WorldWideScience

Sample records for surface work areas

  1. 30 CFR 56.17001 - Illumination of surface working areas.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Illumination of surface working areas. 56.17001... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Illumination § 56.17001 Illumination of surface working areas. Illumination sufficient to provide safe...

  2. 30 CFR 57.17001 - Illumination of surface working areas.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Illumination of surface working areas. 57.17001 Section 57.17001 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Illumination § 57.17001 Illumination of surface working areas. Illumination sufficient to provide safe...

  3. 77 FR 50165 - Escape and Evacuation Plans for Surface Coal Mines, Surface Facilities and Surface Work Areas of...

    Science.gov (United States)

    2012-08-20

    ... Administration. Title: Escape and Evacuation Plans for Surface Coal Mines, Surface Facilities ] and Surface Work... Safety and Health Administration Escape and Evacuation Plans for Surface Coal Mines, Surface Facilities and Surface Work Areas of Underground Coal Mines AGENCY: Mine Safety and Health Administration,...

  4. Ocular surface area and human eye blink frequency during VDU work

    DEFF Research Database (Denmark)

    Nielsen, Pernille Kofoed; Søgaard, Karen; Skotte, Jørgen

    2008-01-01

    The purpose of this study was to investigate how the ocular surface area (OSA) and the eye blink frequency (BF) are affected by a high versus a low-monitor position during visual display unit (VDU) work with varying cognitive demands. In a balanced randomized (2 x 2) design ten healthy subjects....... The low BF during the active task was succeded by a burst with high BF after cessation of the active task, indicating a compensatory blinking process. This stresses that interchange of work tasks with different cognitive load is as important as the monitor position in the prevention of visual...

  5. 78 FR 66071 - Proposed Information Collection; Slope and Shaft Sinking Plans (Pertains to Surface Work Areas of...

    Science.gov (United States)

    2013-11-04

    ... Safety and Health Administration Proposed Information Collection; Slope and Shaft Sinking Plans (Pertains to Surface Work Areas of Underground Coal Mines) AGENCY: Mine Safety and Health Administration, Labor... information collection for Slope and Shaft Sinking Plans, 30 CFR 77.1900. DATES: All comments must...

  6. 30 CFR 717.14 - Backfilling and grading of road cuts, mine entry area cuts, and other surface work areas.

    Science.gov (United States)

    2010-07-01

    ... to prevent leaching of toxic pollutants. Barren rock or similar materials excess to the mining... MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR INITIAL PROGRAM REGULATIONS UNDERGROUND MINING GENERAL PERFORMANCE STANDARDS § 717.14 Backfilling and grading of road cuts, mine entry area...

  7. Phoenix Work Area Animation

    Science.gov (United States)

    2008-01-01

    [figure removed for brevity, see original site] Click on image for animation This animation from Sol 1 shows a mosaic of the Phoenix digging area in the Martian terrain. Phoenix scientists are very pleased with this view as the terrain features few rocks an optimal place for digging. The mast of the camera looks disjointed because the photos that comprise this mosaic were taken at different times of day. This video also show some of the lander's instrumentation. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  8. Determination of retinal surface area.

    Science.gov (United States)

    Nagra, Manbir; Gilmartin, Bernard; Thai, Ngoc Jade; Logan, Nicola S

    2017-09-01

    Previous attempts at determining retinal surface area and surface area of the whole eye have been based upon mathematical calculations derived from retinal photographs, schematic eyes and retinal biopsies of donor eyes. 3-dimensional (3-D) ocular magnetic resonance imaging (MRI) allows a more direct measurement, it can be used to image the eye in vivo, and there is no risk of tissue shrinkage. The primary purpose of this study is to compare, using T2-weighted 3D MRI, retinal surface areas for superior-temporal (ST), inferior-temporal (IT), superior-nasal (SN) and inferior-nasal (IN) retinal quadrants. An ancillary aim is to examine whether inter-quadrant variations in area are concordant with reported inter-quadrant patterns of susceptibility to retinal breaks associated with posterior vitreous detachment (PVD). Seventy-three adult participants presenting without retinal pathology (mean age 26.25 ± 6.06 years) were scanned using a Siemens 3-Tesla MRI scanner to provide T2-weighted MR images that demarcate fluid-filled internal structures for the whole eye and provide high-contrast delineation of the vitreous-retina interface. Integrated MRI software generated total internal ocular surface area (TSA). The second nodal point was used to demarcate the origin of the peripheral retina in order to calculate total retinal surface area (RSA) and quadrant retinal surface areas (QRSA) for ST, IT, SN, and IN quadrants. Mean spherical error (MSE) was -2.50 ± 4.03D and mean axial length (AL) 24.51 ± 1.57 mm. Mean TSA and RSA for the RE were 2058 ± 189 and 1363 ± 160 mm(2) , respectively. Repeated measures anova for QRSA data indicated a significant difference within-quadrants (P area/mm increase in AL. Although the differences between QRSAs are relatively small, there was evidence of concordance with reported inter-quadrant patterns of susceptibility to retinal breaks associated with PVD. The data allow AL to be converted to QRSAs, which will assist further

  9. Monitoring System for ALICE Surface Areas

    CERN Document Server

    Demirbasci, Oguz

    2016-01-01

    I have been at CERN for 12 weeks within the scope of Summer Student Programme working on a monitoring system project for surface areas of the ALICE experiment during this period of time. The development and implementation of a monitoring system for environmental parameters in the accessible areas where a cheap hardware setup can be deployed were aim of this project. This report explains how it was developed by using Arduino, Raspberry PI, WinCC OA and DIM protocol.

  10. WRAP process area development control work plan

    Energy Technology Data Exchange (ETDEWEB)

    Leist, K.L., Fluor Daniel Hanford

    1997-02-27

    This work plan defines the manner in which the Waste Receiving and Processing Facility, Module I Process Area will be maintained under development control status. This status permits resolution of identified design discrepancies, control system changes, as-building of equipment, and perform modifications to increase process operability and maintainability as parallel efforts. This work plan maintains configuration control as these efforts are undertaken. This task will end with system testing and reissue of field verified design drawings.

  11. High surface area, high permeability carbon monoliths

    Energy Technology Data Exchange (ETDEWEB)

    Lagasse, R.R.; Schroeder, J.L. [Sandia National Labs., Albuquerque, NM (United States). Organic Materials Processing Dept.

    1994-12-31

    The goal of this work is to prepare carbon monoliths having precisely tailored pore size distribution. Prior studies have demonstrated that poly(acrylonitrile) can be processed into a precursor having tailored macropore structure. Since the macropores were preserved during pyrolysis, this synthetic process provided a route to porous carbon having macropores with size =0.1 to 10{mu}m. No micropores of size <2 nm could be detected in the carbon, however, by nitrogen adsorption. In the present work, the authors have processed a different polymer, poly(vinylidene chloride) into a macroporous precursor, Pyrolysis produced carbon monoliths having macropores derived from the polymer precursor as well as extensive microporosity produced during the pyrolysis of the polymer. One of these carbons had BET surface area of 1,050 m{sup 2}/g and about 1.2 cc/g total pore volume, with about 1/3 of the total pore volume in micropores and the remainder in 1{mu}m macropores. No mesopores in the intermediate size range could be detected by nitrogen adsorption. Carbon materials having high surface area as well as micron size pores have potential applications as electrodes for double layer supercapacitors containing liquid electrolyte, or as efficient media for performing chemical separations.

  12. Flyover Video of Phoenix Work Area

    Science.gov (United States)

    2008-01-01

    [figure removed for brevity, see original site] Click on image for animation This video shows an overhead view of NASA's Phoenix Mars Lander and the work area of the Robotic Arm. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  13. Body Surface Area Prediction in Odorrana grahami

    Institute of Scientific and Technical Information of China (English)

    Guiying CHEN; Jiongyu LIU; Qiang DAI; Jianping JIANG

    2014-01-01

    Body surface area (BSA) was regarded as a more readily quantiifable parameter relative to body mass in the normalization of comparative biochemistry and physiology. The BSA prediction has attracted unceasing research back more than a century on animals, especially on humans and rats. Few studies in this area for anurans were reported, and the equation for body surface area (S) and body mass (W):S=9.9 W 0.56, which was concluded from toads of four species in 1969, was generally adopted to estimate the body surface areas for anurans until recent years. However, this equation was not applicable to Odorrana grahami. The relationship between body surface area and body mass for this species was established as:S=15.4 W 0.579. Our current results suggest estimation equations should be used cautiously across different species and body surface area predictions on more species need to be conducted.

  14. Estimation of surface area and surface area measure of three-dimensional sets from digitizations

    DEFF Research Database (Denmark)

    Ziegel, Johanna; Kiderlen, Markus

    2010-01-01

    A local method for estimating surface area and surface area measure of three-dimensional objects from discrete binary images is presented. A weight is assigned to each 2 × 2 × 2 configuration of voxels and the total surface area of an object is given by summation of the local area contributions. ...

  15. Work Functions for Models of Scandate Surfaces

    Science.gov (United States)

    Mueller, Wolfgang

    1997-01-01

    The electronic structure, surface dipole properties, and work functions of scandate surfaces have been investigated using the fully relativistic scattered-wave cluster approach. Three different types of model surfaces are considered: (1) a monolayer of Ba-Sc-O on W(100), (2) Ba or BaO adsorbed on Sc2O3 + W, and (3) BaO on SC2O3 + WO3. Changes in the work function due to Ba or BaO adsorption on the different surfaces are calculated by employing the depolarization model of interacting surface dipoles. The largest work function change and the lowest work function of 1.54 eV are obtained for Ba adsorbed on the Sc-O monolayer on W(100). The adsorption of Ba on Sc2O3 + W does not lead to a low work function, but the adsorption of BaO results in a work function of about 1.6-1.9 eV. BaO adsorbed on Sc2O3 + WO3, or scandium tungstates, may also lead to low work functions.

  16. Surface computing and collaborative analysis work

    CERN Document Server

    Brown, Judith; Gossage, Stevenson; Hack, Chris

    2013-01-01

    Large surface computing devices (wall-mounted or tabletop) with touch interfaces and their application to collaborative data analysis, an increasingly important and prevalent activity, is the primary topic of this book. Our goals are to outline the fundamentals of surface computing (a still maturing technology), review relevant work on collaborative data analysis, describe frameworks for understanding collaborative processes, and provide a better understanding of the opportunities for research and development. We describe surfaces as display technologies with which people can interact directly, and emphasize how interaction design changes when designing for large surfaces. We review efforts to use large displays, surfaces or mixed display environments to enable collaborative analytic activity. Collaborative analysis is important in many domains, but to provide concrete examples and a specific focus, we frequently consider analysis work in the security domain, and in particular the challenges security personne...

  17. Surface moisture estimation in urban areas

    Science.gov (United States)

    Jiang, Yitong

    Surface moisture is an important parameter because it modifies urban microclimate and surface layer meteorology. The primary objectives of this paper are: 1) to analyze the impact of surface roughness from buildings on surface moisture in urban areas; and 2) to quantify the impact of surface roughness resulting from urban trees on surface moisture. To achieve the objectives, two hypotheses were tested: 1) the distribution of surface moisture is associated with the structural complexity of buildings in urban areas; and 2) The distribution and change of surface moisture is associated with the distribution and vigor of urban trees. The study area is Indianapolis, Indiana, USA. In the part of the morphology of urban trees, Warren Township was selected due to the limitation of tree inventory data. To test the hypotheses, the research design was made to extract the aerodynamic parameters, such as frontal areas, roughness length and displacement height of buildings and trees from Terrestrial and Airborne LiDAR data, then to input the aerodynamic parameters into the urban surface energy balance model. The methodology was developed for comparing the impact of aerodynamic parameters from LiDAR data with the parameters that were derived empirically from land use and land cover data. The analytical procedures are discussed below: 1) to capture the spatial and temporal variation of surface moisture, daily and hourly Land Surface Temperature (LST) were downscaled from 4 km to 1 km, and 960 m to 30 m, respectively, by regression between LST and various components that impact LST; 2) to estimate surface moisture, namely soil moisture and evapotranspiration (ET), land surfaces were classified into soil, vegetation, and impervious surfaces, using Linear Spectral Mixture Analysis (LSMA); 3) aerodynamic parameters of buildings and trees were extracted from Airborne and Terrestrial LiDAR data; 4) the Temperature-Vegetation-Index (TVX) method, and the Two-Source-Energy-Balance (TSEB

  18. Area inequalities for stable marginally trapped surfaces

    CERN Document Server

    Jaramillo, José Luis

    2012-01-01

    We discuss a family of inequalities involving the area, angular momentum and charges of stably outermost marginally trapped surfaces in generic non-vacuum dynamical spacetimes, with non-negative cosmological constant and matter sources satisfying the dominant energy condition. These inequalities provide lower bounds for the area of spatial sections of dynamical trapping horizons, namely hypersurfaces offering quasi-local models of black hole horizons. In particular, these inequalities represent particular examples of the extension to a Lorentzian setting of tools employed in the discussion of minimal surfaces in Riemannian contexts.

  19. Osmosis and Surface Area to Volume Ratio.

    Science.gov (United States)

    Barrett, D. R. B.

    1984-01-01

    Describes an experiment designed to help students understand the concepts of osmosis and surface area to volume ratio (SA:VOL). The task for students is to compare water uptake in different sizes of potato cubes and relate differences to their SA:VOL ratios. (JN)

  20. Volumes and surface areas of pendular rings

    Science.gov (United States)

    Rose, W.

    1958-01-01

    A packing of spheres is taken as a suitable model of porous media. The packing may be regular and the sphere size may be uniform, but in general, both should be random. Approximations are developed to give the volumes and surface areas of pendular rings that exist at points of sphere contact. From these, the total free volume and interfacial specific surface area are derived as expressive of the textural character of the packing. It was found that the log-log plot of volumes and surface areas of pendular rings vary linearly with the angle made by the line joining the sphere centers and the line from the center of the largest sphere to the closest edge of the pendular ring. The relationship, moreover, was found not to be very sensitive to variation in the size ratio of the spheres in contact. It also was found that the addition of pendular ring material to various sphere packings results in an unexpected decrease in the surface area of the boundaries that confine the resulting pore space. ?? 1958 The American Institute of Physics.

  1. Smart work centres in rural areas

    DEFF Research Database (Denmark)

    Lorentzen, Anne Birte

    This paper discusses the establishment of telework centres as an element in local development strategies in rural areas, with a particular view to two new telework centres in region North Denmark. The paper argues that telework centres do not represent an easy solution to problems of local develo...... development and environmental sustainability, and further, that technology may not even be the most important feature needed to make them function as such....

  2. High surface area fibrous silica nanoparticles

    KAUST Repository

    Polshettiwar, Vivek

    2014-11-11

    Disclosed are high surface area nanoparticles that have a fibrous morphology. The nanoparticles have a plurality of fibers, wherein each fiber is in contact with one other fiber and each fiber has a length of between about 1 nm and about 5000 nm. Also disclosed are applications of the nanoparticles of the present invention, and methods of fabrication of the nanoparticles of the present invention.

  3. Palatal Surface Area of Maxillary Plaster Casts

    DEFF Research Database (Denmark)

    Darvann, Tron Andre; Hermann, Nuno V.; Ersbøll, Bjarne Kjær

    2007-01-01

    Objective: To investigate the relationship between corresponding two-dimensional and three-dimensional measurements on maxillary plaster casts taken from photographs and three-dimensional surface scans, respectively. Materials and Methods: Corresponding two-dimensional and three-dimensional measu......Objective: To investigate the relationship between corresponding two-dimensional and three-dimensional measurements on maxillary plaster casts taken from photographs and three-dimensional surface scans, respectively. Materials and Methods: Corresponding two-dimensional and three......-dimensional measurements of selected linear distances, curve lengths, and (surface) areas were carried out on maxillary plaster casts from individuals with unilateral or bilateral cleft lip and palate. The relationship between two-dimensional and three-dimensional measurements was investigated using linear regression....... Results and Conclusions: Error sources in the measurement of three-dimensional palatal segment surface area from a two-dimensional photograph were identified as photographic distortion (2.7%), interobserver error (3.3%), variability in the orientation of the plaster cast (3.2%), and natural shape...

  4. Nondestructive, stereological estimation of canopy surface area

    DEFF Research Database (Denmark)

    Wulfsohn, Dvora-Laio; Sciortino, Marco; Aaslyng, Jesper M.

    2010-01-01

    with sampling fraction equal to 1/9 followed by point counting using a 4.3 cm2/point grid produced a coefficient of error of less than 7%. The smooth fractionator can be used to ensure that the additional contribution to the estimator variance due to between-plant variability is small.......We describe a stereological procedure to estimate the total leaf surface area of a plant canopy in vivo, and address the problem of how to predict the variance of the corresponding estimator. The procedure involves three nested systematic uniform random sampling stages: (i) selection of plants from...

  5. Work plan for the remedial investigation/feasibility study for the groundwater operable units at the Chemical Plant Area and the Ordnance Works Area, Weldon Spring, Missouri

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    US Department of Energy (DOE) and the US Army Corps of Engineers (CE) are conducting cleanup activities at two properties, the chemical plant area and the ordnance works area, located adjacent to one another in St. Charles County, Missouri. In accordance with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), as amended, DOE and CE are evaluating conditions and potential responses at the chemical plant area and at the ordnance works area, respectively, to address groundwater and surface water contamination. This work plan provides a comprehensive evaluation of areas that are relevant to the (GWOUs) of both the chemical plant and the ordnance works area. Following areas or media are addressed in this work plan: groundwater beneath the chemical plant area (including designated vicinity properties described in Section 5 of the RI for the chemical plant area [DOE 1992d]) and beneath the ordnance works area; surface water and sediment at selected springs, including Burgermeister Spring. The organization of this work plan is as follows: Chapter 1 discusses the objectives for conducting the evaluation, including a summary of relevant site information and overall environmental compliance activities to be undertaken; Chapter 2 presents a history and a description of the site and areas addressed within the GWOUs, along with currently available data; Chapter 3 presents a preliminary evaluation of areas included in the GWOUs, which is based on information given in Section 2, and discusses data requirements; Chapter 4 presents rationale for data collection or characterization activities to be carried out in the remedial investigation (RI) phase, along with brief summaries of supporting documents ancillary to this work plan; Chapter 5 discusses the activities planned for GWOUs under each of the 14 tasks for an remedial (RI/FS); Chapter 6 presents proposed schedules for RI/FS for the GWOUS; and Chapter 7 explains the project management structure.

  6. Accessible surface area from NMR chemical shifts

    Energy Technology Data Exchange (ETDEWEB)

    Hafsa, Noor E.; Arndt, David; Wishart, David S., E-mail: david.wishart@ualberta.ca [University of Alberta, Department of Computing Science (Canada)

    2015-07-15

    Accessible surface area (ASA) is the surface area of an atom, amino acid or biomolecule that is exposed to solvent. The calculation of a molecule’s ASA requires three-dimensional coordinate data and the use of a “rolling ball” algorithm to both define and calculate the ASA. For polymers such as proteins, the ASA for individual amino acids is closely related to the hydrophobicity of the amino acid as well as its local secondary and tertiary structure. For proteins, ASA is a structural descriptor that can often be as informative as secondary structure. Consequently there has been considerable effort over the past two decades to try to predict ASA from protein sequence data and to use ASA information (derived from chemical modification studies) as a structure constraint. Recently it has become evident that protein chemical shifts are also sensitive to ASA. Given the potential utility of ASA estimates as structural constraints for NMR we decided to explore this relationship further. Using machine learning techniques (specifically a boosted tree regression model) we developed an algorithm called “ShiftASA” that combines chemical-shift and sequence derived features to accurately estimate per-residue fractional ASA values of water-soluble proteins. This method showed a correlation coefficient between predicted and experimental values of 0.79 when evaluated on a set of 65 independent test proteins, which was an 8.2 % improvement over the next best performing (sequence-only) method. On a separate test set of 92 proteins, ShiftASA reported a mean correlation coefficient of 0.82, which was 12.3 % better than the next best performing method. ShiftASA is available as a web server ( http://shiftasa.wishartlab.com http://shiftasa.wishartlab.com ) for submitting input queries for fractional ASA calculation.

  7. Body surface area formulae: an alarming ambiguity.

    Science.gov (United States)

    Redlarski, Grzegorz; Palkowski, Aleksander; Krawczuk, Marek

    2016-06-21

    Body surface area (BSA) plays a key role in several medical fields, including cancer chemotherapy, transplantology, burn treatment and toxicology. BSA is often a major factor in the determination of the course of treatment and drug dosage. A series of formulae to simplify the process have been developed. Because easy-to-identify, yet general, body coefficient results of those formulae vary considerably, the question arises as to whether the choice of a particular formula is valid and safe for patients. Here we show that discrepancies between most of the known BSA formulae can reach 0.5 m(2) for the standard adult physique. Although many previous studies have demonstrated that certain BSA formulae provide an almost exact fit with the patients examined, all of these studies have been performed on a limited and isolated group of people. Our analysis presents a broader perspective, considering 25 BSA formulae. The analysis revealed that the choice of a particular formula is a difficult task. Differences among calculations made by the formulae are so great that, in certain cases, they may considerably affect patients' mortality, especially for people with an abnormal physique or for children.

  8. Casimir effect in dielectrics Surface area contribution

    CERN Document Server

    Molina-Paris, C; Molina-Paris, Carmen; Visser, Matt

    1997-01-01

    In this paper we take a deeper look at the technically elementary but physically robust viewpoint in which the Casimir energy in dielectric media is interpreted as the change in the total zero point energy of the electromagnetic vacuum summed over all states. Extending results presented in previous papers [hep-th/9609195; hep-th/9702007] we approximate the sum over states by an integral over the density of states including finite volume corrections. For an arbitrarily-shaped finite dielectric, the first finite-volume correction to the density of states is shown to be proportional to the surface area of the dielectric interface and is explicitly evaluated as a function of the permeability and permitivity. Since these calculations are founded in an elementary and straightforward way on the underlying physics of the Casimir effect they serve as an important consistency check on field-theoretic calculations. As a concrete example we discuss Schwinger's suggestion that the Casimir effect might be the underlying ph...

  9. Surface area and conductivity of polyaniline synthesized under UV irradiation

    Science.gov (United States)

    Budi, S.; Fitri, E.; Paristiowati, M.; Cahyana, U.; Pusparini, E.; Nasbey, H.; Imaddudin, A.

    2017-02-01

    This paper reports our study on the synthesis of high electrical conductivity and surface area polyaniline using oxidative polymerization under UV light irradiation. The formation of emeraldine structures of polyaniline was revealed by major absorption bands of FTIR (Fourier transform infrared spectroscopy) spectra attributed to C-N stretching, C=C stretching in the benzenoid ring, C=C stretching in the quinoid ring and QNH+B stretching. XRD (X-ray diffractometer) measurements confirmed typical diffraction patterns with a crystallinity of 13% and 16% for polyaniline prepared under non-stirred and stirred reaction, respectively. SEM (Scanning electron microscope) studies showed more uniform morphology of polyaniline was obtained with stirring reaction process compare to those prepared without stirring. Surface analysis using SAA (surface area analyzer) showed that pure polyaniline with the relatively high surface area of ca.28 m2/g was successfully prepared in this work. Based on four point probe measurement, the prepared polyaniline possesses high conductivity which is important in electrode application.

  10. Method for treatment of a surface area of steel

    NARCIS (Netherlands)

    Bhowmik, S.; Aaldert, P.J.

    2009-01-01

    The invention relates to a method for treatment of a surface area of steel by polishing said surface area and performing a plasma treatment of said surface area wherein the plasma treatment is performed at at least atmospheric conditions and wherein the plasma treatment is carried out at a power of

  11. Excess Surface Area in Bioelectrochemical Systems Causes ion Transport Limitations

    Energy Technology Data Exchange (ETDEWEB)

    Harrington, Timothy D.; Babauta, Jerome T.; Davenport, Emily K.; Renslow, Ryan S.; Beyenal, Haluk

    2015-05-01

    We investigated ion transport limitations on 3D graphite felt electrodes by growing Geobacter sulfurreducens biofilms with advection to eliminate external mass transfer limitations. We characterized ion transport limitations by: (i) showing that serially increasing NaCl concentration up to 200mM increased current linearly up to a total of þ273% vs. 0mM NaCl under advective conditions; (ii) growing the biofilm with a starting concentration of 200mM NaCl, which led to a maximum current increase of 400% vs. current generation without NaCl, and (iii) showing that un-colonized surface area remained even after steadystate current was reached. After accounting for iR effects, we confirmed that the excess surface area existed despite a non-zero overpotential. The fact that the biofilm was constrained from colonizing and producing further current under these conditions confirmed the biofilms under study here were ion transport-limited. Our work demonstrates that the use of high surface area electrodes may not increase current density when the system design allows ion transport limitations to become dominant.

  12. Photoelectric scanner makes detailed work function maps of metal surface

    Science.gov (United States)

    Rasor, N. S.

    1966-01-01

    Photoelectric scanning device maps the work function of a metal surface by scanning it with a light spot and measuring the resulting photocurrent. The device is capable of use over a range of surface temperatures.

  13. Cost increase assessment in works of informal urban development areas

    OpenAIRE

    Bezerra, Maria do Carmo de Lima

    2016-01-01

    In recent decades, investments in the development of informal low-income settlements occurred more frequently in areas that had received urban improvements. These projects have a number of factors that hinder interventions, such as the environmental fragility and the difficulty of access to areas of work. The objective of the research is to identify the feasibility of these interventions that aim to always keep people in their place of residence, considering as a limiting factor, environmenta...

  14. SurfaceWater Source Protection Areas (SPAs)

    Data.gov (United States)

    Vermont Center for Geographic Information — Source Protection Area (SPA) boundaries have been located on RF 24000 & RF 25000 scale USGS topographic maps by Water Supply Division (DEC) and VT Dept of Health...

  15. Optimization of daylight for energy conservation at working areas

    Energy Technology Data Exchange (ETDEWEB)

    Aydinli, S.; Krochmann

    1983-03-01

    In factories and working areas large windows provide for better and longer illumination by daylight and cut down on energy cost of artificial lighting. On the other hand, they increase heating cost owing to their reduced heat insulation. With the planning of large building projects, therefore, luminous intensities at operational areas have to be calculated in such a way as to allow dimensioning of window areas while accounting for the factory mentioned so that total cost of construction and operation of the building and the energy consumption are minimized. Formulas are given for the daylight ratio, length of utilization and radiation capacity entering the space as are various methods for their calculation.

  16. On semiautomatic estimation of surface area

    DEFF Research Database (Denmark)

    Dvorak, J.; Jensen, Eva B. Vedel

    2013-01-01

    . For convex particles, the estimator is equal to four times the area of the support set (flower set) of the particle transect. We study the statistical properties of the flower estimator and compare its performance to that of two discretizations of the flower estimator, namely the pivotal estimator...

  17. Sensor for the working surface cleanliness definition in vacuum

    Science.gov (United States)

    Deulin, E. A.; Mashurov, S. S.; Gatsenko, A. A.

    2016-07-01

    Modern development of nanotechnology as one of the modern science priority directions is impossible to imagine without the use of vacuum systems and technologies. And the better the vacuum (lower the pressure), the “cleaner” we get a surface, which is very important for nanotechnology. Determination of the cleanliness of the surface or the amount of molecular layers of adsorbed gases on the working surface of the products especially in industry, where the cleanliness of the working surface is a key parameter of the technological process and has a significant influence on the output parameters of the final product is the main goal of this work.

  18. The Surface Chemical Properties of Novel High Surface Area Solids ...

    African Journals Online (AJOL)

    and MFA3 are the result of the high chromium content in the original ash (UFA1). ... ties has a significant influence on the crystal form produced during zeolite ... that the surface is enriched in Si compared with the bulk compo- sition. This is ...

  19. Assessing emergency situations and their aftermath in urban areas: The EMRAS II Urban Areas Working Group

    DEFF Research Database (Denmark)

    Thiessen, K.M.; Andersson, Kasper Grann; Berkovskyy, V.

    2011-01-01

    The Urban Areas Working Group is part of the International Atomic Energy Agency’s EMRAS II (Environmental Modelling for Radiation Safety) Programme. The goal of this Working Group is to test and improve the capabilities of models used in assessment of radioactive contamination in urban settings, ...

  20. Why Do We Need the Derivative for the Surface Area?

    Science.gov (United States)

    Hristova, Yulia; Zeytuncu, Yunus E.

    2016-01-01

    Surface area and volume computations are the most common applications of integration in calculus books. When computing the surface area of a solid of revolution, students are usually told to use the frustum method instead of the disc method; however, a rigorous explanation is rarely provided. In this note, we provide one by using geometric…

  1. Surface energy and work function of elemental metals

    DEFF Research Database (Denmark)

    Skriver, Hans Lomholt; Rosengaard, N. M.

    1992-01-01

    are in excellent agreement with a recent full-potential, all-electron, slab-supercell calculation of surface energies and work functions for the 4d metals. The present calculations explain the trend exhibited by the surface energies of the alkali, alkaline earth, divalent rare-earth, 3d, 4d, and 5d transition......We have performed an ab initio study of the surface energy and the work function for six close-packed surfaces of 40 elemental metals by means of a Green’s-function technique, based on the linear-muffin-tin-orbitals method within the tight-binding and atomic-sphere approximations. The results...... and noble metals, as derived from the surface tension of liquid metals. In addition, they give work functions which agree with the limited experimental data obtained from single crystals to within 15%, and explain the smooth behavior of the experimental work functions of polycrystalline samples...

  2. Indexing aortic valve area by body surface area increases the prevalence of severe aortic stenosis

    DEFF Research Database (Denmark)

    Jander, Nikolaus; Gohlke-Bärwolf, Christa; Bahlmann, Edda

    2014-01-01

    To account for differences in body size in patients with aortic stenosis, aortic valve area (AVA) is divided by body surface area (BSA) to calculate indexed AVA (AVAindex). Cut-off values for severe stenosis are......To account for differences in body size in patients with aortic stenosis, aortic valve area (AVA) is divided by body surface area (BSA) to calculate indexed AVA (AVAindex). Cut-off values for severe stenosis are...

  3. Work function anisotropy and surface stability of half-metallic CrO(2)

    NARCIS (Netherlands)

    Attema, J. J.; Uijttewaal, M. A.; de Wijs, G. A.; de Groot, R. A.

    2008-01-01

    Insight in the interplay between work function and stability is important for many areas of physics. In this paper, we calculate the anisotropy in the work function and the surface stability of CrO(2), a prototype half-metal, and find an anisotropy of 3.8 eV. An earlier model for the relation betwee

  4. Work function anisotropy and surface stability of half-metallic CrO(2)

    NARCIS (Netherlands)

    Attema, J. J.; Uijttewaal, M. A.; de Wijs, G. A.; de Groot, R. A.

    Insight in the interplay between work function and stability is important for many areas of physics. In this paper, we calculate the anisotropy in the work function and the surface stability of CrO(2), a prototype half-metal, and find an anisotropy of 3.8 eV. An earlier model for the relation

  5. Christian Faith Rush in Rural Areas and Social Work Intervention

    Institute of Scientific and Technical Information of China (English)

    ZHAO Jian-ling; WANG Shu-min

    2012-01-01

    To make the public have rational knowledge of the Christian faith rush in rural areas and guide coordinated development of Christianity with the socialist society, we analyzed reasons and complex influence on rural social development from aspects of society and individual and attraction of Christianity by the Literature Analysis Method. In view of its negative effect, we put forward several countermeasures from the perspective of social work intervention, such as improving farmers’ overall qualities, promoting effective implementation of social security system, and correcting believers’ understanding of Christianity. Finally, we introduced situation of Christian faith in other countries and reference and directive significance to China.

  6. MOISTURE AND SURFACE AREA MEASUREMENTS OF PLUTONIUM-BEARING OXIDES

    Energy Technology Data Exchange (ETDEWEB)

    Crowder, M.; Duffey, J.; Livingston, R.; Scogin, J.; Kessinger, G.; Almond, P.

    2009-09-28

    To ensure safe storage, plutonium-bearing oxides are stabilized at 950 C for at least two hours in an oxidizing atmosphere. Stabilization conditions are expected to decompose organic impurities, convert metals to oxides, and result in moisture content below 0.5 wt%. During stabilization, the specific surface area is reduced, which minimizes readsorption of water onto the oxide surface. Plutonium oxides stabilized according to these criteria were sampled and analyzed to determine moisture content and surface area. In addition, samples were leached in water to identify water-soluble chloride impurity content. Results of these analyses for seven samples showed that the stabilization process produced low moisture materials (< 0.2 wt %) with low surface area ({le} 1 m{sup 2}/g). For relatively pure materials, the amount of water per unit surface area corresponded to 1.5 to 3.5 molecular layers of water. For materials with chloride content > 360 ppm, the calculated amount of water per unit surface area increased with chloride content, indicating hydration of hygroscopic salts present in the impure PuO{sub 2}-containing materials. The low moisture, low surface area materials in this study did not generate detectable hydrogen during storage of four or more years.

  7. Low work function of the Ca2N surface

    NARCIS (Netherlands)

    Uijttewaal, M.A.; Wijs, G.A. de; Groot, R.A. de

    2004-01-01

    Polymer diodes require cathodes that do not corrode the polymer but do have low work function to minimize the electron injection barrier. First-principles calculations demonstrate that the work function of the (1000) surface of the compound Ca2N is half an eV lower than that of the elemental metal C

  8. Some Inequalities for Lp-mixed Affine Surface Area

    Institute of Scientific and Technical Information of China (English)

    ZHU Xian-yang

    2012-01-01

    In this paper,the concepts of the ith Lp-mixed affine surface area and Lp-polar curvature images are introduced,some new inequalities connecting these new notions with Lp-centroid bodies and p-Blaschke bodies are showed.Moreover,a Blaschke-Santaló type inequality for Lp-mixed affine surface area is established.Our results also imply the similar to the inequalities for Marcus-Lopes,Bergstrom and Ky Fan.

  9. High surface area carbon and process for its production

    Science.gov (United States)

    Romanos, Jimmy; Burress, Jacob; Pfeifer, Peter; Rash, Tyler; Shah, Parag; Suppes, Galen

    2016-12-13

    Activated carbon materials and methods of producing and using activated carbon materials are provided. In particular, biomass-derived activated carbon materials and processes of producing the activated carbon materials with prespecified surface areas and pore size distributions are provided. Activated carbon materials with preselected high specific surface areas, porosities, sub-nm (carbon consumption and metallic potassium intercalation into the carbon lattice during the activation process.

  10. Determination of Reactive Surface Area of Melt Glass

    Energy Technology Data Exchange (ETDEWEB)

    Bourcier,W.L.; Roberts, S.; Smith, D.K.; Hulsey, S.; Newton,L.; Sawvel, A.; Bruton, C.; Papelis, C.; Um, W.; Russell, C. E.; Chapman,J.

    2000-10-01

    A comprehensive investigation of natural and manmade silicate glasses, and nuclear melt glass was undertaken in order to derive an estimate of glass reactive surface area. Reactive surface area is needed to model release rates of radionuclides from nuclear melt glass in the subsurface. Because of the limited availability of nuclear melt glasses, natural volcanic glass samples were collected which had similar textures and compositions as those of melt glass. A flow-through reactor was used to measure the reactive surface area of the analog glasses in the presence of simplified NTS site ground waters. A measure of the physical surface area of these glasses was obtained using the BET gas-adsorption method. The studies on analog glasses were supplemented by measurement of the surface areas of pieces of actual melt glass using the BET method. The variability of the results reflect the sample preparation and measurement techniques used, as well as textural heterogeneity inherent to these samples. Based on measurements of analog and actual samples, it is recommended that the hydraulic source term calculations employ a range of 0.001 to 0.01 m{sup 2}/g for the reactive surface area of nuclear melt glass.

  11. Quantifying object and material surface areas in residences

    Energy Technology Data Exchange (ETDEWEB)

    Hodgson, Alfred T.; Ming, Katherine Y.; Singer, Brett C.

    2005-01-05

    The dynamic behavior of volatile organic compounds (VOCs) in indoor environments depends, in part, on sorptive interactions between VOCs in the gas phase and material surfaces. Since information on the types and quantities of interior material surfaces is not generally available, this pilot-scale study was conducted in occupied residences to develop and demonstrate a method for quantifying surface areas of objects and materials in rooms. Access to 33 rooms in nine residences consisting of bathrooms, bedroom/offices and common areas was solicited from among research group members living in the East San Francisco Bay Area. A systematic approach was implemented for measuring rooms and objects from 300 cm{sup 2} and larger. The ventilated air volumes of the rooms were estimated and surface area-to-volume ratios were calculated for objects and materials, each segregated into 20 or more categories. Total surface area-to-volume ratios also were determined for each room. The bathrooms had the highest total surface area-to-volume ratios. Bedrooms generally had higher ratios than common areas consisting of kitchens, living/dining rooms and transitional rooms. Total surface area-to-volume ratios for the 12 bedrooms ranged between 2.3 and 4.7 m{sup 2} m{sup -3}. The importance of individual objects and materials with respect to sorption will depend upon the sorption coefficients for the various VOC/materials combinations. When combined, the highly permeable material categories, which may contribute to significant interactions, had a median ratio of about 0.5 m{sup 2} m{sup -3} for all three types of rooms.

  12. Precision nanometrology of a large area microstructured metrology surface

    Institute of Scientific and Technical Information of China (English)

    WEI Gao; TAKESHI Araki; SATOSHI Kiyono

    2003-01-01

    @@ 1 Introduction The authors have been working on a newsurface encoder for detecting multi-degree-of-freedom(MDOF) translational and tilt motionsof precision stages[1]. The surface encoder con-sists of two fundamental elements: a sinusoidalmicrostructured metrology surface, which is re-ferred to as the angle grid, and a two-dimension-al (2D) slope sensor[2-3].

  13. Surface area considerations for corroding N reactor fuel

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, A.B. Jr.; Pitner, A.L.

    1996-06-01

    The N Reactor fuel is corroding at sites where the Zircaloy cladding was damaged when the fuel was discharged from the reactor. Corroding areas are clearly visible on the fuel stored in open cans in the K East Basin. There is a need to estimate the area of the corroding uranium to analyze aspects of fuel behavior as it is transitioned. from current wet storage to dry storage. In this report, the factors that contribute to {open_quotes}true{close_quotes} surface area are analyzed in terms of what is currently known about the N Reactor fuel. Using observations from a visual examinations of the fuel in the K East wet storage facility, a value for the corroding geometric area is estimated. Based on observations of corroding uranium and surface roughness values for other metals, a surface roughness factor is also estimated and applied to the corroding K East fuel to provide an estimated {open_quotes}true{close_quotes} surface area. While the estimated area may be modified as additional data become available from fuel characterization studies, the estimate provides a basis to assess effects of exposed uranium metal surfaces on fuel behavior in operations involved in transitioning from wet to dry storage, during shipment and staging, conditioning, and dry interim storage.

  14. Recommended values of clean metal surface work functions

    Energy Technology Data Exchange (ETDEWEB)

    Derry, Gregory N., E-mail: gderry@loyola.edu; Kern, Megan E.; Worth, Eli H. [Department of Physics, Loyola University Maryland, 4501 N. Charles St., Baltimore, Maryland 21210 (United States)

    2015-11-15

    A critical review of the experimental literature for measurements of the work functions of clean metal surfaces of single-crystals is presented. The tables presented include all results found for low-index crystal faces except cases that were known to be contaminated surfaces. These results are used to construct a recommended value of the work function for each surface examined, along with an uncertainty estimate for that value. The uncertainties are based in part on the error distribution for all measured work functions in the literature, which is included here. The metals included in this review are silver (Ag), aluminum (Al), gold (Au), copper (Cu), iron (Fe), iridium (Ir), molybdenum (Mo), niobium (Nb), nickel (Ni), palladium (Pd), platinum (Pt), rhodium (Rh), ruthenium (Ru), tantalum (Ta), and tungsten (W)

  15. The dynamics of internal working surfaces in MHD jets

    CERN Document Server

    De Colle, Fabio; Esquivel, Alejandro

    2008-01-01

    The dynamical effects of magnetic fields in models of radiative, Herbig-Haro (HH) jets have been studied in a number of papers. For example, magnetized, radiative jets from variable sources have been studied with axisymmetric and 3D numerical simulations. In this paper, we present an analytic model describing the effect of a toroidal magnetic field on the internal working surfaces that result from a variability in the ejection velocity. We find that for parameters appropriate for HH jets the forces associated with the magnetic field dominate over the gas pressure force within the working surfaces. Depending on the ram pressure radial cross section of the jet, the magnetic field can produce a strong axial pinch, or, alternatively, a broadening of the internal working surfaces. We check the validity of the analytic model with axisymmetric numerical simulations of variable, magnetized jets.

  16. Assessment of dialyzer surface in online hemodiafiltration; objective choice of dialyzer surface area

    Directory of Open Access Journals (Sweden)

    Francisco Maduell

    2015-05-01

    Conclusion: The increase in 40% and 80% of dialyzer surface area entails an increase in convective volume of 6 and 16% respectively, showing minimal differences both in convective volume and clearance capacity when UFC was greater than 45 mL/h/mmHg. It is advisable to optimise dialyser efficiency to the smallest surface area possible, adjusting treatment prescription.

  17. A framework for predicting surface areas in microporous coordination polymers.

    Science.gov (United States)

    Schnobrich, Jennifer K; Koh, Kyoungmoo; Sura, Kush N; Matzger, Adam J

    2010-04-20

    A predictive tool termed the linker to metal cluster (LiMe) ratio is introduced as a method for understanding surface area in microporous coordination polymers (MCPs). Calibrated with geometric accessible surface area computations, the LiMe ratio uses molecular weight of building block components to indicate the maximum attainable surface area for a given linker and metal cluster combination. MOF-5 and HKUST-1 are used as prototypical structures to analyze MCPs with octahedral M(4)O(CO(2)R)(6) and paddlewheel M(2)(CO(2)R)(4) metal clusters. Insight into the effects of linker size, geometry, number of coordinating groups, and framework interpenetration is revealed through the LiMe ratio analysis of various MCPs. Experimental surface area deviation provides indication that a material may suffer from incomplete guest removal, structural collapse, or interpenetration. Because minimal data input are required, the LiMe ratio surface area analysis is suggested as a quick method for experimental verification as well as a guide for the design of new materials.

  18. Can foot anthropometric measurements predict dynamic plantar surface contact area?

    Directory of Open Access Journals (Sweden)

    Collins Natalie

    2009-10-01

    Full Text Available Abstract Background Previous studies have suggested that increased plantar surface area, associated with pes planus, is a risk factor for the development of lower extremity overuse injuries. The intent of this study was to determine if a single or combination of foot anthropometric measures could be used to predict plantar surface area. Methods Six foot measurements were collected on 155 subjects (97 females, 58 males, mean age 24.5 ± 3.5 years. The measurements as well as one ratio were entered into a stepwise regression analysis to determine the optimal set of measurements associated with total plantar contact area either including or excluding the toe region. The predicted values were used to calculate plantar surface area and were compared to the actual values obtained dynamically using a pressure sensor platform. Results A three variable model was found to describe the relationship between the foot measures/ratio and total plantar contact area (R2 = 0.77, p R2 = 0.76, p Conclusion The results of this study indicate that the clinician can use a combination of simple, reliable, and time efficient foot anthropometric measurements to explain over 75% of the plantar surface contact area, either including or excluding the toe region.

  19. STEREOLOGICAL ESTIMATION OF SURFACE AREA FROM DIGITAL IMAGES

    Directory of Open Access Journals (Sweden)

    Johanna Ziegel

    2011-05-01

    Full Text Available A sampling design of local stereology is combined with a method from digital stereology to yield a novel estimator of surface area based on counts of configurations observed in a digitization of an isotropic 2- dimensional slice with thickness s. As a tool, a result of the second author and J. Rataj on infinitesimal increase of volumes of morphological transforms is refined and used. The proposed surface area estimator is asymptotically unbiased in the case of sets contained in the ball centred at the origin with radius s and in the case of balls centred at the origin with unknown radius. For general shapes bounds for the asymptotic expected relative worst case error are given. A simulation example is discussed for surface area estimation based on 2×2×2-configurations.

  20. The "nylon T" intrauterine device: surface area versus copper adjunct.

    Science.gov (United States)

    Kamal, I; Shaaban, H; Ezzat, R; Zaki, S

    1981-04-01

    A study to evaluate the relative effect of copper ions and increased surface area added through the wiring of the stem of the inert "T" device was performed. The experimental design was set up to test a hypothesis that the effectiveness of a copper device is a result of the increase in surface area of the IUD and not a result of the copper itself. Ninety-eight TCu 200 mm2 devices were stripped of their copper wire and rewound with a "nylon" thread of the same length, caliber and surface area. the devices were then repacked and gas sterilized. The 98 "nylon T" devices were fitted early in 1977 and followed up for 2 years. The major finding was that the replacement of copper wire on the "copper T" device by a "nylon" thread, "nylon T", had shown a comparable antifertility effect.

  1. Observed Asteroid Surface Area in the Thermal Infrared

    Science.gov (United States)

    Nugent, C. R.; Mainzer, A.; Masiero, J.; Wright, E. L.; Bauer, J.; Grav, T.; Kramer, E.; Sonnett, S.

    2017-02-01

    The rapid accumulation of thermal infrared observations and shape models of asteroids has led to increased interest in thermophysical modeling. Most of these infrared observations are unresolved. We consider what fraction of an asteroid’s surface area contributes the bulk of the emitted thermal flux for two model asteroids of different shapes over a range of thermal parameters. The resulting observed surface in the infrared is generally more fragmented than the area observed in visible wavelengths, indicating high sensitivity to shape. For objects with low values of the thermal parameter, small fractions of the surface contribute the majority of thermally emitted flux. Calculating observed areas could enable the production of spatially resolved thermal inertia maps from non-resolved observations of asteroids.

  2. Chestnut Ridge Borrow Area Waste Pile work plan

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, R. (Oak Ridge Y-12 Plant, TN (United States))

    1991-08-01

    The US Department of Energy (DOE), through its contractor Martin Marietta Energy Systems, Inc., has constructed a storage facility, the Chestnut Ridge Borrow Area Waste Pile (CRBAWP), for mercury-contaminated soil excavated from the Oak Ridge Civic Center properties and the Oak Ridge Sewer Line Beltway. Excavation of the soil from the Civic Center began in September 1984 and was completed in early 1985. Similar soils from other areas of the city were added to the pile until 1987. Approximately 3000 yd{sup 3} are stored at the present time. An Interim Status RCRA permit was initially sought for this facility. Samples from the waste pile passed the Extraction Procedure Toxicity Test (EP Tox). The Tennessee Department of Health and Environment (now the Tennessee Department of Conservation-TDC) denied the permit based on their conclusion that the waste was not a RCRA-regulated waste. On September 25, 1990 the Toxicity Characteristic Leaching Procedure (TCLP) superseded the EP Tox test. TCLP tests are not proposed to satisfy a request by TDC and to make a final determination of the nature of the soils in order to close the CRBAWP as a solid waste disposal facility under Tennessee State rule 1200-1-7-.04. The objectives of this work are to summarize existing site information and detail actions necessary to sample and characterize soils from the waste pile as hazardous or nonhazardous per the Toxicity Characteristic Leaching Procedure (TCLP). Within the scope of this plan, a site investigation will be discussed; a field sampling plan will be described in terms of sampling locations, procedures, and quality assurance; and ancillary activities such as waste management, data management, and health and safety will be outlines. 15 refs., 7 figs., 2 tabs.

  3. Surface energy and work function of the light actinides

    DEFF Research Database (Denmark)

    Kollár, J.; Vitos, Levente; Skriver, Hans Lomholt

    1994-01-01

    We have calculated the surface energy and work function of the light actinides Fr, Ra, Ac, Th, Pa, U, Np, and Pu by means of a Green's-function technique based on the linear-muffin-tin-orbitals method within the tight-binding representation. In these calculations we apply an energy functional which...

  4. Thermionic scanner pinpoints work function of emitter surfaces

    Science.gov (United States)

    Rasor, N. S.

    1966-01-01

    In the electron tube testing, a thermionic scanner makes accurate spatial resolution measurements of the metallic surface work functions of emitters. The scanner determines the emitter function and its local departures from the mean value on a point-by-point basis for display on an oscilloscope.

  5. High surface area carbon and process for its production

    Energy Technology Data Exchange (ETDEWEB)

    Romanos, Jimmy; Burress, Jacob; Pfeifer, Peter; Rash, Tyler; Shah, Parag; Suppes, Galen

    2016-12-13

    Activated carbon materials and methods of producing and using activated carbon materials are provided. In particular, biomass-derived activated carbon materials and processes of producing the activated carbon materials with prespecified surface areas and pore size distributions are provided. Activated carbon materials with preselected high specific surface areas, porosities, sub-nm (<1 nm) pore volumes, and supra-nm (1-5 nm) pore volumes may be achieved by controlling the degree of carbon consumption and metallic potassium intercalation into the carbon lattice during the activation process.

  6. Influence of surface morphology and surface area on release behavior of hydrogen isotopes in LiNbO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Deqiong, E-mail: zhudeqiong@snu.ac.kr [Department of Nuclear Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 151-744 (Korea, Republic of); Oda, Takuji [Department of Nuclear Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 151-744 (Korea, Republic of); Tanaka, Satoru [Department of Nuclear Engineering and Management, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 Japan (Japan)

    2014-11-15

    Surface processes have profound influence on tritium release behavior in ceramic breeder materials. In this paper, the release behavior of hydrogen isotopes in LiNbO{sub 3} is studied by thermal desorption spectroscopy (TDS) with focusing on the influence of the surface morphology and surface area. It is found that the amount of surface hydroxyl groups is proportional to the specific surface area and can be decreased by smoothing the surface roughness through heating pretreatment at high temperatures. The isotope exchange reaction between the surface hydroxyl groups and water molecules residue in the system is discussed and turns out to proceed fast. The release behavior of hydrogen isotopes in LiNbO{sub 3} is compared with that in Li{sub 2}TiO{sub 3} studied in our previous work. It reveals that LiNbO{sub 3} and Li{sub 2}TiO{sub 3} have similar surface environment and similar concentration of surface hydroxyl groups with the level of 10{sup 20} m{sup −2}. The formation mechanism of hydroxyl groups on the surface is discussed and a model to explain the experimental observations is proposed.

  7. Clay mineralogy in different geomorphic surfaces in sugarcane areas

    Science.gov (United States)

    Camargo, L.; Marques, J., Jr.

    2012-04-01

    The crystallization of the oxides and hydroxides of iron and aluminum and kaolinite of clay fraction is the result of pedogenetic processes controlled by the relief. These minerals have influence on the physical and chemical attributes of soil and exhibit spatial dependence. The pattern of spatial distribution is influenced by forms of relief as the geomorphic surfaces. In this sense, the studies aimed at understanding the relationship between relief and the distribution pattern of the clay fraction attributes contribute to the delineation of specific areas of management in the field. The objective of this study was to evaluate the spatial distribution of oxides and hydroxides of iron and aluminum and kaolinite of clay fraction and its relationship with the physical and chemical attributes in different geomorphic surfaces. Soil samples were collected in a transect each 25 m (100 samples) and in the sides of the same (200 samples) as well as an area of 500 ha (1 sample each six hectare). Geomorphic surfaces (GS) in the transect were mapped in detail to support mapping the entire area. The soil samples were taken to the laboratory for chemical, physical, and mineralogical analysis, and the pattern of spatial distribution of soil attributes was obtained by statistics and geostatistics. The GS I is considered the oldest surface of the study area, with depositional character, and a slope ranging from 0 to 4%. GS II and III are considered to be eroded, and the surface II plan a gentle slope that extends from the edge of the surface until the beginning of I and III. The crystallographic characteristics of the oxides and hydroxides of iron and aluminum and kaolinite showed spatial dependence and the distribution pattern corresponding to the limits present of the GS in the field. Surfaces I and II showed the best environments to the degree of crystallinity of hematite and the surface III to the greatest degree of crystallinity of goethite agreeing to the pedoenvironment

  8. Work function modifications of graphite surface via oxygen plasma treatment

    Science.gov (United States)

    Duch, J.; Kubisiak, P.; Adolfsson, K. H.; Hakkarainen, M.; Golda-Cepa, M.; Kotarba, A.

    2017-10-01

    The surface modification of graphite by oxygen plasma was investigated experimentally (X-ray diffraction, nanoparticle tracking analysis, laser desorption ionization mass spectrometry, thermogravimetry, water contact angle) and by molecular modelling (Density Functional Theory). Generation of surface functional groups (mainly sbnd OHsurf) leads to substantial changes in electrodonor properties and wettability gauged by work function and water contact angle, respectively. The invoked modifications were analyzed in terms of Helmholtz model taking into account the theoretically determined surface dipole moment of graphite-OHsurf system (μ = 2.71 D) and experimentally measured work function increase (from 0.75 to 1.02 eV) to determine the sbnd OH surface coverage (from 0.70 to 1.03 × 1014 groups cm-2). Since the plasma treatment was confined to the surface, the high thermal stability of the graphite material was preserved as revealed by the thermogravimetric analysis. The obtained results provide a suitable quantitative background for tuning the key operating parameters of carbon electrodes: electronic properties, interaction with water and thermal stability.

  9. Stereological estimation of surface area from digital images

    DEFF Research Database (Denmark)

    Ziegel, Johanna; Kiderlen, Markus

    2010-01-01

    A sampling design of local stereology is combined with a method from digital stereology to yield a novel estimator of surface area based on counts of configurations observed in a digitization of an isotropic 2- dimensional slice with thickness s. As a tool, a result of the second author and J. Ra....... For general shapes bounds for the asymptotic expected relative worst case error are given. A simulation example is discussed for surface area estimation based on 2×2×2-configurations.......A sampling design of local stereology is combined with a method from digital stereology to yield a novel estimator of surface area based on counts of configurations observed in a digitization of an isotropic 2- dimensional slice with thickness s. As a tool, a result of the second author and J....... Rataj on infinitesimal increase of volumes of morphological transforms is refined and used. The proposed surface area estimator is asymptotically unbiased in the case of sets contained in the ball centred at the origin with radius s and in the case of balls centred at the origin with unknown radius...

  10. Evaluation of Five Formulae for Estimating Body Surface Area of ...

    African Journals Online (AJOL)

    in pediatric practice and child health is body surface area (BSA) ... Conclusion: Formulae by Boyd and Mosteller are the best BSA estimate for. Nigerian .... weight: (21.5 [7.6] kg vs. 20.8 [6.7] .... formula best fits with the “gold standard.” However ...

  11. Characterization of large area nanostructured surfaces using AFM measurements

    DEFF Research Database (Denmark)

    Calaon, Matteo; Hansen, Hans Nørgaard; Tosello, Guido;

    2012-01-01

    magnitude of the 3D surface amplitude parameters chosen for the analysis, when increasing the Al purity from 99,5% to 99,999%. AFM was then employed to evaluate the periodical arrangements of the nano structured cells. Image processing was used to estimate the average areas value, the height variation...

  12. Estimation of Specific Surface Area using Langmuir Isotherm ...

    African Journals Online (AJOL)

    Michael Horsfall

    13.884) units in multiple of 10-3km2kg-1. The reliability of the ... In this present study, the linear least- squares method via the correlation coefficient (R2) was used (Yuh,2006). ... specific surface area determination has been adopted widely for ...

  13. Restoration of eroded surfaces in Serbian ski-areas

    Directory of Open Access Journals (Sweden)

    Ristić Ratko

    2009-01-01

    Full Text Available The environmental impacts in Serbian ski areas are very strong, leading to landscape degradation and functionality losses. Construction or improvement works cause serious destruction of topsoil and native vegetation. Some activities enhance erosion production and sediment yield: clear cuttings; trunk transport down the slope; road construction and large excavations. Also, lack of erosion control works in ski areas, especially between April and October, result in various forms of land degradation such as furrows, gullies, landslides, or debris from rock weathering. The consequences of mismanagement in ski areas are noticeable in downstream sections of river beds, causing floods and bed-load deposition. Planning and designing activities, with the application of technical and biotechnical erosion control structures, through the concept of restoration, are necessary measures in the protection of ski areas.

  14. Effect of milling temperatures on surface area, surface energy and cohesion of pharmaceutical powders.

    Science.gov (United States)

    Shah, Umang V; Wang, Zihua; Olusanmi, Dolapo; Narang, Ajit S; Hussain, Munir A; Tobyn, Michael J; Heng, Jerry Y Y

    2015-11-10

    Particle bulk and surface properties are influenced by the powder processing routes. This study demonstrates the effect of milling temperatures on the particle surface properties, particularly surface energy and surface area, and ultimately on powder cohesion. An active pharmaceutical ingredient (API) of industrial relevance (brivanib alaninate, BA) was used to demonstrate the effect of two different, but most commonly used milling temperatures (cryogenic vs. ambient). The surface energy of powders milled at both cryogenic and room temperatures increased with increasing milling cycles. The increase in surface energy could be related to the generation of surface amorphous regions. Cohesion for both cryogenic and room temperature milled powders was measured and found to increase with increasing milling cycles. For cryogenic milling, BA had a surface area ∼ 5× higher than the one obtained at room temperature. This was due to the brittle nature of this compound at cryogenic temperature. By decoupling average contributions of surface area and surface energy on cohesion by salinization post-milling, the average contribution of surface energy on cohesion for powders milled at room temperature was 83% and 55% at cryogenic temperature.

  15. Surface Energy and Work Function Control of AlOx/Al Surfaces by Fluorinated Benzylphosphonic Acids.

    Science.gov (United States)

    Abraham, Ffion; Ford, William E; Scholz, Frank; Nelles, Gabriele; Sandford, Graham; von Wrochem, Florian

    2016-05-11

    The performance of organic electronic devices can be significantly improved by modifying metal electrodes with organic monolayers, which alter the physical and chemical nature of the interface between conductor and semiconductor. In this paper we examine a series of 12 phosphonic acid compounds deposited on the native oxide layer of aluminum (AlOx/Al), an electrode material with widespread applications in organic electronics. This series includes dodecylphosphonic acid as a reference and 11 benzylphosphonic acids, seven of which are fluorinated, including five newly synthesized derivatives. The monolayers are experimentally characterized by contact angle goniometry and by X-ray photoemission spectroscopy (XPS), and work function data obtained by low-intensity XPS are correlated with molecular dipoles obtained from DFT calculations. We find that monolayers are formed with molecular areas ranging from 17.7 to 42.9 Å(2)/molecule, and, by the choice of appropriate terminal groups, the surface energy can be tuned from 23.5 mJ/m(2) to 70.5 mJ/m(2). Depending on the number and position of fluorine substituents on the aromatic rings, a variation in the work function of AlOx/Al substrates over a range of 0.91 eV is achieved, and a renormalization procedure based on molecular density yields a surprising agreement of work function changes with interface dipoles as expected from Helmholtz' equation. The ability to adjust energetics and adhesion at organic semiconductor/AlOx interfaces has immediate applications in devices such as OLEDs, OTFTs, organic solar cells, and printed organic circuits.

  16. Work of adhesion of dairy products on stainless steel surface

    Directory of Open Access Journals (Sweden)

    Patrícia Campos Bernardes

    2012-12-01

    Full Text Available The adhesion of the solids presents in food can difficult the process of surface cleaning and promotes the bacterial adhesion process and can trigger health problems. In our study, we used UHT whole milk, chocolate based milk and infant formula to evaluate the adhesion of Enterobacter sakazakii on stainless steel coupons, and we determine the work of adhesion by measuring the contact angle as well as measured the interfacial tension of the samples. Inaddition we evaluated the hydrophobicity of stainless steel after pre-conditioning with milk samples mentioned. E. sakazakii was able to adhere to stainless steel in large numbers in the presence of dairy products. The chocolate based milk obtained the lower contact angle with stainless steel surface, higher interfacial tension and consequently higher adhesion work. It was verified a tendency of decreasing the interfacial tension as a function of the increasing of protein content. The pre-conditioning of the stainless steel coupons with milk samples changed the hydrophobic characteristics of the surfaces and became them hydrophilic. Therefore, variations in the composition of the milk products affect parameters important that can influence the procedure of hygiene in surface used in food industry.

  17. Models of bedrock surface and overburden thickness over Olkiluoto island and nearby sea area

    Energy Technology Data Exchange (ETDEWEB)

    Moenkkoenen, H. [WSP Finland Oy, Helsinki (Finland)

    2012-04-15

    In this report, a model of bedrock surface and a model of overburden thickness over the Olkiluoto Island and the nearby sea area are presented. Also in purpose to produce material for biosphere and radionuclide transport modelling, stratigraphy models of different sediment layers were created at two priority areas north and south of the Olkiluoto Island. The work concentrated on the collection and description of available data of bedrock surface and overburden thickness. Because the information on the bedrock surface and overburden is collected from different sources and is based on a number of types of data the quality and applicability of data sets varies. Consequently also the reliability in different parts of the models varies. Input data for the bedrock surface and overburden thickness models include 2928 single points and additional outcrops observations (611 polygons) in the modelled area. In addition, the input data include 173 seismic refraction lines (6534 points) and acousticseismic sounding lines (26655 points from which 13721 points are located in model area) in the Olkiluoto offshore area. The average elevation of bedrock surface in area is 2.1 metres above the sea level. The average thickness of overburden is 2.5 metres varying typically between 2 - 4 metres. Thickest overburden covers (approximately 16 metres) of terrestrial area are located at the western end of the Olkiluoto Island and in sea basin south of the island. (orig.)

  18. Error bounds for surface area estimators based on Crofton's formula

    DEFF Research Database (Denmark)

    Kiderlen, Markus; Meschenmoser, Daniel

    2009-01-01

    and the mean is approximated by a finite weighted sum S(A) of the total projections in these directions. The choice of the weights depends on the selected quadrature rule. We define an associated zonotope Z (depending only on the projection directions and the quadrature rule), and show that the relative error...... in the sense that the relative error of the surface area estimator is very close to the minimal error.......According to Crofton’s formula, the surface area S(A) of a sufficiently regular compact set A in R^d is proportional to the mean of all total projections pA (u) on a linear hyperplane with normal u, uniformly averaged over all unit vectors u. In applications, pA (u) is only measured in k directions...

  19. Tokamak dust particle size and surface area measurement

    Energy Technology Data Exchange (ETDEWEB)

    Carmack, W.J.; Smolik, G.R.; Anderl, R.A.; Pawelko, R.J.; Hembree, P.B.

    1998-07-01

    The INEEL has analyzed a variety of dust samples from experimental tokamaks: General Atomics` DII-D, Massachusetts Institute of Technology`s Alcator CMOD, and Princeton`s TFTR. These dust samples were collected and analyzed because of the importance of dust to safety. The dust may contain tritium, be activated, be chemically toxic, and chemically reactive. The INEEL has carried out numerous characterization procedures on the samples yielding information useful both to tokamak designers and to safety researchers. Two different methods were used for particle characterization: optical microscopy (count based) and laser based volumetric diffraction (mass based). Surface area of the dust samples was measured using Brunauer, Emmett, and Teller, BET, a gas adsorption technique. The purpose of this paper is to present the correlation between the particle size measurements and the surface area measurements for tokamak dust.

  20. Human epididymis: structural pattern, total length and inner surface area.

    Science.gov (United States)

    Skandhan, Kalanghot P; Soni, Ashutosh; Joshi, Anantkumar; Avni, Kalanghot P S; Gupta, Bansi Dhar

    2017-05-24

    The organ epididymis is secured the name considering it functioned as an appendix to the testis; earlier testis was called as didymi. Regarding the length of human epididymis, several values are attributed by different authors. The present study was aimed to find out the pattern, total length and inner surface area of human epididymis. The study was conducted by employing microsurgical procedures on five testes from unclaimed human dead bodies. Caput was formed by few tubes interconnecting at three levels. These tubes led to corpus, which in turn was having more number of tubes interconnecting at different levels. Tubules were many looking like a mesh. United tubes of corpus form the single tube to form cauda. Epididymis length was 30.48 cm. Inner surface area was 818.16 mm2. Reported values of others seem to be a modified version from that of animals. Authors believe that organic revolutionary changes in man led to a reduction in the length of epididymis.

  1. Particle surface area and bacterial activity in recirculating aquaculture systems

    DEFF Research Database (Denmark)

    Pedersen, Per Bovbjerg; von Ahnen, Mathis; Fernandes, Paulo

    2017-01-01

    Suspended particles in recirculating aquaculture systems (RAS) provide surface area that can be colonized by bacteria. More particles accumulate as the intensity of recirculation increases thus potentially increasing the bacterial carrying capacity of the systems. Applying a recent, rapid, culture......-independent fluorometric detection method (Bactiquant®) for measuring bacterial activity, the current study explored the relationship between total particle surface area (TSA, derived from the size distribution of particles >5 μm) and bacterial activity in freshwater RAS operated at increasing intensity of recirculation......-up water; corresponding to 0.32 m3 make-up water kg−1 feed). This was likely due to the accumulation of dissolved nutrients sustaining free-living bacterial populations, and/or accumulation of suspended colloids and fine particles less than 5 μm in diameter, which were not characterized in the study...

  2. DETERMINATION OF GLACIER SURFACE AREA USING SPACEBORNE SAR IMAGERY

    OpenAIRE

    Fang, L.; Maksymiuk, O.; Schmitt, M.; Stilla, U.

    2013-01-01

    Glaciers are very important climate indicators. Although visible remote sensing techniques can be used to extract glacier variations effectively and accurately, the necessary data are depending on good weather conditions. In this paper, a method for determination of glacier surface area using multi-temporal and multi-angle high resolution TerraSAR-X data sets is presented. We reduce the "data holes" in the SAR scenes affected by radar shadowing and specular backscattering of smooth i...

  3. Determination of hand and palm area as a ratio of body surface area in Indian population

    Directory of Open Access Journals (Sweden)

    Agarwal Pawan

    2010-01-01

    Full Text Available Background: Accurate estimation of body surface area (BSA burn is important. In small and patchy burns, the patient′s hand is used to estimate percentage of burn which is traditionally considered as 1%. There is discrepancy about what percentage of TBSA is constituted by the palm and hand. Therefore, this study was designed to determine correctly the TBSA represented by the palmar surface of the entire hand and palm in the Indian population. Material and Methods: 300 healthy adult (male and female and 300 healthy children (male and female were included in the study. TBSA was calculated using DuBois formula and hand and palm surface area was calculated using hand tracing on plain paper. The hand/palm percentage of BSA (ratio was determined by dividing hand/palm surface area by total BSA. Results: The mean hand and palm ratio for adults was 0.92% and 0.50%, respectively. The mean hand and palm ratio in children was 1.06% and 0.632%, respectively. Conclusion: The hand area (palm plus digits is more closely represented to 1% of TBSA in Indian population.

  4. Ultralow effective work function surfaces using diamondoid monolayers.

    Science.gov (United States)

    Narasimha, Karthik Thimmavajjula; Ge, Chenhao; Fabbri, Jason D; Clay, William; Tkachenko, Boryslav A; Fokin, Andrey A; Schreiner, Peter R; Dahl, Jeremy E; Carlson, Robert M K; Shen, Z X; Melosh, Nicholas A

    2016-03-01

    Electron emission is critical for a host of modern fabrication and analysis applications including mass spectrometry, electron imaging and nanopatterning. Here, we report that monolayers of diamondoids effectively confer dramatically enhanced field emission properties to metal surfaces. We attribute the improved emission to a significant reduction of the work function rather than a geometric enhancement. This effect depends on the particular diamondoid isomer, with [121]tetramantane-2-thiol reducing gold's work function from ∼ 5.1 eV to 1.60 ± 0.3 eV, corresponding to an increase in current by a factor of over 13,000. This reduction in work function is the largest reported for any organic species and also the largest for any air-stable compound. This effect was not observed for sp(3)-hybridized alkanes, nor for smaller diamondoid molecules. The magnitude of the enhancement, molecule specificity and elimination of gold metal rearrangement precludes geometric factors as the dominant contribution. Instead, we attribute this effect to the stable radical cation of diamondoids. Our computed enhancement due to a positively charged radical cation was in agreement with the measured work functions to within ± 0.3 eV, suggesting a new paradigm for low-work-function coatings based on the design of nanoparticles with stable radical cations.

  5. Spectral theory of infinite-area hyperbolic surfaces

    CERN Document Server

    Borthwick, David

    2016-01-01

    This text introduces geometric spectral theory in the context of infinite-area Riemann surfaces, providing a comprehensive account of the most recent developments in the field. For the second edition the context has been extended to general surfaces with hyperbolic ends, which provides a natural setting for development of the spectral theory while still keeping technical difficulties to a minimum. All of the material from the first edition is included and updated, and new sections have been added. Topics covered include an introduction to the geometry of hyperbolic surfaces, analysis of the resolvent of the Laplacian, scattering theory, resonances and scattering poles, the Selberg zeta function, the Poisson formula, distribution of resonances, the inverse scattering problem, Patterson-Sullivan theory, and the dynamical approach to the zeta function. The new sections cover the latest developments in the field, including the spectral gap, resonance asymptotics near the critical line, and sharp geometric constan...

  6. Determination of Glacier Surface Area Using Spaceborne SAR Imagery

    Science.gov (United States)

    Fang, L.; Maksymiuk, O.; Schmitt, M.; Stilla, U.

    2013-04-01

    Glaciers are very important climate indicators. Although visible remote sensing techniques can be used to extract glacier variations effectively and accurately, the necessary data are depending on good weather conditions. In this paper, a method for determination of glacier surface area using multi-temporal and multi-angle high resolution TerraSAR-X data sets is presented. We reduce the "data holes" in the SAR scenes affected by radar shadowing and specular backscattering of smooth ice surfaces by combining the two complementary different imaging geometries (from ascending and descending satellite tracks). Then, a set of suitable features is derived from the intensity image, the texture information generated based on the gray level co-occurrence matrix (GLCM), glacier velocity estimated by speckle tracking, and the interferometric coherence map. Furthermore, the features are selected by 10-foldcross- validation based on the feature relevance importance on classification accuracy using a Random Forests (RF) classifier. With these most relevant features, the glacier surface is discriminated from the background by RF classification in order to calculate the corresponding surface area.

  7. Psychology Baccalaureates at Work: Major Area Subspecializations, Earnings, and Occupations

    Science.gov (United States)

    Rajecki, D. W.

    2012-01-01

    A Census Bureau national survey identified baccalaureates aged up to 64 years having major area subspecializations labeled "psychology," "industrial/organizational (I/O) psychology," and "counseling psychology." Median 2009 earnings of all such types of baccalaureate psychology alumni were well below the distribution mean of the 153 fields in the…

  8. Psychology Baccalaureates at Work: Major Area Subspecializations, Earnings, and Occupations

    Science.gov (United States)

    Rajecki, D. W.

    2012-01-01

    A Census Bureau national survey identified baccalaureates aged up to 64 years having major area subspecializations labeled "psychology," "industrial/organizational (I/O) psychology," and "counseling psychology." Median 2009 earnings of all such types of baccalaureate psychology alumni were well below the distribution mean of the 153 fields in the…

  9. Gaps to "Working" on the Surface of Small Bodies

    Science.gov (United States)

    Bellerose, J.

    2012-12-01

    Upcoming goals for human spaceflight include sending a crewed mission to a near-Earth asteroid (NEA) by 2025. As an alternative to this, a spacecraft could be sent to capture a small NEA, and return it to cislunar orbit where astronauts could take it apart (Brophy, 2012). In parallel, plans are also to take the next big step in resources utilization, and mine those NEAs (Lewicki, 2012). Although these exciting concepts are very different in scope, they share the same environment they will need to interact with. In this work, we discuss the required techniques for exploring and exploiting small bodies, and compare with the available tools and the current knowledge of small bodies. To support these types of missions, a number of in-situ data are required prior to start surface operations: the body shape and mass, the presence of volatiles and metals, the asteroid morphology, the internal structural properties, the surface and near-surface environments, the existence of hazards, and the time-evolution dynamics. Products obtained from remote sensing - maps, mosaics, shape models - are critical in selecting the locations to be investigated in more details, or the locations to be excavated. Composition measurements become especially important for mining, as it requires appropriate tools and techniques. Although spectrometers can be used in orbit and on the surface to determine elemental composition, the fine scale structure and mineralogical composition can only be done using surface probes or through a close-up camera. Those remote sensing images are also critical in planning the very close approaches by the spacecraft, as the small body environment is one of the most perturbed environments (Scheeres, 2000). Being able to recreate the small body dynamics is necessary to mitigate risks and to enable spacecraft docking. The navigation system, vision tools, and planning software become critical as the spacecraft will need to track features on the surface under different

  10. High surface area aerogels for energy storage and efficiency

    Science.gov (United States)

    Maloney, Ryan Patrick

    ADAI are demonstrated in a third-generation prototypical thermoelectric generator for automotive waste heat recovery. The second chapter then details two different aerogel-based materials for electrochemical energy storage. It begins with lithium titanate aerogel, which takes advantage of the high surface area of the aerogel morphology to display a batt-cap behavior. This should allow the lithium titanate aerogel to perform at higher rates than would normally be expected for the bulk oxide material. Additionally, the flexibility of the sol-gel process is demonstrated through the incorporation of electrically conductive high-surface area exfoliated graphite nanoplatelets in the oxide. The last section describes the characterization of a LiMn2O 4 spinel coated carbon nanofoam in a non-aqueous electrolyte. The short diffusion path, high surface area and intimately wired architecture of the nanofoam allows the oxide to retain its capacity at significantly higher rates when compared with literature values for the bulk oxide. Additionally, the nanometric length scale improves cycle life, and the high surface area dramatically increases the insertion capacity by providing a higher concentration of surface defects. Taken together, it is clear that aerogels are an extremely attractive class of material for applications pertaining to energy and efficiency, and further research in this area will provide valuable solutions for pressing societal needs. (Abstract shortened by UMI.).

  11. Basic problems and advances in the area of planning enterprises for working nonmetal mineral fields

    Energy Technology Data Exchange (ETDEWEB)

    Tudor, Gh.; Bucur, S.; Gavriliu, M.; Rusu, A.; Tamas, V.

    1980-01-01

    An examination is made of the problems and achievements in the area of planning enterprises for working fields of calcium, feldspar, kaolin, graphite, asbestos, rock salt, dolomite associated with the improvement in the economy of production, reduction in the consumption of energy and scarce materials. The developed program for improving the efficiency of production of nonmetal mineral stipulates an improvement in labor productivity, more efficient and more complete use of reserves, decrease in the volume of construction operations, improvement in the technology of extraction, increase in the degree of automation of processes, more skillful planning of the surface equipment for extraction and enrichment, reduction in the dimensions of designs of the units designed for enrichment and extraction, improvement in the efficient consumption of electricity with the help of a new system of power and distribution, reduction in consumption of fuel by the use of less expensive. A description is made of the different examples making it possible to achieve advances in these areas.

  12. Manganese Dioxide with High Specific Surface Area for Alkaline Battery

    Institute of Scientific and Technical Information of China (English)

    HUANG You-ju; LIN Yu-li; LI Wei-shan

    2012-01-01

    The authors reported a facile method for the synthesis of manganese dioxide without any template and catalyst at a low-temperature.The prepared sample was characterized with X-ray diffraction(XRD),scanning electron microscopy(SEM),Brunauer-Emmett-Teller(BET) surface analysis,Fourier transform infrared(FTIR) spectrometry,cyclic voltammetry,altemative current(AC) impedance test and battery discharge test.It is found that the prepared sample belongs to α-MnO2 and has a microsphere morphology and a large BET surface area.The electrochemical characterization indicates that the prepared sample displays a larger electrochemical capacitance than the commercial electrolytic manganese dioxides(EMD) in Na2SO4 solution,and exhibits larger discharge capacity than EMD,especially at a high rate discharge condition when it is used as cathode of alkaline Zn/MnO2 battery.

  13. Surface area-dependent second harmonic generation from silver nanorods.

    Science.gov (United States)

    Ngo, Hoang Minh; Luong, Thanh Tuyen; Ledoux-Rak, Isabelle

    2016-08-17

    The nonlinear optical (NLO) properties of metallic nanoparticles strongly depend on their size and shape. Metallic gold nanorods have already been widely investigated, but other noble metals could also be used for nanorod fabrication towards applications in photonics. Here we report on the synthesis and NLO characterization of silver nanorods (AgNRs) with controllable localized surface plasmon resonance. We have implemented an original, one-step and seedless synthesis method, based on a spontaneous particle growth technique in the presence of polyvinylpyrrolidone (PVP) as a capping agent. Colloidal solutions of AgNRs with various aspect ratios (5.0; 6.3; 7.5; 8.2 and 9.7) have been obtained and characterized using Harmonic light scattering (HLS) at 1064 nm, in order to investigate their quadratic NLO properties. From HLS experiments, we demonstrate that hyperpolarizability (β) values of AgNRs display a strong dependence on their surface area.

  14. Solids and Their Surfaces: Division B / Commission 14 / Working Group Solids and Their Surfaces

    CERN Document Server

    Vidali, Gianfranco; Henning, Thomas

    2015-01-01

    Just a decade ago, only a handful of laboratories were engaged in the preparation and characterization of cosmic dust analogues and in the study of the formation of molecules on their surfaces. Now more than three dozen laboratories work on such topics. This report summarizes new publications in this field.

  15. Metal-organic framework materials with ultrahigh surface areas

    Energy Technology Data Exchange (ETDEWEB)

    Farha, Omar K.; Hupp, Joseph T.; Wilmer, Christopher E.; Eryazici, Ibrahim; Snurr, Randall Q.; Gomez-Gualdron, Diego A.; Borah, Bhaskarjyoti

    2015-12-22

    A metal organic framework (MOF) material including a Brunauer-Emmett-Teller (BET) surface area greater than 7,010 m.sup.2/g. Also a metal organic framework (MOF) material including hexa-carboxylated linkers including alkyne bond. Also a metal organic framework (MOF) material including three types of cuboctahedron cages fused to provide continuous channels. Also a method of making a metal organic framework (MOF) material including saponifying hexaester precursors having alkyne bonds to form a plurality of hexa-carboxylated linkers including alkyne bonds and performing a solvothermal reaction with the plurality of hexa-carboxylated linkers and one or more metal containing compounds to form the MOF material.

  16. High surface area graphene-supported metal chalcogenide assembly

    Science.gov (United States)

    Worsley, Marcus A.; Kuntz, Joshua; Orme, Christine A.

    2016-04-19

    A composition comprising at least one graphene-supported assembly, which comprises a three-dimensional network of graphene sheets crosslinked by covalent carbon bonds, and at least one metal chalcogenide compound disposed on said graphene sheets, wherein the chalcogen of said metal chalcogenide compound is selected from S, Se and Te. Also disclosed are methods for making and using the graphene-supported assembly, including graphene-supported MoS.sub.2. Monoliths with high surface area and conductivity can be achieved. Lower operating temperatures in some applications can be achieved. Pore size and volume can be tuned.

  17. Asymptotic variance of grey-scale surface area estimators

    DEFF Research Database (Denmark)

    Svane, Anne Marie

    Grey-scale local algorithms have been suggested as a fast way of estimating surface area from grey-scale digital images. Their asymptotic mean has already been described. In this paper, the asymptotic behaviour of the variance is studied in isotropic and sufficiently smooth settings, resulting...... in a general asymptotic bound. For compact convex sets with nowhere vanishing Gaussian curvature, the asymptotics can be described more explicitly. As in the case of volume estimators, the variance is decomposed into a lattice sum and an oscillating term of at most the same magnitude....

  18. Indexing Glomerular Filtration Rate to Body Surface Area

    DEFF Research Database (Denmark)

    Redal-Baigorri, Belén; Rasmussen, Knud; Heaf, James Goya

    2014-01-01

    BACKGROUND: Kidney function is mostly expressed in terms of glomerular filtration rate (GFR). A common feature is the expression as ml/min per 1.73 m(2) , which represents the adjustment of the individual kidney function to a standard body surface area (BSA) to allow comparison between individuals....... We investigated the impact of indexing GFR to BSA in cancer patients, as this BSA indexation might affect the reported individual kidney function. METHODS: Cross-sectional study of 895 adults who had their kidney function measured with (51) chrome ethylene diamine tetraacetic acid. Mean values of BSA...

  19. High surface area graphene foams by chemical vapor deposition

    Science.gov (United States)

    Drieschner, Simon; Weber, Michael; Wohlketzetter, Jörg; Vieten, Josua; Makrygiannis, Evangelos; Blaschke, Benno M.; Morandi, Vittorio; Colombo, Luigi; Bonaccorso, Francesco; Garrido, Jose A.

    2016-12-01

    Three-dimensional (3D) graphene-based structures combine the unique physical properties of graphene with the opportunity to get high electrochemically available surface area per unit of geometric surface area. Several preparation techniques have been reported to fabricate 3D graphene-based macroscopic structures for energy storage applications such as supercapacitors. Although reaserch has been focused so far on achieving either high specific capacitance or high volumetric capacitance, much less attention has been dedicated to obtain high specific and high volumetric capacitance simultaneously. Here, we present a facile technique to fabricate graphene foams (GF) of high crystal quality with tunable pore size grown by chemical vapor deposition. We exploited porous sacrificial templates prepared by sintering nickel and copper metal powders. Tuning the particle size of the metal powders and the growth temperature allow fine control of the resulting pore size of the 3D graphene-based structures smaller than 1 μm. The as-produced 3D graphene structures provide a high volumetric electric double layer capacitance (165 mF cm-3). High specific capacitance (100 Fg-1) is obtained by lowering the number of layers down to single layer graphene. Furthermore, the small pore size increases the stability of these GFs in contrast to the ones that have been grown so far on commercial metal foams. Electrodes based on the as-prepared GFs can be a boost for the development of supercapacitors, where both low volume and mass are required.

  20. Primary care teams work harder in deprived areas.

    Science.gov (United States)

    Carlisle, R; Avery, A J; Marsh, P

    2002-03-01

    The NHS Plan promises an equitable distribution of resources within primary care. To inform the debate on the extent to which resources should be redistributed we examined the association between primary care activity and deprivation. We used the natural experiment of the organization of primary care in Mansfield, Nottinghamshire, where town centre general practices have patients from electoral wards with a range of socio-economic characteristics who are subject to the same degree of supplier-induced demand and variations in data quality. We used one year's prospective data for two practices with 20,106 patients from 15 electoral wards. We performed linear regression analysis of directly age-standardized rates for different types of primary care activity and primary care morbidity-specific contacts against Townsend and Index of Multiple Deprivation 2000 scores. There were 44 per cent more out-of-hours contacts in more deprived areas (95 per cent confidence interval (CI) 17-70 per cent), 18 per cent more surgery consultations (95 per cent CI 8-27 per cent), and 28 per cent more same-day consultations (95 per cent CI 12-44 per cent). Routine visits by doctors and contacts by district and practice nurses did not have substantial associations with deprivation. Morbidity-specific contacts for psychological problems and respiratory problems were associated with deprivation but there was no significant association for contacts for low back pain, asthma or menopausal problems. Different types of primary care activity and contacts for different morbidities had different associations with deprivation. This makes it difficult to recommend a simple list size adjustment; however, increased activity in deprived wards needs to be recognized in resource allocation, service configuration and performance management in primary care.

  1. Investigation of Sea Surface Temperature (SST) anomalies over Cyprus area

    Science.gov (United States)

    Georgiou, Andreas; Akçit, Nuhcan

    2016-08-01

    The temperature of the sea surface has been identified as an important parameter of the natural environment, governing processes that occur in the upper ocean. This paper focuses on the analysis of the Sea Surface Temperature (SST) anomalies at the greater area of Cyprus. For that, SST data derived from MODerate-resolution Imaging Spectroradiometer (MODIS) instrument on board both Aqua and Terra sun synchronous satellites were used. A four year period was chosen as a first approach to address and describe this phenomenon. Geographical Information Systems (GIS) has been used as an integrated platform of analysis and presentation in addition of the support of MATLAB®. The methodology consists of five steps: (i) Collection of MODIS SST imagery, (ii) Development of the digital geo-database; (iii) Model and run the methodology in GIS as a script; (iv) Calculation of SST anomalies; and (v) Visualization of the results. The SST anomaly values have presented a symmetric distribution over the study area with an increase trend through the years of analysis. The calculated monthly and annual average SST anomalies (ASST) make more obvious this trend, with negative and positive SST changes to be distributed over the study area. In terms of seasons, the same increase trend presented during spring, summer, autumn and winter with 2013 to be the year with maximum ASST observed values. Innovative aspects comprise of straightforward integration and modeling of available tools, providing a versatile platform of analysis and semi-automation of the operation. In addition, the fine resolution maps that extracted from the analysis with a wide spatial coverage, allows the detail representation of SST and ASST respectively in the region.

  2. Lung deposited surface area concentrations in a street canyon

    Science.gov (United States)

    Kuuluvainen, Heino; Hietikko, Riina; Järvinen, Anssi; Saukko, Erkka; Irjala, Matti; Niemi, Jarkko V.; Timonen, Hilkka; Keskinen, Jorma; Rönkkö, Topi

    2017-04-01

    Street canyons are interesting environments with respect to the dispersion of traffic emissions and human exposure. Pedestrians may be exposed to relatively high concentrations of fine particles and the vertical dispersion affects the human exposure above the ground level in buildings. Previously, particle concentrations have been measured in street canyons at a few different heights (Marini et al., 2015). The information on the lung deposited surface area (LDSA) concentration, which is a relevant metric for the negative health effects, is very limited even at the ground level of street canyons (Kuuluvainen et al., 2016). More information especially on the vertical dispersion and the ground level concentrations is needed, for instance, for the use of urban planning and the design of ventilation systems in buildings. Measurements were carried out in a busy street canyon in Helsinki, Finland, at an urban super-site measurement station (Mäkelänkatu 50). The data included vertical concentration profiles measured in an intensive measurement campaign with a Partector (Naneos GmbH) installed into a drone, long-term measurements with an AQ Urban particle sensor (Pegasor Ltd.), and an extensive comparison measurement in the field with different devices measuring the LDSA. These devices were an AQ Urban, Partector, DiSCmini (Testo AG), NSAM (TSI Inc.), and an ELPI+ (Dekati Ltd.). In addition, continuous measurements of gas phase components, particle size distributions, and meteorology were run at the supersite. The vertical profile measurements were con-ducted in November 2016 during two days. In the measurements, the drone was flown from the ground level to an altitude of 50 or 100 m, which is clearly above the roof level of the buildings. Altogether, 48 up-and-down flights were conducted during the two days. The vertical profiles were supported by continuous measurements at the ground level on both sides of the street canyon. The long-term measurements were conducted

  3. Slippery versus slip resistant work surfaces: The background for a regulatory definition

    Science.gov (United States)

    Miller, J. M.

    1983-02-01

    There has been over fifty years of scattered research into the areas of walking/working surface slipperiness and coefficient of friction (COF) measurement. In spite of this research, numerous standards address slip/fail type accidents only in terms of requiring surfaces to be qualitatively useful in providing guidelines for establishing quantitative criteria for "slippery' vs. "slip resistant' combinations of surface, shoe, task, and contaminant conditions. Recommendations applicable to standards making organizations are made. Among them are: (1) changing legally inappropriate descriptor terms such as "nonslip' to "slip resistant'; and (2) defining "slippery' vs. "slip resistant' in terms of quantitative COF values (i.e., for persons walking unloaded on level surfaces a COF of 0.5 would be a reasonable standard).

  4. The impact of built-up surfaces on land surface temperatures in Italian urban areas.

    Science.gov (United States)

    Morabito, Marco; Crisci, Alfonso; Messeri, Alessandro; Orlandini, Simone; Raschi, Antonio; Maracchi, Giampiero; Munafò, Michele

    2016-05-01

    Urban areas are characterized by the very high degree of soil sealing and continuous built-up areas: Italy is one of the European countries with the highest artificial land cover rate, which causes a substantial spatial variation in the land surface temperature (LST), modifying the urban microclimate and contributing to the urban heat island effect. Nevertheless, quantitative data regarding the contribution of different densities of built-up surfaces in determining urban spatial LST changes is currently lacking in Italy. This study, which aimed to provide clear and quantitative city-specific information on annual and seasonal spatial LST modifications resulting from increased urban built-up coverage, was conducted generally throughout the whole year, and specifically in two different periods (cool/cold and warm/hot periods). Four cities (Milan, Rome, Bologna and Florence) were included in the study. The LST layer and the built-up-surface indicator were obtained via use of MODIS remote sensing data products (1km) and a very high-resolution map (5m) of built-up surfaces recently developed by the Italian National Institute for Environmental Protection and Research. The relationships between the dependent (mean daily, daytime and nighttime LST values) and independent (built-up surfaces) variables were investigated through linear regression analyses, and comprehensive built-up-surface-related LST maps were also developed. Statistically significant linear relationships (pcities studied, with a higher impact during the warm/hot period than in the cool/cold ones. Daytime and nighttime LST slope patterns depend on the city size and relative urban morphology. If implemented in the existing city plan, the urban maps of built-up-surface-related LST developed in this study might be able to support more sustainable urban land management practices by identifying the critical areas (Hot-Spots) that would benefit most from mitigation actions by local authorities, land-use decision

  5. The natural history of the growth of the hand: I. Hand area as a percentage of body surface area.

    Science.gov (United States)

    Amirsheybani, H R; Crecelius, G M; Timothy, N H; Pfeiffer, M; Saggers, G C; Manders, E K

    2001-03-01

    The use of a patient's own hand as a tool to estimate the area of burn injury is well documented. The area of the palmar surface of one hand has been estimated to be 1 percent of the body surface area. The area of the palmar surface of the hand was measured to test the accuracy of this estimate and then compared with the body surface area as calculated by formulas in common use. This study also sought to determine the natural history of the growth of the hand to permit development of a readily available, bedside means of estimating hand area and body surface area. Bilateral hand tracings were obtained from 800 volunteers ranging in age from 2 to 89 years. The area of each tracing was determined using an integrating planimeter. The height and weight of each individual were measured, and his/her body surface area was calculated. The palmar hand's percentage of body surface area was determined by calculating the quotient for hand area divided by body surface area. Additionally, the width of the hand was measured from the ulnar aspect at the palmar digital crease of the small finger to the point where the thumb rested against the base of the index finger. The length of the hand was measured from the middle of the interstylon to the tip of the middle finger. These two figures were multiplied together to obtain a product which approximated the area of the hand. Based on the most commonly used DuBois formula for calculating body surface area, the area of palmar surface of the hand corresponds to 0.78 +/- 0.08 percent of the body surface area in adults. The percentage varies somewhat with age and reaches a maximum of 0.87 +/- 0.06 percent in young children. Multiplying the length of the hand by its width overestimates the area of the hand as determined by planimetry by only 2 percent. A patient's own hand may be used as a complementary, readily available template for estimation of burn area or other areas of disease or injury. In adults, the area of tracing of the outline

  6. Comparison of deposited surface area of airborne ultrafine particles generated from two welding processes.

    Science.gov (United States)

    Gomes, J F; Albuquerque, P C; Miranda, Rosa M; Santos, Telmo G; Vieira, M T

    2012-09-01

    This article describes work performed on the assessment of the levels of airborne ultrafine particles emitted in two welding processes metal-active gas (MAG) of carbon steel and friction-stir welding (FSW) of aluminium in terms of deposited area in alveolar tract of the lung using a nanoparticle surface area monitor analyser. The obtained results showed the dependence from process parameters on emitted ultrafine particles and clearly demonstrated the presence of ultrafine particles, when compared with background levels. The obtained results showed that the process that results on the lower levels of alveolar-deposited surface area is FSW, unlike MAG. Nevertheless, all the tested processes resulted in important doses of ultrafine particles that are to be deposited in the human lung of exposed workers.

  7. Method for producing high surface area chromia materials for catalysis

    Science.gov (United States)

    Gash, Alexander E.; Satcher, Joe; Tillotson, Thomas; Hrubesh, Lawrence; Simpson, Randall

    2007-05-01

    Nanostructured chromium(III)-oxide-based materials using sol-gel processing and a synthetic route for producing such materials are disclosed herein. Monolithic aerogels and xerogels having surface areas between 150 m.sup.2/g and 520 m.sup.2/g have been produced. The synthetic method employs the use of stable and inexpensive hydrated-chromium(III) inorganic salts and common solvents such as water, ethanol, methanol, 1-propanol, t-butanol, 2-ethoxy ethanol, and ethylene glycol, DMSO, and dimethyl formamide. The synthesis involves the dissolution of the metal salt in a solvent followed by an addition of a proton scavenger, such as an epoxide, which induces gel formation in a timely manner. Both critical point (supercritical extraction) and atmospheric (low temperature evaporation) drying may be employed to produce monolithic aerogels and xerogels, respectively.

  8. Fully automated algorithm for wound surface area assessment.

    Science.gov (United States)

    Deana, Alessandro Melo; de Jesus, Sérgio Henrique Costa; Sampaio, Brunna Pileggi Azevedo; Oliveira, Marcelo Tavares; Silva, Daniela Fátima Teixeira; França, Cristiane Miranda

    2013-01-01

    Worldwide, clinicians, dentists, nurses, researchers, and other health professionals need to monitor the wound healing progress and to quantify the rate of wound closure. The aim of this study is to demonstrate, step by step, a fully automated numerical method to estimate the size of the wound and the percentage damaged relative to the body surface area (BSA) in images, without the requirement for human intervention. We included the formula for BSA in rats in the algorithm. The methodology was validated in experimental wounds and human ulcers and was compared with the analysis of an experienced pathologist, with good agreement. Therefore, this algorithm is suitable for experimental wounds and burns and human ulcers, as they have a high contrast with adjacent normal skin.

  9. High surface area ThO/sub 2/ catalyst

    Science.gov (United States)

    Colmenares, C.A.; Somorjai, G.A.; Maj, J.J.

    1983-06-21

    A ThO/sub 2/ catalyst having a high surface area of about 80 to 125m/sup 2//g is synthesized. The compound is synthesized by simultaneously mixing an aqueous solution of ThNO/sub 3/(NO/sub 3/)/sub 4/.4H/sub 2/O with an aqueous solution of Na/sub 2/CO/sub 3/.H/sub 2/O, to produce a solution and solid ThOCO/sub 3/. The solid ThOCO/sub 3/ is separated from the solution, and then calcined at a temperature of about 225 to 300/sup 0/C for about 40 to 55 hours to produce ThO/sub 2/. The ThO/sub 2/ catalyst produced includes Na present as a substitutional cation in an amount equal to about 5 to 10 at. %.

  10. Estimating the surface area of birds: using the homing pigeon (Columba livia as a model

    Directory of Open Access Journals (Sweden)

    Cristina R. Perez

    2014-05-01

    Full Text Available Estimation of the surface area of the avian body is valuable for thermoregulation and metabolism studies as well as for assessing exposure to oil and other surface-active organic pollutants from a spill. The use of frozen carcasses for surface area estimations prevents the ability to modify the posture of the bird. The surface area of six live homing pigeons in the fully extended flight position was estimated using a noninvasive method. An equation was derived to estimate the total surface area of a pigeon based on its body weight. A pigeon's surface area in the fully extended flight position is approximately 4 times larger than the surface area of a pigeon in the perching position. The surface area of a bird is dependent on its physical position, and, therefore, the fully extended flight position exhibits the maximum area of a bird and should be considered the true surface area of a bird.

  11. Estimating the surface area of birds: using the homing pigeon (Columba livia) as a model.

    Science.gov (United States)

    Perez, Cristina R; Moye, John K; Pritsos, Chris A

    2014-05-08

    Estimation of the surface area of the avian body is valuable for thermoregulation and metabolism studies as well as for assessing exposure to oil and other surface-active organic pollutants from a spill. The use of frozen carcasses for surface area estimations prevents the ability to modify the posture of the bird. The surface area of six live homing pigeons in the fully extended flight position was estimated using a noninvasive method. An equation was derived to estimate the total surface area of a pigeon based on its body weight. A pigeon's surface area in the fully extended flight position is approximately 4 times larger than the surface area of a pigeon in the perching position. The surface area of a bird is dependent on its physical position, and, therefore, the fully extended flight position exhibits the maximum area of a bird and should be considered the true surface area of a bird.

  12. Transparent self-cleaning lubricant-infused surfaces made with large-area breath figure patterns

    Science.gov (United States)

    Zhang, Pengfei; Chen, Huawei; Zhang, Liwen; Ran, Tong; Zhang, Deyuan

    2015-11-01

    Nepenthes pitcher inspired slippery lubricant-infused porous surfaces greatly impact the understanding of liquid-repellent surfaces construction and have attracted extensive attention in recent years due to their potential applications in self-cleaning, anti-fouling, anti-icing, etc. In this work, we have successfully fabricated transparent slippery lubricant-infused surfaces based on breath figure patterns (BFPs). Large-area BFPs with interconnected pores were initially formed on the glass substrate and then a suitable lubricant was added onto the surfaces. The interconnected pores in BFPs were able to hold the lubricant liquid in place and form a stable liquid/solid composite surface capable of repelling a variety of liquids. The liquid-repellent surfaces show extremely low critical sliding angles for various liquids, thus providing the surfaces with efficient self-cleaning property. It was also found that the liquid droplets' sliding behaviors on the surfaces were significantly influenced by the tilting angle of the substrate, liquid volume, liquid chemical properties, and pore sizes of the surfaces.

  13. Surface ozone in the urban area of Manaus, Amazonas, Brazil

    Science.gov (United States)

    Souza, R. A. F. D.; Costa, P. S.; Silva, C.; Godoi, R. M.; Martin, S. T.; Tota, J.; Barbosa, H. M.; Pauliquevis, T.; Ferreira De Brito, J.; Artaxo, P.; Manzi, A. O.; Wolf, S. A.; Cirino, G. G.

    2014-12-01

    When nitrogen oxides from vehicle and industrial emissions mix with volatile organic compounds from trees and plants with exposure to sunlight, a chemical reaction occurs contributing to ground-level ozone pollution. The preliminary results of the surface ozone study in urban area of Manaus, Amazonas State, Brazil, are presented for the first intensive operating period (IOP1) of the GoAmazon experiment (February/March 2014). Photochemical ozone production was found to be a regular process, with an afternoon maximum of the ozone mixing ratio of lower than 20 ppbv for cloudy days or clear sky weather. Typical ozone concentrations at mid-day were low (about 10 ppb). On the other hand, several high-value ozone episodes with surface ozone mixing ratios up to three times larger were registered during the dry season of 2013 (September/October). At the beginning of the wet season, the ozone concentration in Manaus decreased significantly, but diurnal variations can be found during the days with rainfall and other fast changes of meteorological conditions. Possible explanations of the nature of pulsations are discussed. Photochemical ozone production by local urban plumes of Manaus is named as a first possible source of the ozone concentration and biomass burning or power plant emissions are suggested as an alternative or an additional source.

  14. Computing the Surface Area of Three-Dimensional Scanned Human Data

    Directory of Open Access Journals (Sweden)

    Seung-Hyun Yoon

    2016-07-01

    Full Text Available An efficient surface area evaluation method is introduced by using smooth surface reconstruction for three-dimensional scanned human body data. Surface area evaluations for various body parts are compared with the results from the traditional alginate-based method, and quite high similarity between the two results is obtained. We expect that our surface area evaluation method can be an alternative to measuring surface area by the cumbersome alginate method.

  15. Lactose electroisomerization into lactulose: effect of the electrode material, active membrane surface area-to-electrode surface area ratio, and interelectrode-membrane distance.

    Science.gov (United States)

    Aït-Aissa, Amara; Aïder, Mohammed

    2014-01-01

    The aim of the present work was to study and develop an innovative, clean, and environmentally friendly process for lactulose synthesis by electroactivation of lactose. In this work, the electrode material (type 304 stainless steel, titanium, and copper), dimensionless interelectrode-membrane distance at the cathodic compartment (0.36, 0.68, and 1), and the membrane:electrode surface area ratio (0.23, 0.06, and 0.015) were considered to be the factors that could affect the kinetic conversion of lactose into lactulose. The reactions were conducted under an initial lactose concentration of 0.15mol/L at 10°C, Froude number (mixing speed) of 2.05×10(-2), and electric current intensity of 300mA for 30min. The highest lactulose formation yield of 32.50% (0.05mol/L) was obtained by using a copper electrode, interelectrode-membrane distance of 0.36, and membrane:electrode surface area ratio of 0.23. The 2-parameter Langmuir, Freundlich, and Temkin isotherm models were used for the prediction of the lactose isomerization kinetics as well as the 3-parameter Langmuir-Freundlich isotherm model. It was shown that the lactose isomerization kinetics into lactulose followed the Temkin and Langmuir-Freundlich models with coefficients of determination of 0.99 and 0.90 and a relative error of 1.42 to 1.56% and 4.27 to 4.37%, respectively.

  16. Minimal area surfaces dual to Wilson loops and the Mathieu equation

    Science.gov (United States)

    Huang, Changyu; He, Yifei; Kruczenski, Martin

    2016-08-01

    The AdS/CFT correspondence relates Wilson loops in {N}=4 SYM to minimal area surfaces in AdS 5 × S 5 space. Recently, a new approach to study minimal area surfaces in AdS 3 ⊂ AdS 5 was discussed based on a Schroedinger equation with a periodic potential determined by the Schwarzian derivative of the shape of the Wilson loop. Here we use the Mathieu equation, a standard example of a periodic potential, to obtain a class of Wilson loops such that the area of the dual minimal area surface can be computed analytically in terms of eigenvalues of such equation. As opposed to previous examples, these minimal surfaces have an umbilical point (where the principal curvatures are equal) and are invariant under λ-deformations. In various limits they reduce to the single and multiple wound circular Wilson loop and to the regular light-like polygons studied by Alday and Maldacena. In this last limit, the periodic potential becomes a series of deep wells each related to a light-like segment. Small corrections are described by a tight-binding approximation. In the circular limit they are well approximated by an expansion developed by A. Dekel. In the particular case of no umbilical points they reduce to a previous solution proposed by J. Toledo. The construction works both in Euclidean and Minkowski signature of AdS 3.

  17. Human lung volume, alveolar surface area, and capillary length

    DEFF Research Database (Denmark)

    Wiebe, B. M.; Laursen, Henning

    1995-01-01

    Cavalieri's principle, length density, morphometry, stereology, surface density, vertical sections, vertical slices......Cavalieri's principle, length density, morphometry, stereology, surface density, vertical sections, vertical slices...

  18. Extent of Stream Burial and Relationships to Watershed Area, Topography, and Impervious Surface Area

    Directory of Open Access Journals (Sweden)

    Roy E. Weitzell

    2016-11-01

    Full Text Available Stream burial—the routing of streams through culverts, pipes, and concrete lined channels, or simply paving them over—is common during urbanization, and disproportionately affects small, headwater streams. Burial undermines the physical and chemical processes governing life in streams, with consequences for water quality and quantity that may amplify from headwaters to downstream receiving waters. Knowledge of the extent of stream burial is critical for understanding cumulative impacts to stream networks, and for future decision-making allowing for urban development while protecting ecosystem function. We predicted stream burial across the urbanizing Potomac River Basin (USA for each 10-m stream segment in the basin from medium-resolution impervious cover data and training observations obtained from high-resolution aerial photography in a GIS. Results were analyzed across a range in spatial aggregation, including counties and independent cities, small watersheds, and regular spatial grids. Stream burial was generally correlated with total impervious surface area (ISA, with areas exhibiting ISA above 30% often subject to elevated ratios of stream burial. Recurring patterns in burial predictions related to catchment area and topographic slope were also detected. We discuss these results in the context of physiographic constraints on stream location and urban development, including implications for environmental management of aquatic resources.

  19. Working in rural areas – the experiences of Umthombo Youth Development Foundation graduates

    Directory of Open Access Journals (Sweden)

    Andrew J. Ross

    2014-01-01

    Full Text Available Background: Recruiting and retaining healthcare professionals (HCPs for rural areas is challenging throughout the world. Although rural origin HCPs have been identified as being the most likely to work in rural areas, only a small number of rural-origin South African scholars are trained as HCPs each year and many do not return to work in rural areas.Aim: The aim of this article was to present the experiences of rural-origin HCPs who returned to work in a rural area after graduation.Setting: Umthombo Youth Development Foundation has been running an innovating rurally-based scholarship scheme since 1999. By December 2013, 184 students supported by the scheme had graduated and all had returned to work in a rural area for a period of time.Methods: This was a qualitative study using a life history methodology to explore the educational experience of six rural-origin HCPs working in rural areas.Results: The four themes that emerged from the data were: (1 contribution to service delivery; (2 professional development (3 the challenges and frustrations of working in rural hospitals; and (4 the impact of working as an HCP.Conclusion: Rural-origin HCPs are willing to return and work in rural areas. However, context and content factors need to be addressed if a work-back scholarship scheme is to be along-term strategy for the recruitment and retention of HCPs. 

  20. Baseline risk assessment for groundwater operable units at the Chemical Plant Area and the Ordnance Works Area, Weldon Spring, Missouri

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-14

    The U.S. Department of Energy (DOE) and the U.S. Department of the Army (DA) are evaluating conditions in groundwater and springs at the DOE chemical plant area and the DA ordnance works area near Weldon Spring, Missouri. The two areas are located in St. Charles County, about 48 km (30 mi) west of St. Louis. The 88-ha (217-acre) chemical plant area is chemically and radioactively contaminated as a result of uranium-processing activities conducted by the U.S. Atomic Energy Commission in the 1950s and 1960s and explosives-production activities conducted by the U.S. Army (Army) in the 1940s. The 6,974-ha (17,232-acre) ordnance works area is primarily chemically contaminated as a result of trinitrotoluene (TNT) and dinitrotoluene (DNT) manufacturing activities during World War II. This baseline risk assessment (BRA) is being conducted as part of the remedial investigation/feasibility study (RUFS) required under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) of 1980, as amended. The purpose of the BRA is to evaluate potential human health and ecological impacts from contamination associated with the groundwater operable units (GWOUs) of the chemical plant area and ordnance works area. An RI/FS work plan issued jointly in 1995 by the DOE and DA (DOE 1995) analyzed existing conditions at the GWOUs. The work plan included a conceptual hydrogeological model based on data available when the report was prepared; this model indicated that the aquifer of concern is common to both areas. Hence, to optimize further data collection and interpretation efforts, the DOE and DA have decided to conduct a joint RI/BRA. Characterization data obtained from the chemical plant area wells indicate that uranium is present at levels slightly higher than background, with a few concentrations exceeding the proposed U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL) of 20 {micro}g/L (EPA 1996c). Concentrations of other radionuclides (e

  1. High Surface Area Ceria Nanoparticles via Hydrothermal Synthesis Experiment Design

    Directory of Open Access Journals (Sweden)

    Stanislav Kurajica

    2016-01-01

    Full Text Available Hydrothermal synthesis of CeO2 was optimized on two reactant concentrations and synthesis temperature and duration, in order to achieve material having the greatest specific surface area (SSA. Taguchi method of experimental design was employed in evaluation of the relative importance of synthesis parameters. CeO2 nanoparticles were characterized using X-ray diffraction, nitrogen adsorption-desorption isotherms, and scanning electron microscopy. Optimum conditions for obtaining particles with greater SSA were calculated according to Taguchi’s model “the-higher-the-better.” Synthesis temperature was found to be the only parameter significant for enabling nanoparticles with greater SSA. Mesoporous nanocrystalline ceria with SSA as great as 226 m2 g−1 was achieved, which is unprecedented for the hydrothermally synthesized ceria. The reason for this achievement was found in temperature dependence of the diffusion coefficient which, when low, favors nucleation yielding with fine particles, while when high it favors crystal growth and formation of one-dimensional structures. The occurrence of 1D-structure in sample exhibiting the smallest SSA was confirmed. Very fine crystallites with crystallite size as low as 5.9 nm have been obtained being roughly inverse proportional to SSA. Selected samples were tested as catalyst for soot oxidation. Catalyst morphology turned out to be decisive factor for catalytic activity.

  2. Facile synthesis of high surface area molybdenum nitride and carbide

    Science.gov (United States)

    Roy, Aaron; Serov, Alexey; Artyushkova, Kateryna; Brosha, Eric L.; Atanassov, Plamen; Ward, Tim L.

    2015-08-01

    The synthesis of high surface area γ-Mo2N and α-Mo2C is reported (116 and 120 m2/g) without the temperature programmed reduction of MoO3. γ-Mo2N was prepared in an NH3-free synthesis using forming gas (7 at% H2, N2-balance) as the reactive atmosphere. Three precursors were studied ((NH4)6Mo7O24·4H2O, (NH4)2 Mg(MoO4)2, and MgMoO4) along with the sacrificial support method (SSM) as a means of reducing the particle size of Mo2N and Mo2C. In situ X-ray diffraction (XRD) studies were carried out to identify reaction intermediates, the temperature at which various intermediates form, and the average domain size of the Mo2N products. Materials were synthesized in bulk and further characterized by XRD, HRTEM, XPS, and BET.

  3. Preparation and characterization of boron nitride/carbon fiber composite with high specific surface area

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Yan; Fan, Mingwen [Wuhan Univ. (China). Key Laboratory for Oral Biomedical Engineering; Yuan, Songdong; Xiong, Kun; Hu, Kunpeng; Luo, Yi [Hubei Univ. of Technology, Wuhan (China). School of Chemistry and Chemical Engineering; Li, Dong [Hubei Univ. of Technology, Wuhan (China). School of Chemistry and Chemical Engineering; Oxford Univ. (United Kingdom). Chemistry Research Lab.

    2014-06-15

    Boron nitride can be used as a good catalyst carrier because of its high thermal conductivity and chemical stability. However, a high specific surface area of boron nitride is still desirable. In this work, a carbon fiber composite coated with boron nitride villous nano-film was prepared, and was also characterized by means of scanning electron microscopy, high resolution transmission electron microscopy, Fourier transform infrared spectroscopy, and Brunauer-Emmett-Teller analysis. The results indicated that the carbon fibers were covered by uniform villous boron nitride films whose thickness was about 150 - 200 nm. The specific surface area of the boron nitride/carbon fiber composite material was 96 m{sup 2} g{sup -1}, which was markedly improved compared with conventional boron nitride materials. (orig.)

  4. Spontaneous Emulsification of a Metal Drop Immersed in Slag Due to Dephosphorization: Surface Area Quantification

    Science.gov (United States)

    Assis, Andre N.; Warnett, Jason; Spooner, Stephen; Fruehan, Richard J.; Williams, Mark A.; Sridhar, Seetharaman

    2015-04-01

    When a chemical reaction occurs between two immiscible liquids, mass transfer is continuously taking place at the liquid-liquid interface. Several studies have shown that if the species being exchanged between the two liquids are surface-active, a very pronounced decrease in interfacial tension can occur which can lead to a phenomenon called spontaneous emulsification. In steelmaking, this behavior has been observed for several reactions that involve the transfer of impurities from molten steel to a molten-oxide slag but little quantification has been made. This work focuses on spontaneous emulsification due to the dephosphorization of a Fe-P drop immersed in a basic oxygen furnace type slag. An Au-image furnace attached to a confocal scanning laser microscope was used to rapidly heat and cool the samples at different times, and X-ray computerized tomography was used to perform the surface area calculations of the samples where the slag/steel reaction was allowed to occur for distinct times. The results show that the surface area of the metal drop rapidly increases by over one order of magnitude during the first 60 seconds of the reaction while the chemical reaction is occurring at a fast rate. Once the reaction slows down, approximately after 60 seconds, the droplets start to coalesce back together minimizing the surface area and returning to a geometry close to its equilibrium shape.

  5. Understanding the effects of the impervious surfaces pattern on land surface temperature in an urban area

    Science.gov (United States)

    Nie, Qin; Xu, Jianhua

    2015-06-01

    It is well known that urban impervious surface (IS) has a warming effect on urban land surface temperature (LST). However, the influence of an IS's structure, components, and spatial distribution on LST has rarely been quantitatively studied within strictly urban areas. Using ETM+ remote sensing images from the downtown area of Shanghai, China in 2010, this study characterized and quantified the influence of the IS spatial pattern on LST by selecting the percent cover of each IS cover feature and ten configuration metrics. The IS fraction was estimated by linear spectral mixture analysis (LSMA), and LST was retrieved using a mono-window algorithm. The results indicate that high fraction IS cover features account for the majority of the study area. The high fraction IS cover features are widely distributed and concentrated in groups, which is similar with that of high temperature zones. Both the percent composition and the configuration of IS cover features greatly affect the magnitude of LST, but the percent composition is a more important factor in determining LST than the configuration of those features. The significances and effects of the given configuration variables on LST vary greatly among IS cover features.

  6. Reactive surface area in geochemical models - Lessons learned from a natural analogue

    NARCIS (Netherlands)

    Koenen, M.; Wasch, L.J.

    2013-01-01

    Many uncertainties exist in geochemical modeling. Mineral reactive surface area is one of the uncertain parameters. QEMSCAN analyses are performed on sandstone samples from a Dutch CO2 natural analogue to determine reactive surface areas. Geochemical modeling is performed using QEMSCAN surface areas

  7. THE SURFACE AREA PRESERVING MEAN CURVATURE FLOW IN QUASI-FUCHSIAN MANIFOLDS

    Institute of Scientific and Technical Information of China (English)

    Tian Daping; Li Guanghan; Wu Chuanxi

    2012-01-01

    In this paper,we consider the surface area preserving mean curvature flow in quasi-Fuchsian 3-manifolds.We show that the flow exists for all times and converges exponentially to a smooth surface of constant mean curvature with the same surface area as the initial surface.

  8. Measuring Work Functions Of "Dirty" Surfaces With A Vibrating Capacitive Probe

    Science.gov (United States)

    Yost, William T.

    1995-01-01

    Apparatus measures work function of possibly contaminated surface of specimen of metal or other electrically conductive material. Measures work function of specimen indirectly, by vibrating capacitive measurement of contact potential. Work function of specimen affected by microstructure and by contamination.

  9. Develop and test a solvent accessible surface area-based model in conformational entropy calculations.

    Science.gov (United States)

    Wang, Junmei; Hou, Tingjun

    2012-05-25

    It is of great interest in modern drug design to accurately calculate the free energies of protein-ligand or nucleic acid-ligand binding. MM-PBSA (molecular mechanics Poisson-Boltzmann surface area) and MM-GBSA (molecular mechanics generalized Born surface area) have gained popularity in this field. For both methods, the conformational entropy, which is usually calculated through normal-mode analysis (NMA), is needed to calculate the absolute binding free energies. Unfortunately, NMA is computationally demanding and becomes a bottleneck of the MM-PB/GBSA-NMA methods. In this work, we have developed a fast approach to estimate the conformational entropy based upon solvent accessible surface area calculations. In our approach, the conformational entropy of a molecule, S, can be obtained by summing up the contributions of all atoms, no matter they are buried or exposed. Each atom has two types of surface areas, solvent accessible surface area (SAS) and buried SAS (BSAS). The two types of surface areas are weighted to estimate the contribution of an atom to S. Atoms having the same atom type share the same weight and a general parameter k is applied to balance the contributions of the two types of surface areas. This entropy model was parametrized using a large set of small molecules for which their conformational entropies were calculated at the B3LYP/6-31G* level taking the solvent effect into account. The weighted solvent accessible surface area (WSAS) model was extensively evaluated in three tests. For convenience, TS values, the product of temperature T and conformational entropy S, were calculated in those tests. T was always set to 298.15 K through the text. First of all, good correlations were achieved between WSAS TS and NMA TS for 44 protein or nucleic acid systems sampled with molecular dynamics simulations (10 snapshots were collected for postentropy calculations): the mean correlation coefficient squares (R²) was 0.56. As to the 20 complexes, the TS

  10. INVESTIGATION OF HIGH-CURRENT INTERRUPTING CONTACTS WORKING SURFACES MECHANICAL INTERACTION NATURE

    Directory of Open Access Journals (Sweden)

    O.G. Volkova

    2016-03-01

    Full Text Available Introduction. The nature of the interaction of high-working surfaces of the electrical contact uniquely affects their performance. By the failure of the contacts in the main drive processes resulting from complex destructive factors affecting their performance. However, not all processes are studied in detail and give in modeling. The purpose of the paper is to show the possibility of using the method of holographic interferometry to estimate the plastic deformation in the zone of contact interaction. One of the significant factors affecting the work of the contact pair is the compressive force of the contact surfaces. Compression discontinuous contact is directly connected with the processes of elastic and plastic deformation of the contact material, which is particularly evident in the contact details of the powder or composite materials. The paper focuses on the plastic deformation of the surface layers of discontinuous contact in circuit, it is believed that it is directly related to the mechanism of conductivity of contacts. As shown, a significant effect on the deformation of the contact surfaces and renders the working environment, in particular transformer oil. Methodology. Assessing the impact of compression forces on the deformation of the contact surface was conducted experimentally using the method of holographic interferometry. Results. Experimental studies, which indicated that the compact and powder materials plastic deformation in and around the area microcontacts simplistically stated that requires experimental verification. A method for evaluating the state of stress, which affects the formation and destruction of the local contact spots. Practical value. Using the experimental method of determining the movement of the contact region allows you to optimize discontinuous contacts from composite and powder materials.

  11. Organic molecules as sorbing tracers for the assessment of surface areas in consolidated aquifer systems

    Science.gov (United States)

    Schaffer, Mario; Warner, Wiebke; Kutzner, Susann; Börnick, Hilmar; Worch, Eckhard; Licha, Tobias

    2017-03-01

    Based on the assumption that the specific surface area to volume ratio Asurf/V of consolidated rock materials is proportional to the surface area available for sorption, several inorganic cations were recently proposed as sorbing (cation exchanging) tracers for estimating these ratios in aquifers (e.g., for deriving the efficient heat exchange area of geothermal reservoirs). The main disadvantages of inorganic ions, however, are the limited number of suitable ions, their potential geogenic background, and their challenging online detection at trace concentrations. In this work, the spectrum of chemical substances used as sorbing tracers expands by considering fluorescent organic compounds that are cationic. They have the advantage of being highly water soluble and easy to measure online at very low concentrations. Results from systematic lab column experiments with seven selected organic cations under various conditions (different salinities and temperatures) are presented, emphasizing the potential of organic molecules as alternative sorbing tracers especially in consolidated aquifer systems. This work is a first stepping stone in identifying suitable molecular structures that can be selected or even individually adapted to the requirements of the tracer tests and prevailing aquifer conditions.

  12. Mapping land surface emissivity from NDVI: Application to European, African, and South American areas

    Energy Technology Data Exchange (ETDEWEB)

    Valor, E.; Caselles, V. [Univ. de Valencia (Spain). Dept. of Termodinamica

    1996-09-01

    Temperature is an important magnitude for many environmental models: (1) energy and matter exchange between atmosphere and surface, (2) weather prediction, (3) global ocean circulation, (4) climatic change, etc. Several methods have been developed to obtain surface emissivity from satellite data. In this way the authors propose a theoretical model that relates the emissivity to the NDVI (normalized difference vegetation index) of a given surface and explains the experimental behavior observed by van de Griend and Owe. They can use it to obtain the emissivity in any thermal channel, but in this work they have focused on the 10.5- to 12.5-{micro}m region, where most thermal sensors on board satellites work at present.The model is applicable to areas with several soil and vegetation types an where the vegetation cover changes. From the theoretical model the authors have developed an operational methodology to obtain the effective emissivity combining satellite images and field measurements.The error of the methodology ranges from 0.5% (due to the experimental limitations of the field methods) to 2% (considering the case in which they have no information about the studied area). To check the general validity of the model, the authors have validated and applied it in different atmospheric environments and in areas with a different degree of roughness, i.e., from midlatitude (France, Argentina) to tropical (Sahel, Botswana) atmospheres, and from flat (La Mancha, Spain) to rough (Valencia, Spain) surfaces, and they have obtained an error of estimate of 0.6% on the emissivity.

  13. Dependence of the specific surface area of the nuclear fuel with the matrix oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, F.; Quinones, J.; Iglesias, E.; Rodriguez, N. [CIEMAT. Avda. Complutense 22, 28040-Madrid (Spain)

    2008-07-01

    This paper is focused on the study of the changes in the specific surface area measured using BET techniques. The objective is to obtain a relation between this parameter and the change in the matrix stoichiometry (i.e., oxidation increase). None of the actual models used for extrapolating the behaviour of the spent fuel matrix under repository conditions have included this dependence yet. In this work the specific surface area of different uranium oxide were measured using N{sub 2}(g) and Kr(g). The starting material was UO{sub 2+x}(s) with a size powder distribution lower than 20 {mu}m. The results included in this paper shown a strong dependence on specific surface area with the matrix stoichiometry, i.e., and increase of more than one order of magnitude (SUO{sub 2} = 6 m{sup 2}*g{sup -1} and SU{sub 3}O{sub 8} = 16.07 m{sup 2}*g{sup -1}). Furthermore, the particle size distribution measured as a function of the thermal treatment done shows changes on the powder size related to the changes observed in the uranium oxide stoichiometry. (authors)

  14. Effects of acid treatment on the clay palygorskite: XRD, surface area, morphological and chemical composition

    Energy Technology Data Exchange (ETDEWEB)

    Xavier, Katiane Cruz Magalhaes; Santos, Maria do Socorro Ferreira dos; Santos, Maria Rita Morais Chaves; Oliveira, Marilia Evelyn Rodrigues; Osajima, Josy Antevelli; Silva Filho, Edson Cavalcanti da [Universidade Federal do Piaui (UFPI), Teresina, PI (Brazil); Carvalho, Maria Wilma Nunes Cordeiro, E-mail: edsonfilho@ufpi.edu.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

    2014-08-15

    The palygorskite is an aluminum-magnesium silicate that has a fibrous morphology. Their physicochemical characteristics are the result of high surface area, porosity and thermal resistance which make it an attractive adsorbent. Its adsorption capacity can be increased through chemical reactions and/or heat treatments. The objective of this work is to verify the effects of acid activation on the palygorskite, treated with HCl at 90 °C at concentrations of 2, 4 and 6 mol L{sup -1} in 2 and 4 hours, with clay/acid solution ratio 1 g 10 mL{sup -1} and characterized by techniques: XRF, XRD and surface area. A significant increase in specific surface area was observed in the sample treated with HCl at the concentration 6 mol L{sup -1}. The changes were more pronounced at stricter concentrations of acidity, with decreasing intensity of reflection of the clay indicated in the XRD. These changes were confirmed in the XRF with the leaching of some oxides and with increasing concentration of SiO{sub 2}. (author)

  15. The Carnot Cycle and Area-Specific Work Equivalence on a Skew T-logp Diagram

    National Research Council Canada - National Science Library

    Alex DeCaria

    2008-01-01

      Attempts to calculate the area to specific work equivalence on a skew T-logp diagram for a Carnot cycle can lead to large errors if the pressures of the nodes of the cycle are estimated from the diagram...

  16. Work motivation and job satisfaction of health workers in urban and rural areas

    National Research Council Canada - National Science Library

    Grujicic, Maja; Jovicic-Bata, Jelena; Radjen, Slavica; Novakovic, Budimka; Sipetic-Grujicic, Sandra

    2016-01-01

    .... The aim of this study was to investigate whether there was a difference in work motivation and job satisfaction between health workers in urban and rural areas in the region of Central Serbia. Methods...

  17. Primary role of electron work function for evaluation of nanostructured titania implant surface against bacterial infection.

    Science.gov (United States)

    Golda-Cepa, M; Syrek, K; Brzychczy-Wloch, M; Sulka, G D; Kotarba, A

    2016-09-01

    The electron work function as an essential descriptor for the evaluation of metal implant surfaces against bacterial infection is identified for the first time. Its validity is demonstrated on Staphylococcus aureus adhesion to nanostructured titania surfaces. The established correlation: work function-bacteria adhesion is of general importance since it can be used for direct evaluation of any electrically conductive implant surfaces.

  18. Detecting changes in surface water area of Lake Kyoga sub-basin using remotely sensed imagery in a changing climate

    Science.gov (United States)

    Nsubuga, F. W. N.; Botai, Joel O.; Olwoch, Jane M.; Rautenbach, C. J. deW; Kalumba, Ahmed M.; Tsela, Philemon; Adeola, Abiodun M.; Sentongo, Ausi A.; Mearns, Kevin F.

    2017-01-01

    Detection of changes in Earth surface features, for example lakes, is important for understanding the relationships between human and natural phenomena in order to manage better the increasingly scarce natural resources. This work presents a procedure of using modified normalised difference water index (MNDWI) to detect fluctuations of lake surface water area and relate it to a changing climate. The study used radiometrically and geometrically rectified Landsat images for 1986, 1995 and 2010 encompassing the Kyoga Basin lakes of Uganda, in order to investigate the changes in surface water area between the respective years. The standard precipitation index (SPI) and drought severity index (DSI) are applied to show the relationship between variability of surface water area and climate parameters. The present analysis reveals that surface water area fluctuation is linked to rainfall variability. In particular, Lake Kyoga sub-basin lakes experienced an increase in surface water area in 2010 compared to 1986. This work has important implications to water resources management for Lake Kyoga and could be vital to water resource managers across Ugandan lakes.

  19. Properties that influence the specific surface areas of carbon nanotubes and nanofibers.

    Science.gov (United States)

    Birch, M Eileen; Ruda-Eberenz, Toni A; Chai, Ming; Andrews, Ronnee; Hatfield, Randal L

    2013-11-01

    Commercially available carbon nanotubes and nanofibers were analyzed to examine possible relationships between their Brunauer-Emmett-Teller specific surface areas (SSAs) and their physical and chemical properties. Properties found to influence surface area were number of walls/diameter, impurities, and surface functionalization with hydroxyl and carboxyl groups. Characterization by electron microscopy, energy-dispersive X-ray spectrometry, thermogravimetric analysis, and elemental analysis indicates that SSA can provide insight on carbon nanomaterials properties, which can differ vastly depending on synthesis parameters and post-production treatments. In this study, how different properties may influence surface area is discussed. The materials examined have a wide range of surface areas. The measured surface areas differed from product specifications, to varying degrees, and between similar products. Findings emphasize the multiple factors that influence surface area and mark its utility in carbon nanomaterial characterization, a prerequisite to understanding their potential applications and toxicities. Implications for occupational monitoring are discussed.

  20. RCT: Module 2.10, Access Control and Work Area Setup, Course 8776

    Energy Technology Data Exchange (ETDEWEB)

    Hillmer, Kurt T. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-08-11

    This course presents information on radiological work permits (RWPs), various types of postings used in radiological areas, radiological area setups, access controls, and releases of material from radiological areas. All of these are fundamental duties of RCTs. This course will prepare the student with the skills necessary for radiological control technician (RCT) qualification by passing quizzes, tests, and the RCT Comprehensive Phase 1, Unit 2 Examination (TEST 27566) and providing in-thefield skills.

  1. High-surface-area silica nanospheres (KCC-1) with a fibrous morphology

    KAUST Repository

    Polshettiwar, Vivek

    2010-08-02

    Fibrous nanosilica: A new family of high-surface-area silica nanospheres (KCC-1) have been prepared (see picture). KCC-1 features excellent physical properties, including high surface area, unprecedented fibrous surface morphology, high thermal (up to 950 °C) and hydrothermal stabilities, and high mechanical stability. Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Effect of impervious surface area and vegetation changes on mean ...

    African Journals Online (AJOL)

    adeniyi adeyemi

    1 Department of Geography, Geoinformatics and Meteorology, University of Pretoria, .... temperature image to Land Surface Temperature (LST) using the equation ..... For example, the study presented the extent of formation urban heat island ...

  3. Laser grooving of surface cracks on hot work tool steel

    Directory of Open Access Journals (Sweden)

    D. Klobčar

    2011-10-01

    Full Text Available The paper presents the analysis of laser grooving of 1.2343 tool steel hardened to 46 HRC. The effect of laser power and grooving speed on groove shape (i.e. depth and width, the material removal rate and the purity of produced groove as a measure of groove quality was investigated and analyzed using response surface methodology. Optimal parameters of laser grooving were found, which enables pure grooves suitable for laser welding.

  4. Rate of evolution of the specific surface area of surface snow layers.

    Science.gov (United States)

    Cabanes, Axel; Legagneux, Loïc; Dominé, Florent

    2003-02-15

    The snowpack can impact atmospheric chemistry by exchanging adsorbed or dissolved gases with the atmosphere. Modeling this impact requires the knowledge of the specific surface area (SSA) of snow and its variations with time. We have therefore measured the evolution of the SSA of eight recent surface snow layers in the Arctic and the French Alps, using CH4 adsorption at liquid nitrogen temperature (77 K). The SSA of fresh snow layers was found to decrease with time, from initial values in the range 613-1540 cm2/g to values as low as 257 cm2/g after 6 days. This is explained by snow metamorphism, which causes modifications in crystal shapes, here essentially crystal rounding and the disappearance of microstructures. A parametrization of the rate of SSA decrease is proposed. We fit the SSA decrease to an exponential law and find that the time constant alpha(exp) (day(-1)) depends on temperature according to alpha(exp) = 76.6 exp (-1708/7), with Tin kelvin. Our parametrization predicts that the SSA of a snow layer evolving at -40 degrees C will decrease by a factor of 2 after 14 days, while a similar decrease at -1 degrees C will only require 5 days. Wind was found to increase the rate of SSA decrease, but insufficient data did not allow a parametrization of this effect.

  5. Work motivation and job satisfaction of health workers in urban and rural areas

    Directory of Open Access Journals (Sweden)

    Grujičić Maja

    2016-01-01

    Full Text Available Background/Aim. Motivated and job satisfied health professionals represent a basis of success of modern health institutions. The aim of this study was to investigate whether there was a difference in work motivation and job satisfaction between health workers in urban and rural areas in the region of Central Serbia. Methods. The study included 396 health professionals from urban setting, and 436 from a rural area, employed in four randomly selected health facilities. An anonymous questionnaire was used for data gathering. Statistical analysis was performed using χ2, Student t-test, Spearman's correlation coefficient, and logistic regression analysis. Results. Urban health professionals were significantly more motivated and job satisfied than respondents from rural area. In relation to work motivation factors and job satisfaction of health professionals in urban and rural areas, there were no significant differences in working conditions and current equipment, and in terms of job satisfaction there were no significant differences in relation to income either. Conclusion. In order to increase the level of work motivation and job satisfaction of health workers in rural areas, apart from better income, they should get more assistance and support from their supervisors, and awards for good job performance; interpersonal relationships, promotion and advancement opportunities, managerial performance and cooperation at work should be improved; employment security should be provided, as well as more independence at work, with professional supervision of health workers.

  6. Primary role of electron work function for evaluation of nanostructured titania implant surface against bacterial infection

    Energy Technology Data Exchange (ETDEWEB)

    Golda-Cepa, M., E-mail: golda@chemia.uj.edu.pl [Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Krakow (Poland); Syrek, K. [Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Krakow (Poland); Brzychczy-Wloch, M. [Department of Bacteriology, Microbial Ecology and Parasitology, Jagiellonian University Medical College, Czysta 18, 31-121 Krakow (Poland); Sulka, G.D. [Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Krakow (Poland); Kotarba, A., E-mail: kotarba@chemia.uj.edu.pl [Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Krakow (Poland)

    2016-09-01

    The electron work function as an essential descriptor for the evaluation of metal implant surfaces against bacterial infection is identified for the first time. Its validity is demonstrated on Staphylococcus aureus adhesion to nanostructured titania surfaces. The established correlation: work function–bacteria adhesion is of general importance since it can be used for direct evaluation of any electrically conductive implant surfaces. - Highlights: • The correlation between work function and bacteria adhesion was discovered. • The discovered correlation is rationalized in terms of electrostatic bacteria–surface repulsion. • The results provide basis for the simple evaluation of implant surfaces against infection.

  7. High ethanol sensitivity of palladium/TiO2 nanobelt surface heterostructures dominated by enlarged surface area and nano-Schottky junctions.

    Science.gov (United States)

    Wang, Dongzhou; Zhou, Weijia; Hu, Peiguang; Guan, Yu; Chen, Limei; Li, Jianhua; Wang, Guancong; Liu, Hong; Wang, Jiyang; Cao, Guozhong; Jiang, Huaidong

    2012-12-15

    TiO(2) nanobelts were prepared by the hydrothermal growth method. The surface of the nanobelts was coarsened by selective acid corrosion and functionalized with Pd catalyst particles. Three nanobelt samples (TiO(2) nanobelts, surface-coarsened TiO(2) nanobelts and Pd nanoparticle/TiO(2) nanobelt surface heterostructures) were configured as gas sensors and their sensing ability was measured. Both the surface-coarsened nanobelts and the Pd nanoparticle-decorated TiO(2) nanobelts exhibited dramatically improved sensitivity to ethanol vapor. Pd nanoparticle-decorated TiO(2) nanobelts with surface heterostructures exhibited the best sensitivity, selectivity, working temperature, response/recovery time, and reproducibility. The excellent ethanol sensing performance is attributed to the large surface area and enhancement by Schottky barrier-type junctions between the Pd nanoparticles and TiO(2) nanobelts.

  8. Surface deformation of active volcanic areas retrieved with the SBAS-DInSAR technique: an overview

    Directory of Open Access Journals (Sweden)

    G. Zeni

    2008-06-01

    Full Text Available This paper presents a comprehensive overview of the surface deformation retrieval capability of the Differential Synthetic Aperture Radar Interferometry (DInSAR algorithm, referred to as Small BAseline Subset (SBAS technique, in the context of active volcanic areas. In particular, after a brief description of the algorithm some experiments relevant to three selected case-study areas are presented. First, we concentrate on the application of the SBAS algorithm to a single-orbit scenario, thus considering a set of SAR data composed by images acquired on descending orbits by the European Remote Sensing (ERS radar sensors and relevant to the Long Valley caldera (eastern California area. Subsequently, we address the capability of the SBAS technique in a multipleorbit context by referring to Mt. Etna volcano (southern Italy test site, with respect to which two different ERS data set, composed by images acquired both on ascending and descending orbits, are available. Finally, we take advantage of the capability of the algorithm to work in a multi-platform scenario by jointly exploiting two different sets of SAR images collected by the ERS and the Environment Satellite (ENVISAT radar sensors in the Campi Flegrei caldera (southern Italy area. The presented results demonstrate the effectiveness of the algorithm to investigate the deformation field in active volcanic areas and the potential of the DInSAR methodologies within routine surveillance scenario.

  9. Effect of Activating Agent on the Preparation of Bamboo-Based High Surface Area Activated Carbon by Microwave Heating

    Science.gov (United States)

    Xia, Hongying; Wu, Jian; Srinivasakannan, Chandrasekar; Peng, Jinhui; Zhang, Libo

    2016-06-01

    The present work attempts to convert bamboo into a high surface area activated carbon via microwave heating. Different chemical activating agents such as KOH, NaOH, K2CO3 and Na2CO3 were utilized to identify a most suitable activating agent. Among the activating agents tested KOH was found to generate carbon with the highest porosity and surface area. The effect of KOH/C ratio on the porous nature of the activated carbon has been assessed. An optimal KOH/C ratio of 4 was identified, beyond which the surface area as well as the pore volume were found to decrease. At the optimized KOH/C ratio the surface area and the pore volume were estimated to be 3,441 m2/g and 2.093 ml/g, respectively, with the significant proportion of which being microporous (62.3%). Activated carbon prepared under the optimum conditions was further characterized using Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM). Activated carbons with so high surface area and pore volume are very rarely reported, which could be owed to the nature of the precursor and the optimal conditions of mixture ratio adopted in the present work.

  10. A highly permeable and enhanced surface area carbon-cloth electrode for vanadium redox flow batteries

    Science.gov (United States)

    Zhou, X. L.; Zhao, T. S.; Zeng, Y. K.; An, L.; Wei, L.

    2016-10-01

    In this work, a high-performance porous electrode, made of KOH-activated carbon-cloth, is developed for vanadium redox flow batteries (VRFBs). The macro-scale porous structure in the carbon cloth formed by weaving the carbon fibers in an ordered manner offers a low tortuosity (∼1.1) and a broad pore distribution from 5 μm to 100 μm, rendering the electrode a high hydraulic permeability and high effective ionic conductivity, which are beneficial for the electrolyte flow and ion transport through the porous electrode. The use of KOH activation method to create nano-scale pores on the carbon-fiber surfaces leads to a significant increase in the surface area for redox reactions from 2.39 m2 g-1 to 15.4 m2 g-1. The battery assembled with the present electrode delivers an energy efficiency of 80.1% and an electrolyte utilization of 74.6% at a current density of 400 mA cm-2, as opposed to an electrolyte utilization of 61.1% achieved by using a conventional carbon-paper electrode. Such a high performance is mainly attributed to the combination of the excellent mass/ion transport properties and the high surface area rendered by the present electrode. It is suggested that the KOH-activated carbon-cloth electrode is a promising candidate in redox flow batteries.

  11. Large-area fabrication of superhydrophobic surfaces for practical applications: an overview

    Science.gov (United States)

    Xue, Chao-Hua; Jia, Shun-Tian; Zhang, Jing; Ma, Jian-Zhong

    2010-01-01

    This review summarizes the key topics in the field of large-area fabrication of superhydrophobic surfaces, concentrating on substrates that have been used in commercial applications. Practical approaches to superhydrophobic surface construction and hydrophobization are discussed. Applications of superhydrophobic surfaces are described and future trends in superhydrophobic surfaces are predicted. PMID:27877336

  12. Large-area fabrication of superhydrophobic surfaces for practical applications: an overview

    Directory of Open Access Journals (Sweden)

    Chao-Hua Xue, Shun-Tian Jia, Jing Zhang and Jian-Zhong Ma

    2010-01-01

    Full Text Available This review summarizes the key topics in the field of large-area fabrication of superhydrophobic surfaces, concentrating on substrates that have been used in commercial applications. Practical approaches to superhydrophobic surface construction and hydrophobization are discussed. Applications of superhydrophobic surfaces are described and future trends in superhydrophobic surfaces are predicted.

  13. Large-area fabrication of superhydrophobic surfaces for practical applications: an overview

    OpenAIRE

    Xue, Chao-Hua; Jia, Shun-Tian; Zhang, Jing; Ma, Jian-Zhong

    2010-01-01

    This review summarizes the key topics in the field of large-area fabrication of superhydrophobic surfaces, concentrating on substrates that have been used in commercial applications. Practical approaches to superhydrophobic surface construction and hydrophobization are discussed. Applications of superhydrophobic surfaces are described and future trends in superhydrophobic surfaces are predicted.

  14. Pore-Scale Heterogeneity in the Mineral Distribution and Reactive Surface Area of Porous Rocks

    Science.gov (United States)

    Lai, P. E. P.; Krevor, S. C.

    2015-12-01

    The reactive surface area is an important control on interfacial processes between minerals and aqueous fluids in porous rocks. Spatial heterogeneity in the surface area can lead to complications in modelling reactive transport processes, but quantitative characterisation of this property has been limited. In this paper 3D images obtained using x-ray micro-tomography were used to characterise heterogeneity in surface area in one sandstone and five carbonate rocks. Measurements of average surface area from x-ray imagery were 1-2 orders of magnitude lower than measurements from nitrogen BET. A roughness factor, defined as the ratio of BET surface area to x-ray based surface area, was correlated to the presence of clay or microporosity. Coregistered images of Berea sandstone from x-ray and energy dispersive spectroscopy imagery were used to guide the identification of quartz, K-feldspar, dolomite, calcite and clays in x-ray images. In Berea sandstone, clay and K-feldspar had higher average surface area fractions than their volumetric fractions in the rock. In the Edwards carbonate, however, modal mineral composition correlated with surface area. By sub-sampling digital images, statistical distributions of the surface area were generated at various length scales of subsampling. Comparing these to distributions used in published modelling studies showed that the common practice of leaving surface area and pore volume uncorrelated in a pore leads to unrealistic combinations of surface area and pore volume in the models. We suggest these models adopt a moderate correlation based on observations. In Berea sandstone, constraining ratios of surface area to pore volume to a range of values between that of quartz-lined and five times that of clay-lined spheres appeared sufficient.

  15. Surface albedo measurements in Mexico City metropolitan area

    Energy Technology Data Exchange (ETDEWEB)

    Castro, T; Mar, B; Longoria, R; Ruiz Suarez, L. G [Centro de Ciencias de la Atmosfera, UNAM, Mexico, D.F. (Mexico); Morales, L [Instituto de Geografia, UNAM, Mexico, D.F. (Mexico)

    2001-04-01

    Optical and thermal properties of soils are important input data for the meteorological and photochemical modules of air quality models. As development of these models increase on spatial resolution good albedo data become more important. In this paper measurements of surface albedo of UV (295-385 nm) and visible (450-550 nm) radiation are reported for different urban and rural surfaces in the vicinity of Mexico City. It was found for the downtown zone and average albedo value of 0.05 which is in very good agreement with reported values for urban surfaces. Our albedo values measured in UV region for grey cement and green grass are of 0.10 and 0.009, respectively, and quite similar to those found at the literature of 0.11 and 0.008 for those type of surfaces. [Spanish] Las propiedades opticas y termicas de suelos son datos importantes para los modulos meteorologicos y fotoquimicos de los modelos de calidad del aire. Conforme aumenta la resolucion espacial del modelo se vuelve mas importante contar con buenos datos de albedo. En este articulo se presentan mediciones de albedo superficial de radiacion Ultravioleta (295-385 nm) y visible (450-550 nm) para diferentes superficies urbanas. Los valores medidos de albedo en la region UV para cemento gris y pasto verde son de 0.10 y 0.009, respectivamente, y son muy similares a los reportados en la literatura, 0.11 y 0.008 para este tipo de superficies.

  16. Synthesis and Characterization of Large Surface Area Yttrium Oxide by Precipitation Method

    Institute of Scientific and Technical Information of China (English)

    崔大立; 龙志奇; 张顺利; 崔梅生; 黄小卫

    2004-01-01

    The method for preparing yttrium oxide with large specific surface area was introduced. By means of BET, SEM, TG and DTA analysis, the effects of precipitant, stirring velocity, non-RE impurity in solution, calcination temperature, on the surface area were studied respectively. The Y2O3 sample with specific surface area of more than 60 m2*g-1 and L.O.I less than 1% was prepared in the suitable precipitation condition and calcinations temperature when the ammonia used as precipitant. The SEM shows that the Y2O3 prepared with large surface area is the aggregation of about 50 nm particles.

  17. Low-work-function surfaces produced by cesium carbonate decomposition

    Science.gov (United States)

    Briere, T. R.; Sommer, A. H.

    1977-01-01

    Cesium carbonate (Cs2CO3) was heated to the decomposition temperature of approximately 600 C. The nonvolatile decomposition products were condensed on a nickel substrate while the carbon dioxide was removed by pumping. The deposited material is characterized by an effective work function of between 1.05 and 1.15 eV at 450 K and by photoemission in the visible and near-infrared region of the spectrum. It is suggested that the deposited material consists of Cs2O, possibly Cs2O2, and adsorbed cesium. Silver, evaporated from a heated silver bead, produced the typical photoemissive and thermionic properties of a silver-oxygen-cesium (S-1) photocathode. The material may be of interest for thermionic energy converters and for the formation of silver-oxygen-cesium photocathodes.

  18. Effects of CO/sub 2/ enrichment on internal leaf surface area in soybeans

    Energy Technology Data Exchange (ETDEWEB)

    Leadley, P.W.; Reynolds, J.A.; Thomas, J.F.; Reynolds, J.F.

    1987-06-01

    Internal cell surface areas were measured on fully expanded leaves of soybean seedlings that had been continuously exposed to 348 or 645 ppm CO/sub 2/ environments. Plants grown in the high CO/sub 2/ treatment had thicker leaves but less palisade cell surface area per unit of leaf area. Surface area of the mesophyll per unit leaf area was unaffected by CO/sub 2/. The potential ramifications of these CO/sub 2/-induced changes in leaf anatomy on photosynthesis and water-use efficiency are explored.

  19. Youth work in a marginalized area and its contribution to social mobility and social justice

    DEFF Research Database (Denmark)

    Brønsted, Lone Bæk; Larsen, Vibe; Tireli, Üzeyir

    2016-01-01

    This paper addresses the question of how professionals involved in social pedagogical work in a marginalized area deal with young people’s possibilities of social mobility. Based on interviews with teachers, social pedagogues, pedagogical assistants, educational supervisors, street workers...... mobility therefore results in a form of social reproduction. The paper draws on data from an ethnographic fieldwork conducted in Copenhagen in 2013-2015 as part of a larger research project: “Youth, Social Communities and Educational Challenges”...... and municipal employees and observations in youth clubs this paper carries out an analysis of the conditions for social pedagogical work in a socially deprived area in Copenhagen as experienced by these professionals. The paper puts special emphasis on the fact that the youth work takes place in an area...

  20. Youth work in a marginalized area and its contribution to social mobility and social justice

    DEFF Research Database (Denmark)

    Tireli, Üzeyir; Brønsted, Lone Bæk; Larsen, Vibe

    and municipal employees and observations in youth clubs this paper carries out an analysis of the conditions for social pedagogical work in a socially deprived area in Copenhagen as experienced by these professionals. The paper puts special emphasis on the fact that the youth work takes place in an area......This paper addresses the question of how professionals involved in social pedagogical work in a marginalized area deal with young people’s possibilities of social mobility. Based on interviews with teachers, social pedagogues, pedagogical assistants, educational supervisors, street workers...... mobility therefore results in a form of social reproduction. The paper draws on data from an ethnographic fieldwork conducted in Copenhagen in 2013-2015 as part of a larger research project: “Youth, Social Communities and Educational Challenges”...

  1. The increase of surface area of a Brazilian palygorskite clay activated with sulfuric acid solutions using a factorial design

    Directory of Open Access Journals (Sweden)

    R. N. Oliveira

    2013-01-01

    Full Text Available Palygorskite is fibrous clay in which the structural tetrahedral and octahedral layers are organized in a way that structural channels are formed, leading to high surface area. However, impurities inside the channels and aggregated ones considerably reduce the available area. In order to increase the surface area, an activation treatment can be considered useful. The goal of this work is the activation of palygorskite from Guadalupe, Piauí, via sulfuric acid treatment using a two-level factorial design. The influence of three parameters (solution molarity, temperature and time on BET surface area was determined. Moreover, samples were characterized via X-ray diffraction (XRD and fluorescence (XRF, Fourier-transform infrared spectroscopy (FTIR and transmission electron microscopy (TEM. The largest surface area (282 m²/g without considerable changes in clay structure and morphology was found in a sample treated with 5M H2SO4 at 70°C for 1h. The main parameters that favored the improvement of the surface area were the solution's molarity, temperature and their interaction.

  2. NOTE TO ASSOCIATED MEMBERS OF THE PERSONNEL ('USERS') WORKING IN CONTROLLED AREAS

    CERN Multimedia

    Medical Service

    2002-01-01

    Associated members of the personnel who have to work in controlled radiation areas or with radioactive sources must be in possession of a dosimeter, to be collected at the Individual Dosimetry Service (24- E-011, tel. 72155), as well as a recent medical certificate (less than 6 months old). A model of this certificate, as well as the procedures for registration, is available on the Web. This certificate MUST be sent to the CERN Medical Service (fax 767 92 00) BEFORE beginning work in controlled areas and must be renewed every 24 months. Medical Service Individual Dosimetry Service

  3. NOTE TO ASSOCIATED MEMBERS OF THE PERSONNEL ('USERS') WORKING IN CONTROLLED AREAS

    CERN Multimedia

    Medical Service

    2002-01-01

    Associated members of the personnel who have to work in controlled radiation areas or with radioactive sources must be in possession of a dosimeter, to be collected at the Individual Dosimetry Service (24- E-011, tel. 72155, Monday-Friday 8:30-12:00, 14:00-17:00), as well as a recent medical certificate (less than 6 months old). A model of this certificate, as well as the procedures for registration, is available on the Web here: This certificate MUST be sent to the CERN Medical Service (FAX=767 92 00) BEFORE beginning work in controlled areas and must be renewed every 24 months. Medical Service Individual Dosimetry Service

  4. NOTE TO ASSOCIATED MEMBERS OF THE PERSONNEL ('USERS') WORKING IN CONTROLLED AREAS

    CERN Multimedia

    Medical Service

    2002-01-01

    Associated members of the personnel who have to work in controlled radiation areas or with radioactive sources must be in possession of a dosimeter, to be collected at the Individual Dosimetry Service (24- E-011, tel. 72155, Monday-Friday 8:30-12:00, 14:00-17:00), as well as a recent medical certificate (less than 6 months old). A model of this certificate, as well as the procedures for registration, is available on the Web. This certificate MUST be sent to the CERN Medical Service (FAX=767 92 00) BEFORE beginning work in controlled areas and must be renewed every 24 months. Medical Service Individual Dosimetry Service

  5. How to understand architectural quality when working with social housing areas

    DEFF Research Database (Denmark)

    Jensen, Kirstine Brøgger

    2015-01-01

    This paper debates how to understand architectural quality when working with social housing areas. The concept is discussed through three approaches: 1) Social housing is debated in relation to societal and historical contributions. 2) Well known definitions (from the old-timer Vitruvius...... to the current sustainability agenda) are outlined according to their pros´n cons when working with social housing areas. 3) On the ground of interviews with practitioners the everyday use and understanding of the concept is scrutinized In this vein the paper agitates that architectural quality in social housing...

  6. Thermal stability of the work function of NEA type surfaces. [Negative Electron Affinity

    Science.gov (United States)

    Edwards, D., Jr.; Peria, W. T.

    1978-01-01

    The work-function stability of both Si(100) and Ge(100) surfaces activated with adsorptions of cesium and oxygen has been determined. In general, it has been found that the highest temperature to which the optimized Ge surface could be heated without an increase in its work function (1.06 eV) was about 200 C, whereas the optimized Si surface could be heated to approximately 250 C without a significant increase in the optimized work function (0.93 eV). Details are also presented on various characteristics of cesium and oxygen adsorption-desorption on these surfaces.

  7. HUBUNGAN ANTARA PSYCHOLOGICAL CAPITAL DENGAN WORK ENGAGEMENT PADA KARYAWAN PT. BANK MEGA REGIONAL AREA SEMARANG

    Directory of Open Access Journals (Sweden)

    Dwi Ari Setyo Nugroho

    2015-07-01

    Full Text Available This study aimed to assess the relationship between psychological capital with work engagement employees of PT. Bank Mega Regional Area Semarang. Psychological capital is an individual’s positive psychological state of development and is characterized by self- efficacy, optimism, hope and resiliency. Then, work engagement is defined as a positive, fulfilling, work-related state of mind that is characterized by vigor, dedication, and absorption. This study used proportional sampling technique. The subjects were all employees of PT. Bank Mega Regional Area Semarang which have staff levels (N=73. The research instrument was psychological capital scales with 28 items (α = 0.953 and work engagement scales with 29 items (α = 0.938. The results by simple regression analysis obtained rxy = 0.716, with p value = 0.000 (p <0.05. The results indicated that there was a positive correlation between psychological capital and work engagement. The higher psychological capital was higher work engagement. Coefficient of determination by 51,3, it meaning that psychological capital effectively contributed for 51,3 % of work engagement. The remaining 48,7 % determined by other factors that are not revealed in this study, for example: job resources and job demands. Keywords: Psychological capital, work engagement, employee

  8. The effects of leaf roughness, surface free energy and work of adhesion on leaf water drop adhesion.

    Directory of Open Access Journals (Sweden)

    Huixia Wang

    Full Text Available The adhesion of water droplets to leaves is important in controlling rainfall interception, and affects a variety of hydrological processes. Leaf water drop adhesion (hereinafter, adhesion depends not only on droplet formulation and parameters but also on the physical (leaf roughness and physico-chemical (surface free energy, its components, and work-of-adhesion properties of the leaf surface. We selected 60 plant species from Shaanxi Province, NW China, as experimental materials with the goal of gaining insight into leaf physical and physico-chemical properties in relation to the adhesion of water droplets on leaves. Adhesion covered a wide range of area, from 4.09 to 88.87 g/m(2 on adaxial surfaces and 0.72 to 93.35 g/m(2 on abaxial surfaces. Distinct patterns of adhesion were observed among species, between adaxial and abaxial surfaces, and between leaves with wax films and wax crystals. Adhesion decreased as leaf roughness increased (r =  -0.615, p = 0.000, but there were some outliers, such as Salix psammophila and Populus simonii with low roughness and low adhesion, and the abaxial surface of Hyoscyamus pusillus and the adaxial surface of Vitex negundo with high roughness and high adhesion. Meanwhile, adhesion was positively correlated with surface free energy (r = 0.535, p = 0.000, its dispersive component (r = 0.526, p = 0.000, and work of adhesion for water (r = 0.698, p = 0.000. However, a significant power correlation was observed between adhesion and the polar component of surface free energy (p = 0.000. These results indicated that leaf roughness, surface free energy, its components, and work-of-adhesion for water played important roles in hydrological characteristics, especially work-of-adhesion for water.

  9. BLM National Surface Management Agency: Area Polygons, Withdrawal Area Polygons, and Special Public Purpose Withdrawal Area Polygons

    Data.gov (United States)

    Federal Geographic Data Committee — The SMA implementation is comprised of one feature dataset, with several polygon feature classes, rather than a single feature class. SurfaceManagementAgency: The...

  10. Snow specific surface area simulation using the one-layer snow model in the Canadian LAnd Surface Scheme (CLASS)

    OpenAIRE

    2013-01-01

    Snow grain size is a key parameter for modeling microwave snow emission properties and the surface energy balance because of its influence on the snow albedo, thermal conductivity and diffusivity. A model of the specific surface area (SSA) of snow was implemented in the one-layer snow model in the Canadian LAnd Surface Scheme (CLASS) version 3.4. This offline multilayer model (CLASS-SSA) simulates the decrease of SSA based on snow age, snow temperature and t...

  11. Hydrogen-terminated mesoporous silicon monoliths with huge surface area as alternative Si-based visible light-active photocatalysts

    KAUST Repository

    Li, Ting

    2016-07-21

    Silicon-based nanostructures and their related composites have drawn tremendous research interest in solar energy storage and conversion. Mesoporous silicon with a huge surface area of 400-900 m2 g-1 developed by electrochemical etching exhibits excellent photocatalytic ability and stability after 10 cycles in degrading methyl orange under visible light irradiation, owing to its unique mesoporous network, abundant surface hydrides and efficient light harvesting. This work showcases the profound effects of surface area, crystallinity, pore topology on charge migration/recombination and mass transportation. Therein the ordered 1D channel array has outperformed the interconnected 3D porous network by greatly accelerating the mass diffusion and enhancing the accessibility of the active sites on the extensive surfaces. © 2016 The Royal Society of Chemistry.

  12. High surface area carbon black (BP-2000) as a reinforcing agent for poly[(₋)-lactide

    Energy Technology Data Exchange (ETDEWEB)

    Delgado, Paula A.; Brutman, Jacob P.; Masica, Kristina; Molde, Joseph; Wood, Brandon; Hillmyer, Marc A. (UMM)

    2016-10-26

    We report that the brittle nature and low-heat distortion resistance of a promising biorenewable thermoplastics, poly((₋)-lactide) (PLA), motivate the investigation of strengthening additives that can address these deficiencies. Here in our work, a high surface area carbon black (BP-2000) as well as biobased carbon blacks (hydrochars) were examined as reinforcement agents for PLA. When 1–5 wt % BP-2000 was added to PLA, the crystallization of PLA was accelerated, resulting in higher crystallinity, tensile strength, and heat resistance. A thermal creep experiment revealed that the composites exhibited no significant deformation after 30 min with 2 N of uniaxial tensile force at 80°C (above the Tg), whereas neat PLA (with similar thermal history) elongated to 79% after 5 min under the same conditions. PLA–hydrochar composites demonstrated similar brittle behavior to neat PLA. Finally, despite the promising nucleating ability of hydrochars, they displayed low interfacial adhesion with PLA because of their low surface area, resulting in poor energy transfer on stretching

  13. Water surface area and depth determine oviposition choice in Aedes albopictus (Diptera: Culicidae).

    Science.gov (United States)

    Reiskind, Michael H; Zarrabi, Ali A

    2012-01-01

    Oviposition choice is a well-studied aspect of the mosquito life cycle, and offers a potential avenue for species-specific surveillance and control. In container inhabiting mosquitoes, there has been a focus on how the components of the aquatic media determine choice, with little work on the physical characteristics of the containers themselves. We performed five experiments examining the effect of physical container parameters on oviposition choice by Aedes albopictus. We examined containers of three different surface areas (small, 496 cm2; medium, 863 cm2; and large, 1,938 cm2) at the same water depth and the same or different heights in a series of binary choice assays. We also examined different depths with the same surface area in clear containers (where the depth may be perceived by the darkness of the water) and in opaque containers, which appear uniformly dark at different depths. We found a significant preference for medium containers over large containers, whether the containers were different or the same heights, and a trend toward a preference for small containers over medium containers. There was a preference for deeper water regardless of whether containers were clear or opaque. These behaviors suggest mosquitoes take into account physical aspects of their habitats and their oviposition choices are consistent with minimizing the risk of habitat drying.

  14. The specific surface area of methane hydrate formed in different conditions and manners

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The specific surface area of methane hydrates, formed both in the presence and absence of sodium dodecyl sulfate (SDS) and processed in different manners (stirring, compacting, holding the hydrates at the formation conditions for different periods of time, cooling the hydrates for different periods of time before depressurizing them), was measured under atmospheric pressure and temperatures below ice point. It was found that the specific surface area of hydrate increased with the decreasing temperature. The methane hydrate in the presence of SDS was shown to be of bigger specific surface areas than pure methane hydrates. The experimental results further demonstrated that the manners of forming and processing hydrates affected the specific surface area of hydrate samples. Stirring or compacting made the hydrate become finer and led to a bigger specific surface area.

  15. Preparation and Characterization of Porous Yttrium Oxide Powders with High Specific Surface Area

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The porous cubic yttrium oxides with high specific surface area were prepared by the explosive decomposition of yttrium nitrate and its complex formed with methyl salicylate. The specific surface area and properties of powders synthesized at various temperatures were characterized using BET, X-ray diffraction (XRD), infrared spectra (IR), and scanning electron microscopy (SEM). The results indicate that the highest specific surface area is found to be 65.37 m2*g-1 at the calcination temperature of 600 ℃, and then decreases to 20.33 m2*g-1 with the calcination temperature rising from 600 to 900 ℃. The powders show strong surface activity for adsorping water and carbon dioxide in air, which also decreases with the rising calcination temperature. The drop both on the surface area and surface activity of samples at higher temperatures may be due to pore-narrowing(sintering) effects.

  16. A method for increasing the surface area of perovskite-type oxides

    Indian Academy of Sciences (India)

    S Banerjee; V R Choudhary

    2000-10-01

    A method based on hydrothermal treatments is described for increasing the surface area of sintered ABO3-type perovskite oxides. Influence of hydrothermal treatments, such as water treatment at 125-300°C under autogeneous pressure and steam treatment at 350-800°C, to low surface area (or sintered) LaCoO3 and LaMnO3 perovskite oxides on their surface properties (viz. surface area, crystal size and morphology and surface La/(Co or Mn) ratio) and also catalytic activity in complete combustion of methane at different temperatures (450-600°C) has been thoroughly investigated. The hydrothermal treatments result in the activation of the perovskite oxides by increasing their surface area very markedly.

  17. Surface and subsurface conditions in permafrost areas - a literature review

    Energy Technology Data Exchange (ETDEWEB)

    Vidstrand, Patrik [Bergab, Goeteborg (Sweden)

    2003-02-01

    This report contains a summary of some of the information within existing technical and scientific literature on permafrost. Permafrost is viewed as one of the future climate driven process domains that may exist in Scandinavia, and that may give rise to significantly different surface and subsurface conditions than the present. Except for changes in the biosphere, permafrost may impact hydraulic, mechanical, and chemical subsurface processes and conditions. Permafrost and its influences on the subsurface conditions are thus of interest for the performance and safety assessments of deep geological waste repositories. The definition of permafrost is 'ground that stays at or below 0 deg C for at least two consecutive years'. Permafrost will effect the geological subsurface to some depth. How deep the permafrost may grow is a function of the heat balance, thermal conditions at the surface and within the ground, and the geothermal heat flux from the Earth's inner parts. The main chapters of the report summaries the knowledge on permafrost evolution, occurrence and distribution, and extracts information concerning hydrology and mechanical and chemical impacts due to permafrost related conditions. The results of a literature review are always dependent on the available literature. Concerning permafrost there is some literature available from investigations in the field of long-term repositories and some from mining industries. However, reports of these investigations are few and the bulk of permafrost literature comes from the science departments concerned with surficial processes (e.g. geomorphology, hydrology, agriculture, etc) and from engineering concerns, such as foundation of constructions and pipeline design. This focus within the permafrost research inevitably yields a biased but also an abundant amount of information on localised surficial processes and a limited amount on regional and deep permafrost characteristics. Possible conclusions are that

  18. Improved analytic methods for coal surface area and pore size distribution determination using 77 K nitrogen adsorption experiment

    Institute of Scientific and Technical Information of China (English)

    Wang Gongda; Wang Kai; Ren Tingxiang

    2014-01-01

    77 K nitrogen adsorption was the most widely used technique for determining surface area and pore size distribution of coal. Brunauer-Emmett-Teller (BET) and Barrett-Joyner-Halenda (BJH) model are com-monly used analytic methods for adsorption/desorption isotherm. A Chinese anthracite coal is tested in this study using an improved experimental method and adsorption isotherm analyzed by three adsorp-tion mechanisms at different relative pressure stages. The result shows that the micropore filling adsorp-tion predominates at the relative pressure stage from 6.8E?7 to 9E?3. Theoretically, BET and BJH model are not appropriate for analyzing coal samples which contain micropores. Two new analytic procedures for coal surface area and pore size distribution calculation are developed in this work. The results show that BET model underestimates surface area, and micropores smaller than 1.751 nm account for 35.5%of the total pore volume and 74.2%of the total surface area. The investigation of surface area and pore size distribution by incorporating the influence of micropore is significant for understanding adsorption mechanism of methane and carbon dioxide in coal.

  19. Characterization of the intragranular water regime within subsurface sediments: Pore volume, surface area, and mass transfer limitations

    Science.gov (United States)

    Hay, Michael B.; Stoliker, Deborah L.; Davis, James A.; Zachara, John M.

    2011-10-01

    Although "intragranular" pore space within grain aggregates, grain fractures, and mineral surface coatings may contain a relatively small fraction of the total porosity within a porous medium, it often contains a significant fraction of the reactive surface area, and can thus strongly affect the transport of sorbing solutes. In this work, we demonstrate a batch experiment procedure using tritiated water as a high-resolution diffusive tracer to characterize the intragranular pore space. The method was tested using uranium-contaminated sediments from the vadose and capillary fringe zones beneath the former 300A process ponds at the Hanford site (Washington). Sediments were contacted with tracers in artificial groundwater, followed by a replacement of bulk solution with tracer-free groundwater and the monitoring of tracer release. From these data, intragranular pore volumes were calculated and mass transfer rates were quantified using a multirate first-order mass transfer model. Tritium-hydrogen exchange on surface hydroxyls was accounted for by conducting additional tracer experiments on sediment that was vacuum dried after reaction. The complementary ("wet" and "dry") techniques allowed for the simultaneous determination of intragranular porosity and surface area using tritium. The Hanford 300A samples exhibited intragranular pore volumes of ˜1% of the solid volume and intragranular surface areas of ˜20%-35% of the total surface area. Analogous experiments using bromide ion as a tracer yielded very different results, suggesting very little penetration of bromide into the intragranular porosity.

  20. Characterization of the intragranular water regime within subsurface sediments: pore volume, surface area, and mass transfer limitations

    Science.gov (United States)

    Hay, Michael B.; Stoliker, Deborah L.; Davis, James A.; Zachara, John M.

    2011-01-01

    Although "intragranular" pore space within grain aggregates, grain fractures, and mineral surface coatings may contain a relatively small fraction of the total porosity within a porous medium, it often contains a significant fraction of the reactive surface area, and can thus strongly affect the transport of sorbing solutes. In this work, we demonstrate a batch experiment procedure using tritiated water as a high-resolution diffusive tracer to characterize the intragranular pore space. The method was tested using uranium-contaminated sediments from the vadose and capillary fringe zones beneath the former 300A process ponds at the Hanford site (Washington). Sediments were contacted with tracers in artificial groundwater, followed by a replacement of bulk solution with tracer-free groundwater and the monitoring of tracer release. From these data, intragranular pore volumes were calculated and mass transfer rates were quantified using a multirate first-order mass transfer model. Tritium-hydrogen exchange on surface hydroxyls was accounted for by conducting additional tracer experiments on sediment that was vacuum dried after reaction. The complementary ("wet" and "dry") techniques allowed for the simultaneous determination of intragranular porosity and surface area using tritium. The Hanford 300A samples exhibited intragranular pore volumes of ~1% of the solid volume and intragranular surface areas of ~20%–35% of the total surface area. Analogous experiments using bromide ion as a tracer yielded very different results, suggesting very little penetration of bromide into the intragranular porosity.

  1. CFD SIMULATION OF AIR ION REGIME IN WORK AREAS AT CONDITION OF ARTIFICIAL AIR IONIZATION

    Directory of Open Access Journals (Sweden)

    M. M. Biliaiev

    2016-02-01

    Full Text Available Purpose. The paper supposes creation of a CFD model for calculating the air ion regime in the premises and in work areas at artificial ionization of the air by the ionizer installation indoors with considering the most important physical factors that influence the formation of ions concentration field. Methodology. The proposed CFD model for calculation of the air ion regime in work areas at artificial ionization of the air by installing ionizer indoors is based on the application of aerodynamics, electrostatics and mass transfer equations. The mass transfer equation takes into account the interaction of different polarities of ions with each other and with the dust particles. The calculation of air flow rate in the room is realized on the basis of the potential flow model by using the Laplace equation for the stream function. Poisson equation for the electric potential is used for calculation of the charged particles drift in an electric field. At the simulation to take into account: 1 influence of the working area geometric characteristics; 2 location of the ventilation holes; 3 placement of furniture and equipment; 4 ventilation regime in the room; 5 presence of obstacles on the ions dispersion process; 6 specific location of dust particles emission and ions of different polarity, and their interaction in the room and in the working zones. Findings. The developed CFD model allows determining the concentration of negative ions in the room and in the area of the human respiratory organs. The distribution of the negative ions concentration is presented in the form of concentration field isolines. Originality. The 2D CFD model for calculating the air ion regime in working areas, providing the ability to determine the ions concentration in a given place in the room was created. The proposed model is developed taking into account: placement of furniture and equipment in the room; geometric characteristics of the room; location of dust emissions

  2. How to understand architectural quality when working with social housing areas

    DEFF Research Database (Denmark)

    Jensen, Kirstine Brøgger

    2015-01-01

    This paper debates how to understand architectural quality when working with social housing areas. The concept is discussed through three approaches: 1) Social housing is debated in relation to societal and historical contributions. 2) Well known definitions (from the old-timer Vitruvius...... to the current sustainability agenda) are outlined according to their pros´n cons when working with social housing areas. 3) On the ground of interviews with practitioners the everyday use and understanding of the concept is scrutinized In this vein the paper agitates that architectural quality in social housing...... areas has to be understood in relation to the everyday life, and that a workable concept should emphasize what architecture does over what it is. The paper is a piece to the puzzle of the PhD-project “Living Spaces and Everyday Places...

  3. Three-year changes of surface albedo of degraded grassland and cropland surfaces in a semiarid area

    Institute of Scientific and Technical Information of China (English)

    LIU HuiZhi; TU Gang; DONG WenJie

    2008-01-01

    Diurnal, seasonal and interannual variations of surface albedo of degraded grassland and cropland surfaces at a semiarid area of Tognyu have been investigated based on the continuous three years observational data from 2003 to 2005. The changes of surface albedo with solar elevation angle and soil moisture have been discussed also. It has been found that surface albedo has almost the same diurnal and seasonal variations on degraded grassland and cropland surfaces in the semiarid area, while sur-face albedo is large in winter and small in summer. The diurnal variation of the surface albedo has re-lationship with the weather condition. The diurnal cycle of the surface albedo likes the "U" shape curve in sunny day, while it is low-high after the rain, and high-low after the snow. The surface albedo has large variation in cloudy day, while it has no any variation in overcast day. The large difference of the surface albedo can be 0.04 in winter between two land surfaces, because the snow has large effects on the surface albedo in winter. The rainfall is an important factor in summer on the surface albedo, while the difference of the surface albedo is 0.01 only between two land surfaces. The differences of the surface aibedo can also be 0.04 in autumn due to vegetation growing. The seasonal-average surface albeo from 2003-2005 is 0.25, 0.22, 0.24, 0.32 respectively in spring, summer, autumn and winter on the degraded grassland surface, while it is 0.25, 0.21,0.22, 0.33 respectively in spring, summer, autumn and winter on the cropland surface. The surface albedo becomes smaller with the increase of solar elevation angle. When the solar elevation angle is greater than 40°, the surface albedo changes very little and tends to be a constant. The surface albedo has negative exponent functions with soil moisture in the growing season.

  4. Long-term studies on the effects of nonvolatile organic compounds on porous media surface areas.

    Science.gov (United States)

    Khachikian, Crist S; Harmon, Thomas C

    2002-01-01

    This paper investigates the long-term behavior of porous media contaminated by nonvolatile organic compounds (NVOC) in terms of specific interfacial surface area. Specifically, a natural sand, Moffett sand (MS), was contaminated with naphthalene and the surface area was measured repeatedly over time using nitrogen adsorption-desorption techniques. A field-contaminated sand affected by lamp-black material (LB) from former manufactured gas plant operations was also studied. Lampblack is a carbonaceous skeleton containing polycyclic aromatic hydrocarbons (PAHs) and other hydrocarbons. It is hypothesized that soils contaminated by these types of chemicals will exhibit significantly less surface area than their clean counterparts. The surface areas for the contaminated MS samples increased toward their clean-MS values during the 700-h aging period, but achieved the clean values only after pentane extraction or heating at 60 degrees C. Heating at 50 degrees C failed to achieve a similar recovery of the clean-MS surface area value. Nonspecific mass loss tracked the increase in surface area as indirect evidence that naphthalene loss was the cause of the surface area increase. For the LB samples, aging at 100 degrees C produced a slight decrease in surface area and mass while aging at 250 degrees C caused the surface area to increase roughly threefold while the mass decreased by approximately 1%. These results suggest that, under moderate heating and over the time scale of this investigation, there is a redistribution of the complex contaminant mixture on the solid matrix. Greater temperatures remove mass more efficiently and therefore exhibited the surface area increase expected in this experiment.

  5. Environmental and geochemical assessment of surface sediments on irshansk ilmenite deposit area

    Directory of Open Access Journals (Sweden)

    Наталия Олеговна Крюченко

    2015-03-01

    Full Text Available It is revealed the problem of pollution of surface sediments of Irshansk ilmenite deposit area of various chemical elements hazard class (Mn, V, Ba, Ni, Co, Cr, Mo, Cu, Pb, Zn. It is determined its average content in surface sediments of various functional areas (forest and agricultural land, flood deposits, reclaimed land, calculated geochemical criteria, so given ecological and geochemical assessment of area

  6. Opinions of South African optometry students about working in rural areas after graduation

    Directory of Open Access Journals (Sweden)

    Khathutshelo P. Mashige

    2015-02-01

    Full Text Available Background: Eye and vision problems have been reported to be more prevalent in rural than urban areas; and a large proportion of South Africans live in the rural areas.Aim: To investigate the opinions of South African optometry students about working in rural areas after completion of their training and to identify factors that may influence theirdecisions.Method: This was a cross-sectional quantitative study using a survey instrument containing both closed and open-ended, semi-structured questions.Results: Four hundred and thirty-eight students responded to the questionnaire (85.4% response rate. Overall, many of the respondents did not want to open their first (66% or second practices (64.6% in the rural areas. However, most respondents from rural backgrounds reported that they would open their first (77.2% or second (79.4% practice in the rural areas. The main reasons cited by the respondents for their unwillingness to work in the rural areaswere financial concerns (81.2%, personal safety (80.1% and poor living conditions (75.3%, with a significantly higher number (p < 0.05 being from urban respondents for the latter twoissues only.Conclusion: Many students were not in favour of opening practices in rural areas, but were willing to work for the government or a non-governmental organisation after graduation. Efforts should be made to address financial incentives, safety and living conditions in the rural areas. The results of this study have implications for the future of availability and accessibility of eye care services to those living in the rural and remoteareas of the country.

  7. Characterization of pigment-leached antifouling coatings using BET surface area measurements and mercury porosimetry

    DEFF Research Database (Denmark)

    Kiil, Søren; Dam-Johansen, Kim

    2007-01-01

    In this work BET surface area measurements and mercury porosimetry are used to characterize leached layers formed when seawater-soluble pigments (Cu2O and ZnO) dissolve during accelerated leaching of simple antifouling coatings. Measurements on single-pigment coatings show that an increasing...... fraction of Cu2O or ZnO pigment particles becomes unavailable for dissolution when the concentration of the pigment decreases in the coating and the interparticle distance in the binder matrix becomes larger. Experimental data for a coating initially containing a mixture of Cu2O and TiO2 pigments suggest...... that a substantial fraction of the smaller and inert TiO2 particles may be lost from the coating upon dissolution of the larger Cu2O particles. This inert particle translocation effect is important to take into account when interpreting polishing and leaching data and when developing mathematical models...

  8. Localized surface plasmon resonance biosensing with large area of gold nanoholes fabricated by nanosphere lithography.

    Science.gov (United States)

    Xiang, Gansheng; Zhang, Nan; Zhou, Xiaodong

    2010-03-09

    Localized surface plasmon resonance (LSPR) has been extensively studied as potential chemical and biological sensing platform due to its high sensitivity to local refractive index change induced by molecule adsorbate. Previous experiments have demonstrated the LSPR generated by gold nanoholes and its biosensing. Here, we realize large uniform area of nanoholes on scale of cm2 on glass substrate by nanosphere lithography which is essential for mass production. The morphology of the nanoholes is characterized using scanning electron microscope and atomic force microscope. The LSPR sensitivity of the nanoholes to local refractive index is measured to be 36 nm/RIU. However, the chip has demonstrated high sensitivity and specificity in biosensing: bovine serum albumin adsorption is detected with LSPR peak redshift of 27 nm, and biotin-streptavidin immunoassay renders a LSPR redshift of 11 nm. This work forms a foundation toward the cost-effective, high-throughput, reliable and robust chip-based LSPR biosensor.

  9. Localized Surface Plasmon Resonance Biosensing with Large Area of Gold Nanoholes Fabricated by Nanosphere Lithography

    Directory of Open Access Journals (Sweden)

    Zhang Nan

    2010-01-01

    Full Text Available Abstract Localized surface plasmon resonance (LSPR has been extensively studied as potential chemical and biological sensing platform due to its high sensitivity to local refractive index change induced by molecule adsorbate. Previous experiments have demonstrated the LSPR generated by gold nanoholes and its biosensing. Here, we realize large uniform area of nanoholes on scale of cm2 on glass substrate by nanosphere lithography which is essential for mass production. The morphology of the nanoholes is characterized using scanning electron microscope and atomic force microscope. The LSPR sensitivity of the nanoholes to local refractive index is measured to be 36 nm/RIU. However, the chip has demonstrated high sensitivity and specificity in biosensing: bovine serum albumin adsorption is detected with LSPR peak redshift of 27 nm, and biotin-streptavidin immunoassay renders a LSPR redshift of 11 nm. This work forms a foundation toward the cost-effective, high-throughput, reliable and robust chip-based LSPR biosensor.

  10. Design and stabilisation of a high area iron molybdate surface for the selective oxidation of methanol to formaldehyde.

    Science.gov (United States)

    Chapman, Stephanie; Brookes, Catherine; Bowker, Michael; Gibson, Emma K; Wells, Peter P

    2016-07-04

    The performance of Mo-enriched, bulk ferric molybdate, employed commercially for the industrially important reaction of the selective oxidation of methanol to formaldehyde, is limited by a low surface area, typically 5-8 m(2) g(-1). Recent advances in the understanding of the iron molybdate catalyst have focused on the study of MoOx@Fe2O3 (MoOx shell, Fe2O3 core) systems, where only a few overlayers of Mo are present on the surface. This method of preparing MoOx@Fe2O3 catalysts was shown to support an iron molybdate surface of higher surface area than the industrially-favoured bulk phase. In this research, a MoOx@Fe2O3 catalyst of even higher surface area was stabilised by modifying a haematite support containing 5 wt% Al dopant. The addition of Al was an important factor for stabilising the haematite surface area and resulted in an iron molybdate surface area of ∼35 m(2) g(-1), around a 5 fold increase on the bulk catalyst. XPS confirmed Mo surface-enrichment, whilst Mo XANES resolved an amorphous MoOx surface monolayer supported on a sublayer of Fe2(MoO4)3 that became increasingly extensive with initial Mo surface loading. The high surface area MoOx@Fe2O3 catalyst proved amenable to bulk characterisation techniques; contributions from Fe2(MoO4)3 were detectable by Raman, XAFS, ATR-IR and XRD spectroscopies. The temperature-programmed pulsed flow reaction of methanol showed that this novel, high surface area catalyst (3ML-HSA) outperformed the undoped analogue (3ML-ISA), and a peak yield of 94% formaldehyde was obtained at ∼40 °C below that for the bulk Fe2(MoO4)3 phase. This work demonstrates how core-shell, multi-component oxides offer new routes for improving catalytic performance and understanding catalytic activity.

  11. Siloxanes removal from biogas by high surface area adsorbents.

    Science.gov (United States)

    Gislon, P; Galli, S; Monteleone, G

    2013-12-01

    Biogas utilized for energy production needs to be free from organic silicon compounds, as their burning has damaging effects on turbines and engines; organic silicon compounds in the form of siloxanes can be found in biogas produced from urban wastes, due to their massive industrial use in synthetic product, such as cosmetics, detergents and paints. Siloxanes removal from biogas can be carried out by various methods (Mona, 2009; Ajhar et al., 2010 May; Schweigkofler and Niessner, 2001); aim of the present work is to find a single practical and economic way to drastically and simultaneously reduce both the hydrogen sulphide and the siloxanes concentration to less than 1 ppm. Some commercial activated carbons previously selected (Monteleone et al., 2011) as being effective in hydrogen sulfide up taking have been tested in an adsorption measurement apparatus, by flowing the most volatile siloxane (hexamethyldisiloxane or L2) in a nitrogen stream, typically 100-200 ppm L2 over N2, through an activated carbon powder bed; the adsorption process was analyzed by varying some experimental parameters (concentration, grain size, bed height). The best activated carbon shows an adsorption capacity of 0.1g L2 per gram of carbon. The next thermogravimetric analysis (TGA) confirms the capacity data obtained experimentally by the breakthrough curve tests. The capacity results depend on L2 concentration. A regenerative carbon process is then carried out by heating the carbon bed up to 200 °C and flushing out the adsorbed L2 samples in a nitrogen stream in a three step heating procedure up to 200 °C. The adsorption capacity is observed to degrade after cycling the samples through several adsorption-desorption cycles. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. Changes in the Surface Area of Glaciers in Northern Eurasia

    Science.gov (United States)

    Khromova, T.; Nosenko, G.

    2012-12-01

    Glaciers are widely recognized as key indicators of climate change. Recent evidence suggests an acceleration of glacier mass loss in several key mountain regions. Glacier recession implies the landscape changes in the glacial zone, origin of new lakes and activation of natural disaster processes, catastrophic mudflows, ice avalanches, outburst floods, and etc. The presence of glaciers in itself threats to human life, economic activity and growing infrastructure. Economical and recreational human activity in mountain regions requires relevant information on snow and ice objects. Absence or inadequacy of such information results in financial and human losses. A more comprehensive evaluation of glacier changes is imperative to assess ice contributions to global sea level rise and the future of water resources from glacial basins. One of the urgent steps is a full inventory of all ice bodies, their volume and changes The first estimation of glaciers state and glaciers distribution in the big part of Northern Eurasia has been done in the USSR Glacier Inventory published in 1966 -1980 as a part of IHD activity. The Inventory is based on topographic maps and air photos and reflects the status of the glaciers in 1957-1970y. There is information about 23796 glaciers with area of 78222.3 km2 in the Inventory. It covers 23 glacier systems on Northern Eurasia. In the 80th the USSR Glacier Inventory has been transformed in the digital form as a part of the World Glacier Inventory. Recent satellite data provide a unique opportunity to look again at these glaciers and to evaluate changes in glacier extent for the second part of XX century. In the paper we report about 15 000 glaciers outlines for Caucasus, Pamir, Tien-Shan, Altai, Syntar-Khayata, Cherskogo Range, Kamchatka and Russian Arctic which have been derived from ASTER and Landsat imagery and could be used for glacier changes evaluation. The results show that glaciers are retreating in all these regions. There is, however

  13. Study of the nitric acid influence on the production of Ce O{sub 2} with high specific surface area; Estudo da influencia do acido nitrico na obtencao de CeO{sub 2} com alta area superficial especifica

    Energy Technology Data Exchange (ETDEWEB)

    Albanez, Nelma Kunrath; Bressiani, Jose Carlos [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

    1996-12-31

    The cerium oxide (Ce O{sub 2}) main characteristics for use as catalyst in an exhaust gases purification system are: high specific surface area (approximately 30 m{sup 2}/g after calcination at 800 deg C/ 2 hs), and thermal stability. The Ce O{sub 2} powders obtained by conventional route, i.e., precipitation, and submitted high temperature (800 deg C) heat treatments, showed low specific surface area. In this work nitric acid effects on the Ce O{sub 2} surface area values were investigated. The variables studied were nitric acid concentration, humidity content in the raw material, re pulp after leaching, addition of hydrogen peroxide (H{sub 2} O{sub 2}) and starting material specific surface area. By this process, it was possible to obtain powders with specific surface area larger than 40 m{sup 2}/g, after treatment at 800 deg C during two hours. (author) 8 refs., 3 figs., 1 tab.

  14. Surface Soil Preparetion for Leguminous Plants Growing in Degraded Areas by Mining Located in Amazon Forest-Brazil

    Science.gov (United States)

    Irio Ribeiro, Admilson; Hashimoto Fengler, Felipe; Araújo de Medeiros, Gerson; Márcia Longo, Regina; Frederici de Mello, Giovanna; José de Melo, Wanderley

    2015-04-01

    The revegetation of areas degraded by mining usually requires adequate mobilization of surface soil for the development of the species to be implemented. Unlike the traditional tillage, which has periodicity, the mobilization of degraded areas for revegetation can only occur at the beginning of the recovery stage. In this sense, the process of revegetation has as purpose the establishment of local native vegetation with least possible use of inputs and superficial tillage in order to catalyze the process of natural ecological succession, promoting the reintegration of areas and minimizing the negative impacts of mining activities in environmental. In this context, this work describes part of a study of land reclamation by tin exploitation in the Amazon ecosystem in the National Forest Jamari- Rondonia Brazil. So, studied the influence of surface soil mobilization in pit mine areas and tailings a view to the implementation of legumes. The results show that the surface has areas of mobilizing a significant effect on the growth of leguminous plants, areas for both mining and to tailings and pit mine areas.

  15. Incidence of stress on top management and its impact upon health and work area

    Directory of Open Access Journals (Sweden)

    Dana Maria Staňková

    2009-01-01

    Full Text Available Within the frame of this paper the key theoretical knowledge to the selected topic is described, the presentation of partial results and discussion on the issue of the psychological aspects of managerial work, focusing on stress and its manifestations are submitted. The aim of this research was to identify the most frequent stress symptoms in the physiological, emotional and behavioral field and to define the main factors which cause them in work and private life terms. For the purpose of this research of stress effects on health area a questionnaire technology of our own design was chosen. For a deeper understanding of sources of an increased psychological stress in managerial activities a technique of interviews with the top managers was used. Research investigation has showed the action of stress on the senior managers, particularly increased during the current economic recession. The most significant signs of stress are manifested in physiological area, especially by fatigue, headache, digestion problems and sleep disturbances, as in the emotional area by anxiety, excessive concern and overall irritability. At the same time stress impacts also the behavioral area, where it has a negative impact to the work and family life. In the course of processing this subject, an absolutely obvious need occurred for a deeper processing of this large area of work stress, which will be subsequently dealing with, and whose output will be, the methodology of anti-stress strategy for HR (Human Resources managers and Senior Executives of companies to prevent stress, promote health and quality of living conditions in the workplace.

  16. Surface chemical properties of novel high surface area solids synthesized from coal fly ash

    CSIR Research Space (South Africa)

    Pretorius, PJ

    2003-07-23

    Full Text Available to the presence of =AlOH- and =SiOH-type surface groups. Surface protonation constants for the various solids (unmodified ash, base-modified ash, and acid-etched zeolitic product) are reported. Metal sorption studies were performed for cadmium and copper...

  17. Detailed first-principles studies on surface energy and work function of hexagonal metals

    Science.gov (United States)

    Ji, De-Peng; Zhu, Quanxi; Wang, Shao-Qing

    2016-09-01

    The surface energies and work functions for ten kinds of Miller-indices surfaces of hexagonal metals, Be, Mg, Tc, Re, Ru, and Os are calculated by means of the density functional theory (DFT) method. The results show that the metals belonging to the same group have a very similar rule in work functions and surface energies. The work functions of (0001), (01 1 - 1)" separators=",, and (10 1 - 0)" separators=", surfaces are generally larger than the work functions of (11 2 - 1)" separators=",, (11 2 - 2)" separators=",, (11 2 - 3)" separators=",, and (31 4 - 0)" separators=", surfaces. In contrast to work functions, there is more regularity in the crystallographic orientation dependence of surface energies. However, for the metals belonging to different groups, there are always some differences in the exact order of orientation dependence. It is also shown that the work functions and surface energies of the main group metals decrease as they go from top to the bottom in the same group of periodic table, while for the transition metals, they do not always obey this rule.

  18. Estimating the surface area of non-convex particles from central planar sections

    DEFF Research Database (Denmark)

    Thórisdóttir, Ólöf; H.Rafati, Ali; Kiderlen, Markus

    . In this section plane a modification of the area tangent count method is used. The Morse type estimator generalizes Cruz-Orive's pivotal estimator for convex objects to non-convex objects. The advantages of the Morse type estimator over existing local surface area estimators are illustrated in a simulation study......In this paper, we present a new surface area estimator in local stereology. This new estimator is called the 'Morse type surface area estimator' and is obtained using a two-stage sampling procedure. First a plane section through a fixed reference point of a three-dimensional structure is taken....... The Morse type estimator is well suited for computer assisted confocal microscopy and we demonstrate its practicability in a biological application: the surface area estimation of the nuclei of giant-cell glioblastoma from microscopy images. We also present an interactive software that allows the user...

  19. On the relationship between enamel band complexity and occlusal surface area in Equids (Mammalia, Perissodactyla

    Directory of Open Access Journals (Sweden)

    Nicholas A. Famoso

    2016-07-01

    Full Text Available Enamel patterns on the occlusal surfaces of equid teeth are asserted to have tribal-level differences. The most notable example compares the Equini and Hipparionini, where Equini have higher crowned teeth with less enamel-band complexity and less total occlusal enamel than Hipparionini. Whereas previous work has successfully quantified differences in enamel band shape by dividing the length of enamel band by the square root of the occlusal surface area (Occlusal Enamel Index, OEI, it was clear that OEI only partially removes the effect of body size. Because enamel band length scales allometrically, body size still has an influence on OEI, with larger individuals having relatively longer enamel bands than smaller individuals. Fractal dimensionality (D can be scaled to any level, so we have used it to quantify occlusal enamel complexity in a way that allows us to get at an accurate representation of the relationship between complexity and body size. To test the hypothesis of tribal-level complexity differences between Equini and Hipparionini, we digitally traced a sample of 98 teeth, one tooth per individual; 31 Hipparionini and 67 Equini. We restricted our sampling to the P3-M2 to reduce the effect of tooth position. After calculating the D of these teeth with the fractal box method which uses the number of boxes of various sizes to calculate the D of a line, we performed a t-test on the individual values of D for each specimen, comparing the means between the two tribes, and a phylogenetically informed generalized least squares regression (PGLS for each tribe with occlusal surface area as the independent variable and D as the dependent variable. The slopes of both PGLS analyses were compared using a t-test to determine if the same linear relationship existed between the two tribes. The t-test between tribes was significant (p < 0.0001, suggesting different D populations for each lineage. The PGLS for Hipparionini was a positive but not

  20. Models for evolution of reactive surface area during dissolution and precipitation

    Science.gov (United States)

    Pedersen, Janne; Jettestuen, Espen; Hildebrand-Habel, Tania; Vinningland, Jan Ludvig; Vadla Madland, Merete; Korsnes, Reidar Inge; Hiorth, Aksel

    2014-05-01

    During water flooding of a reservoir, minerals can dissolve and/or precipitate if the injected water is out of equilibrium with the formation. A net mass transfer between solid and fluid will result in a dynamically changing pore space, which in turn may change the permeability and/or the porosity of the reservoir. When secondary minerals precipitate from solution they will form on top of the primary minerals on the pore walls, and hence the reactive surface area of the individual minerals constituting the porous medium will change. This will in turn affect the dissolution/precipitation rates. In this work we study three different models for the evolution of reactive surface areas during flooding of a core with a brine that is in disequilibrium with the rock. The three models differ in the way secondary minerals are distributed on the solid surface: In model I the whole surface area of both primary and secondary minerals is reactive; hence there will be no screening effect when secondary minerals form. In model II secondary minerals form as a monolayer on the primary minerals that will screen primary minerals from the flow. Model I and II represent two extremes regarding the screening effect; namely no screening (model I) and full screening (model II). Model III is motivated from observations of unflooded and flooded chalk using scanning electron microscopy (SEM). In this model secondary minerals are assumed to form preferentially near crystal defects, being e.g. dislocations in crystallographic pattern or grain contacts. Also the rate of precipitation for forming minerals varies for precipitation onto primary (dissimilar) minerals and precipitation onto secondary (similar) minerals. The three models are implemented into a lattice Boltzmann (LB) based geochemical simulator, and simulation results are compared to results from a 3 years long core flooding experiment with outcrop chalk flooded with 0.219M MgCl2 at 130°C, as well as SEM studies. Before flooding 98wt

  1. Assessment of heavy metal levels in surface sediments of estuaries and adjacent coastal areas in China

    Science.gov (United States)

    Liu, Xianbin; Li, Deliang; Song, Guisheng

    2017-03-01

    This article investigates the variations of contamination levels of heavy metals such as copper, lead, chromium, cadmium, zinc, arsenic, and mercury over time in surface sediments of the Changjiang River Estuary (CRE), Yellow River Estuary (YRE), Pearl River Estuary (PRE), and their adjacent coastal areas in China. The contamination factor (CF), pollution load index (PLI), and geoaccumulation index ( I geo) are used to evaluate the quality of the surface sediments in the study areas. The results showed that the CRE, YRE, and their adjacent coastal areas were at a low risk of contamination in terms of heavy metals, while the PRE and its adjacent coastal area were at a moderate level. By comparison, the concentrations of heavy metals in the surface sediments of the YRE and its adjacent coastal area were relatively lower than those in the CRE, PRE, and their adjacent coastal areas.

  2. Specific Surface versus Electrochemically Active Area of the Carbon/Polypyrrole Capacitor: Correlation of Ion Dynamics Studied by an Electrochemical Quartz Crystal Microbalance with BET Surface.

    Science.gov (United States)

    Mosch, Heike L K S; Akintola, Oluseun; Plass, Winfried; Höppener, Stephanie; Schubert, Ulrich S; Ignaszak, Anna

    2016-05-10

    Carbon/polypyrrole (PPy) composites are promising electrode materials for energy storage applications such as lightweight capacitors. Although these materials are composed of relatively inexpensive components, there is a gap of knowledge regarding the correlation between surface, porosity, ion exchange dynamics, and the interplay of the double layer capacitance and pseudocapacitance. In this work we evaluate the specific surface area analyzed by the BET method and the area accessible for ions using electrochemical quartz-crystal microbalance (EQCM) for SWCNT/PPy and carbon black Vulcan XC72-R/PPy composites. The study revealed that the polymer has significant influence on the pore size of the composites. Although the BET surface is low for the polypyrrole, the electrode mass change and thus the electrochemical area are large for the polymer-containing electrodes. This indicates that multiple redox active centers in the charged polymer chain are good ion scavengers. Also, for the composite electrodes, the effective charge storage occurs at the polypyrrole-carbon junctions, which are easy to design/multiply by a proper carbon-to-polymer weight ratio. The specific BET surface and electrochemically accessible surface area are both important parameters in calculation of the electrode capacitance. SWCNTs/PPy showed the highest capacitances normalized to the BET and electrochemical surface as compared to the polymer-carbon black. TEM imaging revealed very homogeneous distribution of the nanosized polymer particles onto the CNTs, which facilitates the synergistic effect of the double layer capacitance (CNTs) and pseudocapacitance (polymer). The trend in the electrode mass change in correlation with the capacitance suggest additional effects such as a solvent co-insertion into the polymer and the contribution of the charge associated with the redox activity of oxygen-containing functional groups on the carbon surface.

  3. Commuting to work: RN travel time to employment in rural and urban areas.

    Science.gov (United States)

    Rosenberg, Marie-Claire; Corcoran, Sean P; Kovner, Christine; Brewer, Carol

    2011-02-01

    To investigate the variation in average daily travel time to work among registered nurses (RNs) living in urban, suburban, and rural areas. We examine how travel time varies across RN characteristics, job setting, and availability of local employment opportunities. Descriptive statistics and linear regression using a 5% sample from the 2000 Census and a longitudinal survey of newly licensed RNs (NLRN). Travel time for NLRN respondents was estimated using geographic information systems (GIS) software. In the NLRN, rural nurses and those living in small towns had significantly longer average commute times. Young married RNs and RNs with children also tended to have longer commute times, as did RNs employed by hospitals. The findings indicate that travel time to work varies significantly across locale types. Further research is needed to understand whether and to what extent lengthy commute times impact RN workforce needs in rural and urban areas.

  4. NOTE TO ASSOCIATED MEMBERS OF THE PERSONNEL ('USERS') WORKING IN CONTROLLED AREAS

    CERN Multimedia

    Medical Service

    2001-01-01

    Associated members of the personnel who have to work in controlled radiation areas or with radioactive sources must be in possession of a dosimeter, to be collected at the Individual Dosimetry Service (24- E-011, tel. 72155, Monday-Friday 8:30-12:00, 14:00-17:00), as well as a recent medical certificate (less than 6 months old). A model of this certificate, as well as the procedures for registration, is available on the Web at the address: http://cern.web.cern.ch/CERN/Divisions/EP/UsersOffice/RegistrationInfo.html This certificate MUST be sent to the CERN Medical Service (FAX=767 92 00) BEFORE beginning work in controlled areas and must be renewed every 24 months.

  5. NOTE TO ASSOCIATED MEMBERS OF THE PERSONNEL ("USERS") WORKING IN CONTROLLED AREAS

    CERN Multimedia

    2003-01-01

    Associated members of the personnel who have to work in controlled radiation areas or with radioactive sources must be in possession of a dosimeter, to be collected at the Individual Dosimetry Service (24- E-011, tel. 72155), as well as a recent medical certificate (less than 6 months old). A model of this certificate, as well as the procedures for registration, is available on the Web at the address: http://cern.web.cern.ch/CERN/Divisions/EP/UsersOffice/RegistrationInfo.html This certificate MUST be sent to the CERN Medical Service (fax 767 92 00) BEFORE beginning work in controlled areas and must be renewed every 24 months. Medical Service Individual Dosimetry Service

  6. Note to associate members of the personnel ("users") working in controlled areas

    CERN Multimedia

    2003-01-01

    Associated members of the personnel who have to work in controlled radiation areas or with radioactive sources must be in possession of a dosimeter, to be collected at the Individual Dosimetry Service (24- E-011, tel. 72155), as well as a recent medical certificate (less than 6 months old). A model of this certificate, as well as the procedures for registration, is available on the Web at the address: http://cern.web.cern.ch/CERN/Divisions/EP/UsersOffice/RegistrationInfo.html This certificate MUST be sent to the CERN Medical Service (fax 767 92 00) BEFORE beginning work in controlled areas and must be renewed every 24 months. Medical Service Individual Dosimetry Service

  7. Radiation risk assessment in professionals working in dental radiology area using buccal micronucleus cytome assay.

    Science.gov (United States)

    Sadatullah, Syed; Dawasaz, Ali Azhar; Luqman, Master; Assiry, Ali A; Almeshari, Ahmed A; Togoo, Rafi Ahmad

    2013-11-01

    The aim of this study was to assess the incidence of micronuclei (MN) in buccal mucosal cells of professionals working in radiology area to determine the risk of stochastic effects of radiation. All the professionals and students working in King Khalid University - College of Dentistry radiology area were included in the Risk Group (RG = 27). The Control Group (CG = 27) comprised of healthy individual matching the gender and age of the RG. Buccal mucosal scraping from all the 54 subjects of RG and CG were stained with Papanicolaou stain and observed under oil immersion lens (×100) for the presence of micronuclei (MN) in the exfoliated epithelial cells. There was no significant difference between the incidence of MN in RG and CG (p = >0.05) using t-test. Routine radiation protection protocol does minimize the risk of radiation induced cytotoxicity, however, screening of professionals should be carried out at regular intervals.

  8. Project Work Plan: Hanford 100-D Area Treatability Demonstration - In Situ Biostimulation for Reducing Barrier

    Energy Technology Data Exchange (ETDEWEB)

    Fruchter, Jonathan S.; Truex, Michael J.; Vermeul, Vince R.; Long, Philip E.

    2006-05-31

    This work plan supports a new, integrated approach to accelerate cleanup of chromium in the Hanford 100 Areas. This new approach will provide supplemental treatment upgradient of the ISRM barrier by directly treating chromium and other oxidizing species in groundwater (i.e., nitrate and dissolved oxygen), thereby increasing the longevity of the ISRM barrier and protecting the ecological receptors and human health at the river boundary.

  9. Effect of dielectric coating on the electron work function and the surface stress of a metal

    Science.gov (United States)

    Babich, A. V.; Pogosov, V. V.

    2009-08-01

    The electron work function, contact potential difference, and surface stress of the elastically deformed faces of the metal covered by a dielectric are calculated by using the Kohn-Sham method and stabilized jellium model. Our calculations demonstrate the opposite deformation dependencies of the work function and contact potential difference. Dielectric coating leads to a negative change in the work function and a positive change in the contact potential difference. It is shown that the measurements of the contact potential difference of a deformed face by the Kelvin method give only the change in the value of the one-electron effective potential in the plane of a virtual image behind the surface, rather than the value of the electron work function. The obtained values of the electron work function and surface stress for Al, Au, Cu, and Zn are in agreement with the results of experiments for polycrystals.

  10. Relationship between Mineral Soil Surface Area and the Biological Degradation of Biosolids Added to Soil

    Directory of Open Access Journals (Sweden)

    Dongqi Wen

    2015-12-01

    Full Text Available Geochemical and biological processes that operate in the soil matrix and on the soil surface are important to the degradation of biosolids in soil. Due to the large surface area of soils it is assumed that the microbial ecology is associated with mineral soil surface area. The total mineral surface areas were determined for soils from eight different fields selected from a long term study (1972–2006 of annual biosolids application to 41 fields in central Illinois varying in size from 3.6 to 66 ha. The surface areas for the soils varied from 1 to 9 m2/g of soil. The biological degradation rates for the eight soils were determined using a biological degradation rate model (DRM and varied from 0.02 to 0.20/year−1. Regression analysis revealed that the degradation rate was positively associated with mineral soil surface area (1 m2/g produces 0.018 year−1 increase in the degradation rate. The annual soil sequestration rate was calculated to increase from 1% to 6% when the soil total surface area increased from 1 to 9 m2/g of soil. Therefore, land application of biosolids is an effective way to enhance carbon sequestration in soils and reduce greenhouse gas emissions.

  11. Theoretical studies of the work functions of Pd-based bimetallic surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Zhao-Bin; Wu, Feng; Wang, Yue-Chao; Jiang, Hong, E-mail: jianghchem@pku.edu.cn [Beijing National Laboratory of Molecular Sciences, State Key Laboratory of Rare Earth Materials Chemistry and Applications, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871 (China)

    2015-06-07

    Work functions of Pd-based bimetallic surfaces, including mainly M/Pd(111), Pd/M, and Pd/M/Pd(111) (M = 4d transition metals, Cu, Au, and Pt), are studied using density functional theory. We find that the work function of these bimetallic surfaces is significantly different from that of parent metals. Careful analysis based on Bader charges and electron density difference indicates that the variation of the work function in bimetallic surfaces can be mainly attributed to two factors: (1) charge transfer between the two different metals as a result of their different intrinsic electronegativity, and (2) the charge redistribution induced by chemical bonding between the top two layers. The first factor can be related to the contact potential, i.e., the work function difference between two metals in direct contact, and the second factor can be well characterized by the change in the charge spilling out into vacuum. We also find that the variation in the work functions of Pd/M/Pd(111) surfaces correlates very well with the variation of the d-band center of the surface Pd atom. The findings in this work can be used to provide general guidelines to design new bimetallic surfaces with desired electronic properties.

  12. Ab initio and work function and surface energy anisotropy of LaB6

    NARCIS (Netherlands)

    Uijttewaal, M. A.; de Wijs, G. A.; de Groot, R. A.

    2006-01-01

    Lanthanum hexaboride is one of the cathode materials most used in high-power electronics technology, but the many experimental results do not provide a consistent picture of the surface properties. Therefore, we report the first ab initio calculations of the work functions and surface energies of

  13. Interrelation of work function and surface stability : The case of BaAl4

    NARCIS (Netherlands)

    Uijttewaal, MA; de Wijs, GA; de Groot, RA; Coehoorn, R; van Elsbergen, [No Value; Weijtens, CHL

    2005-01-01

    The relationship between the work function (Phi) and the surface stability of compounds is, to our knowledge, unknown but very important for applications such as organic light-emitting diodes. This relation is studied using first-principles calculations on various surfaces of BaAl4. The most stable

  14. Ab initio and work function and surface energy anisotropy of LaB6

    NARCIS (Netherlands)

    Uijttewaal, M. A.; de Wijs, G. A.; de Groot, R. A.

    2006-01-01

    Lanthanum hexaboride is one of the cathode materials most used in high-power electronics technology, but the many experimental results do not provide a consistent picture of the surface properties. Therefore, we report the first ab initio calculations of the work functions and surface energies of th

  15. Pore Scale Heterogeneity in the Mineral Distribution and Surface Area of Porous Rocks

    Science.gov (United States)

    Lai, Peter; Krevor, Sam

    2015-04-01

    An important control on rate of interfacial processes between minerals and aqueous solutions such as nucleation of solids, and mineral dissolution and growth is reactive surface area. In geochemical modelling, the continuum hypothesis is based on the assumption that the system can be represented by a sufficiently large number of representative elemental volumes. There has been recent interest in studying the impact of this assumption on reaction-transport coupled systems. In this study, the impact of pore-scale heterogeneity on the distribution of reactive surface area is discussed. 3D images obtained using x-ray micro-tomography were used to characterise the distribution of reactive surface area. The results were compared to independent observations. Mineral identification using x- ray diffraction and fluorescence suggested general agreement with CT analysis. Nitrogen BET surface areas were one to two orders of magnitude higher than measurements from x-ray imagery. Co- registered images of Berea sandstone from x-ray and energy dispersive spectroscopy imagery suggested that quartz, K-feldspar and most clays could be identified. However, minor minerals such as albite and illite did not exhibit enough contrast. In Berea sandstone, mineral surface area fraction was poorly correlated to the mineral volumetric fraction. Clay and feldspar minerals exhibited higher surface area fractions than bulk mineralogy suggested. In contrast, in the Edwards carbonate samples, modal mineral composition correlated with mineral-specific surface area. Berea sandstone revealed a characteristic pore size at which a surface area distribution may be used to quantify heterogeneity. Conversely, the carbonate samples suggested a continuous range of pore sizes across length scales. A comparison with pore network model simulations from the literature was made. First order estimates of mineral specific correlations between geometric area measured in the x-ray images were used to convert the CT

  16. Corrective measures evaluation work plan : Technical Area V Groundwater : revision 0.

    Energy Technology Data Exchange (ETDEWEB)

    Lebow, Patrick S.; Dettmers, Dana L.; Hall, Kevin A.

    2004-12-01

    This document, which is prepared as directed by the Compliance Order on Consent (COOC) issued by the New Mexico Environment Department, identifies and outlines a process to evaluate remedial alternatives to identify a corrective measure for the Sandia National Laboratories/New Mexico Technical Area (TA)-V Groundwater. The COOC provides guidance for implementation of a Corrective Measures Evaluation (CME) for the TA-V Groundwater. This Work Plan documents an initial screening of remedial technologies and presents a list of possible remedial alternatives for those technologies that passed the screening. This Work Plan outlines the methods for evaluating these remedial alternatives and describes possible site-specific evaluation activities necessary to estimate remedy effectiveness and cost. These methods will be reported in the CME Report. This Work Plan outlines the CME Report, including key components and a description of the corrective measures process.

  17. Analysis of particle size reduction on overall surface area and enzymatic hydrolysis yield of corn stover.

    Science.gov (United States)

    Li, Hanjie; Ye, Chenlin; Liu, Ke; Gu, Hanqi; Du, Weitao; Bao, Jie

    2015-01-01

    Particle size of lignocellulose materials is an important factor for enzymatic hydrolysis efficiency. In this study, corn stover was milled and sieved into different size fractions from 1.42, 0.69, 0.34, to 0.21 mm, and the corresponding enzymatic hydrolysis yields were 24.69, 23.96, 25.34, and 26.97 %, respectively. The results indicate that the hydrolysis yield is approximately constant with changing corn stover particle sizes in the experimental range. The overall surface area and the inner pore size measurement show that the overall specific surface area was less than 2 % with the half reduction of particle size due to the greater inner pore surface area. The scanning electron microscope photographs gave direct evidence of the much greater inner pore surface area of corn stover particles. This result provided a reference when a proper size reduction of lignocellulose materials is considered in biorefining operations.

  18. Modelling skin surface areas involved in water transfer in the Palmate Newt (Lissotriton helveticus)

    National Research Council Canada - National Science Library

    Wardziak, Thomas; Oxarango, Laurent; Valette, Sebastien; Mahieu-Williame, Laurent; Joly, Pierre

    2014-01-01

    Magnetic resonance imaging (MRI) based 3D reconstructions were used to derive accurate quantitative data on body volume and functional skin surface areas involved in water transfer in the Palmate Newt...

  19. Synthesis and characterization of large specific surface area nanostructured amorphous silica materials.

    Science.gov (United States)

    Marquez-Linares, Francisco; Roque-Malherbe, Rolando M A

    2006-04-01

    Large specific surface area materials attract wide attention because of their applications in adsorption, catalysis, and nanotechnology. In the present study, we describe the synthesis and characterization of nanostructured amorphous silica materials. These materials were obtained by means of a modification of the Stobe-Fink-Bohn (SFB) method. The morphology and essential features of the synthesized materials have been studied using an automated surface area and pore size analyzer and scanning electron microscopy. The existence of a micro/mesoporous structure in the obtained materials has been established. It was also found that the obtained particle packing materials show large specific surface area up to 1,600 m2/g. (To our best knowledge, there is no any reported amorphous silica material with such a higher specific surface area.) The obtained materials could be useful in the manufacture of adsorbents, catalyst supports, and other nanotechnological applications.

  20. Evolution of Specific Surface Area Inside Glass Immersed in Beishan Groundwater

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>The surface area of the fissure inside the glass block is an important parameter influencing the long term behavior of high-level radioactive waste glass in the aqueous media during the deep geological

  1. Benchmarking sensitivity of biophysical processes to leaf area changes in land surface models

    Science.gov (United States)

    Forzieri, Giovanni; Duveiller, Gregory; Georgievski, Goran; Li, Wei; Robestson, Eddy; Kautz, Markus; Lawrence, Peter; Ciais, Philippe; Pongratz, Julia; Sitch, Stephen; Wiltshire, Andy; Arneth, Almut; Cescatti, Alessandro

    2017-04-01

    Land surface models (LSM) are widely applied as supporting tools for policy-relevant assessment of climate change and its impact on terrestrial ecosystems, yet knowledge of their performance skills in representing the sensitivity of biophysical processes to changes in vegetation density is still limited. This is particularly relevant in light of the substantial impacts on regional climate associated with the changes in leaf area index (LAI) following the observed global greening. Benchmarking LSMs on the sensitivity of the simulated processes to vegetation density is essential to reduce their uncertainty and improve the representation of these effects. Here we present a novel benchmark system to assess model capacity in reproducing land surface-atmosphere energy exchanges modulated by vegetation density. Through a collaborative effort of different modeling groups, a consistent set of land surface energy fluxes and LAI dynamics has been generated from multiple LSMs, including JSBACH, JULES, ORCHIDEE, CLM4.5 and LPJ-GUESS. Relationships of interannual variations of modeled surface fluxes to LAI changes have been analyzed at global scale across different climatological gradients and compared with satellite-based products. A set of scoring metrics has been used to assess the overall model performances and a detailed analysis in the climate space has been provided to diagnose possible model errors associated to background conditions. Results have enabled us to identify model-specific strengths and deficiencies. An overall best performing model does not emerge from the analyses. However, the comparison with other models that work better under certain metrics and conditions indicates that improvements are expected to be potentially achievable. A general amplification of the biophysical processes mediated by vegetation is found across the different land surface schemes. Grasslands are characterized by an underestimated year-to-year variability of LAI in cold climates

  2. The surface area of human V1 predicts the subjective experience of object size

    OpenAIRE

    Schwarzkopf, Dietrich Samuel; Song, Chen; Rees, Geraint

    2010-01-01

    Abstract The surface area of human primary visual cortex (V1) varies substantially between individuals for unknown reasons. Here, we show that this variability is strongly and negatively correlated with the magnitude of two common visual illusions, where two physically identical objects appear different in size due to their context. Because such illusions dissociate conscious perception from physical stimulation, our findings indicate that the surface area of V1 predicts variabilit...

  3. Interdependence between body surface area and ultraviolet B dose in vitamin D production

    DEFF Research Database (Denmark)

    Bogh, M K B; Schmedes, Anne; Philipsen, P A;

    2011-01-01

    Ultraviolet (UV) B radiation increases serum vitamin D level expressed as 25-hydroxyvitamin-D(3) [25(OH)D], but the relationship to body surface area and UVB dose needs investigation.......Ultraviolet (UV) B radiation increases serum vitamin D level expressed as 25-hydroxyvitamin-D(3) [25(OH)D], but the relationship to body surface area and UVB dose needs investigation....

  4. Method of forming macro-structured high surface area transparent conductive oxide electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Forman, Arnold J.; Chen, Zhebo; Jaramillo, Thomas F.

    2016-01-05

    A method of forming a high surface area transparent conducting electrode is provided that includes depositing a transparent conducting thin film on a conductive substrate, where the transparent conducting thin film includes transparent conductive particles and a solution-based transparent conducting adhesive layer which serves to coat and bind together the transparent conducting particles, and heat treating the transparent conducting adhesion layer on the conductive substrate, where an increased surface area transparent conducting electrode is formed.

  5. High-surface-area, dual-function oxygen electrocatalysts for space power applications

    Science.gov (United States)

    Ham, David O.; Moniz, Gary; Taylor, E. Jennings

    1987-01-01

    The processes of hydration/dehydration and carbonation/decarbonation are investigated as an approach to provide higher surface area mixed metal oxides that are more active electrochemically. These materials are candidates for use as electrocatalysts and electrocatalyst supports for alkaline electrolyzers and fuel cells. For the case of the perovskite, LaCoO3 , higher surface areas were achieved with no change in structure and a more active oxygen electrocatalyst.

  6. Estimation of surface area concentration of workplace incidental nanoparticles based on number and mass concentrations

    Science.gov (United States)

    Park, J. Y.; Ramachandran, G.; Raynor, P. C.; Kim, S. W.

    2011-10-01

    Surface area was estimated by three different methods using number and/or mass concentrations obtained from either two or three instruments that are commonly used in the field. The estimated surface area concentrations were compared with reference surface area concentrations (SAREF) calculated from the particle size distributions obtained from a scanning mobility particle sizer and an optical particle counter (OPC). The first estimation method (SAPSD) used particle size distribution measured by a condensation particle counter (CPC) and an OPC. The second method (SAINV1) used an inversion routine based on PM1.0, PM2.5, and number concentrations to reconstruct assumed lognormal size distributions by minimizing the difference between measurements and calculated values. The third method (SAINV2) utilized a simpler inversion method that used PM1.0 and number concentrations to construct a lognormal size distribution with an assumed value of geometric standard deviation. All estimated surface area concentrations were calculated from the reconstructed size distributions. These methods were evaluated using particle measurements obtained in a restaurant, an aluminum die-casting factory, and a diesel engine laboratory. SAPSD was 0.7-1.8 times higher and SAINV1 and SAINV2 were 2.2-8 times higher than SAREF in the restaurant and diesel engine laboratory. In the die casting facility, all estimated surface area concentrations were lower than SAREF. However, the estimated surface area concentration using all three methods had qualitatively similar exposure trends and rankings to those using SAREF within a workplace. This study suggests that surface area concentration estimation based on particle size distribution (SAPSD) is a more accurate and convenient method to estimate surface area concentrations than estimation methods using inversion routines and may be feasible to use for classifying exposure groups and identifying exposure trends.

  7. Probing large area surface plasmon interference in thin metal films using photon scanning tunneling microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Passian, A.; Wig, A.; Lereu, A.L.; Evans, P.G.; Meriaudeau, F.; Thundat, T.; Ferrell, T.L

    2004-08-15

    The interference of surface plasmons can provide important information regarding the surface features of the hosting thin metal film. We present an investigation of the interference of optically excited surface plasmons in the Kretschmann configuration in the visible spectrum. Large area surface plasmon interference regions are generated at several wavelengths and imaged with the photon scanning tunneling microscope. Furthermore, we discuss the non-retarded dispersion relations for the surface plasmons in the probe-metal system modeled as confocal hyperboloids of revolution in the spheroidal coordinate systems.

  8. Large-area homogeneous periodic surface structures generated on the surface of sputtered boron carbide thin films by femtosecond laser processing

    Energy Technology Data Exchange (ETDEWEB)

    Serra, R., E-mail: ricardo.serra@dem.uc.pt [SEG-CEMUC, Mechanical Engineering Department, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra (Portugal); Oliveira, V. [ICEMS-Instituto de Ciência e Engenharia de Materiais e Superfícies, Avenida Rovisco Pais no 1, 1049-001 Lisbon (Portugal); Instituto Superior de Engenharia de Lisboa, Avenida Conselheiro Emídio Navarro no 1, 1959-007 Lisbon (Portugal); Oliveira, J.C. [SEG-CEMUC, Mechanical Engineering Department, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra (Portugal); Kubart, T. [The Ångström Laboratory, Solid State Electronics, P.O. Box 534, SE-751 21 Uppsala (Sweden); Vilar, R. [Instituto Superior de Engenharia de Lisboa, Avenida Conselheiro Emídio Navarro no 1, 1959-007 Lisbon (Portugal); Instituto Superior Técnico, Avenida Rovisco Pais no 1, 1049-001 Lisbon (Portugal); Cavaleiro, A. [SEG-CEMUC, Mechanical Engineering Department, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra (Portugal)

    2015-03-15

    Highlights: • Large-area LIPSS were formed by femtosecond laser processing B-C films surface. • The LIPSS spatial period increases with laser fluence (140–200 nm). • Stress-related sinusoidal-like undulations were formed on the B-C films surface. • The undulations amplitude (down to a few nanometres) increases with laser fluence. • Laser radiation absorption increases with surface roughness. - Abstract: Amorphous and crystalline sputtered boron carbide thin films have a very high hardness even surpassing that of bulk crystalline boron carbide (≈41 GPa). However, magnetron sputtered B-C films have high friction coefficients (C.o.F) which limit their industrial application. Nanopatterning of materials surfaces has been proposed as a solution to decrease the C.o.F. The contact area of the nanopatterned surfaces is decreased due to the nanometre size of the asperities which results in a significant reduction of adhesion and friction. In the present work, the surface of amorphous and polycrystalline B-C thin films deposited by magnetron sputtering was nanopatterned using infrared femtosecond laser radiation. Successive parallel laser tracks 10 μm apart were overlapped in order to obtain a processed area of about 3 mm{sup 2}. Sinusoidal-like undulations with the same spatial period as the laser tracks were formed on the surface of the amorphous boron carbide films after laser processing. The undulations amplitude increases with increasing laser fluence. The formation of undulations with a 10 μm period was also observed on the surface of the crystalline boron carbide film processed with a pulse energy of 72 μJ. The amplitude of the undulations is about 10 times higher than in the amorphous films processed at the same pulse energy due to the higher roughness of the films and consequent increase in laser radiation absorption. LIPSS formation on the surface of the films was achieved for the three B-C films under study. However, LIPSS are formed under

  9. SURFACE AREA, VOLUME, MASS, AND DENSITY DISTRIBUTIONS FOR SIZED BOMASS PARTICLES

    Energy Technology Data Exchange (ETDEWEB)

    Ramanathan Sampath

    2004-05-01

    This semi-annual technical progress report describes work performed at Morehouse College under DOE Grant No. DE-FC26-04NT42130 during the period July 01, 2004 to December 31, 2004 which covers the first six months of the project. Presently work is in progress to characterize surface area, volume, mass, and density distributions for sized biomass particles. During this reporting period, supply requests were processed and supplies including biomass test particles (hardwood sawdust AI14546) in the size range of 100-200 microns were obtained from a cofiring pilot plant research facility owned by Southern Company, Birmingham, AL. Morehouse has completed setting up of the gravimetric technique measurement system in the heat transfer laboratory, department of physics and dual degree engineering, Morehouse College. Simultaneously, REM, our subcontractor, has completed setting up of the electrodynamic balance (EDB) measurement system to characterize shape and mass for individual biomass particles. Testing of the gravimetric system, and calibration of the cameras and imaging systems using known sizes of polystyrene particles are in progress.

  10. Features of wind field over the sea surface in the coastal area

    Science.gov (United States)

    Monzikova, A. K.; Kudryavtsev, V. N.; Myasoedov, A. G.; Chapron, B.; Zilitinkevich, S. S.

    2017-01-01

    In this paper we analyze SAR wind field features, in particular the effects of wind shadowing. These effects represent the dynamics of the internal atmospheric boundary layer, which is formed due to the transition of the air flow arriving from the rough land surface to the "smooth" water surface. In the wind-shadowed area, the flow accelerates, and a surface wind stress increases with fetch. The width of the shadow depends not only on the wind speed and atmospheric boundary layer stratification, but also on geographic features such as windflow multiple transformations over the complex surface land-Lake Chudskoe-land-Gulf of Finland. Measurements showed that, in the area of wind acceleration, the surface stress normalized by an equilibrium value (far from the coast) is a universal function of dimensionless fetch Xf/G. Surface wind stress reaches an equilibrium value at Xf/G ≈ 0.4, which is the scale of the planetary-boundary-layer relaxation.

  11. Carboxylator: incorporating solvent-accessible surface area for identifying protein carboxylation sites

    Science.gov (United States)

    Lu, Cheng-Tsung; Chen, Shu-An; Bretaña, Neil Arvin; Cheng, Tzu-Hsiu; Lee, Tzong-Yi

    2011-10-01

    In proteins, glutamate (Glu) residues are transformed into γ-carboxyglutamate (Gla) residues in a process called carboxylation. The process of protein carboxylation catalyzed by γ-glutamyl carboxylase is deemed to be important due to its involvement in biological processes such as blood clotting cascade and bone growth. There is an increasing interest within the scientific community to identify protein carboxylation sites. However, experimental identification of carboxylation sites via mass spectrometry-based methods is observed to be expensive, time-consuming, and labor-intensive. Thus, we were motivated to design a computational method for identifying protein carboxylation sites. This work aims to investigate the protein carboxylation by considering the composition of amino acids that surround modification sites. With the implication of a modified residue prefers to be accessible on the surface of a protein, the solvent-accessible surface area (ASA) around carboxylation sites is also investigated. Radial basis function network is then employed to build a predictive model using various features for identifying carboxylation sites. Based on a five-fold cross-validation evaluation, a predictive model trained using the combined features of amino acid sequence (AA20D), amino acid composition, and ASA, yields the highest accuracy at 0.874. Furthermore, an independent test done involving data not included in the cross-validation process indicates that in silico identification is a feasible means of preliminary analysis. Additionally, the predictive method presented in this work is implemented as Carboxylator (http://csb.cse.yzu.edu.tw/Carboxylator/), a web-based tool for identifying carboxylated proteins with modification sites in order to help users in investigating γ-glutamyl carboxylation.

  12. Greenland surface mass-balance observations from the ice-sheet ablation area and local glaciers

    NARCIS (Netherlands)

    Machguth, Horst; Thomsen, Henrik H.; Weidick, Anker; Ahlstrøm, Andreas P.; Abermann, Jakob; Andersen, Morten L.; Andersen, Signe B.; Bjørk, Anders A.; Box, Jason E.; Braithwaite, Roger J.; Bøggild, Carl E.; Citterio, Michele; Clement, Poul; Colgan, William; Fausto, Robert S.; Gleie, Karin; Gubler, Stefanie; Hasholt, Bent; Hynek, Bernhard; Knudsen, Niels T.; Larsen, Signe H.; Mernild, Sebastian H.; Oerlemans, Johannes; Oerter, Hans; Olesen, Ole B.; Smeets, C. J P Paul; Steffen, Konrad; Stober, Manfred; Sugiyama, Shin; Van As, Dirk; Van Den Broeke, Michiel R.; Van De Wal, Roderik S W

    2016-01-01

    Glacier surface mass-balance measurements on Greenland started more than a century ago, but no compilation exists of the observations from the ablation area of the ice sheet and local glaciers. Such data could be used in the evaluation of modelled surface mass balance, or to document changes in glac

  13. Greenland surface mass-balance observations from the ice-sheet ablation area and local glaciers

    DEFF Research Database (Denmark)

    Machguth, Horst; Thomsen, Henrik; Weidick, Anker;

    2016-01-01

    Glacier surface mass-balance measurements on Greenland started more than a century ago, but no compilation exists of the observations from the ablation area of the ice sheet and local glaciers. Such data could be used in the evaluation of modelled surface mass balance, or to document changes in g...

  14. Acid/base bifunctional carbonaceous nanomaterial with large surface area: Preparation, characterization, and adsorption properties for cationic and anionic compounds

    Energy Technology Data Exchange (ETDEWEB)

    Li, Kai; Ma, Chun–Fang; Ling, Yuan; Li, Meng [Department of Chemistry, Faculty of Material Science and Chemistry, China University of Geosciences, Wuhan 430074 (China); Gao, Qiang, E-mail: gaoqiang@cug.edu.cn [Department of Chemistry, Faculty of Material Science and Chemistry, China University of Geosciences, Wuhan 430074 (China); Engineering Research Center of Nano-Geo Materials of Ministry of Education, China University of Geosciences, Wuhan 430074 (China); Luo, Wen–Jun, E-mail: heartnohome@yahoo.com.cn [Department of Chemistry, Faculty of Material Science and Chemistry, China University of Geosciences, Wuhan 430074 (China)

    2015-07-15

    Nanostructured carbonaceous materials are extremely important in the nano field, yet developing simple, mild, and “green” methods that can make such materials possess large surface area and rich functional groups on their surfaces still remains a considerable challenge. Herein, a one-pot and environment-friendly method, i.e., thermal treatment (180 °C; 18 h) of water mixed with glucose and chitosan (CTS), has been proposed. The resultant carbonaceous nanomaterials were characterized by field emitting scanning electron microscope, N{sub 2} adsorption/desorption, Fourier transform infrared spectroscope, X-ray photoelectron spectroscopy, and zeta-potential analysis. It was found that, in contrast to the conventional hydrothermally carbonized product from pure glucose, with low surface area (9.3 m{sup 2} g{sup −1}) and pore volume (0.016 cm{sup 3} g{sup −1}), the CTS-added carbonaceous products showed satisfactory textural parameters (surface area and pore volume up to 254 m{sup 2} g{sup −1} and 0.701 cm{sup 3} g{sup −1}, respectively). Moreover, it was also interestingly found that these CTS-added carbonaceous products possessed both acidic (–COOH) and basic (–NH{sub 2}) groups on their surfaces. Taking the advantages of large surface area and –COOH/–NH{sub 2} bifunctional surface, the carbonaceous nanomaterials exhibited excellent performance for adsorptions of cationic compound (i.e., methylene blue) at pH 10 and anionic compound (i.e., acid red 18) at pH 2, respectively. This work not only provides a simple and green route to prepare acid/base bifunctional carbonaceous nanomaterials with large surface area but also well demonstrates their potential for application in adsorption. - Highlights: • A simple and green method was proposed to prepare carbon nanomaterials. • The carbon product showed acid/base bifunctional surface with large surface area. • The carbon material could efficiently adsorb both cationic and anionic compounds.

  15. Ra and the average effective strain of surface asperities deformed in metal-working processes

    DEFF Research Database (Denmark)

    Bay, Niels; Wanheim, Tarras; Petersen, A. S

    1975-01-01

    Based upon a slip-line analysis of the plastic deformation of surface asperities, a theory is developed determining the Ra-value (c.l.a.) and the average effective strain in the surface layer when deforming asperities in metal-working processes. The ratio between Ra and Ra0, the Ra-value after...... and before deformation, is a function of the nominal normal pressure and the initial slope γ0 of the surface asperities. The last parameter does not influence Ra significantly. The average effective strain View the MathML sourcege in the deformed surface layer is a function of the nominal normal pressure...

  16. Develoment of Effectiveness in working Performance of The Educational Service Area,Mahasarakam Province

    Directory of Open Access Journals (Sweden)

    Amnaj Chanawongse

    2017-03-01

    Full Text Available This research aimed to study the quality of the working Performance of the authority under The Educational Service Area, Mahasarakham province, and to find guidline to improve the effectiveness of the working Performance of the authority under The Educational Service Area, Mahasarakham province.The population consisted of the government officials and the Educational Service Area Comittes: by using sampling of 159 persons. The tools used to collect information, including questionnaires and interviews. The statistics used to average ( percentage and standard deviation (S.D. The research found that a study of the effectiveness of the overall operation was at a high level. The suggestions showed that: 1 The general administration should be the promotion of local development. Policies and plans build schools and provide students with both quantity and quality. 2 The Acadamie Administration should provide a personal development plan, 3 The operations should provide a display of learning, performance of teachers, performance of the executives, encourage the community to participate more effectively in the management 4 The impact of operations on communities should expedite the administration in society resulting in a positive way.

  17. Skin and surface lead contamination, hygiene programs, and work practices of bridge surface preparation and painting contractors.

    Science.gov (United States)

    Virji, M Abbas; Woskie, Susan R; Pepper, Lewis D

    2009-02-01

    A 2005 regulatory review of the lead in construction standard by the Occupational Safety and Health Administration (OSHA) noted that alternative pathways of exposure can be as significant as inhalation exposure and that noncompliance with the standard pertaining to hygiene facilities and practices was the second most commonly violated section of the standard. Noncompliance with provisions of the standard and unhealthy work and hygiene practices likely increase the likelihood of take-home lead via contaminated clothing, automobiles, and skin, thus contributing to elevated blood lead levels (BLL) among construction workers and their family members. We performed a cross-sectional study of bridge painters working for small contractors in Massachusetts to investigate causes of persistent elevated BLLs and to assess lead exposures. Thirteen work sites were evaluated for a 2-week period during which surface and skin wipe samples were collected and qualitative information was obtained on personal hygiene practices, decontamination and hand wash facilities, and respiratory protection programs. Results showed lead contamination on workers' skin, respirators, personal automobiles, and the decontamination unit, indicating a significant potential for take-home lead exposure. Overall, the geometric mean (GM) skin lead levels ranged from 373 microg on workers' faces at end of shift to 814 microg on hands at break time. The overall GM lead level inside respirators was 143 microg before work and 286 microg after work. Lead contamination was also present inside workers' personal vehicles as well as on surfaces inside the clean side of the decontamination unit. Review of the respiratory protection programs, work site decontamination and hand wash facilities, and personal hygiene practices indicated that these factors had significant impact on skin and surface contamination levels and identified significant opportunities for improving work site facilities and personal practices

  18. A program to compute the area of an irregular polygon on a spheroidal surface

    Digital Repository Service at National Institute of Oceanography (India)

    Sivakholundu, K.M.; Prabaharan, N.

    ) INTRODUCTION A number of oC128shore activities area such as exploration for polymetallic nodules, demarcation of EEZ, etc. necessitates the definition of large boundaries on a geographical surface. The area de- marcated by these boundaries have to be calculated...

  19. Application of stereological methods to estimate post-mortem brain surface area using 3T MRI

    DEFF Research Database (Denmark)

    Furlong, Carolyn; García-Fiñana, Marta; Puddephat, Michael

    2013-01-01

    The Cavalieri and Vertical Sections methods of design based stereology were applied in combination with 3 tesla (i.e. 3T) Magnetic Resonance Imaging (MRI) to estimate cortical and subcortical volume, area of the pial surface, area of the grey-white matter boundary, and thickness of the cerebral...

  20. Remote Sensing Parameterization of Land Surface Heat Fluxes over Arid and Semi-arid Areas

    Institute of Scientific and Technical Information of China (English)

    马耀明; 王介民; 黄荣辉; 卫国安; MassimoMENENTI; 苏中波; 胡泽勇; 高峰; 文军

    2003-01-01

    Dealing with the regional land surfaces heat fluxes over inhomogeneous land surfaces in arid and semi-arid areas is an important but not an easy issue. In this study, one parameterization method based on satellite remote sensing and field observations is proposed and tested for deriving the regional land surface heat fluxes over inhomogeneous landscapes. As a case study, the method is applied to the Dunhuang experimental area and the HEIFE (Heihe River Field Experiment, 1988-1994) area. The Dunhuang area is selected as a basic experimental area for the Chinese National Key Programme for Developing Basic Sciences: Research on the Formation Mecbanism and Prediction Theory of Severe Climate Disaster in China (G1998040900, 1999-2003). The four scenes of Landsat TM data used in this study are 3 June 2000,22 August 2000, and 29 January 2001 for the Dunhuang area and 9 July 1991 for the HEIFE area. The regional distributions of land surface variables, vegetation variables, and heat fluxes over inhomogeneous landscapes in arid and semi-arid areas are obtained in this study.

  1. Developing a health and safety plan for hazardous field work in remote areas.

    Science.gov (United States)

    Gochfeld, Michael; Volz, Conrad D; Burger, Joanna; Jewett, Stephen; Powers, Charles W; Friedlander, Barry

    2006-12-01

    Developing health and safety plans (HASPs) is a common feature of occupational safety and health for many workplaces. Formal HASPs are a requirement for hazardous waste work, requiring the anticipation and identification of hazards and embodying the training, equipping, and evaluation of workers. Aside from OSHA, there are relatively few manuals or examples and virtually no papers that provide practical guidance in what a HASP should cover or how to create and implement one. Moreover, existing guidance refers to spatially circumscribed worksites. This article details development of a HASP to cover field researchers and ship personnel conducting scientific research in a remote area of the world (Amchitka Island in the western Aleutians), hundreds of kilometers from the nearest emergency room. It required characterizing the kinds of work to be performed and anticipating the hazards that could be encountered. It illustrates the meshing of a general HASP with a ship safety plan, a dive safety plan, and specialized topics, including stop-work authority, rock climbing, firearms, vehicle safety, and communication strategy. Remote area operations are a growing challenge facing the profession. An expedition of this sort requires extensive planning and experienced safety personnel and cannot rely on luck to ensure the safe return of participants.

  2. Selection of organic Rankine cycle working fluid based on unit-heat-exchange-area net power

    Institute of Scientific and Technical Information of China (English)

    郭美茹; 朱启的; 孙志强; 周天; 周孑民

    2015-01-01

    To improve energy conversion efficiency, optimization of the working fluids in organic Rankine cycles (ORCs) was explored in the range of low-temperature heat sources. The concept of unit-heat-exchange-area (UHEA) net power, embodying the cost/performance ratio of an ORC system, was proposed as a new indicator to judge the suitability of ORC working fluids on a given condition. The heat exchange area was computed by an improved evaporator model without fixing the minimum temperature difference between working fluid and hot fluid, and the flow pattern transition during heat exchange was also taken into account. The maximum UHEA net powers obtained show that dry organic fluids are more suitable for ORCs than wet organic fluids to recover low-temperature heat. The organic fluid 1-butene is recommended if the inlet temperature of hot fluid is 353.15−363.15 K or 443.15−453.15 K, heptane is more suitable at 373.15−423.15 K, and R245ca is a good option at 483.15−503.15 K.

  3. Surface Dipole Formation and Lowering of the Work Function by Cs Adsorption on InP(100) Surface

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Y.; Liu, Z.; Pianetta, P.

    2007-06-08

    The Cs adsorption on InP(100) surface is studied with Synchrotron Radiation Photoelectron Spectroscopy. The charge transfer from Cs to the InP substrate is observed from the Cs induced In4d and P2p components, and this charge transfer results in surface dipole formation and lowering of the work function. The Cs4d intensity saturates at coverage of one monolayer (ML). However, a break point is observed at 0.5 ML, which coincides with the achievement of the minimum work function. This break point is due to the different vertical placement of the first and the second half monolayer of Cs atoms. Based on this information, a simple bi-layer structure for the Cs layer is presented. This bi-layer structure is consistent with the behavior of the charge transfer from the Cs to the InP substrate at different Cs coverages. This, in turn, explains why the work function decreases to a minimum at 0.5 ML of Cs and remains almost constant beyond this coverage. The depolarization of the surface dipoles is attributed to the saturation of charge transfer to the surface In atoms and the polarization of the Cs atoms in the second half monolayer induced by the positively charged Cs atoms in the first half monolayer.

  4. Surface Dipole Formation and Lowering of the Work Function by Cs Adsorption on InP(100) Surface

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Y.; Liu, Z.; Pianetta, P.

    2007-06-08

    The Cs adsorption on InP(100) surface is studied with Synchrotron Radiation Photoelectron Spectroscopy. The charge transfer from Cs to the InP substrate is observed from the Cs induced In4d and P2p components, and this charge transfer results in surface dipole formation and lowering of the work function. The Cs4d intensity saturates at coverage of one monolayer (ML). However, a break point is observed at 0.5 ML, which coincides with the achievement of the minimum work function. This break point is due to the different vertical placement of the first and the second half monolayer of Cs atoms. Based on this information, a simple bi-layer structure for the Cs layer is presented. This bi-layer structure is consistent with the behavior of the charge transfer from the Cs to the InP substrate at different Cs coverages. This, in turn, explains why the work function decreases to a minimum at 0.5 ML of Cs and remains almost constant beyond this coverage. The depolarization of the surface dipoles is attributed to the saturation of charge transfer to the surface In atoms and the polarization of the Cs atoms in the second half monolayer induced by the positively charged Cs atoms in the first half monolayer.

  5. Greenland surface mass-balance observations from the ice-sheet ablation area and local glaciers

    DEFF Research Database (Denmark)

    Machguth, Horst; Thomsen, Henrik H.; Weidick, Anker

    2016-01-01

    in glacier melt independently from model output. Here, we present a comprehensive database of Greenland glacier surface mass-balance observations from the ablation area of the ice sheet and local glaciers. The database spans the 123 a from 1892 to 2015, contains a total of similar to 3000 measurements from......Glacier surface mass-balance measurements on Greenland started more than a century ago, but no compilation exists of the observations from the ablation area of the ice sheet and local glaciers. Such data could be used in the evaluation of modelled surface mass balance, or to document changes...

  6. Greenland surface mass-balance observations from the ice-sheet ablation area and local glaciers

    DEFF Research Database (Denmark)

    Machguth, Horst; Thomsen, Henrik H.; Weidick, Anker;

    2016-01-01

    Glacier surface mass-balance measurements on Greenland started more than a century ago, but no compilation exists of the observations from the ablation area of the ice sheet and local glaciers. Such data could be used in the evaluation of modelled surface mass balance, or to document changes...... in glacier melt independently from model output. Here, we present a comprehensive database of Greenland glacier surface mass-balance observations from the ablation area of the ice sheet and local glaciers. The database spans the 123 a from 1892 to 2015, contains a total of similar to 3000 measurements from...

  7. Lack of Precision of Burn Surface Area Calculation by UK Armed Forces Medical Personnel

    Science.gov (United States)

    2014-03-01

    abdominal compartment syn drome, and death. Logistic regression in this retrospective study of 58 military burn patients also demonstrated that over...influence of body mass index on burn surface area estimated from the area of the hand. Burns 2001;27:591 4. [17] Nagel TR, Schunk JE. Using the hand to...estimate the surface area of a burn in children. Pediatr Emerg Care 1997;13:254 5. [18] Rossiter ND, Chapman P, Haywood IA. How big is a hand? Burns

  8. Euclidean Wilson loops and Minimal Area Surfaces in Minkowski AdS3

    CERN Document Server

    Irrgang, Andrew

    2015-01-01

    The AdS/CFT correspondence relates Wilson loops in N=4 SYM theory to minimal area surfaces in AdS5xS5 space. If the Wilson loop is Euclidean and confined to a plane (t,x) then the dual surface is Euclidean and lives in Minkowski AdS3. In this paper we study such minimal area surfaces generalizing previous results obtained in the Euclidean case. Since the surfaces we consider have the topology of a disk, the holonomy of the flat current vanishes which is equivalent to the condition that a certain boundary Schroedinger equation has all its solutions anti-periodic. If the potential for that Schroedinger equation is found then reconstructing the surface and finding the area become simpler. In particular we write a formula for the Area in terms of the Schwarzian derivative of the contour. Finally an infinite parameter family of analytical solutions using Riemann Theta functions is described. In this case, both the area and the shape of the surface are given analytically and used to check the previous results.

  9. Determination of Surface Area of Red Mud and BeringiteUsing Methylene Blue Method

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The adsorption of methylene blue (MB) on three soil amendments, red mud from Hungary, red mud from UK and beringite from Belgium, was studied to determine the surface areas of the amendments using a 0.005 mol L-1 NaCl solution and deionised water as background solutions. The surface areas determined by the methylene blue method in the 0.005 mol L-1 NaCl solution were 3.357, 2.340 and 5.576 m2 g-1 for red nmd (Hungary), red mud (UK) and beringite, respectively, slightly lower than those in the deionised water system. The largest surface area of beringite suggested that the MB could adsorb effectively on the interlayer surface of illite. The effect of NaCl on the surface areas was relatively small and may therefore be ignored. Both the 0.005 mol L-1 NaCl solution and deionised water could be used as a background solution for measurement of surface area of oxide-rich materials.

  10. Density and stability of soil organic carbon beneath impervious surfaces in urban areas.

    Science.gov (United States)

    Wei, Zongqiang; Wu, Shaohua; Yan, Xiao; Zhou, Shenglu

    2014-01-01

    Installation of impervious surfaces in urban areas has attracted increasing attention due to its potential hazard to urban ecosystems. Urban soils are suggested to have robust carbon (C) sequestration capacity; however, the C stocks and dynamics in the soils covered by impervious surfaces that dominate urban areas are still not well characterized. We compared soil organic C (SOC) densities and their stabilities under impervious surface, determined by a 28-d incubation experiment, with those in open areas in Yixing City, China. The SOC density (0-20 cm) under impervious surfaces was, on average, 68% lower than that in open areas. Furthermore, there was a significantly (Psoils, whereas the correlation was not apparent for the impervious-covered soils, suggesting that the artificial soil sealing in urban areas decoupled the cycle of C and N. Cumulative CO2-C evolved during the 28-d incubation was lower from the impervious-covered soils than from the open soils, and agreed well with a first-order decay model (Ct = C1+C0(1-e-kt)). The model results indicated that the SOC underlying capped surfaces had weaker decomposability and lower turnover rate. Our results confirm the unique character of urban SOC, especially that beneath impervious surface, and suggest that scientific and management views on regional SOC assessment may need to consider the role of urban carbon stocks.

  11. Dithiocarbamate Self-Assembled Monolayers as Efficient Surface Modifiers for Low Work Function Noble Metals.

    Science.gov (United States)

    Meyer, Dominik; Schäfer, Tobias; Schulz, Philip; Jung, Sebastian; Rittich, Julia; Mokros, Daniel; Segger, Ingolf; Maercks, Franziska; Effertz, Christian; Mazzarello, Riccardo; Wuttig, Matthias

    2016-09-06

    Tuning the work function of the electrode is one of the crucial steps to improve charge extraction in organic electronic devices. Here, we show that N,N-dialkyl dithiocarbamates (DTC) can be effectively employed to produce low work function noble metal electrodes. Work functions between 3.1 and 3.5 eV are observed for all metals investigated (Cu, Ag, and Au). Ultraviolet photoemission spectroscopy (UPS) reveals a maximum decrease in work function by 2.1 eV as compared to the bare metal surface. Electronic structure calculations elucidate how the complex interplay between intrinsic dipoles and dipoles induced by bond formation generates such large work function shifts. Subsequently, we quantify the improvement in contact resistance of organic thin film transistor devices with DTC coated source and drain electrodes. These findings demonstrate that DTC molecules can be employed as universal surface modifiers to produce stable electrodes for electron injection in high performance hybrid organic optoelectronics.

  12. Dithiocarbamate Self-Assembled Monolayers as Efficient Surface Modifiers for Low Work Function Noble Metals

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Dominik; Schäfer, Tobias; Schulz, Philip; Jung, Sebastian; Rittich, Julia; Mokros, Daniel; Segger, Ingolf; Maercks, Franziska; Effertz, Christian; Mazzarello, Riccardo; Wuttig, Matthias

    2016-09-06

    Tuning the work function of the electrode is one of the crucial steps to improve charge extraction in organic electronic devices. Here, we show that N,N-dialkyl dithiocarbamates (DTC) can be effectively employed to produce low work function noble metal electrodes. Work functions between 3.1 and 3.5 eV are observed for all metals investigated (Cu, Ag, and Au). Ultraviolet photoemission spectroscopy (UPS) reveals a maximum decrease in work function by 2.1 eV as compared to the bare metal surface. Electronic structure calculations elucidate how the complex interplay between intrinsic dipoles and dipoles induced by bond formation generates such large work function shifts. Subsequently, we quantify the improvement in contact resistance of organic thin film transistor devices with DTC coated source and drain electrodes. These findings demonstrate that DTC molecules can be employed as universal surface modifiers to produce stable electrodes for electron injection in high performance hybrid organic optoelectronics.

  13. Mobile Launch Platform Vehicle Assembly Area (SWMU 056) Biosparge Expansion Interim Measures Work Plan

    Science.gov (United States)

    Burcham, Michael S.; Daprato, Rebecca C.

    2016-01-01

    This document presents the design details for an Interim Measure (IM) Work Plan (IMWP) for the Mobile Launch Platform/Vehicle Assembly Building (MLPV) Area, located at the John F. Kennedy Space Center (KSC), Florida. The MLPV Area has been designated Solid Waste Management Unit Number 056 (SWMU 056) under KSC's Resource Conservation and Recovery Act (RCRA) Corrective Action Program. This report was prepared by Geosyntec Consultants (Geosyntec) for the National Aeronautics and Space Administration (NASA) under contract number NNK09CA02B and NNK12CA13B, project control number ENV1642. The Advanced Data Package (ADP) presentation covering the elements of this IMWP report received KSC Remediation Team (KSCRT) approval at the December 2015 Team Meeting; the meeting minutes are included in Appendix A.

  14. Conflict in Protected Areas: Who Says Co-Management Does Not Work?

    Science.gov (United States)

    De Pourcq, Kobe; Thomas, Evert; Arts, Bas; Vranckx, An; Léon-Sicard, Tomas; Van Damme, Patrick

    2015-01-01

    Natural resource-related conflicts can be extremely destructive and undermine environmental protection. Since the 1990 s co-management schemes, whereby the management of resources is shared by public and/or private sector stakeholders, have been a main strategy for reducing these conflicts worldwide. Despite initial high hopes, in recent years co-management has been perceived as falling short of expectations. However, systematic assessments of its role in conflict prevention or mitigation are non-existent. Interviews with 584 residents from ten protected areas in Colombia revealed that co-management can be successful in reducing conflict at grassroots level, as long as some critical enabling conditions, such as effective participation in the co-management process, are fulfilled not only on paper but also by praxis. We hope these findings will re-incentivize global efforts to make co-management work in protected areas and other common pool resource contexts, such as fisheries, agriculture, forestry and water management.

  15. Field-Emission from Chemically Functionalized Diamond Surfaces: Does Electron Affinity Picture Work?

    Science.gov (United States)

    Miyamoto, Yoshiyuki; Miyazaki, Takehide; Takeuchi, Daisuke; Okushi, Hideyo; Yamasaki, Satoshi

    2014-03-01

    By means of the time-dependent density functional electron dynamics, we have revisited the field-emission efficiency of chemically functionalized diamond (100) surfaces. In order to achieve high efficiency and high (chemical) stability, proper chemical species are needed to terminate diamond surfaces. Hydrogen (H) termination is well known to achieve the negative electron affinity (NEA) of diamond surface which indeed enhances field emission performance than that of clean surface with positive electron affinity (PEA). Yet, the durability of H-terminated diamond surface was concerned for long-time operation of the field-emission. Meantime, oxidation, or hydroxyl (OH) termination was considered to achieve chemical stability of the surface but presence of oxygen (O) atom should reduce the emission efficiency. Recently, H- OH-co-terminated surface is reported as NEA and was expected to achieve both emission efficiency and chemical stability. However, our simulation showed that emission efficiency of the H- OH- co-terminated surface is much lower than clean surface with PEA, thus we note that the electron affinity cannot be a unique measure to determine the emission efficiency. In this talk, we introduce necessity of new concept to understand the emission efficiency which needs to know detailed potential profile from bulk to vacuum through surface, which is strongly dependent on the surface chemical functionalization. This work was supported by ALCA project conducted by Japan Science and Technology Agency.

  16. Time function of surface subsidence based on Harris model in mined-out area

    Institute of Scientific and Technical Information of China (English)

    Liu Xinrong; Wang Junbao; Guo Jianqiang; Yuan Hong; Li Peng

    2013-01-01

    The surface subsidence is a common environmental hazard in mined-out area.Based on careful analysis of the regularity of surface subsidence in mined-out area,we proposed a new time function based on Harris curve model in consideration of the shortage of current surface subsidence time functions.By analyzing the characteristics of the new time function,we found that it could meet the dynamic process,the velocity change process and the acceleration change process during surface subsidence.Then its rationality had been verified through project cases.The results show that the proposed time function model can give a good reflection of the regularity of surface subsidence in mined-out area and can accurately predict surface subsidence.And the prediction data of the model are a little greater than measured data on condition of proper measured data quantity,which is safety in the engineering.This model provides a new method for the analysis of surface subsidence in mined-out area and reference for future prediction,and it is valuable to engineering application.

  17. Microscopic work function anisotropy and surface chemistry of 316L stainless steel using photoelectron emission microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, N., E-mail: nick.barrett@cea.fr [CEA, IRAMIS, SPEC, LENSIS, F-91191 Gif-sur-Yvette (France); Renault, O. [CEA, LETI, Minatec Campus, F-38054 Grenoble Cedex 09 (France); Lemaître, H. [Université de Cergy-Pontoise, Rue d’Eragny, Neuville sur Oise, 95 031 Cergy-Pontoise (France); Surface Dynamics Laboratory, Institut for Fysik og Astronomi Aarhus Universitet, Ny Munkegade 120, 8000 Aarhus C (Denmark); Bonnaillie, P. [CEA, DEN, DANS, DMN, SRMP, F-91191 Gif-sur-Yvette (France); Barcelo, F. [CEA, DEN, DANS, DMN, SRMA, LA2M, F-91191 Gif-sur-Yvette (France); Miserque, F. [CEA, DEN, DANS, DPC, SCCME, LECA, F-91191 Gif-sur-Yvette (France); Wang, M.; Corbel, C. [Laboratoire des Solides Irradis, Ecole Polytechnique, route de Saclay, F-91128 Palaiseau (France)

    2014-08-15

    Highlights: • PEEM and EBSD study of spatial variations in local work function of 316L steel. • Correlation between work function and crystal grain orientation at the surface of 316L steel. • Spatially resolved chemistry of residual oxide layer. - Abstract: We have studied the variation in the work function of the surface of sputtered cleaned 316L stainless steel with only a very thin residual oxide surface layer as a function of grain orientation using X-ray photoelectron emission microscopy (XPEEM) and Electron Backscattering Diffraction. The grains are mainly oriented [1 1 1] and [1 0 1]. Four distinct work function values spanning a 150 meV energy window are measured. Grains oriented [1 1 1] have a higher work function than those oriented [1 0 1]. From core level XPEEM we deduce that all grain surfaces are Cr enriched and Ni depleted whereas the Cr/Fe ratio is similar for all grains. The [1 1 1] oriented grains show evidence for a Cr{sub 2}O{sub 3} surface oxide and a higher concentration of defective oxygen sites.

  18. Effect of surface texture and working gap on the braking performance of the magnetorheological fluid brake

    Science.gov (United States)

    Wang, Na; Li, Dong Heng; Li Song, Wan; Chao Xiu, Shi; Zhi Meng, Xiang

    2016-10-01

    In this paper, the effect of the surface textures of braking disc on the braking performance is experimentally investigated under the conditions of different working gaps and applied currents. For this purpose, a new configuration of magnetorheological fluid brake (MRB) with adjustable working gap is developed to improve the manufacturing accuracy and cost, and to reduce the problem of replacing the braking disc. In addition, the braking discs with three types of surface texture are designed and machined. Based on the test bed developed for the proposed MRB, a series of experiments are carried out on the manufactured prototype and the results are presented to obtain the relationship among the surface texture of the braking disc, applied current, working gap and the braking performance. The results show that the braking torque is significantly influenced by the working gap and surface texture of the braking disc, and the maximum braking torque is obtained on the conditions of 0.25 mm working gap and the braking disc with square surface texture.

  19. [Atmospheric pollution and chronic respiratory diseases in the blast-furnace areas of iron-works].

    Science.gov (United States)

    Zannini, D; Valente, T; Rotunno, R; Giusto, R

    1977-01-01

    An epidemiologic research together with a study on the environmental pollution were carried out in order to evaluate the risk of chronic respiratory diseases of blast furnace workers. The environment study was performed mainly using personal samplers given to workers with different jobs. Observations on 222 work shifts have shown that the total dust concentration to which cast workmen, maintenance men and blast furnace service men were exposed, marginally exceed the TLV values. Furthermore the level of respirable dusts for blast furnace service men was found slightly excessive. The average SO2 concentration was largely below the TLV values. However this gas could be found in excess for very short periods during the work. The epidemiologic study, conducted on a cohort of blast furnace area workers against a control group cohort, indicated a moderate prevalence of pneumoconiosis and chronic bronchitis amongst blast furnaces workers. The clinic and radiological pictures do not seem to go beyond the initial stages.

  20. Gold-film coating assisted femtosecond laser fabrication of large-area, uniform periodic surface structures.

    Science.gov (United States)

    Feng, Pin; Jiang, Lan; Li, Xin; Rong, Wenlong; Zhang, Kaihu; Cao, Qiang

    2015-02-20

    A simple, repeatable approach is proposed to fabricate large-area, uniform periodic surface structures by a femtosecond laser. 20 nm gold films are coated on semiconductor surfaces on which large-area, uniform structures are fabricated. In the case study of silicon, cross-links and broken structures of laser induced periodic surface structures (LIPSSs) are significantly reduced on Au-coated silicon. The good consistency between the scanning lines facilitates the formation of large-area, uniform LIPSSs. The diffusion of hot electrons in the Au films increases the interfacial carrier densities, which significantly enhances interfacial electron-phonon coupling. High and uniform electron density suppresses the influence of defects on the silicon and further makes the coupling field more uniform and thus reduces the impact of laser energy fluctuations, which homogenizes and stabilizes large-area LIPSSs.

  1. Study of Social Problems and Working Conditions of Child Labourers in Rural Area of Wardha

    Directory of Open Access Journals (Sweden)

    Nimbarte Sanjay

    2010-06-01

    Full Text Available Children under fourteen constitute around 3.6% of the total labour force in India. The objective of the present study was to study the socio-economic determinants and to assess the working conditionsof child labourer in the small town Seloo area in Wardha district. The child labourers were interviewed in their work places using a predesigned and pre-tested questionnaire. Data was collected andanalyzed using epi_info 6.04d. A total of 150 child labourers participated in the study. The male/ female ratio was 1:1.77. Child labour was most prevalent (80% among 11-13 year age group.Child labour increases with decreasing parental socio-economic status. A little less than half (46.7% of the child labourers had to work for more than 6 hours a day. Average duration of work as 6.1days per week. There is need to protect children from child labour specially girl children. It is advocated that reduction in family size is condusive to promote economic empowerment/education.

  2. Surface area and volume measurements of volcanic ash particles by SEM stereoscopic imaging

    Science.gov (United States)

    Ersoy, Orkun

    2010-05-01

    Surface area of volcanic ash particles is of great importance to research including plume dynamics, particle chemical and water reactions in the plume, modelling (i.e. plume shape, particle interactions , dispersion etc.), remote sensing of transport and SO2, HCl, H2O, CO2 levels, forecasting plume location, and transportation and deposition of ash particles. The implemented method presented in this study offer new insights for surface characterization of volcanic ash particles on macro-pore regions. Surface area and volumes of volcanic ash particles were measured using digital elevation models (DEM) reconstructed from stereoscopic images acquired from different angles by scanning electron microscope (SEM). The method was tested using glycidyl methacrylate (GMA) micro-spheres which exhibit low spherical imperfections. The differences between measured and geometrically calculated surface areas were introduced for both micro-spheres and volcanic ash particles in order to highlight the probable errors in modelling on volcanic ash behaviour. The specific surface areas of volcanic ash particles using this method are reduced by half (from mean values of 0.045 m2/g to 0.021 m2/g) for the size increment 63 μm to 125 μm. Ash particles mostly have higher specific surface area values than the geometric forms irrespective of particle size. The specific surface area trends of spheres and ash particles resemble for finer particles (63 μm). Approximation to sphere and ellipsoid have similar margin of error for coarser particles (125 μm) but both seem to be inadequate for representation of real ash surfaces.

  3. The role of advanced reactive surface area characterization in improving predictions of mineral reaction rates

    Science.gov (United States)

    Beckingham, L. E.; Zhang, S.; Mitnick, E.; Cole, D. R.; Yang, L.; Anovitz, L. M.; Sheets, J.; Swift, A.; Kneafsey, T. J.; Landrot, G.; Mito, S.; Xue, Z.; Steefel, C. I.; DePaolo, D. J.; Ajo Franklin, J. B.

    2014-12-01

    Geologic sequestration of CO2 in deep sedimentary formations is a promising means of mitigating carbon emissions from coal-fired power plants but the long-term fate of injected CO2 is challenging to predict. Reactive transport models are used to gain insight over long times but rely on laboratory determined mineral reaction rates that have been difficult to extrapolate to field systems. This, in part, is due to a lack of understanding of mineral reactive surface area. Many models use an arbitrary approximation of reactive surface area, applying orders of magnitude scaling factors to measured BET or geometric surface areas. Recently, a few more sophisticated approaches have used 2D and 3D image analyses to determine mineral-specific reactive surface areas that account for the accessibility of minerals. However, the ability of these advanced surface area estimates to improve predictions of mineral reaction rates has yet to be determined. In this study, we fuse X-ray microCT, SEM QEMSCAN, XRD, SANS, and SEM-FIB analysis to determine mineral-specific accessible reactive surface areas for a core sample from the Nagaoka pilot CO2 injection site (Japan). This sample is primarily quartz, plagioclase, smectite, K-feldspar, and pyroxene. SEM imaging shows abundant smectite cement and grain coatings that decrease the fluid accessibility of other minerals. However, analysis of FIB-SEM images reveals that smectite nano-pores are well connected such that access to underlying minerals is not occluded by smectite coatings. Mineral-specific accessible surfaces are determined, accounting for the connectivity of the pore space with and without connected smectite nano-pores. The large-scale impact of variations in accessibility and dissolution rates are then determined through continuum scale modeling using grid-cell specific information on accessible surface areas. This approach will be compared with a traditional continuum scale model using mineral abundances and common surface area

  4. The impact of surface area, volume, curvature, and Lennard-Jones potential to solvation modeling.

    Science.gov (United States)

    Nguyen, Duc D; Wei, Guo-Wei

    2017-01-05

    This article explores the impact of surface area, volume, curvature, and Lennard-Jones (LJ) potential on solvation free energy predictions. Rigidity surfaces are utilized to generate robust analytical expressions for maximum, minimum, mean, and Gaussian curvatures of solvent-solute interfaces, and define a generalized Poisson-Boltzmann (GPB) equation with a smooth dielectric profile. Extensive correlation analysis is performed to examine the linear dependence of surface area, surface enclosed volume, maximum curvature, minimum curvature, mean curvature, and Gaussian curvature for solvation modeling. It is found that surface area and surfaces enclosed volumes are highly correlated to each other's, and poorly correlated to various curvatures for six test sets of molecules. Different curvatures are weakly correlated to each other for six test sets of molecules, but are strongly correlated to each other within each test set of molecules. Based on correlation analysis, we construct twenty six nontrivial nonpolar solvation models. Our numerical results reveal that the LJ potential plays a vital role in nonpolar solvation modeling, especially for molecules involving strong van der Waals interactions. It is found that curvatures are at least as important as surface area or surface enclosed volume in nonpolar solvation modeling. In conjugation with the GPB model, various curvature-based nonpolar solvation models are shown to offer some of the best solvation free energy predictions for a wide range of test sets. For example, root mean square errors from a model constituting surface area, volume, mean curvature, and LJ potential are less than 0.42 kcal/mol for all test sets. © 2016 Wiley Periodicals, Inc.

  5. Brain cortical thickness and surface area correlates of neurocognitive performance in patients with schizophrenia, bipolar disorder, and healthy adults.

    Science.gov (United States)

    Hartberg, C B; Sundet, K; Rimol, L M; Haukvik, U K; Lange, E H; Nesvåg, R; Dale, A M; Melle, I; Andreassen, O A; Agartz, I

    2011-11-01

    Relationships between cortical brain structure and neurocognitive functioning have been reported in schizophrenia, but findings are inconclusive, and only a few studies in bipolar disorder have addressed this issue. This is the first study to directly compare relationships between cortical thickness and surface area with neurocognitive functioning in patients with schizophrenia (n = 117) and bipolar disorder (n = 121) and healthy controls (n = 192). MRI scans were obtained, and regional cortical thickness and surface area measurements were analyzed for relationships with test scores from 6 neurocognitive domains. In the combined sample, cortical thickness in the right rostral anterior cingulate was inversely related to working memory, and cortical surface area in four frontal and temporal regions were positively related to neurocognitive functioning. A positive relationship between left transverse temporal thickness and processing speed was specific to schizophrenia. A negative relationship between right temporal pole thickness and working memory was specific to bipolar disorder. In conclusion, significant cortical structure/function relationships were found in a large sample of healthy controls and patients with schizophrenia or bipolar disorder. The differences that were found between schizophrenia and bipolar may indicate differential relationship patterns in the two disorders, which may be of relevance for understanding the underlying pathophysiology.

  6. The configuration of water on rough natural surfaces: Implications for understanding air-water interfacial area, film thickness, and imaging resolution

    Science.gov (United States)

    Kibbey, Tohren C. G.

    2013-08-01

    Previous studies of air-water interfacial areas in unsaturated porous media have often distinguished between interfacial area corresponding to water held by capillary forces between grains and area corresponding to water associated with solid surfaces. The focus of this work was on developing a better understanding of the nature of interfacial area associated with solid surfaces following drainage of porous media. Stereoscopic scanning electron microscopy was used to determine surface elevation maps for eight different surfaces of varying roughness. An algorithm was developed to calculate the true configuration of an air-water interface in contact with the solid surface as a function of capillary pressure. The algorithm was used to calculate surface-associated water configurations for capillary pressures ranging from 10 to 100 cm water. The results of the work show that, following drainage, the configuration of surface-associated water is dominated by bridging of macroscopic surface roughness features over the range of capillary pressures studied, and nearly all of the surface-associated water is capillary held. As such, the thicknesses of surface-associated water were found to be orders-of-magnitude greater than might be expected at the same capillary pressures based on calculations of adsorbed film thickness. The fact that capillary forces in air-water interfaces dominate surface-associated water configuration means that interface shapes are largely unaffected by microscopic surface roughness, and interfaces are considerably smoother than the underlying solid. As such, calculations suggest that microscopic surface roughness likely has minimal impact on the accuracy of surface-associated air-water interfacial areas determined by limited-resolution imaging methods such as computed microtomography.

  7. Preparation, Surface and Pore Structure of High Surface Area Activated Carbon Fibers from Bamboo by Steam Activation

    Directory of Open Access Journals (Sweden)

    Xiaojun Ma

    2014-06-01

    Full Text Available High surface area activated carbon fibers (ACF have been prepared from bamboo by steam activation after liquefaction and curing. The influences of activation temperature on the microstructure, surface area and porosity were investigated. The results showed that ACF from bamboo at 850 °C have the maximum iodine and methylene blue adsorption values. Aside from the graphitic carbon, phenolic and carbonyl groups were the predominant functions on the surface of activated carbon fiber from bamboo. The prepared ACF from bamboo were found to be mainly type I of isotherm, but the mesoporosity presented an increasing trend after 700 °C. The surface area and micropore volume of samples, which were determined by application of the Brunauer-Emmett-Teller (BET and t-plot methods, were as high as 2024 m2/g and 0.569 cm3/g, respectively. It was also found that the higher activation temperature produced the more ordered microcrystalline structure of ACF from bamboo.

  8. Remedial investigation concept plan for the groundwater operable units at the chemical plant area and the ordnance works area, Weldon Spring, Missouri

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-15

    The U.S. Department of Energy (DOE) and the U.S. Department of the Army (DA) are conducting cleanup activities at two properties--the DOE chemical plant area and the DA ordnance works area (the latter includes the training area)--located in the Weldon Spring area in St. Charles County, Missouri. These areas are on the National Priorities List (NPL), and cleanup activities at both areas are conducted in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), as amended. DOE and DA are conducting a joint remedial investigation (RI) and baseline risk assessment (BRA) as part of the remedial investigation/feasibility study (RI/FS) for the groundwater operable units for the two areas. This joint effort will optimize further data collection and interpretation efforts and facilitate overall remedial decision making since the aquifer of concern is common to both areas. A Work Plan issued jointly in 1995 by DOE and the DA discusses the results of investigations completed at the time of preparation of the report. The investigations were necessary to provide an understanding of the groundwater system beneath the chemical plant area and the ordnance works area. The Work Plan also identifies additional data requirements for verification of the evaluation presented.

  9. Description of surface systems. Preliminary site description. Forsmark area Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias (ed.)

    2005-06-01

    Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

  10. Estimating surface fluxes over the north Tibetan Plateau area with ASTER imagery

    Directory of Open Access Journals (Sweden)

    Weiqiang Ma

    2009-01-01

    Full Text Available Surface fluxes are important boundary conditions for climatological modeling and Asian monsoon system. The recent availability of high-resolution, multi-band imagery from the ASTER (Advanced Space-borne Thermal Emission and Reflection radiometer sensor has enabled us to estimate surface fluxes to bridge the gap between local scale flux measurements using micrometeorological instruments and regional scale land-atmosphere exchanges of water and heat fluxes that are fundamental for the understanding of the water cycle in the Asian monsoon system. A parameterization method based on ASTER data and field observations has been proposed and tested for deriving surface albedo, surface temperature, Normalized Difference Vegetation Index (NDVI, Modified Soil Adjusted Vegetation Index (MSAVI, vegetation coverage, Leaf Area Index (LAI, net radiation flux, soil heat flux, sensible heat flux and latent heat flux over heterogeneous land surface in this paper. As a case study, the methodology was applied to the experimental area of the Coordinated Enhanced Observing Period (CEOP Asia-Australia Monsoon Project (CAMP on the Tibetan Plateau (CAMP/Tibet, located at the north Tibetan Plateau. The ASTER data of 24 July 2001, 29 November 2001 and 12 March 2002 was used in this paper for the case of summer, winter and spring. To validate the proposed methodology, the ground-measured surface variables (surface albedo and surface temperature and land surface heat fluxes (net radiation flux, soil heat flux, sensible heat flux and latent heat flux were compared to the ASTER derived values. The results show that the derived surface variables and land surface heat fluxes in three different months over the study area are in good accordance with the land surface status. Also, the estimated land surface variables and land surface heat fluxes are in good accordance with ground measurements, and all their absolute percentage difference (APD is less than 10% in the validation sites

  11. Pore scale heterogeneity in the mineral distribution and reactive surface area of rocks

    Science.gov (United States)

    Lai, P. E.; Krevor, S. C.

    2013-12-01

    There are long-standing challenges in characterizing reactive transport in porous media at scales larger than individual pores. This hampers the prediction of the field-scale impact of geochemical processes on fluid flow [1]. This is a source of uncertainty for CO2 injection, which results in a reactive fluid-rock system, particularly in carbonate rock reservoirs. A potential cause is the inability of the continuum approach to incorporate the impact of heterogeneity in pore-scale reaction rates. This results in part from pore-scale heterogeneities in surface area of reactive minerals [2,3]. In this study we have created μm resolution 3D images of 3 sandstone and 4 carbonate rocks using x-ray microtomography. Using in-house image processing techniques and auxiliary characterisation with thin section, electron microscope and spectroscopic techniques we quantified the surface area of each mineral phase in the x-ray CT images. This quantification was validated against N2 BET surface area and He porosity measurements of the imaged samples. Distributions in reactive surface area for each mineral phase were constructed by calculating surface areas in thousands of randomly selected subvolume images of the total sample, each normalized to the pore volume in that image. In all samples, there is little correlation between the reactive surface area fraction and the volumetric fraction of a mineral in a bulk rock. Berea sandstone was far less heterogeneous and has a characteristic pore size at which a surface area distribution may be used to quantify heterogeneity. In carbonates, heterogeneity is more complex and surface area must be characterized at multiple length scales for an accurate description of reactive transport. [1] Maher, Steefel, Depaolo and Vianni (2006) Geochimica et Cosmochimica Acta, 70, 337-363 [2] Landrot, Ajo-Franklin, Yang, Cabrini and Steefel (2012) Chemical Geology 318-319, 113-125 [3] Li, Peters and Celia (2007) American Journal of Science 307, 1146

  12. High temperature oxidation behavior of AISI 304L stainless steel-Effect of surface working operations

    Science.gov (United States)

    Ghosh, Swati; Kumar, M. Kiran; Kain, Vivekanand

    2013-01-01

    The oxidation behavior of grade 304L stainless steel (SS) subjected to different surface finishing (machining and grinding) operations was followed in situ by contact electric resistance (CER) and electrochemical impedance spectroscopy (EIS) measurements using controlled distance electrochemistry (CDE) technique in high purity water (conductivity electrochemical properties and distinct morphological features of the oxide layer as a result of surface working were attributed to the prevalence of heavily fragmented grain structure and presence of martensite.

  13. Estimating the global surface area of rivers and streams using satellite imagery

    Science.gov (United States)

    Allen, George; Pavelsky, Tamlin

    2017-04-01

    Global observational assessments of river and stream systems are based largely on gauge station data, which are fragmented and often limited to country-level statistics. This limitation severely impedes our understanding of global-scale hydrologic, geomorphic, and biogeochemical fluvial processes. In contrast, satellite remote sensing data provide a globally-consistent and spatially-continuous tool for studying rivers. Here we present a novel method estimate the total surface area of all rivers and stream globally using measurements from the recently-developed Global River Widths from Landsat (GRWL) database and field surveys. The surface area of rivers and streams is a key model parameter in global evaluations of greenhouse gas emissions from inland waters. Preliminary analysis suggests that rivers occupy a total area of 80 thousand square kilometers, or 0.58% of Earth's land surface. This result is 30% greater than the previous best estimate that is based on digital elevation models and gauge station measurements. Compared to previous regional assessments, we find that rivers and streams occupy a greater proportion of the land surface in the arctic and in the tropics, and a lower proportion of land surface in the United States and in Europe. Our results suggest that current estimates of greenhouse gas emissions from inland waters should be revised upwards to account for the greater abundance of river and stream surface area.

  14. Surface Area of Patellar Facets: Inferential Statistics in the Iraqi Population

    Directory of Open Access Journals (Sweden)

    Ahmed Al-Imam

    2017-01-01

    Full Text Available Background. The patella is the largest sesamoid bone in the body; its three-dimensional complexity necessitates biomechanical perfection. Numerous pathologies occur at the patellofemoral unit which may end in degenerative changes. This study aims to test the presence of statistical correlation between the surface areas of patellar facets and other patellar morphometric parameters. Materials and Methods. Forty dry human patellae were studied. The morphometry of each patella was measured using a digital Vernier Caliper, electronic balance, and image analyses software known as ImageJ. The patellar facetal surface area was correlated with patellar weight, height, width, and thickness. Results. Inferential statistics proved the existence of linear correlation of total facetal surface area and patellar weight, height, width, and thickness. The correlation was strongest for surface area versus patellar weight. The lateral facetal area was found persistently larger than the medial facetal area, the p value was found to be <0.001 (one-tailed t-test for right patellae, and another significant p value of < 0.001 (one-tailed t-test was found for left patellae. Conclusion. These data are vital for the restoration of the normal biomechanics of the patellofemoral unit; these are to be consulted during knee surgeries and implant designs and can be of an indispensable anthropometric, interethnic, and biometric value.

  15. Can We Trust Real Time Measurements of Lung Deposited Surface Area Concentrations in Dust from Powder Nanomaterials?

    DEFF Research Database (Denmark)

    Levin, Marcus; Witschger, Olivier; Bau, Sebastien

    2016-01-01

    A comparison between various methods for real-time measurements of lung deposited surface area (LDSA) using spherical particles and powder dust with specific surface area ranging from 0.03 to 112 m2 g-1 was conducted. LDSA concentrations measured directly using Nanoparticle Surface Area Monitor (...

  16. Work.

    Science.gov (United States)

    Haines, Annette M.

    2003-01-01

    Draws upon Maria Montessori's writings to examine work as a universal human tendency throughout life. Discusses the work of adaptation of the infant, work of "psycho-muscular organism" for the preschooler, work of the imagination for the elementary child, community work of the adolescent, and work of the adult. Asserts that…

  17. CO emission in the air return corner of the working face in shallow burial mining areas

    Institute of Scientific and Technical Information of China (English)

    Botao Qin; Yi Lu; Yuwei Jia

    2014-01-01

    In shallow burial mining areas, abnormal CO emission and the spontaneous combustion of coal are great threats to safety production at a fully-mechanised working face. In order to prevent the CO concentration in the air return corner from exceeding the critical limit, the paper studied the CO emission regularity and characteristics through theoretical analysis, experimental research and field observation. The results show that the main sources of CO emission were the spontaneous combustion of coal in the goaf and the exhaust emissions coming from underground motorised vehicles. The effect factors of CO emission were also investigated, such as seasonal climate changes, the advancing distance and advancing speed of the working face, the number of underground motorised vehicles and some other factors. In addition to these basic analyses, the influence mechanism of each influence factor was also summarised theoret-ically. Finally, this study researched the distribution and change law of CO concentration in the fully-mechanised working face in two aspects: controlling the change of monitoring points and time respectively. The research results provide a theoretical basis for preventing the CO concentration from exceeding the critical limit in the air return corner and reducing the possibility of spontaneous combus-tion of coal. Additionally, the results also provide important theoretical and practical guidelines for pro-tecting miners’ health in modern mines featuring high production and high efficiency all over the world.

  18. [Life-style of medical personnel dwelling and working in agroindustrial area].

    Science.gov (United States)

    Sorokina, M G; Kamaev, I A

    2005-01-01

    Results of sociological survey of medical personnel of typical agroindustrial area of Novgorod Oblast are presented. Data of self-registration of acute and chronic diseases and self-appraisal of one's health testify higher morbidity and health deterioration during last 3 years. Analysis of demographic characteristics, life-styles and labor conditions revealed complex of major factors impacting individual health and flow-out of professional medical personnel. Both amount of average monthly wage of physicians and paramedics, levels of their family income and welfare and as well degree of their inconsistence with cost of living of able-bodied population are established. Conditions of living and social maintenance, labor and off-labor activity, attitude to one's own health and spread of risk factors were analyzed. Management weaknesses of district and rural patient care institutions were established, including considerable exceeding of hygienic regulations established for medical personnel working load and higher spread of physical, chemical and biological risk factors of working environment harmful for health. Need in further enhancement of management of working process, occupational safety, labor remuneration and in increasing social safety, hygienic and curative activity of medical personnel is justified.

  19. Influence of Conditioned Surface Textures on Plain Journal Bearing Performance Working on HL Conditions

    OpenAIRE

    Vélez-Restrepo J.M.; Toro-Botero F.M.; Suárez-Bustamante F.A.

    2012-01-01

    As an answer to the need for reducing friction losses on bearings, dynamic seals, piston rings, cutting tools and others, a lot of work has been dedicated to mechanical systems study whose surfaces have been textured in a controlled way. Theoretical models and experimental results have shown improvements on the tribological performance of these systems regarding untextured systems, working under the same conditions. This paper presents a numerical model for getting relationships among the ope...

  20. Simulation Of Surface runoff For Upper Tapi Subcatchment Area (Burhanpur Watershed) Using SWAT

    Science.gov (United States)

    Shivhare, V.; Goel, M. K.; Singh, C. K.

    2014-11-01

    Water related activity that takes place in one part of a river basin may have consequence in the other part. Any plan related to inter basin transfer of water from a water surplus basin to a deficit basin has to take into account the water availability and demands under the present and future scenarios of water use. Watershed is a hydrologic unit where all stream exit from the common outlet. In the present study, Tapi subcatchment area (Burhanpur watershed) located in inter-state basin of Madhya Pradesh and Maharashtra, India, is selected for the estimation of surface runoff using SWAT model. The SWAT works in conjunction with Arc GIS 9.3. Various parameters Digital Elevation Model (DEM), slope derived from DEM, Landuse/Landcover (LULC) and NBSSLUP soil data and temporal data for temperature and precipitation was used as input for the model to predict runoff at the catchment outlet. The model was run from the year 1992 to 1997. The performance of the model in terms of simulated runoff was evaluated using statistical method and compared simulated monthly flow with the observed monthly flow values from 1992 to 1996 to a significant extent. The coefficient of determination (R2) for the monthly runoff values for 1992 to 1996 was observed to be 0.82, 0.68, 0.92, 0.69.

  1. In situ measurement of active catalyst surface area in fuel cell stacks

    Science.gov (United States)

    Brightman, E.; Hinds, G.; O'Malley, R.

    2013-11-01

    Measurement of electrochemical surface area (ECSA) of fuel cell electrodes is a key diagnostic of performance and gives a useful parameter for monitoring degradation and state of health in polymer electrolyte membrane fuel cells (PEMFCs). However, conventional methods for determining ECSA require potentiostatic control of the cell, which is impractical in a fuel cell stack. Here we demonstrate for the first time the practical application of a galvanostatic technique that enables in situ monitoring of ECSA in each cell throughout the lifetime of a stack. The concept is demonstrated at single cell level using both H adsorption and CO stripping, and the H adsorption (cathodic current) method is extended to stack testing. The undesirable effects of H2 crossover on the measurement may be minimised by appropriate selection of current density and by working with dilute H2 on the anode electrode. Good agreement is achieved with ECSA values determined using conventional single cell voltammetry across a range of MEA designs. The technique is straightforward to implement and provides an invaluable tool for state of health monitoring during PEMFC stack lifetime studies.

  2. Geohydrology and susceptibility of major aquifers to surface contamination in Alabama; area 4

    Science.gov (United States)

    Planert, Michael; Pritchett, J.L.

    1989-01-01

    The U.S. Geological Survey, in cooperation with the Alabama Department of Environmental Management, is conducting a series of geohydrologic studies to delineate the major aquifers (those which provide water for public supplies) in Alabama, their recharge areas, and areas susceptible to contamination. This report summarizes these factors for two major aquifers in Area 4--Calhoun, Jefferson, St. Clair, Shelby, and Talladega Counties. The major aquifers in the study area are in Cambrian and Ordovician and Mississippian rocks. Highest yields from aquifers are associated with solution openings in carbonate rocks. Springs in the area provide substantial amounts of water for municipal supply. Coldwater Spring provides 17 million gal of water/day to the city of Anniston, the largest groundwater user in the area. All recharge areas for the aquifers are susceptible to contamination from land surface. Two conditions exist in the study area that may cause the aquifers to be highly susceptible to contamination on a local scale: fracturing of rock materials due to faulting and the production of a porous cherty soil through weathering. Where sinkholes are present, there may be a direct connection between the land surface and the aquifer. Areas with sinkholes are considered to be extremely susceptible to contamination. (USGS)

  3. The study of pervious concrete mix proportion by the method of specific surface area of aggregate

    Science.gov (United States)

    Xiao, Liguang; Jiang, Dawei

    2017-09-01

    The purpose of this paper is to solve the shortcoming of the mix proportion of pervious concrete. So we have done the research on the measurement of the specific surface area of aggregate, and the research on the volume change of cement after hydration, and the research on the best water-binder ratio and thickness of gelled material package. The experimental results show that the equivalent method is more accurate for measuring the specific surface area of aggregate. It can better reflect the specific surface area of aggregate. Moreover, the calculation method of the mix proportion of the cementing material can improve the utilization ratio of material and the quality of pervious concrete.

  4. APPLICATION OF HIERARCHY ARTIFICIAL NEURAL NETWORK TO EVALUATE THE EXPLOITATION CONDITITONS OF SURFACE MINING AREA

    Institute of Scientific and Technical Information of China (English)

    李新春; 范力军

    1998-01-01

    It always adopts the direct hierarchy analysis to value the exploitation conditions of surface mining areas. This way has some unavoidable shortcomings because it is mainly under theaid of experts and it is affected by the subjective thinking of the experts. This paper puts forwards a new approach that divides the whole exploitation conditions into sixteen subsidiary systems and each subsidiary system forms a neural network system. The whole decision system of exploitation conditions of surface mining areas is composed of sixteen subsidiary neural network systems. Each neural network is practiced with the data of the worksite, which is reasonable and scientific. This way will be a new decision approach for exploiting the surface mining areas.

  5. Don’t Work, Work at Home, or Commute? Discrete Choice Models of the Decision for San Francisco Bay Area Residents

    OpenAIRE

    Ory, D T; Mokhtarian, Patricia L

    2005-01-01

    Using socio-demographic, personality, and attitudinal data from 1,680 residents of the San Francisco Bay Area, we develop and estimate binary, multinomial, and nested logit models of the choice to work or not, whether or not to work at home, and whether to commute all of the time or some of the time (either by only working part time, or by working a compressed work week, or by telecommuting some of the time). To our knowledge, these are the first models of all these choices simultaneously. Th...

  6. Government conservation policies on Mexican coastal areas: is "top-down" management working?

    Science.gov (United States)

    Nava, Héctor; Ramírez-Herrera, M Teresa

    2011-12-01

    . Current conditions are the result of "top-down" conservation strategies in Zihuatanejo, as Federal and Municipal authorities do not coordinate, disregard local community in coral reef management, and ignore the intimate relationship between the coastal and marine realms. This work confirms the importance of conservation strategies with a holistic approach, considering both terrestrial and marine ecosystems in coastal areas; and that these initiatives should include local coastal communities in management and decision-taking processes done by government authorities.

  7. Government conservation policies on Mexican coastal areas: is "top-down" management working?

    Directory of Open Access Journals (Sweden)

    Héctor Nava

    2011-12-01

    . Current conditions are the result of "top-down" conservation strategies in Zihuatanejo, as Federal and Municipal authorities do not coordinate, disregard local community in coral reef management, and ignore the intimate relationship between the coastal and marine realms. This work confirms the importance of conservation strategies with a holistic approach, considering both terrestrial and marine ecosystems in coastal areas; and that these initiatives should include local coastal communities in management and decision-taking processes done by government authorities. Rev. Biol. Trop. 59 (4: 1487-1501. Epub 2011 December 01.

  8. Correlating Humidity-Dependent Ionically Conductive Surface Area with Transport Phenomena in Proton-Exchange Membranes

    Energy Technology Data Exchange (ETDEWEB)

    He, Qinggang; Kusoglu, Ahmet; Lucas, Ivan T.; Clark, Kyle; Weber, Adam Z.; Kostecki, Robert

    2011-08-01

    The objective of this effort was to correlate the local surface ionic conductance of a Nafion? 212 proton-exchange membrane with its bulk and interfacial transport properties as a function of water content. Both macroscopic and microscopic proton conductivities were investigated at different relative humidity levels, using electrochemical impedance spectroscopy and current-sensing atomic force microscopy (CSAFM). We were able to identify small ion-conducting domains that grew with humidity at the surface of the membrane. Numerical analysis of the surface ionic conductance images recorded at various relative humidity levels helped determine the fractional area of ion-conducting active sites. A simple square-root relationship between the fractional conducting area and observed interfacial mass-transport resistance was established. Furthermore, the relationship between the bulk ionic conductivity and surface ionic conductance pattern of the Nafion? membrane was examined.

  9. WORK RELATED INJURIES AMONG FISHERMEN – A DESCRIPTIVE STUDY IN FEW COASTAL AREAS OF SOUTH INDIA

    Directory of Open Access Journals (Sweden)

    Swathi

    2016-03-01

    Full Text Available INTRODUCTION The work of fishermen is considered one of the most dangerous and life-threatening professions all over the world.4 Many fishermen around the world suffer from fatal injuries every year due to harsh and dangerous environments. Hence, there is a need to know the pattern of injury and accordingly design preventive measures against work related injuries among the fishermen. OBJECTIVES  To estimate the prevalence and pattern of work related injuries among Fishermen.  To study the usage of PPE’s (Personal protective equipment’s among the Fishermen. METHODOLOGY A cross sectional study was conducted among 133 Fishermen in Four rural field practice areas of K. S. Hegde Medical Academy from July – September 2015. The sample size was arrived using prevalence of previous study. The data was analyzed using SPSS version 16 software. RESULTS Among 133 study subjects 125 were males and 8 were females. The mean age of the study subjects was 44 years. Majority (75.1% of them had their education up to primary level. Around 92.2% of the fishermen experienced some or other type of injury in their life time. Majority of the injuries were due to cuts. Majority (85.5% of the injuries were minor and 14.5% were severe. In the past 6 months 41% of the fishermen experienced injury mostly due to cuts and muscle strain. Most (58% of the injuries occurred in the sea. Only 11.7% were using PPEs, 64.7% of them had insurance and 27.1% of them utilized the facility of insurance. CONCLUSIONS Work related injuries among fishermen were high in and use of PPEs were low among the study subjects.

  10. Influence of Alkali Treatment on the Surface Area of Aluminium Dross

    OpenAIRE

    N. S. Ahmad Zauzi; Zakaria, M. Z. H.; R. Baini; Rahman, M. R.; N. Mohamed Sutan; Hamdan, S.

    2016-01-01

    Aluminium dross is an industrial waste from aluminium refining industry and classified as toxic substances. However, the disposal of dross as a waste is a burden to aluminium manufacturer industries due to its negative effects to the ecosystem, surface, and ground water. Therefore the purpose of this study is to evaluate the influence of sodium hydroxide (NaOH) on the surface area and pore size of aluminium dross. There were 3 stages in the treatment activities, which were leaching, precipita...

  11. Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias (ed.)

    2005-03-01

    Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions.

  12. Heavy metal contamination in surface runoff sediments of the urban area of Vilnius, Lithuania

    Directory of Open Access Journals (Sweden)

    Gytautas Ignatavičius

    2017-02-01

    Full Text Available Surface runoff from urbanized territories carries a wide range of pollutants. Sediments in untreated runoff from direct discharge stormwater systems significantly contribute to urban waterway pollution. In this study, heavy metal (Pb, Zn, Cu, Cr, Ba, As and Fe contamination in surface runoff sediments of the urban area of the city of Vilnius was investigated. The surface runoff sediment samples were collected from seven dischargers with the highest volume rate of water flow and concentrations of suspended solids. The geospatial analysis of the distribution of heavy metals shows that there are several active pollution sources supplying the dischargers with contaminated sediments. Most of these areas are located in the central part of the city and in old town with intense traffic. Principal components analysis and t-test results clearly depicted the significantly different chemical compositions of winter and autumn surface sediment samples. The sampling approach and assessment of results provide a useful tool to examine the contamination that is generated in urban areas, distinguish pollution sources and give a better understanding of the importance of permeable surfaces and green areas.

  13. Changes in surface area and concentrations of semivolatile organic contaminants in aging snow.

    Science.gov (United States)

    Burniston, Debbie A; Strachan, William J M; Hoff, John T; Wania, Frank

    2007-07-15

    During the winter of 1999/2000 five snowpacks at Turkey Lake Watershed east of Lake Superior were sampled immediately after falling and again after several days of aging for the analysis of specific snow surface area and the concentrations of organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs). The snow surface could be determined with a relative coefficient of variation of 6% using frontal chromatography, measuring the retention of ethyl acetate, a substance with known adsorption coefficient on the ice surface. The snow surface area of fresh snow varied from 1000 to 1330 cm2/g and was higher for snow falling during colder days. The aged snow samples had consistently lower surface areas ranging from 520 to 780 cm2/g, corresponding to an average loss of half of the initial surface area during aging. The rate of loss of surface area was faster at higher temperatures. Dieldrin, alpha-HCH, and gamma-HCH were the most abundant OCPs in snowmelt water, but endosulfan, chlordane-related substances, heptachlor epoxide, pp'-DDT, pp'-DDE, and chlorinated benzenes were also consistently present. Three midwinter snowpacks that aged during relatively cold temperatures generally experienced a loss of PCBs and OCPs that was of the same order of magnitude as the observed loss of snow surface area. However, no relationship between the extent of loss and the strength of a contaminants' sorption to snow was apparent. Few significant changes in snowpack concentrations of OCPs and PCBs were observed in a snowpack that fell at relatively high temperatures and aged under colder conditions. Concentrations of OCPs and PCBs increased in a late-winter snowpack that aged while temperatures rapidly increased to above freezing. Concentrations of pp'-DDE and endosulfan-II that increased in snowpacks that saw simultaneous decreases in the levels of pp'-DDT and endosulfan-I hint at the occurrence of sunlight induced conversions in snow. While surface area decreases clearly

  14. A process to enhance the specific surface area and capacitance of hydrothermally reduced graphene oxide

    KAUST Repository

    Alazmi, Amira

    2016-08-26

    The impact of post-synthesis processing in reduced graphene oxide materials for supercapacitor electrodes has been analyzed. A comparative study of vacuum, freeze and critical point drying was carried out for hydrothermally reduced graphene oxide demonstrating that the optimization of the specific surface area and preservation of the porous network are critical to maximize its supercapacitance performance. As described below, using a supercritical fluid as the drying medium, unprecedented values of the specific surface area (364 m2 g−1) and supercapacitance (441 F g−1) for this class of materials have been achieved.

  15. Dye-Sensitized Solar Cells Based on High Surface Area Nanocrystalline Zinc Oxide Spheres

    Directory of Open Access Journals (Sweden)

    Pavuluri Srinivasu

    2011-01-01

    Full Text Available High surface area nanocrystalline zinc oxide material is fabricated using mesoporous nanostructured carbon as a sacrificial template through combustion process. The resulting material is characterized by XRD, N2 adsorption, HR-SEM, and HR-TEM. The nitrogen adsorption measurement indicates that the materials possess BET specific surface area ca. 30 m2/g. Electron microscopy images prove that the zinc oxide spheres possess particle size in the range of 0.12 μm–0.17 μm. The nanocrystalline zinc oxide spheres show 1.0% of energy conversion efficiency for dye-sensitized solar cells.

  16. Preparation of Zirconia-Ceria Powders with High Specific Surface Area

    Institute of Scientific and Technical Information of China (English)

    Wang Enguo; Mei Fang

    2004-01-01

    Zirconia-ceria mixed oxide powders were prepared by high temperature aging method.The effects of the temperature and the time of aging, cerium content and calcination on powder performance were studied.The result shows that high temperature aging is an efficient way of preparation of ZrO2-CeO2 mixed oxide powders with high specific surface area and good thermal stability, and that addition of a small amount of cerium to hydrous zirconia can promote the preparation of high specific surface area powders.

  17. Laser Carbonization of PAN-Nanofiber Mats with Enhanced Surface Area and Porosity.

    Science.gov (United States)

    Go, Dennis; Lott, Philipp; Stollenwerk, Jochen; Thomas, Helga; Möller, Martin; Kuehne, Alexander J C

    2016-10-17

    Here we present a novel laser process to generate carbon nanofiber nonwovens from polyacrylonitrile. We produce carbon nanofabrics via electrospinning followed by infrared laser-induced carbonization, facilitating high surface area and well-controlled hierarchical porosity. The process allows precise control of the carbonization conditions and provides high nanoscale porosity. In comparison with classical thermal carbonization, the laser process produces much higher surface areas and smaller pores. Furthermore, we investigate the carbonization performance and the morphology of polyacrylonitrile nanofibers compounded with graphene nanoplatelet fillers.

  18. Pore Scale Heterogeneity in the Mineral Distribution, Surface Area and Adsorption in Porous Rocks

    Science.gov (United States)

    Lai, P. E. P.; Krevor, S. C.

    2014-12-01

    The impact of heterogeneity in chemical transport and reaction is not understood in continuum (Darcy/Fickian) models of reactive transport. This is manifested in well-known problems such as scale dependent dispersion and discrepancies in reaction rate observations made at laboratory and field scales [1]. Additionally, this is a source of uncertainty for carbon dioxide injection, which produces a reactive fluid-rock system particularly in carbonate rock reservoirs. A potential cause is the inability of the continuum approach to incorporate the impact of heterogeneity in pore-scale reaction rates. This results in part from pore-scale heterogeneities in surface area of reactive minerals [2, 3]. We use x-ray micro tomography to describe the non-normal 3-dimensional distribution of reactive surface area within a porous medium according to distinct mineral groups. Using in-house image processing techniques, thin sections, nitrogen BET surface area, backscattered electron imaging and energy dispersive spectroscopy, we compare the surface area of each mineral phase to those obtained from x-ray CT imagery. In all samples, there is little correlation between the reactive surface area fraction and the volumetric fraction of a mineral in a bulk rock. Berea sandstone was far less heterogeneous and has a characteristic pore size at which a surface area distribution may be used to quantify heterogeneity. In carbonates, heterogeneity is more complex and surface area must be characterized at multiple length scales for an accurate description of reactive transport. We combine the mineral specific surface area characterisation to dynamic tomography, imaging the flow of water and solutes, to observe flow dependent and mineral specific adsorption. The observations may contribute to the incorporation of experimentally based statistical descriptions of pore scale heterogeneity in reactive transport into upscaled models, moving it closer to predictive capabilities for field scale

  19. From infinitesimal to full contact between rough surfaces: evolution of the contact area

    CERN Document Server

    Yastrebov, Vladislav A; Molinari, Jean-François

    2014-01-01

    We carry out a statistically meaningful study on self-affine rough surfaces in elastic frictionless non-adhesive contact. We study the evolution of the true contact area under increasing squeezing pressure. Rough surfaces are squeezed from zero up to full contact, which enables us to compare the numerical results both with asperity based models at light pressures and with Persson's contact model for the entire range of pressures. Through the contact perimeter we estimate the error bounds inherent to contact area calculation in discrete problems. A large number of roughness realizations enables us to compute reliably the derivative of the contact area with respect to the pressure. In contrast to Persson's model and in agreement with asperity based models, we demonstrate that at light pressures it is a decreasing convex function. The nonlinearity of the contact area evolution, preserved for the entire range of pressures, is especially strong close to infinitesimal contact. This fact makes difficult an accurate ...

  20. Sediment Surface Areas, Organic Content, and Metal Fractionation of Point Mugu Sediments

    Science.gov (United States)

    Becerra, C. A.; Wong, N.; Khachikian, C. S.

    2002-12-01

    Point Mugu contains one of the largest coastal wetlands ecosystems in California, which includes a Naval Air station, several sewage oxidation ponds and a partly dredged lagoon. Remediation efforts include investigating the feasibility of using the present sewage pond sludge to restore a dredged area in the lagoon. A problem with this approach is the potential release and subsequent environmental impact of the toxic substances from the sludge. Contaminants may become unavailable once sorbed onto particles. In general, this process is a direct function of surface area and organic carbon sorbed onto the sediment. The goal of the current investigation is to provide insight into the biological availability of a suite of metal contaminants in Pt. Mugu marsh sediments by studying changes in the physical and chemical properties of the sediments at horizontal and vertical spatial scales. The surface area and organic carbon for eight cores were measured as well as the first three sequential extraction of a host of metals. We have found that a direct correlation exists between surface area and the organic content of sediments as a function of depth. Surface area and the amount of organic carbon decreases with depth, which could result in higher availability of metals with increasing depth into the sediments.

  1. Evaporation and wetted area of single droplets on waxy and hairy leaf surfaces.

    Science.gov (United States)

    Zhu, H; Yu, Y; Ozkan, H E; Derksen, R C; Krause, C R

    2008-01-01

    Understanding the evaporation of pesticide droplets and wetting of Leaf surfaces can increase foliar application efficiency and reduce pesticide use. Evaporation time and wetted area of single pesticide droplets on hairy and waxy geranium leaf surfaces were measured under the controlled conditions for five droplet sizes and three relative humidities. The sprays used to form droplets included water, a nonionic colloidal polymer drift retardant, an alkyl polyoxyethylene surfactant, and an insecticide. Adding the surfactant into spray mixtures greatly increased droplet wetted area on the surfaces while droplet evaporation time was greatly reduced. Adding the drift retardant into spray mixture slightly increased the droplet evaporation time and the wetted area. Also, droplets had Longer evaporation times on waxy leaves than on hairy leaves for all droplet diameters and all relative humidity conditions. Increasing relative humidity could increase the droplet evaporation time greatly but did not change the the wetted area. The droplet evaporation time and wetted area increased exponentially as the droplet size increased. Therefore, droplet size, surface characteristics of the target, relative humidity, and chemical composition of the spray mixtures (water alone, pesticide, additives) should be included as important factors that affect the efficacy and efficiency of pesticide applications.

  2. Closure Report for Corrective Action Unit 300: Surface Release Areas Nevada Test Site, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Restoration

    2007-07-01

    Corrective Action Unit (CAU) 300 is located in Areas 23, 25, and 26 of the Nevada Test Site, which is located approximately 65 miles northwest of Las Vegas, Nevada. CAU 300 is listed in the Federal Facility Agreement and Consent Order of 1996 as Surface Release Areas and is comprised of the following seven Corrective Action Sites (CASs), which are associated with the identified Building (Bldg): {sm_bullet} CAS 23-21-03, Bldg 750 Surface Discharge {sm_bullet} CAS 23-25-02, Bldg 750 Outfall {sm_bullet} CAS 23-25-03, Bldg 751 Outfall {sm_bullet} CAS 25-60-01, Bldg 3113A Outfall {sm_bullet} CAS 25-60-02, Bldg 3901 Outfall {sm_bullet} CAS 25-62-01, Bldg 3124 Contaminated Soil {sm_bullet} CAS 26-60-01, Bldg 2105 Outfall and Decon Pad The Nevada Division of Environmental Protection (NDEP)-approved corrective action alternative for CASs 23-21-03, 23-25-02, and 23-25-03 is no further action. As a best management practice, approximately 48 feet of metal piping was removed from CAS 23-25-02 and disposed of as sanitary waste. The NDEP-approved corrective action alternative for CASs 25-60-01, 25-60-02, 25-62-01, and 26-60-01, is clean closure. Closure activities for these CASs included removing and disposing of soil impacted with total petroleum hydrocarbons-diesel range organics (TPH-DRO), polychlorinated biphenyls (PCBs), semivolatile organic compounds (SVOCs), and cesium (Cs)-137, concrete impacted with TPH-DRO, and associated piping impacted with TPH-DRO. CAU 300 was closed in accordance with the NDEP-approved CAU 300 Corrective Action Plan (CAP) (U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office [NNSA/NSO], 2006). The closure activities specified in the CAP were based on the recommendations presented in the CAU 300 Corrective Action Decision Document (NNSA/NSO, 2005). This Closure Report documents CAU 300 closure activities. During closure activities, approximately 40 cubic yards (yd3) of low-level waste consisting of TPH-DRO-, PCB

  3. Stealth voluntarism: an expectation of health professional work in underserviced areas?

    Science.gov (United States)

    Hanlon, Neil; Halseth, Greg; Ostry, Alec

    2011-01-01

    Voluntarism can take many forms, and its boundaries are not always straightforward. In this paper, we explore a particular type of voluntary activities carried out as an add-on to formal duties of health care professionals and administrators. We outline some impressions of what we term 'stealth voluntarism', which we situate at the interstices of health care professionalism, place integration, and welfare retrenchment. Our discussion draws on exploratory research looking at health care and social support in smaller urban centres in the interior of British Columbia, Canada. While stealth voluntarism can occur anywhere, we highlight its unique implications for systems of support in rural and small town places. We conclude by considering the wider implications of stealth voluntarism as an expectation of professional work in underserviced areas, particularly in the context of welfare retrenchment and the offloading of care.

  4. Influence of the work of adhesion on the dynamic wetting of chemically heterogeneous surfaces.

    Science.gov (United States)

    Ray, Santanu; Sedev, Rossen; Priest, Craig; Ralston, John

    2008-11-18

    The velocity dependence of the dynamic contact angle for a glycerol-water mixture wetting two different chemically heterogeneous surfaces (mixed thiols on gold and partially methylated titania, 16 samples in all) was studied. The molecular kinetic theory (MKT) of wetting was used to interpret the dynamic contact angle data. The equilibrium displacement frequency ( K 0) was predominantly determined by the viscous contribution from the bulk liquid, with a minor contribution from the surface. The mean distance between surface sites (lambda) decreased with increasing work of adhesion. The contact line friction coefficient zeta 0 was found to vary exponentially with the work of adhesion, enabling the unit flow volume of the liquid to be obtained.

  5. Influence of Conditioned Surface Textures on Plain Journal Bearing Performance Working on HL Conditions

    Directory of Open Access Journals (Sweden)

    Vélez-Restrepo J.M.

    2012-07-01

    Full Text Available As an answer to the need for reducing friction losses on bearings, dynamic seals, piston rings, cutting tools and others, a lot of work has been dedicated to mechanical systems study whose surfaces have been textured in a controlled way. Theoretical models and experimental results have shown improvements on the tribological performance of these systems regarding untextured systems, working under the same conditions. This paper presents a numerical model for getting relationships among the operational conditions (load, speed, and dynamic viscosity, the minimum lubricate film thickness, the friction coefficient and the conditioned micro-topography of a plain sliding bearing working under a hydrodynamic regime. Moreover, regarding other similar works the constructed model allows studying the combined effect of the micro-wedges that work as micro-bearings, and the typical convergent macro-wedge of these study elements.

  6. Opinions of South African optometry students about working in rural areas after graduation

    Science.gov (United States)

    Oduntan, Olalekan A.; Hansraj, Rekha

    2015-01-01

    Background Eye and vision problems have been reported to be more prevalent in rural than urban areas; and a large proportion of South Africans live in the rural areas. Aim To investigate the opinions of South African optometry students about working in rural areas after completion of their training and to identify factors that may influence their decisions. Method This was a cross-sectional quantitative study using a survey instrument containing both closed and open-ended, semi-structured questions. Results Four hundred and thirty-eight students responded to the questionnaire (85.4% response rate). Overall, many of the respondents did not want to open their first (66%) or second practices (64.6%) in the rural areas. However, most respondents from rural backgrounds reported that they would open their first (77.2%) or second (79.4%) practice in the rural areas. The main reasons cited by the respondents for their unwillingness to work in the rural areas were financial concerns (81.2%), personal safety (80.1%) and poor living conditions (75.3%), with a significantly higher number (p influencer leur décision. Méthode C’est une étude quantitative transversale utilisant un instrument de sondage contenant des questions semi-structurées fermée et ouvertes. Résultats Quatre cent trente-huit étudiants ont répondu au questionnaire (un taux de réponse de 85.4%). En général, un grand nombre de répondants ne voulaient pas ouvrir leur premier (66%) ou deuxième cabinet (64.6%) dans les zones rurales. Cependant, la plupart des répondants originaires de la campagne ont répondu qu’ils ouvriraient leur premier cabinet (77.2%) ou leur second (79.4%) dans les zones rurales. Les raisons principales citées par les répondants pour ne pas vouloir travailler dans les zones rurales étaient des préoccupations financières (81.2%), la sécurité personnelle (80.1%) et les mauvaises conditions de vie (75.3%), avec un plus grand nombre (p < 0.05) de la part des r

  7. General models for the spectra of surface area scaling strategies of cells and organisms: fractality, geometric dissimilitude, and internalization.

    Science.gov (United States)

    Okie, Jordan G

    2013-03-01

    Surface areas and volumes of biological systems-from molecules to organelles, cells, and organisms-affect their biological rates and kinetics. Therefore, surface area-to-volume ratios and the scaling of surface area with volume profoundly influence ecology, physiology, and evolution. The zeroth-order geometric expectation is that surface area scales with body mass or volume as a power law with an exponent of two-thirds, with consequences for surface area-to-volume (SA : V) ratios and constraints on size; however, organisms have adaptations for altering the surface area scaling and SA : V ratios of their bodies and structures. The strategies fall into three groups: (1) fractal-like surface convolutions and crinkles; (2) classic geometric dissimilitude through elongating, flattening, fattening, and hollowing; and (3) internalization of surfaces. Here I develop general quantitative theory to model the spectra of effects of these strategies on SA : V ratios and surface area scaling, from exponents of less than two-thirds to superlinear scaling and mixed-power laws. Applying the theory to cells helps quantitatively evaluate the effects of membrane fractality, shape-shifting, vacuoles, vesicles, and mitochondria on surface area scaling, informing understanding of cell allometry, morphology, and evolution. Analysis of compiled data indicates that through hollowness and surface internalization, eukaryotic phytoplankton increase their effective surface area scaling, attaining near-linear scaling in larger cells. This unifying theory highlights the fundamental role of biological surfaces in metabolism and morphological evolution.

  8. Analysis of the Contact Area of Smooth and Rough Surfaces in Contact with Sphere Indenter Using Finite Element Method

    Directory of Open Access Journals (Sweden)

    Kartini

    2016-01-01

    Full Text Available This paper analyzes the contact area of the contact between a deformable rough surface (smooth and rough and a hard smooth sphere indenter using finite element method. A method was introduced to generate a three dimensional rough surfaces using Computer Aided Design (CAD software. The rough surface model was developed based on the surface measurement data, while the smooth surface model was generated from the CAD software. Contact area and contact deformation were analyzed. Results showed that the contact area between rough surface versus sphere and smooth surface versus sphere is different.

  9. An Evolutionary Approach to the Delineation of Functional Areas Based on Travel-to-work Flows

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    This paper presents a new approach to the delineation of local labor markets based on evolutionary computation. The aim of the exercise is the division of a given territory into functional regions based on travel-to-work flows. Such regions are defined so that a high degree of inter-regional separation and of intra-regional integration in both cases in terms of commuting flows is guaranteed.Additional requirements include the absence of overlap between delineated regions and the exhaustive coverage of the whole territory.The procedure is based on the maximization of a fitness function that measures aggregate intra-region interaction under constraints of inter-region separation and minimum size. In the experimentation stage, two variations of the fitness function are used, and the process is also applied as a final stage for the optimization of the results from one of the most successful existing methods, which are used by the British authorities for the delineation of travel-to-work areas (TTWAs). The empirical exercise is conducted using real data for a sufficiently large territory that is considered to be representative given the density and variety of travel-to-work patterns that it embraces. The paper includes the quantitative comparison with alternative traditional methods, the assessment of the performance of the set of operators which has been specifically designed to handle the regionalization problem and the evaluation of the convergence process. The robustness of the solutions, something crucial in a research and policy-making context, is also discussed in the paper.

  10. Large-area homogeneous periodic surface structures generated on the surface of sputtered boron carbide thin films by femtosecond laser processing

    Science.gov (United States)

    Serra, R.; Oliveira, V.; Oliveira, J. C.; Kubart, T.; Vilar, R.; Cavaleiro, A.

    2015-03-01

    Amorphous and crystalline sputtered boron carbide thin films have a very high hardness even surpassing that of bulk crystalline boron carbide (≈41 GPa). However, magnetron sputtered B-C films have high friction coefficients (C.o.F) which limit their industrial application. Nanopatterning of materials surfaces has been proposed as a solution to decrease the C.o.F. The contact area of the nanopatterned surfaces is decreased due to the nanometre size of the asperities which results in a significant reduction of adhesion and friction. In the present work, the surface of amorphous and polycrystalline B-C thin films deposited by magnetron sputtering was nanopatterned using infrared femtosecond laser radiation. Successive parallel laser tracks 10 μm apart were overlapped in order to obtain a processed area of about 3 mm2. Sinusoidal-like undulations with the same spatial period as the laser tracks were formed on the surface of the amorphous boron carbide films after laser processing. The undulations amplitude increases with increasing laser fluence. The formation of undulations with a 10 μm period was also observed on the surface of the crystalline boron carbide film processed with a pulse energy of 72 μJ. The amplitude of the undulations is about 10 times higher than in the amorphous films processed at the same pulse energy due to the higher roughness of the films and consequent increase in laser radiation absorption. LIPSS formation on the surface of the films was achieved for the three B-C films under study. However, LIPSS are formed under different circumstances. Processing of the amorphous films at low fluence (72 μJ) results in LIPSS formation only on localized spots on the film surface. LIPSS formation was also observed on the top of the undulations formed after laser processing with 78 μJ of the amorphous film deposited at 800 °C. Finally, large-area homogeneous LIPSS coverage of the boron carbide crystalline films surface was achieved within a large range

  11. Quality of surface-water supplies in the Triangle area of North Carolina, water year 2008

    Science.gov (United States)

    Giorgino, M.J.; Rasmussen, R.B.; Pfeifle, C.A.

    2012-01-01

    Surface-water supplies are important sources of drinking water for residents in the Triangle area of North Carolina, which is located within the upper Cape Fear and Neuse River Basins. Since 1988, the U.S. Geological Survey and a consortium of governments have tracked water-quality conditions and trends in several of the area's water-supply lakes and streams. This report summarizes data collected through this cooperative effort, known as the Triangle Area Water Supply Monitoring Project, during October 2007 through September 2008. Major findings for this period include:

  12. Changing surface-atmosphere energy exchange and refreezing capacity of the lower accumulation area, West Greenland

    Science.gov (United States)

    Charalampidis, C.; van As, D.; Box, J. E.; van den Broeke, M. R.; Colgan, W. T.; Doyle, S. H.; Hubbard, A. L.; MacFerrin, M.; Machguth, H.; Smeets, C. J. P. P.

    2015-11-01

    We present 5 years (2009-2013) of automatic weather station measurements from the lower accumulation area (1840 m a.s.l. - above sea level) of the Greenland ice sheet in the Kangerlussuaq region. Here, the summers of 2010 and 2012 were both exceptionally warm, but only 2012 resulted in a strongly negative surface mass budget (SMB) and surface meltwater run-off. The observed run-off was due to a large ice fraction in the upper 10 m of firn that prevented meltwater from percolating to available pore volume below. Analysis reveals an anomalously low 2012 summer-averaged albedo of 0.71 (typically ~ 0.78), as meltwater was present at the ice sheet surface. Consequently, during the 2012 melt season, the ice sheet surface absorbed 28 % (213 MJ m-2) more solar radiation than the average of all other years. A surface energy balance model is used to evaluate the seasonal and interannual variability of all surface energy fluxes. The model reproduces the observed melt rates as well as the SMB for each season. A sensitivity analysis reveals that 71 % of the additional solar radiation in 2012 was used for melt, corresponding to 36 % (0.64 m) of the 2012 surface lowering. The remaining 64 % (1.14 m) of surface lowering resulted from high atmospheric temperatures, up to a +2.6 °C daily average, indicating that 2012 would have been a negative SMB year at this site even without the melt-albedo feedback. Longer time series of SMB, regional temperature, and remotely sensed albedo (MODIS) show that 2012 was the first strongly negative SMB year, with the lowest albedo, at this elevation on record. The warm conditions of recent years have resulted in enhanced melt and reduction of the refreezing capacity in the lower accumulation area. If high temperatures continue, the current lower accumulation area will turn into a region with superimposed ice in coming years.

  13. Groundwater interaction with surface drains in the Ord River Irrigation Area, northern Australia: investigation by multiple methods

    Science.gov (United States)

    Smith, Anthony J.; Pollock, Daniel W.; Palmer, Duncan

    2010-08-01

    Following 35 years of persistent groundwater rise beneath northern Ivanhoe Plain in the Ord River Irrigation Area, northern Australia, the water table appears to have stabilized near the base of the irrigation surface-drain network. Hydrometric evidence indicates that intersection of the deepest surface drains by the rising water table simultaneously reduced aquifer recharge from surface-water infiltration and increased aquifer discharge by groundwater exfiltration. Water-table analysis supports the working hypothesis that the largest irrigation drain D4 on north Ivanhoe Plain has been receiving a significant amount of groundwater discharge since the mid-1990s. The rate of groundwater discharge to surface drains on north Ivanhoe Plain was estimated to be around 15-20 million (M)L/day based on groundwater-flow modelling. Groundwater tracing using radon and electrical conductivity indicated that groundwater discharge to drain D4 was ˜6-12 ML/day in August 2007. The rate of groundwater discharge was significantly larger where the drain traverses a very-permeable sand and gravel palaeochannel. Relatively modest exfiltration rates of order of magnitude tens to hundreds of mm/day into the drain were estimated to mitigate 0.5 m/year groundwater accretion for a land area of order of magnitude hundreds to thousands of ha.

  14. Effects of surface oxygen on charge storage in high surface area early transition-metal carbides and nitrides

    Science.gov (United States)

    Djire, Abdoulaye; Ajenifujah, Olabode T.; Sleightholme, Alice E. S.; Rasmussen, Paul; Thompson, Levi T.

    2015-02-01

    The effect of surface oxygen on the physical and electrochemical properties of high surface area Mo, V and W carbides and nitrides has been investigated. These materials hold promise for use in supercapacitors and other electrochemical conversion devices. The carbides and nitrides were synthesized using a temperature programmed reaction method and passivated to avoid bulk oxidation on exposure to air. The passivated materials were activated in 0.3 mol dm-3 NaOH solution to remove the oxygen-rich passivation layer. This activation resulted in significant changes in the electrochemical stabilities and capacitances. The surface areas for the Mo and W-based materials were higher after activation, with the effect ranging from an 11% increase for Mo2N to a 208% increase for W2C. An increase in pore volume and mesopore density was also observed for most of the materials. Interestingly, the VC and W2C, which were electrochemically unstable in acidic electrolyte in their passivated form, were stable after activation. The capacitances of all of the materials were increased after activation with the effect ranging from 48% for Mo2N to a 79% increase for (α + β)-Mo2C. This activation process could be used to improve the performance of carbide and nitride-based supercapacitor electrode materials.

  15. Dialyzer membranes: effect of surface area and chemical modification of cellulose on complement and platelet activation.

    Science.gov (United States)

    Mahiout, A; Meinhold, H; Kessel, M; Schulze, H; Baurmeister, U

    1987-04-01

    Using an ex vivo model, the effects of membrane composition and surface area on both the complement system (as reflected by plasma C3a levels) and platelets [as indicated by plasma concentrations of thromboxane B2 (TXB2) and platelet factor 4 (PF4)] were studied. In this model, polyacrylonitrile (PAN) was associated with less complement activation than cuprammonium cellulose (CC). A new "modified cellulose" (MC) membrane, in which a small number of the free hydroxyl groups on cellulose are substituted with a tertiary amino compound, was also associated with a low degree of complement activation, similar to that with PAN. However, the extent of hydroxyl group substitution in four MC membrane subtypes did not correlate with the reduction in complement activation. In studies using CC, the amount of generated C3a correlated with the membrane surface area, although the relationship was curvilinear. Plasma concentrations at the "dialyzer" outlet of TXB2 and PF4 were similar with CC, PAN, and MC. In studies with the MC subtypes, increasing the extent of hydroxyl group substitution paradoxically increased, albeit slightly, the amount of TXB2 generation. In studies with CC, a linear relationship between membrane surface area and TXB2 generation was found. The results suggest a dissociation between platelet and complement effects among different dialyzer membranes, and underline the importance of membrane surface area.

  16. Condensation-Enhanced Self-Assembly as a Route to High Surface Area alpha-Aluminas

    NARCIS (Netherlands)

    Perez, Lidia Lopez; Zarubina, Valeriya; Heeres, Hero Jan; Melian-Cabrera, Ignacio

    2013-01-01

    High surface area nanosized alpha-alumina has been obtained by thermally treating a sol-gel-derived mesophase at 1200 degrees C; the mesophase was synthesized by a sol-gel route involving evaporation induced self-assembly (EISA) of a hydrolyzed gel from Al-tri-sec-butoxide in s-BuOH in the presence

  17. Surface area of lactose and lactose granulates on consolidation and compaction

    NARCIS (Netherlands)

    Riepma, Klaas Alouis

    1993-01-01

    This dissertation discusses the effect of short time storage at different conditions on the strength and the specific BET surface area of lactose tablets. In addition, some aspects are studied of the consolidation and compaction properties of crystalline lactose fractions in heterogeneous systems. T

  18. Dose banding as an alternative to body surface area-based dosing of chemotherapeutic agents

    NARCIS (Netherlands)

    E. Chatelut (Etienne); M.L. White-Koning (M.); A.H.J. Mathijssen (Ron); F. Puisset (F.); S.D. Baker (Sharyn); A. Sparreboom (Alex)

    2012-01-01

    textabstractBackground: Dose banding is a recently suggested dosing method that uses predefined ranges (bands) of body surface area (BSA) to calculate each patients dose by using a single BSA-value per band. Thus, drugs with sufficient long-term stability can be prepared in advance. The main advanta

  19. Should blood flow during cardiopulmonary bypass be individualized more than to body surface area?

    DEFF Research Database (Denmark)

    Thomassen, Sisse Anette; Larsson, A; Andreasen, Jan Jesper;

    Blood flow during cardiopulmonary bypass (CPB) is calculated on body surface area (BSA). Increasing comorbidity, age and weight of today's cardiac patients question this calculation as it may not reflect individual metabolic requirement. The hypothesis was that a measured cardiac index (CI) prior...... not improve cerebral and systemic oxygenation compared to a blood flow based on BSA....

  20. Escaping the correction for body surface area when calculating glomerular filtration rate in children

    Energy Technology Data Exchange (ETDEWEB)

    Piepsz, Amy; Tondeur, Marianne [CHU St. Pierre, Department of Radioisotopes, Brussels (Belgium); Ham, Hamphrey [University Hospital Ghent, Department of Nuclear Medicine, Ghent (Belgium)

    2008-09-15

    {sup 51}Cr ethylene diamine tetraacetic acid ({sup 51}Cr EDTA) clearance is nowadays considered as an accurate and reproducible method for measuring glomerular filtration rate (GFR) in children. Normal values in function of age, corrected for body surface area, have been recently updated. However, much criticism has been expressed about the validity of body surface area correction. The aim of the present paper was to present the normal GFR values, not corrected for body surface area, with the associated percentile curves. For that purpose, the same patients as in the previous paper were selected, namely those with no recent urinary tract infection, having a normal left to right {sup 99m}Tc MAG3 uptake ratio and a normal kidney morphology on the early parenchymal images. A single blood sample method was used for {sup 51}Cr EDTA clearance measurement. Clearance values, not corrected for body surface area, increased progressively up to the adolescence. The percentile curves were determined and allow, for a single patient, to estimate accurately the level of non-corrected clearance and the evolution with time, whatever the age. (orig.)

  1. Fabrication of nanoelectromechanical systems via the integration of high surface area glancing angle deposition thin films

    Science.gov (United States)

    Westwood, J. N.; Sauer, V. T. K.; Kwan, J. K.; Hiebert, W. K.; Sit, J. C.

    2014-06-01

    Nanoelectromechanical systems (NEMS) coated with a high surface area thin film are fabricated. Glancing angle deposition (GLAD) is used to uniformly deposit high surface area, nanostructured SiO2 films on top of released NEMS. The resonance frequencies and quality factors are measured to assess the potential of the high surface area NEMS for sensing experiments. Resonance frequencies of coated cantilevers, although reduced by mass loading, can be predicted accurately using our derived model. Compressive stress makes the resonance frequencies of coated doubly-clamped beams difficult to predict. The quality factors of the coated NEMS are reduced by one order of magnitude by a quasi-continuous layer at the base of the GLAD film, which also introduces an estimated compressive stress of 5.3-9.3 MPa. The limit of detection is demonstrated to be ˜2 pg cm-2. With this successful proof-of-concept demonstration, we anticipate the future use of these devices as high surface area gravimetric mass sensors for applications such as gas chromatography.

  2. High surface area carbon for bifunctional air electrodes applied in zinc-air batteries

    Energy Technology Data Exchange (ETDEWEB)

    Arai, H. [on leave from NTT Laboratories (Japan); Mueller, S.; Haas, O. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1999-08-01

    Bifunctional air electrodes with high surface area carbon substrates showed low reduction overpotential, thus are promising for enhancing the energy efficiency and power capability of zinc-air batteries. The improved performance is attributed to lower overpotential due to diffusion of the reaction intermediate, namely the peroxide ion. (author) 1 fig., 2 refs.

  3. Turbostratic boron nitride coated on high-surface area metal oxide templates

    DEFF Research Database (Denmark)

    Klitgaard, Søren Kegnæs; Egeblad, Kresten; Brorson, M.

    2007-01-01

    Boron nitride coatings on high-surface area MgAl2O4 and Al2O3 have been synthesized and characterized by transmission electron microscopy and by X-ray powder diffraction. The metal oxide templates were coated with boron nitride using a simple nitridation in a flow of ammonia starting from ammonium...

  4. An empirical method for estimating surface area of aggregates in hot mix asphalt

    Directory of Open Access Journals (Sweden)

    R.P. Panda

    2016-04-01

    Full Text Available Bitumen requirement in hot mix asphalt (HMA is directly dependent on the surface area of the aggregates in the mix, which in turn has effect on the asphalt film thickness and the flow characteristics. The surface area of aggregate blend in HMA is calculated using the specific surface area factors assigned to percentage passing through some specific standard sieve sizes and the imaging techniques. The first process is less capital intensive, but purely manual and labour intensive and prone to human errors. Imaging techniques though eliminating the human errors, still have limited use due to capital intensiveness and requirement of well-established laboratories with qualified technicians. Most of the developing countries like India are shortage of well-equipped laboratories and qualified technicians. To overcome these difficulties, the present mathematical model has been developed to estimate the surface area of aggregate blend of HMA from physical properties of aggregates evaluated using simple laboratory equipment. This model has been validated compared with the existing established methods of calculations and can be used as one of the tools in different developing and under developed countries for proper design of HMA.

  5. Specific surface area effect on adsorption of chlorpyrifos and TCP by soils and modeling

    Science.gov (United States)

    The adsorption of chlorpyrifos and TCP (3,5,6, trichloro-2-pyridinol) was determined in four soils (Mollisol, Inceptisol, Entisol, Alfisol) having different specific surface areas (19–84 m2/g) but rather similar organic matter content (2.4–3.5%). Adsorption isotherms were derived from batch equilibr...

  6. Uniform, large surface-area polarization by modifying corona-electrodes geometry.

    Science.gov (United States)

    Tansel, T; Ener Rusen, S; Rusen, A

    2013-01-01

    We report on the uniform, large scale polarization of ferroelectric materials by a newly designed corona charging technique developing nonconventional electrodes geometry. The results of pyroelectric measurements represented the spatial homogeneity of the polarization attained through a surface area of ~25 cm(2).

  7. Flexible shrink-induced high surface area electrodes for electrochemiluminescent sensing.

    Science.gov (United States)

    Pegan, Jonathan D; Ho, Adrienne Y; Bachman, Mark; Khine, Michelle

    2013-11-07

    Photolithographically defined metallic thin film on commodity shrink-wrap is leveraged to create robust electrodes. By thermally shrinking the film, electrodes are reduced by 20× in footprint for improved resolution and conductivity with >600% enhancements in electrochemically active surface area; as electrochemiluminescent sensors, they demonstrate improved limits of detection.

  8. Aggregate surface areas quantified through laser measurements for South African asphalt mixtures

    CSIR Research Space (South Africa)

    Anochie-Boateng, Joseph

    2012-02-01

    Full Text Available thicknesses of five typical South African mixtures were calculated and compared with the film thicknesses calculated from the traditional Hveem method. Based on the laser scanning method, a new surface area factors were developed for coarse aggregates used...

  9. Condensation-Enhanced Self-Assembly as a Route to High Surface Area alpha-Aluminas

    NARCIS (Netherlands)

    Perez, Lidia Lopez; Zarubina, Valeriya; Heeres, Hero Jan; Melian-Cabrera, Ignacio

    2013-01-01

    High surface area nanosized alpha-alumina has been obtained by thermally treating a sol-gel-derived mesophase at 1200 degrees C; the mesophase was synthesized by a sol-gel route involving evaporation induced self-assembly (EISA) of a hydrolyzed gel from Al-tri-sec-butoxide in s-BuOH in the presence

  10. Minimal area surfaces dual to Wilson loops and the Mathieu equation

    CERN Document Server

    Huang, Changyu; Kruczenski, Martin

    2016-01-01

    The AdS/CFT correspondence relates Wilson loops in N=4 SYM to minimal area surfaces in $AdS_5\\times S^5$ space. Recently, a new approach to study minimal area surfaces in $AdS_3 \\subset AdS_5$ was discussed based on a Schroedinger equation with a periodic potential determined by the Schwarzian derivative of the shape of the Wilson loop. Here we use the Mathieu equation, a standard example of a periodic potential, to obtain a class of Wilson loops such that the area of the dual minimal area surface can be computed analytically in terms of eigenvalues of such equation. As opposed to previous examples, these minimal surfaces have an umbilical point (where the principal curvatures are equal) and are invariant under $\\lambda$-deformations. In various limits they reduce to the single and multiple wound circular Wilson loop and to the regular light-like polygons studied by Alday and Maldacena. In this last limit, the periodic potential becomes a series of deep wells each related to a light-like segment. Small correc...

  11. Determination of colloidal gold nanoparticle surface areas, concentrations, and sizes through quantitative ligand adsorption.

    Science.gov (United States)

    Gadogbe, Manuel; Ansar, Siyam M; He, Guoliang; Collier, Willard E; Rodriguez, Jose; Liu, Dong; Chu, I-Wei; Zhang, Dongmao

    2013-01-01

    Determination of the true surface areas, concentrations, and particle sizes of gold nanoparticles (AuNPs) is a challenging issue due to the nanoparticle morphological irregularity, surface roughness, and size distributions. A ligand adsorption-based technique for determining AuNP surface areas in solution is reported. Using a water-soluble, stable, and highly UV-vis active organothiol, 2-mercaptobenzimidazole (MBI), as the probe ligand, we demonstrated that the amount of ligand adsorbed is proportional to the AuNP surface area. The equivalent spherical AuNP sizes and concentrations were determined by combining the MBI adsorption measurement with Au(3+) quantification of aqua regia-digested AuNPs. The experimental results from the MBI adsorption method for a series of commercial colloidal AuNPs with nominal diameters of 10, 30, 50, and 90 nm were compared with those determined using dynamic light scattering, transmission electron microscopy, and localized surface plasmonic resonance methods. The ligand adsorption-based technique is highly reproducible and simple to implement. It only requires a UV-vis spectrophotometer for characterization of in-house-prepared AuNPs.

  12. Error estimates for density-functional theory predictions of surface energy and work function

    Science.gov (United States)

    De Waele, Sam; Lejaeghere, Kurt; Sluydts, Michael; Cottenier, Stefaan

    2016-12-01

    Density-functional theory (DFT) predictions of materials properties are becoming ever more widespread. With increased use comes the demand for estimates of the accuracy of DFT results. In view of the importance of reliable surface properties, this work calculates surface energies and work functions for a large and diverse test set of crystalline solids. They are compared to experimental values by performing a linear regression, which results in a measure of the predictable and material-specific error of the theoretical result. Two of the most prevalent functionals, the local density approximation (LDA) and the Perdew-Burke-Ernzerhof parametrization of the generalized gradient approximation (PBE-GGA), are evaluated and compared. Both LDA and GGA-PBE are found to yield accurate work functions with error bars below 0.3 eV, rivaling the experimental precision. LDA also provides satisfactory estimates for the surface energy with error bars smaller than 10%, but GGA-PBE significantly underestimates the surface energy for materials with a large correlation energy.

  13. A Three-Dimensional Enormous Surface Area Aluminum Microneedle Array with Nanoporous Structure

    Directory of Open Access Journals (Sweden)

    Po Chun Chen

    2013-01-01

    Full Text Available We proposed fabricating an aluminum microneedle array with a nanochannel structure on the surface by combining micromachining, electrolyte polishing, and anodization methods. The microneedle array provides a three-dimensional (3D structure that possesses several hundred times more surface area than a traditional nanochannel template. Therefore, the microneedle array can potentially be used in many technology applications. This 3D microneedle array device can not only be used for painless injection or extraction, but also for storage, highly sensitive detection, drug delivery, and microelectrodes. From the calculation we made, the microneedle array not only increases surface area, but also enlarges the capacity of the device. Therefore, the microneedle array can further be used on many detecting, storing, or drug delivering applications.

  14. Hydrochemistry of surface water and groundwater from a fractured carbonate aquifer in the Helwan area, Egypt

    Indian Academy of Sciences (India)

    Fathy A Abdalla; Traugott Scheytt

    2012-02-01

    Groundwater is an important water resource in the Helwan area, not only for drinking and agricultural purposes, but also because several famous mineral springs have their origin in the fractured carbonate aquifer of the region. The area is heavily populated with a high density of industrial activities which may pose a risk for groundwater and surface water resources. The groundwater and surface water quality was investigated as a basis for more future investigations. The results revealed highly variable water hydrochemistry. High values of chloride, sulphate, hardness and significant mineralization were detected under the industrial and high-density urban areas. High nitrate contents in the groundwater recorded in the southern part of the study area are probably due to irrigation and sewage infiltrations from the sewage treatment station. The presence of shale and marl intercalation within the fissured and cavernous limestone aquifer promotes the exchange reactions and dissolution processes. The groundwater type is sodium, sulphate, chloride reflecting more mineralized than surface water. The results also showed that water in the study area (except the Nile water) is unsuitable for drinking purposes, but it can be used for irrigation and industrial purposes with some restrictions.

  15. Contrasting characteristics of the surface energy balance between the urban and rural areas of Beijing

    Science.gov (United States)

    Wang, Linlin; Gao, Zhiqiu; Miao, Shiguang; Guo, Xiaofeng; Sun, Ting; Liu, Maofeng; Li, Dan

    2015-04-01

    A direct comparison of urban and rural surface energy balances, as well as a variety of other variables including incoming shortwave/longwave radiation and aerosol optical depth, is conducted for the Beijing metropolitan area. The results indicate that, overall, the urban area receives a smaller amount of incoming shortwave radiation but a larger amount of incoming longwave radiation. However, comparisons in the aerosol optical depth and cloud fraction at the two locations suggest that neither aerosol optical depth nor cloud fraction alone can explain the difference in the incoming shortwave radiation. The urban-rural differences in the incoming longwave radiation are unlikely to be caused by the presence of more abundant greenhouse gases over the urban area, as suggested by some previous studies, given that water vapor is the most dominant greenhouse gas and precipitable water is found to be less in urban areas. The higher incoming longwave radiation observed over the urban area is mostly likely due to the higher temperatures of the ambient air. The urban area is also found to always produce higher sensible heat fluxes and lower latent heat fluxes in the growing season. Furthermore, the urban area is associated with a larger amount of available energy (the sum of sensible and latent heat fluxes) than the rural area, except in May and October when evapotranspiration in the rural area significantly exceeds that in the urban area. This study provides observational evidence of urban-rural contrasts in relevant energy-balance components that plausibly arise from urban-rural differences in atmospheric and land-surface conditions.

  16. Evaluation of working practices and surface contamination with antineoplastic drugs in outpatient oncology health care settings.

    Science.gov (United States)

    Kopp, Bettina; Schierl, Rudolf; Nowak, Dennis

    2013-01-01

    Many antineoplastic drugs are classified as carcinogenic, mutagenic and teratogenic for humans. Therefore, minimization of exposure is required to reduce health risks to employees. The aim of this study was to evaluate working practices and safety measures during drug administration and to assess workplace contamination in outpatient oncology health care settings. Questionnaires about working procedures were sent to 137 day hospitals and private practices. Workplace contamination with 5-fluorouracil, platinum, gemcitabine, cyclophosphamide, ifosfamide, methotrexate, docetaxel and paclitaxel was assessed using wipe samples. Forty institutions participated in the study, and in 28 departments, wipe samples were taken. Depending on the kind of activity, working procedures often (5-80%) were not confirmed with recommendations for safe handling of antineoplastic drugs. Altogether, 60.9% of the sampling results were above the limit of detection (LOD). Most frequent loads were detected with 5-FU (93.5%) and platinum (88.4%). Contamination was detected on all surfaces and the results ranged between drugs handled and the extent of surface contamination. However, specific working practices resulting in a lower number of positive wipe samples could be identified (e.g., use of closed infusion systems). Workplace contamination with antineoplastic drugs is still present. As patients have to be considered as a potential source of contamination, surface contamination is difficult to avoid. However, our study revealed that it is possible to administer a large number of preparations without causing high workplace contamination.

  17. Work of Adhesion of a Sessile Drop to a Clean Surface.

    Science.gov (United States)

    Schroder

    1999-05-15

    According to the Young-Dupré equation, as interpreted by Bangham and Razouk, the work of adhesion of a sessile drop to a smooth solid surface is given by WS(V)L = gammaL (1 + cos θ), where θ is the equilibrium contact angle measured at equilibrium of the system with the saturated vapor of the liquid, and WS(V)L is the work of adhesion of that drop to the solid surface which is in equilibrium with that vapor and may contain an adlayer of the vapor. For calculation of WSL, the work of adhesion of a sessile drop to a clean solid surface, the equation WSL = gammaL (1 + cos θ) + Pie is generally used (although Bangham and Razouk never proposed it). Pie is the negative of the free energy of formation of the adlayer, sometimes called the spreading pressure. In the present work it is shown that the latter equation cannot be accurate. Copyright 1999 Academic Press.

  18. Potential areas for the near surface disposal of radioactive waste in Pahang

    Science.gov (United States)

    Harun, Nazran; Yaacob, Wan Zuhairi Wan; Simon, Norbert

    2016-11-01

    Radioactive material has been used in Malaysia since the 1960's. The low level radioactive wastes are generated every year and stored in Nuclear Malaysia. The storage capacities are expected to reach its maximum capacity by the year 2025. Disposal of the radioactive waste is considered as one of the best options for future radioactive and nuclear material generated in Malaysia, hence the necessary site selection. The selection process used the IAEA document as the main reference, supported by site selection procedure applied by various countries. ArcGIS software was used to simulate the selection of the near surface radioactive waste disposal. This paper suggested the best four potential areas for the near surface radioactive waste disposal in Pahang state, Malaysia, the Sg. Lembing, Gambang, Felda Lepar Utara and Cheneh areas. These areas are located within 100 km from the potential radioactive waste producer (Lynas).

  19. Regional brain differences in cortical thickness, surface area and subcortical volume in individuals with Williams syndrome.

    Science.gov (United States)

    Meda, Shashwath A; Pryweller, Jennifer R; Thornton-Wells, Tricia A

    2012-01-01

    Williams syndrome (WS) is a rare genetic neurodevelopmental disorder characterized by increased non-social anxiety, sensitivity to sounds and hypersociability. Previous studies have reported contradictory findings with regard to regional brain variation in WS, relying on only one type of morphological measure (usually volume) in each study. The present study aims to contribute to this body of literature and perhaps elucidate some of these discrepancies by examining concurrent measures of cortical thickness, surface area and subcortical volume between WS subjects and typically-developing (TD) controls. High resolution MRI scans were obtained on 31 WS subjects and 50 typically developing control subjects. We derived quantitative regional estimates of cortical thickness, cortical surface area, and subcortical volume using FreeSurfer software. We evaluated between-group ROI differences while controlling for total intracranial volume. In post-hoc exploratory analyses within the WS group, we tested for correlations between regional brain variation and Beck Anxiety Inventory scores. Consistent with our hypothesis, we detected complex patterns of between-group cortical variation, which included lower surface area in combination with greater thickness in the following cortical regions: post central gyrus, cuneus, lateral orbitofrontal cortex and lingual gyrus. Additional cortical regions showed between-group differences in one (but not both) morphological measures. Subcortical volume was lower in the basal ganglia and the hippocampus in WS versus TD controls. Exploratory correlations revealed that anxiety scores were negatively correlated with gray matter surface area in insula, OFC, rostral middle frontal, superior temporal and lingual gyrus. Our results were consistent with previous reports showing structural alterations in regions supporting the socio-affective and visuospatial impairments in WS. However, we also were able to effectively capture novel and complex

  20. Regional brain differences in cortical thickness, surface area and subcortical volume in individuals with Williams syndrome.

    Directory of Open Access Journals (Sweden)

    Shashwath A Meda

    Full Text Available Williams syndrome (WS is a rare genetic neurodevelopmental disorder characterized by increased non-social anxiety, sensitivity to sounds and hypersociability. Previous studies have reported contradictory findings with regard to regional brain variation in WS, relying on only one type of morphological measure (usually volume in each study. The present study aims to contribute to this body of literature and perhaps elucidate some of these discrepancies by examining concurrent measures of cortical thickness, surface area and subcortical volume between WS subjects and typically-developing (TD controls. High resolution MRI scans were obtained on 31 WS subjects and 50 typically developing control subjects. We derived quantitative regional estimates of cortical thickness, cortical surface area, and subcortical volume using FreeSurfer software. We evaluated between-group ROI differences while controlling for total intracranial volume. In post-hoc exploratory analyses within the WS group, we tested for correlations between regional brain variation and Beck Anxiety Inventory scores. Consistent with our hypothesis, we detected complex patterns of between-group cortical variation, which included lower surface area in combination with greater thickness in the following cortical regions: post central gyrus, cuneus, lateral orbitofrontal cortex and lingual gyrus. Additional cortical regions showed between-group differences in one (but not both morphological measures. Subcortical volume was lower in the basal ganglia and the hippocampus in WS versus TD controls. Exploratory correlations revealed that anxiety scores were negatively correlated with gray matter surface area in insula, OFC, rostral middle frontal, superior temporal and lingual gyrus. Our results were consistent with previous reports showing structural alterations in regions supporting the socio-affective and visuospatial impairments in WS. However, we also were able to effectively capture novel and

  1. High surface area stainless steel brushes as cathodes in microbial electrolysis cells.

    Science.gov (United States)

    Call, Douglas F; Merrill, Matthew D; Logan, Bruce E

    2009-03-15

    Microbial electrolysis cells (MECs) are an efficient technology for generating hydrogen gas from organic matter, but alternatives to precious metals are needed for cathode catalysts. We show here that high surface area stainless steel brush cathodes produce hydrogen at rates and efficiencies similar to those achieved with platinum-catalyzed carbon cloth cathodes in single-chamber MECs. Using a stainless steel brush cathode with a specific surface area of 810 m2/m3, hydrogen was produced at a rate of 1.7 +/- 0.1 m3-H2/m3-d (current density of 188 +/- 10 A/m3) at an applied voltage of 0.6 V. The energy efficiency relative to the electrical energy input was 221 +/- 8%, and the overall energy efficiency was 78 +/- 5% based on both electrical energy and substrate utilization. These values compare well to previous results obtained using platinum on flat carbon cathodes in a similar system. Reducing the cathode surface area by 75% decreased performance from 91 +/- 3 A/m3 to 78 +/- 4 A/m3. A brush cathode with graphite instead of stainless steel and a specific surface area of 4600 m2/m3 generated substantially less current (1.7 +/- 0.0 A/m3), and a flat stainless steel cathode (25 m2/m3) produced 64 +/- 1 A/m3, demonstrating that both the stainless steel and the large surface area contributed to high current densities. Linear sweep voltammetry showed that the stainless steel brush cathodes both reduced the overpotential needed for hydrogen evolution and exhibited a decrease in overpotential over time as a result of activation. These results demonstrate for the first time that hydrogen production can be achieved at rates comparable to those with precious metal catalysts in MECs without the need for expensive cathodes.

  2. Investigation on large-area fabrication of vivid shark skin with superior surface functions

    Science.gov (United States)

    Chen, Huawei; Zhang, Xin; Ma, Lingxi; Che, Da; Zhang, Deyuan; Sudarshan, T. S.

    2014-10-01

    Shark skin has attracted worldwide attention because of its superior drag reduction, antifouling performance induced from its unique surface morphology. Although the vivid shark skin has been fabricated by a bio-replicated micro-imprinting approach in previous studies and superior drag reduction effect has been validated in water tunnel, continuous large-area fabrication is still an obstacle to wide apply. In this paper, one novel bio-replication coating technology is proposed for large-area transfer of shark skin based on rapid UV curable paint. Apart from design of coating system, bio-replication accuracy of surface morphology was validated about 97% by comparison between shark skin template and coating surface morphology. Finally, the drag reduction and anti-fouling function of coating surface were tested in water tunnel and open algae pond respectively. Drag reduction rate of coating surface was validated about 12% higher and anti-fouling was proved to about hundred times ameliorate, all of which are more excellent than simple 2D riblet surface.

  3. Angiosperms evolved a higher mesophyll surface area per volume to maximize exchange surface under a low CO2 world

    Science.gov (United States)

    Théroux-Rancourt, Guillaume; Mason Earles, J.; Gilbert, Matthew E.; Zwieniecki, Maciej A.; Boyce, C. Kevin; McElrone, Andrew; Brodersen, Craig

    2017-04-01

    Variation in leaf mesophyll structure strongly affects CO2 diffusion and photosynthetic rates. One key trait is the surface of mesophyll cells exposed to intercellular airspace (Sm) which increases mesophyll conductance. Consequently, Sm is a key control of CO2 diffusion among species and genotypes. Using Sm values from the literature (> 200 species with 500 data points) and from our high-resolution X-ray computed tomography (μCT) dataset (currently 117 species), Sm shows little variation from pteridophytes to early angiosperms, while eudicots show the greatest structural diversity. However, Sm increases with total thickness of the mesophyll. By considering the exposed surface of the mesophyll to the intercellular air space (IAS) on a leaf or mesophyll volume (Ames/V mes) rather than leaf area basis (Sm), we demonstrate that angiosperms, and most specifically commelinids and non-basal eudicots, have constructed leaves with more surface per volume, while gymnosperms keep a constant Ames/V mes ratio. Thus, this strong phylogenetic signal suggests that angiosperms have developed IAS properties favoring leaves with higher surface to volume ratio, trait that allowed for the potential of high productivity even as atmospheric CO2 declined over the Cenozoic.

  4. Studying surface movements in working bed Sloistiy-II at the Anadyrskaya mine

    Energy Technology Data Exchange (ETDEWEB)

    Rozenbaum, M.A.; Gromov, Yu.V.; Shatrov, V.F.

    1983-01-01

    Results are presented of observations of surface movement during working of the bed SloistiyII in the field of the Anadyrskaya mine by mechanized complex KM-81 E. It is shown that simultaneously with collapse of the main roofing, the entire rock mass subsides to the earth's surface with the formation on it of cave-ins and rupture fractures. For the first time for conditions of permafrost, values are defined for the initial parameters and angles of advance which should be used in solving different types of geochemical problems.

  5. Impact of industrial wastewater disposal on surface water bodies in Mostord area north Greater Cairo

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The studied area (Shoubra El-Khima, Bahteem and Mostorod) lies in the industrial area north of Greater Cairo. The area suffers from several environmental problems such as sewage and disposal of pollutants from the surrounding factories into the surface water pathways in the area. Water samples were collected seasonally from different waterways found in the area, domestic and or industrial liquid wastes from 12 discharge tubes of different factories (as a point source of pollution). Chemical characteristics of different water samples and its heavy metals content were determined using ion coupled plasma technique (ICP). Results indicate that industrial and domestic wastewater samples contain several toxic levels of tested heavy metals (Cd, Co, Pb and Ni) which have a serious impact on surface waterways in the area.Shebin El-Qanater collector drain samples exhibited the highest levels of Cd, Co, Pb and Ni compared to other tested water bodies Mostorod collector drain samples showed the highest levels of Zn and Cu. Industrial effluent samples collected from Cairo Company for Fabric industry had the highest amounts of total Zn Cu, Cd, Co and Pb, while Delta steel company discharges the highest amounts of total Fe and Mn. Al-Ahleya Plastic Company discharges the highest amounts of total-Ni. Generally, it is necessary to impose the environmental laws and its regulation regarding the industrial wastewater treatments and disposals to minimize the risk of the adverse effects of these pollutants.

  6. Ecology of ontogenetic body-mass scaling of gill surface area in a freshwater crustacean.

    Science.gov (United States)

    Glazier, Douglas S; Paul, David A

    2017-06-01

    Several studies have documented ecological effects on intraspecific and interspecific body-size scaling of metabolic rate. However, little is known about how various ecological factors may affect the scaling of respiratory structures supporting oxygen uptake for metabolism. To our knowledge, our study is the first to provide evidence for ecological effects on the scaling of a respiratory structure among conspecific populations of any animal. We compared the body-mass scaling of gill surface area (SA) among eight spring-dwelling populations of the amphipod crustacean Gammarus minus Although gill SA scaling was not related to water temperature, conductivity or G. minus population density, it was significantly related to predation regime (and secondarily to pH). Body-mass scaling slopes for gill SA were significantly lower in four populations inhabiting springs with fish predators than for four populations in springs without fish (based on comparing means of the population slopes, or slopes calculated from pooled raw data for each comparison group). As a result, gill SA was proportionately smaller in adult amphipods from springs with versus without fish. This scaling difference paralleled similar differences in the scaling exponents for the rates of growth and resting metabolic rate. We hypothesized that gill SA scaling is shallower in fish-containing versus fishless spring populations of G. minus because of effects of size-selective predation on size-specific growth and activity that in turn affect the scaling of oxygen demand and concomitantly the gill capacity (SA) for oxygen uptake. Although influential theory claims that metabolic scaling is constrained by internal body design, our study builds on previous work to show that the scaling of both metabolism and the respiratory structures supporting it may be ecologically sensitive and evolutionarily malleable. © 2017. Published by The Company of Biologists Ltd.

  7. 77 FR 38731 - Defense Federal Acquisition Regulation Supplement: Updates to Wide Area WorkFlow (DFARS Case 2011...

    Science.gov (United States)

    2012-06-29

    ..., distributive impacts, and equity). E.O. 13563 emphasizes the importance of quantifying both costs and benefits.... Exceptions to the use of Wide Area WorkFlow are at 232.7002(a). * * * * * PART 232--CONTRACT FINANCING 0 3...

  8. Surface area and volume determination of subgingival calculus using laser fluorescence.

    Science.gov (United States)

    Shakibaie, Fardad; Walsh, Laurence J

    2014-03-01

    Visible red (655 nm) laser fluorescence (LF) devices are currently used for identifying deposits of subgingival calculus on the root surfaces of teeth during dental examination and treatment; however, it is not known how the fluorescence readings produced by commercially available LF systems correlate to the nature of the deposits. This laboratory study explored the correlation between LF digital readings and the surface area and volume of subgingival calculus deposits on teeth. A collection of 30 extracted human posterior teeth with various levels of subgingival deposits of calculus across 240 sites were used in a clinical simulation, with silicone impression material used to replicate periodontal soft tissues. The teeth were scored by two examiners by using three commercial LF systems (DIAGNOdent, DIAGNOdent Pen and KEY3). The silicone was removed, and the teeth were removed for photography at × 20 magnification under white or ultraviolet light. The surface area, thickness, and volume were calculated, and both linear least squares regression and nonlinear (Spearman's rank method) correlation coefficients were determined. Visible red LF digital readings showed better correlation to calculus volume than to surface area. Overall, the best performance was found for the KEY3 system (Spearman coefficient 0.59), compared to the Classic DIAGNOdent (0.56) and the DIAGNOdent Pen (0.49). These results indicate that while visible red LF systems vary somewhat in performance, their LF readings provide a useful estimation of the volume of subgingival calculus deposits present on teeth.

  9. Effective grain surface area in the formation of molecular hydrogen in interstellar clouds

    CERN Document Server

    Chakrabarti, Sandip Kumar; Acharyya, Kinsuk; Chakrabarti, Sonali

    2008-01-01

    In the interstellar clouds, molecular hydrogens are formed from atomic hydrogen on grain surfaces. An atomic hydrogen hops around till it finds another one with which it combines. This necessarily implies that the average recombination time, or equivalently, the effective grain surface area depends on the relative numbers of atomic hydrogen influx rate and the number of sites on the grain. Our aim is to discover this dependency. We perform a numerical simulation to study the recombination of hydrogen on grain surfaces in a variety of cloud conditions. We use a square lattice (with a periodic boundary condition) of various sizes on two types of grains, namely, amorphous carbon and olivine. We find that the steady state results of our simulation match very well with those obtained from a simpler analytical consideration provided the `effective' grain surface area is written as $\\sim S^{\\alpha}$, where, $S$ is the actual physical grain area and $\\alpha$ is a function of the flux of atomic hydrogen which is deter...

  10. Multiple bout rTMS on spatial working memory: a comparison study of two cortical areas.

    Science.gov (United States)

    Pearce, Alan J; Lum, Jarrad A G; Seth, Sunaina; Rafael, Olivia; Hsu, Chia-Ming K; Drury, Hannah G K; Tooley, Gregory A

    2014-07-01

    It has been established that acute (within-session) repetitive transcranial magnetic stimulation (rTMS) improves spatial working memory (SWM). However, questions remain regarding the safety and effectiveness of multiple bouts of rTMS and the optimal cortical area to stimulate. This preliminary study investigated, in healthy participants, multiple bouts of rTMS over the dorsolateral pre-frontal cortex (DLPFC), or posterior parietal cortex (PPC) on SWM. Twenty participants (10m, 10f), all naïve to rTMS, where randomized into a DLPFC or PPC group, receiving six sessions of rTMS (5Hz at 80% of motor threshold) every second day over two weeks. Prior to and post rTMS bouts, all participants completed testing for SWM measuring individuals' accuracy, strategy, and speed. Following repeated bouts of rTMS, significant improvements were observed with no contraindications in stimulating PPC but not DLPFC. This preliminary study has demonstrated that repeated rTMS bouts improve SWM safety providing potential for clinical application.

  11. Intercomparisons of land-surface parameterizations coupled to a limited area forecast model

    Science.gov (United States)

    Timbal, B.; Henderson-Sellers, A.

    1998-12-01

    The goal of the Project for Intercomparison of Land-surface Parameterization Schemes (PILPS) is to improve the understanding of the interactions between the atmosphere and the continental surface in climate and weather forecast models. In PILPS Phase 4(b), selected schemes are coupled to the Limited Area Prediction System (LAPS) developed by the Australian Bureau of Meteorology. To facilitate the comparison of PILPS schemes' behavior within LAPS, a single mode of coupling is selected: explicit coupling. This type of coupling is more flexible and avoids most of the problems raised when interchanging the surface schemes. Exploratory tests are conducted. Initially, experiments are run in which the land-surface schemes use the same parameters as in their original host models. Then, in other runs, the most important surface parameters are set constant in an attempt to reduce the scatter amongst the schemes' results. In order to understand the impact of initialisation of soil moisture on the schemes' results some extreme cases (wet and dry) are performed. The partitioning between surface fluxes is studied as well as the soil moisture budget. Both regional and local results are analysed. Sensitivity between LSS is found in the precipitation field with rainfall over the Australian continent altering by about 20%, but no significant change is found in the net radiation. The scatter in the surface energy fluxes amongst the schemes is large (up to 300 W m -2 locally, during the daytime peak) but is seldom affected by the choice of surface parameters. The dynamical range of flux partitioning between extremely dry and wet initialisation varies strongly amongst the schemes. Some major shortcoming with the BUCKET approach are seen in the re-evaporation of convective precipitation over dry land, in the very large evaporation from wet surfaces and the diurnal cycle of surface temperature.

  12. Nanotechnological Advances in Catalytic Thin Films for Green Large-Area Surfaces

    Directory of Open Access Journals (Sweden)

    Suzan Biran Ay

    2015-01-01

    Full Text Available Large-area catalytic thin films offer great potential for green technology applications in order to save energy, combat pollution, and reduce global warming. These films, either embedded with nanoparticles, shaped with nanostructuring techniques, hybridized with other systems, or functionalized with bionanotechnological methods, can include many different surface properties including photocatalytic, antifouling, abrasion resistant and mechanically resistive, self-cleaning, antibacterial, hydrophobic, and oleophobic features. Thus, surface functionalization with such advanced structuring methods is of significance to increase the performance and wide usage of large-area thin film coatings specifically for environmental remediation. In this review, we focus on methods to increase the efficiency of catalytic reactions in thin film and hence improve the performance in relevant applications while eliminating high cost with the purpose of widespread usage. However, we also include the most recent hybrid architectures, which have potential to make a transformational change in surface applications as soon as high quality and large area production techniques are available. Hence, we present and discuss research studies regarding both organic and inorganic methods that are used to structure thin films that have potential for large-area and eco-friendly coatings.

  13. Safety analysis of stability of surface gas drainage boreholes above goaf areas

    Institute of Scientific and Technical Information of China (English)

    LIU Yu-zhou; LI Xiao-hong

    2007-01-01

    As longwall caving mining method prevails rapidly in China coal mines, amount of gas emission from longwall faces and goaf area increased significantly. Using traditional gas drainage methods, such as drilling upward holes to roof strata in tailgate or drilling inseam and cross-measure boreholes, could not meet methane drainage requirements in a gassy mine. The alternative is to drill boreholes from surface down to the longwall goaf area to drain the gas out. As soon as a coal seam is extracted out, the upper rock strata above the goaf start to collapse or become fractured depending upon the rock characteristics and the height above the coal seam. During overlying rock strata being fractured,boreholes in the area may be damaged due to ground movement after the passage of the longwall face. The sudden damage of a borehole may cause a longwall production halt or even a serious mine accident. A theoretical calculation of the stability of surface boreholes in mining affected area is introduced along with an example of determination of borehole and casing diameters is given for demonstration. By using this method for the drilling design, the damage of surface boreholes caused by excessive mining induced displacement can be effectively reduced if not totally avoided. Borehole and casing diameters as well as characteristics of filling materials can be determined using the proposed method by calculating the horizontal movement and vertical stain at different borehole depths.

  14. Cortical Thickness, Surface Area and Subcortical Volume Differentially Contribute to Cognitive Heterogeneity in Parkinson's Disease.

    Directory of Open Access Journals (Sweden)

    Niels J H M Gerrits

    Full Text Available Parkinson's disease (PD is often associated with cognitive deficits, although their severity varies considerably between patients. Recently, we used voxel-based morphometry (VBM to show that individual differences in gray matter (GM volume relate to cognitive heterogeneity in PD. VBM does, however, not differentiate between cortical thickness (CTh and surface area (SA, which might be independently affected in PD. We therefore re-analyzed our cohort using the surface-based method FreeSurfer, and investigated (i CTh, SA, and (subcortical GM volume differences between 93 PD patients and 45 matched controls, and (ii the relation between these structural measures and cognitive performance on six neuropsychological tasks within the PD group. We found cortical thinning in PD patients in the left pericalcarine gyrus, extending to cuneus, precuneus and lingual areas and left inferior parietal cortex, bilateral rostral middle frontal cortex, and right cuneus, and increased cortical surface area in the left pars triangularis. Within the PD group, we found negative correlations between (i CTh of occipital areas and performance on a verbal memory task, (ii SA and volume of the frontal cortex and visuospatial memory performance, and, (iii volume of the right thalamus and scores on two verbal fluency tasks. Our primary findings illustrate that i CTh and SA are differentially affected in PD, and ii VBM and FreeSurfer yield non-overlapping results in an identical dataset. We argue that this discrepancy is due to technical differences and the subtlety of the PD-related structural changes.

  15. Natural and planted flora of the log mountain surface - mined demonstration area, Bell County, Kentucky

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, R.L. [Berea College, KY (United States); Wade, G.L. [USDA Forest Service, Burlington, VT (United States); Straw, R.A. [Univ. of Tennessee Plateau Experiment Station, Crossville, TN (United States)

    1996-12-31

    A descriptive study of the naturally invading and planted flora was conducted during 1984-1985 on a 14- and 21-year-old contour surface mine the 14.2 ha Log Mountain Demonstration Area (LMDA), in Bell County, Kentucky. Six habitats are designated from areas created from coal mining; the 1963 bench, 1970 bench, bench highwalls, mine outslopes, mine seeps, and coal haul-telephone microwave tower road. Twenty-four of 25 woody and herbaceous species (11 indigenous, 13 non-indigenous) have persisted from plantings by personnel of the Northeastern Forest Experiment Station, USDA Forest Service. We recommend 11 native and exotic woody and herbaceous species for planting on coal surface-mined areas. An annotated list of vascular plants comprises 360 taxa (286 indigenous, 74 non-indigenous) in 224 genera from 82 families. Taxa consist of 1 Lycopodiophyta, 1 Equisetophyta, 8 Polypodiophyta, 7 Pinophyta, and 343 Magnoliophyta. The most species-rich families are the Asteraceae (64), Poaceae (39), Fabaceae (20), Cyperaceae (16), Rosaceae (13), and Lamiaceae (11). A total of 155 Bell County distribution records were documented. Three threatened Kentucky species (Gentiana decora, Liparis loeselii, Silene ovata) were present in refugial habitats created by surface mining. The high species richness has resulted from native and naturalized invading species from the environs, native and exotic planted species, and species from the remnant seed bank. Forest vegetation is a complex mosaic of natural and semi-natural plant communities on the unplanted and planted areas of LMDA.

  16. Area Estimation of Deep-Sea Surfaces from Oblique Still Images.

    Directory of Open Access Journals (Sweden)

    Frederico Carvalho Dias

    Full Text Available Estimating the area of seabed surfaces from pictures or videos is an important problem in seafloor surveys. This task is complex to achieve with moving platforms such as submersibles, towed or remotely operated vehicles (ROV, where the recording camera is typically not static and provides an oblique view of the seafloor. A new method for obtaining seabed surface area estimates is presented here, using the classical set up of two laser devices fixed to the ROV frame projecting two parallel lines over the seabed. By combining lengths measured directly from the image containing the laser lines, the area of seabed surfaces is estimated, as well as the camera's distance to the seabed, pan and tilt angles. The only parameters required are the distance between the parallel laser lines and the camera's horizontal and vertical angles of view. The method was validated with a controlled in situ experiment using a deep-sea ROV, yielding an area estimate error of 1.5%. Further applications and generalizations of the method are discussed, with emphasis on deep-sea applications.

  17. Process variations in surface nano geometries manufacture on large area substrates

    DEFF Research Database (Denmark)

    Calaon, Matteo; Hansen, Hans Nørgaard; Tosello, Guido

    2014-01-01

    The need of transporting, treating and measuring increasingly smaller biomedical samples has pushed the integration of a far reaching number of nanofeatures over large substrates size in respect to the conventional processes working area windows. Dimensional stability of nano fabrication processes...

  18. Polarization effects and work function differences for transition metal surfaces: A perturbation LCAO MO approach

    Science.gov (United States)

    Shustorovich, Evgeny

    1981-05-01

    An analytical LCAO MO perturbation model has been developed for treating the polarization p-d contributions to the internal surface dipole moments of transition metal surfaces. The results are applied for treating changes in work functions (Ø) under chemisorption. The main conclusions are as follows. (1) Chemisorption of electropositive A (such as alkali metals) will always decrease Ø on all surfaces. (2) Chemisorption of electronegative A (such as H or halogens) can result in either increase or decrease in Ø depending on the nature of A and M. The smallest differences in A vs. M electronegativity are most likely to produce the paradoxical change ΔØ<0. The results obtained agree with experiment.

  19. Space-confined preparation of high surface area tungsten oxide and tungsten nitride inside the pores of mesoporous silica SBA-15

    DEFF Research Database (Denmark)

    Meyer, Simon; Beyer, Hans; Köhler, Klaus

    2015-01-01

    For the direct preparation of high surface area nitride materials, a lack of suitable precursors exists. Indirect preparation by gas phase nitridation (e.g. by ammonia) requires high temperatures and often results in sintering. The present work demonstrates that the space-confined preparation of ...

  20. How Much Global Burned Area Can Be Forecast on Seasonal Time Scales Using Sea Surface Temperatures?

    Science.gov (United States)

    Chen, Yang; Morton, Douglas C.; Andela, Niels; Giglio, Louis; Randerson, James T.

    2016-01-01

    Large-scale sea surface temperature (SST) patterns influence the interannual variability of burned area in many regions by means of climate controls on fuel continuity, amount, and moisture content. Some of the variability in burned area is predictable on seasonal timescales because fuel characteristics respond to the cumulative effects of climate prior to the onset of the fire season. Here we systematically evaluated the degree to which annual burned area from the Global Fire Emissions Database version 4 with small fires (GFED4s) can be predicted using SSTs from 14 different ocean regions. We found that about 48 of global burned area can be forecast with a correlation coefficient that is significant at a p forecasts may be possible with the aim of improving ecosystem management.

  1. Small carpal bone surface area, a characteristic of Turner's syndrome

    Energy Technology Data Exchange (ETDEWEB)

    Cleveland, R.H.; Done, S.; Correia, J.A.; Crawford, J.D.; Kushner, D.C.; Herman, T.E.

    1985-02-01

    An abnormality which has received little attention but may be easily recognized on radiographs of the hand of patients with Turner's syndrome is described. Eleven of thirty-one patients (35.5%) with Turner's syndrome were shown on radiographs of the hand to have a visually detectable smallness of the bone surface area of the carpus when compared to the area of the second through fifth metacarpals. Values for the ''C/M'' ratio (the area of the carpals divided by the area of the second through fifth metacarpals) were calculated for films of 31 individuals with gonadal dysgenesis and compared with those from bone age-matched films of seventy-six individuals with normal development of the hand and wrist. A consistent difference with minimal overlap was documented.

  2. Evaluation of three constructed soil areas after surface coal mining in Lauro Muller, Santa Catarina State, Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Campos, M.L.; Almeida, J.A.; Souza, L.S. [University of Estado Santa Catarina, Lages (Brazil)

    2003-12-01

    The present work evaluated chemical characteristics, clay content and mineralogy, and the spatial variability for some of these characteristics in three constructed soil areas after surface coal mining in Lauro Muller, Santa Catarina State, Brazil. The selected areas present differences in their topographic soil construction. The first area, Juliana Mine (MJ), was constructed in 1996 with materials that had been removed and stored separately before mining, as laid down in the rehabilitation plan. The second, Apertado Mine (MA), was constructed in 1996 with solum removed from an adjacent hilltop. The third area, Rio do Meio Mine (MRM), was only submitted to topographical reconstitution in 1983 with a mixture of coal pyrite residues and rock fragments from several soil layers. Soil samples were collected in a grid system, at three depths, and analyzed for pH, exchangeable Ca, Mg, K, Al and H + Al contents, and electric conductivity. Heavy metals and clay mineralogy were also analyzed in some selected samples. Representative analyses of pre-mining conditions, carried out in two soil profiles, were utilized for comparisons with the constructed soils. Values of the chemical soil characteristics and clay contents in all areas presented a high variability among the sampled points. The soil construction process utilized in MJ caused the highest uniformity of characteristics and provided the most adequate conditions for the establishment of vegetal species. In MA, the addition of pyrite coal material to the superficial soil is causing. a continuous soil acidification, as well as high salt concentrations. In the MRM area, which had been abandoned and exposed to pyrite coal deposition on the surface layer for an extended period, the soil is very acid and has already suffered intensive leaching of salts, Al, H + Al, and clay contents were the only tested variables that presented a defined model for semi-variance, with a range of 50-70 m.

  3. Research on the impact of impervious surface area on urban heat island in Jiangsu Province

    Science.gov (United States)

    Yang, Yingbao; Pan, Ping

    2011-10-01

    Land surface temperature (LST), vegetation index, and other surface characteristics that obtained from remote sensing data have been widely used to describe urban heat island (UHI) phenomenon, but through impervious surface area (ISA) to describe the phenomenon has only used in a few study areas in our country. In a high urbanization and high population density region like Jiangsu Province, a wide range of extraction of ISA to study its relationship with UHI is less. In this paper, we use multi-temporal remote sensing images as data sources, and extract ISA from it in a large-scale by using decision tree classifier (DTC) and linear spectral mixture analysis (LSMA). Then combine the average surface temperature from the sixth band of Landsat TM by mono-window algorithm for spatial analysis, to assess the change of the urban heat island temperature amplitude and its relationship with the urban development density, size and ecological environment. Finally we use statistical methods to analyze the relationship between ISA, LST and UHI. The results show that ISA has a positive correlation with surface temperature. The ratio of ISA is higher and the difference value of the temperature is larger, thus the UHI will be more obvious.

  4. Large area laser surface micro/nanopatterning by contact microsphere lens arrays

    Science.gov (United States)

    Sedao, X.; Derrien, T. J.-Y.; Romer, G. R. B. E.; Pathiraj, B.; Huis in `t Veld, A. J.

    2013-06-01

    Laser surface micro/nanopatterning by particle lens arrays is a well-known technique. Enhanced optical fields can be achieved on a substrate when a laser beam passes through a self-assembled monolayer of silica microspheres placed on the substrate. This enhanced optical field is responsible for ablative material removal from the substrate resulting in a patterned surface. Because of the laser ablation, the microspheres are often ejected from the substrate during laser irradiation. This is a major issue impeding this technique to be used for large area texturing. We explored the possibility to retain the spheres on the substrate surface during laser irradiation. A picosecond laser system (wavelength of 515 nm, pulse duration 6.7 ps, repetition rate 400 kHz) was employed to write patterns through the lens array on a silicon substrate. In this experimental study, the pulse energy was found to be a key factor to realize surface patterning and retain the spheres during the process. When the laser pulse energy is set within the process window, the microspheres stay on the substrate during and after laser irradiation. Periodic patterns of nanoholes can be textured on the substrate surface. The spacing between the nanoholes is determined by the diameter of the microspheres. The depth of the nanoholes varies, depending on the number of laser pulses applied and pulse energy. Large area texturing can be made using overlapping pulses obtained through laser beam scanning.

  5. Effect of particle surface area on ice active site densities retrieved from droplet freezing spectra

    Science.gov (United States)

    Beydoun, Hassan; Polen, Michael; Sullivan, Ryan C.

    2016-10-01

    Heterogeneous ice nucleation remains one of the outstanding problems in cloud physics and atmospheric science. Experimental challenges in properly simulating particle-induced freezing processes under atmospherically relevant conditions have largely contributed to the absence of a well-established parameterization of immersion freezing properties. Here, we formulate an ice active, surface-site-based stochastic model of heterogeneous freezing with the unique feature of invoking a continuum assumption on the ice nucleating activity (contact angle) of an aerosol particle's surface that requires no assumptions about the size or number of active sites. The result is a particle-specific property g that defines a distribution of local ice nucleation rates. Upon integration, this yields a full freezing probability function for an ice nucleating particle. Current cold plate droplet freezing measurements provide a valuable and inexpensive resource for studying the freezing properties of many atmospheric aerosol systems. We apply our g framework to explain the observed dependence of the freezing temperature of droplets in a cold plate on the concentration of the particle species investigated. Normalizing to the total particle mass or surface area present to derive the commonly used ice nuclei active surface (INAS) density (ns) often cannot account for the effects of particle concentration, yet concentration is typically varied to span a wider measurable freezing temperature range. A method based on determining what is denoted an ice nucleating species' specific critical surface area is presented and explains the concentration dependence as a result of increasing the variability in ice nucleating active sites between droplets. By applying this method to experimental droplet freezing data from four different systems, we demonstrate its ability to interpret immersion freezing temperature spectra of droplets containing variable particle concentrations. It is shown that general

  6. Cortical thickness and surface area in neonates at high risk for schizophrenia.

    Science.gov (United States)

    Li, Gang; Wang, Li; Shi, Feng; Lyall, Amanda E; Ahn, Mihye; Peng, Ziwen; Zhu, Hongtu; Lin, Weili; Gilmore, John H; Shen, Dinggang

    2016-01-01

    Schizophrenia is a neurodevelopmental disorder associated with subtle abnormal cortical thickness and cortical surface area. However, it is unclear whether these abnormalities exist in neonates associated with genetic risk for schizophrenia. To this end, this preliminary study was conducted to identify possible abnormalities of cortical thickness and surface area in the high-genetic-risk neonates. Structural magnetic resonance images were acquired from offspring of mothers (N = 21) who had schizophrenia (N = 12) or schizoaffective disorder (N = 9), and also matched healthy neonates of mothers who were free of psychiatric illness (N = 26). Neonatal cortical surfaces were reconstructed and parcellated as regions of interest (ROIs), and cortical thickness for each vertex was computed as the shortest distance between the inner and outer surfaces. Comparisons were made for the average cortical thickness and total surface area in each of 68 cortical ROIs. After false discovery rate (FDR) correction, it was found that the female high-genetic-risk neonates had significantly thinner cortical thickness in the right lateral occipital cortex than the female control neonates. Before FDR correction, the high-genetic-risk neonates had significantly thinner cortex in the left transverse temporal gyrus, left banks of superior temporal sulcus, left lingual gyrus, right paracentral cortex, right posterior cingulate cortex, right temporal pole, and right lateral occipital cortex, compared with the control neonates. Before FDR correction, in comparison with control neonates, male high-risk neonates had significantly thicker cortex in the left frontal pole, left cuneus cortex, and left lateral occipital cortex; while female high-risk neonates had significantly thinner cortex in the bilateral paracentral, bilateral lateral occipital, left transverse temporal, left pars opercularis, right cuneus, and right posterior cingulate cortices. The high-risk neonates also had significantly

  7. Microhardness changes of surface layer of HS 6-5-2 steel in the areas overlapping remelting obtained with the use of GTAW method

    OpenAIRE

    A. Bylica; Dziedzic, A.

    2008-01-01

    The work presents test results of microhardness of surface layer of HS 6-5-2 high-speed steel from areas overlapping remelting. Thesurface layer of the steel was remelted using the GTAW method. The microhardness was measured using the Vickers method. The workshows that the area, where the heat influence zone of the second remelting overlapping on the first remelting zone is characterizes by the microhardness lower about approx. 200 HV0,065.

  8. Use of time-of-flight mass spectrometry for large screening of organic pollutants in surface waters and soils from a rice production area in Colombia

    OpenAIRE

    Portolés Nicolau, Tania; Hernández Hernández, Félix; Díaz San Pedro, Ramón; Ibáñez Martínez, María; Bustos López, Martha Cristina; Botero Coy, Ana María; Fuentes, C. L.; Peñuela, Gustavo

    2012-01-01

    The irrigate district of Usosaldaña, an important agricultural area in Colombia mainly devoted to rice crop production, is subjected to an intensive use of pesticides. Monitoring these compounds is necessary to know the impact of phytosanitary products in the different environmental compartments. In this work, surface water and soil samples from different sites of this area have been analyzed by applying an analytical methodology for large screening based on the use of time-of-flight mass spe...

  9. Body surface area determined by whole-body CT scanning: need for new formulae?

    DEFF Research Database (Denmark)

    Villa, Chiara; Primeau, Charlotte; Hesse, Ulrik

    2017-01-01

    Calculation of the estimated body surface area (BSA) by body height and weight has been a challenge in the past centuries due to lack of a well-documented gold standard. More recently, available techniques such as 3D laser surface scanning and CT scanning may be expected to quantify the BSA...... Mimics software, and BSA values were automatically extracted from the program. They were compared with nine predictive equations from the literature. Remarkably, close correlations (r > 0·90) were found between BSA values from CT scans and those from the predictive formulae. A mean BSA of the 54 cadavers...

  10. The triazine-based porous organic polymer: Novel synthetic strategy for high specific surface area

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Kuen [Dept. of Chemistry, Hankuk University of Foreign Studies, Yongin (Korea, Republic of)

    2017-02-15

    A new type of microporous polymer has been successively synthesized via a simple polycondensation reaction with the 2,4-diaminotriazine moiety and dianhydride monomer. Diaminotriazine moieties in M1 especially can provide effective branching sites, resulting in high surface areas up to 1150 m{sup 2} /g. In addition, the specific pore structure of the polyimide POP in its solid state can be modified by the surface activation method. Therefore, it can be expected that the resulting material will be a promising candidate for gas storage, and with this synthetic strategy, various type of derivatives will also be optimized.

  11. Impervious Surface Area Mapping using Landsat Imagery: Applications to Hydrology and Land Use Change Monitoring

    Science.gov (United States)

    Smith, A.; Goetz, S. J.; Mazzacato, M. E.; Jantz, C.; Wright, R.

    2002-12-01

    Impervious surfaces include rooftops, roads, parking lots and other areas that are impermeable to moisture. As the amount of built environment around urban areas has increased, it has been widely recognized that more impervious surface area (ISA) results in greater volume and intensity of stream flow, which can degrade stream health and require expensive modifications to flood control structures. Other effects include increased urban "heat island" influences and changes in local weather. If impervious areas could be accurately mapped using satellite imagery, it would provide valuable input to many applications, from hydrologic modeling to land use planning. We have developed a method to map subpixel ISA with Landsat Thematic Mapper (TM) imagery and classification - regression tree algorithms. This approach provides highly accurate (90+ percent) maps of ISA, but also permits estimation of the proportion of each cell occupied by impervious materials (between 0-100 percent). We report on a recently completed a map of ISA for the entire 163,000 km2 Chesapeake Bay watershed, a region of highly altered land cover and rapid land use change. We also report on the mapping of change patterns, indicated by ISA changes between 1986 - 2001, in an 18,000 km2 area centered on Baltimore - Washington, D.C. We review the methods, issues, technical challenges, results, accuracy, and advantages of this approach, and provide an overview of various applications for which the products are currently being used.

  12. High surface area polyaniline nanofiber synthesized in compressed CO{sub 2} and its application to a hydrogen sensor

    Energy Technology Data Exchange (ETDEWEB)

    Pham, Quoc Minh; Kim, Sunwook [School of Chemical Engineering, University of Ulsan, Ulsan (Korea, Republic of)

    2016-01-15

    High surface area polyaniline (HSA PANI) nanofibers were synthesized through oxidative polymerization of aniline in compressed CO{sub 2} using cobalt chloride as an additive. SEM and TEM analyses showed that the HSA PANI nanofibers had a coarse surface of very thin nanofibers. The HSA PANI nanofibers had a fairly uniform diameter range of 70-90 nm with a length of 0.5-1 μm, and showed an electrical conductivity (EC) of 3.46 S/cm. TGA analysis revealed that the HSA PANI nanofibers had more doping substances than did ordinary PANI nanofibers. In the case of the HSA PANI nanofibers, direct measurement of the surface area using gas adsorption method showed high value of 68.4m{sup 2}/g, which was nearly twice that of ordinary PANI nanofibers. The HSA PANI nanofibers were used to fabricate the hydrogen sensor, exhibiting a large increase in resistance upon exposure to hydrogen gas. The hydrogen sensor in this work showed excellent characteristics, such as high sensitivity and short response time. The limit of detection (LOD) and limit of quantification (LOQ) of the hydrogen sensor were very low to show 40 ppm and 133 ppm of hydrogen, respectively.

  13. A microbiological assessment of the surface water quality in the Bodva river drainage area

    Directory of Open Access Journals (Sweden)

    Zdenka Maťašová

    2005-12-01

    Full Text Available This paper deals with the surface water quality assessment in the partial drainage area of the Bodva river and its tributaries. The water quality in the sampled areas ranged between polluted and strongly polluted. The main cause of the pollution is the increased abundance of coliform and thermo-tolerant coliform bacteria, and fecal streptococci. The reason the increase in their abundance is the dumping of the household waste water containing excrements and animal remains, and the unsatisfactorily treated water from the water treatment stations.

  14. Investigation of a Solution-Processable, Nonspecific Surface Modifier for Low Cost, High Work Function Electrodes.

    Science.gov (United States)

    Hinckley, Allison C; Wang, Congcong; Pfattner, Raphael; Kong, Desheng; Zhou, Yan; Ecker, Ben; Gao, Yongli; Bao, Zhenan

    2016-08-03

    We demonstrate the ability of the highly fluorinated, chemically inert copolymer poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) to significantly increase the work function of a variety of common electrode materials. The work function change is hypothesized to occur via physisorption of the polymer layer and formation of a surface dipole at the polymer/conductor interface. When incorporated into organic solar cells, an interlayer of PVDF-HFP at an Ag anode increases the open circuit voltage by 0.4 eV and improves device power conversion efficiency by approximately an order of magnitude relative to Ag alone. Solution-processable in air, PVDF-HFP thin films provide one possible route toward achieving low cost, nonreactive, high work function electrodes.

  15. Technical work plan for Surface Impoundments Operable Unit engineering support studies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    This document provides a comprehensive work plan which, when utilized as a data collection guide for field activities, will provide the necessary information required to complete a report on geotechnical properties of the sediments contained in the Surface Impoundments Operable Unit at Oak Ridge National Laboratory in Oak Ridge, Tennessee. Detailed guidance is provided for the following activities: collection of samples from the impoundments; compressive strength testing of the raw sediments; compressive strength testing of the structurally modified (lime and cement additives) sediments; testing for sediment physical properties and settling rates; testing for sediment dewatering characteristics; testing for radiation activity during the field work; testing for polymer additions that may enhance settling. The work plan additionally provides guidance and examples for the preparation of documents necessary to establish readiness for safe and satisfactory performance of the field activities. An outline for the format requested for a report of these data is also provided.

  16. How much global burned area can be forecast on seasonal time scales using sea surface temperatures?

    Science.gov (United States)

    Chen, Yang; Morton, Douglas C.; Andela, Niels; Giglio, Louis; Randerson, James T.

    2016-04-01

    Large-scale sea surface temperature (SST) patterns influence the interannual variability of burned area in many regions by means of climate controls on fuel continuity, amount, and moisture content. Some of the variability in burned area is predictable on seasonal timescales because fuel characteristics respond to the cumulative effects of climate prior to the onset of the fire season. Here we systematically evaluated the degree to which annual burned area from the Global Fire Emissions Database version 4 with small fires (GFED4s) can be predicted using SSTs from 14 different ocean regions. We found that about 48% of global burned area can be forecast with a correlation coefficient that is significant at a p climate index (OCI) 3 or more months prior to the month of peak burning. Continental regions where burned area had a higher degree of predictability included equatorial Asia, where 92% of the burned area exceeded the correlation threshold, and Central America, where 86% of the burned area exceeded this threshold. Pacific Ocean indices describing the El Niño-Southern Oscillation were more important than indices from other ocean basins, accounting for about 1/3 of the total predictable global burned area. A model that combined two indices from different oceans considerably improved model performance, suggesting that fires in many regions respond to forcing from more than one ocean basin. Using OCI—burned area relationships and a clustering algorithm, we identified 12 hotspot regions in which fires had a consistent response to SST patterns. Annual burned area in these regions can be predicted with moderate confidence levels, suggesting operational forecasts may be possible with the aim of improving ecosystem management.

  17. Effect of preparation surface area on the clinical outcome of full veneer crowns in dogs.

    Science.gov (United States)

    Riehl, Jessica; Soukup, Jason W; Collins, Caitlyn; Siverling, Sarah; Ploeg, Heidi-Lynn; Snyder, Christopher J

    2014-01-01

    Crown therapy is commonly used in veterinary medicine to provide support to teeth which have previously fractured, received root canal therapy, have significant wear, or experienced other detrimental removal of tooth substance. As with several aspects of veterinary medicine, many of the recommendations or guidelines for crown therapy originate from human dentistry, which are then transferred to veterinary patients. Due to the significant difference in the anatomy of teeth and function of the oral cavity between humans and dogs, these guidelines need to be studied to determine the appropriateness of their use in veterinary patients. This article evaluates the relationship between surface area of the preparation and clinical outcome of full veneer crown therapy of the canine tooth in dogs. Although there appeared to be a positive relationship between preparations with greater surface area and successful clinical outcome, it was not found to be statistically significant.

  18. Mapping of the cumulative β-ray dose on the ground surface surrounding the Fukushima area

    Science.gov (United States)

    Endo, Satoru; Kajimoto, Tsuyoshi; Tanaka, Kenichi; Nguyen, Thanh T.; Hayashi, Gohei; Imanaka, Tetsuji

    2015-01-01

    A large amount of the fission products released by the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident on 11 March 2011 was deposited in a wide area from Tohoku to northern Kanto. A map of the estimated cumulative β-ray dose (70 μm dose equivalent) on the soil surface for one year after the FDNPP accident has been prepared using previously reported calculation methods and the 2-km mesh survey data by MEXT. From this map of estimated dose, areas with a high cumulative β-ray dose on the soil surface for one year after the FDNPP accident were found to be located in the Akogi-Teshichiro to Akogi-Kunugidaira region in Namie Town, and in the southern Futaba Town to the northern Tomioka Town region. The highest estimated cumulative β-ray dose was 710 mSv for one year at Akogi-Teshichiro, Namie Town. PMID:26519736

  19. Enhanced hydrogen storage property of magnesium hydride by high surface area Raney nickel

    Energy Technology Data Exchange (ETDEWEB)

    Bhat, Vinay; Rougier, Aline; Aymard, Luc; Tarascon, Jean-Marie [University of Picardie, Amiens (France); Nazri, Gholam-Abbas [GMR and D, Chemical and Environmental Sciences Lab, Warren, MI (United States)

    2007-12-15

    This paper describes the improvement of hydrogen sorption capacity and kinetics of MgH{sub 2} by addition of high surface area ({approx}100m{sup 2}/g) Raney nickel (RN). Herein, we demonstrate that enhanced hydrogen sorption by MgH{sub 2} due to RN is not only linked to the catalytic nature of Ni, but also correlates well with the BET surface area for the MgH{sub 2}-Ni composites. The Raney Ni also tends to form the less stable Mg{sub 2}NiH{sub 4} hydrides, which desorb hydrogen at much higher pressure as compared with that of the MgH{sub 2}. We have observed a significant improvement in hydrogen sorption capacity and increase in pressure of hydrogen desorption for MgH{sub 2} catalyzed by RN. (author)

  20. Pore structure and surface area of silica SBA-15: influence of washing and scale-up

    Directory of Open Access Journals (Sweden)

    Jörg P. Thielemann

    2011-02-01

    Full Text Available The removal of the surfactant (EO20PO70EO20 by washing before final calcination is a critical step in the synthesis of silica SBA-15. In contrast to washing with pure water or ethanol, washing with water and ethanol may, depending on the quantity of solvent used, alter the homogeneity and order of the pores, but also lead to an increase of the surface area of SBA-15. A reduction of solvent volume and a controlled washing protocol allow the synthesis of high surface area SBA-15 materials with a narrow monomodal pore size distribution. For larger batch sizes the influence of the quantity of solvent on the quality of the SBA-15 is reduced.

  1. Dynamics of spider glue adhesion: effect of surface energy and contact area

    Science.gov (United States)

    Amarpuri, Gaurav; Chen, Yizhou; Blackledge, Todd; Dhinojwala, Ali

    Spider glue is a unique biological adhesive which is humidity responsive such that the adhesion continues to increase upto 100% relative humidity (RH) for some species. This is unlike synthetic adhesives that significantly drop in adhesion with an increase in humidity. However, most of adhesion data reported in literature have used clean hydrophilic glass substrate, unlike the hydrophobic, and charged insect cuticle surface that adheres to spider glue in nature. Previously, we have reported that the spider glue viscosity changes over five orders of magnitude with humidity. Here, we vary the surface energy and surface charge of the substrate to test the change in Larnioides cornutus spider glue adhesion with humidity. We find that an increase in both surface energy and surface charge density increases the droplet spreading and there exists an optimum droplet contact area where adhesion is maximized. Moreover, spider glue droplets act as reusable adhesive for low energy hydrophobic surface at the optimum humidity. These results explain why certain prey are caught more efficiently by spiders in their habitat. The mechanism by which spider species tune its glue adhesion for local prey capture can inspire new generation smart adhesives.

  2. Changing surface-atmosphere energy exchange and refreezing capacity of the lower accumulation area, West Greenland

    DEFF Research Database (Denmark)

    Charalampidis, C.; Van As, D.; Box, J. E.

    2015-01-01

    negative surface mass budget (SMB) and surface meltwater run-off. The observed run-off was due to a large ice fraction in the upper 10 m of firn that prevented meltwater from percolating to available pore volume below. Analysis reveals an anomalously low 2012 summer-averaged albedo of 0.71 (typically ∼ 0.......78), as meltwater was present at the ice sheet surface. Consequently, during the 2012 melt season, the ice sheet surface absorbed 28 % (213 MJ m-2) more solar radiation than the average of all other years. A surface energy balance model is used to evaluate the seasonal and interannual variability of all surface......We present 5 years (2009-2013) of automatic weather station measurements from the lower accumulation area (1840 m a.s.l.-above sea level) of the Greenland ice sheet in the Kangerlussuaq region. Here, the summers of 2010 and 2012 were both exceptionally warm, but only 2012 resulted in a strongly...

  3. Influence of reconstruction water-bearing levels on surface displacement of post-mining areas

    Science.gov (United States)

    Milczarek, Wojciech; Blachowski, Jan; Grzempowski, Piotr

    2014-05-01

    The phenomenon of secondary deformation characteristic of the post-mining areas is not sufficiently recognized. For ground surfaces phenomenon may be continuous or discontinuous. There is no sufficient information that describes behavior of the rock mass in the long term after end of exploitation. It is considered that this phenomenon is gradually disappears with end of exploitation. Reliable quantitative data comes only from the analysis of direct measurements in selected areas: geodetic and satellites measurements. Analyzing current situation of operating mines can be said that in the near years, more centers will limit the mining of coal mining. This will contribute to separation further of post-mining areas, in which will be required to maintaining a permanent monitoring and making predictions on the impact of ended exploitation of the rock mass surface. This will be particularly important for highly urbanized areas. This study used finite element method (FEM) to describe phenomenon of reconstruction water-bearing levels and its impact on displacement on the ground surface. It was assumed that significant factors that influence the occurrence and size of secondary deformations are: reconstruction of water-bearing levels in the prior drainer rock mass, size of past exploitation, spatial distribution of coal seams and geological and tectonic structure has been assumed. The transversally isotropic model of six elastic constants: E1 = E2, E3, ν = ν12, ν13, G12, G13 has been assumed to describe of rock mass in the numerical calculations. Geometrical models used in the numerical calculations have been developed using GIS tools. For the study two-dimensional and three-dimensional models characterized by different geological conditions and different configuration of mining data have been developed. The results obtained displacements of the ground surface for the period of mining activity has been verified with the results based on the Knothe theory. The results of

  4. Controlling Structure and Properties of High Surface Area Nonwoven Materials via Hydroentangling

    Science.gov (United States)

    Luzius, Dennis

    Hydroentangling describes a technique using a series of high-velocity water jets to mechanically interlock and entangle fibers. Over the last decades researchers worked on a fundamental understanding of the process and the factors influencing the properties of the final nonwoven material. Recent studies discovered hydroentangling to be capable to create unique, knot-like structures characterized by high- and low density regions, which are believed to have interesting properties for filtration applications. However, just little is known about the impact of hydroentangling parameters on the properties of filtration media to this day. In this study we report on the effect of various hydroentangling parameters, such as jet spacing, manifold pressure, number of manifolds but also specific energy on the structure and properties of high surface area nonwoven materials. Latter was achieved by different bicomponent fiber technologies and subsequent treatments removing the sacrificial compound from the structure. The highest BET surface area was measured to be 3.5 m2 g-1 and the smallest mean fiber size about 0.5 mum. Hydroentangling with large jet spacing was found to be a parameter significantly enhancing the filtration properties of caustic-treated island-in-the-sea nonwoven materials. Moreover, improved capture efficiencies and reduced pressure drops were achieved by reducing the manifold pressure and therefore specific energy during hydroentangling. Jet spacing but not island count was found to be the dominant factor influencing the structure and properties of island-in-the-sea nonwovens. Contrary to our initial expectations increasing the island count and thus decreasing the fiber size did not result in better filtration properties. Mixed media nonwoven structures made from homocomponent and island-in-the-sea fibers were found to have lower densities, higher air permeabilities and better quality factors compared to island-in-the-sea structures hydroentangled under the

  5. Surface area of lactose and lactose granulates on consolidation and compaction

    OpenAIRE

    Riepma, Klaas Alouis

    1993-01-01

    This dissertation discusses the effect of short time storage at different conditions on the strength and the specific BET surface area of lactose tablets. In addition, some aspects are studied of the consolidation and compaction properties of crystalline lactose fractions in heterogeneous systems. The crystalline lactose types used are: a-lactose monohydrate, anhydrous a-lactose, crystalline B-lactose and roller dried B-lactose. ... Zie: Summary

  6. Synthetic process for preparation of high surface area electroactive compounds for battery applications

    Energy Technology Data Exchange (ETDEWEB)

    Evenson, Carl; Mackay, Richard

    2013-07-23

    A process is disclosed for the preparation of electroactive cathode compounds useful in lithium-ion batteries, comprising exothermic mixing of low-cost precursors and calcination under appropriate conditions. The exothermic step may be a spontaneous flameless combustion reaction. The disclosed process can be used to prepare any lithium metal phosphate or lithium mixed metal phosphate as a high surface area single phase compound.

  7. Estimation of reactive surface area using a combined method of laboratory analyses and digital image processing

    Science.gov (United States)

    Ma, Jin; Kong, Xiang-Zhao; Saar, Martin O.

    2017-04-01

    Fluid-rock interactions play an important role in the engineering processes such as chemical stimulation of enhanced geothermal systems and carbon capture, utilization, and storage. However, these interactions highly depend on the accessible reactive surface area of the minerals that are generally poorly constrained for natural geologic samples. In particular, quantifying surface area of each reacting mineral within whole rock samples is challenging due to the heterogeneous distribution of minerals and pore space. In this study, detailed laboratory analyses were performed on sandstone samples from deep geothermal sites in Lithuania. We measure specific surface area of whole rock samples using a gas adsorption method (so-called B.E.T.) with N2 at a temperature of 77.3K. We also quantify their porosity and pore size distribution by a Helium gas pycnometer and a Hg porosimetry, respectively. Rock compositions are determined by a combination of X-ray fluorescence (XRF) and quantitative scanning electron microscopy (SEM) - Energy-dispersive X-ray spectroscopy (EDS), which are later geometrically mapped on images of two-dimensional SEM- Backscattered electrons (BSE) with a resolution of 1.2 μm and three-dimensional micro-CT with a resolution of 10.3 μm to produce a digital mineral map for further constraining the accessibility of reactive minerals. Moreover, we attempt to link the whole rock porosity, pore size distribution, and B.E.T. specific surface area with the digital mineral maps. We anticipate these necessary analyses to provide in-depth understanding of fluid sample chemistry from later hydrothermal reactive flow-through experiments on whole rock samples at elevated pressure and temperature.

  8. A simple and highly effective process for the preparation of activated carbons with high surface area

    Energy Technology Data Exchange (ETDEWEB)

    Li Ying, E-mail: liyingjlu@163.com [College of Chemistry, Jilin University, Changchun 130012 (China); Ding Xuefeng; Guo Yupeng; Wang Lili; Rong Chunguang; Qu Yuning; Ma Xiaoyu [College of Chemistry, Jilin University, Changchun 130012 (China); Wang Zichen, E-mail: wangzc@jlu.edu.cn [College of Chemistry, Jilin University, Changchun 130012 (China)

    2011-06-15

    Highlights: {yields} High surface area activated carbon can be prepared by rice husk H{sub 3}PO{sub 4} without pretreatment. {yields} The characteristics of the activated carbon were greatly influenced by post-processing method. {yields} The lower SiO{sub 2} content of the activated carbons, the higher pore volume the carbons had. {yields} Some silica in rice husk reacted with H{sub 3}PO{sub 4} to form SiP{sub 2}O{sub 7} which could be removed by post-process. - Abstract: Activated carbons with high surface area were prepared by phosphoric acid as activation agent and rice husks as precursors. It was found that the characteristics of the activated carbons were influenced not only by the preparation but also by the post-processing method. The high surface area of the activated carbons was prepared under the optimum condition (50% H{sub 3}PO{sub 4} with impregnation ratio of 5:1, activation temperature of 500 deg. C, activation time of 0.5 h, wash water temperature of 100 deg. C). SiO{sub 2} content could affect the surface area of activated carbons, either. The lower SiO{sub 2} content of the activated carbons, the higher pore volume the carbons had. The SiO{sub 2} content was 11.2% when used the optimum condition. The explanation was that silicon element in rice husks reacted with H{sub 3}PO{sub 4} to form silicon phosphate (SiP{sub 2}O{sub 7}), and it could be proved further by X-ray diffraction analysis, SiP{sub 2}O{sub 7} could be removed by post-process.

  9. n-Alkylamine-assisted preparation of a high surface area vanadyl phosphate/tetraethylorthosilicate nanocomposite

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, João Paulo L., E-mail: billbrujah@yahoo.com.br [Departamento de Química, Faculdade de Filosofia, Ciências e Letras de Ribeirão Preto, Universidade de São Paulo, Av. Bandeirantes 3900, Ribeirão Preto, SP 14040-901 (Brazil); Zampronio, Elaine C.; Oliveira, Herenilton P. [Departamento de Química, Faculdade de Filosofia, Ciências e Letras de Ribeirão Preto, Universidade de São Paulo, Av. Bandeirantes 3900, Ribeirão Preto, SP 14040-901 (Brazil)

    2013-02-15

    Graphical abstract: CuK{sub α} X-ray diffraction patterns of the VP, VPOc, VPOcT, VPOcT200 and VPOcT500. Highlights: ► TEOS and octylamine incorporation into the VP was achieved by expanding the lamellar. ► The specific surface area increased from 15 m{sup 2} g{sup −1} in VP to 237 m{sup 2} g{sup −1} in VPOcT. ► The VPOcT exhibited thermal resistance up to 200 °C in air. ► Upon thermal treatment up to 500 °C, the surface area increased to 838 m{sup 2} g{sup −1}. -- Abstract: We have developed a vanadyl phosphate/tetraethylorthosilicate (VPO/TEOS) nanocomposite comprised of silicate chains interleaved with VPO layers, prepared by using an n-alkylamines such as octylamine as the structure directing agent. The nanocomposites were synthesized by reacting amine-intercalated vanadyl phosphate with tetraethylorthosilicate via the soft chemistry approach. The synthetic procedure encompassed the exfoliation of the layered vanadyl phosphate as well as the reorganization of this exfoliated solid into a mesostructured lamellar phase with the same V–P–O connectivity as in the original matrix. TEOS incorporation into the vanadyl phosphate was achieved by expanding the lamellar structure with n-alkylamine (Δd = 13 Å with n-octylamine). The specific surface area increased from 15 m{sup 2} g{sup −1} in the vanadyl phosphate matrix to 237 m{sup 2} g{sup −1} in VPOcT, and the isotherm curves revealed the characteristic hysteresis of mesoporous materials. Upon thermal treatment up to 500 °C, the surface area increased to 837 m{sup 2} g{sup −1}, which is suitable for catalytic purposes.

  10. CuO/ZnO catalysts for methanol steam reforming: The role of the support polarity ratio and surface area

    OpenAIRE

    2015-01-01

    The effect of surface area and polarity ratio of ZnO support on the catalytic properties of CuO/ZnO catalyst for methanol steam reforming (MSR) are studied. The surface area of ZnO was varied changing the calcination temperature and its polarity ratio was modified using different Zn precursors, zinc acetate and zinc nitrate. It was found that the copper dispersion and copper surface area increase with the surface area of the ZnO support and the polarity ratio of ZnO strongly in...

  11. Government conservation policies on Mexican coastal areas: is "top-down" management working?

    Directory of Open Access Journals (Sweden)

    Héctor Nava

    2011-12-01

    . Current conditions are the result of "top-down" conservation strategies in Zihuatanejo, as Federal and Municipal authorities do not coordinate, disregard local community in coral reef management, and ignore the intimate relationship between the coastal and marine realms. This work confirms the importance of conservation strategies with a holistic approach, considering both terrestrial and marine ecosystems in coastal areas; and that these initiatives should include local coastal communities in management and decision-taking processes done by government authorities. Rev. Biol. Trop. 59 (4: 1487-1501. Epub 2011 December 01.Las estrategias integrales son clave para lograr efectividad en la conservación de las áreas costeras. Para discutir la importancia de las estrategias holísticas en iniciativas de conservación, usamos como caso de estudio los arrecifes coralinos de Zihuatanejo Guerrero. En primer lugar, analizamos el valor paisajístico terrestre y marino de la zona costera y posteriormente usamos indicadores biológicos y ambientales de degradación en arrecifes coralinos. El valor paisajístico mostró que Manzanillo Beach tiene el mayor potencial para desarrollar iniciativas de conservación (TtV=14.2. No obstante, ambos arrecifes se enfrentan a elevados niveles de sedimentación (hasta 1.16kg/m2d y baja transparencia del agua (<5m causados por el aumento de la erosión de la costa, como consecuencia del cambio de uso del suelo. La alta cobertura de corales muertos (23.6% y algas (hasta un 29% en los arrecifes reflejan su manejo inadecuado. Estas condiciones son resultado de las estrategias de conservación usadas principalmente por las autoridades gubernamentales, que en muchos casos no se encuentran coordinadas y no consideran a la población local en el manejo de los recursos. Estos resultados confirman la importancia de las estrategias de conservación con una visión holística del ecosistema terrestre-marino en las áreas costeras. Estas iniciativas deben

  12. Mesoporous ZrO2 fibers with enhanced surface area and the application as recyclable absorbent

    Science.gov (United States)

    Yu, Zhichao; Liu, Benxue; Zhou, Haifeng; Feng, Cong; Wang, Xinqiang; Yuan, Kangkang; Gan, Xinzhu; Zhu, Luyi; Zhang, Guanghui; Xu, Dong

    2017-03-01

    Highly crystalline mesoporous zirconia fibers with high surface area have been prepared by the use of electrospinning combined with precursors method. The obtained precursor fibers were treated in water steam and directly in air at different temperature respectively. Compared with the direct calcination in air, the water steam cannot only promote the crystallization of ZrO2 but also effectively remove off the organics and prevent the pore structure collapse. Moreover, through adding hydrochloric acid to modify the solution pH value, the obtained t-ZrO2 fibers treated in water steam at 300 °C have high surface area and large pore volume of 232.70 m2 g-1 and 0.36 cm3 g-1. The formation mechanism of the mesostucture was studied and the schematic was represented. Compared with the previous reports of mesoporous ZrO2 fibers, the as-synthesized materials exhibited the high crystallinity, large surface area and the long-range order mesostructure.The adsorption of Congo red indicates that the samples have a high adsorption capacity of 103.46 mg g-1 and long-periodic repeated availability.

  13. Role of Surface Area, Primary Particle Size, and Crystal Phase on Titanium Dioxide Nanoparticle Dispersion Properties

    Directory of Open Access Journals (Sweden)

    Suvachittanont Sirikalaya

    2011-01-01

    Full Text Available Abstract Characterizing nanoparticle dispersions and understanding the effect of parameters that alter dispersion properties are important for both environmental applications and toxicity investigations. The role of particle surface area, primary particle size, and crystal phase on TiO2 nanoparticle dispersion properties is reported. Hydrodynamic size, zeta potential, and isoelectric point (IEP of ten laboratory synthesized TiO2 samples, and one commercial Degussa TiO2 sample (P25 dispersed in different solutions were characterized. Solution ionic strength and pH affect titania dispersion properties. The effect of monovalent (NaCl and divalent (MgCl2 inert electrolytes on dispersion properties was quantified through their contribution to ionic strength. Increasing titania particle surface area resulted in a decrease in solution pH. At fixed pH, increasing the particle surface area enhanced the collision frequency between particles and led to a higher degree of agglomeration. In addition to the synthesis method, TiO2 isoelectric point was found to be dependent on particle size. As anatase TiO2 primary particle size increased from 6 nm to 104 nm, its IEP decreased from 6.0 to 3.8 that also results in changes in dispersion zeta potential and hydrodynamic size. In contrast to particle size, TiO2 nanoparticle IEP was found to be insensitive to particle crystal structure.

  14. Synthesis of high surface area nanometer magnesia by solid-state chemical reaction

    Institute of Scientific and Technical Information of China (English)

    GUAN Hongbo; WANG Pei; ZHAO Biying; ZHU Yuexiang; XIE Youchang

    2007-01-01

    Nanometer MgO samples with high surface area,small crystal size and mesoporous texture were synthesized tion process accelerated the sintering of MgO,and MgO with calcining its precursor in flowing dry nitrogen at 520℃ for 4 h.The samples were characterized by X-ray diffraction,N2 adsorption,transmission electron microscopy,thermogravimetry,and differential thermal analysis.The as-prepared MgO was composed of nanocrystals with a size of about 4-5 nm and formed a wormhole-like porous structure.The MgO also had good thermal stability,and its surface areas remained at 357 and 153 m2.g-1 after calcination at 600 and 800℃ for 2 h,respectively.Compared with the MgO sample prepared by the precipitation method,MgO prepared by solid-state chemical reaction has uniform pore size distribution,surface area,and crystal size.The solid-state chemical method has the advantages of low cost,low pollution,and high yield,therefore it appears to be a promising method in the industrial manufacture of nanometer MgO.

  15. Hierarchical porous carbon with ultrahigh surface area from corn leaf for high-performance supercapacitors application

    Science.gov (United States)

    Yang, Xiaoqing; Li, Chengfei; Chen, Yue

    2017-02-01

    A new class of hierarchical porous carbon (HPC) with ultrahigh surface area is successfully fabricated by carefully selecting biomass carbon precursors and activation reagent, through which corn leaf (CL) with natural well-defined macropore channels is used as the carbon precursor, and H3PO4 is used as the active agent by virtue of its pore-widening effect. The as-prepared CL-based HPC (CLHPC) with a H3PO4/semi-carbonized CL mass ratio of 2 (CLHPC-2) demonstrates the highest specific surface area of 2507 m2 g-1 donated by 28.3% of micropore and 71.6% of mesopore, while maintaining the channel-like macroporous structure derived from the well-defined natural structure in CL. The combination of the hierarchical porous structure and ultrahigh surface area enables rapid electrolyte diffusion and sufficient active sites for charge accumulation. As a result, CLHPC-2 exhibits excellent electrochemical performance, such as high specific capacitance of 230 F g-1 at the current density of 0.1 A g-1, excellent high-rate capability (retention of 91% from 0.1 to 5 A g-1), and good cycling stability (99% capacitance retention after 10 000 cycles).

  16. Mass, surface area and number metrics in diesel occupational exposure assessment.

    Science.gov (United States)

    Ramachandran, Gurumurthy; Paulsen, Dwane; Watts, Winthrop; Kittelson, David

    2005-07-01

    While diesel aerosol exposure assessment has traditionally been based on the mass concentration metric, recent studies have suggested that particle number and surface area concentrations may be more health-relevant. In this study, we evaluated the exposures of three occupational groups-bus drivers, parking garage attendants, and bus mechanics-using the mass concentration of elemental carbon (EC) as well as surface area and number concentrations. These occupational groups are exposed to mixtures of diesel and gasoline exhaust on a regular basis in various ratios. The three groups had significantly different exposures to workshift TWA EC with the highest levels observed in the bus garage mechanics and the lowest levels in the parking ramp booth attendants. In terms of surface area, parking ramp attendants had significantly greater exposures than bus garage mechanics, who in turn had significantly greater exposures than bus drivers. In terms of number concentrations, the exposures of garage mechanics exceeded those of ramp booth attendants by a factor of 5-6. Depending on the exposure metric chosen, the three occupational groups had quite different exposure rankings. This illustrates the importance of the choice of exposure metric in epidemiological studies. If these three occupational groups were part of an epidemiological study, depending on the metric used, they may or may not be part of the same similarly exposed group (SEG). The exposure rankings (e.g., low, medium, or high) of the three groups also changes with the metric used. If the incorrect metric is used, significant misclassification errors may occur.

  17. Rippled area formed by surface plasmon polaritons upon femtosecond laser double-pulse irradiation of silicon.

    Science.gov (United States)

    Derrien, Thibault J-Y; Krüger, Jörg; Itina, Tatiana E; Höhm, Sandra; Rosenfeld, Arkadi; Bonse, Jörn

    2013-12-02

    The formation of near-wavelength laser-induced periodic surface structures (LIPSS) on silicon upon irradiation with sequences of Ti:sapphire femtosecond laser pulse pairs (pulse duration 150 fs, central wavelength 800 nm) is studied theoretically. For this purpose, the nonlinear generation of conduction band electrons in silicon and their relaxation is numerically calculated using a two-temperature model approach including intrapulse changes of optical properties, transport, diffusion and recombination effects. Following the idea that surface plasmon polaritons (SPP) can be excited when the material turns from semiconducting to metallic state, the "SPP active area" is calculated as function of fluence and double-pulse delay up to several picoseconds and compared to the experimentally observed rippled surface areas. Evidence is presented that multi-photon absorption explains the large increase of the rippled area for temporally overlapping pulses. For longer double-pulse delays, relevant relaxation processes are identified. The results demonstrate that femtosecond LIPSS on silicon are caused by the excitation of SPP and can be controlled by temporal pulse shaping.

  18. Growth of Hierarchically Structured High-Surface Area Alumina on FeCrAl Alloy Wires

    Directory of Open Access Journals (Sweden)

    Chandni Rallan

    2013-01-01

    Full Text Available The formation of metastable alumina phases due to the oxidation of commercial FeCrAl alloy wires (0.5 mm thickness at various temperatures and time periods has been examined. Samples were isothermally oxidised in air using a thermogravimetric analyzer (TGA. The morphology of the oxidised samples was analyzed using an Electronic Scanning Electron Microscope (ESEM and X-ray on the surface analysis was done using an Energy Dispersive X-Ray (EDX analyzer. The technique of X-Ray Diffraction (XRD was used to characterize the phase of the oxide growth. The entire study showed that it was possible to grow high-surface area gamma alumina on the FeCrAl alloy wire surfaces when isothermally oxidised above 800°C over several hours.

  19. Evapotranspiration and runoff from large land areas: Land surface hydrology for atmospheric general circulation models

    Science.gov (United States)

    Famiglietti, J. S.; Wood, Eric F.

    1993-01-01

    A land surface hydrology parameterization for use in atmospheric GCM's is presented. The parameterization incorporates subgrid scale variability in topography, soils, soil moisture and precipitation. The framework of the model is the statistical distribution of a topography-soils index, which controls the local water balance fluxes, and is therefore taken to represent the large land area. Spatially variable water balance fluxes are integrated with respect to the topography-soils index to yield our large topography-soils distribution, and interval responses are weighted by the probability of occurrence of the interval. Grid square averaged land surface fluxes result. The model functions independently as a macroscale water balance model. Runoff ratio and evapotranspiration efficiency parameterizations are derived and are shown to depend on the spatial variability of the above mentioned properties and processes, as well as the dynamics of land surface-atmosphere interactions.

  20. METHODS TO DETECT ATMOSPHERIC AND SURFACE HEAT ISLANDS IN URBAN AREAS

    Directory of Open Access Journals (Sweden)

    I. HERBEL

    2015-10-01

    Full Text Available Intensification of the urbanization process and its associated climatic effects is nowadays a major problem of large cities worldwide. One of these climatic effects is the urban heat island (UHI, that implies increased air and surface temperature values in the city when compared to the nearby rural areas. This phenomenon threatens the health of the population, especially during heat waves, affects the quality of the environment and the quality of life, and also generates significant costs to ensure the inhabitants' thermal comfort. In this study we present a review of the UHI concept and three of the main methods used to detect the atmospheric and surface urban heat islands. Satellite image data analysis seems an easier and time-saving solution, but due to its limitations, we consider that a combination of both surfaces and lower atmospheric layer temperature data analysis is the best choice in order to get accurate results of the intensity and spatial extension of the UHI.

  1. Determination of the specific surface area of snow using ozonation of 1,1-diphenylethylene.

    Science.gov (United States)

    Ray, Debajyoti; Kurková, Romana; Hovorková, Ivana; Klán, Petr

    2011-12-01

    We measured the kinetics of ozonation reaction of 1,1-diphenylethylene (DPE) in artificial snow, produced by shock freezing of DPE aqueous solutions sprayed into liquid nitrogen. It was demonstrated that most of the reactant molecules are in direct (productive) contact with gaseous ozone, thus the technique produces snow with organic molecules largely ejected to the surface of snow grains. The kinetic data were used to evaluate the snow specific surface area (∼70 cm(2) g(-1)). This number is a measure of the availability of the molecules on the surface for chemical reaction with gaseous species. The experimental results were consistent with the Langmuir-Hinshelwood type reaction mechanism. DPE represents environmentally relevant compounds such as alkenes which can react with atmospheric ozone, and are relatively abundant in natural snow. For typical atmospheric ozone concentrations in polar areas (20 ppbv), we estimated that half-life of DPE on the surface of snow grains is ∼5 days at submonolayer coverages and -15 °C.

  2. Description of climate, surface hydrology, and near-surface hydrogeology. Preliminary site description. Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, Per-Olof [Artesia Grundvattenkonsult AB, Stockholm (Sweden); Werner, Kent [SWECO VIAK AB/Golder Associates AB, Stockholm (Sweden); Bosson, Emma; Berglund, Sten [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Juston, John [DBE Sweden, Uppsala (Sweden)

    2005-06-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is conducting site investigations at two different locations, the Forsmark and Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The results from the investigations at the sites are used as a basic input to the development of Site Descriptive Models (SDM). The SDM shall summarise the current state of knowledge of the site, and provide parameters and models to be used in further analyses within Safety Assessment, Repository Design and Environmental Impact Assessment. The present report is a background report describing the meteorological conditions and the modelling of surface hydrology and near-surface hydrogeology in support of the Forsmark version 1.2 SDM based on the data available in the Forsmark 1.2 'data freeze' (July 31, 2004). The groundwater is very shallow, with groundwater levels within one meter below ground as an annual mean for almost all groundwater monitoring wells. Also, the annual groundwater level amplitude is less than 1.5 m for most wells. The shallow groundwater levels mean that there is a strong interaction between evapotranspiration, soil moisture and groundwater. In the modelling, surface water and near-surface groundwater divides are assumed to coincide. The small-scale topography implies that many local, shallow groundwater flow systems are formed in the Quaternary deposits, overlaying more large-scale flow systems associated with groundwater flows at greater depths. Groundwater level time series from wells in till and bedrock within the same areas show a considerably higher groundwater level in the till than in the bedrock. The observed differences in levels are not fully consistent with the good hydraulic contact between overburden and bedrock indicated by the hydraulic tests in the Quaternary deposits. However, the relatively lower groundwater levels in the bedrock may be caused by the horizontal to sub-horizontal highly

  3. Influence of Al-oxide on pesticide sorption to woody biochars with different surface areas.

    Science.gov (United States)

    Shou, Jianxin; Dong, Huaping; Li, Jianfa; Zhong, Jiaxing; Li, Saijun; Lü, Jinhong; Li, Yimin

    2016-10-01

    Biochars' properties will change after application in soil due to the interactions with soil constituents, which would then impact the performance of biochars as soil amendment. For a better understanding on these interactions, two woody biochars of different surface areas (SA) were physically treated with aluminum oxide (Al-oxide) to investigate its potential influence on biochars' sorption property. Both the micropore area and mesopore (17∼500 Å in diameter) area of the low-SA biochar were enhanced by at least 1.5 times after treatment with Al-oxide, whereas the same treatment did not change the surface characteristics of the high-SA biochar due partly to its well-developed porosity. The enhanced sorption of the pesticide isoproturon to the Al-oxide-treated low-SA biochar was observed and is positively related to the increased mesopore area. The desorption hysteresis of pesticide from the low-SA biochar was strengthened because of more pesticide molecules entrapped in the expanded pores by Al-oxide. However, no obvious change of pesticide sorption to the high-SA biochar after Al-oxide treatment was observed, corresponding to its unchanged porosity. The results suggest that the influence of Al-oxide on the biochars' sorption property is dependent on their porosity. This study will provide valuable information on the use of biochars for reducing the bioavailability of pesticides.

  4. Variation in the measurement of cranial volume and surface area using 3D laser scanning technology.

    Science.gov (United States)

    Sholts, Sabrina B; Wärmländer, Sebastian K T S; Flores, Louise M; Miller, Kevin W P; Walker, Phillip L

    2010-07-01

    Three-dimensional (3D) laser scanner models of human crania can be used for forensic facial reconstruction, and for obtaining craniometric data useful for estimating age, sex, and population affinity of unidentified human remains. However, the use of computer-generated measurements in a casework setting requires the measurement precision to be known. Here, we assess the repeatability and precision of cranial volume and surface area measurements using 3D laser scanner models created by different operators using different protocols for collecting and processing data. We report intraobserver measurement errors of 0.2% and interobserver errors of 2% of the total area and volume values, suggesting that observer-related errors do not pose major obstacles for sharing, combining, or comparing such measurements. Nevertheless, as no standardized procedure exists for area or volume measurements from 3D models, it is imperative to report the scanning and postscanning protocols employed when such measurements are conducted in a forensic setting.

  5. Measurement of surface emission flux rates for volatile organic compounds at Technical Area 54

    Energy Technology Data Exchange (ETDEWEB)

    Trujillo, V.; Morgenstern, M.; Krier, D. [Los Alamos National Lab., NM (United States); Gilkeson, R. [Weirich and Associates, Albuquerque, NM (United States)

    1998-06-01

    The survey described in this report was conducted to estimate the mass of volatile organic compounds venting to the atmosphere from active and inactive waste disposal sites at Technical Area 54. A large number of nonintrusive passive sample collection devices were placed on the ground surface for 72 hours to characterize an area of approximately 150 acres. Results provided an indication of the boundary location of the known volatile organic plume, plume constituents, and isolated high concentration areas. The data from this survey enhanced existing data from a limited number of monitor wells currently used for plume surveillance. Results indicate that the estimated mass emission to the atmosphere is orders of magnitude lower than what is considered a small flux rate at a spill site or a Resource Conservation and Recovery Act landfill and is far below the threshold limit established by the State of New Mexico as an air quality concern.

  6. Repetitive ERTS-1 observations of surface water variability along rivers and low-lying areas

    Science.gov (United States)

    Rango, A.; Salomonson, V. V.

    1973-01-01

    The Earth Resources Technology Satellite, ERTS-1, provides an 18 day repetitive coverage capability and observations in the 0.8-1.1 micron spectral region where the contrast between water and adjacent surfaces is relatively large. Using these capabilities, observations in Virginia, Iowa, Missouri, and California have been acquired showing distinct patterns of flooding. Repetitive views of these areas before and after flooding have been examined, and flood mapping was performed. Sloughs in California can be seen to expand in terms of the area covered by standing water as time extends from summer to autumn. The results indicate that ERTS-1 imagery can be a valuable adjunct to conventional and aircraft survey methods for ascertaining the amount of area covered by water or affected by flooding.

  7. Using bearing area parameters to quantify early erosive tooth surface changes in enamel: a pilot study.

    Science.gov (United States)

    Field, James; German, Matthew; Waterhouse, Paula

    2013-11-01

    Most in vitro studies investigate the erosive process using relatively simple roughness parameters such as roughness average (Ra). In isolation, Ra may misrepresent the surface features. Further, few studies report baseline surface characteristics after sample preparation. This study aimed to test the hypothesis that measuring the bearing area parameters in addition to Ra may be useful when qualifying the surface of enamel at baseline and after an erosive challenge. The null hypothesis for this study was that the bearing area parameters provide no more useful information than Ra alone, when qualifying the surface of enamel at baseline and after an erosive challenge. Enamel slabs (n=20) were prepared from human (n=2) and bovine (n=4) incisor teeth and polished with 0.05μm paste. Roughness average (Ra) and bearing parameters (MR1, MR2, Rpk, Rk, Rvk) were used to record baseline characteristics. Specimens were subjected to erosion with 1% citric acid solution for 1min. Profilometric characteristics were recorded post-erosion, along with the maximum height changes within the profile. T-tests were carried out in order to compare baseline surface characteristics between tissue types. Post-erosion, analysis of variance (ANOVA) was used to test the effects of tissue type (bovine or human). There was no significant difference in Ra between human and bovine incisor enamel at baseline (human 0.11μm, bovine 0.12μm P>0.05), and no significant difference was observed post-erosion (human 0.23μm, bovine 0.20μm P>0.05). There were significant differences in bearing parameters at baseline and post-erosion that were not identified by the Ra measurement alone. The results suggest that if Ra alone is measured, important differences in surface characteristics may be missed. The null hypothesis is rejected, and the recommendation is made that bearing parameters are included within profile measurements in order to further triangulate the results of surface analysis studies. In

  8. Digitized generalized areas where surface-water resources likely or potentially are susceptible to groundwater withdrawals in adjacent valleys, Great Basin National Park area, Nevada

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Polygons delineate generalized areas in and around Great Basin National Park where surface-water resources likely or potentially are susceptible to groundwater...

  9. The estimation of future surface water bodies at Olkiluoto area based on statistical terrain and land uplift models

    Energy Technology Data Exchange (ETDEWEB)

    Pohjola, J.; Turunen, J.; Lipping, T. [Tampere Univ. of Technology (Finland); Ikonen, A.

    2014-03-15

    In this working report the modelling effort of future landscape development and surface water body formation at the modelling area in the vicinity of the Olkiluoto Island is presented. Estimation of the features of future surface water bodies is based on probabilistic terrain and land uplift models presented in previous working reports. The estimation is done using a GIS-based toolbox called UNTAMO. The future surface water bodies are estimated in 10 000 years' time span with 1000 years' intervals for the safety assessment of disposal of spent nuclear fuel at the Olkiluoto site. In the report a brief overview on the techniques used for probabilistic terrain modelling, land uplift modelling and hydrological modelling are presented first. The latter part of the report describes the results of the modelling effort. The main features of the future landscape - the four lakes forming in the vicinity of the Olkiluoto Island - are identified and the probabilistic model of the shoreline displacement is presented. The area and volume of the four lakes is modelled in a probabilistic manner. All the simulations have been performed for three scenarios two of which are based on 10 realizations of the probabilistic digital terrain model (DTM) and 10 realizations of the probabilistic land uplift model. These two scenarios differ from each other by the eustatic curve used in the land uplift model. The third scenario employs 50 realizations of the probabilistic DTM while a deterministic land uplift model, derived solely from the current land uplift rate, is used. The results indicate that the two scenarios based on the probabilistic land uplift model behave in a similar manner while the third model overestimates past and future land uplift rates. The main features of the landscape are nevertheless similar also for the third scenario. Prediction results for the volumes of the future lakes indicate that a couple of highly probably lake formation scenarios can be identified

  10. Corrective Action Decision Document for Corrective Action Unit 417: Central Nevada Test Area Surface, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    U.S. Department of Energy Nevada Operations Office

    1999-04-02

    This Corrective Action Decision Document (CADD) identifies and rationalizes the U.S. Department of Energy, Nevada Operations Office's selection of a recommended corrective action alternative (CAA) appropriate to facilitate the closure of Corrective Action Unit (CAU) 417: Central Nevada Test Area Surface, Nevada, under the Federal Facility Agreement and Consent Order. Located in Hot Creek Valley in Nye County, Nevada, and consisting of three separate land withdrawal areas (UC-1, UC-3, and UC-4), CAU 417 is comprised of 34 corrective action sites (CASs) including 2 underground storage tanks, 5 septic systems, 8 shaker pad/cuttings disposal areas, 1 decontamination facility pit, 1 burn area, 1 scrap/trash dump, 1 outlier area, 8 housekeeping sites, and 16 mud pits. Four field events were conducted between September 1996 and June 1998 to complete a corrective action investigation indicating that the only contaminant of concern was total petroleum hydrocarbon (TPH) which was found in 18 of the CASs. A total of 1,028 samples were analyzed. During this investigation, a statistical approach was used to determine which depth intervals or layers inside individual mud pits and shaker pad areas were above the State action levels for the TPH. Other related field sampling activities (i.e., expedited site characterization methods, surface geophysical surveys, direct-push geophysical surveys, direct-push soil sampling, and rotosonic drilling located septic leachfields) were conducted in this four-phase investigation; however, no further contaminants of concern (COCs) were identified. During and after the investigation activities, several of the sites which had surface debris but no COCs were cleaned up as housekeeping sites, two septic tanks were closed in place, and two underground storage tanks were removed. The focus of this CADD was to identify CAAs which would promote the prevention or mitigation of human exposure to surface and subsurface soils with contaminant

  11. Interaction between surface water areas and groundwater in Hanoi city, Viet Nam

    Science.gov (United States)

    Hayashi, T.; Kuroda, K.; Do Thuan, A.; Tran Thi Viet, N.; Takizawa, S.

    2012-12-01

    Hanoi is the capital of Viet Nam and the second largest city in this country (population: 6.45 million in 2009). Hanoi city has developed along the Red River and has many lakes, ponds and canals. However, recent rapid urbanization of this city has reduced number of natural water areas such as ponds and lakes by reclamation not only in the central area but the suburban area. Canals also have been reclaimed or cut into pieces. Contrary, number of artificial water areas such as fish cultivation pond has rapidly increased. On the other hand, various kind of waste water flows into these natural and artificial water areas and induces pollution and eutrophication. These waste waters also have possibility of pollution of groundwater that is one of major water resources in this city. In addition, groundwater in this area has high concentrations of Arsenic, Fe and NH4. Thus, groundwater use may causes re-circulation of Arsenic. However, studies on the interaction between surface water areas and groundwater and on the role of surface water areas for solute transport with water cycle are a few. Therefore, we focused on these points and took water samples of river, pond and groundwater from four communities in suburban areas: two communities are located near the Red River and other two are far from the River. Also, columnar sediment samples of these ponds were taken and pore water was abstracted. Major dissolved ions, metals and stable isotopes of oxygen and hydrogen of water samples were analyzed. As for water cycle, from the correlation between δ18O and δD, the Red River water (after GNIR) were distributed along the LMWL (δD=8.2δ18O+14.1, calculated from precipitation (after GNIP)). On the other hand, although the pond waters in rainy season were distributed along the LMWL, that in dry season were distributed along the local evaporation line (LEL, slope=5.6). The LEL crossed with the LMWL at around the point of weighted mean values of precipitation in rainy season and of

  12. Stream Flooding Response and Water Quality as a Function of Increasing Impervious Surface Area

    Science.gov (United States)

    Hasenmueller, E. A.; Criss, R. E.; Winston, W. E.; Shaughnessy, A. R.

    2016-12-01

    Urban and suburban streams often exhibit frequent flash floods and low water quality, but surprisingly few studies of these systems attempt to resolve the relative contributions of different runoff fractions and their associated geochemistry. This study deliberately examined concurrent responses in three watersheds and two subbasins along a gradient of increasing impervious surface area in and around highly urbanized Saint Louis, Missouri, USA, to quantify changes in the relative contributions of pre-event (baseflow) and event (runoff) water to streamflow during flooding using hydrograph separations. Our high frequency monitoring of stable isotopes ratios (δ2H and δ18O) and water quality (temperature, dissolved O2, pH, turbidity, specific conductivity, concentrations of Cl- and nutrients, and bacterial loads) quantify large hydrologic and geochemical differences across the land use gradient. Following precipitation events, floods on a rural stream feature slow flow responses, hydrographs with low peak discharges and long lag times, high baseflow contributions, and small geochemical variations. In contrast, the flows of an urban stream and its tributary respond in a flashier manner, with peak flows that are nearly 10 times higher, average lag times that decrease by 85%, and event water contributions that are 2 times higher compared to the rural stream. The urban streams also exhibit large fluctuations in geochemistry, often with 5 times the variability of the rural end-member. These large geochemical changes in urban streams following storms are paralleled by more chaotic diurnal and seasonal variations. Importantly, we find that reduced baseflow as a function of increasing impervious surface area is not linear; thus, the hydrology of suburban streams is less impacted than would be predicted by impervious surface alone. This non-linear relationship with impervious surface area is also observed in some of the geochemical responses to flooding, and therefore

  13. Study on the photosynthetic performances of Enteromorpha prolifera collected from the surface and bottom of the sea of Qingdao sea area

    Institute of Scientific and Technical Information of China (English)

    LIN APeng; WANG Chao; QIAO HongJin; PAN GuangHua; WANG GuangCe; SONG LiYun; WANG ZhiYuan; SUN Song; ZHOU BaiCheng

    2009-01-01

    In this work, the photosynthetic performances of Enteromorpha prolifera thalli collected from the sur-face and bottom of the sea of Qingdao sea area were studied with chlorophyll fluorescence and oxy-graph technology. The samples with the highest photosynthetic activity among their kinds, the floating thalli from the sea surface of the south of the Qingdao Olympic Sailing Center and the sedimentary thaili from the mud surface of the bottom Tuandao bay, were chosen as representatives of surface thalli and bottom thallil respectively. The results showed that the maximal PSll quantum yield of the floating thalli was significantly lower than the normal level although their photosynthetic activities were relatively high; the photosynthetic potential of the thalli form the mud surface was extremely low. Thus, it is indicated that the floating thalli are seriously stressed by their environment and the thalli from the mud surface are already dead or are dying. On the other hand, the results of the laboratory cultivation showed that the sedimentary thalli cannot regain normal photosynthetic activity even under normal illumination condi-tions. Thus, the thalli from the mud surface cannot become reproductive source of the alga even if they can reach sea surface again. Therefore, a preliminary conclusion can be reached that, up to mid-July 2008, the environmental conditions of the Qingdao sea area are not suitable for the growth of the alga E. prolifera and for this reason the biomass of E. prolifera, in the area, could be declining.

  14. The surface area of the placenta and hypertension in the offspring in later life

    Science.gov (United States)

    BARKER, DAVID J.P.; THORNBURG, KENT L.; OSMOND, CLIVE; KAJANTIE, EERO; ERIKSSON, JOHAN G.

    2012-01-01

    Hypertension is more common among people who had low birthweight. Birthweight depends on the mother’s body size and on the growth of the placenta. We studied a group of 2003 subjects, of whom 644 were being treated for hypertension. They were born during 1934–44 in a hospital that kept detailed records of maternal and placental size. Hypertension was associated with reduced placental weight and surface area. These associations were strongest in the offspring of mothers with below average height or low socioeconomic status. In people whose mothers had below average height (160 cm) the prevalence of hypertension fell from 38% if the placental area was 200 cm2 or less to 21% if the area was more than 320 cm2 (p=0.0007). In the offspring of tall, middle class mothers, who were likely to have been the best nourished, hypertension was predicted by large placental weight in relation to birthweight. The odds ratio rose from 1.0 if the ratio of placental weight to birthweight was 0.17 or less to 1.9 (95% confidence interval 0.8 to 5.0) if the ratio was more than 0.21 (p for trend =0.03). We conclude that the effects of placental area on hypertension depend on the mother’s nutritional state. Poor maternal nutrition may compound the adverse effects of small placental size. In better-nourished mothers the placental surface may expand to compensate for fetal undernutrition. Growth along the minor axis of the surface may be more nutritionally sensitive than growth along the major axis. PMID:19876839

  15. Toward the Estimation of Surface Soil Moisture Content Using Geostationary Satellite Data over Sparsely Vegetated Area

    Directory of Open Access Journals (Sweden)

    Pei Leng

    2015-04-01

    Full Text Available Based on a novel bare surface soil moisture (SSM retrieval model developed from the synergistic use of the diurnal cycles of land surface temperature (LST and net surface shortwave radiation (NSSR (Leng et al. 2014. “Bare Surface Soil Moisture Retrieval from the Synergistic Use of Optical and Thermal Infrared Data”. International Journal of Remote Sensing 35: 988–1003., this paper mainly investigated the model’s capability to estimate SSM using geostationary satellite observations over vegetated area. Results from the simulated data primarily indicated that the previous bare SSM retrieval model is capable of estimating SSM in the low vegetation cover condition with fractional vegetation cover (FVC ranging from 0 to 0.3. In total, the simulated data from the Common Land Model (CoLM on 151 cloud-free days at three FLUXNET sites that with different climate patterns were used to describe SSM estimates with different underlying surfaces. The results showed a strong correlation between the estimated SSM and the simulated values, with a mean Root Mean Square Error (RMSE of 0.028 m3·m−3 and a coefficient of determination (R2 of 0.869. Moreover, diurnal cycles of LST and NSSR derived from the Meteosat Second Generation (MSG satellite data on 59 cloud-free days were utilized to estimate SSM in the REMEDHUS soil moisture network (Spain. In particular, determination of the model coefficients synchronously using satellite observations and SSM measurements was explored in detail in the cases where meteorological data were not available. A preliminary validation was implemented to verify the MSG pixel average SSM in the REMEDHUS area with the average SSM calculated from the site measurements. The results revealed a significant R2 of 0.595 and an RMSE of 0.021 m3·m−3.

  16. Evolution of the Specific Surface Area of Snow in a High Temperature Gradient Metamorphism

    Science.gov (United States)

    Wang, X.; Baker, I.

    2014-12-01

    The structural evolution of low-density snow under a high temperature gradient over a short period usually takes place in the surface layers during diurnal recrystallization or on a clear, cold night. To relate snow microstructures with their thermal properties, we combined X-ray computed microtomography (micro-CT) observations with numerical simulations. Different types of snow were tested over a large range of TGs (100 K m-1- 500 K m-1). The Specific Surface Area (SSA) was used to characterize the temperature gradient metamorphism (TGM). The magnitude of the temperature gradient and the initial snow type both influence the evolution of SSA. The SSA evolution under TGM was dominated by grain growth and the formation of complex surfaces. Fresh snow experienced a logarithmic decrease of SSA with time, a feature been observed previously by others [Calonne et al., 2014; Schneebeli and Sokratov, 2004; Taillandier et al., 2007]. However, for initial rounded and connected snow structures, the SSA will increase during TGM. Understanding the SSA increase is important in order to predict the enhanced uptake of chemical species by snow or increase in snow albedo. Calonne, N., F. Flin, C. Geindreau, B. Lesaffre, and S. Rolland du Roscoat (2014), Study of a temperature gradient metamorphism of snow from 3-D images: time evolution of microstructures, physical properties and their associated anisotropy, The Cryosphere Discussions, 8, 1407-1451, doi:10.5194/tcd-8-1407-2014. Schneebeli, M., and S. A. Sokratov (2004), Tomography of temperature gradient metamorphism of snow and associated changes in heat conductivity, Hydrological Processes, 18(18), 3655-3665, doi:10.1002/hyp.5800. Taillandier, A. S., F. Domine, W. R. Simpson, M. Sturm, and T. A. Douglas (2007), Rate of decrease of the specific surface area of dry snow: Isothermal and temperature gradient conditions, Journal of Geophysical Research: Earth Surface (2003-2012), 112(F3), doi: 10.1029/2006JF000514.

  17. The role of cold work and applied stress on surface oxidation of 304 stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Lozano-Perez, Sergio, E-mail: sergio.lozano-perez@materials.ox.ac.uk [Department of Materials, University of Oxford, Parks Rd., Oxford OX1 3PH (United Kingdom); Kruska, Karen [Department of Materials, University of Oxford, Parks Rd., Oxford OX1 3PH (United Kingdom); Iyengar, Ilya [Winchester College, College Street, Winchester SO23 9LX (United Kingdom); Terachi, Takumi; Yamada, Takuyo [Institute of Nuclear Safety System (INSS), 64 Sata, Mihama-cho, Mikata-gun, Fukui 919-1205 (Japan)

    2012-03-15

    Highlights: Black-Right-Pointing-Pointer FIB 3D sequential sectioning is an ideal technique to characterize surface oxidation. Black-Right-Pointing-Pointer 3D models of the oxide can be produced with nanometre resolution. Black-Right-Pointing-Pointer The effects of stress and cold work in grain boundary oxidation have been analysed. Black-Right-Pointing-Pointer At least three different oxidation modes are observed when stress is applied. - Abstract: FIB 3-dimensional (3D) sequential sectioning has been used to characterize environmental degradation of 304 stainless steels in pressurized water reactor (PWR) simulated primary water. In particular, the effects of cold work and applied stress on oxidation have been studied in detail. It was found that a description of the oxidation behaviour of this alloy is only complete if it is treated statistically, since it can suffer from high variability depending on the feature described.

  18. Task-based lead exposures and work site characteristics of bridge surface preparation and painting contractors.

    Science.gov (United States)

    Virji, M Abbas; Woskie, Susan R; Pepper, Lewis D

    2009-02-01

    This study of bridge painters working for small contractors in Massachusetts investigated the causes of elevated blood lead levels and assessed their exposure to lead. Bridge work sites were evaluated for a 2-week period during which personal and area air samples and information on work site characteristics and lead abatement methods were gathered. Short-duration personal inhalable samples collected from 18 tasks had geometric means (GM) of 3 microg/m(3) to 7286 microg/m(3). Full-shift, time-weighted average (TWA) inhalable samples (>or=6 hours) collected from selected workers and work sites had GMs of 2 microg/m(3) to 15,704 microg/m(3); 80% of samples exceeded the permissible exposure limit (PEL) of 50 microg/m(3), on average by a factor of 30. Area inhalable samples collected from three locations ranged from 2 microg/m(3) to 40,866 microg/m(3) from inside the containment, 2 microg/m(3) to 471 microug/m(3) from a distance of 6 meters from the containment. Seventy nine percent of the area samples from inside the containment exceeded the PEL on average by a factor of 140. Through observations of work site characteristics, opportunities for improving work methods were identified, particularly the institution of engineering controls (which were only occasionally present) and improvement in the design and construction of the containment structure. The high levels of airborne lead exposures indicate a potential for serious exposure hazard for workers and environmental contamination, which can be mitigated through administrative and engineering controls. Although these data were collected over 10 years ago, a 2005 regulatory review by the Occupational Safety and Health Administration (OSHA) of its lead in construction standard reported that elevated lead exposures and blood lead levels, high occurrence of noncompliance with the lead standard, and nonimplementation of newer technology especially among small painting firms employing <10 workers are still widespread. As a

  19. Automated detection method for architectural distortion areas on mammograms based on morphological processing and surface analysis

    Science.gov (United States)

    Ichikawa, Tetsuko; Matsubara, Tomoko; Hara, Takeshi; Fujita, Hiroshi; Endo, Tokiko; Iwase, Takuji

    2004-05-01

    As well as mass and microcalcification, architectural distortion is a very important finding for the early detection of breast cancer via mammograms, and such distortions can be classified into three typical types: spiculation, retraction, and distortion. The purpose of this work is to develop an automatic method for detecting areas of architectural distortion with spiculation. The suspect areas are detected by concentration indexes of line-structures extracted by using mean curvature. After that, discrimination analysis of nine features is employed for the classifications of true and false positives. The employed features are the size, the mean pixel value, the mean concentration index, the mean isotropic index, the contrast, and four other features based on the power spectrum. As a result of this work, the accuracy of the classification was 76% and the sensitivity was 80% with 0.9 false positives per image in our database in regard to spiculation. It was concluded that our method was effective in detectiong the area of architectural distortion; however, some architectural distortions were not detected accurately because of the size, the density, or the different appearance of the distorted areas.

  20. Guidance manual on the estimation of airborne asbestos concentrations as a function of distance from a contaminated surface area for area suspension evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Stenner, R.D.; Droppo, J.G.; Peloquin, R.A.; Bienert, R.W.; VanHouten, N.C.

    1990-04-01

    This Guidance Manual provides a quantitative approach for estimating the airborne concentrations of asbestos from disturbed soils and surfaces. Asbestos-containing surfaces may include roads surfaced with asbestos-bearing serpentine rock, tailings piles, and landfills. This manual identifies the procedures necessary for estimating airborne concentrations of asbestos in disturbed soils. The manual is to be used in conjunction with the Airborne Asbestos Concentration Estimator System-Area Suspension (AACES-AS) computer code. 44 refs., 16 figs., 7 tabs.

  1. Specific Features of Chip Making and Work-piece Surface Layer Formation in Machining Thermal Coatings

    Directory of Open Access Journals (Sweden)

    V. M. Yaroslavtsev

    2016-01-01

    of chip element formation are cycled. Fluctuations of the cutting force components completely repeat all the stages of local destruction and formation of individual chip elements. Studies have shown that with increased thickness of the cut-off layer the main crack develops below the cut-off line thus significantly affecting the quality of the machined surface: emerging cracks, cavities, chips, and other defects that significantly reduce the product performance.In machining the plasma-sprayed coatings, their high tendency to strengthening and rehardening because of the cutting action has a great impact on the surface quality. This is evident as a loss of the elastic equilibrium state stability and as a destruction of the work-piece surface layer (chipping, peeling, flaking. With increasing curvature of the machined surface (e.g., decreasing radius of cylindrical billet the surface layer is increasingly prone to destruction.Specific problems are cutting fluids used in grinding the plasma-sprayed coatings. Machining in this case comes with saturated liquid vapours formed in the surface layer of a billet under high pressure. With a pressure drop on the tool-side in cutting there is such an intensity of vaporization that micro- and macro-fractures of the machined work-piece surface can be initiated.

  2. Visualization of Lake Mead Surface Area Changes from 1972 to 2009

    Directory of Open Access Journals (Sweden)

    David M. Atkinson

    2012-06-01

    Full Text Available For most of the last decade, the south-western portion of the United States has experienced a severe and enduring drought. This has caused serious concerns about water supply and management in the region. In this research, 30 orthorectified Landsat satellite images from the United States Geological Service (USGS Earth Explorer archive were analyzed for the 1972 to 2009 period. The images encompassed Lake Mead (a major reservoir in this region and were examined for changes in water surface area. Decadal lake area minimums/maximums were achieved in 1972/1979, 1981/1988, 1991/1998, and 2009/2000. The minimum lake area extent occurred in 2009 (356.4 km2, while the maximum occurred in 1998 (590.6 km2. Variable trends in water level and lake area were observed throughout the analysis period, however progressively lower values were observed since 2000. The Landsat derived lake areas show a very strong relationship with actual measured water levels at the Hoover Dam. Yearly water level variations at the dam vary minimally from the satellite derived estimates. A complete (yearly record of satellite images may have helped to reduce the slight deviations in the time series.

  3. Correlation of H/sup -/ production and the work function of a surface in a hydrogen plasma

    Energy Technology Data Exchange (ETDEWEB)

    Wada, M.

    1983-03-01

    Surface-plasma negative hydrogen ion sources are being developed as possible parts for future neutral beam systems. In these ion sources, negative hydrogen ions (H/sup -/) are produced at low work function metal surfaces immersed in hydrogen plasmas. To investigate the correlation between the work function and the H/sup -/ production at the surface with a condition similar to the one in the actual plasma ion source, these two parameters were simultaneously measured in the hydrogen plasma environment.

  4. Characterization of Bimetallic Castings with an Austenitic Working Surface Layer and an Unalloyed Cast Steel Base

    Science.gov (United States)

    Wróbel, Tomasz

    2014-05-01

    The paper presents the technology of bimetallic castings based on the founding method of layer coating directly in the cast process of the so-called method of mold cavity preparation. The prepared castings consist of two fundamental parts, i.e., the base and the working surface layer. The base part of the bimetallic casting is typical foundry material, i.e., unalloyed cast steel, whereas the working layer is a plate of austenitic alloy steel sort X2CrNi 18-9. The quality of the joint between the base part and the working layer was evaluated on the basis of ultrasonic non-destructive testing and structure examinations containing metallographic macro- and microscopic studies with the use of a light microscope (LOM) with microhardness measurements and a scanning electron microscope (SEM) with microanalysis of the chemical composition (energy dispersive spectroscopy—EDS). On the basis of the obtained results it was confirmed that the decisive phenomena needed to create a permanent joint between the two components of the bimetallic casting are carbon and heat transport in the direction from the high-carbon and hot base material which was poured into the mold in the form of liquid metal to the low-carbon and cold material of the working layer which was placed in the mold cavity in the form of a monolithic insert.

  5. Assessment of mercury erosion by surface water in Wanshan mercury mining area.

    Science.gov (United States)

    Dai, ZhiHui; Feng, Xinbin; Zhang, Chao; Shang, Lihai; Qiu, Guangle

    2013-08-01

    Soil erosion is a main cause of land degradation, and in its accelerated form is also one of the most serious ecological environmental problems. Moreover, there are few studies on migration of mercury (Hg) induced by soil erosion in seriously Hg-polluted districts. This paper selected Wanshan Hg mining area, SW China as the study area. Revised universal soil loss equation (RUSLE) and Geographic information system (GIS) methods were applied to calculate soil and Hg erosion and to classify soil erosion intensity. Our results show that the soil erosion rate can reach up to 600,884tkm(-2)yr(-1). Surfaces associated with very slight and extremely severe erosion include 76.6% of the entire land in Wanshan. Furthermore, the cumulative erosion rates in the area impacted by extremely severe erosion make up 90.5% of the total. On an annual basis, Hg surface erosion load was predicted to be 505kgyr(-1) and the corresponding mean migration flux of Hg was estimated to be 3.02kgkm(-2)yr(-1). The erosion loads of Hg resulting from farmland and meadow soil were 175 and 319kgyr(-1) respectively, which were enhanced compared to other landscape types due to the fact that they are generally located in the steep zones associated with significant reclamation. Contributing to establish a mass balance of Hg in Wanshan Hg mining area, this study supplies a dependable scientific basis for controlling soil and water erosion in the local ecosystems. Land use change is the most effective way for reducing Hg erosion load in Wanshan mining area. Copyright © 2013 Elsevier Inc. All rights reserved.

  6. Pollutant loads of surface runoff in Wuhan City Zoo, an urban tourist area

    Institute of Scientific and Technical Information of China (English)

    ZHAO Jian-wei; SHAN Bao-qing; YIN Cheng-qing

    2007-01-01

    The pollutant loads of surface runoff in an urban tourist area have been investigated for two years in the Wuhan City Zoo, China. Eight sampling sites, including two woodlands, three animal yards, two roofs and one road, were selected for sampling and study. The results indicate that pollutants ranked in a predictable order of decreasing load (e.g. animal yard>roof>woodland>road), with animal yards acting as the key pollution source in the zoo. Pollutants were transported mainly by particulate form in runoff. Particulate nitrogen (PN) and particulate phosphorous (PP) accounted on average for 61%, 78% of total pollutant, respectively, over 13 monitored rainfall events. These results indicate the treatment practices should be implemented to improve particulate nutrient removal. Analysis of the M(V) curve indicated that no first flush effect existed in the surface runoff from pervious areas (e.g. woodland, animal ground yard), whereas a first flush effect was evident in runoff from impervious surfaces (e.g. animal cement yard, roof, road).

  7. Influence of Alkali Treatment on the Surface Area of Aluminium Dross

    Directory of Open Access Journals (Sweden)

    N. S. Ahmad Zauzi

    2016-01-01

    Full Text Available Aluminium dross is an industrial waste from aluminium refining industry and classified as toxic substances. However, the disposal of dross as a waste is a burden to aluminium manufacturer industries due to its negative effects to the ecosystem, surface, and ground water. Therefore the purpose of this study is to evaluate the influence of sodium hydroxide (NaOH on the surface area and pore size of aluminium dross. There were 3 stages in the treatment activities, which were leaching, precipitation, and calcination process. The optimum result from this study was the surface area of aluminium dross increases from 10.1 m2/g up to 80.0 m2/g at 40°C, 1% NaOH, and 15-minute reaction time. Thus, aluminium dross has a potential to be converted into other useful material such as catalyst and absorbent. The benefit of this research is that the hazardous industrial waste can be turned into wealth to be used in other applications such as in catalytic activities and absorber in waste water treatment. Further investigation on the physicochemical of aluminium dross with different acid or alkali should be conducted to get deeper understanding on the aluminium dross as a catalyst-type material.

  8. Preparation and Characterization of High Surface Area Activated Carbon Fibers from Lignin

    Directory of Open Access Journals (Sweden)

    Jian Lin

    2016-10-01

    Full Text Available Activated carbon fibers (ACFs were successfully prepared from softwood lignin, which was isolated with polyethylene glycol 400 (PEG-400 as a solvolysis reagent, by water steam activation. The pore characterization and adsorption property of ACFs were investigated. The results showed that all the ACFs with more micropores exhibited high specific surface area and total pore volume which increased with the activation time prolonging; the highest ones were around 3100 m2/g and 1.5 mL/g, respectively. The specific surface area and total pore volume were much larger than those of other types of lignin-based ACFs and activated charcoal. Besides, with increasing activation time, the amount of graphitic carbon, which was the main compound on the surface of ACFs, decreased, while the amount of functional groups containing C–O slightly increased. In addition, the adsorption capacity of ACFs for methylene blue was highly increased as the activation time increased. Accordingly, lignin isolated with PEG is a promising precursor for ACF production.

  9. Perspectives of social work in the area of intervention and elimination of domestic violence against children

    OpenAIRE

    Haburajová Ilavská, Lenka

    2014-01-01

    In this article we describe some stages of social work, and we specify them in regard to children experiencing domestic violence. Consequently we present research results, which was concentrated to determine specific operating processes and methods of social work with children experiencing domestic violence.

  10. 33 CFR 334.1180 - Strait of Juan de Fuca, Wash.; air-to-surface weapon range, restricted area.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Strait of Juan de Fuca, Wash.; air-to-surface weapon range, restricted area. 334.1180 Section 334.1180 Navigation and Navigable... REGULATIONS § 334.1180 Strait of Juan de Fuca, Wash.; air-to-surface weapon range, restricted area. (a) The...

  11. Where Does the Formula Come from? Students Investigating Total Surface Areas of a Pyramid and Cone Using Models and Technology

    Science.gov (United States)

    Obara, Samuel

    2009-01-01

    Spatial reasoning is a skill that needs to be developed in students as it is important in geometry for determining total surface areas and volumes of 3-dimensional shapes (Liedtke, 1995). Simply teaching children the formulae, in this case for finding total surface areas, can limit them in understanding mathematics conceptually (Bonotto, 2003).…

  12. Estimating Surface Area of Sponges and Marine Gorgonians as Indicators of Habitat Availability on Caribbean Coral Reefs

    Science.gov (United States)

    Surface area and topographical complexity are fundamental attributes of shallow tropical coral reefs and can be used to estimate habitat for fish and invertebrates. This study presents empirical methods for estimating surface area provided by sponges and gorgonians in the Central...

  13. Estimating Surface Area of Sponges and Marine Gorgonians as Indicators of Habitat Availability on Caribbean Coral Reefs

    Science.gov (United States)

    Surface area and topographical complexity are fundamental attributes of shallow tropical coral reefs and can be used to estimate habitat for fish and invertebrates. This study presents empirical methods for estimating surface area provided by sponges and gorgonians in the Central...

  14. Fabrication of a Horizontal and a Vertical Large Surface Area Nanogap Electrochemical Sensor

    Directory of Open Access Journals (Sweden)

    Jules L. Hammond

    2016-12-01

    Full Text Available Nanogap sensors have a wide range of applications as they can provide accurate direct detection of biomolecules through impedimetric or amperometric signals. Signal response from nanogap sensors is dependent on both the electrode spacing and surface area. However, creating large surface area nanogap sensors presents several challenges during fabrication. We show two different approaches to achieve both horizontal and vertical coplanar nanogap geometries. In the first method we use electron-beam lithography (EBL to pattern an 11 mm long serpentine nanogap (215 nm between two electrodes. For the second method we use inductively-coupled plasma (ICP reactive ion etching (RIE to create a channel in a silicon substrate, optically pattern a buried 1.0 mm × 1.5 mm electrode before anodically bonding a second identical electrode, patterned on glass, directly above. The devices have a wide range of applicability in different sensing techniques with the large area nanogaps presenting advantages over other devices of the same family. As a case study we explore the detection of peptide nucleic acid (PNA−DNA binding events using dielectric spectroscopy with the horizontal coplanar device.

  15. Fabrication of a Horizontal and a Vertical Large Surface Area Nanogap Electrochemical Sensor.

    Science.gov (United States)

    Hammond, Jules L; Rosamond, Mark C; Sivaraya, Siva; Marken, Frank; Estrela, Pedro

    2016-12-14

    Nanogap sensors have a wide range of applications as they can provide accurate direct detection of biomolecules through impedimetric or amperometric signals. Signal response from nanogap sensors is dependent on both the electrode spacing and surface area. However, creating large surface area nanogap sensors presents several challenges during fabrication. We show two different approaches to achieve both horizontal and vertical coplanar nanogap geometries. In the first method we use electron-beam lithography (EBL) to pattern an 11 mm long serpentine nanogap (215 nm) between two electrodes. For the second method we use inductively-coupled plasma (ICP) reactive ion etching (RIE) to create a channel in a silicon substrate, optically pattern a buried 1.0 mm × 1.5 mm electrode before anodically bonding a second identical electrode, patterned on glass, directly above. The devices have a wide range of applicability in different sensing techniques with the large area nanogaps presenting advantages over other devices of the same family. As a case study we explore the detection of peptide nucleic acid (PNA)-DNA binding events using dielectric spectroscopy with the horizontal coplanar device.

  16. Monitoring of the Earth's surface deformation in the area of water dam Zarnowiec

    Science.gov (United States)

    Mojzes, Marcel; Wozniak, Marek; Habel, Branislav; Macak, Marek

    2017-04-01

    Mathematical and physical research directly motivates geodetic community which can provide very accurate measurements for testing of the proposed models Earth's surface motion near the water dams should be monitored due to the security of the area. This is a process which includes testing of existing models and their physical parameters. Change of the models can improve the practical results for analyzing the trends of motion in the area of upper reservoir of water dam Zarnowiec. Since 1998 Warsaw University of Technology realized a research focused on the horizontal displacements of the upper reservoir of water dam Zarnowiec. The 15 selected control points located on the upper reservoir crown of the water dam were monitored by classical distance measurements. It was found out that changes in the object's geometry occur due to the variation of the water level. The control measurements of the changes in the object's geometry occurring during the process of emptying and filling of the upper reservoir of water dam were compared with the deformations computed using improved Boussinesqués method programmed in the software MATLAB and ANSYS for elastic and isotropic half space as derivation of suitable potentials extended to the loaded region. The details and numerical results of this process are presented This presentation was prepared within the project "National Centre for Diagnostic of the Earth's Surface Deformations in the Area of Slovakia", ITMS code: 26220220108.

  17. Characteristics of PAHs adsorbed on street dust and the correlation with specific surface area and TOC.

    Science.gov (United States)

    Wang, Chengkun; Li, Yingxia; Liu, Jingling; Xiang, Li; Shi, Jianghong; Yang, Zhifeng

    2010-10-01

    Street dust was collected from five roads with different traffic volumes in the metropolitan area of Beijing and separated into five size fractions. Concentrations of polycyclic aromatic hydrocarbons (PAHs) adsorbed on street dust in different size ranges and their correlation with specific surface area and total organic carbon (TOC) were investigated. Results show that the concentration of 16-PAHs of sieved samples ranges from 0.27 to 1.30 mg/kg for all the sampling sites. Particles smaller than 40 mum in diameter have the highest 16-PAHs concentration among all of the size ranges for street dust from the four sampling sites with vehicles running on. PAHs with three or four rings account for 68% of the overall 16-PAHs on average. Remarkable positive correlation exists between 16-PAHs concentration and specific surface area with R(2) values from 0.7 to 0.96 for the four sampling sites with vehicles running on. The relationship between the concentration of 16-PAHs and TOC is less clear.

  18. Work in progress: Robotics mapping of landmine and UXO contaminated areas

    DEFF Research Database (Denmark)

    Jensen, Kjeld; Jørgensen, Rasmus Nyholm; Bøgild, Anders

    the knowledge and experience from the agricultural plant nursing robotics domain to demining applications. The aim is to have a reliable, efficient and user-friendly autonomous robot capable of mapping as well as visually marking detected landmines and UXO within a bounded area. The operator specifies the area...... platform design with ample room for a mine detection im- plement is almost finished and will form the base for further experiments. The area coverage algorithm is being improved to handle static and dynamical obstacles as well as slopes. Detection of obstacles will be performed using a 3D laser range scan...

  19. Synthesis of zinc aluminate with high surface area by microwave hydrothermal method applied in the transesterification of soybean oil (biodiesel)

    Energy Technology Data Exchange (ETDEWEB)

    Quirino, M.R. [Chemistry Laboratory of Federal University of Paraiba (LABQUIM), Campus III, 58200-000 Bananeiras, PB (Brazil); Oliveira, M.J.C. [Academic Unit of Materials Engineering, UFCG, Campina Grande Campus I, 58429-900 Campina Grande, PB (Brazil); Keyson, D. [Laboratory of study in Science, DME, Federal University of Paraíba, Campus I, 58051-900 João Pessoa, PB (Brazil); Lucena, G.L., E-mail: guilherme_leo1@yahoo.com.br [Chemistry Laboratory of Federal University of Paraiba (LABQUIM), Campus III, 58200-000 Bananeiras, PB (Brazil); Oliveira, J.B.L. [Federal University of Rio Grande do Norte, UFRN, Campus I, 59078-970 Natal, RN (Brazil); Gama, L. [Academic Unit of Materials Engineering, UFCG, Campina Grande Campus I, 58429-900 Campina Grande, PB (Brazil)

    2016-02-15

    Highlights: • ZnAl{sub 2}O{sub 4} spinel was synthesized by the microwave hydrothermal method in only 15 or 30 min. • The powders show high specific surface area. • ZAT{sub b}15 showed activity of 52.22% for the conversion of soybean oil into biodiesel. - Abstract: Zinc aluminate is a material with high thermal stability and high mechanical strength that, owing to these properties, is used as a catalyst or support. In this work, zinc aluminate spinel was synthesized by the microwave hydrothermal method in only 15 or 30 min at a low temperature (150 °C) without templates, using only Al(NO{sub 3}){sub 3}·9H{sub 2}O, Zn(NO{sub 3}){sub 2}·6H{sub 2}O, and urea as precursors and applied in the transesterification of soybean oil. X-ray diffraction analysis showed that ZnAl{sub 2}O{sub 4} had a cubic structure without secondary phases. The nitrogen adsorption measurements (BET) revealed a high surface area (266.57 m{sup 2} g{sup −1}) for the nanopowder synthesized in 15 min. This powder showed activity of 52.22% for the catalytic conversion of soybean oil into biodiesel by transesterification.

  20. A high surface area Zr(IV)-based metal-organic framework showing stepwise gas adsorption and selective dye uptake

    Science.gov (United States)

    Lv, Xiu-Liang; Tong, Minman; Huang, Hongliang; Wang, Bin; Gan, Lei; Yang, Qingyuan; Zhong, Chongli; Li, Jian-Rong

    2015-03-01

    Exploitation of new metal-organic framework (MOF) materials with high surface areas has been attracting great attention in related research communities due to their broad potential applications. In this work, a new Zr(IV)-based MOF, [Zr6O4(OH)4(eddb)6] (BUT-30, H2eddb=4,4‧-(ethyne-1,2-diyl)dibenzoic acid) has been solvothermally synthesized, characterized, and explored for gases and dyes adsorptions. Single-crystal X-ray diffraction analysis demonstrates a three-dimensional cubic framework structure of this MOF, in which each Zr6O4(OH)4 building unit is linked by 12 linear eddb ligands. BUT-30 has been found stable up to 400 °C and has a Brunauer-Emmett-Teller (BET) surface area as high as 3940.6 m2 g-1 (based on the N2 adsorption at 77 K) and total pore volume of 1.55 cm3 g-1. It is more interesting that this MOF exhibits stepwise adsorption behaviors for Ar, N2, and CO2 at low temperatures, and selective uptakes towards different ionic dyes.

  1. Physical countermeasures to sustain acceptable living and working conditions in radioactively contaminated residential areas

    DEFF Research Database (Denmark)

    Andersson, Kasper Grann; Roed, Jørn; Eged, K.;

    2003-01-01

    The Chernobyl accident highlighted the need in nuclear preparedness for robust, effective and sustainable countermeasure strategies for restoration of radioactively contaminated residential areas. Under the EC-supported STRATEGY project a series ofinvestigations were made of countermeasures...... of wastes generated by countermeasures had to be described separately to provide room for the required level of detail. The information is mainly intended as atool for decision makers and planners and constitutes a basis for the STRATEGY decision framework for remediation of contaminated urban areas....

  2. Tungsten carbide modified high surface area carbon as fuel cell catalyst support

    Science.gov (United States)

    Shao, Minhua; Merzougui, Belabbes; Shoemaker, Krista; Stolar, Laura; Protsailo, Lesia; Mellinger, Zachary J.; Hsu, Irene J.; Chen, Jingguang G.

    Phase pure WC nanoparticles were synthesized on high surface area carbon black (800 m 2 g -1) by a temperature programmed reaction (TPR) method. The particle size of WC can be controlled under 30 nm with a relatively high coverage on the carbon surface. The electrochemical testing results demonstrated that the corrosion resistance of carbon black was improved by 2-fold with a surface modification by phase pure WC particles. However, the WC itself showed some dissolution under potential cycling. Based on the X-ray diffraction (XRD) and inductively coupled plasma (ICP) analysis, most of the WC on the surface was lost or transformed to oxides after 5000 potential cycles in the potential range of 0.65-1.2 V. The Pt catalyst supported on WC/C showed a slightly better ORR activity than that of Pt/C, with the Pt activity loss rate for Pt/WC/C being slightly slower compared to that of Pt/C. The performance and decay rate of Pt/WC/C were also evaluated in a fuel cell.

  3. Parasitic contamination of surface and deep soil in different areas of Sari in north of Iran

    Directory of Open Access Journals (Sweden)

    Hajar Ziaei Hezarjaribi

    2016-10-01

    Full Text Available Objective: To study the parasitic contamination of soil in selected areas of Sari, north of Iran. Methods: A cross-sectional study was conducted to identify all available parasites in surface and deep soil. In this study 580 soil samples (278 deep soil and 302 topsoil samples from 21 different locations were collected from pathways, parks, greenhouses, estates around the city, cemetery, main squares, farmlands, fenced gardens and seashores. Depending on the soil type, two samples were prepared, from surface and deep soil at the depth of 3 to 5 cm. After performing various stages of preparation, including cleaning and washing, smoothing and flotation, parasitic elements were examined microscopically and quantitative parasite counting was done using a McMaster slide. Results: The results showed that the highest rate of parasitic contamination was related to nematodes larvae (26.11%. Other contaminants such as Entamoeba and Acanthamoeba cysts, vacuolization Blastocystis hominis form, oocyte containing sporocysts, Toxascaris eggs, nematoda larvae, Hymenolepis eggs, Ascaris eggs, Fasciola eggs, hookworm eggs, Toxocara eggs, insects' larvae and other ciliated and flagellated organisms were also observed. The results of this study showed that the highest contamination was found in public garden (25.80% both in surface (29.30% and in deep soil (21.12%, while the lowest level of contamination was observed in seashore surface soil (4.90%. Conclusions: The results showed that soil can provide a potential medium for the spread of soil transmitted parasitic diseases in the environment; therefore, preventive programs are needed.

  4. Hydrophobic high surface area zeolites derived from fly ash for oil spill remediation.

    Science.gov (United States)

    Sakthivel, Tamilselvan; Reid, David L; Goldstein, Ian; Hench, Larry; Seal, Sudipta

    2013-06-01

    Fly ash, a coal combustion byproduct with a predominantly aluminosilicate composition, is modified to develop an inexpensive sorbent for oil spill remediation. The as-produced fly ash is a hydrophilic material with poor sorption capacity. A simple two-step chemical modification process is designed to improve the oil sorption capacity. First, the fly ash was transformed to a zeolitic material via an alkali treatment, which increased the specific surface area up to 404 m(2) g(-1). Then, the material was surface functionalized to form a hydrophobic material with high contact angle up to 147° that floats on the surface of an oil-water mixture. The reported oil sorption capacities of X-type zeolite sorbent with different surface functionalization (propyl-, octyl-, octadecyl-trimethoxysilane and esterification) were estimated to 1.10, 1.02, 0.86, and 1.15 g g(-1), respectively. Oil sorption was about five times higher than the as-received fly ash (0.19 g g(-1)) and also had high buoyancy critical for economic cleanup of oil over water.

  5. Luminosity and surface brightness distribution of K-band galaxies from the UKIDSS Large Area Survey

    CERN Document Server

    Smith, Anthony J; Cross, Nicholas J G

    2008-01-01

    We present luminosity and surface brightness distributions of 36,663 galaxies with K-band photometry from the UKIRT Infrared Deep Sky Survey (UKIDSS) Large Area Survey (LAS), Data Release 3 and optical photometry from Data Release 5 of the Sloan Digital Sky Survey (SDSS). Various features and limitations of the new UKIDSS data are examined, such as a problem affecting Petrosian magnitudes of extended sources. Selection limits in K- and r-band magnitude, K-band surface brightness and K-band radius are included explicitly in the 1/Vmax estimation of the space density and luminosity function. The bivariate brightness distribution in K-band absolute magnitude and surface brightness is presented and found to display a clear luminosity-surface brightness correlation that flattens at high luminosity and broadens at low luminosity, consistent with similar analyses at optical wavelengths. Best fitting Schechter function parameters for the K-band luminosity function are found to be M*-5log h=-23.17 +/- 0.04, alpha=-0.8...

  6. Changes in porosity, permeability and surface area during rock dissolution: effects of mineralogical heterogeneity

    CERN Document Server

    Min, Ting; Chen, Li; Kang, Qinjun; Tao, Wen-Quan

    2015-01-01

    Effects of heterogeneity of mineral distribution and reaction rate on the rock dissolution process are investigated using a pore-scale reactive transport model based on the lattice Boltzmann method. Coupled fluid flow, species transport, chemical reaction and solid structure alternation due to dissolution are simulated. Effects of mineral distributions and chemical heterogeneity on the dissolution behaviors and evolutions of hydrologic properties are studied under different reactive transport conditions. Simulation results show that the coupling between advection, diffusion and reaction as well as the mineralogical heterogeneity leads to complex reactive transport behaviors and complicated temporal evolutions of hydrologic properties including porosity, permeability and reactive surface. Diverse relationships between surface area and volume are predicted, which cannot be described by simple models such as the spherical-grain model. Porosity-permeability relationships also differ under different mineral distri...

  7. High surface area graphite as alternative support for proton exchange membrane fuel cell catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira-Aparicio, P.; Folgado, M.A. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas (CIEMAT), Avda. Complutense 22, E-28040 Madrid (Spain); Daza, L. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas (CIEMAT), Avda. Complutense 22, E-28040 Madrid (Spain); Instituto de Catalisis y Petroleoquimica (CSIC), C/Marie Curie, 2 Campus de Cantoblanco, E-28049 Madrid (Spain)

    2009-07-01

    The suitability of a high surface area graphite (HSAG) as proton exchange membrane fuel cell (PEMFC) catalyst support has been evaluated and compared with that of the most popular carbon black: the Vulcan XC72. It has been observed that Pt is arranged on the graphite surface resulting in different structures which depend on the catalysts synthesis conditions. The influence that the metal particle size and the metal-support interaction exert on the catalysts degradation rate is analyzed. Temperature programmed oxidation (TPO) under oxygen containing streams has been shown to be a useful method to assess the resistance of PEMFC catalysts to carbon corrosion. The synthesized Pt/HSAG catalysts have been evaluated in single cell tests in the cathode catalytic layer. The obtained results show that HSAG can be a promising alternative to the traditionally used Vulcan XC72 carbon black when suitable catalysts synthesis conditions are used. (author)

  8. On the extension of the sensitive area of an extensive air shower surface array

    CERN Document Server

    Kh, H Hedayati

    2016-01-01

    A large distance between true and reconstructed core locations of an extensive air shower (EAS) may results in great systematic mis-estimation of EAS parameters. The reconstruction of those EASs whose core locations are outside the boundary of a surface array (outside EAS (OEAS)) results in a large distance of the reconstructed core location from the true one, especially when the true core is far outside the array. Although it may not be mentioned, the identification of OEASs is a necessary and important step in the reconstruction procedure of an EAS. In this paper, an existing technique is optimized for the identification of OEASs. The simultaneous use of this technique and a recently developed approach for reconstructing the core location of an EAS can significantly increase the sensitive area of a surface array.

  9. Analysis and Application of River Surface Line in Hilly Area based on Hec-ras Model

    Directory of Open Access Journals (Sweden)

    Yang Congshan

    2017-01-01

    Full Text Available For example—Cixian Fuyang River Regulation Project. Due to the character that Fuyang River is located in hilly areas of Cixian, we use the Hex-ras software to calculate the status of the river water surface line for the goal of determining the final treatment plan. We maintain the present situation of the river channel design as principle, select the most appropriate pushed water level and roughnessas the basic, and we combine the classification calculation of crossing structures of backwater and the encryption calculation section to get the more accurate result. We compare the water level elevation and the calculation of cross strait, analyze the design parameters, calculate repeated the water line section, analyze the rationality of the design plan, and then finally determine the applicability of Hex-rac software in the large continuous variation of cross section of embankment of river river surface line.

  10. MODELLING OF SURFACE OZONE USING ARTIFICIAL NEURAL NETWORK IN AN URBAN AREA

    Directory of Open Access Journals (Sweden)

    S.Stephen Rajkumar Inbanathan,

    2011-02-01

    Full Text Available In this paper a novel approach, based on a neural network structure, is introduced in order to face with the problem of pollutant estimation in an urban area. A neural architecture, based essentiallyon suitable number of layers devoted to predict alarm situations and to estimate the value of the pollutant, has been implemented. A new method for short term prediction is presented using the neural network technique. Due to increase in industrial and anthropogenic activity, air pollution is a serious subject of concern today. Surface ozone prediction using the technique of adaptive pattern recognition is developed. The model can predict the mean surface ozone based on the parameters like Nitrogen-dioxide, temperature and % Relative Humidity, wind direction, wind speed. The model can perform well both in training and independent periods. The classical methods of short term modeling are not reliable enough. The method can also be used for short term prediction of other air pollutants.

  11. Asphalt-derived high surface area activated porous carbons for carbon dioxide capture.

    Science.gov (United States)

    Jalilov, Almaz S; Ruan, Gedeng; Hwang, Chih-Chau; Schipper, Desmond E; Tour, Josiah J; Li, Yilun; Fei, Huilong; Samuel, Errol L G; Tour, James M

    2015-01-21

    Research activity toward the development of new sorbents for carbon dioxide (CO2) capture have been increasing quickly. Despite the variety of existing materials with high surface areas and high CO2 uptake performances, the cost of the materials remains a dominant factor in slowing their industrial applications. Here we report preparation and CO2 uptake performance of microporous carbon materials synthesized from asphalt, a very inexpensive carbon source. Carbonization of asphalt with potassium hydroxide (KOH) at high temperatures (>600 °C) yields porous carbon materials (A-PC) with high surface areas of up to 2780 m(2) g(-1) and high CO2 uptake performance of 21 mmol g(-1) or 93 wt % at 30 bar and 25 °C. Furthermore, nitrogen doping and reduction with hydrogen yields active N-doped materials (A-NPC and A-rNPC) containing up to 9.3% nitrogen, making them nucleophilic porous carbons with further increase in the Brunauer-Emmett-Teller (BET) surface areas up to 2860 m(2) g(-1) for A-NPC and CO2 uptake to 26 mmol g(-1) or 114 wt % at 30 bar and 25 °C for A-rNPC. This is the highest reported CO2 uptake among the family of the activated porous carbonaceous materials. Thus, the porous carbon materials from asphalt have excellent properties for reversibly capturing CO2 at the well-head during the extraction of natural gas, a naturally occurring high pressure source of CO2. Through a pressure swing sorption process, when the asphalt-derived material is returned to 1 bar, the CO2 is released, thereby rendering a reversible capture medium that is highly efficient yet very inexpensive.

  12. A Framework for Analyzing the Whole Body Surface Area from a Single View

    Science.gov (United States)

    Doretto, Gianfranco; Adjeroh, Donald

    2017-01-01

    We present a virtual reality (VR) framework for the analysis of whole human body surface area. Usual methods for determining the whole body surface area (WBSA) are based on well known formulae, characterized by large errors when the subject is obese, or belongs to certain subgroups. For these situations, we believe that a computer vision approach can overcome these problems and provide a better estimate of this important body indicator. Unfortunately, using machine learning techniques to design a computer vision system able to provide a new body indicator that goes beyond the use of only body weight and height, entails a long and expensive data acquisition process. A more viable solution is to use a dataset composed of virtual subjects. Generating a virtual dataset allowed us to build a population with different characteristics (obese, underweight, age, gender). However, synthetic data might differ from a real scenario, typical of the physician’s clinic. For this reason we develop a new virtual environment to facilitate the analysis of human subjects in 3D. This framework can simulate the acquisition process of a real camera, making it easy to analyze and to create training data for machine learning algorithms. With this virtual environment, we can easily simulate the real setup of a clinic, where a subject is standing in front of a camera, or may assume a different pose with respect to the camera. We use this newly designated environment to analyze the whole body surface area (WBSA). In particular, we show that we can obtain accurate WBSA estimations with just one view, virtually enabling the possibility to use inexpensive depth sensors (e.g., the Kinect) for large scale quantification of the WBSA from a single view 3D map. PMID:28045895

  13. Self-assembly of virus-structured high surface area nanomaterials and their application as battery electrodes.

    Science.gov (United States)

    Royston, Elizabeth; Ghosh, Ayan; Kofinas, Peter; Harris, Michael T; Culver, James N

    2008-02-05

    High area nickel and cobalt surfaces were assembled using modified Tobacco mosaic virus (TMV) templates. Rod-shaped TMV templates (300 x 18 nm) engineered to encode unique cysteine residues were self-assembled onto gold patterned surfaces in a vertically oriented fashion, producing a >10-fold increase in surface area. Electroless deposition of ionic metals onto surface-assembled virus templates produced uniform metal coatings up to 40 nm in thickness. Within a nickel-zinc battery system, the incorporation of virus-assembled electrode surfaces more than doubled the total electrode capacity. When combined, these findings demonstrate that surface-assembled virus templates provide a robust platform for the fabrication of oriented high surface area materials.

  14. Spatial heterogeneity of satellite derived land surface parameters and energy flux densities for LITFASS-area

    Directory of Open Access Journals (Sweden)

    A. Tittebrand

    2009-03-01

    Full Text Available Based on satellite data in different temporal and spatial resolution, the current use of frequency distribution functions (PDF for surface parameters and energy fluxes is one of the most promising ways to describe subgrid heterogeneity of a landscape. Objective of this study is to find typical distribution patterns of parameters (albedo, NDVI for the determination of the actual latent heat flux (L.E determined from highly resolved satellite data within pixel on coarser scale.

    Landsat ETM+, Terra MODIS and NOAA-AVHRR surface temperature and spectral reflectance were used to infer further surface parameters and radiant- and energy flux densities for LITFASS-area, a 20×20 km2 heterogeneous area in Eastern Germany, mainly characterised by the land use types forest, crop, grass and water. Based on the Penman-Monteith-approach L.E, as key quantity of the hydrological cycle, is determined for each sensor in the accordant spatial resolution with an improved parametrisation. However, using three sensors, significant discrepancies between the inferred parameters can cause flux distinctions resultant from differences of the sensor filter response functions or atmospheric correction methods. The approximation of MODIS- and AVHRR- derived surface parameters to the reference parameters of ETM (via regression lines and histogram stretching, respectively, further the use of accurate land use classifications (CORINE and a new Landsat-classification, and a consistent parametrisation for the three sensors were realized to obtain a uniform base for investigations of the spatial variability.

    The analyses for 4 scenes in 2002 and 2003 showed that for forest clear distribution-patterns for NDVI and albedo are found. Grass and crop distributions show higher variability and differ significantly to each other in NDVI but only marginal in albedo. Regarding NDVI-distribution functions NDVI was found to be the key variable for L.E-determination.

  15. Indexing of renal function parameters by body surface area: intelligence or folly?

    Science.gov (United States)

    Delanaye, Pierre; Krzesinski, Jean-Marie

    2011-01-01

    Indexation of glomerular filtration rate (GFR) by body surface area (BSA) is often done without raising any questions. In this article, we will shortly review the limitations of such indexation and illustrate potential errors in clinical practice due to this indexation. Adjusting the GFR by BSA is particularly misleading in patients with abnormal body size (obese and anorectic). We will also insist on the fact that indexation by BSA is not required for the GFR longitudinal follow-up. Additionally, we will discuss the implications and consequences of BSA indexation on the creatinine-based equations, such as the Cockcroft-Gault and the MDRD study equations.

  16. Form function and variation of burning surface area for hexa-tubular charge

    Directory of Open Access Journals (Sweden)

    J. N. Kapur

    1964-10-01

    Full Text Available The problem of combustion of a hexa-tubular charge, which is a cylindrical charge with six holes of equal diameters- one at the centre and the other five symmetrically situated about it, has been considered in this paper. The burning of the charge proceeds in three distinct phases for each of which the form function and variation of burning surface area has been investigated. Equivalent form-factor has also been found. Numerical results for some important cases are tabulated.

  17. Nitrogen-doped porous carbon with an ultrahigh specific surface area for superior performance supercapacitors

    Science.gov (United States)

    Long, Chao; Zhuang, Jianle; Xiao, Yong; Zheng, Mingtao; Hu, Hang; Dong, Hanwu; Lei, Bingfu; Zhang, Haoran; Liu, Yingliang

    2016-04-01

    Owing to its abundant nitrogen content, silk cocoon is a promising precursor for the synthesis of Nitrogen-doped porous carbon (N-PC). Using a simple staged KOH activation, the prepared sample displays particular nanostructure with ultrahigh specific surface area (3841 m2 g-1) and appropriate pore size, providing favorable pathways for transportation and penetration of electrolyte ions. Additionally, the doped nitrogen atoms ensure the samples with pseudocapacitive behavior. Those special characteristics endow N-PCs with high capacity, low resistance, and long-term stability, indicating a wonderful potential for application in energy-storage devices.

  18. Measurement of Specific Surface Area of Ceramisite Made from River Sediment

    Institute of Scientific and Technical Information of China (English)

    LIU Gui-yun; XI Dan-li

    2002-01-01

    Principle and method of measuring Specific Surface Area (SSA) of ceramisite made from dredged river sediment,sewage sludge and adherent materials are discussed.Brunauer-Fmmett- Teller Procedure tests SSA of the ceramisite. Influences of sewage sludge content,adherent content and sintering point on the SSA of ceramisite made of river sediment are also analyzed.Results show that with the right sewage sludge content,adherent content and sintering point, the ceramisite can have the highest SSA value and be widely used.

  19. Understanding the growth mechanism of carbon nanotubes via the ``cluster volume to surface area" model

    Science.gov (United States)

    Mandati, Sreekanth; Kunstmann, Jens; Boerrnert, Felix; Schoenfelder, Ronny; Ruemmeli, Mark; Kar, Kamal K.; Cuniberti, Gianaurelio

    2010-03-01

    The influence of mixed catalysts for the high yield production of carbon nanotubes (CNTs) has been studied systematically. Based on extensive experimental data a ``Catalyst Volume to Surface Area'' (CVSA) model was developed to understand the influence of the process parameters on the yield and CNT diameter distribution [1]. In our study, we present a refined version of the CVSA model developed by combining experiments and simulations. We discuss our current understanding of the growth mechanism and how the model might be used to increase CNT yields by using mixed catalysts.[4pt] [1] S. Tetali et al., ACS Nano (2009), DOI: 10.1021/nn9012548.

  20. Relationship between surface area and crystal size of pure and doped cerium oxides

    Institute of Scientific and Technical Information of China (English)

    C.; Bueno-Ferrer; S.; Parres-Esclapez; D.; Lozano-Castelló; A.; Bueno-López

    2010-01-01

    Pure and Zr, La or Pr-doped cerium oxides were characterised by transmission electron microscopy (TEM), N2 adsorption-desorption at -196 oC and X-ray diffraction (XRD). For crystal sizes calculation, the Scherrer and Williamson-Hall equations were compared, and the relationship between surface area and crystal size was critically discussed. It was demonstrated that the Williamson-Hall equation must be used instead of the Scherrer equation to calculate crystal sizes, since the latter equation underestimated ...

  1. octanol/water partition coefficient using solvation free energy and solvent-accessible surface area

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The regression model for octanol/water partition coefficients (Kow ), is founded with only two molecular descriptors available through quantum chemical calculations: solvation free energy (△ Gs ), and solvent-accessible surface area (SASA). For the properties of 47 organic compounds from 17 types, the model gives a oonection coefficient (adjusted for degrees of freedom) of 0.959 and a standard error of 0.277 log unit. It is a suitable way to predict the partition properties that are related to solute-solvent interactions in the water phase.

  2. Body conformable 915 MHz microstrip array applicators for large surface area hyperthermia

    Energy Technology Data Exchange (ETDEWEB)

    Lee, E.R.; Tarczy-Hornoch, P.; Kapp, S.; Fessenden, P.; Lohrbach, A.W.; Prionas, S.D. (Stanford University Medical Center, CA (United States)); Wilsey, T. (Carian Associates, Palo Alto, CA (United States))

    1992-01-01

    The optimal treatment with hyperthermia of superficially located tumors which involve large surface areas requires applicators which can physically conform to body contours, and locally alter their power deposition patterns to adjust for nonuniform temperature caused by tissue inhomogeneities and blood flow variations. A series of 915 MHz microstrip array applicators satisfying these criteria have been developed and clinically tested. Clinical and engineering design tradeoffs for practical devices are discussed. Measurements taken in tissue equivalent phantoms and a summary of clinical experiences with these microstrip arrays are presented.

  3. Estimation of surface area and pore volume of activated carbons by methylene blue and iodine numbers

    Directory of Open Access Journals (Sweden)

    Cleiton A. Nunes

    2011-01-01

    Full Text Available Data of methylene blue number and iodine number of activated carbons samples were calibrated against the respective surface area, micropore volume and total pore volume using multiple regression. The models obtained from the calibrations were used in predicting these physical properties of a test group of activated carbon samples produced from several raw materials. In all cases, the predicted values were in good agreement with the expected values. The method allows extracting more information from the methylene blue and iodine adsorption studies than normally obtained with this type of material.

  4. Experimental investigation of the influences of shape and surface area on the EGR cooler efficiency

    Science.gov (United States)

    Jang, Sanghoon; Park, Sangki; Choi, Kapseung; Kim, Hyungman

    2011-06-01

    The cooled EGR system is one of the most effective techniques currently available for reducing NOx emissions. In this study, engine dynamometer experiments were performed to investigate the efficiencies of the shell and tube-type and stack-type EGR coolers. The results show that the heat exchange of the stack-type EGR cooler is much more effective than that of the shell and tube type because of the increased surface area and better mixing of the coolant flow, and also more PM is produced at low exhaust gas temperature than at high temperature.

  5. Facile syntheses of 3-dimension graphene aerogel and nanowalls with high specific surface areas

    Science.gov (United States)

    Zhou, Lina; Yang, Zhongbo; Yang, Jun; Wu, Yonggang; Wei, Dongshan

    2017-06-01

    We propose facile synthesis methods to prepare two three-dimension (3D) multi-porous graphene structures including graphene aerogel and graphene nanowalls. The graphene aerogel was prepared via the hydrothermal reduction and tert-butanol freeze-drying. The graphene nanowalls were prepared by growing the obtained graphene aerogel via a plasma enhanced chemical vapor deposition (PECVD). High specific surface areas of these two structures up to 795 m2/g were obtained by BET analyses. The crystallized, multi-porous, and thermal stable features of these two 3D graphene structures were verified via the X-ray diffraction, SEM, Raman spectroscopy and thermal gravity analysis characterizations.

  6. Determination of surface areas and functional group in carbons by immersion microcalorimetry

    Energy Technology Data Exchange (ETDEWEB)

    Baquero-Haeberlin, M.C.; Giraldo, L.; Moreno, J.C.; Gomez, A. [Universidad Nacional de Colombia, Santafe de Bogota (Colombia). Dept. de Quimica

    1997-12-31

    A batch-type heat conduction microcalorimeter is designed and constructed for the determination of immersion heats of microporous solids in polar and non polar solvents. The equipment was employed in the determination of surface areas of several activated carbons, ranging from 250 to 1500 m{sup 2} g{sup -1}, with imprecision of 0.45%. The results are in concordance with the theoretical predictions of Stoeckli-Kraehnbuehl and Stoeckli-Bansal-Donnet equation. The immersion heats of activated carbons in 0.1 M NaOH and 0.1 M HCl were determinated and related to the number of acid and basic groups. (orig.)

  7. Identification of motility clusters per area in surfaces colonized by Pseudomonas aeruginosa

    Science.gov (United States)

    Guzman, M.; Pastore, J.; Murialdo, S.; Ballarin, V.; Trivi, M.

    2011-12-01

    The biofilms are involved in pathogenesis and antibiotic persistence and resistance. The number of cells of a given species that will adhere to surfaces depends not only on the affinity of the cells but also on their number available for attachment. Therefore, the quick identification of the motile microorganism's area should be of great interest. The analysis of bacterial spatial patterns at the initial stage of biofilm formation is very important to know the success of the bacterial colonization. We propose a post processing method capable to distinguish motile microorganisms area of colonization in dynamic speckle images by applying Mathematical Morphologic techniques. The methodology would be effective for segmenting, detecting and describing patterns of colonization known not to be completely spatially random. The presented method is fast, reproducible, convenient, robust, and can be used to control the pattern, spacing, and orientation between colonies of different bacteria in order to prevent biofilm development.

  8. High Surface Area Nanoporous Ti02 Coating for Effective Water Condensation.

    Science.gov (United States)

    Kaynar, Mehmet; McGarity, Mark; Yassitepe, Emre; Shah, S.

    2013-03-01

    A water collection device utilizing nanoparticles has been researched, towards the possible goal of providing water in much needed areas on Earth. Titanium dioxide nanoparticles were spray coated on stainless steel substrates to measure their effect on atmospheric water condensation. A simple thermoelectric cooler, also called a Peltier device, was used to lower the temperature of the coated and uncoated stainless steel substrates to below the dew point temperature of the surrounding air. The thickness of the spray coating was varied to measure its effect on water condensation. This increase in surface area had a direct effect on the amount of water condensed. Compared with bare stainless steel, the TiO2 spray coated stainless steel had a considerably smaller contact angle of H20 droplets. In addition, the super-hydrophilic properties of TiO2 allowed water to flow more easily off the device. Supported by TUBITAK-BIDEB 2214-Abroad Research Scholarship program.

  9. Surface Area Variability of a North-Central Tanzanian Crater Lake

    Directory of Open Access Journals (Sweden)

    Lindsey Higgins

    2016-06-01

    Full Text Available A history of modern (1973–2015 surface area variability for Lake Basotu in north-central Tanzania has been reconstructed using archived Landsat images from the dry season between June and October. This record was compared to local weather data as well as larger scale weather patterns. The lake has been in a state of decline interrupted by major flood events since the beginning of the satellite record. From 1973 to 1997, the lake area was between 0.97 km2 and 4.28 km2. Lake extent abruptly increased to 13.86 km2 in 1998, when a co-occurrence of El Niño and a positive Indian Ocean Dipole led to extensive flooding. It is hypothesized that local agricultural practices leading to soil erosion and subsequent basin sedimentation have most likely increased the sensitivity of Lake Basotu to climatic fluctuations.

  10. Low surface area graphene/cellulose composite as a host matrix for lithium sulphur batteries

    Science.gov (United States)

    Patel, Manu U. M.; Luong, Nguyen Dang; Seppälä, Jukka; Tchernychova, Elena; Dominko, Robert

    2014-05-01

    Graphene/cellulose composites were prepared and studied as potential host matrixes for sulphur impregnation and use in Li-S batteries. We demonstrate that with the proper design of a relatively low surface area graphene/cellulose composite, a high electrochemical performance along with good cyclability can be achieved. Graphene cellulose composites are built from two constituents: a two-dimensional electronic conductive graphene and cellulose fibres as a structural frame; together they form a laminar type of pore. The graphene sheets that uniformly anchor sulphur molecules provide confinement ability for polysulphides, sufficient space to accommodate sulphur volumetric expansion, a large contact area with the sulphur and a short transport pathway for both electrons and lithium ions. Nano-cellulose prevents the opening of graphene sheets due to the volume expansion caused by dissolved polysulphides during battery operation. This, in turn, prevents the diffusion of lithium polysulphides into the electrolyte, enabling a long cycle life.

  11. Dose-area product and entrance surface dose in paediatric radiography

    Energy Technology Data Exchange (ETDEWEB)

    Servomaa, A.; Komppa, T.; Parviainen, T.; Heikkilae, M. [STUK - Radiation and Nuclear Safety Authority, Helsinki (Finland)

    2003-06-01

    Dose-area products (DAP) in paediatric radiography were measured in four university hospitals in Finland. The entrance surface dose (ESD) was calculated from the measured DAP value for each radiographic projection. The purpose was to combine the results with other European studies for development of diagnostic reference levels for paediatric X-ray examinations. The study included 740 paediatric patients, and a total of 1500 single projections were recorded, including 660 projections from extremities. Results were compared with recommended best practices and diagnostic reference levels for ESD. Ratios of DAP to ESD were studied to estimate the levels of DAP corresponding to recommended ESD reference levels. It is desirable for practical purposes that diagnostic reference levels for radiographic projections are also expressed in terms of dose-area product. (orig.)

  12. Automated Generation of Digital Terrain Model using Point Clouds of Digital Surface Model in Forest Area

    Directory of Open Access Journals (Sweden)

    Yoshikazu Kamiya

    2011-04-01

    Full Text Available At present, most of the digital data acquisition methods generate Digital Surface Model (DSM and not a Digital Elevation Model (DEM. Conversion from DSM to DEM still has some drawbacks, especially the removing of off terrain point clouds and subsequently the generation of DEM within these spaces even though the methods are automated. In this paper it was intended to overcome this issue by attempting to project off terrain point clouds to the terrain in forest areas using Artificial Neural Networks (ANN instead of removing them and then filling gaps by interpolation. Five sites were tested and accuracies assessed. They all give almost the same results. In conclusion, the ANN has ability to obtain the DEM by projecting the DSM point clouds and greater accuracies of DEMs were obtained. If the size of the hollow areas resulting from the removal of DSM point clouds are larger the accuracies are reduced.

  13. Protein-protein interactions: general trends in the relationship between binding affinity and interfacial buried surface area.

    Science.gov (United States)

    Chen, Jieming; Sawyer, Nicholas; Regan, Lynne

    2013-04-01

    Protein-protein interactions play key roles in many cellular processes and their affinities and specificities are finely tuned to the functions they perform. Here, we present a study on the relationship between binding affinity and the size and chemical nature of protein-protein interfaces. Our analysis focuses on heterodimers and includes curated structural and thermodynamic data for 113 complexes. We observe a direct correlation between binding affinity and the amount of surface area buried at the interface. For a given amount of surface area buried, the binding affinity spans four orders of magnitude in terms of the dissociation constant (Kd ). Across the entire dataset, we observe no obvious relationship between binding affinity and the chemical composition of the interface. We also calculate the free energy per unit surface area buried, or "surface energy density," of each heterodimer. For interfacial surface areas between 500 and 2000 Å(2) , the surface energy density decreases as the buried surface area increases. As the buried surface area increases beyond about 2000 Å(2) , the surface energy density levels off to a constant value. We believe that these analyses and data will be useful for researchers with an interest in understanding, designing or inhibiting protein-protein interfaces.

  14. Changes in satellite-derived impervious surface area at US historical climatology network stations

    Science.gov (United States)

    Gallo, Kevin; Xian, George

    2016-10-01

    The difference between 30 m gridded impervious surface area (ISA) between 2001 and 2011 was evaluated within 100 and 1000 m radii of the locations of climate stations that comprise the US Historical Climatology Network. The amount of area associated with observed increases in ISA above specific thresholds was documented for the climate stations. Over 32% of the USHCN stations exhibited an increase in ISA of ⩾20% between 2001 and 2011 for at least 1% of the grid cells within a 100 m radius of the station. However, as the required area associated with ISA change was increased from ⩾1% to ⩾10%, the number of stations that were observed with a ⩾20% increase in ISA between 2001 and 2011 decreased to 113 (9% of stations). When the 1000 m radius associated with each station was examined, over 52% (over 600) of the stations exhibited an increase in ISA of ⩾20% within at least 1% of the grid cells within that radius. However, as the required area associated with ISA change was increased to ⩾10% the number of stations that were observed with a ⩾20% increase in ISA between 2001 and 2011 decreased to 35 (less than 3% of the stations). The gridded ISA data provides an opportunity to characterize the environment around climate stations with a consistently measured indicator of a surface feature. Periodic evaluations of changes in the ISA near the USHCN and other networks of stations are recommended to assure the local environment around the stations has not significantly changed such that observations at the stations may be impacted.

  15. CONTROL OF METAL SURFACES MACHINED IN ACCORDANCE WITH THE DIAMOND NANOMACHINING TECHNOLOGY BASED ON THE ELECTRON WORK FUNCTION

    Directory of Open Access Journals (Sweden)

    G. V. Sharonov

    2015-01-01

    Full Text Available Dimensional machining technology is based on the use of integrated geometric parameters of machined surfaces. Technological impact of a pick results in oxidation processes and changes in physic-chemical parameters of surface. Control of only geometric parameters is insufficient to describe characteristics of machining and formation of ultra-smooth surfaces. The electron work function is therefore used. The aim of the work was to study electrophysical states of optic surfaces of non-ferrous metals and alloys in relation to geometric and physic-chemical parameters according to the distribution of the electron work function over the surface. We conducted the study on experimental metal samples made of copper and aluminum alloy, machined in accordance with the diamond nanomachining technology. The diamond nanomachining technology would be capable of ensuring the roughness of non-ferrous metals and alloys machined at the level of Ra ≤ 0,005 µm. Modernized Kelvin probe was used as the registration technique of the changes of the electron work function over the surface. Dependence between the electron work function value, as well as its alteration and the physicchemical and geometric parameters of a surface has been determined. It has been shown that the diamond nanomachining technology makes it possible to obtain electro-physically uniform optical surfaces on copper and aluminum alloy with the minimal range of the distribution of the electric potential over the surface

  16. Impacts of urban land-surface forcing on ozone air quality in the Seoul metropolitan area

    Directory of Open Access Journals (Sweden)

    Y.-H. Ryu

    2013-02-01

    Full Text Available Modified local meteorology owing to heterogeneities in the urban–rural surface can affect urban air quality. In this study, the impacts of urban land-surface forcing on ozone air quality during a high ozone (O3 episode in the Seoul metropolitan area, South Korea, are investigated using a high-resolution chemical transport model (CMAQ. Under fair weather conditions, the temperature excess (urban heat island significantly modifies boundary layer characteristics/structures and local circulations. The modified boundary layer and local circulations result in an increase in O3 levels in the urban area of 16 ppb in the nighttime and 13 ppb in the daytime. Enhanced turbulence in the deep urban boundary layer dilutes pollutants such as NOx, and this contributes to the elevated O3 levels through the reduced O3 destruction by NO in the NOx-rich environment. The advection of O3 precursors over the mountains near Seoul by the prevailing valley-breeze circulation in the mid- to late morning results in the build-up of O3 over the mountains in conjunction with biogenic volatile organic compound (BVOC emissions there. As the prevailing local circulation in the afternoon changes to urban-breeze circulation, the O3-rich air masses over the mountains are advected over the urban area. The urban-breeze circulation exerts significant influences on not only the advection of O3 but also the chemical production of O3 under the circumstances in which both anthropogenic and biogenic (natural emissions play important roles in O3 formation. As the air masses that are characterized by low NOx and high BVOC levels and long OH chain length are advected over the urban area from the surroundings, the ozone production efficiency increases in the urban area. The relatively strong vertical mixing in the urban boundary layer embedded in the

  17. Spatio-Temporal Modelling of Dust Transport over Surface Mining Areas and Neighbouring Residential Zones

    Directory of Open Access Journals (Sweden)

    Eva Gulikova

    2008-06-01

    Full Text Available Projects focusing on spatio-temporal modelling of the living environment need to manage a wide range of terrain measurements, existing spatial data, time series, results of spatial analysis and inputs/outputs from numerical simulations. Thus, GISs are often used to manage data from remote sensors, to provide advanced spatial analysis and to integrate numerical models. In order to demonstrate the integration of spatial data, time series and methods in the framework of the GIS, we present a case study focused on the modelling of dust transport over a surface coal mining area, exploring spatial data from 3D laser scanners, GPS measurements, aerial images, time series of meteorological observations, inputs/outputs form numerical models and existing geographic resources. To achieve this, digital terrain models, layers including GPS thematic mapping, and scenes with simulation of wind flows are created to visualize and interpret coal dust transport over the mine area and a neighbouring residential zone. A temporary coal storage and sorting site, located near the residential zone, is one of the dominant sources of emissions. Using numerical simulations, the possible effects of wind flows are observed over the surface, modified by natural objects and man-made obstacles. The coal dust drifts with the wind in the direction of the residential zone and is partially deposited in this area. The simultaneous display of the digital map layers together with the location of the dominant emission source, wind flows and protected areas enables a risk assessment of the dust deposition in the area of interest to be performed. In order to obtain a more accurate simulation of wind flows over the temporary storage and sorting site, 3D laser scanning and GPS thematic mapping are used to create a more detailed digital terrain model. Thus, visualization of wind flows over the area of interest combined with 3D map layers enables the exploration of the processes of coal dust

  18. 30 CFR 57.4660 - Work in shafts, raises, or winzes and other activities involving hazard areas.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Work in shafts, raises, or winzes and other activities involving hazard areas. 57.4660 Section 57.4660 Mineral Resources MINE SAFETY AND HEALTH... non-fire-retardant wood. Thawing pipes electrically, except with heat tape More than 10 pounds...

  19. Phase 1 RCRA Facility Investigation and Corrective Measures Study Work Plan for Single Shell Tank Waste Management Areas

    Energy Technology Data Exchange (ETDEWEB)

    ROGERS, P.M.

    2000-06-01

    This document is the master work plan for the Resource Conservation and Recovery Act of 1976 (RCRA) for single-shell tank (SST) farms at the Hanford Site. Evidence indicates that releases at four of the seven SST waste management areas have impacted.

  20. Experiments in Area of Musical Sound in the Chamber and Instrumental Works by Rodion Shchedrin

    Directory of Open Access Journals (Sweden)

    Zaytseva Marina

    2016-10-01

    Full Text Available The article scientifically proves the peculiarities of Rodion Shchedrin’s musical thinking. Having analysed such piano works by Rodion Shchedrin as "Imitating Albéniz", "Humoresque", arranged for violin and piano by D. M. Tsyganov, "Balalaika" for solo violin without a bow, there have been identified composer’s innovations in the field of violin sound. It has been proved that the search for new expressive violin-coloristic resources was due to the desire of the composer to discover the new worlds of sound, create an original work, which would masterfully implement the most complex creative tasks.

  1. A new synthesis route to high surface area sol gel bioactive glass through alcohol washing

    Science.gov (United States)

    M. Mukundan, Lakshmi; Nirmal, Remya; Vaikkath, Dhanesh; Nair, Prabha D.

    2013-01-01

    Bioactive glass is one of the widely used bone repair material due to its unique properties like osteoconductivity, osteoinductivity and biodegradability. In this study bioactive glass is prepared by the sol gel process and stabilized by a novel method that involves a solvent instead of the conventional calcinations process. This study represents the first attempt to use this method for the stabilization of bioactive glass. The bioactive glass stabilized by this ethanol washing process was characterized for its physicochemical and biomimetic property in comparison with similar composition of calcined bioactive glass. The compositional similarity of the two stabilized glass powders was confirmed by spectroscopic and thermogravimetric analysis. Other physicochemical characterizations together with the cell culture studies with L929 fibroblast cells and bone marrow mesenchymal stem cells proved that the stabilization was achieved with the retention of its inherent bioactive potential. However an increase in the surface area of the glass powder was obtained as a result of this ethanol washing process and this add up to the success of the study. Hence the present study exhibits a promising route for high surface area bioactive glass for increasing biomimicity. PMID:23512012

  2. High-Surface-Area Nitrogen-Doped Reduced Graphene Oxide for Electric Double-Layer Capacitors.

    Science.gov (United States)

    Youn, Hee-Chang; Bak, Seong-Min; Kim, Myeong-Seong; Jaye, Cherno; Fischer, Daniel A; Lee, Chang-Wook; Yang, Xiao-Qing; Roh, Kwang Chul; Kim, Kwang-Bum

    2015-06-08

    A two-step method consisting of solid-state microwave irradiation and heat treatment under NH3 gas was used to prepare nitrogen-doped reduced graphene oxide (N-RGO) with a high specific surface area (1007 m(2)  g(-1) ), high electrical conductivity (1532 S m(-1) ), and low oxygen content (1.5 wt %) for electrical double-layer capacitor applications. The specific capacitance of N-RGO was 291 F g(-1) at a current density of 1 A g(-1) , and a capacitance of 261 F g(-1) was retained at 50 A g(-1) , which indicated a very good rate capability. N-RGO also showed excellent cycling stability and preserved 96 % of the initial specific capacitance after 100 000 cycles. Near-edge X-ray absorption fine-structure spectroscopy results provided evidenced for the recovery of π conjugation in the carbon networks with the removal of oxygenated groups and revealed chemical bonding of the nitrogen atoms in N-RGO. The good electrochemical performance of N-RGO is attributed to its high surface area, high electrical conductivity, and low oxygen content.

  3. Porous boron nitride with a high surface area: hydrogen storage and water treatment.

    Science.gov (United States)

    Li, Jie; Lin, Jing; Xu, Xuewen; Zhang, Xinghua; Xue, Yanming; Mi, Jiao; Mo, Zhaojun; Fan, Ying; Hu, Long; Yang, Xiaojing; Zhang, Jun; Meng, Fanbin; Yuan, Songdong; Tang, Chengchun

    2013-04-19

    We report on the synthesis of high-quality microporous/mesoporous BN material via a facile two-step approach. An extremely high surface area of 1687 m(2) g(-1) and a large pore volume of 0.99 cm(3) g(-1) have been observed in the synthesized BN porous whiskers. The formation of the porous structure was attributed to the group elimination of organic species in a BN precursor, melamine diborate molecular crystal. This elimination method maintained the ordered pore structure and numerous structural defects. The features including high surface area, pore volume and structural defects make the BN whiskers highly suitable for hydrogen storage and wastewater treatment applications. We demonstrate excellent hydrogen uptake capacity of the BN whiskers with high weight adsorption up to 5.6% at room temperature and at the relatively low pressure of 3 MPa. Furthermore, the BN whiskers also exhibit excellent adsorption capacity of methyl orange and copper ions, with the maximum removal capacity of 298.3 and 373 mg g(-1) at 298 K, respectively.

  4. Porous MgO material with ultrahigh surface area as the matrix for phase change composite

    Energy Technology Data Exchange (ETDEWEB)

    Hao, Yonggan; Shao, Xiankun; Liu, Tongxuan [School of Materials Science and Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001 (China); Li, Benxia, E-mail: libx@mail.ustc.edu.cn [School of Materials Science and Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001 (China); Nie, Shibin, E-mail: nsb@mail.ustc.edu.cn [School of Energy Resources and Safety, Anhui University of Science and Technology, Huainan, Anhui 232001 (China)

    2015-03-20

    Highlights: • Porous MgO material with ultrahigh surface area was synthesized. • A composite PCM was prepared from PEG-1000 and the porous MgO. • The phase change temperatures and enthalpy of the composite were measured. • The composite PCM performed good shape-stabilized property. - Abstract: Mesoporous magnesium oxide (MgO) material was synthesized using an integration of the evaporation-induced surfactant assembly and magnesium nitrate pyrolysis. The as-prepared MgO material is well crystalline, and possesses three-dimensional interconnected mesopores and a surface area as high as 596 m{sup 2}/g. Using the porous MgO as a matrix and polyethylene glycol (PEG-1000) as the functional phase for heat energy storage, a shape-stabilized phase change composite of PEG/MgO was fabricated by an easy impregnation method. In the composite, mesoporous MgO material provides structural strength and prevents the leakage of the molten PEG during the phase change process. The compositions and microstructures of the PEG/MgO composite were determined by Fourier transformation infrared spectroscope (FT-IR), X-ray diffractometer (XRD), scanning electronic microscope (SEM) and thermogravimetric analyzer (TGA), respectively. The phase change properties of the PEG/MgO composite were determined by differential scanning calorimeter (DSC). The high heat-energy storage capability and good thermal stability of the composite enable it extensive applications in the future.

  5. Quantifying the effect of waterways and green areas on the surface temperature

    Directory of Open Access Journals (Sweden)

    Elis Dener Lima Alves

    2017-02-01

    Full Text Available The cooling effects of urban parks and green areas, which form the “Park Cool Island” (PCI can help decrease the surface temperature and mitigate the effects of urban heat islands (UHI. Therefore, the objective of this research was to know the temporal variability of PCI intensity, as well as analyze the factors that determines it and propose an equation to predict the PCI intensity in Iporá, Goiás State, Brazil. To this purpose, the PCI intensity values were obtained using the Landsat-8 satellite (band 10, and then correlated with the NDVI and the LAI, in which proposes equations through multiple linear regression to estimate the PCI intensity. The results indicated that: 1 the greater the distance of the natural area, greater the surface temperature; 2 there is a great seasonality in PCI, in which the intensity of PCI is much higher in the spring (or close to it; 3 the relationship between NDVI and LAI variables, showed good coefficients of determination; 4 the equations for the buffer of 200 and 500 m, had low RMSE with high coefficients of determination (r2 = 0.924 and r2 = 0.957 respectively.

  6. Practical split-window algorithm for retrieving land surface temperature over agricultural areas from ASTER data

    Science.gov (United States)

    Wang, Songhan; He, Longhua

    2014-01-01

    A practical split-window algorithm which involves two parameters (transmittance and emissivity) utilized to retrieve land-surface temperature over agricultural areas from the Advanced Spaceborne Thermal Emission and Reflection Radiometer data is presented. First, by calculating the relationship between thermal radiation intensity and temperature, the Planck function is simplified using exponential function which is applied to deduce the split-window algorithm. Second, how to obtain transmittance from water vapor content and the method for estimating emissivity using normalized difference vegetation index are discussed in detail. Sensitivity analysis demonstrates that the algorithm is not sensitive to these two parameters. Finally, a standard atmospheric simulation method has been used to validate the proposed algorithm, and comparison between the algorithm and the prior study has been carried out. The results indicate that the average accuracy is 0.32 K for the case without error in both transmittance and emissivity, which is better than the prior algorithm. The accuracy is also 0.32 K when the transmittance is computed from the water content by piecewise cubic polynomial fit. The accuracy is about 0.30 K˜0.33 K corresponding to different Pv (Pv is the proportion of vegetation) values, which indicates that this algorithm is suitable for different land surface types over agricultural areas.

  7. Influence of wet oxidation on the surface area and the porosity of some lignites

    Energy Technology Data Exchange (ETDEWEB)

    Yaman, S.; Karatepe, N.; Kucukbayrak, S. [Istanbul Technical University, Istanbul (Turkey). Chemical and Metallurgical Engineering Faculty

    2000-07-01

    Influence of wet oxidation on the surface area and the porosity of lignites was investigated using five different Turkish lignites. Lignite samples were oxidised in aqueous medium in a 1 l Parr autoclave at 423 K under 1.5 MPa partial pressure of oxygen for 60 min. Some physical properties such as surface area, bulk density, apparent density, mean pore radius, and porosity of the original and oxidised lignite samples were determined. For this purpose, BET and mercury intrusion porosimetry techniques were performed. In order to examine the effects of oxidation on the functional groups, FT-IR technique was applied for both original and oxidised lignite samples. On the other hand, some inorganic constituents were eliminated from the samples as a result of in situ formation of sulphuric acid from oxidation of sulphur compounds. The changes taken place in the physical properties were studied considering chemical compositions of the samples and the extent of the interaction between the samples and oxygen. 6 refs., 3 figs., 5 tabs.

  8. Water-bathing synthesis of high-surface-area zeolite P from diatomite

    Institute of Scientific and Technical Information of China (English)

    Yucheng Du; Shuli Shi; Hongxing Dai

    2011-01-01

    Zeolite P was synthesized for the first time via a novel water-bathing route at 90℃ using scrubbed diatomite, sodium hydroxide, and aluminum hydroxide as precursor, with SiO2/Al2O3, SiO2/Na2O, and H2O/Na2O molar ratios of 7.43, 3.81, and 80.00, respectively. The as-fabricated samples were characterized by means of scanning electron microscopy, X-ray diffraction, and nitrogen adsorption measurements. This study showed that (i) treating the diatomite raw material with sodium hexametaphosphate could open the pores in the diatomite via removal of the clay clogged in its pores; (ii) tetragonal mesoporous zeolite P samples with a surface area of 56-60 m2/g could be generated after 6-24 h of water-bathing reaction at 90 C; (iii) extension of water-bathing reaction time could improve the mesoporous structure of zeolite P;and (iv) Ca2+ adsorption capacity of the zeolite P sample was about 300 cmol/kg. Such high-surface-area porous zeolite P could be used as an effective adsorbent for the treatment of water containing calcium and magnesium ions.

  9. Synthesis of silica aerogel monoliths with controlled specific surface areas and pore sizes

    Science.gov (United States)

    Gao, Bingying; Lu, Shaoxiang; Kalulu, Mulenga; Oderinde, Olayinka; Ren, Lili

    2017-07-01

    To replace traditional preparation methods of silica aerogels, a small-molecule 1,2-epoxypropane (PO) has been introduced into the preparation process instead of using ammonia as the cross-linking agent, thus generating a lightweight, high porosity, and large surface area silica aerogel monolithic. We put forward a simple solution route for the chemical synthesis of silica aerogels, which was characterized by scanning electron microscopy (SEM), TEM, XRD, FTIR, thermogravimetric analysis (TGA) and the Brunauer-Emmett-Teller (BET) method In this paper, the effect of the amount of PO on the microstructure of silica aerogels is discussed. The BET surface areas and pore sizes of the resulting silica aerogels can be freely adjusted by changing the amount of PO, which will be helpful in promoting the development of silica aerogels to fabricate other porous materials with similar requirements. We also adopted a new organic solvent sublimation drying (OSSD) method to replace traditional expensive and dangerous drying methods such as critical point drying and freeze drying. This simple approach is easy to operate and has good repeatability, which will further facilitate actual applications of silica aerogels.

  10. Reduction Expansion Synthesis as Strategy to Control Nitrogen Doping Level and Surface Area in Graphene

    Directory of Open Access Journals (Sweden)

    Russell Canty

    2015-10-01

    Full Text Available Graphene sheets doped with nitrogen were produced by the reduction-expansion (RES method utilizing graphite oxide (GO and urea as precursor materials. The simultaneous graphene generation and nitrogen insertion reactions are based on the fact that urea decomposes upon heating to release reducing gases. The volatile byproducts perform two primary functions: (i promoting the reduction of the GO and (ii providing the nitrogen to be inserted in situ as the graphene structure is created. Samples with diverse urea/GO mass ratios were treated at 800 °C in inert atmosphere to generate graphene with diverse microstructural characteristics and levels of nitrogen doping. Scanning electron microscopy (SEM and transmission electron microscopy (TEM were used to study the microstructural features of the products. The effects of doping on the samples structure and surface area were studied by X-ray diffraction (XRD, Raman Spectroscopy, and Brunauer Emmet Teller (BET. The GO and urea decomposition-reduction process as well as nitrogen-doped graphene stability were studied by thermogravimetric analysis (TGA coupled with mass spectroscopy (MS analysis of the evolved gases. Results show that the proposed method offers a high level of control over the amount of nitrogen inserted in the graphene and may be used alternatively to control its surface area. To demonstrate the practical relevance of these findings, as-produced samples were used as electrodes in supercapacitor and battery devices and compared with conventional, thermally exfoliated graphene.

  11. Influence of chemical agents on the surface area and porosity of active carbon hollow fibers

    Directory of Open Access Journals (Sweden)

    LJILJANA M. KLJAJEVIĆ

    2011-09-01

    Full Text Available Active carbon hollow fibers were prepared from regenerated polysulfone hollow fibers by chemical activation using: disodium hydrogen phosphate 2-hydrate, disodium tetraborate 10-hydrate, hydrogen peroxide, and diammonium hydrogen phosphate. After chemical activation fibers were carbonized in an inert atmosphere. The specific surface area and porosity of obtained carbons were studied by nitrogen adsorption–desorption isotherms at 77 K, while the structures were examined with scanning electron microscopy and X-ray diffraction. The activation process increases these adsorption properties of fibers being more pronounced for active carbon fibers obtained with disodium tetraborate 10-hydrate and hydrogen peroxide as activator. The obtained active hollow carbons are microporous with different pore size distribution. Chemical activation with phosphates produces active carbon material with small surface area but with both mesopores and micropores. X-ray diffraction shows that besides turbostratic structure typical for carbon materials, there are some peaks which indicate some intermediate reaction products when sodium salts were used as activating agent. Based on data from the electrochemical measurements the activity and porosity of the active fibers depend strongly on the oxidizing agent applied.

  12. Monitoring Child Health: School Doctors at Work in a Dutch Rural Area (1930-1970)

    Science.gov (United States)

    Bakker, Nelleke

    2016-01-01

    From 1948 the World Health Organization expected child hygiene to include mental health. This article discusses the way school doctors adapted their activities and concerns accordingly in the mid-twentieth century in an agrarian-industrial area of the Netherlands. In spite of an improvement in pupils' physical health they shifted their attention…

  13. Determination of the indicators for working with area flooding under nonisothermic filtering conditions

    Energy Technology Data Exchange (ETDEWEB)

    Ushakov, V.V.; Borisov, Yu.P.; Rozenberg, M.D.; Teslyuk, Ye.V.

    1983-01-01

    Engineering methods were developed for computing the nonisothermic displacement of oil by water under conditions of area systems of flooding for layered-heterogeneous beds. It is indicated that the mathematical model realized on a computer which takes into consideration the most important physical phenomena provides the possibility of fully performing the studies and analyzing the technological indicators.

  14. BET surface area distributions in polar stream sediments: Implications for silicate weathering in a cold-arid environment

    Science.gov (United States)

    Marra, Kristen R.; Elwood Madden, Megan E; Soreghan, Gerilyn S.; Hall, Brenda L

    2014-01-01

    BET surface area values are critical for quantifying the amount of potentially reactive sediments available for chemical weathering and ultimately, prediction of silicate weathering fluxes. BET surface area values of fine-grained (glacier surfaces, where dust is trapped and subsequently liberated during summer melting. Additionally, variations in stream discharge rate, which mobilizes sediment in pulses and influences water:rock ratios, the origin and nature of the underlying drift material, and the contribution of organic acids may play significant roles in the production and mobilization of high-surface area sediment. This study highlights the presence of sediments with high surface area in cold-based glacier systems, which influences models of chemical denudation rates and the impact of glacial systems on the global carbon cycle.

  15. Surface area changes of Himalayan ponds as a proxy of hydrological climate-driven fluctuations

    Science.gov (United States)

    Salerno, Franco; Thakuri, Sudeep; Guyennon, Nicolas; Viviano, Gaetano; Tartari, Gianni

    2016-04-01

    The meteorological measurements at high-elevations of the Himalayan range are scarce due to the harsh conditions of these environments which limit the suitable maintenance of weather stations. As a consequence, the meager knowledge on how the climate is changed in the last decades at Himalayan high-elevations sets a serious limit upon the interpretation of relationships between causes and recent observed effects on the cryosphere. Although the glaciers masses reduction in Himalaya is currently sufficiently well described, how changes in climate drivers (precipitation and temperature) have influenced the melting and shrinkage processes are less clear. Consequently, the uncertainty related to the recent past amplifies when future forecasts are done, both for climate and impacts. In this context, a substantial body of research has already demonstrated the high sensitivity of lakes and ponds to climate. Some climate-related signals are highly visible and easily measurable in lakes. For example, climate-driven fluctuations in lake surface area have been observed in many remote sites. On interior Tibetan Plateau the lake growth since the late 1990s is mainly attributed to increased regional precipitation and weakened evaporation. Differently, other authors attribute at the observed increases of lake surfaces at the enhanced glacier melting. In our opinion these divergences found in literature are due to the type of glacial lakes considered in the study and in particular their relationship with glaciers. In general, in Himalaya three types of glacial lakes can be distinguished: (i) lakes that are not directly connected with glaciers, but that may have a glacier located in their basin (unconnected glacial lakes); (ii) supraglacial lakes, which develop on the surface of the glacier downstream; or (iii) proglacial lakes, which are moraine-dammed lakes that are in contact with the glacier front. Some of these lakes store large quantities of water and are susceptible to GLOFs

  16. Preparation of High-Surface Area Nano-CeO2 by Template-Assisted Precipitation Method

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The high-surface area nano-CeO2 was prepared by Ce(NO3)3 by precipitation method, with surfactant cetyltrimethyl ammonium bromide (CTAB) as templating agent. The effects of the precipitating agents, reaction temperature, ageing time, and calcination temperature on the surface area, as well as the pore structure and the mean crystallite size of nano-CeO2 were studied. It was found that the reaction of Ce(NO3)3 with NaOH in the presence of CTAB at 90 ℃ for 12 h yieldsed a cerium oxide/surfactant mixture, which after calcination at 400 ℃ resulted in high-surface area nano-CeO2. The mean crystallite size of CeO2 was approximately 6 nm, surface area was in excess of 200 m2·g-1, pore size was approximately 9 nm, and the pore distribution was concentrative. Moreover, the surface area can still reach 147 m2·g-1 after calcination at 700 ℃, which showed the good thermal stability of the CeO2. The number of oxygen vacancies in the structure of CeO2 corresponded with the surface area of CeO2, and the high surface area was propitious to the formation of oxygen vacancies.

  17. Automatic mapping of urban areas from Landsat data using impervious surface fraction algorithm

    Science.gov (United States)

    Nguyen, S. T.; Chen, C. F.; Chen, C. R.

    2014-12-01

    Urbanization is a result of aggregation of people in urban areas that can help advance socioeconomic development and pull out people from the poverty line. However, if not monitored well, it can also lead to loss of farmlands, natural forests as well as to societal impacts including burgeoning growth of slums, pollution, and crime. Thus, spatiotemporal information that shapes the urbanization is thus critical to the process of urban planning. The overall objective of this study is to develop an impervious surface fraction algorithm (ISFA) for automatically mapping urban areas from Landsat data. We processed the data for 1986, 2001 and 2014 to trace the multi-decadal spatiotemporal change of Honduran capital city using a three-step procedure: (1) data pre-processing to perform image normalization as well as to produce the difference in the values (DVSS) between the simple ratio (SR) of green and shortwave bands and the soil adjust vegetation index (SAVI), (2) quantification of urban areas using ISFA, and (3) accuracy assessment of mapping results using the ground reference data constructed using land-cover maps and FORMOSAT-2 imagery. The mapping accuracy assessment was performed for 2001 and 2014 by comparing with the ground reference data indicated satisfactory results with the overall accuracies and Kappa coefficients generally higher than 90% and 0.8, respectively. When examining the urbanization between these years, it could be observed that the urban area was significantly expanded from 1986 to 2014, mainly driven by two factors of rapid population growth and socioeconomic development. This study eventually leads to a realization of the merit of using ISFA for multi-decadal monitoring of the urbanization of Honduran capital city from Landsat data. Results from this research can be used by urban planners as a general indicator to quantify urban change and environmental impacts. The methods were thus transferable to monitor urban growth in cities and their peri

  18. The relationship between fixed and rotating shifts with job burnout in nurses working in critical care areas

    DEFF Research Database (Denmark)

    Shahriari, Mohsen; Shamali, Mahdi; Yazdannik, Ahmadreza

    2014-01-01

    BACKGROUND: While critical care nurses are vulnerable to burnout because of the complex nature of patients' health problems, working in critical care areas has become even more complicated by shift working schedules. This study aimed to determine the relationship between fixed and rotating shifts...... and burnout in a sample of critical care nurses working in critical care areas. MATERIALS AND METHODS: In this retrospective cohort design, 170 critical care nurses from six selected hospitals were chosen using quota and random sampling and divided into two groups (exposed and non-exposed). Maslach Burnout...... no significant difference in the two groups. Furthermore, the non-exposed group had 10.1 times the odds to expose to EE and 2.2 times the odds to expose to DP in comparison with the exposed group. High levels of burnout in the non-exposed group were 60%, 32.9%, and 27.1%, and in the exposed group were 12.9%, 18...

  19. An Evaluation of Articulatory Working Space Area in Vowel Production of Adults with Down Syndrome

    Science.gov (United States)

    Bunton, Kate; Leddy, Mark

    2011-01-01

    Many adolescents and adults with Down syndrome have reduced speech intelligibility. Reasons for this reduction may relate to differences in anatomy and physiology, both of which are important for creating an intelligible speech signal. The purpose of this study was to document acoustic vowel space and articulatory working space for two adult…

  20. Topographic Effects on the Surface Emissivity of a Mountainous Area Observed by a Spaceborne Microwave Radiometer

    Directory of Open Access Journals (Sweden)

    Frank S. Marzano

    2008-03-01

    Full Text Available A simulation study to understand the influence of topography on the surfaceemissivity observed by a satellite microwave radiometer is carried out. We analyze theeffects due to changes in observation angle, including the rotation of the polarization plane.A mountainous area in the Alps (Northern Italy is considered and the information on therelief extracted from a digital elevation model is exploited. The numerical simulation refersto a radiometric image, acquired by a conically-scanning radiometer similar to AMSR-E,i.e., flying at 705 km of altitude with an observation angle of 55°. To single out the impacton surface emissivity, scattering of the radiation due to the atmosphere or neighboringelevated surfaces is not considered. C and X bands, for which atmospheric effects arenegligible, and Ka band are analyzed. The results indicate that the changes in the localobservation angle tend to lower the apparent emissivity of a radiometric pixel with respectto the corresponding flat surface characteristics. The effect of the rotation of thepolarization plane enlarges (vertical polarization, or attenuates (horizontal polarizationthis decrease. By doing some simplifying assumptions for the radiometer antenna, theconclusion is that the microwave emissivity at vertical polarization is underestimated,whilst the opposite occurs for horizontal polarization, except for Ka band, for which bothunder- and overprediction may occur. A quantification of the differences with respect to aflat soil and an approximate evaluation of their impact on soil moisture retrieval areyielded.