures

Joint physical custody, turning to parents for emotional support, and subjective health: A study of adolescents in Stockholm, Sweden.

Science.gov (United States)

Låftman, Sara Brolin; Bergström, Malin; Modin, Bitte; Östberg, Viveca

2014-07-01

Among children with separated parents, the arrangement of joint physical custody, i.e. children living equally much in both parents' homes, has increased substantially during the last decades in Sweden. To date, empirical research on the living conditions of this group is limited. This study analyses family type differences in turning to parents for emotional support and in subjective health among adolescents. The focus of the study is adolescents in joint physical custody, who are compared with those living with two original parents in the same household; those living (only) in a single-parent household; and those living (only) in a reconstituted family. The data come from the Stockholm School Survey of 2004, a total population survey of students in grade 9 (15-16 years) in Stockholm (n=8,840). Ordinary least squares (OLS) regressions were conducted. Turning to both parents about problems is most commonly reported by adolescents in intact families, followed by those in joint physical custody. Adolescents in non-traditional family types report worse subjective health than adolescents in intact families, but the difference is smaller for those in joint physical custody than for those living with a single parent. The slightly poorer health of adolescents in joint physical custody than those in intact families is not explained by their lower use of parents as a source of emotional support. The study suggests that joint physical custody is associated with a higher inclination to use parents as a source of emotional support and better subjective health than other post-divorce family types. © 2014 the Nordic Societies of Public Health.

Joint production and corporate pricing: An empirical analysis of joint products in the petroleum industry

International Nuclear Information System (INIS)

Karimnejad, H.

1990-01-01

This dissertation investigates the pricing mechanism of joint products in large multi-plant and multi-product corporations. The primary objective of this dissertation is to show the consistency of classical theories of production with corporate pricing of joint products. This dissertation has two major parts. Part One provides a theoretical framework for joint production and corporate pricing. In this part, joint production is defined and its historical treatment by classical and contemporary economists is analyzed. Part Two conducts an empirical analysis of joint products in the US petroleum industry. Methods of cost allocation are used in the pricing of each individual petroleum product. Three methods are employed to distribute joint production costs to individual petroleum products. These methods are, the sales value method, the barrel gravity method and the average unit cost method. The empirical findings of dissertation provide useful guidelines for pricing policies of large multi-product corporations

Development of osteochondrosis in the tarsocrural joint and osteochondral fragments in the fetlock joints of Standardbred trotters. I. A radiological survey

International Nuclear Information System (INIS)

Carlsten, J.; Sandgren, B.; Dalin, G.

1993-01-01

In a longitudinal study 77 Standardbred foals were examined 6 times from birth to the age of 16 months. The radiological examination included 9 views, selected to demonstrate the time of occurrence and the appearance of early radiographic signs of osteochondrosis in the tarsocrural joints (OC), palmar/plantar osteochondral fragments in the fetlock joints (POF) and ununited proximal palmar/plantar eminences of the proximal phalanx (UPE). Subchondral bone defects with a diameter >5 mm and/or osseous fragments were considered significant radiographic findings and were correlated to clinical signs.Eight horses (10.4%) showed OC in the tarsocrural joints at the age of 12 months. All 8 horses showed radiographic changes indicating early OC lesions that were detectable before the age of 3 months. In 4 of these horses subchondral bone defects and/or fragments at the intermediate ridge of the distal tibia were visible before 1 month of age. Eleven horses showed radiographic changes first detected between 1 and 3 months of age that reverted to normal appearance at 8 months of age. In no case was a significant radiographic finding first detected between the age of 8 and 16 months. The radiographic findings of permanent hock OC were significantly correlated with the presence of tarsocrural joint effusions but did not correlate with lameness.At the age of 12 months, 11 horses (14.3%) showed significant radiographic changes with defects and/or osseous fragments in the metacarpo- and metatarsophalangeal (fetlock) joints. In all of these horses early indications of these changes were detected before the age of 5 months. In 7 horses early radiographic signs of abnormal ossification reverted to a normal appearance before the age of 8 months. No additional significant radiographic findings were detected after the age of 8 months. There was no correlation between radiographic findings and fetlock joint synovial effusion or lameness.Osteochondrosis of the tarsocrural joints and palmar

Report on the results of the safety culture survey conducted in PNRI

International Nuclear Information System (INIS)

Garcia, Corazon M.; Nohay, Carl M.; Badinas, Nelson P.; Melendez, Johnylen V.; Parami, Vangeline K.

2001-01-01

An initial safety culture survey was conducted in the Philippine Nuclear Research Institute (PNRI). Sixty six (66) questionnaires as given in A. Adams and A. Williamson's Measurement of Safety Culture in the Nuclear Industry, UNSW, July 1999 were distributed to the different units of PNRI. The number of sets of survey sheets distributed to the different units corresponded to the number of personnel in the unit based on the information obtained from them. Results were obtained from only 33 respondents. ANSTO has been requested to analyze the results of this survey. While waiting for the results from ANSTO, we attempted to proceed with this analysis in order to learn and practice applying the procedure based on the reference cited above.The respondents from the PNRI showed on the overall neutral views towards safety and their work. Although a minority showed positive responses to safety while a small minority showed negative responses. A remarkable result is that all respondents show strong concern over the welfare of the institute, indicating that there is still a good chance for safety culture to be developed positively among the employees given the proper strategies for motivation. (author)

10 CFR 1040.123 - Consolidated or joint hearings.

Science.gov (United States)

2010-01-01

... ACTIVITIES Enforcement Opportunity for Hearing § 1040.123 Consolidated or joint hearings. In cases in which... 10 Energy 4 2010-01-01 2010-01-01 false Consolidated or joint hearings. 1040.123 Section 1040.123... departments or agencies, where applicable, provide for the conduct of consolidated or joint hearings and for...

Associations between yoga practice and joint problems: a cross-sectional survey among 9151 Australian women.

Science.gov (United States)

Lauche, Romy; Schumann, Dania; Sibbritt, David; Adams, Jon; Cramer, Holger

2017-07-01

Yoga exercises have been associated with joint problems recently, indicating that yoga practice might be potentially dangerous for joint health. This study aimed to analyse whether regular yoga practice is associated with the frequency of joint problems in upper middle-aged Australian women. Women aged 62-67 years from the Australian Longitudinal Study on Women's Health (ALSWH) were questioned in 2013 whether they experienced regular joint pain or problems in the past 12 months and whether they regularly practiced yoga. Associations of joint problems with yoga practice were analysed using Chi-squared tests and multiple logistic regression modelling. Of 9151 women, 29.8% reported regular problems with stiff or painful joints, and 15.2, 11.9, 18.1 and 15.9% reported regular problems with shoulders, hips, knees and feet, respectively, in the past 12 months. Yoga was practiced sometimes by 10.1% and often by 8.4% of women. Practicing yoga was not associated with upper or lower limb joint problems. No association between yoga practice and joint problems has been identified. Further studies are warranted for conclusive judgement of benefits and safety of yoga in relation to joint problems.

Conducting a Southern Pine Beetle Survey Using Digital Aerial Sketchmapping (DASM) - An Overview

Science.gov (United States)

Chris A. Steiner

2011-01-01

This is an overview on conducting a southern pine beetle (SPB) survey using Digital Aerial Sketchmapping (DASM); for a detailed treatment of DASM visit the following Web site: http://www.fs.fed.us/foresthealth/ technology/dasm.shtml. Sketchmapping – “A remote sensing technique of observing forest change events from an aircraft and documenting them manually on a map” (...

10 CFR 4.64 - Consolidated or joint hearings.

Science.gov (United States)

2010-01-01

... Consolidated or joint hearings. In cases in which the same or related facts are asserted to constitute... 10 Energy 1 2010-01-01 2010-01-01 false Consolidated or joint hearings. 4.64 Section 4.64 Energy... or agencies, where applicable, provide for the conduct of consolidated or joint hearings, and for the...

Athletes’ Shoulder Joints Traumas Manual Therapy Rehabilitation

OpenAIRE

A.N. Sykhorychko; Т.G. Kovalenko; М.А. Sykhorychko

2012-01-01

The examination of 60 athletes, aged 18-30, suffering from chronic pains in shoulder joints was conducted. So, 20 women and 20 men were engaged in track and field and team sports, 15 in weightlifting and strength sports, 5 women in strength sports. Shoulder Joints Traumas Manual Therapy enables to reduce pain syndrome, restore shoulder joint flexibility, normalize trophism after trauma and normalize cervicothoracic transition biomechanics.

Practice of ultrasound-guided arthrocentesis and joint injection, including training and implementation, in Europe: results of a survey of experts and scientific societies

DEFF Research Database (Denmark)

Mandl, Peter; Naredo, Esperanza; Conaghan, Philip G

2012-01-01

Objectives. To document the practice and training opportunities of US-guided arthrocentesis and joint injection (UGAJ) among rheumatologists in the member countries of the European League Against Rheumatism (EULAR). Methods. An English-language questionnaire, containing questions on demographics......, clinical and practical aspects of UGAJ, training options in UGAJ for rheumatologists, UGAJ education in the rheumatology training curriculum and other structured education programmes in UGAJ was sent to three different groups: (i) all national rheumatology societies of EULAR; (ii) all national societies...... countries responded to the questionnaire (61.3% of national rheumatology societies, 25% of the national US societies and 100% of expert ultrasonographers). In the majority of countries (85%) 80%) rate of rheumatologists performing conventional joint injection in most of the surveyed countries. The reported...

A joint model of mode and shipment size choice using the first generation of Commodity Flow Survey Public Use Microdata

Directory of Open Access Journals (Sweden)

Monique Stinson

2017-12-01

Full Text Available A behavior-based supply chain and freight transportation model was developed and implemented for the Maricopa Association of Governments (MAG and Pima Association of Governments (PAG. This innovative, data-driven modeling system simulates commodity flows to, from and within Phoenix and Tucson Megaregion and is used for regional planning purposes. This paper details the logistics choice component of the system and describes the position and functioning of this component in the overall framework. The logistics choice model uses a nested logit formulation to evaluate mode choice and shipment size jointly. Modeling decisions related to integrating this component within the overall framework are discussed. This paper also describes practical insights gained from using the 2012 Commodity Flow Survey Public Use Microdata (released in 2015, which was the principal data source used to estimate the joint shipment size-mode choice nested logit model. Finally, the validation effort and related lessons learned are described.

Conducting Surveys and Data Collection: From Traditional to Mobile and SMS-based Surveys

Directory of Open Access Journals (Sweden)

Iftikhar Alam

2014-08-01

Full Text Available Fresh, bias-free and valid data collected using different survey modes is considered an essential requirement for smooth functioning and evolution of an organization. Surveys play a major role in making in-time correct decisions and generating reports. The aim of this study is to compare and investigate state-of-the-art in different survey modes including print, email, online, mobile and SMS-based surveys. Results indicated that existing methods are neither complete nor sufficient to fulfil the overall requirements of an organization which primarily rely on surveys. Also, it shows that SMS is a dominant method for data collection due to its pervasiveness. However, existing SMS-based data collection has limitations like limited number of characters per SMS, single question per SMS and lake of multimedia support. Recent trends in data collection emphasis on data collection applications for smart phones. However, in developing countries low-end mobile devices are still extensively used which makes the data collection difficult from man in the street. The paper conclude that existing survey modes and methods should be improved to get maximum responses quickly in low cost manner. The study has contributed to the area of surveying and data collection by analysing different factors such as cost, time and response rate. The results of this study can help practitioners in creating a more successful surveying method for data collection that can be effectively used for low budget projects in developed as well as developing countries.

Athletes’ Shoulder Joints Traumas Manual Therapy Rehabilitation

Directory of Open Access Journals (Sweden)

A.N. Sykhorychko

2012-06-01

Full Text Available The examination of 60 athletes, aged 18-30, suffering from chronic pains in shoulder joints was conducted. So, 20 women and 20 men were engaged in track and field and team sports, 15 in weightlifting and strength sports, 5 women in strength sports. Shoulder Joints Traumas Manual Therapy enables to reduce pain syndrome, restore shoulder joint flexibility, normalize trophism after trauma and normalize cervicothoracic transition biomechanics.

Joint Inversion Modelling of Geophysical Data From Lough Neagh Basin

Science.gov (United States)

Vozar, J.; Moorkamp, M.; Jones, A. G.; Rath, V.; Muller, M. R.

2015-12-01

Multi-dimensional modelling of geophysical data collected in the Lough Neagh Basin is presented in the frame of the IRETHERM project. The Permo-Triassic Lough Neagh Basin, situated in the southeastern part of Northern Ireland, exhibits elevated geothermal gradient (~30 °C/km) in the exploratory drilled boreholes. This is taken to indicate good geothermal exploitation potential in the Sherwood Sandstone aquifer for heating, and possibly even electricity production, purposes. We have used a 3-D joint inversion framework for modelling the magnetotelluric (MT) and gravity data collected to the north of the Lough Neagh to derive robust subsurface geological models. Comprehensive supporting geophysical and geological data (e.g. borehole logs and reflection seismic images) have been used in order to analyze and model the MT and gravity data. The geophysical data sets were provided by the Geological Survey of Northern Ireland (GSNI). Considering correct objective function weighting in favor of noise-free MT response functions is particularly important in joint inversion. There is no simple way how to correct distortion effects the 3-D responses as can be done in 1-D or 2-D case. We have used the Tellus Project airborne EM data to constrain magnetotelluric data and correct them for near surface effects. The shallow models from airborne data are used to constrain the uppermost part of 3-D inversion model. Preliminary 3-D joint inversion modeling reveals that the Sherwood Sandstone Group and the Permian Sandstone Formation are imaged as a conductive zone at the depth range of 500 m to 2000 m with laterally varying thickness, depth, and conductance. The conductive target sediments become shallower and thinner to the north and they are laterally continuous. To obtain better characterization of thermal transport properties of investigated area we used porosity and resistivity data from the Annaghmore and Ballymacilroy boreholes to estimate the relations between porosity

Operations Research Games : A Survey

NARCIS (Netherlands)

Borm, P.E.M.; Hamers, H.J.M.; Hendrickx, R.L.P.

2001-01-01

This paper surveys the research area of cooperative games associated with several types of operations research problems in which various decision makers (players) are involved.Cooperating players not only face a joint optimisation problem in trying, e.g., to minimise total joint costs, but also face

Investigation of environmental radioactivity in waste dumping areas of the far eastern seas. JAERI's activities in the 1st Japanese-Korean-Russian joint expedition 1994

International Nuclear Information System (INIS)

Amano, Hikaru; Matsunaga, Takeshi; Yabuuchi, Noriaki.

1996-10-01

Large quantities of radioactive waste have been dumped in the Far Eastern Sea by the former USSR and Russia. In order to survey marine radioactive contamination in the Far Eastern Sea, the first Japanese-Korean-Russian joint expedition was conducted according to the governmental agreement. The joint expedition was conducted at the areas of the Russian radioactive waste dumping site from March 18 1994 to April 6, 1994. JAERI participated in this expedition according to the request from STA Japan, and conducted mainly on-board measurement of marine radioactivities. The results showed that the radionuclides concentrations in seawater and seabed sediment samples from the study site were not different from those in the western North Pacific. This report summarises JAERI's activities in the expedition. Final report by Japanese-Korean-Russian government and IAEA is annexed. (author)

Insight from Public Surveys Related to Siting of Nuclear Waste Facilities: An Overview of Findings from a 2015 Nationwide Survey of US Residents

Energy Technology Data Exchange (ETDEWEB)

Jenkins-Smith, Hank C. [Univ. of Oklahoma, Norman, OK (United States); Gupta, Kuhika [Univ. of Oklahoma, Norman, OK (United States); Silva, Carol L. [Univ. of Oklahoma, Norman, OK (United States); Bonano, Evaristo J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rechard, Robert P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-09-01

The results described in this report are an analysis of nationwide surveys, administered between 2006 and 2015, which measure preferences of US residents concerning the environment and energy sources. The Energy & Environment (EE) survey series is conducted annually by the Center for Energy, Security & Society (CES&S), a joint research collaboration of the University of Oklahoma and Sandia National Laboratories. The annual EE survey series is designed to track evolving public views on nuclear materials management in the US. The 2015 wave of the Energy and Environment survey (EE15) was implemented using a web-based questionnaire, and was completed by 2,021 respondents using an Internet sample that matches the characteristics of the adult US population as estimated in the US Census. A special focus of the EE15 survey is how survey respondents understand and evaluate “consent” in the context of the storage and transportation of spent nuclear fuel (SNF). This report presents an overview of key results from analyses of questions related to consent-based siting and other elements of the nuclear energy fuel cycle.

Interdependency in joint ventures: The relationship between dependency asymmetry and performance

NARCIS (Netherlands)

Kemp, R.G.M.; Ghauri, P.N.

2001-01-01

This paper reports the results of a survey on joint venture collaborations. It focuses on the relations between the level and intensity of conflict, trust and norms of exchange, and ultimately the performance of a joint venture, in case of dependency asymmetry between the partners. In management

Space Suit Joint Torque Testing

Science.gov (United States)

Valish, Dana J.

2011-01-01

In 2009 and early 2010, a test was performed to quantify the torque required to manipulate joints in several existing operational and prototype space suits in an effort to develop joint torque requirements appropriate for a new Constellation Program space suit system. The same test method was levied on the Constellation space suit contractors to verify that their suit design meets the requirements. However, because the original test was set up and conducted by a single test operator there was some question as to whether this method was repeatable enough to be considered a standard verification method for Constellation or other future space suits. In order to validate the method itself, a representative subset of the previous test was repeated, using the same information that would be available to space suit contractors, but set up and conducted by someone not familiar with the previous test. The resultant data was compared using graphical and statistical analysis and a variance in torque values for some of the tested joints was apparent. Potential variables that could have affected the data were identified and re-testing was conducted in an attempt to eliminate these variables. The results of the retest will be used to determine if further testing and modification is necessary before the method can be validated.

Investigation of environmental radioactivity in waste dumping areas of the far eastern seas. JAERI`s activities in the 1st Japanese-Korean-Russian joint expedition 1994

Energy Technology Data Exchange (ETDEWEB)

Amano, Hikaru; Matsunaga, Takeshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Yabuuchi, Noriaki

1996-10-01

Large quantities of radioactive waste have been dumped in the Far Eastern Sea by the former USSR and Russia. In order to survey marine radioactive contamination in the Far Eastern Sea, the first Japanese-Korean-Russian joint expedition was conducted according to the governmental agreement. The joint expedition was conducted at the areas of the Russian radioactive waste dumping site from March 18 1994 to April 6, 1994. JAERI participated in this expedition according to the request from STA Japan, and conducted mainly on-board measurement of marine radioactivities. The results showed that the radionuclides concentrations in seawater and seabed sediment samples from the study site were not different from those in the western North Pacific. This report summarises JAERI`s activities in the expedition. Final report by Japanese-Korean-Russian government and IAEA is annexed. (author)

Post-market clinical research conducted by medical device manufacturers: a cross-sectional survey.

Science.gov (United States)

Ross, Joseph S; Blount, Katrina L; Ritchie, Jessica D; Hodshon, Beth; Krumholz, Harlan M

2015-01-01

In the US, once a medical device is made available for use, several requirements have been established by the US Food and Drug Administration (FDA) to ensure ongoing post-market surveillance of device safety and effectiveness. Our objective was to determine how commonly medical device manufacturers initiate post-market clinical studies or augment FDA post-market surveillance requirements for higher-risk devices that are most often approved via the FDA's pre-market approval (PMA) pathway. We conducted a cross-sectional survey of 47 manufacturers with operations in California, Minnesota, and Massachusetts who market devices approved via the PMA pathway. Among 22 respondents (response rate =47%), nearly all self-reported conducting post-market clinical research studies, commonly between 1 and 5; only 1 respondent reported never conducting post-market clinical research studies. While manufacturers most often engaged in these studies to satisfy FDA requirements, other reasons were reported, including performance monitoring and surveillance and market acceptance initiatives. Risks of conducting and not conducting post-market clinical research studies were described through open-ended response to questions. Medical device manufacturers commonly initiate post-market clinical studies at the request of the FDA. Clinical data from these studies should be integrated into national post-market surveillance initiatives.

EMAP/NOAA 2003 SURVEY OF ECOLOGICAL CONDITIONS OF THE WESTERN U.S. CONTINENTAL SHELF, INCLUDING GULF OF FARALLONES NATIONAL MARINE SANCTUARY

Science.gov (United States)

In June of 2003 a partnership between EPA, NOAA, and the western coastal states conducted a joint survey of ecological condition of aquatic resources along the U.S. western continental shelf (30-120 m), using multiple indicators of ecological condition. The study is an element o...

Survey of Processing Methods for High Strength High Conductivity Wires for High Field Magnet Applications

Energy Technology Data Exchange (ETDEWEB)

Han, K.; Embury, J.D.

1998-10-01

This paper will deal with the basic concepts of attaining combination of high strength and high conductivity in pure materials, in-situ composites and macrocomposites. It will survey current attainments, and outline where some future developments may lie in developing wire products that are close to the theoretical strength of future magnet applications.

Survey of Processing Methods for High Strength High Conductivity Wires for High Field Magnet Applications

International Nuclear Information System (INIS)

Han, K.; Embury, J.D.

1998-01-01

This paper will deal with the basic concepts of attaining combination of high strength and high conductivity in pure materials, in-situ composites and macrocomposites. It will survey current attainments, and outline where some future developments may lie in developing wire products that are close to the theoretical strength of future magnet applications

Disassembly Properties of Cementitious Finish Joints Using an Induction Heating Method

Science.gov (United States)

Ahn, Jaecheol; Noguchi, Takafumi; Kitagaki, Ryoma

2015-01-01

Efficient maintenance and upgrading of a building during its lifecycle are difficult because a cementitious finish uses materials and parts with low disassembly properties. Additionally, the reuse and recycling processes during building demolition also present numerous problems from the perspective of environmental technology. In this study, an induction heating (IH) method was used to disassemble cementitious finish joints, which are widely used to join building members and materials. The IH rapidly and selectively heated and weakened these joints. The temperature elevation characteristics of the cementitious joint materials were measured as a function of several resistor types, including wire meshes and punching metals, which are usually used for cementitious finishing. The disassembly properties were evaluated through various tests using conductive resistors in cementitious joints such as mortar. When steel fiber, punching metal, and wire mesh were used as conductive resistors, the cementitious modifiers could be weakened within 30 s. Cementitious joints with conductive resistors also showed complete disassembly with little residual bond strength.

Development of a Survey Instrument to Measure TEFL Academics' Perceptions about, Individual and Workplace Characteristics for Conducting Research

Science.gov (United States)

Bai, Li; Hudson, Peter; Millwater, Jan; Tones, Megan

2013-01-01

A 30-item survey was devised to determine Chinese TEFL (Teaching English as a Foreign Language) academics' potential for conducting research. A five-part Likert scale was used to gather data from 182 academics on four factors: (1) perceptions on teaching-research nexus, (2) personal perspectives for conducting research, (3) predispositions for…

Family joint activities in a cross-national perspective

Directory of Open Access Journals (Sweden)

Kuntsche Emmanuel

2007-05-01

Full Text Available Abstract Background Parents and children joint activities are considered to be an important factor on healthy lifestyle development throughout adolescence. This study is a part of the Cross-National Survey on Health Behaviour in School-aged Children – World Health Organization Collaborative Study (HBSC. It aims to describe family time in joint activities and to clarify the role of social and structural family profile in a cross-national perspective. Methods The research was carried out according to the methodology of the HBSC study using the anonymous standardized questionnaire. In total, 17,761 students (8,649 boys and 9,112 girls aged 13 and 15 years from 6 European countries (Czech Republic, Finland, Greenland, Lithuania, Spain, and Ukraine were surveyed in the 2001–2002 school-year. The evaluation of joint family activity is based on 8 items: (1 watching TV or a video, (2 playing indoor games, (3 eating meals, (4 going for a walk, (5 going places, (6 visiting friends or relatives, (7 playing sports, (8 sitting and talking about things (chatting. Results Students from Spain and Ukraine reported spending the most time together with their families in almost all kinds of joint activities, whereas students from Greenland and Finland reported spending the least of this time. Boys were more likely than girls to be spending time together with family. Joint family activity goes into decline in age from 13 to 15 years. Variability of family time in a cross-national perspective was relatively small and related to children age category. Considering national, gender and age differences of studied population groups, we found that the distribution of joint family activities tends to be dispersed significantly by family structure (intact/restructured family and family wealth. Conclusion Our study compares children and parent joint activities in European countries and reveals differences and similarities in these patterns between countries. The findings

Family joint activities in a cross-national perspective.

Science.gov (United States)

Zaborskis, Apolinaras; Zemaitiene, Nida; Borup, Ina; Kuntsche, Emmanuel; Moreno, Carmen

2007-05-30

Parents and children joint activities are considered to be an important factor on healthy lifestyle development throughout adolescence. This study is a part of the Cross-National Survey on Health Behaviour in School-aged Children--World Health Organization Collaborative Study (HBSC). It aims to describe family time in joint activities and to clarify the role of social and structural family profile in a cross-national perspective. The research was carried out according to the methodology of the HBSC study using the anonymous standardized questionnaire. In total, 17,761 students (8,649 boys and 9,112 girls) aged 13 and 15 years from 6 European countries (Czech Republic, Finland, Greenland, Lithuania, Spain, and Ukraine) were surveyed in the 2001-2002 school-year. The evaluation of joint family activity is based on 8 items: (1) watching TV or a video, (2) playing indoor games, (3) eating meals, (4) going for a walk, (5) going places, (6) visiting friends or relatives, (7) playing sports, (8) sitting and talking about things (chatting). Students from Spain and Ukraine reported spending the most time together with their families in almost all kinds of joint activities, whereas students from Greenland and Finland reported spending the least of this time. Boys were more likely than girls to be spending time together with family. Joint family activity goes into decline in age from 13 to 15 years. Variability of family time in a cross-national perspective was relatively small and related to children age category. Considering national, gender and age differences of studied population groups, we found that the distribution of joint family activities tends to be dispersed significantly by family structure (intact/restructured family) and family wealth. Our study compares children and parent joint activities in European countries and reveals differences and similarities in these patterns between countries. The findings underline the role of family structure (intact

Exploring innovative ways to conduct coverage surveys for neglected tropical diseases in Malawi, Mali, and Uganda.

Science.gov (United States)

Woodhall, Dana M; Mkwanda, Square; Dembele, Massitan; Lwanga, Harriet; Drexler, Naomi; Dubray, Christine; Harris, Jennifer; Worrell, Caitlin; Mathieu, Els

2014-04-01

Currently, a 30-cluster survey to monitor drug coverage after mass drug administration for neglected tropical diseases is the most common methodology used by control programs. We investigated alternative survey methodologies that could potentially provide an estimation of drug coverage. Three alternative survey methods (market, village chief, and religious leader) were conducted and compared to the 30-cluster method in Malawi, Mali, and Uganda. In Malawi, drug coverage for the 30-cluster, market, village chief, and religious leader methods were 66.8% (95% CI 60.3-73.4), 74.3%, 76.3%, and 77.8%, respectively. In Mali, results for round 1 were 62.6% (95% CI 54.4-70.7), 56.1%, 74.8%, and 83.2%, and 57.2% (95% CI 49.0-65.4), 54.5%, 72.2%, and 73.3%, respectively, for round 2. Uganda survey results were 65.7% (59.4-72.0), 43.7%, 67.2%, and 77.6% respectively. Further research is needed to test different coverage survey methodologies to determine which survey methods are the most scientifically rigorous and resource efficient. Published by Elsevier B.V.

Aeromagnetic and aerial photographic survey in the South Shetland Islands,Antarctica, conducted by a small unmanned aerial vehicle (Ant-Plane

Directory of Open Access Journals (Sweden)

Minoru Funaki

2013-07-01

Full Text Available Two small unmanned aerial vehicles, Ant-Plane 6 and Ant-Plane 3, were assembled using parts and technologies developed for model airplanes. The aerial vehicles were scheduled to conduct aero magnetic and photographic surveys of the Brans?eld Basin, from a takeoff runway at Marsh Air?eld on the South Shetland Islands, Antarctica, during January 2011. However, the scheduled surveys were not conducted on account of poor weather. Research was later conducted on a glacier, using a takeoff runway at St. Kliment Ohridski Base, Livingston Island, during December 2011. A ?ight from St. Kliment Ohridski Base to Deception Island yielded satisfactory results; the total distance of 302.4 km was traversed in 3 h 7 min (3:07. On this ?ight, aeromagnetic and aerial photographic data were obtained from an altitude of 780 m for a 9×18 km area on the northern half of Deception Island. Aerial photographs of Deception Island and South Bay showed the distributions of glaciers and their crevasses. The Ant-Plane ?ew over the Antarctic horizon and surveyed above Deception Island. That was the successful venture of this kind, demonstrating that airborne surveys by Ant-Planes are useful for Antarctic research investigations. Airborne surveys provide a safe and economical approach to data acquisition as compared with manned aerial operations.

Patient expectations predict greater pain relief with joint arthroplasty.

Science.gov (United States)

Gandhi, Rajiv; Davey, John Roderick; Mahomed, Nizar

2009-08-01

We examined the relationship between patient expectations of total joint arthroplasty and functional outcomes. We surveyed 1799 patients undergoing primary hip or knee arthroplasty for demographic data and Western Ontario McMaster University Osteoarthritis Index scores at baseline, 3 months, and 1 year of follow-up. Patient expectations were determined with 3 survey questions. The patients with the greatest expectations of surgery were younger, male, and had a lower body mass index. Linear regression modeling showed that a greater expectation of pain relief with surgery independently predicted greater reported pain relief at 1 year of follow-up, adjusted for all relevant covariates (P relief after joint arthroplasty is an important predictor of outcomes at 1 year.

Achievement report for fiscal 1999. FS surveys to excavate international joint research seeds; 1999 nendo kokusai kyodo kenky seeds hakkutsu no tame no FS chosa seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The FS surveys to excavate international joint research seeds are intended to promote international joint researches, whereas surveys have been carried out in fiscal 1999 on eight themes covering as wide scope as new energies, resource conservation, energy conservation, environment preservation, functional materials, information communication technologies, and bio-technologies. The eight themes are: researches on energy conservation in petroleum and petrochemical industries by using advanced distillation processes (to develop an internal heat exchange type distillation column, and realize energy conservation exceeding the minimum reflux status being the limitation of conventional energy saving means), researches on treatment of hard-to-decompose chemical substances by utilizing surface reformation by means of discharge, a new process monitoring technology (process tomography), establishment of human immortalization cells due to co-manifestation of mortalin and telomerase and elucidation of their structure, a remote maintenance technology using integrated type sensors, application of new heat resistant plastics to photo and electronic materials, preparation processes of petroleum catalysts utilizing in situ XAFS, elucidation and design of the structure of the ultra-micro metal activation point in the reaction process, and surveys on necessity of developing a continuous and massive separation system of high-level energy and resource saving type using liquid-liquid distribution. (NEDO)

Joint project of the international network of agencies for health technology assessment--Part 1: Survey results on diffusion, assessment, and clinical use of positron emission tomography.

Science.gov (United States)

Hastings, John; Adams, Elizabeth J

2006-01-01

The International Network of Agencies for Health Technology Assessment (INAHTA) has been tracking activities associated with the clinical use of positron emission tomography (PET) in its members' healthcare systems since 1997 and published its first Joint Project report on PET in 1999. Part 1 of this Joint Project report presents survey results on diffusion, assessment activities, and policy for clinical use related to PET among INAHTA members since 1999. INAHTA members were surveyed in 2003-2004. Twenty-seven INAHTA agencies (69 percent response rate) from nineteen countries responded to the survey. Dedicated PET systems are the most universally installed systems to date. Mobile scanners and modified gamma cameras are used occasionally as lower cost alternatives, and interest in PET-computed tomography hybrid models is rising despite limited assessment of impact on service planning. PET was used and assessed most commonly for managing patients with cancer. All respondents reported having some form of public funding for clinical PET frequently linked to data collection for the purpose of gathering evidence to refine clinical use and guide resource allocation toward indications that maximize clinical and cost-effectiveness. The use of HTA within a continuous quality improvement framework can help optimize scarce resources for evaluation and use of high cost diagnostic technologies such as PET, particularly where potential clinical or cost-effectiveness is considerable but conclusive evidence is lacking.

The coach program - a "joint" approach to patient education and support.

Science.gov (United States)

Shaked, Yael; Dickson, Patricia; Workman, Kathy

2016-12-01

Hospital lengths of stay for orthopaedic procedures are declining internationally. Discharge home from hospital following total joint replacement surgery can be stressful due to pain and physical restrictions. Thus, many patients report experiencing increased anxiety and feeling a sudden withdrawal of support from their medical team. The Coach Program maximizes human resources and family-centred care by formally integrating an individual whom the patient identifies as their primary support into their health care team. This unique and innovative program was designed to decrease patient anxiety, increase patient confidence, enhance coping with shorter hospital lengths of stay, and smooth the discharge planning process. Anecdotal feedback from patients and staff has been overwhelmingly positive. A pilot self-reported patient survey was conducted. Future steps include distribution and analysis of a more detailed survey to a broader patient population and finding ways to address the needs of patients with limited social support. Copyright © 2016 Elsevier Inc. All rights reserved.

Evolution of the Thermal Conductivity of Sintered Silver Joints with their Porosity Predicted by the Finite Element Analysis of Real 3D Microstructures

Science.gov (United States)

Signor, L.; Kumar, P.; Tressou, B.; Nadot-Martin, C.; Miranda-Ordonez, José; Carr, J.; Joulain, K.; Milhet, X.

2018-07-01

Silver paste sintering is a very promising technology for chip bonding in future power electronics modules owing to its high melting temperature and the good electrical and thermal properties among other classic solder alloys. However, in its sintered form, these joints contain nanometric/submicrometric pores that affect their thermal performance. The present study gives insight into the relationship between the material thermal conductivity and the real three-dimensional porous structure using finite element modelling. It is shown that over a certain pore fraction threshold (˜ 13%), the pore morphology has a non-negligible influence on the thermal conductivity. Results are also compared to predictions obtained by analytical models available in the literature.

A patient's view on the location of the temporomandibular joint.

Science.gov (United States)

Koole, Paul; Zonnenberg, Adriaan J J; Mulder, Jan

2018-03-25

Objective A survey was held to establish whether laypeople knew the location of their temporomandibular joint. Methods A sample of 61 participants, visiting their dental office for a routine check-up, was given a three-question survey of whether they knew the location of their temporomandibular joint and could point to this location. Results Thirty-eight participants answered the question affirmatively. Only 13 pointed to the correct location. Of these, six participants received consultation for TMD in the past, three participants were healthcare providers, and four participants actually had knowledge of the exact location. Out of 23 participants who did not know the location, one accidently designated the correct position. Conclusion The location of the temporomandibular joint is not a well-known site for many patients. In the presence of orofacial pain, it seems advisable to let the patient designate and record the site of the pain on a drawing on the patient chart.

Web-Based Surveys: Not Your Basic Survey Anymore

Science.gov (United States)

Bertot, John Carlo

2009-01-01

Web-based surveys are not new to the library environment. Although such surveys began as extensions of print surveys, the Web-based environment offers a number of approaches to conducting a survey that the print environment cannot duplicate easily. Since 1994, the author and others have conducted national surveys of public library Internet…

Post-market clinical research conducted by medical device manufacturers: a cross-sectional survey

Directory of Open Access Journals (Sweden)

Ross JS

2015-05-01

Full Text Available Joseph S Ross, Katrina L Blount, Jessica D Ritchie, Beth Hodshon, Harlan M Krumholz Center for Outcomes Research and Evaluation, Yale-New Haven Hospital, New Haven, CT, USA Background: In the US, once a medical device is made available for use, several requirements have been established by the US Food and Drug Administration (FDA to ensure ongoing post-market surveillance of device safety and effectiveness. Our objective was to determine how commonly medical device manufacturers initiate post-market clinical studies or augment FDA post-market surveillance requirements for higher-risk devices that are most often approved via the FDA's pre-market approval (PMA pathway. Methods and results: We conducted a cross-sectional survey of 47 manufacturers with operations in California, Minnesota, and Massachusetts who market devices approved via the PMA pathway. Among 22 respondents (response rate =47%, nearly all self-reported conducting post-market clinical research studies, commonly between 1 and 5; only 1 respondent reported never conducting post-market clinical research studies. While manufacturers most often engaged in these studies to satisfy FDA requirements, other reasons were reported, including performance monitoring and surveillance and market acceptance initiatives. Risks of conducting and not conducting post-market clinical research studies were described through open-ended response to questions. Conclusion: Medical device manufacturers commonly initiate post-market clinical studies at the request of the FDA. Clinical data from these studies should be integrated into national post-market surveillance initiatives. Keywords: FDA, PMA pathway, post-market surveillance

Results of total joint arthroplasty and joint preserving surgery in younger patients evaluated by alternative outcome measures

DEFF Research Database (Denmark)

Klit, Jakob

2014-01-01

, hip OA is associated with FAI covering three fundamentally different hip deformities, including acetabular dysplasia; all hypothesized to initiates OA development. Where PAO is used worldwide as a joint-preserving procedure in acetabular dysplasia, TKA and THA are the treatment of choice of end stage......BACKGROUND: Knee and hip OA is the clinical and pathological outcome of a functional and structural failure of the joint, resulting in pain and physical dysfunction. Despite the similarity in clinical presentation the pathogenesis seems to differ. Where knee OA is associated with obesity and trauma...... information prior to PAO, TKA and THA surgery. MATERIAL AND METHODS: This PhD thesis is based on three studies. Study I is a cross-sectional survey of preserved hip joints with a mean follow-up of ten years after PAO. One hundred patients (121 PAO's) were eligible for inclusion. An inquiry to the National...

Fiscal 1997 survey report. Subtask 2 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (survey/study for the promotion of international cooperation); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 2 (kokusai kyoryoku suishin no tame no choa kento)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The survey was aimed at developing the WE-NET as a joint project worldwide by taking concrete measures such PR activities to obtain international understanding and cooperation of WE-NET based on the survey/grasp of researches of research institutes in each country and the developmental trend of hydrogen energy in each of the main countries. Implementing a `long-term vision for the WE-NET international cooperation,` the following measures were taken in fiscal 1997. PR activities were positively developed which coped with the worldwide increasing interest in WE-NET such as delivery to overseas institutions of the fiscal 1996 survey report in English summarized by NEDO and information exchanges, and participation in international conferences and presentation of the research results. From a standpoint of positively proceeding with the international technical information exchange, the following were conducted following fiscal 1996: 1) the evaluation study jointly made with Stanford University of effects of reducing air pollution by introducing hydrogen cars, 2) survey on the U.S. hydrogen project, and 3) preparation for opening of the WE-NET internet home pages. 17 figs., 18 tabs.

[Patient safety culture in hospitals: experiences in planning, organising and conducting a survey among hospital staff].

Science.gov (United States)

van Vegten, Amanda; Pfeiffer, Yvonne; Giuliani, Francesca; Manser, Tanja

2011-01-01

This article presents the first hospital-wide survey on patient safety climate, involving all staff (medical and non-medical), in the German-speaking area. Its aim is to share our experiences with planning, organising and conducting this survey. The study was performed at the university hospital in Zurich and had a response rate of 46.8% (2,897 valid questionnaires). The survey instrument ("Patientensicherheitsklimainventar") was based on the Hospital Survey on Patient Safety Culture (AHRQ). Primarily it allowed for assessing the current patient safety climate as well as identifying specific areas for improvement and creating a hospital-wide awareness and acceptance for patient safety issues and interventions (e.g., the introduction of a Critical Incident Reporting System [CIRS]). We discuss the basic principles and the feedback concept guiding the organisation of the overall project. Critical to the success of this project were the guaranteed anonymity of the respondents, adequate communication through well-established channels within the organisation and the commitment of the management across all project phases. Copyright © 2011. Published by Elsevier GmbH.

FY 1999 report on basic survey project for joint implementations, etc. Feasibility study on energy conservation at Norsi Refinery

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This project is to link in the future to COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change) joint implementations, etc. Taken up in this survey are a topping unit, vacuum distillation unit, catalytic reforming unit, and a middle cut desulfurization unit. The purpose of the refurbishment is to conserve energy. It is estimated that 48000 TOE/year of energy will be saved and that there will be a 1.2-million tons-CO2/year reduction in greenhouse gas emissions. It is predicted that an amount equivalent to 1.3% of Russia's 1997 oil consumption will be saved across Russia and that there will be a greenhouse gas reduction equivalent to 8.8% of what Japan plans to reduce. The main problem to solve before execution of this project is in the raising of funds. Although Russia hopes that Japan will invest in the project, such at the present stage will be a high-risk venture now that the Russian economic situation and the details (CO2 emission trading, etc.) of its joint implementation framework are not yet definite. The reasonable way for Japan to follow will be to support Russia as a buyer using credits with Russia acting as the principle party. (NEDO)

Space Suit Joint Torque Measurement Method Validation

Science.gov (United States)

Valish, Dana; Eversley, Karina

2012-01-01

In 2009 and early 2010, a test method was developed and performed to quantify the torque required to manipulate joints in several existing operational and prototype space suits. This was done in an effort to develop joint torque requirements appropriate for a new Constellation Program space suit system. The same test method was levied on the Constellation space suit contractors to verify that their suit design met the requirements. However, because the original test was set up and conducted by a single test operator there was some question as to whether this method was repeatable enough to be considered a standard verification method for Constellation or other future development programs. In order to validate the method itself, a representative subset of the previous test was repeated, using the same information that would be available to space suit contractors, but set up and conducted by someone not familiar with the previous test. The resultant data was compared using graphical and statistical analysis; the results indicated a significant variance in values reported for a subset of the re-tested joints. Potential variables that could have affected the data were identified and a third round of testing was conducted in an attempt to eliminate and/or quantify the effects of these variables. The results of the third test effort will be used to determine whether or not the proposed joint torque methodology can be applied to future space suit development contracts.

Conductive heat flow at the TAG Active Hydrothermal Mound: Results from 1993-1995 submersible surveys

Science.gov (United States)

Becker, K.; Von Herzen, R.; Kirklin, J.; Evans, R.; Kadko, D.; Kinoshita, M.; Matsubayashi, O.; Mills, R.; Schultz, A.; Rona, P.

We report 70 measurements of conductive heat flow at the 50-m-high, 200-m-diameter TAG active hydrothermal mound, made during submersible surveys with Alvin in 1993 and 1995 and Shinkai 6500 in 1994. The stations were all measured with 5-thermistor, 0.6- or 1-m-long Alvin heat flow probes, which are capable of determining both gradient and thermal conductivity, and were transponder-navigated to an estimated accuracy of ±5-10 m relative to the 10-m-diameter central complex of black smokers. Within 20 m of this complex, conductive heat flow values are extremely variable (0.1- > 100 W/m²), which can only be due to local spatial and possible temporal variability in the immediate vicinity of the vigorous discharge sites. A similar local variability is suggested in the “Kremlin” area of white smokers to the southeast of the black smoker complex. On the south and southeast side of the mound, there is very high heat flow (3.7- > 25 W/m²) on the sedimented terraces that slope down from the Kremlin area. Heat flow is also high (0.3-3 W/m²) in the pelagic carbonate sediments on the surrounding seafloor within a few tens of meters of the southwest, northwest, and northeast sides of the mound. On the west side of the sulfide rubble plateau that surrounds the central black smoker peak, there is a coherent belt of very low heat flow (smokers, suggestive of local, shallow recharge of bottom water. The three submersible surveys spanned nearly two years, but showed no indication of any temporal variability in conductive heat flow over this time scale, whether natural or induced by ODP drilling in 1994.

Measurement of thermal conductivity and diffusivity in situ: Literature survey and theoretical modelling of measurements

Energy Technology Data Exchange (ETDEWEB)

Kukkonen, I.; Suppala, I. [Geological Survey of Finland, Espoo (Finland)

1999-01-01

In situ measurements of thermal conductivity and diffusivity of bedrock were investigated with the aid of a literature survey and theoretical simulations of a measurement system. According to the surveyed literature, in situ methods can be divided into `active` drill hole methods, and `passive` indirect methods utilizing other drill hole measurements together with cutting samples and petrophysical relationships. The most common active drill hole method is a cylindrical heat producing probe whose temperature is registered as a function of time. The temperature response can be calculated and interpreted with the aid of analytical solutions of the cylindrical heat conduction equation, particularly the solution for an infinite perfectly conducting cylindrical probe in a homogeneous medium, and the solution for a line source of heat in a medium. Using both forward and inverse modellings, a theoretical measurement system was analysed with an aim at finding the basic parameters for construction of a practical measurement system. The results indicate that thermal conductivity can be relatively well estimated with borehole measurements, whereas thermal diffusivity is much more sensitive to various disturbing factors, such as thermal contact resistance and variations in probe parameters. In addition, the three-dimensional conduction effects were investigated to find out the magnitude of axial `leak` of heat in long-duration experiments. The radius of influence of a drill hole measurement is mainly dependent on the duration of the experiment. Assuming typical conductivity and diffusivity values of crystalline rocks, the measurement yields information within less than a metre from the drill hole, when the experiment lasts about 24 hours. We propose the following factors to be taken as basic parameters in the construction of a practical measurement system: the probe length 1.5-2 m, heating power 5-20 Wm{sup -1}, temperature recording with 5-7 sensors placed along the probe, and

Measurement of thermal conductivity and diffusivity in situ: Literature survey and theoretical modelling of measurements

International Nuclear Information System (INIS)

Kukkonen, I.; Suppala, I.

1999-01-01

In situ measurements of thermal conductivity and diffusivity of bedrock were investigated with the aid of a literature survey and theoretical simulations of a measurement system. According to the surveyed literature, in situ methods can be divided into 'active' drill hole methods, and 'passive' indirect methods utilizing other drill hole measurements together with cutting samples and petrophysical relationships. The most common active drill hole method is a cylindrical heat producing probe whose temperature is registered as a function of time. The temperature response can be calculated and interpreted with the aid of analytical solutions of the cylindrical heat conduction equation, particularly the solution for an infinite perfectly conducting cylindrical probe in a homogeneous medium, and the solution for a line source of heat in a medium. Using both forward and inverse modellings, a theoretical measurement system was analysed with an aim at finding the basic parameters for construction of a practical measurement system. The results indicate that thermal conductivity can be relatively well estimated with borehole measurements, whereas thermal diffusivity is much more sensitive to various disturbing factors, such as thermal contact resistance and variations in probe parameters. In addition, the three-dimensional conduction effects were investigated to find out the magnitude of axial 'leak' of heat in long-duration experiments. The radius of influence of a drill hole measurement is mainly dependent on the duration of the experiment. Assuming typical conductivity and diffusivity values of crystalline rocks, the measurement yields information within less than a metre from the drill hole, when the experiment lasts about 24 hours. We propose the following factors to be taken as basic parameters in the construction of a practical measurement system: the probe length 1.5-2 m, heating power 5-20 Wm -1 , temperature recording with 5-7 sensors placed along the probe, and

Fiscal 1999 research report. Basic research for promotion of joint implementation programs (Energy efficiency survey at Noboil Refinery of Ufa City); 1999 nendo Ufa shi Noboil seiyusho ni kansuru sho energy chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The aim is to explore projects that will lead to joint implementations for greenhouse gas emission reduction, and a survey was conducted at the Bashneftechim Refineries, Ufa City, Bashkir Republic, Russian Federation. A feasibility study was carried out involving energy efficiency improvement for oil refining related units such as atmospheric and vacuum distillators. In the energy efficiency survey, studies covered energy efficiency improvement in the existing equipment through the modification of the normal and vacuum distillators, visbreaker, vacuum desulfurizer for light oil, and the process heating furnace of the catalytic cracking equipment, for a reduction in fuel consumption by realizing combustion excess air ratio control; the installation of an air preheater or a waste heater boiler for the collection of heat from combustion exhaust gas; the addition of heat exchangers and the optimization of their arrangement for an increase in the amount of heat recoverable from hot oil; the replacement of obsolete instruments and controllers with state-of-the-art types for higher energy efficiency in the control of distillation tower operation, etc. It is desired that this energy saving project will be embodied for a reduction in CO2 emissions. (NEDO)

Joint attention in Down syndrome: A meta-analysis.

Science.gov (United States)

Hahn, Laura J; Loveall, Susan J; Savoy, Madison T; Neumann, Allie M; Ikuta, Toshikazu

2018-07-01

Some studies have indicated that joint attention may be a relative strength in Down syndrome (DS), but other studies have not. To conduct a meta-analysis of joint attention in DS to more conclusively determine if this is a relative strength or weakness when compared to children with typical development (TD), developmental disabilities (DD), and autism spectrum disorder (ASD). Journal articles published before September 13, 2016, were identified by using the search terms "Down syndrome" and "joint attention" or "coordinating attention". Identified studies were reviewed and coded for inclusion criteria, descriptive information, and outcome variables. Eleven studies (553 participants) met inclusion criteria. Children with DS showed similar joint attention as TD children and higher joint attention than children with DD and ASD. Meta-regression revealed a significant association between age and joint attention effect sizes in the DS vs. TD contrast. Joint attention appears to not be a weakness for children with DS, but may be commensurate with developmental level. Joint attention may be a relative strength in comparison to other skills associated with the DS behavioral phenotype. Early interventions for children with DS may benefit from leveraging joint attention skills. Copyright © 2018 Elsevier Ltd. All rights reserved.

Joint analyses of open comments and quantitative data: Added value in a job satisfaction survey of hospital professionals.

Directory of Open Access Journals (Sweden)

Ingrid Gilles

Full Text Available To obtain a comprehensive understanding of the job opinions of hospital professionals by conducting qualitative analyses of the open comments included in a job satisfaction survey and combining these results with the quantitative results.A cross-sectional survey targeting all Lausanne University Hospital professionals was performed in the fall of 2013.The survey considered ten job satisfaction dimensions (e.g. self-fulfilment, workload, management, work-related burnout, organisational commitment, intent to stay and included an open comment section. Computer-assisted qualitative analyses were conducted on these comments. Satisfaction rates on the included dimensions and professional groups were entered as predictive variables in the qualitative analyses.Of 10 838 hospital professionals, 4978 participated in the survey and 1067 provided open comments. Data from 1045 respondents with usable comments constituted the analytic sample (133 physicians, 393 nurses, 135 laboratory technicians, 247 administrative staff, including researchers, 67 logistic staff, 44 psycho-social workers, and 26 unspecified.Almost a third of the comments addressed scheduling issues, mostly related to problems and exhaustion linked to shifts, work-life balance, and difficulties with colleagues' absences and the consequences for quality of care and patient safety. The other two-thirds related to classic themes included in job satisfaction surveys. Although some comments were provided equally by all professional groups, others were group specific: work and hierarchy pressures for physicians, healthcare quality and patient safety for nurses, skill recognition for administrative staff. Overall, respondents' comments were consistent with their job satisfaction ratings.Open comment analysis provides a comprehensive understanding of hospital professionals' job experiences, allowing better consideration of quality initiatives that match the needs of professionals with reality.

Joint analyses of open comments and quantitative data: Added value in a job satisfaction survey of hospital professionals.

Science.gov (United States)

Gilles, Ingrid; Mayer, Mauro; Courvoisier, Nelly; Peytremann-Bridevaux, Isabelle

2017-01-01

To obtain a comprehensive understanding of the job opinions of hospital professionals by conducting qualitative analyses of the open comments included in a job satisfaction survey and combining these results with the quantitative results. A cross-sectional survey targeting all Lausanne University Hospital professionals was performed in the fall of 2013. The survey considered ten job satisfaction dimensions (e.g. self-fulfilment, workload, management, work-related burnout, organisational commitment, intent to stay) and included an open comment section. Computer-assisted qualitative analyses were conducted on these comments. Satisfaction rates on the included dimensions and professional groups were entered as predictive variables in the qualitative analyses. Of 10 838 hospital professionals, 4978 participated in the survey and 1067 provided open comments. Data from 1045 respondents with usable comments constituted the analytic sample (133 physicians, 393 nurses, 135 laboratory technicians, 247 administrative staff, including researchers, 67 logistic staff, 44 psycho-social workers, and 26 unspecified). Almost a third of the comments addressed scheduling issues, mostly related to problems and exhaustion linked to shifts, work-life balance, and difficulties with colleagues' absences and the consequences for quality of care and patient safety. The other two-thirds related to classic themes included in job satisfaction surveys. Although some comments were provided equally by all professional groups, others were group specific: work and hierarchy pressures for physicians, healthcare quality and patient safety for nurses, skill recognition for administrative staff. Overall, respondents' comments were consistent with their job satisfaction ratings. Open comment analysis provides a comprehensive understanding of hospital professionals' job experiences, allowing better consideration of quality initiatives that match the needs of professionals with reality.

Critical joints in large composite primary aircraft structures. Volume 1: Technical summary

Science.gov (United States)

Bunin, Bruce L.

1985-01-01

A program was conducted at Douglas Aircraft Company to develop the technology for critical joints in composite wing structure that meets all the design requirements of a 1990 commercial transport aircraft. In fulfilling this objective, analytical procedures for joint design and analysis were developed during Phase 1 of the program. Tests were conducted at the element level to supply the empirical data required for methods development. Large composite multirow joints were tested to verify the selected design concepts and for correlation with analysis predictions. The Phase 2 program included additional tests to provide joint design and analysis data, and culminated with several technology demonstration tests of a major joint area representative of a commercial transport wing. The technology demonstration program of Phase 2 is discussed. The analysis methodology development, structural test program, and correlation between test results and analytical strength predictions are reviewed.

Present status of marine environmental radioactivity survey in the sea of Japan

International Nuclear Information System (INIS)

Matsuoka, H.

1994-01-01

Science and Technology Agency has been conducting some Marine Environmental Radioactivity Surveys around Japan in cooperation with the relevant organizations (Maritime Safety Agency, Japan Meteorological Agency, Fishery Agency, National Institute of Radiological Sciences, Japan Marine Science and Technology Center, Japan Chemical Analysis Center and Marine Ecology Research Institute). Several artificial radionuclides have been detected but the main origin is supposed to be fall-out. The level trend of marine environmental radioactivity has no anomalies excepting the effect of Chernobyl Accident. The data summarized here are as follows. 1. Marine Environmental Survey of Fisheries near the Nuclear Power Stations, 2. Past Data of Marine Environmental Radioactivity around Japan (Apr. 1982 - Mar. 1991), 3. Marine Environmental Survey of the Sea of Japan (spring, 1993), 4. Marine Environmental Survey of the Sea of Japan (autumn, 1993). In addition, JAPAN-KOREA-RUSSIA JOINT EXPEDITION in the Sea of Japan will start in the middle of March. We are expecting to get valuable data through the EXPEDITION. (J.P.N.)

FY 1999 report on basic survey for promoting joint implementation, etc. Rehabilitation of Symferopol thermal power plant

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This project serves the purpose of executing COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change) joint implementations, etc. In this survey, the existing old facilities will be replaced by three one-shaft combined cycle power generation plants of 107MW. Each of the three units comprises a 70MW-class gas turbine generator, steam turbine, generator, and a exhaust heat recovery boiler, and the three units will output 321MW in total. Upon adoption of the combined cycle design, high efficiency will be attained because stream produced by utilizing exhaust gas in the heat recovery steam generator is used for driving the steam turbine. There will be a reduction of 304,800 toe/year in fuel consumption, and a 712,089 t-CO2/year reduction in greenhouse gas emissions. The result of calculation is that the plant modification will demand 224-million dollars. In view of the EIRR (economic internal rate of return) which is predicted to be 11% and of the exchange rate which is unstable, the possibility of the project to materialize as a commercial project is low. After surveying various local areas, it is concluded that most plants in Ukraine are obsolete and that the Symferopol thermal power plant should be modified or refurbished. (NEDO)

Respiratory pattern changes during costovertebral joint movement.

Science.gov (United States)

Shannon, R

1980-05-01

Experiments were conducted to determine if costovertebral joint manipulation (CVJM) could influence the respiratory pattern. Phrenic efferent activity (PA) was monitored in dogs that were anesthetized with Dial-urethane, vagotomized, paralyzed, and artificially ventilated. Ribs 6-10 (bilaterally) were cut and separated from ribs 5-11. Branches of thoracic nerves 5-11 were cut, leaving only the joint nerve supply intact. Manual joint movement in an inspiratory or expiratory direction had an inhibitory effect on PA. Sustained displacement of the ribs could inhibit PA for a duration equal to numerous respiratory cycles. CVJM in synchrony with PA resulted in an increased respiratory rate. The inspiratory inhibitory effect of joint receptor stimulation was elicited with manual chest compression in vagotomized spontaneously breathing dogs, but not with artificial lung inflation or deflation. It is concluded that the effect of CVJM on the respiratory pattern is due to stimulation of joint mechanoreceptors, and that they exert their influence in part via the medullary-pontine rhythm generator.

Efficiency of workplace surveys conducted by Finnish occupational health services.

Science.gov (United States)

Savinainen, Minna; Oksa, Panu

2011-07-01

In Finland, workplace surveys are used to identify and assess health risks and problems caused by work and make suggestions for continuous improvement of the work environment. With the aid of the workplace survey, occupational health services can be tailored to a company. The aims of this study were to determine how occupational health professionals gather data via the workplace survey and the effect survey results have on companies. A total of 259 occupational health nurses and 108 occupational health physicians responded to the questionnaire: 84.2% were women and 15.8% were men. The mean age of the respondents was 48.8 years (range, 26 to 65 years). Usually occupational health nurses and foremen and sometimes occupational health physicians and occupational safety and health representatives initiate the workplace survey. More than 90% of the surveys were followed by action proposals, and about 50% of these were implemented. The proposals implemented most often concerned personal protective equipment and less often leadership. Survey respondents should have both the opportunity and the authority to affect resources, the work environment, work arrangements, and tools. Teamwork among occupational health and safety professionals, management, and employees is vital for cost-effectively solving today's complex problems at workplaces around the globe. Copyright 2011, SLACK Incorporated.

A survey of research programs in radiation protection in Canada

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

A survey of research programs in Canada concerned with radiation protection was conducted in 1991-92 by the Joint Subcommittee on Regulatory Research (JSCRR) of the Atomic Energy Control Board (AECB) Advisory Committees on Radiological Protection and on Nuclear Safety. The purpose of this survey was to determine the current state of funding for this type of research in Canada. Funding for health-related radiation research in Canada is critical to establishing and maintaining a supply of trained professionals who can provide competent advice on health-related problems in radiation protection. The present report is an analysis of the information received in this survey. This survey concludes with the recommendation that the organization and definition of subprograms for the AECB Regulatory Research and Support Program should be completed as soon as possible. In this report the JSCRR should assist AECB staff in preparing a report in which priorities for research related to radiation protection are indicated. The sources of information noted at the end of the Discussion section of this report should be considered for this purpose. (author). 15 refs., 3 tabs.

A survey of research programs in radiation protection in Canada

International Nuclear Information System (INIS)

1995-07-01

A survey of research programs in Canada concerned with radiation protection was conducted in 1991-92 by the Joint Subcommittee on Regulatory Research (JSCRR) of the Atomic Energy Control Board (AECB) Advisory Committees on Radiological Protection and on Nuclear Safety. The purpose of this survey was to determine the current state of funding for this type of research in Canada. Funding for health-related radiation research in Canada is critical to establishing and maintaining a supply of trained professionals who can provide competent advice on health-related problems in radiation protection. The present report is an analysis of the information received in this survey. This survey concludes with the recommendation that the organization and definition of subprograms for the AECB Regulatory Research and Support Program should be completed as soon as possible. In this report the JSCRR should assist AECB staff in preparing a report in which priorities for research related to radiation protection are indicated. The sources of information noted at the end of the Discussion section of this report should be considered for this purpose. (author). 15 refs., 3 tabs

Report on survey of promotion of activities implemented jointly in China in FY 1997; 1997 nendo chosa hokokusho (Chugoku ni okeru kyodo jisshi katsudo no suishin chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Rapid economy growth has been observed in Asia including Japan. On the other hand, problems of population and environment grew even worse with the economic growth. Especially, China is the second CO2 emission country in the world. Large energy demand is still forecasted with its economic growth in the future. It is well-known that the energy consumption per unit GDP is very large. Therefore, it is very significant to promote the activities implemented jointly with China for mitigating the emission of greenhouse gases including CO2, which provides a significant meaning for solving global environmental issues as well as for improving regional environmental issues. It is necessary for the above to recognize the appropriate current situations and to promote the activities implemented jointly suitable for the country. Based on the discussions and information exchanges about environmental issues with staffs concerning environmental policies and scientists as well as the field surveys, methods for the activities implemented jointly were investigated to provide some proposals. 4 figs., 8 tabs.

The impact of joint ventures on U.S. hospitals.

Science.gov (United States)

Harrison, Jeffrey P

2006-01-01

This quantitative research study assesses the organizational characteristics, market factors, and profitability of US hospitals that operate joint ventures with other health care organizations. Data was obtained from the 2001 American Hospital Association annual survey, the Area Resource File, and the Center for Medicare and Medicaid Services Minimum Data Set. These data files provide essential information on individual acute care hospitals, the communities they serve, and the level of financial performance. Descriptive statistics were evaluated and a logistic regression model was utilized to examine hospitals operating joint ventures. The study found hospitals that operate joint ventures are located in communities with more elderly patients, lower unemployment, and lower HMO penetration. From an operating performance perspective, hospitals that operate joint ventures have a higher occupancy rate, a higher average length of stay, more clinical services, lower long-term debt, and a greater number of managed care contracts. The results also appear to indicate that joint ventures have a positive financial impact on US hospitals. The study has managerial implications supporting the use of joint ventures to improve hospital performance and policy implications on resource allocation.

Joint influence of individual choices, parenting practices, and physician advice on adolescent obesity, Nebraska, 2008.

Science.gov (United States)

Wang, Hongmei; Kim, Jungyoon; Su, Dejun; Xu, Liyan; Chen, Li-Wu; Huang, Terry T-K

2014-10-09

Reducing childhood obesity remains a public health priority given its high prevalence and its association with increased risk of adult obesity and chronic diseases. The objective of this study was to examine the joint influence of multiple risk factors on adolescent overweight status. We conducted a random-digit-dialed telephone survey of adolescents aged 12 to 19 years in fall 2008 in a Midwestern city in Nebraska. On the basis of survey data for 791 youths aged 12 to 18 years, we conducted latent class analysis to group youths by the joint occurrence of dietary behavior, physical activity, parenting practices, and physician advice. We then examined the association between the groups and overweight status by using logistic regression, controlling for age, sex, race/ethnicity, and parent and family information. Youths were clustered into 3 groups. Group I (52%) were youths with healthy dietary behavior and physical activity, less permissive parenting practices, and physician advice; Group II (30%) were youths with moderately healthy dietary behavior and physical activity, less permissive parenting practices, and no physician advice; and Group III (18%) were youths with unhealthy dietary behavior and physical activity, permissive parenting practices, and physician advice. Youths in Groups I and II were less likely to be overweight than youths in Group III. Youths with healthier behavior and less permissive parenting practices were less likely to be overweight. Study findings highlight the need to address obesity risk factors among youths with unhealthy dietary behavior, inadequate exercise, permissive parenting practices, and some physician advice. Tailored interventions should be used to target youths with different obesity risk factors.

Fiscal 1999 survey report. Basic survey project on international cooperation for energy consumption efficiency improvement (Project on cooperation for oil consumption efficiency improvement - Fiscal 1999 survey report on Indonesia); Kokusai energy shohi koritsuka nado kyoryoku kiso chosa jigyo / sekiyu shohi koritsuka kyoryoku chosa jigyo. 1999 nendo Indonesia chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The project aims to contribute to the promotion of international research cooperation ranging from the survey stage through the stages of verification study and popularization, and, for this purpose, it conducts on-site investigations for exploring needs for environmentally-friendly energy-saving technologies in developing countries where there will be massive-scale oil consumption in the future. In this report, surveys and deliberations are conducted to embody proposed measures, and findings are compiled, based on the surveys conducted in the preceding financial year relating to energy efficiency in and environmental technologies for the textile and chemical industries. Much is expected from the proposed measures as promising subjects of joint verification researches. A technology is proposed for energy saving in the textile industry of Indonesia. The technology aims to wash cloth using high-pressure water from a special nozzle, to continuously measure the level of contamination of the waste water, and to feed back the measured values to the water supply side for the automatic optimization of the amount of the washing water and for the utilization of warm waste water for the ultimate purpose of cascade-aided energy saving. As for the proposition for recovering chemicals mainly caustic soda, it achieves environmental improvement and energy saving in the chemical industry simultaneously. (NEDO)

The Text of the Agreement for conducting under the Auspices of the Agency. A Regional Joint Training and Research Programme using a Neutron Crystal Spectrometer

International Nuclear Information System (INIS)

1964-01-01

On 11 June 1964 the Board of Governors approved an Agreement for conducting, under the auspices of the Agency, a regional joint training and research programme using a neutron crystal spectrometer. The text of that Agreement is reproduced in this document for the information of all Members. The entry into force of the Agreement in accordance with Section 17 thereof, as well as later acceptances by additional Governments, will be notified to Members in addenda to this document

The Text of the Agreement for conducting under the Auspices of the Agency. A Regional Joint Training and Research Programme using a Neutron Crystal Spectrometer

Energy Technology Data Exchange (ETDEWEB)

NONE

1964-07-22

On 11 June 1964 the Board of Governors approved an Agreement for conducting, under the auspices of the Agency, a regional joint training and research programme using a neutron crystal spectrometer. The text of that Agreement is reproduced in this document for the information of all Members. The entry into force of the Agreement in accordance with Section 17 thereof, as well as later acceptances by additional Governments, will be notified to Members in addenda to this document.

FY 1999 report on basic survey project for joint implementations, etc. Feasibility study on energy conservation at Norsi Refinery

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This project is to link in the future to COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change) joint implementations, etc. Taken up in this survey are a topping unit, vacuum distillation unit, catalytic reforming unit, and a middle cut desulfurization unit. The purpose of the refurbishment is to conserve energy. It is estimated that 48000 TOE/year of energy will be saved and that there will be a 1.2-million tons-CO2/year reduction in greenhouse gas emissions. It is predicted that an amount equivalent to 1.3% of Russia's 1997 oil consumption will be saved across Russia and that there will be a greenhouse gas reduction equivalent to 8.8% of what Japan plans to reduce. The main problem to solve before execution of this project is in the raising of funds. Although Russia hopes that Japan will invest in the project, such at the present stage will be a high-risk venture now that the Russian economic situation and the details (CO2 emission trading, etc.) of its joint implementation framework are not yet definite. The reasonable way for Japan to follow will be to support Russia as a buyer using credits with Russia acting as the principle party. (NEDO)

The effective stress concept in a jointed rock mass. A literature survey

International Nuclear Information System (INIS)

Olsson, Roger

1997-04-01

The effective stress concept was defined by Terzaghi in 1923 and was introduced 1936 in a conference at Harvard University. The concept has under a long time been used in soil mechanics to analyse deformations and strength in soils. The effective stress σ' is equal to the total stress σ minus the pore pressure u (σ'=σ-u). The concepts's validity in a jointed rock mass has been investigated by few authors. A literature review of the area has examined many areas to create an overview of the use of the concept. Many rock mechanics and rock engineering books recommend that the expression introduced by Terzaghi is suitable for practical purpose in rock. Nevertheless, it is not really clear if they mean rock or rock mass. Within other areas such as porous rocks, mechanical compressive tests on rock joints and determination of the permeability, a slightly changed expression is used, which reduces the acting pore pressure (σ'=σ-α·u). The α factor can vary between 0 and 1 and is defined differently for different areas. Under assumption that the pore system of the rock mass is sufficiently interconnected, the most relevant expression for a jointed rock mass, that for low effective stresses should the Terzagi's original expression with α=1 be used. But for high normal stresses should α=0.9 be used

Joint NRC/EPA Sewage Sludge Radiological Survey: Survey Design & Test Site Results

Science.gov (United States)

This report contains the results of a radiological survey of nine publicly POTWs around the country, which was commissioned by the Sewage Sludge Subcommittee, to determine whether and to what extent radionuclides concentrate in sewage treatment wastes.

Renal studies in safety pharmacology and toxicology: A survey conducted in the top 15 pharmaceutical companies.

Science.gov (United States)

Benjamin, Amanda; Gallacher, David J; Greiter-Wilke, Andrea; Guillon, Jean-Michel; Kasai, Cheiko; Ledieu, David; Levesque, Paul; Prelle, Katja; Ratcliffe, Sian; Sannajust, Frederick; Valentin, Jean-Pierre

2015-01-01

With the recent development of more sensitive biomarkers to assess kidney injury preclinically, a survey was designed i) to investigate what strategies are used to investigate renal toxicity in both ICH S7A compliant Safety Pharmacology (SP) studies after a single dose of a compound and within repeat-dose toxicity studies by large pharmaceutical companies today; ii) to understand whether renal SP studies have impact or utility in drug development and/or if it may be more appropriate to assess renal effects after multiple doses of compounds; iii) to ascertain how much mechanistic work is performed by the top 15 largest pharmaceutical companies (as determined by R&D revenue size); iv) to gain an insight into the impact of the validation of DIKI biomarkers and their introduction in the safety evaluation paradigm; and v) to understand the impact of renal/urinary safety study data on progression of projects. Two short anonymous surveys were submitted to SP leaders of the top 15 pharmaceutical companies, as defined by 2012 R&D portfolio size. Fourteen multiple choice questions were designed to explore the strategies used to investigate renal effects in both ICH S7A compliant SP studies and within toxicology studies. A 67% and 60% response rate was obtained in the first and second surveys, respectively. Nine out of ten respondent companies conduct renal excretory measurements (eg. urine analysis) in toxicology studies whereas only five out of ten conduct specific renal SP studies; and all of those 5 also conduct the renal excretory measurements in toxicology studies. These companies measure and/or calculate a variety of parameters as part of these studies, and also on a case by case basis include regulatory qualified and non-qualified DIKI biomarkers. Finally, only one company has used renal/urinary functional data alone to stop a project, whereas the majority of respondents combine renal data with other target organ assessments to form an integrated decision-making set

Survey report for fiscal 1999. Report on basic survey on joint implementation of installing coal moisture control (CMC) facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of the COP3 joint implementation in fiscal 1999, a survey and discussions were given on installing coal moisture control (CMC) facilities in China. The possibility was discussed with the Jinan Steel Group Company and Shougang Company. The subject is a beehive coke furnace, in which coal containing 11% of water is sent to a fluidized bed dryer, and dried up to 6.6%. Stack gas in the coke furnace is used mainly as the drying heat source. The facility consists of a fluidized bed dryer, a dust collector, a coal transporter, and a stack gas recovering device. The energy saving effects made available to the above two companies are as remarkable as 19,868 tons/year and 12,189 tons/year, respectively, as converted to crude oil, and the greenhouse effect gas reduction effect as 61,476 tons/year and 37,715 tons/year, respectively. Because energy price is low in China, the investment recovery time period is set at six years or less as the limit for economic performance evaluation. As a result of the calculation, the recovery time periods for the above two companies were found to be 4.2 and 4.7 years, proving the CMC project highly promising. It is desired that the project will be moved forward once the issues of the fund raising and the discharge right of global warming gas are made clear. (NEDO)

Critical Joints in Large Composite Primary Aircraft Structures. Volume 3: Ancillary Test Results

Science.gov (United States)

Bunin, Bruce L.; Sagui, R. L.

1985-01-01

A program was conducted to develop the technology for critical structural joints for composite wing structure that meets all the design requirements of a 1990 commercial transport aircraft. The results of a comprehensive ancillary test program are summarized, consisting of single-bolt composite joint specimens tested in a variety of configurations. These tests were conducted to characterize the strength and load deflection properties that are required for multirow joint analysis. The composite material was Toray 300 fiber and Ciba-Geigy 914 resin, in the form of 0.005 and 0.01 inch thick unidirectional tape. Tests were conducted in single and double shear for loaded and unloaded hole configurations under both tensile and compressive loading. Two different layup patterns were examined. All tests were conducted at room temperature. In addition, the results of NASA Standard Toughness Test (NASA RP 1092) are reported, which were conducted for several material systems.

The Ageing Effect of Mechanical Joints on the Tyre/Joint Noises Monitored by a Control Vehicle Method without Traffic Disturbance

Directory of Open Access Journals (Sweden)

C. K. Wong

2013-01-01

Full Text Available This paper studies the ageing effect of mechanical joints reflecting from the tyre/joint impacting noise by measuring the vehicle structure-borne noise change. Field data is collected applying two measurement methods suitable for newly installed and existing old expansion joints. The measurement methodology is improved by designing and applying a trailer for equipment installation. The main advantage of this method is not to disturb existing traffic by lane closure for measurement. Field measurements were conducted regularly for a study period up to 16 months after new joint replacement to monitor the variation of the structure-borne noise change inside a test vehicle while passing through mechanical joints. Empirical relationship is developed based on the field data of the roadside airborne noise change and the vehicle structure-borne noise change. The roadside tyre/joint noises could be converted using calibrated empirical formula. Key result findings include the following. (1 The vehicle structure-borne noise change is found smallest during the 3rd–6th months even lower than that measured when a new joint is installed. The structure-borne noise change then keeps increasing afterwards till the end of the study period. (2 Similar observations are found in all study cases incorporating various mechanical joint types and test vehicle types.

Seismic response of rock joints and jointed rock mass

International Nuclear Information System (INIS)

Ghosh, A.; Hsiung, S.M.; Chowdhury, A.H.

1996-06-01

Long-term stability of emplacement drifts and potential near-field fluid flow resulting from coupled effects are among the concerns for safe disposal of high-level nuclear waste (HLW). A number of factors can induce drift instability or change the near-field flow patterns. Repetitive seismic loads from earthquakes and thermal loads generated by the decay of emplaced waste are two significant factors. One of two key technical uncertainties (KTU) that can potentially pose a high risk of noncompliance with the performance objectives of 10 CFR Part 60 is the prediction of thermal-mechanical (including repetitive seismic load) effects on stability of emplacement drifts and the engineered barrier system. The second KTU of concern is the prediction of thermal-mechanical-hydrological (including repetitive seismic load) effects on the host rock surrounding the engineered barrier system. The Rock Mechanics research project being conducted at the Center for Nuclear Waste Regulatory Analyses (CNWRA) is intended to address certain specific technical issues associated with these two KTUs. This research project has two major components: (i) seismic response of rock joints and a jointed rock mass and (ii) coupled thermal-mechanical-hydrological (TMH) response of a jointed rock mass surrounding the engineered barrier system (EBS). This final report summarizes the research activities concerned with the repetitive seismic load aspect of both these KTUs

Clinical radiation diagnostics of shoulder joint impingement syndrome

International Nuclear Information System (INIS)

Litvin, Yu.P.; Logvinenko, V.V.

2014-01-01

46 patients about an impingement are investigated by a syndrome of a humeral joint. Among them men was 28 (60,9 %) the person, women 18 (39,1 %). Middle age of the surveyed has made 52,6 ± 2,0 year. The traditional roentgenography is executed to all patients, a spiral computer tomography - 5 (10,9 %), an ultrasonography - 44 (95,7 %), a magnetic resonance imaging - 11 (23,9 %). Operative treatment is spent 16 (34,8 %) by the patient. Direct radial symptoms are what specify an impingement of a syndrome of a humeral joint in the reasons, indirect - symptoms of an inflammation both degenerate and dystrophic changes of structures of area of a humeral joint which are involved in pathological process. The best results are given by complex radial research at which it is possible to find out direct and indirect symptoms a syndrome impingement

An analysis of a joint shear model for jointed media with orthogonal joint sets

International Nuclear Information System (INIS)

Koteras, J.R.

1991-10-01

This report describes a joint shear model used in conjunction with a computational model for jointed media with orthogonal joint sets. The joint shear model allows nonlinear behavior for both joint sets. Because nonlinear behavior is allowed for both joint sets, a great many cases must be considered to fully describe the joint shear behavior of the jointed medium. An extensive set of equations is required to describe the joint shear stress and slip displacements that can occur for all the various cases. This report examines possible methods for simplifying this set of equations so that the model can be implemented efficiently form a computational standpoint. The shear model must be examined carefully to obtain a computationally efficient implementation that does not lead to numerical problems. The application to fractures in rock is discussed. 5 refs., 4 figs

Research of the Resistance of Contact Welding Joint of R65 Type Rail

Directory of Open Access Journals (Sweden)

Kęstutis Dauskurdis

2015-03-01

Full Text Available In the article the R65 type rail joints that were welded by resistance welding are analysed. Survey methodology of the research consists of the following parts: visual inspection of welded joint, ultrasonic rail inspection, hardness test of upper part of the rail, fusion area research, the measurement hardness test of heat-softened area, the measurement microhardness test, microstructure research of the welded joint, impact strength experiments, chemical analysis of welded joint, wheel-rail interaction research using the finite element method (FEM. The results of the research are analysed and the quality of weld is evaluated. The conclusion is based on the results of this research.

Trials and tribulations of conducting bio-behavioral surveys in prisons: implementation science and lessons from Ukraine.

Science.gov (United States)

Azbel, Lyuba; Grishaev, Yevgeny; Wickersham, Jeffrey A; Chernova, Olena; Dvoryak, Sergey; Polonsky, Maxim; Altice, Frederick L

2016-06-13

Purpose - Ukraine is home to Europe's worst HIV epidemic, overwhelmingly fueled by people who inject drugs who face harsh prison sentences. In Ukraine, HIV and other infectious diseases are concentrated in prisons, yet the magnitude of this problem had not been quantified. The purpose of this paper is to evaluate the systematic health survey of prisoners in the former Soviet Union (FSU). Design/methodology/approach - Qualitative interviews were carried out with research and prison administrative staff to assess the barriers and facilitators to conducting a bio-behavioral survey in Ukrainian prisons. Findings - Crucial barriers at the institutional, staff, and participant level require addressing by: first, ensuring Prison Department involvement at every stage; second, tackling pre-conceived attitudes about drug addiction and treatment among staff; and third, guaranteeing confidentiality for participants. Originality/value - The burden of many diseases is higher than expected and much higher than in the community. Notwithstanding the challenges, scientifically rigorous bio-behavioral surveys are attainable in criminal justice systems in the FSU with collaboration and careful consideration of this specific context.

The Critical Success Factors for School and Community (Joint Use) Libraries in New Zealand

Science.gov (United States)

Matthews, Vivienne Kaye D.; Calvert, Philip J.

2007-01-01

Joint use libraries in New Zealand are generally found in the form of School and Community Libraries, primarily in rural areas, but there is little information available about their effectiveness or success. Research was undertaken by surveying all identified joint use libraries in New Zealand and then following this with detailed Case Studies of…

Joint measurement of lensing–galaxy correlations using SPT and DES SV data

Energy Technology Data Exchange (ETDEWEB)

Baxter, E.; Clampitt, J.; Giannantonio, T.; Dodelson, S.; Jain, B.; Huterer, D.; Bleem, L.; Crawford, T.; Efstathiou, G.; Fosalba, P.; Kirk, D.; Kwan, J.; Sánchez, C.; Story, K.; Troxel, M. A.; Abbott, T. M. C.; Abdalla, F. B.; Armstrong, R.; Benoit-Lévy, A.; Benson, B.; Bernstein, G. M.; Bernstein, R. A.; Bertin, E.; Brooks, D.; Carlstrom, J.; Rosell, A. Carnero; Carrasco Kind, M.; Carretero, J.; Chown, R.; Crocce, M.; Cunha, C. E.; da Costa, L. N.; Desai, S.; Diehl, H. T.; Dietrich, J. P.; Doel, P.; Evrard, A. E.; Fausti Neto, A.; Flaugher, B.; Frieman, J.; Gruen, D.; Gruendl, R. A.; Gutierrez, G.; de Haan, T.; Holder, G.; Honscheid, K.; Hou, Z.; James, D. J.; Kuehn, K.; Kuropatkin, N.; Lima, M.; March, M.; Marshall, J. L.; Martini, P.; Melchior, P.; Miller, C. J.; Miquel, R.; Mohr, J. J.; Nord, B.; Omori, Y.; Plazas, A. A.; Reichardt, C.; Romer, A. K.; Rykoff, E. S.; Sanchez, E.; Sevilla-Noarbe, I.; Sheldon, E.; Smith, R. C.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Stark, A.; Swanson, M. E. C.; Tarle, G.; Thomas, D.; Walker, A. R.; Wechsler, R. H.

2016-07-04

We measure the correlation of galaxy lensing and cosmic microwave background lensing with a set of galaxies expected to trace the matter density field. The measurements are performed using pre-survey Dark Energy Survey (DES) Science Verification optical imaging data and millimetre-wave data from the 2500 sq. deg. South Pole Telescope Sunyaev–Zel'dovich (SPT-SZ) survey. The two lensing–galaxy correlations are jointly fit to extract constraints on cosmological parameters, constraints on the redshift distribution of the lens galaxies, and constraints on the absolute shear calibration of DES galaxy-lensing measurements. We show that an attractive feature of these fits is that they are fairly insensitive to the clustering bias of the galaxies used as matter tracers. The measurement presented in this work confirms that DES and SPT data are consistent with each other and with the currently favoured Λ cold dark matter cosmological model. It also demonstrates that joint lensing–galaxy correlation measurement considered here contains a wealth of information that can be extracted using current and future surveys.

17 CFR 200.40 - Joint disposition of business by Commission meeting.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Joint disposition of business... EXCHANGE COMMISSION ORGANIZATION; CONDUCT AND ETHICS; AND INFORMATION AND REQUESTS Disposition of Commission Business § 200.40 Joint disposition of business by Commission meeting. Any meeting of the...

Logistics report on a resistivity survey, conducted on behalf of Sandia Laboratories, July 14--September 4, 1978

International Nuclear Information System (INIS)

Bell, R.S.

1979-02-01

Geophysical surveys were conducted in the desert terrain on and around the Los Medanos WIPP study area east of Carlsbad, New Mexico. A total of sixteen Schlumberger vertical electrical soundings (VES) and three pole--dipole profile lines were completed. Equipment, field procedures, and field experience are reported. Uncorrected VES curves, pole--dipole apparent resistivity profiles, and field data are presented. 5 figures

Generic radiological characterization protocol for surveys conducted for DOE remedial action programs

International Nuclear Information System (INIS)

Berven, B.A.; Cottrell, W.D.; Leggett, R.W.; Little, C.A.; Myrick, T.E.; Goldsmith, W.A.; Haywood, F.F.

1986-05-01

This report describes goals and methodology that can be used by radiological survey contractors in surveys at properties associated with the Department of Energy's remedial action programs. The description includes: (1) a general discussion of the history of the remedial action programs; (2) the types of surveys that may be employed by the Radiological Survey Activities (RASA) contractor; (3) generic survey methods that may be used during radiological surveys; and (4) a format for presenting information and data in a survey report. 9 refs

Designing and conducting health surveys: a comprehensive guide

National Research Council Canada - National Science Library

Aday, Lu Ann; Cornelius, Llewellyn Joseph

2006-01-01

... and Carrying Out the Survey 311 14 Preparing the Data for Analysis 340 15 Planning and Implementing the Analysis of the Data 360 16 Writing the Research Report 391 Resource A: Personal Interview Sur...

FY 1999 report on the study of the future course, etc. of 'the basic survey for promotion of Joint Implementation, etc.'; 1999 nendo 'kyodo jisshi nado suishin kiso chosa' no kongo no hokosei nado ni kansuru kento chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The paper conducted the demonstration of the multiplier effect of 'the model project for heightening of the international energy consumption efficiency, etc.' carried out by NEDO and its subsidiary project, 'the project on the basic survey for promotion of Joint Implementation (JI),' and the comparative study between these projects and the JI/CDM projects proposed in the world. In the quantitative evaluation of the multiplier effect, in the case of making the demonstration of the same technology in the same area both in the model project and the basic survey for promotion of JI, it becomes possible to grasp the CO2 reduction effect with high accuracy, but the CO2 reducible amount is small. Inversely, as to the technology for which the basic survey for promotion of JI is studied, but the model project is not carried out, it becomes possible to grasp the CO2 reduction effect with low accuracy, the CO2 reducible amount is large. In the comparison with the JI/CDM projects proposed in the world, the CO2 reduction amount was approximately $2.7 billion, 250 million tons, in the UNFCCC project, and approximately $5.0 billion, 500 million tons, in the IJ project. There was no very big difference in the cost effect. (NEDO)

MR diagnosis of temporomandibular joint. A study of joint effusion

International Nuclear Information System (INIS)

Kaneda, Takashi; Yamashiro, Mitsuaki; Ozawa, Kaoru; Suzuki, Hiromi; Okada, Hiroyuki; Yamamoto, Hirotsugu

1998-01-01

The purposes of this study were to evaluate the relationship between correlation of MR joint effusion of the temporomandibular joint and disk position, to evaluate the relationship between joint effusion and aging, and to assess the frequency of MR joint effusion of bilateral temporomandibular joints. The temporomandibular joints of 192 patients with clinical symptoms of temporomandibular joint disorders were imaged bilaterally using high field, surface-coil MR imaging. Oblique sagittal and coronal proton density-weighted and T2-weighted images were obtained. Imaging findings of joint effusion were correlated with disk position, aging, and bilateral temporomandibular joints. MR showed effusion in 4% of the joints with normal superior disk position, 36% of the joints with disk displacement with reduction, and 45% of the joints with disk displacement without reduction. There were significant differences in the incidence of joint effusion between normal disk position and anterior disk displacement with or without reduction. Younger patients less than 40 years were significant higher the incidence of joint effusion than those of older patients. A significant association was seen between joint effusion and aging. MR showed effusion in 17% of the unilateral temporomandibular joint, 24% of the bilateral temporomandibular joints. There was no significant difference between unilateral and bilateral case. These results indicated that joint effusion using MR imaging was associated with varied temporomandibular joint pathologic states. (author)

Hydrocolonotherapy ankle joints after injuries

Directory of Open Access Journals (Sweden)

Volodymyr Muchin

2016-02-01

Full Text Available Purpose: to improve efficiency of gydrokinesitherapy by means of specially designed devices and monolasts for patients after ankle joint injuries. Material & Methods: there are pedagogical methods, clinical and radiological methods, anthropometric measurements and goniometry were used. Results: the author's technique of hydrokinesitherapy with application hydrokinesimechanotherapy device in the program of physical rehabilitation which provides optimum conditions for the recovery process was developed. Conclusions: the specially designed hydrokinesomechanotherapeutic device and monolasts are allow strictly controlled movement in all planes of the ankle joint, which contributes to the acceleration of the recovery; the conducted anthropometric and goniometric studies were indicate more rapid elimination of edema, increase movement amplitude, carries opposition to the development of contractures and muscle atrophy.

Scientific substantiation of approaches to organization and conducting radiation surveys at the rehabilitated radiation sites

Directory of Open Access Journals (Sweden)

I. K. Romanovich

2017-01-01

Full Text Available The article is concerned with the scientific justification of approaches to the organization of the final radiation survey of facilities having radioactive contamination, after their rehabilitation. Scientific publications on the previous experience in rehabilitation of facilities contaminated with radionuclides, the organization and conducting a radiation survey before the start of the decontamination, during its implementation and after its completion were analyzed. The experience in the rehabilitation of the site for the temporary storage of spent fuel and radioactive waste in Andreeva Bay in the North-West region of Russia, the locations of peaceful nuclear explosions, experimental nuclear power plants, a radiochemical laboratory, and metallurgical plants, that do not belong to radiation facilities, has been studied. It has been established that, besides the surface contamination of the soil, areas of radioactive contamination on sites of decommissioned radiation facilities with significant depth up to 15 m along the profile are available. These local zones with depth soil contamination are persistent contaminants of the groundwater. The experience in the radiation survey of the peaceful nuclear explosions sites shows the removal of radionuclides from cavities, formed with the use of nuclear explosive technologies for peaceful purposes, on the earth’s surface. An optimized list of radionuclides to be monitored during the radiological survey of rehabilitated facilities was proposed based on the analysis of the composition of radionuclides detected at radiation sites subjected to decontamination. The optimized list includes 14 radionuclides with the half-lives of more than three years. 

Report of fiscal 1999 basic survey for joint implementation, etc. Basic survey on energy conservation at Severstal Steelworks in Russian Federation

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper explains fiscal 1999 survey on energy conservation at Severstal Steelworks in Russian Federation for the purpose of materializing the COP3 joint implementation, etc. With the crude steel production capacity of about 8.8 million tons/year, this works has established a leading position in Russia as a manufacturer of flat-rolled steel products. Introduced as energy-saving measures are reduction in fuel consumption by modification of sintering machine ignition furnaces, recovery of sinter cooler waste heat for use in electricity generation, LD converter gas recovery, and installation of top pressure recovery turbines (recovering top pressure in the form of electricity). Expected energy saving effect is 969.2, 739.4, 4.18 x 10{sup 3}, and 815TJ/year for each case respectively. Expected greenhouse gas reduction effect is 54,100, 41,273, 2.3x10{sup 5}, and 44,198t-CO2/year respectively. Profitability was examined. With the total investment of 104.5 million yen, Return on investment (ROI) is each 0.33, 0.81, 1.83, and 0.86 or 4.3 in total. In conclusion, the investment recovery period was unacceptable. In order to materialize this project, a favorable financing is necessary such as yen funding by the Japanese Government. Also, on the part of the Steelworks, reduction in the equipment cost for example need to be examined. (NEDO)

New tools for evaluating LQAS survey designs

OpenAIRE

Hund, Lauren

2014-01-01

Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are pr...

The development of a graphite to copper joint for injector diagnostics

International Nuclear Information System (INIS)

Baker, D.

1975-09-01

A successful method of joining soft graphite to copper, to achieve a high thermal conductivity joint, is described, together with initial attempts and the difficulties experienced. The graphite, after an initial treatment, was flame sprayed with copper. The main copper-to-graphite joint was of silver solder. (U.K.)

Experimental and numerical study of Bondura® 6.6 PIN joints

Science.gov (United States)

Berkani, I.; Karlsen, Ø.; Lemu, H. G.

2017-12-01

Pin joints are widely used in heavy-duty machinery such as aircrafts, cranes and offshore drilling equipment to transfer multi-dimensional shear forces. Their strength and service life depend on the clamping force in the contact region that is provided by interference fits. Though the interference fits provide full contact at the pin-hole interface under pretension loads, the contact interface reduces when the pin is subjected to an external load and hence a smaller contact surface leads to dramatic increase of the contact stress. The PIN joint of Bondura® Technology, investigated in this study, is an innovative solution intended to reduce the slack at the contact surface of the pin joint of heavy-duty machinery by using tapered sleeves on each end of the PIN. The study is aimed to better understand the contact pressure build-up and stress distribution in the supporting contact surface under pre-loading of the joint and the influence of temperature difference between part assembly and operation conditions. Numerical simulation using finite element method and diverse experimental tests were conducted. The numerical simulation and the test results, particularly the tests conducted with lubricated joints, show good conformance.

APPLICATION PROSPECTS OF THREADED JOINT OF ARMATURE

Directory of Open Access Journals (Sweden)

A. V. Radkevych

2014-06-01

Full Text Available Purpose. One of the main technological operations of buildings construction on the basis of monolithic frame systems is the production of mesh reinforcement. The current interest is the new ways specification of advanced bonding armature techniques without reliability weakness and design of the building in whole, as well as the finding of use prospects of screw-threaded joint of armature as the most technological and economic method of re-bars joints. Methodology. Advantages and disadvantages analysis of existing rebar compound technologies was implemented by couplings of different types and constructions. The most promising vertical constructions for the vertical bars joints in frameworks were determined. Findings. Researches of existing technologies of rebar joints by the couplings of different construction were carried out. The installation method of mesh reinforcement of vertical structural elements with the use of the special catching devices was developed. It allows considerably accelerating installation of mesh reinforcement. Originality. Regularity of labor intensiveness change of mesh reinforcement installation of columns at armature joint in vertical position by threaded couplings with the help of catching devices using special construction was determined. This allows substantially reducing the labor expenditures during installation of these elements. Dependency of labor intensiveness and cost of lap welding armature joints, by tub-seam welding and by thread coupling depending on its diameter was designated. Regularity of labor intensiveness changes of installation at armature joints by different methods taking into account preparatory works was defined. Practical value. The analysis of mechanical armature joints techniques was conducted. It will allow selecting methods of armature joints to increase the speed of construction works more economical and effective.

Phalangeal joints kinematics during ostrich (Struthio camelus locomotion

Directory of Open Access Journals (Sweden)

Rui Zhang

2017-01-01

Full Text Available The ostrich is a highly cursorial bipedal land animal with a permanently elevated metatarsophalangeal joint supported by only two toes. Although locomotor kinematics in walking and running ostriches have been examined, these studies have been largely limited to above the metatarsophalangeal joint. In this study, kinematic data of all major toe joints were collected from gaits with double support (slow walking to running during stance period in a semi-natural setup with two selected cooperative ostriches. Statistical analyses were conducted to investigate the effect of locomotor gait on toe joint kinematics. The MTP3 and MTP4 joints exhibit the largest range of motion whereas the first phalangeal joint of the 4th toe shows the largest motion variability. The interphalangeal joints of the 3rd and 4th toes present very similar motion patterns over stance phases of slow walking and running. However, the motion patterns of the MTP3 and MTP4 joints and the vertical displacement of the metatarsophalangeal joint are significantly different during running and slow walking. Because of the biomechanical requirements, osctriches are likely to select the inverted pendulum gait at low speeds and the bouncing gait at high speeds to improve movement performance and energy economy. Interestingly, the motions of the MTP3 and MTP4 joints are highly synchronized from slow to fast locomotion. This strongly suggests that the 3rd and 4th toes really work as an “integrated system” with the 3rd toe as the main load bearing element whilst the 4th toe as the complementary load sharing element with a primary role to ensure the lateral stability of the permanently elevated metatarsophalangeal joint.

Joint tests at INL and CEA of a transient hot wire needle probe for in-pile thermal conductivity measurement

International Nuclear Information System (INIS)

Daw, J.E.; Knudson, D.L.; Villard, J.F.; Liothin, J.; Destouches, C.; Rempe, J.L.; Matheron, P.; Lambert, T.

2015-01-01

fabricated for both room temperature proof-of-concept evaluations and high temperature testing. Evaluations have been performed jointly by the INL and the French Alternative Energies and Atomic Energy Commission (CEA), both in Idaho Falls (USA) and in Cadarache (France), in the framework of a collaborative program for instrumentation of Material Testing Reactors. Initial tests were conducted on samples with a large range of thermal conductivities and temperatures ranging from 20 deg. C to 600 deg. C. Particularly, tests were recently performed on a sample having thermal conductivity and dimensions similar to UO 2 and MOX nuclear fuels, in order to validate the ability of this sensor to operate for in-pile characterization of Light Water Reactors fuels. The results of the tests already completed at INL and CEA indicate that the Transient Hot Wire Needle Probe offers an enhanced method for in-pile detection of thermal conductivity. (authors)

Joint tests at INL and CEA of a transient hot wire needle probe for in-pile thermal conductivity measurement

Energy Technology Data Exchange (ETDEWEB)

Daw, J.E.; Knudson, D.L. [Idaho National Laboratory, Idaho Falls, ID 83415, (United States); Villard, J.F.; Liothin, J.; Destouches, C. [CEA, DEN, DER, Instrumentation Sensors and Dosimetry Laboratory, Cadarache, F-13108 St Paul-Lez-Durance, (France); Rempe, J.L. [Rempe and Associates, LLC, Idaho Falls, ID, 83404 (United States); Matheron, P. [CEA, DEN, DEC, Uranium Fuels Laboratory, Cadarache, F-13108 St Paul-Lez-Durance, (France); Lambert, T. [CEA, DEN, DEC, Innovative Fuel Design and Irradiation Laboratory, Cadarache, F-13108 St Paul-Lez-Durance, (France)

2015-07-01

fabricated for both room temperature proof-of-concept evaluations and high temperature testing. Evaluations have been performed jointly by the INL and the French Alternative Energies and Atomic Energy Commission (CEA), both in Idaho Falls (USA) and in Cadarache (France), in the framework of a collaborative program for instrumentation of Material Testing Reactors. Initial tests were conducted on samples with a large range of thermal conductivities and temperatures ranging from 20 deg. C to 600 deg. C. Particularly, tests were recently performed on a sample having thermal conductivity and dimensions similar to UO{sub 2} and MOX nuclear fuels, in order to validate the ability of this sensor to operate for in-pile characterization of Light Water Reactors fuels. The results of the tests already completed at INL and CEA indicate that the Transient Hot Wire Needle Probe offers an enhanced method for in-pile detection of thermal conductivity. (authors)

A model to explain joint patterns found in ignimbrite deposits

Science.gov (United States)

Tibaldi, A.; Bonali, F. L.

2018-03-01

The study of fracture systems is of paramount importance for economic applications, such as CO2 storage in rock successions, geothermal and hydrocarbon exploration and exploitation, and also for a better knowledge of seismogenic fault formation. Understanding the origin of joints can be useful for tectonic studies and for a geotechnical characterisation of rock masses. Here, we illustrate a joint pattern discovered in ignimbrite deposits of South America, which can be confused with conjugate tectonic joint sets but which have another origin. The pattern is probably common, but recognisable only in plan view and before tectonic deformation obscures and overprints it. Key sites have been mostly studied by field surveys in Bolivia and Chile. The pattern is represented by hundreds-of-meters up to kilometre-long swarms of master joints, which show circular to semi-circular geometries and intersections that have "X" and "Y" patterns. Inside each swarm, joints are systematic, rectilinear or curvilinear in plan view, and as much as 900 m long. In section view, they are from sub-vertical to vertical and do not affect the underlying deposits. Joints with different orientation mostly interrupt each other, suggesting they have the same age. This joint architecture is here interpreted as resulting from differential contraction after emplacement of the ignimbrite deposit above a complex topography. The set of the joint pattern that has suitable orientation with respect to tectonic stresses may act to nucleate faults.

Three decades of BGR airborne geophysical surveys over the polar regions - a review

Science.gov (United States)

Damaske, Detlef

2013-04-01

The Federal Institute for Geosciences and Natural Resources (BGR) has been conducting geological polar research since 1979. A few years later BGR engaged in airborne geophysical projects. Investigation of the lithosphere of the continent and the continental margins was one of the key issues for BGR. Right from the beginning geophysical research was closely associated with the geological activities. The GANOVEX (German Antarctic North Victoria Land Expedition) program combined geological research with geophysical (mainly airborne) investigations. This proved to be a fruitful approach to many of the open questions regarding the tectonic development of the Ross Sea region. Aeromagnetic surveys evolved into a powerful tool for identifying geological structures and following them underneath the ice covered areas - not accessible to direct geological investigations. To achieve this aim it was essential to lay out these surveys with a relatively closely spaced line separation on the expense of covering large areas at the same time. Nevertheless, over many years of continues research areas of more than a just regional extent could be covered. This was, however, only possible through international collaboration. During the first years, working in the Ross Sea area, the cooperation with the US and Italian programs played a significant role, especially the GITARA (German-Italian Aeromagnetic Research in Antarctica) program has to be mentioned. GEOMAUD (Geoscientific Expedition to Dronning Maud Land) and the German-Australian joint venture PCMEGA (Prince Charles Mountains Expedition of Germany & Australia) expanded research activities to the East Antarctic shield area. In the International Polar Year (IPY), BGR played a leading role in the international project AGAP (Antarctica's GAmburtsev Province) as part of the main topic "Venture into Unknown Regions". AGAP was jointly conducted by the USA, Great Britain, Australia, China and Germany. While in the Ross Sea area even

Total joint arthroplasty: practice variation of physiotherapy across the continuum of care in Alberta

Directory of Open Access Journals (Sweden)

C. Allyson Jones

2016-11-01

Full Text Available Abstract Background Comprehensive and timely rehabilitation for total joint arthroplasty (TJA is needed to maximize recovery from this elective surgical procedure for hip and knee arthritis. Administrative data do not capture the variation of treatment for rehabilitation across the continuum of care for TJA, so we conducted a survey for physiotherapists to report practice for TJA across the continuum of care. The primary objective was to describe the reported practice of physiotherapy for TJA across the continuum of care within the context of a provincial TJA clinical pathway and highlight possible gaps in care. Method A cross-sectional on-line survey was accessible to licensed physiotherapists in Alberta, Canada for 11 weeks. Physiotherapists who treated at least five patients with TJA annually were asked to complete the survey. The survey consisted of 58 questions grouped into pre-operative, acute care and post-acute rehabilitation. Variation of practice was described in terms of number, duration and type of visits along with goals of care and program delivery methods. Results Of the 80 respondents, 26 (33 % stated they worked in small centres or rural settings in Alberta with the remaining respondents working in two large urban sites. The primary treatment goal differed for each phase across the continuum of care in that pre-operative phase was directed at improving muscle strength, functional activities were commonly reported for acute care, and post-acute phase was directed at improving joint range-of-motion. Proportionally, more physiotherapists from rural areas treated patients in out-patient hospital departments (59 %, whereas a higher proportion in urban physiotherapists saw patients in private clinics (48 %. Across the continuum of care, treatment was primarily delivered on an individual basis rather than in a group format. Conclusions Variation of practice reported with pre-and post-operative care in the community will stimulate

Total joint arthroplasty: practice variation of physiotherapy across the continuum of care in Alberta.

Science.gov (United States)

Jones, C Allyson; Martin, Ruben San; Westby, Marie D; Beaupre, Lauren A

2016-11-04

Comprehensive and timely rehabilitation for total joint arthroplasty (TJA) is needed to maximize recovery from this elective surgical procedure for hip and knee arthritis. Administrative data do not capture the variation of treatment for rehabilitation across the continuum of care for TJA, so we conducted a survey for physiotherapists to report practice for TJA across the continuum of care. The primary objective was to describe the reported practice of physiotherapy for TJA across the continuum of care within the context of a provincial TJA clinical pathway and highlight possible gaps in care. A cross-sectional on-line survey was accessible to licensed physiotherapists in Alberta, Canada for 11 weeks. Physiotherapists who treated at least five patients with TJA annually were asked to complete the survey. The survey consisted of 58 questions grouped into pre-operative, acute care and post-acute rehabilitation. Variation of practice was described in terms of number, duration and type of visits along with goals of care and program delivery methods. Of the 80 respondents, 26 (33 %) stated they worked in small centres or rural settings in Alberta with the remaining respondents working in two large urban sites. The primary treatment goal differed for each phase across the continuum of care in that pre-operative phase was directed at improving muscle strength, functional activities were commonly reported for acute care, and post-acute phase was directed at improving joint range-of-motion. Proportionally, more physiotherapists from rural areas treated patients in out-patient hospital departments (59 %), whereas a higher proportion in urban physiotherapists saw patients in private clinics (48 %). Across the continuum of care, treatment was primarily delivered on an individual basis rather than in a group format. Variation of practice reported with pre-and post-operative care in the community will stimulate dialogue within the profession as to what is the minimal

A Portrait of the Audience for Instruction in Web Searching: Results of a Survey Conducted at Two Canadian Universities.

Science.gov (United States)

Tillotson, Joy

2003-01-01

Describes a survey that was conducted involving participants in the library instruction program at two Canadian universities in order to describe the characteristics of students receiving instruction in Web searching. Examines criteria for evaluating Web sites, search strategies, use of search engines, and frequency of use. Questionnaire is…

Advanced Pavement Design: Finite Element Modeling for Rigid Pavement Joints, Report II: Model Development

National Research Council Canada - National Science Library

Hammons, Michael

1998-01-01

.... The objective of this research was to obtain data on the response of the ng'id pavement slab-joint-foundation system by conducting laboratory-scale experiments on jointed rigid pavement models...

Use of Internet panels to conduct surveys.

Science.gov (United States)

Hays, Ron D; Liu, Honghu; Kapteyn, Arie

2015-09-01

The use of Internet panels to collect survey data is increasing because it is cost-effective, enables access to large and diverse samples quickly, takes less time than traditional methods to obtain data for analysis, and the standardization of the data collection process makes studies easy to replicate. A variety of probability-based panels have been created, including Telepanel/CentERpanel, Knowledge Networks (now GFK KnowledgePanel), the American Life Panel, the Longitudinal Internet Studies for the Social Sciences panel, and the Understanding America Study panel. Despite the advantage of having a known denominator (sampling frame), the probability-based Internet panels often have low recruitment participation rates, and some have argued that there is little practical difference between opting out of a probability sample and opting into a nonprobability (convenience) Internet panel. This article provides an overview of both probability-based and convenience panels, discussing potential benefits and cautions for each method, and summarizing the approaches used to weight panel respondents in order to better represent the underlying population. Challenges of using Internet panel data are discussed, including false answers, careless responses, giving the same answer repeatedly, getting multiple surveys from the same respondent, and panelists being members of multiple panels. More is to be learned about Internet panels generally and about Web-based data collection, as well as how to evaluate data collected using mobile devices and social-media platforms.

[Attractiveness of France for international clinical research: 8th survey conducted by Leem (French association for pharmaceutical companies)].

Science.gov (United States)

Galaup, Ariane; Barthélémy, Philippe; Pouletty-Lefebvre, Brigitte; Béhier, Jehan-Michel; Zetlaoui, Jean; Borel, Thomas

2018-04-18

The Leem (French association of pharmaceutical companies) has conducted the eighth survey on attractiveness of France for clinical research. It serves to measure France's global competitiveness for international clinical trials and assess its strengths and areas of excellence. It also highlights the potential for progress and emerging trends at a time when the regulatory environment in France and Europe is undergoing change. This survey has been updated every two years since 2002 using the same methodology. It assesses the current status of research undertaken in France by the pharmaceutical industry between January 1st 2014 and December 31st 2015. Thirty companies (62% of the French market) have participated in this 8th survey which involved 3474 centers (versus 2860 in 2014) and 16,622 patients (versus 14,634 in 2014) enrolled in France across 586 clinical trials (versus 613 in 2014). This survey shows a reduction in the number of phase I and phase II trials. It also confirms that the studies conducted in France are primarily concerned with oncology (45%). Despite improvements across hospital contracts times (due to the adoption of the sole agreement) and performance indicators in trials (such as the number of patients enrolled by center), trial setup times in France are still overly lengthy (with stable times by French authorities). Ensuring that clinical research remains a priority issue for country is crucial for patients because of rapid access to innovation but also for the vitality of the French economy. Constructive dialogue with stakeholders on the subject of clinical research is essential to enhance the attractiveness of France and to improve the continuum between research, innovation and care. Copyright © 2018 Société française de pharmacologie et de thérapeutique. Published by Elsevier Masson SAS. All rights reserved.

RESULTS OF THE SURVEY CONDUCTED AMONG OPHTHALMOLOGISTS ON THE ISSUE OF EQUIPMENT OF MEDICAL INSTITUTIONS WITH OPHTHALMOLOGY DEVICES

Directory of Open Access Journals (Sweden)

S. V. Seraphimov

2017-01-01

Full Text Available Introduction. The problem of limited accessibility and quality of ophthalmic medical care remains one of the leading ones in the national healthcare. This article presents results of the survey conducted among ophthalmologists about the effect of large-scale equipment of all medical institutions in the Leningrad Region with modern ophthalmologic devices over the recent years.Objective is to determine the contribution of the health care modernization program to equipping the medical institutions of the Leningrad Region with modern ophthalmologic medical devices, and to identify the main areas for improving the ophthalmologic care for residents of the Leningrad region with cataracts.Materials and methods. According to a specially developed questionnaire, 105 ophthalmologists from the Leningrad Region were interviewed. The survey was conducted among physicians working both in out-patient medical facilities and in medical facilities with in-patient modalities.Results. The results of the study confirmed positive changes that occurred in recent years as a result of equipping medical institutions with modern medical devices. Almost two-thirds (59.9% of respondents noted that equipping with modern medical devices had a significant impact on the quality of the medical and diagnostic measures carried out in healthcare facilities of the region.Conclusions. The equipment had a significant impact on the diagnosis and treatment of all kinds of diseases of the eye and its appendages, especially such eye disease which is so common among the population of the Leningrad Region as cataracts (75.0 per 100 ophthalmologists surveyed. At the same time, in spite of these efforts, the standard for equipping ophthalmologic departments in individual medical institutions has not been fully provided. Only every fifth (20.9% ophthalmologist noted during the survey that the list of available ophthalmic devices was sufficient, and that they all worked properly.

Dark Energy Survey Year 1 Results: Methodology and Projections for Joint Analysis of Galaxy Clustering, Galaxy Lensing, and CMB Lensing Two-point Functions

Energy Technology Data Exchange (ETDEWEB)

Giannantonio, T.; et al.

2018-02-14

Optical imaging surveys measure both the galaxy density and the gravitational lensing-induced shear fields across the sky. Recently, the Dark Energy Survey (DES) collaboration used a joint fit to two-point correlations between these observables to place tight constraints on cosmology (DES Collaboration et al. 2017). In this work, we develop the methodology to extend the DES Collaboration et al. (2017) analysis to include cross-correlations of the optical survey observables with gravitational lensing of the cosmic microwave background (CMB) as measured by the South Pole Telescope (SPT) and Planck. Using simulated analyses, we show how the resulting set of five two-point functions increases the robustness of the cosmological constraints to systematic errors in galaxy lensing shear calibration. Additionally, we show that contamination of the SPT+Planck CMB lensing map by the thermal Sunyaev-Zel'dovich effect is a potentially large source of systematic error for two-point function analyses, but show that it can be reduced to acceptable levels in our analysis by masking clusters of galaxies and imposing angular scale cuts on the two-point functions. The methodology developed here will be applied to the analysis of data from the DES, the SPT, and Planck in a companion work.

Finite element model for heat conduction in jointed rock masses

International Nuclear Information System (INIS)

Gartling, D.K.; Thomas, R.K.

1981-01-01

A computatonal procedure for simulating heat conduction in a fractured rock mass is proposed and illustrated in the present paper. The method makes use of a simple local model for conduction in the vicinity of a single open fracture. The distributions of fractures and fracture properties within the finite element model are based on a statistical representation of geologic field data. Fracture behavior is included in the finite element computation by locating local, discrete fractures at the element integration points

Development of niobium alloy/stainless steel joint by friction welding, (1)

International Nuclear Information System (INIS)

Kikuchi, Taiji; Kawamura, Hiroshi.

1988-08-01

The niobium alloy and stainless steel have been jointed by the nicrobrazing method generally. However the strength of the jointed part is weaker than that of the mother material. Therefore we developed the niobium alloy(Nb-1 % Zr)/stainless steel(SUS 304) transition joint by the friction welding method. As the tests for the development. We conducted the mechanical tests (tensile test at room temperature, 300 deg C, 500 deg C and 700 deg C, torsion fatigue test and burst test), metallographical observation and electron prove X-ray microanalysis observation. Those tests proved jointed part by the friction welding had enough properties for general uses. (author)

Wide field of view CT and acromioclavicular joint instability: A technical innovation.

Science.gov (United States)

Dyer, David R; Troupis, John M; Kamali Moaveni, Afshin

2015-06-01

A 21-year-old female with a traumatic shoulder injury is investigated and managed for symptoms relating to this injury. Pathology at the acromioclavicular joint is detected clinically; however, clinical examination and multiple imaging modalities do not reach a unified diagnosis on the grading of this acromioclavicular joint injury. When management appropriate to that suggested injury grading fail to help the patient's symptoms, further investigation methods were utilised. Wide field of view, dynamic CT (4D CT) is conducted on the patient's affected shoulder using a 320 × 0.5 mm detector multislice CT. Scans were conducted with a static table as the patient completed three movements of the affected shoulder. Capturing multiple data sets per second over a z-axis of 16 cm, measurements of the acromioclavicular joint were made, to show dynamic changes at the joint. Acromioclavicular (AC) joint translations were witnessed in three planes (a previously unrecognised pathology in the grading of acromioclavicular joint injuries). Translation in multiple planes was also not evident on careful clinical examination of this patient. AC joint width, anterior-posterior translation, superior-inferior translation and coracoclavicular width were measured with planar reconstructions while volume-rendered images and dynamic sequences aiding visual understanding of the pathology. Wide field of view dynamic CT (4D CT) is an accurate and quick modality to diagnose complex acromioclavicular joint injury. It provides dynamic information that no other modality can; 4D CT shows future benefits for clinical approach to diagnosis and management of acromioclavicular joint injury, and other musculoskeletal pathologies. © 2015 The Royal Australian and New Zealand College of Radiologists.

Critical joints in large composite aircraft structure

Science.gov (United States)

Nelson, W. D.; Bunin, B. L.; Hart-Smith, L. J.

1983-01-01

A program was conducted at Douglas Aircraft Company to develop the technology for critical structural joints of composite wing structure that meets design requirements for a 1990 commercial transport aircraft. The prime objective of the program was to demonstrate the ability to reliably predict the strength of large bolted composite joints. Ancillary testing of 180 specimens generated data on strength and load-deflection characteristics which provided input to the joint analysis. Load-sharing between fasteners in multirow bolted joints was computed by the nonlinear analysis program A4EJ. This program was used to predict strengths of 20 additional large subcomponents representing strips from a wing root chordwise splice. In most cases, the predictions were accurate to within a few percent of the test results. In some cases, the observed mode of failure was different than anticipated. The highlight of the subcomponent testing was the consistent ability to achieve gross-section failure strains close to 0.005. That represents a considerable improvement over the state of the art.

Model-Based Estimation of Ankle Joint Stiffness

Directory of Open Access Journals (Sweden)

Berno J. E. Misgeld

2017-03-01

Full Text Available We address the estimation of biomechanical parameters with wearable measurement technologies. In particular, we focus on the estimation of sagittal plane ankle joint stiffness in dorsiflexion/plantar flexion. For this estimation, a novel nonlinear biomechanical model of the lower leg was formulated that is driven by electromyographic signals. The model incorporates a two-dimensional kinematic description in the sagittal plane for the calculation of muscle lever arms and torques. To reduce estimation errors due to model uncertainties, a filtering algorithm is necessary that employs segmental orientation sensor measurements. Because of the model’s inherent nonlinearities and nonsmooth dynamics, a square-root cubature Kalman filter was developed. The performance of the novel estimation approach was evaluated in silico and in an experimental procedure. The experimental study was conducted with body-worn sensors and a test-bench that was specifically designed to obtain reference angle and torque measurements for a single joint. Results show that the filter is able to reconstruct joint angle positions, velocities and torque, as well as, joint stiffness during experimental test bench movements.

Model-Based Estimation of Ankle Joint Stiffness.

Science.gov (United States)

Misgeld, Berno J E; Zhang, Tony; Lüken, Markus J; Leonhardt, Steffen

2017-03-29

We address the estimation of biomechanical parameters with wearable measurement technologies. In particular, we focus on the estimation of sagittal plane ankle joint stiffness in dorsiflexion/plantar flexion. For this estimation, a novel nonlinear biomechanical model of the lower leg was formulated that is driven by electromyographic signals. The model incorporates a two-dimensional kinematic description in the sagittal plane for the calculation of muscle lever arms and torques. To reduce estimation errors due to model uncertainties, a filtering algorithm is necessary that employs segmental orientation sensor measurements. Because of the model's inherent nonlinearities and nonsmooth dynamics, a square-root cubature Kalman filter was developed. The performance of the novel estimation approach was evaluated in silico and in an experimental procedure. The experimental study was conducted with body-worn sensors and a test-bench that was specifically designed to obtain reference angle and torque measurements for a single joint. Results show that the filter is able to reconstruct joint angle positions, velocities and torque, as well as, joint stiffness during experimental test bench movements.

Model-Based Estimation of Ankle Joint Stiffness

Science.gov (United States)

Misgeld, Berno J. E.; Zhang, Tony; Lüken, Markus J.; Leonhardt, Steffen

2017-01-01

We address the estimation of biomechanical parameters with wearable measurement technologies. In particular, we focus on the estimation of sagittal plane ankle joint stiffness in dorsiflexion/plantar flexion. For this estimation, a novel nonlinear biomechanical model of the lower leg was formulated that is driven by electromyographic signals. The model incorporates a two-dimensional kinematic description in the sagittal plane for the calculation of muscle lever arms and torques. To reduce estimation errors due to model uncertainties, a filtering algorithm is necessary that employs segmental orientation sensor measurements. Because of the model’s inherent nonlinearities and nonsmooth dynamics, a square-root cubature Kalman filter was developed. The performance of the novel estimation approach was evaluated in silico and in an experimental procedure. The experimental study was conducted with body-worn sensors and a test-bench that was specifically designed to obtain reference angle and torque measurements for a single joint. Results show that the filter is able to reconstruct joint angle positions, velocities and torque, as well as, joint stiffness during experimental test bench movements. PMID:28353683

FY1998 report on a survey related to joint utilization of welfare device development data using an international network; 1998 nendo kokusai network ni yoru fukushi kiki kaihatsu data no kyodo riyo ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

A survey was made in relation with joint utilization of welfare device development data using an international network. Developing welfare devices requires data from ergonomic and medical systems, while the cope of the objects is wide, and the kinds are various. For proliferation of welfare devices, system compatibility evaluation including that on using environment is important, including living environments that are different by countries. The present survey has identified how data for aged, handicapped and help-needing persons are accumulated and utilized in research organizations in America and Europe for both of the ergonomic and medical areas. The survey also investigated major academic societies in overseas countries, and collected database and academic network information that support the advanced research and development. At the same time, investigations were also made on organizations and corporations who are moving forward the efficient data utilization. Welfare device and service information providing systems in Japan were investigated to compare them with the trends in other countries. Conceptions and methods were compiled to utilize data internationally and jointly. Database models for device development were considered, and a proposal was made on structuring a research and development supporting database, and the operation method thereof. (NEDO)

Joint Coordination and Muscle Activities of Ballet Dancers During Tiptoe Standing.

Science.gov (United States)

Tanabe, Hiroko; Fujii, Keisuke; Kouzaki, Motoki

2017-01-01

We aimed to investigate joint coordination of lower limbs in dancers during tiptoe standing and the relationship between joint coordination and muscle coactivation. Seven female ballet dancers performed tiptoe standing with six leg positions (fi e classical dance positions and one modern dance position) for 10 s. The kinematic data of the metatarsophalangeal (MP), ankle, knee, and hip joints was collected, and surface electromyography (EMG) of over 13 lower limb muscles was conducted. Principal component analysis was performed to determine joint coordination. MP-ankle and ankle-knee had in-phase coordination, whereas knee-hip showed anti-phase coordination in the sagittal plane. In addition, most EMG-EMG coherence around the MP and ankle joints was significant up to 50 Hz when these two joints swayed with in-phase. This suggests that different joint coordination patterns are associated with neural processing related to different muscle coactivation patterns. In conclusion, ballet dancers showed in-phase coordination from the MP to knee joints, which was associated with muscle coactivation to a higher frequency domain (up to 50 Hz) in comparison with anti-phase coordination.

Alumni Perspectives Survey, 2010. Survey Report

Science.gov (United States)

Sheikh, Sabeen

2010-01-01

During the months of April and September of 2009, the Graduate Management Admission Council[R] (GMAC[R]) conducted the Alumni Perspectives Survey, a longitudinal study of prior respondents to the Global Management Education Graduate Survey of management students nearing graduation. A total of 3,708 alumni responded to the April 2009 survey,…

Joint body- and surface-wave tomography of Yucca Flat, Nevada

Science.gov (United States)

Toney, L. D.; Abbott, R. E.; Preston, L. A.

2017-12-01

In 2015, Sandia National Laboratories conducted an active-source seismic survey of Yucca Flat (YF), Nevada, on the Nevada National Security Site. YF hosted over 650 underground nuclear tests (UGTs) between 1957 and 1992. Data from this survey will help characterize the geologic structure and bulk properties of the region, informing models for the next phase of the Source Physics Experiments. The survey source was a 13,000-kg weight drop at 91 locations along a 19-km N-S transect and 56 locations along an 11-km E-W transect. Over 350 three-component 2-Hz geophones were variably spaced at 10, 20, and 100 m along each line; we used a roll-along survey geometry to ensure 10-m receiver spacing within 2 km of the source. We applied the multiple filter technique to the dataset using a comb of 30 narrow bandpass filters with center frequencies ranging from 1 to 50 Hz. After manually windowing out the fundamental Rayleigh-wave arrival, we picked group-velocity dispersion curves for 50,000 source-receiver pairs. We performed a joint inversion of group-velocity dispersion and existing body-wave travel-time picks for the shear- and compressional-wave velocity structure of YF. Our final models reveal significant Vp / Vs anomalies in the vicinities of legacy UGT sites. The velocity structures corroborate existing seismo-stratigraphic models of YF derived from borehole and gravity data. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia LLC, a wholly owned subsidiary of Honeywell International Inc. for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525.

Fiscal 2000 basic survey for coal resource exploration. Survey for development of new exploration technology (Exploration of shallow layers on the land - Collection of data and materials); 2000 nendo sekitan shigen kaihatsu kiso chosa shiryoshu. Shintansa gijutsu chosa kaihatsu (rikuiki senso tansa)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-09-01

As agreed upon between NEDO (New Energy and Industrial Technology Development Organization), Japan, and Queensland, Australia, joint research was conducted on new technology for coal exploration within Queensland, and data collected during the research and related materials are compiled into this book. The book contains the Agreement for the Joint Research of New Technology in the Geophysical Exploration of Coal Resources (Japanese and English), GPS (global positioning system) survey results along 2-dimensional seismic reflection method traverse lines, GPS survey results along 3-dimensional seismic reflection method traverse lines, seismic generator vehicle inspection and repair report, geophysical logging observer's logs and test bore dip measurement data sheets, examples of outputted shot records (2-dimensional seismic reflection method), examples of outputted shot records (3-dimensional seismic reflection method), analysis and testing report on Girrah layer samples, reference literature on PRBS (pseudorandom binary sequence), collections of photographs of cores sampled by test boring (BG001, BG002, BG003, BG004), collections of other photographs, and so forth. (NEDO)

FY 1999 report on the study of the future course, etc. of 'the basic survey for promotion of Joint Implementation, etc.'; 1999 nendo 'kyodo jisshi nado suishin kiso chosa' no kongo no hokosei nado ni kansuru kento chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The paper conducted the demonstration of the multiplier effect of 'the model project for heightening of the international energy consumption efficiency, etc.' carried out by NEDO and its subsidiary project, 'the project on the basic survey for promotion of Joint Implementation (JI),' and the comparative study between these projects and the JI/CDM projects proposed in the world. In the quantitative evaluation of the multiplier effect, in the case of making the demonstration of the same technology in the same area both in the model project and the basic survey for promotion of JI, it becomes possible to grasp the CO2 reduction effect with high accuracy, but the CO2 reducible amount is small. Inversely, as to the technology for which the basic survey for promotion of JI is studied, but the model project is not carried out, it becomes possible to grasp the CO2 reduction effect with low accuracy, the CO2 reducible amount is large. In the comparison with the JI/CDM projects proposed in the world, the CO2 reduction amount was approximately $2.7 billion, 250 million tons, in the UNFCCC project, and approximately $5.0 billion, 500 million tons, in the IJ project. There was no very big difference in the cost effect. (NEDO)

Temporomandibular joint and muscle disorder-type pain and comorbid pains in a national US sample.

Science.gov (United States)

Plesh, Octavia; Adams, Sally H; Gansky, Stuart A

2011-01-01

To compare prevalences of self-reported comorbid headache, neck, back, and joint pains in respondents with temporomandibular joint and muscle disorder (TMJMD)-type pain in the 2000-2005 US National Health Interview Survey (NHIS), and to analyze these self-reported pains by gender and age for Non-Hispanic (NH) Whites (Caucasians), Hispanics, and NH Blacks (African Americans). Data from the 2000-2005 NHIS included information on gender, age, race, ethnicity, education, different common types of pain (specifically TMJMD-type, severe headache/migraine, neck, and low back pains), changes in health status, and health care utilization. Estimates and test statistics (ie, Pearson correlations, regressions, and logistic models) were conducted using SAS survey analysis and SUDAAN software that take into account the complex sample design. A total of 189,977 people (52% female and 48% males, 73% NH Whites, 12% Hispanic, 11% NH Blacks, and 4% "Other") were included. A total of 4.6% reported TMJMD-type pain, and only 0.77% overall reported it without any comorbid headache/migraine, neck, or low back pains; also 59% of the TMJMD-type pain (n = 8,964) reported ⋝ two comorbid pains. Females reported more comorbid pain than males (odds ratio [OR] = 1.41, P neck pain, 64% low back pain, and 62% joint pain. Differences in gender and race by age patterns were detected. For females, headache/migraine pain with TMJMD-type pain peaked around age 40 and decreased thereafter regardless of race/ethnicity. Neck pain continued to increase up to about age 60, with a higher prevalence for Hispanic women at younger ages, and more pronounced in males, being the highest in the non-Whites. Low back pain was higher in Black and Hispanic females across the age span, and higher among non-White males after age 60. Joint pain demonstrated similar patterns by race/ethnicity, with higher rates for Black females, and increased with age regardless of gender. TMJMD-type pain was most often associated with

A review of methodology and analysis of nutrition and mortality surveys conducted in humanitarian emergencies from October 1993 to April 2004

Directory of Open Access Journals (Sweden)

Spiegel Paul B

2007-06-01

Full Text Available Abstract Background Malnutrition prevalence and mortality rates are increasingly used as essential indicators to assess the severity of a crisis, to follow trends, and to guide decision-making, including allocation of funds. Although consensus has slowly developed on the methodology to accurately measure these indicators, errors in the application of the survey methodology and analysis have persisted. The aim of this study was to identify common methodological weaknesses in nutrition and mortality surveys and to provide practical recommendations for improvement. Methods Nutrition (N = 368 and crude mortality rate (CMR; N = 158 surveys conducted by 33 non-governmental organisations and United Nations agencies in 17 countries from October 1993 to April 2004 were analysed for sampling validity, precision, quality of measurement and calculation according to several criteria. Results One hundred and thirty (35.3% nutrition surveys and 5 (3.2% CMR surveys met the criteria for quality. Quality of surveys varied significantly depending on the agency. The proportion of nutrition surveys that met criteria for quality rose significantly from 1993 to 2004; there was no improvement for mortality surveys during this period. Conclusion Significant errors and imprecision in the methodology and reporting of nutrition and mortality surveys were identified. While there was an improvement in the quality of nutrition surveys over the years, the quality of mortality surveys remained poor. Recent initiatives aimed at standardising nutrition and mortality survey quality should be strengthened. There are still a number of methodological issues in nutrition and mortality surveys in humanitarian emergencies that need further study.

Open / Unipede 1995 survey on uranium and enrichment requirements and supplies in Western Europe

International Nuclear Information System (INIS)

Anon.

1995-01-01

This report describes the current global situation with respect to uranium and enrichment supply and demand in Europe, as well as future prospects, based upon a survey conducted in mid-1995 by Unipede and Open among their member companies. The nuclear fuel cycle committees of Unipede and Open maintain an interest in all aspects of the nuclear fuel cycle from uranium procurement up to final disposal of radioactive waste. Regarding the front-end of the fuel cycle, the work within those committees currently concentrates of uranium and enrichment supply and demand in Europe, including the recycling of uranium and of plutonium recovered from reprocessing. For the past fifteen years, the nuclear fuel cycle committees of Unipede and Open have jointly conducted an annual survey among their members about uranium and enrichment requirements and supplies. The 1995 survey involved all nuclear electric utilities in Belgium, Finland, France, Germany, the Netherlands, Spain, Sweden, Switzerland and the United Kingdom. Exclusively electric utilities are surveyed, i.e. excluding national procurement organizations, traders, brokers, financial institutions, etc. The data obtained from the individual utilities in the same format, are aggregated and form the basis of the report. The quality of these data is guaranteed by the fact that the respondents are generally those people who are responsible for the day-to-day management of the nuclear fuel cycle in their company

Determination of Parachute Joint Factors using Seam and Joint Testing

Science.gov (United States)

Mollmann, Catherine

2015-01-01

This paper details the methodology for determining the joint factor for all parachute components. This method has been successfully implemented on the Capsule Parachute Assembly System (CPAS) for the NASA Orion crew module for use in determining the margin of safety for each component under peak loads. Also discussed are concepts behind the joint factor and what drives the loss of material strength at joints. The joint factor is defined as a "loss in joint strength...relative to the basic material strength" that occurs when "textiles are connected to each other or to metals." During the CPAS engineering development phase, a conservative joint factor of 0.80 was assumed for each parachute component. In order to refine this factor and eliminate excess conservatism, a seam and joint testing program was implemented as part of the structural validation. This method split each of the parachute structural joints into discrete tensile tests designed to duplicate the loading of each joint. Breaking strength data collected from destructive pull testing was then used to calculate the joint factor in the form of an efficiency. Joint efficiency is the percentage of the base material strength that remains after degradation due to sewing or interaction with other components; it is used interchangeably with joint factor in this paper. Parachute materials vary in type-mainly cord, tape, webbing, and cloth -which require different test fixtures and joint sample construction methods. This paper defines guidelines for designing and testing samples based on materials and test goals. Using the test methodology and analysis approach detailed in this paper, the minimum joint factor for each parachute component can be formulated. The joint factors can then be used to calculate the design factor and margin of safety for that component, a critical part of the design verification process.

Toughness study of an under matched welded joint: application to the mechanical integrity of the electron beam welded joint of 6016-T6 aluminium alloy

International Nuclear Information System (INIS)

Rekik, Wissal

2016-01-01

For the demonstration of the integrity of the most sensitive nuclear components, conventional defects, as cracks for example, must be considered within the design step as required by the nuclear safety authority. This phase is particularly crucial for dimensioning of welded structures. To ensure a conservative prediction, the position of the initial crack within the welded joint must be the most detrimental in fracture behavior. Commonly used analyzes consider homogeneous structure with the behavior of the base metal of the welded joint, considered as the weakest metallurgical zone in the case of an overmatched weld. In contrast, similar analysis is not conservative in case of under matched weld. The thesis contributes by the development of an experimental and numerical methodology allowing the identification of the detrimental metallurgical zone in fracture behavior of an under matched welded joint. The methodology proposed is applied to an electron beam welded joint on al 6061-T6. To reach this goal, the gradient of the mechanical behavior along the welded joint was first identified. This is particularly interesting to conduct an advanced analysis based on a multi material approach. In a second step, the fracture behavior of the welded joint was studied on CT specimen. The transferability of the J integral at initiation was approved on another geometry: this represents an important foundation for the transferability assumption to structure. Finally, a numerical analysis on full scale tube was developed. Residual welding stresses and structural effects were considered. The results demonstrate that the heat affected zone located at 13 mm from the middle of the welded joint is the most detrimental zone for fracture analysis. This contradicts the conventional methods conducted on fracture analysis which consider a conventional defect within the fusion zone. (author) [fr

Inter-rater reliability of diagnostic criteria for sacroiliac joint-, disc- and facet joint pain.

Science.gov (United States)

van Tilburg, Cornelis W J; Groeneweg, Johannes G; Stronks, Dirk L; Huygen, Frank J P M

2017-01-01

Several diagnostic criteria sets are described in the literature to identify low back pain subtypes, but very little is known about the inter-rater reliability of these criteria. We conducted a study to determine the reliability of diagnostic tests that point towards SI joint-, disc- or facet joint pain. Inter-rater reliability study alongside three randomized clinical trials. Multidisciplinary pain center of general hospital. Patients aged 18 or more with medical history and physical examination suggestive of sacroiliac joint-, disc- and facet joint pain on lumbar level. Making use of nowadays most common used diagnostic criteria, a physical examination is taken independently by three physicians (two pain physicians and one orthopedic surgeon). Inter-rater reliability (Kappa (κ) measure of agreement) and significance (p) between raters are presented. Strengths of agreement, indicated with κ values above 0,20, are presented in order of agreement. One hundred patients were included. None of the parameters from the physical investigation had κ values of more than 0.21 (fair) in all pairs of raters. Between two raters (C and D), there was an almost perfect agreement on three parameters, more specifically ``Abnormal sensory and motor examination, hyperactive or diminished reflexes'', ``Sitting exam shows no reflex, motor or sensory signs in the legs'' and ``Straight leg raising (Laségue) negative between 30 and 70 degrees of flexion''. The ``Drop test positive'' parameters had moderate strength of agreement between raters A and D and fair strength between raters A and B. The ``Digital interspinous pressure test positive'' had moderate strength of agreement between raters C and D and fair strength of agreement between raters A and B as well as raters B and C. Three other parameters had a fair strength of agreement between two raters, all other parameters had a slight or poor strength of agreement. Inter-rater reliability, confidence intervals and significance of

Temporomandibular joint space in children without joint disease

International Nuclear Information System (INIS)

Larheim, T.A.

1981-01-01

Bilateral assessment of the temporomandibular joint space in children without joint disease is reported. Twenty-eight children were examined with conventional radiography and 23 with tomography. High prevalence of asymmetric joint spaces with both techniques indicated that great care should be taken when using narrowing or widening of the joint space as a diagnostic criterion in children with juvenile rheumatoid arthritis. Other signs, such as restricted translation of the mandibular head, and clinical symptoms should be evaluated. (Auth.)

The environmental survey manual

International Nuclear Information System (INIS)

1987-08-01

The purpose of this manual is to provide guidance to the Survey and Sampling and Analysis teams that conduct the one-time Environmental Survey of the major US Department of Energy (DOE) operating facilities. This manual includes a discussion of DOE's policy on environmental issues, a review of statutory guidance as it applies to the Survey, the procedures and protocols to be used by the Survey teams, criteria for the use of the Survey teams in evaluating existing environmental data for the Survey effort, generic technical checklists used in every Survey, health and safety guidelines for the personnel conducting the Survey, including the identification of potential hazards, prescribed protective equipment, and emergency procedures, the required formats for the Survey reports, guidance on identifying environmental problems that need immediate attention by the Operations Office responsible for the particular facility, and procedures and protocols for the conduct of sampling and analysis

Surgeons' Perspectives on Premium Implants in Total Joint Arthroplasty.

Science.gov (United States)

Wasterlain, Amy S; Bello, Ricardo J; Vigdorchik, Jonathan; Schwarzkopf, Ran; Long, William J

2017-09-01

Declining total joint arthroplasty reimbursement and rising implant prices have led many hospitals to restrict access to newer, more expensive total joint arthroplasty implants. The authors sought to understand arthroplasty surgeons' perspectives on implants regarding innovation, product launch, costs, and cost-containment strategies including surgeon gain-sharing and patient cost-sharing. Members of the International Congress for Joint Reconstruction were surveyed regarding attitudes about implant technology and costs. Descriptive and univariate analyses were performed. A total of 126 surgeons responded from all 5 regions of the United States. Although 76.9% believed new products advance technology in orthopedics, most (66.7%) supported informing patients that new implants lack long-term clinical data and restricting new implants to a small number of investigators prior to widespread market launch. The survey revealed that 66.7% would forgo gain-sharing incentives in exchange for more freedom to choose implants. Further, 76.9% believed that patients should be allowed to pay incremental costs for "premium" implants. Surgeons who believed that premium products advance orthopedic technology were more willing to forgo gain-sharing (P=.040). Surgeons with higher surgical volume (P=.007), those who believed implant companies should be allowed to charge more for new technology (Pnew implants with patients. Many surgeons support alternative payment models permitting surgeons and patients to retain implant selection autonomy. Most respondents prioritized patient beneficence and surgeon autonomy above personal financial gain. [Orthopedics. 2017; 40(5):e825-e830.]. Copyright 2017, SLACK Incorporated.

Bio-inspired design of geometrically interlocked 3D printed joints

Science.gov (United States)

Kumar, S.; Oliva, Noel; Kumar's Lab Team

The morphology of the adhesive-adherend interface significantly affects the mechanical behavior of adhesive joints. As seen in some biocomposites like human skull, or the nacre of some bivalve molluscs' shells, a geometrically interlocking architecture of interfaces creates toughening and strengthening mechanisms enhancing the mechanical properties of the joint. In an attempt to characterize this mechanical interlocking mechanism, this study is focused on computational and experimental investigation of a single-lap joint with a very simple geometrically interlocked interface design in which both adherends have a square waveform configuration of the joining surfaces. This square waveform configuration contains a positive and a negative rectangular teeth per cycle in such a way that the joint is symmetric about the mid-bondlength. Both physical tests performed on 3D printed prototypes of joints and computational results indicate that the joints with square waveform design have higher strength and damage tolerance than those of joints with flat interface. In order to identify an optimal design configuration of this interface, a systematic parametric study is conducted by varying the geometric and material properties of the non-flat interface. This work was supported by Lockheed Martin (Award No: 12NZZ1).

High-cycle fatigue properties of small-bore socket-welded pipe joint

International Nuclear Information System (INIS)

Maekawa, Akira; Noda, Michiyasu; Suzuki, Michiaki

2009-01-01

Piping and equipment in nuclear power plants are structures including many welded joints. Reliability of welded joints is one of high-priority issues to improve the safety of nuclear power plants. However, occurrence of fatigue failures in small-bore socket-welded pipe joints by high-cycle vibrations is still reported. In this study, fatigue experiments on a socket-welded joint of austenitic stainless steel pipe was conducted under excitation conditions similar to those in actual plants to investigate vibration characteristics and fatigue strength. It was found that the natural frequency of pipe with socket-welded joint gradually decreased as fatigue damage developed, according to the Miner rule for fatigue life evaluation. The results indicate that the fatigue life of the welded pipe joint could be estimated by monitoring the decreasing ratio of the natural frequency of the pipe. The evaluation of decreasing ratio of the natural frequency in addition to fatigue damage evaluation by the Miner rule could enhance the accuracy of fatigue life evaluation. (author)

The tensile strength of mechanical joint prototype of lontar fiber composite

Science.gov (United States)

Bale, Jefri; Adoe, Dominggus G. H.; Boimau, Kristomus; Sakera, Thomas

2018-03-01

In the present study, an experimental activity has been programmed to investigate the effect of joint prototype configuration on tensile strength of lontar (Borassus Flabellifer) fiber composite. To do so, a series of tests were conducted to establish the tensile strength of different joint prototype configuration specimen of lontar fiber composite. In addition, post observation of macroscope was used to map damage behavior. The analysis of lontar fiber composite is a challenge since the material has limited information than others natural fiber composites materials. The results shown that, under static tensile loading, the tensile strength of 13 MPa produced by single lap joint of lontar fiber composite is highest compare to 11 MPa of tensile strength generated by step lap joint and double lap joint where produced the lowest tensile strength of 6 MPa. It is concluded that the differences of tensile strength depend on the geometric dimensions of the cross-sectional area and stress distribution of each joint prototype configuration.

Joint Chance-Constrained Dynamic Programming

Science.gov (United States)

Ono, Masahiro; Kuwata, Yoshiaki; Balaram, J. Bob

2012-01-01

This paper presents a novel dynamic programming algorithm with a joint chance constraint, which explicitly bounds the risk of failure in order to maintain the state within a specified feasible region. A joint chance constraint cannot be handled by existing constrained dynamic programming approaches since their application is limited to constraints in the same form as the cost function, that is, an expectation over a sum of one-stage costs. We overcome this challenge by reformulating the joint chance constraint into a constraint on an expectation over a sum of indicator functions, which can be incorporated into the cost function by dualizing the optimization problem. As a result, the primal variables can be optimized by a standard dynamic programming, while the dual variable is optimized by a root-finding algorithm that converges exponentially. Error bounds on the primal and dual objective values are rigorously derived. We demonstrate the algorithm on a path planning problem, as well as an optimal control problem for Mars entry, descent and landing. The simulations are conducted using a real terrain data of Mars, with four million discrete states at each time step.

Aerial radiological surveys of Steed Pond, Savannah River Site: Dates of surveys, 1984--1989

International Nuclear Information System (INIS)

Fritzsche, A.E.; Jobst, J.E.

1993-09-01

From June 1984 to August 1985, three aerial radiological surveys were conducted over Steed Pond at the Savannah River Site in South Carolina. In addition, Steed Pond was included in larger-area surveys of the Savannah River Site in subsequent years. The surveys were conducted by the Remote Sensing Laboratory of EG ampersand G Energy Measurements, Inc., Las Vegas, Nevada, for the US Department of Energy. Airborne measurements were obtained for both natural and man-made gamma radiation over Steed Pond and surrounding areas. The first survey was conducted when the pond was filled to normal capacity for the time of the year. On September 1, 1984, the Steed Pond dam spillway failed causing the pond to drain. The four subsequent surveys were conducted with the pond drained. The second survey and the third were conducted to study silt deposits exposed by the drop in water level after the spillway's opening. Steed Pond data from the February 1987 and April 1989 Savannah River Site surveys have been included to bring this study up to date

JET joint undertaking. Annual report 1978

International Nuclear Information System (INIS)

1979-02-01

This document is intended for information only and should not be used as a technical reference. After an introductive part on the controlled nuclear fusion research and an historical survey of the JET project, are presented: the JET joint undertaking (members of council and committee...) with its administration (finance, personnel, external relations), and the scientific and technical department with its divisions for systems (experimental, magnet, plasma, assembly, power supplies, control and data acquisition, and site and building). In appendix is described the Euratom fusion research programme

Reviving common standards in point-count surveys for broad inference across studies

Science.gov (United States)

Matsuoka, Steven M.; Mahon, C. Lisa; Handel, Colleen M.; Solymos, Peter; Bayne, Erin M.; Fontaine, Patricia C.; Ralph, C.J.

2014-01-01

We revisit the common standards recommended by Ralph et al. (1993, 1995a) for conducting point-count surveys to assess the relative abundance of landbirds breeding in North America. The standards originated from discussions among ornithologists in 1991 and were developed so that point-count survey data could be broadly compared and jointly analyzed by national data centers with the goals of monitoring populations and managing habitat. Twenty years later, we revisit these standards because (1) they have not been universally followed and (2) new methods allow estimation of absolute abundance from point counts, but these methods generally require data beyond the original standards to account for imperfect detection. Lack of standardization and the complications it introduces for analysis become apparent from aggregated data. For example, only 3% of 196,000 point counts conducted during the period 1992-2011 across Alaska and Canada followed the standards recommended for the count period and count radius. Ten-minute, unlimited-count-radius surveys increased the number of birds detected by >300% over 3-minute, 50-m-radius surveys. This effect size, which could be eliminated by standardized sampling, was ≥10 times the published effect sizes of observers, time of day, and date of the surveys. We suggest that the recommendations by Ralph et al. (1995a) continue to form the common standards when conducting point counts. This protocol is inexpensive and easy to follow but still allows the surveys to be adjusted for detection probabilities. Investigators might optionally collect additional information so that they can analyze their data with more flexible forms of removal and time-of-detection models, distance sampling, multiple-observer methods, repeated counts, or combinations of these methods. Maintaining the common standards as a base protocol, even as these study-specific modifications are added, will maximize the value of point-count data, allowing compilation and

Impact of the economic downturn on adult reconstruction surgery: a survey of the American Association of Hip and Knee Surgeons.

Science.gov (United States)

Iorio, Richard; Davis, Charles M; Healy, William L; Fehring, Thomas K; O'Connor, Mary I; York, Sally

2010-10-01

To evaluate the effects of the economic downturn on adult reconstruction surgery in the United States, a survey of the American Association of Hip and Knee Surgeons (AAHKS) membership was conducted. The survey evaluated surgical and patient volume, practice type, hospital relationship, total joint arthroplasty cost control, employee staffing, potential impact of Medicare reimbursement decreases, attitudes toward health care reform options and retirement planning. A surgical volume decrease was reported by 30.4%. An outpatient visit decrease was reported by 29.3%. A mean loss of 29.9% of retirement savings was reported. The planned retirement age increased to 65.3 years from 64.05 years. If Medicare surgeon reimbursement were to decrease up to 20%, 49% to 57% of AAHKS surgeons would be unable to provide care for Medicare patients, resulting in an unmet need of 92,650 to 160,818 total joint arthroplasty procedures among AAHKS surgeons alone. Decreases in funding for surgeons and inadequate support for subspecialty training will likely impact access and quality for Americans seeking adult reconstruction surgery. Copyright © 2010 Elsevier Inc. All rights reserved.

Multidisciplinary approach for in-deep assessment of joint prosthesis failure.

Science.gov (United States)

Tessarolo, F; Caola, I; Piccoli, F; Dorigotti, P; Demattè, E; Molinari, M; Malavolta, M; Barbareschi, M; Caciagli, P; Nollo, G

2009-01-01

In spite of advancement in biomaterials and biomechanics, in development of new osteo-integrative materials and coatings, and in macro- micro- component design, a non negligible fraction of the implanted prosthesis fails before the expected lifetime. A prospective observational clinical study has been conducted to define and apply a set of experimental techniques to in-deep assess the failure of joint prosthesis. Microbiological, histological and micro-structural techniques were implemented to specifically address phenomena occurring at the tissue-implant interface. Results obtained from 27 cases of prosthetic joint failure are discussed in terms of sensitivity and specificity. A procedural flow-chart is finally proposed for the assessment of joint prosthesis failure.

Research of alternative medicine formulary for joint pain treatment according to Food Act 1983

International Nuclear Information System (INIS)

Muhammad Ikmal Ahmad

2012-01-01

Joint is a type of tissue that connects two bones together. The main function of the joint tissues is to reduce the effect of friction that happens between bones resulting from the movement of the body. In a long term effect, the joint became dried and unable to absorb such vibration again. Thus, it will cause inflammation. A survey showed that patients with joints problems prefer the alternative prescription medicine rather than the modern medicines that are recommended by doctors. This is because it does not cost as much and it also can be easily obtained. However, the safety of consuming these products is doubtful and the side effect is unknown. This research is conducted by obtaining alternative prescription medicine for joint medication samples from Chow Kit, Kuala Lumpur area namely Jamu Jarum Emas, Maajun Kuat, Pil Tupai Jantan Asli, Kapsul Ajaib, Sendi Pil, Herba Ikan Haruan Asli, F.O.B., Tunglin Antirheumatic, and Sendi-Plus and the experiment is being tested using X-ray Fluorescence technique and referred to Akta Makanan 1983 to see whether the the medicines is safe to be consumed or not. Six heavy metal elements is stated in the act which are toxic to humans like arsenic, lead, tin, mercury, cadmium, and antimony. The amounts permitted by the act are 1, 2, 40, 0.05, 1 and 1 mg/ kg respectively. From the research, only three heavy metals have the amounts below the maximum amounts permitted by the law that is lead, cadmium, and antimony with the amount of 0.23, 0.23, and 0.04 mg/ kg while the amount of arsenic, lead, and mercury are way exceeds the law with the concentrations of 4.33 ± 0.460, 18.0 ± 1.11, and 0.120 ± 0.007 mg/ kg respectively. All samples manufacturer do not obey the law completely, thus the safety for consuming this products can cause severe effect on human health. (author)

Numerical modeling of friction welding of bi-metal joints for electrical applications

Science.gov (United States)

Velu, P. Shenbaga; Hynes, N. Rajesh Jesudoss

2018-05-01

In the manufacturing industries, and more especially in electrical engineering applications, the usage of non-ferrous materials plays a vital role. Today's engineering applications relies upon some of the significant properties such as a good corrosion resistance, mechanical properties, good heat conductivity and higher electrical conductivity. Copper-aluminum bi-metal joint is one such combination that meets the demands requirements for electrical applications. In this work, the numerical simulation of AA 6061 T6 alloy/Copper was carried out under joining conditions. By using this developed model, the temperature distribution along the length of the dissimilar joint is predicted and the time-temperature profile has also been generated. Besides, a Finite Element Model has been developed by using the numerical simulation Tool "ABAQUS". This developed FEM is helpful in predicting various output parameters during friction welding of this dissimilar joint combination.

Joint Replacement (Finger and Wrist Joints)

Science.gov (United States)

... All Topics A-Z Videos Infographics Symptom Picker Anatomy Bones Joints Muscles Nerves Vessels Tendons About Hand Surgery What is a Hand Surgeon? What is a Hand Therapist? Media Find a Hand Surgeon Home Anatomy Joint Replacement Email to a friend * required fields ...

Joint Operation Planning

National Research Council Canada - National Science Library

2006-01-01

.... It sets forth joint doctrine to govern the joint operation planning activities and performance of the Armed Forces of the United States in joint operations, and provides the joint doctrinal basis...

Jointness for the Rest of Us: Reforming Joint Professional Development

Science.gov (United States)

2016-06-10

transferred to the Joint Staff. 13 DOD’s instinct to “overly centralize planning, organization, and management.”20 The authors contend that this...2. 3 John F. Schank and others, Who is Joint? Reevaluating the Joint Duty Assignment List : A Study Prepared for the Joint Staff, by the RAND...and code those billets as such. Once identified, DOD must expand the Joint Duty Assignment List (JDAL) to include billets that offer enlisted personnel

[Sports participation after joint arthroplasty].

Science.gov (United States)

Dauty, M; Letenneur, J

2007-12-01

To recommand sports activities after joint arthroplasty from the literature analysis, the French surgeon's opinion and wish patients. From the Medline data base interrogation according to keywords: Sports, Arthroplasty, Athletics, Physical training, two different readers, an orthopedic surgeon and a Physical Medicine and Rehabilitation physician selected articles in French or English language according to the level of proofs of the french classification of the Accreditation and Health Evaluation National Agency (Anaes). Professional practices were estimated by the interrogation of 30 orthopedic surgeons members of the french West Orthopaedics Society (SOO). The demand of sports practice was studied with patients recently operated for a primary total knee arthroplasty (TKA) after gonarthrosis. Twenty-two articles were selected from 305 articles obtained by the search according to keywords. Ten literature reviews are limited by the absence of prospective randomized study. A level II study and eleven level IV articles are reported. According to the subjective orthropedic surgeon's opinion, the objective results based on the joint load studied and the percentage of arthroplasty revision, sport is beneficial for the individual health but perhaps not for the arthroplasty survey. However, aerobic and leisure activities are recommended (walking, swimming, cycling) in agreement with the demand of the patients recently operated with a TKA. TKA differs from Total Hip Arthroplasty for jogging because of knee joint constraints during the knee flexion. A single study reports sports possibilities after shoulder arthroplasty and ankle arthroplasty and no study reports results after elbow arthroplasty.

Periprosthetic joint infection: are patients with multiple prosthetic joints at risk?

Science.gov (United States)

Jafari, S Mehdi; Casper, David S; Restrepo, Camilo; Zmistowski, Benjamin; Parvizi, Javad; Sharkey, Peter F

2012-06-01

Patients who present with a periprosthetic joint infection in a single joint may have multiple prosthetic joints. The risk of these patients developing a subsequent infection in another prosthetic joint is unknown. Our purposes were (1) to identify the risk of developing a subsequent infection in another prosthetic joint and (2) to describe the time span and organism profile to the second prosthetic infection. We retrospectively identified 55 patients with periprosthetic joint infection who had another prosthetic joint in place at the time of presentation. Of the 55 patients, 11 (20%) developed a periprosthetic joint infection in a second joint. The type of organism was the same as the first infection in 4 (36%) of 11 patients. The time to developing a second infection averaged 2.0 years (range, 0-6.9 years). Copyright © 2012 Elsevier Inc. All rights reserved.

[Nationwide Survey on Informed Consent and Ethical Review at Hospitals Conducting Post-marketing Studies Sponsored by Pharmaceutical Companies].

Science.gov (United States)

Urushihara, Hisashi; Murakami, Yuka; Matsui, Kenji; Tashiro, Shimon

2018-01-01

 Under the Japanese drug regulatory system, post-marketing studies (PMS) must be in compliance with Good Post-marketing Study Practice (GPSP). The GPSP Ordinance lacks standards for the ethical conduct of PMSs; although only post-marketing clinical trials are subject to Good Clinical Practice. We conducted a web-based questionnaire survey on the ethical conduct of PMSs in collaboration with the Japanese Society of Hospital Pharmacists and pharmacists belonging to the Society. 1819 hospitals around Japan answered the questionnaire, of which 503 hospitals had conducted company-sponsored PMSs in 2015. 40.2% of the hospitals had obtained informed consent from participating patients in at least one PMS conducted in 2015, the majority of which was in written form. The first and second most frequent reasons for seeking informed consent in PMSs were to meet protocol requirements, followed by the requirement to meet institutional standard operational procedures and the request of the ethical review board of the hospital. Ethical review of PMSs was conducted in 251 hospitals. Despite a lack of standards for informed consent and ethical review in PMSs, a considerable number of study sites employed informed consent and ethical review for PMSs. While company policies and protocols are likely to be major determinants of the ethical conduct of PMSs, the governmental regulatory agency should also play a significant role in implementing a standardized ethical code for the conduct of PMSs.

Coracoclavicular joint

Energy Technology Data Exchange (ETDEWEB)

Kim, Kun Sang; Park, Chan Il; Ahn, Jae Doo; Lim, Chong Won [Seoul National University College of Medicine, Seoul (Korea, Republic of)

1970-10-15

The coracoclvicular joint, a rear abnormality which may be the cause of pain in the shoulder and limitation of motion of the shoulder joint, is discussed. A case of coracoclvicular joint with shoulder pain was observed in 65 yrs old Korean male.

Health impact assessment – A survey on quantifying tools

Energy Technology Data Exchange (ETDEWEB)

Fehr, Rainer, E-mail: rainer.fehr@uni-bielefeld.de [Fakultaet fuer Gesundheitswissenschaften, Universitaet Bielefeld, Universitaetsstr. 25, 33615 Bielefeld (Germany); Mekel, Odile C.L., E-mail: odile.mekel@lzg.nrw.de [Gesundheitsdaten und analysen, Versorgungsstrukturen, Landeszentrum Gesundheit Nordrhein-Westfalen (LZG.NRW), Westerfeldstr. 35-37, 33611 Bielefeld (Germany); Fintan Hurley, J., E-mail: fintan.hurley@iom-world.org [Institute of Occupational Medicine (IOM), Research Avenue North, Riccarton, Edinburgh EH14 4AP, Scotland (United Kingdom); Mackenbach, Johan P., E-mail: j.mackenbach@erasmusmc.nl [Department of Public Health, Erasmus MC, P.O. Box 2040, 3000 CA Rotterdam (Netherlands)

2016-02-15

Integrating human health into prospective impact assessments is known to be challenging. This is true for both approaches: dedicated health impact assessments (HIA) as well as inclusion of health into more general impact assessments. Acknowledging the full range of participatory, qualitative, and quantitative approaches, this study focuses on the latter, especially on computational tools for quantitative health modelling. We conducted a survey among tool developers concerning the status quo of development and availability of such tools; experiences made with model usage in real-life situations; and priorities for further development. Responding toolmaker groups described 17 such tools, most of them being maintained and reported as ready for use and covering a wide range of topics, including risk & protective factors, exposures, policies, and health outcomes. In recent years, existing models have been improved and were applied in new ways, and completely new models emerged. There was high agreement among respondents on the need to further develop methods for assessment of inequalities and uncertainty. The contribution of quantitative modeling to health foresight would benefit from building joint strategies of further tool development, improving the visibility of quantitative tools and methods, and engaging continuously with actual and potential users. - Highlights: • A survey investigated computational tools for health impact quantification. • Formal evaluation of such tools has been rare. • Handling inequalities and uncertainties are priority areas for further development. • Health foresight would benefit from tool developers and users forming a community. • Joint development strategies across computational tools are needed.

Health impact assessment – A survey on quantifying tools

International Nuclear Information System (INIS)

Fehr, Rainer; Mekel, Odile C.L.; Fintan Hurley, J.; Mackenbach, Johan P.

2016-01-01

Integrating human health into prospective impact assessments is known to be challenging. This is true for both approaches: dedicated health impact assessments (HIA) as well as inclusion of health into more general impact assessments. Acknowledging the full range of participatory, qualitative, and quantitative approaches, this study focuses on the latter, especially on computational tools for quantitative health modelling. We conducted a survey among tool developers concerning the status quo of development and availability of such tools; experiences made with model usage in real-life situations; and priorities for further development. Responding toolmaker groups described 17 such tools, most of them being maintained and reported as ready for use and covering a wide range of topics, including risk & protective factors, exposures, policies, and health outcomes. In recent years, existing models have been improved and were applied in new ways, and completely new models emerged. There was high agreement among respondents on the need to further develop methods for assessment of inequalities and uncertainty. The contribution of quantitative modeling to health foresight would benefit from building joint strategies of further tool development, improving the visibility of quantitative tools and methods, and engaging continuously with actual and potential users. - Highlights: • A survey investigated computational tools for health impact quantification. • Formal evaluation of such tools has been rare. • Handling inequalities and uncertainties are priority areas for further development. • Health foresight would benefit from tool developers and users forming a community. • Joint development strategies across computational tools are needed.

Residential Energy Consumption Survey: Quality Profile

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The Residential Energy Consumption Survey (RECS) is a periodic national survey that provides timely information about energy consumption and expenditures of U.S. households and about energy-related characteristics of housing units. The survey was first conducted in 1978 as the National Interim Energy Consumption Survey (NIECS), and the 1979 survey was called the Household Screener Survey. From 1980 through 1982 RECS was conducted annually. The next RECS was fielded in 1984, and since then, the survey has been undertaken at 3-year intervals. The most recent RECS was conducted in 1993.

Estimation of ground reaction forces and joint moments on the basis on plantar pressure insoles and wearable sensors for joint angle measurement.

Science.gov (United States)

Ostaszewski, Michal; Pauk, Jolanta

2018-05-16

Gait analysis is a useful tool medical staff use to support clinical decision making. There is still an urgent need to develop low-cost and unobtrusive mobile health monitoring systems. The goal of this study was twofold. Firstly, a wearable sensor system composed of plantar pressure insoles and wearable sensors for joint angle measurement was developed. Secondly, the accuracy of the system in the measurement of ground reaction forces and joint moments was examined. The measurements included joint angles and plantar pressure distribution. To validate the wearable sensor system and examine the effectiveness of the proposed method for gait analysis, an experimental study on ten volunteer subjects was conducted. The accuracy of measurement of ground reaction forces and joint moments was validated against the results obtained from a reference motion capture system. Ground reaction forces and joint moments measured by the wearable sensor system showed a root mean square error of 1% for min. GRF and 27.3% for knee extension moment. The correlation coefficient was over 0.9, in comparison with the stationary motion capture system. The study suggests that the wearable sensor system could be recommended both for research and clinical applications outside a typical gait laboratory.

Temporomandibular joint

International Nuclear Information System (INIS)

Westesson, P.L.; Hatala, M.; Tallents, R.H.; Katzberg, R.W.; Musgrave, M.; Levitt, S.

1990-01-01

This paper determines the frequency of MR signs of abnormal temporomandibular joints (TMJs) in asymptomatic volunteers. Forty-two volunteers with 84 clinically normal TMJs were imaged in the sagittal and coronal planes with surface coil MR imaging. Sagittal closed and open and coronal closed views were obtained bilaterally in all volunteers. The images were classified as normal (superior disk position) or abnormal (disk displacement of degenerative joint disease). Eighteen joints in 11 volunteers were abnormal; 12 had disk displacement with reduction and six had disk displacement without reduction, with associated degenerative joint disease in three of the six. Asymptomatic internal derangement and degenerative joint disease occur in about one-fourth of asymptomatic volunteers

Coupled Viscous Fluid Flow and Joint Deformation Analysis for Grout Injection in a Rock Joint

Science.gov (United States)

Kim, Hyung-Mok; Lee, Jong-Won; Yazdani, Mahmoud; Tohidi, Elham; Nejati, Hamid Reza; Park, Eui-Seob

2018-02-01

Fluid flow modeling is a major area of interest within the field of rock mechanics. The main objective of this study is to gain insight into the performance of grout injection inside jointed rock masses by numerical modeling of grout flow through a single rock joint. Grout flow has been widely simulated using non-Newtonian Bingham fluid characterized by two main parameters of dynamic viscosity and shear yield strength both of which are time dependent. The increasing value of these properties with injection time will apparently affect the parameters representing the grouting performance including grout penetration length and volumetric injection rate. In addition, through hydromechanical coupling a mutual influence between the injection pressure from the one side and the joint opening/closing behavior and the aperture profile variation on the other side is anticipated. This is capable of producing a considerable impact on grout spread within the rock joints. In this study based on the Bingham fluid model, a series of numerical analysis has been conducted using UDEC to simulate the flow of viscous grout in a single rock joint with smooth parallel surfaces. In these analyses, the time-dependent evolution of the grout fluid properties and the hydromechanical coupling have been considered to investigate their impact on grouting performance. In order to verify the validity of these simulations, the results of analyses including the grout penetration length and the injection flow rate were compared with a well-known analytical solution which is available for the simple case of constant grout properties and non-coupled hydraulic analysis. The comparison demonstrated that the grout penetration length can be overestimated when the time-dependent hardening of grout material is not considered. Moreover, due to the HM coupling, it was shown that the joint opening induced by injection pressure may have a considerable increasing impression on the values of penetration length and

Survey on the use of configuration risk and safety management tools at nuclear power plants. Final report

International Nuclear Information System (INIS)

Fleming, K.N.; Read, J.W.; Dagan, W.J.; Bidwell, D.A.

1998-09-01

In order to provide input to Electricite de France's (EDF) evaluation of the use of configuration safety and risk management tools in the French plants and to collect information to guide the EPRI efforts to provide useful tools for the EPRI member utilities and international partners, a joint effort to survey US and selected non-US nuclear power stations was conducted. This survey examined the use of various approaches, techniques, and software tools that are being used to evaluate the safety and risk aspects of plant configuration changes and configuration changes during plant outages as well as during power operation. The use of these tools has increased in recent years as a result of efforts to optimize plant maintenance programs, improve plant safety, and increase plant reliability and availability. This report provides the results of the survey of 37 organizations covering 54 nuclear plant sites and 97 reactor units

Comprehensive treatment of temporomandibular joint disorders.

Science.gov (United States)

Navrátil, Leos; Navratil, Vaclav; Hajkova, Simona; Hlinakova, Petra; Dostalova, Tatjana; Vranová, Jana

2014-01-01

Changing lifestyles, decreasing physical activity, which is increasing the number of degenerative joint diseases of various etiology, and certain dental procedures are increasing the number of patients complaining of pain in their temporomandibular joints. The aim of the study was to assess the benefits of comprehensive physiotherapy sessions in order to decrease the number of temporomandibular joint problems, thereby improving the patient's quality of life. An examination by a dentist determined each patient's treatment plan, which consisted of a medical exam, physical therapy and education. Each form of treatment was applied 10 times at intervals of 7-14 days. The main goal of the therapeutic physical education was to redress the muscle imbalance in the mandibular joint. This was achieved by restoring balance between the masticatory muscles, along with releasing the spastic shrouds found in the masticatory muscles. The aim of education was to teach the patient exercises focused on the temporomandibular joint and masticatory muscles. The intensity of the exercises and their composition were individually adjusted and adapted to their current state. Physical therapy consisted of the application of pulsed magnetic therapy, laser therapy, and non-invasive positive thermotherapy. The above procedure was conducted on a therapeutic group of 24 patients (3 men and 20 women). In the course of therapy, there were no complications, and all patients adhered to the prescribed regime. None reported any side effects. The mean treatment duration was 123 +/- 66 days. The outcome of the therapy was evaluated as described in the methodology, the degree of pain affecting the joint, and the opening ability of the mouth. In both parameters, there was a significant decline in patient pain. In a study devoted to tactics of rehabilitation treatment for temporomandibular joint disorders, the need for comprehensive long-term therapy, involving education, and learning proper chewing habits

Preliminary Design and Analysis of an In-plane PRSEUS Joint

Science.gov (United States)

Lovejoy, Andrew E.; Poplawski, Steven

2013-01-01

As part of the National Aeronautics and Space Administration's (NASA's) Environmentally Responsible Aviation (ERA) program, the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) has been designed, developed and tested. However, PRSEUS development efforts to date have only addressed joints required to transfer bending moments between PRSEUS panels. Development of in-plane joints for the PRSEUS concept is necessary to facilitate in-plane transfer of load from PRSEUS panels to an adjacent structure, such as from a wing panel into a fuselage. This paper presents preliminary design and analysis of an in-plane PRSEUS joint for connecting PRSEUS panels at the termination of the rod-stiffened stringers. Design requirements are provided, the PRSEUS blade joint concept is presented, and preliminary design changes and analyses are carried out to examine the feasibility of the proposed in-plane PRSEUS blade joint. The study conducted herein focuses mainly on the PRSEUS structure on one side of the joint. In particular, the design requirements for the rod shear stress and bolt bearing stress are examined. A PRSEUS blade joint design was developed that demonstrates the feasibility of this in-plane PRSEUS joint concept to terminate the rod-stiffened stringers. The presented design only demonstrates feasibility, therefore, some areas of refinement are presented that would lead to a more optimum and realistic design.

Effect of Ti interlayer on the bonding quality of W and steel HIP joint

Energy Technology Data Exchange (ETDEWEB)

Wang, Ji-Chao [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Science Island Branch of Graduate School, University of Science & Technology of China, Hefei, 230031 (China); Wang, Wanjing, E-mail: wjwang@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Wei, Ran; Wang, Xingli; Sun, Zhaoxuan [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Science Island Branch of Graduate School, University of Science & Technology of China, Hefei, 230031 (China); Xie, Chunyi; Li, Qiang [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Luo, Guang-Nan [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Science Island Branch of Graduate School, University of Science & Technology of China, Hefei, 230031 (China); Hefei Center for Physical Science and Technology, Hefei, 230022 (China); Hefei Science Center of Chinese Academy of Sciences, Hefei, 230027 (China)

2017-03-15

Tungsten (W) and steel bonding is one of the key technologies for blanket First Wall (FW) manufacture in thermal fusion reactor. The W/Steel joints are prone to fail without interlayer for the different thermo physical properties. To study the effect of titanium (Ti) interlayer on the bonding quality of W and steel joints, W/Steel Hot Isostatic Pressing (HIP) experiments with Ti interlayer were conducted under 930 °C, 100 MPa for 2 h. Intermetallics caused by atom interdiffusion would affect the bonding quality of W/Ti/Steel HIP joints, the bonding quality was evaluated by microstructure analysis and mechanical tests. All the HIP joints were well bonded and results showed no intermetallics occurred between W/Ti interfaces, meanwhile multiply phases were found between Ti/Steel interfaces. Shear tests indicated when Ti thickness was 100–500 μm, the maximum shear strength of W/Ti/Steel HIP joints would be up to around 151 MPa. Charpy impact tests showed the W/Ti/Steel HIP joints all broke in a brittle manner and the maximum Charpy impact energy was ∼0.192 J. Nano-indentation tests demonstrated W/Ti interfaces could be enhanced by solid solution hardening and formation of brittle phases has conducted high hardness across the Ti/Steel interfaces.

A Euclid, LSST and WFIRST Joint Processing Study

Science.gov (United States)

Chary, Ranga-Ram; Joint Processing Working Group

2018-01-01

Euclid, LSST and WFIRST are the flagship cosmological projects of the next decade. By mapping several thousand square degrees of sky and covering the electromagnetic spectrum from the optical to the NIR with (sub-)arcsec resolution, these projects will provide exciting new constraints on the nature of dark energy and dark matter. The ultimate cosmological, astrophysical and time-domain science yield from these missions, which will detect several billions of sources, requires joint processing at the pixel-level. Three U.S. agencies (DOE, NASA and NSF) are supporting an 18-month study which aims to 1) assess the optimal techniques to combine these, and ancillary data sets at the pixel level; 2) investigate options for an interface that will enable community access to the joint data products; and 3) identify the computing and networking infrastructure to properly handle and manipulate these large datasets together. A Joint Processing Working Group (JPWG) is carrying out this study and consists of US-based members from the community and science/data processing centers of each of these projects. Coordination with European partners is envisioned in the future and European Euclid members are involved in the JPWG as observers. The JPWG will scope the effort and resources required to build up the capabilities to support scientific investigations using joint processing in time for the start of science surveys by LSST and Euclid.

76 FR 39260 - Direct Investment Surveys: Alignment of Regulations With Current Practices

Science.gov (United States)

2011-07-06

... are eliminated from the regulations are: A survey of foreign direct investment in the U.S. seafood... requirements for two surveys of new foreign direct investment in the United States. BEA suspended collection of... Enters into a Joint Venture With, a Foreign Person BE-21, Survey of Foreign Direct Investment in U.S...

76 FR 19282 - Direct Investment Surveys: Alignment of Regulations With Current Practices

Science.gov (United States)

2011-04-07

... surveys that would be eliminated from the regulations are: a survey of foreign direct investment in the U... foreign direct investment in the United States (BE-13 and BE-14). BEA suspended collection of these... a Joint Venture With, a Foreign Person BE-21, Survey of Foreign Direct Investment in U.S. Business...

The relationship between target joints and direct resource use in severe haemophilia.

Science.gov (United States)

O'Hara, Jamie; Walsh, Shaun; Camp, Charlotte; Mazza, Giuseppe; Carroll, Liz; Hoxer, Christina; Wilkinson, Lars

2018-01-16

Target joints are a common complication of severe haemophilia. While factor replacement therapy constitutes the majority of costs in haemophilia, the relationship between target joints and non drug-related direct costs (NDDCs) has not been studied. Data on haemophilia patients without inhibitors was drawn from the 'Cost of Haemophilia across Europe - a Socioeconomic Survey' (CHESS) study, a cost assessment in severe haemophilia A and B across five European countries (France, Germany, Italy, Spain, and the United Kingdom) in which 139 haemophilia specialists provided demographic and clinical information for 1285 adult patients. NDDCs were calculated using publicly available cost data, including 12-month ambulatory and secondary care activity: haematologist and other specialist consultant consultations, medical tests and examinations, bleed-related hospital admissions, and payments to professional care providers. A generalized linear model was developed to investigate the relationship between NDDCs and target joints (areas of chronic synovitis), adjusted for patient covariates. Five hundred and thirteen patients (42% of the sample) had no diagnosed target joints; a total of 1376 target joints (range 1-10) were recorded in the remaining 714 patients. Mean adjusted NDDCs for persons with no target joints were EUR 3134 (standard error (SE) EUR 158); for persons with one or more target joints, mean adjusted NDDCs were EUR 3913 (SE EUR 157; average mean effect EUR 779; p target joints has a significant impact on NDDCs for patients with severe haemophilia, ceteris paribus. Prevention and management of target joints should be an important consideration of managing haemophilia patients.

A Study of Joint Cost Inclusion in Linear Programming Optimization

Directory of Open Access Journals (Sweden)

P. Armaos

2013-08-01

Full Text Available The concept of Structural Optimization has been a topic or research over the past century. Linear Programming Optimization has proved being the most reliable method of structural optimization. Global advances in linear programming optimization have been recently powered by University of Sheffield researchers, to include joint cost, self-weight and buckling considerations. A joint cost inclusion scopes to reduce the number of joints existing in an optimized structural solution, transforming it to a practically viable solution. The topic of the current paper is to investigate the effects of joint cost inclusion, as this is currently implemented in the optimization code. An extended literature review on this subject was conducted prior to familiarization with small scale optimization software. Using IntelliFORM software, a structured series of problems were set and analyzed. The joint cost tests examined benchmark problems and their consequent changes in the member topology, as the design domain was expanding. The findings of the analyses were remarkable and are being commented further on. The distinct topologies of solutions created by optimization processes are also recognized. Finally an alternative strategy of penalizing joints is presented.

Seismic reflection survey conducted in Benton and Grant Counties, Washington

International Nuclear Information System (INIS)

Durham, T.E.; Beggs, H.G.; Heineck, R.L.

1979-01-01

The following report is devoted to a discussion of data acquisition procedures, data processing parameters and interpretation of results for a reflection seismic survey located on the Hanford Site in Benton and Grant Countries, Washington. The Pasco basin was the geologic setting for the survey. The main objectives of the program were to determine the subsurface structural attitudes of the numerous basalt flows known to exist within the basin. The location of areas associated with possible faulting and/or fracturing was also considered of prime concern as these conditions could significantly affect the integrity of the basalt

Results of the 2008/2009 Knowledge and Opinions Surveys Conducted for the U.S. Department of Energy Hydrogen Program

Energy Technology Data Exchange (ETDEWEB)

Schmoyer, Richard L [ORNL; Truett, Lorena Faith [ORNL; Cooper, Christy [U.S. Department of Energy; Chew, Andrea [U.S. Department of Energy

2010-04-01

The U.S. Department of Energy (DOE) Fuel Cell Technologies Program (FCT) conducts comprehensive efforts to enable the widespread commercialization of fuel cells in diverse sectors of the economy - with emphasis on applications that will most effectively strengthen our nation's energy security and improve our stewardship of the environment. Expanding the use of fuel cells requires a sustained education effort to lay the foundation for future commercial market introduction. The FCT education subprogram seeks to facilitate fuel cell demonstrations and support future commercialization by providing technically accurate and objective information to key target audiences both directly and indirectly involved in the use of fuel cells today. These key target audiences include a public that is familiar and comfortable with using a new fuel, state and local government officials who understand the near-term realities and long-term potential of the technology, an educated business and industry component, and trained safety and codes officials. With this in mind, the DOE FCT program established an education key activity to address the training and informational needs of target audiences that have a role in the near-term transition and the long-term development of a hydrogen economy. Whether or not changes can be attributed to the program, designing and maintaining an effective education program entails measuring baseline awareness and periodically measuring what has been learned. The purpose of this report is to document the data and results of statistical surveys undertaken in 2008 and 2009 to measure and establish changes in understanding and awareness about hydrogen and fuel cell technologies since a baseline survey was conducted in 2004. This report is essentially a data book, a digest of the survey data and an exposition of changes in knowledge of and opinions about hydrogen and fuel cell technology since 2004. Many conclusions can be made from the survey data. However

Joint US Geological Survey, US Nuclear Regulatory Commission workshop on research related to low-level radioactive waste disposal, May 4-6, 1993, National Center, Reston, Virginia; Proceedings

Science.gov (United States)

Stevens, Peter R.; Nicholson, Thomas J.

1996-01-01

This report contains papers presented at the "Joint U.S. Geological Survey (USGS) and U.S. Nuclear Regulatory Commission (NRC) Technical Workshop on Research Related to Low-Level Radioactive Waste (LLW) Disposal" that was held at the USGS National Center Auditorium, Reston, Virginia, May 4-6, 1993. The objective of the workshop was to provide a forum for exchange of information, ideas, and technology in the geosciences dealing with LLW disposal. This workshop was the first joint activity under the Memorandum of Understanding between the USGS and NRC's Office of Nuclear Regulatory Research signed in April 1992.Participants included invited speakers from the USGS, NRC technical contractors (U.S. Department of Energy (DOE) National Laboratories and universities) and NRC staff for presentation of research study results related to LLW disposal. Also in attendance were scientists from the DOE, DOE National Laboratories, the U.S. Environmental Protection Agency, State developmental and regulatory agencies involved in LLW disposal facility siting and licensing, Atomic Energy Canada Limited (AECL), private industry, Agricultural Research Service, universities, USGS and NRC.

Experimental investigation of hardness of FSW and TIG joints of Aluminium alloys of AA7075 and AA6061

Directory of Open Access Journals (Sweden)

Chetan Patil

2016-07-01

Full Text Available This paper reports hardness testing conducted on welded butt joints by FSW and TIG welding process on similar and dissimilar aluminium alloys. FSW joints were produced for similar alloys of AA7075T651 and dissimilar alloys of AA7075T651- AA6061T6. The Friction stir welds of AA7075 & AA6061 aluminium alloy were produced at different tool rotational speeds of 650,700, 800, 900, 1000 and transverse speed of 30, 35, 40 mm/min. TIG welding was conducted along the rolling direction of similar and dissimilar aluminium plates. The Brinell hardness testing techniques were employed to conduct the tests; these tests were conducted on the welds to ascertain the joint integrity before characterization to have an idea of the quality of the welds

Application on technique of joint time-frequency analysis of seismic signal's first arrival estimation

International Nuclear Information System (INIS)

Xu Chaoyang; Liu Junmin; Fan Yanfang; Ji Guohua

2008-01-01

Joint time-frequency analysis is conducted to construct one joint density function of time and frequency. It can open out one signal's frequency components and their evolvements. It is the new evolvement of Fourier analysis. In this paper, according to the characteristic of seismic signal's noise, one estimation method of seismic signal's first arrival based on triple correlation of joint time-frequency spectrum is introduced, and the results of experiment and conclusion are presented. (authors)

Survey indicated that core outcome set development is increasingly including patients, being conducted internationally and using Delphi surveys.

Science.gov (United States)

Biggane, Alice M; Brading, Lucy; Ravaud, Philippe; Young, Bridget; Williamson, Paula R

2018-02-17

There are numerous challenges in including patients in a core outcome set (COS) study, these can vary depending on the patient group. This study describes current efforts to include patients in the development of COS, with the aim of identifying areas for further improvement and study. Using the COMET database, corresponding authors of COS projects registered or published from 1 January 2013 to 2 February 2017 were invited via a personalised email to participate in a short online survey. The survey and emails were constructed to maximise the response rate by following the academic literature on enhancing survey responses. Personalised reminder emails were sent to non-responders. This survey explored the frequency of patient input in COS studies, who was involved, what methods were used and whether or not the COS development was international. One hundred and ninety-two COS developers were sent the survey. Responses were collected from 21 February 2017 until 7 May 2017. One hundred and forty-six unique developers responded, yielding a 76% response rate and data in relation to 195 unique COSs (as some developers had worked on multiple COSs). Of focus here are their responses regarding 162 COSs at the published, completed or ongoing stages of development. Inclusion of patient participants was indicated in 87% (141/162) of COSs in the published completed or ongoing stages and over 94% (65/69) of ongoing COS projects. Nearly half (65/135) of COSs included patient participants from two or more countries and 22% (30/135) included patient participants from five or more countries. The Delphi survey was reported as being used singularly or in combination with other methods in 85% (119/140) of projects. Almost a quarter (16/65) of ongoing studies reported using a combination of qualitative interviews, Delphi survey and consensus meeting. These findings indicated that the Delphi survey is the most popular method of facilitating patient participation, while the combination of

Small cetacean aerial survey conducted in Alaskan waters by Alaska Fisheries Science Center, National Marine Mammal Laboratory from 1997-05-08 to 1999-07-04 (NCEI Accession 0131991)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Aerial surveys were conducted to produce abundance estimates for the three Alaska stocks of harbor porpoise. Surveys occurred from May to July 1997 for the Southeast...

Incudomalleal joint formation: the roles of apoptosis, migration and downregulation

Directory of Open Access Journals (Sweden)

Matalova Eva

2007-12-01

Full Text Available Abstract Background The middle ear of mammals is composed of three endochondrial ossicles, the stapes, incus and malleus. Joints link the malleus to the incus and the incus to the stapes. In the mouse the first arch derived malleus and incus are formed from a single Sox9 and Type II collagen expressing condensation that later subdivides to give rise to two separate ossicles. In contrast the stapes forms from a separate condensation derived from the second branchial arch. Fusion of the malleus and incus is observed in a number of human syndromes and results in conductive hearing loss. Understanding how this joint forms during normal development is thus an important step in furthering our understanding of such defects. Results We show that the developing incudomalleal joint is characterised by a lack of proliferation and discrete areas of apoptosis. Apoptosis has been suggested to aid in the removal of pre-cartilaginous cells from the joint region, allowing for the physical separation of the cartilaginous elements, however, we show that joint initiation is unaffected by blocking apoptosis. There is also no evidence of cell migration out of the presumptive joint region, as observed by labelling of joint and ossicle cells in culture. Using Type II collagen lacZ reporter mice, however, it is evident that cells in the presumptive joint region remain in place and downregulate cartilage markers. Conclusion The malleus and incus first appear as a single united condensation expressing early cartilage markers. The incudomalleal joint region forms by cells in the presumptive joint region switching off cartilage markers and turning on joint markers. Failure in this process may result in fusion of this joint, as observed in human syndromes such as Branchio-Oto-Renal Syndrome or Treacher Collins Syndrome.

FY 1999 Report on overseas geological structure surveys. Joint Japan-China Yu Xian exploitation project; 1999 nendo kaigai chishitsu kozo nado chosa hokokusho. Nippon Chugoku sekitan kyodo tansa Yu Xian project

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This project is based on the (agreement of the joint exploitation project for Yu Xian block in Yu Xian coal mine, Province of Hepei by Japan's NEDO and China's Coal Geological Bureau), signed on October 4, 1996. The joint project mainly comprises seismic exploitation and test drilling, Japan being mainly responsible for the former and China for the latter. The final report will be drawn jointly for the geological survey results necessary for designing coal mines. The Yu Xian block contains the Jurassic coal seams, which are covered by the Quaternary bed and not exposed to the surface. The Quaternary bed base is 50 to 400 m deep from the surface, and coal seams are 300 to 700 m deep also from the surface. A total of 11 coal seams are located in the Xiahuayuan strata as the coal-bearing strata. The first and fifth seams are most promising ones. In particular, the fifth seam is thick (0.2 to 6.91 m thick) and distributed throughout the block. It is estimated that 8 coal seams have a total coal quantity of approximately 346 million tons. (NEDO)

Airborne geophysical surveys conducted in western Nebraska, 2010: contractor reports and data

Science.gov (United States)

,

2014-01-01

This report contains three contractor reports and data files for an airborne electromagnetic survey flown from June 28 to July 7, 2010. The first report; “SkyTEM Survey: Nebraska, USA, Data” describes data aquisition and processing from a time-domain electromagnetic and magnetic survey performed by SkyTEM Canada, Inc. (the North American SkyTEM subsidiary), in western Nebraska, USA. Digital data for this report are given in Appendix 1. The airborne geophysical data from the SkyTEM survey subsequently were processed and inverted by Aarhus Geophysics ApS, Aarhus, Denmark, to produce resistivity depth sections along each flight line. The result of that processing is described in two reports presented in Appendix 2, “Processing and inversion of SkyTEM data from USGS Area UTM–13” and “Processing and inversion of SkyTEM data from USGS Area UTM–14.” Funding for these surveys was provided by the North Platte Natural Resources District, the South Platte Natural Resources District, and the Twin Platte Natural Resources District, in Scottsbluff, Sidney, and North Platte, Nebraska, respectively. Any additional information concerning the geophysical data may be obtained from the U.S. Geological Survey Crustal Geophysics and Geochemistry Science Center, Denver Colorado.

FY 1998 annual report on the survey report on possibility of international joint researches for Asian countries. 5; 1998 nendo Asia chiiki kokusai kyodo kenkyu kanosei chosa hokokusho. 5

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Described herein are results of surveys on dissemination policies for, and development trends in, energy saving and new energy areas in 6 Asian countries, Thailand, Indonesia, Malaysia, the Philippines, India and China. Possible joint research themes for Indonesia include effective utilization of palm oil residue, modernization of distribution systems, high-efficiency coal-fired thermal power generation techniques, and promotion of dissemination of solar cells. For Malaysia, renewable energies, e.g., photovoltaic power, will be developed to promote electrification for those areas not well electrified. The Philippines is positively receiving technical and financial aids for new energy and energy-saving areas from the advanced countries. India is considering to introduce a number of projects for, e.g., technological optimization of power supply area, decentralized power generation, oil exploitation and extraction techniques, and photovoltaic power generation. China is still in the preliminary stage in its energy research and development, and will need further joint researches in the energy sector. (NEDO)

Cross-view gait recognition using joint Bayesian

Science.gov (United States)

Li, Chao; Sun, Shouqian; Chen, Xiaoyu; Min, Xin

2017-07-01

Human gait, as a soft biometric, helps to recognize people by walking. To further improve the recognition performance under cross-view condition, we propose Joint Bayesian to model the view variance. We evaluated our prosed method with the largest population (OULP) dataset which makes our result reliable in a statically way. As a result, we confirmed our proposed method significantly outperformed state-of-the-art approaches for both identification and verification tasks. Finally, sensitivity analysis on the number of training subjects was conducted, we find Joint Bayesian could achieve competitive results even with a small subset of training subjects (100 subjects). For further comparison, experimental results, learning models, and test codes are available.

Joint instability and osteoarthritis.

Science.gov (United States)

Blalock, Darryl; Miller, Andrew; Tilley, Michael; Wang, Jinxi

2015-01-01

Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA). Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA.

Use of joint-growth directions and rock textures to infer thermal regimes during solidification of basaltic lava flows

Science.gov (United States)

Degraff, James M.; Long, Philip E.; Aydin, Atilla

1989-09-01

Thermal contraction joints form in the upper and lower solidifying crusts of basaltic lava flows and grow toward the interior as the crusts thicken. Lava flows are thus divided by vertical joints that, by changes in joint spacing and form, define horizontal intraflow layers known as tiers. Entablatures are tiers with joint spacings less than about 40 cm, whereas colonnades have larger joint spacings. We use structural and petrographic methods to infer heat-transfer processes and to constrain environmental conditions that produce these contrasting tiers. Joint-surface morphology indicates overall joint-growth direction and thus identifies the level in a flow where the upper and lower crusts met. Rock texture provides information on relative cooling rates in the tiers of a flow. Lava flows without entablature have textures that develop by relatively slow cooling, and two joint sets that usually meet near their middles, which indicate mostly conductive cooling. Entablature-bearing flows have two main joint sets that meet well below their middles, and textures that indicate fast cooling of entablatures and slow cooling of colonnades. Entablatures always occur in the upper joint sets and sometimes alternate several times with colonnades. Solidification times of entablature-bearing flows, constrained by lower joint-set thicknesses, are much less than those predicted by a purely conductive cooling model. These results are best explained by a cooling model based on conductive heat transfer near a flow base and water-steam convection in the upper part of an entablature-bearing flow. Calculated solidification rates in the upper parts of such flows exceed that of the upper crust of Kilauea Iki lava lake, where water-steam convection is documented. Use of the solidification rates in an available model of water-steam convection yields permeability values that agree with measured values for fractured crystalline rock. We conclude, therefore, that an entablature forms when part

Joint Technical Coordinating Group on Aircraft Survivability (JTCG/AS). Bibliography of Joint Aircraft Survivability Reports

Science.gov (United States)

2000-07-01

PMSG ). Report No.: JTCG/AS-99-D-003 Report Classification: UNCLASSIFIED Title: JTCG/AS Bibliography of Joint Aircraft Survivability Reports and...indicates those approved and not approved for funding by the Principal Members Steering Group ( PMSG ). Report No.: Report Classification: JTCG/AS-97-V-010...demonstrated by additional tests conducted at NWSC/Crane (up to Mach 0.8) and Rockwell International wind tunnel (up to Mach 1/9 and 30,000 feet altitude

Quarry Haul Road Ecological Survey

International Nuclear Information System (INIS)

1992-09-01

This biological survey was performed to document the summer flora and fauna found along the haul road constructed as part of the remedial action for the quarry bulk waste. State and Federal species listed as threatened or endangered were noted if encountered while surveying. Sampling locations were equally spaced along the quarry haul road, and a survey for vegetation and birds conducted at each location. Bird observations were conducted as breeding bird surveys once in June of 1991, and again in June of 1992. Each year's survey includes two observations in the early morning and one late in the evening. Vegetation surveys were conducted in 1991 using quadrants and transects. mammal, reptile, and amphibian sightings were noted as encountered

Joint Instability and Osteoarthritis

Directory of Open Access Journals (Sweden)

Darryl Blalock

2015-01-01

Full Text Available Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA. Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA.

International joint ventures

DEFF Research Database (Denmark)

Sørensen, Karsten Engsig

2001-01-01

The article analysis problems connected with corporate joint ventures. Among others the possible conflicts between the joint venture agreement and the statutes of the companies is examined, as well as certain problems connected to the fact that the joint venture partners have created commen control...... over their joint company....

Impact of Inpatient Versus Outpatient Total Joint Arthroplasty on 30-Day Hospital Readmission Rates and Unplanned Episodes of Care.

Science.gov (United States)

Springer, Bryan D; Odum, Susan M; Vegari, David N; Mokris, Jeffrey G; Beaver, Walter B

2017-01-01

This article describes a study comparing 30-day readmission rates between patients undergoing outpatient versus inpatient total hip (THA) and knee (TKA) arthroplasty. A retrospective review of 137 patients undergoing outpatient total joint arthroplasty (TJA) and 106 patients undergoing inpatient (minimum 2-day hospital stay) TJA was conducted. Unplanned hospital readmissions and unplanned episodes of care were recorded. All patients completed a telephone survey. Seven inpatients and 16 outpatients required hospital readmission or an unplanned episode of care following hospital discharge. Readmission rates were higher for TKA than THA. The authors found no statistical differences in 30-day readmission or unplanned care episodes. Copyright © 2016 Elsevier Inc. All rights reserved.

Joint Chiefs of Staff > About > The Joint Staff > Senior Enlisted Advisor

Science.gov (United States)

Skip to main content (Press Enter). Toggle navigation Joint Chiefs of Staff Joint Chiefs of Staff Joint Chiefs of Staff Facebook Twitter YouTube Flickr Blog Instagram Search JCS: Search Search Search JCS: Search Home Media News Photos Videos Publications About The Joint Staff Chairman Vice Chairman

A joint-constraint model for human joints using signed distance-fields

DEFF Research Database (Denmark)

Engell-Nørregård, Morten Pol; Abel, Sarah Maria Niebe; Erleben, Kenny

2012-01-01

We present a local joint-constraint model for a single joint which is based on distance fields. Our model is fast, general, and well suited for modeling human joints. In this work, we take a geometric approach and model the geometry of the boundary of the feasible region, i.e., the boundary of all...... allowed poses. A region of feasible poses can be built by embedding motion captured data points in a signed distance field. The only assumption is that the feasible poses form a single connected set of angular values. We show how signed distance fields can be used to generate fast and general joint......-joint dependencies, or joints with more than three degrees of freedom. The resolution of the joint-constraints can be tweaked individually for each degree of freedom, which can be used to optimize memory usage. We perform a comparative study of the key-properties of various joint-constraint models, as well...

Fiscal 1999 research cooperation on the development of an advanced multimedia information system. Cooperation on joint research; 1999 nendo senshinteki multimedia joho system no kaihatsu ni kansuru kenkyu kyoryoku. Kyodo kenkyu kyoryoku

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report covers fiscal 1999 activities under a 5-year program which is a joint effort with China started in fiscal 1998 for the development and verification of a prototype for the above-named system to comprehensively deal with commodity distribution information, education and culture information, agriculture information, disaster/forest fire control information, medical treatment information, and environment monitor/flood watch information. A total of 12 Chinese researchers were invited to this country over the systems for disaster/forest fire control information and environment monitor/flood watch information, when the status in Japan and progress in China of the research were discussed. Joint research in China involved on-site surveys conducted relative to systems for commodity distribution information, education and culture information, medical treatment information, and environment monitor/flood watch information. Endeavors were then exerted, which concerned the survey of candidate locations for distribution centers, acknowledgement of the result of verification tests, training for equipment operation, arrangements for the contents of research, and the establishment of a mutual understanding toward the signing of annexes to the Agreement. (NEDO)

Iranian mental health survey: design and field proced.

Directory of Open Access Journals (Sweden)

Afarin Rahimi-Movaghar

2014-06-01

Full Text Available Iranian Mental Health Survey (IranMHS was conducted to assess the twelve-month prevalence and severity of psychiatric disorders in the Iranian adult population and to determine the pattern of health care utilization and cost of services. IranMHS is a cross-sectional national household survey with face-to-face interviews as the main data collection method. The study was carried out between January and June 2011. A three-stage probability sampling was applied for the selection of a representative sample from the non-institutionalized population aged 15 to 64. The primary instrument utilized for assessing the prevalence of mental disorders was the Persian version of Composite International Diagnosis Interview, version 2.1. The instruments for assessing the service and cost of mental illness were developed by the research team. The response rate was 86.2%, and a total of 7886 individuals participated in the study. Sampling weights were the joint product of inverse probability of unit selection, non-response weights and post-stratification weights. This paper presents an overview of the study design, fieldwork organization and procedures, weightings and analysis. The strengths and limitations of the study are also discussed.

Estimation of Joint types and Joint Limits from Motion capture data

DEFF Research Database (Denmark)

Engell-Nørregård, Morten Pol; Erleben, Kenny

2009-01-01

It is time-consuming for an animator to explicitly model joint types and joint limits of articulated figures. In this paper we describe a simple and fast approach to automated joint estimation from motion capture data of articulated figures. Our method will make the joint modeling more efficient ...

Tensile Strength of Finger Joints at Elevated Temperatures

DEFF Research Database (Denmark)

Nielsen, Peter C.; Olesen, Frits Bolonius

A series of test s aimed a t establishing the effect of temperature upon the tensile strength parallel-to-grain of finger jointed laminae for glulam has been conducted in the Fire Research Laboratory at Aalborg University Centre. The objective of this report is to present the background...

Subspeciality training in hematology and oncology, 2003: results of a survey of training program directors conducted by the American Society of Hematology.

Science.gov (United States)

Todd, Robert F; Gitlin, Scott D; Burns, Linda J

2004-06-15

A survey of directors of adult and pediatric hematology/oncology subspecialty training programs in the United States and Canada was conducted to assess the environment in which recruitment and training is conducted in these medical disciplines. A total of 107 program directors responded to the survey, representing 66% of internal medicine and 47% of pediatric subspecialty programs in hematology or hematology/oncology. Specific areas covered in the web-based questionnaire included the type and demographics of the training program, profile of the training program director, characteristics of the applicant pool and existing trainee recruits, characteristics of the training program environment and curricula, research productivity of trainees, and the career pathways taken by recent training program graduates (including dominant areas of clinical interest). The results of this survey show considerable heterogeneity in the recruiting practices and the environment in which subspecialty training occurs, leading the authors to recommend improvements in or a heightened attention to issues, including recruitment of minority trainees, flexibility to recruit international medical school graduates, timing of trainee acceptance, maintaining the financial support of Medicare graduation medical education (GME), training of physician scientists, organization of the continuity clinic experience, visibility of nonmalignant hematology as a career path, and level of training program director support.

Groundfish/Shrimp and Red Snapper trawl surveys conducted in the Gulf of Mexico from 1990-01-01 to 2014-12-30 (NCEI Accession 0147703)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Southeast Fisheries Science Center Mississippi Laboratories has conducted standardized groundfish trawl surveys in the Gulf of Mexico since 1987. Prior to 1987,...

Conducting Sanitary Surveys of Water Supply Systems. Student Workbook.

Science.gov (United States)

1976

This workbook is utilized in connection with a 40-hour course on sanitary surveys of water supply systems for biologists, chemists, and engineers with experience as a water supply evaluator. Practical training is provided in each of the 21 self-contained modules. Each module outlines the purpose, objectives and content for that section. The course…

FY 1998 basic survey for coal resource development. Data collection of the joint research of new technology in the geophysical exploration of coal resources (land area shallow seam survey); 1998 nendo sekitan shigen kaihatsu kiso chosa shiryoshu. Shintansa gijutsu chosa kaihatsu (rikuiki senso tansa)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This is a compilation of the data on the coal resource land area shallow seam survey conducted in FY 1998 as the basic survey for coal resource development. The trend survey was made from July 26 to August 6, 1998. The purposes of the survey are to study the image analysis method, examples of application of the reflection seismic survey to coal, and inversion technology. The data compilation includes the following: 1. Minutes of the proceedings of the FY 1998 Japan-Australia steering committee (in English). 2. Data/proceedings of the FY 1998 Japan-Australia technical study committee (in English). 3. Results of the GPS measurement of reflection seismic survey traverse lines in Caroona district. 4. List of parameters in the FY 1998 reflection seismic survey data processing. 5. Report on the work of inspection/repair of seismic pulse generator. 6. List of the data on diameter of the test boring conducted in FY 1998. 7. NEDO-DMR CAROONA DDH borehole core pictures. 8. Estimated curves. 9. Report on the trend survey of the FY 1998 coal resource development basic survey (land area shallow seam survey). 10. Pictures. 11. Data on the 1st (FY 1998) new exploration technology study committee. (NEDO)

Reliability of Tubular Joints

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Thoft-Christensen, Palle

In this paper the preliminary results obtained by tests on tubular joints are presented. The joints are T-joints and the loading is static. It is the intention in continuation of these tests to perform tests on other types of joints (e.g. Y-joints) and also with dynamic loading. The purpose...... of the test is partly to obtain empirical data for the ultimate load-carrying capacity of tubular T-joints and partly to obtain some experience in performing tests with tubular joints. It is well known that tubular joints are usually designed in offshore engineering on the basis of empirical formulas obtained...... by experimental test results. Therefore, there is a need for performing experimental tests in this area....

A survey of radiation synovectomy in Europe, 1991-1993

International Nuclear Information System (INIS)

Clunie, G.; Ell, P.J.

1995-01-01

We have evaluated radiation synovectomy practice in Europe over the period 1991-1993 by means of a postal questionnaire. More than 2300 European members of the European Association of Nuclear Medicine were questioned about the number of treated patients and joints, disease prevalence in their patients and the use of radiopharmaceuticals. Overall, 119/490 (24%) of centres replying to the survey practised radiation synovectomy during the 3 years. There were 13450 different joint injections in 8578 patients. Rheumatoid arthritis was the most prevalent disease in patients treated (71%) and the most frequently treated joints were knee (46%) and finger joints (20%). Eight different radiopharmaceuticals were employed. Yttrium-90 colloids were most frequently and widely (100/119 centres) used, mainly employed for knee synovectomy but were also used to treat most appendicular joints. Erbium-169 colloid was almost exclusively used to treat finger joints (31/33 centres). Corticosteroid was routinely co-injected in 36/60 (60%) centres. Radiation synovectomy was widely practised throughout Europe during 1991-1993. There are variations in practice illustrated by the diversity of treated arthritides and injected joints and by the use and application of different radiopharmaceuticals. (orig.). With 7 figs., 1 tab

SWFSC/MMTD: Collaborative Large Whale Survey (CLaWS) 2015

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Collaborative Large Whale Survey is a joint field effort by Southwest Fisheries Science Center (SWFSC) and Alaska Fisheries Science Center (AFSC). The 4-month...

Cryotherapy on postoperative rehabilitation of joint arthroplasty.

Science.gov (United States)

Ni, Sheng-Hui; Jiang, Wen-Tong; Guo, Lei; Jin, Yu-Heng; Jiang, Tian-Long; Zhao, Yuyan; Zhao, Jie

2015-11-01

The effectiveness of cryotherapy on joint arthroplasty recovery remains controversial. This systematic review was conducted to assess the effectiveness of cryotherapy in patients after joint arthroplasty. Comprehensive literature searches of several databases including Cochrane Library (2013), MEDLINE (1950-2013), and Embase (1980-2013) were performed. We sought randomised controlled trials that compared the experimental group received any form of cryotherapy with any control group after joint arthroplasty. The main outcomes were postoperative blood loss, adverse events, and pain. Analyses were performed with Revman 5.0. Results were shown as mean differences (MD) and standard deviations or as risk difference and 95 % confidence intervals (CIs). Ten trials comprised 660 total knee arthroplastys and three trials comprised 122 total hip arthroplastys (THAs) met the inclusion criteria. Blood loss was significantly decreased by cryotherapy (MD = -109.68; 95 % CI -210.92 to -8.44; P = 0.03). Cryotherapy did not increase the risk of adverse effect (n.s.). Cryotherapy decreased pain at the second day of postoperative (MD = -1.32; 95 % CI -2.37 to -0.27; P = 0.0003), but did not decreased pain at the first and third day of postoperative (n.s.). Cryotherapy appears effective in these selected patients after joint arthroplasty. The benefits of cryotherapy on blood loss after joint arthroplasty were obvious. However, the subgroup analysis indicated that cryotherapy did not decreased blood loss after THA. Cryotherapy did not increase the risk of adverse effect. Cryotherapy decreased pain at the second day of postoperative, but did not decreased pain at the first and third day of postoperative. II.

Experimental Studies on the Mechanical Behaviour of Rock Joints with Various Openings

Science.gov (United States)

Li, Y.; Oh, J.; Mitra, R.; Hebblewhite, B.

2016-03-01

The mechanical behaviour of rough joints is markedly affected by the degree of joint opening. A systematic experimental study was conducted to investigate the effect of the initial opening on both normal and shear deformations of rock joints. Two types of joints with triangular asperities were produced in the laboratory and subjected to compression tests and direct shear tests with different initial opening values. The results showed that opened rock joints allow much greater normal closure and result in much lower normal stiffness. A semi-logarithmic law incorporating the degree of interlocking is proposed to describe the normal deformation of opened rock joints. The proposed equation agrees well with the experimental results. Additionally, the results of direct shear tests demonstrated that shear strength and dilation are reduced because of reduced involvement of and increased damage to asperities in the process of shearing. The results indicate that constitutive models of rock joints that consider the true asperity contact area can be used to predict shear resistance along opened rock joints. Because rock masses are loosened and rock joints become open after excavation, the model suggested in this study can be incorporated into numerical procedures such as finite-element or discrete-element methods. Use of the model could then increase the accuracy and reliability of stability predictions for rock masses under excavation.

Temporomandibular joint involvement as a positive clinical prognostic factor in necrotising external otitis.

Science.gov (United States)

Yeheskeli, E; Eta, R Abu; Gavriel, H; Kleid, S; Eviatar, E

2016-05-01

Necrotising otitis externa is associated with high morbidity and mortality rates. This study investigated whether temporomandibular joint involvement had any prognostic effect on the course of necrotising otitis externa in patients who had undergone hyperbaric oxygen therapy after failed medical and sometimes surgical therapy. A retrospective case series was conducted of patients in whom antibiotic treatment and surgery had failed, who had been hospitalised for further treatment and hyperbaric oxygen therapy. Twenty-three patients with necrotising otitis externa were identified. The temporomandibular joint was involved in four patients (17 per cent); these patients showed a constant gradual improvement in C-reactive protein and were eventually discharged free of disease, except one patient who was lost to follow up. Four patients (16 per cent) without temporomandibular joint involvement died within 90 days of discharge, while all patients with temporomandibular joint involvement were alive. Three patients (13 per cent) without temporomandibular joint involvement needed recurrent hospitalisation including further hyperbaric oxygen therapy; no patients with temporomandibular joint involvement required such treatment. Patients with temporomandibular joint involvement had lower rates of recurrent disease and no mortality. Therefore, we suggest considering temporomandibular joint involvement as a positive prognostic factor in necrotising otitis externa management.

In-field implementation of impedance-based structural health monitoring for insulated rail joints

Science.gov (United States)

Albakri, Mohammad I.; Malladi, V. V. N. Sriram; Woolard, Americo G.; Tarazaga, Pablo A.

2017-04-01

Track defects are a major safety concern for the railroad industry. Among different track components, insulated rail joints, which are widely used for signaling purposes, are considered a weak link in the railroad track. Several joint-related defects have been identified by the railroad community, including rail wear, torque loss, and joint bar breakage. Current track inspection techniques rely on manual and visual inspection or on specially equipped testing carts, which are costly, timeconsuming, traffic disturbing, and prone to human error. To overcome the aforementioned limitations, the feasibility of utilizing impedance-based structural health monitoring for insulated rail joints is investigated in this work. For this purpose, an insulated joint, provided by Koppers Inc., is instrumented with piezoelectric transducers and assembled with 136 AREA rail plugs. The instrumented joint is then installed and tested at the Facility for Accelerated Service Testing, Transportation Technology Center Inc. The effects of environmental and operating conditions on the measured impedance signatures are investigated through a set of experiments conducted at different temperatures and loading conditions. The capabilities of impedance-based SHM to detect several joint-related damage types are also studied by introducing reversible mechanical defects to different joint components.

Comparison of Shallow Survey 2012 Multibeam Datasets

Science.gov (United States)

Ramirez, T. M.

2012-12-01

The purpose of the Shallow Survey common dataset is a comparison of the different technologies utilized for data acquisition in the shallow survey marine environment. The common dataset consists of a series of surveys conducted over a common area of seabed using a variety of systems. It provides equipment manufacturers the opportunity to showcase their latest systems while giving hydrographic researchers and scientists a chance to test their latest algorithms on the dataset so that rigorous comparisons can be made. Five companies collected data for the Common Dataset in the Wellington Harbor area in New Zealand between May 2010 and May 2011; including Kongsberg, Reson, R2Sonic, GeoAcoustics, and Applied Acoustics. The Wellington harbor and surrounding coastal area was selected since it has a number of well-defined features, including the HMNZS South Seas and HMNZS Wellington wrecks, an armored seawall constructed of Tetrapods and Akmons, aquifers, wharves and marinas. The seabed inside the harbor basin is largely fine-grained sediment, with gravel and reefs around the coast. The area outside the harbor on the southern coast is an active environment, with moving sand and exposed reefs. A marine reserve is also in this area. For consistency between datasets, the coastal research vessel R/V Ikatere and crew were used for all surveys conducted for the common dataset. Using Triton's Perspective processing software multibeam datasets collected for the Shallow Survey were processed for detail analysis. Datasets from each sonar manufacturer were processed using the CUBE algorithm developed by the Center for Coastal and Ocean Mapping/Joint Hydrographic Center (CCOM/JHC). Each dataset was gridded at 0.5 and 1.0 meter resolutions for cross comparison and compliance with International Hydrographic Organization (IHO) requirements. Detailed comparisons were made of equipment specifications (transmit frequency, number of beams, beam width), data density, total uncertainty, and

Dynamic characteristics analysis of deployable space structures considering joint clearance

Science.gov (United States)

Li, Tuanjie; Guo, Jian; Cao, Yuyan

2011-04-01

The clearance in joints influences the dynamic stability and the performance of deployable space structures (DSS). A virtual experimental modal analysis (VEMA) method is proposed to deal with the effects of joint clearance and link flexibility on the dynamic characteristics of the DSS in this paper. The focus is on the finite element modeling of the clearance joint, VEMA and the modal parameters identification of the DSS. The finite element models (FEM) of the clearance joint and the deployable structure are established in ANSYS. The transient dynamic analysis is conducted to provide the time history data of excitation and response for the VEMA. The fast Fourier transform (FFT) technique is used to transform the data from time domain to frequency domain. The frequency response function is calculated to identify the modal parameters of the deployable structure. Experimental verification is provided to indicate the VEMA method is both a cost and time efficient approach to obtain the dynamic characteristics of the DSS. Finally, we analyze the effects of clearance size and gravity on the dynamic characteristics of the DSS. The analysis results indicate that the joint clearance and gravity strongly influence the dynamic characteristics of the DSS.

Seismic reflection survey conducted in Benton County, Washinton

International Nuclear Information System (INIS)

Beggs, H.G.; Heineck, R.L.

1980-01-01

The massive Columbia River Basalt group that underlies the Hanford Site is being considered as a potential geologic repository for spent nuclear fuel. As part of the effort to ascertain and better understand the physical and geological properties of these basalt flows, a multiphased seismic reflection program has been undertaken. This phase was designed to more thoroughly define geologic features and structural attitudes in an areas in the central part of the Hanford Site. The specific feature of interest is known as the Cold Creek Syncline. This seismic survey, utilized the ''VIBROSEIS'' energy source and multifold common depth point recording. 2 figs

Joint inversion of multi-configuration electromagnetic induction data to characterize subsurface electrical conductivity

KAUST Repository

Jadoon, Khan

2012-01-01

Electromagnetic induction (EMI) devices are capable of measuring the cumulative electrical conductivity over a certain depth range. In this study, a numerical experiment has been performed to test a novel join inversion approach for the Geonics EM34 instrument, by considering different coil offsets (10, 20 and 40 m), different coil orientations (vertical and horizontal), and different frequencies (6.4, 1.6 and 0.4 kHz). The subsurface is considered as four-layer model having different conductivities. The global multilevel coordinate search optimization algorithm is sequentially combination with the local optimization algorithm to minimize the misfit between the measured and modeled data. The layer conductivities are well predicted by the join inversion of electromagnetic data. The response surface of the objective function was investigated to assess the sensitivity of the subsurface layer conductivities. The sensitivity of the conductivity for the top two layers is less as compared to the deeper layers. The proposed approach is promising for the fast mapping of true conductivity distributions over large areas.

Vestibular evoked myogenic potential testing for the diagnosis of conductive hearing loss: survey of pediatric otolaryngologists' knowledge and beliefs.

Science.gov (United States)

Dargie, Jenna M; Zhou, Guangwei; Dornan, Briana K; Whittemore, Kenneth R

2014-11-01

To assess physicians' knowledge and beliefs regarding vestibular evoked myogenic potential (VEMP) testing in children. A survey was delivered via email in html format to 1069 members of the American Academy of Otolaryngology--Head and Neck Surgery who identified as pediatric otolaryngologists. Study data were collected and managed using the Research Electronic Data Capture (REDCap) tools. 443 (41.4%) physicians opened the email. 190 (42.9% of opens) initiated the survey, of which 117 (61.9%) fully completed the survey of the physicians who responded to a question regarding knowledge of VEMP, 16% of respondents had never heard of the test. 16% of participants would use it in the setting of diagnosing pediatric conductive hearing loss. Responses regarding the youngest age at which VEMP is possible ranged from younger than 6 months through greater than 13 years of age. Beliefs regarding utility and reliability of VEMP varied, with 'unsure' as the most frequent response. Additionally, only 26% of pediatric otolaryngologists indicated some access to the test. The knowledge and availability of VEMP testing in the pediatric otolaryngology community varies widely. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Subminiature eddy-current transducers designed to study welded joints of titanium alloys

Science.gov (United States)

Malikov, V. N.; Dmitriev, S. F.; Katasonov, A. O.; Sagalakov, A. M.; Ishkov, A. V.

2017-12-01

Eddy current transducers (ECT) are used to construct a sensor for investigating titanium sheets connected by a welded joint. The paper provides key technical information about the eddy current transducer used and describes the procedure of measurements that makes it possible to control defects in welded joints of titanium alloys. It is capable of automatically changing the filtering cutoff frequency and operating frequency of the device. Experiments were conducted on welded VT1-0 titanium plates. The paper contains the results of these measurements. The dependence data facilitates the assessment of the quality of the welded joints and helps make an educated conclusion about welding quality.

Assesment of influncing factors on mechanical and electrical properties of Al/Cu joints

Science.gov (United States)

Selvaraj, R. Meby; Hynes, N. Rajesh Jesudoss

2018-05-01

Joining of dissimilar materials opens up challenging opportunities in todays technology. Al/Cu weldments are used in applications that demands corrosion resistance, thermal and electrical conducting properties. In dissimilar joining mechanical and thermal properties result in large stress gradients during heating. The Al-Cu joints are lighter, cheaper and have conductivity equal to copper alloy. The main scope of this study is to assess the influencing factors of Al/Cu joints in mechanical and electrical properties. It includes the influence of the dilution between the base metals, influence of physical properties, influence of welding parameters, influence of filler metal, influence of heat treatment, and influence of electrical properties

Infants’ Early Visual Attention and Social Engagement as Developmental Precursors to Joint Attention

Science.gov (United States)

Salley, Brenda; Sheinkopf, Stephen J.; Neal-Beevers, A. Rebecca; Tenenbaum, Elena J.; Miller-Loncar, Cynthia L.; Tronick, Ed; Lagasse, Linda L.; Shankaran, Seetha; Bada, Henrietta; Bauer, Charles; Whitaker, Toni; Hammond, Jane; Lester, Barry M.

2016-01-01

This study examined infants’ early visual attention (at 1 month of age) and social engagement (4 months) as predictors of their later joint attention (12 and 18 months). The sample (n=325), drawn from the Maternal Lifestyle Study, a longitudinal multicenter project conducted at four centers of the NICHD Neonatal Research Network, included high-risk (cocaine exposed) and matched non-cocaine exposed infants. Hierarchical regressions revealed that infants’ attention orienting at 1 month significantly predicted more frequent initiating joint attention at 12 (but not 18) months of age. Social engagement at 4 months predicted initiating joint attention at 18 months. Results provide the first empirical evidence for the role of visual attention and social engagement behaviors as developmental precursors for later joint attention outcome. PMID:27786527

Sacroiliac joint dysfunction in patients with herniated lumbar disc: a cross-sectional study.

Science.gov (United States)

Madani, Seyed Pezhman; Dadian, Mohammad; Firouznia, Keykavous; Alalawi, Salah

2013-01-01

To determine the relative frequency of sacroiliac joint dysfunction in a sample of patients with image proven lumbar disc herniation. A single group cross-sectional study was conducted in a three year period from 2007 in an outpatient clinic at a university hospital. Overall, 202 patients aged more than or equal to 18 years with image proven herniated lumbar disc and with physical findings suggestive of lumbosacral root irritation were included. Overall, 146 (72.3%) participants had sacroiliac joint dysfunction. The dysfunction was significantly more prevalent in females (pSacroiliac joint dysfunction is a significant pathogenic factor with high possibility of occurrence in low back pain. Thus, regardless of intervertebral disc pathology, sacroiliac joint dysfunction must be considered in clinical decision making.

Joint inversion of hydrogeophysical data for porous media characterization. A real case

Science.gov (United States)

De Biase, Michele; Chidichimo, Francesco; Rizzo, Enzo; Masi, Salvatore; Straface, Salvatore

2014-05-01

We present a multi-physical approach developed for the hydrodynamic characterization of real porous media using hydrogeophysical information. Several pumping tests have been performed in the Hydrogeosite, a controlled site designed and constructed at the CNR-IMAA laboratory, in Marsico Nuovo (Basilicata Region, Southern Italy). The facility consists of a pool (10×7×3 m3) completely covered with a steel shed, used to study water infiltration processes, to simulate the space and time dynamics of subsurface contamination phenomena, to improve and to find new relationship between geophysical and hydrogeological parameters, to test and to calibrate new geophysical techniques and instruments. The pool, because of its dimensions, is made by reinforced concrete, representing an intermediate stage between laboratory experiments and field survey. Therefore, the Hydrogeosite has the advantage to carry out controlled experiments, like in a flow-cell or sand-box, but at field comparable scale. The data collected during the experiments have been used to validate the following joint inversion model. Water flow in a variably saturated porous medium can be represented by the modified Richards equation (Richards, 1931; Panday et al., 1993): downtriangle ·[K (θ)downtriangleh ] = (S S + C (θ)) δh w s δt (1) where K is the hydraulic conductivity, h is the hydraulic head [m], θ is the water content[·], Sw is the reduced water content [·], Ss is the specific storage coefficient [m-1], and C(θ) is a function called 'specific moisture capacity' [m-1], defined as C(θ) = δθ/δψ, and could be determined for different soil types using curve fitting and laboratory experiments measuring the rate of infiltration of water into soil column. The Poisson equation provides a relationship between the self potential ϕ [V], which naturally occurs among points of the soil surface owing to the presence of an electric field produced by the motion of underground electrolytic fluids through

Fatigue Life Prediction of Self-Piercing Rivet Joints Between Magnesium and Aluminum Alloys

Directory of Open Access Journals (Sweden)

Kang Hong-Tae

2018-01-01

Full Text Available Various light materials including aluminum alloys and magnesium alloys are being used to reduce the weight of vehicle structures. Joining of dissimilar materials is always a challenging task to construct a solid structure. Self-piercing rivet (SPR joint is one of various joining methods for dissimilar materials. Front shock tower structures were constructed with magnesium alloy (AM60 joined to aluminum alloy (Al6082 by SPR joints. To evaluate the durability performance of the SPR joints in the structures, fatigue tests of the front shock tower structures were conducted with constant amplitude loadings. Furthermore, this study investigated fatigue life prediction method of SPR joints and compared the fatigue life prediction results with that of experimental results. For fatigue life prediction of the SPR joints in the front shock tower structures, lap-shear and cross-tension specimens of SPR joint were constructed and tested to characterize the fatigue properties of the SPR joint. Then, the SPR joint was represented with area contact method (ACM in finite element (FE models. The load-life curves of the lap-shear and cross-tension specimens were converted to a structural stress-life (S-N curve of the SPR joints. The S-N curve was used to predict fatigue life of SPR joints in the front shock tower structures. The test results and the prediction results were well correlated.

Finite element analysis of dovetail joint made with the use of CNC technology

Directory of Open Access Journals (Sweden)

Václav Sebera

2010-01-01

Full Text Available The objective of the paper is the parametrization and the finite element analysis of mechanical pro­per­ties of a through dovetail joint made with the use of a specific procedure by a 3-axis CNC machine. This corner joint was used for the simulation of the bending load of the joint in the angle plane – by compression, i.e. by pressing the joint together. The deformation fields, the stress distribution, the stiffness and the bending moment of the joints were evaluated. The finite element system ANSYS was used to create two parametric numerical models of the joint. The first one represents an ideal­ly stiff joint – both joint parts have been glued together. The second model includes the contact between the joined parts. This numerical model was used to monitor the response of the joint stiffness to the change of the static friction coefficient. The results of both models were compared both with each other and with similar analyses conducted within the research into ready-to-assemble furniture joints. The results can be employed in the designing of more complex furniture products with higher demands concerning stiffness characteristics, such as furniture for sitting. However, this assumption depends on the correction of the created parametric models by experimental testing.

Experience of Orthodontic Treatment and Symptoms of Temporomandibular Joint in South Korean Adults.

Science.gov (United States)

Hwang, Sang-Hee; Park, Shin-Goo

2018-01-01

No epidemiological studies have targeted the association between experience of orthodontic treatment and symptoms of temporomandibular joint (TMJ) in a large adult population. In this study, we investigated whether experience of orthodontic treatment is associated with symptoms of TMJ in adults. We used data from the Fifth Korea National Health and Nutrition Examination Survey (KNHANES V), conducted in 2011. Trained dentists asked subjects to report their experience of orthodontic treatment and symptoms of TMJ. Overall, 5936 subjects aged over 19 yr were included in this study (2528 males). The data were analyzed using the chi-square test and multiple logistic regression tests. The group with experience of orthodontic treatment had more symptoms of TMJ than the group without orthodontic experience. After adjusting for all covariates (i.e., age, sex, marital status, income, education, stress, teeth injury, and occupation), the adjusted odds ratio was 2.53 (95%CI 1.74-3.67). Experience of orthodontic treatment could be related to increased symptoms of TMJ.

Application of Electromagnetic Induction to Monitor Changes in Soil Electrical Conductivity Profiles in Arid Agriculture

KAUST Repository

Jadoon, K.Z.

2015-09-06

In this research, multi-configuration electromagnetic induction (EMI) measurements were conducted in a corn field to estimate variation in soil electrical conductivity profiles in the roots zone. Electromagnetic forward model based on the full solution of Maxwell\\'s equation was used to simulate the apparent electrical conductivity measured with EMI system (the CMD mini-Explorer). Joint inversion of multi-configuration EMI measurements were performed to estimate the vertical soil electrical conductivity profiles. The inversion minimizes the misfit between the measured and modeled soil apparent electrical conductivity by DiffeRential Evolution Adaptive Metropolis (DREAM) algorithm, which is based on Bayesain approach. Results indicate that soil electrical conductivity profiles have low values close to the corn plants, which indicates loss of soil moisture due to the root water uptake. These results offer valuable insights into future potential and emerging challenges in the development of joint analysis of multi-configuration EMI measurements to retrieve effective soil electrical conductivity profiles.

Effect of technological procedures on the crack resistance of nickel alloy welded joints under heat treatment

International Nuclear Information System (INIS)

Bagdasarov, Yu.S.; Sorokin, L.I.; Yakushin, B.F.; Moryashchev, S.F.

1983-01-01

Comparison of the efficiency of some technological procedures directed to the increase of crack resistance of KhN50MBKTYUR (EhP99) alloy welded joints under heat treatment was conducted. Welded joints were manufactured by the methods of electron beam welding, laser welding, automatic argon-arc welding. The latter was conducted by conventional technology as well as with electromagnetic mixing of liquid metal of welding bath, with compulsory cooling of weld matal, with pulse arc. It is shown that the high fracture resistance of welded joints, manufactured by electron beam and laser welding is achieved by combination of high mechanical properties of heat affected zone metal and reduced elastic potential energy margin of residual welding stresses (as compared to argon-arc welding)

Joint U.S./Russian plutonium disposition study: Nonproliferation issues

International Nuclear Information System (INIS)

Jaeger, C.; Erkkila, B.; Fearey, B.; Ehinger, M.; McAllister, S.; Chitaykin, V.; Ptashny, V.

1996-01-01

In an effort to establish joint activities in the disposition of fissile materials from nuclear materials, the US and Russia agreed to conduct joint work to develop consistent comparisons of various alternatives for the disposition of weapons-grade plutonium. Joint working groups were established for the analysis of alternatives for plutonium management for water reactors, fast reactors, storage, geological formations, immobilization and stabilization of solutions and other forms. In addition cross-cutting working groups were established for economic analysis and nonproliferation (NP). This paper reviews the activities of the NP working group in support of these studies. The NP working group provided integrated support in the area of nuclear NP to the other US/Russian Study teams. It involved both domestic safeguards and security and international safeguards. The analysis of NP involved consideration of the resistance to theft or diversion and resistance to retrieval, extraction or reuse

Failure Mechanisms of SAC/Fe-Ni Solder Joints During Thermal Cycling

Science.gov (United States)

Gao, Li-Yin; Liu, Zhi-Quan; Li, Cai-Fu

2017-08-01

Thermal cycling tests have been conducted on Sn-Ag-Cu/Fe- xNi ( x = 73 wt.% or 45 wt.%) and Sn-Ag-Cu/Cu solder joints according to the Joint Electron Device Engineering Council industrial standard to study their interfacial reliability under thermal stress. The interfacial intermetallic compounds formed for solder joints on Cu, Fe-73Ni, and Fe-45Ni were 4.5 μm, 1.7 μm, and 1.4 μm thick, respectively, after 3000 cycles, demonstrating excellent diffusion barrier effect of Fe-Ni under bump metallization (UBM). Also, two deformation modes, viz. solder extrusion and fatigue crack formation, were observed by scanning electron microscopy and three-dimensional x-ray microscopy. Solder extrusion dominated for solder joints on Cu, while fatigue cracks dominated for solder joints on Fe-45Ni and both modes were detected for those on Fe-73Ni. Solder joints on Fe-Ni presented inferior reliability during thermal cycling compared with those on Cu, with characteristic lifetime of 3441 h, 3190 h, and 1247 h for Cu, Fe-73Ni, and Fe-45Ni UBM, respectively. This degradation of the interfacial reliability for solder joints on Fe-Ni is attributed to the mismatch in coefficient of thermal expansion (CTE) at interconnection level. The CTE mismatch at microstructure level was also analyzed by electron backscatter diffraction for clearer identification of recrystallization-related deformation mechanisms.

[Self-assembly tissue engineering fibrocartilage model of goat temporomandibular joint disc].

Science.gov (United States)

Kang, Hong; Li, Zhen-Qiang; Bi, Yan-Da

2011-06-01

To construct self-assembly fibrocartilage model of goat temporomandibular joint disc and observe the biological characteristics of the self-assembled fibrocartilage constructs, further to provide a basis for tissue engineering of the temporomandibular joint disc and other fibrocartilage. Cells from temporomandibular joint discs of goats were harvested and cultured. 5.5 x 10(6) cells were seeded in each agarose well with diameter 5 mm x depth 10 mm, daily replace of medium, cultured for 2 weeks. One day after seeding, goat temporomandibular joint disc cells in agarose wells were gathered and began to self-assemble into a disc-shaped base, then gradually turned into a round shape. When cultured for 2 weeks, hematoxylin-eosin staining was conducted and observed that cells were round and wrapped around by the matrix. Positive Safranin-O/fast green staining for glycosaminoglycans was observed throughout the entire constructs, and picro-sirius red staining was examined and distribution of numerous type I collagen was found. Immunohistochemistry staining demonstrated brown yellow particles in cytoplasm and around extracellular matrix, which showed self-assembly construct can produce type I collagen as native temporomandibular joint disc tissue. Production of extracellular matrix in self-assembly construct as native temporomandibular joint disc tissue indicates that the use of agarose wells to construct engineered temporomandibular joint disc will be possible and practicable.

Fatigue behaviour of friction welded medium carbon steel and austenitic stainless steel dissimilar joints

International Nuclear Information System (INIS)

Paventhan, R.; Lakshminarayanan, P.R.; Balasubramanian, V.

2011-01-01

Research highlights: → Fusion welding of dissimilar metals is a problem due to difference in properties. → Solid state welding process such as friction welding is a solution for the above problem. → Fatigue life of friction welded carbon steel and stainless steel joints are evaluated. → Effect of notch on the fatigue life of friction welded dissimilar joints is reported. → Formation of intermetallic is responsible for reduction in fatigue life of dissimilar joints. -- Abstract: This paper reports the fatigue behaviour of friction welded medium carbon steel-austenitic stainless steel (MCS-ASS) dissimilar joints. Commercial grade medium carbon steel rods of 12 mm diameter and AISI 304 grade austenitic stainless steel rods of 12 mm diameter were used to fabricate the joints. A constant speed, continuous drive friction welding machine was used to fabricate the joints. Fatigue life of the joints was evaluated conducting the experiments using rotary bending fatigue testing machine (R = -1). Applied stress vs. number of cycles to failure (S-N) curve was plotted for unnotched and notched specimens. Basquin constants, fatigue strength, fatigue notch factor and notch sensitivity factor were evaluated for the dissimilar joints. Fatigue strength of the joints is correlated with microstructure, microhardness and tensile properties of the joints.

Does generalized joint hypermobility predict joint injury in sport? A review.

LENUS (Irish Health Repository)

Donaldson, Peter R

2012-02-01

OBJECTIVE: To determine whether persons with generalized joint hypermobility have an increased risk of lower limb joint injury during sport. DATA SOURCES: PubMed, CINAHL, EMBASE, and SportDiscus were searched through February 2009, without language restrictions, using terms related to risk; hip, ankle, and knee injuries; and joint instability. Reference lists of included studies and relevant reviews were searched by hand. STUDY SELECTION: Selection criteria were peer-reviewed studies with a prospective design that used an objective scale to measure generalized joint hypermobility; the participants were engaged in sport activity, and the injury data were quantitative and based on diagnosis by a health professional, were self-reported, or resulted in time lost to athletic participation. The studies were screened by 1 researcher and checked by a second. Study methods were independently assessed by 2 investigators using the 6-point scale for prognostic studies developed by Pengel. Disagreements were resolved through discussion. Of 4841 studies identified, 18 met inclusion criteria. Of these, 8 were included in random-effects meta-analyses. DATA EXTRACTION: The data extracted by 2 reviewers included participant and sport characteristics and details of joint hypermobility and injury measurements. More detailed data for 4 investigations were obtained from the study authors. Where possible, hypermobility was defined as >\\/=4 of 9 points on the British Society of Rheumatology Scale (BSRS). MAIN RESULTS: Lower limb joint injuries (3 studies, 1047 participants) occurred in 14% of participants. Using the BSRS of joint hypermobility, any lower limb injury was not associated with hypermobility [odds ratio (OR), 1.43; 95% confidence interval (CI), 0.56-3.67]. Using the original authors\\' definitions, hypermobility was associated with risk of knee joint injuries (OR, 2.62; 95% CI, 1.04-6.58) in 5 studies. In 4 studies in which the BSRS could be used (1167 participants; incidence

Joint 3D Inversion of ZTEM Airborne and Ground MT Data with Application to Geothermal Exploration

Science.gov (United States)

Wannamaker, P. E.; Maris, V.; Kordy, M. A.

2017-12-01

ZTEM is an airborne electromagnetic (EM) geophysical technique developed by Geotech Inc® where naturally propagated EM fields originating with regional and global lightning discharges (sferics) are measured as a means of inferring subsurface electrical resistivity structure. A helicopter-borne coil platform (bird) measuring the vertical component of magnetic (H) field variations along a flown profile is referenced to a pair of horizontal coils at a fixed location on the ground in order to estimate a tensor H-field transfer function. The ZTEM method is distinct from the traditional magnetotelluric (MT) method in that the electric (E) fields are not considered because of the technological challenge of measuring E-fields in the dielectric air medium. This can lend some non-uniqueness to ZTEM interpretation because a range of conductivity structures in the earth depending upon an assumed background earth resistivity model can fit ZTEM data to within tolerance. MT data do not suffer this particular problem, but they are cumbersome to acquire in their common need for land-based transport often in near-roadless areas and for laying out and digging the electrodes and H coils. The complementary nature of ZTEM and MT logistics and resolution has motivated development of schemes to acquire appropriate amounts of each data type in a single survey and to produce an earth image through joint inversion. In particular, consideration is given to surveys where only sparse MT soundings are needed to drastically reduce the non-uniqueness associated with background uncertainty while straining logistics minimally. Synthetic and field data are analysed using 2D and 3D finite element platforms developed for this purpose. Results to date suggest that indeed dense ZTEM surveys can provide detailed heterogeneous model images with large-scale averages constrained by a modest number of MT soundings. Further research is needed in determining the allowable degree of MT sparseness and the

Experiments and kinematics analysis of a hand rehabilitation exoskeleton with circuitous joints.

Science.gov (United States)

Zhang, Fuhai; Fu, Yili; Zhang, Qinchao; Wang, Shuguo

2015-01-01

Aiming at the hand rehabilitation of stroke patients, a wearable hand exoskeleton with circuitous joint is proposed. The circuitous joint adopts the symmetric pinion and rack mechanism (SPRM) with the parallel mechanism. The exoskeleton finger is a serial mechanism composed of three closed-chain SPRM joints in series. The kinematic equations of the open chain of the finger and the closed chains of the SPRM joints were built to analyze the kinematics of the hand rehabilitation exoskeleton. The experimental setup of the hand rehabilitation exoskeleton was built and the continuous passive motion (CPM) rehabilitation experiment and the test of human-robot interaction force measurement were conducted. Experiment results show that the mechanical design of the hand rehabilitation robot is reasonable and that the kinematic analysis is correct, thus the exoskeleton can be used for the hand rehabilitation of stroke patients.

A computational model for three-dimensional jointed media with a single joint set

International Nuclear Information System (INIS)

Koteras, J.R.

1994-02-01

This report describes a three-dimensional model for jointed rock or other media with a single set of joints. The joint set consists of evenly spaced joint planes. The normal joint response is nonlinear elastic and is based on a rational polynomial. Joint shear stress is treated as being linear elastic in the shear stress versus slip displacement before attaining a critical stress level governed by a Mohr-Coulomb faction criterion. The three-dimensional model represents an extension of a two-dimensional, multi-joint model that has been in use for several years. Although most of the concepts in the two-dimensional model translate in a straightforward manner to three dimensions, the concept of slip on the joint planes becomes more complex in three dimensions. While slip in two dimensions can be treated as a scalar quantity, it must be treated as a vector in the joint plane in three dimensions. For the three-dimensional model proposed here, the slip direction is assumed to be the direction of maximum principal strain in the joint plane. Five test problems are presented to verify the correctness of the computational implementation of the model

76 FR 59134 - Medicare and Medicaid Programs; Approval of the Joint Commission's Continued Deeming Authority...

Science.gov (United States)

2011-09-23

... address the requirement that physician assistants, nurse practitioners, or clinical nurse specialists.... SUMMARY: This notice announces our decision to approve the Joint Commission for continued recognition as a... complaints against accredited facilities. ++ Survey review and decision-making process for accreditation. A...

ac conductivity of a one-dimensional site-disordered lattice

International Nuclear Information System (INIS)

Albers, R.C.; Gubernatis, J.E.

1978-01-01

We report the results of a numerical study of the ac conductivity for the Anderson model of a one-dimensional, site-disordered system of 400 atoms. For different degrees of disorder, we directly diagonalized the Anderson Hamiltonian, used the Kubo-Greenwood formula to evaluate the conductivity, and then averaged the conductivity over 12 configurations. We found that the dominant frequency dependence of the conductivity consisted of a single peak which shifted to higher frequency and decreased in overall magnitude as the disorder was increased. The joint density of states and the eigenstate localization were also computed and are discussed in connection with our results

The joint flanker effect and the joint Simon effect: On the comparability of processes underlying joint compatibility effects.

Science.gov (United States)

Dittrich, Kerstin; Bossert, Marie-Luise; Rothe-Wulf, Annelie; Klauer, Karl Christoph

2017-09-01

Previous studies observed compatibility effects in different interference paradigms such as the Simon and flanker task even when the task was distributed across two co-actors. In both Simon and flanker tasks, performance is improved in compatible trials relative to incompatible trials if one actor works on the task alone as well as if two co-actors share the task. These findings have been taken to indicate that actors automatically co-represent their co-actor's task. However, recent research on the joint Simon and joint flanker effect suggests alternative non-social interpretations. To which degree both joint effects are driven by the same underlying processes is the question of the present study, and it was scrutinized by manipulating the visibility of the co-actor. While the joint Simon effect was not affected by the visibility of the co-actor, the joint flanker effect was reduced when participants did not see their co-actors but knew where the co-actors were seated. These findings provide further evidence for a spatial interpretation of the joint Simon effect. In contrast to recent claims, however, we propose a new explanation of the joint flanker effect that attributes the effect to an impairment in the focusing of spatial attention contingent on the visibility of the co-actor.

Joint enterprise and the role of the intermediator

DEFF Research Database (Denmark)

Bjørn, Pernille; Simonsen, Jesper

2005-01-01

, by analyzing the failure of inte-grating groupware into two global virtual teams within industry. We present an empirically driven interpretive case study conducted in a large distributed global or-ganization. Based on the empirical observations, we reveal two organizational factors challenging the inte......-gration process: The importance of joint enterprise and the role of the intermediator....

A Modelling Method of Bolt Joints Based on Basic Characteristic Parameters of Joint Surfaces

Science.gov (United States)

Yuansheng, Li; Guangpeng, Zhang; Zhen, Zhang; Ping, Wang

2018-02-01

Bolt joints are common in machine tools and have a direct impact on the overall performance of the tools. Therefore, the understanding of bolt joint characteristics is essential for improving machine design and assembly. Firstly, According to the experimental data obtained from the experiment, the stiffness curve formula was fitted. Secondly, a finite element model of unit bolt joints such as bolt flange joints, bolt head joints, and thread joints was constructed, and lastly the stiffness parameters of joint surfaces were implemented in the model by the secondary development of ABAQUS. The finite element model of the bolt joint established by this method can simulate the contact state very well.

Sacroiliac joint pain: Prospective, randomised, experimental and comparative study of thermal radiofrequency with sacroiliac joint block.

Science.gov (United States)

Cánovas Martínez, L; Orduña Valls, J; Paramés Mosquera, E; Lamelas Rodríguez, L; Rojas Gil, S; Domínguez García, M

2016-05-01

To compare the analgesic effects between the blockade and bipolar thermal radiofrequency in the treatment of sacroiliac joint pain. Prospective, randomised and experimental study conducted on 60 patients selected in the two hospitals over a period of nine months, who had intense sacroiliac joint pain (Visual Analogue Scale [VAS]>6) that lasted more than 3 months. Patients were randomised into three groups (n=20): Group A (two intra-articular sacroiliac injections of local anaesthetic/corticosteroid guided by ultrasound in 7 days). Group B: conventional bipolar radiofrequency "palisade". Target points were the lateral branch nerves of S1, S2, and S3, distance needles 1cm. Group C: modified bipolar radiofrequency "palisade" (needle distance >1cm). Patients were evaluated at one month, three months, and one year. Demographic data, VAS reduction, and side effects of the techniques were assessed. One month after the treatment, pain reduction was >50% in the three groups PDolor. Publicado por Elsevier España, S.L.U. All rights reserved.

Effect of joint mobilization on the H Reflex amplitude in people with spasticity

OpenAIRE

Pérez Parra, Julio Ernesto; Henao Lema, Claudia Patricia

2011-01-01

Objective: To determine the effect of ankle joint mobilization on the H reflex amplitude of thesoleus muscle in people with spasticity. Materials and methods: A quasi-experimental study withcrossover design and simple masking was conducted in 24 randomized subjects to initiate thecontrol or experimental group. Traction and rhythmic oscillation were applied for five minutesto the ankle joint. H wave amplitude changes of Hoffmann reflex (electrical equivalent of themonosynaptic spinal reflex) w...

Nano Enabled Thermo-Mechanical Materials in Adhesive Joints: A New Paradigm to Materials Functionality (Preprint)

National Research Council Canada - National Science Library

Roy, Ajit K; Ganguli, Sabyasachi; Sihn, Sangwook; Qu, Liangti; Dai, Liming

2006-01-01

One of the barriers in achieving adequate through-thickness thermal conductivity in composite materials and also in composite joints is the extremely low thermal conductivity of resins (polymer) or adhesives (typically 0.3 W/mK...

Study of the Peak Shear Strength of a Cement-Filled Hard Rock Joint

Science.gov (United States)

She, Cheng-Xue; Sun, Fu-Ting

2018-03-01

The peak shear strength of a cement-filled hard rock joint is studied by theoretical analysis and laboratory testing. Based on the concept of the shear resistance angle, by combining the statistical method and fractal theory, three new parameters are proposed to characterize the three-dimensional joint morphology, reflecting the effects of the average roughness, multi-scale asperities and the dispersion degree of the roughness distribution. These factors are independent of the measurement scale, and they reflect the anisotropy of the joint roughness. Compressive shear tests are conducted on cement-filled joints. Because joints without cement can be considered special cement-filled joints in which the filling degree of cement is zero, they are also tested. The cement-filled granite joint fails primarily along the granite-cement interfaces. The filling degree of cement controls the joint failure and affects its mechanical behaviour. With a decrease in the filling degree of cement, the joint cohesion decreases; however, the dilatancy angle and the basic friction angle of the interface increase. As the filling degree approaches zero, the cohesion approaches zero, while the dilatancy angle and the basic friction angle increase to those of the joint without cement. A set of formulas is proposed to evaluate the peak shear strength of the joints with and without cement. The formulas are shown to be reasonable by comparison with the tested peak shear strength, and they reflect the anisotropy of the strength. This research deepens the understanding of cement-filled joints and provides a method to evaluate their peak shear strength.

Joint ventures

DEFF Research Database (Denmark)

Sørensen, Karsten Engsig

Afhandlingen analysere de konkurrenceretlige og selskabsretlige regler som er bestemmende for hvordan et joint venture samarbejde er struktureret......Afhandlingen analysere de konkurrenceretlige og selskabsretlige regler som er bestemmende for hvordan et joint venture samarbejde er struktureret...

Main benefits from 30 years of joint projects in nuclear safety

International Nuclear Information System (INIS)

Thadani, Ashok; Teschendorff, Victor; Vitanza, Carlo; Hrehor, Miroslav

2012-01-01

One of the major achievements of the OECD Nuclear Energy Agency (NEA) is the knowledge it has helped to generate through the organisation of joint international research projects. Such projects, primarily in the areas of nuclear safety and radioactive waste management, enable interested countries, on a cost-sharing basis, to pursue research or the sharing of data with respect to particular areas or issues. Over the years, more than 30 joint projects have been conducted with wide participation of member countries. The purpose of this report is to describe the achievements of the OECD/NEA joint projects on nuclear safety research that have been carried out over the past three decades, with a particular focus on thermal-hydraulics, fuel behaviour and severe accidents. It shows that the resolution of specific safety issues in these areas has greatly benefited from the joint projects' activities and results. It also highlights the added value of international co-operation for maintaining unique experimental infrastructure, preserving skills and generating new knowledge

Microseismic monitoring of columnar jointed basalt fracture activity: a trial at the Baihetan Hydropower Station, China

Science.gov (United States)

Chen, Bing-Rui; Li, Qing-Peng; Feng, Xia-Ting; Xiao, Ya-Xun; Feng, Guang-Liang; Hu, Lian-Xing

2014-10-01

Severe stress release has occurred to the surrounding rocks of the typically columnar jointed basalt after excavation at the Baihetan Hydropower Station, Jinsha River, China, where cracking, collapse, and other types of failure may take place occasionally due to relaxation fracture. In order to understand the relaxation fracture characteristics of the columnar jointed basalt in the entire excavation process at the diversion tunnel of the Baihetan Hydropower Station, real-time microseismic monitoring tests were performed. First, the applicability of a geophone and accelerometer was analyzed in the columnar jointed basalt tunnel, and the results show that the accelerometer was more applicable to the cracking monitoring of the columnar jointed basalt. Next, the waveform characteristics of the microseismic signals were analyzed, and the microseismic signals were identified as follows: rock fracture signal, drilling signal, electrical signal, heavy vehicle passing signal, and blast signal. Then, the attenuation characteristics of the microseismic signals in the columnar jointed basalt tunnel were studied, as well as the types and characteristics of the columnar jointed basalt fracture. Finally, location analysis was conducted on the strong rock fracture events, in which four or more sensors were triggered, to obtain the temporal and spatial evolution characteristics and laws of the columnar jointed basalt relaxation fracture after excavation. The test results are not only of important reference value to the excavation and support of diversion tunnel at the Baihetan Hydropower Station, but also of great referential significance and value to the conduction of similar tests.

An in-fiber Bragg grating sensor for contact force and stress measurements in articular joints

International Nuclear Information System (INIS)

Dennison, Christopher R; Wild, Peter M; Wilson, David R; Gilbart, Michael K

2010-01-01

We present an in-fiber Bragg grating-based sensor (240 µm diameter) for contact force/stress measurements in articular joints. The contact force sensor and another Bragg grating-based pressure sensor (400 µm diameter) are used to conduct the first simultaneous measurements of contact force/stress and fluid pressure in intact cadaveric human hips. The contact force/stress sensor addresses limitations associated with stress-sensitive films, the current standard tools for contact measurements in joints, including cartilage modulus-dependent sensitivity of films and the necessity to remove biomechanically relevant anatomy to implant the films. Because stress-sensitive films require removal of anatomy, it has been impossible to validate the mechanical rationale underlying preventive or corrective surgeries, which repair these anatomies, by conducting simultaneous stress and pressure measurements in intact hips. Methods are presented to insert the Bragg grating-based sensors into the joint, while relevant anatomy is left largely intact. Sensor performance is predicted using numerical models and the predicted sensitivity is verified through experimental calibrations. Contact force/stress and pressure measurements in cadaveric joints exhibited repeatability. With further validation, the Bragg grating-based sensors could be used to study the currently unknown relationships between contact forces and pressures in both healthy and degenerated joints

Management of pain secondary to temporomandibular joint syndrome with peripheral nerve stimulation.

Science.gov (United States)

Rodriguez-Lopez, Manuel J; Fernandez-Baena, Mariano; Aldaya-Valverde, Carlos

2015-01-01

Temporomandibular joint syndrome, or Costen syndrome, is a clinically diagnosed disorder whose most common symptoms include joint pain and clicking, difficulty opening the mouth, and temporomandibular joint discomfort. The temporomandibular joint (TMJ) is supplied by the auriculotemporal nerve, a collateral branch of the mandibular nerve (the V3 branch of the trigeminal nerve). The aim of this study is to assess the effectiveness and safety of permanent peripheral nerve stimulation to relieve TMJ pain. This case series is a prospective study. Pain Unit of a regional universitary hospital. The study included 6 female patients with temporomandibular pain lasting from 2 to 8 years that did not respond to intraarticular local anesthetic and corticoid injections. After a positive diagnostic block test, the patients were implanted with quadripolar or octapolar leads in the affected preauricular region for a 2-week stimulation test phase, after which the leads were connected to a permanent implanted pulse generator. Results of the visual analog scale, SF-12 Health Survey, Brief Pain Inventory, and drug intake were recorded at baseline and at 4, 12, and 24 weeks after the permanent implant. Five out of 6 patients experienced pain relief exceeding 80% (average 72%) and received a permanent implant. The SF-12 Health Survey results were very positive for all specific questions, especially items concerning the physical component. Patients reported returning to normal physical activity and rest at night. Four patients discontinued their analgesic medication and 1 patient reduced their gabapentin dose by 50%. Sample size; impossibility of placebo control. Patients affected with TMJ syndrome who do not respond to conservative treatments may find a solution in peripheral nerve stimulation, a simple technique with a relatively low level of complications.

A New Method for Determination of Joint Roughness Coefficient of Rock Joints

Directory of Open Access Journals (Sweden)

Shigui Du

2015-01-01

Full Text Available The joint roughness coefficient (JRC of rock joints has the characteristic of scale effect. JRC measured on small-size exposed rock joints should be evaluated by JRC scale effect in order to obtain the JRC of actual-scale rock joints, since field rock joints are hardly fully exposed or well saved. Based on the validity analysis of JRC scale effect, concepts of rate of JRC scale effect and effective length of JRC scale effect were proposed. Then, a graphic method for determination of the effective length of JRC scale effect was established. Study results show that the JRC of actual-scale rock joints can be obtained through a fractal model of JRC scale effect according to the statistically measured results of the JRC of small-size partial exposed rock joints and by the selection of fractal dimension of JRC scale effect and the determination of effective length of JRC scale effect.

Olecranon orientation as an indicator of elbow joint angle in the stance phase, and estimation of forelimb posture in extinct quadruped animals.

Science.gov (United States)

Fujiwara, Shin-Ichi

2009-09-01

Reconstruction of limb posture is a challenging task in assessing functional morphology and biomechanics of extinct tetrapods, mainly because of the wide range of motions possible at each limb joint and because of our poor knowledge of the relationship between posture and musculoskeletal structure, even in the extant taxa. This is especially true for extinct mammals such as the desmostylian taxa Desmostylus and Paleoparadoxia. This study presents a procedure that how the elbow joint angles of extinct quadruped mammals can be inferred from osteological characteristics. A survey of 67 dried skeletons and 113 step cycles of 32 extant genera, representing 25 families and 13 orders, showed that the olecranon of the ulna and the shaft of the humerus were oriented approximately perpendicular to each other during the stance phase. At this angle, the major extensor muscles maximize their torque at the elbow joint. Based on this survey, I suggest that olecranon orientation can be used for inferring the elbow joint angles of quadruped mammals with prominent olecranons, regardless of taxon, body size, and locomotor guild. By estimating the elbow joint angle, it is inferred that Desmostylus would have had more upright forelimbs than Paleoparadoxia, because their elbow joint angles during the stance phase were approximately 165 degrees and 130 degrees , respectively. Difference in elbow joint angles between these two genera suggests possible differences in stance and gait of these two mammals. Copyright 2009 Wiley-Liss, Inc.

Data Processing Procedures and Methodology for Estimating Trip Distances for the 1995 American Travel Survey (ATS)

Energy Technology Data Exchange (ETDEWEB)

Hwang, H.-L.; Rollow, J.

2000-05-01

The 1995 American Travel Survey (ATS) collected information from approximately 80,000 U.S. households about their long distance travel (one-way trips of 100 miles or more) during the year of 1995. It is the most comprehensive survey of where, why, and how U.S. residents travel since 1977. ATS is a joint effort by the U.S. Department of Transportation (DOT) Bureau of Transportation Statistics (BTS) and the U.S. Department of Commerce Bureau of Census (Census); BTS provided the funding and supervision of the project, and Census selected the samples, conducted interviews, and processed the data. This report documents the technical support for the ATS provided by the Center for Transportation Analysis (CTA) in Oak Ridge National Laboratory (ORNL), which included the estimation of trip distances as well as data quality editing and checking of variables required for the distance calculations.

Helicopter electromagnetic and magnetic geophysical survey data, portions of the North Platte and South Platte Natural Resources Districts, western Nebraska, May 2009

Science.gov (United States)

Smith, B.D.; Abraham, J.D.; Cannia, J.C.; Minsley, B.J.; Deszcz-Pan, M.; Ball, L.B.

2010-01-01

This report is a release of digital data from a helicopter electromagnetic and magnetic survey that was conducted during June 2009 in areas of western Nebraska as part of a joint hydrologic study by the North Platte Natural Resource District (NRD), South Platte NRD, and U.S. Geological Survey (USGS). Flight lines for the survey totaled 937 line kilometers (582 line miles). The objective of the contracted survey, conducted by Fugro Airborne, Ltd., is to improve the understanding of the relation between surface-water and groundwater systems critical to developing groundwater models used in management programs for water resources. A unique aspect of the survey is the flight line layout. One set of flight lines was flown in a zig-zag pattern extending along the length of the previously collected airborne data. The success of this survey design depended on a well-understood regional hydrogeologic framework and model developed by the Cooperative Hydrologic Study of the Platte River Basin and the airborne geophysical data collected in 2008. Resistivity variations along lines could be related to this framework. In addition to these lines, more traditional surveys consisting of parallel flight lines, separated by about 400 meters were carried out for three blocks in the North Platte NRD, the South Platte NRD and in the area of Crescent Lakes. These surveys helped to establish the spatial variations of the resistivity of hydrostratigraphic units. An additional survey was flown over the Crescent Lake area. The objective of this survey, funded by the USGS Office of Groundwater, was to map shallow hydrogeologic features of the southwestern part of the Sand Hills that contain a mix of fresh to saline lakes.

SEALING LARGE-DIAMETER CAST-IRON PIPE JOINTS UNDER LIVE CONDITIONS

Energy Technology Data Exchange (ETDEWEB)

Kiran M. Kothari; Gerard T. Pittard

2005-07-01

Utilities in the U.S. operate over 75,000 km (47,000 miles) of old cast-iron pipes for gas distribution. Bell-and-spigot joints that connect pipe sections together tend to leak as these pipes age. Current repair practices are costly and highly disruptive. The objective of this program is to design, test and commercialize a robotic system capable of sealing multiple castiron bell and spigot joints from a single pipe entry point. The proposed system will perform repairs with the pipe in service by traveling through the pipe, cleaning each joint surface, and installing a stainless-steel sleeve lined with an epoxy-impregnated felt across the joint. This approach will save considerable time and labor, minimize excavation, avoid traffic disruption, and eliminate any requirement to interrupt service to customers (which would result in enormous expense to utilities). Technical challenges include: (1) repair sleeves must compensate for diametric variation and eccentricity of old cast-iron pipes; (2) the assembly must travel long distances through pipes containing debris; (3) the pipe wall must be effectively cleaned in the immediate area of the joint to assure good bonding of the sleeve; and (4) an innovative bolt-on entry fitting is required to conduct safe repair operations on live mains.

Stair ascent with an innovative microprocessor-controlled exoprosthetic knee joint.

Science.gov (United States)

Bellmann, Malte; Schmalz, Thomas; Ludwigs, Eva; Blumentritt, Siegmar

2012-12-01

Climbing stairs can pose a major challenge for above-knee amputees as a result of compromised motor performance and limitations to prosthetic design. A new, innovative microprocessor-controlled prosthetic knee joint, the Genium, incorporates a function that allows an above-knee amputee to climb stairs step over step. To execute this function, a number of different sensors and complex switching algorithms were integrated into the prosthetic knee joint. The function is intuitive for the user. A biomechanical study was conducted to assess objective gait measurements and calculate joint kinematics and kinetics as subjects ascended stairs. Results demonstrated that climbing stairs step over step is more biomechanically efficient for an amputee using the Genium prosthetic knee than the previously possible conventional method where the extended prosthesis is trailed as the amputee executes one or two steps at a time. There is a natural amount of stress on the residual musculoskeletal system, and it has been shown that the healthy contralateral side supports the movements of the amputated side. The mechanical power that the healthy contralateral knee joint needs to generate during the extension phase is also reduced. Similarly, there is near normal loading of the hip joint on the amputated side.

TRANSFER OF MARKETING KNOWLEDGE IN THAI INTERNATIONAL JOINT VENTURE FIRMS

Directory of Open Access Journals (Sweden)

Osman Mohamad

2010-07-01

Full Text Available The focus of this study is the transfer of marketing knowledge within Thai joint venture firms. The perspectives of Thai managers were surveyed using a structured instrument. The analysis identifies seven dimensions of marketing management knowledge: promotion management, price management, logistics management, product innovation management, strategic marketing management, cross-cultural management, and target marketing management. The incidence of transfer is highest for activities in strategic marketing management, followed by price management. Transfer in product innovation management and target marketing management tends to vary with the age of the joint venture. Joint venture firms with foreign partners originating from Western, advanced, industrialised nations recorded the highest incidence of knowledge transfer occurring within product innovation management. This trend also holds true for the management of promotion activities. The incidence of transfer in target marketing management is lowest among firms with foreign partners from neighbouring nations. The incidence of knowledge transfer within product innovation and target marketing also tends to vary with the age of the joint venture. An analysis based on industry classification revealed that the transfer of knowledge regarding logistics management occurs most for firms in the manufacturing sector. In the service sector, the highest incidence of knowledge transfer within the areas of promotion management and target marketing management occurred in the agricultural sector.

Laboratory characterization of rock joints

International Nuclear Information System (INIS)

Hsiung, S.M.; Kana, D.D.; Ahola, M.P.; Chowdhury, A.H.; Ghosh, A.

1994-05-01

A laboratory characterization of the Apache Leap tuff joints under cyclic pseudostatic and dynamic loads has been undertaken to obtain a better understanding of dynamic joint shear behavior and to generate a complete data set that can be used for validation of existing rock-joint models. Study has indicated that available methods for determining joint roughness coefficient (JRC) significantly underestimate the roughness coefficient of the Apache Leap tuff joints, that will lead to an underestimation of the joint shear strength. The results of the direct shear tests have indicated that both under cyclic pseudostatic and dynamic loadings the joint resistance upon reverse shearing is smaller than that of forward shearing and the joint dilation resulting from forward shearing recovers during reverse shearing. Within the range of variation of shearing velocity used in these tests, the shearing velocity effect on rock-joint behavior seems to be minor, and no noticeable effect on the peak joint shear strength and the joint shear strength for the reverse shearing is observed

Forced-air warming discontinued: periprosthetic joint infection rates drop

Directory of Open Access Journals (Sweden)

Scott D. Augustine

2017-06-01

Full Text Available Several studies have shown that the waste heat from forced-air warming (FAW escapes near the floor and warms the contaminated air resident near the floor. The waste heat then forms into convection currents that rise up and contaminate the sterile field above the surgical table. It has been shown that a single airborne bacterium can cause a periprosthetic joint infection (PJI following joint replacement surgery. We retrospectively compared PJI rates during a period of FAW to a period of air-free conductive fabric electric warming (CFW at three hospitals. Surgical and antibiotic protocols were held constant. The pooled multicenter data showed a decreased PJI rate of 78% following the discontinuation of FAW and a switch to air-free CFW (n=2034; P=0.002. The 78% reduction in joint implant infections observed when FAW was discontinued suggests that there is a link between the waste FAW heat and PJIs.

Methods used to conduct the pan-European Union survey on consumer attitudes to physical activity, body weight and health.

Science.gov (United States)

Kearney, J M; Kearney, M J; McElhone, S; Gibney, M J

1999-03-01

The purpose of conducting this survey was to identify data on consumer attitudes towards and beliefs about physical activity, body weight and health among the 15 countries of the EU. A cross-sectional study to get a picture of the attitudes to physical activity, body weight and health in the EU. For this, it was considered important that samples be nationally representative so that inferences drawn from the data could be applied to the population in each country as well as to the EU population as a whole. Using a non-probability sampling method employing quota controls (and the national weight) we obtained large sample sizes from each country which were nationally representative in terms of the variables age, sex and regional distribution. To ensure samples were truly nationally representative a national weight was used when analysing the data using the same characteristics as those used to define quotas. When examining pooled estimates for the total EU sample a population weight was applied. In total, 15,239 subjects aged 15 years and upwards in the EU completed the survey. This article gives details on the methods used in carrying out the survey from design of the questionnaire to sample selection, questionnaire administration and analysis of the data. The methods and their limitations are discussed.

A 5-year profile of the incidence of total joint replacement in South ...

African Journals Online (AJOL)

During this period there was a 28% increase in the number of TJRs performed annually with an average increase of 20% in total hip replacements and 40% in total knee replacements. The number of surgeons involved in joint replacement during the survey period decreased by 7% in state-subsidised institutions but ...

THE RELATIONSHIP BETWEEN TEMPOROMANDIBULAR-JOINT MOBILITY AND PERIPHERAL JOINT MOBILITY RECONSIDERED

NARCIS (Netherlands)

Dijkstra, P.U.; DEBONT, L.G.M.; VANDERWEELE, L.T.; Boering, G.

The purpose of this paper was to study the relationship between temporomandibular joint (TMJ) mobility and mobility of joints and to study the general character of joint mobility in 83 subjects, 55 females and 28 males (mean age 26.7, range 13-46 years). The subjects were recruited from the

Dual joint space arthrography in temporomandibular joint disorders: Comparison with single inferior joint space arthrography

Energy Technology Data Exchange (ETDEWEB)

Choi, Hyung Sik; Chang, Duk Soo; Lee, Kyung Soo; Kim, Woo Sun; Sung, Jung Ho; Jun, Young Hwan [Capital Armed Forces General Hospital, Seoul (Korea, Republic of)

1989-02-15

The temporomandibular joint(TMJ) is really a complex of two synovial space separated by fibrocartilaginous disc. Single inferior joint space arthrography is commonly performed for evaluation of TMJ disorders, which is known to be superior in demonstrating joint dynamics. But it reveals only the inferior surface of the disc. Therefore, dual space arthrography is superior to demonstrate the soft tissue anatomic feature of the joint such as disc position and shape. Authors performed 83 TMJ arthrograms in TMJ problems. Initially, the inferior joint space was done and then the superior space was sequentially contrasted. The follow results were noted: 1. In all cases, dual space arthrography revealed accurate disc shape and positions. 2. Concordant findings between the two techniques: 68 cases (82%). Discordance between the two techniques: 15 cases (18%) 3. Possible causes of discordance between inferior and dual space arthrography. a) Normal varians of anterior recess: 3 cases b) Posterior disc displacement: 4 cases c) Influence of the patient's head position change :4 cases d) False perforation: 2 cases e) Reduction change: 2 cases 4. In 5 cases with anterior displacement, dual space arthrography gave additional findings such as adhesion within the superior space, which could not be evaluated by single inferior space.

Conducting health survey research in a deep rural South African community: challenges and adaptive strategies.

Science.gov (United States)

Casale, Marisa; Lane, Tyler; Sello, Lebo; Kuo, Caroline; Cluver, Lucie

2013-04-24

In many parts of the developing world, rural health requires focused policy attention, informed by reliable, representative health data. Yet there is surprisingly little published material to guide health researchers who face the unique set of hurdles associated with conducting field research in remote rural areas. In this paper we provide a detailed description of the key challenges encountered during health survey field research carried out in 2010 in a deep rural site in KwaZulu-Natal, South Africa. The aim of the field research was to collect data on the health of children aged 10 to 17 years old, and their primary adult caregivers, as part of a larger national health survey; the research was a collaboration between several South African and foreign universities, South African national government departments, and various NGO partners. In presenting each of the four fieldwork challenges encountered on this site, we describe the initial planning decisions made, the difficulties faced when implementing these in the field, and the adaptive strategies we used to respond to these challenges. We reflect on learnings of potential relevance for the research community. Our four key fieldwork challenges were scarce research capacity, staff relocation tensions, logistical constraints, and difficulties related to community buy-in. Addressing each of these obstacles required timely assessment of the situation and adaptation of field plans, in collaboration with our local NGO partner. Adaptive strategies included a greater use of local knowledge; the adoption of tribal authority boundaries as the smallest geopolitical units for sampling; a creative developmental approach to capacity building; and planned, on-going engagement with multiple community representatives. We argue that in order to maintain high scientific standards of research and manage to 'get the job done' on the ground, it is necessary to respond to fieldwork challenges that arise as a cohesive team, with timely

Immediate effects of neuromuscular joint facilitation intervention after anterior cruciate ligament reconstruction.

Science.gov (United States)

Wang, Lei

2016-07-01

[Purpose] The aim of this study was to examine the immediate effects of neuromuscular joint facilitation (NJF) on the functional activity level after rehabilitation of anterior cruciate ligament (ACL) reconstruction. [Subjects and Methods] Ten young subjects (8 males and 2 females) who underwent ACL reconstruction were included in the study. The subjects were divided into two groups, namely, knee joint extension muscle strength training (MST) group and knee joint extension outside rotation pattern of NJF group. Extension strength was measured in both groups before and after the experiment. Surface electromyography (sEMG) of the vastus medialis and vastus lateralis muscles and joint position error (JPE) test of the knee joint were also conducted. [Results] JPE test results and extension strength measurements in the NJF group were improved compared with those in the MST group. Moreover, the average discharge of the vastus medialis and vastus lateralis muscles on sEMG in the NJF group was significantly increased after MST and NJF treatments. [Conclusion] The obtained results suggest that NJF training in patients with ACL reconstruction can improve knee proprioception ability and muscle strength.

Joint Electromagnetic Spectrum Management Operations

Science.gov (United States)

2012-03-20

promulgate command-specific policy and guidance for EMS use, the joint restricted frequency list (JRFL) process, the joint communications–electronics...joint communications–electronics operating instructions (JCEOI) and joint restricted frequency list (JRFL). Examples of FM include providing the...joint restricted frequency list Figure III-4. Joint Frequency Management Office Spectrum Management Process Chapter III III-10 JP 6-01 assignments

Basic survey for Joint Implementation on West Pacific Petrochemical Co., Ltd., Dalian, China. Energy conservation project for West Pacific Oil Refinery

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of reducing greenhouse effect gas emissions, a potential survey was conducted of energy conservation at West Pacific Oil Refinery, Dalian, China. In the survey, studies were made of energy conservation by introducing the hydrogen recovery equipment and the gas turbine generation system using exhaust gas as fuel, and of potentiality of reducing greenhouse effect gas emissions. As a result of the survey, a gas turbine generator of about 29MW using the surplus gas as fuel can be installed. By this, approximately 71% of the power used in refinery is to be supplied as against 25% of the power presently used. The technology was proposed on the hydrogen recovery equipment and the gas turbine generation system to discuss the revision plan with the Chinese partner. When this project is realized, the reduction amount of CO2 will be 136,000 ton/y. The Chinese side highly estimated not only the remarkable reduction in CO2, but the reduction in purchased power from outside which is to be brought by realization of this project. (NEDO)

Active metal brazing of titanium to high-conductivity carbon-based sandwich structures

International Nuclear Information System (INIS)

Singh, M.; Morscher, Gregory N.; Shpargel, Tarah P.; Asthana, Rajiv

2008-01-01

Reactive brazing technology was developed and processing parameters were optimized for the bonding of titanium tubes, graphite foam, and high-conductivity carbon-carbon composite face sheets using the active braze Cusil-ABA paste and foils. The microstructure and composition of the joints, examined using scanning electron microscopy coupled with energy-dispersive spectroscopy, showed good bonding and braze penetration in all systems when braze paste was used. The hardness values of the brazed joints were consistent for the different specimen stacking configurations. Mechanical testing of Ti tube/foam/C-C composite structures both in tension and shear showed that failure always occurred in the foam material demonstrating that the brazed joint was sufficient for these types of sandwich structures

Joint diseases

International Nuclear Information System (INIS)

Weissman, S.D.

1989-01-01

The authors discuss how x-ray examination is essential in the diagnosis and evaluation of the arthritides. Most arthritides are first suspected by the clinician, and x-ray evaluation of these entities along with laboratory testing is important for confirmation of the clinical diagnosis and in staging of the disease process. Several arthritides are often diagnosed first by the podiatrist on x-ray evaluation, including pseudogout, ankylosing spondylitis, early rheumatoid arthritis, degenerative joint disease, and tuberculosis of bone. The joint responds to insult in only a limited number of ways that become apparent on x-ray. The soft tissues surrounding the joint, the articulating bones, and alignment of the joint space may all be involved by the arthritic process. On roentgenographic examination, the soft tissues must be examined for edema, masses, calcifications, and atrophy. The articulating bones must be examined for demineralization, erosions, osteophytes, periosteal reaction, cysts and sclerosis

Critical joints in large composite primary aircraft structures. Volume 2: Technology demonstration test report

Science.gov (United States)

Bunin, Bruce L.

1985-01-01

A program was conducted to develop the technology for critical structural joints in composite wing structure that meets all the design requirements of a 1990 commercial transport aircraft. The results of four large composite multirow bolted joint tests are presented. The tests were conducted to demonstrate the technology for critical joints in highly loaded composite structure and to verify the analytical methods that were developed throughout the program. The test consisted of a wing skin-stringer transition specimen representing a stringer runout and skin splice on the wing lower surface at the side of the fuselage attachment. All tests were static tension tests. The composite material was Toray T-300 fiber with Ciba-Geigy 914 resin in 10 mil tape form. The splice members were metallic, using combinations of aluminum and titanium. Discussions are given of the test article, instrumentation, test setup, test procedures, and test results for each of the four specimens. Some of the analytical predictions are also included.

A survey of joint activities and travel of household members in the Greater Copenhagen Metropolitan Region

DEFF Research Database (Denmark)

Thorhauge, Mikkel; Vuk, Goran; Kaplan, Sigal

2012-01-01

and family quality time, within a daily schedule. The current study unveils the joint activity and travel patterns of household members in the Copenhagen area, as part of the ACTUM research project, funded by the Danish Strategic Research Council, for the development of a new generation of activity......The traditional approach for modeling transport-related choices in Denmark refers to individual decision makers. However, in daily activities and travel choices individuals function according to the commitments as family members, and thus their choices derive from the welfare needs of other family...... members. A family-based approach enables to capture intra-household interactions and the priorities of household members in scheduling their daily activities, thus adding to the realism and the predictive strength of transport models. Joint activities and travel occur in order to maximize efficiency...

[Diagnostic test scale SI5: Assessment of sacroiliac joint dysfunction].

Science.gov (United States)

Acevedo González, Juan C; Quintero Oliveros, Silvia

2015-01-01

Sacroiliac joint dysfunction is a known cause of low back pain. We think that a diagnostic score scale (SI5) may be performed to assess diagnostic utility of clinical signs of sacroiliac joint dysfunction. The primary aim of the present study was to conduct the pilot study of our new diagnostic score scale, the SI5, for sacroiliac joint syndrome. We reviewed the literature on clinical characteristics, diagnostic tests and imaging most commonly used in diagnosing sacroiliac joint dysfunction. Our group evaluated the diagnostic utility of these aspects and we used those considered most representative to develop the SI5 diagnostic scale. The SI5 scale was applied to 22 patients with low back pain; afterwards, the standard test for diagnosing this pathology (selective blockage of the SI joint) was also performed on these patients. The sensitivity and specificity for each sign were also assessed and the diagnostic scale called SI5 was then proposed, based on these data. The most sensitive clinical tests for diagnosing SI joint dysfunction were 2 patient-reported clinical characteristics, the Laguerre Test, sacroiliac rocking test and Yeomans test (greater than 80% sensitivity). The tests with greatest diagnostic specificity (>80%) were the Lewitt test, Piedallu test and Gillet test. The proposed SI5 test score scale showed sensitivity of 73% and specificity of 71%. Sacroiliac joint syndrome has been shown to produce low back pain frequently; however, the diagnostic value of examination tests for sacroiliac joint pain has been questioned by other authors. The pilot study on the SI5 diagnostic score scale showed good sensitivity and specificity. However, the process of statistical validation of the SI5 needs to be continued. Copyright © 2014 Sociedad Española de Neurocirugía. Published by Elsevier España. All rights reserved.

Design issues in studies of radon and lung cancer: Implications of the joint effect of smoking and radon

International Nuclear Information System (INIS)

Upfal, M.; Divine, G.; Siemiatycki, J.

1995-01-01

Many case-control studies have been undertaken to assess whether and to what extent residential radon exposure is a risk factor for lung cancer. Nearly all these studies have been conducted in populations including smokers and nonsmokers. In this paper, we show that, depending on the nature of the joint effect of radon and tobacco on lung cancer risk, it may be very difficult to detect a main effect due to radon in mixed smoking and nonsmoking populations. If the joint effect is closer to additive than multiplicative, the most cost-effective way to achieve adequate statistical power may be to conduct a study among never-smokers. Because the underlying joint effect is unknown, and because many studies have been carried out among mixed smoker and nonsmoker populations, it would be desirable to conduct some studies with adequate power among never-smokers only. 30 refs., 4 figs., 2 tabs

Imaging findings of charcot joint

International Nuclear Information System (INIS)

Meng Quanfei; Zhou Chunxiang; Chen Yingming; Jiang Bo

2003-01-01

Objective: To analyze the MRI characters of Charcot joint, and to evaluate the diagnostic value of X-ray, CT, and MRI on Charcot joint. Methods: Eight patients with 8 Charcot joints underwent X-ray, CT, and MR examinations. 6 of them had syringomyelia, 1 patient had injury of the spinal cord, and 1 case had diabetes. All 8 patients had sensory reduction or deficit in the sick extremities. Results: There were two types of Charcot joint, hypertrophic and atrophic. Radiographic and CT features of hypertrophic joint (n=3) showed hyperostotic osteosclerosis and mammoth osteophytes in the sick bones, periarticular ossification, and articular disorganization. Radiographic and CT features of atrophic joint (n=5) showed extensive bone resorption (destruction), periarticular debris, and articular disorganization. Main MRI features of Charcot joint included hydrarthrosis within joint capsule, thickened, loose, and elongated joint capsule with para-joint, peri-diaphysis, and inter-muscular extension in a pseudopodia pattern. The irregular joint capsule wall was presented as mild hypointensity on T 1 WI, slight hyper-intensity on T 2 WI, and was markedly enhanced after Gd-DTPA was administrated, which was considered as a characteristic manifestation of the lesion. Soft tissue mass containing hypo-intense stripes on both T 1 WI and T 2 WI was commonly noted adjacent to the involved joint. Conclusion: X-rays plain film is the first choice for the diagnosis of Charcot joint, and MRI is pretty useful in the diagnosis of Charcot joint

The U.S. Geological Survey's water resources program in New York

Science.gov (United States)

Wiltshire, Denise A.

1983-01-01

The U.S. Geological Survey performs hydrologic investigations throughout the United States to appraise the Nation's water resources. The Geological Survey began its water-resources investigations in New York in 1895. To meet the objectives of assessing New York's water resources, the Geological Survey (1) monitors the quantity and quality of surface and ground water, (2) conducts investigations of the occurrence, availability, and chemical quality of water in specific areas of the State, (3) develops methods and techniques of data-collection and interpretation, (4) provides scientific guidance to the research community, to Federal, State, and local governments, and to the public, and (5) disseminates data and results of research through reports, maps, news releases, conferences, and workshops. Many of the joint hydrologic investigations are performed by the Geological Survey in cooperation with State, county, and nonprofit organizations. The data collection network in New York includes nearly 200 gaging stations and 250 observation wells; chemical quality of water is measured at 260 sites. Data collected at these sites are published annually and are filed in the WATSTORE computer system. Some of the interpretive studies performed by the Geological Survey in New York include (1) determining the suitability of ground-water reservoirs for public-water supply in urban areas, (2) assessing geohydrologic impacts of leachate from hazardous waste sites on stream and ground-water quality, (3) evaluating the effects of precipitation quality and basin characteristics on streams and lakes, and (4) developing digital models of the hydrology of aquifers to simulate ground-water flow and the interaction between ground water and streams.

Formation of tough composite joints

International Nuclear Information System (INIS)

Brun, M.K.

1997-05-01

Joints which exhibit tough fracture behavior were formed in a composite with a Si/SiC matrix reinforced with Textron SCS-6 fibers with either boron nitride or silicon nitride fiber coatings. In composites with BN coatings fibers were aligned uniaxially, while composites with Si 3 N 4 -coated fibers had a 0/90 degree architecture. Lapped joints (joints with overlapping fingers) were necessary to obtain tough behavior. Geometrical requirements necessary to avoid brittle joint failure have been proposed. Joints with a simple overlap geometry (only a few fingers) would have to be very long in order to prevent brittle failure. Typical failure in these joints is caused by a crack propagating along the interfaces between the joint fingers. Joints of the same overall length, but with geometry changed to be symmetric about the joint centerline and with an extra shear surface exhibited tough fractures accompanied with extensive fiber pullout. The initial matrix cracking of these joints was relatively low because cracks propagated easily through the ends of the fingers. Joints with an optimized stepped sawtooth geometry produced composite-like failures with the stress/strain curves containing an elastic region followed by a region of rising stress with an increase of strain. Increasing the fiber/matrix interfacial strength from 9 to 25 MPa, by changing the fiber coating, increased matrix cracking and ultimate strength of the composite significantly. The best joints had matrix cracking stress and ultimate strength of 138 and 240 MPa, respectively. Joint failure was preceded by multiple matrix cracking in the entire composite. The high strength of the joints will permit building of structures containing joints with only a minor reduction of design stresses

Heads, Shoulders, Elbows, Knees, and Toes: Modular Gdf5 Enhancers Control Different Joints in the Vertebrate Skeleton.

Science.gov (United States)

Chen, Hao; Capellini, Terence D; Schoor, Michael; Mortlock, Doug P; Reddi, A Hari; Kingsley, David M

2016-11-01

Synovial joints are crucial for support and locomotion in vertebrates, and are the frequent site of serious skeletal defects and degenerative diseases in humans. Growth and differentiation factor 5 (Gdf5) is one of the earliest markers of joint formation, is required for normal joint development in both mice and humans, and has been genetically linked to risk of common osteoarthritis in Eurasian populations. Here, we systematically survey the mouse Gdf5 gene for regulatory elements controlling expression in synovial joints. We identify separate regions of the locus that control expression in axial tissues, in proximal versus distal joints in the limbs, and in remarkably specific sub-sets of composite joints like the elbow. Predicted transcription factor binding sites within Gdf5 regulatory enhancers are required for expression in particular joints. The multiple enhancers that control Gdf5 expression in different joints are distributed over a hundred kilobases of DNA, including regions both upstream and downstream of Gdf5 coding exons. Functional rescue tests in mice confirm that the large flanking regions are required to restore normal joint formation and patterning. Orthologs of these enhancers are located throughout the large genomic region previously associated with common osteoarthritis risk in humans. The large array of modular enhancers for Gdf5 provide a new foundation for studying the spatial specificity of joint patterning in vertebrates, as well as new candidates for regulatory regions that may also influence osteoarthritis risk in human populations.

Efficient finite element modelling for the investigation of the dynamic behaviour of a structure with bolted joints

Science.gov (United States)

Omar, R.; Rani, M. N. Abdul; Yunus, M. A.; Mirza, W. I. I. Wan Iskandar; Zin, M. S. Mohd

2018-04-01

A simple structure with bolted joints consists of the structural components, bolts and nuts. There are several methods to model the structures with bolted joints, however there is no reliable, efficient and economic modelling methods that can accurately predict its dynamics behaviour. Explained in this paper is an investigation that was conducted to obtain an appropriate modelling method for bolted joints. This was carried out by evaluating four different finite element (FE) models of the assembled plates and bolts namely the solid plates-bolts model, plates without bolt model, hybrid plates-bolts model and simplified plates-bolts model. FE modal analysis was conducted for all four initial FE models of the bolted joints. Results of the FE modal analysis were compared with the experimental modal analysis (EMA) results. EMA was performed to extract the natural frequencies and mode shapes of the test physical structure with bolted joints. Evaluation was made by comparing the number of nodes, number of elements, elapsed computer processing unit (CPU) time, and the total percentage of errors of each initial FE model when compared with EMA result. The evaluation showed that the simplified plates-bolts model could most accurately predict the dynamic behaviour of the structure with bolted joints. This study proved that the reliable, efficient and economic modelling of bolted joints, mainly the representation of the bolting, has played a crucial element in ensuring the accuracy of the dynamic behaviour prediction.

Knowledge and perceptions of couples' voluntary counseling and testing in urban Rwanda and Zambia: a cross-sectional household survey.

Directory of Open Access Journals (Sweden)

April L Kelley

2011-05-01

Full Text Available Most incident HIV infections in sub-Saharan Africa occur between cohabiting, discordant, heterosexual couples. Though couples' voluntary HIV counseling and testing (CVCT is an effective, well-studied intervention in Africa, <1% of couples have been jointly tested.We conducted cross-sectional household surveys in Kigali, Rwanda (n = 600 and Lusaka, Zambia (n = 603 to ascertain knowledge, perceptions, and barriers to use of CVCT.Compared to Lusaka, Kigali respondents were significantly more aware of HIV testing sites (79% vs. 56%; had greater knowledge of HIV serodiscordance between couples (83% vs. 43%; believed CVCT is good (96% vs. 72%; and were willing to test jointly (91% vs. 47%. Stigma, fear of partner reaction, and distance/cost/logistics were CVCT barriers.Though most respondents had positive attitudes toward CVCT, the majority were unaware that serodiscordance between cohabiting couples is possible. Future messages should target gaps in knowledge about serodiscordance, provide logistical information about CVCT services, and aim to reduce stigma and fear.

Fiscal 1999 survey report. Basic survey for promotion of joint implementations, etc. (Energy conservation measures for limekilns); 1999 nendo sekkai shoseirio no sho energy taisaku chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Most of the limekilns now in operation in China are of the old type, demanding 30% more heat than limekilns in general use for instance in Japan. The survey assesses the effect of energy conservation or greenhouse gas reduction in case the old limekilns are replaced by new ones. For the implementation of this survey, the Benxi Iron and Steel Complex in Benxi City, Liaoning Province, China, who hope that their old limekilns will be replaced, is assumed to be the site of construction. A survey is conducted on this assumption, and the effect of greenhouse gas reduction in case new limekilns are popularized in China is also assessed. Under this program, the earth kilns will be abolished, to be replaced by 600 tons/day new limekilns. However, some of the single cylinder shaft kilns are to be retained. It is concluded that fuel consumption will be reduced by 7.49 times 10{sup 3} tons/year in terms of crude oil, fuel cost by 10,120,000 yuan/year, and CO2 emissions by 23,200 tons/year. The installation will cost 991-million yen, and the investment recovery period will be 7.9 years. The amount of metallurgical lime that China produces is 10-million tons/year, of which 70% comes from the old limekilns. After completion of the replacement there will be 33 limekilns, and the need is quite great. (NEDO)

Atlantic Protected Species Assessment Aerial Surveys

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — These data sets include a compilation of aerial line-transect surveys conducted over continental shelf waters of the southeastern U.S. Surveys have been conducted...

Prevalence of Concomitant Sacroiliac joint Dysfunction in Patients With Image Proven Herniated Lumbar Discs

OpenAIRE

Salah Alalawi; Ali akbar Jafarian; Seyed Pezhman Madani; Mohammad Dadian; Keykavous Firouznia

2009-01-01

Background:Sacroiliac joint (SIJ) dysfunction is a widely known but poorly defined cause of low back pain. To our knowledge, few published studies have been conducted to evaluate systematically the prevalence and significance of concomitant sacroiliac joint dysfunction in patients with herniated lumbar discs. As concomitant SIJ dysfunction in low back pain patients is likely to respond to particular noninvasive interventions such as manipulation,improved understanding of the relationship bet...

Infant Responding to Joint Attention, Executive Processes, and Self-Regulation in Preschool Children

Science.gov (United States)

Van Hecke, Amy Vaughan; Mundy, Peter; Block, Jessica J.; Delgado, Christine E. F.; Parlade, Meaghan V.; Pomares, Yuly B.; Hobson, Jessica A.

2011-01-01

Infant joint attention is related to behavioral and social outcomes, as well as language in childhood. Recent research and theory suggests that the relations between joint attention and social-behavioral outcomes may reflect the role of executive self-regulatory processes in the development of joint attention. To test this hypothesis two- studies were conducted. The first, cross-sectional study examined the development of responding to joint attention skill (RJA) in terms of increasing executive efficiency of responding between 9 and 18 months of age. The results indicated that development of RJA was characterized by a decreased latency to shift attention in following another person’s gaze and head turn, as well as an increase in the proportion of correct RJA responses exhibited by older infants. The second study examined the longitudinal relations between 12-month measures of responding to joint attention (RJA) and 36-month attention regulation in a delay of gratification task. The results indicated that responding to joint attention at 12-months was significantly related to children’s use of three types of self-regulation behaviors while waiting for a snack reward at 36 months of age. These observations are discussed in light of a developmental theory of attention regulation and joint attention in infancy. PMID:22206892

Effects of residual stress on fatigue strength of small diameter welded pipe joint

International Nuclear Information System (INIS)

Yamashita, Tetsuo; Hattori, Takahiro; Nomoto, Toshiharu; Iida, Kunihiro; Sato, Masanobu

1996-01-01

A power plant consists of many welded components, therefore, it is essential in establishing the reliability of the power plant to maintain the reliability of all welded components. The fatigue failure caused by mechanical vibrations of small diameter welded joints, which is represented by socket welded joints, is one of the major causes of trouble for the welded parts of the power plant. Here, bending fatigue tests were conducted to investigate the fatigue strength of small diameter socket welded pipe joints. In the most cases of large diameter socket joints, a fatigue crack started from the root of the fillet weld though the stress amplitude at the root was smaller than that at the toe of fillet weld. Additionally, the fatigue strength was affected by the weld bead sequence. The residual stress was considered to be one of the important parameters governing fatigue strength, therefore, its effects were investigated. In several types of pipe joints, the local stress and residual stress distributions were calculated by finite element analysis. The residual stresses were compressive at the toe and tensile at the root of the socket welded joints. Based on these results, the effects of residual stresses on the fatigue strength are discussed for small diameter welded pipe joints in the present work

SEALING LARGE-DIAMETER CAST-IRON PIPE JOINTS UNDER LIVE CONDITIONS

Energy Technology Data Exchange (ETDEWEB)

Kiran M. Kothari; Gerard T. Pittard

2003-06-01

Utilities in the U.S. operate over 75,000 km (47,000 miles) of old cast-iron pipes for gas distribution. The bell-and-spigot joints tend to leak as these pipes age. Current repair practices are costly and highly disruptive. The objective of this program is to design, test and commercialize a robotic system capable of sealing multiple cast-iron bell and spigot joints from a single pipe entry point. The proposed system will perform repairs while the pipe remains in service by traveling through the pipe, cleaning each joint surface, and attaching a stainless-steel sleeve lined with an epoxy-impregnated felt across the joint. This approach will save considerable time and labor, avoid traffic disruption, and eliminate any requirement to interrupt service (which results in enormous expense to utilities). Technical challenges include: (1) repair sleeves must compensate for diametric variation and eccentricity of cast-iron pipes; (2) the assembly must travel long distances through pipes containing debris; (3) the pipe wall must be effectively cleaned in the immediate area of the joint to assure good bonding of the sleeve; and (4) an innovative bolt-on entry fitting is required to conduct repair operations on live mains. The development effort is divided into eleven tasks. Task 1-Program Management was previously completed. Two reports, one describing the program management plan and the other consisting of the technology assessment, were submitted to the DOE COR in the first quarter. Task 2-Establishment of Detailed Design Specifications and Task 3-Design and Fabricate Ratcheting Stainless-Steel Repair Sleeves are now well underway. First-quarter activities included conducting detailed analyses to determine the capabilities of coiled-tubing locomotion for entering and repairing gas mains and the first design iteration of the joint-sealing sleeve. The maximum horizontal reach of coiled tubing inside a pipeline before buckling prevents further access was calculated for a wide

The behavior of welded joint in steel pipe members under monotonic and cyclic loading

International Nuclear Information System (INIS)

Chang, Kyong-Ho; Jang, Gab-Chul; Shin, Young-Eui; Han, Jung-Guen; Kim, Jong-Min

2006-01-01

Most steel pipe members are joined by welding. The residual stress and weld metal in a welded joint have the influence on the behavior of steel pipes. Therefore, to accurately predict the behavior of steel pipes with a welded joint, the influence of welding residual stress and weld metal on the behavior of steel pipe must be investigated. In this paper, the residual stress of steel pipes with a welded joint was investigated by using a three-dimensional non-steady heat conduction analysis and a three-dimensional thermal elastic-plastic analysis. Based on the results of monotonic and cyclic loading tests, a hysteresis model for weld metal was formulated. The hysteresis model was proposed by the authors and applied to a three-dimensional finite elements analysis. To investigate the influence of a welded joint in steel pipes under monotonic and cyclic loading, three-dimensional finite elements analysis considering the proposed model and residual stress was carried out. The influence of a welded joint on the behavior of steel pipe members was investigated by comparing the analytical result both steel pipe with a welded joint and that without a welded joint

Bowhead whale aerial abundance survey conducted by Alaska Fisheries Science Center, National Marine Mammal Laboratory from 2011-04-19 to 2011-06-11 (NCEI Accession 0133937)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Aerial photographic surveys for bowhead whales were conducted near Point Barrow, Alaska, from 19 April to 6 June in 2011. Approximately 4,594 photographs containing...

Autonomous Sea-Ice Thickness Survey

Science.gov (United States)

2016-06-01

the conductivity of an infinitely thick slab of sea ice. Ice thickness, Hice, is then obtained by subtracting the height of the ...Thickness Survey of Sea Ice Runway” ERDC/CRREL SR-16-4 ii Abstract We conducted an autonomous survey of sea -ice thickness using the Polar rover Yeti...efficiency relative to manual surveys routinely con- ducted to assess the safety of roads and runways constructed on the sea ice. Yeti executed the

FY 1999 report on basic survey for joint implementations, etc. Basic feasibility study on energy conservation at Novolipetsk Steelworks

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The survey involves COP (Conference of the Parties) joint implementations, etc., at the Russian Novolipetsk Steelworks (NLMK) who produces crude steel at 9.9-million tons/year. A large waste heat recovery system is introduced into the NLMK for reduction in natural gas consumption and in electric power purchase. The waste heat recovery facilities involve a sintering cooler/heater, TRT (top-pressure recovery turbine), and LD (Linz-Donawitz) converter gas recovery. Energy will be saved at 1730 Tcal/year, and greenhouse gas (CO2) will be reduced at 408,000 tons/year. A total of 20.9 times 1-billion yen needs to be invested. Since energy is priced low in Russia, the investment will result in but a little economic effect. In the Russian industrial circle, however, there is a move to raise the energy price by stages to secure corporation operating funds and refurbish obsolete facilities. Accordingly, probabilities are quite high that the project proposed here will be implemented if low-interest financing is available. Talks will continue between the two parties over yen credit availability, etc. It is indispensable to construct a framework which will enable implementations in compliance with COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change). (NEDO)

Gender-related differences in lower limb alignment, range of joint motion, and the incidence of sports injuries in Japanese university athletes.

Science.gov (United States)

Mitani, Yasuhiro

2017-01-01

[Purpose] To investigate the gender-related differences in lower limb alignment, range of joint motion, and history of lower limb sports injuries in Japanese university athletes. [Subjects and Methods] The subjects were 224 Japanese university athletes (154 males and 70 females). The quadriceps angle (Q-angle), arch height index, and ranges of internal and external rotation of the hip joints were measured. History of lower limb sports injury was surveyed using a questionnaire. [Results] Females had a significantly higher Q-angle and hip joint internal rotation angle and a significantly lower arch height index than males. The survey revealed that a significantly higher proportion of females had a history of lower limb sports injuries, and that the proportion of those with a history of foot/ankle injuries was particularly high. [Conclusion] These results suggested that females experience more lower limb sports injuries than males, and that a large proportion of these injuries involve the foot/ankle. Reduced lower limb alignment and increased range of joint motion in females may be risk factors for injury because they lead to increased physical stress being exerted on the lower legs during sporting activities.

Seismic Properties of Moment-resisting Timber Joints with a Combination of Bolts and Nails

Directory of Open Access Journals (Sweden)

Awaludin A.

2011-01-01

Full Text Available Improvement of cyclic or dynamic performance of timber connections has been intensively conducted since the overall response of wooden structures is merely a function of joint performance. For a bolted joint, filling the lead-hole clearance with epoxy resin or gluing high embedding-strength materials at the interface of the individual timber member are probably the most common methods. This study presents cyclic test results of moment-resisting joints with a combination of bolts and nails. The nails were placed closer to the joint centroid than the bolts, acting as additional fasteners and were expected to improve the seismic performance of the joints. Static-cyclic test results confirmed the increase of joint stiffness and moment resistance due to the additional nails. The nails contribute to the increase of hysteretic damping significantly though pinching behavior or narrowing the hysteresis loops close to zero rotation points was still observed. The results indicated that contribution of nails or bolts on moment resistance and hysteretic damping can be superimposed.

A coupled mechanical-hydrological methodology for modeling flow in jointed rock masses using laboratory data for the joint flow model

International Nuclear Information System (INIS)

Voss, C.F.; Bastian, R.J.; Shotwell, L.R.

1986-01-01

Pacific Northwest Laboratory (PNL) currently supports the U.S. Department of Energy's Office of Civilian Radioactive Waste Management in developing and evaluating analytical methods for assessing the suitability of sites for geologic disposal of high-level radioactive waste. The research includes consideration of hydrological, geomechanical, geochemical, and waste package components and the evaluation of the degree of coupling that can occur between two or more of these components. The PNL effort and those of other research groups investing potential waste sites in the U.S. and abroad are producing a suite of computer codes to analyze the long-term performance of the proposed repository sites. This paper summarizes the ongoing research in rock mechanics at PNL involving flow through jointed rock. The objective of this research is to develop a methodology for modeling the coupled mechanical-hydrological process of flow through joints and then attempt to validate a ''simple'' model using small-scale laboratory test data as a basis for judging whether the approach has merit. This paper discusses the laboratory tests being conducted to develop a joint behavioral constitutive model for the numerical method under development and the modeling approach being considered

Fiscal 1996 survey of potential international cooperation for a long-term scenario on CO2 reduction; 1996 nendo CO2 sakugen ni kakawaru choki shinario ni kansuru kokusai kyoryoku kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For the purpose of working out a CO2 reduction scenario and a CO2 policy introduction scenario, a survey was conducted of comparisons between ten and several models which are world-known and models of the New Earth 21, potential international cooperation to be carried out in the future, etc. The survey included organizations which are developing CO2 policy evaluation models, survey reports made in the past, details of literature for the analysis and arrangement. From the result, details of the questionnaire survey and organizations to be surveyed were decided on for the questionnaire survey. Objects for the survey were 7 countries and 22 organizations, and survey items were places for information exchange, sending/receiving of researchers, exchange of input data, comparative calculation based on the common database, joint research work, economy, the carbon tax, impact, renewable energy, how to handle and think of the carbon isolation, etc. As a result of the survey, proposed were a workshop on CO2 reduction, a comparative study of simulation models, etc. 25 refs., 50 figs., 12 tabs.

CT-guided percutaneous radiofrequency denervation of the sacroiliac joint

Energy Technology Data Exchange (ETDEWEB)

Gevargez, A.; Schirp, S.; Braun, M. [Department of Radiology and Microtherapy, University of Witten/Herdecke, Bochum (Germany); Groenemeyer, D. [Department of Radiology and Microtherapy, University of Witten/Herdecke, Bochum (Germany); EFMT Development and Research Center for Microtherapy, Bochum (Germany)

2002-06-01

Defining the origin of low back pain is a challenging task. Among a variety of factors the sacroiliac joint (SIJ) is a possible pain generator, although precise diagnosis is difficult. Joint blocks may reduce pain, but are, in cases, of only temporary effect. This study was conducted to evaluate CT-guided percutaneous radiofrequency denervation of the sacroiliac joint in patients with low back pain. The procedure was performed on 38 patients who only temporarily responded to CT-guided SIJ blocks. The denervation was carried out in the posterior interosseous sacroiliac ligaments and on the dorsal rami of the fifth spinal nerve. All interventions were carried out under CT guidance as out-patient therapies. Three months after the therapy, 13 patients (34.2%) were completely free of pain. Twelve patients (31.6%) reported on a substantial pain reduction, 7 patients (18.4%) had obtained a slight and 3 patients (7.9%) no pain reduction. The data of 3 patients (7.9%) was missing. There were no intra- or postoperative complications. Computed tomography-guided percutaneous radiofrequency denervation of the sacroiliac joint appears safe and effective. The procedure may be a useful therapeutic modality, especially in patients with chronic low back pain, who only temporarily respond to therapeutic blocks. (orig.)

CT-guided percutaneous radiofrequency denervation of the sacroiliac joint

International Nuclear Information System (INIS)

Gevargez, A.; Schirp, S.; Braun, M.; Groenemeyer, D.

2002-01-01

Defining the origin of low back pain is a challenging task. Among a variety of factors the sacroiliac joint (SIJ) is a possible pain generator, although precise diagnosis is difficult. Joint blocks may reduce pain, but are, in cases, of only temporary effect. This study was conducted to evaluate CT-guided percutaneous radiofrequency denervation of the sacroiliac joint in patients with low back pain. The procedure was performed on 38 patients who only temporarily responded to CT-guided SIJ blocks. The denervation was carried out in the posterior interosseous sacroiliac ligaments and on the dorsal rami of the fifth spinal nerve. All interventions were carried out under CT guidance as out-patient therapies. Three months after the therapy, 13 patients (34.2%) were completely free of pain. Twelve patients (31.6%) reported on a substantial pain reduction, 7 patients (18.4%) had obtained a slight and 3 patients (7.9%) no pain reduction. The data of 3 patients (7.9%) was missing. There were no intra- or postoperative complications. Computed tomography-guided percutaneous radiofrequency denervation of the sacroiliac joint appears safe and effective. The procedure may be a useful therapeutic modality, especially in patients with chronic low back pain, who only temporarily respond to therapeutic blocks. (orig.)

Analytical Time-Domain Solution of Plane Wave Propagation Across a Viscoelastic Rock Joint

Science.gov (United States)

Zou, Yang; Li, Jianchun; Laloui, Lyesse; Zhao, Jian

2017-10-01

The effects of viscoelastic filled rock joints on wave propagation are of great significance in rock engineering. The solutions in time domain for plane longitudinal ( P-) and transverse ( S-) waves propagation across a viscoelastic rock joint are derived based on Maxwell and Kelvin models which are, respectively, applied to describe the viscoelastic deformational behaviour of the rock joint and incorporated into the displacement discontinuity model (DDM). The proposed solutions are verified by comparing with the previous studies on harmonic waves, which are simulated by sinusoidal incident P- and S-waves. Comparison between the predicted transmitted waves and the experimental data for P-wave propagation across a joint filled with clay is conducted. The Maxwell is found to be more appropriate to describe the filled joint. The parametric studies show that wave propagation is affected by many factors, such as the stiffness and the viscosity of joints, the incident angle and the duration of incident waves. Furthermore, the dependences of the transmission and reflection coefficients on the specific joint stiffness and viscosity are different for the joints with Maxwell and Kelvin behaviours. The alternation of the reflected and transmitted waveforms is discussed, and the application scope of this study is demonstrated by an illustration of the effects of the joint thickness. The solutions are also extended for multiple parallel joints with the virtual wave source method and the time-domain recursive method. For an incident wave with arbitrary waveform, it is convenient to adopt the present approach to directly calculate wave propagation across a viscoelastic rock joint without additional mathematical methods such as the Fourier and inverse Fourier transforms.

Impact properties of reduced activation ferritic/martensitic steel, F82H jointed by hot isostatic pressing

Energy Technology Data Exchange (ETDEWEB)

Ogiwara, H.; Tanigawa, H. [Japan Atomic Energy Agency, Tokai-mura, Naga-gun, Ibaraki-ken (Japan); Hirose, T. [Blanket Engineering Group, Japan Atomic Energy Agency, Naka, Ibaraki (Japan); Enoeda, M. [Naka Fusion Research Establishment, J.A.E.R.I., Japan Atomic Energy Research Institute, Ibaraki-ken (Japan); Kohyama, A. [Kyoto Univ., lnstitute of Advanced Energy (Japan)

2007-07-01

Full text of publication follows: Reduced-activation ferritic/martensitic steels are the leading candidate structural material for the blanket system of fusion reactors. The important issue at the current stage is the finalization of a detailed manufacturing specification for ITER test blanket module. Hot isostatic pressing (HIP) process is one of the most important methods to fabricate the first wall with cooling channels. The objective of this paper is to optimize HIP condition to obtain the excellent joints mechanical properties. The materials used were F82H steels. The joint was produced by solid state HIP method. Before HIP treatments, specimens were heated in vacuum condition to out-gas. This treatment was conducted to decrease oxidation on the surfaces. HIP treatments were carried out for 2 h at 1100 deg. C - 140 MPa. The specimens were normalized at 960 deg. C for 0.5 h and tempered at 750 deg. C for 1.5 h. The bonding interface was characterized by scanning electron microscopy. Charpy impact tests and tensile tests were conducted to evaluate the mechanical properties of the HIP joint. Impact tests revealed that there were no significant differences in the ductile-brittle transition temperatures of HIP jointed specimens and base metal specimens, but the upper-shelf energy (USE) of the HIP joint specimens at room temperature was only about 10% of that of the base metal specimens. SEM observations of the fracture surface of HIP joint specimens revealed that a large number of oxides were formed on the HIP joint. This result indicates that oxides formed on the HIP joint are the dominant factor of the impact properties. Based on these results, the pre-HIP treatment conditions had been optimized to reduce the number of oxides, and USE of HIP joint specimens increased to about 50% of that of the base metal. The detailed analyses on the HIP joint microstructure will be reported. (authors)

Evaluation of the magnitude of hip joint deformation in subjects with avascular necrosis of the hip joint during walking with and without Scottish Rite orthosis.

Science.gov (United States)

Karimi, Mohammad Taghi; Mohammadi, Ali; Ebrahimi, Mohammad Hossein; McGarry, Anthony

2017-02-01

The femoral head in subjects with leg calve perthes disease (LCPD) is generally considerably deformed. It is debatable whether this deformation is due to an increase in applied loads, a decrease in bone mineral density or a change in containment of articular surfaces. The aim of this study was to determine the influence of these factors on deformation of the femoral head. Two subjects with LCPD participated in this study. Subject motion and the forces applied on the affected leg were recorded using a motion analysis system (Qualsis TM ) and a Kistler force plate. OpenSim software was used to determine joint contact force of the hip joint whilst walking with and without a Scottish Rite orthosis. 3D Models of hip joints of both subjects were produced by Mimics software. The deformation of femoral bone was determined by Abaqus. Mean values of the force applied on the leg increased while walking with the orthosis. There was no difference between bone mineral density (BMD) of the femoral bone of normal and LCPD sides (p-value>0.05) and no difference between hip joint contact force of normal and LCPD sides. Hip joint containment appeared to decrease follow the use of the orthosis. It can be concluded that the deformation of femoral head in LCPD may not be due to change in BMD or applied load. Although the Scottish Rite orthosis is used mostly to increase hip joint containment, it appears to reduce hip joint contact area. It is recommended that a similar study is conducted using a higher number of subjects. Copyright © 2016 IPEM. All rights reserved.

Detection and management of depression in adult primary care patients in Hong Kong: a cross-sectional survey conducted by a primary care practice-based research network

OpenAIRE

Chan, KTY; Wong, SYS; Chiu, BCF; Chin, WY; Lam, TP; Lam, CLK; Fong, DYT; Lo, YCY

2014-01-01

Background This study aimed to examine the prevalence, risk factors, detection rates and management of primary care depression in Hong Kong. Methods A cross-sectional survey containing the PHQ-9 instrument was conducted on waiting room patients of 59 primary care doctors. Doctors blinded to the PHQ-9 scores reported whether they thought their patients had depression and their management. Results 10,179 patients completed the survey (response rate 81%). The prevalence of PHQ-9 positive screeni...

A Joint Replenishment Inventory Model with Lost Sales

Science.gov (United States)

Devy, N. L.; Ai, T. J.; Astanti, R. D.

2018-04-01

This paper deals with two items joint replenishment inventory problem, in which the demand of each items are constant and deterministic. Inventory replenishment of items is conducted periodically every T time intervals. Among of these replenishments, joint replenishment of both items is possible. It is defined that item i is replenished every ZiT time intervals. Replenishment of items are instantaneous. All of shortages are considered as lost sales. The maximum allowance for lost sales of item i is Si. Mathematical model is formulated in order to determining the basic time cycle T, replenishment multiplier Zi , and maximum lost sales Si in order to minimize the total cost per unit time. A solution methodology is proposed for solve the model and a numerical example is provided for demonstrating the effectiveness of the proposed methodology.

The influence of below-knee compression garments on knee-joint proprioception.

Science.gov (United States)

Ghai, Shashank; Driller, Matthew W; Masters, Rich S W

2018-02-01

The purpose of the study was to assess the influence of below-knee compression garments on proprioception accuracy under, information processing constraints designed to cause high or low conscious attention to the task. In a counterbalanced, single-blinded, crossover trial, 44 healthy participants (26 male/18 female) with a mean age of 22.7±6.9 years performed an active joint repositioning task using their nondominant and their dominant leg, with and without below-knee compression and with and without conducting a secondary task. Analysis of variance revealed no main effect of leg dominance and no interactions (p's>0.05). However, a main effect was evident for both compression (F 1, 43 =84.23, pknee proprioception under differential information processing constraints. We conclude that proprioception accuracy of the knee joint is significantly enhanced post application of below-knee compression garments and when a secondary task is conducted concurrently with active joint repositioning. The findings suggest that below-knee compression garments may improve proprioception of the knee, regardless of leg dominance, and that secondary tasks that direct attention away from proprioceptive judgments may also improve proprioception, regardless of the presence of compression. Clinical implications are discussed with respect to proprioception in modern.sports and rehabilitation settings. Copyright © 2016 Elsevier B.V. All rights reserved.

Experimental joint immobilization in guinea pigs. Effects on the knee joint

Science.gov (United States)

Marcondesdesouza, J. P.; Machado, F. F.; Sesso, A.; Valeri, V.

1980-01-01

In young and adult guinea pigs, the aftermath experimentally induced by the immobilization of the knee joint in hyperextended forced position was studied. Joint immobilization which varied from one to nine weeks was attained by plaster. Eighty knee joints were examined macro and microscopically. Findings included: (1) muscular hypotrophy and joint stiffness in all animals, directly proportional to the length of immobilization; (2) haemoarthrosis in the first week; (3) intra-articular fibrous tissue proliferation ending up with fibrous ankylosis; (4) hyaline articular cartilage erosions; (5) various degrees of destructive menisci changes. A tentative explanation of the fibrous tissue proliferation and of the cartilage changes is offered.

Prosthesis of the wrist-joint

Energy Technology Data Exchange (ETDEWEB)

Feldmeier, C.

1983-02-25

Function of the hand-joint and the well-being of patients can be severely affected by arthrosis of the wrist-joint. Therapeutically, arthrodesis usually results in a painfree status of stiffness. A painless and well functioning joint can be achieved by alloplastic joint replacement or resurfacing. The possibilities and clinical results in cases of arthrosis of the carpo-metacarpal joint of the thumb, pseudarthrosis of the scaphoid, aseptic necrosis of the Lunate and severe arthrosis of the radio-carpal joint are demonstrated.

GDOT employee survey.

Science.gov (United States)

2017-07-04

The research team worked in collaboration with GDOT to conduct the 2016 GDOT Employee Survey. This research study aimed to increase the response rate and the usefulness of the feedback from the GDOT employee survey to support organizational decisions...

[Short-term effectiveness of Swanson artificial joint replacement in treating posttraumatic metacarpophalangeal joint stiffness].

Science.gov (United States)

Lu, Hui; Shen, Xiangqian; Xu, Jihua; Huang, Xin; Ye, Po; Wu, Shoucheng

2011-11-01

To investigate the short-term effectiveness of Swanson artificial joint replacement in treating post-traumatic metacarpophalangeal joint stiffness. Between August 2007 and May 2010, 11 cases (13 fingers) of metacarpophalangeal joint stiffness with soft tissue defects underwent Swanson artificial joint replacement. There were 7 males (9 fingers) and 4 females (4 fingers), aged 43 to 65 years with an average of 49 years. The involved fingers included 4 thumbs, 4 index fingers, 3 middle fingers, and 2 ring fingers. The types of injury included open and crush injury in 8 fingers, fracture of the metacarpophalangeal joint in 3 fingers, metacarpophalangeal joint severing in 2 fingers. The time from joint stiffness to hospitalization was 12 to 48 weeks (mean, 24 weeks). The joint activity was (136.82 +/- 28.96) degrees. According to total active motion (TAM) assessment, included good in 1 finger, fair in 6 fingers, and poor in 6 fingers before operation. The activities of daily living were assessed by Sollerman score, which was 45.64 +/- 11.04. The X-ray films and CT scan showed traumatic arthritis of the metacarpophalangeal joint. The incision healed by first intention. All patients were followed up 12 to 34 months (mean, 24.1 months). At last follow-up, the joint activity was (194.64 +/- 28.86) degrees, showing significant difference when compared with preoperative value (t = 25.214, P = 0.000). According to TAM assessment, including excellent in 1 finger, good in 4 fingers, fair in 7 fingers, and poor in 1 finger. The Sollerman score was 67.45 +/- 8.20 postoperatively, showing significant difference when compared with the preoperative score (t = -10.470, P = 0.000). X-ray examination showed no prosthesis fracture, periprosthetic fracture, or joint dislocation occurred at last follow-up. Swanson artificial joint replacement can be applied to treat post-traumatic metacarpophalangeal joint stiffness, which can improve the joint activity and has satisfactory short

Deep-towed CSEM survey of gas hydrates in the Gulf of Mexico

Science.gov (United States)

Kannberg, P.; Constable, S.

2017-12-01

Controlled source electromagnetic (CSEM) surveys are increasingly being used to remotely detect hydrate deposits in seafloor sediments. CSEM methods are sensitive to sediment pore space resistivity, such as when electrically resistive hydrate displaces the electrically conductive pore fluid, increasing the bulk resistivity of the sediment. In July 2017, a two-week research cruise using an upgraded and expanded "Vulcan" towed receiver system collected over 250 line km of data at four sites in the Gulf of Mexico (GoM) thought to have hydrate bearing sediments. Hydrate bearing horizons at the survey sites ranged from 400-700 m below seafloor. Modeling suggested an array with source receiver offsets of up to 1600 m would be needed to properly image the deep hydrate. A deep towed electromagnetic transmitter outputting 270 Amps was towed 100 m above seafloor. Six Vulcan receivers, each recording three-axis electric field data, were towed at 200 m intervals from 600-1600 m behind the transmitter. The four sites surveyed, Walker Ridge 313, Orca Basin, Mad Dog, and Green Canyon 955, are associated with the upcoming GOM^2 coring operation scheduled for 2020. Wells at WR313 and GC955 were logged as part of a joint industry drilling project in 2009 and will be used to ground truth our inversion results. In 2008, WR313 and GC955 were surveyed using traditional CSEM seafloor receivers, accompanied by a single prototype Vulcan towed receiver. This prior survey will allow comparison of results from a seafloor receiver survey with those from a towed receiver survey. Seismic data has been collected at all the sites, which will be used to constrain inversions. In addition to the four hydrate sites surveyed, two lines were towed over Green Knoll, a deep-water salt dome located between Mad Dog and GC955. Presented here are initial results from our recent cruise.

Partially linear mixed-effects joint models for skewed and missing longitudinal competing risks outcomes.

Science.gov (United States)

Lu, Tao; Lu, Minggen; Wang, Min; Zhang, Jun; Dong, Guang-Hui; Xu, Yong

2017-12-18

Longitudinal competing risks data frequently arise in clinical studies. Skewness and missingness are commonly observed for these data in practice. However, most joint models do not account for these data features. In this article, we propose partially linear mixed-effects joint models to analyze skew longitudinal competing risks data with missingness. In particular, to account for skewness, we replace the commonly assumed symmetric distributions by asymmetric distribution for model errors. To deal with missingness, we employ an informative missing data model. The joint models that couple the partially linear mixed-effects model for the longitudinal process, the cause-specific proportional hazard model for competing risks process and missing data process are developed. To estimate the parameters in the joint models, we propose a fully Bayesian approach based on the joint likelihood. To illustrate the proposed model and method, we implement them to an AIDS clinical study. Some interesting findings are reported. We also conduct simulation studies to validate the proposed method.

A Review of Natural Joint Systems and Numerical Investigation of Bio-Inspired GFRP-to-Steel Joints

Directory of Open Access Journals (Sweden)

Evangelos I. Avgoulas

2016-07-01

Full Text Available There are a great variety of joint types used in nature which can inspire engineering joints. In order to design such biomimetic joints, it is at first important to understand how biological joints work. A comprehensive literature review, considering natural joints from a mechanical point of view, was undertaken. This was used to develop a taxonomy based on the different methods/functions that nature successfully uses to attach dissimilar tissues. One of the key methods that nature uses to join dissimilar materials is a transitional zone of stiffness at the insertion site. This method was used to propose bio-inspired solutions with a transitional zone of stiffness at the joint site for several glass fibre reinforced plastic (GFRP to steel adhesively bonded joint configurations. The transition zone was used to reduce the material stiffness mismatch of the joint parts. A numerical finite element model was used to identify the optimum variation in material stiffness that minimises potential failure of the joint. The best bio-inspired joints showed a 118% increase of joint strength compared to the standard joints.

Prosthesis of the wrist-joint

International Nuclear Information System (INIS)

Feldmeier, C.

1983-01-01

Function of the hand-joint and the well-being of patients can be severely affected by arthrosis of the wrist-joint. Therapeutically, arthrodesis usually results in a painfree status of stiffness. A painless and well functioning joint can be achieved by alloplastic joint replacement or resurfacing. The possibilities and clinical results in cases of arthrosis of the carpo-metacarpal joint of the thumb, pseudarthrosis of the scaphoid, aseptic necrosis of the Lunate and severe arthrosis of the radio-carpal joint are demonstrated. (orig.) [de

Design of mechanical joints

CERN Document Server

Blake, Alexander

2018-01-01

A cornerstone publication that covers the basic principles and practical considerations of design methodology for joints held by rivets, bolts, weld seams, and adhesive materials, Design of Mechanical Joints gives engineers the practical results and formulas they need for the preliminary design of mechanical joints, combining the essential topics of joint mechanics...strength of materials...and fracture control to provide a complete treatment of problems pertinent to the field of mechanical connections.

Estimation of soil salinity in a drip irrigation system by using joint inversion of multicoil electromagnetic induction measurements

KAUST Repository

Jadoon, Khan Zaib

2015-05-12

Low frequency electromagnetic induction (EMI) is becoming a useful tool for soil characterization due to its fast measurement capability and sensitivity to soil moisture and salinity. In this research, a new EMI system (the CMD mini-Explorer) is used for subsurface characterization of soil salinity in a drip irrigation system via a joint inversion approach of multiconfiguration EMI measurements. EMI measurements were conducted across a farm where Acacia trees are irrigated with brackish water. In situ measurements of vertical bulk electrical conductivity (σb) were recorded in different pits along one of the transects to calibrate the EMI measurements and to compare with the modeled electrical conductivity (σ) obtained by the joint inversion of multiconfiguration EMI measurements. Estimates of σ were then converted into the universal standard of soil salinity measurement (i.e., electrical conductivity of a saturated soil paste extract – ECe). Soil apparent electrical conductivity (ECa) was repeatedly measured with the CMD mini-Explorer to investigate the temperature stability of the new system at a fixed location, where the ambient air temperature increased from 26°C to 46°C. Results indicate that the new EMI system is very stable in high temperature environments, especially above 40°C, where most other approaches give unstable measurements. In addition, the distribution pattern of soil salinity is well estimated quantitatively by the joint inversion of multicomponent EMI measurements. The approach of joint inversion of EMI measurements allows for the quantitative mapping of the soil salinity distribution pattern and can be utilized for the management of soil salinity.

Patient Perception of Value in Bundled Payments for Total Joint Arthroplasty.

Science.gov (United States)

Schwartz, Adam J; Fraser, James F; Shannon, Allison M; Jackson, Nikki T; Raghu, T S

2016-12-01

A central concern for providers in a bundled payment model is determining how the bundle is distributed. Prior studies have shown that current reimbursement rates are often not aligned with patients' values. While willingness-to-pay (WTP) surveys are perhaps useful in a fee-for-service arrangement to determine overall reimbursement, the percentage of payment distribution might be as or more important in a bundled payment model. All patients undergoing primary total joint arthroplasty by a single surgeon were offered participation in a preoperative WTP survey. At a minimum 3 months postoperatively, patients were mailed instructions for an online follow-up survey asking how they would allocate a hypothetical bonus payment. From January through December 2014, 45 patients agreed to participate in the preoperative WTP survey. Twenty patients who were minimum 3 months postoperative also completed the follow-up survey. Patients valued total knee and hip arthroplasty at $28,438 (95% confidence interval [CI]: $20,551-36,324) and $39,479 (95% CI: $27,848-$51,112), respectively. At 3 months postoperatively, patients distributed a hypothetical bonus payment 55.5% to the surgeon (95% CI: 47.8%-63.1%), 38% to the hospital (95% CI: 30.3%-45.7%), and 6.5% (95% CI: -1.2% to 14.2%) to the implant manufacturer (P < .001). The data suggest that total joint arthroplasty patients have vastly different perceptions of payment distributions than what actually exists. In contrast to the findings of this study, the true distribution of payments for an episode of care averages 65% to the hospital, 27% to the implant manufacturer, and 8% to the surgeon. While many drivers of payment distribution exist, this study suggests that patients would allocate a larger proportion of a bundled payment to surgeons than is currently disbursed. This finding may also provide a plausible explanation for patients' consistent overestimation of surgeon reimbursements. Copyright © 2016 Elsevier Inc. All rights

Creep deformation behavior of weld metal and heat affected zone on 316FR steel thick plate welded joint

International Nuclear Information System (INIS)

Hongo, Hiromichi; Yamazaki, Masayoshi; Watanabe, Takashi; Kinugawa, Junichi; Tanabe, Tatsuhiko; Monma, Yoshio; Nakazawa, Takanori

1999-01-01

Using hot-rolled 316FR stainless plate (50 mm thick) and 16Cr-8Ni-2Mo filler wire, a narrow-gap welded joint was prepared by GTAW (gas tungsten arc welding) process. In addition to conventional round bar specimens of base metals and weld metal, full-thickness joint specimens were prepared for creep test. Creep tests were conducted at 550degC in order to examine creep deformation and rupture behavior in the weld metal of the welded joint. Creep strain distribution on the surface of the joint specimen was measured by moire interferometry. In the welded joint, creep strength of the weld metal zone apart from the surface was larger than that in the vicinity of the surface due to repeating heat cycles during welding. Creep strain and creep rate within the HAZ adjacent to the weld metal zone were smaller than those within the base metal zone. Creep rate of the weld metal zone in the welded joint was smaller than that of the weld metal specimen due to the restraint of the hardened HAZ adjacent to the zone. The full-thickness welded joint specimens showed longer lives than weld metal specimens, though the lives of the latter was shorter than those of the base metal (undermatching). In the full-thickness welded joint specimen, crack started from the last pass layer of the weld metal zone and fracture occurred at the zone. From the results mentioned above, in order to evaluate the creep properties of the welded joint correctly, it is necessary to conduct the creep test using the full-thickness welded joint specimen which includes the weakest zones of the weld metal, the front and back sides of the plate. (author)

Part I. Remembering No. 2 (Ladislav Loerinc). EMO joint venture, joint-stock company - really completely useless organ?

International Nuclear Information System (INIS)

Blaha, M.

2008-01-01

In this chapter author reviewed the story of the EMO joint venture, joint-stock company, between Slovenske elektrarne, a. s. and EdF. EMO joint venture, joint-stock company, was established to complete the Mochovce nuclear power plant. EMO joint venture, joint-stock company was closed after one year of work. History of EMO joint venture, joint-stock company, was described by its former general manager Mr. Ladislav Loerinc.

Aerial Measuring System (AMS)/Israel Atomic Energy Commission (IAEC) Joint Comparison Study Report

Energy Technology Data Exchange (ETDEWEB)

Wasiolek, P. [National Security Technologies, LLC. (NSTec), Mercury, NV (United States); Halevy, I. [Israel Atomic Energy Commission (IAEC), Yavne (Israel)

2013-12-23

Under the 13th Bilateral Meeting to Combat Nuclear Terrorism conducted on January 8–9, 2013, the committee approved the development of a cost-effective proposal to conduct a Comparison Study of the Aerial Measuring System (AMS) of the U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA) and Israel Atomic Energy Commission (IAEC). The study was to be held at the Remote Sensing Laboratory (RSL), Nellis Air Force Base, Las Vegas, Nevada, with measurements at the Nevada National Security Site (NNSS). The goal of the AMS and the IAEC joint survey was to compare the responses of the two agencies’ aerial radiation detection systems to varied radioactive surface contamination levels and isotopic composition experienced at the NNSS, and the differing data processing techniques utilized by the respective teams. Considering that for the comparison both teams were using custom designed and built systems, the main focus of the short campaign was to investigate the impact of the detector size and data analysis techniques used by both teams. The AMS system, SPectral Advanced Radiological Computer System, Model A (SPARCS-A), designed and built by RSL, incorporates four different size sodium iodide (NaI) crystals: 1" × 1", 2" × 4" × 4", 2" × 4" ×16", and an “up-looking” 2" × 4" × 4". The Israel AMS System, Air RAM 2000, was designed by the IAEC Nuclear Research Center – Negev (NRCN) and built commercially by ROTEM Industries (Israel) and incorporates two 2" diameter × 2" long NaI crystals. The operational comparison was conducted at RSL-Nellis in Las Vegas, Nevada, during week of June 24–27, 2013. The Israeli system, Air RAM 2000, was shipped to RSL-Nellis and mounted together with the DOE SPARCS on a DOE Bell-412 helicopter for a series of aerial comparison measurements at local test ranges, including the Desert Rock Airport and Area 3 at the NNSS. A 4-person Israeli team from the IAEC NRCN supported the activity together with 11

Forming a multinational joint venture

International Nuclear Information System (INIS)

Bhatia, N.K.; Garb, R.H.; Statton, T.D.

1990-01-01

This paper discusses the basis and mechanics for forming a multinational joint venture. The topics of the paper include the motivations for a joint venture, selection of the appropriate co-venturer, management of the multinational joint venture, and the joint venture agreement. The authors state that a joint venture is not applicable or desirable in all instances and to be successful, must be carefully planned

DINAMICS OF KNEE JOINT SPACE ASYMMETRY ON X-RAY AS A MARKER OF KNEE OSTEOARTHRITIS REHABILITATION EFFICACY.

Science.gov (United States)

Sheveleva, N; Minbayeva, L; Belyayeva, Y

2017-03-01

Reducing of articular cartilage functional volume in knee joint osteoarthritis occurs unevenly and accompanied with pathological changes of lower limb axis as a result of connective tissue and muscle structures dysfunction. Evaluation of X-ray knee joint space asymmetry seems to be informative to analyze the dynamics of lower extremities biomechanical imbalances characteristic for knee joint osteoarthritis. However, standardized method of X-ray joint space determining does not include its symmetry calculation. The purpose of the study was optimization of knee joint radiological examination by developing of X-ray knee joint space asymmetry index calculation method. The proposed method was used for comparative analysis of extracorporeal shock-wave therapy efficacy in 30 patients with knee joint osteoarthritis of 2-3 degrees (Kellgren-Lawrence, 1957). As a result of the conducted treatment statistically significant decrease of the X-ray knee joint space asymmetry index was observed (Me(Q1;Q3): Z=5.20, pknee joint space asymmetry index, calculated according to the proposed method, allows to evaluate dynamics of articular surfaces congruency changes and provide differentiated approach to the treatment of knee joint osteoarthritis.

Results of MRI of the temporo-mandibular joint using optimised surface coils

Energy Technology Data Exchange (ETDEWEB)

Vogl, T.; Kellermann, O.; Randzio, J.; Kniha, H.; Requardt, H.; Tiling, R.; Lissner, J.

1988-11-01

One hundred temporo-mandibular joints were examined with a super-conducting nuclear resonance tomograph (1.0 Tesla) using various high resolution surface coils. The optimal method proved to be a spin echo sequence with a repetition time of 1,000 msec and an echo period of 28 msec with a 4 mm slice width. There were significant advantages from the non-invasive MRT diagnosis of the temporo-mandibular joints when compared with CT and with arthrography in recognising abnormal discs, changes in the tissues and for post-operative control.

Joint imaging

International Nuclear Information System (INIS)

Hengst, W.

1984-01-01

Joint imaging is a proven diagnostic procedure which has become indispensable to the detection and treatment of different joint diseases in almost all disciplines. The method is suited for early diagnosis of joint affections both in soft tissue and bone which cannot be detected by X-ray or other procedures. The local activity accumulation depends on the rate of metabolism and is visualized in the scan, which in turn enables the extension and floridity of focal lesions to be evaluated and followed-up. Although joint scans may often give hints to probabilities relevant to differential diagnosis, the method is non-specific and only useful if based on the underlying clinical picture and X-ray finding, if possible. The radiation exposure is very low and does not represent a hazard in cases of adequate assessment of indication. In pregnant women and children the assessment of indication has to be based on very strict principles. The method is suited for out-patient diagnosis and can be applied in all installations equipped with a gamma camera and a technetium generator. (orig.) [de

Managing Joint Production Motivation

DEFF Research Database (Denmark)

Lindenberg, Siegwart; Foss, Nicolai Juul

2011-01-01

We contribute to the microfoundations of organizational performance by proffering the construct of joint production motivation. Under such motivational conditions individuals see themselves as part of a joint endeavor, each with his or her own roles and responsibilities; generate shared...... representations of actions and tasks; cognitively coordinate cooperation; and choose their own behaviors in terms of joint goals. Using goal-framing theory, we explain how motivation for joint production can be managed by cognitive/symbolic management and organizational design....

Joint analysis of Esener-2, the LFS 2013 ad hoc module and the 6th EWCS

NARCIS (Netherlands)

Houtman, I.L.D.; Eekhout, I.; Venema, A.; Bakhuys Roozeboom, M.M.C.; Buuren, S. van

2017-01-01

Psychosocial risk management, psychosocial risks and the role of drivers and barriers: results from a multilevel joint analysis of three major European surveys. The aim of this study was to provide answers to questions concerning OSH risk management, and in particular psychosocial risk management:

Mechanics of Suture Joints

Science.gov (United States)

Li, Yaning; Song, Juha; Ortiz, Christine; Boyce, Mary; Ortiz Group/DMSE/MIT Team; Boyce Group/ME/MIT Team

2011-03-01

Biological sutures are joints which connect two stiff skeletal or skeletal-like components. These joints possess a wavy geometry with a thin organic layer providing adhesion. Examples of biological sutures include mammalian skulls, the pelvic assembly of the armored fish Gasterosteus aculeatus (the three-spined stickleback), and the suture joints in the shell of the red-eared slider turtle. Biological sutures allow for movement and compliance, control stress concentrations, transmit loads, reduce fatigue stress and absorb energy. In this investigation, the mechanics of the role of suture geometry in providing a naturally optimized joint is explored. In particular, analytical and numerical micromechanical models of the suture joint are constructed. The anisotropic mechanical stiffness and strength are studied as a function of suture wavelength, amplitude and the material properties of the skeletal and organic components, revealing key insights into the optimized nature of these ubiquitous natural joints.

Joint Intentionality

Directory of Open Access Journals (Sweden)

Koreň Ladislav

2016-03-01

Full Text Available According to the shared intentionality hypothesis proposed by Michael Tomasello, two cognitive upgrades – joint and collective intentionality, respectively – make human thinking unique. Joint intentionality, in particular, is a mindset supposed to account for our early, species-specific capacity to participate in collaborative activities involving two (or a few agents. In order to elucidate such activities and their proximate cognitive-motivational mechanism, Tomasello draws on philosophical accounts of shared intentionality. I argue that his deference to such cognitively demanding accounts of shared intentional activities is problematic if his theoretical ambition is in part to show that and how early (prelinguistic and precultural capacities for joint action contribute to the development of higher cognitive capacities.

Survey of pharmacy involvement in hospital medication reconciliation programs across the United States

Directory of Open Access Journals (Sweden)

Gregory R Stein

2015-11-01

Full Text Available Objective: The objective of this study is to conduct a review of pertinent literature, assess pharmacy involvement in medication reconciliation, and offer insight into best practices for hospitals to implement and enhance their medication reconciliation programs. Method: Pharmacists in hospitals nationwide were asked to complete an anonymous survey via the American College of Clinical Pharmacy online database. The multiple choice survey analyzed the roles that healthcare professionals play in medication reconciliation programs at hospitals. Results: Of the survey responses received, 32/91 (35% came from pharmacists at hospitals with a pharmacy-led medication reconciliation program. Of these pharmacy-led programs, 17/32 (53% have a dedicated pharmacist or pharmacy staff to perform medication reconciliation. Conclusion: A comprehensive review of literature suggests that pharmacy involvement has the potential to reduce medication reconciliation errors and may improve patient satisfaction. Focused, full-time medication reconciliation pharmacists can help hospitals save time and money, improve outcomes, and meet higher standards issued by the Joint Commission. Data obtained in this study show the extent to which pharmacists contribute to achieving these goals in healthcare systems nationwide. This baseline study provides a strong case for hospitals to implement a pharmacy-led medication reconciliation program.

Impact of the joint-stock reform of commercial banks on the effectiveness of monetary policy in China

Directory of Open Access Journals (Sweden)

Fang Xianming

2016-01-01

Full Text Available Over the past decade, the Chinese government has conducted the joint-stock reform of state-owned commercial banks. The joint-stock reform improves the marketization level of the ownership structure of commercial banks and consequently leads to impacts on the effectiveness of monetary policy. This paper first presents the impacting mechanisms of the joint-stock reform of commercial banks on the effectiveness of monetary policy and then constructs an empirical model to test those impacts. The empirical results show that the increasing degree of joint-stock reform of commercial banks enhances the effectiveness of expansionary monetary policy but weakens the effectiveness of contractionary monetary policy in China.

Improved TIG weld joint strength in aluminum alloy 2219-T87 by filler metal substitution

Science.gov (United States)

Poorman, R. M.; Lovoy, C. V.

1972-01-01

The results of an investigation on weld joint characteristics of aluminum alloy 2219-T87 are given. Five different alloys were utilized as filler material. The mechanical properties of the joints were determined at ambient and cryogenic temperatures for weldments in the as-welded condition and also, for weldments after elevated temperature exposures. Other evaluations included hardness surveys, stress corrosion susceptibility, and to a limited extent, the internal metallurgical weld structures. The overall results indicate that M-943 filler weldments are superior in strength to weldments containing either the standard 2319 filler or fillers 2014, 2020, and a dual wire feed consisting of three parts 2319 and one part 5652. In addition, no deficiencies were evident in M-934 filler weldments with regard to ductility, joint strength after elevated temperature exposure, weld hardness, metallographic structures, or stress corrosion susceptibility.

Prevalence of joint contractures and muscle weakness in people with multiple sclerosis.

Science.gov (United States)

Hoang, Phu Dinh; Gandevia, Simon C; Herbert, Robert D

2014-01-01

To investigate the prevalence of joint contracture (limited passive range of joint motion) and muscle weakness in a population with multiple sclerosis (MS). A secondary aim was to establish normative data of functional tests of mobility and balance of people with MS who are still ambulant. Cross-sectional study. People with MS living in metropolitan Sydney, Australia. 330 people with MS living in metropolitan Sydney, Australia were randomly sampled on 23 July 2009 from the MS Australia register and invited to participate. Passive range of motion of large joints of the limbs and muscle strength. Tests of walking and balance were also conducted. 156 people (109 females, 47 males; mean age 54.2 years; mean time since diagnosis 14.9 years) agreed to participate and were assessed. Fifty-six per cent (56%) of participants had contracture in at least one major joint of upper or lower limb. The most common site of contracture was the ankle (43.9%). Seventy per cent (70%) of participants had muscle weakness in one or more muscle groups. As muscle weakness, joint contractures were present at early stage of MS and the prevalence was associated with the progression of the disease. These data show that in addition to muscle weakness joint contractures are highly prevalent among people with MS, especially in the ankle joint. This implicates that prevention of contracture is crucial in providing rehabilitation to people with MS.

The temporomandibular joint

International Nuclear Information System (INIS)

Campbell, W.

1984-01-01

Whilst the temporomandibular joint is in many ways unique, it is subject to all the diseases and disorders found in joints in other parts of the human skeleton. By far the most common disorder is injury, followed by arthropathy, acute and chronic dislocations, ankylosis, and in rare instances, neoplasms. The diagnosis and management of the temporomandibular joint are the primary responsibility of the oral surgeon. Nevertheless, this anatomical region is an area in which the cooperation of medical and dental disciplines may be required for the satisfactory conclusion of treatment. The more so when the disease process involves either associated psychosomatic illness or malignancy. The mainstay of the diagnosis is a careful radiological examination of the joint. There exists a delicate relationship between the dentition, the muscles of mastication, and the temporomandibular articulation, which is controlled by arthrokinetic reflex activity of the branches of the 5th cranial nerve. Imbalance between one or more of the components of this integrated system frequently leads to disturbances in function. Pain-dysfunction disorders constitute the larger part of temporomandibular joint disturbances generally encountered

A clamping force measurement system for monitoring the condition of bolted joints on railway track joints and points

International Nuclear Information System (INIS)

Tesfa, B; Horler, G; Thobiani, F Al; Gu, F; Ball, A D

2012-01-01

Many industrial structures associated with railway infrastructures rely on a large number of bolted joint connections to ensure safe and reliable operation of the track and trackside furniture. Significant sums of money are spent annually to repair the damage caused by bolt failures and to maintain the integrity of bolted structures. In the UK, Network Rail (the organization responsible for rail network maintenance and safety) conducts corrective and preventive maintenance manually on 26,000 sets of points (each having approximately 30 bolted joints per set), in order to ensure operational success and safety for the travelling public. Such manual maintenance is costly, disruptive, unreliable and prone to human error. The aim of this work is to provide a means of automatically measuring the clamping force of each individual bolted joint, by means of an instrumented washer. This paper describes the development of a sensor means to be used in the washer, which satisfies the following criteria. 1. Sense changes in the clamping force of the joint and report this fact. 2. Provide compatibility with the large dynamic range of clamping force. 3. Satisfy the limitations in terms of physical size. 4. Provide the means to electronically interface with the washer. 5. Provide a means of powering the washer in situ. 6. Provide a solution at an acceptable cost. Specifically the paper focuses on requirements 1, 2 and 3 and presents the results that support further development of the proposed design and the realization of a pre-prototype system. In the paper, various options for the force sensing element (strain gage, capacitor, piezo-resistive) have been compared, using design optimization techniques. As a result of the evaluation, piezo-resistive sensors in concert with a proprietary force attenuation method, have been found to offer the best performance and cost trade-off The performance of the novel clamping force sensor has been evaluated experimentally and the results show

Effect of process parameters on microstructure and electrical conductivity during FSW of Al-6101 and Pure Copper

Science.gov (United States)

Sharma, Nidhi; Khan, Zahid A.; Siddiquee, Arshad Noor; Shihab, Suha K.; Atif Wahid, Mohd

2018-04-01

Copper (Cu) is predominantly used material as a conducting element in electrical and electronic components due to its high conductivity. Aluminum (Al) being lighter in weight and more conductive on weight basis than that of Cu is able to replace or partially replace Cu to make lighter and cost effective electrical components. Conventional methods of joining Al to Cu, such as, fusion welding process have many shortcomings. Friction Stir Welding (FSW) is a solid state welding process which overcomes the shortcoming of the fusion welding. FSW parameters affect the mechanical and electrical properties of the joint. This study aims to evaluate the effect of different process parameters such as shoulder diameter, pin offset, welding and rotational speed on the microstructure and electrical conductivity of the dissimilar Al-Cu joint. FSW is performed using cylindrical pin profile, and four process parameters. Each parameter at different levels is varied according to Taguchi’s L18 standard orthogonal array. It is found that the electrical conductivity of the FSWed joints are equal to that of aluminum at all the welded sections. FSW is found to be an effective technique to join Al to Cu without compromising with the electrical properties. However, the electrical conductivity gets influenced by the process parameters in the stir zone. The optimal combination of the FSW parameters for maximum electrical conductivity is determined. The analysis of variance (ANOVA) technique applied on stir zone suggests that the rotational speed and tool pin offset are the significant parameters to influence the electrical conductivity.

Benign joint hypermobility syndrome

Directory of Open Access Journals (Sweden)

Iwona Słowińska

2014-11-01

Full Text Available Benign joint hypermobility syndrome (BJHS, commonly known as loose ligament syndrome, is a non-inflammatory rheumatic condition. It is characterised by a greater than normal range of motion of the joints of the limbs and spine. The prevalence of the syndrome in preschool-age children is estimated to be between 2% and 30%, depending on ethnic background (with higher prevalence in Asian and African populations, occurring most often in families with a history of the condition and more frequently in girls. This paper presents a case report of a 12-year-old girl. A broad differential diagnostic approach to recurrent joint inflammation with joint effusion and pain made it possible to establish a diagnosis of benign joint hypermobility syndrome. The child met the Brighton criteria; her Beighton score was 7 out of 9. Patient education aimed at eliminating abnormal joint movement and an appropriate rehabilitation programme play key roles in the treatment of BJHS.

Accelerated Comparative Fatigue Strength Testing of Belt Adhesive Joints

Science.gov (United States)

Bajda, Miroslaw; Blazej, Ryszard; Jurdziak, Leszek

2017-12-01

Belt joints are the weakest link in the serial structure that creates an endless loop of spliced belt segments. This affects not only the lower strength of adhesive joints of textile belts in comparison to vulcanized splices, but also the replacement of traditional glues to more ecological but with other strength parameters. This is reflected in the lowered durability of adhesive joints, which in underground coal mines is nearly twice shorter than the operating time of belts. Vulcanized splices require high precision in performance, they need long time to achieve cross-linking of the friction mixture and, above all, they require specialized equipment (vulcanization press) which is not readily available and often takes much time to be delivered down, which means reduced mining output or even downtime. All this reduces the reliability and durability of adhesive joints. In addition, due to the consolidation on the Polish coal market, mines are joined into large economic units serviced by a smaller number of processing plants. The consequence is to extend the transport routes downstream and increase reliability requirements. The greater number of conveyors in the chain reduces reliability of supply and increases production losses. With high fixed costs of underground mines, the reduction in mining output is reflected in the increase in unit costs, and this at low coal prices on the market can mean substantial losses for mines. The paper describes the comparative study of fatigue strength of shortened samples of adhesive joints conducted to compare many different variants of joints (various adhesives and materials). Shortened samples were exposed to accelerated fatigue in the usually long-lasting dynamic studies, allowing more variants to be tested at the same time. High correlation between the results obtained for shortened (100 mm) and traditional full-length (3×250 mm) samples renders accelerated tests possible.

The prevalence of cam-type deformity of the hip joint: a survey of 4151 subjects of the Copenhagen Osteoarthritis Study

DEFF Research Database (Denmark)

Gosvig, K.K.; Jacobsen, S.; Sonne-Holm, S.

2008-01-01

. The relationships between cam malformation and self-reported hip pain were evaluated, and the relative importance of known risk factors for cam malformation estimated. RESULTS: We found a pronounced sex-related difference in cam-deformity distribution. The overall prevalence of cam deformity was approximately 17......BACKGROUND: Cam deformity is a preosteoarthritic malformation causing premature hip-joint degeneration. While the pathogenetic pathway from deformity to osteoarthrosis (OA) has been well established, almost nothing is known of the malformation's epidemiology. PURPOSE: To determine the distribution......% in men and 4% in women. The distribution of cam deformity was unaltered in subjects with normal joint-space width or other features of hip-joint degeneration. We found no significant association with self-reported hip pain, nor did we find any relative importance of possible risk factors for hip...

Joint Venture Manufacturing in China : an Exploratory Investigation

OpenAIRE

Zhang, Lihong; Goffin, Keith

1999-01-01

International joint venture (IJV) manufacturing is important for both the Chinese economy and a large number of foreign investors. A review of the literature from both Western and Chinese researchers showed that although the purpose and advantages of IJV manufacturing in China are known, a vital aspect – operations management – has largely been ignored. Therefore, exploratory interviews with managers at six companies were conducted to investigate the operations management is...

New tools for evaluating LQAS survey designs.

Science.gov (United States)

Hund, Lauren

2014-02-15

Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are provided for calculating the positive and negative predictive value of a design with respect to an underlying coverage distribution and the selected design parameters. These tools are illustrated using a data example from two consecutive LQAS surveys measuring Oral Rehydration Solution (ORS) preparation. Using the survey tools, the dependence of classification accuracy on benchmark selection and the width of the 'grey region' are clarified in the context of ORS preparation across seven supervision areas. Following the completion of an LQAS survey, estimation of the distribution of coverage across areas facilitates quantifying classification accuracy and can help guide intervention decisions.

Evaluation of Radiographic Instability of the Trapeziometacarpal Joint in Women With Carpal Tunnel Syndrome.

Science.gov (United States)

Kim, Jeong Hwan; Gong, Hyun Sik; Kim, Youn Ho; Rhee, Seung Hwan; Kim, Jihyoung; Baek, Goo Hyun

2015-07-01

To determine whether median nerve dysfunction measured by electrophysiologic studies in carpal tunnel syndrome (CTS) is associated with thumb trapeziometacarpal (TMC) joint instability. We evaluated 71 women with CTS and 31 asymptomatic control women. Patients with generalized laxity or TMC joint osteoarthritis were excluded. We classified the electrophysiologic severity of CTS based on nerve conduction time and amplitude and assessed radiographic instability of the TMC joint based on TMC joint stress radiographs. We compared subluxation ratio between patients with CTS and controls and performed correlation analysis of the relationship between the electrophysiologic grade and subluxation ratio. Thirty-one patients were categorized into the mild CTS subgroup and 41 into the severe CTS subgroup. There was no significant difference in subluxation ratio between the control group and CTS patients or between the control group and CTS subgroup patients. Furthermore, there was no significant correlation between electrophysiologic grade and subluxation ratio. This study demonstrated that patients with CTS did not have greater radiographic TMC joint instability compared with controls, and suggests that TMC joint stability is not affected by impaired median nerve function. Further studies could investigate how to better evaluate proprioceptive function of TMC joint and whether other nerves have effects on TMC joint motor/proprioceptive function, to elucidate the relationship between neuromuscular control of the TMC joint, its stability, and its progression to osteoarthritis. Diagnostic II. Copyright © 2015 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Diagnostic validity of criteria for sacroiliac joint pain: a systematic review

NARCIS (Netherlands)

Szadek, K.M.; van der Wurff, P.; van Tulder, M.W.; Zuurmond, W.W.A.; Perez, R.S.G.M.

2009-01-01

A systematic literature review was conducted to determine the diagnostic validity of the criteria for sacroiliac (SI) joint pain as proposed by the International Association for the Study of Pain (IASP). Databases were searched up to September 2007. Quality of the studies was assessed using a

Diagnostic Validity of Criteria for Sacroiliac Joint Pain : A Systematic Review

NARCIS (Netherlands)

Szadek, Karolina M.; van der Wurff, Peter; van Tulder, Maurits W.; Zuurmond, Wouter W.; Perez, Roberto S. G. M.

A systematic literature review was conducted to determine the diagnostic validity of the criteria for sacroiliac (SI) joint pain as proposed by the International Association for the Study of Pain (IASP). Databases were searched up to September 2007. Quality of the studies was assessed using a

Sacroiliac joint dysfunction.

Science.gov (United States)

Ilaslan, Hakan; Arslan, Ahmet; Koç, Omer Nadir; Dalkiliç, Turker; Naderi, Sait

2010-07-01

Sacroiliac joint dysfunction is a disorder presenting with low back and groin pain. It should be taken into consideration during the preoperative differential diagnosis of lumbar disc herniation, lumbar spinal stenosis and facet syndrome. Four cases with sacroiliac dysfunction are presented. The clinical and radiological signs supported the evidence of sacroiliac dysfunction, and exact diagnosis was made after positive response to sacroiliac joint block. A percutaneous sacroiliac fixation provided pain relief in all cases. The mean VAS scores reduced from 8.2 to 2.2. It is concluded that sacroiliac joint dysfunction diagnosis requires a careful physical examination of the sacroiliac joints in all cases with low back and groin pain. The diagnosis is made based on positive response to the sacroiliac block. Sacroiliac fixation was found to be effective in carefully selected cases.

Creep characteristics in thick welded joints and their improvements. 2. Applicability of a simple model for creep analysis of thick welded joints

International Nuclear Information System (INIS)

Nakacho, Keiji; Ueda, Yukio; Kinugawa, Junichi; Yamazaki, Masayoshi

1997-01-01

Reliable predictions of the creep behavior of thick welded joints are very important to secure the safety of elevated temperature vessels like nuclear reactors. Creep behavior is very complex, thus it is difficult to perform the experiment and conduct the theoretical analysis. A simple accurate model for theoretical analysis was developed in the first report. The simple model is constructed of seven one-dimensional finite elements which can analyze not only one-dimensional stress creep behavior but also the three-dimensional situation. The simple model is verified by comparing the analyzed results with the experimental ones in this report. The model is easy to treat, and needs only a little labor and computation time to predict the creep curve and the local strain for a thick welded joint. (author)

MAX and Survey Linkages

Data.gov (United States)

U.S. Department of Health & Human Services — CMS is interested in linking MAX files with survey data, including four surveys conducted by the National Center for Health Statistics (NCHS) - the National Health...

Joint Residence-Workplace Location Choice Model Based on Household Decision Behavior

Directory of Open Access Journals (Sweden)

Pengpeng Jiao

2015-01-01

Full Text Available Residence location and workplace are the two most important urban land-use types, and there exist strong interdependences between them. Existing researches often assume that one choice dimension is correlated to the other. Using the mixed logit framework, three groups of choice models are developed to illustrate such choice dependencies. First, for all households, this paper presents a basic methodology of the residence location and workplace choice without decision sequence based on the assumption that the two choice behaviors are independent of each other. Second, the paper clusters all households into two groups, choosing residence or workplace first, and formulates the residence location and workplace choice models under the constraint of decision sequence. Third, this paper combines the residence location and workplace together as the choice alternative and puts forward the joint choice model. A questionnaire survey is implemented in Beijing city to collect the data of 1994 households. Estimation results indicate that the joint choice model fits the data significantly better, and the elasticity effects analyses show that the joint choice model reflects the influences of relevant factors to the choice probability well and leads to the job-housing balance.

Metallic joints for very high vacuum; Joints metalliques pour ultra-vide

Energy Technology Data Exchange (ETDEWEB)

Paigne, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1961-07-01

After defining three main types of joint; three types of distribution of the tightening force in the clamps are demonstrated; the distribution of stresses, distortion and displacements in these clamps is then calculated by means of the theory of elasticity. This is followed by experimental results on a particular means of tightening (i.e. screw-clamps). From a brief discussion on the behaviour of the clamps it is possible finally to define other types of joint deriving from the main types originally foreseen. (author) [French] Apres avoir defini trois principaux types de joints, on met en evidence trois types de distribution des forces de serrage des brides; puis on calcule a l'aide de la theorie de l'elasticite la distribution des contraintes, deformations et deplacements dans ces brides. On donne ensuite des resultats experimentaux sur un mode de serrage particulier (cas des serres-joints). Une discussion sommaire sur le comportement des brides permet de definir finalement d'autres types de joints derivant des types principaux envisages initialement. (auteur)

The joint verification experiments as a global non-proliferation exercise

International Nuclear Information System (INIS)

Shaner, J.W.

1998-01-01

This conference commemorates the 10th anniversary of the second of two Joint Verification Experiments conducted by the Soviet Union and the US. These two experiments, one at the Nevada test site in the US, and the second here at the Semipalatinsk test site were designed to test the verification of a nuclear testing treaty limiting the size underground explosions to 150 kilotons. By building trust and technical respect between the weapons scientists of the two most powerful adversaries, the Joint Verification Experiment (JVE) had the unanticipated result of initiating a suite of cooperative projects and programs aimed at reducing the Cold War threats and preventing the proliferation of weapons of mass destruction

Acromioclavicular joint separation

Directory of Open Access Journals (Sweden)

Devan Pandya, BS

2018-04-01

Full Text Available History of present illness: A 30-year-old male was brought in by ambulance to the emergency department as a trauma activation after a motorcycle accident. The patient was the helmeted rider of a motorcycle traveling at an unknown speed when he lost control and was thrown off his vehicle. He denied loss of consciousness, nausea, or vomiting. The patient’s vital signs were stable and his only complaint was pain around his left shoulder. On exam, the patient had a prominent left clavicle without skin compromise. He had adequate range of motion in the left shoulder with moderate pain, and his left upper extremity was neurovascularly intact. Significant findings: Plain films of the left shoulder showed elevation of the left clavicle above the acromion. There was an increase in the acromioclavicular (AC and coracoclavicular (CC distances (increased joint distances marked with red and blue arrows, respectively. A normal AC joint measures 1-3 mm whereas a normal CC distance measures 11-13 mm.1 The injury was classified as a Rockwood type III AC joint separation. Discussion: The AC joint is a synovial joint between an oval facet on the acromion and a similar facet on the distal end of the clavicle. Horizontal stability is provided by the AC joint while axial stability is provided by the CC joint.2,3 AC joint injuries account for about 9%-12% of shoulder girdle injuries, and the most common mechanism is direct trauma.4,5 Initial evaluation with imaging includes plain films with three views: the anterior-posterior (AP view with the shoulder in internal and external rotation as well as an axillary, or scapula-Y view (sensitivity 40%, specificity 90% for all films.6,7 AC joint injuries are classified by the Rockwood system.8 Type I involves a sprain or incomplete tear of the AC ligaments with an intact CC ligament. The AC joint appears normal on X-ray, but can become widened with stress, achieved by having the patient hold a 10-15 pound weight from each

Hip joint injection

Science.gov (United States)

... medicine into the joint. The provider uses a real-time x-ray (fluoroscopy) to see where to place ... Wakefield RJ. Arthrocentesis and injection of joints and soft tissue. In: Firestein GS, Budd RC, Gabriel SE, ...

Lumbar facet syndrome - Lumbar facet joint injection and low back pain

International Nuclear Information System (INIS)

Acevedo Gonzalez, Juan Carlos; Jimenez Hakim, Enrique; Rodriguez, Jose Maria; Hakim Daccach, Fernando; Quinonez, German; Rodriguez Munera, Andres

2004-01-01

The authors conducted a retrospective study lo evaluate the effectiveness of injection therapy in the lumbar zygapophysial joints with anesthetics and steroids in patients with persisting low back pain and lumbar facer syndrome. Thirty-seven patients with low back pain who reported immediate relief of their pain after controlled blocks into the facet joints between the fourth and fifth lumbar vertebrae and the fifth lumbar and first sacral vertebrae were evaluated. Outcome was evaluated using the visual analog pain scales. All outcome measures were repeated at eight days and six weeks alter controlled injection. At six-week follow-up examination 83,7% of thirty-seven patients experienced a good response to controlled blocks of the lumbar zygaphyseal (facet) joints. Good result is the pain relief of 50% or more. Fifteen patients experienced a good response with pain relief of eight points or more in the VAS

Responsible Conduct of Research in Communication Sciences and Disorders: Faculty and Student Perceptions

Science.gov (United States)

Minifie, Fred D.; Robey, Randall R.; Horner, Jennifer; Ingham, Janis C.; Lansing, Charissa; McCartney, James H.; Alldredge, Elham-Eid; Slater, Sarah C.; Moss, Sharon E.

2011-01-01

Purpose: Two Web-based surveys (Surveys I and II) were used to assess perceptions of faculty and students in Communication Sciences and Disorders (CSD) regarding the responsible conduct of research (RCR). Method: Survey questions addressed 9 RCR domains thought important to the responsible conduct of research: (a) human subjects protections; (b)…

Temporomandibular joint formation requires two distinct hedgehog-dependent steps.

Science.gov (United States)

Purcell, Patricia; Joo, Brian W; Hu, Jimmy K; Tran, Pamela V; Calicchio, Monica L; O'Connell, Daniel J; Maas, Richard L; Tabin, Clifford J

2009-10-27

We conducted a genetic analysis of the developing temporo-mandibular or temporomandi-bular joint (TMJ), a highly specialized synovial joint that permits movement and function of the mammalian jaw. First, we used laser capture microdissection to perform a genome-wide expression analysis of each of its developing components. The expression patterns of genes identified in this screen were examined in the TMJ and compared with those of other synovial joints, including the shoulder and the hip joints. Striking differences were noted, indicating that the TMJ forms via a distinct molecular program. Several components of the hedgehog (Hh) signaling pathway are among the genes identified in the screen, including Gli2, which is expressed specifically in the condyle and in the disk of the developing TMJ. We found that mice deficient in Gli2 display aberrant TMJ development such that the condyle loses its growth-plate-like cellular organization and no disk is formed. In addition, we used a conditional strategy to remove Smo, a positive effector of the Hh signaling pathway, from chondrocyte progenitors. This cell autonomous loss of Hh signaling allows for disk formation, but the resulting structure fails to separate from the condyle. Thus, these experiments establish that Hh signaling acts at two distinct steps in disk morphogenesis, condyle initiation, and disk-condyle separation and provide a molecular framework for future studies of the TMJ.

Survey of Visitors to Bornholm 2001

DEFF Research Database (Denmark)

Hartl, Ann; Rassing, Charlotte

In July 1995 the Research Centre of Bornholm (now: Centre for Regional and Tourism Research) began conducting a survey among visitors to Bornholm. The survey is being conducted in order to assess the nature of tourism demand in peripheral areas, using Bornholm as a case example for the purposes...... of fieldwork. During the first year people arriving and departing by ferry and plane were interviewed. Since July 1996 only people departing by ferry have been interviewed. The overall objective is to provide a comprehensive description of visitors to Bornholm that was in keeping with the standard analysis...... of destination surveys. Because the survey has been conducted for six and a half year (since July 1995) the data can also disclose trends in visitor patterns. The passenger survey carried out by the Centre for Regional and Tourism Research is, to our knowledge, the largest of its kind carried out in Denmark....

Survey of Visitors to Bornholm 2002

DEFF Research Database (Denmark)

Hartl, Ann

In July 1995 the Research Centre of Bornholm (now: Centre for Regional and Tourism Research) began conducting a survey among visitors to Bornholm. The survey was conducted in order to assess the nature of tourism demand in peripheral areas, using Bornholm as a case example for the purposes...... of fieldwork. During the first year people arriving and departing by ferry and plane were interviewed. From July 1996 only people departing by ferry were interviewed. The overall objective is to provide a comprehensive description of visitors to Bornholm that was in keeping with the standard analysis...... of destination surveys. Because the survey has been conducted for seven and a half year altogether, the data can also disclose trends in visitor patterns. The passenger survey carried out by the Centre for Regional and Tourism Research is, to our knowledge, the largest of its kind carried out in Denmark....

Oxide formation and precipitation behaviors on interface of F82H steel joints during HIPing and hot pressing

International Nuclear Information System (INIS)

Kishimoto, H.; Ono, T.; Sakasegawa, H.; Tanigawa, H.; Ando, M.; Shibayama, T.; Kohno, Y.; Kohyama, A.

2013-01-01

Joining technologies for F82H steels are important issues for the development of fusion energy. The hot isostatic pressing (HIP) method is appropriate for consolidating the first wall of the blanket because of the flexibility of the shape of HIPed products. The HIP method is planned for fabricating a complex-shaped first wall component with built-in cooling channels; thus, accumulation of studies of microstructural and mechanical property changes, especially lower toughness of the HIPed joints, is essential. Present research aims to reveal the microstructural evolution of F82H joints fabricated by the HIP method compared with joints fabricated by hot pressing, focusing on the formation of oxides on the interface. F82H joints were characterized using 1/3-scale Charpy V-notch impact test, transmission electron microscope, scanning electron microscope, and electron probe analysis to survey the microstructural characteristics of the interface

Inferior olive mirrors joint dynamics to implement an inverse controller.

Science.gov (United States)

Alvarez-Icaza, Rodrigo; Boahen, Kwabena

2012-10-01

To produce smooth and coordinated motion, our nervous systems need to generate precisely timed muscle activation patterns that, due to axonal conduction delay, must be generated in a predictive and feedforward manner. Kawato proposed that the cerebellum accomplishes this by acting as an inverse controller that modulates descending motor commands to predictively drive the spinal cord such that the musculoskeletal dynamics are canceled out. This and other cerebellar theories do not, however, account for the rich biophysical properties expressed by the olivocerebellar complex's various cell types, making these theories difficult to verify experimentally. Here we propose that a multizonal microcomplex's (MZMC) inferior olivary neurons use their subthreshold oscillations to mirror a musculoskeletal joint's underdamped dynamics, thereby achieving inverse control. We used control theory to map a joint's inverse model onto an MZMC's biophysics, and we used biophysical modeling to confirm that inferior olivary neurons can express the dynamics required to mirror biomechanical joints. We then combined both techniques to predict how experimentally injecting current into the inferior olive would affect overall motor output performance. We found that this experimental manipulation unmasked a joint's natural dynamics, as observed by motor output ringing at the joint's natural frequency, with amplitude proportional to the amount of current. These results support the proposal that the cerebellum-in particular an MZMC-is an inverse controller; the results also provide a biophysical implementation for this controller and allow one to make an experimentally testable prediction.

Parameter identification for joint elements in a revolute-joint detector manipulator

International Nuclear Information System (INIS)

Preissner, C.; Shu, D.; Royston, T.

2005-01-01

A revolute-joint robot is being developed for the spatial positioning of an x-ray detector at the Advanced Photon Source. Commercially available revolute-joint manipulators do not meet our size, positioning, or payload specifications. One idea being considered is the modification of a commercially available robot, with the goal of improving the repeatability and trajectory accuracy. Theoretical, computational, and experimental procedures are being used to (1) identify, (2) simulate the dynamics of an existing robot system using a multibody approach, and eventually (3) design an improved version, with low dynamic positioning uncertainty. A key aspect of the modeling and performance prediction is accurate stiffness and damping values for the robot joints. This paper discusses the experimental identification of the stiffness and damping parameters for one robot harmonic drive joint

Joint Force Quarterly. Number 31, Summer 2002

Science.gov (United States)

2002-09-01

Reginal G. Clemmons , USA ■ National War College A. Denis Clift ■ Joint Military Intelligence College RADM David R. Ellison, USN ■ Naval Postgraduate...commandfigures in a book by thesame title that is too rarelyread today: a memoir of World War II by Maurice Hankey.1 A small, neat, bald man, Hankey...dialogue is conducted. JFQ N O T E S 1 Maurice Hankey, Supreme Command, 2 vols. (London: George Allen and Unwin, 1960). On the issue of supreme command

Joint model of motion and anatomy for PET image reconstruction

International Nuclear Information System (INIS)

Qiao Feng; Pan Tinsu; Clark, John W. Jr.; Mawlawi, Osama

2007-01-01

Anatomy-based positron emission tomography (PET) image enhancement techniques have been shown to have the potential for improving PET image quality. However, these techniques assume an accurate alignment between the anatomical and the functional images, which is not always valid when imaging the chest due to respiratory motion. In this article, we present a joint model of both motion and anatomical information by integrating a motion-incorporated PET imaging system model with an anatomy-based maximum a posteriori image reconstruction algorithm. The mismatched anatomical information due to motion can thus be effectively utilized through this joint model. A computer simulation and a phantom study were conducted to assess the efficacy of the joint model, whereby motion and anatomical information were either modeled separately or combined. The reconstructed images in each case were compared to corresponding reference images obtained using a quadratic image prior based maximum a posteriori reconstruction algorithm for quantitative accuracy. Results of these studies indicated that while modeling anatomical information or motion alone improved the PET image quantitation accuracy, a larger improvement in accuracy was achieved when using the joint model. In the computer simulation study and using similar image noise levels, the improvement in quantitation accuracy compared to the reference images was 5.3% and 19.8% when using anatomical or motion information alone, respectively, and 35.5% when using the joint model. In the phantom study, these results were 5.6%, 5.8%, and 19.8%, respectively. These results suggest that motion compensation is important in order to effectively utilize anatomical information in chest imaging using PET. The joint motion-anatomy model presented in this paper provides a promising solution to this problem

77 FR 19673 - Proposed Collection; Comment Request; Generic Clearance To Conduct Voluntary Customer/Partner...

Science.gov (United States)

2012-04-02

... Request; Generic Clearance To Conduct Voluntary Customer/Partner Surveys SUMMARY: In compliance with the... to Conduct Voluntary Customer/Partner Surveys; Type of Information Collection Request: Extension of... directly to the public to survey customers to determine the kind and quality of services they want and...

Testing the permeability and corrosion resistance of micro-mechanically interlocked joints

DEFF Research Database (Denmark)

Byskov-Nielsen, Jeppe; Holm, Allan Hjarbæk; Højsholt, Rune

2011-01-01

Micro-mechanical interlocking (MMI) can be applied to create new and interesting composite materials. We have employed laser structuring to achieve MMI between stainless steel and plastic with extremely high joint strength. However, the water permeability and corrosion resistance of the joint must...... is conducted. The permeability seems to be consistent with the Hagen–Poiseuille equation independent of the laser structuring technique and is orders of magnitudes larger than the diffusion rate through the plastic. Two different types of corrosion tests have been undertaken, and we show that care must...... be taken in order not to degrade the corrosion resistance of the sample to an unacceptable level....

Shoulder joint loading and posture during medicine cart pushing task.

Science.gov (United States)

Xu, Xu; Lin, Jia-Hua; Boyer, Jon

2013-01-01

Excessive physical loads and awkward shoulder postures during pushing and pulling are risk factors for shoulder pain. Pushing a medicine cart is a major component of a work shift for nurses and medical assistants in hospitals and other health care facilities. A laboratory experiment was conducted to examine the effects of common factors (e.g., lane congestion, cart load stability, floor surface friction) on shoulder joint moment and shoulder elevation angle of participants during cart pushing. Participants pushed a medicine cart on straight tracks and turning around right-angle corners. Peak shoulder joint moments reached 25.1 Nm, 20.3 Nm, and 26.8 Nm for initial, transition, and turning phases of the pushing tasks, indicating that shoulder joint loading while pushing a medical cart is comparable to levels previously reported from heavy manual activities encountered in industry (e.g., garbage collection). Also, except for user experience, all other main study factors, including congestion level, cart load stability, location of transition strip, shoulder tendency, surface friction, and handedness, significantly influenced shoulder joint moment and shoulder elevation angle. The findings provide a better understanding of shoulder exposures associated with medicine cart operations and may be helpful in designing and optimizing the physical environment where medicine carts are used.

Geophex airborne unmanned survey system

International Nuclear Information System (INIS)

Won, I.J.; Taylor, D.W.A.

1995-01-01

The purpose of this effort is to design, construct, and evaluate a portable, remotely-piloted, airborne, geophysical survey system. This nonintrusive system will provide open-quotes stand-offclose quotes capability to conduct surveys and detect buried objects, structures, and conditions of interest at hazardous locations. This system permits two operators to rapidly conduct geophysical characterization of hazardous environmental sites. During a survey, the operators remain remote from, but within visual distance, of, the site. The sensor system never contacts the Earth, but can be positioned near the ground so that weak anomalies can be detected