WorldWideScience

Sample records for surface types median

  1. Electrodiagnostic evaluation of median nerve conduction in Type II ...

    African Journals Online (AJOL)

    MJP

    2015-12-29

    Dec 29, 2015 ... them at high risk of developingdevastating hand and foot .... range in the case of parametric and non- parametric data ... The median value of median nerve velocities. (motor) with ... clinical approaches are, to a large extent,.

  2. A method for determining the median line of measured cylindrical and conical surfaces

    Science.gov (United States)

    Janecki, Dariusz; Zwierzchowski, Jarosław

    2015-08-01

    The paper presents a novel method for the determination of the median line of the cylindrical and conical surfaces. This method can be incorporated into virtually any cylindricity measurement strategy, including the bird-cage strategy and the helical line strategy. In the study, a median line was determined by minimizing the functional made up of two components. The form of the first component results from the classic definition of the median line provided in the corresponding standard. The other, termed the bending energy, is responsible for ensuring appropriate smoothness of the median line. In order to solve this variational problem, the median line was approximated by means of linear combination of cubic B-spline functions. A simulation and experiments were conducted to establish the suitability of the algorithm developed for the determination of the median line using the helical-line and the cross-section measurement strategy.

  3. Effects of muscle fiber type and size on EMG median frequency and conduction velocity.

    Science.gov (United States)

    Kupa, E J; Roy, S H; Kandarian, S C; De Luca, C J

    1995-07-01

    This paper describes an in vitro method for comparing surface-detected electromyographic median frequency (MF) and conduction velocity (CV) parameters with histochemical measurements of muscle fiber type composition and cross-sectional area (CSA). Electromyographic signals were recorded during electrically elicited tetanic contractions from rat soleus, extensor digitorum longus, and diaphragm muscles placed in an oxygenated Krebs bath. Fibers were typed as slow oxidative, fast oxidative glycolytic, and fast glycolytic based on histochemical enzyme stains. Muscles with a greater percentage of fast glycolytic and fast oxidative glycolytic fibers exhibited greater initial values of MF and CV as well as a greater reduction in these variables over the course of the contraction. Regression indicated that fiber type composition could be predicted based on two MF parameters. A weighted measure of muscle fiber CSA was found to be linearly related to both initial MF and CV. The results of this study suggest that MF and CV parameters recorded during a muscular contraction are related to muscle fiber type composition and muscle fiber CSA.

  4. Estimates of Median Flows for Streams on the 1999 Kansas Surface Water Register

    Science.gov (United States)

    Perry, Charles A.; Wolock, David M.; Artman, Joshua C.

    2004-01-01

    The Kansas State Legislature, by enacting Kansas Statute KSA 82a?2001 et. seq., mandated the criteria for determining which Kansas stream segments would be subject to classification by the State. One criterion for the selection as a classified stream segment is based on the statistic of median flow being equal to or greater than 1 cubic foot per second. As specified by KSA 82a?2001 et. seq., median flows were determined from U.S. Geological Survey streamflow-gaging-station data by using the most-recent 10 years of gaged data (KSA) for each streamflow-gaging station. Median flows also were determined by using gaged data from the entire period of record (all-available hydrology, AAH). Least-squares multiple regression techniques were used, along with Tobit analyses, to develop equations for estimating median flows for uncontrolled stream segments. The drainage area of the gaging stations on uncontrolled stream segments used in the regression analyses ranged from 2.06 to 12,004 square miles. A logarithmic transformation of the data was needed to develop the best linear relation for computing median flows. In the regression analyses, the significant climatic and basin characteristics, in order of importance, were drainage area, mean annual precipitation, mean basin permeability, and mean basin slope. Tobit analyses of KSA data yielded a model standard error of prediction of 0.285 logarithmic units, and the best equations using Tobit analyses of AAH data had a model standard error of prediction of 0.250 logarithmic units. These regression equations and an interpolation procedure were used to compute median flows for the uncontrolled stream segments on the 1999 Kansas Surface Water Register. Measured median flows from gaging stations were incorporated into the regression-estimated median flows along the stream segments where available. The segments that were uncontrolled were interpolated using gaged data weighted according to the drainage area and the bias between the

  5. Simultaneous estimation and variable selection in median regression using Lasso-type penalty.

    Science.gov (United States)

    Xu, Jinfeng; Ying, Zhiliang

    2010-06-01

    We consider the median regression with a LASSO-type penalty term for variable selection. With the fixed number of variables in regression model, a two-stage method is proposed for simultaneous estimation and variable selection where the degree of penalty is adaptively chosen. A Bayesian information criterion type approach is proposed and used to obtain a data-driven procedure which is proved to automatically select asymptotically optimal tuning parameters. It is shown that the resultant estimator achieves the so-called oracle property. The combination of the median regression and LASSO penalty is computationally easy to implement via the standard linear programming. A random perturbation scheme can be made use of to get simple estimator of the standard error. Simulation studies are conducted to assess the finite-sample performance of the proposed method. We illustrate the methodology with a real example.

  6. A molecular census of arcuate hypothalamus and median eminence cell types

    DEFF Research Database (Denmark)

    Campbell, John N; Macosko, Evan Z; Fenselau, Henning

    2017-01-01

    The hypothalamic arcuate-median eminence complex (Arc-ME) controls energy balance, fertility and growth through molecularly distinct cell types, many of which remain unknown. To catalog cell types in an unbiased way, we profiled gene expression in 20,921 individual cells in and around the adult...... somatostatin neuron population. We extended Drop-seq to detect dynamic expression changes across relevant physiological perturbations, revealing cell type-specific responses to energy status, including distinct responses in AgRP and POMC neuron subtypes. Finally, integrating our data with human genome......-wide association study data implicates two previously unknown neuron populations in the genetic control of obesity. This resource will accelerate biological discovery by providing insights into molecular and cell type diversity from which function can be inferred....

  7. Median raphe stimulation-induced motor inhibition concurrent with suppression of type 1 and type 2 hippocampal theta.

    Science.gov (United States)

    Bland, Brian H; Bland, Cheryl E; MacIver, M Bruce

    2016-03-01

    This study investigated behavioral, anatomical and electrophysiological effects produced by electrical stimulation of posterior hypothalamic (PH) or median raphe (MR) nuclei, independently and during combined stimulation of both PH and MR. These three stimulation conditions were applied during spontaneous behavior in an open field and during PH stimulation-induced wheel running, while simultaneously recording hippocampal (HPC) field activity. An additional objective was to determine the effects of MR stimulation on Type 1 movement related theta and Type 2 sensory processing related theta. To achieve the latter, when behavioral studies were completed we studied the same rats under urethane anesthesia and then during urethane anesthesia with the addition of atropine sulfate (ATSO4). Here we demonstrated that electrical stimulation of a localized region of the MR nucleus resulted in a profound inhibition of both spontaneously occurring theta related motor behaviors and the theta related motor behaviors induced by electrical stimulation of the PH nucleus. Furthermore, this motor inhibition occurred concurrently with strong suppression of hippocampal theta field oscillations in the freely moving rat, a condition where the theta recorded is Type 2 sensory processing theta occurring coincidently with Type 1 movement related theta (Bland, 1986). Our results indicate that motor inhibition resulted from stimulation of neurons located in the mid central region of the MR, while stimulation in adjacent regions produced variable responses, including movements and theta activity. The present study provided evidence that the pharmacological basis of the suppression of Type 2 sensory processing HPC theta was cholinergic. However, MR inhibition of PH-induced wheel running was not affected by cholinergic blockade, which blocks Type 2 theta, indicating that MR stimulation-induced motor inhibition also requires the suppression of Type 1 theta.

  8. Median power frequency of the surface electromyogram and blood lactate concentration in incremental cycle ergometry

    NARCIS (Netherlands)

    Jansen, R; Ament, W; Verkerke, GJ; Hof, AL

    1997-01-01

    The electromyogram (EMG) median power frequency of the vastus lateralis and flexor digitorum superficialis muscles was measured in 12 subjects during cycle ergometry with step-wise increasing exercise intensities up to 100% of VO2max. Blood lactate concentration was measured to investigate the relat

  9. The developmental trend of labrum and median eyes of Orsten-type preserved Phosphatocopina (Crustacea)

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The Phosphatocopina (Crustacea,Arthropoda) is an important group of ’Orsten-type’ preserved fossils.It is resolved as the sister-group of Eucrustacea.Here we study the labrum,the median eyes,and the inner lamella of Phosphatocopina based on the selected specimens respectively from western Hunan,South China,and Sweden.The labrum characters of different species exhibit interspecific difference.The ratio of labrum length/shield length is significant to the reconstruction of the ontogeny of phosphatocopines.The labrum characters should be introduced to the diagnosis of Phosphatocopina.In the earliest growth stage,the median eyes were inconspicuous,almost as flat as the other area of the hypstome.However,with the growth of the individuals they became conspicuous.There were two obviously concave structures on the ventral side of the hypostome in later stages,which were the positions where the median eyes should have been located.In addition,the two modes of preservation of the inner lamella,i.e.,that of shrinking and that of bulging up,are interpreted as the preservational artifact herein.

  10. Range Medians

    OpenAIRE

    Har-Peled, Sariel; Muthukrishnan, S.

    2008-01-01

    We study a generalization of the classical median finding problem to batched query case: given an array of unsorted $n$ items and $k$ (not necessarily disjoint) intervals in the array, the goal is to determine the median in {\\em each} of the intervals in the array. We give an algorithm that uses $O(n\\log n + k\\log k \\log n)$ comparisons and show a lower bound of $\\Omega(n\\log k)$ comparisons for this problem. This is optimal for $k=O(n/\\log n)$.

  11. Planning the City Logistics Terminal Location by Applying the Green p-Median Model and Type-2 Neurofuzzy Network

    Directory of Open Access Journals (Sweden)

    Dragan Pamučar

    2016-01-01

    Full Text Available The paper herein presents green p-median problem (GMP which uses the adaptive type-2 neural network for the processing of environmental and sociological parameters including costs of logistics operators and demonstrates the influence of these parameters on planning the location for the city logistics terminal (CLT within the discrete network. CLT shows direct effects on increment of traffic volume especially in urban areas, which further results in negative environmental effects such as air pollution and noise as well as increased number of urban populations suffering from bronchitis, asthma, and similar respiratory infections. By applying the green p-median model (GMM, negative effects on environment and health in urban areas caused by delivery vehicles may be reduced to minimum. This model creates real possibilities for making the proper investment decisions so as profitable investments may be realized in the field of transport infrastructure. The paper herein also includes testing of GMM in real conditions on four CLT locations in Belgrade City zone.

  12. Planning the City Logistics Terminal Location by Applying the Green p-Median Model and Type-2 Neurofuzzy Network.

    Science.gov (United States)

    Pamučar, Dragan; Vasin, Ljubislav; Atanasković, Predrag; Miličić, Milica

    2016-01-01

    The paper herein presents green p-median problem (GMP) which uses the adaptive type-2 neural network for the processing of environmental and sociological parameters including costs of logistics operators and demonstrates the influence of these parameters on planning the location for the city logistics terminal (CLT) within the discrete network. CLT shows direct effects on increment of traffic volume especially in urban areas, which further results in negative environmental effects such as air pollution and noise as well as increased number of urban populations suffering from bronchitis, asthma, and similar respiratory infections. By applying the green p-median model (GMM), negative effects on environment and health in urban areas caused by delivery vehicles may be reduced to minimum. This model creates real possibilities for making the proper investment decisions so as profitable investments may be realized in the field of transport infrastructure. The paper herein also includes testing of GMM in real conditions on four CLT locations in Belgrade City zone.

  13. Activation of angiotensin II type 1 receptors in the median preoptic nucleus induces a diuretic and natriuretic response in rats

    Institute of Scientific and Technical Information of China (English)

    Yuan Gao; Lei Luo; Hong Liu

    2009-01-01

    Objective: To investigate the effect of activation of angiotensin II (AngII) type 1 (ATI) receptors in the median preoptic nucleus (MnPO) of rats on renal sodium excretion. Methods: After anesthesia, the rats were injected into the MnPO via an implanted cannula. Urine samples were collected via a bladder cannula, and the urine sodium concentration was assayed with flame spectrophotometry. The serum level of endogenous digitalis-like factor (EDLF) and Na+,K+-ATPase activity in the renal cortex tissue were assayed respectively with a radioimmunoassay and with an ammonium molybdophosphate-based kit. Results: Both the urinary volume and the sodium excretion peaked 60 min after Angll was administered into the MnPO. The responses were accompanied by an increase in serum EDLF and a decrease in Na+,K+-ATPase activity in the renal cortex. The responses of diuresis and natriuresis, as well as an increase in serum EDLF and a decrease in Na+,K+-ATPase activity in the renal cortex induced by MnPO adminstration with AngII were inhibited by pior treatment with the AngII receptor blocking agent losartan into the MnPO. Conclusion: These results suggest that activation of ATI receptors in the MnPO of rat induces diuretic and natriuretic responses. The responses are associated with an increase release of EDLF and with the inhibition of Na+,K+-ATPase activity in renal cortex tissue.

  14. Incidence rate of type 2 diabetes is >50% lower in GrassrootsHealth cohort with median serum 25-hydroxyvitamin D of 41 ng/ml than in NHANES cohort with median of 22 ng/ml.

    Science.gov (United States)

    McDonnell, S L; Baggerly, L L; French, C B; Heaney, R P; Gorham, E D; Holick, M F; Scragg, R; Garland, C F

    2016-01-01

    Higher serum 25-hydroxyvitamin D [25(OH)D] concentrations have been associated with lower risk of type 2 diabetes. This study compared incidence rates of type 2 diabetes among participants aged ≥20 years in two U.S. cohorts with markedly different median 25(OH)D concentrations. The median 25(OH)D concentration in the GrassrootsHealth (GRH) cohort was 41 ng/ml (N=4933) while in the 2005-6 National Health and Nutrition Examination Survey (NHANES) it was 22 ng/ml (N=4078) (PGRH cohort, compared to 9.3 per 1000 population (95% confidence interval=6.7, 12.6) in NHANES. In the NHANES cohort, the lowest 25(OH)D tertiles (<17, 17-24 ng/ml) had higher odds of developing diabetes than the highest tertile (OR: 4.9, P=0.02 and 4.8, P=0.01 respectively), adjusting for covariates. Differences in demographics and methods may have limited comparability. Raising serum 25(OH)D may be a useful tool for reducing risk of diabetes in the population.

  15. Median nitrate concentrations in groundwater in the New Jersey Highlands Region estimated using regression models and land-surface characteristics

    Science.gov (United States)

    Baker, Ronald J.; Chepiga, Mary M.; Cauller, Stephen J.

    2015-01-01

    Nitrate-concentration data are used in conjunction with land-use and land-cover data to estimate median nitrate concentrations in groundwater underlying the New Jersey (NJ) Highlands Region. Sources of data on nitrate in 19,670 groundwater samples are from the U.S. Geological Survey (USGS) National Water Information System (NWIS) and the NJ Private Well Testing Act (PWTA).

  16. An IIR median hybrid filter

    Science.gov (United States)

    Bauer, Peter H.; Sartori, Michael A.; Bryden, Timothy M.

    1992-01-01

    A new class of nonlinear filters, the so-called class of multidirectional infinite impulse response median hybrid filters, is presented and analyzed. The input signal is processed twice using a linear shift-invariant infinite impulse response filtering module: once with normal causality and a second time with inverted causality. The final output of the MIMH filter is the median of the two-directional outputs and the original input signal. Thus, the MIMH filter is a concatenation of linear filtering and nonlinear filtering (a median filtering module). Because of this unique scheme, the MIMH filter possesses many desirable properties which are both proven and analyzed (including impulse removal, step preservation, and noise suppression). A comparison to other existing median type filters is also provided.

  17. Ultrasound analysis of gray-scale median value of carotid plaques is a useful reference index for cerebro-cardiovascular events in patients with type 2 diabetes.

    Science.gov (United States)

    Ariyoshi, Kyoko; Okuya, Shigeru; Kunitsugu, Ichiro; Matsunaga, Kimie; Nagao, Yuko; Nomiyama, Ryuta; Takeda, Komei; Tanizawa, Yukio

    2015-01-01

    Measurements of plaque echogenicity, the gray-scale median (GSM), were shown to correlate inversely with risk factors for cerebro-cardiovascular disease (CVD). The eicosapentaenoic acid (EPA)/arachidonic acid (AA) ratio is a potential predictor of CVD risk. In the present study, we assessed the usefulness of carotid plaque GSM values and EPA/AA ratios in atherosclerotic diabetics. A total of 84 type 2 diabetics with carotid artery plaques were enrolled. On admission, platelet aggregation and lipid profiles, including EPA and AA, were examined. Using ultrasound, mean intima media thickness and plaque score were measured in carotid arteries. Plaque echogenicity was evaluated using computer-assisted quantification of GSM. The patients were then further observed for approximately 3 years. Gray-scale median was found to be a good marker of CVD events. On multivariate logistic regression analysis, GSM <32 and plaque score ≥5 were significantly associated with past history and onset of CVD during the follow-up period, the odds ratios being 7.730 (P = 0.014) and 4.601 (P = 0.046), respectively. EPA/AA showed a significant correlation with GSM (P = 0.012) and high-density lipoprotein cholesterol (P = 0.039), and an inverse correlation with platelet aggregation (P = 0.046) and triglyceride (P = 0.020). Although most patients with CVD had both low GSM and low EPA/AA values, an association of EPA/AA with CVD events could not be statistically confirmed. The present results suggest the GSM value to be useful as a reference index for CVD events in high-risk atherosclerotic diabetics. Associations of the EPA/AA ratio with known CVD risk factors warrant a larger and more extensive study to show the usefulness of this parameter.

  18. Towards optimal range medians

    DEFF Research Database (Denmark)

    Brodal, Gerth Stølting; Gfeller, Beat; Jørgensen, Allan Grønlund

    2011-01-01

    that in the cell-probe model, any data structure which supports updates in O(logO(1)n) time must have Ω(log n/loglog n) query time. Our approach naturally generalizes to higher-dimensional range median problems, where element positions and query ranges are multidimensional - it reduces a range median query...... to a logarithmic number of range counting queries....

  19. Functional Median Polish

    KAUST Repository

    Sun, Ying

    2012-08-03

    This article proposes functional median polish, an extension of univariate median polish, for one-way and two-way functional analysis of variance (ANOVA). The functional median polish estimates the functional grand effect and functional main factor effects based on functional medians in an additive functional ANOVA model assuming no interaction among factors. A functional rank test is used to assess whether the functional main factor effects are significant. The robustness of the functional median polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science, including one-way and two-way ANOVA when functional data are either curves or images. Specifically, Canadian temperature data, U. S. precipitation observations and outputs of global and regional climate models are considered, which can facilitate the research on the close link between local climate and the occurrence or severity of some diseases and other threats to human health. © 2012 International Biometric Society.

  20. Robustifying Vector Median Filter

    Directory of Open Access Journals (Sweden)

    Valentín Gregori

    2011-08-01

    Full Text Available This paper describes two methods for impulse noise reduction in colour images that outperform the vector median filter from the noise reduction capability point of view. Both methods work by determining first the vector median in a given filtering window. Then, the use of complimentary information from componentwise analysis allows to build robust outputs from more reliable components. The correlation among the colour channels is taken into account in the processing and, as a result, a more robust filter able to process colour images without introducing colour artifacts is obtained. Experimental results show that the images filtered with the proposed method contain less noisy pixels than those obtained through the vector median filter. Objective measures demonstrate the goodness of the achieved improvement.

  1. Hyperbolicity in Median Graphs

    Indian Academy of Sciences (India)

    José M Sigarreta

    2013-11-01

    If is a geodesic metric space and $x_1,x_2,x_3\\in X$, a geodesic triangle $T=\\{x_1,x_2,x_3\\}$ is the union of the three geodesics $[x_1 x_2],[x_2 x_3]$ and $[x_3 x_1]$ in . The space is -hyperbolic (in the Gromov sense) if any side of is contained in a -neighborhood of the union of the two other sides, for every geodesic triangle in . If is hyperbolic, we denote by () the sharp hyperbolicity constant of , i.e.,$(X)=\\inf\\{≥ 0: X \\quad\\text{is}\\quad -\\text{hyperbolic}\\}$. In this paper we study the hyperbolicity of median graphs and we also obtain some results about general hyperbolic graphs. In particular, we prove that a median graph is hyperbolic if and only if its bigons are thin.

  2. PERSISTENT MEDIAN ARTERY IN THE CARPAL TUNNEL

    Directory of Open Access Journals (Sweden)

    Raviprasanna.K.H

    2014-09-01

    Full Text Available Introduction: Persistent median artery originates from the anterior interosseous artery in proximal one-third of the forearm and accompanies median nerve. Median artery may regress in the forearm or enter palm through the carpal tunnel deep to flexor retinaculum of wrist and supply palm by anastomosing with the superficial palmar arch. Objective: In present study the objective was to study presence of persistent median artery accompanying median nerve and its termination Materials and Methods: The study included 50 human cadaver upper limb specimens at the Department of Anatomy, Mysore Medical College & Research Institute, Mysore during 2011-13. These specimens fixed in 10% formalin were finely dissected and persistent median artery was traced from origin to termination. Results: Out of 50 human cadaver specimens, persistent median artery was present in 4 specimens (8%. All the 4 median arteries originated from anterior interosseous artery and were of palmar type which reached palm. Out of 4 median arteries, 3 median arteries (6% took part in completion of superficial palmar arch, supplying the distal aspect of palm and 1 median artery (2% directly supplied radial two and half fingers without forming arch. Conclusion: Knowledge of unusual variations helps in proper treatment of disorders of the median nerve. Presence of persistent median artery usually will be asymptomatic but may cause symptoms of carpal tunnel syndrome or pronator teres syndrome when subjected to compression. Rarely this artery can be taken for reconstruction

  3. Range Selection and Median

    DEFF Research Database (Denmark)

    Jørgensen, Allan Grønlund; Larsen, Kasper Green

    2011-01-01

    and several natural special cases thereof. The rst special case is known as range median, which arises when k is xed to b(j 􀀀 i + 1)=2c. The second case, denoted prex selection, arises when i is xed to 0. Finally, we also consider the bounded rank prex selection problem and the xed rank range......Range selection is the problem of preprocessing an input array A of n unique integers, such that given a query (i; j; k), one can report the k'th smallest integer in the subarray A[i];A[i+1]; : : : ;A[j]. In this paper we consider static data structures in the word-RAM for range selection...... selection problem. In the former, data structures must support prex selection queries under the assumption that k for some value n given at construction time, while in the latter, data structures must support range selection queries where k is xed beforehand for all queries. We prove cell probe lower bounds...

  4. Viscoelastic love-type surface waves

    Science.gov (United States)

    Borcherdt, Roger D.

    2008-01-01

    The general theoretical solution for Love-Type surface waves in viscoelastic media provides theoreticalexpressions for the physical characteristics of the waves in elastic as well as anelastic media with arbitraryamounts of intrinsic damping. The general solution yields dispersion and absorption-coefficient curves for the waves as a function of frequency and theamount of intrinsic damping for any chosen viscoelastic model.Numerical results valid for a variety of viscoelastic models provide quantitative estimates of the physicalcharacteristics of the waves pertinent to models of Earth materials ranging from small amounts of damping in the Earth’s crust to moderate and large amounts of damping in soft soils and water-saturated sediments. Numerical results, presented herein, are valid for a wide range of solids and applications.

  5. Surface-immobilized DNAzyme-type biocatalysis

    Science.gov (United States)

    Stefan, Loic; Lavergne, Thomas; Spinelli, Nicolas; Defrancq, Eric; Monchaud, David

    2014-02-01

    The structure of the double helix of deoxyribonucleic acid (DNA, also called duplex-DNA) was elucidated sixty years ago by Watson, Crick, Wilkins and Franklin. Since then, DNA has continued to hold a fascination for researchers in diverse fields including medicine and nanobiotechnology. Nature has indeed excelled in diversifying the use of DNA: beyond its canonical role of repository of genetic information, DNA could also act as a nanofactory able to perform some complex catalytic tasks in an enzyme-mimicking manner. The catalytic capability of DNA was termed DNAzyme; in this context, a peculiar DNA structure, a quadruple helix also named quadruplex-DNA, has recently garnered considerable interest since its autonomous catalytic proficiency relies on its higher-order folding that makes it suitable to interact efficiently with hemin, a natural cofactor of many enzymes. Quadruplexes have thus been widely studied for their hemoprotein-like properties, chiefly peroxidase-like activity, i.e., their ability to perform hemin-mediated catalytic oxidation reactions. Recent literature is replete with applications of quadruplex-based peroxidase-mimicking DNAzyme systems. Herein, we take a further leap along the road to biochemical applications, assessing the actual efficiency of catalytic quadruplexes for the detection of picomolar levels of surface-bound analytes in an enzyme-linked immunosorbent (ELISA)-type assay. To this end, we exploit an innovative strategy based on the functionalization of DNA by a multitasking platform named RAFT (for regioselectivity addressable functionalized template), whose versatility enables the grafting of DNA whatever its nature (duplex-DNA, quadruplex-DNA, etc.). We demonstrate that the resulting biotinylated RAFT/quadruplex systems indeed acquire catalytic properties that allow for efficient luminescent detection of picomoles of surface-bound streptavidin. We also highlight some of the pitfalls that have to be faced during optimization

  6. Landau-Zener type surface hopping algorithms

    CERN Document Server

    Belyaev, Andrey K; Trigila, Giulio

    2014-01-01

    A class of surface hopping algorithms is studied comparing two recent Landau-Zener (LZ) formulas for the probability of nonadiabatic transitions. One of the formulas requires a diabatic representation of the potential matrix while the other one depends only on the adiabatic potential energy surfaces. For each classical trajectory, the nonadiabatic transitions take place only when the surface gap attains a local minimum. Numerical experiments are performed with deterministically branching trajectories and with probabilistic surface hopping. The deterministic and the probabilistic approach confirm the good agreement of both the LZ probabilities as well the good approximation of the reference solution computed solving the Schroedinger equation via a grid based pseudo-spectral method. Visualizations of position expectations and superimposed surface hopping trajectories with reference position densities illustrate the effective dynamics of the investigated algorithms.

  7. GPU Accelerated Vector Median Filter

    Science.gov (United States)

    Aras, Rifat; Shen, Yuzhong

    2011-01-01

    Noise reduction is an important step for most image processing tasks. For three channel color images, a widely used technique is vector median filter in which color values of pixels are treated as 3-component vectors. Vector median filters are computationally expensive; for a window size of n x n, each of the n(sup 2) vectors has to be compared with other n(sup 2) - 1 vectors in distances. General purpose computation on graphics processing units (GPUs) is the paradigm of utilizing high-performance many-core GPU architectures for computation tasks that are normally handled by CPUs. In this work. NVIDIA's Compute Unified Device Architecture (CUDA) paradigm is used to accelerate vector median filtering. which has to the best of our knowledge never been done before. The performance of GPU accelerated vector median filter is compared to that of the CPU and MPI-based versions for different image and window sizes, Initial findings of the study showed 100x improvement of performance of vector median filter implementation on GPUs over CPU implementations and further speed-up is expected after more extensive optimizations of the GPU algorithm .

  8. Weierstrass Type Representation of Willmore Surfaces in Sn

    Institute of Scientific and Technical Information of China (English)

    Qiao Ling XIA; Yi Bing SHEN

    2004-01-01

    In this paper, we reformulate the Euler-Lagrange equations of Willmore surfaces in Sn as the flatness of a family of certain loop algebra-valued 1-forms. Therefore we can give the Weierstrass type representation of conformal Willmore surfaces. We also discuss the relations between conformal Willmore surfaces in Sn and minimal surfaces in constant curvature spaces Sn, Rn, Hn, and prove that some special Willmore surfaces can be derived from minimal surfaces in Sn, Rn, Hn.

  9. Non-Local Euclidean Medians.

    Science.gov (United States)

    Chaudhury, Kunal N; Singer, Amit

    2012-11-01

    In this letter, we note that the denoising performance of Non-Local Means (NLM) can be improved at large noise levels by replacing the mean by the Euclidean median. We call this new denoising algorithm the Non-Local Euclidean Medians (NLEM). At the heart of NLEM is the observation that the median is more robust to outliers than the mean. In particular, we provide a simple geometric insight that explains why NLEM performs better than NLM in the vicinity of edges, particularly at large noise levels. NLEM can be efficiently implemented using iteratively reweighted least squares, and its computational complexity is comparable to that of NLM. We provide some preliminary results to study the proposed algorithm and to compare it with NLM.

  10. Spectral properties and conformal type of surfaces

    Directory of Open Access Journals (Sweden)

    PHILIPPE CASTILLON

    2002-12-01

    Full Text Available In this short note, we announce a result relating the geometry of a riemannian surface to the positivity of some operators on this surface (the operators considered here are of the form surface Laplacian plus a scalar multiple of the curvature function. In particular we obtain a theorem "à la Huber'': under a spectral hypothesis we prove that the surface is conformally equivalent to a Riemann surface with a finite number of points removed. This problem has its origin in the study of stable minimal surfaces.Nesta comunicação, anunciamos um resultado que relaciona a geometria de uma superfície riemanniana com a positividade de certos operadores na superfície (os operadores considerados têm forma "Laplaciano mais um múltiplo da curvatura''. Em particular, obtemos um teorema "à la Huber'': usando uma condição espectral, provamos que a superfície é conformemente equivalente a uma superfície de Riemann menos um número finito de pontos. Este problema tem origem no estudo das superfícies mínimas estáveis.

  11. Median statistics cosmological parameter values

    Energy Technology Data Exchange (ETDEWEB)

    Crandall, Sara, E-mail: sara1990@ksu.edu; Ratra, Bharat, E-mail: ratra@phys.ksu.edu

    2014-05-01

    We present median statistics central values and ranges for 12 cosmological parameters, using 582 measurements (published during 1990–2010) collected by [9]. On comparing to the recent Planck Collaboration [1] estimates of 11 of these parameters, we find good consistency in ten cases.

  12. Novel types of anti-ecloud surfaces

    CERN Document Server

    Montero, I; Dávila, M E; Nistor, V; Galán, L; González, L A; Raboso, D; Costa Pinto, P; Taborelli, M; Caspers, F; Ulrich, U; Wolk, D

    2013-01-01

    In high power RF devices for space, secondary electron emission appears as the main parameter governing the multipactor effect and as well as the e-cloud in large accelerators. Critical experimental activities included development of coatings with low secondary electron emission yield (SEY) for steel (large accelerators) and aluminium (space applications). Coatings with surface roughness of high aspect ratio producing the so-call secondary emission suppression effect appear as the selected strategy. In this work a detailed study of the SEY of these technological coatings and also the experimental deposition methods (PVD and electrochemical) are presented. The coating-design approach selected for new low SEY coatings include rough metals (Ag, Au, Al), rough alloys (NEG), particulated and magnetized surfaces, and also graphene like coatings. It was found that surface roughness also mitigate the SEY deterioration due to aging processes.

  13. A Simons type formula for surfaces with parallel mean curvature

    CERN Document Server

    Fetcu, Dorel

    2011-01-01

    We prove a Simons type equation for non-minimal surfaces with parallel mean curvature vector (pmc surfaces) in $M^n(c)\\times\\mathbb{R}$, where $M^n(c)$ is an $n$-dimensional space form. Then, we use this equation in order to characterize complete non-minimal pmc surfaces with non-negative Gaussian curvature.

  14. Portfolio optimization using median-variance approach

    Science.gov (United States)

    Wan Mohd, Wan Rosanisah; Mohamad, Daud; Mohamed, Zulkifli

    2013-04-01

    Optimization models have been applied in many decision-making problems particularly in portfolio selection. Since the introduction of Markowitz's theory of portfolio selection, various approaches based on mathematical programming have been introduced such as mean-variance, mean-absolute deviation, mean-variance-skewness and conditional value-at-risk (CVaR) mainly to maximize return and minimize risk. However most of the approaches assume that the distribution of data is normal and this is not generally true. As an alternative, in this paper, we employ the median-variance approach to improve the portfolio optimization. This approach has successfully catered both types of normal and non-normal distribution of data. With this actual representation, we analyze and compare the rate of return and risk between the mean-variance and the median-variance based portfolio which consist of 30 stocks from Bursa Malaysia. The results in this study show that the median-variance approach is capable to produce a lower risk for each return earning as compared to the mean-variance approach.

  15. Study of recurrent branch of median nerve (Thenar's muscular branch in relation to the flexor retinaculum and median in 64 hands (32 Men

    Directory of Open Access Journals (Sweden)

    Amirsadri R

    1998-07-01

    Full Text Available Variation of recurred branch of median nerve in relation to the median and flexor retinaculum are significant for both hand surgeons and specialists always. In this study, 64 cadaver hands (32 men have been dissected. The median nerve was identified at the proximal edge of the flexor retinaculum, and in order to expose carpal tunnel the ligament was divided, and the above subjects were studied. The results are: 1 The relation of recurrent nerve to the flexor retinaculum was classified into 4 types: A In (53.1% of subjects, this branch arises from the median after the flexor retinaculum. B In (31.3% of subjects, it arises from the median in the carpal tunnel and the moves around the lower edge of flexor retinaculum and enters the thenar region. C In (14.1% of subjects, it arises from the median in the carpal tunnel and pierces the flexor retinaculum. D In (1.56% of subjects it arises, in the carpal tunnel and it divides into two subbranches here. One follows pattern A and the other pattern C. 2 In this step, the relation of the recurrent branch to the median nerve was studied. The results show that inspite of this image even though most often the recurrent branch arises from the lateral side of median, in (68.75% of subjects it arises from it's anterior surface. The MC Nemar test reveals that there is no relation between manifestation of mentioned patterns with right or left hands.

  16. Scattering-Type Surface-Plasmon-Resonance Biosensors

    Science.gov (United States)

    Wang, Yu; Pain, Bedabrata; Cunningham, Thomas; Seshadri, Suresh

    2005-01-01

    Biosensors of a proposed type would exploit scattering of light by surface plasmon resonance (SPR). Related prior biosensors exploit absorption of light by SPR. Relative to the prior SPR biosensors, the proposed SPR biosensors would offer greater sensitivity in some cases, enough sensitivity to detect bioparticles having dimensions as small as nanometers. A surface plasmon wave can be described as a light-induced collective oscillation in electron density at the interface between a metal and a dielectric. At SPR, most incident photons are either absorbed or scattered at the metal/dielectric interface and, consequently, reflected light is greatly attenuated. The resonance wavelength and angle of incidence depend upon the permittivities of the metal and dielectric. An SPR sensor of the type most widely used heretofore includes a gold film coated with a ligand a substance that binds analyte molecules. The gold film is thin enough to support evanescent-wave coupling through its thickness. The change in the effective index of refraction at the surface, and thus the change in the SPR response, increases with the number of bound analyte molecules. The device is illuminated at a fixed wavelength, and the intensity of light reflected from the gold surface opposite the ligand-coated surface is measured as a function of the angle of incidence. From these measurements, the angle of minimum reflection intensity is determined

  17. Rayleigh-type Surface Quasimodes in General Linear Elasticity

    CERN Document Server

    Hansen, Sönke

    2010-01-01

    Rayleigh-type surface waves correspond to the characteristic variety, in the elliptic boundary region, of the displacement-to-traction map. In this paper, surface quasimodes are constructed for the reduced elastic wave equation, anisotropic in general, with traction-free boundary. Assuming a global variant of a condition of Barnett and Lothe, the construction is reduced to an eigenvalue problem for a selfadjoint scalar first order pseudo-differential operator on the boundary. The principal and the subprincipal symbol of this operator are computed. The formula for the subprincipal symbol seems to be new even in the isotropic case.

  18. Surface nanobubbles as a function of gas type

    CERN Document Server

    van Limbeek, Michiel; 10.1021/la2005387

    2011-01-01

    We experimentally investigate the nucleation of surface nanobubbles on PFDTS-coated silicon as a function of the specific gas dissolved in the water. In each case we restrict ourselves to equilibrium conditions ($c=100%$, $T_{liquid} = T_{substrate}$). Not only is nanobubble nucleation a strong function of gas type, but there also exists an optimal system temperature of $\\sim 35-40\\mathrm{^oC}$ where nucleation is maximized, which is weakly dependent on gas type. We also find that contact angle is a function of nanobubble radius of curvature for all gas types investigated. Fitting this data allows us to describe a line tension which is dependent on the type of gas, indicating that the nanobubbles are sat on top of adsorbed gas molecules. The average line tension was $\\tau \\sim -0.8 \\mathrm{nN}$.

  19. The Land Surface Temperature Impact to Land Cover Types

    Science.gov (United States)

    Ibrahim, I.; Abu Samah, A.; Fauzi, R.; Noor, N. M.

    2016-06-01

    Land cover type is an important signature that is usually used to understand the interaction between the ground surfaces with the local temperature. Various land cover types such as high density built up areas, vegetation, bare land and water bodies are areas where heat signature are measured using remote sensing image. The aim of this study is to analyse the impact of land surface temperature on land cover types. The objectives are 1) to analyse the mean temperature for each land cover types and 2) to analyse the relationship of temperature variation within land cover types: built up area, green area, forest, water bodies and bare land. The method used in this research was supervised classification for land cover map and mono window algorithm for land surface temperature (LST) extraction. The statistical analysis of post hoc Tukey test was used on an image captured on five available images. A pixel-based change detection was applied to the temperature and land cover images. The result of post hoc Tukey test for the images showed that these land cover types: built up-green, built up-forest, built up-water bodies have caused significant difference in the temperature variation. However, built up-bare land did not show significant impact at p<0.05. These findings show that green areas appears to have a lower temperature difference, which is between 2° to 3° Celsius compared to urban areas. The findings also show that the average temperature and the built up percentage has a moderate correlation with R2 = 0.53. The environmental implications of these interactions can provide some insights for future land use planning in the region.

  20. Identification of contaminant type in surface electromyography (EMG) signals.

    Science.gov (United States)

    McCool, Paul; Fraser, Graham D; Chan, Adrian D C; Petropoulakis, Lykourgos; Soraghan, John J

    2014-07-01

    The ability to recognize various forms of contaminants in surface electromyography (EMG) signals and to ascertain the overall quality of such signals is important in many EMG-enabled rehabilitation systems. In this paper, new methods for the automatic identification of commonly occurring contaminant types in surface EMG signals are presented. Such methods are advantageous because the contaminant type is typically not known in advance. The presented approach uses support vector machines as the main classification system. Both simulated and real EMG signals are used to assess the performance of the methods. The contaminants considered include: 1) electrocardiogram interference; 2) motion artifact; 3) power line interference; 4) amplifier saturation; and 5) additive white Gaussian noise. Results show that the contaminants can readily be distinguished at lower signal to noise ratios, with a growing degree of confusion at higher signal to noise ratios, where their effects on signal quality are less significant.

  1. Winter precipitation types and icing at the surface

    Energy Technology Data Exchange (ETDEWEB)

    Theriault, J.; Stewart, R. [McGill Univ., Montreal, PQ (Canada). Dept. of Atmospheric and Oceanic Sciences

    2005-07-01

    An understanding of the physics of winter precipitation formation mechanisms is important for the forecasting of winter storms and associated icing. Empirical techniques are generally used to account for many types of precipitation. This paper proposed a microphysics scheme able to predict liquid particles, solid particles and those with a mixture of solid and liquid particles within varying environmental conditions. A revised 1-D cloud model utilizing a double-moment microphysics scheme was presented. The basic physics of liquid and semi-liquid particles formation and their interaction with the environment were outlined. A detailed evolution of precipitation types and environmental conditions was examined using typical temperature profiles and a study of other atmospheric conditions. The double microphysics scheme predicted the total concentration and mixing of various hydrometeor categories which were divided into 2 different branches: frozen and liquid. Characteristics for the categories were presented. A comparison of temperature, moisture and precipitation profiles was presented, as well as a comparison of surface precipitation types. The relationship between sounding parameters and precipitation types was examined, and ranges of temperature and depth were outlined. The study showed that the occurrence of a particular precipitation type or combinations of types can be associated with a range of atmospheric profiles. Melting and refreezing parameters exhibited variations for the same precipitation types and their combinations were not produced within a single profile. It was concluded that profiles must be very precise to simulate certain combinations. 10 refs., 1 tab., 8 figs.

  2. Unusual course of the median nerve

    Directory of Open Access Journals (Sweden)

    Vashishtha K

    2010-12-01

    Full Text Available One extremely unusual observation has been reported in this case report. During dissection of left hand of an adult human cadaver we found median nerve passing through the substance of flexor retinaculum. Median nerve coursed through the entire extent of flexor retinaculum in a fascial canal. No other structure was found along with nerve in the fascial canal. After emerging from the flexor retinaculum median nerve took its usual course in the hand. To the best of our knowledge this kind of variant median nerve course has not been described in published literature.

  3. Sosiaalisen median strategia : Case Yritys X

    OpenAIRE

    Tuomola, Miikka

    2015-01-01

    Tämän opinnäytetyön tarkoituksena oli luoda sosiaalisen median strategia Yritys X:n käyttöön. Tavoitteena oli löytää suomalaiselle telekommunikaatioalalla toimivalle yritykselle sopivat sosiaalisen median kanavat, jotka tarjoavat väylän markkinoinnin tehostamiseen ja yrityksen imagon vahvistamiseen. Toimeksiantaja keskittyy liiketoiminnassaan B2B-liiketoimintaan. Strategia oli ajankohtainen sosiaalisen median roolin jatkuvan kasvun vuoksi. Sosiaalisen median merkitys ja rooli on merkittäv...

  4. Advanced median method for timing jitter compensation

    Institute of Scientific and Technical Information of China (English)

    Wang Chen; Zhu Jiangmiao; Jan Verspecht; Liu Mingliang; Li Yang

    2008-01-01

    Timing jitter is one of the main factors that influence on the accuracy of time domain precision measurement. Timing jitter compensation is one of the problems people concern. Because of the flaws of median method, PDF deconvolution method and synthetic method, we put forward a new method for timing jitter compensation, which is called advanced median method. The theory of the advanced median method based on probability and statistics is analyzed, and the process of the advanced median method is summarized in this paper. Simulation and experiment show that compared with other methods, the new method could compensate timing jitter effectively.

  5. Electronic system for floor surface type detection in robotics applications

    Science.gov (United States)

    Tarapata, Grzegorz; Paczesny, Daniel; Tarasiuk, Łukasz

    2016-11-01

    The paper reports a recognizing method base on ultrasonic transducers utilized for the surface types detection. Ultra-sonic signal is transmitted toward the examined substrate, then reflected and scattered signal goes back to another ultra-sonic receiver. Thee measuring signal is generated by a piezo-electric transducer located at specified distance from the tested substrate. The detector is a second piezo-electric transducer located next to the transmitter. Depending on thee type of substrate which is exposed by an ultrasonic wave, the signal is partially absorbed inn the material, diffused and reflected towards the receiver. To measure the level of received signal, the dedicated electronic circuit was design and implemented in the presented systems. Such system was designed too recognize two types of floor surface: solid (like concrete, ceramic stiles, wood) and soft (carpets, floor coverings). The method will be applied in electronic detection system dedicated to autonomous cleaning robots due to selection of appropriate cleaning method. This work presents the concept of ultrasonic signals utilization, the design of both the measurement system and the measuring stand and as well number of wide tests results which validates correctness of applied ultrasonic method.

  6. The Ultrasonographic Findings of Bifid Median Nerve

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hee Jin; Park, Noh Hyuck; Joh, Joon Hee [Myoungji Hospital, Gwandong University College of Medicine, Gangneung (Korea, Republic of); Lee, Sung Moon [Dongsan Medical Center, Keimyung University School of Medicine, Daegu (Korea, Republic of)

    2009-09-15

    We wanted to evaluate the ultrasonographic findings of bifid median nerve and its clinical significance. We retrospectively reviewed five cases (three men and two women, mean age: 54 years) of incidentally found bifid median nerve from 264 cases of clinically suspected carpal-tunnel syndrome that were seen at our hospital during last 6 years. Doppler sonography was performed in all five cases and MR angiography was done in one case for detecting a persistent median artery. The difference ({Delta}CSA) between the sum of the cross-sectional areas of the bifid median nerve at the pisiform level (CSA2) and the cross-sectional area proximal to the bifurcation(CSA1) was calculated. The incidence of a bifid median nerve was 1.9%. All the patients presented with a tingling sensation on a hand and two patients had nocturnal pain. All the cases showed bifurcation of the nerve bundle proximal to the carpal tunnel. The margins appeared relatively smooth and each bundle showed a characteristic fascicular pattern. A persistent median artery was noted between the bundles in four cases. {Delta}CSA was more than 2 mm 2 in four cases. Bifid median nerve with a persistent median artery is a relatively rare normal variance and these are very important findings before performing surgical intervention to avoid potential nerve injury and massive bleeding. We highly suggest that radiologists should understand the anatomical characteristics of this anomaly and make efforts to detect it

  7. Adaptive Marginal Median Filter for Colour Images

    Directory of Open Access Journals (Sweden)

    Almanzor Sapena

    2011-03-01

    Full Text Available This paper describes a new filter for impulse noise reduction in colour images which is aimed at improving the noise reduction capability of the classical vector median filter. The filter is inspired by the application of a vector marginal median filtering process over a selected group of pixels in each filtering window. This selection, which is based on the vector median, along with the application of the marginal median operation constitutes an adaptive process that leads to a more robust filter design. Also, the proposed method is able to process colour images without introducing colour artifacts. Experimental results show that the images filtered with the proposed method contain less noisy pixels than those obtained through the vector median filter.

  8. Wetting, prewetting and surface transitions in type-I superconductors

    Science.gov (United States)

    Indekeu, J. O.; van Leeuwen, J. M. J.

    1995-02-01

    Within the Ginzburg-Landau theory, which is quantitatively correct for classical superconductors, it is shown that a type-I superconductor can display an interface delocalization or “wetting” transition, in which a macroscopically thick superconducting layer intrudes from the surface into the bulk normal phase. The condition for this transition to occur is that the superconducting order parameter | ψ| 2 is enhanced at the surface. This corresponds to a negative surface extrapolation length b. The wetting transition takes place at bulk two-phase coexistence of normal and superconducting phases, at a temperature TD below the critical temperature Tc, and at magnetic field HD = Hc( TD). The field is applied parallel to the surface. Surprisingly, the order of the wetting transition is controlled by a bulk material constant, the Ginzburg-Landau parameter κ. This is very unusual, since in other systems (fluids, Ising magnets,…) the order of the wetting transition depends on surface parameters that are difficult to determine or control. For superconductors, first-order wetting is predicted for 0 ≤ κ wetting for 0.374 wetting, the prewetting extension is also found. Unlike in standard wetting problems, the prewetting line does not terminate at a critical point but changes from first to second order at a tricritical point. Twinning-plane superconductivity (TPS) is reinterpreted as a prewetting phenomenon. The possibility of critical wetting in superconductors is especially interesting because this phenomenon has largely eluded experimental verification in any system until now. Furthermore, superconductors provide a realization of wetting in systems with short-range (exponentially decaying) interactions. This is very different from the usual long-range (algebraically decaying) interactions, such as van der Waals forces, and has important consequences for the wetting characteristics.

  9. Effect of enzymatic hydrolysis on surface activity and surface rheology of type I collagen.

    Science.gov (United States)

    Kezwoń, Aleksandra; Chromińska, Ilona; Frączyk, Tomasz; Wojciechowski, Kamil

    2016-01-01

    We describe the adsorption behaviour and rheological properties of a calf skin type I collagen, and of its hydrolysates obtained using a Clostridium histolyticum collagenase (CHC) under moderate conditions (pH 7, 37°C). The effect of CHC concentration (2×10(-9)-2×10(-6)M) and incubation time (35-85min) was studied and optimised to achieve the highest decrease of surface tension and the highest dilational surface viscoelasticity of the adsorbed layers. SDS-PAGE electrophoresis and reverse-phase high performance liquid chromatography (RP-HPLC) were used to characterise the hydrolysis products. The results show that even simple modifications (heat treatment, pH change, partial hydrolysis) of collagen enhances its surface properties, especially in terms of surface dilational elasticity modulus. The use of low enzyme concentration (CHC-to-collagen molar ratio of 4×10(-3)) and short incubation time (<45min) results in moderately hydrolysed products with the highest ability to lower surface tension (γ=53.9mNm(-1)) forming highly elastic adsorbed layers (surface dilational elasticity, E'=74.5mNm(-1)).

  10. Four communications between median and musculocutaneous nerves

    Directory of Open Access Journals (Sweden)

    Shukla L

    2010-11-01

    Full Text Available The present article is in reference to a case, encountered in routine dissection, displaying four sites of communication between the musculocutaneous and the median nerves, whereas in the literature not more than two communications have been reported.

  11. Allegheny County Median Age at Death

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — The median age at death is calculated for each municipality in Allegheny County. Data is based on the decedent's residence at the time of death, not the location...

  12. A weather type method to study surface ocean variables

    Science.gov (United States)

    Menendez, M.; Camus, P.; Mendez, F. J.; Losada, I. J.

    2012-04-01

    The set of methodologies for obtaining wave climate information at high spatial resolution from relatively coarse resolution is known as downscaling. Dynamic downscaling, based on the use of numerical models, is perhaps the most widely used methodology for surface ocean variables. An alternative approach is the statistical downscaling, that can be conducted by means of regression methods or weather pattern-based approaches. The main advantages of the statistical downscaling based on weather patterns are: the low computational requirements; the ease of implementation; the additional climatology information; and local forecast application. Moreover, this technique allows exploring the synoptic atmospheric climatology and their relationship with surface ocean variables. It is well known nowadays that the seasonal-to-interannual variability of wave climate is linked to the atmosphere circulation patterns. We proposed a statistical approach based on the predictand (eg. local wave characteristics) is associated to a particular synoptic-scale weather type (predictor). The predictor is the n-days-averaged sea level pressure field (SLP) anomalies, which are synthesized using data mining techniques to describe a number of weather types. In particular, we focus in NE Atlantic (NAO region) using as predictor the 3-days-averaged SLP fields calculated by NCEP atmospheric reanalysis (1948-2010). A principal component analysis is applied over SLP fields to reduce the spatial and temporal dimensions. The K-means clustering technique is then applied to the two-dimensional sample of the principal components which explain more than 95% variance of the SLP. The K-means technique divides the data space into a number of clusters, where each of them is characterized by a centroid and formed by the data for which the centroid is the nearest. Finally, we visualize the weather types associated to each centroid in an ordered way similar to self-organizing maps, SOMs. The probability

  13. Surface treatment method for cladding tube of LMFBR type reactor

    Energy Technology Data Exchange (ETDEWEB)

    Suda, Yoshitaka; Matsumoto, Kunio; Ito, Kenji.

    1994-06-07

    Upon surface finishing by polishing, shot peening or blasting is applied on the outer surface of a cladding tube to eliminate orientation of residual stresses on the surface layer in order to eliminate residual stresses formed on the outer surface in the circumferential direction. This can suppress occurrence of cracks in oxide membranes formed on the outer surface to suppress development of corrosion on the outer surface irrespective of the ingredient composition of fuel cladding tube made of zircaloy. (T.M.).

  14. Median nail dystrophy involving the thumb nail

    Directory of Open Access Journals (Sweden)

    Rahulkrishna Kota

    2016-01-01

    Full Text Available Median canaliform dystrophy of Heller is a rare entity characterized by a midline or a paramedian ridge or split and canal formation in nail plate of one or both the thumb nails. It is an acquired condition resulting from a temporary defect in the matrix that interferes with nail formation. Habitual picking of the nail base may be responsible for some cases. Histopathology classically shows parakeratosis, accumulation of melanin within and between the nail bed keratinocytes. Treatment of median nail dystrophy includes injectable triamcinalone acetonide, topical 0.1% tacrolimus, and tazarotene 0.05%, which is many a times challenging for a dermatologist. Psychiatric opinion should be taken when associated with the depressive, obsessive-compulsive, or impulse-control disorder. We report a case of 19-year-old male diagnosed as median nail dystrophy.

  15. Sosiaalisen median toimintasuunnitelma, case Guild Travel Ltd

    OpenAIRE

    Vanhanen, Anni

    2014-01-01

    Tämän työn tarkoituksena on luoda käyttökelpoinen sosiaalisen median markkinointi-suunnitelma lontoolaiselle matkatoimistolle, joka myy matkoja Suomeen. Työn toimek-siantaja on Guild Travel Ltd. Työ toteutettiin vuoden 2014 keväällä. Työssä esitellään toimeksiantaja matkailualan toimijana ja perehdytään markkinoinnin teoriaan. Käsittelyssä ovat useat eri markkinoinnin teoriat, kuten SOSTAC, SMART ja marketing mix. Näitä malleja hyödyntäen luodaan yrityksen sosiaalisen median toimin-tasuun...

  16. Sosiaalisen median merkitys asiakkaan ravintolan valinnalle

    OpenAIRE

    Virtanen, Tessa

    2014-01-01

    Tässä opinnäytetyössä tutkittiin sosiaalisen median merkitystä asiakkaan ravintolan valintaan. Opinnäytetyön toimeksiantajana oli HOK-Elanto. Opinnäytetyön tarkoituksena oli tuottaa tietoa ja ymmärrystä HOK-Elannolle sosiaalisen median vaikutuksesta asiakkaan ravintolapäätöksen tekoon HOK-Elannon ravintoloissa Opinnäytetyön tavoitteena oli selvittää, millainen ja kuinka suuri merkitys on sosiaalisella medialla ja sen erilaisilla yhteisöillä asiakkaan ostopäätökseen eli käyntiin HOK-Elanno...

  17. Adaptive weighted median filter utilizing impulsive noise detection

    Science.gov (United States)

    Ishihara, Jun; Meguro, Mitsuhiko; Hamada, Nozomu

    1999-10-01

    The removal of noise in image is one of the current important issues. It is also useful as a preprocessing for edge detection, motion estimation and so on. In this paper, an adaptive weighted median filter utilizing impulsive noise detection is proposed for the removal of impulsive noise in digital images. The aim of our proposed method is to eliminate impulsive noise effectively preserving original fine detail in images. This aim is same for another median-type nonlinear filters try to realized. In our method, we use weighted median filter whose weights should be determined by balancing between the signal preserving ability and noise reduction performance. The trade off between these two inconsistent properties is realized using the noise detection mechanism and optimized adaptation process. In the previous work, threshold value between the signal and the output of the median filter have to be decided for the noise detection. Adaptive algorithm for optimizing WM filters uses the teacher image for training process. In our method, following two new approaches are introduced in the filtering. (1) The noise detection process uses the discriminant method to the histogram distribution of the derivation from median filter output. (2) Filter weights which have been learned by uncorrupted pixels and their neighborhood without the original image are used for the restoration filtering for noise corrupted pixels. The validity of the proposed method is shown through some experimental results.

  18. Axially astigmatic surfaces: different types and their properties

    Science.gov (United States)

    Malacara-Doblado, Daniel; Malacara-Hernandez, Daniel; Garcia-Marquez, Jorge L.

    1996-12-01

    Axially astigmatic surfaces have different curvatures in orthogonal diameters. Toroidal and spherocylindrical optical surfaces are two mathematically different special cases of axially astigmatic surfaces as noted by Menchaca and Malacara (1986), but they are almost identical in the vicinity of the optical axis. The different between these two surfaces increases when the distance to the optical axis increases. We study the general properties of astigmatic surfaces and some special interesting cases.

  19. Plasma advanced glycation end products are associated with incident cardiovascular events in individuals with type 2 diabetes: a case-cohort study with a median follow-up of 10 years (EPIC-NL).

    Science.gov (United States)

    Hanssen, Nordin M J; Beulens, Joline W J; van Dieren, Susan; Scheijen, Jean L J M; van der A, Daphne L; Spijkerman, Annemieke M W; van der Schouw, Yvonne T; Stehouwer, Coen D A; Schalkwijk, Casper G

    2015-01-01

    Experimental data suggest a role for advanced glycation end products (AGEs) in cardiovascular disease (CVD), particularly in type 2 diabetes (T2DM). However, epidemiological evidence of an association between high plasma AGEs and increased cardiovascular risk remains inconclusive. Therefore, in a case-cohort study comprising 134 cardiovascular case subjects and a random subcohort of 218 individuals (including 65 cardiovascular case subjects), all with T2DM and nested in the European Prospective Investigation into Cancer and Nutrition in the Netherlands (EPIC-NL) study, plasma levels of protein-bound Nε-(carboxymethyl)lysine, Nε-(carboxyethyl)lysine, and pentosidine were measured with liquid chromatography. AGEs were loge-transformed, combined in a z-score, and the association with incident cardiovascular events was analyzed with Cox proportional hazard regression, adapted for case-cohort design (Prentice method). After multivariable adjustment (sex, age, cohort status, diabetes duration, total cholesterol to HDL-cholesterol ratio, smoking, systolic blood pressure, BMI, blood pressure-, cholesterol- and glucose-lowering treatment, prior cardiovascular events, and triglycerides), higher plasma AGE z-scores were associated with higher risk of incident cardiovascular events in individuals without prior cardiovascular events (hazard ratio 1.31 [95% CI: 1.06-1.61]). A similar trend was observed in individuals with prior cardiovascular events (1.37 [0.63-2.98]). In conclusion, high plasma AGEs were associated with incident cardiovascular events in individuals with T2DM. These results underline the potential importance of AGEs in development of CVD. © 2015 by the American Diabetes Association. Readers may use this article as long as the work is properly cited, the use is educational and not for profit, and the work is not altered.

  20. Rotation and surface abundance peculiarities in A-type stars

    CERN Document Server

    Takeda, Yoichi; Kang, Dong-Il; Lee, Byeong-Cheol; Kim, Kang-Min

    2008-01-01

    In an attempt of clarifying the connection between the photospheric abundance anomalies and the stellar rotation as well as of exploring the nature of "normal A" stars, the abundances of seven elements (C, O, Si, Ca, Ti, Fe, and Ba) and the projected rotational velocity for 46 A-type field stars were determined by applying the spectrum-fitting method to the high-dispersion spectral data obtained with BOES at BOAO. We found that the peculiarities (underabundances of C, O, and Ca; an overabundance of Ba) seen in slow rotators efficiently decrease with an increase of rotation, which almost disappear at v_e sin i > 100 km s^-1. This further suggests that stars with sufficiently large rotational velocity may retain the original composition at the surface without being altered. Considering the subsolar tendency (by several tenths dex below) exhibited by the elemental abundances of such rapidly-rotating (supposedly normal) A stars, we suspect that the gas metallicity may have decreased since our Sun was born, contra...

  1. Median Citation Index vs Journal Impact Factor

    Science.gov (United States)

    Antonoyiannakis, Manolis

    2015-03-01

    The Journal Impact Factor is an arithmetic mean: It is the average number of citations, in a year, to a journal's articles that were published the previous two years. But for the vast majority of scholarly journals, the distribution of these citations is skewed (non-symmetric). We argue that a more representative member of the skewed distribution of citations is its median, not the mean. We thus introduce the Median Citation Index (MCI) and compare it to the journal Impact Factor (JIF) as a potentially more suitable choice of the ``center'' of the distribution, or its typical value. Unlike the JIF, the MCI is far less sensitive to outlier (very highly cited) papers or to gaming, and does not lend itself to the hype of calculating it to three decimal digits.

  2. Median sternotomy closure: review and update research

    Institute of Scientific and Technical Information of China (English)

    Hua Kun; Yang Xiubin

    2009-01-01

    Cardiac surgery is a very common operation nowadays all over the world. Median stemotomy is a routine procedure required for cardiac access during open heart surgery. The complications of this procedure after the cardiac surgery range from 0.7% to 1.5% of all cases, and bear a high mortality rate if they occur. Every individual surgeon must pay great attention on every detail during the sternal closure. This article shows the details as to conventional information and updated progress on median sternotomy closure. The update contents involve in biomechanics, number of wires twists, biomaterial and so on.According to our experience, we recommend four peristernal single/double steel wires for sternal closure as our optimal choice.

  3. COLOUR IMAGE STEGANOGRAPHY USING MEDIAN MAINTENANCE

    Directory of Open Access Journals (Sweden)

    S. Arivazhagan

    2011-08-01

    Full Text Available Steganographic algorithms in the recent past have been producing stego images with perceptual invisibility, better secrecy and certain robustness against attacks like cropping, filtering etc. Recovering a good quality secret from a good quality stego image may not always be possible. The method proposed in this paper works in transform domain and attempts to extract the secret almost as same as the embedded one maintaining minimal changes to the cover image by using techniques like median maintenance, offset and quantization.

  4. Shoulder posture and median nerve sliding

    Directory of Open Access Journals (Sweden)

    Dilley Andrew

    2004-07-01

    Full Text Available Abstract Background Patients with upper limb pain often have a slumped sitting position and poor shoulder posture. Pain could be due to poor posture causing mechanical changes (stretch; local pressure that in turn affect the function of major limb nerves (e.g. median nerve. This study examines (1 whether the individual components of slumped sitting (forward head position, trunk flexion and shoulder protraction cause median nerve stretch and (2 whether shoulder protraction restricts normal nerve movements. Methods Longitudinal nerve movement was measured using frame-by-frame cross-correlation analysis from high frequency ultrasound images during individual components of slumped sitting. The effects of protraction on nerve movement through the shoulder region were investigated by examining nerve movement in the arm in response to contralateral neck side flexion. Results Neither moving the head forward or trunk flexion caused significant movement of the median nerve. In contrast, 4.3 mm of movement, adding 0.7% strain, occurred in the forearm during shoulder protraction. A delay in movement at the start of protraction and straightening of the nerve trunk provided evidence of unloading with the shoulder flexed and elbow extended and the scapulothoracic joint in neutral. There was a 60% reduction in nerve movement in the arm during contralateral neck side flexion when the shoulder was protracted compared to scapulothoracic neutral. Conclusion Slumped sitting is unlikely to increase nerve strain sufficient to cause changes to nerve function. However, shoulder protraction may place the median nerve at risk of injury, since nerve movement is reduced through the shoulder region when the shoulder is protracted and other joints are moved. Both altered nerve dynamics in response to moving other joints and local changes to blood supply may adversely affect nerve function and increase the risk of developing upper quadrant pain.

  5. Medians and means in Finsler geometry

    CERN Document Server

    Arnaudon, Marc

    2010-01-01

    We investigate existence and uniqueness of p-means and the median of a probability measure on a Finsler manifold, in relation with the convexity of the support of the measure. We prove that the p-mean is the limit point of a continuous time gradient flow. Under some additional condition which is always satisfied for larger than or equal to 2, a discretization of this path converges to the p-mean. This provides an algorithm for determining those Finsler center points.

  6. Robust non-local median filter

    Science.gov (United States)

    Matsuoka, Jyohei; Koga, Takanori; Suetake, Noriaki; Uchino, Eiji

    2017-04-01

    This paper describes a novel image filter with superior performance on detail-preserving removal of random-valued impulse noise superimposed on natural gray-scale images. The non-local means filter is in the limelight as a way of Gaussian noise removal with superior performance on detail preservation. By referring the fundamental concept of the non-local means, we had proposed a non-local median filter as a specialized way for random-valued impulse noise removal so far. In the non-local processing, the output of a filter is calculated from pixels in blocks which are similar to the block centered at a pixel of interest. As a result, aggressive noise removal is conducted without destroying the detailed structures in an original image. However, the performance of non-local processing decreases enormously in the case of high noise occurrence probability. A cause of this problem is that the superimposed noise disturbs accurate calculation of the similarity between the blocks. To cope with this problem, we propose an improved non-local median filter which is robust to the high level of corruption by introducing a new similarity measure considering possibility of being the original signal. The effectiveness and validity of the proposed method are verified in a series of experiments using natural gray-scale images.

  7. Inference with the Median of a Prior

    Directory of Open Access Journals (Sweden)

    Ali Mohammad-Djafari

    2006-06-01

    Full Text Available We consider the problem of inference on one of the two parameters of a probability distribution when we have some prior information on a nuisance parameter. When a prior probability distribution on this nuisance parameter is given, the marginal distribution is the classical tool to account for it. If the prior distribution is not given, but we have partial knowledge such as a fixed number of moments, we can use the maximum entropy principle to assign a prior law and thus go back to the previous case. In this work, we consider the case where we only know the median of the prior and propose a new tool for this case. This new inference tool looks like a marginal distribution. It is obtained by first remarking that the marginal distribution can be considered as the mean value of the original distribution with respect to the prior probability law of the nuisance parameter, and then, by using the median in place of the mean.

  8. On the relationship between the snowflake type aloft and the surface precipitation types at temperatures near 0 °C

    Science.gov (United States)

    Sankaré, Housseyni; Thériault, Julie M.

    2016-11-01

    Winter precipitation types can have major consequences on power outages, road conditions and air transportation. The type of precipitation reaching the surface depends strongly on the vertical temperature of the atmosphere, which is often composed of a warm layer aloft and a refreezing layer below it. A small variation of the vertical structure can lead to a change in the type of precipitation near the surface. It has been shown in previous studies that the type of precipitation depends also on the precipitation rate, which is directly linked to the particle size distribution and that a difference as low as 0.5 °C in the vertical temperature profile could change the type of precipitation near the surface. Given the importance of better understanding the formation of winter precipitation type, the goal of this study is to assess the impact of the snowflake habit aloft on the type of precipitation reaching the surface when the vertical temperature is near 0 °C. To address this, a one dimensional cloud model coupled with a bulk microphysics scheme was used. Four snowflake types (dendrite, bullet, column and graupel) have been added to the scheme. The production of precipitation at the surface from these types of snow has been compared to available observations. The results showed that the thickness of the snow-rain transition is four times deeper when columns and graupel only fall through the atmosphere compared to dendrites. Furthermore, a temperature of the melting layer that is three (four) times warmer is required to completely melt columns and graupel (dendrites). Finally, the formation of freezing rain is associated with the presence of lower density snowflakes (dendrites) aloft compared to the production of ice pellets (columns). Overall, this study demonstrated that the type of snowflakes has an impact on the type of precipitation reaching the surface when the temperature is near 0 °C.

  9. Decomposition of integrable holomorphic quadratic differential on Riemann surface of infinite type

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In this paper,decomposition of the integrable holomorphic quadratic differential on Riemann surface of infinite type is studied.Hubbard,Schleicher and Shishikura gave a thick-thin decomposition on Riemann surface of finite type with an integrable holomorphic quadratic differential and they thought their result might be generalized to arbitrary hyperbolic Riemann surface of infinite type.We confirm what they thought is right and give a proposition(Proposition 2.2) of its own interest.

  10. Robust Mediation Analysis Based on Median Regression

    Science.gov (United States)

    Yuan, Ying; MacKinnon, David P.

    2014-01-01

    Mediation analysis has many applications in psychology and the social sciences. The most prevalent methods typically assume that the error distribution is normal and homoscedastic. However, this assumption may rarely be met in practice, which can affect the validity of the mediation analysis. To address this problem, we propose robust mediation analysis based on median regression. Our approach is robust to various departures from the assumption of homoscedasticity and normality, including heavy-tailed, skewed, contaminated, and heteroscedastic distributions. Simulation studies show that under these circumstances, the proposed method is more efficient and powerful than standard mediation analysis. We further extend the proposed robust method to multilevel mediation analysis, and demonstrate through simulation studies that the new approach outperforms the standard multilevel mediation analysis. We illustrate the proposed method using data from a program designed to increase reemployment and enhance mental health of job seekers. PMID:24079925

  11. Ultra Low-Power Analog Median Filters

    Directory of Open Access Journals (Sweden)

    A. Diaz-Sanchez

    2013-09-01

    Full Text Available The design and implementation of three analog median filter topologies, whose transistors operate in the deep weak-inversion region, is described. The first topology is a differential pairs array, in which drain currents are driven into two nodes in a differential fashion, while the second topology is based on a wide range OTA, which is used to maximize the dynamic range. Finally, the third topology uses three range-extended OTAs. The proposed weak-inversion filters were designed and fabricated in ON Semiconductor 0.5 micrometer technology through MOSIS. Experimental results of three-input fabricated prototypes for all three topologies are show, where power consumptions of 90nW in the first case, and 270nW in the other two cases can be noticed. A dual power supply +/-1.5 Volts were used.

  12. Global luminous efficacies on vertical surfaces for all sky types

    Energy Technology Data Exchange (ETDEWEB)

    Soler, A. [E.T.S. Arquitectura, Madrid (Spain). Dpto. de Fisica e Instalaciones Aplicados; Universidad Politecnico de Madrid (Spain). Facultad de Ciencias Ambientales; Robledo, L. [Universidad Politecnica de Madrid (Spain). Dpto. Sistemas Intelligentes Aplicados

    2000-02-01

    Luminous efficacies are determined at Madrid for North, South, East, West facing surfaces in two ways: by taking into account all the global illuminance and irradiance values available, and by considering data for each of three sky categories as defined from values of the sky clearness index {epsilon}' and the sky brightness index {delta}. Both methods are compared, and for {epsilon}' < 1.23 (overcast skies) the second method is found to be more accurate than the first. (author)

  13. Male median raphe cysts: serial retrospective analysis and histopathological classification

    Directory of Open Access Journals (Sweden)

    Shao I-Hung

    2012-09-01

    Full Text Available Abstract Background To review the clinical and pathological characteristics of median raphe cysts and to classify the lesions according to pathogenesis and histopathological findings. Methods The medical records of patients who were diagnosed with median raphe cysts between 2001 and 2010 were reviewed to document the clinical presentation and pathological findings of the cysts. Results Most patients were asymptomatic; however, 9 patients had inflammatory or infectious cysts that were tender or painful. Four patients who had cysts on the parameatus and distal prepuce had difficulty voiding. Hematuria and hematospermia were noted in 2 cases. Thirty-one cysts were lined with an urothelium-like epithelium, and a squamous epithelium lining was found in 3 cases. In 2 cases, a well-formed mucinous glandular structure was observed. The other 20 cysts consisted of mixed epithelia. After excision of the cysts under local or general anesthesia, an urethral fistula developed as a complication in only 1 case. Conclusions Median raphe cysts are benign lesions formed due to tissue trapping during the development of urethral folds. The cysts can be defined into 4 types based on pathological findings: urethral, epidermoid, glandular, and mixed. The associated symptoms and signs should be taken into consideration when determining the treatment for the cysts. Virtual slides The virtual slide(s for this article can be found here: http//http://www.diagnosticpathology.diagnomx.eu/vs/7727074877500751

  14. Conformal Wasserstein Distance: Comparing disk and sphere-type surfaces in polynomial time II, computational aspects

    CERN Document Server

    Lipman, Yaron; Daubechies, Ingrid

    2011-01-01

    This paper is a companion paper to [Lipman and Daubechies 2011]. We provide numerical procedures and algorithms for computing the alignment of and distance between two disk type surfaces. We furthermore generalize the framework to support sphere-type surfaces, prove a result connecting this distance to geodesic distortion, and provide convergence analysis on the discrete approximation to the arising mass-transportation problems.

  15. Modeling of type-2 fuzzy cubic B-spline surface for flood data problem in Malaysia

    Science.gov (United States)

    Bidin, Mohd Syafiq; Wahab, Abd. Fatah

    2017-08-01

    Malaysia possesses a low and sloping land areas which may cause flood. The flood phenomenon can be analyzed if the surface data of the study area can be modeled by geometric modeling. Type-2 fuzzy data for the flood data is defined using type-2 fuzzy set theory in order to solve the uncertainty of complex data. Then, cubic B-spline surface function is used to produce a smooth surface. Three main processes are carried out to find a solution to crisp type-2 fuzzy data which is fuzzification (α-cut operation), type-reduction and defuzzification. Upon conducting these processes, Type-2 Fuzzy Cubic B-Spline Surface Model is applied to visualize the surface data of the flood areas that are complex uncertainty.

  16. Neural Organization of the Median Ocellus of the Dragonfly

    Science.gov (United States)

    Dowling, John E.; Chappell, Richard L.

    1972-01-01

    Two types of presumed synaptic contacts have been recognized by electron microscopy in the synaptic plexus of the median ocellus of the dragonfly. The first type is characterized by an electron-opaque, button-like organelle in the presynaptic cytoplasm, surrounded by a cluster of synaptic vesicles. Two postsynaptic elements are associated with these junctions, which we have termed button synapses. The second synaptic type is characterized by a dense cluster of synaptic vesicles adjacent to the presumed presynaptic membrane. One postsynaptic element is observed at these junctions. The overwhelming majority of synapses seen in the plexus are button synapses. They are found most commonly in the receptor cell axons where they synaptically contact ocellar nerve dendrites and adjacent receptor cell axons. Button synapses are also seen in the ocellar nerve dendrites where they appear to make synapses back onto receptor axon terminals as well as onto adjacent ocellar nerve dendrites. Reciprocal and serial synaptic arrangements between receptor cell axon terminals, and between receptor cell axon terminals and ocellar nerve dendrites are occasionally seen. It is suggested that the lateral and feedback synapses in the median ocellus of the dragonfly play a role in enhancing transients in the postsynaptic responses. PMID:5049076

  17. The transient response for different types of erodable surface thermocouples using finite element analysis

    Directory of Open Access Journals (Sweden)

    Mohammed Hussein

    2007-01-01

    Full Text Available The transient response of erodable surface thermocouples has been numerically assessed by using a two dimensional finite element analysis. Four types of base metal erodable surface thermocouples have been examined in this study, included type-K (alumel-chromel, type-E (chromel-constantan, type-T (copper-constantan, and type-J (iron-constantan with 50 mm thick- ness for each. The practical importance of these types of thermocouples is to be used in internal combustion engine studies and aerodynamics experiments. The step heat flux was applied at the surface of the thermocouple model. The heat flux from the measurements of the surface temperature can be commonly identified by assuming that the heat transfer within these devices is one-dimensional. The surface temperature histories at different positions along the thermocouple are presented. The normalized surface temperature histories at the center of the thermocouple for different types at different response time are also depicted. The thermocouple response to different heat flux variations were considered by using a square heat flux with 2 ms width, a sinusoidal surface heat flux variation width 10 ms period and repeated heat flux variation with 2 ms width. The present results demonstrate that the two dimensional transient heat conduction effects have a significant influence on the surface temperature history measurements made with these devices. It was observed that the surface temperature history and the transient response for thermocouple type-E are higher than that for other types due to the thermal properties of this thermocouple. It was concluded that the thermal properties of the surrounding material do have an impact, but the properties of the thermocouple and the insulation materials also make an important contribution to the net response.

  18. Solitary median maxillary central incisor (SMMCI syndrome

    Directory of Open Access Journals (Sweden)

    Hall Roger K

    2006-04-01

    Full Text Available Abstract Solitary median maxillary central incisor syndrome (SMMCI is a complex disorder consisting of multiple, mainly midline defects of development resulting from unknown factor(s operating in utero about the 35th–38th day(s from conception. It is estimated to occur in 1:50,000 live births. Aetiology is uncertain. Missense mutation in the SHH gene (I111F at 7q36 may be associated with SMMCI. The SMMCI tooth differs from the normal central incisor, in that the crown form is symmetric; it develops and erupts precisely in the midline of the maxillary dental arch in both primary and permanent dentitions. Congenital nasal malformation (choanal atresia, midnasal stenosis or congenital pyriform aperture stenosis is positively associated with SMMCI. The presence of an SMMCI tooth can predict associated anomalies and in particular the serious anomaly holoprosencephaly. Common congenital anomalies associated with SMMCI are: severe to mild intellectual disability, congenital heart disease, cleft lip and/or palate and less frequently, microcephaly, hypopituitarism, hypotelorism, convergent strabismus, oesophageal and duodenal atresia, cervical hemivertebrae, cervical dermoid, hypothyroidism, scoliosis, absent kidney, micropenis and ambiguous genitalia. Short stature is present in half the children. Diagnosis should be made by eight months of age, but can be made at birth and even prenatally at 18–22 weeks from the routine mid-trimester ultrasound scan. Management depends upon the individual anomalies present. Choanal stenosis requires emergency surgical treatment. Short stature may require growth hormone therapy. SMMCI tooth itself is mainly an aesthetic problem, which is ideally managed by combined orthodontic, prosthodontic and oral surgical treatment; alternatively, it can be left untreated.

  19. Mapping impervious surface type and sub-pixel abundance using hyperion hyperspectral imagery

    Science.gov (United States)

    Falcone, J.A.; Gomez, R.

    2005-01-01

    Impervious surfaces have been identified as an important and quantifiable indicator of environmental degradation in urban settings. A number of research efforts have been directed at mapping impervious surface type using multispectral imagery. To date, however, no studies have compared equivalent techniques using multispectral and hyperspectral imagery to that end. In this study, data from NASA's 220-channel Hyperion instrument were used to: a) delineate three types of impervious surface, and b) map sub-pixel percent abundance for a study site near Washington, D.C., USA. The results were compared with the results of similar methods using same-spatial-resolution Landsat ETM+ data for mapping impervious surface type, and with the results of the U.S. Geological Survey's National Land Cover Data (NLCD) 2001 impervious surface data layer, which is derived from Landsat and high-resolution Ikonos data. The accuracy of discriminating impervious surface type using Hyperion data was assessed at 88% versus Landsat at 59%. The sub-pixel percent impervious map corresponded well with the NLCD 2001; impervious surface in the study area was calculated at 29.3% for NLCD 2001 and 28.4% for the Hyperion-derived layer. The results suggest that fairly simple techniques using hyperspectral data are effective for quantifying impervious surface type, and that high-spectral- resolution imagery may be a good alternative to high-spatial-resolution data.

  20. Surface flow types, near-bed hydraulics and the distribution of stream macroinvertebrates

    Directory of Open Access Journals (Sweden)

    M. A. Reid

    2008-07-01

    Full Text Available Spatial variation in hydraulic conditions in streams often results in distinct water surface patterns, or surface flow types. Visual assessments of the distribution of surface flow types have been used to provide rapid assessment of the habitat heterogeneity. The efficacy of this approach is predicated on the notion that surface flow types consistently represent a distinct suite of hydraulic conditions with biological relevance. This study tested this notion, asking three specific questions. First, do surface flow types provide a characterisation of physical habitat that is relevant to macroinvertebrates? Second, how well do near-bed hydraulic conditions explain macroinvertebrate distributions? Third, what components of near-bed hydraulic conditions exert the strongest influence on macroinvertebrate distributions?

    Results show that hydraulic conditions (incorporating direct measurements of near-bed velocity and turbulence in three dimensions and substratum character (incorporating estimates of particle size distribution, and biofilm and macrophyte cover within each surface flow type were largely distinct and that macroinvertebrate assemblages differed across flow types in taxon richness and assemblage composition, thus supporting the notion that rapid assessments of surface flow type distributions provide biologically relevant information.

    Macroinvertebrate assemblages were most strongly correlated with water depth, size of a flow type patch, near-bed velocity in the downstream direction, turbulence in the transverse direction, % pebble, % sand, % silt and clay and macrophyte cover. This study suggests that surface flow type mapping provides an assessment of physical habitat that is relevant to macroinvertebrates. The strong relationship detected between macroinvertebrate assemblages and transverse turbulence also highlights the value of directly measuring near-bed hydraulics. Further investigations are required to test the

  1. Surface flow types, near-bed hydraulics and the distribution of stream macroinvertebrates

    Directory of Open Access Journals (Sweden)

    M. A. Reid

    2008-03-01

    Full Text Available Spatial variation in hydraulic conditions in streams often results in distinct water surface patterns, or surface flow types. Visual assessments of the distribution of surface flow types have been used to provide rapid assessment of habitat heterogeneity. The efficacy of this approach is predicated on the notion that surface flow types consistently represent a distinct suite of hydraulic conditions with biological relevance. This study tested this notion, asking three specific questions. First, do surface flow types provide a characterisation of physical habitat that is relevant to macroinvertebrates? Second, how well do near-bed hydraulic conditions explain macroinvertebrate distributions? Third, what components of near-bed hydraulic conditions exert the strongest influence on macroinvertebrate distributions?

    Results show that hydraulic conditions (incorporating direct measurements of near-bed velocity and turbulence in three dimensions and substratum character (incorporating estimates of particle size distribution, and biofilm and macrophyte cover within each surface flow type were largely distinct and that macroinvertebrate assemblages differed across flow types in taxon richness and assemblage composition, thus supporting the notion that rapid assessments of surface flow type distributions provide biologically relevant information.

    Macroinvertebrate assemblages were most strongly correlated with water depth, size of a flow type patch, near-bed velocity in the downstream direction, turbulence in the transverse direction, % pebble, % sand, % silt and clay and macrophyte cover. This study suggests that surface flow type mapping provides an assessment of physical habitat that is relevant to macroinvertebrates. The strong relationship detected between macroinvertebrate assemblages and transverse turbulence also highlights the value of directly measuring near-bed hydraulics. Further investigations are required to test the

  2. Investigation of synthetic aperture methods in ultrasound surface imaging using elementary surface types.

    Science.gov (United States)

    Kerr, W; Pierce, S G; Rowe, P

    2016-12-01

    Synthetic aperture imaging methods have been employed widely in recent research in non-destructive testing (NDT), but uptake has been more limited in medical ultrasound imaging. Typically offering superior focussing power over more traditional phased array methods, these techniques have been employed in NDT applications to locate and characterise small defects within large samples, but have rarely been used to image surfaces. A desire to ultimately employ ultrasonic surface imaging for bone surface geometry measurement prior to surgical intervention motivates this research, and results are presented for initial laboratory trials of a surface reconstruction technique based on global thresholding of ultrasonic 3D point cloud data. In this study, representative geometry artefacts were imaged in the laboratory using two synthetic aperture techniques; the Total Focusing Method (TFM) and the Synthetic Aperture Focusing Technique (SAFT) employing full and narrow synthetic apertures, respectively. Three high precision metallic samples of known geometries (cuboid, sphere and cylinder) which featured a range of elementary surface primitives were imaged using a 5MHz, 128 element 1D phased array employing both SAFT and TFM approaches. The array was manipulated around the samples using a precision robotic positioning system, allowing for repeatable ultrasound derived 3D surface point clouds to be created. A global thresholding technique was then developed that allowed the extraction of the surface profiles, and these were compared with the known geometry samples to provide a quantitative measure of error of 3D surface reconstruction. The mean errors achieved with optimised SAFT imaging for the cuboidal, spherical and cylindrical samples were 1.3mm, 2.9mm and 2.0mm respectively, while those for TFM imaging were 3.7mm, 3.0mm and 3.1mm, respectively. These results were contrary to expectations given the higher information content associated with the TFM images. However, it was

  3. Genetic adaptation of Streptococcus mutans during biofilm formation on different types of surfaces

    Directory of Open Access Journals (Sweden)

    Aharoni Reuven

    2010-02-01

    Full Text Available Abstract Background Adhesion and successful colonization of bacteria onto solid surfaces play a key role in biofilm formation. The initial adhesion and the colonization of bacteria may differ between the various types of surfaces found in oral cavity. Therefore, it is conceivable that diverse biofilms are developed on those various surfaces. The aim of the study was to investigate the molecular modifications occurring during in vitro biofilm development of Streptococcus mutans UA159 on several different dental surfaces. Results Growth analysis of the immobilized bacterial populations generated on the different surfaces shows that the bacteria constructed a more confluent and thick biofilms on a hydroxyapatite surface compared to the other tested surfaces. Using DNA-microarray technology we identified the differentially expressed genes of S. mutans, reflecting the physiological state of biofilms formed on the different biomaterials tested. Eight selected genes were further analyzed by real time RT-PCR. To further determine the impact of the tested material surfaces on the physiology of the bacteria, we tested the secretion of AI-2 signal by S. mutans embedded on those biofilms. Comparative transcriptome analyses indicated on changes in the S. mutans genome in biofilms formed onto different types of surfaces and enabled us to identify genes most differentially expressed on those surfaces. In addition, the levels of autoinducer-2 in biofilms from the various tested surfaces were different. Conclusions Our results demonstrate that gene expression of S. mutans differs in biofilms formed on tested surfaces, which manifest the physiological state of bacteria influenced by the type of surface material they accumulate onto. Moreover, the stressful circumstances of adjustment to the surface may persist in the bacteria enhancing intercellular signaling and surface dependent biofilm formation.

  4. Sensitivity of surface air temperature change to land use/cover types in China

    Institute of Scientific and Technical Information of China (English)

    YANG XuChao; ZHANG YiLi; LIU LinShan; ZHANG Wei; DING MingJun; WANG ZhaoFeng

    2009-01-01

    Using CRU high resolution grid observational temperature and ERA40 reanalysie surface air temperature data during 1960--1999, we investigated the sensitivity of surface air temperature change to land use/cover types in China by subtracting the reanalysis from the observed surface air temperature (observation minus reanalysis, OMR). The results show that there is a stable and systemic impact of land use/cover types on surface air temperature. The surface warming of each land use/cover type reacted differently to global warming. The OMR trends of unused land (≥0.17℃/decade), mainly comprised by sandy land, Gobi and bare rock gravel land, are obviously larger than those of the other land use/cover types. The OMR over grassland, farmland and construction land shows a moderate decadal a significant warming trend (0.06"C/decade). The overall assessment indicates that the surface warming is larger for areas that are barren and anthropogenically developed. The better the vegetation cover, the smaller the OMR warming trend. Responses of surface air temperature to land use/cover types with similar physical and chemical properties and biological processes have no significant difference. The surface air temperature would not react significantly until the intensity of land cover changes reach a certain degree. Within the same land use/cover type, areas in eastern China with intensive human activities exhibit larger warming trend. The results provide observational evidence for modeling research on the impact of land use/cover change on regional climate. Thus, projecting further surface climate of China in regional scale should not only take greenhouse gas increase into account, but also consider the impact of land use/cover types and land cover change.

  5. Sensitivity of surface air temperature change to land use/cover types in China

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Using CRU high resolution grid observational temperature and ERA40 reanalysis surface air temperature data during 1960-1999, we investigated the sensitivity of surface air temperature change to land use/cover types in China by subtracting the reanalysis from the observed surface air temperature (observation minus reanalysis, OMR). The results show that there is a stable and systemic impact of land use/cover types on surface air temperature. The surface warming of each land use/cover type reacted differently to global warming. The OMR trends of unused land (≥0.17℃/decade), mainly comprised by sandy land, Gobi and bare rock gravel land, are obviously larger than those of the other land use/cover types. The OMR over grassland, farmland and construction land shows a moderate decadal warming about 0.12℃ /decade, 0.10℃/decade, 0.12 ℃ /decade, respectively. Woodland areas do not show a significant warming trend (0.06 ℃ /decade). The overall assessment indicates that the surface warming is larger for areas that are barren and anthropogenically developed. The better the vegetation cover, the smaller the OMR warming trend. Responses of surface air temperature to land use/cover types with similar physical and chemical properties and biological processes have no significant difference. The surface air temperature would not react significantly until the intensity of land cover changes reach a certain degree. Within the same land use/cover type, areas in eastern China with intensive human activities exhibit larger warming trend. The results provide observational evidence for modeling research on the impact of land use/cover change on regional climate. Thus, projecting further surface climate of China in regional scale should not only take greenhouse gas increase into account, but also consider the impact of land use/cover types and land cover change.

  6. Electrodiagnostic Studies of Median and Ulnar Nerves in Cyclists.

    Science.gov (United States)

    Jackson, D L

    1989-09-01

    In brief: Twenty long-distance cyclists (13 men, 7 women) completed a questionnaire and underwent a neurologic examination and electrodiagnostic studies of the median and ulnar nerves. The purpose was to determine the frequency, severity, and clinical significance of numbness or pain in the hand or wrist and to assess the correlation of electrodiagnostic findings with these complaints. Results of the studies were normal for all 20 cyclists, nine of whom reported symptoms. These cyclists attributed their discomfort to prolonged riding without changing hand position, especially on rough road surfaces. They also reported that their symptoms diminished after they modified their cycling technique and adjusted their bicycle to better fit their body dimensions.

  7. High quality crystalline silicon surface passivation by combined intrinsic and n-type hydrogenated amorphous silicon

    NARCIS (Netherlands)

    Schuttauf, J.A.; van der Werf, C.H.M.; Kielen, I.M.; van Sark, W.G.J.H.M.; Rath, J.K.

    2011-01-01

    We investigate the influence of thermal annealing on the passivation quality of crystalline silicon (c-Si) surfaces by intrinsic and n-type hydrogenated amorphous silicon (a-Si:H) films. For temperatures up to 255 C, we find an increase in surface passivation quality, corresponding to a decreased da

  8. Fluoride adsorption on goethite in relation to different types of surface sites

    NARCIS (Netherlands)

    Hiemstra, T.; Riemsdijk, van W.H.

    2000-01-01

    Metal (hydr)oxides have different types of surface groups. Fluoride ions have been used as a probe to assess the number of surface sites. We have studied the F− adsorption on goethite by measuring the F− and H interaction and F− adsorption isotherms. Fluoride ions exchange against singly coordinated

  9. Intraneural fibroma of the median nerve at the wrist.

    Science.gov (United States)

    Burrows, Anthony M; Folpe, Andrew L; Wenger, Doris E; Spinner, Robert J

    2014-06-01

    Distal median neuropathy from carpal tunnel syndrome is the most well known lesion affecting the median nerve. Mass lesions may affect the nerve at the wrist. We present to our knowledge the first histologically confirmed case of an intraneural fibroma.

  10. The outer disks of early-type galaxies. I. Surface-brightness profiles of barred galaxies

    NARCIS (Netherlands)

    Erwin, Peter; Pohlen, Michael; Beckman, John E.

    2008-01-01

    We present a study of 66 barred, early-type (S0-Sb) disk galaxies, focused on the disk surface brightness profile outside the bar region, with the aim of throwing light on the nature of Freeman type I and II profiles, their origins, and their possible relation to disk truncations. This paper discuss

  11. The outer disks of early-type galaxies. I. Surface-brightness profiles of barred galaxies

    NARCIS (Netherlands)

    Erwin, Peter; Pohlen, Michael; Beckman, John E.

    We present a study of 66 barred, early-type (S0-Sb) disk galaxies, focused on the disk surface brightness profile outside the bar region, with the aim of throwing light on the nature of Freeman type I and II profiles, their origins, and their possible relation to disk truncations. This paper

  12. EMG MEDIAN POWER FREQUENCY IN AN EXHAUSTING EXERCISE

    NARCIS (Netherlands)

    AMENT, W; BONGA, GJJ; HOF, AL; VERKERKE, GJ

    1993-01-01

    EMG median power frequency of the calf muscles was investigated during an exhausting treadmill exercise. This exercise was an uphill run, the average endurance time was 1.5 min. Median power frequency of the calf muscles declined by more than 10% during this exercise. In addition EMG median power fr

  13. EMG MEDIAN POWER FREQUENCY IN AN EXHAUSTING EXERCISE

    NARCIS (Netherlands)

    AMENT, W; BONGA, GJJ; HOF, AL; VERKERKE, GJ

    1993-01-01

    EMG median power frequency of the calf muscles was investigated during an exhausting treadmill exercise. This exercise was an uphill run, the average endurance time was 1.5 min. Median power frequency of the calf muscles declined by more than 10% during this exercise. In addition EMG median power fr

  14. Capability of LEP-type surfaces to describe noncollinear reactions 2 - Polyatomic systems

    CERN Document Server

    Espinosa-Garcia, Joaquin

    2001-01-01

    In this second article of the series, the popular LEP-type surface for collinear reaction paths and a "bent" surface, which involves a saddle point geometry with a nonlinear central angle, were used to examine the capacity of LEP-type surfaces to describe the kinetics and dynamics of noncollinear reaction paths in polyatomic systems. Analyzing the geometries, vibrational frequencies, curvature along the reaction path (to estimate the tunneling effect and the reaction coordinate-bound modes coupling), and the variational transition- state theory thermal rate constants for the NH//3 + O(**3P) reaction, we found that the "collinear" LEP-type and the "bent" surfaces for this polyatomic system show similar behavior, thus allowing a considerable saving in time and computational effort. This agreement is especially encouraging for this polyatomic system because in the Cs symmetry the reaction proceeds via two electronic states of symmetries **3A prime and **3A double prime , which had to be independently calibrated....

  15. Developing Land Surface Type Map with Biome Classification Scheme Using Suomi NPP/JPSS VIIRS Data

    Science.gov (United States)

    Zhang, Rui; Huang, Chengquan; Zhan, Xiwu; Jin, Huiran

    2016-08-01

    Accurate representation of actual terrestrial surface types at regional to global scales is an important element for a wide range of applications, such as land surface parameterization, modeling of biogeochemical cycles, and carbon cycle studies. In this study, in order to meet the requirement of the retrieval of global leaf area index (LAI) and fraction of photosynthetically active radiation absorbed by the vegetation (fPAR) and other studies, a global map generated from Suomi National Polar- orbiting Partnership (S-NPP) Visible Infrared Imaging Radiometer Suite (VIIRS) surface reflectance data in six major biome classes based on their canopy structures, which include: Grass/Cereal Crops, Shrubs, Broadleaf Crops, Savannas, Broadleaf Forests, and Needleleaf Forests, was created. The primary biome classes were converted from an International Geosphere-Biosphere Program (IGBP) legend global surface type data that was created in previous study, and the separation of two crop types are based on a secondary classification.

  16. A method for increasing the surface area of perovskite-type oxides

    Indian Academy of Sciences (India)

    S Banerjee; V R Choudhary

    2000-10-01

    A method based on hydrothermal treatments is described for increasing the surface area of sintered ABO3-type perovskite oxides. Influence of hydrothermal treatments, such as water treatment at 125-300°C under autogeneous pressure and steam treatment at 350-800°C, to low surface area (or sintered) LaCoO3 and LaMnO3 perovskite oxides on their surface properties (viz. surface area, crystal size and morphology and surface La/(Co or Mn) ratio) and also catalytic activity in complete combustion of methane at different temperatures (450-600°C) has been thoroughly investigated. The hydrothermal treatments result in the activation of the perovskite oxides by increasing their surface area very markedly.

  17. Excitation and propagation of shear-horizontal-type surface and bulk acoustic waves.

    Science.gov (United States)

    Hashimoto, K Y; Yamaguchi, M

    2001-09-01

    This paper reviews the basic properties of shear-horizontal (SH)-type surface acoustic waves (SAWs) and bulk acoustic waves (BAWs). As one of the simplest cases, the structure supporting Bleustein-Gulyaev-Shimizu waves is considered, and their excitation and propagation are discussed from various view points. First, the formalism based on the complex integral theory is presented, where the surface is assumed to be covered with an infinitesimally thin metallic film, and it is shown how the excitation and propagation of SH-type waves are affected by the surface perturbation. Then, the analysis is extended to a periodic grating structure, and the behavior of SH-type SAWs under the grating structure is discussed. Finally, the origin of the leaky nature is explained.

  18. Medians and means in Riemannian geometry: existence, uniqueness and computation

    CERN Document Server

    Arnaudon, Marc; Yang, Le

    2011-01-01

    This paper is a short summary of our recent work on the medians and means of probability measures in Riemannian manifolds. Firstly, the existence and uniqueness results of local medians are given. In order to compute medians in practical cases, we propose a subgradient algorithm and prove its convergence. After that, Fr\\'echet medians are considered. We prove their statistical consistency and give some quantitative estimations of their robustness with the aid of upper curvature bounds. We also show that, in compact Riemannian manifolds, the Fr\\'echet medians of generic data points are always unique. Stochastic and deterministic algorithms are proposed for computing Riemannian p-means. The rate of convergence and error estimates of these algorithms are also obtained. Finally, we apply the medians and the Riemannian geometry of Toeplitz covariance matrices to radar target detection.

  19. U(VI) reduction by diverse outer surface c-type cytochromes of Geobacter sulfurreducens.

    Science.gov (United States)

    Orellana, Roberto; Leavitt, Janet J; Comolli, Luis R; Csencsits, Roseann; Janot, Noemie; Flanagan, Kelly A; Gray, Arianna S; Leang, Ching; Izallalen, Mounir; Mester, Tünde; Lovley, Derek R

    2013-10-01

    Early studies with Geobacter sulfurreducens suggested that outer-surface c-type cytochromes might play a role in U(VI) reduction, but it has recently been suggested that there is substantial U(VI) reduction at the surface of the electrically conductive pili known as microbial nanowires. This phenomenon was further investigated. A strain of G. sulfurreducens, known as Aro-5, which produces pili with substantially reduced conductivity reduced U(VI) nearly as well as the wild type, as did a strain in which the gene for PilA, the structural pilin protein, was deleted. In order to reduce rates of U(VI) reduction to levels less than 20% of the wild-type rates, it was necessary to delete the genes for the five most abundant outer surface c-type cytochromes of G. sulfurreducens. X-ray absorption near-edge structure spectroscopy demonstrated that whereas 83% ± 10% of the uranium associated with wild-type cells correspond to U(IV) after 4 h of incubation, with the quintuple mutant, 89% ± 10% of uranium was U(VI). Transmission electron microscopy and X-ray energy dispersion spectroscopy revealed that wild-type cells did not precipitate uranium along pili as previously reported, but U(IV) was precipitated at the outer cell surface. These findings are consistent with those of previous studies, which have suggested that G. sulfurreducens requires outer-surface c-type cytochromes but not pili for the reduction of soluble extracellular electron acceptors.

  20. Some properties of Fr\\'echet medians in Riemannian manifolds

    CERN Document Server

    Yang, Le

    2011-01-01

    The consistency of Fr\\'echet medians is proved for probability measures in proper metric spaces. In the context of Riemannian manifolds, assuming that the probability measure has more than a half mass lying in a convex ball and verifies some concentration conditions, the positions of its Fr\\'echet medians are estimated. It is also shown that, in compact Riemannian manifolds, the Fr\\'echet sample medians of generic data points are always unique.

  1. Atomic-Scale Visualization of Quasiparticle Interference on a Type-II Weyl Semimetal Surface

    Science.gov (United States)

    Zheng, Hao; Bian, Guang; Chang, Guoqing; Lu, Hong; Xu, Su-Yang; Wang, Guangqiang; Chang, Tay-Rong; Zhang, Songtian; Belopolski, Ilya; Alidoust, Nasser; Sanchez, Daniel S.; Song, Fengqi; Jeng, Horng-Tay; Yao, Nan; Bansil, Arun; Jia, Shuang; Lin, Hsin; Hasan, M. Zahid

    2016-12-01

    We combine quasiparticle interference simulation (theory) and atomic resolution scanning tunneling spectromicroscopy (experiment) to visualize the interference patterns on a type-II Weyl semimetal Mox W1 -xTe2 for the first time. Our simulation based on first-principles band topology theoretically reveals the surface electron scattering behavior. We identify the topological Fermi arc states and reveal the scattering properties of the surface states in Mo0.66 W0.34 Te2 . In addition, our result reveals an experimental signature of the topology via the interconnectivity of bulk and surface states, which is essential for understanding the unusual nature of this material.

  2. A numerical simulation of surface wave excitation in a rectangular planar-type plasma source

    Institute of Scientific and Technical Information of China (English)

    Chen Zhao-Quan; Liu Ming-Hai; Lan Chao-Hui; Chen Wei; Tang Liang; Luo Zhi-Qing; Yan Bao-Rong; Lu Jian-Hong; Hu Xi-Wei

    2009-01-01

    The principle of surface wave plasma discharge in a rectangular cavity is introduced simply based on surface plasmon polariton theory.The distribution of surface-wave electric field at the interface of the plasma-dielectric slab is investigated by using the three-dimensional finite-difference time-domain method (3D-FDTD) with different slotantenna structures.And the experimental image of discharge with a novel slot antenna array and the simulation of the electric field with this slot antenna array are both displayed.Combined with the distribution of surface wave excitation and experimental results,the numerical simulation performed by using 3D-FDTD is shown to be a useful tool in the computer-aided antenna design for large area planar-type surface-wave plasma sources.

  3. Interaction of lubricin with type II collagen surfaces: adsorption, friction, and normal forces.

    Science.gov (United States)

    Chang, Debby P; Guilak, Farshid; Jay, Gregory D; Zauscher, Stefan

    2014-02-01

    One of the major constituents of the synovial fluid that is thought to be responsible for chondroprotection and boundary lubrication is the glycoprotein lubricin (PRG4); however, the molecular mechanisms by which lubricin carries out its critical functions still remain largely unknown. We hypothesized that the interaction of lubricin with type II collagen, the main component of the cartilage extracellular matrix, results in enhanced tribological and wear properties. In this study, we examined: (i) the molecular details by which lubricin interacts with type II collagen and how binding is related to boundary lubrication and adhesive interactions; and (ii) whether collagen structure can affect lubricin adsorption and its chondroprotective properties. We found that lubricin adsorbs strongly onto denatured, amorphous, and fibrillar collagen surfaces. Furthermore, we found large repulsive interactions between the collagen surfaces in presence of lubricin, which increased with increasing lubricin concentration. Lubricin attenuated the large friction and also the long-range adhesion between fibrillar collagen surfaces. Interestingly, lubricin adsorbed onto and mediated the frictional response between the denatured and native amorphous collagen surfaces equally and showed no preference on the supramolecular architecture of collagen. However, the coefficient of friction was lowest on fibrillar collagen in the presence of lubricin. We speculate that an important role of lubricin in mediating interactions at the cartilage surface is to attach to the cartilage surface and provide a protective coating that maintains the contacting surfaces in a sterically repulsive state.

  4. Application of Q-type aspheric surface in the design of Wynne-Dyson projection lens

    Science.gov (United States)

    Ho, Cheng-Fang; Peng, Wei-Jei; Hsu, Wei-Yao

    2016-10-01

    ITRC dedicates in high precision optics for more than 40 years and focuses in lithography optics for projection system recently. The first project of the lithography optics in ITRC is an i-line Wynne-Dyson projection lens for 3D-ICs applications. The Wynne-Dyson projection lens is a classical design for unity magnification projection system. We take the advantages of the established benefits of Wynne-Dyson lens and modify it. ITRC`s Wynne-Dyson lens is a 0.16 NA system with unity magnification, which is designed in double telecentricity and long working distance. The projection lens comprises three lenses and one concave mirror. Two aspheric surfaces are deployed in lens 1 and concave mirror. A lens with aspheric surfaces can correct for aberration and deliver a higher performance with fewer lens elements; therefore it has advantages of compact and light. However, aspheres are more difficult to fabricate and higher cost than spherical surface. In order to control the testability and manufacturability of the aspheric surface, the Q-type aspheric surfaces are applied in our design phase and manufacture process. We optimize for both performance and manufacturability by Q-type aspheric surfaces. Not only a testable and manufacturable asphere can be approached but also an additional benefits of less sensitive and cost-effective to manufacture to the required specification. In this paper, the Q-type aspheric surfaces and slope constraint are applied to a Wynne-Dyson projection lens, the testability of Q-type aspheric surfaces by the departure from best-fit-sphere and fringe density of interferometry are estimated. Furthermore, subaperture stitching interferometer system (ASI, from QED technologies) is also applied for testability comparison. The tolerance and sensitivity are also discussed. Finally, the results show a diffraction limit approached lens with testable aspheric surface is designed using Q-type aspheric surface. One of the asphere is 150 m departure from best

  5. Bulk and surface half-metallicity: The case of D03-type Mn3Ge

    Science.gov (United States)

    Liu, Hao; Gao, G. Y.; Hu, Lei; Ni, Yun; Zu, Fengxia; Zhu, Sicong; Wang, Shuling; Yao, K. L.

    2014-01-01

    Motivated by the experimental realization of D022-type Mn3Ge (001) films [Kurt et al. Appl. Phys. Lett. 101, 132410 (2012)] and the structural stability of D03-type Heusler alloy Mn3Ge [Zhang et al. J. Phys.: Condens. Matter 25, 206006 (2013)], we use the first-principles calculations based on the full potential linearized augmented plane-wave method to investigate the electronic and magnetic properties of D03-type Heusler alloy Mn3Ge and its (001) surface. We show that bulk D03-Mn3Ge is a half-metallic ferromagnet with the minority-spin energy gap of 0.52 eV and the magnetic moment of 1.00 μB per formula unit. The bulk half-metallicity is preserved at the pure Mn-terminated (001) surface due to the large exchange split, but the MnGe-terminated (001) surface destroys the bulk half-metallicity. We also reveal that the surface stabilities are comparable between the D03-Mn3Ge (001) and the experimental D022-Mn3Ge (001), which indicates the feasibility to grow the Mn3Ge (001) films with D03 phase other than D022 one. The surface half-metallicity and stability make D03-Mn3Ge a promising candidate for spintronic applications.

  6. Effect of adhesive resin type for bonding to zirconia using two surface pretreatments

    NARCIS (Netherlands)

    Samimi, P.; Hasankhani, A.; Matinlinna, J.P.; Mirmohammadi, H.

    2015-01-01

    Purpose: This laboratory study evaluated the short-term adhesive properties of one 10-MDP-containing and two MDP-free resin composite cements, using two types of zirconia surface pretreatments. Materials and Methods: Eighteen sintered zirconia disks (Procera, Nobel Biocare) were randomly divided int

  7. The turn angle gauge of generating type with an element on surface acoustic waves

    Directory of Open Access Journals (Sweden)

    Lepikh Ya. I.

    2009-06-01

    Full Text Available The results of intellectualized angle of rotation sensor with an element on the surface acoustic waves (SAW development are presented. The generating type sensor block diagram, in which the element on SAW plays a role of the appropriate line of a delay is described. The sensor basic characteristics are given and the area of its application are shown.

  8. Effect of adhesive resin type for bonding to zirconia using two surface pretreatments

    NARCIS (Netherlands)

    Samimi, P.; Hasankhani, A.; Matinlinna, J.P.; Mirmohammadi, H.

    2015-01-01

    Purpose: This laboratory study evaluated the short-term adhesive properties of one 10-MDP-containing and two MDP-free resin composite cements, using two types of zirconia surface pretreatments. Materials and Methods: Eighteen sintered zirconia disks (Procera, Nobel Biocare) were randomly divided

  9. Jerky-type phenomena at nanocomposite surfaces : The breakdown of the coulomb friction law

    NARCIS (Netherlands)

    Hosson, Jeff T.M. De; Pei, Yutao; Chen, Changqiang

    This article concentrates on the jerky-type phenomenon of surfaces in relative motion (i.e., a breakdown of the Coulomb friction law) in nanocomposite materials. Physical arguments are provided to understand the dependence of friction on sliding velocity in the sense of self-lubrication. Also

  10. The influence of surface type on the absorbed radiation by a human under hot, dry conditions

    Science.gov (United States)

    Hardin, A. W.; Vanos, J. K.

    2017-05-01

    Given the predominant use of heat-retaining materials in urban areas, numerous studies have addressed the urban heat island mitigation potential of various "cool" options, such as vegetation and high-albedo surfaces. The influence of altered radiational properties of such surfaces affects not only the air temperature within a microclimate, but more importantly the interactions of long- and short-wave radiation fluxes with the human body. Minimal studies have assessed how cool surfaces affect thermal comfort via changes in absorbed radiation by a human (R abs) using real-world, rather than modeled, urban field data. The purpose of the current study is to assess the changes in the absorbed radiation by a human—a critical component of human energy budget models—based on surface type on hot summer days (air temperatures > 38.5∘C). Field tests were conducted using a high-end microclimate station under predominantly clear sky conditions over ten surfaces with higher sky view factors in Lubbock, Texas. Three methods were used to measure and estimate R abs: a cylindrical radiation thermometer (CRT), a net radiometer, and a theoretical estimation model. Results over dry surfaces suggest that the use of high-albedo surfaces to reduce overall urban heat gain may not improve acute human thermal comfort in clear conditions due to increased reflected radiation. Further, the use of low-cost instrumentation, such as the CRT, shows potential in quantifying radiative heat loads within urban areas at temporal scales of 5-10 min or greater, yet further research is needed. Fine-scale radiative information in urban areas can aid in the decision-making process for urban heat mitigation using non-vegetated urban surfaces, with surface type choice is dependent on the need for short-term thermal comfort, or reducing cumulative heat gain to the urban fabric.

  11. An analysis of type F2 software measurement standards for profile surface texture parameters

    Science.gov (United States)

    Todhunter, L. D.; Leach, R. K.; Lawes, S. D. A.; Blateyron, F.

    2017-06-01

    This paper reports on an in-depth analysis of ISO 5436 part 2 type F2 reference software for the calculation of profile surface texture parameters that has been performed on the input, implementation and output results of the reference software developed by the National Physical Laboratory (NPL), the National Institute of Standards and Technology (NIST) and Physikalisch-Technische Bundesanstalt (PTB). Surface texture parameters have been calculated for a selection of 17 test data files obtained from the type F1 reference data sets on offer from NPL and NIST. The surface texture parameter calculation results show some disagreements between the software methods of the National Metrology Institutes. These disagreements have been investigated further, and some potential explanations are given.

  12. Lateral photovoltaic effect in p-type silicon induced by surface states

    Science.gov (United States)

    Huang, Xu; Mei, Chunlian; Gan, Zhikai; Zhou, Peiqi; Wang, Hui

    2017-03-01

    A colossal lateral photovoltaic effect (LPE) was observed at the surface of p-type silicon, which differs from the conventional thought that a large LPE is only observed in Schottky junctions and PN junctions consisting of several layers with different conductivities. It shows a high sensitivity of 499.24 mV/mm and an ultra-broadband spectral responsivity (from 405 nm to 980 nm) at room temperature, which makes it an attractive candidate for near-infrared detection. We propose that this phenomenon can be understood by considering the surface band bending near the surface of p-Si induced by charged surface states. The energy band diagrams of the samples are shown based on X-ray photoelectron spectroscopy suggesting the correlation between the LPE and surface band bending. The conjectures are validated by changing the surface states of p-type silicon using Ni nano-films. These findings reveal a generation mechanism of the LPE and may lead to p-Si based, broadband-responsivity, low-cost, and high-precision optical and optoelectronic applications.

  13. Adaptive Threshold Median Filter for Multiple-Impulse Noise

    Institute of Scientific and Technical Information of China (English)

    JIANG Bo; HUANG Wei

    2007-01-01

    Attenuating the noises plays an essential role in the image processing. Almost all the traditional median filters concern the removal of impulse noise having a single layer, whose noise gray level value is constant. In this paper, a new adaptive median filter is proposed to handle those images corrupted not only by single layer noise. The adaptive threshold median filter(ATMF) has been developed by combining the adaptive median filter (AMF) and two dynamic thresholds. Because of the dynamic threshold being used, the ATMF is able to balance the removal of the multiple-impulse noise and the quality of image. Comparison of the proposed method with traditional median filters is provided. Some visual examples are given to demonstrate the performance of the proposed Filter.

  14. Head rotation and sound image localization in the median plane

    Institute of Scientific and Technical Information of China (English)

    RAO Dan; XIE Bosun

    2005-01-01

    The effect of head rotation on median plane sound source (or image) localization is studied. It is suggested that, at low frequency, the change of interaural time difference (ITD) caused by head rotation supplies information for determining sound source direction in the median plane. Based on the suggestion, the summed sound image localization equations for multiple loudspeakers arranged in the median plane are derived. Especially, for a pair of loudspeakers arranged front-back symmetrically in the median plane, the localization equations are similar to that of stereophonic sound in horizontal plane. A sound image localization experiment was carried out to prove the theoretical analysis. The results of this paper are not only available to virtual spatial auditory, but also supply a quantitative validation of the hypothesis that head rotation is a cue for sound source localization in the median plane at low frequency.

  15. The Impact of Cloud Type on Surface Radiation and Road Pavement Temperature

    Science.gov (United States)

    Walker, C. L.; Anderson, A.; Chapman, M.; Drobot, S.

    2012-12-01

    Forecast systems provide decision support for end-users ranging from the solar energy industry to municipalities concerned with winter road maintenance. The racing community also relies on racetrack pavement temperature forecast systems because tire friction decreases as temperature increases, affecting vehicle performance. Race crews perform vehicle maintenance (e.g., tire pressure and suspension adjustments) to maximize traction given a forecasted racetrack temperature. Many forecast systems suffer from inaccurate radiation forecasts resulting in part from a lack of information relating radiation to cloud types. This research seeks to improve the forecasts by determining how cloud type impacts the amount of solar radiation reaching the surface. Cloud type information was obtained from the Naval Research Laboratory Cloud Classifier algorithm and radiation data were obtained from a Davis Weather Station. A theoretical maximum solar radiation distribution was calculated. Cloud type-radiation distribution analyses from Salisbury, North Carolina during May-June 2012 indicated that low clouds allowed approximately 20% of the maximum possible radiation to reach the surface, mid level clouds 32%, high clouds 40% and cumuliform types 34%. A categorical regression analysis revealed 33% of the variation in solar radiation on cloudy case days can be explained by cloud type. Inclusion of clear case days with apparent variability lowered this to 7% suggesting another influence on radiation. A similar bulk statistical analysis is in progress on a much larger data set obtained from the Oklahoma Mesonet. This work lays the foundation for use of satellite cloud type information in order to improve the output of forecast systems. Distribution of mean solar radiation measured at the surface for all nine case studies, sorted by cloud type height characteristics, where n represents the sample size.

  16. Median Hetero-Associative Memories Applied to the Categorization of True-Color Patterns

    Science.gov (United States)

    Vázquez, Roberto A.; Sossa, Humberto

    Median associative memories (MED-AMs) are a special type of associative memory based on the median operator. This type of associative model has been applied to the restoration of gray scale images and provides better performance than other models, such as morphological associative memories, when the patterns are altered with mixed noise. Despite of his power, MED-AMs have not been applied in problems involving true-color patterns. In this paper we describe how a median hetero-associative memory (MED-HAM) could be applied in problems that involve true-color patterns. A complete study of the behavior of this associative model in the restoration of true-color images is performed using a benchmark of 14400 images altered by different type of noises. Furthermore, we describe how this model can be applied to an image categorization problem.

  17. Predicting Mean Survival Time from Reported Median Survival Time for Cancer Patients

    DEFF Research Database (Denmark)

    Lousdal, Mette L; Kristiansen, Ivar S; Møller, Bjørn;

    2016-01-01

    BACKGROUND: Mean duration of survival following treatment is a prerequisite for cost-effectiveness analyses used for assessing new and costly life-extending therapies for cancer patients. Mean survival time is rarely reported due to censoring imposed by limited follow-up time, whereas the median...... survival time often is. The empirical relationship between mean and median survival time for cancer patients is not known. AIM: To derive the empirical associations between mean and median survival time across cancer types and to validate this empirical prediction approach and compare it with the standard...... approach of fitting a Weibull distribution. METHODS: We included all patients in Norway diagnosed from 1960 to 1999 with one of the 13 most common solid tumor cancers until emigration, death, or 31 December 2011, whichever came first. Observed median, restricted mean, and mean survival times were obtained...

  18. Differences in excitability between median and superficial radial sensory axons.

    Science.gov (United States)

    Fujimaki, Yumi; Kanai, Kazuaki; Misawa, Sonoko; Shibuya, Kazumoto; Isose, Sagiri; Nasu, Saiko; Sekiguchi, Yukari; Ohmori, Shigeki; Noto, Yu-ichi; Kugio, Yumiko; Shimizu, Toshio; Matsubara, Shiro; Lin, Cindy S Y; Kuwabara, Satoshi

    2012-07-01

    The aim of this study was to investigate differences in excitability properties of human median and superficial radial sensory axons (e.g., axons innervating the glabrous and hairy skin in the hand). Previous studies have shown that excitability properties differ between motor and sensory axons, and even among sensory axons between median and sural sensory axons. In 21 healthy subjects, threshold tracking was used to examine excitability indices such as strength-duration time constant, threshold electrotonus, supernormality, and threshold change at the 0.2 ms inter-stimulus interval in latent addition. In addition, threshold changes induced by ischemia for 10 min were compared between median and superficial radial sensory axons. Compared with radial sensory axons, median axons showed shorter strength-duration time constant, greater threshold changes in threshold electrotonus (fanning-out), greater supernormality, and smaller threshold changes in latent addition. Threshold changes in both during and after ischemia were greater for median axons. These findings suggest that membrane potential in human median sensory axons is more negative than in superficial radial axons, possibly due to greater activity of electrogenic Na(+)/K(+) pump. These results may reflect adaptation to impulses load carried by median axons that would be far greater with a higher frequency. Biophysical properties are not identical in different human sensory axons, and therefore their responses to disease may differ. Copyright © 2011 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

  19. Dual pathology proximal median nerve compression of the forearm.

    LENUS (Irish Health Repository)

    Murphy, Siun M

    2013-12-01

    We report an unusual case of synchronous pathology in the forearm- the coexistence of a large lipoma of the median nerve together with an osteochondroma of the proximal ulna, giving rise to a dual proximal median nerve compression. Proximal median nerve compression neuropathies in the forearm are uncommon compared to the prevalence of distal compression neuropathies (eg Carpal Tunnel Syndrome). Both neural fibrolipomas (Refs. 1,2) and osteochondromas of the proximal ulna (Ref. 3) in isolation are rare but well documented. Unlike that of a distal compression, a proximal compression of the median nerve will often have a definite cause. Neural fibrolipoma, also called fibrolipomatous hamartoma are rare, slow-growing, benign tumours of peripheral nerves, most often occurring in the median nerve of younger patients. To our knowledge, this is the first report of such dual pathology in the same forearm, giving rise to a severe proximal compression of the median nerve. In this case, the nerve was being pushed anteriorly by the osteochondroma, and was being compressed from within by the intraneural lipoma. This unusual case highlights the advantage of preoperative imaging as part of the workup of proximal median nerve compression.

  20. Median age at death as an indicator of premature mortality

    OpenAIRE

    Jannerfeldt, Eric; Hörte, Lars-Gunnar

    1988-01-01

    The median age at death from certain diseases was calculated for each year for 1969-85 and compared with that at death from all causes. The results indicated the impact of these diseases in terms of premature mortality and changes over time. Cancer was a more important cause of premature mortality among women than among men. For cancer of the cervix the median age at death increased appreciably whereas for cancer of the lung in women it slightly decreased. The median age at death is easy to c...

  1. Concurrent Variations of Lateral Pectoral, Median, and Musculocutaneous Nerves

    Directory of Open Access Journals (Sweden)

    Satheesha B Nayak

    2017-01-01

    Full Text Available Brachial plexus frequently presents variations of its cords and branches. We saw concurrent variations of lateral pectoral, median and musculocutaneous nerves. There were two lateral pectoral nerves. Median nerve was formed by the union of 3 roots; two lateral roots and one medial root. Medial root arose from the ulnar nerve. Musculocutaneous nerve did not pierce the coracobrachialis muscle. There was a thick communicating branch between the musculocutaneous and median nerves. Though there are reports on individual variations mentioned above, it is very rare to see all of them in the same individual. Knowledge of these variations may be handy in axillary lymph node clearance and performing nerve blocks

  2. A theoretical analysis of the median LMF adaptive algorithm

    DEFF Research Database (Denmark)

    Bysted, Tommy Kristensen; Rusu, C.

    1999-01-01

    Higher order adaptive algorithms are sensitive to impulse interference. In the case of the LMF (Least Mean Fourth), an easy and effective way to reduce this is to median filter the instantaneous gradient of the LMF algorithm. Although previous published simulations have indicated that this reduces...... the speed of convergence, no analytical studies have yet been made to prove this. In order to enhance the usability, this paper presents a convergence and steady-state analysis of the median LMF adaptive algorithm. As expected this proves that the median LMF has a slower convergence and a lower steady...

  3. Surface detail reproduction of Type IV dental stones with selected polyvinyl siloxane impression materials.

    Science.gov (United States)

    Schelb, E; Cavazos, E; Troendle, K B; Prihoda, T J

    1991-01-01

    Four polyvinyl siloxane impression materials and 14 modified Type IV dental stones were evaluated for their abilities to reproduce surface detail. Each combination of impression material and dental stone was used to duplicate a 20-microns-wide line. Surface detail reproduction was observed by two paired-rater groups. The line was reproduced in all impression material specimens, but in only 32% of the stone cast specimens. Some combinations of impression material/dental stone reproduced the line all or most of the time, but 12 combinations did not reproduce the line at all.

  4. Heterotic-type IIA duality and degenerations of K3 surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Braun, A.P. [Department of Mathematics, University of Oxford,Andrew Wiles Building, Woodstock Rd, Oxford OX2 6GG (United Kingdom); Watari, T. [Kavli Institute for the Physics and Mathematics of the Universe, University of Tokyo,Kashiwano-ha 5-1-5, 277-8583 (Japan)

    2016-08-04

    We study the duality between four-dimensional N=2 compactifications of heterotic and type IIA string theories. Via adiabatic fibration of the duality in six dimensions, type IIA string theory compactified on a K3-fibred Calabi-Yau threefold has a potential heterotic dual compactification. This adiabatic picture fails whenever the K3 fibre degenerates into multiple components over points in the base of the fibration. Guided by monodromy, we identify such degenerate K3 fibres as solitons generalizing the NS5-brane in heterotic string theory. The theory of degenerations of K3 surfaces can then be used to find which solitons can be present on the heterotic side. Similar to small instanton transitions, these solitons escort singular transitions between different Calabi-Yau threefolds. Starting from well-known examples of heterotic-type IIA duality, such transitions can take us to type IIA compactifications with unknown heterotic duals.

  5. High surface hole concentration p-type GaN using Mg implantation

    CERN Document Server

    Long Tao; Zhang Guo Yi

    2001-01-01

    Mg ions were implanted on Mg-doped GaN grown by metalorganic chemical vapor deposition (MOCVD). The p-type GaN was achieved with high hole concentration (8.28 x 10 sup 1 sup 7 cm sup - sup 3) conformed by Van derpauw Hall measurement after annealing at 800 degree C for 1 h. this is the first experimental report of Mg implantation on Mg-doped GaN and achieving p-type GaN with high surface hole concentration

  6. An exact solver for the DCJ median problem.

    Science.gov (United States)

    Zhang, Meng; Arndt, William; Tang, Jijun

    2009-01-01

    The "double-cut-and-join" (DCJ) model of genome rearrangement proposed by Yancopoulos et al. uses the single DCJ operation to account for all genome rearrangement events. Given three signed permutations, the DCJ median problem is to find a fourth permutation that minimizes the sum of the pairwise DCJ distances between it and the three others. In this paper, we present a branch-and-bound method that provides accurate solution to the multichromosomal DCJ median problems. We conduct extensive simulations and the results show that the DCJ median solver performs better than other median solvers for most of the test cases. These experiments also suggest that DCJ model is more suitable for real datasets where both reversals and transpositions occur.

  7. Microfluidic assay for simultaneous culture of multiple cell types on surfaces or within hydrogels

    Science.gov (United States)

    Shin, Yoojin; Han, Sewoon; Jeon, Jessie S.; Yamamoto, Kyoko; Zervantonakis, Ioannis K.; Sudo, Ryo; Kamm, Roger D.; Chung, Seok

    2014-01-01

    This protocol describes a simple but robust microfluidic assay combining three-dimensional (3D) and two-dimensional (2D) cell culture. The microfluidic platform comprises hydrogel incorporating chambers between surface-accessible microchannels. Using this platform, well-defined biochemical and biophysical stimuli can be applied to multiple cell types interacting over distances of experiments can run for up to several weeks. PMID:22678430

  8. The genus distributions for a certain type of permutation graphs in orientable surfaces

    Institute of Scientific and Technical Information of China (English)

    Rong-xia; HAO; Wei-li; HE; Yan-pei; LIU; Er-ling; WEI

    2007-01-01

    A circuit is a connected nontrivial 2-regular graph. A graph G is a permutation graph over a circuit C, if G can be obtained from two copies of C by joining these two copies with a perfect matching. In this paper, based on the joint tree method introduced by Liu, the genus polynomials for a certain type of permutation graphs in orientable surfaces are given.

  9. REGRESI KUANTIL MEDIAN UNTUK MENGATASI HETEROSKEDASTISITAS PADA ANALISIS REGRESI

    Directory of Open Access Journals (Sweden)

    IDA AYU PRASETYA UTHAMI

    2013-01-01

    Full Text Available In regression analysis, the method used to estimate the parameters is Ordinary Least Squares (OLS. The principle of OLS is to minimize the sum of squares error. If any of the assumptions were not met, the results of the OLS estimates are no longer best, linear, and unbiased estimator (BLUE. One of the assumptions that must be met is the assumption about homoscedasticity, a condition in which the variance of the error is constant (same. Violation of the assumptions about homoscedasticity is referred to heteroscedasticity. When there exists heteroscedas­ticity, other regression techniques are needed, such as median quantile regression which is done by defining the median as a solution to minimize sum of absolute error. This study intended to estimate the regression parameters of the data were known to have heteroscedasticity. The secondary data were taken from the book Basic Econometrics (Gujarati, 2004 and analyzing method were performed by EViews 6. Parameter estimation of the median quantile regression were done by estimating the regression parameters at each quantile ?th, then an estimator was chosen on the median quantile as regression coefficients estimator. The result showed heteroscedasticity problem has been solved with median quantile regression although error still does not follow normal distribution properties with a value of R2 about 71 percent. Therefore it can be concluded that median quantile regression can overcome heteroscedasticity but the data still abnormalities.

  10. REGRESI KUANTIL MEDIAN UNTUK MENGATASI HETEROSKEDASTISITAS PADA ANALISIS REGRESI

    Directory of Open Access Journals (Sweden)

    IDA AYU PRASETYA UTHAMI

    2013-03-01

    Full Text Available In regression analysis, the method used to estimate the parameters is Ordinary Least Squares (OLS. The principle of OLS is to minimize the sum of squares error. If any of the assumptions were not met, the results of the OLS estimates are no longer best, linear, and unbiased estimator (BLUE. One of the assumptions that must be met is the assumption about homoscedasticity, a condition in which the variance of the error is constant (same. Violation of the assumptions about homoscedasticity is referred to heteroscedasticity. When there exists heteroscedas­ticity, other regression techniques are needed, such as median quantile regression which is done by defining the median as a solution to minimize sum of absolute error. This study intended to estimate the regression parameters of the data were known to have heteroscedasticity. The secondary data were taken from the book Basic Econometrics (Gujarati, 2004 and analyzing method were performed by EViews 6. Parameter estimation of the median quantile regression were done by estimating the regression parameters at each quantile ?th, then an estimator was chosen on the median quantile as regression coefficients estimator. The result showed heteroscedasticity problem has been solved with median quantile regression although error still does not follow normal distribution properties with a value of R2 about 71 percent. Therefore it can be concluded that median quantile regression can overcome heteroscedasticity but the data still abnormalities.

  11. Testing the gravity p-median model empirically

    Directory of Open Access Journals (Sweden)

    Kenneth Carling

    2015-12-01

    Full Text Available Regarding the location of a facility, the presumption in the widely used p-median model is that the customer opts for the shortest route to the nearest facility. However, this assumption is problematic on free markets since the customer is presumed to gravitate to a facility by the distance to and the attractiveness of it. The recently introduced gravity p-median model offers an extension to the p-median model that account for this. The model is therefore potentially interesting, although it has not yet been implemented and tested empirically. In this paper, we have implemented the model in an empirical problem of locating vehicle inspections, locksmiths, and retail stores of vehicle spare-parts for the purpose of investigating its superiority to the p-median model. We found, however, the gravity p-median model to be of limited use for the problem of locating facilities as it either gives solutions similar to the p-median model, or it gives unstable solutions due to a non-concave objective function.

  12. New Hybrid Properties of TiO2 Nanoparticles Surface Modified With Catecholate Type Ligands

    Science.gov (United States)

    Janković, Ivana A.; Šaponjić, Zoran V.; Džunuzović, Enis S.; Nedeljković, Jovan M.

    2010-01-01

    Surface modification of nanocrystalline TiO2 particles (45 Å) with bidentate benzene derivatives (catechol, pyrogallol, and gallic acid) was found to alter optical properties of nanoparticles. The formation of the inner-sphere charge-transfer complexes results in a red shift of the semiconductor absorption compared to unmodified nanocrystallites. The binding structures were investigated by using FTIR spectroscopy. The investigated ligands have the optimal geometry for chelating surface Ti atoms, resulting in ring coordination complexes (catecholate type of binuclear bidentate binding-bridging) thus restoring in six-coordinated octahedral geometry of surface Ti atoms. From the Benesi-Hildebrand plot, the stability constants at pH 2 of the order 103 M-1 have been determined.

  13. Reflectance anisotropy for characterising fine-scale changes in soil surface condition across different soil types

    Science.gov (United States)

    Croft, Holly; Anderson, Karen; Kuhn, Nikolaus J.

    2010-05-01

    Soils can experience rapid structural degradation in response to land cover changes, resulting in a reduction in soil productivity, an increased susceptibility to erosion and increased release of greenhouse gases. Soil surface roughness at the centimetre scale plays a fundamental role in affecting soil erosion and surface runoff pathways. A decline in surface roughness can also be used to infer soil degradation as soil aggregates are broken down through raindrop impact. However, due to the time and resources involved in using traditional field sampling techniques, there is a lack of spatially-distributed information on soil surface condition. Remotely sensed data can provide a cost-effective means of monitoring changes in soil surface condition over broad spatial extents. Furthermore, a growing recognition into the importance of the directional reflectance domain has led to an increasing number of satellites with multiple view angle (MVA) capabilities (e.g. MISR, CHRIS on Proba). This is potentially useful for monitoring soil degradation and susceptibility to erosion because changes in soil surface roughness, associated with the breakdown of macro-aggregates, have a measurable effect on directional reflectance factors. Consequently, field and laboratory data are required for an empirical understanding of soil directional reflectance characteristics, underpinning subsequent model development. This study assessed the extent to which a hyperspectral MVA approach (350-2500 nm) could detect fine-scale changes in soil crusting states across five different soil types. A series of soil crusting states were produced for all five soil types, using an artificial rainfall simulator. The controlled conditions allowed the production of a series of stages in the soil crusting process; showing progressively declining surface roughness values. Each soil state was then spatially characterised, using a laboratory laser device at 2 mm sample spacing, over a 10 x 10 cm area. Laser data

  14. Col-OSSOS: z-Band Photometry Reveals Three Distinct TNO Surface Types

    Science.gov (United States)

    Pike, Rosemary E.; Fraser, Wesley C.; Schwamb, Megan E.; Kavelaars, J. J.; Marsset, Michael; Bannister, Michele T.; Lehner, Matthew J.; Wang, Shiang-Yu; Alexandersen, Mike; Chen, Ying-Tung; Gladman, Brett J.; Gwyn, Stephen; Petit, Jean-Marc; Volk, Kathryn

    2017-09-01

    Several different classes of trans-Neptunian objects (TNOs) have been identified based on their optical and near-infrared colors. As part of the Colours of the Outer Solar System Origins Survey (Col-OSSOS), we have obtained g-, r-, and z-band photometry of 26 TNOs using Subaru and Gemini Observatories. Previous color surveys have not utilized z-band reflectance, and the inclusion of this band reveals significant surface reflectance variations between sub-populations. The colors of TNOs in g - r and r - z show obvious structure, and appear consistent with the previously measured bi-modality in g - r. The distribution of colors of the two dynamically excited surface types can be modeled using the two-component mixing models from Fraser & Brown. With the combination of g - r and r - z, the dynamically excited classes can be separated cleanly into red and neutral surface classes. In g - r and r - z, the two dynamically excited surface groups are also clearly distinct from the cold classical TNO surfaces, which are red, with g-r≳ 0.85 and r - z ≲ 0.6, while all dynamically excited objects with similar g - r colors exhibit redder r - z colors. The z-band photometry makes it possible for the first time to differentiate the red excited TNO surfaces from the red cold classical TNO surfaces. The discovery of different r - z colors for these cold classical TNOs makes it possible to search for cold classical surfaces in other regions of the Kuiper Belt and to completely separate cold classical TNOs from the dynamically excited population, which overlaps in orbital parameter space.

  15. Effect of surface BRDF of various land cover types on geostationary observations of tropospheric NO2

    Science.gov (United States)

    Noguchi, K.; Richter, A.; Rozanov, V.; Rozanov, A.; Burrows, J. P.; Irie, H.; Kita, K.

    2014-10-01

    We investigated the effect of surface reflectance anisotropy, bidirectional reflectance distribution function (BRDF), on satellite retrievals of tropospheric NO2. We assume the geometry of geostationary measurements over Tokyo, which is one of the worst air-polluted regions in East Asia. We calculated air mass factors (AMF) and box AMFs (BAMF) for tropospheric NO2 to evaluate the effect of BRDF by using the radiative transfer model SCIATRAN. To model the BRDF effect, we utilized the Moderate Resolution Imaging Spectroradiometer (MODIS) products (MOD43B1 and MOD43B2), which provide three coefficients to express the RossThick-LiSparse reciprocal model, a semi-empirical and kernel-based model of BRDF. Because BRDF depends on the land cover type, we also utilized the High Resolution Land-Use and Land-Cover Map of the Advanced Land Observing Satellite (ALOS)/Advanced Visible and Near Infrared Radiometer type 2 (AVNIR-2), which classifies the ground pixels over Tokyo into six main types: water, urban, paddy, crop, deciduous forest, and evergreen forest. We first develop an empirical model of the three BRDF coefficients for each land cover type over Tokyo and then apply the model to the calculation of land-cover-type-dependent AMFs and BAMFs. Results show that the variability of AMF among the land types is up to several tens of percent, and if we neglect the reflectance anisotropy, the difference with AMFs based on BRDF reaches 10% or more. The evaluation of the BAMFs calculated shows that not considering BRDF will cause large errors if the concentration of NO2 is high close to the surface, although the importance of BRDF for AMFs decreases for large aerosol optical depth (AOD).

  16. Campylobacter fetus surface layer proteins are transported by a type I secretion system.

    Science.gov (United States)

    Thompson, S A; Shedd, O L; Ray, K C; Beins, M H; Jorgensen, J P; Blaser, M J

    1998-12-01

    The virulence of Campylobacter fetus, a bacterial pathogen of ungulates and humans, is mediated in part by the presence of a paracrystalline surface layer (S-layer) that confers serum resistance. The subunits of the S-layer are S-layer proteins (SLPs) that are secreted in the absence of an N-terminal signal sequence and attach to either type A or B C. fetus lipopolysaccharide in a serospecific manner. Antigenic variation of multiple SLPs (encoded by sapA homologs) of type A strain 23D occurs by inversion of a promoter-containing DNA element flanked by two sapA homologs. Cloning and sequencing of the entire 6.2-kb invertible region from C. fetus 23D revealed a probable 5.6-kb operon of four overlapping genes (sapCDEF, with sizes of 1,035, 1,752, 1,284, and 1,302 bp, respectively) transcribed in the opposite direction from sapA. The four genes also were present in the invertible region of type B strain 84-107 and were virtually identical to their counterparts in the type A strain. Although SapC had no database homologies, SapD, SapE, and SapF had predicted amino acid homologies with type I protein secretion systems (typified by Escherichia coli HlyBD/TolC or Erwinia chrysanthemi PrtDEF) that utilize C-terminal secretion signals to mediate the secretion of hemolysins, leukotoxins, or proteases from other bacterial species. Analysis of the C termini of four C. fetus SLPs revealed conserved structures that are potential secretion signals. A C. fetus sapD mutant neither produced nor secreted SLPs. E. coli expressing C. fetus sapA and sapCDEF secreted SapA, indicating that the sapCDEF genes are sufficient for SLP secretion. C. fetus SLPs therefore are transported to the cell surface by a type I secretion system.

  17. Chemistry of the interaction between azole type corrosion inhibitor molecules and metal surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Kovacevic, Natasa [Department of Physical and Organic Chemistry, Jozef Stefan Institute, Jamova 39, SI-1000 Ljubljana (Slovenia); Kokalj, Anton, E-mail: tone.kokalj@ijs.si [Department of Physical and Organic Chemistry, Jozef Stefan Institute, Jamova 39, SI-1000 Ljubljana (Slovenia)

    2012-11-15

    By means of density functional theory calculations, it has been shown how typical organic corrosion inhibitors-molecules that have the ability to remarkably slow down the corrosion of metals and alloys-interact with bare surfaces of various types of metals. As representative model systems, benzimidazole and benzotriazole inhibitors on iron, copper, and aluminum surfaces are considered. It is found that bonding depends sensitively on the type of metal. On transition metals with open d-band the inhibitor molecules can chemisorb strongly either parallel to the surface with a pronounced {pi}-d hybridization or perpendicularly with unsaturated N atom(s) through {sigma}-molecular orbitals, whereas on transition metals with fully occupied d-band and on sp-metals the molecules weakly chemisorb only with the latter mode. In addition to neutral inhibitor molecules also inhibitors in deprotonated (anionic) and protonated (cationic) forms are considered, because many corrosion inhibitors possess acidic hydrogens as well as basic heteroatoms. It is shown that the chemisorptive bonding is far the strongest for deprotonated inhibitors and, moreover, that even protonated inhibitors may chemisorb, although such bonding is characteristic of more reactive metals. However adsorbed protonated inhibitors are likely to deprotonate on all considered metals, whereas further deprotonation from neutral to deprotonated form is more likely on more reactive metals. Highlights: Black-Right-Pointing-Pointer Bonding of azole corrosion inhibitors onto metal surfaces characterized by DFT calculations. Black-Right-Pointing-Pointer Adsorption bonding depends sensitively on the type of metal. Black-Right-Pointing-Pointer Azoles bond with either {pi}-system or {sigma}-orbitals to transition metals with open d-band. Black-Right-Pointing-Pointer Azoles bond with {sigma}-orbitals to transition metals with fully occupied d-band and to sp-metals. Black-Right-Pointing-Pointer Among various molecular forms

  18. A connectionist-geostatistical approach for classification of deformation types in ice surfaces

    Science.gov (United States)

    Goetz-Weiss, L. R.; Herzfeld, U. C.; Hale, R. G.; Hunke, E. C.; Bobeck, J.

    2014-12-01

    Deformation is a class of highly non-linear geophysical processes from which one can infer other geophysical variables in a dynamical system. For example, in an ice-dynamic model, deformation is related to velocity, basal sliding, surface elevation changes, and the stress field at the surface as well as internal to a glacier. While many of these variables cannot be observed, deformation state can be an observable variable, because deformation in glaciers (once a viscosity threshold is exceeded) manifests itself in crevasses.Given the amount of information that can be inferred from observing surface deformation, an automated method for classifying surface imagery becomes increasingly desirable. In this paper a Neural Network is used to recognize classes of crevasse types over the Bering Bagley Glacier System (BBGS) during a surge (2011-2013-?). A surge is a spatially and temporally highly variable and rapid acceleration of the glacier. Therefore, many different crevasse types occur in a short time frame and in close proximity, and these crevasse fields hold information on the geophysical processes of the surge.The connectionist-geostatistical approach uses directional experimental (discrete) variograms to parameterize images into a form that the Neural Network can recognize. Recognizing that each surge wave results in different crevasse types and that environmental conditions affect the appearance in imagery, we have developed a semi-automated pre-training software to adapt the Neural Net to chaining conditions.The method is applied to airborne and satellite imagery to classify surge crevasses from the BBGS surge. This method works well for classifying spatially repetitive images such as the crevasses over Bering Glacier. We expand the network for less repetitive images in order to analyze imagery collected over the Arctic sea ice, to assess the percentage of deformed ice for model calibration.

  19. ON THE GAUSS MAP OF RULED SURFACES OF TYPE II IN 3-DIMENSIONAL PSEUDO-GALILEAN SPACE

    Directory of Open Access Journals (Sweden)

    Alper Osman Öğrenmis

    2013-02-01

    Full Text Available In this paper, ruled surfaces of type II in a three-dimensional Pseudo-Galilean space are given. By studying its Gauss map and Laplacian operator, we obtain a classification of ruled surfaces of type II in a three-dimensional Pseudo-Galilean space.

  20. Contact angle hysteresis and meniscus corrugation on randomly heterogeneous surfaces with mesa-type defects.

    Science.gov (United States)

    Iliev, Dimitar; Pesheva, Nina; Iliev, Stanimir

    2013-05-14

    The results of a numerical study of the various characteristics of the static contact of a liquid meniscus with a flat but heterogeneous surface, consisting of two types of homogeneous materials, forming regularly and randomly distributed microscopic defects are presented. The solutions for the meniscus shape are obtained numerically using the full expression of the system free energy functional. The goal is to establish how the magnitude and the limits of the hysteresis interval of the equilibrium contact angle, the Cassie's angle, and the contact line (CL) roughness exponent are related to the parameters, characterizing the heterogeneous surface-the equilibrium contact angles on the two materials and their fractions. We compare the results of different ways of determining the averaged contact angle on heterogeneous surfaces. We study the spread of the CL corrugation along the liquid meniscus. We compare our results with the numerical results, obtained using linearized energy functional, and also with experimental results for the CL roughness exponent. The obtained results support the conclusion that some characteristics depends on the type (regular or random) of the heterogeneity pattern.

  1. Finite element analysis on influence of implant surface treatments, connection and bone types.

    Science.gov (United States)

    Santiago Junior, Joel Ferreira; Verri, Fellippo Ramos; Almeida, Daniel Augusto de Faria; de Souza Batista, Victor Eduardo; Lemos, Cleidiel Aparecido Araujo; Pellizzer, Eduardo Piza

    2016-06-01

    The aim of this study is to assess the effect of different dental implant designs, bone type, loading, and surface treatment on the stress distribution around the implant by using the 3D finite-element method. Twelve 3D models were developed with Invesalius 3.0, Rhinoceros 4.0, and Solidworks 2010 software. The analysis was processed using the FEMAP 10.2 and NeiNastran 10.0 software. The applied oblique forces were 200 N and 100 N. The results were analyzed using maps of maximum principal stress and bone microstrain. Statistical analysis was performed using ANOVA and Tukey's test. The results showed that the Morse taper design was most efficient in terms of its distribution of stresses (p0.05). The different bone types did not show a significant difference in the stress/strain distribution (p>0.05). The surface treatment increased areas of stress concentration under axial loading (p<0.05) and increased areas of microstrain under axial and oblique loading (p<0.05) on the cortical bone. The Morse taper design behaved better biomechanically in relation to the bone tissue. The treated surface increased areas of stress and strain on the cortical bone tissue.

  2. Sensoric Protection after Median Nerve Injury: Babysitter-Procedure Prevents Muscular Atrophy and Improves Neuronal Recovery

    Directory of Open Access Journals (Sweden)

    Benedicta E. Beck-Broichsitter

    2014-01-01

    Full Text Available The babysitter-procedure might offer an alternative when nerve reconstruction is delayed in order to overcome muscular atrophy due to denervation. In this study we aimed to show that a sensomotoric babysitter-procedure after median nerve injury is capable of preserving irreversible muscular atrophy. The median nerve of 20 female Wistar rats was denervated. 10 animals received a sensory protection with the N. cutaneous brachii. After six weeks the median nerve was reconstructed by autologous nerve grafting from the contralateral median nerve in the babysitter and the control groups. Grasping tests measured functional recovery over 15 weeks. At the end of the observation period the weight of the flexor digitorum sublimis muscle was determined. The median nerve was excised for histological examinations. Muscle weight (P<0.0001 was significantly superior in the babysitter group compared to the control group at the end of the study. The histological evaluation revealed a significantly higher diameter of axons (P=0.0194, nerve fiber (P=0.0409, and nerve surface (P=0.0184 in the babysitter group. We conclude that sensory protection of a motor nerve is capable of preserving muscule weight and we may presume that metabolism of the sensory nerve was sufficient to keep the target muscle’s weight and vitality.

  3. 关于一类Bush型分形曲面的维数分析%DIMENSION ANALYSIS ON A CLASS OF BUSH TYPE FRACTAL SURFACES

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In this paper,the authors construct a class of fractal surfaces,Bush type surfaces,based on the Bush type functions.The Box dimension,Packing dimension and Hausdorff dimension of such surfaces are investigated.

  4. Effect of laser surface melting in tensile properties of type 304L stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Akgun, O.V.; Inal, O.T. (New Mexico Inst. of Mining and Technology, Materials and Metallurgical Engineering Dept., Socorro, NM (US)); Lovato, M.L.; Jervist, T.R. (Los Alamos National Lab., Los Alamos, NM (US))

    1992-07-15

    In previous study the authors showed laser surface melting (LSM) to increase yield strength of 304 austenitic stainless steels. A consistent increase approximately 10% was also observed in the hardness of the melted layer compared to that of the substrate. Austentic stainless steels do not transform to martensite during laser processing. The microstructure is observed to contain only austenite and some retained {delta}-ferrite due to rapid cooling. Therefore, the hardness increase observed was interpreted to be due to microstructural modifications, namely in the formation of austenite {delta}-ferrite duplex structure as well as a refinement in the subgrain structure. The alloy used in this study, type 304L, is a lower carbon modification of type 304 for welding applications. Lower carbon content minimizes carbide precipitation in the heat affected zone of welds. In an annealed condition type 304L has lower mechanical properties than type 304. This paper reports on this present study which was undertaken to verify if a material that possesses an initially high yield strength, type 304L, would exhibit a similar increase in its yield strength and the magnitude of this enhancement at different test temperatures (22, 100, 200 and 300{degrees}C).

  5. Study on Transmission Torque Characteristics of a Surface-Permanent-Magnet-Type Magnetic Gear

    Science.gov (United States)

    Niguchi, Noboru; Hirata, Katsuhiro; Hayakawa, Yuichi

    Magnetic gears have some advantages such as low mechanical loss and maintenance-free operation that are not observed in conventional mechanical gears. In addition, magnetic gears have inherent overload protection. Therefore, magnetic gears are expected to be used in special applications; for example, they can be used in a joint of a humanoid robot. Recently, various types of new magnetic gears have been proposed. Among these new gears, a surface-permanent-magnet-type (SPM-type) magnetic gear employing harmonic magnetic flux has gained attention because of its high transmission torque density, though it has a complex structure with multipole magnets. Some studies on an SPM-type magnetic gear have been carried out, but there are few papers on cogging torque. This paper describes the transmission torque characteristics of an SPM-type magnetic gear. The operating principle and the transmission torque under synchronous operation are formulated in accordance with the gear ratio. High orders of the cogging torque are computed by employing the 3-D finite element method, and the validity of the analysis is verified by carrying out measurements on a prototype. Furthermore, a method for reducing the cogging torque is discussed.

  6. Impact of surface type, wheelchair weight, and axle position on wheelchair propulsion by novice older adults.

    Science.gov (United States)

    Cowan, Rachel E; Nash, Mark S; Collinger, Jennifer L; Koontz, Alicia M; Boninger, Michael L

    2009-07-01

    To examine the impact of surface type, wheelchair weight, and rear axle position on older adult propulsion biomechanics. Crossover trial. Biomechanics laboratory. Convenience sample of 53 ambulatory older adults with minimal wheelchair experience (65-87y); men, n=20; women, n=33. Participants propelled 4 different wheelchair configurations over 4 surfaces: tile, low carpet, high carpet, and an 8% grade ramp (surface, chair order randomized). Chair configurations included (1) unweighted chair with an anterior axle position, (2) 9.05 kg weighted chair with an anterior axle position, (3) unweighted chair with a posterior axle position (Delta0.08 m), and (4) 9.05 kg weighted chair with a posterior axle position (Delta0.08 m). Weight was added to a titanium folding chair, simulating the weight difference between very light and depot wheelchairs. Instrumented wheels measured propulsion kinetics. Average self-selected velocity, push frequency, stroke length, peak resultant and tangential force. Velocity decreased as surface rolling resistance or chair weight increased. Peak resultant and tangential forces increased as chair weight increased, as surface resistance increased, and with a posterior axle position. The effect of a posterior axle position was greater on high carpet and the ramp. The effect of weight was constant, but was more easily observed on high carpet and ramp. The effects of axle position and weight were independent of one another. Increased surface resistance decreases self-selected velocity and increases peak forces. Increased weight decreases self-selected velocity and increases forces. Anterior axle positions decrease forces, more so on high carpet. The effects of weight and axle position are independent. The greatest reductions in peak forces occur in lighter chairs with anterior axle positions.

  7. Cytotoxicity Induced by Engineered Silver Nanocrystallites is Dependent on Surface Coatings and Cell Types

    Energy Technology Data Exchange (ETDEWEB)

    Suresh, Anil K [ORNL; Pelletier, Dale A [ORNL; Wang, Wei [ORNL; Morrell-Falvey, Jennifer L [ORNL; Doktycz, Mitchel John [ORNL

    2012-01-01

    Due to their unique antimicrobial properties silver nanocrystallites have garnered substantial recognition and are used extensively in biomedical applications such as wound dressing, surgical instruments and as bone substitute material. They are also released into unintended locations such as the environment or biosphere. Therefore it is imperative to understand the potential interactions, fate and transport of nanoparticles with environmental biotic systems. Although numerous factors including the composition, size, shape, surface charge and capping molecule of nanoparticles are known to influence the cell cytotoxicity, our results demonstrate for the first time that surface coatings are a major determinant in eliciting the potential cytotoxicity and cell interactions of silver nanoparticles. In the present investigation, silver nanocrystallites with nearly uniform size and shape distribution but with different surface coatings, imparting overall high negativity to high positivity, were synthesized. These nanoparticles were poly (diallyldimethylammonium) chloride-Ag, biogenic-Ag, colloidal-Ag (uncoated) and oleate-Ag with zeta potentials +45 5 mV, -12 2 mV, -42 5 mV and -45 5 mV respectively; the particles were thoroughly purified so as to avoid false cytotoxicity interpretations. A systematic investigation on the cytotoxic effects, cellular response and membrane damage caused by these four different silver nanoparticles were evaluated using multiple toxicity measurements on mouse macrophage (RAW-264.7) and lung epithelial (C-10) cell lines. From a toxicity perspective, our results clearly indicated that the cytotoxicity was depend on various factors such as synthesis procedure, surface coat or surface charge and the cell-type for the different silver nanoparticles that were investigated. Poly (diallyldimethylammonium) chloride -Ag was found to be the most toxic, followed by biogenic-Ag and oleate-Ag, whereas uncoated-Ag was found to be least toxic to both

  8. Evaluation of Haney-Type Surface Thermal Boundary Conditions Using a Coupled Atmosphere and Ocean Model

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A coupled atmosphere-ocean model developed at the Institute for Space Studies at NASA Goddard Space Flight Center (Russell et al., 1995) was used to verify the validity of Haney-type surface thermal boundary condition, which linearly connects net downward surface heat flux Q to air / sea temperature difference △T by a relaxation coefficient k. The model was initiated from the National Centers for Environmental Prediction (NCEP) atmospheric observations for 1 December 1977, and from the National Ocean Data Center (NODC) global climatological mean December temperature and salinity fields at 1° ×1° resolution. The time step is 7.5 minutes. We integrated the model for 450 days and obtained a complete model-generated global data set of daily mean downward net surface flux Q, surface air temperature TA,and sea surface temperature To. Then, we calculated the cross-correlation coefficients (CCC) between Q and △T. The ensemble mean CCC fields show (a) no correlation between Q and △T in the equatorial regions, and (b) evident correlation (CCC≥ 0.7) between Q and △T in the middle and high latitudes.Additionally, we did the variance analysis and found that when k= 120 W m-2K-1, the two standard deviations, σrq and σk△T, are quite close in the middle and high latitudes. These results agree quite well with a previous research (Chu et al., 1998) on analyzing the NCEP re-analyzed surface data, except that a smaller value of k (80 W m-2K-1) was found in the previous study.

  9. Landscaping of highway medians and roadway safety at unsignalized intersections.

    Science.gov (United States)

    Chen, Hongyun; Fabregas, Aldo; Lin, Pei-Sung

    2016-05-01

    Well-planted and maintained landscaping can help reduce driving stress, provide better visual quality, and decrease over speeding, thus improving roadway safety. Florida Department of Transportation (FDOT) Standard Index (SI-546) is one of the more demanding standards in the U.S. for landscaping design criteria at highway medians near intersections. The purposes of this study were to (1) empirically evaluate the safety results of SI-546 at unsignalized intersections and (2) quantify the impacts of geometrics, traffic, and landscaping design features on total crashes and injury plus fatal crashes. The studied unsignalized intersections were divided into (1) those without median trees near intersections, (2) those with median trees near intersections that were compliant with SI-546, and (3) those with median trees near intersections that were non-compliant with SI-546. A total of 72 intersections were selected, for which five-year crash data from 2006-2010 were collected. The sites that were compliant with SI-546 showed the best safety performance in terms of the lowest crash counts and crash rates. Four crash predictive models-two for total crashes and two for injury crashes-were developed. The results indicated that improperly planted and maintained median trees near highway intersections can increase the total number of crashes and injury plus fatal crashes at a 90% confidence level; no significant difference could be found in crash rates between sites that were compliant with SI-546 and sites without trees. All other conditions remaining the same, an intersection with trees that was not compliant with SI-546 had 63% more crashes and almost doubled injury plus fatal crashes than those at intersections without trees. The study indicates that appropriate landscaping in highway medians near intersections can be an engineering technology that not only improves roadway environmental quality but also maintains intersection safety.

  10. Somesoppa : sosiaalisen median kehittämissuunnitelma ravintola Rustikille

    OpenAIRE

    Hartikainen, Lotta

    2016-01-01

    Tämän opinnäytetyön tarkoituksena oli tehdä Ravintola Rustikille sosiaalisen median kehittämissuunnitelma. Kehittämissuunnitelmaa varten ideoita ja kehittämiskohtia kerättiin kolmen eri keinon avulla. Ensimmäiseksi tehtiin vertaileva kirjoituspöytätutkimus neljän muun ravintolan toiminnasta sosiaalisessa mediassa ja etsittiin muiden toiminnasta vinkkejä Rustikia varten. Seuraavaksi tehtiin kartoitus Rustikin toiminnasta sosiaalisessa mediassa. Rustikin käyttämät sosiaalisen median alustat ova...

  11. FASCICULAR NEURORRHAPHY FOR NEUROMA IN CONTINUITY OF MEDIAN NERVE

    Directory of Open Access Journals (Sweden)

    Manikumar

    2015-10-01

    Full Text Available It is not common for an orthopaedic surgeon to anastomose or repair a peripheral nerve lesion. Fascicular neurorrhaphy has variable out come with median nerve repairs. The recovery by neuropathy as evidenced by NCVS does not correlate with the clinical out come. We treated a post traumatic median nerve neuroma in continuity of right hand proximal to wrist with sensory hyperaesthesisa. It was treated with excision of neuroma internal neurolysis and fascicular neurorrhaphy along with, carpal tunnel release whi ch gave him good relief from pain in the immediate post - operative period.

  12. The Median Solution of the Newsvendor Problem and Some Observations

    Directory of Open Access Journals (Sweden)

    Sinha Pritibhushan

    2015-09-01

    Full Text Available We consider the median solution of the Newsvendor Problem. Some properties of such a solution are shown through a theoretical analysis and a numerical experiment. Sometimes, though not often, median solution may be better than solutions maximizing expected profit, or maximizing minimum possible, over distribution with the same average and standard deviation, expected profit, according to some criteria. We discuss the practical suitability of the objective function set and the solution derived, for the Newsvendor Problem, and other such random optimization problems.

  13. Effects of Spatial Dispersion on Reflection from Mushroom-type Artificial Impedance Surfaces

    CERN Document Server

    Luukkonen, Olli; Yakovlev, Alexander B; Simovski, Constantin R; Nefedov, Igor S; Tretyakov, Sergei A

    2008-01-01

    Several recent works have emphasized the role of spatial dispersion in wire media, and demonstrated that arrays of parallel metallic wires may behave very differently from a uniaxial local material with negative permittivity. Here, we investigate using local and non-local homogenization methods the effect of spatial dispersion on reflection from the mushroom structure introduced by Sievenpiper. The objective of the paper is to clarify the role of spatial dispersion in the mushroom structure and demonstrate that under some conditions it is suppressed. The metamaterial substrate, or metasurface, is modeled as a wire medium covered with an impedance surface. Surprisingly, it is found that in such configuration the effects of spatial dispersion may be nearly suppressed when the slab is electrically thin, and that the wire medium can be modeled very accurately using a local model. This result paves the way for the design of artificial surfaces that exploit the plasmonic-type response of the wire medium slab.

  14. AN AMELIORATED DETECTION STATISTICS FOR ADAPTIVE MASK MEDIAN FILTRATION OF HEAVILY NOISED DIGITAL IMAGES

    Directory of Open Access Journals (Sweden)

    Geeta Hanji

    2016-11-01

    Full Text Available Noise reduction is an important area of research in image processing applications. The performance of the digital image noise filtering method primarily depends upon the accuracy of noise detection scheme. This paper presents an effective detector based, adaptive mask, median filtration of heavily noised digital images affected with fixed value (or salt and pepper impulse noise. The proposed filter presents a novel approach; an ameliorated Rank Ordered Absolute Deviation (ROAD statistics to judge whether the input pixel is noised or noise free. If a pixel is detected as corrupted, it is subjected to adaptive mask median filtration; otherwise, it is kept unchanged. Extensive experimental results and comparative performance evaluations demonstrate that the proposed filter outperforms the existing decision type, median based filters with powerful noise detectors in terms of objective performance measures and visual retrieviation accuracy.

  15. Evaluation of the Various Drying Methods on Surface Hardness of Type IV Dental Stone

    Science.gov (United States)

    Sudhakar, A; Srivatsa, G; Shetty, Rohit; Rajeswari, C L; Manvi, Supriya

    2015-01-01

    Background: Studies regarding the effect of various methods to increase the surface hardness of Type IV dental stone are not conclusive. Therefore, this study was carried out to evaluate the effect of air drying, micro oven drying and die hardener on surface hardness of Type IV dental stone. Materials and Methods: A standard metal die was fabricated; polyvinyl siloxane impression material was used to make the molds of metal die. A total of 120 specimens were obtained from two different die stones and were grouped as Group A (kalrock) and Group B (pearl stone), and were subjected to air drying for 24 h, micro oven drying and application of die hardener. These models were then subjected to surface hardness testing using the knoop hardness instrument. The obtained data were subjected to statistical analysis. Results: The hardness of Group A specimens was 64 ± 0.54 Knoop hardness number (KHN) after application of die hardener, 60.47 ± 0.41 KHN after 24 h air drying, 58.2 ± 0.88 after microwave oven drying and 24.6 ± 0.4 after 1 h air drying. The hardness of Group B specimens was 45.59 ± 0.63 KHN after application of die hardener, 40.2 ± 0.63 KHN after 24 h air drying, 38.28 ± 0.55 KHN after microwave oven drying and 19.91 ± 0.64 KHN after 1 h air drying. Conclusion: Group A showed better results than Group B at all times. Application of the die hardener showed highest hardness values followed in the order by 24 h air drying, microwave oven drying and 1 h air drying in both groups. The study showed that air drying the dies for 24 h followed by application of a single layer of the die hardener produced the best surface hardness and is recommended to be followed in practice. PMID:26124610

  16. PERSISTENT MEDIAN ARTERY ASSOCIATED WITH SUPERFICIA L RADIAL ARTERY AT THE WRIST- A CASE REPORT

    Directory of Open Access Journals (Sweden)

    Jayasabarinathan

    2013-02-01

    Full Text Available ABSTRACT: Vascular variations are usually the result of deve lopmental anomaly during the formation of blood vessels in any respective part of the body. In this case a rare unilateral variation was found on the left upper limb during rou tine dissection in the Department of Anatomy. Brachial artery divided into radial artery and a common trunk. The common trunk in turn divided into ulnar, median and common inteross eous artery. The median artery was palmar type, had two proper palmar digital branches in t he palm. The radial artery had normal course in the forearm till the junction between upper two third and lower one third where it turned dorsally and reached the anatomical snuff bo x and ran superficial to the abductor pollicis longus, extensor carpi radialis brevis and extensor carpi radialis longus along the cephalic vein medially and superficial branch of radial nerve late rally. The median artery, arose from the common trunk, had pierced the median nerve about 4cm from its origin then ran along the median nerve in the forearm thereby reached the palm where it gave off two common palmar digital branches but did not anastomose with the ul nar artery hence formed incomplete superficial palmar arch. But on the right side no suc h variations found. These vascular variations have been studied in detail and their cl inical implications and embryological significance are emphasized.

  17. Two New Type Surface Polaritons Excited into Nanoholes in Metal Films

    Directory of Open Access Journals (Sweden)

    Minasyan V. N.

    2010-04-01

    Full Text Available We argue that the smooth metal-air interface should be regarded as a distinct dielectric medium, the skin of the metal. Here we present quantized Maxwell’s equations for electromagnetic field in an isotropic homogeneous medium, allowing us to solve the absorption anomaly property of these metal films. The results imply the existence of light quasi-particles with spin one and effective mass m = 2.5 E-5 me which in turn provide the presence of two type surface polaritons into nanoholes in metal films.

  18. Molecule-surface interaction processes of relevance to gas blanket type fusion device divertor design

    Energy Technology Data Exchange (ETDEWEB)

    Snowdon, K.J. [Newcastle Univ. (United Kingdom). Dept. of Physics; Tawara, H.

    1997-01-01

    The mechanisms which may lead to the departure of molecular species from surfaces exposed to low energy (0.1-100 eV) particle or photon and electron irradiation are reviewed. Where possible, the charge and electronic state, angular, translational and internal energy distributions of the departing molecules are described and the physical origin of the nature of those distributions identified. The consequences, for the departing molecules, of certain material choices become apparent from such an analysis. Such information may help guide the choice of appropriate materials for plasma facing components of gas-blanket type divertors such as that recently proposed for the International Thermonuclear Experimental Reactor (ITER). (author). 71 refs.

  19. Error determination of a successive correction type objective analysis scheme. [for surface meteorological data

    Science.gov (United States)

    Smith, D. R.; Leslie, F. W.

    1984-01-01

    The Purdue Regional Objective Analysis of the Mesoscale (PROAM) is a successive correction type scheme for the analysis of surface meteorological data. The scheme is subjected to a series of experiments to evaluate its performance under a variety of analysis conditions. The tests include use of a known analytic temperature distribution to quantify error bounds for the scheme. Similar experiments were conducted using actual atmospheric data. Results indicate that the multiple pass technique increases the accuracy of the analysis. Furthermore, the tests suggest appropriate values for the analysis parameters in resolving disturbances for the data set used in this investigation.

  20. Lack of a surface layer in Tannerella forsythia mutants deficient in the type IX secretion system

    OpenAIRE

    Narita, Yuka; Sato, Keiko; Yukitake, Hideharu; Shoji, Mikio; Nakane, Daisuke; Nagano, Keiji; Yoshimura, Fuminobu; Naito, Mariko; Nakayama, Koji

    2014-01-01

    Tannerella forsythia, a Gram-negative anaerobic bacterium, is an important pathogen in periodontal disease. This bacterium possesses genes encoding all known components of the type IX secretion system (T9SS). T. forsythia mutants deficient in genes orthologous to the T9SS-encoding genes porK, porT and sov were constructed. All porK, porT and sov single mutants lacked the surface layer (S-layer) and expressed less-glycosylated versions of the S-layer glycoproteins TfsA and TfsB. In addition, t...

  1. Smell identification of spices using nanomechanical membrane-type surface stress sensors

    Science.gov (United States)

    Imamura, Gaku; Shiba, Kota; Yoshikawa, Genki

    2016-11-01

    Artificial olfaction, that is, a chemical sensor system that identifies samples by smell, has not been fully achieved because of the complex perceptional mechanism of olfaction. To realize an artificial olfactory system, not only an array of chemical sensors but also a valid feature extraction method is required. In this study, we achieved the identification of spices by smell using nanomechanical membrane-type surface stress sensors (MSS). Features were extracted from the sensing signals obtained from four MSS coated with different types of polymers, focusing on the chemical interactions between polymers and odor molecules. The principal component analysis (PCA) of the dataset consisting of the extracted parameters demonstrated the separation of each spice on the scatter plot. We discuss the strategy for improving odor identification based on the relationship between the results of PCA and the chemical species in the odors.

  2. Management of sternal osteomyelitis and mediastinal infection following median sternotomy

    Institute of Scientific and Technical Information of China (English)

    GAO Ju; WANG Wen-zhang; WANG You-li; LU Shu-qiang; CAI Ai-bing; YANG Zhi-fu; HAN Zhi-yi; LI Jiu-jiang; WEN Yu-ming; GENG Feng-yong

    2010-01-01

    Background Median sternotomy is considered the most usually performed procedure in cardiac operations. This study aimed to assess clinical effectiveness of bilateral pectoralis major muscle flaps (BPMMF) for management of sternal osteomyelitis and mediastinal infection following median sternotomy.Methods Clinical data were collected and retrospectively analyzed from twelve patients who underwent the BPMMF transposition for management of sternal osteomyelitis and mediastinal infection following median sternotomy from January 2006 to June 2009. Procedure consisted of rigorous debridement of necrotic tissues, dead space obliteration using the BPMMF, and placement of drainage tubes connected to a negative pressures generator for adequate drainage.Results No patients died of drainage, and all 12 patients had viable BPMMF when discharged from hospital. At 1 week post discharge, 2 patients presented with sternal infection but recovered following local debridement and medication. No patients showed infection recurrence during the follow-up period over 10 months.Conclusions Sternal osteomyelitis and mediastinal infection following median sternotomy may be effectively managed through rigorous debridement of infected soft tissues, resection of the damaged stermal segment, transposition of the BPMMF to fill the damaged sternum resulting from debridement, and adequate postoperative drainage.

  3. Mean, Median and Mode from a Decision Perspective

    Science.gov (United States)

    Holt, Melinda Miller; Scariano, Stephen M.

    2009-01-01

    The classroom activity described here allows mathematically mature students to explore the role of mean, median and mode in a decision-making environment. While students discover the importance of choosing a measure of central tendency, their understanding of probability distributions, maximization, and prediction is reinforced through active…

  4. A novel image inpainting technique based on median diffusion

    Indian Academy of Sciences (India)

    Rajkumar L Biradar; Vinayadatt V Kohir

    2013-08-01

    Image inpainting is the technique of filling-in the missing regions and removing unwanted objects from an image by diffusing the pixel information from the neighbourhood pixels. Image inpainting techniques are in use over a long time for various applications like removal of scratches, restoring damaged/missing portions or removal of objects from the images, etc. In this study, we present a simple, yet unexplored (digital) image inpainting technique using median filter, one of the most popular nonlinear (order statistics) filters. The median is maximum likelihood estimate of location for the Laplacian distribution. Hence, the proposed algorithm diffuses median value of pixels from the exterior area into the inner area to be inpainted. The median filter preserves the edge which is an important property needed to inpaint edges. This technique is stable. Experimental results show remarkable improvements and works for homogeneous as well as heterogeneous background. PSNR (quantitative assessment) is used to compare inpainting results.

  5. Elementary School Teachers' Understanding of the Mean and Median

    Science.gov (United States)

    Jacobbe, Tim

    2012-01-01

    This study provides a snapshot of elementary school teachers' understanding of the mean and median. The research is presented in light of recent work regarding preservice teachers' understanding of the mean. Common misconceptions are identified which lead to potential implications for teacher preparation programs. One of the primary concerns…

  6. Iatrogenic selective lesion of the median nerve at the elbow.

    Science.gov (United States)

    Di Fabio, Roberto; Casali, Carlo; Pierelli, Francesco

    2010-03-01

    A lesion of the median nerve may occur as a consequence of a compression by a haematoma or for a direct damage of the axons caused by a needle insertion. To date, no investigation reported a very selective lesion of the median nerve at the elbow, with the suffering limited only to the fibres for the first digit. A 53 year-old left-handed violinist underwent an arterial blood gas drawing. The patient complained immediately of an electrical shock impression going down the arm, followed by pin sensation into the first finger. A tingling sensation associated with numbness in the first fingertip and difficulty in the index-thumb pinch became progressively evident. The ENG-EMG findings showed an impairment mainly of the sensory fibres innervating the first digit and a drop of the motor action potential amplitude when the nerve was stimulated at the elbow. We reported a very partial lesion of the left median nerve at the elbow in a violinist who had a selective involvement of the fibres for his first digit. Even minimal lesions of the median nerve may impair severely the quality of life of patients.

  7. Comparison of different cloud types from surface and satellite cloud classification products over China

    Science.gov (United States)

    Wang, Minyan; Zeng, Le; Wang, Shengjie; Gu, Junxia; Yang, Runzhi

    2016-04-01

    Different cloud types usually have different cloud dynamic process and micro-physical characteristics, and the relative cloud radiation forcing effects vary much. In recent years, the focus of cloud classification is the algorithm development, as well as the analysis on total cloud amount, high/middle/low cloud amount. While, research on the different cloud types (like cirrus, stratus, and cumulonimbus) is not enough. In this research, we use multi-resources cloud classification products including FY-2, Cloudsat and surface observation to obtain the temporal-spatial distribution characteristics and evolvement of different cloud types in different regions of China, analyze the quantitative difference of multi-source products and the reasons. According to the temporal and spatial scales of cloud, and temporal-spatial representation of cloud classification products based on CloudSat, etc, the scaling is necessary to explore in temporal-spatial matching/validation research. This research have important scientific significances on understanding the regional characteristics of different cloud types in China, improving the remote sensing retrieve algorithms on cloud classification, temporal-spatial matching/validation techniques of satellite data, and cloud vertical structure parameterized methods in numerical models.

  8. Pressure-enhanced superconductivity in A15-type Nb3 Ge via increased Fermi surface nesting

    Science.gov (United States)

    Stillwell, Ryan; Jeffries, Jason; McCall, Scott; Jenei, Zsolt; Weir, Sam; Vohra, Yogesh

    The A15-type superconductors are the most widely used superconductors in industrial applications yet the physics behind maximizing the superconducting transition temperature is still not completely understood. The highest transition temperatures found to date have recently been reported for high-pressure hydride materials and it is believed that they too are BCS-type phonon-mediated superconductors, just like the A15-type superconductors. Understanding the electron-phonon coupling has therefore been brought front stage in the search to understand the mechanisms for optimizing high-temperature superconductors. Using a multi-faceted suite of high-pressure techniques we found that Nb3Ge has an isostructural phase transition at high pressure that correlates directly with a bandstructure change seen in high-pressure magnetotransport measurements. Our results suggest that A15-type superconductivity is not only phonon-mediated but that the degree of Fermi surface nesting is a controlling parameter for maximizing the superconducting transition temperature. Lawrence Livermore National Laboratory is operated by Lawrence Livermore National Security, LLC, for the U.S. Department of Energy, National Nuclear Security Administration under Contract DE-AC52-07NA27344.

  9. Dynamic behavior of water droplets on solid surfaces with pillar-type nanostructures.

    Science.gov (United States)

    Jeong, Woog-Jin; Ha, Man Yeong; Yoon, Hyun Sik; Ambrosia, Matthew

    2012-03-27

    In the present study, we investigated the static and dynamic behavior of water droplets on solid surfaces featuring pillar-type nanostructures by using molecular dynamics simulations. We carried out the computation in two stages. As a result of the first computational stage, an initial water cube reached an equilibrium state at which the water droplet showed different shapes depending on the height and the lateral and gap dimensions of the pillars. In the second computational stage, we applied a constant body force to the static water droplet obtained from the first computational stage and evaluated the dynamic behavior of the water droplet as it slid along the pillar-type surface. The dynamic behavior of the water droplet, which could be classified into three different groups, depended on the static state of the water droplet, the pillar characteristics (e.g., height and the lateral and gap dimensions of the pillars), and the magnitude of the applied body force. We obtained the advancing and receding contact angles and the corresponding contact angle hysteresis of the water droplets, which helped classify the water droplets into the three different groups.

  10. Surface-type humidity sensor based on cellulose-PEPC for telemetry systems

    Institute of Scientific and Technical Information of China (English)

    Kh. S. Karimov; M.Saleem; T. A. Qasuria; M. Farooq

    2011-01-01

    Au/cellulose-PEPC/Au surface-type humidity sensors were fabricated by drop-casting cellulose and poly-N-epoxypropylcarbazole (PEPC) blend thin films. A blend of 2wt% of each cellulose and PEPC in benzol was used for the deposition of humidity sensing films. Blend films were deposited on glass substrates with preliminary deposited surface-type gold electrodes. Films of different thicknesses of cellulose and PEPC composite were deposited by drop-casting technique. A change in electrical resistance and capacitance of the fabricated devices was observed by increasing the relative humidity in the range of 0-95% RH. It was observed that the capacitances of the sensors increase, while their resistances decrease with increasing the relative humidity. The sensors were connected to op-amp square wave oscillators. It was observed that with increasing the relative humidity, the oscillator's frequencies were also increased in the range of 4.2-12.0 kHz for 65/μm thick film sample, 4.1-9.0 kHz for 88 μm thick film sample, and 4.2-9.0 kHz for 210 μm sample. Effects of film thickness on the oscillator's frequency with respect to humidity were also investigated. This polymer humidity sensor controlled oscillator can be used for short-range and long-range remote systems at environmental monitoring and assessment of the humidity level.

  11. Height estimate for special Weingarten surfaces of elliptic type in ${\\mathbb M}^2(c \\times \\mathbb {R}$

    Directory of Open Access Journals (Sweden)

    Filippo Morabito

    2014-01-01

    Full Text Available In this article we provide a vertical height estimate for compact special Weingarten surfaces of elliptic type in ²(×ℝ, i.e. surfaces whose mean curvature ℍ and extrinsic Gauss curvature ₑ satisfy ℍ=(ℍ²-ₑ with 4(’(²<1, for all ∈[0,+∞. The vertical height estimate generalizes a result by Rosenberg and Sa Earp and applies only to surfaces verifying a height estimate condition. When <0, using also a horizontal height estimate, we show a non-existence result for properly embedded Weingarten surfaces of elliptic type in ℍ²(×ℝ with finite topology and one end.

  12. The co-adsorption of copper and oxygen on a tungsten 100 plane-type surface

    Science.gov (United States)

    Bauer, E.; Poppa, H.; Davis, P. R.; Viswanath, Y.

    1978-01-01

    The coadsorption of Cu on O2 and a W 100 plane-type surface is studied by Auger electron spectroscopy, thermal desorption, low energy electron diffraction and by work function change measurements. It is shown that the presence of Cu on the surface initially decreases the sticking coefficient of O2. For longer oxygen exposures and for higher adsorption temperatures, the coverage of preadsorbed oxygen reaches values larger than those on the clean surface for the same O2 exposure. Except at the highest values and temperatures of the coverage of preadsorbed oxygen, the sticking coefficient for copper is unity and is independent of the oxygen coverage in the range studied. Coadsorption at room temperatures does not produce any long range order while coadsorption at elevated temperature leads to ordered structures. The saturation coverage of the two dimensional coadsorbate at 800 K is given by a relation. The work function is a complicated function of the coverage of preadsorbed oxygen and the coverage of preadsorbed Cu and is determined predominantly by the temperature at which oxygen is adsorbed. At high temperatures the sequence of adsorption has no influence, in contrast to the room temperature behavior.

  13. Dynamic analysis of new type elastic screen surface with multi degree of freedom and experimental validation

    Institute of Scientific and Technical Information of China (English)

    宋宝成; 刘初升; 彭利平; 李珺

    2015-01-01

    A feasible method was proposed to improve the vibration intensity of screen surface via application of a new type elastic screen surface with multi degree of freedom (NTESSMDF). In the NTESSMDF, the primary robs were coupled to the main screen structure with ends embedded into the elastomers, and the secondary robs were attached to adjacent two primary robs with elastic bands. The dynamic model of vibrating screen with NTESSMDF was established based on Lagrange’s equation and the equivalent stiffnesses of the elastomer and elastic band were calculated. According to numerical simulation using the 4th order Runge-Kutta method, the vibration intensity of screen surface can be enhanced substantially with an averaged acceleration amplitude increasing ratio of 72.36%. The primary robs and secondary robs vibrate inversely in steady state, which would result in the friability of materials and avoid stoppage. The experimental results validate the dynamic characteristics with acceleration amplitude rising by 62.93%on average, which demonstrates the feasibility of NTESSMDF.

  14. Synthesis and surface activities of a novel di-hydroxyl-sulfate-betaine-type zwitterionic gemini surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Geng, Xiang F., E-mail: gengxiangfei1988111@126.com [School of Chemistry and Chemical Engineering, Southwest Petroleum University, Chengdu 610500 (China); State Key Laboratory of Oil and Gas Reservoir Geology and Exploration, Southwest Petroleum University, Chengdu 610500 (China); Hu, Xing Q.; Xia, Ji J. [School of Chemistry and Chemical Engineering, Southwest Petroleum University, Chengdu 610500 (China); State Key Laboratory of Oil and Gas Reservoir Geology and Exploration, Southwest Petroleum University, Chengdu 610500 (China); Jia, Xue C. [Institute of Resources and Environmental, Southwest Petroleum University, Chengdu 610500 (China)

    2013-04-15

    A series of novel di-hydroxyl-sulfate-betaine-type zwitterionic gemini surfactants of 1,2-bis[N-ethyl-N-(2-hydroxyl-3-sulfopropyl)-alkylammonium] alkyl betaines (DBA{sub s–n}, where s and n represent the spacer length of 2, 4 and 6 and the hydrocarbon chain length of 8, 12, 14, 16 and 18, respectively) were synthesized by reacting alkylamine with sodium 3-chloro-2-hydroxypropanesulfonate (the alternative sulphonated agent), followed by the reactions with a,ω-dibromoalkyl and then ethyl bromide. Their adsorption and aggregation properties were investigated by means of equilibrium surface tension, dynamic light-scattering (DLS) and transmission electron microscopy (TEM). DBA{sub s–n} gemini surfactants showed excellent surface activities and packed tightly at the interface. For example, the minimum CMC value for DBA{sub s–n} series was of the order of 10{sup −5} M and the surface tension of water can be decreased as low as 22.2 mN/m. It was also found that the aggregates of DBA{sub s–n} solutions were significantly dependent on their hydrocarbon chain lengths. The aggregates changed from vesicles to entangled fiber-like micelles as the chain length increased from dodecyl to tetradecyl.

  15. Synthesis and surface activities of a novel di-hydroxyl-sulfate-betaine-type zwitterionic gemini surfactants

    Science.gov (United States)

    Geng, Xiang F.; Hu, Xing Q.; Xia, Ji J.; Jia, Xue C.

    2013-04-01

    A series of novel di-hydroxyl-sulfate-betaine-type zwitterionic gemini surfactants of 1,2-bis[N-ethyl-N-(2-hydroxyl-3-sulfopropyl)-alkylammonium] alkyl betaines (DBAs-n, where s and n represent the spacer length of 2, 4 and 6 and the hydrocarbon chain length of 8, 12, 14, 16 and 18, respectively) were synthesized by reacting alkylamine with sodium 3-chloro-2-hydroxypropanesulfonate (the alternative sulphonated agent), followed by the reactions with а,ω-dibromoalkyl and then ethyl bromide. Their adsorption and aggregation properties were investigated by means of equilibrium surface tension, dynamic light-scattering (DLS) and transmission electron microscopy (TEM). DBAs-n gemini surfactants showed excellent surface activities and packed tightly at the interface. For example, the minimum CMC value for DBAs-n series was of the order of 10-5 M and the surface tension of water can be decreased as low as 22.2 mN/m. It was also found that the aggregates of DBAs-n solutions were significantly dependent on their hydrocarbon chain lengths. The aggregates changed from vesicles to entangled fiber-like micelles as the chain length increased from dodecyl to tetradecyl.

  16. Impact response of a Timoshenko-type viscoelastic beam considering the extension of its middle surface.

    Science.gov (United States)

    Rossikhin, Yury A; Shitikova, Marina V; Meza, Maria Guadalupe Estrada

    2016-01-01

    In the present paper, the problem of low-velocity impact of an elastic sphere against a viscoelastic Timoshenko-type beam is studied considering the extension of its middle surface. The viscoelastic features of the beam out of the contact domain are governed by the standard linear solid model with derivatives of integer order, while within the contact domain the fractional derivative standard linear solid model is utilized, in so doing rheological constants of the material in both models are the same. However the presence of the additional parameter, i.e. fractional parameter which could vary from zero to unit, allows one to vary beam's viscosity, since the structure of the beam's material within this zone may be damaged, resulting in the decrease of the beam material viscosity in the contact zone. Consideration for transient waves (surfaces of strong discontinuity) propagating in the target out of the contact zone via the theory of discontinuities and determination of the desired values behind the surfaces of discontinuities upto the contact domain with the help of ray series, as well as the utilization of the Hertz theory in the contact zone allow one to obtain a set of two integro-differential equations, which govern the desired values, namely: the local bearing of the target and impactor's materials and the displacement of the beam within the contact domain.

  17. Residual stress and electromagnetic characteristics in loop type frequency selective surface embedded hybrid structures

    Energy Technology Data Exchange (ETDEWEB)

    Park, Kyung Mi; Seo, Yun Seok; Chun, Heoung Jae [Yonsei University, Seoul (Korea, Republic of); Hong, Ik Pyo [Kongju National University, Cheonan (Korea, Republic of); Park, Yong Bae [Ajoo University, Suwon (Korea, Republic of); Kim, Yoon Jae [Agency for defense development, Daejeon (Korea, Republic of)

    2015-01-15

    Residual stresses occur in frequency-selective surface (FSS)-embedded composite structures after co-curing due to differences between the coefficients of thermal expansion between composite skins and FSSs. Furthermore, the electromagnetic characteristics may be affected by the deformation of the FSS pattern by residual stresses. Therefore, we studied the changes in electromagnetic characteristics due to the deformation of FSS, using residual stresses to deform loop-type FSS-embedded hybrid composites. We considered the effects of loop-type FSS patterns of equal dimension as well as the stacking sequences of composite laminates on the electromagnetic characteristics of FSSs: Square loop, triangular loop and circular loop. The stacking sequences of composite laminates considered in this study were [0]{sub 8}, [0/90]{sub 4}, [+-45]{sub 4} and [0/+-45/90]{sub 2}. The FSS was located between composite laminates in the middle plane. To determine the residual stresses and deformations in the FSS embedded laminate structures, the thermal loading condition in the finite element analysis was induced by cooling the hybrid structures from 125 .deg. C to 20 .deg. C based on the cure cycle of the composite. Also, the electromagnetic reflection characteristics of the hybrid structures were predicted using deformed models by residual stresses, considering the effects of stacking sequence of composite laminates. The results showed that the maximum residual stresses and deformations were produced in the [0]{sub 8} composites with all three loop-types of FSS pattern. However, the maximum resonance frequency shifts occurred in the square and triangle loop-types with stacking sequence of [0]{sub 8} , while the maximum resonance frequency shift occurred in the circular loop-type with stacking sequence of [0/+-45/90]{sub 2}.

  18. Interaction between mouse adenovirus type 1 and cell surface heparan sulfate proteoglycans.

    Directory of Open Access Journals (Sweden)

    Liesbeth Lenaerts

    Full Text Available Application of human adenovirus type 5 (Ad5 derived vectors for cancer gene therapy has been limited by the poor cell surface expression, on some tumor cell types, of the primary Ad5 receptor, the coxsackie-adenovirus-receptor (CAR, as well as the accumulation of Ad5 in the liver following interaction with blood coagulation factor X (FX and subsequent tethering of the FX-Ad5 complex to heparan sulfate proteoglycan (HSPG on liver cells. As an alternative vector, mouse adenovirus type 1 (MAV-1 is particularly attractive, since this non-human adenovirus displays pronounced endothelial cell tropism and does not use CAR as a cellular attachment receptor. We here demonstrate that MAV-1 uses cell surface heparan sulfate proteoglycans (HSPGs as primary cellular attachment receptor. Direct binding of MAV-1 to heparan sulfate-coated plates proved to be markedly more efficient compared to that of Ad5. Experiments with modified heparins revealed that the interaction of MAV-1 to HSPGs depends on their N-sulfation and, to a lesser extent, 6-O-sulfation rate. Whereas the interaction between Ad5 and HSPGs was enhanced by FX, this was not the case for MAV-1. A slot blot assay demonstrated the ability of MAV-1 to directly interact with FX, although the amount of FX complexed to MAV-1 was much lower than observed for Ad5. Analysis of the binding of MAV-1 and Ad5 to the NCI-60 panel of different human tumor cell lines revealed the preference of MAV-1 for ovarian carcinoma cells. Together, the data presented here enlarge our insight into the HSPG receptor usage of MAV-1 and support the development of an MAV-1-derived gene vector for human cancer therapy.

  19. Surface Passivation and Antireflection Behavior of ALD on n-Type Silicon for Solar Cells

    Directory of Open Access Journals (Sweden)

    Ing-Song Yu

    2013-01-01

    Full Text Available Atomic layer deposition, a method of excellent step coverage and conformal deposition, was used to deposit TiO2 thin films for the surface passivation and antireflection coating of silicon solar cells. TiO2 thin films deposited at different temperatures (200°C, 300°C, 400°C, and 500°C on FZ n-type silicon wafers are in the thickness of 66.4 nm ± 1.1 nm and in the form of self-limiting growth. For the properties of surface passivation, Si surface is effectively passivated by the 200°C deposition TiO2 thin film. Its effective minority carrier lifetime, measured by the photoconductance decay method, is improved 133% at the injection level of  cm−3. Depending on different deposition parameters and annealing processes, we can control the crystallinity of TiO2 and find low-temperature TiO2 phase (anatase better passivation performance than the high-temperature one (rutile, which is consistent with the results of work function measured by Kelvin probe. In addition, TiO2 thin films on polished Si wafer serve as good ARC layers with refractive index between 2.13 and 2.44 at 632.8 nm. Weighted average reflectance at AM1.5G reduces more than half after the deposition of TiO2. Finally, surface passivation and antireflection properties of TiO2 are stable after the cofire process of conventional crystalline Si solar cells.

  20. Arrangement of type IV collagen on NH₂ and COOH functionalized surfaces.

    Science.gov (United States)

    Coelho, Nuno Miranda; González-García, Cristina; Salmerón-Sánchez, Manuel; Altankov, George

    2011-12-01

    Apart from the paradigm that cell-biomaterials interaction depends on the adsorption of soluble adhesive proteins we anticipate that upon distinct conditions also other, less soluble ECM proteins such as collagens, associate with the biomaterials interface with consequences for cellular response that might be of significant bioengineering interest. Using atomic force microscopy (AFM) we seek to follow the nanoscale behavior of adsorbed type IV collagen (Col IV)--a unique multifunctional matrix protein involved in the organization of basement membranes (BMs) including vascular ones. We have previously shown that substratum wettability significantly affects Col IV adsorption pattern, and in turn alters endothelial cells interaction. Here we introduce two new model surfaces based on self-assembled monolayers (SAMs), a positively charged -NH(2) , and negatively charged -COOH surface, to learn more about their particular effect on Col IV behavior. AFM studies revealed distinct pattern of Col IV assembly onto the two SAMs resembling different aspects of network-like structure or aggregates (suggesting altered protein conformation). Moreover, the amount of adsorbed FITC-labeled Col IV was quantified and showed about twice more protein on NH(2) substrata. Human umbilical vein endothelial cells attached less efficiently to Col IV adsorbed on negatively charged COOH surface judged by altered cell spreading, focal adhesions formation, and actin cytoskeleton development. Immunofluorescence studies also revealed better Col IV recognition by both α(1) and α(2) integrins on positively charged NH(2) substrata resulting in higher phosphorylated focal adhesion kinase recruitment in the focal adhesion complexes. On COOH surface, no integrin clustering was observed. Taken altogether these results, point to the possibility that combined NH(2) and Col IV functionalization may support endothelization of cardiovascular implants.

  1. Superhydrophobic aluminium-based surfaces: Wetting and wear properties of different CVD-generated coating types

    Science.gov (United States)

    Thieme, M.; Streller, F.; Simon, F.; Frenzel, R.; White, A. J.

    2013-10-01

    In view of generating superhydrophobic aluminium-based surfaces, this work presents further results for the combination of anodic oxidation as the primary pretreatment method and chemical vapour deposition (CVD) variants for chemical modification producing coatings of 250-1000 nm thickness. In detail, CVD involved the utilisation of i - hexafluoropropylene oxide as precursor within the hot filament CVD process for the deposition of poly(tetrafluoroethylene) coatings at alternative conditions (PTFE-AC) and ii - 1,3,5-trivinyltrimethylcyclotrisiloxane for the deposition of polysiloxane coatings (PSi) by initiated CVD. The substrate material was Al Mg1 subjected to usual or intensified sulphuric acid anodisation pretreatments (SAAu, SAAi, respectively) affording various degrees of surface micro-roughness (SAAu weathering and/or mild wear testing. Superhydrophobicity (SH) was observed with the system SAAi + PTFE-AC similarly to former findings with the standard hot filament CVD PTFE coating variant (SAAi + PTFE-SC). The results indicated that the specific coating morphology made an important contribution to the water-repellency, because even some of the SAAu-based samples tended to reveal SH. Subjecting samples to weathering treatment resulted in a general worsening of the wetting behaviour, primarily limited to the receding contact angles. These tendencies were correlated with the chemical composition of the sample surfaces as analysed by X-ray photoelectron spectroscopy. The wear tests showed, as evaluated by scanning electron microscopy and contact angle measurement, that the PTFE coatings were relatively sensitive to friction. This was connected with a dramatic deterioration of the water-repelling properties. PSi-coated surfaces generally showed rather poor water-repellency, but this coating type was surprisingly resistant towards the applied friction test. From these findings it may be concluded that the combination of hydrophobic fluorine containing structure

  2. Dynamic surface soil components of land and vegetation types in Kebbi State Nigeria

    Directory of Open Access Journals (Sweden)

    Suleiman Usman

    2016-04-01

    Full Text Available Land and vegetation are important components of soil and provides many benefits to surface soil including protection against erosion, climate change impact and unacceptable degradation of soil particles. Visual Soil Assessment was used as a mechanism to assess and classify the land and vegetation types of some agricultural sites in Kebbi State, Nigeria. The aim was to get better understanding of the environmental soil function for sustainable crop production in dryland and fadama areas of the State. The assessment was able to put together combinations of different vegetation types and land age classes. It is valued that the land age classes possessed the characteristics of Holocene-natural, Holocene-anthropogeomorphic, Holocene-young-natural, young-anthropogeomorphic, very-young anthropogeomorphic and very-young natural. However, the vegetation types could be related to evergreen forest, short medium forest (scattered clustered, dwarf vegetation (scattered isolated, grass vegetation, thick vegetation, stony-grass vegetation (scattered sparse and short-length vegetation. The assessment provides an improve understanding of the current status of land and vegetation conditions of the study area and suggested regular soil management for sustainable crop production in the State.

  3. Direct numerical simulation of turbulent flow in a channel with different types of surface roughness

    Science.gov (United States)

    Bolotnov, Igor A.

    2011-11-01

    Direct numerical simulation (DNS) was performed for turbulent channel flow (Reτ = 400) for two types of wall surface roughness and well as smooth walls. The roughness elements of first type were assumed to be two-dimensional, transverse square rods positioned on both walls in a non-staggered arrangement. The height of the rods corresponds to y+ = 13.6 and thus extends in the buffer layer. The second type of roughness was represented by a set of hemispherical obstacles (height of y+ = 10) located on both channel walls and arranged on a square lattice. The presented simulations are part of benchmark problems defined by thermal-hydraulics focus area of the Consortium for Advanced Simulations of Light Water Reactors (CASL). This problem simulates the effect of the presence of growing bubbles on the walls of nuclear reactor fuel rods and aimed on evaluating CFD capabilities of various codes before applying them to more advanced problems. Mean turbulent quantities were computed and compared with available analytical and experimental results. The results of this work will be used to evaluate the performance of other LES and RANS codes on this benchmark problem. Supported by Consortium for Advanced Simulation of Light Water Reactors (CASL).

  4. Monte Carlo simulations for a Lotka-type model with reactant surface diffusion and interactions.

    Science.gov (United States)

    Zvejnieks, G; Kuzovkov, V N

    2001-05-01

    The standard Lotka-type model, which was introduced for the first time by Mai et al. [J. Phys. A 30, 4171 (1997)] for a simplified description of autocatalytic surface reactions, is generalized here for a case of mobile and energetically interacting reactants. The mathematical formalism is proposed for determining the dependence of transition rates on the interaction energy (and temperature) for the general mathematical model, and the Lotka-type model, in particular. By means of Monte Carlo computer simulations, we have studied the impact of diffusion (with and without energetic interactions between reactants) on oscillatory properties of the A+B-->2B reaction. The diffusion leads to a desynchronization of oscillations and a subsequent decrease of oscillation amplitude. The energetic interaction between reactants has a dual effect depending on the type of mobile reactants. In the limiting case of mobile reactants B the repulsion results in a decrease of amplitudes. However, these amplitudes increase if reactants A are mobile and repulse each other. A simplified interpretation of the obtained results is given.

  5. Surgical Repair of a Median Cleft of the Upper Lip via a Pfeifer Incision: A Case Report

    Science.gov (United States)

    Pandey, Rajeev; Gupta, Rajat; Bhagat, Nitin; Verma, Aviral

    2016-01-01

    Median cleft is the midline cleft of the lip. It develops due to incomplete or failed fusion of the median nasal prominence. It can present with minimal deformities such as involvement of the vermilion border, or complex clefting of the midline structures and brain. Median clefts are broadly classified as true and false clefts. This case report describes a rare case of median cleft of the upper lip involving the white roll, which was not associated with any other deformities. Treatment included reconstruction of the philtrum and the cupid's bow while maintaining vermilion fullness and continuity, and minimizing scar formation. Various techniques have been advocated for treatment of this type of median upper lip cleft. Here we describe a technique using Pfeifer incision to correct our patient's defect. Pfeifer incision consists of wavy lines and its use has been advocated for correction of various craniofacial abnormalities. PMID:27928243

  6. Intraneural hemangioma of the median nerve: A case report

    Directory of Open Access Journals (Sweden)

    Sevinç Teoman

    2008-02-01

    Full Text Available Abstract Hemangiomas of the median nerve are very rare and, so far, only ten cases of intraneural hemangioma of this nerve have been reported in the literature. We present a case of 14-year-old girl who had a soft tissue mass in the region of the left wrist with signs and symptoms of carpal tunnel syndrome. Total removal of the mass was achieved using microsurgical epineural and interfasicular dissection. The symptoms were relieved completely, after this procedure, without any neurologic deficit. On follow-up two years later, no recurrence was observed. Whenever a child or young adult patient presents with CTS the possibility of a hemangioma involving the median nerve should be kept in mind in the differential diagnosis.

  7. Median Statistics and the Mass Density of the Universe

    CERN Document Server

    Chen, G; Chen, Gang; Ratra, Bharat

    2003-01-01

    We use weighted mean and median statistics techniques to combine individual estimates of Omega_m0, the present mean mass density in non-relativistic matter, and determine the observed values and ranges of Omega_m0 from different combinations of data. The derived weighted mean Omega_m0 values are not good representatives of the individual measurements, under the assumptions of Gaussianity and negligible correlation between the individual measurements. This could mean that some observational error bars are under-estimated. Discarding the most discrepant about 5% of the measurements generally alleviates but does not completely resolve this problem. While the results derived from the different combinations of data are not identical, they are mostly consistent, and a reasonable summary of the median statistics analyses is 0.2 <= Omega_m0 <= 0.35 at two standard deviations.

  8. A Rank Test on Equality of Population Medians

    Directory of Open Access Journals (Sweden)

    Pooi Ah Hin

    2013-02-01

    Full Text Available The Kruskal-Wallis test is a non-parametric test for the equality of K population medians. The test statistic involved is a measure of the overall closeness of the K average ranks in the individual samples to the average rank in the combined sample. The resulting acceptance region of the test however may not be the smallest region with the required acceptance probability under the null hypothesis. Presently an alternative acceptance region is constructed such that it has the smallest size, apart from having the required acceptance probability. Compared to the Kruskal-Wallis test, the alternative test is found to have larger average power computed from the powers along the evenly chosen directions of deviation of the medians.

  9. The median recoil direction as a WIMP directional detection signal

    CERN Document Server

    Green, Anne M

    2010-01-01

    Direct detection experiments have reached the sensitivity required to detect dark matter WIMPs. Demonstrating that a putative signal is due to WIMPs, and not backgrounds, is a major challenge however. The direction dependence of the WIMP scattering rate provides a potential WIMP `smoking gun'. If the WIMP distribution is predominantly smooth, the Galactic recoil distribution is peaked in the direction opposite to the direction of Solar motion. Previous studies have found that, for an ideal detector, of order 10 WIMP events would be sufficient to reject isotropy, and rule out an isotropic background. We examine how the median recoil direction could be used to confirm the WIMP origin of an anisotropic recoil signal. Specifically we determine the number of events required to reject the null hypothesis that the median direction is random (corresponding to an isotropic Galactic recoil distribution) at 95% confidence. We find that for zero background 31 events are required, a factor of roughly 2 more than are requi...

  10. Cortical plasticity in response to median nerve trauma

    OpenAIRE

    2016-01-01

    Median nerve injuries in adults, repaired with nerve suture, lead to incomplete functional recovery despite improved surgical technique. This results in a reduction in quality of life, poorer working ability and a considerable expense for society. Misrouting of axons at the suture site connects regenerating axons to the wrong distal end organs. When distorted signals are conveyed to the dorsal root ganglia, spinal cord, thalamus and the somatosensory cortex, somatotopic maps at...

  11. Educational system, income inequality and growth: the median voter's decision

    Directory of Open Access Journals (Sweden)

    Joilson Dias

    2005-03-01

    Full Text Available I analyze a long run educational policy as a mechanism to close the income gap among low, median and high-income families. If the choice is made endogenous by the use of the median voter theorem, the results are as follow: i public education system guarantees income convergence, however the income growth rate of the median voter is smaller; ii the combination public and private (hybrid educational system allows faster income growth rate, but income inequality is almost the natural outcome. The ending result is that the combination public and private system will prevail, since the income growth rate of the median voter is higher in this system. This might explain the persistence and differences of income inequality among the economies.O objetivo deste artigo é analisar a utilização da política educacional no longo prazo como mecanismo para a redução da desigualdade de renda entre famílias de renda baixa, mediana e alta. Se a decisão sobre a política for endogeneizada, de acordo com o teorema do eleitor mediano, os resultados são os seguintes: i o sistema educacional público para todos, apesar de garantir convergência de renda, produz uma menor taxa de crescimento da renda do eleitor mediano; ii a combinação público-privado (sistema educacional híbrido permite uma maior taxa de crescimento da renda do eleitor mediano, no entanto a desigualdade de renda é inerente a este sistema. Como resultado final, o eleitor mediano irá escolher o sistema público-privado, pois o crescimento da sua renda é maior, o que pode explicar a persistência e as diferenças na desigualdade de renda das economias.

  12. Microseismic event denoising via adaptive directional vector median filters

    Science.gov (United States)

    Zheng, Jing; Lu, Ji-Ren; Jiang, Tian-Qi; Liang, Zhe

    2017-03-01

    We present a novel denoising scheme via Radon transform-based adaptive vector directional median filters named adaptive directional vector median filter (AD-VMF) to suppress noise for microseismic downhole dataset. AD-VMF contains three major steps for microseismic downhole data processing: (i) applying Radon transform on the microseismic data to obtain the parameters of the waves, (ii) performing S-transform to determine the parameters for filters, and (iii) applying the parameters for vector median filter (VMF) to denoise the data. The steps (i) and (ii) can realize the automatic direction detection. The proposed algorithm is tested with synthetic and field datasets that were recorded with a vertical array of receivers. The P-wave and S-wave direct arrivals are properly denoised for poor signal-to-noise ratio (SNR) records. In the simulation case, we also evaluate the performance with mean square error (MSE) in terms of signal-to-noise ratio (SNR). The result shows that the distortion of the proposed method is very low; the SNR is even less than 0 dB.

  13. Ocular surface changes in type II diabetic patients with proliferative diabetic retinopathy

    Institute of Scientific and Technical Information of China (English)

    Yan; Gao; Yan; Zhang; Yu-Sha; Ru; Xiao-Wu; Wang; Ji-Zhong; Yang; Chun-Hui; Li; Hong-Xing; Wang; Xiao-Rong; Li; Bing; Li

    2015-01-01

    AIM: To detect and analyze the changes on ocular surface and tear function in type II diabetic patients with proliferative diabetic retinopathy(PDR), an advanced stage of diabetic retinopathy(DR), using conventional ophthalmic tests and the high-resolution laser scanning confocal microscopy.METHODS: Fifty-eight patients with type II diabetes were selected. Based on the diagnostic criteria and stage classification of DR, the patients were divided into the non-DR(NDR) group and the PDR group. Thirty-six patients with cataract but no other ocular and systemic disease were included as non-diabetic controls. All the patients were subjected to the conventional clinical tests of corneal sensitivity, Schirmer I test, and corneal fluorescein staining. The non-invasive tear film break-up time(NIBUT) and tear interferometry were conducted by a Tearscope Plus. The morphology of corneal epithelia and nerve fibers was examined using the high-resolution confocal microscopy.RESULTS: The NDR group exhibited significantly declined corneal sensitivity and Schirmer I test value, as compared to the non-diabetic controls(P <0.001). The PDR group showed significantly reduced corneal sensitivity, Schirmer I test value, and NIBUT in comparison to the non-diabetic controls(P <0.001).Corneal fluorescein staining revealed the progressively injured corneal epithelia in the PDR patients. Moreover,significant decrease in the corneal epithelial density andmorphological abnormalities in the corneal epithelia and nerve fibers were also observed in the PDR patients.CONCLUSION: Ocular surface changes, including blunted corneal sensitivity, reduced tear secretion, tear film dysfunction, progressive loss of corneal epithelia and degeneration of nerve fibers, are common in type II diabetic patients, particularly in the diabetic patients with PDR. The corneal sensitivity, fluorescein staining scores,and the density of corneal epithelial cells and nerve fibers in the diabetic patients correlate with the

  14. Synoptic relationships quantified between surface Chlorophyll-a and diagnostic pigments specific to phytoplankton functional types

    Science.gov (United States)

    Hirata, T.; Hardman-Mountford, N. J.; Brewin, R. J. W.; Aiken, J.; Barlow, R.; Suzuki, K.; Isada, T.; Howell, E.; Hashioka, T.; Noguchi-Aita, M.; Yamanaka, Y.

    2010-09-01

    Error-quantified, synoptic-scale relationships between chlorophyll-a (Chla) and phytoplankton pigment groups at the sea surface are presented. A total of nine pigment groups were considered to represent nine phytoplankton functional types (PFTs) including microplankton, nanoplankton, picoplankton, diatoms, dinoflagellates, green algae, picoeukaryotes, prokaryotes and Prochlorococcus sp. The observed relationships between Chla and pigment groups were well-defined at the global scale to show that Chla can be used as an index of not only phytoplankton abundance but also community structure; large (micro) phytoplankton monotonically increase as Chla increases, whereas the small (pico) phytoplankton community generally decreases. Within these relationships, we also found non-monotonic variations with Chla for certain pico-plankton (pico-eukaryotes, Prokaryotes and Prochlorococcus sp.) and for Green Algae and nano-sized phytoplankton. The relationships were quantified with a least-square fitting approach in order to estimate the PFTs from Chla alone. The estimated uncertainty of the relationships quantified depends on both phytoplankton types and Chla concentration. Maximum uncertainty over all groups (34.7% Chla) was found from diatom at approximately Chla = 1.07 mg m-3. However, the mean uncertainty of the relationships over all groups was 5.8 [% Chla] over the entire Chla range observed (0.02 < Chla < 6.84 mg m-3). The relationships were applied to SeaWiFS satellite Chla data from 1998 to 2009 to show the global climatological fields of the surface distribution of PFTs. Results show that microplankton are present in the mid and high latitudes, constituting ~9.0 [% Chla] of the phytoplankton community at the global surface, in which diatoms explain ~6.0 [% Chla]. Nanoplankton are ubiquious throught much of the global surface oceans except subtropical gyres, acting as a background population, constituting ~44.2 [% Chla]. Picoplankton are mostly limited in subtropical

  15. Cannieu-Riche anastomosis of the ulnar to median nerve in the hand: case report.

    Science.gov (United States)

    Paraskevas, G; Ioannidis, O; Martoglou, S

    2010-01-01

    We observed in a male cadaver the presence of a new type of very long Cannieu-Riche anastomosis between the proximal portion of the deep branch of the ulnar nerve for the adductor pollicis and ramus of the recurrent branch of the median nerve to the superficial head of the flexor pollicis brevis. The clinical relevance of such a communication is the possible preservation of the function of all or part of thenar muscles from the ulnar nerve in case of median nerve lesion. The ignorance of that anomaly can induce obscure clinical, surgical and electroneuromyographical findings. We report on the incidence, the double innervation and the clinical significance of Cannieu-Riche anastomosis and provide a new classification of the various types of this nerval connection.

  16. Social Security: a financial appraisal for the median voter.

    Science.gov (United States)

    Galasso, V

    Several explanations have been proposed for why voters continue to support unfunded social security systems. Browning (1975) suggests that the extremely large unfunded pension systems of most democracies depend on the existence of a voting majority composed of middle-aged and older people who fail to fully internalize the cost of financing the system. In fact, when voting, economically rational workers consider only their current and future contributions to the system and their expected pension benefits--not their past contributions, which they regard as sunk costs. If, for a majority of voters, the expected continuation return from social security exceeds the return from alternative assets, an unfunded social security system is politically sustainable. This article explores the validity of Browning's proposition by quantifying the returns that U.S. voters in presidential elections from 1964 to 1996 have obtained, or expect to obtain, from Social Security. Did "investments" in Social Security outperform alternative forms of investment, such as mutual funds or pension funds, for a majority of the voters? What can be expected for the future? The U.S. Social Security system redistributes income within age cohorts on the basis of sex, income, and marital status. To account for some of these features, the median voter is represented by a family unit whose members--a husband who accounts for 70 percent of household earnings and a wife who accounts for 30 percent--make joint economic and voting decisions. Thus, retirement and survival benefits paid out to the spouse of an insured worker can be included in the calculation of Social Security returns. Interval estimates of voters' family incomes from the U.S. Census Bureau were used to obtain the median voter's household earnings. The median voter's age is derived from the ages of those who voted in presidential elections, not from the ages of the entire electorate. The median voter's contributions to Social Security are the

  17. Identification and characterization of the murine cell surface receptor for the urokinase-type plasminogen activator

    DEFF Research Database (Denmark)

    Solberg, H.; Løber, D.; Eriksen, J

    1992-01-01

    Cell-binding experiments have indicated that murine cells on their surface have specific binding sites for mouse urokinase-type plasminogen activator (u-PA). In contrast to the human system, chemical cross-linking studies with an iodinated ligand did not yield any covalent adducts in the murine...... system, but in ligand-blotting analysis, two mouse u-PA-binding proteins could be visualized. To confirm that these proteins are the murine counterpart of the human u-PA receptor (u-PAR), a peptide was derived from the murine cDNA clone assigned to represent the murine u-PAR due to cross......-hybridization and pronounced sequence similarity with human u-PAR cDNA [Kristensen, P., Eriksen, J., Blasi, F. & Danø, K. (1991) J. Cell Biol. 115, 1763-1771]. A rabbit antiserum raised against this peptide specifically recognized two polypeptide bands with electrophoretic mobilities identical to those identified by ligand...

  18. Bulk and Surface Event Identification in p-type Germanium Detectors

    CERN Document Server

    Yang, L T; Jia, L P; Jiang, H; Li, J; Lin, F K; Lin, S T; Liu, S K; Ma, J L; Sharma, V; Singh, L; Singh, M K; Soma, A K; Yang, S W; Wang, L; Wang, Q; Wong, H T; Yue, Q; Zhao, W

    2016-01-01

    The p-type point-contact germanium detectors, due to its sub-keV sensitivities and low internal radioactivity background, are demonstrated to be competitive tools for light dark matter WIMPs searches and may have potential applications in neutrino physics. These detectors exhibit anomalous surface behavior, which has been characterized and dealt with in previous analysis. However, the analysis method rely on spectral shape assumptions and must use external calibration sources. In this report, we purpose an improved method, where in situ data could be used as calibration sources. Data from CDEX-1 and TEXONO experiments will be re-examined and the results are shown to be consistent with both analysis.

  19. Effects of micropatterned surfaces coated with type I collagen on the proliferation and morphology of tenocytes

    Energy Technology Data Exchange (ETDEWEB)

    Chen Xi; Wang Zhi [Institute of Stem Cell and Tissue Engineering, State Key Laboratory of Biotherapy, West China Hospital, Sichuan University, 37 Wainan Guoxue Street, Chengdu 610041, Sichuan (China); Qin Tingwu [Institute of Stem Cell and Tissue Engineering, State Key Laboratory of Biotherapy, West China Hospital, Sichuan University, 37 Wainan Guoxue Street, Chengdu 610041, Sichuan (China)], E-mail: tingwuqin@hotmail.com; Liu Chengjun; Yang Zhiming [Institute of Stem Cell and Tissue Engineering, State Key Laboratory of Biotherapy, West China Hospital, Sichuan University, 37 Wainan Guoxue Street, Chengdu 610041, Sichuan (China)

    2008-11-15

    The effects of micropatterned surfaces coated with type I collagen (CNI) on the proliferation and morphology of rat tail tenocytes were investigated in this study. The micropatterned polydimethylsiloxane substrates were prepared by using the technique of microcontact printing and then coated with different concentrations of CNI by the microfluidic channels technology. After being seeded on the CNI-coated micropatterned substrates, the tenocytes were tested by MTT colorimetric assay at 1-, 3-, 5-, and 7-day time intervals to evaluate the proliferation of tenocytes on the substrates. The alignment and morphology of tenocytes on the CNI-coated substrates after incubation for 1 or 24 h were observed with SEM. The results showed tenocytes proliferated well with increase of CNI concentrations and identically aligned along the grooves of the CNI-coated micropatterned substrates. This could have a potential advantage in construction of engineered tendons in vitro.

  20. Effects of micropatterned surfaces coated with type I collagen on the proliferation and morphology of tenocytes

    Science.gov (United States)

    Chen, Xi; Wang, Zhi; Qin, Ting-Wu; Liu, Cheng-Jun; Yang, Zhi-Ming

    2008-11-01

    The effects of micropatterned surfaces coated with type I collagen (CNI) on the proliferation and morphology of rat tail tenocytes were investigated in this study. The micropatterned polydimethylsiloxane substrates were prepared by using the technique of microcontact printing and then coated with different concentrations of CNI by the microfluidic channels technology. After being seeded on the CNI-coated micropatterned substrates, the tenocytes were tested by MTT colorimetric assay at 1-, 3-, 5-, and 7-day time intervals to evaluate the proliferation of tenocytes on the substrates. The alignment and morphology of tenocytes on the CNI-coated substrates after incubation for 1 or 24 h were observed with SEM. The results showed tenocytes proliferated well with increase of CNI concentrations and identically aligned along the grooves of the CNI-coated micropatterned substrates. This could have a potential advantage in construction of engineered tendons in vitro.

  1. Recurrent Primary Synovial Sarcoma of Median Nerve: A Case Report and Literature Review.

    Science.gov (United States)

    Bhat, A K; Jayakrishnan, K N; Acharya, A M

    2016-10-01

    We report a case of intraneural synovial sarcoma of the median nerve in a 39 year old lady with multiple local recurrences over thirteen years with no distant metastasis. The diagnosis of biphasic type of synovial sarcoma was confirmed by histopathology and immunohistochemistry. At the time of the fourth recurrence below elbow amputation was performed. This case is being reported for its rarity and propensity for local recurrence without distant metastasis.

  2. Microbial colonization in diverse surface soil types in Surtsey and diversity analysis of its subsurface microbiota

    Science.gov (United States)

    Marteinsson, V.; Klonowski, A.; Reynisson, E.; Vannier, P.; Sigurdsson, B. D.; Ólafsson, M.

    2015-02-01

    Colonization of life on Surtsey has been observed systematically since the formation of the island 50 years ago. Although the first colonisers were prokaryotes, such as bacteria and blue-green algae, most studies have been focused on the settlement of plants and animals but less on microbial succession. To explore microbial colonization in diverse soils and the influence of associated vegetation and birds on numbers of environmental bacteria, we collected 45 samples from different soil types on the surface of the island. Total viable bacterial counts were performed with the plate count method at 22, 30 and 37 °C for all soil samples, and the amount of organic matter and nitrogen (N) was measured. Selected samples were also tested for coliforms, faecal coliforms and aerobic and anaerobic bacteria. The subsurface biosphere was investigated by collecting liquid subsurface samples from a 181 m borehole with a special sampler. Diversity analysis of uncultivated biota in samples was performed by 16S rRNA gene sequences analysis and cultivation. Correlation was observed between nutrient deficits and the number of microorganisms in surface soil samples. The lowest number of bacteria (1 × 104-1 × 105 cells g-1) was detected in almost pure pumice but the count was significantly higher (1 × 106-1 × 109 cells g-1) in vegetated soil or pumice with bird droppings. The number of faecal bacteria correlated also to the total number of bacteria and type of soil. Bacteria belonging to Enterobacteriaceae were only detected in vegetated samples and samples containing bird droppings. The human pathogens Salmonella, Campylobacter and Listeria were not in any sample. Both thermophilic bacteria and archaea 16S rDNA sequences were found in the subsurface samples collected at 145 and 172 m depth at 80 and 54 °C, respectively, but no growth was observed in enrichments. The microbiota sequences generally showed low affiliation to any known 16S rRNA gene sequences.

  3. Microbial colonisation in diverse surface soil types in Surtsey and diversity analysis of its subsurface microbiota

    Science.gov (United States)

    Marteinsson, V.; Klonowski, A.; Reynisson, E.; Vannier, P.; Sigurdsson, B. D.; Ólafsson, M.

    2014-09-01

    Colonisation of life on Surtsey has been observed systematically since the formation of the island 50 years ago. Although the first colonisers were prokaryotes, such as bacteria and blue-green algae, most studies have been focusing on settlement of plants and animals but less on microbial succession. To explore microbial colonization in diverse soils and the influence of associate vegetation and birds on numbers of environmental bacteria, we collected 45 samples from different soils types on the surface of the island. Total viable bacterial counts were performed with plate count at 22, 30 and 37 °C for all soils samples and the amount of organic matter and nitrogen (N) was measured. Selected samples were also tested for coliforms, faecal coliforms aerobic and anaerobic bacteria. The deep subsurface biosphere was investigated by collecting liquid subsurface samples from a 182 m borehole with a special sampler. Diversity analysis of uncultivated biota in samples was performed by 16S rRNA gene sequences analysis and cultivation. Correlation was observed between N deficits and the number of microorganisms in surface soils samples. The lowest number of bacteria (1 × 104-1 × 105 g-1) was detected in almost pure pumice but the count was significant higher (1 × 106-1 × 109 g-1) in vegetated soil or pumice with bird droppings. The number of faecal bacteria correlated also to the total number of bacteria and type of soil. Bacteria belonging to Enterobacteriaceae were only detected in vegetated and samples containing bird droppings. The human pathogens Salmonella, Campylobacter and Listeria were not in any sample. Both thermophilic bacteria and archaea 16S rDNA sequences were found in the subsurface samples collected at 145 m and 172 m depth at 80 °C and 54 °C, respectively, but no growth was observed in enrichments. The microbiota sequences generally showed low affiliation to any known 16S rRNA gene sequences.

  4. A novel typing method for Streptococcus pneumoniae using selected surface proteins

    Directory of Open Access Journals (Sweden)

    Arnau eDomenech

    2016-03-01

    Full Text Available The diverse pneumococcal diseases are associated with different pneumococcal lineages, or clonal complexes. Nevertheless, intra-clonal genomic variability, which influences pathogenicity, has been reported for surface virulence factors. These factors constitute the communication interface between the pathogen and its host and their corresponding genes are subjected to strong selective pressures affecting functionality and immunogenicity. First, the presence and allelic dispersion of 97 outer protein families were screened in 19 complete pneumococcal genomes. Seventeen families were deemed variable and were then examined in 216 draft genomes. This procedure allowed the generation of binary vectors with 17 positions and the classification of strains into surfotypes. They represent the outer protein subsets with the highest inter-strain discriminative power. A total of 116 non-redundant surfotypes were identified. Those sharing a critical number of common protein features were hierarchically clustered into 18 surfogroups. Most clonal complexes with comparable epidemiological characteristics belonged to the same or similar surfogroups. However, the very large CC156 clonal complex was dispersed over several surfogroups. In order to establish a relationship between surfogroup and pathogenicity, the surfotypes of 95 clinical isolates with different serogroup/serotype combinations were analysed. We found a significant correlation between surfogroup and type of pathogenic behaviour (primary invasive, opportunistic invasive and non-invasive. We conclude that the virulent behaviour of S. pneumoniae is related to the activity of collections of, rather than individual, surface virulence factors. Since surfotypes evolve faster than MLSTs and directly reflect virulence potential, this novel typing protocol is appropriate for the identification of emerging clones.

  5. Analysing the Effects of Different Land Cover Types on Land Surface Temperature Using Satellite Data

    Science.gov (United States)

    Şekertekin, A.; Kutoglu, Ş. H.; Kaya, S.; Marangoz, A. M.

    2015-12-01

    Monitoring Land Surface Temperature (LST) via remote sensing images is one of the most important contributions to climatology. LST is an important parameter governing the energy balance on the Earth and it also helps us to understand the behavior of urban heat islands. There are lots of algorithms to obtain LST by remote sensing techniques. The most commonly used algorithms are split-window algorithm, temperature/emissivity separation method, mono-window algorithm and single channel method. In this research, mono window algorithm was implemented to Landsat 5 TM image acquired on 28.08.2011. Besides, meteorological data such as humidity and temperature are used in the algorithm. Moreover, high resolution Geoeye-1 and Worldview-2 images acquired on 29.08.2011 and 12.07.2013 respectively were used to investigate the relationships between LST and land cover type. As a result of the analyses, area with vegetation cover has approximately 5 ºC lower temperatures than the city center and arid land., LST values change about 10 ºC in the city center because of different surface properties such as reinforced concrete construction, green zones and sandbank. The temperature around some places in thermal power plant region (ÇATES and ZETES) Çatalağzı, is about 5 ºC higher than city center. Sandbank and agricultural areas have highest temperature due to the land cover structure.

  6. ANALYSING THE EFFECTS OF DIFFERENT LAND COVER TYPES ON LAND SURFACE TEMPERATURE USING SATELLITE DATA

    Directory of Open Access Journals (Sweden)

    A. Şekertekin

    2015-12-01

    Full Text Available Monitoring Land Surface Temperature (LST via remote sensing images is one of the most important contributions to climatology. LST is an important parameter governing the energy balance on the Earth and it also helps us to understand the behavior of urban heat islands. There are lots of algorithms to obtain LST by remote sensing techniques. The most commonly used algorithms are split-window algorithm, temperature/emissivity separation method, mono-window algorithm and single channel method. In this research, mono window algorithm was implemented to Landsat 5 TM image acquired on 28.08.2011. Besides, meteorological data such as humidity and temperature are used in the algorithm. Moreover, high resolution Geoeye-1 and Worldview-2 images acquired on 29.08.2011 and 12.07.2013 respectively were used to investigate the relationships between LST and land cover type. As a result of the analyses, area with vegetation cover has approximately 5 ºC lower temperatures than the city center and arid land., LST values change about 10 ºC in the city center because of different surface properties such as reinforced concrete construction, green zones and sandbank. The temperature around some places in thermal power plant region (ÇATES and ZETES Çatalağzı, is about 5 ºC higher than city center. Sandbank and agricultural areas have highest temperature due to the land cover structure.

  7. Adeno-associated virus type 2 binding study on model heparan sulfate surface

    Science.gov (United States)

    Negishi, Atsuko; Liu, Jian; McCarty, Douglas; Samulski, Jude; Superfine, Richard

    2003-11-01

    Understanding the mechanisms involved in virus infections is useful in its application in areas such as gene therapy, drug development and delivery, and biosensors. In collaboration with UNC Gene Therapy Center and School of Pharmacy, we are specifically looking at the interaction between human parvovirus adeno-associated virus type 2 (AAV2), a potential viral vector, and heparan sulfate proteoglycan (HSPG), a known cell surface receptor for AAV2. Recent development in glycobiology has shown that some protein-polysaccharide binding is sugar sequence dependent. Heparan sulfate (HS) is a polysaccharide chain of sulfated iduronic/glucuronic and sulfate glucosamine residues and can be differentiated into sequence specific structures by enzymes. These enzymatic modifications, known as heparan sulfate sulfotransferase modified modifications, have been shown to change the biological nature of heparan sulfate such as specific binding to proteins and viruses. For understanding HS-assisted viral infection mechanisms, we are interested in investigating the binding affinity and stability of AAV to different HS structures. We have developed a model heparan sulfate surface in which AAV adsorption studies are done and analyzed using the atomic force microscope (AFM). In addition, a miniArray assay has been created to facilitate to this study. Adsorption studies are done in 4 white LED wells with approximately 3 mm2 reaction areas which minimize sample use and waste.

  8. Structural definition on the surface of Helicobacter pylori type IV secretion apparatus.

    Science.gov (United States)

    Tanaka, Jiro; Suzuki, Toshihiko; Mimuro, Hitomi; Sasakawa, Chihiro

    2003-06-01

    Genetic and functional studies have indicated that the type IV secretion system (TFSS) of Helicobacter pylori forms a secretion complex in the cell envelope that protrudes towards the outside in order to inject CagA protein into gastric epithelial cells. However, the proposed structural model is based on partial amino acid homology with the components of the Agrobacterium tumefaciens TFSS. Therefore, we undertook the identification of the structural features of the TFSS exposed on the surface of H. pylori and found that filamentous structures present on the bacterial surface are related to the secretion apparatus. Using immunofluorescence microscopy with antibodies directed to tyrosine-phosphorylated CagA (pY-CagA) and Hp0532 (VirB7) in the infection assay, pY-CagA signals were detected just below the host cell-attached bacteria, where Hp0532 (VirB7) signals were detected as co-localized, suggesting that the CagA injected into the host cell through the TFSS apparatus is still mostly confined to the areas just below the attached bacteria after being phosphorylated. Furthermore, the filamentous structures on bacterium were found to be associated with Hp0532 (VirB7) or Hp0528 (VirB9), the major components of TFSS, by immunogold electron microscopy. These results strongly suggest that the H. pylori TFSS apparatus is a filamentous macromolecular structure protruding from the bacterial envelope.

  9. Lack of a surface layer in Tannerella forsythia mutants deficient in the type IX secretion system.

    Science.gov (United States)

    Narita, Yuka; Sato, Keiko; Yukitake, Hideharu; Shoji, Mikio; Nakane, Daisuke; Nagano, Keiji; Yoshimura, Fuminobu; Naito, Mariko; Nakayama, Koji

    2014-10-01

    Tannerella forsythia, a Gram-negative anaerobic bacterium, is an important pathogen in periodontal disease. This bacterium possesses genes encoding all known components of the type IX secretion system (T9SS). T. forsythia mutants deficient in genes orthologous to the T9SS-encoding genes porK, porT and sov were constructed. All porK, porT and sov single mutants lacked the surface layer (S-layer) and expressed less-glycosylated versions of the S-layer glycoproteins TfsA and TfsB. In addition, these mutants exhibited decreased haemagglutination and increased biofilm formation. Comparison of the proteins secreted by the porK and WT strains revealed that the secretion of several proteins containing C-terminal domain (CTD)-like sequences is dependent on the porK gene. These results indicate that the T9SS is functional in T. forsythia and contributes to the translocation of CTD proteins to the cell surface or into the extracellular milieu.

  10. Chemical disinfection to interrupt transfer of rhinovirus type 14 from environmental surfaces to hands.

    Science.gov (United States)

    Sattar, S A; Jacobsen, H; Springthorpe, V S; Cusack, T M; Rubino, J R

    1993-05-01

    Rhinoviruses can survive on environmental surfaces for several hours under ambient conditions. Hands can readily become contaminated after contact with such surfaces, and self-inoculation may lead to infection. Whereas hand washing is crucial in preventing the spread of rhinovirus colds, proper disinfection of environmental surfaces may further reduce rhinovirus transmission. In this study, the capacities of Lysol Disinfectant Spray (0.1% o-phenylphenol and 79% ethanol), a domestic bleach (6% sodium hypochlorite diluted to give 800 ppm of free chlorine), a quaternary ammonium-based product (7.05% quaternary ammonium diluted 1:128 in tap water), and a phenol-based product (14.7% phenol diluted 1:256 in tap water) were compared in interrupting the transfer of rhinovirus type 14 from stainless steel disks to fingerpads of human volunteers upon a 10-s contact at a pressure of 1 kg/cm2. Ten microliters of the virus, suspended in bovine mucin (5 mg/ml), was placed on each disk, and the inoculum was dried under ambient conditions; the input number on each disk ranged from 0.5 x 10(5) to 2.1 x 10(6) PFU. The dried virus was exposed to 20 microliters of the test disinfectant. The Lysol spray was able to reduce virus infectivity by > 99.99% after a contact of either 1 or 10 min, and no detectable virus was transferred to fingerpads from Lysol-treated disks. The bleach (800 ppm of free chlorine) reduced the virus titer by 99.7% after a contact time of 10 min, and again no virus was transferred from the disks treated with it.(ABSTRACT TRUNCATED AT 250 WORDS)

  11. Land Surface Models Evaluation for Two Different Land-Cover Types: Cropland and Forest

    Directory of Open Access Journals (Sweden)

    Daeun Kim

    2016-02-01

    Full Text Available Land Surface Model (LSM is an important tool used to understand the complicated hydro-meteorological flux interaction systems between the land surface and atmosphere in hydrological cycles. Over the past few decades, LSMs have further developed to more accurately estimate weather and climate hydrological processes. Common Land Model (CLM and Noah Land Surface Model (Noah LSM are used in this paper to estimate the hydro-meteorological fluxes for model applicability assessment at two different flux tower sites in Korea during the summer monsoon season. The estimated fluxes such as net radiation (RN, sensible heat flux (H, latent heat flux (LE, ground heat flux (G, and soil temperature (Ts were compared with the observed data from flux towers. The simulated RN from both models corresponded well with the in situ data. The root-mean-square error (RMSE values were 39 - 44 W m-2 for the CLM and 45 - 50 W m-2 for the Noah LSM while the H and LE showed relatively larger discrepancies with each observation. The estimated Ts from the CLM corresponded comparatively well with the observed soil temperature. The CLM estimations generally showed better statistical results than those from the Noah LSM, even though the estimated hydro-meteorological fluxes from both models corresponded reasonably with the observations. A sensitivity test indicated that differences according to different locations between the estimations from models and observations were caused by field conditions including the land-cover type and soil texture. In addition the estimated RN, H, LE, and G were more sensitive than the estimated Ts in both models.

  12. ABO Blood-Typing Using an Antibody Array Technique Based on Surface Plasmon Resonance Imaging

    Science.gov (United States)

    Houngkamhang, Nongluck; Vongsakulyanon, Apirom; Peungthum, Patjaree; Sudprasert, Krisda; Kitpoka, Pimpun; Kunakorn, Mongkol; Sutapun, Boonsong; Amarit, Ratthasart; Somboonkaew, Armote; Srikhirin, Toemsak

    2013-01-01

    In this study, readily available antibodies that are used in standard agglutination tests were evaluated for their use in ABO blood typing by a surface plasmon resonance imaging (SPR imaging) technique. Five groups of antibodies, including mixed clones of anti-A, anti-B, and anti-AB, and single clones of anti-A and anti-B, were used to construct the five-line detection arrays using a multichannel flow cell in the SPR imager. The red blood cell (RBC) samples were applied to a multichannel flow cell that was orthogonal to the detection line arrays for blood group typing. We found that the blood samples were correctly grouped in less than 12 min by the SPR imaging technique, and the results were consistent with those of the standard agglutination technique for all 60 samples. We found that mixed clones of antibodies provided 33%–68% greater change in the SPR signal than the single-clone antibodies. Applying the SPR imaging technique using readily available antibodies may reduce the costs of the antibodies, shorten the measurement time, and increase the throughput. PMID:24021965

  13. Two Dimensional Array of Piezoresistive Nanomechanical Membrane-Type Surface Stress Sensor (MSS with Improved Sensitivity

    Directory of Open Access Journals (Sweden)

    Nico F. de Rooij

    2012-11-01

    Full Text Available We present a new generation of piezoresistive nanomechanical Membrane-type Surface stress Sensor (MSS chips, which consist of a two dimensional array of MSS on a single chip. The implementation of several optimization techniques in the design and microfabrication improved the piezoresistive sensitivity by 3~4 times compared to the first generation MSS chip, resulting in a sensitivity about ~100 times better than a standard cantilever-type sensor and a few times better than optical read-out methods in terms of experimental signal-to-noise ratio. Since the integrated piezoresistive read-out of the MSS can meet practical requirements, such as compactness and not requiring bulky and expensive peripheral devices, the MSS is a promising transducer for nanomechanical sensing in the rapidly growing application fields in medicine, biology, security, and the environment. Specifically, its system compactness due to the integrated piezoresistive sensing makes the MSS concept attractive for the instruments used in mobile applications. In addition, the MSS can operate in opaque liquids, such as blood, where optical read-out techniques cannot be applied.

  14. Surface modifications caused by a swift heavy ion irradiation on crystalline p-type gallium antimonide

    Energy Technology Data Exchange (ETDEWEB)

    Jadhav, Vidya, E-mail: vj1510@yahoo.com

    2015-09-01

    Surface modifications caused by a swift heavy ion irradiation on crystalline p-type gallium antimonide crystal have been reported. Single crystal, 1 0 0〉 orientations and ∼500 μm thick p-type GaSb samples with carrier concentration of 3.30 × 10{sup 17} cm{sup −3} were irradiated at 100 MeV Fe{sup 7+} ions. We have used 15UD Pelletron facilities at IUAC with varying fluences of 5 × 10{sup 10}–1 × 10{sup 14} ions cm{sup −2}. The effects of irradiation on these samples have been investigated using, spectroscopic ellipsometry, atomic force microscopy and ultraviolet–visible–NIR spectroscopy techniques. Ellipsometry parameters, psi (Ψ) and delta (Δ) for the unirradiated sample and samples irradiated with different fluences were recorded. The data were fit to a three phase model to determine the refractive index and extinction coefficient. The refractive index and extinction coefficient for various fluences in ultraviolet, visible, and infrared, regimes were evaluated. Atomic force microscopy has been used to study these surface modifications. In order to have more statistical information about the surface, we have plotted the height structure histogram for all the samples. For unirradiated sample, we observed the Gaussian fitting. This result indicates the more ordered height structure symmetry. Whereas for the sample irradiated with the fluence of 1 × 10{sup 13}, 5 × 10{sup 13} and 1 × 10{sup 14} ions cm{sup −2}, we observed the scattered data. The width of the histogram for samples irradiated up to the fluence of 1 × 10{sup 13} ion cm{sup −2} was found to be almost same however it decreased at higher fluence. UV reflectance spectra of the sample irradiated with increasing fluences exhibit three peaks at 292, 500 and 617 nm represent the high energy GaSb; E{sub 1}, E{sub 1} + Δ and E{sub 2} band gaps in all irradiated samples.

  15. Typhoon generated surface gravity waves measured by NOMAD-type buoys

    Science.gov (United States)

    Collins, Clarence O., III

    This study examines wind-generated ocean surface waves as measured by NOMAD-type buoys during the ONR-sponsored Impact of Typhoons on the Ocean in the Pacific (ITOP) field experiment in 2010. 1-D measurements from two new Extreme Air-Sea Interaction (EASI) NOMAD-type buoys were validated against measurements from established Air-Sea Interaction Spar (ASIS) buoys. Also, during ITOP, 3 drifting Miniature Wave Buoys, a wave measuring marine radar on the R/V Roger Revelle, and several overpasses of JASON-1 (C- and Ku-band) and -2 (Ku-band) satellite altimeters were within 100 km of either EASI buoy. These additional measurements were compared against both EASI buoys. Findings are in line with previous wave parameter inter-comparisons. A corroborated measurement of mean wave direction and direction at the peak of the spectrum from the EASI buoy is presented. Consequently, this study is the first published account of directional wave information which has been successfully gathered from a buoy with a 6 m NOMAD-type hull. This result may be applied to improve operational coverage of wave direction. In addition, details for giving a consistent estimate of sea surface elevation from buoys using strapped down accelerometers are given. This was found to be particularly important for accurate measurement of extreme waves. These technical studies established a high level of confidence in the ITOP wave measurements. Detailed frequency-direction spectra were analyzed. Structures in the wave field were described during the close passages of 4 major tropical cyclones (TC) including: severe tropical storm Dianmu, Typhoon Fanapi, Super Typhoon Megi, and Typhoon Chaba. In addition, significant swell was measured from a distant 5th TC, Typhoon Malakas. Changes in storm direction and intensity are found to have a profound impact on the wave field. Measurements of extreme waves were explored. More extreme waves were measured during TCs which coincided with times of increased wave

  16. Outcome of contralateral C7 nerve transferring to median nerve

    Institute of Scientific and Technical Information of China (English)

    GAO Kai-ming; LAO Jie; ZHAO Xin; GU Yu-dong

    2013-01-01

    Background Contralateral C7 (cC7) transfer had been widely used in many organizations in the world,but the outcomes were significantly different.So the purpose of the study was to evaluate the outcome of patients treated with cC7 transferring to median nerve and to determine the factors affecting the outcome of this procedure.Methods A retrospective review of 51 patients with total root avulsion brachial plexus injuries who underwent cC7 transfer was conducted.All of the surgeries were performed with two surgery stages and median nerve was the recipient nerve.The cC7 nerve was used in three different ways.The entire C7 root was used in 11 patients; the posterior division together with the lateral part of the anterior division was used in 15 patients; the anterior or the posterior division alone was used in 25 patients.The mean follow-up period was 6.9 years.Results The efficiency of the surgery in these 51 patients was 49.02% in motor and 62.75% in sensory function.The patients with entire C7 root transfer obtained significantly better recovery in both motor and sensory function than the patients with partial C7 transfer.The best function recovery could be induced if the interval between the two surgery stages was 4-8 months.Conclusions cC7 transfer is an effective procedure in repairing median nerve.But using the entire C7 root transfer can obtain better recovery; so we emphasize using the entire root as the donor.The optimal interval between two surgery stages is 4-8 months.

  17. Quadratic Assignment of Hubs in p-Hub Median Problem

    DEFF Research Database (Denmark)

    Gelareh, Shahin

    We introduce Generalized p-Hub Median Problem (GpHMP) that seeks to locate p hub nodes and install p distinct hub facilities/operators on the hubs while discount factor resulted by consolidation of flow on the hub links depends on the facilities/operators that are installed/operating on both hub...... nodes end-point. In contrast, in traditional hub location problems it is commonly assumed that all the hub facilities share a similar characteristic and economy of scale resulted by consolidation of flow over hub edges is not directly relevant to the hub facilities being installed at both end...

  18. The p-median Facility Location Problem and Solution Approaches

    Directory of Open Access Journals (Sweden)

    Mehmet BASTI

    2012-05-01

    Full Text Available In today’s globalized and increasingly competitive environment, organizations’ need to implement successful strategies for supply chain management has become indispensable. Transportation costs within the supply chain comprise an important part of the organizations’ expenses. For this reason, the strategic selection of location is an issue that directly affects supply chain performance and costs. At this stage, it becomes very important to apply the latest and the best methods to the facility location problem. The focus of this study is the p-median problem and its solution techniques, one of the location allocation problems aimed at minimizing the costs arising from shipments between facilities and demand points.

  19. Superhydrophobic aluminium-based surfaces: Wetting and wear properties of different CVD-generated coating types

    Energy Technology Data Exchange (ETDEWEB)

    Thieme, M., E-mail: michael.thieme@tu-dresden.de [Technische Universität Dresden, Institute of Materials Science, 01062 Dresden (Germany); Streller, F., E-mail: streller@seas.upenn.edu [Technische Universität Dresden, Institute of Materials Science, 01062 Dresden (Germany); Simon, F., E-mail: frsimon@ipfdd.de [Leibniz-Institut für Polymerforschung Dresden, Postfach 120 411, 01005 Dresden (Germany); Frenzel, R., E-mail: frenzelr@ipfdd.de [Leibniz-Institut für Polymerforschung Dresden, Postfach 120 411, 01005 Dresden (Germany); White, A.J. [GVD Corporation, 45 Spinelli Place, Cambridge, MA 02138 (United States)

    2013-10-15

    In view of generating superhydrophobic aluminium-based surfaces, this work presents further results for the combination of anodic oxidation as the primary pretreatment method and chemical vapour deposition (CVD) variants for chemical modification producing coatings of 250–1000 nm thickness. In detail, CVD involved the utilisation of i – hexafluoropropylene oxide as precursor within the hot filament CVD process for the deposition of poly(tetrafluoroethylene) coatings at alternative conditions (PTFE-AC) and ii – 1,3,5-trivinyltrimethylcyclotrisiloxane for the deposition of polysiloxane coatings (PSi) by initiated CVD. The substrate material was Al Mg1 subjected to usual or intensified sulphuric acid anodisation pretreatments (SAAu, SAAi, respectively) affording various degrees of surface micro-roughness (SAAu < SAAi) to the oxidic layers. Performance characteristics were evaluated in the original as-coated states and after standardised artificial weathering and/or mild wear testing. Superhydrophobicity (SH) was observed with the system SAAi + PTFE-AC similarly to former findings with the standard hot filament CVD PTFE coating variant (SAAi + PTFE-SC). The results indicated that the specific coating morphology made an important contribution to the water-repellency, because even some of the SAAu-based samples tended to reveal SH. Subjecting samples to weathering treatment resulted in a general worsening of the wetting behaviour, primarily limited to the receding contact angles. These tendencies were correlated with the chemical composition of the sample surfaces as analysed by X-ray photoelectron spectroscopy. The wear tests showed, as evaluated by scanning electron microscopy and contact angle measurement, that the PTFE coatings were relatively sensitive to friction. This was connected with a dramatic deterioration of the water-repelling properties. PSi-coated surfaces generally showed rather poor water-repellency, but this coating type was surprisingly

  20. Surface structure and energy of B2 type intermetallic compound NiAl

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Jianmin [College of Physics and Information Technology, Shaanxi Normal University, Xian 710062, Shaanxi (China)], E-mail: jianm_zhang@yahoo.com; Wang Doudou [College of Physics and Information Technology, Shaanxi Normal University, Xian 710062, Shaanxi (China); Institute of Telecommunication Engineering of the Air Force Engineering University (AFEU1), Xian 710077, Shaanxi (China); Chen Guoxiang [School of Science, Xian Shiyou University, Xian 710065, Shaanxi (China); Xu Kewei [State Key Laboratory for Mechanical Behavior of Materials, Xian Jiaotong University, Xian 710049, Shaanxi (China)

    2008-02-15

    The surface structure and energies for 22 surfaces of NiAl, an ordered intermetallic compound of B2 structure, have been studied by using embedded atom method. The results show that, for alternating Ni and Al surfaces with odd numbers of the sum of their three Miller indices, the energy difference between the Ni terminated surface and Al terminated surface increase linearly with increasing the interlayer distance. So from surface energy minimization, the Al terminated surface is favorable for each alternating Ni and Al surface. This is in agreement with experimental results. However, the energy of the (1 1 0) surface belonged to the other kind of the surface consisted of stoichiometric atomic layers and with even numbers of the sum of their three Miller indices, is the lowest in all two kinds of the surfaces. Therefore the (1 1 0) texture of NiAl appears mostly in the experiments.

  1. Speckled lentiginous nevus syndrome with median nerve paresis: A rare syndrome with a new association

    Directory of Open Access Journals (Sweden)

    Vibhu Mendiratta

    2013-01-01

    Full Text Available Speckled lentiginous nevus (SLN represents a mosaic phenotype which consists of café au lait macule superimposed by melanocytic nevi. Recently, SLN syndrome has been characterized where ipsilateral neurological abnormalities have been reported in association with SLN with papular type of melanocytic nevi only. This case describes the presence of ipsilateral thenar muscle atrophy with median nerve paresis in nevus spilus which had melanocytic nevi of the macular type alone, thus delineating a new association in SLN syndrome, hitherto unreported.

  2. Radiographic signs of open median sternotomy in neonates and infants

    Energy Technology Data Exchange (ETDEWEB)

    Wu, George [Children' s Hospital of Philadelphia, Department of Radiology, Philadelphia, PA (United States); Geisinger Medical Center, Danville, PA (United States); Jaimes, Camilo; Markowitz, Richard I. [Children' s Hospital of Philadelphia, Department of Radiology, Philadelphia, PA (United States); Gaynor, J.W. [The Children' s Hospital of Philadelphia, Department of Surgery, Philadelphia, PA (United States)

    2012-06-15

    Leaving the median sternotomy wound open following cardiac surgery is employed to avoid cardiovascular compression. Horizontal struts can be used. Radiologists interpreting portable radiographs might be unaware of the open median sternotomy (OMS). To describe the frequency of radiographic signs of OMS and to increase awareness among radiologists to prevent misdiagnosis of pneumothorax and pneumomediastinum. Radiographs of 41 infants (17 girls/24 boys) with OMS were studied (age range 2 days to 8 months, mean 33 days). Central lucency and sternal edges were noted. Interclavicular distances before and after sternotomy were compared. Central lucency was seen in 25/41 (61%) children. Sternal struts were apparent in 27 (66%). In 14 without struts, central lucency was present in 8 (57%). In 27 children with struts, central lucency was present in 17 (63%) and absent in 10 (37%). Split sternal centers were identified in 6/41 (15%). The mean interclavicular distance was 23.5 mm (SD = 4.39) before sternotomy and 38.2 mm (SD = 7.0 mm) after sternotomy (P < 0.001). OMS has characteristic signs in the majority of cases. Recognition of these findings is useful and can prevent misinterpretation. (orig.)

  3. Sequential Metastatic Breast Cancer Chemotherapy:Should the Median be the Message?

    Directory of Open Access Journals (Sweden)

    Su Yon eJung

    2013-11-01

    Full Text Available Background: Counseling and anticipatory guidance of the expected course of treatment for women newly diagnosed with metastatic breast cancer (MBC are difficult due to multiple factors influencing survival following metastatic breast cancer therapy. In order to better tailor counseling at the onset and through the duration of metastatic breast cancer we used non-clinical trial data to better characterize real life experience of sequential metastatic breast cancer treatment. We examined the following aims:1. What demographic and tumor characteristics are predictive of survival in metastatic breast cancer?2. What is the median duration of each sequential chemotherapy regimen and subsequent survival of women following each sequence of chemotherapy regimen in metastatic breast cancer?Methods: Retrospective study included 792 women diagnosed from January 1999 through December 2009 at the University of Pittsburgh Cancer Institute Breast Cancer Program.Results: Median duration of sequential chemotherapy regimen and median survival from completion of sequence of chemotherapy regimens were relatively short with a wide range of treatment duration and survival. Characteristics for poor survival included hormone status, human epidermal growth factor receptor-2 (HER 2/neu status, and increased number and type of metastatic sites. Women who took more than the second sequential chemotherapy regimens had no more than median 3 months of treatment duration and 6 months survival from treatment termination.Discussion: Median clinical response and survival shorten with sequential chemotherapy regimen but with wide ranges. The rare clinical response of the minority should not set the standard for treatment expectations. All cancer clinicians, including oncology nurses, must ensure that patients are receiving tailored counseling regarding their specific risks and benefits for sequential metastatic breast cancer chemotherapy.

  4. MEDIAN PARAPETELLAR VERSUS MIDVASTUS APPROACH ON THE OUTCOMES IN TOTAL KNEE REPLACEMENT

    Directory of Open Access Journals (Sweden)

    Gokarakonda Sree Vamsi

    2015-02-01

    Full Text Available Background: The most common approaches used in Total Knee Replacement surgery are Midvastus, subvastus, median parapetellar, lateral patellar and trivector approach. There is uncertainty as to the best surgical approach to the knee joint for knee replacement. Median parapetellar approach is the standard of practice, but off late quadriceps sparing approaches as like subvastus and midvastus are performed. Subvastus approach has its own limitation of less joint exposure. In our clinical setup, orthopaedic surgeons perform median parapetellar and midvastus approach. The present study has compared outcome of knee function between a standard median parapetellar arthrotomy and mid vastus arthrotomy for patients undergone primary total knee arthroplasty. The post op quadriceps function depend on the type of surgical approach Materials and methods: 30 subjects were recruited who had undergone Total knee arthroplasty with Median parapetellar and Midvastus approach at Sri Ramachandra medical hospital; received standard physiotherapy care. The pre-op and post quadriceps angle were measured and the quadriceps, hamstrings isometric muscle strength and 6 minute walk test of the patients were recorded at the time of discharge and after one month of follow-up, and the data were statistically analyzed. Results: Median parapetellar and Midvastus approach were significant within the groups; with respect to quadriceps angle (QA (p<0.05, isometric strength of quadriceps (QS (p<0.05 and 6 minute walk test (WT (p<0.05. On comparing between the groups at one month follow-up isometric strength of hamstrings (HS (p<0.01 and 6 minute walk test (p<0.01 were found to be significant. Discussion: Findings show that Mid-vastus approach provides better results in terms of quadriceps angle, isometric strength of quadriceps and 6 minute walk test compared to median parapetellar approach. Conclusion: Study concludes that, the isometric strength of quadriceps and hamstrings has

  5. Percentiles of the run-length distribution of the Exponentially Weighted Moving Average (EWMA) median chart

    Science.gov (United States)

    Tan, K. L.; Chong, Z. L.; Khoo, M. B. C.; Teoh, W. L.; Teh, S. Y.

    2017-09-01

    Quality control is crucial in a wide variety of fields, as it can help to satisfy customers’ needs and requirements by enhancing and improving the products and services to a superior quality level. The EWMA median chart was proposed as a useful alternative to the EWMA \\bar{X} chart because the median-type chart is robust against contamination, outliers or small deviation from the normality assumption compared to the traditional \\bar{X}-type chart. To provide a complete understanding of the run-length distribution, the percentiles of the run-length distribution should be investigated rather than depending solely on the average run length (ARL) performance measure. This is because interpretation depending on the ARL alone can be misleading, as the process mean shifts change according to the skewness and shape of the run-length distribution, varying from almost symmetric when the magnitude of the mean shift is large, to highly right-skewed when the process is in-control (IC) or slightly out-of-control (OOC). Before computing the percentiles of the run-length distribution, optimal parameters of the EWMA median chart will be obtained by minimizing the OOC ARL, while retaining the IC ARL at a desired value.

  6. Synoptic relationships between surface Chlorophyll-a and diagnostic pigments specific to phytoplankton functional types

    Directory of Open Access Journals (Sweden)

    M. Noguchi-Aita

    2011-02-01

    Full Text Available Error-quantified, synoptic-scale relationships between chlorophyll-a (Chl-a and phytoplankton pigment groups at the sea surface are presented. A total of ten pigment groups were considered to represent three Phytoplankton Size Classes (PSCs, micro-, nano- and picoplankton and seven Phytoplankton Functional Types (PFTs, i.e. diatoms, dinoflagellates, green algae, prymnesiophytes (haptophytes, pico-eukaryotes, prokaryotes and Prochlorococcus sp.. The observed relationships between Chl-a and PSCs/PFTs were well-defined at the global scale to show that a community shift of phytoplankton at the basin and global scales is reflected by a change in Chl-a of the total community. Thus, Chl-a of the total community can be used as an index of not only phytoplankton biomass but also of their community structure. Within these relationships, we also found non-monotonic variations with Chl-a for certain pico-sized phytoplankton (pico-eukaryotes, Prokaryotes and Prochlorococcus sp. and nano-sized phytoplankton (Green algae, prymnesiophytes. The relationships were quantified with a least-square fitting approach in order to enable an estimation of the PFTs from Chl-a where PFTs are expressed as a percentage of the total Chl-a. The estimated uncertainty of the relationships depends on both PFT and Chl-a concentration. Maximum uncertainty of 31.8% was found for diatoms at Chl-a = 0.49 mg m−3. However, the mean uncertainty of the relationships over all PFTs was 5.9% over the entire Chl-a range observed in situ (0.02 < Chl-a < 4.26 mg m−3. The relationships were applied to SeaWiFS satellite Chl-a data from 1998 to 2009 to show the global climatological fields of the surface distribution of PFTs. Results show that microplankton are present in the mid and high latitudes, constituting only ~10.9% of the entire phytoplankton community in the mean field for 1998–2009, in which diatoms explain ~7.5%. Nanoplankton are ubiquitous throughout the global surface oceans

  7. Preparation of Thin Melanin-Type Films by Surface-Controlled Oxidation.

    Science.gov (United States)

    Salomäki, Mikko; Tupala, Matti; Parviainen, Timo; Leiro, Jarkko; Karonen, Maarit; Lukkari, Jukka

    2016-04-26

    The preparation of thin melanin films suitable for applications is challenging. In this work, we present a new alternative approach to thin melanin-type films using oxidative multilayers prepared by the sequential layer-by-layer deposition of cerium(IV) and inorganic polyphosphate. The interfacial reaction between cerium(IV) in the multilayer and 5,6-dihydroxyindole (DHI) in the adjacent aqueous solution leads to the formation of a thin uniform film. The oxidation of DHI by cerium(IV) proceeds via known melanin intermediates. We have characterized the formed DHI-melanin films using scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), UV-vis spectroscopy, and spectroelectrochemistry. When a five-bilayer oxidative multilayer is used, the film is uniform with a thickness of ca. 10 nm. Its chemical composition, as determined using XPS, is typical for melanin. It is also redox active, and its oxidation occurs in two steps, which can be assigned to semiquinone and quinone formation within the indole structural motif. Oxidative multilayers can also oxidize dopamine, but the reaction stops at the dopamine quinone stage because of the limited amount of the multilayer-based oxidizing agent. However, dopamine oxidation by Ce(IV) was studied also in solution by UV-vis spectroscopy and mass spectrometry in order to verify the reaction mechanism and the final product. In solution, the oxidation of dopamine by cerium shows that the indole ring formation takes place already at low pH and that the mass spectrum of the final product is practically identical with that of commercial melanin. Therefore, layer-by-layer formed oxidative multilayers can be used to deposit functional melanin-type thin films on arbitrary substrates by a surface-controlled reaction.

  8. Performance Optimization of Cold Rolled Type 316L Stainless Steel by Sand Blasting and Surface Linishing Treatment

    Science.gov (United States)

    Krawczyk, B.; Heine, B.; Engelberg, D. L.

    2016-03-01

    Sand blasting followed by a surface linishing treatment was applied to optimize the near-surface microstructure of cold rolled type 316L stainless steel. The introduction of cold rolling led to the formation of α-martensite. Specimens with large thickness reductions (40, 53%) were more susceptible to localized corrosion. The application of sand blasting produced a near-surface deformation layer containing compressive residual stresses with significantly increased surface roughness, resulting in reduced corrosion resistance. The most resistant microstructure was obtained with the application of a final linishing treatment after sand blasting. This treatment produced microstructures with compressive near-surface residual stresses, reduced surface roughness, and increased resistance to localized corrosion.

  9. Sabellariidae from Lizard Island, Great Barrier Reef, including a new species of Lygdamis and notes on external morphology of the median organ.

    Science.gov (United States)

    Capa, María; Faroni-Perez, Larisse; Hutchings, Pat

    2015-09-18

    We document herein the occurrence of three species of Sabellariidae at Lizard Island, Great Barrier Reef, including a new Lygdamis species. Sabellaria lungalla, described from Northern Territory, is reported for Queensland for the first time. The genus Gesaia, represented by a planktonic larva collected in shallow waters of the Archipelago, is a new record for Australia. Lygdamis nasutus n. sp. is characterised by one of the most conspicuous median organ described in the family (cylindrical, distally pigmented and is provided with a flattened, teardrop corona), its paleae morphology (with straight paleae, outer ones with asymmetrical pointed tips and subtle thecal sculpture and inner paleae with blunt tips and smooth surface), three lateral lobes on chaetiger 2, abdominal chaetigers with two type of neurochaetae, and notopodial uncini with 1-4 longitudinal rows of teeth. Comparison of the external morphology of the medial organ and median ridge of several species has been undertaken. Even though its function remains uncertain, the median organ morphology seems species specific and may provide relevant information about the evolutionary history and adaptations of sabellariids.

  10. Evaluation of Three Swabbing Devices for Detection of Listeria monocytogenes on Different Types of Food Contact Surfaces

    Directory of Open Access Journals (Sweden)

    Evy Lahou

    2014-01-01

    Full Text Available Listeria monocytogenes can adhere to different types of food contact surfaces within a food processing environment. Therefore, environmental sampling devices should be capable of detecting unacceptable contamination. In this study, a sponge-stick, foam spatula and an environmental swab were evaluated on their ability to detect low concentrations of L. monocytogenes on different types of food contact surfaces. A cocktail of four L. monocytogenes serotypes was inoculated with a concentration of 100 CFU/250 cm2 onto stainless steel (SS, high density polyethylene (HDPE and rubber surfaces in a 250 cm2 area. Immediately after inoculation and after 1 h exposure, the surfaces were swabbed with the different swabbing devices. The results of the study show only minor differences in the ability of the swabbing devices to detect L. monocytogenes. All devices were capable to detect the contamination immediately after inoculation. However, when the surfaces were allowed to air-dry for 1 h, L. monocytogenes was undetected in 11.1% of the samples (n = 27 with the sponge stick, in 7.4% of the samples (n = 27 with the foam spatula and in 3.7% of the samples (n = 27 with the environmental swab, especially on SS surfaces. The detection ability of the different devices for L. monocytogenes can be concluded to be rather high on different types of food contact surfaces.

  11. Surface modification of nanofibrous polycaprolactone/gelatin composite scaffold by collagen type I grafting for skin tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Gautam, Sneh [Department of Polymer and Process Engineering, Indian Institute of Technology Roorkee (India); Chou, Chia-Fu [Institute of Physics, Academia Sinica, Taipei, Taiwan (China); Dinda, Amit K. [Department of Pathology, All India Institute of Medical Science, New Delhi (India); Potdar, Pravin D. [Department of Molecular Medicine and Biology, Jaslok Hospital and Research Centre, Mumbai (India); Mishra, Narayan C., E-mail: mishrawise@gmail.com [Department of Polymer and Process Engineering, Indian Institute of Technology Roorkee (India)

    2014-01-01

    In the present study, a tri-polymer polycaprolactone (PCL)/gelatin/collagen type I composite nanofibrous scaffold has been fabricated by electrospinning for skin tissue engineering and wound healing applications. Firstly, PCL/gelatin nanofibrous scaffold was fabricated by electrospinning using a low cost solvent mixture [chloroform/methanol for PCL and acetic acid (80% v/v) for gelatin], and then the nanofibrous PCL/gelatin scaffold was modified by collagen type I (0.2–1.5 wt.%) grafting. Morphology of the collagen type I-modified PCL/gelatin composite scaffold that was analyzed by field emission scanning electron microscopy (FE-SEM), showed that the fiber diameter was increased and pore size was decreased by increasing the concentration of collagen type I. Fourier transform infrared (FT-IR) spectroscopy and thermogravimetric (TG) analysis indicated the surface modification of PCL/gelatin scaffold by collagen type I immobilization on the surface of the scaffold. MTT assay demonstrated the viability and high proliferation rate of L929 mouse fibroblast cells on the collagen type I-modified composite scaffold. FE-SEM analysis of cell-scaffold construct illustrated the cell adhesion of L929 mouse fibroblasts on the surface of scaffold. Characteristic cell morphology of L929 was also observed on the nanofiber mesh of the collagen type I-modified scaffold. Above results suggest that the collagen type I-modified PCL/gelatin scaffold was successful in maintaining characteristic shape of fibroblasts, besides good cell proliferation. Therefore, the fibroblast seeded PCL/gelatin/collagen type I composite nanofibrous scaffold might be a potential candidate for wound healing and skin tissue engineering applications. - Highlights: • PCL/gelatin/collagen type I scaffold was fabricated for skin tissue engineering. • PCL/gelatin/collagen type I scaffold showed higher fibroblast growth than PCL/gelatin one. • PCL/gelatin/collagen type I might be one of the ideal scaffold for

  12. Recursive estimation of the conditional geometric median in Hilbert spaces

    CERN Document Server

    Cardot, Hervé; Zitt, Pierre-André

    2012-01-01

    A recursive estimator of the conditional geometric median in Hilbert spaces is studied. It is based on a stochastic gradient algorithm whose aim is to minimize a weighted L1 criterion and is consequently well adapted for robust online estimation. The weights are controlled by a kernel function and an associated bandwidth. Almost sure convergence and L2 rates of convergence are proved under general conditions on the conditional distribution as well as the sequence of descent steps of the algorithm and the sequence of bandwidths. Asymptotic normality is also proved for the averaged version of the algorithm with an optimal rate of convergence. A simulation study confirms the interest of this new and fast algorithm when the sample sizes are large. Finally, the ability of these recursive algorithms to deal with very high-dimensional data is illustrated on the robust estimation of television audience profiles conditional on the total time spent watching television over a period of 24 hours.

  13. Soil and surface layer type affect non-rainfall water inputs

    Science.gov (United States)

    Agam, Nurit; Berliner, Pedro; Jiang, Anxia

    2017-04-01

    Non-rainfall water inputs (NRWIs), which include fog deposition, dew formation, and direct water vapor adsorption by the soil, play a vital role in arid and semiarid regions. Environmental conditions, namely radiation, air temperature, air humidity, and wind speed, largely affect the water cycle driven by NRWIs. The substrate type (soil type and the existence/absence of a crust layer) may as well play a major role. Our objective was to quantify the effects of soil type (loess vs. sand) and surface layer (bare vs. crusted) on the gain and posterior evaporation of NRWIs in the Negev Highlands throughout the dry summer season. Four undisturbed soil samples (20 cm diameter and 50 cm depth) were excavated and simultaneously introduced into a PVC tube. Two samples were obtained in the Negev's Boker plain (loess soil) and two in the Nizzana sand dunes in the Western Negev. On one sample from each site the crust was removed while on the remaining one the natural crust was left in place. The samples were brought to the research site at the Jacob Bluestein Institutes for Desert Research, Ben-Gurion University of the Negev, Israel (31˚08' N, 34˚53' E, 400 meter above the sea level) where they were exposed to the same environmental conditions. The four samples in their PVC tubes were placed on top of scales and the samples mass was continuously monitored. Soil temperatures were monitored at depths of 1, 2, 3, 5 and10 cm in each microlysimeter (ML) using Copper-Constantan thermocouples. The results of particle size distribution indicated that the crust of the loess soil is probably a physical crust, i.e., a crust that forms due to raindroplets impact; while the crust on the sand soil is biological. On most days, the loess soils adsorbed more water than their corresponding sand soil samples. For both soils, the samples for which the crust was removed adsorbed more water than the samples for which it was intact. The difference in daily water adsorption amount between crusted

  14. Effect of nitrogen-rich cell culture surfaces on type X collagen expression by bovine growth plate chondrocytes

    Science.gov (United States)

    2011-01-01

    Background Recent evidence indicates that osteoarthritis (OA) may be a systemic disease since mesenchymal stem cells (MSCs) from OA patients express type X collagen, a marker of late stage chondrocyte hypertrophy (associated with endochondral ossification). We recently showed that the expression of type X collagen was suppressed when MSCs from OA patients were cultured on nitrogen (N)-rich plasma polymer layers, which we call "PPE:N" (N-doped plasma-polymerized ethylene, containing up to 36 atomic percentage (at.% ) of N. Methods In the present study, we examined the expression of type X collagen in fetal bovine growth plate chondrocytes (containing hypertrophic chondrocytes) cultured on PPE:N. We also studied the effect of PPE:N on the expression of matrix molecules such as type II collagen and aggrecan, as well as on proteases (matrix metalloproteinase-13 (MMP-13) and molecules implicated in cell division (cyclin B2). Two other culture surfaces, "hydrophilic" polystyrene (PS, regular culture dishes) and nitrogen-containing cation polystyrene (Primaria®), were also investigated for comparison. Results Results showed that type X collagen mRNA levels were suppressed when cultured for 4 days on PPE:N, suggesting that type X collagen is regulated similarly in hypertrophic chondrocytes and in human MSCs from OA patients. However, the levels of type X collagen mRNA almost returned to control value after 20 days in culture on these surfaces. Culture on the various surfaces had no significant effects on type II collagen, aggrecan, MMP-13, and cyclin B2 mRNA levels. Conclusion Hypertrophy is diminished by culturing growth plate chondrocytes on nitrogen-rich surfaces, a mechanism that is beneficial for MSC chondrogenesis. Furthermore, one major advantage of such "intelligent surfaces" over recombinant growth factors for tissue engineering and cartilage repair is potentially large cost-saving. PMID:21244651

  15. Characterizing a New Surface-Based Shortwave Cloud Retrieval Technique, Based on Transmitted Radiance for Soil and Vegetated Surface Types

    Directory of Open Access Journals (Sweden)

    Patrick J. McBride

    2013-03-01

    Full Text Available This paper presents an approach using the GEneralized Nonlinear Retrieval Analysis (GENRA tool and general inverse theory diagnostics including the maximum likelihood solution and the Shannon information content to investigate the performance of a new spectral technique for the retrieval of cloud optical properties from surface based transmittance measurements. The cumulative retrieval information over broad ranges in cloud optical thickness (τ, droplet effective radius (re, and overhead sun angles is quantified under two conditions known to impact transmitted radiation; the variability in land surface albedo and atmospheric water vapor content. Our conclusions are: (1 the retrieved cloud properties are more sensitive to the natural variability in land surface albedo than to water vapor content; (2 the new spectral technique is more accurate (but still imprecise than a standard approach, in particular for τ between 5 and 60 and re less than approximately 20 μm; and (3 the retrieved cloud properties are dependent on sun angle for clouds of  from 5 to 10 and re < 10 μm, with maximum sensitivity obtained for an overhead sun.

  16. Characterizing a New Surface-Based Shortwave Cloud Retrieval Technique, Based on Transmitted Radiance for Soil and Vegetated Surface Types

    Science.gov (United States)

    Coddington, Odele; Pilewskie, Peter; Schmidt, K. Sebastian; McBride, Patrick J.; Vukicevic, Tomislava

    2013-01-01

    This paper presents an approach using the GEneralized Nonlinear Retrieval Analysis (GENRA) tool and general inverse theory diagnostics including the maximum likelihood solution and the Shannon information content to investigate the performance of a new spectral technique for the retrieval of cloud optical properties from surface based transmittance measurements. The cumulative retrieval information over broad ranges in cloud optical thickness (tau), droplet effective radius (r(sub e)), and overhead sun angles is quantified under two conditions known to impact transmitted radiation; the variability in land surface albedo and atmospheric water vapor content. Our conclusions are: (1) the retrieved cloud properties are more sensitive to the natural variability in land surface albedo than to water vapor content; (2) the new spectral technique is more accurate (but still imprecise) than a standard approach, in particular for tau between 5 and 60 and r(sub e) less than approximately 20 nm; and (3) the retrieved cloud properties are dependent on sun angle for clouds of tau from 5 to 10 and r(sub e) less than 10 nm, with maximum sensitivity obtained for an overhead sun.

  17. Transmission-type SPR sensor based on coupling of surface plasmons to radiation modes using a dielectric grating

    Institute of Scientific and Technical Information of China (English)

    Changkui HU; Deming LIU

    2009-01-01

    A transmission-type surface plasmon resonance (SPR) sensor is presented. In the transmission-type SPR structure, surface plasmon waves are outcoupled to radia-tion modes by the use of dielectric grating on a thin-film layer of Ag. Compared with the traditional reflection-type SPR sensor, the new method provides larger detectable range, which might be useful to investigate thick targets such as in cell analysis. Theoretical simulations show that the structures provide high transmission efficiency for surface plasmon resonance and the devices present extre-mely linear sensing characteristics. Furthermore, it is found that the transmission efficiency and the refractive index detection sensitivity of the SPR sensor can be improved by the use of a lower refractive index glass prism.

  18. [Initial osteoblast functions on a type of near β-type titanium alloys surfaces modified by the double glow plasma nitriding technology].

    Science.gov (United States)

    Qu, Y H; Li, F L; Wen, K; Wang, W

    2017-02-09

    Objective: To evaluate the adhesion, proliferation, alkaline phosphatase (ALP) activity and the expression of osteogenesis-related genes and osteoprotegerin (OPG)/receptor activator of NF-κB ligand (RANKL) of osteoblast-like cells on a type of near β-type titanium alloys (Ti-5Zr-3Sn-5Mo-15Nb, TLM) surfaces modified by the double glow plasma nitriding technology, and to investigate the effect of the modified surfaces on the initial functions of osteoblast-like cells. Methods: The surfaces of TLM were modified by the double glow plasma nitriding technology. TLM surfaces without modification were used as control. Cell morphology was observed with scanning electron microscopy (SEM). Methyl thiazolyl tetrazolium (MTT) method was used to measure cell proliferation. Cell ALP activity was evaluated by using reagent kits. The mRNA expression of Runt-related transcription factor-2 (RUNX2), typeⅠcollagen alpha 1 chain (COLⅠ α1) and OPG/RANKL were examined by quantitative real-time PCR(qRT-PCR). Results: Four hour following cell alture, cells on modified surfaces extend filopodia and intercellular junction was tight. Three days later, cell proliferation (0.277±0.007) was significantly higher than that in control group (0.249±0.004) (Pplasma nitriding technology has a positive effect on osteoblasts initial adhesion, proliferation and differentiation, and it can also improve expression of OPG mRNA and has an inhibitory effect on RANKL mRNA expression of osteoblasts.

  19. Post-natal development of the median eminence of the guinea pig.

    Science.gov (United States)

    Silverman, A J; Desnoyers, P

    1975-11-01

    The ultrastructure of the median eminence of neonatal (newborn) 1-, 3-, 5-, and 10-day old) and adult guinea pigs was studied to determine the dynamic changes occurring in this structure during early life. At birth the portal vasculature consists of the Mantelplexus and a few, non-fenestrated capillary loops. The number of ansae and the degree of fenestration increase rapidly after birth. The abundance of cytoplasmic and ciliary projections into the ventricular recess and the large numbers of organelles indicate that the ependymal cells are more active in the neonatal period than in the adult male. Moreover, the ependymal endfeet cover most of the surface area of the primary portal plexus during this time. The neuronal layers of the median eminence are difficult to distinguish at birth due to the lack of myelinated fibers in the zona interna. Significant myelination appears on day 3 but is not complete until day 10. There is a progressive increase in the numbers of Herring bodies and large neuro-secretory granules (1,500-1,700 A) during this same time period. In the zona externa, few nerve terminals abut on the perivascular space until day 3. Increases in numbers of granules per axon profile were noted for each day after birth. Despite the relatively long gestation period of the guinea pig (68-72 days), the morphologic appearance of the median eminence at birth suggests that the neurovascular link controlling anterior pituitary function is not yet complete.

  20. Measurements and Calculations of the Effects of Distortions in the Collector Surface on Efficiencies of Umbrella-Type Solar Collectors

    Science.gov (United States)

    Bond, Victor R.

    1961-01-01

    The meridional tensions along the ribs in a Mylar-covered umbrella-type solar collector produce a distortion in the reflecting surface that is detrimental to the image in the focal plane. The investigation reported herein was made to obtain measured and calculated geometric efficiencies of umbrella-type collectors as affected by these surface distortions. These studies show that if the tension transverse to the ribs is increased relative to the meridional tensions, the distortion is reduced and higher efficiencies can be attained, and if the transverse tension is small, the number of ribs in the collector must be increased for higher efficiencies.

  1. Effect of Simulant Type on the Absorptance and Emittance of Dusted Thermal Control Surfaces in a Simulated Lunar Environment

    Science.gov (United States)

    Gaier, James R.

    2010-01-01

    During the Apollo program the effects of lunar dust on thermal control surfaces was found to be more significant than anticipated, with several systems overheating due to deposition of dust on them. In an effort to reduce risk to future missions, a series of tests has been initiated to characterize the effects of dust on these surfaces, and then to develop technologies to mitigate that risk. Given the variations in albedo across the lunar surface, one variable that may be important is the darkness of the lunar dust, and this study was undertaken to address that concern. Three thermal control surfaces, AZ-93 white paint and AgFEP and AlFEP second surface mirrors were dusted with three different lunar dust simulants in a simulated lunar environment, and their integrated solar absorptance ( ) and thermal emittance ( ) values determined experimentally. The three simulants included JSC-1AF, a darker mare simulant, NU-LHT-1D, a light highlands simulant, and 1:1 mixture of the two. The response of AZ-93 was found to be slightly more pronounced than that of AgFEP. The increased with fractional dust coverage in both types of samples by a factor of 1.7 to 3.3, depending on the type of thermal control surface and the type of dust. The of the AZ-93 decreased by about 10 percent when fully covered by dust, while that of AgFEP increased by about 10 percent. It was found that / varied by more than a factor of two depending on the thermal control surface and the darkness of the dust. Given that the darkest simulant used in this study may be lighter than the darkest dust that could be encountered on the lunar surface, it becomes apparent that the performance degradation of thermal control surfaces due to dust on the Moon will be strongly dependent on the and of the dust in the specific locality

  2. Fatigue testing of three peristernal median sternotomy closure techniques

    Directory of Open Access Journals (Sweden)

    Griffin Lanny V

    2008-09-01

    Full Text Available Abstract Background Failure of a sternotomy closure because of closure system fatigue is a complication that may result in dehiscence and put the individual at risk for serious complications. The purpose of this study was to assess the fatigue performance of three peristernal median sternotomy closure techniques (figure-of-eight stainless-steel wires, figure-of-eight stainless-steel cables, or Pectofix Dynamic Sternal Fixation [DSF] stainless-steel plates in order to quantify the potential risk of fatigue failure of these devices when subject to cyclic loads in physiologically relevant loading directions. Study Design All tests were conducted on polyurethane foam sternal models. A cardiothoracic surgeon divided each sternal model longitudinally and repaired it with a closure device. Tests were performed using a materials testing system that applied cyclic loading in a uniaxial direction until the test model catastrophically broke or data run-out occurred. For each loading direction (lateral distraction and longitudinal shear, five trials of each closure technique were tested. Life data and location of device failure (if present were evaluated. Statistical analysis was performed using regression with life data allowed for correlation between life data and the various closure techniques to develop risk assessment curves for each device. Results The data show that the figure-of-eight stainless-steel cable and the DSF plate systems are considerably less likely to fail under both lateral distraction and longitudinal shear cyclic loading conditions as compared to the figure-of-eight stainless-steel wire system. Moreover, the figure-of-eight stainless-steel cable system is the most resistant to failure, particularly for high cycle counts. Conclusion This study in addition to Cohen and Griffin's earlier published biomechanical comparison of the ultimate strength of these same three closure techniques provide extensive experimental evidence regarding the

  3. Very low surface recombination velocities on p-type silicon wafers passivated with a dielectric with fixed negative charge

    Energy Technology Data Exchange (ETDEWEB)

    Agostinelli, G.; Delabie, A.; Dekkers, H.F.W.; De Wolf, S.; Beaucarne, G. [IMEC vzw, Kapeldreef 75, Leuven (Belgium); Vitanov, P.; Alexieva, Z. [CL SENES, Sofia (Bulgaria)

    2006-11-23

    Surface recombination velocities as low as 10cm/s have been obtained by treated atomic layer deposition (ALD) of Al{sub 2}O{sub 3} layers on p-type CZ silicon wafers. Low surface recombination is achieved by means of field induced surface passivation due to a high density of negative charges stored at the interface. In comparison to a diffused back surface field, an external field source allows for higher band bending, that is, a better performance. While this process yields state of the art results, it is not suited for large-scale production. Preliminary results on an industrially viable, alternative process based on a pseudo-binary system containing Al{sub 2}O{sub 3} are presented, too. With this process, surface recombination velocities of 500-1000cm/s have been attained on mc-Si wafers. (author)

  4. The prevalence of median neuropathy at wrist in systemic sclerosis patients at Srinagarind Hospital

    Directory of Open Access Journals (Sweden)

    Thanaporn Nimitbancha

    2015-01-01

    Full Text Available Objectives: To determine the prevalence and factor related with median neuropathy at wrist (MNW in systemic sclerosis patients. Study Design: Cross-sectional study. Setting: Srinagarind Hospital, Khon Kaen, Thailand. Participants: Systemic sclerosis patients who attended the Scleroderma Clinic, Srinagarind Hospital. Materials and Methods: Seventyfive systemic sclerosis patients were prospectively evaluated by questionnaire, physical examination, and electrodiagnostic study. The questionnaire consisted of the symptoms, duration, and type of systemic sclerosis. The physical examination revealed skin score of systemic sclerosis, pinprick sensation of median nerve distribution of both hands, and weakness of both abductor pollicis brevis muscles. The provocative test which were Tinel′s sign and Phalen′s maneuver were also examined. Moreover, electrodiagnostic study of the bilateral median and ulnar nerves was conducted. Results: The prevalence of MNW in systemic sclerosis patients was 44% - percentage of mild, moderate, and severe were 28%, 9.3%, and 6.7%, respectively. The prevalence of asymptomatic MNW was 88%. There were no association between the presence of MNW and related factors of systemic sclerosis. Conclusions: MNW is one of the most common entrapment neuropathies in systemic sclerosis patients. Systemic sclerosis patients should be screened for early signs of MNW.

  5. Preparation and testing of a Haemophilus influenzae Type b/Hepatitis B surface antigen conjugate vaccine.

    Science.gov (United States)

    An, So Jung; Woo, Joo Sung; Chae, Myung Hwa; Kothari, Sudeep; Carbis, Rodney

    2015-03-24

    The majority of conjugate vaccines focus on inducing an antibody response to the polysaccharide antigen and the carrier protein is present primarily to induce a T-cell dependent response. In this study conjugates consisting of poly(ribosylribitolphosphate) (PRP) purified from Haemophilus influenzae Type b bound to Hepatitis B virus surface antigen (HBsAg) virus like particles were prepared with the aim of inducing an antibody response to not only the PRP but also the HBsAg. A conjugate consisting of PRP bound to HBsAg via an adipic acid dihydrazide (ADH) spacer induced strong IgG antibodies to both the PRP and HBsAg. When conjugation was performed without the ADH spacer the induction of an anti-PRP response was equivalent to that seen by conjugate with the ADH spacer, however, a negligible anti-HBsAg response was induced. For comparison, PRP was conjugated to diphtheria toxoid (DT) and Vi polysaccharide purified from Salmonella Typhi conjugated to HBsAg both using an ADH spacer. The PRPAH-DT conjugate induced strong anti-PRP and anti-DT responses, the Vi-AHHBsAg conjugate induced a good anti-HBsAg response but not as strong as that induced by the PRPAH-HBsAg conjugate. This study demonstrated that in mice it was possible to induce robust antibody responses to both polysaccharide and carrier protein provided the conjugate has certain physico-chemical properties. A PRPAH-HBsAg conjugate with the capacity to induce anti-PRP and anti-HBsAg responses could be incorporated into a multivalent pediatric vaccine and simplify formulation of such a vaccine.

  6. Adaptation of median partial sternotomy in head and neck surgery.

    Science.gov (United States)

    Shpitzer, Thomas; Saute, Milton; Gilat, Hanna; Raveh, Eyal; Koren, Ilan; Shvero, Jacob; Bahar, Gideon; Feinmesser, Raphael

    2007-12-01

    Upper mediastinum involvement in diseases of the head and neck may require a sternal split. This study describes our adaptation of the upper median or "minimal" sternotomy technique for the treatment of head and neck pathologies. Between April 2002 and October 2005, 17 patients aged 4 to 82 years underwent minimal sternotomy in our institution for a variety of head and neck pathologies. The 17 patients included 11 adults with metastatic thyroid disease (six metastatic papillary thyroid carcinoma, two medullary carcinoma, and one Hiirthle cell carcinoma) and huge retrosternal goiter (n = 2), four adults with parathyroid disease (two primary parathyroid adenoma, one secondary hyperplasia, and one parathyroid carcinoma), and two children with lymphangioma and huge thymic cyst (one each). Average hospitalization was 8 days. Four patients needed a thoracic drain for 2 days, one had recurrent laryngeal nerve palsy, and one had phrenic nerve paresis. There were no postoperative deaths. Minimal sternotomy appears to be an excellent alternative for surgical exploration of the mediastinum and may be used in head and neck surgery for a range of indications.

  7. Lotsize optimization leading to a $p$-median problem with cardinalities

    CERN Document Server

    Gaul, Constantin; Rambau, Joerg

    2008-01-01

    We consider the problem of approximating the branch and size dependent demand of a fashion discounter with many branches by a distributing process being based on the branch delivery restricted to integral multiples of lots from a small set of available lot-types. We propose a formalized model which arises from a practical cooperation with an industry partner. Besides an integer linear programming formulation and a primal heuristic for this problem we also consider a more abstract version which we relate to several other classical optimization problems like the p-median problem, the facility location problem or the matching problem.

  8. Corona field effect surface passivation of n-type IBC cells

    OpenAIRE

    Bonilla, RS; Wilshaw, PR; Reichel, C; Hermle, M.

    2016-01-01

    Passivation of silicon surfaces is an important requirement in achieving high energy conversion efficiencies in interdigitated back contact cells. Surface passivation, commonly achieved by dielectric coatings, can be greatly improved by extrinsic addition of chemical and field effect components. In particular, cell performance is strongly dependent on front surface passivation. In this work device modelling is used to show that 200% relatively better performance can be achieved using charge e...

  9. Thermal stability of the work function of NEA type surfaces. [Negative Electron Affinity

    Science.gov (United States)

    Edwards, D., Jr.; Peria, W. T.

    1978-01-01

    The work-function stability of both Si(100) and Ge(100) surfaces activated with adsorptions of cesium and oxygen has been determined. In general, it has been found that the highest temperature to which the optimized Ge surface could be heated without an increase in its work function (1.06 eV) was about 200 C, whereas the optimized Si surface could be heated to approximately 250 C without a significant increase in the optimized work function (0.93 eV). Details are also presented on various characteristics of cesium and oxygen adsorption-desorption on these surfaces.

  10. Dose-response relationship between periodontal inflamed surface area and HbA1c in type 2 Diabetics

    NARCIS (Netherlands)

    Nesse, Willem; Linde, Annemiek; Abbas, Frank; Spijkervet, Frederik Karst Lucien; Dijkstra, Pieter Ubele; de Brabander, Eric Carl; Gerstenbluth, Izzy; Vissink, Arjan

    2009-01-01

    Nesse W, Linde A, Abbas F, Spijkervet FKL, Dijkstra PU, de Brabander EC, Gerstenbluth I, Vissink A. Dose-response relationship between periodontal inflamed surface area and HbA1c in type 2 diabetics. J Clin Periodontol 2009; 36: 295-300. doi: 10.1111/j.1600-051X.2009.01377.x. A dose-response relatio

  11. CLASSIFICATION BY TYPES OF DEFECT «PRODIR» ON AN INTERNAL SURFACE OF HOT-ROLLED PIPES

    Directory of Open Access Journals (Sweden)

    N. A. Glazunova

    2014-01-01

    Full Text Available Classification of guide scratches according to the types of defect which allows to define and eliminate in proper time the reasons of the guide scratches formation is offered, consequently the decrease in quantity of inappropriate production by this defect on internal surface of pipes is observed

  12. Nonlinear Goos-Haenchen shifts due to surface polariton resonance in Kretschmann configuration with a Kerr-type substrate

    Energy Technology Data Exchange (ETDEWEB)

    Xu Guoding, E-mail: guodingxu@163.co [Department of Physics, Suzhou University of Science and Technology, Suzhou 215009 (China); Zang Taocheng; Mao Hongmin; Pan Tao [Department of Physics, Suzhou University of Science and Technology, Suzhou 215009 (China)

    2010-07-26

    As the surface polaritons are excited in Kretschmann configuration with a Kerr-type substrate, the nonlinear Goos-Haenchen (GH) shifts exhibit the optically hysteretic response to the intensity of incident light. For thicker metal films, the GH shifts become very sensitive to the intensity of incident light and the angle of incidence.

  13. Dose-response relationship between periodontal inflamed surface area and HbA1c in type 2 Diabetics

    NARCIS (Netherlands)

    Nesse, Willem; Linde, Annemiek; Abbas, Frank; Spijkervet, Frederik Karst Lucien; Dijkstra, Pieter Ubele; de Brabander, Eric Carl; Gerstenbluth, Izzy; Vissink, Arjan

    Nesse W, Linde A, Abbas F, Spijkervet FKL, Dijkstra PU, de Brabander EC, Gerstenbluth I, Vissink A. Dose-response relationship between periodontal inflamed surface area and HbA1c in type 2 diabetics. J Clin Periodontol 2009; 36: 295-300. doi: 10.1111/j.1600-051X.2009.01377.x. A dose-response

  14. A novel multilocus sequence typing scheme for the opportunistic pathogen Propionibacterium acnes and characterization of type I cell surface-associated antigens.

    Science.gov (United States)

    McDowell, Andrew; Gao, Anna; Barnard, Emma; Fink, Colin; Murray, Philip I; Dowson, Chris G; Nagy, Istvan; Lambert, Peter A; Patrick, Sheila

    2011-07-01

    We have developed a novel multilocus sequence typing (MLST) scheme and database (http://pubmlst.org/pacnes/) for Propionibacterium acnes based on the analysis of seven core housekeeping genes. The scheme, which was validated against previously described antibody, single locus and random amplification of polymorphic DNA typing methods, displayed excellent resolution and differentiated 123 isolates into 37 sequence types (STs). An overall clonal population structure was detected with six eBURST groups representing the major clades I, II and III, along with two singletons. Two highly successful and global clonal lineages, ST6 (type IA) and ST10 (type IB(1)), representing 64 % of this current MLST isolate collection were identified. The ST6 clone and closely related single locus variants, which comprise a large clonal complex CC6, dominated isolates from patients with acne, and were also significantly associated with ophthalmic infections. Our data therefore support an association between acne and P. acnes strains from the type IA cluster and highlight the role of a widely disseminated clonal genotype in this condition. Characterization of type I cell surface-associated antigens that are not detected in ST10 or strains of type II and III identified two dermatan-sulphate-binding proteins with putative phase/antigenic variation signatures. We propose that the expression of these proteins by type IA organisms contributes to their role in the pathophysiology of acne and helps explain the recurrent nature of the disease. The MLST scheme and database described in this study should provide a valuable platform for future epidemiological and evolutionary studies of P. acnes.

  15. Direct Measurements of Fermi Level Pinning at the Surface of Intrinsically n-Type InGaAs Nanowires.

    Science.gov (United States)

    Speckbacher, Maximilian; Treu, Julian; Whittles, Thomas J; Linhart, Wojciech M; Xu, Xiaomo; Saller, Kai; Dhanak, Vinod R; Abstreiter, Gerhard; Finley, Jonathan J; Veal, Tim D; Koblmüller, Gregor

    2016-08-10

    Surface effects strongly dominate the intrinsic properties of semiconductor nanowires (NWs), an observation that is commonly attributed to the presence of surface states and their modification of the electronic band structure. Although the effects of the exposed, bare NW surface have been widely studied with respect to charge carrier transport and optical properties, the underlying electronic band structure, Fermi level pinning, and surface band bending profiles are not well explored. Here, we directly and quantitatively assess the Fermi level pinning at the surfaces of composition-tunable, intrinsically n-type InGaAs NWs, as one of the prominent, technologically most relevant NW systems, by using correlated photoluminescence (PL) and X-ray photoemission spectroscopy (XPS). From the PL spectral response, we reveal two dominant radiative recombination pathways, that is, direct near-band edge transitions and red-shifted, spatially indirect transitions induced by surface band bending. The separation of their relative transition energies changes with alloy composition by up to more than ∼40 meV and represent a direct measure for the amount of surface band bending. We further extract quantitatively the Fermi level to surface valence band maximum separation using XPS, and directly verify a composition-dependent transition from downward to upward band bending (surface electron accumulation to depletion) with increasing Ga-content x(Ga) at a crossover near x(Ga) ∼ 0.2. Core level spectra further demonstrate the nature of extrinsic surface states being caused by In-rich suboxides arising from the native oxide layer at the InGaAs NW surface.

  16. Effect of alloy type and surface conditioning on roughness and bond strength of metal brackets

    NARCIS (Netherlands)

    Nergiz, I.; Schmage, P.; Herrmann, W.; Ozcan, M.; Nergiz, [No Value

    2004-01-01

    The effect of 5 different surface conditioning methods on bonding of metal brackets to cast dental alloys was examined. The surface conditioning methods were fine (30-µm) or rough (125-µm) diamond bur, sandblasting (50-µm or 110-µm aluminum oxide [Al2O3]), and silica coating (30-µm silica). Fifty

  17. Patch-type Segmentation of Voxel Shapes using Simplified Surface Skeletons

    NARCIS (Netherlands)

    Reniers, Dennie; Telea, Alexandru

    2008-01-01

    We present a new method for decomposing a 3D voxel shape into disjoint segments using the shape’s simplified surface-skeleton. The surface skeleton of a shape consists of 2D manifolds inside its volume. Each skeleton point has a maximally inscribed ball that touches the boundary in at least two cont

  18. Effect of alloy type and surface conditioning on roughness and bond strength of metal brackets

    NARCIS (Netherlands)

    Nergiz, I.; Schmage, P.; Herrmann, W.; Ozcan, M.; Nergiz, [No Value

    2004-01-01

    The effect of 5 different surface conditioning methods on bonding of metal brackets to cast dental alloys was examined. The surface conditioning methods were fine (30-µm) or rough (125-µm) diamond bur, sandblasting (50-µm or 110-µm aluminum oxide [Al2O3]), and silica coating (30-µm silica). Fifty di

  19. Impacts of grassland types and vegetation cover changes on surface air temperature in the regions of temperate grassland of China

    Science.gov (United States)

    Shen, Xiangjin; Liu, Binhui; Li, Guangdi; Yu, Pujia; Zhou, Daowei

    2016-10-01

    The sensitivity of surface air temperature response to different grassland types and vegetation cover changes in the regions of temperate grassland of China was analyzed by observation minus reanalysis (OMR) method. The basis of the OMR approach is that reanalysis data are insensitive to local surface properties, so the temperature differences between surface observations and reanalysis can be attributed to land effects. Results showed that growing-season air temperature increased by 0.592 °C/decade in the regions of temperate grassland of China, with about 31 % of observed warming associated with the effects of grassland types and vegetation cover changes. For different grassland types, the growing-season OMR trend was the strongest for temperate desert steppe (0.259 °C/decade) and the weakest for temperate meadow (0.114 °C/decade). Our results suggest that the stronger intraseasonal changes of grassland vegetation are present, the more sensitive the OMR trend responds to the intraseasonal vegetation cover changes. In August and September, the OMR of temperate meadow showed a weak cooling trend. For temperate meadow, about 72.2 and 72.6 % of surface cooling were explained by both grassland type and increase of vegetation cover for August and September, respectively. For temperate steppe and temperate desert steppe, due to the limited soil moisture and little evaporative cooling feedback, the vegetation changes have no significant effect on the surface air temperature. These results indicate that the impact of grassland types and vegetation cover changes should be considered when projecting further climate change in the temperate grassland region of China.

  20. Influence of the long term use of a computer on median, ulnar and radial sensory nerves in the wrist region

    Directory of Open Access Journals (Sweden)

    Belgin Bamac

    2014-12-01

    Full Text Available Objectives: Repetitive microtrauma or overuse injuries may often affect upper extremities of the long term computer users. The aim of this study was to compare sensory nerve conduction velocities (SNCV for median, radial and ulnar nerves in the wrist of computer users with the same parameters in controls who do not use computers regularly. Material and Methods: Twenty one male computer users (age: mean (M = 28.3 years ± standard deviation (SD = 7.5 years and 21 male control subjects (age: M±SD = 24.1±4.6 years were recruited for the study. Limb length and the perimeters of the dominant arm and forearm were measured for each subject. The neurophysiological study consisted of measuring sensory nerve conduction of the median, ulnar and radial nerves. Results: The sensory conduction velocities of both median and ulnar nerves were significantly delayed in the dominant arm of the computer users compared to the controls. In addition, sensory conduction velocity of the median nerve was significantly delayed in the dominant extremity of the computer users compared to their non-dominant extremity. Conclusions: This study shows that computer users have a tendency toward developing median and ulnar sensory nerve damage in the wrist region. Mechanism of delayed SNCV in the median and ulnar nerves may be due to sustained extension and ulnar deviation of the wrist during computer mouse use and typing. Reduced SNCV changes were more apparent on the dominant side of the median nerve. This may indicate the increased neural deficits related to an increased use of the dominant side. Further investigation is needed to determine how to reduce potential risk factors at this stage in order to prevent development of median or ulnar neuropathy in the long term computer users.

  1. Chimeric FimH adhesin of type 1 fimbriae: a bacterial surface display system for heterologous sequences

    DEFF Research Database (Denmark)

    Pallesen, L; Poulsen, LK; Christiansen, Gunna;

    1995-01-01

    The FimH adhesin of type 1 fimbriae has been tested as a display system for heterologous protein segments on the surface of Escherichia coli. This was carried out by introduction of restriction site handles (BglII sites) in two different positions in the fimH gene, followed by in-frame insertion...... of heterologous DNA segments encoding two reporter sequences. In the selected positions such insertions did not significantly alter the function of the FimH protein with regard to surface location and adhesive ability. The system seemed to be quite flexible, since chimeric versions of the FimH adhesin containing...... as many as 56 foreign amino acids were transported to the bacterial surface as components of the fimbrial organelles. Furthermore, the foreign protein segments were recognized by insert-specific antibodies when expressed within chimeric proteins on the surface of the bacteria. The results from...

  2. Diurnal and Seasonal Variation of Clear-Sky Land Surface Temperature of Several Representative Land Surface Types in China Retrieved by GMS-5

    Institute of Scientific and Technical Information of China (English)

    WANG Minyan; Lu Daren

    2006-01-01

    The retrieved results in this paper by GMS-5/VISSR thermal infrared data with single time/dual channel Split-Window Algorithm reveal the characteristics of diurnal and seasonal variation of clear-sky land surface temperature (LST) of several representative land surface types in China, including Tarim Basin, QinghaiTibetan Plateau, Hunshandake Sands, North China Plain, and South China. The seasonal variation of clear-sky LST in above areas varies distinctly for the different surface albedo, soil water content, and the extent of influence by solar radiation. The monthly average diurnal ranges of LST have two peaks and two valleys in one year. The characteristics of LST in most land of East Asia and that of sea surface temperature (SST) in the south of Taiwan Strait and the Yellow Sea are also analyzed as comparison. Tarim Basin and Hunshandake Sands have not only considerable LST diurnal cycle but also remarkable seasonal variation.In 2000, the maximum monthly average diurnal ranges of LST in both areas are over 30 K, and the annual range in Hunshadake Sands reaches 58.50 K. Seasonal variation of LST in the Qinghai-Tibetan Plateau is less than those in East Asia, Tarim Basin, and Hunshandake Sands. However, the maximum diurnal range exists in this area. The yearly average diurnal range is 28.05 K in the Qinghai-Tibetan Plateau in 2000. The characteristics of diurnal, seasonal, and annual variation from 1998 to 2000 are also shown in this research.All the results will be valuable to the research of climate change, radiation balance, and estimation for the change of land surface types.

  3. Influence of the Lubricant Type on the Surface Quality of Steel Parts Obtained by Ironing

    Directory of Open Access Journals (Sweden)

    D. Adamović

    2015-06-01

    Full Text Available If it is needed to achieve a higher strain rate during the ironing process, which is possible without inter-stage annealing, the ironing is performed in succession through multiple dies. During that process, changes of friction conditions occur due to the change of contact conditions (dislodging of lubricants, changes of surface roughness, formation of friction junctions, etc.. In the multistage ironing, after each stage, the completely new conditions on the contact surfaces occur, which will significantly affect the quality of the workpiece surface. Lubricant has a very important role during the steel sheet metal ironing process; to separate the sheet metal surface from the tool and to reduce the friction between the contact surfaces. The influence of tribological conditions in ironing process is extremely important and it was a subject of study among researches in recent years, both in the real processes and on the tribo-models. Investigation of tribological conditions in the real processes is much longer and more expensive, so testing on the tribo-models is more frequent. Experimental research on the original tribo-model presented in this paper was aimed to indicate the changes that occur during multistage ironing, as well as to consider the impact of some factors (tool material, lubricant on die and punch on increase or decrease of the sheet metal surface roughness in ironing stages.

  4. A geomorphic and morphometric analysis of surface ice velocity variation of different valley type glaciers

    Science.gov (United States)

    Tiwari, R. K.; Garg, P. K.; Shukla, A.; Ahluwalia, R. S.; Singh, N.; Chauhan, P.

    2016-05-01

    Glacier surface ice velocity is one of the important parameters which determine the glacier dynamics. If the surface ice velocity is high in upper zone (accumulation zone) of the glacier, more ice is brought to the lower zone (ablation zone) of the glacier where it melts more rapidly. The surface ice velocity depends on multiple factors like geomorphology of a glacier and glacier valley, ice load, orientation of the glacier, slope and debris cover. In this study, we have used latest multi-temporal Landsat-8 satellite images to calculate the surface ice velocity of different glaciers from the Himalayan region and a relationship of velocity and geomorphology and geo-morphometry of the glacier has been studied. The standard procedure has been implied to estimate the glacial velocity using image to image correlation technique. The geo-morphometric parameters of the glacier surface have been derived using SRTM 90 m global DEM. It has been observed that the slope of the glacier is one of the main factors on which the velocity is dependent i.e. higher the slope higher is the velocity and more ice is brought by the glacier to the ablation zone. The debris cover over the glacier and at the terminus also affects the velocity of the glacier by restricting ice flow. Thus, observations suggest that the geomorphology and geo-morphometry of the glacier has a considerable control on the surface ice velocity of the glacier.

  5. Reduction of vertical-gust induced loads on elastic airplane model with slotted-interceptor-type surfaces

    Science.gov (United States)

    Mazutsky, A. Yu.

    2007-06-01

    Results of T-203 wind-tunnel tests of an elastic airplane model dynamically similar to Tu-204 aircraft equipped with a passive wing load reduction system are reported. The wing load reduction system comprised two auxiliary aerodynamic surfaces of the slotted-interceptor type installed symmetrically on the upper surface of the lifting wing at the boundary-layer height. It was found that, with the operating system, the additional bending moments induced by symmetric vertical discrete gusts in the wing root and at the fuselage mid-body decreased by 20%, with simultaneous increase observed in the flexure-pylon flutter speed.

  6. Differentiation of Bulk and Surface Events in p-type Point-Contact Germanium Detectors for Light WIMP Searches

    CERN Document Server

    Li, H B

    2013-01-01

    The p-type point-contact germanium detectors are novel techniques offering kg-scale radiation sensors with sub-keV sensitivities. They have been used for light Dark Matter WIMPs searches and may have potential applications in neutrino physics. There are, however, anomalous surface behaviour which needs to be characterized and understood. We describe the methods and results of a research program whose goals are to identify the bulk and surface events via software pulse shape analysis techniques, and to devise calibration schemes to evaluate the selection efficiency factors. Efficiencies-corrected background spectra from the low-background facility at Kuo-Sheng Neutrino Laboratory are derived.

  7. Weather types across the Caribbean basin and their relationship with rainfall and sea surface temperature

    Science.gov (United States)

    Moron, Vincent; Gouirand, Isabelle; Taylor, Michael

    2016-07-01

    Eight weather types (WTs) are computed over 98.75°W-56.25°W, 8.75°N-31.25°N using cluster analysis of daily low-level (925 hPa) winds and outgoing longwave radiation, without removing the mean annual cycle, by a k-means algorithm from 1979 to 2013. The WTs can be firstly interpreted as snapshots of the annual cycle with a clear distinction between 5 "wintertime" and 3 "summertime" WTs, which account together for 70 % of the total mean annual rainfall across the studied domain. The wintertime WTs occur mostly from late November to late April and are characterized by varying intensity and location of the North Atlantic subtropical high (NASH) and transient synoptic troughs along the northern edge of the domain. Large-scale subsidence dominates the whole basin but rainfall can occur over sections of the basin, especially on the windward shores of the troughs associated with the synoptic waves. The transition between wintertime and summertime WTs is rather abrupt, especially in May. One summertime WT (WT 4) is prevalent in summer, and almost exclusive around late July. It is characterized by strong NASH, fast Caribbean low level jet and rainfall mostly concentrated over the Caribbean Islands, the Florida Peninsula, the whole Central America and the tropical Eastern Pacific. The two remaining summertime WTs display widespread rainfall respectively from Central America to Bermuda (WT 5) and over the Eastern Caribbean (WT 6). Both WTs combine reduced regional scale subsidence and weaker Caribbean low-level jet relatively to WT 4. The relationships between WT frequency and El Niño Southern Oscillation (ENSO) events are broadly linear. Warm central and eastern ENSO events are associated with more WT 4 (less WT 5-6) during boreal summer and autumn (0) while this relationship is reversed during boreal summer (+1) for central events only. In boreal winter, the largest anomalies are observed for two WTs consistent with negative (WT 2) and positive (WT 8) phases of the

  8. Immobilization of ɛ-polylysine onto the probe surface for molecular adsorption type endotoxin detection system

    Science.gov (United States)

    Ooe, Katsutoshi; Tsuji, Akihito; Nishishita, Naoki; Hirano, Yoshiaki

    2007-04-01

    adsorption reaction between ɛ-polylysine and endotoxin. ɛ-polylysine has the structure of straight chain molecule composed by 25-30 residues made by lysine, and it is used as an antimicrobial agent, moreover, cellulose beads with immobilized ɛ-polylysine is used as the barrier filter for endotoxin removal. Therefore, it is expected that the endotoxin be adsorbed to the immobilized ɛ-polylysine onto the probe. As the result of this reaction, the mass of the probe is increased, and endotoxin can be detected by using of Quartz Crystal Microbalance (QCM). In our previous research, we have already acquired the proteins immobilization technique onto Au and Si surface. In this report, the proposal of molecular adsorption type endotoxin detection system, and the immobilization of ɛ-polylysine onto the probe are described. We use X-ray Photoelectron Spectroscopy (XPS) to confirm the ɛ-polylysine immobilization, and the adsorptive activity of immobilized ɛ-polylysine is measured by XPS and AFM. The purpose of this study is to bring about the realization of "Real-time endotoxin detection system".

  9. Median effective dose of remifentanil for awake laryngoscopy and intudation

    Institute of Scientific and Technical Information of China (English)

    XU Ya-chao; XUE Fu-shan; LUO Mad-ping; YANG Quan-yong; LIAO Xu; LU Yi; ZHANG Yan-ming

    2009-01-01

    Background Awake intubation requires an anesthetic management that provides sufficient patient safety and comfort, adequate intubating conditions, and stable hemodynamics. In this prospective clinical study, our aim was to determine the median effective dose (ED50) of remifentanil in combination with midazolam and airway topical anesthesia for awake laryngoscopy and intubation.Methods Thirty-six female adult patients, scheduled for elective plastic surgery under general anesthesia requiring orotracheal intubation were included in this study. Ten minutes after intravenous administration of midazolam 0.1 mg/kg, patients were assigned to receive remifentanil in bolus, followed by a continuous infusion. The bolus dose and infusion rate of remifentanil were adjusted by a modified Dixon's up-and-down method. Patient's reaction score at laryngoscopy and an Observer's Assessment of Alertness/Sedation Scale (OAA/S) were used to determine whether the remifentanil dosage regimen was accepted. During laryngoscopy, 2% lidocaine was sprayed into the airway to provide the topical anesthesia. EDso of remifentanil was calculated by the modified Dixon up-and-clown method, and the probit analysis was then used to confirm the results obtained from the modified Dixon's up-and-down method. In the patients who were scored as "accept", patient's OAA/S and reaction scores at different observed points, intubating condition score and patient's tolerance to the endotracheal tube after intubation were evaluated and recorded. Blood pressure and heart rate at different measuring points were also noted.Results ED50 of remifentanil for awake laryngoscopy and intubation obtained by the modified Dixon's up-and-down method was (0.62±0.02) pg/kg. Using probit analysis, ED50 and ED95 of remifentanil were 0.63 μg/kg (95% Cl, 0.54-0.70) and 0.83 μg/kg (95% Cl, 0.73-2.59), respectively. Nineteen patients who were scored as =accept" had an OAA/S of 15 and tolerated well laryngoscopy without significant

  10. Extended thymectomy, left pneumonectomy, pericardiectomy and partial pleurectomy for a large thymoma, using only a median sternotomy

    Directory of Open Access Journals (Sweden)

    Jorge Cruz

    2017-01-01

    Full Text Available We present a case of a large thymoma with invasion to the hilum of the lung and pleural dissemination. A 58-year-old woman was diagnosed with a type B2 thymoma, with suspected pericardium, pulmonary artery and left lung invasion and pleural metastasis (Masaoka-Koga stage IVb. A radical resection was planned after systemic chemotherapy. Through a median sternotomy, we resected the tumour, and after confirmation of pericardium and left lung invasion, we also performed resection of the pericardium, of the lung and of the pleural metastasis. The median sternotomy allowed a safe dissection of pulmonary vessels and main bronchus.

  11. Influence of body mass index on median nerve function, carpal canal pressure, and cross-sectional area of the median nerve.

    Science.gov (United States)

    Werner, Robert A; Jacobson, Jon A; Jamadar, David A

    2004-10-01

    Obese individuals have slowed conduction in the median nerve across the wrist, but the mechanism for this is not established. This case-control study of 27 obese subjects and 16 thin subjects was designed to test the hypothesis that obese individuals have higher carpal canal pressures and more median nerve swelling than thin individuals. All subjects were asymptomatic for hand symptoms, and had measurements of median and ulnar sensory nerve conduction in the nondominant hand, ultrasound measurement of the median nerve cross-sectional area proximal to the carpal canal, and carpal canal pressure measurement. There was no difference in age or gender ratio between the obese and thin groups. The median nerve cross-sectional area was equal in the obese and thin groups (9.3 mm2 vs. 9.4 mm2), as was the carpal canal pressure (16.2 mmHg vs. 15.5 mmHg, respectively). There was a strong correlation between median nerve conduction slowing across the wrist and median nerve cross-sectional area at the wrist (r = 0.55, P = 0.002). Obesity does not influence carpal canal pressure or the size of the median nerve at the wrist. However, there is a strong association between slowed median nerve conduction and increased nerve size which suggests endoneurial edema as a metabolic mechanism; the conduction slowing does not appear to be related to mechanical stress.

  12. Quantifying cell binding kinetics mediated by surface-bound blood type B antigen to immobilized antibodies

    Institute of Scientific and Technical Information of China (English)

    LI BaoXia; CHEN Juan; LONG Mian

    2008-01-01

    Cell adhesion is crucial to many biological processes, such as inflammatory responses, tumor metastasis and thrombosis formation. Recently a commercial surface plasmon resonance (SPR)-based BIAcore biosensor has been extended to determine cell binding mediated by surface-bound biomolecular interactions. How such cell binding is quantitatively governed by kinetic rates and regulating factors, however, has been poorly understood. Here we developed a novel assay to determine the binding kinetics of surface-bound biomolecular interactions using a commercial BIAcore 3000 biosensor. Human red blood cells (RBCs) presenting blood group B antigen and CM5 chip bearing immobilized anti-B monoclonal antibody (mAb) were used to obtain the time courses of response unit, or sensorgrams, when flowing RBCs over the chip surface. A cellular kinetic model was proposed to correlate the sensorgrams with kinetic rates. Impacts of regulating factors, such as cell concentration,flow duration and rate, antibody-presenting level, as well as Ph value and osmotic pressure of suspending medium were tested systematically, which imparted the confidence that the approach can be applied to kinetic measurements of cell adhesion mediated by surface-bound biomolecular interactions.These results provided a new insight into quantifying cell binding using a commercial SPR-based BIAcore biosensor.

  13. Ontogeny of identified cells from the median domain in the embryonic brain of the grasshopper Schistocerca gregaria.

    Science.gov (United States)

    Boyan, George; Posser, Susanne; Ludwig, Peter; Güntner, Michaela; Williams, Lez

    2004-04-01

    In this paper, we propose an ontogeny for previously identified cells from the median domain in the midline of the embryonic brain of the grasshopper Schistocerca gregaria. The so-called lateral cells (LCs) are characteristically located laterally within the median domain at its border with the protocerebral hemispheres. The LC occurs singly and can be identified in the early embryo on the basis of their expression of the cell surface lipocalin Lazarillo. Using immunocytochemical, dye injection, electron microscopical and histological methods, we show that these LC are neurons and derive as postmitotic cells directly from the epithelium of the median domain. Further, they and the other identified cells of the median domain such as the protocerebral commissure pioneers (PCP), co-express the Mes-3 antigen, consistent with a derivation from the mesectodermal germ layer of the embryo. Subsequent to axogenesis, electron microscopy reveals that these Mes-3-expressing LC fasciculate with the co-expressing PCPs within the developing protocerebral commissure. We present a model for the origin of all these cells based on histological data and bromodeoxyuridine incorporation. The model suggests a delamination of cells from the mesectoderm followed by a migration to their ultimate sites within the median domain.

  14. Concordance of human papillomavirus types detected on the surface and in the tissue of genital lesions in men

    OpenAIRE

    Anic, Gabriella M; Messina, Jane L.; Stoler, Mark H.; Rollison, Dana E.; Stockwell, Heather; Villa, Luisa L.; Lazcano-Ponce, Eduardo; Gage, Christine; Silva, Roberto Jose C.; Baggio, Maria L.; Salmerón, Jorge; Giuliano, Anna R.

    2013-01-01

    Swabbing the surface of a genital lesion to obtain a sample for HPV DNA testing is less invasive than a biopsy, but may not represent HPV types present in the lesion tissue. The objective of this study was to examine the concordance of HPV types detected in swab and biopsy samples from 165 genital lesions from men ages 18-70. Lesions included 90 condyloma, 10 penile intraepithelial neoplasia (PeIN), 23 non-condyloma with a known histology, and 42 lesions with an undetermined histology. All le...

  15. Effect of surfactants on surface activity and rheological properties of type I collagen at air/water interface.

    Science.gov (United States)

    Kezwoń, Aleksandra; Góral, Ilona; Frączyk, Tomasz; Wojciechowski, Kamil

    2016-12-01

    We describe the effect of three synthetic surfactants (anionic - sodium dodecyl sulfate (SDS), cationic - cetyltrimethylammonium bromide (CTAB) and nonionic - Triton X-100 (TX-100)) on surface properties of the type I calf skin collagen at the air/water interface in acidic solutions (pH 1.8). The protein concentration was fixed at 5×10(-6)molL(-1) and the surfactant concentration was varied in the range 5×10(-6)molL(-1)-1×10(-4)molL(-1), producing the protein/surfactant mixtures with molar ratios of 1:1, 1:2, 1:5, 1:10 and 1:20. An Axisymmetric Drop Shape Analysis (ADSA) method was used to determine the dynamic surface tension and surface dilatational moduli of the mixed adsorption layers. Two spectroscopic techniques: UV-vis spectroscopy and fluorimetry allowed us to determine the effect of the surfactants on the protein structure. The thermodynamic characteristic of the mixtures was studied using isothermal titration calorimetry (ITC) and differential scanning calorimetry (DSC). Modification of the collagen structure by SDS at low surfactant/protein ratios has a positive effect on the mixture's surface activity with only minor deterioration of the rheological properties of the adsorbed layers. The collagen/CTAB mixtures do not show that pronounced improvement in surface activity, while rheological properties are significantly deteriorated. The mixtures with non-ionic TX-100 do not show any synergistic effects in surface activity.

  16. Vacuum type space-like string surfaces in AdS_3 x S^3

    CERN Document Server

    Dorn, Harald; Kalousios, Chrysostomos; Megrelidze, Luka; Wuttke, Sebastian

    2010-01-01

    We construct and classify all space-like minimal surfaces in AdS_3 x S^3 which globally admit coordinates with constant induced metric on both factors. Up to O(2,2) x O(4) transformations all these surfaces, except one class, are parameterized by four real parameters. The classes of surfaces correspond to different regions in this parameter space and show quite different boundary behavior. Our analysis uses a direct construction of the string coordinates via a group theoretical treatment based on the map of AdS_3 x S^3 to SL(2,R) x SU(2). This is complemented by a cross check via standard Pohlmeyer reduction. After embedding in AdS_5 x S^5 we calculate the regularized area for solutions with a boundary spanned by a four point scattering s-channel momenta configuration.

  17. Aerodynamic shape optimization of a HSCT type configuration with improved surface definition

    Science.gov (United States)

    Thomas, Almuttil M.; Tiwari, Surendra N.

    1994-01-01

    Two distinct parametrization procedures of generating free-form surfaces to represent aerospace vehicles are presented. The first procedure is the representation using spline functions such as nonuniform rational b-splines (NURBS) and the second is a novel (geometrical) parametrization using solutions to a suitably chosen partial differential equation. The main idea is to develop a surface which is more versatile and can be used in an optimization process. Unstructured volume grid is generated by an advancing front algorithm and solutions obtained using an Euler solver. Grid sensitivity with respect to surface design parameters and aerodynamic sensitivity coefficients based on potential flow is obtained using an automatic differentiator precompiler software tool. Aerodynamic shape optimization of a complete aircraft with twenty four design variables is performed. High speed civil transport aircraft (HSCT) configurations are targeted to demonstrate the process.

  18. The GAP Portion of Pseudomonas Aeruginosa Type III Secreted Toxin ExoS Upregulates Total and Surface Levels of Wild Type CFTR

    Directory of Open Access Journals (Sweden)

    Deepali N. Tukaye

    2013-02-01

    Full Text Available Background: Pseudomonas aeruginosa (PA infections account for a large percentage of fatal hospital acquired pneumonias. One of the PA Type III secreted toxin (TTST ExoS, a bifunctional protein with N-terminal GTPase activating protein (GAP and C-terminal ADP rybosyl transferase (ADPRT activities, significantly contributes to PA virulence by targeting small molecular weight G-proteins (SMWGP. In this study, we have looked at one of the mechanisms by which the GAP portion of ExoS (ExoS-GAP mediates cellular toxicity. Methods: The effects of ExoS-GAP on CFTR trafficking were studied in CFBE41o- Kir 2.2 and MDCK cell lines stably expressing CFTR using a transient transfection system. Results: Transient transfection of ExoS-GAP increased the total and surface protein levels of mature wild type CFTR in epithelial cells stably expressing wild type (WT CFTR. The effect of ExoS-GAP was specific to CFTR in bronchial epithelial cells since it did not affect the total protein levels of Na+/K+ATPase, another membrane protein. A point mutation in the ExoS GAP domain (R146K, known to disrupt its catalytic GAP activity, abolished the effect of ExoS-GAP on WT CFTR. Lysosomal inhibition studies with Bafilomycin A1 indicate that ExoS-GAP decreased lysosomal degradation of the mature WT CFTR with concomitant increase in the total levels of mature WT CFTR. However, ExoS-GAP did not increase the total protein levels of ∆F508CFTR. Conclusion: The GAP portion of the PA TTST ExoS increases the total and surface levels of wild type CFTR in vitro mammalian cell system. The effect of ExoS-GAP on WT CFTR total protein levels provides new insight into understanding the virulent pathophysiology of PA infections.

  19. Surface barrier effect on magnetization of a current-carrying type-II superconductor

    Science.gov (United States)

    Genenko, Yu. A.; Freyhardt, H. C.

    2000-10-01

    Vortex penetration in and exit from ideal flux-filled current-carrying superconductors are studied in the frame of the modified Meissner state model accounting for the vortex interactions with the sample surface, transport current, external field and the other vortices inside the sample. The generalized Silsbee's rule is first formulated and the M- H diagram of ideal current-carrying superconductors in a parallel field is estimated which is irreversible due to the surface effect alone. In general, magnetic behaviour of superconductors is shown to be more reversible in the presence of a transport current.

  20. Comparison of the Surface Roughness of Gypsum (Dental Stone with three Types of Tissue Conditioner Impression Materials over Time

    Directory of Open Access Journals (Sweden)

    Nili M.

    2012-02-01

    Full Text Available Statement of Problems: Although the primary use of tissue conditioners is for healing the damaged mucosa but they can also be used as functional impression; it seems that its effeicasy depends on its viscoelastic features such as compatibility with gypsum and surface roughness.Purpose: The aim of this study is to compare the surface roughness of gypsum with several tissue conditioner impression materials avaliable in the market.Materials and Method: In this experimental study, three tissue conditioners (Acrosoft, viscogel & GC were used. Pars dental gypsum moldano Type III and a polyvinyl siloxane impression were used for the controls. The tissue conditioners powder liquid ratio was mixed according to the manufacturer’s recommendation and immediately poured in a mold with an internal diameter of 18 mm and depth of 2mm. The mold was completely filled. Then, a glass block with the mean roughness of 0.8 µm was placed on its surface for two hours. Then, the 5 samples were immediately placed in 37oC water for 0-24 hrs, 3, 7, and 14 days. After that, the specimens were beaded, boxed and poured with pars dental gypsum type III. The gypsum sample’s surface roughness was measured with profilometer with the length of 2.5 mm and cut-off of 0.8 mm. The results were analyzed using ANOVA and Tukey tests.Results: The results showed that surface roughness of Acrosoft in different storage times did not change significantly and there was no significant difference between Acrosoft and the control group. Viscogels surface roughness was significantly different with all other groups at zero time; with the increase of storage time the surface roughness decreases. The control group showed a significant difference with viscogel at zero time and with GC at 24 hrs and 3 days but it revealed no difference with the other groups. The least surface roughness belonged to GC at zero and 14 days and the highests surface roughness belonged to viscogel at zero time

  1. Median knock-down time as a new method for evaluating insecticide-treated textiles for mosquito control.

    Science.gov (United States)

    Skovmand, Ole; Bonnet, Julien; Pigeon, Olivier; Corbel, Vincent

    2008-06-27

    Insecticide treated bed nets are major tools for the Roll Back Malaria campaign. There are two types of Long-Lasting Insecticide-treated Nets (LNs) on the market: coated nets and insecticide-incorporated nets. Nets provided to this market need a recommendation from the World Health Organization to be purchased by donors and NGOs. During laboratory study (phase I), the first step consists in evaluating the wash resistance of a new LN product. When insecticide-incorporated nets are washed, it takes time to regenerate the insecticidal activity, i.e. insecticide must migrate to the net surface to be accessible to mosquitoes. The interval of time required for regeneration must be carefully determined to ensure the accuracy of further results. WHOPES procedures currently recommend the determination of the regeneration time by using mortality data. However, as mortality cannot exceed 100%, a LN that regenerates a surface concentration exceeding the dosage for 100% mortality, will have its regeneration time underestimated. The Median Knock Down Time (MKDT) was determined as function of insecticide dosage on an inert surface, glass, and on polyester nettings using an acetone solution or a simple emulsion. Dosage response was also established for mortality data. The same method was then applied to a commercially polyethylene netting, currently under WHOPES evaluation, to determine the dynamics of regeneration as function of repeated washings. The deltamethrin content of these nets was estimated by Capillary Gas Chromatography (GC-ECD). MKDT was a linear function of log insecticide dosage on glass as on nettings. Mortality data were either 0 or 100% for most concentrations except for a narrow range. MKDT was log linear function of total deltamethrin content in a commercial polyethylene net exposed to washings. The regeneration time of this net increased with the number of washes and MKDT became higher. A new, easy and rapid method to determine MKDT is suggested. The MKDT is

  2. MAARGHA: A Prototype System for Road Condition and Surface Type Estimation by Fusing Multi-Sensor Data

    Directory of Open Access Journals (Sweden)

    Deepak Rajamohan

    2015-07-01

    Full Text Available Road infrastructure in countries like India is expanding at a rapid pace and is becoming increasingly difficult for authorities to identify and fix the bad roads in time. Current Geographical Information Systems (GIS lack information about on-road features like road surface type, speed breakers and dynamic attribute data like the road quality. Hence there is a need to build road monitoring systems capable of collecting such information periodically. Limitations of satellite imagery with respect to the resolution and availability, makes road monitoring primarily an on-field activity. Monitoring is currently performed using special vehicles that are fitted with expensive laser scanners and need skilled resource besides providing only very low coverage. Hence such systems are not suitable for continuous road monitoring. Cheaper alternative systems using sensors like accelerometer and GPS (Global Positioning System exists but they are not equipped to achieve higher information levels. This paper presents a prototype system MAARGHA (MAARGHA in Sanskrit language means an eternal path to solution, which demonstrates that it can overcome the disadvantages of the existing systems by fusing multi-sensory data like camera image, accelerometer data and GPS trajectory at an information level, apart from providing additional road information like road surface type. MAARGHA has been tested across different road conditions and sensor data characteristics to assess its potential applications in real world scenarios. The developed system achieves higher information levels when compared to state of the art road condition estimation systems like Roadroid. The system performance in road surface type classification is dependent on the local environmental conditions at the time of imaging. In our study, the road surface type classification accuracy reached 100% for datasets with near ideal environmental conditions and dropped down to 60% for datasets with shadows and

  3. Fusion of spectral and shape features for identification of urban surface cover types using reflective and thermal hyperspectral data

    Science.gov (United States)

    Segl, K.; Roessner, S.; Heiden, U.; Kaufmann, H.

    The urban environment is characterized by an intense multifunctional use of available spaces, where the preservation of open green spaces is of special importance. For this purpose, area-wide urban biotope mapping based on CIR aerial photographs has been carried out for the large cities in Germany during the last 10 years. Because of dynamic urban development and high mapping costs, the municipal authorities are interested in effective methods for mapping urban surface cover types, which can be used for evaluation of ecological conditions in urban structures and supporting updates of biotope maps. Against this background, airborne hyperspectral remote sensing data of the DAIS 7915 instrument have been analyzed for a test site in the city of Dresden (Germany) with regard to their potential for automated material-oriented identification of urban surface cover types. Previous investigations have shown that the high spectral and spatial variabilities of these data require the development of special methods, which are capable of dealing with the resulting mixed-pixel problem in its specific characteristics in urban areas. Earlier, methodological developments led to an approach based on a combination of spectral classification and pixel-oriented unmixing techniques to facilitate sensible endmember selection based on the reflective bands of the DAIS instrument. This approach is now extended by a shape-based classification technique including the thermal bands of the DAIS instrument to improve the detection of buildings during the process of identifying seedling pixels, which represent the starting points for linear spectral unmixing. This new approach increases the reliability of differentiation between buildings and open spaces, leading to more accurate results for the spatial distribution of surface cover types. Thus, the new approach significantly enhances the exploitation of the information potential of the hyperspectral DAIS 7915 data for an area-wide identification

  4. Effect of the aerosol type uncertainty on the surface reflectance retrieval using CHRIS/PROBA hyperspectral images over land.

    Science.gov (United States)

    Tirelli, C.; Manzo, C.; Curci, G.; Bassani, C.

    2014-12-01

    The surface reflectance is crucial for the quantitative analysis of land surface properties in geological, agricultural and urban studies. The first requirement for a reliable surface reflectance estimation is an accurate atmospheric correction obtained by an appropriate selection of aerosol loading and type. The aerosol optical thickness at 550nm is widely used to describe the aerosol loading. Recent works have highlighted the relevant role of the aerosol types on the atmospheric correction process defined by their micro-physical properties. The aim of this work is to evaluate the radiative impact of the aerosol type on the surface reflectance obtained from CHRIS (Compact High Resolution Imaging Spectrometer) hyperspectral data over land. CHRIS on PROBA satellite is an high resolution multi-angular imaging spectrometer, operating in the visible near-infrared spectral domain (400 to 1000 nm). As test case the urban site of Brussels has been selected. The physically-based algorithm CHRIS@CRI (CHRIS Atmospherically Corrected Reflectance Imagery) has been developed specifically for CHRIS data by using the vector version of 6S (6SV) radiative transfer model. The atmospheric data needed for the atmospheric correction were obtained from CIMEL CE-318 of the Brussels AERONET station. CHRIS images were selected if simultaneous AERONET data were available. Other specific requirements for imagery acquisition were high aerosol loading and high solar irradiation. The aerosol radiative impact has been investigated comparing the reflectance obtained by applying the CHRIS@CRI algorithm with different aerosol types: the three aerosol standard of 6SV and two characterized by specific microphysical properties provided by the AERONET station and calculated with FlexAOD code (a post-processing tool of the chemical transport model GEOS-Chem), respectively. The results show a clear dependence of the atmospheric correction results on the aerosol absorption properties.

  5. Effect of Wrist Deviation on Median Nerve Cross-Sectional Area at Proximal Carpal Tunnel Level

    Directory of Open Access Journals (Sweden)

    Ping Yeap LOH

    2015-10-01

    Full Text Available Background: Carpal tunnel syndrome (CTS is one of the most common musculoskeletal disorders among computer users. Computer users exhibit various wrist angles while typing. Dynamic changes of wrist angle may cause different degrees of median nerve compression. The objective of this study was thus to investigate the effects of the combination of wrist flexion-extension with wrist deviation on median nerve cross-sectional area (MNCSA.Methods:  Eight right-handed participants were recruited in this study. Both wrists were examined by sonographic ultrasound (US at the proximal carpal tunnel level in the transverse plane. A total of nine wrist positions were examined, including wrist neutral (WN, wrist flexion (WF30°, and wrist extension (WE30°, together with three wrist deviation conditions, namely, without radial deviation (RD and ulnar deviation (UD, with maximal RD and with maximal UD. MNCSA was measured by tracing method with ImageJ.Results: Paired t-test showed a significant difference of WN MNCSA between the dominant hand (7.93 ± 0.63 mm2 and the non-dominant hand (6.98 ± 0.42 mm2 (P<0.001. Two-way repeated-measures ANOVA (handedness as an independent factor showed that WF30° and WE30° caused significant differences of MNCSA when compared with WN (P<0.001. However, wrist RD/UD did not have a significant interaction with the changes of MNCSA in WN, WF and WE positions.Conclusion: The results indicate a significant reduction of MNCSA when WN changed to WF and WE. Wrist RD and UD did not cause significant changes of MNCSA at different wrist positions. Keywords: Median nerve, Ultrasound, Wrist active holding, Nerve deformation

  6. Study on the turbulence model sensitivity for various cross-corrugated surfaces applied to matrix type heat exchanger

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jun Myung; Ha, Man Yeong; Son, Chang Min; Doo, Jeong Hoon; Min, June Kee [Pusan National University, Busan (Korea, Republic of)

    2016-03-15

    Diverse cross-corrugated surface geometries were considered to estimate the sensitivity of four variants of k-ε turbulence models (Low Reynolds, standard, RNG and realizable models). The cross-corrugated surfaces considered in this study are a conventional sinusoidal shape and two different asymmetric shapes. The numerical simulations using the steady incompressible Reynolds-averaged Navier Stokes (RANS) equations were carried out to obtain the steady solutions of the flow and thermal fields in the unitary cell of the heat exchanger matrix. In addition, the experimental test for the measurement of local convective heat transfer coefficients on the heat transfer surfaces was performed by means of the Transient liquid crystal (TLC) technique in order to compare the numerical results with the measured data. The features on detailed flow structure and corresponding heat transfer in the unitary cell of the matrix type heat exchanger are compared and analyzed against four different turbulence models considered in this study.

  7. Very low surface recombination velocity in n-type c-Si using extrinsic field effect passivation

    Science.gov (United States)

    Bonilla, Ruy S.; Woodcock, Frederick; Wilshaw, Peter R.

    2014-08-01

    In this article, field-effect surface passivation is characterised as either intrinsic or extrinsic, depending on the origin of the charges present in passivation dielectric layers. The surface recombination velocity of float zone, 1 Ω cm, n-type silicon was reduced to 0.15 cm/s, the lowest ever observed for a passivating double layer consisting of thermally grown silicon dioxide and plasma enhanced chemical vapour deposited silicon nitride. This result was obtained by enhancing the intrinsic chemical and field-effect passivation of the dielectric layers with uniform, extrinsic field-effect passivation induced by corona discharge. The position and stability of charges, both intrinsic and extrinsic, were characterised and their passivation effect was seen stable for two months with surface recombination velocity field-effect passivation provided a further decrease by a factor of 3.

  8. Influence of Dielectric Surface Chemistry on the Microstructure and Carrier Mobility of an n-Type Organic Semiconductor

    Energy Technology Data Exchange (ETDEWEB)

    Dhagat, P.; Haverinen, H; Klein, J; Jung, Y; Fischer, D; Delongchamp, D; Jabbour, G

    2009-01-01

    This paper examines the microstructure evolution of 3,4,9,10-perylene-tetracarboxylic bis-benzimidazole (PTCBI) thin films resulting from conditions imposed during film deposition. Modification of the silicon dioxide interface with a hydrophobic monolayer (octadecyltrichlorosilane (OTS-18)) alters the PTCBI growth habit by changing the unit cell contact plane. PTCBI films deposited on oxide surface have an orientation of (011), while films atop OTS-treated oxide surface have a preferred orientation of (001). The quality of the self assembled monolayer does not appear to influence the PTCBI growth preference significantly yet it enhances the carrier mobility, suggesting that charge traps are adequately passivated due to uniform monolayer coverage. High-quality monolayers result in n-type carrier mobility values of 0.05 cm2V-1s-1 Increasing the substrate temperature during PTCBI film deposition correlates with an increase in mobility that is most significant for films deposited on OTS-treated surface.

  9. Staircase and saw-tooth field emission steps from nanopatterned n-type GaSb surfaces

    CERN Document Server

    Kildemo, M.; Le Roy, S.; Søndergård, E.

    2009-01-01

    High resolution field emission experiments from nanopatterned GaSb surfaces consisting of densely packed nanocones prepared by low ion-beam-energy sputtering are presented. Both uncovered and metal-covered nanopatterned surfaces were studied. Surprisingly, the field emission takes place by regular steps in the field emitted current. Depending on the field, the steps are either regular, flat, plateaus, or saw-tooth shaped. To the author’s knowledge, this is the first time that such results have been reported. Each discrete jump in the field emission may be understood in terms of resonant tunneling through an extended surface space charge region in an n-type, high aspect ratio, single GaSb nanocone. The staircase shape may be understood from the spatial distribution of the aspect ratio of the cones.

  10. The ligand-binding domain of the cell surface receptor for urokinase-type plasminogen activator

    DEFF Research Database (Denmark)

    Behrendt, N; Ploug, M; Patthy, L;

    1991-01-01

    part of the intact receptor, probably including the whole sequence 1-87, and contained N-linked carbohydrate. After detergent phase separation in the Triton X-114 system, the fragment was present in the water phase where its binding activity could be demonstrated in the absence of the rest...... applications in interfering with cell-surface plasmin-mediated proteolysis....

  11. Micro-Reactions on Metal Contacts on Various Types of GaAs Surfaces.

    Science.gov (United States)

    1986-02-01

    performed at 23’ C. ,: , .. ,.. The replica of the resulting surface is taken by applying the transparent organic .,,... ’ liquid Tylose . which hardens...the Tylose layer is removed in very hot water by dissolution. The replica, thus..- . produced, is placed on a copper mesh (400pm hole width) and

  12. Reduction of fast surface states on p-type GaAs

    Science.gov (United States)

    Ahrenkiel, R. K.; Wagner, R. S.; Pattillo, S.; Dunlavy, D.; Jervis, T.; Kazmerski, L. L.; Ireland, P. J.

    1982-04-01

    Native oxides and oxyfluorides were grown on GaAs by a glow discharge plasma process. Analysis of metal-insulator-semiconductor structures based on oxyfluoride dielectrics indicated vastly different interface properties compared to pure oxide dielectrics. Whereas oxide structures showed high densities of fast surface states, oxyfluorides showed no evidence of such effects.

  13. Multiple-Objective Particle Swarm Optimization for Multi-Head Beam-Type Surface Mounting Machines

    NARCIS (Netherlands)

    Torabi, S.A.; Hamedi, M.; Ashayeri, J.

    2010-01-01

    The growing demand for electronic devices has made the manufacturing of printed circuit boards (PCBs) a promising industry over the last decades. As the demand for printed circuit boards increases, the industry becomes more dependent on highly automated assembly processes using Surface Mounting Devi

  14. Effect of surface type on structural and optical properties of Ag nanoparticles formed by dewetting

    NARCIS (Netherlands)

    Tanyeli, I.; Nasser, H.; Es, F.; Bek, A.; Turan, R.

    2013-01-01

    Integration of an array of Ag nanoparticles in solar cells is expected to increase light trapping through field enhancement and plasmonic scattering. Requirement of Ag nanoparticle decoration of cell surfaces or interfaces at the macro-scale, calls for a self-organized fabrication method such as the

  15. Magadiite Templated High Surface Area Graphene-Type Carbons from Metal-Halide based Ionic Liquids

    Energy Technology Data Exchange (ETDEWEB)

    Fulvio, Pasquale F [ORNL; Hillesheim, Patrick C [ORNL; Bauer, John C [ORNL; Mahurin, Shannon Mark [ORNL; Dai, Sheng [ORNL; Arend, Nikolas [ORNL

    2013-01-01

    Freestanding silicon films with a thickness ranging from 1 nm to several micrometers were prepared by Cat-CVD onto ionic liquid ([BMIM][BF4]) surfaces for the first time. The films, obtained without a solid substrate, can be facilely characterized by TEM and AFM to study the film formation and growth process.

  16. Study on lotus-type porous copper electroplated with a Ni coating on inner surface of pores

    Science.gov (United States)

    Du, Hao; Song, Guihong; Nakajima, Hideo; Zhao, Yanhui; Xiao, Jinquan; Xiong, Tianying

    2013-01-01

    Deposition of Ni coating on inner surface of pores was attempted by electroplating for lotus-type porous copper with pore size of 0.6 mm and pore length of 6 mm. The surface morphology, thickness, thickness distribution along the pore length, and phase composition of the coating were characterized. It is proven that the Ni coating with a polycrystalline structure can be deposited on the inner surface of the pores with length/diameter of 10 for lotus-type porous copper by agitating the electroplating solution properly during the process. It is indicated that the coating thickness distributes uniformly along the pore depth and is about 4-5 μm. Furthermore, the mechanical properties including vicker hardness, compressive yield strength and absorbed energy ability of the electroplated porous copper were evaluated. It is found that the mechanical properties are improved significantly after depositing the nickel coating inside pores of the lotus-type porous copper. Among them, 0.2% yield stress increases from 22.96 to 30.15 MPa, while absorbed energy per volume from 60.83 to 96.01 MJ/m3 when compressed to strain of 80%, which is attributed mainly to the Ni coating as an obstacle to dislocation slip during deformation and its strengthening effect for the higher strength, and the good adhesion to the pore wall of the porous copper.

  17. Co-ordinated regulation of plasmacytoid dendritic cell surface receptors upon stimulation with herpes simplex virus type 1.

    Science.gov (United States)

    Schuster, Philipp; Donhauser, Norbert; Pritschet, Kathrin; Ries, Moritz; Haupt, Sabrina; Kittan, Nicolai A; Korn, Klaus; Schmidt, Barbara

    2010-02-01

    Human plasmacytoid dendritic cells (PDC) are crucial for innate and adaptive immune responses against viral infections, mainly through production of type I interferons. Evidence is accumulating that PDC surface receptors play an important role in this process. To investigate the PDC phenotype in more detail, a chip-based expression analysis of surface receptors was combined with respective flow cytometry data obtained from fresh PDC, PDC exposed to interleukin-3 (IL-3) and/or herpes simplex virus type 1 (HSV-1). CD156b, CD229, CD305 and CD319 were newly identified on the surface of PDC, and CD180 was identified as a new intracellular antigen. After correction for multiple comparisons, a total of 33 receptors were found to be significantly regulated upon exposure to IL-3, HSV-1 or IL-3 and HSV-1. These were receptors involved in chemotaxis, antigen uptake, activation and maturation, migration, apoptosis, cytotoxicity and costimulation. Infectious and ultraviolet-inactivated HSV-1 did not differentially affect surface receptor regulation, consistent with the lack of productive virus infection in PDC, which was confirmed by HSV-1 real-time polymerase chain reaction and experiments involving autofluorescing HSV-1 particles. Viral entry was mediated at least in part by endocytosis. Time-course experiments provided evidence of a co-ordinated regulation of PDC surface markers, which play a specific role in different aspects of PDC function such as attraction to inflamed tissue, antigen recognition and subsequent migration to secondary lymphatic tissue. This knowledge can be used to investigate PDC surface receptor functions in interactions with other cells of the innate and adaptive immune system, particularly natural killer cells and cytotoxic T lymphocytes.

  18. Concordance of human papillomavirus types detected on the surface and in the tissue of genital lesions in men.

    Science.gov (United States)

    Anic, Gabriella M; Messina, Jane L; Stoler, Mark H; Rollison, Dana E; Stockwell, Heather; Villa, Luisa L; Lazcano-Ponce, Eduardo; Gage, Christine; Silva, Roberto Jose C; Baggio, Maria L; Salmerón, Jorge; Giuliano, Anna R

    2013-09-01

    Swabbing the surface of a genital lesion to obtain a sample for HPV DNA testing is less invasive than a biopsy, but may not represent HPV types present in the lesion tissue. The objective of this study was to examine the concordance of HPV types detected in swab and biopsy samples from 165 genital lesions from men ages 18-70. Lesions included 90 condyloma, 10 penile intraepithelial neoplasia (PeIN), 23 non-condyloma with a known histology, and 42 lesions with an undetermined histology. All lesions were sampled by swabbing the surface of the lesion with a pre-wetted Dacron swab and taking a shave biopsy. HPV genotyping was performed using Linear Array for swab samples and INNO-LiPA for biopsy samples. The kappa and McNemar statistics were used to compare the concordance of detecting HPV types in swab and biopsy samples. Both sampling methods had high agreement for detection of HPV DNA in condyloma (87.8% agreement) and PeIN (100% agreement). There was also high concordance for detection of HPV16 (kappa = 1.00) and HPV18 (kappa = 1.00) in PeIN, however, agreement was low to moderate for detecting HPV6 (kappa = 0.31) and HPV11 (kappa = 0.56) in condyloma. Low to moderate agreement was also observed between sampling methods for detecting individual HPV types in the non-condyloma and lesions with an indefinite histology. The results suggest that obtaining a biopsy in addition to swabbing the surface of a lesion may provide additional information about specific HVP types associated with male genital lesions. Copyright © 2013 Wiley Periodicals, Inc.

  19. Lesional HPV types of cutaneous warts can be reliably identified by surface swabs.

    Science.gov (United States)

    de Koning, M N C; Khoe, L V; Eekhof, J A H; Kamp, M; Gussekloo, J; Ter Schegget, J; Bouwes Bavinck, J N; Quint, W G V

    2011-10-01

    Large numbers of HPV types infect the human skin and members from the HPV genera alpha, gamma and mu are associated with cutaneous warts. The aim of this study was to test if the HPV genotypes in swabs of the overlying skin are identical to the types present within these warts. To this purpose, 25 persons being treated for persistent cutaneous warts were enrolled. Swabs of the overlying skin of the wart were collected from each participant. Additionally, scabs of the wart and deeper portions of the warts were surgically removed. HPV genotyping was performed on all samples using the novel HSL-PCR/MPG assay and the HPV genotyping results were compared. From the 25 wart biopsies one was HPV negative. 15 were positive for HPV27, 3 for HPV57, 2 for HPV2, 2 for HPV1, 1 for HPV3 and 1wart biopsy was positive for both HPV41 and HPV65. Scabs and swabs of the warts both showed identical typing results as the biopsies in 24 of the 25 cases (sensitivity: 96%). There was an excellent agreement between HPV types in the swabs of the skin that overlies the warts and the biopsies of these warts validating the use of wart swabs for future studies of wart-associated HPV types. HPV27 was highly prevalent (70%) in the in adults of the investigated population of patients with persistent cutaneous warts. Copyright © 2011 Elsevier B.V. All rights reserved.

  20. [Application of new chest holder in the median sternotomy for open heart surgery in adults].

    Science.gov (United States)

    Xu, C Y; Feng, D G; Wang, J X; Cheng, Z Y; Wang, F; Lin, B; Xie, Z L; Suo, L N; Du, P

    2016-09-13

    Objective: To explore the application of new chest holder in the median sternotomy for open heart surgery in adults. Methods: Two hundred adult patients in Henan Provincial People's Hospital from May 2013 to May 2015 were enrolled in the study and randomly divided into two groups. Experimental group included 100 cases who accepted the new type of chest holder in the open heart surgery. Control group were also composed of 100 cases whose sternums were fixed with the pure steel wire cerclage. Sternal closure time was recorded since the sternum closing. All subjects were followed up to obtain the chest incision healing, the incidence of sternal dehiscence, infection and secondary thoracotomy, and thus to estimated the effect of new chest holder. Results: All patients in the experimental group reached the effect of firm closed chest surgery. Sternal closure time of experimental group was much shorter than that of control group[(10±2) vs (21±4) min, Pholder in the median sternotomy for open heart surgery is more convenient with small surgical trauma. It can also effectively reduce the incidence of sternal instability, dehiscence, infection and secondary thoracotomy.

  1. Characterizing the continuously acquired cardiovascular time series during hemodialysis, using median hybrid filter preprocessing noise reduction.

    Science.gov (United States)

    Wilson, Scott; Bowyer, Andrea; Harrap, Stephen B

    2015-01-01

    The clinical characterization of cardiovascular dynamics during hemodialysis (HD) has important pathophysiological implications in terms of diagnostic, cardiovascular risk assessment, and treatment efficacy perspectives. Currently the diagnosis of significant intradialytic systolic blood pressure (SBP) changes among HD patients is imprecise and opportunistic, reliant upon the presence of hypotensive symptoms in conjunction with coincident but isolated noninvasive brachial cuff blood pressure (NIBP) readings. Considering hemodynamic variables as a time series makes a continuous recording approach more desirable than intermittent measures; however, in the clinical environment, the data signal is susceptible to corruption due to both impulsive and Gaussian-type noise. Signal preprocessing is an attractive solution to this problem. Prospectively collected continuous noninvasive SBP data over the short-break intradialytic period in ten patients was preprocessed using a novel median hybrid filter (MHF) algorithm and compared with 50 time-coincident pairs of intradialytic NIBP measures from routine HD practice. The median hybrid preprocessing technique for continuously acquired cardiovascular data yielded a dynamic regression without significant noise and artifact, suitable for high-level profiling of time-dependent SBP behavior. Signal accuracy is highly comparable with standard NIBP measurement, with the added clinical benefit of dynamic real-time hemodynamic information.

  2. Precursor type affecting surface properties and catalytic activity of sulfated zirconia

    Directory of Open Access Journals (Sweden)

    Zarubica Aleksandra R.

    2007-01-01

    Full Text Available Zirconium-hydroxide precursor samples are synthesized from Zr-hydroxide, Zr-nitrate, and Zr-alkoxide, by precipitation/impregnation, as well as by a modified sol-gel method. Precursor samples are further sulphated for the intended SO4 2- content of 4 wt.%, and calcined at 500-700oC. Differences in precursors’ origin and calcination temperature induce the incorporation of SO4 2- groups into ZrO2 matrices by various mechanisms. As a result, different amounts of residual sulphates are coupled with other structural, as well as surface properties, resulting in various catalytic activities of sulphated zirconia samples. Catalyst activity and selectivity are a complex synergistic function of tetragonal phase fraction, sulphates contents, textural and surface characteristics. Superior activity of SZ of alkoxide origin can be explained by a beneficial effect of meso-pores owing to a better accommodation of coke deposits.

  3. Type of Ground Surface during Plyometric Training Affects the Severity of Exercise-Induced Muscle Damage

    Directory of Open Access Journals (Sweden)

    Hamid Arazi

    2016-03-01

    Full Text Available The purpose of this study was to compare the changes in the symptoms of exercise-induced muscle damage from a bout of plyometric exercise (PE; 10 × 10 vertical jumps performed in aquatic, sand and firm conditions. Twenty-four healthy college-aged men were randomly assigned to one of three groups: Aquatic (AG, n = 8, Sand (SG, n = 8 and Firm (FG, n = 8. The AG performed PE in an aquatic setting with a depth of ~130 cm. The SG performed PE on a dry sand surface at a depth of 20 cm, and the FG performed PE on a 10-cm-thick wooden surface. Plasma creatine kinase (CK activity, delayed onset muscle soreness (DOMS, knee range of motion (KROM, maximal isometric voluntary contraction (MIVC of the knee extensors, vertical jump (VJ and 10-m sprint were measured before and 24, 48 and 72 h after the PE. Compared to baseline values, FG showed significantly (p < 0.05 greater changes in CK, DOMS, and VJ at 24 until 48 h. The MIVC decreased significantly for the SG and FG at 24 until 48 h post-exercise in comparison to the pre-exercise values. There were no significant (p > 0.05 time or group by time interactions in KROM. In the 10-m sprint, all the treatment groups showed significant (p < 0.05 changes compared to pre-exercise values at 24 h, and there were no significant (p > 0.05 differences between groups. The results indicate that PE in an aquatic setting and on a sand surface induces less muscle damage than on a firm surface. Therefore, training in aquatic conditions and on sand may be beneficial for the improvement of performance, with a concurrently lower risk of muscle damage and soreness.

  4. Field limit and nano-scale surface topography of superconducting radio-frequency cavity made of extreme type II superconductor

    CERN Document Server

    Kubo, Takayuki

    2014-01-01

    The field limit of superconducting radio-frequency cavity made of type II superconductor with a large Ginzburg-Landau parameter is studied with taking effects of nano-scale surface topography into account. If the surface is ideally flat, the field limit is imposed by the superheating field. On the surface of cavity, however, nano-defects almost continuously distribute and suppress the superheating field everywhere. The field limit is imposed by an effective superheating field given by the product of the superheating field for ideal flat surface and a suppression factor that contains effects of nano-defects. A nano-defect is modeled by a triangular groove with a depth smaller than the penetration depth. An analytical formula for the suppression factor of bulk and multilayer superconductors are derived in the framework of the London theory. As an immediate application, the suppression factor of the dirty Nb processed by the electropolishing is evaluated by using results of surface topographic study. The estimat...

  5. Heat transfer process of roadway embankments with different type and width of road surface in permafrost regions

    Institute of Scientific and Technical Information of China (English)

    YU Qihao; PAN Xicai; CHENG Guodong; BAI Yang

    2007-01-01

    The stability of roadbed in permafrost areas has become a big concern with rapid development and construction of throughways, highways and railways in these areas under the current climate change since it is governed by the thermal condition, or in other words, the heat transfer process in the embankment. We carried out a finite element analysis to analyze the effects of different types of road surface and the effect of breadth of embankment on the embankment heat transfer process. The results indicated that the mean annual heat transfer rate at the bottom of the roadway embankment with asphalt surfaces is 3 times that with sandy gravel surfaces. This means annual heat transfer rate increased by 60 % when the breadth of asphalt surface was doubled. The increased heat transfer rate was mainly located at the bottom of the embankment and resulted in the effect of thermal concentration, leading to degradation of the permafrost by as much as 1.6 times. It was also found that increasing embankment height would not reduce these increases of the heat transfer rate. Therefore both asphalt road surface and increased embankment breadth can lead to an intensified heat transfer rate in roadway embankment, consequently degradating the underlying permafrost and embankment instability.

  6. Survival of adenovirus types 2 and 41 in surface and ground waters measured by a plaque assay.

    Science.gov (United States)

    Rigotto, C; Hanley, K; Rochelle, P A; De Leon, R; Barardi, C R M; Yates, M V

    2011-05-01

    To manage artificial recharge systems, it is necessary to understand the inactivation process of microorganisms within aquifers so that requirements regarding storage times and treatment strategies for ground and surface waters can be developed and modeled to improve water management practices. This study was designed to investigate the survival of representative adenoviruses in surface- and groundwaters using a cell culture plaque assay with human lung carcinoma cells (A549) to enumerate surviving viruses. Adenovirus types 2 (Ad2) and 41 (Ad41) were seeded into 50 mL of three sterilized surface waters and groundwaters, and incubated at 10 and 19 °C for up to 301 days. Concentrations of Ad2 and Ad41 were relatively stable in all waters at 10 °C for at least 160 days and in some instances up to 301 days. At 19 °C, virus concentrations were reduced by 99.99% (4 log) after 301 days in surface water. There was approximately 90% (1 log) reduction of both viruses at 19 °C after 160 days of incubation in groundwater samples. There was no overall difference in survival kinetics in surface waters compared to groundwaters. The relatively high stability and long-term survival of adenoviruses in environmental waters at elevated temperatures should be considered in risk assessment models and drinking water management strategies.

  7. Cutaneous and sensory effects of two types of sanitary pads with different surfaces in the Shanghai, Chinese population.

    Science.gov (United States)

    Xuemin, Wang; Sato, Noriko; Chao, Yuan; Na, Liu; Fujimura, Tsutomu; Takagi, Yutaka; Nojiri, Hirosh; Kitahara, Takashi; Takema, Yoshinori

    2011-09-01

    Regional differences in practices, ethnicity, and climate may influence the skin compatibility of sanitary pads. Although several clinical trials have been performed in North America, Mexico, Western Europe, Eastern Europe, and Africa, there is no clinical study reported for Asia. The purpose of this study was to examine the skin compatibility of two types of modern sanitary pads in Chinese women along with a dermatological assessment and their satisfaction and preference. The self-feeling and safety of a new sanitary pad with a non-woven top specially-shaped surface sheet was tested and compared with a conventional sanitary pad with a perforated film top sheet. The subjects studied were 22 Chinese women (age: 20-50 years) with a history of mild and occasional sanitary pad dermatitis residing in Shanghai. One subject wished to discontinue the trial for personal reasons, thus 21 subjects completed the trial. These subjects were randomly assigned to two types of sanitary pads, and used one type during their next menstrual period, and another type during their following menstrual period. After each menstrual period, a dermatologist examined the objective and subjective skin symptoms and determined a score. The subjects were asked to rate their level of satisfaction with respect to overall usability, softness, stickiness, dryness, and absorbency, and to choose which pad they had preferred. No adverse effect was observed for either type of pad. Edema, erythema, burning, and stinging were not obvious symptoms for either type of pad. For itching, 30-65% of the subjects scored slight or mild for both types of pads. A comprehensive evaluation showed that several symptoms were observed on both type of pads at slight and mild levels, but minimal and insignificant differences were found between them. The majority of subjects were highly satisfied with both types, but preferred the new sanitary pad with a non-woven specially-shaped surface top sheet for its softness and

  8. Effect of resin and type of surface treatment on the flexural strength of cracked feldspathic porcelain

    Directory of Open Access Journals (Sweden)

    Kermanshah Hamid

    2015-05-01

    Full Text Available Background and Aims: Porcelain restorations are often ground for clinical adjustment and this removes the surface glaze layer and introduces flaws that can grow in wet environments due to stress-corrosion, reduce the strength of porcelain and limit restoration lifetime. The aim of this study was to introduce some surface treatment methods to control the flaws of ceramic restorations external surface and improve their strength.   Materials and Methods: 40 feldspathic discs were prepared and divided into 4 groups (n=10: not indented (group 1 and others indented by vickers with 29.4 N and received different treatments: no treatment (group 2, polished (group 3 and polished-silane-resin (group 4. Biaxial flexural strength of discs was tested after water storage. Data were analyzed using one-way ANOVA .   Results: The mean flexural strength of specimens in group 1 (134.49±12.60, 2 (94.81±15.41, 3 (89.20±16.22 and 4 (80.67±12.01 were measured. Group 1 (not indented revealed significantly higher strength (P<0.001 than that of indented groups (2, 3 and 4 . There was no significant difference between group 2 (no treatment and 3 or 4 (treated and between treatment methods (3 and 4 (P=0.136.   Conclusion: The strength of porcelains is dependent on presence of cracks. With the limitations of this study, none of the treatment methods could strengthen the cracked ceramic.

  9. Preferences of lame cows for type of surface and level of social contact in hospital pens

    DEFF Research Database (Denmark)

    Jensen, Margit Bak; Herskin, Mette S; Thomsen, Peter T.

    2015-01-01

    in a neighboring pen. These results suggest that provision of a deep-bedded lying area in hospital pens is important to the welfare of lame cows. We found no evidence of isolation-seeking behavior in animals with these diagnoses (and no systemic symptoms) while they were kept in individual hospital pens.......To investigate preferences of lame cows for flooring and level of social contact, 37 lame, lactating dairy cows (diagnosed with sole ulcer or white line disease) were housed individually for 6 d in experimental hospital pens, where they could choose between 2 equally sized areas (6m × 4.5m......) with either deep-bedded sand or a rubber surface. On both surfaces, cows could choose between 2 equally sized areas either near or away from heifers in a neighboring group pen. Cows spent more time lying on the deep-bedded sand than on the rubber surface (870 vs. 71min/d), whereas they spent less time upright...

  10. On Bootstrap Tests of Symmetry About an Unknown Median.

    Science.gov (United States)

    Zheng, Tian; Gastwirth, Joseph L

    2010-07-01

    It is important to examine the symmetry of an underlying distribution before applying some statistical procedures to a data set. For example, in the Zuni School District case, a formula originally developed by the Department of Education trimmed 5% of the data symmetrically from each end. The validity of this procedure was questioned at the hearing by Chief Justice Roberts. Most tests of symmetry (even nonparametric ones) are not distribution free in finite sample sizes. Hence, using asymptotic distribution may not yield an accurate type I error rate or/and loss of power in small samples. Bootstrap resampling from a symmetric empirical distribution function fitted to the data is proposed to improve the accuracy of the calculated p-value of several tests of symmetry. The results show that the bootstrap method is superior to previously used approaches relying on the asymptotic distribution of the tests that assumed the data come from a normal distribution. Incorporating the bootstrap estimate in a recently proposed test due to Miao, Gel and Gastwirth (2006) preserved its level and shows it has reasonable power properties on the family of distribution evaluated.

  11. A persisting median artery in a patient with symbrachydactyly and carpal tunnel syndrome.

    Science.gov (United States)

    Tollan, C J; Sivarajan, V

    2008-07-01

    A persisting median artery associated with carpal tunnel syndrome in a patient with symbrachydactyly has not been previously described in the literature. It is unclear whether there may be a developmental association between persistence of a median artery and Symbrachydactyly.

  12. Effect of surface BRDF of various land cover types on the geostationary observations of tropospheric NO2

    Directory of Open Access Journals (Sweden)

    K. Noguchi

    2014-04-01

    Full Text Available We investigated the effect of surface reflectance anisotropy, Bidirectional Reflectance Distribution Function (BRDF, on satellite retrievals of tropospheric NO2. We assume the geometry of geostationary measurements over Tokyo, which is one of the worst air-polluted regions in the East Asia. We calculated air mass factors (AMF and box AMFs (BAMF for tropospheric NO2 to evaluate the effect of BRDF by using the radiative transfer model SCIATRAN. To model the BRDF effect, we utilized the Moderate Resolution Imaging Spectroradiometer (MODIS products (MOD43B1 and MOD43B2, which provide three coefficients to express the RossThick-LiSparseReciprocal model, a semi-empirical and kernel-based model of BRDF. Because BRDF depends on the land cover type, we also utilized the High Resolution Land-Use and Land-Cover Map by the Advanced Land Observing Satellite (ALOS/Advanced Visible and Near Infrared Radiometer type 2 (AVNIR-2, which classifies the ground pixels over Tokyo into six main types: water, urban, paddy, crop, deciduous forest and evergreen forest. We first develop an empirical model of the three BRDF coefficients for each land cover type over Tokyo, and then apply the model to the calculation of land cover type dependent AMFs and BAMFs. Results show that the variability of AMF among the land types is up to several tens percent, and if we neglect the reflectance anisotropy, the difference from BRDF's AMF reaches 10% or more. The evaluation of the BAMFs calculated shows that not to consider variations in BRDF will cause large errors if the concentration of NO2 is high close to the surface, although the importance of BRDF for AMFs decreases for large aerosol optical depth (AOD.

  13. Effect of surface BRDF of various land cover types on the geostationary observations of tropospheric NO2

    Science.gov (United States)

    Noguchi, K.; Richter, A.; Rozanov, V.; Rozanov, A.; Burrows, J. P.; Irie, H.; Kita, K.

    2014-04-01

    We investigated the effect of surface reflectance anisotropy, Bidirectional Reflectance Distribution Function (BRDF), on satellite retrievals of tropospheric NO2. We assume the geometry of geostationary measurements over Tokyo, which is one of the worst air-polluted regions in the East Asia. We calculated air mass factors (AMF) and box AMFs (BAMF) for tropospheric NO2 to evaluate the effect of BRDF by using the radiative transfer model SCIATRAN. To model the BRDF effect, we utilized the Moderate Resolution Imaging Spectroradiometer (MODIS) products (MOD43B1 and MOD43B2), which provide three coefficients to express the RossThick-LiSparseReciprocal model, a semi-empirical and kernel-based model of BRDF. Because BRDF depends on the land cover type, we also utilized the High Resolution Land-Use and Land-Cover Map by the Advanced Land Observing Satellite (ALOS)/Advanced Visible and Near Infrared Radiometer type 2 (AVNIR-2), which classifies the ground pixels over Tokyo into six main types: water, urban, paddy, crop, deciduous forest and evergreen forest. We first develop an empirical model of the three BRDF coefficients for each land cover type over Tokyo, and then apply the model to the calculation of land cover type dependent AMFs and BAMFs. Results show that the variability of AMF among the land types is up to several tens percent, and if we neglect the reflectance anisotropy, the difference from BRDF's AMF reaches 10% or more. The evaluation of the BAMFs calculated shows that not to consider variations in BRDF will cause large errors if the concentration of NO2 is high close to the surface, although the importance of BRDF for AMFs decreases for large aerosol optical depth (AOD).

  14. Thermal Inertia Determination of C-type Asteroid Ryugu from in-situ Surface Brightness Temperature Measurements

    Science.gov (United States)

    Hamm, Maximilian; Grott, Matthias; Knollenberg, Jörg; Kührt, Ekkehard; Pelivan, Ivanka

    2016-10-01

    The Japanese Hayabusa-2 mission is a sample-return mission currently on its way to the C-type asteroid Ryugu. Hayabusa-2 carries the small lander MASCOT (Mobile Asteroid Surface Scout), whose scientific payload includes the infrared radiometer MARA. The primary science goal of MARA is to determine Ryugu's surface brightness temperatures at the landing site for a full asteroid rotation, which will be measured using a long-pass filter, an 8 to 12 µm bandpass, as well as four narrow bandpasses centered at wavelengths between 5 and 15 µm. From these measurements, surface thermal inertia will be derived, but because MARA performs single pixel measurements, heterogeneity in the field of view cannot be resolved. Yet, the surface will likely exhibit different surface textures, and thermal inertia in the field of view could vary from 600 (small rocks) to 50 Jm-2s-0.5K-1 (fine regolith grains). Sub-pixel heterogeneity is a common problem when interpreting radiometer data, since the associated ambiguities cannot be resolved without additional information on surface texture. For MARA, this information will be provided by the MASCOT camera, and in the present paper we have investigated to what extent different thermal inertias can be retrieved from MARA data. To test the applied approach, we generated synthetic MARA data using a thermal model of Ryugu, assuming different thermal inertias for sections of the field of view. We find that sub-pixel heterogeneity systematically deforms the diurnal temperature curve so that it is not possible to fit the data using a single thermal inertia value. However, including the area fractions of the different surface sections enables us to reconstruct the different thermal inertias to within 10% assuming appropriate measurement noise. The presented approach will increase robustness of the Ryugu thermal inertia determination and results will serve as a ground truth for the global measurements performed by the thermal infrared mapper (TIR) on

  15. Surface passivation of phosphorus-diffused n(+)-type emitters by plasma-assisted atomic-layer deposited Al2O3

    NARCIS (Netherlands)

    Hoex, B.; M. C. M. van de Sanden,; Schmidt, J.; Brendel, R.; Kessels, W. M. M.

    2012-01-01

    In recent years Al2O3 has received tremendous interest in the photovoltaic community for the application as surface passivation layer for crystalline silicon. Especially p-type c-Si surfaces are very effectively passivated by Al2O3, including p-type emitters, due to the high fixed negative charge in

  16. Determining Level of Service for Multilane Median Opening Zone

    Science.gov (United States)

    Ali, Paydar; Johnnie, Ben-Edigbe

    2017-08-01

    The road system is a capital-intensive investment, requiring thorough schematic framework and funding. Roads are built to provide an intrinsic quality of service which satisfies the road users. Roads that provide good services are expected to deliver operational performance that is consistent with their design specifications. Level of service and cumulative percentile speed distribution methods have been used in previous studies to estimate the quality of multilane highway service. Whilst the level of service approach relies on speed/flow curve, the cumulative percentile speed distribution is based solely speed. These estimation methods were used in studies carried out in Johor Malaysia. The aim of the studies is to ascertain the extent of speed reduction caused by midblock U-turn facilities as well as verify which estimation method is more reliable. At selected sites, road segments for both directional flows were divided into free-flow and midblock zones. Traffic volume, speed and vehicle type data for each zone were collected continuously for six weeks. Both estimation methods confirmed that speed reduction would be caused by midblock u-turn facilities. However level of service methods suggested that the quality of service would improve from level F to E or D at midblock zone in spite of speed reduction. Level of service was responding to traffic volume reduction at midblock u-turn facility not travel speed reduction. The studies concluded that since level of service was more responsive to traffic volume reduction than travel speed, it cannot be solely relied upon when assessing the quality of multilane highway service.

  17. Different Organization of Type I Collagen Immobilized on Silanized and Nonsilanized Titanium Surfaces Affects Fibroblast Adhesion and Fibronectin Secretion.

    Science.gov (United States)

    Marín-Pareja, Nathalia; Cantini, Marco; González-García, Cristina; Salvagni, Emiliano; Salmerón-Sánchez, Manuel; Ginebra, Maria-Pau

    2015-09-23

    Silanization has emerged in recent years as a way to obtain a stronger and more stable attachment of biomolecules to metallic substrates. However, its impact on protein conformation, a key aspect that influences cell response, has hardly been studied. In this work, we analyzed by atomic force microscopy (AFM) the distribution and conformation of type I collagen on plasma-treated surfaces before and after silanization. Subsequently, we investigated the effect of the different collagen conformations on fibroblasts adhesion and fibronectin secretion by immunofluorescence analyses. Two different organosilanes were used on plasma-treated titanium surfaces, either 3-chloropropyl-triethoxy-silane (CPTES) or 3-glycidyloxypropyl-triethoxy-silane (GPTES). The properties and amount of the adsorbed collagen were assessed by contact angle, X-ray photoelectron spectroscopy, optical waveguide lightmode spectroscopy, and AFM. AFM studies revealed different conformations of type I collagen depending on the silane employed. Collagen was organized in fibrillar networks over very hydrophilic (plasma treated titanium) or hydrophobic (silanized with CPTES) surfaces, the latter forming little globules with a beads-on-a-string appearance, whereas over surfaces presenting an intermediate hydrophobic character (silanized with GPTES), collagen was organized into clusters with a size increasing at higher protein concentration in solution. Cell response was strongly affected by collagen conformation, especially at low collagen density. The samples exhibiting collagen organized in globular clusters (GPTES-functionalized samples) favored a faster and better fibroblast adhesion as well as better cell spreading, focal adhesions formation, and more pronounced fibronectin fibrillogenesis. In contrast, when a certain protein concentration was reached at the material surface, the effect of collagen conformation was masked, and similar fibroblast response was observed in all samples.

  18. Comparison of the pulsed MIG welding process for different median current

    Institute of Scientific and Technical Information of China (English)

    Wen Yuanmei; Xue Jiaxiang; Yao Ping; Huang Shisheng

    2009-01-01

    Based on the high speed video system with electrical signals collecting and wavelet analyzing, the welding processes under three different median currents with the same median time were detected. The experimental results show that, when the median current is higher, the input peak energy is lower. And the droplet transfer is almost in spray mode. The welding process is the stablest.

  19. Modeling of reflection-type laser-driven white lighting considering phosphor particles and surface topography.

    Science.gov (United States)

    Lee, Dong-Ho; Joo, Jae-Young; Lee, Sun-Kyu

    2015-07-27

    This paper presents a model of blue laser diode (LD)-based white lighting coupled with a yellow YAG phosphor, for use in the proper design and fabrication of phosphor in automotive headlamps. First, the sample consisted of an LD, collecting lens, and phosphor was prepared that matches the model. The light distribution of the LD and the phosphor were modeled to investigate an effect of the surface topography and phosphor particle properties on the laser-driven white lighting systems by using the commercially available optical design software. Based on the proposed model, the integral spectrum distribution and the color coordinates were discussed.

  20. Improving the surface-brightness color relation for early-type stars using optical interferometry

    CERN Document Server

    Challouf, M; Mourard, D; Graczyk, D; Aroui, H; Chesneau, O; Delaa, O; Pietrzyński, G; Gieren, W; Ligi, R; Meilland, A; Perraut, K; Tallon-Bosc, I; McAlister, H; Brummelaar, T ten; Sturmann, J; Sturmann, L; Turner, N; Farrington, C; Vargas, N; Scott, N

    2014-01-01

    The aim of this work is to improve the SBC relation for early-type stars in the $-1 \\leq V-K \\leq 0$ color domain, using optical interferometry. Observations of eight B- and A-type stars were secured with the VEGA/CHARA instrument in the visible. The derived uniform disc angular diameters were converted into limb darkened angular diameters and included in a larger sample of twenty four stars, already observed by interferometry, in order to derive a revised empirical relation for O, B, A spectral type stars with a V-K color index ranging from -1 to 0. We also take the opportunity to check the consistency of the SBC relation up to $V-K \\simeq 4$ using 100 additional measurements. We determined the uniform disc angular diameter for the eight following stars: $\\gamma$ Ori, $\\zeta$ Per, $8$ Cyg, $\\iota$ Her, $\\lambda$ Aql, $\\zeta$ Peg, $\\gamma$ Lyr and $\\delta$ Cyg with V-K color ranging from -0.70 to 0.02 and typical precision of about $1.5\\%$. Using our total sample of 132 stars with $V-K$ colors index ranging f...

  1. Improved Estimation of Population Mean Using Median and Coefficient of Variation of Auxiliary Variable

    Directory of Open Access Journals (Sweden)

    Subhash Kumar Yadav,

    2014-01-01

    Full Text Available This manuscript deals with the estimation of population mean of the variable under study using an improved ratio type estimator utilizing the known values of median and coefficient of variation of auxiliary variable. The expressions for the bias and mean square error (MSE of the proposed estimator are obtained up to the first order of approximation. The optimum estimator is also obtained for the optimum value of the constant of the estimator and its optimum properties are also studied. It is shown that the proposed estimator is better than the existing ratio estimators in the literature. For the justification of the improvement of the proposed estimator over others, an empirical study is also carried out.

  2. Palladium mixed-metal surface-modified AB5-type intermetallides enhance hydrogen sorption kinetics

    Directory of Open Access Journals (Sweden)

    Roman V. Denys

    2010-09-01

    Full Text Available Surface engineering approaches were adopted in the preparation of advanced hydrogen sorption materials, based on ‘low-temperature’, AB5-type intermetallides. The approaches investigated included micro-encapsulation with palladium and mixed-metal mantles using electroless plating. The influence of micro-encapsulation on the surface morphology and kinetics of hydrogen charging were investigated. It was found that palladium-nickel (Pd-Ni co-deposition by electroless plating significantly improved the kinetics of hydrogen charging of the AB5-type intermetallides at low hydrogen pressure and temperature, after long-term pre-exposure to air. The improvement in the kinetics of hydrogen charging was credited to a synergistic effect between the palladium and nickel atoms in the catalytic mantle and the formation of an ‘interfacial bridge’ for hydrogen diffusion by the nickel atoms in the deposited layer. The developed surface-modified materials may find application in highly selective hydrogen extraction, purification, and storage from impure hydrogen feeds.

  3. Relevance of GaAs(001) surface electronic structure for high frequency dispersion on n-type accumulation capacitance

    Science.gov (United States)

    Pi, T. W.; Chen, W. S.; Lin, Y. H.; Cheng, Y. T.; Wei, G. J.; Lin, K. Y.; Cheng, C.-P.; Kwo, J.; Hong, M.

    2017-01-01

    This study investigates the origin of long-puzzled high frequency dispersion on the accumulation region of capacitance-voltage characteristics in an n-type GaAs-based metal-oxide-semiconductor. Probed adatoms with a high Pauling electronegativity, Ag and Au, unexpectedly donate charge to the contacted As/Ga atoms of as-grown α2 GaAs(001)-2 × 4 surfaces. The GaAs surface atoms behave as charge acceptors, and if not properly passivated, they would trap those electrons accumulated at the oxide and semiconductor interface under a positive bias. The exemplified core-level spectra of the Al2O3/n-GaAs(001)-2 × 4 and the Al2O3/n-GaAs(001)-4 × 6 interfaces exhibit remnant of pristine surface As emission, thereby causing high frequency dispersion in the accumulation region. For the p-type GaAs, electrons under a negatively biased condition are expelled from the interface, thereby avoiding becoming trapped.

  4. Molecular dynamics studies on the NMR structures of rabbit prion protein wild-type and mutants: surface electrostatic charge distributions

    CERN Document Server

    Zhang, Jiapu

    2014-01-01

    Prion is a misfolded protein found in mammals that causes infectious diseases of the nervous system in humans and animals. Prion diseases are invariably fatal and highly infectious neurodegenerative diseases that affect a wide variety of mammalian species such as sheep and goats, cattle, deer, elk and humans etc. Recent studies have shown that rabbits have a low susceptibility to be infected by prion diseases with respect to other animals including humans. The present study employs molecular dynamics (MD) means to unravel the mechanism of rabbit prion proteins (RaPrPC) based on the recently available rabbit NMR structures (of the wild-type and its two mutants of two surface residues). The electrostatic charge distributions on the protein surface are the focus when analysing the MD trajectories. It is found that we can conclude that surface electrostatic charge distributions indeed contribute to the structural stability of wild-type RaPrPC; this may be useful for the medicinal treatment of prion diseases.

  5. Primary cilium - antenna-like structure on the surface of most mammalian cell types

    Science.gov (United States)

    Dvorak, J.; Sitorova, V.; Hadzi Nikolov, D.; Mokry, J.; Richter, I.; Kasaova, L.; Filip, S.; Ryska, A.; Petera, J.

    2011-12-01

    The primary cilium is a sensory solitary non-motile microtubule-based organelle protruding in the quiescent phase of the cell cycle from the surface of the majority of human cells, including embryonic cells, stem cells and stromal cells of malignant tumors. The presence of a primary cilium on the surface of a cell is transient, limited to the quiescent G1(G0) phase and the beginning of the S phase of the cell cycle. The primary cilium is formed from the mother centriole. Primary cilia are key coordinators of signaling pathways during development and tissue homeostasis and, when deffective, they are a major cause of human diseases and developmental disorders, now commonly referred to as ciliopathies. Most cancer cells do not possess a primary cilium. The loss of the primary cilium is a regular feature of neoplastic transformation in the majority of solid tumors. The primary cilium could serve as a tumor suppressor organelle. The aim of this paper was to provide a review of the current knowledge of the primary cilium.

  6. Food environments and childhood weight status: effects of neighborhood median income.

    Science.gov (United States)

    Fiechtner, Lauren; Sharifi, Mona; Sequist, Thomas; Block, Jason; Duncan, Dustin T; Melly, Steven J; Rifas-Shiman, Sheryl L; Taveras, Elsie M

    2015-06-01

    A key aspect of any intervention to improve obesity is to better understand the environment in which decisions are being made related to health behaviors, including the food environment. Our aim was to examine the extent to which proximity to six types of food establishments is associated with BMI z-score and explore potential effect modification of this relationship. We used geographical information software to determine proximity from 49,770 pediatric patients' residences to six types of food establishments. BMI z-score obtained from the electronic health record was the primary outcome. In multivariable analyses, living in closest proximity to large (β, -0.09 units; 95% confidence interval [CI], -0.13, -0.05) and small supermarkets (-0.08 units; 95% CI, -0.11, -0.04) was associated with lower BMI z-score; living in closest proximity to fast food (0.09 units; 95% CI, 0.03, 0.15) and full-service restaurants (0.07 units; 95% CI, 0.01, 0.14) was associated with a higher BMI z-score versus those living farthest away. Neighborhood median income was an effect modifier of the relationships of convenience stores and full-service restaurants with BMI z-score. In both cases, closest proximity to these establishments had more of an adverse effect on BMI z-score in lower-income neighborhoods. Living closer to supermarkets and farther from fast food and full-service restaurants was associated with lower BMI z-score. Neighborhood median income was an effect modifier; convenience stores and full-service restaurants had a stronger adverse effect on BMI z-score in lower-income neighborhoods.

  7. Large-scale surface dielectric barrier discharge type reactor : effect of the electric wind on the conversion effectiveness

    Energy Technology Data Exchange (ETDEWEB)

    Jolibois, J. [Univ. de Poitiers, Poitiers (France). Centre national de la recherche scientifique, Laboratoire de Catalyse en Chimie Organique; Poitiers Univ., Futuroscope Chasseneuil Cedex (France). Centre national de la recherche scientifique, Inst. Pprime; Zouzou, N.; Moreau, E. [Poitiers Univ., Futuroscope Chasseneuil Cedex (France). Centre national de la recherche scientifique, Inst. Pprime; Tatibouet, J.M. [Univ. de Poitiers, Poitiers (France). Centre national de la recherche scientifique, Laboratoire de Catalyse en Chimie Organique

    2010-07-01

    Non-thermal plasma (NTP) techniques offer an innovative approach for air pollution reduction. Most studies in NTP techniques use volumetric discharge reactors with small dimensions and low flow rates at laboratory scale. The objective of this study was to develop an air pollution control plasma reactor at industrial scale with surface discharge. Propene (C{sub 3}H{sub 6}) was oxidized at high flow rates in a large-scale plasma reactor based on surface dielectric barrier discharge (DBD). Three different configurations of surface discharges were tested with 15 ppm of C{sub 3}H{sub 6} in air at ambient temperature for a flow rate of 50 m{sup 3} per hour. The properties of these different surface discharges were analyzed using chemical measurements and 3 component particle image velocimetry (PIV) measurements. PIV measurements were used characterize the effect of the electric wind on the polluted gas airflow inside the reactor and to explain the differences of effectiveness of the three tested plasma generators. For the three plasma generators, a propene oxidation of up to 45 percent was obtained at one J per liter. The electric wind produced by the surface discharge resulted in the formation of vortices inside the plasma reactor. This electric wind can increase gas mixing inside the plasma reactor and therefore plays a key role in conversion efficiency. It was concluded that the electric wind produced by surface discharges enables the use of this type of discharge for VOC elimination at high flow rate, with the same effectiveness of volumetric discharges. 5 refs., 10 figs.

  8. Efficacy of surface sampling methods for different types of beryllium compounds.

    Science.gov (United States)

    Dufresne, A; Mocanu, T; Viau, S; Perrault, G; Dion, C

    2011-01-01

    The objective of the research work was to evaluate the efficiency of three different sampling methods (Ghost Wipe™, micro-vacuum, and ChemTest®) in the recovery of Be dust by assessing: (1) four Be compounds (beryllium acetate, beryllium chloride, beryllium oxide and beryllium aluminium), (2) three different surfaces (polystyrene, glass and aluminium) and (3) inter-operator variation. The three sampling methods were also tested on site in a laboratory of a dental school for validation purposes. The Ghost Wipe™ method showed recovery ranging from 43.3% to 85.8% for all four Be compounds and for all three quantities of Be spiked on Petri dishes, while recovery with the micro-vacuum method ranged from 0.1% to 12.4%. On polystyrene dishes with 0.4 µg Be, the recovery ranged from 48.3% to 81.7%, with an average recovery of 59.4% for Operator 1 and 68.4% for Operator 2. The ChemTest® wipe method with beryllium acetate, beryllium chloride, and AlBeMet® showed analogous results that are in line with the manufacturer's manual, but collection of beryllium oxide was negative. In the dental laboratory, Ghost Wipe™ samplings showed better recovery than the micro-vacuum method. The ratios between the recovered quantities of Be in each location where the Ghost Wipe™ was tested differed substantially, ranging from 1.45 to 64. In the dental laboratory, a faint blue color indicating the presence of Be was observed on the ChemTest® wipes used in two locations out of six. In summary, the Ghost Wipe™ method was more efficient than micro-vacuuming in collecting the Be dust from smooth, non-porous surfaces such as Petri dishes by a factor of approximately 18. The results obtained on site in a dental laboratory also showed better recovery with Ghost Wipes™. However, the ratio of Be recovered by Ghost Wipes™ versus micro-vacuuming was much lower for surfaces where a large amount of dust was present. Wet wiping is preferred over micro-vacuuming for beryllium forms, but

  9. THE EFFECT OF THE APPLICATION OF 20% CARBAMIDE PEROXIDE ON THE GLASS IONOMER CEMENT TYPE II SURFACE HARDNESS

    Directory of Open Access Journals (Sweden)

    Ali Noerdin

    2015-06-01

    Full Text Available In dental bleaching, carbamide peroxide is usually used at concentration of 10%, 15%, to 20%. The result of our previous study showed that the application of 10% and 15% carbamide peroxide bleaching agent has increased the surface hardness of glass ionomer cement. The purpose of this study was to observe the effect of 20% carbamide peroxide bleaching to glass ionomer surface hardness. Twenty specimens of glass ionomer type II after exposed to 20% carbamide peroxide were divided into two application time groups: 4 and 8 hours per day. Glass ionomer cement surface hardness was measured by Vickers Microhardness Tester series HMV-2 with a weight of 0,025 Hv for 20 seconds. The measurement was conducted at before/no application, after a week, and after 2 weeks of application in both groups. It can be concluded that the application of 20% carbamide peroxide bleaching agent could increase the surface hardness of glass ionomer cement after 1 week and 2 weeks application period.

  10. Meniscus and beam halo formation in a tandem-type negative ion source with surface production

    Energy Technology Data Exchange (ETDEWEB)

    Miyamoto, K. [Naruto University of Education, 748 Nakashima, Takashima, Naruto-cho, Naruto-shi, Tokushima 772-8502 (Japan); Okuda, S.; Hatayama, A. [Faculty of Science and Technology, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama 223-8522 (Japan)

    2012-06-04

    A meniscus of plasma-beam boundary in H{sup -} ion sources largely affects the extracted H{sup -} ion beam optics. Although it is hypothesized that the shape of the meniscus is one of the main reasons for the beam halo observed in experiments, a physical mechanism of the beam halo formation is not yet fully understood. In this letter, it is first shown by the 2D particle in cell simulation that the H{sup -} ions extracted from the periphery of the meniscus cause a beam halo since the surface produced H{sup -} ions penetrate into the bulk plasma, and, thus, the resultant meniscus has a relatively large curvature.

  11. Dynamical analysis of a weakly coupled nonlinear dielectric waveguide -- surface-plasmon model as a new type of Josephson Junction

    CERN Document Server

    Ekşioğlu, Yasa; Güven, Kaan

    2011-01-01

    We propose that a weakly-coupled nonlinear dielectric waveguide -- surface-plasmon system can be formulated as a new type of Josephson junction. Such a system can be realized along a metal - dielectric interface where the dielectric medium hosts a nonlinear waveguide (e.g. fiber) for soliton propagation. We demonstrate that the system is in close analogy to the bosonic Josephson-Junction (BJJ) of atomic condensates at very low temperatures, yet exhibits different dynamical features. In particular, the inherently dynamic coupling parameter between soliton and surface-plasmon generates self-trapped oscillatory states at nonzero fractional populations with zero and $\\pi$ time averaged phase difference. The salient features of the dynamics are presented in the phase space.

  12. Anomalous peak-effect in type-II superconductors: A competition between bulk pinning and a surface barrier

    Energy Technology Data Exchange (ETDEWEB)

    Maksimov, I.L. [Department of Theoretical Physics, Nizhny Novgorod University, Gagarin Avenue 23, Nizhny Novgorod 603950 (Russian Federation); Ainbinder, R.M. [Department of Theoretical Physics, Nizhny Novgorod University, Gagarin Avenue 23, Nizhny Novgorod 603950 (Russian Federation)]. E-mail: romain@inbox.ru; Vodolazov, D.Yu. [Institute for Physics of Microstructures, GSP-105, Nizhny Novgorod 603950 (Russian Federation)

    2007-01-15

    In this work, the joint influence of the surface barrier and bulk pinning on the magnetic-field dependence of the critical current I {sub c} for bulk type-II superconductors is investigated. It is shown that in the weak magnetic field H {sub 0}, there is a section in the dependence I {sub c}(H {sub 0}) in which I {sub c} increases with the growth of H {sub 0}; this increase results in a pronounced peak in the dependence I {sub c}(H {sub 0}) - the anomalous peak-effect. This effect is explained by the combined influence of the surface barrier and bulk pinning. Two well-known models - the Bean model and the Kim-Anderson model - of the critical state were analysed in order to describe the anomalous peak-effect quantitatively.

  13. Comparison of land-atmosphere interaction at different surface types in the mid- to lower Yangzi River Valley

    Science.gov (United States)

    Guo, Weidong; Wang, Xueqian; Sun, Jianning; Ding, Aijun; Zou, Jun

    2016-04-01

    The mid- to lower Yangzi River Valley is located within the typical monsoon zone. Rapid urbanization, industrialization, and development of agriculture have led to fast and complicated land use and land cover changes in this region. To investigate land-atmosphere interaction in this region where human activities and monsoon climate are highly interactive with each other, micro-meteorological elements over four different surface types, i.e. urban surface represented by the observational site at Communist Party School in Nanjing (hereafter DX), suburban surface represented by the ground site at Xianling (XL), and grassland and farmland represented by field sites at Lishui County (LS-grass and LS-crop), are analyzed and their differences are revealed. Impacts of different surface parameters applied for different surface types on the radiation budget and surface-atmosphere heat, water, and mass exchanges are investigated. Results indicate that (1) the largest differences in daily average surface air temperature (Ta), surface skin temperature (Ts), and relative humidity (RH) , which are found during the dry periods between DX and LS-crop, can be up to 3.21°C, 7.26°C, and 22.79% respectively. During the growing season, the diurnal ranges of the above three elements are the smallest at DX and the largest at LS-grass, XL and LS-crop; (2) differences in radiative fluxes are mainly reflected in upward shortwave radiation (USR) that is related to surface albedo and upward longwave radiation (ULR) that is related to Ts. USR is the smallest and ULR is the largest at DX. During the growing season, the average difference in ULR between the DX site and other sites with vegetation cover can be up to 20Wm-2. The USR variability is the largest at LS-crop, while the diurnal variation of ULR is the same as that of Ts at all the four sites; (3) the differences in daily average sensible heat (H) and latent heat (LE) between DX and LS-crop are larger than 45 and 95Wm-2, respectively

  14. Accumulation of radioactive corrosion products on steel surfaces of VVER type nuclear reactors. I. 110mAg

    CSIR Research Space (South Africa)

    Hirschberg, G

    1999-03-01

    Full Text Available of radioactive corrosion products on steel surfaces of VVER type nuclear reactors. I. 110mAg G abor Hirschberg a,P al Baradlai a,K alm an Varga a,*, Gerrit Myburg b, J anos Schunk c,P eter Tilky c, Paul Stoddart d a Department of Radiochemistry, University...-cooled nuclear reactors is of great importance for a number of practical reasons. For instance, under normal operating conditions (when there is no ?ssion product release due to fuel cladding failure) the majority of radioactive contamination in the pri- mary...

  15. On propagation characteristics of SH-type surface acoustic waves in periodic metal gratings by variational principle

    Institute of Scientific and Technical Information of China (English)

    XU Fangqian; HE Shitang; LIU Jiansheng; CHEN Yixiang

    2009-01-01

    Based on D.P. Chen and Haus' theory, a theoretical method was presented to analyze dispersion characteristics of SH-type surface acoustic waves (SAWs) propagating on periodic metallic grating structures with a variational principle and coupling-of-modes equation. Without using complicated Green's function, the calculating results of the method agree well with those of Hashimoto's theory. On the other hand, Hashimoto's method is helpless for calculating the dispersion relation of short-circuited gratings on ST-90°X quartz etc. However, the method developed in this paper can successfully calculate it.

  16. Differential effects of type of keyboard playing task and tempo on surface EMG amplitudes of forearm muscles

    Directory of Open Access Journals (Sweden)

    Hyun Ju eChong

    2015-09-01

    Full Text Available Despite increasing interest in keyboard playing as a strategy for repetitive finger exercises in fine motor skill development and hand rehabilitation, comparative analysis of task-specific finger movements relevant to keyboard playing has been less extensive. This study examined whether there were differences in surface EMG activity levels of forearm muscles associated with different keyboard playing tasks. Results demonstrated higher muscle activity with sequential keyboard playing in a random pattern compared to individuated playing or sequential playing in a successive pattern. Also, the speed of finger movements was found as a factor that affect muscle activity levels, demonstrating that faster tempo elicited significantly greater muscle activity than self-paced tempo. The results inform our understanding of the type of finger movements involved in different types of keyboard playing at different tempi so as to consider the efficacy and fatigue level of keyboard playing as an intervention for amateur pianists or individuals with impaired fine motor skills.

  17. Dynamic symmetrical pattern projection based laser triangulation sensor for precise surface position measurement of various material types.

    Science.gov (United States)

    Žbontar, Klemen; Mihelj, Matjaž; Podobnik, Boštjan; Povše, Franc; Munih, Marko

    2013-04-20

    This paper describes a custom, material-type-independent laser-triangulation-based measurement system that utilizes a high-quality ultraviolet laser beam. Laser structuring applications demand material surface alignment regarding the laser focus position, where fabrication conditions are optimal. Robust alignment of various material types was solved by introducing dynamic symmetrical pattern projection, and a "double curve fitting" centroid detection algorithm with subsurface scattering compensation. Experimental results have shown that the measurement system proves robust to laser intensity variation, with measurement bias lower than 50 μm and standard deviation lower than ±6.3 μm for all materials. The developed probe has been integrated into a PCB prototyping system for material referencing purposes.

  18. Analysis of serum from type II diabetes mellitus and diabetic complication using surface-enhanced Raman spectra (SERS)

    Science.gov (United States)

    Han, H. W.; Yan, X. L.; Dong, R. X.; Ban, G.; Li, K.

    2009-03-01

    In this paper, we show surface-enhanced Raman spectra (SERS) of serums from type II diabetes mellitus and diabetic complication (coronary disease, glaucoma and cerebral infarction), and analyze the SERS through the multivariate statistical methods of principal component analysis (PCA). In particular, we find that there exist many adenines in these serums, which maybe come from DNA (RNA) damage. The relative intensity of the band at 725±2 cm-1 assigned to adenine is higher for patients than for the healthy volunteers; therefore, it can be used as an important ‘fingerprint’ in order to diagnose these diseases. It is also shown that serums from type II diabetes mellitus group, diabetic complication group and healthy volunteers group can be discriminated by PCA.

  19. Rashba-type spin splitting and spin interference of the Cu(1 1 1) surface state at room temperature

    Energy Technology Data Exchange (ETDEWEB)

    Dil, J. Hugo, E-mail: hugo.dil@epfl.ch [Institut de Physique de la Matière Condensée, Ecole Polytechnique Fédérale de Lausanne, CH-1015 Lausanne (Switzerland); Physik-Institut, Universität Zürich, Winterthurerstrasse 190, CH-8057 Zürich (Switzerland); Swiss Light Source, Paul Scherrer Institut, CH-5232 Villigen (Switzerland); Meier, Fabian [Physik-Institut, Universität Zürich, Winterthurerstrasse 190, CH-8057 Zürich (Switzerland); Swiss Light Source, Paul Scherrer Institut, CH-5232 Villigen (Switzerland); Osterwalder, Jürg [Physik-Institut, Universität Zürich, Winterthurerstrasse 190, CH-8057 Zürich (Switzerland)

    2015-05-15

    We report on the measurement of the Rashba-type spin splitting of the Shockley surface state on Cu(1 1 1) by spin- and angle-resolved photoemission at room temperature. Along the spatial direction expected for a Rashba-type effect the measured spin splitting corresponds to what has previously been reported by first principle calculations which were verified by high resolution ARPES using low temperatures and perfect crystals. Furthermore it is found that structural defects cause a spin-interference in the photoemission process and as a result the main measured spin signal is in the plane orthogonal to the typical Rashba orientation. Although the determination of the exact origin of this signal requires further investigations, the main results can be used as a benchmark for future spin-resolved photoemission set-ups.

  20. Differential effects of type of keyboard playing task and tempo on surface EMG amplitudes of forearm muscles.

    Science.gov (United States)

    Chong, Hyun Ju; Kim, Soo Ji; Yoo, Ga Eul

    2015-01-01

    Despite increasing interest in keyboard playing as a strategy for repetitive finger exercises in fine motor skill development and hand rehabilitation, comparative analysis of task-specific finger movements relevant to keyboard playing has been less extensive. This study examined, whether there were differences in surface EMG activity levels of forearm muscles associated with different keyboard playing tasks. Results demonstrated higher muscle activity with sequential keyboard playing in a random pattern compared to individuated playing or sequential playing in a successive pattern. Also, the speed of finger movements was found as a factor that affect muscle activity levels, demonstrating that faster tempo elicited significantly greater muscle activity than self-paced tempo. The results inform our understanding of the type of finger movements involved in different types of keyboard playing at different tempi. This helps to consider the efficacy and fatigue level of keyboard playing tasks when being used as an intervention for amateur pianists or individuals with impaired fine motor skills.

  1. Measuring Probabilistic Dependences at Multiple Scales Between Soil Type and Surface Morphology

    Science.gov (United States)

    Slatton, K. C.; Krekeler, C.; Cohen, M.; McKee, K. A.

    2005-12-01

    Accurate prediction of basin-scale hydrologic behavior is constrained by uncertainty in estimating soil hydraulic behavior. Extreme variability in hydraulic conductivity has been observed (>5 orders of magnitude) over relatively small areas, and studies that have examined the effects of heterogeneity on integrated hydrologic responses have observed substantial errors when structural variability is ignored. This has prompted spatially explicit representations of soil attributes in hydrologic and water quality models (e.g. TOPMODEL) that present significant parameterization constraints at high resolution. Our hypothesis is that elevation data (coarse and fine grain) can serve as a proximate predictor of soil hydraulic properties. We present an information-theoretic method to systematically rank the information contributions, with respect to soil properties (primarily texture), of several surficial and landcover structure features obtained from data at both coarse (~30m) and fine (~1m) spatial scales using a probabilistic measure known as mutual information. The method makes no a priori assumptions about the relative importance of features, thus allowing feature ranking to respond to variations in terrain and landcover. The study site is located in the riparian corridor of an urban watershed (Hogtown Creek) in the city of Gainesville, Florida. It is a surficially closed basin in the St. John's River Water Management District in Northeastern Florida. The area is low-relief and contains mixed land use (natural forested areas and urban development). Topographic data from the USGS National Elevation Dataset (NED) and the NASA Shuttle Radar Topography Mission (SRTM), along with approximate stream locations from the USGS National Hydrography Dataset, are used to generate spatially distributed coarse-scale features regarding surface morphology and drainage. Airborne Laser Swath Mapping (ALSM) data are also used to generate features relating to under-canopy topography and

  2. Response Surface Optimized Infrared-Assisted Extraction and UHPLC Determination of Flavonoid Types from Flos Sophorae.

    Science.gov (United States)

    Mou, Qianqian; He, Jingxia; Yin, Rongli; Yang, Bin; Fu, Meihong; Fang, Jing; Li, Hua

    2017-06-15

    Single-factor experiment and Box-Behnken design were applied to optimize the infrared-assisted extraction (IRAE) of rutin, quercetin, kaempferol, and isorhamnetin from Flos sophorae. Four factors (extract solvent, solid-liquid ration, extraction time, infrared power) affecting the extraction yield of flavonoids were studied. Under optimized conditions the extraction yield was 33.199 ± 0.24 mg/g, which substantially improved, compared with heating reflux extraction (HRE) and ultrasonic-assisted extraction (UAE), while extraction time was only 9 min. The eluents were rich in 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azobis (2-methyl-propionamidine) dihydrochloride radical scavenging potential (IC50 of DPPH: 53.44 ± 0.01 μg/mL, oxygen radical absorbance capacity (ORAC): 3785.83 ± 52 μmol/g) than the extracts obtained by HRE and UAE. In addition, an ultra-high performance liquid chromatography method was optimized for the identification and quantification of the tested flavonoids, and the method was validated based on its correlation coefficient (r), reproducibility (RSD, n = 5), and recovery values, which were 0.9994-0.9998, 0.74-1.83%, and 97.78-102.94%, respectively. These results confirmed that high extraction yield of flavonoids results in stronger antioxidant values and response surface methodology optimization of IRAE is a promising alternative to traditional extraction techniques for flavonoids from medicinal plants.

  3. ngs (notochord granular surface) gene encodes a novel type of intermediate filament family protein essential for notochord maintenance in zebrafish.

    Science.gov (United States)

    Tong, Xiangjun; Xia, Zhidan; Zu, Yao; Telfer, Helena; Hu, Jing; Yu, Jingyi; Liu, Huan; Zhang, Quan; Sodmergen; Lin, Shuo; Zhang, Bo

    2013-01-25

    The notochord is an important organ involved in embryonic patterning and locomotion. In zebrafish, the mature notochord consists of a single stack of fully differentiated, large vacuolated cells called chordocytes, surrounded by a single layer of less differentiated notochordal epithelial cells called chordoblasts. Through genetic analysis of zebrafish lines carrying pseudo-typed retroviral insertions, a mutant exhibiting a defective notochord with a granular appearance was isolated, and the corresponding gene was identified as ngs (notochord granular surface), which was specifically expressed in the notochord. In the mutants, the notochord started to degenerate from 32 hours post-fertilization, and the chordocytes were then gradually replaced by smaller cells derived from chordoblasts. The granular notochord phenotype was alleviated by anesthetizing the mutant embryos with tricaine to prevent muscle contraction and locomotion. Phylogenetic analysis showed that ngs encodes a new type of intermediate filament (IF) family protein, which we named chordostatin based on its function. Under the transmission electron microcopy, bundles of 10-nm-thick IF-like filaments were enriched in the chordocytes of wild-type zebrafish embryos, whereas the chordocytes in ngs mutants lacked IF-like structures. Furthermore, chordostatin-enhanced GFP (EGFP) fusion protein assembled into a filamentous network specifically in chordocytes. Taken together, our work demonstrates that ngs encodes a novel type of IF protein and functions to maintain notochord integrity for larval development and locomotion. Our work sheds light on the mechanisms of notochord structural maintenance, as well as the evolution and biological function of IF family proteins.

  4. Surface multiheme c-type cytochromes from Thermincola potens: Implications for dissimilatory metal reduction by Gram-positive bacteria

    Science.gov (United States)

    Carlson, H. K.; Iavarone, A. T.; Gorur, A.; Yeo, B. S.; Tran, R.; Melnyk, R. A.; Mathies, R. A.; Auer, M.; Coates, J. D.

    2011-12-01

    Almost nothing is known about the mechanisms of dissimilatory metal reduction by Gram-positive bacteria, although they have been shown to be the dominant species in some environments. Thermincola potens strain JR was isolated from the anode of a microbial fuel cell inoculated with anaerobic digester sludge and operated at 55 °C. Preliminary characterization revealed that T. potens coupled acetate oxidation to the reduction of hydrous ferric oxides (HFO) or the humic substances analog, anthraquinone-2,6-disulfonate (AQDS). The genome of T. potens was recently sequenced, and the abundance of multiheme c-type cytochromes (MHCs) is unusual for a Gram-positive bacterium. We present evidence from trypsin shaving LC-MS/MS experiments and surface-enhanced Raman spectroscopy (SERS) that indicates the expression of a number of MHCs during T. potens growth on either HFO or AQDS and that several MHCs are localized to the cell wall or cell surface of T. potens. Furthermore, one of the MHCs can be extracted from cells with low pH or denaturants suggesting a loose association with the cell wall or cell surface. Electron microscopy does not reveal an S-layer, and the precipitation of silver metal on the cell surface is inhibited by cyanide, supporting the involvement of surface-localized redox-active heme proteins in dissimilatory metal reduction. These results are the first direct evidence for cell-wall associated cytochromes and MHC involvement in conducting electrons across the cell envelope of a Gram-positive bacterium.

  5. Surface multiheme c-type cytochromes from Thermincola potens and implications for respiratory metal reduction by Gram-positive bacteria.

    Science.gov (United States)

    Carlson, Hans K; Iavarone, Anthony T; Gorur, Amita; Yeo, Boon Siang; Tran, Rosalie; Melnyk, Ryan A; Mathies, Richard A; Auer, Manfred; Coates, John D

    2012-01-31

    Almost nothing is known about the mechanisms of dissimilatory metal reduction by Gram-positive bacteria, although they may be the dominant species in some environments. Thermincola potens strain JR was isolated from the anode of a microbial fuel cell inoculated with anaerobic digester sludge and operated at 55 °C. Preliminary characterization revealed that T. potens coupled acetate oxidation to the reduction of hydrous ferric oxides (HFO) or anthraquinone-2,6-disulfonate (AQDS), an analog of the redox active components of humic substances. The genome of T. potens was recently sequenced, and the abundance of multiheme c-type cytochromes (MHCs) is unusual for a Gram-positive bacterium. We present evidence from trypsin-shaving LC-MS/MS experiments and surface-enhanced Raman spectroscopy (SERS) that indicates the expression of a number of MHCs during T. potens growth on either HFO or AQDS, and that several MHCs are localized to the cell wall or cell surface. Furthermore, one of the MHCs can be extracted from cells with low pH or denaturants, suggesting a loose association with the cell wall or cell surface. Electron microscopy does not reveal an S-layer, and the precipitation of silver metal on the cell surface is inhibited by cyanide, supporting the involvement of surface-localized redox-active heme proteins in dissimilatory metal reduction. These results provide unique direct evidence for cell wall-associated cytochromes and support MHC involvement in conducting electrons across the cell envelope of a Gram-positive bacterium.

  6. [Purification of ammonia-type eutrophic waterbody in surface flow constructed wetland at a low temperature].

    Science.gov (United States)

    Zheng, Shao-kui; Zhang, Yan-yan; Yang, Zhi-feng; Liu, Jia-gang

    2006-10-01

    Denitrification in three floating-plant systems, including two subspecies of hyacinth and duckweed, and foamy board system were investigated by batch cultivation at a low water temperature of 6.8 degrees C to 7.2 deggres C. Effect of initial COD on the system at a water temperature of 6.4 degrees C to 11.2 degrees C was also discussed. The results were obtained as follows: DO was one of the important factors, NH4+ -N removals in aerobic condition were 61%-88% in overall period. NH4 -N removal in plant systems was higher than that in the foamy board and control systems while differences of TN and COD removals among plant system, foamy board system and control system were determined by the floating-plant type. The increase of initial COD concentration, followed by the decrease of DO from >4 mg/L to 0 mg/L, resulted in an obvious improvement of NO; -N removal. However, it had a less effect on other water quality norms such as COD, TN and NH4+ -N.

  7. A global seasonal surface ocean climatology of phytoplankton types based on CHEMTAX analysis of HPLC pigments

    Science.gov (United States)

    Swan, Chantal M.; Vogt, Meike; Gruber, Nicolas; Laufkoetter, Charlotte

    2016-03-01

    Much advancement has been made in recent years in field data assimilation, remote sensing and ecosystem modeling, yet our global view of phytoplankton biogeography beyond chlorophyll biomass is still a cursory taxonomic picture with vast areas of the open ocean requiring field validations. High performance liquid chromatography (HPLC) pigment data combined with inverse methods offer an advantage over many other phytoplankton quantification measures by way of providing an immediate perspective of the whole phytoplankton community in a sample as a function of chlorophyll biomass. Historically, such chemotaxonomic analysis has been conducted mainly at local spatial and temporal scales in the ocean. Here, we apply a widely tested inverse approach, CHEMTAX, to a global climatology of pigment observations from HPLC. This study marks the first systematic and objective global application of CHEMTAX, yielding a seasonal climatology comprised of ~1500 1°×1° global grid points of the major phytoplankton pigment types in the ocean characterizing cyanobacteria, haptophytes, chlorophytes, cryptophytes, dinoflagellates, and diatoms, with results validated against prior regional studies where possible. Key findings from this new global view of specific phytoplankton abundances from pigments are a) the large global proportion of marine haptophytes (comprising 32±5% of total chlorophyll), whose biogeochemical functional roles are relatively unknown, and b) the contrasting spatial scales of complexity in global community structure that can be explained in part by regional oceanographic conditions. The results are publically accessible via

  8. Human papillomavirus type 16 entry: retrograde cell surface transport along actin-rich protrusions.

    Directory of Open Access Journals (Sweden)

    Mario Schelhaas

    Full Text Available The lateral mobility of individual, incoming human papillomavirus type 16 pseudoviruses (PsV bound to live HeLa cells was studied by single particle tracking using fluorescence video microscopy. The trajectories were computationally analyzed in terms of diffusion rate and mode of motion as described by the moment scaling spectrum. Four distinct modes of mobility were seen: confined movement in small zones (30-60 nm in diameter, confined movement with a slow drift, fast random motion with transient confinement, and linear, directed movement for long distances. The directed movement was most prominent on actin-rich cell protrusions such as filopodia or retraction fibres, where the rate was similar to that measured for actin retrograde flow. It was, moreover, sensitive to perturbants of actin retrograde flow such as cytochalasin D, jasplakinolide, and blebbistatin. We found that transport along actin protrusions significantly enhanced HPV-16 infection in sparse tissue culture, cells suggesting a role for in vivo infection of basal keratinocytes during wound healing.

  9. The evolution of surface magnetic fields in young solar-type stars - I. The first 250 Myr

    Science.gov (United States)

    Folsom, C. P.; Petit, P.; Bouvier, J.; Lèbre, A.; Amard, L.; Palacios, A.; Morin, J.; Donati, J.-F.; Jeffers, S. V.; Marsden, S. C.; Vidotto, A. A.

    2016-03-01

    The surface rotation rates of young solar-type stars vary rapidly with age from the end of the pre-main sequence through the early main sequence. Important changes in the dynamos operating in these stars may result from this evolution, which should be observable in their surface magnetic fields. Here we present a study aimed at observing the evolution of these magnetic fields through this critical time period. We observed stars in open clusters and stellar associations of known ages, and used Zeeman Doppler imaging to characterize their complex magnetic large-scale fields. Presented here are results for 15 stars, from five associations, with ages from 20 to 250 Myr, masses from 0.7 to 1.2 M⊙, and rotation periods from 0.4 to 6 d. We find complex large-scale magnetic field geometries, with global average strengths from 14 to 140 G. There is a clear trend towards decreasing average large-scale magnetic field strength with age, and a tight correlation between magnetic field strength and Rossby number. Comparing the magnetic properties of our zero-age main-sequence sample to those of both younger and older stars, it appears that the magnetic evolution of solar-type stars during the pre-main sequence is primarily driven by structural changes, while it closely follows the stars' rotational evolution on the main sequence.

  10. Rhein lysinate increases the median survival time of SAMP10 mice: protective role in the kidney

    Institute of Scientific and Technical Information of China (English)

    Gang HU; Jiang LIU; Yong-zhan ZHEN; Rong XU; Yu QIAO; Jie WEI; Ping TU

    2013-01-01

    Aim:To investigate the protective effects of rhein lysinate (RHL),a major bioactive constituent of the rhizome of rhubarb (Rheum palmatum Linn or Rheum tanguticum Maxim),against kidney impairment in senescence-prone inbred strain 10 (SAMP10) mice.Methods:SAMP10 mice were orally administered RHL (25 or 50 mg/kg) daily until 50% of the mice died.Senescence-resistant inbred strain 1 (SAMR1) mice administered no drug were taken as control.The kidneys were harvested after animal death,and examined morphologically and with immunochemical assays.The levels of MAD,SOD and GSH-px in the kidneys were measured with a photometric method.The expression of inflammatory factors and related proteins in the kidneys was analyzed using Western blotting.Results:Treatment of SAMP10 mice with RHL had no effect on the body weight or phenotype.However,RHL significantly prolonged the median survival time of SAMP10 mice by approximately 25%,as compared to untreated SAMP10 mice.Compared SAMR1 mice,SAMP10 mice had a significantly lower level of SOD in the kidneys,but had no significant difference in the MDA or GSH-px levels.Treatment of SAMP10 mice with RHL significantly reduced the MAD level,and increased the SOD and GSH-px levels in the kidneys.Glomerulonephritis was observed in SAMP10 mice but not in SAMR1 mice.RHL decreased the incidence of glomerulonephritis,and significantly decreased the levels of TNF-α,IL-6,NF-κB,collagen types Ⅰ and Ⅲ in the kidneys.Conclusion:Accelerated senescence is associated with glomerulonephritis in SAMP10 mice,and RHL prolongs their median survival time by red ucing the severity of glomeruloneph ritis.

  11. Crystal Structure of the Botulinum Neurotoxin Type G Binding Domain: Insight into Cell Surface Binding

    Energy Technology Data Exchange (ETDEWEB)

    Stenmark, Pål; Dong, Min; Dupuy, Jérôme; Chapman, Edwin R.; Stevens, Raymond C. (Scripps); (UW)

    2011-11-02

    Botulinum neurotoxins (BoNTs) typically bind the neuronal cell surface via dual interactions with both protein receptors and gangliosides. We present here the 1.9-{angstrom} X-ray structure of the BoNT serotype G (BoNT/G) receptor binding domain (residues 868-1297) and a detailed view of protein receptor and ganglioside binding regions. The ganglioside binding motif (SxWY) has a conserved structure compared to the corresponding regions in BoNT serotype A and BoNT serotype B (BoNT/B), but several features of interactions with the hydrophilic face of the ganglioside are absent at the opposite side of the motif in the BoNT/G ganglioside binding cleft. This may significantly reduce the affinity between BoNT/G and gangliosides. BoNT/G and BoNT/B share the protein receptor synaptotagmin (Syt) I/II. The Syt binding site has a conserved hydrophobic plateau located centrally in the proposed protein receptor binding interface (Tyr1189, Phe1202, Ala1204, Pro1205, and Phe1212). Interestingly, only 5 of 14 residues that are important for binding between Syt-II and BoNT/B are conserved in BoNT/G, suggesting that the means by which BoNT/G and BoNT/B bind Syt diverges more than previously appreciated. Indeed, substitution of Syt-II Phe47 and Phe55 with alanine residues had little effect on the binding of BoNT/G, but strongly reduced the binding of BoNT/B. Furthermore, an extended solvent-exposed hydrophobic loop, located between the Syt binding site and the ganglioside binding cleft, may serve as a third membrane association and binding element to contribute to high-affinity binding to the neuronal membrane. While BoNT/G and BoNT/B are homologous to each other and both utilize Syt-I/Syt-II as their protein receptor, the precise means by which these two toxin serotypes bind to Syt appears surprisingly divergent.

  12. Organometallic Bonding in an Ullmann-Type On-Surface Chemical Reaction Studied by High-Resolution Atomic Force Microscopy.

    Science.gov (United States)

    Kawai, Shigeki; Sadeghi, Ali; Okamoto, Toshihiro; Mitsui, Chikahiko; Pawlak, Rémy; Meier, Tobias; Takeya, Jun; Goedecker, Stefan; Meyer, Ernst

    2016-10-01

    The on-surface Ullmann-type chemical reaction synthesizes polymers by linking carbons of adjacent molecules on solid surfaces. Although an organometallic compound is recently identified as the reaction intermediate, little is known about the detailed structure of the bonded organometallic species and its influence on the molecule and the reaction. Herein atomic force microscopy at low temperature is used to study the reaction with 3,9-diiododinaphtho[2,3-b:2',3'-d]thiophene (I-DNT-VW), which is polymerized on Ag(111) in vacuum. Thermally sublimated I-DNT-VW picks up a Ag surface atom, forming a CAg bond at one end after removing an iodine. The CAg bond is usually short-lived, and a CAgC organometallic bond immediately forms with an adjacent molecule. The existence of the bonded Ag atoms strongly affects the bending angle and adsorption height of the molecular unit. Density functional theory calculations reveal the bending mechanism, which reveals that charge from the terminus of the molecule is transferred via the Ag atom into the organometallic bond and strengths the local adsorption to the substrate. Such deformations vanish when the Ag atoms are removed by annealing and CC bonds are established.

  13. Assessment of surface relief and short cracks under cyclic creep in a type 316LN austenitic stainless steel

    Science.gov (United States)

    Sarkar, Aritra; Nagesha, A.; Parameswaran, P.; Sandhya, R.; Laha, K.

    2015-12-01

    Formation of surface relief and short cracks under cyclic creep (stress-controlled fatigue) in type 316LN stainless steel was studied at temperatures ranging from ambient to 923 K using scanning electron microscopy technique. The surface topography and crack distribution behaviour under cyclic creep were found to be strong functions of testing temperature due to the difference in strain accumulation. At 823 K, surface relief mainly consisted of fine slip markings due to negligible accumulation of strain as a consequence of dynamic strain ageing (DSA) which led to an increase in the cyclic life. Persistent slip markings (PSM) with distinct extrusions containing minute cracks were seen to prevail in the temperature range 873-923 K, indicating a higher slip activity causing higher strain accumulation in the absence of DSA. Besides, a large number of secondary cracks (both transgranular and intergranular) which were partially accentuated by severe oxidation, were observed. Extensive cavitation-induced grain boundary cracking took place at 923 K, which coalesced with PSM-induced transgranular cracks resulting in failure dominated by creep that in turn led to a drastic reduction in cyclic life. Investigations on the influence of stress rate were also carried out which underlined the presence of DSA at 823 K. At 923 K, lowering the stress rate caused further strengthening of the contribution from creep damage marked by a shift in the damage mechanism from cyclic slip to diffusion.

  14. Enhancement of photocathodic stability of p-type copper(I) oxide electrodes by surface etching treatment

    Energy Technology Data Exchange (ETDEWEB)

    Amano, Fumiaki, E-mail: amano@kitakyu-u.ac.jp [Catalysis Research Center, Hokkaido University, Sapporo 001-0021 (Japan); Graduate School of Environmental Science, Hokkaido University, Sapporo 060-0810 (Japan); Department of Chemical and Environmental Engineering, The University of Kitakyushu, Kitakyushu 808-0135 (Japan); Ebina, Toshihiro [Graduate School of Environmental Science, Hokkaido University, Sapporo 060-0810 (Japan); Ohtani, Bunsho [Catalysis Research Center, Hokkaido University, Sapporo 001-0021 (Japan); Graduate School of Environmental Science, Hokkaido University, Sapporo 060-0810 (Japan)

    2014-01-01

    The photoelectrochemical properties of electrodeposited p-type copper(I) oxide (Cu{sub 2}O) films were investigated using methyl viologen (MV{sup 2+}) as an electron acceptor. The pristine Cu{sub 2}O films were deactivated during the photocathodic reaction as a result of self-reduction, whereas the (111)-oriented Cu{sub 2}O films treated in an aqueous solution containing hexamethylenetetramine at pH 5 and 90 °C exhibited stable photocurrent for MV{sup 2+} reduction into the cation radical. Scanning electron microscope images showed that the treated films contained smaller crystal grains than untreated ones. X-ray photoelectron spectroscopy revealed that the treatment etched the thin layer of copper(II) oxide from the Cu{sub 2}O polycrystalline surface. Etching of the film surface enhanced the stability and steady-state photocurrent for photocathodic reduction of MV{sup 2+}, suggesting that the crystalline composition and structures exposed on the outermost surface of Cu{sub 2}O polycrystalline films have a considerable influence on the selectivity for the photocathodic reaction over self-reduction. - Highlights: • Photoelectrochemical reduction of methyl viologen by (111)-oriented Cu{sub 2}O thin films • Cu{sub 2}O films are etched using an aqueous solution containing hexamethylenetetramine. • Etching decreases crystal grain size and removes the thin layer of CuO. • Etching enhances the stability of Cu{sub 2}O photoelectrodes.

  15. Specificity and Strain-Typing Capabilities of Nanorod Array-Surface Enhanced Raman Spectroscopy for Mycoplasma pneumoniae Detection.

    Directory of Open Access Journals (Sweden)

    Kelley C Henderson

    Full Text Available Mycoplasma pneumoniae is a cell wall-less bacterial pathogen of the human respiratory tract that accounts for > 20% of all community-acquired pneumonia (CAP. At present the most effective means for detection and strain-typing is quantitative polymerase chain reaction (qPCR, which can exhibit excellent sensitivity and specificity but requires separate tests for detection and genotyping, lacks standardization between available tests and between labs, and has limited practicality for widespread, point-of-care use. We have developed and previously described a silver nanorod array-surface enhanced Raman Spectroscopy (NA-SERS biosensing platform capable of detecting M. pneumoniae with statistically significant specificity and sensitivity in simulated and true clinical throat swab samples, and the ability to distinguish between reference strains of the two main genotypes of M. pneumoniae. Furthermore, we have established a qualitative lower endpoint of detection for NA-SERS of < 1 genome equivalent (cell/μl and a quantitative multivariate detection limit of 5.3 ± 1 cells/μl. Here we demonstrate using partial least squares- discriminatory analysis (PLS-DA of sample spectra that NA-SERS correctly identified M. pneumoniae clinical isolates from globally diverse origins and distinguished these from a panel of 12 other human commensal and pathogenic mycoplasma species with 100% cross-validated statistical accuracy. Furthermore, PLS-DA correctly classified by strain type all 30 clinical isolates with 96% cross-validated accuracy for type 1 strains, 98% cross-validated accuracy for type 2 strains, and 90% cross-validated accuracy for type 2V strains.

  16. Form vision in the insect dorsal ocelli: an anatomical and optical analysis of the dragonfly median ocellus.

    Science.gov (United States)

    Berry, Richard P; Stange, Gert; Warrant, Eric J

    2007-05-01

    Previous work has suggested that dragonfly ocelli are specifically adapted to resolve horizontally extended features of the world, such as the horizon. We investigate the optical and anatomical properties of the median ocellus of Hemicordulia tau and Aeshna mixta to determine the extent to which the findings support this conclusion. Dragonfly median ocelli are shown to possess a number of remarkable properties: astigmatism arising from the elliptical shape of the lens is cancelled by the bilobed shape of the inner lens surface, interference microscopy reveals complex gradients of refractive index within the lens, the morphology of the retina results in zones of high acuity, and the eye has an exceedingly high sensitivity for a diurnal terrestrial invertebrate. It is concluded that dragonfly ocelli employ a number of simple, yet elegant, anatomical and optical strategies to ensure high sensitivity, fast transduction speed, wide fields of views and a modicum of spatial resolving power.

  17. The Median-Median Line

    Science.gov (United States)

    Wilson, David C.

    2010-01-01

    Graphing bivariate data in a scatter plot and drawing an approximate line of best fit for the data have become commonly recommended activities for middle school and high school students. The graphing calculator has provided a mechanism for students both to approximate a best-fit line and to calculate the best-fit line using a built-in option. Two…

  18. Acceptable differences in sensory and motor latencies between the median and ulnar nerves.

    Science.gov (United States)

    Grossart, Elizabeth A; Prahlow, Nathan D; Buschbacher, Ralph M

    2006-01-01

    The median and ulnar nerves are often studied during the same electrodiagnostic examination. The sensory and motor latencies of these nerves have been compared to detect a common electrodiagnostic entity: median neuropathy at the wrist. However, this comparison could also be used to diagnose less common ulnar pathology. For this reason, it is important to establish normal values for comparing median and ulnar sensory and motor latencies. Previous research deriving these differences in latency has had some limitations. The purpose of this study was to derive an improved normative database for the acceptable differences in latency between the median and ulnar sensory and motor nerves of the same limb. Median and ulnar sensory and motor latencies were obtained from 219 and 238 asymptomatic risk-factor-free subjects, respectively. An analysis of variance was performed to determine whether physical characteristics, specifically age, race, gender, height, or body mass index (as an indicator of obesity), correlated with differences in latency. Differences in sensory latencies were unaffected by physical characteristics. The upper limit of normal difference between median and ulnar (median longer than ulnar) onset latency was 0.5 ms (97th percentile), whereas the peak latency value was 0.4 ms (97th percentile). The upper limit of normal difference between ulnar-versus-median (ulnar longer than median) onset latency was 0.3 ms (97th percentile), whereas the peak-latency value was 0.5 ms (97th percentile). The mean difference in motor latencies correlated with age, with older subjects having a greater variability. In subjects aged 50 and over, the mean difference in median-versus-ulnar latency was 0.9 ms +/- 0.4 ms. The upper limit of normal difference (median longer than ulnar) was 1.7 ms (97th percentile). The upper limit of normal ulnar motor latency is attained if the ulnar latency comes within 0.3 ms of the median latency. In individuals less than 50 years of age, the

  19. Real time processing of Fourier domain optical coherence tomography with fixed-pattern noise removal by partial median subtraction using a graphics processing unit.

    Science.gov (United States)

    Watanabe, Yuuki

    2012-05-01

    The author presents a graphics processing unit (GPU) programming for real-time Fourier domain optical coherence tomography (FD-OCT) with fixed-pattern noise removal by subtracting mean and median. In general, the fixed-pattern noise can be removed by the averaged spectrum from the many spectra of an actual measurement. However, a mean-spectrum results in artifacts as residual lateral lines caused by a small number of high-reflective points on a sample surface. These artifacts can be eliminated from OCT images by using medians instead of means. However, median calculations that are based on a sorting algorithm can generate a large amount of computation time. With the developed GPU programming, highly reflective surface regions were obtained by calculating the standard deviation of the Fourier transformed data in the lateral direction. The medians and means were then subtracted at the observed regions and other regions, such as backgrounds. When the median calculation was less than 256 positions out of a total 512 depths in an OCT image with 1024 A-lines, the GPU processing rate was faster than that of the line scan camera (46.9 kHz). Therefore, processed OCT images can be displayed in real-time using partial medians.

  20. Effective surface passivation of p-type crystalline silicon with silicon oxides formed by light-induced anodisation

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Jie, E-mail: j.cui@unsw.edu.au [School of Photovoltaic and Renewable Energy Engineering, The University of New South Wales, Sydney 2052 (Australia); Grant, Nicholas [Centre for Sustainable Energy Systems, Australian National University, Canberra, A.C.T. 0200 (Australia); Lennon, Alison [School of Photovoltaic and Renewable Energy Engineering, The University of New South Wales, Sydney 2052 (Australia)

    2014-12-30

    Highlights: • The surface passivation by anodic SiO{sub 2} formed by light-induced anodisation is investigated. • The anodic SiO{sub 2} grows lower temperatures with shorter growth times. After annealing in oxygen and then forming gas the effective minority carrier lifetime is increased to 150 μs. • It shows a very low positive Q{sub eff} of 3.4 × 10{sup 11} cm{sup −2}, a moderate D{sub it} of 6 × 10{sup 11} eV{sup −1} cm{sup −2}. • It has a very low leakage current density suggesting its application in solar cell as a functional dielectric. - Abstract: Electronic surface passivation of p-type crystalline silicon by anodic silicon dioxide (SiO{sub 2}) was investigated. The anodic SiO{sub 2} was grown by light-induced anodisation (LIA) in diluted sulphuric acid at room temperature, a process that is significantly less-expensive than thermal oxidation which is widely-used in silicon solar cell fabrication. After annealing in oxygen and then forming gas at 400 °C for 30 min, the effective minority carrier lifetime of 3–5 Ω cm, boron-doped Czochralski silicon wafers with a phosphorus-doped 80 Ω/□ emitter and a LIA anodic SiO{sub 2} formed on the p-type surface was increased by two orders of magnitude to 150 μs. Capacitance–voltage measurements demonstrated a very low positive charge density of 3.4 × 10{sup 11} cm{sup −2} and a moderate density of interface states of 6 × 10{sup 11} eV{sup −1} cm{sup −2}. This corresponded to a silicon surface recombination velocity of 62 cm s{sup −1}, which is comparable with values reported for other anodic SiO{sub 2} films, which required higher temperatures and longer growth times, and significantly lower than oxides grown by chemical vapour deposition techniques. Additionally, a very low leakage current density of 3.5 × 10{sup −10} and 1.6 × 10{sup −9} A cm{sup −2} at 1 and −1 V, respectively, was measured for LIA SiO{sub 2} suggesting its potential application as insulation layer in

  1. Role of Geobacter sulfurreducens Outer Surface c-Type Cytochromes in Reduction of Soil Humic Acid and Anthraquinone-2,6-Disulfonate▿

    Science.gov (United States)

    Voordeckers, James W.; Kim, Byoung-Chan; Izallalen, Mounir; Lovley, Derek R.

    2010-01-01

    Deleting individual genes for outer surface c-type cytochromes in Geobacter sulfurreducens partially inhibited the reduction of humic substances and anthraquinone-2,6,-disulfonate. Complete inhibition was obtained only when five of these genes were simultaneously deleted, suggesting that diverse outer surface cytochromes can contribute to the reduction of humic substances and other extracellular quinones. PMID:20154112

  2. Role of Geobacter sulfurreducens outer surface c-type cytochromes in reduction of soil humic acid and anthraquinone-2,6-disulfonate.

    Science.gov (United States)

    Voordeckers, James W; Kim, Byoung-Chan; Izallalen, Mounir; Lovley, Derek R

    2010-04-01

    Deleting individual genes for outer surface c-type cytochromes in Geobacter sulfurreducens partially inhibited the reduction of humic substances and anthraquinone-2,6,-disulfonate. Complete inhibition was obtained only when five of these genes were simultaneously deleted, suggesting that diverse outer surface cytochromes can contribute to the reduction of humic substances and other extracellular quinones.

  3. Positron annihilation study of vacancy-type defects in Al single crystal foils with the tweed structures across the surface

    Energy Technology Data Exchange (ETDEWEB)

    Kuznetsov, Pavel, E-mail: kpv@ispms.tsc.ru [National Research Tomsk Polytechnic University, Tomsk, 634050 (Russian Federation); Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634055 (Russian Federation); Cizek, Jacub, E-mail: jcizek@mbox.troja.mff.cuni.cz; Hruska, Petr [Charles University in Prague, Praha, CZ-18000 Czech Republic (Czech Republic); Anwad, Wolfgang [Institut für Strahlenphysik, Helmholtz-Zentrum Dresden-Rossendorf, Dresden, D-01314 Germany (Germany); Bordulev, Yuri; Lider, Andrei; Laptev, Roman [National Research Tomsk Polytechnic University, Tomsk, 634050 (Russian Federation); Mironov, Yuri [Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634055 (Russian Federation)

    2015-10-27

    The vacancy-type defects in the aluminum single crystal foils after a series of the cyclic tensions were studied using positron annihilation. Two components were identified in the positron lifetime spectra associated with the annihilation of free positrons and positrons trapped by dislocations. With increasing number of cycles the dislocation density firstly increases and reaches a maximum value at N = 10 000 cycles but then it gradually decreases and at N = 70 000 cycles falls down to the level typical for the virgin samples. The direct evidence on the formation of a two-phase system “defective near-surface layer/base Al crystal” in aluminum foils at cyclic tension was obtained using a positron beam with the variable energy.

  4. The Sensing of Humidity by Surface-Type Ag/FORMYL-TIPPCu(II)/Ag Sensor for Environmental Monitoring

    Science.gov (United States)

    Khan, Dil Nawaz; Sayyad, Muhammad Hassan; Tahir, Muhammad; Wahab, Fazal; Yaseen, Muhammad; Ali, Mukhtar; Munawar, Munawar Ali

    2014-06-01

    In this paper, we have studied the effects of changing relative humidity on the electrical parameters and their multi frequency response of the surface type Ag/formyl-TIPPCu(II)/Ag humidity sensors. The silver electrodes of thickness 100 nm were primarily deposited on cleaned glass substrates by thermal evaporator. A gap of 40 μm was created between the electrodes of each device by using mask during the evaporation process. Thin films of formyl-TIPPCu(II) of 140 nm thickness were grown on silver electrodes by thermal sublimation technique. The values of capacitance and resistance of the sensors were found at different humidity levels at frequency of 1, 10 and 100 kHz of AC input signal. A remarkable increase in capacitance and decrease in resistance were observed during the rise of relative humidity from 45% to 95% RH. The hysteresis response of these humidity sensors was also studied at 1 kHz AC signal.

  5. The VLT-FLAMES Tarantula Survey. XXV. Surface nitrogen abundances of O-type giants and supergiants

    Science.gov (United States)

    Grin, N. J.; Ramírez-Agudelo, O. H.; de Koter, A.; Sana, H.; Puls, J.; Brott, I.; Crowther, P. A.; Dufton, P. L.; Evans, C. J.; Gräfener, G.; Herrero, A.; Langer, N.; Lennon, D. J.; van Loon, J. Th.; Markova, N.; de Mink, S. E.; Najarro, F.; Schneider, F. R. N.; Taylor, W. D.; Tramper, F.; Vink, J. S.; Walborn, N. R.

    2017-04-01

    Context. Theoretically, rotation-induced chemical mixing in massive stars has far reaching evolutionary consequences, affecting the sequence of morphological phases, lifetimes, nucleosynthesis, and supernova characteristics. Aims: Using a sample of 72 presumably single O-type giants to supergiants observed in the context of the VLT-FLAMES Tarantula Survey (VFTS), we aim to investigate rotational mixing in evolved core-hydrogen burning stars initially more massive than 15 M⊙ by analysing their surface nitrogen abundances. Methods: Using stellar and wind properties derived in a previous VFTS study we computed synthetic spectra for a set of up to 21 N ii-v lines in the optical spectral range, using the non-LTE atmosphere code FASTWIND. We constrained the nitrogen abundance by fitting the equivalent widths of relatively strong lines that are sensitive to changes in the abundance of this element. Given the quality of the data, we constrained the nitrogen abundance in 38 cases; for 34 stars only upper limits could be derived, which includes almost all stars rotating at νesini> 200 km s-1. Results: We analysed the nitrogen abundance as a function of projected rotation rate νesini and confronted it with predictions of rotational mixing. We found a group of N-enhanced slowly-spinning stars that is not in accordance with predictions of rotational mixing in single stars. Among O-type stars with (rotation-corrected) gravities less than log gc = 3.75 this group constitutes 30-40 percent of the population. We found a correlation between nitrogen and helium abundance which is consistent with expectations, suggesting that, whatever the mechanism that brings N to the surface, it displays CNO-processed material. For the rapidly-spinning O-type stars we can only provide upper limits on the nitrogen abundance, which are not in violation with theoretical expectations. Hence, the data cannot be used to test the physics of rotation induced mixing in the regime of high spin rates

  6. The effects of additional black carbon on Arctic sea ice surface albedo: variation with sea ice type and snow cover

    Directory of Open Access Journals (Sweden)

    A. A. Marks

    2013-03-01

    Full Text Available Black carbon in sea ice will decrease sea ice surface albedo through increased absorption of incident solar radiation, exacerbating sea ice melting. Previous literature has reported different albedo responses to additions of black carbon in sea ice and has not considered how a snow cover may mitigate the effect of black carbon in sea ice. Sea ice is predominately snow covered. Visible light absorption and light scattering coefficients are calculated for a typical first year and multi-year sea ice and "dry" and "wet" snow types that suggest black carbon is the dominating absorbing impurity. The albedo response of first year and multi-year sea ice to increasing black carbon, from 1–1024 ng g−1, in a top 5 cm layer of a 155 cm thick sea ice was calculated using the radiative transfer model: TUV-snow. Sea ice albedo is surprisingly unresponsive to black carbon additions up to 100 ng g−1 with a decrease in albedo to 98.7% of the original albedo value due to an addition of 8 ng g−1 of black carbon in first year sea ice compared to an albedo decrease to 99.6% for the same black carbon mass ratio increase in multi-year sea ice. The first year sea ice proved more responsive to black carbon additions than the multi-year ice. Comparison with previous modelling of black carbon in sea ice suggests a more scattering sea ice environment will be less responsive to black carbon additions. Snow layers on sea ice may mitigate the effects of black carbon in sea ice. "Wet" and "dry" snow layers of 0.5, 1, 2, 5 and 10 cm were added onto the sea ice surface and the snow surface albedo calculated with the same increase in black carbon in the underlying sea ice. Just a 0.5 cm layer of snow greatly diminishes the effect of black carbon on surface albedo, and a 2–5 cm layer (less than half the e-folding depth of snow is enough to "mask" any change in surface albedo owing to additional black carbon in sea ice, but not thick enough to ignore the underlying sea ice.

  7. Development of a surface plasmon resonance biosensing approach for the rapid detection of porcine circovirus type2 in sample solutions.

    Directory of Open Access Journals (Sweden)

    Jiandong Hu

    Full Text Available A sensitive and label-free analytical approach for the detection of porcine circovirus type 2 (PCV2 instead of PCV2 antibody in serum sample was systematically investigated in this research based on surface plasmon resonance (SPR with an establishment of special molecular identification membrane. The experimental device for constructing the biosensing analyzer is composed of an integrated biosensor, a home-made microfluidic module, and an electrical control circuit incorporated with a photoelectric converter. In order to detect the PCV2 using the surface plasmon resonance immunoassay, the mercaptopropionic acid has been used to bind the Au film in advance through the known form of the strong S-Au covalent bonds formed by the chemical radical of the mercaptopropionic acid and the Au film. PCV2 antibodies were bonded with the mercaptopropionic acid by covalent -CO-NH- amide bonding. For the purpose of evaluating the performance of this approach, the known concentrations of PCV2 Cap protein of 10 µg/mL, 7.5 µg/mL, 5 µg/mL, 2.5 µg/mL, 1 µg/mL, and 0.5 µg/mL were prepared by diluting with PBS successively and then the delta response units (ΔRUs were measured individually. Using the data collected from the linear CCD array, the ΔRUs gave a linear response over a wide concentration range of standard known concentrations of PCV2 Cap protein with the R-Squared value of 0.99625. The theoretical limit of detection was calculated to be 0.04 µg/mL for the surface plasmon resonance biosensing approach. Correspondingly, the recovery rate ranged from 81.0% to 89.3% was obtained. In contrast to the PCV2 detection kits, this surface plasmon resonance biosensing system was validated through linearity, precision and recovery, which demonstrated that the surface plasmon resonance immunoassay is reliable and robust. It was concluded that the detection method which is associated with biomembrane properties is expected to contribute much to determine the PCV2

  8. Development of a surface plasmon resonance biosensing approach for the rapid detection of porcine circovirus type2 in sample solutions.

    Science.gov (United States)

    Hu, Jiandong; Wang, Tingting; Wang, Shun; Chen, Mingwen; Wang, Manping; Mu, Linying; Chen, Hongyin; Hu, Xinran; Liang, Hao; Zhu, Juanhua; Jiang, Min

    2014-01-01

    A sensitive and label-free analytical approach for the detection of porcine circovirus type 2 (PCV2) instead of PCV2 antibody in serum sample was systematically investigated in this research based on surface plasmon resonance (SPR) with an establishment of special molecular identification membrane. The experimental device for constructing the biosensing analyzer is composed of an integrated biosensor, a home-made microfluidic module, and an electrical control circuit incorporated with a photoelectric converter. In order to detect the PCV2 using the surface plasmon resonance immunoassay, the mercaptopropionic acid has been used to bind the Au film in advance through the known form of the strong S-Au covalent bonds formed by the chemical radical of the mercaptopropionic acid and the Au film. PCV2 antibodies were bonded with the mercaptopropionic acid by covalent -CO-NH- amide bonding. For the purpose of evaluating the performance of this approach, the known concentrations of PCV2 Cap protein of 10 µg/mL, 7.5 µg/mL, 5 µg/mL, 2.5 µg/mL, 1 µg/mL, and 0.5 µg/mL were prepared by diluting with PBS successively and then the delta response units (ΔRUs) were measured individually. Using the data collected from the linear CCD array, the ΔRUs gave a linear response over a wide concentration range of standard known concentrations of PCV2 Cap protein with the R-Squared value of 0.99625. The theoretical limit of detection was calculated to be 0.04 µg/mL for the surface plasmon resonance biosensing approach. Correspondingly, the recovery rate ranged from 81.0% to 89.3% was obtained. In contrast to the PCV2 detection kits, this surface plasmon resonance biosensing system was validated through linearity, precision and recovery, which demonstrated that the surface plasmon resonance immunoassay is reliable and robust. It was concluded that the detection method which is associated with biomembrane properties is expected to contribute much to determine the PCV2 in sample

  9. Sternal Reconstruction of Deep Sternal Wound Infections Following Median Sternotomy by Single-stage Muscle Flaps Transposition

    Institute of Scientific and Technical Information of China (English)

    Ji-yan Xie

    2014-01-01

    Objective To assess clinical effectiveness of using bilateral pectoralis major or plus rectus abdominis muscle flaps in treating deep sternal wound infection (DSWI) following median sternotomy. Methods Between January 2009 and December 2013, 19 patients with DSWI after median sternotomy for cardiac surgery were admitted to our hospital, including 14 males (73.7%) and 5 females (26.3%), aged 55±13 (18-78) years. According to the Pairolero classification of infected median sternotomies, 3 (15.8%) patients were type II, and the other 16 (84.2%) were type III. Surgical procedure consisted of adequate debridement of infected sternum, costal cartilage, granulation, steel wires, suture residues and other foreign substances. Sternal reconstruction used the bilateral pectoralis major or plus rectus abdominis muscle flaps to obliterate dead space. The drainage tubes were placed and connected to a negative pressure generator for adequate drainage. Results There were no intraoperative deaths. In 15 patients (78.9%), bilateral pectoral muscle flaps were mobilized sufficiently to cover and stabilize the defect created by wound debridement. 4 patients (21.0%) needed bilateral pectoral muscle flaps plus rectus abdominis muscle flaps because their pectoralis major muscle flaps could not reach the lowest portion of the wound. 2 patients (10.5%) presented with subcutaneous infection, and 3 patients (15.8%) had hematoma. They recovered following local debridement and medication. 17 patients (89.5%) were examined at follow-up 12 months later, all healed and having stable sternum. No patients showed infection recurrence during the follow-up period over 12 months. Conclusion DSWI following median sternotomy may be effectively managed with adequate debridement of infected tissues and reconstruction with bilateral pectoralis major muscle or plus rectus abdominis muscle flap transposition.

  10. A New Aspergillus fumigatus Typing Method Based on Hypervariable Tandem Repeats Located within Exons of Surface Protein Coding Genes (TRESP).

    Science.gov (United States)

    Garcia-Rubio, Rocio; Gil, Horacio; Monteiro, Maria Candida; Pelaez, Teresa; Mellado, Emilia

    2016-01-01

    Aspergillus fumigatus is a saprotrophic mold fungus ubiquitously found in the environment and is the most common species causing invasive aspergillosis in immunocompromised individuals. For A. fumigatus genotyping, the short tandem repeat method (STRAf) is widely accepted as the first choice. However, difficulties associated with PCR product size and required technology have encouraged the development of novel typing techniques. In this study, a new genotyping method based on hypervariable tandem repeats within exons of surface protein coding genes (TRESP) was designed. A. fumigatus isolates were characterized by PCR amplification and sequencing with a panel of three TRESP encoding genes: cell surface protein A; MP-2 antigenic galactomannan protein; and hypothetical protein with a CFEM domain. The allele sequence repeats of each of the three targets were combined to assign a specific genotype. For the evaluation of this method, 126 unrelated A. fumigatus strains were analyzed and 96 different genotypes were identified, showing a high level of discrimination [Simpson's index of diversity (D) 0.994]. In addition, 49 azole resistant strains were analyzed identifying 26 genotypes and showing a lower D value (0.890) among them. This value could indicate that these resistant strains are closely related and share a common origin, although more studies are needed to confirm this hypothesis. In summary, a novel genotyping method for A. fumigatus has been developed which is reproducible, easy to perform, highly discriminatory and could be especially useful for studying outbreaks.

  11. A New Aspergillus fumigatus Typing Method Based on Hypervariable Tandem Repeats Located within Exons of Surface Protein Coding Genes (TRESP)

    Science.gov (United States)

    Garcia-Rubio, Rocio; Gil, Horacio; Monteiro, Maria Candida; Pelaez, Teresa; Mellado, Emilia

    2016-01-01

    Aspergillus fumigatus is a saprotrophic mold fungus ubiquitously found in the environment and is the most common species causing invasive aspergillosis in immunocompromised individuals. For A. fumigatus genotyping, the short tandem repeat method (STRAf) is widely accepted as the first choice. However, difficulties associated with PCR product size and required technology have encouraged the development of novel typing techniques. In this study, a new genotyping method based on hypervariable tandem repeats within exons of surface protein coding genes (TRESP) was designed. A. fumigatus isolates were characterized by PCR amplification and sequencing with a panel of three TRESP encoding genes: cell surface protein A; MP-2 antigenic galactomannan protein; and hypothetical protein with a CFEM domain. The allele sequence repeats of each of the three targets were combined to assign a specific genotype. For the evaluation of this method, 126 unrelated A. fumigatus strains were analyzed and 96 different genotypes were identified, showing a high level of discrimination [Simpson’s index of diversity (D) 0.994]. In addition, 49 azole resistant strains were analyzed identifying 26 genotypes and showing a lower D value (0.890) among them. This value could indicate that these resistant strains are closely related and share a common origin, although more studies are needed to confirm this hypothesis. In summary, a novel genotyping method for A. fumigatus has been developed which is reproducible, easy to perform, highly discriminatory and could be especially useful for studying outbreaks. PMID:27701437

  12. Low specific contact resistance on epitaxial p-type 4H-SiC with a step-bunching surface

    Institute of Scientific and Technical Information of China (English)

    韩超; 张玉明; 宋庆文; 汤晓燕; 张义门; 郭辉; 王悦湖

    2015-01-01

    This paper reports the performances of Ti/Al based ohmic contacts fabricated on highly doped p-type 4H-SiC epitaxial layer which has a severe step-bunching surface. Different contact schemes are investigated based on the Al:Ti composition with no more than 50 at.%Al. The specific contact resistance (SCR) is obtained to be as low as 2.6 × 10−6Ω·cm2 for the bilayered Ti(100 nm)/Al(100 nm) contact treated with 3 min rapid thermal annealing (RTA) at 1000◦C. The microstructure analyses examined by physical and chemical characterization techniques reveal an alloy-assisted ohmic contact formation mechanism, i.e., a high degree of alloying plays a decisive role in forming the interfacial ternary Ti3SiC2 dominating the ohmic behavior of the Ti/Al based contact. Furthermore, a globally covered Ti3SiC2 layer with (0001)-oriented texture can be formed, regardless of the surface step bunching as well as its structural evolution during the metallization annealing.

  13. Tuning the surface Fermi level on p-type gallium nitride nanowires for efficient overall water splitting.

    Science.gov (United States)

    Kibria, M G; Zhao, S; Chowdhury, F A; Wang, Q; Nguyen, H P T; Trudeau, M L; Guo, H; Mi, Z

    2014-04-30

    Solar water splitting is one of the key steps in artificial photosynthesis for future carbon-neutral, storable and sustainable source of energy. Here we show that one of the major obstacles for achieving efficient and stable overall water splitting over the emerging nanostructured photocatalyst is directly related to the uncontrolled surface charge properties. By tuning the Fermi level on the nonpolar surfaces of gallium nitride nanowire arrays, we demonstrate that the quantum efficiency can be enhanced by more than two orders of magnitude. The internal quantum efficiency and activity on p-type gallium nitride nanowires can reach ~51% and ~4.0 mol hydrogen h(-1) g(-1), respectively. The nanowires remain virtually unchanged after over 50,000 μmol gas (hydrogen and oxygen) is produced, which is more than 10,000 times the amount of photocatalyst itself (~4.6 μmol). The essential role of Fermi-level tuning in balancing redox reactions and in enhancing the efficiency and stability is also elucidated.

  14. Discovery of starspots on Vega - First spectroscopic detection of surface structures on a normal A-type star

    CERN Document Server

    Böhm, T; Lignières, F; Petit, P; Rainer, M; Paletou, F; Wade, G; Alecian, E; Carfantan, H; Blazère, A; Mirouh, G M

    2014-01-01

    The theoretically studied impact of rapid rotation on stellar evolution needs to be confronted with the results of high resolution spectroscopy-velocimetry observations. A weak surface magnetic field had recently been detected in the A0 prototype star Vega, potentially leading to a (yet undetected) structured surface. The goal of this article is to present a thorough analysis of the line profile variations and associated estimators in the early-type standard star Vega (A0) in order reveal potential activity tracers, exoplanet companions and stellar oscillations. Vega was monitored in high-resolution spectroscopy with the velocimeter Sophie/OHP. A total of 2588 high S/N spectra was obtained during 5 nights (August 2012) at R = 75000 and covering the visible domain. For each reduced spectrum, Least Square Deconvolved (LSD) equivalent photospheric profiles were calculated with a Teff = 9500 and logg = 4.0 spectral line mask. Several methods were applied to study the dynamic behavior of the profile variations (ev...

  15. New method of immobilization of microbial cells by capture on the surface of insoluble pyridinium-type resin.

    Science.gov (United States)

    Kawabata, N; Nishimura, S; Yoshimura, T

    1990-04-25

    A new method for the immobilization of microbial cells has been developed. Whole cells of Escherichia coli with aspartase activity were immobilized by capture on the surface of cross-linked poly(N-benzyl-4-vinylpyridinium bromide) containing styrene (BVPS resin), an insoluble pyridinium-type resin. When a suspension of the bacterial cells in buffer solution was passed through a glass column containing beads of BVPS resin, the cells were captured on the resin surface and formed an immobilized cell system. A fixed-bed column reactor containing 300 mg of the bacterial cells immobilized by capture on 10 g of BVPS resin beads was used for the preparation of L-aspartic acid from ammonium fumarate. Continuous operation of tne bioreactor produced L-aspartic acid in a quantitative yield when the influent substrate concentration was 0.1M and the flow rate was 0.41-0.83 bed volumes per hour at pH 7.4-7.7 at 30 degrees C.

  16. The evolution of surface magnetic fields in young solar-type stars I: the first 250 Myr

    CERN Document Server

    Folsom, C P; Bouvier, J; Lèbre, A; Amard, L; Palacios, A; Morin, J; Donati, J -F; Jeffers, S V; Marsden, S C; Vidotto, A A

    2016-01-01

    The surface rotation rates of young solar-type stars vary rapidly with age from the end of the pre-main sequence through the early main sequence. Important changes in the dynamos operating in these stars may result from this evolution, which should be observable in their surface magnetic fields. Here we present a study aimed at observing the evolution of these magnetic fields through this critical time period. We observed stars in open clusters and stellar associations of known ages, and used Zeeman Doppler Imaging to characterize their complex magnetic large-scale fields. Presented here are results for 15 stars, from 5 associations, with ages from 20 to 250 Myr, masses from 0.7 to 1.2 solar masses, and rotation periods from 0.4 to 6 days. We find complex large-scale magnetic field geometries, with global average strengths from 14 to 140 G. There is a clear trend towards decreasing average large-scale magnetic field strength with age, and a tight correlation between magnetic field strength and Rossby number. ...

  17. Application of a Winch-type Towed Acoustic Sensor to a Wave-powered Unmanned Surface Vehicle

    Directory of Open Access Journals (Sweden)

    Taejun Moh

    2016-12-01

    Full Text Available Although many countries have focused on anti-submarine warfare for several decades, underwater submarines can hardly be detected by current assets such as patrol aircraft, surface ships and fixed underwater surveillance systems. Due to the difficult conditions of the oceanic environment and the relative quietness of submarines, existing acoustic surveillance platforms are not able to fully cover their mission areas. To fill in the gaps, a winch-type towed acoustic sensor system was developed and integrated into a wave-powered unmanned surface vehicle by the Korea Institute of Ocean Science and Technology. In June 2015, sea trial tests were conducted to verify maneuvering, acoustic signal detection, and communication capabilities. During the maneuvering test, the wave-powered glider successfully moved along programmed waypoints. Despite towing the acoustic sensor system, only 20% of initial electricity was consumed in 20 days. The acoustic sensor was lowered to depths of 100–150 m by the winch system, and received signals from an acoustic simulator lowered to depths of 50–100 m by RV Jangmok. Simulated submarine noises that were refracted downward could be clearly received and classified by the hydrophone system, from distances of 2–8 km, while it was being towed silently and deeply. In addition, an optical camera provided high-resolution images of surface vessels, allowing integration with acoustic detection of underwater objects. In conclusion, this new platform using a deeply towed hydrophone system is worthy of consideration as an underwater surveillance asset. Future work is required to strengthen inter-asset communication and obstacle avoidance, and to overcome strong currents to make this technology a reliable part of the underwater surveillance network.

  18. Median and ulnar nerve injuries: prognosis and predictors for clinical outcome

    NARCIS (Netherlands)

    J.B. Jaquet (Jean)

    2004-01-01

    textabstractIn chapter 1 the author provide a general introduction on median and ulnar nerve injuries. Furthermore the aims for this thesis, entitled median and ulnar nerve injuries: prognosis and predictors for clinical outcome, are defi ned. Chapter 2 comprises an investigation into the overall fu

  19. Median sternotomy for double lung transplantation with cardiopulmonary bypass in seven consecutive patients

    DEFF Research Database (Denmark)

    Kohno, Mitsutomo; Steinbrüchel, Daniel A

    2012-01-01

    We describe our technique of using median sternotomy to perform double lung transplantations with cardiopulmonary bypass. By sparing the respiratory muscles, median sternotomy is probably less invasive and preserves lung function. Furthermore, it causes less long-term discomfort than intercostal...

  20. The median of the distance between two leaves in a phylogenetic tree

    CERN Document Server

    Mir, Arnau

    2010-01-01

    We establish a limit formula for the median of the distance between two leaves in a fully resolved unrooted phylogenetic tree with n leaves. More precisely, we prove that this median is equal, in the limit, to the square root of 4*ln(2)*n.

  1. In vivo three-dimensional reconstruction of human median nerves by diffusion tensor imaging

    NARCIS (Netherlands)

    Meek, MF; Stenekes, MW; Hoogduin, HM; Nicolai, JPA

    2006-01-01

    The in vivo assessment of axonal projections of the peripheral nervous system has been severely limited by the lack of noninvasive techniques. We examined whether MR diffusion tensor imaging with fiber tracking of the human median nerve is feasible. The median nerve was examined with a 3-T MRI scann

  2. Electromyogram median power frequency in dynamic exercise at medium exercise intensities

    NARCIS (Netherlands)

    Ament, W; Bonga, GJJ; Hof, AL; Verkerke, GJ

    1996-01-01

    The electromyogram (EMG) median power Frequency of the calf muscles was investigated during an exhausting treadmill exercise and a 20-min recovery period. The exercise was an uphill run at a speed of 5 km . h(-1) and a gradient of 20%. During exercise there was no decrease of EMG median power freque

  3. Magnetic resonance neurography of median neuropathies proximal to the carpal tunnel

    Energy Technology Data Exchange (ETDEWEB)

    Thawait, Gaurav K. [Johns Hopkins Hospital, The Russell H. Morgan Department of Radiology and Radiological Science, Baltimore, MD (United States); The Johns Hopkins Hospital, Russell H. Morgan Department of Radiology and Radiological Science, Baltimore, MD (United States); Subhawong, Ty K.; Eng, John; Carrino, John A.; Chhabra, Avneesh [Johns Hopkins Hospital, The Russell H. Morgan Department of Radiology and Radiological Science, Baltimore, MD (United States); Thawait, Shrey K. [Yale University, Bridgeport Hospital, Department of Radiology, Bridgeport, CT (United States); Andreisek, Gustav [University Hospital Zurich, Department of Radiology, Zurich (Switzerland); Belzberg, Alan J. [Johns Hopkins Hospital, Department of Neurosurgery, Baltimore, MD (United States)

    2012-06-15

    This review provides magnetic resonance neurography (MRN) imaging appearances of median neuropathy proximal to the carpal tunnel. Carpal tunnel syndrome (CTS) and its imaging have been extensively described in the literature; however, there is a relative paucity of information on the MR imaging appearances of different pathologies of the median nerve proximal to the carpal tunnel. (orig.)

  4. Shadow Probability of Detection and False Alarm for Median-Filtered SAR Imagery

    Energy Technology Data Exchange (ETDEWEB)

    Raynal, Ann Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). ISR Analysis and Applications Dept.; Doerry, Armin Walter [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). ISR Mission Engineering Dept.; Miller, John A. [General Atomics Aeronautical Systems, Inc., San Diego, CA (United States). Mission Systems; Bishop, Edward E. [General Atomics Aeronautical Systems, Inc., San Diego, CA (United States). Mission Systems; Horndt, Volker [General Atomics Aeronautical Systems, Inc., San Diego, CA (United States). Mission Systems

    2014-06-01

    Median filtering reduces speckle in synthetic aperture radar (SAR) imagery while preserving edges, at the expense of coarsening the resolution, by replacing the center pixel of a sliding window by the median value. For shadow detection, this approach helps distinguish shadows from clutter more easily, while preserving shadow shape delineations. However, the nonlinear operation alters the shadow and clutter distributions and statistics, which must be taken into consideration when computing probability of detection and false alarm metrics. Depending on system parameters, median filtering can improve probability of detection and false alarm by orders of magnitude. Herein, we examine shadow probability of detection and false alarm in a homogeneous, ideal clutter background after median filter post-processing. Some comments on multi-look processing effects with and without median filtering are also made.

  5. Surface, optical characteristics and photocatalytic ability of Scheelite-type monoclinic Bi3FeMo2O12 nanoparticles

    Science.gov (United States)

    Nie, Xinming; Wulayin, Wumitijiang; Song, Tingting; Wu, Minxiao; Qiao, Xuebin

    2016-11-01

    Bi3FeMo2O12 nanoparticles with the Scheelite-type monoclinic structure were prepared by the Pechini synthesis. The Bi3FeMo2O12 nanoparticle has a size of about 50 nm. The phase formation and structural characteristic were studied by X-ray diffraction (XRD) patterns and Rietveld refinements. The Scheelite framework is characterized by a superstructure constructed by the ordered arrangement of Fe/Mo tetrahedral on the B sites. The surface characteristics of Bi3FeMo2O12 nanoparticles were studied by the measurements such as the scanning electron microscope (SEM), the transmission electron microscopy (TEM), and the N2-adsorption-desorption isotherm. Bi3FeMo2O12 nanoparticles present an efficient optical absorption in a wide wavelength region from UV to 540 nm. The band gap energy was decided to be 2.3 eV and characterized by a direct allowed electronic optical transition. The photocatalytic activity of Bi3FeMo2O12 nanoparticles was confirmed by the photodegradation of the rhodamine B (RhB) dye solution. The experiments indicate that the Scheelite-type molybdate could be a potential candidate of a visible-light-driven photocatalyst.

  6. High Dispersion Spectroscopy of Solar-type Superflare Stars. I. Temperature, Surface Gravity, Metallicity, and $v \\sin i$

    CERN Document Server

    Notsu, Yuta; Maehara, Hiroyuki; Notsu, Shota; Shibayama, Takuya; Nogami, Daisaku; Shibata, Kazunari

    2014-01-01

    We conducted high dispersion spectroscopic observations of 50 superflare stars with Subaru/HDS, and measured the stellar parameters of them. These 50 targets were selected from the solar-type (G-type main sequence) superflare stars that we had discovered from the Kepler photometric data. As a result of these spectroscopic observations, we found that more than half (34 stars) of our 50 targets have no evidence of binary system. We then estimated effective temperature ($T_{\\rm{eff}}$), surface gravity ($\\log g$), metallicity ([Fe/H]), and projected rotational velocity ($v\\sin i$) of these 34 superflare stars on the basis of our spectroscopic data. The accuracy of our estimations is higher than that of Kepler Input Catalog (KIC) values, and the differences between our values and KIC values ($(\\Delta T_{\\rm{eff}})_{\\rm{rms}} \\sim 219$K, $(\\Delta \\log g)_{\\rm{rms}} \\sim 0.37$ dex, and $(\\Delta\\rm{[Fe/H]})_{\\rm{rms}} \\sim 0.46$ dex) are comparable to the large uncertainties and systematic differences of KIC values ...

  7. VEGAS: A VST Early-type GAlaxy Survey. I. Presentation, wide-field surface photometry, and substructures in NGC 4472

    CERN Document Server

    Capaccioli, Massimo; Grado, Aniello; Iodice, Enrichetta; Limatola, Luca; Napolitano, Nicola R; Cantiello, Michele; Paolillo, Maurizio; Romanowsky, Aaron J; Forbes, Duncan A; Puzia, Thomas H; Raimondo, Gabriella; Schipani, Pietro

    2015-01-01

    We present the VST Early-type GAlaxy Survey (VEGAS), which is designed to obtain deep multiband photometry in g, r, i, of about one hundred nearby galaxies down to 27.3, 26.8, and 26 mag/arcsec^2 respectively, using the ESO facility VST/OmegaCAM.} The goals of the survey are 1) to map the light distribution up to ten effective radii, r_e, 2) to trace color gradients and surface brightness fluctuation gradients out to a few r_e for stellar population characterization, and 3) to obtain a full census of the satellite systems (globular clusters and dwarf galaxies) out to 20% of the galaxy virial radius. The external regions of galaxies retain signatures of the formation and evolution mechanisms that shaped them, and the study of nearby objects enables a detailed analysis of their morphology and interaction features. To clarify the complex variety of formation mechanisms of early-type galaxies (ETGs), wide and deep photometry is the primary observational step, which at the moment has been pursued with only a few d...

  8. Design and Development of Surface Modified p and n Type Silicon Sensor for Nitrogen Gas Flow Measurement

    CERN Document Server

    Satheesh, U; Devaprakasam, D

    2014-01-01

    We report a gas flow driven voltage generation of Octyltrichlorosilane (OTS) molecules self assembled on silicon wafers (Si wafers). OTS Self assembled Monolayer (SAM) has been coated on both p-type and n-type doped silicon wafers (p-Si and n-Si wafers) using dip coating method. We have measured the flow induced voltage generation on OTS SAM coated Si wafers/ Uncoated Si wafers at modest gas flow velocities of subsonic regime (Mach number < 0.2) using national instruments NI-PXI-1044 Workstation. The gas flow driven voltage generation is mainly due to the interplay mechanisms of Bernoulli principle and Seebeck effect. The surface morphology of OTS SAM coated p-Si and n-Si wafers were characterized by SEM analysis. In this study, our results shows that OTS SAM coated p-Si and n-Si wafers shows better sensitivity towards nitrogen gas flow when compared with the uncoated Si wafers. OTS SAM also exhibits high thermal stability and hydrophobicity.

  9. Airborne Spectral BRDF of Various Surface Types (Ocean, Vegetation, Snow, Desert, Wetlands, Cloud Decks, Smoke Layers) for Remote Sensing Applications

    Science.gov (United States)

    Gatebe, Charles K.; King, Michael D.

    2016-01-01

    In this paper we describe measurements of the bidirectional reflectance-distribution function (BRDF) acquired over a 30-year period (1984-2014) by the National Aeronautics and Space Administration's (NASA's) Cloud Absorption Radiometer (CAR). Our BRDF database encompasses various natural surfaces that are representative of many land cover or ecosystem types found throughout the world. CAR's unique measurement geometry allows a comparison of measurements acquired from different satellite instruments with various geometrical configurations, none of which are capable of obtaining such a complete and nearly instantaneous BRDF. This database is therefore of great value in validating many satellite sensors and assessing corrections of reflectances for angular effects. These data can also be used to evaluate the ability of analytical models to reproduce the observed directional signatures, to develop BRDF models that are suitable for sub-kilometer-scale satellite observations over both homogeneous and heterogeneous landscape types, and to test future spaceborne sensors. All of these BRDF data are publicly available and accessible in hierarchical data format (http:car.gsfc.nasa.gov/).

  10. Design of New-type Composite Surface Anvil%新型复合曲面型砧的设计

    Institute of Scientific and Technical Information of China (English)

    李静; 孟祥龙; 柴民杰; 于晶晶

    2011-01-01

    Taking large-scale steel ingot forging process as study object, a new-type compound surface anvil was innovatively designed to forge forgings. Using nonlinear finite element and physical analogue experimental technique, the uniformity of the internal structure deformation in heavy forgings was researched by theory modeling and numerical simulation to find the internal stress and strain state in the heavy forgings with different shape anvils. Taking DEFORM as platform, the forging progress with new-type compound surface anvil was simulated by finite element method; thinking of the primary factors of influencing forging effect, such as anvil width ratio, anvil's angle and the altitude of mirror image line, the different geometric parameters were designed to find the best geometric parameters with the compound surface anvil.%以大型钢锭锻造过程为研究对象,创新设计一种新型复合曲面型砧对锻件进行锻造;采用非线性有限元和物理模拟实验方法,通过理论建模和数值模拟,对大锻件内部组织变形的均匀性进行研究,以求找出在用不同形状砧子进行锻造时.锻件内部的应力、应变状态.以DEFORM软件为平台,对新型复合曲面型砧的锻造过程进行有限元模拟:根据影响锻造效果的主要因素砧宽比、型砧角度和设计复合曲面型砧所需的镜像线高度,特设计几种不同几何参数的工况,以求解出复合曲面型砧的最佳几何参数.

  11. Very low surface recombination velocities on p- and n-type c-Si by ultrafast spatial atomic layer deposition of aluminum oxide

    NARCIS (Netherlands)

    Werner, F.; Veith, B.; Tiba, V.; Poodt, P.W.G.; Roozeboom, F.; Brendel, R.; Schmidt, J.

    2010-01-01

    Using aluminum oxide (Al2 O3) films deposited by high-rate spatial atomic layer deposition (ALD), we achieve very low surface recombination velocities of 6.5 cm/s on p -type and 8.1 cm/s on n -type crystalline silicon wafers. Using spatially separated reaction zones instead of

  12. Laser Therapy After Repair of the Distal Half of the Median Nerve; a Comparative Study

    Directory of Open Access Journals (Sweden)

    Seyed Forootan

    2015-05-01

    Full Text Available Background Nerve injuries resulting from major or minor trauma often cause some disabilities for patients. Neurotmesis, characterized by complete anatomical rupture of the nerve, is the most severe form of the injury which will not recover without reconstructive surgery and nowadays such neural damages are improved by microsurgical procedures. Some studies have used low power laser for nerve cell growth in order to improve the rehabilitation results of peripheral nerves. Low power laser can complement the reformation of postsurgical nerve injuries. Objectives The current study aimed to assess the effects of laser therapy after repair of median nerve rupture in the distal third of the forearm and to compare the results with that of the standard method. Patients and Methods The current study was a case-control clinical trial of 36 patients with volar surface rupture of the distal third of forearm admitted to the emergency ward of Hazrat-e-Fatemeh Hospital within 72 hours of injury, they had anesthesia in the first, second, and third fingers as a result of Median Nerve Injury. Patients were divided into two groups. The first group included subjects treated with standard methods and the second group included those treated with low power laser therapy (LT along with the standard method. The same surgeon operated the subjects in the two groups. The second group underwent 10 sessions of LT every other day. Clinical Examination, Electromyography and Nerve Conduction Velocity (NCV were done after six months and the results were compared. Results In the two -point discrimination- test, there was no significant difference between the two groups in the thumbs but a significant improvement was observed in the index finger of the LT group. Improvement of muscular examinations such as opposition and thumb abduction supported the usage of laser in the second group. Regarding electromyography and NCV, significant statistical difference was observed in the motor

  13. Assessment of Median Nerve Mobility by Ultrasound Dynamic Imaging for Diagnosing Carpal Tunnel Syndrome.

    Directory of Open Access Journals (Sweden)

    Tai-Tzung Kuo

    Full Text Available Carpal tunnel syndrome (CTS is the most common peripheral neuropathy and is characterized by median nerve entrapment at the wrist and the resulting median nerve dysfunction. CTS is diagnosed clinically as the gold standard and confirmed with nerve conduction studies (NCS. Complementing NCS, ultrasound imaging could provide additional anatomical information on pathological and motion changes of the median nerve. The purpose of this study was to estimate the transverse sliding patterns of the median nerve during finger movements by analyzing ultrasound dynamic images to distinguish between normal subjects and CTS patients. Transverse ultrasound images were acquired, and a speckle-tracking algorithm was used to determine the lateral displacements of the median nerve in radial-ulnar plane in B-mode images utilizing the multilevel block-sum pyramid algorithm and averaging. All of the averaged lateral displacements at separate acquisition times within a single flexion-extension cycle were accumulated to obtain the cumulative lateral displacements, which were curve-fitted with a second-order polynomial function. The fitted curve was regarded as the transverse sliding pattern of the median nerve. The R2 value, curvature, and amplitude of the fitted curves were computed to evaluate the goodness, variation and maximum value of the fit, respectively. Box plots, the receiver operating characteristic (ROC curve, and a fuzzy c-means clustering algorithm were utilized for statistical analysis. The transverse sliding of the median nerve during finger movements was greater and had a steeper fitted curve in the normal subjects than in the patients with mild or severe CTS. The temporal changes in transverse sliding of the median nerve within the carpal tunnel were found to be correlated with the presence of CTS and its severity. The representative transverse sliding patterns of the median nerve during finger movements were demonstrated to be useful for

  14. Pivotal role of median eminence tanycytes for hypothalamic function and neurogenesis.

    Science.gov (United States)

    Rizzoti, Karine; Lovell-Badge, Robin

    2017-04-15

    Along with the sub-ventricular zone of the forebrain lateral ventricles and the sub-granular zone of the dentate gyrus in the hippocampus, the hypothalamus has recently emerged as a third gliogenic and neurogenic niche in the central nervous system. The hypothalamus is the main regulator of body homeostasis because it centralizes peripheral information to regulate crucial physiological functions through the pituitary gland and the autonomic nervous system. Its ability to sense signals originating outside the brain relies on its exposure to blood-born molecules through the median eminence, which is localized outside the blood brain barrier. Within the hypothalamus, a population of specialized radial glial cells, the tanycytes, control exposure to blood-born signals by acting both as sensors and regulators of the hypothalamic input and output. In addition, lineage-tracing experiments have recently revealed that tanycytes represent a population of hypothalamic stem cells, defining them as a pivotal cell type within the hypothalamus. Hypothalamic neurogenesis has moreover been shown to have an important role in feeding control and energy metabolism, which challenges previous knowledge and offers new therapeutic options.

  15. Enhancement of multichannel chromosome classification using a region-based classifier and vector median filtering.

    Science.gov (United States)

    Karvelis, Petros S; Fotiadis, Dimitrios I; Tsalikakis, Dimitrios G; Georgiou, Ioannis A

    2009-07-01

    Multichannel chromosome image acquisition is used for cancer diagnosis and research on genetic disorders. This type of imaging, apart from aiding the cytogeneticist in several ways, facilitates the visual detection of chromosome abnormalities. However, chromosome misclassification errors result from different factors, such as uneven hybridization, spectral overlap among fluors, and biochemical noise. In this paper, we enhance the chromosome classification accuracy by making use of a region Bayes classifier that increases the classification accuracy when compared to the already developed pixel-by-pixel classifier and by incorporating the vector median filtering approach for filtering of the image. The method is evaluated using a publicly available database that contains 183 six-channel chromosome sets of images. The overall improvement on the chromosome classification accuracy is 9.99%, compared to the pixel-by-pixel classifier without filtering. This improvement in the chromosome classification accuracy would allow subtle deoxyribonucleic acid abnormalities to be identified easily. The efficiency of the method might further improve by using features extracted from each region and a more sophisticated classifier.

  16. Median cleft of the upper lip: A new classification to guide treatment decisions.

    Science.gov (United States)

    de Boutray, Marie; Beziat, Jean-Luc; Yachouh, Jacques; Bigorre, Michèle; Gleizal, Arnaud; Captier, Guillaume

    2016-06-01

    Median cleft of the upper lip (MCL) is a specific and rare entity on the spectrum of facial clefts. MCL have different clinical expressions and can be either isolated or part of multiple malformations. Confusion still exists regarding the explanation and classification of MCL; some cases have been reported in the literature, but no studies carried out a complete review of the literature. This study reviewed cases of MCL in 2 French units and conducted a systematic review of the literature, in order to derive a new classification. Fourteen patients with MCL in the 2 units and 195 cases in the literature were reviewed. They involved complete (42%), incomplete (49%), and minor forms (9%). Epidemiological and clinical data were collected, from which a classification was derived, based on the type of cleft and its belonging to other syndrome(s). Three main groups were distinguished, namely, isolated MCL, MCL within craniofacial malformations, and MCL with extrafacial malformations. Each group and subgroup was associated with a prognosis and led to specific management. This study reviewed all of the various forms of MCL and their associated anomalies, in order to have a global view of MCL and to derive a useful classification scheme to guide management of care. Copyright © 2016 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  17. Does retraction of the sternum during median sternotomy result in brachial plexus injuries?

    Science.gov (United States)

    Healey, Scott; O'Neill, Bridie; Bilal, Haris; Waterworth, Paul

    2013-07-01

    A best evidence topic in cardiac surgery was written according to a structured protocol. The question addressed was 'does retraction of the sternum during median sternotomy result in brachial plexus injuries or peripheral neuropathies?' Altogether 58 papers were found using the reported search, of which 12 represented the best evidence to answer the question. The authors, date, journal and country of publication, patient group studied, study type, relevant outcomes and results of these papers were tabulated. Caudal placement of the retractor or relieving the pressure superiorly by removing the upper blades of a retractor (P = 0.02) and use of a caudally placed symmetrical retractor has been shown to reduce neuropathy. Positioning of the patient with 'hands up' positioning showed significant reduction in the incidence of brachial plexus injuries. Furthermore, how wide the retractor is opened and use of an asymmetrical retractor for internal mammary artery (IMA) harvesting are also important factors in quantifying risk of postoperative neuropathy. Wider sternal retraction and longer bypass time did increase the risk of developing postoperative neuropathy. Three asymmetrical retractors were looked at that demonstrates the Delacroix-Chevalier to be the safest (P retractor and using a caudally placed retractor.

  18. The effects of surface roughness and type of denture acrylic on biofilm formation by Streptococcus oralis in a constant depth film fermentor.

    Science.gov (United States)

    Morgan, T D; Wilson, M

    2001-07-01

    To investigate the effects of surface roughness and type of denture acrylic on the early development of a Streptococcus oralis biofilm in a constant depth film fermentor (CDFF). Streptococcus oralis was incubated with acrylic of known surface roughness in the CDFF. Adherent Strep. oralis were enumerated by viable counting. Cold-cure acrylic was rougher (P effect on the number of adherent bacteria. The type of acrylic used, and its roughness, affect the early stages of biofilm formation by Strep. oralis. Choosing an appropriate type of smooth acrylic could lead to reduced biofilm formation in vivo.

  19. Medial septal and median raphe innervation of vasoactive intestinal polypeptide-containing interneurons in the hippocampus.

    Science.gov (United States)

    Papp, E C; Hajos, N; Acsády, L; Freund, T F

    1999-05-01

    Vasoactive intestinal polypeptide-immunoreactive interneurons are known to form three anatomically and neurochemically well-characterized neuron populations in the hippocampus. Two of these establish synaptic contacts selectively with other GABAergic cells (interneuron-selective cells), whereas the third type innervates pyramidal cell bodies and proximal dendrites like a conventional basket cell. Our aim was to examine which of the vasoactive intestinal polypeptide-containing interneuron populations are among the targets of GABAergic septohippocampal and serotonergic raphe-hippocampal pathways. Anterograde tracing with Phaseolus vulgaris leucoagglutinin combined with double immunocytochemistry for vasoactive intestinal polypeptide was used at the light and electron microscopic levels. Our results show that both interneuron-selective cells and vasoactive intestinal polypeptide-containing basket cells receive synaptic input from the medial septum and median raphe nucleus. The GABAergic component of the septohippocampal pathway establishes multiple contacts on both cell types. In the case of the raphe-hippocampal projection, single or double contacts were more frequent on vasoactive intestinal polypeptide-positive interneuron selective cells (76%), whereas multiple contacts predominated on basket cells (83%). The extrinsic GABAergic innervation of interneuron-selective cells in the hippocampus indicates a complex interaction among GABAergic systems, which might ensure the timing and rhythmic synchronization of inhibitory processes in the hippocampus. On the other hand, our results suggest that the serotonergic effect on perisomatic inhibition is exerted via vasoactive intestinal polypeptide-containing basket cells that are functionally distinct from their parvalbumin-positive relatives, which appear to escape control of serotonergic as well as local interneuron-selective cells.

  20. Sosiaalisen median hyödyntäminen hotellin markkinointiviestinnässä

    OpenAIRE

    Veikkolainen, Markus

    2011-01-01

    Sosiaalisen median eli yhteisöllisen median suosio on kasvanut kovaa vauhtia viime vuosina. Maailmanlaajuisesti sosiaalista mediaa käyttää satoja miljoonia ihmisiä päivittäin. Suomessa sosiaalisen median käyttäjiä on reilusti yli miljoona. Sosiaalinen media käsittää internetissä olevat sovellukset, mitkä mahdollistavat ihmisten välisen vapaan tiedon jakamisen ja kommunikoinnin. Tunnetuimpia sovelluksia ovat muun muassa yhteisöpalvelu Facebook sekä videopalvelu Youtube. Monet hotellit ovat hav...

  1. A rare case of mucormycosis of median sternotomy wound caused by Rhizopus arrhizus

    Directory of Open Access Journals (Sweden)

    Chawla R

    2007-01-01

    Full Text Available We describe a case of mucormycosis of median sternotomy wound caused by Rhizopus arrhizus . The patient, a known diabetic and a case of coronary artery disease underwent coronary artery bypass surgery. In the postoperative period, patient developed infection of the median sternotomy wound, from which R. arrhizus was isolated on culture. Patient succumbed in spite of being treated with surgical debridement and amphotericin B. To the best of our knowledge, this is the first reported case of mucormycosis of median sternotomy wound from India.

  2. Median Filter Noise Reduction of Image and Backpropagation Neural Network Model for Cervical Cancer Classification

    Science.gov (United States)

    Wutsqa, D. U.; Marwah, M.

    2017-06-01

    In this paper, we consider spatial operation median filter to reduce the noise in the cervical images yielded by colposcopy tool. The backpropagation neural network (BPNN) model is applied to the colposcopy images to classify cervical cancer. The classification process requires an image extraction by using a gray level co-occurrence matrix (GLCM) method to obtain image features that are used as inputs of BPNN model. The advantage of noise reduction is evaluated by comparing the performances of BPNN models with and without spatial operation median filter. The experimental result shows that the spatial operation median filter can improve the accuracy of the BPNN model for cervical cancer classification.

  3. An improved video median noise reduction algorithm for ambulance vehicle terminal monitoring system

    Science.gov (United States)

    Ma, Xian-Min; Zhang, Hang

    2012-04-01

    An improved video median noise reduction algorithm is presented for 120 vehicle terminal monitoring system in this paper. The noise causes of the video images in many 120 ambulance vehicle video terminal monitor equipments are analyzed, and the space rigid body model of self-adaptive median noise reduction filter is established to decrease the noises of the video image transmission process. The noise reduction experiment of video images shows that the proposed video median noise reduction algorithm is superior to the traditional adaptive filtering method, because the new method has the superiority of space-time joint noise reduction.

  4. Low specific contact resistance on epitaxial p-type 4H-SiC with a step-bunching surface

    Science.gov (United States)

    Han, Chao; Zhang, Yu-Ming; Song, Qing-Wen; Tang, Xiao-Yan; Zhang, Yi-Men; Guo, Hui; Wang, Yue-Hu

    2015-11-01

    This paper reports the performances of Ti/Al based ohmic contacts fabricated on highly doped p-type 4H-SiC epitaxial layer which has a severe step-bunching surface. Different contact schemes are investigated based on the Al:Ti composition with no more than 50 at.% Al. The specific contact resistance (SCR) is obtained to be as low as 2.6 × 10-6 Ω·cm2 for the bilayered Ti(100 nm)/Al(100 nm) contact treated with 3 min rapid thermal annealing (RTA) at 1000 °C. The microstructure analyses examined by physical and chemical characterization techniques reveal an alloy-assisted ohmic contact formation mechanism, i.e., a high degree of alloying plays a decisive role in forming the interfacial ternary Ti3SiC2 dominating the ohmic behavior of the Ti/Al based contact. Furthermore, a globally covered Ti3SiC2 layer with (0001)-oriented texture can be formed, regardless of the surface step bunching as well as its structural evolution during the metallization annealing. Project supported by the Key Specific Projects of Ministry of Education of China (Grant No. 625010101), the National Natural Science Foundation of China (Grant No. 61234006), the Natural Science Foundation of ShaanXi Province, China (Grant No. 2013JQ8012), the Doctoral Fund of Ministry of Education of China (Grant No. 20130203120017), and the Specific Project of the Core Devices, China (Grant No. 2013ZX0100100-004).

  5. A cell surface chondroitin sulfate proteoglycan, immunologically related to CD44, is involved in type I collagen-mediated melanoma cell motility and invasion

    DEFF Research Database (Denmark)

    Faassen, A E; Schrager, J A; Klein, D J

    1992-01-01

    motility and invasion. The current studies evaluate the role of a cell surface chondroitin sulfate proteoglycan (CSPG) in the adhesion, motility, and invasive behavior of a highly metastatic mouse melanoma cell line (K1735 M4) on type I collagen matrices. By blocking mouse melanoma cell production of CSPG...... with p-nitrophenyl beta-D-xylopyranoside (beta-D-xyloside), a compound that uncouples chondroitin sulfate from CSPG core protein synthesis, we observed a corresponding decrease in melanoma cell motility on type I collagen and invasive behavior into type I collagen gels. Melanoma cell motility on type I...... collagen could also be inhibited by removing cell surface chondroitin sulfate with chondroitinase. In contrast, type I collagen-mediated melanoma cell adhesion and spreading were not affected by either beta-D-xyloside or chondroitinase treatments. These results suggest that mouse melanoma CSPG...

  6. Surface photometry and radial color gradients of nearby luminous early-type galaxies in SDSS Stripe 82

    Institute of Scientific and Technical Information of China (English)

    Fang-Zhou Jiang; Song Huang; Qiu-Sheng Gu

    2011-01-01

    We make use of the images from the Sloan Digital Sky Survey Stripe 82 (Stripe 82) to present an analysis of r band surface brightness profiles and radial color gradients (g-r, u-r) in our sample of 111 nearby early-type galaxies (ETGs). Thanks to the Stripe 82 images, each of which is co-added from about 50 single frames, we are able to pay special attention to the low-surface-brightness areas (LSB areas) of the galaxies. The LSB areas affect the Sérsic fittings and concentration indices by making both of the indices less than the typical values for ETGs. In the Sérsic fits to all the surface brightness profiles, we found some Sérsic indices that range from 1.5 to 2.5,much smaller than those of typical de Vaucouleur profiles and relatively close to those of exponential disks, and some others much larger than four but still with accurate fitting. Two galaxies cannot be fitted with a single Sérsic profile, but once we try double Sérsic profiles, the fittings are improved: one with a profile relatively close to the de Vaucouleur law in the inner area and a profile relatively close to an exponential law in the LSB area, the other with a nice fitting in the inner area but still having a failed fitting in the outer area. About 60% of the sample has negative color gradients (red-core) within 1.5Re, much more than the approximately 10% positive ones (bluecore) within the same radius. However, taking into account the LSB areas, we find that the color gradients are not necessarily monotonic: about one third of the red-core (or blue-core) galaxies have positive (or negative) color gradients in the outer areas.So LSB areas not only make ETGs' Sérsic profiles deviate from de Vaucouleur ones and shift to the disk end, but also reveal that quite a number of ETGs have opposite color gradients in inner and outer areas. These outcomes remind us of the necessity of double-Sérsic fitting. These LSB phenomena may be interpreted by mergers and thus have different metallicity

  7. Lactobacillus reuteri Surface Mucus Adhesins Upregulate Inflammatory Responses Through Interactions With Innate C-Type Lectin Receptors.

    Science.gov (United States)

    Bene, Krisztián P; Kavanaugh, Devon W; Leclaire, Charlotte; Gunning, Allan P; MacKenzie, Donald A; Wittmann, Alexandra; Young, Ian D; Kawasaki, Norihito; Rajnavolgyi, Eva; Juge, Nathalie

    2017-01-01

    The vertebrate gut symbiont Lactobacillus reuteri exhibits strain-specific adhesion and health-promoting properties. Here, we investigated the role of the mucus adhesins, CmbA and MUB, upon interaction of L. reuteri ATCC PTA 6475 and ATCC 53608 strains with human monocyte-derived dendritic cells (moDCs). We showed that mucus adhesins increased the capacity of L. reuteri strains to interact with moDCs and promoted phagocytosis. Our data also indicated that mucus adhesins mediate anti- and pro-inflammatory effects by the induction of interleukin-10 (IL-10), tumor necrosis factor alpha (TNF-α), IL-1β, IL-6, and IL-12 cytokines. L. reuteri ATCC PTA 6475 and ATCC 53608 were exclusively able to induce moDC-mediated Th1 and Th17 immune responses. We further showed that purified MUB activates moDCs and induces Th1 polarized immune responses associated with increased IFNγ production. MUB appeared to mediate these effects via binding to C-type lectin receptors (CLRs), as shown using cell reporter assays. Blocking moDCs with antibodies against DC-specific intercellular adhesion molecule 3-grabbing non-integrin (DC-SIGN) or Dectin-2 did not affect the uptake of the MUB-expressing strain, but reduced the production of TNF-α and IL-6 by moDCs significantly, in line with the Th1 polarizing capacity of moDCs. The direct interaction between MUB and CLRs was further confirmed by atomic force spectroscopy. Taken together these data suggest that mucus adhesins expressed at the cell surface of L. reuteri strains may exert immunoregulatory effects in the gut through modulating the Th1-promoting capacity of DCs upon interaction with C-type lectins.

  8. Accumulation of radioactive corrosion products on steel surfaces of VVER type nuclear reactors. I. 110mAg

    Science.gov (United States)

    Hirschberg, Gábor; Baradlai, Pál; Varga, Kálmán; Myburg, Gerrit; Schunk, János; Tilky, Péter; Stoddart, Paul

    Formation, presence and deposition of corrosion product radionuclides (such as 60Co, 51Cr, 54Mn, 59Fe and/or 110mAg) in the primary circuits of water-cooled nuclear reactors (PWRs) throw many obstacles in the way of normal operation. During the course of the work presented in this series, accumulations of such radionuclides have been studied at austenitic stainless steel type 08X18H10T (GOST 5632-61) surfaces (this austenitic stainless steel corresponds to AISI 321). Comparative experiments have been performed on magnetite-covered carbon steel (both materials are frequently used in some Soviet VVER type PWRs). For these laboratory-scale investigations a combination of the in situ radiotracer `thin gap' method and voltammetry is considered to be a powerful tool due to its high sensitivity towards the detection of the submonolayer coverages of corrosion product radionuclides. An independent technique (XPS) is also used to characterize the depth distribution and chemical state of various contaminants in the passive layer formed on austenitic stainless steel. In the first part of the series the accumulation of 110mAg has been investigated. Potential dependent sorption of Ag + ions (cementation) is found to be the predominant process on austenitic steel, while in the case of magnetite-covered carbon steel the silver species are mainly depleted in the form of Ag 2O. The XPS depth profile of Ag gives an evidence about the embedding of metallic silver into the entire passive layer of the austenitic stainless steel studied.

  9. Evolution of the Median Tectonic Line fault zone, SW Japan, during exhumation

    Science.gov (United States)

    Shigematsu, Norio; Kametaka, Masao; Inada, Noriyuki; Miyawaki, Masahiro; Miyakawa, Ayumu; Kameda, Jun; Togo, Tetsuhiro; Fujimoto, Koichiro

    2017-01-01

    Like many crustal-scale fault zones, the Median Tectonic Line (MTL) fault zone in Japan preserves fault rocks that formed across a broad range of physical conditions. We examined the architecture of the MTL at a large new outcrop in order to understand fault behaviours under different crustal levels. The MTL here strikes almost E-W, dips to the north, and juxtaposes the Sanbagawa metamorphic rocks to the south against the Izumi Group sediments to the north. The fault core consists mainly of Sanbagawa-derived fault gouges. The fault zone can be divided into several structural units, including two slip zones (upper and lower slip zones), where the lower slip zone is more conspicuous. Crosscutting relationships among structures and kinematics indicate that the fault zone records four stages of deformation. Microstructures and powder X-ray diffraction (XRD) analyses indicate that the four stages of deformation occurred under different temperature conditions. The oldest deformation (stage 1) was widely distributed, and had a top-to-the-east (dextral) sense of slip at deep levels of the seismogenic zone. Deformation with the same sense of slip, then became localised in the lower slip zone (stage 2). Subsequently, the slip direction in the lower slip zone changed to top-to-the-west (sinistral-normal) (stage 3). The final stage of deformation (stage 4) involved top-to-the-north normal faulting along the two slip zones within the shallow crust (near the surface). The widely distributed stage 1 damage zone characterises the deeper part of the seismogenic zone, while the sets of localised principal slip zones and branching faults of stage 4 characterise shallow depths. The fault zone architecture described in this paper leads us to suggest that fault zones display different behaviours at different crustal levels.

  10. Effects of smartphone overuse on hand function, pinch strength, and the median nerve.

    Science.gov (United States)

    İnal, Esra Erkol; Demİrcİ, kadİr; Çetİntürk, Azİze; Akgönül, Mehmet; Savaş, Serpİl

    2015-08-01

    In this study we investigated the flexor pollicis longus (FPL) tendon and median nerve in smartphone users by ultrasonography to assess the effects of smartphone addiction on the clinical and functional status of the hands. One hundred two students were divided into 3 groups: non-users, and high or low smartphone users. Smartphone Addiction Scale (SAS) scores and grip and pinch strengths were recorded. Pain in thumb movement and rest and hand function were evaluated on the visual analog scale (VAS) and the Duruöz Hand Index (DHI), respectively. The cross-sectional areas (CSAs) of the median nerve and the FPL tendon were calculated bilaterally using ultrasonography. Significantly higher median nerve CSAs were observed in the dominant hands of the high smartphone users than in the non-dominant hands (PSmartphone overuse enlarges the median nerve, causes pain in the thumb, and decreases pinch strength and hand functions. © 2015 Wiley Periodicals, Inc.

  11. New England observed and predicted median August stream/river temperature points

    Data.gov (United States)

    U.S. Environmental Protection Agency — The shapefile contains points with associated observed and predicted median August stream/river temperatures in New England based on a spatial statistical network...

  12. Prevalence of HIV infection and median CD4 counts among health ...

    African Journals Online (AJOL)

    Prevalence of HIV infection and median CD4 counts among health care workers in South Africa. ... Outcome measures. HIV prevalence and CD4 ... By occupation, prevalence was highest among student nurses (13.8%) and nurses (13.7%).

  13. Removing Noises Induced by Gamma Radiation in Cerenkov Luminescence Imaging Using a Temporal Median Filter

    Science.gov (United States)

    Li, Yang; Zhan, Yonghua; Kang, Fei; Wang, Jing

    2016-01-01

    Cerenkov luminescence imaging (CLI) can provide information of medical radionuclides used in nuclear imaging based on Cerenkov radiation, which makes it possible for optical means to image clinical radionuclide labeled probes. However, the exceptionally weak Cerenkov luminescence (CL) from Cerenkov radiation is susceptible to lots of impulse noises introduced by high energy gamma rays generating from the decays of radionuclides. In this work, a temporal median filter is proposed to remove this kind of impulse noises. Unlike traditional CLI collecting a single CL image with long exposure time and smoothing it using median filter, the proposed method captures a temporal sequence of CL images with shorter exposure time and employs a temporal median filter to smooth a temporal sequence of pixels. Results of in vivo experiments demonstrated that the proposed temporal median method can effectively remove random pulse noises induced by gamma radiation and achieve a robust CLI image. PMID:27648450

  14. Removing Noises Induced by Gamma Radiation in Cerenkov Luminescence Imaging Using a Temporal Median Filter

    Directory of Open Access Journals (Sweden)

    Xu Cao

    2016-01-01

    Full Text Available Cerenkov luminescence imaging (CLI can provide information of medical radionuclides used in nuclear imaging based on Cerenkov radiation, which makes it possible for optical means to image clinical radionuclide labeled probes. However, the exceptionally weak Cerenkov luminescence (CL from Cerenkov radiation is susceptible to lots of impulse noises introduced by high energy gamma rays generating from the decays of radionuclides. In this work, a temporal median filter is proposed to remove this kind of impulse noises. Unlike traditional CLI collecting a single CL image with long exposure time and smoothing it using median filter, the proposed method captures a temporal sequence of CL images with shorter exposure time and employs a temporal median filter to smooth a temporal sequence of pixels. Results of in vivo experiments demonstrated that the proposed temporal median method can effectively remove random pulse noises induced by gamma radiation and achieve a robust CLI image.

  15. STUDY OF COMMUNICATIONS BETWEEN MUSCULOCUTANEOUS NERVE AND MEDIAN NERVE IN ADULT CADAVER

    Directory of Open Access Journals (Sweden)

    Gangulappa Derangula

    2017-07-01

    Full Text Available BACKGROUND Variations of the musculocutaneous nerve and the median nerve, like the communications between the two, may prove valuable in the traumatology of the shoulder joint and upper arm region. These variations are important in the procedure of blocking the brachial plexus and in clinical neurology. MATERIALS AND METHODS The present study was conducted on 100 upper limbs belonging to 50 cadavers (Right 50 &left 50 obtained from the Department of Anatomy, Kakatiya medical college, Warangal, Telangana. Dissection of the infraclavicular part of the brachial plexus was done. The variations in the origin, course and communications with the median nerve were noted. RESULTS In 2% of the limbs the nerve was found to give one communicating branch to the median nerve after piercing the coracobrachialis. CONCLUSION Knowledge of possible variations between musculocutaneous nerve and median nerve is necessary to general surgeons, plastic surgeons, neurologists and orthopaedic surgeons.

  16. Development of Kinematic Graphs of Median Nerve during Active Finger Motion: Implications of Smartphone Use.

    Directory of Open Access Journals (Sweden)

    Hoi-Chi Woo

    Full Text Available Certain hand activities cause deformation and displacement of the median nerve at the carpal tunnel due to the gliding motion of tendons surrounding it. As smartphone usage escalates, this raises the public's concern whether hand activities while using smartphones can lead to median nerve problems.The aims of this study were to 1 develop kinematic graphs and 2 investigate the associated deformation and rotational information of median nerve in the carpal tunnel during hand activities.Dominant wrists of 30 young adults were examined with ultrasonography by placing a transducer transversely on their wrist crease. Ultrasound video clips were recorded when the subject performing 1 thumb opposition with the wrist in neutral position, 2 thumb opposition with the wrist in ulnar deviation and 3 pinch grip with the wrist in neutral position. Six still images that were separated by 0.2-second intervals were then captured from the ultrasound video for the determination of 1 cross-sectional area (CSA, 2 flattening ratio (FR, 3 rotational displacement (RD and 4 translational displacement (TD of median nerve in the carpal tunnel, and these collected information of deformation, rotational and displacement of median nerve were compared between 1 two successive time points during a single hand activity and 2 different hand motions at the same time point. Finally, kinematic graphs were constructed to demonstrate the mobility of median nerve during different hand activities.Performing different hand activities during this study led to a gradual reduction in CSA of the median nerve, with thumb opposition together with the wrist in ulnar deviation causing the greatest extent of deformation of the median nerve. Thumb opposition with the wrist in ulnar deviation also led to the largest extent of TD when compared to the other two hand activities of this study. Kinematic graphs showed that the motion pathways of median nerve during different hand activities were complex

  17. Surface-type nonvolatile electric memory elements based on organic-on-organic CuPc-H2 Pc heterojunction

    Institute of Scientific and Technical Information of China (English)

    Khasan S. Karimov; Zubair Ahmad; Farid Touati; M. Mahroof-Tahir; M. Muqeet Rehman; S. Zameer Abbas

    2015-01-01

    A novel surface-type nonvolatile electric memory elements based on organic semiconductors CuPc and H2Pc are fabricated by vacuum deposition of the CuPc and H2Pc films on preliminary deposited metallic (Ag and Cu) electrodes. The gap between Ag and Cu electrodes is 30–40 µm. For the current–voltage (I–V ) characteristics the memory effect, switching effect, and negative differential resistance regions are observed. The switching mechanism is attributed to the electric-field-induced charge transfer. As a result the device switches from a low to a high-conductivity state and then back to a low conductivity state if the opposite polarity voltage is applied. The ratio of resistance at the high resistance state to that at the low resistance state is equal to 120–150. Under the switching condition, the electric current increases∼80–100 times. A comparison between the forward and reverse I–V characteristics shows the presence of rectifying behavior.

  18. Evidence of p- to n-type inversion at CIGS grain boundaries: A depth-dependent surface electron microscopy study

    Science.gov (United States)

    Chan, Calvin; Ohta, Taisuke; Kellogg, Gary; Mansfield, Lorelle; Noufi, Rommel

    2014-03-01

    Chalcopyrite Cu(In1-xGax)Se2 (CIGS) is an interesting photovoltaic material because it holds the laboratory record for thin-film solar power conversion efficiency (η > 20 %) despite its disordered microcrystalline structure. However, commercialization of this technology has been limited by structural and chemical variations in CIGS films. Many microscopic and spectroscopic studies have shown built-in electric potentials (Φbi) at CIGS grain boundaries. This may assist with electron-hole separation, but the reported magnitude and statistical distribution of Φbi remains inconsistent between studies. In this work, photoemission and low-energy electron microscopies (PEEM and LEEM) were used to reconcile these reported differences. Highly surface sensitive PEEM measurements showed Φbi ~ 0 . 5 V, which was consistent with most other reports. However, more bulk sensitive LEEM measurements showed Φbi ~ 1 . 5 V, which strongly suggests p- to n-type inversion at CIGS grain boundaries. This formation of pn junctions at CIGS grain boundaries is likely responsible for the high performance of CIGS photovoltaics. Sandia is managed by Sandia Corp., a subsidiary of Lockheed Martin, for the U.S. DOE NNSA (DE-AC04-94AL85000). Work was supported by an U.S. DOE EERE SunShot Bridging Research Interactions through collaborative Development Grants in Energy (BRIDGE).

  19. The modeling of quadratic B-splines surfaces for the tomographic reconstruction in the FCC- type-riser

    Energy Technology Data Exchange (ETDEWEB)

    Vasconcelos, Geovane Vitor; Dantas, Carlos Costa, E-mail: geovitor@bol.com.b, E-mail: ccd@ufpe.b [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. de Energia Nuclear. Grupo de Radioquimica; Melo, Silvio de Barros; Pires, Renan Ferraz, E-mail: sbm@cin.ufpe.b, E-mail: rfp@cin.ufpe.b [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Centro de Informatica

    2009-07-01

    The 3D tomography reconstruction has been a profitable alternative in the analysis of the FCC-type- riser (Fluid Catalytic Cracking), for appropriately keeping track of the sectional catalyst concentration distribution in the process of oil refining. The method of tomography reconstruction proposed by M. Azzi and colleagues (1991) uses a relatively small amount of trajectories (from 3 to 5) and projections (from 5 to 7) of gamma rays, a desirable feature in the industrial process tomography. Compared to more popular methods, such as the FBP (Filtered Back Projection), which demands a much higher amount of gamma rays projections, the method by Azzi et al. is more appropriate for the industrial process, where the physical limitations and the cost of the process require more economical arrangements. The use of few projections and trajectories facilitates the diagnosis in the flow dynamical process. This article proposes an improvement in the basis functions introduced by Azzi et al., through the use of quadratic B-splines functions. The use of B-splines functions makes possible a smoother surface reconstruction of the density distribution, since the functions are continuous and smooth. This work describes how the modeling can be done. (author)

  20. The VLT-FLAMES Tarantula Survey XXV. Surface nitrogen abundances of O-type giants and supergiants

    CERN Document Server

    Grin, N J; de Koter, A; Sana, H; Puls, J; Brott, I; Crowther, P A; Dufton, P L; Evans, C J; Graefener, G; Herrero, A; Langer, N; Lennon, D J; van Loon, J Th; Markova, N; de Mink, S E; Najarro, F; Schneider, F R N; Taylor, W D; Tramper, F; Vink, J S; Walborn, W R

    2016-01-01

    Theoretically, rotation-induced chemical mixing in massive stars has far reaching evolutionary consequences, affecting the sequence of morphological phases, lifetimes, nucleosynthesis, and supernova characteristics. Using a sample of 72 presumably single O-type giants to supergiants observed in the context of the VLT-FLAMES Tarantula Survey (VFTS), we aim to investigate rotational mixing in evolved core-hydrogen burning stars initially more massive than $15\\,M_\\odot$ by analysing their surface nitrogen abundances. Using stellar and wind properties derived in a previous VFTS study, we constrained the nitrogen abundance by fitting the equivalent widths of relatively strong lines that are sensitive to changes in the abundance of this element. Given the quality of the data, we constrained the nitrogen abundance in 38 cases; for 34 stars only upper limits could be derived, which includes almost all stars rotating at $v_\\mathrm{e}\\sin i >200\\,\\mathrm{km s^{-1}}$. We analysed the nitrogen abundance as a function of ...

  1. Low thermal budget n-type doping into Ge(001) surface using ultraviolet laser irradiation in phosphoric acid solution

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, Kouta, E-mail: ktakahas@alice.xtal.nagoya-u.ac.jp, E-mail: kurosawa@alice.xtal.nagoya-u.ac.jp; Sakashita, Mitsuo; Takeuchi, Wakana; Nakatsuka, Osamu [Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Kurosawa, Masashi, E-mail: ktakahas@alice.xtal.nagoya-u.ac.jp, E-mail: kurosawa@alice.xtal.nagoya-u.ac.jp [Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Institute of Materials and Systems for Sustainability, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Institute for Advanced Research, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8601 (Japan); Ikenoue, Hiroshi [Graduate School of Information Science and Electrical Engineering, Kyushu University, 744 Motooka, Fukuoka 819-0395 (Japan); Zaima, Shigeaki [Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Institute of Materials and Systems for Sustainability, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan)

    2016-02-01

    We have investigated phosphorus (P) doping into Ge(001) surfaces by using ultraviolet laser irradiation in phosphoric acid solution at room temperature. We demonstrated that the diffusion depth of P in Ge and the concentration of electrically activated P can be controlled by the number of laser shots. Indeed, a high concentration of electrically activated P of 2.4 × 10{sup 19} cm{sup −3} was realized by 1000-times laser shots at a laser energy of 1.0 J/cm{sup 2}, which is comparable or better than the counterparts of conventional n-type doping using a high thermal budget over 600 °C. The generation current is dominant in the reverse bias condition for the laser-doped pn-junction diodes independent on the number of laser shots, thus indicating low-damage during the pn-junction formation. These results open up the possibility for applicable low thermal budget doping process for Ge-based devices fabricated on flexible substrates as well as Si electronics.

  2. Median nerve cross-sectional area and MRI diffusion characteristics: normative values at the carpal tunnel

    Energy Technology Data Exchange (ETDEWEB)

    Yao, Lawrence; Gai, Neville [Clinical Center, Radiology and Imaging Sciences, Bethesda, MD (United States)

    2009-04-15

    Enlargement of the median nerve is an objective potential imaging sign of carpal tunnel syndrome. Diffusion tensor MRI (DTI) may provide additional structural information that may prove useful in characterizing median neuropathy. This study further examines normal values for median nerve cross-sectional area (CSA), apparent diffusion coefficient (ADC), and fractional anisotropy (FA). Twenty-three wrists in 17 healthy volunteers underwent MRI of the wrist at 3 T. In 13 subjects, DTI was performed at a B value of 600 mm{sup 2}/s. Median nerve CSA, ADC, and FA were analyzed at standardized anatomic levels. Mean (SD) median nerve CSA within the proximal carpal tunnel was 10.0 (3.4) mm{sup 2}. The mean (SD) FA of the median nerve was 0.71 (0.06) and 0.70 (0.13) proximal to and within the carpal tunnel, respectively. There was a significant difference between nerve CSA and ADC, but not FA, at the distal forearm and proximal carpal tunnel. Nerve CSA, ADC, and FA did not differ between men and women or between dominant and non-dominant wrists. Nerve CSA at the proximal carpal tunnel was positively correlated with subject age and body mass index. Our results suggest a 90% upper confidence limit for normal median nerve CSA of 14.4 mm{sup 2} at the proximal carpal tunnel, higher than normal limits reported by many ultrasound studies. We observed a difference between the CSA and ADC, but not the FA, of the median nerve at the distal forearm and proximal carpal tunnel levels. (orig.)

  3. Determination of Median Nerve Somatosensory Evoked Potentials in 27 Patients with Hemiplegia

    Institute of Scientific and Technical Information of China (English)

    刘雅丽; 尤春景; 黄杰; 刘培玲

    2002-01-01

    Summary: Twenty-seven in-patients with hemiplegia following brain injury were studied by using up per extremity median nerve somatosensory evoked patentials (SVEP), Brunnstrom assessment in hemiplegic hand and assessment of the patients' activities of daily lioing (ADL) (Barthel index). The upper extremity median nerve SEP on the affected and normal sides was determined. By using Kovin dba standard, upper extremity median nerve SEP was graded in accordance with N20. The correla tion between the differences of SEP N20 amplitude and the latencies on the both sides and the Barthel index scores was analyzed. A Spearman correlation analysis was made between the median nerve SEP N20 grades and Brunnstrom stages in hand or ADL on the affected side. The results showed that up per extremity median nerve SEP grades were positively correlated with those of the Brunnstrom stages in hand (r1 =0. 6925, P1<0. 01). The correlation coefficient between SEP N20 grades and patients' ADL grades was r2= 0. 5015, P2<0.01. It was concluded that upper extremity median nerve SEP could be used as a sensitive electrophysiological predictor to clinically assess hemiplegic hand function. SEP N20 might play a role in predicting the ADL of the patients with hemiplegia to some extent, but could not be used as a sensitive predictor to directly observe and predict the ADL of the patients.

  4. Analyzing the influence of median cross-section design on highway safety using vehicle dynamics simulations.

    Science.gov (United States)

    Stine, Jason S; Hamblin, Bridget C; Brennan, Sean N; Donnell, Eric T

    2010-11-01

    Although vehicle dynamics simulations have long been used in vehicle design and crash reconstruction, their use for highway design is rare. This paper investigates the safety of highway medians through iterative simulations of off-road median encroachments. The commercially available software CarSim was used to simulate over one hundred thousand encroachments, representing the entire passenger vehicle fleet and a wide range of encroachment angles, departure speeds, steering inputs, and braking inputs. Each individual simulation output was then weighted using data from previous studies to reflect the probability of each specific accident scenario occurring in a real-life median encroachment. Results of this analysis illustrate the relative influence of median cross-section geometry on the resulting accident outcomes. The simulations indicate that the overall safety of a highway median depends on the occurrence of both vehicle rollover and median crossover events, and the cross-section shape, slope, and width are all shown to greatly affect each of these incidents. An evaluation of the simulation results was conducted with vehicle trajectories from previous experimental crash tests. Further assessment of the aggregate simulation results to actual crash data was achieved through comparison with several databases of crash statistics. Both efforts showed a strong agreement between the simulations and the real-life crash data.

  5. Modeling Nonlinear Adsorption with a Single Chemical Parameter: Predicting Chemical Median Langmuir Binding Constants.

    Science.gov (United States)

    Davis, Craig Warren; Di Toro, Dominic M

    2015-07-07

    Procedures for accurately predicting linear partition coefficients onto various sorbents (e.g., organic carbon, soils, clay) are reliable and well established. However, similar procedures for the prediction of sorption parameters of nonlinear isotherm models are not. The purpose of this paper is to present a procedure for predicting nonlinear isotherm parameters, specifically the median Langmuir binding constants, K̃L, obtained utilizing the single-chemical parameter log-normal Langmuir isotherm developed in the accompanying work. A reduced poly parameter linear free energy relationship (pp-LFER) is able to predict median Langmuir binding constants for graphite, charcoal, and Darco granular activated carbon (GAC) adsorption data. For the larger F400 GAC data set, a single pp-LFER model was insufficient, as a plateau is observed for the median Langmuir binding constants of larger molecular volume sorbates. This volumetric cutoff occurs in proximity to the median pore diameter for F400 GAC. A log-linear relationship exists between the aqueous solubility of these large compounds and their median Langmuir binding constants. Using this relationship for the chemicals above the volumetric cutoff and the pp-LFER below the cutoff, the median Langmuir binding constants can be predicted with a root-mean square error for graphite (n = 13), charcoal (n = 11), Darco GAC (n = 14), and F400 GAC (n = 44) of 0.129, 0.307, 0.407, and 0.424, respectively.

  6. [Safety of repeat median sternotomy in the palliative treatment of patients with univentricular heart].

    Science.gov (United States)

    Díliz-Nava, Héctor; Meléndez-Sagaón, Isis; Tamaríz-Cruz, Orlando; García-Benitez, Luis; Araujo-Martínez, Aric; Palacios-Macedo, Alexis

    2017-01-13

    Establish the morbidity and mortality of patients with univentricular hearts who underwent repeat median sternotomy at the Instituto Nacional de Pediatría METHOD: We retrospectively review the clinical charts of all patient who underwent repeat median sternotomy from 2001 to 2016. Sixty-five patients underwent 76 surgeries through repeat median sternotomy. Fifty-nine patients had a first repeat median sternotomy with a mean age of 36months (range 4-176months) and a mean weight of 12.2kg (range 3.2-21.5kg). Forty patients had a Glenn procedure and 19 patients had a Fontan procedure. There were 17 patients with second repeat median sternotomy, mean age of 89months (range 48-156months) and mean weight of 22.7kg (14.4-41kg). In all 17 patients a Fontan procedure was done. Section of the right coronary artery with electrocardiographic changes and a right atrium tear that caused hypotension, occurred during first repeat sternotomy. An aortic tear occurred during a second repeat sternotomy with massive bleeding and consequent death. This represents a 3.9% of reentry injury. We conclude that repeat median sternotomy is a safe procedure. Copyright © 2016 Instituto Nacional de Cardiología Ignacio Chávez. Publicado por Masson Doyma México S.A. All rights reserved.

  7. Effects of perineural steroid injections on median nerve conduction during the carpal tunnel release

    Directory of Open Access Journals (Sweden)

    Stepić Nenad

    2008-01-01

    Full Text Available Background/Aim. The treatment outcome of the median nerve compressive neuropathy in the carpal zone due to carpal tunnel syndrome (CTS is represented by recovering the nerves sensibility, conductivity, condition and strength. Perineural application of betamethasone during the surgical decompression might result in faster recovery of compressed median nerve's conduction speed. Methods. In this study 40 patients with CTS were randomly divided in the two groups. In the first group (n = 20 we performed the surgical decompression of the median nerve by the open release of the carpal tunnel, and in the second group (n = 20 we applicated a perineural injection of 1 ml of betamethason immediately after the surgical decompression. We performed the electrodiagnostic (ED examinations 7, 30 and 90 days after the surgery, and measured the conduction speed of the median nerve in the carpal tunnel zone and the sensitivity conduction speed of the median nerve. Results. Significant differences in examined ED respective variable values in different time intervals were obtained. At the final measurements, 90 days after the surgical procedure, both groups evidenced a full recovery of the conduction speed in the carpal tunnel with statistically significant better results in the second group of the patients (t = -2.116; p = 0.043. Conclusion. Intraoperative application of the corticosteroid injection during the surgical decompression results in faster regaining of conduction speed of the median nerve.

  8. Relationship between healthcare worker surface contacts, care type and hand hygiene: an observational study in a single-bed hospital ward.

    Science.gov (United States)

    King, M-F; Noakes, C J; Sleigh, P A; Bale, S; Waters, L

    2016-09-01

    This study quantifies the relationship between hand hygiene and the frequency with which healthcare workers (HCWs) touch surfaces in patient rooms. Surface contacts and hand hygiene were recorded in a single-bed UK hospital ward for six care types. Surface contacts often formed non-random patterns, but hygiene before or after patient contact depends significantly on care type (P=0.001). The likelihood of hygiene correlated with the number of surface contacts (95% confidence interval 1.1-5.8, P=0.002), but not with time spent in the room. This highlights that a potential subconscious need for hand hygiene may have developed in HCWs, which may support and help focus future hygiene education programmes. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  9. A study on wall surface mobile robots, 1; Developemnt of moving mechanism for crawler type of wall surface mobile robots with vacuum pads

    Energy Technology Data Exchange (ETDEWEB)

    Fukuda, Toshio; Matsuura, Hideo; Arai, Fumihito (Nagoya Univ. (Japan). Faculty of Engineering); Nishibori, Kenji; Sakauchi, Hitoshi; Yoshii, Naohito

    1992-06-01

    In this paper, we study the moving mechanism of a wall surface mobile robot for hazard maintenance under gravity. This robot can cling on a vertical wall or ceiling by vacuum pads. The vacuum pads are set on the crawler so as to enable rapid mobility on the surface. Each vacuum pad is simply designed. There is a mechanical valve set at each sucker and every sucker is connected with an air duct inside the crawler belt. The valve opens mechanically when the sucker touches the surface, and the sucker clings to the surface. By this mechanism, the sucking control system becomes simple. The vacuum pad is made of flexible material in order to assure a sufficient sucking force even when the surface is rough. This robot also has an automatic pushing mechanism for the suckers and distribution mechanism. We designed, made and tested the prototype. In the experiment, this robot succeeded in climbing smoothly and rapidly on the surface of a vertical wall and ceiling, on both rough and smooth finishes. (author).

  10. A study on wall surface mobile robots. Development of moving mechanism for crawler-type wall surface mobile robots with vacuum pads

    Energy Technology Data Exchange (ETDEWEB)

    Fukuda, Toshio; Arai, Fumihito; Matsuura, Hideo [Nagoya Univ. (Japan). School of Engineering; Nishibori, Kenji; Sakauchi, Hitoshi; Yoshii, Naohito

    1995-06-01

    We study the moving mechanism of a wall surface mobile robot for hazard maintenance under gravity. This robot can attach itself to a vertical wall or ceiling by vacuum pads. The vacuum pads are set on the crawler so as to enable rapid mobility on the surface. Each vacuum pad is simply designed. There is a mechanical valve set at each sucker, and every sucker is connected to an air duct inside the crawler belt. The valve opens mechanically when the sucker touches the surface, and the sucker clings to the surface. By this mechanism, the sucking control system becomes simple. The vacuum pad is made of flexible material in order to ensure sufficient sucking force even when the surface is rough. This robot also has an automatic pushing mechanism for the suckers and distribution mechanism. We designed, fabricated and tested the prototype. In the experiment, this robot succeeded in smoothly and rapidly climbing the surface of vertical walls and ceilings having both rough and smooth finishes. (author).

  11. The effect of surfaces type on vibration behavior of piezoelectric micro-cantilever close to sample surface in a humid environment based on MCS theory

    Science.gov (United States)

    Korayem, M. H.; Korayem, A. H.

    2016-08-01

    Atomic force microscopy (AFM) has been known as an innovative tool in the fields of surface topography, determination of different mechanical properties and manipulation of particles at the micro- and nanoscales. This paper has been concerned with advanced modeling and dynamic simulation of AFM micro-cantilever (MC) in the amplitude mode in the air environment. To increase the accuracy of the governing equations, modified couple stress theory appropriate in micro- and nanoscales has been utilized based on Timoshenko beam theory in the air environment near the sample surface. Also, to discretize the equations, differential quadrature method has been recommended. In modeling, geometric discontinuities due to the presence of a piezoelectric layer enclosed between two electrode layers and the change in MC cross section when connected to the MC have been considered. In addition to the effect of MC modeling on the accuracy of modeling and vibration amplitude during surface topography, understanding and modeling the environmental forces in the air environment, including van der Waals, capillary and contact forces, are important. This paper has been provided more accurate environmental forces modeling and has been investigated the vibration behavior of piezoelectric MC in the humid environment. Moreover, this paper has been examined the maximum and minimum MC amplitude in the air environment close to the surface with different kinds of topography. The results illustrate that kind of surfaces has effect on the maximum and minimum amplitude due to the decrease or increase in equilibrium MC distance.

  12. Macrophage inducible C-type lectin (Mincle) recognizes glycosylated surface (S)-layer of the periodontal pathogen Tannerella forsythia

    Science.gov (United States)

    Chinthamani, Sreedevi; Settem, Rajendra P.; Honma, Kiyonobu; Kay, Jason G.

    2017-01-01

    The oral pathogen Tannerella forsythia is implicated in the development of periodontitis, a common inflammatory disease that leads to the destruction of the gum and tooth supporting tissues, often leading to tooth loss. T. forsythia is a unique Gram-negative organism endowed with an elaborate protein O-glycosylation system that allows the bacterium to express a glycosylated surface (S)-layer comprising two high molecular weight glycoproteins modified with O-linked oligosaccharides. The T. forsythia S-layer has been implicated in the modulation of cytokine responses of antigen presenting cells, such as macrophages, that play a significant role during inflammation associated with periodontitis. The macrophage-inducible C-type lectin receptor (Mincle) is an FcRγ-coupled pathogen recognition receptor that recognizes a wide variety of sugar containing ligands from fungal and bacterial pathogens. In this study, we aimed to determine if Mincle might be involved in the recognition of T. forsythia S-layer and modulation of cytokine response of macrophages against the bacterium. Binding studies using recombinant Mincle-Fc fusion protein indicated a specific Ca2+-dependent binding of Mincle to T. forsythia S-layer. Subsequent experiments with Mincle-expressing and Mincle-knockdown macrophages revealed a role for Mincle/S-layer interaction in the induction of both pro- and anti-inflammatory cytokine secretion in macrophages stimulated with T. forsythia as well as its S-layer. Together, these studies revealed Mincle as an important macrophage receptor involved in the modulation of cytokine responses of macrophages against T. forsythia, and thus may play a critical role in orchestrating the host immune response against the bacterium. PMID:28264048

  13. Macrophage inducible C-type lectin (Mincle) recognizes glycosylated surface (S)-layer of the periodontal pathogen Tannerella forsythia.

    Science.gov (United States)

    Chinthamani, Sreedevi; Settem, Rajendra P; Honma, Kiyonobu; Kay, Jason G; Sharma, Ashu

    2017-01-01

    The oral pathogen Tannerella forsythia is implicated in the development of periodontitis, a common inflammatory disease that leads to the destruction of the gum and tooth supporting tissues, often leading to tooth loss. T. forsythia is a unique Gram-negative organism endowed with an elaborate protein O-glycosylation system that allows the bacterium to express a glycosylated surface (S)-layer comprising two high molecular weight glycoproteins modified with O-linked oligosaccharides. The T. forsythia S-layer has been implicated in the modulation of cytokine responses of antigen presenting cells, such as macrophages, that play a significant role during inflammation associated with periodontitis. The macrophage-inducible C-type lectin receptor (Mincle) is an FcRγ-coupled pathogen recognition receptor that recognizes a wide variety of sugar containing ligands from fungal and bacterial pathogens. In this study, we aimed to determine if Mincle might be involved in the recognition of T. forsythia S-layer and modulation of cytokine response of macrophages against the bacterium. Binding studies using recombinant Mincle-Fc fusion protein indicated a specific Ca2+-dependent binding of Mincle to T. forsythia S-layer. Subsequent experiments with Mincle-expressing and Mincle-knockdown macrophages revealed a role for Mincle/S-layer interaction in the induction of both pro- and anti-inflammatory cytokine secretion in macrophages stimulated with T. forsythia as well as its S-layer. Together, these studies revealed Mincle as an important macrophage receptor involved in the modulation of cytokine responses of macrophages against T. forsythia, and thus may play a critical role in orchestrating the host immune response against the bacterium.

  14. August Median Streamflow on Ungaged Streams in Eastern Aroostook County, Maine

    Science.gov (United States)

    Lombard, Pamela J.; Tasker, Gary D.; Nielsen, Martha G.

    2003-01-01

    Methods for estimating August median streamflow were developed for ungaged, unregulated streams in the eastern part of Aroostook County, Maine, with drainage areas from 0.38 to 43 square miles and mean basin elevations from 437 to 1,024 feet. Few long-term, continuous-record streamflow-gaging stations with small drainage areas were available from which to develop the equations; therefore, 24 partial-record gaging stations were established in this investigation. A mathematical technique for estimating a standard low-flow statistic, August median streamflow, at partial-record stations was applied by relating base-flow measurements at these stations to concurrent daily flows at nearby long-term, continuous-record streamflow- gaging stations (index stations). Generalized least-squares regression analysis (GLS) was used to relate estimates of August median streamflow at gaging stations to basin characteristics at these same stations to develop equations that can be applied to estimate August median streamflow on ungaged streams. GLS accounts for varying periods of record at the gaging stations and the cross correlation of concurrent streamflows among gaging stations. Twenty-three partial-record stations and one continuous-record station were used for the final regression equations. The basin characteristics of drainage area and mean basin elevation are used in the calculated regression equation for ungaged streams to estimate August median flow. The equation has an average standard error of prediction from -38 to 62 percent. A one-variable equation uses only drainage area to estimate August median streamflow when less accuracy is acceptable. This equation has an average standard error of prediction from -40 to 67 percent. Model error is larger than sampling error for both equations, indicating that additional basin characteristics could be important to improved estimates of low-flow statistics. Weighted estimates of August median streamflow, which can be used when

  15. June and August median streamflows estimated for ungaged streams in southern Maine

    Science.gov (United States)

    Lombard, Pamela J.

    2010-01-01

    Methods for estimating June and August median streamflows were developed for ungaged, unregulated streams in southern Maine. The methods apply to streams with drainage areas ranging in size from 0.4 to 74 square miles, with percentage of basin underlain by a sand and gravel aquifer ranging from 0 to 84 percent, and with distance from the centroid of the basin to a Gulf of Maine line paralleling the coast ranging from 14 to 94 miles. Equations were developed with data from 4 long-term continuous-record streamgage stations and 27 partial-record streamgage stations. Estimates of median streamflows at the continuous-record and partial-record stations are presented. A mathematical technique for estimating standard low-flow statistics, such as June and August median streamflows, at partial-record streamgage stations was applied by relating base-flow measurements at these stations to concurrent daily streamflows at nearby long-term (at least 10 years of record) continuous-record streamgage stations (index stations). Weighted least-squares regression analysis (WLS) was used to relate estimates of June and August median streamflows at streamgage stations to basin characteristics at these same stations to develop equations that can be used to estimate June and August median streamflows on ungaged streams. WLS accounts for different periods of record at the gaging stations. Three basin characteristics-drainage area, percentage of basin underlain by a sand and gravel aquifer, and distance from the centroid of the basin to a Gulf of Maine line paralleling the coast-are used in the final regression equation to estimate June and August median streamflows for ungaged streams. The three-variable equation to estimate June median streamflow has an average standard error of prediction from -35 to 54 percent. The three-variable equation to estimate August median streamflow has an average standard error of prediction from -45 to 83 percent. Simpler one-variable equations that use only

  16. Calculation of statistic estimates of kinetic parameters from substrate uncompetitive inhibition equation using the median method

    Directory of Open Access Journals (Sweden)

    Pedro L. Valencia

    2017-04-01

    Full Text Available We provide initial rate data from enzymatic reaction experiments and tis processing to estimate the kinetic parameters from the substrate uncompetitive inhibition equation using the median method published by Eisenthal and Cornish-Bowden (Cornish-Bowden and Eisenthal, 1974; Eisenthal and Cornish-Bowden, 1974. The method was denominated the direct linear plot and consists in the calculation of the median from a dataset of kinetic parameters Vmax and Km from the Michaelis–Menten equation. In this opportunity we present the procedure to applicate the direct linear plot to the substrate uncompetitive inhibition equation; a three-parameter equation. The median method is characterized for its robustness and its insensibility to outlier. The calculations are presented in an Excel datasheet and a computational algorithm was developed in the free software Python. The kinetic parameters of the substrate uncompetitive inhibition equation Vmax, Km and Ks were calculated using three experimental points from the dataset formed by 13 experimental points. All the 286 combinations were calculated. The dataset of kinetic parameters resulting from this combinatorial was used to calculate the median which corresponds to the statistic estimator of the real kinetic parameters. A comparative statistical analyses between the median method and the least squares was published in Valencia et al. [3].

  17. Calculation of statistic estimates of kinetic parameters from substrate uncompetitive inhibition equation using the median method.

    Science.gov (United States)

    Valencia, Pedro L; Astudillo-Castro, Carolina; Gajardo, Diego; Flores, Sebastián

    2017-04-01

    We provide initial rate data from enzymatic reaction experiments and tis processing to estimate the kinetic parameters from the substrate uncompetitive inhibition equation using the median method published by Eisenthal and Cornish-Bowden (Cornish-Bowden and Eisenthal, 1974; Eisenthal and Cornish-Bowden, 1974). The method was denominated the direct linear plot and consists in the calculation of the median from a dataset of kinetic parameters Vmax and Km from the Michaelis-Menten equation. In this opportunity we present the procedure to applicate the direct linear plot to the substrate uncompetitive inhibition equation; a three-parameter equation. The median method is characterized for its robustness and its insensibility to outlier. The calculations are presented in an Excel datasheet and a computational algorithm was developed in the free software Python. The kinetic parameters of the substrate uncompetitive inhibition equation Vmax , Km and Ks were calculated using three experimental points from the dataset formed by 13 experimental points. All the 286 combinations were calculated. The dataset of kinetic parameters resulting from this combinatorial was used to calculate the median which corresponds to the statistic estimator of the real kinetic parameters. A comparative statistical analyses between the median method and the least squares was published in Valencia et al. [3].

  18. Median Sternotomy or Right Thoracotomy Techniques for Total Artificial Heart Implantation in Calves.

    Science.gov (United States)

    Karimov, Jamshid H; Moazami, Nader; Sunagawa, Gengo; Kobayashi, Mariko; Byram, Nicole; Sale, Shiva; Such, Kimberly A; Horvath, David J; Golding, Leonard A R; Fukamachi, Kiyotaka

    2016-10-01

    The choice of optimal operative access technique for mechanical circulatory support device implantation ensures successful postoperative outcomes. In this study, we retrospectively evaluated the median sternotomy and lateral thoracotomy incisions for placement of the Cleveland Clinic continuous-flow total artificial heart (CFTAH) in a bovine model. The CFTAH was implanted in 17 calves (Jersey calves; weight range, 77.0-93.9 kg) through a median sternotomy (n = 9) or right thoracotomy (n = 8) for elective chronic implantation periods of 14, 30, or 90 days. Similar preoperative preparation, surgical techniques, and postoperative care were employed. Implantation of the CFTAH was successfully performed in all cases. Both methods provided excellent surgical field visualization. After device connection, however, the median sternotomy approach provided better visualization of the anastomoses and surgical lines for hemostasis confirmation and repair due to easier device displacement, which is severely limited following right thoracotomy. All four animals sacrificed after completion of the planned durations (up to 90 days) were operated through full median sternotomy. Our data demonstrate that both approaches provide excellent initial field visualization. Full median sternotomy provides larger viewing angles at the anastomotic suture line after device connection to inflow and outflow ports.

  19. Compression of the median nerve in the proximal forearm by a giant lipoma: A case report

    Directory of Open Access Journals (Sweden)

    O'Toole Greg A

    2008-06-01

    Full Text Available Abstract Background Compression of the median nerve by a tumour in the elbow and forearm region is rare. We present a case of neuropathy of the median nerve secondary to compression by giant lipoma in the proximal forearm. Case presentation A 46-year-old man presented with a six month history of gradually worsening numbness and paresthesia on the palmar aspect of the left thumb and thenar eminence. Clinical examination reveals a hypoaesthesia in the median nerve area of the left index and thumb compared to the contralateral side. Electromyography showed prolonged sensory latency in the distribution of the median nerve corresponding to compression in the region of the pronator teres (pronator syndrome. Radiological investigations were initially reported as normal. Conservative treatment for one month did not result in any improvement. Surgical exploration was performed and a large intermuscular lipoma enveloped the median nerve was found. A complete excision of the tumour was performed. Postoperative revaluation the X-ray of the elbow was seen to demonstrate a well-circumscribed mass in the anterior aspect of the proximal forearm. At follow-up, 14 months after surgery, the patient noted complete return of the sensation and resolution of the paresthesia. Conclusion In case of atypical findings or non frequent localization of nerve compression, clinically interpreted as an idiopathic compression, it is recommended to make a pre-operative complementary Ultrasound or MRI study.

  20. Diffusion tensor imaging and tractography of the median nerve in carpal tunnel syndrome: preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Khalil, C.; Hancart, C.; Thuc, V.Le; Cotten, A. [Service de Radiologie Osteoarticulaire, Hopital Roger Salengro, CHRU de Lille (France); Chantelot, C. [Clinique d' Orthopedie, Hopital Roger Salengro, CHRU de Lille (France); Chechin, D. [Philips Medical Systems, Suresnes (France)

    2008-10-15

    The purpose was to demonstrate the feasibility of in vivo diffusion tensor imaging (DTI) and tractography of the human median nerve with a 1.5-T MR scanner and to assess potential differences in diffusion between healthy volunteers and patients suffering from carpal tunnel syndrome. The median nerve was examined in 13 patients and 13 healthy volunteers with MR DTI and tractography using a 1.5-T MRI scanner with a dedicated wrist coil. T1-weighted images were performed for anatomical correlation. Mean fractional anisotropy (FA) and mean apparent diffusion coefficient (ADC) values were quantified in the median nerve on tractography images. In all subjects, the nerve orientation and course could be detected with tractography. Mean FA values were significantly lower in patients (p=0.03). However, no statistically significant differences were found for mean ADC values. In vivo assessment of the median nerve in the carpal tunnel using DTI with tractography on a 1.5-T MRI scanner is possible. Microstructural parameters can be easily obtained from tractography images. A significant decrease of mean FA values was found in patients suffering from chronic compression of the median nerve. Further investigations are necessary to determine if mean FA values may be correlated with the severity of nerve entrapment. (orig.)

  1. Median Fisher Discriminator: a robust feature extraction method with applications to biometrics

    Institute of Scientific and Technical Information of China (English)

    Jian YANG; Jingyu YANG; David ZHANG

    2008-01-01

    In existing Linear Discriminant Analysis (LDA) models,the class population mean is always estimated by the class sample average.In small sample size problems,such as face and palm recognition,however,the class sample average does not suffice to provide an accurate estimate of the class population mean based on a few of the given samples,particularly when there are outliers in the training set.To overcome this weakness,the class median vector is used to estimate the class population mean in LDA modeling.The class median vector has two advantages over the class sample average:(1) the class median (image) vector preserves useful details in the sample images,and (2) the class median vector is robust to outliers that exist in the training sample set.In addition,a weighting mechanism is adopted to refine the characterization of the within-class scatter so as to further improve the robustness of the proposed model.The proposed Median Fisher Discriminator (MFD) method was evaluated using the Yale and the AR face image databases and the PolyU (Polytechnic University) palmprint database.The experimental results demonstrated the robustness and effectiveness of the proposed method.

  2. The usefulness of terminal latency index of median nerve and f-wave difference between median and ulnar nerves in assessing the severity of carpal tunnel syndrome.

    Science.gov (United States)

    Park, Kang Min; Shin, Kyong Jin; Park, Jinse; Ha, Sam Yeol; Kim, Sung Eun

    2014-04-01

    The calculated electrophysiological parameters, such as terminal latency index (TLI), residual latency, modified F ratio, and F-wave inversion, have been investigated as a diagnostic tool for detection of early stage of carpal tunnel syndrome (CTS) in the literature. However, the correlation of these calculated electrophysiological parameters with the clinical severity of CTS has not been reported. The aim of this study was to determine the correlation of the calculated electrophysiological parameters and clinical severity in patients with CTS. A retrospective study was performed with 212 hands of 106 CTS patients. The CTS hands were classified as asymptomatic, mild, moderate, and severe according to the clinical severity. The distal motor latency and distal motor conduction velocity of median nerve, minimal F-wave latency of median and ulnar nerves, and sensory nerve conduction velocity in the finger-wrist and palm-wrist segment of median nerve (SNCV f-w and SNCV p-w) were obtained in a conventional nerve conduction study. The TLI, residual latency, and modified F ratio of the median nerve and the difference of minimal F-wave latencies between the median and ulnar nerves (F-diff M-U) were calculated. The distal motor latency, residual latency, and F-diff M-U were significantly increased according to the clinical severity of CTS. The motor conduction velocity, SNCV p-w, SNCV f-w, TLI, and modified F ratio were significantly decreased according to the clinical severity of CTS. In analyses of variance and Kruskal-Wallis test, we used the Scheffe test as a post-hoc comparison analysis. The TLI, F-diff M-U, and SNCV f-w showed a significant difference among all groups of each CTS severity. The sensitivity, specificity, and cut-off value of TLI, F-diff M-U, and SNCV f-w between asymptomatic and mild, mild and moderate, and moderate and severe CTS groups were calculated by using receiver operating characteristic curve analysis. The cut-off values of TLI, F-diff M-U, and

  3. The Acupuncture Effect on Median Nerve Morphology in Patients with Carpal Tunnel Syndrome: An Ultrasonographic Study.

    Science.gov (United States)

    Ural, Fatma Gülçin; Öztürk, Gökhan Tuna

    2017-01-01

    The aim of this study was to explore the acupuncture effect on the cross-sectional area (CSA) of the median nerve at the wrist in patients with carpal tunnel syndrome (CTS) and, additionally, to identify whether clinical, electrophysiological, and ultrasonographic changes show any association. Forty-five limbs of 27 female patients were randomly divided into two groups (acupuncture and control). All patients used night wrist splint. The patients in the acupuncture group received additional acupuncture therapy. Visual analog scale (VAS), Duruöz Hand Index (DHI), Quick Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire scores, electrophysiologic measurements, and median nerve CSAs were noted before and after the treatment in both groups. VAS, DHI, Quick DASH scores, and electrophysiological measurements were improved in both groups. The median nerve CSA significantly decreased in the acupuncture group, whereas there was no change in the control group. After acupuncture therapy, the patients with CTS might have both clinical and morphological improvement.

  4. Anomalous Innervation of the Median Nerve in the Arm in the Absence of the Musculocutaneous Nerve

    Directory of Open Access Journals (Sweden)

    Khursheed Raza

    2017-03-01

    Full Text Available The brachial plexus innervates the upper extremities. While variations in the formation of the brachial plexus and its terminal branches are quite common, it is uncommon for the median nerve to innervate the muscles of the arm. During the dissection of an elderly male cadaver at the Department of Anatomy, All India Institute of Medical Sciences, New Delhi, India, in 2016, the coracobrachialis muscle was found to be supplied by a direct branch from the lateral root of the median nerve and the musculocutaneous nerve was absent. The branches of the median nerve supplied the biceps brachii and brachialis muscles and the last branch continued as the lateral cutaneous nerve of the forearm. These variations may present atypically in cases of arm flexor paralysis or sensory loss on the lateral forearm. Knowledge of these variations is important in surgeries and during the administration of regional anaesthesia near the shoulder joint and upper arm.

  5. PSO Algorithm based Adaptive Median Filter for Noise Removal in Image Processing Application

    Directory of Open Access Journals (Sweden)

    Ruby Verma

    2016-07-01

    Full Text Available A adaptive Switching median filter for salt and pepper noise removal based on genetic algorithm is presented. Proposed filter consist of two stages, a noise detector stage and a noise filtering stage. Particle swarm optimization seems to be effective for single objective problem. Noise Dictation stage works on it. In contrast to the standard median filter, the proposed algorithm generates the noise map of corrupted Image. Noise map gives information about the corrupted and non-corrupted pixels of Image. In filtering, filter calculates the median of uncorrupted neighbouring pixels and replaces the corrupted pixels. Extensive simulations are performed to validate the proposed filter. Simulated results show refinement both in Peak signal to noise ratio (PSNR and Image Quality Index value (IQI. Experimental results shown that proposed method is more effective than existing methods.

  6. PENERAPAN METODE LEAST MEDIAN SQUARE-MINIMUM COVARIANCE DETERMINANT (LMS-MCD DALAM REGRESI KOMPONEN UTAMA

    Directory of Open Access Journals (Sweden)

    I PUTU EKA IRAWAN

    2014-01-01

    Full Text Available Principal Component Regression is a method to overcome multicollinearity techniques by combining principal component analysis with regression analysis. The calculation of classical principal component analysis is based on the regular covariance matrix. The covariance matrix is optimal if the data originated from a multivariate normal distribution, but is very sensitive to the presence of outliers. Alternatives are used to overcome this problem the method of Least Median Square-Minimum Covariance Determinant (LMS-MCD. The purpose of this research is to conduct a comparison between Principal Component Regression (RKU and Method of Least Median Square - Minimum Covariance Determinant (LMS-MCD in dealing with outliers. In this study, Method of Least Median Square - Minimum Covariance Determinant (LMS-MCD has a bias and mean square error (MSE is smaller than the parameter RKU. Based on the difference of parameter estimators, still have a test that has a difference of parameter estimators method LMS-MCD greater than RKU method.

  7. Median cleft of the upper lip associated with a mass: a rare case.

    Science.gov (United States)

    Jian, Xin-Chun; Zheng, Lian; Xu, Pu; Liu, De-Yu

    2014-12-01

    Median cleft lip is a midline vertical cleft through the upper lip. This is a very rare anomaly described in the literature. Median cleft lip is caused by the failure of fusion of the medial nasal prominences. In this case report, a 4-month-old boy with a median cleft associated with a mass of the upper lip is presented. The patient has no other anomalies of the nose or alveolus. The patient has normotelorism. A Z-plasty technique was used on the skin of the base of the columella. A vertical excision of the cleft with muscle approximation was performed on the white roll and the wet-dry border of either side of the defect of the upper lip. Postoperatively, the patient had a satisfactory result. The incisive scars were not visible. Cupid's bow was appropriately aligned, and the height of the upper lip was equal on both sides.

  8. The geometric median on Riemannian manifolds with application to robust atlas estimation.

    Science.gov (United States)

    Fletcher, P Thomas; Venkatasubramanian, Suresh; Joshi, Sarang

    2009-03-01

    One of the primary goals of computational anatomy is the statistical analysis of anatomical variability in large populations of images. The study of anatomical shape is inherently related to the construction of transformations of the underlying coordinate space, which map one anatomy to another. It is now well established that representing the geometry of shapes or images in Euclidian spaces undermines our ability to represent natural variability in populations. In our previous work we have extended classical statistical analysis techniques, such as averaging, principal components analysis, and regression, to Riemannian manifolds, which are more appropriate representations for describing anatomical variability. In this paper we extend the notion of robust estimation, a well established and powerful tool in traditional statistical analysis of Euclidian data, to manifold-valued representations of anatomical variability. In particular, we extend the geometric median, a classic robust estimator of centrality for data in Euclidean spaces. We formulate the geometric median of data on a Riemannian manifold as the minimizer of the sum of geodesic distances to the data points. We prove existence and uniqueness of the geometric median on manifolds with non-positive sectional curvature and give sufficient conditions for uniqueness on positively curved manifolds. Generalizing the Weiszfeld procedure for finding the geometric median of Euclidean data, we present an algorithm for computing the geometric median on an arbitrary manifold. We show that this algorithm converges to the unique solution when it exists. In this paper we exemplify the robustness of the estimation technique by applying the procedure to various manifolds commonly used in the analysis of medical images. Using this approach, we also present a robust brain atlas estimation technique based on the geometric median in the space of deformable images.

  9. Summary of theoretical and experimental investigation of grating type, silicon photovoltaic cells. [using p-n junctions on light receiving surface of base crystal

    Science.gov (United States)

    Chen, L. Y.; Loferski, J. J.

    1975-01-01

    Theoretical and experimental aspects are summarized for single crystal, silicon photovoltaic devices made by forming a grating pattern of p/n junctions on the light receiving surface of the base crystal. Based on the general semiconductor equations, a mathematical description is presented for the photovoltaic properties of such grating-like structures in a two dimensional form. The resulting second order elliptical equation is solved by computer modeling to give solutions for various, reasonable, initial values of bulk resistivity, excess carrier concentration, and surface recombination velocity. The validity of the computer model is established by comparison with p/n devices produced by alloying an aluminum grating pattern into the surface of n-type silicon wafers. Current voltage characteristics and spectral response curves are presented for cells of this type constructed on wafers of different resistivities and orientations.

  10. THE EFFECT OF DÉCOR PAPER AND RESIN TYPE ON THE PHYSICAL, MECHANICAL, AND SURFACE QUALITY PROPERTIES OF PARTICLEBOARDS COATED WITH IMPREGNATED DÉCOR PAPERS

    Directory of Open Access Journals (Sweden)

    Abdullah Istek

    2010-03-01

    Full Text Available he objective of this study is to evaluate the effect of décor paper and resin type on physical properties such as density, moisture content, water absorption and thickness swelling; mechanic properties such as bending strength, modulus of elasticity in bending, and surface quality properties of the particleboards overlaid with non-impregnated and impregnated papers. As a result, specimens laminated with MF impregnated papers showed better performance than those laminated with UF impregnated papers. Resin type and décor papers affected the physical, mechanical (with exception of tension strength and surface properties of laminated particleboards. Physical and mechanical properties of laminated particleboard were significantly improved compared to un-laminated particleboards. It was found that décor paper affected the surface properties such as impact, scratch, and abrasion, resistance to staining and cigarette burn. However, it did not change the cracking and steaming properties of laminated samples.

  11. Spherical/gyroid phase diagram of the diblock copolymer in the median selective solvent

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The effect of the median selective solution on the lamellar,spherical and gyroid structures is studied. The self-consistent field equations of the diblock copolymer solution are solved by using the reciprocal space method. It is shown that the spherical and gyroid phases have the lowest free energy in the certain range of the solution concentration. Furthermore,the phase diagram of the ordered structures in the diblock copolymer solution with the median selective solvent is calculated,which is consistent with the experimental results.

  12. Clinical and radiologic review of uncommon cause of profound iron deficiency anemia: Median arcuate ligament syndrome

    Energy Technology Data Exchange (ETDEWEB)

    Gunduz, Yasemin; Asil, Kiyasrttin; Aksoy, Yakup Ersel; Ayhan, Lacin Tatli [Dept. of Radiology, Sakarya University Medical Faculty, Sakarya (Turkmenistan)

    2014-08-15

    Median arcuate ligament syndrome is an anatomic and clinical entity characterized by dynamic compression of the proximal celiac artery by the median arcuate ligament, which leads to postprandial epigastric pain, vomiting, and weight loss. These symptoms are usually nonspecific and are easily misdiagnosed as functional dyspepsia, peptic ulcer disease, or gastropathy. In this report, we presented a 72-year-old male patient with celiac artery compression syndrome causing recurrent abdominal pain associated with gastric ulcer and iron deficiency anemia. This association is relatively uncommon and therefore not well determined. In addition, we reported the CT angiography findings and three-dimensional reconstructions of this rare case.

  13. MRI shows thickening and altered diffusion in the median and ulnar nerves in multifocal motor neuropathy

    DEFF Research Database (Denmark)

    Haakma, Wieke; Jongbloed, Bas A.; Froeling, Martijn

    2016-01-01

    Objectives To study disease mechanisms in multifocal motor neuropathy (MMN) with magnetic resonance imaging (MRI) and diffusion tensor imaging (DTI) of the median and ulnar nerves. Methods We enrolled ten MMN patients, ten patients with amyotrophic lateral sclerosis (ALS) and ten healthy controls...... (HCs). Patients underwent MRI (in a prone position) and nerve conduction studies. DTI and fat-suppressed T2-weighted scans of the forearms were performed on a 3.0T MRI scanner. Fibre tractography of the median and ulnar nerves was performed to extract diffusion parameters: fractional anisotropy (FA...... nerves. CSA was significantly larger in MMN patients compared to ALS patients and HCs (p nerves...

  14. Analysis of association between posterior crossbite, median line deviation and facial asymmetry

    OpenAIRE

    Santos, R. R.; Garbin,Artênio José Isper; Saliba, O. [UNESP; Garbin, C. A. S. [UNESP

    2014-01-01

    Facial asymmetry is a common human characteristic and can occur on many levels, originate of genetic factors, and can be caused by traumas or due to cross bite and/or muscular disability. The aim of this study was to evaluate the relation between posterior crossbite, median line deviation and facial asymmetry. For this study 70 children aged between 3 and 10 years-old were examined and photographed. Using Microsoft Office Power Point 2007, horizontal lines and one vertical line on median line...

  15. A case of fibrolipomatous hamartoma of the median nerve with macrodactyly

    Directory of Open Access Journals (Sweden)

    Sathish Arakeri

    2012-07-01

    Full Text Available Fibrolipomatous hamartoma of nerve is a tumor-like lipomatous process principally involving affecting young persons. The median nerve is most commonly affectedinvolved. The lesion is characterized by a soft slowly growing mass, surrounding and infiltrating major nerves and their branches. It may cause symptoms of compression neuropathy and is associated with macrodactyly in one third of cases. Here, we present a case of Fibrolipomatous hamartoma of nerve in the wrist of a young man arising from median nerve. Debulking of the tumour was performed.

  16. ECG baseline wander correction based on mean-median filter and empirical mode decomposition.

    Science.gov (United States)

    Xin, Yi; Chen, Yu; Hao, Wei Tuo

    2014-01-01

    A novel approach of ECG baseline wander correction based on mean-median filter and empirical mode decomposition is presented in this paper. The low frequency parts of the original signals were removed by the mean median filter in a nonlinear way to obtain the baseline wander estimation, then its series of IMFs were sifted by t-test after empirical mode decomposition. The proposed method, tested by the ECG signals in MIT-BIH Arrhythmia database and European ST_T database, is more effective compared with other baseline wander removal methods.

  17. Improving the Stability of the LMF Adaptive Algorithm Using the Median Filteer

    DEFF Research Database (Denmark)

    Bysted, Tommy Kristensen; Rusu, Corneliu

    1998-01-01

    The stability of the LMF (Least Mean Fourth) adaptive algorithm is improved by using the median of the gradient instead of the raw gradient for updating the coefficients of the adaptive filter. This operation has two advantages: first it improves the performance of the LMF in impulse noise...... environments and secondly it enables the use of larger step-size of the adaptive algorithm especially when the signals are corrupted by noise. The disadvantages are a small raise in the computational complexity and slower convergence than the LMF. Two examples are given which illustrates the behavior...... of the Median LMF compared to the LMF algorithm....

  18. SOSIAALISEN MEDIAN MARKKINOINTIVIESTINTÄ JA KÄYTTÖ LIIGA-OTTELUIDEN MARKKINOINNISSA

    OpenAIRE

    Lahdenperä, Johanna

    2016-01-01

    Opinnäytetyön aiheena oli tutkia miten sosiaalista mediaa hyödynnetään ottelutapahtumien markkinoinnissa. Lähtökohtana tutkimukselle oli kaksi Jääkiekon SM-liigan jääkiekkoseuraa ja niiden sosiaalisen median käyttö. Tavoitteena oli selvittää sosiaalisen median merkitys otteluiden markkinoinnissa. Opinnäyteyössä tutkitaan myös, miten ja millainen markkinointiviestintä sosiaalisessa mediassa vaikuttaa kannattajiin. Teoreettisessa osuudessa käsitellään sosiaalisessa mediassa tapahtuvaa markkinoi...

  19. Median and quantile tests under complex survey design using SAS and R.

    Science.gov (United States)

    Pan, Yi; Caudill, Samuel P; Li, Ruosha; Caldwell, Kathleen L

    2014-11-01

    Techniques for conducting hypothesis testing on the median and other quantiles of two or more subgroups under complex survey design are limited. In this paper, we introduce programs in both SAS and R to perform such a test. A detailed illustration of the computations, macro variable definitions, input and output for the SAS and R programs are also included in the text. Urinary iodine data from National Health and Nutrition Examination Survey (NHANES) are used as examples for comparing medians between females and males as well as comparing the 75th percentiles among three salt consumption groups.

  20. Both hyaluronan and collagen type II keep proteoglycan 4 (lubricin) at the cartilage surface in a condition that provides low friction during boundary lubrication.

    Science.gov (United States)

    Majd, Sara Ehsani; Kuijer, Roel; Köwitsch, Alexander; Groth, Thomas; Schmidt, Tannin A; Sharma, Prashant K

    2014-12-09

    Wear resistant and ultralow friction in synovial joints is the outcome of a sophisticated synergy between the major macromolecules of the synovial fluid, e.g., hyaluronan (HA) and proteoglycan 4 (PRG4), with collagen type II fibrils and other non-collagenous macromolecules of the cartilage superficial zone (SZ). This study aimed at better understanding the mechanism of PRG4 localization at the cartilage surface. We show direct interactions between surface bound HA and freely floating PRG4 using the quartz crystal microbalance with dissipation (QCM-D). Freely floating PRG4 was also shown to bind with surface bound collagen type II fibrils. Albumin, the most abundant protein of the synovial fluid, effectively blocked the adsorption of PRG4 with HA, through interaction with C and N terminals on PRG4, but not that of PRG4 with collagen type II fibrils. The above results indicate that collagen type II fibrils strongly contribute in keeping PRG4 in the SZ during cartilage articulation in situ. Furthermore, PRG4 molecules adsorbed very well on mimicked SZ of absorbed HA molecules with entangled collagen type II fibrils and albumin was not able to block this interaction. In this last condition PRG4 adsorption resulted in a coefficient of friction (COF) of the same order of magnitude as the COF of natural cartilage, measured with an atomic force microscope in lateral mode.

  1. Control of anticoagulation with vitamin K antagonists: overestimation of median time in therapeutic range when assessed by linear interpolation.

    Science.gov (United States)

    van den Besselaar, A M H P; Biedermann, Joseph S; van der Meer, Felix J M; Adriaansen, Henk J; Leebeek, Frank W G; Kruip, Marieke J H A

    2016-09-27

    Patients receiving vitamin K-antagonists are monitored by regular assessment of the International Normalized Ratio (INR). There are two popular methods for therapeutic control of anticoagulation in patient groups: 1) Time in Therapeutic Range (TTR) assessed by linear interpolation of successive INR measurements; 2) the cross-sectional proportion (CSP) of all patients' last INRs within range. The purpose of the present study is to compare the two methods using data from 53 Dutch Thrombosis Centres and to develop a semi-quantitative model for TTR based on different types of INR change. Different groups of around 400,000 patients in four consecutive years were evaluated: patients in the induction phase, short-term, long-term, low-target range, high-target range, receiving either acenocoumarol or phenprocoumon, and performing self-management. Each Centre provided TTR and CSP results for each patient group. TTR and CSP were compared using the Wilcoxon signed-rank test. Separately, we analysed the relationship between consecutive INR results regarding in or out of range and their frequency of occurrence in patients of two different cohorts. Good correlation was observed between TTR and CSP (correlation coefficient 0.694-0.950 in low-target range). In long-term acenocoumarol patients (low-target range) the median TTR was significantly higher than CSP (80.0 % and 78.7 %, respectively; prange) there was no significant difference between median TTR (83.0 %) and median CSP (82.6 %). In conclusion, the correlation between TTR assessed by linear interpolation and CSP was good. TTR assessed by linear interpolation was higher than CSP in patients on acenocoumarol.

  2. Impact or push-off lameness presentation is not altered by the type of track surface where horses are trotted

    Directory of Open Access Journals (Sweden)

    M.S. Azevedo

    2015-12-01

    Full Text Available This study aimed to evaluate the influence of the track surface on which horses are examined, regarding the phase of lameness presentation. Ten horses with lameness in at least one limb were evaluated with wireless inertial sensors on three track surfaces (concrete, loose sand and grass. Six crossover track sequences were established. The variables vector sum, maximum and minimum height of the head and pelvis, variation coefficient of the maximum and minimum height of the head and pelvis were analyzed using ANOVA, followed by Tukey test to compare means between track surface and sequence, at 5% significance level. The lameness phase (impact or pushoff was analyzed considering the proportion of affected animals. There were no differences on vector sum, maximum and minimum height or variation coefficient of head and pelvis. Difference was observed on the number of strides registered on sand compared to grass and concrete (p <0.0001 for fore and hindlimbs. Impact lameness on forelimbs was presented by a larger number of animals on the concrete surface; pushoff lameness was more evident on the grass surface. In the hindlimbs, impact lameness was more evident on the grass surface, while pushoff lameness was in greater number of animals on concrete surfaces. The track sequence on which horses were trotted during evaluation does not seem to be a factor, but the number of lame horses and the phase of lameness manifestation can vary between track surfaces, as some horses showed impact lameness on soft ground and elevation lameness on hard ground.

  3. Activity of type i methanotrophs dominates under high methane concentration: Methanotrophic activity in slurry surface crusts as influenced by methane, oxygen, and inorganic nitrogen

    DEFF Research Database (Denmark)

    Duan, Yun Feng; Reinsch, Sabine; Ambus, Per

    2017-01-01

    Livestock slurry is a major source of atmospheric methane (CH4), but surface crusts harboring methane-oxidizing bacteria (MOB) could mediate against CH4 emissions. This study examined conditions for CH4 oxidation by in situ measurements of oxygen (O2) and nitrous oxide (N2O), as a proxy for inorg......Livestock slurry is a major source of atmospheric methane (CH4), but surface crusts harboring methane-oxidizing bacteria (MOB) could mediate against CH4 emissions. This study examined conditions for CH4 oxidation by in situ measurements of oxygen (O2) and nitrous oxide (N2O), as a proxy...... in phospholipid fatty acids suggested that both Type I and Type II MOB were active, with Type I dominating high-concentration CH4 oxidation. Given the structural heterogeneity of crusts, CH4 oxidation activity likely varies spatially as constrained by the combined effects of CH4, O2, and inorganic N availability...

  4. Very low surface recombination velocity on p-type c-Si by high-rate plasma-deposited aluminum oxide

    Science.gov (United States)

    Saint-Cast, Pierre; Kania, Daniel; Hofmann, Marc; Benick, Jan; Rentsch, Jochen; Preu, Ralf

    2009-10-01

    Aluminum oxide layers can provide excellent passivation for lowly and highly doped p-type silicon surfaces. Fixed negative charges induce an accumulation layer at the p-type silicon interface, resulting in very effective field-effect passivation. This paper presents highly negatively charged (Qox=-2.1×1012 cm-2) aluminum oxide layers produced using an inline plasma-enhanced chemical vapor deposition system, leading to very low effective recombination velocities (˜10 cm s-1) on low-resistivity p-type substrates. A minimum static deposition rate (100 nm min-1) at least one order of magnitude higher than atomic layer deposition was achieved on a large carrier surfaces (˜1 m2) without significantly reducing the resultant passivation quality.

  5. Analysis of Thin Walled Wavy Shell of Monge Type Surface with Parabola and Sinusoid Curves by Variational-Difference Method

    Directory of Open Access Journals (Sweden)

    Ivanov Vyacheslav

    2017-01-01

    Full Text Available The paper is about the stress-strain state of the thin shell in the form of Monge surface with parabola generatrix and sinusoid guide. Coordinate system of the Monge surface is a system of coordinate lines of the principal curvatures of the surface. The variational-difference method is used for analysis. Variational-difference method allows using the geometric characteristics of the middle surface of the shell, which is important in the calculation of shells of complex shape. In the finite element method, which is often used in the shells of complex shape analysis, the equation of the middle surface of the shell is used only for finite element mesh.

  6. Hyperactivity in 103P/Hartley 2: Chunks from the sub-surface in Type IIa jet regions

    Science.gov (United States)

    Belton, Michael J. S.

    2017-03-01

    We analyze the observed radial distribution of column densities of water-ice particulates embedded in the primary jet region (J1) of 103P's inner coma at altitudes between 439 and 1967 m (Protopapa et al., 2014, Icarus 238, 191-204) and determine the speed and acceleration of particles and their mass-flow within the filaments of the jet. This is done by applying a CO2 driven (Type IIa) jet model proposed by Belton (2010, Icarus 210, 881-897). The model utilizes water-ice particles dislodged in the source regions of the jet filaments and accelerated by CO2 to explain the radial distribution of water-ice particulates. We provide an explanation for the remarkably different radial distribution of refractory dust particles by hypothesizing that the majority of the dust originates directly from the nucleus surface in inter-filament regions of the jet complex and is accelerated by H2O. Our model provides a mass-flow of water from the J1 jet complex that is ∼40 times greater than the constant speed sublimation model discussed by Protopapa et al. but is still too small to explain the hyperactivity of the comet. Speeds in the flow are increased by a factor up to ∼20 over those found by Protopapa et al. To account for the hyperactivity, most of the mass dislodged in the filament source regions must be in weakly accelerated large chunks that achieve only low speeds en route to the region of observation. These chunks soon leave the filamentary jet structure due to the rotation of the nucleus and do not contribute to the column densities observed at higher altitudes in the jet filaments. Employing the results of Kelley et al. (2015. Icarus 262, 187-189)) on total cross-section and mass-flow in the coma we find that large chunks with the same bulk properties as the nucleus can increase the active fraction of the comet by two or three times. With the exception that the chunks do not need to be "nearly pure water ice", these results support the hypothesis that hyperactivity in

  7. Model Study of the Influence of Ambient Temperature and Installation Types on Surface Temperature Measurement by Using a Fiber Bragg Grating Sensor.

    Science.gov (United States)

    Liu, Yi; Zhang, Jun

    2016-07-01

    Surface temperature is an important parameter in clinical diagnosis, equipment state control, and environmental monitoring fields. The Fiber Bragg Grating (FBG) temperature sensor possesses numerous significant advantages over conventional electrical sensors, thus it is an ideal choice to achieve high-accuracy surface temperature measurements. However, the effects of the ambient temperature and installation types on the measurement of surface temperature are often overlooked. A theoretical analysis is implemented and a thermal transfer model of a surface FBG sensor is established. The theoretical and simulated analysis shows that both substrate strain and the temperature difference between the fiber core and hot surface are the most important factors which affect measurement accuracy. A surface-type temperature standard setup is proposed to study the measurement error of the FBG temperature sensor. Experimental results show that there are two effects influencing measurement results. One is the "gradient effect". This results in a positive linear error with increasing surface temperature. Another is the "substrate effect". This results in a negative non-linear error with increasing surface temperature. The measurement error of the FBG sensor with single-ended fixation are determined by the gradient effect and is a linear error. It is not influenced by substrate expansion. Thus, it can be compensated easily. The measurement errors of the FBG sensor with double-ended fixation are determined by the two effects and the substrate effect is dominant. The measurement error change trend of the FBG sensor with fully-adhered fixation is similar to that with double-ended fixation. The adhesive layer can reduce the two effects and measurement error. The fully-adhered fixation has lower error, however, it is easily affected by substrate strain. Due to its linear error and strain-resistant characteristics, the single-ended fixation will play an important role in the FBG sensor

  8. 16 CFR Figure 2 to Part 1203 - ISO Headform-Basic, Reference, and Median Planes

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false ISO Headform-Basic, Reference, and Median Planes 2 Figure 2 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 2 Figure 2 to Part...

  9. Epithelioid Sarcoma of the Forearm Arising from Perineural Sheath of Median Nerve Mimicking Carpal Tunnel Syndrome

    Directory of Open Access Journals (Sweden)

    Hiromasa Fujii

    2009-01-01

    Full Text Available We report here a case of epithelioid sarcoma in the forearm of a 33-year-old male presenting with symptoms and signs of carpal tunnel syndrome originating from the direct involvement of the median nerve. Due to the slow growing of the tumor, the patient noticed the presence of tumor mass in his forearm after several months from the initial onset of the symptoms. Magnetic resonance imaging showed an 8×4 cm mass involving the median nerve in the middle part of the forearm, and histological analysis of the biopsy specimen revealed the diagnosis of epithelioid sarcoma. Radical surgical resection was performed in conjunction with adjuvant chemotherapy. The function of the flexors were restored by the multiple tendon transfers (EIP→FDS; ECRL→FDP; BrR→FPL; EDM→opponens with superficial cutaneous branch of radial nerve transfer to the resected median nerve. The function of the affected hand showed excellent with the DASH disability/symptom score of 22.5, and both the grasp power and sensory of the median nerve area has recovered up to 50% of the normal side. The patient returned to his original vocation and alive with continuous disease free at 3.5-year follow-up since initial treatment.

  10. Median Nerve Deformation and Displacement in the Carpal Tunnel during Index Finger and Thumb Motion

    NARCIS (Netherlands)

    van Doesburg, Margriet H. M.; Yoshii, Yuichi; Villarraga, Hector R.; Henderson, Jacqueline; Cha, Stephen S.; An, Kai-Nan; Amadio, Peter C.

    2010-01-01

    The purpose of this study was to investigate the deformation and displacement of the normal median nerve in the carpal tunnel during index finger and thumb motion, using ultrasound Thirty wrists from 15 asymptomatic volunteers were evaluated Cross-sectional images during motion from full extension t

  11. The "p"-Median Model as a Tool for Clustering Psychological Data

    Science.gov (United States)

    Kohn, Hans-Friedrich; Steinley, Douglas; Brusco, Michael J.

    2010-01-01

    The "p"-median clustering model represents a combinatorial approach to partition data sets into disjoint, nonhierarchical groups. Object classes are constructed around "exemplars", that is, manifest objects in the data set, with the remaining instances assigned to their closest cluster centers. Effective, state-of-the-art implementations of…

  12. The primary Maxillary Central Incisor in the Solitary Median Maxillary Central Incisor syndrome

    DEFF Research Database (Denmark)

    Kjaer, I; Balslev-Olesen, M

    2012-01-01

    Solitary Median Maxillary Central Incisor (SMMCI) is a developmental anomaly in the permanent dentition with one single central incisor in the maxilla, positioned exactly in the midline. This condition has been associated with extra- and intraoral malformations in the frontonasal segment of the c...

  13. Relation between B-mode Gray-scale Median and Clinical Features of Carotid Stenosis Vulnerability

    NARCIS (Netherlands)

    Kolkert, Joé L.; Meerwaldt, Robbert; Loonstra, Jan; Schenk, Miranda; Palen, van der Job; Dungen, van den Jan J.; Zeebregts, Clark J.

    2014-01-01

    Background Vulnerability of the carotid plaque might be useful as a predictor for ischemic stroke risk. The gray-scale median (GSM) of the carotid plaque at B-mode imaging has been described as an objective tool to quantify vulnerability. However, its use is disputed in the published literature. Thi

  14. Relation between B-mode Gray-scale Median and Clinical Features of Carotid Stenosis Vulnerability

    NARCIS (Netherlands)

    Kolkert, Joe L.; Meerwaldt, Robbert; Loonstra, Jan; Schenk, Miranda; van der Palen, Job; van den Dungen, Jan J.; Zeebregts, Clark J.

    2014-01-01

    Background: Vulnerability of the carotid plaque might be useful as a predictor for ischemic stroke risk. The gray-scale median (GSM) of the carotid plaque at B-mode imaging has been described as an objective tool to quantify vulnerability. However, its use is disputed in the published literature. Th

  15. PROJECTIONS OF DORSAL AND MEDIAN RAPHE NUCLEI TO DORSAL AND VENTRAL STRIATUM

    Directory of Open Access Journals (Sweden)

    G. R. Hassanzadeh G. Behzadi

    2007-08-01

    Full Text Available The ascending serotonergic projections are derived mainly from mesencephalic raphe nuclei. Topographical projections from mesencephalic raphe nuclei to the striatum were examined in the rat by the retrograde transport technique of HRP (horseradish peroxidase. In 29 rats stereotaxically injection of HRP enzyme were performed in dorsal and ventral parts of striatum separately. The extent of the injection sites and distribution of retrogradely labeled neuronal cell bodies were drawed on representative sections using a projection microscope. Following ipsilateral injection of HRP into the dorsal striatum, numerous labeled neurons were seen in rostral portion of dorsal raphe (DR nucleus. In the same level the cluster of labeled neurons were hevier through caudal parts of DR. A few neurons were also located in lateral wing of DR. More caudally some labeled neurons were found in lateral, medial line of DR. In median raphe nucleus (MnR the labeled neurons were scattered only in median portion of this nucleus. The ipsilateral injection of HRP into the ventral region of striatum resulted on labeling of numerous neurons in rostral, caudal and lateral portions of DR. Through the caudal extension of DR on 4th ventricle level, a large number of labeled neurons were distributed along the ventrocaudal parts of DR. In MnR, labeled neurons were observed only in median part of this nucleus. These findings suggest the mesencephalic raphe nuclei projections to caudo-putamen are topographically organized. In addition dorsal and median raphe nuclei have a stronger projection to the ventral striatum.

  16. Effects of Thai Dancing on Median Neurodynamic Response During 4-Hour Computer Use.

    Science.gov (United States)

    Mekhora, Keerin; Septham, Chatdao; Jalayondeja, Wattana

    2015-06-01

    To investigate the effects of Thai dancing on median neurodynamic response during 4-hour computer use. Twenty-four healthy participants aged 20-30 years performed 5 minutes of Thai dancing including Prom See Na, Yoong Fon Hang, Sod Soy Mala, Lor Keaw and Cha Nee Rai Mai during a 10-minute break of 4-hour computer use. All participants were assessed for nerve tension by elbow range of motion ofupper limb neurodynamic test 1 (ULNT1) and components of quick test. The discomfort was measured by visual analogue discomfort scale (VADS). These measurements were assessed before and after computer work. The statistical analyses employed paired t-test for continuous outcome and Friedman's test. The median nerve tension (indicated by elbow range of motion) was significantly reduced at before and after work, when 5 minutes of Thai dancing was introduced during the break. While components of the quick test emphasized that Thai dance immediately helped reduce the median nerve tension. The VADS in eight body areas increased over the period of 4 hours, but decreased after performing Thai dancing (pdancing helped relieve median nerve tension and body discomfort. It may be recommended as an exercise during break for computer users who continuously work to prevent WMSDs.

  17. BREAST IMPLANT RUPTURE AS A COMPLICATION OF HEART SURGERY IN MEDIAN STERNOTOMY

    OpenAIRE

    G. Nisi; CAMPANA, M.; GRIMALDI, L; C. Brandi; R. Cuomo; C. D'Aniello

    2014-01-01

    The authors report a case of a woman who underwent heart surgery in median sternotomy after breast reconstruction using prosthesis in 1984. After this open heart surgery in 2008, she developed an injury at right breast implant with intra and extra capsular silicone gel spread out the prosthesis.

  18. Combined radial and median nerve injury in diaphyseal fracture of humerus: a case report

    Institute of Scientific and Technical Information of China (English)

    Rajesh Rohilla; Rohit Singla; Narender Kumar Magu; Roop Singh; Ashish Devgun; Reetadyuti Mukhopadhyay; Paritosh Gogna

    2013-01-01

    Radial nerve palsy is the most common neurological involvement in humeral shaft fractures.But combined radial and median nerve injury in a closed diaphyseal fracture of the humerus is rare.Combined injury to both radial and median nerve can cause significant disability.A detailed clinical examination is therefore necessary following humeral shaft fractures.We report a patient with closed diaphyseal humeral fracture (AO 12A-2.3) together with radial and median nerve palsy,its management and review of the literature.As the patient had two nerves involved,surgical exploration was planned.Fracture was reduced and fixed with a 4.5 mm narrow dynamic compression pla te.There was no external injury to both radial and median nerves on surgical exploration.Neurological recovery started at 3 weeks' follow-up.Complete recovery was seen at 12 weeks.Careful clinical examination is of the utmost importance in early diagnosis of combined nerve injuries,which allows better management and rehabilitation of the patient.

  19. The problem of margin calculation and its reduction via the p-median problem model

    NARCIS (Netherlands)

    Goldengorin, B.; Krushynskyi, D.; Kuzmenko, V.; Mastorakis, NE; Demiralp, M; Mladenov,; Bojkovic, Z

    2009-01-01

    The paper deals with a model for calculation of the regulatory margin on brokerage accounts. The model is based on the p-Median problem (PMP) that is known to be NP-hard. We use a pseudo-Boolean representation of the PMP and propose several problem size reduction and preprocessing techniques. Our co

  20. Distribution of free carriers near heavily-doped epitaxial surfaces of n-type Ge(100) upon HF and HCl treatments

    Energy Technology Data Exchange (ETDEWEB)

    Park, S. J.; Bolotov, L.; Uchida, N.; Tada, T. [Nanoelectronics Research Institute, National Institute of Advanced Industrial Science and Technology, 1-1-1 Higashi, Tsukuba, Ibaraki 305-8562 (Japan)

    2015-10-15

    Carrier distributions near n-type epitaxially-grown Ge(100) surfaces with high impurity concentrations (1 × 10{sup 20} cm{sup −3}) were studied using high resolution electron energy loss spectroscopy (HREELS) upon surface treatments in aqueous solutions of HF and HCl. After surface treatments with HCl and HF, the molecular vibration modes distinctly showed either chloride or hydride terminations of Ge surfaces with negligible oxidation. The free-carrier concentration profile was inferred from the conduction band plasmon measurements as a function of the incident electron energies employing a dielectric theory simulation with a 4-layer structure and an effective electron mass of 0.02m{sub 0}. A carrier-free layer of 40 and 24 Å were derived for HCl- and HF-treated Ge(100), respectively. The surface band bending was estimated to be 0.32 eV for HF-treated Ge. HCl-treated Ge surfaces showed a band bending of 0.91 eV attributed to the strong effect of the surface Cl-Ge dipole.

  1. Two different approaches to the affective profiles model: median splits (variable-oriented) and cluster analysis (person-oriented).

    Science.gov (United States)

    Garcia, Danilo; MacDonald, Shane; Archer, Trevor

    2015-01-01

    Background. The notion of the affective system as being composed of two dimensions led Archer and colleagues to the development of the affective profiles model. The model consists of four different profiles based on combinations of individuals' experience of high/low positive and negative affect: self-fulfilling, low affective, high affective, and self-destructive. During the past 10 years, an increasing number of studies have used this person-centered model as the backdrop for the investigation of between and within individual differences in ill-being and well-being. The most common approach to this profiling is by dividing individuals' scores of self-reported affect using the median of the population as reference for high/low splits. However, scores just-above and just-below the median might become high and low by arbitrariness, not by reality. Thus, it is plausible to criticize the validity of this variable-oriented approach. Our aim was to compare the median splits approach with a person-oriented approach, namely, cluster analysis. Method. The participants (N = 2, 225) were recruited through Amazons' Mechanical Turk and asked to self-report affect using the Positive Affect Negative Affect Schedule. We compared the profiles' homogeneity and Silhouette coefficients to discern differences in homogeneity and heterogeneity between approaches. We also conducted exact cell-wise analyses matching the profiles from both approaches and matching profiles and gender to investigate profiling agreement with respect to affectivity levels and affectivity and gender. All analyses were conducted using the ROPstat software. Results. The cluster approach (weighted average of cluster homogeneity coefficients = 0.62, Silhouette coefficients = 0.68) generated profiles with greater homogeneity and more distinctive from each other compared to the median splits approach (weighted average of cluster homogeneity coefficients = 0.75, Silhouette coefficients = 0.59). Most of the

  2. Denoising of 4D cardiac micro-CT data using median-centric bilateral filtration

    Science.gov (United States)

    Clark, D.; Johnson, G. A.; Badea, C. T.

    2012-02-01

    Bilateral filtration has proven an effective tool for denoising CT data. The classic filter uses Gaussian domain and range weighting functions in 2D. More recently, other distributions have yielded more accurate results in specific applications, and the bilateral filtration framework has been extended to higher dimensions. In this study, brute-force optimization is employed to evaluate the use of several alternative distributions for both domain and range weighting: Andrew's Sine Wave, El Fallah Ford, Gaussian, Flat, Lorentzian, Huber's Minimax, Tukey's Bi-weight, and Cosine. Two variations on the classic bilateral filter, which use median filtration to reduce bias in range weights, are also investigated: median-centric and hybrid bilateral filtration. Using the 4D MOBY mouse phantom reconstructed with noise (stdev. ~ 65 HU), hybrid bilateral filtration, a combination of the classic and median-centric filters, with Flat domain and range weighting is shown to provide optimal denoising results (PSNRs: 31.69, classic; 31.58 median-centric; 32.25, hybrid). To validate these phantom studies, the optimal filters are also applied to in vivo, 4D cardiac micro-CT data acquired in the mouse. In a constant region of the left ventricle, hybrid bilateral filtration with Flat domain and range weighting is shown to provide optimal smoothing (stdev: original, 72.2 HU; classic, 20.3 HU; median-centric, 24.1 HU; hybrid, 15.9 HU). While the optimal results were obtained using 4D filtration, the 3D hybrid filter is ultimately recommended for denoising 4D cardiac micro-CT data, because it is more computationally tractable and less prone to artifacts (MOBY PSNR: 32.05; left ventricle stdev: 20.5 HU).

  3. Expression of the Surface Glycoproteins of Human Parainfluenza Virus Type 3 by Bovine Parainfluenza Virus Type 3, a Novel Attenuated Virus Vaccine Vector

    OpenAIRE

    Haller, Aurelia A.; Miller, Tessa; Mitiku, Misrach; Coelingh, Kathleen

    2000-01-01

    Bovine parainfluenza virus type 3 (bPIV3) is being evaluated as an intranasal vaccine for protection against human PIV3 (hPIV3). In young infants, the bPIV3 vaccine appears to be infectious, attenuated, immunogenic, and genetically stable, which are desirable characteristics for an RNA virus vector. To test the potential of the bPIV3 vaccine strain as a vector, an infectious DNA clone of bPIV3 was assembled and recombinant bPIV3 (r-bPIV3) was rescued. r-bPIV3 displayed a temperature-sensitive...

  4. Evaluating the assumptions of surface reflectance and aerosol type selection within the MODIS aerosol retrieval over land: the problem of dust type selection

    Directory of Open Access Journals (Sweden)

    T. Mielonen

    2010-08-01

    Full Text Available Aerosol Optical Depth (AOD and Ångström exponent (AE values derived with the MODIS retrieval algorithm over land (Collection 5 were compared with ground based sun photometer measurements in Europe, Asia, Africa, North America and South America. In Finland (Jokioinen and Sodankylä measurements were done with Precision Filter Radiometer (PFR, while in Estonia (Toravere, Italy (Ispra, Rome Tor Vergata, India (Kanpur, China (Xianghe, GSFC (USA, Mexico (Mexico City, Zambia (Mongu and Brazil (Alta Floresta Cimel (AERONET, level 2 measurements were used. Comparison results for AOD were generally good, although there seems to be room for improvement in the MODIS aerosol model selection, particularly how dust is taken into account. At all studied sites, the MODIS algorithm often selects the dust aerosol model even when dust does not seem to be present and the air masses are not coming from arid regions. This happens especially when AOD values are relatively small (<0.3. The selection of the dust model reduces the correlation between ground based and MODIS AOD measurements in dust-free situations. Moreover, the current aerosol model selection scheme produces unphysical AE values. Our study suggests that the aerosol model combining is sensitive to the ratio of 660 nm and 2130 nm surface reflectances (slope(660/2130. Furthermore, the value of the slope in the algorithm is mainly dependent on the Normalized Difference Vegetation Index (NDVI. The current relationship of these two parameters in the algorithm is not supported by the surface albedo climatology derived from MODIS measurements. The use of a more physical relationship improves the AE retrieval at the studied sites. However, at some sites the AOD correspondence deteriorates when the new relationship is used.

  5. A novel putrescine importer required for type 1 pili-driven surface motility induced by extracellular putrescine in Escherichia coli K-12.

    Science.gov (United States)

    Kurihara, Shin; Suzuki, Hideyuki; Oshida, Mayu; Benno, Yoshimi

    2011-03-25

    Recently, many studies have reported that polyamines play a role in bacterial cell-to-cell signaling processes. The present study describes a novel putrescine importer required for induction of type 1 pili-driven surface motility. The surface motility of the Escherichia coli ΔspeAB ΔspeC ΔpotABCD strain, which cannot produce putrescine and cannot import spermidine from the medium, was induced by extracellular putrescine. Introduction of the gene deletions for known polyamine importers (ΔpotE, ΔpotFGHI, and ΔpuuP) or a putative polyamine importer (ΔydcSTUV) into the ΔspeAB ΔspeC ΔpotABCD strain did not affect putrescine-induced surface motility. The deletion of yeeF, an annotated putative putrescine importer, in the ΔspeAB ΔspeC ΔpotABCD ΔydcSTUV strain abolished surface motility in putrescine-supplemented medium. Complementation of yeeF by a plasmid vector restored surface motility. The surface motility observed in the present study was abolished by the deletion of fimA, suggesting that the surface motility is type 1 pili-driven. A transport assay using the yeeF(+) or ΔyeeF strains revealed that YeeF is a novel putrescine importer. The K(m) of YeeF (155 μM) is 40 to 300 times higher than that of other importers reported previously. On the other hand, the V(max) of YeeF (9.3 nmol/min/mg) is comparable to that of PotABCD, PotFGHI, and PuuP. The low affinity of YeeF for putrescine may allow E. coli to sense the cell density depending on the concentration of extracellular putrescine.

  6. Investigation of Thermostressed State of Coating Formation at Electric Contact Surfacing of “Shaft” Type Parts

    Directory of Open Access Journals (Sweden)

    Olena V. Berezshnaya

    2016-01-01

    Full Text Available The forming of coating at electric contact surfacing is considered. The mathematical model of the coating formation is developed. The method of numerical recurrent solution of the finite-difference form of static equilibrium conditions of the selected elementary volume of coating is used. This model considers distribution of thermal properties and geometric parameters along the thermal deformation zone during the process of electric contact surfacing by compact material. It is found that the change of value of speed asymmetry factor leads to increasing of the friction coefficient in zone of surfacing. This provides the forming of the coating of higher quality. The limitation of the technological capabilities of equipment for electric contact surfacing is related to the size of recoverable parts and application of high electromechanical powers. The regulation of the speed asymmetry factor allows for expanding the technological capabilities of equipment for electric contact surfacing. The nomograms for determination of the stress on the roller electrode and the finite thickness of the coating as the function of the initial thickness of the compact material and the deformation degree are shown.

  7. The Influence of Implant Abutment Surface Roughness and the Type of Cement on Retention of Implant Supported Crowns

    Science.gov (United States)

    Reddy, M. Sushender; Reddy, C. Rajaneesh; Pithani, Padmaja; R, Santosh Kumar; Kulkarni, Ganesh

    2015-01-01

    Objectives: To provide relative data on the retentive characters of the commonly used cements on different implant abutment surfaces. Materials and Methods: A total of 20 implant abutments were divided into 2 groups. Ten implants were unaltered and ten were air borne particle abraded with 50μ aluminium oxide. Three luting agents (Tempbond, IRM and ImProv) were used to secure the crowns to abutments. All the crowns were removed from the abutment with an Instron machine at 0.5mm per minute and tensile bond strengths were recorded. Statistical analysis was performed using Anova, Paired t-test and Post-Hoc tests. Results: IRM showed the highest mean tensile strength among the three cements when used with treated and untreated implant abutment surfaces. Change in the abutment surface roughness had no effect on the mean tensile bond strength of TempBond and IRM cements, whereas ImProv cement showed reduced tensile strength with sandblasted surface. Conclusion: When increased retention is required IRM cement with either sandblasted or milled surface could be used and when retrievability is required cements of choice could be either TempBond or ImProv. PMID:25954694

  8. Experimental Study on Heat Transfer and Pressure Drop Characteristics of Four Types of Plate Fin-and-Tube Heat Exchanger Surfaces

    Institute of Scientific and Technical Information of China (English)

    1994-01-01

    In this paper,air side heat transfer and pressure drop characteristics of twelve three-row plate fin-and-tube heat exchanger cores of four types of fin configurations have been experimentally investigated .The heat transfer and friction factor correlations for the twelve cores are provided in a wide range of Reynolds number.It is found that in the range of Reynolds number tested.the Nusselt number of the slotted fin surface is the largest and that of the plain plate fin is the lowest while the Nusselt numbers of two types of wavy fins are somewhere in between.

  9. MicroRNA miR-182 cluster mediated modulation of RECK without changes in cell surface membrane type-1 matrix metalloproteinase (MT1-MMP).

    Science.gov (United States)

    Silva, Milagros; Hernandez, Maria E; Rojas, Fausto; Li, Lihua; Subramanian, Subbaya; Wilson, Michael J

    2015-01-01

    Cell surface localized membrane type 1-matrix metalloproteinase (MT1-MMP) plays an important role in physiological and pathological processes and its function can be regulated by proteins such as RECK. We examined the ability of miR-182 (one of the miR-183 cluster miRNAs), which can target RECK, to control cell surface MT1-MMP activity. Expression of RECK mRNA and protein was increased with anti-miRs to miR-182, miR-183 or miR-96 in HT1080 fibrosarcoma cells, but, decreased RECK mRNA and increased its protein in the benign prostatic hyperplasia cell line BPH-1. Treatment of BPH-1 and HT-1080 cells with the anti-miRs did not change the level of cell surface MT1-MMP activity, nor their rate of migration in an in vitro wound-healing assay. Trichostatin A (TSA) did not increase the level of RECK, but blocked cell surface MT1-MMP activity and decreased cell motility. Anti-miRs mediated increased RECK levels did not interfere with cell surface MT1-MMP function, and TSA may block cell surface localization of MT1-MMP by a mechanism independent of RECK.

  10. Spectroscopic characterization of a single dangling bond on a bare Si(100)- c ( 4 × 2 ) surface for n - and p -type doping

    KAUST Repository

    Mantega, M.

    2012-07-19

    We investigate the charging state of an isolated single dangling bond formed on an unpassivated Si(100) surface with c(4×2) reconstruction, by comparing scanning tunneling microscopy and spectroscopy analysis with density functional theory calculations. The dangling bond is created by placing a single hydrogen atom on the bare surface with the tip of a scanning tunneling microscope. The H atom passivates one of the dimer dangling bonds responsible for the surface one-dimensional electronic structure. This leaves a second dangling at the reacted surface dimer which breaks the surface periodicity. We consider two possible H adsorption configurations for both the neutral and the doped situation (n- and p-type). In the case of n-doping we find that the single dangling bond state is doubly occupied and the most stable configuration is that with H bonded to the bottom Si atom of the surface dimer. In the case of p-doping the dangling bond is instead empty and the configuration with the H attached to the top atom of the dimer is the most stable. Importantly the two configurations have different scattering properties and phase shift fingerprints. This might open up interesting perspectives for fabricating a switching device by tuning the doping level or by locally charging the single dangling bond state. © 2012 American Physical Society.

  11. Vacuum-type space-like string surfaces in AdS{sub 3} x S{sup 3}

    Energy Technology Data Exchange (ETDEWEB)

    Dorn, Harald; Jorjadze, George; Kalousios, Chrysostomos; Wuttke, Sebastian [Institut fuer Physik der Humboldt-Universitaet zu Berlin, Newtonstrasse 15, D-12489 Berlin (Germany); Megrelidze, Luka, E-mail: dorn@physik.hu-berlin.de, E-mail: jorj@physik.hu-berlin.de, E-mail: ckalousi@physik.hu-berlin.de, E-mail: wuttke@physik.hu-berlin.de [Ilia State University, K Cholokashvili Ave 3/5, 0162, Tbilisi (Georgia)

    2011-01-14

    We construct and classify all space-like minimal surfaces in AdS{sub 3} x S{sup 3} which globally admit coordinates with constant-induced metric on both factors. Up to O(2, 2) x O(4) transformations all these surfaces, except one class, are parameterized by four real parameters. The classes of surfaces correspond to different regions in this parameter space and show quite different boundary behavior. Our analysis uses a direct construction of the string coordinates via a group theoretical treatment based on the map of AdS{sub 3} x S{sup 3} to SL(2,R) x SU(2). This is complemented by a cross check via standard Pohlmeyer reduction. After embedding in AdS{sub 5} x S{sup 5} we calculate the regularized area for solutions with a boundary spanned by a 4-point scattering s-channel momenta configuration.

  12. Evaluation of near-surface temperature, humidity, and equivalent temperature from regional climate models applied in type II downscaling

    Science.gov (United States)

    Pryor, S. C.; Schoof, J. T.

    2016-04-01

    Atmosphere-surface interactions are important components of local and regional climates due to their key roles in dictating the surface energy balance and partitioning of energy transfer between sensible and latent heat. The degree to which regional climate models (RCMs) represent these processes with veracity is incompletely characterized, as is their ability to capture the drivers of, and magnitude of, equivalent temperature (Te). This leads to uncertainty in the simulation of near-surface temperature and humidity regimes and the extreme heat events of relevance to human health, in both the contemporary and possible future climate states. Reanalysis-nested RCM simulations are evaluated to determine the degree to which they represent the probability distributions of temperature (T), dew point temperature (Td), specific humidity (q) and Te over the central U.S., the conditional probabilities of Td|T, and the coupling of T, q, and Te to soil moisture and meridional moisture advection within the boundary layer (adv(Te)). Output from all RCMs exhibits discrepancies relative to observationally derived time series of near-surface T, q, Td, and Te, and use of a single layer for soil moisture by one of the RCMs does not appear to substantially degrade the simulations of near-surface T and q relative to RCMs that employ a four-layer soil model. Output from MM5I exhibits highest fidelity for the majority of skill metrics applied herein, and importantly most realistically simulates both the coupling of T and Td, and the expected relationships of boundary layer adv(Te) and soil moisture with near-surface T and q.

  13. Myoscape controls cardiac calcium cycling and contractility via regulation of L-type calcium channel surface expression

    OpenAIRE

    Eden, Matthias; Meder, Benjamin; V?lkers, Mirko; Poomvanicha, Montatip; Domes, Katrin; Branchereau, M.; Marck, P.; Will, Rainer; Bernt, Alexander; Rangrez, Ashraf; Busch, Matthias; ,; Adler, Thure; Busch, Dirk H.; Antonio Aguilar-Pimentel, Juan

    2016-01-01

    Calcium signalling plays a critical role in the pathogenesis of heart failure. Here we describe a cardiac protein named Myoscape/FAM40B/STRIP2, which directly interacts with the L-type calcium channel. Knockdown of Myoscape in cardiomyocytes decreases calcium transients associated with smaller Ca2+ amplitudes and a lower diastolic Ca2+ content. Likewise, L-type calcium channel currents are significantly diminished on Myoscape ablation, and downregulation of Myoscape significantly reduces cont...

  14. Video Denoising based on Stationary Wavelet Transform and Center Weighted Median Filter

    Directory of Open Access Journals (Sweden)

    Soundarya K

    2014-01-01

    Full Text Available Noise removal using wavelet has the characteristic of preserving signal uniqueness even if noise is going to be minimized. Images are getting corrupted by impulse noise during image acquisition and transmission. A new median filter termed as the center weighted median filter (CWMF in the wavelet coefficient domain combined with stationary wavelet transform (SWT is proposed for video denoising. This filter iteratively smoothes the noisy wavelet coefficients variances preserving the edge information contained in the large magnitude wavelet coefficients. This Paper deals with uncompressed video of .avi format. The proposed algorithm works well for suppressing Gaussian noise with noise density from 10 to 70% while preserving image details. Simulation results show that higher peak signal to noise ratio can be obtained as compared to other recent image denoising methods.

  15. Poisson noise reduction from X-ray images by region classification and response median filtering

    Indian Academy of Sciences (India)

    THAKUR KIRTI; KADAM JITENDRA; SAPKAL ASHOK

    2017-06-01

    Medical imaging is perturbed with inherent noise such as speckle noise in ultrasound, Poisson noise in X-ray and Rician noise in MRI imaging. This paper focuses on X-ray image denoising problem. X-ray image quality could be improved by increasing dose value; however, this may result in cell death or similar kinds of issues. Therefore, image processing techniques are developed to minimise noise instead of increasing dose value for patient safety. In this paper, usage of modified Harris corner point detector to predict noisy pixels and responsive median filtering in spatial domain is proposed. Experimentation proved that the proposed work performs better than simple median filter and moving average (MA) filter. The results are very close to non-local means Poisson noise filter which is one of the current state-of-the-art methods. Benefits of the proposed work are simple noise prediction mechanism, good visual quality and less execution time.

  16. Robust K-Median and K-Means Clustering Algorithms for Incomplete Data

    Directory of Open Access Journals (Sweden)

    Jinhua Li

    2016-01-01

    Full Text Available Incomplete data with missing feature values are prevalent in clustering problems. Traditional clustering methods first estimate the missing values by imputation and then apply the classical clustering algorithms for complete data, such as K-median and K-means. However, in practice, it is often hard to obtain accurate estimation of the missing values, which deteriorates the performance of clustering. To enhance the robustness of clustering algorithms, this paper represents the missing values by interval data and introduces the concept of robust cluster objective function. A minimax robust optimization (RO formulation is presented to provide clustering results, which are insensitive to estimation errors. To solve the proposed RO problem, we propose robust K-median and K-means clustering algorithms with low time and space complexity. Comparisons and analysis of experimental results on both artificially generated and real-world incomplete data sets validate the robustness and effectiveness of the proposed algorithms.

  17. Median and Morphological Specialized Processors for a Real-Time Image Data Processing

    Directory of Open Access Journals (Sweden)

    Kazimierz Wiatr

    2002-01-01

    Full Text Available This paper presents the considerations on selecting a multiprocessor MISD architecture for fast implementation of the vision image processing. Using the author′s earlier experience with real-time systems, implementing of specialized hardware processors based on the programmable FPGA systems has been proposed in the pipeline architecture. In particular, the following processors are presented: median filter and morphological processor. The structure of a universal reconfigurable processor developed has been proposed as well. Experimental results are presented as delays on LCA level implementation for median filter, morphological processor, convolution processor, look-up-table processor, logic processor and histogram processor. These times compare with delays in general purpose processor and DSP processor.

  18. Oral leiomyomatous hamartoma of the median maxillary gingiva: a case report and review of the literature.

    Science.gov (United States)

    ALQahtani, Dalal; Qannam, Ahmed

    2013-08-01

    Oral leiomyomatous hamartoma (OLH) is a rare lesion seen in the oral cavity. It mainly presents on the median maxilla and tongue. In the literature in English, there are only 10 reported cases of OLH of the median maxilla. Most of the cases were found in patients of Japanese and Latin American origin. We report a case of OLH in an 18-month-old boy of Middle Eastern ancestry. The lesion presented as a pedunculated, light pink, soft swelling that was located on the labial gingiva of tooth number 21. Microscopically, it showed proliferative smooth-muscle fascicles dispersed in loose fibrous stroma and multiple small vessels. The lesional cells looked mature and elongated and were deeply eosinophilic spindle cells with basophilic, central "cigar-shaped" nuclei. The diagnosis of OLH was supported by positive immunohistochemical reactivity of smooth-muscle actin and desmin. To our knowledge, this is the first reported case of OLH in a Middle Eastern patient.

  19. Vector Nonlocal Euclidean Median: Principal Bundle Captures The Nature of Patch Space

    CERN Document Server

    Lin, Chen-Yun; Qi, Xin Jessica; Wu, Hau-Tieng

    2016-01-01

    We extensively study the rotational group structure inside the patch space by introducing the fiber bundle structure. The rotational group structure leads to a new image denoising algorithm called the \\textit{vector non-local Euclidean median} (VNLEM). The theoretical aspect of VNLEM is studied, which explains why the VNLEM and traditional non-local mean/non-local Euclidean median (NLEM) algorithm work. The numerical issue of the VNLEM is improved by taking the orientation feature in the commonly applied scale-invariant feature transform (SIFT), and a theoretical analysis of the robustness of the orientation feature in the SIFT is provided. The VNLEM is applied to an image database of 1,361 images and compared with the NLEM. Different image quality assessments based on the error-sensitivity or the human visual system are applied to evaluate the performance. The results confirmed the potential of the VNLEM algorithm.

  20. Effect of the Steindler procedure on the median nerve branches to the medial epicondylar muscles.

    Science.gov (United States)

    Chantelot, C; Feugas, C; Migaud, H; Guillem, F; Chapnikoff, D; Fontaine, C

    2000-06-01

    Usually the median nerve gives off six branches to the muscles arising from the medial epicondyle, which could be tightened during Steindler's procedure. We studied these branches before and after Steindler's procedure in 20 fresh cadavers and observed a considerable variation in the origin of the branches. The muscular branches arising from the median nerve did not seem to limit the mobilization of the medial epicondyle when performing Steindler's transfer. The limitation of the flexion observed after Steindler's procedure was mainly related to the tension of the transferred forearm flexor muscles. The variability of the origin of the branch to the flexor digitorum superficialis muscle could explain a lesion of this branch when Steindler's procedure is carried out with Brunelli's modification. The lateral transfer and the anterior transfer on to the humeral shaft did not influence the limitation of elbow flexion or result in tightness in any nerve branch to the transferred muscles.