Uranium content of petroleum by Fission track technique

International Nuclear Information System (INIS)

Paschaa, A.S.; Mafra, O.Y.; Oliveira, C.A.N.; Pinto, L.R.

1982-01-01

This paper examines the feasibility of the fission track registration technique to investigate the natural uranium concentration in petroleum. The application is briefly described and the results obtained indicate the presence of uranium concentrations in samples of Brazilian petroleum which are over the detection limit of the fission track technique. The irradiations were performed by using fluxes with predominance of thermal neutrons, which have a fission cross-section for U 235 equal to 579 barns. Since the neutron fluxes were not comp sed exclusively of thermal neutrons, fissions from fast neutrons would also be taken into account for U 238 and Th 232

A numerical model for the thermal history of rocks based on confined horizontal fission tracks

DEFF Research Database (Denmark)

Jensen, Peter Klint; Hansen, Kirsten; Kunzendorf, Helmar

1992-01-01

A numerical model for determination of the thermal history of rocks is presented. It is shown that the thermal history may be uniquely determined as a piece-by-piece linear function on the basis of etched confined, horizontal fission track length distributions, their surface densities, and the ur......A numerical model for determination of the thermal history of rocks is presented. It is shown that the thermal history may be uniquely determined as a piece-by-piece linear function on the basis of etched confined, horizontal fission track length distributions, their surface densities...

Application of fission track analysis to hydrocarbon exploration

International Nuclear Information System (INIS)

Duddy, I.R.; Green, P.F.; Gleadow, A.J.W.; Marshallsea, S.; Tingate, P.; Laslett, G.M.; Hegarty, K.A.; Lovering, J.F.

1985-01-01

The temperature range over which fission tracks in apatite show observable annealing effects coincides with that responsible for the maximum generation of liquid hydrocarbons. Work is currently in progress in a number of Australian and overseas sedimentary basins, applying Apatite Fission Track Analysis (AFTA) to investigate the thermal evolution of these hydrocarbon prospective regions

Uranium content of petroleum by fission track technique

International Nuclear Information System (INIS)

Paschoa, A.S.; Mafra, O.Y.; Oliveira, C.A.N. de; Pinto, L.R.

1981-03-01

The feasibility of the fission track registration technique to investigate the natural uranium concentration in petroleum is examined. The application of this technique to petroleum is briefly described and discussed critically. The results obtained so far indicate uranium concentrations in samples of Brazilian petroleum which are over the detect ion limit of fission track technique. (Author) [pt

Automatic counting of fission fragments tracks using the gas permeation technique

CERN Document Server

Yamazaki, I M

1999-01-01

An automatic counting system for fission tracks induced in a polycarbonate plastic Makrofol KG (10 mu m thickness) is described. The method is based on the gas transport mechanism proposed by Knudsen, where the gas permeability for a porous membrane is expected to be directly related to its track density. In this work, nitrogen permeabilities for several Makrofol films, with different fission track densities, have been measured using an adequate gas permeation system. The fission tracks were produced by irradiating Makrofol foils with a 252Cf calibrated source in a 2 pi geometry. A calibration curve fission track number versus nitrogen permeability has been obtained, for track densities higher than 1000/cm sup 2 , where the spark gap technique and the visual methods employing a microscope, are not appropriate for track counting.

Obsidian dating by fission track method

International Nuclear Information System (INIS)

Araya, A.M.O.

1990-12-01

The fission track method was employed to obtain the age of twelve obsidian sample from Ecuador. By using the plateau-age correction method, we obtained the true age of each sample and were able to identify four groups of ages in the studied area. Thereafter we studied the fading of fission tracks in two obsidian samples with different origins: Yanaurcu, Ecuador and Monte Arci, Italy. We constructed Arrhenius plots and calculated activation energies for both samples. The results from thermal annealing experiments were compared with theoretical curves obtained by integrating an equation proposed by Shukolyukov et al (1965). (author). 43 refs, 20 figs, 10 tabs

Optical efficiency for fission fragment track counting in Muscovite solid state track recorders

International Nuclear Information System (INIS)

Roberts, J.H.; Ruddy, F.H.; Gold, R.

1984-01-01

In order to determine absolute fission rates from thin actinide deposits placed in direct contact with Muscovite Solid State Track Recorders, it is necessary to know the efficiency with which fission fragment tracks are recorded. In this paper, a redetermination of the 'optical efficiency', i.e. the fraction of fission events recorded and observed in the Muscovite is reported. The value obtained from a well-calibrated thin deposit of 252 Cf and Muscovite etched about 90 min. in 49% HF at room temperature, is 0.9875 +- 0.0085. Manual counting was used. Preliminary results from a deposit of 242 Pu are also reported, along with preliminary comparisons of track counting with an automated system. Reasons for the discrepancy of the optical efficiency reported here with an earlier measurement are also reported. (author)

Fission-track studies of uranium distribution in geological samples

International Nuclear Information System (INIS)

Brynard, H.J.

1983-01-01

The standard method of studying uranium distribution in geological material by registration of fission tracks from the thermal neutron-induced fission of 235 U has been adapted for utilisation in the SAFARI-1 reactor at Pelindaba. The theory of fission-track registration as well as practical problems are discussed. The method has been applied to study uranium distribution in a variety of rock types and the results are discussed in this paper. The method is very sensitive and uranium present in quantities far below the detection limit of the microprobe have been detected

Optical efficiency for fission-fragment track counting in Muscovite Solid-State Track Recorders

International Nuclear Information System (INIS)

Roberts, J.H.; Ruddy, F.H.; Gold, R.

1983-07-01

In order to determine absolute fission rates from thin actinide deposits placed in direct contact with Muscovite Solid-State Track Recorders, it is necessary to know the efficiency with which fission-fragment tracks are recorded. In this paper, a redetermination of the optical efficiency, i.e., the fraction of fission events recorded and observed in the Muscovite, is reported. The value obtained from a well-calibrated thin deposit of 252 Cf and Muscovite etched about 90 min. in 49% HF at room temperature, is 0.9875 +- 0.0085. Manual counting was used. Preliminary results from a deposit of 242 Pu are also reported, along with preliminary comparisons of track counting with an automated system. Reasons for the discrepancy of the optical efficiency reported here with an earlier measurement are also reported. 5 references, 1 figure, 3 tables

Muon induced fission and fission track dating of minerals

International Nuclear Information System (INIS)

Marques, A.

1988-01-01

The effects of muon induced fission on geological dating of samples by the fission track method are evaluated for the case of muscovite minerals. It is found a small but significant effect, greater for the longer ages. Since calculations are developped under the hypothesis of constant atmosphere and primary cosmic ray flux it is suggested that any discrepancy found in ages of very old material that cannot be accounted for by well known environmental influences, be taken as an indication of variation on either the atmospheric stopping power or the intensity of cosmic radiation along the ages. (author) [pt

Dating by fission tracks in archaeology. 1. Principles and experimental methods

International Nuclear Information System (INIS)

Poupeau, G.; Zuleta, E.

1984-01-01

The principles of dating method by uranium fission tracks are shortly exposed. The conditions of application to the archaeology are discussed, in particular for the volcanic glasses, where the fossil fission tracks are often affected of a beginning of effacement. (L.C.) [pt

The fission track method

International Nuclear Information System (INIS)

Hansen, K.

1990-01-01

During the last decade fission track (FT) analysis has evolved as an important tool in exploration for hydrocarbon resources. Most important is this method's ability to yield information about temperatures at different times (history), and thus relate oil generation and time independently of other maturity parameters. The purpose of this paper is to introduce the basics of the method and give an example from the author's studies. (AB) (14 refs.)

Development of the fission fragment track registration technique for the determination of the uranium contamination

International Nuclear Information System (INIS)

Tanaka, E.M.

1979-01-01

The Fission Fragment Track Registration Technique is developed to measure the uranium concentration about microgram of uranium per litre of liquid samples. The drying method of drops on the detector (Makrofol KG) and a special sampling procedure to avoid the cumbersome high density of tracks formation at the edge of the deposition surface as a 'ring' is adopted. The samples are irradiated by neutrons produced by the IEA-R1 Reactor (thermal neutron flux about 10 12 neutrons/cm 2 .s) inducing the uranium fission. The tracks registered by the fission fragments in the detector are chemically enlarged and counted by an automatic couting system. By this method the uranium concentrations ranging from 0,9 to 7,6 microgram of uranium per litre, can be determined with precisions between 2,7% the greater and 23% to the lower concentration. The uranium concentration measurements in human hair and urine are made showing that this method is very useful to control and detect eventual uranium contamination [pt

The fission-track analysis: An alternative technique for provenance studies of prehistoric obsidian artefacts

CERN Document Server

Bellot-Gurlet, L; Dorighel, O; Oddone, M; Poupeau, G; Yegingil, Z

1999-01-01

Comparison of fission-track parameters - age and track densities - is an alternative tool for correlating obsidian artefacts with their potential natural sources. This method was applied by different fission-track groups in various regions and results were compared with those obtained using the more popular provenance identification techniques based on chemical composition studies. Hundreds of analyses prove that fission-track dating is a complementary technique which turns out to be very useful, specially when the chemical composition does not fully discriminate different sources. Archaeologically significant results were obtained applying the fission-track analysis in various regions of earth.

The fission-track analysis: An alternative technique for provenance studies of prehistoric obsidian artefacts

International Nuclear Information System (INIS)

Bellot-Gurlet, L.; Bigazzi, G.; Dorighel, O.; Oddone, M.; Poupeau, G.; Yegingil, Z.

1999-01-01

Comparison of fission-track parameters - age and track densities - is an alternative tool for correlating obsidian artefacts with their potential natural sources. This method was applied by different fission-track groups in various regions and results were compared with those obtained using the more popular provenance identification techniques based on chemical composition studies. Hundreds of analyses prove that fission-track dating is a complementary technique which turns out to be very useful, specially when the chemical composition does not fully discriminate different sources. Archaeologically significant results were obtained applying the fission-track analysis in various regions of earth

Fission tracks diameters in glasses

International Nuclear Information System (INIS)

Garzon Ruiperez, L.; Veiguela, J.

1974-01-01

Standard glass microscope slides have been irradiated with fission fragments from the uranium. The etching track conditions have been the same for the series, having changed the etching time only for each specimen. For each glass, a minimum of 250 measurements of the tracks diameters have been made, the distributions of which are the bimodal type. Diameters-etching dependence with time is roughly lineal. Energy determinations have been made with the help of the diameters-energy relations. The calculated values agree very well with the know ones. (author) [es

Liquid nitrogen enhancement of partially annealed fission tracks in glass; and reply

International Nuclear Information System (INIS)

Wagner, G.A.; Carpenter, B.S.; Pilione, L.J.; Gold, D.P.

1977-01-01

Pilione and Gold (Nature 262: 773 (1976)) stated that it was possible to reveal partially annealed fission tracks in glass by immersion in liquid N 2 , and that it was possible to increase the total number of etchable tracks by increasing the immersion time. The present authors attempted to duplicate the work of the former authors using the same glass. They found no significant change in the number of etchable tracks after immersion in liquid N 2 , and they concluded that the latter has no effect on annealed tracks in glass. Any observed enhancement of partially annealed tracks is probably a surface effect and has no effect on the interior matrix of the glass. A reply by Pilione and Gold is appended. (U.K.)

Fission track astrology of three Apollo 14 gas-rich breccias

Science.gov (United States)

Graf, H.; Shirck, J.; Sun, S.; Walker, R.

1973-01-01

The three Apollo 14 breccias 14301, 14313, and 14318 all show fission xenon due to the decay of Pu-244. To investigate possible in situ production of the fission gas, an analysis was made of the U-distribution in these three breccias. The major amount of the U lies in glass clasts and in matrix material and no more than 25% occurs in distinct high-U minerals. The U-distribution of each breccia is discussed in detail. Whitlockite grains in breccias 14301 and 14318 found with the U-mapping were etched and analyzed for fission tracks. The excess track densities are much smaller than indicated by the Xe-excess. Because of a preirradiation history documented by very high track densities in feldspar grains, however, it is impossible to attribute the excess tracks to the decay of Pu-244. A modified track method has been developed for measuring average U-concentrations in samples containing a heterogeneous distribution of U in the form of small high-U minerals. The method is briefly discussed, and results for the rocks 14301, 14313, 14318, 68815, 15595, and the soil 64421 are given.

Characterization of aerosols containing fissionable elements using solid-state track recorders

International Nuclear Information System (INIS)

Roberts, J.H.; Kafalenos, V.P.; Yule, T.J.

1976-01-01

An aerosol of U 3 O 3 highly enriched in 235 U was generated with a nebulizer from a suspension of U 3 O 8 powder in distilled water. The aerosol was collected on a membrane filter. Polycarbonate plastic, placed in good contact with the filter, was used to record fission tracks when the package was exposed to known fluences of slow neutrons. Fission-track stars associated with individual particles of U 3 O 8 were observed in the plastic. The fission-track distributions were converted to a particle size distribution for the aerosol. For a log normal distribution the geometric mean and standard deviation can be determined with better than 5% accuracy. This method can be applied to plutonium and other transuranic aerosols. (orig.) [de

Fission distribution measurements of Atucha's fuel pellets with solid state track detectors

International Nuclear Information System (INIS)

Ricabarra, M.D. Bovisio de; Waisman, Dina.

1979-08-01

Distribution of fissions in a UO 2 rod has been measured by means of solid state detectors. Mica muscovite and Makrofol-N detectors were used in the experiment. The merits of mica muscovite relative to the Makrofol-N for the detection of fission fragments have been verified. However both fission track detectors closely agree (0,5%) in the final fission distribution of the UO 2 rod. Sensitivity of the detectors shows to be linear in the range between 50.000and 360.000 fission tracks per square centimeter. Due to the high spatial resolution this method is better than any other technique. Determination were made in UO 2 pellets similar to the fuel element of the Atucha reactor. The average fission rate in the rod has been measured within 0,8% error, and provides an accurate determination for the distribution of fissions in the rod wich is needed for the determination of energy liberated per fission in the natural uranium rod.(author) [es

Fission track thermochronology : reconstructing the thermal and tectonic evolution of the crust

International Nuclear Information System (INIS)

Gleadow, A.J.W.

1990-01-01

The basis and current status of fission track analysis is reviewed showing the kinds of patterns of fission track parameters which result from a variety of thermal and tectonic histories. Fission track thermochronology is a well established method for reconstructing the thermal histories of rocks with particularly important applications in tectonic studies. Quantitative modelling of the thermal annealing of tracks in apatite shows that distinctive profiles of apparent fission track age can be related to a number of simple thermal history styles. The main types of profiles observed tend to be either an essentially linear decrease of apparent age with increasing depth, which relates to continuous uplift and denudation, or a concave-upwards profile produced by partial annealing in environments of tectonic stability or burial. More complex thermal histories produce compound profiles which are essentially just combinations of these two elements. Track length information allows the apparent age profiles to be interpreted in much greater detail. Examples of the major profile types have been identified in various geological environments and can be analysed to give information about, for example, uplift and denudation rates, the timing of uplift or low-grade thermal events and maximum palaeotemperatures experienced during burial. 25 refs., 8 figs

Mass distribution of fission fragments using SSNTDs based image analysis system

International Nuclear Information System (INIS)

Kolekar, R.V.; Sharma, D.N.

2006-01-01

Lexan polycarbonate track detector was used to obtain mass distribution of fission fragments from 252 Cf planchette source, Normally, if the fission fragments are incident perpendicular to the lexan surface, the diameter of heavy fragment is greater than that of lighter fragment. In practical problems fission fragments are incident on the detector at all angles. So, in the present experiment, lexan detector was exposed to 252 Cf planchette source in 2π geometry. Fission fragments were incident on the detector with various angles. So the projected fission track length for fission fragment of same energy is different because of different angle of incidence. Image analysis software was used to measure the projected track length. But the problem is that for fission fragment having greater angle of incidence the entire track length is not focused on the surface. So reduced track length is measured. This problem is solved by taking two images, one at the surface and one at the tip of track and then overlapping both the images using image analysis software. The projected track length and the depth of the track were used to get the angle of incidence. Fission track lengths were measured for same angle of incidence. In all 500 track lengths were measured and plot for mass distribution for fission fragment was obtained.(author)

The thermal history of the Bowen Basin: a comparison of apatite fission track analysis and vitrinite reflectance

International Nuclear Information System (INIS)

Marshallsea, S.J.

1987-01-01

Vitrinite reflectance and apatite fission-track analysis (AFTA) are two techiques widely used to assess paleotemperatures of the order of 20-120 deg.C. in sedimentary basins. Whereas vitrinite reflectance is essentially a qualitative technique that gives an integrated measure of the entire thermal history, AFTA can reveal information on the variation of paleotemperatures through time because fission-tracks in apatite are continually produced throughout geological time. An apatite fission track study of the Upper Permian units of the Bowen Basin has offered the opportunity to compare the two paleotemperature indicators and place constraints on the timing of maximum paleotemperatures. The regional pattern of apatite fission-track ages closely coincides with the vitrinite reflectance indicating that maximum paleotemperatures have varied across the Basin with the central region of the Bowen Basin experiencing highest paleotemperatures. The reduction in apatite reflectance fission-track age with increasing reflectance represents the progressive annealing at temperatures around 60-120 deg. C. of those fission-tracks formed prior to the time of maximum temperatures. In those samples giving the youngest apatite fission-track ages all tacks were totally annealed at this time, and the fission-track age in these samples, in the range 90-120 Myr, indicate the time of cooling from the thermal maximum in the Early Cretaceous. 1 ref

On methodical problems in estimating geological temperature and time from measurements of fission tracks in apatite

International Nuclear Information System (INIS)

Jonckheere, R.

2003-01-01

The results of apatite fission-track modelling are only as accurate as the method, and depend on the assumption that the processes involved in the annealing of fossil tracks over geological times are the same as those responsible for the annealing of induced fission tracks in laboratory experiments. This has hitherto been assumed rather than demonstrated. The present critical discussion identifies a number of methodical problems from an examination of the available data on age standards, borehole samples and samples studied in the framework of geological investigations. These problems are related to low- ( 60 deg. C) annealing on a geological timescale and to the procedures used for calculating temperature-time paths from the fission-track data. It is concluded that it is not established that the relationship between track length and track density and the appearance of unetchable gaps, observed in laboratory annealing experiments on induced tracks, can be extrapolated to the annealing of fossil tracks on a geological timescale. This in turn casts doubt on the central principle of equivalent time. That such uncertainties still exist is in no small part due to an insufficient understanding of the formation, structure and properties of fission tracks at the atomic scale and to a lack of attention to the details of track revelation. The methodical implications of discrepancies between fission track results and the independent geological evidence are rarely considered. This presents a strong case for the re-involvement of track physicists in fundamental fission track research

Studies on fission tracks and distributions of uranium and rare earths in granite materials

International Nuclear Information System (INIS)

Matsuda, Hiroshi; Sakanoue, Masanobu

1987-01-01

Many materials contain fossil records of the slow spontaneous fission of uranium they contain as an impurity. Fission fragments, heavy charged particles released in each fission event, produce microscopic trails of radiation damage that may persist over geological times and may be developed to a size observable under an optical microscope by a suitable etching treatment. Such tracks are also produced by fissions induced by thermal neutron irradiation of the uranium. When the material is heated sufficiently, it anneals and the the microscopic trails become shorter and narrower. The track density decreases, because the chemical etchant will not reach some of the shortened tracks. Measurements of track densities before and after annealing can be used, along with laboratory studies of annealing rates, to determine the annealing temperature. Also, the track density of induced fissions is related to the concentration of uranium and the fluence of neutrons to which it was exposed. If the track density due to induced fissions can be distinguished from that due to fossil tracks, estimates of either the concentration or the fluence can be made if the other is known. Two such materials (one a fragment of a granite paving stone, the other a piece of stained glass from a cathedral window) that had been exposed to the atomic bomb at Nagasaki were used in the present work. The fossil record in zircons in the granite was used to estimate the temperature to which it had been exposed in the bombing. Induced fissions were used to estimate the concentration of uranium in the zircons. Nonuniform heating and cooling and nearly uniform exposure to the neutrons make the granite sample unsuitable for determining the neutron fluence from the bomb. Induced fissions in the stained glass were used to estimate the concentration of uranium and the thermal neutron fluence from the A-bomb. Annealing of tracks in glass was also studied

Thermal significance of fission-track length distributions

International Nuclear Information System (INIS)

Crowley, K.D.

1985-01-01

The semi-analytical solution of an equation describing the production and shortening of fission tracks in apatite suggests that certain thermal histories have unique length-distribution 'signatures'. Isothermal-heating histories should be characterized by flattened, length-shortened distributions; step-heating histories should be characterized by bimodal track length distributions; and linear-cooling histories should be characterized by negatively skewed, length-shortened distributions. The model formulated here to investigate track length distributions can be used to constrain the thermal histories of natural samples for which unbiased track length data are available - provided that the geologic history of the system of interest can be used to partially constrain one of the unknowns in the model equations, time or temperature. (author)

Fission tracks dating for obsidian

International Nuclear Information System (INIS)

Picon, C.

1991-01-01

Obsidian from South America are dated by fission tracks methods. Samples are irradiated in a nuclear reactor with a flux of 10 15 n/cm 2 . Results, corrected by 'Plateau' methods, are the following: obsidian from Bolivia: 4.14 x 10 6 yr., Ecuador: 8.79 x 10 5 yr., Colombia: 3.52 x 10 6 yr., Peru: 6.55 x 10 6 yr., Chile: 1.13 x 10 6 yr. (MMZ). 5 refs., 3 tabs

The etching property of the surface of CR-39 and the track core radius of fission fragment

CERN Document Server

Mineyama, D; Yamauchi, T; Oda, K; El-Rahman, A

2002-01-01

The etch pits of fission fragments in CR-39 detector have been observed carefully using an atomic force microscope (AFM) after extremely short chemical etching in stirred 6N KOH solution kept at 70degC. It was found that there existed a thin layer where the bulk etch rate is relativity from large the etch-pit growth curve for the etching duration between 10 and 1800 seconds. The track core radius of fission fragment was evaluated to be about 6 nm from the extrapolation of the growth curve in a thinner region. (author)

Apatite fission track dating and thermal history of Qing-He region in Altay Mountains

International Nuclear Information System (INIS)

Bao Zengkuan; Chinese Academy of Sciences, Beijing; Yuan Wanming; Dong Jinquan; Gao Shaokai

2005-01-01

Fission track ages (FTA) and track lengths of apatite from Qing-He diorite intrusion in Altay Mountains are measured. Apatite fission track ages of three diorite samples is range from (78±5) Ma to (95 ± 5) Ma, and the lengths of horizontal confined spontaneous fission tracks are (13.2 ± 1.2)-(13.5 ±1.3) μm. The distribution of the track length is narrow and symmetrical with a mean length of approximately 13.3 μm and a standard deviation of around 0.1 μm. The inverse modeling results show that thermal history of this region has four stages, two rapid uplift of this region still existed magmatic intrusion and tectonic movements in Yanshanian. (authors)

Uranium fission track length distribution modelling for retracing chronothermometrical history of minerals

International Nuclear Information System (INIS)

Rebetez, M.

1987-01-01

Spontaneous fission of uranium 238 isotope contained in certain minerals creates damage zones called latent tracks, that can be etched chemically. The observation of these etched tracks and the measurement of their characteristics using an optical microscope are the basis of several applications in the domain of the earth sciences. First, the determination of their densities permits dating a mineral and establishing uranium mapping of rocks. Second, the measurement of their lengths can be a good source of information for retracing the thermal and tectonic history of the sample. The study of the partial annealing of tracks in apatite appears to be the ideal indicator for the evaluation of petroleum potential of a sedimentary basin. To allow the development of this application, it is necessary to devise a theoretical model of track length distributions. The model which is proposed takes into account the most realistic hypotheses concerning registration, etching and observation of tracks. The characteristics of surface tracks (projected lengths, depths, inclination angles, real lengths) and confined tracks (Track IN Track and Track IN Cleavage) are calculated. Surface tracks and confined tracks are perfectly complementary for chrono-thermometric interpretation of complex geological histories. The method is applied to the case of two samples with different tectonic history, issued from the cretaceous alcalin magmatism from the Pyrenees (Bilbao, Spain). A graphic method of distribution deconvolution is proposed. Finally, the uranium migration, depending on the hydrothermal alteration, is studied on the granite from Auriat (France) [fr

Technique of neutron-induced (fission-track) autoradiography with histological detail

International Nuclear Information System (INIS)

Smith, J.M.; Taylor, G.N.; Jee, W.S.S.

1980-01-01

The primary advantage of neutron-induced or fission-track autoradiography compared with conventional autoradiography is that for low concentrations of fissile nuclides prohibitively long exposure times may be avoided. However, it is difficult to produce imaging of biological structures on the neutron-induced autoradiograph which would allow localization of the nuclide histologically. The technique presented circumvents this difficulty using a thin polycarbonate film applied to the histologically stained tissue section mounted on a quartz substrate. After irradiation of the tissue section with an appropriate thermal neutron flux, the fission fragment tracks are revealed by etching the film with KOH. The tracks, superimposed on the stained tissue, may be observed under the light microscope in the same manner as for conventional nuclear emulsion autoradiography

Fission-track evidence of tectonic evolution in the northwestern Qaidam Basin, China

Science.gov (United States)

Sun, Guo-Qiang; Liu, Wei-Ming; Guo, Jia-Jia; Wang, Ye-Tong

2018-02-01

Fission-track dating was conducted on zircons and apatites from 11 cores of the upper Xiaganchaigou Formation and lower Shangganchaigou Formation (northwestern Qaidam Basin). The obtained apatite fission-track age is 3.1-61.9 Ma, and the zircon fission-track age is 49.2-123.5 Ma. Although the average apatite age is consistent with ages predicted from the stratigraphy, nine of the 11 apatite fission-track ages have P(χ2) 5%, exhibiting consistent characteristics and indicating that zircons retain provenance age information after burial. From the zircon and apatite ages, the fission-track length distribution, and the geological setting, the northwestern Qaidam Basin has experienced two tectonothermal events since the Late Mesozoic, at 39.1 ± 9.3 to 133.7 ± 6.6 Ma and 1.2 ± 0.6 to 32.0 ± 3.0 Ma. The earlier (39.1-133.7 Ma) tectonothermal event resulted from the initial collision of the Indian and Eurasian plates. As a consequence of the collision, the Altyn Tagh fault, which forms the northwestern boundary of the Qaidam Basin, began to develop. Subsequently, uplift of the Altyn Tagh mountains began and the northwestern depression of the Qaidam Basin started to form. The later (1.2-32.0 Ma) tectonothermal event resulted from further collision of the Indian and Eurasian plates along the Yarlung Tsangpo suture zone. Strata in the Qaidam Basin were further deformed by transpression in this period and this period played a crucial role in petroleum accumulation.

Use of fission track for deciphering the dissolution mechanism of silicates glasses

International Nuclear Information System (INIS)

Petit, J.C.; Brousse, C.

1985-09-01

Polished sections of silicate glasses containing latent or pre-etched fission tracks have been subjected to corrosion in deionized water or NaCl brines at 20, 50 and 100 0 C. The evolution of glass surface helps deciphering among reported dissolution models. We show that ion-exchange is dominant in simple glasses while in complex ones, dissolution involves several steps including an in-situ transformation of the pristine material and a reprecipitation of dissolved species

Dating by fission track method: study of neutron dosimetry with natural uranium thin films

International Nuclear Information System (INIS)

Iunes, P.J.

1990-06-01

Fission track dating is described, focalizing the problem of the decay constant for spontaneous fission of 238 U and the use of neutron dosimetry in fission track analysis. Experimental procedures using thin films of natural uranium as neutron dosimeters and its results are presented. The author shows a intercomparison between different thin films and between the dosimetry with thin film and other dosimetries. (M.V.M.). 52 refs, 12 figs, 9 tabs

Contribution of the fission-track method to the study of the Alpine chains: relationship between tectonics and metamorphism

International Nuclear Information System (INIS)

Carpena, J.

1984-01-01

The fission-track method allows geologists to date rocks and to get information on the thermal history of rocks. Fission tracks in minerals are essentially due to the spontaneous fission of uranium 238. The knowledge of the density of tracks and the concentration of uranium 238 lead to the determination of the age of the rock. The irradiation in a neutron flux of a sample of the rock allows the determination of the concentration of uranium. The age obtained is in fact an apparent age that does not take into account possible geological annealing process that may erase fission tracks, some corrections are then necessary. The first part of this work details the fission-track method, its scope and limitations. It is shown that fission-track method on apatites can reveal the thermal evolution of the rock and that the same method used on zircons can give information of the setting of volcanic rocks. The second part is dedicated to the contribution of the fission-track method to a both dating and thermal evolution study of a french-italian part of the Alpine chain

Inverse modelling of thermal histories with apatite fission tracks

International Nuclear Information System (INIS)

El Lmrani, A.; Zine El Abidine, H.; Limouri, M.; Essaid, A.; POupeau, G.

1998-01-01

The problem of modelling thermal histories lies in the exploration of a time-temperature space, usually so broad, in order to identify the optimal paths. For overcoming this difficulty, many approaches were proposed, using linear and non-linear optimisation algorithms. Generally, these approaches do not take into account the experimental data (fission track age [FTA] and fission track length distribution [FTLD]) to better aim the search strategy. The present work shows that experimental data hold some precious information, for which it should be known how to extract it. In fact, it allows us to tighten the time-temperature space of search, supposed to contain the optimal solutions. A genetic algorithm is also used in this work to perform the search for these optimal solutions. (authors)

Etching of fission tracks in silicate glasses by means of deionized water

International Nuclear Information System (INIS)

Dran, J.C.; Petit, J.C.

1985-09-01

Fission tracks have been revealed in silicate glasses with deionized water. Their sharp conical shape implies a marked enhancement of the dissolution rate along their core and consequently a cone angle and an etching efficiency (close to 100%) much higher than previously reported for glasses. We show that etching of fission tracks in natural environments has generally very limited geochemical implications except in specific cases such as that found in the Oklo uranium ores

Naturally etched tracks in apatites and the correction of fission track dating

CERN Document Server

Tien, J L

1999-01-01

Naturally etched tracks have been found in apatites from the rapid cooled, high-level Kunon pluton in the Zhangzhou Igneous Complex, SE China. This is manifested by the fact that the apatite fission track (FT) age derived from conventional counting of spontaneous and induced tracks yields a result of 140.6+-6.5 Ma, which is much older than the ages determined using other methods on different minerals from the same rock. When tracks are observed after etching the polished inner sections of the apatite grains, the naturally etched tracks characterized by having hazy boundaries can be distinguished from the normal tracks with sharp boundaries. The age obtained by omitting these fading-resistant hazy tracks, 76.5+-4.0 Ma, indicates the time of the Kunon pluton cooling down to approx 100 deg. C. The corrected peak age (73.8 Ma) is consistent with the other apatite FT peak ages (79.2 to 70.2 Ma) of the nearly contemporaneous plutons in the same igneous complex.

Critical angles for fission fragment registrations in some solid state track detectors

Energy Technology Data Exchange (ETDEWEB)

Belyaev, A D; Bahromi, I I; Beresina, N V [AN Uzbekskoj SSR, Tashkent. Inst. Yadernoj Fiziki; and others

1980-03-01

In studies of the registration efficiency of various solid state track detectors (polycarbonate, polyethyleneterephthalate, cellulose nitrate and muscovite) the detectors were irradiated with spontaneous fission fragments from /sup 252/Cf and with fission fragments from /sup 235/U separated according to mass and energy. Experimental details are given. Critical angles for the registration of fission fragments in the various detectors are given for specified energies and masses.

SOFTWARE MODULE FOR CONSTRUCTING THE INTERSECTION OF TRIANGULATED SURFACES

Directory of Open Access Journals (Sweden)

Vladimir V. Kurgansky

2018-03-01

Full Text Available The effective algorithm is proposed for implementing Boolean operations over triangulated surfaces, namely, disjunction, conjunction and Boolean difference, and its software implementation. The idea consists in as follow. The first step is to determine pairs of intersecting triangles: localizing the intersection of the two surfaces using the bounding volume of the parallelepipeds and the future of their intersection. The second step is constructing an intersection line for each pair of triangles: a pair of intersecting triangles is selected, and the segment along which they intersect is constructed. Further, thanks to the entered data structure, "adjacent" triangles are selected, among which are selected those that form the intersecting pair. The process described above continues as long as such triangles can be detected. After that the triangles involved in the intersection are retriangulated. For each triangle, all the edges are known on which it intersects with triangles from another surface. These edges are structural edges in the triangulation problem with constraints for a given triangle. The third step is to combine all surfaces into one surface. Further, subsurfaces are constructed along the loops of intersection limited by the found loops. Since the intersection line of the surfaces was constructed in sequence, it is possible to specify the direction of each edge. Any edge from the intersection line is selected. The triangle is added to the subsurface under construction, which includes this edge and its orientation is the same as the direction of the edge. The edge which was selected previously is deleted from intersection line, but two new edges are added is the remaining edges of added triangle. The third step is to combine all surfaces into one surface. Further, subsurfaces are constructed along the cycles of intersection limited by the found cycles. Since the intersection line of the surfaces was constructed in sequence, it is

Fission Surface Power Technology Development Update

Science.gov (United States)

Palac, Donald T.; Mason, Lee S.; Houts, Michael G.; Harlow, Scott

2011-01-01

Power is a critical consideration in planning exploration of the surfaces of the Moon, Mars, and places beyond. Nuclear power is an important option, especially for locations in the solar system where sunlight is limited or environmental conditions are challenging (e.g., extreme cold, dust storms). NASA and the Department of Energy are maintaining the option for fission surface power for the Moon and Mars by developing and demonstrating technology for a fission surface power system. The Fission Surface Power Systems project has focused on subscale component and subsystem demonstrations to address the feasibility of a low-risk, low-cost approach to space nuclear power for surface missions. Laboratory demonstrations of the liquid metal pump, reactor control drum drive, power conversion, heat rejection, and power management and distribution technologies have validated that the fundamental characteristics and performance of these components and subsystems are consistent with a Fission Surface Power preliminary reference concept. In addition, subscale versions of a non-nuclear reactor simulator, using electric resistance heating in place of the reactor fuel, have been built and operated with liquid metal sodium-potassium and helium/xenon gas heat transfer loops, demonstrating the viability of establishing system-level performance and characteristics of fission surface power technologies without requiring a nuclear reactor. While some component and subsystem testing will continue through 2011 and beyond, the results to date provide sufficient confidence to proceed with system level technology readiness demonstration. To demonstrate the system level readiness of fission surface power in an operationally relevant environment (the primary goal of the Fission Surface Power Systems project), a full scale, 1/4 power Technology Demonstration Unit (TDU) is under development. The TDU will consist of a non-nuclear reactor simulator, a sodium-potassium heat transfer loop, a power

The changing face of fission track dating: recent advances

International Nuclear Information System (INIS)

Green, P.F.; Duddy, I.R.; Gleadow, A.J.W.; Laslett, G.M.; Hegarty, K.A.; Lovering, J.F.

1985-01-01

Fission Track Dating has undergone something of a renaissance in recent years. What began as a rather unreliable method of geochronology has now become a rigorous and dependable means of measuring not only geological time but also paleotemperatures. Developments such as the zeta calibration technique, rigorous satistical data analysis, investigation of confined track lengths and detailed studies of annealing behaviour have all contributed to advances in the technique

Denudation history of the Snowy Mountains: constraints from apatite fission track thermochronology

International Nuclear Information System (INIS)

Kohn, B.P.; Gleadow, A.J.W.; Cox, S.J.D.

1999-01-01

Apatite fission track thermo chronology from Early Palaeozoic granitoids centred around the Kosciuszko massif of the Snowy Mountains, records a denudation history that was episodic and highly variable. The form of the apatite fission track age profile assembled from vertical sections and hydro-electric tunnels traversing the mountains, together with numerical forward modelling, provide strong evidence for two episodes of accelerated denudation, commencing in Late Permian - Early Triassic (ca 270 250 Ma) and mid-Cretaceous (ca 110-100 Ma) times, and a possible third episode in the Cenozoic. Denudation commencing in the Late Permian - Early Triassic wins widespread in the eastern and Central Snowy Mountains area, continued through much of the Triassic, and amounted to at least ∼2.0-2,4 km. This episode was probably the geomorphic response to the Hunter-Bowen Orogeny. Post-Triassic denudation to the present in these areas amounted to ∼2.0-2.2 km. Unambiguous evidence for mid-Cretaceous cooling and possible later cooling is confined to a north-south-trending sinuous belt, up to ∼15km wide by at least 35km long, of major reactivated Palaeozoic faults on the western side of the mountains. This zone is the most deeply exposed area of the Kosciuszko block. Denudation accompanying these later events totalled up to ∼1.8-2.0 km and ∼2.0 2.25 km respectively. Mid-Cretaceous denudation marks the onset of renewed tectonic activity in the south-eastern highlands following a period of relative quiescence since the Late Triassic, and establishes a temporal link with the onset of extension related to the opening of the Tasman Sea. Much of the present day relief of the mountains resulted from surface uplift which disrupted the post-mid-Cretaceous apatite fission track profile by variable offsets on faults. Copyright (1999) Geological Society of Australia

Fission track dating: methodology and thermo-chronological applications in alpine and continental margin contexts

International Nuclear Information System (INIS)

Sabil, N.

1995-06-01

The fission track dating method has proved to be unique in thermo-chronology by its capability to describe the final phases of the cooling history and denudation of metamorphic massifs, like the thermal history of sedimentary formations or the dating of some volcanic materials. In this work we describe this method and present a series of new analytic techniques and calibrations which we realised in the aim of further use in geology. We discuss a few examples of such applications. In the french Occidental Alps, the analysis of fission track on apatite samples from the granites of the Sept Laux (Belledonne massif), in the Eau d' Olle valley, suggests that this method could bring a contribution to the actual discussion about the origin of some alpine valleys. The fission track method suggests that the opening of this valley could be the consequence of an active faulting from the middle Miocene until the present. The characterization of fluvial deposits through their detrital apatites fission tracks record could eventually be used to study river captures related to changes tectonic regimes. Therefore we studied the apatites of a paleo-delta located in the Isere middle valley at the sub-alpine 'sillon' level, and of two valleys, those of the Arc and of the Breda, located up the delta. The distribution of the fission track ages of those mineraIs has not confirmed a previously suggested model, which proposed that the studied paleo-delta could be associated with a paleo-Arc rather than a paleo-Breda. In the Moroccan Occidental Meseta, three granitic massifs located in the Rehamna have been selected for a thermo-chronological study. The analysis of the fission track in zircons and apatites of these granites recorded the thermo-tectonic events which have affected the Meseta ever since the opening of the Central Atlantic Ocean some 200 Ma ago. We show how a numerical simulation model recently (1994) proposed for the analysis of fission track in apatites allows us to specify

Characteristics of diallyl phthalate resin as a fission track detector

CERN Document Server

Tsuruta, T

1999-01-01

Diallyl phthalate (DAP) resin plates were irradiated with fission fragments, and then etched in aqueous solution of KOH. Etched tracks were observed and counted by using an optical microscope. The detection efficiency of fission fragments was about 100% for both perpendicular and random incidence. DAP plates were insensitive to alpha particles and fast neutrons. These characteristics are suitable for detecting selected fission fragments, which coexist with alpha particles or fast neutrons. DAP plates are valuable for quantitative analysis of fissionable materials and neutron dosimetry. DAP and allyl diglycol carbonate (CR-39) were formed into copolymers in various ratios. The copolymers showed intermediate characteristics between DAP and CR-39. The fabrication of the copolymers made it possible to control the discrimination level for detection of heavy charged particles.

Thermal annealing of fission tracks in fluorapatite, chlorapatite, manganoanapatite, and Durango apatite: experimental results

International Nuclear Information System (INIS)

Ravenhurst, C.E.; Roden-Tice, M.K.; Miller, D.S.

2003-01-01

It is well known that the optically measured lengths of fission tracks in apatite crystals are a function of etching conditions, crystallographic orientation of the track, composition of the crystal, and the state of thermal annealing. In this study we standardize etching conditions and optimize track length measurability by etching until etch pits formed at the surface of each apatite crystal reached widths of about 0.74 μm. Etching times using 5M HNO 3 at 21 o C were 31 s for Otter Lake, Quebec, fluorapatite; 47 s for Durango, Mexico, apatite; 33 s for Portland, Connecticut, manganoanapatite; and 11 s for Bamle, Norway, chlorapatite. An etching experiment using two etchant strengths (5M and 1.6M HNO 3 ) revealed that, despite significant differences in etch pit shape, fission-track length anisotropy with respect to crystallographic orientation of the tracks is not a chemical etching effect. A series of 227 constant-temperature annealing experiments were carried out on nuclear reactor induced tracks in oriented slices of the apatites. After etching, crystallographic orientations of tracks were measured along with their lengths. The 200-300 track lengths measured for each slice were ellipse-fitted to give the major (c crystallographic direction) and minor (a crystallographic direction) semi-axes used to calculate equivalent isotropic lengths. The equivalent isotropic length is more useful than mean length for thermal history analysis because the variation caused by anisotropy has been removed. Using normalized etching procedures and equivalent isotropic length data, we found that the fluorapatite anneals most readily, followed by Durango apatite, manganoanapatite, and lastly chlorapatite. (author)

Irradiation positions for fission-track dating in the University of Pavia TRIGA Mark II nuclear reactor

International Nuclear Information System (INIS)

Oddone, Massimo; Meloni, Sandro; Balestrieri, Maria Laura; Bigazzi, Giulio

2002-01-01

An irradiation position arranged is described in the present paper for fission-track dating in the Triga Mark II reactor of the University of Pavia. Fluence values determined using the NIST glass standard SRM 962a for fission-track dating and the traditional metal foils are compared. Relatively good neutron thermalization (φ th /φ f = 0.956) and lack of significant fluence spatial gradients are good factors for fission-track dating. Finally, international age standards (or putative age standards) irradiated in this new position yielded results consistent with independent reference ages. (author)

Solid state nuclear track detectors in the measurement of alpha to fission branching ratios of heavy actinides

International Nuclear Information System (INIS)

Pandey, A.K.; Sharma, R.C.; Padalkar, S.K.; Kalsi, P.C.; Iyer, R.H.

1992-01-01

A sequential etching procedure for revelation of alpha and fission tracks in CR-39 was developed and optimized. Using this technique alpha and fission tracks can be differentiated unambiguously because of significant differences in their sizes and etching times. This registration and revelation procedure for alpha and fission tracks may be used for the studies of half lives, alpha to fission branching ratios and identification of radionuclides based on their decay schemes. It has the added advantage that both alpha decay and fission events can be studied using one detector and hence uncertainties related to efficiency, registration geometry, registration times, amount of radionuclides etc can be eliminated or minimized. The effects of neutron, gamma and alpha radiations on the alpha and fission fragment tracks registration and revelation properties of CR-39 detectors [CR-39, CR-39 (DOP)] were also studied. The IR spectra were also studied to find out the nature of chemical changes produced by these radiations on CR-39. (author). 32 refs., 7 figs., 4 tabs

Natural uranium impurities in fission track detectors and associated geocronological parameters

International Nuclear Information System (INIS)

Ricabarra, G.H.; Bovisio de Ricabarra, M.D.; Waisman, Dina; Faradjie de Turjanski, Rosa

1981-01-01

A technique, based in counting neutron induced fission tracks, has been developed for the measurement of uranium impurities in mica. Uranium concentrations of 10 -10 and 10 -9 (U atom/mica atom) have been measured. As a part of the development of this technique, the mica geological age was also measured, by fossil and induced track detection. The agreement obtained by this method, T = (472+-52) x 10 6 years with that of (450+-15) x 10 6 years obtained by the Ar-K technique is satisfactory and is an indirect test of the fission track technique used. A careful analysis of the neutron field parameters and nuclear data used in the age determination was made. This analysis is useful for applications in geocronology. According to this analysis a value of lambdasub(f)=(7.1+-0.1) x 10 -17 years -1 is recommended for the spontaneous fission of U238. However, in order to compare the results, the quoted age, T=(472+-52) x 10 6 years, was obtained with the generally accepted value of lambdasub(f)=(6.85-0.20) x 10 -17 years -1 (Fleischer and Price 1964). (author) [es

The quantitative determination of uranium in human hair by fission track measurements

International Nuclear Information System (INIS)

Wilson, D.J.; Bentley, K.W.

1985-01-01

Human hairs containing a uranium burden were placed in contact with a mica sheet as the recording matrix and irradiated in a thermal neutron flux. The fission fragment tracks penetrating the mica were etched and counted. Calculations have been made to show the losses due to the fission fragment range being less than the diameter of the hair and for the variation of track density with distance from the line of contact between the hair and the mica. Experimental data from 50 μm diameter hair and those derived by calculation were compared. (author)

A numerical model for the thermal history of rocks based on confined horizontal fission tracks

International Nuclear Information System (INIS)

Jensen, P.K.; Kunzendorf, Helmar; Hansen, Kirsten

1992-01-01

A numerical model for determination of the thermal history of rocks is presented. It is shown that the thermal history may be uniquely determined as a piece-by-piece linear function on the basis of etched confined, horizontal fission track length distributions, their surface densities, and the uranium content. The initial track length distribution is taken into account. A relation between the measured track length distribution and age is given which includes correction for partial annealing. The annealing model used is the fanning Arrhenius plot. It is shown that track length distributions measured in transmitted light are biased favouring short tracks compared with measurements in reflected light. Testing of the model is performed on apatites from a tuffaceous sandstone from Bornholm (Denmark) yielding an estimate of the thermal history for the period of about 280 Ma back in time. (author)

A new look at statistics in fission-track dating

International Nuclear Information System (INIS)

Green, P.F.

1981-01-01

Poissonian errors, as routinely applied in fission-track dating, represent a limiting case, which may not always be attainable in practice. Other experimental factors may introduce additional non-Poissonian errors, which must be taken into account. In the population method, sampling of non-homogeneous uranium distributions introduces experimental error. In the external detector method (EDM), many factors exist to introduce such error. Simply quoting total numbers of spontaneous and induced fission tracks obtained by the EDM may disguise the possible influence of experimental variation. The present work concentrates on the EDM, and describes a test which has recently been proposed to detect the presence of experimental error in EDM analyses. The question of an alternative analysis for cases where such error is present is also considered. A method of presenting EDM data is suggested, which allows assessment of the importance of experimental errors. (author)

Quantitative Identification of the Annealing Degree of Apatite Fission Tracks Using Terahertz Time Domain Spectroscopy (THz-TDS).

Science.gov (United States)

Wu, Hang; Wu, Shixiang; Qiu, Nansheng; Chang, Jian; Bao, Rima; Zhang, Xin; Liu, Nian; Liu, Shuai

2018-01-01

Apatite fission-track (AFT) analysis, a widely used low-temperature thermochronology method, can provide details of the hydrocarbon generation history of source rocks for use in hydrocarbon exploration. The AFT method is based on the annealing behavior of fission tracks generated by 238 U fission in apatite particles during geological history. Due to the cumbersome experimental steps and high expense, it is imperative to find an efficient and inexpensive technique to determinate the annealing degree of AFT. In this study, on the basis of the ellipsoid configuration of tracks, the track volume fraction model (TVFM) is established and the fission-track volume index is proposed. Furthermore, terahertz time domain spectroscopy (THz-TDS) is used for the first time to identify the variation of the AFT annealing degree of Durango apatite particles heated at 20, 275, 300, 325, 450, and 500 ℃ for 10 h. The THz absorbance of the sample increases with the degree of annealing. In addition, the THz absorption index is exponentially related to annealing temperature and can be used to characterize the fission-track volume index. Terahertz time domain spectroscopy can be an ancillary technique for AFT thermochronological research. More work is urgently needed to extrapolate experimental data to geological conditions.

Disintegration constant of uranium-238 by spontaneous fission redetermined by glass track method

International Nuclear Information System (INIS)

Lima Medeiros, E. de.

1978-01-01

The disintegration constant of U 238 by spontaneous fission using glass as fission fragment detector was redetermined. A film of natural uranium (UO 3 ) prepared by chemical methods on the glass lamina was used in a long time experience of exposure (about 16 years). The good conditions of sample preparation and storage allow to observe, after chemical etching, fission fragment tracks. (M.C.K.) [pt

U and Th thin film neutron dosimetry for fission-track dating: application to the age standard Moldavite

International Nuclear Information System (INIS)

Iunes, P.J.; Bigazzi, G.; Hadler Neto, J.C.; Laurenzi, M.A.; Balestrieri, M.L.; Norelli, P.; Osorio Araya, A.M.; Guedes, S.; Tello S, C.A.; Paulo, S.R.; Moreira, P.A.F.P.; Palissari, R.; Curvo, E.A.C.

2005-01-01

Neutron dosimetry based on U and Th thin films was used for fission-track dating of the age standard Moldavite, the central European tektite, from the Middle Miocene deposit of Jankov (southern Bohemia, Czech Republic). Our fission-track age (13.98+/-0.58Ma) agrees with a recent 40 Ar/ 39 Ar age, 14.34+/-0.04Ma, based on several determinations on Moldavites from different sediments, including the Jankov deposit. This result indicates that the U and Th thin film neutron dosimetry represents a reliable alternative for an absolute approach in fission-track dating

Fission track dating method: I. Study of neutron flux uniformity in some irradiation positions of IEA-R1 reactor

International Nuclear Information System (INIS)

Osorio, A.M.; Hadler, J.C.; Iunes, P.J.; Paulo, S.R. de

1993-06-01

In order to use the fission track dating method the flux gradient was verified within the sample holder, in some irradiation positions of the IEA-R1 reactor at IPEN/CNEN, Sao Paulo. The fission track dating method considers only the thermal neutron fission tracks, to subtract the other contributions sample irradiations with a cadmium cover was performed. The neutron flux cadmium influence was studied. (author)

Chemical etching of fission tracks in ethylene-tetrafluoroethylene copolymer

International Nuclear Information System (INIS)

Komaki, Y.; Tsujimura, S.; Seguchi, T.

1979-01-01

The chemical etching of fission tracks in ethylene-tetrafluoroethylene copolymer was studied. Etched holes 3000 to 4000 A in diameter were recognized by electron microscopy for a film bombarded by fission fragments in oxygen and etched in a 12N sodium hydroxide solution at 125 0 C. The radial etching rate at 125 0 C was 6 to 8 A/hr, which is less than 17 A/hr for polyvinylidene fluoride in the same sodium hydroxide concentration at 85 0 C. The smaller rate is a reflection of the larger chemical resistivity of ethylene-tetrafluoroethylene copolymer than polyvinylidene fluoride. (author)

Radiation damage studies of mineral apatite, using fission tracks and thermoluminescence techniques

International Nuclear Information System (INIS)

Al-Khalifa, I.J.M.

1988-01-01

In a uranium (/thorium)-rich mineral sample which has not suffered a recent geological high-temperature excursion, the fossil fission track density (FFTD) will give a good indication of its natural radiation damage, provided that its U/Th ratio is known. From our studies of FFTD and thermoluminescence (TL) properties of several samples of apatite from different locations, and containing varying degrees of natural-radiation damage, an anti-correlation is observed between FFTD and TL sensitivity. It is also found that an anti-correlation exists between TL sensitivity and the amount of damage produced artificially by bombarding apatite crystals with different fluences of ∼30 MeV α-particles from a cyclotron. These results indicate that the presence of radiation damage in this mineral (viz., fluorapatite) can severely affect its TL sensitivity (i.e. TL output per unit test dose). The effect of crystal composition on the thermoluminescence and fission track annealing properties of mineral apatite is also reported. We have found that fission track annealing sensitivity and TL sensitivity are both significantly lower in samples of chlorapatite than in samples consisting predominantly of fluorapatite. (author)

Determination of the uranium concentration in soil solutions by the fission track registration technique

International Nuclear Information System (INIS)

Fernandes, G.P.

1980-02-01

The fission tracks registration technique was used to determine the uranium concentration in soil solutions. The Makrofol KG, a synthetic plastic manufactured by Bayer, was used as a detector and the wet method was applied. From the calibration curves obtained, it was possible to determine uranium concentrations in soil solutions, from 90 to 320 μg U/l, with an error between 9.4% and 4.0%, respectively. The method was applied to a few soil samples from Pocos de Caldas, Minas Gerais in Brazil. The uranium concentrations in the sample and residues were also determined by other methods to compare the results obtained; only one sample showed deviation from the results obtained by the fission tracks method. And this discrepancy was explained in a reasonable way. It was shown that the fission tracks technique can be used with sucess for application in soil solutions. (Author) [pt

Fission-track ages of Neogene and Quaternary volcanic ashes in south of Osaka, Japan

International Nuclear Information System (INIS)

Yokoyama, Takuo; Nakagawa, Yonosuke; Danhara, Tohru.

1984-01-01

A calculation method is proposed for the fission-track ages of zircon crystals in volcanic material. In this method, it is checked whether the spontaneous fission-track number of respective zircon crystals follows the Poisson distribution. If it does, the age is calculated by population method with all crystals, and if not, only with those crystals following the Poisson distribution, eliminating abnormal crystals. Extraneous zircon crystals are thus excluded and crystals with spontaneous fission-track number zero are not ignored. The following ages were obtained: Tamateyama volcanic ash in the Nijo group, 14.0 +- 0.6 Ma; pink volcanic ash in the Osaka group, 1.0 +- 0.2 Ma; Matsuo volcanic ash in the Ko-Osaka group, 1.5 +- 0.4 Ma; pumice volcanic ash in the Ko-Osaka group, 2.3 +- 0.4 Ma; Asashiro volcanic ash in the Ko-Osaka group, 2.9 +- 0.6 Ma. (Mori, K.)

Apatite fission track evidence on the uplifting of eastern Kunlun mountains

International Nuclear Information System (INIS)

Yuang Wanming; Dong Jinquan; Tang Yunhui; Wang Shicheng

2004-01-01

A series of samples were collected from about south-north section through Buqingshan and Dulan, eastern Kunlun mountains, China. The 41 apatite fission track ages (FTA) of these samples lie between 25.2 and 130.4 Ma, all of the apatite fission track ages are significantly younger than the host rocks. There are similar evolution trends for Middle-Kunlun zone and North-Kunlun zone, i.e. the FTA becomes less with slow increase of elevations and their uplifting rates are about 2.22 m/Ma. Differently, the FTA in South-Kunlun zone positively correlates to elevation, decreasing 11 m/Ma. It may be shown that South-Kunlun fault play a different and/or more important role on incontinent evolution than Middle-Kunlun fault. (author)

Fission-track evidence of tectonic evolution in the northwestern ...

Indian Academy of Sciences (India)

Guo-Qiang Sun

2018-02-14

Feb 14, 2018 ... from further collision of the Indian and Eurasian plates along the Yarlung Tsangpo suture zone. Strata ... Kunlun orogenic belt system using fission-track analysis of ... which had a decisive role in the development and ... boundary of the basin (Yue et al. ... Tagh fault commenced strike-slip movement (Yue.

Age and significance of core complex formation in a very curved orogen: Evidence from fission track studies in the South Carpathians (Romania)

Science.gov (United States)

Fügenschuh, B.; Schmid, S. M.

2005-07-01

Twenty-four new zircon and apatite fission track ages from the Getic and Danubian nappes in the South Carpathians are discussed in the light of a compilation of published fission track data. A total of 101 fission track ages indicates that the Getic nappes are generally characterized by Cretaceous zircon and apatite fission track ages, indicating cooling to near-surface temperatures of these units immediately following Late Cretaceous orogeny. The age distribution of the Danubian nappes, presently outcropping in the Danubian window below the Getic nappes, depends on the position with respect to the Cerna-Jiu fault. Eocene and Oligocene zircon and apatite central ages from the part of the Danubian core complex situated southeast of this fault monitor mid-Tertiary tectonic exhumation in the footwall of the Getic detachment, while zircon fission track data from northwest of this fault indicate that slow cooling started during the Latest Cretaceous. The change from extension (Getic detachment) to strike-slip dominated tectonics along the curved Cerna-Jiu fault allowed for further exhumation on the concave side of this strike-slip fault, while exhumation ceased on the convex side. The available fission track data consistently indicate that the change to fast cooling associated with tectonic denudation by core complex formation did not occur before Late Eocene times, i.e. long after the cessation of Late Cretaceous thrusting. Core complex formation in the Danubian window is related to a larger-scale scenario that is characterized by the NNW-directed translation, followed by a 90° clockwise rotation of the Tisza-Dacia "block" due to roll-back of the Carpathian embayment. This led to a complex pattern of strain partitioning within the Tisza-Dacia "block" adjacent to the western tip of the rigid Moesian platform. Our results suggest that the invasion of these southernmost parts of Tisza-Dacia started before the Late Eocene, i.e. significantly before the onset of Miocene

Options for Affordable Fission Surface Power Systems

International Nuclear Information System (INIS)

Houts, Mike; Gaddis, Steve; Porter, Ron; Van Dyke, Melissa; Martin, Jim; Godfroy, Tom; Bragg-Sitton, Shannon; Garber, Anne; Pearson, Boise

2006-01-01

Fission surface power systems could provide abundant power anywhere on the surface of the moon or Mars. Locations could include permanently shaded regions on the moon and high latitudes on Mars. To be fully utilized, however, fission surface power systems must be safe, have adequate performance, and be affordable. This paper discusses options for the design and development of such systems. (authors)

Application of fission track and other new technics in the study of geothermal history for Liaohe Basin

International Nuclear Information System (INIS)

Xia Yuliang; Zhu Jiechen; Zheng Maogong; Zhao Yunlong; Hu Zhenduo; Guo Xiuying; Gao Shangkui

1994-11-01

Mainly based on the study of fission track of the apatites, as well as geochronology, stable isotope composition and inclusion analysis, the principle and method of studying the geothermal history of sedimentary basin have been expounded systematically, and the source of sediment materials, and the geothermal characteristics of five section areas in Liaohe Basin were determined. The results of apatites and zircons U-Pb dating indicate that the materials of Shahejie Group in Liaohe Basin derived from the Shanhaiguan old land, and the record time of fission track of the apatites started at 172 Ma ago. On the basis of the studies of fission track characters of 100 apatite samples, stable isotopes and inclusion analysis, the annealing zone of fission track, oil generation zone and the old geothermal gradient were determined respectively in the western slope, southern part of western depression, Niuju area, Huangjindai area of eastern depression and Shallow sea area. It has provided the important scientific basis of reevaluating oil resources in Liaohe Basin. (2 tabs.)

Solid State Track Recorder fission rate measurements at high neutron fluence and high temperature

International Nuclear Information System (INIS)

Ruddy, F.H.; Roberts, J.H.; Gold, R.

1985-01-01

Solid State Track Recorder (SSTR) techniques have been used to measure 239-Pu, 235-U, and 237-Np fission rates for total neutron fluences approaching 5 x 10 17 n/cm 2 at temperatures in the range 680 to 830 0 F. Natural quartz crystal SSTRs were used to withstand the high temperature environment and ultra low-mass fissionable deposits of the three isotopes were required to yield scannable track densities at the high neutron fluences. The results of these high temperature, high neutron fluence measurements are reported

Dating method by fission tracks: some Brazilian examples

International Nuclear Information System (INIS)

Fonseca, Ariadne do Carmo

1996-01-01

The Fission Track method (TF) complements the dating of a interval of tectonic events occurred in low temperatures not detected by another radiometric methods. In the South part of Craton of Sao Francisco the dating of apatites of archaean rocks produced ages TF between 900 and 500 Ma, reflecting the progressive acting of the Brazilian margin mobile belts in the archaean craton areas. Apatite of some igneous and metamorphic rocks of the Braziliana age, in the Faixa Ribeira segment, between the Rio de Janeiro and Salvador cities, produced TF ages between 140 and 80 Ma. The basaltic and alkaline volcanism related to the Atlantic Ocean opening dated from this interval. The TF dating in apatites of the continental margin rocks allowed to date the event. In the Cabo Frio region (Southeastern part of Rio de Janeiro State), titanite and apatite of the Transamazonic orthognaisses produced TF dates between 190 and 80 to 40 Ma. The age around 190 Ma date previously the rift formation precursor of the South Atlantic Ocean opening, while the ages between 80 and 40 Ma were related to the alkaline rocks intrusion. The examples mentioned demonstrate the event diversity which may be dated by the Fission Tracks method, mainly in the craton area and margin belts study

Obsidian ages from Ecuador by the fission track dating

International Nuclear Information System (INIS)

Osorio, A.M.; Hadler, J.C.; Bigazzi, G.; Norelli, P.; Coltelli, M.; Salazar, E.

1991-01-01

Fission track dating was applied in order to study obsidian samples originated from Mullumica and Callejones flows, Oyacachi, Ecuador. Preliminary data show that the ratio between the mean diameter os spontaneous and induced tracks is about 0.9, an indication that the analysed samples were submitted to small fading during their geological histories. Ages were obtained around 0.2 x 10 6 a, in agreement with Miller and Wagners's results. Ages ranging from 0.17 x 10 6 a up to 0.23 x 10 6 a were obtained correcting the apparent ages by means of the plateau method. (author)

Studies of isothermal annealing of fission fragment and alpha particle tracks in Cr-39 polymer detectors

International Nuclear Information System (INIS)

Zaky, M.F.; Youssef, A.A.

2002-01-01

Two groups of CR-39 detectors samples are exposed to two types of charged particle radiation. The first group are severe damaged with fission fragment tracks from 2 52C f source. The second accepted alpha particles resulting from the interaction of highly energetic 1 9F -ions and a copper disk with thickness 1 cm, which are of less damage tracks than fission fragments. , The isothermal annealing of tracks in the temperature range from 175 to 300 degree C in step 25 degree C for annealing time of 10,15,20,25 and 30 minutes has been investigated. The changes introduced in the track density and track diameter for two types of irradiation in the detector have been observed and compared between them. The results indicate that the track density and the size of the tracks are considerably changed due to annealing

High temperature annealing of fission tracks in fluorapatite, Santa Fe Springs oil field, Los Angeles Basin, California

Science.gov (United States)

Naeser, Nancy D.; Crowley, Kevin D.; McCulloh, Thane H.; Reaves, Chris M.; ,

1990-01-01

Annealing of fission tracks is a kinetic process dependent primarily on temperature and to a laser extent on time. Several kinetic models of apatite annealing have been proposed. The predictive capabilities of these models for long-term geologic annealing have been limited to qualitative or semiquantitative at best, because of uncertainties associated with (1) the extrapolation of laboratory observations to geologic conditions, (2) the thermal histories of field samples, and (3) to some extent, the effect of apatite composition on reported annealing temperatures. Thermal history in the Santa Fe Springs oil field, Los Angeles Basin, California, is constrained by an exceptionally well known burial history and present-day temperature gradient. Sediment burial histories are continuous and tightly constrained from about 9 Ma to present, with an important tie at 3.4 Ma. No surface erosion and virtually no uplift were recorded during or since deposition of these sediments, so the burial history is simple and uniquely defined. Temperature gradient (???40??C km-1) is well established from oil-field operations. Fission-track data from the Santa Fe Springs area should thus provide one critical field test of kinetic annealing models for apatite. Fission-track analysis has been performed on apatites from sandstones of Pliocene to Miocene age from a deep drill hole at Santa Fe Springs. Apatite composition, determined by electron microprobe, is fluorapatite [average composition (F1.78Cl0.01OH0.21)] with very low chlorine content [less than Durango apatite; sample means range from 0.0 to 0.04 Cl atoms, calculated on the basis of 26(O, F, Cl, OH)], suggesting that the apatite is not unusually resistant to annealing. Fission tracks are preserved in these apatites at exceptionally high present-day temperatures. Track loss is not complete until temperatures reach the extreme of 167-178??C (at 3795-4090 m depth). The temperature-time annealing relationships indicated by the new data

SPATIAL UNCERTAINTY IN LINE-SURFACE INTERSECTIONS WITH APPLICATIONS TO PHOTOGRAMMETRY

Directory of Open Access Journals (Sweden)

J. Marshall

2012-07-01

Full Text Available The fields of photogrammetry and computer vision routinely use line-surface intersections to determine the point where a line intersects with a surface. The object coordinates of the intersection point can be found using standard geometric and numeric algorithms, however expressing the spatial uncertainty at the intersection point may be challenging, especially when the surface morphology is complex. This paper describes an empirical method to characterize the unknown spatial uncertainty at the intersection point by propagating random errors in the stochastic model using repeated random sampling methods. These methods accommodate complex surface morphology and nonlinearities in the functional model, however the penalty is the resulting probability density function associated with the intersection point may be non-Gaussian in nature. A formal hypothesis test is presented to show that straightforward statistical inference tools are available whether the data is Gaussian or not. The hypothesis test determines whether the computed intersection point is consistent with an externally-derived known truth point. A numerical example demonstrates the approach in a photogrammetric setting with a single frame image and a gridded terrain elevation model. The results show that uncertainties produced by the proposed empirical method are intuitive and can be assessed with conventional methods found in textbook hypothesis testing.

Thermal history of rocks in southern San Joaquin Valley, California: evidence from fission-track analysis

Science.gov (United States)

Naeser, N.D.; Naeser, C.W.; McCulloh, T.H.

1990-01-01

Fission-track analysis has been used to study the thermal and depositional history of the subsurface Tertiary sedimentary rocks on both sides of the active White Wolf reverse fault in the southern San Joaquin Valley. The distinctly different thermal histories of the rocks in the two structural blocks are clearly reflected in the apatite fission-track data, which suggest that rocks in the rapidly subsiding basin northwest of the fault have been near their present temperature for only about 1 m.y. compared with about 10 m.y. for rocks southeast of the fault. These estimates of heating time agree with previous estimates for these rocks. Zircon fission-track data indicate that the Tertiary sediments were derived from parent rocks of more than one age. However, from at least the Eocene to late Miocene or Pliocene, the major sediment source was rocks related to the youngest Sierra Nevada Mesozoic intrusive complexes, which are presently exposed east and south of the southern San Joaquin Valley. -from Authors

Chrono-thermométrie par traces de fission : une perspective nouvelle pour la prospection pétrolière Chronothermometry by Fission-Track Dating: New Means for Petroleum Prospection

Directory of Open Access Journals (Sweden)

Storzer D.

2006-11-01

Full Text Available La propriété caractéristique des traces de fission d'enregistrer les paléotempératures offre la possibilité unique de caler des événements thermiques dans leur contexte géologique et donc de modéliser quantitativement les histoires thermiques des roches. Le thermomètre traces de fission-apatite enregistre les paléo-températures dans un intervalle compris entre 30 et 170°C, domaine qui inclut les températures généralement retenues pour la genèse optimale des hydrocarbures liquides. La formation, la maturation et la destruction des hydrocarbures, de la même façon que la guérison des traces latentes, sont fonction des deux paramètres temps et températures; en conséquence, l'étude détaillée de l'effacement progressif des traces latentes fossiles dans les apatites en fonction de leur profondeur dans un puits, conduit à des indications précises sur les variations de la température en fonction du temps à l'intérieur de la fenêtre à huile. Ces deux informations sont obtenues en combinant la datation traces de fission-isochrone et les analyses de longueurs des traces de fission. Le potentiel de la méthode des traces de fission dans son application à la reconstitution de l'histoire thermique des bassins sédimentaires est illustré à partir de l'analyse d'apatites détritiques provenant des bassins intérieur et côtier du Gabon d'une part et du bassin d'Otway en Australie du Sud d'autre part. The characteristic property of fission tracks to record paleotemperatures provides a unique possibility of setting thermal events in their geological context and hence of quantitatively modeling the thermal histories of rocks. The fission track apatite-thermometer records paleotemperatures in the interval between 30 and 170°C, a range that includes the temperatures generally considered to be required for the optimum formation of liquid hydrocarbons. The formation, maturation and destruction of hydrocarbons, as well as the

Thorium content of a mineral ore from Morro do Ferro by fission track technique

International Nuclear Information System (INIS)

Oliveira, C.A.N. de.

1980-10-01

The feasibility to determine thorium concentrations by fission track technique in samples of mineral ore has been demonstrated. The literature registers only the application of the fission track technique to mineral ore in the case where the fissionable element is uranium. The technique was applied to determine the thorium concentration of an ore sample from Morro do Ferro, taking advantage of the high thorium to uranium ratio in that mineral. The sample analysed presented a thorium concentration of 2467 +- 400 mg Th/Kg ore. The so called wet method was adopted by using the Bayer made Makrofol KG 10μm thick, as the detector foil, immersed in the thorium solution. The technique is also useful to determine thorium concentrations in environmental samples because of the following aspects: high sensitivity; fast chemical separation of interfering elements; low cost; and operational simplicity. (Author) [pt

Fission track dating of authigenic quartz in red weathering crusts of carbonate rocks in Guizhou province

International Nuclear Information System (INIS)

Liu Xiuming; Wang Shijie; Zhang Feng

2004-01-01

The Cenozoic evolution history of Guizhou Province, which is located on the southeastern flank of the Qinghai-Tibet Plateau, is unclear because of the lack of sedimentation records. The red weathering crusts widespread on the Yunnan-Guizhou Plateau may bear critical information about their evolution history. This work firstly determined the ages of four red weathering crusts in eastern, central and northern Guizhou. The material used in fission track dating is well-crystallized quartz occurring in many in-situ weathering crusts of carbonate rocks. The results showed that the fission track ages of quartz vary over a wide range from 1 Ma to 25 Ma in the four profiles, significantly younger than the ages of Triassic and Cambrian parent rocks. In combination with the regionally geological evolution history during the period from 25 Ma to 1 Ma, the ages of quartz can exclude the possibility that the origin of quartz has nothing to do with primary clastic minerals in parent rocks, authigenesis during diagenesis and hydrothermal precipitation or replacement by volcanic activities. It is deduced that the well-crystallized quartz was precipitated from Si-rich weathering fluids during weathering processes of carbonate rocks. The recorded ages of quartz from the four profiles are consistent with the episodes of planation surfaces on the Qinghai-Tibet Plateau, the stages of red soil in the tropics of South China, the tectonically stable periods in Guizhou, and the ages of weathering in other parts of the world during the Cenozoic era. That is to say, the ages of authigenic quartz dated by the fission track method are well feasible and credible. (authors)

On the fission track dating and annealing behaviour of accessory minerals of Eastern Ghats (Andhra Pradesh, India)

International Nuclear Information System (INIS)

Koul, S.L.

1978-01-01

Use of the etching of fission fragment damage tracks for an estimation of the uranium content of apatite and zircon crystals is described. The etching conditions have been studied for which visible tracks are developed. Fission track determined ages of 25 samples of apatite and zircon crystals from four widely separated regions of India; the Borra mines (Vishakapatanam), Kashipatnam (Vishakapatnam), the Khamam area (Andhra Pradesh) and the Kodrama mines (Bihar) have been determined. Mean ages for these regions are 456 +- 5, 389 +- 4, 486 +- 7 and 664 +- 7 million years respectively. It is concluded that the fission track ages of the minerals date the last metamorphic event of the Eastern Ghats, known as the Indian Ocean Cycle. Annealing studies confirm that radiation damaged fossil tracks can be erased in minerals under intense metamorphic episodes, thus resetting the geological clock. Extrapolation of the experimentally determined temperatures for annealing suggest that a temperature of 170 0 C in 10 6 years will erase all the tracks in the apatite mineral. The uranium concentration has been estimated to be approximately 10 -8 gm/gm in apatite and approximately 10 -6 gm/gm in zircon. (Auth.)

Determination in soils of soluble uranium fraction in acid medium by fission tracks registration techniques

International Nuclear Information System (INIS)

Fernandes, G.P.

1980-01-01

The fission tracks registration technique was used to determine the concentration of uranium in soil solutions. The Makrofol KG, a synthetic plastic manufactured by Bayer, was used as a detector and the wet method was applied. The method was applied to a few samples of soils from Pocos de Caldas, Minas Gerais in Brazil. The concentrations of uranium in the samples and residues were also determined by other methods to compare the results obtained; only one sample showed deviation among the results obtained by the fission tracks method. (author)

Fission track dating and estimation of uranium in some garnets of Rajasthan (India)

Energy Technology Data Exchange (ETDEWEB)

Singh, S; Virk, H S [Punjabi Univ., Patiala (India). Dept. of Physics

1978-09-01

The experimental procedure, involving the preparation, etching, thermal neutron irradiation and scanning of the garnet samples, is described. The calculated fission track ages and uranium concentration are tabulated.

Estimation of trace levels of plutonium in urine samples by fission track technique

International Nuclear Information System (INIS)

Sawant, P.D.; Prabhu, S.; Pendharkar, K.A.; Kalsi, P.C.

2009-01-01

Individual monitoring of radiation workers handling Pu in various nuclear installations requires the detection of trace levels of plutonium in bioassay samples. It is necessary to develop methods that can detect urinary excretion of Pu in fraction of mBq range. Therefore, a sensitive method such as fission track analysis has been developed for the measurement of trace levels of Pu in bioassay samples. In this technique, chemically separated plutonium from the sample and a Pu standard were electrodeposited on planchettes and covered with Lexan solid state nuclear track detector (SSNTD) and irradiated with thermal neutrons in APSARA reactor of Bhabha Atomic Research Centre, India. The fission track densities in the Lexan films of the sample and the standard were used to calculate the amount of Pu in the sample. The minimum amount of Pu that can be analyzed by this method using doubly distilled electronic grade (E. G.) reagents is about 12 μBq/L. (author)

Fission track dating of volcanic glass: experimental evidence for the validity of the Size-Correction Method

International Nuclear Information System (INIS)

Bernardes, C.; Hadler Neto, J.C.; Lattes, C.M.G.; Araya, A.M.O.; Bigazzi, G.; Cesar, M.F.

1986-01-01

Two techniques may be employed for correcting thermally lowered fission track ages on glass material: the so called 'size-correcting method' and 'Plateau method'. Several results from fission track dating on obsidian were analysed in order to compare the model rising size-correction method with experimental evidences. The results from this work can be summarized as follows: 1) The assumption that mean size of spontaneous and induced etched tracks are equal on samples unaffected by partial fading is supported by experimental results. If reactor effects such as an enhancing of the etching rate in the irradiated fraction due to the radiation damage and/or to the fact that induced fission releases a quantity of energy slightly greater than spontaneous one exist, their influence on size-correction method is very small. 2) The above two correction techniques produce concordant results. 3) Several samples from the same obsidian, affected by 'instantaneous' as well as 'continuous' natural fading to different degrees were analysed: the curve showing decreasing of spontaneous track mean-size vs. fraction of spontaneous tracks lost by fading is in close agreement with the correction curve constructed for the same obsidian by imparting artificial thermal treatements on induced tracks. By the above points one can conclude that the assumptions on which size-correction method is based are well supported, at least in first approximation. (Author) [pt

Fission track dating and thermal history of Habahe rock body in Altai

International Nuclear Information System (INIS)

Liu Shunsheng; Tan Kaixuan

2002-01-01

The fission track ages (FTA) of several apatite and zircon samples from Habahe rock body in Altai were determined. The FTA of apatites were 51.1-76.9 Ma, and FTA of zircons were 141-149 Ma. Modelling of the palaeo-temperature evolution [T(t)-path] of rock body relies on confined track length measurements and the annealing equations of Laslett et al. (1987). The thermal and uplift history of this region was discussed

Study on the technical feasibility of Fission-Track dating at two irradiation positions of the RA-6 research reactor

International Nuclear Information System (INIS)

Dorval, Eric

2005-01-01

The method of Fission-Track dating is based upon the detection of the damage caused by fission fragments from the Uranium contained in geological samples.In order to determine the age of a sample, both the amount of spontaneous fissions occurred and the Uranium concentration must be known.The latter requires the irradiation of the samples inside a reactor with a well-thermalized flux, so that fissions are induced over 235 U targets only. Therefore, the Uranium concentration may be determined.The main inconvenient presented by the irradiation sites at the RA-6 MTR-type reactor is that neutron flux is not completely thermal there, which means that fissions due to epithermal and fast neutrons will not be negligible.In the same way, tracks due to fissions of 238 U and 232 Th will be detected. In order to know the corrections that must be applied to those measurements performed in this reactor, it is necessary to characterize fast flux.Because of it, this laboratory's gamma spectrometry equipment had to be calibrated. After that, several activation detectors were irradiated and results were analyzed. Finally, it was determined that it is feasible to Fission-Track date at the I6 position. However, limitations associated to this method were analyzed for the values of flux measured in the different sites

Estimation of U content in coffee samples by fission-track counting

International Nuclear Information System (INIS)

Sharma, P.K.; Lal, N.; Nagpaul, K.K.

1985-01-01

Because coffee is consumed in large quantities by humans, the authors undertook the study of the uranium content of coffee as a continuation of earlier work to estimate the U content of foodstuffs. Since literature on this subject is scarce, they decided to use the well-established fission-track-counting technique to determine the U content of coffee

The effects of radiation damage accumulation and annealing on fission-track dating of titanite

International Nuclear Information System (INIS)

Enkelmann, Eva; Jonckheere, Raymond; Ratschbacher, Lothar

2005-01-01

Fission-track dating of titanite is hindered by the fact that track etching is anisotropic in fresh titanites and becomes isotropic with increasing radiation damage. Independent age determinations with the population method are problematic due to different track counting efficiencies (Q) for ρ s in unannealed and ρ i in annealed titanite. Independent age determinations with the external detector method depend on correction factors for the track registration geometries (G = 0.5), counting efficiencies (Q) and range deficit (R = 1.38); however, Q is unaffected by annealing. It was attempted to determine GQR through calculation, direct experiment and on the basis of age standards. The direct experiment involves measurements of the ratio of the induced-track densities in titanite and a co-irradiated external detector. The track densities in the internal titanite surfaces could not be measured but the results for the external surfaces confirm that this approach leads to a significant overestimation of GQR, due to prior annealing. The GQR-values determined on the basis of age standards are consistent with that obtained by calculation assuming that Q ∼ 1, although there is no experimental confirmation for this fact apart from their isotropic etching characteristics. The fact that identical GQR-factors were obtained on standards of different age and uranium content suggests that a single GQR-value is appropriate for dating titanites within a broad range of radiation damage. In terms of the ζ-calibration this implies that a single ζ-factor is also suitable for dating different titanites. These findings suggest that other factors besides the accumulation of alpha-recoil damage, such as a phase transition, could be co-responsible for the different etching characteristics of annealed and unannealed titanites

Detection of fission fragments using thick samples in contact with solid state nuclear track detectors

International Nuclear Information System (INIS)

Lima, D.A. de; Martins, J.B.; Tavares, O.A.P.

1987-01-01

Whenever use is made of thick samples in contact with solid state nuclear track detectors for determining fission yields, one of the fundamental problems is the evaluation of the effective number of target nuclei which contributes to the fraction of the number of fission events that will be recorded. The evaluation of the effective number of target nuclei which contributes to recorded events is based on the effective thickness of the sample. A method for evaluating effective thickness of thick samples for binary fission modes, is presented. A cross section equation which takes into account all the necessary corrections due to fragment attenuation effects by a thick target for calculation induced fission yields, was obtained. (Author) [pt

Reference reactor module for NASA's lunar surface fission power system

International Nuclear Information System (INIS)

Poston, David I.; Kapernick, Richard J.; Dixon, David D.; Werner, James; Qualls, Louis; Radel, Ross

2009-01-01

Surface fission power systems on the Moon and Mars may provide the first US application of fission reactor technology in space since 1965. The Affordable Fission Surface Power System (AFSPS) study was completed by NASA/DOE to determine the cost of a modest performance, low-technical risk surface power system. The AFSPS concept is now being further developed within the Fission Surface Power (FSP) Project, which is a near-term technology program to demonstrate system-level TRL-6 by 2013. This paper describes the reference FSP reactor module concept, which is designed to provide a net power of 40 kWe for 8 years on the lunar surface; note, the system has been designed with technologies that are fully compatible with a Martian surface application. The reactor concept uses stainless-steel based. UO 2 -fueled, pumped-NaK fission reactor coupled to free-piston Stirling converters. The reactor shielding approach utilizes both in-situ and launched shielding to keep the dose to astronauts much lower than the natural background radiation on the lunar surface. The ultimate goal of this work is to provide a 'workhorse' power system that NASA can utilize in near-term and future Lunar and Martian mission architectures, with the eventual capability to evolve to very high power, low mass systems, for either surface, deep space, and/or orbital missions.

LENMODEL: A forward model for calculating length distributions and fission-track ages in apatite

Science.gov (United States)

Crowley, Kevin D.

1993-05-01

The program LENMODEL is a forward model for annealing of fission tracks in apatite. It provides estimates of the track-length distribution, fission-track age, and areal track density for any user-supplied thermal history. The program approximates the thermal history, in which temperature is represented as a continuous function of time, by a series of isothermal steps of various durations. Equations describing the production of tracks as a function of time and annealing of tracks as a function of time and temperature are solved for each step. The step calculations are summed to obtain estimates for the entire thermal history. Computational efficiency is maximized by performing the step calculations backwards in model time. The program incorporates an intuitive and easy-to-use graphical interface. Thermal history is input to the program using a mouse. Model options are specified by selecting context-sensitive commands from a bar menu. The program allows for considerable selection of equations and parameters used in the calculations. The program was written for PC-compatible computers running DOS TM 3.0 and above (and Windows TM 3.0 or above) with VGA or SVGA graphics and a Microsoft TM-compatible mouse. Single copies of a runtime version of the program are available from the author by written request as explained in the last section of this paper.

Dating by fission tracks in archaeology. 2. Characterization and dating of obsidian artefact

International Nuclear Information System (INIS)

Poupeau, G.; Zuleta, E.

1984-01-01

The ways of obsidian characterization presently used in archaeology are presented. The possibilities of the fission track method are more specially discussed, with two examples of works done in Japan and on any samples of andine America. (L.C.) [pt

Measurement of uranium in human teeth and kidney stones with the fission track technique

International Nuclear Information System (INIS)

Vartanian, R.

1986-01-01

The measurement of uranium in human teeth and in kidney stones was carried out using the fission track activation technique. In this determination 2759 and 2205 absolute counts of tracks for teeth samples and 1689 tracks for kidney stone samples were performed, respectively. The results are as follows: xsub(tooth) (1)=(0.227+-0.006) ppm, xsub(tooth) (2)=(0.143+-0.007) ppm and xsub(kidney)=(0.568+-0.020) ppm. The experimental method is described and the results are discussed. (author)

The potential of apatite fission track dating of vertical profiles in Namibia and the implications for passive margin evolution

International Nuclear Information System (INIS)

Raab, M.J.; Brown, R.W.; Cockburn, H.A.P.

1999-01-01

Full text: The on- and offshore geology of the Namibian passive continental margin has experienced kilometer scale erosion since South Atlantic opening in Lower Cretaceous times. A vertical apatite fission track profile of four samples in the Namibian highland has been analysed to constrain the low temperature thermal history of that area since the Pan-African Damara Orogeny at about 550 Ma. As a temperature sensitive thermochronological technique apatite fission track analysis is a powerful tool in constraining the low temperature history of rocks over a range of 60-110 deg C. These temperatures, depending on the geothermal gradient, equal a burial depth of 3-5 km so the method can reconstruct the cooling history of rocks as they approached the surface in response to erosion and tectonic processes. The four apparent apatite cooling ages are taken over a vertical distance of 300 m from the Windhoek Graben 40 km north of Windhoek. Forward modelling of the age and track length distribution has shown that these samples experienced high palaeotemperatures from ca. 90 to 95 deg C in the Late Cretaceous. This information was used to calculate the palaeogeothermal gradient at that time (20 deg C/km) which gives an estimate of the sedimentary cover of about 4.5 km which has been removed over a few million years in the Late Cretaceous. It was previously thought that the Namibian highland has been exposed at the surface more or less since the Permo-Carboniferous. In fact the samples provide evidence for a post Carboniferous reburial history of several kilometers followed by a short period of accelerated denudation in the Late Cretaceous at about 70 Ma. This might imply a far larger extent of the Etendeka flood basalts (132 Ma) and/or an underestimated sedimentary Karoo (Permian to Jurassic) thickness. The wider importance of these four data is that they detect the geomorphic impact of a global change of plate motion along the passive margin of Namibia which is known from a

Studies on the Th biodistribution in internal contamination by the fission track method using animals

International Nuclear Information System (INIS)

Ciubotariu, M.; Danis, A.; Dumitrescu, G.; Cucu, M.

1998-01-01

In our previous studies on the U internal contamination, qualitative and quantitative results were obtained by using the fission track methods. In order to obtain complete data on the fissionable element internal contamination using animals, we started a similar study using Th as contaminating element and Wistar London breed rats as laboratory animals. Different ways to obtain internal contaminations were investigated: ingestion, inhalation, absorption by skin and through wounds. In this stage, Wistar-London breed rats of the same sex, weight and age were internal contaminated by 1 ml Th solution ingestion for each rat corresponding to an Annual Limit Intake.The animals were kept in normal life conditions and under permanent medical surveillance up to their sacrifice. Also, their evacuations where sampled every 24 hours. They were sacrificed at different time intervals after their contamination: 2 days (RAT 1), 7 days (RAT 2) and 14 days (RAT 3). After sacrifice, their vital organs were sampled, weighed, calcined, reweighed and finally analysed by track detection using the fission track micromapping technique. This technique was used in the following conditions: - mica-muscovite as track detector pre-etched for fossil tracks 18 h in HF; - the neutron irradiations were performed in the nuclear reactor VVR-S Bucharest at the neutron fluences of 3x10 15 - 2x10 16 fast neutrons/cm 2 . In order to check whether there is any U contribution to the fission track densities obtained in track detectors, U existing in the rat body due to food and water, the neutron irradiations of the ensembles were performed with and without 1 mm Cd shielding; - the visualization of the Th induced fission tracks were obtained by chemical etching in HF, 3 h at room temperature; - the Th track micromappings obtained in track detectors were studied by optical microscopy using a stereomicroscope WILD M7S for ensemble study (X6-X31) and a binocular ZEISS JENA microscope for qualitative and

A fission track technique used for hydrogeochemical prospecting in Northern India

International Nuclear Information System (INIS)

Singh, N.P.; Singh, S.; Virk, H.S.

1988-01-01

A fission track technique is employed to determine the uranium content of water samples collected from different locations of the middle and outer Himalayas. The regional threshold for the uranium content is determined for water samples of different areas. The identification of anomalies in an area of uranium mineralization confirmed that the hydrogeochemical technique could successfully be used for uranium exploration. (author)

Absolute measurement of thermal neutron fluence and its application for fission track dating

International Nuclear Information System (INIS)

Ganzawa, Yoshihiro; Honda, Teruyuki; Nozaki, Tetsuya.

1988-01-01

The absolute measurements of thermal neutron fluence for fission track dating have been developed after the proceeding results of Honda et al. (1987). The 2,200 m/sec activation cross section of 197 Au (98.8 barn) is corrected to 87.4 barn (σa) by the three factors of the neutron temperature, Maxwellian distribution of thermal neutrons and non 1/v correction factor for the above absolute measurement. The calibrated factor (B th ) of standard glasses (SRM613, SRM962a, CN-1 and CN-2) and zeta-a (ζa) values for fission track dating are determined on the basis of these experimental results. The values of B th , (7.47 ± 0.29) x 10 9 for SRM613, (7.43 ± 0.34) x 10 9 for SRM962a, (2.50 ± 0.06) x 10 9 for CN-1 and (2.74 ± 0.06) x 10 9 for CN-2 closely agree with those reported previously by Honda et al. (1987). Further, the ζa values of 392.3 ± 16.5 for SRM962a and SRM613, 131.4 ± 3.1 for CN-1 and 144.1 ± 3.3 for CN-2 calculated from B th , effective thermal neutron fission cross-section σf (497.4 barn), isotopic abundance ratio 235 U/ 239 U, I (7.2527 x 10 -3 ) and spontaneous fission decay constant of 238 U, λ f (6.85 x 10 -17 a -7 ) show close agreement with ζ b values (392.5 ± 10.0, 131.6 ± 3.3, 140.1 ± 3.5) derived from the absolute age of Fish Canyon Tuff (27.9 ± 0.7 Ma) respectively. The fission track dating of zircons separated from Oligocene-Miocene tuff distributed in Eastern Hokkaido have been carried out by the external detector method using ζ a . The obtained ages are 28.6 ± 0.7 Ma (1 - 2) and 23.3 ± 0.7 Ma (3 - 2). These results agree well with the geologic age supported from Ashoro Fossil Fauna, K-Ar ages of volcanic rocks and stratigraphy in this area. (author)

Comparison through fission-track analysis of portions of Australia and Antarctica adjacent prior to continental drift

International Nuclear Information System (INIS)

Stump, E.; Fitzgerald, P.G.

1990-01-01

Australia and Antarctica have been reconstructed by the matching of three terranes in western Victoria with three terranes in northern Victoria Land. Apparent fission-track ages from granitic rocks of these matched regions are compared. In western Victoria, Australia, data reflect a history of slow cooling following intrusion in early to middle Paleozoic time. In northern Victoria Land, Antarctica, a complex history of cooling and uplift is indicated, with uplift of the present-day mountains commencing approximately 50 Ma. Fission tracks in apatites from most samples from northern Victoria Land were completely re-set to zero by the thermal effects of Jurassic tholeiitic magmatism. Apatite in three samples however, predate the Jurassic and were only partially re-set by this event. Apparent sphene fission-track ages indicate that the three terranes in northern Victoria Land have shared a common thermal history since the Devonian. With the exception of one small area in western Victoria, neither western Victoria nor northern Victoria Land data show a clear influence of rifting and breakup in the late Cretaceous. Overall, the data indicate that once the breakup of Australia and Antarctica had occurred, their thermal and tectonic histories evolved independently along differing paths. (author)

Fission track ages on apatite of Bergell rocks from central Alps and Bergell boulders in Oligocene sediments

International Nuclear Information System (INIS)

Wagner, G.A.; Miller, D.S.

1979-01-01

Previous radiometric dating studies indicated that the Bergell region, in contrast to other regions of the Central Alps, experienced an early, rapid uplift, but with decreasing rate. Furthermore, there is also a geological record of the early uplift history of the Bergell granite by the existence of boulders which were derived from this granite and which occur in the Late Oligocene sediments of the Po plain. In this work the uplift history of the Bergell is studied in more detail by fission track dating of additional apatites from the Bergell region. Secondly, by determining apatite fission track ages the granitic boulders of the Po plain can be re-assigned to their original vertical position within the Bergell intrusive before erosion removed them in Late Oligocene time. A rather conservative estimate replaces them 6 km above the present morphology of the Bergell massif. Thus, the thickness of the Bergell granite must have been at least 8 km. Generally, fission track studies on boulders may become an important tool to study the vertical extent of mountain chains during the geological past. (Auth.)

Obsidian dating by fission track method; Datacao de obsidianas com o metodo dos tracos de fissao

Energy Technology Data Exchange (ETDEWEB)

Araya, A M.O.

1990-12-01

The fission track method was employed to obtain the age of twelve obsidian sample from Ecuador. By using the plateau-age correction method, we obtained the true age of each sample and were able to identify four groups of ages in the studied area. Thereafter we studied the fading of fission tracks in two obsidian samples with different origins: Yanaurcu, Ecuador and Monte Arci, Italy. We constructed Arrhenius plots and calculated activation energies for both samples. The results from thermal annealing experiments were compared with theoretical curves obtained by integrating an equation proposed by Shukolyukov et al (1965). (author). 43 refs, 20 figs, 10 tabs.

New fission-track ages of mio-pliocene tuffs in the Sierras Pampeanas and Precordillera of Argentina

International Nuclear Information System (INIS)

Tabbutt, K.; Naeser, C.W.; Jordan, T.E.; Cerveny, P.F.

1989-01-01

Fission-track dates were determined for 18 volcanic tuff horizons located in nine Neogene foreland basin sequences distributed throughout the Precordillera and Sierras Pampeanas of Northwestern Argentina, an area of nearly horizontal subduction. These and other data indicate that a lower age limit for the sedimentary sequences studied is approximately 17 Ma. Therefore these fission-track dates constrain both the history of volcanic activity and the time of deposition in several foreland basins from the middle Miocene to Recent. Although the dates range from 3.6±0.8 Ma to 17.0±1.9 Ma, there is a marked increase in the number of ashes younger than 9 Ma. This implies that two distinct episodes of volcanic activity affected the region. The source of some of these tuffs is unknown but they are probably limited to the 'flat-slab' region between 27 deg and 32 deg S. Tuffs at Rio Blanco and Santa Florentina that are spatially associated with the Mogotes dacite domes of the Famatina Range represented magmatism bracketed from about 7 to 4 Ma in the region underlain by the flat-subducted plate. The stratigraphic relations in the basins show that the faulting that uplifted Sierra de Famatina was contemporaneous with the volcanism which reached the surface along the bounding faults. (Author) [es

Tectonic setting and uplift analysis of the Pangani rift basin in northern Tanzania using apatite fission track thermochronology

International Nuclear Information System (INIS)

Mbede, E.I.

2001-01-01

Thirty four new Apatite Fission Track (AFT) ages and 32 track length distributions from samples of basement rocks flanking the Pangani rift, East African Rift System (EARS) are presented, in an attempt to elucidate the uplift and erosion of the rift flanks. The ages fall in the range of 207±15 to 48±4 Ma, spanning from Early Jurassic to Early Tertiary. These ages are much younger than the last thermal event in the Mozambique belt that form the basement complex and are interpreted to represent the most recent tectonic events. Track length (TL) distributions suggest that uplift and erosion of the rift flanks are related to three different tectonic events, which are also recorded by the sedimentary units within the adjacent coastal basins. These included the Triassic/Early Jurassic, Late Cretaceous and Early Tertiary tectonic events. Erosion and isostatic rebound have modified the tectonically induced topographic patterns and the highly elevated plateaus flanking the Pangani rift represent an erosional surface referred to as the 'Gondwana surface' of eastern and central Africa. T he present AFT data suggest that initial exhumation of the 'Gondwana surface' from temperatures above 383.15 K to temperatures less than 333.15 K, in this area, took place during Early Jurassic times, but the final sub-aerial exposure of the surface did not take place until Early Tertiary. (author)

Apatite fission track and (U-Th)/He dating of teschenite intrusions gives time constraints on accretionary processes and development of planation surfaces in the Outer Western Carpathians

Energy Technology Data Exchange (ETDEWEB)

Danisik, Martin; Frisch, Wolfgang [Tuebingen Univ. (Germany). Inst. of Geosciences; Panek, Tomas [Ostrava Univ. (Czech Republic). Dept. of Physical Geography and Geoecology; Matysek, Dalibor [Technical Univ. of Ostrava (Czech Republic). Dept. of Geological Engineering; Dunkl, Istvan [Geoscience Center Goettingen (Germany). Sedimentology and Environmental Geology

2008-09-15

The age of planation surfaces in the Podbeskydska pahorkatina Upland in the Outer Western Carpathians (OWC, Czech Republic) is constrained by low-temperature thermochronological dating methods for the first time. Our apatite fission track and apatite (U-Th)/He data measured on teschenite intrusions show that planation surfaces in the study area formed in post-Pannonian time (>7.1 Ma) and are therefore younger than traditionally believed. This contradicts the classical concepts, which stipulate that a large regional planation surface of Pannonian age (the so-called ''midmountain level'') developed in the whole Western Carpathians. Geodynamic implications of our data are the following: (i) the investigated Tesin and Godula nappes of the OWC were buried and thermally overprinted in the accretionary wedge in different ways, and consequently experienced different cooling histories. This indicates a dynamic basin setting with an active accretionary process in a subduction zone; (ii) accretionary processes in the OWC were active already during Late Eocene times. (orig.)

Apatite fission-track dating of erosion in the eastern Andes, Bolivia

International Nuclear Information System (INIS)

Crough, S.T.

1983-01-01

Three samples from a Triassic-age batholith in the eastern Andes northeast of La Paz, Bolivia yield apatitic fission-track ages of 11-13 Ma. Interpreting these young ages as due to uplift and erosion requires approximately 2.5-5.0 km of erosion in the past 12 Ma, an amount which is consistent with the known geology and which is typical of many active mountain ranges. (orig.)

Liquid nitrogen enhancement of partially annealed fission tracks in glass

International Nuclear Information System (INIS)

Pilione, L.J.; Gold, D.P.

1976-01-01

It is known that the number density of fission tracks in solids is reduced if the sample is heated before chemical etching, and the effect of annealing must be allowed for before an age can be assigned to the sample. The extent of annealing can be determined by measuring the reduction of track parameters (diameter and/or length) and comparison with unannealed tracks. Correct ages can be obtained by careful calibration studies of track density reduction against track diameter or length reduction at different annealing temperatures and times. For crystallised minerals, however, the resulting correction techniques are not generally valid. In the experimental work described glass samples were partially annealed and then immersed in liquid N 2 for various periods, and it was shown that the properties of the glass and the track parameters could be altered so as to observe tracks that would normally be erased by annealing. The results of track density measurements against liquid N 2 immersion times are shown graphically. A gain of about 40% was achieved after 760 hours immersion time. The size of the tracks was not noticeably affected by the immersion. It was thought that thermal shock might be the cause of the track enhancement, but it was found that repeated immersion for about 2 hours did not lead to an increase in track density. Other studies suggest that the mechanism that erases the tracks through annealing may be partially reversed when the temperature of the sample is significantly lowered for a sufficient length of time. Further work is under way to find whether or not the process of enhancement is a reversal of the annealing process. Similar enhancement effects using liquid N 2 have been observed for d-particle tracks in polycarbonate detectors. (U.K.)

Convection methodology for fission track annealing: direct and inverse numerical simulations in the multi-exponential case

International Nuclear Information System (INIS)

Miellou, J.C.; Igli, H.; Grivet, M.; Rebetez, M.; Chambaudet, A.

1994-01-01

In minerals, the uranium fission tracks are sensitive to temperature and time. The consequence is that the etchable lengths are reduced. To simulate the phenomenon, at the last International Conference on Nuclear Tracks in solids at Beijing in 1992, we proposed a convection model for fission track annealing based on a reaction situation associated with only one activation energy. Moreover a simple inverse method based on the resolution of an ordinary differential equation was described, making it possible to retrace the thermal history in this mono-exponential situation. The aim of this paper is to consider a more involved class of models including multi-exponentials associated with several activation energies. We shall describe in this framework the modelling of the direct phenomenon and the resolution of the inverse problem. Results of numerical simulations and comparison with the mono-exponential case will be presented. 5 refs. (author)

Shaping the Australian crust over the last 300 million years: insights from fission track thermotectonic imaging and denudation studies of key terranes

International Nuclear Information System (INIS)

Kohn, B.P.; Gleadow, A.J.W.; Brown, R.W.; O'Sullivan, P.B.; Foster, D.A.; Gallagher, K.

2002-01-01

Apatite fission track thermochronology is a well-established tool for reconstructing the low-temperature thermal and tectonic evolution of continental crust. The variation of fission track ages and distribution of fission track lengths are primarily controlled by cooling, which may be initiated by earth movements and consequent denudation at the Earth's surface and/or by changes in the thermal regime. Using numerical forward-modelling procedures these parameters can be matched with time-temperature paths that enable thermal and tectonic processes to be mapped out in considerable detail. This study describes extensive Australian regional fission track datasets that have been modelled sequentially and inverted into time-temperature solutions for visualisation as a series of time-slice images depicting the cooling history of present-day surface rocks during their passage through the upper crust. The data have also been combined with other datasets, including digital elevation and heat flow, to image the denudation history and the evolution of palaeo-topography. These images provide an important new perspective on crustal processes and landscape evolution and show how important tectonic and denudation events over the last 300 million years can be visualised in time and space. The application of spatially integrated denudation-rate chronology is also demonstrated for some key Australian terranes including the Lachlan and southern New England Orogens of southeastern Australia, Tasmania, the Gawler Craton, the Mt lsa lnlier, southwestern Australian crystalline terranes (including the Yilgarn Craton) and the Kimberley Block. This approach provides a readily accessible framework for quantifying the otherwise undetectable, timing and magnitude of long-term crustal denudation in these terranes, for a part of the geological record previously largely unconstrained. Discrete episodes of enhanced denudation occurred principally in response to changes in drainage, base

Rapid Late Miocene Exhumation in the Central Alps, Constrained by (U-Th)/He and Fission Track Thermochronology

Science.gov (United States)

Aramowicz, A.; Cosca, M.; Stockli, D.; Farley, K.; Seward, D.

2007-12-01

Zircon and apatite (U-Th)/He thermochronological data together with apatite fission track analyses are used to explore uplift and exhumation of the western part of the Aar massif in the central Swiss Alps. A total of 27 samples were collected from the surface and underground, from the world's deepest tunnel (Loetschberg NEAT), with an overall elevation difference of almost 2500 m. Zircon (U-Th)/He ages range from 5.5 to 7.6 Ma, apatite fission track ages range from 5.7 to 6.5 Ma and apatite (U-Th)/He ages range from 3 to 5.5 Ma. All zircon age-elevation profiles from three traverses, show distinct brakes in slope that mark a drastic, 10-fold acceleration of exhumation at 6 ± 0.5 Ma ago (from 0.3 km/Ma to 3 km/Ma). The trend of fast exhumation appears to be maintained in the apatite fission track data while apatite (U-Th)/He ages suggest a return to moderate, apparent exhumation rates of 0.5 km/Ma. We propose that the accelerated exhumation may be linked to the Messinian desiccation of the Mediterranean. During that event, Mediterranean sea level dropped locally by as much as 3 km which accelerated erosion in the Alps. Consequently, the erosion in the Alps must have increased. If wedge mechanics are considered, the increased erosional flux reduced the active width of the orogen and, during latest convergence, deformation focused in the internal parts of the Alps, i.e. Aar massif. This interpretation implies a strong and prompt feedback between external forcing and tectonic response of the orogen. The slower exhumation rate apparent from the apatite (U-Th)/He data may reflect a decline in deformation. Alternatively, due to its low closure temperature, this system is prone to resetting by heat advected through hydrothermal circulation. This scenario needs further investigation but abundant hot-water (ca. 50 °C) discharge in the sampled tunnel is not uncommon.

Superheavy-element fission tracks in iron meteorites, and reply by Bull, R.K

International Nuclear Information System (INIS)

Runcorn, S.K.

1980-01-01

Comment is made on the lack of superheavy element (SHE) fission tracks observed in silicates from the class IA Odessa iron meteorite by Bull (Nature; 282:393 (1979)). Two explanations are suggested. Firstly, a thermal history for Odessa can be constructed in which the meteorite reaches track retention temperatures only after a time corresponding to many half lives for the SHEs (taken to be approximately 100 Myr) has elapsed and secondly that the IA irons never took up many SHEs. These suggestions are discussed in a reply by Bull. (U.K.)

Thorium-uranium fission radiography

Science.gov (United States)

Haines, E. L.; Weiss, J. R.; Burnett, D. S.; Woolum, D. S.

1976-01-01

Results are described for studies designed to develop routine methods for in-situ measurement of the abundance of Th and U on a microscale in heterogeneous samples, especially rocks, using the secondary high-energy neutron flux developed when the 650 MeV proton beam of an accelerator is stopped in a 42 x 42 cm diam Cu cylinder. Irradiations were performed at three different locations in a rabbit tube in the beam stop area, and thick metal foils of Bi, Th, and natural U as well as polished silicate glasses of known U and Th contents were used as targets and were placed in contact with mica which served as a fission track detector. In many cases both bare and Cd-covered detectors were exposed. The exposed mica samples were etched in 48% HF and the fission tracks counted by conventional transmitted light microscopy. Relative fission cross sections are examined, along with absolute Th track production rates, interaction tracks, and a comparison of measured and calculated fission rates. The practicality of fast neutron radiography revealed by experiments to data is discussed primarily for Th/U measurements, and mixtures of other fissionable nuclei are briefly considered.

International Union of Geological Sciences Subcommission on Geochronology recommendation for the standardization of fission track dating calibration and data reporting

International Nuclear Information System (INIS)

Hurford, A.J.

1990-01-01

Because of the difficulties of calibration in fission track (FT) dating over the last 20 yr, including uncertainty of the absolute λ f value, complexities of neutron dosimetry, complexities of neutron irradiation, correction factors necessary in some methodological procedures, and personal factors in track counting, the Working Group elected at the Cambridge ICOG meeting in 1986 recommended to FT workers meeting at the 6th International Fission Track Dating Workshop in Besancon on 9 September 1988, a uniform approach to system calibration, sample irradiation, calculation of FT age, and presentation of data. After discussion and modification, the recommendation was accepted. This modified recommendation is presented. (author)

The Comparison Study of Neutron Activation Analysis and Fission Track Technique for Uranium Determination

International Nuclear Information System (INIS)

Sirinuntavid, Alice; Rodthongkom, Chouvana

2007-08-01

Full text: Comparison between Neutron Activation Analysis (NAA) and fission track technique for uranium determination in solid samples was studied by use of standard reference materials, i.e., ore, coal fly ash, soil. For NAA, the epithermal neutron was applied for activated irradiation. Then, the 74.5 keV gamma from U-239 or 277.7 keV gamma from Np-239 was measured. For high Uranium content samples, NAA method with 74.5 keV gamma measurement, gave higher precision result than the 277.7 keV gamma measurement method. NAA method with 277.7 keV gamma measurement, gave higher sensitivity and precision result for low Uranium content samples and the uranium contained less than 10 ppm samples. Nevertheless, the latter procedure needed longer time for neutron irradiation and analysis procedure. In comparison the results of Uranium analysis between NAA and fission track, it was found that no significant difference within 95 % of confidence level

Understanding the uplift pattern in Mesozoic and Cenozoic,, eastern Dabie area, China using fission track dating of apatite

International Nuclear Information System (INIS)

Wu Qianhong; Liu Shunsheng

2002-01-01

By using the fission track dating technique, a preliminary study was carried out on the fission track ages (FTA) of apatite, their distribution patterns and hints over the tectonics activities during Mesozoic and Cenozoic in the east Dabie area. Attempts were also made to improve the conventional statistical method for the tracks. Ranging from 59.4 +- 3.4 Ma to 105.6 +- 9.8 Ma, the FTA results of apatite spread in the wide range and increased rapidly from the east to the west area. Sine 95 Ma, the uplift rate has been quite slow and asymmetry. The FTA value in the middle area of Xiaotian-Mozitan Fault may imply its uplift in Cretaceous. The faulting should be the main control factor for the uplift of this area

Development of nuclear microfilters using the fission tracks registration technique

International Nuclear Information System (INIS)

Yamasaki, I.M.; Geraldo, L.P.

1990-10-01

Nuclear microfilters with mean pores diameter in the range from 1.9 to 10.6 μm have been produced using the fission tracks registration technique in Makrofol KG (8 μm thickness). Fluctuations around 11% and 10% were obtained respectively for the pores size and pores uniformity in the analysis of a typical sample of microfilter. The essential features of the microfilters were similar to those ones, commercially known as Nuclepore and thus they may be routinely employed in the several applications areas of the Industry and Biology. (author)

Fission track dating and uranium estimation in pegmatitic minerals of Rajasthan state (India)

Energy Technology Data Exchange (ETDEWEB)

Singh, S; Virk, H S [Punjabi Univ., Patiala (India). Dept. of Physics

1978-12-01

Fission track geochronology of muscovite samples collected from some pegmatitic mines of Bhilwara and Ajmer districts of Rajasthan state (India) has been discussed. The ages obtained suggest the occurrence of Delhi Orogenic Cycle as the last major metamorphic activity in the region. The atomic fraction of uranium in muscovite samples is less than 1 p.p.b.

Apatite fission track analysis: geological thermal history analysis based on a three-dimensional random process of linear radiation damage

International Nuclear Information System (INIS)

Galbraith, R.F.; Laslett, G.M.; Green, P.F.; Duddy, I.R.

1990-01-01

Spontaneous fission of uranium atoms over geological time creates a random process of linearly shaped features (fission tracks) inside an apatite crystal. The theoretical distributions associated with this process are governed by the elapsed time and temperature history, but other factors are also reflected in empirical measurements as consequences of sampling by plane section and chemical etching. These include geometrical biases leading to over-representation of long tracks, the shape and orientation of host features when sampling totally confined tracks, and 'gaps' in heavily annealed tracks. We study the estimation of geological parameters in the presence of these factors using measurements on both confined tracks and projected semi-tracks. Of particular interest is a history of sedimentation, uplift and erosion giving rise to a two-component mixture of tracks in which the parameters reflect the current temperature, the maximum temperature and the timing of uplift. A full likelihood analysis based on all measured densities, lengths and orientations is feasible, but because some geometrical biases and measurement limitations are only partly understood it seems preferable to use conditional likelihoods given numbers and orientations of confined tracks. (author)

Intersections of adelic groups on a surface

International Nuclear Information System (INIS)

Budylin, R Ya; Gorchinskiy, S O

2013-01-01

We solve a technical problem related to adeles on an algebraic surface. Given a finite set of natural numbers, one can associate with it an adelic group. We show that this operation commutes with taking intersections if the surface is defined over an uncountable field, and we provide a counterexample otherwise. Bibliography: 12 titles

Reference reactor module for NASA's lunar surface fission power system

Energy Technology Data Exchange (ETDEWEB)

Poston, David I [Los Alamos National Laboratory; Kapernick, Richard J [Los Alamos National Laboratory; Dixon, David D [Los Alamos National Laboratory; Werner, James [INL; Qualls, Louis [ORNL; Radel, Ross [SNL

2009-01-01

Surface fission power systems on the Moon and Mars may provide the first US application of fission reactor technology in space since 1965. The Affordable Fission Surface Power System (AFSPS) study was completed by NASA/DOE to determine the cost of a modest performance, low-technical risk surface power system. The AFSPS concept is now being further developed within the Fission Surface Power (FSP) Project, which is a near-term technology program to demonstrate system-level TRL-6 by 2013. This paper describes the reference FSP reactor module concept, which is designed to provide a net power of 40 kWe for 8 years on the lunar surface; note, the system has been designed with technologies that are fully compatible with a Martian surface application. The reactor concept uses stainless-steel based. UO{sub 2}-fueled, pumped-NaK fission reactor coupled to free-piston Stirling converters. The reactor shielding approach utilizes both in-situ and launched shielding to keep the dose to astronauts much lower than the natural background radiation on the lunar surface. The ultimate goal of this work is to provide a 'workhorse' power system that NASA can utilize in near-term and future Lunar and Martian mission architectures, with the eventual capability to evolve to very high power, low mass systems, for either surface, deep space, and/or orbital missions.

The spark counting of etched fission-fragment tracks in polycarbonate for a personal neutron dosimetry system

International Nuclear Information System (INIS)

Harrison, K.G.; Hancock, I.B.; Holt, P.D.; Wylie, J.W.

1977-10-01

A new type of personal neutron dosimeter, in which neutron-induced fissions in a thin 237 Np foil are detected by a polycarbonate track-detector, is under development at Harwell for use in a nuclear-fuel reprocessing plant. As part of the development programme, an experimental dosimeter, etching facility and spark counter have been used to study the spark-counting method for counting fission-fragment tracks in polycarbonate. Emphasis has been placed on developing operating procedures for the counter consistent with good overall reproducibility. Existing methods for the optimizing and testing of spark counters is briefly reviewed and a practical operational testing procedure is devised. The optimized system is found to be relatively foolproof in operation and gives good results in unskilled use as well as under carefully-controlled laboratory conditions. (author)

Study of the temperature effect on the surface of stainless steel using fission track technique

Energy Technology Data Exchange (ETDEWEB)

Dhawan, M M; Nagpaul, K K [Kurukshetra Univ. (India). Dept. of Physics

1977-01-01

Solid state track technique has been used to determine trace amounts of uranium in steel. Steel samples of the size 1 cm x 1 cm x 0.6 cm were ground, polished, heated to various temperatures ranging from room temperature to 900 deg C and then packed alternately with lexan detectors in an aluminium capsule for thermal neutron irradiation. After irradiation, lexan discs were removed and etched. Their surfaces were scanned under an optical microscope for measurement of track density. Uranium contents of the samples was found to vary from 6 ppm to 9 ppm.

A method for the measurement of fission rates in fast neutron fields using solid state track detectors

International Nuclear Information System (INIS)

Hansen, W.; Vogel, W.

1984-04-01

Solid state track detectors (SSTDs) are increasingly used for the registration of radiation in different fields of nuclear physics. Because of their small sizes and masses and the absence of any electronics during exposure SSTDs do not cause distortions in the system to be investigated and are useful for measurements at such places being difficult of access. The elaboration of a method is described for fission rate measurements in fast neutron fields applying SSTDs and different fissionable isotopes which were electrodeposited on stainless steel backings. Experiences of the electrodeposition and results of quality checks are presented. The evaluation of the etched tracks is performed with spark counter technique. The dependence of the counting result on essential influence parameters is discussed. (author)

Thermal and exhumation history of Sakhalin Island (Russia) constrained by apatite U-Pb and fission track thermochronology

Science.gov (United States)

Glorie, Stijn; Alexandrov, Igor; Nixon, Angus; Jepson, Gilby; Gillespie, Jack; Jahn, Bor-Ming

2017-08-01

Sakhalin Island represents a key locality to study the tectonic evolution of the western Pacific. The island is located at the Amur-Okhotsk plate margin and records a complex thermotectonic history. Apatite double dating (U-Pb and fission track) and thermal history modelling were applied to three late Eocene granitoid massifs within central and southern Sakhalin: the Aniva, Okhotsk and Langeri complexes. Apatite U-Pb results yield consistent late Eocene (∼40-37 Ma) ages, suggesting rapid post-magmatic cooling. Apatite fission track results reveal bimodal age distributions with late Eocene - early Oligocene (∼38-33 Ma) and early Miocene (∼20-17 Ma) age populations that can be correlated with variations in Uranium and Chlorine concentrations. Thermal history modelling translates the AFT age bimodality into two-phase cooling histories. The timing of the early cooling phase (∼38-33 Ma) corresponds with the apatite U-Pb ages, indicating rapid cooling to at least ∼100 °C during the late Oligocene. The second cooling phase at ∼20-17 Ma cooled the samples to near-surface temperatures. Both cooling phases correspond with regional unconformities and subsequent accelerations in sedimentation rate, suggesting that cooling was a response to rapid exhumation. In addition, our data suggests that the studied terranes record differential exhumation with respect to the structural architecture. The Miocene exhumation pulse is coeval with the timing of transpressional fault displacement and the subsequent opening of the Kuril Basin.

Identification of the source of manufacture of obsidian through the dating with the method of fission track

International Nuclear Information System (INIS)

Arias, C.; Bigazzi, G.; Bonadonna, F.P.; Radi, G.; Bernardes, C.; Hadler Neto, J.C.; Lattes, C.M.G.; Araya, A.M.O.; Oliveira, J.X.

1986-01-01

Identification of the source of manufacture of obsidian through the dating with the method of fission track. After a brief description of fission track dating method and of the problems related to its application to volcanic glasses, we show and discuss data about obsidians of geological origin from Mediterranean basin and Latin America and of archaeological origin found in prehistoric sites from Italian peninsula. The analysis of the results shows the excellent performance of fission track method to identify the provenance of obsidians of archaeological origin, provided important constributions both from the methodological pointo of view-excellent agreement between the two correction techniques of apparent ages, size-correction technique and plateau age -, as from the archaeological point of view - we could identify four possible sources of provenance in Italy, the obsidian from Monte Arci, Sardinia, the obsidian from Pahnarola island, the obsidian from Gabelloto, Lipari island and the obsidian from Balata dei Turchi, Pantelleria island; and it ca be shown that Lipari obsidian began to be used at a very antique phase of neolithic period. The data about Latin American samples, though fragmented, constitute in an inicial study promissing perpectives as it can be observed by the comparisions made with the data published by others authors about geologic and archaeologic samples from the same area. (Author) [pt

Lunar surface fission power supplies: Radiation issues

International Nuclear Information System (INIS)

Houts, M.G.; Lee, S.K.

1994-01-01

A lunar space fission power supply shield that uses a combination of lunar regolith and materials brought from earth may be optimal for early lunar outposts and bases. This type of shield can be designed such that the fission power supply does not have to be moved from its landing configuration, minimizing handling and required equipment on the lunar surface. Mechanisms for removing heat from the lunar regolith are built into the shield, and can be tested on earth. Regolith activation is greatly reduced compared with a shield that uses only regolith, and it is possible to keep the thermal conditions of the fission power supply close to these seen in free space. For a well designed shield, the additional mass required to be brought fro earth should be less than 1000 kg. Detailed radiation transport calculations confirm the feasibility of such a shield

Lunar surface fission power supplies: Radiation issues

International Nuclear Information System (INIS)

Houts, M.G.; Lee, S.K.

1994-01-01

A lunar space fission power supply shield that uses a combination of lunar regolith and materials brought from earth may be optimal for early lunar outposts and bases. This type of shield can be designed such that the fission power supply does not have to be moved from its landing configuration, minimizing handling and required equipment on the lunar surface. Mechanisms for removing heat from the lunar regolith are built into the shield, and can be tested on earth. Regolith activation is greatly reduced compared with a shield that uses only regolith, and it is possible to keep the thermal conditions of the fission power supply close to those seen in free space. For a well designed shield, the additional mass required to be brought from earth should be less than 1,000 kg. Detailed radiation transport calculations confirm the feasibility of such a shield

Dating of zircons by the fission track method

International Nuclear Information System (INIS)

Tenorio Hernandez, L.M.

1992-01-01

This work describes the methodology to date zircons by the Fission Track Method. A brief discussion is made of the physical principles of the method, physical properties of zircons and the geochemical properties of uranium. When starting with a hand sample, a mineral separation is required; to do this the following steps are needed: crushing and sieving of the sample, washing and drying, magnetic separation, heavy liquid separation (Bromoform 2.89 g/cm 3 , Diyodomethane = 3.31 g/cm 3 ), and manual separation on a stereoscopic microscope. Once the zircon concentrate is obtained, these are mounted on a FEP teflon mount, then polished and etched on an eutectic mix of 10 g. of KOH + 7.2 g. of NaOH, heated to 210 Centigrade degrees. Afterwards the mounts are prepared for irradiation, sterilizing and putting on top of them an external detector (a thin sheet of muscovite poor in uranium content). The package is then wrapped in plastic and sent to the reactor together with standard zircons of known age (Fish Canyon Tuff: Naeser et.al., 1981), mounted in the same way, plus standard glasses of known uranium content. The package was irradiated in a site known as SIRCA (Rotatory Capsules Irradiation System). Then the package is left to decay for several days, and then the external detectors are etched in a 48% concentrated hydrofluoric acid for 5 minutes. Once the samples are processed through the mentioned steps, spontaneous tracks appear in the zircons and induced tracks appear in the external detectors. On counting the tracks one obtains ρ s (spontaneous track density) and ρ 1 (induced track density). These two parameters together with another one called '#zeta #' (obtained from the standard zircons and glasses), are used to obtain the age of the sample. Zircons from Cerro de Mercado, Durango were dated and the age obtained was 30 ±5 Ma. This date is in agreement with similar results obtained by Fleisher and Naeser (1975) for zircons of the same locality and dated by the

Application of fission track detectors to californium-252 neutron dosimetry in tissue near the radiation source

International Nuclear Information System (INIS)

Oswald, R.A.; Lanzl, L.H.; Rozenfeld, M.

1981-01-01

Fission track detectors were applied to a unique problem in neutron dosimetry. Measurements of neutron doses were required at locations within a tumor of 1 cm diameter implanted on the back of a mouse and surrounded by a square array of four 252 Cf medical sources. Measurements made in a tissue-equivalent mouse phantom showed that the neutron dose rate to the center of the tumor was 2.18 rads mg -1 h -1 +- 8.4%. The spatial variation of neutron dose to the tumor ranged from 1.88 to 2.55 rads mg -1 h -1 . These measurements agree with calculated values of neutron dose to those locations in the phantom. Fission track detectors have been found to be a reliable tool for neutron dosimetry for geometries in which one wishes to know neutron dose values which may vary considerably over distances of 1 cm or less

Application of fission track detectors to californium-252 neutron dosimetry in tissue near the radiation source

International Nuclear Information System (INIS)

Oswald, R.A.; Lanzl, L.H.; Rozenfeld, M.

1981-01-01

Fission track detectors were applied to a unique problem in neutron dosimetry. Measurements of neutron doses were required at locations within a tumor of 1 cm diameter implanted on the back of a mouse and surrounded by a square array of four 252 Cf medical sources. Measurements made in a tissue-equivalent mouse phantom showed that the neutron dose rate to the center of the tumor was 2.18 rads micrograms-1 h-1 +/- 8.4%. The spatial variation of neutron dose to the tumor ranged from 1.88 to 2.55 rads micrograms-1 h-1. These measurements agree with calculated values of neutron dose to those locations in the phantom. Fission track detectors have been found to be a reliable tool for neutron dosimetry for geometries in which one wishes to know neutron dose values which may vary considerably over distances of 1 cm or less

Thorium determination in water and biological materials by fission track

International Nuclear Information System (INIS)

Melo Ferreira, A.C. de.

1989-01-01

As a segment of a research programme on the study of bioaccumulation of radionuclides, in animals and vegetables from Morro do Ferro, Pocos de Caldas, MG, a fission track method for the determination of low levels of thorium in environmental samples was developed as an alternative for alpha spectroscopy. The study was carried out in early alpha spectroscopy samples, containing high levels of 228 Th activity, which makes difficult the 232 Th determination. A dry way method for thorium evaluation was developed. Pieces of membrane filters, containing La F 3 (Th), coupled to Makrofol detectors, were irradiated in the core of a research reactor, IEA-R1 (IPEN). (author)

Observations on the geometries of etched fission and alpha-recoil tracks with reference to models of track revelation in minerals

International Nuclear Information System (INIS)

Jonckheere, R.; Enkelmann, E.; Stuebner, K.

2005-01-01

The kinetic and atomistic theories of crystal growth and dissolution are used to interpret the shapes and orientations of fission-track, recoil-track and dislocation etch pits in tri-octahedral phlogopite and di-octahedral muscovite. An atomistic approach combined with symmetry considerations lead to the identification of the periodic bond chains that determine the etch pit morphologies and relative etch rates at a chemical level: O-Mg-O in phlogopite, O-Mg-O-Fe in biotite and O-Al-O in muscovite. Using first-order estimates of the bond strengths, it is possible to account for the relative track etch rates in these minerals. The reported, sometimes simultaneous, occurrence of triangular, polygonal and hexagonal etch pit contours in phlogopite, some of which violate the crystal symmetry, suggests that the cohesion of the phlogopite lattice is lost over a much larger radius than that of the track core around the trajectories of particles for which the energy loss exceeds a threshold value. This is interpreted as an indication of pronounced sublattice and anisotropic effects during track registration

Fission track ages and uranium concentration of apatites of different rocks of South India

International Nuclear Information System (INIS)

Nand Lal; Nagpaul, K.K.; Nagpal, M.K.

1975-01-01

The uranium concentration and ages of apatite grains of various rocks of South India have been measured by fission track technique. The ages range from 100 m.y. to 730 m.y. whereas uranium concentrations vary from 0.5 to 23.8 atom/million atoms of the apatite mineral. The ages agree well with the Deccan volcanic and Ocean Cycle activities. (author)

Timing of tertiary extension in the Southern Canadian Cordillera: constraints from fission-track analysis in the Shuswap metamorphic complex

International Nuclear Information System (INIS)

Lorencak, M.; Seward, D.; Burg, J.-P.

1999-01-01

Full text: Nine zircon and eighteen apatite fission-track analyses have been made in order to determine the low temperature cooling history of the Shuswap metamorphic core complex, western Canada. The zircons vary in apparent age from 53.9 ± 5.6 to 37.5 ± 5.0 Ma and the apatites from 48.5 ± 3.2 to 27.7 ± 3.4 Ma. In the footwall of the detachment faults defining the core complex, the cooling histories show a similarity until temperatures of ∼250 C were reached at about 45 Ma. From then on, activity on two normal faults, the Columbia River Fault and the Victor Creek Fault, controlled the regional cooling pattern. The ages and the combination of ages fall into four groups and on the basis of the fission-track data, we suggest that the region can now be divided into four thermotectonic units which are the result of differing tectonic controls during regional extension. Additionally, a complete cooling history of the Shuswap core complex can now be reconstructed, using constraints from U-Pb, Rb-Sr and K-Ar age data from several authors as well as the fission track results presented here. Copyright (1999) Geological Society of Australia

Determination of the effective range of fission fragments in UO2 and of the disintegration constant for the spontaneous fission of Uranium 238

International Nuclear Information System (INIS)

Spaggiari, E.R.V.

1980-01-01

Results are presented of measurements realized aiming to determine the disintegration constant of spontaneous fission of U-238, with a discussion of the method utilized in the detection of fission tracks in muscovite. Several blades of mica were placed between two cylinders of Uo 2 to be irradiated with the fragments of spontaneous fission of U-238, and the fission tracks duly enlarged after a convenient chemical action were observed with a projection optical microscope. The effective thickness of UO 2 contributing to the observed tracks was measured through the irradiation of mica samples juxtaposed to the UO 2 cylinder, with 14,0 MeV neutrons from the (d,t 2 ) reaction. The detection efficiency of fission tracks originated in that thickness is practically 100% [pt

Mesozoic and Cenozoic uplift and exhumation of the Bogda Mountain, NW China: Evidence from apatite fission track analysis

Directory of Open Access Journals (Sweden)

Wenhao Tang

2015-07-01

Full Text Available Apatite fission track (AFT analysis on samples collected from a Paleozoic series is used to constrain the cooling history of the Bogda Mountain, northwest China. AFT ages range from 136.2 to 85.6 Ma and are younger than rock depositional ages and the mean confined track lengths (11.0–13.2 μm mostly showing unimodal distribution are shorten, indicating significant track-annealing. Thermal histories modeling based on the distribution of fission-track lengths combined with the regional geological data show that two rapid cooling phases occurred in the latest Jurassic–early Cretaceous and the Oligocene–Miocene. Those new data together with previous published data show that the AFT ages become younger from the southwest to northeast in the western Bogda Mountain and its adjacent areas. The fission-track ages of the southwest area are relatively older (>100 Ma, recording the earlier rapid uplift phase during the late Jurassic–Cretaceous, while the ages in the north piedmont of the Bogda Mountain (namely the northeast part are younger (<60 Ma, mainly reflecting the later rapid uplift phase in the Oligocene–Miocene. The trend of younger AFT ages towards the northeast might be explained by post-Cretaceous large-scale crustal tilting towards the southwest. In the thrust fault-dominated northern limbs of the Bogda Mountain, AFT ages reveal a discontinuous pattern with age-jumps across the major fault zones, showing a possible strata tilting across each thrust faults due to the thrust ramps during the Cenozoic. The two rapid uplift stages might be related to the accretion and collision in the southern margin of the Asian continent during the late Jurassic and late Cenozoic, respectively.

Fission track analysis of Pu in small specimens of biological material: Technical progress report, August 1, 1987--July 31, 1988

International Nuclear Information System (INIS)

Wrenn, M.E.

1988-01-01

The objective of this research is to develop a highly specific and ultrasensitive method capable of detecting 100 aCi/liter of 239 Pu in human urine. The method using neutron induced fission track analysis is to be made free of interference from uranium, the only naturally occurring element with an isotope which fissions with thermal neutrons. A simplified flow diagram for the method is shown in Figure 1. Briefly 239 Pu is coprecipitated quantitatively from urine with rhodozonic acid. The precipitate containing the 239 Pu is dissolved in HCl and is sequentially passed through two ion exchange columns and reduced in volume. The element is then deposited in a circular area on a thick polycarbonate detector and a thinner detector is placed over the circular deposit. The plastic detectors are then irradiated to a high thermal neutron fluence in a research reactor. The detectors are etched in a caustic solution for controlled times and temperatures in order to develop the fission tracks. Images of tracks are formed both on the thin and thick plastic detectors. Total tracks in the thinner detector are measured with a locally developed spark counter and in the thick plastic are measured by counting with a microscope. The results will be made quantitative by constructing a calibration curve for 239 Pu. 3 refs., 9 figs., 3 tabs

Fission track dating of tuffaceous eocene formations of the North Bakony Mountains (Transdanubia, Hungary)

International Nuclear Information System (INIS)

Dunkl, I.

1990-01-01

Fission track dating was performed in accessory minerals of strongly altered, clay mineralized tuffite strata lying in the upper part of the Eocene sequence of the North Bakony Mountains. The homogeneity of the fission track (FT) ages measured on apatite and zircon refers only to insignificant redeposition, no remarkable mingling of the detrital matter vould be stated. The average of the FT-ages falls to the Bartonian, into the time interval determined by nannoplankton guide horizons for the volcanic activity (41.9 ± 4.1 Ma). As to their biostratigraphic age the Middle Eocene samples show an FT-average of 44.2 ± 3.4 Ma, the average of the Upper Eocene group is 39.9 ± 4.1 Ma. The difference between the two groups refers to the two phases of the volcanic activity. The first maximum of volcanism generated the Upper Lutetian to Bartonian glauconitic sequence while the second maximum at the Bartonian-Priabonian boundary produced the tuff strata. The strata in the neighbouring areas relate to continuous volcanism in the Upper Eocene, in the studied area, however, the upper part of the Priabonian was eroded. (author) 51 refs.; 4 figs.; 1 tab

Determination of the uranium concentration in water samples by the technique of fission track recording

International Nuclear Information System (INIS)

Geraldo, L.P.

1979-01-01

The technique of fission track register was developed for the determination of micrograms of uranium. The Makrofol KG, a synthetic plastic made by Bayer, was used as the detector and the wet method was utilized. The detector calibration curve allows the determination of the uranium concentration in a sample within an interval from 8.0 to 0.4μgU/L, the total error ranging from 3.3% to 29.0% respectively. The method was used in the determination of the uranium content in various water samples, obtained from various sources like rivers, sea etc. in the state of Sao Paulo, Brazil. Results were compared with those obtained by other authors using different methods. The average concentration found in sea waters (3.27 +- 9.12μgU/l) by this method is compatible with the international average accepted value of 3.3μgU/l, irrespective of site and depth. The determination of the uranium content by fission track counting has proved to be very convenient. (Author) [pt

Thermal history of the multi-well experiment (MWX) site, Piceance Creek Basin, Northwestern Colorado, derived from fission-track analysis

International Nuclear Information System (INIS)

Kelley, S.A.; Blackwell, D.D.

1990-01-01

Fission-track analysis of apatite and zircon from 19 depth intervals in two drill holes at the MWX site in the Piceance Creek Basin, Colorado, is used to determine the burial and subsequent cooling history of the Upper Cretaceous Mesaverde Group and the Paleocene Wasatch Formation. The fission-track data, as well as available temperature, vitrinite reflectance, and geological information, indicate that the sampled sediments attained maximum burial at approximately 10 Ma, with maximum temperatures in the 150-200 0 C range. After 10 Ma the sediments began to cool during erosion related to the downcutting of the Colorado River, which lies just to the north of the MWX site. The heat flow in this area has remained relatively constant for the past 10 Ma. (author)

Inverted Apatite (U-Th)/He and Fission-track Dates from the Rae craton, Baffin Island, Canada and Implications for Apatite Radiation Damage-He Diffusivity Models

Science.gov (United States)

Ault, A. K.; Reiners, P. W.; Thomson, S. N.; Miller, G. H.

2015-12-01

Coupled apatite (U-Th)/He and fission-track (AFT) thermochronology data from the same sample can be used to decipher complex low temperature thermal histories and evaluate compatibility between these two methods. Existing apatite He damage-diffusivity models parameterize radiation damage annealing as fission-track annealing and yield inverted apatite He and AFT dates for samples with prolonged residence in the He partial retention zone. Apatite chemistry also impacts radiation damage and fission-track annealing, temperature sensitivity, and dates in both systems. We present inverted apatite He and AFT dates from the Rae craton, Baffin Island, Canada, that cannot be explained by apatite chemistry or existing damage-diffusivity and fission track models. Apatite He dates from 34 individual analyses from 6 samples range from 237 ± 44 Ma to 511 ± 25 Ma and collectively define a positive date-eU relationship. AFT dates from these same samples are 238 ± 15 Ma to 350 ± 20 Ma. These dates and associated track length data are inversely correlated and define the left segment of a boomerang diagram. Three of the six samples with 20-90 ppm eU apatite grains yield apatite He and AFT dates inverted by 300 million years. These samples have average apatite Cl chemistry of ≤0.02 wt.%, with no correlation between Cl content and Dpar. Thermal history simulations using geologic constraints, an apatite He radiation damage accumulation and annealing model, apatite He dates with the range of eU values, and AFT date and track length data, do not yield any viable time-temperature paths. Apatite He and AFT data modeled separately predict thermal histories with Paleozoic-Mesozoic peaks reheating temperatures differing by ≥15 °C. By modifying the parameter controlling damage annealing (Rmr0) from the canonical 0.83 to 0.5-0.6, forward models reproduce the apatite He date-eU correlation and AFT dates with a common thermal history. Results imply apatite radiation damage anneals at

Experimental study of a methodology for Fission-track Dating without neutron irradiation

International Nuclear Information System (INIS)

Hadler, J.C.; Iunes, P.J.; Tello, C.A.; Chemale, F.; Kawashita, K.; Curvo, E.A.C.; Santos, F.G.S.; Gasparini, T.E.; Moreira, P.A.F.P.; Guedes, S.

2009-01-01

To carry out the dating by the Fission Track Method (FTM) the international community that works with this method employs methodologies in which the mineral to be dated must be irradiated with neutrons. Such irradiation, performed in a nuclear reactor, demand a relatively long waiting time so that the activity of the sample attain a proper level for handling. The present work aims to establish a methodology that makes possible the dating by FTM using a mass spectrometer instead of a nuclear reactor. This methodology was applied to apatite samples from Durango, Mexico.

New insight on the high radiation resistance of UO{sub 2} against fission fragments

Energy Technology Data Exchange (ETDEWEB)

Szenes, G., E-mail: szenesgyorgy@caesar.elte.hu

2016-12-15

Track radii are derived for semiconductors from a temperature distribution Θ(r) in which the width of the distribution is the only materials parameter. Analysis of track data for GeS, InP, GaAs and GaN show that the projectile velocity has no effect on track radii in semiconductors. Due to the missing velocity effect, the threshold for track formation, S{sub et} = 20 keV/nm is high in semiconducting UO{sub 2} in the whole range of projectile velocities. This is the origin of the high radiation resistance for fission fragments. Consequences for the simulation experiments with insulating CeO{sub 2} are discussed. It is verified that sputtering is described accurately by the Arrhenius equation for various materials including UO{sub 2}. The ion-induced surface potential has a strong effect on the activation energy. - Highlights: • Uniform features of track formation are demonstrated. • Semiconductors are more stable than insulators against fission fragments. • Melting point and width of the thermal spike control the track size. • High threshold for tracks S{sub et} = 20 keV/nm for fission fragments in semiconducting UO{sub 2}. • An Arrhenius equation describes the inelastic sputtering in UO{sub 2} and other solids.

Comparing the effects of infrastructure on bicycling injury at intersections and non-intersections using a case–crossover design

Science.gov (United States)

Harris, M Anne; Reynolds, Conor C O; Winters, Meghan; Cripton, Peter A; Shen, Hui; Chipman, Mary L; Cusimano, Michael D; Babul, Shelina; Brubacher, Jeffrey R; Friedman, Steven M; Hunte, Garth; Monro, Melody; Vernich, Lee; Teschke, Kay

2013-01-01

Background This study examined the impact of transportation infrastructure at intersection and non-intersection locations on bicycling injury risk. Methods In Vancouver and Toronto, we studied adult cyclists who were injured and treated at a hospital emergency department. A case–crossover design compared the infrastructure of injury and control sites within each injured bicyclist's route. Intersection injury sites (N=210) were compared to randomly selected intersection control sites (N=272). Non-intersection injury sites (N=478) were compared to randomly selected non-intersection control sites (N=801). Results At intersections, the types of routes meeting and the intersection design influenced safety. Intersections of two local streets (no demarcated traffic lanes) had approximately one-fifth the risk (adjusted OR 0.19, 95% CI 0.05 to 0.66) of intersections of two major streets (more than two traffic lanes). Motor vehicle speeds less than 30 km/h also reduced risk (adjusted OR 0.52, 95% CI 0.29 to 0.92). Traffic circles (small roundabouts) on local streets increased the risk of these otherwise safe intersections (adjusted OR 7.98, 95% CI 1.79 to 35.6). At non-intersection locations, very low risks were found for cycle tracks (bike lanes physically separated from motor vehicle traffic; adjusted OR 0.05, 95% CI 0.01 to 0.59) and local streets with diverters that reduce motor vehicle traffic (adjusted OR 0.04, 95% CI 0.003 to 0.60). Downhill grades increased risks at both intersections and non-intersections. Conclusions These results provide guidance for transportation planners and engineers: at local street intersections, traditional stops are safer than traffic circles, and at non-intersections, cycle tracks alongside major streets and traffic diversion from local streets are safer than no bicycle infrastructure. PMID:23411678

The obsidian from Quiron (Salta Province, Argentina): a new reference glass for fission-track dating

Energy Technology Data Exchange (ETDEWEB)

Bigazzi, G. [Istituto di Geoscienze e Georisorse, C.N.R., Area della Ricerca di Pisa, V.G. Moruzzi, 1, 56124 Pisa (Italy)]. E-mail: g.bigazzi@igg.cnr.it; Laurenzi, M.A. [Istituto di Geoscienze e Georisorse, C.N.R., Area della Ricerca di Pisa, V.G. Moruzzi, 1, 56124 Pisa (Italy); Viramonte, J.G. [Instituto Geonorte, Universidad Nacional de Salta and Conicet, Buenos Aires 177, 4400 Salta (Argentina)

2005-12-01

In the course of a geochronological study of the volcanic activity in the Andean Cordillera in northern Argentina, we have found in the El Quevar volcanic complex (24 deg. 19{sup '}S/66 deg. 43{sup '}W,6180m) a phenocryst poor obsidian (Quiron obsidian) showing an unusually high spontaneous track density. Defects which might produce 'spurious' tracks are virtually absent. Application of fission-track dating using an absolute approach, based on the IRMM-540 standard glass for neutron fluence measurements, yielded an apparent age of 7.27+/-0.29Ma(1{sigma}) and a plateau age of 8.99+/-0.31Ma(1{sigma}). A {sup 40}Ar-{sup 39}Ar isochron age on biotite of 8.61+/-0.04Ma(1{sigma}) was already available for the Quiron rhyolite. We determined further {sup 40}Ar-{sup 39}Ar ages on several chips of the glass itself using two analytical approaches: total fusion with a focussed laser beam (LTFA) and a step-heating approach using a de-focussed laser beam (LSHA). We have obtained a weighted average of 8.77+/-0.09Ma, an isochron age of 8.71+/-0.12Ma and an integrated age of 8.77+/-0.09Ma for LTF analyses, and a w.a. of 8.75+/-0.09Ma, an iso.a. of 8.77+/-0.09Ma and an int.a. of 8.77+/-0.09Ma for LSH analyses (all age errors are 2{sigma}). The Quiron obsidian is very easy to analyse for its high spontaneous track density and because microlites which might produce spurious tracks are very rare. Independent reference {sup 40}Ar-{sup 39}Ar ages determined in different laboratories are available. For these reasons we believe that this glass may be very useful for testing fission-track system calibrations and apparent age correction procedures. Splits of obsidian Quiron will be distributed upon request to colleagues who intend to test it.

Cumulative fission yield of Ce-148 produced by thermal-neutron fission of U-235

International Nuclear Information System (INIS)

Hasan, A.A.

1984-12-01

Cumulative fission yield of 148 cesium isotopes and some other fission products produced by thermal-neutron fission of 235 uranium is determined by Germanium/Lithium spectroscopic methods. The measuremets were done at Tsing-Hua open pool reactor using 3 to 4 mg of 93.15% enriched 235 uranium samples. Gamma rays are assigned to the responsible fission products by matching gamma rays energies and half lives. Fission rate is calculated by fission track method. Cumulative fission yields of 148 cesium, 90 krypton, 130 iodine, 144 lanthanum, 89 krypton, 136 xenon, 137 xenon and 140 cesium are calculated. This values are compared with previously predicted values and showed good agreement. 21 Ref

Response study of fission track detectors using two different moderator designs in a high-energy radiation field

Energy Technology Data Exchange (ETDEWEB)

Mayer, S. [Paul Scherrer Institut, CH-5232 Villigen PSI (Switzerland)], E-mail: Sabine.Mayer@psi.ch; Boschung, M.; Fiechtner, A. [Paul Scherrer Institut, CH-5232 Villigen PSI (Switzerland); Fuerstner, M. [CERN, CH-1211 Geneva 23 (Switzerland); Wernli, C. [Paul Scherrer Institut, CH-5232 Villigen PSI (Switzerland)

2008-02-15

Fission track detectors in the center of moderating spheres are routinely used to measure the ambient dose equivalent due to neutrons in the environmental dosimetry at Paul Scherrer Institut (PSI). Originally, the system was designed to cope with neutrons from skyshine effects. Later, the system was also adapted behind the shielding of PSI's accelerators. Nowadays, as a consequence of continuously upgrading accelerator energies and intensities, the neutron energy behind thick shielding can range from fractions of eV to about 1 GeV (e.g. at CERN). For this reason a measurement campaign in a high-energy stray radiation field at CERN's High-Energy Reference Field Facility (CERF) was initiated to study and compare the response of the already existing detector-moderator configuration and a new design, the 'GSI ball'. Employing an additional lead layer in a moderator sphere of 32.5 cm diameter, the GSI ball was primarily designed for the use with thermoluminescent based dosimeters in its center in order to optimize the response for the measurement of H*(10) to higher neutron energies. In this work, the measurement results for fission track detectors using two different radiator materials in the PSI and the GSI moderator are presented. Based on these studies, on the one hand, field calibration factors for the use in presumably similar high-energy fields around accelerators could be deduced. On the other hand, it could be shown that there is no need to replace the established PSI moderator by the GSI moderator since the combination of fission track detector and GSI moderator does not result in a significant sensitivity improvement.

Response study of fission track detectors using two different moderator designs in a high-energy radiation field

International Nuclear Information System (INIS)

Mayer, S.; Boschung, M.; Fiechtner, A.; Fuerstner, M.; Wernli, C.

2008-01-01

Fission track detectors in the center of moderating spheres are routinely used to measure the ambient dose equivalent due to neutrons in the environmental dosimetry at Paul Scherrer Institut (PSI). Originally, the system was designed to cope with neutrons from skyshine effects. Later, the system was also adapted behind the shielding of PSI's accelerators. Nowadays, as a consequence of continuously upgrading accelerator energies and intensities, the neutron energy behind thick shielding can range from fractions of eV to about 1 GeV (e.g. at CERN). For this reason a measurement campaign in a high-energy stray radiation field at CERN's High-Energy Reference Field Facility (CERF) was initiated to study and compare the response of the already existing detector-moderator configuration and a new design, the 'GSI ball'. Employing an additional lead layer in a moderator sphere of 32.5 cm diameter, the GSI ball was primarily designed for the use with thermoluminescent based dosimeters in its center in order to optimize the response for the measurement of H*(10) to higher neutron energies. In this work, the measurement results for fission track detectors using two different radiator materials in the PSI and the GSI moderator are presented. Based on these studies, on the one hand, field calibration factors for the use in presumably similar high-energy fields around accelerators could be deduced. On the other hand, it could be shown that there is no need to replace the established PSI moderator by the GSI moderator since the combination of fission track detector and GSI moderator does not result in a significant sensitivity improvement

A study of the effect of natural radiation damage in a zircon crystal using thermoluminescence, fission track etching and X-ray diffraction

International Nuclear Information System (INIS)

Amin, Y.M.

1989-01-01

The natural radiation damage in zircon caused by the decay of uranium and thorium, present as impurities, is studied. The radiation damage is first gauged by etching the fission tracks. It is found that thermoluminescence (TL) sensitivity (defined as light output per unit test-dose) decreases as the radiation damage increases, suggesting a destruction of TL centers. The spacing d of the (112)-plane is also measured. It is also found that the d-value increases with radiation damage, suggesting the displacement of atoms from their normal lattice sites. However, as the track density increases beyond ≅ 3x10 6 tracks/cm 2 , the d-value remains at ≅ 2.52 A. By annealing the crystal, the displaced atoms are found to return to the original lattice sites, and this is followed by a reduction in d-value as well as the recovery of TL sensitivity. The fission track density also decreases and all the tracks disappear at the annealing temperature of ≅ 800 0 C. (orig.)

Alkaline glass as induced fission fragment detectors

International Nuclear Information System (INIS)

Amorim, A.M.M.

1986-01-01

The slide glass, registered trade marks INLAB, INVICT and PERFECTA were compared. For the three kinds of glasses the following studies were done: chemical composition; general dissolution rate for hydrofluoric acid solutions of concentrations between 1 and 10M, at 30 0 C and ultrasound shaking; relative efficiency for recording fission fragment tracks from 252 Cf. The INLAB glass was selected due to the better quality of its surface after chemical etching. The HF concentration 2.5M was determined for chemical etching of INLAB glass, and the optimum etching time was chosen between 8 and 10 minutes. The thermal attenuation of latent tracks in the environmental temperature was observed for intervals uo to 31 days between the detector exposure to the fission fragment source and etching of tracks. Several methods were used for determining the detector parameters, such as: critical angle, angle of the cone and efficiency of etching. The effects of gamma irradiation from 60 Co and reactor neutrons in material properties as track detector were studied. Attenuation of latent tracks and saturation of color centers were observed for doses over 100M Rad. Since this kind of material contains uranium as impurity, uniformely distributed, slide glass were calibrated to be applied as a monitor of thermal neutron flux in nuclear reactor. (Author) [pt

On the long standing question of nuclear track etch induction time: Surface-cap model

International Nuclear Information System (INIS)

Rana, Mukhtar Ahmed

2008-01-01

Using a systematic set of experiments, nuclear track etch induction time measurements in a widely used CR-39 detector were completed for accessible track-forming particles (fission fragments, 5.2 MeV alpha particles and 5.9 MeV antiprotons). Results of the present work are compared with appropriately selected published results. The possibility of the use of etch induction time for charged particle identification is evaluated. Analysis of experimental results along with the use of well-established theoretical concepts yielded a model about delay in the start of chemical etching of nuclear tracks. The suggested model proposes the formation of a surface-cap (top segment) in each nuclear track consisting of chemically modified material with almost same or even higher resistance to chemical etching compared with bulk material of the track detector. Existing track formation models are reviewed very briefly, which provide one of the two bases of the proposed model. The other basis of the model is the general behavior of hot or energised material having a connection with an environment containing a number of species like ordinary air. Another reason for the delay in the start of etching is suggested as the absence of localization of etching atoms/molecules, which is present during etching at depth along the latent track

Relationship between thermotectonic evolution of Serra do Mar mountain range and Santos Basin, SP, Brazil, accessed through fission track analysis in apatite

International Nuclear Information System (INIS)

Hadler, J.C; Tello, S.C.A; Iunes, P.J.; Guedes, S; Hackspacher, P; Paulo, S.R; Ribeiro, L.F.B

2001-01-01

Thermal evolution of tectonic units and its reflection on neighbouring basins adds importance to the study of some geological regions because this kind of process can be related to the origin of petroleum fields. During the last decade, thermochronology using the fission track method (FTM) in apatite was set up as an useful tool to obtain information from thermal histories (for instance, Rhorman et al., 1996; Amaral et al., 1997; Guedes et al., 2000). Thermal instability of fission tracks in some minerals is the basis of thermochronology by the FTM. In the case of apatite, there is a concordance in the temperature-time interval (∼70-110 o C for several tens of Ma) in which prehistoric forests were transformed in underground petroleum and a measurable shortening of fossil tracks. When spontaneous fission of a 238 U nucleus take place inside a mineral, a disarranged zone is created in the neighboring crystalline lattice (the latent track). This phenomenon is reversible since the atoms that were dislocated due to fission can come back to their original positions as consequence of thermal episodes of geological origin. This process can lead to partial or total reconstruction of the crystalline lattice around a latent track; it is named annealing in the literature. Fission tracks are continuously produced in apatite. Then, those prior to a thermal episode should present shorter lengths than those produced after it. In this way, by measuring the track length distribution at the optical microscope, after a suitable etching, one can obtain information about the thermal history of the region where an apatite sample was collected (Amaral et al., 1997). In spite of the effort carried out to understand track annealing kinetics (for instance, Carlson, 1990; Hadler et al., 2001), this phenomenon is not well known yet. To avoid this difficulty, annealing has been described using empirical models based on the best fitting of experimental data obtained in times compatible with

Reconstructing Surface Triangulations by Their Intersection Matrices 26 September 2014

Directory of Open Access Journals (Sweden)

Arocha Jorge L.

2015-08-01

Full Text Available The intersection matrix of a simplicial complex has entries equal to the rank of the intersecction of its facets. We prove that this matrix is enough to define up to isomorphism a triangulation of a surface.

Enlarging the fission fragment tracks in glass detectors by etching in weak solutions of HF - a safe etchant

International Nuclear Information System (INIS)

Singh, V.P.; Sharma, A.P.

1982-01-01

The effect of etchant concentration and temperature on track revelation properties of soda glass detectors has been studied. Etch rate ratio, maximum observable diameter and the energy resolution of the fission fragment tracks of 252 Cf in glasses are increased when the samples are etched in 1.25 vol% HF as compared to higher concentrations of HF and other etching solutions. The critical angle of etching is found to decrease with decrease in etchant concentration. The activation energies for bulk etching and track etching have also been estimated. Better results were obtained by using lower etching temperatures. (author)

Experimental survey of the potential energy surfaces associated with fission

International Nuclear Information System (INIS)

Britt, H.C.

1980-01-01

Progress in the experimental determination of the properties of the potential energy surface associated with fission is reviewed. The importance of nuclear symmetry effects on the calculation of fission widths is demonstrated. Evidence is presented for the fragmentation of the mass-asymmetric second barrier in the thorium region and the axial asymmetric first barrier in the californium region. Detailed analyses of experimental data suggest the presence of two parallel second barriers; the normal mass-asymmetric, axial-symmetric barrier and a slightly higher mass-symmetric, axial-asymmetric barrier. Experimental barrier parameters are determined systematically and compared with calculations from various theoretical models. Techniques for expanding fission probability measurements to higher energies are discussed. (author)

Thermo chronology by the fission track method of a passive marge (Ponta Grossa dome in south-eastern Brazil) and within a collision chain (external zone of the alpine arch in France)

International Nuclear Information System (INIS)

Medeiros Vignol Lelarge, M.L.

1993-01-01

The dating method by counting fission tracks on apatite (this rock is a geo-thermometer sensitive to weak temperature changes below 150 Celsius degrees) is an efficient tool for the thermal history of rocks. We have used this method in 2 different geological contexts: the Ponta Grossa dome in south-eastern Brazil and the alpine mountain in France. This dating method is based on the fact that some rocks like mica keep fossil remains of the passage of the fission products emitted during the simultaneous fission of uranium 238 present in the rock. This method requires the irradiation in a slow neutron flux of the sample because the initial quantity of uranium is unknown. The age t of the sample is given by the formula: t=(1/l 1 )*ln[1+(r s /r i )*(l 2 /l 1 )*F*σ*I] where: l 1 is the alpha decay constant of U 238 ; l 2 is the simultaneous fission decay constant of U 238 , r s is the number of fission tracks in the sample before the irradiation; r i is the number of fission tracks induced by the irradiation; F is the thermal neutron flux; σ is the thermal fission cross-section of U 235 ; and I is the isotopic rate U 235 /U 238 . This document is divided into 4 chapters. The first chapter presents the general principle of the method, the mechanisms capable of producing fission tracks and the techniques used to make these tracks visible with an optical microscope. The second chapter deals with the conditions of the irradiation and the calibration of the method. The 2 last chapters are dedicated to the applications to the 2 geological contexts. (A.C.)

Apatite fission track dating of the Northern Western Shield, Western Australia

International Nuclear Information System (INIS)

Weber, U.D.; Kohn, B.P.; Gleadow, A.J.W.

1999-01-01

Full text:The investigation of the thermotectonic evolution of the northern part of the Precambrian Western Shield of Western Australia using apatite fission track (AFT) thermochronology is the main focus of this study. The study area encompasses Precambrian rocks of the Pilbara Craton and the northern part of the Yilgarn Craton including the Narryer Gneiss Complex. AFT data, mostly from the Archaean cratons reveal cooling ages ranging between 260±8 Ma and 400±20 Ma. Mean confined horizontal track lengths fall between ∼12 and 13 μm with standard deviations ranging from 1.1-2.2 μm. Forward modelling of time-temperature history paths for representative samples reveals a period of regional cooling of at least ∼50 deg C in the late Palaeozoic. Most paths also show a second period of cooling of 25 deg C from temperatures of ∼80-85 deg C. This later cooling episode occurred in the Mesozoic but its timing is less well constrained. Assuming that the average present day geothermal gradient of ∼18±2 deg C per km - 1 was prevalent since the late Palaeozoic, then the minimum of ∼75 deg C of cooling predicted by the fission track modelling suggests overall denudation of at least ∼ 3.7-4.6 km of section since that time. Phanerozoic basins (Perth, Carnarvon and Canning) adjacent to the north and west of the northern Western Shield mostly continue offshore and form complex structures containing up to ∼ 15 km of predominantly clastic sediments of early Ordovician to late Cretaceous age. The basins are likely to have been depocentres for much of the detritus derived from the denudation inferred from the cooling recorded by the AFT. Possible causative events which could be linked to the observed late Palaeozoic cooling are tectonism related to the collision of Gondwanaland with Laurussia in Carboniferous time forming the supercontinent Pangea or a possible far-field effect related to the Alice Springs Orogeny. Further low temperature thermochronological studies

Measurements of the effective range of fission fragments in UO2 and the disintegration constant for spontaneous fission of 238U

International Nuclear Information System (INIS)

Spaggiari, E.R.V.

1978-01-01

The results of measuments of the disintegration constant for spontaneous fission in 238 U are presented, with a discussion on the method used for the detection of fission tracks in muscovite mica. Samples of muscovite mica sandwiched between two natural uranium dioxide cylinders were irradiated with fragments of spontaneous fission and the etched tracks counted with projetion optical microscope. The effective thickness of the UO 2 layer which contributed to the observed tracks was measured through irradiation of mica samples, in contact with the UO 2 cylinder with 14,0 MeV neutrons from a (d,t) reaction. (Author) [pt

Fission track dating evidence on tectonic activities of northern Himalaya block

International Nuclear Information System (INIS)

Yuan Wanming; Wang Shicheng; Wang Lanfen

2002-01-01

Fission track ages (FTA) of 4 apatite samples collected from Langkazi to Yarlung Zangbo thrust zone range between 13.6 and 17.2 Ma, reflecting the time of continent-continent collision and differing from previous data. The negative correlation between the FTA and sample elevations shows there was rapid uplifting during the continent-continent collision with uplifting rate of 176 m/Ma. Denudation degree, denudation rate and cooling rate were ∼2.9 km, 213 m/Ma and 7 degree C/Ma respectively since 13.6 Ma. FTA of 3 zircon samples are different significantly and have x 2 test value of < 0.1%, confirming the orogeny within continent went under low temperature

Image-based rendering of intersecting surfaces for dynamic comparative visualization

NARCIS (Netherlands)

Busking, S.; Botha, C.P.; Ferrarini, L.; Milles, J.; Post, F.H.

2010-01-01

Nested or intersecting surfaces are proven techniques for visualizing shape differences between static 3D objects (Weigle and Taylor II, IEEE Visualization, Proceedings, pp. 503–510, 2005). In this paper we present an image-based formulation for these techniques that extends their use to dynamic

Trace uranium determination in beverages and mineral water using fission track techniques

International Nuclear Information System (INIS)

Cheng, Y.L.; Lin, J.Y.; Hao, X.H.

1993-01-01

The uranium contents of beverages and mineral water have been estimated using the technique of fission track analysis with polycarbonate detector. The U contents in beverages have been found to vary from 0.26 ± 0.03 to 1.65 ± 0.07 ppb, the average value is 0.93 ± 0.05 ppb. The mean U content in mineral water is 9.20 ± 0.16 ppb, which is ∼ 10 times higher than the mean U content of beverages. The present study shows the high U content in mineral water, indicating need for further investigation of U content in mineral water for the studies of radiation health hazards. (Author)

Complex Road Intersection Modelling Based on Low-Frequency GPS Track Data

Science.gov (United States)

Huang, J.; Deng, M.; Zhang, Y.; Liu, H.

2017-09-01

It is widely accepted that digital map becomes an indispensable guide for human daily traveling. Traditional road network maps are produced in the time-consuming and labour-intensive ways, such as digitizing printed maps and extraction from remote sensing images. At present, a large number of GPS trajectory data collected by floating vehicles makes it a reality to extract high-detailed and up-to-date road network information. Road intersections are often accident-prone areas and very critical to route planning and the connectivity of road networks is mainly determined by the topological geometry of road intersections. A few studies paid attention on detecting complex road intersections and mining the attached traffic information (e.g., connectivity, topology and turning restriction) from massive GPS traces. To the authors' knowledge, recent studies mainly used high frequency (1 s sampling rate) trajectory data to detect the crossroads regions or extract rough intersection models. It is still difficult to make use of low frequency (20-100 s) and easily available trajectory data to modelling complex road intersections geometrically and semantically. The paper thus attempts to construct precise models for complex road intersection by using low frequency GPS traces. We propose to firstly extract the complex road intersections by a LCSS-based (Longest Common Subsequence) trajectory clustering method, then delineate the geometry shapes of complex road intersections by a K-segment principle curve algorithm, and finally infer the traffic constraint rules inside the complex intersections.

Fission studies of gold induced by (1665 MeV) π- using a CR-39 detector

International Nuclear Information System (INIS)

Muhammad Ikram Shahzad; Yasin, Zafar; Sher, Gul

2012-01-01

The fission cross section and fission probability of 197 Au, induced by (1665 MeV) π'-, have been studied using CR-39 track detectors. A 4π-geometry was used to count track statistics. A beam of negative pions of 1665 MeV was produced at AGS of Brookhaven National Laboratory, USA, and allowed to fall normally on the stack. Two detectors from the stack were scanned for fission fragment tracks after etching in 6N NaOH at 70 ℃. The statistics of fission fragment tracks in both detectors were obtained. It was found that there was a marked asymmetry of registered tracks with respect to the forward and backward hemispheres. This asymmetry could be partly accounted for on the basis of momentum transfer to the struck nucleus. On the basis of counting statistics fission cross section was measured, and fission probability was determined by dividing the fission cross section with the reaction cross section. The fission cross-section and fission probability were compared with the computed values using the cascade-exciton model code CEM95. (authors)

Dating by fission track method: study of neutron dosimetry with natural uranium thin films; Datacao com o metodo dos tracos de fissao: estudo da dosimetria de neutrons com filmes finos de uranio natural

Energy Technology Data Exchange (ETDEWEB)

Iunes, P J

1990-06-01

Fission track dating is described, focalizing the problem of the decay constant for spontaneous fission of {sup 238} U and the use of neutron dosimetry in fission track analysis. Experimental procedures using thin films of natural uranium as neutron dosimeters and its results are presented. The author shows a intercomparison between different thin films and between the dosimetry with thin film and other dosimetries. (M.V.M.). 52 refs, 12 figs, 9 tabs.

Mesozoic-Cenozoic tectonic evolution and its relation to sandstone-type uranium mineralization in northern Tarim area--Evidence from apatite fission track

International Nuclear Information System (INIS)

Liu Hongxu; Dong Wenming; Liu Zhangyue; Chen Xiaolin

2009-01-01

The apatite fission track dating and inversion result of geological thermal history of four rock specimens from Sawafuqi area and Talike area in northern Tarim Basin show that two areas uplifted at different ages. The apatite fission track ages of Sawafuqi range from 3.5 to 3.9 Ma, while the ages of Talike range from 53 to 59 Ma. The thermal history recorded by rock samples reveals that there are at least three prominent cooling phases since Late Cretaceous epoch. Detailed study was made on the division of uplifting stages during Mesozoic and Cenozoic tectonic evolution with the existing data in northern Tarim area. And new ideas on tectonic evolution and sandstone-type uranium mineralization have been put forward by combining with the sandstone-type uranium mineralization ages in this area.(authors)

On the use of thin natural uranium film dosimetry in mineral dating by the fission track method

International Nuclear Information System (INIS)

Hadler Neto, J.C.; Iunes, P.J.; Khouri, M.C.

1993-01-01

Three obsidian samples were irradiated in a neutron facility and their age was measured by the fission track method; using a thin uranium film dosemeter. The results were compared to others made previously on the same type of rock using conventional neutron dosimetry. The use of thin uranium film for age determination is discussed. (F.E.). 20 refs, 4 tabs

Reconstructing Post-Carboniferous History of the Krkonoše Piedmont Basin Using Detrital Apatite Fission-Track Data

Czech Academy of Sciences Publication Activity Database

Martínek, K.; Svojtka, Martin; Filip, Jiří

2006-01-01

Roč. 20, - (2006), s. 91-92 ISSN 1210-9606. [Meeting of the Central European Tectonic Studies Group /4./. Zakopane, 19.04.2006-22.04.2006] Institutional research plan: CEZ:AV0Z30130516 Keywords : fission-track * Krkonoše * apatite Subject RIV: DB - Geology ; Mineralogy http://geolines.gli.cas.cz/fileadmin/volumes/volume20/G20-091b.pdf

Determination of the uranium concentration in samples of raw, retorted and spent shale from Irati, Parana-Brazil, by the fission track registration technique

International Nuclear Information System (INIS)

Cabral, R.G.

1981-02-01

The feasibility of the determination of uranium in oil shale, by the fission track registration technique is studied. The wet and dry methods were employed, using a Bayer policarbonate, Makrofol KG, as detector. It was created a new variant of the dry method. The fission track registration technique was used in samples of raw, retorted and spent shale from Irati, Parana in Brazil, 16 μg U/g, 20 μg U/g and 20μg U/g were found, respectively, with a total error ranging from 19% to 20%. Some experimental results were included for illustration and comparison. The feasibility of the determination of uranium in oil shale from Irati was verified. (Author) [pt

Modelling how drivers respond to a bicyclist crossing their path at an intersection: How do test track and driving simulator compare?

Science.gov (United States)

Boda, Christian-Nils; Dozza, Marco; Bohman, Katarina; Thalya, Prateek; Larsson, Annika; Lubbe, Nils

2018-02-01

Bicyclist fatalities are a great concern in the European Union. Most of them are due to crashes between motorized vehicles and bicyclists at unsignalised intersections. Different countermeasures are currently being developed and implemented in order to save lives. One type of countermeasure, active safety systems, requires a deep understanding of driver behaviour to be effective without being annoying. The current study provides new knowledge about driver behaviour which can inform assessment programmes for active safety systems such as Euro NCAP. This study investigated how drivers responded to bicyclists crossing their path at an intersection. The influences of car speed and cyclist speed on the driver response process were assessed for three different crossing configurations. The same experimental protocol was tested in a fixed-base driving simulator and on a test track. A virtual model of the test track was used in the driving simulator to keep the protocol as consistent as possible across testing environments. Results show that neither car speed nor bicycle speed directly influenced the response process. The crossing configuration did not directly influence the braking response process either, but it did influence the strategy chosen by the drivers to approach the intersection. The point in time when the bicycle became visible (which depended on the car speed, the bicycle speed, and the crossing configuration) and the crossing configuration alone had the largest effects on the driver response process. Dissimilarities between test-track and driving-simulator studies were found; however, there were also interesting similarities, especially in relation to the driver braking behaviour. Drivers followed the same strategy to initiate braking, independent of the test environment. On the other hand, the test environment affected participants' strategies for releasing the gas pedal and regulating deceleration. Finally, a mathematical model, based on both experiments

Trace uranium analysis in Indian coal samples using the fission track technique

International Nuclear Information System (INIS)

Jojo, P.J.; Rawat, A.; Kumar, Ashavani; Prasad, Rajendra

1993-01-01

The ever-growing demand for energy has resulted in the extensive use of fossil fuels, especially coal, for power generation. Coal and its by-products often contain significant amounts of radionuclides, including uranium, which is the ultimate source of the radioactive gas Radon-222. The present study gives the concentration of uranium in coal samples of different collieries in India, collected from various thermal power plants in the state of Uttar Pradesh. The estimates were made using the fission track technique. Latent damage tracks were not found to be uniformly distributed but showed sun bursts and clusters. Non-uniform distributions of trace elements are a very common phenomenon in rocks. The levels of uranium in the coal samples were found to vary from 2.0 to 4.9 ppm in uniform distributions and from 21.3 to 41.0 ppm in non-uniform distributions. Measurements were also made on fly ash samples where the average uranium concentration was found to be 8.4 and 49.3 ppm in uniform and non-uniform distributions, respectively. (author)

Sequential fission process observed in the reaction (16.7 MeV/u) 238U + nat.Au using mica as dielectric track detector

International Nuclear Information System (INIS)

Shahzad, Muhammad Ikram; Qureshi, Imtinan Elahi; Manzoor, Shahid; Khan, Hameed Ahmed

1999-01-01

The evidence of sequential fission has been found in the heavy-ion reaction (16.7 MeV/u) 238 U + nat. Au, using muscovite mica as Dielectric Track Detector (DTD) placed in a 2π-geometry configuration. The reaction products originating from the interactions of 238 U ions with the atoms of gold were registered in the detector in the form of tracks and identified for performing a detailed kinematical analysis. For this purpose the spherical polar coordinates of the correlated tracks of the multipronged events have been analyzed on an event-by-event basis. Automatic, semi-automatic and manual measuring methods have been employed to collect and manipulate the track data. The known characteristics of binary and ternary events observed in the reaction have been used for the calibration of the detectors. The computed masses, Q-values and relative velocities of the reaction products determined in this analysis are compared with theoretical predictions based on sequential fission process. Agreement within one standard deviation with respect to the experimental values has been found for the majority of analyzed events. Therefore, it is concluded that three particles in the exit channel of the reaction are produced in two successive steps. In the first step of the reaction, two intermediate nuclei are formed as a result of an inelastic collision between projectile and target atoms while in the second step the fission of one of the intermediate nuclei of the previous step takes place. Furthermore no proximity effects have been observed

Fission-track dating of pumice from the KBS Tuff, East Rudolf, Kenya

Science.gov (United States)

Hurford, A.J.; Gleadow, A.J.W.; Naeser, C.W.

1976-01-01

Fission-track dating of zircon separated from two pumice samples from the KBS Tuff in the Koobi Fora Formation, in Area 131, East Rudolf, Kenya, gives an age of 2.44??0.08 Myr for the eruption of the pumice. This result is compatible with the previously published K-Ar and 40Ar/ 39Ar age spectrum estimate of 2.61??0.26 Myr for the KBS Tuff in Area 105, but differs from the more recently published K-Ar date of 1.82??0.04 Myr for the KBS Tuff in Area 131. This study does not support the suggestion that pumice cobbles of different ages occur in the KBS Tuff. ?? 1976 Nature Publishing Group.

Application of fission track method in the development study of coalbed methane

International Nuclear Information System (INIS)

Li Xiaoming; Peng Gelin

2002-01-01

In order to explore potential resource of coalbed methane in Xinji coal deposit of Huainan coalfield, its tectonic-thermal evolution history was studied by using fission track technique. The results showed that there had been 3 or more times of significant thermal events occurred in this area since the late Paleozoic Era. The paleo-geothermal gradient was higher than that of the present. It was estimated that the denudation thickness in this area should be over 2000 m. Mainly formed between 240-140 Ma, no abundant methane could be generated in such condition. Furthermore, the tectonic-thermal events would release the most of methane gases. So, the potential resource of the coalbed methane in this are might be limited

Apatite fission track analysis for revealing tectonic events of the Bayinguole area in the west section of Eastern Kunlun Mountains, northern Qinghai-Tibet Plateau

International Nuclear Information System (INIS)

Chen Xiaoning; Yuan Wanming; Hao Nana; Duan Hongwei; Feng Yunlei; Zhang Aikui

2014-01-01

Background: Qimantage is an important tectonic metallogenic belt in western part of East Kunlun Mountain. It has experienced complex geological evolution, and significant mineralization. However, because of the plateau climate and inaccessibility, fewer research works have been done on this area, especially after Indo-sinian epoch. Purpose: Our work is to research tectonic activity, thermal history and uplifting around Bayinguole river in Qimantage belt. Methods: The apatite fission-track method was applied to research the tectonic setting, simulate the thermal history and calculate the uplift size and uplift speed. Results: A series of apatite fission track ages from granitoid samples in Bayinguole area of Eastern Kunlun Mountain were obtained, ranging from 120 Ma to 47 Ma that might be divided into three groups': 120-100 Ma, 67 Ma and 54-47 Ma. These ages reflected tectonic events in this area very well. Conclusions: The 120-100 Ma and 67 Ma ages present collision-convergences of Gangdese terrane and Himalayan terrane with their north-side terranes in Early Cretaceous and Late Cretaceous respectively. The ages of 54-47 Ma reflect post-orogenic stretching events in Eocene. Three stages of thermal evolution history are revealed by apatite fission track modeling in this area. Stage one 180-140 Ma is in the bottom temperature of apatite fission track anneal zone. Stage two 140-13 Ma records slow cooling. The last stage after 13 Ma records rapid cooling with temperature dropped 50℃. The uplifting ranges for these three stages are 1.0 km, 0.6 km and 1.4 km, respectively. The cumulative amount of uplift is about 3.0 km. The formula calculations for the 3 samples have their rock uplifts of 3623 m, 3317 m and 3769 m, respectively, averaging 3570 m, in accordance with the results based on the 3 stage thermal history. (authors)

Calculation of high-dimensional fission-fusion potential-energy surfaces in the SHE region

International Nuclear Information System (INIS)

Moeller, Peter; Sierk, Arnold J.; Ichikawa, Takatoshi; Iwamoto, Akira

2004-01-01

We calculate in a macroscopic-microscopic model fission-fusion potential-energy surfaces relevant to the analysis of heavy-ion reactions employed to form heavy-element evaporation residues. We study these multidimensional potential-energy surfaces both inside and outside the touching point.Inside the point of contact we define the potential on a multi-million-point grid in 5D deformation space where elongation, merging projectile and target spheroidal shapes, neck radius and projectile/target mass asymmetry are independent shape variables. The same deformation space and the corresponding potential-energy surface also describe the shape evolution from the nuclear ground-state to separating fragments in fission, and the fast-fission trajectories in incomplete fusion.For separated nuclei we study the macroscopic-microscopic potential energy, that is the ''collision surface'' between a spheroidally deformed target and a spheroidally deformed projectile as a function of three coordinates which are: the relative location of the projectile center-of-mass with respect to the target center-of-mass and the spheroidal deformations of the target and the projectile. We limit our study to the most favorable relative positions of target and projectile, namely that the symmetry axes of the target and projectile are collinear

Measurement of the 235U/238U fission cross section ratio in the 235U fission neutron spectrum

International Nuclear Information System (INIS)

Azimi-Garakani, D.; Bagheri-Darbandi, M.

1983-06-01

Fission cross section ratio of 235 U to 238 U has been measured in the fast neutron field generated by the 235 U fission plate installed on the thermal column of the Tehran Research Reactor (TRR) with a Makrofol solid state nuclear track detector. The experiments were carried out with a set of total six enriched 235 U and depleted 238 U deposits with different masses and Makrofol films of 0.025mm and 0.060mm thicknesses. The chemically etched tracks were counted by an optical microscope. No significant differences were observed with the thin and the thick films. The results showed that the average fission cross section ratio is 3.83+-0.25. (author)

Determination of the uranium content in phosphate fertilizers by the fission track registration technique

International Nuclear Information System (INIS)

Rocha, A.C.S. da.

1983-01-01

The application of fission track registration technique (SSNTD) to determine the uranium contents in phosphate fertilizers is dealt with. Samples were prepared by the wet method and the detector used was Makrofol Kg 10μm thick. The determination of uranium in phosphate fertilizer industry is of considerable interest in environmental control. The roots of vegetables tend to absorb and accumulate uranium form soil and so the human body could be contaminated. The phosphate fertilizers were originated from the phosphate-rich apatite deposits located in the high naturally radioactive areas of Araxa and Tapira in the state of Minas Gerais, Brazil. The results obtained ranged from 11.1 to 100ppm of uranium with a total error from 8.2 to 15.7%. The thorium contributions to the total track counting were discounted, though the actual concentrations of thorium in the samples were not determined. (Author) [pt

Exhumation of Basement-cored Uplifts: Example of the Kyrgyz Range Quantified with Apatite Fission-track Thermochronology

Science.gov (United States)

Sobel, Edward R.; Oskin, Michael; Burbank, Douglas; Mikolaichuk, Alexander

2005-01-01

The Kyrgyz Range, the northernmost portion of the Kyrgyzstan Tien Shan, displays topographic evidence for lateral propagation of surface uplift and exhumation. The highest and most deeply dissected segment lies in the center of the range. To the east, topography and relief decrease, and preserved remnants of a Cretaceous regional erosion surface imply minimal amounts of bedrock exhumation. The timing of exhumation of range segments defines the lateral propagation rate of the range-bounding reverse fault and quantifies the time and erosion depth needed to transform a mountain range from a juvenile to a mature morphology. New apatite fission-track (AFT) data from three transects from the eastern Kyrgyz Range, combined with published AFT data, demonstrate that the range has propagated over 110 km eastwards over the last 7-11 Myr. Based on the thermal and topographic evolutionary history, we present a model for a time-varying exhumation rate driven by rock uplift and changes in erodability and the time scale of geomorphic adjustment to surface uplift. Easily eroded, Cenozoic sedimentary rocks overlying resistant basement control early, rapid exhumation and slow surface upliftrates. As increasing amounts of resistant basement are exposed, exhumation rates decrease while surface uplift rates are sustained or increase, thereby growing topography. As the range becomes high enough to cause ice accumulation and develop steep river valleys, fluvial and glacial erosion become more powerful and exhumation rates once again increase. Independently determined range-noma1 shortening rates have also varied over time, suggesting a feedback between erosional efficiency and shortening rate.

Device for glass detector tracks processing

International Nuclear Information System (INIS)

Zhukov, A.V.; Mikheev, V.P.; Pis'mennyj, G.V.; Pribytov, V.I.; Rozov, B.S.

1974-01-01

The authors describe a semi-automatic installation for measuring angular distribution of tracks from nuclear fission fragments. The measurements were performed on glass detectors represented by a cylinder surface section with central angle 110-120 deg, height 20 mm and radius 45 mm. The tracks were in the form of lunes, 10/25 mm deep. Treatment of one detector lasted 10-15 min. The installation affords the possibility of finding the angular distribution of tracks by counting them in zones, whose sizes may vary from 1 to 90 deg. Data output was performed on a digitizer [ru

Why tracks

International Nuclear Information System (INIS)

Burchart, J.; Kral, J.

1979-01-01

A comparison is made of two methods of determining the age of rocks, ie., the krypton-argon method and the fission tracks method. The former method is more accurate but is dependent on the temperature and on the grain size of the investigated rocks (apatites, biotites, muscovites). As for the method of fission tracks, the determination is not dependent on grain size. This method allows dating and the determination of uranium concentration and distribution in rocks. (H.S.)

Mass dependence of positive pion-induced fission

International Nuclear Information System (INIS)

Khan, H.A.; Khan, N.A.; Peterson, R.J.

1991-01-01

Fission cross sections for a range of targets have been measured by solid-state track detectors following 80 and 100 MeV π + bombardment. Fission probabilities have been inferred by comparison to computed reaction cross sections. Fission probabilities for heavy targets agree with those for other probes of comparable energy and with statistical calculations. Probabilities for lighter targets are much above those previously observed or computed. Ternary fission cross sections and multiplicities of light fragments have also been determined

Multiple cooling episodes in the Central Tarim (Northwest China) revealed by apatite fission track analysis and vitrinite reflectance data

Science.gov (United States)

Chang, Jian; Qiu, Nansheng; Song, Xinying; Li, Huili

2016-06-01

Apatite fission track and vitrinite reflectance are integrated for the first time to study the cooling history in the Central Tarim, northwest China. The paleo-temperature profiles from vitrinite reflectance data of the Z1 and Z11 wells showed a linear relationship with depth, suggesting an approximately 24.8 °C/km paleo-geothermal gradient and 2700-3900 m of erosion during the Early Mesozoic. The measured apatite fission track ages from well Z2 in the Central Tarim range from 39 to 159 Ma and effectively record the Meso-Cenozoic cooling events that occurred in Central Tarim. Moreover, two cooling events at 190-140 Ma in the Early Jurassic-Early Cretaceous and 80-45 Ma in the Late Cretaceous-Paleocene revealed by measured AFT data and thermal modeling results are related to the collisions of the Qiangtang-Lhasa terranes and the Greater India Plate with the southern margin of the Eurasian Plate, respectively. This study provides new insights into the tectonic evolution of the Tarim Basin (and more broadly Central Asia) and for hydrocarbon generation and exploration in the Central Tarim.

$\\bar{p}$-Induced Fission Studies with Plastic Track Detectors Using 4$\\pi$-Geometry

CERN Multimedia

2002-01-01

% EMU20 \\\\ \\\\ The annihilation of a stopped antiproton on the surface of a target nucleus produces on the average five pions with a mean energy of 230~MeV. The high excitation of the nuclei with low angular momentum transfer can also be achieved by direct pion-nucleus interactions. The fission probabilities of highly excited nuclei can be explained on the basis of high energy limit of statistical theory. Previously the binary fission and higher multiplicity break-up of various nuclei caused by the absorption of pions has been studied by our group. The mechanism of nuclear excitation may still be the same when an antiproton annihilates in a nucleus and produces pions. It would be interesting to see whether the $\\bar{p}$ annihilation produces high enough excitation energies for nuclear phase-transition to take place. If so, then the fragmentation would overwhelm binary and ternary fission process. \\\\ \\\\The use of a highly sensitive plastic detector, CR-39, was made by our group in a number of studies involving ...

Denudation and uplift of the Mawson Escarpment (eastern Lambert Graben, Antarctica) as indicated by apatite fission track data and geomorphological observation

Science.gov (United States)

Lisker, F.; Gibson, H.; Wilson, C.J.; Läufer, A.

2007-01-01

Analysis of three vertical profiles from the southern Mawson Escarpment (Lambert Graben) reveals apatite fission track (AFT) ages ranging from 102±20 to 287±23 Ma and mean lengths of 12.2 to 13.0 μm. Quantitative thermal histories derived from these data consistently indicate onset of slow cooling below 110°C began sometime prior to 300 Ma, and a second stage of rapid cooling from paleotemperatures up to ≤100°C to surface temperatures occurred in the Late Cretaceous – Paleocene. The first cooling phase refers to Carboniferous – Jurassic basement denudation up to 5 km associated with the initial rifting of the Lambert Graben. The presence of the ancient East Antarctic Erosion Surface and rapid Late Cretaceous – Paleocene cooling indicate a second denudational episode during which up to 4.5 km of sedimentary cover rocks were removed, and that is likely linked to the Cretaceous Gondwana breakup between Antarctica and India and subsequent passive continental margin formation.

Application of fission track technique for estimation of uranium concentration in drinking waters of Punjab

International Nuclear Information System (INIS)

Prabhu, S.P.; Sawant, P.D.; Raj, S.S.; Kumar, A.; Sarkar, P.K.; Tripathi, R.M.

2012-01-01

Drinking water samples were collected from four different districts, namely Bhatinda, Mansa, Faridkot and Firozpur, of Punjab for ascertaining the U(nat.) concentrations. All samples were preserved, processed and analyzed by laser fluorimetry (LF). To ensure accuracy of the data obtained by LF, few samples (10 nos) from each district were analyzed by alpha spectrometry as well as by fission track analysis (FTA) technique. For FTA technique few μl of water sample was transferred to polythene tube, lexan detector was immersed in it and the other end of the tube was also heat-sealed. Two samples and one uranium standard were irradiated in DHRUVA reactor. Irradiated detectors were chemically etched and tracks counted using an optical microscope. Uranium concentrations in samples ranged from 3.2 to 60.5 ppb and were comparable with those observed by LF. (author)

Efficiency of a concentric matrix track detector surface scanning

International Nuclear Information System (INIS)

Bek-Uzarov, Dj.; Nikezic, D.; Kostic, D.; Krstic, D.; Cuknic, O.

1995-01-01

Heavy particle ionizing radiation track counting on the surface of a solid state round surface detector is made using the microscope and scanning step by step by a round field of vision. The whole solid state detector surface could not be fully or completely covered by round fields of visions. Therefore detector surface could be divided on the two parts, the larger surface, being under fields of vision, really scanned and no scanned missed or omitted surface. The ratio between omitted and scanned surfaces is so called track scanning efficiency. The knowledge of really counted, or scanned surface is a important value for evaluating the real surface track density an exposed solid state track detector. In the paper a matrix of a concentric field of vision made around the first microscope field of vision placed in center of the round disc of the scanned track detector is proposed. In a such scanning matrix the real scanned surface could be easy calculated and by the microscope scanning made as well. By this way scanned surface is very precisely obtained as well. Precise knowledge of scanned and omitted surface allows to obtain more precise scanning efficiency factor as well as real surface track density, the main parameter in solid state track detection measurements. (author)

Unstable isotopes in a stable landscape?- Untangling Southern Africa's geological history with fission tracks and cosmogenic nuclides

International Nuclear Information System (INIS)

Belton, D.; Brown, R.; Fink, D.

1998-01-01

Full text: In the absence of direct evidence for burial and subsequent exposure of the land surface in the interior of Africa, researchers have argued for surface ages of several hundred million years. The proposition that landforms may have persisted at the surface for these extensive periods of time has a number of important implications. It suggests that the processes of tectonics and geomorphic evolution have been essentially absent for a period of up to 500 Ma. As a consequence, the persistence of these landscapes would require extremely low rates of weathering and erosion. Although this view of continental evolution has been widely held for several decades, recent studies suggest that continental interiors in Africa, Australia, Brazil and north America, have been subject to denudation in the order of several kilometres during the last 60 Ma. This study applies the complimentary techniques of apatite fission track and cosmogenic nuclide analysis, in an effort to measure both the long-term crustal-scale denudation and the short-term erosion rates, of which denudation is a function. We present preliminary data from the Zimbabwe Craton that illustrates the utility of such techniques in addressing both local and regional geological questions. The study provides a detailed picture of complex tectonic responses as well as large scale denudation over extended periods of time

Sequential fission process observed in the reaction (16.7 MeV/u) {sup 238}U + {sup nat.}Au using mica as dielectric track detector

Energy Technology Data Exchange (ETDEWEB)

Shahzad, Muhammad Ikram; Qureshi, Imtinan Elahi; Manzoor, Shahid; Khan, Hameed Ahmed

1999-01-04

The evidence of sequential fission has been found in the heavy-ion reaction (16.7 MeV/u) {sup 238}U + {sup nat.}Au, using muscovite mica as Dielectric Track Detector (DTD) placed in a 2{pi}-geometry configuration. The reaction products originating from the interactions of {sup 238}U ions with the atoms of gold were registered in the detector in the form of tracks and identified for performing a detailed kinematical analysis. For this purpose the spherical polar coordinates of the correlated tracks of the multipronged events have been analyzed on an event-by-event basis. Automatic, semi-automatic and manual measuring methods have been employed to collect and manipulate the track data. The known characteristics of binary and ternary events observed in the reaction have been used for the calibration of the detectors. The computed masses, Q-values and relative velocities of the reaction products determined in this analysis are compared with theoretical predictions based on sequential fission process. Agreement within one standard deviation with respect to the experimental values has been found for the majority of analyzed events. Therefore, it is concluded that three particles in the exit channel of the reaction are produced in two successive steps. In the first step of the reaction, two intermediate nuclei are formed as a result of an inelastic collision between projectile and target atoms while in the second step the fission of one of the intermediate nuclei of the previous step takes place. Furthermore no proximity effects have been observed.

A Two-Phase Cooling Loop for Fission Surface Power Waste Heat Transport, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Current lunar-based Fission Surface Power (FSP) Systems that will support sustained surface outposts consist of a nuclear reactor with power converters, whose waste...

Thermal modeling and geomorphology of the south border of the Sao Francisco Craton: thermochronology by fission tracks in apatites;Modelagem termica e geomorfologia da borda sul do Craton do Sao Francisco: termocronologia por tracos de fissao em apatita

Energy Technology Data Exchange (ETDEWEB)

Hackspacher, Peter Christian [UNESP, Rio Claro, SP (Brazil). Inst. de Geociencias e Ciencias Exatas; Godoy, Daniel Francoso de; Franco, Ana Olivia Barufi [UNESP, Rio Claro, SP (Brazil). Pos-Graduacao em Geologia Regional; Ribeiro, Luiz Felipe Brandini [NUCLEARGEO, Rio Claro, SP (Brazil); Hadler Neto, Julio Cesar [Universidade Estadual de Campinas (IFGW/UNICAMP), SP (Brazil). Inst. de Fisica Gleb Wataghin

2007-12-15

Recent developments in Fission Track thermochronology associated to mesozoic-cenozoic erosion and tectonic presented trough thematic maps (isotemperature), permit to model the landscape evolution in the southern border of the Sao Francisco craton, southeastern Brazil. Paleotemperature, obtained by fission track analysis in apatite, is closely related to geomorphologic interpretations. The area suffered a complex imprint of endogenous and exogenous processes resulting diversified and differentiated relieves. The landscape is strongly controlled by exhumation between Jurassic and Lower Cretaceous, uplift with tectonic denudation related to crustal heating at the Upper Cretaceous and reactivation of faults until the Miocene. This scenario is a result of reactivations of different brittle structures that accommodate the deformation in the southern border of the Sao Francisco craton. The landscape reflects denudations of up to 3 km with preserved remains of erosive surfaces in the topographical tops and chronocorrelates deposits in the basins of the region. (author)

Emplacement time of Salai Patai carbonatite, Malakand, Pakistan, from fission track dating of zircon and apatite

International Nuclear Information System (INIS)

Qureshi, A.A.; Khan, H.A.

1991-01-01

Based on fission track dating of zircon and apatite, the emplacement history of Salai Patai carbonatite has been traced. It has been estimated that the carbonatite was emplaced along the thrust plane associated with the Indian-Eurasian plate collision during the Oligocene period followed by some thermal/tectonic episode during Early Miocene. This negates the previous proposal that all carbonatites found in Pakistan are a part of a 200 km long alkaline province associated with the rifting of Peshawar Valley during Late Cretaceous or early tertiary. (author)

Concentration of uranium in human cancerous tissues of Southern Iraqi patients using fission track analysis

International Nuclear Information System (INIS)

Al-Hamzawi, A.A.; Al-Qadisiyah University, Qadisiyah; Jaafar, M.S.; Tawfiq, N.F.

2015-01-01

The technique of nuclear fission track analysis with solid state nuclear track detectors CR-39 has been applied to determine concentrations of uranium in cancerous samples of human tissues that excised from patients in the three key southern Iraqi governorates namely, Basrah, Dhi-Qar, and Muthanna. These provinces were the sites of intensive military events during the Gulf Wars in 1991 and 2003. The investigation was based on the study of 24 abnormal samples and 12 normal samples for comparing the results. These samples include four types of soft tissues (kidney, breast, stomach and uterus). The results show that uranium concentrations in the normal tissues ranged between (1.42-4.76 μg kg -1 ), whereas in the cancerous tissues ranged between (3.37-7.22 μg kg -1 ). The uranium concentrations in the normal tissues were significantly lower than in the abnormal tissues (P < 0.001). (author)

Exhumation history of the NW Indian Himalaya revealed by fission track and 40Ar/39Ar ages

Science.gov (United States)

Schlup, Micha; Steck, Albrecht; Carter, Andrew; Cosca, Michael; Epard, Jean-Luc; Hunziker, Johannes

2011-01-01

New fission track and Ar/Ar geochronological data provide time constraints on the exhumation history of the Himalayan nappes in the Mandi (Beas valley) — Tso Morari transect of the NW Indian Himalaya. Results from this and previous studies suggest that the SW-directed North Himalayan nappes were emplaced by detachment from the underthrusted upper Indian crust by 55 Ma and metamorphosed by ca. 48–40 Ma. The nappe stack was subsequently exhumed to shallow upper crustal depths (

Cooling and erosion history of the Krkonoše Piedmont Basin (Bohemian Massif, Czech Republic) interpreted from apatite fission-track analysis

Czech Academy of Sciences Publication Activity Database

Svojtka, Martin; Filip, Jiří; Martínek, K.

2005-01-01

Roč. 7, - (2005), s. 4925-4926 ISSN 1607-7962. [European Geosciences Union, General Assembly. 24.04.2005-29.04.2005, Wien] R&D Projects: GA AV ČR KJB3111305 Institutional research plan: CEZ:AV0Z30130516 Keywords : Krkonoše * apatite * fission-track Subject RIV: DB - Geology ; Mineralogy

Detrital zircon fission-track thermochronology and magnetic fabric of the Amaga Formation (Colombia): Intracontinental deformation and exhumation events in the northwestern Andes

Czech Academy of Sciences Publication Activity Database

Piedrahita, V. A.; Bernet, M.; Chadima, Martin; Sierra, G. M.; Marín-Cerón, M. I.; Toro, G. E.

2017-01-01

Roč. 356, JUL 1 2017 (2017), s. 26-42 ISSN 0037-0738 Institutional support: RVO:67985831 Keywords : Panama-Choco Block * Northern Andean Block * Amaga Formation * zircon fission track * anisotropy of magnetic susceptibility Subject RIV: DB - Geology ; Mineralogy OBOR OECD: Geology Impact factor: 2.373, year: 2016

Exceptional curves on smooth rational surfaces with -K not nef and of self-intersection zero

International Nuclear Information System (INIS)

Lahyane, Mustapha

2001-08-01

We prove that a smooth rational surface X defined over the field of complex numbers having an anti-canonical divisor not nef and of self-intersection zero has a finite number of (-1)-curves. A (-1)-curve is a smooth rational curve of self-interaction -1. By giving an example, we also show that X may have no (-2)-curves, a (-2)-curve is a smooth rational curve of self-intersection -2. (author)

Zircon fission-track technique: a laboratory procedure adopted at the Institute of Geology, Academy of Sciences of the Czech Republic, v.v.i

Czech Academy of Sciences Publication Activity Database

Murakami, M.; Svojtka, Martin

2007-01-01

Roč. 20, - (2007), s. 13-19 ISSN N R&D Projects: GA MŠk 1K05030 Institutional research plan: CEZ:AV0Z30130516 Keywords : fission-track * zircon * Institute of Geology AS CR, v. v. i. Subject RIV: DB - Geology ; Mineralogy

New approaches in fission track geochronology as a tectonic tool: examples from the Transantarctic Mountains

International Nuclear Information System (INIS)

Fitzgerald, P.G.

1990-01-01

Apatite fission track analysis has been applied to study the uplift history and tectonics of the Transantarctic Mountains. An uplifted fossil apatite annealing zone has been identified in the apatite age vs elevation profile and is confirmed by track length data. A ''break in slope'' in the apatite age profile marks the base of the uplifted partial annealing zone and approximates the time of initiation of uplift of the mountains. Samples below the ''break in slope'' give information on the rate(s) of uplift. Samples above the break have apatite ages that vary significantly with elevation, but the gradient is not equal to an apparent uplift rate. Rather, it is due to inherited characteristics from the pre-existing partial annealing zone. These samples above the ''break in slope'' can be used as indicators of paleo-depth in the pre-uplift crust to determine the structure of an area and the displacement across faults. (author)

Measurement of the energy spectrum of {sup 252}Cf fission fragments using nuclear track detectors and digital image processing

Energy Technology Data Exchange (ETDEWEB)

Espinosa, G.; Golzarri, J. I. [UNAM, Instituto de Fisica, Circuito Exterior, Ciudad Universitaria, 04510 Mexico D. F. (Mexico); Castano, V. M. [UNAM, Centro de Fisica Aplicada y Tecnologia Avanzada, Boulevard Juriquilla 3001, Santiago de Queretaro, 76230 Queretaro (Mexico); Gaso, I. [ININ, Carretera Mexico-Toluca s/n, Ocoyoacac 52750, Estado de Mexico (Mexico); Mena, M.; Segovia, N. [UNAM, Instituto de Geofisica, Circuito de la Investigacion Cientifica, Ciudad Universitaria, 04510 Mexico D. F. (Mexico)

2010-02-15

The energy spectrum of {sup 252}Cf fission fragments was measured using nuclear track detectors and digital image analysis system. The detection material was fused silica glass. The detectors were chemically etched in an 8% HF solution. After experimenting with various etching time, it was found that the best resolution of the track diameter distribution was obtained after 30 minutes of etching. Both Gaussian and Lorentzian curves were fit to the track diameter distribution histograms and used to determine the basic parameters of the distribution of the light (N{sub L}) and heavy (N{sub H}) formed peaks and the minimum of the central valley (N{sub V}). Advantages of the method presented here include the fully-automated analysis process, the low cost of the nuclear track detectors and the simplicity of the nuclear track method. The distribution resolution obtained by this method is comparable with the resolution obtained by electronic analysis devices. The descriptive variables calculated were very close to those obtained by other methods based on the use of semiconductor detectors. (Author)

Provenance and post-depositional low-temperature evolution of the James Ross Basin sedimentary rocks (Antarctic Peninsula) based on fission track analysis

Czech Academy of Sciences Publication Activity Database

Svojtka, Martin; Nývlt, D.; Murakami, Masaki; Vávrová, J.; Filip, Jiří; Mixa, P.

2009-01-01

Roč. 21, č. 6 (2009), s. 593-607 ISSN 0954-1020 R&D Projects: GA MŠk 1K05030 Institutional research plan: CEZ:AV0Z30130516 Keywords : James Ross Island * Seymour Island * Cretaceous–Palaeogene succession * fission track dating * zircon * apatite Subject RIV: DB - Geology ; Mineralogy Impact factor: 1.496, year: 2009

Potentialities and practical limitations of absolute neutron dosimetry using thin films of uranium and thorium applied to the fission track dating

CERN Document Server

Bigazzi, G; Hadler-Neto, J C; Iunes, P J; Paulo, S R; Oddone, M; Osorio, A M A; Zúñiga, A G

1999-01-01

Neutron dosimetry using natural uranium and thorium thin films makes possible that mineral dating by the fission-track method can be accomplished, even when poor thermalized neutron facilities are employed. In this case, the contributions of the fissions of sup 2 sup 3 sup 5 U, sup 2 sup 3 sup 8 U and sup 2 sup 3 sup 2 Th induced by thermal, epithermal and fast neutrons to the population of tracks produced during irradiation are quantified through the combined use of natural uranium and thorium films. If the Th/U ratio of the sample is known, only one irradiation (where the sample and the films of uranium and thorium are present) is necessary to perform the dating. However, if that ratio is unknown, it can be determined through another irradiation where the mineral to be dated and both films are placed inside a cadmium box. Problems related with film manufacturing and calibration are discussed. Special attention is given to the utilization of thin films having very low uranium content. The problems faced sugg...

Neogene tectonic evolution and exhumation of the southern Ecuadorian Andes: a combined stratigraphy and fission-track approach

Science.gov (United States)

Steinmann, Michael; Hungerbühler, Dominik; Seward, Diane; Winkler, Wilfried

1999-06-01

Coastal marine and continental sedimentary facies of Middle to Late Miocene age are exposed in the Andes of southern Ecuador (Cuenca, Girón-Santa Isabel, Loja, Malacatos-Vilcabamba and Catamayo-Gonzanamá Basins). The chronostratigraphy of the basin series was established by zircon fission-track dating on a total of 120 tephra layers. Subsequently, the timing of tectonic events was estimated through the well-dated stratigraphic sequences and intervening unconformities. Sedimentation from ≈15 to 9 Ma (termed Pacific Coastal Stage) was dominantly of coastal marine type, extending over an area far greater than the present basin perimeters. It ended when a period of east-west-oriented compression at ≈9.5-8 Ma exhumed the region, and sedimentation was then restricted to smaller basins (termed Intermontane Stage). These Late Miocene continental sediments were for the first time sourced from the west in the rising Western Cordillera. Apatite fission-track analysis was applied to some of the tephras in the Cuenca Basin and also to the older (Eocene, 42-35 Ma) Quingeo Basin series in order to quantify the basin histories with respect to timing and amount of burial and later exhumation. In the Quingeo Basin burial of the oldest sediments reached temperatures of ˜100°C at 18 Ma, when they started to cool down during a period of exhumation. This process preceded the Pacific Coastal Stage development of the other basins. In the Cuenca Basin, the oldest sediments were buried to temperatures of ca. 120°C by 9 Ma, when a period of inversion began and a phase of erosion was dominant. This timing correlates well with that estimated from structural evidence. At ca. 6 Ma the cooling rate slowed down and maybe even reverted to a small increase in temperature until 3 Ma, when the final stages of exhumation took place. Assuming a geothermal gradient of 35°C/km, total uplift for this part for Ecuador is about 6100 m over the last 9 million years. Assuming a steady state

Fission Surface Power System Initial Concept Definition

Science.gov (United States)

2010-01-01

Under the NASA Exploration Technology Development Program (ETDP) and in partnership with the Department of Energy (DOE), NASA has embarked on a project to develop Fission Surface Power (FSP) technology. The primary goals of the project are to 1) develop FSP concepts that meet expected surface power requirements at reasonable cost with added benefits over other options, 2) establish a hardwarebased technical foundation for FSP design concepts and reduce overall development risk, 3) reduce the cost uncertainties for FSP and establish greater credibility for flight system cost estimates, and 4) generate the key products to allow NASA decision-makers to consider FSP as a preferred option for flight development. The FSP project was initiated in 2006 as the Prometheus Program and the Jupiter Icy Moons Orbiter (JIMO) mission were phased-out. As a first step, NASA Headquarters commissioned the Affordable Fission Surface Power System Study to evaluate the potential for an affordable FSP development approach. With a cost-effective FSP strategy identified, the FSP team evaluated design options and selected a Preliminary Reference Concept to guide technology development. Since then, the FSP Preliminary Reference Concept has served as a point-of-departure for several NASA mission architecture studies examining the use of nuclear power and has provided the foundation for a series of "Pathfinder" hardware tests. The long-term technology goal is a Technology Demonstration Unit (TDU) integrated system test using full-scale components and a non-nuclear reactor simulator. The FSP team consists of Glenn Research Center (GRC), Marshall Space Flight Center (MSFC) and the DOE National Laboratories at Los Alamos (LANL), Idaho (INL), Oak Ridge (ORNL), and Sandia (SNL). The project is organized into two main elements: Concept Definition and Risk Reduction. Under Concept Definition, the team performs trade studies, develops analytical tools, and formulates system concepts. Under Risk

Fission cross section measurements for minor actinides

Energy Technology Data Exchange (ETDEWEB)

Fursov, B. [IPPE, Obninsk (Russian Federation)

1997-03-01

The main task of this work is the measurement of fast neutron induced fission cross section for minor actinides of {sup 238}Pu, {sup 242m}Am, {sup 243,244,245,246,247,248}Cm. The task of the work is to increase the accuracy of data in MeV energy region. Basic experimental method, fissile samples, fission detectors and electronics, track detectors, alpha counting, neutron generation, fission rate measurement, corrections to the data and error analysis are presented in this paper. (author)

Uranium distribution and age pattern of some deep-sea basalts from the Entrecasteaux area, South-western Pacific: a fission-track analysis

International Nuclear Information System (INIS)

Selo, M.; Storzer, D.

1981-01-01

The eight glass samples analysed by means of the fission-track method were recovered from deep-sea dredge sites 314D, 316D, 323D and 325D in the SW Pacific. The bulk uranium contents of the fresh remnants of unweathered glasses range between 51 ppb and 108 ppb. One glass from site 316D with a U-content of 227 ppb might be part of a dike intrusion. The basalts from all four sites are altered to various extents. Ambient temperatures prevailing during these alteration processes are estimated to have been 1 to 5 0 C at sites 314D and 325D; about 10 0 C at site 323D; but 40 to 110 0 C at site 316D. The measured fission-track ages of sites 314D, 323D and 325D scatter between 34 Ma in the north and 20 Ma in the south. At site 316D, they are exceedingly low, being from 4.4 to =< 0.7 Ma. All these ages are thermally lowered and required correction. The ages corrected for thermally induced partial track-loss are given. From these ages and the site positions, a spreading rate is deduced for the northern part of the North Loyalty Plateau, which comes close to values estimated for slow-spreading ridges. (author)

Determination of trace uranium in atmospheric precipitation of the Xiangjiang river valley by fission track method

International Nuclear Information System (INIS)

Zhai Pengji; Kang Tiesheng

1986-01-01

In this work the uranium contents in atmospheric precipitations in the region of the Xiangjiang River valley have been measured by fission track method, which range from 0.008 to 1.5 ppb. The majority of them are below 0.1 ppb. The uranium contents in the samples form different geographical positions are obviously different. Sometimes the differences in uranium contents of the samples from the same area collected at different times are also great. A preliminary discussion is given on the sources of uranium in atmospheric precipitation and on the reason of the difference in contents

Mapping of uranium and thorium in radioactive rocks using nuclear track solid detectors

International Nuclear Information System (INIS)

Bouch, C.M.

1982-01-01

α-Autoradiography and studies of induced fission in a research nuclear reactor (IEA-R1, IPEN, Sao Paulo) were done, employing Solid-State Nuclear Track detectors, in order to study the distribution of α-emitters, U and Th in rocks. Polished sections of rocks were prepared and photographed. Etching conditions were studied in order to adapt the detectors to the studies of microdistribution and macrodistribution of tracks. Polycarbonate foils (Bayer, Makrofol) were chosen as fission-fragments detectors and the technique of fission induced with reactor neutrons to obtain the distribution of U and Th were studied. Uranium and thorium standards evaporated on the surface of the detectors, as well as thorite and uraninite grains, were irradiated in order to measure the integrated flux of neutrons, the effective cross sections for fission with reactor neutrons for 232 Th(0,05b) and 238 U(0,30b) and to study the contribution of 238 U fission in thorium mapping. A technique for determination of uranium and thorium in minerals was studied and applied to Mica, for which were determined the contents of 4,2 ppb U e 58 ppb Th. (Author) [pt

Long-term landscape evolution of the South Atlantic "passive" continental margin in Eastern Argentina using apatite fission-track thermochronology

Science.gov (United States)

Pfister, Sabrina; Kollenz, Sebastian; Glasmacher, Ulrich A.

2015-04-01

To understand the evolution of the "passive" continental margin in Argentina low temperature thermochronology is an appropriate method, which might lead to new insights in this area. The Tandilia System, also called Sierras Septentrionales, is located south of the Río de la Plato Craton in eastern Argentina in the state of Buenos Aires. North of the hills the Salado basin is located whereas the Claromecó basin is situated south of the mountain range. In contrary to most basins along the South American "passive" continental margin, the Tandilia-System and the neighbouring basins trend perpendicular to the coast line. The topography is fairly flat with altitudes up to 350 m. The igneous-metamorphic basement is pre-Proterozoic in age and build up of mainly granitic-tonalitic gneisses, migmatites, amphibolites, some ultramafic rocks and granitoid plutons. It is overlain by a series of Neoproterozoic to early Paleozoic sedimentary rocks (Cingolani 2011), like siliciclastic rocks, dolostones, shales and limestones (Demoulin 2005). The aim of the study is to quantify the long-term landscape evolution of the "passive" continental margin in eastern Argentina in terms of thermal, exhumation and tectonic evolution. For that purpose, samples were taken from the basement of the Sierra Septentrionales and analyzed with the apatite fission-track method. Further 2-D thermokinematic modeling was conducted with the computer code HeFTy (Ketcham 2005; Ketcham 2007; Ketcham et al. 2009). Because there are different hypotheses in literature regarding the geological evolution of this area two different models were generated, one after Demoulin et al. (2005) and another after Zalba et al.(2007). All samples were taken from the Neoproterozoic igneous-metamorphic basement. Apatite fission-track ages range from 101.6 (9.4) to 228.9 (22.3) Ma, and, therefore, are younger than their formation age, indicating all samples have been thermally reset. Six samples accomplished enough confined

Multiphase cooling and exhumation of the Krkonoše Piedmont Basin during Mesozoic - Cenozoic basin inversion based on apatite fission track analysis

Czech Academy of Sciences Publication Activity Database

Martínek, K.; Svojtka, Martin; Filip, Jiří

2008-01-01

Roč. 34, 4/6 (2008), s. 1353003-1353003 ISSN 0161-6951. [International Geological Congress /33./. 06.08.2008-14.08.2008, Oslo] R&D Projects: GA AV ČR KJB3111305 Institutional research plan: CEZ:AV0Z30130516 Keywords : fission track * apatite * Krkonoše Piedmont basin Subject RIV: DB - Geology ; Mineralogy

30 CFR 57.7055 - Intersecting holes.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Intersecting holes. 57.7055 Section 57.7055... Jet Piercing Drilling-Surface and Underground § 57.7055 Intersecting holes. Holes shall not be drilled where there is a danger of intersecting a misfired hole or a hole containing explosives, blasting agents...

A study of commercially-available polyethylene terephthalate (PET) and polycarbonate as nuclear track detector materials

Science.gov (United States)

Espinosa, G.; Golzarri, J. I.; Vazquez-Lopez, C.; Trejo, R.; Lopez, K.; Rickards, J.

2014-07-01

In the study of the sensitivity of materials to be used as nuclear track detectors, it was found that commercial polyethylene terephthalate (PET) from Ciel® water bottles, commercial roof cover polycarbonate, and recycled packaging strips (recycled PET), can be used as nuclear track detectors. These three commercial materials present nuclear tracks when bombarded by 2.27 MeV nitrogen ions produced in a Pelletron particle accelerator, and by fission fragments from a 252Cf source (79.4 and 103.8 MeV), after a chemical etching with a 6.25M KOH solution, or with a 6.25M KOH solution with 20% methanol, both solutions at 60±1°C. As an example, the nitrogen ions deposit approximately 1 keV/nm in the form of ionization and excitation at the surface of PET, as calculated using the SRIM code. The fission fragments deposit up to 9 keV/nm at the surface, in both cases generating sufficient free radicals to initiate the track formation process. However, 5 MeV alpha particles, typical of radon (222Rn) emissions, deposit only 0.12 keV/nm, do not present tracks after the chemical etching process. This valuable information could be very useful for further studies of new materials in nuclear track methodology.

Tracking of fission products release during refueling operations

International Nuclear Information System (INIS)

Agarwal, Sharad; Prajapat, M.K.; Vyas, Shyam; Hussain, S.A.

2001-01-01

It has been always observed that the release of fission products increase during refueling operations. At RAPP-3 and 4 an attempt has been made to follow-up the change in fission products activity release at each stage of refueling operation and quantification of concentrations of various radionuclides. This exercise was also extended to refueling operation of the channels containing suspected failed fuel. A level of FPNG ( 133 Xe) was observed to increase by a factor of about 10-40 during refueling of failed channel as compared to healthy channel. It can be concluded that by monitoring FPNG levels in exhaust status of the healthiness of spent fuel can be found out. This report discusses in detail the experiment conducted for this purpose. (author)

Determination of the uranium concentration in apatite by the fission - track registration technique

International Nuclear Information System (INIS)

D'Oliveira Cardoso, D.

1983-01-01

The feasibility of using the fission-track registration technique to determine the uranium content in the phosphate rock beneficiation steps carried on by CompanhiA Arafertil, Araxa, Minas Gerais, Brazil is studied. This determination is of considerable interest to the environmental control of the Arafertil installations as well as of its surroundings or of the areas where these products will be used. The so called wet method was adopted and a 10 μm polycarbonate foil, fabricated by Bayer under the trade name Makrofol KG was used as detector. From the calibration curve obtained, it was possible to determine uranium contents in sample solutions ranging from 21 to 212 μg U/1 with an accuracy of 8 to 14.7%, respectively. The results obtained demonstrated that the technique used is appropriate to the purposes previously aimed at. (Author) [pt

A method of surface area measurement of fuel materials by fission gas release at low temperature

International Nuclear Information System (INIS)

Kaimal, K.N.G.; Naik, M.C.; Paul, A.R.; Venkateswarlu, K.S.

1989-01-01

The present report deals with the development of a method for surface area measurement of nuclear fuel as well as fissile doped materials by fission gas release study at low temperature. The method is based on the evaluation of knock-out release rate of fission 133 Xe from irradiated fuel after sufficient cooling to decay the short lived activity. The report also describes the fabrication of an ampoule breaker unit for such study. Knock-out release rate of 133 Xe has been studied from UO 2 powders having varying surface area 'S' ranging from 270 cm 2 /gm to 4100 cm 2 /gm at two fissioning rates 10 12 f/cm 3 . sec. and 3.2x10 10 f/cm.sec. A relation between K and A has been established and discussed in this report. (author). 6 refs

An extensive apatite fission-track study throughout the Northern Apennines Nappe belt

International Nuclear Information System (INIS)

Abbate, E.; Balestrieri, M.L.; Bigazzi, G.; Ventura, B.; Zattin, M.; Zuffa, G.G.

1999-01-01

This paper takes into consideration more than 100 apatite fission-track analyses on samples coming from an approximately west-east cross-section throughout the Northern Apennines. This collisional chain is made of structural units and nappes (Ligurian and Tuscan Nappe) accreted to the Adriatic Foreland during the Neogene, which overthrust the Miocene turbiditic successions of the Cervarola and Marnoso-arenacea Formations. Different cooling ages and degrees of annealing delineate different evolution histories for these units. Exhumation of the western outcrops of the Ligurian Nappe can be placed at 8 Ma and follows a first denudation event occurred in Eocene times. Timing of exhumation decreases eastwards. A break in this general trend is shown by the Apuan Alps, that occupy an intermediate position and yielded the youngest cooling ages. In the external part of the Marnoso-arenacea foredeep deposits this tendency could not be tested because total annealing of the apatite system has not been reached. In this case, modeling of data allows evaluating maximum burial temperatures

Potential energy surfaces for ion-molecule reactions. Intersection of the 3A2 and 2B1 surfaces of NH+2

International Nuclear Information System (INIS)

Bender, C.F.; Meadows, J.H.; Schaefer, H.F. III.

1976-04-01

A theoretical study of two of the low-lying NH 2 + potential energy surfaces was performed. The intersection and avoided intersection (for C/sub s/ geometries) of the lowest 3 A 2 and 3 B 1 surfaces allows a pathway by which the ground state of HH 2 + may be accessed without a potential barrier. The electronic structure calculations employed a double zeta plus polarization basis set, and correlation effects were taken into account using the newly developed Vector Method (VM). To test the validity of this basis, additional self-consistent-field studies were performed using a very large contracted gaussian basis N(13s 8p 3d/9s 6p 3d), H(6s 2p/4s 2p). The 3 A 2 surface, on which N + and H 2 may approach, has a surprising deep potential minimum, approximately 60 kcal/mole, occurring at r/sub e/(NH) approximately 1.26 A and theta/sub e/(HNH) approximately 43 0 . Electron correlation is responsible for about 15 kcal of this well depth, which appears fairly insensitive to extension of the basis set beyond the double zeta plus polarization level. The line of intersection (or seam) of the 3 A 2 and 3 B 1 surfaces is presented both numerically and pictorially. The minimum energy along this seam occurs at approximately 51 kcal below separated N + + H 2 . Thus for sufficiently low energies one expects N + - H 2 collisions to provide considerable ''complex formation.'' 3 figs, 1 table, 28 refs

Chemical Production using Fission Fragments

International Nuclear Information System (INIS)

Dawson, J. K.; Moseley, F.

1960-01-01

Some reactor design considerations of the use of fission recoil fragment energy for the production of chemicals of industrial importance have been discussed previously in a paper given at the Second United Nations International Conference on the Peaceful Uses of Atomic Energy [A/Conf. 15/P.76]. The present paper summarizes more recent progress made on this topic at AERE, Harwell. The range-energy relationship for fission fragments is discussed in the context of the choice of fuel system for a chemical production reactor, and the experimental observation of a variation of chemical effect along the length of a fission fragment track is described for the irradiation of nitrogen-oxygen mixtures. Recent results are given on the effect of fission fragments on carbon monoxide-hydrogen gas mixtures and on water vapour. No system investigated to date shows any outstanding promise for large-scale chemical production. (author) [fr

Evolution of the Chos Malal and Agrio fold and thrust belts, Andes of Neuquén: Insights from structural analysis and apatite fission track dating

Science.gov (United States)

Rojas Vera, E. A.; Mescua, J.; Folguera, A.; Becker, T. P.; Sagripanti, L.; Fennell, L.; Orts, D.; Ramos, V. A.

2015-12-01

The Chos Malal and Agrio fold and thrust belts are located in the western part of the Neuquén basin, an Andean retroarc basin of central-western Argentina. Both belts show evidence of tectonic inversion at the western part during Late Cretaceous times. The eastern part is dominated by late Miocene deformation which also partially reactivated the western structures. This work focuses on the study of the regional structure and the deformational event that shaped the relief of this part of the Andes. Based on new field work and structural data and previously published works a detailed map of the central part of the Neuquén basin is presented. Three regional structural cross sections were surveyed and balanced using the 2d Move™ software. In order to define a more accurate uplift history, new apatite fission track analyses were carried on selected structures. These data was used for new thermal history modeling of the inner part of the Agrio and Chos Malal fold and thrust belts. The results of the fission track analyses improve the knowledge of how these fold and thrust belts have grown trough time. Two main deformational events are defined in Late Cretaceous to Paleocene and Late Miocene times. Based on this regional structural analysis and the fission track data the precise location of the orogenic front for the Late Cretaceous-Paleocene times is reconstructed and it is proposed a structural evolution of this segment of the Andes. This new exhumation data show how the Late Cretaceous to Paleocene event was a continuous and uninterrupted deformational event.

Critical insight into the influence of the potential energy surface on fission dynamics

International Nuclear Information System (INIS)

Mazurek, K.; Schmitt, C.; Wieleczko, J. P.; Ademard, G.; Nadtochy, P. N.

2011-01-01

The present work is dedicated to a careful investigation of the influence of the potential energy surface on the fission process. The time evolution of nuclei at high excitation energy and angular momentum is studied by means of three-dimensional Langevin calculations performed for two different parametrizations of the macroscopic potential: the Finite Range Liquid Drop Model (FRLDM) and the Lublin-Strasbourg Drop (LSD) prescription. Depending on the mass of the system, the topology of the potential throughout the deformation space of interest in fission is observed to noticeably differ within these two approaches, due to the treatment of curvature effects. When utilized in the dynamical calculation as the driving potential, the FRLDM and LSD models yield similar results in the heavy-mass region, whereas the predictions can be strongly dependent on the Potential Energy Surface (PES) for medium-mass nuclei. In particular, the mass, charge, and total kinetic energy distributions of the fission fragments are found to be narrower with the LSD prescription. The influence of critical model parameters on our findings is carefully investigated. The present study sheds light on the experimental conditions and signatures well suited for constraining the parametrization of the macroscopic potential. Its implication regarding the interpretation of available experimental data is briefly discussed.

Urban Intersection Recognition and Construction Based on Big Trace Data

Directory of Open Access Journals (Sweden)

TANG Luliang

2017-06-01

Full Text Available Intersection is an important part of the generation and renewal of urban traffic network. In this paper, a new method was proposed to detect urban intersections automatically from the spatiotemporal big trace data. Firstly, the turning point pairs were based on tracking the trace data collected by vehicles. Secondly, different types of turning point pairs were clustered by using spatial growing clustering method based on angle and distance differences, and the clustering methods of local connectivity was used to recognize the intersection. Finally, the intersection structure of multi-level road network was constructed with the range of the intersection and turning point pairs. Taking the taxi trajectory data in Wuhan city as an example, the experimental results showed that the method proposed in this paper can automatically detect and recognize the road intersection and its structure.

Improving process methodology for measuring plutonium burden in human urine using fission track analysis

International Nuclear Information System (INIS)

Krahenbuhl, M.P.; Slaughter, D.M.

1998-01-01

The aim of this paper is to clearly define the chemical and nuclear principles governing Fission Track Analysis (FTA) to determine environmental levels of 239 Pu in urine. The paper also addresses deficiencies in FTA methodology and introduces improvements to make FTA a more reliable research tool. Our refined methodology, described herein, includes a chemically-induced precipitation phase, followed by anion exchange chromatography and employs a chemical tracer, 236 Pu. We have been able to establish an inverse correlation between Pu recovery and sample volume and our data confirms that increases in sample volume do not result in higher accuracy or lower detection limits. We conclude that in subsequent studies, samples should be limited to approximately two liters. The Pu detection limit for a sample of this volume is 2.8 μBq/l. (author)

CR-39 as induced track detector in reactor: irradiation effect

International Nuclear Information System (INIS)

Zylberberg, H.

1989-07-01

A systematic study about reactor's neutrons radiation effect and gamma radiation effect on the properties of CR-39 that are significant for its use as induced fission track detector is showed. The following studies deserved attention: kinetics of the fission track chemical development; efficiency to register and to develop fission track; losses of developable tracks; variation in the number of developable tracks and variation in the visible and ultraviolet radiation spectrum. The dissertation is organized in seven specific chapters: solid state nuclear tracks (SSNT); CR-39 as SSNT; objectives and problems presentation; preparation and characterization of CR-39 as SSNT; gamma irradiation effect on the properties of CR-39 as SSNT; reactor neutron irradiation effect on the properties of CR-39 as SSNT and, results discussions and conclusions. The main work contributions are the use of CR-39 in the determination of fissionable nuclide as thorium and uranium in solid and liquid samples; gamma radiation damage on CR-39 as well as the reactor's neutron damage on CR-39. (B.C.A.) 62 refs, 53 figs, 21 tabs

Science and technology with nuclear tracks in solids

CERN Document Server

Buford-Price, P

2005-01-01

Fission track dating has greatly expanded its usefulness to geology over the last 40 years. It is central to thermochronology—the use of shortened fission tracks to decipher the thermal history, movement, and provenance of rocks. When combined with other indicators, such as zircon color and (U–Th)/He, a range of temperatures from C to C can be studied. Combining fission track analysis with cosmogenic nuclide decay rates, one can study landscape development and denudation of passive margins. Technological applications have expanded from biological filters, radon mapping, and dosimetry to the use of ion track microtechnology in microlithography, micromachining by ion track etching, microscopic field emission tips, magnetic nanowires as magnetoresistive sensors, microfluidic devices, physiology of ion channels in single cells, and so on. In nuclear and particle physics, relatively insensitive glass detectors have been almost single-handedly responsible for our knowledge of cluster radioactivity, and plastic ...

An international research project on Armenian archaeological sites: fission-track dating of obsidians

Energy Technology Data Exchange (ETDEWEB)

Badalian, R.; Bigazzi, G. E-mail: g.bigazzi@iggi.pi.cnr.it; Cauvin, M.-C.; Chataigner, C.; Jrbashyan, R.; Karapetyan, S.G.; Oddone, M.; Poidevin, J.-L

2001-06-01

In the Mediterranean and adjacent regions, the Caucasus is one of the less studied areas in relation to provenance studies of prehistoric obsidian artefacts. In the frame of an international INTAS research project, an extensive surveying and sampling campaign was carried out in the numerous obsidian bearing volcanic complexes of Armenia. 33 obsidian samples were analysed using the fission-track dating method in order to characterise the potential sources of the numerous artefacts found in prehistoric sites. Ages cluster into five groups--Upper Neopleistocene Q{sub III}, Middle Neopleistocene Q{sub II}, Lower Neopleistocene Q{sub I}, Lower Eopleistocene Q{sub EI} and Lower Pliocene N{sub 3}{sup 1} groups. This research represents a significant contribution to a better knowledge of chronology of Armenian volcanism for which only few data were available. The resulting data-set appears to be a solid base for future provenance studies.

Fission yield calculation using toy model based on Monte Carlo simulation

International Nuclear Information System (INIS)

Jubaidah; Kurniadi, Rizal

2015-01-01

Toy model is a new approximation in predicting fission yield distribution. Toy model assumes nucleus as an elastic toy consist of marbles. The number of marbles represents the number of nucleons, A. This toy nucleus is able to imitate the real nucleus properties. In this research, the toy nucleons are only influenced by central force. A heavy toy nucleus induced by a toy nucleon will be split into two fragments. These two fission fragments are called fission yield. In this research, energy entanglement is neglected. Fission process in toy model is illustrated by two Gaussian curves intersecting each other. There are five Gaussian parameters used in this research. They are scission point of the two curves (R c ), mean of left curve (μ L ) and mean of right curve (μ R ), deviation of left curve (σ L ) and deviation of right curve (σ R ). The fission yields distribution is analyses based on Monte Carlo simulation. The result shows that variation in σ or µ can significanly move the average frequency of asymmetry fission yields. This also varies the range of fission yields distribution probability. In addition, variation in iteration coefficient only change the frequency of fission yields. Monte Carlo simulation for fission yield calculation using toy model successfully indicates the same tendency with experiment results, where average of light fission yield is in the range of 90fission yield is in about 135

Fission yield calculation using toy model based on Monte Carlo simulation

Energy Technology Data Exchange (ETDEWEB)

Jubaidah, E-mail: jubaidah@student.itb.ac.id [Nuclear Physics and Biophysics Division, Department of Physics, Bandung Institute of Technology. Jl. Ganesa No. 10 Bandung – West Java, Indonesia 40132 (Indonesia); Physics Department, Faculty of Mathematics and Natural Science – State University of Medan. Jl. Willem Iskandar Pasar V Medan Estate – North Sumatera, Indonesia 20221 (Indonesia); Kurniadi, Rizal, E-mail: rijalk@fi.itb.ac.id [Nuclear Physics and Biophysics Division, Department of Physics, Bandung Institute of Technology. Jl. Ganesa No. 10 Bandung – West Java, Indonesia 40132 (Indonesia)

2015-09-30

Toy model is a new approximation in predicting fission yield distribution. Toy model assumes nucleus as an elastic toy consist of marbles. The number of marbles represents the number of nucleons, A. This toy nucleus is able to imitate the real nucleus properties. In this research, the toy nucleons are only influenced by central force. A heavy toy nucleus induced by a toy nucleon will be split into two fragments. These two fission fragments are called fission yield. In this research, energy entanglement is neglected. Fission process in toy model is illustrated by two Gaussian curves intersecting each other. There are five Gaussian parameters used in this research. They are scission point of the two curves (R{sub c}), mean of left curve (μ{sub L}) and mean of right curve (μ{sub R}), deviation of left curve (σ{sub L}) and deviation of right curve (σ{sub R}). The fission yields distribution is analyses based on Monte Carlo simulation. The result shows that variation in σ or µ can significanly move the average frequency of asymmetry fission yields. This also varies the range of fission yields distribution probability. In addition, variation in iteration coefficient only change the frequency of fission yields. Monte Carlo simulation for fission yield calculation using toy model successfully indicates the same tendency with experiment results, where average of light fission yield is in the range of 90fission yield is in about 135

Phanerozoic polycyclic evolution of the southwestern Angola margin: New insights for apatite fission track and (U-Th)/He methodologies

Science.gov (United States)

Venancio da Silva, Bruno; Hackspacher, Peter; Carina Siqueira Ribeiro, Marli; Glasmacher, Ulrich Anton

2016-04-01

The low-temperature thermochronology has been an important tool to quantify geological process in passive continental margins. In this context, the Angolan margin shows evidence of a polycyclic post-rift evolution marked by different events of uplift, basin inversion and changes in sedimentation rates to the marginal basins, which have controlled the salt tectonics and the hydrocarbon deposits (1,2,3,4). To understand the post break-up evolution of the southwestern Angola margin, it were collected outcrop samples for apatite fission track (AFT) and (U-Th)/He analysis ranging in elevation from 79 m to 1675 m from the coast toward the interior plateau in a profile between Namibe and Lubango cities. The area lies on the edge of Central and Southern Atlantic segments a few kilometers northward the Walvis ridge and encompasses the Archean and Proterozoic basement rocks of the Congo craton. The AFT ages ranging from 120.6 ± 8.9 Ma to 328.8 ± 28.5 Ma and they show a trend of increasing age toward the Great Escarpment with some exceptions. The partial mean track lengths (MTLs) vary between 11.77 ± 1.82 μm to 12.34 ± 1.13 μm with unimodal track length distributions (TDLs). The partial (U-Th)/He ages ranging from 104.85 ± 3.15 Ma to 146.95 ± 4.41 Ma and show the same trend of increasing ages landward, little younger than the AFT ages, which could be interpreted as a fast exhumation episode in Late Jurassic - Early Cretaceous times. The thermal histories modelling has been constrained with the kinetic parameters Dpar (5) and c-axis angle (6) by the software Hefty (7). Both AFT and (U-Th)/He thermal histories modelling indicate three episodes of denudation/uplift driven cooling: (a) from Late Jurassic to Early Cretaceous, (b) a smallest one in the Late Cretaceous and (c) from Oligocene-Miocene to recent, which are compatible with geophysical data of the offshore Namibe basin that estimate the greater thickness of sediments formed in the first and third episodes

Tracking the multi-stage exhumation history of the western Chinese Tianshan by Apatite Fission Track (AFT) dating - Implications for the preservation of epithermal deposits in ancient orogenic belt

Science.gov (United States)

Wang, Yannan; Cai, Keda

2017-04-01

The western Chinese Tianshan, located in the southern domain of the Central Asian Orogenic Belt (CAOB), was originally constructed by multiple accretion-collision processes in the Paleozoic, and was superimposed by complex intracontinental tectonic evolution in the Mesozoic-Cenozoic. Understanding the timing and mechanism of the latter geological processes is critical to unravel the preservation conditions of the epithermal deposits in the western Chinese Tianshan. This work presents new apatite fission track (AFT) data for three mountain ranges of the western Chinese Tianshan to track their exhumation history. Our AFT data gave a wide range of ages from 76.8 ± 5.5 Ma to 182.3 ± 9.9 Ma, and the mean confined fission track lengths are between 9.8 ± 0.5 μm and 12.3 ± 0.2 μm. The new data, in combination with the thermal history modeling，enable us to attribute the exhumation history to three primary stages, including Early Permian (300-280 Ma), Late Triassic-Early Cretaceous (230-130 Ma), and Late Oligocene-Early Miocene (30-20 Ma). The first stage may be caused by the terrane accretion-collision in the late Paleozoic. The second stage was likely related to the closure of the Mongol-Okhotsk Ocean during the Mesozoic. The last one is regarded as the result of the collision between the Indian Plate and the Eurasia Plate in the Cenozoic. The extraordinary exhumation processes of these three major mountain ranges might have been responsible for sediment supply to the corresponding intra-mountain basins in the western Chinese Tianshan, and the particularly mountain-basin coupling evolution is ascribed to an essential condition for the preservation of epithermal deposits in ancient orogenic belt.

Diallyl phthalate (DAP) solid state nuclear track detector

CERN Document Server

Koguchi, Y; Ashida, T; Tsuruta, T

2003-01-01

Diallyl phthalate (DAP) solid state nuclear track detector is suitable for detecting heavy ions such as fission fragments, because it is insensitive to right ions such as alpha particles and protons. Detection efficiency of fission tracks is about 100%, which is unaffected under conditions below 240degC lasting for 1h or below 1 MGy of gamma-ray irradiation. Optimum etching condition for the DAP detector for detection of fission fragments is 2-4 h using 30% KOH aqueous solution at 90degC or 8-15 min using PEW-65 solution at 60degC. DAP detector is useful in detecting induced fission tracks for dating of geology or measuring intense heavy ions induced by ultra laser plasma. The fabrication of copolymers of DAP and CR-39 makes it possible to control the discrimination level for detection threshold of heavy ions. (author)

The thermal history of the Karoo Moatize-Minjova Basin, Tete Province, Mozambique: An integrated vitrinite reflectance and apatite fission track thermochronology study

Science.gov (United States)

Fernandes, Paulo; Cogné, Nathan; Chew, David M.; Rodrigues, Bruno; Jorge, Raul C. G. S.; Marques, João; Jamal, Daud; Vasconcelos, Lopo

2015-12-01

The Moatize-Minjova Basin is a Karoo-aged rift basin located in the Tete Province of central Mozambique along the present-day Zambezi River valley. In this basin the Permian Moatize and Matinde formations consist of interbedded carbonaceous mudstones and sandstones with coal seams. The thermal history has been determined using rock samples from two coal exploration boreholes (ca. 500 m depth) to constrain the burial and exhumation history of the basin. Organic maturation levels were determined using vitrinite reflectance and spore fluorescence/colour. Ages and rates of tectonic uplift and denudation have been assessed by apatite fission track analysis. The thermal history was modelled by inverse modelling of the fission track and vitrinite reflectance data. The Moatize Formation attained a coal rank of bituminous coals with low to medium volatiles (1.3-1.7%Rr). Organic maturation levels increase in a linear fashion downhole in the two boreholes, indicating that burial was the main process controlling peak temperature maturation. Calculated palaeogeothermal gradients range from 59 °C/km to 40 °C/km. According to the models, peak burial temperatures were attained shortly (3-10 Ma) after deposition. Apatite fission track ages [146 to 84 Ma (Cretaceous)] are younger than the stratigraphic age. Thermal modelling indicates two episodes of cooling and exhumation: a first period of rapid cooling between 240 and 230 Ma (Middle - Upper Triassic boundary) implying 2500-3000 m of denudation; and a second period, also of rapid cooling, from 6 Ma (late Miocene) onwards implying 1000-1500 m of denudation. The first episode is related to the main compressional deformation event within the Cape Fold Belt in South Africa, which transferred stress northwards on pre-existing transtensional fault systems within the Karoo rift basins, causing tectonic inversion and uplift. During the Mesozoic and most of the Cenozoic the basin is characterized by very slow cooling. The second period

Stress intensity factors for deep cracks emanating from the corner formed by a hole intersecting a plate surface

Science.gov (United States)

Mcgowan, J. J.; Smith, C. W.

1976-01-01

The stress intensity factors (SIFs) at the end points of flaws emanating from the corner formed by the intersection of a plate with a hole were determined using stress freezing photoelasticity and a numerical technique known as the Taylor series correction method to extract the SIF values from the photoelastic data. The geometries studied were crack depth to thickness ratios of about 0.2, 0.5, and 0.75; crack depth to crack length ratios of about 1.0 to 2.0; and crack length to hole radius ratios of about 0.5 to 2.0. The SIFs were determined at the intersection of the flaw border with the plate surface (KS) and with the edge of the hole (KH). It is shown that extension of a crack emanating from a corner of intersection of a hole with a plate under monotonically increasing load is not self-similar and that as the flaw depth increases, KH decreases and KS increases. Existing theories and design criteria significantly overestimate the SIF at both the hole and the surface except for shallow flaws at the hole and deep flaws at the surface.

Chevron defect at the intersection of grain boundaries with free surfaces in Au

International Nuclear Information System (INIS)

Radetic, T.; Lancon, F.; Dahmen, U.

2002-01-01

We have identified a new defect at the intersection between grain boundaries and surfaces in Au using atomic resolution transmission electron microscopy. At the junction line of 90 deg. tilt grain boundaries of (110)-(001) orientation with the free surface, a small segment of the grain boundary, about 1 nm in length, dissociates into a triangular region with a chevronlike stacking disorder and a distorted hcp structure. The structure and stability of these defects are confirmed by atomistic simulations, and we point out the relationship with the one-dimensional incommensurate structure of the grain boundary

Fission gas detection system

International Nuclear Information System (INIS)

Colburn, R.P.

1984-01-01

A device for collecting fission gas released by failed fuel rods which device uses a filter adapted to pass coolant but to block passage of fission gas bubbles due to the surface tension of the bubbles. The coolant may be liquid metal. (author)

Nuclear track radiography of 'hot' aerosol particles

International Nuclear Information System (INIS)

Boulyga, S.F.; Kievitskaja, A.I.; Kievets, M.K.; Lomonosova, E.M.; Zhuk, I.V.; Yaroshevich, O.I.; Perelygin, V.P.; Petrova, R.; Brandt, R.; Vater, P.

1999-01-01

Nuclear track radiography was applied to identify aerosol 'hot' particles which contain elements of nuclear fuel and fallout after Chernobyl NPP accident. For the determination of the content of transuranium elements in radioactive aerosols the measurement of the α-activity of 'hot' particles by SSNTD was used in this work, as well as radiography of fission fragments formed as a result of the reactions (n,f) and (γ,f) in the irradiation of aerosol filters by thermal neutrons and high energy gamma quanta. The technique allowed the sizes and alpha-activity of 'hot' particles to be determined without extracting them from the filter, as well as the determination of the uranium content and its enrichment by 235 U, 239 Pu and 241 Pu isotopes. Sensitivity of determination of alpha activity by fission method is 5x10 -6 Bq per particle. The software for the system of image analysis was created. It ensured the identification of track clusters on an optical image of the SSNTD surface obtained through a video camera and the determination of size and activity of 'hot' particles

Study of uranium mineralization in rock samples from marwat range bannu basin by fission track analysis technique

International Nuclear Information System (INIS)

Qureshi, A.Z.; Ullah, K.; Ullah, N.; Akram, M.

2004-07-01

The Geophysics Division, Atomic Energy Minerals Centre (AEMC), Lahore has planned a uranium exploration program in Marwat Range, Bannu Basin. In this connection 30 thin sections of rock samples, collected from four areas; namely, Darra Tang, Simukili, Karkanwal and Sheikhillah from Marwat Range, and one from Salt Range were provided to Nuclear Geology Group of Physics Research Division, PINSTECH for the study of nature and mechanism of uranium mineralization These studies are aimed to help in designing uranium exploration strategy by providing the loci of uranium sources in the Marwat and Salt Ranges. The samples have been studied using fission track analysis technique. (author)

Challenging fission cross section simulation with long standing macro-microscopic model of nucleus potential energy surface

International Nuclear Information System (INIS)

Tamagno, Pierre

2015-01-01

The work presented here aims to improve models used in the fission cross section evaluation. The results give insights for a significant breakthrough in this field and yielded large extensions of the evaluation code CONRAD. Partial cross sections are inherently strongly correlated together as of the competition of the related reactions must yield the total cross section. Therefore improving fission cross section benefits to all partial cross sections. A sound framework for the simulation of competitive reactions had to be settled in order to further investigate on the fission reaction; this was implemented using the TALYS reference code as guideline. After ensuring consistency and consistency of the framework, focus was made on fission. Perspective resulting from the use of macroscopic-microscopic models such as the FRDM and FRLDM were analyzed; these models have been implemented and validated on experimental data and benchmarks. To comply with evaluation requirements in terms of computation time, several specific numerical methods have been used and parts of the program were written to run on GPU. These macroscopic-microscopic models yield potential energy surfaces that can be used to extract a one-dimensional fission barrier. This latter can then be used to obtained fission transmission coefficients that can be used in a Hauser-Feshbach model. This method has been finally tested for the calculation of the average fission cross section for 239 Pu(n,f). (author) [fr

Planetary Surface Power and Interstellar Propulsion Using Fission Fragment Magnetic Collimator Reactor

International Nuclear Information System (INIS)

Tsvetkov, Pavel V.; Hart, Ron R.; King, Don B.; Rochau, Gary E.

2006-01-01

Fission energy can be used directly if the kinetic energy of fission fragments is converted to electricity and/or thrust before turning into heat. The completed US DOE NERI Direct Energy Conversion (DEC) Power Production project indicates that viable DEC systems are possible. The US DOE NERI DEC Proof of Principle project began in October of 2002 with the goal to demonstrate performance principles of DEC systems. One of the emerging DEC concepts is represented by fission fragment magnetic collimator reactors (FFMCR). Safety, simplicity, and high conversion efficiency are the unique advantages offered by these systems. In the FFMCR, the basic energy source is the kinetic energy of fission fragments. Following escape from thin fuel layers, they are captured on magnetic field lines and are directed out of the core and through magnetic collimators to produce electricity and thrust. The exiting flow of energetic fission fragments has a very high specific impulse that allows efficient planetary surface power and interstellar propulsion without carrying any conventional propellant onboard. The objective of this work was to determine technological feasibility of the concept. This objective was accomplished by producing the FFMCR design and by analysis of its performance characteristics. The paper presents the FFMCR concept, describes its development to a technologically feasible level and discusses obtained results. Performed studies offer efficiencies up to 90% and velocities approaching speed of light as potentially achievable. The unmanned 10-tons probe with 1000 MW FFMCR propulsion unit would attain mission velocity of about 2% of the speed of light. If the unit is designed for 4000 MW, then in 10 years the unmanned 10-tons probe would attain mission velocity of about 10% of the speed of light

Post-irradiation studies on knock-out and pseudo-recoil releases of fission products from fissioning UO2

International Nuclear Information System (INIS)

Yamagishi, S.; Tanifuji, T.

1976-01-01

By using post-irradiation techniques, in-pile releases of 133 Xe, sup(85m)Kr, 88 Kr, 87 Kr and 138 Xe from UO 2 fissioning at low temperatures below about 200 0 C are studied: these are analyzed into a time-dependent knock-out and time-independent pseudo-recoil releases. For the latter, a 'self knock-out' mechanism is proposed: when a fission fragment loses thoroughly its energy near the UO 2 surface and stops there, it will knock out the surface substances and accordingly the fragment (i.e. the fission product) will be released. The effective thickness of the layer where the self knock-out occurs is found to be approximately 7A. As for the knock-out release, the following is estimated from its dependence on various factors: the knock-out release of fission products occurs from the surface layer with the effective thickness of approximately 20A: the shape of UO 2 matrix knocked out by one fission fragment passing through the surface is equivalent to a cylinder approximately 32A diameter by approximately 27A thick, (i.e. the knock-out coefficient for UO 2 is approximately 660 uranium atoms per knock-out event). On the basis of the above estimations, the conclusions derived from the past in-pile studies of fission gas releases are evaluated. (Auth.)

Modifications in track registration response of PADC detector by energetic protons

CERN Document Server

Dwivedi, K K; Fink, D; Mishra, R; Tripathy, S P; Kulshreshtha, A; Khathing, D T

1999-01-01

It has been well established that different ionising radiations modify the track registration properties of dielectric solids. In an effort to study the response of Polyallyl diglycol carbonate (PADC Homalite) detector towards fission fragment, PADC detectors were exposed to 10 sup 4 Gy dose of 62 MeV protons and then one set of samples were exposed to fission fragments from a sup 2 sup 5 sup 2 Cf source. Two of these detectors were containing a thin layer of Buckminsterfullerene (C sub 6 sub 0). The study of the etched tracks by Leitz Optical Microscope reveals that the track diameters are enhanced by more than 70% in the proton irradiated zone as compared to that in the unirradiated zone. Scanning Electron Microscopy was performed after etching the sample in 6 N NaOH at 55 deg. C for different etching times, to study the details of the surface modifications due to proton irradiation of PADC detectors with and without C sub 6 sub 0 layer. Our observations revealed that the diameters and density of proton tra...

Massachusetts Bay - Internal wave packets digitized from SAR imagery and intersected with a bathymetrically derived slope surface

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This feature class contains internal wave packets digitized from SAR imagery and intersected with a bathymetrically derived slope surface for Massachusetts Bay. The...

An early cretaceous phase of accelerated erosion on the south-western margin of Africa: evidence from apatite fission track analysis and the offshore sedimentary record

International Nuclear Information System (INIS)

Brown, R.W.; Gleadow, A.J.W.; Rust, D.J.; Summerfield, M.A.; De Wit, M.C.J.

1990-01-01

Apatite fission track ages and confined track length distributions have been determined for rock samples from the south-western continental margin of Africa. The apatite ages fall into two groups, one having early Cretaceous ages and mean confined track lengths of ∼ 14 μm with very few short tracks, and the other having older ages with confined track length distributions containing a significant proportion of strongly annealed tracks (<10 μm). In any particular area the older apatite ages only occur above a critical threshold elevation, forming a regional pattern in the data and indicating cooling of the upper few kilometres of the crust during the early cretaceous. This episode of cooling is shown to have been the consequence of an accelerated phase of erosion associated with the early stages of rifting and break-up of Gondwana, and correlates with sedimentation patterns derived from borehole data for the adjacent offshore basin. (author)

An early cretaceous phase of accelerated erosion on the south-western margin of Africa: evidence from apatite fission track analysis and the offshore sedimentary record

Energy Technology Data Exchange (ETDEWEB)

Brown, R.W.; Gleadow, A.J.W. (La Trobe Univ., Bundoora (Australia)); Rust, D.J.; Summerfield, M.A. (Edinburgh Univ. (UK)); De Wit, M.C.J. (De Beers Consolidated Mines Ltd., Kimberley (South Africa))

1990-01-01

Apatite fission track ages and confined track length distributions have been determined for rock samples from the south-western continental margin of Africa. The apatite ages fall into two groups, one having early Cretaceous ages and mean confined track lengths of {approx} 14 {mu}m with very few short tracks, and the other having older ages with confined track length distributions containing a significant proportion of strongly annealed tracks (<10 {mu}m). In any particular area the older apatite ages only occur above a critical threshold elevation, forming a regional pattern in the data and indicating cooling of the upper few kilometres of the crust during the early cretaceous. This episode of cooling is shown to have been the consequence of an accelerated phase of erosion associated with the early stages of rifting and break-up of Gondwana, and correlates with sedimentation patterns derived from borehole data for the adjacent offshore basin. (author).

Fission Surface Power Technology Demonstration Unit Test Results

Science.gov (United States)

Briggs, Maxwell H.; Gibson, Marc A.; Geng, Steven M.; Sanzi, James L.

2016-01-01

The Fission Surface Power (FSP) Technology Demonstration Unit (TDU) is a system-level demonstration of fission power technology intended for use on manned missions to Mars. The Baseline FSP systems consists of a 190 kWt UO2 fast-spectrum reactor cooled by a primary pumped liquid metal loop. This liquid metal loop transfers heat to two intermediate liquid metal loops designed to isolate fission products in the primary loop from the balance of plant. The intermediate liquid metal loops transfer heat to four Stirling Power Conversion Units (PCU), each of which produce 12 kWe (48 kW total) and reject waste heat to two pumped water loops, which transfer the waste heat to titanium-water heat pipe radiators. The FSP TDU simulates a single leg of the baseline FSP system using an electrically heater core simulator, a single liquid metal loop, a single PCU, and a pumped water loop which rejects the waste heat to a Facility Cooling System (FCS). When operated at the nominal operating conditions (modified for low liquid metal flow) during TDU testing the PCU produced 8.9 kW of power at an efficiency of 21.7 percent resulting in a net system power of 8.1 kW and a system level efficiency of 17.2 percent. The reduction in PCU power from levels seen during electrically heated testing is the result of insufficient heat transfer from the NaK heater head to the Stirling acceptor, which could not be tested at Sunpower prior to delivery to the NASA Glenn Research Center (GRC). The maximum PCU power of 10.4 kW was achieved at the maximum liquid metal temperature of 875 K, minimum water temperature of 350 K, 1.1 kg/s liquid metal flow, 0.39 kg/s water flow, and 15.0 mm amplitude at an efficiency of 23.3 percent. This resulted in a system net power of 9.7 kW and a system efficiency of 18.7 percent.

Use of fission track analysis technique for the determination of MicroBequerel level of {sup 239}Pu in urine samples from radiation workers handling MOX fuel

Energy Technology Data Exchange (ETDEWEB)

Yadav, J.R., E-mail: yadav_jogendra@rediffmail.co [Health Physics Laboratory, Health Physics Division, BARC, Tarapur 401502 (India); Rao, D.D.; Kumar, Ranjeet [Health Physics Laboratory, Health Physics Division, BARC, Tarapur 401502 (India); Aggarwal, S.K. [Fuel chemistry Division, BARC, Trombay, Mumbai 400085 (India)

2011-07-15

Fission track analysis (FTA) technique for the determination of {sup 239}Pu excreted through urine has been standardized using blank samples, tracer and {sup 239}Pu spikes. Double stage anion exchange separation protocol has been applied and an average radiochemical recovery of {sup 239}Pu of 18% was obtained. An average track registration efficiency of 11 tracks per {mu}Bq of {sup 239}Pu, irradiated to 0.35x10{sup 17} neutron fluence was established. Reagent blank urine samples from 11 controlled subjects were analyzed by FTA and an average of 149{+-}14 tracks was obtained. Minimum detectable activity of 34 {mu}Bq L{sup -1} of urine sample was obtained and will be useful for monitoring chronic exposure cases handling MOX fuel.

Photofission observations in reactor environments using selected fission-product yields

International Nuclear Information System (INIS)

Gold, R.; Ruddy, F.H.; Roberts, J.H.

1982-01-01

A new method for the observation of photofission in reactor environments is advanced. It is based on the in-situ observation of fission product yield. In fact, at a given in-situ reactor location, the fission product yield is simply a weighted linear combination of the photofission product yield, Y/sub gamma/, and the neutron induced fission product yield, Y/sub n. The weight factors arising in this linear combination are the photofission fraction and neutron induced fission fraction, respectively. This method can be readily implemented with established techniques for measuring in-situ reactor fission product yield. For example, one can use the method based on simultaneous irradiation of radiometric (RM) and solid state track recorder (SSTR) fission monitors. The sensitivity and accuracy and current knowledge of fission product yields. Unique advantages of this method for reactor applications are emphasized

High Efficiency, High Temperature Foam Core Heat Exchanger for Fission Surface Power Systems, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Fission-based power systems with power levels of 30 to ≥100 kWe will be needed for planetary surface bases. Development of high temperature, high efficiency heat...

Multisensor Distributed Track Fusion AlgorithmBased on Strong Tracking Filter and Feedback Integration1）

Institute of Scientific and Technical Information of China (English)

YANGGuo-Sheng; WENCheng-Lin; TANMin

2004-01-01

A new multisensor distributed track fusion algorithm is put forward based on combiningthe feedback integration with the strong tracking Kalman filter. Firstly, an effective tracking gateis constructed by taking the intersection of the tracking gates formed before and after feedback.Secondly, on the basis of the constructed effective tracking gate, probabilistic data association andstrong tracking Kalman filter are combined to form the new multisensor distributed track fusionalgorithm. At last, simulation is performed on the original algorithm and the algorithm presented.

Determination of uranium content in dental porcelains by means of the fission track method and estimation of radiation dose to oral mucosa by radioactive elements

International Nuclear Information System (INIS)

Sairenji, E.; Moriwaki, K.; Shimizu, M.; Noguchi, K.

1980-01-01

Porcelain teeth, some of which contain uranium compounds for aesthetic purpose, have been widely used in dental clinics. Hazardous effects due to uranium radiation have been suggested in recent publications. In the present study uranium concentrations were determined in four major brands of porcelain teeth marketed in Japan using the fission track method, and the absorbed doses to oral tissued were calculated. Average uranium concentrations of the brands studied were determined to be 3.6 ppm (0.33-10 ppm, Japan), 18 ppm (0.69-81 ppm, Japan), 9.4 ppm (2.5-14 ppm, Japan) and 82 ppm (11-205 ppm, U.S.), respectively. The corresponding dose equivalents at the surface of oral mucosal membrane were 2.9 rem yr -1 . 14 rem yr -1 , 7.6 rem yr -1 and 66 rem yr -1 . (author)

A criticism of the paper entitled 'A practical method of estimating standard error of the age in the Fission Track Dating method' by Johnson, McGee and Naeser

International Nuclear Information System (INIS)

Green, P.F.

1981-01-01

It is stated that the common use of Poissonian errors to assign uncertainties in fission-track dating studies has led Johnson, McGee and Naeser (1979) to the mistaken assumption that such errors could be used to measure the spatial variation of track densities. The analysis proposed by JMN 79, employing this assumption, therefore leads to erroneous assessment of the error in an age determination. The basis for the statement is discussed. (U.K.)

Fission of intermediate mass nuclei by photons of stopping radiation in the maximum energy range 0,8 - 1,8 MeV

International Nuclear Information System (INIS)

Lima, D.A. de.

1983-07-01

The fission of intermediate mass nuclei in Al - Ta interval, induced by stopping radiation phtons of maximum energies between 0,8 and 1.8 GeV is studied. Nd and Sm thin targets and Al, Ti, Co, Zr, Nb, Ag, In and Ta thick targets were used, considering all peculiarities inherent to absorption of fission fragments in the target. The samples were exposed into the 2.5 GeV Electron Synchrotron in Bonn Univerity. The fission fragment tracks were registered in foil type detectors using mica muscovite for Sm and Nd, CR-39 for Al and Ti and makrofol for Co, Zr; Nb, Ag, In, Nd and Ta. The track length and track depth angle distributions were measured for determining fission efficiencies. The fission cross sections and nuclear fissionable of the studied elements were evaluated. (M.C.K.) [pt

Tip model of cold fission

International Nuclear Information System (INIS)

Goennenwein, F.; Boersig, B.

1991-01-01

Cold fission is defined to be the limiting case of nuclear fission where virtually all of the available energy is converted into the total kinetic energy of the fragments. The fragments have, therefore, to be born in or at least close to their respective ground states. Starting from the viewpoint that cold fission corresponds to most compact scission configurations, energy constraints have been exploited to calculate minimum tip distances between the two nascent fragments in binary fission. Crucial input parameters to this tip model of cold fission are the ground-state deformations of fragment nuclei. It is shown that the minimum tip distances being compatible with energy conservation vary strongly with both the mass and charge fragmentation of the fission prone nucleus. The tip distances refer to nuclei with equivalent sharp surfaces. In keeping with the size of the surface width of leptodermous nuclei, only configurations where the tip distances are smaller than a few fm may be considered as valid scission configurations. From a comparison with experimental data on cold fission this critical tip distance appears to be 3.0 fm for the model parameters chosen. Whenever the model calculation yields tip distances being smaller than the critical value, a necessary condition for attaining cold fission is considered to be fulfilled. It is shown that this criterion allows to understand in fair agreement with experiment which mass fragmentations are susceptible to lead to cold fission and which fragment-charge divisions are the most favored in each isobaric mass chain. Being based merely on energy arguments, the model cannot aim at predicting fragment yields in cold fission. However, the tip model proposed appears well suited to delineate the phase space where cold fission phenomena may come into sight. (orig.)

Determination Of Uranium Concentration In Teeth Female Samples Using Fission Tracks In CR-39 From Different Countries

International Nuclear Information System (INIS)

Hummadi, S.S

2010-01-01

The present study was under taken to measure the uranium concentration in female teeth samples collected from different nationalities.The determination of uranium concentration in these samples has been done by using CR-39 track detector.The nuclear reaction is used as a source of nuclear fission fragments is (n, f) obtained by the bombardment of U-235 with thermal neutrons with flux (5*10 3 n/cm 2 .s) was used from (Am-Be) neutron source.The obtained results show the concentration is ranging from (0.58±0.7ppm) in Oman and Uae to (0.35±0.03ppm)in Iraqi for male, the uranium concentration was the highest in Oman and Uae for female

Nuclear tracks in the Angra dos Reis and Moore County meteorites

International Nuclear Information System (INIS)

Carver, E.A.; Anders, E.

1976-01-01

Charged particle tracks were studied in the Angra dos Reis and Moore County meteorites, both of which contain an unexplained excess of He 4 . A selective annealing method was used to resolve cosmic-ray tracks from fission tracks. It gave the following cosmic-ray and fission-track densities, in units of 10 6 cm -2 : Angra dos Reis 1.3 to 4.4 and 7.8; Moore Co. feldspar 1.9 to 3.0 and 0.51; Moore Co. pigeonite 2.0 to 2.9 and 0.078 to 0.35. The fission-track densities are 10 to 100 times higher than expected from U 238 ; the excess is probably due to extinct Pu 244 . The Pu 244 /U 238 ratios at the start of track retention were 0.003 for Angra dos Reis and 0.002 to 0.03 got Moore Co. No evidence was found for fission tracks attributable to the unknown progenitor of excess He 4 in these meteorites; the fission branch of this progenitor comprises less than 10 -5 the α-branch. A search for pleochroic halos also gave negative results. The preatmospheric radii of the two meteorites are >= 13 and >= 7 cm. According to meteor theory, this implies geocentric velocities of >19 and >= 6 km/sec. The etching behaviour of Angra dos Reis augite is highly anomalous, giving rise to spurious angular anisotropies and skewed length distributions. This confirms similar observation by Fleischer et al (Proc. Apollo II Lunar Sci. Conf. Geochem. Cosmochim. Acta Suppl.; 1:2103 (1970)) on lunar augite. (author)

A fundamental study of fission product deposition on the wall surface

International Nuclear Information System (INIS)

Ishiguro, R.; Sakashita, H.; Sugiyama, K.

1987-01-01

Deposition of soluble matters on wall surfaces is studied in the present report for the purpose to understand a mechanism of fission product deposition on the wall surface in a molten salt reactor. Calcium carbonate solution is used to observe the fundamental mechanism of deposition. The experiments are performed under conditions of turbulent flow of the solution over a heated wall. According to the experimental results a model is proposed to estimate deposition rate. The model consists of two parts, one is the initial nucleus formation on a clean wall surface and the other is the constant increase of deposition succeeding to the first stage. The model is assessed by comparing it with the experimental results. Both results coincide well in some parameters, but not so well in others. (author)

Solid state nuclear track detectors

International Nuclear Information System (INIS)

Medeiros, J.A.; Carvalho, M.L.C.P. de

1992-12-01

Solid state nuclear track detectors (SSNTD) are dielectric materials, crystalline or vitreous, which registers tracks of charged nuclear particles, like alpha particles or fission fragments. Chemical etching of the detectors origin tracks that are visible at the optical microscope: track etching rate is higher along the latent track, where damage due to the charged particle increase the chemical potential, and etching rate giving rise to holes, the etched tracks. Fundamental principles are presented as well as some ideas of main applications. (author)

Fission fragment angular distributions and fission cross section validation

International Nuclear Information System (INIS)

Leong, Lou Sai

2013-01-01

The present knowledge of angular distributions of neutron-induced fission is limited to a maximal energy of 15 MeV, with large discrepancies around 14 MeV. Only 238 U and 232 Th have been investigated up to 100 MeV in a single experiment. The n-TOF Collaboration performed the fission cross section measurement of several actinides ( 232 Th, 235 U, 238 U, 234 U, 237 Np) at the n-TOF facility using an experimental set-up made of Parallel Plate Avalanche Counters (PPAC), extending the energy domain of the incident neutron above hundreds of MeV. The method based on the detection of the 2 fragments in coincidence allowed to clearly disentangle the fission reactions among other types of reactions occurring in the spallation domain. I will show the methods we used to reconstruct the full angular resolution by the tracking of fission fragments. Below 10 MeV our results are consistent with existing data. For example in the case of 232 Th, below 10 MeV the results show clearly the variation occurring at the first (1 MeV) and second (7 MeV) chance fission, corresponding to transition states of given J and K (total spin and its projection on the fission axis), and a much more accurate energy dependence at the 3. chance threshold (14 MeV) has been obtained. In the spallation domain, above 30 MeV we confirm the high anisotropy revealed in 232 Th by the single existing data set. I'll discuss the implications of this finding, related to the low anisotropy exhibited in proton-induced fission. I also explore the critical experiments which is valuable checks of nuclear data. The 237 Np neutron-induced fission cross section has recently been measured in a large energy range (from eV to GeV) at the n-TOF facility at CERN. When compared to previous measurements, the n-TOF fission cross section appears to be higher by 5-7 % beyond the fission threshold. To check the relevance of n-TOF data, we simulate a criticality experiment performed at Los Alamos with a 6 kg sphere of 237 Np. This

Method of reproducing images using fission fragments and/or alpha ray etch tracks from toned photographs

International Nuclear Information System (INIS)

Thackray, M.

1976-01-01

A method is described for producing a photographic image on a normally non-photo-receptive surface comprising the steps of 1) toning the photograph with substances which combine with or replace the silver grains so that the photograph emits either spontaneously or indirectly fission fragments or alpha particles in amounts related to the distribution of the silver grains in the photograph, 2) placing the toned photograph contiguous with the surface on which the image is to be reproduced, for sufficient time for the emissions from the photograph to reproduce the image as a radiation-damage image on the surface, the damage areas having a close positional relationship to the silver grains in the original photograph. (author)

Uranium content and fission track ages of some basalts from the FAMOUS area

International Nuclear Information System (INIS)

Storzer, Dieter; Selo, Madeleine

1976-01-01

The uranium contents of basalts from the rift valley in the Atlantic ocean near 37 deg N range between 75 ppb and 450 ppb. The fission track ages of these basalts range between 3x10 3 years and 6x10 5 years. They increase with distance from the axis of the median valley. Therefore, the locus of accretion of new crust seems to be restricted to a relatively narrow zone along the valley floor. In addition, the ages indicate that during the last 10 5 years the rate of accretion has been slower to the west than to the east. This indicates a migration of the active spreading center to the west by at least 1 km. the sea-floor spreading rates are high, up to 9cm/year, near the center of actual magmatic activity. They decrease with distance from the valley axis to 0.7 cm/year at about 2 km in the west respectively 1.5 cm/year at about 4 km in the east

Effect of fission dynamics on the spectra and multiplicities of prompt fission neutrons

International Nuclear Information System (INIS)

Nix, J.R.; Madland, D.G.; Sierk, A.J.

1985-01-01

With the goal of examining their effect on the spectra and multiplicities of the prompt neutrons emitted in fission, we discuss recent advances in a unified macroscopic-microscopic description of large-amplitude collective nuclear dynamics. The conversion of collective energy into single-particle excitation energy is calculated for a new surface-plus-window dissipation mechanism. By solving the Hamilton equations of motion for initial conditions appropriate to fission, we obtain the average fission-fragment translational kinetic energy and excitation energy. The spectra and multiplicities of the emitted neutrons, which depend critically upon the average excitation energy, are then calculated on the basis of standard nuclear evaporation theory, taking into account the average motion of the fission fragments, the distribution of fission-fragment residual nuclear temperature, the energy dependence of the cross section for the inverse process of compound-nucleus formation, and the possibility of multiple-chance fission. Some illustrative comparisons of our calculations with experimental data are shown

Determination of uranium content in dental porcelains by means of the fission track method and estimation of radiation dose to oral mucosa by radioactive elements

International Nuclear Information System (INIS)

Sairenji, Eiko; Moriwaki, Kazunari; Shimizu, Masami; Noguchi, Kunikazu; Anzai, Ikuro.

1979-01-01

Porcelain teeth, some of which contained uranium compounds for aesthetic purpose, have been widely used in dental clinics. Recently, the hazardous effects by uranium radiation were suggested. In the present study, the authors carried out the determination of uranium concentrations of four major brands of porcelain teeth marketed in Japan using the fission track method, and the absorbed doses of oral tissues were calculated by the authors' introduced formula for calculation of alpha radiation. Average uranium concentrations of the brands studied were determined 3.6 ppm (0.33 - 10 ppm, Japan), 18 ppm (0.69 - 81 ppm, Japan), 9.4 ppm (2.5 - 14 ppm, Japan) and 82 ppm (11 - 205 ppm, U.S.A.), respectively. The corresponding dose equivalents at the surface of oral mucosal membrane were 2.9 rem y -1 , 14 rem y -1 , 7.6 rem y -1 and 66 rem y -1 . (author)

Annealing behavior of alpha recoil tracks in phlogopite

International Nuclear Information System (INIS)

Gao Shaokai; Yuan Wanming; Dong Jinquan; Bao Zengkuan

2005-01-01

Alpha recoil tracks (ARTs) formed during the a-decay of U, Th as well as their daughter nuclei are used as a new dating method which is to some extent a complementarity of fission track dating due to its ability to determine the age of young mineral. ARTs can be observable under phase-contrast interference microscope through chemical etching. In order to study the annealing behavior of ARTs in phlogopite, two methods of annealing experiments were executed. Samples were annealed in the electronic tube furnace at different temperatures ranging from 250 degree C to 450 degree C in steps of 50 degree C. For any given annealing temperature, different annealing times were used until total track fading were achieved. It is found that ARTs anneal much more easily than fission tracks, the annealing ratio increase non-linearly with annealing time and temperature. Using the Arrhenius plot, an activation energy of 0.68ev is finally found for 100% removal of ARTs, which is less than the corresponding value for fission tracks (FTs). Through extending the annealing time to geological time, a much lower temperature range of the sample's cooling history can be got.

Phanerozoic burial and exhumation history of southernmost Norway estimated from apatite fission-track analysis data and geological observations

Science.gov (United States)

Japsen, Peter; Green, Paul F.; Bonow, Johan M.; Chalmers, James A.; Rasmussen, Erik S.

2016-04-01

We present new apatite fission-track analysis (AFTA) data from 27 basement samples from Norway south of ~60°N. The data define three events of cooling and exhumation that overlap in time with events defined from AFTA in southern Sweden (Japsen et al. 2015). The samples cooled below palaeotemperatures of >100°C in a major episode of Triassic cooling as also reported by previous studies (Rohrman et al. 1995). Our study area is just south of the Hardangervidda where Cambrian sediments and Caledonian nappes are present. We thus infer that these palaeotemperatures reflect heating below a cover that accumulated during the Palaeozoic and Triassic. By Late Triassic, this cover had been removed from the Utsira High, off SW Norway, resulting in deep weathering of a granitic landscape (Fredin et al. 2014). Our samples were therefore at or close to the surface at this time. Palaeotemperatures reached ~80°C prior to a second phase of cooling and exhumation in the Jurassic, following a phase of Late Triassic - Jurassic burial. Upper Jurassic sandstones rest on basement near Bergen, NW of our study area (Fossen et al. 1997), and we infer that the Jurassic event led to complete removal of any remaining Phanerozoic cover in the region adjacent to the evolving rift system prior to Late Jurassic subsidence and burial. The data reveal a third phase of cooling in the early Miocene when samples that are now near sea level cooled below palaeotemperatures of ~60°C. For likely values of the palaeogeothermal gradient, such palaeotemperatures correspond to burial below rock columns that reach well above the present-day landscape where elevations rarely exceed 1 km above sea level. This implies that the present-day landscape was shaped by Neogene erosion. This is in agreement with the suggestion of Lidmar-Bergström et al. (2013) that the near-horizontal Palaeic surfaces of southern Norway are the result of Cenozoic erosion to sea level followed by uplift to their present elevations in a

Fission/milligram of 235U in BIG-10 Tests A, C, E, and B

International Nuclear Information System (INIS)

Gilliam, D.M.; Grundl, J.A.; Hansen, G.E.

1976-01-01

The entire series of dosimetry foil tests at BIG-10 (including the preliminary Test A, five fission foil set irradiations--Tests C, five non-fission foil set irradiations--Tests E, and five track-etch detector irradiations--Tests B) were monitored continuously by the NBS double fission chamber PP5 in the central test cavity. The accuracy of the absolute fission counting data (fissions/milligram of 235 U) is estimated to be 1.4% for Tests A, C, and E and 1.5% for Test B. Deposit mass assay uncertainties remain the dominant error

Isotopic Determination of Nuclear Materials Using Nuclear Fission Track Registration Technique and Thermal Ionization Mass Spectrometric Technique

International Nuclear Information System (INIS)

Jeon, Young Sin; Pyo, Hyeong Yeol; Park, Yong Joon; Song, Kyu Seok; Kim, Won Ho; Jee, Kwang Yong

2007-05-01

It is very important to develope the technology for the determination of isotopic ratios of hot particles( 234 U, 235 U, 236 U etc.) detected from swipe samples of various nuclear facilities. This technology is highly competitive internationally and has to be established independently as long as our government maintains atomic energy and treats nuclear materials. In this text, sample pretreatment procedure, gamma-ray counting, alpha or fission track techniques, isotopic analysis of U and Pu, background problems and detection limits for mass determination, and their application to the real swipe sample were described with detailed procedure. This technology would contribute to the Korean economy's high growth rate as well as to superiority of government's leading research and development programs if successfully established

Imprints left by natural radioactivity in geological materials: uranium fission tracks and thermoluminescence applications in earth sciences

International Nuclear Information System (INIS)

Broquet, P.; Chambaudet, A.; Rebetez, M.; Charlet, J.M.

1994-01-01

In a rock, all minerals which contain uranium are host to a number of spontaneous fission phenomena forming a single damaged area called a ''latent track'', observations of which may lead to dating, uranium mapping and finding paleo-geo-thermometers (thermal history, used in oil exploration). The radioactive elements during the decay process release energy which is trapped as electrons into the physical or chemical defects of the crystalline lattice; this energy can be later released by heating the mineral (thermic stimulated luminescence); the thermoluminescence is characterized by a glow which spectrum constitutes a typical feature of the mineral, its crystallization conditions and the subsequent evolution of the material. Natural and induced glow curve may be produced. 6 figs., 52 refs

Micelle fission through surface instability and formation of an interdigitating stalk

NARCIS (Netherlands)

Sammalkorpi, M.; Karttunen, M.E.J.; Haataja, M.

2008-01-01

We report on the first detailed atomic-scale studies of micelle fission in micellar systems consisting of anionic sodium dodecyl sulfate with explicit solvent. We demonstrate a new micelle fission pathway for ionic surfactants and show how micelle fission can be induced by varying the ionic

Annealing effects in solid-state track recorders

International Nuclear Information System (INIS)

Gold, R.; Roberts, J.H.; Ruddy, F.H.

1981-01-01

Current analyses of the annealing process in Solid State Track Recorders (SSTR) reveal fundamental misconceptions. The use of the Arrhenius equation to describe the decrease in track density resulting from annealing is shown to be incorrect. To overcome these deficiencies, generalized reaction rate theory is used to describe the annealing process in SSTR. Results of annealing experiments are used to guide this theoretical formulation. Within this framework, the concept of energy per etchable defect for SSTR is introduced. A general correlation between sensitivity and annealing susceptibility in SSTR is deduced. In terms of this general theory, the apparent correlation between fission track size and fission track density observed under annealing is readily explained. Based on this theoretical treatment of annealing phenomena, qualitative explanations are advanced for current enigmas in SSTR cosmic ray work

Reliable method for fission source convergence of Monte Carlo criticality calculation with Wielandt's method

International Nuclear Information System (INIS)

Yamamoto, Toshihiro; Miyoshi, Yoshinori

2004-01-01

A new algorithm of Monte Carlo criticality calculations for implementing Wielandt's method, which is one of acceleration techniques for deterministic source iteration methods, is developed, and the algorithm can be successfully implemented into MCNP code. In this algorithm, part of fission neutrons emitted during random walk processes are tracked within the current cycle, and thus a fission source distribution used in the next cycle spread more widely. Applying this method intensifies a neutron interaction effect even in a loosely-coupled array where conventional Monte Carlo criticality methods have difficulties, and a converged fission source distribution can be obtained with fewer cycles. Computing time spent for one cycle, however, increases because of tracking fission neutrons within the current cycle, which eventually results in an increase of total computing time up to convergence. In addition, statistical fluctuations of a fission source distribution in a cycle are worsened by applying Wielandt's method to Monte Carlo criticality calculations. However, since a fission source convergence is attained with fewer source iterations, a reliable determination of convergence can easily be made even in a system with a slow convergence. This acceleration method is expected to contribute to prevention of incorrect Monte Carlo criticality calculations. (author)

Progress in the application of solid-state track recorders to reactor physics experiments

International Nuclear Information System (INIS)

Besant, C.B.; Ipson, S.S.

1969-03-01

Heavily ionising particles passing through insulating materials cause tracks due to damage. These strain energy fields may be observed directly with an electron microscope or, after etching, the tracks may be seen with an optical microscope. The etching solution penetrates the damaged portion of the material and enlarges the hole if the etching is continued. This technique has been applied to detecting fission fragments from fissions taking place in a thin source of fissile material. The source, together with the insulating material is called a Solid-State Track Recorder and has been applied to the measurement of fission ratios in the fast critical assembly ZEBRA at Winfrith. The main disadvantage of the technique has been in counting tracks by eye which is laborious and subject to the human element. This has been overcome by counting tracks with a 'Quantimet' Computer Image Analyser. Absolute fission rate measurements are also discussed and it has been shown that measurements to an accuracy of better than ± 1% should be possible with this technique. (author)

Dynamic of an intra-continental orogenic prism: thermo-chronologic (apatite fission tracks) and tectonic evolution of the axial zone and the piedmont of the west-central Pyrenees

International Nuclear Information System (INIS)

Meresse, F.

2013-02-01

This work illustrates the application of thermo chronology to the study of the following geologic issue: the tectonic evolution of the Pyrenean oncologic prism. Thermo-chronology gives information on the vertical movements at the scale of geological eras. Thermo-chronology is based on the following principle: the decay of a nucleus gives birth to a daughter nucleus. Above a specific temperature named closure temperature, the daughter element can diffuse outside the system while below the closure temperature, diffusion is not possible. Consequently thermo-chronology can be considered to date the moment when a mineral goes below a a specific closure temperature. Minerals have different closure temperatures and so by using a suite of thermo-chronometers on a single sample, its cooling path through the crust can be reconstructed. This work focuses on apatite fission track (AFT)analysis which is a low temperature thermo-chronometer. In apatites the temperature range between 60 and 120 Celsius degrees corresponds to the partial annealing zone. The spontaneous fission of one U 238 nucleus entails the formation of one fission track. The determination of the initial quantity of U 238 is based on the natural steady ratio U 238 /U 235 which equals 137.88. The initial quantity of U 235 is determined through the neutron irradiation of the sample. The knowledge of the initial quantity of U 238 and the number of tracks in the sample allows the dating of the sample. In this work we combine AFT thermo- chronology with a detailed structural analysis to describe vertical movements related to the thrusting system evolution, and to determine the influence of the latter on the sedimentation/burial/exhumation cycle of the syn-orogenic deposits of the southern fore-land basin

Application of fission track technique for estimation of uranium concentration in drinking waters of Punjab

International Nuclear Information System (INIS)

Prabhu, S.P.; Raj, Sanu S.; Sawant, P.D.; Kumar, Ajay; Sarkar, P.K.; Tripathi, R.M.

2010-01-01

Full text: Drinking water samples were collected from four different districts, namely Bhatinda, Mansa, Faridkot and Firozpur, of Punjab for ascertaining the U(nat.) concentrations. The samples were collected from bore wells, hand pumps, tube wells and treated municipal water supply. All these samples (235 nos.) collected were preserved and processed by following the international standard protocol and analyzed by Laser Fluorimetry. Results of analysis by laser fluorimetry have been already reported. To ensure accuracy of the data obtained by laser fluorimetry, few samples (10 nos) from each district were analyzed by alpha spectrometry as well as by fission track analysis (FTA) technique. FTA in solution media for uranium has been already standardized in Bioassay laboratory of Health Physics Division. Few of drinking water sample was directly transferred to polythene tube sealed at one end. Lexan detector with proper identification mark was immersed in the samples and the other open end of the tube was also heat-sealed. Two tubes containing samples and one containing uranium standard (80 ppb) were irradiated in the Pneumatic Carrier Facility (PCF) of DHRUVA reactor. The Lexan detectors were then chemically etched and tracks were counted under an optical microscope at 400X magnification. Concentration of uranium in sample was determined by comparison technique. Quality assurance was carried out by replicate analysis and by analysis of standard reference materials. Uranium concentration in these samples ranged from 3.2 to 60.5 ppb with an average of 28.8 ppb. A t-test analysis for paired data was done to compare the results obtained by FTA and those obtained by laser fluorimeter. The calculated value for t is -1.19, which is greater than the tabulated value of t for 40 observations (-2.02 at 95% confidence level). This shows that the results of the measurements carried out by the FTA and laser fluorimetry are not significantly different. The preliminary studies

Intermediate energy nuclear fission

International Nuclear Information System (INIS)

Hylten, G.

1982-01-01

Nuclear fission has been investigated with the double-kinetic-energy method using silicon surface barrier detectors. Fragment energy correlation measurements have been made for U, Th and Bi with bremsstrahlung of 600 MeV maximum energy. Distributions of kinetic energy as a function of fragment mass are presented. The results are compared with earlier photofission data and in the case of bismuth, with calculations based on the liquid drop model. The binary fission process in U, Yb, Tb, Ce, La, Sb, Ag and Y induced by 600 MeV protons has been investigated yielding fission cross sections, fragment kinetic energies, angular correlations and mass distributions. Fission-spallation competition calculations are used to deduce values of macroscopic fission barrier heights and nuclear level density parameter values at deformations corresponding to the saddle point shapes. We find macroscopic fission barriers lower than those predicted by macroscopic theories. No indication is found of the Businaro Gallone limit expected to occur somewhere in the mass range A = 100 to A = 140. For Ce and La asymmetric mass distributions similar to those in the actinide region are found. A method is described for the analysis of angular correlations between complementary fission products. The description is mainly concerned with fission induced by medium-energy protons but is applicable also to other projectiles and energies. It is shown that the momentum and excitation energy distributions of cascade residuals leading to fission can be extracted. (Author)

Alpha and fission autoradiography of uranium rods

International Nuclear Information System (INIS)

Copic, M.; Ilicj, R.; Najzher, M.; Rant, J.

1977-01-01

Macro and micro-distribution of uranium minerals in ore bodies are investigated by alpha autoradiography and by neutron induced fission autoradiography using LR 115 solid state track detector. Optimal conditions are determined experimentally for both methods and examples presented. For field applications the alpha autoradiography (author)

A new technique to measure fission-product diffusion coefficients in UO2 fuel

International Nuclear Information System (INIS)

Hocking, W.H.; Verrall, R.A.; Bushby, S.J.

1999-01-01

This paper describes a new out-reactor technique for the measurement of fission-product diffusion rates in UO 2 . The technique accurately simulates in-reactor fission-fragment effects: a thermal diffusion that is due to localized mixing in the fission track, radiation-enhanced diffusion that is due to point-defect creation by fission fragments, and bubble resolution. The technique utilizes heavy-ion accelerators - low energy (40 keV to 1 MeV) for fission-product implantation, high energy (72 MeV) to create fission-fragment damage effects, and secondary ion mass spectrometry (SIMS) for measuring the depth profile of the implanted species. Preliminary results are presented from annealing tests (not in the 72 MeV ion flux) at 1465 deg. C and 1650 deg. C at low and high concentrations of fission products. (author)

Tracking coherent structures in massively-separated and turbulent flows

Science.gov (United States)

Rockwood, Matthew; Huang, Yangzi; Green, Melissa

2018-01-01

Coherent vortex structures are tracked in simulations of massively-separated and turbulent flows. Topological Lagrangian saddle points are found using intersections of the positive and negative finite-time Lyapunov exponent ridges, and these points are then followed in order to track individual coherent structure motion both in a complex interacting three-dimensional flow (turbulent channel) and during vortex formation (two-dimensional bluff body shedding). For a simulation of wall-bounded turbulence in a channel flow, tracking Lagrangian saddles shows that the average structure convection speed exhibits a similar trend as a previously published result based on velocity and pressure correlations, giving validity to the method. When this tracking method is applied in a study of a circular cylinder in cross-flow it shows that Lagrangian saddles rapidly accelerate away from the cylinder surface as the vortex sheds. This saddle behavior is compared with the time-resolved static pressure distribution on the circular cylinder, yielding locations on a cylinder surface where common sensors could detect this phenomenon, which is not available from force measurements or vortex circulation calculations. The current method of tracking coherent structures yields insight into the behavior of the coherent structures in both of the diverse flows presented, highlighting the breadth of its potential application.

Extreme population inversion in the fragments formed by UV photoinduced S-H bond fission in 2-thiophenethiol.

Science.gov (United States)

Ingle, Rebecca A; Karsili, Tolga N V; Dennis, Gregg J; Staniforth, Michael; Stavros, Vasilios G; Ashfold, Michael N R

2016-04-28

H atom loss following near ultraviolet photoexcitation of gas phase 2-thiophenethiol molecules has been studied experimentally, by photofragment translational spectroscopy (PTS) methods, and computationally, by ab initio electronic structure calculations. The long wavelength (277.5 ≥ λ(phot) ≥ 240 nm) PTS data are consistent with S-H bond fission after population of the first (1)πσ* state. The partner thiophenethiyl (R) radicals are formed predominantly in their first excited Ã(2)A' state, but assignment of a weak signal attributable to H + R(X˜(2)A'') products allows determination of the S-H bond strength, D0 = 27,800 ± 100 cm(-1) and the Ã-X˜ state splitting in the thiophenethiyl radical (ΔE = 3580 ± 100 cm(-1)). The deduced population inversion between the à and X˜ states of the radical reflects the non-planar ground state geometry (wherein the S-H bond is directed near orthogonal to the ring plane) which, post-photoexcitation, is unable to planarise sufficiently prior to bond fission. This dictates that the dissociating molecules follow the adiabatic fragmentation pathway to electronically excited radical products. π* ← π absorption dominates at shorter excitation wavelengths. Coupling to the same (1)πσ* potential energy surface (PES) remains the dominant dissociation route, but a minor yield of H atoms attributable to a rival fragmentation pathway is identified. These products are deduced to arise via unimolecular decay following internal conversion to the ground (S0) state PES via a conical intersection accessed by intra-ring C-S bond extension. The measured translational energy disposal shows a more striking change once λ(phot) ≤ 220 nm. Once again, however, the dominant decay pathway is deduced to be S-H bond fission following coupling to the (1)πσ* PES but, in this case, many of the evolving molecules are deduced to have sufficiently near-planar geometries to allow passage through the conical intersection at extended S-H bond

Distribution of uranium in dental porcelains by means of the fission track method

International Nuclear Information System (INIS)

Shimizu, Masami; Noguchi, Kunikazu; Moriwaki, Kazunari; Sairenji, Eiko

1980-01-01

Porcelain teeth, some of which contain uranium compounds for aesthetic purpose, have been widely used in dental clinics. Hazardous effects due to uranium radiation have been suggested by recent publications. In the previous study, the authors reported the uranium content of porcelain teeth and radiation dose by it. In this study, using the fission track method, the authors examined spatial distribution of uranium in dental porcelain teeth (4 brands) which were marketed in Japan. From each sample of porcelain tooth, a 1-mm-thick specimen was sliced, and uranium content was measured at every 0.19 mm from labial side to lingual side for making a uranium distribution chart. Higher uranium concentration was found in Trubyte Bioblend porcelain teeth (USA) and they showed almost uniform distribution of uranium, while those of the Japanese three brands indicated, in most case, comparatively lower concentration and found to be non-uniform distributions. Range of uranium concentration in these brands were N.D. -- 5.2 ppm (Shofu-Ace), N.D. -- 342 ppm (Shofu-Real), N.D. -- 47 ppm (G.C. Livdent) and N.D. -- 235 ppm (Trubyte Bioblend), respectively. (author)

Refined open intersection numbers and the Kontsevich-Penner matrix model

Energy Technology Data Exchange (ETDEWEB)

Alexandrov, Alexander [Center for Geometry and Physics, Institute for Basic Science (IBS),Pohang 37673 (Korea, Republic of); Centre de Recherches Mathématiques (CRM), Université de Montréal,Montréal (Canada); Department of Mathematics and Statistics, Concordia University,Montréal (Canada); Institute for Theoretical and Experimental Physics (ITEP),Moscow (Russian Federation); Buryak, Alexandr [Department of Mathematics, ETH Zurich, Zurich (Switzerland); Tessler, Ran J. [Institute for Theoretical Studies, ETH Zurich,Zurich (Switzerland)

2017-03-23

A study of the intersection theory on the moduli space of Riemann surfaces with boundary was recently initiated in a work of R. Pandharipande, J.P. Solomon and the third author, where they introduced open intersection numbers in genus 0. Their construction was later generalized to all genera by J.P. Solomon and the third author. In this paper we consider a refinement of the open intersection numbers by distinguishing contributions from surfaces with different numbers of boundary components, and we calculate all these numbers. We then construct a matrix model for the generating series of the refined open intersection numbers and conjecture that it is equivalent to the Kontsevich-Penner matrix model. An evidence for the conjecture is presented. Another refinement of the open intersection numbers, which describes the distribution of the boundary marked points on the boundary components, is also discussed.

Refined open intersection numbers and the Kontsevich-Penner matrix model

International Nuclear Information System (INIS)

Alexandrov, Alexander; Buryak, Alexandr; Tessler, Ran J.

2017-01-01

A study of the intersection theory on the moduli space of Riemann surfaces with boundary was recently initiated in a work of R. Pandharipande, J.P. Solomon and the third author, where they introduced open intersection numbers in genus 0. Their construction was later generalized to all genera by J.P. Solomon and the third author. In this paper we consider a refinement of the open intersection numbers by distinguishing contributions from surfaces with different numbers of boundary components, and we calculate all these numbers. We then construct a matrix model for the generating series of the refined open intersection numbers and conjecture that it is equivalent to the Kontsevich-Penner matrix model. An evidence for the conjecture is presented. Another refinement of the open intersection numbers, which describes the distribution of the boundary marked points on the boundary components, is also discussed.

Pion-induced fission of 209Bi and 119Sn: measurements, calculations, analyses and comparison

International Nuclear Information System (INIS)

Rana, M.A.; Sher, G.; Manzoor, S.; Shehzad, M.I.

2011-01-01

Cross-sections for the π - -induced fission of 209 Bi and 119 Sn have been measured using the most sensitive CR-39 solid-state nuclear track detector. In experiments, target–detector stacks were exposed to negative pions of energy 500, 672, 1068, and 1665 MeV at the Brookhaven National Laboratory, USA. An important aspect of the present paper is the comparison of pion-induced fission fragment spectra of above mentioned nuclei with the spontaneous fission fragment spectra of 252 Cf. This comparison is made in terms of fission fragment track lengths in the CR-39 detectors. Measurement results are compared with calculations of Monte Carlo and statistical weight functions methods using the computer code CEM95. Agreement between measurements and calculations is fairly good for 209 Bi target nuclei whereas it is indigent for the case of 119 Sn. The possibilities of the trustworthy calculations, using the computer code CEM95, comparable with measurements of pion-induced fission in intermediate and heavy nuclei are explored by employing various systematics available in the code. Energy dependence of pion-induced fission in 119 Sn and 209 Bi is analyzed employing a newly defined parameter geometric-size-normalized fission cross-section (χ f g ). It is found that the collective nuclear excitations, which may lead to fission, become more probable for both 209 Bi and 119 Sn nuclei with increasing energy of negative pions from 500 to 1665 MeV. (author)

Fission theory and actinide fission data

Energy Technology Data Exchange (ETDEWEB)

Michaudon, A.

1975-06-01

The understanding of the fission process has made great progress recently, as a result of the calculation of fission barriers, using the Strutinsky prescription. Double-humped shapes were obtained for nuclei in the actinide region. Such shapes could explain, in a coherent manner, many different phenomena: fission isomers, structure in near-threshold fission cross sections, intermediate structure in subthreshold fission cross sections and anisotropy in the emission of the fission fragments. A brief review of fission barrier calculations and relevant experimental data is presented. Calculations of fission cross sections, using double-humped barrier shapes and fission channel properties, as obtained from the data discussed previously, are given for some U and Pu isotopes. The fission channel theory of A. Bohr has greatly influenced the study of low-energy fission. However, recent investigation of the yields of prompt neutrons and γ rays emitted in the resonances of {sup 235}U and {sup 239}Pu, together with the spin determination for many resonances of these two nuclei cannot be explained purely in terms of the Bohr theory. Variation in the prompt neutron and γ-ray yields from resonance to resonance does not seem to be due to such fission channels, as was thought previously, but to the effect of the (n,γf) reaction. The number of prompt fission neutrons and the kinetic energy of the fission fragments are affected by the energy balance and damping or viscosity effects in the last stage of the fission process, from saddle point to scission. These effects are discussed for some nuclei, especially for {sup 240}Pu.

Calculated fission properties of the heaviest elements

International Nuclear Information System (INIS)

Moeller, P.; Nix, J.R.; Swiatecki, W.J.

1986-09-01

A quantitative calculation is presented that shows where high-kinetic-energy symmetric fission occurs and why it is associated with a sudden and large decrease in fission half-lives. The study is based on calculations of potential-energy surfaces in the macroscopic-microscopic model and a semi-empirical model for the nuclear inertia. For the macroscopic part a Yukawa-plus-exponential model is used and for the microscopic part a folded-Yukawa single-particle potential is used. The three-quadratic-surface parameterization generates shapes for which the potential-energy surfaces are calculated. The use of this parameterization and the use of the finite-range macroscopic model allows for the study of two touching spheres and similar shapes. The results of the calculations in terms of potential-energy surfaces and fission half-lives are presented for heavy even nuclei. The surfaces are displayed in the form of contour diagrams as functions of two moments of the shape. 53 refs., 15 figs., 1 tab

New insights on the geological evolution of the continental margin of Southeastern Brazil derived from zircon and apatite (U-Th-Sm)/He and fission-track data

Science.gov (United States)

Krob, Florian; Stippich, Christian; Glasmacher, Ulrich A.; Hackspacher, Peter

2017-04-01

New insights on the geological evolution of the continental margin of Southeastern Brazil derived from zircon and apatite (U-Th-Sm)/He and fission-track data Krob, F.C.1, Stippich, C. 1, Glasmacher, U.A.1, Hackspacher, P.C.2 (1) Institute of Earth Sciences, Research Group Thermochronology and Archaeometry, Heidelberg University, INF 234, 69120, Heidelberg, Germany (2) Instituto de Geociências e Ciências Exatas, Universidade Estadual Paulista, Av. 24-A, 1515 Rio Claro, SP, 13506-900, Brazil Passive continental margins are important geoarchives related to mantle dynamics, the breakup of continents, lithospheric dynamics, and other processes. The main concern yields the quantifying long-term lithospheric evolution of the continental margin between São Paulo and Laguna in southeastern Brazil since the Neoproterozoic. We put special emphasis on the reactivation of old fracture zones running into the continent and their constrains on the landscape evolution. In this contribution, we represent already consisting thermochronological data attained by fission-track and (U-Th-Sm)/He analysis on apatites and zircons. The zircon fission-track ages range between 108.4 (15.0) and 539.9 (68.4) Ma, the zircon (U-Th-Sm)/He ages between 72.9 (5.8) and 427.6 (1.8) Ma whereas the apatite fission-track ages range between 40.0 (5.3) and 134.7 (8.0) Ma, and the apatite (U-Th-Sm)/He ages between 32.1 (1.52) and 92.0 (1.86) Ma. These thermochronological ages from metamorphic, sedimentary and intrusive rocks show six distinct blocks (Laguna, Florianópolis, Curitiba, Ilha Comprida, Peruibe and Santos) with different evolution cut by old fracture zones. Furthermore, models of time-temperature evolution illustrate the differences in Pre- to post-rift exhumation histories of these blocks. The presented data will provide an insight into the complex exhumation history of the continental margin based on the existing literature data on the evolution of the Paraná basin in Brazil and the latest

The Carboniferous to Jurassic evolution of the pre-Alpine basement of Crete: Constraints from U-Pb and U-(Th)-Pb dating of orthogneiss, fission-track dating of zircon, structural and petrological data

Czech Academy of Sciences Publication Activity Database

Romano, S. S.; Brix, M. R.; Dörr, K.; Fiala, Jiří; Krenn, E.; Zulauf, G.

2006-01-01

Roč. 260, - (2006), s. 69-90 ISSN 0375-6440 Institutional research plan: CEZ:AV0Z30130516 Keywords : tectonic-evolution * Carboniferous * Jurassic * uranium-lead-dating * orthogneiss * fission-track-dating * zircon * structural-geology * petrology * metamorphism * high-temperature Subject RIV: DB - Geology ; Mineralogy

Solid State Track Recorder fission rate measurements in low power light water reactor pressure vessel mockups

International Nuclear Information System (INIS)

Ruddy, F.H.; Roberts, J.H.; Kellogg, L.S.

1985-01-01

The results of extensive SSTR measurements made at the Pool Critical Assembly (PCA) facility at Oak Ridge National Laboratory have been reported previously. Measurements were made at key locations in PCA which is an idealized mockup of the water gap, thermal shield, pressure vessel geometry of a light water reactor. Recently, additional SSTR fission rate measurements have been carried out for 237-Np, 238-U, and 235-U in key locations in the NESTOR Shielding and Dosimetry Improvement Program (NESDIP) mockup facility located at Winfrith, England. NESDIP is a replica of the PCA facility, and comparisons will be made between PCA and NESDIP measurements. The results of measurements made at the engineering mockup at the VENUS critical assembly at CEN/SCK, Mol, Belgium will also be reported. Measurements were made at selected radial and azimuthal locations in VENUS, which models the in-core and near-core regions of a pressurized water reactor. Comparisons of absolute SSTR fission rates with absolute fission rates made with the Mol miniature fission chamber will be reported. Absolute fission rate comparisons have also been made between the NBS fission chamber, radiometric fission foils, and SSTRs, and these results will be summarized

Nuclear track radiography of 'hot' aerosol particles

Energy Technology Data Exchange (ETDEWEB)

Boulyga, S.F.; Kievitskaja, A.I.; Kievets, M.K.; Lomonosova, E.M.; Zhuk, I.V.; Yaroshevich, O.I.; Perelygin, V.P.; Petrova, R.; Brandt, R.; Vater, P

1999-06-01

Nuclear track radiography was applied to identify aerosol 'hot' particles which contain elements of nuclear fuel and fallout after Chernobyl NPP accident. For the determination of the content of transuranium elements in radioactive aerosols the measurement of the {alpha}-activity of 'hot' particles by SSNTD was used in this work, as well as radiography of fission fragments formed as a result of the reactions (n,f) and ({gamma},f) in the irradiation of aerosol filters by thermal neutrons and high energy gamma quanta. The technique allowed the sizes and alpha-activity of 'hot' particles to be determined without extracting them from the filter, as well as the determination of the uranium content and its enrichment by {sup 235}U, {sup 239}Pu and {sup 241}Pu isotopes. Sensitivity of determination of alpha activity by fission method is 5x10{sup -6} Bq per particle. The software for the system of image analysis was created. It ensured the identification of track clusters on an optical image of the SSNTD surface obtained through a video camera and the determination of size and activity of 'hot' particles00.

Influence of the cognitive workload on bicycle safety at four-legged intersections

DEFF Research Database (Denmark)

Kveladze, Irma; Agerholm, Niels

2018-01-01

is the influence of workload capacity on bicyclists spatial behaviour in a natural environment of four-legged intersections. Method: Due to the traffic safety of test participants, the study is divided in two phases. In the first phase, the actual physical environment of the four-legged intersection and bicyclists......-legged intersection. The eye tracking glasses will be used to make video and audio recording of visible field of where or how long bicyclists are allocating their visual attention while riding a bicycle and facing obstacles when crossing the four-legged intersection. On the second phase, a bicycle riding simulator...... riding task. This will allow to understand the allocation of bicyclists attention between primary and secondary tasks, to reveal the limit of the information processing capacity during biking. Results expected: Two experimental results will be incorporated to gain in-depth knowledge on bicycle accidents...

Multiple feature fusion via covariance matrix for visual tracking

Science.gov (United States)

Jin, Zefenfen; Hou, Zhiqiang; Yu, Wangsheng; Wang, Xin; Sun, Hui

2018-04-01

Aiming at the problem of complicated dynamic scenes in visual target tracking, a multi-feature fusion tracking algorithm based on covariance matrix is proposed to improve the robustness of the tracking algorithm. In the frame-work of quantum genetic algorithm, this paper uses the region covariance descriptor to fuse the color, edge and texture features. It also uses a fast covariance intersection algorithm to update the model. The low dimension of region covariance descriptor, the fast convergence speed and strong global optimization ability of quantum genetic algorithm, and the fast computation of fast covariance intersection algorithm are used to improve the computational efficiency of fusion, matching, and updating process, so that the algorithm achieves a fast and effective multi-feature fusion tracking. The experiments prove that the proposed algorithm can not only achieve fast and robust tracking but also effectively handle interference of occlusion, rotation, deformation, motion blur and so on.

SSNTD study of the probable influence of alpha activity on the mass distribution of sup 2 sup 5 sup 2 Cf fission fragments

CERN Document Server

Paul, D; Sastri, R C; Ghose, D

1999-01-01

The SSNTD has come a long way in its application for the study of nuclear phenomena. Spontaneous fission of transuranic elements is one such phenomena wherein use of SSNTD offers easy registration of the signature of the fission fragments. The object of the present study is to explore whether any one of the track parameters such as the diameter can be used to estimate the atomic mass ratios of the spontaneous fission fragments. The spontaneous fission data from sup 2 sup 5 sup 2 Cf recorded almost at the end of one and four half-life periods for alpha decay are analysed, taking a plot of the number of tracks versus the track diameter. From these plots it is seen that initially, when significant alpha activity of sup 2 sup 5 sup 2 Cf persists, the fission fragments appear to cluster into two predominant groups as indicated by two peaks. The ratio of the diameters at these peak positions appear to be related to the ratio of average mass numbers of the light and heavy groups of fission fragments. However, absenc...

Binary and ternary fission yields induced by 12C and 20Ne ions on 238U targets

International Nuclear Information System (INIS)

Otto, R.J.

1974-01-01

Evidence for ternary fission of 250 Cf* and 258 No* compound nuclei has been found. Relative cross section data for nuclides with masses between 24 Na and 161 Tb have been determined for 12 C bombardments of natural uranium at laboratory energies of 122 MeV, 113 MeV and 105 MeV. Relative cross section data for 8 nuclides between 24 Na and 66 Ni were sought for 20 Ne bombardments of natural uranium at 150 MeV laboratory energies. The binary fission fragment mass distribution for 238 U( 12 C,f) was determined by analysis of fission fragment recoil collection foils using radiochemical techniques and high resolution gamma ray spectroscopy. The results indicated the existence of a ternary fission branch similar to mass distributions obtained for He induced fission of Th, U, and Pu nuclei at intermediate energies. Comparison of the data with He induced ternary fission data obtained previously in this laboratory indicated an increase in the ternary fission probability with increasing Z 2 /A of the compound nucleus and with excitation energy. A shift of the binary-ternary fission product intersection point to lower mass numbers with increasing Z 2 /A and excitation energy of the compound nucleus was also observed. (Diss. Abstr. Int., B)

Multi-Modal Intersections: Resolving Conflicts between Trains, Motor Vehicles, Bicyclists and Pedestrians

Science.gov (United States)

2017-09-01

This research report investigates the relationship between pedestrians and bicyclists on paths parallel to railroad tracks and with a road perpendicular to the path. The possible conflicts at intersections within these design parameters are of concer...

Calculation of multidimensional potential energy surfaces for even-even transuranium nuclei: systematic investigation of the triaxiality effect on the fission barrier

Science.gov (United States)

Chai, Qing-Zhen; Zhao, Wei-Juan; Liu, Min-Liang; Wang, Hua-Lei

2018-05-01

Static fission barriers for 95 even-even transuranium nuclei with charge number Z = 94–118 have been systematically investigated by means of pairing self-consistent Woods-Saxon-Strutinsky calculations using the potential energy surface approach in multidimensional (β 2, γ, β 4) deformation space. Taking the heavier 252Cf nucleus (with the available fission barrier from experiment) as an example, the formation of the fission barrier and the influence of macroscopic, shell and pairing correction energies on it are analyzed. The results of the present calculated β 2 values and barrier heights are compared with previous calculations and available experiments. The role of triaxiality in the region of the first saddle is discussed. It is found that the second fission barrier is also considerably affected by the triaxial deformation degree of freedom in some nuclei (e.g., the Z=112–118 isotopes). Based on the potential energy curves, general trends of the evolution of the fission barrier heights and widths as a function of the nucleon numbers are investigated. In addition, the effects of Woods-Saxon potential parameter modifications (e.g., the strength of the spin-orbit coupling and the nuclear surface diffuseness) on the fission barrier are briefly discussed. Supported by National Natural Science Foundation of China (11675148, 11505157), the Project of Youth Backbone Teachers of Colleges and Universities of Henan Province (2017GGJS008), the Foundation and Advanced Technology Research Program of Henan Province (162300410222), the Outstanding Young Talent Research Fund of Zhengzhou University (1521317002) and the Physics Research and Development Program of Zhengzhou University (32410017)

Turning movements, vehicle offsets and ageing drivers driving behaviour at channelized and unchannelized intersections.

Science.gov (United States)

Choi, Jaisung; Tay, Richard; Kim, Sangyoup; Jeong, Seungwon

2017-11-01

Ageing drivers experience a higher risk of intersection crashes because of their decrease in driving efficiency, including the decline in cognitive ability, head and neck flexibility, and visual acuity. Although several studies have been conducted to examine the factors associated with ageing driver crashes at intersections, little research has been conducted to examine the differences in the factors related to ageing drivers' turning paths and intersection geometric features. This study aims to improve the safety of ageing drivers at intersections by identifying the maneuvers that are risky for them and tracking their turning movements at selected intersections. We find that ageing drivers experience more crashes at intersections than younger drivers, especially crashes involving turning movements. Furthermore, ageing drivers experience more crashes at unchannelized intersections compared to channelized intersections. In addition, this study finds that ageing drivers exhibit greater and more inconsistent offsets during turning movements compared to those of younger drivers at both channelized and unchannelized intersections. Ageing drivers also tend to make relatively sharper or tighter turns than younger drivers. Hence, transportation engineers and road safety professionals should consider appropriate countermeasures to reduce the risks of crashes involving ageing drivers at intersections. Copyright © 2017 Elsevier Ltd. All rights reserved.

Method of photo-etching and photogravure using fission fragment and/or alpha ray etch tracks from toned photographs

International Nuclear Information System (INIS)

Thackray, M.

1973-01-01

A method is described for reproducing a photographic image on a normally non-photo-receptive surface comprising the steps of: 1) toning the photograph with substances which combine with or replace the silver grains so that the photograph emits either spontaneously or indirectly fission fragments or alpha particles in amounts related to the distribution of the silver grains in the photograph; 2) placing the toned photograph contiguous with the surface on which the image is to be reproduced, for sufficient time for the emissions from the photograph to reproduce the image as a radiation-damage image on the surface, the damage areas having a close positional relationship to the silver grains in the original photograph. (author)

Influence of tracks densities in solid state nuclear track detectors

International Nuclear Information System (INIS)

Guedes O, S.; Hadler N.; Lunes, P.; Saenz T, C.

1996-01-01

When Solid State Nuclear Track Detectors (SSNTD) is employed to measure nuclear tracks produced mainly by fission fragments and alpha particles, it is considered that the tracks observation work is performed under an efficiency, ε 0 , which is independent of the track density (number of tracks/area unit). There are not published results or experimental data supporting such an assumption. In this work the dependence of ε 0 with track density is studied basing on experimental data. To perform this, pieces of CR-39 cut from a sole 'mother sheet' were coupled to thin uranium films for different exposition times and the resulting ratios between track density and exposition time were compared. Our results indicate that ε 0 is constant for track densities between 10 3 and 10 5 cm -2 . At our etching conditions track overlapping makes impossible the counting for densities around 1.7 x 10 5 cm -2 . For track densities less than 10 3 cm -2 , ε 0 , was not observed to be constant. (authors). 4 refs., 2 figs

Uranium content of coal ashes from Southern Brazil coal fueled power stations, by the fission track registration technique

International Nuclear Information System (INIS)

Morales, R.K.

1981-01-01

The feasibility of the application of the fission track registration technique for the determination of uranium in coal ashes was shown. The wet method was employed using as detector the Makrofol KG=10 μm, manufactured by Bayer. The coal ashes were originated from coal-fueled power stations localized in Southern Brazil. The results obtained ranged from 10 to 27 mg U/kg. Since the total error variation was from 18,4% to 23,8%, the method used was considered excellent. The determination of the uranium content in coal ashes is of considerable interest in environmental control in power stations, in their vicinity and wherever these ashes are used or stored. The technique used is the work proved to be very appropriate for the purpose aimed at. (Author) [pt

Geochronology and geochemistry by nuclear tracks method: some utilization examples in geologic applied

International Nuclear Information System (INIS)

Poupeau, G.; Soliani Junior, E.

1988-01-01

This article discuss some applications of the 'nuclear tracks method' in geochronology, geochemistry and geophysic. In geochronology, after rapid presentation of the dating principles by 'Fission Track' and the kinds of geological events mensurable by this method, is showed some application in metallogeny and in petroleum geolocy. In geochemistry the 'fission tracks' method utilizations are related with mining prospecting and uranium prospecting. In geophysics an important application is the earthquake prevision, through the Ra 222 emanations continous control. (author) [pt

Fission track dating of mesozoic sandstones and its tectonic significance in the Eastern Sichuan Basin, China

International Nuclear Information System (INIS)

Shen Chuanbo; Mei Lianfu; Xu Sihuang

2009-01-01

To establish the tectonic evolution of the eastern Sichuan basin, apatite fission track dating and time-temperature thermal history modeling were carried to analyze on 11 samples collected from Jurassic sandstones. The results indicate that the cooling and exhumation process of the eastern Sichuan basin can be divided into three stages since Cretaceous, (1) a rapid cooling phase between ∼100 and ∼70 Ma, (2) following by a period of relative thermal stability phase between ∼70 and ∼15 Ma, (3) and then a new rapid cooling stage after ∼15 Ma. Two rapid cooling events imply that the eastern Sichuan basin once underwent two tectonic movements since Cretaceous. The first rapid cooling is associated with Mesozoic tectonic reactivation beginning at 100 Ma, which result in folds and faults of the eastern Sichuan basin. The second tectonic movement occurred at 15 Ma, which is related to denudation by compression resulting from the eastward growth of Tibetan plateau uplift.

Summary of theory and techniques, sample selection and project organization for potassium-argon, rubidium-strontium and fission track dating and strontium isotope studies

International Nuclear Information System (INIS)

Adams, C.J.; Graham, I.J.; Seward, D.

1987-02-01

A brief outline is given of the theory and techniques of the potassium-argon, rubidium-strontium and fission-track dating methods and related isotope studies which are currently in use at the Institute of Nuclear Sciences, DSIR. Some limitations of each technique are set out in terms of age range and materials for dating, and the appropriate choice of various mineral and rock types and subsequent age interpretations are discussed. The organisation of project proposals and categories is described and procedures for sample submission and documentation are given

Ion track membranes providing heat pipe surfaces with capillary structures

International Nuclear Information System (INIS)

Akapiev, G.N.; Dmitriev, S.N.; Erler, B.; Shirkova, V.V.; Schulz, A.; Pietsch, H.

2003-01-01

The microgalvanic method for metal filling of etched ion tracks in organic foils is of particular interest for the fabrication of microsized structures. Microstructures like copper whiskers with a high aspect ratio produced in ion track membranes are suitable for the generation of high-performance heat transfer surfaces. A surface with good heat transfer characteristics is defined as a surface on which a small temperature difference causes a large heat transfer from the surface material to the liquid. It is well-known that a porous surface layer transfers to an evaporating liquid a given quantity of heat at a smaller temperature difference than does a usual smooth surface. Copper whiskers with high aspect ratio and a density 10 5 per cm 2 form such a porous structure, which produces strong capillary forces and therefore a maximum of heat transfer coefficients

Fission fragment angular distributions in proton-induced fission of 209Bi (p,f) and 197Au (p,f)

International Nuclear Information System (INIS)

Soheily, S.; Noshad, H.; Lamehi-Rashti, M.

2002-01-01

The fission fragment angular distributions have been measured for proton-induced fission of 209 B i and 197 A u nuclei using surface barrier detectors at several energies between 25 MeV and 30 MeV. The experimental anisotropies are found to be in agreement with the predictions of the Standard Saddle-Point Statistical Model. The fission cross sections of 209 B i and 197 A u nuclei were also measured and compared with the previous works

Fission mass yields of excited medium heavy nuclei

International Nuclear Information System (INIS)

Sandulescu, A.; Depta, K.; Herrmann, R.; Greiner, W.; Scheid, W.

1985-01-01

The mass distributions resulting from the fission of excited medium mass nuclei are discussed on the basis of the fragmentation theory. It is shown that very asymmetric fission events can be expected with rates which are only a few orders of magnitude smaller than the rates for symmetric fission. As an example a calculation of the fission mass distribution of the excited 172 Yb compound nucleus is presented. This mass distribution reveals observable structures over the entire range of the mass asymmetry due to valleys in the potential energy surface for fission fragments with closed proton and neutron shells

RIBD-IRT, Isotope Buildup and Isotope Decay from Fission Source

International Nuclear Information System (INIS)

1990-01-01

1 - Description of problem or function: RIBD-IRT calculates isotopic concentrations resulting from two fission sources with normal down- chain decay by beta emission and isomeric transfers and inter-chain coupling resulting from (n,gamma) reactions. Calculations can be made to follow an irradiation history through an unlimited number of step changes of unrestricted duration and variability including shutdown periods, restarts at different power levels and/or any other level changes. In addition, the program permits to track and modify the concentration of individual elements as they decay with time following reactor shutdown. Tracking individual elements enables one to estimate time-dependent source terms for a hypothetical LOCA based on known or postulated fission product release mechanisms. 2 - Method of solution: RIBD-IRT is a grid processor. It organizes the various members described by the fission product library data into a grid with the various linkages established from chain branching data, yield data, and neutron capture cross sections with their branching ratios. Radioactive decay includes not only the simple member-to-member cascade but also the more complex forms where branching may be partially or completely skip one or two intervening members

Fission-track dating of South American natural glasses: an overview

Energy Technology Data Exchange (ETDEWEB)

Bigazzi, G. [Istituto di Geoscienze e Georisorse, C.N.R., Via G. Moruzzi, 1, 56124 Pisa (Italy)]. E-mail: g.bigazzi@igg.cnr.it; Hadler Neto, J.C. [Instituto de Fisica Gleb Wataghin, Universidade Estadual de Campinas, UNICAMP, 13083-970 Campinas SP (Brazil); Iunes, P.J. [Instituto de Fisica Gleb Wataghin, Universidade Estadual de Campinas, UNICAMP, 13083-970 Campinas SP (Brazil); Osorio Araya, A.M. [Departamento de Fisica, Quimica e Biologia, Universidade do Estado de Sao Paulo, UNESP, 19060-900 Presidente Prudente SP (Brazil)

2005-12-01

Although many glass-bearing horizons can be found in South American volcanic complexes or sedimentary series, only a relatively few tephra and obsidian-bearing volcanic fields have been studied using the fission-track (FT) dating method. Among them, the volcanics located in the Sierra de Guamani (east of Quito, Ecuador) were studied by several authors. Based upon their ages, obsidians group into three clusters: (1) very young obsidians, {approx}0.2Ma old (2) intermediate-age obsidians, {approx}0.4-{approx}0.8Ma old, and (3) older obsidians, {approx}1.4-{approx}1.6Ma old. The FT method is also an efficient alternative technique for identification of the sources of prehistoric obsidian artefacts. Provenance studies carried out in South America have shown that the Sierra de Guamani obsidian occurrences were important sources of raw material for tool making during pre-Columbian times. Glasses originated from these sources were identified in sites distributed over relatively wide areas of Ecuador and Colombia. Only a few systematic studies on obsidians in other sectors were carried out. Nevertheless, very singular glasses have been recognised in South America, such as Macusanite (Peru) and obsidian Quiron (Argentina), which are being proposed as additional reference materials for FT dating. Analyses of tephra beds interstratified with sedimentary deposits revealed the performance of FT dating in tephrochronological studies. A remarkable example is the famous deposit outcropping at Farola Monte Hermoso, near Bahia Blanca (Buenos Aires Province), described for the first time by the middle of the 19th century by Charles Darwin. Considering the large number of volcanic glasses that were recognised in volcanic complexes and in sedimentary series, South America is a very promising region for the application of FT dating. The examples given above show that this technique may yield important results in different disciplinary fields.

Fission-track dating of South American natural glasses: an overview

International Nuclear Information System (INIS)

Bigazzi, G.; Hadler Neto, J.C.; Iunes, P.J.; Osorio Araya, A.M.

2005-01-01

Although many glass-bearing horizons can be found in South American volcanic complexes or sedimentary series, only a relatively few tephra and obsidian-bearing volcanic fields have been studied using the fission-track (FT) dating method. Among them, the volcanics located in the Sierra de Guamani (east of Quito, Ecuador) were studied by several authors. Based upon their ages, obsidians group into three clusters: (1) very young obsidians, ∼0.2Ma old (2) intermediate-age obsidians, ∼0.4-∼0.8Ma old, and (3) older obsidians, ∼1.4-∼1.6Ma old. The FT method is also an efficient alternative technique for identification of the sources of prehistoric obsidian artefacts. Provenance studies carried out in South America have shown that the Sierra de Guamani obsidian occurrences were important sources of raw material for tool making during pre-Columbian times. Glasses originated from these sources were identified in sites distributed over relatively wide areas of Ecuador and Colombia. Only a few systematic studies on obsidians in other sectors were carried out. Nevertheless, very singular glasses have been recognised in South America, such as Macusanite (Peru) and obsidian Quiron (Argentina), which are being proposed as additional reference materials for FT dating. Analyses of tephra beds interstratified with sedimentary deposits revealed the performance of FT dating in tephrochronological studies. A remarkable example is the famous deposit outcropping at Farola Monte Hermoso, near Bahia Blanca (Buenos Aires Province), described for the first time by the middle of the 19th century by Charles Darwin. Considering the large number of volcanic glasses that were recognised in volcanic complexes and in sedimentary series, South America is a very promising region for the application of FT dating. The examples given above show that this technique may yield important results in different disciplinary fields

Fission-gas-bubble mobility in oxide fuel: a critical analysis

International Nuclear Information System (INIS)

Tam, S.W.; Johnson, C.E.

1983-08-01

The available volatile fission product release data has confirmed the general viability of the scaling model of volatile fission product release in which the fractional release rates of the volatile fission products scale as that of the fission gas. The question of whether fission gas bubbles can move sufficiently fast to be a significant mechanism responsible for fission gas release from the fuel is considered. The mean jump distance per jump of the hopping process in gas bubble motion is analyzed. Surface roughness is also considered

Chemical effects of fission recoils

International Nuclear Information System (INIS)

Meisels, G.G.; Freeman, J.P.; Gregory, J.P.; Richardson, W.C.; Sroka, G.J.

1978-01-01

The production of nitrogen from nitrous oxide at high density was employed to investigate the energy deposition efficiency of fission recoils produced from fission of U 235 in uranium-palladium foils clad with platinum. Nitrogen production varied linearly with fission recoil dose from 1.1 x 10 20 to 9.0 x 10 20 eV, and was independent of density between 12.5 and 127.5 g l -1 N 2 O. 16.2 +- 0.8% of the fission recoil energy was deposited external to the foil. Electron microprobe analysis showed some unevenness of new foil and polymer buildup on the surface after irradiation of ethylene-oxygen mixtures. Subsequent irradiation in the presence of nitrous oxide restored some of the original efficiency. This is ascribed to chemical oxidation of the polymer induced by reactive intermediates produced from nitrous oxide. (author)

Monte-Carlo Generation of Time Evolving Fission Chains

Energy Technology Data Exchange (ETDEWEB)

Verbeke, Jerome M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kim, Kenneth S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Prasad, Manoj K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Snyderman, Neal J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2013-08-01

About a decade ago, a computer code was written to model neutrons from their “birth” to their final “death” in thermal neutron detectors (³He tubes): SrcSim had enough physics to track the neutrons in multiplying systems, appropriately increasing and decreasing the neutron population as they interacted by absorption, fission and leakage. The theory behind the algorithms assumed that all neutrons produced in a fission chain were all produced simultaneously, and then diffused to the neutron detectors. For cases where the diffusion times are long compared to the fission chains, SrcSim is very successful. Indeed, it works extraordinarily well for thermal neutron detectors and bare objects, because it takes tens of microseconds for fission neutrons to slow down to thermal energies, where they can be detected. Microseconds are a very long time compared to the lengths of the fission chains. However, this inherent assumption in the theory prevents its use to cases where either the fission chains are long compared to the neutron diffusion times (water-cooled nuclear reactors, or heavily moderated object, where the theory starts failing), or the fission neutrons can be detected shortly after they were produced (fast neutron detectors). For these cases, a new code needs to be written, where the underlying assumption is not made. The purpose of this report is to develop an algorithm to generate the arrival times of neutrons in fast neutron detectors, starting from a neutron source such as a spontaneous fission source (²⁵²Cf) or a multiplying source (Pu). This code will be an extension of SrcSim to cases where correlations between neutrons in the detectors are on the same or shorter time scales as the fission chains themselves.

Efficiency calibration of solid track spark auto counter

International Nuclear Information System (INIS)

Wang Mei; Wen Zhongwei; Lin Jufang; Liu Rong; Jiang Li; Lu Xinxin; Zhu Tonghua

2008-01-01

The factors influencing detection efficiency of solid track spark auto counter were analyzed, and the best etch condition and parameters of charge were also reconfirmed. With small plate fission ionization chamber, the efficiency of solid track spark auto counter at various experiment assemblies was re-calibrated. The efficiency of solid track spark auto counter at various experimental conditions was obtained. (authors)

Neutron activation analysis of uranium by means of electrochemical etching of tracks in lawsan detectors

International Nuclear Information System (INIS)

Kim Son Chun; Chuburkov, Yu.T.; Zvara, I.I.

1982-01-01

The method of neutron activation analysis of uranium in natural and artificial materials using track lavsan detectors of fission fragments has been developed. The method of electrochemical etching (etching reagent NaOH) of fragment tracks in lavsan is improved. Using statistical method of experiment planning the equation, describing the dependence of diometer value of fission fragment tracks on parameters of etching process, is obtained. The analysis sensitivity is 10 - 7 g/g - 10 - 8 g/g

Multiphase flow in geometrically simple fracture intersections

Science.gov (United States)

Basagaoglu, H.; Meakin, P.; Green, C.T.; Mathew, M.; ,

2006-01-01

A two-dimensional lattice Boltzmann (LB) model with fluid-fluid and solid-fluid interaction potentials was used to study gravity-driven flow in geometrically simple fracture intersections. Simulated scenarios included fluid dripping from a fracture aperture, two-phase flow through intersecting fractures and thin-film flow on smooth and undulating solid surfaces. Qualitative comparisons with recently published experimental findings indicate that for these scenarios the LB model captured the underlying physics reasonably well.

Track sensitivity and the surface roughness measurements of CR-39 with atomic force microscope

CERN Document Server

Yasuda, N; Amemiya, K; Takahashi, H; Kyan, A; Ogura, K

1999-01-01

Atomic Force Microscope (AFM) has been applied to evaluate the surface roughness and the track sensitivity of CR-39 track detector. We experimentally confirmed the inverse correlation between the track sensitivity and the roughness of the detector surface after etching. The surface of CR-39 (CR-39 doped with antioxidant (HARZLAS (TD-1)) and copolymer of CR-39/NIPAAm (TNF-1)) with high sensitivity becomes rough by the etching, while the pure CR-39 (BARYOTRAK) with low sensitivity keeps its original surface clarity even for the long etching.

Straight-Line Target Tracking for Unmanned Surface Vehicles

Directory of Open Access Journals (Sweden)

Morten Breivik

2008-10-01

Full Text Available This paper considers the subject of straight-line target tracking for unmanned surface vehicles (USVs. Target-tracking represents motion control scenarios where no information about the target behavior is known in advance, i.e., the path that the target traverses is not defined apriori. Specifically, this work presents the design of a motion control system which enables an underactuated USV to track a target that moves in a straight line at high speed. The motion control system employs a guidance principle originally developed for interceptor missiles, as well as a novel velocity controller inspired by maneuverability and agility concepts found in fighter aircraft literature. The performance of the suggested design is illustrated through full-scale USV experiments in the Trondheimsfjord.

Resolving the age of the first-order topography of southern Africa: new insight from joint (U-Th)/He and fission track dating of samples from deep boreholes

Science.gov (United States)

Beucher, R.; Brown, R. W.; Persano, C.; Stuart, F.; Gallagher, K.

2011-12-01

and to quantify the dispersion of single crystal ages. The shallowest borehole is 0.8 km and the deepest is 1.6, with most of them deeper than one kilometer. A spatial pattern is clearly evidenced with boreholes located above the escarpment showing older ages those located below. Thermal history inversion was performed using QTQt that enables a joint modelling of AHe, AFTA and fission track lengths. The data provide robust well-constrained evidence for a major period of cooling during the late Cretaceous (circa 90 Ma). From local measurement of the geothermal gradient and estimation of palaeo-thermal gradient we show that these data are best explained by an erosion event which could have led to removal of about 3.5 kilometers in the central part of the plateau. These estimates agree with the offshore sedimentary records on the eastern craton margin. We discuss the perspectives offered by joint analyses of thermochronological data and the utilization of surface erosion models based on CASCADE to provide new insight into south-African uplift and role of mantle dynamics.

Studies of Fission-Induced Surface Damage in Actinides Using Ultracold Neutrons

Energy Technology Data Exchange (ETDEWEB)

Broussard, Leah J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2014-03-05

This report describes the results of the fission-induced actinide studies at LANL. Previously, there was no fission data at these energies though there were initial characterizations of UCN energy dependence and material thickness. The proof of principle was demonstrated and the initial characterizations of sputtered rates, angular and size distribution are underway.

Predicting crash-relevant violations at stop sign-controlled intersections for the development of an intersection driver assistance system.

Science.gov (United States)

Scanlon, John M; Sherony, Rini; Gabler, Hampton C

2016-09-01

Intersection crashes resulted in over 5,000 fatalities in the United States in 2014. Intersection Advanced Driver Assistance Systems (I-ADAS) are active safety systems that seek to help drivers safely traverse intersections. I-ADAS uses onboard sensors to detect oncoming vehicles and, in the event of an imminent crash, can either alert the driver or take autonomous evasive action. The objective of this study was to develop and evaluate a predictive model for detecting whether a stop sign violation was imminent. Passenger vehicle intersection approaches were extracted from a data set of typical driver behavior (100-Car Naturalistic Driving Study) and violations (event data recorders downloaded from real-world crashes) and were assigned weighting factors based on real-world frequency. A k-fold cross-validation procedure was then used to develop and evaluate 3 hypothetical stop sign warning algorithms (i.e., early, intermediate, and delayed) for detecting an impending violation during the intersection approach. Violation detection models were developed using logistic regression models that evaluate likelihood of a violation at various locations along the intersection approach. Two potential indicators of driver intent to stop-that is, required deceleration parameter (RDP) and brake application-were used to develop the predictive models. The earliest violation detection opportunity was then evaluated for each detection algorithm in order to (1) evaluate the violation detection accuracy and (2) compare braking demand versus maximum braking capabilities. A total of 38 violating and 658 nonviolating approaches were used in the analysis. All 3 algorithms were able to detect a violation at some point during the intersection approach. The early detection algorithm, as designed, was able to detect violations earlier than all other algorithms during the intersection approach but gave false alarms for 22.3% of approaches. In contrast, the delayed detection algorithm sacrificed

Temporal constraints on the tectonic evolution of Sierra De Famatina, northwestern Argentina, using the fission-track method to date tuffs interbedded in synorogenic clastic sedimentary strata

Energy Technology Data Exchange (ETDEWEB)

Tabbutt, K.D. (Dartmouth College, Hanover, NH (USA))

1990-07-01

Fission-track dates from seven volcaniclastic units allow time constraints to be placed on synorogenic clastic strata exposed along the flanks of Sierra de Famatina, northwest Argentina. Four formations are exposed along the western margin of Sierra de Famatina. The El Abra conglomerate is composed of clasts eroded from the basement exposed just to the west of Cadena de Paiman. The El Buey Formation contains sediments probably derived from the Precordillera fold and thrust belt to the west. Fission-track dates give a maximum age of 6 Ma for the deposition of both of these formations. The El Durazno Formation, deposited between 6 and 4 Ma, contains proximal volcaniclastic and other clastic rocks derived from the core of Sierra de Famatina. The Santa Florentina conglomerate was derived from the rising Sierra de Famatina and deposited in the past 4 m.y. Sierra de Famatima probably became a positive topographic feature approximately 6 Ma. Prior to that time this region was receiving fine-grained sediments from a distal fold and thrust belt and conglomerates from local basement uplifts. Minor extrusive events (Mogote Formation) coincide both spatially and temporally with deformation along the major reverse faults that control the uplift of Sierra de Famatina. Minimum mean uplift rates calculated for Sierra de Famatina are 0.8 {plus minus} 0.1 mm/yr over a 6.8 m.y. interval.

Use of 236Pu and 242Pu as a radiochemical tracer for estimation of Pu in bioassay samples by fission track analysis

International Nuclear Information System (INIS)

Sawant, Pramilla D.; Prabhu, Supreetha P.; Kalsi, P.C.

2008-01-01

236 Pu and 242 Pu are routinely used as radiochemical yield monitors in India for bioassay monitoring of occupational workers by alpha spectrometry. Fission Track Analysis (FTA) is also being standardized for trace level determination of Pu in bioassay samples. The present study, reports the utility of 236 Pu and 242 Pu as radiochemical tracers in estimation of Pu in bioassay samples by FTA technique. The advantages of using 236 Pu tracer in FTA over 242 Pu as well as the interference caused due to presence of 241 Pu in the bioassay samples of occupational workers handling power reactor grade Pu is discussed. (author)

Cross section of ternary fission of Al, Ti, Co and Zr nuclei induced by 0,8 - 1,8 Gev photons

International Nuclear Information System (INIS)

Lima, D.A. de; Sousa, E.V. de; Milomen, W.C.C.; Tavares, O.A.P.

1988-01-01

A research on ternary fission of Al, Ti, Co, and Zr nuclei induced by bremsstrahlung photons of 0,8, 1,0, 1,4, and 1,8 Gev end-point energies has been carried out using makrofol polycarbonate and CR-39 polymer as fission-track detectors. Results are discussed and compared with other ternary fission data. (M.W.O.) [pt

Procedures for the use of Lexan and Makrofol SSNTDs in the detection of environmental concentrations of 235U and 239Pu

International Nuclear Information System (INIS)

Henderson, C.L.

1993-03-01

Solid State Nuclear Track Detectors are used to study a variety of atomic particles. Polycarbonate SSNTD is used to study environmental concentrations of 235 U and 239 Pu in human urine and feces through fission track analysis. The samples of interest are deposited upon a Lexan slide, covered with a piece of Makrofol and exposed to a neutron fluence of 1.1 X 10 17 . The fissile isotopes in the sample fission and the resulting fission fragments pass through either the surface of the Lexan or the surface of the Makrofol. The positive Coulombic attraction of the ionized fission fragments causes the electrons of the polycarbonate lattice to move towards the path of these particles, resulting in the breakage of chemical bonds in the lattice. The detector is then chemically etched in 6.5 N KOH that preferentially dissolves the damaged polycarbonate left in the path of the fission fragment. The chemically etched fission tracks are permanent records of the path of the fission fragment. The etched fission tracks in Lexan are optically counted using a microscope and the fission tracks in Makrofol are counted using a Spark Chamber. The amount of fissile material in the original sample can be calculated from the number of fission tracks. This paper presents further details of procedures for etching fission tracks in Lexan and Makrofol and for operating a Spark Chamber to count etched fission tracks in Makrofol. The physics of fission track formation in dielectric detectors is also discussed, as well as the physics of the Spark Chamber

Thermodynamics of nuclear track chemical etching

Science.gov (United States)

Rana, Mukhtar Ahmed

2018-05-01

This is a brief paper with new and useful scientific information on nuclear track chemical etching. Nuclear track etching is described here by using basic concepts of thermodynamics. Enthalpy, entropy and free energy parameters are considered for the nuclear track etching. The free energy of etching is determined using etching experiments of fission fragment tracks in CR-39. Relationship between the free energy and the etching temperature is explored and is found to be approximately linear. The above relationship is discussed. A simple enthalpy-entropy model of chemical etching is presented. Experimental and computational results presented here are of fundamental interest in nuclear track detection methodology.

Number-Theory in Nuclear-Physics in Number-Theory: Non-Primality Factorization As Fission VS. Primality As Fusion; Composites' Islands of INstability: Feshbach-Resonances?

Science.gov (United States)

Siegel, Edward

2011-10-01

Numbers: primality/indivisibility/non-factorization versus compositeness/divisibility /factor-ization, often in tandem but not always, provocatively close analogy to nuclear-physics: (2 + 1)=(fusion)=3; (3+1)=(fission)=4[=2 × 2]; (4+1)=(fusion)=5; (5 +1)=(fission)=6[=2 × 3]; (6 + 1)=(fusion)=7; (7+1)=(fission)=8[= 2 × 4 = 2 × 2 × 2]; (8 + 1) =(non: fission nor fusion)= 9[=3 × 3]; then ONLY composites' Islands of fusion-INstability: 8, 9, 10; then 14, 15, 16,... Could inter-digit Feshbach-resonances exist??? Applications to: quantum-information/computing non-Shore factorization, millennium-problem Riemann-hypotheses proof as Goodkin BEC intersection with graph-theory ``short-cut'' method: Rayleigh(1870)-Polya(1922)-``Anderson'' (1958)-localization, Goldbach-conjecture, financial auditing/accounting as quantum-statistical-physics;... abound!!!

Types of intersections.

NARCIS (Netherlands)

2015-01-01

There are many types of intersections in the Netherlands. In an inherently safe road traffic system, however, the number of intersection types needs to be limited, depending on the road types that intersect. The desired types of intersections do not always correspond with the recommendations in the

Fission fragment mass and total kinetic energy distributions of spontaneously fissioning plutonium isotopes

Science.gov (United States)

Pomorski, K.; Nerlo-Pomorska, B.; Bartel, J.; Schmitt, C.

2018-03-01

The fission-fragment mass and total kinetic energy (TKE) distributions are evaluated in a quantum mechanical framework using elongation, mass asymmetry, neck degree of freedom as the relevant collective parameters in the Fourier shape parametrization recently developed by us. The potential energy surfaces (PES) are calculated within the macroscopic-microscopic model based on the Lublin-Strasbourg Drop (LSD), the Yukawa-folded (YF) single-particle potential and a monopole pairing force. The PES are presented and analysed in detail for even-even Plutonium isotopes with A = 236-246. They reveal deep asymmetric valleys. The fission-fragment mass and TKE distributions are obtained from the ground state of a collective Hamiltonian computed within the Born-Oppenheimer approximation, in the WKB approach by introducing a neck-dependent fission probability. The calculated mass and total kinetic energy distributions are found in good agreement with the data.

Fission 2009 4. International Workshop on Nuclear Fission and Fission Product Spectroscopy - Compilation of slides

International Nuclear Information System (INIS)

2009-01-01

This conference is dedicated to the last achievements in experimental and theoretical aspects of the nuclear fission process. The topics include: mass, charge and energy distribution, dynamical aspect of the fission process, nuclear data evaluation, quasi-fission and fission lifetime in super heavy elements, fission fragment spectroscopy, cross-section and fission barrier, and neutron and gamma emission. This document gathers the program of the conference and the slides of the presentations

Geochronologic (K-Ar/Fission track) east-west profile of the Rio Grande do Sul shield

International Nuclear Information System (INIS)

Poupeau, G.; Baitelli, R.; Berbert, M.

1985-01-01

An E-W sampling was executed from Pelotas to Dom Pedrito, Rio Grande do Sul state, for K-Ar and Fission-track (FT) dating. Within the Dom Feliciano Orogenic Belt, from pelotas to Pinheiro Machado, K-Ar in biotites increase from 530m.y. to 655 m.y., with a discontinuity at the level of the approx.10Km wide Cangacu cataclastic Zone. In two samples from the Rio de La Plata Craton, at the western end of our profile, hornblendes present K-Ar ages of 1.555m.y. and 1.594m.y. FT ages in apatites record cooling of these minerals below 120 + - 20 0 C. From Pelotas to Pinheiro Machado, four sample present concordant ages at 270 + - 10m.y., whiel western most sample records a later event at 216 m.y. From the structure of plateau-ages it is suggested that the events dated are two positive tectonic pulses. Examination of the sedimentary of the Parana Basin confirms this interpretation. We therefore dated isotopically, for the firts time in Rio Grande do Sul basement, the ages of the two tectonic pulses wich affected the sedimentation in the Parana Basin. (Author) [pt

Geochronologic (K-Ar/Fission Track) east-west profile of the Rio Grande do Sul shield

International Nuclear Information System (INIS)

Poupeau, G.; Baitelli, R.; Berbert, M.; Kawashita, K.

1985-01-01

An E-W sampling was executed from Pelotas to Dom Pedrito, Rio Grande do Sul State, for K-Ar and fission-track (FT) dating. Within the Dom Feliciano Orogenic Belt, from Pelotas to Pinheiro Machado, K-Ar in biotites increase from 530 m.y. to 655 m.y., with a discontinuity at the level of the 10 km wide Cangacu cataclastic Zone. In two samples from the Rio de La Plata Craton, at the Western end of our profile, hornblendes present K-Ar ages of 1.555 m.y and 1.594 m.y. FT ages in apatites record the cooling of these minerals below 120+- 20 0 C. From Pelotas to Pinheiro Machado, four samples present concordant ages at 270+ -10 m.y., while the western sample records a later event at 216 m.y. From the structure of plateau-ages it is suggested that the events dated are two positive tectonic pulses. Examination of the sedimentary of the Parana Basin confirms this interpretation. We therefore dated isotopically, for the first time in Rio Grande do Sul basement, the ages of the two tectonic pulses which affected the sedimentation in the Parana Basin. (Author) [pt

Assessment of plutonium exposures in Rongelap and Utirik populations by fission track analysis of urine

International Nuclear Information System (INIS)

Sun, L.C.; Moorthy, A.R.; Kaplan, E.; Baum, J.W.; Meinhold, C.B.

1994-01-01

A nuclear device, code-named Bravo, detonated at Bikini Atoll at 6:45 a.m. on 1 March 1954, unexpectedly released a large amount of radioactivity. Over 40 years after this incident, the study of its impact on the radiological health and environmental safety of the residents of Rongelap and Utirik Atolls continues. In 1987, researchers at Brookhaven National Laboratory established a fission track analysis (FTA) method for low-level 239 Pu urinalysis. Two years later, a new shipboard protocol was developed for collecting 24-h radiologically clean urine samples. The purpose of this paper is to update information on the FTA method for measuring low-levels of plutonium, and to summarize results on the distribution of 239 Pu in the populations of Rongelap and Utirik between 1981--1991. Plutonium detection levels (99% confidence level) in these samples were 2--3 μBq, which is equivalent to 0.2--0.3 mSv effective dose equivalent (EDE) to age 70 for Marshallese. The latest 1991 FTA data indicate average EDE of 0.62 mSv and 1.6 mSv for the people of Rongelap and Utirik, respectively, which both are the highest values since 1988

Assessment of plutonium exposures in Rongelap and Utirik populations by fission track analysis of urine

International Nuclear Information System (INIS)

Sun, L.C.; Moorthy, A.R.; Kaplan, E.; Baum, J.W.; Meinhold, C.B.

1995-01-01

A nuclear device, code-named Bravo, detonated at Bikini Atoll at 6.45 a.m. on 1 March 1954, unexpectedly released a large amount of radioactivity. Over 40 years after this incident, the study of its impact on the radiological health and environmental safety of the residents of Rongelap and Utirik Atolls continues. In 1987, researchers at Brookhaven National Laboratory established a fission track analysis (FTA) method for low-level 239 Pu urinalysis. Two years later, a new shipboard protocol was developed for collecting 24-h radiologically clean urine samples. The purpose of this paper is to update information on the FTA method for measuring low-levels of plutonium, and to summarize results on the distribution of 239 Pu in the populations of Rongelap and Utirik between 1981-1991. Plutonium detection levels (99% confidence level) in these samples were 2-3 μBq, which is equivalent to 0.2-0.3 mSv effective dose equivalent (EDE) to age 70 for Marshallese. The latest 1991 FTA data indicate average EDE of 0.62 mSv and 1.6 mSv for the people of Rongelap and Utirik, respectively, which both are the highest values since 1988. (author)

Nuclear fission and neutron-induced fission cross-sections

Energy Technology Data Exchange (ETDEWEB)

James, G.D.; Lynn, J.E.; Michaudon, A.; Rowlands, J.; de Saussure, G.

1981-01-01

A general presentation of current knowledge of the fission process is given with emphasis on the low energy fission of actinide nuclei and neutron induced fission. The need for and the required accuracy of fission cross section data in nuclear energy programs are discussed. A summary is given of the steps involved in fission cross section measurement and the range of available techniques. Methods of fission detection are described with emphasis on energy dependent changed and detector efficiency. Examples of cross section measurements are given and data reduction is discussed. The calculation of fission cross sections is discussed and relevant nuclear theory including the formation and decay of compound nuclei and energy level density is introduced. A description of a practical computation of fission cross sections is given.

Grounded Intersectionality

DEFF Research Database (Denmark)

Marfelt, Mikkel Mouritz

2016-01-01

associated with intersectional research. The findings assist in positioning the proposed methodological framework within recent intersectional debates. Findings – The review shows a rise in intersectional publications since the birth of the “intersectionality” term in 1989. Moreover, the paper points to four...... oriented but still emphasizes stable concepts. Moreover, it does not give primacy to oppression. Finally, it adopts a critical stance on the nature of the macro, meso, and micro levels as dominant analytical perspectives. As a result, this paper focusses on the importance of intersectionality...

Theoretical analysis of knock-out release of fission products from nuclear fuels

International Nuclear Information System (INIS)

Yamagishi, S.

1975-01-01

The knock-out release of fission products is studied theoretically. The general equations of knock-out release are derived, assuming that a fission fragment passing through the surface of nuclear fuels knocks out a local region of the surface with an effective thickness and an effective cross-sectional area. Using these equations, the knock-out release of fission gases is calculated for various cases. The conditions under which the knock-out coefficients (the average number of uranium atoms knocked out by one fission fragment) is obtainable are clarified by experiments on the knock-out release of fission gases. A method of determining the effective thickness and the effective cross-sectional area of a knock-out region is proposed. (Auth.)

Asymptotic properties of axisymmetric Stokes flow of a viscous liquid with intersecting boundaries

International Nuclear Information System (INIS)

Voinov, O.V.

2004-01-01

The general axisymmetric problem on the liquid flow by the low Reynolds number when the boundary surfaces (both of the solid body and free one) are intersecting at the certain angle on the moving line, is considered. The work is aimed at establishing the asymptotic regularities of the behavior of the current function and voltages in the small vicinity of the intersection (contact) line of the boundary surfaces. The asymptotic analysis makes it possible to consider the arbitrary axisymmetric Stokes flow with the intersecting boundaries [ru

Comparison of fission probabilities with emission of long range particles under the action of slow and fast neutrons on various materials; Probabilites comparees de fission avec emission de particules de long parcours pour divers materiaux sous l'action des neutrons lents et rapides

Energy Technology Data Exchange (ETDEWEB)

Netter, F; Faraggi, H; Garin-Bonnet, A; Julien, J; Corge, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Turkiewicz, J [Institut de Recherches Nucleaire de Varsovie (Poland)

1958-07-01

The authors describe relative cross-section measurements of fission of the isotopes of uranium and plutonium (more particularly {sup 235}U, {sup 238}U, {sup 239}Pu), with emission of long range particles, under the action of neutrons of various energies: thermal neutrons, pile neutrons, neutrons produced with the Van de Graaff accelerator by reaction of protons on tritium. The measurements are carried out: 1) with the aid of photographic plates, by submitting to the action of the neutrons a layer of fissile material coupled with an Ilford nuclear emulsion of 200 microns; a tin sheet laying between the plate and the layer stops the {alpha} particles and the fission fragments. By an appropriate development the tracks of the long range particles can be distinguished in the emulsion, from the tracks of the recoil protons resulting of fission neutrons, or of the last primary neutrons. For neutrons of energy under 1 MeV, the compared frequency of the tracks of long range particles and of the recoils caused by the fission neutrons gives a measurement of the fission cross-section with emission of long range particles relative to the product of the fission cross-section by the mean number of neutrons emitted by fission. For neutrons of higher energy, one measures only the frequency of the tracks of long range particles, comparatively with the flux of primary neutrons. Some precautions are taken to eliminate the action of thermal neutrons in the measurements with fast neutrons. 2) with the aid of a system of ionization chamber and proportional counter, the rate of coincidence between the impulsions caused by the long range particles and the impulsions provided by one of the fission fragments is measured comparatively with the counting rate of fission fragme (author) [French] Les auteurs decrivent des mesures relatives a la section efficace de fission des isotopes de l'uranium et du plutonium (notamment {sup 235}U, {sup 238}U, {sup 239}Pu) avec emission de particules de long

Thermochronology of the South American platform in the state of Sao Paulo, Brazil, through apatite fission tracks

International Nuclear Information System (INIS)

Tello Saenz, C.A.; Hadler Neto, J.C.; Iunes, P.J.; Guedes, S.; Hackspacher, P.C.; Ribeiro, L.F.B.; Paulo, S.R.; Osorio A, A.M.

2005-01-01

The fission-track method (FTM) in apatite was applied to 45 samples collected in the Serra da Mantiqueira (Mantiqueira mountain range), the Serra do Mar (Mar mountain range), regions next to these mountain ranges and the coastal region between Ubatuba and Santos in the State of Sao Paulo, Brazil, to study the thermochronology of the South American Platform in southeast Brazil and its influence on Santos and Campos basins. The data presented in this work complement the previously presented data on the same region (Tello Saenz et al., 2003. J. S. Am. Earth Sci. 15, 765-774) with 31 new samples analyzed. The weighted mean of the corrected ages from high Mantiqueira (around 1000m), (121+/-6)Ma, coincides with the South Atlantic opening. The fact that its thermal history starts at a relatively low temperature (∼80 deg. C) suggests that the age of ∼120Ma would be the formation age of Serra da Mantiqueira due to a rapid pulse, in which tracks had no time to be retained at the closure temperature, that is ∼120 deg. C. The Serra do Mar presents a more complicated thermal history, with several reactivations indicated by the changes in the slope of its cooling curve. The thermal histories obtained in the regions next to these mountain ranges are compatible with the results mentioned above. The Santos Basin has unconformities that agree with changes in the slope thermal histories of the studied region

Nuclear fission and fission-product spectroscopy: 3. International workshop on nuclear fission and fission-product spectroscopy

International Nuclear Information System (INIS)

Goutte, Heloise; Fioni, Gabriele; Faust, Herbert; Goutte, Dominique

2005-01-01

The present book contains the proceedings of the third workshop in a series of workshops previously held in Seyssins in 1994 and 1998. The meeting was jointly organized by different divisions of CEA and two major international laboratories. In the opening address, Prof. B. Bigot, the French High Commissioner for Atomic Energy, outlined France's energy policy for the next few decades. He emphasized the continuing progress of nuclear fission in both technical and economic terms, allowing it to contribute to the energy needs of the planet even more in the future than it does today. Such progress implies a very strong link between fundamental and applied research based on experimental and theoretical approaches. The workshop gathered the different nuclear communities studying the fission process, including topics as the following: - nuclear fission experiments, - spectroscopy of neutron rich nuclei, - fission data evaluation, - theoretical aspects of nuclear fission, - and innovative nuclear systems and new facilities. The scientific program was suggested by an International Advisory Committee. About 100 scientists from 13 different countries attended the conference in the friendly working atmosphere of the Castle of Cadarache in the heart of the Provence. The proceedings of the workshop were divided into 11 sections addressing the following subject matters: 1. Cross sections and resonances (5 papers); 2. Fission at higher energies - I (5 papers); 3. Fission: mass and charge yields (4 papers); 4. Light particles and cluster emission (4 papers); 5. Spectroscopy of neutron rich nuclei (5 papers); 6. Resonances, barriers, and fission times (5 papers); 7. Fragment excitation and neutron emission (4 papers); 8. Mass and energy distributions (4 papers); 9. Needs for nuclear data and new facilities - I (4 papers); 10. Angular momenta and fission at higher Energies - II (3 papers); 11. New facilities - II (2 papers). A poster session of 8 presentations completed the workshop

Potentials of fissioning plasmas

International Nuclear Information System (INIS)

Karlheinz, Thom.

1979-01-01

Successful experiments with the nuclear pumping of lasers have demonstrated that in gaseous medium the kinetic energy of fission fragments can be converted directly into non-equilibrium optical radiation. This confirms the concept that the fissioning medium in a gas-phase nuclear reactor shows an internal structure such as a plasma in nearly thermal equilibrium varying up to a state of extreme-non-equilibrium. The accompanying variations of temperatures, pressure and radiative spectrum suggest wide ranges of applications. For example, in the gas-phase fission reactor concept enriched uranium hexafluoride or an uranium plasma replaces conventional fuel elements and permits operation above the melting point of solid materials. This potential has been motivation for the US National Aeronautics and Space Administration (NASA) to conduct relevant research for high specific impulse propulsion in space. The need to separate the high temperature gaseous fuel from the surfaces of a containing vessel and to protect them against thermal radiation has led to the concept of an externally moderated reactor in which the fissioning gaseous material is suspended by fluid dynamic means and the flow of opaque buffer gas removes the power. The gaseous nuclear fuel can slowly be circulated through the reactor for continuous on-site reprocessing including the annihilation of transuranium actinides at fission when being fed back into the reactor. An equilibrium of the generation and destruction of such actinides at fission when being fed back into the reactor. An equilibrium of the generation and destruction of such actinides can thus be achieved. These characteristics and the unique radiative properties led to the expectation that the gas-phase fission reactor could feature improved safety, safeguarding and economy, in addition to new technologies such as processing, photochemistry and the transmission of power over large distances in space

Fission of Al, Ti, Co, Zr, Nb, Ag, In, Nd, Sm, and Ta nuclei induced by 0.8-1.8 GeV photons

International Nuclear Information System (INIS)

Lima, D.A. de; Martins, J.B.; Tavares, O.A.P.

1989-01-01

Samples of Al, Ti, Co, Zr, Nb, Ag, In, Nd, Sm, and Ta elements in contact with solid state nuclear track detectors were exposed to 0.8-1.8 GeV bremsstrahlung beams at the 2.5-GeV Electron Synchrotron of the Bonn University. The detectors were processed to produce visible fission tracks for track analysis with optical microscopes. Absolute mean cross section per photon and fissility were evaluated. Results are discussed and compared with other photofission data as well as with estimates from the current fission models. A broad minimum found for nuclear fissility of 10 -4 -10 -3 covering the range 15 approx Z 2 /A approx 25 seems to confirm the predictions from the models. For Al and Ti nuclei the probability of fission amounts to approx 10 -1 . (author) [pt

Cooling, exhumation, and deformation in the Hindu Kush, NW Pakistan: New constraints from preliminary 40Ar/39Ar and fission track analyses

Science.gov (United States)

Faisal, Shah; Larson, Kyle P.; Camacho, Alfredo; Coutand, Isabelle

2018-06-01

Asian crust in the Hindu Kush region in northern Pakistan records a protracted history of rifting, subduction and collision not commonly preserved within the Himalaya. Because of this, it is key to understanding the development of the southern Eurasian margin both prior to and after collision with India. New mica 40Ar/39Ar and apatite fission track geochronologic data from this region provide constraints on the kinematics of the Hindu Kush. 40Ar/39Ar muscovite and biotite ages from the late Cambrian Kafiristan pluton are 379.7 ± 1.7 Ma and 47.2 ± 0.3 Ma, respectively. The muscovite age may record cooling or partial resetting, while the biotite age is interpreted to record a thermal disruption associated with the early stages of continental collision in the Himalayan system. A 111.0 ± 0.6 Ma muscovite age from the northern part of the Tirich Mir pluton (∼123 Ma old; U-Pb) is interpreted to indicate a recrystallization event ∼12 Myrs after its intrusion. In addition, a younger muscovite age of 47.5 ± 0.2 Ma was derived from the opposite side of the same pluton in the immediate hanging wall of the Tirich Mir fault. This Eocene age is interpreted to represent the time of recrystallization during fault (re)activation in the early stages of India-Asia continent-continent collision. 40Ar/39Ar biotite analysis from the Buni-Zom pluton yields an age of 61.6 ± 1.1 Ma and is interpreted to reflect cooling at mid-upper crustal levels subsequent to the pluton's emplacement in the middle Cretaceous. Finally, 17.1-21.3 Ma 40Ar/39Ar ages from the Garam Chasma pluton and surrounding metapelites indicate cooling immediately following crystallization of the leucogranite body in the earliest Miocene/latest Oligocene. The younger cooling history is resolved by fission track dating of apatite (AFT). In the vicinity of the bounding Tirich Mir fault, the Tirich Mir pluton yields an AFT age of 1.4 ± 0.3 Ma, which is consistent with active exhumation associated with the surface

Environmental Assessment for the Tula Peak Road Intersection

Science.gov (United States)

2009-07-01

Track. The result was a SABER project to modify the existing intersection. The proposed project (see map pg 3 and EPF 20080004 in appendices) was to...environmental clearance under 32 CFR 989.13. A second SABER project (see map on pg 3 and appendices EPF 20080433) took a more aggressive approach to...Outlook White Sands Missile Range Appendices A- Memo For Record from phone conversation RE: stop action of construction with NMDGF B- EPF 20080004 C

Delayed fission

Energy Technology Data Exchange (ETDEWEB)

Hatsukawa, Yuichi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1997-07-01

Delayed fission is a nuclear decay process that couples {beta} decay and fission. In the delayed fission process, a parent nucleus undergoes {beta} decay and thereby populates excited states in the daughter. If these states are of energies comparable to or greater than the fission barrier of the daughter, then fission may compete with other decay modes of the excited states in the daughter. In this paper, mechanism and some experiments of the delayed fission will be discussed. (author)

Use of combined alpha-spectrometry and fission track analysis for the determination of 240Pu/239Pu ratios in human tissue

International Nuclear Information System (INIS)

Love, S.F.; Filby, R.H.; Glover, S.E.; Stuit, D.B.; Kathren, R.L.

1998-01-01

Plutonium and other actinides were determined in human autopsy tissues of occupationally exposed workers who were registrants of the United States Transuranium and Uranium Registries (USTUR). In this study, Pu was purified and isolated from Am, U and Th, after drying and wet-ashing of the tissues, and the addition of 238 Pu as a radiotracer. After electrodeposition onto vanadium planchets, the 239+240 Pu activity was determined by alpha-spectrometry. A fission track method was developed to determine 239 Pu in the presence of 238 Pu and 240 Pu, using Lexan TM polycarbonate detectors. Combining the two techniques allowed the determination of the 240 Pu/ 239 Pu activity and atom ratios. Data from selected USTUR cases are presented. (author)

Fission track and petrostructural analysis of carbonatic massif of Tamazert ( high central Atlas, Morocco) and neogene reactivation of the north-atlasic fault

International Nuclear Information System (INIS)

Ziad, N.; Khazrouni, S.; Tayebi, M.; Bouabdli, A.; Poupeau, G.

2001-01-01

The uranium fission-track dating method is used in geochronological survey of basic apatites extracted from the Tamazert complex. The result of this survey coupled with those of petrostructural analysis of this massif enabled as to distinguish three age groups: 32.4 Myr, 23.3 Myr and 12.6 Myr. The first age corresponds to the setting up of the massif, whereas the two other ages indicate later emissions. The setting up of the sill whose age is 12.6 Myr induced a partial rejuvenation of the emission age og the massif. This late volcanic emission is probably related to the north-atlasic fault activity. 4 figs., 1 tab., 30 refs. (au)

Fundamentals of the double-humped fission barrier

International Nuclear Information System (INIS)

Brack, M.

1980-01-01

We review the development of the theory of the fission barrier over the past forty years. Special emphasis is put on the shell-correction method of Strutinsky and its foundation and numerical verification from microscopical Hartree-Fock calculations. The different practical realisations of the method and its applications to the calculation of deformation energy surfaces are reviewed. The influence of the different shape degrees of freedom of the nucleus on the form of the fission barrier is discussed. Finally, we summarize some more recent developments concerning both experimental and theoretical aspects of the double-humped fission barrier. (author)

Cretaceous to present paleothermal gradients, central Negev, Israel: constraints from fission track dating

International Nuclear Information System (INIS)

Kohn, B.P.; Feinstein, S.; Eyal, M.

1990-01-01

Apatite and zircon fission track ages (FTA), vitrinite reflectance (VR) data and burial history curves were integrated for reconstruction of Early Cretaceous to present maximum thermal gradients in four deep boreholes in the central Negev, Isreal. The most complete data set is available from the Ramon 1 borehole. Supplementary data were obtained from Hameishar 1, Makhtesh Qatan 2, and Kurnub 1 boreholes. Between ca. 122-90 Ma the constraints on thermal gradient obtained from apatite FTA overlap with those derived from zircon FT and VR data, restricting them to 0 C km -l . Apatite FTA between 90 and 80 Ma in Ramon 1 and Hameishar 1 suggest rapid cooling at the time recorded or earlier. Constraints on thermal gradient history derived from these ages are considerably strengthened over a short time span. From 80 Ma to the present, FTA data indicate that gradients had probably decayed to present-day regional levels (ca. 20 0 C km -1 ) by Early Tertiary time. Thermal constraints derived from apatite FTA and VR data in Makhtesh Qatan 2 and Kurnub 1 boreholes are consistent with those obtained post-56 Ma for Ramon 1. For pre-56 Ma, only VR data are available and these indicate considerably lower maximum gradients than those obtained for the same time period from Ramon 1. This dichotomy reflects different Early Cretaceous-Early Tertiary thermal regimes between the northern and southern parts of the study area. (author)

Detection of fission fragments and alpha particles using the solid trace detector CR-39

International Nuclear Information System (INIS)

Santos, R.C.

1988-01-01

The technique of detecting charged particles using the solid track detector CR-39 is employed to establish some characteristics of fission fragments and alpha particles emitted from a Cf-252 source. Results are presented and discussed on the following aspects i) distribution of the track diameters; ii) variations on the track diameters to the chemical attack; iii) variations of the chemical attack velocity with respect to concentration and temperature. iv) activation energy of the developping process; v) induction time; vi) critical angle and efficiency on track developping. (A.C.A.S.) [pt

Simulating fission product transients via the history-based local-parameter methodology

International Nuclear Information System (INIS)

Jenkins, D.A.; Rouben, B.; Salvatore, M.

1993-01-01

This paper describes the fission-product-calculation capacity of the history-based local-parameter methodology for evaluating lattice properties for use in core-tracking calculations in CANDU reactors. In addition to taking into account the individual past history of each bundles flux/power level, fuel temperature, and coolant density and temperature that the bundle has seen during its stay in the core, the latest refinement of the history-based method provides the capability of fission-product-drivers. It allows the bundle-specific concentrations of the three basic groups of saturating fission products to be calculated in steady state or following a power transient, including long shutdowns. The new capability is illustrated by simulating the startup period following a typical long-shutdown, starting from a snapshot in the Point Lepreau operating history. 9 refs., 7 tabs

Fission barriers in the quasi-molecular shape path

International Nuclear Information System (INIS)

Royer, G.; Bonilla, C.; Zbiri, K.; Gherghescu, R.A.

2003-01-01

New observed phenomena like asymmetric fission of intermediate mass nuclei, nuclear molecules in light nuclei, super and hyperdeformations, cluster radioactivity, fast-fission of heavy systems and fragmentation have renewed interest in investigating the fusion-like fission valley which leads rapidly to two touching spherical fragments and quasi-molecular shapes. Furthermore, rotating super and hyperdeformed nuclear states and superheavy nuclei can be formed only in heavy-ion collisions for which the initial configuration is two close quasi-spherical nuclei. For these shapes the balance between the Coulomb forces and surface tension forces does not allow to link the sheets of the potential energy surface corresponding to one-body shapes and to two separated fragments, respectively. It is necessary to add another term called proximity energy reproducing the finite-range effects of the nuclear force in the neck or the gap between the nascent fission fragments. A generalized liquid drop model has been developed to take into account this nuclear proximity energy, the mass and charge asymmetry, an accurate nuclear radius and the temperature effects. The initial value of the surface energy coefficient has been kept. Microscopic corrections have been determined within the asymmetric two center shell model or simpler algebraic approximations. With this model and deformation valley first studies had led to the following results: (i) good agreement between the potential barrier heights and the experimental fission barrier heights in the whole mass range; (ii) saddle-point corresponding to two separated fragments maintained in unstable equilibrium by the balance between the repulsive Coulomb forces and the attractive proximity forces; (iii) strong enhancement of the maximal angular momentum against fission; (iv) reasonable agreement with experimental data on the double-humped barriers of actinides. Within this same approach we have recently shown that the calculated potential

Discrimination of surface tracking patterns of gamma irradiated ...

Indian Academy of Sciences (India)

Unknown

†Department of High Voltage Engineering, College of Engineering Guindy, Chennai 600 005, India. MS received ... Surface tracking occurring in HV insulation systems is a very complex phenome- non and .... The potential drop across this was measured ... the box is used to explore the structure of the distribution points in a ...

Coulomb fission and transfer fission at heavy ion collisions

International Nuclear Information System (INIS)

Himmele, G.

1981-01-01

In the present thesis the first direct evidence of nuclear fission after inelastic scattering of heavy ions (sup(183,184)W, 152 Sm → 238 U; 184 W → 232 Th; 184 W, 232 Th → 248 Cm) is reported. Experiments which were performed at the UNILAC of the Gesellschaft fuer Schwerionenforschung in Darmstadt show the observed heavy ion induced fission possesses significant properties of the Coulomb fission. The observed dependence of the fission probability for inelastic scattering on the projectile charge proves that the nuclear fission is mediated by the electromagnetic interaction between heavy ions. This result suggests moreover a multiple Coulomb-excitation preceding the fission. Model calculations give a first indication, that the Coulomb fission proceeds mainly from the higher β phonons. In the irradiation with 184 W the fission probability of 232 Th is for all incident energies about 40% smaller that at 238 U. The target dependence of the Coulomb fission however doesn't allow, to give quantitative statements about the position and B(E2)-values of higher lying β phonons. (orig./HSI) [de

Fission track analysis method of urine plutonium and estimation of plutonium-239 internal dose to Marshallese

International Nuclear Information System (INIS)

Zhao Shixuan

1995-01-01

Bravo detonated at Bikini Atoll on the morning of March 1, 1954, unexpectedly released a large amount of radioactive fallout on the areas. Impact studies on the radiological health and safety of the residents living in the contaminated environments are still undergoing. For plutonium dose assessment, researchers at Brookhaven National Laboratory established a fission track analysis (FTA) method for low-level 239 Pu measurement. Furthermore, a new shipboard protocol was developed for collecting 24-h radiologically clean urine samples. The purposes of this paper are to update information on the FTA processes and to present a set of results on the 239 Pu measurements in the Marshallese populations (Rongelap and Utirik) between 1981-1991. The detection sensitivity of FTA method (99% confidence level) in these samples was 2-3 μBq which is equivalent to 0.2-0.3 mSv effective dose equivalent (EDE) to age 70 for the Marshallese. The latest 1991 FTA data indicate average EDE of 0.62 mSv and 1.6 mSv for the people of Rongelap and Utirik, respectively, which both are the highest values since 1988

Phanerozoic brittle tectonics in the South American Continental Platform, Southeast Brazil: new insights from fission track studies on apatite in reactivated fault zones

International Nuclear Information System (INIS)

Ribeiro, Luiz Felipe Brandini; Hackspacher, Peter Christian; Saenz, Carlos Alberto Tello; Iunes, Pedro Jose; Hadler Neto, Julio Cesar; Paulo, Sergio R.

2005-01-01

Apatite Fission Track Method (FTM) studies were performed on samples coming from two different fault domains in the Precambrian basement of southeast Brazil in order to evaluate subsequent Phanerozoic tectonic movements in that part of the South American Platform. The samples studied were collected along brittle faults in the Mantiqueira mountain range and in the Jundiai upland plain (Braganca Paulista and Extrema), approximately 100 km northeast of Sao Paulo, Brazil. The results of paleostress analysis, as well as the presence of as pseudotachylyte material in the reactivated fault zones, indicates a rapid strain rate and high frictional temperature along these faults. The recognition of deformation related to this brittle tectonic regime is of key importance for the reconstruction of Paleozoic and Mesozoic tectonic evolution of the South American Platform. The causal effects of these tectonic readjustments of cratonic rocks during the breakup of West-Gondwana during the Cretaceous and also in younger geological history, are some of the key parameters for understanding the Phanerozoic evolution of the Mantiqueira mountain range. Our FTM data shows the oldest regional thermal histories are recorded in the Jundiai upland plain beginning in the Upper Triassic (∼190 Ma) at 50 deg C, indicating a rapid cooling that is coincident with the tectonic subsidence of the Parana Basin and, probably, the uplift and preservation of Gondwana surface. These data also show slow linear heating (between 50 to 90 deg C) of the southeastern Brazilian margin up to the Lower Cretaceous (∼120 Ma). This phenomenon could either be related to migration of the Trindade plume, or extensional/compressional movements. At ∼120 Ma a structural inversion occurred and the previous slow linear heating was replaced by slow linear cooling (from 90 to 25 deg C) that has persisted up to the present time. Locally, in the younger fault domain, in the Mantiqueira Range near Extrema, fission tracks

Operational tracking of lava lake surface motion at Kīlauea Volcano, Hawai‘i

Science.gov (United States)

Patrick, Matthew R.; Orr, Tim R.

2018-03-08

Surface motion is an important component of lava lake behavior, but previous studies of lake motion have been focused on short time intervals. In this study, we implement the first continuous, real-time operational routine for tracking lava lake surface motion, applying the technique to the persistent lava lake in Halema‘uma‘u Crater at the summit of Kīlauea Volcano, Hawai‘i. We measure lake motion by using images from a fixed thermal camera positioned on the crater rim, transmitting images to the Hawaiian Volcano Observatory (HVO) in real time. We use an existing optical flow toolbox in Matlab to calculate motion vectors, and we track the position of lava upwelling in the lake, as well as the intensity of spattering on the lake surface. Over the past 2 years, real-time tracking of lava lake surface motion at Halema‘uma‘u has been an important part of monitoring the lake’s activity, serving as another valuable tool in the volcano monitoring suite at HVO.

NEW CONCEPTS AND TEST METHODS OF CURVE PROFILE AREA DENSITY IN SURFACE: ESTIMATION OF AREAL DENSITY ON CURVED SPATIAL SURFACE

OpenAIRE

Hong Shen

2011-01-01

The concepts of curve profile, curve intercept, curve intercept density, curve profile area density, intersection density in containing intersection (or intersection density relied on intersection reference), curve profile intersection density in surface (or curve intercept intersection density relied on intersection of containing curve), and curve profile area density in surface (AS) were defined. AS expressed the amount of curve profile area of Y phase in the unit containing surface area, S...

Atomic structure of screw dislocations intersecting the Au(111) surface: A combined scanning tunneling microscopy and molecular dynamics study

DEFF Research Database (Denmark)

Engbæk, Jakob; Schiøtz, Jakob; Dahl-Madsen, Bjarke

2006-01-01

The atomic-scale structure of naturally occurring screw dislocations intersecting a Au(111) surface has been investigated both experimentally by scanning tunneling microscopy (STM) and theoretically using molecular dynamics (MD) simulations. The step profiles of 166 dislocations were measured using...... STM. Many of them exhibit noninteger step-height plateaus with different widths. Clear evidence was found for the existence of two different populations at the surface with distinct (narrowed or widened) partial-splitting widths. All findings are fully confirmed by the MD simulations. The MD...... simulations extend the STM-, i.e., surface-, investigation to the subsurface region. Due to this additional insight, we can explain the different partial-splitting widths as the result of the interaction between the partial dislocations and the surface....

Geometrical Design Errors in Duhok Intersections by Driver Behavior

Directory of Open Access Journals (Sweden)

Dilshad Ali Mohammed

2018-03-01

Full Text Available In many situations, drivers if certain of the absence traffic monitoring system tend to shorten their driving paths and travel time across intersections. This behavior will be encouraged if the geometrical design suffers from mistakes, or the geometrical design and road conditions make it harder for drivers to follow the correct routes. Sometimes the intersection arrangement is confusing for the driver to distinguish the right from the wrong track. In this study, two sites with large number of driving mistakes were noticed. One site is a roundabout within the university of Duhok campus. The other is the intersection just outside the University of Duhok eastern main gate. At both sites, the geometry is very confusing and encourage driving mistakes. The university roundabout which was the first site investigated, was not properly designed encouraging wrong side driving. Many traffic accidents took place at this roundabout.  Wrong side driving reaches 32 % at peak hour in one approach.  This was reduced to 6% when temporary divisional island was installed. The other approach has a 15% wrong side driving and no remedy could be done to it. At the intersection near the university gate, wrong side driving reaches 56% of the traffic emerging from the main gate at peak hour. This was reduced to 14% when drivers are guided through direction sign. This percentage was reduced further to 9% with standing policeman.

Performance Analysis of Fission and Surface Source Iteration Method for Domain Decomposed Monte Carlo Whole-Core Calculation

International Nuclear Information System (INIS)

Jo, Yu Gwon; Oh, Yoo Min; Park, Hyang Kyu; Park, Kang Soon; Cho, Nam Zin

2016-01-01

In this paper, two issues in the FSS iteration method, i.e., the waiting time for surface source data and the variance biases in local tallies are investigated for the domain decomposed, 3-D continuous-energy whole-core calculation. The fission sources are provided as usual, while the surface sources are provided by banking MC particles crossing local domain boundaries. The surface sources serve as boundary conditions for nonoverlapping local problems, so that each local problem can be solved independently. In this paper, two issues in the FSS iteration are investigated. One is quantifying the waiting time of processors to receive surface source data. By using nonblocking communication, 'time penalty' to wait for the arrival of the surface source data is reduced. The other important issue is underestimation of the sample variance of the tally because of additional inter-iteration correlations in surface sources. From the numerical results on a 3-D whole-core test problem, it is observed that the time penalty is negligible in the FSS iteration method and that the real variances of both pin powers and assembly powers are estimated by the HB method. For those purposes, three cases; Case 1 (1 local domain), Case 2 (4 local domains), Case 3 (16 local domains) are tested. For both Cases 2 and 3, the time penalties for waiting are negligible compared to the source-tracking times. However, for finer divisions of local domains, the loss of parallel efficiency caused by the different number of sources for local domains in symmetric locations becomes larger due to the stochastic errors in source distributions. For all test cases, the HB method very well estimates the real variances of local tallies. However, it is also noted that the real variances of local tallies estimated by the HB method show slightly smaller than the real variances obtained from 30 independent batch runs and the deviations become larger for finer divisions of local domains. The batch size used for the HB

Measurement of Fission Product Yields from Fast-Neutron Fission

Science.gov (United States)

Arnold, C. W.; Bond, E. M.; Bredeweg, T. A.; Fowler, M. M.; Moody, W. A.; Rusev, G.; Vieira, D. J.; Wilhelmy, J. B.; Becker, J. A.; Henderson, R.; Kenneally, J.; Macri, R.; McNabb, D.; Ryan, C.; Sheets, S.; Stoyer, M. A.; Tonchev, A. P.; Bhatia, C.; Bhike, M.; Fallin, B.; Gooden, M. E.; Howell, C. R.; Kelley, J. H.; Tornow, W.

2014-09-01

One of the aims of the Stockpile Stewardship Program is a reduction of the uncertainties on fission data used for analyzing nuclear test data [1,2]. Fission products such as 147Nd are convenient for determining fission yields because of their relatively high yield per fission (about 2%) and long half-life (10.98 days). A scientific program for measuring fission product yields from 235U,238U and 239Pu targets as a function of bombarding neutron energy (0.1 to 15 MeV) is currently underway using monoenergetic neutron beams produced at the 10 MV Tandem Accelerator at TUNL. Dual-fission chambers are used to determine the rate of fission in targets during activation. Activated targets are counted in highly shielded HPGe detectors over a period of several weeks to identify decaying fission products. To date, data have been collected at neutron bombarding energies 4.6, 9.0, 14.5 and 14.8 MeV. Experimental methods and data reduction techniques are discussed, and some preliminary results are presented.

Growth of fine holes in polyethyleneterephthalate film irradiated by fission fragments

International Nuclear Information System (INIS)

Komaki, Y.; Tsujimura, S.

1975-01-01

Growth of fine holes by chemical etching in polyethyleneterephthalate films exposed to fission fragments were followed by measuring gas flow through films. The etching rate along tracks and the radial etching rate were determined at hole diameters of 100--3000 A and hole densities of 10 6 --10 8 /cm 2

Fission track analysis and evolution of mesozoic-paleozoic hydrocarbon resource-rocks headed in Northern Jiangsu-South Yellow sea basin

International Nuclear Information System (INIS)

Xu Hong; Cai Qianzhong; Sun Heqing; Guo Zhenxuan; Yan Guijing; Dai Jing; Liu Dongying

2008-01-01

Fission track data of different geologic epoches from Binhai salient, Yancheng sag, Haian sag, Baiju sag, Gaoyou sag, Hongze sag and Jinhu sag of northern Jiangsu basin and seismic data from Laoshan uplift in South Yellow Sea basin and evolution of Paleozoic hydrocarbon resource-rocks headed in the Northern Jiangsu-South Yellow Sea basin were studied. Results indicate that Binhai salient uplifted in 38-15 Ma, forming 'structure uplifting model', Paleozoic hydrocarbon resource-rocks have the appearance of 'different layers but identical mature, different layers but identical temperature' with Laoshan uplift. All sags have the characters of 'long time heating model', and sedimentations in Cenozoic were exploited by 2 km. Mesozoic-Paleozoic hydrocarbon resource- rocks of Laoshan uplift get ahead of 10 km. Structure evolution was compared with Binhai salient. According to the modeling results of secondary hydrocarbon generation, Mesozoic-Paleozoic hydrocarbon resource-rocks of Laoshan uplift have the good reservoir potentiality and probably become an important new window for sea oil and gas exploration. (authors)

New fission valley for 258Fm and nuclei beyond

International Nuclear Information System (INIS)

Moeller, P.; Nix, J.R.; Swiatecki, W.J.

1986-01-01

Experimental results on the fission properties of nuclei close to 264 Fm show sudden and large changes with a change of only one or two neutrons or protons. The nucleus 258 Fm, for instance, undergoes symmetric fission with a half-life of about 0.4 ms and a kinetic energy peaked at about 235 MeV whereas 256 Fm undergoes asymmetric fission with a half-life of about 3 h and a kinetic energy peaked at about 200 MeV. Qualitatively, these sudden changes hve been postulated to be due to the emergence of fragment shells in symmetric fission products close to 132 Sn. A quantitative calculation that shows where high-kinetic-energy symmetric fission occurs and why it is associated with a sudden and large decrease in fission half-lives. The study is based on calculations of potential-energy surfaces in the macroscopic-microscopic model and a semi-empirical model for the nuclear inertia. The implications of the new fission valley on the stability of the heaviest elements is discussed. 33 refs., 12 figs

Composition dependent thermal annealing behaviour of ion tracks in apatite

Energy Technology Data Exchange (ETDEWEB)

Nadzri, A., E-mail: allina.nadzri@anu.edu.au [Department of Electronic Materials Engineering, Research School of Physics and Engineering, Australian National University, Canberra, ACT 2601 (Australia); Schauries, D.; Mota-Santiago, P.; Muradoglu, S. [Department of Electronic Materials Engineering, Research School of Physics and Engineering, Australian National University, Canberra, ACT 2601 (Australia); Trautmann, C. [GSI Helmholtz Centre for Heavy Ion Research, Planckstrasse 1, 64291 Darmstadt (Germany); Technische Universität Darmstadt, 64287 Darmstadt (Germany); Gleadow, A.J.W. [School of Earth Science, University of Melbourne, Melbourne, VIC 3010 (Australia); Hawley, A. [Australian Synchrotron, 800 Blackburn Road, Clayton, VIC 3168 (Australia); Kluth, P. [Department of Electronic Materials Engineering, Research School of Physics and Engineering, Australian National University, Canberra, ACT 2601 (Australia)

2016-07-15

Natural apatite samples with different F/Cl content from a variety of geological locations (Durango, Mexico; Mud Tank, Australia; and Snarum, Norway) were irradiated with swift heavy ions to simulate fission tracks. The annealing kinetics of the resulting ion tracks was investigated using synchrotron-based small-angle X-ray scattering (SAXS) combined with ex situ annealing. The activation energies for track recrystallization were extracted and consistent with previous studies using track-etching, tracks in the chlorine-rich Snarum apatite are more resistant to annealing than in the other compositions.

Effect of gamma-ray and electron irradiation on the response of solid-state track detectors

International Nuclear Information System (INIS)

Fukuda, Kyue

1980-01-01

Specimens of muscovite mica were first exposed to fission fragments and then to various gamma-ray fields from a 60 Co source ranging from 1.9 x 10 3 to 1.6 x 10 4 Mrad dose. The results show that the average etched width of fission-fragment tracks decreases with increasing gamma-ray dose. Shallow pits were observed in etched specimens when the gamma-ray dose exceeded 5 x 10 3 Mrad. Numerous shallow etch pits caused by the gamma-ray irradiation interfered with the observation of fission tracks in the specimens. No shallow etch pits were observed in the specimen annealed for 100 min at 600 0 C before the gamma-ray irradiation. Pre-annealing extends the ''safety limits'' of gamma background below which muscovite mica can be used to observe fission tracks without any gamma-ray interference. Gamma-ray and electron irradiation caused significant increase of the resistance to thermal decomposition of muscovite mica. The resistance increased markedly in the dose range from 5 x 10 3 to 8 x 10 3 Mrad. These phenomena suggest the use of mica to assess radiation doses of gamma rays and electrons up to several thousand megarads. (author)

60 years controlled nuclear fission: CP-1

International Nuclear Information System (INIS)

Anon.

2002-01-01

On December 2, 1942, the Chicago Pile 1 (CP-1) went critical for the first time. In this way, the scientists and engineers involved in the project under the leadership of Enrico Fermi succeeded in demonstrating that a self-sustaining nuclear reaction with nuclear fission processes was technically feasible. Only four years after the discovery and proof of nuclear fission by Otto Hahn, Fritz Strassmann, and Lise Meitner, the experiment consisting of graphite blocks as the moderator and uranium dioxide pellets as the fuel, as well as instrumentation and control devices, had been set up in the former squash court of the field and track stadium of the University of Chicago. Precisely at 3.36 a.m. Chicago time, after control rods had been withdrawn, the instruments showed the chain reaction by the neutron flux they indicated. An important cornerstone in the use of nuclear power had thus been laid. (orig.)

Global Land Surface Temperature From the Along-Track Scanning Radiometers

Science.gov (United States)

Ghent, D. J.; Corlett, G. K.; Göttsche, F.-M.; Remedios, J. J.

2017-11-01

The Leicester Along-Track Scanning Radiometer (ATSR) and Sea and Land Surface Temperature Radiometer (SLSTR) Processor for LAnd Surface Temperature (LASPLAST) provides global land surface temperature (LST) products from thermal infrared radiance data. In this paper, the state-of-the-art version of LASPLAST, as deployed in the GlobTemperature project, is described and applied to data from the Advanced Along-Track Scanning Radiometer (AATSR). The LASPLAST retrieval formulation for LST is a nadir-only, two-channel, split-window algorithm, based on biome classification, fractional vegetation, and across-track water vapor dependences. It incorporates globally robust retrieval coefficients derived using highly sampled atmosphere profiles. LASPLAST benefits from appropriate spatial resolution auxiliary information and a new probabilistic-based cloud flagging algorithm. For the first time for a satellite-derived LST product, pixel-level uncertainties characterized in terms of random, locally correlated, and systematic components are provided. The new GlobTemperature GT_ATS_2P Version 1.0 product has been validated for 1 year of AATSR data (2009) against in situ measurements acquired from "gold standard reference" stations: Gobabeb, Namibia, and Evora, Portugal; seven Surface Radiation Budget stations, and the Atmospheric Radiation Measurement station at Southern Great Plains. These data show average absolute biases for the GT_ATS_2P Version 1.0 product of 1.00 K in the daytime and 1.08 K in the nighttime. The improvements in data provenance including better accuracy, fully traceable retrieval coefficients, quantified uncertainty, and more detailed information in the new harmonized format of the GT_ATS_2P product will allow for more significant exploitation of the historical LST data record from the ATSRs and a valuable near-real-time service from the Sea and Land Surface Temperature Radiometers (SLSTRs).

Application of pulse shape discrimination in Si detector for fission ...

Indian Academy of Sciences (India)

Pulse shape discrimination (PSD) with totally depleted transmission type Si surface barrier detector in reverse mount has been investigated to identify fission fragments in the presence of elastic background in heavy ion-induced fission reactions by both numerical simulation and experimental studies. The PSD method is ...

[Fission product yields of 60 fissioning reactions]. Final report

International Nuclear Information System (INIS)

Rider, B.F.

1995-01-01

In keeping with the statement of work, I have examined the fission product yields of 60 fissioning reactions. In co-authorship with the UTR (University Technical Representative) Talmadge R. England ''Evaluation and Compilation of Fission Product Yields 1993,'' LA-UR-94-3106(ENDF-349) October, (1994) was published. This is an evaluated set of fission product Yields for use in calculation of decay heat curves with improved accuracy has been prepared. These evaluated yields are based on all known experimental data through 1992. Unmeasured fission product yields are calculated from charge distribution, pairing effects, and isomeric state models developed at Los Alamos National Laboratory. The current evaluation has been distributed as the ENDF/B-VI fission product yield data set

Extraction of potential energy in charge asymmetry coordinate from experimental fission data

Energy Technology Data Exchange (ETDEWEB)

Pasca, H. [Joint Institute for Nuclear Research, Dubna (Russian Federation); ' ' Babes-Bolyai' ' Univ., Cluj-Napoca (Romania); Andreev, A.V.; Adamian, G.G. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Antonenko, N.V. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Tomsk Polytechnic Univ. (Russian Federation). Mathematical Physics Dept.

2016-12-15

For fissioning isotopes of Ra, Ac, Th, Pa, and U, the potential energies as a function of the charge asymmetry coordinate are extracted from the experimental charge distributions of the fission fragment and compared with the calculated scission-point driving potentials. The role of the potential energy surfaces in the description of the fission charge distribution is discussed. (orig.)

Volatilization and reaction of fission products in flowing steam

International Nuclear Information System (INIS)

Johnson, I.; Steidl, D.V.; Johnson, C.E.

1985-01-01

The principal risk to the public from nuclear power plants derives from the highly radioactive atoms (fission products) generated as energy is produced in the nuclear fuel. The revolatilization of fission products from reactor system surfaces due to self-heating by radioactive decay has become a complicating factor in the source-term redefinition effort. It has had a major impact on calculations of fission product distributions in accident safety analyses. The focus of this research effort was to investigate the volatilization and transport of fission products and control rod materials in a flowing gaseous steam-hydrogen mixture. Fission product and control rod materials in various combinations were studied including CsI, CsOH, TeO 2 , SrO, Ag, In, Cd and Mn. The vaporization behavior of the deposits were characterized with respect to vaporization rates, chemical species and downstream transport behavior

From ground state to fission fragments: A complex, multi-dimensional multi-path problem

International Nuclear Information System (INIS)

Moeller, P.; Nix, J.R.; Swiatecki, W.J.

1992-01-01

Experimental results on the fission properties of nuclei close to 264 Fm show sudden and large changes with a change of only one or two neutrons or protons. The nucleus 258 Fm, for instance, undergoes symmetric fission with a half-life of about 0.4 ms and a kinetic-energy distribution peaked at about 235 MeV whereas 256 Fm undergoes asymmetric fission with a half-life of about 3 h and a kinetic-energy distribution peaked at about 200 MeV. Qualitatively, these sudden changes have been postulated to be due to the emergence of fragment shells in symmetric-fission products close to 132 Sn. Here we present a quantitative calculation that shows where high-kinetic-energy symmetric fusion occurs and why it is associated with a sudden and large decrease in fission half-lives. We base our study on calculations of potential-energy surfaces in the macroscopic-microscopic model and a semi-empirical model for the nuclear inertia. We use the three-quadratic-surface parameterization to generate the shapes for which the potential-energy surfaces are calculated. The use of this parameterization and the use of the finite-range macroscopic model allows for the study of two touching spheres and similar shapes. Since these shapes are thought to correspond to the scission shapes for the high-kinetic-energy events it is of crucial importance that a continuous sequence of shapes leading from the nuclear ground state to these configurations can be studied within the framework of the model. We present the results of the calculations in terms of potential-energy surfaces and fission half-lives for heavy even nuclei. The surfaces are displayed in the form of contour diagrams as functions of two moments of the shape. They clearly show the appearance of a second fission valley, which leads to scission configurations close to tow touching spheres, for fissioning systems in the vicinity of 264 Fm

Plastic limit loads for cylindrical shell intersections under combined loading

International Nuclear Information System (INIS)

Skopinsky, V.N.; Berkov, N.A.; Vogov, R.A.

2015-01-01

In this research, applied methods of nonlinear analysis and results of determining the plastic limit loads for shell intersection configurations under combined internal pressure, in-plane moment and out-plane moment loadings are presented. The numerical analysis of shell intersections is performed using the finite element method, geometrically nonlinear shell theory in quadratic approximation and plasticity theory. For determining the load parameter of proportional combined loading, the developed maximum criterion of rate of change of relative plastic work is employed. The graphical results for model of cylindrical shell intersection under different two-parameter combined loadings (as generalized plastic limit load curves) and three-parameter combined loading (as generalized plastic limit load surface) are presented on the assumption that the internal pressure, in-plane moment and out-plane moment loads were applied in a proportional manner. - Highlights: • This paper presents nonlinear two-dimensional FE analysis for shell intersections. • Determining the plastic limit loads under combined loading is considered. • Developed maximum criterion of rate of change of relative plastic work is employed. • Plastic deformation mechanism in shell intersections is discussed. • Results for generalized plastic limit load curves of branch intersection are presented

Influence of the particle discriminator for producing the microporous nuclear track etched membrane

International Nuclear Information System (INIS)

Thongphud, Apaporn; Ratanatongchai, Wichian; Supaphol, Pitt; Visal-athaphand, Pinpan

2005-10-01

The particle discriminator was used to focus the fission fragments from nuclear fission reaction between thermal neutron from the Thai Research Reactor and U-235 in uranium screen to strike almost normally to the polycarbonate (PC) film. The latent tracks in the thin 15 mm PC film were revealed after etching in 6N NaOH solution at 70 o C for 60 min. It was found that the tracks were porous. The porosity was more discrete and the pore shape was more circular as well. The track diameter was measured 3.73 +- 0.32 mm. It was also found that using particle discriminators with increasing thickness during exposure gives fewer pores in the PC film, after chemical etching under the same condition as above

Thermal history of the Krishna-Godavari basin, India: Constraints from apatite fission track thermochronology and organic maturity data

Science.gov (United States)

Sahu, Himansu S.; Raab, Matthias J.; Kohn, Barry P.; Gleadow, Andrew J. W.; Bal, Kiron D.

2013-09-01

The Krishna-Godavari (KG) basin, a passive margin Late Carboniferous to Holocene basin along the rifted east coast of India, includes the deltaic and inter-deltaic regions of the Krishna and Godavari rivers onshore and extends into the offshore. It is one of India's premier hydrocarbon-bearing basins. In an attempt to better understand the thermal history of the basin, apatite fission track (AFT) data has been obtained from six exploration wells (five onshore and one offshore). AFT thermal history models as well as other thermal indicators e.g. vitrinite reflectance (VR), Rock-Eval Tmax data reveal that the host rocks are currently at their maximum post-depositional temperatures and that any possible heating related to small-scale tectonism or rifting episodes in the basin bears little significance on the maturation of the sediments. In the case of one borehole (M-1) however, the organic maturity data reveals a period of Oligocene cooling across an unconformity when ∼1000 m of section was eroded due to falling sea-level. This information offers the potential for improved basin modeling of the KG basin.

Solid state track recorder measurements in the poolside critical assembly

International Nuclear Information System (INIS)

Ruddy, F.H.; Gold, R.; Roberts, J.H.

1979-01-01

Fission rate measurements using solid state track recorders (SSTR) have been performed at the PCA. A schematic representation of a cross-section of the PCA is shown. Fission rates were measured in the pressure vessel simulator at the T/4, T/2 and 3T/4 positions and in the void box (VB). SSTR measurements were carried out with 232 Th, 235 U (bare and cadmium covered), 238 U and 237 Np fissionable deposits. Midplane only measurements were carried out for 235 U and 237 Np, while 5 axial locations at 1/4T and 1/2T and 3 axial locations at 3/4T and in the VB were sampled for 232 Th and 238 U. The HEDL SSTR fission rate measurements reported herein for both configurations together with NBS and CEN/SCK fission chamber measurements will be used to establish absolute and relative fission reaction rates, and ratios for the PCA pressure vessel Benchmark Facility

Mechanism of nuclear dissipation in fission and heavy-ion reactions

International Nuclear Information System (INIS)

Nix, J.R.; Sierk, A.J.

1986-01-01

Recent advances in the theoretical understanding of nuclear dissipation at intermediate excitation energies are reviewed, with particular emphasis on a new surface-plus-window mechanism that involves interactions of either one or two nucleons with the moving nuclear surface and also, for dumbbell-like shapes encountered in fission and heavy-ion reactions, the transfer of nucleons through the window separating the two portions of the system. This novel dissipation mechanism provides a unified macroscopic description of such diverse phenomena as widths of isoscalar giant quadrupole and giant octupole resonances, mean fission-fragment kinetic energies and excitation energies, dynamical thresholds for compound-nucleus formation, enhancement in neutron emission prior to fission, and widths of mass and charge distributions in deep-inelastic heavy-ion reactions. 41 refs., 8 figs

Ternary fission

International Nuclear Information System (INIS)

Wagemans, C.

1991-01-01

Since its discovery in 1946, light (charged) particle accompanied fission (ternary fission) has been extensively studied, for spontaneous as well as for induced fission reactions. The reason for this interest was twofold: the ternary particles being emitted in space and time close to the scission point were expected to supply information on the scission point configuration and the ternary fission process was an important source of helium, tritium, and hydrogen production in nuclear reactors, for which data were requested by the nuclear industry. Significant experimental progress has been realized with the advent of high-resolution detectors, powerful multiparameter data acquisition systems, and intense neutron and photon beams. As far as theory is concerned, the trajectory calculations (in which scission point parameters are deduced from the experimental observations) have been very much improved. An attempt was made to explain ternary particle emission in terms of a Plateau-Rayleigh hydrodynamical instability of a relatively long cylindrical neck or cylindrical nucleus. New results have also been obtained on the so-called open-quotes trueclose quotes ternary fission (fission in three about-equal fragments). The spontaneous emission of charged particles has also clearly been demonstrated in recent years. This chapter discusses the main characteristics of ternary fission, theoretical models, light particle emission probabilities, the dependence of the emission probabilities on experimental variables, light particle energy distributions, light particle angular distributions, correlations between light particle accompanied fission observables, open-quotes trueclose quotes ternary fission, and spontaneous emission of heavy ions. 143 refs., 18 figs., 8 tabs

Measurement of {sup 238}Np fission cross-section by neutrons near thermal point (preliminary results)

Energy Technology Data Exchange (ETDEWEB)

Abramo; vich, S.N.; Andreev, M.F.; Bol`shakov, Y.M. [Institute of Experimental Physics, Arzamas (Russian Federation)] [and others

1995-10-01

Measurements have been carried out of {sup 238}Np fission cross-section by thermal neutrons. The isotope {sup 238}Np was built up through the reaction {sup 238}U(p,n) on an electrostatic accelerator. Extraction and cleaning of the sample were done by ion-exchange chromatography. Fast neutrons were generated on the electrostatic accelerator through the reaction {sup 9}Be(d,n); a polyethylene block was used to slow down neutrons. Registration of fission fragments was performed with dielectric track detectors. Suggesting that the behavior of {sup 238}Np and {sup 238}U. Westscott`s factors are indentical the fission cross-section of {sup 238}Np was obtained: {sigma}{sub fo}=2110 {plus_minus} 75 barn.

Fission level densities

International Nuclear Information System (INIS)

Maslov, V.M.

1998-01-01

Fission level densities (or fissioning nucleus level densities at fission saddle deformations) are required for statistical model calculations of actinide fission cross sections. Back-shifted Fermi-Gas Model, Constant Temperature Model and Generalized Superfluid Model (GSM) are widely used for the description of level densities at stable deformations. These models provide approximately identical level density description at excitations close to the neutron binding energy. It is at low excitation energies that they are discrepant, while this energy region is crucial for fission cross section calculations. A drawback of back-shifted Fermi gas model and traditional constant temperature model approaches is that it is difficult to include in a consistent way pair correlations, collective effects and shell effects. Pair, shell and collective properties of nucleus do not reduce just to the renormalization of level density parameter a, but influence the energy dependence of level densities. These effects turn out to be important because they seem to depend upon deformation of either equilibrium or saddle-point. These effects are easily introduced within GSM approach. Fission barriers are another key ingredients involved in the fission cross section calculations. Fission level density and barrier parameters are strongly interdependent. This is the reason for including fission barrier parameters along with the fission level densities in the Starter File. The recommended file is maslov.dat - fission barrier parameters. Recent version of actinide fission barrier data obtained in Obninsk (obninsk.dat) should only be considered as a guide for selection of initial parameters. These data are included in the Starter File, together with the fission barrier parameters recommended by CNDC (beijing.dat), for completeness. (author)

Dynamical chaos and induced nuclear fission

Energy Technology Data Exchange (ETDEWEB)

Bolotin, Yu L; Krivoshej, I V

1985-01-01

It is shown that the exponential instability of trajectories, which arises at negative curvature of the potential energy surface, leads to diffusion of the image point through the barrier and determines real time delays in induced nuclear fission.

Research on metallogenic conditions of intersection-type uranium ore-deposits in Zhongdong area, Northern Guangdong province

International Nuclear Information System (INIS)

Wang Zhengqi; Wu Lieqin; Zhang Guoyu

2007-12-01

The methods following as field geological investigation, trace element geo- chemistry and isotope geochemistry were used in this project. Based on geological and geochemical characteristics of Xiaoshui uranium ore deposits in Zhongdong area, Xiazhuang ore-field, Guangdong province, it could be concluded that: (1) The Provenance of Cretaceous mantle is a enriched mantle; (2) Silicified zone-type and intersection-type uranium ore are distinctness in the metallogenic period and mineralization process, and main metallogenic period of Xiaoshui uranium ore-deposit is 73.5 Ma; (3) The sources of uranium mineralization substance derived from enriched mantle; and (4)The intersection-type high grade uranium deposits were controlled by substances derived from mantle (contain with U, CO 2 , F, et al), tracks of intersection of NWW-across with NNE-trending faults and lithology of diabase. (authors)

Research on metallogenic conditions of intersection-type uranium ore-deposits in Zhongdong area, Northern Guangdong province

Energy Technology Data Exchange (ETDEWEB)

Zhengqi, Wang [East China Inst. of Technology, Fuzhou (China); [Beijing Research Inst. of Uranium Geology, Beijing (China); Lieqin, Wu [Institute No.290, CNNC, Shaoguan (China); Guoyu, Zhang [East China Inst. of Technology, Fuzhou (China)

2007-12-15

The methods following as field geological investigation, trace element geo- chemistry and isotope geochemistry were used in this project. Based on geological and geochemical characteristics of Xiaoshui uranium ore deposits in Zhongdong area, Xiazhuang ore-field, Guangdong province, it could be concluded that: (1) The Provenance of Cretaceous mantle is a enriched mantle; (2) Silicified zone-type and intersection-type uranium ore are distinctness in the metallogenic period and mineralization process, and main metallogenic period of Xiaoshui uranium ore-deposit is 73.5 Ma; (3) The sources of uranium mineralization substance derived from enriched mantle; and (4)The intersection-type high grade uranium deposits were controlled by substances derived from mantle (contain with U, CO{sub 2}, F, et al), tracks of intersection of NWW-across with NNE-trending faults and lithology of diabase. (authors)

Preliminary study of geotectonic evolution of the southern region of Sao Francisco (MG, Brazil) craton: an interpretation based on Rb-Sr, K-Ar, Pb-Pb and fission track data

International Nuclear Information System (INIS)

Teixeira, W.; Fonseca, A.C.; Poupeau, G.; Padilha, A.V.; Zapparolli, L.H.; Kawashita, K.; Khoury, M.C.

1985-01-01

The results obtained from isotopic dating techniques (Rb-Sr, K-Ar, Pb-Pb and fission tracks) applied to samples from the southern region of Sao Francisco craton (Mg, Brazil) are discussed. Rb-Sr and Pb-Pb ages, in total rock, allowed the determination of crust enlargement, with eventual modifications of the pre-existing crust, during the Late Archean period (3000 to 2600 million years) and the Inferior Proterozoic period (2400 to 2100 m.y.). Three main cooling periods of time were determined by K-Ar dating of mica, amphiboles and total rock at the craton border: 2200 to 1700 m.y., 1300 to 1100 m.y. and 900 to 400 m.y. related, respectively, to superposition of three cycles: Transamazonico, Uruacuano and Brasiliano. Cooling below 110 0 C, detected by the fission track method applied to apatites, pointed out an age of 850 m.y. at the internal parts and 550 m.y. at the craton periphery, thus showing a progressive action of Brazilian marginal movable zones in the studied region. The application of these two techniques together enabled the evaluation of the rocks cooling shape. Cooling of these samples was complex between 2700 and 2200 m.y. and slow from 2000 m.y. onwards. The integrated treatment of data from the various dating techniques is of great importance to know the geotectonic evolution of ancient polycyclic sites. (C.L.B.) [pt

A Fully-Distributed Heuristic Algorithm for Control of Autonomous Vehicle Movements at Isolated Intersections

Directory of Open Access Journals (Sweden)

Abdallah A. Hassan

2014-12-01

Full Text Available Optimizing autonomous vehicle movements through roadway intersections is a challenging problem. It has been demonstrated in the literature that traditional traffic control, such as traffic signal and stop sign control are not optimal especially for heavy traffic demand levels. Alternatively, centralized autonomous vehicle control strategies are costly and not scalable given that the ability of a central controller to track and schedule the movement of hundreds of vehicles in real-time is questionable. Consequently, in this paper a fully distributed algorithm is proposed where vehicles in the vicinity of an intersection continuously cooperate with each other to develop a schedule that allows them to safely proceed through the intersection while incurring minimum delay. Unlike other distributed approaches described in the literature, the wireless communication constraints are considered in the design of the control algorithm. Specifically, the proposed algorithm requires vehicles heading to an intersection to communicate only with neighboring vehicles, while the lead vehicles on each approach lane share information to develop a complete intersection utilization schedule. The scheduling rotates between vehicles to identify higher traffic volumes and favor vehicles coming from heavier lanes to minimize the overall intersection delay. The simulated experiments show significant reductions in the average delay using the proposed approach compared to other methods reported in the literature and reduction in the maximum delay experienced by a vehicle especially in cases of heavy traffic demand levels.

Radar Men on the Moon: A Brief Survey of Fission Surface Power Studies

International Nuclear Information System (INIS)

Bennett, Gary L.

2008-01-01

This paper reviews some of the salient fission surface power studies, including those dating back to the early SNAP (Systems for Nuclear Auxiliary Power) program. Particular attention will be focused on the more recent Space Exploration Initiative (including the related Synthesis Group report) and Vision for Space Exploration. Commonalties in these studies will be noted; for example, many studies have shown that powers in the range of 100 kWe are required for human-tended bases on the Moon and Mars. Just as advanced human civilizations depend upon electrical power so will advanced, human-occupied lunar and Mars bases with powers rising into the megawatt level for bases with manufacturing and resource utilization capabilities. The role of radioisotope power sources will also be noted

Radar Men on the Moon: A Brief Survey of Fission Surface Power Studies

Science.gov (United States)

Bennett, Gary L.

2008-01-01

This paper reviews some of the salient fission surface power studies, including those dating back to the early SNAP (Systems for Nuclear Auxiliary Power) program. Particular attention will be focused on the more recent Space Exploration Initiative (including the related Synthesis Group report) and Vision for Space Exploration. Commonalties in these studies will be noted; for example, many studies have shown that powers in the range of 100 kWe are required for human-tended bases on the Moon and Mars. Just as advanced human civilizations depend upon electrical power so will advanced, human-occupied lunar and Mars bases with powers rising into the megawatt level for bases with manufacturing and resource utilization capabilities. The role of radioisotope power sources will also be noted.

A note on frequency distributions of fission tracks in apatite

International Nuclear Information System (INIS)

He, Z.; Lerche, I.

1989-01-01

Two different formulae, both purportedly describing track length reduction in apatite, are converted to forms useful in prediction of track length distributions along sedimentary burial history paths. Using the formalism, track length distribution data from four NW Canning Basin wells are inverted to determine the physical (chemical) parameters associated with the models as well as the heat flux variation with time. For each formula the resulting physical parameters are consistent among the wells tested but differ from laboratory-derived parameter values, and the thermal histories are consistent with those inferred from geological data. Comparison of the two models shows no evidence that one model should be favored over the other based on the data available. It is also shown that the resolution of the parameters is dependent not only on the quantity of the data but also on the ''quality'' -explicitly upon the variation and distribution with depth. (author)

Apatite fission-track evidence of widespread Eocene heating and exhumation in the Yukon-Tanana Upland, interior Alaska

Science.gov (United States)

Dusel-Bacon, C.; Murphy, J.M.

2001-01-01

We present an apatite fission-track (AFT) study of five plutonic rocks and seven metamorphic rocks across 310 km of the Yukon-Tanana Upland in east-central Alaska. Samples yielding ???40 Ma AFT ages and mean confined track lengths > 14 ??m with low standard deviations cooled rapidly from >120??C to 40 Ma suggest partial annealing and, therefore, lower maximum temperatures (???90-105??C). A few samples with single-grain ages of ???20 Ma apparently remained above ???50??C after initial cooling. Although the present geothermal gradient in the western Yukon-Tanana Upland is ???32??C/km, it could have been as high as 45??C/km during a widespread Eocene intraplate magmatic episode. Prior to rapid exhumation, samples with ???40 Ma AFT ages were >3.8-2.7 km deep and samples with >50 Ma AFT ages were >3.3-2.0 km deep. We calculate a 440-320 m/Ma minimum rate for exhumation of all samples during rapid cooling. Our AFT data, and data from rocks north of Fairbanks and from the Eielson deep test hole, indicate up to 3 km of post-40 Ma vertical displacement along known and inferred northeast-trending high-angle faults. The predominance of 40-50 Ma AFT ages throughout the Yukon-Tanana Upland indicates that, prior to the post-40 Ma relative uplift along some northeast-trending faults, rapid regional cooling and exhumation closely followed the Eocene extensional magmatism. We propose that Eocene magmatism and exhumation were somehow related to plate movements that produced regional-scale oroclinal rotation, northward translation of outboard terranes, major dextral strike-slip faulting, and subduction of an oceanic spreading ridge along the southern margin of Alaska.

WE-AB-BRA-12: Virtual Endoscope Tracking for Endoscopy-CT Image Registration

International Nuclear Information System (INIS)

Ingram, W; Rao, A; Wendt, R; Court, L; Yang, J; Beadle, B

2015-01-01

Purpose: The use of endoscopy in radiotherapy will remain limited until we can register endoscopic video to CT using standard clinical equipment. In this phantom study we tested a registration method using virtual endoscopy to measure CT-space positions from endoscopic video. Methods: Our phantom is a contorted clay cylinder with 2-mm-diameter markers in the luminal surface. These markers are visible on both CT and endoscopic video. Virtual endoscope images were rendered from a polygonal mesh created by segmenting the phantom’s luminal surface on CT. We tested registration accuracy by tracking the endoscope’s 6-degree-of-freedom coordinates frame-to-frame in a video recorded as it moved through the phantom, and using these coordinates to measure CT-space positions of markers visible in the final frame. To track the endoscope we used the Nelder-Mead method to search for coordinates that render the virtual frame most similar to the next recorded frame. We measured the endoscope’s initial-frame coordinates using a set of visible markers, and for image similarity we used a combination of mutual information and gradient alignment. CT-space marker positions were measured by projecting their final-frame pixel addresses through the virtual endoscope to intersect with the mesh. Registration error was quantified as the distance between this intersection and the marker’s manually-selected CT-space position. Results: Tracking succeeded for 6 of 8 videos, for which the mean registration error was 4.8±3.5mm (24 measurements total). The mean error in the axial direction (3.1±3.3mm) was larger than in the sagittal or coronal directions (2.0±2.3mm, 1.7±1.6mm). In the other 2 videos, the virtual endoscope got stuck in a false minimum. Conclusion: Our method can successfully track the position and orientation of an endoscope, and it provides accurate spatial mapping from endoscopic video to CT. This method will serve as a foundation for an endoscopy-CT registration

WE-AB-BRA-12: Virtual Endoscope Tracking for Endoscopy-CT Image Registration

Energy Technology Data Exchange (ETDEWEB)

Ingram, W; Rao, A; Wendt, R; Court, L [The University of Texas MD Anderson Cancer Center, Houston, TX (United States); The University of Texas Graduate School of Biomedical Sciences, Houston, TX (United States); Yang, J; Beadle, B [The University of Texas MD Anderson Cancer Center, Houston, TX (United States)

2015-06-15

Purpose: The use of endoscopy in radiotherapy will remain limited until we can register endoscopic video to CT using standard clinical equipment. In this phantom study we tested a registration method using virtual endoscopy to measure CT-space positions from endoscopic video. Methods: Our phantom is a contorted clay cylinder with 2-mm-diameter markers in the luminal surface. These markers are visible on both CT and endoscopic video. Virtual endoscope images were rendered from a polygonal mesh created by segmenting the phantom’s luminal surface on CT. We tested registration accuracy by tracking the endoscope’s 6-degree-of-freedom coordinates frame-to-frame in a video recorded as it moved through the phantom, and using these coordinates to measure CT-space positions of markers visible in the final frame. To track the endoscope we used the Nelder-Mead method to search for coordinates that render the virtual frame most similar to the next recorded frame. We measured the endoscope’s initial-frame coordinates using a set of visible markers, and for image similarity we used a combination of mutual information and gradient alignment. CT-space marker positions were measured by projecting their final-frame pixel addresses through the virtual endoscope to intersect with the mesh. Registration error was quantified as the distance between this intersection and the marker’s manually-selected CT-space position. Results: Tracking succeeded for 6 of 8 videos, for which the mean registration error was 4.8±3.5mm (24 measurements total). The mean error in the axial direction (3.1±3.3mm) was larger than in the sagittal or coronal directions (2.0±2.3mm, 1.7±1.6mm). In the other 2 videos, the virtual endoscope got stuck in a false minimum. Conclusion: Our method can successfully track the position and orientation of an endoscope, and it provides accurate spatial mapping from endoscopic video to CT. This method will serve as a foundation for an endoscopy-CT registration

Yields of some fragments on 235U, 238U and 239Pu fission due to the neutrons of the SBR-1 reactors

International Nuclear Information System (INIS)

Yurova, L.N.; Bushuev, A.V.; Ozerkov, V.N.; Chachin, V.V.; Zvonarev, A.V.; Liforov, Yu.G.; Koleganov, Yu.V.; Miller, V.V.; Gorbatyuk, O.V.

1979-01-01

Determined are the values of the yields of fission fragments in spectrum close to that of the neutron fission using the data on yields at fission by thermal neutrons. The relation between the activities of fragments in samples irradiated in the BR-1 center and in the thermal colomn of the same reactor was measured with the help of the Ge(Li). The relative rate of fissions in uranium and plutonium samples in the center or in thermal colomn were measured by track detectors. The comparison of the yields obtained and the data of other authors is being made

Post-scission fission theory: Neutron emission in fission

International Nuclear Information System (INIS)

Madland, D.G.

1997-01-01

A survey of theoretical representations of two of the observables in neutron emission in fission is given, namely, the prompt fission neutron spectrum N (E) and the average prompt neutron multiplicity bar ν p . Early representations of the two observables are presented and their deficiencies are discussed. This is followed by summaries and examples of recent theoretical models for the calculation of these quantities. Emphasis is placed upon the predictability and accuracy of the recent models. In particular, the dependencies of N (E) and bar ν p upon the fissioning nucleus and its excitation energy are treated. Recent work in the calculation of the prompt fission neutron spectrum matrix N (E, E n ), where E n is the energy of the neutron inducing fission, is then discussed. Concluding remarks address the current status of our ability to calculate these observables with confidence, the direction of future theoretical efforts, and limitations to current (and future) approaches

A Practical Approach to Starting Fission Surface Power Development

International Nuclear Information System (INIS)

Mason, Lee

2006-01-01

The Prometheus Power and Propulsion Program has been reformulated to address NASA needs relative to lunar and Mars exploration. Emphasis has switched from the Jupiter Icy Moons Orbiter (JIMO) flight system development to more generalized technology development addressing Fission Surface Power (FSP) and Nuclear Thermal Propulsion (NTP). Current NASA budget priorities and the deferred mission need date for nuclear systems prohibit a fully funded reactor Flight Development Program. However, a modestly funded Advanced Technology Program can and should be conducted to reduce the risk and cost of future flight systems. A potential road-map for FSP technology development leading to possible flight applications could include three elements: 1) Conceptual Design Studies, 2) Advanced Component Technology, and 3) Non-Nuclear System Testing. The Conceptual Design Studies would expand on recent NASA and DOE analyses while increasing the depth of study in areas of greatest uncertainty such as reactor integration and human-rated shielding. The Advanced Component Technology element would address the major technology risks through development and testing of reactor fuels, structural materials, primary loop components, shielding, power conversion, heat rejection, and power management and distribution (PMAD). The Non-Nuclear System Testing would provide a modular, technology test-bed to investigate and resolve system integration issues. (author)

Design of pellet surface grooves for fission gas plenum

International Nuclear Information System (INIS)

Carter, T.J.; Jones, L.R.; Macici, N.; Miller, G.C.

1986-01-01

In the Canada deuterium uranium pressurized heavy water reactor, short (50-cm) Zircaloy-4 clad bundles are fueled on-power. Although internal void volume within the fuel rods is adequate for the present once-through natural uranium cycle, the authors have investigated methods for increasing the internal gas storage volume needed in high-power, high-burnup, experimental ceramic fuels. This present work sought to prove the methodology for design of gas storage volume within the fuel pellets - specifically the use of grooves pressed or machined into the relatively cool pellet/cladding interface. Preanalysis and design of pellet groove shape and volume was accomplished using the TRUMP heat transfer code. Postirradiation examination (PIE) was used to check the initial design and heat transfer assumptions. Fission gas release was found to be higher for the grooved pellet rods than for the comparison rods with hollow or unmodified pellets. This had been expected from the initial TRUMP thermal analyses. The ELESIM fuel modeling code was used to check in-reactor performance, but some modifications were necessary to accommodate the loss of heat transfer surface to the grooves. It was concluded that for plenum design purposes, circumferential pellet grooves could be adequately modeled by the codes TRUMP and ELESIM

Fission products collecting devices

International Nuclear Information System (INIS)

Matsumoto, Hiroshi

1979-01-01

Purpose: To enable fission products trap with no contamination to coolants and cover gas by the provision of a fission products trap above the upper part of a nuclear power plant. Constitution: Upon fuel failures in a reactor core, nuclear fission products leak into coolants and move along the flow of the coolants to the coolants above the reactor core. The fission products are collected in a trap container and guided along a pipeline into fission products detector. The fission products detector monitors the concentration of the fission products and opens the downstream valve of the detector when a predetermined concentration of the fission products is detected to introduce the fission products into a waste gas processing device and release them through the exhaust pipe. (Seki, T.)

L'intersectionnalité contre l'intersection

NARCIS (Netherlands)

Chauvin, S.; Jaunait, A.

2015-01-01

Intersectionality against intersection. Is the notion of intersectionality doomed to being part of the problem it designates? Intersectionality theory was not developed to merely point at intersections but to capture subject positions made invisible by dominant systems of normative representation.

Nuclear fission and reactions

International Nuclear Information System (INIS)

Anon.

1975-01-01

The nuclear fission research programs are designed to elucidate basic features of the fission process. Specifically, (1) factors determining how nucleons of a fissioning nucleus are distributed between two fission fragments, (2) factors determining kinetic energy and excitation energies of fragments, and (3) factors controlling fission lifetimes. To these ends, fission studies are reported for several heavy elements and include investigations of spontaneous and neutron-induced fission, heavy ion reactions, and high energy proton reactions. The status of theoretical research is also discussed. (U.S.)

Status update on the NIFFTE high precision fission cross section measurement program

International Nuclear Information System (INIS)

Laptev, Alexander B.; Tovesson, Fredrik; Burgett, Eric; Greife, Uwe; Grimes, Steven; Heffner, Michael D.; Hertel, Nolan E.; Hill, Tony; Isenhower, Donald; Klay, Jennifer L.; Kornilov, Nickolay; Kudo, Ryuho; Loveland, Walter; Massey, Thomas; McGrath, Chris; Pickle, Nathan; Qu, Hai; Sharma, Sarvagya; Snyder, Lucas; Thornton, Tyler; Towell, Rusty S.; Watson, Shon

2010-01-01

The Neutron Induced Fission Fragment Tracking Experiment (NIFFTE) program has been underway for nearly two years. The program's mission is to measure fission cross sections of the primary fissionable and fissile materials ( 235 U, 239 Pu, 238 U) as well as the minor actinides across energies from approximately 50 keV up to 20 MeV with an absolute uncertainty of less than one percent while investigating energy ranges from below an eV to 600 MeV. This basic nuclear physics data is being reinvestigated to support the next generation power plants and a fast burner reactor program. Uncertainties in the fast, resolved and unresolved resonance regions in plutonium and other transuranics are extremely large, dominating safety margins in the next generation nuclear power plants and power plants of today. This basic nuclear data can be used to support all aspects of the nuciear renaissance. The measurement campaign is utilizing a Time Projection Chamber or TPC as the tool to measure these cross sections to these unprecedented levels. Unlike traditional fission cross section measurements using time-of-flight and a multiple fission foil configurations in which fission cross sections in relation to that of 235 U are performed, the TPC project uses time-of-flight and hydrogen as the benchmark cross section. Using the switch to hydrogen, a simple, smooth cross section that can be used which removes the uncertainties associated with the resolved and unresolved resonances in 235 U.

Structure of heavy-ion tracks in zircon

International Nuclear Information System (INIS)

Braunshausen, G.; Bursill, L.A.; Vetter, J.; Spohr, R.

1990-01-01

Gem quality zirconas (ZrSiO 4 ) were irradiated with 14MeV/u Pb ions. Observations of heavy-ion tracks confirmed that fission or heavy-ion irradiation damage is confined to a 50-100 Aangstroem core region, which has undergone a crystalline-glass phase transition. 3 refs., 3 figs

Fission-product yields for thermal-neutron fission of curium-243

International Nuclear Information System (INIS)

Breederland, D.G.

1982-01-01

Cumulative fission yields for 25 gamma rays emitted during the decay of 23 fission products produced by thermal-neutron fission of 243 Cm have been determined. Using Ge(Li) spectroscopy, 33 successive pulse-height spectra of gamma rays emitted from a 77-ng sample of 243 Cm over a period of approximately two and one-half months were analyzed. Reduction of these spectra resulted in the identification and matching of gamma-ray energies and half-lives to specific radionuclides. Using these results, 23 cumulative fission-product yields were calculated. Only those radionuclides having half-lives between 6 hours and 65 days were observed. Prior to this experiment, no fission-product yields had been recorded for 243 Cm

Fusion and fission of atomic clusters: recent advances

DEFF Research Database (Denmark)

Obolensky, Oleg I.; Solov'yov, Ilia; Solov'yov, Andrey V.

2005-01-01

We review recent advances made by our group in finding optimized geometries of atomic clusters as well as in description of fission of charged small metal clusters. We base our approach to these problems on analysis of multidimensional potential energy surface. For the fusion process we have...... developed an effective scheme of adding new atoms to stable cluster geometries of larger clusters in an efficient way. We apply this algorithm to finding geometries of metal and noble gas clusters. For the fission process the analysis of the potential energy landscape calculated on the ab initio level...... of theory allowed us to obtain very detailed information on energetics and pathways of the different fission channels for the Na^2+_10 clusters....

Probability of ternary fission of 93Nb andnat Ag nuclei induced by 0.8-1.8 GeV photons

International Nuclear Information System (INIS)

Lima, D.A. de; Milomen, W.C.C.; Tavares, O.A.P.

1989-01-01

The yields of ternary fission of 93 Nb and nat Ag nuclei induced by bremsstrahlung photons of 0.8, 1.0, 1.4 and 1.8 GeV end-point energies have been measured by using the 2 Π-forward geometry with thick target metal foils in contact with makrofol polycarbonate sheets as fission-track detectors. Absolute mean cross sections per photon in the range 0.8-1.8 GeV have been obtained as 0.3 ± 0.3 μb and 0.5 ± μb, respectively, for 93 Nb and nat Ag nuclei. These correspond to a probability of ternary fission of approx. 10 -5 for both nuclei. Results are discussed and compared with previous ternary fission data obtained for nuclei of A [pt

Neutron emission as a probe of fusion-fission and quasi-fission dynamics

International Nuclear Information System (INIS)

Hinde, D.J.

1991-01-01

Pre- and post scission neutron yeilds have been measured as a function of projectile mass, compound nucleus fissility, and fission mass-split and total kinetic energy (TKE) for 27 fusion-fission and quasi-fission reactions induced by beams of 16,18 O, 40 Ar and 64 Ni. A new method of interpretation of experimental pre-scission neutron multiplicities ν-pre and mean kinetic energies ε ν allows the extraction of fission time scales with much less uncertainty than previously, all fusion-fission results being consistent with a dynamical time scale of (35±15) x 10 -21 s for symmetric fission. All reactions show that ν-pre falls quite rapidly with increasing mass-asymmetry; evidence is presented that for fusion-fission reactions this is partly due to a reduction of the dynamical fission time scale with mass-asymmetry. For quasi-fission, the data indicate that the pre-scission multiplicity and mean neutron kinetic energy are very sensitive to the final mass-asymmetry, but that the time scale is virtually independent of mass-asymmetry. It is concluded that for fusion-fission there is no dependence of ν-pre on TKE, whilst for 64 Ni-induced quasi-fission reactions, a strong increase of ν-pre with decreasing TKE is observed, probably largely caused by neutron emission during the acceleration time of the fission fragments in these fast reactions. Interpretation of post-scission multiplicities in terms of fragment excitation energies leads to deduced time scales consistent with those determined from the pre-scission data. 54 refs., 17 tabs., 25 figs

Energy released in fission

International Nuclear Information System (INIS)

James, M.F.

1969-05-01

The effective energy released in and following the fission of U-235, Pu-239 and Pu-241 by thermal neutrons, and of U-238 by fission spectrum neutrons, is discussed. The recommended values are: U-235 ... 192.9 ± 0.5 MeV/fission; U-238 ... 193.9 ± 0.8 MeV/fission; Pu-239 ... 198.5 ± 0.8 MeV/fission; Pu-241 ... 200.3 ± 0.8 MeV/fission. These values include all contributions except from antineutrinos and very long-lived fission products. The detailed contributions are discussed, and inconsistencies in the experimental data are pointed out. In Appendix A, the contribution to the total useful energy release in a reactor from reactions other than fission are discussed briefly, and in Appendix B there is a discussion of the variations in effective energy from fission with incident neutron energy. (author)

The evaluation for reference fission yield of 238U fission

International Nuclear Information System (INIS)

Liang Qichang; Liu Tingjin

1998-01-01

In the fission yield data evaluation and measurement, the reference yield is very important, good or poor recommended or measurement values depend upon the reference data to a great extent. According to the CRP's requirement, the evaluation of reference fission yields have been and will be carried out in CNDC, as a part of the whole work (contract No.9504/R 0 /Regular Budget Fund), the evaluation for 29 reference fission yields of 15 product nuclides from 238 U fission have been completed

Stereoscopic Feature Tracking System for Retrieving Velocity of Surface Waters

Science.gov (United States)

Zuniga Zamalloa, C. C.; Landry, B. J.

2017-12-01

The present work is concerned with the surface velocity retrieval of flows using a stereoscopic setup and finding the correspondence in the images via feature tracking (FT). The feature tracking provides a key benefit of substantially reducing the level of user input. In contrast to other commonly used methods (e.g., normalized cross-correlation), FT does not require the user to prescribe interrogation window sizes and removes the need for masking when specularities are present. The results of the current FT methodology are comparable to those obtained via Large Scale Particle Image Velocimetry while requiring little to no user input which allowed for rapid, automated processing of imagery.

Fission yield covariance generation and uncertainty propagation through fission pulse decay heat calculation

International Nuclear Information System (INIS)

Fiorito, L.; Diez, C.J.; Cabellos, O.; Stankovskiy, A.; Van den Eynde, G.; Labeau, P.E.

2014-01-01

Highlights: • Fission yield data and uncertainty comparison between major nuclear data libraries. • Fission yield covariance generation through Bayesian technique. • Study of the effect of fission yield correlations on decay heat calculations. • Covariance information contribute to reduce fission pulse decay heat uncertainty. - Abstract: Fission product yields are fundamental parameters in burnup/activation calculations and the impact of their uncertainties was widely studied in the past. Evaluations of these uncertainties were released, still without covariance data. Therefore, the nuclear community expressed the need of full fission yield covariance matrices to be able to produce inventory calculation results that take into account the complete uncertainty data. State-of-the-art fission yield data and methodologies for fission yield covariance generation were researched in this work. Covariance matrices were generated and compared to the original data stored in the library. Then, we focused on the effect of fission yield covariance information on fission pulse decay heat results for thermal fission of 235 U. Calculations were carried out using different libraries and codes (ACAB and ALEPH-2) after introducing the new covariance values. Results were compared with those obtained with the uncertainty data currently provided by the libraries. The uncertainty quantification was performed first with Monte Carlo sampling and then compared with linear perturbation. Indeed, correlations between fission yields strongly affect the uncertainty of decay heat. Eventually, a sensitivity analysis of fission product yields to fission pulse decay heat was performed in order to provide a full set of the most sensitive nuclides for such a calculation

Thermal and tectonic history of the Barrandian Lower Paleozoic, Czech Republic: is there a fission-track evidence for Carboniferous-Permian overburden and pre-Westphalian alpinotype thrusting? (Critical comments on the paper by Ulrich Mann and Günter A. Wagner)

Czech Academy of Sciences Publication Activity Database

Filip, Jiří; Suchý, V.

2004-01-01

Roč. 79, č. 2 (2004), s. 107-112 ISSN 1214-1119 R&D Projects: GA AV ČR(CZ) IAA3012703 Grant - others:DFG(DE) Ma 1861/1-1 Keywords : apatite fission-track analysis * Barrandian * Variscan Orogeny Subject RIV: DB - Geology ; Mineralogy http://www.geology.cz/bulletin/contents/2004/vol79no2/bullgeosci200402107.pdf

FREVAP-6, Metal Fission Products Release from HTGR Fuel Elements

International Nuclear Information System (INIS)

Pierce, V.H.

2005-01-01

1 - Description of problem or function: The FREVAP type of code for estimating the release of longer-lived metallic fission products from HTGR fuel elements has been developed to take into account the combined effects of the retention of metallic fission products by fuel particles and the rather strong absorption of these fission products by the graphite of the fuel elements. Release calculations are made on the basis that the loss of fission product nuclides such as strontium, cesium, and barium is determined by their evaporation from the graphite surfaces and their transpiration induced by the flowing helium coolant. The code is devised so that changes of fission rate (fuel element power), fuel temperature, and graphite temperature may be incorporated into the calculation. Temperature is quite important in determining release because, in general, both release from fuel particles and loss by evaporation (transpiration) vary exponentially with the reciprocal of the absolute temperature. NESC0301/02: This version differs from the previous one in the following points: The source and output files were converted from BCD to ASCII coding. 2 - Method of solution: A problem is defined as having a one-dimensional segment made up of three parts - (1) the fission product source (fuel particles) in series with, (2) a non-source and absorption part (element graphite) and (3) a surface for evaporation to the coolant (graphite-helium interface). More than one segment may be connected (possibly segments stacked axially) by way of the coolant. At any given segment, a continuity equation is solved assuming equilibrium between the source term, absorption term, evaporation at coolant interface and the partial pressure of the fission product isotope in the coolant. 3 - Restrictions on the complexity of the problem - Maxima of: 5 isotopes; 10 time intervals for time-dependent variable; 49 segments (times number of isotopes); 5 different output print time-steps

Computer program FPIP-REV calculates fission product inventory for U-235 fission

Science.gov (United States)

Brown, W. S.; Call, D. W.

1967-01-01

Computer program calculates fission product inventories and source strengths associated with the operation of U-235 fueled nuclear power reactor. It utilizes a fission-product nuclide library of 254 nuclides, and calculates the time dependent behavior of the fission product nuclides formed by fissioning of U-235.

Intersectionality research in counseling psychology.

Science.gov (United States)

Grzanka, Patrick R; Santos, Carlos E; Moradi, Bonnie

2017-10-01

This article introduces the special section on intersectionality research in counseling psychology. Across the 4 manuscripts that constitute this special section, a clear theme emerges: a need to return to the roots and politics of intersectionality. Importantly, the 2 empirical articles in this special section (Jerald, Cole, Ward, & Avery, 2017; Lewis, Williams, Peppers, & Gadson, 2017) are studies of Black women's experiences: a return, so to speak, to the subject positions and social locations from which intersectionality emanates. Shin et al. (2017) explore why this focus on Black feminist thought and social justice is so important by highlighting the persistent weaknesses in how much research published in leading counseling psychology journals has tended to use intersectionality as a way to talk about multiple identities, rather than as a framework for critiquing systemic, intersecting forms of oppression and privilege. Shin and colleagues also point to the possibilities intersectionality affords us when scholars realize the transformative potential of this critical framework. Answers to this call for transformative practices are foregrounded in Moradi and Grzanka's (2017) contribution, which surveys the interdisciplinary literature on intersectionality and presents a series of guidelines for using intersectionality responsibly. We close with a discussion of issues concerning the applications of intersectionality to counseling psychology research that spans beyond the contributions of each manuscript in this special section. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Ejection of Uranium Atoms from UO{sub 2} by Fission Fragments

Energy Technology Data Exchange (ETDEWEB)

Nilsson, Goesta

1964-02-15

The numbers of uranium atoms ejected from the surface of sintered plates of UO{sub 2} by fission fragments have been measured over the fission density range 5x10{sup 15} to 7x10{sup 16} fissions/cm{sup 3}. The number of uranium atoms ejected per escaping fragment was about 9. The measurements were performed by irradiating the plates in vacuum and collecting a fraction of the uranium atoms ejected on catcher foils. The amount collected was determined by fission counting. Saturation of the amount collected, as reported by Rogers and Adam, was not observed. The numbers of uranium atoms ejected as knock-ons under the same experimental conditions have been calculated. The reasonably close agreement between the experimental and theoretical values indicates that, under the prevailing experimental conditions, mainly knock-ons are ejected. Other ejection mechanisms, e. g. evaporation of material in thermal spikes, are probably insignificant; this is in contrast to the usual interpretation of the ejection process. The mean range in UO{sub 2}, of fission products of mass number 140 was found to be 7.37 {+-} 0. 05 mg/cm{sup 2} by direct gamma spectrometric, determination of the fraction of {sup 140}La escaping from the surface of the plates.

INTERSECTIONAL DISCRIMINATION AGAINST CHILDREN

DEFF Research Database (Denmark)

Ravnbøl, Camilla Ida

This paper adds a perspective to existing research on child protection by engaging in a debate on intersectional discrimination and its relationship to child protection. The paper has a twofold objective, (1) to further establish intersectionality as a concept to address discrimination against...... children, and (2) to illustrate the importance of addressing intersectionality within rights-based programmes of child protection....

Spectral effects in low-dose fission and fusion neutron irradiated metals and alloys

International Nuclear Information System (INIS)

Heinisch, H.L.; Atkin, S.D.; Martinez, C.

1986-04-01

Flat miniature tensile specimens were irradiated to neutron fluences up to 9 x 10 22 n/m 2 in the RTNS-II and in the Omega West Reactor. Specimen temperatures were the same in both environments, with runs being made at both 90 0 C and 290 0 C. The results of tensile tests on AISI 316 stainless steel, A302B pressure vessel steel and pure copper are reported here. The radiation-induced changes in yield strength as a function of neutron dose in each spectrum are compared. The data for 316 stainless steel correlate well on the basis of displacements per atom (dpa), while those for copper and A302B do not. In copper the ratio of fission dpa to 14 MeV neutron dpa for a given yield stress change is about three to one. In A302B pressure vessel steel this ratio is more than three at lower fluences, but the yield stress data for fission and 14 MeV neutron-irradiated A302B steel appears to coalesce or intersect at the higher fluences

Comparisons of fission track age-determination and radioactivation analysis among radiation fields. Characteristic values for pneumatic tube, JRR-3M PN2

Energy Technology Data Exchange (ETDEWEB)

Suzuki, Tatsuro [Kagoshima Univ. (Japan). Faculty of Education; Tomura, Kenji

1996-01-01

It is necessary for Fission track age determination and radioactivation analysis to define the energy spectrum of a reactor neutron as the basis for calculating the nuclear reaction rate. This study was made aiming to define the spectrum for PN2 pneumatic tube of No. 3 plant of Japan Atomic Energy Research Institute (JAERI). Characteristics such as conventional flux, cross reaction, neutron temperature and integral fast flux were examined for 3 facilities; JRR-2, JRR-4 and JRR-3M. And the neutron spectrum for each facility was estimated based on the assumptions; Maxwell distribution for thermal neutrons, 1/E for intermediate neutrons and Watt`s formula for fast neutrons. The present results showed that the spectrum for JRR-3M, PN2 was discontinuous in the range from the intermediate to the fast neutron, whereas those for other facilities were found considerably improved. (M.N.)

A Simple Free Surface Tracking Model for Multi-dimensional Two-Fluid Approaches

International Nuclear Information System (INIS)

Lee, Seungjun; Yoon, Han Young

2014-01-01

The development in two-phase experiments devoted to find unknown phenomenological relationships modified conventional flow pattern maps into a sophisticated one and even extended to the multi-dimensional usage. However, for a system including a large void fraction gradient, such as a pool with the free surface, the flow patterns varies spatially throughout small number of cells and sometimes results in an unstable and unrealistic prediction of flows at the large gradient void fraction cells. Then, the numerical stability problem arising from the free surface is the major interest in the analyses of a passive cooling pool convecting the decay heat naturally, which has become a design issue to increase the safety level of nuclear reactors recently. In this research, a new and simple free surface tracking method combined with a simplified topology map is presented. The method modified the interfacial drag coefficient only for the cells defined as the free surface. The performance is shown by comparing the natural convection analysis of a small scale pool with respect to single- and two-phase condition. A simple free surface tracking model with a simplified topology map is developed

Prompt Gamma Radiation from Fragments in the Thermal Fission of 235U

International Nuclear Information System (INIS)

Albinsson, H.; Lindow, L.

1970-06-01

Measurements were made on the gamma radiation emitted from fission fragments in slow neutron induced fission of 235 U. The fragments were detected with solid state detectors of the surface barrier type and the gamma radiation with a Nal(Tl) scintillator. Mass selection was used so that the gamma radiation could be measured as a function of fragment mass. Time discrimination between the fission gammas and the prompt neutrons released in the fission process was employed to reduce the background. The gamma radiation emitted during different time intervals after the fission event was studied with the help of a collimator, the position of which was changed along the path of the fission fragments. In this way a decay curve was obtained from which the life-time of one of the gamma-emitting states could be estimated. The relative yield of the gamma-rays was determined as a function of mass for different gamma-ray energy portions and two specific time intervals after the fission events. Comparisons were made with data obtained from 252 Cf-fission. Attention is drawn to some features which seem to be the same in 235 U and 252 Cf-fission

Mass distribution of fission fragments within the Born-Oppenheimer approximation

Energy Technology Data Exchange (ETDEWEB)

Pomorski, K.; Nerlo-Pomorska, B. [M.C.S. University, Department of Theoretical Physics, Lublin (Poland); Ivanyuk, F.A. [Institute for Nuclear Research, Kiev (Ukraine)

2017-03-15

The fission fragments mass-yield of {sup 236} U is obtained by an approximate solution of the eigenvalue problem of the collective Hamiltonian that describes the dynamics of the fission process whose degrees of freedom are: the fission (elongation), the neck and mass-asymmetry modes. The macroscopic-microscopic method is used to evaluate the potential energy surface. The macroscopic energy part is calculated using the liquid drop model and the microscopic corrections are obtained using a Woods-Saxon single-particle levels. The four-dimensional modified Cassini ovals shape parametrization is used to describe the shape of the fissioning nucleus. The mass tensor is taken within a cranking-type approximation. The final fragment mass distribution is obtained by weighting the adiabatic density distribution in the collective space with the neck-dependent fission probability. The neck degree of freedom is found to play a significant role in determining the final fragment mass distribution. (orig.)

Experimental examination of ternary fission in nuclear track emulsion

Czech Academy of Sciences Publication Activity Database

Mamatkulov, K. Z.; Ambrožová, Iva; Artemenkov, D. A.; Bradnova, V.; Firu, E.; Haiduc, M.; Kákona, Martin; Kattabekov, R. R.; Marey, A.; Neagu, A.; Ploc, Ondřej; Rusakova, V. V.; Stanoeva, R.; Turek, Karel; Zaitsev, A. A.; Zarubin, P. I.; Zarubina, I. G.

2017-01-01

Roč. 48, č. 6 (2017), s. 910-913 ISSN 1063-7796 Institutional support: RVO:61389005 Keywords : angular correlation * nuclear track emulsion Subject RIV: BF - Elementary Particles and High Energy Physics OBOR OECD: Particles and field physics Impact factor: 0.681, year: 2016

Mica fission detectors

International Nuclear Information System (INIS)

Wong, C.; Anderson, J.D.; Hansen, L.; Lehn, A.V.; Williamson, M.A.

1977-01-01

The present development status of the mica fission detectors is summarized. It is concluded that the techniques have been refined and developed to a state such that the mica fission counters are a reliable and reproducible detector for fission events