WorldWideScience

Sample records for surface-effect fast patrol

  1. METHODOLOGY OF THE HYBRID PROPULSION SYSTEM (DMP & DEP FOR TRIMARAN TYPE FAST PATROL BOAT

    Directory of Open Access Journals (Sweden)

    Aulia Widyandari

    2012-04-01

    Full Text Available There are lot of research done to develop a patrol boat, from the modification of hull model until propulsion system equipment. For example the model ship type AMV (Advanced Marine Vehicle was developed starting from the Catamaran, Trimaran and  Pentamaran model. Everything is aimed at obtaining the ship design that has the speed and stability. In addition to achieving high-speed vessel must be equipped with propulsion (Main Power is great, that means the main engine dimensions, auxiliary equipments and fuel tanks is too large. Many Limitations of space on the ship's engine room trimaran vessel is the main obstacle in designing propulsion system. Beside that Patrol boat should have many missions speed, so propulsion system should be designed at that conditions.   Hybrid propulsion is a combination of Diesel Mechanical Propulsion (DMP with Diesel Electric Propulsion (DEP. DMP system is connected directly to the propeller shaft (or through a reduction-gear. DMP has provide more efficiency rate of 95%. While DEP is only able to provide efficiency by 85% - 89% is slightly lower than DMP, but the DEP offers many advantages such as simplicity and suitability in the rotational speed settings, control systems, engine power production Redundancy, Flexibility in the design of equipments layout in engine rooms, noise, vibration and fuel consumption efficiency which affects the lower pollution.   Design of Hybrid Propulsion system can be satisfied and achieved the Power requirements and optimally at all speed condition of patrol boat. Therefore the author made using modeling Maxsurf-11.12 software and carried out various optimization of the choice of main engine, propeller and system conditions for fast patrol boat cruise. 

  2. Perencanaan Simulasi Pengaturan Pembangkitan Daya Pada Kapal Fast Patrol Boat 60 M dengan Propulsi Hybrid

    Directory of Open Access Journals (Sweden)

    Fikri Nuruddin Muzakki

    2017-01-01

    Full Text Available Sistem propulsi hybrid yang memberikan berbagai keuntungan untuk pengoperasian kapal, seperti pertimbangan konsumsi bahan bakar yang rendah, pengaturan kecepatan dengan penggunaan propulsi yang optimal ataupun khusus untuk jenis kapal tertentu. Tentunya sistem propulsi hybrid memiliki kelamahan pula, salah satunya adalah pengaturan pembangkitan daya yang kompleks dibandingkan dengan system propulsi lain. Setiap kecepatan membutuhkan daya yang berbeda dan bahan bakar yang berbeda pula. Keputusan yang kurang tepat dapat mengurangi keunggulan dari pemasangan sistem propulsi hybrid. Oleh karena itu dibutuhkan Decision Support System untuk membantu nahkoda menentukan pengaturan propulsi yang optimal pada kecepatan yang diinginkan dan pada kondisi yang ada pada perairan yang dilalui. Dalam makalah ini dibuat Decision Support System dengan input utama berupa kecepatan dalam knot, service margin, dan kebutuhan listrik. Kecepatan dan sevice margin digunakan untuk menentukan kebutuhan tenaga penggerak dan selanjutnya digunakan untuk analisa alat penggerak. Untuk digunakan referensi nahkoda dapat memilih propulsi yang optimal dengan konsumsi bahan bakar yang minimum, dan dengan jumlah daya yang diperlukan untuk pengoperaian tersebut. Berdasarkan hasil simulasi penggunaan Decision Support System pada kapal Fast Patrol Boat 60 m ini menujukkan pemakaian terbaik pada kecepatan 20 knot dengan menggunakan sistem Shaft Generator pada daya 1181 kW disertai pengoperasian genset pada daya 0 kW dan jumlah pemakaian bahan bakar 482,99 kg per jam.

  3. Virtual patrolling.

    NARCIS (Netherlands)

    van der Vlist, M.; Wismans, Luc Johannes Josephus; van Beek, P.; Suijs, L.C.W.

    2016-01-01

    Approximately 25 per cent of all congestion on motorways is caused by incidents. By virtual patrolling, incidents e.g. queues, accidents and car breakdowns on a road network, can be predicted or detected in an early stage. This early detection and prediction of an incident likely to happen, offers

  4. Virtual patrolling

    NARCIS (Netherlands)

    van der Vlist, M.; Wismans, Luc Johannes Josephus; van Beek, P.; Suijs, L.C.W.

    2016-01-01

    Approximately 25 per cent of all congestion on motorways is caused by incidents. By virtual patrolling, incidents e.g. queues, accidents and car breakdowns on a road network, can be predicted or detected in an early stage. This early detection and prediction of an incident likely to happen, offers

  5. DNR Division of Enforcement Officer Patrol Areas

    Data.gov (United States)

    Minnesota Department of Natural Resources — This theme shows the DNR Division of Enforcement Office Patrol Areas as of January 1, 2003. Patrol areas were defined and verified by Patrol Officers during the fall...

  6. Forest Service patrol captain and patrol commanders report: nationwide study

    Science.gov (United States)

    Deborah J. Chavez; Joanne F. Tynon

    2007-01-01

    This is the third in a series of studies to evaluate perceptions of USDA Forest Service law enforcement personnel of the roles, responsibilities, and issues entailed in their jobs. An e-mail survey was administered to the 79 Forest Service patrol captains and patrol commanders (PCs) across the United States. Seventy completed and returned the questionnaire....

  7. Green Arctic Patrol Vessel

    Science.gov (United States)

    2011-08-01

    Complement Flexible space for hovercraft , airboats, USVs and RHIBs Naval Surface Warfare Center Carderock Division Green Arctic Patrol Vessel 1...through Sea State 3 (SS3). Flexible capability for a variety of organic craft, such as boat, hovercraft and/or Unmanned Underwater Vehicles (UUVs...2.0, Finland 6.0 2.7 2.8 6 1.8 Hovercraft Griffon/500TD 8.04 3.92 2.41 99 5 ~1.5 Hovercraft Griffon/2000TD 12.7 6.1 3.93 450 20

  8. Solar Features - Solar Flares - Patrol

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The H-alpha Flare Patrol identifies time periods each day when the sun is being continuously monitored by select ground-based solar observatories.

  9. Evaluation of arterial service patrol programs.

    Science.gov (United States)

    2009-12-01

    This evaluation of the Arterial Service Patrol named I-64 Traffic Response (TR) is an interim report covering the first full year of operation. This Arterial Service Patrol was part of a regional traffic management strategy to address mobility issues...

  10. Improving mobility : saving lives : safety service patrols

    Science.gov (United States)

    1999-01-01

    This brochure describes how safety service patrols can be of value in minimizing disruption of incidents and maximizing traffic flow. The service patrols are equipped to handle emergencies and are a cost effective component of traffic management syst...

  11. Microsensors for border patrol applications

    Science.gov (United States)

    Falkofske, Dwight; Krantz, Brian; Shimazu, Ron; Berglund, Victor

    2005-05-01

    A top concern in homeland security efforts is the lack of ability to monitor the thousands of miles of open border with our neighbors. It is not currently feasible to continually monitor the borders for illegal intrusions. The MicroSensor System (MSS) seeks to achieve a low-cost monitoring solution that can be efficiently deployed for border patrol applications. The modifications and issues regarding the unique requirements of this application will be discussed and presented. The MicroSensor System was developed by the Defense Microelectronics Activity (DMEA) for military applications, but border patrol applications, with their unique sensor requirements, demand careful adaptation and modification from the military application. Adaptation of the existing sensor design for border applications has been initiated. Coverage issues, communications needs, and other requirements need to be explored for the border patrol application. Currently, border patrol has a number of deficiencies that can be addressed with a microsensor network. First, a distributed networked sensor field could mitigate the porous border intruder detection problem. Second, a unified database needs to be available to identify aliens attempting to cross into the United States. This database needs to take unique characteristics (e.g. biometrics, fingerprints) recovered from a specialized field unit to reliably identify intruders. Finally, this sensor network needs to provide a communication ability to allow border patrol officers to have quick access to intrusion information as well as equipment tracking and voice communication. MSS already addresses the sensing portion of the solution, including detection of acoustic, infrared, magnetic, and seismic events. MSS also includes a low-power networking protocol to lengthen the battery life. In addition to current military requirements, MSS needs a solar panel solution to extend its battery life to 5 years, and an additional backbone communication link

  12. Patrol Officer Daily Noise Exposure.

    Science.gov (United States)

    Gilbertson, Lynn R; Vosburgh, Donna J H

    2015-01-01

    Previous research shows that police officers are at a higher risk for noise induced hearing loss (NIHL). Little data exists on the occupational tasks, outside of the firing range, that might lead to the increased risk of NIHL. The current study collected noise dosimetry from patrol officers in a smaller department and a larger department in southern Wisconsin, United States. The noise dosimeters simultaneously measured noise in three virtual dosimeters that had different thresholds, criterion levels, and exchange rates. The virtual dosimeters were set to: the Occupational Safety and Health Administration (OSHA) hearing conservation criteria (OSHA-HC), the OSHA permissible exposure level criteria (OSHA-PEL), and the American Conference of Governmental Industrial Hygienists (ACGIH). In addition to wearing a noise dosimeter during their respective work days, officers completed a log form documenting the type of task performed, the duration of that task, if the task involved the use of a siren, and officer characteristics that may have influenced their noise exposure, such as the type of dispatch radio unit worn. Analysis revealed that the normalized 8-hour time weighted averages (TWA) for all officers fell below the recommended OSHA and ACGIH exposure limits. The tasks involving the use of the siren had significantly higher levels than the tasks without (p = 0.005). The highest noise exposure levels were encountered when patrol officers were assisting other public safety agencies such as a fire department or emergency medical services (79 dBA). Canine officers had higher normalized 8-hr TWA noise exposure than regular patrol officers (p = 0.002). Officers with an evening work schedule had significantly higher noise exposure than the officers with a day or night work schedule (p = 0.023). There were no significant differences in exposure levels between the two departments (p = 0.22). Results suggest that this study population is unlikely to experience NIHL as

  13. 32 CFR 700.922 - Shore patrol.

    Science.gov (United States)

    2010-07-01

    ... area that can absorb them without danger of disturbance or disorder, the senior officer present shall cause to be established, temporarily or permanently, in charge of an officer, a sufficient patrol of officers, petty officers, and noncommissioned officers to maintain order and suppress any unseemly conduct...

  14. Hanford Patrol Academy demolition sites closure plan

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-30

    The Hanford Site is owned by the U.S. Government and operated by the U.S. Department of Energy, Richland Operations Office. Westinghouse Hanford Company is a major contractor to the U.S. Department of Energy, Richland Operations Office and serves as co-operator of the Hanford Patrol Academy Demolition Sites, the unit addressed in this paper. This document consists of a Hanford Facility Dangerous Waste Part A Permit Application, Form 3 (Revision 4), and a closure plan for the site. An explanation of the Part A Form 3 submitted with this closure plan is provided at the beginning of the Part A section. This Hanford Patrol Academy Demolition Sites Closure Plan submittal contains information current as of December 15, 1994.

  15. The Patrol Boat Navy: An Emergent Force in the Mediterranean

    Science.gov (United States)

    1976-03-01

    patrol boat navies is offered with particular attention given to the Arab -Israeli Conflict, Foreign Power Interests, and the move for Arab ...development of patrol boat navies is offered with particular attention given to the Arab -Israeli Conflict, Foreign Power Interests, and the move for... Arab Independence. Finally, the study serves to illustrate the threat posed by missile-armed patrol craft in emerging navies world-wide. TABLE OF

  16. Hanford Patrol Academy Demolition Sites Closure Plan

    International Nuclear Information System (INIS)

    1992-11-01

    From 1975 to 1991 the Hanford Patrol Academy Demolition Sites (HPADS) were used for demolition events. These demolition events were a form of thermal treatment for spent or abandoned chemical waste. Because the HPADS will no longer be used for this thermal activity, the sites will be closed. Closure will be conducted pursuant to the requirements of the Washington State Department of Ecology (Ecology) Dangerous Waste Regulations, Washington Administrative Code (WAC) 173-303-610 and 40 CFR 270.1. Closure also will satisfy closure requirements of WAC 173-303-680 and for the thermal treatment closure requirements of 40 CFR 265.381. This closure plan presents a description of the HPADS, the history of the waste treated, and the approach that will be followed to close the HPADS. Because dangerous waste does not include the source, special nuclear, and by-product material components of mixed waste, radionuclides are not within the scope of WAC 173-303 or of this closure plan. The information on radionuclides is provided only for general knowledge where appropriate. Only dangerous constituents derived from HPADS operations will be addressed in this closure plan in accordance with WAC 173-303-610(2)(b)(i). The HPADS are actually two distinct soil closure areas within the Hanford Patrol Academy training area

  17. Obstacle Emergence Risk and Road Patrol Policy

    Directory of Open Access Journals (Sweden)

    Kiyoshi Kobayashi

    2012-01-01

    Full Text Available The authors model the emergence processes of road obstacles, such as fallen objects on roads, the deformation and destruction of pavements, and the damage and destruction of road facilities, as counting processes. Especially, in order to take into account the heterogeneity of the emergence risk of a variety of road obstacles, the authors model a mixture Poisson process in which the arrival rate of road obstacles is subject to a probability distribution. In detail, the authors formulate a Poisson-Gamma model expressing the heterogeneity of the arrival rate as a Gamma distribution and formulate the management indicator of the emergence risk of road obstacles. Then, a methodology is developed in order to design a road patrol policy that can minimize the road obstacle risk with a limited amount of budget. Furthermore, the authors empirically verify that it is possible to design road patrol policy based on the emergence risk of actual road obstacles with the proposed methodology, by studying the cases of the application of the methodology to general national roads.

  18. DESIGNING DAILY PATROL ROUTES FOR POLICING BASED ON ANT COLONY ALGORITHM

    Directory of Open Access Journals (Sweden)

    H. Chen

    2015-07-01

    Full Text Available In this paper, we address the problem of planning police patrol routes to regularly cover street segments of high crime density (hotspots with limited police forces. A good patrolling strategy is required to minimise the average time lag between two consecutive visits to hotspots, as well as coordinating multiple patrollers and imparting unpredictability in patrol routes. Previous studies have designed different police patrol strategies for routing police patrol, but these strategies have difficulty in generalising to real patrolling and meeting various requirements. In this research we develop a new police patrolling strategy based on Bayesian method and ant colony algorithm. In this strategy, virtual marker (pheromone is laid to mark the visiting history of each crime hotspot, and patrollers continuously decide which hotspot to patrol next based on pheromone level and other variables. Simulation results using real data testifies the effective, scalable, unpredictable and extensible nature of this strategy.

  19. Patrolling Mechanics of Non-Classical Monocytes in Vascular Inflammation.

    Science.gov (United States)

    Buscher, Konrad; Marcovecchio, Paola; Hedrick, Catherine C; Ley, Klaus

    2017-01-01

    Non-classical monocytes have emerged as the preeminent vascular housekeepers. Continuous intravascular screening is enabled by slow patrolling on the endothelium and allows a rapid response to local perturbations. Intravital imaging has been crucial to elucidate the molecular mechanisms and migratory phenotype of patrolling. In this review, we discuss technical requirements of intravital microscopy such as imaging modalities, labeling strategies, and data analysis. We further focus on patrolling kinetics and adhesion receptors in different organs and vascular beds including arteries during homeostasis and vascular inflammation and define pertinent questions in the field.

  20. Patrolling Mechanics of Non-Classical Monocytes in Vascular Inflammation

    Directory of Open Access Journals (Sweden)

    Konrad Buscher

    2017-12-01

    Full Text Available Non-classical monocytes have emerged as the preeminent vascular housekeepers. Continuous intravascular screening is enabled by slow patrolling on the endothelium and allows a rapid response to local perturbations. Intravital imaging has been crucial to elucidate the molecular mechanisms and migratory phenotype of patrolling. In this review, we discuss technical requirements of intravital microscopy such as imaging modalities, labeling strategies, and data analysis. We further focus on patrolling kinetics and adhesion receptors in different organs and vascular beds including arteries during homeostasis and vascular inflammation and define pertinent questions in the field.

  1. Patrol Detection for Replica Attacks on Wireless Sensor Networks

    OpenAIRE

    Wang, Liang-Min; Shi, Yang

    2011-01-01

    Replica attack is a critical concern in the security of wireless sensor networks. We employ mobile nodes as patrollers to detect replicas distributed in different zones in a network, in which a basic patrol detection protocol and two detection algorithms for stationary and mobile modes are presented. Then we perform security analysis to discuss the defense strategies against the possible attacks on the proposed detection protocol. Moreover, we show the advantages of the proposed protocol by d...

  2. Utah ski patrol: assessing training types and resources.

    Science.gov (United States)

    Sagalyn, Emily B; McDevitt, Marion C; Ernst, Ryan

    2014-12-01

    Skiers and snowboarders incur a variety of injuries and medical emergencies each year at ski resorts. The ski patrol is primarily responsible for initial triage, assessment and stabilization of these problems. The purpose of this study was to subjectively evaluate the type of training, resources, and equipment available to local ski patrols within Utah. Ski patrol directors at ski resorts in Utah were asked to complete a voluntary computerized survey. Of the 14 ski areas in Utah, ski patrol directors representing 8 resorts responded. The majority of patrols in Utah use Outdoor Emergency Care (OEC) as their primary education and certification source. Most programs also include site-specific training in addition to basic certification. All responding resorts had basic first responder equipment, including splinting devices, basic airway management, and hemorrhage control. Six of 8 responding resorts had affiliated clinics, and all had access to aeromedical transport. All of the responding ski patrol directors believed the current training level was adequate. Utah area ski patrollers frequently see trauma-related injuries and have the resources to assess and provide initial immobilization techniques. Many resorts have affiliated clinics with advanced providers, and all have access to aeromedical support to rapidly transfer patients to trauma centers. Medical directors may be of use for training as well as developing extended scope of practice protocols for advanced airway use or medication administration. Patrols may benefit from additional resort-specific training that addresses other frequently seen injuries or illnesses. Copyright © 2014 Wilderness Medical Society. Published by Elsevier Inc. All rights reserved.

  3. Employment of Personnel at the Tucson Border Patrol Station

    Science.gov (United States)

    2017-06-09

    and Sells, Arizona. Tucson Station Border Patrol Agents (BPAs) drive to the border to perform their duties each day and night in different forms of...Station Border Patrol Agents (BPAs) drive to the border to perform their duties each day and night in different forms of personnel employment once...comprised of eight stations responsible for 262 linear miles of border from the New Mexico and Arizona border in the east to Yuma County, Arizona to

  4. Ski patrollers: Reluctant role models for helmet use

    Science.gov (United States)

    Evans, Bruce; Gervais, Jack T.; Heard, Kennon; Valley, Morgan; Lowenstein, Steven R.

    2009-01-01

    Objective Ski helmets reduce the risk of traumatic brain injury (TBI), but usage rates are low. Ski patrollers could serve as role models for helmet use, but little is known about their practices and beliefs. Design A written survey was distributed to ski patrollers attending continuing education conferences. Questions addressed helmet use rates; prior TBI experiences; perceptions of helmet risks and benefits; and willingness to serve as safety role models for the public. To assess predictors of helmet use, odds ratios were calculated, after adjusting for skiing experience. Subjects Ninety-three ski patrollers participated. Main Outcome Self-reported helmet use of 100% while patrolling. Results Helmet use was 23% (95% CI 15–32%). Common reasons for non-use included impaired hearing (35%) and discomfort (29%). Most patrollers believed helmets prevent injuries (90%; 95% CI 84–96%) and that they are safety role models (92%; 95% CI 86–98%). However, many believed helmets encourage recklessness (39%; 95% CI 29–49%) and increase injury risks (16%; 95% CI 7–25%). Three factors predicted 100% helmet use: perceived protection from exposure (OR = 9.68; 95% CI 3.14–29.82) or cold (OR = 5.68; 95% CI 1.27–25.42); and belief that role modeling is an advantage of helmets (OR = 4.06; 95% CI 1.29–12.83). Patrollers who believed helmets encourage recklessness were 8 times less likely to wear helmets (OR = 0.13; 95% CI 0.03–0.58). Conclusions Ski patrollers know helmets reduce serious injury and believe they are role models for the public, but most do not wear helmets regularly. To increase helmet use, manufacturers should address hearing- and comfort-related factors. Education programs should address the belief that helmets encourage recklessness and stress role modeling as a professional responsibility. PMID:19225971

  5. FAST

    DEFF Research Database (Denmark)

    Zuidmeer-Jongejan, Laurian; Fernandez-Rivas, Montserrat; Poulsen, Lars K.

    2012-01-01

    ABSTRACT: The FAST project (Food Allergy Specific Immunotherapy) aims at the development of safe and effective treatment of food allergies, targeting prevalent, persistent and severe allergy to fish and peach. Classical allergen-specific immunotherapy (SIT), using subcutaneous injections...... with aqueous food extracts may be effective but has proven to be accompanied by too many anaphylactic side-effects. FAST aims to develop a safe alternative by replacing food extracts with hypoallergenic recombinant major allergens as the active ingredients of SIT. Both severe fish and peach allergy are caused...... in depth serological and cellular immune analyses will be performed, allowing identification of novel biomarkers for monitoring treatment efficacy. FAST aims at improving the quality of life of food allergic patients by providing a safe and effective treatment that will significantly lower their threshold...

  6. Development of nuclear power plant automated remote patrol system

    International Nuclear Information System (INIS)

    Nakayama, R.; Kubo, K.; Sato, K.; Taguchi, J.

    1984-01-01

    An Automated Remote Patrol System was developed for a remote inspection, observation and monitoring of nuclear power plant's components. This automated remote patrol system consists of; a vehicle moving along a monorail; three rails mounted in a monorail for data transmission and for power supply; an image fiber connected to a TV camera; an arm type mechanism (manipulator) for moving image fiber; a computer for control and data processing and operator's console. Special features of this Automated Remote Patrol System are as follows: The inspection vehicle runs along horizontal and vertical (up/down) monorails. The arm type mechanism (manipulator) on the vehicle is used to move image fiber. Slide type electric collectors are used for data transmission and power supply. Time-division multiplexing is adapted for data transmission. Voice communication is used for controlling mechanisms. Pattern recognition is used for data processing. The experience that has been obtained from a series of various tests is summarized. (author)

  7. Patrol Detection for Replica Attacks on Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Yang Shi

    2011-02-01

    Full Text Available Replica attack is a critical concern in the security of wireless sensor networks. We employ mobile nodes as patrollers to detect replicas distributed in different zones in a network, in which a basic patrol detection protocol and two detection algorithms for stationary and mobile modes are presented. Then we perform security analysis to discuss the defense strategies against the possible attacks on the proposed detection protocol. Moreover, we show the advantages of the proposed protocol by discussing and comparing the communication cost and detection probability with some existing methods.

  8. 46 CFR 193.05-1 - Fire detecting, manual alarm, and supervised patrol systems.

    Science.gov (United States)

    2010-10-01

    ... Required § 193.05-1 Fire detecting, manual alarm, and supervised patrol systems. (a) Fire detecting, manual alarm, and supervised patrol systems are not required, but if installed, the systems shall meet the... 46 Shipping 7 2010-10-01 2010-10-01 false Fire detecting, manual alarm, and supervised patrol...

  9. 46 CFR 95.05-1 - Fire detecting, manual alarm, and supervised patrol systems.

    Science.gov (United States)

    2010-10-01

    ... Required § 95.05-1 Fire detecting, manual alarm, and supervised patrol systems. (a) Fire detecting, manual alarm, and supervised patrol systems are not required except in special cases; but if installed, the... 46 Shipping 4 2010-10-01 2010-10-01 false Fire detecting, manual alarm, and supervised patrol...

  10. Patrol car and agent tracking/suspect tagging and tracking

    Science.gov (United States)

    Wilkins, Steven C.

    1997-01-01

    Emerging technologies in the field of law enforcement are providing today's law enforcement personnel with the advantage of an innovative and faster means of providing safety and service to the public. The use of open such technology, the Automatic Vehicle Locator (AVL) tracking device, is fast becoming a commonplace and cost-effective solution for agencies to efficiently command and control their 'officer' assets. Through the use of AVL's global positioning satellite-based system, the response time of law enforcement is greatly enhanced by permitting a dispatcher to visually identify and assign the officer closest to the location of an accident or incident. The system is effective in reducing delays due to highway blockages, improving the level of protection to the motoring public, and promoting the flow of traffic on busy freeways. Likewise, an officer or agent in distress can be assured that a dispatcher will be constantly aware of his or her location in the field. In the 1990's the demands on law enforcement agencies have grown tremendously. this is due primarily to population increases, limited funding or resources, and increases in drug, property and violent crimes. Frequently, the automobile is used for escape after the commission of these crimes. This often results in high speed pursuits involving law enforcement agencies. In California, by statute, the California Highway Patrol is the central repository for data regarding all pursuits involving state and local law enforcement agencies. Statistics show that more than 10 percent of pursuits result in injuries to the violator and/or innocent bystanders. Most pursuits last less than 10 minutes, and the AVL system provides a tremendous advantage to law enforcement's ability to immediately deploy and direct units into pursuits for rapid closure of the incident. AVL systems not only reduce the risk of personal injury by minimizing public exposure to the unsafe incident, but also enhance officer safety during the

  11. FAST

    Science.gov (United States)

    Nathavitharana, R R; Daru, P; Barrera, A E; Mostofa Kamal, S M; Islam, S; Ul-Alam, M; Sultana, R; Rahman, M; Hossain, Md S; Lederer, P; Hurwitz, S; Chakraborty, K; Kak, N; Tierney, D B; Nardell, E

    2017-09-01

    National Institute of Diseases of the Chest and Hospital, Dhaka; Bangladesh Institute of Research and Rehabilitation in Diabetes, Endocrine and Metabolic Disorders, Dhaka; and Chittagong Chest Disease Hospital, Chittagong, Bangladesh. To present operational data and discuss the challenges of implementing FAST (Find cases Actively, Separate safely and Treat effectively) as a tuberculosis (TB) transmission control strategy. FAST was implemented sequentially at three hospitals. Using Xpert® MTB/RIF, 733/6028 (12.2%, 95%CI 11.4-13.0) patients were diagnosed with unsuspected TB. Patients with a history of TB who were admitted with other lung diseases had more than twice the odds of being diagnosed with unsuspected TB as those with no history of TB (OR 2.6, 95%CI 2.2-3.0, P stakeholder engagement and laboratory capacity are important for sustainability and scalability.

  12. Game Theory Models for Multi-Robot Patrolling of Infrastructures

    Directory of Open Access Journals (Sweden)

    Erik Hernández

    2013-03-01

    Full Text Available This work is focused on the problem of performing multi-robot patrolling for infrastructure security applications in order to protect a known environment at critical facilities. Thus, given a set of robots and a set of points of interest, the patrolling task consists of constantly visiting these points at irregular time intervals for security purposes. Current existing solutions for these types of applications are predictable and inflexible. Moreover, most of the previous work has tackled the patrolling problem with centralized and deterministic solutions and only few efforts have been made to integrate dynamic methods. Therefore, one of the main contributions of this work is the development of new dynamic and decentralized collaborative approaches in order to solve the aforementioned problem by implementing learning models from Game Theory. The model selected in this work that includes belief-based and reinforcement models as special cases is called Experience-Weighted Attraction. The problem has been defined using concepts of Graph Theory to represent the environment in order to work with such Game Theory techniques. Finally, the proposed methods have been evaluated experimentally by using a patrolling simulator. The results obtained have been compared with previous available approaches.

  13. 49 CFR 192.705 - Transmission lines: Patrolling.

    Science.gov (United States)

    2010-10-01

    ... adjacent to the transmission line right-of-way for indications of leaks, construction activity, and other factors affecting safety and operation. (b) The frequency of patrols is determined by the size of the line, the operating pressures, the class location, terrain, weather, and other relevant factors, but...

  14. A program for scheduling a Patrol Air Wing training plan.

    OpenAIRE

    Hutson, David V.

    1988-01-01

    Approved for public release; distribution in unlimited. This research examined the feasibility of a computerized scheduling system to assist the development of an annual training plan for a Patrol Air Wing. A prototype is proposed incorporating a modified A* search control structure to handle the combinatorial part of the problem. The system uses a pre-existing file for its database and is implemented on an ISI workstation using the Prolog computer language. Comparisons with...

  15. GATEWAY Demonstrations: Trial Demonstration of Area Lighting Retrofit, Yuma Border Patrol, Yuma, Arizona

    Energy Technology Data Exchange (ETDEWEB)

    Wilkerson, A. M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McCullough, J. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-12-31

    Along the Yuma Sector Border Patrol Area in Yuma, Arizona, the GATEWAY program conducted a trial demonstration in which the incumbent quartz metal halide area lighting was replaced with LED at three pole locations at the Yuma Sector Border Patrol Area in Yuma, Arizona. The retrofit was documented to better understand LED technology performance in high-temperature environments.

  16. A ship/boat is travelling parallel to a river bank and a patrol vehicle ...

    Indian Academy of Sciences (India)

    A ship/boat is travelling parallel to a river bank and a patrol vehicle is approaching the river along a road perpendicular to the river bank, i.e., the ship and the vehicle are moving at right angles to each other with uniform speeds. The patrol vehicle focuses a search light on the ship at all time instants, implying continuous ...

  17. Endothelial Protective Monocyte Patrolling in Large Arteries Intensified by Western Diet and Atherosclerosis.

    Science.gov (United States)

    Quintar, Amado; McArdle, Sara; Wolf, Dennis; Marki, Alex; Ehinger, Erik; Vassallo, Melanie; Miller, Jacqueline; Mikulski, Zbigniew; Ley, Klaus; Buscher, Konrad

    2017-05-26

    Nonclassical mouse monocyte (CX3CR1 high , Ly-6C low ) patrolling along the vessels of the microcirculation is critical for endothelial homeostasis and inflammation. Because of technical challenges, it is currently not established how patrolling occurs in large arteries. This study was undertaken to elucidate the molecular, migratory, and functional phenotypes of patrolling monocytes in the high shear and pulsatile environment of large arteries in healthy, hyperlipidemic, and atherosclerotic conditions. Applying a new method for stable, long-term 2-photon intravital microscopy of unrestrained large arteries in live CX3CR1-GFP (green fluorescent protein) mice, we show that nonclassical monocytes patrol inside healthy carotid arteries at a velocity of 36 μm/min, 3× faster than in microvessels. The tracks are less straight but lead preferentially downstream. The number of patrolling monocytes is increased 9-fold by feeding wild-type mice a Western diet or by applying topical TLR7/8 (Toll-like receptor) agonists. A similar increase is seen in CX3CR1 +/GFP /apoE -/- mice on chow diet, with a further 2- to 3-fold increase on Western diet (22-fold over healthy). In plaque conditions, monocytes are readily captured onto the endothelium from free flow. Stable patrolling is unaffected in CX3CR1-deficient mice and involves the contribution of LFA-1 (lymphocyte-associated antigen 1) and α 4 integrins. The endothelial damage in atherosclerotic carotid arteries was assessed by electron microscopy and correlates with the number of intraluminal patrollers. Abolishing patrolling monocytes in Nr4a1 -/- apoE -/- mice leads to pronounced endothelial apoptosis. Arterial patrolling is a prominent new feature of nonclassical monocytes with unique molecular and kinetic properties. It is highly upregulated in hyperlipidemia and atherosclerosis in a CX3CR1-independent fashion and plays a potential role in endothelial protection. © 2017 The Authors.

  18. Risk analysis of Safety Service Patrol (SSP) systems in Virginia.

    Science.gov (United States)

    Dickey, Brett D; Santos, Joost R

    2011-12-01

    The transportation infrastructure is a vital backbone of any regional economy as it supports workforce mobility, tourism, and a host of socioeconomic activities. In this article, we specifically examine the incident management function of the transportation infrastructure. In many metropolitan regions, incident management is handled primarily by safety service patrols (SSPs), which monitor and resolve roadway incidents. In Virginia, SSP allocation across highway networks is based typically on average vehicle speeds and incident volumes. This article implements a probabilistic network model that partitions "business as usual" traffic flow with extreme-event scenarios. Results of simulated network scenarios reveal that flexible SSP configurations can improve incident resolution times relative to predetermined SSP assignments. © 2011 Society for Risk Analysis.

  19. Development of a Data Reduction algorithm for Optical Wide Field Patrol

    Directory of Open Access Journals (Sweden)

    Sun-youp Park

    2013-09-01

    Full Text Available The detector subsystem of the Optical Wide-field Patrol (OWL network efficiently acquires the position and time information of moving objects such as artificial satellites through its chopper system, which consists of 4 blades in front of the CCD camera. Using this system, it is possible to get more position data with the same exposure time by changing the streaks of the moving objects into many pieces with the fast rotating blades during sidereal tracking. At the same time, the time data from the rotating chopper can be acquired by the time tagger connected to the photo diode. To analyze the orbits of the targets detected in the image data of such a system, a sequential procedure of determining the positions of separated streak lines was developed that involved calculating the World Coordinate System (WCS solution to transform the positions into equatorial coordinate systems, and finally combining the time log records from the time tagger with the transformed position data. We introduce this procedure and the preliminary results of the application of this procedure to the test observation images.

  20. Forensic science information needs of patrol officers: The perceptions of the patrol officers, their supervisors and administrators, detectives, and crime scene technicians

    Science.gov (United States)

    Aydogdu, Eyup

    Thanks to the rapid developments in science and technology in recent decades, especially in the past two decades, forensic sciences have been making invaluable contributions to criminal justice systems. With scientific evaluation of physical evidence, policing has become more effective in fighting crime and criminals. On the other hand, law enforcement personnel have made mistakes during the detection, protection, collection, and evaluation of physical evidence. Law enforcement personnel, especially patrol officers, have been criticized for ignoring or overlooking physical evidence at crime scenes. This study, conducted in a large American police department, was aimed to determine the perceptions of patrol officers, their supervisors and administrators, detectives, and crime scene technicians about the forensic science needs of patrol officers. The results showed no statistically significant difference among the perceptions of the said groups. More than half of the respondents perceived that 14 out of 16 areas of knowledge were important for patrol officers to have: crime scene documentation, evidence collection, interviewing techniques, firearm evidence, latent and fingerprint evidence, blood evidence, death investigation information, DNA evidence, document evidence, electronically recorded evidence, trace evidence, biological fluid evidence, arson and explosive evidence, and impression evidence. Less than half of the respondents perceived forensic entomology and plant evidence as important for patrol officers.

  1. The problem of zombie cops in voodoo criminology: arresting the police patrol 100 yard myth

    OpenAIRE

    Sutton, M; Hodgson, P

    2013-01-01

    The widely held criminological 'knowledge' that foot patrol beat policing is ineffective at either arresting offenders or reducing crime is substantially supported by research conducted by Clarke and Hough (1984), which makes the claim that: '...a patrolling policeman in London could expect to pass within 100 yards of a burglary in progress, roughly once every eight years but not necessarily catch the burglar or even realise that the crime was taking place.' This claim has been repeated, appa...

  2. Indoor Surveillance Security Robot with a Self-Propelled Patrolling Vehicle

    Directory of Open Access Journals (Sweden)

    Hou-Tsan Lee

    2011-01-01

    Full Text Available Self-propelled patrolling vehicles can patrol periodically in the designed area to ensure the safety like men do. The proposed vehicle cannot only save manpower, but also ensure the performance without mistakes caused by man. It is different from the traditional patrolling system which is limited by the manpower and the fixed camera positions. To improve such situation, this paper proposes a self-propelled patrolling vehicle which can move automatically to a wider range and record the monitored image by IPCAM within a predefined patrolling route. Besides, the user can use the mobile device or website to connect to the vehicle at anytime and anywhere and control it to move to the position to get the indoor image user wants. The position of self-propelled vehicles can be detected by the RFID reader as a feedback and be shown on the PC screen and smart phone. The recorded images can be also transmitted back to the server via WiFi system for face tracking and discriminating analysis. On the other hand, the self-propelled vehicle patrolling routes can be modified by the Android smart-phone remote-control module. When some defined events occur, the build-in MSN module will notice users by sending messages to PC and smart phone. Experimental results are given in the paper to validate its performance.

  3. Surface Effects in Magnetic Nanoparticles

    CERN Document Server

    Fiorani, Dino

    2005-01-01

    This volume is a collection of articles on different approaches to the investigation of surface effects on nanosized magnetic materials, with special emphasis on magnetic nanoparticles. The book aims to provide an overview of progress in the understanding of surface properties and surface driven effects in magnetic nanoparticles through recent results of different modeling, simulation, and experimental investigations.

  4. Seagull Syndrome: Relationships between Patrol Workers and Government Officials in NSW, Australia

    Directory of Open Access Journals (Sweden)

    Amanda Jayne Porter

    2017-03-01

    Full Text Available This paper explores the nature of relations between public officials and community workers, drawing on empirical data from a study on Indigenous patrols in New South Wales, Australia. Patrol workers interact with public officials from various state entities who are tasked with overseeing funding, carrying out evaluations and, to varying degrees, monitoring the ‘effectiveness’ of local patrol operations. These interactions illuminate several issues regarding the ways in which knowledge about patrols is created, contested and communicated between Indigenous and non-Indigenous domains. The emergent patterns of these relations can be described as ‘seagull syndrome’, which involves the privileging of some types of knowledge over others in decision-making regarding Indigenous affairs, often with disastrous consequences for Indigenous organisations and communities. The paper documents the core features of seagull syndrome with respect to the discrete practices, everyday decision-making and mundane communication between public officials and patrol workers in New South Wales. It considers the implications of seagull syndrome for policy-makers and academics working in the Indigenous justice space and suggests ways to resist or challenge this tendency

  5. CLUSTERING ANALYSIS OF OFFICER'S BEHAVIOURS IN LONDON POLICE FOOT PATROL ACTIVITIES

    Directory of Open Access Journals (Sweden)

    J. Shen

    2015-07-01

    Full Text Available In this small paper we aim at presenting a framework of conceptual representation and clustering analysis of police officers’ patrol pattern obtained from mining their raw movement trajectory data. This have been achieved by a model developed to accounts for the spatio-temporal dynamics human movements by incorporating both the behaviour features of the travellers and the semantic meaning of the environment they are moving in. Hence, the similarity metric of traveller behaviours is jointly defined according to the stay time allocation in each Spatio-temporal region of interests (ST-ROI to support clustering analysis of patrol behaviours. The proposed framework enables the analysis of behaviour and preferences on higher level based on raw moment trajectories. The model is firstly applied to police patrol data provided by the Metropolitan Police and will be tested by other type of dataset afterwards.

  6. The Border Patrol and Their Migra Corridos: Propaganda, Genre Adaptation, and Mexican Immigration

    Directory of Open Access Journals (Sweden)

    María Herrera-Sobek

    2012-05-01

    Full Text Available The U.S. Border Patrol efforts to stop illegal immigration from Mexico to the United States are manifold. In recent times, the U.S. Border Patrol has begun employing so-called corridos, or Mexican ballads, as a means of covert propaganda to slow down illegal immigration. In her article, María Herrera-Sobek discusses the appropriation of the corrido genre by the U.S. Border Control and analyzes the corridos from the point of view of extra-literary adaptations.

  7. Research on Line Patrol Strategy of 110kV Transmission Line after Lightning Strike

    Directory of Open Access Journals (Sweden)

    Li Mingjun

    2016-01-01

    Full Text Available Lightning faults occupy in the majority of instantaneous fault and reclosing can usually be successful, so power supply can be restored without immediate patrol in many cases. Firstly, this paper introduces the lightning fault positioning and identifying method. Then test electrical performance of insulators after lightning strike from 110kV lines. Data shows that lightning strike has little effect on the electric performance of insulator. Finally, illustrating disposal process of the 110 kV transmission line after lightning fault, certifying that the power supply reliability be ensured without line patrol.

  8. For a Greater Horn of Africa Sea Patrol

    DEFF Research Database (Denmark)

    Struwe, Lars Bangert

    Patrol. The capacity and resources devoted by the individual states, alliances and organisations to combating piracy could be used more efficiently by establishing a regional unit: a Greater Horn of Africa Sea Patrol (GHASP). GHASP could be built up on a regional basis founded on the states in and around...... for providing radar installations and aerial surveillance, training personnel and equipping maritime vessels. It would also be necessary to attach courts and punitive measures to GHASP. The establishment and operation of GHASP could be funded to advantage by the states that are presently providing capacity...

  9. Keeping Pace with Criminals: An Extended Study of Designing Patrol Allocation against Adaptive Opportunistic Criminals

    Directory of Open Access Journals (Sweden)

    Chao Zhang

    2016-06-01

    Full Text Available Game theoretic approaches have recently been used to model the deterrence effect of patrol officers’ assignments on opportunistic crimes in urban areas. One major challenge in this domain is modeling the behavior of opportunistic criminals. Compared to strategic attackers (such as terrorists who execute a well-laid out plan, opportunistic criminals are less strategic in planning attacks and more flexible in executing well-laid plans based on their knowledge of patrol officers’ assignments. In this paper, we aim to design an optimal police patrolling strategy against opportunistic criminals in urban areas. Our approach is comprised by two major parts: learning a model of the opportunistic criminal (and how he or she responds to patrols and then planning optimal patrols against this learned model. The planning part, by using information about how criminals responds to patrols, takes into account the strategic game interaction between the police and criminals. In more detail, first, we propose two categories of models for modeling opportunistic crimes. The first category of models learns the relationship between defender strategy and crime distribution as a Markov chain. The second category of models represents the interaction of criminals and patrol officers as a Dynamic Bayesian Network (DBN with the number of criminals as the unobserved hidden states. To this end, we: (i apply standard algorithms, such as Expectation Maximization (EM, to learn the parameters of the DBN; (ii modify the DBN representation that allows for a compact representation of the model, resulting in better learning accuracy and the increased speed of learning of the EM algorithm when used for the modified DBN. These modifications exploit the structure of the problem and use independence assumptions to factorize the large joint probability distributions. Next, we propose an iterative learning and planning mechanism that periodically updates the adversary model. We

  10. A design of toxic gas detecting security robot car based on wireless path-patrol

    Directory of Open Access Journals (Sweden)

    Cheng Ho-Chih

    2017-01-01

    Full Text Available Because a toxic gas detecting/monitoring system in a chemical plant is not movable, a gas detecting/monitoring system will be passive and the detecting range will also be constrained. This invention is an active multi-functional wireless patrol car that can substitute for humans that inspect a plant's security. In addition, to widen the monitoring vision within the environment, two motors used to rotate a wireless IPCAM with two axes are presented. Also, to control the robot car's movement, two axis motors used to drive the wheel of the robot car are also installed. Additionally, a toxic gas detector is linked to the microcontroller of the patrol car. The detected concentration of the gas will be fed back to the server pc. To enhance the robot car's patrolling duration, a movable electrical power unit in conjunction with a wireless module is also used. Consequently, this paper introduces a wireless path-patrol and toxic gas detecting security robot car that can assure a plant's security and protect workers when toxic gases are emitted.

  11. EXPOSURE TO PARTICULATE MATTER, VOLATILE ORGANIC COMPOUNDS, AND OTHER AIR POLLUTANTS INSIDE PATROL CARS

    Science.gov (United States)

    People driving in a vehicle might receive an enhanced dose of mobile source pollutants that are considered a potential risk for cardiovascular diseases. The exposure to components of air pollution in highway patrol vehicles, at an ambient, and a roadside location was determined d...

  12. Tracking Object Existence From an Autonomous Patrol Vehicle

    Science.gov (United States)

    Wolf, Michael; Scharenbroich, Lucas

    2011-01-01

    An autonomous vehicle patrols a large region, during which an algorithm receives measurements of detected potential objects within its sensor range. The goal of the algorithm is to track all objects in the region over time. This problem differs from traditional multi-target tracking scenarios because the region of interest is much larger than the sensor range and relies on the movement of the sensor through this region for coverage. The goal is to know whether anything has changed between visits to the same location. In particular, two kinds of alert conditions must be detected: (1) a previously detected object has disappeared and (2) a new object has appeared in a location already checked. For the time an object is within sensor range, the object can be assumed to remain stationary, changing position only between visits. The problem is difficult because the upstream object detection processing is likely to make many errors, resulting in heavy clutter (false positives) and missed detections (false negatives), and because only noisy, bearings-only measurements are available. This work has three main goals: (1) Associate incoming measurements with known objects or mark them as new objects or false positives, as appropriate. For this, a multiple hypothesis tracker was adapted to this scenario. (2) Localize the objects using multiple bearings-only measurements to provide estimates of global position (e.g., latitude and longitude). A nonlinear Kalman filter extension provides these 2D position estimates using the 1D measurements. (3) Calculate the probability that a suspected object truly exists (in the estimated position), and determine whether alert conditions have been triggered (for new objects or disappeared objects). The concept of a probability of existence was created, and a new Bayesian method for updating this probability at each time step was developed. A probabilistic multiple hypothesis approach is chosen because of its superiority in handling the

  13. Are ranger patrols effective in reducing poaching-related threats within protected areas?

    Science.gov (United States)

    Moore, Jennnifer F.; Mulindahabi, Felix; Masozera, Michel K.; Nichols, James; Hines, James; Turikunkiko, Ezechiel; Oli, Madan K.

    2018-01-01

    Poaching is one of the greatest threats to wildlife conservation world-wide. However, the spatial and temporal patterns of poaching activities within protected areas, and the effectiveness of ranger patrols and ranger posts in mitigating these threats, are relatively unknown.We used 10 years (2006–2015) of ranger-based monitoring data and dynamic multi-season occupancy models to quantify poaching-related threats, to examine factors influencing the spatio-temporal dynamics of these threats and to test the efficiency of management actions to combat poaching in Nyungwe National Park (NNP), Rwanda.The probability of occurrence of poaching-related threats was highest at lower elevations (1,801–2,200 m), especially in areas that were close to roads and tourist trails; conversely, occurrence probability was lowest at high elevation sites (2,601–3,000 m), and near the park boundary and ranger posts. The number of ranger patrols substantially increased the probability that poaching-related threats disappear at a site if threats were originally present (i.e. probability of extinction of threats). Without ranger visits, the annual probability of extinction of poaching-related threats was an estimated 7%; this probability would increase to 20% and 57% with 20 and 50 ranger visits per year, respectively.Our results suggest that poaching-related threats can be effectively reduced in NNP by adding ranger posts in areas where they do not currently exist, and by increasing the number of patrols to sites where the probability of poaching activities is high.Synthesis and applications. Our application of dynamic occupancy models to predict the probability of presence of poaching-related threats is novel, and explicitly considers imperfect detection of illegal activities. Based on the modelled relationships, we identify areas that are most vulnerable to poaching, and offer insights regarding how ranger patrols can be optimally deployed to reduce poaching-related threats and

  14. GATEWAY Demonstrations: LED System Performance in a Trial Installation--Two Years Later, Yuma Border Patrol, Yuma, Arizona

    Energy Technology Data Exchange (ETDEWEB)

    Wilkerson, Andrea M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sullivan, Gregory P. [Efficiency Solutions, Inc., Richland, WA (United States); Davis, Robert G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-04-01

    Along the Yuma Sector Border Patrol Area in Yuma, Arizona, the GATEWAY program conducted a trial demonstration in which the incumbent quartz metal halide area lighting was replaced with LED at three pole locations at the Yuma Sector Border Patrol Area in Yuma, Arizona. The retrofit was documented to better understand LED technology performance in high-temperature environments. This report follows the GATEWAY Yuma Phase 1.1 Report and reflects LED system results documented two years after the demonstration began.

  15. GATEWAY Demonstrations: LED System Performance in a Trial Installation--One Year Later, Yuma Border Patrol, Yuma, Arizona

    Energy Technology Data Exchange (ETDEWEB)

    Wilkerson, A. M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Davis, R. G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-04-01

    Along the Yuma Sector Border Patrol Area in Yuma, Arizona, the GATEWAY program conducted a trial demonstration in which the incumbent quartz metal halide area lighting was replaced with LED at three pole locations at the Yuma Sector Border Patrol Area in Yuma, Arizona. The retrofit was documented to better understand LED technology performance in high-temperature environments. This report follows the GATEWAY Yuma Phase 1.0 Report and reflects LED system results documented one year after the demonstration began.

  16. Trial Demonstration of Area Lighting Retrofit: Yuma Border Patrol, Yuma Arizona

    Energy Technology Data Exchange (ETDEWEB)

    Wilkerson, Andrea M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McCullough, Jeffrey J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-12-01

    The Yuma Sector Border Patrol Area is a high flux lighting application in a high temperature environment, presenting a formidable challenge for light-emitting diodes (LEDs). This retrofit is an Energy Savings Performance Contract ENABLE project under the U.S. Department of Energy (DOE) Federal Energy Management Program. If high flux LED technology performs well in a region with high ambient temperature and solar radiation, it can perform well in most outdoor environments. The design process for the Yuma retrofit has already provided valuable knowledge to CBP and DOE. The LED lighting system selected for the retrofit is expected to reduce energy consumption 69% compared to the incumbent quartz metal halide (QMH) lighting system. If the LED lighting system is installed, GATEWAY will continue to document and disseminate information regarding the installation and long-term performance so that others may also gain valuable knowledge from the Yuma Sector Border Patrol Area lighting retrofit.

  17. Changes in water quality along the course of a river - Classic monitoring versus patrol monitoring

    Science.gov (United States)

    Absalon, Damian; Kryszczuk, Paweł; Rutkiewicz, Paweł

    2017-11-01

    Monitoring of water quality is a tool necessary to assess the condition of waterbodies in order to properly formulate water management plans. The paper presents the results of patrol monitoring of a 40-kilometre stretch of the Oder between Racibórz and Koźle. It has been established that patrol monitoring is a good tool for verifying the distribution of points of classic stationary monitoring, particularly in areas subject to varied human impact, where tributaries of the main river are very diversified as regards hydrochemistry. For this reason the results of operational monitoring carried out once every few years may not be reliable and the presented condition of the monitored waterbodies may be far from reality.

  18. The acquisition radar’s detect annulus model of anti-submarine patrol aircraft

    Science.gov (United States)

    Wang, Jianguo; Yao, Keming; Wang, Xinwei; Men, Jinzhu

    2017-06-01

    Aiming at solving the problem of anti-submarine patrol aircraft(ASPA) detecting different sea-surface and aerial objects, based on the operation performance of acquisition radar, the paper puts forward the concept of detect annulus and establishes the corresponding model, and it gives the manner and method of ASPA detected objects. Through simulation and calculation, it discusses the different pattern of optical axis angle of depression and flight altitude from the width of detect annulus. The paper also provides the basis for the best optical axis angle of depression and flight altitude to meet the operational requirements. At last, the searching method of anti-submarine patrol aircraft using acquisition radar is put forward.

  19. A meta-analysis of corrosion studies for Maritime Patrol and Reconnaissance Aircraft (MPRA)

    OpenAIRE

    Wilson, Thomas E.

    2016-01-01

    Approved for public release; distribution is unlimited It is very important to find means and methods to reduce maritime patrol and reconnaissance aircraft (MPRA) corrosion costs. This thesis examines recent Department of Defense (DOD) and Government Accounting Office (GAO) corrosion studies to conduct meta-analysis and make recommendations based on correlated findings. The methods adopted for this thesis consist of a literature review, heuristic flow diagram, case study selections and met...

  20. Injury Prevention for Ski-Area Employees: A Physiological Assessment of Lift Operators, Instructors, and Patrollers

    OpenAIRE

    Roberts, Delia

    2013-01-01

    Background. Momentary lapses in concentration contribute to workplace accidents. Given that blood glucose (BG) and hydration levels have been shown to affect vigilance, this study proposed to investigate these parameters and functional movement patterns of ski-resort workers and to determine whether an educational program to stabilize BG and hydration and encourage joint stability had an effect in decreasing occupational injuries. Methods. Seventy-five instructors, patrollers and, lift-operat...

  1. Predictors of patrol officer interest in cybercrime training and investigation in selected United States police departments.

    Science.gov (United States)

    Holt, Thomas J; Bossler, Adam M

    2012-09-01

    Cybercrime has created substantial challenges for law enforcement, particularly at the local level. Most scholars and police administrators believe that patrol officers need to become more effective first responders to cybercrime calls. The evidence illustrates, however, that many patrol officers are neither adequately prepared nor strongly interested in taking an active role in addressing cybercrime at the local level. This study, therefore, examined the factors that predicted patrol officer interest in cybercrime training and investigations in two southeastern U.S. cities. The study specifically examined the relationship between demographics, cybercrime exposure, computer training, computer proficiency, Internet and cybercrime perceptions, and views on policing cybercrime with officer interest in cybercrime investigation training and conducting cybercrime investigations in the future. Officer views on policing cybercrime, particularly whether they valued cybercrime investigations and believed that cybercrime would dramatically change policing, along with their computer skills, were the strongest predictors of interest in cybercrime efforts. Officers who had received previous computer training were less interested in additional training and conducting investigations. These findings support the argument that more command and departmental meetings focusing on the value of investigating these types of crime need to be held in order to increase officer interest.

  2. Comparing the characteristics of snowboarders injured in a terrain park who present to the ski patrol, the emergency department or both.

    Science.gov (United States)

    Russell, Kelly; Meeuwisse, Willem; Nettel-Aguirre, Alberto; Emery, Carolyn A; Wishart, Jillian; Romanow, Nicole T R; Rowe, Brian H; Goulet, Claude; Hagel, Brent E

    2014-01-01

    Ski patrol report forms are a common data source in ski/snowboard research, but it is unclear if those who only present to the emergency department (ED) are systematically different from those who see the ski patrol. To determine the proportion and characteristics of injured snowboarders who bypass the ski patrol before presenting to the ED, three groups of injured snowboarders were compared: presented to the ED only, ski patrol only and ski patrol and ED. Data were collected from ski patrol Accident Report Forms (ARFs), ED medical records and telephone interviews. There were 333 injured snowboarders (ED only: 34, ski patrol only: 107, both: 192). Ability, time of day, snow conditions or drugs/alcohol predicted ED only presentation. Concussions (RRR: 4.66; 95% CI: 1.83, 11.90), sprains/strains (RRR: 4.22; 95% CI: 1.87, 9.49), head/neck (RRR: 2.90; 95% CI: 1.48, 5.78), trunk (RRR: 4.17; 95% CI: 1.92, 9.09) or lower extremity (RRR: 3.65; 95% CI: 1.32, 10.07) injuries were significantly more likely to present to ski patrol only versus ski patrol and ED. In conclusion, snowboarders who presented to the ED only had similar injuries as those who presented to both.

  3. Automated external defibrillator training and skill retention at a ski patrol.

    Science.gov (United States)

    Usatch, Ben R; Cone, David C

    2002-01-01

    To determine whether members of a ski patrol, most of whom have no off-season medical responsibilities, can successfully complete an automated external defibrillator (AED) training program prior to the ski season, and retain AED skills at the end of the season and at the beginning of the following season. A prospective educational study was conducted with 61 ski patrol personnel: 51 (84%) had no other medical training, 44 (72%) had no off-season medical duties, and 57 (93%) had no prior exposure to AEDs. Prior to the ski season (December 1, 1998), all members were trained and tested using the standard American Heart Association (AHA) AED training package and a Life-Pak 500 AED and AED Trainer donated by the Medtronic Physio-Control Corporation. Both after the ski season (April 1, 1999) and prior to the following season (October 30, 1999), with no refresher training, participants were retested with the same written and practical exams. Cochrane's linear trend test was used to compare scores on the practical and written tests over time. For the three testing sessions, practical test pass rates were 95%, 92%, and 97%, and written test pass rates were 100%, 98%, and 98%. There was no change in individuals' scores on either the written test (p = 0.914) or the practical test (p = 0.413) over time. A heterogeneous group of ski patrollers can successfully complete an AED training course, with good skill retention both after the ski season and at the beginning of the following season.

  4. Surface effects of underground nuclear explosions

    Energy Technology Data Exchange (ETDEWEB)

    Allen, B.M.; Drellack, S.L. Jr.; Townsend, M.J.

    1997-06-01

    The effects of nuclear explosions have been observed and studied since the first nuclear test (code named Trinity) on July 16, 1945. Since that first detonation, 1,053 nuclear tests have been conducted by the US, most of which were sited underground at the Nevada Test Site (NTS). The effects of underground nuclear explosions (UNEs) on their surroundings have long been the object of much interest and study, especially for containment, engineering, and treaty verification purposes. One aspect of these explosion-induced phenomena is the disruption or alteration of the near-surface environment, also known as surface effects. This report was prepared at the request of the Los Alamos National Laboratory (LANL), to bring together, correlate, and preserve information and techniques used in the recognition and documentation of surface effects of UNEs. This report has several main sections, including pertinent background information (Section 2.0), descriptions of the different types of surface effects (Section 3.0), discussion of their application and limitations (Section 4.0), an extensive bibliography and glossary (Section 6.0 and Appendix A), and procedures used to document geologic surface effects at the NTS (Appendix C). Because a majority of US surface-effects experience is from the NTS, an overview of pertinent NTS-specific information also is provided in Appendix B. It is not within the scope of this report to explore new relationships among test parameters, physiographic setting, and the types or degree of manifestation of surface effects, but rather to compile, summarize, and capture surface-effects observations and interpretations, as well as documentation procedures and the rationale behind them.

  5. The efficacy of vitamin D supplementation during a prolonged submarine patrol.

    Science.gov (United States)

    Gasier, Heath G; Gaffney-Stomberg, Erin; Young, Colin R; McAdams, Douglas C; Lutz, Laura J; McClung, James P

    2014-09-01

    Submariners spend prolonged periods submerged without sunlight exposure and may benefit from vitamin D supplementation to maintain vitamin D status. The primary objective of this study was to determine the efficacy of daily vitamin D supplementation on maintenance of 25-hydroxyvitamin D (25(OH)D) during a 3-month submarine patrol. Submariners were randomly divided into three groups: placebo (n = 16), 1,000 IU/day (n = 20), or 2,000 IU/day (n = 17). Anthropometrics, self-reported dietary calcium and vitamin D intake, serum markers of vitamin D and bone metabolism, and peripheral quantitative computed tomography (pQCT) parameters of the tibia were determined before and after the patrol. Prior to departure, 49 % of the subjects were vitamin D insufficient (<50 nmol/L). Following the patrol, 25(OH)D increased in all groups (p < 0.001): 3.3 ± 13.1 (placebo), 4.6 ± 11.3 (1,000 IU/day), and 13 ± 14 nmol/L (2,000 IU/day). The changes in 25(OH)D levels were dependent upon the baseline concentration of 25(OH)D and body mass (p < 0.001). Osteocalcin increased by 38 % (p < 0.01), and pQCT analyses revealed small, yet significant increases in indices of tibial structure and strength (p < 0.05) that were independent of supplementation. These data suggest that vitamin D status was low prior to the patrol, and the subsequent changes in vitamin D status were dependent on the baseline 25(OH)D levels and body mass. Furthermore, short-term skeletal health does not appear to be negatively affected by 3 months of submergence in spite of a suboptimal response to vitamin D supplementation.

  6. Moving Object Tracking and Its Application to an Indoor Dual-Robot Patrol

    Directory of Open Access Journals (Sweden)

    Cheng-Han Shih

    2016-11-01

    Full Text Available This paper presents an application of image tracking using an omnidirectional wheeled mobile robot (WMR. The objective of this study is to integrate image processing of hue, saturation, and lightness (HSL for fuzzy color space, and use mean shift tracking for object detection and a Radio Frequency Identification (RFID reader for confirming destination. Fuzzy control is applied to omnidirectional WMR for indoor patrol and intruder detection. Experimental results show that the proposed control scheme can make the WMRs perform indoor security service.

  7. More Eyes, (No Guns,) Less Crime: Estimating the Effects of Unarmed Private Patrols on Crime Using a Bayesian Structural Time-Series Model

    NARCIS (Netherlands)

    P.P. Liu (Paul); M. Fabbri (Marco)

    2016-01-01

    textabstractThis work studies the effect of unarmed private security patrols on crime. We make use of a initiative, triggered by an arguably exogenous events, consisting in hiring unarmed private security agents to patrol, observe and report to ordinary police criminal activities within a

  8. Intravascular Immune Surveillance by CXCR6+ NKT Cells Patrolling Liver Sinusoids

    Directory of Open Access Journals (Sweden)

    Geissmann Frederic

    2005-01-01

    Full Text Available We examined the in vivo behavior of liver natural killer T cells (NKT cells by intravital fluorescence microscopic imaging of mice in which a green fluorescent protein cDNA was used to replace the gene encoding the chemokine receptor CXCR6. NKT cells, which account for most CXCR6+ cells in liver, were found to crawl within hepatic sinusoids at 10-20 µm/min and to stop upon T cell antigen receptor activation. CXCR6-deficient mice exhibited a selective and severe reduction of CD1d-reactive NKT cells in the liver and decreased susceptibility to T-cell-dependent hepatitis. CXCL16, the cell surface ligand for CXCR6, is expressed on sinusoidal endothelial cells, and CXCR6 deficiency resulted in reduced survival, but not in altered speed or pattern of patrolling of NKT cells. Thus, NKT cells patrol liver sinusoids to provide intravascular immune surveillance, and CXCR6 contributes to liver-based immune responses by regulating their abundance.

  9. Surface effects on lyotropic liquid crystals

    OpenAIRE

    Oliveira, Elisabeth Andreoli de

    1998-01-01

    Liquid crystals are very sensitive to surface effects. In fact, these effects are very useful in designing eletro-optical devices. We present a review of the theoretical models that describe the surface interactions in liquid crystals, focusing on lyotropic systems. Experimental results will be presented and compared to theoretical predictions.

  10. An analysis of arthropod interceptions by APHIS-PPQ and Customs and Border Patrol in Puerto Rico

    Science.gov (United States)

    USDA Animal Plant Health Inspection Service Plant Protection and Quarantine (APHIS-PPQ) and Customs and Border Patrol (CBP) inspect traffic entering the United States for arthropods that pose a threat to national agriculture and/or ecosystems. We analyzed interceptions made by these agencies in Puer...

  11. Vibration of Piezoelectric Nanowires Including Surface Effects

    Directory of Open Access Journals (Sweden)

    R. Ansari

    2014-04-01

    Full Text Available In this paper, surface and piezoelectric effects on the vibration behavior of nanowires (NWs are investigated by using a Timoshenko beam model. The electric field equations and the governing equations of motion for the piezoelectric NWs are derived with the consideration of surface effects. By the exact solution of the governing equations, an expression for the natural frequencies of NWs with simply-supported boundary conditions is obtained. The effects of piezoelectricity and surface effects on the vibrational behavior of Timoshenko NWs are graphically illustrated. A comparison is also made between the predictions of Timoshenko beam model and those of its Euler-Bernoulli counterpart. Additionally, the present results are validated through comparison with the available data in the literature.

  12. Managing risk at the Tucson Sector of the U.S. Border Patrol.

    Science.gov (United States)

    Levine, E S; Waters, Julie F

    2013-07-01

    This article describes a risk analysis used to inform resource allocation at the Tucson Sector of the U.S. Border Patrol, the busiest sector for alien and drug trafficking along the Southwest land border with Mexico. The model and methodology that underlie this analysis are generally applicable to many resource allocation decisions regarding the management of frequently occurring hazards, decisions regularly made by officials at all levels of the homeland security enterprise. The analysis was executed by agents without previous risk expertise working under a short time frame, and the findings from the analysis were used to inform several resource allocation decisions. Published 2012. This article is a U.S. Government work and is in the public domain in the USA.

  13. LED system performance in a trial installation - one year later: Yuma border patrol, Yuma, Arizona

    Energy Technology Data Exchange (ETDEWEB)

    Wilkerson, Andrea M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Davis, Robert G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-04-01

    The Yuma Sector Border Patrol Area is a high temperature and high solar radiation environment, providing an opportunity for the U.S. Department of Energy (DOE) to study thermal effects on outdoor light-emitting diode (LED) luminaires outside of the testing laboratory. Six LED luminaires were installed on three poles on the U.S.- Mexico border in February 2014 as part of a trial installation, which was detailed in a prior GATEWAY report.1 The initial trial installation was intended as a short - term test of six luminaires installed on three poles before proceeding with the complete installation of over 400 luminaires. Unexpected delays in the full installation have prevented the detailed evaluations initially planned, but the six installed LED luminaires continue to be monitored, and over the past year illuminance measurements were recorded initially in February 2014 and again in September 2014 at about 2500 hours of operation and in March 2015 at about 5000 hours of operation.

  14. IMPROVEMENT OF BUSINESS EFFICIENCY USING A MULTI-AGENT SIMULATION FOR HIGHWAY PATROL ON URBAN EXPRESSWAY

    Science.gov (United States)

    Okamoto, Taro; Taniguchi, Eiichi; Yamada, Tadashi

    In Japan, the network of urban expressway has been expanding with the development of urban areas. However, the patrol systems in the urban expressway has not been operated on the basis of scientific evidence, but of conformity and experience. It is therefore crucial to efficiently operate such systems, not only to facilitate the rapid recovery of decreased expressway functionality, but also to acquire the income that supports the operation of privatized expressway companies. Therefore, we develop a multiagent simulation model consisting of the decision-making of four agents, including expressway company, highway patol company, road network users and road authority. These agents determines their schemes depending on their profit obtained. Results of the simulation identyfies the schemes that could offer the profits to the expressway companies in terms of the convenience of the users and the improvement of their operation.

  15. The Development of the Control System for the Automated Patrol Telescope.

    Science.gov (United States)

    Payne, Paul Wilfrid

    A Baker-Nunn Satellite Tracking Camera has been modified to undertake contemporary astronomical survey and patrol projects. The f/1 camera now has a CCD at the focus with a field of 1.2 by 0.9 degrees, with a pixel resolution of 9 arc seconds. The mount has been reconfigured into an equatorial, with new bearings and a friction drive on the right ascension axis. The camera is now called the Automated Patrol Telescope (A.P.T.). This thesis describes the servo control system which was developed to control the motion of the telescope. A digital servo control system was developed incorporating three 6502 microprocessors. Two digital controllers were constructed which interface to a host Apple IIe. Each controller drives a D.C. printed armature motor which is coupled to the axes of the telescope mount through reduction gears. The position and velocity of the telescope are sensed through an incremental encoder on the shaft of each motor. The thesis describes the development of the control algorithm and its performance. Nonlinear friction within the drive mechanism led to the implementation of a velocity PID control algorithm with gain scheduling. The control system is responsible for pointing, tracking and autoguiding the telescope. Each utility can be initiated through the Apple IIe keyboard or remotely via a GPIB link. The results of an initial pointing test are presented. The pointing algorithm compensates for the effects introduced by the nonperpendicularities between the axes of the mount, polar misalignment, and atmospheric refraction. Modelling of the telescope and mount improved the pointing accuracy from 746 to 168 arc second. The thesis discusses possible causes as to why further improvement was not achieved. The tracking and autoguiding responses of the telescope are presented. The tracking accuracy during autoguiding is 0.22 arc seconds. A systematic error of 0.56 arc seconds is also present. The source of this systematic error is explained and a solution is

  16. Surface effects on converse piezoelectricity of crystals.

    Science.gov (United States)

    Molayem, Mohammad; Springborg, Michael; Kirtman, Bernard

    2017-09-20

    The contribution of surface units to bulk properties are often neglected in theoretical and computational studies of crystalline systems. We demonstrate that this assumption has to be made with caution in the case of (electric field) polarization. As a generalization of an earlier work on quasi-one-dimensional systems [Springborg, et al., Phys. Rev. B: Condens. Matter Mater. Phys., 2010, 82, 165442], it is shown that the polarization for 2D and 3D systems contains a surface contribution that can, in principle, take any value (within physical limits) and has consequences for converse piezoelectric responses. Subsequently, we determine the surface effects quantitatively for a group of ferroelectric perovskite structures. Our results indicate that such contributions can be substantial.

  17. Research in Advanced Surface Effect Ships

    Science.gov (United States)

    2008-02-12

    115% Power -49.34 kts Aver Service -P$.(100oer-6830 vr evc ’N Speed) -nPoly. (815% Power - 43 kts Aver Service -7---Speed) -Poly. (10% Power - 4.8...Fast Ferry $0.30 PoIy. (130% Power - 63.3 kts Aver Service $0.20Sed -Poly. (115% Power-60.3 kts Aver Service -pee.(00d oer-68)t vr evc Poly. (850% Power

  18. Portable Gas Analyzer Based on Fourier Transform Infrared Spectrometer for Patrolling and Examining Gas Exhaust

    Directory of Open Access Journals (Sweden)

    Yuntao Liang

    2015-01-01

    Full Text Available Aimed at monitoring emission of organic gases such as CH4, C2H6, C3H8, iso-C4H10, n-C4H10, C2H4, C3H6, C2H2, CO, and CO2, from coal mines, petroleum refineries, and other plants, a Fourier Transform Infrared (FT-IR spectrometer was used to develop a portable gas analyzer for patrolling and examining gas exhaust. Firstly, structure of the instrument was introduced. Then, a spectral analysis approach was presented. Finally, instrument was tested with standard gases and with actual gases emitted from a petroleum refinery. For the latter test, a gas chromatograph (GC was used as a reference instrument. The test results showed that the detection limit of every component of analyte was less than 10 × 10−6. The maximum test error of every analyte was less than 15 × 10−6 when its practical concentration was no more than 500 × 10−6. A final comparison showed that the result curves of analytes obtained with FT-IR spectrometer almost overlapped with those obtained with GC, and their resulting noise was less than 6.4% when the practical gas concentration was above 100 × 10−6. As a result, our instrument was suitable to be used as a portable instrument for monitoring exhaust gases.

  19. Comparison between anti-reflection-coated and uncoated spectacle lenses for presbyopic highway patrol troopers.

    Science.gov (United States)

    Bachman, W G; Weaver, J L

    1999-02-01

    The use of anti-reflection coatings (AR) for spectacle lenses is steadily increasing. These ultra-thin coatings reduce reflections in lenses, increasing light transmittance about 8% (from 91% to 99%). Patient reports of crisper detail and brighter environment indicate that this perceived increase in visual function would probably be of benefit to many, including highway patrolmen who must make daily judgments on the basis of fine visual detail. Nineteen presbyopic Missouri State Highway Patrolmen (MSHP) participated in this crossover study. Subjects randomly wore Varilux Comfort progressive addition lenses in CR-39 that were uncoated or AR-coated. The AR coating was Crizal. Subjects wore each lens for 1 month, then compared the lenses directly for 1 week. Data were collected for lens scoring (both general and job specific) and lens preferences. The AR-coated lens was found to be significantly better in most categories. Reduction in glare and reflections during the day, night, indoors, and in the patrol vehicle--as well as improvement in overall night vision--were highly significant. Eighty-nine percent of the subjects chose the Crizal-coated lenses as their overall preferred lens. The results of this study appear to demonstrate a noticeable subjective preference for AR-coated lenses when used by a group engaged in a visually demanding occupation.

  20. Injury prevention for ski-area employees: a physiological assessment of lift operators, instructors, and patrollers.

    Science.gov (United States)

    Roberts, Delia

    2013-01-01

    Momentary lapses in concentration contribute to workplace accidents. Given that blood glucose (BG) and hydration levels have been shown to affect vigilance, this study proposed to investigate these parameters and functional movement patterns of ski-resort workers and to determine whether an educational program to stabilize BG and hydration and encourage joint stability had an effect in decreasing occupational injuries. Seventy-five instructors, patrollers and, lift-operators at five snowsport resorts were evaluated for BG, vigilance, workload, dietary/hydration practices, and functional-movement patterns. Injury rates were tabulated before and after an educational program for nutrition and functional-movement awareness and compared to other resorts. Workers showed poor stability at the lumbar spine, knee, and shoulder. BG levels were normal but variable (%CV = 14 ± 6). Diets were high in sugar and fat and low in water and many nutrients. Medical Aid and Lost Time claims declined significantly by 65.1 ± 20.0% (confidence interval -90.0% ≤ μ ≤ -40.2%) in resorts that used the educational program whereas four control resorts not using the program experienced increases of 33.4 ± 42.9% (confidence interval -19.7% ≤ μ ≤ -86.7%; F[2,12] = 21.35, P educational programs encouraging hydration, diet to stabilize BG, and functional-movement awareness was effective in reducing worksite injuries in this population.

  1. On the Stress Transfer of Nanoscale Interlayer with Surface Effects

    Directory of Open Access Journals (Sweden)

    Quan Yuan

    2018-01-01

    Full Text Available An improved shear-lag model is proposed to investigate the mechanism through which the surface effect influences the stress transfer of multilayered structures. The surface effect of the interlayer is characterized in terms of interfacial stress and surface elasticity by using Gurtin–Murdoch elasticity theory. Our calculation result shows that the surface effect influences the efficiency of stress transfer. The surface effect is enhanced with decreasing interlayer thickness and elastic modulus. Nonuniform and large residual surface stress distribution amplifies the influence of the surface effect on stress concentration.

  2. Autonomous mobile platform with simultaneous localisation and mapping system for patrolling purposes

    Science.gov (United States)

    Mitka, Łukasz; Buratowski, Tomasz

    2017-10-01

    This work describes an autonomous mobile platform for supervision and surveillance purposes. The system can be adapted for mounting on different types of vehicles. The platform is based on a SLAM navigation system which performs a localization task. Sensor fusion including laser scanners, inertial measurement unit (IMU), odometry and GPS lets the system determine its position in a certain and precise way. The platform is able to create a 3D model of a supervised area and export it as a point cloud. The system can operate both inside and outside as the navigation algorithm is resistant to typical localization errors caused by wheel slippage or temporal GPS signal loss. The system is equipped with a path-planning module which allows operating in two modes. The first mode is for periodical observation of points in a selected area. The second mode is turned on in case of an alarm. When it is called, the platform moves with the fastest route to the place of the alert. The path planning is always performed online with use of the most current scans, therefore the platform is able to adjust its trajectory to the environment changes or obstacles that are in the motion. The control algorithms are developed under the Robot Operating System (ROS) since it comes with drivers for many devices used in robotics. Such a solution allows for extending the system with any type of sensor in order to incorporate its data into a created area model. Proposed appliance can be ported to other existing robotic platforms or used to develop a new platform dedicated to a specific kind of surveillance. The platform use cases are to patrol an area, such as airport or metro station, in search for dangerous substances or suspicious objects and in case of detection instantly inform security forces. Second use case is a tele-operation in hazardous area for an inspection purposes.

  3. Injury Prevention for Ski-Area Employees: A Physiological Assessment of Lift Operators, Instructors, and Patrollers

    Directory of Open Access Journals (Sweden)

    Delia Roberts

    2013-01-01

    Full Text Available Background. Momentary lapses in concentration contribute to workplace accidents. Given that blood glucose (BG and hydration levels have been shown to affect vigilance, this study proposed to investigate these parameters and functional movement patterns of ski-resort workers and to determine whether an educational program to stabilize BG and hydration and encourage joint stability had an effect in decreasing occupational injuries. Methods. Seventy-five instructors, patrollers and, lift-operators at five snowsport resorts were evaluated for BG, vigilance, workload, dietary/hydration practices, and functional-movement patterns. Injury rates were tabulated before and after an educational program for nutrition and functional-movement awareness and compared to other resorts. Results. Workers showed poor stability at the lumbar spine, knee, and shoulder. BG levels were normal but variable (%CV = 14±6. Diets were high in sugar and fat and low in water and many nutrients. Medical Aid and Lost Time claims declined significantly by 65.1±20.0% (confidence interval −90.0% ≤μ≤−40.2% in resorts that used the educational program whereas four control resorts not using the program experienced increases of 33.4±42.9% (confidence interval −19.7% ≤μ≤−86.7%; F[2,12] = 21.35, P<0.0001 over the same season. Conclusion. Provision of snowsport resort workers with educational programs encouraging hydration, diet to stabilize BG, and functional-movement awareness was effective in reducing worksite injuries in this population.

  4. Allometric Scaling of Patrolling Rate and Nest Volume in Constrictotermes cyphergaster Termites: Hints on the Settlement of Inquilines.

    Directory of Open Access Journals (Sweden)

    Og DeSouza

    Full Text Available Structural and functional traits of organisms are known to be related to the size of individuals and to the size of their colonies when they belong to one. Among such traits, propensity to inquilinism in termites is known to relate positively to colony size. Larger termitaria hold larger diversity of facultative inquilines than smaller nests, whereas obligate inquilines seem unable to settle in nests smaller than a threshold volume. Respective underlying mechanisms, however, remain hypothetical. Here we test one of such hypotheses, namely, that nest defence correlates negatively to nest volume in Constrictotermes cyphergaster termites (Termitidae: Nasutitermitinae. As a surrogate to defence, we used 'patrolling rate', i.e., the number of termite individuals attending per unit time an experimentally damaged spot on the outer wall of their termitaria. We found that patrolling rate decayed allometrically with increasing nest size. Conspicuously higher patrolling rates occurred in smaller nests, while conspicuously lower rates occurred in larger nests presenting volumes in the vicinity of the threshold value for the establishment of inquilinism. This could be proven adaptive for the host and guest. At younger nest age, host colonies are smaller and presumably more vulnerable and unstable. Enhanced defence rates may, hence, prevent eventual risks to hosts from inquilinism at the same time that it prevents inquilines to settle in a still unstable nest. Conversely, when colonies grow and maturate enough to stand threats, they would invest in priorities other than active defence, opening an opportunity for inquilines to settle in nests which are more suitable or less risky. Under this two-fold process, cohabitation between host and inquiline could readily stabilize.

  5. Allometric Scaling of Patrolling Rate and Nest Volume in Constrictotermes cyphergaster Termites: Hints on the Settlement of Inquilines

    Science.gov (United States)

    DeSouza, Og; Araújo, Ana Paula Albano; Florencio, Daniela Faria; Rosa, Cassiano Sousa; Marins, Alessandra; Costa, Diogo Andrade; Rodrigues, Vinicius Barros; Cristaldo, Paulo Fellipe

    2016-01-01

    Structural and functional traits of organisms are known to be related to the size of individuals and to the size of their colonies when they belong to one. Among such traits, propensity to inquilinism in termites is known to relate positively to colony size. Larger termitaria hold larger diversity of facultative inquilines than smaller nests, whereas obligate inquilines seem unable to settle in nests smaller than a threshold volume. Respective underlying mechanisms, however, remain hypothetical. Here we test one of such hypotheses, namely, that nest defence correlates negatively to nest volume in Constrictotermes cyphergaster termites (Termitidae: Nasutitermitinae). As a surrogate to defence, we used ‘patrolling rate’, i.e., the number of termite individuals attending per unit time an experimentally damaged spot on the outer wall of their termitaria. We found that patrolling rate decayed allometrically with increasing nest size. Conspicuously higher patrolling rates occurred in smaller nests, while conspicuously lower rates occurred in larger nests presenting volumes in the vicinity of the threshold value for the establishment of inquilinism. This could be proven adaptive for the host and guest. At younger nest age, host colonies are smaller and presumably more vulnerable and unstable. Enhanced defence rates may, hence, prevent eventual risks to hosts from inquilinism at the same time that it prevents inquilines to settle in a still unstable nest. Conversely, when colonies grow and maturate enough to stand threats, they would invest in priorities other than active defence, opening an opportunity for inquilines to settle in nests which are more suitable or less risky. Under this two-fold process, cohabitation between host and inquiline could readily stabilize. PMID:26808197

  6. [Risk for environment-induced diseases due to air pollution from motor vehicles in road-patrol officers].

    Science.gov (United States)

    Mikhaĭlichenko, K Iu; Kas'ianenko, A A; Shchelkunova, I G; Grechko, A V

    2010-01-01

    The paper describes risk factors for environment-induced diseases in road-patrol (RP) officers under the existing working conditions: noise and chemical ambient air pollution from motor vehicles. There is evidence for a significant increase in the incidence of diseases of the cardiovascular and nervous system, sense organs, digestive and endocrine metabolic systems in the State Road Safety Inspectorate officers who are directly engaged in traffic management. Potential and real risks from motor transport to the health of RP roads have been estimated. Recommendations on optimizing the working conditions are given.

  7. Yuma Border Patrol Area Lighting Retrofit LED System Performance in a Trial Installation – Two Years Later

    Energy Technology Data Exchange (ETDEWEB)

    Wilkerson, Andrea M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sullivan, Gregory P. [Efficiency Solutions, Inc, Richland, WA (United States); Davis, Robert G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-05-21

    Documentation of the Yuma Sector Border Patrol Area lighting LED trial demonstration continues to provide a better understanding of LED technology performance in a high ambient temperature and high solar radiation environment. Measured data at the project site showed illuminances changing more rapidly than anticipated. As previously predicted, the causes for these observed changes are mostly if not completely explained by dirt accumulation. The laboratory measurements showed not only the effect of dirt on lumen output, but also on the distribution of light exiting the luminaire.

  8. Evaluation of the influence of mobile data terminal location on physical exposures during simulated police patrol activities.

    Science.gov (United States)

    McKinnon, C D; Callaghan, J P; Dickerson, C R

    2012-09-01

    Prolonged occupational police driving combined with use of an in-vehicle computer elicits awkward, sustained postures in a scenario that lacks the adjustability to accommodate many mobile officer anthropometries and job-specific components. Twenty participants performed simulated police patrol sessions at five mobile data terminal (MDT) locations and using two seats: standard police vehicle seat and modified seat designed for police use. An MDT location self-selected prior to the session reduced perceived discomfort by up to 50% in the low back (p Ergonomics Society. All rights reserved.

  9. Finite element simulations of surface effect on Rayleigh waves

    Science.gov (United States)

    He, Jin; Zhao, Jinling

    2018-03-01

    Rayleigh waves influenced by surface effect are investigated by using finite element methods, in which eigenfrequency analysis are performed on a model composed of a half-space covered by the surface effect dominated domain. For a given wavelength, the frequency of the Rayleigh wave is obtained as the eigenfrequency of the model satisfying Floquet periodic boundary conditions. The thickness of the surface effect can be set to be infinitely small or a finite value in the finite element methods. The curvature-dependent out-of-plane force induced by surface tension as described by the generalized Young-Laplace equation is realized through geometric nonlinear analysis. The finite element simulations show that the assumptions of small curvature and infinitely small thickness of the surface effect widely used in theoretical approaches become invalid when Rayleigh waves are highly influenced by the surface effect. This work gives a more accurate insight into the surface effect on Rayleigh waves and provides a potential method for measuring the thickness of the surface effect from the dispersion curves of surface effect influenced Rayleigh wave velocities.

  10. Surface effects in metal oxide-based nanodevices

    KAUST Repository

    Lien, Der Hsien

    2015-10-29

    As devices shrink to the nanoscale, surface-to-volume ratio increases and the surface-environment interaction becomes a major factor for affecting device performance. The variation of electronic properties, including the surface band bending, gas chemisorption or photodesorption, native surface defects, and surface roughness, is called "surface effects". Such effects are ambiguous because they can be either negative or beneficial effects, depending on the environmental conditions and device application. This review provides an introduction to the surface effects on different types of nanodevices, offering the solutions to respond to their benefits and negative effects and provides an outlook on further applications regarding the surface effect. This review is beneficial for designing nano-enabled photodetectors, harsh electronics, memories, sensors and transistors via surface engineering.

  11. Study the Postbuckling of Hexagonal Piezoelectric Nanowires with Surface Effect

    Directory of Open Access Journals (Sweden)

    O. Rahmani

    2014-04-01

    Full Text Available Piezoelectric nanobeams having circular, rectangular and hexagonal cross-sections are synthesized and used in various Nano structures; however, piezoelectric nanobeams with hexagonal cross-sections have not been studied in detail. In particular, the physical mechanisms of the surface effect and the role of surface stress, surface elasticity and surface piezoelectricity have not been discussed thoroughly. The present study investigated post-buckling behavior of piezoelectric nanobeams by examining surface effects. The energy method was applied to post-buckling of hexagonal nanobeams and the critical buckling voltage and amplitude are derived analytically from bulk and surface material properties and geometric factors.

  12. Surface effects in the acetylation of granular potato starch

    NARCIS (Netherlands)

    Steeneken, P.A.M.; Woortman, A.J.J.

    2008-01-01

    The occurrence of surface effects in the acetylation of granular potato starch with acetic anhydride to degrees of substitution 0.04-0.2 was studied by two different approaches. The first approach involved the fractionation of granular starch acetates into five different size classes and analysis of

  13. Progress in the development of the surface effect catamaran (SECAT)

    Science.gov (United States)

    Durkin, J. M.; Paraskevas, N. M.

    1986-09-01

    Twin-cushion surface effect ship technology development includes analytical and experimental investigations in the areas of hydrodynamics, seakeeping, and structures. This paper reviews the progress achieved in hydrodynamic drag prediction and correlation, and craft motions, and identification of passive motion reducing devices. A 33-foot demonstrator has been constructed to further extend the technology data base.

  14. Surface effects on the propagation of sound in Fermi liquids

    International Nuclear Information System (INIS)

    Nagai, K.; Woelfle, P.

    1981-01-01

    The propagation of sound in a resonator is discussed in both the normal and superfluid Fermi liquids. A set of model hydrodynamic equations is developed for describing the transition from the hydrodynamic regime to the collisionless regime. Surface effects are incorporated by using a slip boundary condition. The resonance condition for the sound propagation in a cylindrical resonator is derived

  15. FAST scan

    DEFF Research Database (Denmark)

    Müller, Anna

    FAST-skanning er en metode, der har til formål at hurtigt diagnosticere fri væske i bughulen hos traumapatienter og andre akutte patienter. Denne skanningsteknik blev først introduceret til hunde i 2004, og omfatter ultralydsskanning af specifikke punkter i bughulen, hvor der er stor chance....../sorte) områder. I dag bruges FAST-skanning meget hyppigt indenfor human og veterinær akutmedicin. Det kan ses som et værktøj for dyrlæger som ikke arbejder med ultralyd til daglig. FAST-skanning har mange fordele; proceduren er effektiv og kan tage under 3 minutter, men har alligevel høj diagnostisk værdi. Det...... nødvendigt. Det skal dog understreges, at de abdominale organer ikke undersøges specifikt. Det kan være svært at skelne mellem væske i peritonealhulen og i det retroperitoneale rum. Man kan heller ikke karakterisere væsken og derved skelne mellem f.eks. blod, pus eller urin. Siden FAST-skanning blev...

  16. Fast ejendom

    DEFF Research Database (Denmark)

    Pagh, Peter

    Bogen omfatter en gennemgang af lovgivning, praksis og teori vedrørende køb af fast ejendom og offentligretlig og privatretlig regulering. Bogen belyser bl.a. de privatretlige emner: købers misligholdelsesbeføjelser, servitutter, naboret, hævd og erstatningsansvar for miljøskader samt den...

  17. Development of a Data Reduction Algorithm for Optical Wide Field Patrol (OWL) II: Improving Measurement of Lengths of Detected Streaks

    Science.gov (United States)

    Park, Sun-Youp; Choi, Jin; Roh, Dong-Goo; Park, Maru; Jo, Jung Hyun; Yim, Hong-Suh; Park, Young-Sik; Bae, Young-Ho; Park, Jang-Hyun; Moon, Hong-Kyu; Choi, Young-Jun; Cho, Sungki; Choi, Eun-Jung

    2016-09-01

    As described in the previous paper (Park et al. 2013), the detector subsystem of optical wide-field patrol (OWL) provides many observational data points of a single artificial satellite or space debris in the form of small streaks, using a chopper system and a time tagger. The position and the corresponding time data are matched assuming that the length of a streak on the CCD frame is proportional to the time duration of the exposure during which the chopper blades do not obscure the CCD window. In the previous study, however, the length was measured using the diagonal of the rectangle of the image area containing the streak; the results were quite ambiguous and inaccurate, allowing possible matching error of positions and time data. Furthermore, because only one (position, time) data point is created from one streak, the efficiency of the observation decreases. To define the length of a streak correctly, it is important to locate the endpoints of a streak. In this paper, a method using a differential convolution mask pattern is tested. This method can be used to obtain the positions where the pixel values are changed sharply. These endpoints can be regarded as directly detected positional data, and the number of data points is doubled by this result.

  18. Physical Fitness Characteristics of High vs. Low Performers on an Occupationally Specific Physical Agility Test for Patrol Officers.

    Science.gov (United States)

    Dawes, J Jay; Lindsay, Keston; Bero, Jennifer; Elder, Craig; Kornhauser, Charlie; Holmes, Ryan

    2017-10-01

    Law enforcement agencies frequently use physical ability tests (PATs) as a method of evaluating occupational performance. These tests are designed to replicate essential occupational tasks frequently performed by officers in the field. The purpose of this study was to determine whether significant relationships exist between the selected physical fitness tests and PAT performance and to determine which of these tests best differentiates between high and low PAT performers. Full-time highway patrol officers (n = 495) submitted self-reported anthropometric data (mean age = 39.6 + 7.7 years) along with fitness assessments taken from their organization's yearly fitness tests. All subjects completed a series of field-based fitness tests, as well as an occupationally specific PAT. Results of the study indicated that the selected tests accounted for almost 69% of the total variance on PAT performance. Overall, the 20-m meter multistage fitness test, 1-minute sit-up performance, and vertical jump height best predicted PAT performance. Furthermore, it was revealed that high performers were significantly more fit in all measures of dynamic fitness when compared with lower performers. No significant differences were discovered in static strength between groups. Strength and conditioning specialists should focus on developing aerobic capacity, trunk muscular endurance, and whole-body anaerobic power to improve PAT and occupational performance.

  19. Towards ultra-stiff materials: Surface effects on nanoporous materials

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Dingjie; Xie, Yi Min; Huang, Xiaodong; Zhou, Shiwei, E-mail: shiwei.zhou@rmit.edu.au [Centre for Innovative Structures and Materials, School of Civil, Environmental and Chemical Engineering, RMIT University, GPO Box 2476, Melbourne 3001 (Australia); Li, Qing [School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, New South Wales 2006 (Australia)

    2014-09-08

    The significant rise in the strength and stiffness of porous materials at nanoscale cannot be described by conventional scaling laws. This letter investigates the effective Young's modulus of such materials by taking into account surface effect in a microcellular architecture designed for an ultralight material whose stiffness is an order of magnitude higher than most porous materials. We find that by considering the surface effects the predicted stiffness using Euler-Bernoulli beam theory compares well to experimental data for spongelike nanoporous gold with random microstructures. Analytical results show that, of the two factors influencing the effective Young's modulus, the residual stress is more important than the surface stiffness.

  20. Nonlinear free vibration of piezoelectric nanobeams incorporating surface effects

    International Nuclear Information System (INIS)

    Hosseini-Hashemi, Shahrokh; Nahas, Iman; Fakher, Mahmood; Nazemnezhad, Reza

    2014-01-01

    In this study, the nonlinear free vibration of piezoelectric nanobeams incorporating surface effects (surface elasticity, surface tension, and surface density) is studied. The governing equation of the piezoelectric nanobeam is derived within the framework of Euler–Bernoulli beam theory with the von Kármán geometric nonlinearity. In order to satisfy the balance conditions between the nanobeam bulk and its surfaces, the component of the bulk stress, σ zz , is assumed to vary linearly through the nanobeam thickness. An exact solution is obtained for the natural frequencies of a simply supported piezoelectric nanobeam in terms of the Jacobi elliptic functions using the free vibration mode shape of the corresponding linear problem. Then, the influences of the surface effects and the piezoelectric field on the nonlinear free vibration of nanobeams made of aluminum and silicon with positive and negative surface elasticity, respectively, have been studied for various properties of the piezoelectric field, various nanobeam sizes and amplitude ratios. It is observed that if the Young’s modulus of a nanobeam is lower, the effect of the piezoelectric field on the frequency ratios (FRs) of the nanobeam will be greater. In addition, it is seen that by increasing the nanobeam length so that the nanobeam cross section is set to be constant, the surface effects and the piezoelectric field with negative voltage values increases the FRs, whereas it is the other way around when the nanobeam cross section is assumed to be dependent on the length of the nanobeam. (paper)

  1. Prehospital medical care and the National Ski Patrol: how does outdoor emergency care compare to traditional EMS training?

    Science.gov (United States)

    Constance, Benjamin B; Auerbach, Paul S; Johe, David H

    2012-06-01

    The purpose of this study was to identify the differences between the educational curricula, skill sets, and funds of knowledge required for certification as an Outdoor Emergency Care Technician (OEC-T), Emergency Medical Technician (EMT), and Emergency Medical Responder (EMR). We directly and in detail compared topics and skills presented in the OEC-T curriculum with those presented in the EMT and EMR education and training curricula. The information and skills taught in the OEC-T curriculum are in general more extensive than those taught in EMR training but are not equivalent to EMT. The OEC-T program has more depth in environmental medical issues, such as altitude illness, hyperthermia and hypothermia. Completion of the EMR program is 112 hours shorter and constitutes 30% of the duration of the EMT program. Completion of the OEC-T program (for certification only and not including additional "on-hill" patroller training) is 80 hours shorter and is half the duration of the EMT program. The OEC-T curriculum includes a skill set and fund of knowledge that exceeds those of the EMR program, but does not include all the knowledge needed for an EMT program. The OEC-T program prepares out-of-hospital providers to care for patients in the wilderness, with special emphasis on snowsports pathology. The EMT program places a greater emphasis on medical disease and emergency medication administration. These differences should be considered when determining staffing requirements for agencies caring for patients with snowsports pathology. Copyright © 2012 Wilderness Medical Society. Published by Elsevier Inc. All rights reserved.

  2. Modeling of a nanoscale flexoelectric energy harvester with surface effects

    Science.gov (United States)

    Yan, Zhi

    2017-04-01

    This work presents the modeling of a beam energy harvester scavenging energy from ambient vibration based on the phenomenon of flexoelectricity. By considering surface elasticity, residual surface stress, surface piezoelectricity and bulk flexoelectricity, a modified Euler-Bernoulli beam model for the energy harvester is developed. After deriving the requisite energy expressions, the extended Hamilton's principle and the assumed-modes method are employed to obtain the discrete electromechanical Euler-Lagrange's equations. Then, the expressions of the steady-state electromechanical responses are given for harmonic base excitation. Numerical simulations are conducted to show the output voltage and the output power of the flexoelectric energy harvesters with different materials and sizes. Particular emphasis is given to the surface effects on the performance of the energy harvesters. It is found that the surface effects are sensitive to the beam geometries and the surface material constants, and the effect of residual surface stress is more significant than that of the surface elasticity and the surface piezoelectricity. The axial deformation of the beam is also considered in the model to account for the electromechanical coupling due to piezoelectricity, and results indicate that piezoelectricity will diminish the output electrical quantities for the case investigated. This work could lead to the development of flexoelectric energy harvesters that can make the micro- and nanoscale sensor systems autonomous.

  3. Ride control of surface effect ships using distributed control

    Directory of Open Access Journals (Sweden)

    Asgeir J. Sørensen

    1994-04-01

    Full Text Available A ride control system for active damping of heave and pitch accelerations of Surface Effect Ships (SES is presented. It is demonstrated that distributed effects that are due to a spatially varying pressure in the air cushion result in significant vertical vibrations in low and moderate sea states. In order to achieve a high quality human comfort and crew workability it is necessary to reduce these vibrations using a control system which accounts for distributed effects due to spatial pressure variations in the air cushion. A mathematical model of the process is presented, and collocated sensor and actuator pairs are used. The process stability is ensured using a controller with appropriate passivity properties. Sensor and actuator location is also discussed. The performance of the ride control system is shown by power spectra of the vertical accelerations obtained from full scale experiments with a 35 m SES.

  4. Surface effects on the thermal conductivity of silicon nanowires

    Science.gov (United States)

    Li, Hai-Peng; Zhang, Rui-Qin

    2018-03-01

    Thermal transport in silicon nanowires (SiNWs) has recently attracted considerable attention due to their potential applications in energy harvesting and generation and thermal management. The adjustment of the thermal conductivity of SiNWs through surface effects is a topic worthy of focus. In this paper, we briefly review the recent progress made in this field through theoretical calculations and experiments. We come to the conclusion that surface engineering methods are feasible and effective methods for adjusting nanoscale thermal transport and may foster further advancements in this field. Project supported by the National Natural Science Foundation ofChina (Grant No. 11504418), China Scholarship Council (Grant No. 201706425053), Basic Research Program in Shenzhen, China (Grant No. JCYJ20160229165210666), and the Fundamental Research Funds for the Central Universities of China (Grant No. 2015XKMS075).

  5. Fast Convolution Module (Fast Convolution Module)

    National Research Council Canada - National Science Library

    Bierens, L

    1997-01-01

    This report describes the design and realisation of a real-time range azimuth compression module, the so-called 'Fast Convolution Module', based on the fast convolution algorithm developed at TNO-FEL...

  6. Magnetic nanoparticles: surface effects and properties related to biomedicine applications.

    Science.gov (United States)

    Issa, Bashar; Obaidat, Ihab M; Albiss, Borhan A; Haik, Yousef

    2013-10-25

    Due to finite size effects, such as the high surface-to-volume ratio and different crystal structures, magnetic nanoparticles are found to exhibit interesting and considerably different magnetic properties than those found in their corresponding bulk materials. These nanoparticles can be synthesized in several ways (e.g., chemical and physical) with controllable sizes enabling their comparison to biological organisms from cells (10-100 μm), viruses, genes, down to proteins (3-50 nm). The optimization of the nanoparticles' size, size distribution, agglomeration, coating, and shapes along with their unique magnetic properties prompted the application of nanoparticles of this type in diverse fields. Biomedicine is one of these fields where intensive research is currently being conducted. In this review, we will discuss the magnetic properties of nanoparticles which are directly related to their applications in biomedicine. We will focus mainly on surface effects and ferrite nanoparticles, and on one diagnostic application of magnetic nanoparticles as magnetic resonance imaging contrast agents.

  7. Static stability analysis of embedded flexoelectric nanoplates considering surface effects

    Science.gov (United States)

    Ebrahimi, Farzad; Barati, Mohammad Reza

    2017-10-01

    In this paper, electromechanical buckling behavior of size-dependent flexoelectric nanoplates is investigated based on nonlocal and surface elasticity theories. Flexoelectricity represents the coupling between strain gradients and electrical polarizations. Flexoelectric nanoplates can tolerate higher buckling loads compared with conventional piezoelectric nanoplates, especially at lower thicknesses. The flexoelectric nanoplate is in contact with a two-parameter elastic foundation, which consists of infinite linear springs and a shear layer. Nonlocal elasticity theory of Eringen is applied in the analysis of flexoelectric nanoplates for the first time. The residual surface stresses which are usually neglected in the modeling of flexoelectric nanoplates are incorporated into nonlocal elasticity to provide better understanding of the physics of the problem. Applying an analytical solution which satisfies various boundary conditions, the governing equations obtained from Hamilton's principle are solved. The reliability of the present approach is verified by comparing the obtained results with those provided in literature. Finally, the influences of nonlocal parameter, surface effect, plate geometrical parameters, elastic foundation and boundary conditions on the buckling characteristics of flexoelectric nanoplates are explored.

  8. Police Districts, ZonePoly-The data set is a polygon feature consisting of 25 zones representing Spillman CAD patrol zones. It was created to maintain the Spillman computer aided dispatch system for the sheriff's office., Published in 2004, Davis County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Police Districts dataset current as of 2004. ZonePoly-The data set is a polygon feature consisting of 25 zones representing Spillman CAD patrol zones. It was created...

  9. Acid-fast stain

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/003766.htm Acid-fast stain To use the sharing features on this page, please enable JavaScript. The acid-fast stain is a laboratory test that determines ...

  10. Fast food (image)

    Science.gov (United States)

    Fast foods are quick, reasonably priced, and readily available alternatives to home cooking. While convenient and economical for a busy lifestyle, fast foods are typically high in calories, fat, saturated fat, ...

  11. Fast food tips (image)

    Science.gov (United States)

    ... challenge to eat healthy when going to a fast food place. In general, avoiding items that are deep ... challenge to eat healthy when going to a fast food place. In general, avoiding items that are deep ...

  12. Physiology of Ramadan fasting

    OpenAIRE

    Shokoufeh Bonakdaran

    2016-01-01

    Considering the emphasis of Islam on the importance of fasting, Muslims attempt to fast from dawn until sunset during the holy month of Ramadan. Fasting is associated with several benefits for normal and healthy individuals. However, it could pose high risks to the health of diabetic patients due to certain physiological changes. This study aimed to compare the physiological changes associated with fasting in healthy individuals and diabetic patients during Ramadan. Furthermore, we reviewed t...

  13. Ramadan, fasting and pregnancy

    DEFF Research Database (Denmark)

    Ahmed, Urfan Zahoor; Lykke, Jacob Alexander

    2014-01-01

    In Islam, the month of Ramadan is a period of fasting lasting 29 or 30 days. Epidemiological studies among Muslims in Denmark have not been conducted, but studies show, that fasting among pregnant Muslim women is common. Fasting does not increase the risk of growth restriction or preterm delivery...

  14. Ramadan, faste og graviditet

    DEFF Research Database (Denmark)

    Ahmed, Urfan Zahoor; Lykke, Jacob Alexander

    2014-01-01

    In Islam, the month of Ramadan is a period of fasting lasting 29 or 30 days. Epidemiological studies among Muslims in Denmark have not been conducted, but studies show, that fasting among pregnant Muslim women is common. Fasting does not increase the risk of growth restriction or preterm delivery......, but there are reports of decreased foetal movements. Furthermore, the fasting may have long-term health consequences for the offspring, especially when they reach their middle age. According to Islam and the interpretation, pregnant and breast-feeding women are allowed to postpone the fasting of the month of Ramadan...

  15. The effect of police cruiser restraint cage configuration on shoulder discomfort, muscular demands, upper limb postures, and task performance during simulated police patrol.

    Science.gov (United States)

    McKinnon, Colin D; Amy, Samantha A; Callaghan, Jack P; Dickerson, Clark R

    2014-11-01

    Advances in police-specific technology have led to changes in work layout and physical occupational demands of mobile police officers. This study investigated the influence of police cruiser compartment configuration on perceived discomfort, muscle activation, shoulder kinematics, and typing performance during simulated police patrol. Participants completed a one-hour session including simulated driving and 2-min typing trials in a standard compartment configuration with a fixed mobile data terminal (MDT) location (ST), and in a modified compartment configuration with an MDT in front of the user and a rearward translated seat (MOD). The MOD configuration resulted in reductions of 55-65% in perceived shoulder discomfort, up to 3.4% MVC in shoulder muscle demands, and more neutral humeral orientations (shoulder elevation reduced by 13-25°). These improvements associated with the MOD configuration may have ergonomic implications for future police car designs, particularly as new technology is introduced in the mobile environment and advanced solutions are sought. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  16. The fast breeder reactor

    International Nuclear Information System (INIS)

    Collier, J.

    1990-01-01

    The arguments for and against the fast breeder reactor are debated. The case for the fast reactor is that the world energy demand will increase due to increasing population over the next forty years and that the damage to the global environment from burning fossil fuels which contribute to the greenhouse effect. Nuclear fission is the only large scale energy source which can achieve a cut in the use of carbon based fuels although energy conservation and renewable sources will also be important. Fast reactors produce more energy from uranium than other types of (thermal) reactors such as AGRs and PWRs. Fast reactors would be important from about 2020 onwards especially as by then many thermal reactors will need to be replaced. Fast reactors are also safer than normal reactors. The arguments against fast reactors are largely economic. The cost, especially the capital cost is very high. The viability of the technology is also questioned. (UK)

  17. The vibrational and buckling behaviors of piezoelectric nanobeams with surface effects

    International Nuclear Information System (INIS)

    Yan, Z; Jiang, L Y

    2011-01-01

    In this work, the influence of surface effects, including residual surface stress, surface elasticity and surface piezoelectricity, on the vibrational and buckling behaviors of piezoelectric nanobeams is investigated by using the Euler-Bernoulli beam theory. The surface effects are incorporated by applying the surface piezoelectricity model and the generalized Young-Laplace equations. The results demonstrate that surface effects play a significant role in predicting these behaviors. It is found that the influence of the residual surface stress and the surface piezoelectricity on the resonant frequencies and the critical electric potential for buckling is more prominent than the surface elasticity. The nanobeam boundary conditions are also found to influence the surface effects on these parameters. This study also shows that the resonant frequencies can be tuned by adjusting the applied electrical load. The present study is envisaged to provide useful insights for the design and applications of piezoelectric-beam-based nanodevices.

  18. Surface effects on the electroelastic responses of a thin piezoelectric plate with nanoscale thickness

    International Nuclear Information System (INIS)

    Yan Zhi; Jiang Liying

    2012-01-01

    This work aims to investigate the electroelastic responses of a thin piezoelectric plate under mechanical and electrical loads with the consideration of surface effects. Surface effects, including surface elasticity, residual surface stress and surface piezoelectricity, are incorporated into the conventional Kirchhoff plate theory for a piezoelectric plate via the surface piezoelectricity model and the generalized Young-Laplace equations. Different from the results predicted by the conventional plate theory ignoring the surface effects, the proposed model predicts size-dependent behaviours of the piezoelectric thin plate with nanoscale thickness. It is found that surface effects have significant influence on the electroelastic responses of the piezoelectric nanoplate. This work is expected to provide more accurate predictions on characterizing nanofilm or nanoribbon based piezoelectric devices in nanoelectromechanical systems. (paper)

  19. Fast breeder reactors

    International Nuclear Information System (INIS)

    Heinzel, V.

    1975-01-01

    The author gives a survey of 'fast breeder reactors'. In detail the process of breeding, the reasons for the development of fast breeders, the possible breeder reactors, the design criteria, fuels, cladding, coolant, and safety aspects are reported on. Design data of some experimental reactors already in operation are summarized in stabular form. 300 MWe Prototype-Reactors SNR-300 and PFR are explained in detail and data of KWU helium-cooled fast breeder reactors are given. (HR) [de

  20. Islamic fasting and health.

    Science.gov (United States)

    Azizi, Fereidoun

    2010-01-01

    Muslims fast from sunrise to sunset during the month of Ramadan, the 9th lunar month. The duration of fasting varies from 13 to 18 h/day. Fasting includes avoidance of drinking liquids and eating foods. The aim of this article is to review health-related aspects of Ramadan fasting. Related abstracts from 1960 to 2009 were obtained from Medline and local journals in Islamic countries. One hundred and thirteen articles meeting the criteria for paper selection were reviewed in depth to identify details of related materials. During the fasting days of Ramadan glucose homeostasis is maintained by meals taken before dawn and by liver glycogen stores. Changes in serum lipids are variable and depend on the quality and quantity of food consumption and changes in weight. Compliant, well-controlled type 2 diabetics may observe Ramadan fasting, but fasting is not recommended for type 1, noncompliant, poorly controlled and pregnant diabetics. There are no adverse effects of Ramadan fasting on the heart, lung, liver, kidney, eyes, hematologic profile, endocrine and neuropsychiatric functions. Although Ramadan fasting is safe for all healthy individuals, those with various diseases should consult their physicians and follow scientific recommendations.

  1. Islamic Fasting and Diabetes

    Directory of Open Access Journals (Sweden)

    Fereidoun Azizi

    2013-07-01

    Full Text Available The aim of this article is to review health-related aspects of Ramadan fasting in normal individuals and diabetics. During fasting days of Ramadan, glucose homeostasis is maintained by meal taken bepore dawn and by liver glycogen stores. Changes in serum lipids are variable and defend on the quality and quantity of food consumption and changes in weight. Compliant, well controlled type 2 diabetics may observe Ramadan fasting; but fasting is not recommended for type 1, non complaint, poorly controlled and pregnant diabetics. Although Ramadan fasting is safe for all healthy individuals and well controlled diabetics, those with uncontrolled diabetics and diabetics with complications should consult physicians and follow scientific recommendations.

  2. Fast Spectrum Reactors

    CERN Document Server

    Todd, Donald; Tsvetkov, Pavel

    2012-01-01

    Fast Spectrum Reactors presents a detailed overview of world-wide technology contributing to the development of fast spectrum reactors. With a unique focus on the capabilities of fast spectrum reactors to address nuclear waste transmutation issues, in addition to the well-known capabilities of breeding new fuel, this volume describes how fast spectrum reactors contribute to the wide application of nuclear power systems to serve the global nuclear renaissance while minimizing nuclear proliferation concerns. Readers will find an introduction to the sustainable development of nuclear energy and the role of fast reactors, in addition to an economic analysis of nuclear reactors. A section devoted to neutronics offers the current trends in nuclear design, such as performance parameters and the optimization of advanced power systems. The latest findings on fuel management, partitioning and transmutation include the physics, efficiency and strategies of transmutation, homogeneous and heterogeneous recycling, in addit...

  3. Fast ejendom III

    DEFF Research Database (Denmark)

    Munk-Hansen, Carsten

    Bogen er det tredje bind af tre planlagte bind om fast ejendom: I Overdragelsen, II Bolighandlen og III Ejerbeføjelsen. Fremstillingens giver et grundigt overblik over centrale områder af en omfattende regulering af fast ejendom, med angivelse af litteratur, hvor læseren kan søge yderligere...... oplysning. En ejer af fast ejendom er på særdeles mange områder begrænset i sin råden sammenlignet med ejeren af et formuegode i almindelighed. Fremstillingen tager udgangspunkt i ejerens perspektiv (fremfor samfundets eller myndighedernes). Både den privatretlige og offentligretlige regulering behandles......, eksempelvis ejendomsdannelsen, servitutter, naboretten, hævd, zoneinddelingen, den fysiske planlægning, beskyttelse af natur, beskyttelse af kultur, forurening fra fast ejendom, erstatning for forurening, jordforurening, ekspropriation, byggeri og adgang til fast ejendom....

  4. Surface effect on band structure of flexural wave propagating in magneto-elastic phononic crystal nanobeam

    International Nuclear Information System (INIS)

    Zhang, Shunzu; Gao, Yuanwen

    2017-01-01

    A theoretical model is established to study the size-dependent performance of flexural wave propagation in magneto-elastic phononic crystal (PC) nanobeam with surface effect based on Euler–Bernoulli beam theory and Gurtin–Murdoch theory. Considering the magneto-mechanical coupling constitutive relation of magnetostrictive material, the influence of surface effect on band structure is calculated by the plane wave expansion method for PC nanobeam subjected to pre-stress and magnetic field loadings. Through the example of an epoxy/Terfenol-D PC nanobeam, it can be observed that the characteristics of flexural wave band structures are size-dependent, and remarkably affected by surface effect when the dimension of the PC beam reduces to the nanoscale. The edges and width of the band gap with surface effect are higher than those without surface effect, especially for high frequency region. And surface effect gradually reduces with the increasing of bulk layer-to-surface layer thickness ratio until the band gap descends to a constant for the conventional one in the absence of surface effect. The effects of surface elasticity and piezomagneticity on band gap are more prominent than the residual surface stress. In addition, a distinctly nonlinear variation of band gap appears under the combined effects of pre-stress and magnetic field. Moreover, with the varying of filling fraction, multi-peaks of the width of the band gap are obtained and discussed. These results could be helpful for the intelligent regulation of magneto-elastic PC nanobeam and the design of nanobeam-based devices. (paper)

  5. Surface effect on band structure of flexural wave propagating in magneto-elastic phononic crystal nanobeam

    Science.gov (United States)

    Zhang, Shunzu; Gao, Yuanwen

    2017-11-01

    A theoretical model is established to study the size-dependent performance of flexural wave propagation in magneto-elastic phononic crystal (PC) nanobeam with surface effect based on Euler-Bernoulli beam theory and Gurtin-Murdoch theory. Considering the magneto-mechanical coupling constitutive relation of magnetostrictive material, the influence of surface effect on band structure is calculated by the plane wave expansion method for PC nanobeam subjected to pre-stress and magnetic field loadings. Through the example of an epoxy/Terfenol-D PC nanobeam, it can be observed that the characteristics of flexural wave band structures are size-dependent, and remarkably affected by surface effect when the dimension of the PC beam reduces to the nanoscale. The edges and width of the band gap with surface effect are higher than those without surface effect, especially for high frequency region. And surface effect gradually reduces with the increasing of bulk layer-to-surface layer thickness ratio until the band gap descends to a constant for the conventional one in the absence of surface effect. The effects of surface elasticity and piezomagneticity on band gap are more prominent than the residual surface stress. In addition, a distinctly nonlinear variation of band gap appears under the combined effects of pre-stress and magnetic field. Moreover, with the varying of filling fraction, multi-peaks of the width of the band gap are obtained and discussed. These results could be helpful for the intelligent regulation of magneto-elastic PC nanobeam and the design of nanobeam-based devices.

  6. Fast track-hoftealloplastik

    DEFF Research Database (Denmark)

    Hansen, Torben Bæk; Gromov, Kirill; Kristensen, Billy B

    2017-01-01

    Fast-track surgery implies a coordinated perioperative approach aimed at reducing surgical stress and facilitating post-operative recovery. The fast-track programme has reduced post-operative length of stay and has led to shorter convalescence with more rapid functional recovery and decreased...... morbidity and mortality in total hip arthroplasty. It should now be a standard total hip arthroplasty patient pathway, but fine tuning of the multiple factors in the fast-track pathway is still needed in patients with special needs or high comorbidity burden....

  7. Fast Breeder Reactor studies

    International Nuclear Information System (INIS)

    Till, C.E.; Chang, Y.I.; Kittel, J.H.; Fauske, H.K.; Lineberry, M.J.; Stevenson, M.G.; Amundson, P.I.; Dance, K.D.

    1980-07-01

    This report is a compilation of Fast Breeder Reactor (FBR) resource documents prepared to provide the technical basis for the US contribution to the International Nuclear Fuel Cycle Evaluation. The eight separate parts deal with the alternative fast breeder reactor fuel cycles in terms of energy demand, resource base, technical potential and current status, safety, proliferation resistance, deployment, and nuclear safeguards. An Annex compares the cost of decommissioning light-water and fast breeder reactors. Separate abstracts are included for each of the parts

  8. Fast Breeder Reactor studies

    Energy Technology Data Exchange (ETDEWEB)

    Till, C.E.; Chang, Y.I.; Kittel, J.H.; Fauske, H.K.; Lineberry, M.J.; Stevenson, M.G.; Amundson, P.I.; Dance, K.D.

    1980-07-01

    This report is a compilation of Fast Breeder Reactor (FBR) resource documents prepared to provide the technical basis for the US contribution to the International Nuclear Fuel Cycle Evaluation. The eight separate parts deal with the alternative fast breeder reactor fuel cycles in terms of energy demand, resource base, technical potential and current status, safety, proliferation resistance, deployment, and nuclear safeguards. An Annex compares the cost of decommissioning light-water and fast breeder reactors. Separate abstracts are included for each of the parts.

  9. The pore-load modulus of ordered nanoporous materials with surface effects

    Science.gov (United States)

    Liu, Mingchao; Wu, Jian; Gan, Yixiang; Chen, C. Q.

    2016-03-01

    Gas and liquid adsorption-induced deformation of ordered porous materials is an important physical phenomenon with a wide range of applications. In general, the deformation can be characterized by the pore-load modulus and, when the pore size reduces to nanoscale, it is affected by surface effects and shows prominent size-dependent features. In this Letter, the influence of surface effects on the elastic properties of ordered nanoporous materials with internal pressure is accounted for in a single pore model. A porosity and surface elastic constants dependent closed form solution for the size dependent pore-load modulus is obtained and verified by finite element simulations and available experimental results. In addition, it is found to depend on the geometrical arrangement of pores. This study provides an efficient tool to analyze the surface effects on the elastic response of ordered nanoporous materials.

  10. Fast and pure

    Science.gov (United States)

    De Franceschi, Silvano

    2018-02-01

    Removing nuclear spins by means of isotopically purified silicon, and introducing magnetic field gradients by means of microfabricated ferromagnets yields electron spin qubits with enhanced fidelity and fast electrical control.

  11. Fast neutrons dosimetry

    International Nuclear Information System (INIS)

    Rzyski, B.M.

    1977-01-01

    A proton recoil technique has been developed for inducing thermoluminescence with incident fast neutrons. CaF 2 was used as the TL phosphor, and cane sugar and polyethylene were used as proton radiators. The phosphor and the hydrogeneous material powders were well mixed, encapsulated in glass tubes and exposed to Am-Be sources, resulting in recoils from incident fast neutrons of energy between 0,25 and 11,25 MeV. The intrinsic response of pure CaF 2 to fast neutrons without a hydrogeneous radiator was checked by using LiF (TLD-700). Glow curves were recorded from room temperature up to 350 0 C after different doses of neutrons and gamma rays of 60 Co. First collision dose due to fast neutrons in tissue like materials such as cane sugar and polyethylene was also calculated [pt

  12. Fast Optimal Motion Planning

    Data.gov (United States)

    National Aeronautics and Space Administration — Computationally-efficient, fast and real-time, and provably-optimal motion planner for systems with highly nonlinear dynamics that can be extended for cooperative...

  13. CMS Fast Facts

    Data.gov (United States)

    U.S. Department of Health & Human Services — CMS has developed a new quick reference statistical summary on annual CMS program and financial data. CMS Fast Facts includes summary information on total program...

  14. Brug af faste vendinger

    DEFF Research Database (Denmark)

    Bergenholtz, Henning; Bjærge, Esben

    Ordbogen indelholder tekstproduktionsangivelser til ca. 17.000 idiomer, ordsprog, bevingede ord og andre faste vendinger. Det drejer sig bl.a. om angivelser til betydningen, grammatik, kollokationer, eksempler, synonymer og antonymer.......Ordbogen indelholder tekstproduktionsangivelser til ca. 17.000 idiomer, ordsprog, bevingede ord og andre faste vendinger. Det drejer sig bl.a. om angivelser til betydningen, grammatik, kollokationer, eksempler, synonymer og antonymer....

  15. Fast focus field calculations

    OpenAIRE

    Leutenegger, M.; Rao, R.; Leitgeb, R. A.; Lasser, T.

    2006-01-01

    We present a fast calculation of the electromagnetic field near the focus of an objective with a high numerical aperture (NA). Instead of direct integration, the vectorial Debye diffraction integral is evaluated with the fast Fourier transform for calculating the electromagnetic field in the entire focal region. We generalize this concept with the chirp z transform for obtaining a flexible sampling grid and an additional gain in computation speed. Under ...

  16. Fasting and Urinary Stones

    Directory of Open Access Journals (Sweden)

    Ali Shamsa

    2013-11-01

    Full Text Available Introduction: Fasting is considered as one of the most important practices of Islam, and according to Prophet Mohammad, fasting is obligatory upon Muslims. The aim of this study is to evaluate the effects of fasting on urinary stones. Materials and Methods: Very few studies have been carried out on urinary stones and the effect of Ramadan fasting. The sources of the present study are Medline and articles presented by local and Muslim researchers. Meanwhile, since we are acquainted with three well-known researchers in the field of urology, we contacted them via email and asked for their professional opinions. Results: The results of studies about the relationship of urinary stones and their incidence in Ramadan are not alike, and are even sometimes contradictory. Some believe that increased incidence of urinary stones in Ramadan is related not to fasting, but to the rise of weather temperature in hot months, and an increase in humidity. Conclusion: Numerous biological and behavioral changes occur in people who fast in Ramadan and some researchers believe that urinary stone increases during this month.

  17. Near-surface effects on the controlled motion of magnetotactic bacteria

    NARCIS (Netherlands)

    Khalil, Islam S.M.; Tabak, Ahmet Fatih; Hageman, Tijmen; Ewis, Mohamed; Pichel, Marc; Mitwally, Mohamed E.; El-Din, Nermeen Serag; Abelmann, Leon; Sitti, Metin

    2017-01-01

    Magnetotactic bacteria have the potential to controllably reach stagnant fluids inside the human body and achieve targeted drug delivery. In this application, motion of the magnetotactic bacteria is influenced by the near-surface effects such as the background flows and surface interactions. Here,

  18. Cervical Spine Alignment in Helmeted Skiers and Snowboarders With Suspected Head and Neck Injuries: Comparison of Lateral C-spine Radiographs Before and After Helmet Removal and Implications for Ski Patrol Transport.

    Science.gov (United States)

    Murray, Jared; Rust, David A

    2017-09-01

    Current protocols for spine immobilization of the injured skier/snowboarder have not been scientifically validated. Observing changes in spine alignment during common rescue scenarios will help strengthen recommendations for rescue guidelines. Twenty-eight healthy volunteers (18 men, 10 women) age 47±17 (range 20-73) (mean ±SD with range) underwent a mock rescue in which candidate patrollers completing an Outdoor Emergency Care course performed spine immobilization and back boarding in 3 scenarios: 1) Ski helmet on, no c-collar; 2) helmet on, with c-collar; and 3) helmet removed, with c-collar. After each scenario, a lateral radiograph was taken of the cervical spine to observe for changes in alignment. Compared with the control group (helmet on, no collar), we observed 9 degrees of increased overall (occiput-C7) cervical extension in the helmet on, with collar group (P Ski helmet removal and c-collar application each leads to increased extension of the cervical spine. In the absence of other clinical factors, our recommendation is that helmets should be left in place and c-collars not routinely applied during ski patrol rescue. Copyright © 2017 Wilderness Medical Society. Published by Elsevier Inc. All rights reserved.

  19. Fast breeder reactors

    International Nuclear Information System (INIS)

    Waltar, A.E.; Reynolds, A.B.

    1981-01-01

    This book describes the major design features of fast breeder reactors and the methods used for their design and analysis. The foremost objective of this book is to fulfill the need for a textbook on Fast Breeder Reactor (FBR) technology at the graduate level or the advanced undergraduate level. It is assumed that the reader has an introductory understanding of reactor theory, heat transfer, and fluid mechanics. The book is expected to be used most widely for a one-semester general course on fast breeder reactors, with the extent of material covered to vary according to the interest of the instructor. The book could also be used effectively for a two-quarter or a two-semester course. In addition, the book could serve as a text for a course on fast reactor safety since many topics other than those appearing in the safety chapters relate to FBR safety. Methodology in fast reactor design and analysis, together with physical descriptions of systems, is emphasized in this text more than numerical results. Analytical and design results continue to change with the ongoing evolution of FBR design whereas many design methods have remained fundamentally unchanged for a considerable time

  20. Fast reactor programme

    International Nuclear Information System (INIS)

    Plakman, J.C.

    1982-01-01

    This progress report summarizes the fast reactor research carried out by ECN during the period covering the year 1980. This research is mainly concerned with the cores of sodium-cooled breeders, in particular the SNR-300, and its related safety aspects. It comprises six items: A programme to determine relevant nuclear data of fission- and corrosion-products; A fuel performance programme comprising in-pile cladding failure experiments and a study of the consequences of loss-of-cooling and overpower; Basic research on fuel; Investigation of the changes in the mechanical properties of austenitic stainless steel DIN 1.4948 due to fast neutron doses, this material has been used in the manufacture of the reactor vessel and its internal components; Study of aerosols which could be formed at the time of a fast reactor accident and their progressive behaviour on leaking through cracks in the concrete containment; Studies on heat transfer in a sodium-cooled fast reactor core. As fast breeders operate at high power densities, an accurate knowledge of the heat transfer phenomena under single-phase and two-phase conditions is sought. (Auth.)

  1. The fast code

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, L.N.; Wilson, R.E. [Oregon State Univ., Dept. of Mechanical Engineering, Corvallis, OR (United States)

    1996-09-01

    The FAST Code which is capable of determining structural loads on a flexible, teetering, horizontal axis wind turbine is described and comparisons of calculated loads with test data are given at two wind speeds for the ESI-80. The FAST Code models a two-bladed HAWT with degrees of freedom for blade bending, teeter, drive train flexibility, yaw, and windwise and crosswind tower motion. The code allows blade dimensions, stiffnesses, and weights to differ and models tower shadow, wind shear, and turbulence. Additionally, dynamic stall is included as are delta-3 and an underslung rotor. Load comparisons are made with ESI-80 test data in the form of power spectral density, rainflow counting, occurrence histograms, and azimuth averaged bin plots. It is concluded that agreement between the FAST Code and test results is good. (au)

  2. Adopting preoperative fasting guidelines.

    Science.gov (United States)

    Anderson, Megan; Comrie, Rhonda

    2009-07-01

    In 1999, the American Society of Anesthesiologists adopted preoperative fasting guidelines to enhance the quality and efficiency of patient care. Guidelines suggest that healthy, non-pregnant patients should fast six hours from solids and two hours from liquids. Although these guidelines are in place, studies suggest that providers are still using the blanket statement "NPO after midnight" without regard to patient characteristics, the procedure, or the time of the procedure. Using theory to help change provider's beliefs may help make change more successful. Rogers' Theory of Diffusion of Innovations can assist in changing long-time practice by laying the groundwork for an analysis of the benefits and disadvantages of proposed changes, such as changes to fasting orders, while helping initiate local protocols instead of additional national guidelines.

  3. Proton Fast Ignition

    International Nuclear Information System (INIS)

    Key, M H; Freeman, R R; Hatchett, S P; MacKinnon, A J; Patel, P K; Snavely, R A; Stephens, R B

    2006-04-01

    Fast ignition (FI) by a laser generated ballistically focused proton beam is a more recently proposed alternative to the original concept of FI by a laser generated beam of relativistic electrons. It has potential advantages in less complex energy transport into dense plasma. Recent successful target heating experiments motivate further investigation of the feasibility of proton fast ignition. The concept, the physics and characteristics of the proton beams, the recent experimental work on focusing of the beams and heating of solid targets and the overall prospects for proton FI are discussed

  4. A Fast Hermite Transform.

    Science.gov (United States)

    Leibon, Gregory; Rockmore, Daniel N; Park, Wooram; Taintor, Robert; Chirikjian, Gregory S

    2008-12-17

    We present algorithms for fast and stable approximation of the Hermite transform of a compactly supported function on the real line, attainable via an application of a fast algebraic algorithm for computing sums associated with a three-term relation. Trade-offs between approximation in bandlimit (in the Hermite sense) and size of the support region are addressed. Numerical experiments are presented that show the feasibility and utility of our approach. Generalizations to any family of orthogonal polynomials are outlined. Applications to various problems in tomographic reconstruction, including the determination of protein structure, are discussed.

  5. Fast breeder project (PSB)

    International Nuclear Information System (INIS)

    1976-07-01

    Activities performed during the 1st quarter of 1976 at or on behalf of the Gesellschaft fuer Kernforschung mbH, Karlsruhe, within the framework of the Fast Breeder Project are given a survey. The following project subdivisions are dealt with: Fuel rod development; materials testing and developments; corrosion studies and coolant analyses; physical experiments; reactor theory; safety of fast breeders; instrumentation and signal processing for core monitoring; effects on the environment; sodium technology tests; thermodynamic and fluid flow tests in gas. (HR) [de

  6. Fast neutron dosimetry

    International Nuclear Information System (INIS)

    DeLuca, P.M. Jr.; Pearson, D.W.

    1993-01-01

    Research concentrated on three major areas during the last twelve months: (1) investigations of energy fluence and absorbed dose measurements using crystalline and hot pressed TLD materials exposes to ultrasoft beams of photons, (2) fast neutron kerma factor measurements for several important elements as well as NE-213 scintillation material response function determinations at the intense ''white'' source available at the WNR facility at LAMPF, and (3) kerma factor ratio determinations for carbon and oxygen to A-150 tissue equivalent plastic at the clinical fast neutron radiation facility at Harper Hospital, Detroit, MI. Progress summary reports of these efforts are given in this report

  7. Moms og fast ejendom

    DEFF Research Database (Denmark)

    Edlund, Hans Henrik

    1999-01-01

    I artiklen gives et overblik over, hvorledes fast ejendom behandles momsmæssigt. Derfor findes en kort skitsering af reglerne for moms på byggearbejder, afgrænsningen mellem momspligtig og momsfri udlejning, muligheden for frivillig registrering af udlejning samt opgørelse af reguleringsforpligte......I artiklen gives et overblik over, hvorledes fast ejendom behandles momsmæssigt. Derfor findes en kort skitsering af reglerne for moms på byggearbejder, afgrænsningen mellem momspligtig og momsfri udlejning, muligheden for frivillig registrering af udlejning samt opgørelse af...

  8. Fast ejendom II

    DEFF Research Database (Denmark)

    Munk-Hansen, Carsten

    Fremstillingen påviser, at lov om forbrugerbeskyttelse ved erhvervelse af fast ejendom mv. lider af en række svagheder og at ankenævnspraksis bevæger sig væk fra retspraksis på en række områder.......Fremstillingen påviser, at lov om forbrugerbeskyttelse ved erhvervelse af fast ejendom mv. lider af en række svagheder og at ankenævnspraksis bevæger sig væk fra retspraksis på en række områder....

  9. CMS Fast Simulation

    CERN Document Server

    Rahmat, Rahmat

    2012-01-01

    A framework for Fast Simulation of particle interactions in the CMS detector has been developed and implemented in the overall simulation, reconstruction and analysis framework of CMS. It produces data samples in the same format as the one used by the Geant4-based (henceforth Full) Simulation and Reconstruction chain; the output of the Fast Simulation of CMS can therefore be used in the analysis in the same way as other ones. The Fast Simulation has been used already for several physics analyses in CMS, in particular those requiring a generation of many samples to scan an extended parameter space of the physics model (e.g. SUSY). Other use cases dealt with by the Fast Simulation of CMS are those involving the generation of large cross-section backgrounds, and samples of manageable size can only be produced by events skimming based on the final reconstructed objects, or those for which in general a large computation time is foreseen. An important issue, related with the high luminosity achieved by the LHC acce...

  10. FAST compiler user's guide

    NARCIS (Netherlands)

    Hartel, Pieter H.; Glaser, Hugh; Wild, John

    1993-01-01

    The FAST compiler is a backend for compilers of lazy functional languages. There are two versions of the compiler: one that takes a rather simple lazy functional language as input and a second that accepts a language similar to Miranda. On output the compiler produces a set of macro calls that are

  11. Parallel Fast Legendre Transform

    NARCIS (Netherlands)

    Alves de Inda, M.; Bisseling, R.H.; Maslen, D.K.

    1998-01-01

    We discuss a parallel implementation of a fast algorithm for the discrete polynomial Legendre transform We give an introduction to the DriscollHealy algorithm using polynomial arithmetic and present experimental results on the eciency and accuracy of our implementation The algorithms were

  12. ATLAS fast physics monitoring

    Indian Academy of Sciences (India)

    The ATLAS experiment at the Large Hadron Collider is recording data from proton–proton collisions at a centre-of-mass energy of 7 TeV since the spring of 2010. The integrated luminosity has grown nearly exponentially since then and continues to rise fast. The ATLAS Collaboration has set up a framework to automatically ...

  13. ATLAS fast physics monitoring

    Indian Academy of Sciences (India)

    The ATLAS Collaboration has set up a framework to automatically process the rapidly growing dataset and produce performance and physics plots for the most interesting analyses. The system is designed to give fast feedback. The histograms are produced within hours of data reconstruction (2–3 days after data taking).

  14. [Preoperative fasting. An update].

    Science.gov (United States)

    Spies, C D; Breuer, J P; Gust, R; Wichmann, M; Adolph, M; Senkal, M; Kampa, U; Weissauer, W; Schleppers, A; Soreide, E; Martin, E; Kaisers, U; Falke, K J; Haas, N; Kox, W J

    2003-11-01

    In Germany the predominant standard of preoperative care for elective surgery is fasting after midnight, with the aim of reducing the risk of pulmonary aspiration. However, for the past several years the scientific evidence supporting such a practice has been challenged. Experimental and clinical studies prove a reliable gastric emptying within 2 h suggesting that, particularly for limited intake of clear fluids up to 2 h preoperatively, there would be no increased risk for the patient. In addition, the general incidence of pulmonary aspiration during general anaesthesia (before induction, during surgery and during recovery) is extremely low, has a good prognosis and is more a consequence of insufficient airway protection and/or inadequate anaesthetic depth rather than due to the patient's fasting state. Therefore, primarily to decrease perioperative discomfort for patients, several national anaesthesia societies have changed their guidelines for preoperative fasting. They recommend a more liberal policy regarding per os intake of both liquid and solid food, with consideration of certain conditions and contraindications. The following article reviews the literature and gives an overview of the scientific background on which the national guidelines are based. The intention of this review is to propose recommendations for preoperative fasting regarding clear fluids for Germany as well.

  15. Integral Fast Reactor Program

    International Nuclear Information System (INIS)

    Chang, Y.I.; Walters, L.C.; Laidler, J.J.; Pedersen, D.R.; Wade, D.C.; Lineberry, M.J.

    1993-06-01

    This report summarizes highlights of the technical progress made in the Integral Fast Reactor (IFR) Program in FY 1992. Technical accomplishments are presented in the following areas of the IFR technology development activities: (1) metal fuel performance, (2) pyroprocess development, (3) safety experiments and analyses, (4) core design development, (5) fuel cycle demonstration, and (6) LMR technology R ampersand D

  16. Handel med fast ejendom

    DEFF Research Database (Denmark)

    Edlund, Hans Henrik

    Bogen tilstræber at give et overblik over nogle af de vigtigste generelle problemområder på markedet for ejendomshandel, der jo bliver mere og mere kompliceret. Værket er opdelt i følgende hovedafsnit: Ejendomsbegrebet. Indgåelse af aftale om salg af fast ejendom. Begrænsninger i adgangen til...

  17. Fast ejendom, I

    DEFF Research Database (Denmark)

    Munk-Hansen, Carsten

    , værdiforringende forhold, der ligger uden for ejendommen og andre særlige tilfælde. Bogen uddyber andre emner omtalt i 1. udgave, eksempelvis erhvervelsesbetingelser, købsoptioner, ansvarsfraskrivelse, licitationssalg mv. Bogen er det første af tre planlagte bind om fast ejendom: I Overdragelsen, II Bolighandlen...

  18. Fast Harmonic Chirp Summation

    DEFF Research Database (Denmark)

    Nielsen, Jesper Kjær; Jensen, Tobias Lindstrøm; Jensen, Jesper Rindom

    2017-01-01

    -robust to noise, or very computationally inten- sive. In this paper, we propose a fast algorithm for the harmonic chirp summation method which has been demonstrated in the liter- ature to be accurate and robust to noise. The proposed algorithm is orders of magnitudes faster than previous algorithms which is also...

  19. The Integral Fast Reactor

    International Nuclear Information System (INIS)

    Till, C.E.; Chang, Y.I.; Lineberry, M.J.

    1990-01-01

    Argonne National Laboratory, since 1984, has been developing the Integral Fast Reactor (IFR). This paper will describe the way in which this new reactor concept came about; the technical, public acceptance, and environmental issues that are addressed by the IFR; the technical progress that has been made; and our expectations for this program in the near term. 5 refs., 3 figs

  20. Integral Fast Reactor concept

    Energy Technology Data Exchange (ETDEWEB)

    Till, C.E.; Chang, Y.I.

    1986-01-01

    The Integral Fast Reactor (IFR) is an innovative LMR concept, being developed at Argonne National Laboratory, that fully exploits the inherent properties of liquid metal cooling and metallic fuel to achieve breakthroughs in economics and inherent safety. This paper describes key features and potential advantages of the IFR concept, technology development status, fuel cycle economics potential, and future development path.

  1. Integral Fast Reactor concept

    International Nuclear Information System (INIS)

    Till, C.E.; Chang, Y.I.

    1986-01-01

    The Integral Fast Reactor (IFR) is an innovative LMR concept, being developed at Argonne National Laboratory, that fully exploits the inherent properties of liquid metal cooling and metallic fuel to achieve breakthroughs in economics and inherent safety. This paper describes key features and potential advantages of the IFR concept, technology development status, fuel cycle economics potential, and future development path

  2. Calorie count - fast food

    Science.gov (United States)

    ... GO About MedlinePlus Site Map FAQs Customer Support Health Topics Drugs & Supplements Videos & Tools Español You Are Here: Home → Medical Encyclopedia → Calorie count - fast food URL of this page: //medlineplus.gov/ency/patientinstructions/ ...

  3. Fast Air Temperature Sensors

    DEFF Research Database (Denmark)

    Hendricks, Elbert

    1998-01-01

    The note documents briefly work done on a newly developed sensor for making fast temperature measurements on the air flow in the intake ports of an SI engine and in the EGR input line. The work reviewed has been carried out in close cooperation with Civ. Ing. Michael Føns, the author (IAU...

  4. Fast Fourier orthogonalization

    NARCIS (Netherlands)

    L. Ducas (Léo); T. Prest; S.A. Abramov; E.V. Zima; X-S. Gao

    2016-01-01

    htmlabstractThe classical fast Fourier transform (FFT) allows to compute in quasi-linear time the product of two polynomials, in the {\\em circular convolution ring} R[x]/(x^d−1) --- a task that naively requires quadratic time. Equivalently, it allows to accelerate matrix-vector products when the

  5. Surface effects on the vibration behavior of flexoelectric nanobeams based on nonlocal elasticity theory

    Science.gov (United States)

    Ebrahimi, Farzad; Reza Barati, Mohammad

    2017-01-01

    In this research, vibration characteristics of a flexoelectric nanobeam in contact with Winkler-Pasternak foundation is investigated based on the nonlocal elasticity theory considering surface effects. This nonclassical nanobeam model contains flexoelectric effect to capture coupling of strain gradients and electrical polarizations. Moreover, the nonlocal elasticity theory is employed to study the nonlocal and long-range interactions between the particles. The present model can degenerate into the classical model if the nonlocal parameter, flexoelectric and surface effects are omitted. Hamilton's principle is employed to derive the governing equations and the related boundary conditions which are solved applying a Galerkin-based solution. Natural frequencies are verified with those of previous papers on nanobeams. It is illustrated that flexoelectricity, nonlocality, surface stresses, elastic foundation and boundary conditions affects considerably the vibration frequencies of piezoelectric nanobeams.

  6. Surface effect theory in binary alloys: surfaces with cut-off

    International Nuclear Information System (INIS)

    Kumar, V.; Silva, C.E.T.G. da; Moran-Lopez, J.L.

    1981-01-01

    A surface effect theory in binary alloys which ore ordered with surfaces with cut-off is presented. This theory is based in a model of pair interaction between first neighbours and includes long and short range effects. The (120) surface with sup(-) (110) monoatomic cut-off and terrace in the (110) planes of an alloy with body centered cubic structure is presented as example. Results for the concentrations in all the different surface sites are given. (L.C.) [pt

  7. The Wafer and Diffusion Lot Dependence of Surface Effects Resulting from Ionizing Radiation,

    Science.gov (United States)

    An investigation of the wafer and diffusion lot dependence of surface effects resulting from ionizing radiation was conducted by irradiating samples...of transistors. The transistors were selected by the wafer and diffusion lot from which they were produced. Both NPN and PNP transistors were...the diffusion lot . With the PNP’s which were not effected to the same extent as the NPN’s the dependence on the wafer or diffusion lot was not

  8. Surface effects on anti-plane shear waves propagating in magneto-electro-elastic nanoplates

    International Nuclear Information System (INIS)

    Wu, Bin; Zhang, Chunli; Chen, Weiqiu; Zhang, Chuanzeng

    2015-01-01

    Material surfaces may have a remarkable effect on the mechanical behavior of magneto-electro-elastic (or multiferroic) structures at nanoscale. In this paper, a surface magneto-electro-elasticity theory (or effective boundary condition formulation), which governs the motion of the material surface of magneto-electro-elastic nanoplates, is established by employing the state-space formalism. The properties of anti-plane shear (SH) waves propagating in a transversely isotropic magneto-electro-elastic plate with nanothickness are investigated by taking surface effects into account. The size-dependent dispersion relations of both antisymmetric and symmetric SH waves are presented. The thickness-shear frequencies and the asymptotic characteristics of the dispersion relations considering surface effects are determined analytically as well. Numerical results show that surface effects play a very pronounced role in elastic wave propagation in magneto-electro-elastic nanoplates, and the dispersion properties depend strongly on the chosen surface material parameters of magneto-electro-elastic nanoplates. As a consequence, it is possible to modulate the waves in magneto-electro-elastic nanoplates through surface engineering. (paper)

  9. Electromechanical response of a curved piezoelectric nanobeam with the consideration of surface effects

    International Nuclear Information System (INIS)

    Yan Zhi; Jiang Liying

    2011-01-01

    This work investigates the electromechanical response of a curved piezoelectric nanobeam with the consideration of surface effects through the surface-layer-based model and the generalized Young-Laplace equations. For nanoscale piezoelectric structures, the surface effects also include surface piezoelectricity in addition to the residual surface stress and surface elasticity for elastic nanomaterials. A Euler-Bernoulli curved beam theory is used to get the explicit solutions for the electroelastic fields of a curved cantilever beam when subjected to mechanical and electrical loads. In order to apply the appropriate boundary conditions on the beam, effective axial force, shear force and moment are derived. The results indicate that the surface effects play a significant role in the electroelastic fields and the piezoelectric response of the curved piezoelectric nanobeam. It is also found that the coupling of the residual surface stress, the surface elasticity and the surface piezoelectricity may be dramatic despite that the influence of the individual one is small under some circumstances. This study is expected to be useful for design and applications of curved beam based piezoelectric nanodevices, such as the curved nanowires/nanobelts or nanorings as nanoswitches or nanoactuators for displacement control purpose.

  10. Study of the functinal characteristics and of the boot use by military policeman and its influence in the performance in the activity of patrol

    Directory of Open Access Journals (Sweden)

    Ana Claudia Vieira Martins

    2005-06-01

    Full Text Available This descriptive diagnosis study had the objective to evaluate the functional characteristics and the use of the boots worn by the police officers while they are on duty patrol walking on Florianópolis streets, as well as the influency of the boots in this activity. Selected by not-probabilistic sampling in a casual-systematic way, 234 police officers volunteered to take part in this study. The instrument used was a questionnaire assorted with clarity level of 0.93, validity of 0.85 and reliability of 0.95. According to the results, most police officers have only a pair of boots, which were worn on average 11 hours daily. To the boot usage was attributed the incidence of foot injuries such as callosity, chilblain, embedded nails and blisters. For these police officers the discomforts (overheating, pain and humidity on the feet as well as pain in the body caused by the boot interfered in their work routine taking them to classified their shoes as inappropriate, following the criteria of comfort, safety and durability. Therefore, it was concluded that the boots seemed not to be the ideal shoes in terms of comfort and job performance, because they interfered in their daily routine, causing functional and structural adaptations in the human body during the performance of motor tasks. RESUMO Este estudo descritivo diagnóstico teve como objetivo avaliar as características funcionais e de uso do coturno utilizado pelos policiais militares que realizam a tarefa de locomoção a pé durante as rondas nas ruas de Florianópolis, bem como sua influência nesta atividade. Selecionados por amostragem não-probabilística, casualsistemática por voluntariado, participaram 234 policiais militares. O instrumento utilizado foi um questionário misto com índice de clareza de 0,93, validade de 0,85 e fidedignidade de 0,95. De acordo com os resultados, a maioria dos policiais possui apenas um par de coturnos, permanecendo em média 11 horas diárias com este

  11. Fast timing discriminator

    International Nuclear Information System (INIS)

    Lo, C.C.

    1977-01-01

    The processing of pulses with very fast risetimes for timing purposes involves many problems because of the large equivalent bandwidths involved. For pulses with risetimes in the 150 ps range (and full widths at half maximum (FWHM) of 400 ps) bandwidths in excess of 1GHz are required. Furthermore, these very narrow pulses with current amplitudes as small as 1 mA carry very small charges ( -12 coulomb), therefore, requiring very sensitive trigger circuits. The difficulty increases when timing characteristics in the picosecond range are sought especially when a wide input signal amplitude range causes a time-walk problem. The fast timing discriminator described has a time-walk of approximately +-75 ps over the input signal range from 80 mV to 3V. A schematic of the discriminator is included, and operation and performance are discussed

  12. Fast radiographic systems

    International Nuclear Information System (INIS)

    Domanus, J.C.

    1984-08-01

    Industrial radiography can be performed with shorter exposure times, when instead of X-ray film with lead intensifying screens the radiographic paper with fluorescent screen is used. With paper radiography one can obtain lower material, equipment, and labor costs, shorter exposure and processing times, and easier radiation protection. The speed of the radiographic inspection can also be increased by the use of fluorometallic intensifying screens together with a special brand of X-ray film. Before accepting either of the two fast radiographic systems one must be sure that they can produce radiographs of adequate image quality. Therefore an investigation was performed on that subject using ISO wire IQI's and ASTM penetrameters. The radiographic image quality was tested for aluminium and steel up to 30 mm thick using various brands of radiographic paper and X-ray film with fluorometallic screens and comparing them with fast X-ray films with lead screens. Both systems give satisfactory results. (author)

  13. PHENIX Fast TOF

    Energy Technology Data Exchange (ETDEWEB)

    Soha, Aria [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Chiu, Mickey [Brookhaven National Lab. (BNL), Upton, NY (United States); Mannel, Eric [Brookhaven National Lab. (BNL), Upton, NY (United States); Stoll, Sean [Brookhaven National Lab. (BNL), Upton, NY (United States); Lynch, Don [Brookhaven National Lab. (BNL), Upton, NY (United States); Boose, Steve [Brookhaven National Lab. (BNL), Upton, NY (United States); Northacker, Dave [Brookhaven National Lab. (BNL), Upton, NY (United States); Alfred, Marcus [Howard Univ., Washington, DC (United States); Lindesay, James [Howard Univ., Washington, DC (United States); Chujo, Tatsuya [Univ. of Tsukuba (Japan); Inaba, Motoi [Univ. of Tsukuba (Japan); Nonaka, Toshihiro [Univ. of Tsukuba (Japan); Sato, Wataru [Univ. of Tsukuba (Japan); Sakatani, Ikumi [Univ. of Tsukuba (Japan); Hirano, Masahiro [Univ. of Tsukuba (Japan); Choi, Ihnjea [Univ. of Illinois, Urbana-Champaign, IL (United States)

    2014-01-15

    This is a technical scope of work (TSW) between the Fermi National Accelerator Laboratory (Fermilab) and the experimenters of PHENIX Fast TOF group who have committed to participate in beam tests to be carried out during the FY2014 Fermilab Test Beam Facility program. The goals for this test beam experiment are to verify the timing performance of the two types of time-of-flight detector prototypes.

  14. The Integral Fast Reactor

    International Nuclear Information System (INIS)

    Chang, Y.I.

    1988-01-01

    The Integral Fast Reactor (IFR) is an innovative liquid metal reactor concept being developed at Argonne National Laboratory. It seeks to specifically exploit the inherent properties of liquid metal cooling and metallic fuel in a way that leads to substantial improvements in the characteristics of the complete reactor system. This paper describes the key features and potential advantages of the IFR concept, with emphasis on its safety characteristics. 3 refs., 4 figs., 1 tab

  15. Fast Light Optical Gyroscopes

    Science.gov (United States)

    Smith, David D.

    2015-01-01

    Next-generation space missions are currently constrained by existing spacecraft navigation systems which are not fully autonomous. These systems suffer from accumulated dead-reckoning errors and must therefore rely on periodic corrections provided by supplementary technologies that depend on line-of-sight signals from Earth, satellites, or other celestial bodies for absolute attitude and position determination, which can be spoofed, incorrectly identified, occluded, obscured, attenuated, or insufficiently available. These dead-reckoning errors originate in the ring laser gyros themselves, which constitute inertial measurement units. Increasing the time for standalone spacecraft navigation therefore requires fundamental improvements in gyroscope technologies. One promising solution to enhance gyro sensitivity is to place an anomalous dispersion or fast light material inside the gyro cavity. The fast light essentially provides a positive feedback to the gyro response, resulting in a larger measured beat frequency for a given rotation rate as shown in figure 1. Game Changing Development has been investing in this idea through the Fast Light Optical Gyros (FLOG) project, a collaborative effort which began in FY 2013 between NASA Marshall Space Flight Center (MSFC), the U.S. Army Aviation and Missile Research, Development, and Engineering Center (AMRDEC), and Northwestern University. MSFC and AMRDEC are working on the development of a passive FLOG (PFLOG), while Northwestern is developing an active FLOG (AFLOG). The project has demonstrated new benchmarks in the state of the art for scale factor sensitivity enhancement. Recent results show cavity scale factor enhancements of approx.100 for passive cavities.

  16. ADT fast losses MD

    CERN Document Server

    Priebe, A; Dehning, B; Redaelli, S; Salvachua Ferrando, BM; Sapinski, M; Solfaroli Camillocci, M; Valuch, D

    2013-01-01

    The fast beam losses in the order of 1 ms are expected to be a potential major luminosity limitation for higher beam energies after the LHC long shutdown (LS1). Therefore a Quench Test is planned in the winter 2013 to estimate the quench limit in this timescale and revise the current models. This experiment was devoted to determination the LHC Transverse Damper (ADT) as a system for fast losses induction. A non-standard operation of the ADT was used to develop the beam oscillation instead of suppressing them. The sign flip method had allowed us to create the fast losses within several LHC turns at 450 GeV during the previous test (26th March 2012). Thus, the ADT could be potentially used for the studies of the UFO ("Unidentied Falling Object") impact on the cold magnets. Verification of the system capability and investigations of the disturbed beam properties were the main objectives of this MD. During the experiment, the pilot bunches of proton beam were excited independently in the horizontal and vertical ...

  17. Fast-scintillator measurements

    International Nuclear Information System (INIS)

    Graves, W.R.; Slaughter, D.R.; Lerche, R.A.

    1985-01-01

    The authors are investigating scintillators because their fast timing properties may be applied to the development of neutron diagnostics. Measuring the history of a target burn by direct observation of DT neutrons requires a time resolution of 20 ps. An instrument designed to measure the plasma ion temperature by neutron time of flight, when the flight path is less than or equal to 1m, requires a detector system with resolution of 60 to 100 ps. Fast plastic scintillators like NE111, BC-422, and SG180 typically have decay constants of about 1400 ps. With quenching, the decay constant can be decreased to about 700 ps - still to slow for the instruments that they would like to build. One yet-unexploited property of fast scintillators is their rise time. In 1984, they began experiments designed to measure scintillator rise times. For our application - the measurement of target burn histories - they are especially concerned with the temporal width of the sample excitation pulse, the temporal resolution of our measurement system, and the need to characterize the excitation pulse and the scintillator output simultaneously. Application of plastic scintillators to a neutron streak camera is described

  18. Metabolic Effects of Intermittent Fasting.

    Science.gov (United States)

    Patterson, Ruth E; Sears, Dorothy D

    2017-08-21

    The objective of this review is to provide an overview of intermittent fasting regimens, summarize the evidence on the health benefits of intermittent fasting, and discuss physiological mechanisms by which intermittent fasting might lead to improved health outcomes. A MEDLINE search was performed using PubMed and the terms "intermittent fasting," "fasting," "time-restricted feeding," and "food timing." Modified fasting regimens appear to promote weight loss and may improve metabolic health. Several lines of evidence also support the hypothesis that eating patterns that reduce or eliminate nighttime eating and prolong nightly fasting intervals may result in sustained improvements in human health. Intermittent fasting regimens are hypothesized to influence metabolic regulation via effects on (a) circadian biology, (b) the gut microbiome, and (c) modifiable lifestyle behaviors, such as sleep. If proven to be efficacious, these eating regimens offer promising nonpharmacological approaches to improving health at the population level, with multiple public health benefits.

  19. Neighborhood fast food availability and fast food consumption

    Science.gov (United States)

    Oexle, Nathalie; Barnes, Timothy L; Blake, Christine E; Bell, Bethany A; Liese, Angela D

    2015-01-01

    Recent nutritional and public health research has focused on how the availability of various types of food in a person’s immediate area or neighborhood influences his or her food choices and eating habits. It has been theorized that people living in areas with a wealth of unhealthy fast-food options may show higher levels of fast-food consumption, a factor that often coincides with being overweight or obese. However, measuring food availability in a particular area is difficult to achieve consistently: there may be differences in the strict physical locations of food options as compared to how individuals perceive their personal food availability, and various studies may use either one or both of these measures. The aim of this study was to evaluate the association between weekly fast-food consumption and both a person’s perceived availability of fast-food and an objective measure of fast-food presence—Geographic Information Systems (GIS)—within that person’s neighborhood. A randomly selected population-based sample of eight counties in South Carolina was used to conduct a cross-sectional telephone survey assessing self-report fast-food consumption and perceived availability of fast food. GIS was used to determine the actual number of fast-food outlets within each participant’s neighborhood. Using multinomial logistic regression analyses, we found that neither perceived availability nor GIS-based presence of fast-food was significantly associated with weekly fast-food consumption. Our findings indicate that availability might not be the dominant factor influencing fast-food consumption. We recommend using subjective availability measures and considering individual characteristics that could influence both perceived availability of fast food and its impact on fast-food consumption. If replicated, our findings suggest that interventions aimed at reducing fast-food consumption by limiting neighborhood fast-food availability might not be completely

  20. Neighborhood fast food availability and fast food consumption.

    Science.gov (United States)

    Oexle, Nathalie; Barnes, Timothy L; Blake, Christine E; Bell, Bethany A; Liese, Angela D

    2015-09-01

    Recent nutritional and public health research has focused on how the availability of various types of food in a person's immediate area or neighborhood influences his or her food choices and eating habits. It has been theorized that people living in areas with a wealth of unhealthy fast-food options may show higher levels of fast-food consumption, a factor that often coincides with being overweight or obese. However, measuring food availability in a particular area is difficult to achieve consistently: there may be differences in the strict physical locations of food options as compared to how individuals perceive their personal food availability, and various studies may use either one or both of these measures. The aim of this study was to evaluate the association between weekly fast-food consumption and both a person's perceived availability of fast-food and an objective measure of fast-food presence - Geographic Information Systems (GIS) - within that person's neighborhood. A randomly selected population-based sample of eight counties in South Carolina was used to conduct a cross-sectional telephone survey assessing self-report fast-food consumption and perceived availability of fast food. GIS was used to determine the actual number of fast-food outlets within each participant's neighborhood. Using multinomial logistic regression analyses, we found that neither perceived availability nor GIS-based presence of fast-food was significantly associated with weekly fast-food consumption. Our findings indicate that availability might not be the dominant factor influencing fast-food consumption. We recommend using subjective availability measures and considering individual characteristics that could influence both perceived availability of fast food and its impact on fast-food consumption. If replicated, our findings suggest that interventions aimed at reducing fast-food consumption by limiting neighborhood fast-food availability might not be completely effective

  1. Fast reactors: potential for power

    International Nuclear Information System (INIS)

    1983-02-01

    The subject is discussed as follows: basic facts about conventional and fast reactors; uranium economy; plutonium and fast reactors; cooling systems; sodium coolant; safety engineering; handling and recycling plutonium; safeguards; development of fast reactors in Britain and abroad; future progress. (U.K.)

  2. Hispanics in Fast Food Jobs.

    Science.gov (United States)

    Charner, Ivan; Fraser, Bryna Shore

    A study examined the employment of Hispanics in the fast-food industry. Data were obtained from a national survey of employees at 279 fast-food restaurants from seven companies in which 194 (4.2 percent) of the 4,660 respondents reported being Hispanic. Compared with the total sample, Hispanic fast-food employees were slightly less likely to be…

  3. The surface effect on axisymmetric wave propagation in piezoelectric cylindrical shells

    Directory of Open Access Journals (Sweden)

    Yunying Zhou

    2015-02-01

    Full Text Available Based on the surface piezoelectricity theory and first-order shear deformation theory, the surface effect on the axisymmetric wave propagating in piezoelectric cylindrical shells is analyzed. The Gurtin–Murdoch theory is utilized to get the nontraditional boundary conditions and constitutive equations of the surface, in company with classical governing equations of the bulk, from which the basic formulations are obtained. Numerical results show that the surface layer has a profound effect on wave characteristics in nanostructure at a higher mode.

  4. Timoshenko beam model for buckling of piezoelectric nanowires with surface effects

    Science.gov (United States)

    2012-01-01

    This paper investigates the buckling behavior of piezoelectric nanowires under distributed transverse loading, within the framework of the Timoshenko beam theory, and in the presence of surface effects. Analytical relations are given for the critical force of axial buckling of nanowires by accounting for the effects of surface elasticity, residual surface tension, and transverse shear deformation. Through an example, it is shown that the critical electric potential of buckling depends on both the surface stresses and piezoelectricity. This study may be helpful in the characterization of the mechanical properties of nanowires and in the calibration of the nanowire-based force sensors. PMID:22453063

  5. Modeling of surface effects in crystalline materials within the framework of gradient crystal plasticity

    Science.gov (United States)

    Peng, Xiang-Long; Husser, Edgar; Huang, Gan-Yun; Bargmann, Swantje

    2018-03-01

    A finite-deformation gradient crystal plasticity theory is developed, which takes into account the interaction between dislocations and surfaces. The model captures both energetic and dissipative effects for surfaces penetrable by dislocations. By taking advantage of the principle of virtual power, the surface microscopic boundary equations are obtained naturally. Surface equations govern surface yielding and hardening. A thin film under shear deformation serves as a benchmark problem for validation of the proposed model. It is found that both energetic and dissipative surface effects significantly affect the plastic behavior.

  6. The fast encryption package

    Science.gov (United States)

    Bishop, Matt

    1988-01-01

    The organization of some tools to help improve passwork security at a UNIX-based site is described along with how to install and use them. These tools and their associated library enable a site to force users to pick reasonably safe passwords (safe being site configurable) and to enable site management to try to crack existing passworks. The library contains various versions of a very fast implementation of the Data Encryption Standard and of the one-way encryption functions used to encryp the password.

  7. Simplified fast neutron dosimeter

    International Nuclear Information System (INIS)

    Sohrabi, M.

    1979-01-01

    Direct fast-neutron-induced recoil and alpha particle tracks in polycarbonate films may be enlarged for direct visual observation and automated counting procedures employing electrochemical etching techniques. Electrochemical etching is, for example, carried out in a 28% KOH solution at room temperature by applying a 2000 V peak-to-peak voltage at 1 kHz frequency. Such recoil particle amplification can be used for the detection of wide neutron dose ranges from 1 mrad to 1000 rads or higher, if desired. 5 claims

  8. Fast neutron dosimetry

    International Nuclear Information System (INIS)

    DeLuca, P.M. Jr.; Pearson, D.W.

    1992-01-01

    This progress report concentrates on two major areas of dosimetry research: measurement of fast neutron kerma factors for several elements for monochromatic and white spectrum neutron fields and determination of the response of thermoluminescent phosphors to various ultra-soft X-ray energies and beta-rays. Dr. Zhixin Zhou from the Shanghai Institute of Radiation Medicine, People's Republic of China brought with him special expertise in the fabrication and use of ultra-thin TLD materials. Such materials are not available in the USA. The rather unique properties of these materials were investigated during this grant period

  9. Fast breeder reactors

    International Nuclear Information System (INIS)

    Ollier, J.L.

    1987-01-01

    The first industrial-scale fast breeder reactor (FBR) is the Superphenix I at Crays-Melville. It was designed and built by Novatome, a French company, and Ansaldo, an Italian company. The advantages of FBRs are summarized. The status of Superphenix and the testing schedule is given. The stages in its power escalation in 1986 are given. The article is optimistic about the future for FBRs and expects FBRs to take over from PWRs at the beginning of the 21st Century. To achieve economic viability, European financial cooperation for the research and development programme is advocated. (UK)

  10. Fast quench reactor method

    Science.gov (United States)

    Detering, B.A.; Donaldson, A.D.; Fincke, J.R.; Kong, P.C.; Berry, R.A.

    1999-08-10

    A fast quench reaction includes a reactor chamber having a high temperature heating means such as a plasma torch at its inlet and a means of rapidly expanding a reactant stream, such as a restrictive convergent-divergent nozzle at its outlet end. Metal halide reactants are injected into the reactor chamber. Reducing gas is added at different stages in the process to form a desired end product and prevent back reactions. The resulting heated gaseous stream is then rapidly cooled by expansion of the gaseous stream. 8 figs.

  11. The integral fast reactor

    International Nuclear Information System (INIS)

    Till, C.E.

    1987-01-01

    On April 3rd, 1986, two demonstrations of the inherent capability of sodium-cooled fast reactors to survive unprotected loss of cooling accidents were carried out on the experimental sodium-cooled power reactor, EBR-II, on the Idaho site of Argonne National Laboratory. Transients potentially of the most serious kind, one an unprotected loss of flow, the other an unprotected loss of heat sink, both initiated from full power. In both cases the reactor quietly shut itself down, without damage of any kind. These tests were a part of the on-going development program at Argonne to develop an advanced reactor with significant new inherent safety characteristics. Called the integral fast reactor, or IFR, the basic thrust is to develop everything that is needed for a complete nuclear power system - reactor, closed fuel cycle, and waste processing - as a single optimized entity, and, for simplicity in concept, as an integral part of a single plant. The particular selection of reactor materials emphasizes inherent safety characteristics also makes possible a simplified close fuel cycle and waste process improvements. The paper describes the IFR concept, the inherent safety, tests, and status of IFR development today

  12. Biomass fast pyrolysis

    Directory of Open Access Journals (Sweden)

    Bridgewater Anthony V.

    2004-01-01

    Full Text Available Bioenergy is now accepted as having the potential to provide the major part of the projected renewable energy provisions of the future. Fast pyrolysis is one of the three main thermal routes, with gasification and combustion, to providing a useful and valuable biofuel. It is one of the most recent renewable energy processes to have been introduced and offers the advantages of a liquid product bio-oil that can be readily stored and trans ported, and used as a fuel, an energy carrier and a source of chemicals. Fast pyrolysis has now achieved commercial success for production of some chemicals, liquid fuel and electricity. Bio-oils have been success fully tested in engines turbines and boilers, and have been upgraded to high quality hydrocarbon fuels although at a presently unacceptable energetic and financial cost. This review concentrates on the technology of pyrolysis and applications for the liquid product. The basic pyrolysis process and the characteristics of the main liquid product bio-oil are first summarized followed by a review of applications for bio-oil. The main technical and non-technical barriers to implementation are identified.

  13. The integral fast reactor

    International Nuclear Information System (INIS)

    Till, C.E.

    1987-01-01

    On April 3rd, 1986, two dramatic demonstrations of the inherent capability of sodium-cooled fast reactors to survive unprotected loss of cooling accidents were carried out on the experimental sodium-cooled power reactor, EBR-II, on the Idaho site of Argonne National Laboratory. Transients potentially of the most serious kind, one an unprotected loss of flow, the other an unprotected loss of heat sink, both initiated from full power. In both cases the reactor quietly shut itself down, without damage of any kind. These tests were a part of the on-going development program at Argonne to develop an advanced reactor with significant new inherent safety characteristics. Called the Integral Fast Reactor, or IFR, the basic thrust is to develop everything that is needed for a complete nuclear power system - reactor, closed fuel cycle, and waste processing - as a single optimized entity, and, for simplicity in concept, as an integral part of a single plant. The particular selection of reactor materials emphasizes inherent safety characteristics and also makes possible a simplified closed fuel cycle and waste process improvements

  14. Chemistry of fast electrons.

    Science.gov (United States)

    Maximoff, Sergey N; Head-Gordon, Martin P

    2009-07-14

    A chemicurrent is a flux of fast (kinetic energy approximately > 0.5-1.3 eV) metal electrons caused by moderately exothermic (1-3 eV) chemical reactions over high work function (4-6 eV) metal surfaces. In this report, the relation between chemicurrent and surface chemistry is elucidated with a combination of top-down phenomenology and bottom-up atomic-scale modeling. Examination of catalytic CO oxidation, an example which exhibits a chemicurrent, reveals 3 constituents of this relation: The localization of some conduction electrons to the surface via a reduction reaction, 0.5 O(2) + deltae(-) --> O(delta(-)) (Red); the delocalization of some surface electrons into a conduction band in an oxidation reaction, O(delta(-)) + CO --> CO(2)(delta-) --> CO(2) + deltae(-) (Ox); and relaxation without charge transfer (Rel). Juxtaposition of Red, Ox, and Rel produces a daunting variety of metal electronic excitations, but only those that originate from CO(2) reactive desorption are long-range and fast enough to dominate the chemicurrent. The chemicurrent yield depends on the universality class of the desorption process and the distribution of the desorption thresholds. This analysis implies a power-law relation with exponent 2.66 between the chemicurrent and the heat of adsorption, which is consistent with experimental findings for a range of systems. This picture also applies to other oxidation-reduction reactions over high work function metal surfaces.

  15. Explicit frequency equations of free vibration of a nonlocal Timoshenko beam with surface effects

    Science.gov (United States)

    Zhao, Hai-Sheng; Zhang, Yao; Lie, Seng-Tjhen

    2018-02-01

    Considerations of nonlocal elasticity and surface effects in micro- and nanoscale beams are both important for the accurate prediction of natural frequency. In this study, the governing equation of a nonlocal Timoshenko beam with surface effects is established by taking into account three types of boundary conditions: hinged-hinged, clamped-clamped and clamped-hinged ends. For a hinged-hinged beam, an exact and explicit natural frequency equation is obtained. However, for clamped-clamped and clamped-hinged beams, the solutions of corresponding frequency equations must be determined numerically due to their transcendental nature. Hence, the Fredholm integral equation approach coupled with a curve fitting method is employed to derive the approximate fundamental frequency equations, which can predict the frequency values with high accuracy. In short, explicit frequency equations of the Timoshenko beam for three types of boundary conditions are proposed to exhibit directly the dependence of the natural frequency on the nonlocal elasticity, surface elasticity, residual surface stress, shear deformation and rotatory inertia, avoiding the complicated numerical computation.

  16. Islamic fasting and multiple sclerosis

    Science.gov (United States)

    2014-01-01

    Background Month-long daytime Ramadan fasting pose s major challenges to multiple sclerosis (MS) patients in Muslim countries. Physicians should have practical knowledge on the implications of fasting on MS. We present a summary of database searches (Cochrane Database of Systematic Reviews, PubMed) and a mini-symposium on Ramadan fasting and MS. In this symposium, we aimed to review the effect of fasting on MS and suggest practical guidelines on management. Discussion In general, fasting is possible for most stable patients. Appropriate amendment of drug regimens, careful monitoring of symptoms, as well as providing patients with available evidence on fasting and MS are important parts of management. Evidence from experimental studies suggests that calorie restriction before disease induction reduces inflammation and subsequent demyelination and attenuates disease severity. Fasting does not appear to have unfavorable effects on disease course in patients with mild disability (Expanded Disability Status Scale (EDSS) score ≤3). Most experts believed that during fasting (especially in summer), some MS symptoms (fatigue, fatigue perception, dizziness, spasticity, cognitive problems, weakness, vision, balance, gait) might worsen but return to normal levels during feasting. There was a general consensus that fasting is not safe for patients: on high doses of anti-convulsants, anti-spastics, and corticosteroids; with coagulopathy or active disease; during attacks; with EDSS score ≥7. Summary These data suggest that MS patients should have tailored care. Fasting in MS patients is a challenge that is directly associated with the spiritual belief of the patient. PMID:24655543

  17. Ramadan fasting, pregnancy and lactation

    Directory of Open Access Journals (Sweden)

    Mohsen Khoshniat Nikoo

    2014-04-01

    Full Text Available Background: Fasting and malnutrition during pregnancy is associated with deleterious consequences such as hypoglycemia, ketonemia, impaired fetal IQ, low birth weight and even abortion. Comparison of pregnancy length and year duration shows that about 75% of pregnancies coincided with Ramadan. Also, fasting during Ramadan is not equivalent to hunger and malnutrition, however, knowledge of the effects of Ramadan fasting on pregnancy outcome is important. In this review, the results of all studies related to the possible effects of Ramadan fasting in pregnancy and lactation have been collected. Material and Methods: Keywords such as "Ramadan", "Ramadan Fasting", "Islamic Fasting", "Fasting in Ramadan "and Fasting with words Pregnancy, Birth Weight, Lactation, Preterm, Milk Composition, Breast Milk were searched in PubMed Database, SID (Scientific Information Database, and some regional journals and 40 related articles (descriptive cross - sectional, cohort, clinical trial and review articles from 1968 to 2010 were studied. Results: Based on available information, if the maternal nutrition during Ramadan is good, the normal process of pregnancy will be maintained and Ramadan fasting would not have deleterious effects on fetal physical and mental growth. Conclusion: Considering nutritional tips, nursing mothers could also fast during Ramadan.

  18. Fast Food Jobs. National Study of Fast Food Employment.

    Science.gov (United States)

    Charner, Ivan; Fraser, Bryna Shore

    A study examined employment in the fast-food industry. The national survey collected data from employees at 279 fast-food restaurants from seven companies. Female employees outnumbered males by two to one. The ages of those fast-food employees in the survey sample ranged from 14 to 71, with fully 70 percent being in the 16- to 20-year-old age…

  19. Test fast kicker pulser

    International Nuclear Information System (INIS)

    Zhang, W.; Soukas, A.V.; Zhanf, S.Y.; Frey, W.W.; Bunicci, J.

    1989-01-01

    In this paper, a test pulser of the Brookhaven AGS Booster extraction fast kicker is described. The pulser is projected for both proton and heavy ion operation. A load of total inductance 2.15 μH is used for the test pulser. The PFN voltage is required to be below 40 kV for operation in air. Rise time of the pulse for proton extraction operation is about 120ns up to 97% of full current (1000A), and, for heavy ion extraction, 160ns up to 98% of full current (1615A). R-C compensation networks are used for pulse front edge sharpening. The flexibility of operation is obtained basically by switching an energy dumping resistor to match or mismatch the PFN impedance. Some comments on stray capacitance and stray inductance effects are included. 3 refs., 10 figs., 2 tabs

  20. Fast ion atomic spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Berry, H.G.; Young, L.; Goodman, L.S.; Somerville, L.P.; Hardis, J.; Neek, D.

    1984-01-01

    We have set up two collinear fast beam/laser excitation systems, one at the Argonne Dynamitron Accelerator (0.5 to 5.0 MeV beam energy) and another at a small electrostatic accelerator (20 to 130 keV). Our objective is to study fine structure, hyperfine structure and QED effects in ions of a few electrons. Initial projects underway include studies of multi-excited transitions in Li/sup -/ and Li/sup 0/, and transitions to high Rydberg states in H/sup 0/ and He/sup 0/. We have simultaneously excited a sodium jet with a laser at the resonance wavelength (D/sub 1/ or D/sub 2/ lines) and a 1-MeV He/sup +/ beam to produce excitation to autoionizing Na and Na/sup +/ states. The Auger electron spectra are compared to spectra obtained without laser excitation, and indicate strong variations in final state populations. 17 references.

  1. Fast-neutron reactor

    International Nuclear Information System (INIS)

    Iljunin, V.G.; Murogov, V.M.; Shmelev, A.N.

    1974-01-01

    A description is given of a fast-neutron reactor wherein the core and the surrounding lateral and axial blankets are made up of fuel element stacks. The walls of each stack have holes in the middle portion thereof with respect to the height of the core. Main and additional fuel elements are arranged respectively above and below the plane passing through the centers ofthe holes, inside each stack, the spacing between which fuel elements form, together with the holes, the inlet header of the coolant washing the fuel elements. The inlet header splits the coolant into two oppositely directed flows lead away by two outlet headers arranged above and below the upper and lower axial blankets

  2. Fast reactor programme

    International Nuclear Information System (INIS)

    Hoekstra, E.K.

    1976-11-01

    Estimated reactivity effects of fission products in the SNR-300 fast breeder are given. Neutron cross sections of 127 I and 129 I are also given. Results of the in-pile canning failure experiments on fuel pins R54-F35 and F39 are discussed. Sinter experiments using mixed UC-UN powders are reported. Results of tensile tests on high-dose and low-dose irradiated specimens of 18Cr1 1Ni stainless steel (DIN 1.4948) used in the SNR-300 reactor vessel are given. It is shown that the aerosol behaviour in condensing sodium vapour can be described by the same MADCA model developed for the decay of aerosols in condensing water vapour. Results of heat transfer measurements in the electrically heated 28-rod bundle under liquid-phase and subsequently under two-phase conditions are commented on

  3. The Integral Fast Reactor

    International Nuclear Information System (INIS)

    Till, C.E.

    1985-01-01

    During the past two years, scientists from Argonne have developed an advanced breeder reactor with a closed self contained fuel cycle. The Integral Fast Reactor (IFR) is a new reactor concept, adaptable to a variety of designs, that is based on a fuel cycle radically different from the CRBR line of breeder development. The essential features of the IFR are metal fuel, pool layout, and pyro- and electro-reprocessing in a facility integral with the reactor plant. The IFR shows promise to provide an inexhaustible, safe, economic, environmentally acceptable, and diversion resistant source of nuclear power. It shows potential for major improvement in all of the areas that have led to concern about nuclear power

  4. Fast multilevel radiative transfer

    International Nuclear Information System (INIS)

    Paletou, Frederic; Leger, Ludovick

    2007-01-01

    The vast majority of recent advances in the field of numerical radiative transfer relies on approximate operator methods better known in astrophysics as Accelerated Lambda-Iteration (ALI). A superior class of iterative schemes, in term of rates of convergence, such as Gauss-Seidel and successive overrelaxation methods were therefore quite naturally introduced in the field of radiative transfer by Trujillo Bueno and Fabiani Bendicho [A novel iterative scheme for the very fast and accurate solution of non-LTE radiative transfer problems. Astrophys J 1995;455:646]; it was thoroughly described for the non-LTE two-level atom case. We describe hereafter in details how such methods can be generalized when dealing with non-LTE unpolarised radiation transfer with multilevel atomic models, in monodimensional geometry

  5. FAST NEUTRON SPECTROMETER

    Science.gov (United States)

    Davis, F.J.; Hurst, G.S.; Reinhardt, P.W.

    1959-08-18

    An improved proton recoil spectrometer for determining the energy spectrum of a fast neutron beam is described. Instead of discriminating against and thereby"throwing away" the many recoil protons other than those traveling parallel to the neutron beam axis as do conventional spectrometers, this device utilizes protons scattered over a very wide solid angle. An ovoidal gas-filled recoil chamber is coated on the inside with a scintillator. The ovoidal shape of the sensitive portion of the wall defining the chamber conforms to the envelope of the range of the proton recoils from the radiator disposed within the chamber. A photomultiplier monitors the output of the scintillator, and a counter counts the pulses caused by protons of energy just sufficient to reach the scintillator.

  6. Fast mixed spectrum reactor concept

    International Nuclear Information System (INIS)

    Kouts, H.J.C.; Fischer, G.J.; Cerbone, R.J.

    1979-04-01

    The Fast Mixed Spectrum Reactor is a highly promising concept for a fast reactor with improved features of proliferation resistance, and excellent utilization of uranium resources. In technology, it can be considered to be a branch of fast breeder development, though its operation and implications are different from those of FBR'S in important respects. Successful development programs are required in several areas to bring FMSR to reality, but the payoff from a successful program can be high

  7. Promotion and Fast Food Demand

    OpenAIRE

    Timothy J. Richards; Luis Padilla

    2009-01-01

    Many believe that fast food promotion is a significant cause of the obesity epidemic in North America. Industry members argue that promotion only reallocates brand shares and does not increase overall demand. We study the effect of fast food promotion on market share and total demand by estimating a discrete / continuous model of fast food restaurant choice and food expenditure that explicitly accounts for both spatial and temporal determinants of demand. Estimates are obtained using a unique...

  8. Surface effects of electrode-dependent switching behavior of resistive random-access memory

    KAUST Repository

    Ke, Jr Jian

    2016-09-26

    The surface effects of ZnO-based resistive random-access memory (ReRAM) were investigated using various electrodes. Pt electrodes were found to have better performance in terms of the device\\'s switching functionality. A thermodynamic model of the oxygen chemisorption process was proposed to explain this electrode-dependent switching behavior. The temperature-dependent switching voltage demonstrates that the ReRAM devices fabricated with Pt electrodes have a lower activation energy for the chemisorption process, resulting in a better resistive switching performance. These findings provide an in-depth understanding of electrode-dependent switching behaviors and can serve as design guidelines for future ReRAM devices.

  9. First Principles Calculations of Transition Metal Binary Alloys: Phase Stability and Surface Effects

    Science.gov (United States)

    Aspera, Susan Meñez; Arevalo, Ryan Lacdao; Shimizu, Koji; Kishida, Ryo; Kojima, Kazuki; Linh, Nguyen Hoang; Nakanishi, Hiroshi; Kasai, Hideaki

    2017-06-01

    The phase stability and surface effects on binary transition metal nano-alloy systems were investigated using density functional theory-based first principles calculations. In this study, we evaluated the cohesive and alloying energies of six binary metal alloy bulk systems that sample each type of alloys according to miscibility, i.e., Au-Ag and Pd-Ag for the solid solution-type alloys (SS), Pd-Ir and Pd-Rh for the high-temperature solid solution-type alloys (HTSS), and Au-Ir and Ag-Rh for the phase-separation (PS)-type alloys. Our results and analysis show consistency with experimental observations on the type of materials in the bulk phase. Varying the lattice parameter was also shown to have an effect on the stability of the bulk mixed alloy system. It was observed, particularly for the PS- and HTSS-type materials, that mixing gains energy from the increasing lattice constant. We furthermore evaluated the surface effects, which is an important factor to consider for nanoparticle-sized alloys, through analysis of the (001) and (111) surface facets. We found that the stability of the surface depends on the optimization of atomic positions and segregation of atoms near/at the surface, particularly for the HTSS and the PS types of metal alloys. Furthermore, the increase in energy for mixing atoms at the interface of the atomic boundaries of PS- and HTSS-type materials is low enough to overcome by the gain in energy through entropy. These, therefore, are the main proponents for the possibility of mixing alloys near the surface.

  10. Fast pitch softball injuries.

    Science.gov (United States)

    Meyers, M C; Brown, B R; Bloom, J A

    2001-01-01

    The popularity of fast pitch softball in the US and throughout the world is well documented. Along with this popularity, there has been a concomitant increase in the number of injuries. Nearly 52% of cases qualify as major disabling injuries requiring 3 weeks or more of treatment and 2% require surgery. Interestingly, 75% of injuries occur during away games and approximately 31% of traumas occur during nonpositional and conditioning drills. Injuries range from contusions and tendinitis to ligamentous disorders and fractures. Although head and neck traumas account for 4 to 12% of cases, upper extremity traumas account for 23 to 47% of all injuries and up to 19% of cases involve the knee. Approximately 34 to 42% of injuries occur when the athlete collides with another individual or object. Other factors involved include the quality of playing surface, athlete's age and experience level, and the excessive physical demands associated with the sport. Nearly 24% of injuries involve base running and are due to poor judgement, sliding technique, current stationary base design, unorthodox joint and extremity position during ground impact and catching of cleats. The increasing prevalence of overtraining syndrome among athletes has been attributed to an unclear definition of an optimal training zone, poor communication between player and coach, and the limited ability of bone and connective tissue to quickly respond to match the demands of the sport. This has led routinely to arm, shoulder and lumbar instability, chronic nonsteroidal anti-inflammatory drug (NSAID) use and time loss injuries in 45% of pitching staff during a single season. Specific attention to a safer playing environment, coaching and player education, and sport-specific training and conditioning would reduce the risk, rate and severity of fast pitch traumas. Padding of walls, backstops, rails and dugout areas, as well as minimising use of indoor facilities, is suggested to decrease the number of collision

  11. Fast reactor programme

    International Nuclear Information System (INIS)

    Hoekstra, E.K.

    1978-05-01

    Fast neutron capture cross section data of natural Mo are presented; a feasibility study on integral neutron spectrum measurements in the low-energy region of large LMFBR's is discussed. The post-irradiation examination results of the fuel pin of loss-of-cooling experiment R63-L18 and the progress made with preparations for the HFR-TOP transient overpower experiments on fuel pins under irradiation in the pool-side facility of the HFR are reported on. An exact determination of the thermochemical properties of uranyl halides is discussed. Results of mechanical tests on stainless steel DIN 1.4948 specimens are given. Aerosol leakages through blocks of concrete are determined. In the field of heat transfer and hydraulics, data on fully-developed turbulent flows in rod bundles have been obtained using the code VITESSE, results of Laser Doppler Anemometer measurements performed on water flowing through a square channel are given and progress is reported on the study of local boiling occurring behind a flow blockage in a 28-rod bundle. (Auth.)

  12. The ATLAS Fast Tracker

    CERN Document Server

    Volpi, Guido; The ATLAS collaboration

    2015-01-01

    The use of tracking information at the trigger level in the LHC Run II period is crucial for the trigger an data acquisition (TDAQ) system. The tracking precision is in fact important to identify specific decay products of the Higgs boson or new phenomena, a well as to distinguish the contributions coming from many contemporary collisions that occur at every bunch crossing. However, the track reconstruction is among the most demanding tasks performed by the TDAQ computing farm; in fact, full reconstruction at full Level-1 trigger accept rate (100 KHz) is not possible. In order to overcome this limitation, the ATLAS experiment is planning the installation of a specific processor: the Fast Tracker (FTK), which is aimed at achieving this goal. The FTK is a pipeline of high performance electronic, based on custom and commercial devices, which is expected to reconstruct, with high resolution, the trajectories of charged tracks with a transverse momentum above 1 GeV, using the ATLAS inner tracker information. Patte...

  13. Fast ignition breakeven scaling

    International Nuclear Information System (INIS)

    Slutz, Stephen A.; Vesey, Roger Alan

    2005-01-01

    A series of numerical simulations have been performed to determine scaling laws for fast ignition break even of a hot spot formed by energetic particles created by a short pulse laser. Hot spot break even is defined to be when the fusion yield is equal to the total energy deposited in the hot spot through both the initial compression and the subsequent heating. In these simulations, only a small portion of a previously compressed mass of deuterium-tritium fuel is heated on a short time scale, i.e., the hot spot is tamped by the cold dense fuel which surrounds it. The hot spot tamping reduces the minimum energy required to obtain break even as compared to the situation where the entire fuel mass is heated, as was assumed in a previous study [S. A. Slutz, R. A. Vesey, I. Shoemaker, T. A. Mehlhorn, and K. Cochrane, Phys. Plasmas 7, 3483 (2004)]. The minimum energy required to obtain hot spot break even is given approximately by the scaling law E T = 7.5(ρ/100) -1.87 kJ for tamped hot spots, as compared to the previously reported scaling of E UT = 15.3(ρ/100) -1.5 kJ for untamped hotspots. The size of the compressed fuel mass and the focusability of the particles generated by the short pulse laser determines which scaling law to use for an experiment designed to achieve hot spot break even

  14. Fast Aerial Video Stitching

    Directory of Open Access Journals (Sweden)

    Jing Li

    2014-10-01

    Full Text Available The highly efficient and robust stitching of aerial video captured by unmanned aerial vehicles (UAVs is a challenging problem in the field of robot vision. Existing commercial image stitching systems have seen success with offline stitching tasks, but they cannot guarantee high-speed performance when dealing with online aerial video sequences. In this paper, we present a novel system which has an unique ability to stitch high-frame rate aerial video at a speed of 150 frames per second (FPS. In addition, rather than using a high-speed vision platform such as FPGA or CUDA, our system is running on a normal personal computer. To achieve this, after the careful comparison of the existing invariant features, we choose the FAST corner and binary descriptor for efficient feature extraction and representation, and present a spatial and temporal coherent filter to fuse the UAV motion information into the feature matching. The proposed filter can remove the majority of feature correspondence outliers and significantly increase the speed of robust feature matching by up to 20 times. To achieve a balance between robustness and efficiency, a dynamic key frame-based stitching framework is used to reduce the accumulation errors. Extensive experiments on challenging UAV datasets demonstrate that our approach can break through the speed limitation and generate an accurate stitching image for aerial video stitching tasks.

  15. Fast convolutions meet Montgomery

    Science.gov (United States)

    Mihailescu, Preda

    2008-06-01

    Arithmetic in large ring and field extensions is an important problem of symbolic computation, and it consists essentially of the combination of one multiplication and one division in the underlying ring. Methods are known for replacing one division by two short multiplications in the underlying ring, which can be performed essentially by using convolutions. However, while using school-book multiplication, modular multiplication may be grouped into 2 mathsf{M}(mathbf{R}) operations (where mathsf{M}(mathbf{R}) denotes the number of operations of one multiplication in the underlying ring), the short multiplication problem is an important obstruction to convolution. It raises the costs in that case to 3 mathsf{M}(mathbf{R}) . In this paper we give a method for understanding and bypassing this problem, thus reducing the costs of ring arithmetic to roughly 2mathsf{M}(mathbf{R}) when also using fast convolutions. The algorithms have been implemented with results which fit well the theoretical prediction and which shall be presented in a separate paper.

  16. Fast breeder fuel cycle

    International Nuclear Information System (INIS)

    1978-07-01

    This contribution is prepared for the answer to the questionnaire of working group 5, subgroup B. B.1. is the short review of the fast breeder fuel cycles based on the reference large commercial Japanese LMFBR. The LMFBRs are devided into two types. FBR-A is the reactor to be used before 2000, and its burnup and breeding ratio are relatively low. The reference fuel cycle requirement is calculated based on the FBR-A. FBR-B is the one to be used after 2000, and its burnup and breeding ratio are relatively high. B.2. is basic FBR fuel reprocessing scheme emphasizing the differences with LWR reprocessing. This scheme is based on the conceptual design and research and development work on the small scale LMFBR reprocessing facility of Japan. The facility adopts a conventional PUREX process except head end portions. The report also describes the effects of technical modifications of conventional reprocessing flow sheets, and the problems to be solved before the adoption of these alternatives

  17. Fast reactor programme in India

    Indian Academy of Sciences (India)

    2015-09-04

    Sep 4, 2015 ... The FBR programme since 1985 till 2030 is highlighted focussing on the current status and future direction of fast breeder test reactor (FBTR), prototype fast breeder reactor (PFBR) and FBR-1 and 2. Design and technological challenges of PFBR and design and safety targets with means to achieve the ...

  18. Oil Analysis by Fast DSC

    NARCIS (Netherlands)

    Wetten, I.A.; Herwaarden, A.W.; Splinter, R.; Ruth, van S.M.

    2014-01-01

    Thermal analysis of Olive and Sunflower Oil is done by Fast DSC to evaluate its potential to replace DSC for adulteration detection. DSC measurements take hours, Fast DSC minutes. Peak temperatures of the crystallisation peak in cooling for different Olive and Sunflower Oils are both comparable to

  19. Fasting and nonfasting lipid levels

    DEFF Research Database (Denmark)

    Langsted, Anne; Freiberg, Jacob J; Nordestgaard, Børge G

    2008-01-01

    Lipid profiles are usually measured after fasting. We tested the hypotheses that these levels change only minimally in response to normal food intake and that nonfasting levels predict cardiovascular events.......Lipid profiles are usually measured after fasting. We tested the hypotheses that these levels change only minimally in response to normal food intake and that nonfasting levels predict cardiovascular events....

  20. Confinement and surface effects on the physical properties of rhombohedral-shape hematite (α-Fe{sub 2}O{sub 3}) nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Luna, Carlos, E-mail: carlos.lunacd@uanl.edu.mx [Universidad Autónoma de Nuevo León (UANL), Av. Universidad S/N, San Nicolás de los Garza, Nuevo León 66455 (Mexico); Cuan-Guerra, Aída D. [Universidad Autónoma de Nuevo León (UANL), Av. Universidad S/N, San Nicolás de los Garza, Nuevo León 66455 (Mexico); Barriga-Castro, Enrique D. [Centro de Investigación en Química Aplicada (CIQA), Blvd. Enrique Reyna Hermosillo No. 140, Saltillo, 25294 Coahuila (Mexico); Núñez, Nuria O. [Instituto de Ciencia de Materiales de Sevilla (ICMS), CSIC-US, Avda. Americo Vespucio n° 49, Isla de la Cartuja, 41092 Sevilla (Spain); Mendoza-Reséndez, Raquel [Universidad Autónoma de Nuevo León (UANL), Av. Universidad S/N, San Nicolás de los Garza, Nuevo León 66455 (Mexico)

    2016-08-15

    Highlights: • Uniform rhombohedral hematite nanocrystals (RHNCs) have been obtained. • A detailed formation mechanism of these HNCS has been proposed. • Phonon confinement effects were revealed in the RHNCS vibrational bands. • Quantum confinement effects on the optical and electronic properties were found. - Abstract: Morphological, microstructural and vibrational properties of hematite (α-Fe{sub 2}O{sub 3}) nanocrystals with a rhombohedral shape and rounded edges, obtained by forced hydrolysis of iron(III) solutions under a fast nucleation, have been investigated in detail as a function of aging time. These studies allowed us to propose a detailed formation mechanism and revealed that these nanocrystals are composed of four {104} side facets, two {110} faces at the edges of the long diagonal of the nanocrystals and two {−441} facets as the top and bottom faces. Also, the presence of nanoscopic pores and fissures was evidenced. The vibrational bands of such nanocrystals were shifted to lower frequencies in comparison with bulk hematite ones as the nanocrystal size was reduced due to phonon confinement effects. Also, the indirect and direct transition band gaps displayed interesting dependences on the aging time arising from quantum confinement and surface effects.

  1. Fast-prototyping of VLSI

    International Nuclear Information System (INIS)

    Saucier, G.; Read, E.

    1987-01-01

    Fast-prototyping will be a reality in the very near future if both straightforward design methods and fast manufacturing facilities are available. This book focuses, first, on the motivation for fast-prototyping. Economic aspects and market considerations are analysed by European and Japanese companies. In the second chapter, new design methods are identified, mainly for full custom circuits. Of course, silicon compilers play a key role and the introduction of artificial intelligence techniques sheds a new light on the subject. At present, fast-prototyping on gate arrays or on standard cells is the most conventional technique and the third chapter updates the state-of-the art in this area. The fourth chapter concentrates specifically on the e-beam direct-writing for submicron IC technologies. In the fifth chapter, a strategic point in fast-prototyping, namely the test problem is addressed. The design for testability and the interface to the test equipment are mandatory to fulfill the test requirement for fast-prototyping. Finally, the last chapter deals with the subject of education when many people complain about the lack of use of fast-prototyping in higher education for VLSI

  2. A theoretical investigation of the influence of the surface effect on the ferroelectric property of strained barium titanate film

    Science.gov (United States)

    Fang, Chao; Liu, Wei Hua

    2017-07-01

    The influence of the surface effect on the ferroelectric property of strained barium titanate film has been investigated. In this study, based on time-dependent Ginsburg-Landau-Devonshire thermodynamic theory, the surface effects have been simulated by introducing a surface constant, which leads to the strained BaTiO3 film consisting of inner tetragonal core and gradient lattice strain layer. Further, surface effects produce a depolarization field which has a dominant effect on the ferroelectric properties of the films. The spontaneous polarization, dielectric properties and ferroelectric hysteresis loop of BaTiO3 film are calculated under different boundary conditions. Theoretical and experimental results for strained BaTiO3 film are compared and discussed.

  3. Fast novel nonlinear optical NLC system with local response

    Science.gov (United States)

    Iljin, Andrey; Residori, Stefania; Bortolozzo, Umberto

    2017-06-01

    Nonlinear optical performance of a novel liquid crystalline (LC) cell has been studied in two-wave mixing experiments revealing high diffraction efficiency within extremely wide intensity range, fast recording times and spatial resolution. Photo-induced modulation of the LC order parameter resulting from trans-cis isomerisation of dye molecules causes consequent changes of refractive indices of the medium (Light-Induced Order Modification, LIOM-mechanism) and is proved to be the main mechanism of optical nonlinearity. The proposed arrangement of the electric-field-stabilised homeotropic alignment hinders the LC director reorientation, prevents appearance of surface effects and ensures the optical cell quality. The LIOM-type nonlinearity, characterised with the substantially local nonlinear optical response, could also be extended for the recording of arbitrary phase profiles as requested in several applications for light-beam manipulation, recording of dynamic volume holograms and photonic lattices.

  4. An analytical model of a broadband magnetic energy nanoharvester array with consideration of flexoelectricity and surface effect

    Science.gov (United States)

    Wang, Wenjun; Li, Peng; Jin, Feng

    2018-04-01

    Based on Hamilton’s principle and Mindlin plate theory, a series of 2D equations to describe the mechanical behaviors of magneto-electro-elastic (MEE) laminated nanoplates, is established for the first time with consideration of flexoelectricity and surface effect. The equations derived are general, which not only can be reduced to the corresponding piezoelectric, piezomagnetic, and elastic cases, but can also be degenerated to the classical higher-order plate theory of conventional macroscopic MEE laminates if flexoelectricity and surface effect are neglected. As the typical application, a flexoelectric magnetic energy nanoharvester array with surface effect, consisting of a giant magnetostrictive material Terfenol-D with a nonlinear magneto-thermo-mechanical coupling constitutive relation and a linear piezoelectric layer PZT-4, is investigated systematically under coupled extensional and flexural deformations. After the correctness is confirmed, an important performance index (i.e. output current) of the harvester is discussed for different conditions, including flexoelectricity, surface effect, and nonlinear magneto-mechanical coupling. It has been revealed that flexoelectricity, surface effect, external magnetic field, and pre-stress can dramatically improve the performance of characteristics such as resonant frequencies, bandwidth, and output current of the nanoharvester. Especially, a critical thickness corresponding to the flexoelectricity or surface effect is proposed, below which the size-dependent effect is obvious and must be considered. The current work can be viewed as an innovative theoretical tool for evaluating the size-dependent and nonlinear characteristics qualitatively and quantitatively, which is essential and crucial to understanding the physical and mechanical properties of MEE nanostructures.

  5. Dynamic stability of functionally graded nanobeam based on nonlocal Timoshenko theory considering surface effects

    Science.gov (United States)

    Saffari, Shahab; Hashemian, Mohammad; Toghraie, Davood

    2017-09-01

    Based on nonlocal Timoshenko beam theory, dynamic stability of functionally graded (FG) nanobeam under axial and thermal loading was investigated. Surface stress effects were implemented according to Gurtin-Murdoch continuum theory. Using power law distribution for FGM and von Karman geometric nonlinearity, governing equations were derived based on Hamilton's principle. The developed nonlocal models have the capability of interpreting small scale effects. Pasternak elastic medium was employed to represent the interaction of the FG nanobeam and the surrounding elastic medium. A parametric study was conducted to focus influences of the static load factor, temperature change, gradient index, nonlocal parameter, slenderness ratio, surface effect and springs constants of the elastic medium on the dynamic instability region (DIR) of the FG beam with simply-supported boundary conditions. It was found that differences between DIRs predicted by local and nonlocal beam theories are significant for beams with lower aspect ratio. Moreover, it was observed that in contrast to high temperature environments, at low temperatures, increasing the temperature change moves the origin of the DIR to higher excitation frequency zone and leads to further stability. Considering surface stress effects shifts the DIR of FG beam to higher frequency zone, also increasing the gradient index enhances the frequency of DIR.

  6. Fast discriminative latent Dirichlet allocation

    Data.gov (United States)

    National Aeronautics and Space Administration — This is the code for fast discriminative latent Dirichlet allocation, which is an algorithm for topic modeling and text classification. The related paper is at...

  7. The price of fast fashion

    Science.gov (United States)

    2018-01-01

    The fashion industry has changed rapidly in recent years with the increased prevalence of fast fashion, impacting the environment. Efforts to green this polluting industry require action from businesses and consumers.

  8. Fast reactor programme in India

    Indian Academy of Sciences (India)

    2015-09-04

    economic via- bility of sodium fast reactor (SFR) for the commercial deployment in series. Further, demonstration of comprehensive closed fuel cycle technologies such as fuel fabrication, reprocessing, waste management and waste ...

  9. Fast neutron spectrometry and dosimetry

    International Nuclear Information System (INIS)

    Blaize, S.; Ailloud, J.; Mariani, J.; Millot, J.P.

    1958-01-01

    We have studied fast neutron spectrometry and dosimetry through the recoil protons they produce in hydrogenated samples. In spectrometric, we used nuclear emulsions, in dosimetric, we used polyethylene coated with zinc sulphide and placed before a photomultiplier. (author) [fr

  10. Allegheny County Fast Food Establishments

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — The Allegheny County Health Department has generated this list of fast food restaurants by exporting all chain restaurants without an alcohol permit from the...

  11. FastStats: Adolescent Health

    Science.gov (United States)

    ... Youth Aged 12–15, 2012 Caloric Intake From Fast Food Among Children and Adolescents: United States, 2011–2012 Use of Selected Nonmedication Mental Health Services by Adolescent Boys and Girls With Serious ...

  12. Fast Food: Tips for Choosing Healthier Options

    Science.gov (United States)

    ... make wise meal choices when going to a fast-food restaurant. By Mayo Clinic Staff Does following a ... or healthy diet mean you must swear off fast food? Not necessarily. An occasional stop for fast food ...

  13. Glycogenolysis in the fasting dog.

    Science.gov (United States)

    de Bruijne, J J; de Koster, P

    1983-01-01

    Glycogen concentrations were determined in liver-biopsy specimens which were taken from four dogs during five consecutive days of fasting. It was found that maximal depletion of liver glycogen occurred between the second and the third day. Starvation-induced glycogenolysis was much slower in the dog than in men and rats. Fuel fluxes are discussed and it is tentatively concluded that in the fasting dog larger amounts of glycerol are available for gluconeogenesis than in other species.

  14. Upgrading ATLAS Fast Calorimeter Simulation

    CERN Document Server

    Heath, Matthew Peter; The ATLAS collaboration

    2017-01-01

    Producing the very large samples of simulated events required by many physics and performance studies with the ATLAS detector using the full GEANT4 detector simulation is highly CPU intensive. Fast simulation tools are a useful way of reducing CPU requirements when detailed detector simulations are not needed. During the LHC Run-1, a fast calorimeter simulation (FastCaloSim) was successfully used in ATLAS. FastCaloSim provides a simulation of the particle energy response at the calorimeter read-out cell level, taking into account the detailed particle shower shapes and the correlations between the energy depositions in the various calorimeter layers. It is interfaced to the standard ATLAS digitization and reconstruction software, and it can be tuned to data more easily than Geant4. Now an improved version of FastCaloSim is in development, incorporating the experience with the version used during Run-1. The new FastCaloSim aims to overcome some limitations of the first version by improving the description of s...

  15. Fast Calorimeter Simulation in ATLAS

    CERN Document Server

    Schaarschmidt, Jana; The ATLAS collaboration

    2017-01-01

    Producing the very large samples of simulated events required by many physics and performance studies with the ATLAS detector using the full GEANT4 detector simulation is highly CPU intensive. Fast simulation tools are a useful way of reducing CPU requirements when detailed detector simulations are not needed. During the LHC Run-1, a fast calorimeter simulation (FastCaloSim) was successfully used in ATLAS. FastCaloSim provides a simulation of the particle energy response at the calorimeter read-out cell level, taking into account the detailed particle shower shapes and the correlations between the energy depositions in the various calorimeter layers. It is interfaced to the standard ATLAS digitization and reconstruction software, and it can be tuned to data more easily than GEANT4. It is 500 times faster than full simulation in the calorimeter system. Now an improved version of FastCaloSim is in development, incorporating the experience with the version used during Run-1. The new FastCaloSim makes use of mach...

  16. Size effects on electromechanical coupling fields of a bending piezoelectric nanoplate due to surface effects and flexoelectricity

    Science.gov (United States)

    Zhang, Zhengrong; Jiang, Liying

    2014-10-01

    Due to large surface to volume ratio and manifest strain gradients typically present in nanostructures, it is essential to incorporate both surface effects and flexoelectricity in studying the size-dependent electromechanical coupling behaviors of piezoelectric materials at the nano-scale. In the current work, a modified Kirchhoff plate model with the consideration of residual surface stress, surface elasticity, surface piezoelectricity, and flexoelectricity is developed to investigate the electroelastic responses and vibrational behaviors of a bending piezoelectric nanoplate (PNP). The governing equations and the corresponding boundary conditions accounting for both the surface effects and the flexoelectricity are derived by the variational principle. Ritz approximate solutions of the static bending and the free vibration indicate that these nano-scale features are more prominent for thinner plates with smaller thickness. The simulation results also reveal that the influence of the flexoelectricity and the surface effects upon the bending behaviors of the PNP depends on the applied electrical loading and the plate dimensions. Moreover, it is also observed that the frequency tuning of PNP-based nanoresonators by adjusting applied electrical load can be modified by both the flexoelectricity and the surface effects. The current work is expected to provide increased understanding on the theoretical basis for the design and applications of PNP-based nanodevices.

  17. Fast reactor database. 2006 update

    International Nuclear Information System (INIS)

    2006-12-01

    Liquid metal cooled fast reactors (LMFRs) have been under development for about 50 years. Ten experimental fast reactors and six prototype and commercial size fast reactor plants have been constructed and operated. In many cases, the overall experience with LMFRs has been rather good, with the reactors themselves and also the various components showing remarkable performances, well in accordance with the design expectations. The fast reactor system has also been shown to have very attractive safety characteristics, resulting to a large extent from the fact that the fast reactor is a low pressure system with large thermal inertia and negative power and temperature coefficients. In addition to the LMFRs that have been constructed and operated, more than ten advanced LMFR projects have been developed, and the latest designs are now close to achieving economic competitivity with other reactor types. In the current world economic climate, the introduction of a new nuclear energy system based on the LMFR may not be considered by utilities as a near future option when compared to other potential power plants. However, there is a strong agreement between experts in the nuclear energy field that, for sustainability reasons, long term development of nuclear power as a part of the world's future energy mix will require the fast reactor technology, and that, given the decline in fast reactor development projects, data retrieval and knowledge preservation efforts in this area are of particular importance. This publication contains detailed design data and main operational data on experimental, prototype, demonstration, and commercial size LMFRs. Each LMFR plant is characterized by about 500 parameters: physics, thermohydraulics, thermomechanics, by design and technical data, and by relevant sketches. The focus is on practical issues that are useful to engineers, scientists, managers, university students and professors with complete technical information of a total of 37 LMFR

  18. FAST: An advanced code system for fast reactor transient analysis

    International Nuclear Information System (INIS)

    Mikityuk, Konstantin; Pelloni, Sandro; Coddington, Paul; Bubelis, Evaldas; Chawla, Rakesh

    2005-01-01

    One of the main goals of the FAST project at PSI is to establish a unique analytical code capability for the core and safety analysis of advanced critical (and sub-critical) fast-spectrum systems for a wide range of different coolants. Both static and transient core physics, as well as the behaviour and safety of the power plant as a whole, are studied. The paper discusses the structure of the code system, including the organisation of the interfaces and data exchange. Examples of validation and application of the individual programs, as well as of the complete code system, are provided using studies carried out within the context of designs for experimental accelerator-driven, fast-spectrum systems

  19. Neighborhood fast food availability and fast food consumption

    OpenAIRE

    Oexle, Nathalie; Barnes, Timothy L; Blake, Christine E; Bell, Bethany A; Liese, Angela D

    2015-01-01

    Recent nutritional and public health research has focused on how the availability of various types of food in a person’s immediate area or neighborhood influences his or her food choices and eating habits. It has been theorized that people living in areas with a wealth of unhealthy fast-food options may show higher levels of fast-food consumption, a factor that often coincides with being overweight or obese. However, measuring food availability in a particular area is difficult to achieve con...

  20. Preoperative fasting time in children.

    LENUS (Irish Health Repository)

    Adeel, S

    2012-02-01

    The aim of preoperative fasting is to prevent regurgitation and pulmonary aspiration while limiting potential problems of thirst, dehydration and hypoglycaemia. The American Society of Anaesthesiologists (ASA) has suggested guidelines for preoperative fasting for children undergoing elective surgery. We did a postal survey to determine the current practice regarding these guidelines amongst all specialist registrars in anaesthesia in Ireland. A questionnaire was sent to all specialist registrars in anaesthesia (90 in total), 60 (67%) were returned and analysed. The question asked was how long children should be kept fasting before elective surgery. The results of our survey suggest that most of the respondents are following the ASA guidelines for clear fluids and solids however there were differing opinion regarding the duration of fasting for formula milk and breast milk. In conclusion, we would recommend greater awareness and collaboration between anaesthetists, nurses and surgeons to ensure that fasting instructions are consistent with the ASA guidelines and that patient and their parents understand these directives as well.

  1. InP quantum dots: Electronic structure, surface effects, and the redshifted emission

    International Nuclear Information System (INIS)

    Fu, H.; Zunger, A.

    1997-01-01

    We present pseudopotential plane-wave electronic-structure calculations on InP quantum dots in an effort to understand quantum confinement and surface effects and to identify the origin of the long-lived and redshifted luminescence. We find that (i) unlike the case in small GaAs dots, the lowest unoccupied state of InP dots is the Γ 1c -derived direct state rather than the X 1c -derived indirect state and (ii) unlike the prediction of k·p models, the highest occupied state in InP dots has a 1sd-type envelope function rather than a (dipole-forbidden) 1pf envelope function. Thus explanations (i) and (ii) to the long-lived redshifted emission in terms of an orbitally forbidden character can be excluded. Furthermore, (iii) fully passivated InP dots have no surface states in the gap. However, (iv) removal of the anion-site passivation leads to a P dangling bond (DB) state just above the valence band, which will act as a trap for photogenerated holes. Similarly, (v) removal of the cation-site passivation leads to an In dangling-bond state below the conduction band. While the energy of the In DB state depends only weakly on quantum size, its radiative lifetime increases with quantum size. The calculated ∼300-meV redshift and the ∼18 times longer radiative lifetime relative to the dot-interior transition for the 26-Angstrom dot with an In DB are in good agreement with the observations of full-luminescence experiments for unetched InP dots. Yet, (vi) this type of redshift due to surface defect is inconsistent with that measured in selective excitation for HF-etched InP dots. (vii) The latter type of (open-quotes resonantclose quotes) redshift is compatible with the calculated screened singlet-triplet splitting in InP dots, suggesting that the slow emitting state seen in selective excitation could be a triplet state. copyright 1997 The American Physical Society

  2. Evolution of experimental fast reactors

    International Nuclear Information System (INIS)

    Blazquez, J.

    1983-01-01

    As Paxton points out, during the evolution of fast critical assemblies three stages could be established. In the first one, approximately 1948-1956, the volume of the core is about 1 liter; the aim is to implement very basic neutronic measurement techniques. In the second one, approximately 1956-1970, sizes are as big as 200 liters; what is wanted, is to get data in order to develop the physique of the fast reactors. In the actual third stage, sizes are about 2000 liters and the objective is to have useful data toward the design of commercial power prototypes. Along this article is also found how important are fast breeder reactors to enlarge uranium world resources. (author)

  3. Observations of fast variable objects

    International Nuclear Information System (INIS)

    Alekseev, G.N.

    1978-01-01

    A problem on studying fast variable astronomic objects is considered. The basis of the method used in the experiment is a detailed photoelectric study of a fast variableness along with spectroscopy of a high time resolution. Power spectrum of the SS Cyg brightness oscillations and autocorrelation function of the AX Mon brightness are analyzed as an example. To provide a reliable identification of parameters of star active regions responsible for the fast variableness, an experiment is proposed, the ''synchronous spectroscopy'' method being used. The method is based on the supposition about temporary stationarity of occasional processes within the limits of the time scale of several hours. The block diagram of the experiment is described

  4. Future Assets, Student Talent (FAST)

    Science.gov (United States)

    1992-01-01

    Future Assets, Student Talent (FAST) motivates and prepares talented students with disabilities to further their education and achieve High Tech and professional employment. The FAST program is managed by local professionals, business, and industry leaders; it is modeled after High School High Tech project TAKE CHARGE started in Los Angeles in 1983. Through cooperative efforts of Alabama Department of Education, Vocational Rehabilitation, Adult and Children Services, and the President's Committee on Employment of People with Disabilities, north central Alabama was chosen as the second site for a High School High Tech project. In 1986 local business, industry, education, government agencies, and rehabilitation representatives started FAST. The program objectives and goals, results and accomplishments, and survey results are included.

  5. Review of fast reactor activities in India

    International Nuclear Information System (INIS)

    Paranjpe, S.R.

    1982-01-01

    A review of fast reactor activities in India is introduced. One stage of construction of the Fast Breeder Test Reactor (FBTR) and design studies for 500MWe Prototype Fast Breeder Reactor (PFBR) are briefly summarized. The emphasis is on fast reactor physics, materials studies, radiochemistry, and the safety and fuel reprocessing programme

  6. New AGS fast extraction system

    International Nuclear Information System (INIS)

    Weng, W.T.

    1980-09-01

    Both the high energy physics program and ISA injection require an improved fast extraction system from the AGS. The proposed new system consists of a fast kicker at H5 and an ejector magnet at H10. The H5 kicker is capable of producing 1.2 mrad deflection and rising up to 99% strength in 150 nsec with flat top ripple within +- 1%. It is found that the focusing strengths and positions of UQ3-UQ7 have to be modified to achieve an achromatic condition at the end of 8 0 -bend. Also, the conceptual design of the H5 magnet and the pulser system are discussed

  7. FastJet user manual

    CERN Document Server

    Cacciari, Matteo; Soyez, Gregory

    2012-01-01

    FastJet is a C++ package that provides a broad range of jet finding and analysis tools. It includes efficient native implementations of all widely used 2-to-1 sequential recombination jet algorithms for pp and e+e- collisions, as well as access to 3rd party jet algorithms through a plugin mechanism, including all currently used cone algorithms. FastJet also provides means to facilitate the manipulation of jet substructure, including some common boosted heavy-object taggers, as well as tools for estimation of pileup and underlying-event noise levels, determination of jet areas and subtraction or suppression of noise in jets.

  8. ATLAS FTK: Fast Track Trigger

    CERN Document Server

    Amerio, S; The ATLAS collaboration; Andreazza, A; Annovi, A; Beretta, M; Bevacqua, V; Bogdan, M; Bossini, E; Boveia, A; Cavaliere, V; Canelli, F; Blazey, G; Cervigni, F; Cheng, Y; Citterio, M; Crescioli, F; Dell’Orso, M; Drake, G; Dunford, M; Giannetti, P; Giorgi, F; Hoff, J; Kapliy, A; Kasten, M; Kim, Y K; Kimura, N; Lanza, A; Liberali, V; Liu, T; Magalotti, D; McCarn, A; Melachrinos, C; Meroni, C; Negri, A; Neubauer, M; Penning, B; Piendibene, M; Proudfoot, J; Riva, M; Roda, C; Sabatini, F; Sacco, I; Shochet, M; Stabile, A; Tang, F; Tang, J; Tripiccione, R; Tuggle, J; Vercesi, V; Verzocchi, M; Villa, M; Vitillo, R A; Volpi, G; Webster, J; Wu, J; Yorita, K; Zhang, J

    2011-01-01

    A track reconstruction system for the trigger of the ATLAS detector at the Large Hadron Collider is described. The Fast Tracker is a highly parallel hardware system designed to operate at the Level-1 trigger output rate. It will provide high-quality tracks reconstructed over the entire inner detector by the start of processing in the Level-2 trigger. The system is based on associative memories for pattern recognition and fast FPGA’s for track reconstruction. Its design and expected performance under instantaneous luminosities up to 3 × 10^34/cm^2/s are discussed.

  9. Causes And Effects Of Fast Food

    Directory of Open Access Journals (Sweden)

    Eman Al-Saad

    2015-08-01

    Full Text Available Fast food affects our life in many aspects. In fact There are many reasons that have been shown why people continuing eating fast food while they knew about its negative effects on their health and family because of eating fast food. The commercial advertisements play a major role in consuming fast food. In this research I will focus on causes and effects of eating fast food.

  10. Overview of tritium fast-fission yields

    International Nuclear Information System (INIS)

    Tanner, J.E.

    1981-03-01

    Tritium production rates are very important to the development of fast reactors because tritium may be produced at a greater rate in fast reactors than in light water reactors. This report focuses on tritium production and does not evaluate the transport and eventual release of the tritium in a fast reactor system. However, if an order-of-magnitude increase in fast fission yields for tritium is confirmed, fission will become the dominant production source of tritium in fast reactors

  11. Causes And Effects Of Fast Food

    OpenAIRE

    Eman Al-Saad

    2015-01-01

    Fast food affects our life in many aspects. In fact There are many reasons that have been shown why people continuing eating fast food while they knew about its negative effects on their health and family because of eating fast food. The commercial advertisements play a major role in consuming fast food. In this research I will focus on causes and effects of eating fast food.

  12. Fast reactor research in Switzerland

    International Nuclear Information System (INIS)

    Brogli, R.; Hudina, M.; Pelloni, S.; Sigg, B.; Stanculescu, A.

    1998-01-01

    The small Swiss research program on fast reactors serves to further understanding of the role of LMFR for energy production and to convert radioactive waste to more environmentally benign forms. These activities are on the one hand the contribution to the comparison of advanced nuclear systems and bring on the other to our physical and engineers understanding. (author)

  13. Fast Timing for Collider Detectors

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    Advancements in fast timing particle detectors have opened up new possibilities to design collider detectors that fully reconstruct and separate event vertices and individual particles in the time domain. The applications of these techniques are considered for the physics at HL-LHC.

  14. Fast Detector Simulation Using Lelaps

    Energy Technology Data Exchange (ETDEWEB)

    Langeveld, W

    2004-08-20

    Lelaps is a fast detector simulation program which reads StdHep generator files and produces SIO or LCIO output files. It swims particles through detectors taking into account magnetic fields, multiple scattering and dE/dx energy loss. It simulates parameterized showers in EM and hadronic calorimeters and supports gamma conversions and decays.

  15. Fast Computation of CMH Model

    Science.gov (United States)

    Patel, Umesh D.; DellaTorre, Edward; Day, John H. (Technical Monitor)

    2001-01-01

    A fast differential equation approach for the DOK model has been extented to the CMH model. Also, a cobweb technique for calculating the CMH model is also presented. The two techniques are contrasted from the point of view of flexibility and computation time.

  16. Fast electromagnetic field strength probes

    NARCIS (Netherlands)

    Leferink, Frank Bernardus Johannes; Serra, Ramiro

    2013-01-01

    Diode detectors and thermocouple detectors are conventionally used to measure electromagnetic field strength. Both detectors have some disadvantages for applications where a fast response and a high dynamic range is required. The diode detector is limited in dynamic range. The dynamic range is

  17. Enhanced Model for Fast Ignition

    Energy Technology Data Exchange (ETDEWEB)

    Mason, Rodney J. [Research Applications Corporation, Los Alamos, NM (United States)

    2010-10-12

    Laser Fusion is a prime candidate for alternate energy production, capable of serving a major portion of the nation's energy needs, once fusion fuel can be readily ignited. Fast Ignition may well speed achievement of this goal, by reducing net demands on laser pulse energy and timing precision. However, Fast Ignition has presented a major challenge to modeling. This project has enhanced the computer code ePLAS for the simulation of the many specialized phenomena, which arise with Fast Ignition. The improved code has helped researchers to understand better the consequences of laser absorption, energy transport, and laser target hydrodynamics. ePLAS uses efficient implicit methods to acquire solutions for the electromagnetic fields that govern the accelerations of electrons and ions in targets. In many cases, the code implements fluid modeling for these components. These combined features, "implicitness and fluid modeling," can greatly facilitate calculations, permitting the rapid scoping and evaluation of experiments. ePLAS can be used on PCs, Macs and Linux machines, providing researchers and students with rapid results. This project has improved the treatment of electromagnetics, hydrodynamics, and atomic physics in the code. It has simplified output graphics, and provided new input that avoids the need for source code access by users. The improved code can now aid university, business and national laboratory users in pursuit of an early path to success with Fast Ignition.

  18. Fast form alpha-2-macroglobulin

    DEFF Research Database (Denmark)

    Biltoft, Daniel; Gram, Jørgen Brodersen; Larsen, Anette

    2017-01-01

    . In this study, we investigated whether an enzyme-linked immunosorbent assay (ELISA), that specifically measures the electrophoretic "fast form" of α2-macroglobulin (F-α2M), could be a sensitive and global marker for activation of calcium dependent and in-dependent proteases in plasma exposed to biomaterials...

  19. Fast data processing with Spark

    CERN Document Server

    Sankar, Krishna

    2015-01-01

    Fast Data Processing with Spark - Second Edition is for software developers who want to learn how to write distributed programs with Spark. It will help developers who have had problems that were too big to be dealt with on a single computer. No previous experience with distributed programming is necessary. This book assumes knowledge of either Java, Scala, or Python.

  20. Fast-Track Teacher Recruitment.

    Science.gov (United States)

    Grant, Franklin Dean

    2001-01-01

    Schools need a Renaissance human-resources director to implement strategic staffing and fast-track teacher-recruitment plans. The HR director must attend to customer satisfaction, candidate supply, web-based recruitment possibilities, stabilization of newly hired staff, retention of veteran staff, utilization of retired employees, and latest…

  1. Fast and Objective MRTD measurement

    NARCIS (Netherlands)

    Jong, A.N. de; Bakker, S.J.M.

    1988-01-01

    Manufacturers and Users of the Thermal Imagers have spent very much time upon the definition and measurement of the generally accepted performance curve: MRTD (Minimum Resolvable Temperature Difference). The need for a cheap and fast, objective measurement method has considerably increased since the

  2. The Fast-Casual Conundrum: Fast-Casual Restaurant Entrées Are Higher in Calories than Fast Food.

    Science.gov (United States)

    Schoffman, Danielle E; Davidson, Charis R; Hales, Sarah B; Crimarco, Anthony E; Dahl, Alicia A; Turner-McGrievy, Gabrielle M

    2016-10-01

    Frequently eating fast food has been associated with consuming a diet high in calories, and there is a public perception that fast-casual restaurants (eg, Chipotle) are healthier than traditional fast food (eg, McDonald's). However, research has not examined whether fast-food entrées and fast-casual entrées differ in calorie content. The purpose of this study was to determine whether the caloric content of entrées at fast-food restaurants differed from that found at fast-casual restaurants. This study was a cross-sectional analysis of secondary data. Calorie information from 2014 for lunch and dinner entrées for fast-food and fast-casual restaurants was downloaded from the MenuStat database. Mean calories per entrée between fast-food restaurants and fast-casual restaurants and the proportion of restaurant entrées that fell into different calorie ranges were assessed. A t test was conducted to test the hypothesis that there was no difference between the average calories per entrée at fast-food and fast-casual restaurants. To examine the difference in distribution of entrées in different calorie ranges between fast-food and fast-casual restaurants, χ(2) tests were used. There were 34 fast-food and 28 fast-casual restaurants included in the analysis (n=3,193 entrées). Fast-casual entrées had significantly more calories per entrée (760±301 kcal) than fast-food entrées (561±268; Pfast-casual entrées compared with fast-food entrées exceeded the median of 640 kcal per entrée (Pfast-casual entrées contained more calories than fast-food entrées in the study sample, future studies should compare actual purchasing patterns from these restaurants to determine whether the energy content or nutrient density of full meals (ie, entrées with sides and drinks) differs between fast-casual restaurants and fast-food restaurants. Calorie-conscious consumers should consider the calorie content of entrée items before purchase, regardless of restaurant type. Copyright

  3. A fast meteor detection algorithm

    Science.gov (United States)

    Gural, P.

    2016-01-01

    A low latency meteor detection algorithm for use with fast steering mirrors had been previously developed to track and telescopically follow meteors in real-time (Gural, 2007). It has been rewritten as a generic clustering and tracking software module for meteor detection that meets both the demanding throughput requirements of a Raspberry Pi while also maintaining a high probability of detection. The software interface is generalized to work with various forms of front-end video pre-processing approaches and provides a rich product set of parameterized line detection metrics. Discussion will include the Maximum Temporal Pixel (MTP) compression technique as a fast thresholding option for feeding the detection module, the detection algorithm trade for maximum processing throughput, details on the clustering and tracking methodology, processing products, performance metrics, and a general interface description.

  4. [Preoperative fasting guidelines: an update].

    Science.gov (United States)

    López Muñoz, A C; Busto Aguirreurreta, N; Tomás Braulio, J

    2015-03-01

    Anesthesiology societies have issued various guidelines on preoperative fasting since 1990, not only to decrease the incidence of lung aspiration and anesthetic morbidity, but also to increase patient comfort prior to anesthesia. Some of these societies have been updating their guidelines, as such that, since 2010, we now have 2 evidence-based preoperative fasting guidelines available. In this article, an attempt is made to review these updated guidelines, as well as the current instructions for more controversial patients such as infants, the obese, and a particular type of ophthalmic surgery. Copyright © 2014 Sociedad Española de Anestesiología, Reanimación y Terapéutica del Dolor. Publicado por Elsevier España, S.L.U. All rights reserved.

  5. Spherical Demons: Fast Surface Registration

    Science.gov (United States)

    Yeo, B.T. Thomas; Sabuncu, Mert; Vercauteren, Tom; Ayache, Nicholas; Fischl, Bruce; Golland, Polina

    2009-01-01

    We present the fast Spherical Demons algorithm for registering two spherical images. By exploiting spherical vector spline interpolation theory, we show that a large class of regularizers for the modified demons objective function can be efficiently implemented on the sphere using convolution. Based on the one parameter subgroups of diffeomorphisms, the resulting registration is diffeomorphic and fast – registration of two cortical mesh models with more than 100k nodes takes less than 5 minutes, comparable to the fastest surface registration algorithms. Moreover, the accuracy of our method compares favorably to the popular FreeSurfer registration algorithm. We validate the technique in two different settings: (1) parcellation in a set of in-vivo cortical surfaces and (2) Brodmann area localization in ex-vivo cortical surfaces. PMID:18979813

  6. AGS fast kicker magnet system

    International Nuclear Information System (INIS)

    Weng, W.T.; Cottingham, J.G.; Foelsche, H.; Frey, W.; Ghoshroy, S.; Schmidt, C.; Tuozzolo, J.

    1981-01-01

    A new fast extraction system from the AGS will be implemented to improve the neutrino beam and to serve for ISABELLE injection. The fast kicker for the system is of an open C-type design with a field strength of 1.25 kG at 2650 amperes. The pulser system is a mismatched, discharge type PFN which is capable of delivering a pulse of 3000 amperes peak current at 30 kV dc, with a 2.7 μsec pulse width, 170 nsec rise time, and flat top ripple within +-1%. It also serves as a prototype for an ISA injection magnet, and is to be operated in UHV in the 10 -11 Torr range. Special measures to achieve this goal are also discussed

  7. Mellem frihed og faste rammer

    DEFF Research Database (Denmark)

    Mehlsen, Camilla

    2003-01-01

    Befinder børn sig bedst i faste rammer? Trives de med selvbestemmelse og frie valg? Hvis vi skal besvare sådanne spørgsmål, må vi se på, hvordan børn reelt har det i skole og institutioner, og hvad børn vil med disse steder. Pædagogikken skyder i blinde, hvis ikke vi kender til børns rationaler...

  8. UPSO three channel fast photometer

    Science.gov (United States)

    Gupta, S. K.; Sagar, R.; Joshi, S.; Ashoka, B. N.; Babu, V. C.; Seetha, S.; Girish, V.

    2001-09-01

    The design and performance of a modular portable three channel fast photometer is described. It can be disassembled as single individual channels such that the system can also be used as a single channel photometer. The instrument is put into operation since November 1999 on the 1-m UPSO telescope at Nainital. Since then, it is used extensively for the survey of roAp stars in the northern sky at UPSO. The discoveries made using this new photometer are also mentioned.

  9. Fast computation of Krawtchouk moments

    Czech Academy of Sciences Publication Activity Database

    Honarvar Shakibaei Asli, B.; Flusser, Jan

    2014-01-01

    Roč. 288, č. 1 (2014), s. 73-86 ISSN 0020-0255 R&D Projects: GA ČR GAP103/11/1552 Institutional support: RVO:67985556 Keywords : Krawtchouk polynomial * Krawtchouk moment * Geometric moment * Impulse response * Fast computation * Digital filter Subject RIV: JD - Computer Applications, Robotics Impact factor: 4.038, year: 2014 http://library.utia.cas.cz/separaty/2014/ZOI/flusser-0432452.pdf

  10. Universality in fast quantum quenches

    Energy Technology Data Exchange (ETDEWEB)

    Das, Sumit R. [Department of Physics and Astronomy, University of Kentucky,505 Rose Street, Lexington, KY 40506 (United States); Galante, Damián A. [Department of Applied Mathematics, University of Western Ontario,1151 Richmond Street, London, ON N6A 5B7 (Canada); Perimeter Institute for Theoretical Physics, 31 Caroline Street North, Waterloo, ON N2L 2Y5 (Canada); Myers, Robert C. [Perimeter Institute for Theoretical Physics, 31 Caroline Street North, Waterloo, ON N2L 2Y5 (Canada)

    2015-02-26

    We expand on the investigation of the universal scaling properties in the early time behaviour of fast but smooth quantum quenches in a general d-dimensional conformal field theory deformed by a relevant operator of dimension Δ with a time-dependent coupling. The quench consists of changing the coupling from an initial constant value λ{sub 1} by an amount of the order of δλ to some other final value λ{sub 2}, over a time scale δt. In the fast quench limit where δt is smaller than all other length scales in the problem, δt≪λ{sub 1}{sup 1/(Δ−d)},λ{sub 2}{sup 1/(Δ−d)},δλ{sup 1/(Δ−d)}, the energy (density) injected into the system scales as δE∼(δλ){sup 2}(δt){sup d−2Δ}. Similarly, the change in the expectation value of the quenched operator at times earlier than the endpoint of the quench scales as 〈O{sub Δ}〉∼δλ (δt){sup d−2Δ}, with further logarithmic enhancements in certain cases. While these results were first found in holographic studies, we recently demonstrated that precisely the same scaling appears in fast mass quenches of free scalar and free fermionic field theories. As we describe in detail, the universal scaling refers to renormalized quantities, in which the UV divergent pieces are consistently renormalized away by subtracting counterterms derived with an adiabatic expansion. We argue that this scaling law is a property of the conformal field theory at the UV fixed point, valid for arbitrary relevant deformations and insensitive to the details of the quench protocol. Our results highlight the difference between smooth fast quenches and instantaneous quenches where the Hamiltonian abruptly changes at some time.

  11. ATLAS fast physics monitoring: TADA

    Science.gov (United States)

    Sabato, G.; Elsing, M.; Gumpert, C.; Kamioka, S.; Moyse, E.; Nairz, A.; Eifert, T.; ATLAS Collaboration

    2017-10-01

    The ATLAS experiment at the LHC has been recording data from proton-proton collisions with 13 TeV center-of-mass energy since spring 2015. The collaboration is using a fast physics monitoring framework (TADA) to automatically perform a broad range of fast searches for early signs of new physics and to monitor the data quality across the year with the full analysis level calibrations applied to the rapidly growing data. TADA is designed to provide fast feedback directly after the collected data has been fully calibrated and processed at the Tier-0. The system can monitor a large range of physics channels, offline data quality and physics performance quantities. TADA output is available on a website accessible by the whole collaboration. It gets updated twice a day with the data from newly processed runs. Hints of potentially interesting physics signals or performance issues identified in this way are reported to be followed up by physics or combined performance groups. The note reports as well about the technical aspects of TADA: the software structure to obtain the input TAG files, the framework workflow and structure, the webpage and its implementation.

  12. ATLAS Fast Physics Monitoring: TADA

    CERN Document Server

    Elsing, Markus; The ATLAS collaboration; Sabato, Gabriele; Kamioka, Shusei; Nairz, Armin Michael; Moyse, Edward; Gumpert, Christian

    2016-01-01

    The ATLAS Experiment at the LHC is recording data from proton-proton collisions with 13 TeV center-of-mass energy since spring 2015. The collaboration is using a fast physics monitoring framework (TADA) to automatically perform a broad range of fast searches for early signs of new physics and to monitor the data quality across the year with the full analysis level calibrations applied to the rapidly growing data. TADA is designed to provide fast feedback directly after the collected data has been fully calibrated and processed at the Tier-0. The system can monitor a large range of physics channels, offline data quality and physics performance quantities nearly final analysis level object calibrations. TADA output is available on a website accessible by the whole collaboration that gets updated twice a day with the data from newly processed runs. Hints of potentially interesting physics signals or performance issues identified in this way are reported to be followed up by physics or combined performance groups...

  13. ATLAS Fast Physics Monitoring: TADA

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00375930; The ATLAS collaboration; Elsing, Markus

    2017-01-01

    The ATLAS experiment at the LHC is recording data from proton-proton collisions with 13 TeV center-of-mass energy since spring 2015. The collaboration is using a fast physics monitoring framework (TADA) to automatically perform a broad range of fast searches for early signs of new physics and to monitor the data quality across the year with the full analysis level calibrations applied to the rapidly growing data.TADA is designed to provide fast feedback directly after the collected data has been fully calibrated and processed at the Tier-0, the CERN Data Center. The system can monitor a large range of physics channels, offline data quality and physics performance quantities nearly final analysis level object calibrations. TADA output is available on a website accessible by the whole collaboration that gets updated twice a day with the data from newly processed runs. Hints of potentially interesting physics signals or performance issues identified in this way are reported to be followed up by physics or combin...

  14. Fast Reactors and Nuclear Nonproliferation

    International Nuclear Information System (INIS)

    Avrorina, E.N.; Chebeskovb, A.N.

    2013-01-01

    Conclusion remarks: 1. Fast reactor start-up with U-Pu fuel: – dependent on thermal reactors, – no needs in U enrichment, – needs in SNF reprocessing, – Pu is a little suitable for NED, – practically impossible gun-type NED, – difficulties for implosion-type NED: necessary tests, advanced technologies, etc. – Pu in blankets is similar to WPu by isotopic composition, – Use of blanket for production isotopes (e.g. 233 U), – Combined reprocessing of SNF: altogether blanket and core, – Blanket elimination: decrease in Pu production – No pure Pu separation. 2. Fast reactor start-up with U fuel: - Needs in both U enrichment and SNF reprocessing, - Independent of thermal reactors, - Good Pu bred in the core let alone blankets, - NED of simple gun-type design, - Increase of needs in SWU, - Increased demands in U supply. 3. Fast reactors for export: - Uranium shortage, - To replace thermal reactors in future, - No blankets (depends on the country, though), - Fuel supply and SNF take back, - International centers for rendering services of NFC. Time has come to remove from FRs and their NFC the label unfairly identifying them as the most dangerous installations of nuclear power from the standpoint of being a proliferation problem

  15. The instrumentation of fast reactor

    International Nuclear Information System (INIS)

    Endo, Akira

    2003-03-01

    The author has been engaged in the development of fast reactors over the last 30 years with both an involvement with the early technology development on the experimental breeder reactor Joyo, and latterly continuing this work on the prototype breeder reactor, Monju. In order to pass on this experience to younger engineers this paper is produced to outline this experience in the sincere hope that the information given will be utilised in future educational training material. The paper discusses the wide diversity on the associated instrument technology which the fast breeder reactor requires. The first chapter outlines the fast reactor system, followed by discussions on reactor instrumentation, measurement principles, temperature dependencies, and verification response characteristics from various viewpoints, are discussed in chapters two and three. The important issues of failed fuel location detection, and sodium leak detection from steam generators are discussed in chapters 4 and 5 respectively. Appended to this report is an explanation on the methods of measuring response characteristics on instrumentation systems using error analysis, random signal theory and measuring method of response characteristic by AR (autoregressive) model on which it appears is becoming an indispensable problem for persons involved with this technology in the future. (author)

  16. Medical radiography with fast neutrons

    International Nuclear Information System (INIS)

    Duehmke, E.

    1980-01-01

    Neutron radiography is important in medicine for two reasons. On the one hand, macroradiographical findings are different from X-ray findings, i.e. new information may be gained on the morphology of humans and animals. On the other hand, there is a direct practical application in the radiotherapy of malignant tumours if one considers the assessment of the growth of malignant processes. Fast neutrons are required for neutron radiographies of biological objects with a diameter of more than 2 cm. In addition sensitive, two-dimensional detectors must be used which are selective for fast neutrons. The book describes the optimisation and sensitisation of a detector using the example of cellulose nitrate foil for fast reactor neutrons. Images of human spinal chords with tumours proved by pathological and anatomical examinations give a better picture of the dimensions of the tumour than comparative X-ray pictures. For examinations of living patients, neutron radiography should be applied only in those tumour-bearing parts of the bodies in which radiation treatment is required for therapeutical purposes anyway. (orig./MG) [de

  17. Fleet Assistance and Support Team (FAST) Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The FAST team was established by PMA-264 for introduction of multistatic ASW systems into the Fleet.FAST provides Air ASW mission planning, tactics/tactical sensor...

  18. Percentage of Fast-Track Receipts

    Data.gov (United States)

    Social Security Administration — The dataset provides the percentage of fast-track receipts by state during the reporting fiscal year. Fast-tracked cases consist of those cases identified as Quick...

  19. Status of national programmes on fast reactors

    International Nuclear Information System (INIS)

    1994-04-01

    Based on the International Working Group on Fast reactors (IWGFR) members' request, the IAEA organized a special meeting on Fast Reactor Development and the Role of the IAEA in May 1993. The purpose of the meeting was to review and discuss the status and recent development, to present major changes in fast reactor programmes and to recommend future activities on fast reactors. The IWGFR took note that in some Member States large prototypes have been built or are under construction. However, some countries, due to their current budget constraints, have reduced the level of funding for research and development programmes on fast reactors. The IWGFR noted that in this situation the international exchange of information and cooperation on the development of fast reactors is highly desirable and stressed the importance of the IAEA's programme on fast reactors. These proceedings contain important and useful information on national programmes and new developments in sodium cooled fast reactors in Member States. Refs, figs and tabs

  20. Gluconeogenesis and fasting in cerebral malaria

    NARCIS (Netherlands)

    van Thien, H.; Ackermans, M. T.; Weverling, G. J.; Dang Vinh, T.; Endert, E.; Kager, P. A.; Sauerwein, H. P.

    2004-01-01

    BACKGROUND: In healthy subjects after an overnight fast, glucose production is for approximately 50% derived from glycogenolysis. If the fast is prolonged, glucose production decreases due to a decline in glycogenolysis, while gluconeogenesis remains stable. In cerebral malaria, glucose production

  1. The digital backend of FAST

    Science.gov (United States)

    Yu, Xinying; Zhang, Xia; Duan, Ran; li, di; Hao, Jie

    2015-08-01

    The receiver system is an important part of FAST (Five-hundred-meter Aperture Spherical Radio Telescope) and plays a key role in determining the performance of the telescope.This research covers three major aspects: establishment of system synchronization and timestamps, field-programmable gate array (FPGA)-based data transmission and analysis, and the rear receiver monitoring system. We intend to combine the use of GPS and a frequency standard instrument with network access to Unix timestamps to form actual timestamps. The data are stored with timestamps that contain integer and fractional seconds to be precise and headers, which are primarily intended to distinguish the data from each other.The data analysis procedures includes converting the timestamp information to real-time information, and merging the 8 channels’ data conversion results into frequency and energy data using corresponding conversion formulae. We must develop tailored monitoring software for the FAST receiver to customize the data format and perform data transmission. Signals on the front-end and back-end of the receiver can be monitored and controlled by adjusting the parameters on the software to increase the flexibility of the receiver.Most operations are performed on FPGA board, which can be shown from the figure, including the analog-to-digital conversion (ADC), fast Fourier transform (FFT), and pulse per second (1PPS) and Unix timestamp access operations.When analog data arrive, we initialize two ADCs at a sampling rate of 3Gsps, following by 8-channel FFT parallel processing.In collaboration with the Institute of Automation, we have developed a custom FPGA board which we call "FDB"("FAST Digital Backend"). The board is integrated with two Virtex-6 and one Virtex-5 high-speed Xilinx chips. The main function of the two Virtex-6 devices is to run the FFT and PFB programs, whereas the main function of Virtex-5 is configuration of the board.This research is indispensable for realizing the

  2. Fast Food Paradox: Freedom and Cultural Imperialism

    OpenAIRE

    Lelia Voinea

    2012-01-01

    Fast food is often regarded as a form of cultural imperialism. Fast-food products, originating in the U.S.A., are considered by the critics of this phenomenon as responsible for eroding the interest in local food traditions and affecting their continuity. Based on the results of some researches realized at international and national level, the paper highlights the main issues underlying young people preference for fast-food. The consumption of fast food is associated with the idea of independ...

  3. Fast neutron imaging device and method

    Science.gov (United States)

    Popov, Vladimir; Degtiarenko, Pavel; Musatov, Igor V.

    2014-02-11

    A fast neutron imaging apparatus and method of constructing fast neutron radiography images, the apparatus including a neutron source and a detector that provides event-by-event acquisition of position and energy deposition, and optionally timing and pulse shape for each individual neutron event detected by the detector. The method for constructing fast neutron radiography images utilizes the apparatus of the invention.

  4. THE RAMADAN FAST AND THE DIABETIC PATIENT

    African Journals Online (AJOL)

    THE RAMADAN FAST AND THE. DIABETIC PATIENT. M A K Omar, Ayesha A Motala, F Pirie. Fasting in Ramadan is one of the five pillars of Islam.' From the time of puberty it is ... many type 1 diabetic patients show such an inclination and therefore keep fast during ... in treating diabetes mellitus." Of relevance is an ...

  5. Introduction of the experimental fast reactor JOYO

    International Nuclear Information System (INIS)

    Matsuba, Ken-ichi; Kawahara, Hirotaka; Aoyama, Takafumi

    2006-01-01

    The experimental fast reactor JOYO at O-arai Engineering Center of Japan Nuclear Cycle Development Institute is the first liquid metal cooled fast reactor in Japan. This paper describes the plant outline, experiences on the fast reactor technology and test results accumulated through twenty eight years successful operation of JOYO. (author)

  6. Fast Foods, Organic Foods, Fad Diets

    Science.gov (United States)

    There is no standard definition of fast food. Generally, fast food is eaten without cutlery, and fast-food restaurants have no wait staff. Failure to have a standardized definition makes it difficult to compare studies. Foods available outside the home tend to be high in energy and fat compared w...

  7. Comparison of Fast-Food and Non-Fast-Food Children's Menu Items

    Science.gov (United States)

    Serrano, Elena L.; Jedda, Virginia B.

    2009-01-01

    Objective: Compare the macronutrient content of children's meals sold by fast-food restaurants (FFR) and non-fast-food restaurants (NFF). Design: All restaurants within the designated city limits were surveyed. Non-fast-food children's meals were purchased, weighed, and analyzed using nutrition software. All fast-food children's meals were…

  8. PUC fast track nips returns

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    In the first of what it says will be annual cost-of-capital proceedings to set returns on equity and rates of return on rate base for electric utilities, the California Public Utilities Commission (PUC) lowered from 1989 levels the 1990 returns on common equity (ROE) and rates of return (ROR) for the state's four major investor-owned electric utilities. Under this fast-track procedure, by May 8 of every year, utilities will have to file an application for rate adjustments that reflect their projected costs of capital for the following year

  9. Fast global sequence alignment technique

    KAUST Repository

    Bonny, Mohamed Talal

    2011-11-01

    Bioinformatics database is growing exponentially in size. Processing these large amount of data may take hours of time even if super computers are used. One of the most important processing tool in Bioinformatics is sequence alignment. We introduce fast alignment algorithm, called \\'Alignment By Scanning\\' (ABS), to provide an approximate alignment of two DNA sequences. We compare our algorithm with the wellknown sequence alignment algorithms, the \\'GAP\\' (which is heuristic) and the \\'Needleman-Wunsch\\' (which is optimal). The proposed algorithm achieves up to 51% enhancement in alignment score when it is compared with the GAP Algorithm. The evaluations are conducted using different lengths of DNA sequences. © 2011 IEEE.

  10. Fast processor for dilepton triggers

    International Nuclear Information System (INIS)

    Katsanevas, S.; Kostarakis, P.; Baltrusaitis, R.

    1983-01-01

    We describe a fast trigger processor, developed for and used in Fermilab experiment E-537, for selecting high-mass dimuon events produced by negative pions and anti-protons. The processor finds candidate tracks by matching hit information received from drift chambers and scintillation counters, and determines their momenta. Invariant masses are calculated for all possible pairs of tracks and an event is accepted if any invariant mass is greater than some preselectable minimum mass. The whole process, accomplished within 5 to 10 microseconds, achieves up to a ten-fold reduction in trigger rate

  11. Fast generation of dendritic cells

    DEFF Research Database (Denmark)

    Kvistborg, P; Bøgh, Marie; Pedersen, A W

    2009-01-01

    Dendritic cells (DC) are potent antigen presenting cells capable of inducing immune responses. DC are widely used as vaccine adjuvant in experimental clinical settings. DC-based vaccines are normally generated using a standard 8day DC protocol (SDDC). In attempts to shorten the vaccine production...... SDDC to the IL-10 inducing stimulus of TLR ligands (R848 and LPS). Thus to determine the clinical relevance of fast DC protocols in cancer settings, small phase I trials should be conducted monitoring regulatory T cells carefully....

  12. The integral fast reactor concept

    International Nuclear Information System (INIS)

    Chang, Yoon I.; Marchaterre, J.F.

    1987-01-01

    The Integral Fast Reactor (IFR) is an innovative liquid metal reactor concept being developed at Argonne National Laboratory. It seeks to specifically exploit the inherent properties of liquid metal cooling and metallic fuel in a way that leads to substantial improvements in the characteristics of the complete reactor system. The IFR concept consists of four technical features: (1) liquid sodium cooling, (2) pool-type reactor configuration, (3) metallic fuel, and (4) an integral fuel cycle, based on pyrometallurgical processing and injection-cast fuel fabrication, with the fuel cycle facility collocated with the reactor, if so desired. This paper gives a review of the IFR concept

  13. Surface effect on the electronic and the magnetic properties of rock-salt alkaline-earth metal silicides

    International Nuclear Information System (INIS)

    Bialek, Beata; Lee, Jaeil

    2011-01-01

    An all electron ab-initio method was employed to study the electronic and the magnetic properties of the (001) surface of alkaline-earth metal silicides, CaSi, SrSi, and BaSi, in the rock-salt structure. The three compounds retain their ferromagnetic metallic properties at the surface. Due to the surface effects, the magnetism of the topmost layer is changed as compared with the bulk. This is a short-range effect. In CaSi, the magnetism of the surface layer is noticeably reduced, as compared with the bulk: magnetic moments (MMs) on both Ca and Si atoms are reduced. In SrSi (001), the polarization of electrons in the surface atoms is similar to that in the bulk atoms, and the values of MMs on the component atoms in the topmost layer do not change as much as in CaSi. In BaSi (001), the magnetic properties of Si surface atoms are enhanced slightly, and the magnetism of Ba atoms is not affected considerably by the surface effect. The calculated densities of states confirm the short-range effect of the surface on the electronic properties of the metal silicides.

  14. Concept and canons of fasting in Ayurveda

    Directory of Open Access Journals (Sweden)

    H Shripathi Adiga

    2013-03-01

    Full Text Available Ayurveda, manoeuvres mankind to head a healthy life in order to pursue four-fold bliss. With a view to combat physical and mental annoyances, classics have explicated two-fold therapeutic modalities; langhana/depletion and brihmana/nourishing. Upavasa /fasting is one among ten depletion therapies explained. It is envisioned at all three levels of Ayurvedic therapies- rational/objectively planned, psychological, and spiritual. Fasting is reckoned to be refraining from all forms of food intake for a given period, under supervision of a qualified physician. Acharya Charaka advocates fasting in diseases of milder intensity, in those due to aama (metabolic toxin, after purificatory procedures. Fasting person should avoid beautifying oneself, day sleep, sexual acts, and feasting prior and ulterior to fasting. Fasting is contraindicated in very young, elderly, emaciated, pregnant lady, and shortly after strenuous exercise. The principle avers that fasting kindles metabolic/digestive fire which, in absence of food, brings about paachana of vitiated doshas, thereby riposting health. Sound fasting ensues proper elimination of excretory wastes, clear belch, sweat, and taste for food. Benefits of fasting include lucidity of sense organs, lightness of body and mind, control of diseases, and enthusiasm. Yoga Shastra describes fasting with respect to three levels of food: physical, impressions, and associations and a means to unite three bodies: astral, physical, and causal. Ayurveda thus advocates fasting depending upon the dosha, agni, vaya, kala, and bala of the individual, as a preventive as well as therapeutic modality.

  15. Security Games Involving Search and Patrolling

    Science.gov (United States)

    2017-04-28

    enhancement of our analysis by accounting for the possibility that prey do not return to locations where they were previously found but escaped capture...where the searcher has a limited time horizon T in which to capture the hider and the eventual outcome is uncertain. Thus we are led to a continuous...for time horizons T = :5; 1; 2; 3; each drawn on the relevant interval [0; T ] : Note that each curve ends at T at unit slope s0 (T ) = 1 when it has

  16. The Fast Simulation Chain for ATLAS

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00399337; The ATLAS collaboration; Marshall, Zach

    2017-01-01

    In order to generate the huge number of Monte Carlo events that will be required by the ATLAS experiment over the next several runs, a very fast simulation is critical. Fast detector simulation alone, however, is insufficient: with very high numbers of simultaneous proton-proton collisions expected in Run 3 and beyond, the digitization (detector response emulation) and event reconstruction time quickly become comparable to the time required for detector simulation. The ATLAS Fast Chain simulation has been developed to solve this problem. Modules are implemented for fast simulation, fast digitization, and fast track reconstruction. The application is sufficiently fast—several orders of magnitude faster than the standard simulation—that the simultaneous proton-proton collisions can be generated during the simulation job, so Pythia8 also runs concurrently with the rest of the algorithms. The Fast Chain has been built to be extremely modular and flexible, so that each sample can be custom-tailored to match th...

  17. Proximity to Fast Food Outlets and Supermarkets as Predictors of Fast Food Dining Frequency

    Science.gov (United States)

    Duncan, Dustin T.; Elbel, Brian

    2015-01-01

    Background This study used cross-sectional data to test the independent relationship of (1) proximity to chain fast food outlets and (2) proximity to full-service supermarkets on the frequency of meal-time dining at fast food outlets in two major urban areas, using three approaches to define “access.” Interactions between presence of a supermarket and presence of fast food outlets as predictors of fast food dining were also tested. Methods Residential intersections for respondents in point-of-purchase and random-digit-dial telephone surveys of adults in Philadelphia and Baltimore were geocoded. The count of fast food outlets and supermarkets within quarter-mile, half-mile, and one-mile street network buffers around each respondent’s intersection was calculated, as well as distance to the nearest fast food outlet and supermarket. These variables were regressed on weekly fast-food dining frequency to determine if proximity to fast food and supermarkets had independent and joint effects on fast-food dining. Results The effect of access to supermarkets and chain fast food outlets varied by study population. Among telephone survey respondents, supermarket access was the only significant predictor of fast food dining frequency. Point-of-purchase respondents were generally unaffected by proximity to either supermarkets or fast food outlets. However, ≥1 fast food outlet within a 1-mile buffer was an independent predictor of more fast food meals among point-of-purchase respondents. At ¼-mile distance, ≥1 supermarket was predictive of fewer fast food meals. Conclusions Supermarket access was associated with less fast food dining among telephone respondents while access to fast food outlets were associated with more fast food visits among survey respondents identified at point-of-purchase. This study adds to the existing literature on geographic determinants of fast food dining behavior among urban adults in the general population and those who regularly consume

  18. Neighborhood fast food restaurants and fast food consumption: A national study

    OpenAIRE

    Richardson, Andrea S; Boone-Heinonen, Janne; Popkin, Barry M; Gordon-Larsen, Penny

    2011-01-01

    Abstract Background Recent studies suggest that neighborhood fast food restaurant availability is related to greater obesity, yet few studies have investigated whether neighborhood fast food restaurant availability promotes fast food consumption. Our aim was to estimate the effect of neighborhood fast food availability on frequency of fast food consumption in a national sample of young adults, a population at high risk for obesity. Methods We used national data from U.S. young adults enrolled...

  19. Fast reactor core monitoring device

    International Nuclear Information System (INIS)

    Sanda, Toshio; Inoue, Kotaro; Azekura, Kazuo.

    1982-01-01

    Purpose: To enable the rapid and accurate on-line identification of the state of a fast reactor core by effectively utilizing the measured data on the temperature and flow rate of the coolant. Constitution: The spacial power distribution and average assembly power are quickly calculated using an approximate calculating method, the measured values and the calculated values of the inlet and outlet temperature difference, flow rate and coolant physical values of an assembly are combined and are individually obtained, the most definite respective values and their errors are obtained by a least square method utilizing a formula of the relation between these values, and the power distribution and the temperature distribution of a reactor core are estimated in this manner. Accordingly, even when the measuring accuracy and the calculating accuracy are equal as in a fast reactor, the power distribution and the temperature distribution can be accurately estimated on-line at a high speed in a nuclear reactor, information required for the operator is provided, and the reactor can thus be safely and efficiently operated. (Yoshihara, H.)

  20. RCD+: Fast loop modeling server.

    Science.gov (United States)

    López-Blanco, José Ramón; Canosa-Valls, Alejandro Jesús; Li, Yaohang; Chacón, Pablo

    2016-07-08

    Modeling loops is a critical and challenging step in protein modeling and prediction. We have developed a quick online service (http://rcd.chaconlab.org) for ab initio loop modeling combining a coarse-grained conformational search with a full-atom refinement. Our original Random Coordinate Descent (RCD) loop closure algorithm has been greatly improved to enrich the sampling distribution towards near-native conformations. These improvements include a new workflow optimization, MPI-parallelization and fast backbone angle sampling based on neighbor-dependent Ramachandran probability distributions. The server starts by efficiently searching the vast conformational space from only the loop sequence information and the environment atomic coordinates. The generated closed loop models are subsequently ranked using a fast distance-orientation dependent energy filter. Top ranked loops are refined with the Rosetta energy function to obtain accurate all-atom predictions that can be interactively inspected in an user-friendly web interface. Using standard benchmarks, the average root mean squared deviation (RMSD) is 0.8 and 1.4 Å for 8 and 12 residues loops, respectively, in the challenging modeling scenario in where the side chains of the loop environment are fully remodeled. These results are not only very competitive compared to those obtained with public state of the art methods, but also they are obtained ∼10-fold faster. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

  1. Computerized tomography using fast neutrons

    International Nuclear Information System (INIS)

    Maier-Schuler, P.

    1992-03-01

    The equipment is transportable and can be used at different neutron sources. CT-images are presented showing that it is possible to get good results by using CT with fast neutrons in non destructive testing. Small defects with high contrasts can be detected as well as larger defects with small differences in material density. Since the neutrons interact with the nuclei and not with the electron density the CT-images contain different information compared with X-ray or γ images. As neutron sources always emit γ-radiation too, this radiation can be detected simultaneously with the neutrons. Therefore one can get a γ CT-image along with the neutron image. For the examination of small samples or objects containing materials with great differences in the linear attenuation coefficients like Al and H 2 thermal neutrons have been used for CT-measurements too. A spatial resolution and a density resolution of 0.1 mm and about 5% respectively could be achieved in the CT-images with fast neutrons and 0.04 mm with thermal neutrons. (orig./HP) [de

  2. Biological effectiveness of fast neutrons

    International Nuclear Information System (INIS)

    Coppola, M.; Silini, G.

    1980-01-01

    It has been found experimentally that fast neutron RBE values generally increase with decreasing neutron doses. This finding reflects the existence of a difference in the shape between the functional dependences of the effect on dose produced by neutrons and by the reference radiation. The most common interpretation of this difference assumes a linear dose-effect relationship for neutrons and a linear plus quadratic relationship for X - or gamma-rays. In radiation protection the assumption of linearity is taken to be valid throughout the whole dose region of interest and is essential for the validity of the extrapolation to low doses of the risk estimates obtained at higher dose levels. On the other hand, the same trend of the RBE versus neutron dose would still be observed, if the biological effect induced by neutrons would be less than proportional to the dose. However, in this latter case the risks of neutron irradiation estimated from data at higher doses would no longer be safely utilized at lower dose levels. The results of various experiments with fast neutrons on different biological systems are examined in an attempt to throw some light on this aspect of radiation protection. It appears that in some cases linear non-threshold dose-effect relationships may not fit experimental series obtained with neutrons at relatively low doses. (H.K.)

  3. Manybeam velocimeter for fast surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Goosman, D.; Avara, G.; Steinmetz, L.; Lai, C.; Perry, S.

    1996-09-01

    For the past 5 years, we have conceived, built and successfully used a new 10 beam laser velocimeter for monitoring velocity vs time histories of fast moving surfaces, and will have a 20 beam capability soon. We conceived a method to multiplex 5 to 10 beams through a single Fabry-Perot interferometer, without losing any light that our equivalently-performing single beam system could use, and with negligible cross- talk. This saves the cost of 16 interferometers, simplifies operation and takes less space than without multiplexing. We devised special efficient light collecting probes, streak cameras that change sweep speed during the course of the record, and a new double cavity interferometer which is better, cheaper and more flexible than our previous versions. With the 10 recorders, we conceived and employ a method of using both a fast and a slow streak camera on each of 5 beams without reducing the light that is available to either camera separately. Five new galvanometrically-driven triggerable CCD streak cameras will be installed soon.

  4. Fast calorimeter simulation in LHCb

    CERN Multimedia

    CERN. Geneva

    2018-01-01

    Fast calorimeter simulation in LHCb In HEP experiments CPU resources required by MC simulations are constantly growing and become a very large fraction of the total computing power (greater than 75%). At the same time the pace of performance improvements from technology is slowing down, so the only solution is a more efficient use of resources. Efforts are ongoing in the LHC experiments to provide multiple options for simulating events in a faster way when higher statistics is needed. A key of the success for this strategy is the possibility of enabling fast simulation options in a common framework with minimal action by the final user. In this talk we will describe the solution adopted in Gauss, the LHCb simulation software framework, to selectively exclude particles from being simulated by the Geant4 toolkit and to insert the corresponding hits generated in a faster way. The approach, integrated within the Geant4 toolkit, has been applied to the LHCb calorimeter but it could also be used for other subdetec...

  5. ATLAS FTK: Fast Track Trigger

    CERN Document Server

    Volpi, Guido; The ATLAS collaboration

    2015-01-01

    An overview of the ATLAS Fast Tracker processor is presented, reporting the design of the system, its expected performance, and the integration status. The next LHC runs, with a significant increase in instantaneous luminosity, will provide a big challenge to the trigger and data acquisition systems of all the experiments. An intensive use of the tracking information at the trigger level will be important to keep high efficiency in interesting events, despite the increase in multiple p-p collisions per bunch crossing (pile-up). In order to increase the use of tracks within the High Level Trigger (HLT), the ATLAS experiment planned the installation of an hardware processor dedicated to tracking: the Fast TracKer (FTK) processor. The FTK is designed to perform full scan track reconstruction at every Level-1 accept. To achieve this goal, the FTK uses a fully parallel architecture, with algorithms designed to exploit the computing power of custom VLSI chips, the Associative Memory, as well as modern FPGAs. The FT...

  6. Propagation of Love waves with surface effects in an electrically-shorted piezoelectric nanofilm on a half-space elastic substrate.

    Science.gov (United States)

    Zhang, Sijia; Gu, Bin; Zhang, Hongbin; Feng, Xi-Qiao; Pan, Rongying; Alamusi; Hu, Ning

    2016-03-01

    The propagation of Love waves in the structure consisting of a nanosized piezoelectric film and a semi-infinite elastic substrate is investigated in the present paper with the consideration of surface effects. In our analysis, surface effects are taken into account in terms of the surface elasticity theory and the electrically-shorted conditions are adopted on the free surface of the piezoelectric film and the interface between the film and the substrate. This work focuses on the new features in the dispersion relations of different modes due to surface effects. It is found that with the existence of surface effects, the frequency dispersion of Love waves shows the distinct dependence on the thickness and the surface constants when the film thickness reduces to nanometers. In general, phase velocities of all dispersion modes increase with the decrease of the film thickness and the increase of the surface constants. However, surface effects play different functions in the frequency dispersions of different modes, especially for the first mode dispersion. Moreover, different forms of Love waves are observed in the first mode dispersion, depending on the presence of the surface effects on the surface and the interface. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Predictors of Ramadan fasting during pregnancy.

    Science.gov (United States)

    van Bilsen, Lily A; Savitri, Ary I; Amelia, Dwirani; Baharuddin, Mohammad; Grobbee, Diederick E; Uiterwaal, Cuno S P M

    2016-12-01

    Although the health effects of Ramadan fasting during pregnancy are still unclear, it is important to identify the predictors and motivational factors involved in women's decision to observe the fast. We investigated these factors in a cross sectional study of 187 pregnant Muslim women who attended antenatal care visits in the Budi Kemuliaan Hospital, Jakarta, Indonesia. The odds of adherence to fasting were reduced by 4% for every week increase in gestational age during Ramadan [odds ratio (OR) 0.96; 95% confidence interval (CI) 0.92, 1.00; p=0.06] and increased by 10% for every one unit increase of women's prepregnancy body mass index (BMI) (OR 1.10; 95% CI 0.99, 1.23; p=0.08). Nonparticipation was associated with opposition from husbands (OR 0.34; 95% CI 0.14, 0.82; p=0.02) and with women's fear of possible adverse effects of fasting on their own or the baby's health (OR 0.47; 95% CI 0.22, 1.01; p=0.05 and OR 0.43; 95% CI 0.21, 0.89; p=0.02, respectively), although they were attenuated in multivariable analysis. Neither age, income, education, employment, parity, experience of morning sickness, nor fasting during pregnancy outside of Ramadan determined fasting during pregnancy. Linear regression analysis within women who fasted showed that the number of days fasted were inversely associated with women's gestational age, fear of possible adverse effects of fasting on their own or the fetal health, and with opposition from husbands. In conclusion, earlier gestational age during Ramadan, husband's opinion and possibly higher prepregnancy BMI, influence women's adherence to Ramadan fasting during pregnancy. Fear of adverse health effects of Ramadan fasting is common in both fasting and non-fasting pregnant women. Copyright © 2016 Ministry of Health, Saudi Arabia. Published by Elsevier Ltd. All rights reserved.

  8. Fast electron transport in shaped solid targets

    International Nuclear Information System (INIS)

    Anle Lei; Cao, L.H.; He, X.T.; Zhang, W.Y.; Tanaka, K.A.; Kodama, R.; Mima, K.; Nakamura, T.; Normatsu, T.; Yu, W.

    2010-01-01

    Complete text of publication follows. The scheme of fast ignition fusion energy relies on the ultra-intense ultra-short (UIUS) laser energy transport into the compressed core plasma. One solution is to insert a hollow cone in the fuel shell to block the UIUS laser from the coronal plasma, thus allowing it to reach the core plasma. The cone not only can guide the UIUS laser to its tip, but can play important roles in the specific cone-in-shell target designed for FI. It was found in a PIC simulation that the cone can guide the fast electrons generated at the inner wall to propagate along the wall surface toward its tip, which would increase the energy density at the tip and might enhance the heating of the core plasma. Surface guiding of fast electrons with planar foil targets has been demonstrated experimentally. However, the guided fast electrons will mix the electrons generated ahead by the laser light with a planar target, and hence one cannot experimentally quantitatively validate the guide of the fast electrons. We investigate the cone guiding of fast electrons with an inverse cone target. We found a novel surface current of fast electrons propagating along the cone wall. The fast electrons generated at the planar outer tip of the inverse cone are guided and confined to propagate along the inverse cone wall to form a surface current by induced transient electric and magnetic fields associated with the current itself. Once departing from the source at the outer tip, this surface current of fast electrons is 'clean', neither experiencing the interacting laser light nor mixing fast electrons ahead, unlike those in cone or planar targets. This surface current in the inverse cone may explicitly give the capability of the guide of fast electron energy by the cone wall. The guiding and confinement of fast electrons is of important for fast ignition in inertial confinement fusion and several applications in high energy density science.

  9. Fast algorithm for Morphological Filters

    International Nuclear Information System (INIS)

    Lou Shan; Jiang Xiangqian; Scott, Paul J

    2011-01-01

    In surface metrology, morphological filters, which evolved from the envelope filtering system (E-system) work well for functional prediction of surface finish in the analysis of surfaces in contact. The naive algorithms are time consuming, especially for areal data, and not generally adopted in real practice. A fast algorithm is proposed based on the alpha shape. The hull obtained by rolling the alpha ball is equivalent to the morphological opening/closing in theory. The algorithm depends on Delaunay triangulation with time complexity O(nlogn). In comparison to the naive algorithms it generates the opening and closing envelope without combining dilation and erosion. Edge distortion is corrected by reflective padding for open profiles/surfaces. Spikes in the sample data are detected and points interpolated to prevent singularities. The proposed algorithm works well both for morphological profile and area filters. Examples are presented to demonstrate the validity and superiority on efficiency of this algorithm over the naive algorithm.

  10. Fast thermal transients on valve

    International Nuclear Information System (INIS)

    Ferjancic, M.; Stok, B.; Halilovic, M.; Koc, P.; Mole, N.; Otrin, Z.; Kotar, A.

    2007-01-01

    One of the regulatory body methods to supervise nuclear safety of a nuclear power plant is a review of plant modifications and evaluation of their impact on plant operating experience. The Slovenian Nuclear Safety Administration (SNSA) licensed in April 2003 the use of leak-before-break (LBB) methodology in the Krsko NPP for the primary loop including surge line and connecting pipelines with minimal diameter of 6 inch. The SNSA decision based also on fracture mechanics analyses that include direct pipe failure mechanisms such as water hammer, creep damage, erosion and corrosion, fatigue and environmental conditions over the entire life of the plant. The evaluation of the operating transients pointed out, that presumed loadings, used for the LBB analysis, did not incorporate all the fast thermal transients data. For that purpose the SNSA requested Faculty of Mechanical Engineering (FS) in Ljubljana to perform additional analyses. The results of the analysis shall confirm the validity of the LBB analysis. (author)

  11. First results on fast baking

    Energy Technology Data Exchange (ETDEWEB)

    Visentin, B. [CEA-Saclay, DSM/DAPNIA/SACM - 91191 Gif/Yvette Cedex (France)]. E-mail: bvisentin@cea.fr; Gasser, Y. [CEA-Saclay, DSM/DAPNIA/SACM - 91191 Gif/Yvette Cedex (France); Charrier, J.P. [CEA-Saclay, DSM/DAPNIA/SACM - 91191 Gif/Yvette Cedex (France)

    2006-07-15

    High gradient performances of bulk niobium cavities go through a low-temperature baking during one or two days, the temperature parameter is adjusted in a narrow tuning range around 110 or 120deg, C. With such treatment, the intrinsic quality factor Q{sub 0} is improved at high fields. Assuming the oxygen diffusion is involved in this phenomenon, we have developed the 'fast baking' (145deg, C/3h) as an alternative method. Similar results have been achieved with this method compared to standard baking. Consequently, for the first time, a link between oxygen diffusion and high field Q-slope has been demonstrated. Furthermore, this method open the way to a simpler and better baking procedure for the large-scale cavity production due to:*time reduction and *possibility to combine baking and drying during cavity preparation.

  12. Fast determination of plasma parameters

    International Nuclear Information System (INIS)

    Wijnands, T.J.; Parlange, F.; Joffrin, E.

    1995-01-01

    Fast analysis of diagnostic signals of a tokamak discharge is demonstrated by using 4 fundamentally different techniques. A comparison between Function Parametrization (FP), Canonical Correlation Analysis (CCA) and a particular Neural Network (NN) configuration known as the Multi Layer Perceptron (MLP) is carried out, thereby taking a unique linear model based on a Singular Value Decomposition (SVD) as a reference. The various techniques provide all functional representations of characteristic plasma parameters in terms of the values of the measurements and are based on an analysis of a large, experimentally achieved database. A brief mathematical description of the various techniques is given, followed by two particular applications to Tore Supra diagnostic data. The first problem is concerned with the identification of the plasma boundary parameters using the poloidal field and differential poloidal flux measurements. A second application involves the interpretation of line integrated data from the multichannel interfero-polarimeter to obtain the central value of the safety factor. (author) 4 refs.; 3 figs

  13. Integral fast reactor safety features

    International Nuclear Information System (INIS)

    Cahalan, J.E.; Kramer, J.M.; Marchaterre, J.F.; Mueller, C.J.; Pedersen, D.R.; Sevy, R.H.; Wade, D.C.; Wei, T.Y.C.

    1988-01-01

    The integral fast reactor (IFR) is an advanced liquid-metal-cooled reactor concept being developed at Argonne National Laboratory. The two major goals of the IFR development effort are improved economics and enhanced safety. In addition to liquid metal cooling, the principal design features that distinguish the IFR are: a pool-type primary system, and advanced ternary alloy metallic fuel, and an integral fuel cycle with on-site fuel reprocessing and fabrication. This paper focuses on the technical aspects of the improved safety margins available in the IFR concept. This increased level of safety is made possible by the liquid metal (sodium) coolant and pool-type primary system layout, which together facilitate passive decay heat removal, and a sodium-bonded metallic fuel pin design with thermal and neutronic properties that provide passive core responses which control and mitigate the consequences of reactor accidents

  14. Integral fast reactor safety features

    International Nuclear Information System (INIS)

    Cahalan, J.E.; Kramer, J.M.; Marchaterre, J.F.; Mueller, C.J.; Pedersen, D.R.; Sevy, R.H.; Wade, D.C.; Wei, T.Y.C.

    1988-01-01

    The Integral Fast Reactor (IFR) is an advanced liquid-metal-cooled reactor concept being developed at Argonne National Laboratory. The two major goals of the IFR development effort are improved economics and enhanced safety. In addition to liquid metal cooling, the principal design features that distinguish the IFR are: (1) a pool-type primary system, (2) an advanced ternary alloy metallic fuel, and (3) an integral fuel cycle with on-site fuel reprocessing and fabrication. This paper focuses on the technical aspects of the improved safety margins available in the IFR concept. This increased level of safety is made possible by (1) the liquid metal (sodium) coolant and pool-type primary system layout, which together facilitate passive decay heat removal, and (2) a sodium-bonded metallic fuel pin design with thermal and neutronic properties that provide passive core responses which control and mitigate the consequences of reactor accidents

  15. Holography for fast reactor inspection

    International Nuclear Information System (INIS)

    Tozer, B.A.

    1980-01-01

    Holography, an optical process whereby an image of the original subject can be reconstructed in three dimensions, is being developed for use as an optical inspection tool. With a potential information storage density of 10 16 bits/m 2 , the ability to reconstruct in 3 dimensions, a depth of field of up to 8 metres, extremely wide angle of view, and potentially diffraction limited resolution, holography should be invaluable for the optical recording of fast reactors during construction, and the inspection of optically accessible regions during operation, or maintenance down-times. The photographic emulsions used for high resolution holography are fine-grained and fog only very slowly when subjected to γ-radiation, so that inspection of highly radio-active regions and components can be effected satisfactorily. Some of the practical limitations affecting holography are described and ways of overcoming them discussed. Some preliminary results are presented. (author)

  16. On Grounding of Fast Ships

    DEFF Research Database (Denmark)

    Simonsen, Bo Cerup; Pedersen, Preben Terndrup

    1997-01-01

    The paper deals with analysis of grounding of high-speed crafts. It is the purpose to present a comprehensive mathematical model for calculation of the overall dynamic ship response during grounding. This procedure is applied to derive the motions, the time varying sectional forces and the local...... loads during grounding on plane, sloping, sandy bottoms for six different designs of fast monohull ships made from steel, aluminium or GRP sandwich materials. The results show that the effect of the hull flexibility is to reduce the overall dynamic sectional loads on the hull girder. The considered...... numerical examples also indicate that, even with impact speeds of 40 knots against a 1:10 sloping bottom, the global strength of the hull girder is not exceeded by the grounding induced loads.For the local deformation of high-speed ship hulls at the point of contact with the ground, the paper presents...

  17. Fast High-Quality Noise

    DEFF Research Database (Denmark)

    Frisvad, Jeppe Revall; Wyvill, Geoff

    2007-01-01

    At the moment the noise functions available in a graphics programmer's toolbox are either slow to compute or they involve grid-line artifacts making them of lower quality. In this paper we present a real-time noise computation with no grid-line artifacts or other regularity problems. In other words......, we put a new tool in the box that computes fast high-quality noise. In addition to being free of artifacts, the noise we present does not rely on tabulated data (everything is computed on the fly) and it is easy to adjust quality vs. quantity for the noise. The noise is based on point rendering (like...... spot noise), but it extends to more than two dimensions. The fact that it is based on point rendering makes art direction of the noise much easier....

  18. Fast-scan NMR imaging

    International Nuclear Information System (INIS)

    Iwaoka, Hideto; Matsuura, Hiroyuki; Sugiyama, Tadashi; Hirata, Takaaki

    1987-01-01

    This paper describes the Fast Recovery (FR) method for fast-scan Nuclear Magnetic Resonance imaging. The FR method uses a sequence of four radio frequency pulses - alternating selective 90 deg nutation pulses and nonselective 180 deg pulses. One free induction decay (FID) signal and one echo signal are detected and averaged to compute a 2-D image. In the modified FR method, extra 180 deg pulses are applied between 90 deg pulses to cause refocusing and the resultant spin echo signals are averaged to improve the signal to noise ratio. For the FR and modified FR sequences, the macroscopic magnetization is restored to equilibrium quickly and exactly; scan time can consequently be less than that for conventional pulse sequences, such as used in the saturation recovery method, without any penalty in signal to noise ratio. This paper derives expressions for the signal to noise ratio, scan time ratio and contrast noise ratio, compares the FR and modified FR methods with the saturation recovery method and presents experimental results for human body images. In theory and practice, the signal to noise ratio for the FR method is larger than that for the modified FR method. For a given signal to noise ratio the scan time is between one half and one fourth that for the saturation recovery method. The optimum repetition period, T r , is 0.07 ∼ 0.25 s for the FR method, and 0.1 ∼ 0.5 s for the modified FR method. Contrast noise ratio is low for high speed imaging, T r = 0.07 ∼ 0.25 s, but, high contrast noise ratio image is obtained for T r > 0.5 s. (author)

  19. FastBit Reference Manual

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Kesheng

    2007-08-02

    An index in a database system is a data structure that utilizes redundant information about the base data to speed up common searching and retrieval operations. Most commonly used indexes are variants of B-trees, such as B+-tree and B*-tree. FastBit implements a set of alternative indexes call compressed bitmap indexes. Compared with B-tree variants, these indexes provide very efficient searching and retrieval operations by sacrificing the efficiency of updating the indexes after the modification of an individual record. In addition to the well-known strengths of bitmap indexes, FastBit has a special strength stemming from the bitmap compression scheme used. The compression method is called the Word-Aligned Hybrid (WAH) code. It reduces the bitmap indexes to reasonable sizes and at the same time allows very efficient bitwise logical operations directly on the compressed bitmaps. Compared with the well-known compression methods such as LZ77 and Byte-aligned Bitmap code (BBC), WAH sacrifices some space efficiency for a significant improvement in operational efficiency. Since the bitwise logical operations are the most important operations needed to answer queries, using WAH compression has been shown to answer queries significantly faster than using other compression schemes. Theoretical analyses showed that WAH compressed bitmap indexes are optimal for one-dimensional range queries. Only the most efficient indexing schemes such as B+-tree and B*-tree have this optimality property. However, bitmap indexes are superior because they can efficiently answer multi-dimensional range queries by combining the answers to one-dimensional queries.

  20. Size and surface effects in the magnetic order of CoFe{sub 2}O{sub 4} nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Pianciola, Betiana N. [Instituto Balseiro, S.C. Bariloche 8400 (Argentina); Centro Atómico Bariloche – CNEA/ CONICET, S.C. Bariloche 8400 (Argentina); Lima, Enio [Centro Atómico Bariloche – CNEA/ CONICET, S.C. Bariloche 8400 (Argentina); Troiani, Horacio E. [Instituto Balseiro, S.C. Bariloche 8400 (Argentina); Centro Atómico Bariloche – CNEA/ CONICET, S.C. Bariloche 8400 (Argentina); Nagamine, Luiz C.C.M.; Cohen, R. [Instituto de Física, Universidade de São Paulo, São Paulo 05508-090 (Brazil); Zysler, Roberto D., E-mail: zysler@cab.cnea.gov.ar [Instituto Balseiro, S.C. Bariloche 8400 (Argentina); Centro Atómico Bariloche – CNEA/ CONICET, S.C. Bariloche 8400 (Argentina)

    2015-03-01

    In this work, we have focused on the size dependence of the magnetic properties and the surface effects of CoFe{sub 2}O{sub 4} nanoparticles synthesized by high-temperature chemical method with diameter d∼2, 4.5, and 7 nm, with narrow size distribution. transmission electron microscopy (TEM) images and X-ray diffraction (XRD) profiles indicates that samples with 7 and 4.5 nm present a high crystallinity while the 2 nm sample has a poor one. We have investigated by magnetization measurements and in-field Mössbauer spectroscopy the influence of the surface in the internal magnetic order of the particles. Particles with d=7 nm have almost single domain behavior and the monodomain occupies approximately the whole particle. In the sample with d=4.5 nm the surface anisotropy is large enough to alter the ferrimagnetic order in the particle shell. Then, a surface/volume ratio of ∼60% is the crossover between a single domain nanoparticle and a frustrated order in a magnetic core–shell structure, due to the competition between surface anisotropy and exchange interaction+crystalline anisotropy in cobalt ferrite. In the d=2 nm sample the poor crystallinity and the large surface/volume ratio avoid the ferrimagnetic order in the particle down to T=5 K. - Highlights: • This article analyzes the results of magnetization and Mössbauer spectroscopy measurements of cobalt ferrite (CoFe{sub 2}O{sub 4}) nanoparticles with different sizes. • Three samples with different sizes (and narrow size distribution) from 2 nm to 7 nm have been studied. • A clear evidence of the existence of magnetic disorder at the particle surface in 2 nm and 4.5 nm nanoparticles is reported. • The surface effect in this magnetic disorder as a function of nanoparticle size is discussed.

  1. International Experience with Fast Reactor Operation & Testing

    International Nuclear Information System (INIS)

    Sackett, John I.; Grandy, C.

    2013-01-01

    Conclusion: • Worldwide experience with fast reactors has demonstrated the robustness of the technology and it stands ready for worldwide deployment. • The lessons learned are many and there is danger that what has been learned will be forgotten given that there is little activity in fast reactor development at the present time. • For this reason it is essential that knowledge of fast reactor technology be preserved, an activity supported in the U.S. as well as other countries

  2. Physiological changes during fasting in Ramadan.

    Science.gov (United States)

    Meo, Sultan Ayoub; Hassan, Asim

    2015-05-01

    Fasting during Ramadan is one of the five fundamental pillars of Islam and mandatory for all healthy adult Muslims to fast from sunrise to sunset for a period of a month. During fasting, Muslims are required to refrain from all intakes of food, water, beverages, smoking and from sexual intercourse. Ramadan fasting causes many physiological, biochemical, metabolic and spiritual changes in the body. Ramadan Fasting increases the Red Blood Cells (RBCs), White Blood Cells (WBCs), platelet (PLT) count, High Density Lipoprotein Cholesterol (HDL-c), and decreases the blood cholesterol, triglycerides, Low Density Lipoprotein Cholesterol (LDL-c) and Very Low Density Lipoprotein Cholesterol (VLDL-c). Moreover, it reduces body weight, waist circumference, body mass index, body fat, blood glucose, systolic and diastolic blood pressure and anxiety levels. Furthermore, Ramadan fasting decreases the inflammation, pro-inflammatory cytokines IL-1b, IL-6, tumour necrosis factor a and cancer promotion. Among healthy adults, there are no adverse effects of Ramadan fasting on the brain, heart, lung, liver, kidney, haematologic, endocrine profile and cognitive functions. Ramadan fasting is a healthy non pharmacological means for minimizing the risk factors and improving health. Although Ramadan fasting is safe for all healthy individuals, but those with various illnesses such as diabetes mellitus, coronary artery disease, renal and eye illness should consult their physicians and firmly follow the scientific recommendations.

  3. Fast breeder reactors an engineering introduction

    CERN Document Server

    Judd, A M

    1981-01-01

    Fast Breeder Reactors: An Engineering Introduction is an introductory text to fast breeder reactors and covers topics ranging from reactor physics and design to engineering and safety considerations. Reactor fuels, coolant circuits, steam plants, and control systems are also discussed. This book is comprised of five chapters and opens with a brief summary of the history of fast reactors, with emphasis on international and the prospect of making accessible enormous reserves of energy. The next chapter deals with the physics of fast reactors and considers calculation methods, flux distribution,

  4. Fasting: Molecular Mechanisms and Clinical Applications

    Science.gov (United States)

    Longo, Valter D.; Mattson, Mark P.

    2014-01-01

    Fasting has been practiced for millennia, but only recently studies have shed light on its role in adaptive cellular responses that reduce oxidative damage and inflammation, optimize energy metabolism and bolster cellular protection. In lower eukaryotes, chronic fasting extends longevity in part by reprogramming metabolic and stress resistance pathways. In rodents intermittent or periodic fasting protects against diabetes, cancers, heart disease and neurodegeneration, while in humans it helps reduce obesity, hypertension, asthma and rheumatoid arthritis. Thus, fasting has the potential to delay aging and help prevent and treat diseases while minimizing the side effects caused by chronic dietary interventions. PMID:24440038

  5. Impact of intermittent fasting on glucose homeostasis.

    Science.gov (United States)

    Varady, Krista A

    2016-07-01

    This article provides an overview of the most recent human trials that have examined the impact of intermittent fasting on glucose homeostasis. Our literature search retrieved one human trial of alternate day fasting, and three trials of Ramadan fasting published in the past 12 months. Current evidence suggests that 8 weeks of alternate day fasting that produces mild weight loss (4% from baseline) has no effect on glucose homeostasis. As for Ramadan fasting, decreases in fasting glucose, insulin, and insulin resistance have been noted after 4 weeks in healthy normal weight individuals with mild weight loss (1-2% from baseline). However, Ramadan fasting may have little impact on glucoregulatory parameters in women with polycystic ovarian syndrome who failed to observe weight loss. Whether intermittent fasting is an effective means of regulating glucose homeostasis remains unclear because of the scarcity of studies in this area. Large-scale, longer-term randomized controlled trials will be required before the use of fasting can be recommended for the prevention and treatment of metabolic diseases.

  6. Fast fault detection for power distribution systems

    OpenAIRE

    Öhrström, Magnus

    2003-01-01

    The main topic of this licentiate thesis is fast faultdetection. The thesis summaries the work performed in theproject“Fast fault detection for distributionsystems”. In the first chapters of the thesis the term“fast”is used in a general manner. The term is laterdefined based upon considerations and conclusions made in thefirst chapters and then related to a specific time. To be able to understand and appreciate why fast faultdetection is necessary, power system faults and theirconsequences ar...

  7. The new ATLAS Fast Calorimeter Simulation

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00223142; The ATLAS collaboration

    2017-01-01

    Current and future need for large scale simulated samples motivate the development of reliable fast simulation techniques. The new Fast Calorimeter Simulation is an improved parameterized response of single particles in the ATLAS calorimeter that aims to accurately emulate the key features of the detailed calorimeter response as simulated with Geant4, yet approximately ten times faster. Principal component analysis and machine learning techniques are used to improve the performance and decrease the memory need compared to the current version of the ATLAS Fast Calorimeter Simulation. A prototype of this new Fast Calorimeter Simulation is in development and its integration into the ATLAS simulation infrastructure is ongoing.

  8. LTFR-4, Library Generated for Fast Reactor Design Program from JAERI Fast-Set Multigroup Constant

    International Nuclear Information System (INIS)

    Suzuki, Tomoo

    1971-01-01

    Nature of physical problem solved: The program processes JAERI-Fast group constants sets of less than 30-group and prepares a binary library tape for efficient usage by a series of related fast reactor design calculation programmes

  9. Regolith on Super Fast Rotators

    Science.gov (United States)

    Sanchez Lana, Diego Paul; Scheeres, Daniel J.

    2017-10-01

    The current understanding of small asteroids in the Solar System is that they are gravitational aggregates held together by gravitational, cohesive and adhesive forces. Results from the Hayabusa mission to Itokawa along with in situ, thermal and radar observations of asteroids have shown that they can be covered in a size distribution of grains that spans from microns to tens of meters. Before the Hayabusa mission, it was generally thought that smaller asteroids would likely be “regolith-free,” due to impact seismic shaking removing the loose covering. Given the regolith-rich surface of that body, it is now an open question whether even smaller bodies, down to a few meters in size, could also retain regolith covering. The question is especially compelling for the small-fast rotators, whose surface centripetal accelerations exceed their gravitational attraction. When the physical theory of cohesion is considered, it becomes possible for small-fast rotators to retain regolith.We use a Soft-Sphere discrete element method (SSDEM) code to simulate a longitudinal slice of a spherical monolith covered by cohesive regolith. The simulations are carried out in the body frame. Tensile strength is varied to span the observed strength of asteroids and spin rate is elevated in small steps until the majority of regolith is removed from the surface. The simulations show that under an increasing spin rate (such as due to the YORP effect), the regolith covering on an otherwise monolithic asteroid is preferentially lost across certain regions of the body. In general, regolith from the mid latitudes is the first to fail at high spin rates. This failure happens either by regolith flowing towards the equator or by detachment of large coherent chunks of material depending on the tensile strength of the regolith. Regolith from the equator region fails next, usually by the detachment of large pieces. Regolith from the poles stays in place unless the spin rates are extremely high. With

  10. ATLAS Fast Tracker Simulation Challenges

    CERN Document Server

    Adelman, Jahred; The ATLAS collaboration; Borodin, Mikhail; Chakraborty, Dhiman; García Navarro, José Enrique; Golubkov, Dmitry; Kama, Sami; Panitkin, Sergey; Smirnov, Yuri; Stewart, Graeme; Tompkins, Lauren; Vaniachine, Alexandre; Volpi, Guido

    2015-01-01

    To deal with Big Data flood from the ATLAS detector most events have to be rejected in the trigger system. the trigger rejection is complicated by the presence of a large number of minimum-bias events – the pileup. To limit pileup effects in the high luminosity environment of the LHC Run-2, ATLAS relies on full tracking provided by the Fast TracKer (FTK) implemented with custom electronics. The FTK data processing pipeline has to be simulated in preparation for LHC upgrades to support electronics design and develop trigger strategies at high luminosity. The simulation of the FTK - a highly parallelized system - has inherent performance bottlenecks on general-purpose CPUs. To take advantage of the Grid Computing power, the FTK simulation is integrated with Monte Carlo simulations at the Production System level above the ATLAS workload management system PanDA. We report on ATLAS experience with FTK simulations on the Grid and next steps for accommodating the growing requirements for resources during the LHC R...

  11. Fast multichannel analog storage system

    International Nuclear Information System (INIS)

    Freytag, D.R.

    1982-11-01

    A Multichannel Analog Storage System based on a commercial 32-channel parallel in/serial out (PISO) analog shift register is described. The basic unit is a single width CAMAC module containing 512 analog cells and the associated logic for data storage and subsequent readout. At sampling rates of up to 30 MHz the signals are strobed directly into the PISO. At higher rates signals are strobed into a fast presampling stage and subsequently transferred in block form into an array of PISO's. Sampling rates of 300 MHz have been achieved with the present device and 1000 MHz are possible with improved signal drivers. The system is well suited for simultaneous handling of many signal channels with moderate numbers of samples in each channel. RMS noise over full scale signal has been measured as 1:3000 (approx. = 11 bit). However, nonlinearities in the response and differences in sensitivity of the analog cells require an elaborate calibration system in order to realize 11 bit accuracy for the analog information

  12. Fast and scalable inequality joins

    KAUST Repository

    Khayyat, Zuhair

    2016-09-07

    Inequality joins, which is to join relations with inequality conditions, are used in various applications. Optimizing joins has been the subject of intensive research ranging from efficient join algorithms such as sort-merge join, to the use of efficient indices such as (Formula presented.)-tree, (Formula presented.)-tree and Bitmap. However, inequality joins have received little attention and queries containing such joins are notably very slow. In this paper, we introduce fast inequality join algorithms based on sorted arrays and space-efficient bit-arrays. We further introduce a simple method to estimate the selectivity of inequality joins which is then used to optimize multiple predicate queries and multi-way joins. Moreover, we study an incremental inequality join algorithm to handle scenarios where data keeps changing. We have implemented a centralized version of these algorithms on top of PostgreSQL, a distributed version on top of Spark SQL, and an existing data cleaning system, Nadeef. By comparing our algorithms against well-known optimization techniques for inequality joins, we show our solution is more scalable and several orders of magnitude faster. © 2016 Springer-Verlag Berlin Heidelberg

  13. Ultra-Fast Hadronic Calorimetry

    Energy Technology Data Exchange (ETDEWEB)

    Denisov, Dmitri [Fermilab; Lukić, Strahinja [VINCA Inst. Nucl. Sci., Belgrade; Mokhov, Nikolai [Fermilab; Striganov, Sergei [Fermilab; Ujić, Predrag [VINCA Inst. Nucl. Sci., Belgrade

    2017-12-18

    Calorimeters for particle physics experiments with integration time of a few ns will substantially improve the capability of the experiment to resolve event pileup and to reject backgrounds. In this paper time development of hadronic showers induced by 30 and 60 GeV positive pions and 120 GeV protons is studied using Monte Carlo simulation and beam tests with a prototype of a sampling steel-scintillator hadronic calorimeter. In the beam tests, scintillator signals induced by hadronic showers in steel are sampled with a period of 0.2 ns and precisely time-aligned in order to study the average signal waveform at various locations w.r.t. the beam particle impact. Simulations of the same setup are performed using the MARS15 code. Both simulation and test beam results suggest that energy deposition in steel calorimeters develop over a time shorter than 3 ns providing opportunity for ultra-fast calorimetry. Simulation results for an "ideal" calorimeter consisting exclusively of bulk tungsten or copper are presented to establish the lower limit of the signal integration window.

  14. [Fast neutron cross section measurements

    International Nuclear Information System (INIS)

    Knoll, G.F.

    1992-01-01

    From its inception, the Nuclear Data Project at the University of Michigan has concentrated on two major objectives: (1) to carry out carefully controlled nuclear measurements of the highest possible reliability in support of the national nuclear data program, and (2) to provide an educational opportunity for students with interests in experimental nuclear science. The project has undergone a successful transition from a primary dependence on our photoneutron laboratory to one in which our current research is entirely based on a unique pulsed 14 MeV fast neutron facility. The new experimental facility is unique in its ability to provide nanosecond bursts of 14 MeV neutrons under conditions that are ''clean'' and as scatter-free as possible, and is the only one of its type currently in operation in the United States. It has been designed and put into operation primarily by graduate students, and has met or exceeded all of its important initial performance goals. We have reached the point of its routine operation, and most of the data are now in hand that will serve as the basis for the first two doctoral dissertations to be written by participating graduate students. Our initial results on double differential neutron cross sections will be presented at the May 1993 Fusion Reactor Technology Workshop. We are pleased to report that, after investing several years in equipment assembly and optimization, the project has now entered its ''data production'' phase

  15. Fast approach for toner saving

    Science.gov (United States)

    Safonov, Ilia V.; Kurilin, Ilya V.; Rychagov, Michael N.; Lee, Hokeun; Kim, Sangho; Choi, Donchul

    2011-01-01

    Reducing toner consumption is an important task in modern printing devices and has a significant positive ecological impact. Existing toner saving approaches have two main drawbacks: appearance of hardcopy in toner saving mode is worse in comparison with normal mode; processing of whole rendered page bitmap requires significant computational costs. We propose to add small holes of various shapes and sizes to random places inside a character bitmap stored in font cache. Such random perforation scheme is based on processing pipeline in RIP of standard printer languages Postscript and PCL. Processing of text characters only, and moreover, processing of each character for given font and size alone, is an extremely fast procedure. The approach does not deteriorate halftoned bitmap and business graphics and provide toner saving for typical office documents up to 15-20%. Rate of toner saving is adjustable. Alteration of resulted characters' appearance is almost indistinguishable in comparison with solid black text due to random placement of small holes inside the character regions. The suggested method automatically skips small fonts to preserve its quality. Readability of text processed by proposed method is fine. OCR programs process that scanned hardcopy successfully too.

  16. How fast do eels grow

    International Nuclear Information System (INIS)

    Hansen, H.J.M.

    1988-01-01

    Not so very much about the growth pattern of the eel is known yet. Eels move about nearly all the time. They are thus very difficult to follow and we do not, for examble, yet know how long it actually takes for them to grow to maturity in the wild. So far, a macroscopic analysis of the number of bright and dark areas (growth rings) in the 'earstones' has been used to determine eel age, but this method was recently challenged. Use of radioisotopes has been suggested previously for this purpose. For this present study the rare earth elements, europium-152 and europium-155 are used. When incubated in artificial sea water, a satisfactory final radioactive label was achieved. Two experiments were planned in collaboration with the Swedish Environmental Protection Agency. 2000 Elvers were set out in 1982, in the cooling water outlet of the Oskarshamn nuclear power plant, each marked with europium-155. In 1984 another 10 000 elvers labelled with europium-152 were set out under similar conditions. The idea was mainly to see how fast the eels would grow, and to compare their known age with that determined by examining the earstones. Results showed that there was no clear-cut correlation between actual eel age and the biological age determination used so far. During four years, only 10 of the original 1300 eels were recaptured. It is thus hard to say anything definite from our results on the viability of setting out elvers in the environment

  17. The ATLAS Fast Tracker system

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00353645; The ATLAS collaboration

    2017-01-01

    From 2010 to 2012 the Large Hadron Collider (LHC) operated at a centre-of-mass energy of 7 TeV and 8 TeV, colliding bunches of particles every 50 ns. During operation, the ATLAS trigger system has performed efficiently contributing to important results, including the discovery of the Higgs boson in 2012. The LHC restarted in 2015 and will operate for four years at a center of mass energy of 13 TeV and bunch crossing of 50 ns and 25 ns. These running conditions result in the mean number of overlapping proton-proton interactions per bunch crossing increasing from 20 to 60. The Fast Tracker (FTK) system is designed to deliver full event track reconstruction for all tracks with transverse momentum above 1 GeV at a Level-1 rate of 100 kHz with an average latency below 100 microseconds. This will allow the trigger to utilize tracking information from the entire detector at an earlier event selection stage than ever before, allowing for more efficient event rejection. To achieve this goal the system uses a parallel ...

  18. The Fast TracKer

    CERN Document Server

    Potamianos, Karolos Jozef; The ATLAS collaboration

    2018-01-01

    The Fast Tracker (FTK) is a hardware upgrade to the ATLAS trigger and data acquisition system providing global track reconstruction to the High-Level Trigger (HLT) with the goal to improve pile-up rejection. The FTK processes incoming data from the Pixel and SCT detectors (part of the Inner Detector, ID) at up to 100 kHz using custom electronic boards. ID hits are matched to pre-defined track patterns stored in associative memory (AM) on custom ASICs and data routing, reduction and parameter extraction is achieved with processing on FPGAs. With 8000 AM chips and 2000 FPGAs, the FTK provides enough resources to reconstruct tracks with transverse momentum greater than 1 GeV/c in the whole tracking volume with an average latency below 100 microseconds at collisions intensities expected in Runs II and III of the LHC. The tracks will be available at the beginning of the trigger selection process, which allows development of pile-up resilient triggering strategies to identify b-quarks and tau-leptons, as well as pr...

  19. The UK commercial demonstration fast reactor design

    International Nuclear Information System (INIS)

    Holmes, J.A.G.

    1987-01-01

    The paper on the UK Commercial Demonstration Fast Reactor design was presented to the seminar on 'European Commercial Fast Reactor Programme, London 1987. The design is discussed under the topic headings:- primary circuit, intermediate heat exchangers and pumps, fuel and core, refuelling, steam generators, and nuclear island layout. (U.K.)

  20. FAST TCP: From Theory to Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Jin, C.

    2004-11-23

    We describe a variant of TCP, called FAST, that can sustain high throughput and utilization at multi-Gbps over large distance. We present the motivation, review the background theory, summarize key features of FAST TCP, and report our first experimental results.

  1. Fast-track revision knee arthroplasty

    DEFF Research Database (Denmark)

    Husted, Henrik; Otte, Niels Kristian Stahl; Kristensen, Billy B

    2011-01-01

    Abstract Background and purpose Fast-track surgery has reduced the length of hospital stay (LOS), morbidity, and convalescence in primary hip and knee arthroplasty (TKA). We assessed whether patients undergoing revision TKA for non-septic indications might also benefit from fast-track surgery...

  2. Review of Fast Reactor Activities, March 1980

    International Nuclear Information System (INIS)

    Balz, W.

    1980-01-01

    As in previous years, a short outline of the major achievements made since the last IWGFR meeting is given in the following. On 18 February 1980 the Council of Ministers has approved a resolution in which they recognise the strategic importance of fast breeder reactors and the need to continue the efforts towards maintaining an effective fast breeder option in the Member States

  3. Research Program of a Super Fast Reactor

    International Nuclear Information System (INIS)

    Oka, Yoshiaki; Ishiwatari, Yuki; Liu, Jie; Terai, Takayuki; Nagasaki, Shinya; Muroya, Yusa; Abe, Hiroaki; Mori, Hideo; Akiba, Masato; Akimoto, Hajime; Okumura, Keisuke; Akasaka, Naoaki; GOTO, Shoji

    2006-01-01

    Research program of a supercritical-pressure light water cooled fast reactor (Super Fast Reactor) is funded by MEXT (Ministry of Education, Culture, Sports, Science and Technology) in December 2005 as one of the research programs of Japanese NERI (Nuclear Energy Research Initiative). It consists of three programs. (1) development of Super Fast Reactor concept; (2) thermal-hydraulic experiments; (3) material developments. The purpose of the concept development is to pursue the advantage of high power density of fast reactor over thermal reactors to achieve economic competitiveness of fast reactor for its deployment without waiting for exhausting uranium resources. Design goal is not breeding, but maximizing reactor power by using plutonium from spent LWR fuel. MOX will be the fuel of the Super Fast Reactor. Thermal-hydraulic experiments will be conducted with HCFC22 (Hydro chlorofluorocarbons) heat transfer loop of Kyushu University and supercritical water loop at JAEA. Heat transfer data including effect of grid spacers will be taken. The critical flow and condensation of supercritical fluid will be studied. The materials research includes the development and testing of austenitic stainless steel cladding from the experience of PNC1520 for LMFBR. Material for thermal insulation will be tested. SCWR (Supercritical-Water Cooled Reactor) of GIF (Generation-4 International Forum) includes both thermal and fast reactors. The research of the Super Fast Reactor will enhance SCWR research and the data base. The research period will be until March 2010. (authors)

  4. Ramadan fasting and inflammatory bowel disease.

    Science.gov (United States)

    Tavakkoli, Hamid; Haghdani, Saeid; Emami, Mohammad Hassan; Adilipour, Haideh; Tavakkoli, Mahbobeh; Tavakkoli, Monireh

    2008-01-01

    Ramadan fasting may induce changes in gastrointestinal physiology. The effect of this fasting on inflammatory bowel disease (IBD) is not known. We conducted a cohort study in the month of Ramadan in 2006 to assess the effect of Ramadan fasting on IBD. Sixty patients with IBD, who were in remission and undertook fasting according to their own free will underwent assessment of quality-of-life (QoL) parameters, psychological state and the severity of symptoms before and after Ramadan. There was no correlation between the number of fasting days and the severity of the disease, QoL and psychological state of the patients. QoL did not change after Ramadan. Younger patients with ulcerative colitis (UC) fasted for a greater number of days (p=0.01) compared to older patients. The mean score of anxiety, using a modified version of the Hospital Anxiety and Depression Scale was 12.7 (6.0) before Ramadan in women with UC, and decreased to 9.8 (4.4) afterfasting (p=0.026). Men with UC had a mean score of colitis activity index of 3.5 before Ramadan, which decreased to 1.7 after fasting (p=0.008). It appears that Ramadan fasting does not impose serious risks on patients with IBD.

  5. Effect of Ramadan fasting on tear proteins.

    Science.gov (United States)

    Sariri, Reyhaneh; Varasteh, Abdolali; Sajedi, Reza Hassan

    2010-01-01

    Muslims abstain from eating, drinking and smoking from dawn to sunset during the holy month of Ramadan. Prolonged fasting is thought to be among risk factors for many diseases, e.g., cardiovascular, gastrointestinal and various infectious diseases. It could also play a part in several eye diseases, including dry eye syndrome, glaucoma, and cataract. Toxic and oxidative effects due to increased concentrations of some biochemicals as a result of reduction in tear volume thought to play an important role in damaging ocular tissue. Human tear is an important biological fluid similar to blood in many aspects. Tear film is composed of three basic layers i.e. lipid, aqueous and mucin. The tear film covering the ocular surface presents a mechanical and antimicrobial barrier, and endures an optical refractive surface. The aim of this study was to analyze and compare tear protein of volunteers during fasting. Using two reliable analytical methods, i.e. electrophoresis and high performance liquid chromatography (HPLC), we compared tear protein content of sixty volunteers (35 males and 25 females, 23-27 years old) during fasting in holly month of Ramadan (FAST: n = 62) and one month before Ramadan (CTRL: n = 60). The results showed that some identified tear proteins decreased during fasting. On the other hand, the activity of some enzymes such as lysozyme, lactoferrin and alpha amylase also decreased in fasting samples. Electrophoresis results showed that tear protein patterns in FAST (P FAST group (P < 0.005) than in CTRL.

  6. Effect of fasting on renal physiology

    Directory of Open Access Journals (Sweden)

    Achraf Hendawy

    2014-11-01

    Full Text Available Total abstention from food and water from sunrise to sunset during the month of Ramadan, is practiced by hundreds of millions of Muslims throughout the world. This pattern of fasting during Ramadan is different from the usual fasting as people are allowed to eat and drink between sunset and dawn but not after dawn. The amount and type of food (rich in protein, fat and sugar eaten during the night may also be significantly different to that usually consumed during the rest of the year, while in other countries factors such as poverty ensure that the Ramadan fast results in a reduction in energy intake and a loss of body fat. Also, climate and duration of fasting differs from region to another. According to Islam, sick people are exempted from Fasting, but still a significant number of patients with various chronic diseases including chronic kidney diseases (CKD insist on fasting in Ramadan due to their personal beliefs and physicians are facing this problem every year: What to advice their patients as there are no guidelines or protocols about who can and who cannot fast. In general no detrimental effects on health have been directly attributed to fasting during Ramadan. However caution is advised for moderate to severe CKD patients and the physicians should monitor their patients carefully during Ramadan in order to avoid any deleterious effects.

  7. Aspects of the fast reactors fuel cycle

    International Nuclear Information System (INIS)

    Zouain, D.M.

    1982-06-01

    The fuel cycle for fast reactors, is analysed, regarding the technical aspects of the developing of the reprocessing stages and the fuel fabrication. The environmental impact of LMFBRs and the waste management of this cycle are studied. The economic aspects of the fuel cycle, are studied too. Some coments about the Brazilian fast reactors programs are done. (E.G.) [pt

  8. Optical imaging of fast, dynamic neurophysiological function.

    Energy Technology Data Exchange (ETDEWEB)

    Rector, D. M. (David M.); Carter, K. M. (Kathleen M.); Yao, X. (Xincheng); George, J. S. (John S.)

    2002-01-01

    Fast evoked responses were imaged from rat dorsal medulla and whisker barrel cortex. To investigate the biophysical mechanisms involved, fast optical responses associated with isolated crustacean nerve stimulation were recorded using birefringence and scattered light. Such studies allow optimization of non-invasive imaging techniques being developed for use in humans.

  9. Fasting: the history, pathophysiology and complications.

    Science.gov (United States)

    Kerndt, P R; Naughton, J L; Driscoll, C E; Loxterkamp, D A

    1982-11-01

    An appreciation of the physiology of fasting is essential to the understanding of therapeutic dietary interventions and the effect of food deprivation in various diseases. The practice of prolonged fasting for political or religious purposes is increasing, and a physician is likely to encounter such circumstances. Early in fasting weight loss is rapid, averaging 0.9 kg per day during the first week and slowing to 0.3 kg per day by the third week; early rapid weight loss is primarily due to negative sodium balance. Metabolically, early fasting is characterized by a high rate of gluconeogenesis with amino acids as the primary substrates. As fasting continues, progressive ketosis develops due to the mobilization and oxidation of fatty acids. As ketone levels rise they replace glucose as the primary energy source in the central nervous system, thereby decreasing the need for gluconeogenesis and sparing protein catabolism. Several hormonal changes occur during fasting, including a fall in insulin and T(3) levels and a rise in glucagon and reverse T(3) levels. Most studies of fasting have used obese persons and results may not always apply to lean persons. Medical complications seen in fasting include gout and urate nephrolithiasis, postural hypotension and cardiac arrhythmias.

  10. Can fast and slow intelligence be differentiated?

    NARCIS (Netherlands)

    Partchev, I.; de Boeck, P.

    2012-01-01

    Responses to items from an intelligence test may be fast or slow. The research issue dealt with in this paper is whether the intelligence involved in fast correct responses differs in nature from the intelligence involved in slow correct responses. There are two questions related to this issue: 1.

  11. The Light Scattering and Fast Mie Algorithm

    OpenAIRE

    Gliwa, Pawel

    2001-01-01

    The main topics of this paper is to shown a Fast Mie Algorithm FMA as the best way to use the Mie scattering theory for cross section calculation. This fast algorithm used recursion for summing a long timed sum of cylindrical functions.

  12. Intense Terahertz Fields for Fast Energy Release

    Science.gov (United States)

    2016-11-01

    6201 Fort Belvoir, VA 22060-6201 T E C H N IC A L R E P O R T DTRA-TR-17-10 Intense Terahertz Fields for Fast Energy Release...customary unit. Grant #  HDTRA 1-12-1-0044 Intense Terahertz Fields for Fast Energy Release Final Report PI: Keith A. Nelson 617-253-1423 kanelson

  13. Advanced Safeguards Approaches for New Fast Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Durst, Philip C.; Therios, Ike; Bean, Robert; Dougan, A.; Boyer, Brian; Wallace, Rick L.; Ehinger, Michael H.; Kovacic, Don N.; Tolk, K.

    2007-12-15

    This third report in the series reviews possible safeguards approaches for new fast reactors in general, and the ABR in particular. Fast-neutron spectrum reactors have been used since the early 1960s on an experimental and developmental level, generally with fertile blanket fuels to “breed” nuclear fuel such as plutonium. Whether the reactor is designed to breed plutonium, or transmute and “burn” actinides depends mainly on the design of the reactor neutron reflector and the whether the blanket fuel is “fertile” or suitable for transmutation. However, the safeguards issues are very similar, since they pertain mainly to the receipt, shipment and storage of fresh and spent plutonium and actinide-bearing “TRU”-fuel. For these reasons, the design of existing fast reactors and details concerning how they have been safeguarded were studied in developing advanced safeguards approaches for the new fast reactors. In this regard, the design of the Experimental Breeder Reactor-II “EBR-II” at the Idaho National Laboratory (INL) was of interest, because it was designed as a collocated fast reactor with a pyrometallurgical reprocessing and fuel fabrication line – a design option being considered for the ABR. Similarly, the design of the Fast Flux Facility (FFTF) on the Hanford Site was studied, because it was a successful prototype fast reactor that ran for two decades to evaluate fuels and the design for commercial-scale fast reactors.

  14. Fast reactor fuel reprocessing. An Indian perspective

    International Nuclear Information System (INIS)

    Natarajan, R.; Raj, Baldev

    2005-01-01

    The Department of Atomic Energy (DAE) envisioned the introduction of Plutonium fuelled fast reactors as the intermediate stage, between Pressurized Heavy Water Reactors and Thorium-Uranium-233 based reactors for the Indian Nuclear Power Programme. This necessitated the closing of the fast reactor fuel cycle with Plutonium rich fuel. Aiming to develop a Fast Reactor Fuel Reprocessing (FRFR) technology with low out of pile inventory, the DAE, with over four decades of operating experience in Thermal Reactor Fuel Reprocessing (TRFR), had set up at the India Gandhi Center for Atomic Research (IGCAR), Kalpakkam, R and D facilities for fast reactor fuel reprocessing. After two decades of R and D in all the facets, a Pilot Plant for demonstrating FRFR had been set up for reprocessing the FBTR (Fast Breeder Test Reactor) spent mixed carbide fuel. Recently in this plant, mixed carbide fuel with 100 GWd/t burnup fuel with short cooling period had been successfully reprocessed for the first time in the world. All the challenging problems encountered had been successfully overcome. This experience helped in fine tuning the designs of various equipments and processes for the future plants which are under construction and design, namely, the DFRP (Demonstration Fast reactor fuel Reprocessing Plant) and the FRP (Fast reactor fuel Reprocessing Plant). In this paper, a comprehensive review of the experiences in reprocessing the fast reactor fuel of different burnup is presented. Also a brief account of the various developmental activities and strategies for the DFRP and FRP are given. (author)

  15. Predictors of Ramadan fasting during pregnancy

    NARCIS (Netherlands)

    van Bilsen, Lily A.; Savitri, Ary I.; Amelia, Dwirani; Baharuddin, Mohammad; Grobbee, Diederick E.; Uiterwaal, Cuno S P M

    2016-01-01

    Although the health effects of Ramadan fasting during pregnancy are still unclear, it is important to identify the predictors and motivational factors involved in women's decision to observe the fast. We investigated these factors in a cross sectional study of 187 pregnant Muslim women who attended

  16. Metabolic Profiles in Children During Fasting

    NARCIS (Netherlands)

    van Veen, Merel R.; van Hasselt, Peter M.; de Sain-van der Velden, Monique G. M.; Verhoeven, Nanda; Hofstede, Floris C.; de Koning, Tom J.; Visser, Gepke

    BACKGROUND: Hypoglycemia is one of the most common metabolic derangements in childhood. To establish the cause of hypoglycemia, fasting tolerance tests can be used. Currently available reference values for fasting tolerance tests have limitations in their use in daily practice. OBJECTIVE: The aim of

  17. Advances by the Integral Fast Reactor Program

    International Nuclear Information System (INIS)

    Lineberry, M.J.; Pedersen, D.R.; Walters, L.C.; Cahalan, J.E.

    1991-01-01

    The advances by the Integral Fast Reactor Program at Argonne National Laboratory are the subject of this paper. The Integral Fast Reactor (IFR) is an advanced liquid-metal-cooled reactor concept being developed at Argonne National Laboratory. The advances stressed in the paper include fuel irradiation performance, improved passive safety, and the development of a prototype fuel cycle facility. 14 refs

  18. Exercise, fasting, and mimetics: toward beneficial combinations?

    Science.gov (United States)

    Jaspers, Richard T; Zillikens, M Carola; Friesema, Edith C H; delli Paoli, Giuseppe; Bloch, Wilhelm; Uitterlinden, André G; Goglia, Fernando; Lanni, Antonia; de Lange, Pieter

    2017-01-01

    Obesity and type 2 diabetes are associated disorders that involve a multiplicity of tissues. Both fasting and physical exercise are known to counteract dyslipidemia/hyperglycemia. Skeletal muscle plays a key role in the control of blood glucose levels, and the metabolic changes and related signaling pathways in skeletal muscle induced by fasting overlap with those induced by exercise. The reduction of fat disposal has been shown to extend to the liver and to white and brown adipose tissue and to involve an increase in their metabolic activities. In recent years signal transduction pathways related to exercise and fasting/food withdrawal in muscle have been intensively studied, both in animals and in humans. Combining fasting/food withdrawal with exercise in animals as well as in humans causes changes unlike those seen during fasting/food withdrawal or exercise alone, which favor repair of muscle over autophagy. In addition, compounds that mimic exercise have been studied in combination with exercise or fasting/food withdrawal. This review addresses our current knowledge of the mechanisms that underlie the individual and combined effects of fasting/food withdrawal, endurance or resistance exercise, and their mimetics, in muscle vs other organs in rodents and humans, and highlights which combinations may improve metabolic disorders.-Jaspers, R. T., Zillikens, M. C., Friesema, E. C. H., delli Paoli, G., Bloch, W., Uitterlinden, A. G., Goglia, F., Lanni, A., de Lange, P. Exercise, fasting, and mimetics: toward beneficial combinations. © FASEB.

  19. Nutrient quality of fast food kids meals

    Science.gov (United States)

    Exposure of children to kids’ meals at fast food restaurants is high; however, the nutrient quality of such meals has not been systematically assessed. We assessed the nutrient quality of fast food meals marketed to young children, i.e., "kids meals". The nutrient quality of kids’ meals was assessed...

  20. Making Healthy Choices at Fast Food Restaurants

    Science.gov (United States)

    ... your risk of heart disease. Path to improved health So “healthy fast food” sounds like an oxymoron. But that doesn’t ... watch my trans fat intake? Resources Thrillist, Healthiest Fast Food Orders ... Maintenance, nutrition December 19, 2016 Copyright © American Academy ...

  1. FAST Maser Surveys J. S. Zhang

    Indian Academy of Sciences (India)

    (e.g., Caswell et al. 1980; Turner 1979). FAST has much bigger collecting area, with a sensitivity at least one order of magnitude bigger than the telescopes used in the 1970s and 1980s galactic surveys. To achieve the same sensitivity limit, the. FAST surveying speed would be 2 orders of magnitude better. This brings high.

  2. Is fasting necessary for elective cerebral angiography?

    Science.gov (United States)

    Kwon, O-K; Oh, C W; Park, H; Bang, J S; Bae, H-J; Han, M K; Park, S-H; Han, M H; Kang, H-S; Park, S-K; Whang, G; Kim, B-C; Jin, S-C

    2011-05-01

    In order to prevent unexpected events such as aspiration pneumonia, cerebral angiography has been performed under fasting in most cases. We investigated prospectively the necessity of fasting before elective cerebral angiography. The study is an open-labeled clinical trial without random allocation. In total, 2554 patients who underwent elective cerebral angiography were evaluated on development of nausea, vomiting, and pulmonary aspiration during and after angiography. Potential risks and benefits associated with fasting were provided in written documents and through personal counseling to patients before the procedure. The patients chose their fasting or nonfasting option. No restriction in diet was given after angiography. The patients were observed for 24 hours. Nausea and vomiting during and within 1 hour after angiography was considered as a positive event associated with cerebral angiography. The overall incidence of nausea and vomiting during and within 1 hour after angiography was 1.05% (27/2554 patients). There was no patient with pulmonary aspiration. No statistical difference in nausea and vomiting development between the fasting and the diet groups was found. The incidence of nausea and vomiting associated with cerebral angiography is low and not affected by diet or fasting. Pulmonary aspiration had no difference between the diet and the fasting group. Our study suggests that fasting may not be necessary for patients who undergo elective cerebral angiography.

  3. Fasting the Microbiota to Improve Metabolism?

    Science.gov (United States)

    Haas, Joel T; Staels, Bart

    2017-10-03

    While intermittent or periodic fasting provides a variety of favorable health benefits, the molecular mediators of these effects are poorly understood. In this issue of Cell Metabolism, Li and colleagues (2017) highlight the role of gut microbiota in mediating benefits of intermittent fasting through activation of adipose tissue beiging. Copyright © 2017. Published by Elsevier Inc.

  4. Practical Management of Diabetes during Ramadan Fast

    Directory of Open Access Journals (Sweden)

    Sherif IH

    2007-01-01

    Full Text Available Fasting in Ramadan is obligatory for all healthy Muslim adults. No food or drink may be consumed between dawn and sunset [1]. Strictly speaking, the fast of Ramadan is a period of “intermittent fasting” or daily cycles of “alternating” fasting and feeding periods. The periods of the fasting and feeding vary by the geographical locations and by time of the year. During the month of Ramadan, there are two main meals in most Moslem communities. These are commonly referred to by their Arabic origin, namely the “Iftar” (i.e. break of fast immediately after sunset and “Sohur or Suhoor” (i.e. pre-dawn meal. As the Islamic calendar year is lunar, Ramadan (the ninth month therefore starts approximately 10 days earlier each year on the Gregorian calendar. This year, 2007, Ramadan is likely to start between 12th and 14th September.

  5. Economic Issues of Fast Reactor in China

    International Nuclear Information System (INIS)

    Yang Hongyi

    2013-01-01

    Conclusions: 1. More and more fast reactors could be appearing in the world currently and near future. 2. China gets little experience and practice about the economics issues of sodium cooled fast reactors. 3. The economic issues become more and more important for the deplot of fast reactors. Suggestions: 1. An authoritative economic evaluation solution for fast reactor and related fuel cycles facilities is necessary. The solution may be developed by the interested country in order to share the few data, experience and methodology. 2. A new initiative to help to share the economic information for fast reactor and related fuel cycle facilities is necessary. A meeting like TM-44899 organized by the IAEA is very beneficial for this topic and hopefully will continue

  6. Fast-track hip and knee arthroplasty

    DEFF Research Database (Denmark)

    Husted, Henrik

    2012-01-01

    thromboembolic complications in particular (V); feasibility studies showing excellent outcomes following fast-track bilateral simultaneous total knee arthroplasty (VI) and non-septic revision knee arthroplasty (VII); how acute pain relief in total hip arthroplasty is not enhanced by the use of local infiltration......Fast-track hip and knee arthroplasty aims at giving the patients the best available treatment at all times, being a dynamic entity. Fast-track combines evidence-based, clinical features with organizational optimization including a revision of traditions resulting in a streamlined pathway from...... on clinical and organizational aspects of fast-track hip and knee arthroplasty (I–IX). A detailed description of the fast-track set-up and its components is provided. Major results include identification of patient characteristics to predict length of stay and satisfaction with different aspects...

  7. The effect of fasting on surgical performance

    DEFF Research Database (Denmark)

    Schefte, David Fenger; Rosenstock, Steffen Jais

    2016-01-01

    BACKGROUND: It is unknown whether fasting has any impact on surgical performance. This simulator-based study investigates whether fasting affects surgical performance. METHODS: Twelve healthy medical students [seven women, mean age 26.5 years (range 23-34)] with no prior experience with surgical...... simulators underwent a short course introduction to the LapSim(®) simulator. After having reached a predefined level, the participants performed five simulated salpingectomies on the LapSim(®) simulator 5-30 days after the initial introduction. The procedures took place at 9 a.m. and 2 p.m. after fasting...... in the longitudinal axis with the left hand. CONCLUSION: The simulator-based study suggests that 17 h of fasting does not deteriorate surgical performance. Further studies on the effect of fasting on surgical performance are needed....

  8. Fast-Food Consumption, Diet Quality, and Neighborhood Exposure to Fast Food

    Science.gov (United States)

    Diez Roux, Ana V.; Nettleton, Jennifer A.; Jacobs, David R.; Franco, Manuel

    2009-01-01

    The authors examined associations among fast-food consumption, diet, and neighborhood fast-food exposure by using 2000–2002 Multi-Ethnic Study of Atherosclerosis data. US participants (n = 5,633; aged 45–84 years) reported usual fast-food consumption (never, <1 time/week, or ≥1 times/week) and consumption near home (yes/no). Healthy diet was defined as scoring in the top quintile of the Alternate Healthy Eating Index or bottom quintile of a Western-type dietary pattern. Neighborhood fast-food exposure was measured by densities of fast-food outlets, participant report, and informant report. Separate logistic regression models were used to examine associations of fast-food consumption and diet; fast-food exposure and consumption near home; and fast-food exposure and diet adjusted for site, age, sex, race/ethnicity, education, and income. Those never eating fast food had a 2–3-times higher odds of having a healthy diet versus those eating fast food ≥1 times/week, depending on the dietary measure. For every standard deviation increase in fast-food exposure, the odds of consuming fast food near home increased 11%–61% and the odds of a healthy diet decreased 3%–17%, depending on the model. Results show that fast-food consumption and neighborhood fast-food exposure are associated with poorer diet. Interventions that reduce exposure to fast food and/or promote individual behavior change may be helpful. PMID:19429879

  9. Proximity to Fast-Food Outlets and Supermarkets as Predictors of Fast-Food Dining Frequency.

    Science.gov (United States)

    Athens, Jessica K; Duncan, Dustin T; Elbel, Brian

    2016-08-01

    This study used cross-sectional data to test the independent relationship of proximity to chain fast-food outlets and proximity to full-service supermarkets on the frequency of mealtime dining at fast-food outlets in two major urban areas, using three approaches to define access. Interactions between presence of a supermarket and presence of fast-food outlets as predictors of fast-food dining were also tested. Residential intersections for respondents in point-of-purchase and random-digit-dial telephone surveys of adults in Philadelphia, PA, and Baltimore, MD, were geocoded. The count of fast-food outlets and supermarkets within quarter-mile, half-mile, and 1-mile street network buffers around each respondent's intersection was calculated, as well as distance to the nearest fast-food outlet and supermarket. These variables were regressed on weekly fast-food dining frequency to determine whether proximity to fast food and supermarkets had independent and joint effects on fast-food dining. The effect of access to supermarkets and chain fast-food outlets varied by study population. Among telephone survey respondents, supermarket access was the only significant predictor of fast-food dining frequency. Point-of-purchase respondents were generally unaffected by proximity to either supermarkets or fast-food outlets. However, ≥1 fast-food outlet within a 1-mile buffer was an independent predictor of consuming more fast-food meals among point-of-purchase respondents. At the quarter-mile distance, ≥1 supermarket was predictive of fewer fast-food meals. Supermarket access was associated with less fast-food dining among telephone respondents, whereas access to fast-food outlets were associated with more fast-food visits among survey respondents identified at point-of-purchase. This study adds to the existing literature on geographic determinants of fast-food dining behavior among urban adults in the general population and those who regularly consume fast food. Copyright

  10. Fast response liquid crystal devices

    Science.gov (United States)

    Wu, Yung-Hsun

    Liquid crystal (LC) has been widely used for displays, spatial light modulators, variable optical attenuators (VOAs) and other tunable photonic devices. The response time of these devices is mainly determined by the employed liquid crystal material. The response time of a LC device depends on the visco-elastic coefficient (gamma1/K11), LC cell gap (d), and applied voltage. Hence, low visco-elastic coefficient LC materials and thinner cell gap are favorable for reducing the response time. However, low visco-elastic coefficient LCs are usually associated with a low birefringence because of shorter molecular conjugation. For display applications, such as LCD TVs, low birefringence (Deltancommunications at 1550 nm, low birefringence requires to a thick cell gap which, in turn, increases the response time. How to obtain fast response for the LC devices is a fundamentally important and technically challenging task. In this dissertation, we investigate several methods to improve liquid crystal response time, for examples, using dual-frequency liquid crystals, polymer stabilized liquid crystals, and sheared polymer network liquid crystals. We discover a new class of material, denoted as sheared polymer network liquid crystal (SPNLC) which exhibits a submillisecond response time. Moreover, this response time is insensitive to the LC cell gap. This is the first LC device exhibiting such an interesting property. Chapters 1 and 2 describe the motivation and background of this dissertation. From chapter 3 to chapter 6, dual-frequency liquid crystals and polymer network methods are demonstrated as examples for the variable optical attenuators. Variable optical attenuator (VOA) is a key component in optical communications. Especially, the sheared PNLC VOA shows the best result; its dynamic range reaches 43 dB while the response time is in the submillisecond range at 1550 nm wavelength, which is 50 times faster than the commercial LC-based VOA. In Chapter 7, we report a new device

  11. Fast computation of distance estimators

    Directory of Open Access Journals (Sweden)

    Lagergren Jens

    2007-03-01

    Full Text Available Abstract Background Some distance methods are among the most commonly used methods for reconstructing phylogenetic trees from sequence data. The input to a distance method is a distance matrix, containing estimated pairwise distances between all pairs of taxa. Distance methods themselves are often fast, e.g., the famous and popular Neighbor Joining (NJ algorithm reconstructs a phylogeny of n taxa in time O(n3. Unfortunately, the fastest practical algorithms known for Computing the distance matrix, from n sequences of length l, takes time proportional to l·n2. Since the sequence length typically is much larger than the number of taxa, the distance estimation is the bottleneck in phylogeny reconstruction. This bottleneck is especially apparent in reconstruction of large phylogenies or in applications where many trees have to be reconstructed, e.g., bootstrapping and genome wide applications. Results We give an advanced algorithm for Computing the number of mutational events between DNA sequences which is significantly faster than both Phylip and Paup. Moreover, we give a new method for estimating pairwise distances between sequences which contain ambiguity Symbols. This new method is shown to be more accurate as well as faster than earlier methods. Conclusion Our novel algorithm for Computing distance estimators provides a valuable tool in phylogeny reconstruction. Since the running time of our distance estimation algorithm is comparable to that of most distance methods, the previous bottleneck is removed. All distance methods, such as NJ, require a distance matrix as input and, hence, our novel algorithm significantly improves the overall running time of all distance methods. In particular, we show for real world biological applications how the running time of phylogeny reconstruction using NJ is improved from a matter of hours to a matter of seconds.

  12. Modeling of Axially Loaded Nanowires Embedded in Elastic Substrate Media with Inclusion of Nonlocal and Surface Effects

    Directory of Open Access Journals (Sweden)

    Suchart Limkatanyu

    2013-01-01

    Full Text Available Nonlocal and surface effects are incorporated into a bar-elastic substrate element to account for small-scale and size-dependent effects on axial responses of nanowires embedded in elastic substrate media. The virtual displacement principle, employed to consistently derive the governing differential equation as well as the boundary conditions, forms the core of the displacement-based finite element formulation of the nanowire-elastic substrate element. The element displacement shape functions, analytically derived based on homogeneous solution to the governing differential equilibrium equation of the problem, result in the exact element stiffness matrix and equivalent load vector. Two numerical simulations employing the proposed model are performed to study characteristics and behavior of the nanowire-substrate system. The first simulation involves investigation of responses of the wire embedded in elastic substrate. The second examines influences of several system parameters on the contact stiffness and reveals the size-dependent effect on the effective Young's modulus of the system.

  13. IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures : Proceedings of the IUTAM Symposium

    CERN Document Server

    Wang, Jianxiang

    2013-01-01

    This volume constitutes the proceedings of the IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures, held in Beijing, 8-12 August, 2010. The symposium brought together the most active scientists working in this area from the fields of solid mechanics, composites, physics, and materials science and summarized the state-of-the-art research results with a view to advancing the frontiers of mechanics and materials physics.         Nanomaterials and heterostructures have a large fraction of their atoms at surfaces and  interfaces. These atoms see a different environment to those in the interior and can have a substantial effect on the overall mechanical and physical behaviour of a material. The last decade has witnessed a growing interest in the study of surfaces and how the surface behaviour couples with that of the bulk to determine the overall system response. The papers in this proceedings cover: extension of continuum mechanics and thermodynamics to the nano-scale; ...

  14. Neighborhood fast food restaurants and fast food consumption: A national study

    Directory of Open Access Journals (Sweden)

    Gordon-Larsen Penny

    2011-07-01

    Full Text Available Abstract Background Recent studies suggest that neighborhood fast food restaurant availability is related to greater obesity, yet few studies have investigated whether neighborhood fast food restaurant availability promotes fast food consumption. Our aim was to estimate the effect of neighborhood fast food availability on frequency of fast food consumption in a national sample of young adults, a population at high risk for obesity. Methods We used national data from U.S. young adults enrolled in wave III (2001-02; ages 18-28 of the National Longitudinal Study of Adolescent Health (n = 13,150. Urbanicity-stratified multivariate negative binomial regression models were used to examine cross-sectional associations between neighborhood fast food availability and individual-level self-reported fast food consumption frequency, controlling for individual and neighborhood characteristics. Results In adjusted analysis, fast food availability was not associated with weekly frequency of fast food consumption in non-urban or low- or high-density urban areas. Conclusions Policies aiming to reduce neighborhood availability as a means to reduce fast food consumption among young adults may be unsuccessful. Consideration of fast food outlets near school or workplace locations, factors specific to more or less urban settings, and the role of individual lifestyle attitudes and preferences are needed in future research.

  15. Neighborhood fast food restaurants and fast food consumption: a national study.

    Science.gov (United States)

    Richardson, Andrea S; Boone-Heinonen, Janne; Popkin, Barry M; Gordon-Larsen, Penny

    2011-07-08

    Recent studies suggest that neighborhood fast food restaurant availability is related to greater obesity, yet few studies have investigated whether neighborhood fast food restaurant availability promotes fast food consumption. Our aim was to estimate the effect of neighborhood fast food availability on frequency of fast food consumption in a national sample of young adults, a population at high risk for obesity. We used national data from U.S. young adults enrolled in wave III (2001-02; ages 18-28) of the National Longitudinal Study of Adolescent Health (n = 13,150). Urbanicity-stratified multivariate negative binomial regression models were used to examine cross-sectional associations between neighborhood fast food availability and individual-level self-reported fast food consumption frequency, controlling for individual and neighborhood characteristics. In adjusted analysis, fast food availability was not associated with weekly frequency of fast food consumption in non-urban or low- or high-density urban areas. Policies aiming to reduce neighborhood availability as a means to reduce fast food consumption among young adults may be unsuccessful. Consideration of fast food outlets near school or workplace locations, factors specific to more or less urban settings, and the role of individual lifestyle attitudes and preferences are needed in future research.

  16. Fasts, feasts and festivals in diabetes-1: Glycemic management during Hindu fasts.

    Science.gov (United States)

    Kalra, Sanjay; Bajaj, Sarita; Gupta, Yashdeep; Agarwal, Pankaj; Singh, S K; Julka, Sandeep; Chawla, Rajeev; Agrawal, Navneet

    2015-01-01

    This communication is the first of a series on South Asian fasts, festivals, and diabetes, designed to spread awareness and stimulate research on this aspect of diabetes and metabolic care. It describes the various fasts observed as part of Hindu religion and offers a classification scheme for them, labeling them as infrequent and frequent. The infrequent fasts are further sub-classified as brief and prolonged, to facilitate a scientific approach to glycemic management during these fasts. Pre-fast counseling, non-pharmacological therapy, pharmacological modification, and post-fast debriefing are discussed in detail. All available drug classes and molecules are covered in this article, which provides guidance about necessary changes in dosage and timing of administration. While in no way exhaustive, the brief review offers a basic framework which diabetes care professionals can use to counsel and manage persons in their care who wish to observe various Hindu fasts.

  17. Fast magnetoacoustic wave trains in coronal holes

    Science.gov (United States)

    Pascoe, D. J.; Nakariakov, V. M.; Kupriyanova, E. G.

    2014-08-01

    Context. Rapidly propagating coronal EUV disturbances recently discovered in the solar corona are interpreted in terms of guided fast magnetoacoustic waves. Fast magnetoacoustic waves experience geometric dispersion in waveguides, which causes localised, impulsive perturbations to develop into quasi-periodic wave trains. Aims: We consider the formation of fast wave trains in a super-radially expanding coronal hole modelled by a magnetic funnel with a field-aligned density profile that is rarefied in comparison to the surrounding plasma. This kind of structure is typical of coronal holes, and it forms a fast magnetoacoustic anti-waveguide as a local maximum in the Alfvén speed. Methods: We performed 2D MHD numerical simulations for impulsively generated perturbations to the system. Both sausage and kink perturbations are considered and the role of the density contrast ratio investigated. Results: The anti-waveguide funnel geometry refracts wave energy away from the structure. However, in this geometry the quasi-periodic fast wave trains are found to appear, too, and so can be associated with the observed rapidly propagating coronal EUV disturbances. The wave trains propagate along the external edge of the coronal hole. The fast wave trains generated in coronal holes exhibit less dispersive evolution than in the case of a dense waveguide. Conclusions: We conclude that an impulsive energy release localised in a coronal plasma inhomogeneity develops into a fast wave train for both kink and sausage disturbances and for both waveguide and anti-waveguide transverse plasma profiles.

  18. Fast Physics Testbed for the FASTER Project

    Energy Technology Data Exchange (ETDEWEB)

    Lin, W.; Liu, Y.; Hogan, R.; Neggers, R.; Jensen, M.; Fridlind, A.; Lin, Y.; Wolf, A.

    2010-03-15

    This poster describes the Fast Physics Testbed for the new FAst-physics System Testbed and Research (FASTER) project. The overall objective is to provide a convenient and comprehensive platform for fast turn-around model evaluation against ARM observations and to facilitate development of parameterizations for cloud-related fast processes represented in global climate models. The testbed features three major components: a single column model (SCM) testbed, an NWP-Testbed, and high-resolution modeling (HRM). The web-based SCM-Testbed features multiple SCMs from major climate modeling centers and aims to maximize the potential of SCM approach to enhance and accelerate the evaluation and improvement of fast physics parameterizations through continuous evaluation of existing and evolving models against historical as well as new/improved ARM and other complementary measurements. The NWP-Testbed aims to capitalize on the large pool of operational numerical weather prediction products. Continuous evaluations of NWP forecasts against observations at ARM sites are carried out to systematically identify the biases and skills of physical parameterizations under all weather conditions. The highresolution modeling (HRM) activities aim to simulate the fast processes at high resolution to aid in the understanding of the fast processes and their parameterizations. A four-tier HRM framework is established to augment the SCM- and NWP-Testbeds towards eventual improvement of the parameterizations.

  19. A prospective audit of preprocedural fasting practices on a transplant ward: when fasting becomes starving.

    Science.gov (United States)

    Vidot, Helen; Teevan, Kate; Carey, Sharon; Strasser, Simone; Shackel, Nicholas

    2016-03-01

    To investigate the prevalence and duration of preprocedural medically ordered fasting during a period of hospitalisation in an Australian population of patients with hepatic cirrhosis or following liver transplantation and to identify potential solutions to reduce fasting times. Protein-energy malnutrition is a common finding in patients with hepatic cirrhosis and can impact significantly on survival and quality of life. Protein and energy requirements in patients with cirrhosis are higher than those of healthy individuals. A significant feature of cirrhosis is the induction of starvation metabolism following seven to eight hours of food deprivation. Many investigative and interventional procedures for patients with cirrhosis necessitate a period of fasting to comply with anaesthesia guidelines. An observational study of the fasting episodes for 34 hospitalised patients with hepatic cirrhosis or following liver transplantation. Nutritional status was estimated using subjective global assessment and handgrip strength. The prevalence and duration of fasting practices for diagnostic or investigational procedures were estimated using electronic records and patient notes. Thirty-three patients (97%) were malnourished. Twenty-two patients (65%) were fasted during the observation period. There were 43 occasions of fasting with a median fasting time of 13·5 hours. On 40 occasions fasting times exceeded the maximum six-hour guideline recommended prior to the administration of anaesthesia by the majority of Anaesthesiology Societies. The majority of procedures (77%) requiring fasting occurred after midday. Eating breakfast on the day of the procedure reduced fasting time by 45%. Medically ordered preprocedural fasting times almost always exceed existing guidelines in this nutritionally compromised group. Adherence to fasting guidelines and eating breakfast before the procedure can reduce fasting times significantly and avoid the potential induction of starvation metabolism

  20. A review of the UK fast reactor programme. March 1977

    International Nuclear Information System (INIS)

    Smith, R.D.

    1977-01-01

    This paper reports on the Fast Reactor Programme of United Kingdom. These are the main lines: Dounreay Fast Reactor; Prototype Fast Reactor; Commercial Fast Reactor; engineering development; materials development; chemical engineering/sodium technology; fast reactor fuel; fuel cycle; safety; reactor performance study

  1. The energy gap and the fast reactor

    International Nuclear Information System (INIS)

    Hill, J.

    1977-01-01

    The background to the development of fast reactors is summarized. In Britain, the results of the many experiments performed, the operation of the Dounreay Fast Reactor for the past 18 years and the first year's operation of the larger Prototype Fast Reactor have all been very encouraging, in that they demonstrated that the performance corresponded well with predictions, breeding is possible, and the system is exceptionally stable in operation. The next step in fast reactor engineering is to build a full-scale fast reactor power station. There would seem to be little reason to expect more trouble than could reasonably be expected in constructing any large project of this general nature. However, from an engineering point of view continuity of experience is required. If a decision to build a commercial fast reactor were taken today there would be a 14-year gap between strating this and the start of the Prototype Fast Reactor. This is already much too long. From an environmental standpoint we have to demonstrate that we can manufacture and reprocess fast reacctor fuel for a substantial programme in a way that does not lead to pollution of the environment, and that plutonium-containing fuel can be transported in the quantities required in safety and in a way that does not attract terrorists or require a private army to ensure its security. Finally, we have to find a way to allow many countries to obtain the energy they need from fast reactors, without leading to the proliferation of nuclear weapons or weapons capability. (author)

  2. Fast reactor fuel reprocessing in the UK

    International Nuclear Information System (INIS)

    Allardice, R.H.; Williams, J.; Buck, C.

    1977-01-01

    Enriched uranium metal fuel irradiated in the Dounreay Fast Reactor has been reprocessed and refabricated in plants specifically designed for the purpose in the U.K. since 1961. Efficient and reliable fuel recycle is essential to the development of a plutonium based fast reactor system and the importance of establishing at an early stage fast reactor fuel reprocessing has been reinforced by current world difficulties in reprocessing high burn-up thermal reactor oxide fuel. In consequence, the U.K. has decided to reprocess irradiated fuel from the 250 MW(E) Prototype Fast Reactor as an integral part of the fast reactor development programme. Flowsheet and equipment development work for the small scale fully active demonstration plant have been carried out over the past 5 years and the plant will be commissioned and ready for active operation during 1977. In parallel, a comprehensive waste management system has been developed and installed. Based on this development work and the information which will arise from active operation of the plant a parallel development programme has been initiated to provide the basis for the design of a large scale fast reactor fuel reprocessing plant to come into operation in the late 1980s to support the projected U.K. fast reactor installation programme. The paper identifies the important differences between fast reactor and thermal reactor fuel reprocessing technologies and describes some of the development work carried out in these areas for the small scale P.F.R. fuel reprocessing operation. In addition, the development programme in aid of the design of a larger scale fast reactor fuel reprocessing plant is outlined and the current design philosophy is discussed

  3. Euratom contributions in Fast Reactor research programmes

    International Nuclear Information System (INIS)

    Fanghänel, Th.; Somers, J.

    2013-01-01

    The Sustainable Nuclear Initiative: • demonstrate long-term sustainability of nuclear energy; • demonstration reactors of Gen IV: •more efficient use of resources; • closed fuel cycle; • reduced proliferation risks; • enhanced safety features. • Systems pursued in Europe: • Sodium-cooled fast reactor SFR; • Lead-cooled fast reactor LFR; • Gas-cooled fast reactor GFR. Sustainable Nuclear Energy Technology Platform SNE-TP promotes research, development and demonstration of the nuclear fission technologies necessary to achieve the SET-Plan goals

  4. Fast magnetic resonance imaging in spinal trauma

    International Nuclear Information System (INIS)

    Silberstein, M.; McLean, K.

    1995-01-01

    In a prospective comparison between fast magnetic resonance imaging (MRI) sequences and conventional spin-echo in a series of 20 patients, gradient-echo imaging was found to be inferior to spin-echo, especially in the visualization of: spinal cord oedema, and the use of a rapid spin-echo sequence was limited by inferior visualization of hemorrhage. While the use of a combination of these two fast imaging techniques resulted in equivalent results to conventional spin-echo, the increased imaging time suggests that fast MRI cannot, as yet, replace conventional spin-echo techniques in acute spinal trauma. 15 refs., 3 tabs., 5 figs

  5. Some questions and answers concerning fast reactors

    International Nuclear Information System (INIS)

    Marshall, W.

    1980-01-01

    The theme of the lecture is the place of the fast reactor in an evolving nuclear programme. The whole question of plutonium is first considered, ie its method of production and the ways in which it can be used in the fast reactor fuel cycle. Whether fast reactors are necessary is then discussed. Their safety is examined with particular attention to those design features which are most criticised ie high volumetric power density of the core, and the use of liquid sodium as coolant. Attention is then paid to environmental and safeguard aspects. (U.K.)

  6. The Adverse Effects and Treatment Results of Smoking Cessation Pharmacotherapy During Fasting/Non-Fasting State.

    Science.gov (United States)

    Iliaz, Sinem; Tural Onur, Seda; Uysal, Mehmet Atilla; Chousein, Efsun Gonca Uğur; Tanriverdi, Elif; Bagci, Belma Akbaba; Bahadir, Ayse; Hattatoglu, Didem Gorgun; Ortakoylu, Mediha Gonenc; Yurt, Sibel

    2017-07-03

    Cigarette smoking is one of the most common addictions worldwide. Muslim smokers reduce the number of cigarettes they smoke during Ramadan due to the long fasting hours. We aimed to share our experience in a smoking cessation clinic during Ramadan by analyzing the efficacy and adverse effects of once-daily dosing of bupropion or varenicline in a fasting group compared with conventional dosing in a non-fasting group. We analyzed 57 patients who attended our smoking cessation clinic during Ramadan of 2014 and 2015, and at least one follow-up visit. For the fasting patients, we prescribed bupropion or varenicline after dinner (once daily) as the maintenance therapy. We recorded demographic characteristics of the patients, fasting state, drugs taken for smoking cessation, and the dosage of the medication. At the first follow-up visit, adverse effects seen with the treatment were recorded. We conducted telephone interviews 6 months after the first visits of the patients to learn the current smoking status of the groups. Of the total 57 patients, 20 (35.1%) were fasting and 37 (64.9%) were not fasting. Fasting and non-fasting patients were similar for sex, age, smoking pack-years, marital status, educational status, and mean Fagerström scores (p >.05). Adverse effects and quit rates after 6 months of follow-up were similar between the fasting and non-fasting groups (p >.05). Although our sample size was small, we found no difference in the rates of adverse effects or smoking cessation using a single daily oral dose of bupropion or varenicline between a fasting group and a non-fasting group that received conventional dosing.

  7. Melt-spun shaped fibers with enhanced surface effects: fiber fabrication, characterization and application to woven scaffolds.

    Science.gov (United States)

    Park, S J; Lee, B-K; Na, M H; Kim, D S

    2013-08-01

    Scaffolds with a high surface-area-to-volume ratio (SA:V) are advantageous with regard to the attachment and proliferation of cells in the field of tissue engineering. This paper reports on the development of novel melt-spun fibers with a high SA:V, which enhanced the surface effects of a fiber-based scaffold while maintaining its mechanical strength. The cross-section of the fibers was altered to a non-circular shape, producing a higher SA:V for a similar cross-sectional area. To obtain fibers with non-circular cross-sectional shape, or shaped fibers, three different types of metal spinnerets were fabricated for the melt-spinning process, each with circular, triangular or cruciform capillaries, using deep X-ray lithography followed by nickel electroforming. Using these spinnerets, circular and shaped fibers were manufactured with biodegradable polyester, polycaprolactone. The SA:V increase in the shaped fibers was experimentally investigated under different processing conditions. Tensile tests on the fibers and indentation tests on the woven fiber scaffolds were performed. The tested fibers and scaffolds exhibited similar mechanical characteristics, due to the similar cross-sectional area of the fibers. The degradation of the shaped fibers was notably faster than that of circular fibers, because of the enlarged surface area of the shaped fibers. The woven scaffolds composed of the shaped fibers significantly increased the proliferation of human osteosarcoma MG63 cells. This approach to increase the SA:V in shaped fibers could be useful for the fabrication of programmable, biodegradable fiber-based scaffolds in tissue engineering. Copyright © 2013 Acta Materialia Inc. All rights reserved.

  8. Islamic fasting and oral health and diseases

    Directory of Open Access Journals (Sweden)

    A Javadzadeh Blouri

    2014-12-01

    Full Text Available Fasting is a religious obligation, which can be challenging for individuals with oral conditions due to its stringent code of conduct. Moreover, food abstinence during fasting can restrict oral feeding even further in patients whose nutrition has been already compromised. Previous research has mainly concentrated on oral hygiene and gum health, disregarding orodental conditions and diseases. This highlights the importance of further research in this regard. In this paper, we intended to clarify the correlation between fasting and oral injections, bleeding following tooth extraction, and brushing to overcome common misconceptions which indicate the breach of religious disciplines under such circumstances. We also aimed to determine the grave effects of fasting on health in case of severe immunological deficiencies, chronic oral ulcers and certain drug administration protocols for those with rigid religious beliefs.

  9. ITER Fast Ion Collective Thomson Scattering

    DEFF Research Database (Denmark)

    Bindslev, Henrik; Larsen, Axel Wright; Meo, Fernando

    2005-01-01

    The EFDA Contract 04-1213 with Risø National Laboratory concerning a detailed integrated design of a Fast Ion Collective Thomson Scattering (CTS) diagnostic for ITER was signed on 31 December 2004. In 2003 the Risø CTS group finished a feasibility study and a conceptual design of an ITER Fast Ion...... Collective Thomson Scattering System (Contract 01.654) [1, 2]. The purpose of the CTS diagnostic is to measure the distribution function of fast ions in the plasma. The feasibility study demonstrated that the only system that can fully meet the ITER measurement requirements for confined fusion alphas is a 60...... GHz system. The study showed that with two powerful microwave sources of this frequency (gyrotron) and two antenna systems, one on the low field side (LFS) and one on the high field side (HFS), it should be possible to resolve the distribution function of fast ions both for perpendicular and parallel...

  10. Fast All-Season Soil STrength (FASST)

    National Research Council Canada - National Science Library

    Frankenstein, Susan; Koenig, George G

    2004-01-01

    ... (Fast All-season Soil STrength) was developed. It calculates the ground's moisture content, ice content, temperature, and freeze/thaw profiles, as well as soil strength and surface ice and snow accumulation/depletion...

  11. Upgrading the ATLAS fast calorimeter simulation

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00032940; The ATLAS collaboration

    2016-01-01

    Many physics and performance studies with the ATLAS detector at the Large Hadron Collider require very large samples of simulated events, and producing these using the full GEANT4 detector simulation is highly CPU intensive. Often, a very detailed detector simulation is not needed, and in these cases fast simulation tools can be used to reduce the calorimeter simulation time. In ATLAS, a fast simulation of the calorimeter systems was developed, called Fast Calorimeter Simulation (FastCaloSim). It provides a parametrized simulation of the particle energy response at the calorimeter read-out cell level. It is interfaced to the standard ATLAS digitization and reconstruction software, and can be tuned to data more easily than with GEANT4. An improved parametrization is being developed, to eventually address shortcomings of the original version. It makes use of statistical techniques such as principal component analysis, and a neural network parametrization to optimise the amount of information to store in the ATL...

  12. Fast ion loss diagnostic plans for NSTX

    International Nuclear Information System (INIS)

    Darrow, D. S.; Bell, R.; Johnson, R.; Kugel, H.; Wilson, J. R.; Cecil, F. E.; Maingi, R.; Krasilnikov, A.; Alekseyev, A.

    2000-01-01

    The prompt loss of neutral beam ions from the National Spherical Torus Experiment (NSTX) is expected to be between 12% and 42% of the total 5 MW of beam power. There may, in addition, be losses of fast ions arising from high harmonic fast wave (HHFW) heating. Most of the lost ions will strike the HHFW antenna or the neutral beam dump. To measure these losses in the 2000 experimental campaign, thermocouples in the antenna, several infrared camera views, and a Faraday cup lost ion probe will be employed. The probe will measure loss of fast ions with E > 1 keV at three radial locations, giving the scrape-off length of the fast ions

  13. Slow and Fast Light, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — In response to the NASA Small Business Innovation Research (SBIR) Program 2015 Phase I Solicitation S3.08: Slow and Fast Light, Torch Technologies in partnership...

  14. 400 Area/Fast Flux Test Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The 400 Area at Hanford is home primarily to the Fast Flux Test Facility (FFTF), a DOE-owned, formerly operating, 400-megawatt (thermal) liquid-metal (sodium)-cooled...

  15. Waves from Propulsion Systems of Fast Ferries

    DEFF Research Database (Denmark)

    Taatø, Søren Haugsted; Aage, Christian; Arnskov, Michael M.

    1998-01-01

    generated by the ship hulls alone. Whereas this assumption may be reasonable for conventional ships with large hulls and limited propulsive power, the situation is different for fast ferries with their smaller hulls and very large installed power. A simple theoretical model and a series of model tests......Waves from fast ferries have become an environmental problem of growing concern to the public. Fast ferries produce not only higher waves than conventional ships but also fundamentally different wave systems when they sail at supercritical speeds. Hitherto, ship waves have been considered as being...... on a monohull fast ferry seem to indicate that a substantial part of the wave-making can be directly attributed to the propulsion system itself. Thus, two wave systems are created with different phases, but with similar frequency contents, which means that they merge into one system behind the ship, very...

  16. Fast and Statistically Efficient Fundamental Frequency Estimation

    DEFF Research Database (Denmark)

    Nielsen, Jesper Kjær; Jensen, Tobias Lindstrøm; Jensen, Jesper Rindom

    2016-01-01

    Fundamental frequency estimation is a very important task in many applications involving periodic signals. For computational reasons, fast autocorrelation-based estimation methods are often used despite parametric estimation methods having superior estimation accuracy. However, these parametric...

  17. FAST-TRAC evaluation : evaluation summary report

    Science.gov (United States)

    FAST-TRAC is an Intelligent Transportation System (ITS) that integrates advanced traffic control with a variety of advanced traffic information systems through centralized collection, processing, and dissemination of traffic data. The Road Commission...

  18. Safeguards challenges of Fast Breeder Reactor

    International Nuclear Information System (INIS)

    Ko, H. S.

    2010-01-01

    Although the safeguards system of Sodium Fast Reactor (SFR) seems similar to that of Light Water Reactor (LWR), it was raised safeguards challenges of SFR that resulted from the visual opacity of liquid sodium, chemical reactivity of sodium and other characteristics of fast reactor. As it is the basic concept stage of the safeguards of SFR in Korea, this study tried to analyze the latest similar study of safeguards issues of the Fast Breeder Reactor (FBR) at Joyo and Monju in Japan. For this reason, this study is to introduce some potential safeguards challenges of Fast Breeder Reactor. With this analysis, future study could be to address the safeguards challenges of SFR in Korea

  19. Upgrading the Fast Calorimeter Simulation in ATLAS

    CERN Document Server

    Schaarschmidt, Jana; The ATLAS collaboration

    2017-01-01

    The tremendous need for simulated samples now and even more so in the future, encourage the development of fast simulation techniques. The Fast Calorimeter Simulation is a faster though less accurate alternative to the full calorimeter simulation with Geant4. It is based on parametrizing the longitudunal and lateral energy deposits of single particles in the ATLAS calorimeter. Principal component analysis and machine learning techniques are used to improve the performance and decrease the memory need compared to the current version of the ATLAS Fast Calorimeter Simulation. The parametrizations are expanded to cover very high energies and very forward detector regions, to increase the applicability of the tool. A prototype of this upgraded Fast Calorimeter Simulation has been developed and first validations with single particles show substantial improvements over the previous version.

  20. Fast Picometer Mirror Mount, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed innovation is a 6DOF controllable mirror mount with high dynamic range and fast tip/tilt capability for space based applications. It will enable the...

  1. Fast reactor fuel design and development

    International Nuclear Information System (INIS)

    Bishop, J.F.W.; Chamberlain, A.; Holmes, J.A.G.

    1977-01-01

    Fuel design parameters for oxide and carbide fast reactor fuels are reviewed in the context of minimising the total uranium demands for a combined thermal and fast reactor system. The major physical phenomena conditioning fast reactor fuel design, with a target of high burn-up, good breeding and reliable operation, are characterised. These include neutron induced void swelling, irradiation creep, pin failure modes, sub-assembly structural behaviour, behaviour of defect fuel, behaviour of alternative fuel forms. The salient considerations in the commercial scale fabrication and reprocessing of the fuels are reviewed, leading to the delineation of possible routes for the manufacture and reprocessing of Commercial Reactor fuel. From the desiderata and restraints arising from Surveys, Performance and Manufacture, the problems posed to the Designer are considered, and a narrow range of design alternatives is proposed. The paper concludes with a consideration of the development areas and the conceptual problems for fast reactors associated with those areas

  2. FastBit: Interactively Searching Massive Data

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Kesheng; Ahern, Sean; Bethel, E. Wes; Chen, Jacqueline; Childs, Hank; Cormier-Michel, Estelle; Geddes, Cameron; Gu, Junmin; Hagen, Hans; Hamann, Bernd; Koegler, Wendy; Lauret, Jerome; Meredith, Jeremy; Messmer, Peter; Otoo, Ekow; Perevoztchikov, Victor; Poskanzer, Arthur; Prabhat,; Rubel, Oliver; Shoshani, Arie; Sim, Alexander; Stockinger, Kurt; Weber, Gunther; Zhang, Wei-Ming

    2009-06-23

    As scientific instruments and computer simulations produce more and more data, the task of locating the essential information to gain insight becomes increasingly difficult. FastBit is an efficient software tool to address this challenge. In this article, we present a summary of the key underlying technologies, namely bitmap compression, encoding, and binning. Together these techniques enable FastBit to answer structured (SQL) queries orders of magnitude faster than popular database systems. To illustrate how FastBit is used in applications, we present three examples involving a high-energy physics experiment, a combustion simulation, and an accelerator simulation. In each case, FastBit significantly reduces the response time and enables interactive exploration on terabytes of data.

  3. Nonfasting Versus Initial Fasting Ketogenic Diet

    Directory of Open Access Journals (Sweden)

    J Gordon Millichap

    2005-02-01

    Full Text Available A retrospective evaluation of the ketogenic diet (KD was conducted comparing efficacy and tolerability of the diet with or without initial fasting and fluid restriction and involving university centers in Seoul, Korea.

  4. Slow and fast light in semiconductor waveguides

    DEFF Research Database (Denmark)

    Mørk, Jesper; Hansen, Per Lunnemann; Xue, Weiqi

    2010-01-01

    transparency and coherent population oscillations. While electromagnetically induced transparency has been the most important effect in realizing slowdown effects in atomic gasses, progress has been comparatively slow in semiconductors due to inherent problems of fast dephasing times and inhomogeneous...

  5. The fast reactor and energy supply

    International Nuclear Information System (INIS)

    1979-01-01

    The progress made with fast reactor development in many countries is summarised showing that the aim is to provide to the nation concerned an ability to instal fast reactor power stations at the end of this century or early in the next one. Accepting the importance of fast reactors as a potential independent source of energy, problems concerning economics, industrial capability, technical factors, public acceptibility and in particular plutonium management, are discussed. It is concluded that although fast reactors have reached a comparatively advanced stage of development, a number of factors make it likely that their introduction for electricity generation will be a gradual process. Nevertheless it is necessary to complete demonstration and development phases in good time. (U.K.)

  6. Fast Food Combos Make Type A Lunches

    Science.gov (United States)

    Stashower, Gloria

    1974-01-01

    Clark County school district in Las Vegas, Nevada, has combination lunches available for high school students that meet Type A nutrition requirements but which resemble the commercial fast food menus teenagers prefer. (MLF)

  7. Electrical resistivity of fast neutron irradiated bismuth

    International Nuclear Information System (INIS)

    Quelard, G.

    1975-01-01

    The production and recovery of fast neutron radiation damage in bismuth, at 20K has been studied by means of electrical resistivity. Results are independent of crystallographic orientation and indicate a creation of carriers during irradiation [fr

  8. Fast-track revision knee arthroplasty

    DEFF Research Database (Denmark)

    Husted, Henrik; Otte, Niels Kristian Stahl; Kristensen, Billy B

    2011-01-01

    Abstract Background and purpose Fast-track surgery has reduced the length of hospital stay (LOS), morbidity, and convalescence in primary hip and knee arthroplasty (TKA). We assessed whether patients undergoing revision TKA for non-septic indications might also benefit from fast-track surgery....... Methods 29 patients were operated with 30 revision arthroplasties. Median age was 67 (34-84) years. All patients followed a standardized fast-track set-up designed for primary TKA. We determined the outcome regarding LOS, morbidity, mortality, and satisfaction. Results Median LOS was 2 (1-4) days...... undergoing revision TKA for non-septic reasons may be included in fast-track protocols. Outcome appears to be similar to that of primary TKA regarding LOS, morbidity, and satisfaction. Our findings call for larger confirmatory studies and studies involving other indications (revision THA, 1-stage septic...

  9. Sociodemographic differences in fast food price sensitivity

    Science.gov (United States)

    Meyer, Katie A.; Guilkey, David K.; Ng, Shu Wen; Duffey, Kiyah J.; Popkin, Barry M.; Kiefe, Catarina I.; Steffen, Lyn M.; Shikany, James M.; Gordon-Larsen, Penny

    2014-01-01

    Importance Fiscal food policies (e.g., taxation) are increasingly proposed to improve population-level health, but their impact on health disparities is unknown. Objective We estimated subgroup-specific effects of fast food price changes on fast food consumption and cardio-metabolic outcomes, hypothesizing inverse associations between fast food price with fast food consumption, BMI, and insulin resistance and stronger associations among blacks (vs. whites) and participants with relatively lower education or income. Design 20-year follow-up (5 exams) in a biracial U.S. prospective cohort: Coronary Artery Risk Development in Young Adults (CARDIA) (1985/86–2005/06, baseline n=5,115). Participants Aged 18–30 at baseline; designed for equal recruitment by race (black/white), educational attainment, age, and gender. Exposures Community-level price data from the Council for Community and Economic Research (C2ER) temporally- and geographically-linked to study participants’ home address at each exam. Main outcome and measures Participant-reported number of fast food eating occasions per week; BMI (kg/m2) from clinical assessment of weight and height; homeostatic model assessment insulin resistance (HOMA-IR) from fasting glucose and insulin. Covariates included individual- and community-level social and demographic factors. Results In repeated measures regression, multivariable-adjusted associations between fast food price and consumption were non-linear (quadratic, pconsumption at higher prices; estimates varied according to race (interaction term p=0.04), income (p=0.07), and education (p=0.03). For example, at the 10th percentile of price ($1.25/serving), blacks and whites had mean fast food consumption (times/week) of 2.2 (95% CI: 2.1–2.3) and 1.6 (1.5–1.7), respectively, while at the 90th percentile of price ($1.53/serving), respective mean consumption estimates were 1.9 (1.8–2.0) and 1.5 (1.4–1.6). We observed differential price effects on HOMA

  10. Transmutation of Americium in Fast Neutron Facilities

    OpenAIRE

    Zhang, Youpeng

    2011-01-01

    In this thesis, the feasibility to use a medium sized sodium cooled fast reactor fully loaded with MOX fuel for efficient transmutation of americium is investigated by simulating the safety performance of a BN600-type fast reactor loaded with different fractions of americium in the fuel, using the safety parameters obtained with the SERPENT Monte Carlo code. The focus is on americium mainly due to its long-term contribution to the radiotoxicity of spent nuclear fuel and its deterioration on c...

  11. Personal Factors and Fast Food Consumption

    OpenAIRE

    Saraniya Devendra

    2016-01-01

    Asian peoples including Sri Lankans are generally fond of cooking food items in their homes. It is understandable that on the other hand, growing knowledge and adoption of western culture bring a modification in food consumption pattern among Sri Lankan families who lives in a particular city area. As such, it is useful to identify the Personal Factors (PF) that influence on Fast Food Consumption (FFC), since the Sri Lankans change their behavior to have fast foods of developed countries from...

  12. Fast Access Data Acquisition System (FADAS)

    International Nuclear Information System (INIS)

    Katsman, Vladimir

    1998-01-01

    Our goal in this program is to develop Fast Access Data Acquisition System (FADAS) by combining the flexibility of Multilink's GaAs and InP electronics and electro-optics with an extremely high data rate for the efficient handling and transfer of collider experimental data. This novel solution is based on Multilink's and Los Alamos National Laboratory's (LANL) unique components and technologies for extremely fast data transfer, storage, and processing

  13. Surgery simulation using fast finite elements

    DEFF Research Database (Denmark)

    Bro-Nielsen, Morten

    1996-01-01

    This paper describes our recent work on real-time surgery simulation using fast finite element models of linear elasticity. In addition, we discuss various improvements in terms of speed and realism......This paper describes our recent work on real-time surgery simulation using fast finite element models of linear elasticity. In addition, we discuss various improvements in terms of speed and realism...

  14. General remarks on fast neutron reactor physics

    International Nuclear Information System (INIS)

    Barre, J.Y.

    1980-01-01

    The main aspects of fast reactor physics, presented in these lecture notes, are restricted to LMFBR's. The emphasis is placed on the core neutronic balance and the burn-up problems. After a brief description of the power reactor main components and of the fast reactor chronology, the fundamental parameters of the one-group neutronic balance are briefly reviewed. Then the neutronic burn-up problems related to the Pu production and to the doubling time are considered

  15. Universal Fast Breeder Reactor Subassembly Counter manual

    Energy Technology Data Exchange (ETDEWEB)

    Menlove, H.O.; Eccleston, G.W.; Swansen, J.E.; Goris, P.; Abedin-Zadeh, R.; Ramalho, A.

    1984-08-01

    A neutron coincidence counter has been designed for the measurement of fast breeder reactor fuel assemblies. This assay system can accommodate the full range of geometries and masses found in fast breeder subassemblies under IAEA safeguards. The system's high-performance capability accommodates high plutonium loadings of up to 16 kg. This manual describes the system and its operation and gives performance and calibration parameters for typical applications.

  16. Universal Fast Breeder Reactor Subassembly Counter manual

    International Nuclear Information System (INIS)

    Menlove, H.O.; Eccleston, G.W.; Swansen, J.E.; Goris, P.; Abedin-Zadeh, R.; Ramalho, A.

    1984-08-01

    A neutron coincidence counter has been designed for the measurement of fast breeder reactor fuel assemblies. This assay system can accommodate the full range of geometries and masses found in fast breeder subassemblies under IAEA safeguards. The system's high-performance capability accommodates high plutonium loadings of up to 16 kg. This manual describes the system and its operation and gives performance and calibration parameters for typical applications

  17. The behaviour of materials in fast reactors

    International Nuclear Information System (INIS)

    Matthews, J.R.

    1977-01-01

    Fast neutron damage in fast reactors can limit the life of structural components through the growth voids. The main features of the current theory of point defect production and condensation are surveyed. The role of metallurgical structures and radiation produced extended defects is outlined and used to demonstrate the development of volume swelling and radiation hardening. Mechanisms of radiation creep are described in the context of the preceding treatment of point defect behaviour. Finally, future trends in the field are briefly explored. (author)

  18. Concept and Canons of Fasting in Ayurveda

    OpenAIRE

    H Shripathi Adiga; Ramya S Adiga

    2013-01-01

    Ayurveda, manoeuvres mankind to head a healthy life in order to pursue four-fold bliss. With a view to combat physical and mental annoyances, classics have explicated two-fold therapeutic modalities; langhana/depletion and brihmana/nourishing. Upavasa /fasting is one among ten depletion therapies explained. It is envisioned at all three levels of Ayurvedic therapies- rational/objectively planned, psychological, and spiritual. Fasting is reckoned to be refraining from all forms of food intake ...

  19. Fasting with diabetes: a prospective observational study

    Science.gov (United States)

    Noon, Muhammad Jawad; Khawaja, Haseeb Ahmad; Ishtiaq, Osama; Khawaja, Quratulain; Minhas, Sana; Niazi, Asfandyar Khan; Minhas, Abdul Mannan Khan; Malhi, Umar Rasool

    2016-01-01

    Objectives To determine the proportion of diabetic patients who develop adverse glycaemic events when fasting regularly. Design Prospective observational study conducted at a tertiary care hospital in South Asia. Five hundred and twenty-three patients were assessed for eligibility, and 150 were included in the final analysis. Diabetic patients over 18 years of age who were willing to fast regularly and make a chart of their daily blood sugar levels were included in the study. The main outcome measures were hypoglycaemic and hyperglycaemic events. Frequencies and percentages were calculated for quantitative variables, while mean±SD were documented for qualitative variables. Relative risk was calculated as a measure of association. Results Of a total of 150 individuals, 10% experienced hypoglycaemia, while 3.3% reported hyperglycaemic episodes. Only 8.7% of the participants discontinued one or more fasts; however, none of them required hospitalisation. There is a negative association between a visit to a physician by diabetic patients before they begin to fast regularly and the risk of developing hypoglycaemia (relative risk 0.73). Conclusions Many diabetic patients who fast regularly are at high risk of adverse glycaemic events. Most diabetics do not consult their physicians before fasting to adjust medications and lifestyle. Various strategies should be planned and implemented for the awareness and education of such patients to avoid adverse glycaemic events and subsequent complications. PMID:28588932

  20. Fasting guidelines for diabetic children and adolescents

    Directory of Open Access Journals (Sweden)

    Kiswhar Azad

    2012-01-01

    Full Text Available Fasting during the month of Ramadan, the ninth month of Islamic lunar calendar, is obligatory for all healthy adult and adolescent Muslims from the age of 12 years. Fasting starts from early dawn (Sohur/Sehri till sunset (Iftar. During this period one has to abstain from eating and drinking. Islam has allowed many categories of people to be exempted from fasting, for example, young children, travelers, the sick, the elderly, pregnant, and lactating women. According to expert opinion, patients with type 1 diabetes (type 1 DM who fast during Ramadan are at a very high risk to develop adverse events. However, some experienced physicians are of the opinion that fasting during Ramadan is safe for type 1 DM patients, including adolescents and older children, with good glycemic control who do regular self-monitoring and are under close professional supervision. The strategies to ensure safety of type 1 diabetic adolescents who are planning to fast include the following: Ramadan-focused medical education, pre-Ramadan medical assessment, following a healthy diet and physical activity pattern, modification in insulin regimen, and blood glucose monitoring as advised by the physician.

  1. ITER prototype fast plant system controller

    Energy Technology Data Exchange (ETDEWEB)

    Goncalves, B., E-mail: bruno@ipfn.ist.utl.pt [Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P-1049-001 Lisboa (Portugal); Sousa, J.; Carvalho, B.B.; Rodrigues, A.P.; Correia, M.; Batista, A. [Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P-1049-001 Lisboa (Portugal); Vega, J. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas, CIEMAT, Av. Complutense, Madrid (Spain); Ruiz, M.; Lopez, J.M. [Grupo de Investigacion en Instrumentacion y Acustica Aplicada, Universidad Politecnica de Madrid (Spain); Castro, R. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas, CIEMAT, Av. Complutense, Madrid (Spain); Wallander, A.; Utzel, N.; Makijarvi, P.; Simrock, S. [ITER Organization, CS 90 046, 13067 St. Paul lez Durance Cedex (France); Neto, A.; Alves, D.; Valcarcel, D.F. [Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P-1049-001 Lisboa (Portugal); Lousa, P.; Piedade, F.; Fernandes, L. [INOV, Lisbon (Portugal)

    2011-10-15

    ITER CODAC Design identified the need for slow and fast control plant systems, based respectively on industrial automation technology with maximum sampling rates below 100 Hz, and on embedded technology with higher sampling rates and more stringent real-time requirements. The fast system is applicable to diagnostics and plant systems in closed-control loops whose cycle times are below 1 ms. Fast controllers will be dedicated industrial controllers with the ability to supervise other fast and/or slow controllers, interface to actuators and sensors and high performance networks (HPN). This contribution presents the engineering design of two prototypes of a fast plant system controller (FPSC), specialized for data acquisition, constrained by ITER technological choices. This prototyping activity contributes to the Plant Control Design Handbook (PCDH) effort of standardization, specifically regarding fast controller characteristics. The prototypes will be built using two different form factors, PXIe and ATCA, with the aim of comparing the implementations. The presented solution took into consideration channel density, synchronization, resolution, sampling rates and the needs for signal conditioning such as filtering and galvanic isolation. The integration of the two controllers in the standard CODAC environment is also presented and discussed. Both controllers contain an EPICS IOC providing the interface to the mini-CODAC which will be used for all testing activities. The alpha version of the FPSC is also presented.

  2. ITER prototype fast plant system controller

    International Nuclear Information System (INIS)

    Goncalves, B.; Sousa, J.; Carvalho, B.B.; Rodrigues, A.P.; Correia, M.; Batista, A.; Vega, J.; Ruiz, M.; Lopez, J.M.; Castro, R.; Wallander, A.; Utzel, N.; Makijarvi, P.; Simrock, S.; Neto, A.; Alves, D.; Valcarcel, D.F.; Lousa, P.; Piedade, F.; Fernandes, L.

    2011-01-01

    ITER CODAC Design identified the need for slow and fast control plant systems, based respectively on industrial automation technology with maximum sampling rates below 100 Hz, and on embedded technology with higher sampling rates and more stringent real-time requirements. The fast system is applicable to diagnostics and plant systems in closed-control loops whose cycle times are below 1 ms. Fast controllers will be dedicated industrial controllers with the ability to supervise other fast and/or slow controllers, interface to actuators and sensors and high performance networks (HPN). This contribution presents the engineering design of two prototypes of a fast plant system controller (FPSC), specialized for data acquisition, constrained by ITER technological choices. This prototyping activity contributes to the Plant Control Design Handbook (PCDH) effort of standardization, specifically regarding fast controller characteristics. The prototypes will be built using two different form factors, PXIe and ATCA, with the aim of comparing the implementations. The presented solution took into consideration channel density, synchronization, resolution, sampling rates and the needs for signal conditioning such as filtering and galvanic isolation. The integration of the two controllers in the standard CODAC environment is also presented and discussed. Both controllers contain an EPICS IOC providing the interface to the mini-CODAC which will be used for all testing activities. The alpha version of the FPSC is also presented.

  3. The new ATLAS Fast Calorimeter Simulation

    CERN Document Server

    Hasib, Ahmed; The ATLAS collaboration

    2017-01-01

    Producing the very large samples of simulated events required by many physics and performance studies with the ATLAS detector using the full GEANT4 detector simulation is highly CPU intensive. Fast simulation tools are a useful way of reducing CPU requirements when detailed detector simulations are not needed. During the LHC Run-1, a fast calorimeter simulation (FastCaloSim) was successfully used in ATLAS. FastCaloSim provides a simulation of the particle energy response at the calorimeter read-out cell level, taking into account the detailed particle shower shapes and the correlations between the energy depositions in the various calorimeter layers. It is interfaced to the standard ATLAS digitization and reconstruction software, and it can be tuned to data more easily than GEANT4. Now an improved version of FastCaloSim is in development, incorporating the experience with the version used during Run-1. The new FastCaloSim makes use of statistical techniques such as principal component analysis, and a neural n...

  4. The New ATLAS Fast Calorimeter Simulation

    CERN Document Server

    Heath, Matthew Peter; The ATLAS collaboration

    2017-01-01

    Producing the large samples of simulated events required by many physics and performance studies with the ATLAS detector using the full GEANT4 detector simulation is highly CPU intensive. Fast simulation tools are a useful way of reducing the CPU requirements when detailed detector simulations are not needed. During Run-1 of the LHC, a fast calorimeter simulation (FastCaloSim) was successfully used in ATLAS. FastCaloSim provides a simulation of the particle energy response at the calorimeter read-out cell level, taking into account the detailed particle shower shapes and the correlations between the energy depositions in the various calorimeter layers. It is interfaced to the standard ATLAS digitisation and reconstruction software, and it can be tuned to data more easily than Geant4. Now an improved version of FastCaloSim is in development, incorporating the experience with the version used during Run-1. The new FastCaloSim aims to overcome some limitations of the first version by improving the description of...

  5. Fast ultrasonic visualisation under sodium. Application to the fast neutron reactors

    International Nuclear Information System (INIS)

    Imbert, Ch.

    1997-01-01

    The fast ultrasonic visualization under sodium is in the programme of research and development on the inspection inside the fast neutron reactors. This work is about the development of a such system of fast ultrasonic imaging under sodium, in order to improve the existing visualization systems. This system is based on the principle of orthogonal imaging, it uses two linear antennas with an important dephasing having 128 piezo-composite elements of central frequency equal to 1.6 MHz. (N.C.)

  6. Fast neutron radiography using photoluminescent imaging plates

    International Nuclear Information System (INIS)

    Rant, J.; Kristof, E.; Balasko, M.; Stade, J.

    1999-01-01

    Fast neutron radiography (FNR) and resonance neutron radiography (RNR) are complementary to the conventional radiography with high energy gamma-rays or brems-strahlung radiation used for the inspection of thick metal objects. In both non-destructive methods, the contrast sensitivity and the penetration power can be improved by using higher energy neutrons. At present direct techniques based either n Solid State Nuclear Track detectors (SSNTDs) or scintillating screens and transfer techniques using activation threshold detectors and radiographic films are applied for the detection of fast neutron images. Rather low detection sensitivity of film and SSNTD based fast neutron imaging methods and also rather poor inherent image contrast of SSNTD pose a problem for FNR in the fast neutron energy region 1-15 MeV interesting for NDT. For more efficient detection of fast neutron images the use of novel highly sensitive photoluminescent imaging plates (IP) in combination with threshold at the KFKI research reactor. The conventional IP produced by FUJI Photo Film Co. for the detection of beta and X-ray radiation were used. The threshold activation detectors were the reactions 115 In(n, n') 115m In, 64 Zn(n,p) 64 Cu, 56 Fe(n, p) 56 Mn, 24 Mg(n, p) 24 Na and 27 Al(n, α) 24 Na. These threshold reactions cover the fast neutron energy region between 0,7 MeV and 12 MeV. Pure, commercially available metals 0,1 mm to 0,25 mm thick made of In, Zn, Fe, Mg and Al were used as converter screens. The very high sensitivity of IP, the linearity of their response over 5 decades of exposure dose and the high dynamic digitalisation latitude enabled fast neutron radiography of image quality comparable to the quality of thermal NR. In our experimental conditions (φ n ∼ 10 8 n/cm 2 s, R Cd ∼ 2) the neutron exposure and IP exposure periods were still practical and comparable to the half life of the corresponding reaction products (half an hour to several hours). Even with the 27 Al(n.α) 24

  7. Stationary Liquid Fuel Fast Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Won Sik [Purdue Univ., West Lafayette, IN (United States); Grandy, Andrew [Argonne National Lab. (ANL), Argonne, IL (United States); Boroski, Andrew [Argonne National Lab. (ANL), Argonne, IL (United States); Krajtl, Lubomir [Argonne National Lab. (ANL), Argonne, IL (United States); Johnson, Terry [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-09-30

    For effective burning of hazardous transuranic (TRU) elements of used nuclear fuel, a transformational advanced reactor concept named SLFFR (Stationary Liquid Fuel Fast Reactor) was proposed based on stationary molten metallic fuel. The fuel enters the reactor vessel in a solid form, and then it is heated to molten temperature in a small melting heater. The fuel is contained within a closed, thick container with penetrating coolant channels, and thus it is not mixed with coolant nor flow through the primary heat transfer circuit. The makeup fuel is semi- continuously added to the system, and thus a very small excess reactivity is required. Gaseous fission products are also removed continuously, and a fraction of the fuel is periodically drawn off from the fuel container to a processing facility where non-gaseous mixed fission products and other impurities are removed and then the cleaned fuel is recycled into the fuel container. A reference core design and a preliminary plant system design of a 1000 MWt TRU- burning SLFFR concept were developed using TRU-Ce-Co fuel, Ta-10W fuel container, and sodium coolant. Conservative design approaches were adopted to stay within the current material performance database. Detailed neutronics and thermal-fluidic analyses were performed to develop a reference core design. Region-dependent 33-group cross sections were generated based on the ENDF/B-VII.0 data using the MC2-3 code. Core and fuel cycle analyses were performed in theta-r-z geometries using the DIF3D and REBUS-3 codes. Reactivity coefficients and kinetics parameters were calculated using the VARI3D perturbation theory code. Thermo-fluidic analyses were performed using the ANSYS FLUENT computational fluid dynamics (CFD) code. Figure 0.1 shows a schematic radial layout of the reference 1000 MWt SLFFR core, and Table 0.1 summarizes the main design parameters of SLFFR-1000 loop plant. The fuel container is a 2.5 cm thick cylinder with an inner radius of 87.5 cm. The fuel

  8. Computational Studies and Designs for Fast Ignition

    Science.gov (United States)

    Nagatomo, H.; Johzaki, T.; Nakamura, T.; Sakagami, H.; Mima, K.

    2006-12-01

    The fast ignition scheme is one of the most fascinating and feasible ignition schemes for the inertial fusion energy. At ILE Osaka University, FIREX (Fast Ignition Realization Experiment) project is in progress. Implosion experiments of the cryogenic target are scheduled in near future. There are two key issues for the fast ignition. One is controlling the implosion dynamics to form high density core plasma in non-spherical implosion, and the other is heating the core plasma efficiently by the short pulse high intense laser. The time and space scale in the fast ignition scheme vary widely from initial laser irradiation to solid target, to relativistic laser plasma interaction and final fusion burning. The numerical simulation plays an important role in demonstrating the performance of the fast ignition, designing the targets, and optimizing laser pulse shapes for the scheme. These all the physics are desired to be self-consistently described. In order to study these physics of FI, we have developed "Fast Ignition Integrated Interconnecting code" (FI3), which consists of collective Particle-in-Cell (PIC) code (FISCOF1D/2D), Relativistic Fokker-Planck with hydro code (FIBMET), and 2-dimensional Arbitrary-Lagrangian-Eulerian (ALE) radiation hydrodynamics code (PINOCO). Those codes are sophisticated in each suitable plasma parameters, and boundaries conditions and initial conditions for them are imported/exported to each other by way of DCCP, a simple and compact communication tool which enable these codes to communicate each others under executing different machines. We show the feature of the FI3 code, and numerical results of whole process of fast ignition. Individual important physics behind the FI are explained with the numerical results also.

  9. Sociodemographic differences in fast food price sensitivity.

    Science.gov (United States)

    Meyer, Katie A; Guilkey, David K; Ng, Shu Wen; Duffey, Kiyah J; Popkin, Barry M; Kiefe, Catarina I; Steffen, Lyn M; Shikany, James M; Gordon-Larsen, Penny

    2014-03-01

    Fiscal food policies (eg, taxation) are increasingly proposed to improve population-level health, but their impact on health disparities is unknown. To estimate subgroup-specific effects of fast food price changes on fast food consumption and cardiometabolic outcomes. Twenty-year follow-up (5 examinations) in a biracial US prospective cohort: Coronary Artery Risk Development in Young Adults (CARDIA) (1985/1986-2005/2006, baseline N = 5115). Participants were aged 18 to 30 years at baseline; design indicated equal recruitment by race (black vs white), educational attainment, age, and sex. Community-level price data from the Council for Community and Economic Research were temporally and geographically linked to study participants' home address at each examination. Participant-reported number of fast food eating occasions per week, body mass index (BMI), and homeostasis model assessment insulin resistance (HOMA-IR) from fasting glucose and insulin concentrations. Covariates included individual-level and community-level social and demographic factors. In repeated measures regression analysis, multivariable-adjusted associations between fast food price and consumption were nonlinear (quadratic, P fast food consumption frequency of 2.20 (95% CI, 2.07-2.33) and 1.55 (1.45-1.65) times/wk, respectively, whereas at the 90th percentile of price ($1.53/serving), respective mean consumption estimates were 1.86 (1.75-1.97) and 1.50 (1.41-1.59) times/wk. We observed differential price effects on HOMA-IR (inverse for lower educational status only [interaction P = .005] and at middle income only [interaction P = .02]) and BMI (inverse for blacks, less education, and middle income; positive for whites, more education, and high income [all interaction P fast food price sensitivity on fast food consumption and insulin resistance among sociodemographic groups that have a disproportionate burden of chronic disease. Our findings have implications for fiscal policy, particularly with

  10. Fast-track surgery in India.

    Science.gov (United States)

    Nanavati, Aditya J; Nagral, Sanjay; Prabhakar, Subramaniam

    2014-01-01

    Fast-track surgery or 'enhanced recovery after surgery' or 'multimodal rehabilitation after surgery' is a form of protocol-based perioperative care programme. It is an amalgamation of evidence-based practices that have been proven to improve patient outcome independently and exert a synergistic effect when applied together. The philosophy is to treat the patient's pathology with minimal disturbance to the physiology. Several surgical subspecialties have now adopted such protocols with good results. The role of fast-track surgery in colorectal procedures has been well demonstrated. Its application to other major abdominal surgical procedures is not as well defined but there are encouraging results in the few studies conducted. There has been resistance to several aspects of this programme among gastrointestinal and general surgeons. There is little data from India in the available literature on the application of fast-tracking in gastrointestinal surgery. In a country such as India the existing healthcare structure stands to gain the most by widespread adoption of fast-track methods. Early discharge, early ambulation, earlier return to work and increased hospital efficiency are some of the benefits. The cost gains derived from this programme stand to benefit the patient, doctor and government as well. The practice and implementation of fast-track surgery involves a multidisciplinary team approach. It requires policy formation at an institutional level and interdepartmental coordination. More research is required in areas like implementation of such protocols across India to derive the maximum benefit from them. Copyright 2014, NMJI.

  11. The physics of fast Z pinches

    International Nuclear Information System (INIS)

    Ryutov, D.D.; Derzon, M.S.; Matzen, M.K.

    1998-07-01

    The spectacular progress made during the last few years in reaching high energy densities in fast implosions of annular current sheaths (fast Z pinches) opens new possibilities for a broad spectrum of experiments, from x-ray generation to controlled thermonuclear fusion and astrophysics. Presently Z pinches are the most intense laboratory X ray sources (1.8 MJ in 5 ns from a volume 2 mm in diameter and 2 cm tall). Powers in excess of 200 TW have been obtained. This warrants summarizes the present knowledge of physics that governs the behavior of radiating current-carrying plasma in fast Z-pinches. This survey covers essentially all aspects of the physics of fast Z pinches: initiation, instabilities of the early stage, magnetic Rayleigh-Taylor instability in the implosion phase, formation of a transient quasi-equilibrium near the stagnation point, and rebound. Considerable attention is paid to the analysis of hydrodynamic instabilities governing the implosion symmetry. Possible ways of mitigating these instabilities are discussed. Non-magnetohydrodynamic effects (anomalous resistivity, generation of particle beams, etc.) are summarized. Various applications of fast Z pinches are briefly described. Scaling laws governing development of more powerful Z pinches are presented. The survey contains 52 figures and nearly 300 references

  12. The physics of fast Z pinches

    Energy Technology Data Exchange (ETDEWEB)

    Ryutov, D.D. [Lawrence Livermore National Lab., CA (United States); Derzon, M.S.; Matzen, M.K. [Sandia National Labs., Albuquerque, NM (United States)

    1998-07-01

    The spectacular progress made during the last few years in reaching high energy densities in fast implosions of annular current sheaths (fast Z pinches) opens new possibilities for a broad spectrum of experiments, from x-ray generation to controlled thermonuclear fusion and astrophysics. Presently Z pinches are the most intense laboratory X ray sources (1.8 MJ in 5 ns from a volume 2 mm in diameter and 2 cm tall). Powers in excess of 200 TW have been obtained. This warrants summarizes the present knowledge of physics that governs the behavior of radiating current-carrying plasma in fast Z-pinches. This survey covers essentially all aspects of the physics of fast Z pinches: initiation, instabilities of the early stage, magnetic Rayleigh-Taylor instability in the implosion phase, formation of a transient quasi-equilibrium near the stagnation point, and rebound. Considerable attention is paid to the analysis of hydrodynamic instabilities governing the implosion symmetry. Possible ways of mitigating these instabilities are discussed. Non-magnetohydrodynamic effects (anomalous resistivity, generation of particle beams, etc.) are summarized. Various applications of fast Z pinches are briefly described. Scaling laws governing development of more powerful Z pinches are presented. The survey contains 52 figures and nearly 300 references.

  13. The Physics of Fast Z Pinches

    Energy Technology Data Exchange (ETDEWEB)

    RYUTOV,D.D.; DERZON,MARK S.; MATZEN,M. KEITH

    1999-10-25

    The spectacular progress made during the last few years in reaching high energy densities in fast implosions of annular current sheaths (fast Z pinches) opens new possibilities for a broad spectrum of experiments, from x-ray generation to controlled thermonuclear fusion and astrophysics. Presently Z pinches are the most intense laboratory X ray sources (1.8 MJ in 5 ns from a volume 2 mm in diameter and 2 cm tall). Powers in excess of 200 TW have been obtained. This warrants summarizing the present knowledge of physics that governs the behavior of radiating current-carrying plasma in fast Z pinches. This survey covers essentially all aspects of the physics of fast Z pinches: initiation, instabilities of the early stage, magnetic Rayleigh-Taylor instability in the implosion phase, formation of a transient quasi-equilibrium near the stagnation point, and rebound. Considerable attention is paid to the analysis of hydrodynamic instabilities governing the implosion symmetry. Possible ways of mitigating these instabilities are discussed. Non-magnetohydrodynamic effects (anomalous resistivity, generation of particle beams, etc.) are summarized. Various applications of fast Z pinches are briefly described. Scaling laws governing development of more powerful Z pinches are presented. The survey contains 36 figures and more than 300 references.

  14. The future of the Fast Breeder

    International Nuclear Information System (INIS)

    Lefevre, J.C.

    1990-01-01

    Fast Breeder Reactors (FBRs) can produce more fissile nuclei than they consume whilst, at the same time, generating energy using fast neutrons. By conversion of uranium isotope 238 into a fissionable fuel, FBRs provide over 60 times more energy than can be extracted from the uranium reserves by thermal reactors. Their development is therefore an essential objective in the next century, particularly for those industrialised countries that have little or no energy resources of their own. The European countries which have been engaged in the development of FBRs for more than 25 years have decided to collaborate in an advanced design, the European Fast Reactor (EFR) which uses the best of previous national projects and draws on extensive operating experience from FBR plants in Europe. The naturally safe characteristics and technological features of sodium-cooled Fast Reactors will be fully utilised in an EFR design which meets the same safety level as the Light Water Reactors (LWRs). Owing to technical progress and series construction effect, the EFR is expected to achieve competitiveness with contemporary LWRs with the higher capital cost of the Fast Reactor offset by its markedly lower fuel cycle cost. (author)

  15. Upgrading the ATLAS Fast Calorimeter Simulation

    CERN Document Server

    Hubacek, Zdenek; The ATLAS collaboration

    2016-01-01

    Many physics and performance studies with the ATLAS detector at the Large Hadron Collider require very large samples of simulated events, and producing these using the full GEANT4 detector simulation is highly CPU intensive. Often, a very detailed detector simulation is not needed, and in these cases fast simulation tools can be used to reduce the calorimeter simulation time by a few orders of magnitude. In ATLAS, a fast simulation of the calorimeter systems was developed, called Fast Calorimeter Simulation (FastCaloSim). It provides a parametrized simulation of the particle energy response at the calorimeter read-out cell level. It is interfaced to the standard ATLAS digitization and reconstruction software, and can be tuned to data more easily than with GEANT4. The original version of FastCaloSim has been very important in the LHC Run-1, with several billion events simulated. An improved parametrisation is being developed, to eventually address shortcomings of the original version. It incorporates developme...

  16. The new ATLAS Fast Calorimeter Simulation

    CERN Document Server

    Dias, Flavia; The ATLAS collaboration

    2016-01-01

    A very large number of simulated events is required for physics and performance studies with the ATLAS detector at the Large Hadron Collider. Producing these with the full GEANT4 detector simulation is highly CPU intensive. As a very detailed detector simulation is not always required, fast simulation tools have been developed to reduce the calorimeter simulation time by a few orders of magnitude. The fast simulation of ATLAS for the calorimeter systems used in Run 1, called Fast Calorimeter Simulation (FastCaloSim), provides a parameterized simulation of the particle energy response at the calorimeter read-out cell level. It is then interfaced to the ATLAS digitization and reconstruction software. In Run 1, about 13 billion events were simulated in ATLAS, out of which 50% were produced using fast simulation. For Run 2, a new parameterisation is being developed to improve the original version: It incorporates developments in geometry and physics lists of the last five years and benefits from knowledge acquire...

  17. Fasting-related autophagic response in slow- and fast-twitch skeletal muscle.

    Science.gov (United States)

    Ogata, Tomonori; Oishi, Yasuharu; Higuchi, Mitsuru; Muraoka, Isao

    2010-03-26

    This study investigated regulation of autophagy in slow-twitch soleus and fast-twitch plantaris muscles in fasting-related atrophy. Male Fischer-344 rats were subjected to fasting for 1, 2, or 3 days. Greater weight loss was observed in plantaris muscle than in soleus muscle in response to fasting. Western blot analysis demonstrated that LC3-II, a marker protein for macroautophagy, was expressed at a notably higher level in plantaris than in soleus muscle, and that the expression level was fasting duration-dependent. To identify factors related to LC3-II enhancement, autophagy-related signals were examined in both types of muscle. Phosphorylated mTOR was reduced in plantaris but not in soleus muscle. FOXO3a and ER stress signals were unchanged in both muscle types during fasting. These findings suggest that preferential atrophy of fast-twitch muscle is associated with induction of autophagy during fasting and that differences in autophagy regulation are attributable to differential signal regulation in soleus and plantaris muscle. Copyright (c) 2010 Elsevier Inc. All rights reserved.

  18. Transient digitizer for fast air shower events

    International Nuclear Information System (INIS)

    Wild, N.R.; Clay, R.W.

    1985-01-01

    Air shower structures are often measured on time scales of a few nanoseconds. Longitudinal disk structure near the core is of the order of meters in dimension, air Cerenkov pulses have full widths at half maximum of the order of tens of nanoseconds, and fast timing over typical arrays is usually measured to nanosecond accuracy. Oscilloscopes can be used but have very limited dynamic range and are expensive if measurements down to a few nanoseconds are to be made. For the fast Cerenkov work, an instrument with better dynamic range than an oscilloscope and with a time resolution sufficient to allow measurements limited only by system risetime of a few nanoseconds is needed. A 16/32 channel, 8 bit, fast transient digitizer was designed and built which runs at sample intervals down to approx. 1 nanosecond per channel

  19. A fast tool for minimum hybridization networks.

    Science.gov (United States)

    Chen, Zhi-Zhong; Wang, Lusheng; Yamanaka, Satoshi

    2012-07-02

    Due to hybridization events in evolution, studying two different genes of a set of species may yield two related but different phylogenetic trees for the set of species. In this case, we want to combine the two phylogenetic trees into a hybridization network with the fewest hybridization events. This leads to three computational problems, namely, the problem of computing the minimum size of a hybridization network, the problem of constructing one minimum hybridization network, and the problem of enumerating a representative set of minimum hybridization networks. The previously best software tools for these problems (namely, Chen and Wang's HybridNet and Albrecht et al.'s Dendroscope 3) run very slowly for large instances that cannot be reduced to relatively small instances. Indeed, when the minimum size of a hybridization network of two given trees is larger than 23 and the problem for the trees cannot be reduced to relatively smaller independent subproblems, then HybridNet almost always takes longer than 1 day and Dendroscope 3 often fails to complete. Thus, a faster software tool for the problems is in need. We develop a software tool in ANSI C, named FastHN, for the following problems: Computing the minimum size of a hybridization network, constructing one minimum hybridization network, and enumerating a representative set of minimum hybridization networks. We obtain FastHN by refining HybridNet with three ideas. The first idea is to preprocess the input trees so that the trees become smaller or the problem becomes to solve two or more relatively smaller independent subproblems. The second idea is to use a fast algorithm for computing the rSPR distance of two given phylognetic trees to cut more branches of the search tree in the exhaustive-search stage of the algorithm. The third idea is that during the exhaustive-search stage of the algorithm, we find two sibling leaves in one of the two forests (obtained from the given trees by cutting some edges) such that

  20. A fast tool for minimum hybridization networks

    Directory of Open Access Journals (Sweden)

    Chen Zhi-Zhong

    2012-07-01

    Full Text Available Abstract Background Due to hybridization events in evolution, studying two different genes of a set of species may yield two related but different phylogenetic trees for the set of species. In this case, we want to combine the two phylogenetic trees into a hybridization network with the fewest hybridization events. This leads to three computational problems, namely, the problem of computing the minimum size of a hybridization network, the problem of constructing one minimum hybridization network, and the problem of enumerating a representative set of minimum hybridization networks. The previously best software tools for these problems (namely, Chen and Wang’s HybridNet and Albrecht et al.’s Dendroscope 3 run very slowly for large instances that cannot be reduced to relatively small instances. Indeed, when the minimum size of a hybridization network of two given trees is larger than 23 and the problem for the trees cannot be reduced to relatively smaller independent subproblems, then HybridNet almost always takes longer than 1 day and Dendroscope 3 often fails to complete. Thus, a faster software tool for the problems is in need. Results We develop a software tool in ANSI C, named FastHN, for the following problems: Computing the minimum size of a hybridization network, constructing one minimum hybridization network, and enumerating a representative set of minimum hybridization networks. We obtain FastHN by refining HybridNet with three ideas. The first idea is to preprocess the input trees so that the trees become smaller or the problem becomes to solve two or more relatively smaller independent subproblems. The second idea is to use a fast algorithm for computing the rSPR distance of two given phylognetic trees to cut more branches of the search tree in the exhaustive-search stage of the algorithm. The third idea is that during the exhaustive-search stage of the algorithm, we find two sibling leaves in one of the two forests (obtained from

  1. Enabling fast charging - Battery thermal considerations

    Science.gov (United States)

    Keyser, Matthew; Pesaran, Ahmad; Li, Qibo; Santhanagopalan, Shriram; Smith, Kandler; Wood, Eric; Ahmed, Shabbir; Bloom, Ira; Dufek, Eric; Shirk, Matthew; Meintz, Andrew; Kreuzer, Cory; Michelbacher, Christopher; Burnham, Andrew; Stephens, Thomas; Francfort, James; Carlson, Barney; Zhang, Jiucai; Vijayagopal, Ram; Hardy, Keith; Dias, Fernando; Mohanpurkar, Manish; Scoffield, Don; Jansen, Andrew N.; Tanim, Tanvir; Markel, Anthony

    2017-11-01

    Battery thermal barriers are reviewed with regards to extreme fast charging. Present-day thermal management systems for battery electric vehicles are inadequate in limiting the maximum temperature rise of the battery during extreme fast charging. If the battery thermal management system is not designed correctly, the temperature of the cells could reach abuse temperatures and potentially send the cells into thermal runaway. Furthermore, the cell and battery interconnect design needs to be improved to meet the lifetime expectations of the consumer. Each of these aspects is explored and addressed as well as outlining where the heat is generated in a cell, the efficiencies of power and energy cells, and what type of battery thermal management solutions are available in today's market. Thermal management is not a limiting condition with regard to extreme fast charging, but many factors need to be addressed especially for future high specific energy density cells to meet U.S. Department of Energy cost and volume goals.

  2. Fast mutual-information-based contrast enhancement

    Science.gov (United States)

    Cao, Gang; Yu, Lifang; Tian, Huawei; Huang, Xianglin; Wang, Yongbin

    2017-07-01

    Recently, T. Celik proposed an effective image contrast enhancement (CE) method based on spatial mutual information and PageRank (SMIRANK). According to the state-of-the-art evaluation criteria, it achieves the best visual enhancement quality among existing global CE methods. However, SMIRANK runs much slower than the other counterparts, such as histogram equalization (HE) and adaptive gamma correction. Low computational complexity is also required for good CE algorithms. In this paper, we novelly propose a fast SMIRANK algorithm, called FastSMIRANK. It integrates both spatial and gray-level downsampling into the generation of pixel value mapping function. Moreover, the computation of rank vectors is speeded up by replacing PageRank with a simple yet efficient row-based operation of mutual information matrix. Extensive experimental results show that the proposed FastSMIRANK could accelerate the processing speed of SMIRANK by about 20 times, and is even faster than HE. Comparable enhancement quality is preserved simultaneously.

  3. Fast Hugs with Intensive Care Unit

    Directory of Open Access Journals (Sweden)

    Nimet Şenoğlu

    2014-12-01

    Full Text Available Mnemonics are commonly used in medical procedures as cognitive aids to guide clinicians all over the world. The mnemonic ‘FAST HUG’ (Feeding, Analgesia, Sedation, Thromboembolic prophylaxis, Head-of-bed elevation, stress Ulcer prevention, and Glycemic control was proposed almost ten years ago for patient care in intensive care units and have been commonly used worldwide. Beside this, new mnemonics were also determined for improving routine care of the critically ill patients. But none of this was accepted as much as “FAST HUGS”. In our clinical practice we delivered an another mnemonic as FAST HUGS with ICU (Feeding, Analgesia, Sedation, Thromboembolic prophylaxis, Head-of-bed elevation, Stress ulcer prevention, and Glucose control, Water balance, Investigation and Results, Therapy, Hypo-hyper delirium, Invasive devices, Check the daily infection parameters, Use a checklist for checking some of the key aspects in the general care of intensive care patients. In this review we summarized these mnemonics.

  4. Health Benefits of Fasting and Caloric Restriction.

    Science.gov (United States)

    Golbidi, Saeid; Daiber, Andreas; Korac, Bato; Li, Huige; Essop, M Faadiel; Laher, Ismail

    2017-10-23

    Obesity and obesity-related diseases, largely resulting from urbanization and behavioral changes, are now of global importance. Energy restriction, though, is associated with health improvements and increased longevity. We review some important mechanisms related to calorie limitation aimed at controlling of metabolic diseases, particularly diabetes. Calorie restriction triggers a complex series of intricate events, including activation of cellular stress response elements, improved autophagy, modification of apoptosis, and alteration in hormonal balance. Intermittent fasting is not only more acceptable to patients, but it also prevents some of the adverse effects of chronic calorie restriction, especially malnutrition. There are many somatic and potentially psychologic benefits of fasting or intermittent calorie restriction. However, some behavioral modifications related to abstinence of binge eating following a fasting period are crucial in maintaining the desired favorable outcomes.

  5. Fasting in Ramadan with an insulin pump.

    Science.gov (United States)

    Kesavadev, Jothydev

    2015-05-01

    A good majority of subjects with diabetes on insulin therapies observe fasting during Ramadan. The challenge for the physician and the patient is to manage diabetes without an interruption to fasting by avoiding hypoglycaemia and simultaneously ensuring that blood glucose remain at acceptable safe levels. Insulin Pumps differ from syringes and insulin pens in that it offers a variable basal rate, different type of boluses and associated calculators. The technological advances that pumps offer, help educated subjects pre-programme a reduced basal rate throughout the day. Pumps ensure avoidance of hypoglycaemia and hyperglycaemia and preserve quality of life and enhance confidence in patients during fasting. Due to multiple benefits, insulin pumps are considered the best delivery systems for insulin during the holy month of Ramadan, despite the prerequisites for its optimal output and cost concerns.

  6. Conceptual Design of the FAST-D Formation Flying Spacecraft

    NARCIS (Netherlands)

    Maessen, D.C.; Guo, J.; Gill, E.; Gunter, B.; Chu, Q.P.; Bakker, G.; Laan, E.; Moon, S.; Kruijff, M.; Zheng, G.T.

    2009-01-01

    The paper presents the latest results in the design of FAST-D, the Dutch micro-satellite for the Dutch–Chinese FAST (Formation for Atmospheric Science and Technology demonstration) formation flying mission. Over the course of the 2.5 year mission, the two satellites, FAST-D and FAST-T, will

  7. Fast breeder reactor safety : a perspective

    International Nuclear Information System (INIS)

    Kale, R.D.

    1992-01-01

    Taking into consideration India's limited reserves of natural and vast reserves of thorium, the fast reactor route holds a great promise for India's energy supply in future. The fast reactor fueled with 239 Pu/ 238 U (unused or depleted) produces (breeds) more fissionable fuel material 239 Pu than it consumes. Calculations show that a fast breeder reactor (FBR) increases energy potential of natural uranium by about 60 times. As the fast reactor can also convert 232 Th into 233 U which is a fissionable material, it can make India's thorium reserves a source of almost inexhaustible energy supply for a long time to come. Significant advantage of FBR plants cooled by sodium and their world-wide operating experience are reviewed. There are two main safety issues of FBR, one nuclear and the other non-nuclear. The nuclear issue concerns core disruptive accident and the non-nuclear one concerns the high chemical energy potential of sodium. These two issues are analysed and it is pointed that they are manageable by current design, construction and operational practices. Main findings of safety research during the last six to eight years in West European Countries and United States of America (US) are summarised. Three stage engineered safety provision incorporated into the design of the sodium cooled Fast Breeder Test Reactor (FBTR) commissioned at Kalpakkam are explained. The important design safety features of FBTR such as primary system containment, emergency core cooling, plant protection system, inherent safety features achieved through reactivity coefficients, and natural convection cooling are discussed. Theoretical analysis and experimental research in fast reactor safety carried out at the Indira Gandhi Centre for Atomic Research during the past some years are reviewed. (M.G.B.)

  8. Ramadan fasting in patients with adrenal insufficiency.

    Science.gov (United States)

    Chihaoui, Mélika; Chaker, Fatma; Yazidi, Meriem; Grira, Wafa; Ben Amor, Zohra; Rejeb, Ons; Slimane, Hedia

    2017-01-01

    The risks of fasting during Ramadan in patients with adrenal insufficiency are unknown. The aims of this study were to evaluate these risks in such patients, to determine the risk factors and finally to set some recommendations. It is a cross-sectional study about 180 patients with known and treated adrenal insufficiency. The patients responded to a 14-item questionnaire concerning their knowledge about the disease and fasting during the last month of Ramadan. There were 132 women and 48 men. The mean age was 47.6 ± 15.0 years (14-79). One hundred and thirty eight patients (76.7 %) were advised by their physician not to fast. Ninety-one patients (50.5 %) tried to fast. Complications occurred in 61 cases (67.0 %): asthenia in 88.5 % of cases, intense thirst in 32.8 %, symptoms of dehydration in 49.2 % and symptoms of hypoglycaemia in 18 %. One patient was hospitalized. Fifty-five patients (60.4 %) were able to fast for the whole month. Age, gender, duration of the disease, its primary origin, associated hypothyroidism, diabetes mellitus, hypertension or diabetes insipidus and daily dose of hydrocortisone did not significantly differ between fasters and non-fasters, full-month-fasters and partial-month-fasters, and fasters with complications and fasters without complications. The frequency of adequate knowledge about the disease was significantly higher in full-month-fasters vs. partial-month-fasters, and in fasters without complications vs. those with complications. In patients with adrenal insufficiency, fasting can cause complications especially if the level of knowledge about the disease is low.

  9. Does Ramadan Fasting Increase duodenal ulcer perforation?

    Directory of Open Access Journals (Sweden)

    Abdoulhossein Davoodabadi

    2016-03-01

    Full Text Available Introduction: In Ramadan, healthy adult Muslims are obliged to fast. Prolonged fasting increase gastric acid and pepsin levels, which promote the risk of duodenal ulcer perforation (DUP. Effects of Ramadan fasting on DUP have not been thoroughly studied yet, and the limited number of studies investigating the impact of Ramadan fasting on DUP yielded discrepant results. This study aimed to evaluate DUP frequency during Ramadan 2011-2015 and compare it with other months. Methods: This cross-sectional study was performed in 82 patients undergoing surgery due to DUP during July 2011-September 2015. The demographics, history of addiction, use of nonsteroidal and antiinflammatory drugs, previous history of acid peptic disease, as well as complications and outcomes of treatment were recorded and analyzed, and the obtained results were compared between Ramadan and other lunar months. Results: The majority of patients were male (86.6%, 71 patients, with a mean age of 43.9±16.5 years (age range: 20-75 years. Male to female ratio was 6:1. Cases with less than 30 years of age were less frequent (22%, 18 patients. DUP was more frequent during Rajab with nine cases (11%, while during Ramadan, six cases were reported, the difference between Ramadan and other months regarding the incidence of DUP was not significant (P=0.7. Risk factors such as smoking (60% and addiction (44%; especially to crystal and crack were noted. Consumption of nonsteroidal antiinflammatory drugs in 20 (24% patients, and use of antacids in 17 (25% patients. Distribution of DUP in different blood types was as follows: O+=41%, A+=28%, B+=23%, AB=5%, and O-=3%; moreover, post-operative Helicobacter pylori antibody was present in 67% of the patients. Conclusion: Ramadan fasting did not escalate DUP incidence, and those with DUP risk factors can fast with the use of antacids.

  10. Generalized fast feedback system in the SLC

    International Nuclear Information System (INIS)

    Hendrickson, L.; Allison, S.; Gromme, T.; Himel, T.; Krauter, K.; Rouse, F.; Sass, R.; Shoaee, H.

    1991-11-01

    A generalized fast feedback system has been developed to stabilize beams at various locations in the SLC. The system is designed to perform measurements and change actuator settings to control beam states such as position, angle and energy on a pulse to pulse basis. The software design is based on the state space formalism of digital control theory. The system is database-driven, facilitating the addition of new loops without requiring additional software. A communications system, KISNet, provides fast communications links between microprocessors for feedback loops which involve multiple micros. Feedback loops have been installed in seventeen locations throughout the SLC and have proven to be invaluable in stabilizing the machine

  11. Generalized fast feedback system in the SLC

    International Nuclear Information System (INIS)

    Hendrickson, L.; Allison, S.; Gromme, T.; Himel, T.; Krauter, K.; Rouse, F.; Sass, R.; Shoaee, H.

    1992-01-01

    A generalized fast feedback system has been developed to stabilize beams at various locations in the SLC. The system is designed to perform measurements and change actuator settings to control beam states such as position, angle and energy on a pulse to pulse basis. The software design is based on the state space formalism of digital control theory. The system is database-driven, facilitating the addition of new loops without requiring additional software. A communications system, KISNet, provides fast communications links between microprocessors for feedback loops which involve multiple micros. Feedback loops have been installed in seventeen locations throughout the SLC and have proven to be invaluable in stabilizing the machine. (author)

  12. The dismantling of fast reactors: sodium processing

    International Nuclear Information System (INIS)

    Rodriguez, G.; Berte, M.; Serpante, J.P.

    1999-01-01

    Fast reactors require a coolant that does not slow down neutrons so water can not be used. Metallic sodium has been chosen because of its outstanding neutronic and thermal properties but sodium reacts easily with air and water and this implies that sodium-smeary components can not be considered as usual nuclear wastes. A stage of sodium neutralizing is necessary in the processing of wastes from fast reactors. Metallic sodium is turned into a chemically stable compound: soda, carbonates or sodium salts. This article presents several methods used by Framatome in an industrial way when dismantling sodium-cooled reactors. (A.C.)

  13. Slow clean-up for fast reactor

    Science.gov (United States)

    Banks, Michael

    2008-05-01

    The year 2300 is so distant that one may be forgiven for thinking of it only in terms of science fiction. But this is the year that workers at the Dounreay power station in Northern Scotland - the UK's only centre for research into "fast" nuclear reactors - term as the "end point" by which time the site will be completely clear of radioactive material. More than 180 facilities - including the iconic dome that housed the Dounreay Fast Reactor (DFR) - were built at at the site since it opened in 1959, with almost 50 having been used to handle radioactive material.

  14. Fast automated scanning of OPERA emulsion films

    CERN Document Server

    Sirri, G.

    2007-01-01

    The use of nuclear emulsions to record tracks of charged particles with an accuracy of better than 1 micron is possible in large physics experiments thanks to the recent improvements in the industrial production of emulsions and to the development of fast automated microscopes. The European Scanning System (ESS) is a fast automatic system developed for the mass scanning of the emulsions of the OPERA experiment, which requires microscopes with scanning speeds of about 20 cm$^2$/h. Recent improvements in the technique and measurements with ESS are reported.

  15. Sodium fast reactors with closed fuel cycle

    CERN Document Server

    Raj, Baldev; Vasudeva Rao, PR 0

    2015-01-01

    Sodium Fast Reactors with Closed Fuel Cycle delivers a detailed discussion of an important technology that is being harnessed for commercial energy production in many parts of the world. Presenting the state of the art of sodium-cooled fast reactors with closed fuel cycles, this book:Offers in-depth coverage of reactor physics, materials, design, safety analysis, validations, engineering, construction, and commissioning aspectsFeatures a special chapter on allied sciences to highlight advanced reactor core materials, specialized manufacturing technologies, chemical sensors, in-service inspecti

  16. Status of fast reactor activities in Russia

    International Nuclear Information System (INIS)

    Poplavski, V.M.; Ashurko, Yu.M.; Zverev, K.V.

    1998-01-01

    This paper outlines state-of-the-art of the Russian nuclear power as of 1997 and its prospects for the nearest future. Results of the BR-10, BOR-60 and BN-600 reactors operation are described, as well as activity of the Russian institutions on scientific and technological support of the BN-350 reactor. Analysis of current status of the BN-800 reactor South-Urals NPP and Beloyarskaya NPP designs is given in brief, as well as prospects of their construction and possible ways of fast reactor technology improvement. Studies on fast reactors now under way in Russia are described. (author)

  17. Fast Reactor Knowledge Management at IGCAR, India

    International Nuclear Information System (INIS)

    Kuriakose, K.K.

    2013-01-01

    The Process Architecture: → Acquire: Solicitation; Voluntary submission; Mandatory requirements; Interview/Observation; → Quality Control: Review/Editing; Certification; Quality index; → Disseminate: Publish through the Technology architecture; Formal/Informal Meetings; COPs; → Utilize: Projects; Day-to-day activities; → Maintenance; → Retirement. Mission: To conduct a broad based multidisciplinary programme of scientific research and advanced engineering development, directed towards the establishment of the technology of Sodium Cooled Fast Breeder Reactors (FBR) and associated fuel cycle facilities in the Country. The mission includes the development and applications of new and improved materials, techniques, equipment and systems for FBRs, pursue basic research to achieve breakthroughs in Fast Reactor technology

  18. Fast food and the semiotics of gastronomy

    Directory of Open Access Journals (Sweden)

    Elena FELL

    2015-12-01

    Full Text Available Nourishment stands apart from other physiological events: whilst we normally exercise discretion in relation to bodily functions, food consumption takes place in public. We dine, snack and nibble in front of others, and the imagery associated with food takes on the manifold of meanings—religious, cultural, historic and so forth. Gastronomic practices unite or divide people, and as such are a powerful communication tool. As the twenty-first century confrontational stance between fast food and family meal traditions intensifies, we investigate fast food’s visual imagery and its ability to attract consumers.

  19. Fast plastic scintillator SPS-B18

    International Nuclear Information System (INIS)

    Andreeshchev, E.A.; Avetisyan, V.S.; Veronyan, S.M.

    1988-01-01

    The test results of fast response of SPS-B18 scintillators with 25 mm diameter and height are presented. The scintillators are made by thermal polymerization of solution by two luminescent additions in highly refined styrene. As a first luminescent addition n-terphenyl with 3.5 % concentration is used. The scintillator fast response is obtained by introduction of the second luminescent addition, which atoms (halogen atoms) have small excited state lifetime. The use of the effect of intramolecular quenching of the luminescent addition permits to make a plastic scintillator having scintillation pulse duration at halfheight of 0.15 ns

  20. Omsætning af fast ejendom

    DEFF Research Database (Denmark)

    Edlund, Hans Henrik

    Bogen er en systematisk gennemgang af lov om omsætning af fast ejendom, der regulerer ejendomsmægleres virke. Følgende emner er bl.a. behandlet: Hvem kan drive ejendomsmæglervirksomhed og ejendomsmæglernes pligter og ansvar.......Bogen er en systematisk gennemgang af lov om omsætning af fast ejendom, der regulerer ejendomsmægleres virke. Følgende emner er bl.a. behandlet: Hvem kan drive ejendomsmæglervirksomhed og ejendomsmæglernes pligter og ansvar....

  1. Pre-operative fasting guidelines: an update

    DEFF Research Database (Denmark)

    Søreide, E; Eriksson, L I; Hirlekar, G

    2005-01-01

    Liberal pre-operative fasting routines have been implemented in most countries. In general, clear fluids are allowed up to 2 h before anaesthesia, and light meals up to 6 h. The same recommendations apply for children and pregnant women not in labour. In children......Liberal pre-operative fasting routines have been implemented in most countries. In general, clear fluids are allowed up to 2 h before anaesthesia, and light meals up to 6 h. The same recommendations apply for children and pregnant women not in labour. In children...

  2. Radiation therapy with fast neutrons: A review

    International Nuclear Information System (INIS)

    Jones, D.T.L.; Wambersie, A.

    2007-01-01

    Because of their biological effects fast neutrons are most effective in treating large, slow-growing tumours which are resistant to conventional X-radiation. Patients are treated typically 3-4 times per week for 4-5 weeks (sometimes in combination with X-radiation) for a variety of conditions such as carcinomas of the head and neck, salivary gland, paranasal sinus and breast; soft tissue, bone and uterine sarcomas and malignant melanomas. It is estimated that about 27,000 patients have undergone fast neutron therapy to date

  3. Fast Food, Addiction, and Market Power

    OpenAIRE

    Richards, Timothy J.; Patterson, Paul M.; Hamilton, Stephen F.

    2007-01-01

    Many attribute the rise in obesity since the early 1980's to the overconsumption of fast food. A dynamic model of a different-product industry equilibrium shows that a firm with market power will price below marginal cost in a steady-state equilibrium. A spatial hedonic pricing model is used to test whether fast food firms set prices in order to exploit their inherent addictiveness. The results show that firms price products dense in addictive nutrients below marginal cost, but price products...

  4. A pragmatic overview of fast multipole methods

    Energy Technology Data Exchange (ETDEWEB)

    Strickland, J.H.; Baty, R.S.

    1995-12-01

    A number of physics problems can be modeled by a set of N elements which have pair-wise interactions with one another. A direct solution technique requires computational effort which is O(N{sup 2}). Fast multipole methods (FMM) have been widely used in recent years to obtain solutions to these problems requiring a computational effort of only 0 (N lnN) or O (N). In this paper we present an overview of several variations of the fast multipole method along with examples of its use in solving a variety of physical problems.

  5. Discharges from a fast reactor reprocessing plant

    International Nuclear Information System (INIS)

    Barnes, D.S.

    1987-01-01

    The purpose of this paper is to assess the environmental impact of the calculated routine discharges from a fast reactor fuel reprocessing plant. These assessments have been carried out during the early stages of an evolving in-depth study which culminated in the design for a European demonstration reprocessing plant (EDRP). This plant would be capable of reprocessing irradiated fuel from a series of European fast reactors. Cost-benefit analysis has then been used to assess whether further reductions in the currently predicted routine discharges would be economically justified

  6. Surface effects on vibration analysis of elastically restrained piezoelectric nanobeams subjected to magneto-thermo-electrical field embedded in elastic medium

    Science.gov (United States)

    Marzbanrad, Javad; Boreiry, Mahya; Shaghaghi, Gholam Reza

    2017-04-01

    In the present study, a generalized nonlocal beam theory is utilized to study the magneto-thermo-mechanical vibration characteristic of piezoelectric nanobeam by considering surface effects rested in elastic medium for various elastic boundary conditions. The nonlocal elasticity of Eringen as well as surface effects, including surface elasticity, surface stress and surface density are implemented to inject size-dependent effects into equations. Using the Hamilton's principle and Euler-Bernoulli beam theory, the governing differential equations and associated boundary conditions will be obtained. The differential transformation method (DTM) is used to discretize resultant motion equations and related boundary conditions accordingly. The natural frequencies are obtained for the various elastic boundary conditions in detail to show the significance of nonlocal parameter, external voltage, temperature change, surface effects, elastic medium, magnetic field and length of nanobeam. Moreover, it should be noted that by changing the spring stiffness at each end, the conventional boundary conditions will be obtained which are validated by well-known literature.

  7. Effects of Ramadan Fasting on Lipid Profile: A Narrative Review

    OpenAIRE

    Mohsen Mazidi; Peyman Rezaie; Ehsan Karimi; Mohsen Nematy

    2014-01-01

    Ramadan Fasting during the month of Ramadan is a religious obligation, practiced by millions of people around the world. Ramadan fasting is essentially a fundamental change in lifestyle for one lunar month. This type of fasting may have significant effects on lipid profile. Although there is no scientific consensus about the effects of fasting on cardiovascular risks such as changes in lipid profile, some studies have revealed the positive effects of Ramadan fasting (and similar religious fas...

  8. Adverse health effects associated with Islamic fasting -A literature review

    OpenAIRE

    Nania Mohamed Pakkir Maideen; Aََََbdurazak Jumale; Rajkapoor Balasubramaniam

    2017-01-01

    Introduction: Millions of Muslims across the world observe Islamic fasting during the holy month of Ramadan, as well as the other specific dates in the lunar calendar year. While fasting during this month, Muslims refrain from eating or drinking from dawn to dusk. Islamic fasting is similar to alternate day fasting (ADF) since it incorporates an average of 12 hours of fasting and 12 hours of feasting periods. This present review study is aimed to find out the common adverse health effects ass...

  9. Fast food purchasing and access to fast food restaurants: a multilevel analysis of VicLANES

    Science.gov (United States)

    Thornton, Lukar E; Bentley, Rebecca J; Kavanagh, Anne M

    2009-01-01

    Background While previous research on fast food access and purchasing has not found evidence of an association, these studies have had methodological problems including aggregation error, lack of specificity between the exposures and outcomes, and lack of adjustment for potential confounding. In this paper we attempt to address these methodological problems using data from the Victorian Lifestyle and Neighbourhood Environments Study (VicLANES) – a cross-sectional multilevel study conducted within metropolitan Melbourne, Australia in 2003. Methods The VicLANES data used in this analysis included 2547 participants from 49 census collector districts in metropolitan Melbourne, Australia. The outcome of interest was the total frequency of fast food purchased for consumption at home within the previous month (never, monthly and weekly) from five major fast food chains (Red Rooster, McDonalds, Kentucky Fried Chicken, Hungry Jacks and Pizza Hut). Three measures of fast food access were created: density and variety, defined as the number of fast food restaurants and the number of different fast food chains within 3 kilometres of road network distance respectively, and proximity defined as the road network distance to the closest fast food restaurant. Multilevel multinomial models were used to estimate the associations between fast food restaurant access and purchasing with never purchased as the reference category. Models were adjusted for confounders including determinants of demand (attitudes and tastes that influence food purchasing decisions) as well as individual and area socio-economic characteristics. Results Purchasing fast food on a monthly basis was related to the variety of fast food restaurants (odds ratio 1.13; 95% confidence interval 1.02 – 1.25) after adjusting for individual and area characteristics. Density and proximity were not found to be significant predictors of fast food purchasing after adjustment for individual socio-economic predictors

  10. Fast food purchasing and access to fast food restaurants: a multilevel analysis of VicLANES

    Directory of Open Access Journals (Sweden)

    Kavanagh Anne M

    2009-05-01

    Full Text Available Abstract Background While previous research on fast food access and purchasing has not found evidence of an association, these studies have had methodological problems including aggregation error, lack of specificity between the exposures and outcomes, and lack of adjustment for potential confounding. In this paper we attempt to address these methodological problems using data from the Victorian Lifestyle and Neighbourhood Environments Study (VicLANES – a cross-sectional multilevel study conducted within metropolitan Melbourne, Australia in 2003. Methods The VicLANES data used in this analysis included 2547 participants from 49 census collector districts in metropolitan Melbourne, Australia. The outcome of interest was the total frequency of fast food purchased for consumption at home within the previous month (never, monthly and weekly from five major fast food chains (Red Rooster, McDonalds, Kentucky Fried Chicken, Hungry Jacks and Pizza Hut. Three measures of fast food access were created: density and variety, defined as the number of fast food restaurants and the number of different fast food chains within 3 kilometres of road network distance respectively, and proximity defined as the road network distance to the closest fast food restaurant. Multilevel multinomial models were used to estimate the associations between fast food restaurant access and purchasing with never purchased as the reference category. Models were adjusted for confounders including determinants of demand (attitudes and tastes that influence food purchasing decisions as well as individual and area socio-economic characteristics. Results Purchasing fast food on a monthly basis was related to the variety of fast food restaurants (odds ratio 1.13; 95% confidence interval 1.02 – 1.25 after adjusting for individual and area characteristics. Density and proximity were not found to be significant predictors of fast food purchasing after adjustment for individual socio

  11. Slow and fast light in semiconductors

    Science.gov (United States)

    Sedgwick, Forrest Grant

    Slow and fast light are the propagation of optical signals at group velocities below and above the speed of light in a given medium. There has been great interest in the use of nonlinear optics to engineer slow and fast light dispersion for applications in optical communications and radio-frequency or microwave photonics. Early results in this field were primarily confined to dilute atomic systems. While these results were impressive, they had two major barriers to practical application. First, the wavelengths were not compatible with fiber optic telecommunications. More importantly, the bandwidth obtainable in these experiments was inherently low; 100 kHz or less. Within the last five years slow and fast light effects have been observed and engineered in a much wider variety of systems. In this work, we detail our efforts to realize slow and fast light in semiconductor systems. There are three primary advantages of semiconductor systems: fiber-compatible wavelengths, larger bandwidth, and simplification of integration with other optical components. In this work we will explore three different types of physical mechanisms for implementing slow and fast light. The first is electromagnetically induced transparency (EIT). In transporting this process to semiconductors, we initially turn our attention to quantum dots or "artificial atoms". We present simulations of a quantum dot EIT-based device within the context of an optical communications link and we derive results which are generally applicable to a broad class of slow light devices. We then present experimental results realizing EIT in quantum wells by using long-lived electron spin coherence. The second mechanism we will explore is coherent population oscillations (CPO), also known as carrier density pulsations (CDP). We examine for the first time how both slow and fast light may be achieved in a quantum well semiconductor optical amplifier (SOA) while operating in the gain regime. Again, we simulate the device

  12. Distraction, not hunger, is associated with lower mood and lower perceived work performance on fast compared to non-fast days during intermittent fasting.

    Science.gov (United States)

    Appleton, Katherine M; Baker, Stephanie

    2015-06-01

    Using a repeated measures design, 16 females recorded hunger, distraction, mood and perceived work performance on two consecutive fast days, on two earlier and on two subsequent consecutive non-fast days, during intermittent fasting. Using regression analyses, low positive mood was associated with higher distraction (β = -0.38, p intermittent fasting-type regimes. © The Author(s) 2015.

  13. Association between proximity to and coverage of traditional fast-food restaurants and non-traditional fast-food outlets and fast-food consumption among rural adults.

    Science.gov (United States)

    Sharkey, Joseph R; Johnson, Cassandra M; Dean, Wesley R; Horel, Scott A

    2011-05-20

    The objective of this study is to examine the relationship between residential exposure to fast-food entrées, using two measures of potential spatial access: proximity (distance to the nearest location) and coverage (number of different locations), and weekly consumption of fast-food meals. Traditional fast-food restaurants and non-traditional fast-food outlets, such as convenience stores, supermarkets, and grocery stores, from the 2006 Brazos Valley Food Environment Project were linked with individual participants (n = 1409) who completed the nutrition module in the 2006 Brazos Valley Community Health Assessment. Increased age, poverty, increased distance to the nearest fast food, and increased number of different traditional fast-food restaurants, non-traditional fast-food outlets, or fast-food opportunities were associated with less frequent weekly consumption of fast-food meals. The interaction of gender and proximity (distance) or coverage (number) indicated that the association of proximity to or coverage of fast-food locations on fast-food consumption was greater among women and opposite of independent effects. Results provide impetus for identifying and understanding the complex relationship between access to all fast-food opportunities, rather than to traditional fast-food restaurants alone, and fast-food consumption. The results indicate the importance of further examining the complex interaction of gender and distance in rural areas and particularly in fast-food consumption. Furthermore, this study emphasizes the need for health promotion and policy efforts to consider all sources of fast-food as part of promoting healthful food choices.

  14. Association between proximity to and coverage of traditional fast-food restaurants and non-traditional fast-food outlets and fast-food consumption among rural adults

    Directory of Open Access Journals (Sweden)

    Horel Scott A

    2011-05-01

    Full Text Available Abstract Objective The objective of this study is to examine the relationship between residential exposure to fast-food entrées, using two measures of potential spatial access: proximity (distance to the nearest location and coverage (number of different locations, and weekly consumption of fast-food meals. Methods Traditional fast-food restaurants and non-traditional fast-food outlets, such as convenience stores, supermarkets, and grocery stores, from the 2006 Brazos Valley Food Environment Project were linked with individual participants (n = 1409 who completed the nutrition module in the 2006 Brazos Valley Community Health Assessment. Results Increased age, poverty, increased distance to the nearest fast food, and increased number of different traditional fast-food restaurants, non-traditional fast-food outlets, or fast-food opportunities were associated with less frequent weekly consumption of fast-food meals. The interaction of gender and proximity (distance or coverage (number indicated that the association of proximity to or coverage of fast-food locations on fast-food consumption was greater among women and opposite of independent effects. Conclusions Results provide impetus for identifying and understanding the complex relationship between access to all fast-food opportunities, rather than to traditional fast-food restaurants alone, and fast-food consumption. The results indicate the importance of further examining the complex interaction of gender and distance in rural areas and particularly in fast-food consumption. Furthermore, this study emphasizes the need for health promotion and policy efforts to consider all sources of fast-food as part of promoting healthful food choices.

  15. Association between proximity to and coverage of traditional fast-food restaurants and non-traditional fast-food outlets and fast-food consumption among rural adults

    OpenAIRE

    Sharkey, Joseph R; Johnson, Cassandra M; Dean, Wesley R; Horel, Scott A

    2011-01-01

    Abstract Objective The objective of this study is to examine the relationship between residential exposure to fast-food entrées, using two measures of potential spatial access: proximity (distance to the nearest location) and coverage (number of different locations), and weekly consumption of fast-food meals. Methods Traditional fast-food restaurants and non-traditional fast-food outlets, such as convenience stores, supermarkets, and grocery stores, from the 2006 Brazos Valley Food Environmen...

  16. Association between proximity to and coverage of traditional fast-food restaurants and non-traditional fast-food outlets and fast-food consumption among rural adults

    Science.gov (United States)

    2011-01-01

    Objective The objective of this study is to examine the relationship between residential exposure to fast-food entrées, using two measures of potential spatial access: proximity (distance to the nearest location) and coverage (number of different locations), and weekly consumption of fast-food meals. Methods Traditional fast-food restaurants and non-traditional fast-food outlets, such as convenience stores, supermarkets, and grocery stores, from the 2006 Brazos Valley Food Environment Project were linked with individual participants (n = 1409) who completed the nutrition module in the 2006 Brazos Valley Community Health Assessment. Results Increased age, poverty, increased distance to the nearest fast food, and increased number of different traditional fast-food restaurants, non-traditional fast-food outlets, or fast-food opportunities were associated with less frequent weekly consumption of fast-food meals. The interaction of gender and proximity (distance) or coverage (number) indicated that the association of proximity to or coverage of fast-food locations on fast-food consumption was greater among women and opposite of independent effects. Conclusions Results provide impetus for identifying and understanding the complex relationship between access to all fast-food opportunities, rather than to traditional fast-food restaurants alone, and fast-food consumption. The results indicate the importance of further examining the complex interaction of gender and distance in rural areas and particularly in fast-food consumption. Furthermore, this study emphasizes the need for health promotion and policy efforts to consider all sources of fast-food as part of promoting healthful food choices. PMID:21599955

  17. Fast Link Adaptation for MIMO-OFDM

    DEFF Research Database (Denmark)

    Jensen, Tobias Lindstrøm; Kant, Shashi; Wehinger, Joachim

    2010-01-01

    We investigate link-quality metrics (LQMs) based on raw bit-error-rate, effective signal-to-interference-plus-noise ratio, and mutual information (MI) for the purpose of fast link adaptation (LA) in communication systems employing orthogonal frequency-division multiplexing and multiple-input–mult...

  18. Charging machine for a fast production reactor

    International Nuclear Information System (INIS)

    Artem'ev, L.N.; Kurilkin, V.V.

    1971-01-01

    Charging machine for a fast production reactor is described. The machine contains charging mechanism, mechanism for positioning fresh fuel and spent fuel assemtlies, storage drums with sockets for control rod assemtlies and collet tongs for control rods. Recharging is conducted by means of ramp channel

  19. Sleep changes in emperor penguins during fasting.

    Science.gov (United States)

    Dewasmes, G; Buchet, C; Geloen, A; Le Maho, Y

    1989-02-01

    The proportion and the distribution over 24 h of the different arousal stages characterized in emperor penguins [wakefulness (W), drowsiness (D), slow-wave sleep (SWS), and paradoxical sleep (PS)] were studied under natural ambient conditions in four subjects that were first fed and then deprived of food for 7-18 days. In both fed and fasting states, each arousal stage was distributed through numerous episodes of short duration. The fasting state provoked only a slight increase in D. There was, however, a large increase in SWS, which increased from 37.5 to 55.4%/day, mainly at the expense of W, which fell from 42.7 to 21.9%/day, in close relation to the first two fasting phases when proteins were saved and when most of the energy was derived from lipids. PS proportions were lower during fasting (from 5.7 to 2.4%/day). These changes in the arousal stages in emperor penguins are examined for their implications in sleep mechanisms and energy saving. Their possible consequences, due to the reduced alertness, are also discussed.

  20. Enabling fast charging - Infrastructure and economic considerations

    Science.gov (United States)

    Burnham, Andrew; Dufek, Eric J.; Stephens, Thomas; Francfort, James; Michelbacher, Christopher; Carlson, Richard B.; Zhang, Jiucai; Vijayagopal, Ram; Dias, Fernando; Mohanpurkar, Manish; Scoffield, Don; Hardy, Keith; Shirk, Matthew; Hovsapian, Rob; Ahmed, Shabbir; Bloom, Ira; Jansen, Andrew N.; Keyser, Matthew; Kreuzer, Cory; Markel, Anthony; Meintz, Andrew; Pesaran, Ahmad; Tanim, Tanvir R.

    2017-11-01

    The ability to charge battery electric vehicles (BEVs) on a time scale that is on par with the time to fuel an internal combustion engine vehicle (ICEV) would remove a significant barrier to the adoption of BEVs. However, for viability, fast charging at this time scale needs to also occur at a price that is acceptable to consumers. Therefore, the cost drivers for both BEV owners and charging station providers are analyzed. In addition, key infrastructure considerations are examined, including grid stability and delivery of power, the design of fast charging stations and the design and use of electric vehicle service equipment. Each of these aspects have technical barriers that need to be addressed, and are directly linked to economic impacts to use and implementation. This discussion focuses on both the economic and infrastructure issues which exist and need to be addressed for the effective implementation of fast charging at 400 kW and above. In so doing, it has been found that there is a distinct need to effectively manage the intermittent, high power demand of fast charging, strategically plan infrastructure corridors, and to further understand the cost of operation of charging infrastructure and BEVs.

  1. Recursive and Fast Recursive Capon Spectral Estimators

    Directory of Open Access Journals (Sweden)

    Chen Jingdong

    2007-01-01

    Full Text Available The Capon algorithm, which was originally proposed for wavenumber estimation in array signal processing, has become a powerful tool for spectral analysis. Over several decades, a significant amount of research attention has been devoted to the estimation of the Capon spectrum. Most of the developed algorithms thus far, however, rely on the direct computation of the inverse of the input correlation (or covariance matrix, which can be computationally very expensive particularly when the dimension of the matrix is large. This paper deals with fast and efficient algorithms in computing the Capon spectrum. Inspired from the recursive idea established in adaptive signal processing theory, we first derive a recursive Capon algorithm. This new algorithm does not require an explicit matrix inversion, and hence it is more efficient to implement than the direct-inverse approach. We then develop a fast version of the recursive algorithm based on techniques used in fast recursive least-squares adaptive algorithms. This new fast algorithm can further reduce the complexity of the recursive Capon algorithm by an order of magnitude. Although our focus is on the Capon spectral estimation, the ideas shown in this paper can also be generalized and applied to other applications. To illustrate this, we will show how to apply the recursive idea to the estimation of the magnitude squared coherence function, which plays an important role for problems like time-delay estimation, signal-to-noise ratio estimation, and doubletalk detection in echo cancellation.

  2. Fast Breeder Project. Second quarterly report, 1974

    International Nuclear Information System (INIS)

    Hueper, R.

    Research progress is reported on fuel pin development, material studies and development, corrosion tests and coolant analysis, fuel cycle studies, physics experiments, fast reactor safety, instrumentation development, environmental studies, and sodium technology tests. Much of the work had SNR-300 design applications. (U.S.)

  3. Trend of development of fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    Murakami, S. (Science and Technology Agency, Tokyo (Japan). Atomic Energy Bureau)

    1982-01-01

    The development of nuclear power is indispensable as the core of the substitute energy for petroleum. It is the urgent subject for world advanced countries to develop fast breeder reactors which can utilize uranium resources efficiently, to breed nuclear fuel resources, and to secure the stable supply of energy for long term in future. In Japan, the development of fast breeder reactors has been advanced independently and efficiently as a national project mainly by the Power Reactor and Nuclear Fuel Development Corp. The experimental reactor ''Joyo'' attained the criticality in April, 1977, and has been operated at the thermal output of 75,000 kW. As for the prototype reactor ''Monju'', the application for the permission to install it was submitted in December, 1980, and now, the safety examination is in progress. The present state of the development of fast breeder reactors in USA, Great Britain, France, West Germany, USSR and Japan is explained. In order to advance fast breeder reactors to the stage of full-scale practical use, a number of the reactors of 1 million kW class including the demonstration reactor will be constructed and operated to demonstrate and learn the technology of power generation plants in practical scale, to improve the performance, and to establish the economical efficiency. The schedule of development, the organization and the sharing of roles, the research and development in the demonstration stage are described.

  4. Fast response densitometer for measuring liquid density

    Science.gov (United States)

    1972-01-01

    Densitometer was developed which produces linear voltage proportional to changes in density of flowing liquid hydrogen. Unit has fast response time and good system stability, statistical variation, and thermal equilibrium. System accuracy is 2 percent of total density span. Basic design may be altered to include measurement of other flowing materials.

  5. FastMotif: spectral sequence motif discovery.

    Science.gov (United States)

    Colombo, Nicoló; Vlassis, Nikos

    2015-08-15

    Sequence discovery tools play a central role in several fields of computational biology. In the framework of Transcription Factor binding studies, most of the existing motif finding algorithms are computationally demanding, and they may not be able to support the increasingly large datasets produced by modern high-throughput sequencing technologies. We present FastMotif, a new motif discovery algorithm that is built on a recent machine learning technique referred to as Method of Moments. Based on spectral decompositions, our method is robust to model misspecifications and is not prone to locally optimal solutions. We obtain an algorithm that is extremely fast and designed for the analysis of big sequencing data. On HT-Selex data, FastMotif extracts motif profiles that match those computed by various state-of-the-art algorithms, but one order of magnitude faster. We provide a theoretical and numerical analysis of the algorithm's robustness and discuss its sensitivity with respect to the free parameters. The Matlab code of FastMotif is available from http://lcsb-portal.uni.lu/bioinformatics. vlassis@adobe.com Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  6. FATRAS - the ATLAS Fast Track Simulation project

    NARCIS (Netherlands)

    Mechnich, J.

    2011-01-01

    The Monte Carlo simulation of the detector response is an integral component of any analysis performed with data from the LHC experiments. As these simulated data sets must be both large and precise, their production is a CPU-intensive task. ATLAS has developed full and fast detector simulation

  7. On a construction of fast direct solvers

    Czech Academy of Sciences Publication Activity Database

    Práger, Milan

    2003-01-01

    Roč. 48, č. 3 (2003), s. 225-236 ISSN 0862-7940 Institutional research plan: CEZ:AV0Z1019905; CEZ:AV0Z1019905 Keywords : Poisson equation * boundary value problem * fast direct solver Subject RIV: BA - General Mathematics

  8. Advanced liquid metal fast breeder reactor designs

    International Nuclear Information System (INIS)

    Sayles, C.W.

    1978-01-01

    Fast Breeder reactor power plants in the 1000-1200 MW(e) range are being built overseas and are being designed in this country. While these reactors have many characteristics in common, a variety of different approaches have been adopted for some of the major features. Some of those alternatives are discussed

  9. Fine structure in fast drift storm bursts

    International Nuclear Information System (INIS)

    McConnell, D.; Ellis, G.R.A.

    1981-01-01

    Recent observations with high time resolution of fast drift storm (FDS) solar bursts are described. A new variety of FDS bursts characterised by intensity maxima regularly placed in the frequency domain is reported. Possible interpretations of this are mentioned and the implications of the short duration of FDS bursts are discussed. (orig.)

  10. Fast Moccasin: A Story of Arapaho Kinship.

    Science.gov (United States)

    Woodenlegs, Martha

    The story of Fast Moccasin, a 14-year-old Arapaho youth anxiously awaiting the annual Arapaho Pow-wow, is used to portray the kinship relationships of the Arapaho. Following the story is a 30-item quiz concerning relationships or relationship equivalents (blood relations, extended families, adopted families), naming procedures, and courtesies…

  11. Fast reconnection of weak magnetic fields

    International Nuclear Information System (INIS)

    Zweibel, E.G.

    1998-01-01

    Fast magnetic reconnection refers to annihilation or topological rearrangement of magnetic fields on a timescale that is independent (or nearly independent) of the plasma resistivity. The resistivity of astrophysical plasmas is so low that reconnection is of little practical interest unless it is fast. Yet, the theory of fast magnetic reconnection is on uncertain ground, as models must avoid the tendency of magnetic fields to pile up at the reconnection layer, slowing down the flow. In this paper it is shown that these problems can be avoided to some extent if the flow is three dimensional. On the other hand, it is shown that in the limited but important case of incompressible stagnation point flows, every flow will amplify most magnetic fields. Although examples of fast magnetic reconnection abound, a weak, disordered magnetic field embedded in stagnation point flow will in general be amplified, and should eventually modify the flow. These results support recent arguments against the operation of turbulent resistivity in highly conducting fluids. copyright 1998 American Institute of Physics

  12. Relationship between glycated haemoglobin and fasting plasma ...

    African Journals Online (AJOL)

    Background: Glycated haemoglobin (HbA1c) measurement provides an accurate result of glycaemic levels from blood drawn at any time of day without reference to prandial state. We established the relationship between HbA1c and fasting plasma glucose (FPG) in diabetic out-patients among diabetic outpatients in Lusaka ...

  13. Stem Cells Matter in Response to Fasting

    Directory of Open Access Journals (Sweden)

    Badi Sri Sailaja

    2015-12-01

    Full Text Available The molecular processes underlying intestinal adaptation to fasting and re-feeding remain largely uncharacterized. In this issue of Cell Reports, Richmond et al. report that dormant intestinal stem cells are regulated by PTEN and nutritional status.

  14. Global Perspectives on Fast-Food History.

    Science.gov (United States)

    Smith, Andrew F.

    This social studies curriculum unit teaches students in grades ten through twelve about the history and current impact of the fast food industry. The unit uses a topic familiar to students to foster critical thinking about history, geography, government, and economics. Lessons cover the origins of food, highlighting the Colombian Exchange; the…

  15. High power fast ramping power supplies

    Energy Technology Data Exchange (ETDEWEB)

    Marneris,I.; Bajon, E.; Bonati, R.; Sandberg, J.; Roser, T.; Tsoupas, N.

    2009-05-04

    Hundred megawatt level fast ramping power converters to drive proton and heavy ion machines are under research and development at accelerator facilities in the world. This is a leading edge technology. There are several topologies to achieve this power level. Their advantages and related issues will be discussed.

  16. Statistical measurements of fast changing electromagnetic fields

    NARCIS (Netherlands)

    Serra, Ramiro; Serra, Ramiro; Leferink, Frank Bernardus Johannes

    2010-01-01

    The present works aims at describing important statistical indexes such as the field uniformity, the field inhomogeneity and the statistics near the cavity walls for a special case of fast changing random electromagnetic fields. We generate this kind of electromagnetic environment by means of a

  17. Relationship between glycated haemoglobin and fasting plasma ...

    African Journals Online (AJOL)

    Emmanuel Musenge

    2016-07-30

    Jul 30, 2016 ... from blood drawn at any time of day without reference to prandial state. We established the relationship between HbA1c and fasting plasma glucose (FPG) in diabetic out-patients among diabetic outpatients in. Lusaka, Zambia. Methods: This cross-sectional study was carried out at the University Teaching ...

  18. Fast Fourier Transform Spectral Analysis Program

    Science.gov (United States)

    Daniel, J. A., Jr.; Graves, M. L.; Hovey, N. M.

    1969-01-01

    Fast Fourier Transform Spectral Analysis Program is used in frequency spectrum analysis of postflight, space vehicle telemetered trajectory data. This computer program with a digital algorithm can calculate power spectrum rms amplitudes and cross spectrum of sampled parameters at even time increments.

  19. Thyroid hormone metabolism during inflammation and fasting

    NARCIS (Netherlands)

    de Vries, E.M.

    2015-01-01

    Pathophysiological circumstances such as illness and fasting affect the hypothalamus-pituitary-thyroid (HPT)-axis. The illness induced alterations, collectively known as the non-thyroidal illness syndrome (NTIS) are characterized by decreased serum T3 and T4 concentrations, increased serum rT3

  20. Prototype fast breeder reactor main options

    International Nuclear Information System (INIS)

    Bhoje, S.B.; Chellapandi, P.

    1996-01-01

    Fast reactor programme gets importance in the Indian energy market because of continuous growing demand of electricity and resources limited to only coal and FBR. India started its fast reactor programme with the construction of 40 MWt Fast Breeder Test Reactor (FBTR). The reactor attained its first criticality in October 1985. The reactor power will be raised to 40 MWt in near future. As a logical follow-up of FBTR, it was decided to build a prototype fast breeder reactor, PFBR. Considering significant effects of capital cost and construction period on economy, systematic efforts are made to reduce the same. The number of primary and secondary sodium loops and components have been reduced. Sodium coolant, pool type concept, oxide fuel, 20% CW D9, SS 316 LN and modified 9Cr-1Mo steel (T91) materials have been selected for PFBR. Based on the operating experience, the integrity of the high temperature components including fuel and cost optimization aspects, the plant temperatures are recommended. Steam temperature of 763 K at 16.6 MPa and a single TG of 500 MWe gross output have been decided. PFBR will be located at Kalpakkam site on the coast of Bay of Bengal. The plant life is designed for 30 y and 75% load factor. In this paper the justifications for the main options chosen are given in brief. (author). 2 figs, 2 tabs