WorldWideScience

Sample records for surface wind doldrums

  1. Ocean surface wind stress

    Science.gov (United States)

    Harrison, D. E.

    1984-01-01

    The need for improved surface wind and wind stress data is discussed. The collection of wind data using ship reports, research buoys, and cloud motion vectors is examined. The need for data on surface-wind stress fields is emphasized. Accurate stress data are required for studying: (1) the normal seasonal cycle and the intraannual events; (2) wind stress curls and the forcing of ocean circulation; (3) El Nino events; and (4) the low response of the midlatitude ocean circulation.

  2. The Techy Teacher/Escaping the Lesson-Planning Doldrums

    Science.gov (United States)

    Tucker, Catlin

    2016-01-01

    With a teacher's busy schedule, it is easy to get stuck in the lesson planning doldrums. However, as this is an era when teachers can easily learn from and share with educators all over the world, and are interacting increasingly with connected and tech-savvy students, their interest in all things digital can be leveraged for learning by teachers…

  3. OW CCMP ocean surface wind

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Cross-Calibrated Multi-Platform (CCMP) Ocean Surface Wind Vector Analyses (Atlas et al., 2011) provide a consistent, gap-free long-term time-series of ocean...

  4. Mapping surface disturbance from wind farms

    Science.gov (United States)

    Diffendorfer, James E.

    2013-04-01

    Wind energy is one of the fastest growing segments of the electricity market and this trend will likely continue as countries strive to reduce CO2 production while meeting growing energy demands. One impact of wind facilities is surface disturbance, including roads, that lead to habitat loss and fragmentation. Numerous studies of wind power utilize estimates of surface disturbance for GIS-based modeling or basic calculations of the land area required to generate energy using wind. However published estimates of the land use required for a MW of electricity from wind facilities vary by more than 10 times (0.83 to 250 MW/Km2). We report results from a geospatial analysis of 39 wind facilities in the United States that we fully digitized using high resolution photo-imagery. The selected sites and analyses were designed to elucidate the effects of turbine size, topography, and land use on the area requirements of wind facilities. The results indicate point estimates of average surface disturbance/MW have wide levels of variation, explained primarily by Landcover and Topography. Wind facilities in agricultural landscapes had smaller surface disturbance/ha than facilities in forests and shrublands, and facilities in relatively flat topography had smaller surface disturbance/ha than facilities on hills, ridges, or mesas. Land use, topography, and turbine size all influenced turbine spacing. The statistical models suggest we can predict geographic locations where new wind facilities could be placed with minimized surface disturbance.

  5. Surface winds over West Antarctica

    Science.gov (United States)

    Bromwich, David

    1993-01-01

    Five winter months (April-August 1988) of thermal infrared satellite images were examined to investigate the occurrence of dark (warm) signatures across the Ross Ice Shelf in the Antarctic continent. These features are inferred to be generated by katabatic winds that descend from southern Marie Byrd Land and then blow horizontally across the ice shelf. Significant mass is added to this airstream by katabatic winds blowing from the major glaciers that flow through the Transantarctic Mountains from East Antarctica. These negatively buoyant katabatic winds can reach the northwestern edge of the shelf - a horizontal propagation distance of up to 1,000 km - 14 percent of the time. Where the airstream crosses from the ice shelf to the ice-covered Ross Sea, a prominent coastal polynya is formed. Because the downslope buoyancy force is near zero over the Ross Ice Shelf, the northwestward propagation of the katabatic air mass requires pressure gradient support. The study shows that the extended horizontal propagation of this atmospheric density current occurred in conjunction with the passage of synoptic cyclones over the southern Amundsen Sea. These cyclones can strengthen the pressure gradient in the interior of West Antarctica and make the pressure field favorable for northwestward movement of the katabatic winds from West Antarctica across the ice shelf in a geostrophic direction. The glacier winds from East Antarctica are further accelerated by the synoptic pressure gradient, usually undergo abrupt adjustment beyond the exit to the glacier valley, and merge into the mountain-parallel katabatic air mass.

  6. Modeling wind adjustment factor and midflame wind speed for Rothermel's surface fire spread model

    Science.gov (United States)

    Patricia L. Andrews

    2012-01-01

    Rothermel's surface fire spread model was developed to use a value for the wind speed that affects surface fire, called midflame wind speed. Models have been developed to adjust 20-ft wind speed to midflame wind speed for sheltered and unsheltered surface fuel. In this report, Wind Adjustment Factor (WAF) model equations are given, and the BehavePlus fire modeling...

  7. Global analysis of ocean surface wind and wind stress using a general circulation model and Seasat scatterometer winds

    Science.gov (United States)

    Kalnay, E.; Atlas, R.

    1986-01-01

    Instantaneous and 15-day time-averaged fields of surface wind, wind stress, curl of the wind stress, and wind divergence are presented. These fields are derived from the Goddard Laboratory for Atmospheres four-dimensional analysis/forecast cycle, for the period September 6-30, 1978, using conventional data, satellite temperature soundings, cloud-track winds, and subjectively dealiased Seasat scatterometer winds.

  8. How predictable are equatorial Atlantic surface winds?

    Science.gov (United States)

    Richter, Ingo; Doi, Takeshi; Behera, Swadhin

    2017-04-01

    Sensitivity tests with the SINTEX-F general circulation model (GCM) as well as experiments from the Coupled Model Intercomparison Project phase 5 (CMIP5) are used to examine the extent to which sea-surface temperature (SST) anomalies contribute to the variability and predictability of monthly mean surface winds in the equatorial Atlantic. In the SINTEX-F experiments, a control experiment with prescribed observed SST for the period 1982-2014 is modified by inserting climatological values in certain regions, thereby eliminating SST anomalies. When SSTs are set to climatology in the tropical Atlantic only (30S to 30N), surface wind variability over the equatorial Atlantic (5S-5N) decreases by about 40% in April-May-June (AMJ). This suggests that about 60% of surface wind variability is due to either internal atmospheric variability or SSTs anomalies outside the tropical Atlantic. A further experiment with climatological SSTs in the equatorial Pacific indicates that another 10% of variability in AMJ may be due to remote influences from that basin. Experiments from the CMIP5 archive, in which climatological SSTs are prescribed globally, tend to confirm the results from SINTEX-F but show a wide spread. In some models, the equatorial Atlantic surface wind variability decreases by more than 90%, while in others it even increases. Overall, the results suggest that about 50-60% of surface wind variance in AMJ is predictable, while the rest is due to internal atmospheric variability. Other months show significantly lower predictability. The relatively strong internal variability as well as the influence of remote SSTs suggest a limited role for coupled ocean-atmosphere feedbacks in equatorial Atlantic variability.

  9. WIND STRESS AND SURFACE ROUGHNESS AT AIR-SEA INTERFACE

    Science.gov (United States)

    Based on the compiled data of thirty independent observations, the report presents the wind - stress coefficient, the surface roughness and the...boundary layer flow regime at the air-sea interface under various wind conditions. Both the wind - stress coefficient and the surface roughness are found to...data and Charnock’s proportionality constant is determined. Finally, two approximate formulae for the wind - stress coefficient, one for light wind and the other for strong wind are suggested.

  10. An overview on SAR measurements of sea surface wind

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Studies show that synthetic aperture radar (SAR) has the capability of providing high-resolution (sub-kilometer) sea surface wind fields. This is very useful for applications where knowledge of the sea surface wind at fine scales is crucial. This paper aims to review the latest work on sea surface wind field retrieval using SAR images. As shown, many different approaches have been developed for retrieving wind speed and wind direction. However, much more work will be required to fully exploit the SAR data for improving the retrieval accuracy of high-resolution winds and for producing wind products in an operational sense.

  11. QuikSCAT and SSM/I ocean surface winds for wind energy

    DEFF Research Database (Denmark)

    Hasager, Charlotte Bay; Astrup, Poul; Nielsen, Per

    2007-01-01

    Ocean surface winds observed by satellite scatterometer (QuikSCAT) and passive microwave (SMM/I) provide valuable information for wind energy applications. In wind energy two long-term aspects on the offshore wind climate is of concern. One is the 20-year average necessary for the estimation...

  12. Wind Resource Estimation using QuikSCAT Ocean Surface Winds

    DEFF Research Database (Denmark)

    Xu, Qing; Zhang, Guosheng; Cheng, Yongcun

    2011-01-01

    and the complexity of air-sea interaction processes, an empirical relationship that adjusts QuikSCAT winds in coastal waters was first proposed based on vessel measurements. Then the shape and scale parameters of Weibull function are determined for wind resource estimation. The wind roses are also plotted. Results...

  13. Deterministic prediction of surface wind speed variations

    OpenAIRE

    Drisya, G. V.; Kiplangat, D. C.; Asokan, K; K. Satheesh Kumar

    2014-01-01

    Accurate prediction of wind speed is an important aspect of various tasks related to wind energy management such as wind turbine predictive control and wind power scheduling. The most typical characteristic of wind speed data is its persistent temporal variations. Most of the techniques reported in the literature for prediction of wind speed and power are based on statistical methods or probabilistic distribution of wind speed data. In this paper we demonstrate that determin...

  14. Study of Practicability of Improved Irwin's Surface Wind Sensor

    National Research Council Canada - National Science Library

    Junji KATAGIRI; Toshio TSURUMI; Takeshi OHKUMA; Hisao MARUKAWA

    2009-01-01

      The practicability of a surface wind sensor (SWS) is examined by comparing the mean and fluctuating wind velocities obtained from this instrument with those measured by an omni-directional multi-channel anemometer (OMA...

  15. Effectiveness of WRF wind direction for retrieving coastal sea surface wind from synthetic aperture radar

    DEFF Research Database (Denmark)

    Takeyama, Yuko; Ohsawa, Teruo; Kozai, Katsutoshi;

    2013-01-01

    Wind direction is required as input to the geophysical model function (GMF) for the retrieval of sea surface wind speed from a synthetic aperture radar (SAR) images. The present study verifies the effectiveness of using the wind direction obtained from the weather research and forecasting model...

  16. Offshore Wind Energy: Wind and Sea Surface Temperature from Satellite Observations

    DEFF Research Database (Denmark)

    Karagali, Ioanna

    and the Baltic Sea. The aim is to evaluate their potential use and demonstrate their applicability within the context of offshore wind energy; for the quantication of the wind resources and for the identication of diurnal warming of the sea surface temperature. Space-borne observations of wind are obtained from...

  17. Simulation of the surface wind field and wind waves over the Oman Sea

    Science.gov (United States)

    Hamzeloo, Sima; Hadi Moeini, Mohammad; Jandaghi Alaee, Majid

    2016-04-01

    Surface wind field is one of the most important factors in the generation of the marine hydrodynamic phenomena such as wind waves that highly affected by the surface winds. Therefore, accessibility to the correct wind field is of great importance for accurate prediction and simulation of the hydrodynamic variables. Nowadays numerical mesoscale weather prediction models are widely applied as powerful tools to simulate wind and other atmospheric variables with predefined temporal and spatial resolution in desired areas. Despite appropriate results of the numerical models in many regions, there are still some complications in the simulation of the surface wind field in areas with complex orography since the surface wind field is highly affected by the local topography, land-sea discontinuity, temperature gradient etc. Nowadays, with the development of high-speed processors the third generation spectral models are generally used for simulation of wind waves. Wind data are the main input parameters of the numerical spectral wave model. Therefore, the quality of the input wind data can be assessed by comparison of the wave model outputs with measured values. The main goal of the current study is to simulate surface wind field over the Oman Sea using WRF modeling system. To verify the model results, the simulated wind speeds were compared with synoptic and buoy measurements and satellite observations. Wind-wave parameters simulated by the spectral model were also compared with wave measurements to verify simulated surface wind field as the input of the wave model. The Comparison simulated wind speed and directions in coastal synoptic stations and QuikSCAT satellite shows sufficient results for both offshore and coastal areas.

  18. On the dependence of sea surface roughness on wind waves

    DEFF Research Database (Denmark)

    Johnson, H.K.; Højstrup, J.; Vested, H.J.;

    1998-01-01

    The influence of wind waves on the momentum transfer (wind stress) between the atmosphere and sea surface was studied using new measured data from the RASEX experiment and other datasets compiled by Donelan et al. Results of the data analysis indicate that errors in wind friction velocity u...

  19. Calculating the sensitivity of wind turbine loads to wind inputs using response surfaces

    DEFF Research Database (Denmark)

    Rinker, Jennifer M.

    2016-01-01

    This paper presents a methodology to calculate wind turbine load sensitivities to turbulence parameters through the use of response surfaces. A response surface is a high-dimensional polynomial surface that can be calibrated to any set of input/output data and then used to generate synthetic data...... parameters examined in this paper, the variance caused by the Kaimal length scale and nonstationarity parameter are negligible. Thus, the findings in this paper represent the first systematic evidence that stochastic wind turbine load response statistics can be modeled purely by mean wind wind speed...

  20. Will surface winds weaken in response to global warming?

    Science.gov (United States)

    Ma, Jian; Foltz, Gregory R.; Soden, Brian J.; Huang, Gang; He, Jie; Dong, Changming

    2016-12-01

    The surface Walker and tropical tropospheric circulations have been inferred to slow down from historical observations and model projections, yet analysis of large-scale surface wind predictions is lacking. Satellite measurements of surface wind speed indicate strengthening trends averaged over the global and tropical oceans that are supported by precipitation and evaporation changes. Here we use corrected anemometer-based observations to show that the surface wind speed has not decreased in the averaged tropical oceans, despite its reduction in the region of the Walker circulation. Historical simulations and future projections for climate change also suggest a near-zero wind speed trend averaged in space, regardless of the Walker cell change. In the tropics, the sea surface temperature pattern effect acts against the large-scale circulation slow-down. For higher latitudes, the surface winds shift poleward along with the eddy-driven mid-latitude westerlies, resulting in a very small contribution to the global change in surface wind speed. Despite its importance for surface wind speed change, the influence of the SST pattern change on global-mean rainfall is insignificant since it cannot substantially alter the global energy balance. As a result, the precipitation response to global warming remains ‘muted’ relative to atmospheric moisture increase. Our results therefore show consistency between projections and observations of surface winds and precipitation.

  1. Deterministic prediction of surface wind speed variations

    Science.gov (United States)

    Drisya, G. V.; Kiplangat, D. C.; Asokan, K.; Satheesh Kumar, K.

    2014-11-01

    Accurate prediction of wind speed is an important aspect of various tasks related to wind energy management such as wind turbine predictive control and wind power scheduling. The most typical characteristic of wind speed data is its persistent temporal variations. Most of the techniques reported in the literature for prediction of wind speed and power are based on statistical methods or probabilistic distribution of wind speed data. In this paper we demonstrate that deterministic forecasting methods can make accurate short-term predictions of wind speed using past data, at locations where the wind dynamics exhibit chaotic behaviour. The predictions are remarkably accurate up to 1 h with a normalised RMSE (root mean square error) of less than 0.02 and reasonably accurate up to 3 h with an error of less than 0.06. Repeated application of these methods at 234 different geographical locations for predicting wind speeds at 30-day intervals for 3 years reveals that the accuracy of prediction is more or less the same across all locations and time periods. Comparison of the results with f-ARIMA model predictions shows that the deterministic models with suitable parameters are capable of returning improved prediction accuracy and capturing the dynamical variations of the actual time series more faithfully. These methods are simple and computationally efficient and require only records of past data for making short-term wind speed forecasts within practically tolerable margin of errors.

  2. Offshore Wind Energy: Wind and Sea Surface Temperature from Satellite Observations

    DEFF Research Database (Denmark)

    Karagali, Ioanna

    as the entire atmosphere above. Under conditions of light winds and strong solar insolation, warming of the upper oceanic layer may occur. In this PhD study, remote sensing from satellites is used to obtain information for the near-surface ocean wind and the sea surface temperature over the North Sea...

  3. Altimeter Estimation of Sea Surface Wind Stress for Light to Moderate Winds

    Science.gov (United States)

    Vandemark, Douglas; Edson, James B.; Chapron, Bertrand

    1997-01-01

    Aircraft altimeter and in situ measurements are used to examine relationships between altimeter backscatter and the magnitude of near-surface wind and friction velocities. Comparison of altimeter radar cross section with wind speed is made through the modified Chelton-Wentz algorithm. Improved agreement is found after correcting 10-m winds for both surface current and atmospheric stability. An altimeter friction velocity algorithm is derived based on the wind speed model and an open-ocean drag coefficient. Close agreement between altimeter- and in situ-derived friction velocities is found. For this dataset, quality of the altimeter inversion to surface friction velocity is comparable to that for adjusted winds and clearly better than the inversion to true 10-m wind speed.

  4. Wind flow and wind loads on the surface of a tower- shaped building: Numerical simulations and wind tunnel experiment

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Flow structure and wind pressure distribution caused by obtuse obstacles are usually the focuses in Computational Wind Engineer researches (CWE). By solving the non- hydrostatical dynamic equations, PUMA model (Peking University Model of Atmospheric Environment) was developed and applied to simulating the flow structure and wind pressure distribution around a tower-shaped building. Evaluation about the wind environment and wind loads around the building was obtained through the analysis of the numerical simulation results and wind tunnel data. Comparisons between the simulation and wind tunnel study indicate that numerical simulation results agree well in the flow field and wind pressure distribution around the tower-shaped building. On the other hand, the horizontal grid interval of 2 m and the vertical grid of 3 m were still too crude to simulate the flow structure and wind pressure distribution on the building surface more exactly in detail; and the absence of suitable pressure perturbation parameterization scheme between the solid and the adjacent space also limits the accuracy of the numerical simulation. The numerical simulation model can be used to evaluate the wind environment and wind load around high buildings.

  5. Impacts of wind farms on surface air temperatures

    Science.gov (United States)

    Baidya Roy, Somnath; Traiteur, Justin J.

    2010-01-01

    Utility-scale large wind farms are rapidly growing in size and numbers all over the world. Data from a meteorological field campaign show that such wind farms can significantly affect near-surface air temperatures. These effects result from enhanced vertical mixing due to turbulence generated by wind turbine rotors. The impacts of wind farms on local weather can be minimized by changing rotor design or by siting wind farms in regions with high natural turbulence. Using a 25-y-long climate dataset, we identified such regions in the world. Many of these regions, such as the Midwest and Great Plains in the United States, are also rich in wind resources, making them ideal candidates for low-impact wind farms. PMID:20921371

  6. Interpretation of nonlinearity in wind generated ocean surface waves

    Digital Repository Service at National Institute of Oceanography (India)

    Varkey, M.J.

    This study attempts to resolve a mix-up between a physical process and its mathematical interpretation in the context of wind waves on ocean surface. Wind generated wave systems, are conventionally interpreted as a result of interaction of a number...

  7. Widespread land surface wind decline in the Northern Hemisphere

    Science.gov (United States)

    Vautard, R.; Cattiaux, J.; Yiou, P.; Thépaut, J.-N.; Ciais, P.

    2010-09-01

    The decline of surface wind observed in many regions of the world is a potential source of concern for wind power electricity generation. It is also suggested as the main cause of decreasing pan evaporation. In China, a persistent and significant decrease of monsoon winds was observed in all seasons. Surface wind declines were also evidenced in several regions of the world (U.S., Australia, several European countries). Except over China, no clear explanation was given for the wind decrease in the regions studied. Whether surface winds decrease is due to changes in the global atmospheric circulation or its variability, in surface processes or to observational trends has therefore not been elucidated. The identification of the drivers of such a decline requires a global investigation of available surface and upper-air wind data, which has not been conducted so far. Here we use global datasets of in-situ wind measurements that contain surface weather stations wind data (hourly or three-hourly data acquisition time step) and rawinsonde vertical wind data profiles (monthly time step) prepared by the NCAR. A set of 822 worldwide surface stations with continuous wind records was selected after a careful elimination of stations with obvious breaks and large gaps. This dataset mostly covers the Northern mid latitudes over the period 1979-2008. Using this data set, we found that annual mean wind speeds have declined at 73% of the surface stations over the past 30 years. In the Northern Hemisphere, positive wind trends are found only in a few places. In Europe, Central Asia, Eastern Asia and in North America the annual mean surface wind speed has decreased on average at a rate of -2.9, -5.9, -4.2, and -1.8 %/decade respectively, i.e. a decrease of about 10% in 30 years and up to about 20% in Central Asia. These results are robust to changes in the station selection method and parameters. By contrast, upper-air winds observed from rawinsondes, geostrophic winds deduced from

  8. Global ocean wind power sensitivity to surface layer stability

    Science.gov (United States)

    Capps, Scott B.; Zender, Charles S.

    2009-05-01

    Global ocean wind power has recently been assessed (W. T. Liu et al., 2008) using scatterometry-based 10 m winds. We characterize, for the first time, wind power at 80 m (typical wind turbine hub height) above the global ocean surface, and account for the effects of surface layer stability. Accounting for realistic turbine height and atmospheric stability increases mean global ocean wind power by +58% and -4%, respectively. Our best estimate of mean global ocean wind power is 731 W m-2, about 50% greater than the 487 W m-2 based on previous methods. 80 m wind power is 1.2-1.5 times 10 m power equatorward of 30° latitude, between 1.4 and 1.7 times 10 m power in wintertime storm track regions and >6 times 10 m power in stable regimes east of continents. These results are relatively insensitive to methodology as wind power calculated using a fitted Weibull probability density function is within 10% of power calculated from discrete wind speed measurements over most of the global oceans.

  9. OW ASCAT Ocean Surface Winds - 2-Day Composites

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Advanced Scatterometer (ASCAT) sensor onboard the EUMETSAT MetOp polar-orbiting satellite provides ocean surface wind observations by means of radar...

  10. Effect of film slicks on near-surface wind

    Science.gov (United States)

    Charnotskii, Mikhail; Ermakov, Stanislav; Ostrovsky, Lev; Shomina, Olga

    2016-09-01

    The transient effects of horizontal variation of sea-surface wave roughness due to surfactant films on near-surface turbulent wind are studied theoretically and experimentally. Here we suggest two practical schemes for calculating variations of wind velocity profiles near the water surface, the average short-wave roughness of which is varying in space and time when a film slick is present. The schemes are based on a generalized two-layer model of turbulent air flow over a rough surface and on the solution of the continuous model involving the equation for turbulent kinetic energy of the air flow. Wave tank studies of wind flow over wind waves in the presence of film slicks are described and compared with theory.

  11. The near-surface wind field over the Antarctic continent

    Science.gov (United States)

    van Lipzig, N. P. M.; Turner, J.; Colwell, S. R.; van den Broeke, M. R.

    2004-12-01

    A 14 year integration with a regional atmospheric model has been used to determine the near-surface climatological wind field over the Antarctic ice sheet at a horizontal grid spacing of 55 km. Previous maps of the near-surface wind field were generally based on models ignoring the large-scale pressure-gradient forcing term in the momentum equation. Presently, state-of-the-art atmospheric models include all pressure-gradient forcing terms. Evaluation of our model output against in situ data shows that the model is able to represent realistically the observed increase in wind speed going from the interior to the coast, as well as the observed wind direction at South Pole and Dumont d'Urville and the bimodal wind distribution at Halley.

  12. Wind Characteristics of Coastal and Inland Surface Flows

    Science.gov (United States)

    Subramanian, Chelakara; Lazarus, Steven; Jin, Tetsuya

    2015-11-01

    Lidar measurements of the winds in the surface layer (up to 80 m) inland and near the beach are studied to better characterize the velocity profile and the effect of roughness. Mean and root-mean-squared profiles of horizontal and vertical wind components are analyzed. The effects of variable time (18, 60 and 600 seconds) averaging on the above profiles are discussed. The validity of common surface layer wind profile models to estimate skin friction drag is assessed in light of these measurements. Other turbulence statistics such as auto- and cross- correlations in spatial and temporal domains are also presented. The help of FIT DMES field measurement crew is acknowledged.

  13. Characterizing Tropospheric Winds by Combining MISR Cloud-Track and QuikSCAT Surface Wind Vectors

    Science.gov (United States)

    Davies, R.; Garay, M. J.; Moroney, C. M.; Liu, W. T.

    2007-12-01

    Numerous studies have found that the inclusion of wind observations results in a significantly greater improvement in operational weather forecasts compared to the addition of temperature or pressure observations alone. However, global tropospheric wind measurements are only available from 12-hourly rawinsonde launches from selected locations, primarily over land. For years the world's oceans were "data voids" in terms of wind measurements. Only recently have satellites begun to fill this gap. The SeaWinds scatterometer on the QuikSCAT satellite obtains winds referenced to 10 meters above the surface over the global oceans under nearly all weather conditions. The wind speed and direction data from QuikSCAT have been extensively tested against surface observations and are of such quality that these data are routinely assimilated into numerical weather prediction models run by both the National Center for Environmental Prediction (NCEP) and the European Centre for Medium Range Weather Forecasting (ECMWF). However, scatterometer data only provide wind information near the ocean surface. This information can be complemented with satellite cloud-track winds that provide information about winds in the free troposphere over the ocean, as well as over land, where scatterometer data are not available. In particular, the height resolved cloud motion vectors from the Multi-angle Imaging SpectroRadiometer (MISR) instrument on the NASA EOS Terra satellite yield wind speeds for clouds at altitudes less than approximately 2.5 km that are shown to compare favorably with the QuikSCAT winds globally. In addition, the direction of the MISR winds is similar to the QuikSCAT wind vectors when compared on the same basis. The synergistic use of these two sets of wind observations has the potential to make possible a variety of new studies: from improved forecast and climate model validation; to increased understanding of tropospheric water vapor transport; to observations of the coupling

  14. Ocean Surface Wind Speed of Hurricane Helene Observed by SAR

    DEFF Research Database (Denmark)

    Xu, Qing; Cheng, Yongcun; Li, Xiaofeng

    2011-01-01

    The hurricanes can be detected by many remote sensors, but synthetic aperture radar (SAR) can yield high-resolution (sub-kilometer) and low-level wind information that cannot be seen below the cloud by other sensors. In this paper, an assessment of SAR capability of monitoring high-resolution hur......The hurricanes can be detected by many remote sensors, but synthetic aperture radar (SAR) can yield high-resolution (sub-kilometer) and low-level wind information that cannot be seen below the cloud by other sensors. In this paper, an assessment of SAR capability of monitoring high......-resolution hurricane was conducted. A case study was carried out to retrieve ocean surface wind field from C-band RADARSAT-1 SAR image which captured the structure of hurricane Helene over the Atlantic Ocean on 20 September, 2006. With wind direction from the outputs of U.S. Navy Operational Global Atmospheric...... CIWRAP models have been tested to extract wind speed from SAR data. The SAR retrieved ocean surface winds were compared to the aircraft wind speed observations from stepped frequency microwave radiometer (SFMR). The results show the capability of hurricane wind monitoring by SAR....

  15. Surface wind energy trends near Taiwan in winter since 1871

    Directory of Open Access Journals (Sweden)

    Lei Zhang

    2017-01-01

    Full Text Available The tropical surface wind speed in boreal winter reaches a maximum near Taiwan. This stable wind resource may be used for future clean energy development. How this surface wind energy source has changed in past 141 years is investigated using the 20th century reanalysis dataset and CMIP5 models. Our observational analysis shows that the surface wind speed experienced a weakening trend in the past 141 years (1871 - 2010. The average decreasing rate is around -1.4 m s-1 per century. The decrease is primarily attributed to the relative sea surface temperature (SST cooling in the subtropical North Pacific, which forces a large-scale low-level anti-cyclonic circulation anomaly in situ and is thus responsible for the southerly trend near Taiwan. The relative SST trend pattern is attributed mainly to the greenhouse gas effect associated with anthropogenic activities. The southerly trend near Taiwan is more pronounced in the boreal winter than in summer. Such seasonal difference is attributed to the reversed seasonal mean wind, which promotes more efficient positive feedback in the boreal winter. The CMIP5 historical run analysis reveals that climate models capture less SST warming and large-scale anti-cyclonic circulation in the subtropical North Pacific, but the simulated weakening trend of the surface wind speed near Taiwan is too small.

  16. The Character of the Solar Wind, Surface Interactions, and Water

    Science.gov (United States)

    Farrell, William M.

    2011-01-01

    We discuss the key characteristics of the proton-rich solar wind and describe how it may interact with the lunar surface. We suggest that solar wind can be both a source and loss of water/OH related volatiles, and review models showing both possibilities. Energy from the Sun in the form of radiation and solar wind plasma are in constant interaction with the lunar surface. As such, there is a solar-lunar energy connection, where solar energy and matter are continually bombarding the lunar surface, acting at the largest scale to erode the surface at 0.2 Angstroms per year via ion sputtering [1]. Figure 1 illustrates this dynamically Sun-Moon system.

  17. Surface Currents and Winds at the Delaware Bay Mouth

    Energy Technology Data Exchange (ETDEWEB)

    Muscarella, P A; Barton, N P; Lipphardt, B L; Veron, D E; Wong, K C; Kirwan, A D

    2011-04-06

    Knowledge of the circulation of estuaries and adjacent shelf waters has relied on hydrographic measurements, moorings, and local wind observations usually removed from the region of interest. Although these observations are certainly sufficient to identify major characteristics, they lack both spatial resolution and temporal coverage. High resolution synoptic observations are required to identify important coastal processes at smaller scales. Long observation periods are needed to properly sample low-frequency processes that may also be important. The introduction of high-frequency (HF) radar measurements and regional wind models for coastal studies is changing this situation. Here we analyze synoptic, high-resolution surface winds and currents in the Delaware Bay mouth over an eight-month period (October 2007 through May 2008). The surface currents were measured by two high-frequency radars while the surface winds were extracted from a data-assimilating regional wind model. To illustrate the utility of these monitoring tools we focus on two 45-day periods which previously were shown to present contrasting pictures of the circulation. One, the low-outflow period is from 1 October through 14 November 2007; the other is the high-outflow period from 3 March through 16 April 2008. The large-scale characteristics noted by previous workers are clearly corroborated. Specifically the M2 tide dominates the surface currents, and the Delaware Bay outflow plume is clearly evident in the low frequency currents. Several new aspects of the surface circulation were also identified. These include a map of the spatial variability of the M2 tide (validating an earlier model study), persistent low-frequency cross-mouth flow, and a rapid response of the surface currents to a changing wind field. However, strong wind episodes did not persist long enough to set up a sustained Ekman response.

  18. Assessment of Wind Turbine Structural Integrity using Response Surface Methodology

    DEFF Research Database (Denmark)

    Toft, Henrik Stensgaard; Svenningsen, Lasse; Moser, Wolfgang

    2016-01-01

    Highlights •A new approach to assessment of site specific wind turbine loads is proposed. •The approach can be applied in both fatigue and ultimate limit state. •Two different response surface methodologies have been investigated. •The model uncertainty introduced by the response surfaces is dete...

  19. Dominant patterns of winter Arctic surface wind variability

    Institute of Scientific and Technical Information of China (English)

    WU Bingyi; John Walsh; LIU Jiping; ZHANG Xiangdong

    2014-01-01

    Dominant statistical patterns of winter Arctic surface wind (WASW) variability and their impacts on Arctic sea ice motion are investigated using the complex vector empirical orthogonal function (CVEOF) method. The results indicate that the leading CVEOF of Arctic surface wind variability, which accounts for 33% of the covariance, is characterized by two different and alternating spatial patterns (WASWP1 and WASWP2). Both WASWP1 and WASWP2 show strong interannual and decadal variations, superposed on their declining trends over past decades. Atmospheric circulation anomalies associated with WASWP1 and WASWP2 exhibit, respectively, equivalent barotropic and some baroclinic characteristics, differing from the Arctic dipole anomaly and the seesaw structure anomaly between the Barents Sea and the Beaufort Sea. On decadal time scales, the decline trend of WASWP2 can be attributed to persistent warming of sea surface temperature in the Greenland—Barents—Kara seas from autumn to winter, relfecting the effect of the Arctic warming. The second CVEOF, which accounts for 18% of the covariance, also contains two different spatial patterns (WASWP3 and WASWP4). Their time evolutions are signiifcantly correlated with the North Atlantic Oscillation (NAO) index and the central Arctic Pattern, respectively, measured by the leading EOF of winter sea level pressure (SLP) north of 70°N. Thus, winter anomalous surface wind pattern associated with the NAO is not the most important surface wind pattern. WASWP3 and WASWP4 primarily relfect natural variability of winter surface wind and neither exhibits an apparent trend that differs from WASWP1 or WASWP2. These dominant surface wind patterns strongly inlfuence Arctic sea ice motion and sea ice exchange between the western and eastern Arctic. Furthermore, the Fram Strait sea ice volume lfux is only signiifcantly correlated with WASWP3. The results demonstrate that surface and geostrophic winds are not interchangeable in terms of

  20. The Dynamic Stiffness of Surface Footings for Offshore Wind Turbines

    DEFF Research Database (Denmark)

    Vahdatirad, Mohammadjavad; Andersen, Lars; Clausen, Johan;

    2011-01-01

    This study concerns the dynamic stiffness of foundations for large offshore wind turbines. Especially, the purpose of the analysis is to quantify the uncertainties related to the first natural frequency of a turbine supported by a surface footing on layered soil. The dynamic properties...... due to sediment transportation. Further, the stiffness and density of the materials within a single layer is subject to uncertainties. This leads to uncertainties of the dynamic stiffness of the foundation and therefore the natural frequencies. The aim of the study is to quantify the level...... of uncertainties and discuss the utilization of reliability-based design of surface footings for wind turbines....

  1. Effects of surface wind speed decline on hydrology in China

    Science.gov (United States)

    Liu, X.; Zhang, X.; Tang, Q.; Zhang, X.

    2013-12-01

    Surface wind speed decline in China has been widely reported, but its effects on hydrology have not been fully evaluated to date. In this study, we evaluate the effects of wind speed decline on hydrology in China during 1966-2011 by using the Variable Infiltration Capacity (VIC) hydrological model. Two model experiments, i.e. VIC simulations with the observed (EXP1) and detrended wind speed (EXP2), are performed in the major river basins in China. The differences between the two experiments are analyzed to assess the effects of wind speed decline on hydrology. Results show that wind speed has decreased by 29% of its mean in China, even by 80% for some areas in the northern China. The wind speed decline have resulted in a decrease of evapotranspiration by 1-3% of mean annual evapotranspiration and an increase of runoff by 1-6% of mean annual runoff at most basins in China. The effect of wind speed on runoff and soil moisture is large in the northern basins where small change in hydrological conditions would have significant implications for water management. In addition, Wind speed decline has offset the expansion of the drought area in China. It has contributed to a reduction of drought areas by 21%, 17%, 15% and 12% for the mean drought area in the Songhuajiang River, Hai River, Liao River and Yellow River basins, respectively, and by 8.8% of the mean drought area over China. The effect of wind speed decline on soil moisture drought is large in most basins in China expect for the Southwest and Pearl River basins.

  2. Low-Frequency Rotation of Surface Winds over Canada

    Directory of Open Access Journals (Sweden)

    Richard B. Richardson

    2012-10-01

    Full Text Available Hourly surface observations from the Canadian Weather Energy and Engineering Dataset were analyzed with respect to long-term wind direction drift or rotation. Most of the Canadian landmass, including the High Arctic, exhibits a spatially consistent and remarkably steady anticyclonic rotation of wind direction. The period of anticyclonic rotation recorded at 144 out of 149 Canadian meteostations directly correlated with latitude and ranged from 7 days at Medicine Hat (50°N, 110°W to 25 days at Resolute (75°N, 95°W. Only five locations in the vicinity of the Rocky Mountains and Pacific Coast were found to obey a “negative” (i.e., cyclonic rotation. The observed anticyclonic rotation appears to be a deterministic, virtually ubiquitous, and highly persistent feature of continental surface wind. These findings are directly applicable to probabilistic assessments of airborne pollutants.

  3. Determining Land-Surface Parameters from the ERS Wind Scatterometer

    NARCIS (Netherlands)

    Woodhouse, I.H.; Hoekman, D.H.

    2000-01-01

    The ERS-1 wind scatterometer (WSC) has a resolution cell of about 50 km but provides a high repetition rate (less than four days) and makes measurements at multiple incidence angles. In order to retrieve quantitative geophysical parameters over land surfaces using this instrument, a method is presen

  4. The Influence of Wind on HF Radar Surface Current Forecasts

    Science.gov (United States)

    2008-12-01

    9 1. Ekman , 1905 .........................................................................................9 2. McNally, Luther and...x THIS PAGE INTENTIONALLY LEFT BLANK xi LIST OF FIGURES Figure 1. Ekman Spiral. – The angle between the wind and the surface current is 45º... Paul Jessen Terry Rago Superv. Gen. Eng. Robert Wyland I also appreciate the Oceanography and Meteorology/Oceanography students

  5. Widespread land surface wind decline in the Northern Hemisphere partly attributed to land surface changes

    Science.gov (United States)

    Thepaut, J.; Vautard, R.; Cattiaux, J.; Yiou, P.; Ciais, P.

    2010-12-01

    The decline of surface wind observed in many regions of the world is a potential source of concern for wind power electricity generation. It is also suggested as the main cause of decreasing pan evaporation. In China, a persistent and significant decrease of monsoon winds was observed in all seasons. Surface wind declines were also evidenced in several regions of the world (U.S., Australia, several European countries). Except over China, no clear explanation was given for the wind decrease in the regions studied. Whether surface winds decrease is due to changes in the global atmospheric circulation or its variability, in surface processes or to observational trends has therefore not been elucidated. The identification of the drivers of such a decline requires a global investigation of available surface and upper-air wind data, which has not been conducted so far. Here we use global datasets of in-situ wind measurements that contain surface weather stations wind data (hourly or three-hourly data acquisition time step) and rawinsonde vertical wind data profiles (monthly time step) prepared by the NCAR. A set of 822 worldwide surface stations with continuous wind records was selected after a careful elimination of stations with obvious breaks and large gaps. This dataset mostly covers the Northern mid latitudes over the period 1979-2008. Using this data set, we found that annual mean wind speeds have declined at 73% of the surface stations over the past 30 years. In the Northern Hemisphere, positive wind trends are found only in a few places. In Europe, Central Asia, Eastern Asia and in North America the annual mean surface wind speed has decreased on average at a rate of -2.9, -5.9, -4.2, and -1.8 %/decade respectively, i.e. a decrease of about 10% in 30 years and up to about 20% in Central Asia. These results are robust to changes in the station selection method and parameters. By contrast, upper-air winds observed from rawinsondes, geostrophic winds deduced from

  6. Wind-Speed—Surface-Heat-Flux Feedback in Dust Devils

    Science.gov (United States)

    Ito, Junshi; Niino, Hiroshi

    2016-06-01

    Strong winds associated with dust devils can induce locally large heat fluxes from the surface, and resulting enhanced buoyancy may further intensify the dust devils. This positive wind—surface-heat-flux feedback is studied using a large-eddy simulation of a convective boundary layer. A comparison of the results with and without the feedback process for the same environment demonstrates the significance of the feedback process for simulated dust devils.

  7. Blended 6-Hourly Sea Surface Wind Vectors and Wind Stress on a Global 0.25 Degree Grid (1987-2011)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Blended Global Sea Surface Winds products contain ocean surface wind vectors and wind stress on a global 0.25 degree grid, in multiple time resolutions of...

  8. Near-nadir microwave specular returns from the sea surface - Altimeter algorithms for wind and wind stress

    Science.gov (United States)

    Wu, Jin

    1992-01-01

    Two approaches have been adopted to construct altimeter wind algorithms: one is based on the mean-square sea surface slope, and the other is based on the Seasat scatterometer wind. Both types of algorithms are critically reviewed with respect to the mechanism governing near-nadir sea returns and the comparison between altimeter and buoy winds. A new algorithm is proposed; it is deduced on the basis of microwave specular reflection and is finely tuned with buoy-measured winds. On the basis of this algorithm and the formula of the wind-stress coefficient, a simple wind-stress algorithm is also proposed.

  9. Spatial development of the wind-driven water surface flow

    Science.gov (United States)

    Chemin, Rémi; Caulliez, Guillemette

    2015-04-01

    The water velocity field induced by wind and waves beneath an air-water interface is investigated experimentally versus fetch in the large Marseille-Luminy wind wave tank. Measurements of the vertical velocity profiles inside the subsurface shear layer were performed by a three-component Nortek acoustic Doppler velocimeter. The surface drift current was also derived from visualizations of small floating drifters recorded by a video camera looking vertically from above the water surface. Surface wave height and slopes were determined simultaneously by means of capacitance gauges and a single-point laser slope system located in the immediate vicinity of the profiler. Observations were made at steady low to moderate wind speeds and various fetches ranging between 1 and 15 meters. This study first corroborates that the thin subsurface water boundary layer forced by wind at the leading edge of the water sheet is laminar. The surface drift current velocity indeed increases gradually with fetch, following a 1/3 power law characteristic of an accelerated flat-plate laminar boundary layer. The laminar-turbulent transition manifests itself by a sudden decrease in the water surface flow velocity and a rapid deepening of the boundary layer due to the development of large-scale longitudinal vortices. Further downstream, when characteristic capillary-gravity wind waves develop at the surface, the water flow velocity increases again rapidly within a sublayer of typically 4 mm depth. This phenomenon is explained by the occurrence of an intense momentum flux from waves to the mean flow due to the dissipation of parasitic capillaries generated ahead of the dominant wave crests. This phenomenon also sustains significant small-scale turbulent motions within the whole boundary layer. However, when gravity-capillary waves of length longer than 10 cm then grow at the water surface, the mean flow velocity field decreases drastically over the whole boundary layer thickness. At the same

  10. Influence of surface stressing on stellar coronae and winds

    CERN Document Server

    Jardine, M; van Ballegooijen, A; Donati, J -F; Morin, J; Fares, R; Gombosi, T I

    2013-01-01

    The large-scale field of the Sun is well represented by its lowest energy (or potential) state. Recent observations, by comparison, reveal that many solar-type stars show large-scale surface magnetic fields that are highly non-potential - that is, they have been stressed above their lowest-energy state. This non-potential component of the surface field is neglected by current stellar wind models. The aim of this paper is to determine its effect on the coronal structure and wind. We use Zeeman-Doppler surface magnetograms of two stars - one with an almost potential, one with a non-potential surface field - to extrapolate a static model of the coronal structure for each star. We find that the stresses are carried almost exclusively in a band of uni-directional azimuthal field that is confined to mid-latitudes. Using this static solution as an initial state for an MHD wind model, we then find that the final state is determined primarily by the potential component of the surface magnetic field. The band of azimut...

  11. Fine-measuring technique and application for sea surface wind by mobile Doppler wind lidar

    Science.gov (United States)

    Liu, Zhishen; Wang, Zhangjun; Wu, Songhua; Liu, Bingyi; Li, Zhigang; Zhang, Xin; Bi, Decang; Chen, Yubao; Li, Rongzhong; Yang, Yuqiang

    2009-06-01

    The Key Laboratory of Ocean Remote Sensing of the Ministry of Education of China, Ocean University of China, has developed the first mobile Doppler wind lidar in China. As an important component of meteorological services for the Good Luck Beijing 2007 Qingdao International Regatta, the mobile Doppler wind lidar was used to measure the sea surface wind (SSW) with 100 m*100 m spatial and 10-min temporal resolution in Qingdao from 15 to 23 August 2007. We present the results from two aspects of this campaign. First, the lidar was operated in the fixed-direction mode and compared to SSW simultaneously measured by a collocated buoy. Second, we present lidar wind measurements throughout the regatta and show good agreement with the match situation of the International Regatta. In addition, we present a case study, accounting for the observation of sailboats stopped by the headwind. With considerable data accumulated, we have shown that the mobile Doppler wind lidar can indeed provide near real-time SSW in support of the sailing games. The lidar has also provided meteorological services for the 2008 Olympic sailing games from 8 to 22 August and Paralympics Sailing Games from 8 to 13 September 2008 in Qingdao.

  12. Deterministic nature of the underlying dynamics of surface wind fluctuations

    Directory of Open Access Journals (Sweden)

    R. C. Sreelekshmi

    2012-10-01

    Full Text Available Modelling the fluctuations of the Earth's surface wind has a significant role in understanding the dynamics of atmosphere besides its impact on various fields ranging from agriculture to structural engineering. Most of the studies on the modelling and prediction of wind speed and power reported in the literature are based on statistical methods or the probabilistic distribution of the wind speed data. In this paper we investigate the suitability of a deterministic model to represent the wind speed fluctuations by employing tools of nonlinear dynamics. We have carried out a detailed nonlinear time series analysis of the daily mean wind speed data measured at Thiruvananthapuram (8.483° N,76.950° E from 2000 to 2010. The results of the analysis strongly suggest that the underlying dynamics is deterministic, low-dimensional and chaotic suggesting the possibility of accurate short-term prediction. As most of the chaotic systems are confined to laboratories, this is another example of a naturally occurring time series showing chaotic behaviour.

  13. Deterministic nature of the underlying dynamics of surface wind fluctuations

    Science.gov (United States)

    Sreelekshmi, R. C.; Asokan, K.; Satheesh Kumar, K.

    2012-10-01

    Modelling the fluctuations of the Earth's surface wind has a significant role in understanding the dynamics of atmosphere besides its impact on various fields ranging from agriculture to structural engineering. Most of the studies on the modelling and prediction of wind speed and power reported in the literature are based on statistical methods or the probabilistic distribution of the wind speed data. In this paper we investigate the suitability of a deterministic model to represent the wind speed fluctuations by employing tools of nonlinear dynamics. We have carried out a detailed nonlinear time series analysis of the daily mean wind speed data measured at Thiruvananthapuram (8.483° N,76.950° E) from 2000 to 2010. The results of the analysis strongly suggest that the underlying dynamics is deterministic, low-dimensional and chaotic suggesting the possibility of accurate short-term prediction. As most of the chaotic systems are confined to laboratories, this is another example of a naturally occurring time series showing chaotic behaviour.

  14. Retrieval algorithm of sea surface wind vectors for WindSat based on a simple forward model

    Institute of Scientific and Technical Information of China (English)

    ZHAO Yili

    2013-01-01

    WindSat/Coriolis is the first satellite-borne polarimetric microwave radiometer,which aims to improve the potential of polarimetric microwave radiometry for measuring sea surface wind vectors from space.In this paper,a wind vector retrieval algorithm based on a novel and simple forward model was developed for WindSat.The retrieval algorithm of sea surface wind speed was developed using multiple linear regression based on the simulation dataset of the novel forward model.Sea surface wind directions that minimize the difference between simulated and measured values of the third and fourth Stokes parameters were found using maximum likelihood estimation,by which a group of ambiguous wind directions was obtained.A median filter was then used to remove ambiguity of wind direction.Evaluated with sea surface wind speed and direction data from the U.S.National Data Buoy Center (NDBC),root mean square errors are 1.2 m/s and 30° for retrieved wind speed and wind direction,respectively.The evaluation results suggest that the simple forward model and the retrieval algorithm are practicable for near-real time applications,without reducing accuracy.

  15. Auto-correlation analysis of ocean surface wind vectors

    Indian Academy of Sciences (India)

    Abhijit Sarkar; Sujit Basu; A K Varma; Jignesh Kshatriya

    2002-09-01

    The nature of the inherent temporal variability of surface winds is analyzed by comparison of winds obtained through different measurement methods. In this work, an auto-correlation analysis of a time series data of surface winds measured in situ by a deep water buoy in the Indian Ocean has been carried out. Hourly time series data available for 240 hours in the month of May, 1999 were subjected to an auto-correlation analysis. The analysis indicates an exponential fall of the auto- correlation in the first few hours with a decorrelation time scale of about 6 hours. For a meaningful comparison between satellite derived products and in situ data, satellite data acquired at different time intervals should be used with appropriate `weights', rather than treating the data as concurrent in time. This paper presents a scheme for temporal weighting using the auto-correlation analysis. These temporal `weights' can potentially improve the root mean square (rms) deviation between satellite and in situ measurements. A case study using the TRMM Microwave Imager (TMI) and Indian Ocean buoy wind speed data resulted in an improvement of about 10%.

  16. On the onset of surface wind drift at short fetches as observed in a wind wave flume

    Science.gov (United States)

    Ocampo-Torres, Francisco J.; Branger, Hubert; Osuna, Pedro; Robles, Lucia

    2014-05-01

    Ocean surface drift is of great relevance to properly model wind waves and specially the early stages of surface waves development and ocean-atmosphere fluxes during incipient wind events and storms. In particular, wave models are not so accurate predicting wave behaviour at short fetches, where wind drift onset might be very important. The onset of surface drift induced by wind and waves is being studied through detailed laboratory measurements in a large wind-wave flume. Wind stress over the water surface, waves and surface drift are measured in the 40m long wind-wave tank at IRPHE, Marseille. While momentum fluxes are estimated directly through the eddy correlation method in a station about the middle of the tank, they provide reference information to the corresponding surface drift onset recorded at rather short non-dimensional fetches. At each experimental run very low wind was on (about 1m/s) for a certain period and suddenly it was constantly accelerated to reach about 13 m/s (as well as 8 and 5 m/s during different runs) in about 15 sec to as long as 600 sec. The wind was kept constant at that high speed for 2 to 10 min, and then suddenly and constantly decelerate to 0. Surface drift values were up to 0.5 cm/s for the highest wind while very distinctive shear was detected in the upper 1.5 cm. Rather linear variation of surface drift was observed with depth. Evolution of the surface drift velocity is analysed and onset behaviour is addressed with particular emphasis in accelerated winds. This work represents a RugDiSMar Project (CONACYT 155793) contribution. The support from ANUIES-ECOS M09-U01 project, CONACYT-187112 Estancia Sabática, and Institute Carnot, is greatly acknowledged.

  17. Indian Ocean surface winds from NCMRWF analysis as compared to QuikSCAT and moored buoy winds

    Indian Academy of Sciences (India)

    B N Goswami; E N Rajagopal

    2003-03-01

    The quality of the surface wind analysis at the National Centre for Medium Range Weather Forecasts (NCMRWF), New Delhi over the tropical Indian Ocean and its improvement in 2001 are examined by comparing it with in situ buoy measurements and satellite derived surface winds from NASA QuikSCAT satellite (QSCT) during 1999, 2000 and 2001. The NCMRWF surface winds su ered from easterly bias of 1.0-1.5 ms-1 in the equatorial Indian Ocean (IO) and northerly bias of 2.0-3.0 ms-1 in the south equatorial IO during 1999 and 2000 compared to QSCT winds. The amplitude of daily variability was also underestimated compared to that in QSCT. In particular, the amplitude of daily variability of NCMRWF winds in the eastern equatorial IO was only about 60% of that of QSCT during 1999 and 2000. The NCMRWF surface winds during 2001 have significantly improved with the bias of the mean analyzed winds considerably reduced everywhere bringing it to within 0.5 ms-1 of QSCT winds in the equatorial IO. The amplitude and phase of daily and intraseasonal variability are very close to that in QSCT almost everywhere during 2001. It is shown that the weakness in the surface wind analysis during 1999 and 2000 and its improvement in 2001 are related to the weakness in simulation of precipitation by the forecast model in the equatorial IO and its improvement in 2001.

  18. Impact of Air Pollution on Summer Surface Winds in Xi'an

    Institute of Scientific and Technical Information of China (English)

    杨新; 董文杰; 刘芳霞

    2011-01-01

    By analysis of observation data,this paper demonstrates that pollution particles could reduce surface wind speed through blocking solar radiation to the ground.The comparation between temperature at the lowland meteorological station Xi'an and that over the nearby highland station Mt.Hun suggests that surface solar radiation at Xi'an is reduced due to the increasing anthropogenic aerosols.The reduced surface energy suppresses the atmospheric instability and convective flows,and thus the downward transfer of faster winds aloft is reduced.Consequently,wind speeds near surface are weakened.This reduction of surface winds is shown by the significant reverse trends of wind speeds over the two stations at different elevations.The aerosols' effects on winds are also manifested in the trends of radionsonde wind speed.The decreased surface winds in Xi'an have also reduced local pan evaporation.

  19. Features of wind field over the sea surface in the coastal area

    Science.gov (United States)

    Monzikova, A. K.; Kudryavtsev, V. N.; Myasoedov, A. G.; Chapron, B.; Zilitinkevich, S. S.

    2017-01-01

    In this paper we analyze SAR wind field features, in particular the effects of wind shadowing. These effects represent the dynamics of the internal atmospheric boundary layer, which is formed due to the transition of the air flow arriving from the rough land surface to the "smooth" water surface. In the wind-shadowed area, the flow accelerates, and a surface wind stress increases with fetch. The width of the shadow depends not only on the wind speed and atmospheric boundary layer stratification, but also on geographic features such as windflow multiple transformations over the complex surface land-Lake Chudskoe-land-Gulf of Finland. Measurements showed that, in the area of wind acceleration, the surface stress normalized by an equilibrium value (far from the coast) is a universal function of dimensionless fetch Xf/G. Surface wind stress reaches an equilibrium value at Xf/G ≈ 0.4, which is the scale of the planetary-boundary-layer relaxation.

  20. Space Weathering of the Lunar Surface by Solar Wind Particles

    Science.gov (United States)

    Kim, Sungsoo S.; Sim, Chaekyung

    2017-08-01

    The lunar regolith is space-weathered to a different degree in response to the different fluxes of incident solar wind particles and micrometeoroids. Crater walls, among other slating surfaces, are good tracers of the space-weathering process because they mature differently depending on the varying incident angles of weathering agents. We divide a crater wall into four quadrants (north, south, east, and west) and analyze the distribution of 950-nm/750-nm reflectance-ratio and 750-nm reflectance values in each wall quadrant, using the topography-corrected images by Multispectral Imager (MI) onboard SELENE (Kaguya). For thousands of impact craters across the Moon, we interpret the spectral distributions in the four wall quadrants in terms of the space weathering by solar wind particles and micrometeoroids and of gardening by meteroids. We take into account the solar-wind shielding by the Earth’s magnetotail to correctly assess the different spectral behaviors between east- and west-facing walls of the craters in the near-side of the Moon.

  1. Measurements of wind friction speeds over lava surfaces and assessment of sediment transport

    Science.gov (United States)

    Greeley, Ronald; Iversen, James D.

    1987-01-01

    Wind velocity profiles were obtained over alluvial plains, lava flows, and a cinder cone in the Mojave Desert to determine the wind shear and the potential for particle transport. It was found that aerodynamic roughness for winds increases nearly a factor of 5 as flow crosses from the alluvium to the lava surface, resulting in wind shear that is 21 percent greater. Thus, wind erosion and sand flux may be substantially enhanced over the lava field. Moreover, wind flow turbulence is enhanced in the wake of the cinder cone, which also increases erosion and sediment transportation by the wind.

  2. DISTRIBUTED EXTERNAL SURFACE HARDENING OF CAR DESIGN BY WINDING

    Directory of Open Access Journals (Sweden)

    O. V. Fomin

    2017-04-01

    Full Text Available Purpose. The paper involves coverage of features and results of the research conducted by the authors to determine the feasibility and establishment of pre-stressed-strained state of freight cars by winding in order to improve their strength characteristics. It is also necessary to present the theoretical justification for the effectiveness of the application of this method for car designs and an appropriate example for the tank-car. Methodology. The conducted study is based on an analysis of known works on the subject, mathematical justification and computer modeling. At the calculations of rolling stock components contemporary conventional techniques were used. Findings. Authors found that the winding method for pre-stressed-strained state is effective and appropriate for use in the construction of railway rolling stock and, in particular freight cars. Freight car designs with the pre-stressed-strained state are characterized by a number of strength advantages, among which there is an improvement of the work on the perception of operational loads and resource conservation. Originality. For the first time it is proposed the improvement of bearing capacity of freight car constructions through the creation of its component in the directed stress-strained state. It is also for the first time proposed the use of distributed external surface hardening by the method of winding to create a pre-stress-strained state of structural components of freight cars. The methods for winding designs of freight cars and their implementation were considered. Practical value. The studies developed a number of technical solutions for improving the design of freight cars and tank-container, which has been patented. Corresponding solutions for the tank-car are partially presented. Practical implementation of such solutions will significantly improve the technical, economic and operational performances of car designs.

  3. Observing seasonal variations of sea surface wind speed and significant wave height using TOPEX altimetry

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    One year of ocean topography experiment (TOPEX) altimeter data are used to study the seasonal variations of global sea surface wind speed and significant wave height. The major wind and wave zones of the world oceans are precisely identified, their seasonal variability and characteristics are quantitatively analyzed, and the diversity of global wind speed seasonality and the variability of significant wave height in response to sea surface wind speed are also revealed.

  4. Retrieval of ocean surface wind stress and drag coefficient from spaceborne SAR

    Institute of Scientific and Technical Information of China (English)

    杨劲松; 黄韦艮; 周长宝

    2001-01-01

    A model for retrieval of wind stress and drag coefficient on the sea surface with the data measured by spacebome synthetic aperture radar (SAR) has been developed based on the SAR imaging mechanisms of ocean surface capillary waves and short gravity waves. This model consists of radiometric calibration, wind speed retrieval and wind stress and drag coefficient calculation. A Radarsat SAR image has been used to calculate wind stress and drag coeffi cient. Good results have been achieved.

  5. Wind flow and wind loads on the surface of a tower-shaped building:Numerical simulations and wind tunnel experiment

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Flow structure and wind pressure distribution caused by obtuse obstacles are usually the focuses in Computational Wind Engineer researches (CWE). By solving the non-hydrostatical dynamic equations, PUMA model (Peking University Model of Atmospheric Environment) was developed and applied to simulating the flow structure and wind pressure distribution around a tower-shaped building. Evaluation about the wind environment and wind loads around the building was obtained through the analysis of the numerical simulation results and wind tunnel data. Comparisons between the simulation and wind tunnel study indicate that numerical simulation results agree well in the flow field and wind pressure distribution around the tower-shaped building. On the other hand, the horizontal grid interval of 2 m and the vertical grid of 3 m were still too crude to simulate the flow structure and wind pressure distribution on the building surface more exactly in detail; and the absence of suitable pressure perturbation parameterization scheme between the solid and the adjacent space also limits the accuracy of the numerical simulation. The numerical simulation model can be used to evaluate the wind environment and wind load around high buildings.

  6. Changes in Surface Wind Speed over North America from CMIP5 Model Projections and Implications for Wind Energy

    Directory of Open Access Journals (Sweden)

    Sujay Kulkarni

    2014-01-01

    Full Text Available The centennial trends in the surface wind speed over North America are deduced from global climate model simulations in the Climate Model Intercomparison Project—Phase 5 (CMIP5 archive. Using the 21st century simulations under the RCP 8.5 scenario of greenhouse gas emissions, 5–10 percent increases per century in the 10 m wind speed are found over Central and East-Central United States, the Californian Coast, and the South and East Coasts of the USA in winter. In summer, climate models projected decreases in the wind speed ranging from 5 to 10 percent per century over the same coastal regions. These projected changes in the surface wind speed are moderate and imply that the current estimate of wind power potential for North America based on present-day climatology will not be significantly changed by the greenhouse gas forcing in the coming decades.

  7. Estimation of Near Surface Wind Speeds in Strongly Rotating Flows

    CERN Document Server

    Crowell, Sean; Wicker, Louis

    2013-01-01

    Modeling studies consistently demonstrate that the most violent winds in tornadic vortices occur in the lowest tens of meters above the surface. These velocities are unobservable by radar platforms due to line of sight consider- ations. In this work, a methodology is developed which utilizes parametric tangential velocity models derived from Doppler radar measurements, to- gether with a tangential momentum and mass continuity constraint, to esti- mate the radial and vertical velocities in a steady axisymmetric frame. The main result is that information from observations aloft can be extrapolated into the surface layer of the vortex. The impact of the amount of information available to the retrieval is demonstrated through some numerical tests with pseudo-data.

  8. Comparison of surface wind stress measurements - Airborne radar scatterometer versus sonic anemometer

    Science.gov (United States)

    Brucks, J. T.; Leming, T. D.; Jones, W. L.

    1980-01-01

    Sea surface wind stress measurements recorded by a sonic anemometer are correlated with airborne scatterometer measurements of ocean roughness (cross section of radar backscatter) to establish the accuracy of remotely sensed data and assist in the definition of geophysical algorithms for the scatterometer sensor aboard Seasat A. Results of this investigation are as follows: Comparison of scatterometer and sonic anemometer wind stress measurements are good for the majority of cases; however, a tendency exists for scatterometer wind stress to be somewhat high for higher wind conditions experienced in this experiment (6-9 m/s). The scatterometer wind speed algorithm tends to overcompute the higher wind speeds by approximately 0.5 m/s. This is a direct result of the scatterometer overestimate of wind stress from which wind speeds are derived. Algorithmic derivations of wind speed and direction are, in most comparisons, within accuracies defined by Seasat A scatterometer sensor specifications.

  9. Inter-annual variability of sea surface temperature, wind speed and sea surface height anomaly over the tropical Indian Ocean

    Digital Repository Service at National Institute of Oceanography (India)

    Muraleedharan, P.M.; Pankajakshan, T.; Sathe, P.V.

    have made an attempt to study the annual and inter-annual variability of certain prominent processes occurring over the tropical Indian Ocean. The monthly mean values of Wind Speed (FSU), Sea Surface Temperature (REYNOLDS) and Sea Surface Height Anomaly...

  10. Sea surface wind speed estimation from space-based lidar measurements

    Directory of Open Access Journals (Sweden)

    Y. Hu

    2008-02-01

    Full Text Available Global satellite observations of lidar backscatter measurements acquired by the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO mission and collocated sea surface wind speed data from the Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR-E, are used to investigate the relation between wind driven wave slope variance and sea surface wind speed. The new slope variance – wind speed relation established from this study is similar to the linear relation from Cox-Munk (1954 and the log-linear relation from Wu (1972, 1990 for wind speed larger than 7 m/s and 13.3 m/s, respectively. For wind speed less than 7 m/s, the slope variance is proportional to the square root of the wind speed, assuming a two dimensional isotropic Gaussian wave slope distribution. This slope variance – wind speed relation becomes linear if a one dimensional Gaussian wave slope distribution is assumed. Contributions from whitecaps and subsurface backscattering are effectively removed by using 532 nm lidar depolarization measurements. This new slope variance – wind speed relation is used to derive sea surface wind speed from CALIPSO single shot lidar measurements (70 m spot size, after correcting for atmospheric attenuation. The CALIPSO wind speed result agrees with the collocated AMSR-E wind speed, with 1.2 m/s rms error.

  11. Addressing Spatial Variability of Surface-Layer Wind with Long-Range WindScanners

    DEFF Research Database (Denmark)

    Berg, Jacob; Vasiljevic, Nikola; Kelly, Mark C.;

    2015-01-01

    This paper presents an analysis of mean wind measurements from a coordinated system of long-range WindScanners. From individual scan patterns the mean wind field was reconstructed over a large area, and hence it highlights the spatial variability. From comparison with sonic anemometers, the quality...

  12. Surface deformations and wave generation by wind blowing over a viscous liquid

    CERN Document Server

    Paquier, Anna; Rabaud, Marc

    2015-01-01

    We investigate experimentally the early stage of the generation of waves by a turbulent wind at the surface of a viscous liquid. The spatio-temporal structure of the surface deformation is analyzed by the optical method Free Surface Synthetic Schlieren, which allows for time-resolved measurements with a micrometric accuracy. Because of the high viscosity of the liquid, the flow induced by the turbulent wind in the liquid remains laminar, with weak surface drift velocity. Two regimes of deformation of the liquid-air interface are identified. In the first regime, at low wind speed, the surface is dominated by rapidly propagating disorganized wrinkles, elongated in the streamwise direction, which can be interpreted as the surface response to the pressure fluctuations advected by the turbulent airflow. The amplitude of these deformations increases approximately linearly with wind velocity and are essentially independent of the fetch (distance along the channel). Above a threshold in wind speed, the perturbations ...

  13. Scattering by Artificial Wind and Rain Roughened Water Surfaces at Oblique Incidences

    Science.gov (United States)

    Craeye, C.; Sobieski, P. W.; Bliven, L. F.

    1997-01-01

    Rain affects wind retrievals from scatterometric measurements of the sea surface. To depict the additional roughness caused by rain on a wind driven surface, we use a ring-wave spectral model. This enables us to analyse the rain effect on K(u) band scatterometric observations from two laboratory experiments. Calculations based on the small perturbation method provide good simulation of scattering measurements for the rain-only case, whereas for combined wind and rain cases, the boundary perturbation method is appropriate.

  14. Sea Surface Wakes Observed by Spaceborne SAR in the Offshore Wind Farms

    Science.gov (United States)

    Li, Xiaoming; Lehner, Susanne; Jacobsen, Sven

    2014-11-01

    In the paper, we present some X-band spaceborne synthetic aperture radar (SAR) TerraSAR-X (TS-X) images acquired at the offshore wind farms in the North Sea and the East China Sea. The high spatial resolution SAR images show different sea surface wake patterns downstream of the offshore wind turbines. The analysis suggests that there are major two types of wakes among the observed cases. The wind turbine wakes generated by movement of wind around wind turbines are the most often observed cases. In contrast, due to the strong local tidal currents in the near shore wind farm sites, the tidal current wakes induced by tidal current impinging on the wind turbine piles are also observed in the high spatial resolution TS-X images. The discrimination of the two types of wakes observed in the offshore wind farms is also described in the paper.

  15. A preliminary assessment of the sea surface wind speed production of HY-2 scanning microwave radiometer

    Institute of Scientific and Technical Information of China (English)

    HUANG Xiaoqi; ZHU Jianhua; LIN Mingsen; ZHAO Yili; WANG He; CHEN Chuntao; PENG Hailong; ZHANG Youguang

    2014-01-01

    A scanning microwave radiometer (RM) was launched on August 16, 2011, on board HY-2 satellite. The six-month long global sea surface wind speeds observed by the HY-2 scanning microwave radiometer are preliminarily validated using in-situ measurements and WindSat observations, respectively, from January to June 2012. The wind speed root-mean-square (RMS) difference of the comparisons with in-situ data is 1.89 m/s for the measurements of NDBC and 1.72 m/s for the recent four-month data measured by PY30-1 oil platform, respectively. On a global scale, the wind speeds of HY-2 RM are compared with the sea surface wind speeds derived from WindSat, the RMS difference of 1.85 m/s for HY-2 RM collocated observations data set is calculated in the same period as above. With analyzing the global map of a mean difference between HY-2 RM and WindSat, it appears that the bias of the sea surface wind speed is obviously higher in the inshore regions. In the open sea, there is a relatively higher positive bias in the mid-latitude regions due to the overestimation of wind speed observations, while the wind speeds are underestimated in the Southern Ocean by HY-2 RM relative to WindSat observations.

  16. A Statistical Model for the Prediction of Wind-Speed Probabilities in the Atmospheric Surface Layer

    Science.gov (United States)

    Efthimiou, G. C.; Hertwig, D.; Andronopoulos, S.; Bartzis, J. G.; Coceal, O.

    2016-11-01

    Wind fields in the atmospheric surface layer (ASL) are highly three-dimensional and characterized by strong spatial and temporal variability. For various applications such as wind-comfort assessments and structural design, an understanding of potentially hazardous wind extremes is important. Statistical models are designed to facilitate conclusions about the occurrence probability of wind speeds based on the knowledge of low-order flow statistics. Being particularly interested in the upper tail regions we show that the statistical behaviour of near-surface wind speeds is adequately represented by the Beta distribution. By using the properties of the Beta probability density function in combination with a model for estimating extreme values based on readily available turbulence statistics, it is demonstrated that this novel modelling approach reliably predicts the upper margins of encountered wind speeds. The model's basic parameter is derived from three substantially different calibrating datasets of flow in the ASL originating from boundary-layer wind-tunnel measurements and direct numerical simulation. Evaluating the model based on independent field observations of near-surface wind speeds shows a high level of agreement between the statistically modelled horizontal wind speeds and measurements. The results show that, based on knowledge of only a few simple flow statistics (mean wind speed, wind-speed fluctuations and integral time scales), the occurrence probability of velocity magnitudes at arbitrary flow locations in the ASL can be estimated with a high degree of confidence.

  17. Two decades [1992-2012] of surface wind analyses based on satellite scatterometer observations

    Science.gov (United States)

    Desbiolles, Fabien; Bentamy, Abderrahim; Blanke, Bruno; Roy, Claude; Mestas-Nuñez, Alberto M.; Grodsky, Semyon A.; Herbette, Steven; Cambon, Gildas; Maes, Christophe

    2017-04-01

    Surface winds (equivalent neutral wind velocities at 10 m) from scatterometer missions since 1992 have been used to build up a 20-year climate series. Optimal interpolation and kriging methods have been applied to continuously provide surface wind speed and direction estimates over the global ocean on a regular grid in space and time. The use of other data sources such as radiometer data (SSM/I) and atmospheric wind reanalyses (ERA-Interim) has allowed building a blended product available at 1/4° spatial resolution and every 6 h from 1992 to 2012. Sampling issues throughout the different missions (ERS-1, ERS-2, QuikSCAT, and ASCAT) and their possible impact on the homogeneity of the gridded product are discussed. In addition, we assess carefully the quality of the blended product in the absence of scatterometer data (1992 to 1999). Data selection experiments show that the description of the surface wind is significantly improved by including the scatterometer winds. The blended winds compare well with buoy winds (1992-2012) and they resolve finer spatial scales than atmospheric reanalyses, which make them suitable for studying air-sea interactions at mesoscale. The seasonal cycle and interannual variability of the product compare well with other long-term wind analyses. The product is used to calculate 20-year trends in wind speed, as well as in zonal and meridional wind components. These trends show an important asymmetry between the southern and northern hemispheres, which may be an important issue for climate studies.

  18. Soil erosion rates from mixed soil and gravel surfaces in a wind tunnel

    Energy Technology Data Exchange (ETDEWEB)

    Ligotke, M.W.; Klopfer, D.C.

    1990-08-01

    Protective barriers have been identified as integral components of plans to isolate defense waste on the Hanford Site. The use of natural materials to construct protective barriers over waste site is being considered. Design requirements for protective barriers include preventing exposure of buried waste, and restricting penetration or percolation of surface waters through the waste zone. Studies were initiated to evaluate the effects of wind erosion on candidate protective barrier surfaces. A wind tunnel was used to provide controlled erosive stresses and to investigate the erosive effects of wind forces on proposed surface layers for protective barriers. Mixed soil and gravel surfaces were prepared and tested for resistance to wind erosion at the Pacific Northwest Laboratory Aerosol Wind Tunnel Research Facility. These tests were performed to investigate surface deflation caused by suspension of soil from various surface layer configurations and to provide a comparison of the relative resistance of the different surfaces to wind erosion. Planning, testing, and analyzing phases of this wind erosion project were coordinated with other tasks supporting the development of protective barriers. These tasks include climate-change predictions, field studies and modeling efforts. This report provides results of measurements of deflation caused by wind forces over level surfaces. Section 2.0 reviews surface layer characteristics and previous relevant studies on wind erosion, describes effects of erosion, and discusses wind tunnel modeling. Materials and methods of the wind tunnel tests are discussed in Section 3.0. Results and discussion are presented in Section 4.0, and conclusions and recommendations Section 5.0. 53 refs., 29 figs., 7 tabs.

  19. Variation in wind speed and surface shear stress from open floor to porous parallel windbreaks: A wind tunnel study

    Science.gov (United States)

    Guan, De-Xin; Zhong, Ye; Jin, Chang-Jie; Wang, An-Zhi; Wu, Jia-Bing; Shi, Ting-Ting; Zhu, Ting-Yao

    2009-08-01

    As vegetative windbreaks become established on a large scale in agricultural ecosystems, understanding the influence of windbreak networks on the momentum budget of the atmospheric boundary layer becomes important. The authors conducted a wind tunnel experiment to study the variation of wind speed profile and surface shear stress of wind flow passing from an open surface to another with parallel windbreaks. Five spacing (L = 5, 10, 15, 20, 30 h, wherein h is the windbreak height) windbreak arrays with moderate porosity (aerodynamic porosity α = 0.501) were used in the experiments. Both near-floor and over-array wind speed measurements showed that airflow will approach equilibrium state behind a special windbreak of the array, varying from 4th to 9th windbreak when the spacing change from 30 to 5 h. Within the range of L/h values investigated, arrays with narrower spacing cause higher friction velocity and roughness length, which were up to 2.26 and nearly 100 times those observed over open floor, respectively. A semiempirical momentum budget model is developed on the arrayed surface to estimate windbreak drag and shear stress on the protected floor. Windbreak drag accounts for more than 80% of shear stress on the arrayed surface, and the shear stress on protected floor is less than 20% when L/h < 40 based on the model estimation. The sum of the two estimated components agrees well with the estimates obtained from over-array wind profiles.

  20. Anisotropic Solar Wind Sputtering of the Lunar Surface Induced by Crustal Magnetic Anomalies

    Science.gov (United States)

    Poppe, A. R.; Sarantos, M.; Halekas, J. S.; Delory, G. T.; Saito, Y.; Nishino, M.

    2014-01-01

    The lunar exosphere is generated by several processes each of which generates neutral distributions with different spatial and temporal variability. Solar wind sputtering of the lunar surface is a major process for many regolith-derived species and typically generates neutral distributions with a cosine dependence on solar zenith angle. Complicating this picture are remanent crustal magnetic anomalies on the lunar surface, which decelerate and partially reflect the solar wind before it strikes the surface. We use Kaguya maps of solar wind reflection efficiencies, Lunar Prospector maps of crustal field strengths, and published neutral sputtering yields to calculate anisotropic solar wind sputtering maps. We feed these maps to a Monte Carlo neutral exospheric model to explore three-dimensional exospheric anisotropies and find that significant anisotropies should be present in the neutral exosphere depending on selenographic location and solar wind conditions. Better understanding of solar wind/crustal anomaly interactions could potentially improve our results.

  1. Wave glider observations of surface winds and currents in the core of Typhoon Danas

    Science.gov (United States)

    Mitarai, S.; McWilliams, J. C.

    2016-11-01

    Simultaneous monitoring of surface winds and currents is essential to understand oceanic responses to tropical cyclones. We used a new platform, a Wave Glider (Liquid Robotics) to observe air-sea processes during a typhoon, equivalent to a category 4-hurricane, at peak strength, near Okinawa, Japan. Surface winds showed strong asymmetry in both speed and direction, faster fore than aft. Rotations of surface winds and currents were not coupled; currents rotated clockwise in the wake of the typhoon eye after passage of rapid wind rotations. Wind work was mostly done ahead of the eye, amplifying prior inertial motions with a phase shift. Wind-induced energy was nearly balanced with an increase in estimated kinetic energy of the upper ocean current, relative to prior inertial oscillations. This study provides a newer, more complete view of actual atmosphere-ocean interactions in a typhoon.

  2. Interannual variations of surface winds over China marginal seas

    Institute of Scientific and Technical Information of China (English)

    SUN Che; YAN Xiaomei

    2012-01-01

    In a study of surface monsoon winds over the China marginal seas,Sun et al.(2012) use singular value decomposition method to identify regional dominant modes and analyze their interdecadal variability.This paper continues to evaluate the interannual variability of each dominant mode and its relation to various atmospheric,oceanic and land factors.The findings include:1) The intensity of the winter monsoon over the East China Sea is highly correlated with the Siberian High intensity and anti-correlated with the latitudinal position of the Aleutian Low as well as the rainfall in eastem China,Korean Peninsula and Japan; 2) The western Pacific subtropical high is significantly correlated with the summer monsoon intensity over the East China Sea and anti-correlated with the summer monsoon over the South China Sea; 3) The winter monsoon in a broad zonal belt through the Luzon Strait is dominated by the ENSO signal,strengthening in the La Ni(n)a phase and weakening in the El Ni(n)o phase.This inverse relation exhibits interdecadal shift with a period of weak correlation in the 1980s; 4) Analysis of tidal records validates the interdecadal weakening of the East Asian summer monsoon and reveals an atmospheric bridge that conveys the ENSO signal into the South China Sea via the winter monsoon.

  3. Soil erosion rates from mixed soil and gravel surfaces in a wind tunnel: A preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Ligotke, M.W.

    1988-12-01

    Tests of wind erosion were performed in a controlled-environment wind tunnel to support the development of natural-material protective barriers for long-term isolation of radioactive waste. Barrier performance standards currently being developed for internal and external barrier performance are expected to mandate a surface layer that is resistant to wind erosion. The purpose of this study was to initiate a series of tests to determine suitable soil and gravel mixtures for such a barrier and to test worst-case surface layer conditions under the influence of high wind speeds. Six mixed soil and gravel surfaces were prepared, weathered to represent natural wind-blown desert areas, and subjected to controlled wind erosion forces in a wind tunnel. The applied erosive forces, including surface shear forces, were characterized to provide a means of relating wind tunnel results with actual field conditions. Soil particle losses from the surfaces caused by suspension, saltation, and surface creep were monitored by aerosol sample probes and mass balance measurements. 23 refs., 22 figs., 3 tabs.

  4. Survey on effect of surface winds on aircraft design and operation and recommendations for needed wind research

    Science.gov (United States)

    Houbolt, J. C.

    1973-01-01

    A survey of the effect of environmental surface winds and gusts on aircraft design and operation is presented. A listing of the very large number of problems that are encountered is given. Attention is called to the many studies that have been made on surface winds and gusts, but development in the engineering application of these results to aeronautical problems is pointed out to be still in the embryonic stage. Control of the aircraft is of paramount concern. Mathematical models and their application in simulation studies of airplane operation and control are discussed, and an attempt is made to identify their main gaps or deficiencies. Key reference material is cited. The need for better exchange between the meteorologist and the aeronautical engineer is discussed. Suggestions for improvements in the wind and gust models are made.

  5. Pulsatory characteristics of wind velocity in sand flow over typical underlying surfaces

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Pulsatory characteristics of wind velocity in sand flow over Gobi and mobile sand surface have been investigated experimentally in the wind tunnel. The primary goal of this paper is to reveal the relation- ship between pulsatory characteristics of instantaneous wind speed in sand flow and the motion state of sand grains. For a given underlying surface, pulsation of wind velocities in sand flow on different heights has a good correlation. As the space distance among different heights increases, fluctuation of instantaneous wind speed presents a decreasing trend and its amplitude is closely related to the mo- tion state of sand grains and their transport. Pulsatory intensity increases with the indicated wind speed, but its relative value does not depend on it, only agrees with height.

  6. Complex Wind-Induced Variations of Surface Snow Accumulation Rates over East Antarctica

    Science.gov (United States)

    Das, I.; Scambos, T. A.; Koenig, L.; van den Broeke, M.; Lenaerts, J.

    2015-12-01

    Accurate quantification of surface snow-accumulation over Antarctica is important for mass balance estimates and climate studies based on ice core records. Using airborne radar, lidar and thresholds of surface slope, modeled surface mass balance (SMB) and wind fields, we have predicted continent-wide distribution of wind-scour zones over Antarctica. These zones are located over relatively steep ice surfaces formed by ice flow over bedrock topography. Near-surface winds accelerate over these steeper slopes and erode and sublimate the snow. This results in numerous localized regions (typically ≤ 200 km2) with reduced or negative surface accumulation. Although small zones of re-deposition occur at the base of the steeper slope areas, the redeposited mass is small relative to the ablation loss. Total losses from wind-scour and wind-glaze areas amounts to tens of gigatons annually. Near the coast, winds often blow significant amounts of surface snow from these zones into the ocean. Large uncertainties remain in SMB estimates over East Antarctica as climate models do not adequately represent the small-scale physical processes that lead to mass loss or redistribution over the wind-scour zones. In this study, we also use Operation IceBridge's snow radar data to provide evidence for a gradual ablation of ~16-18 m of firn (~200 years of accumulation) from wind-scour zones over the upper Recovery Ice Stream catchment. The maximum ablation rates observed in this region are ~ -54 kg m-2 a-1 (-54 mm water equivalent a-1). Our airborne radio echo-sounding analysis show snow redeposition downslope of the wind-scour zones is <10% of the cumulative mass loss. Our study shows that the local mass loss is dominated by sublimation to water vapor rather than wind-transport of snow.

  7. A Method for Sea Surface Wind Field Retrieval from SAR Image Mode Data

    Institute of Scientific and Technical Information of China (English)

    SHAO Weizeng; SUN Jian; GUAN Changlong; SUN Zhanfeng

    2014-01-01

    To retrieve wind field from SAR images, the development for surface wind field retrieval from SAR images based on the improvement of new inversion model is present. Geophysical Model Functions (GMFs) have been widely applied for wind field retrieval from SAR images. Among them CMOD4 has a good performance under low and moderate wind conditions. Although CMOD5 is developed recently with a more fundamental basis, it has ambiguity of wind speed and a shape gradient of normalized radar cross section under low wind speed condition. This study proposes a method of wind field retrieval from SAR image by com-bining CMOD5 and CMOD4 Five VV-polarisation RADARSAT2 SAR images are implemented for validation and the retrieval re-sults by a combination method (CMOD5 and CMOD4) together with CMOD4 GMF are compared with QuikSCAT wind data. The root-mean-square error (RMSE) of wind speed is 0.75 m s-1 with correlation coefficient 0.84 using the combination method and the RMSE of wind speed is 1.01 m s-1 with correlation coefficient 0.72 using CMOD4 GMF alone for those cases. The proposed method can be applied to SAR image for avoiding the internal defect in CMOD5 under low wind speed condition.

  8. Removing the impact of wind direction on remote sensing of sea surface salinity

    Institute of Scientific and Technical Information of China (English)

    YIN Xiaobin; LIU Yuguang; ZHANG Hande

    2006-01-01

    Using the small-slope approximation model of microwave emission of rough sea surface, the impacts of sea surface wind on brightness temperature variations generated by the surface roughness, i.e. △Th,v, are investigated. Here △T denotes the brightness temperature variation, and "h" and "v" denote the horizontal and vertical polarizations respectively. △Th,v has a linear relation with wind speed, sea surface temperature (SST) and sea surface salinity (SSS) respectively. Further more, the impact of wind direction on SSS retrieval, under small incidence angles, can be removed by calculating (△Th+△Tv). These characteristics provide simple new ways to develop an SSS retrieval algorithm without wind direction factor.

  9. Influence of Persistent Wind Scour on the Surface Mass Balance of Antarctica

    Science.gov (United States)

    Das, Indrani; Bell, Robin E.; Scambos, Ted A.; Wolovick, Michael; Creyts, Timothy T.; Studinger, Michael; Fearson, Nicholas; Nicolas, Julien P.; Lenaerts, Jan T. M.; vandenBroeke, Michiel R.

    2013-01-01

    Accurate quantification of surface snow accumulation over Antarctica is a key constraint for estimates of the Antarctic mass balance, as well as climatic interpretations of ice-core records. Over Antarctica, near-surface winds accelerate down relatively steep surface slopes, eroding and sublimating the snow. This wind scour results in numerous localized regions (Antarctica. The scour zones are persistent because they are controlled by bedrock topography. On the basis of our Dome A observations, we develop an empirical model to predict wind-scour zones across the Antarctic continent and find that these zones are predominantly located in East Antarctica. We estimate that approx. 2.7-6.6% of the surface area of Antarctica has persistent negative net accumulation due to wind scour, which suggests that, across the continent, the snow mass input is overestimated by 11-36.5 Gt /yr in present surface-mass-balance calculations.

  10. Wind fields of storms from surface isobars for wave hindcasting

    Digital Repository Service at National Institute of Oceanography (India)

    Varkey, M.J.; Vaithiyanathan, R.; Santanam, K.

    Marine operations of various types are critically linked to mean and extreme wave statistics. In the Indian seas extreme wave conditions are caused by cyclones and steady strong monsoon winds. Wave data from cyclone areas are not directly available...

  11. Surface deformations and wave generation by wind blowing over a viscous liquid

    Science.gov (United States)

    Paquier, A.; Moisy, F.; Rabaud, M.

    2015-12-01

    We investigate experimentally the early stage of the generation of waves by a turbulent wind at the surface of a viscous liquid. The spatio-temporal structure of the surface deformation is analyzed by the optical method Free Surface Synthetic Schlieren, which allows for time-resolved measurements with a micrometric accuracy. Because of the high viscosity of the liquid, the flow induced by the turbulent wind in the liquid remains laminar, with weak surface drift velocity. Two regimes of deformation of the liquid-air interface are identified. In the first regime, at low wind speed, the surface is dominated by rapidly propagating disorganized wrinkles, elongated in the streamwise direction, which correspond to the surface response to the pressure fluctuations advected by the turbulent airflow. The amplitude of these deformations increases approximately linearly with wind velocity and are essentially independent of the fetch (distance along the channel). Above a threshold in wind speed, we observe the growth of well defined gravity-capillary waves with crests nearly perpendicular to the wind direction. In this second regime, the wave amplitude increases with wind speed but far more quickly than in the first regime.

  12. Surface Fluxes and Wind-Wave Interactions in Weak Wind Conditions

    Science.gov (United States)

    2016-06-07

    science /abl/cblast LONG-TERM GOALS We will investigate air-sea transfer of momentum, heat, and moisture under weak wind conditions. We will...over the ASIT tower and the wind direction was good for the tower sonic performance (6 days in total). As we found last year that although the momentum...flux derived from the aircraft is flight- direction dependent, which was recently found to be a common problem for all aircraft flux measurements

  13. Changes in Surface Wind Speed over North America from CMIP5 Model Projections and Implications for Wind Energy

    OpenAIRE

    Sujay Kulkarni; Huei-Ping Huang

    2014-01-01

    The centennial trends in the surface wind speed over North America are deduced from global climate model simulations in the Climate Model Intercomparison Project—Phase 5 (CMIP5) archive. Using the 21st century simulations under the RCP 8.5 scenario of greenhouse gas emissions, 5–10 percent increases per century in the 10 m wind speed are found over Central and East-Central United States, the Californian Coast, and the South and East Coasts of the USA in winter. In summer, climate models proje...

  14. Annual and interannual variability of scatterometer ocean surface wind over the South China Sea

    DEFF Research Database (Denmark)

    Zhang, GS; Xu, Q.; Gong, Z.

    2014-01-01

    To investigate the annual and interannual variability of ocean surface wind over the South China Sea (SCS), the vector empirical orthogonal function (VEOF) method and the Hilbert-Huang transform (HHT) method were employed to analyze a set of combined satellite scatterometer wind data during...

  15. Probability distribution of surface wind speed induced by convective adjustment on Venus

    Science.gov (United States)

    Yamamoto, Masaru

    2017-03-01

    The influence of convective adjustment on the spatial structure of Venusian surface wind and probability distribution of its wind speed is investigated using an idealized weather research and forecasting model. When the initially uniform wind is much weaker than the convective wind, patches of both prograde and retrograde winds with scales of a few kilometers are formed during active convective adjustment. After the active convective adjustment, because the small-scale convective cells and their related vertical momentum fluxes dissipate quickly, the large-scale (>4 km) prograde and retrograde wind patches remain on the surface and in the longitude-height cross-section. This suggests the coexistence of local prograde and retrograde flows, which may correspond to those observed by Pioneer Venus below 10 km altitude. The probability distributions of surface wind speed V during the convective adjustment have a similar form in different simulations, with a sharp peak around ∼0.1 m s-1 and a bulge developing on the flank of the probability distribution. This flank bulge is associated with the most active convection, which has a probability distribution with a peak at the wind speed 1.5-times greater than the Weibull fitting parameter c during the convective adjustment. The Weibull distribution P(> V) (= exp[-(V/c)k]) with best-estimate coefficients of Lorenz (2016) is reproduced during convective adjustments induced by a potential energy of ∼7 × 107 J m-2, which is calculated from the difference in total potential energy between initially unstable and neutral states. The maximum vertical convective heat flux magnitude is proportional to the potential energy of the convective adjustment in the experiments with the initial unstable-layer thickness altered. The present work suggests that convective adjustment is a promising process for producing the wind structure with occasionally generating surface winds of ∼1 m s-1 and retrograde wind patches.

  16. Cauchy-Matern Model of Sea Surface Wind Speed at the Lake Worth, Florida

    Directory of Open Access Journals (Sweden)

    Ming Li

    2012-01-01

    Full Text Available We study the Cauchy-Matern (CM process with long-range dependence (LRD. The closed form of its power spectrum density (PSD function is given. We apply it to model the autocovariance function (ACF and the PSD of the sea surface wind speed (wind speed for short observed in the Lake Worth, Florida, over the 1984–2006 period. The present results exhibit that the wind speed at the Lake Worth over 1984–2006 is of LRD. The present results exhibit that the CM process may yet be a novel model to fit the wind speed there.

  17. Spectral Properties of ENVISAT ASAR and QuikSCAT Surface Winds in the North Sea

    DEFF Research Database (Denmark)

    Karagali, Ioanna; Larsén, Xiaoli Guo; Badger, Merete

    2013-01-01

    Spectra derived from ENVISAT Advanced Synthetic Aperture Radar (ASAR) and QuikSCAT near-surface ocean winds are investigated over the North Sea. The two sensors offer a wide range of spatial resolutions, from 600 m to 25 km, with different spatial coverage over the area of interest. This provides...... a unique opportunity to study the impact of the spatial resolution on the spectral properties of the wind over a wide range of length scales. Initially, a sub-domain in the North Sea is chosen, due to the overlap of 87 wind scenes from both sensors. The impact of the spatial resolution is manifested...... or lower. The lower power levels of coarser resolution wind products, particularly when comparing QuikSCAT to ENVISAT ASAR, strongly suggest that the effective resolution of the wind products should be high enough to resolve the spectral properties. Spectra computed from 87 wind maps are consistent...

  18. Applications of SMAP data to retrieval of ocean surface wind and salinity

    Science.gov (United States)

    Yueh, Simon; Fore, Alexander; Tang, Wenqing; Hayashi, Akiko; Stiles, Bryan; Zhang, Fuqing; Weng, Yonghui; Real, Nicolas

    2016-10-01

    We have examined the L-band radiometer and radar data from NASA's Soil Moisture Active Passive (SMAP) mission for ocean research and applications. We find that the SMAP data are in excellent agreement with the geophysical model function (GMF) derived from the Aquarius data up to a wind speed of 20 ms-1. For severe wind conditions, the higher resolution data from SMAP allowed us to assess the sensitivity of L-band radiometer signals to hurricane force winds. We applied the L-band GMF to the retrieval of ocean surface wind and SSS from the SMAP data. Comparison with the European Center for Medium-Range Weather Forecasting, WindSat and RapidSCAT wind speeds suggests that SMAP's radiometer wind speed reaches an excellent accuracy of about 1.1-1.7 ms-1 below a wind speed of 20 ms-1. We have also found that the maximum wind speed derived from the SMAP radiometer data can reach 140 knots for severe storms and are generally in good agreement with the hurricane track analysis and operational aircraft Stepped Frequency Microwave Radiometer wind speeds. The spatial patterns of the SMAP SSS agree well with climatological distributions, but exhibit several unique spatial and temporal features.

  19. nowCOAST's Map Service for NOAA NWS NDFD Gridded Forecasts of Surface Wind Gust (knots)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Map Information: This nowCOAST time-offsets map service provides maps depicting the NWS surface wind gust forecasts from the National Digital Forecast Database...

  20. Effect of phase coupling on surface amplitude distribution of wind waves

    Digital Repository Service at National Institute of Oceanography (India)

    Varkey, M.J.

    Nonlinear features of wind generated surface waves are considered here to be caused by nonrandomness (non-Uniform) in the phase spectrum. Nonrandomness in recorded waves, if present, would be generally obscured within the error level of observations...

  1. Doppler lidar investigation of wind turbine wake characteristics and atmospheric turbulence under different surface roughness.

    Science.gov (United States)

    Zhai, Xiaochun; Wu, Songhua; Liu, Bingyi

    2017-06-12

    Four field experiments based on Pulsed Coherent Doppler Lidar with different surface roughness have been carried out in 2013-2015 to study the turbulent wind field in the vicinity of operating wind turbine in the onshore and offshore wind parks. The turbulence characteristics in ambient atmosphere and wake area was analyzed using transverse structure function based on Plane Position Indicator scanning mode. An automatic wake processing procedure was developed to determine the wake velocity deficit by considering the effect of ambient velocity disturbance and wake meandering with the mean wind direction. It is found that the turbine wake obviously enhances the atmospheric turbulence mixing, and the difference in the correlation of turbulence parameters under different surface roughness is significant. The dependence of wake parameters including the wake velocity deficit and wake length on wind velocity and turbulence intensity are analyzed and compared with other studies, which validates the empirical model and simulation of a turbine wake for various atmosphere conditions.

  2. Comparison among four kinds of data of sea surface wind stress in the South China Sea

    Institute of Scientific and Technical Information of China (English)

    谢强; 王卫强; 毛庆文

    2002-01-01

    By using remote sensing (ERS) data, FSU data, GOADS data and Hellerman & Rcsenstein objective analysis data to analyze the sea surface wind stress in the South China Sea, it is found that the remote sensing data have higher resolution and more reasonable values. Therefore we suggest that remote sensing data be chosen in the study of climatological features of sea surface wind stress and its seasonal variability in the South China Sea, especially in the study of small and middle scale eddies.

  3. Influence of persistent wind scour on the surface mass balance of Antarctica

    NARCIS (Netherlands)

    Das, I.; Bell, R.E.; Lenaerts, J.T.M.; Broeke, M.R. van den

    2013-01-01

    Accurate quantification of surface snow accumulation over Antarctica is a key constraint for estimates of the Antarctic mass balance, as well as climatic interpretations of ice-core records1,2. Over Antarctica, near-surface winds accelerate down relatively steep surface slopes, eroding and sublimati

  4. Multisensor satellite data integration for sea surface wind speed and direction determination

    Science.gov (United States)

    Glackin, D. L.; Pihos, G. G.; Wheelock, S. L.

    1984-01-01

    Techniques to integrate meteorological data from various satellite sensors to yield a global measure of sea surface wind speed and direction for input to the Navy's operational weather forecast models were investigated. The sensors were launched or will be launched, specifically the GOES visible and infrared imaging sensor, the Nimbus-7 SMMR, and the DMSP SSM/I instrument. An algorithm for the extrapolation to the sea surface of wind directions as derived from successive GOES cloud images was developed. This wind veering algorithm is relatively simple, accounts for the major physical variables, and seems to represent the best solution that can be found with existing data. An algorithm for the interpolation of the scattered observed data to a common geographical grid was implemented. The algorithm is based on a combination of inverse distance weighting and trend surface fitting, and is suited to combing wind data from disparate sources.

  5. Characteristics of surface wind structure of tropical cyclones over the north Indian Ocean

    Indian Academy of Sciences (India)

    M Mohapatra; Monica Sharma

    2015-10-01

    Tropical cyclone (TC) wind field monitoring and forecast are important for mariners, ships on sea and modelling group for creation of synthetic vortex, and storm surge and coastal inundation forecasting. Among others, a multi-platform satellite surface wind analysis developed by Co-operative Institute for Research in the Atmosphere (CIRA), USA for the TCs are referred by India Meteorological Department for surface wind field monitoring of TC. Hence, a study has been undertaken to analyze the characteristics of surface wind distribution and hence the structure of TC based on the real time data available from CIRA during 2007–2013. The study includes 19 TCs over the Bay of Bengal (BOB) and six over Arabian Sea (AS). The maximum radial extent of winds reaching threshold values of 34(17), 50(26) and 64(33) knot (ms−1) in each of the four geographical quadrants has been segregated with respect to season of formation, basin of formation and intensity of TC for analysis. The objective is to develop a reference surface wind structure of TC and examine its validity with respect to physical processes. The size of outer core (34(17) knot (ms−1) wind radial extension) as well as inner core (50(26) and 64(33) knot (ms−1) wind radial extension) increases significantly with increase in intensification of TC over BOB during both pre-monsoon and post-monsoon seasons and over AS during pre-monsoon season. The outer core of winds in TCs over the BOB is asymmetric in both pre-monsoon and post-monsoon seasons and for all categories of intensity of TCs. On the other hand, the asymmetry in inner core winds is significantly less. There is also no asymmetry in radial wind extension over the AS during both the seasons, except in case of outer core wind radial extension of VSCS during pre-monsoon season. The low level environment like enhanced cross equatorial flow, lower/middle level relative humidity, vertical wind shear and proximity of TC to the land surface are the determining

  6. Wind influence on surface current variability in the Ibiza Channel from HF Radar

    Science.gov (United States)

    Lana, Arancha; Marmain, Julien; Fernández, Vicente; Tintoré, Joaquin; Orfila, Alejandro

    2016-04-01

    Surface current variability is investigated using 2.5 years of continuous velocity measurements from an high frequency radar (HFR) located in the Ibiza Channel (Western Mediterranean Sea). The Ibiza Channel is identified as a key geographical feature for the exchange of water masses but still poorly documented. Operational, quality controlled, HFR derived velocities are provided by the Balearic Islands Coastal Observing and Forecasting System (SOCIB). They are assessed by performing statistical comparisons with current-meter, ADCP, and surface lagrangian drifters. HFR system does not show significant bias, and its accuracy is in accordance with previous studies performed in other areas. The main surface circulation patterns are deduced from an EOF analysis. The first three modes represent almost 70 % of the total variability. A cross-correlation analysis between zonal and meridional wind components and the temporal amplitudes of the first three modes reveal that the first two modes are mainly driven by local winds, with immediate effects of wind forcing and veering following Ekman effect. The first mode (37 % of total variability) is the response of meridional wind while the second mode (24 % of total variability) is linked primarily with zonal winds. The third and higher order modes are related to mesoscale circulation features. HFR derived surface transport presents a markedly seasonal variability being mostly southwards. Its comparison with Ekman-induced transport shows that wind contribution to the total surface transport is on average around 65 %.

  7. Satellite-derived sea surface height and sea surface wind data fusion for spilled oil tracking

    Science.gov (United States)

    Kozai, Katsutoshi

    2003-12-01

    An attempt is made to estimate the trajectory of the spilled oil from the sunken tanker Nakhodka occurred on January 2, 1997 in the Japan Sea by fusing two microwave sensor data, namely ERS-2 altimeter and ADEOS/NSCAT scatterometer data. In this study 'fusion' is defined as the method of more reliable prediction for the trajectory of spilled oil than before. Geostrophic current vectors are derived from ERS-2 altimeter and wind-induced drift vectors are derived from ADEOS/NSCAT scatterometer data These two different satellite-derived vectors are 'fused' together in the surface current model to estimate and evaluate the trajectory of spilled oil from the sunken tanker Nakhodka. The distribution of component of spill vector is mostly accounted for by the distribution of geostrophic velocity component during the study period with some discrepancies during March, 1997.

  8. Understanding the Role of Wind in Reducing the Surface Mass Balance Estimates over East Antarctica

    Science.gov (United States)

    Das, I.; Scambos, T. A.; Koenig, L.; Creyts, T. T.; Bell, R. E.; van den Broeke, M. R.; Lenaerts, J.; Paden, J. D.

    2014-12-01

    Accurate quantification of surface snow-accumulation over Antarctica is important for mass balance estimates and climate studies based on ice core records. An improved estimate of surface mass balance must include the significant role near-surface wind plays in the sublimation and redistribution of snow across Antarctica. We have developed an empirical model based on airborne radar and lidar observations, and modeled surface mass balance and wind fields to produce a continent-wide prediction of wind-scour zones over Antarctica. These zones have zero to negative surface mass balance, are located over locally steep ice sheet areas (>0.002) and controlled by bedrock topography. The near-surface winds accelerate over these zones, eroding and sublimating the surface snow. This scouring results in numerous localized regions (≤ 200 km2) with reduced surface accumulation. Each year, tens of gigatons of snow on the Antarctic ice sheet are ablated by persistent near-surface katabatic winds over these wind-scour zones. Large uncertainties remain in the surface mass balance estimates over East Antarctica as climate models do not adequately represent the small-scale physical processes that lead to mass loss through sublimation or redistribution over the wind-scour zones. In this study, we integrate Operation IceBridge's snow radar over the Recovery Ice Stream with a series of ice core dielectric and depth-density profiles for improved surface mass balance estimates that reflect the mass loss over the wind-scour zones. Accurate surface mass balance estimates from snow radars require spatially variable depth-density profiles. Using an ensemble of firn cores, MODIS-derived surface snow grain size, modeled accumulation rates and surface temperatures from RACMO2, we assemble spatially variable depth-density profiles and use our mapping of snow density variations to estimate layer mass and net accumulation rates from snow radar layer data. Our study improves the quantification of

  9. Satellite SAR observation of the sea surface wind field caused by rain cells

    Institute of Scientific and Technical Information of China (English)

    YE Xiaomin; LIN Mingsen; YUAN Xinzhe; DING Jing; XIE Xuetong; ZHANG Yi; XU Ying

    2016-01-01

    Rain cells or convective rain, the dominant form of rain in the tropics and subtropics, can be easy detected by satellite Synthetic Aperture Radar (SAR) images with high horizontal resolution. The footprints of rain cells on SAR images are caused by the scattering and attenuation of the rain drops, as well as the downward airflow. In this study, we extract sea surface wind field and its structure caused by rain cells by using a RADARSAT-2 SAR image with a spatial resolution of 100 m for case study. We extract the sea surface wind speeds from SAR image by using CMOD4 geophysical model function with outside wind directions of NCEP final operational global analysis data, Advance Scatterometer (ASCAT) onboard European MetOp-A satellite and microwave scatterometer onboard Chinese HY-2 satellite, respectively. The root-mean-square errors (RMSE) of these SAR wind speeds, validated against NCEP, ASCAT and HY-2, are 1.48 m/s, 1.64 m/s and 2.14 m/s, respectively. Circular signature patterns with brighter on one side and darker on the opposite side on SAR image are interpreted as the sea surface wind speed (or sea surface roughness) variety caused by downdraft associated with rain cells. The wind speeds taken from the transect profile which superposes to the wind ambient vectors and goes through the center of the circular footprint of rain cell can be fitted as a cosine or sine curve in high linear correlation with the values of no less than 0.80. The background wind speed, the wind speed caused by rain cell and the diameter of footprint of the rain cell with kilometers or tens of kilometers can be acquired by fitting curve. Eight cases interpreted and analyzed in this study all show the same conclusion.

  10. Wind flow modulation due to variations of the water surface roughness

    Science.gov (United States)

    Shomina, Olga; Ermakov, Stanislav; Kapustin, Ivan; Lazareva, Tatiana

    2016-04-01

    Air-ocean interaction is a classical problem in atmosphere and ocean physics, which has important geophysical applications related to calculation of vertical and horizontal humidity, aerosol and gas fluxes, development of global climate models and weather forecasts. The structure of wind flow over fixed underlying surfaces, such as forestry, buildings, mountains, is well described, while the interaction between a rough water surface and turbulent wind is far more complicated because of the presence of wind waves with different wavelength and amplitudes and propagating with different velocities and directions. The aim of this study was to investigate experimentally the variability of the wind profile structure due to variations of wave characteristics. The surface roughness variations were produced using a) surfactant films (oleic acid) spread on the water surface and b) mechanically generated waves superimposed on wind waves. The first case is related to oil slicks on sea surface, the second one - to the sea swell, which propagates into zones with lower wind velocities and interacts with wind flow. Laboratory experiments were conducted in the Oval Wind Wave Tank (OWWT) at the Institute of Applied Physics, cross-section of the wind channel is 30 cm x30 cm. Wave amplitude and the spectrum of surface waves were measured by a wire wave gauge, the wind speed was measured using a hot-wire anemometer DISA and a Pitot tube. In the experiments with surfactants, two frequencies of dripping of the oleic acid were studied, so that low concentration films with the elasticity parameters of about 19 mN/m and the high concentration ("thick") films with the elasticity of 34 mN/m were formed. In the experiments with mechanically generated waves (MGW) different regimes were studied with MGW amplitude of 3.4 mm and of 4.4 mm, and with MGW frequencies of 3.3 Hz and 3.7 Hz. It was shown, that: a) the mean velocity of the wind flow in the presence of surfactant and MGW can be described

  11. Using Surface Pressure to Improve Tropical Cyclone Surface Wind Retrievals from Synthetic Aperture Radar Imagery

    Science.gov (United States)

    2012-09-30

    Jochen Horstmann of NATO Undersea Research Centre ( NURC ). GD and NURC have developed separate methods for estimating wind directions. In addition, NURC ...has been developing “cross-pol” GMFs, which have a lot of promise in the high wind regime. The GD and NURC wind directions are merged into a single

  12. High wind speeds prevent formation of a distinct bacterioneuston community in the sea-surface microlayer.

    Science.gov (United States)

    Rahlff, Janina; Stolle, Christian; Giebel, Helge-Ansgar; Brinkhoff, Thorsten; Ribas-Ribas, Mariana; Hodapp, Dorothee; Wurl, Oliver

    2017-05-01

    The sea-surface microlayer (SML) at the boundary between atmosphere and hydrosphere represents a demanding habitat for bacteria. Wind speed is a crucial but poorly studied factor for its physical integrity. Increasing atmospheric burden of CO2, as suggested for future climate scenarios, may particularly act on this habitat at the air-sea interface. We investigated the effect of increasing wind speeds and different pCO2 levels on SML microbial communities in a wind-wave tunnel, which offered the advantage of low spatial and temporal variability. We found that enrichment of bacteria in the SML occurred solely at a U10 wind speed of ≤5.6 m s-1 in the tunnel and ≤4.1 m s-1 in the Baltic Sea. High pCO2 levels further intensified the bacterial enrichment in the SML during low wind speed. In addition, low wind speed and pCO2 induced the formation of a distinctive bacterial community as revealed by 16S rRNA gene fingerprints and influenced the presence or absence of individual taxonomic units within the SML. We conclude that physical stability of the SML below a system-specific wind speed threshold induces specific bacterial communities in the SML entailing strong implications for ecosystem functioning by wind-driven impacts on habitat properties, gas exchange and matter cycling processes. © FEMS 2017.

  13. Modeling Solar-Wind Heavy-Ions' Potential Sputtering of Lunar KREEP Surface

    Science.gov (United States)

    Barghouty, A. F.; Meyer, F. W.; Harris, R. P.; Adams, J. H., Jr.

    2012-01-01

    Recent laboratory data suggest that potential sputtering may be an important weathering mechanism that can affect the composition of both the lunar surface and its tenuous exosphere; its role and implications, however, remain unclear. Using a relatively simple kinetic model, we will demonstrate that solar-wind heavy ions induced sputtering of KREEP surfaces is critical in establishing the timescale of the overall solar-wind sputtering process of the lunar surface. We will also also show that potential sputtering leads to a more pronounced and significant differentiation between depleted and enriched surface elements. We briefly discuss the impacts of enhanced sputtering on the composition of the regolith and the exosphere, as well as of solar-wind sputtering as a source of hydrogen and water on the moon.

  14. Doppler Navigation System with a Non-Stabilized Antenna as a Sea-Surface Wind Sensor.

    Science.gov (United States)

    Nekrasov, Alexey; Khachaturian, Alena; Veremyev, Vladimir; Bogachev, Mikhail

    2017-06-09

    We propose a concept of the utilization of an aircraft Doppler Navigation System (DNS) as a sea-surface wind sensor complementary to its normal functionality. The DNS with an antenna, which is non-stabilized physically to the local horizontal with x-configured beams, is considered. We consider the wind measurements by the DNS configured in the multi-beam scatterometer mode for a rectilinear flight scenario. The system feasibility and the efficiency of the proposed wind algorithm retrieval are supported by computer simulations. Finally, the associated limitations of the proposed approach are considered.

  15. Short term forecasting of surface layer wind speed using a continuous cascade model

    CERN Document Server

    Baile, Rachel; Poggi, Philippe

    2010-01-01

    This paper describes a statistical method for short-term forecasting of surface layer wind velocity amplitude relying on the notion of continuous cascades. Inspired by recent empirical findings that suggest the existence of some cascading process in the mesoscale range, we consider that wind speed can be described by a seasonal component and a fluctuating part represented by a "multifractal noise" associated with a random cascade. Performances of our model are tested on hourly wind speed series gathered at various locations in Corsica (France) and Netherlands. The obtained results show a systematic improvement of the prediction as compared to reference models like persistence or Artificial Neural Networks.

  16. Validation of sea surface temperature, wind speed and integrated water vapour from MSMR measurements. Project report

    Digital Repository Service at National Institute of Oceanography (India)

    Muraleedharan, P.M.

    and autonomous weather station) were utilized for measuring sea truth parameters such as sea surface temperature (SST), Sea Surface Wind Speed (WS) and Columnar Water Vapor (WV). Total match-ups for SST and WS measured from various platforms exceeded 1400 (2 hrs...

  17. A fast model for mean and turbulent wind characteristics over terrain with mixed surface roughness

    DEFF Research Database (Denmark)

    Astrup, P.; Mikkelsen, T.; Jensen, N.O.

    1997-01-01

    The real-time near-range atmospheric model chain in RODOS already includes the fast spectral LINCOM code, which was originally developed by Rise for modelling the mean wind fields over hilly, but otherwise homogeneous, terrain. Its output is used as a wind field driver for the dispersion model...... of arrival of radioactive clouds traversing, for instance, a land/water/land surface, and (2) for calculation of the turbulent shear stress, and thereby the scaling parameters, over mixed terrain....

  18. Remote Sensing of Sea Surface Wind of Hurricane Michael by GPS Reflected Signals

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    In this paper, the propagating geometry and the waveform of the GPS reflected signals are expatiated in detail. Furthermore, the principle and the method of retrieving sea surface wind are presented. In order to test the feasibility of retrieval, the experiment data obtained by NASA in Hurricane Michael are used. The result shows that the retrieval accuracy of wind speed is about 2 m/s.

  19. Effects of winds, tides and storm surges on ocean surface waves in the Sea of Japan

    Institute of Scientific and Technical Information of China (English)

    ZHAO Wei; TIAN Jiwei; LI Peiliang; HOU Yijun

    2007-01-01

    Ocean surface waves are strongly forced by high wind conditions associated with winter storms in the Sea of Japan. They are also modulated by tides and storm surges. The effects of the variability in surface wind forcing, tides and storm surges on the waves are investigated using a wave model, a high-resolution atmospheric mesoscale model and a hydrodynamic ocean circulation model. Five month-long wave model simulations are inducted to examine the sensitivity of ocean waves to various wind forcing fields, tides and storm surges during January 1997. Compared with observed mean wave parameters, results indicate that the high frequency variability in the surface wind filed has very great effect on wave simulation. Tides and storm surges have a significant impact on the waves in nearshores of the Tsushima-kaihyō, but not for other regions in the Sea of Japan. High spatial and temporal resolution and good quality surface wind products will be crucial for the prediction of surface waves in the JES and other marginal seas, especially near the coastal regions.

  20. Statistical downscaling of IPCC sea surface wind and wind energy predictions for U.S. east coastal ocean, Gulf of Mexico and Caribbean Sea

    Science.gov (United States)

    Yao, Zhigang; Xue, Zuo; He, Ruoying; Bao, Xianwen; Song, Jun

    2016-08-01

    A multivariate statistical downscaling method is developed to produce regional, high-resolution, coastal surface wind fields based on the IPCC global model predictions for the U.S. east coastal ocean, the Gulf of Mexico (GOM), and the Caribbean Sea. The statistical relationship is built upon linear regressions between the empirical orthogonal function (EOF) spaces of a cross- calibrated, multi-platform, multi-instrument ocean surface wind velocity dataset (predictand) and the global NCEP wind reanalysis (predictor) over a 10 year period from 2000 to 2009. The statistical relationship is validated before applications and its effectiveness is confirmed by the good agreement between downscaled wind fields based on the NCEP reanalysis and in-situ surface wind measured at 16 National Data Buoy Center (NDBC) buoys in the U.S. east coastal ocean and the GOM during 1992-1999. The predictand-predictor relationship is applied to IPCC GFDL model output (2.0°×2.5°) of downscaled coastal wind at 0.25°×0.25° resolution. The temporal and spatial variability of future predicted wind speeds and wind energy potential over the study region are further quantified. It is shown that wind speed and power would significantly be reduced in the high CO2 climate scenario offshore of the mid-Atlantic and northeast U.S., with the speed falling to one quarter of its original value.

  1. Surface Wind Vector and Rain Rate Observation Capability of Future Hurricane Imaging Radiometer (HIRAD)

    Science.gov (United States)

    Miller, Timothy; Atlas, Robert; Bailey, M. C.; Black, Peter; El-Nimri, Salem; Hood, Robbie; James, Mark; Johnson, James; Jones, Linwood; Ruf, Christopher; Uhlhorn, Eric

    2009-01-01

    The Hurricane Imaging Radiometer (HIRAD) is the next-generation Stepped Frequency Microwave Radiometer (SFMR), and it will offer the capability of simultaneous wide-swath observations of both extreme ocean surface wind vector and strong precipitation from either aircraft (including UAS) or satellite platforms. HIRAD will be a compact, lightweight, low-power instrument with no moving parts that will produce valid wind observations under hurricane conditions when existing microwave sensors (radiometers or scatterometers) are hindered by precipitation. The SFMR i s a proven aircraft remote sensing system for simultaneously observing extreme ocean surface wind speeds and rain rates, including those of major hurricane intensity. The proposed HIRAD instrument advances beyond the current nadir viewing SFMR to an equivalent wide-swath SFMR imager using passive microwave synthetic thinned aperture radiometer technology. The first version of the instrument will be a single polarization system for wind speed and rain rate, with a dual-polarization system to follow for wind vector capability. This sensor will operate over 4-7 GHz (C-band frequencies) where the required tropical cyclone remote sensing physics has been validated by both SFMR and WindSat radiometers. HIRAD incorporates a unique, technologically advanced array antenna and several other technologies successfully demonstrated by NASA s Instrument Incubator Program. A brassboard (laboratory) version of the instrument has been completed and successfully tested in a test chamber. Development of the aircraft instrument is underway, with flight testing planned for the fall of 2009. Preliminary Observing System Simulation Experiments (OSSEs) show that HIRAD will have a significant positive impact on surface wind analyses as either a new aircraft or satellite sensor. New off-nadir data collected in 2008 by SFMR that affirms the ability of this measurement technique to obtain wind speed data at non-zero incidence angle will

  2. Role of Surface Energy Exchange for Simulating Wind Turbine Inflow: A Case Study in the Southern Great Plains, USA

    OpenAIRE

    Sonia Wharton; Matthew Simpson; Jessica L. Osuna; Jennifer F. Newman; Biraud, Sebastien C.

    2014-01-01

    The Weather Research and Forecasting (WRF) model is used to investigate choice of land surface model (LSM) on the near surface wind profile, including heights reached by multi-megawatt (MW) wind turbines. Simulations of wind profiles and surface energy fluxes were made using five LSMs of varying degrees of sophistication in dealing with soil–plant–atmosphere feedbacks for the Department of Energy (DOE) Southern Great Plains (SGP) Atmospheric Radiation Measurement Program (ARM) Central Facili...

  3. CYGNSS Observations of Surface Wind Speeds in Oceanic Tropical and Extratropical Cyclones

    Science.gov (United States)

    Posselt, D. J.; Crespo, J.; Naud, C. M.

    2016-12-01

    The Cyclone Global Navigation Satellite System (CYGNSS) mission is the first of the new generation of NASA Earth Venture missions, and consists of a constellation of eight small satellites scheduled for launch in November 2016. The mission utilizes GPS signals reflected from the Earth's surface to infer near-surface wind speeds over the global tropical oceans. The eight-satellite constellation will observe ocean-surface wind speeds in all weather conditions (including in heavy precipitation) with a median revisit time of approximately 3 hours. While CYGNSS is designed to measure wind speeds in the inner core of tropical cyclones, it will observe near-surface winds over all oceanic regions within the span of its orbit. The orbit inclination is 35 degrees, which means that the satellite will observe primarily the tropics and sub-tropics; however, because the antennae are angled 28 degrees off-nadir, the effective range of latitudes spans -40 to 40 degrees. As such, CYGNSS will observe regions known to be characterized by rapid extratropical cyclone development (e.g., the southern portion of the Gulf Stream off the U.S. East Coast). In this presentation, we discuss CYGNSS sampling characteristics, with an eye toward its potential to observe winds not only in tropical cyclones, but in extratropical cyclones as well. We simulate orbits over a historical extratropical storm, and also utilize a multi-year database of cyclone centers to determine CYGNSS sampling characteristics integrated over many storms.

  4. A Study of DC Surface Plasma Discharge in Absence of Free Airflow: Ionic Wind Velocity Profile

    Directory of Open Access Journals (Sweden)

    M. Rafika

    2009-01-01

    Full Text Available In our study we are interested with the DC (Direct Current electric corona discharge created between two wire electrodes. We present experimental results related to some electroaerodynamic actuators based on the DC corona discharge at the surface of a dielectric material. We used different geometrical forms of dielectric surface such as a plate, a cylinder and a wing of aircraft of type NACA 0015. We present the current density-electric filed characteristics for different cases in order to determine the discharge regimes. The corona discharge produces non-thermal plasma so that it is called plasma discharge. Plasma discharge creates a tangential ionic wind above the surface at the vicinity of the wall. We have measured the ionic wind induced by the corona discharge in absence of free external airflow, we give the ionic wind velocity profiles for different surface forms and we compare the actuators effect based on the span of the ionic wind velocity values. We notice that the maximum ionic wind velocity is obtained with the NACA profile, which shows the effectiveness of this actuator for the airflow control.

  5. Micro-swimmer dynamics in free-surface turbulence subject to wind stress

    Science.gov (United States)

    Marchioli, Cristian; Lovecchio, Salvatore; Soldati, Alfredo

    2016-11-01

    We examine the effect of wind-induced shear on the orientation and distribution of motile micro-swimmers in free-surface turbulence. Winds blowing above the air-water interface can influence the distribution and productivity of motile organisms via the shear generated just below the surface. Swimmer dynamics depend not only by the advection of the fluid but also by external stimuli like nutrient concentration, light, gravity. Here we focus on gyrotaxis, resulting from the gravitational torque generated by an asymmetric mass distribution within the organism. The combination of such torque with the viscous torque due to shear can re-orient swimmers, reducing their vertical migration and causing entrapment in horizontal fluid layers. Through DNS-based Euler-Lagrangian simulations we investigate the effect of wind-induced shear on the motion of gyrotactic swimmers in turbulent open channel flow. We consider different wind directions and swimmers with different reo-rientation time (reflecting the ability to react to turbulent fluctuations). We show that only stable (high-gyrotaxis) swimmers may reach the surface and form densely concentrated filaments, the topology of which depends on the wind direction. Otherwise swimmers exhibit weaker vertical fluxes and segregation at the surface.

  6. Flight paths of seabirds soaring over the ocean surface enable measurement of fine-scale wind speed and direction.

    Science.gov (United States)

    Yonehara, Yoshinari; Goto, Yusuke; Yoda, Ken; Watanuki, Yutaka; Young, Lindsay C; Weimerskirch, Henri; Bost, Charles-André; Sato, Katsufumi

    2016-08-09

    Ocean surface winds are an essential factor in understanding the physical interactions between the atmosphere and the ocean. Surface winds measured by satellite scatterometers and buoys cover most of the global ocean; however, there are still spatial and temporal gaps and finer-scale variations of wind that may be overlooked, particularly in coastal areas. Here, we show that flight paths of soaring seabirds can be used to estimate fine-scale (every 5 min, ∼5 km) ocean surface winds. Fine-scale global positioning system (GPS) positional data revealed that soaring seabirds flew tortuously and ground speed fluctuated presumably due to tail winds and head winds. Taking advantage of the ground speed difference in relation to flight direction, we reliably estimated wind speed and direction experienced by the birds. These bird-based wind velocities were significantly correlated with wind velocities estimated by satellite-borne scatterometers. Furthermore, extensive travel distances and flight duration of the seabirds enabled a wide range of high-resolution wind observations, especially in coastal areas. Our study suggests that seabirds provide a platform from which to measure ocean surface winds, potentially complementing conventional wind measurements by covering spatial and temporal measurement gaps.

  7. Coastal Boundary Layer Characteristics of Wind, Turbulence, and Surface Roughness Parameter over the Thumba Equatorial Rocket Launching Station, India

    Directory of Open Access Journals (Sweden)

    K. V. S. Namboodiri

    2014-01-01

    Full Text Available The study discusses the features of wind, turbulence, and surface roughness parameter over the coastal boundary layer of the Peninsular Indian Station, Thumba Equatorial Rocket Launching Station (TERLS. Every 5 min measurements from an ultrasonic anemometer at 3.3 m agl from May 2007 to December 2012 are used for this work. Symmetries in mesoscale turbulence, stress off-wind angle computations, structure of scalar wind, resultant wind direction, momentum flux (M, Obukhov length (L, frictional velocity (u*, w-component, turbulent heat flux (H, drag coefficient (CD, turbulent intensities, standard deviation of wind directions (σθ, wind steadiness factor-σθ relationship, bivariate normal distribution (BND wind model, surface roughness parameter (z0, z0 and wind direction (θ relationship, and variation of z0 with the Indian South West monsoon activity are discussed.

  8. Entrainment of radio frequency chaff by wind as a function of surface aerodynamic roughness.

    Science.gov (United States)

    Gillies, John A; Nickling, William G

    2003-02-01

    Radio frequency (RF) chaff (approximately 2-cm x 25-microm diameter aluminum-coated glass silicate cylinders) released by military aircraft during testing and training activities has the potential to become entrained by wind upon settling to the Earth's surface. Once entrained from the surface there is the potential for RF chaff to be abraded and produce PM10 and PM2.5, which are regulated pollutants and pose health concerns. A series of portable wind tunnel tests were carried out to examine the propensity of RF chaff to become entrained by wind by defining the relationship between the threshold friction velocity of RF chaff (u(*t RF chaff)) and aerodynamic roughness (z(o)) of surfaces onto which it may deposit. The test surfaces were of varying roughness including types near the Naval Air Station (NAS), Fallon, NV, where RF chaff is released. The u(*t) of this fibrous material ranged from 0.14 m/sec for a smooth playa to 0.82 m/sec for a rough crusted playa surface with larger cobble-sized (approximately 6-26-cm diameter) rocks rising above the surface. The u(*t RF chaff) is dependent on the z(o) of the surface onto which it falls as well as the physical characteristics of the roughness. The wind regime of Fallon would allow for chaff suspension events to occur should it settle on typical surfaces in the area. However, the wind climatology of this area makes the probability of such events relatively low.

  9. Quality Control Methodology Of A Surface Wind Observational Database In North Eastern North America

    Science.gov (United States)

    Lucio-Eceiza, Etor E.; Fidel González-Rouco, J.; Navarro, Jorge; Conte, Jorge; Beltrami, Hugo

    2016-04-01

    This work summarizes the design and application of a Quality Control (QC) procedure for an observational surface wind database located in North Eastern North America. The database consists of 526 sites (486 land stations and 40 buoys) with varying resolutions of hourly, 3 hourly and 6 hourly data, compiled from three different source institutions with uneven measurement units and changing measuring procedures, instrumentation and heights. The records span from 1953 to 2010. The QC process is composed of different phases focused either on problems related with the providing source institutions or measurement errors. The first phases deal with problems often related with data recording and management: (1) compilation stage dealing with the detection of typographical errors, decoding problems, site displacements and unification of institutional practices; (2) detection of erroneous data sequence duplications within a station or among different ones; (3) detection of errors related with physically unrealistic data measurements. The last phases are focused on instrumental errors: (4) problems related with low variability, placing particular emphasis on the detection of unrealistic low wind speed records with the help of regional references; (5) high variability related erroneous records; (6) standardization of wind speed record biases due to changing measurement heights, detection of wind speed biases on week to monthly timescales, and homogenization of wind direction records. As a result, around 1.7% of wind speed records and 0.4% of wind direction records have been deleted, making a combined total of 1.9% of removed records. Additionally, around 15.9% wind speed records and 2.4% of wind direction data have been also corrected.

  10. Super-Eddington stellar winds driven by near-surface energy deposition

    Science.gov (United States)

    Quataert, Eliot; Fernández, Rodrigo; Kasen, Daniel; Klion, Hannah; Paxton, Bill

    2016-05-01

    We develop analytic and numerical models of the properties of super-Eddington stellar winds, motivated by phases in stellar evolution when super-Eddington energy deposition (via, e.g. unstable fusion, wave heating, or a binary companion) heats a region near the stellar surface. This appears to occur in the giant eruptions of luminous blue variables (LBVs), Type IIn supernovae progenitors, classical novae, and X-ray bursts. We show that when the wind kinetic power exceeds Eddington, the photons are trapped and behave like a fluid. Convection does not play a significant role in the wind energy transport. The wind properties depend on the ratio of a characteristic speed in the problem v_crit˜ (dot{E} G)^{1/5} (where dot{E} is the heating rate) to the stellar escape speed near the heating region vesc(rh). For vcrit ≳ vesc(rh), the wind kinetic power at large radii dot{E}_w ˜ dot{E}. For vcrit ≲ vesc(rh), most of the energy is used to unbind the wind material and thus dot{E}_w ≲ dot{E}. Multidimensional hydrodynamic simulations without radiation diffusion using FLASH and one-dimensional hydrodynamic simulations with radiation diffusion using MESA are in good agreement with the analytic predictions. The photon luminosity from the wind is itself super-Eddington but in many cases the photon luminosity is likely dominated by `internal shocks' in the wind. We discuss the application of our models to eruptive mass-loss from massive stars and argue that the wind models described here can account for the broad properties of LBV outflows and the enhanced mass-loss in the years prior to Type IIn core-collapse supernovae.

  11. Retrieval of sea surface winds under hurricane conditions from GNSS-R observations

    Institute of Scientific and Technical Information of China (English)

    JING Cheng; YANG Xiaofeng; MA Wentao; YU Yang; DONG Di; LI Ziwei; XU Cong

    2016-01-01

    Reflected signals from global navigation satellite systems (GNSSs) have been widely acknowledged as an important remote sensing tool for retrieving sea surface wind speeds. The power of GNSS reflectometry (GNSS-R) signals can be mapped in delay chips and Doppler frequency space to generate delay Doppler power maps (DDMs), whose characteristics are related to sea surface roughness and can be used to retrieve wind speeds. However, the bistatic radar cross section (BRCS), which is strongly related to the sea surface roughness, is extensively used in radar. Therefore, a bistatic radar cross section (BRCS) map with a modified BRCS equation in a GNSS-R application is introduced. On the BRCS map, three observables are proposed to represent the sea surface roughness to establish a relationship with the sea surface wind speed. Airborne Hurricane Dennis (2005) GNSS-R data are then used. More than 16 000 BRCS maps are generated to establish GMFs of the three observables. Finally, the proposed model and classic one-dimensional delay waveform (DW) matching methods are compared, and the proposed model demonstrates a better performance for the high wind speed retrievals.

  12. Mesoscale Near-Surface Wind Speed Variability Mapping with Synthetic Aperture Radar.

    Science.gov (United States)

    Young, George; Sikora, Todd; Winstead, Nathaniel

    2008-11-05

    Operationally-significant wind speed variability is often observed within synthetic aperture radar-derived wind speed (SDWS) images of the sea surface. This paper is meant as a first step towards automated distinguishing of meteorological phenomena responsible for such variability. In doing so, the research presented in this paper tests feature extraction and pixel aggregation techniques focused on mesoscale variability of SDWS. A sample of twenty eight SDWS images possessing varying degrees of near-surface wind speed variability were selected to serve as case studies. Gaussian high- and low-pass, local entropy, and local standard deviation filters performed well for the feature extraction portion of the research while principle component analysis of the filtered data performed well for the pixel aggregation. The findings suggest recommendations for future research.

  13. Estimating Sea Surface Salinity and Wind Using Combined Passive and Active L-Band Microwave Observations

    Science.gov (United States)

    Yueh, Simon H.; Chaubell, Mario J.

    2012-01-01

    Several L-band microwave radiometer and radar missions have been, or will be, operating in space for land and ocean observations. These include the NASA Aquarius mission and the Soil Moisture Active Passive (SMAP) mission, both of which use combined passive/ active L-band instruments. Aquarius s passive/active L-band microwave sensor has been designed to map the salinity field at the surface of the ocean from space. SMAP s primary objectives are for soil moisture and freeze/thaw detection, but it will operate continuously over the ocean, and hence will have significant potential for ocean surface research. In this innovation, an algorithm has been developed to retrieve simultaneously ocean surface salinity and wind from combined passive/active L-band microwave observations of sea surfaces. The algorithm takes advantage of the differing response of brightness temperatures and radar backscatter to salinity, wind speed, and direction, thus minimizing the least squares error (LSE) measure, which signifies the difference between measurements and model functions of brightness temperatures and radar backscatter. The algorithm uses the conjugate gradient method to search for the local minima of the LSE. Three LSE measures with different measurement combinations have been tested. The first LSE measure uses passive microwave data only with retrieval errors reaching 1 to 2 psu (practical salinity units) for salinity, and 1 to 2 m/s for wind speed. The second LSE measure uses both passive and active microwave data for vertical and horizontal polarizations. The addition of active microwave data significantly improves the retrieval accuracy by about a factor of five. To mitigate the impact of Faraday rotation on satellite observations, the third LSE measure uses measurement combinations invariant under the Faraday rotation. For Aquarius, the expected RMS SSS (sea surface salinity) error will be less than about 0.2 psu for low winds, and increases to 0.3 psu at 25 m/s wind speed

  14. Field and numerical study of wind and surface waves at short fetches

    Science.gov (United States)

    Baydakov, Georgy; Kuznetsova, Alexandra; Sergeev, Daniil; Papko, Vladislav; Kandaurov, Alexander; Vdovin, Maxim; Troitskaya, Yuliya

    2016-04-01

    Measurements were carried out in 2012-2015 from May to October in the waters of Gorky Reservoir belonging to the Volga Cascade. The methods of the experiment focus on the study of airflow in the close proximity to the water surface. The sensors were positioned at the oceanographic Froude buoy including five two-component ultrasonic sensors WindSonic by Gill Instruments at different levels (0.1, 0.85, 1.3, 2.27, 5.26 meters above the mean water surface level), one water and three air temperature sensors, and three-channel wire wave gauge. One of wind sensors (0.1 m) was located on the float tracking the waveform for measuring the wind speed in the close proximity to the water surface. Basic parameters of the atmospheric boundary layer (the friction velocity u∗, the wind speed U10 and the drag coefficient CD) were calculated from the measured profiles of wind speed. Parameters were obtained in the range of wind speeds of 1-12 m/s. For wind speeds stronger than 4 m/s CD values were lower than those obtained before (see eg. [1,2]) and those predicted by the bulk parameterization. However, for weak winds (less than 3 m/s) CD values considerably higher than expected ones. The new parameterization of surface drag coefficient was proposed on the basis of the obtained data. The suggested parameterization of drag coefficient CD(U10) was implemented within wind input source terms in WAVEWATCH III [3]. The results of the numerical experiments were compared with the results obtained in the field experiments on the Gorky Reservoir. The use of the new drag coefficient improves the agreement in significant wave heights HS [4]. At the same time, the predicted mean wave periods are overestimated using both built-in source terms and adjusted source terms. We associate it with the necessity of the adjusting of the DIA nonlinearity model in WAVEWATCH III to the conditions of the middle-sized reservoir. Test experiments on the adjusting were carried out. The work was supported by the

  15. Projected changes to surface wind characteristics and extremes over North America in CRCM5

    Science.gov (United States)

    Jeong, Dae Il; Sushama, Laxmi

    2017-04-01

    Changes in the tendency of wind speed and direction have significant implications for long-term water cycle, air pollution, arid and semiarid environments, fire activity, and wind energy production. Furthermore, changes in wind extremes have direct impacts on buildings, infrastructures, agriculture, power lines, and trees. This study evaluates projected changes to wind speed characteristics (i.e., seasonal and annual mean, seasonal and diurnal cycles, directional distribution, and extreme events) for the future 2071-2100 period, with respect to the current 1981-2010 period over North America, using four different simulations from the fifth-generation Canadian Regional Climate Model (CRCM5) with two driving GCMs under RCP (Representative Concentration Pathways) 4.5 and 8.5 scenarios. The CRCM5 simulates the climatology of mean sea level pressure gradient and associated wind direction over North America well when compared to ERA-Interim reanalysis dataset. The CRCM5 also reproduces properly the spatial distributions of observed seasonal and annual mean wind speeds obtained from 611 meteorological stations across North America. The CRCM5 simulations generally suggest an increase in future mean wind speed for northern and eastern parts of Canada, due to a decrease of future mean sea level pressure and more intense low pressure air circulation systems already situated in those regions such as Aleutian and Icelandic Lows. Projected changes to annual maximum wind speed show more spatial variability compared to seasonal and annual mean wind speed as extreme wind speed is influenced more by regional-scale features associated with instantaneous surface temperature and air pressure gradients. The CRCM5 simulations suggest some increases in the future 50-year return levels of wind speed, mainly due to changes in the inter-annual variability of annual maximum wind speed. However, the projected changes vary in spatial pattern with the driving GCM fields and emission scenarios

  16. Super-Eddington Stellar Winds Driven by Near-Surface Energy Deposition

    CERN Document Server

    Quataert, Eliot; Kasen, Daniel; Klion, Hannah; Paxton, Bill

    2015-01-01

    We develop analytic and numerical models of the properties of super-Eddington stellar winds, motivated by phases in stellar evolution when super-Eddington energy deposition (via, e.g., unstable fusion, wave heating, or a binary companion) heats a region near the stellar surface. This appears to occur in luminous blue variables (LBVs), Type IIn supernovae progenitors, classical novae, and X-ray bursts. We show that when the wind kinetic power exceeds Eddington, the photons are trapped and behave like a fluid. Convection does not play a significant role in the wind energy transport. The wind properties depend on the ratio of a characteristic speed in the problem vc ~ (Edot G)^{1/5} (where Edot is the heating rate) to the stellar escape speed near the heating region vesc(r_h). For vc > vesc(r_h) the wind kinetic power at large radii Edot_w ~ Edot. For vc < vesc(r_h), most of the energy is used to unbind the wind material and thus Edot_w < Edot. Multidimensional hydrodynamic simulations without radiation di...

  17. Correlation between dust events in Mongolia and surface wind and precipitation

    Directory of Open Access Journals (Sweden)

    Ganbat Amgalan

    2017-01-01

    Full Text Available This study presents dust event spatiotemporal distribution and regional trends, and the impact of surface wind and precipitation on dust occurrences in Mongolia. We used data collected between 2000 and 2013 from 113 meteorological stations in natural forest steppe, steppe, Gobi Desert, and mountain zones. We analyzed the relationship between dusty days, derived using the sum of days with dust storms and/or drifting dust, and days with strong winds (at a threshold wind speed of a constant 6.5 m s-1, hereafter, strong wind days and precipitation by comparing the dusty days in dust-frequent years, dust-less years, and dust-mean years. Dusty days in dust-frequent years were associated with strong wind days when the precipitation is about 10 mm and dust occurrences were suppressed by large amounts of precipitation (approximately 22 mm in dust-less years over the southeastern part of the Gobi Desert in May. We propose a potential dust index (PDI based on the correlations among dusty days, strong winds and precipitation. The PDI performed as predicted in most areas of the country in the spring season.

  18. Quantifying the impact of sub-grid surface wind variability on sea salt and dust emissions in CAM5

    OpenAIRE

    Zhang, Kai; Zhao, Chun; Wan, Hui; Qian, Yun; Easter, Richard C.; Ghan, Steven J; Sakaguchi, Koichi; LIU, Xiaohong

    2016-01-01

    This paper evaluates the impact of sub-grid variability of surface wind on sea salt and dust emissions in the Community Atmosphere Model version 5 (CAM5). The basic strategy is to calculate emission fluxes multiple times, using different wind speed samples of a Weibull probability distribution derived from model-predicted grid-box mean quantities. In order to derive the Weibull distribution, the sub-grid standard deviation of surface wind speed is estimated by taking into ac...

  19. Conceptions of Tornado Wind Speed and Land Surface Interactions among Undergraduate Students in Nebraska

    Science.gov (United States)

    Van Den Broeke, Matthew S.; Arthurs, Leilani

    2015-01-01

    To ascertain novice conceptions of tornado wind speed and the influence of surface characteristics on tornado occurrence, 613 undergraduate students enrolled in introductory science courses at a large state university in Nebraska were surveyed. Our findings show that students lack understanding of the fundamental concepts that (1) tornadoes are…

  20. Simulation of an Underwater Acoustic Communication Channel Characterized by Wind-Generated Surface Waves and Bubbles

    NARCIS (Netherlands)

    Dol, H.S.; Ainslie, M.A.; Colin, M.E.G.D.; Janmaat, J.

    2012-01-01

    Sea surface scattering by wind-generated waves and bubbles is regarded to be the main nonplatform-related cause of the time variability of shallow acoustic communication channels. Simulations for predicting the quality of acoustic communication links in such channels thus require adequate modelling

  1. Simulation of an Underwater Acoustic Communication Channel Characterized by Wind-Generated Surface Waves and Bubbles

    NARCIS (Netherlands)

    Dol, H.S.; Colin, M.E.G.D.; Ainslie, M.A.; Walree, P.A. van; Janmaat, J.

    2013-01-01

    Abstract—Sea-surface scattering by wind-generated waves and bubbles is regarded to be the main nonplatform related cause of the time variability of shallow acoustic communication channels. Simulations for predicting the quality of acoustic communication links in such channels thus require adequate m

  2. Simulation of an Underwater Acoustic Communication Channel Characterized by Wind-Generated Surface Waves and Bubbles

    NARCIS (Netherlands)

    Dol, H.S.; Colin, M.E.G.D.; Ainslie, M.A.; Walree, P.A. van; Janmaat, J.

    2012-01-01

    Sea surface scattering by wind-generated waves and bubbles is regarded to be the main non-platform related cause of the time variability of shallow acoustic communication channels. Simulations for predicting the quality of acoustic communication links in such channels thus require adequate modeling

  3. Optimizing Surface Winds using QuikSCAT Measurements in the Mediterranean Sea During 2000-2006

    Science.gov (United States)

    2009-02-28

    r.com/ locate / jmarsysOptimizing surface winds using QuikSCAT measurements in the Mediterranean Sea during 2000–2006 A. Birol Kara a,⁎, Alan J...flux algorithms. J. Geophys. Res. 113, C04009. doi:10.1029/2007JC004324. Large, W.G., Danabasoglu, G., Doney, S.C., McWilliams , J.C., 1997

  4. Lightning attachment to wind turbine surfaces affected by internal blade conditions

    DEFF Research Database (Denmark)

    Garolera, Anna Candela; Holboell, Joachim; Madsen, Soren Find

    2012-01-01

    on the blade surface instead of the receptor is also possible, with the risk of damages in the composite structure as a consequence. The present paper focuses on electrical fields and streamer activity in connection to conductive components inside a wind turbine blade when a downward leader is approaching...

  5. Evaporation of HD Droplets From Nonporous, Inert Surfaces in TGA Microbalance Wind Tunnels

    Science.gov (United States)

    2008-09-01

    2007 4. TITLE AND SUBTITLE Evaporation of HD Droplets from Nonporous, Inert Surfaces in TGA Microbalancc Wind Tunnels 5a. CONTRACT NUMBER DAAD13...hr (lightly swirled on a rotating plateau). Then, the glass was rinsed with dematerialized water and dried (using appropriate fat-free non-felting

  6. Experiment about Drag Reduction of Bionic Non-smooth Surface in Low Speed Wind Tunnel

    Institute of Scientific and Technical Information of China (English)

    Tian Li-mei; Ren Lu-quan; Han Zhi-wu; Zhang Shi-cun

    2005-01-01

    The body surface of some organisms has non-smooth structure, which is related to drag reduction in moving fluid. To imitate these structures, models with a non-smooth surface were made. In order to find a relationship be tween drag reduction and the non-smooth surface, an orthogonal design test was employed in a low speed wind tunnel. Six factors likely to influence drag reduction were considered, and each factor tested at three levels. The six factors were the configuration, diameter/bottom width, height/depth, distribution, the arrangement of the rough structures on the experimental model and the wind speed. It was shown that the non-smooth surface causes drag reduction and the distribution of non-smooth structures on the model, and wind speed, are the predominant factors affecting drag reduction. Using analysis of variance, the optimal combination and levels were obtained, which were a wind speed of 44 m/s, distribution of the non-smooth structure on the tail of the experimental model, the configuration of riblets, diameter/bottom width of 1 mm, height/depth of 0.5 mm, arranged in a rhombic formation. At the optimal combination mentioned above, the 99% confidence interval for drag reduction was 11.13 % to 22.30%.

  7. Simulation of an Underwater Acoustic Communication Channel Characterized by Wind-Generated Surface Waves and Bubbles

    NARCIS (Netherlands)

    Dol, H.S.; Ainslie, M.A.; Colin, M.E.G.D.; Janmaat, J.

    2012-01-01

    Sea surface scattering by wind-generated waves and bubbles is regarded to be the main nonplatform-related cause of the time variability of shallow acoustic communication channels. Simulations for predicting the quality of acoustic communication links in such channels thus require adequate modelling

  8. Simulation of an Underwater Acoustic Communication Channel Characterized by Wind-Generated Surface Waves and Bubbles

    NARCIS (Netherlands)

    Dol, H.S.; Colin, M.E.G.D.; Ainslie, M.A.; Walree, P.A. van; Janmaat, J.

    2013-01-01

    Abstract—Sea-surface scattering by wind-generated waves and bubbles is regarded to be the main nonplatform related cause of the time variability of shallow acoustic communication channels. Simulations for predicting the quality of acoustic communication links in such channels thus require adequate m

  9. Simulation of an Underwater Acoustic Communication Channel Characterized by Wind-Generated Surface Waves and Bubbles

    NARCIS (Netherlands)

    Dol, H.S.; Colin, M.E.G.D.; Ainslie, M.A.; Walree, P.A. van; Janmaat, J.

    2012-01-01

    Sea surface scattering by wind-generated waves and bubbles is regarded to be the main non-platform related cause of the time variability of shallow acoustic communication channels. Simulations for predicting the quality of acoustic communication links in such channels thus require adequate modeling

  10. The Impact of Sea-Surface Winds on Meteorological Conditions in Israel: An Initial Study

    Science.gov (United States)

    Otterman, J.; Saaroni, H.; Atlas, R.; Ardizzone, J.; Ben-Dor, E.; Druyan, L.; Jusem, C. J.; Karnieli, A.; Terry, J.

    2000-01-01

    The SSM/I (Spectral Sensor Microwave Imager) dataset is used to monitor surface wind speed and direction at four locations over the Eastern Mediterranean during December 1998 - January 1999. Time series of these data are compared to concurrent series of precipitation, surface temperature, humidity and winds at selected Israeli stations: Sde Dov (coastal), Bet Dagan (5 km. inland), Jerusalem (Judean Hills), Hafetz Haim (3 km. inland) and Sde Boker (central Negev). December 1998 and the beginning of January 1999 were dry in Israel, but significant precipitation was recorded at many stations during the second half of January (1999). SSM/I data show a surge in westerly surface winds west of Israel (32 N, 32.5 E) on 15 January, coinciding with the renewal of precipitation. We discuss the relevant circulation and pressure patterns during this transition in the context of the evolving meteorological conditions at the selected Israeli locations. The SSM/I dataset of near ocean surface winds, available for the last 12 years, is described. We analyze lagged correlation between these data and the Israeli station data and investigate possibility of predictive skill. Application of such relationships to short-term weather prediction would require real-time access to the SSM/I observations.

  11. Impact of non-uniform surface magnetic fields on stellar winds

    CERN Document Server

    Holzwarth, V R

    2005-01-01

    Observations of active stars reveal highly non-uniform surface distributions of magnetic flux. Theoretical models considering magnetised stellar winds however often presume uniform surface magnetic fields, characterised by a single magnetic field strength. The present work investigates the impact of non-uniform surface magnetic field distributions on the stellar mass and angular momentum loss rates. The approach of Weber & Davis (1967) is extended to non-equatorial latitudes to quantify the impact of latitude-dependent magnetic field distributions over a large range of stellar rotation rates and thermal wind properties. The analytically prescribed field patterns are dominated by magnetic flux concentrations at intermediate and high latitudes. The global stellar mass loss rates are found to be rather insensitive to non-uniformities of the surface magnetic field. Depending on the non-uniformity of the field distribution, the angular momentum loss rates deviate in contrast at all rotation rates between -60% ...

  12. Using Surface Pressure To Improve Tropical Cyclone /Surface Wind Retrievals From SAR

    Science.gov (United States)

    2012-03-19

    Jochen Horstmann of NATO Undersea Research Centre ( NURC ). GD and NURC have developed separate methods for estimating wind directions. The GD and NURC ...Working version of SLP retrieval code, including necessary PBL model developments, that is compatible with GD, NURC and WiSAR file formats (as well as for...installed at NURC and we have been experimenting with Horstmann to determine if it can (or should) be included as an integrated part of the NURC SAR wind

  13. Evaluation of ENVISAT ASAR data for sea surface wind retrieval in Hong Kong coastal waters of China

    Institute of Scientific and Technical Information of China (English)

    XU Qing; LIN Hui; ZHENG Quanan; XIU Peng; CHENG Yongcun; LIU Yuguang

    2008-01-01

    The C-band wind speed retrieval models,CMOD4,CMOD-IFR2,and CMODS were applied to retrieval of sea surface wind speeds from ENVISAT(European environmental satellite)ASAR(advanced synthetic aperture radar)data in the coastal waters near Hang Kong during a period from October 2005 to July 2007.The retrieved wind speeds are evaluated by comparing with buoy measurements and the QuikSCAT(quick scatterometer)wind products.The results show that the CMOD4 model gives the best performance at wind speeds lower than 15 m/s.The correlation coefficients with buoy and QuikSCAT winds are 0.781 and 0.896,respectively.The root mean square errors are the same 1.74m/s.Namely,the CMOD4 model is the best one for sea surface wind speed retrieval from ASAR data in the COastal waters near Hong Kong.

  14. CYGNSS Spaceborne Constellation for Ocean Surface Winds: Mission Design and Sampling Properties

    Science.gov (United States)

    Ruf, Chris; Ridley, Aaron; Clarizia, Maria Paola; Gleason, Scott; Rose, Randall; Scherrer, John

    2014-05-01

    The NASA Earth Venture Cyclone Global Navigation Satellite System (CYGNSS) is a spaceborne mission scheduled to launch in October 2016 that is focused on tropical cyclone (TC) inner core process studies. CYGNSS is specifically designed to address the inadequacy in observations of the inner core that result from two causes: 1) much of the inner core ocean surface is obscured from conventional remote sensing instruments by intense precipitation in the eye wall and inner rain bands; and 2) the rapidly evolving (genesis and intensification) stages of the TC life cycle are poorly sampled in time by conventional polar-orbiting, wide-swath surface wind imagers. CYGNSS measurements of bistatic radar cross section of the ocean can be directly related to the near surface wind speed, in a manner roughly analogous to that of conventional ocean wind scatterometers. The technique has been demonstrated previously from space by the UK-DMC mission in 2005-6. CYGNSS will advance the wind measuring capability demonstrated by the experimental payload on UK-DMC to a more mature ocean science mission. The CYGNSS constellation is comprised of 8 observatories in 500 km circular orbits at a common inclination angle of 35°. Each observatory contains a Delay Doppler Mapping Instrument (DDMI) which consists of a multi-channel GPS receiver, a low gain zenith antenna and two high gain nadir antennas. Each DDMI measures simultaneous specular scattered signals from the 4 GPS transmitters with the highest probable signal-to-noise ratio. The receivers coherently integrate the received signals for 1 ms, then incoherently integrate on board for an additional one second. This results in 32 wind measurements per second. CYGNSS has spatial and temporal sampling properties that are distinctly different from conventional wide-swath polar imagers. Spatial sampling is marked by 32 simultaneous single pixel "swaths" that are 25 km wide and, typically, 100s of km long. They can be considered roughly

  15. Intensification of aerosol pollution associated with its feedback with surface solar radiation and winds in Beijing

    Science.gov (United States)

    Yang, Xin; Zhao, Chuanfeng; Guo, Jianping; Wang, Yang

    2016-04-01

    Beijing has been experiencing serious air pollution in recent years, resulting in serious impacts on the local environment and climate and on human health. In addition to individual pollution sources and weather systems, feedback between aerosols and downwelling solar radiation (DSR) and between aerosols and winds also contribute to heavy aerosol pollution. By using atmospheric visibility (VIS) to represent the relative amount of aerosol pollution during a 5 week observation around the Asia-Pacific Economic Cooperation (APEC) period (22 October to 25 November 2014) over a site in south Beijing, China, we show clear positive relationships between DSR and VIS and between winds and VIS. The sensitivities of daily DSR and surface winds to VIS are approximately 15.42 W/m2/km and 0.068 m/s/km, respectively. The strengthening contributions to atmospheric visibility by surface DSR-VIS interactions and between surface wind-aerosol interactions are estimated at approximately 15% and 12%, respectively, in south Beijing around the APEC period.

  16. Solar Wind Sputtering of Lunar Surface Materials: Role and Some Possible Implications of Potential Sputtering

    Science.gov (United States)

    Barghouty, A. F.; Adams, J. H., Jr.; Meyer, F.; Reinhold, c.

    2010-01-01

    Solar-wind induced sputtering of the lunar surface includes, in principle, both kinetic and potential sputtering. The role of the latter mechanism, however, in many focused studies has not been properly ascertained due partly to lack of data but can also be attributed to the assertion that the contribution of solar-wind heavy ions to the total sputtering is quite low due to their low number density compared to solar-wind protons. Limited laboratory measurements show marked enhancements in the sputter yields of slow-moving, highly-charged ions impacting oxides. Lunar surface sputtering yields are important as they affect, e.g., estimates of the compositional changes in the lunar surface, its erosion rate, as well as its contribution to the exosphere as well as estimates of hydrogen and water contents. Since the typical range of solar-wind ions at 1 keV/amu is comparable to the thickness of the amorphous rim found on lunar soil grains, i.e. few 10s nm, lunar simulant samples JSC-1A AGGL are specifically enhanced to have such rims in addition to the other known characteristics of the actual lunar soil particles. However, most, if not all laboratory studies of potential sputtering were carried out in single crystal targets, quite different from the rim s amorphous structure. The effect of this structural difference on the extent of potential sputtering has not, to our knowledge, been investigated to date.

  17. Error estimates for ocean surface winds: Applying Desroziers diagnostics to the Cross-Calibrated, Multi-Platform analysis of wind speed

    Science.gov (United States)

    Hoffman, Ross N.; Ardizzone, Joseph V.; Leidner, S. Mark; Smith, Deborah K.; Atlas, Robert M.

    2013-04-01

    The cross-calibrated, multi-platform (CCMP) ocean surface wind project [Atlas et al., 2011] generates high-quality, high-resolution, vector winds over the world's oceans beginning with the 1987 launch of the SSM/I F08, using Remote Sensing Systems (RSS) microwave satellite wind retrievals, as well as in situ observations from ships and buoys. The variational analysis method [VAM, Hoffman et al., 2003] is at the center of the CCMP project's analysis procedures for combining observations of the wind. The VAM was developed as a smoothing spline and so implicitly defines the background error covariance by means of several constraints with adjustable weights, and does not provide an explicit estimate of the analysis error. Here we report on our research to develop uncertainty estimates for wind speed for the VAM inputs and outputs, i.e., for the background (B), the observations (O) and the analysis (A) wind speed, based on the Desroziers et al. [2005] diagnostics (DD hereafter). The DD are applied to the CCMP ocean surface wind data sets to estimate wind speed errors of the ECMWF background, the microwave satellite observations and the resulting CCMP analysis. The DD confirm that the ECMWF operational surface wind speed error standard deviations vary with latitude in the range 0.7-1.5 m/s and that the cross-calibrated Remote Sensing Systems (RSS) wind speed retrievals standard deviations are in the range 0.5-0.8 m/s. Further the estimated CCMP analysis wind speed standard deviations are in the range 0.2-0.4 m/s. The results suggests the need to revise the parameterization of the errors due to the FGAT (first guess at the appropriate time) procedure. Errors for wind speeds S. M. Leidner, J. C. Jusem, D. K. Smith, and D. Gombos, A cross-calibrated, multi-platform ocean surface wind velocity product for meteorological and oceanographic applications, Bull. Am. Meteorol. Soc., 92, 157-174, 2011, doi:10.1175/2010BAMS2946.1. Desroziers, G., L. Berre, B. Chapnik, and P. Poli

  18. Intercomparison of Several Ocean Surface Wind Products over the Nordic Seas

    Science.gov (United States)

    Dukhovskoy, Dmitry; Bourassa, Mark

    2014-05-01

    Surface winds are one of the key parameters that control the exchange of energy between the atmosphere and oceans. Being the major source of momentum for the upper ocean, winds mainly control ocean processes and air-sea interaction especially in synoptically active regions such as the Nordic Seas (Greenland, Norwegian, Iceland, and Barents Seas). Intense formation of water masses takes place in the Nordic Seas through cooling, brine rejection, and mixing of Arctic Ocean and North Atlantic waters. Deep water produced in this region by deep convection participates in the Atlantic Meridional Overturning Circulation. Water masses formed in the Nordic Seas are also important for the maintenance of thermohaline structure of the Arctic Ocean. The Nordic Seas has always been a challenging region for Arctic Ocean modeling due to complex ocean circulation, water mass transformation, intense air-sea interaction, deep vertical convection, etc. The lack of reliable high-resolution wind products over the Polar region is another factor that has been impacting modeling of the Arctic Ocean in general and the Nordic Seas in particular. Coarse resolution atmospheric fields are often used to force the Arctic Ocean models. The major drawback of the coarse resolution wind products is their inability to resolve small- and meso-scale cyclones frequently impacting the Nordic Seas. Several gridded surface wind products derived from scatterometer wind observations have reasonably high spatial resolution to represent most of the small scale cyclones in the region. In the present model study, Cross-Calibrated Multi-Platform surface wind data (CCMP) are compared against the wind fields from traditional the NCEP/NCAR Reanalysis 2 (NCEPR), from NCEP Climate Forecast System Reanalysis (CFSR), and from the interium version (30km) of the Arctic System Reanalysis (ASR). The NCEPR is a coarse resolution product (1.9°) and still is the primary source of forcing fields for the Arctic Ocean models. The

  19. Solar wind interaction with the Reiner Gamma crustal magnetic anomaly: Connecting source magnetization to surface weathering

    Science.gov (United States)

    Poppe, Andrew R.; Fatemi, Shahab; Garrick-Bethell, Ian; Hemingway, Doug; Holmström, Mats

    2016-03-01

    Remanent magnetization has long been known to exist in the lunar crust, yet both the detailed topology and ultimate origin(s) of these fields remains uncertain. Some crustal magnetic fields coincide with surface albedo anomalies, known as lunar swirls, which are thought to be formed by differential surface weathering of the regolith underlying crustal fields due to deflection of incident solar wind protons. Here, we present results from a three-dimensional, self-consistent, plasma hybrid model of the solar wind interaction with two different possible source magnetizations for the Reiner Gamma anomaly. We characterize the plasma interaction with these fields and the resulting spatial distribution of charged-particle weathering of the surface and compare these results to optical albedo measurements of Reiner Gamma. The model results constrain the proposed source magnetizations for Reiner Gamma and suggest that vertical crustal magnetic fields are required to produce the observed "dark lanes."

  20. Simulation of rotor aerodynamics : use of the actuator surface method to model the MEXICO wind turbine

    Energy Technology Data Exchange (ETDEWEB)

    Breton, S.P.; Watters, C.S.; Masson, C. [Ecole de Technologie Superieure, Montreal, PQ (Canada)

    2010-07-01

    This presentation discussed the model rotor experiments under controlled conditions (MEXICO) project. The experiments are being conducted in the largest wind tunnel in Europe in order to determine optimal yaw and pitch angles for wind turbines as well as to test the performance of blade aerodynamic profiles and rotor instrumentation. Data obtained during the experiments are used to determine velocity component points in order to develop a greater understanding of wind turbine aerodynamics and improve calculation methods. Blade element momentum (BEM) computational fluid dynamics (CFD) and vortex wake codes are used in the program, which includes an actuator surface method embedded in a customized CFD finite element method. To date, the project has validated various models with experimental data, and mapped the induced velocities upwind and downwind from rotors. Further research is being conducted to compare experimental results with other results in the literature related to blade loading, root bending moments, and detailed flow characteristics. Charts of experimental results were included. tabs., figs.

  1. Wind enhances differential air advection in surface snow at sub-meter scales

    Science.gov (United States)

    Drake, Stephen A.; Selker, John S.; Higgins, Chad W.

    2017-09-01

    Atmospheric pressure gradients and pressure fluctuations drive within-snow air movement that enhances gas mobility through interstitial pore space. The magnitude of this enhancement in relation to snow microstructure properties cannot be well predicted with current methods. In a set of field experiments, we injected a dilute mixture of 1 % carbon monoxide (CO) and nitrogen gas (N2) of known volume into the topmost layer of a snowpack and, using a distributed array of thin film sensors, measured plume evolution as a function of wind forcing. We found enhanced dispersion in the streamwise direction and also along low-resistance pathways in the presence of wind. These results suggest that atmospheric constituents contained in snow can be anisotropically mixed depending on the wind environment and snow structure, having implications for surface snow reaction rates and interpretation of firn and ice cores.

  2. Effect of wind turbine wakes on cropland surface fluxes in the US Great Plains during a Nocturnal Low Level Jet

    Science.gov (United States)

    Rhodes, M. E.; Aitken, M.; Lundquist, J. K.; Takle, E. S.; Prueger, J. H.

    2010-12-01

    Installation of large scale wind farms is becoming a common operation in the Midwest, and wind farms frequently are situated among fields of agricultural crops. Each wind turbine is known to alter the behavior of the air mass downwind of the rotor; consequently, the rotor wakes alter the local microclimate. Quantification of the effects of wind turbine wakes on local microclimate is required to understand how large-scale wind deployment affects large-scale agriculture. This study examines the potential effect of wind turbine wakes on a corn crop in central Iowa during summer 2010. The field site consisted of one surface flux tower upwind of a row of five modern wind turbine generators, an identical surface flux station downwind of the turbine row, and a ground based LIDAR system downwind of the wind turbines. Each flux tower was instrumented with an array consisting of radiometers, a three-dimensional sonic anemometer, an open cell CO2 analyzer, a cup anemometer and wind vane, temperature and relative humidity sensors, and a tipping bucket. The LIDAR system reliably obtained readings up to 200 m above ground level (AGL), spanning the entire rotor disk (~40 m to 120 m AGL). This presentation examines wake-surface interaction on one particular night, during which the prevailing winds situated the LIDAR directly behind a wind turbine approximately 2 rotor diameters downwind of the turbine tower. As expected preliminary LIDAR results indicate that in the turbine rotor shadow there is a strong deficit of horizontal momentum. Additionally, a strong nocturnal low-level jet occurred above the turbine rotor disk. Wavelet spectral analysis indicates that oscillatory behavior, with frequencies characteristic of wind turbine wakes, is observed in the LIDAR horizontal and vertical winds and in the downwind flux station datastreams. The characterization of wake effects provided by this unique dataset will allow for better parameterization and modeling of wind turbine wake

  3. Importance of thermal effects and sea surface roughness for offshore wind resource assessment

    DEFF Research Database (Denmark)

    Lange, B.; Larsen, Søren Ejling; Højstrup, Jørgen;

    2004-01-01

    in the Danish Baltic Sea. Monin-Obukhov theory is often used for the description of the wind speed profile. From a given wind speed at one height, the profile is predicted using two parameters, Obukhov length and sea surface roughness. Different methods to estimate these parameters are discussed and compared......-Obukhov theory, a simple correction method to account for this effect has been developed and is tested in the same way. The models for the estimation of the sea surface roughness were found to lead only to small differences. For the purpose of wind resource assessment, even the assumption of a constant roughness......). The power output estimation has also been compared with the method of the resource estimation program WAsP. For the Rodsand data set the prediction error of WAsP is about 4%. For the extrapolation with Monin-Obukhov theory with different L and z(0) estimations, it is 5-9%. The simple wind profile correction...

  4. Sea surface wind perturbations over the Kashevarov Bank of the Okhotsk Sea: a satellite study

    Directory of Open Access Journals (Sweden)

    T. I. Tarkhova

    2011-02-01

    Full Text Available Sea surface wind perturbations over sea surface temperature (SST cold anomalies over the Kashevarov Bank (KB of the Okhotsk Sea are analyzed using satellite (AMSR-E and QuikSCAT data during the summer-autumn period of 2006–2009. It is shown, that frequency of cases of wind speed decreasing over a cold spot in August–September reaches up to 67%. In the cold spot center SST cold anomalies reached 10.5 °C and wind speed lowered down to ~7 m s−1 relative its value on the periphery. The wind difference between a periphery and a centre of the cold spot is proportional to SST difference with the correlations 0.5 for daily satellite passes data, 0.66 for 3-day mean data and 0.9 for monthly ones. For all types of data the coefficient of proportionality consists of ~0.3 m s−1 on 1 °C.

  5. Energy transfer of surface wind-induced currents to the deep ocean via resonance with the Coriolis force

    Science.gov (United States)

    Ashkenazy, Yosef

    2017-03-01

    There are two main comparable sources of energy to the deep ocean-winds and tides. However, the identity of the most efficient mechanism that transfers wind energy to the deep ocean is still debated. Here we study, using oceanic general circulation model simulations and analytic derivations, the way that the wind directly supplies energy down to the bottom of the ocean when it is stochastic and temporally correlated or when it is periodic with a frequency that matches the Coriolis frequency. Basically, under these, commonly observed, conditions, one of the wind components resonates with the Coriolis frequency. Using reanalysis surface wind data and our simple model, we show that about one-third of the kinetic energy that is associated with wind-induced currents resides in the abyssal ocean, highlighting the importance of the resonance of the wind with the Coriolis force.

  6. L band radar backscatter dependence upon surface wind stress - A summary of new Seasat-1 and aircraft observations

    Science.gov (United States)

    Thompson, T. W.; Weissman, D. E.; Gonzalez, F. I.

    1983-01-01

    The wind-scale relationships for L band radar wavelengths near 25 cm and 20 deg angle of incidence and HH polarization are reviewed using a number of aircraft and Seasat-1 SAR observations. The dependence of the L band backscatter coefficient from the ocean upon surface wind speed and direction is stated. The wind speed coefficient is 0.5 + or - 0.1 for a wide range of wind speeds. The wind direction coefficient is near zero for lower winds and stable marine boundary layers, but may be 0.20 + or - 0.05 for moderate wind speeds and an unstable marine boundary layer. These results are interpreted in terms of existing theoretical models for radar scattering from the ocean.

  7. Discussion on wind factor influencing the distribution of biological soil crusts on surface of sand dunes

    Institute of Scientific and Technical Information of China (English)

    YongSheng Wu; Hasi Erdun; RuiPing Yin; Xin Zhang; Jie Ren; Jian Wang; XiuMin Tian; ZeKun Li; HengLu Miao

    2013-01-01

    Biological soil crusts are widely distributed in arid and semi-arid regions, whose formation and development have an important impact on the restoration process of the desert ecosystem. In order to explore the relationship between surface airflow and development characteristics of biological soil crusts, we studied surface airflow pattern and development characteristics of biological soil crusts on the fixed dune profile through field observation. Results indicate that the speed of near-surface airflow is the lowest at the foot of windward slope and the highest at the crest, showing an increasing trend from the foot to the crest. At the leeward side, although near-surface airflow increases slightly at the lower part of the slope after an initial sudden decrease at upper part of the slope, its overall trend decreases from the crest. Wind velocity variation coefficient varied at different heights over each observation site. The thickness, shear strength of biological soil crusts and percentage of fine particles at crusts layer decreased from the slope foot to the upper part, showing that biological soil crusts are less developed in high wind speed areas and well developed in low wind speed areas. It can be seen that there is a close relationship between the distribution of biological soil crusts in different parts of the dunes and changes in airflow due to geomorphologic variation.

  8. Impact of surface wind biases on the Antarctic sea ice concentration budget in climate models

    Science.gov (United States)

    Lecomte, O.; Goosse, H.; Fichefet, T.; Holland, P. R.; Uotila, P.; Zunz, V.; Kimura, N.

    2016-09-01

    We derive the terms in the Antarctic sea ice concentration budget from the output of three models, and compare them to observations of the same terms. Those models include two climate models from the 5th Coupled Model Intercomparison Project (CMIP5) and one ocean-sea ice coupled model with prescribed atmospheric forcing. Sea ice drift and wind fields from those models, in average over April-October 1992-2005, all exhibit large differences with the available observational or reanalysis datasets. However, the discrepancies between the two distinct ice drift products or the two wind reanalyses used here are sometimes even greater than those differences. Two major findings stand out from the analysis. Firstly, large biases in sea ice drift speed and direction in exterior sectors of the sea ice covered region tend to be systematic and consistent with those in winds. This suggests that sea ice errors in these areas are most likely wind-driven, so as errors in the simulated ice motion vectors. The systematic nature of these biases is less prominent in interior sectors, nearer the coast, where sea ice is mechanically constrained and its motion in response to the wind forcing more depending on the model rheology. Second, the intimate relationship between winds, sea ice drift and the sea ice concentration budget gives insight on ways to categorize models with regard to errors in their ice dynamics. In exterior regions, models with seemingly too weak winds and slow ice drift consistently yield a lack of ice velocity divergence and hence a wrong wintertime sea ice growth rate. In interior sectors, too slow ice drift, presumably originating from issues in the physical representation of sea ice dynamics as much as from errors in surface winds, leads to wrong timing of the late winter ice retreat. Those results illustrate that the applied methodology provides a valuable tool for prioritizing model improvements based on the ice concentration budget-ice drift biases-wind biases

  9. NUMERICAL STUDY OF WAVE EFFECTS ON SURFACE WIND STRESS AND SURFACE MIXING LENGTH BY THREE-DIMENSIONAL CIRCULATION MODELING

    Institute of Scientific and Technical Information of China (English)

    LIANG Bing-chen; LI Hua-jun; LEE Dong-yong

    2006-01-01

    The effects of waves on Surface Drag Coefficient (SDC) and surface mixing length were analyzed and discussed by carrying out three-dimensional current modeling for the Bohai Sea in the present work. A three- dimensional coupled hydrodynamical-ecological model for regional and shelf seas (COHERENS) incorporating the influences of wave-current interactions was coupled with the third-generation wave model swan taking into account time-varying currents. The effects of waves on currents were included in the SDC, surface mixing length and bottom drag coefficient. Firstly, the formulations in Donelan were incorporated into the COHERENS to account for wave-dependent SDC. In order to compare simulation results for the wave-dependent SDC, the simulation for wind-dependent SDC was also carried out. Second, Wave-Induced Surface Mixing Length (described as WISML sometimes in this paper) was incorporated into the COHERENS. Four numerical experiments were conducted to discuss the effects of two kinds of wave processes. Generally, the values of time series of current velocity and water surface elevation given by the simulation with all of the three wave processes have a good agreement with observed data. The existence of WISML changes obviously current vertical profiles and the existence of the wave dependent SDC modifies the current field of both top and bottom layers with the wind-dependent SDC.

  10. Surface chlorophyll, westerly winds, and El Nino in the western Pacific warm pool

    Science.gov (United States)

    Radenac, Marie-Hélène; Messié, Monique; Bosc, Christelle

    The western equatorial Pacific warm pool is characterized by sea surface temperature (SST) higher than 29° C and sea surface salinity (SSS) lower than 35. It is usually considered as a broad oligotrophic region with a nitrate exhausted and low chlorophyll (lower than 0.1 mg m-3 ) surface layer. Nevertheless, ocean colour imagery shows that surface chlorophyll concentrations vary at the interannual, seasonal, and intraseasonal time-scales. In this study, we use the 2000-2007 SeaWiFS data together with QuikScat wind, TMI SST, altimetric sea level, and OSCAR satellite-derived surface currents to describe and understand the variability of the surface chlorophyll in the region. In particular, nutrient and phytoplankton-rich waters upwelled near the country-regionplaceNew Guinea coast influence the distribution of surface chlorophyll in the equatorial warm pool from intra-seasonal to interannual time-scales. We show that the eastern part of the region is occupied by a quasi-persistent strip of very oligotrophic waters with chlorophyll concentrations close to those observed in the subtropical gyres (0.07 mg m-3 ). It extends over about 20 degrees of longitude and its width varies seasonally and with the El Niño/La Niña phases. Overall, this very oligotrophic zone matches n n the well-documented region with the warmest SST (over 30° C), thickest barrier layer (more than 20 m), and highest sea level (more than 220 cm) of the equatorial Pacific. Its eastern limit matches the eastern edge of the warm pool and moves zonally at seasonal and interannual time-scales. While the eastern edge has been described in previous studies, the western edge is poorly known. It is marked by the 0.1 mg m-3 chlorophyll isoline and its zonal motions occur at seasonal, interannual, and intraseasonal time-scales, as well. We investigate the late-2001 to late-2002 time period to assess the intra-seasonal variability of the surface chlorophyll in relation with the wind intra-seasonal variability

  11. High resolution modelling and observation of wind-driven surface currents in a semi-enclosed estuary

    Science.gov (United States)

    Nash, S.; Hartnett, M.; McKinstry, A.; Ragnoli, E.; Nagle, D.

    2012-04-01

    Hydrodynamic circulation in estuaries is primarily driven by tides, river inflows and surface winds. While tidal and river data can be quite easily obtained for input to hydrodynamic models, sourcing accurate surface wind data is problematic. Firstly, the wind data used in hydrodynamic models is usually measured on land and can be quite different in magnitude and direction from offshore winds. Secondly, surface winds are spatially-varying but due to a lack of data it is common practice to specify a non-varying wind speed and direction across the full extents of a model domain. These problems can lead to inaccuracies in the surface currents computed by three-dimensional hydrodynamic models. In the present research, a wind forecast model is coupled with a three-dimensional numerical model of Galway Bay, a semi-enclosed estuary on the west coast of Ireland, to investigate the effect of surface wind data resolution on model accuracy. High resolution and low resolution wind fields are specified to the model and the computed surface currents are compared with high resolution surface current measurements obtained from two high frequency SeaSonde-type Coastal Ocean Dynamics Applications Radars (CODAR). The wind forecast models used for the research are Harmonie cy361.3, running on 2.5 and 0.5km spatial grids for the low resolution and high resolution models respectively. The low-resolution model runs over an Irish domain on 540x500 grid points with 60 vertical levels and a 60s timestep and is driven by ECMWF boundary conditions. The nested high-resolution model uses 300x300 grid points on 60 vertical levels and a 12s timestep. EFDC (Environmental Fluid Dynamics Code) is used for the hydrodynamic model. The Galway Bay model has ten vertical layers and is resolved spatially and temporally at 150m and 4 sec respectively. The hydrodynamic model is run for selected hindcast dates when wind fields were highly energetic. Spatially- and temporally-varying wind data is provided by

  12. A 15-year climatology of wind pattern impacts on surface ozone in Houston, Texas

    Science.gov (United States)

    Souri, Amir Hossein; Choi, Yunsoo; Li, Xiangshang; Kotsakis, Alexander; Jiang, Xun

    2016-06-01

    Houston is recognized for its large petrochemical industrial facilities providing abundant radicals for tropospheric ozone formation. Fortunately, maximum daily 8-h average (MDA8) surface ozone concentrations have declined in Houston (- 0.6 ± 0.3 ppbv yr- 1) during the summers (i.e., May to September) of 2000 to 2014, possibly due to the reductions in precursor emissions by effective control policies. However, it is also possible that changes in meteorological variables have affected ozone concentrations. This study focused on the impact of long-term wind patterns which have the highest impact on ozone in Houston. The analysis of long-term wind patterns can benefit surface ozone studies by 1) providing wind patterns that distinctly changed ozone levels, 2) investigating the frequency of patterns and the respective changes and 3) estimating ozone trends in specific wind patterns that local emissions are mostly involved, thus separating emissions impacts from meteorology to some extent. To this end, the 900-hPa flow patterns in summers of 2000 to 2014 were clustered in seven classes (C1-C7) by deploying an unsupervised partitioning method. We confirm the characteristics of the clusters from a backward trajectory analysis, monitoring networks, and a regional chemical transport model simulation. The results indicate that Houston has experienced a statistically significant downward trend (- 0.6 ± 0.4 day yr- 1) of the cluster of weak easterly and northeasterly days (C4), when the highest fraction of ozone exceedances (MDA8 > 70 ppbv) occurred. This suggests that the reduction in ozone precursors was not the sole reason for the decrease in ozone exceedance days (- 1.5 ± 0.6 day yr- 1). Further, to examine the efficiency of control policies intended to reduce the amount of ozone, we estimated the trend of MDA8 ozone in C4 and C5 (weak winds) days when local emissions are primarily responsible for high ambient ozone levels. Both C4 and C5 show a large reduction in the

  13. Observation and simulation of near-surface wind and its variation with topography in Urumqi, West China

    Science.gov (United States)

    Jin, Lili; Li, Zhenjie; He, Qing; Miao, Qilong; Zhang, Huqiang; Yang, Xinghua

    2016-12-01

    Near-surface wind measurements obtained with five 100-m meteorology towers, 39 regional automatic stations, and simulations by the Weather Research and Forecasting (WRF) model were used to investigate the spatial structure of topography-driven flows in the complex urban terrain of Urumqi, China. The results showed that the wind directions were mainly northerly and southerly within the reach of 100 m above ground in the southern suburbs, urban area, and northern suburbs, which were consistent with the form of the Urumqi gorge. Strong winds were observed in southern suburbs, whereas the winds in the urban, northern suburbs, and northern rural areas were weak. Static wind occurred more frequently in the urban and northern rural areas than in the southern suburbs. In the southern suburbs, wind speed was relatively high throughout the year and did not show significant seasonal variations. The average annual wind speed in this region varied among 1.9-5.5, 1.1-3.6, 1.2-4.3, 1.2-4.3, and 1.1-3.5 m s -1 within the reach of 100 m above ground at Yannanlijiao, Shuitashan, Liyushan, Hongguangshan, and Midong, respectively. The flow characteristics comprised more airflows around the mountain, where the convergence and divergence were dominated by the terrain in eastern and southwestern Urumqi. Further analysis showed that there was a significant mountain-valley wind in spring, summer, and autumn, which occurred more frequently in spring and summer for 10-11 h in urban and northern suburbs. During daytime, there was a northerly valley wind, whereas at night there was a southerly mountain wind. The conversion time from the mountain wind to the valley wind was during 0800-1000 LST (Local Standard Time), while the conversion from the valley wind to the mountain wind was during 1900-2100 LST. The influence of the mountain-valley wind in Urumqi City was most obvious at 850 hPa, according to the WRF model.

  14. Strong winter monsoon wind causes surface cooling over India and China in the Late Miocene

    Directory of Open Access Journals (Sweden)

    H. Tang

    2015-01-01

    Full Text Available Modern Asian winter monsoon characterised by the strong northwesterly wind in East Asia and northeasterly wind in South Asia, has a great impact on the surface temperature of the Asian continent. Its outbreak can result in significant cooling of the monsoon region. However, it is still unclear whether such an impact existed and is detectable in the deep past. In this study, we use temperature reconstructions from plant and mammal fossil data together with climate model results to examine the co-evolution of surface temperature and winter monsoon in the Late Miocene (11–5 Ma, when a significant change of the Asian monsoon system occurred. We find that a stronger-than-present winter monsoon wind might have existed in the Late Miocene due to the lower Asian orography, particularly the northern Tibetan Plateau and the mountains north of it. This can lead to a pronounced cooling in southern China and northern India, which counteracts the generally warmer conditions in the Late Miocene compared to present. The Late Miocene strong winter monsoon was characterised by a marked westerly component and primarily caused by a pressure anomaly between the Tibetan Plateau and Northern Eurasia, rather than by the gradient between the Siberian High and the Aleutian Low. As a result, the close association of surface temperature with winter monsoon strength on inter-annual scale as observed at present may not have established in the Late Miocene.

  15. Errors of five-day mean surface wind and temperature conditions due to inadequate sampling

    Science.gov (United States)

    Legler, David M.

    1991-01-01

    Surface meteorological reports of wind components, wind speed, air temperature, and sea-surface temperature from buoys located in equatorial and midlatitude regions are used in a simulation of random sampling to determine errors of the calculated means due to inadequate sampling. Subsampling the data with several different sample sizes leads to estimates of the accuracy of the subsampled means. The number N of random observations needed to compute mean winds with chosen accuracies of 0.5 (N sub 0.5) and 1.0 (N sub 1,0) m/s and mean air and sea surface temperatures with chosen accuracies of 0.1 (N sub 0.1) and 0.2 (N sub 0.2) C were calculated for each 5-day and 30-day period in the buoy datasets. Mean values of N for the various accuracies and datasets are given. A second-order polynomial relation is established between N and the variability of the data record. This relationship demonstrates that for the same accuracy, N increases as the variability of the data record increases. The relationship is also independent of the data source. Volunteer-observing ship data do not satisfy the recommended minimum number of observations for obtaining 0.5 m/s and 0.2 C accuracy for most locations. The effect of having remotely sensed data is discussed.

  16. Effects of surface current-wind interaction in an eddy-rich general ocean circulation simulation of the Baltic Sea

    Science.gov (United States)

    Dietze, Heiner; Löptien, Ulrike

    2016-08-01

    Deoxygenation in the Baltic Sea endangers fish yields and favours noxious algal blooms. Yet, vertical transport processes ventilating the oxygen-deprived waters at depth and replenishing nutrient-deprived surface waters (thereby fuelling export of organic matter to depth) are not comprehensively understood. Here, we investigate the effects of the interaction between surface currents and winds on upwelling in an eddy-rich general ocean circulation model of the Baltic Sea. Contrary to expectations we find that accounting for current-wind effects inhibits the overall vertical exchange between oxygenated surface waters and oxygen-deprived water at depth. At major upwelling sites, however (e.g. off the southern coast of Sweden and Finland) the reverse holds: the interaction between topographically steered surface currents with winds blowing over the sea results in a climatological sea surface temperature cooling of 0.5 K. This implies that current-wind effects drive substantial local upwelling of cold and nutrient-replete waters.

  17. Solar Wind Access to Lunar Polar Craters: Feedback Between Surface Charging and Plasma Expansion

    Science.gov (United States)

    Zimmerman, M. I.; Farrell, W. M.; Stubbs, T. J.; Halekas, J. S.; Jackson, T. L.

    2011-01-01

    Determining the plasma environment within permanently shadowed lunar craters is critical to understanding local processes such as surface charging, electrostatic dust transport, volatile sequestration, and space weathering. In order to investigate the nature of this plasma environment, the first two-dimensional kinetic simulations of solar wind expansion into a lunar crater with a self-consistent plasma-surface interaction have been undertaken. The present results reveal how the plasma expansion into a crater couples with the electrically-charged lunar surface to produce a quasi-steady wake structure. In particular, there is a negative feedback between surface charging and ambipolar wake potential that allows an equilibrium to be achieved, with secondary electron emission strongly moderating the process. A range of secondary electron yields is explored, and two distinct limits are highlighted in which either surface charging or ambipoiar expansion is responsible for determining the overall wake structure.

  18. Superhydrophobic wind turbine blade surfaces obtained by a simple deposition of silica nanoparticles embedded in epoxy

    Science.gov (United States)

    Karmouch, Rachid; Ross, Guy G.

    2010-11-01

    Samples of wind turbine blade surface have been covered with a superhydrophobic coating made of silica nanoparticles embedded in commercial epoxy paint. The superhydrophobic surfaces have a water contact angle around 152°, a hysteresis less than 2° and a water drop sliding angle around 0.5°. These surfaces are water repellent so that water drops cannot remain motionless on the surface. Examination of coated and uncoated surfaces with scanning electron microscopy and atomic force microscopy, together with measurements of water contact angles, indicates that the air trapped in the cavity enhances the water repellency similarly to the lotus leaf effect. Moreover, this new coating is stable under UVC irradiation and water pouring. The production of this nanoscale coating film being simple and low cost, it can be considered as a suitable candidate for water protection of different outdoor structures.

  19. Superhydrophobic wind turbine blade surfaces obtained by a simple deposition of silica nanoparticles embedded in epoxy

    Energy Technology Data Exchange (ETDEWEB)

    Karmouch, Rachid, E-mail: karmouch@emt.inrs.ca [INRS-Centre Energie Materiaux Telecommunications, 1650 Boulevard Lionel-Boulet, Varennes, Quebec J3X 1S2 (Canada); Ross, Guy G. [INRS-Centre Energie Materiaux Telecommunications, 1650 Boulevard Lionel-Boulet, Varennes, Quebec J3X 1S2 (Canada)

    2010-11-15

    Samples of wind turbine blade surface have been covered with a superhydrophobic coating made of silica nanoparticles embedded in commercial epoxy paint. The superhydrophobic surfaces have a water contact angle around 152{sup o}, a hysteresis less than 2{sup o} and a water drop sliding angle around 0.5{sup o}. These surfaces are water repellent so that water drops cannot remain motionless on the surface. Examination of coated and uncoated surfaces with scanning electron microscopy and atomic force microscopy, together with measurements of water contact angles, indicates that the air trapped in the cavity enhances the water repellency similarly to the lotus leaf effect. Moreover, this new coating is stable under UVC irradiation and water pouring. The production of this nanoscale coating film being simple and low cost, it can be considered as a suitable candidate for water protection of different outdoor structures.

  20. A Ka-Band Backscatter Model Function and an Algorithm for Measurement of the Wind Vector Over the Sea Surface

    NARCIS (Netherlands)

    Nekrasov, A.; Hoogeboom, P.

    2005-01-01

    A Ka-band backscatter model and an algorithm for measurement of the wind speed and direction over the sea surface by a frequency-modulated continous-wave radar demonstrator system operated in scatterometer mode have been developed. To evaluate the proposed algorithm, a simulation of the wind vector

  1. Surface mixed layer deepening through wind shear alignment in a seasonally stratified shallow sea

    Science.gov (United States)

    Lincoln, B. J.; Rippeth, T. P.; Simpson, J. H.

    2016-08-01

    Inertial oscillations are a ubiquitous feature of the surface ocean. Here we combine new observations with a numerical model to investigate the role of inertial oscillations in driving deepening of the surface mixed layer in a seasonally stratified sea. Observations of temperature and current structure, from a mooring in the Western Irish Sea, reveal episodes of strong currents (>0.3 m s-1) lasting several days, resulting in enhanced shear across the thermocline. While the episodes of strong currents are coincident with windy periods, the variance in the shear is not directly related to the wind stress. The shear varies on a subinertial time scale with the formation of shear maxima lasting several hours occurring at the local inertial period of 14.85 h. These shear maxima coincide with the orientation of the surface current being at an angle of approximately 90° to the right of the wind direction. Observations of the water column structure during windy periods reveal deepening of the surface mixed layer in a series of steps which coincide with a period of enhanced shear. During the periods of enhanced shear gradient, Richardson number estimates indicate Ri-1 ≥ 4 at the base of the surface mixed layer, implying the deepening as a result of shear instability. A one-dimensional vertical exchange model successfully reproduces the magnitude and phase of the shear spikes as well as the step-like deepening. The observations and model results therefore identify the role of wind shear alignment as a key entrainment mechanism driving surface mixed layer deepening in a shallow, seasonally stratified sea.

  2. A wind tunnel study of flows over idealised urban surfaces with roughness sublayer corrections

    Science.gov (United States)

    Ho, Yat-Kiu; Liu, Chun-Ho

    2016-08-01

    Dynamics in the roughness (RSLs) and inertial (ISLs) sublayers in the turbulent boundary layers (TBLs) over idealised urban surfaces are investigated analytically and experimentally. In this paper, we derive an analytical solution to the mean velocity profile, which is a continuous function applicable to both RSL and ISL, over rough surfaces in isothermal conditions. Afterwards, a modified mixing-length model for RSL/ISL transport is developed that elucidates how surface roughness affects the turbulence motions. A series of wind tunnel experiments are conducted to measure the vertical profiles of mean and fluctuating velocities, together with momentum flux over various configurations of surface-mounted ribs in cross flows using hot-wire anemometry (HWA). The analytical solution agrees well with the wind tunnel result that improves the estimate to mean velocity profile over urban surfaces and TBL dynamics as well. The thicknesses of RSL and ISL are calculated by monitoring the convergence/divergence between the temporally averaged and spatio-temporally averaged profiles of momentum flux. It is found that the height of RSL/ISL interface is a function of surface roughness. Examining the direct, physical influence of roughness elements on near-surface RSL flows reveals that the TBL flows over rough surfaces exhibit turbulence motions of two different length scales which are functions of the RSL and ISL structure. Conclusively, given a TBL, the rougher the surface, the higher is the RSL intruding upward that would thinner the ISL up to 50 %. Therefore, the conventional ISL log-law approximation to TBL flows over urban surfaces should be applied with caution.

  3. Connecting the surface of the Sun to the Heliosphere : wind speed and magnetic field geometry

    Science.gov (United States)

    Pinto, Rui

    2016-07-01

    The large-scale solar wind speed distribution varies in time in response to the cyclic variations of the strength and geometry of the magnetic field of the corona. Based on this idea, semi-empirical predictive laws for the solar wind speed (such as in the widely-used WSA law) use simple parameters describing the geometry of the coronal magnetic field. In practice, such scaling laws require ad-hoc corrections and empirical fits to in-situ spacecraft data, and a predictive law based solely on physical principles is still missing. I will discuss improvements to this kind of laws based on the analysis of very large samples of wind acceleration profiles in open flux-tubes (both from MHD simulations and potential-field extrapolations), and possible strategies for corona and heliosphere model coupling. I will, furthermore present an ongoing modelling effort to determine the magnetic connectivity, paths and propagation delays of any type of disturbance (slow/fast solar wind, waves, energetic particles, ballistic propagation) between the solar surface and any point in the interplanetary space at any time. This is a key point for the exploitation of data from Solar Orbiter and Solar Probe Plus, and more generally for establishing connections between remote and in-situ spacecraft data. This is work is supported by the FP7 project #606692 (HELCATS).

  4. Near surface spatially averaged air temperature and wind speed determined by acoustic travel time tomography

    Directory of Open Access Journals (Sweden)

    Armin Raabe

    2001-03-01

    Full Text Available Acoustic travel time tomography is presented as a possibility for remote monitoring of near surface airtemperature and wind fields. This technique provides line-averaged effective sound speeds changing with temporally and spatially variable air temperature and wind vector. The effective sound speed is derived from the travel times of sound signals which propagate at defined paths between different acoustic sources and receivers. Starting with the travel time data a tomographic algorithm (Simultaneous Iterative Reconstruction Technique, SIRT is used to calculate area-averaged air temperature and wind speed. The accuracy of the experimental method and the tomographic inversion algorithm is exemplarily demonstrated for one day without remarkable differences in the horizontal temperature field, determined by independent in situ measurements at different points within the measuring field. The differences between the conventionally determined air temperature (point measurement and the air temperature determined by tomography (area-averaged measurement representative for the area of the measuring field 200m x 260m were below 0.5 K for an average of 10 minutes. The differences obtained between the wind speed measured at a meteorological mast and calculated from acoustic measurements are not higher than 0.5 ms-1 for the same averaging time. The tomographically determined area-averaged distribution of air temperature (resolution 50 m x 50 m can be used to estimate the horizontal gradient of air temperature as a pre-condition to detect horizontal turbulent fluxes of sensible heat.

  5. Statistical parameters of the spatiotemporal variability of the wind direction in the surface layer

    Science.gov (United States)

    Shishov, E. A.; Koprov, B. M.; Koprov, V. M.

    2017-01-01

    Multipoint measurements of wind direction were carried out during the expedition of the Institute of Atmospheric Physics, Russian Academy of Sciences (IPA RAS), in Tsimlyansk in 2012. Spatial correlation functions for the transverse direction and temporal correlation functions for the longitudinal direction are plotted under stable and unstable stratification of the atmosphere. The longitudinal correlation radius is much higher than the transverse one, and radii in daytime realizations are larger than in nighttime. To determine the stratification conditions, an ultrasonic anemometer-thermometer was used. Autospectra of wind direction fluctuations were plotted. They include long segments of power dependence on the frequency. The spectral correlation coefficients of variations in the wind direction versus intersensor distance in the transverse direction are also calculated. A set of fast-response thermometers was used in the experiment. They allowed temperature mapping, i.e., plotting the time variations in the isothermal surface altitude. That analysis was also applied to visualization of the spatiotemporal variability of wind direction. The resulting data were used for planning the helicity measurements in the Tsimlyansk expedition in 2014.

  6. Variability in the coupling between sea surface temperature and wind stress in the global coastal ocean

    Science.gov (United States)

    Wang, Yuntao; Castelao, Renato M.

    2016-08-01

    Mesoscale ocean-atmosphere interaction between sea surface temperature (SST) and wind stress throughout the global coastal ocean was investigated using 7 years of satellite observations. Coupling coefficients between crosswind SST gradients and wind stress curl and between downwind SST gradients and wind stress divergence were used to quantify spatial and temporal variability in the strength of the interaction. The use of a consistent data set and standardized methods allow for direct comparisons between coupling coefficients in the different coastal regions. The analysis reveals that strong coupling is observed in many mid-latitude regions throughout the world, especially in regions with strong fronts like Eastern and Western Boundary Currents. Most upwelling regions in Eastern Boundary Currents are characterized by strong seasonal variability in the strength of the coupling, which generally peaks during summer in mid latitudes and during winter at low latitudes. Seasonal variability in coastal regions along Western Boundary Currents is comparatively smaller. Intraseasonal variability is especially important in regions of strong eddy activity (e.g., Western Boundary Currents), being particularly relevant for the coupling between crosswind SST gradients and wind stress curl. Results from the analysis can be used to guide modeling studies, since it allows for the a priori identification of regions in which regional models need to properly represent the ocean-atmosphere interaction to accurately represent local variability.

  7. On alpha stable distribution of wind driven water surface wave slope

    CERN Document Server

    Joelson, Maminirina

    2008-01-01

    We propose a new formulation of the probability distribution function of wind driven water surface slope with an $\\alpha$-stable distribution probability. The mathematical formulation of the probability distribution function is given under an integral formulation. Application to represent the probability of time slope data from laboratory experiments is carried out with satisfactory results. We compare also the $\\alpha$-stable model of the water surface slopes with the Gram-Charlier development and the non-Gaussian model of Liu et al\\cite{Liu}. Discussions and conclusions are conducted on the basis of the data fit results and the model analysis comparison.

  8. Wind tunnel experiment of drag of isolated tree models in surface boundary layer

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    For very sparse tree land individual tree was the basic element of interaction between atmosphere and the surface. Drag of isolated tree was preliminary aerodynamic index for analyzing the atmospheric boundary layer of this kind of surface. A simple pendulum method was designed and carried out in wind tunnel to measure drag of isolated tree models according to balance law of moment of force. The method was easy to conduct and with small error. The results showed that the drag and drag coefficient of isolated tree increased with decreasing of its permeability or porosity. Relationship between drag coefficient and permeability of isolated tree empirically was expressed by quadric curve.

  9. Specific features of heat transfer on the external surface of smoke stacks blown by wind

    Science.gov (United States)

    Maneev, A. P.; Terekhov, V. I.

    2015-03-01

    Results of a full-scale experiment on studying heat transfer on the surface of a reinforced-concrete smoke stack blown by wind at the value of Reynolds number Re = 1.05 × 107 are presented. Comparison of the experimental results with the experimental data obtained previously by other researchers under laboratory conditions at Re cylinder in a transcritical streamlining mode. The data obtained in the present study open the possibility to estimate the average values of heat transfer coefficient on the surface of smoke stacks in a flow of atmospheric air at 4 × 106 < Re < 107.

  10. The climate influence of anthropogenic land-use changes on near-surface wind energy potential in China

    Institute of Scientific and Technical Information of China (English)

    LI Yan; WANG Yuan; CHU HuiYun; TANG JianPing

    2008-01-01

    There is considerable interest in the potential impact of climate change on wind energy in China. The climate change of near-surface wind energy potential in China under the background of global warming and its association with anthropogenic land-use changes are investigated by calculating the difference in surface wind speeds between the NCEP/NCAR reanalysis data and the observations since the re-analysis dataset contains the influence of large-scale climate changes due to greenhouse gases, it is less sensitive to regional surface processes associated with land types. The surface wind data in this study consist of long-tarm observations from 604 Chinese Roution Meteorological Stations and theNCEP/NCAR reanalysis data from 1960-1999. The results suggest that the observed mean wind speeds significantly weakened and the near-surface wind power trended downward due to urbanization and other land-use changes in the last 40 years. The mean wind energy weakened by -3.84 W·m-2 per decade due to the influence of anthropogenic land-use change, which is close to the observed climate change (-4.51 W·m-2/10 a).

  11. nowCOAST's Map Service for NOAA NWS NDFD Gridded Forecasts of Surface Wind Velocity Barb (knots) (Time Offsets)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Map Information: This nowCOAST time-offsets map service provides maps depicting the NWS surface wind velocity forecasts from the National Digital Forecast Database...

  12. nowCOAST's Map Service for NOAA NWS NDFD Gridded Forecasts of Surface Wind Speed (knots) (Time Offsets)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Map Information: This nowCOAST time-offsets map service provides maps depicting the NWS surface wind speed forecasts from the National Digital Forecast Database...

  13. Comments on Navy/NRL requirements for sea surface temperature and surface wind measurements on Seasat-A

    Science.gov (United States)

    Ruskin, R. E.; Jeck, R. K., Jr.

    1974-01-01

    SEASAT instrumentation payload requirements to provide satellite data for the Navy fleet operational fog prediction program include: (1) some form of C-band microwave radiometer capability; (2) a scanning antenna with a 40-km Instanteneous Field of View (IFOV) for the C-band channel; (3) a narrow band and high resolution IR scanning radiometer for cloud free areas; and (4) a capability for measuring surface winds of 3 to 50 m/sec at + or - 10% accuracy and 50 to 100 km spatial resolution.

  14. NUMERICAL SIMULATION OF SEA SURFACE DIRECTIONAL WAVE SPECTRA UNDER TYPHOON WIND FORCING

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Numercial simulation of sea surface directional wave spectra under typhoon wind forcing in the South China Sea (SCS) was carreid out using the WAVEWATCH-III wave model. The simulation was run for 210 h until the Typhoon Damrey (2005) approached Vietnam. The simulated data were compared with buoy observations, which were obtained in the northwest sea area of Hainan Island. The results show that the significant wave height, wave direction, wave length and frequency spetra agree well with buoy observations. The spatial characteristics of the signifciant wave height, mean wave period, mean wave length, wave age and directional spectra depend on the relative position from the typhoon center. Also, the misalignment between local wind and wave directions were investigated.

  15. Role of Surface Energy Exchange for Simulating Wind Turbine Inflow: A Case Study in the Southern Great Plains, USA

    Directory of Open Access Journals (Sweden)

    Sonia Wharton

    2014-12-01

    Full Text Available The Weather Research and Forecasting (WRF model is used to investigate choice of land surface model (LSM on the near surface wind profile, including heights reached by multi-megawatt (MW wind turbines. Simulations of wind profiles and surface energy fluxes were made using five LSMs of varying degrees of sophistication in dealing with soil–plant–atmosphere feedbacks for the Department of Energy (DOE Southern Great Plains (SGP Atmospheric Radiation Measurement Program (ARM Central Facility in Oklahoma, USA. Surface flux and wind profile measurements were available for validation. WRF was run for three, two-week periods covering varying canopy and meteorological conditions. The LSMs predicted a wide range of energy flux and wind shear magnitudes even during the cool autumn period when we expected less variability. Simulations of energy fluxes varied in accuracy by model sophistication, whereby LSMs with very simple or no soil–plant–atmosphere feedbacks were the least accurate; however, the most complex models did not consistently produce more accurate results. Errors in wind shear were also sensitive to LSM choice and were partially related to energy flux accuracy. The variability of LSM performance was relatively high suggesting that LSM representation of energy fluxes in WRF remains a large source of model uncertainty for simulating wind turbine inflow conditions.

  16. High resolution observations of the near-surface wind field over an isolated mountain and in a steep river canyon

    Directory of Open Access Journals (Sweden)

    B. W. Butler

    2014-06-01

    Full Text Available A number of numerical wind flow models have been developed for simulating wind flow at relatively fine spatial resolutions (e.g., ∼100 m; however, there are very limited observational data available for evaluating these high resolution models. This study presents high-resolution surface wind datasets collected from an isolated mountain and a steep river canyon. The wind data are presented in terms of four flow regimes: upslope, afternoon, downslope, and a synoptically-driven regime. There were notable differences in the data collected from the two terrain types. For example, wind speeds collected on the isolated mountain increased with distance upslope during upslope flow, but generally decreased with distance upslope at the river canyon site during upslope flow. Wind speed did not have a simple, consistent trend with position on the slope during the downslope regime on the isolated mountain, but generally increased with distance upslope at the river canyon site. The highest measured speeds occurred during the passage of frontal systems on the isolated mountain. Mountaintop winds were often twice as high as wind speeds measured on the surrounding plain. The highest speeds measured in the river canyon occurred during late morning hours and were from easterly downcanyon flows, presumably associated with surface pressure gradients induced by formation of a regional thermal trough to the west and high pressure to the east. Under periods of weak synoptic forcing, surface winds tended to be decoupled from large-scale flows, and under periods of strong synoptic forcing, variability in surface winds was sufficiently large due to terrain-induced mechanical effects (speed-up over ridges and decreased speeds on leeward sides of terrain obstacles that a large-scale mean flow would not be representative of surface winds at most locations on or within the terrain feature. These findings suggest that traditional operational weather model (i.e., with

  17. The Role of Surface Energy Exchange for Simulating Wind Inflow: An Evaluation of Multiple Land Surface Models in WRF for the Southern Great Plains Site Field Campaign Report

    Energy Technology Data Exchange (ETDEWEB)

    Wharton, Sonia [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Simpson, Matthew [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Osuna, Jessica [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Newman, Jennifer [National Renewable Energy Lab. (NREL), Golden, CO (United States); Biraud, Sebastien [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-05-01

    The Weather Research and Forecasting (WRF) model is used to investigate choice of land surface model (LSM) on the near-surface wind profile, including heights reached by multi-megawatt wind turbines. Simulations of wind profiles and surface energy fluxes were made using five LSMs of varying degrees of sophistication in dealing with soil-plant-atmosphere feedbacks for the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility’s Southern Great Plains (SGP) Central Facility in Oklahoma. Surface-flux and wind-profile measurements were available for validation. The WRF model was run for three two-week periods during which varying canopy and meteorological conditions existed. The LSMs predicted a wide range of energy-flux and wind-shear magnitudes even during the cool autumn period when we expected less variability. Simulations of energy fluxes varied in accuracy by model sophistication, whereby LSMs with very simple or no soil-plant-atmosphere feedbacks were the least accurate; however, the most complex models did not consistently produce more accurate results. Errors in wind shear also were sensitive to LSM choice and were partially related to the accuracy of energy flux data. The variability of LSM performance was relatively high, suggesting that LSM representation of energy fluxes in the WRF model remains a significant source of uncertainty for simulating wind turbine inflow conditions.

  18. An Anisotropic Ocean Surface Emissivity Model Based on WindSat Polarimetric Brightness Observations

    Science.gov (United States)

    Smith, D. F.; Gasiewski, A. J.; Sandeep, S.; Weber, B. L.

    2012-12-01

    The goal of this research has been to develop a standardized fast full-Stokes ocean surface emissivity model with Jacobian for a wind-driven ocean surface applicable at arbitrary microwave frequencies, polarizations, and incidence angles. The model is based on the Ohio State University (OSU) two-scale code for surface emission developed by Johnson (2006, IEEE TGRS, 44, 560) but modified as follows: (1) the Meissner-Wentz dielectric permittivity (2012, IEEE TGRS, 50, 3004) replaces the original permittivity, (2) the Elfouhaily sea surface spectrum (1997, JGR, 102, C7,15781) replaces the Durden-Vesecky spectrum (1985, IEEE TGRS, OE-10, 445), but the Durden-Vesecky angular spreading function is retained, (3) the high-frequency portion of the Elfouhaily spectrum is multiplied by the Pierson-Moskowitz shape spectrum to correct an error in the original paper, (4) the generalized Phillips-Kitaigorodskii equilibrium range parameter for short waves is modeled as a continuous function of the friction velocity at the water surface to eliminate a discontinuous jump in the original paper. A total of five physical tuning parameters were identified, including the spectral strength and the hydrodynamic modulation factor. The short wave part of the spectrum is also allowed to have an arbitrary ratio relative to the long wave part. The foam fraction is multiplied by a variable correction factor, and also modulated to allow an anisotropic foam fraction with more foam on the leeward side of a wave. The model is being tuned against multi-year sequences of WindSat and Special Sensor Microwave/Imager (SSMI) data as analyzed by Meissner and Wentz (2012, IEEE TGRS, 50, 3004) for up to four Stokes brightnesses and in all angular harmonics up to two in twenty five wind bins from 0.5-25.5 m/s and of 1 m/s width. As a result there are 40 brightnesses per wind bin, for a total of 1000 brightnesses used to constrain the modified model. A chi-squared tuning criterion based on error standard

  19. The influence of wind speed on surface layer stability and turbulent fluxes over southern Indian peninsula station

    Indian Academy of Sciences (India)

    M N Patil; R T Waghmare; T Dharmaraj; G R Chinthalu; Devendraa Siingh; G S Meena

    2016-10-01

    Surface to atmosphere exchange has received much attention in numerical weather prediction models. This exchange is defined by turbulent parameters such as frictional velocity, drag coefficient and heat fluxes, which have to be derived experimentally from high-frequency observations. High-frequency measurementsof wind speed, air temperature and water vapour mixing ratio (eddy covariance measurements), were made during the Integrated Ground Observation Campaign (IGOC) of Cloud Aerosol Interaction and Precipitation Enhancement Experiment (CAIPEEX) at Mahabubnagar, India (16◦44'N, 77◦59'E) in the south-west monsoon season. Using these observations, an attempt was made to investigatethe behaviour of the turbulent parameters, mentioned above, with respect to wind speed. We found that the surface layer stability derived from the Monin–Obukhov length scale, is well depicted by the magnitude of wind speed, i.e., the atmospheric boundary layer was under unstable regime for wind speeds greater than 4 m s−1; under stable regime for wind speeds less than 2 m s−1 and under neutral regime for wind speeds in the range of 2–3 m s$^{−1}$. All the three stability regimes were mixed for wind speeds 3–4 m s$^{−1}$. The drag coefficient shows scatter variation with wind speed in stable as well as unstable conditions.

  20. Spatio-temporal variability in sea surface wind stress near and off the east coast of Korea

    Institute of Scientific and Technical Information of China (English)

    NAM SungHyun; KIM Young Ho; PARK Kyung-Ae; KIM Kuh

    2005-01-01

    Sea surface wind stress variabilities near and off the east coast of Korea, are examined using 7 kinds of wind datasets from measurements at 2 coastal (land) stations and 2 ocean buoys,satellite scatterometer (QuikSCAT), and global reanalyzed products (ECMWF,NOGAPS,and NCEP/NCAR). Temporal variabilities are analyzed at 3 frequency bands; synoptic (2~20 d), intra-seasonal (20~90 d),and seasonal (>90 d).Synoptic and intra-seasonal variations are predominant near and off the Donghae City due to the passage of the mesoscale weather system. Seasonal variation is caused by southeastward wind stress during Asian winter monsoon. The sea surface wind stress from reanalyzed datasets,QuikSCAT and KMA-B measurements off the coast show good agreement in the magnitude and direction,which are strongly aligned with the alongshore direction. At the land-based sites,wind stresses are much weaker by factors of 3~10 due to the mountainous landmass on the east parts of Korea Peninsula. The first EOF modes(67 % ~70%) of wind stresses from reanalyzed and QuikSCAT data have similar structures of the strong southeastward wind stress in winter along the coast but show different curl structures at scales less than 200 kn due to the orographic effects. The second EOF modes (23 % ~25%)show southwestward wind stress in every September along the east coast of the North Korea

  1. The influence of wind speed on surface layer stability and turbulent fluxes over southern Indian peninsula station

    Science.gov (United States)

    Patil, M. N.; Waghmare, R. T.; Dharmaraj, T.; Chinthalu, G. R.; Siingh, Devendraa; Meena, G. S.

    2016-09-01

    Surface to atmosphere exchange has received much attention in numerical weather prediction models. This exchange is defined by turbulent parameters such as frictional velocity, drag coefficient and heat fluxes, which have to be derived experimentally from high-frequency observations. High-frequency measurements of wind speed, air temperature and water vapour mixing ratio (eddy covariance measurements), were made during the Integrated Ground Observation Campaign (IGOC) of Cloud Aerosol Interaction and Precipitation Enhancement Experiment (CAIPEEX) at Mahabubnagar, India (16∘44'N, 77∘59'E) in the south-west monsoon season. Using these observations, an attempt was made to investigate the behaviour of the turbulent parameters, mentioned above, with respect to wind speed. We found that the surface layer stability derived from the Monin-Obukhov length scale, is well depicted by the magnitude of wind speed, i.e., the atmospheric boundary layer was under unstable regime for wind speeds >4 m s-1; under stable regime for wind speeds <2 m s-1 and under neutral regime for wind speeds in the range of 2-3 m s-1. All the three stability regimes were mixed for wind speeds 3-4 m s-1. The drag coefficient shows scatter variation with wind speed in stable as well as unstable conditions.

  2. Wind Structure and Wind Loading

    DEFF Research Database (Denmark)

    Brorsen, Michael

    The purpose of this note is to provide a short description of wind, i.e. of the flow in the atmosphere of the Earth and the loading caused by wind on structures. The description comprises: causes to the generation of windhe interaction between wind and the surface of the Earthhe stochastic nature...... of windhe interaction between wind and structures, where it is shown that wind loading depends strongly on this interaction...

  3. The Wind, Temperature, and Surface Pressure on Pluto from a Pluto General Circulation Model

    Science.gov (United States)

    Zalucha, A. M.; Gulbis, A.

    2011-12-01

    A variety of methods have been used to derive Pluto's atmospheric temperature, composition, and surface pressure from spectra and stellar occultation data, while wind is less easily determined. Gravity wave dissipation has been investigated [1] in the 18 March 2007 stellar occultation dataset [2], demonstrating that wind is occurring in the form of perturbations about a mean. Rossby waves have also been proposed [2] as an explanation to the 2007 dataset; however the method was used incorrectly. General circulation models (GCMs) are a ubiquitous tool in the field of planetary atmospheres to solve for the global state of the atmosphere in a physically consistent manner, but only recently have they began to be developed for Pluto. We use a Pluto version of the Massachusetts Institute of Technology (MIT) GCM to solve for the first time for wind, temperature, and surface pressure globally in Pluto's atmosphere. The Pluto version of the MIT GCM (PGCM) uses the MIT GCM dynamical core [3] with a radiative-conductive model [4]. It includes vertical thermal conduction and non-local thermodynamic equilibrium heating and cooling by methane at 3.3 um and 7.6 um, respectively. We perform a parameter sweep with methane volume mixing ratios of 0.2, 0.6, and 1% and initial global mean surface pressures of 6-26 ubar. We ran the model from rest starting in the model year 1973. We compared the PGCM results with occultation data from the years 1988, 2002, 2006, and 2007. Model light curves were calculated from the PGCM temperature output (averaged at 90 day intervals) at the corresponding date and Pluto latitudes of each occultation. The match between data and PGCM is better than between data and the radiative-conductive equilibrium solution (i.e. no wind), but the PGCM light curves contain wave-like features while the data do not. We do not believe that this feature represents an atmospheric wave; rather, it is numerical noise known to occur in 2D GCMs. The PGCM-predicted zonal

  4. Satellite Observations of Wind Farm Impacts on Nocturnal Land Surface Temperature in Iowa

    Directory of Open Access Journals (Sweden)

    Ronald A. Harris

    2014-12-01

    Full Text Available Wind farms (WFs are believed to have an impact on lower boundary layer meteorology. A recent study examined satellite-measured land surface temperature data (LST and found a local nighttime warming effect attributable to a group of four large WFs in Texas. This study furthers their work by investigating the impacts of five individual WFs in Iowa, where the land surface properties and climate conditions are different from those in Texas. Two methods are used to assess WF impacts: first, compare the spatial coupling between the LST changes (after turbine construction versus before and the geographic layouts of the WFs; second, quantify the LST difference between the WFs and their immediate surroundings (non-WF areas. Each WF shows an irrefutable nighttime warming signal relative to the surrounding areas after their turbines were installed, and these warming signals are generally coupled with the geographic layouts of the wind turbines, especially in summer. This study provides further observational evidence that WFs can cause surface warming at nighttime, and that such a signal can be detected by satellite-based sensors.

  5. Tropical Atlantic biases and their relation to surface wind stress and terrestrial precipitation

    Energy Technology Data Exchange (ETDEWEB)

    Richter, Ingo [Research Institute for Global Change, JAMSTEC, Yokohama (Japan); University of Hawaii at Manoa, International Pacific Research Center, Honolulu, HI (United States); Xie, Shang-Ping [University of Hawaii at Manoa, International Pacific Research Center, Honolulu, HI (United States); University of Hawaii at Manoa, Department of Meteorology, Honolulu, HI (United States); Wittenberg, Andrew T. [NOAA/Geophysical Fluid Dynamics Laboratory, Princeton, NJ (United States); Masumoto, Yukio [Research Institute for Global Change, JAMSTEC, Yokohama (Japan)

    2012-03-15

    Most coupled general circulation models (GCMs) perform poorly in the tropical Atlantic in terms of climatological seasonal cycle and interannual variability. The reasons for this poor performance are investigated in a suite of sensitivity experiments with the Geophysical Fluid Dynamics Laboratory (GFDL) coupled GCM. The experiments show that a significant portion of the equatorial SST biases in the model is due to weaker than observed equatorial easterlies during boreal spring. Due to these weak easterlies, the tilt of the equatorial thermocline is reduced, with shoaling in the west and deepening in the east. The erroneously deep thermocline in the east prevents cold tongue formation in the following season despite vigorous upwelling, thus inhibiting the Bjerknes feedback. It is further shown that the surface wind errors are due, in part, to deficient precipitation over equatorial South America and excessive precipitation over equatorial Africa, which already exist in the uncoupled atmospheric GCM. Additional tests indicate that the precipitation biases are highly sensitive to land surface conditions such as albedo and soil moisture. This suggests that improving the representation of land surface processes in GCMs offers a way of improving their performance in the tropical Atlantic. The weaker than observed equatorial easterlies also contribute remotely, via equatorial and coastal Kelvin waves, to the severe warm SST biases along the southwest African coast. However, the strength of the subtropical anticyclone and along-shore winds also play an important role. (orig.)

  6. The effect of interplanetary magnetic field orientation on the solar wind flux impacting Mercury's surface

    CERN Document Server

    Varela, J; Moncuquet, M

    2016-01-01

    The aim of this paper is to study the plasma flows on the Mercury surface for different interplanetary magnetic field orientations on the day side of the planet. We use a single fluid MHD model in spherical coordinates to simulate the interaction of the solar wind with the Hermean magnetosphere for six solar wind realistic configurations with different magnetic field orientations: Mercury-Sun, Sun-Mercury, aligned with the magnetic axis of Mercury (Northward and Southward) and with the orbital plane perpendicular to the previous cases. In the Mercury-Sun (Sun-Mercury) simulation the Hermean magnetic field is weakened in the South-East (North-East) of the magnetosphere leading to an enhancement of the flows on the South (North) hemisphere. For a Northward (Southward) orientation there is an enhancement (weakening) of the Hermean magnetic field in the nose of the bow shock so the fluxes are reduced and drifted to the poles (enhanced and drifted to the equator). If the solar wind magnetic field is in the orbital...

  7. Dependence of Lunar Surface Charging on Solar Wind Plasma Conditions and Solar Irradiation

    Science.gov (United States)

    Stubbs, T. J.; Farrell, W. M.; Halekas, J. S.; Burchill, J. K.; Collier, M. R.; Zimmerman, M. I.; Vondrak, R. R.; Delory, G. T.; Pfaff, R. F.

    2014-01-01

    The surface of the Moon is electrically charged by exposure to solar radiation on its dayside, as well as by the continuous flux of charged particles from the various plasma environments that surround it. An electric potential develops between the lunar surface and ambient plasma, which manifests itself in a near-surface plasma sheath with a scale height of order the Debye length. This study investigates surface charging on the lunar dayside and near-terminator regions in the solar wind, for which the dominant current sources are usually from the pohotoemission of electrons, J(sub p), and the collection of plasma electrons J(sub e) and ions J(sub i). These currents are dependent on the following six parameters: plasma concentration n(sub 0), electron temperature T(sub e), ion temperature T(sub i), bulk flow velocity V, photoemission current at normal incidence J(sub P0), and photo electron temperature T(sub p). Using a numerical model, derived from a set of eleven basic assumptions, the influence of these six parameters on surface charging - characterized by the equilibrium surface potential, Debye length, and surface electric field - is investigated as a function of solar zenith angle. Overall, T(sub e) is the most important parameter, especially near the terminator, while J(sub P0) and T(sub p) dominate over most of the dayside.

  8. Hall-magnetohydrodynamic surface waves in solar wind flow-structures

    Science.gov (United States)

    Miteva, Rossitsa; Zhelyazkov, Ivan; Erdélyi, Robert

    2004-02-01

    This paper investigates the parallel propagation of agnetohydrodynamic (MHD) surface waves travelling along an ideal steady plasma slab surrounded by a steady plasma environment in the framework of Hall magnetohydrodynamics. The magnitudes of the ambient magnetic field, plasma density and flow velocity inside and outside the slab are different. Two possible directions of the relative flow velocity (in a frame of reference co-moving with the ambient flow) have been studied. In contrast to the conventional MHD surface waves which are usually assumed to be pure surface or pseudo-surface waves, the Hall-MHD approach makes it necessary to treat the normal MHD slab's modes as generalized surface waves. The latter have to be considered as a superposition of two partial waves, one of which is a pure/pseudo-surface-wave whereas the other constitutive wave is a leaky one. From the two kinds of surface-wave modes that can propagate, notably sausage and kink ones, the dispersion behaviour of the kink mode turns out to be more complicated than that of the sausage mode. In general, the flow increases the waves' phase velocities comparing with their magnitudes in a static Hall-MHD plasma slab. The applicability of the results to real solar wind flow-structures is briefly discussed. EHPRG Award Lecture.

  9. Sliding mode control of wind-induced vibrations using fuzzy sliding surface and gain adaptation

    Science.gov (United States)

    Thenozhi, Suresh; Yu, Wen

    2016-04-01

    Although fuzzy/adaptive sliding mode control can reduce the chattering problem in structural vibration control applications, they require the equivalent control and the upper bounds of the system uncertainties. In this paper, we used fuzzy logic to approximate the standard sliding surface and designed a dead-zone adaptive law for tuning the switching gain of the sliding mode control. The stability of the proposed controller is established using Lyapunov stability theory. A six-storey building prototype equipped with an active mass damper has been used to demonstrate the effectiveness of the proposed controller towards the wind-induced vibrations.

  10. Thermal sensing of cryogenic wind tunnel model surfaces Evaluation of silicon diodes

    Science.gov (United States)

    Daryabeigi, K.; Ash, R. L.; Dillon-Townes, L. A.

    1986-01-01

    Different sensors and installation techniques for surface temperature measurement of cryogenic wind tunnel models were investigated. Silicon diodes were selected for further consideration because of their good inherent accuracy. Their average absolute temperature deviation in comparison tests with standard platinum resistance thermometers was found to be 0.2 K in the range from 125 to 273 K. Subsurface temperature measurement was selected as the installation technique in order to minimize aerodynamic interference. Temperature distortion caused by an embedded silicon diode was studied numerically.

  11. Thermal sensing of cryogenic wind tunnel model surfaces - Evaluation of silicon diodes

    Science.gov (United States)

    Daryabeigi, Kamran; Ash, Robert L.; Dillon-Townes, Lawrence A.

    1986-01-01

    Different sensors and installation techniques for surface temperature measurement of cryogenic wind tunnel models were investigated. Silicon diodes were selected for further consideration because of their good inherent accuracy. Their average absolute temperature deviation in comparison tests with standard platinum resistance thermometers was found to be 0.2 K in the range from 125 to 273 K. Subsurface temperature measurement was selected as the installation technique in order to minimize aerodynamic interference. Temperature distortion caused by an embedded silicon diode was studied numerically.

  12. Retrieval of Sea Surface Salinity and Wind from The NASA Soil Moisture Active Passive Mission Data

    Science.gov (United States)

    Yueh, S. H.; Fore, A.; Tang, W.; Hayashi, A.

    2015-12-01

    NASA's Soil Moisture Active Passive (SMAP) mission, the first Earth Science Decadal Survey mission, was launched January 31, 2015 to provide high-resolution, frequent-revisit global mapping of soil moisture. SMAP has two instruments, a polarimetric radiometer and a multi-polarization synthetic aperture radar. Both instruments operate at L-band frequencies (~ 1GHz) and share a single 6-m rotating mesh antenna, producing a fixed incidence angle conical scan at 40⁰ across a 1000-km swath and a 2-3 day global revisit. The SMAP SSS and ocean surface wind retrieval algorithm developed at the Jet Propulsion Laboratory leverages the QuikSCAT and Aquarius algorithms to account for the two-look geometry (fore and aft looks from the conical scan) and dual-polarization observations for simultaneous retrieval of SSS and wind speed. The retrieval algorithm has been applied to more than three months of SMAP radiometer data. Comparison with the European Center for Medium-Range Weather Forecasting (ECMWF) wind speed suggests that the SMAP wind speed reaches an accuracy of about 0.7 ms-1. The preliminary assessment of the SMAP SSS products gridded at 50 km spatial resolution and weekly intervals is promising. The spatial patterns of the SSS agree well with climatological distributions, but exhibit several unique spatial and temporal features. The temporal evolutions of freshwater plumes from several major rivers, such as the Amazon, Niger, Congo, Ganges, and Mississippi, are all consistent with the timing of rainy and dry seasons, indicated in the SMAP's soil moisture products. Rigorous accuracy assessment will be performed by comparison with in situ SSS data from buoys and ARGO floats. The SMAP evaluation products will be released to the public prior to November 2015.

  13. Surface Wind Stresses and Triggering of Global Dust Storms on Mars

    Science.gov (United States)

    Mischna, Michael A.; Shirley, James H.

    2016-10-01

    Global dust storms on Mars occur during summer in the southern hemisphere, but their occurrence in some years and not in others has stubbornly eluded explanation. Shirley (2016, in review, and at arxiv.org/abs/1605.02707) and Mischna and Shirley (2016, in revision, and at arxiv.org/abs/1602.09137) have demonstrated the role of a so-called "coupling term acceleration" (CTA) in modifying the Mars global circulation through potential exchange of Mars' orbital and rotational momenta. The CTA has been incorporated into the MarsWRF general circulation model (GCM), which reveals distinct changes to the circulation due to the CTA, leading to conditions favorable to GDS formation in all years in which perihelion season GDS were observed, and conditions unfavorable in nearly all other years. These circulation changes reveal themselves, in part, through changes in surface wind stress, which is a strong function of near-surface wind speed. We present additional analysis of these results for the past years with perihelion season GDS (7 in total) showing commonalities in the evolution of surface stresses in the season leading up to GDS initiation. Specifically, the enhancement of surface stress during this pre-storm season, arising from the orbit-spin coupling in years with perihelion season storms, presents some common patterns. Among these are the rate and duration of increase of wind stress, and the minimum level of enhancement from the CTA that is apparently required in these years prior to initiation of a GDS. Previously we assessed changes in surface stress using a simple, dust-free model atmosphere. Here, further, we perform parallel simulations for MY 24-27 using realistic dust profiles from TES limb observations. The inclusion of dust in the GCM modifies atmospheric opacity and will alter global atmospheric temperatures leading to a markedly different atmospheric state. We find that the inclusion of dust in the atmosphere reduces the magnitude of surface stresses as

  14. Wind-induced contaminant transport in near-surface soils with application to radon entry into buildings

    Energy Technology Data Exchange (ETDEWEB)

    Riley, W J [Univ. of California, Berkeley, CA (United States)

    1996-05-01

    Indoor air exposures to gaseous contaminants originating in soil can cause large human health risks. To predict and control these exposures, the mechanisms that affect vapor transport in near-surface soils need to be understood. In particular, radon exposure is a concern since average indoor radon concentrations lead to much higher risks than are generally accepted for exposure to other environmental contaminants. This dissertation examines an important component of the indoor radon problem: the impacts of wind on soil-gas and radon transport and entry into buildings. The research includes experimental and modeling studies of wind`s interactions with a building`s superstructure and the resulting soil-gas and radon flows in the surrounding soil. In addition to exploring the effects of steady winds, a novel modeling technique is developed to examine the impacts of fluctuating winds on soil-gas and radon transport.

  15. Onshore and offshore wind resource evaluation in the northeastern area of the Iberian Peninsula: quality assurance of the surface wind observations

    Science.gov (United States)

    Hidalgo, A.; González-Rouco, J. F.; Jiménez, P. A.; Navarro, J.; García-Bustamante, E.; Lucio-Eceiza, E. E.; Montávez, J. P.; García, A. Y.; Prieto, L.

    2012-04-01

    Offshore wind energy is becoming increasingly important as a reliable source of electricity generation. The areas located in the vicinity of the Cantabrian and Mediterranean coasts are areas of interest in this regard. This study targets an assessment of the wind resource focused on the two coastal regions and the strip of land between them, thereby including most of the northeastern part of the Iberian Peninsula (IP) and containing the Ebro basin. The analysis of the wind resource in inland areas is crucial as the wind channeling through the existing mountains has a direct impact on the sea circulations near the coast. The thermal circulations generated by the topography near the coast also influence the offshore wind resource. This work summarizes the results of the first steps of a Quality Assurance (QA) procedure applied to the surface wind database available over the area of interest. The dataset consists of 752 stations compiled from different sources: 14 buoys distributed over the IP coast provided by Puertos del Estado (1990-2010); and 738 land sites over the area of interest provided by 8 different Spanish institutions (1933-2010) and the National Center of Atmospheric Research (NCAR; 1978-2010). It is worth noting that the variety of institutional observational protocols lead to different temporal resolutions and peculiarities that somewhat complicate the QA. The QA applied to the dataset is structured in three steps that involve the detection and suppression of: 1) manipulation errors (i.e. repetitions); 2) unrealistic values and ranges in wind module and direction; 3) abnormally low (e.g. long constant periods) and high variations (e.g. extreme values and inhomogeneities) to ensure the temporal consistency of the time series. A quality controlled observational network of wind variables with such spatial density and temporal length is not frequent and specifically for the IP is not documented in the literature. The final observed dataset will allow for a

  16. Anomalous Arctic surface wind patterns and their impacts on September sea ice minima and trend

    Directory of Open Access Journals (Sweden)

    Bingyi Wu

    2012-05-01

    Full Text Available We used monthly mean surface wind data from the National Centers for Environmental Prediction/National Centers for Atmospheric Research (NCEP/NCAR reanalysis dataset during the period 1979–2010 to describe the first two patterns of Arctic surface wind variability by means of the complex vector empirical orthogonal function (CVEOF analysis. The first two patterns respectively account for 31 and 16% of its total anomalous kinetic energy. The leading pattern consists of the two subpatterns: the northern Laptev Sea (NLS pattern and the Arctic dipole (AD pattern. The second pattern contains the northern Kara Sea (NKS pattern and the central Arctic (CA pattern. Over the past two decades, the combined dynamical forcing of the first two patterns has contributed to Arctic September sea ice extent (SIE minima and its declining trend. September SIE minima are mainly associated with the negative phase of the AD pattern and the positive phase of the CA pattern during the summer (July to September season, and both phases coherently show an anomalous anticyclone over the Arctic Ocean. Wind patterns affect September SIE through their frequency and intensity. The negative trend in September SIE over the past two decades is associated with increased frequency and enhanced intensity of the CA pattern during the melting season from April to September. Thus, it cannot be simply attributed to the AD anomaly characterised by the second empirical orthogonal function mode of sea level pressure north of 70°N. The CA pattern exhibited interdecadal variability in the late 1990s, and an anomalous cyclone prevailed before 1997 and was then replaced by an anomalous anticyclone over the Arctic Ocean that is consistent with the rapid decline trend in September SIE. This paper provides an alternative way to identify the dominant patterns of climate variability and investigate their associated Arctic sea ice variability from a dynamical perspective. Indeed, this study

  17. Requirements for large-eddy simulation of surface wind gusts in a mountain valley

    Science.gov (United States)

    Revell, Michael J.; Purnell, Don; Lauren, Michael K.

    1996-09-01

    During the passage of a front, data from a light-weight cup anemometer and wind vane, sited in a steep-walled glacial valley of the Mt Cook region of the Southern Alps of New Zealand, were analysed to derive a power spectrum of the wind velocity for periods between 0.5 and 16 min. The energy spectrum roughly followed a -5/3 power law over the range of periods from 0.5 4 min — as might be expected in the case of an inertial subrange of eddies. However, any inertial subrange clearly does not extend to periods longer than this. We suggest that the observed eddies were generated in a turbulent wake associated with flow separation at the ridge crests, and large eddies are shed at periods of 4 8 min or more. A compressible fluid-dynamic model, with a Smagorinsky turbulence closure scheme and a “law of the wall” at the surface, was used to calculate flow over a cross section through this area in neutrally stratified conditions. A range of parameters was explored to assess some of the requirements for simulating surface wind gusts in mountainous terrain in New Zealand. In order to approximate the observed wind spectrum at Tasman aerodrome, Mount Cook, we found the model must be three-dimensional, with a horizontal resolution better than 250 m and with a Reynolds-stress eddy viscosity of less than 5 m2 s-1. In two-dimensional simulations, the eddies were too big in size and in amplitude and at the surface this was associated with reversed flow extending too far downstream. In contrast the three-dimensional simulations gave a realistic gusting effect associated with large scale “cat's paws” (a bigger variety of those commonly seen over water downstream of moderate hills), with reversed flow only at the steep part of the lee slope. The simulations were uniformly improved by better resolution, at all tested resolutions down to 250 m mesh size. The spectra of large eddies simulated in steep terrain were not very sensitive to the details of the eddy stress formulation

  18. The dust emission law in the wind erosion process on soil surface

    Institute of Scientific and Technical Information of China (English)

    XING Mao; GUO LieJin

    2009-01-01

    The dust emission models to date cannot describe the relation between the transport rate of different sized grains and their grain size composition in soil surface, so Aeolian grain transport on a soil-like bed composed of fine sand and silt powder was measured in a wind tunnel. Six types of soil-like beds with different silt fractions have been tested in this experiment. The mass flux profiles of silt dust and sand grains are much different due to their different motion modes. Analysis of the vertical distribution of the powder and sand grains reveals that for a given soil bed, the ratio of the horizontal dust flux to the horizontal sand flux is directly proportional to their mass ratio in the bed. The dust flux is closely linked to the sand flux by the bombardment mechanism. For a given wind velocity and grain size of the bed, the slopes of the vertical mass flux profiles of sand grains larger than 100 μm are nearly equal in a log-linear plot and the ratio between the fraction of transport rate of each size group to the whole transport rate and the mass fraction of each size group in the bed is a constant only dependent on grain size. With this law, the transport rate of dust and different sized grains can be related with the grain size composition in the soil surface.

  19. Zonal surface wind jets across the Red Sea due to mountain gap forcing along both sides of the Red Sea

    KAUST Repository

    Jiang, Houshuo

    2009-01-01

    [1] Mesoscale atmospheric modeling over the Red Sea, validated by in-situ meteorological buoy data, identifies two types of coastal mountain gap wind jets that frequently blow across the longitudinal axis of the Red Sea: (1) an eastward-blowing summer daily wind jet originating from the Tokar Gap on the Sudanese Red Sea coast, and (2) wintertime westward-blowing wind-jet bands along the northwestern Saudi Arabian coast, which occur every 10-20 days and can last for several days when occurring. Both wind jets can attain wind speeds over 15 m s-1 and contribute significantly to monthly mean surface wind stress, especially in the cross-axis components, which could be of importance to ocean eddy formation in the Red Sea. The wintertime wind jets can cause significant evaporation and ocean heat loss along the northeastern Red Sea coast and may potentially drive deep convection in that region. An initial characterization of these wind jets is presented. Copyright 2009 by the American Geophysical Union.

  20. The Role of Hierarchy in Response Surface Modeling of Wind Tunnel Data

    Science.gov (United States)

    DeLoach, Richard

    2010-01-01

    This paper is intended as a tutorial introduction to certain aspects of response surface modeling, for the experimentalist who has started to explore these methods as a means of improving productivity and quality in wind tunnel testing and other aerospace applications. A brief review of the productivity advantages of response surface modeling in aerospace research is followed by a description of the advantages of a common coding scheme that scales and centers independent variables. The benefits of model term reduction are reviewed. A constraint on model term reduction with coded factors is described in some detail, which requires such models to be well-formulated, or hierarchical. Examples illustrate the consequences of ignoring this constraint. The implication for automated regression model reduction procedures is discussed, and some opinions formed from the author s experience are offered on coding, model reduction, and hierarchy.

  1. Research on improved design of airfoil profiles based on the continuity of airfoil surface curvature of wind turbines

    DEFF Research Database (Denmark)

    Chen, Jin; Cheng, Jiangtao; Shen, Wenzhong

    2013-01-01

    Aerodynamic of airfoil performance is closely related to the continuity of its surface curvature, and airfoil profiles with a better aerodynamic performance plays an important role in the design of wind turbine. The surface curvature distribution along the chord direction and pressure distributio...

  2. Analysis of the Viking Lander 1 surface wind vector for sols 45 to 375

    Science.gov (United States)

    Leovy, C. B.

    1984-01-01

    The Viking Lander 1 wind sensor data during the period between sols 45 and 375 were corrected. During this period, the heating element of the quadrant sensor which provided the primary signal used for determining wind direction had failed, but both hot film wind sensors were functioning normally. The wind speed and direction corrections are explained.

  3. An optimal design of wind turbine and ship structure based on neuro-response surface method

    Directory of Open Access Journals (Sweden)

    Jae-Chul Lee

    2015-07-01

    Full Text Available The geometry of engineering systems affects their performances. For this reason, the shape of engineering systems needs to be optimized in the initial design stage. However, engineering system design problems consist of multi-objective optimization and the performance analysis using commercial code or numerical analysis is generally time-consuming. To solve these problems, many engineers perform the optimization using the approximation model (response surface. The Response Surface Method (RSM is generally used to predict the system performance in engi-neering research field, but RSM presents some prediction errors for highly nonlinear systems. The major objective of this research is to establish an optimal design method for multi-objective problems and confirm its applicability. The proposed process is composed of three parts: definition of geometry, generation of response surface, and optimization process. To reduce the time for performance analysis and minimize the prediction errors, the approximation model is generated using the Backpropagation Artificial Neural Network (BPANN which is considered as Neuro-Response Surface Method (NRSM. The optimization is done for the generated response surface by non-dominated sorting genetic algorithm-II (NSGA-II. Through case studies of marine system and ship structure (substructure of floating offshore wind turbine considering hydrodynamics performances and bulk carrier bottom stiffened panels considering structure performance, we have confirmed the applicability of the proposed method for multi-objective side constraint optimization problems.

  4. An optimal design of wind turbine and ship structure based on neuro-response surface method

    Directory of Open Access Journals (Sweden)

    Lee Jae-Chul

    2015-07-01

    Full Text Available The geometry of engineering systems affects their performances. For this reason, the shape of engineering systems needs to be optimized in the initial design stage. However, engineering system design problems consist of multi-objective optimization and the performance analysis using commercial code or numerical analysis is generally time-consuming. To solve these problems, many engineers perform the optimization using the approximation model (response surface. The Response Surface Method (RSM is generally used to predict the system performance in engineering research field, but RSM presents some prediction errors for highly nonlinear systems. The major objective of this research is to establish an optimal design method for multi-objective problems and confirm its applicability. The proposed process is composed of three parts: definition of geometry, generation of response surface, and optimization process. To reduce the time for performance analysis and minimize the prediction errors, the approximation model is generated using the Backpropagation Artificial Neural Network (BPANN which is considered as Neuro-Response Surface Method (NRSM. The optimization is done for the generated response surface by non-dominated sorting genetic algorithm-II (NSGA-II. Through case studies of marine system and ship structure (substructure of floating offshore wind turbine considering hydrodynamics performances and bulk carrier bottom stiffened panels considering structure performance, we have confirmed the applicability of the proposed method for multi-objective side constraint optimization problems.

  5. Wind-driven changes of surface current, temperature, and chlorophyll observed by satellites north of New Guinea

    Science.gov (United States)

    Radenac, Marie-Hélène; Léger, Fabien; Messié, Monique; Dutrieux, Pierre; Menkes, Christophe; Eldin, Gérard

    2016-04-01

    Satellite observations of wind, sea level and derived currents, sea surface temperature (SST), and chlorophyll are used to expand our understanding of the physical and biological variability of the ocean surface north of New Guinea. Based on scarce cruise and mooring data, previous studies differentiated a trade wind situation (austral winter) when the New Guinea Coastal Current (NGCC) flows northwestward and a northwest monsoon situation (austral summer) when a coastal upwelling develops and the NGCC reverses. This circulation pattern is confirmed by satellite observations, except in Vitiaz Strait where the surface northwestward flow persists. We find that intraseasonal and seasonal time scale variations explain most of the variance north of New Guinea. SST and chlorophyll variabilities are mainly driven by two processes: penetration of Solomon Sea waters and coastal upwelling. In the trade wind situation, the NGCC transports cold Solomon Sea waters through Vitiaz Strait in a narrow vein hugging the coast. Coastal upwelling is generated in westerly wind situations (westerly wind event, northwest monsoon). Highly productive coastal waters are advected toward the equator and, during some westerly wind events, toward the eastern part of the warm pool. During El Niño, coastal upwelling events and northward penetration of Solomon Sea waters combine to influence SST and chlorophyll anomalies.

  6. The Alignment of the Mean Wind and Stress Vectors in the Unstable Surface Layer

    Science.gov (United States)

    Bernardes, M.; Dias, N. L.

    2010-01-01

    A significant non-alignment between the mean horizontal wind vector and the stress vector was observed for turbulence measurements both above the water surface of a large lake, and over a land surface (soybean crop). Possible causes for this discrepancy such as flow distortion, averaging times and the procedure used for extracting the turbulent fluctuations (low-pass filtering and filter widths etc.), were dismissed after a detailed analysis. Minimum averaging times always less than 30 min were established by calculating ogives, and error bounds for the turbulent stresses were derived with three different approaches, based on integral time scales (first-crossing and lag-window estimates) and on a bootstrap technique. It was found that the mean absolute value of the angle between the mean wind and stress vectors is highly related to atmospheric stability, with the non-alignment increasing distinctively with increasing instability. Given a coordinate rotation that aligns the mean wind with the x direction, this behaviour can be explained by the growth of the relative error of the u- w component with instability. As a result, under more unstable conditions the u- w and the v- w components become of the same order of magnitude, and the local stress vector gives the impression of being non-aligned with the mean wind vector. The relative error of the v- w component is large enough to make it undistinguishable from zero throughout the range of stabilities. Therefore, the standard assumptions of Monin-Obukhov similarity theory hold: it is fair to assume that the v- w stress component is actually zero, and that the non-alignment is a purely statistical effect. An analysis of the dimensionless budgets of the u- w and the v- w components confirms this interpretation, with both shear and buoyant production of u- w decreasing with increasing instability. In the v- w budget, shear production is zero by definition, while buoyancy displays very low-intensity fluctuations around

  7. Correlation between sea surface temperature and wind speed in Greenland Sea and their relationships with NAO variability

    Directory of Open Access Journals (Sweden)

    Bo QU

    2012-09-01

    Full Text Available The North Atlantic Oscillation (NAO is one of the major causes of many recent changes in the Arctic Ocean. Generally, it is related to wind speed, sea surface temperature (SST, and sea ice cover. In this study, we analyzed the distributions of and correlations between SST, wind speed, NAO, and sea ice cover from 2003 to 2009 in the Greenland Sea at 10°W to 10°E, 65°N to 80°N. SST reached its peak in July, while wind speed reached its minimum in July. Seasonal variability of SST and wind speed was different for different regions. SST and wind speed mainly had negative correlations. Detailed correlation research was focused on the 75°N to 80°N band. Regression analysis shows that in this band, the variation of SST lagged three months behind that of wind speed. Ice cover and NAO had a positive correlation, and the correlation coefficient between ice cover and NAO in the year 2007 was 0.61. SST and NAO also had a positive correlation, and SST influenced NAO one month in advance. The correlation coefficients between SST and NAO reached 0.944 for the year 2005, 0.7 for the year 2008, and 0.74 for the year 2009 after shifting SST one month later. NAO also had a positive correlation with wind speed, and it also influenced wind speed one month in advance. The correlation coefficients between NAO and wind speed reached 0.783, 0.813, and 0.818 for the years 2004, 2005, and 2008, respectively, after shifting wind speed one month earlier.

  8. Laboratory investigation and direct numerical simulation of wind effect on steep surface waves

    Science.gov (United States)

    Troitskaya, Yuliya; Sergeev, Daniil; Druzhinin, Oleg; Ermakova, Olga

    2015-04-01

    The small scale ocean-atmosphere interaction at the water-air interface is one of the most important factors determining the processes of heat, mass, and energy exchange in the boundary layers of both geospheres. Another important aspect of the air-sea interaction is excitation of surface waves. One of the most debated open questions of wave modeling is concerned with the wind input in the wave field, especially for the case of steep and breaking waves. Two physical mechanisms are suggested to describe the excitation of finite amplitude waves. The first one is based on the treatment of the wind-wave interaction in quasi-linear approximation in the frameworks of semi-empirical models of turbulence of the low atmospheric boundary layer. An alternative mechanism is associated with separation of wind flow at the crests of the surface waves. The "separating" and "non-separating" mechanisms of wave generation lead to different dependences of the wind growth rate on the wave steepness: the latter predicts a decrease in the increment with wave steepness, and the former - an increase. In this paper the mechanism of the wind-wave interaction is investigated basing on physical and numerical experiments. In the physical experiment, turbulent airflow over waves was studied using the video-PIV method, based on the application of high-speed video photography. Alternatively to the classical PIV technique this approach provides the statistical ensembles of realizations of instantaneous velocity fields. Experiments were performed in a round wind-wave channel at Institute of Applied Physics, Russian Academy of Sciences. A fan generated the airflow with the centerline velocity 4 m/s. The surface waves were generated by a programmed wave-maker at the frequency of 2.5 Hz with the amplitudes of 0.65 cm, 1.4 cm, and 2 cm. The working area (27.4 × 10.7 cm2) was at a distance of 3 m from the fan. To perform the measurements of the instantaneous velocity fields, spherical polyamide

  9. Wind and sunlight shape microbial diversity in surface waters of the North Pacific Subtropical Gyre

    Science.gov (United States)

    Bryant, Jessica A; Aylward, Frank O; Eppley, John M; Karl, David M; Church, Matthew J; DeLong, Edward F

    2016-01-01

    Few microbial time-series studies have been conducted in open ocean habitats having low seasonal variability such as the North Pacific Subtropical Gyre (NPSG), where surface waters experience comparatively mild seasonal variation. To better describe microbial seasonal variability in this habitat, we analyzed rRNA amplicon and shotgun metagenomic data over two years at the Hawaii Ocean Time-series Station ALOHA. We postulated that this relatively stable habitat might reveal different environmental factors that influence planktonic microbial community diversity than those previously observed in more seasonally dynamic habitats. Unexpectedly, the data showed that microbial diversity at 25 m was positively correlated with average wind speed 3 to 10 days prior to sampling. In addition, microbial community composition at 25 m exhibited significant correlations with solar irradiance. Many bacterial groups whose relative abundances varied with solar radiation corresponded to taxa known to exhibit strong seasonality in other oceanic regions. Network co-correlation analysis of 25 m communities showed seasonal transitions in composition, and distinct successional cohorts of co-occurring phylogenetic groups. Similar network analyses of metagenomic data also indicated distinct seasonality in genes originating from cyanophage, and several bacterial clades including SAR116 and SAR324. At 500 m, microbial community diversity and composition did not vary significantly with any measured environmental parameters. The minimal seasonal variability in the NPSG facilitated detection of more subtle environmental influences, such as episodic wind variation, on surface water microbial diversity. Community composition in NPSG surface waters varied in response to solar irradiance, but less dramatically than reported in other ocean provinces. PMID:26645474

  10. Solar Wind Electron Interaction with the Dayside Lunar Surface and Crustal Magnetic Fields: Evidence for Precursor Effects

    Science.gov (United States)

    Halekas, Jasper S.; Poppe, A.; Delory, G. T.; Farrell, W. M.; Horanyi, M.

    2012-01-01

    Electron distributions measured by Lunar Prospector above the dayside lunar surface in the solar wind often have an energy dependent loss cone, inconsistent with adiabatic magnetic reflection. Energy dependent reflection suggests the presence of downward parallel electric fields below the spacecraft, possibly indicating the presence of a standing electrostatic structure. Many electron distributions contain apparent low energy (solar wind electrons, possibly indicating streaming and/or whistler instabilities. The Moon may therefore influence solar wind plasma well upstream from its surface. Magnetic anomaly interactions and/or non-monotonic near surface potentials provide the most likely candidates to produce the observed precursor effects, which may help ensure quasi-neutrality upstream from the Moon.

  11. Aerodynamic noise characterization of a full-scale wind turbine through high-frequency surface pressure measurements

    DEFF Research Database (Denmark)

    Bertagnolio, Franck; Aagaard Madsen, Helge; Bak, Christian;

    2015-01-01

    The aim of this work is to investigate and characterize the high-frequency surface pressure fluctuations on a full-scale wind turbine blade and in particular the influence of the atmospheric turbulence. As these fluctuations are highly correlated to the sources of both turbulent inflow noise...... wind turbine with a 80 m diameter rotor as well as measurements of an airfoil section tested in a wind tunnel. The turbine was extensively equipped in order to monitor the local inflow onto the rotating blades. Further a section of the 38 m long blade was instrumented with 50 microphones flush......-mounted relative to the blade surface. The measurements of surface pressure spectra are compared with the results of two engineering models for trailing edge noise and for turbulent inflow noise. The measured pressure fluctuations are related to the local inflow angle and are also compared to measurements...

  12. Tropical Pacific Sea Surface Temperature Anomalies, El Niño, and Equatorial Westerly Wind Events*.

    Science.gov (United States)

    Vecchi, Gabriel A.; Harrison, D. E.

    2000-06-01

    The authors examine global statistical relationships between westerly wind events (WWEs) and sea surface temperature anomaly (SSTA) variability, using a compositing technique for the period 1986-98. The authors describe the extent to which equatorial WWEs are associated with central and eastern equatorial Pacific waveguide warming and with local SSTA changes under the WWE. Their goal is to quantify the extent to which equatorial WWEs are fundamental to the onset and maintenance of warm El Niño-Southern Oscillation conditions. In order to understand the effect of WWEs on SSTA evolution, they begin by examining how SSTA changes in the absence of equatorial WWEs. They find that SSTA tends toward mean climate values in the absence of equatorial WWEs, whether the eastern equatorial Pacific has close to normal SSTA or warmer than normal SSTA.The two equatorial WWE types whose main surface wind anomalies are west of the date line are associated with weak local surface cooling. The equatorial WWE type that has equatorial westerly wind anomalies east of the date line is associated with weak warming under those anomalies, when the eastern equatorial Pacific SSTA is close to normal.When the tropical Pacific has near-normal eastern equatorial Pacific SST, each of the equatorial WWE types is followed by substantial equatorial waveguide warming in the central and eastern Pacific (composite warming as large as 1.0°C); also more than 50% of the large-amplitude WWEs were followed by Niño-3 SSTA warming in excess of 0.5°C. These changes are of similar amplitude and spatial structure as those seen in the onset of El Niño and are consistent with the predicted oceanic response to WWE forcing. When the eastern equatorial Pacific is initially warmer than usual, the two westernmost equatorial WWE types are associated with the maintenance of warm El Niño eastern and central Pacific SSTA; these warm anomalies tend to disappear in the absence of those WWE types. WWEs, or some mechanism

  13. A comparison of three approaches for simulating fine-scale surface winds in support of wildland fire management: Part I. Model formulation and comparison against measurements

    Science.gov (United States)

    Jason M. Forthofer; Bret W. Butler; Natalie S. Wagenbrenner

    2014-01-01

    For this study three types of wind models have been defined for simulating surface wind flow in support of wildland fire management: (1) a uniform wind field (typically acquired from coarse-resolution (,4 km) weather service forecast models); (2) a newly developed mass-conserving model and (3) a newly developed mass and momentumconserving model (referred to as the...

  14. Surface river plume in a large lake under wind forcing: Observations and laboratory experiments

    Science.gov (United States)

    Demchenko, Natalia; He, Cheng; Rao, Yerubandi R.; Valipour, Reza

    2017-10-01

    Observations of a small riverine plume (Grand River, ON) in the nearshore zones of Lake Erie were analyzed to describe its spatial variability and its thickness under different wind forcing conditions during late spring of 2012. Observational results reveal a well-marked frontal region in the vicinity of the river mouth, causing the plume to discharge into the lake in the surface layers (positive buoyant). Wind driven alongshore currents at the mid-depth had speeds of 2-9 cm/s, in comparison to those in the cross-shore 3-6 cm/s, which transported the plume along the shore during the measurement period. Series of laboratory experiments were conducted to obtain the propagation speed (U) of the buoyant plume in terms of buoyancy anomaly (Ba), Richardson number (Ri), dimensionless time (t‧), and aspect ratio (A). Based on our experiments, we developed two non-dimensional relationships describing the speed of propagation (U) as U/Ba1/2 = 8 Ri-1/2t‧1/3A and the plume thickness (h) as h/H = 0.8 Ri-1/4t‧1/2A in the water depth (H), which are in agreement with field observations.

  15. Correlations of global sea surface temperatures with the solar wind speed

    Science.gov (United States)

    Zhou, Limin; Tinsley, Brian; Chu, Huimin; Xiao, Ziniu

    2016-11-01

    A significant correlation between the solar wind speed (SWS) and sea surface temperature (SST) in the region of the North Atlantic Ocean has been found for the Northern Hemisphere winter from 1963 to 2010, based on 3-month seasonal averages. The correlation is dependent on Bz (the interplanetary magnetic field component parallel to the Earth's magnetic dipole) as well as the SWS, and somewhat stronger in the stratospheric quasi-biennial oscillation (QBO) west phase than in the east phase. The correlations with the SWS are stronger than those with the F10.7 parameter representing solar UV inputs to the stratosphere. SST responds to changes in tropospheric dynamics via wind stress, and to changes in cloud cover affecting the radiative balance. Suggested mechanisms for the solar influence on SST include changes in atmospheric ionization and cloud microphysics affecting cloud cover, storm invigoration, and tropospheric dynamics. Such changes modify upward wave propagation to the stratosphere, affecting the dynamics of the polar vortex. Also, direct solar inputs, including energetic particles and solar UV, produce stratospheric dynamical changes. Downward propagation of stratospheric dynamical changes eventually further perturbs tropospheric dynamics and SST.

  16. Final Report DE-EE0005380: Assessment of Offshore Wind Farm Effects on Sea Surface, Subsurface and Airborne Electronic Systems

    Energy Technology Data Exchange (ETDEWEB)

    Ling, Hao [The University of Texas at Austin; Hamilton, Mark F. [The University of Texas at Austin Applied Research Laboratories; Bhalla, Rajan [Science Applications International Corporation; Brown, Walter E. [The University of Texas at Austin Applied Research Laboratories; Hay, Todd A. [The University of Texas at Austin Applied Research Laboratories; Whitelonis, Nicholas J. [The University of Texas at Austin; Yang, Shang-Te [The University of Texas at Austin; Naqvi, Aale R. [The University of Texas at Austin

    2013-09-30

    Offshore wind energy is a valuable resource that can provide a significant boost to the US renewable energy portfolio. A current constraint to the development of offshore wind farms is the potential for interference to be caused by large wind farms on existing electronic and acoustical equipment such as radar and sonar systems for surveillance, navigation and communications. The US Department of Energy funded this study as an objective assessment of possible interference to various types of equipment operating in the marine environment where offshore wind farms could be installed. The objective of this project was to conduct a baseline evaluation of electromagnetic and acoustical challenges to sea surface, subsurface and airborne electronic systems presented by offshore wind farms. To accomplish this goal, the following tasks were carried out: (1) survey electronic systems that can potentially be impacted by large offshore wind farms, and identify impact assessment studies and research and development activities both within and outside the US, (2) engage key stakeholders to identify their possible concerns and operating requirements, (3) conduct first-principle modeling on the interactions of electromagnetic signals with, and the radiation of underwater acoustic signals from, offshore wind farms to evaluate the effect of such interactions on electronic systems, and (4) provide impact assessments, recommend mitigation methods, prioritize future research directions, and disseminate project findings. This report provides a detailed description of the methodologies used to carry out the study, key findings of the study, and a list of recommendations derived based the findings.

  17. The Application of Surface Potential Test on Hand-making Insulation for Generator Stator End-winding

    Science.gov (United States)

    Lu, Zhu-mao; Liu, Qing; Wang, Tian-zheng; Bai, Lu; Li, Yan-peng

    2017-05-01

    This paper presents the advantage of surface potential test on hand-making insulation for generator stator end-winding insulation detection, compared with DC or AC withstand voltage test, also details the test principle, connection method and test notes. And through the case, surface potential test on hand-making insulation proved effective for insulation quality detection after generator stator end-winding maintenance, and the experimental data is useful and reliable for the electrical equipment operation and maintenance in the power plant.

  18. 不同下垫面近地层风速廓线特征%Characteristics of Surface layer Wind Speed Profiles over Different Underlying Surfaces

    Institute of Scientific and Technical Information of China (English)

    李鹏; 田景奎

    2011-01-01

    China’s wind-rich areas are primarily distributed in coastal areas and the Three North region. In order to reasonably assess wind resources and effectively exploit wind energy over these regions, 668,572 surface layer wind profiles from thirteen tall wind towers were collected. The wind towers are 70 m high and there are 4~5 layers for measurement wind velocity. Underlying surface characteristics of these wind towers are different. In general, there are three types of terrain, i.e., coastal areas, mountainous areas, and plains. Vegetation varies greatly with terrain, resulting in varying roughness. This study investigated characteristics of surface layer wind profiles over different underlying surfaces. Results show that the structure of the surface layer wind speed profiles is different. There are seven types of wind speed profiles. The wind speed decreases with height at some levels, but the wind speed increasing with height is predominate, with 70% of profiles pertaining to the increasing type. Each wind profile can be fitted using the simplified power exponential function. The exponent is named shear exponent. The annual average shear exponent (α-) and the shear exponent of annual average profile ( αv-) were derived,that means there's two shear exponents at one wind tower. The former is used in wind power projects and the latter is used in meteorology. [α] is similar for the same type of underlying surfaces, but [αv] varies with the underlying surface. For example, the shear exponent of the annual average profile will vary from 0.15 to 0.23 at five wind towers in Inner Mongolia, located at the same latitude, and the underlying surface is grassland. Only for the strong wind ( 8m/s) segment, there is no obvious difference between two shear exponents. In general, the shear exponents vary with surface roughness, topography, and wind speed magnitude as well as its instability. The shear exponent of plains is generally larger than mountainous

  19. Towards the modelling of pedestrian wind speed using high-resolution digital surface models and statistical methods

    Science.gov (United States)

    Johansson, Lars; Onomura, Shiho; Lindberg, Fredrik; Seaquist, Jonathan

    2016-04-01

    Wind is a complex phenomenon and a critical factor in assessing climatic conditions and pedestrian comfort within cities. To obtain spatial information on near-ground wind speed, 3D computational fluid dynamics (CFD) modelling is often used. This is a computationally intensive method which requires extensive computer resources and is time consuming. By using a simpler 2D method, larger areas can be processed and less time is required. This study attempts to model the relationship between near-ground wind speed and urban geometry using 2.5D raster data and variable selection methods. Such models can be implemented in a geographic information system (GIS) to assess the spatial distribution of wind speed at street level in complex urban environments at scales from neighbourhood to city. Wind speed data, 2 m above ground, is obtained from simulations by CFD modelling and used as a response variable. A number of derivatives calculated from high-resolution digital surface models (DSM) are used as potential predictors. A sequential variable selection algorithm followed by all-possible subset regression was used to select candidate models for further evaluation. The results show that the selected models explain general spatial wind speed pattern characteristics but the prediction errors are large, especially so in areas with high wind speeds. However, all selected models did explain 90 % of the wind speed variability (R 2 ≈ 0.90). Predictors adding information on width and height ratio and alignment of street canyons with respect to wind direction are suggested for improving model performance. To assess the applicability of any derived model, the results of the CFD model should be thoroughly evaluated against field measurements.

  20. Relevance of wildfires on dust emissions via interaction with near-surface wind pattern

    Science.gov (United States)

    Wagner, Robert; Jähn, Michael; Schepanski, Kerstin

    2017-04-01

    Mineral dust is a key player in the Earth system and shows diverse impacts on the radiation budget, cloud microphysics, marine and terrestrial ecosystems. Eventually, it also affects our modern way of life. Not only dust emissions from barren or unvegetated soil surfaces like deserts or uncultivated croplands are important sources of airborne mineral dust. Also, during fire events dust is entrained into the atmosphere and appears to contribute noteworthy to the atmospheric dust burden. The underlying process, which drives dust entrainment during fires, is the so-called pyro-convection. The high temperatures in the center of a fire result in an upward motion of the heated air. Subsequently, air flows towards the fire replacing the raising air. The resulting accelerated winds are able to mobilize soil and dust particles up to a size of several millimeters, depending of both the size and the strength of the fire. Several measurements have shown that up to 80% of the mass fraction of the emitted particles during natural or prescribed fires is related to soil or dust particles. The particles are then mixed externally with the combustion aerosols into the convective updraft and were finally inject into altitudes above the planetary boundary layer where they can be distributed and transported over long distances by the atmospheric circulation. To investigate the impacts of such fires on the near-surface wind pattern and the potential for dust emissions via exceeding typical threshold velocities, high resolved Large-Eddy Simulations (LES) with the All Scale Atmospheric Model (ASAM) were executed. In the framework of this study, the influences of different fire properties (fire intensity, size, and shape) and different atmospheric conditions on the strength and extent of fire-related winds and finally their relevance for dust emissions were investigated using sensitivity studies. Prescribed fires are omnipresent during dry seasons and pyro-convection is a mechanism

  1. Wind Tunnel Study on Flows over Various Two-dimensional Idealized Urban-liked Surfaces

    Science.gov (United States)

    Ho, Yat-Kiu; Liu, Chun-Ho

    2013-04-01

    Extensive human activities (e.g. increased traffic emissions) emit a wide range of pollutants resulting in poor urban area air quality. Unlike open, flat and homogenous rural terrain, urban surface is complicated by the presence of buildings, obstacles and narrow streets. The irregular urban surfaces thus form a random roughness that further modifies the near-surface flows and pollutant dispersion. In this study, a physical modelling approach is employed to commence a series of wind tunnel experiments to study the urban-area air pollution problems. The flow characteristics over different hypothetical urban roughness surfaces were studied in a wind tunnel in isothermal conditions. Preliminary experiments were conducted based on six types of idealized two-dimensional (2D) street canyon models with various building-height-to-street-width (aspect) ratios (ARs) 1, 1/2, 1/4, 1/8, 1/10 and 1/12. The main instrumentation is an in-house 90o X-hotwire anemometry. In each set of configuration, a sampling street canyon was selected near the end of the streamwise domain. Its roof level, i.e. the transverse between the mid points of the upstream and downstream buildings, was divided into eight segments. The measurements were then recorded on the mid-plane of the spannwise domain along the vertical profile (from building roof level to the ceiling of wind tunnel) of the eight segments. All the data acquisition processes were handled by the NI data acquisition modules, NI 9239 and CompactDAQ-9188 hardware. Velocity calculation was carried out in the post-processing stage on a digital computer. The two-component flow velocities and velocity fluctuations were calculated at each sampling points, therefore, for each model, a streamwise average of eight vertical profiles of mean velocity and velocity fluctuations was presented. A plot of air-exchange rate (ACH) against ARs was also presented in order to examine the ventilation performance of different tested models. Preliminary results

  2. Trends in significant wave height and surface wind speed in the China Seas between 1988 and 2011

    Science.gov (United States)

    Zheng, Chongwei; Zhang, Ren; Shi, Weilai; Li, Xin; Chen, Xuan

    2017-10-01

    Wind and waves are key components of the climate system as they drive air-sea interactions and influence weather systems and atmospheric circulation. In marine environments, understanding surface wind and wave fields and their evolution over time is important for conducting safe and efficient human activities, such as navigation and engineering. This study considers long-term trends in the sea surface wind speed (WS) and significant wave height (SWH) in the China Seas over the period 1988-2011 using the Cross-Calibrated Multi-Platform (CCMP) ocean surface wind product and a 24-year hindcast wave dataset obtained from the WAVEWATCH-III (WW3) wave model forced with CCMP winds. The long-term trends in WS and SWH in the China Seas are analyzed over the past 24 years to provide a reference point from which to assess future climate change and offshore wind and wave energy resource development in the region. Results demonstrate that over the period 1988-2011 in the China Seas: 1) WS and SWH showed a significant increasing trend of 3.38 cm s-1 yr-1 and 1.52 cm yr-1, respectively; 2) there were notable regional differences in the long-term trends of WS and SWH; 3) areas with strong increasing trends were located mainly in the middle of the Tsushima Strait, the northern and southern areas of the Taiwan Strait, and in nearshore regions of the northern South China Sea; and 4) the long-term trend in WS was closely associated with El Niño and a significant increase in the occurrence of gale force winds in the region.

  3. Field study and numerical modeling of wind and surface waves at the middle-sized water body

    Science.gov (United States)

    Baydakov, Georgy; Kuznetsova, Alexandra; Sergeev, Daniil; Papko, Vladislav; Kandaurov, Alexander; Vdovin, Maxim; Troitskaya, Yuliya

    2015-04-01

    This paper presents the results of field experiments on studying the wind and waves over inland waters, which were carried out at the Gorky Reservoir in 2011-2014. The sensors were positioned at the oceanographic Froude buoy including five two-component ultrasonic sensors WindSonic by Gill Instruments at different levels (0.1, 0.85, 1.3, 2.27, 5.26 meters above the mean water surface level), one water and three air temperature sensors, and three-channel wire wave gauge. From the measured profiles of wind speed, we calculated basic parameters of the atmospheric boundary layer: the friction velocity u*, the wind speed at the standard height of 10 m U10 and the drag coefficient CD. Parameters were obtained in the range of wind speeds of 1-10 m/s. For wind speeds stronger than 3 m/s CD values were lower than those obtained before (see eg. [1,2]) and those predicted by the bulk parameterization. In the range of wind speeds of 3-5 m/s CD values are even lower than the corresponding smooth flow. However, for weak winds (less than 2.5 m/s) CD values considerably higher than expected ones. The main peculiarity of our measurements is very low location of the lowest sensor: 0.1 m against 0.89 m in [1] and 0.5 m in [2]. Moreover, the lowest sensor was not fixed on the mast, but was located on the float and followed the water surface. Analysis shows that the obtained parameters of profile are almost independent on the number of approximated wind speed levels if they include the lowest sensor. But excluding the lowest sensor gave larger values of CD similar to [1] and [2]. These results demonstrate importance of wind speed measuring close to the water surface. The new parameterization of surface drag coefficient was proposed on the basis of the obtained data. The new surface drag parameterization was used in WAVEWATCH III model applied for modeling waves at the reservoir. 1-D spectra of the field experiment were compared with those obtained in the numerical experiments with

  4. Reconstruction of the surface-layer vertical structure from measurements of wind, temperature and humidity at two levels

    Science.gov (United States)

    Musson-Genon, Luc; Dupont, Eric; Wendum, Denis

    2007-08-01

    We present a comparison between several methods used to reconstruct fluxes and vertical profiles of wind, temperature and humidity from measurements at two levels in the atmospheric surface layer for different practical applications. An analytical method and an iterative method are tested by evaluating the quality of estimations of surface fluxes from detailed field measurements obtained during a campaign on the site of Lannemezan in the south-west of France. The iterative method yields better results, but the analytical one can give results of the same level of accuracy provided that specific constants in its formulation are modified. Then these techniques are applied to wind and temperature reconstruction for an experiment dedicated to wind power estimates over flat terrain. If turbulent fluxes are not needed, a simple power law appears to be sufficient, as the method based on Monin-Obukhov theory does not improve the accuracy of the vertical profile reconstruction.

  5. Near-surface wind fields for San Francisco Bay--historical and 21st century projected time series

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — To support Coastal Storm Modeling System (CoSMoS) in the San Francisco Bay (v2.1), time series of historical and 21st-century near-surface wind fields (eastward and...

  6. Clear-sky stable boundary layers with low winds over snow-covered surfaces Part I: A WRF model evaluation

    NARCIS (Netherlands)

    Sterk, H.A.M.; Steeneveld, G.J.; Vihma, T.; Anderson, P.S.; Bosveld, F.C.; Holtslag, A.A.M.

    2015-01-01

    In this paper we evaluated the Weather Research and Forecasting (WRF) mesoscale meteorological model for stable conditions at clear skies with low wind speeds. Three contrasting terrains with snow covered surfaces are considered, namely Cabauw (Netherlands, snow over grass), Sodankylä (Finland, snow

  7. Validation of simulations of an underwater acoustic communication channel characterized by wind-generated surface waves and bubbles

    NARCIS (Netherlands)

    Dol, H.S.; Colin, M.E.G.D.; Ainlie, M.A.; Gerdes, F.; Schäfke, A.; Özkan Sertlekc, H.

    2013-01-01

    This paper shows that it is possible to simulate realistic shallow-water acoustic communication channels using available acoustic propagation models. Key factor is the incorporation of realistic time-dependent sea surface conditions, including both waves and bubbles due to wind.

  8. Solar wind reflection from the lunar surface: The view from far and near

    CERN Document Server

    Saul, L; Vorburger, A; M., D F Rodríguez; Fuselier, S A; McComas, D J; Möbius, E; Barabash, S; Funsten, Herb; Janzen, Paul

    2013-01-01

    The Moon appears bright in the sky as a source of energetic neutral atoms (ENAs). These ENAs have recently been imaged over a broad energy range both from near the lunar surface, by India's Chandrayaan-1 mission (CH-1), and from a much more distant Earth orbit by NASA's Interstellar Boundary Explorer (IBEX) satellite. Both sets of observations have indicated that a relatively large fraction of the solar wind is reflected from the Moon as energetic neutral hydrogen. CH-1's angular resolution over different viewing angles of the lunar surface has enabled measurement of the emission as a function of angle. IBEX in contrast views not just a swath but a whole quadrant of the Moon as effectively a single pixel, as it subtends even at the closest approach no more than a few degrees on the sky. Here we use the scattering function measured by CH-1 to model global lunar ENA emission and combine these with IBEX observations. The deduced global reflection is modestly larger (by a factor of 1.25) when the angular scatteri...

  9. Two-dimensional curvature of large angle interplanetary MHD discontinuity surfaces: IMP-8 and WIND observations

    Science.gov (United States)

    Lepping, R. P.; Wu, C.-C.; McClernan, K.

    2003-07-01

    This study examines the degree of two-dimensional curvature of solar wind directional discontinuity (DD) surfaces at 1 AU using magnetic field, density, and velocity data from the WIND and IMP-8 spacecraft for a large number (N = 134) of carefully selected events having large "discontinuity angles" of 90° or greater. The discontinuity angle (ω) is measured in the DD's current sheet, the normal (n) to which is estimated by field variance analysis. The fundamental analysis depends on estimates of these DD surface normals at the two spacecraft and the DD's center-times and positions. On average, the transit time from one DD sighting to the other was 36 minutes, and the associated distance along the normal direction was 137 RE. The transition-interval lengths across the DDs are translated into thicknesses and examined for the amount of change between the two spacecraft observing points. The average thickness is relatively large, 14 RE.; the most probable thickness is ≈6 RE. All relevant quantities are examined statistically to establish their distributions, average, and degree of change. A weighted average of the radius of curvature is estimated to be 380 RE, but its most probable value is 290 RE. The average ω is 140° with a relatively large spread (σ = 28°). The average direction of propagation is: longitude (ϕn) = 194° and latitude (θn) = 7° (but = 27°), where ϕn = 0° is sunward and θn = 0° is the ecliptic plane. Various parameters are studied with respect to DD type, i.e., rotational or tangential discontinuity (RD or TD), defined in terms of the "ratio" (in percent) of speed of propagation to net speed of the DD surface, where the net speed is the sum of the convection velocity (along n) plus the propagation speed. The RD %-ratio is moderately small, but the TD ratio is very small or zero. The results by this definition of type are favorably compared to those from the more conventional method, which depends on the absolute strength of the normal

  10. The 2-D Curvature of Large Angle Interplanetary MHD Discontinuity Surfaces: IMP-8 and WIND Observations

    Science.gov (United States)

    Lepping, R. P.; Wu, C.; McClernan, K.

    2002-12-01

    This study examines the degree of 2-D curvature of solar wind directional discontinuity (DD) surfaces at 1 AU using magnetic field, density, and velocity data from the WIND and IMP-8 spacecraft for a large number (N = 134) of carefully selected events having large ``discontinuity angles" of 90° or greater. The discontinuity angle (ω ) is measured in the DDs current sheet, the normal to which is estimated by field variance analysis. The fundamental analysis depends on estimates of these DD surface normals at the two spacecraft, and the DDs center-times and positions. On average, the transit time from one DD sighting to the other was 36 minutes, and the associated distance along the normal direction was 137 RE. The transition-interval lengths across the DDs are translated into thicknesses and examined for the amount of change between the two spacecraft observing points; average thickness is relatively large, 14 RE. All relevant quantities are examined statistically to establish their distributions, average, and degree of change. A weighted average of the radius of curvature is estimated to be 380 RE, but its most probably value is 290 RE. The average ω is 140° with a relatively large spread (σ =28°). The average direction of propagation is: longitude = 194° and latitude = 7° (but = 27°). Various parameters are studied with respect to DD type, defined in terms the ratio of speed of propagation to net speed (``ratio") of the DD surface, (the RD ratio is high and the TD ratio is very low or zero). The results by this definition of type are favorably compared to those from the more conventional method, which depends on the absolute strength of the normal component of the magnetic field. There is little difference in any average parameter value according to type. However, the average ω appears to depend slightly on type with the for the RDs being smaller. A DDs type was shown to change in either direction between the two observation positions about 40% of the

  11. Quantifying the impact of sub-grid surface wind variability on sea salt and dust emissions in CAM5

    Science.gov (United States)

    Zhang, Kai; Zhao, Chun; Wan, Hui; Qian, Yun; Easter, Richard C.; Ghan, Steven J.; Sakaguchi, Koichi; Liu, Xiaohong

    2016-02-01

    This paper evaluates the impact of sub-grid variability of surface wind on sea salt and dust emissions in the Community Atmosphere Model version 5 (CAM5). The basic strategy is to calculate emission fluxes multiple times, using different wind speed samples of a Weibull probability distribution derived from model-predicted grid-box mean quantities. In order to derive the Weibull distribution, the sub-grid standard deviation of surface wind speed is estimated by taking into account four mechanisms: turbulence under neutral and stable conditions, dry convective eddies, moist convective eddies over the ocean, and air motions induced by mesoscale systems and fine-scale topography over land. The contributions of turbulence and dry convective eddy are parameterized using schemes from the literature. Wind variabilities caused by moist convective eddies and fine-scale topography are estimated using empirical relationships derived from an operational weather analysis data set at 15 km resolution. The estimated sub-grid standard deviations of surface wind speed agree well with reference results derived from 1 year of global weather analysis at 15 km resolution and from two regional model simulations with 3 km grid spacing.The wind-distribution-based emission calculations are implemented in CAM5. In terms of computational cost, the increase in total simulation time turns out to be less than 3 %. Simulations at 2° resolution indicate that sub-grid wind variability has relatively small impacts (about 7 % increase) on the global annual mean emission of sea salt aerosols, but considerable influence on the emission of dust. Among the considered mechanisms, dry convective eddies and mesoscale flows associated with topography are major causes of dust emission enhancement. With all the four mechanisms included and without additional adjustment of uncertain parameters in the model, the simulated global and annual mean dust emission increase by about 50 % compared to the default model

  12. The impact of grid and spectral nudging on the variance of the near-surface wind speed

    DEFF Research Database (Denmark)

    Vincent, Claire Louise; Hahmann, Andrea N.

    2015-01-01

    variance in the Weather Research and Forecasting model is analyzed. Simulations are run on nested domains with horizontal grid spacing 15 and 5 km over the Baltic Sea region. For the 15 km domain, 36-hr simulations initialized each day are compared with 11-day simulations with either grid or spectral......Grid and spectral nudging are effective ways of preventing drift from large scale weather patterns in regional climate models. However, the effect of nudging on the wind-speed variance is unclear. In this study, the impact of grid and spectral nudging on near-surface and upper boundary layer wind...

  13. Using CYGNSS to Observe Convectively Driven Near-Surface Winds in Tropical Precipitation Systems During Madden-Julian Oscillation Events

    Science.gov (United States)

    Lang, Timothy J.; Li, Xuanli; Mecikalski, John; Hoover, Kacie; Castillo, Tyler; Chronis, Themis

    2017-01-01

    The Cyclone Global Navigation OKLMA 1411 UTC Satellite System (CYGNSS) is a multi-satellite constellation that launched 15 December 2016. The primary objective of CYGNSS is to use bistatic Global Positioning System (GPS) reflectometry to accurately measure near-surface wind speeds within the heavily raining inner core of tropical cyclones. CYGNSS also features rapid revisit times over a given region in the tropics - ranging from several minutes to a few hours, depending on the constellation geometry at that time. Despite the focus on tropical cyclones, the ability of CYGNSS to provide rapid updates of winds, unbiased by the presence of precipitation, has many other potential applications related to general tropical convection.

  14. The gravitational signature of internal flows in giant planets: Comparing the thermal wind approach with barotropic potential-surface methods

    Science.gov (United States)

    Kaspi, Y.; Davighi, J. E.; Galanti, E.; Hubbard, W. B.

    2016-09-01

    The upcoming Juno and Cassini gravity measurements of Jupiter and Saturn, respectively, will allow probing the internal dynamics of these planets through accurate analysis of their gravity spectra. To date, two general approaches have been suggested for relating the flow velocities and gravity fields. In the first, barotropic potential surface models, which naturally take into account the oblateness of the planet, are used to calculate the gravity field. However, barotropicity restricts the flows to be constant along cylinders parallel to the rotation axis. The second approach, calculated in the reference frame of the rotating planet, assumes that due to the large scale and rapid rotation of these planets, the winds are to leading order in geostrophic balance. Therefore, thermal wind balance relates the wind shear to the density gradients. While this approach can take into account any internal flow structure, it is limited to only calculating the dynamical gravity contributions, and has traditionally assumed spherical symmetry. This study comes to relate the two approaches both from a theoretical perspective, showing that they are analytically identical in the barotropic limit, and numerically, through systematically comparing the different model solutions for the gravity harmonics. For the barotropic potential surface models we employ two independent solution methods - the potential-theory and Maclaurin spheroid methods. We find that despite the sphericity assumption, in the barotropic limit the thermal wind solutions match well the barotropic oblate potential-surface solutions.

  15. The Mathematical Representation of Wind Speed and Temperature Profiles in the Unstable Atmospheric Surface Layer

    DEFF Research Database (Denmark)

    Paulson, C.A.

    1970-01-01

    Analytical expressions which specify non-dimensionalized wind speed and potential temperature gradients as functions of stability are integrated. The integrated equations are tested against Swinhank's wind and temperature profiles measured at Kerang, Australia. It is found that a representation s...... suggested independently by Businger and by Dyer gives the best fit to temperature profiles and describes the wind profiles equally as well as a relation suggested by Panofsky et al....

  16. North Atlantic atmospheric circulation and surface wind in the Northeast of the Iberian Peninsula: uncertainty and long term downscaled variability

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Bustamante, E.; Jimenez, P.A. [CIEMAT, Departamento de Energias Renovables, Madrid (Spain); Universidad Complutense de Madrid, Departamento de Astrofisica y CC. de la Atmosfera, Madrid (Spain); Gonzalez-Rouco, J.F. [Universidad Complutense de Madrid, Departamento de Astrofisica y CC. de la Atmosfera, Madrid (Spain); Navarro, J. [CIEMAT, Departamento de Energias Renovables, Madrid (Spain); Xoplaki, E. [University of Bern, Institute of Geography and Oeschger Centre for Climate Change Research, Bern (Switzerland); Montavez, J.P. [Universidad de Murcia, Departamento de Fisica, Murcia (Spain)

    2012-01-15

    The variability and predictability of the surface wind field at the regional scale is explored over a complex terrain region in the northeastern Iberian Peninsula by means of a downscaling technique based on Canonical Correlation Analysis. More than a decade of observations (1992-2005) allows for calibrating and validating a statistical method that elicits the main associations between the large scale atmospheric circulation over the North Atlantic and Mediterranean areas and the regional wind field. In an initial step the downscaling model is designed by selecting parameter values from practise. To a large extent, the variability of the wind at monthly timescales is found to be governed by the large scale circulation modulated by the particular orographic features of the area. The sensitivity of the downscaling methodology to the selection of the model parameter values is explored, in a second step, by performing a systematic sampling of the parameters space, avoiding a heuristic selection. This provides a metric for the uncertainty associated with the various possible model configurations. The uncertainties associated with the model configuration are considerably dependent on the spatial variability of the wind. While the sampling of the parameters space in the model set up moderately impact estimations during the calibration period, the regional wind variability is very sensitive to the parameters selection at longer timescales. This fact illustrates that downscaling exercises based on a single configuration of parameters should be interpreted with extreme caution. The downscaling model is used to extend the estimations several centuries to the past using long datasets of sea level pressure, thereby illustrating the large temporal variability of the regional wind field from interannual to multicentennial timescales. The analysis does not evidence long term trends throughout the twentieth century, however anomalous episodes of high/low wind speeds are identified

  17. Large-scale surface dielectric barrier discharge type reactor : effect of the electric wind on the conversion effectiveness

    Energy Technology Data Exchange (ETDEWEB)

    Jolibois, J. [Univ. de Poitiers, Poitiers (France). Centre national de la recherche scientifique, Laboratoire de Catalyse en Chimie Organique; Poitiers Univ., Futuroscope Chasseneuil Cedex (France). Centre national de la recherche scientifique, Inst. Pprime; Zouzou, N.; Moreau, E. [Poitiers Univ., Futuroscope Chasseneuil Cedex (France). Centre national de la recherche scientifique, Inst. Pprime; Tatibouet, J.M. [Univ. de Poitiers, Poitiers (France). Centre national de la recherche scientifique, Laboratoire de Catalyse en Chimie Organique

    2010-07-01

    Non-thermal plasma (NTP) techniques offer an innovative approach for air pollution reduction. Most studies in NTP techniques use volumetric discharge reactors with small dimensions and low flow rates at laboratory scale. The objective of this study was to develop an air pollution control plasma reactor at industrial scale with surface discharge. Propene (C{sub 3}H{sub 6}) was oxidized at high flow rates in a large-scale plasma reactor based on surface dielectric barrier discharge (DBD). Three different configurations of surface discharges were tested with 15 ppm of C{sub 3}H{sub 6} in air at ambient temperature for a flow rate of 50 m{sup 3} per hour. The properties of these different surface discharges were analyzed using chemical measurements and 3 component particle image velocimetry (PIV) measurements. PIV measurements were used characterize the effect of the electric wind on the polluted gas airflow inside the reactor and to explain the differences of effectiveness of the three tested plasma generators. For the three plasma generators, a propene oxidation of up to 45 percent was obtained at one J per liter. The electric wind produced by the surface discharge resulted in the formation of vortices inside the plasma reactor. This electric wind can increase gas mixing inside the plasma reactor and therefore plays a key role in conversion efficiency. It was concluded that the electric wind produced by surface discharges enables the use of this type of discharge for VOC elimination at high flow rate, with the same effectiveness of volumetric discharges. 5 refs., 10 figs.

  18. Sensitivity of Turbine-Height Wind Speeds to Parameters in Planetary Boundary-Layer and Surface-Layer Schemes in the Weather Research and Forecasting Model

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Ben; Qian, Yun; Berg, Larry K.; Ma, Po-Lun; Wharton, Sonia; Bulaevskaya, Vera; Yan, Huiping; Hou, Zhangshuan; Shaw, William J.

    2016-07-21

    We evaluate the sensitivity of simulated turbine-height winds to 26 parameters applied in a planetary boundary layer (PBL) scheme and a surface layer scheme of the Weather Research and Forecasting (WRF) model over an area of complex terrain during the Columbia Basin Wind Energy Study. An efficient sampling algorithm and a generalized linear model are used to explore the multiple-dimensional parameter space and quantify the parametric sensitivity of modeled turbine-height winds. The results indicate that most of the variability in the ensemble simulations is contributed by parameters related to the dissipation of the turbulence kinetic energy (TKE), Prandtl number, turbulence length scales, surface roughness, and the von Kármán constant. The relative contributions of individual parameters are found to be dependent on both the terrain slope and atmospheric stability. The parameter associated with the TKE dissipation rate is found to be the most important one, and a larger dissipation rate can produce larger hub-height winds. A larger Prandtl number results in weaker nighttime winds. Increasing surface roughness reduces the frequencies of both extremely weak and strong winds, implying a reduction in the variability of the wind speed. All of the above parameters can significantly affect the vertical profiles of wind speed, the altitude of the low-level jet and the magnitude of the wind shear strength. The wind direction is found to be modulated by the same subset of influential parameters. Remainder of abstract is in attachment.

  19. The effect of foam on waves and the aerodynamic roughness of the water surface at high winds

    Science.gov (United States)

    Troitskaya, Yuliya; Vdovin, Maxim; Sergeev, Daniil; Kandaurov, Alexander

    2017-04-01

    Air-sea coupling at extreme winds is of special interest now in connection with the problem of explanation of the sea surface drag saturation at the wind speed exceeding 30 m/s. The idea on saturation (and even reduction) of the coefficient of aerodynamic resistance of the sea surface at hurricane wind speed first suggested in [1] on the basis of theoretical analysis of sensitivity of maximum wind speed in a hurricane to the ratio of the enthalpy and momentum exchange coefficients was then confirmed by a number of field (e.g.[2]) and laboratory [3] experiments, which showed that the sea surface drag coefficient was significantly reduced in comparison with the parameterization obtained at moderate to strong wind conditions. The theoretical explanations of the effect of the sea surface drag reduction exploit either peculiarities of the air flow over breaking waves (e.g.[4,5]) or the effect of sea drops and spray on the wind-wave momentum exchange (e.g. [6,7]). Recently an alternative hypothesis was suggested in [8], where the surface drag reduction in hurricanes was explained by the influence of foam covering sea surface on its aerodynamic roughness. This paper describes a series of laboratory experiments in Thermostratified Wind-Wave Tank (TSWiWaT) of IAP directed to investigation of the foam impact on the short-wave part of the surface waves and the momentum exchange in the atmospheric boundary layer at high winds in the range of equivalent 10-m wind speed from 12 to 38 m/s. A special foam generator was designed for these experiments. The air flow parameters were retrieved from measurements of the velocity profiles. The frequency-wavenumber spectra of surface waves were retrieved from the measurements of water surface elevation by the array 3-channel wave gauge. Foam coverage of water surface was controlled by video filming of the water surface. The results of measurements were compared with predictions of the quasi-linear model of atmospheric boundary layer over

  20. WISE 2000 campaign: sea surface salinity and wind retrievals from L-band radiometry

    Science.gov (United States)

    Camps, Adriano; Corbella, Ignasi; Font, Jordi; Etchetto, Jacqueline; Duffo, Nuria; Vall-llossera, Merce; Bara, Javier; Torres, Francisco; Wursteisen, Patrick; Martin-Neira, Manuel

    2000-12-01

    Sea surface salinity (SSS) has been recognized as a key parameter in climatological studies. SSS can be measured by passive microwave remote sensing at L band, where the sensitivity of the brightness temperatures shows a maximum and the atmosphere is almost transparent. To provide global coverage of this basic parameter with a 3-day revisit time, the SMOS mission was recently selected by ESA within the frame of the Earth Explorer Opportunity Missions. The SMOS mission will carry the MIRAS instrument, the first 2D L-band aperture synthesis interferometric radiometer. To address new challenges that this mission presents, such as incidence angle variation with pixel, polarization mixing, effect of wind and foam and others, a measurement campaign has been sponsored by ESA under the name of WISE 2000 and it is scheduled for October-November 2000. Two L-band radiometers, a video, a IR and a stereo-camera and four oceanographic and meteorological buoys will be installed in the oil platform 'Casablanca' located at 40 Km off the coast of Tarragona, where the sea conditions are representative of the Mediterranean open sea with periodic influence of the Ebro river fresh water plume.

  1. The impact of Surface Wind Velocity Data Assimilation on the Predictability of Plume Advection in the Lower Troposphere

    Science.gov (United States)

    Sekiyama, Thomas; Kajino, Mizuo; Kunii, Masaru

    2017-04-01

    The authors investigated the impact of surface wind velocity data assimilation on the predictability of plume advection in the lower troposphere exploiting the radioactive cesium emitted by the Fukushima nuclear accident in March 2011 as an atmospheric tracer. It was because the radioactive cesium plume was dispersed from the sole point source exactly placed at the Fukushima Daiichi Nuclear Power Plant and its surface concentration was measured at many locations with a high frequency and high accuracy. We used a non-hydrostatic regional weather prediction model with a horizontal resolution of 3 km, which was coupled with an ensemble Kalman filter data assimilation system in this study, to simulate the wind velocity and plume advection. The main module of this weather prediction model has been developed and used operationally by the Japan Meteorological Agency (JMA) since before March 2011. The weather observation data assimilated into the model simulation were provided from two data resources; [#1] the JMA observation archives collected for numerical weather predictions (NWPs) and [#2] the land-surface wind velocity data archived by the JMA surface weather observation network. The former dataset [#1] does not contain land-surface wind velocity observations because their spatial representativeness is relatively small and therefore the land-surface wind velocity data assimilation normally deteriorates the more than one day NWP performance. The latter dataset [#2] is usually used for real-time weather monitoring and never used for the data assimilation of more than one day NWPs. We conducted two experiments (STD and TEST) to reproduce the radioactive cesium plume behavior for 48 hours from 12UTC 14 March to 12UTC 16 March 2011 over the land area of western Japan. The STD experiment was performed to replicate the operational NWP using only the #1 dataset, not assimilating land-surface wind observations. In contrast, the TEST experiment was performed assimilating both

  2. Mountain Waves in High Resolution Forecast Models: Automated Diagnostics of Wave Severity and Impact on Surface Winds

    Directory of Open Access Journals (Sweden)

    Peter Sheridan

    2017-01-01

    Full Text Available An automated method producing a diagnostic of the severity of lee waves and their impacts on surface winds as represented in output from a high resolution linear numerical model (3D velocities over mountains (3DVOM covering several areas of the U.K. is discussed. Lee waves involving turbulent rotor activity or downslope windstorms represent a hazard to aviation and ground transport, and summary information of this kind is highly valuable as an efficient ‘heads-up’ for forecasters, for automated products or to feed into impact models. Automated diagnosis of lee wave surface effects presents a particular challenge due to the complexity of turbulent zones in the lee of irregular terrain. The method proposed quantifies modelled wind perturbations relative to those that would occur in the absence of lee waves for a given background wind, and diagnoses using it are found to be quite consistent between cases and for different ranges of U.K. hills. A recent upgrade of the operational U.K. limited area model, the U.K. Variable Resolution Model (UKV used for general forecasting at the Met Office means that it now resolves lee waves, and its performance is here demonstrated using comparisons with aircraft- and surface-based observations and the linear model. In the future, automated diagnostics may be adapted to use its output to routinely produce contiguous mesoscale maps of lee wave activity and surface impacts over the whole U.K.

  3. Effects of sea surface winds on marine aerosols characteristics and impacts on longwave radiative forcing over the Arabian Sea

    Directory of Open Access Journals (Sweden)

    Vijayakumar S. Nair

    2008-08-01

    Full Text Available Collocated measurements of spectral aerosol optical depths (AODs, total and BC mass concentrations, and number size distributions of near surface aerosols, along with sea surface winds, made onboard a scientific cruise over southeastern Arabian Sea, are used to delineate the effects of changes in the wind speed on aerosol properties and its implication on the shortwave and longwave radiative forcing. The results indicated that an increase in the sea-surface wind speed from calm to moderate (<1 to 8 m s−1 values results in a selective increase of the particle concentrations in the size range 0.5 to 5 μm, leading to significant changes in the size distribution, increase in the mass concentration, decrease in the BC mass fraction, a remarkable increase in AODs in the near infrared and a flattening of the AOD spectrum. The consequent increase in the longwave direct radiative forcing almost entirely offsets the corresponding increase in the short wave direct radiative forcing (or even overcompensates at the top of the atmosphere; while the surface forcing is offset by about 50%.

  4. Impact of high-resolution sea surface temperature, emission spikes and wind on simulated surface ozone in Houston, Texas during a high ozone episode

    Science.gov (United States)

    Pan, Shuai; Choi, Yunsoo; Jeon, Wonbae; Roy, Anirban; Westenbarger, David A.; Kim, Hyun Cheol

    2017-03-01

    Model-measurement comparisons for surface ozone often show significant error, which could be attributed to problems in meteorology and emissions fields. A WRF-SMOKE-CMAQ air quality modeling system was used to investigate the contributions of these inputs. In this space, a base WRF run (BASE) and a WRF run initializing with NOAA GOES satellite sea surface temperature (SST) (SENS) were performed to clarify the impact of high-resolution SST on simulated surface ozone (O3) over the Greater Houston area during 25 September 2013, corresponding to the high O3 episode during the NASA DISCOVER-AQ Texas campaign. The SENS case showed reduced land-sea thermal contrast during early morning hours due to 1-2 °C lower SST over water bodies. The lowered SST reduced the model wind speed and slowed the dilution rate. These changes led to a simulated downwind O3 change of ∼5 ppb near the area over land with peak simulated afternoon O3. However, the SENS case still under-predicted surface O3 in urban and industrial areas. Episodic flare emissions, dry sunny postfrontal stagnated conditions, and land-bay/sea breeze transitions could be the potential causes of the high O3. In order to investigate the additional sources of error, three sensitivity simulations were performed for the high ozone time period. These involved adjusted emissions, adjusted wind fields, and both adjusted emissions and winds. These scenarios were superimposed on the updated SST (SENS) case. Adjusting NOx and VOC emissions using simulated/observed ratios improved correlation and index of agreement (IOA) for NOx from 0.48 and 0.55 to 0.81 and 0.88 respectively, but still reported spatial misalignment of afternoon O3 hotspots. Adjusting wind fields to represent morning weak westerly winds and afternoon converging zone significantly mitigated under-estimation of the observed O3 peak. For example, simulations with adjusted wind fields and adjusted (emissions + wind fields) reduced under-estimation of the peak

  5. The emission and scattering of L-band microwave radiation from rough ocean surfaces and wind speed measurements from the Aquarius sensor

    Science.gov (United States)

    Meissner, Thomas; Wentz, Frank J.; Ricciardulli, Lucrezia

    2014-09-01

    In order to achieve the required accuracy in sea surface salinity (SSS) measurements from L-band radiometers such as the Aquarius/SAC-D or SMOS (Soil Moisture and Ocean Salinity) mission, it is crucial to accurately correct the radiation that is emitted from the ocean surface for roughness effects. We derive a geophysical model function (GMF) for the emission and backscatter of L-band microwave radiation from rough ocean surfaces. The analysis is based on radiometer brightness temperature and scatterometer backscatter observations both taken on board Aquarius. The data are temporally and spatially collocated with wind speeds from WindSat and F17 SSMIS (Special Sensor Microwave Imager Sounder) and wind directions from NCEP (National Center for Environmental Prediction) GDAS (Global Data Assimilation System). This GMF is the basis for retrieval of ocean surface wind speed combining L-band H-pol radiometer and HH-pol scatterometer observations. The accuracy of theses combined passive/active L-band wind speeds matches those of many other satellite microwave sensors. The L-band GMF together with the combined passive/active L-band wind speeds is utilized in the Aquarius SSS retrieval algorithm for the surface roughness correction. We demonstrate that using these L-band wind speeds instead of NCEP wind speeds leads to a significant improvement in the SSS accuracy. Further improvements in the roughness correction algorithm can be obtained by adding VV-pol scatterometer measurements and wave height (WH) data into the GMF.

  6. Experimental investigation of effect of surface gravity waves and spray on heat and momentum flux at strong wind conditions

    Science.gov (United States)

    Troitskaya, Yuliya; Sergeev, Daniil; Vdovin, Maxim; Kandaurov, Alexander; Ermakova, Olga; Kazakov, Vassily

    2015-04-01

    The most important characteristics that determine the interaction between atmosphere and ocean are fluxes of momentum, heat and moisture. For their parameterization the dimensionless exchange coefficients (the surface drag coefficient CD and the heat transfer coefficient or the Stanton number CT) are used. Numerous field and laboratory experiments show that CD increases with increasing wind speed at moderate and strong wind, and as it was shows recently CD decreases at hurricane wind speed. Waves are known to increase the sea surface resistance due to enhanced form drag, the sea spray is considered as a possible mechanism of the 'drag reduction' at hurricane conditions. The dependence of heat transfer coefficient CD on the wind speed is not so certain and the role of the mechanism associated with the wave disturbances in the mass transfer is not completely understood. Observations and laboratory data show that this dependence is weaker than for the CD, and there are differences in the character of the dependence in different data sets. The purpose of this paper is investigation of the effect of surface waves on the turbulent exchange of momentum and heat within the laboratory experiment, when wind and wave parameters are maintained and controlled. The effect of spray on turbulent exchange at strong winds is also estimated. A series of experiments to study the processes of turbulent exchange of momentum and heat in a stably stratified temperature turbulent boundary layer air flow over waved water surface were carried out at the Wind - wave stratified flume of IAP RAS, the peculiarity of this experiment was the option to change the surface wave parameters regardless of the speed of the wind flow in the channel. For this purpose a polyethylene net with the variable depth (0.25 mm thick and a cell of 1.6 mm × 1.6mm) has been stretched along the channel. The waves were absent when the net was located at the level of the undisturbed water surface, and had maximum

  7. Features of Ocean Surface Winds Observed by the QuikSCAT Satellite Before Tropical Cyclogenesis over the South China Sea

    Institute of Scientific and Technical Information of China (English)

    WANG Lei; LAU Kai-Hon; FUNG Chi-Hung; ZHANG Qinghong

    2008-01-01

    Ocean surface winds observed by the Quick Scatterometer (QuikSCAT) satellite prior to the geneses of 36 tropical cy- clones (TCs) in the South China Sea (SCS) are investigated in this paper. The results show that there are areas with negative mean horizontal divergence around the TC genesis locations three days prior to TC formation. The divergence term [-(f+ζ)( u/ x+ v/ y)] in the vorticity equation is calculated based upon the QuikSCAT ocean surface wind data. The calculated mean divergence term is about 10.3 times the mean relative vorticity increase rate around the TC genesis position one day prior to TC genesis, which shows the important contributions of the divergence term to the vorticity increase prior to TC formation. It is suggested that criteria related with the divergence and divergence term be applied in early detections of tropical cyclogenesis using the QuikSCAT satellite data.

  8. Experimental investigation of the surface pressure field for prediction of trailing edge noise of wind turbine aerofoils

    DEFF Research Database (Denmark)

    Fischer, Andreas; Aagaard Madsen, Helge; Bertagnolio, Franck

    2015-01-01

    This paper concerns the characterisation of turbulent boundary layer trailing edge noise by measuring the surface pressure field. Two aerofoils typically used at the outer blade section of modern MW wind turbines were tested in an anechoic wind tunnel for Reynolds numbers ranging from 1 million...... used as input to the model. There was a factor of 2 as difference between the two models. The prediction of the far field trailing edge noise with one model was in excellent agreement with the microphone array measurements in a frequency range of 500-2000 Hz. This opens up the possibility...... to 1.9 million and angles of attack ranging from −10° to 14°. The emitted trailing noise from the aerofoils was measured with a microphone array at a distance of 1.6 m away from the aerofoil. The two-dimensional surface pressure field, which is considered the source of the emitted trailing edge noise...

  9. Quality Control and First Insights on the Variability of Surface Wind Observations for North Eastern North America

    Science.gov (United States)

    Lucio-Eceiza, E.; González-Rouco, F. J.; Navarro Montesinos, J.; Hidalgo; Jiménez, P.; García-Bustamante, E.; Conte, J.; Casabella, N.; Beltrami, H.

    2013-12-01

    Over the last decades, a policy change in energy sources has been fostered in Atlantic Canada. The purpose of this has been to reduce the dependency on energy produced abroad and to propose feasible alternatives with the aim of reducing greenhouse emissions. The region offers a high potential for the development of wind energy facilities and studies within the framework of wind resource assessment are encouraged. Studies of this nature rely on the quality of observational data. Henceforth, it is essential to develop procedures that ensure the reliability of observations before they are subjected to any subsequent analysis. This work summarizes the Quality Control process applied to an observational database of surface wind module and direction in North Eastern North America. The data set consists of 525 stations compiled from three different sources: 344 land sites from Environment Canada (EC; 1940-2009) located in the provinces of Atlantic Canada and Quebec; 40 buoys distributed over the East Coast and the Canadian Great Lakes provided by Fisheries and Oceans Canada (FOC; 1988-2008); and 141 land sites over both Eastern Canada and North Eastern USA provided by the National Center of Atmospheric Research (NCAR; 1975-2010). The process comprises different phases that: 1) unify measurement units and recording times; 2) find accidentally duplicated periods of data within a time series or between different stations; 3) check for physical consistency in the ranges of values; 4) detect time intervals of anomalous low and high variability; and 5) look for long term biases in mean and variance. The temporal extension and resolution of the quality controlled database allows to explore the wind variability at different temporal scales, from daily to multidecadal. This contribution will present a first assessment of the wind field climatology in the region, including a description of long term trends, analogous of wind circulation regimes and their relationship to large scale

  10. Observations of C-Band Brightness Temperature and Ocean Surface Wind Speed and Rain Rate in Hurricanes Earl And Karl (2010)

    Science.gov (United States)

    Miller, Timothy; James, Mark; Roberts, Brent J.; Biswax, Sayak; Uhlhorn, Eric; Black, Peter; Linwood Jones, W.; Johnson, Jimmy; Farrar, Spencer; Sahawneh, Saleem

    2012-01-01

    Ocean surface emission is affected by: a) Sea surface temperature. b) Wind speed (foam fraction). c) Salinity After production of calibrated Tb fields, geophysical fields wind speed and rain rate (or column) are retrieved. HIRAD utilizes NASA Instrument Incubator Technology: a) Provides unique observations of sea surface wind, temp and rain b) Advances understanding & prediction of hurricane intensity c) Expands Stepped Frequency Microwave Radiometer capabilities d) Uses synthetic thinned array and RFI mitigation technology of Lightweight Rain Radiometer (NASA Instrument Incubator) Passive Microwave C-Band Radiometer with Freq: 4, 5, 6 & 6.6 GHz: a) Version 1: H-pol for ocean wind speed, b) Version 2: dual ]pol for ocean wind vectors. Performance Characteristics: a) Earth Incidence angle: 0deg - 60deg, b) Spatial Resolution: 2-5 km, c) Swath: approx.70 km for 20 km altitude. Observational Goals: WS 10 - >85 m/s RR 5 - > 100 mm/hr.

  11. Simultaneous measurements of air-sea gas transfer velocity and near surface turbulence at low to moderate winds (Invited)

    Science.gov (United States)

    Wang, B.; Liao, Q.; Fillingham, J. H.; Bootsma, H. A.

    2013-12-01

    Parameterization of air-sea gas transfer velocity was routinely made with wind speed. Near surface turbulent dissipation rate has been shown to have better correlation with the gas transfer velocity in a variety of aquatic environments (i.e., the small eddy model) while wind speed is low to moderate. Wind speed model may underestimate gas transfer velocity at low to moderate winds when the near surface turbulence is produced by other environmental forcing. We performed a series of field experiments to measure the CO2 transfer velocity, and the statistics of turbulence immediately below the air-water interface using a novel floating PIV and chamber system. The small eddy model was evaluated and the model coefficient was found to be a non-constant, and it varies with the local turbulent level (figure 1). Measure results also suggested an appropriate scaling of the vertical dissipation profile immediately below the interface under non-breaking conditions, which can be parameterized by the wind shear, wave height and wave age (figure 2). Figure 1. Relation between the coefficient of the small eddy model and dissipation rate. The data also include Chu & Jirka (2003) and Vachon et al. (2010). The solid regression line: α = 0.188log(ɛ)+1.158 Figure 2. Non-dimensional dissipation profiles. Symbols: measured data with the floating PIV. Solid line: regression of measured data with a -0.79 decaying rate. Dash line with -2 slope: Terray et al. (1996) relation. Dash line with two layer structure: Siddiqui & Loewen (2007) relation.

  12. A Novel Surface Thermometry Approach for use in Aerothermodynamic Wind Tunnel Testing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR project is aimed at developing a novel thermometry technology with upconverting phosphors for temperature measurement in NASA's high-enthalpy wind tunnels....

  13. Impact of model resolution on simulated wind, drifting snow and surface mass balance in Terre Adélie, East Antarctica

    NARCIS (Netherlands)

    Lenaerts, J.T.M.; van den Broeke, M.R.; Scarchilli, C.; Agosta, C.

    2012-01-01

    This paper presents the impact of model resolution on the simulated wind speed, drifting snow climate and surface mass balance (SMB) of Terre Ad´elie and its surroundings, East Antarctica. We compare regional climate model simulations at 27 and 5.5 km resolution for the year 2009. The wind speed max

  14. Estimating maximum global land surface wind power extractability and associated climatic consequences

    Directory of Open Access Journals (Sweden)

    L. M. Miller

    2010-09-01

    Full Text Available The availability of wind power for renewable energy extraction is ultimately limited by how much kinetic energy is generated by natural processes within the Earth system and by fundamental limits of how much of the wind power can be extracted. Here we use these considerations to provide a maximum estimate of wind power availability over land. We use three different methods. First, we use simple, established estimates of the energetics of the atmospheric circulation, which yield about 38 TW of wind power available for extraction. Second, we set up a simple momentum balance model to estimate maximum extractability which we then apply to reanalysis climate data, yielding an estimate of 17 TW. Finally, we perform climate model simulations in which we extract different amounts of momentum from the atmospheric boundary layer to obtain a maximum estimate of how much power can be extracted, yielding 36 TW. These three methods consistently yield maximum estimates in the range of 17–38 TW and are notably less than recent estimates that claim abundant wind power availability. Furthermore, we show with the climate model simulations that the climatic effects at maximum wind power extraction are similar in magnitude to those associated with a doubling of atmospheric CO2. We conclude that in order to understand fundamental limits to renewable energy resources, as well as the impacts of their utilization, it is imperative to use a thermodynamic, Earth system perspective, rather than engineering specifications of the latest technology.

  15. Calibration of GNSS-R surface wind retrievals using the ERA analysis

    Science.gov (United States)

    Danielson, Rick; Johannessen, Johnny; Cardellach, Estel; Fabra, Fran; Catarino, Nuno

    2017-04-01

    The Space GNSS Receiver Remote Sensing Instrument (SGR-ReSI) of the TechDemoSat-1 (TDS-1) satellite collected and processed about half a million fast delivery wind speed retrievals. Exploring ways to validate these data provides an opportunity, not just to quantify, but also potentially to reduce wind speed retrieval errors (in an ordinary least squares sense) and thereby improve the correspondence between the data to be calibrated and an unknown target wind analysis. The ERA Interim analysis is employed as a calibrated reference for the TDS-1 wind speed retrievals. Simultaneous assessment of error in these two collocated data leads to a global (i.e., for all collocations) and local (i.e., as a function of wind speed) determinations of statistical properties characterizing bias (both additive and multiplicative), RMS error, and correlation with an unknown target analysis. The approach taken is widely referred to as the triple collocation method (Stoffelen 1998, McColl et al. 2014), where a simplifying assumption is that three wind estimates can be obtained from these two datasets (TDS-1 and ERA).

  16. Near-surface wind speed statistical distribution: comparison between ECMWF System 4 and ERA-Interim

    Science.gov (United States)

    Marcos, Raül; Gonzalez-Reviriego, Nube; Torralba, Verónica; Cortesi, Nicola; Young, Doo; Doblas-Reyes, Francisco J.

    2017-04-01

    In the framework of seasonal forecast verification, knowing whether the characteristics of the climatological wind speed distribution, simulated by the forecasting systems, are similar to the observed ones is essential to guide the subsequent process of bias adjustment. To bring some light about this topic, this work assesses the properties of the statistical distributions of 10m wind speed from both ERA-Interim reanalysis and seasonal forecasts of ECMWF system 4. The 10m wind speed distribution has been characterized in terms of the four main moments of the probability distribution (mean, standard deviation, skewness and kurtosis) together with the coefficient of variation and goodness of fit Shapiro-Wilks test, allowing the identification of regions with higher wind variability and non-Gaussian behaviour at monthly time-scales. Also, the comparison of the predicted and observed 10m wind speed distributions has been measured considering both inter-annual and intra-seasonal variability. Such a comparison is important in both climate research and climate services communities because it provides useful climate information for decision-making processes and wind industry applications.

  17. Potential fate of SOC eroded from natural crusted soil surface under simulated wind driven storm

    Science.gov (United States)

    Xiao, Liangang; Fister, Wolfgang; Greenwood, Philip; Hu, Yaxian; Kuhn, Nikolaus J.

    2016-04-01

    Improving the assessment of the impact of soil erosion on carbon (C) cycling requires a better understanding of the redistribution of eroded sediment and associated soil organic carbon (SOC) across agricultural landscapes. Recent studies conducted on dry-sieved aggregates in the laboratory demonstrated that aggregation can profoundly skew SOC redistribution and its subsequent fate by accelerating settling velocities of aggregated sediment compared to mineral grains, which in turn can increase SOC mineralization into greenhouse gases. However, the erodibility of the soil in the field is more variable than in the laboratory due to tillage, crus formation, drying-wetting and freeze-thaw cycles, and biological effects. This study aimed to investigate the potential fate of the SOC eroded from naturally developed soil surface and to compare the observations with those made in the laboratory. Simulated, short, high intensity wind driven storms were conducted on a crusted loam in the field. The sediments were fractionated with a settling tube according to their potential transport distances. The soil mass, SOC concentration and cumulative 80-day CO2 emission of each fraction were identified. The results show: 1) 53% of eroded sediment and 62% of eroded SOC from the natural surface in the field would be deposited across landscapes, which is six times and three times higher compared to that implied by mineral grains, respectively; 2) the preferential deposition of SOC-rich fast-settling sediment potentially releases approximately 50% more CO2 than the same layer of the non-eroded soil; 3) the respiration of the slow-settling fraction that is potentially transported to the aquatic systems was much more active compared to the other fractions and the bulk soil. Our results confirm in general the conclusions drawn from laboratory and thus demonstrate that aggregation can affect the redistribution of sediment associated SOC under field conditions, including an increase in

  18. Metal-packaged fibre Bragg grating strain sensors for surface-mounting onto spalled concrete wind turbine foundations

    Science.gov (United States)

    Perry, M.; Fusiek, G.; McKeeman, I.; Niewczas, P.; Saafi, M.

    2015-09-01

    In this work, we demonstrate preliminary results for a hermetically sealed, metal-packaged fibre Bragg grating strain sensor for monitoring existing concrete wind turbine foundations. As the sensor is bolted to the sub-surface of the concrete, it is suitable for mounting onto uneven, wet and degraded surfaces, which may be found in buried foundations. The sensor was able to provide reliable measurements of concrete beam strain during cyclic three- and four- point bend tests. The strain sensitivity of the prototype sensor is currently 10 % of that of commercial, epoxied fibre strain sensors.

  19. Impact of climate change on surface wind regime over the Peru-Chile upwelling region

    Science.gov (United States)

    Goubanova, K.; Echevin, V.; Dewitte, B.; Garreaud, R.; Terray, P.; Vrac, M.

    2009-04-01

    The ocean region off the Chile-Peru coast is characterized by upwelling of cold, nutrient-rich waters, which drives an exceptionally high biological productivity. This upwelling is induced by the persistent southerly winds along the coast that exhibit a coastal jet structure at intraseasonal scales. Recent climate change studies based on the coupled atmosphere-ocean general circulation models (AOGCM) show a strengthening of the large-scale southerlies along the subtropical coast that could lead to an increase in coastal upwelling. However the coastal jet events which represent a considerable source of the synoptic variability of the alongshore winds are characterized by horizontal scale comparable to a AOGCM grid cell size, and cannot be therefore explicitly resolved by the AOGCMs. In order to provide a regional estimate of the winds as predicted by the coarse-resolution AOGCMs, a statistical downscaling method based on multiple linear regression is proposed. Large-scale wind at 10 m and sea level pressure are chosen as the predictor variables for regional 10 m wind. The validation is performed in two steps. First, QuikSCAT and ERS satellite products and NCEP reanalysis for the period 1992-2006 are used to build and validate the statistical model for the present climate. Second, the model is validated under a warmer climate: it is applied to large-scale predictors extracted from HadCM3 AOGCM simulations for the A2 and B2 SRES scenarios (2071-2100); the downscaled wind is then compared with outputs of the PRECIS regional climate model, forced at its boundaries by the same HadCM3 scenarios. To assess climate change impact on the along-shore wind, the statistical downscaling is applied to two contrasted SRES scenarios, namely the so-called preindustrial and CO2 quadrupling. The outputs of the IPSL-CM4 AOGCM are used as predictors. Evolution of the along-shore wind regime with a focus on the change of the coastal jet characteristics is discussed. For this particular

  20. Coherent motions and time scales that control heat and mass transfer at wind-swept water surfaces

    Science.gov (United States)

    Turney, D. E.

    2016-12-01

    Forecast of the heat and chemical budgets of lakes, rivers, and oceans requires improved predictive understanding of air-water interfacial transfer coefficients. Here we present laboratory observations of the coherent motions that occupy the air-water interface at wind speeds (U10) 1.1-8.9 m/s. Spatiotemporal near-surface velocity data and interfacial renewal data are made available by a novel flow tracer method. The relative activity, velocity scales, and time scales of the various coherent interfacial motions are measured, namely for Langmuir circulations, streamwise streaks, nonbreaking wind waves, parasitic capillary waves, nonturbulent breaking wind waves, and turbulence-generating breaking wind waves. Breaking waves exhibit a sudden jump in streamwise interfacial velocity wherein the velocity jumps up to exceed the wave celerity and destroys nearby parasitic capillary waves. Four distinct hydrodynamic regimes are found to exist between U10 = 0 and 8.9 m/s, each with a unique population balance of the various coherent motions. The velocity scales, time scales, and population balance of the different coherent motions are input to a first-principles gas transfer model to explain the waterside transfer coefficient (kw) as well as experimental patterns of temperature and gas concentration. The model mixes concepts from surface renewal and divergence theories and requires surface divergence strength (β), the Lagrangian residence time inside the upwelling zone (tLu), and the total lifetime of new interface before it is downwelled (tLT). The model's output agrees with time-averaged measurements kw, patterns of temperature in infrared photographs, and spatial patterns of gas concentration and kw from direct numerical simulations. Several nondimensional parameters, e.g. βtLu and τstLT where τs is the interfacial shear rate, determine the effectiveness of a particular type of coherent motion for affecting kw.

  1. Droplet evaporation from porous surfaces; model validation from field and wind tunnel experiments for sand and concrete

    Science.gov (United States)

    Griffiths, R. F.; Roberts, I. D.

    The evaporation model of Roberts and Griffiths (1995 Atmospheric Environment 29, 1307-1317) has been subjected to an extensive validation exercise based on a major campaign of field experiments on evaporation from surfaces composed of sand and of concrete. This complements the previous validation which was limited to wind tunnel experiments on sand surfaces. Additionally, the validation using wind tunnel data has been extended to include concrete surfaces. The model describes the constant-rate and falling-rate periods that characterise evaporation from porous media. During the constant-rate period, the evaporation is solely determined by the vapour transport rate into the air. During the falling-rate period, the process in the porous medium is modelled as a receding evaporation front, the overall evaporation rate being determined by the combined effects of vapour transport through the pore network and subsequently into the air. The field trials programme was conducted at sites in the USA and the UK, and examined the evaporation of diethyl malonate droplets from sand and concrete surfaces. Vapour concentrations at several heights in the plume were measured at the centre of a 1 m radius annular source (of width 10 cm) contaminated by uniformly sized droplets (2.4 or 4.1 mm in diameter), key meteorological data being measured at the same time. The evaporation was quantified by coupling concentration and wind speed data. In all, 22 trials were performed on sand and concrete; a further 8 were performed on non-porous surfaces (aluminium foil and slate) as references. The model performance was evaluated against the experimental data in terms of two quantities, the initial evaporation rate of the embedded droplets, and the mass-fraction remaining in the substrate at intervals over the evaporation episode. Overall, the model performance was best in the case of the field experiments for concrete, and the wind tunnel experiments for sand; the performance for wind tunnel

  2. The effects of sorting by aeolian processes on the geochemical characteristics of surface materials: a wind tunnel experiment

    Science.gov (United States)

    Wang, Xunming; Lang, Lili; Hua, Ting; Zhang, Caixia; Li, Hui

    2017-03-01

    The geochemical characteristics of aeolian and surface materials in potential source areas of dust are frequently employed in environmental reconstructions as proxies of past climate and as source tracers of aeolian sediments deposited in downwind areas. However, variations in the geochemical characteristics of these aeolian deposits that result from near-surface winds are currently poorly understood. In this study, we collected surface samples from the Ala Shan Plateau (a major potential dust source area in Central Asia) to determine the influence of aeolian processes on the geochemical characteristics of aeolian transported materials. Correlation analyses show that compared with surface materials, the elements in transported materials (e.g., Cu, As, Pb, Mn, Zn, Al, Ca, Fe, Ga, K, Mg, P, Rb, Co, Cr, Na, Nb, Si, and Zr) were subjected to significant sorting by aeolian processes, and the sorting also varied among different particle size fractions and elements. Variations in wind velocity were significantly correlated with the contents of Cr, Ga, Sr, Ca, Y, Nd, Zr, Nb, Ba, and Al, and with the Zr/Al, Zr/Rb, K/Ca, Sr/Ca, Rb/Sr, and Ca/Al ratios. Given the great variation in the geochemical characteristics of materials transported under different aeolian processes relative to those of the source materials, these results indicate that considerable uncertainty may be introduced to analyses by using surface materials to trace the potential source areas of aeolian deposits that accumulate in downwind areas.

  3. Application of Surface Protective Coating to Enhance Environment-Withstanding Property of the MEMS 2D Wind Direction and Wind Speed Sensor

    National Research Council Canada - National Science Library

    Kyu-Sik Shin; Dae-Sung Lee; Sang-Woo Song; Jae Pil Jung

    2017-01-01

    In this study, a microelectromechanical system (MEMS) two-dimensional (2D) wind direction and wind speed sensor consisting of a square heating source and four thermopiles was manufactured using the heat detection method...

  4. Estimating maximum global land surface wind power extractability and associated climatic consequences

    Directory of Open Access Journals (Sweden)

    L. M. Miller

    2011-02-01

    Full Text Available The availability of wind power for renewable energy extraction is ultimately limited by how much kinetic energy is generated by natural processes within the Earth system and by fundamental limits of how much of the wind power can be extracted. Here we use these considerations to provide a maximum estimate of wind power availability over land. We use several different methods. First, we outline the processes associated with wind power generation and extraction with a simple power transfer hierarchy based on the assumption that available wind power will not geographically vary with increased extraction for an estimate of 68 TW. Second, we set up a simple momentum balance model to estimate maximum extractability which we then apply to reanalysis climate data, yielding an estimate of 21 TW. Third, we perform general circulation model simulations in which we extract different amounts of momentum from the atmospheric boundary layer to obtain a maximum estimate of how much power can be extracted, yielding 18–34 TW. These three methods consistently yield maximum estimates in the range of 18–68 TW and are notably less than recent estimates that claim abundant wind power availability. Furthermore, we show with the general circulation model simulations that some climatic effects at maximum wind power extraction are similar in magnitude to those associated with a doubling of atmospheric CO2. We conclude that in order to understand fundamental limits to renewable energy resources, as well as the impacts of their utilization, it is imperative to use a "top-down" thermodynamic Earth system perspective, rather than the more common "bottom-up" engineering approach.

  5. Effect of Surface waves On air-sea momentum flux in high wind conditions for typhoons in the South China Sea

    Institute of Scientific and Technical Information of China (English)

    Liangming Zhou; Aifang Wang; Peifang Guo; Zhifeng Wang

    2008-01-01

    The WAVEWATCH-Ⅲ wave model is implemented in the South China Sea to investigate the air-sea momentum flux in high wind conditions during 23 passages of typhoon occurred in 2005.The wave model is driven by the reanalyzed surface winds assimilated by sevcral meteorologic data sources.The friction velocity was calculated and the relationships between different air-sea momentum param. eters were studied.The results show that the drag coefficient decreases with the wave age generally and levels off for wind speeds higher than 35 m/s under typhoon wind forcing.The spatial variations of air-sea momentum flux parameters in high wind conditions forced by typhoons are completely different from those at weak wind speeds and significantly depend on the relative position from the typhoon center.

  6. Vessel-mounted acoustic-doppler current profiler (ADCP) and surface-wind data from the National Park of American Samoa, Tutuila, American Samoa, 2015

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Spatial surveys of water column currents and surface winds were conducted from February 17 to 20, 2015, off the north coast of the island of Tutuila, American Samoa....

  7. GHRSST Level 2P Gridded Global Subskin Sea Surface Temperature from WindSat polarimetric radiometer on the Coriolis satellite (GDS version 1)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains sea surface temperature derived from observations made by the WindSat Polarimetric Radiometer developed by the Naval Research Laboratory (NRL)...

  8. NODC Standard Product: World Ocean Circulation Program (WOCE) Global Data, Version 2: Satellite sea surface winds data on CD-ROM (NODC Accession 0000318)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Surface wind and other data were collected using microwave scatterometers satellite in a world-wide distribution from May 5, 1991 to May 31, 2000. Data were...

  9. Wind or water turbine power augmentation using the system of guiding surfaces

    Science.gov (United States)

    Bashurin, V. P.; Budnikov, I. N.; Hatunkin, V. Yu; Klevtsov, V. A.; Ktitorov, L. V.; Lazareva, A. S.; Meshkov, E. E.; Novikova, I. A.; Pletenev, F. A.; Yanbaev, G. M.

    2016-04-01

    As fluid flows through a conventional wind or hydro turbine, it slows from losing energy to extraction from a turbine and spreads out to a wider area. This results in a loss of turbine efficiency. In order to exploit wind or water flow power more effectively, it was suggested to place the turbine inside a system of specially designed airfoils (‘a flow booster’). One part of the booster (‘a nozzle’) improves the turbine performance by speeding up the flow acting on the turbine blades. The other part of the accelerating system (‘a diffuser’) creates a field of low pressure behind the turbine which helps to draw more mass flow to the turbine and avoid the loss of efficiency due to flow deceleration. The flow booster accumulates the kinetic energy of the flow (e.g. river flow or wind) in a small volume where the smaller turbine can be installed. Another possible application of the booster could be the improvement of wind turbine efficiency during low wind period. The present paper also discusses the possibility of kinetic energy accumulation by the use of several accelerating systems of different sizes—the smaller one can be installed inside the bigger one. It helps to accumulate even more kinetic energy on the turbine blades. We call this method the kinetic energy cumulation. Lab and field experiments and CFD simulations of shrouded turbine demonstrate significant increase in velocity in comparison of those for conventional (bare) turbines.

  10. The role of free stream turbulence and blade surface conditions on the aerodynamic performance of wind turbine blades

    Science.gov (United States)

    Maldonado, Victor Hugo

    Wind turbines operate within the atmospheric boundary layer (ABL) which gives rise to turbulence among other flow phenomena. There are several factors that contribute to turbulent flow: The operation of wind turbines in two layers of the atmosphere, the surface layer and the mixed layer. These layers often have unstable wind conditions due to the daily heating and cooling of the atmosphere which creates turbulent thermals. In addition, wind turbines often operate in the wake of upstream turbines such as in wind farms; where turbulence generated by the rotor can be compounded if the turbines are not sited properly. Although turbulent flow conditions are known to affect performance, i.e. power output and lifespan of the turbine, the flow mechanisms by which atmospheric turbulence and other external conditions (such as blade debris contamination) adversely impact wind turbines are not known in enough detail to address these issues. The main objectives of the current investigation are thus two-fold: (i) to understand the interaction of the turbulent integral length scales and surface roughness on the blade and its effect on aerodynamic performance, and (ii) to develop and apply flow control (both passive and active) techniques to alleviate some of the adverse fluid dynamics phenomena caused by the atmosphere (i.e. blade contamination) and restore some of the aerodynamic performance loss. In order to satisfy the objectives of the investigation, a 2-D blade model based on the S809 airfoil for horizontal axis wind turbine (HAWT) applications was manufactured and tested at the Johns Hopkins University Corrsin Stanley Wind Tunnel facility. Additional levels of free stream turbulence with an intensity of 6.14% and integral length scale of about 0.321 m was introduced into the flow via an active grid. The free stream velocity was 10 m/s resulting in a Reynolds number based on blade chord of Rec ≃ 2.08x105. Debris contamination on the blade was modeled as surface roughness

  11. An atmosphere-wave regional coupled model: improving predictions of wave heights and surface winds in the southern North Sea

    Science.gov (United States)

    Wahle, Kathrin; Staneva, Joanna; Koch, Wolfgang; Fenoglio-Marc, Luciana; Ho-Hagemann, Ha T. M.; Stanev, Emil V.

    2017-04-01

    The coupling of models is a commonly used approach when addressing the complex interactions between different components of earth systems. We demonstrate that this approach can result in a reduction of errors in wave forecasting, especially in dynamically complicated coastal ocean areas, such as the southern part of the North Sea - the German Bight. Here, we study the effects of coupling of an atmospheric model (COSMO) and a wind wave model (WAM), which is enabled by implementing wave-induced drag in the atmospheric model. The numerical simulations use a regional North Sea coupled wave-atmosphere model as well as a nested-grid high-resolution German Bight wave model. Using one atmospheric and two wind wave models simultaneously allows for study of the individual and combined effects of two-way coupling and grid resolution. This approach proved to be particularly important under severe storm conditions as the German Bight is a very shallow and dynamically complex coastal area exposed to storm floods. The two-way coupling leads to a reduction of both surface wind speeds and simulated wave heights. In this study, the sensitivity of atmospheric parameters, such as wind speed and atmospheric pressure, to the wave-induced drag, in particular under storm conditions, and the impact of two-way coupling on the wave model performance, is quantified. Comparisons between data from in situ and satellite altimeter observations indicate that two-way coupling improves the simulation of wind and wave parameters of the model and justify its implementation for both operational and climate simulations.

  12. A multi-model assessment of the impact of currents, waves and wind in modelling surface drifters and oil spill

    Science.gov (United States)

    De Dominicis, M.; Bruciaferri, D.; Gerin, R.; Pinardi, N.; Poulain, P. M.; Garreau, P.; Zodiatis, G.; Perivoliotis, L.; Fazioli, L.; Sorgente, R.; Manganiello, C.

    2016-11-01

    Validation of oil spill forecasting systems suffers from a lack of data due to the scarcity of oil slick in situ and satellite observations. Drifters (surface drifting buoys) are often considered as proxy for oil spill to overcome this problem. However, they can have different designs and consequently behave in a different way at sea, making it not straightforward to use them for oil spill model validation purposes and to account for surface currents, waves and wind when modelling them. Stemming from the need to validate the MEDESS4MS (Mediterranean Decision Support System for Marine Safety) multi-model oil spill prediction system, which allows access to several ocean, wave and meteorological operational model forecasts, an exercise at sea was carried out to collect a consistent dataset of oil slick satellite observations, in situ data and trajectories of different type of drifters. The exercise, called MEDESS4MS Serious Game 1 (SG1), took place in the Elba Island region (Western Mediterranean Sea) during May 2014. Satellite images covering the MEDESS4MS SG1 exercise area were acquired every day and, in the case an oil spill was observed from satellite, vessels of the Italian Coast Guard (ITCG) were sent in situ to confirm the presence of the pollution. During the exercise one oil slick was found in situ and drifters, with different water-following characteristics, were effectively deployed into the oil slick and then monitored in the following days. Although it was not possible to compare the oil slick and drifter trajectories due to a lack of satellite observations of the same oil slick in the following days, the oil slick observations in situ and drifters trajectories were used to evaluate the quality of MEDESS4MS multi-model currents, waves and winds by using the MEDSLIK-II oil spill model. The response of the drifters to surface ocean currents, different Stokes drift parameterizations and wind drag has been examined. We found that the surface ocean currents

  13. Numerical and Observational Investigations of Long-Lived Mcs-Induced Severe Surface Wind Events: the Derecho

    Science.gov (United States)

    Schmidt, Jerome Michael

    This study addresses the production of sustained, straight-line, severe surface winds associated with mesoscale convective systems (MCSs) of extratropical origin otherwise known as derechos. The physical processes which govern the observed derecho characteristics are identified and their possible forcing mechanisms are determined. Detailed observations of two derechos are presented along with simulations using the Colorado State University Regional Atmospheric Modeling System (CSU-RAMS). The observations revealed a derecho environment characterized by strong vertical wind shear through the depth of the troposphere and large values of convective available potential energy (CAPE). The thermodynamic environment of the troposphere in each case had a distinct three-layer structure consisting of: (i) a surface-based stable layer of 1-to-2 km in depth, (ii) an elevated well -mixed layer of 2-4 km in depth, and (iii) an upper tropospheric layer of intermediate stability that extended to the tropopause. Two primary sets of simulations were performed to assess the impact of the observed environmental profiles on the derecho structure, propagation, and longevity. The first set consisted of nested-grid regional-scale simulations initialized from the standard NMC analyses on a domain having relatively coarse horizontal resolution (75 km). The second set of simulations consisted of two and three-dimensional experiments initialized in a horizontally homogeneous environment having a relatively fine horizontal resolution (2 km) and explicit microphysics. The results from these experiments indicate the importance of convectively -induced gravity waves on the MCS structure, propagation, longevity, and severe surface wind development. The sensitivity of the simulated convection and gravity waves to variations in the vertical wind shear and moisture profiles are described. Detailed Doppler radar analyses and 3-D simulations of a severe, bow echo squall line are presented which reveal

  14. Failure Analysis and Thermochemical Surface Engineering of Bearings in the Wind Turbine Drivetrain

    DEFF Research Database (Denmark)

    West, Ole H.E.; Dahl, Kristian Vinter; Christiansen, Thomas Lundin

    A critical premature failure mode of rolling element bearings inside the wind turbine drivetrain is associated with the formation of so called white etching cracks (WECs). So far there is no consensus on the root cause of WEC failure and the exact influence of different drivers and their combinat......A critical premature failure mode of rolling element bearings inside the wind turbine drivetrain is associated with the formation of so called white etching cracks (WECs). So far there is no consensus on the root cause of WEC failure and the exact influence of different drivers...... and their combinations is not well understood. Various types of failed rolling element bearings from different positions inside the wind turbine drivetrain were investigated. Both conventional techniques as reflected light microscopy (RLM), scanning (SEM) and transmission (TEM) electron microscopy as well as electron...

  15. Modeling the effects of topography and wind on atmospheric dispersion of CO2 surface leakage at geologic carbon sequestration sites

    Energy Technology Data Exchange (ETDEWEB)

    Chow, Fotini K.; Granvold, Patrick W.; Oldenburg, Curtis M.

    2008-11-01

    Understanding the potential impacts of unexpected surface releases of CO{sub 2} is an essential part of risk assessment for geologic carbon sequestration sites. We have extended a mesoscale atmospheric model to model dense gas dispersion of CO{sub 2} leakage. The hazard from CO{sub 2} leakage is greatest in regions with topographic depressions where the dense gas can pool. Simulation of dispersion in idealized topographies shows that CO{sub 2} can persist even under high winds. Simulation of a variety of topographies, winds, and release conditions allows the generation of a catalog of simulation results that can be queried to estimate potential impacts at actual geologic carbon sequestration sites.

  16. Measurement of Wind Signatures on the Sea Surface using an L-band Polarimetric Radiometer

    DEFF Research Database (Denmark)

    Søbjærg, Sten Schmidl; Rotbøll, Jesper; Skou, Niels

    2002-01-01

    A series of circle flights have been carried out over the wind driven sea, using the EMIRAD L-band polarimetric radiometer, described in J. Rotboll et al. (2001). Data are calibrated and corrected for aircraft attitude, and 360 degrees azimuth profiles are generated. The results show some variation...... over a full circle, typically about 1 K, and no clear, repeated azimuth signature from circle to circle is identified. Averaging reduces the variations, and frequency analysis of the profiles show an almost flat spectrum, which excludes a simple extrapolation of wind signatures, known at higher...

  17. Application of the nonlinear time series prediction method of genetic algorithm for forecasting surface wind of point station in the South China Sea with scatterometer observations

    Science.gov (United States)

    Zhong, Jian; Dong, Gang; Sun, Yimei; Zhang, Zhaoyang; Wu, Yuqin

    2016-11-01

    The present work reports the development of nonlinear time series prediction method of genetic algorithm (GA) with singular spectrum analysis (SSA) for forecasting the surface wind of a point station in the South China Sea (SCS) with scatterometer observations. Before the nonlinear technique GA is used for forecasting the time series of surface wind, the SSA is applied to reduce the noise. The surface wind speed and surface wind components from scatterometer observations at three locations in the SCS have been used to develop and test the technique. The predictions have been compared with persistence forecasts in terms of root mean square error. The predicted surface wind with GA and SSA made up to four days (longer for some point station) in advance have been found to be significantly superior to those made by persistence model. This method can serve as a cost-effective alternate prediction technique for forecasting surface wind of a point station in the SCS basin. Project supported by the National Natural Science Foundation of China (Grant Nos. 41230421 and 41605075) and the National Basic Research Program of China (Grant No. 2013CB430101).

  18. Distribution and provenance of wind-blown SE Pacific surface sediments

    NARCIS (Netherlands)

    Saukel, C.; Lamy, F.; Stuut, J.B.W.; Tiedemann, R.; Vogt, C.

    2011-01-01

    The reconstruction of low-latitude ocean-atmosphere interactions is one of the major issues of (paleo-) environmental studies. The trade winds, extending over 20 degrees to 30 degrees of latitude in both hemispheres, between the subtropical highs and the intertropical convergence zone, are major com

  19. Scientific opportunities using satellite surface wind stress measurements over the ocean

    Science.gov (United States)

    1982-01-01

    Scientific opportunities that would be possible with the ability to collect wind data from space are highlighted. Minimum requirements for the space platform and ground data reduction system are assessed. The operational uses that may develop in government and commercial applications of these data are reviewed. The opportunity to predict the large-scale ocean anomaly called El Nino is highlighted.

  20. Breaking waves and near-surface sea spray aerosol dependence on changing winds: Wave breaking efficiency and bubble-related air-sea interaction processes

    Science.gov (United States)

    Hwang, P. A.; Savelyev, I. B.; Anguelova, M. D.

    2016-05-01

    Simultaneous measurements of sea spray aerosol (SSA), wind, wave, and microwave brightness temperature are obtained in the open ocean on-board Floating Instrument Platform (FLIP). These data are analysed to clarify the ocean surface processes important to SSA production. Parameters are formulated to represent surface processes with characteristic length scales spanning a broad range. The investigation reveals distinct differences of the SSA properties in rising winds and falling winds, with higher SSA volume in falling winds. Also, in closely related measurements of whitecap coverage, higher whitecap fraction as a function of wind speed is found in falling winds than in rising winds or in older seas than in younger seas. Similar trend is found in the short scale roughness reflected in the microwave brightness temperature data. In the research of length and velocity scales of breaking waves, it has been observed that the length scale of wave breaking is shorter in mixed seas than in wind seas. For example, source function analysis of short surface waves shows that the characteristic length scale of the dissipation function shifts toward higher wavenumber (shorter wavelength) in mixed seas than in wind seas. Similarly, results from feature tracking or Doppler analysis of microwave radar sea spikes, which are closely associated with breaking waves, show that the magnitude of the average breaking wave velocity is smaller in mixed seas than in wind seas. Furthermore, breaking waves are observed to possess geometric similarity. Applying the results of breaking wave analyses to the SSA and whitecap observations described above, it is suggestive that larger air cavities resulting from the longer breakers are entrained in rising high winds. The larger air cavities escape rapidly due to buoyancy before they can be fully broken down into small bubbles for the subsequent SSA production or whitecap manifestation. In contrast, in falling winds (with mixed seas more likely), the

  1. An Airborne Campaign Measuring Wind Signatures from the Sea Surface using an L-band Polarimetric Radiometer

    DEFF Research Database (Denmark)

    Søbjærg, Sten Schmidl; Skou, Niels

    2003-01-01

    A series of circle flights have been carried out over the sea surface, using the EMIRAD L-band polarimetric radiometer. Motion compensation is applied, and polarimetric azimuth signatures are generated. Single tracks show geophysical noise, typically about 2 K, but averaging decreases the noise, ......, but a comparison of the signature to the downwelling galactic background radiation indicates, that the signature may not origin from the wind driven sea surface pattern.......A series of circle flights have been carried out over the sea surface, using the EMIRAD L-band polarimetric radiometer. Motion compensation is applied, and polarimetric azimuth signatures are generated. Single tracks show geophysical noise, typically about 2 K, but averaging decreases the noise...

  2. High-resolution satellite-derived ocean surface winds in the Nordic-Barents seas region: Implications for ocean modeling (Invited)

    Science.gov (United States)

    Dukhovskoy, D. S.; Bourassa, M. A.; Hughes, P. J.

    2010-12-01

    High-resolution (0.25°) ocean surface wind velocity data derived from satellite observations are used to analyze winds in the Nordic-Barents seas during 2007-2008. For the analysis, a Cross-Calibrated, Multi-Platform (CCMP), multi-instrument ocean surface wind velocity data set is utilized. The product has been developed by National Aeronautics and Space Administration (NASA) within Making Earth Science data records for Use in Research Environments (MEaSUREs) Program. A variational method was used to combine wind measurements derived from satellite-born active and passive remote sensing instruments. In the objective procedure, winds from the European Centre for Medium-Range Weather Forecasts (ECMWF) Operational Analysis (DS111.1) were used as the background fields. The ocean surface wind fields are compared with those derived from the National Centers for Environmental Protection/National Center for Atmospheric Research (NCEP/NCAR) reanalysis. The NCEP/NCAR fields are commonly used to provide atmospheric forcing for Arctic Ocean models. The utility of using high-resolution winds in the ocean modeling is discussed. In particular, air-sea heat fluxes estimated from the two wind data sets are compared. It is anticipated that wind fields with higher spatial and temporal resolution will better resolve small-scale, short-lived atmospheric systems. As an example, the ice free region in the Nordic and Barents seas is frequently impacted by very intense cyclones known as “polar lows” with wind speeds near to or above gale force. A polar low forms over the sea and predominantly during the winter months. The size of these cyclones varies greatly from 100 to 1000 km. Presumably small-scale cyclones are misrepresented or not resolved in the NCAR fields leading to biases in the air-sea flux calculations in the ocean models. Inaccurate estimates of the air-sea fluxes eventually lead to biases in the Arctic Ocean model solutions.

  3. Global surface pressure measurements of static and dynamic stall on a wind turbine airfoil at low Reynolds number

    Science.gov (United States)

    Disotell, Kevin J.; Nikoueeyan, Pourya; Naughton, Jonathan W.; Gregory, James W.

    2016-05-01

    Recognizing the need for global surface measurement techniques to characterize the time-varying, three-dimensional loading encountered on rotating wind turbine blades, fast-responding pressure-sensitive paint (PSP) has been evaluated for resolving unsteady aerodynamic effects in incompressible flow. Results of a study aimed at demonstrating the laser-based, single-shot PSP technique on a low Reynolds number wind turbine airfoil in static and dynamic stall are reported. PSP was applied to the suction side of a Delft DU97-W-300 airfoil (maximum thickness-to-chord ratio of 30 %) at a chord Reynolds number of 225,000 in the University of Wyoming open-return wind tunnel. Static and dynamic stall behaviors are presented using instantaneous and phase-averaged global pressure maps. In particular, a three-dimensional pressure topology driven by a stall cell pattern is detected near the maximum lift condition on the steady airfoil. Trends in the PSP-measured pressure topology on the steady airfoil were confirmed using surface oil visualization. The dynamic stall case was characterized by a sinusoidal pitching motion with mean angle of 15.7°, amplitude of 11.2°, and reduced frequency of 0.106 based on semichord. PSP images were acquired at selected phase positions, capturing the breakdown of nominally two-dimensional flow near lift stall, development of post-stall suction near the trailing edge, and a highly three-dimensional topology as the flow reattaches. Structural patterns in the surface pressure topologies are considered from the analysis of the individual PSP snapshots, enabled by a laser-based excitation system that achieves sufficient signal-to-noise ratio in the single-shot images. The PSP results are found to be in general agreement with observations about the steady and unsteady stall characteristics expected for the airfoil.

  4. Succession of the sea-surface microlayer in the Baltic Sea under natural and experimentally induced low-wind conditions

    Directory of Open Access Journals (Sweden)

    C. Stolle

    2010-05-01

    Full Text Available The sea-surface microlayer (SML is located within the boundary between the atmosphere and hydrosphere. The high spatial and temporal variability of the SML's properties, however, have hindered a clear understanding of interactions between biotic and abiotic parameters at or across the air-water interface. Among the factors changing the physical and chemical environment of the SML, wind speed is an important one. In order to examine the temporal effects of minimized wind influence, SML samples were obtained from the southern Baltic Sea and from mesocosm experiments in a marina to study naturally and artificially calmed sea surfaces. Organic matter concentrations as well as abundance, 3H-thymidine incorporation, and the community composition of bacteria in the SML (bacterioneuston compared to the underlying bulk water (ULW were analyzed. In all SML samples, dissolved organic carbon and nitrogen were only slightly enriched and showed low temporal variability, whereas particulate organic carbon and nitrogen were generally greatly enriched and highly variable. This was especially pronounced in a dense surface film (slick that developed during calm weather conditions as well as in the artificially calmed mesocosms. Overall, bacterioneuston abundance and productivity correlated with changing concentrations of particulate organic matter. Moreover, changes in the community composition in the field study were stronger in the particle-attached than in the non-attached bacterioneuston. This implies that decreasing wind enhances the importance of particle-attached assemblages and finally induces a succession of the bacterial community in the SML. Eventually, under very calm meteorological conditions, there is an uncoupling of the bacterioneuston from the ULW.

  5. Sensitivity of Turbine-Height Wind Speeds to Parameters in Planetary Boundary-Layer and Surface-Layer Schemes in the Weather Research and Forecasting Model

    Science.gov (United States)

    Yang, Ben; Qian, Yun; Berg, Larry K.; Ma, Po-Lun; Wharton, Sonia; Bulaevskaya, Vera; Yan, Huiping; Hou, Zhangshuan; Shaw, William J.

    2017-01-01

    We evaluate the sensitivity of simulated turbine-height wind speeds to 26 parameters within the Mellor-Yamada-Nakanishi-Niino (MYNN) planetary boundary-layer scheme and MM5 surface-layer scheme of the Weather Research and Forecasting model over an area of complex terrain. An efficient sampling algorithm and generalized linear model are used to explore the multiple-dimensional parameter space and quantify the parametric sensitivity of simulated turbine-height wind speeds. The results indicate that most of the variability in the ensemble simulations is due to parameters related to the dissipation of turbulent kinetic energy (TKE), Prandtl number, turbulent length scales, surface roughness, and the von Kármán constant. The parameter associated with the TKE dissipation rate is found to be most important, and a larger dissipation rate produces larger hub-height wind speeds. A larger Prandtl number results in smaller nighttime wind speeds. Increasing surface roughness reduces the frequencies of both extremely weak and strong airflows, implying a reduction in the variability of wind speed. All of the above parameters significantly affect the vertical profiles of wind speed and the magnitude of wind shear. The relative contributions of individual parameters are found to be dependent on both the terrain slope and atmospheric stability.

  6. Sensitivity of Turbine-Height Wind Speeds to Parameters in Planetary Boundary-Layer and Surface-Layer Schemes in the Weather Research and Forecasting Model

    Science.gov (United States)

    Yang, Ben; Qian, Yun; Berg, Larry K.; Ma, Po-Lun; Wharton, Sonia; Bulaevskaya, Vera; Yan, Huiping; Hou, Zhangshuan; Shaw, William J.

    2016-07-01

    We evaluate the sensitivity of simulated turbine-height wind speeds to 26 parameters within the Mellor-Yamada-Nakanishi-Niino (MYNN) planetary boundary-layer scheme and MM5 surface-layer scheme of the Weather Research and Forecasting model over an area of complex terrain. An efficient sampling algorithm and generalized linear model are used to explore the multiple-dimensional parameter space and quantify the parametric sensitivity of simulated turbine-height wind speeds. The results indicate that most of the variability in the ensemble simulations is due to parameters related to the dissipation of turbulent kinetic energy (TKE), Prandtl number, turbulent length scales, surface roughness, and the von Kármán constant. The parameter associated with the TKE dissipation rate is found to be most important, and a larger dissipation rate produces larger hub-height wind speeds. A larger Prandtl number results in smaller nighttime wind speeds. Increasing surface roughness reduces the frequencies of both extremely weak and strong airflows, implying a reduction in the variability of wind speed. All of the above parameters significantly affect the vertical profiles of wind speed and the magnitude of wind shear. The relative contributions of individual parameters are found to be dependent on both the terrain slope and atmospheric stability.

  7. Relation between Dispersion Characteristics over Surfaces with Dissimilar Roughness and Atmospheric Stability, under Conditions of Equal Geostrophic Winds

    DEFF Research Database (Denmark)

    Gryning, Sven-Erik; Larsen, Søren Ejling

    1981-01-01

    A simple model was described that related the dispersion of material from ground-level sources at 2 areas, taking into account dissimilarities in the surface roughness parameter (z0) and the atmospheric stability characterized by the Monin-Obukhov length (L). The geostrophic wind speed was assumed...... that travelled a distance x; .hivin.z/L was found when z0/L and x/z0 were known. The model was reduced to 3 dimensionless parameters by merging .hivin.z/L for the 2 areas into a composite parameter. Dimensionless results from the model were illustrated for discrete values of this composite parameter....

  8. Characterisation and Simulation of the Multiscaling Properties of the Energy-Containing Scales of Horizontal Surface-Layer Winds

    Science.gov (United States)

    Lauren, Michael K.; Menabde, Merab; Seed, Alan W.; Austin, Geoffrey L.

    The multiscaling statistics of atmospheric surface-layer winds at low wavenumbers above farmland and in the lee of a mountain range were examined using a hot-wire and lightweight cup anemometer. It was found that the horizontal velocity spectra could be broken into high and low-wavenumber regimes according to the parameters given by this analysis. The low-wavenumber end of the spectrum possessed a spectral slope parameter that varied between values of 0.8 and 1.35 at the farmland site during the period of the experiment, and the high-wavenumber end - corresponding to the inertial range - possessed a spectral slope slightly greater than -5/3. The larger values for this parameter for the low-wavenumber end appeared to coincide with unstable conditions. In the lee of the mountain range, the low-wavenumber spectral slope parameter was larger still, at 1.45. The low-wavenumber signals over farmland were much less intermittent than inertial-range signals, but in the lee of the mountain range the intermittency increased. From this analysis, it was shown that the statistical properties of the recorded wind signal could be reproduced using a bounded random multiplicative cascade. The model was successfully used to simulate the wind velocity field directly, rather than simulating the energy dissipation field. Since the spectral slope parameter for low wavenumbers appeared to be a function of atmospheric stability, the method presented is a simple way of generating wind signals characteristic of a variety of atmospheric conditions.

  9. Using Image Pro Plus Software to Develop Particle Mapping on Genesis Solar Wind Collector Surfaces

    Science.gov (United States)

    Rodriquez, Melissa C.; Allton, J. H.; Burkett, P. J.

    2012-01-01

    The continued success of the Genesis mission science team in analyzing solar wind collector array samples is partially based on close collaboration of the JSC curation team with science team members who develop cleaning techniques and those who assess elemental cleanliness at the levels of detection. The goal of this collaboration is to develop a reservoir of solar wind collectors of known cleanliness to be available to investigators. The heart and driving force behind this effort is Genesis mission PI Don Burnett. While JSC contributes characterization, safe clean storage, and benign collector cleaning with ultrapure water (UPW) and UV ozone, Burnett has coordinated more exotic and rigorous cleaning which is contributed by science team members. He also coordinates cleanliness assessment requiring expertise and instruments not available in curation, such as XPS, TRXRF [1,2] and synchrotron TRXRF. JSC participates by optically documenting the particle distributions as cleaning steps progress. Thus, optical document supplements SEM imaging and analysis, and elemental assessment by TRXRF.

  10. Lunar surface magnetic fields and their interaction with the solar wind: results from lunar prospector

    Science.gov (United States)

    Lin; Mitchell; Curtis; Anderson; Carlson; McFadden; Acuna; Hood; Binder

    1998-09-04

    The magnetometer and electron reflectometer experiment on the Lunar Prospector spacecraft has obtained maps of lunar crustal magnetic fields and observed the interaction between the solar wind and regions of strong crustal magnetic fields at high selenographic latitude (30 degreesS to 80 degreesS) and low ( approximately 100 kilometers) altitude. Electron reflection maps of the regions antipodal to the Imbrium and Serenitatis impact basins, extending to 80 degreesS latitude, show that crustal magnetic fields fill most of the antipodal zones of those basins. This finding provides further evidence for the hypothesis that basin-forming impacts result in magnetization of the lunar crust at their antipodes. The crustal magnetic fields of the Imbrium antipode region are strong enough to deflect the solar wind and form a miniature (100 to several hundred kilometers across) magnetosphere, magnetosheath, and bow shock system.

  11. Limited fetch revisited: comparison of wind input terms in surface waves modeling

    CERN Document Server

    Andrei, Pushkarev

    2015-01-01

    The results of numerical solution of the Hasselmann kinetic equation ($HE$) for wind driven sea spectra in the fetch limited geometry are presented. Five versions of the source functions, including recently introduced ZRP model, have been studied for the exact expression of Snl and high-frequency implicit dissipation due to wave-breaking. Four out of five experiments were done in the absence of spectral peak dissipation for various Sin terms. They demonstrated the dominance of quadruplet wave-wave interaction in the energy balance and the formation of self-similar regimes of unlimited wave energy growth along the fetch. Between them was ZRP model, which showed especially good agreement with the dozen of field observations performed in the seas and lakes since 1971. The fifth, WAM3 wind input term experiment, used additional spectral peak dissipation and reproduced the results of previous similar numerical simulation, but was in a good agreement with the field experiments only for moderate fetches, demonstrati...

  12. Hybrid Eulerian and Lagrangian Simulation of Steep and Breaking Waves and Surface Fluxes in High Winds

    Science.gov (United States)

    2012-09-30

    codes are parallelized using message passing interface (MPI) based on domain decomposition. For SPH , graphics processing unit (GPU) computing, which is...aims at developing a numerical capability using a Lagrangian Smoothed Particle Hydrodynamics ( SPH ) method and an Eulerian Level-Set Method (LSM) for...the SPH and LSM with environmental input provided by coupled wind and wave simulations at far field; (2) Use the numerical method developed in (1

  13. A Stochastic Response Surface Method for Probabilistic Evaluation of the Voltage Stability Considering Wind Power

    Institute of Scientific and Technical Information of China (English)

    BAO Haibo; WEI Hua

    2012-01-01

    The traditional voltage stability analysis method is mostly based on the deterministic model, and ignores the uncertainties of bus loads, power supplies, changes in network configuration and so on. However, the great expansion of renewable power generations such as wind and solar energy in a power system has increased their uncertainty, and traditional techniques are limited in capturing their variable behavior. This leads to greater needs of new techniques and methodologies to properly quantify the voltage stability of power systems.

  14. Sea Surface Salinity and Wind Retrieval Algorithm Using Combined Passive-Active L-Band Microwave Data

    Science.gov (United States)

    Yueh, Simon H.; Chaubell, Mario J.

    2011-01-01

    Aquarius is a combined passive/active L-band microwave instrument developed to map the salinity field at the surface of the ocean from space. The data will support studies of the coupling between ocean circulation, the global water cycle, and climate. The primary science objective of this mission is to monitor the seasonal and interannual variation of the large scale features of the surface salinity field in the open ocean with a spatial resolution of 150 kilometers and a retrieval accuracy of 0.2 practical salinity units globally on a monthly basis. The measurement principle is based on the response of the L-band (1.413 gigahertz) sea surface brightness temperatures (T (sub B)) to sea surface salinity. To achieve the required 0.2 practical salinity units accuracy, the impact of sea surface roughness (e.g. wind-generated ripples and waves) along with several factors on the observed brightness temperature has to be corrected to better than a few tenths of a degree Kelvin. To the end, Aquarius includes a scatterometer to help correct for this surface roughness effect.

  15. Impacts of subgrid-scale orography parameterization on simulated surface layer wind and monsoonal precipitation in the high-resolution WRF model

    Science.gov (United States)

    Lee, Junhong; Shin, Hyeyum Hailey; Hong, Song-You; Jiménez, Pedro A.; Dudhia, Jimy; Hong, Jinkyu

    2015-01-01

    paper reports on the first attempt to investigate whether excessive precipitation over mountainous areas, which is a common problem in model simulations, could be remedied by the implementation of a more realistic surface wind field in the high-resolution Weather Research and Forecasting (WRF) model. A series of 48 h short-range forecasts was conducted for the month of July 2006 within the triple-nested WRF configuration, for which the highest resolution of 3 km was focused on areas with complex orography over East Asian monsoonal regions. For accurate surface wind simulations, the subgrid-scale (SGS) orography parameterization scheme was employed. It was found that the simulated surface wind showed negative (positive) bias over mountainous (flat) regions when the SGS orography parameterization was excluded. After inclusion of the SGS orography parameterization, wind speed over mountainous (flat) regions increased (decreased), implying that the bias was mitigated. Moisture divergence (convergence) over the mountains (on the leeward side of the mountains) was induced, and surface latent heat flux increased along the mountain ranges following the improvement in the representation of the surface wind by the inclusion of the SGS orography parameterization. Eventually, excessive precipitation simulated over mountainous areas of East Asia, which is a feature commonly observed in numerical model studies, was alleviated because of the moisture divergence and increased surface latent heat flux.

  16. A Large Eddy Simulation to determine the effect of trees on wind and turbulence over a suburban surface

    Science.gov (United States)

    Egli, P. E.; Giometto, M. G.; Tooke, T. R.; Krayenhoff, S.; Christen, A.; Parlange, M. B.

    2014-12-01

    Robust modeling of flow and turbulence within and over urban canopies is required to properly predict air pollution and dispersion in cities. Trees are an integral part of the urban landscape. In many suburban neighbourhoods, tree cover is 10 to 30% and trees are often taller than buildings. Effects of trees on drag, mean wind and turbulence in cities are not accounted for in current weather, air pollution and dispersion models. Our goal is to use high-resolution Large Eddy Simulations (LES) over a realistic urban canopy to determine the effects of trees on drag, mean wind and turbulence in the urban roughness sublayer (RSL). The simulated area is part of the Sunset-Neighbourhood in Vancouver, Canada. In this area, long-term wind and turbulence measurements are available from instruments on a 28m-tall tower. Further, a three-dimensional point cloud was captured from high precision airborne Light Detection and Ranging (LiDAR), and analyzed to represent the structural characteristics of both buildings and trees at high spatial resolution. Trees are described by location-specific leaf area density (LAD) profiles. LES simulations are performed over a 512 x 512m characteristic subset of the city that contains the tower location and predominant source area. In the LES, buildings are accounted for with an immersed boundary method, adopting a zero level-set distance function to localize the surface, whereas drag forces from trees are parametrized as a function of the height-dependent LAD. Spectra of streamwise and vertical velocity components compare well between tower data and the model data, confirming the good performance of LES in simulations of flow over fully rough surfaces. We show how the presence of trees impacts mean velocity and computed momentum flux profiles; they significantly decrease dispersive terms in the bulk of the flow. The impact of trees on integral length scales in the flow is discussed.

  17. Statistical downscaling of sea-surface wind over the Peru-Chile upwelling region: diagnosing the impact of climate change from the IPSL-CM4 model

    Energy Technology Data Exchange (ETDEWEB)

    Goubanova, K. [CNES/CNRS/IRD/UPS, Laboratoire d' Etudes en Geophysique et Oceanographie Spatiale, Toulouse (France); Instituto del Mar del Peru, Callao (Peru); Echevin, V.; Terray, P. [IPSL/UPMC/IRD, Laboratoire d' Oceanographie et de Climatologie, Experimentation et Approches Numeriques, Paris (France); Dewitte, B. [CNES/CNRS/IRD/UPS, Laboratoire d' Etudes en Geophysique et Oceanographie Spatiale, Toulouse (France); Instituto del Mar del Peru, Callao (Peru); Instituto Geofisico del Peru, Lima (Peru); Codron, F. [UPMC/CNRS, Laboratoire de Meteorologie Dynamique, Paris (France); Takahashi, K. [Instituto Geofisico del Peru, Lima (Peru); Vrac, M. [IPSL/CNRS/CEA/UVSQ, Laboratoire des Sciences du Climat et de l' Environnement, Gif-sur-Yvette (France)

    2011-04-15

    The key aspect of the ocean circulation off Peru-Chile is the wind-driven upwelling of deep, cold, nutrient-rich waters that promote a rich marine ecosystem. It has been suggested that global warming may be associated with an intensification of upwelling-favorable winds. However, the lack of high-resolution long-term observations has been a limitation for a quantitative analysis of this process. In this study, we use a statistical downscaling method to assess the regional impact of climate change on the sea-surface wind over the Peru-Chile upwelling region as simulated by the global coupled general circulation model IPSL-CM4. Taking advantage of the high-resolution QuikSCAT wind product and of the NCEP reanalysis data, a statistical model based on multiple linear regressions is built for the daily mean meridional and zonal wind at 10 m for the period 2000-2008. The large-scale 10 m wind components and sea level pressure are used as regional circulation predictors. The skill of the downscaling method is assessed by comparing with the surface wind derived from the ERS satellite measurements, with in situ wind observations collected by ICOADS and through cross-validation. It is then applied to the outputs of the IPSL-CM4 model over stabilized periods of the pre-industrial, 2 x CO{sub 2} and 4 x CO{sub 2} IPCC climate scenarios. The results indicate that surface along-shore winds off central Chile (off central Peru) experience a significant intensification (weakening) during Austral winter (summer) in warmer climates. This is associated with a general decrease in intra-seasonal variability. (orig.)

  18. Transient stability and control of wind turbine generation based on Hamiltonian surface shaping and power flow control

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, David G.; Robinett, Rush D. III [Sandia National Laboratories, Albuquerque, NM (United States). Energy, Resources and Systems Analysis Center

    2010-07-01

    The swing equations for renewable generators connected to the grid are developed and a simple wind turbine with UPFC is used as an example. The swing equations for renewable generator are formulated as a natural Hamiltonian system with externally applied non-conservative forces. A two-step process referred to as Hamiltonian Surface Shaping and Power Flow Control (HSSPFC) is used to analyze and design feedback controllers for the renewable generators system. This formulation extends previous results on the analytical verification of the Potential Energy Boundary Surface (PEBS) method to nonlinear control analysis and design and justifies the decomposition of the system into conservative and nonconservative systems to enable a two-step, serial analysis and design procedure. This paper presents the analysis and numerical simulation results for a nonlinear control design example that includes the One-Machine Infinite Bus (OMIB) system with a Unified Power Flow Control (UPEC) and applied to a simplified wind turbine generator. The needed power and energy storage/charging responses are also determined. (orig.)

  19. Significance of frost action and surface soil characteristics to wind erosion at Rocky Flats, Colorado. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Caine, N.

    1978-09-01

    This study of the potential links between soil freezing and wind erosion was conducted at Rocky Flats during 4 winters. Most of the study has involved the conditions leading to the growth of segregation ice in the surface soil and the ground heave which that produces. This occurs about 15 times in the average winter at Rocky Flats, always on a diurnal cycle. Such frost action is preferentially distributed in time and space and cannot be estimated from air temperatures alone. November and March are the months of most frequent frost heave, and then only in the days following precipitation or snowmelt. The most marked frost effects are found on exposed interfluve and hillcrest situations, where there are patches of bare soil. Almost no effects are found on the valley floors. Soil disturbance by segregation ice leads to a marked decrease in soil bulk density, and presumably in soil strength though this change has not been quantitatively defined. However, this does not lead to wind erosion of the soil at the study site because that surface is more influenced by the vegetation cover than by the soil characteristics.

  20. A probability index for surface zonda wind occurrence at Mendoza city through vertical sounding principal components analysis

    Science.gov (United States)

    Otero, Federico; Norte, Federico; Araneo, Diego

    2016-10-01

    The aim of this work is to obtain an index for predicting the probability of occurrence of zonda event at surface level from sounding data at Mendoza city, Argentine. To accomplish this goal, surface zonda wind events were previously found with an objective classification method (OCM) only considering the surface station values. Once obtained the dates and the onset time of each event, the prior closest sounding for each event was taken to realize a principal component analysis (PCA) that is used to identify the leading patterns of the vertical structure of the atmosphere previously to a zonda wind event. These components were used to construct the index model. For the PCA an entry matrix of temperature (T) and dew point temperature (Td) anomalies for the standard levels between 850 and 300 hPa was build. The analysis yielded six significant components with a 94 % of the variance explained and the leading patterns of favorable weather conditions for the development of the phenomenon were obtained. A zonda/non-zonda indicator c can be estimated by a logistic multiple regressions depending on the PCA component loadings, determining a zonda probability index widehat{c} calculable from T and Td profiles and it depends on the climatological features of the region. The index showed 74.7 % efficiency. The same analysis was performed by adding surface values of T and Td from Mendoza Aero station increasing the index efficiency to 87.8 %. The results revealed four significantly correlated PCs with a major improvement in differentiating zonda cases and a reducing of the uncertainty interval.

  1. Numerical Study of Wind Turbine Wake Modeling Based on a Actuator Surface Model

    DEFF Research Database (Denmark)

    Zhou, Huai-yang; Xu, Chang; Han, Xing Xing

    2017-01-01

    In the Actuator Surface Model (ALM), the turbine blades are represented by porous surfaces of velocity and pressure discontinuities to model the action of lifting surfaces on the flow. The numerical simulation is implemented on FLUENT platform combined with N-S equations. This model is improved...

  2. Unified Program for the Specification of Hurricane Boundary Layer Winds Over Surfaces of Specified Roughness.

    Science.gov (United States)

    1992-09-01

    commercial products. rFnn APWn.,W REPORT DOCUMENTATION PAGE oJ_ NO_ o____ PUNK GOPo m=for ta.meuarnca €4 rwmton It "s to "Wuqe I a"oW a•. ama, Wmusma e tune...the mesh size and K is a non-dimensional constant (K = .4 is assumed). The drag coefficient was assumed to increase linearly with wind speed CD a (0.5...system; if the mesh size of the innermost nest is say 5 kln, the second through fifth mesh sizes are 10 , 20 , 40 , and 80 km respectively, and the

  3. Abnormal Shape Mould Winding

    Institute of Scientific and Technical Information of China (English)

    Fu Hongya; Wang Xianfeng; Han Zhenyu; Fu Yunzhong

    2007-01-01

    A theory of composite material patch winding is proposed to determine the winding trajectory with a meshed data model. Two different conditions are considered in this study. One is Bridge condition on the concave surface and the other is Slip line condition in the process of patch winding. This paper presents the judgment principles and corresponding solutions by applying differential geometry theory and space geometry theory. To verify the feasibility of the patch winding method, the winding control code is programmed. Furthermore, the winding experiments on an airplane inlet and a vane are performed. From the experiments, it shows that the patch winding theory has the advantages of flexibility, easy design and application.

  4. Limited fetch revisited: Comparison of wind input terms, in surface wave modeling

    Science.gov (United States)

    Pushkarev, Andrei; Zakharov, Vladimir

    2016-07-01

    Results pertaining to numerical solutions of the Hasselmann kinetic equation (HE), for wind driven sea spectra, in the fetch limited geometry, are presented. Five versions of source functions, including the recently introduced ZRP model (Zakharov et al., 2012), have been studied, for the exact expression of Snl and high-frequency implicit dissipation, due to wave-breaking. Four of the five experiments were done in the absence of spectral peak dissipation for various Sin terms. They demonstrated the dominance of quadruplet wave-wave interaction, in the energy balance, and the formation of self-similar regimes, of unlimited wave energy growth, along the fetch. Between them was the ZRP model, which strongly agreed with dozens of field observations performed in the seas and lakes, since 1947. The fifth, the WAM3 wind input term experiment, used additional spectral peak dissipation and reproduced the results of a previous, similar, numerical simulation described in Komen et al. (1994), but only supported the field experiments for moderate fetches, demonstrating a total energy saturation at half of that of the Pierson-Moscowits limit. The alternative framework for HE numerical simulation is proposed, along with a set of tests, allowing one to select physically-justified source terms.

  5. DISCUSS ON THE SEA SURFACE ROUGHNESS OF THE WIND ENERGY ASSESSMENT IN THE OFFSHORE WIND FARM%海上风电场风能计算中关于海面粗糙度问题的探讨

    Institute of Scientific and Technical Information of China (English)

    彭秀芳; 王秀杰; 辜晋德

    2012-01-01

    The offshore roughness length is an important influence factor on the offshore wind energy resource assessment. A novel method to calculate the offshore roughness length to deduce the sea surface roughness using measured wind speed at 10m altitude was presented. Based on the analysis, calculation and comparison with the measured wind speed, wind velocity error was 2. 04 percent using the novel method while it was 4. 51 percent using the traditional calculation method. Wind energy density error is 10. 39 percent comparing with 16. 88 percent using the traditional method. The errors for wind speed and wind power density in the windy periods, using traditional calculation method were 3.42% and 5.04%. The example shows that it is more reliable to assess the wind energy resource using the new method.%提出一种利用海上10m高度的实测风速推求海面粗糙度的新方法.通过分析计算并与实测值进行对比,采用新方法计算时,风速误差为2.04%,风功率密度的误差为10.39%;采用传统零粗糙度计算方法时,风速误差为4.51%,风功率密度的误差为16.88%;在大风时段,用新方法计算时风速和风功率密度的计算结果比传统方法的计算结果更接近实测值.实例表明:采用新的粗糙度计算方法能够使海面推求的风资源结果更接近真实值.

  6. The effect of wind-generated bubbles on sea-surface backscatter

    OpenAIRE

    Vossen, R.; Ainslie, M.A.

    2009-01-01

    Predictions of sea-surface back-scattering strength are needed for sonar performance modelling. Such predictions are hampered by two problems. First, measurements of surface back-scattering are not available at small grazing angles. These are of special interest to low-frequency active sonar since they mainly contribute to long range propagation. Second, existing theoretical models based on a bubble-free interface underestimate the surface back-scattering strength at larger grazing angles. We...

  7. Surface melt and ponding on Larsen C Ice shelf and the impact of foehn winds

    OpenAIRE

    Luckman, Adrian; Elvidge, Andrew; Jansen, Daniela; Kulessa, Bernd; Kuipers-Munneke, Peter; King, John; Barrand, Nick

    2014-01-01

    A common precursor to ice shelf disintegration, most notably that of Larsen B Ice Shelf, is unusually intense or prolonged surface melt and the presence of surface standing water. However, there has been little research into detailed patterns of melt on ice shelves or the nature of summer melt ponds. We investigated surface melt on Larsen C Ice Shelf at high resolution using Envisat advanced synthetic aperture radar (ASAR) data and explored melt ponds in a range of satellite image...

  8. The seasonal variations in the significant wave height and sea surface wind speed of the China’s seas

    Institute of Scientific and Technical Information of China (English)

    ZHENG Chongwei; PAN Jing; TAN Yanke; GAO Zhansheng; RUI Zhenfeng; CHEN Chaohui

    2015-01-01

    Long-term variations in a sea surface wind speed (WS) and a significant wave height (SWH) are associated with the global climate change, the prevention and mitigation of natural disasters, and an ocean resource exploitation, and other activities. The seasonal characteristics of the long-term trends in China’s seas WS and SWH are determined based on 24 a (1988–2011) cross-calibrated, multi-platform (CCMP) wind data and 24 a hindcast wave data obtained with the WAVEWATCH-III (WW3) wave model forced by CCMP wind data. The results show the following. (1) For the past 24 a, the China’s WS and SWH exhibit a significant increasing trend as a whole, of 3.38 cm/(s·a) in the WS, 1.3 cm/a in the SWH. (2) As a whole, the increasing trend of the China’s seas WS and SWH is strongest in March-April-May (MAM) and December-January-February (DJF), followed by June-July-August (JJA), and smallest in September-October-November (SON). (3) The areal extent of significant increases in the WS was largest in MAM, while the area decreased in JJA and DJF;the smallest area was apparent in SON. In contrast to the WS, almost all of China’s seas exhibited a significant increase in SWH in MAM and DJF;the range was slightly smaller in JJA and SON. The WS and SWH in the Bohai Sea, the Yellow Sea, East China Sea, the Tsushima Strait, the Taiwan Strait, the northern South China Sea, the Beibu Gulf, and the Gulf of Thailand exhibited a significant increase in all seasons. (4) The variations in China’s seas SWH and WS depended on the season. The areas with a strong increase usually appeared in DJF.

  9. A Probability Distribution of Surface Elevation for Wind Waves in Terms of the Gram-Charlier Series

    Institute of Scientific and Technical Information of China (English)

    黄传江; 戴德君; 王伟; 钱成春

    2003-01-01

    Laboratory experiments are conducted to study the probability distribution of surface elevation for wind waves and the convergence is discussed of the Gram-Charlier series in describing the surface elevation distribution. Results show that the agreement between the Gram-Charlier series and the observed distribution becomes better and better as the truncated order of the series increases in a certain range, which is contrary to the phenomenon observed by Huang and Long (1980). It is also shown that the Gram-Charlier series is sensitive to the anomalies in the data set which will make the agreement worse if they are not preprocessed appropriately. Negative values of the probability distribution expressed by the Gram-Charlier series in some ranges of surface elevations are discussed, but the absolute values of the negative values as well as the ranges of their occurrence become smaller gradually as more and more terms are included. Therefore the negative values will have no evident effect on the form of the whole surface elevation distribution when the series is truncated at higher orders. Furthermore, a simple recurrence formula is obtained to calculate the coefficients of the Gram-Charlier series in order to extend the Gram-Charlier series to high orders conveniently.

  10. Application of Surface Protective Coating to Enhance Environment-Withstanding Property of the MEMS 2D Wind Direction and Wind Speed Sensor

    Directory of Open Access Journals (Sweden)

    Kyu-Sik Shin

    2017-09-01

    Full Text Available In this study, a microelectromechanical system (MEMS two-dimensional (2D wind direction and wind speed sensor consisting of a square heating source and four thermopiles was manufactured using the heat detection method. The heating source and thermopiles of the manufactured sensor must be exposed to air to detect wind speed and wind direction. Therefore, there are concerns that the sensor could be contaminated by deposition or adhesion of dust, sandy dust, snow, rain, and so forth, in the air, and that the membrane may be damaged by physical shock. Hence, there was a need to protect the heating source, thermopiles, and the membrane from environmental and physical shock. The upper protective coating to protect both the heating source and thermopiles and the lower protective coating to protect the membrane were formed by using high-molecular substances such as SU-8, Teflon and polyimide (PI. The sensor characteristics with the applied protective coatings were evaluated.

  11. Application of Surface Protective Coating to Enhance Environment-Withstanding Property of the MEMS 2D Wind Direction and Wind Speed Sensor.

    Science.gov (United States)

    Shin, Kyu-Sik; Lee, Dae-Sung; Song, Sang-Woo; Jung, Jae Pil

    2017-09-19

    In this study, a microelectromechanical system (MEMS) two-dimensional (2D) wind direction and wind speed sensor consisting of a square heating source and four thermopiles was manufactured using the heat detection method. The heating source and thermopiles of the manufactured sensor must be exposed to air to detect wind speed and wind direction. Therefore, there are concerns that the sensor could be contaminated by deposition or adhesion of dust, sandy dust, snow, rain, and so forth, in the air, and that the membrane may be damaged by physical shock. Hence, there was a need to protect the heating source, thermopiles, and the membrane from environmental and physical shock. The upper protective coating to protect both the heating source and thermopiles and the lower protective coating to protect the membrane were formed by using high-molecular substances such as SU-8, Teflon and polyimide (PI). The sensor characteristics with the applied protective coatings were evaluated.

  12. An analytical two-flow model to simulate the distribution of irradiance in coastal waters with a wind-roughed surface and bottom reflectance

    Science.gov (United States)

    Ma, Wei-Ming

    1997-06-01

    An analytical two-flow model is derived from the radiative transfer equation to simulate the distribution of irradiance in coastal waters with a wind-roughed surface and bottom reflectance. The model utilizes unique boundary conditions, including the surface slope of the downwelling and upwelling irradiance as well as the influence of wind and bottom reflectance on simulated surface reflectance. The developed model provides a simple mathematical concept for understanding the irradiant light flux and associated processes in coastal or fresh water as well as turbid estuarine waters. The model is applied to data from the Banana River and coastal Atlantic Ocean water off the east coast of central Florida, USA. The two-flow irradiance model is capable of simulating realistic above-surface reflectance signatures under wind-roughened air-water surface given realistic input parameters including a specular flux conversion coefficient, absorption coefficient, backscattering coefficient, atmospheric visibility, bottom reflectance, and water depth. The root-mean-squared error of the calculated above-surface reflectances is approximately 3% in the Banana River and is less than 15% in coastal Atlantic Ocean off the east of Florida. Result of the subsurface reflectance sensitivity analysis indicates that the specular conversion coefficient is the most sensitive parameter in the model, followed by the beam attenuation coefficient, absorption coefficient, water depth, backscattering coefficient, specular irradiance, diffuse irradiance, bottom reflectance, and wind speed. On the other hand, result of the above-surface reflectance sensitivity analysis indicates that the wind speed is the most important parameter, followed by bottom reflectance, attenuation coefficient, water depth, conversion coefficient, specular irradiance, downwelling irradiance, absorption coefficient, and backscattering coefficient. Model results depend on the accuracy of these parameters to a large degree and

  13. The effect of wind-generated bubbles on sea-surface backscattering at 940 Hz

    NARCIS (Netherlands)

    Vossen, R. van; Ainslie, M.A.

    2011-01-01

    Reliable predictions of sea-surface backscattering strength are required for sonar performance modeling. These are, however, difficult to obtain as measurements of sea-surface backscattering are not available at small grazing angles relevant to low-frequency active sonar (1-3 kHz). Accurate theoreti

  14. The effect of wind-generated bubbles on sea-surface backscatter

    NARCIS (Netherlands)

    Vossen, R. van; Ainslie, M.A.

    2009-01-01

    Predictions of sea-surface back-scattering strength are needed for sonar performance modelling. Such predictions are hampered by two problems. First, measurements of surface back-scattering are not available at small grazing angles. These are of special interest to low-frequency active sonar since t

  15. Surface melt and ponding of Larsen C Ice Shelf and the impact of foehn winds

    NARCIS (Netherlands)

    Luckman, Adrian; Elvidge, Andrew; Jansen, Daniela; Kulessa, Bernd; Kuipers Munneke, Peter|info:eu-repo/dai/nl/304831891; King, John; Barrand, Nicholas

    2014-01-01

    A common precursor to ice shelf disintegration, most notably that of Larsen B Ice Shelf, is unusually intense or prolonged surface melt and the presence of surface standing water. However, there has been little research into detailed patterns of melt on ice shelves or the nature of summer melt

  16. Analysis, design and implementation of sensorless V/f control in a surface-mounted PMSM without damper winding

    Indian Academy of Sciences (India)

    SOURABH PAITANDI; MAINAK SENGUPTA

    2017-08-01

    This paper presents a novel, reliable and efficient V/f control implementation on a 8-pole, 750 rpm, 5 kW surface-mounted permanent magnet synchronous motor (PMSM) without damper winding. In the absence of a damper winding, open loop V/f control of SM is inherently unstable, particularly at high speeds. Stabilisationcan be done with proper stator frequency modulation in accordance with the change in rotor speed to provide for effect of damping. This has been implemented here without use of any shaft-mounted encoder. The change in rotor speed is observed from power perturbation, thereby eliminating the need for using a speed sensor in the drive. The efficiency of the drive is further increased with appropriate control of the power factor, irrespective of load and frequency variations. Simulated and experimental results are presented for both open loop and the proposed V/f control. These results establish the accuracy of the design of the proposed V/f control strategy and the precision of hardware implementation. A comparative study between the proposed V/f control method and standard vector control method, as implemented on this PMSM, has also been presented here to establish the advantages of the proposed scheme. The PMSM itself was designed and fabricated in the laboratory.

  17. CORONAL HEATING BY SURFACE ALFVEN WAVE DAMPING: IMPLEMENTATION IN A GLOBAL MAGNETOHYDRODYNAMICS MODEL OF THE SOLAR WIND

    Energy Technology Data Exchange (ETDEWEB)

    Evans, R. M. [NASA Goddard Space Flight Center, Space Weather Lab, Greenbelt, MD 20771 (United States); Opher, M. [Astronomy Department, Boston University, 675 Commonwealth Avenue, Boston, MA 02215 (United States); Oran, R.; Van der Holst, B.; Sokolov, I. V.; Frazin, R.; Gombosi, T. I. [Center for Space Environment Modeling, University of Michigan, 2455 Hayward Street, Ann Arbor, MI 48109 (United States); Vasquez, A., E-mail: Rebekah.e.frolov@nasa.gov [Instituto de Astronomia y Fisica del Espacio (CONICET-UBA) and FCEN (UBA), CC 67, Suc 28, Ciudad de Buenos Aires (Argentina)

    2012-09-10

    The heating and acceleration of the solar wind is an active area of research. Alfven waves, because of their ability to accelerate and heat the plasma, are a likely candidate in both processes. Many models have explored wave dissipation mechanisms which act either in closed or open magnetic field regions. In this work, we emphasize the boundary between these regions, drawing on observations which indicate unique heating is present there. We utilize a new solar corona component of the Space Weather Modeling Framework, in which Alfven wave energy transport is self-consistently coupled to the magnetohydrodynamic equations. In this solar wind model, the wave pressure gradient accelerates and wave dissipation heats the plasma. Kolmogorov-like wave dissipation as expressed by Hollweg along open magnetic field lines was presented in van der Holst et al. Here, we introduce an additional dissipation mechanism: surface Alfven wave (SAW) damping, which occurs in regions with transverse (with respect to the magnetic field) gradients in the local Alfven speed. For solar minimum conditions, we find that SAW dissipation is weak in the polar regions (where Hollweg dissipation is strong), and strong in subpolar latitudes and the boundaries of open and closed magnetic fields (where Hollweg dissipation is weak). We show that SAW damping reproduces regions of enhanced temperature at the boundaries of open and closed magnetic fields seen in tomographic reconstructions in the low corona. Also, we argue that Ulysses data in the heliosphere show enhanced temperatures at the boundaries of fast and slow solar wind, which is reproduced by SAW dissipation. Therefore, the model's temperature distribution shows best agreement with these observations when both dissipation mechanisms are considered. Lastly, we use observational constraints of shock formation in the low corona to assess the Alfven speed profile in the model. We find that, compared to a polytropic solar wind model, the wave

  18. An experimental study on the characteristics of wind-driven surface water film flows by using a multi-transducer ultrasonic pulse-echo technique

    Science.gov (United States)

    Liu, Yang; Chen, Wen-Li; Bond, Leonard J.; Hu, Hui

    2017-01-01

    An experimental study was conducted to investigate the characteristics of surface water film flows driven by boundary layer winds over a test plate in order to elucidate the underlying physics pertinent to dynamic water runback processes over ice accreting surfaces of aircraft wings. A multi-transducer ultrasonic pulse-echo (MTUPE) technique was developed and applied to achieve non-intrusive measurements of water film thickness as a function of time and space to quantify the transient behaviors of wind-driven surface water film flows. The effects of key controlling parameters, including freestream velocity of the airflow and flow rate of the water film, on the dynamics of the surface water runback process were examined in great details based on the quantitative MTUPE measurements. While the thickness of the wind-driven surface water film was found to decrease rapidly with the increasing airflow velocity, various surface wave structures were also found to be generated at the air/water interface as the surface water runs back. The evolution of the surface wave structures, in the terms of wave shape, frequency and propagation velocity of the surface waves, and instability modes (i.e., well-organized 2-D waves vs. 3-D complex irregular waves), was found to change significantly as the airflow velocity increases. Such temporally synchronized and spatially resolved measurements are believed to be very helpful to elucidate the underlying physics for improved understanding of the dynamics of water runback process pertinent to aircraft icing phenomena.

  19. Effects of surface roughness and cross-sectional distortion on the wind-induced response of bridge cables in dry conditions

    DEFF Research Database (Denmark)

    Matteoni, G.; Georgakis, Christos T.

    2015-01-01

    by local alterations of their inherent surface roughness and shape. Small deviations from ideal circularity result in significant changes in the static drag and lift coefficients with Reynolds number. The present study focuses on the wind-induced response of a full-scale yawed bridge cable section model......, for varying Reynolds numbers and wind angles-of-attack. Using passive-dynamic wind tunnel tests, it is shown that the in-plane aerodynamic damping of a bridge cable section, and the overall dynamic response, is strongly affected by changes in the wind angle-of-attack. Using the drag and lift coefficients......, determined in static conditions for an identical cable model as the one used for passive-dynamic tests, the in-plane aerodynamic damping is evaluated by employing a one-degree-of-freedom (1 DOF) quasi-steady analytical model. Similarly, it is shown that regions of instability associated with the occurrence...

  20. [Multiple scattering of visible and infrared light by sea fog over wind driving rough sea surface].

    Science.gov (United States)

    Sun, Xian-Ming; Wang, Hai-Hua; Lei, Cheng-Xin; Shen, Jin

    2013-08-01

    The present paper is concerned with computing the multiple scattering characteristics of a sea fog-sea surface couple system within this context. The single scattering characteristics of sea fog were studied by Mie theory, and the multiple scattering of sunlight by single sea fog layer was studied by radiative transfer theory. The reflection function of a statistically rough ocean surface was obtained using the standard Kirchhoff formulation, with shadowing effects taken into account. The reflection properties of the combined sea fog and ocean surface were obtained employing the adding method, and the results indicated that the reflected light intensity of sea fog increased with the sea background.

  1. East-west coastal asymmetry in the summertime near surface wind speed and its projected change in future climate over the Indian region

    Science.gov (United States)

    Saha, Upal; Chakraborty, Rohit; Maitra, Animesh; Singh, A. K.

    2017-05-01

    The behaviors of various meteorological parameters during 1981-2010 are investigated to obtain any asymmetric variability of summertime near surface wind over Indian coastal boundaries. No significant changes were obtained in the trends of surface pressure, surface relative humidity, 2-metre temperature and surface precipitation; although, near surface wind speed is found to have significantly declined on the eastern coast with respect to the western coast during this period. Summertime surface wind speed on the eastern coast have decreased from 3.5 to 2.5 m s- 1 (7 to 5 knots) whereas 4.5 to 4 m s- 1 (9 to 8 knots) during the last three decades (statistical significance level 95%). A decrease in the atmospheric instability may serve as the potential reason for the suppression of severe convective occurrences manifested by a parallel decrease in surface wind speeds over these regions. The local heating up of middle atmosphere (300-500 hPa pressure level) due to increased humidity and the difference in net heat flux over Arabian Sea and Bay of Bengal due to the variance of temperature gradient (1000-925 hPa) along the coastal boundaries might be responsible for this climatic disparity between the coastal regions of India since the last three decades. Summertime near surface wind speed projections for Indian sub-continent based on 7 best climate models, for RCP8.5 scenarios, has been calculated to show a mean increase by 10-15% on the eastern coast (Eastern Ghats), 1-2% on the western coasts (Western Ghats), 1-5% decrease in the Indo-Gangetic Basin and 3% decrease in the Gangetic West Bengal and adjoining Bangladesh.

  2. Flexible Slippery Surface to Manipulate Droplet Coalescence and Sliding, and Its Practicability in Wind-Resistant Water Collection.

    Science.gov (United States)

    Wang, Yuanfeng; Qian, Baitai; Lai, Chuilin; Wang, Xiaowen; Ma, Kaikai; Guo, Yujuan; Zhu, Xingli; Fei, Bin; Xin, John H

    2017-07-26

    A flexible slippery membrane (FSM) with tunable morphology and high elastic deformability has been developed by infusing perfluoropolyether (PFPE) into a fluorinated-copolymer-modified thermoplastic polyurethane (TPU) nanofiberous membrane. To immobilize PFPE in TPU matrix, we synthesized a fluorinated-copolymer poly(DFMA-co-IBOA-co-LMA) with low surface energy, high chemical affinity to PFPE, adequate flexibility, and strong physical adhesion on TPU. Upon external tensile stress, the as-prepared FSM can realize a real-time manipulation of water sliding and coalescence on it. Furthermore, it exhibits the ability to preserve the captured water from being blown away by strong wind, which ensures the water collection efficiency in windy regions.

  3. A GIS Approach to Wind,SST(Sea Surface Temperature) and CHL(Chlorophyll) variations in the Caspian Sea

    Science.gov (United States)

    Mirkhalili, Seyedhamzeh

    2016-07-01

    Chlorophyll is an extremely important bio-molecule, critical in photosynthesis, which allows plants to absorb energy from light. At the base of the ocean food web are single-celled algae and other plant-like organisms known as Phytoplankton. Like plants on land, Phytoplankton use chlorophyll and other light-harvesting pigments to carry out photosynthesis. Where Phytoplankton grow depends on available sunlight, temperature, and nutrient levels. In this research a GIS Approach using ARCGIS software and QuikSCAT satellite data was applied to visualize WIND,SST(Sea Surface Temperature) and CHL(Chlorophyll) variations in the Caspian Sea.Results indicate that increase in chlorophyll concentration in coastal areas is primarily driven by terrestrial nutrients and does not imply that warmer SST will lead to an increase in chlorophyll concentration and consequently Phytoplankton abundance.

  4. Effect of attenuation correction on surface amplitude distribution of wind waves

    Digital Repository Service at National Institute of Oceanography (India)

    Varkey, M.J.

    Some selected wave profiles recorded using a ship borne wave recorder are analysed to study the effect of attenuation correction on the distribution of the surface amplitudes. A new spectral width parameter is defined to account for wide band...

  5. Numerical simulation of wind wave surface profiles with tuned phase spectra

    Digital Repository Service at National Institute of Oceanography (India)

    Varkey, M.J.

    to nonlinear waves with vertical and horizontal asymmetries especially in the case of breaking and shoaling waves. Hence, the inverse method of computing the surface profile from a known autospectrum using transformed (tuned) phase spectrum with coupling...

  6. Role of surface wind and vegetation cover in multi-decadal variations of dust emission in the Sahara and Sahel

    Science.gov (United States)

    Kim, Dongchul; Chin, Mian; Remer, Lorraine A.; Diehl, Thomas; Bian, Huisheng; Yu, Hongbin; Brown, Molly E.; Stockwell, William R.

    2017-01-01

    North Africa, the world's largest dust source, is non-uniform, consisting of a permanently arid region (Sahara), a semi-arid region (Sahel), and a relatively moist vegetated region (Savanna), each with very different rainfall patterns and surface conditions. This study aims to better understand the controlling factors that determine the variation of dust emission in North Africa over a 27-year period from 1982 to 2008, using observational data and model simulations. The results show that the model-derived Saharan dust emission is only correlated with the 10-m winds (W10m) obtained from reanalysis data, but the model-derived Sahel dust emission is correlated with both W10m and the Normalized Difference Vegetation Index (NDVI) that is obtained from satellite. While the Saharan dust accounts for 82% of the continental North Africa dust emission (1340-1570 Tg year-1) in the 27-year average, the Sahel accounts for 17% with a larger seasonal and inter-annual variation (230-380 Tg year-1), contributing about a quarter of the transatlantic dust transported to the northern part of South America. The decreasing dust emission trend over the 27-year period is highly correlated with W10m over the Sahara (R = 0.92). Over the Sahel, the dust emission is correlated with W10m (R = 0.69) but is also anti-correlated with the trend of NDVI (R = -0.65). W10m is decreasing over both the Sahara and the Sahel between 1982 and 2008, and the trends are correlated (R = 0.53), suggesting that Saharan/Sahelian surface winds are a coupled system, driving the inter-annual variation of dust emission.

  7. Hydrogen Implantation in Silicates: The role of solar wind in OH bond formation on the lunar surface

    Science.gov (United States)

    Schaible, Micah J; Baragiola, Raul

    2014-06-01

    Airless bodies in space such as the Moon, asteroids and interplanetary dust particles are subject to bombardment from energetic electrons and ions, ultraviolet photons, micrometeorites and cosmic rays. These bombarding particles modify optical, chemical and physical characteristics of the ices and minerals that make up these bodies in a process known as space weathering. In particular, solar wind protons implanted in silicate materials can participate in hydroxylation reactions with the oxygen to form OH. This mechanism has been suggested to explain a reported 3-14% absorption signal identified as OH on the surface of lunar soil grains and present in decreasing magnitude from polar to equatorial latitudes. With the goal of determining a precise OH formation rate due to H+ implantation in silicates, a series of experiments were carried out on terrestrial minerals as analogs to lunar and interstellar material.Experiments were carried out under UHV pressures (OH in thermally grown silicon oxide and San Carlos olivine, before and after irradiated with 1 - 5 keV H+ ions. The increase in Si-OH content due to irradiation was determined by subtracting the unirradiated spectra from the irradiated spectra. The implanted protons induced OH stretch absorptions in the mid-infrared peaked at 3673 cm-1 for SiO2 and 3570 cm-1 for olivine. The initial yield (OH formed per incident ion) was ~90% and the OH absorption band was found to saturate at implantation fluences of ~2x1017 H/cm2. Irradiation also modified the Si-O stretch band at ~1090 cm-1 (9.2 μm) causing an exponential decrease in the peak height with increasing fluence and the appearance of a silanol structure peaking at ~1030 cm-1. These measurements allow constraints to be placed on stellar wind contribution to observational and theoretical models of water on the lunar surface and on interstellar dust grains.

  8. Control of Surface Mounted Permanent Magnet Motors with Special Application to Fractional-Slot Concentrated Windings

    Energy Technology Data Exchange (ETDEWEB)

    Lawler, J.S.

    2005-12-21

    It is well known that the ability of the permanent magnet synchronous machine (PMSM) to operate over a wide constant power speed range (CPSR) is dependent upon the machine inductance [1,2,3,4,5]. Early approaches for extending CPSR operation included adding supplementary inductance in series with the motor [1] and the use of anti-parallel thyristor pairs in series with the motor-phase windings [5]. The increased inductance method is compatible with a voltage-source inverter (VSI) controlled by pulse-width modulation (PWM) which is called the conventional phase advance (CPA) method. The thyristor method has been called the dual mode inverter control (DMIC). Neither of these techniques has met with wide acceptance since they both add cost to the drive system and have not been shown to have an attractive cost/benefit ratio. Recently a method has been developed to use fractional-slot concentrated windings to significantly increase the machine inductance [6]. This latest approach has the potential to make the PMSM compatible with CPA without supplemental external inductance. If the performance of such drive is acceptable, then the method may make the PMSM an attractive option for traction applications requiring a wide CPSR. A 30 pole, 6 kW, 6000 maximum revolutions per minute (rpm) prototype of the fractional-slot PMSM design has been developed [7]. This machine has significantly more inductance than is typical of regular PMSMs. The prototype is to be delivered in late 2005 to the Oak Ridge National Laboratory (ORNL) for testing and development of a suitable controller. In advance of the test/control development effort, ORNL has used the PMSM models developed over a number of previous studies to study the steady-state performance of high-inductance PMSM machines with a view towards control issues. The detailed steady-state model developed includes all motor and inverter-loss mechanisms and will be useful in assessing the performance of the dynamic controller to be

  9. Impact of upper-level jet-generated inertia-gravity waves on surface wind and precipitation

    Directory of Open Access Journals (Sweden)

    C. Zülicke

    2007-11-01

    Full Text Available A meteorological case study for the impact of inertia-gravity waves on surface meteorology is presented. The large-scale environment from 17 to 19 December 1999 was dominated by a poleward breaking Rossby wave transporting subtropical air over the North Atlantic Ocean upward and north-eastward. The synoptic situation was characterized with an upper tropospheric jet streak passing Northern Europe. The unbalanced jet spontaneously radiated inertia-gravity waves from its exit region. Near-inertial waves appeared with a horizontal wavelength of about 200 km and an apparent period of about 12 h. These waves transported energy downwards and interacted with large-scale convection.

    This configuration is simulated with the nonhydrostatic Fifth-Generation Mesoscale Model. Together with simplified runs without orography and moisture it is demonstrated that the imbalance of the jet (detected with the cross-stream ageostrophic wind and the deep convection (quantified with the latent heat release are forcing inertia-gravity waves. This interaction is especially pronounced when the upper tropospheric jet is located above a cold front at the surface and supports deep frontal convection. Weak indication was found for triggering post-frontal convection by inertia-gravity waves.

    The realism of model simulations was studied in an extended validation study for the Baltic Sea region. It included observations from radar (DWDPI, BALTRAD, satellite (GFZGPS, weather stations (DWDMI and assimilated products (ELDAS, MESAN. The detected spatio-temporal patterns show wind pulsations and precipitation events at scales corresponding to those of inertia-gravity waves. In particular, the robust features of strong wind and enhanced precipitation near the front appeared with nearly the same amplitudes as in the model. In some datasets we found indication for periodic variations in the post-frontal region.

    These findings demonstrate the impact of upper

  10. Surface properties of the Pettit wind streak on Mars Implications for sediment transport

    Science.gov (United States)

    Zimbelman, J. R.

    1986-01-01

    Satellite imagery of the Pettit streak on Amazonis Planitia are discussed in terms of the details of wind streaks and their associated sediments. Increasingly more detailed blow-ups of the available imagery demonstrate that the Pettit streak holds both a Type I bright streak (at the crater rim) and a Type II dark streak beginning at the dark patch within the crater. The lowest albedos measured, 0.20-0.22, are associated with the highest thermal inertia, indicative of grain diameters similar to medium sand, i.e., ranging from 250-350 microns. The brightest portions of the streak have albedos over 0.26 and a low thermal inertia, in the range 3-4, which implies the presence of fine-grained sand, diameters from 50-100 microns. The particle grains are less than 50 microns diameter in the surrounding plains, which have an approximately uniform albedo (0.27) and a thermal inertia of 2.5, characteristics typical of silt or clay. Current streak models describe the dark streak well, but do not account for the bright streak, which may be optically thick patches of very fine dust.

  11. Unprecedented wind erosion and perturbation of surface geochemistry marks the Anthropocene in Australia

    Science.gov (United States)

    Marx, Samuel K.; McGowan, Hamish A.; Kamber, Balz S.; Knight, Jon M.; Denholm, John; Zawadzki, Atun

    2014-01-01

    the last continent to undergo industrial development, is an ideal environment in which to quantify the magnitude of human-induced environmental change during the Anthropocene because its entire agricultural and industrial history has occurred within this period. Analysis of an alpine peat mire showed that rapid industrial and agricultural development (both pastoral and cropping) over the past 200 years has resulted in significant environmental change in Australia. Beginning in the 1880s, rates of wind erosion and metal enrichment were up to 10 and 30 times that of background natural conditions, respectively. Increased dust deposition and an expansion in dust source areas were found to map the progression of European farming across the continent, while dust deposition pulses in the mire matched known land degradation events. After 1990 dust deposition decreased, returning to pre-1880 rates. This was attributed to three factors: net soil loss following more than a century of agricultural activity, increased environmental awareness and soil conservation, and changing windiness. Metal enrichment in the mire reached approximately 2 times natural background accumulation rates by the 1980s as Australia's mining industry expanded. However, metal enrichment continued to increase after the 1980s reaching an average of ~5 times background rates by 2006 and reflecting increased mineral resource development in Australia. Collectively, the results show that changes to Australia's geochemical and sedimentary systems, as a result of agricultural and industrial development, have profoundly changed the Australian environment during the past two centuries.

  12. Seasonal Cycle of the Near-Surface Diurnal Wind Field Over the Bay of La Paz, Mexico

    Science.gov (United States)

    Turrent, Cuauhtémoc; Zaitsev, Oleg

    2014-05-01

    The results of numerical simulations of the troposphere over the Bay of La Paz, calculated for the months of January, April, July and October during the period 2006-2010 with the Weather Research and Forecast (WRF v3.5) regional model, are used to describe the seasonal features of the diurnal cycle of planetary boundary-layer winds. Two distinct near-surface diurnal flows with strong seasonal variability were identified: (1) a nocturnal and matutinal breeze directed from the subtropical Pacific Ocean, over the Baja California peninsula and the Bay of La Paz, into the Gulf of California that is associated with the regional sea-surface temperature difference between those two major water bodies; and (2) a mid to late afternoon onshore sea-breeze related to the peninsula's daily cycle of insolation heating that evolves with counter-clockwise rotation over the Bay of La Paz. The model results reveal the interaction over Baja California of opposing afternoon sea-breeze fronts that originate from the subtropical Pacific Ocean and the Gulf of California, with a convergence line forming over the peaks of the peninsula's topography and the associated presence of a closed vertical circulation cell over the Bay of La Paz and the adjacent Gulf. The collision of the opposing sea-breeze fronts over the narrow peninsula drives convection that is relatively weak due to the reduced heat source and only appears to produce precipitation sporadically. The spatial structure of the sea-breeze fronts over the Bay of La Paz region is complex due to shoreline curvature and nearby topographic features. A comparison of the numerical results with available meteorological near-surface observations indicates that the modelling methodology adequately reproduced the observed features of the seasonal variability of the local planetary boundary-layer diurnal wind cycle and confirms that the low-level atmospheric circulation over the Bay of La Paz is dominated by kinetic energy in the diurnal band

  13. Delayed baroclinic response of the Antarctic circumpolar current to surface wind stress

    Institute of Scientific and Technical Information of China (English)

    YANG XiaoYi; HUANG RuiXin; WANG Jia; WANG DongXiao

    2008-01-01

    The Antarctic Circumpolar Current (ACC) responds to the surface windstress via two processes,i.e.,the instant barotropic process and the delayed baroclinic process. This study focuses on the baroclinic instability mechanism in ACC,which was less reported in the literatures. Results show that the strengthening of surface zonal windstress causes the enhanced tilting of the isopycnal surface,leading to more intense baroclinic instability. Simultaneously,the mesoscale eddies resulting from the baroclinic instability facilitate the transformation of mean potential energy to eddy energy,which causes the remarkable decrease of the ACC volume transport with the 2-year lag time. This delayed negative correlation between the ACC transport and the zonal windstress may account for the steadiness of the ACC transport during last two decades.

  14. Delayed baroclinic response of the Antarctic circum-polar current to surface wind stress

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The Antarctic Circumpolar Current (ACC) responds to the surface windstress via two processes, i.e., the instant barotropic process and the delayed baroclinic process. This study focuses on the baroclinic instability mechanism in ACC, which was less reported in the literatures. Results show that the strengthening of surface zonal windstress causes the enhanced tilting of the isopycnal surface, leading to more intense baroclinic instability. Simultaneously, the mesoscale eddies resulting from the baro- clinic instability facilitate the transformation of mean potential energy to eddy energy, which causes the remarkable decrease of the ACC volume transport with the 2-year lag time. This delayed negative cor- relation between the ACC transport and the zonal windstress may account for the steadiness of the ACC transport during last two decades.

  15. Upper Meter Processes: Short Wind Waves, Surface Flow, and Micro-Turbulence

    Science.gov (United States)

    1998-01-01

    shading techniques for moving specular surfaces, Computer Vision (ECCV󈨦), Proc. Vol. II, H. Burkhardt and B. Neumann (eds.), Lecture Notes in Computer Science 1407...tensor-based spatiotemporal image processing techniques, Computer Vision (ECCV󈨦), Proc. Vol. II, H. Burkhardt and B. Neumann (eds.), Lecture Notes in Computer Science 1407

  16. Observations and Modelling of Winds and Waves During the Surface Wave Dynamics Experiment

    Science.gov (United States)

    1994-03-01

    l’Environnement Terrestre et Planitalre (CRPE), France; Dr. Will M. Drennan, National Water Research Institute, CCIW; Dr. Lynn "Nick" K. Shay, RSMAS; Dr...250 m), and the orbital velocities of the low-frequency surface wave components. A summary of the results from SWADE are described in Shay (1993). 18

  17. Numerical Simulation and Wind Tunnel Experiment of Wind Field over Slope Surface%坡面地表下的风场的风洞实验与数值模拟

    Institute of Scientific and Technical Information of China (English)

    蒋红; 佟鼎; 黄宁

    2011-01-01

    Current theoretical studies and numerical simulations of windblown sand movement concentrate on ideal circumstances, such as steady wind velocity, flat sand surface, etc. However, the environment of windblown sand movement is complex in natural environments, such as complex landform, turbulence structure of wind flow. Actually the gradient of the windward slope of the sand dune and the sand ripple etc. Which are the basic form of the desert landscape, have great influence on the initiation and transportation of and particles. In this paper, wind tunnel experiments are carried out and the wind velocity over slope surace is measured by using the Phase Doppler Particle Analyzer technique and the characteristics of wind flow it the windward slope and at the leeward slope are analyzed. Then the SIMPLE algorithm is applied to calculate the wind flow over the slope, and the numerical simulation results are compared with the experiment results. The results show that the numerical model can not only simulate the wind flow characteristics of the slope surface effectively, but also displays the wind field structures of windward slope and leeward slope intuitively and comprehensively.%针对传统近地层风沙流的理论与数值模拟研究以及风洞实验大多是基于理想条件(平坦床面、定常风速),而实际风沙运动通常发生在复杂环境下(如复杂地形、湍流结构风场等),沙漠最基本的地貌形态如沙丘、沙波纹等迎风面坡度对颗粒起动和输沙率影响很大.基于此,应用相位多普勒粒子分析仪(PDPA)对坡面近地表风场进行测量,得到迎风坡及背风坡的风场特性,并且采用SIMPLE算法对坡面风场进行了数值模拟.通过对数值模拟及风洞实验结果进行对比分析后,发现数值模型不仅能够有效地模拟风洞实验中坡面地表的风场特性,而且能够较为直观全面的展现迎风坡面、特别是背风坡面的风场结构特性.

  18. A Case Study of Land-Surface-Temperature Impact from Large-Scale Deployment of Wind Farms in China from Guazhou

    Directory of Open Access Journals (Sweden)

    Rui Chang

    2016-09-01

    Full Text Available The wind industry in China has experienced a rapid expansion of capacity after 2009, especially in northwestern China, where the China’s first 10 GW-level wind power project is located. Based on the analysis from Moderate Resolution Imaging Spectroradiometer (MODIS land surface temperature (LST data for period of 2005–2012, the potential LST impacts from the large-scale wind farms in northwestern China’s Guazhou are investigated in this paper. It shows the noticeable nighttime warming trends on LST over the wind farm areas relative to the nearby non-wind-farm regions in Guazhou and that the nighttime LST warming is strongest in summer (0.51 °C/8 years, followed by autumn (0.48 °C/8 years and weakest in winter (0.38 °C/8 years with no warming trend observed in spring. Meanwhile, the quantitative comparison results firstly indicate that the nighttime LST warming from wind farm areas are less than those from the urban areas in this work.

  19. Ocean surface waves and winds over the north Indian Ocean from satellite altimeter - preliminary results of SAC-NIO joint project

    Digital Repository Service at National Institute of Oceanography (India)

    Sarkar, A.; Rajkumar, R.; Gairola, R.M.; Gohil, B.S.; Vethamony, P.; Rao, L.V.G.

    and NIO. Though there had been three cruises during the period, there were very few satellite-ship overlaps. Data pairs (satellite derived and in situ) of surface wind speed, significant wave height and minimum significant swell height were used to find...

  20. Wind-tunnel experiments of turbulent flow over a surface-mounted 2-D block in a thermally-stratified boundary layer

    Science.gov (United States)

    Zhang, Wei; Markfort, Corey; Porté-Agel, Fernando

    2014-11-01

    Turbulent flows over complex surface topography have been of great interest in the atmospheric science and wind engineering communities. The geometry of the topography, surface roughness and temperature characteristics as well as the atmospheric thermal stability play important roles in determining momentum and scalar flux distribution. Studies of turbulent flow over simplified topography models, under neutrally stratified boundary-layer conditions, have provided insights into fluid dynamics. However, atmospheric thermal stability has rarely been considered in laboratory experiments, e.g., wind-tunnel experiments. Series of wind-tunnel experiments of thermally-stratified boundary-layer flow over a surface-mounted 2-D block, in a well-controlled boundary-layer wind tunnel, will be presented. Measurements using high-resolution PIV, x-wire/cold-wire anemometry and surface heat flux sensors were conducted to quantify the turbulent flow properties, including the size of the recirculation zone, coherent vortex structures and the subsequent boundary layer recovery. Results will be shown to address thermal stability effects on momentum and scalar flux distribution in the wake, as well as dominant mechanism of turbulent kinetic energy generation and consumption. The authors gratefully acknowledge funding from the Swiss National Foundation (Grant 200021-132122), the National Science Foundation (Grant ATM-0854766) and NASA (Grant NNG06GE256).

  1. Trends in surface wind speed and significant wave height as revealed by ERA-Interim wind wave hindcast in the Central Bay of Bengal

    Digital Repository Service at National Institute of Oceanography (India)

    Shanas, P.R.; SanilKumar, V.

    The Arabian Sea and Bay of Bengal (BoB) regions are special interested sea areas in the Northern Hemisphere with large seasonal variability. This study focused on the long-term wind and wave in the central BoB from 1979 to 2012 based on the ECMWF...

  2. Self-Sealing Shells: Blowouts and Blisters on the Surfaces of Leaky Wind-Blown-Bubbles and Supernova Remnants

    CERN Document Server

    Pittard, Julian

    2013-01-01

    Blowouts can occur when a dense shell confining hot, high pressure, gas ruptures. The venting gas inflates a blister on the surface of the shell. Here we examine the growth of such blisters on the surfaces of wind-blown-bubbles (WBBs) and supernova remnants (SNRs) due to shell rupture caused by the Vishniac instability. On WBBs the maximum relative size of the blister (R_bstall/R) is found to grow linearly with time, but in many cases the blister radius will not exceed 20 per cent of the bubble radius. Thus blowouts initiated by the Vishniac instability are unlikely to have a major effect on the global dynamics and properties of the bubble. The relative size of blisters on SNRs is even smaller than on WBBs, with blisters only growing to a radius comparable to the thickness of the cold shell of SNRs. The small size of the SNR blowouts is, however, in good agreement with observations of blisters in the Vela SNR. The difference in relative size between WBB and SNR blisters is due to the much higher speed at whic...

  3. Evaluation of representativeness of near-surface winds in station measurements, global and regional reanalysis for Germany

    Science.gov (United States)

    Kaspar, Frank; Kaiser-Weiss, Andrea K.; Heene, Vera; Borsche, Michael; Keller, Jan

    2015-04-01

    Within the preparation activities for a European COPERNICUS Climate Change Service (C3S) several ongoing research projects analyse the potential of global and regional model-based climate reanalyses for applications. A user survey in the FP7-project CORE-CLIMAX revealed that surface wind (10 m) is among the most frequently used parameters of global reanalysis products. The FP7 project UERRA (Uncertainties in Ensembles of Regional Re-Analysis) has the focus on regional European reanalysis and the associated uncertainties, also from a user perspective. Especially in the field of renewable energy planning and production there is a need for climatological information across all spatial scales, i.e., from climatology at a certain site to the spatial scale of national or continental renewable energy production. Here, we focus on a comparison of wind measurements of the Germany's meteorological service (Deutscher Wetterdienst, DWD) with global reanalyses of ECWMF and a regional reanalysis for Europe based on DWD's NWP-model COSMO (performed by the Hans-Ertel-Center for Weather Research, University of Bonn). Reanalyses can provide valuable additional information on larger scale variability, e.g. multi-annual variation over Germany. However, changes in the observing system, model errors and biases have to be carefully considered. On the other hand, the ground-based observation networks partly suffer from change of the station distribution, changes in instrumentation, measurements procedures and quality control as well as local changes which might modify their spatial representativeness. All these effects might often been unknown or hard to characterize, although plenty of the meta-data information has been recorded for the German stations. One focus of the presentation will be the added-value of the regional reanalysis.

  4. The effect of wind-generated bubbles on sea-surface backscattering at 940 Hz.

    Science.gov (United States)

    van Vossen, Robbert; Ainslie, Michael A

    2011-11-01

    Reliable predictions of sea-surface backscattering strength are required for sonar performance modeling. These are, however, difficult to obtain as measurements of sea-surface backscattering are not available at small grazing angles relevant to low-frequency active sonar (1-3 kHz). Accurate theoretical predictions of scattering strength require a good understanding of physical mechanisms giving rise to the scattering and the relative importance of these. In this paper, scattering from individual resonant bubbles is introduced as a potential mechanism and a scattering model is derived that incorporates the contribution from these together with that of rough surface scattering. The model results are fitted to Critical Sea Test (CST) measurements at a frequency of 940 Hz, treating the number of large bubbles, parameterized through the spectral slope of the size spectrum for bubbles whose radii exceed 1 mm, as a free parameter. This procedure illustrates that the CST data can be explained by scattering from a small number of large resonant bubbles, indicating that these provide an alternative mechanism to that of scattering from bubble clouds.

  5. Wind speed forecasting for wind energy applications

    Science.gov (United States)

    Liu, Hong

    With more wind energy being integrated into our grid systems, forecasting wind energy has become a necessity for all market participants. Recognizing the market demands, a physical approach to site-specific hub-height wind speed forecasting system has been developed. This system is driven by the outputs from the Canadian Global Environmental Multiscale (GEM) model. A simple interpolation approach benchmarks the forecasting accuracy inherited from GEM. Local, site specific winds are affected on a local scale by a variety of factors including representation of the land surface and local boundary-layer process over heterogeneous terrain which have been a continuing challenge in NWP models like GEM with typical horizontal resolution of order 15-km. In order to resolve these small scale effects, a wind energy industry standard model, WAsP, is coupled with GEM to improve the forecast. Coupling the WAsP model with GEM improves the overall forecasts, but remains unsatisfactory for forecasting winds with abrupt surface condition changes. Subsequently in this study, a new coupler that uses a 2-D RANS model of boundary-layer flow over surface condition changes with improved physics has been developed to further improve the forecasts when winds coming from a water surface to land experience abrupt changes in surface conditions. It has been demonstrated that using vertically averaged wind speeds to represent geostrophic winds for input into the micro-scale models could reduce forecast errors. The hub-height wind speed forecasts could be further improved using a linear MOS approach. The forecasting system has been evaluated, using a wind energy standard evaluation matrix, against data from an 80-m mast located near the north shore of Lake Erie. Coupling with GEM-LAM and a power conversion model using a theoretical power curve have also been investigated. For hub-height wind speeds GEM appears to perform better with a 15-Ian grid than the high resolution GEM-2.5Ian version at the

  6. A climatology of Brazilian surface wind speed trends using in-situ and climate reanalysis datasets from 1980-2014

    Science.gov (United States)

    Gilliland, J. M.; Keim, B. D.

    2015-12-01

    Wind speed trends have been extensively researched for the Northern Hemisphere and Australia. The general consensus among scientists is that wind speeds have declined over the past century. However, a minimal amount of research has focused on understanding how wind speeds changed across Brazil based on temporal and geographical perspectives. Therefore, this study provides a climatological assessment of wind speed trends across Brazil using in-situ and climatic model datasets from 1980-2014. Seasonal and annual trends are determined across the study area using linear and quantile regression. Geographical Information Systems is used to interpret and understand how wind speed trends have changed across Brazil. Preliminary results show two distinct wind speed trend patterns exist across Brazil. The largest wind speed magnitude increases occurred along northeastern and coastal Brazil, where as decreasing wind speeds have been observed for central and southeastern Brazil. Furthermore, quantile regression also shows the largest seasonal and annual wind trend fluctuations occur at lower (5%) and upper percentiles (95%) for both in-situ and climate model datasets. As a result, these findings indicate possible alterations in atmospheric and oceanic circulations could be affecting wind speed trends across Brazil and warrants further investigation and research.

  7. Statistical characterization of short wind waves from stereo images of the sea surface

    Science.gov (United States)

    Mironov, Alexey; Yurovskaya, Maria; Dulov, Vladimir; Hauser, Danièle; Guérin, Charles-Antoine

    2013-04-01

    We propose a methodology to extract short-scale statistical characteristics of the sea surface topography by means of stereo image reconstruction. The possibilities and limitations of the technique are discussed and tested on a data set acquired from an oceanographic platform at the Black Sea. The analysis shows that reconstruction of the topography based on stereo method is an efficient way to derive non-trivial statistical properties of surface short- and intermediate-waves (say from 1 centimer to 1 meter). Most technical issues pertaining to this type of datasets (limited range of scales, lacunarity of data or irregular sampling) can be partially overcome by appropriate processing of the available points. The proposed technique also allows one to avoid linear interpolation which dramatically corrupts properties of retrieved surfaces. The processing technique imposes that the field of elevation be polynomially detrended, which has the effect of filtering out the large scales. Hence the statistical analysis can only address the small-scale components of the sea surface. The precise cut-off wavelength, which is approximatively half the patch size, can be obtained by applying a high-pass frequency filter on the reference gauge time records. The results obtained for the one- and two-points statistics of small-scale elevations are shown consistent, at least in order of magnitude, with the corresponding gauge measurements as well as other experimental measurements available in the literature. The calculation of the structure functions provides a powerful tool to investigate spectral and statistical properties of the field of elevations. Experimental parametrization of the third-order structure function, the so-called skewness function, is one of the most important and original outcomes of this study. This function is of primary importance in analytical scattering models from the sea surface and was up to now unavailable in field conditions. Due to the lack of precise

  8. Applications of AMSR-E Measurements for Tropical Cyclone Predictions Part Ⅰ: Retrieval of Sea Surface Temperature and Wind Speed

    Institute of Scientific and Technical Information of China (English)

    Banghua YAN; Fuzhong WENG

    2008-01-01

    Existing satellite microwave algorithms for retrieving Sea Surface Temperature(Sst)and wind(SSW)are applicable primarily for non-raining cloudy conditions.With the launch of the Earth Observing System (EOS)Aqua satellite in 2002,the Advanced Microwave Scanning Radiometer(AMSR-E)onboard provides some unique measurements at lower frequencies which are sensitive to ocean surface parameters under ad-verse weather conditions.In this study,a new algorithm is developed to derive SST and SSW for hurricane predictions such as hurricane vortex analysis from the AMSR-E measurements at 6.925 and 10.65 GHz.In the algorithm,the effects of precipitation emission and scattering on the measurements are properly taken into account.The algorithm performances are evaluated with buoy measurements and aircraft dropsonde data.It is found that the root mean square (RMS) errors for SST and SSW are about 1.8K and 1.9m s(-1),respectively,when the results are compared with the buoy data over open oceans under precipitating clouds (e.g.,its liquid water path is larger than 0.5 mm),while they are 1.1 K for SST and 2.0 ms(-1)for SSW,respectively,when the retrievals are validated against the dropsonde measurements over warm oceans.These results indicate that our newly developed algorithm catl provide some critical surface information for trop-ical cycle predictions.Currently,this newly developed algorithm has been implemented into the hybrid variational scheme for the hurricane vortex analysis to provide predictions of SST and SSW fields.

  9. Coastal sea-surface temperature anomalies during the 2014-2016 northeast Pacific marine heat wave: regional variability, timing, and relation to wind stress anomalies

    Science.gov (United States)

    Gentemann, C. L.; Fewings, M. R.; Garcia-Reyes, M.

    2016-12-01

    In 2014-2016, sea-surface temperatures (SSTs) in the region along the Washington, Oregon, and California coasts were significantly warmer than usual, with a maximum SST anomaly of 6.2°C measured near Santa Barbara. This marine heat wave was associated with major ecosystem disturbances, including a toxic algae bloom of Pseudo-nitzschia that had massive economic and ecological impacts. Here, we use satellite and blended reanalysis products to report the magnitude, extent, duration, and evolution of SST, wind stress, and wind stress curl anomalies along the west coast of the continental United States during 2014-2016. Using high-resolution wind stress instead of the Bakun upwelling index shows clear differences in upwelling phenology in 2015.

  10. Analysis of the horizontal two-dimensional near-surface structure of a winter tornadic vortex using high-resolution in situ wind and pressure measurements

    Science.gov (United States)

    Kato, Ryohei; Kusunoki, Kenichi; Sato, Eiichi; Mashiko, Wataru; Inoue, Hanako Y.; Fujiwara, Chusei; Arai, Ken-ichiro; Nishihashi, Masahide; Saito, Sadao; Hayashi, Syugo; Suzuki, Hiroto

    2015-06-01

    The horizontal two-dimensional near-surface structure of a tornadic vortex within a winter storm was analyzed. The tornadic vortex was observed on 10 December 2012 by the high-resolution in situ observational linear array of wind and pressure sensors (LAWPS) system in conjunction with a high-resolution Doppler radar. The 0.1 s maximum wind speed and pressure deficit near the ground were recorded as 35.3 m s-1 and -3.8 hPa, respectively. The horizontal two-dimensional distributions of the tornadic vortex wind and pressure were retrieved by the LAWPS data, which provided unprecedented observational detail on the following important features of the near-surface structure of the tornadic vortex. Asymmetric convergent inflow toward the vortex center existed. Total wind speed was strong to the right and rear side of the translational direction of the vortex and weak in the forward part of the vortex possibly because of the strong convergent inflow in that region. The tangential wind speed profile of the vortex was better approximated using a modified Rankine vortex rather than the Rankine vortex both at 5 m above ground level (agl) and 100 m agl, and other vortex models (Burgers-Rott vortex and Wood-White vortex) were also compared. The cyclostrophic wind balance was violated in the core radius R0 and outside the core radius in the forward sector; however, it was held with a relatively high accuracy of approximately 14% outside the core of the vortex in the rearward sector (from 2 R0 to 5 R0) near the ground.

  11. Gap Filling of the CALYPSO HF Radar Sea Surface Current Data through Past Measurements and Satellite Wind Observations

    Directory of Open Access Journals (Sweden)

    Adam Gauci

    2016-01-01

    Full Text Available High frequency (HF radar installations are becoming essential components of operational real-time marine monitoring systems. The underlying technology is being further enhanced to fully exploit the potential of mapping sea surface currents and wave fields over wide areas with high spatial and temporal resolution, even in adverse meteo-marine conditions. Data applications are opening to many different sectors, reaching out beyond research and monitoring, targeting downstream services in support to key national and regional stakeholders. In the CALYPSO project, the HF radar system composed of CODAR SeaSonde stations installed in the Malta Channel is specifically serving to assist in the response against marine oil spills and to support search and rescue at sea. One key drawback concerns the sporadic inconsistency in the spatial coverage of radar data which is dictated by the sea state as well as by interference from unknown sources that may be competing with transmissions in the same frequency band. This work investigates the use of Machine Learning techniques to fill in missing data in a high resolution grid. Past radar data and wind vectors obtained from satellites are used to predict missing information and provide a more consistent dataset.

  12. Russian wind atlas

    Energy Technology Data Exchange (ETDEWEB)

    Starkov, A.N.; Bezroukikh, P.P.; Borisenko, M.M. (Russian Danish Institute of Energy Efficiency (RDIEE), Moscow (RU)); Landberg, L. (Risoe National Lab., Roskilde (DK))

    2000-07-01

    The Atlas provides the assessment of wind energy potential in the near-surface 200 metres of the atmospheric boundary layer. It is based on numerical modeling of wind flows according to hydrodynamic laws and takes into account the effects of roughness, orography and sheltering. The primary information is derived from long-term data series from 332 meteorological stations in Russia. The regional climatologies are calculated in the Atlas for five standard heights (10, 30, 50, 100, 200 m) and four roughness classes of flat and homogeneous terrain. Besides, the Atlas provides the maps of wind energy potential in Russia at 50 metres above ground level, the most important height for wind energy applications. The maps show mean wind speeds and mean wind power densities for any region and any of the five basic types of landscape. The Atlas gives recommendations and examples of wind energy resource assessment and siting of wind turbines. (LN)

  13. Effects of glacier runoff and wind on surface layer dynamics and Atlantic Water exchange in Kongsfjorden, Svalbard; a model study

    Science.gov (United States)

    Sundfjord, A.; Albretsen, J.; Kasajima, Y.; Skogseth, R.; Kohler, J.; Nuth, C.; Skarðhamar, J.; Cottier, F.; Nilsen, F.; Asplin, L.; Gerland, S.; Torsvik, T.

    2017-03-01

    A high resolution numerical ocean circulation model has been used to investigate exchange mechanisms and transport of thermal energy towards the inner part of Kongsfjorden, Svalbard; a location where tidewater glaciers expose large calving fronts to the ocean water and sea ice has been a regular winter feature until recently. Comparison of model simulations against a large set of observational data shows that the model captures the main features of seasonality and geographical distribution of hydrography. The model is able to simulate inflow of Atlantic Water although the timing, strength and depth of inflow events are not always the same in the model as in mooring records. The model shows water entering via the shelf consistently penetrating deep into the fjord, and volume transport toward the interior parts are large even under winter conditions. Heat transports are smaller in winter than in summer due to generally lower winter temperatures. Results indicate that glacial freshwater discharge in the surface layer is not a necessary factor for driving sub-surface exchange; rather, along-fjord winds stand out as important for the circulation and hence water exchange in the inner part of the fjord. The combination of inflow of Atlantic Water from the outer shelf into the central part of the fjord, and further transport of mixed water masses with intermediate heat content toward the inner part, constitutes a significant transfer of thermal energy from the outer shelf and deep into the fjord. The potential for glacier front melting is larger in summer than in winter as heat transports are larger this time of year, while even modest heat transports in the upper part of the water column may influence the sea ice cover in winter.

  14. Summertime wind climate in Yerevan: valley wind systems

    Science.gov (United States)

    Gevorgyan, Artur

    2017-03-01

    1992-2014 wind climatology analysis in Yerevan is presented with particular focus given to the summertime thermally induced valley wind systems. Persistence high winds are observed in Yerevan during July-August months when the study region is strongly affected by a heat-driven plain-plateau circulation. The local valley winds arrive in Yerevan in the evening hours, generally, from 1500 to 1800 UTC, leading to rapid enhancement of wind speeds and dramatic changes in wind direction. Valley-winds significantly impact the local climate of Yerevan, which is a densely populated city. These winds moderate evening temperatures after hot and dry weather conditions observed during summertime afternoons. On the other hand, valley winds result in significantly higher nocturnal temperatures and more frequent occurrence of warm nights (tn90p) in Yerevan due to stronger turbulent mixing of boundary layer preventing strong surface cooling and temperature drop in nighttime and morning hours. The applied WRF-ARW limited area model is able to simulate the key features of the observed spatial pattern of surface winds in Armenia associated with significant terrain channeling, wind curls, etc. By contrast, ECMWF EPS global model fails to capture mesoscale and local wind systems over Armenia. However, the results of statistical verification of surface winds in Yerevan showed that substantial biases are present in WRF 18-h wind forecasts, as well as, the temporal variability of observed surface winds is not reproduced adequately in WRF-ARW model.

  15. On structural similarity in wall turbulence organization under weak thermal effects: from the wind tunnel to the atmospheric surface layer (Invited)

    Science.gov (United States)

    Guala, M.

    2013-12-01

    Reproducing the different thermal stability regimes of the atmospheric boundary layer (ABL) in wind tunnel experiments requires accurate control of the free stream air and wall temperatures and a test section long enough to ensure the establishment of fully developed conditions. Such requirements are met in the SAFL atmospheric wind tunnel, with some limitations on the achievable range of z/L, confined between the weakly stratified and weakly convective boundary layers. A number of statistical checks based on Reynolds, Monin-Obukhov similarities, Kolmogorov small scale universality, temperature and velocity variance balance equations, are available to assess the quality of the measurements, flow and estimate of the scaling parameters. However, limited work has been devoted to the comparison of the spatio-temporal structure of turbulent flows from the laboratory to the field scale. Specifically, the vertical extent, scaling and statistical relevance of different structural types pose some scalability issues and deserve further investigation. PIV and triple wire measurements from the SAFL Wind Tunnel will be presented and compared with measurements in the atmospheric surface layer. Particular care is devoted to the contributions of large and very-large scale motions to the momentum and heat fluxes, and to their role in near-surface processes and wind energy.

  16. Coupling of WRF meteorological model to WAM spectral wave model through sea surface roughness at the Balearic Sea: impact on wind and wave forecasts

    Science.gov (United States)

    Tolosana-Delgado, R.; Soret, A.; Jorba, O.; Baldasano, J. M.; Sánchez-Arcilla, A.

    2012-04-01

    Meteorological models, like WRF, usually describe the earth surface characteristics by tables that are function of land-use. The roughness length (z0) is an example of such approach. However, over sea z0 is modeled by the Charnock (1955) relation, linking the surface friction velocity u*2 with the roughness length z0 of turbulent air flow, z0 = α-u2* g The Charnock coefficient α may be considered a measure of roughness. For the sea surface, WRF considers a constant roughness α = 0.0185. However, there is evidence that sea surface roughness should depend on wave energy (Donelan, 1982). Spectral wave models like WAM, model the evolution and propagation of wave energy as a function of wind, and include a richer sea surface roughness description. Coupling WRF and WAM is thus a common way to improve the sea surface roughness description of WRF. WAM is a third generation wave model, solving the equation of advection of wave energy subject to input/output terms of: wind growth, energy dissipation and resonant non-linear wave-wave interactions. Third generation models work on the spectral domain. WAM considers the Charnock coefficient α a complex yet known function of the total wind input term, which depends on the wind velocity and on the Charnock coefficient again. This is solved iteratively (Janssen et al., 1990). Coupling of meteorological and wave models through a common Charnock coefficient is operationally done in medium-range met forecasting systems (e.g., at ECMWF) though the impact of coupling for smaller domains is not yet clearly assessed (Warner et al, 2010). It is unclear to which extent the additional effort of coupling improves the local wind and wave fields, in comparison to the effects of other factors, like e.g. a better bathymetry and relief resolution, or a better circulation information which might have its influence on local-scale meteorological processes (local wind jets, local convection, daily marine wind regimes, etc.). This work, within the

  17. Extreme wind estimate for Hornsea wind farm

    DEFF Research Database (Denmark)

    Larsén, Xiaoli Guo

    The purpose of this study is to provide estimation of the 50-year winds of 10 min and 1-s gust value at hub height of 100 m, as well as the design parameter shear exponent for the Hornsea offshore wind farm. The turbulence intensity required for estimating the gust value is estimated using two...... approaches. One is through the measurements from the wind Doppler lidar, WindCube, which implies serious uncertainty, and the other one is through similarity theory for the atmospheric surface layer where the hub height is likely to belong to during strong storms. The turbulence intensity for storm wind...... strength is taken as 0.1. The shear exponents at several heights were calculated from the measurements. The values at 100 m are less than the limit given by IEC standard for all sectors. The 50-year winds have been calculated from various global reanalysis and analysis products as well as mesoscale models...

  18. Hurricane Imaging Radiometer (HIRAD) Observations of Brightness Temperatures and Ocean Surface Wind Speed and Rain Rate During NASA's GRIP and HS3 Campaigns

    Science.gov (United States)

    Miller, Timothy L.; James, M. W.; Roberts, J. B.; Jones, W. L.; Biswas, S.; Ruf, C. S.; Uhlhorn, E. W.; Atlas, R.; Black, P.; Albers, C.

    2012-01-01

    HIRAD flew on high-altitude aircraft over Earl and Karl during NASA s GRIP (Genesis and Rapid Intensification Processes) campaign in August - September of 2010, and plans to fly over Atlantic tropical cyclones in September of 2012 as part of the Hurricane and Severe Storm Sentinel (HS3) mission. HIRAD is a new C-band radiometer using a synthetic thinned array radiometer (STAR) technology to obtain spatial resolution of approximately 2 km, out to roughly 30 km each side of nadir. By obtaining measurements of emissions at 4, 5, 6, and 6.6 GHz, observations of ocean surface wind speed and rain rate can be retrieved. The physical retrieval technique has been used for many years by precursor instruments, including the Stepped Frequency Microwave Radiometer (SFMR), which has been flying on the NOAA and USAF hurricane reconnaissance aircraft for several years to obtain observations within a single footprint at nadir angle. Results from the flights during the GRIP and HS3 campaigns will be shown, including images of brightness temperatures, wind speed, and rain rate. Comparisons will be made with observations from other instruments on the campaigns, for which HIRAD observations are either directly comparable or are complementary. Features such as storm eye and eye-wall, location of storm wind and rain maxima, and indications of dynamical features such as the merging of a weaker outer wind/rain maximum with the main vortex may be seen in the data. Potential impacts on operational ocean surface wind analyses and on numerical weather forecasts will also be discussed.

  19. The effect of limited spatial resolution of stellar surface magnetic field maps on MHD wind and coronal X-ray emission models

    CERN Document Server

    Garraffo, C; Drake, J J; Downs, C

    2012-01-01

    We study the influence of the spatial resolution on scales of $5\\deg$ and smaller of solar surface magnetic field maps on global magnetohydrodynamic solar wind models, and on a model of coronal heating and X-ray emission. We compare the solutions driven by a low-resolution Wilcox Solar Observatory magnetic map, the same map with spatial resolution artificially increased by a refinement algorithm, and a high-resolution Solar and Heliospheric Observatory Michelson Doppler Imager map. We find that both the wind structure and the X-ray morphology are affected by the fine-scale surface magnetic structure. Moreover, the X-ray morphology is dominated by the closed loop structure between mixed polarities on smaller scales and shows significant changes between high and low resolution maps. We conclude that three-dimensional modeling of coronal X-ray emission has greater surface magnetic field spatial resolution requirements than wind modeling, and can be unreliable unless the dominant mixed polarity magnetic flux is p...

  20. The Use of MTM-SVD Technique to Explore the Joint Spatiotemporal Modes of Wind and Sea Surface Variability in the North Indian Ocean during 1993–2005

    Directory of Open Access Journals (Sweden)

    Thaned Rojsiraphisal

    2009-01-01

    Full Text Available Sea surface height (SSH and sea surface temperature (SST in the North Indian Ocean are affected predominantly by the seasonally reversing monsoons and in turn feed back on monsoon variability. In this study, a set of data generated from a data-assimilative ocean model is used to examine coherent spatiotemporal modes of variability of winds and surface parameters using a frequency domain technique, Multiple Taper Method with Singular Value Decomposition (MTM-SVD. The analysis shows significant variability at annual and semiannual frequencies in these fields individually and jointly. The joint variability of winds and SSH is significant at interannual (2-3 years timescale related to the ENSO mode—with a “/dipole/” like spatial pattern. Joint variability with SST showed similar but somewhat weaker behavior. Winds appear to be the driver of variability in both SSH and SST at these frequency bands. This offers prospects for long-lead projections of the North Indian Ocean climate.

  1. NOAA high resolution sea surface winds data from Synthetic Aperture Radar (SAR) on the RADARSAT-2 satellite

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Synthetic Aperture Radar (SAR)-derived high resolution wind products are calculated from high resolution SAR images of normalized radar cross section (NRCS) of the...

  2. A modulating effect of Tropical Instability Wave (TIW)-induced surface wind feedback in a hybrid coupled model of the tropical Pacific

    Science.gov (United States)

    Zhang, Rong-Hua

    2016-10-01

    Tropical Instability Waves (TIWs) and the El Niño-Southern Oscillation (ENSO) are two air-sea coupling phenomena that are prominent in the tropical Pacific, occurring at vastly different space-time scales. It has been challenging to adequately represent both of these processes within a large-scale coupled climate model, which has led to a poor understanding of the interactions between TIW-induced feedback and ENSO. In this study, a novel modeling system was developed that allows representation of TIW-scale air-sea coupling and its interaction with ENSO. Satellite data were first used to derive an empirical model for TIW-induced sea surface wind stress perturbations (τTIW). The model was then embedded in a basin-wide hybrid-coupled model (HCM) of the tropical Pacific. Because τTIW were internally determined from TIW-scale sea surface temperatures (SSTTIW) simulated in the ocean model, the wind-SST coupling at TIW scales was interactively represented within the large-scale coupled model. Because the τTIW-SSTTIW coupling part of the model can be turned on or off in the HCM simulations, the related TIW wind feedback effects can be isolated and examined in a straightforward way. Then, the TIW-scale wind feedback effects on the large-scale mean ocean state and interannual variability in the tropical Pacific were investigated based on this embedded system. The interactively represented TIW-scale wind forcing exerted an asymmetric influence on SSTs in the HCM, characterized by a mean-state cooling and by a positive feedback on interannual variability, acting to enhance ENSO amplitude. Roughly speaking, the feedback tends to increase interannual SST variability by approximately 9%. Additionally, there is a tendency for TIW wind to have an effect on the phase transition during ENSO evolution, with slightly shortened interannual oscillation periods. Additional sensitivity experiments were performed to elucidate the details of TIW wind effects on SST evolution during ENSO

  3. Forecasting of Surface Currents via Correcting Wind Stress with Assimilation of High-Frequency Radar Data in a Three-Dimensional Model

    Directory of Open Access Journals (Sweden)

    Lei Ren

    2016-01-01

    Full Text Available This paper details work in assessing the capability of a hydrodynamic model to forecast surface currents and in applying data assimilation techniques to improve model forecasts. A three-dimensional model Environment Fluid Dynamics Code (EFDC was forced with tidal boundary data and onshore wind data, and so forth. Surface current data from a high-frequency (HF radar system in Galway Bay were used for model intercomparisons and as a source for data assimilation. The impact of bottom roughness was also investigated. Having developed a “good” water circulation model the authors sought to improve its forecasting ability through correcting wind shear stress boundary conditions. The differences in surface velocity components between HF radar measurements and model output were calculated and used to correct surface shear stresses. Moreover, data assimilation cycle lengths were examined to extend the improvements of surface current’s patterns during forecasting period, especially for north-south velocity component. The influence of data assimilation in model forecasting was assessed using a Data Assimilation Skill Score (DASS. Positive magnitude of DASS indicated that both velocity components were considerably improved during forecasting period. Additionally, the improvements of RMSE for vector direction over domain were significant compared with the “free run.”

  4. The roles of vertical mixing, solar radiation, and wind stress in a model simulation of the sea surface temperature seasonal cycle in the tropical Pacfic Ocean

    Science.gov (United States)

    Chen, Dake; Busalacchi, Antonio J.; Rothstein, Lewis M.

    1994-01-01

    The climatological seasonal cycle of sea surface temperature (SST) in the tropical Pacific is simulated using a newly developed upper ocean model. The roles of vertical mixing, solar radiation, and wind stress are investigated in a hierarchy of numerical experiments with various combinations of vertical mixing algorithms and surface-forcing products. It is found that the large SST annual cycle in the eastern equatorial Pacific is, to a large extent, controlled by the annually varying mixed layer depth which, in turn, is mainly determined by the competing effects of solar radiation and wind forcing. With the application of our hybrid vertical mixing scheme the model-simulated SST annual cycle is much improved in both amplitude and phase as compared to the case of a constant mixed layer depth. Beside the strong effects on vertical mixing, solar radiation is the primary heating term in the surface layer heat budget, and wind forcing influences SST by driving oceanic advective processes that redistribute heat in the upper ocean. For example, the SST seasonal cycle in the western Pacific basically follows the semiannual variation of solar heating, and the cycle in the central equatorial region is significantly affected by the zonal advective heat flux associated with the seasonally reversing South Equatorial Current. It has been shown in our experiments that the amount of heat flux modification needed to eliminate the annual mean SST errors in the model is, on average, no larger than the annual mean uncertainties among the various surface flux products used in this study. Whereas a bias correction is needed to account for remaining uncertainties in the annual mean heat flux, this study demonstrates that with proper treatment of mixed layer physics and realistic forcing functions the seasonal variability of SST is capable of being simulated successfully in response to external forcing without relying on a relaxation or damping formulation for the dominant surface heat

  5. Sensitivity of simulated circulation dynamics to the choice of surface wind forcing in the Japan/East Sea

    Science.gov (United States)

    Hogan, Patrick J.; Hurlburt, Harley E.

    2005-06-01

    The circulation sensitivity to the choice of wind-forcing product is investigated with the NRL Layered Ocean Model (NLOM) configured for the Japan/East Sea. Monthly climatologies from seven different wind-stress data sets (and wind-stress curl) are formed from observed and model-derived atmospheric data sets. The resulting maps of wind-stress curl reveal significantly different spatial patterns and magnitudes, even two with largely opposite large-scale patterns of wind-stress curl. These wind sets were used in forcing three sets of simulations, 1/8° linear and 1/8° and 1/32° nonlinear. In addition, seasonally varying straits forcing (inflow through Tsushima balanced by outflow through Tsugaru and Soya) was included in all the simulations, and simulations with straits forcing only were performed. The 1.5-layer linear reduced-gravity simulations include only the lowest order dynamics, mainly Munk β 1/3 western boundary layers (due to both wind and straits forcing) and a Sverdrup interior. The nonlinear simulations add bottom topography, multiple internal modes, diapycnal mixing, and ventilation of layer interfaces. At 1/8° resolution, only weak barotropic/baroclinic instabilities occur, but at 1/32° resolution these are much stronger, allowing vigorous transfer of energy from the upper ocean to the abyssal layer via baroclinic instability. This drives much stronger mean abyssal currents that more strongly steer upper-ocean current pathways than at 1/8°, i.e. there is much stronger upper ocean-topographical coupling. The linear model simulates most of the basic features, e.g., the subpolar gyre with all but the straits forcing only, the East Korean Warm Current (EKWC) and its connection to the subpolar front with all but one wind-forcing set, but the remaining wind set gives a continuous Nearshore Branch (NB) of the Tsushima Warm Current along the coast of Honshu. In all of the linear simulations with an EKWC, the separation latitude from the coast of Korea is

  6. Wind Streaks

    Science.gov (United States)

    2004-01-01

    [figure removed for brevity, see original site] Released 12 July 2004 The atmosphere of Mars is a dynamic system. Water-ice clouds, fog, and hazes can make imaging the surface from space difficult. Dust storms can grow from local disturbances to global sizes, through which imaging is impossible. Seasonal temperature changes are the usual drivers in cloud and dust storm development and growth. Eons of atmospheric dust storm activity has left its mark on the surface of Mars. Dust carried aloft by the wind has settled out on every available surface; sand dunes have been created and moved by centuries of wind; and the effect of continual sand-blasting has modified many regions of Mars, creating yardangs and other unusual surface forms. Windstreaks are features caused by the interaction of wind and topographic landforms. The raised rims and bowls of impact craters causes a complex interaction such that the wind vortex in the lee of the crater can both scour away the surface dust and deposit it back in the center of the lee. If you look closely, you will see evidence of this in a darker 'rim' enclosing a brighter interior. Image information: VIS instrument. Latitude 6.9, Longitude 69.4 East (290.6 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing

  7. A vertical/horizontal integration wind-induced circulation model (VH13D): A method for including surface and bottom logarithmic profiles

    Science.gov (United States)

    Wu, Jian; Tsanis, Ioannis K.

    A three-dimensional model called VH13D is developed using the vertical/horizontal integration (VHI) approach. The double-logarithmic velocity profile including both the surface and bottom sublayer characteristic lengths is employed to accurately evaluate the bottom shear stress and depth-averaged advective terms. The model is verified using analytical solutions and laboratory data for shear-induced countercurrent flows and is compared with other two- and three-dimensional circulation models in a simplified basin. It is demonstrated that the newly developed model improves the conventional two-dimensional depth-averaged and Quasi-3D models and provides a new approach to the three-dimensional wind-induced circulation model. It can efficiently simulate the wind-induced 3D current structure in lakes and estuaries under isothermal conditions.

  8. Evaluating the effects of land use and cover change on the decrease of surface wind speed over China in recent 30 years using a statistical downscaling method

    Science.gov (United States)

    Wu, Jian; Zha, Jinlin; Zhao, Deming

    2017-01-01

    The long-term decrease of surface wind speed (SWS) has been revealed by previous studies in China in recent decades, but the reasons for the SWS decrease remain uncertain. In this paper, we evaluated the effects of land use and cover change (LUCC) on the SWS decrease during 1980-2011 over the Eastern China Plain (ECP) region using a combined method of statistical downscaling and observation minus reanalysis data, which was used to improve the climate prediction of general circulation models and to evaluate the influence of LUCC on climate change. To exclude the potential influence of LUCC on SWS observation, a statistical downscaling model (SDM) was established during 1980-1992 because a lower extent of LUCC occurred during this period than in later periods. The skill of the SDM was checked by comparing the results of different predictor combinations. Then, SDM was used to improve the wind speed data at 10 m above the surface in the ERA-Interim reanalysis data (V10m-ERA) during 1993-2011, which decreased the error in the reanalysis wind speed as far as possible. Then, the difference between the station observed SWS (V10m-OBV) and the downscaled SWS (V10m-SDM) during 1993-2011 (SWSD) was considered the quantitative estimation of the influence of the LUCC on SWS in this period. The V10m-SDM can capture both the large-scale and local characteristics in the observation, and their patterns are very similar. V10m-SDM has better performance in the spatial-temporal changes than does V10m-ERA with respect to V10m-OBV. The impact of LUCC on the SWS was pronounced, the SWSD was -0.24 m s-1 in 1993, and the SWSD reached -0.56 m s-1 in 2011. LUCC could induce a 0.17 m s-1 wind speed decrease per 10 year in the ECP region during 1993-2011. Furthermore, each 10 % rise of the urbanization rate could cause an approximately 0.12 m s-1 decrease in wind speed. Additionally, pressure-gradient force was eliminated as the primary cause of the observed long-term decrease of SWS in ECP by

  9. Observation-Consistent Input and Whitecapping Dissipation in a Model for Wind-Generated Surface Waves: Description and Simple Calculations

    Science.gov (United States)

    2012-09-01

    Faculty of Engineering and Industrial Science, Swinburne University of Technology, Melbourne, Victoria , Australia DAVID W. WANG Oceanography...C12), 9704-9706. way, ASME, 155-163. Young, I. R., 1999: Wind Generated Ocean Waves. Elsevier, 288 pp. Violante-Carvalho, N., F. J. Ocampo -Torres

  10. Wind Power

    OpenAIRE

    Makhalas, Kharsan Al; Alsehlli, Faisal

    2015-01-01

    This Bachelor thesis has been written at the Blekinge Institute of Technology. This thesis concentrates on the wind power and their components, also the large wind farm is studied. The electrical power is generated by using the power in wind to drive a wind turbine to produce mechanical power. This mechanical power can be converted into electrical power by using electrical induction generators. There are two types of the wind turbines, the horizontal axis and vertical axis wind turbine, where...

  11. Wind Sensor

    OpenAIRE

    Li, Jiaoyang; Ni, Jiqin

    2014-01-01

    Wind measurement is needed in many practical and scientific research situations. Some specific applications require to precisely measuring both wind direction and wind speed at the same time. Current commercial sensors for wind direction and wind speed measurement usually use ultrasonic technology and the sensors are very expensive (> $1500). In addition, the sensors are large in dimension and cannot measure airflow patterns in high spatial resolution. Therefore new and low cost wind speed an...

  12. Succession of the sea-surface microlayer in the coastal Baltic Sea under natural and experimentally induced low-wind conditions

    Directory of Open Access Journals (Sweden)

    C. Stolle

    2010-09-01

    Full Text Available The sea-surface microlayer (SML is located within the boundary between the atmosphere and hydrosphere. The high spatial and temporal variability of the SML's properties, however, have hindered a clear understanding of interactions between biotic and abiotic parameters at or across the air-water interface. Among the factors changing the physical and chemical environment of the SML, wind speed is an important one. In order to examine the temporal effects of minimized wind influence, SML samples were obtained from the coastal zone of the southern Baltic Sea and from mesocosm experiments in a marina to study naturally and artificially calmed sea surfaces. Organic matter concentrations as well as abundance, 3H-thymidine incorporation, and the community composition of bacteria in the SML (bacterioneuston compared to the underlying bulk water (ULW were analyzed. In all SML samples, dissolved organic carbon and nitrogen were only slightly enriched and showed low temporal variability, whereas particulate organic carbon and nitrogen were generally greatly enriched and highly variable. This was especially pronounced in a dense surface film (slick that developed during calm weather conditions as well as in the artificially calmed mesocosms. Overall, bacterioneuston abundance and productivity correlated with changing concentrations of particulate organic matter. Moreover, changes in the community composition in the field study were stronger in the particle-attached than in the non-attached bacterioneuston. This implies that decreasing wind enhances the importance of particle-attached assemblages and finally induces a succession of the bacterial community in the SML. Eventually, under very calm meteorological conditions, there is an uncoupling of the bacterioneuston from the ULW.

  13. Wind Retrieval using Marine Radars

    Science.gov (United States)

    2011-09-30

    Interaction (HiRes) DRI the NATO Undersea Research Center ( NURC ) wants to develop and validate methodologies to retrieve wind field parameters from X-band...marine radar. The main parameters NURC will focus on are the mean surface wind vector as well as the wind gusts in vicinity of the measurement platform

  14. Significance of frost action and surface soil characteristics to wind erosion at Rocky Flats, Colorado. Second progress report, October 1, 1975--May 30, 1976

    Energy Technology Data Exchange (ETDEWEB)

    Caine, N.; Morin, P.

    1976-01-01

    This report summarizes information on soil frost effects collected on Rocky Flats during the 1975-1976 winter. On a broad scale, work on soil textures at and just below the ground surface corroborates the conclusion reached earlier that the general frost susceptibility of the Rocky Flats soils is quite well keyed to topography. This is incorporated into a mapping procedure for potential soil frost activity which is applied to the northwestern part of the Rocky Flats area. On a site scale, instrumental records of weather conditions and soil responses have been maintained from October, 1975, to May, 1976, at the Lindsay Ranch study site, northwest of the Rocky Flats Plant. During that period, 33 needle ice events have been observed and recorded and are described in this report. A preliminary examination of wind data for the same period suggests that the soil in areas of natural vegetation on the site are not exposed to wind action. If, however, they were exposed, winds capable of eroding them are common.

  15. Data Fusion Between Microwave and Thermal Infrared Radiometer Data and Its Application to Skin Sea Surface Temperature, Wind Speed and Salinity Retrievals

    Directory of Open Access Journals (Sweden)

    Kohei Arai

    2013-03-01

    Full Text Available Method for data fusion between Microwave Scanning Radiometer: MSR and Thermal Infrared Radiometer: TIR derived skin sea surface temperature: SSST, wind speed: WS and salinity is proposed. SSST can be estimated with MSR and TIR radiometer data. Although the contribution ocean depth to MSR and TIR radiometer data are different each other, SSST estimation can be refined through comparisons between MSR and TIR derived SSST. Also WS and salinity can be estimated with MSR data under the condition of the refined SSST. Simulation study results support the idea of the proposed data fusion method.

  16. Sensing the wind profile

    Energy Technology Data Exchange (ETDEWEB)

    Pena, A.

    2009-03-15

    This thesis consists of two parts. The first is a synopsis of the theoretical progress of the study that is based on a number of journal papers. The papers, which constitute the second part of the report, aim to analyze, measure, and model the wind prole in and beyond the surface layer by combining observations from cup anemometers with lidars. The lidar is necessary to extend the measurements on masts at the Horns Rev offshore wind farm and over at land at Hoevsoere, Denmark. Both sensing techniques show a high degree of agreement for wind speed measurements performed at either sites. The wind speed measurements are averaged for several stability conditions and compare well with the surface-layer wind profile. At Hoevsoere, it is sufficient to scale the wind speed with the surface friction velocity, whereas at Horns Rev a new scaling is added, due to the variant roughness length. This new scaling is coupled to wind prole models derived for flow over the sea and tested against the wind proles up to 160 m at Horns Rev. The models, which account for the boundary-layer height in stable conditions, show better agreement with the measurements than compared to the traditional theory. Mixing-length parameterizations for the neutral wind prole compare well with length-scale measurements up to 300 m at Hoevsoere and 950 m at Leipzig. The mixing-length-derived wind proles strongly deviate from the logarithmic wind prole, but agree better with the wind speed measurements. The length-scale measurements are compared to the length scale derived from a spectral analysis performed up to 160 m at Hoevsoere showing high agreement. Mixing-length parameterizations are corrected to account for stability and used to derive wind prole models. These compared better to wind speed measurements up to 300 m at Hoevsoere than the surface-layer wind prole. The boundary-layer height is derived in nearneutral and stable conditions based on turbulent momentum uxes only and in unstable conditions

  17. Wind Resource Assessment of Gujarat (India)

    Energy Technology Data Exchange (ETDEWEB)

    Draxl, C.; Purkayastha, A.; Parker, Z.

    2014-07-01

    India is one of the largest wind energy markets in the world. In 1986 Gujarat was the first Indian state to install a wind power project. In February 2013, the installed wind capacity in Gujarat was 3,093 MW. Due to the uncertainty around existing wind energy assessments in India, this analysis uses the Weather Research and Forecasting (WRF) model to simulate the wind at current hub heights for one year to provide more precise estimates of wind resources in Gujarat. The WRF model allows for accurate simulations of winds near the surface and at heights important for wind energy purposes. While previous resource assessments published wind power density, we focus on average wind speeds, which can be converted to wind power densities by the user with methods of their choice. The wind resource estimates in this study show regions with average annual wind speeds of more than 8 m/s.

  18. Twenty-first century wave climate projections for Ireland and surface winds in the North Atlantic Ocean

    Science.gov (United States)

    Gallagher, Sarah; Gleeson, Emily; Tiron, Roxana; McGrath, Ray; Dias, Frédéric

    2016-04-01

    Ireland has a highly energetic wave and wind climate, and is therefore uniquely placed in terms of its ocean renewable energy resource. The socio-economic importance of the marine resource to Ireland makes it critical to quantify how the wave and wind climate may change in the future due to global climate change. Projected changes in winds, ocean waves and the frequency and severity of extreme weather events should be carefully assessed for long-term marine and coastal planning. We derived an ensemble of future wave climate projections for Ireland using the EC-Earth global climate model and the WAVEWATCH III® wave model, by comparing the future 30-year period 2070-2099 to the period 1980-2009 for the RCP4.5 and the RCP8.5 forcing scenarios. This dataset is currently the highest resolution wave projection dataset available for Ireland. The EC-Earth ensemble predicts decreases in mean (up to 2 % for RCP4.5 and up to 3.5 % for RCP8.5) 10 m wind speeds over the North Atlantic Ocean (5-75° N, 0-80° W) by the end of the century, which will consequently affect swell generation for the Irish wave climate. The WAVEWATCH III® model predicts an overall decrease in annual and seasonal mean significant wave heights around Ireland, with the largest decreases in summer (up to 15 %) and winter (up to 10 %) for RCP8.5. Projected decreases in mean significant wave heights for spring and autumn were found to be small for both forcing scenarios (less than 5 %), with no significant decrease found for RCP4.5 off the west coast in those seasons.

  19. 海滩湿润沙面起动摩阻风速的风洞实验%Wind Tunnel Experiment of the Threshold Friction Wind Velocity on Wet Beach Sand Surface

    Institute of Scientific and Technical Information of China (English)

    韩庆杰; 屈建军; 张克存; 俎瑞平; 廖空太; 牛清河

    2011-01-01

    Wind erosion is one kind of important geomorphology processes and geological disasters,which has significant impacts on dune growth and desertification,and causes damages to architecture on sea coasts.The moisture of sand surface layer greatly affects the threshold wind velocity and sand stability,thus,it is also one of the important influence factors on wind erosion.In this study,we investigated the influence of surface moisture content at 1-mm depth on sand erosion in tropical humid coast of southern China,and established a new predicting model.The modeling results indicated that the threshold friction velocity increased linearly with increasing of ln100M(M is gravimetric moisture content) in condition of given sand diameters.Evaluation was given to seven popular models for predicting the threshold friction velocity on moisture sediments,and found that there were significant differences among their predicted results.At a surface sand moisture content of 0.0124(M1.5),the predicted threshold friction velocity predicted by the seven models were 34% to 195% larger than the observed threshold friction velocity on dry sands;at a surface sand moisture content of lower than 0.0062(0.5 M1.5),the predicted values by models of Chepil and Saleh well matched the experimental data;but when surface sand moisture content of more than 0.0062(0.5 M1.5),the data simulated by the Belly's empirical model were seem same as the experimental data.%风蚀是一种重要的地貌过程和地质灾害,它影响海岸沙丘的增长,加速土地沙漠化并危害沿岸建筑。沙面湿度强烈影响沙粒的临界起动风速和沙面稳定性,因此,也是影响风蚀过程的一个重要因子。本项风洞实验使用华南热带湿润海岸的海滩沙,研究了表面湿度(1mm深)对海滩沙风蚀起动的影响,建立了一个新的预测热带湿润海滩湿沙起动摩阻风速的模型,该模型指明给定粒径下,湿沙的起动摩阻风速随ln100 M

  20. Evaluation of wind electric energy based on martian wind measurements

    Science.gov (United States)

    Nishikawa, Y.; Kurita, K.

    2012-12-01

    Since Mars is characterized by strong surface wind, electric power generation by the wind activity has been proposed as a possible power source for martian base station as well as that for exploration module (George James et al., 1999, Vimal Kumar et al., 2010). George and Vimal estimated total power as 19kW and 500W, which they conclude is sufficient value as a power source of small exploration module. These values seem comparable to that used in MER( 900Wh per day ). But their estimate largely depends on the model of wind velocity and reevaluation is necessary based on plausible wind model as well as more realistic assumptions about power generation. This study evaluates plausible range of available power by using surface wind model estimated by Viking Lander measurements. Meteorological package of Viking Lander measured wind velocity and its direction at 1.6m hight at every 60 min. for 200 sols. We estimate wind statistics by using Weibull distribution function and elevation offset. We calculate the wind energy by wind turbines as the integrated value of power produced in a Martian day, and compare with solar panel and nuclear battery under various conditions (Mars ground roughness, blade length, shape of wind turbine and rotor height from the ground). As a result of the calculations, we obtain reasonable amount of wind electricity (1000 Wh per day ), which can be used if we select proper locations and suitable wind turbine.

  1. On Estimation of Surface Roughness for Wind Energy Resources Assessment%风能资源评估中地表粗糙度的研究

    Institute of Scientific and Technical Information of China (English)

    李军; 胡非; 刘磊; 王丙兰

    2011-01-01

    There are two commonly used techniques, i.e., fitting to logarithmic wind profile and the Davenport roughness classification system, in wind energy resources assessment, which were used for evaluation of surface aerodynamics roughness length of a steppe in Inner Mongolia. It was expected that the grassland location would have roughness lengths between the Davenport classes of the Fifth (0.25 m) to the Third (0.03 m). Data, collected from May 21, 2009 through May 14, 2010 and measured by cup anemometers and wind vanes (1Hz) deployed at four levels (10, 30, 50 and 70 meters above the ground), were analyzed. If one of the levels had missing data for a time period, all records from that time period were removed from the analysis. Then, original data were averaged over 10 minute intervals. Time periods with wind speed at 50 m height or above 6 m/s, were chosen for further analysis, which was because if wind speed at 50 m height is under 6 m/s, most large turbines would generate little usable power. This approach is useful for wind resource assessment in the absence of stability calculation and can largely reduce errors of calculation of roughness length. Ten-minute averaged wind profiles were classified into categories of twelve directions. The liner least-squares method was used to fit the averaged logarithmic wind profiles. It was found that the roughness length had monthly and seasonal variations. In summer-fall months when grass was lush, the average roughness length was measured to be 0.138 m and in winter-spring months when grass was shriveled, it was measured to be 0.088 m. The minimum value of the monthly-average roughness length was 0.041 m appearing in January of 2010, which may have reflected that the land was covered by snow. The hourly-average roughness lengths showed a diurnal variation, with the maximum value occurring at midnight and the minimum value at noon. The roughness lengths computed based on southwest and west wind measurements

  2. Contol of Surface Mounted Permanent Magnet Motors with Special Application to Motors with Fractional-Slot Concentrated Windings

    Energy Technology Data Exchange (ETDEWEB)

    Patil, N.; Lawler, J.S.; McKeever, J.

    2007-07-31

    A 30-pole, 6-kW prototype of a fractional-slot permanent magnet synchronous motor (PMSM) design has been developed to operate at a maximum speed of 6000 rpm [1,2]. This machine has significantly more inductance than regular PMSMs with distributed windings. The prototype was delivered in April 2006 to the Oak Ridge National Laboratory (ORNL) for testing and development of a suitable controller. To prepare for this test/control development effort, ORNL used PMSM models developed over a number of previous studies to preview the control issues that arise when a dynamic controller drives a high inductance PMSM machine during steady state performance evaluations. The detailed steady state model developed includes all motor and inverter loss mechanisms and was useful for assessing the performance of the dynamic controller before it was put into operation. This report documents the results of tests demonstrating the effectiveness of ORNL's simple low-cost control scheme during characterization of the fractional-slot concentrated windings (FSCW) PMSM motor. The control scheme is simple because only the supply voltage magnitude and the phase angle between the back-electromotive force (emf) and the supply voltage is controlled. It is low-cost because it requires no current or phase voltage sensors.

  3. Wind reduction by aerosol particles

    Science.gov (United States)

    Jacobson, Mark Z.; Kaufman, Yoram J.

    2006-12-01

    Aerosol particles are known to affect radiation, temperatures, stability, clouds, and precipitation, but their effects on spatially-distributed wind speed have not been examined to date. Here, it is found that aerosol particles, directly and through their enhancement of clouds, may reduce near-surface wind speeds below them by up to 8% locally. This reduction may explain a portion of observed ``disappearing winds'' in China, and it decreases the energy available for wind-turbine electricity. In California, slower winds reduce emissions of wind-driven soil dust and sea spray. Slower winds and cooler surface temperatures also reduce moisture advection and evaporation. These factors, along with the second indirect aerosol effect, may reduce California precipitation by 2-5%, contributing to a strain on water supply.

  4. Wind energy meteorology atmospheric physics for wind power generation

    CERN Document Server

    Emeis, Stefan

    2012-01-01

    This book is intended to give an introduction into the meteorological boundary conditions for power generation from the wind, onshore and offshore. It aims to provide reliable meteorological information for the planning and running of this important kind of renewable energy. This includes the derivation of wind laws and wind profile descriptions, especially those above the logarithmic surface layer. Winds over complex terrain and nocturnal low-level jets are considered as well. A special chapter is devoted to the efficiency of large wind parks and their wakes.

  5. Solar wind ion impacts into ice surfaces: A molecular-dynamics study using the REAX force field

    Science.gov (United States)

    Anders, Christian; Urbassek, Herbert M.

    2017-01-01

    Molecular dynamics simulation is used to study the effects of solar-wind ion irradiation on an ice target, focusing on the effects of nuclear energy deposition. A reactive force field (REAX) interatomic interaction potential is employed that allows us to model the breaking and formation of molecular bonds and hence to follow the chemistry occurring in the target. As ions we study H and He ions as typical constituents of the solar wind, and Ne as an example of a heavier ion; they impact at the speed of maximum flux in the solar wind, 400 km/s. The ice consists of a mixture of H2O, CO2, CH3OH and NH3. We find that molecular dissociations occur within 0.2 ps after ion impact and new products are formed up to a time of 1 ps; only water has a slower dynamics, due to highly mobile H atoms allowing for late recombinations. The number of dissociations, and hence also of product molecules increases from H over He to Ne ion projectiles and can be quantified by the amount of energy deposited in the target by these ions. The most abundant products formed include CO, OH and NH2. Reaction products are most complex for Ne impact, and include H3O, formaldehyde (H2CO), HO2, and NO. Formaldehyde is important as it is formed relatively frequently and is known as a precursor in the formation of sugars. In addition, molecules containing all CHON elements are formed, among which are CH2NO, CONH, methanolamine (CH5NO), and ethyne (C2H2). Repeated impacts generate novel, and more complex product species; we found CN, CH4, CH3NO, methylamine (CH3NH2), and acetamide (CH3CONH2), among others; the complex species are formed less frequently than the simple fragments. Sputtering occurs for all projectiles, even H. The ejecta are either original molecules - in particular CO2 - or simple fragments; only few product molecules are emitted.

  6. County-Level Climate Uncertainty for Risk Assessments: Volume 18 Appendix Q - Historical Maximum Near-Surface Wind Speed.

    Energy Technology Data Exchange (ETDEWEB)

    Backus, George A.; Lowry, Thomas Stephen; Jones, Shannon M; Walker, La Tonya Nicole; Roberts, Barry L; Malczynski, Leonard A.

    2017-06-01

    This report uses the CMIP5 series of climate model simulations to produce country- level uncertainty distributions for use in socioeconomic risk assessments of climate change impacts. It provides appropriate probability distributions, by month, for 169 countries and autonomous-areas on temperature, precipitation, maximum temperature, maximum wind speed, humidity, runoff, soil moisture and evaporation for the historical period (1976-2005), and for decadal time periods to 2100. It also provides historical and future distributions for the Arctic region on ice concentration, ice thickness, age of ice, and ice ridging in 15-degree longitude arc segments from the Arctic Circle to 80 degrees latitude, plus two polar semicircular regions from 80 to 90 degrees latitude. The uncertainty is meant to describe the lack of knowledge rather than imprecision in the physical simulation because the emphasis is on unfalsified risk and its use to determine potential socioeconom ic impacts. The full report is contained in 27 volumes.

  7. F-18 high alpha research vehicle surface pressures: Initial in-flight results and correlation with flow visualization and wind-tunnel data

    Science.gov (United States)

    Fisher, David F.; Banks, Daniel W.; Richwine, David M.

    1990-01-01

    Pressure distributions measured on the forebody and the leading-edge extensions (LEX's) of the NASA F-18 high alpha research vehicle (HARV) were reported at 10 and 50 degree angles of attack and at Mach 0.20 to 0.60. The results were correlated with HARV flow visualization and 6-percent scale F-18 wind-tunnel-model test results. The general trend in the data from the forebody was for the maximum suction pressure peaks to first appear at an angle of attack (alpha) of approximately 19 degrees and increase in magnitude with angle of attack. The LEX pressure distribution general trend was the inward progression and increase in magnitude of the maximum suction peaks up to vortex core breakdown and then the decrease and general flattening of the pressure distribution beyond that. No significant effect of Mach number was noted for the forebody results. However, a substantial compressibility effect on the LEX's resulted in a significant reduction in vortex-induced suction pressure as Mach number increased. The forebody primary and the LEX secondary vortex separation lines, from surface flow visualization, correlated well with the end of pressure recovery, leeward and windward, respectively, of maximum suction pressure peaks. The flight to wind-tunnel correlations were generally good with some exceptions.

  8. Metric of the 2–6 day sea-surface temperature response to wind stress in the Tropical Pacific and its sensitivity to the K-Profile Parameterization of vertical mixing

    KAUST Repository

    Wagman, Benjamin M.

    2014-05-04

    Uncertainty in wind forcing has long hampered direct tests of ocean model output against observations for the purpose of refining the boundary layer K-Profile Parameterization (KPP) of oceanic vertical mixing. Considered here is a short-term metric that could be sensitive to the ways in which the KPP directly affects the adjustment of sea surface temperatures for a given change in wind stress. In particular a metric is developed based on the lagged correlation between the 2–6 day filtered wind stress and sea surface temperature. The metric is normalized by estimated observational and model uncertainties such that the significance of differences may be assessed. For this purpose multiple wind reanalysis products and their blended combinations were used to represent the range of forcing uncertainty, while perturbed KPP parameter model runs explore the sensitivity of the metric to the parameterization of vertical mixing. The correlation metric is sensitive to perturbations to most KPP parameters, in ways that accord with expectations, although only a few parameters show a sensitivity on the same order as the sensitivity to switching between wind products. This suggests that uncertainties in wind forcing continue to be a significant limitation for applying direct observational tests of KPP physics. Moreover, model correlations are biased high, suggesting that the model lacks or does not resolve sources of variability on the 2–6 day time scale.

  9. Measurements of water film characteristics on airfol surfaces from wind-tunnel tests with simulated heavy rain

    Science.gov (United States)

    Hastings, E. C., Jr.; Manuel, G. S.

    1985-01-01

    This paper discusses some of the surface water characteristics obtained during recent simulated heavy rain experiments conducted at the Langley Research Center. Water film distributions and discrete film thickness measurements on several model wings are discussed. The water film distributions on the upper surfaces are shown in photographs from cameras mounted above the models, and film thickness data are presented which were obtained using resistance sensors mounted flush with the upper and lower wing model surfaces. The paper also discusses potential sources of performance decrements indicated by the data.

  10. Control of Surface Mounted Permanent Magnet Motors with Special Application to Fractional-Slot Motors with Concentrated Windings

    Energy Technology Data Exchange (ETDEWEB)

    McKeever, John W [ORNL; Patil, Niranjan [University of Tennessee, Knoxville (UTK); Lawler, Jack [ORNL

    2007-07-01

    A 30 pole, 6 kW, and 6000 maximum revolutions per minute (rpm) prototype of the permanent magnet synchronous motor (PMSM) with fractional-slot concentrated windings (FSCW) has been designed, built, and tested at the University of Wisconsin at Madison (UWM). This machine has significantly more inductance than that of regular PMSMs. The prototype was delivered in April 2006 to the Oak Ridge National Laboratory (ORNL) for testing and development of a controller that will achieve maximum efficiency. In advance of the test/control development effort, ORNL has used the PMSM models developed over a number of previous studies to study how steady state performance of high inductance PMSM machines relates to control issues. This report documents the results of this research. The amount of inductance that enables the motor to achieve infinite constant power speed ratio (CPSR) is given by L{sub {infinity}} = E{sub b}/{Omega}{sub b}I{sub R}, where E{sub b} is the root-mean square (rms) magnitude of the line-to-neutral back-electromotive force (emf) at base speed, {Omega}{sub b} is the base speed in electrical radians per second, and I{sub R} is the rms current rating of the motor windings. The prototype machine that was delivered to ORNL has about 1.5 times as much inductance as a typical PMSM with distributed integral slot windings. The inventors of the FSCW method, who designed the prototype machine, remarked that they were 'too successful' in incorporating inductance into their machine and that steps would be taken to modify the design methodology to reduce the inductance to the optimum value. This study shows a significant advantage of having the higher inductance rather than the optimal value because it enables the motor to develop the required power at lower current thereby reducing motor and inverter losses and improving efficiency. The main problem found with high inductance machines driven by a conventional phase advance (CPA) method is that the motor current

  11. Geosat altimeter derived sea surface wind speeds and significant wave heights for the north Indian Ocean and their comparison with in situ data

    Digital Repository Service at National Institute of Oceanography (India)

    Vethamony, P.; Vaithiyanathan, R.; Almeida, A.M.; Santanam, K.; Rao, L.V.G.; Sarkar, A.; Kumar, R.; Gairola, R.M.; Gohil, B.S.

    coded maps, showing the distribution of mean monthly values of wind and wave parameters over 2.5 degrees square grids. Altimeter derived wind and wave parameters are compared with (1) winds and waves obtained through ships of opportunity and documented...

  12. Influence of wind conditions on wind turbine loads and measurement of turbulence using lidars

    NARCIS (Netherlands)

    Sathe, A.R.

    2012-01-01

    Variations in wind conditions influence the loads on wind turbines significantly. In order to determine these loads it is important that the external conditions are well understood. Wind lidars are well developed nowadays to measure wind profiles upwards from the surface. But how turbulence can be m

  13. Influence of wind conditions on wind turbine loads and measurement of turbulence using lidars

    NARCIS (Netherlands)

    Sathe, A.R.

    2012-01-01

    Variations in wind conditions influence the loads on wind turbines significantly. In order to determine these loads it is important that the external conditions are well understood. Wind lidars are well developed nowadays to measure wind profiles upwards from the surface. But how turbulence can be

  14. Testing compost as an anti wind erosion agent in a wind tunnel

    NARCIS (Netherlands)

    Vos, de J.A.

    1996-01-01

    The potential of compost as an anti wind erosion agent was studied in a wind tunnel on a sandy soil susceptible to wind erosion. Soil treated with a compost-water mixture, which forms a crust on the soil surface after drying, was exposed to a series of increasing wind speeds. Two composts were

  15. Reminiscences on the study of wind waves

    OpenAIRE

    MITSUYASU, Hisashi

    2015-01-01

    The wind blowing over sea surface generates tiny wind waves. They develop with time and space absorbing wind energy, and become huge wind waves usually referred to ocean surface waves. The wind waves cause not only serious sea disasters but also take important roles in the local and global climate changes by affecting the fluxes of momentum, heat and gases (e.g. CO2) through the air-sea boundary. The present paper reviews the selected studies on wind waves conducted by our group in the Resear...

  16. Estimation of the Lagrangian structure function constant ¤C¤0 from surface-layer wind data

    DEFF Research Database (Denmark)

    Anfossi, D.; Degrazia, G.; Ferrero, E.

    2000-01-01

    Eulerian turbulence observations, made in the surface layer under unstable conditions (z/L > 0), by a sonic anemometer were used to estimate the Lagrangian structure function constant C(0). Two methods were considered. The first one makes use of a relationship, widely used in the Lagrangian stoch...

  17. Wind fence enclosures for infrasonic wind noise reduction.

    Science.gov (United States)

    Abbott, JohnPaul; Raspet, Richard; Webster, Jeremy

    2015-03-01

    A large porous wind fence enclosure has been built and tested to optimize wind noise reduction at infrasonic frequencies between 0.01 and 10 Hz to develop a technology that is simple and cost effective and improves upon the limitations of spatial filter arrays for detecting nuclear explosions, wind turbine infrasound, and other sources of infrasound. Wind noise is reduced by minimizing the sum of the wind noise generated by the turbulence and velocity gradients inside the fence and by the area-averaging the decorrelated pressure fluctuations generated at the surface of the fence. The effects of varying the enclosure porosity, top condition, bottom gap, height, and diameter and adding a secondary windscreen were investigated. The wind fence enclosure achieved best reductions when the surface porosity was between 40% and 55% and was supplemented by a secondary windscreen. The most effective wind fence enclosure tested in this study achieved wind noise reductions of 20-27 dB over the 2-4 Hz frequency band, a minimum of 5 dB noise reduction for frequencies from 0.1 to 20 Hz, constant 3-6 dB noise reduction for frequencies with turbulence wavelengths larger than the fence, and sufficient wind noise reduction at high wind speeds (3-6 m/s) to detect microbaroms.

  18. South Baltic Wind Atlas

    DEFF Research Database (Denmark)

    Pena Diaz, Alfredo; Hahmann, Andrea N.; Hasager, Charlotte Bay

    A first version of a wind atlas for the South Baltic Sea has been developed using the WRF mesoscale model and verified by data from tall Danish and German masts. Six different boundary-layer parametrization schemes were evaluated by comparing the WRF results to the observed wind profiles...... at the masts. The WRF modeling was done in a nested domain of high spatial resolution for 4 years. In addition the longterm wind statistics using the NCAR-NCEP reanalysis data were performed during 30 years to provide basis for a long-term adjustment of the results and the final WRF results include a weighting...... for the long-term trends variability in the South Baltic Sea. Observations from Earth observing satellites were used to evaluate the spatial resolution of the WRF model results near the surface. The QuikSCAT and the WRF results compared well whereas the Envisat ASAR mean wind map showed some variation...

  19. Reminiscences on the study of wind waves

    Science.gov (United States)

    MITSUYASU, Hisashi

    2015-01-01

    The wind blowing over sea surface generates tiny wind waves. They develop with time and space absorbing wind energy, and become huge wind waves usually referred to ocean surface waves. The wind waves cause not only serious sea disasters but also take important roles in the local and global climate changes by affecting the fluxes of momentum, heat and gases (e.g. CO2) through the air-sea boundary. The present paper reviews the selected studies on wind waves conducted by our group in the Research Institute for Applied Mechanics (RIAM), Kyushu University. The themes discussed are interactions between water waves and winds, the energy spectrum of wind waves, nonlinear properties of wind waves, and the effects of surfactant on some air-sea interaction phenomena. PMID:25864467

  20. Reminiscences on the study of wind waves.

    Science.gov (United States)

    Mitsuyasu, Hisashi

    2015-01-01

    The wind blowing over sea surface generates tiny wind waves. They develop with time and space absorbing wind energy, and become huge wind waves usually referred to ocean surface waves. The wind waves cause not only serious sea disasters but also take important roles in the local and global climate changes by affecting the fluxes of momentum, heat and gases (e.g. CO2) through the air-sea boundary. The present paper reviews the selected studies on wind waves conducted by our group in the Research Institute for Applied Mechanics (RIAM), Kyushu University. The themes discussed are interactions between water waves and winds, the energy spectrum of wind waves, nonlinear properties of wind waves, and the effects of surfactant on some air-sea interaction phenomena.

  1. 新疆地区25a地面风场特征分析%Analysis of Surface Wind Field Characteristics in the Last 25 Years in Xinjiang,China

    Institute of Scientific and Technical Information of China (English)

    化希平; 高晓清; 惠小英; 邓国卫; 陈伯龙

    2012-01-01

    In addition to be impacted by large-scale atmosphere circulation,the surface wind is also influenced by regional terrain.In Xinjiang,there are large basins,big mountains and canyons,so surface wind field is special there.In this paper,based on Xinjiang surface wind field data from 1980 to 2004,long-term surface wind field characteristics of this region are analyzed,and the empirical orthogonal function decomposition to the data is made.Results show that there are significant differences between surface wind field in northern,eastern and southern Xinjiang,especially in wind direction changes: northwest wind for northern Xinjiang,east wind for southern Xinjiang,airflow conversion of anticyclonic from northwest wind to east wind for eastern Xinjiang.Analysis of long-term change of meridional wind in Xinjiang shows that the meridional wind is manifested in increase of southerly wind anomalies,while the zonal wind is manifested in weakening of westerly wind anomalies.Meridional wind change has 3—5 years short-term change cycle in the whole time series,and zonal wind change has 3—6 years cycle,and they all show a phenomenon of continuation of their cycles growth over the time lengthen.The maximum value of the meridional southerly wind anomalies occurs at Qijiaojing,while the maximum value of meridional northerly wind anomalies occurs at Alashankou.The maximum value of zonal wind westerly wind anomalies is also at Qijiaojing,while the maximum value of zonal easterly wind anomalies is at Andehe.EOF analysis shows that the variance contribution of the first mode is 87.5%,while the anomaly values of temporal coefficient of the first mode showed "positive-negative-positive" trend.%地面风除了受大范围环流影响外,还受地形影响较大。新疆既有大的盆地,又有高山垭口,造就了特殊的新疆地面风场。利用新疆54个气象站1980—2004年,每日4个时次的地面风资料,分析了该地区地面风场的长期特征,并进行经

  2. Wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Yeoman, J.C. Jr.

    1978-12-01

    This evaluation of wind turbines is part of a series of Technology Evaluations of possible components and subsystems of community energy systems. Wind turbines, ranging in size from 200 W to 10 MW, are discussed as candidates for prime movers in community systems. Estimates of performance characteristics and cost as a function of rated capacity and rated wind speed are presented. Data concerning material requirements, environmental effects, and operating procedures also are given and are represented empirically to aid computer simulation.

  3. Effect of Wind Direction on ENVISAT ASAR Wind Speed Retrieval

    DEFF Research Database (Denmark)

    Takeyama, Yuko; Ohsawa, Teruo; Kozai, Katsutoshi

    2010-01-01

    This paper presents an evaluation of effects of wind directions (NCEP, MANAL, QuickSCAT and WRF) on the sea surface wind speed retrieval from 75 ENVISAT ASAR images with four C-band Geophysical model functions, CMOD4, CMOD_IFR2, CMOD5 and CMOD5N at two target areas, Hiratsuka and Shirahama...

  4. Mexico Wind Resource Assessment Project

    Energy Technology Data Exchange (ETDEWEB)

    Schwartz, M.N.; Elliott, D.L.

    1995-05-01

    A preliminary wind energy resource assessment of Mexico that produced wind resource maps for both utility-scale and rural applications was undertaken as part of the Mexico-U.S. Renewable Energy Cooperation Program. This activity has provided valuable information needed to facilitate the commercialization of small wind turbines and windfarms in Mexico and to lay the groundwork for subsequent wind resource activities. A surface meteorological data set of hourly data in digital form was utilized to prepare a more detailed and accurate wind resource assessment of Mexico than otherwise would have been possible. Software was developed to perform the first ever detailed analysis of the wind characteristics data for over 150 stations in Mexico. The hourly data set was augmented with information from weather balloons (upper-air data), ship wind data from coastal areas, and summarized wind data from sources in Mexico. The various data were carefully evaluated for their usefulness in preparing the wind resource assessment. The preliminary assessment has identified many areas of good-to-excellent wind resource potential and shows that the wind resource in Mexico is considerably greater than shown in previous surveys.

  5. Wind Energy

    Energy Technology Data Exchange (ETDEWEB)

    Ganley, Jason; Zhang, Jie; Hodge, Bri-Mathias

    2016-03-15

    Wind energy is a variable and uncertain renewable resource that has long been used to produce mechanical work, and has developed into a large producer of global electricity needs. As renewable sources of energy and feedstocks become more important globally to produce sustainable products, many different processes have started adopting wind power as an energy source. Many times this is through a conversion to hydrogen through electrolysis that allows for a more continuous process input. Other important pathways include methanol and ammonia. As the demand for sustainable products and production pathways increases, and wind power capital costs decrease, the role of wind power in chemical and energy production seems poised to increase significantly.

  6. A new geometrical construction using rounded surfaces proposed for the transverse flux machine for direct drive wind turbine

    DEFF Research Database (Denmark)

    Argeseanu, Alin; Nica, Florin Valentin Traian; Ritchie, Ewen;

    2014-01-01

    This paper proposes a new construction for transverse flux machines (TFM) using a rounded surfaces core geometry. The new concept has been developed for TFM with U core geometry. In this case a new analytic design procedure was proposed. The analytic design of the new TFM construction is further...... improved by FEM modelling and analysis. Using the new concept, a significant reduction of the active materials is obtained. The innovative geometry also provides a uniform magnetic field in the core structure. According to the comparison of both the TFM with prismatic and rounded core geometries the new...

  7. Some challenges of wind modelling for modern wind turbines: The Weibull distribution

    DEFF Research Database (Denmark)

    Gryning, Sven-Erik; Batchvarova, Ekatarina; Floors, Rogier;

    2012-01-01

    Wind power assessments, as well as forecast of wind energy production, are key issues in wind energy and grid related studies. However the hub height of today’s wind turbines is well above the surface layer. Wind profiles studies based on mast data show that the wind profile above the surface layer...... depends on the planetary boundary layer (PBL) structure and height, thus parameters that are not accounted for in today’s traditional applied flow simulation models and parameterizations. Here we report on one year of measurements of the wind profile performed by use of a long range wind lidar (WSL 70) up...... to a height of 600 meters with 50 meters resolution. The lidar is located at a flat coastal site. The applicability of the WRF model to predict some of the important parameters for wind energy has been investigated. In this presentation, some general results on the ability of WRF to predict the wind profile...

  8. Vertical distribution of soil moisture and surface sandy soil wind erosion for different types of sand dune on the southeastern margin of the Mu Us Sandy Land, China

    Institute of Scientific and Technical Information of China (English)

    ChaoFeng Fu; JingBo Zhao; FanMin Mei; TianJie Shao; Jun Zuo

    2015-01-01

    Soil moisture is a critical state affecting a variety of land surface and subsurface processes. We report investigation results of the factors controlling vertical variation of soil moisture and sand transport rate of three types of dunes on the south-eastern margin of the Mu Us Sandy Land. Samples were taken from holes drilled to a depth of 4 m at different topographic sites on the dunes, and were analyzed for soil moisture, grain-size distribution and surface sediment discharge. The results show that: (1) The average soil moisture varies in different types of dunes, with the following sequences ordered from highest to lowest: in the shrubs-covered dunes and the trees-covered dunes the sequence is from inter-dunes lowland to windward slope to leeward slope. The average moisture in the bare-migratory sand dunes is sequenced from inter-dunes lowland to leeward slope to windward slope. (2) Vegetation form and surface coverage affect the range of soil moisture of different types of dunes in the same topographic position. The coefficient of variation of soil moisture for shrubs-covered dunes is higher than that of other types of dune. (3) The effect of shrubs on dune soil moisture is explained in terms of the greater ability of shrubs to trap fine-grained atmospheric dust and hold moisture. (4) The estimated sand transport rates over sand dunes with sparse shrubs are less than those over bare-migratory dunes or sand dunes with sparse trees, indi-cating that shrubs are more effective in inhibiting wind erosion in the sandy land area.

  9. Wind-induced ground motion

    Science.gov (United States)

    Naderyan, Vahid; Hickey, Craig J.; Raspet, Richard

    2016-02-01

    Wind noise is a problem in seismic surveys and can mask the seismic signals at low frequency. This research investigates ground motions caused by wind pressure and shear stress perturbations on the ground surface. A prediction of the ground displacement spectra using the measured ground properties and predicted pressure and shear stress at the ground surface is developed. Field measurements are conducted at a site having a flat terrain and low ambient seismic noise. Triaxial geophones are deployed at different depths to study the wind-induced ground vibrations as a function of depth and wind velocity. Comparison of the predicted to the measured wind-induced ground displacement spectra shows good agreement for the vertical component but significant underprediction for the horizontal components. To validate the theoretical model, a test experiment is designed to exert controlled normal pressure and shear stress on the ground using a vertical and a horizontal mass-spring apparatus. This experiment verifies the linear elastic rheology and the quasi-static displacements assumptions of the model. The results indicate that the existing surface shear stress models significantly underestimate the wind shear stress at the ground surface and the amplitude of the fluctuation shear stress must be of the same order of magnitude as the normal pressure. Measurement results show that mounting the geophones flush with the ground provides a significant reduction in wind noise on all three components of the geophone. Further reduction in wind noise with depth of burial is small for depths up to 40 cm.

  10. Final Report on Control Algorithm to Improve the Partial-Load Efficiency of Surface PM Machines with Fractional-Slot Concentrated Windings

    Energy Technology Data Exchange (ETDEWEB)

    McKeever, John W [ORNL; Reddy, Patel [University of Wisconsin; Jahns, Thomas M [ORNL

    2007-05-01

    Surface permanent magnet (SPM) synchronous machines using fractional-slot concentrated windings are being investigated as candidates for high-performance traction machines for automotive electric propulsion systems. It has been shown analytically and experimentally that such designs can achieve very wide constant-power speed ratios (CPSR) [1,2]. This work has shown that machines of this type are capable of achieving very low cogging torque amplitudes as well as significantly increasing the machine power density [3-5] compared to SPM machines using conventional distributed windings. High efficiency can be achieved in this class of SPM machine by making special efforts to suppress the eddy-current losses in the magnets [6-8], accompanied by efforts to minimize the iron losses in the rotor and stator cores. Considerable attention has traditionally been devoted to maximizing the full-load efficiency of traction machines at their rated operating points and along their maximum-power vs. speed envelopes for higher speeds [9,10]. For example, on-line control approaches have been presented for maximizing the full-load efficiency of PM synchronous machines, including the use of negative d-axis stator current to reduce the core losses [11,12]. However, another important performance specification for electric traction applications is the machine's efficiency at partial loads. Partial-load efficiency is particularly important if the target traction application requires long periods of cruising operation at light loads that are significantly lower than the maximum drive capabilities. While the design of the machine itself is clearly important, investigation has shown that this is a case where the choice of the control algorithm plays a critical role in determining the maximum partial-load efficiency that the machine actually achieves in the traction drive system. There is no evidence that this important topic has been addressed for this type of SPM machine by any other

  11. Wind profiles in and over trees

    Institute of Scientific and Technical Information of China (English)

    ZHUJiao-jun; LIXiu-fen; GondaYutaka; MatsuzakiTakeshi

    2004-01-01

    One of the most important and frequently studied variable in forests and the most basic element in governing transport processes of airflow is wind speed. The study of wind profile, defined as the change of wind velocity with height, and wind velocity are important because of tree physiological and developmental responses. Generally, wind profiles above the ground or at a canopy surface follow classical logarithm law, but wind profiles in a single tree and in a forest stand are not logarithmic. This paper summarizes the results of wind profile studies within a single tree, in a forest stand, above the forest canopy and in a forest area from recent research in a coastal pine forest. The results demonstrate that: 1) wind profiles with in a single conifer tree crown showed an exponential function with height, 2) wind profiles in forest stands were able to be expressed by attenuation coefficient of wind, 3) wind profiles over a forest canopy could be determined using profile parameters (friction velocity, roughness length and displacement), and 4) for a forest area, the extreme wind speed could be predicted reasonably using the methods developed for the design of buildings. More research will be required to demonstrate: 1) relationships between wind profiles and tree or stand characteristics, 2) the simple methods for predicting wind profile parameters, and 3) the applications of wind profile in studies of tree physiology, forest ecology and management, and the detail ecological effects of wind on tree growth.

  12. Characterization of Surface Level Wind in the Centro de Lançamento de Alcântara for Use in Rocket Structure Loading and Dipersion Studies

    Directory of Open Access Journals (Sweden)

    Edson R. Marciotto

    2012-03-01

    Full Text Available We present wind data collected for ten days during the dry season in 2008 during the Murici II Campaign, which was carried out in the area of the Centro de Lançamento de Alcântara (CLA. The main goals are to better understand processes governing the wind regime in the CLA and the development of tools for analyzing the impact of wind on rocket structure and on the dispersion of pollutants released during the launch. A set of 11 aerovanes (ten at 10-m height and one at 1.5-m height plus a sonic anemometer at 1.5-m height were deployed to measure wind speed and direction, which were stored as ten-minute data. Turbulence intensity, gust factor, and gust amplitude were computed from the available dataset. Statistical analysis shows that the wind direction is predominant from East-Northeast (ENE, with the mean vector wind direction of 60o, in agreement with the trade wind regime. The diurnal cycle of all statistical properties of the wind are strongly marked. Wind speed, turbulence intensity, and gusts are peaked at about 1000 LST. The presence of a non-diurnal cycle of four days has been noticed and might be associated with synoptic systems acting on the region. A simple heuristic formula was proposed to compute Lagrangian time-scale from Eulerian time-scale, and from which we compute the Lagragian standard deviation, a final product to be used as input in diffusion models.

  13. Harnessing Wind

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    China’s wind power industry shifts into full gear The global oil crunch and environmental degradation have given rise to an ardent search for alternative and green energies throughout the world. For China, wind power is a choice one and its development is sizzling hot backed by

  14. Comparative Experimental Research on Concrete Surface Treatment Materials Resistance to Wind Erosion%混凝土抗风蚀磨损表面强化处理材料的对比试验研究

    Institute of Scientific and Technical Information of China (English)

    章岩; 王起才; 张粉芹; 马华军

    2012-01-01

    The second double-track section in Xinjiang of Lanzhou-Xinjiang Railway crosses the five most powerful wind areas of the nine wind areas in Xinjiang. For wind erosion to the railway concrete structure, by means of abrasion resistance and hydrophobicity tests, four kinds of concrete surface treatment materials were chosen to carried through research to improve the abrasion resistance of concrete surface. The results show that four kinds of surface treatment materials can all improve the abrasion resistance of concrete surface to wind erosion. Among which, permeable composite latex concrete surface treatment material has comprehensive advantages in abrasion resistance, hydrophobicity and price. It can penetrate through the surface of concrete by surface seepage method and react with concrete to form a dense hydrophobic net structure on the surface to achieve the effects of protection and resistance to wind erosion. It can improve the abrasion resistance of concrete surface more than doubled, and the surface drying time is reduced 99. 35%. It has better effect in anti-ultraviolet, anti-cracking and anti-freezing, etc.%兰新铁路第二双线新疆段穿越新疆九大风区中风力最强的五大风区.针对风蚀对铁路混凝土结构物的磨蚀问题,选用4种表面强化材料,通过混凝土耐磨蚀和疏水性试验,进行提高混凝土表面耐风蚀性能研究.结果表明:4种表面强化材料均可提高混凝土表面的抗风蚀磨损能力;其中渗透性复合乳液型混凝土表面抗风蚀处理材料在提高混凝土的耐磨蚀性和疏水性以及价格方面具有综合优势,它通过表面渗透方式渗入混凝土中并和混凝土发生反应,在混凝土表面形成致密疏水的网状结构,达到防护和抗风蚀的效果,可提高混凝土表面耐磨度一倍多,表干时间缩短99.35%,且在抗紫外线、抗开裂、抗冻等方面均表现出较好的效果.

  15. Stellar Winds on the Main-Sequence I: Wind Model

    CERN Document Server

    Johnstone, C P; Lüftinger, T; Toth, G; Brott, I

    2015-01-01

    Aims: We develop a method for estimating the properties of stellar winds for low-mass main-sequence stars between masses of 0.4 and 1.1 solar masses at a range of distances from the star. Methods: We use 1D thermal pressure driven hydrodynamic wind models run using the Versatile Advection Code. Using in situ measurements of the solar wind, we produce models for the slow and fast components of the solar wind. We consider two radically different methods for scaling the base temperature of the wind to other stars: in Model A, we assume that wind temperatures are fundamentally linked to coronal temperatures, and in Model B, we assume that the sound speed at the base of the wind is a fixed fraction of the escape velocity. In Paper II of this series, we use observationally constrained rotational evolution models to derive wind mass loss rates. Results: Our model for the solar wind provides an excellent description of the real solar wind far from the solar surface, but is unrealistic within the solar corona. We run ...

  16. Wind energy.

    Science.gov (United States)

    Leithead, W E

    2007-04-15

    From its rebirth in the early 1980s, the rate of development of wind energy has been dramatic. Today, other than hydropower, it is the most important of the renewable sources of power. The UK Government and the EU Commission have adopted targets for renewable energy generation of 10 and 12% of consumption, respectively. Much of this, by necessity, must be met by wind energy. The US Department of Energy has set a goal of 6% of electricity supply from wind energy by 2020. For this potential to be fully realized, several aspects, related to public acceptance, and technical issues, related to the expected increase in penetration on the electricity network and the current drive towards larger wind turbines, need to be resolved. Nevertheless, these challenges will be met and wind energy will, very likely, become increasingly important over the next two decades. An overview of the technology is presented.

  17. Wind Pressure Characteristics at Windward Side of Long-Span Cantilevered Roof by Wind Tunnel Test

    Institute of Scientific and Technical Information of China (English)

    XIAN Rong; LIAO Hai-li; LI Ming-shui

    2009-01-01

    A rigid mode of long-span cantilevered roof was tested in wind tunnel.By analyzing the relation between wind angle and wind pressure coefficient and the relation between wind angle and wind shape factor,we found that 90° is the most disadvantageous wind angle.Furthermore,the fluctuation of wind pressure at the windward edge was reflected by power spectrum density (PSD) and coherence function.The correlation coefficients of measuring points on outer and inner surfaces verifys that the largest lift force was produced at 90°.

  18. Measuring and modelling of the wind on the scale of tall wind turbines

    DEFF Research Database (Denmark)

    Floors, Rogier Ralph

    and the negative wind speed bias at larger heights were not improved when a different synoptic forcing and a different vertical resolution were used in the model. The effect of baroclinity was explored for the two sites. The surface geostrophic wind, the gradient wind and the thermal wind were derived from...... simulations with a mesoscale model. In both locations the thermal wind up to 970 m was approximately Gaussianly distributed with a standard deviation of three m s−1 and the thermal wind vector varied seasonally due to temperature differences between sea and land. The wind veer was particularly sensitive...

  19. Lessons Learned from the Deployment and Integration of a Microwave Sounder Based Tropical Cyclone Intensity and Surface Wind Estimation Algorithm into NOAA/NESDIS Satellite Product Operations

    Science.gov (United States)

    Longmore, S. P.; Knaff, J. A.; Schumacher, A.; Dostalek, J.; DeMaria, R.; Chirokova, G.; Demaria, M.; Powell, D. C.; Sigmund, A.; Yu, W.

    2014-12-01

    The Colorado State University (CSU) Cooperative Institute for Research in the Atmosphere (CIRA) has recently deployed a tropical cyclone (TC) intensity and surface wind radii estimation algorithm that utilizes Suomi National Polar-orbiting Partnership (S-NPP) satellite Advanced Technology Microwave Sounder (ATMS) and Advanced Microwave Sounding Unit (AMSU) from the NOAA18, NOAA19 and METOPA polar orbiting satellites for testing, integration and operations for the Product System Development and Implementation (PSDI) projects at NOAA's National Environmental Satellite, Data, and Information Service (NESDIS). This presentation discusses the evolution of the CIRA NPP/AMSU TC algorithms internally at CIRA and its migration and integration into the NOAA Data Exploitation (NDE) development and testing frameworks. The discussion will focus on 1) the development cycle of internal NPP/AMSU TC algorithms components by scientists and software engineers, 2) the exchange of these components into the NPP/AMSU TC software systems using the subversion version control system and other exchange methods, 3) testing, debugging and integration of the NPP/AMSU TC systems both at CIRA/NESDIS and 4) the update cycle of new releases through continuous integration. Lastly, a discussion of the methods that were effective and those that need revision will be detailed for the next iteration of the NPP/AMSU TC system.

  20. Spatial distribution of surface rock fragment on hillslopes in a small catchment in wind-water erosion crisscross region of the Loess Plateau

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The cover and size distributions of surface rock fragment in hillslopes were investigated by using digital photographing and treating technique in a small catchment in wind-water erosion crisscross region of the Loess Plateau. The results indicated that the maximal cover of rock fragment was pre-sented at mid-position in steep hillslope. Rock fragment presented a general decreasing-trend along the hillslope in gentle hillslope. Rock fragment cover was positively related to gradient, rock fragment size decreased generally along the hillslope, and the size reduced with the gradient. The mean size of rock fragment was at a range of 6―20 mm in the steep hillslope, rock fragment size > 50 mm was rarely presented. The covers of rock fragment at different positions were markedly related to the quantities of rock fragment < 40 mm. The area of rock fragment of 2―50 mm accounted for 60% or more of the total area, dominating the distribution of rock fragment in the hillslopes.

  1. First-principles modeling of geomagnetically induced electromagnetic fields and currents from upstream solar wind to the surface of the Earth

    Directory of Open Access Journals (Sweden)

    A. Pulkkinen

    2007-05-01

    Full Text Available Our capability to model the near-space physical phenomena has gradually reached a level enabling module-based first-principles modeling of geomagnetically induced electromagnetic fields and currents from upstream solar wind to the surface of the Earth. As geomagnetically induced currents (GIC pose a real threat to the normal operation of long conductor systems on the ground, such as high-voltage power transmission systems, it is quite obvious that success in accurate predictive modeling of the phenomenon would open entirely new windows for operational space weather products.

    Here we introduce a process for obtaining geomagnetically induced electromagnetic fields and currents from the output of global magnetospheric MHD codes. We also present metrics that take into account both the complex nature of the signal and possible forecasting applications of the modeling process. The modeling process and the metrics are presented with the help of an actual example space weather event of 24–29 October 2003. Analysis of the event demonstrates that, despite some significant shortcomings, some central features of the overall ionospheric current fluctuations associated with GIC can be captured by the modeling process. More specifically, the basic spatiotemporal morphology of the modeled and "measured" GIC is quite similar. Furthermore, the presented user-relevant utility metrics demonstrate that MHD-based modeling can outperform simple GIC persistence models.

  2. How supernovae launch galactic winds?

    Science.gov (United States)

    Fielding, Drummond; Quataert, Eliot; Martizzi, Davide; Faucher-Giguère, Claude-André

    2017-09-01

    We use idealized three-dimensional hydrodynamic simulations of global galactic discs to study the launching of galactic winds by supernovae (SNe). The simulations resolve the cooling radii of the majority of supernova remnants (SNRs) and thus self-consistently capture how SNe drive galactic winds. We find that SNe launch highly supersonic winds with properties that agree reasonably well with expectations from analytic models. The energy loading (η _E= \\dot{E}_wind/ \\dot{E}_SN) of the winds in our simulations are well converged with spatial resolution while the wind mass loading (η _M= \\dot{M}_wind/\\dot{M}_\\star) decreases with resolution at the resolutions we achieve. We present a simple analytic model based on the concept that SNRs with cooling radii greater than the local scaleheight break out of the disc and power the wind. This model successfully explains the dependence (or lack thereof) of ηE (and by extension ηM) on the gas surface density, star formation efficiency, disc radius and the clustering of SNe. The winds our simulations are weaker than expected in reality, likely due to the fact that we seed SNe preferentially at density peaks. Clustering SNe in time and space substantially increases the wind power.

  3. Some challenges of wind modelling for modern wind turbines: The Weibull distribution

    OpenAIRE

    Gryning, Sven-Erik; Batchvarova, Ekatarina; Floors, Rogier; Pena Diaz, Alfredo

    2012-01-01

    Wind power assessments, as well as forecast of wind energy production, are key issues in wind energy and grid related studies. However the hub height of today’s wind turbines is well above the surface layer. Wind profiles studies based on mast data show that the wind profile above the surface layer depends on the planetary boundary layer (PBL) structure and height, thus parameters that are not accounted for in today’s traditional applied flow simulation models and parameterizations. Here we r...

  4. Satellite Remote Sensing in Offshore Wind Energy

    DEFF Research Database (Denmark)

    Hasager, Charlotte Bay; Badger, Merete; Astrup, Poul

    2013-01-01

    Satellite remote sensing of ocean surface winds are presented with focus on wind energy applications. The history on operational and research-based satellite ocean wind mapping is briefly described for passive microwave, scatterometer and synthetic aperture radar (SAR). Currently 6 GW installed...

  5. Sensitivity of Southern Ocean circulation to wind stress changes: Role of relative wind stress

    OpenAIRE

    Munday, D.R.; Zhai, X.

    2015-01-01

    The influence of different wind stress bulk formulae on the response of the Southern Ocean circulation to wind stress changes is investigated using an idealised channel model. Surface/mixed layer properties are found to be sensitive to the use of the relative wind stress formulation, where the wind stress depends on the difference between the ocean and atmosphere velocities. Previous work has highlighted the surface eddy damping effect of this formulation, which we find leads to increased cir...

  6. New method of sea surface wind speed retrieval using genetic algorithms and neural network%基于遗传神经网络算法的海面风速反演新方法

    Institute of Scientific and Technical Information of China (English)

    石汉青; 张雷; 杜华栋; 龙智勇; 姜世泰

    2013-01-01

    There exist the complexity of sea surface and the limitation of theoretical model of electromagnet-ic scattering,and nonlinear phenomena in the retrieval of sea surface wind speed,which is based on syn-thetic aperture radar (SAR)images.With the method of genetic neural network and Fletcher-Reeves,this paper established a new model of retrieving wind speed based on operational data of CMOD4 model func-tion.The result shows that this model is available in retrieving ocean surface wind.When random error is less than 10%,this model has high denoising ability and the accuracy of the retrieved ocean surface wind speed is ideal.Comparing the results of different wind speed,shows that in the case of low or middle wind,the fitness of learning model and the accuracy of predicted tests have both ideal accuracy,and that in the case of strong wind,the inversion result of this model is comparatively poor.%针对海面运动的复杂性、海面电磁散射理论模型的局限性以及利用 SAR 图像反演海面风速存在的非线性现象,基于遗传神经网络的方法,以业务化的 CMOD4模式函数数据为基础,采用 Fletcher-Reeves 算法的变梯度反向传播算法,建立一种 SAR 风速反演的新模型。试验结果表明,利用遗传神经网络方法反演海面风速是可行的,当随机误差小于10%时,模型的抗噪能力较强,风速反演的精度较为理想。比较不同风速下的反演结果可以发现,在中、小风速的情况下,模型的抗噪能力较强,模型学习拟合和预测检验的精度相对较高;在大风速的情况下,模型的反演能力有待于进一步提高。

  7. Liquid Metallic Hydrogen III. Intercalation and Lattice Exclusion Versus Gravitational Settling and Their Consequences Relative to Internal Structure, Surface Activity, and Solar Winds in the Sun

    Directory of Open Access Journals (Sweden)

    Robitaille P.-M.

    2013-04-01

    Full Text Available Invocation of a liquid metallic hydrogen model (Robitaille P.M. Liquid Metallic Hydro- gen: A Building Block for the Liquid Sun. Progr. Phys ., 2011, v. 3, 60–74; Robitaille P.M. Liquid Metallic Hydrogen II: A Critical Assessment of Current and Primordial He- lium Levels in Sun. Progr. Phys ., 2013, v. 2, 35–47 brings with it a set of advantages for understanding solar physics which will always remain unavailable to the gaseous models. Liquids characteristically act as solvents and incorporate solutes within their often fleeting structural matrix. They possess widely varying solubility products and often reject the solute altogether. In that case, the solute becomes immiscible. “Lattice exclusion” can be invoked for atoms which attempt to incorporate themselves into liquid metallic hydrogen. In order to conserve the integrity of its conduction bands, it is antic- ipated that a graphite-like metallic hydrogen lattice should not permit incorporation of other elements into its in-plane hexagonal hydrogen framework. Based on the physics observed in the intercalation compounds of graphite, non-hydrogen atoms within liq- uid metallic hydrogen could reside between adjacent hexagonal proton planes. Conse- quently, the forces associated with solubility products and associated lattice exclusion envisioned in liquid metallic hydrogen for solutes would restrict gravitational settling. The hexagonal metallic hydrogen layered lattice could provide a powerful driving force for excluding heavier elements from the solar body. Herein lies a new exfoliative force to drive both surface activity (flares, coronal mass ejections, prominences and solar winds with serious consequences relative to the p–p reaction and CNO cycle in the Sun. At the same time, the idea that non-hydrogen atomic nuclei can exist between layers of metallic hydrogen leads to a fascinating array of possibilities with respect to nucleosyn- thesis. Powerful parallels can be drawn to the

  8. Wind Energy

    Energy Technology Data Exchange (ETDEWEB)

    Beurskens, H.J.M. [SET Analysis, Kievitlaan 26, 1742 AD Schagen (Netherlands); Brand, A.J. [Energy research Centre of the Netherlands ECN, Unit Wind Energy, P.O. Box 1, 1755 ZG Petten (Netherlands)

    2013-02-15

    Over the years, wind energy has become a major source of renewable energy worldwide. The present chapter addresses the wind resource, which is available for exploitation for large-scale electricity production, and its specific physical properties. Furthermore, the technical options available to convert the energy of the air flow into mechanical energy and electricity are described. Specific problems of large-scale integration of wind energy into the grid as well as the present and future market developments are described in this chapter. Finally, environmental aspects are discussed briefly.

  9. Bringing satellite winds to hub-height

    DEFF Research Database (Denmark)

    Badger, Merete; Pena Diaz, Alfredo; Bredesen, Rolv Erlend

    2012-01-01

    Satellite observations of the ocean surface can provide detailed information about the spatial wind variability over large areas. This is very valuable for the mapping of wind resources offshore where other measurements are costly and sparse. Satellite sensors operating at microwave frequencies...... measure the amount of radar backscatter from the sea surface, which is a function of the instant wind speed, wind direction, and satellite viewing geometry. A major limitation related to wind retrievals from satellite observations is that existing empirical model functions relate the radar backscatter...

  10. Vertical axis wind turbine airfoil

    Science.gov (United States)

    Krivcov, Vladimir; Krivospitski, Vladimir; Maksimov, Vasili; Halstead, Richard; Grahov, Jurij Vasiljevich

    2012-12-18

    A vertical axis wind turbine airfoil is described. The wind turbine airfoil can include a leading edge, a trailing edge, an upper curved surface, a lower curved surface, and a centerline running between the upper surface and the lower surface and from the leading edge to the trailing edge. The airfoil can be configured so that the distance between the centerline and the upper surface is the same as the distance between the centerline and the lower surface at all points along the length of the airfoil. A plurality of such airfoils can be included in a vertical axis wind turbine. These airfoils can be vertically disposed and can rotate about a vertical axis.

  11. World Wind

    Data.gov (United States)

    National Aeronautics and Space Administration — World Wind allows any user to zoom from satellite altitude into any place on Earth, leveraging high resolution LandSat imagery and SRTM elevation data to experience...

  12. 风对南海波浪的能量输入及其长期变化%Wind energy input and its secular change of surface waves in the South China Sea

    Institute of Scientific and Technical Information of China (English)

    崔超然; 管玉平; 朱耀华; 王辉; 黄瑞新

    2016-01-01

    The energy of winds into surface waves in the South China Sea during 1871-2008 was estimated by using the ocean reanalysis data of SODA (simple ocean data assimilation) 2.2.4 (1871-2008). The results showed that the annual wind energy input is about 0.2 TW, and that the spatial pattern of this kind of input is mainly located in the northern parts of the South China Sea during winter and in the southern parts in summer;and the intensity of summer input is much weaker than that of winter. Similar results were obtained by using the ERA-40 (European Centre for Medium-Range Weather Forecasts re-analysis-40) (1957-2002) and ERA-20C (1900-2010) data sets. The secular trend of wind energy input into waves was reduced at the rate of 0.43%per year since 1950. We also studied the swells and wind waves, which are two categories of the waves, by using the ERA-interim data. The spatial pattern of wind energy input into the swells and wind waves is mainly located in the northern parts of the South China Sea, but there is also a high wind energy input into the wind waves area in the southern parts of the South China Sea. The secular trend of the wind energy input into swells was increasing, and the same trend of wind energy input into the wind waves was reducing; the total energy input was also reducing by the joint effect of swells and wind waves. All of this was thanks to the weakening East Asian monsoon, which dominated in the South China Sea, in recent decades. These results are significant for understanding the variation of the surface waves in the South China Sea.%利用美国的全球海洋同化资料SODA(simple ocean data assimilation)2.2.4(1871—2008)中的风应力数据,估算了风输入给南海波浪的能量。结果表明,风向南海波浪输入能量的年均值约为0.2TW,其空间分布冬季以南海北部为主,夏季以南部为主且强度比冬季要弱得多;风对南海波浪能量的输入一直呈减少趋势,用欧洲中期天气预

  13. Coastal Ohio Wind Project

    Energy Technology Data Exchange (ETDEWEB)

    Gorsevski, Peter; Afjeh, Abdollah; Jamali, Mohsin; Bingman, Verner

    2014-04-04

    reduced the wake size and enhanced the vortices in the flow downstream of the turbine-tower compared with the tower alone case. Mean and rms velocity distributions from hot wire anemometer data confirmed that in a downwind configuration, the wake of the tower dominates the flow, thus the flow fields of a tower alone and tower-turbine combinations are nearly the same. For the upwind configuration, the mean velocity shows a narrowing of the wake compared with the tower alone case. The downwind configuration wake persisted longer than that of an upwind configuration; however, it was not possible to quantify this difference because of the size limitation of the wind tunnel downstream of the test section. The water tunnel studies demonstrated that the scale model studies could be used to adequately produce accurate motions to model the motions of a wind turbine platform subject to large waves. It was found that the important factors that affect the platform is whether the platform is submerged or surface piercing. In the former, the loads on the platform will be relatively reduced whereas in the latter case, the structure pierces the wave free surface and gains stiffness and stability. The other important element that affects the movement of the platform is depth of the sea in which the wind turbine will be installed. Furthermore, the wildlife biology component evaluated migratory patterns by different monitoring systems consisting of marine radar, thermal IR camera and acoustic recorders. The types of radar used in the project are weather surveillance radar and marine radar. The weather surveillance radar (1988 Doppler), also known as Next Generation Radar (NEXRAD), provides a network of weather stations in the US. Data generated from this network were used to understand general migratory patterns, migratory stopover habitats, and other patterns caused by the effects of weather conditions. At a local scale our marine radar was used to complement the datasets from NEXRAD and

  14. High Fidelity Computational and Wind Tunnel Models in Support of Certification Airworthiness of Control Surfaces with Freeplay and Other Nonlinear Features Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed work will establish high fidelity computational methods and wind tunnel test model in support of new freeplay criteria for the design, construction and...

  15. Wind Loads on Structures

    DEFF Research Database (Denmark)

    Dyrbye, Claes; Hansen, Svend Ole

    pressure to structural response) and design criteria. Starting with an introduction of the wind load chain, the book moves on to meteorological considerations, atmospheric boundary layer, static wind load, dynamic wind load and scaling laws used in wind-tunnel tests. The dynamic wind load covers vibrations......Wind loads have to be taken into account when designing civil engineering structures. The wind load on structures can be systematised by means of the wind load chain: wind climate (global), terrain (wind at low height), aerodynamic response (wind load to pressure), mechanical response (wind...

  16. Wind Loads on Structures

    DEFF Research Database (Denmark)

    Dyrbye, Claes; Hansen, Svend Ole

    pressure to structural response) and design criteria. Starting with an introduction of the wind load chain, the book moves on to meteorological considerations, atmospheric boundary layer, static wind load, dynamic wind load and scaling laws used in wind-tunnel tests. The dynamic wind load covers vibrations......Wind loads have to be taken into account when designing civil engineering structures. The wind load on structures can be systematised by means of the wind load chain: wind climate (global), terrain (wind at low height), aerodynamic response (wind load to pressure), mechanical response (wind...

  17. Flatback airfoil wind tunnel experiment.

    Energy Technology Data Exchange (ETDEWEB)

    Mayda, Edward A. (University of California, Davis, CA); van Dam, C.P. (University of California, Davis, CA); Chao, David D. (University of California, Davis, CA); Berg, Dale E.

    2008-04-01

    A computational fluid dynamics study of thick wind turbine section shapes in the test section of the UC Davis wind tunnel at a chord Reynolds number of one million is presented. The goals of this study are to validate standard wind tunnel wall corrections for high solid blockage conditions and to reaffirm the favorable effect of a blunt trailing edge or flatback on the performance characteristics of a representative thick airfoil shape prior to building the wind tunnel models and conducting the experiment. The numerical simulations prove the standard wind tunnel corrections to be largely valid for the proposed test of 40% maximum thickness to chord ratio airfoils at a solid blockage ratio of 10%. Comparison of the computed lift characteristics of a sharp trailing edge baseline airfoil and derived flatback airfoils reaffirms the earlier observed trend of reduced sensitivity to surface contamination with increasing trailing edge thickness.

  18. An improved canopy wind model for predicting wind adjustment factors and wildland fire behavior

    Science.gov (United States)

    W. J. Massman; J. M. Forthofer; M. A. Finney

    2017-01-01

    The ability to rapidly estimate wind speed beneath a forest canopy or near the ground surface in any vegetation is critical to practical wildland fire behavior models. The common metric of this wind speed is the "mid-flame" wind speed, UMF. However, the existing approach for estimating UMF has some significant shortcomings. These include the assumptions that...

  19. Wind profile modelling using WAsP and "tall" wind measurements

    DEFF Research Database (Denmark)

    Floors, Rogier Ralph; Kelly, Mark C.; Troen, Ib

    2015-01-01

    A and B in the geostrophic drag law was taken into account by specifying a mean offset between the thermal and surface geostrophic wind vector and a mean magnitude of the thermal wind vector. Wind lidar and mast measurements from 11 different sites (that were not used in determining the empirical...

  20. ENSO Ocean Energetics and Observational Wind Power

    Science.gov (United States)

    Kodama, K.; Burls, N.

    2016-12-01

    The viability of wind power as a potential predictor for ENSO state has previously only been investigated in models. Here we use satellite data to obtain observational equatorial wind power which is then decomposed into climatological (ucτc), mixed-mean-perturbation (ucτ' and u'τc), and perturbation (u'τ') components to compare with the wind power/SST relationship seen in the models. The observational wind power components are also used to compare predictive skill with that of their dynamical counterparts-heat content and wind stress-which are more widely accepted and studied as ENSO predictors. The wind power decomposition reveals the u'τ' perturbation component primarily acts as a damping term. We find that the most robust relationship between wind power and SST arises from the u'τc component computed from the perturbation surface currents and climatological wind stress. u'τc is significantly correlated with the Nino 3.4 index and leads by as many as six months, capturing the role of ocean memory. The wind power decomposition highlights exactly how surface currents can weight the contribution of the winds to have more or less of an effect on the ocean state depending on the whether currents and wind stress act together or oppose each other, illustrating that not all wind anomalies are created equal.

  1. Mars - Wind friction speeds for particle movement

    Science.gov (United States)

    Greeley, R.; Leach, R.; White, B.; Iversen, J.; Pollack, J.

    1976-01-01

    Wind friction threshold speeds for particle movement were determined in a low pressure boundary layer wind tunnel at an atmospheric pressure of 5.3 mb. The results imply that for comparable pressures on Mars, the minimum wind friction threshold speed is about 2.5 m/sec, which would require free-stream winds of 50 to 135 m/sec, depending on the character of the surface and the atmospheric conditions. The corresponding wind speeds at the height of the Viking lander meteorology instrument would be about a factor of two less than the free-stream wind speed. The particle size most easily moved by winds on Mars is about 160 microns; particles both larger and smaller than this (at least down to about 5 microns) require stronger winds to initiate movement.

  2. Wind Generators

    Science.gov (United States)

    1989-01-01

    When Enerpro, Inc. president, Frank J. Bourbeau, attempted to file a patent on a system for synchronizing a wind generator to the electric utility grid, he discovered Marshall Space Flight Center's Frank Nola's power factor controller. Bourbeau advanced the technology and received a NASA license and a patent for his Auto Synchronous Controller (ASC). The ASC reduces generator "inrush current," which occurs when large generators are abruptly brought on line. It controls voltage so the generator is smoothly connected to the utility grid when it reaches its synchronous speed, protecting the components from inrush current damage. Generator efficiency is also increased in light winds by applying lower than rated voltage. Wind energy is utilized to drive turbines to generate electricity for utility companies.

  3. Three-Dimensional Wind Profiling of Offshore Wind Energy Areas With Airborne Doppler Lidar

    Science.gov (United States)

    Koch, Grady J.; Beyon, Jeffrey Y.; Cowen, Larry J.; Kavaya, Michael J.; Grant, Michael S.

    2014-01-01

    A technique has been developed for imaging the wind field over offshore areas being considered for wind farming. This is accomplished with an eye-safe 2-micrometer wavelength coherent Doppler lidar installed in an aircraft. By raster scanning the aircraft over the wind energy area (WEA), a three-dimensional map of the wind vector can be made. This technique was evaluated in 11 flights over the Virginia and Maryland offshore WEAs. Heights above the ocean surface planned for wind turbines are shown to be within the marine boundary layer, and the wind vector is seen to show variation across the geographical area of interest at turbine heights.

  4. Three-dimensional wind profiling of offshore wind energy areas with airborne Doppler lidar

    Science.gov (United States)

    Koch, Grady J.; Beyon, Jeffrey Y.; Cowen, Larry J.; Kavaya, Michael J.; Grant, Michael S.

    2014-01-01

    A technique has been developed for imaging the wind field over offshore areas being considered for wind farming. This is accomplished with an eye-safe 2-μm wavelength coherent Doppler lidar installed in an aircraft. By raster scanning the aircraft over the wind energy area (WEA), a three-dimensional map of the wind vector can be made. This technique was evaluated in 11 flights over the Virginia and Maryland offshore WEAs. Heights above the ocean surface planned for wind turbines are shown to be within the marine boundary layer, and the wind vector is seen to show variation across the geographical area of interest at turbine heights.

  5. Preliminary wind tunnel tests on the pedal wind turbine

    Science.gov (United States)

    Vinayagalingam, T.

    1980-06-01

    High solidity-low speed wind turbines are relatively simple to construct and can be used advantageously in many developing countries for such direct applications as water pumping. Established designs in this class, such as the Savonius and the American multiblade rotors, have the disadvantage that their moving surfaces require a rigid construction, thereby rendering large units uneconomical. In this respect, the pedal wind turbine recently reported by the author and which incorporates sail type rotors offers a number of advantages. This note reports preliminary results from a series of wind tunnel tests which were carried out to assess the aerodynamic torque and power characteristics of the turbine.

  6. Remote Sensing Wind and Wind Shear System.

    Science.gov (United States)

    Contents: Remote sensing of wind shear and the theory and development of acoustic doppler; Wind studies; A comparison of methods for the remote detection of winds in the airport environment; Acoustic doppler system development; System calibration; Airport operational tests.

  7. Offshore wind mapping Mediterranean area using SAR

    DEFF Research Database (Denmark)

    Calaudi, Rosamaria; Arena, Felice; Badger, Merete;

    2013-01-01

    Satellite observations of the ocean surface, for example from Synthetic Aperture Radars (SAR), provide information about the spatial wind variability over large areas. This is of special interest in the Mediterranean Sea, where spatial wind information is only provided by sparse buoys, often...... with long periods of missing data. Here, we focus on evaluating the use of SAR for offshore wind mapping. Preliminary results from the analysis of SAR-based ocean winds in Mediterranean areas show interesting large scale wind flow features consistent with results from previous studies using numerical models...

  8. Early wind engineering experiments in Denmark

    DEFF Research Database (Denmark)

    Larose, Guy; Franck, Niels

    1997-01-01

    A review of works by Danish wind engineers is presented to commemorate the 100th year anniversary of the first wind tunnel experiments. Pioneer tests by Irminger and Nøkkentved in "artificial" wind on scaled models are described. The early experiments aimed at measuring the surface pressure...... distribution around bodies ranging from bird wings to buildings. The experiments shed light on the importance of suction on the overall wind loading. Martin Jensen combined field measurements of pressure distributions to model scale experiments to write "The Model-Law for Phenomena in Natural Wind...

  9. The wind speed profile at offshore wind farm sites

    Science.gov (United States)

    Lange, B.; Larsen, S. E.; Højstrup, J.; Barthelmie, R.

    2003-04-01

    The first large offshore wind farms are in the planning phase in several countries in Europe. Their economic viability depends on the favourable wind conditions compared to sites on land. The higher energy yield has to compensate the additional installation and maintenance cost. For project planning and siting a reliable prediction of the wind resource is therefore crucial. For turbine design the wind shear of the marine surface layer is an important design parameter, especially since the growing rotor diameter makes turbines more vulnerable for spatial wind speed variations. Compared to land surfaces the roughness of water is very low. It is commonly described either as a constant (as in the wind resource estimation program WAsP) or by means of the Charnock approach, relating sea surface roughness and friction velocity. While this relation works well for the open oceans it has been found inappropriate for coastal areas where waves are not fully developed. Information about the wave field is needed to model the sea surface roughness more accurately (see e.g. Johnson et al. (1998)). The atmospheric stability differs greatly between land and water areas. It is more important offshore compared to land sites due to the low surface roughness of water. The main influence of the atmospheric stability is on the vertical momentum transport, which is reflected in the vertical wind speed profile. It is usually described with Monin-Obukhov similarity theory. However, other effects not described by this approach might also play an important role: For offshore flow the flow regime at coastal sites is affected by the land-sea discontinuity (Højstrup, 1999). An internal boundary layer develops at the coastline and an inhomogeneous flow field might develop in the coastal zone, especially in stable stratification (see e.g. (Smedman et al. (1997)) Recent data from the measurement at Rødsand, 10 km off the Danish coast in the Baltic Sea, include simultaneous wind and wave data from

  10. Wind Energy Japan

    Energy Technology Data Exchange (ETDEWEB)

    Komatsubara, Kazuyo [Embassy of the Kingdom of the Netherlands, Tokyo (Japan)

    2012-06-15

    An overview is given of wind energy in Japan: Background; Wind Energy in Japan; Japanese Wind Energy Industry; Government Supports; Useful Links; Major Japanese Companies; Profiles of Major Japanese Companies; Major Wind Energy Projects in Japan.

  11. The Relevance of Surface Roughness Data Qualities in Diagnostic Modeling of Wind Velocity in Complex Terrain: A Case Study from the Śnieżnik Massif (SW Poland)

    Science.gov (United States)

    Jancewicz, Kacper; Szymanowski, Mariusz

    2017-02-01

    Numerical modeling of wind velocity above complex terrain has become a subject of numerous contemporary studies. Regardless of the methodical approach (dynamic or diagnostic), it can be observed that information about surface roughness is indispensable to achieve realistic results. In this context, the current state of GIS and remote sensing development allows access to a number of datasets providing information about various properties of land coverage in a broad spectrum of spatial resolution. Hence, the quality of roughness information may vary depending on the properties of primary land coverage data. As a consequence, the results of the wind velocity modeling are affected by the accuracy and spatial resolution of roughness data. This paper describes further attempts to model wind velocity using the following sources of roughness information: LiDAR data (Digital Surface Model and Digital Terrain Model), database of topographical objects (BDOT10k) and both raster and vector versions of Corine Land Cover 2006 (CLC). The modeling was conducted in WindStation 4.0.2 software which is based on the computational fluid dynamics (CFD) diagnostic solver Canyon. Presented experiment concerns three episodes of relatively strong and constant synoptic forcing: 26 November 2011, 25 May 2012 and 26 May 2012. The modeling was performed in the spatial resolution of 50 and 100 m. Input anemological data were collected during field measurements while the atmosphere boundary layer parameters were derived from the meteorological stations closest to the study area. The model's performance was verified using leave-one-out cross-validation and calculation of error indices such as bias error, root mean square error and index of wind speed. Thus, it was possible to compare results of using roughness datasets of different type and resolution. The study demonstrates that the use of LiDAR-based roughness data may result in an improvement of the model's performance in 100 and 50 m resolution

  12. The dune effect on sand-transporting winds on Mars

    Science.gov (United States)

    Jackson, Derek W. T.; Bourke, Mary C.; Smyth, Thomas A. G.

    2015-11-01

    Wind on Mars is a significant agent of contemporary surface change, yet the absence of in situ meteorological data hampers the understanding of surface-atmospheric interactions. Airflow models at length scales relevant to landform size now enable examination of conditions that might activate even small-scale bedforms (ripples) under certain contemporary wind regimes. Ripples have the potential to be used as modern `wind vanes' on Mars. Here we use 3D airflow modelling to demonstrate that local dune topography exerts a strong influence on wind speed and direction and that ripple movement likely reflects steered wind direction for certain dune ridge shapes. The poor correlation of dune orientation with effective sand-transporting winds suggests that large dunes may not be mobile under modelled wind scenarios. This work highlights the need to first model winds at high resolution before inferring regional wind patterns from ripple movement or dune orientations on the surface of Mars today.

  13. The dune effect on sand-transporting winds on Mars.

    Science.gov (United States)

    Jackson, Derek W T; Bourke, Mary C; Smyth, Thomas A G

    2015-11-05

    Wind on Mars is a significant agent of contemporary surface change, yet the absence of in situ meteorological data hampers the understanding of surface-atmospheric interactions. Airflow models at length scales relevant to landform size now enable examination of conditions that might activate even small-scale bedforms (ripples) under certain contemporary wind regimes. Ripples have the potential to be used as modern 'wind vanes' on Mars. Here we use 3D airflow modelling to demonstrate that local dune topography exerts a strong influence on wind speed and direction and that ripple movement likely reflects steered wind direction for certain dune ridge shapes. The poor correlation of dune orientation with effective sand-transporting winds suggests that large dunes may not be mobile under modelled wind scenarios. This work highlights the need to first model winds at high resolution before inferring regional wind patterns from ripple movement or dune orientations on the surface of Mars today.

  14. Wind Tunnel Tests for Wind Pressure Distribution on Gable Roof Buildings

    Science.gov (United States)

    2013-01-01

    Gable roof buildings are widely used in industrial buildings. Based on wind tunnel tests with rigid models, wind pressure distributions on gable roof buildings with different aspect ratios were measured simultaneously. Some characteristics of the measured wind pressure field on the surfaces of the models were analyzed, including mean wind pressure, fluctuating wind pressure, peak negative wind pressure, and characteristics of proper orthogonal decomposition results of the measured wind pressure field. The results show that extremely high local suctions often occur in the leading edges of longitudinal wall and windward roof, roof corner, and roof ridge which are the severe damaged locations under strong wind. The aspect ratio of building has a certain effect on the mean wind pressure coefficients, and the effect relates to wind attack angle. Compared with experimental results, the region division of roof corner and roof ridge from AIJ2004 is more reasonable than those from CECS102:2002 and MBMA2006.The contributions of the first several eigenvectors to the overall wind pressure distributions become much bigger. The investigation can offer some basic understanding for estimating wind load distribution on gable roof buildings and facilitate wind-resistant design of cladding components and their connections considering wind load path. PMID:24082851

  15. Wind tunnel tests for wind pressure distribution on gable roof buildings.

    Science.gov (United States)

    Jing, Xiao-kun; Li, Yuan-qi

    2013-01-01

    Gable roof buildings are widely used in industrial buildings. Based on wind tunnel tests with rigid models, wind pressure distributions on gable roof buildings with different aspect ratios were measured simultaneously. Some characteristics of the measured wind pressure field on the surfaces of the models were analyzed, including mean wind pressure, fluctuating wind pressure, peak negative wind pressure, and characteristics of proper orthogonal decomposition results of the measured wind pressure field. The results show that extremely high local suctions often occur in the leading edges of longitudinal wall and windward roof, roof corner, and roof ridge which are the severe damaged locations under strong wind. The aspect ratio of building has a certain effect on the mean wind pressure coefficients, and the effect relates to wind attack angle. Compared with experimental results, the region division of roof corner and roof ridge from AIJ2004 is more reasonable than those from CECS102:2002 and MBMA2006.The contributions of the first several eigenvectors to the overall wind pressure distributions become much bigger. The investigation can offer some basic understanding for estimating wind load distribution on gable roof buildings and facilitate wind-resistant design of cladding components and their connections considering wind load path.

  16. Effects of surface roughness and cross-sectional distortions on the wind-induced response of bridge cables in dry conditions

    DEFF Research Database (Denmark)

    Matteoni, Giulia; Georgakis, Christos T.

    Theoretical and experimental investigations to date assumed that bridge stay cables can be modelled as ideal circular cylinders and that their aerodynamic coefficients are invariant with wind angle-of-attack. These changes are neglected when the potential for bridge cable instability is evaluated...

  17. The Effect of Heat Waves and Drought on Surface Wind Circulations in the Northeast of the Iberian Peninsula during the Summer of 2003

    NARCIS (Netherlands)

    Jiménez, P.A.; Vilà-Guerau de Arellano, J.; González-Rouco, J.F.; Navarro, J.; Montávez, J.P.; García-Bustamante, E.; Dudhia, J.

    2011-01-01

    Variations in the diurnal wind pattern associated with heat waves and drought conditions are investigated climatologically at a regional level (northeast of the Iberian Peninsula). The study, based on high-density observational evidence and fine spatial-scale mesoscale modeling for the 1992–2004 per

  18. 散射计海面非气旋风场块状模糊去除方法%Ocean Surface Non-cyclone Wind Block Ambiguity Removal Algorithm for Scatterometer

    Institute of Scientific and Technical Information of China (English)

    安大伟; 谷松岩; 杨忠东; 陆风

    2012-01-01

    need no statistical circular histogram, nor do they need to calculate the mean. Third, the definition of circular median is only one rather than getting multiple solutions. And last, the calculation will not be interrupted by the narrow wind element values in the boundary region. The enhanced circular median filtering method based on non-cyclone wind field vector distribution characteristics can overcome the harsh conditions of the traditional method (such as wind field must be randomly distributed, non-block fuzzy), extracting the true wind vector solutions to overcome the fuzzy block. In order to apply this method widely, a crucial issue is to determine and eliminate the coverage typhoon cloud by operational satellite equipment properly. The method provides a new idea for exacting data of non-cyclone wind field on the ocean surface.%利用最大似然法(MLE)对散射计数据反演得出的风矢量,一般存在多个模糊解,故需采用圆中数滤波法进行模糊去除.但传统圆中数滤波法难以解决风场反演中块状模糊问题.该文根据散射计非气旋性第1风场的空间分布特性,归纳出一套适合散射计的加强型圆中数滤波块状模糊去除方法,并探讨了其适应性.该方法定义简单,计算量小,且易收敛.利用欧洲EUMETSAT提供的部分ASCAT( Advanced SCATterometer) L2原始数据对该方法进行验证结果表明,对于非气旋风场分布情况,该方法在利用其他工具去除台风气旋覆盖区域后,能有效解决非气旋区域风场块状模糊问题.

  19. Solitary Dunes under Bimodal Winds

    Science.gov (United States)

    Reffet, Erwan; Courrech du Pont, S.; Hersen, P.; Fulchignoni, M.; Douady, S.

    2009-01-01

    The high resolution and coverage achieved on Mars' surface have detailed lots of sand dunes of various types [1]. Many are reported as barchan or barchanoid dunes and present a diversity of shape ascribed to compound wind regimes, collisions or cementation. This diversity reminds us that aeolian structures are fairly complex. Although dunes have been extensively observed and documented, the conditions of their formation and evolution are still difficult to study because of the long time required for their development and their large length-scale. We developed a laboratory approach using underwater experiments to study the morphology of dunes. This method has been used successfully to reproduce various types of dunes downsized to a few centimeters. Barchan dunes are formed using a unidirectional wind-equivalent regime on a pile of ceramic sand-sized grains [2]. Changing the wind regime to a more complex one reveals other structures. In the case of multiple wind directions star dunes can be observed. A bimodal wind regime, e.g. switching between two distinct directions, over an homogeneous layer of sand leads to transverse, longitudinal or complex compound sandbeds depending on the angle between these wind directions [3]. Here, we apply bimodal wind regimes to isolated patches of sand in order to observe the variation of morphology of the resulting dunes. We present the barchanoid dunes obtained for various angles of bimodal wind and show the transition to the "chestnut” dunes type. We also investigate sudden variations in wind direction over a barchan dune. Therefore, we illustrate how the (not so) simple barchan shape can be affected by a more complex wind regime and give a new insight in understanding dunes on Mars. [1] http://www.mars-dunes.org/ . [2] Hersen et al. PRL, 2003. [3] Reffet et al. pldu.work 2008.

  20. Wind Atlas Analysis and Application Program: WAsP 11 Help Facility

    DEFF Research Database (Denmark)

    2014-01-01

    The Wind Atlas Analysis and Application Program (WAsP) is a PC-program for horizontal and vertical extrapolation of wind climates. The program contains a complete set of models to calculate the effects on the wind of sheltering obstacles, surface roughness changes and terrain height variations....... The analysis part consists of a transformation of an observed wind climate (wind speed and direction distributions) to a generalised wind climate (wind atlas data set). The generalised wind climate can subsequently be applied for estimation of the wind climate and wind power potential, as well as for siting...

  1. Geophysical limits to global wind power

    Science.gov (United States)

    Marvel, Kate; Kravitz, Ben; Caldeira, Ken

    2013-02-01

    There is enough power in Earth's winds to be a primary source of near-zero-emission electric power as the global economy continues to grow through the twenty-first century. Historically, wind turbines are placed on Earth's surface, but high-altitude winds are usually steadier and faster than near-surface winds, resulting in higher average power densities. Here, we use a climate model to estimate the amount of power that can be extracted from both surface and high-altitude winds, considering only geophysical limits. We find wind turbines placed on Earth's surface could extract kinetic energy at a rate of at least 400TW, whereas high-altitude wind power could extract more than 1,800TW. At these high rates of extraction, there are pronounced climatic consequences. However, we find that at the level of present global primary power demand (~ 18TW ref. ), uniformly distributed wind turbines are unlikely to substantially affect the Earth's climate. It is likely that wind power growth will be limited by economic or environmental factors, not global geophysical limits.

  2. Wind turbines

    OpenAIRE

    Jorge, Clàudia; Stuer, Joris; Mahy, Philip; Hawksley, Will

    2013-01-01

    The European Project Semester is about much more than a period of study, it is an opportunity to explore new surroundings and embrace new cultures, all while studying in a unique environment with a blend of people from diff erent disciplines. Our project, put together with the help of our supervisor Gunther Steenackers fi nds three product developers and one ICT engineer coming together to work on a project for an urban wind turbine. Our Aim is as follows: “We wi...

  3. Wind conditions for wind turbine design

    Energy Technology Data Exchange (ETDEWEB)

    Maribo Pedersen, B.

    1999-04-01

    Delegates from Europe and USA attended the meeting and discussed general aspects of wind conditions for wind turbine design. The subjects and the presented papers covered a very broad range of aspects of wind conditions and related influence on the wind turbine. (EHS)

  4. Seasonal Variability of Wind Climate in Hungary

    Directory of Open Access Journals (Sweden)

    PÉLINÉ NÉMETH, Csilla

    2011-01-01

    Full Text Available One of the most important effects of climate variability and climate change may comefrom changes in the intensity and frequency of climatic extremes. Responding to the need of newclimatologic analyses, complex wind field research was carried out to study and provide reliableinformation about the state and variability of wind climate in Hungary. First of all, special attentionwas paid on creation of a high quality, homogeneous data series. The research is based on 36-yearlong(1975–2010 wind data series of 36 Hungarian synoptic meteorological stations. The means andextremes of near-surface wind conditions assist in estimating the regional effects of climate change,therefore a complex wind climate analysis was carried out. Spatial and temporal distribution of meanand extreme wind characteristics were estimated; wind extremes and trends were interpolated andmapped over the country. Furthermore, measured and ERA Interim reanalysis data were compared inorder to estimate the effects of regional climate change.

  5. Wind shear test

    Science.gov (United States)

    Techniques for forecasting and detecting a type of wind shear called microbursts are being tested this month in an operational program at Denver's Stapleton International Airport as part of an effort to reduce hazards to airplanes and passengers.Wind shear, which can be spawned by convective storms, can occur as a microburst. These downbursts of cool air are usually recognizable as a visible rain shaft beneath a thundercloud. Sometimes, however, the rain shaft evaporates before reaching the ground, leaving the downdraft invisible. Although thunderstorms are traditionally avoided by airplane pilots, these invisible downdrafts also harbor hazards in what usually appear to be safe skies. When the downdraft reaches the earth's surface, the downdraft spreads out horizontally, much like a stream of water gushing from a garden hose on a concrete surface, explained John McCarthy, director of the operational program. Airplanes can encounter trouble when the downdraft from the microburst causes sudden shifts in wind direction, which may reduce lift on the wing, an especially dangerous situation during takeoff.

  6. SEA SURFACE HEIGHT (SSH) CHANGE AND ITS RELATIONSHIP WITH WIND STRESS IN THE NORTH PACIFIC OCEAN%北太平洋海表面高度(SSH)与风应力变化的关系

    Institute of Scientific and Technical Information of China (English)

    黄琳; 孙佳; 杨逸秋; 袁逸凡

    2013-01-01

    利用1958-2008年的北太平洋海表面高度和风应力资料,并与ENSO和PDO指数进行相关分析.结果发现,风应力及其经向分量主要通过季节振动影响海表面高度(SSH)的年周期变化,纬向风应力主要通过多年振动影响SSH的ENSO和PDO周期.纬向风应力和SSH均以黑潮延伸体主轴为界,两侧呈现出相反的升降趋势,SSH为北降南升,纬向风应力南降北升.风应力和SSH升降趋势相同,均表现为“上升—下降—上升”的变化特征.在地形变化剧烈、等深线南北分布的海区,西风增强会导致SSH升高,且西侧升高较为明显.北风增强将导致北太平洋西岸SSH升高,东岸SSH降低.%Correlation analysis between sea surface height, wind stress and index of ENSO and PDO for the period of 1958-2008 shows in the North Pacific Ocean, wind stress and its meridional component affect the annual cycle of SSH mainly through the seasonal vibration, and the zonal component affect the ENSO and PDO cycles of the SSH through years of vibration. Separated by the Kuroshio extension spindle, the zonal wind stress and SSH show different trends at the same side: SSH decreases at the north while increasing at the south, and the zonal wind stress decreases at the south while increasing at the north. Wind stress and SSH has the same trend: "increase-decrease-increase". The westerly enhanced the SSH rise in sea area where the topography is steep and isobaths distribute along the north-south direction, and the west side increased more significantly. The north wind enhancement led to SSH rise at the west coast of the North Pacific and drop at the east coast.

  7. Offshore wind speed and wind power characteristics for ten locations in Aegean and Ionian Seas

    Indian Academy of Sciences (India)

    Haralambos S Bagiorgas; Giouli Mihalakakou; Shafiqur Rehman; Luai M Al-Hadhrami

    2012-08-01

    This paper utilizes wind speed data measured at 3 and 10 m above water surface level using buoys at 10 stations in Ionian and Aegean Seas to understand the behaviour of wind and thereafter energy yield at these stations using 5 MW rated power offshore wind turbine. With wind power densities of 971 and 693 W/m2 at 50 m above water surface level, Mykonos and Lesvos were found to be superb and outstanding windy sites with wind class of 7 and 6, respectively. Other locations like Athos, Santorini and Skyros with wind power density of more than 530 W/m2 and wind class of 5 were found to be the excellent sites. Around 15–16% higher winds were observed at 10 m compared to that at 3 m. Lower values of wind speed were found during summer months and higher during winter time in most of the cases reported in the present work. Slightly decreasing (∼2% per year) linear trends were observed in annual mean wind speed at Lesvos and Santorini. These trends need to be verified with more data from buoys or from nearby onshore meteorological stations. At Athos and Mykonos, increasing linear trends were estimated. At all the stations the chosen wind turbine could produce energy for more than 70% of the time. The wind speed distribution was found to be well represented by Weibull parameters obtained using Maximum likelihood method compared to WAsP and Method of Moments.

  8. Coastal Ohio Wind Project

    Energy Technology Data Exchange (ETDEWEB)

    Gorsevski, Peter; Afjeh, Abdollah; Jamali, Mohsin; Bingman, Verner

    2014-04-04

    reduced the wake size and enhanced the vortices in the flow downstream of the turbine-tower compared with the tower alone case. Mean and rms velocity distributions from hot wire anemometer data confirmed that in a downwind configuration, the wake of the tower dominates the flow, thus the flow fields of a tower alone and tower-turbine combinations are nearly the same. For the upwind configuration, the mean velocity shows a narrowing of the wake compared with the tower alone case. The downwind configuration wake persisted longer than that of an upwind configuration; however, it was not possible to quantify this difference because of the size limitation of the wind tunnel downstream of the test section. The water tunnel studies demonstrated that the scale model studies could be used to adequately produce accurate motions to model the motions of a wind turbine platform subject to large waves. It was found that the important factors that affect the platform is whether the platform is submerged or surface piercing. In the former, the loads on the platform will be relatively reduced whereas in the latter case, the structure pierces the wave free surface and gains stiffness and stability. The other important element that affects the movement of the platform is depth of the sea in which the wind turbine will be installed. Furthermore, the wildlife biology component evaluated migratory patterns by different monitoring systems consisting of marine radar, thermal IR camera and acoustic recorders. The types of radar used in the project are weather surveillance radar and marine radar. The weather surveillance radar (1988 Doppler), also known as Next Generation Radar (NEXRAD), provides a network of weather stations in the US. Data generated from this network were used to understand general migratory patterns, migratory stopover habitats, and other patterns caused by the effects of weather conditions. At a local scale our marine radar was used to complement the datasets from NEXRAD and

  9. Wind Technologies & Evolving Opportunities (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Robichaud, R.

    2014-07-01

    This presentation covers opportunities for wind technology; wind energy market trends; an overview of the National Wind Technology Center near Boulder, Colorado; wind energy price and cost trends; wind turbine technology improvements; and wind resource characterization improvements.

  10. 2011 Wind Technologies Market Report

    Energy Technology Data Exchange (ETDEWEB)

    Wiser, Ryan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Bolinger, Mark [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Barbose, Galen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Darghouth, Naim [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hoen, Ben [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Mills, Andrew [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Porter, Kevin [Exeter Associates, Columbia, MD (United States); Buckley, Michael [Exeter Associates, Columbia, MD (United States); Fink, Sari [Exeter Associates, Columbia, MD (United States); Oteri, Frank [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tegen, Suzanne [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2012-08-01

    The U.S. wind power industry is facing uncertain times. With 2011 capacity additions having risen from 2010 levels and with a further sizable increase expected in 2012, there are – on the surface – grounds for optimism. Key factors driving growth in 2011 included continued state and federal incentives for wind energy, recent improvements in the cost and performance of wind power technology, and the need to meet an end-of-year construction start deadline in order to qualify for the Section 1603 Treasury grant program. At the same time, the currently-slated expiration of key federal tax incentives for wind energy at the end of 2012 – in concert with continued low natural gas prices and modest electricity demand growth – threatens to dramatically slow new builds in 2013.

  11. Surface Wind and Upper-Ocean Variability Associated with the Madden-Julian Oscillation Simulated by the Coupled Ocean-Atmosphere Mesoscale Prediction System

    Science.gov (United States)

    2013-07-01

    Coauthors, 2003: COAMPS version 3 model de- scription. NRL Publ. NRL/PU/7500-03-448, May 2003, 143 pp. ——, T. J. Campbell, H. Jin, S. Gaber sek , R. M. Hodur...and P. Martin, 2010: Effect of two-way air–sea coupling in high and low wind speed regimes. Mon. Wea. Rev., 138, 3579– 3602. ——, ——, S. Gaber sek , H

  12. The dune effect on sand-transporting winds on Mars

    Science.gov (United States)

    Jackson, Derek W. T.; Bourke, Mary C; Smyth, Thomas A. G.

    2015-01-01

    Wind on Mars is a significant agent of contemporary surface change, yet the absence of in situ meteorological data hampers the understanding of surface–atmospheric interactions. Airflow models at length scales relevant to landform size now enable examination of conditions that might activate even small-scale bedforms (ripples) under certain contemporary wind regimes. Ripples have the potential to be used as modern ‘wind vanes' on Mars. Here we use 3D airflow modelling to demonstrate that local dune topography exerts a strong influence on wind speed and direction and that ripple movement likely reflects steered wind direction for certain dune ridge shapes. The poor correlation of dune orientation with effective sand-transporting winds suggests that large dunes may not be mobile under modelled wind scenarios. This work highlights the need to first model winds at high resolution before inferring regional wind patterns from ripple movement or dune orientations on the surface of Mars today. PMID:26537669

  13. Long term trend of sea surface wind speed in the Northern Indian Ocean from 1958 to 2001%近44年北印度洋海表风速变化趋势分析

    Institute of Scientific and Technical Information of China (English)

    刘铁军; 郑崇伟; 李训强; 张文静

    2013-01-01

    In this paper,based on the ERA-40 wind field data from ECMWF (European Centre for Medium-Range Weather Forecasts),the long-term linear trend of sea surface wind speed from 1958 to 2001 in the northern Indian Ocean was analyzed.Results show that,(1) from 1958 to 2001,wind speed in low latitude of northern Indian Ocean and a wide range areas from Somalia to Sri Lanka shows an obvious increasing trend.Only some scatter regions have a decreasing trend during the last 44 years.(2) Sea surface wind speed in the entire of the northern Indian Ocean shows an obvious increasing trend with a rate of 0.0061m· s-1· a-1 from 1958 to 2011.(3) Linear trends of sea surface wind speed in different areas of the northern Indian Ocean have prominent seasonal variability.(4) During the last 44 years,there is a significant 2.0 years 2.6-3.7 years,5.2 years of change cycles,and 26 years of long-period oscillation for the North Indian Ocean sea surface wind speed.%利用来自ECMWF的ERA-40风场资料,就北印度洋海表风速的长期变化趋势展开分析,以期可为海洋水文保障、防灾减灾、研究全球气候变化提供参考.结果表明:(1)1958-2001年期间,北印度洋低纬度海域、索马里至斯里兰卡一带的大范围海域的海表风速表现出显著的逐年线性递增趋势,基本在0.01-0.02 m·s-1·a-1;呈显著性递减的区域主要分布于亚丁湾、红海、波斯湾、斯里兰卡北部零星海域、以及缅甸仰光西南部近海等小范围海域,约-0.01-0.005m·s-1·a-1;阿拉伯海、孟加拉湾等海域的海表风速在近44年期间则无显著性变化趋势;(2)近44年期间,北印度洋海域的海表风速整体上以0.0061m·s-1 ·a-1的速度显著性震荡递增,震荡区间在5.0-5.5 m·S-1之间;(3)不同海域海表风速的变化趋势在不同季节表现出很大差异:冬季和夏季,大部分海域海表风速的变化趋势显著,春季次之,秋季仅在赤道附近一带海域呈显著性递增;(4)近44

  14. Wind Power Meteorology

    DEFF Research Database (Denmark)

    Lundtang Petersen, Erik; Mortensen, Niels Gylling; Landberg, Lars

    : wind profiles and shear, turbulence and gust, and extreme winds. The data used in wind power meteorology stem mainly from three sources: onsite wind measurements, the synoptic networks, and the re-analysis projects. Wind climate analysis, wind resource estimation and siting further require a detailed......Wind power meteorology has evolved as an applied science, firmly founded on boundary-layer meteorology, but with strong links to climatology and geography. It concerns itself with three main areas: siting of wind turbines, regional wind resource assessment, and short-term prediction of the wind...... resource. The history, status and perspectives of wind power meteorology are presented, with emphasis on physical considerations and on its practical application. Following a global view of the wind resource, the elements of boundary layer meteorology which are most important for wind energy are reviewed...

  15. Advances in wind turbine blade design and materials

    DEFF Research Database (Denmark)

    Wind energy is gaining critical ground in the area of renewable energy, with wind energy being predicted to provide up to 8% of the world’s consumption of electricity by 2021. Advances in wind turbine blade design and materials reviews the design and functionality of wind turbine rotor blades...... of wind turbine blades. The final part of the book describes advances in wind turbine blade materials, development and testing, including biobased composites, surface protection and coatings, structural performance testing and the design, manufacture and testing of small wind turbine blades. Advances...... in wind turbine blade design and materials offers a comprehensive review of the recent advances and challenges encountered in wind turbine blade materials and design, and will provide an invaluable reference for researchers and innovators in the field of wind energy production, including materials...

  16. A Reexamination of the Emergy Input to a System from the Wind.

    Science.gov (United States)

    The wind energy absorbed in the global boundary layer (GBL, 900 mb surface) is the basis for calculating the wind emergy input for any system on the Earth’s surface. Estimates of the wind emergy input to a system depend on the amount of wind energy dissipated, which can hav...

  17. Careers in Wind Energy

    Science.gov (United States)

    Liming, Drew; Hamilton, James

    2011-01-01

    As a common form of renewable energy, wind power is generating more than just electricity. It is increasingly generating jobs for workers in many different occupations. Many workers are employed on wind farms: areas where groups of wind turbines produce electricity from wind power. Wind farms are frequently located in the midwestern, western, and…

  18. Prospecting for Wind

    Science.gov (United States)

    Swapp, Andy; Schreuders, Paul; Reeve, Edward

    2011-01-01

    Many people use wind to help meet their needs. Over the years, people have been able to harness or capture the wind in many different ways. More recently, people have seen the rebirth of electricity-generating wind turbines. Thus, the age-old argument about technology being either good or bad can also be applied to the wind. The wind can be a…

  19. Prospecting for Wind

    Science.gov (United States)

    Swapp, Andy; Schreuders, Paul; Reeve, Edward

    2011-01-01

    Many people use wind to help meet their needs. Over the years, people have been able to harness or capture the wind in many different ways. More recently, people have seen the rebirth of electricity-generating wind turbines. Thus, the age-old argument about technology being either good or bad can also be applied to the wind. The wind can be a…

  20. Assessment of regional wind energy resources over the Ukraine

    Science.gov (United States)

    Sobchenko, Anastasiia; Khomenko, Inna

    2015-04-01

    The purpose of the study has been to provide a preliminary assessment of different regions of the Ukraine. Investigation is based on thirty-minute wind observations collected through an 8-year period (January 1, 2002 to December 31, 2008) for seven airports of the Ukraine. For renewal of vertical profile of the wind direction and speed radiosounding data were used. By applying of the probabilistic analysis techniques to series of wind data and the wind extreme values, yearly, monthly and diurnal variation of wind speed and direction are derived. Based on these results theoretical distribution functions and exceeding probability are found for each airport. The statistic characteristics obtained were compared with the correspondent values provided for 1936-1960 and 1961-1990 periods and site-related temporal changeability is determined. For each period considered assessment of wind resources at 10 meters height is carried out. Since the geostrophic wind are frequently used to calculate the surface wind at heights between 10 and 200 m, in the research the distribution of the geostrophic wind for each airport were determined. Comparative analysis of distribution and statistic characteristics of geostrophic and surface winds are made. The relation between a set of values of the geostrophic wind and a set of values of the surface wind speed was provided for each airport. Using different relationship for variation of wind speed with height wind resources at heights between 10 and 200 were assessed. The results obtained show that with the lapse of the time wind speed and wind resources is decreased half the size. It is reflected general tendencies in the wind speed changeability over the European territory. Places which are most perspective for wind turbine installation are off-shore sites such as Odessa, and sites situated in the Crime